Modélisation de matériaux chiraux à structures hétérogènes (modèle MTWC) : théorie, validations expérimentales et applications

NASA Astrophysics Data System (ADS)

Mariotte, F.; Sauviac, B.; Héliot, J. Ph.

1995-10-01

After a brief overview of the concept of electromagnetic chirality, this paper deals with a numerical simulation of isotropic composites with metallic chiral inclusions: computations of permittivity, permeability and chirality parameter as functions of frequency are presented. The theoretical results are, step by step, compared with measurements of chiral composites at microwave frequencies. The application of such media in Radar Cross-Section (RCS) management and control is discussed. The introduction of chiral inclusions seems to make impedance matching possible and may lead to attractive shields with lower reflectivity and larger bandwidth. However the optimization of material characteristics necessary to get a specific absorber remains a difficult task. Après un bref rappel du principe de la chiralité, cet article présente une modélisation des propriétés effectives des matériaux hétérogènes à inclusions chirales métalliques : calcul de la permittivité, perméabilité et coefficient de chiralité du composite en fonction de la fréquence. Les résultats théoriques sont validés, pas à pas, par des mesures effectuées sur des composites chiraux de natures différentes. L'application de tels matériaux à la conception de matériaux absorbant les ondes électromagnétiques est ensuite envisagée. Les inclusions chirales semblent offrir la possibilité de régler l'impédance à l'interface air-milieu absorbant permettant ainsi de concevoir des absorbants micro-ondes plus performants en terme d'atténuation ou de largeur de bande. L'optimisation des caractéristiques des matériaux pour obtenir des performances données restent néanmoins très délicate.

Integrated Design Analysis and Optimisation of Aircraft Structures (L’Analyse pour la Conception Integree et l’Optimisation des Structures d’Aeronefs)

DTIC Science & Technology

1992-02-01

Division (Code RM) ONERA Office of Aeronautics & Space Technology 29 ave de la Division Leclerc NASA Hq 92320 Chfitillon Washington DC 20546 France United...Vector of thickness variables. V’ = [ t2 ........ tN Vector of thickness changes. AV ’= [rt, 5t2 ......... tNJ TI 7-9 Vector of strain derivatives. F...ds, ds, I d, 1i’,= dt, dr2 ........ dt--N Vector of buckling derivatives. dX d). , dt1 dt2 dtN Then 5F= Vs’i . AV and SX V,’. AV The linearised

Conception de lois de pilotage robustes et sequencement de gains par l'approche de systemes lineaires a parametres variants

NASA Astrophysics Data System (ADS)

Hentabli, Kamel

Cette recherche s'inscrit dans le cadre du projet de recherche Active Control Technology entre l'Ecole de Technologie Superieure et le constructeur Bombardier Aeronautique . Le but est de concevoir des strategies de commandes multivariables et robustes pour des modeles dynamiques d'avions. Ces strategies de commandes devraient assurer a l'avion une haute performance et satisfaire des qualites de vol desirees en l'occurrence, une bonne manoeuvrabilite, de bonnes marges de stabilite et un amortissement des mouvements phugoides et rapides de l'avion. Dans un premier temps, nous nous sommes principalement interesses aux methodes de synthese LTI et plus exactement a l'approche Hinfinity et la mu-synthese. Par la suite, nous avons accorde un interet particulier aux techniques de commande LPV. Pour mener a bien ce travail, nous avons envisage une approche frequentielle, typiquement Hinfinity. Cette approche est particulierement interessante, dans la mesure ou le modele de synthese est construit directement a partir des differentes specifications du cahier des charges. En effet, ces specifications sont traduites sous forme de gabarits frequentiels, correspondant a des ponderations en entree et en sortie que l'on retrouve dans la synthese Hinfinity classique. Par ailleurs, nous avons utilise une representation de type lineaire fractionnelle (LFT), jugee mieux adaptee pour la prise en compte des differents types d'incertitudes, qui peuvent intervenir sur le systeme. De plus, cette representation s'avere tres appropriee pour l'analyse de la robustesse via les outils de la mu-analyse. D'autre part, afin d'optimiser le compromis entre les specifications de robustesse et de performance, nous avons opte pour une structure de commande a 2 degres de liberte avec modele de reference. Enfin, ces techniques sont illustrees sur des applications realistes, demontrant ainsi la pertinence et l'applicabilite de chacune d'elle. Mots cles. Commande de vol, qualites de vol et manoeuvrabilite, commande robuste, approche Hinfinity , mu-synthese, systemes lineaires a parametres variants, sequencement de gains, transformation lineaire fractionnelle, inegalite matricielle lineaire.

Algorithmes de couplage RANS et ecoulement potentiel

NASA Astrophysics Data System (ADS)

Gallay, Sylvain

Dans le processus de developpement d'avion, la solution retenue doit satisfaire de nombreux criteres dans de nombreux domaines, comme par exemple le domaine de la structure, de l'aerodynamique, de la stabilite et controle, de la performance ou encore de la securite, tout en respectant des echeanciers precis et minimisant les couts. Les geometries candidates sont nombreuses dans les premieres etapes de definition du produit et de design preliminaire, et des environnements d'optimisations multidisciplinaires sont developpes par les differentes industries aeronautiques. Differentes methodes impliquant differents niveaux de modelisations sont necessaires pour les differentes phases de developpement du projet. Lors des phases de definition et de design preliminaires, des methodes rapides sont necessaires afin d'etudier les candidats efficacement. Le developpement de methodes ameliorant la precision des methodes existantes tout en gardant un cout de calcul faible permet d'obtenir un niveau de fidelite plus eleve dans les premieres phases de developpement du projet et ainsi grandement diminuer les risques associes. Dans le domaine de l'aerodynamisme, les developpements des algorithmes de couplage visqueux/non visqueux permettent d'ameliorer les methodes de calcul lineaires non visqueuses en methodes non lineaires prenant en compte les effets visqueux. Ces methodes permettent ainsi de caracteriser l'ecoulement visqueux sur les configurations et predire entre autre les mecanismes de decrochage ou encore la position des ondes de chocs sur les surfaces portantes. Cette these se focalise sur le couplage entre une methode d'ecoulement potentiel tridimensionnelle et des donnees de section bidimensionnelles visqueuses. Les methodes existantes sont implementees et leurs limites identifiees. Une methode originale est ensuite developpee et validee. Les resultats sur une aile elliptique demontrent la capacite de l'algorithme a de grands angles d'attaques et dans la region post-decrochage. L'algorithme de couplage a ete compare a des donnees de plus haute fidelite sur des configurations issues de la litterature. Un modele de fuselage base sur des relations empiriques et des simulations RANS a ete teste et valide. Les coefficients de portance, de trainee et de moment de tangage ainsi que les coefficients de pression extraits le long de l'envergure ont montre un bon accord avec les donnees de soufflerie et les modeles RANS pour des configurations transsoniques. Une configuration a geometrie hypersustentatoire a permis d'etudier la modelisation des surfaces hypersustentees de la methode d'ecoulement potentiel, demontrant que la cambrure peut etre prise en compte uniquement dans les donnees visqueuses.

Les Cicatrices Retractiles Post-Brulures Du Membre Inferieur Chez L’Enfant

PubMed Central

Sankale, A.A.; Manyacka Ma Nyemb, P.; Coulibaly, N.F.; Ndiaye, A.; Ndoye, M.

2010-01-01

Summary Il s'agit d'une étude faisant ressortir les aspects épidémiologiques, cliniques et thérapeutiques des séquelles de brûlures du membre inférieur chez l'enfant, à propos de 42 cas colligés au service de chirurgie infantile de l'Hôpital Aristide Le Dantec (Sénégal). L'âge moyen retrouvé est de 5 ans et 3 mois, et le sex-ratio garçons/filles de 1,8/1. La brûlure thermique est causée par une flamme dans 33% des cas, par un liquide chaud dans 21% des cas, et par des braises dans 21% des cas. Les cicatrices rétractiles intéressent le genou et le creux poplité dans 47% des cas et le pied dans 45% des cas. Elles sont bilatérales dans 21% des cas, et concernent une autre localisation associée dans 21% des cas. Quant aux brides, 21% ont bénéficié d'une chirurgie, avec un délai moyen de 3 ans et 2 mois après la brûlure. Cette procédure chirurgicale consiste en une plastie en Z dans 91% des cas, à laquelle est associée une greffe de peau dans 54% des cas. Une rééducation fonctionnelle est pratiquée chez 54% des opérés. Parallèlement aux données de la littérature, nos résultats montrent que l'optimisation de la prise en charge passe par une meilleure prévention des accidents domestiques et une bonne codification thérapeutique. PMID:21991202

Evaluation experimentale et theorique du comportement a la flexion de nouveaux poteaux en materiaux composites

NASA Astrophysics Data System (ADS)

Metiche, Slimane

La demande croissante en poteaux pour les differents reseaux d'electricite et de telecommunications a rendu necessaire l'utilisation de materiaux innovants, qui preservent l'environnement. La majorite des poteaux electriques existants au Canada ainsi qu'a travers le monde, sont fabriques a partir de materiaux traditionnels tel que le bois, le beton ou l'acier. Les motivations des industriels et des chercheurs a penser a d'autres solutions sont diverses, citons entre autre: La limitation en longueur des poteaux en bois ainsi que la vulnerabilite des poteaux fabriques en beton ou en acier aux agressions climatiques. Les nouveaux poteaux en materiaux composites se presentent comme de bons candidats a cet effet, cependant; leur comportement structural n'est pas connu et des etudes theoriques et experimentales approfondies sont necessaires avant leur mise en marche a grande echelle. Un programme de recherche intensif comportant plusieurs projets experimentaux, analytiques et numeriques est en cours a l'Universite de Sherbrooke afin d'evaluer le comportement a court et a long termes de ces nouveaux poteaux en Polymeres Renforces de Fibres (PRF). C'est dans ce contexte que s'inscrit la presente these, et notre recherche vise a evaluer le comportement a la flexion de nouveaux poteaux tubulaires coniques fabriques en materiaux composites par enroulement filamentaire et ce, a travers une etude theorique, ainsi qu'a travers une serie d'essais de flexion en "grandeur reelle" afin de comprendre le comportement structural de ces poteaux, d'optimiser la conception et de proposer une procedure de dimensionnement pour les utilisateurs. Les poteaux en Polymeres Renforces de Fibres (PRF) etudies dans cette these sont fabriques avec une resine epoxyde renforcee de fibres de verre type E. Chaque type poteaux est constitue principalement de trois zones ou les proprietes geometriques (epaisseur, diametre) et les proprietes mecaniques sont differentes d'une zone a l'autre. La difference entre ces proprietes est due au nombre de couches utilisees dans chaque zone ainsi qu'a l'orientation des fibres de chaque couche. Un total de vingt-trois prototypes de dimensions differentes; ont ete testes en flexion jusqu'a la rupture. Deux types de fibres de verre de masses lineaires differentes, ont ete utilisees afin d'evaluer l'effet du type de fibres sur le comportement a la flexion. Un nouveau montage experimental permettant de tester tous les types de poteaux en PRF a ete dimensionne et fabrique selon les recommandations decrites dans les normes ASTM D 4923-01 et ANSI C 136.20-2005. Un modele analytique base sur la theorie des poutres en elasticite lineaire est propose dans cette these. Ce modele predit avec une bonne precision le comportement experimental charge---deflexion ainsi que la deflexion maximale au sommet des poteaux en PRF; constitues de plusieurs zones de caracteristiques geometriques et mecaniques differentes. Une procedure de dimensionnement des poteaux en PRF, basee sur les resultats experimentaux obtenus dans le cadre de la presente these, est egalement proposee. Les resultats obtenus dans le cadre de la presente these permettront le developpement et l'amelioration des regles de conception utiles et pratiques a l'usage des concepteurs et des industriels du domaine des poteaux en PRF. Les retombees de cette recherche sont a la fois economiques et technologiques, car les resultats obtenus constitueront une banque de donnees qui contribueront au developpement des normes de calcul, et par consequent a l'optimisation des materiaux utilises, et serviront a valider de futurs resultats et modeles theoriques.

Optimisation de l'émission du continuum femtoseconde de lumière blanche entre 600 nm et 800 nm

NASA Astrophysics Data System (ADS)

Ramstein, S.; Mottin, S.

2005-06-01

Un dispositif de spectroscopie avec résolution du temps de vol des photons en milieu diffus a été développé. Celui-ci repose sur l'utilisation d'un continuum de lumière blanche généré par focalisation d'un laser amplifié (830 nm, 1 kHz, 0.5 W, 170 fs) dans de l'eau déminéralisée. Afin d'optimiser spectralement et en puissance la source blanche sur la fenêtre spectrale 600 800 nm, une étude de la mise en forme spatio-temporelle avant autofocalisation de l'impulsion laser par le milieu a été menée. Cette mise en forme est effectuée de manière spatiale en changeant la focale de la lentille de focalisation et de manière temporelle en changeant le taux de compression de l'impulsion. L'étude montre que le cône de lumière émise possède plus de puissance dans la fenêtre spectrale d'intérêt pour des focales longues. Sur la fenêtre 600-800 nm, le rendement énergétique intégré varie de 5%, avec une focalef=6cm, à 15%, avec une focale f = 30 cm. La mise en forme temporelle montre des effets similaires avec les mêmes ordres de grandeur.

Comparaison de méthodes d'identification des paramètres d'une machine asynchrone

NASA Astrophysics Data System (ADS)

Bellaaj-Mrabet, N.; Jelassi, K.

1998-07-01

Interests, in Genetic Algorithms (G.A.) expands rapidly. This paper consists initially to apply G.A. for identifying induction motor parameters. Next, we compare the performances with classical methods like Maximum Likelihood and classical electrotechnical methods. These methods are applied on three induction motors of different powers to compare results following a set of criteria. Les algorithmes génétiques sont des méthodes adaptatives de plus en plus utilisée pour la résolution de certains problèmes d'optimisation. Le présent travail consiste d'une part, à mettre en œuvre un A.G sur des problèmes d'identification des machines électriques, et d'autre part à comparer ses performances avec les méthodes classiques tels que la méthode du maximum de vraisemblance et la méthode électrotechnique basée sur des essais à vides et en court-circuit. Ces méthodes sont appliquées sur des machines asynchrones de différentes puissances. Les résultats obtenus sont comparés selon certains critères, permettant de conclure sur la validité et la performance de chaque méthode.

Approaches to S&T Cost Modeling at the U.S. Air Force Research Laboratory/Vehicle Aeronautics Directorate

DTIC Science & Technology

2000-09-01

fassent, si rien ne change par ailleurs. plus proche de l’ing~ni~rie du vivant . Une vdritable optimisation des 6ldinents de soutien logistique A bord...s souvent dans les arbres l’utilisation en service. fonctionnels, peuvent 8tre recueillies plus facilement dans un tableau crois6 avec les divers syst

Principes et réalisation d'une chaîne laser femtoseconde haute intensité basée sur le saphir dopé au titane

NASA Astrophysics Data System (ADS)

Le Blanc, Catherine

We present the initial study, the realisation and the characterisation of a high intensity femtosecond laser chain. This chain is able to produce intensities higher than 10^18 W/cm2 on target, at a 10 Hertz repetition rate. We present first fondamentals principles of chirped pulse propagation mechanisms: group velocity dispersion, self-phase modulation, self-focusing, and gain saturation. Then after describing the spectroscopic properties of titanium doped sapphire (Ti:S), we discuss near infrared femtosecond oscillators able to be amplified in Ti:S medium, and describe our home made Kerr Lens mode locked femtosecond Ti:S oscillator. The high intensity laser chain is based on the Chirped Pulse Amplification concept, which consists in stretching the pulse before its amplification in order to avoid non-linear effects such self-focusing or breakdown, and then recompressing it to its initial pulse duration. We have developed two compact and efficient multipass amplifiers for femtosecond chirped pulse amplification. With only two of these devices, we obtain an amplification factor of 10^8, which corresponds to a peak power of ˜ 0.5 terawatt after compression. We analyse in details the performances of this system and its advantages in terms of its high quantum yield (0.3), flexibility, and optical quality. Some observed spectral distortion on chirped pulses is simply explained by a gain saturation model. High dynamic pulse temporal control is crucial for interaction experiments. For this reason, we have developed a third order sampling autocorrelator. This device is able to measure 100 fs pulses with more than 8 orders of magnitude. I compare our obtained performances to other femtosecond systems and I analyse the best way to increase the energy, reduce the pulse duration and optimise focusing in order to reach the 10^19 W/cm2 regime. Ce mémoire présente les études préliminaires, la réalisation et la caractérisation d'une chaîne dite "de haute intensité" en régime femtosecondes. Cette installation est capable de produire sur cible des intensités supérieures à 10^18 W/cm2 à une récurrence de 10 tirs par seconde. Nous présentons tout d'abord les principes fondamentaux de la propagation d'impulsions étirées dans un milieu amplificateur en mettant en évidence les principaux mécanismes mis en jeu dans ce processus : la dispersion de vitesse de groupe, l'automodulation de phase, l'autofocalisation et la saturation du gain. Une analyse des différentes possibilités quant au choix de la source initiale capable d'émettre des impulsions de durée femtoseconde dans le domaine du proche infrarouge est réalisée après la présentation des caractéristiques spectroscopiques du saphir dopé au titane. Sont en particulier décrits en détail le principe et le fonctionnement de l'oscillateur au saphir dopé au titane à autoblocage de modes que nous avons construit à cet effet. L'amplification jusqu'aux puissances de l'ordre du terawatt repose sur le concept "CPA" d'amplification d'impulsions à dérive de fréquence. Nous explorons ici la voie des amplificateurs à multipassages suivant des configurations déjà développées pour les amplificateurs à colorants. Une attention particulière a été portée sur les méthodes de réglage, la fiabilité, la stabilité et la qualité du profil spatial du faisceau. D'autre part, une modélisation rend parfaitement compte des effets de saturation dans les amplificateurs. Les impulsions obtenues après compression ont une énergie de l'ordre de 60 mJ et une durée de l'ordre de 130 fs. La partie suivante est consacrée à une étude des problèmes d'étirement et de recompression pour tenter d'expliquer les raisons de cette recompression imparfaite. Finalement, un paramètre encore plus crucial pour la physique de l'interaction sur cible solide sans création d'un préplasma est le contraste des impulsions. Nous décrivons donc l'appareil de mesure capable d'effectuer des autocorrélations avec une dynamique dépassant 10^8 permettant d'observer un éventuel pied d'énergie à ce niveau. Les problèmes de propagation d'impulsions lumineuses ultra intenses sont ensuite abordés, pour optimiser la focalisation du faisceau jusqu'à des intensités de 10^18 W/cm2. Dans une discussion finale, les performances de cette installation sont comparées à celles des systèmes développés par ailleurs et nous réalisons une étude plus prospective des étapes à mettre en oeuvre afin d'augmenter l'énergie amplifiée, diminuer la durée des impulsions et optimiser la focalisation, le but à atteindre étant le régime des 10^19 W/cm2.

Effet de l'énergie du faisceau d'ions servant à l'assistance du dépôt de matériaux organiques utilisés pour réaliser des diodes électroluminescentes

NASA Astrophysics Data System (ADS)

Antony, R.; Moliton, A.; Ratier, B.

1998-06-01

Light emitting diode based on the structure ITO/Alq3/Ca-Al lead to enhanced quantum efficiency when the Alq3 active layer is obtained by IBAD (Ion Beam Assisted Deposition): with Iodine ions, the optimization (quantum efficiency multiplied by a factor10) is obtained for an ion energy equal to 100eV. La réalisation de diodes électroluminescentes basées sur la structure ITO/Alq3/Ca-Al conduit à des performances améliorées lorsque le dépôt de la couche active Alq3 est effectué avec l'assistance d'un faisceau d'ions; l'optimisation (rendement quantique interne accru d'un ordre de grandeur) correspond à des ions Iode d'énergie 100eV.

Design of optimised backstepping controller for the synchronisation of chaotic Colpitts oscillator using shark smell algorithm

NASA Astrophysics Data System (ADS)

Fouladi, Ehsan; Mojallali, Hamed

2018-01-01

In this paper, an adaptive backstepping controller has been tuned to synchronise two chaotic Colpitts oscillators in a master-slave configuration. The parameters of the controller are determined using shark smell optimisation (SSO) algorithm. Numerical results are presented and compared with those of particle swarm optimisation (PSO) algorithm. Simulation results show better performance in terms of accuracy and convergence for the proposed optimised method compared to PSO optimised controller or any non-optimised backstepping controller.

Etude de la transmission sonore a travers un protecteur de type "coquilles" : modelisation numerique et validation experimentale

NASA Astrophysics Data System (ADS)

Boyer, Sylvain

On estime que sur les 3,7 millions des travailleurs au Quebec, plus de 500 000 sont exposes quotidiennement a des niveaux de bruits pouvant causer des lesions de l'appareil auditif. Lorsqu'il n'est pas possible de diminuer le niveau de bruit environnant, en modifiant les sources de bruits, ou en limitant la propagation du son, le port de protecteurs auditifs individualises, telles que les coquilles, demeure l'ultime solution. Bien que vue comme une solution a court terme, elle est communement employee, du fait de son caractere peu dispendieux, de sa facilite d'implantation et de son adaptabilite a la plupart des operations en environnement bruyant. Cependant les protecteurs auditifs peuvent etre a la fois inadaptes aux travailleurs et a leur environnement et inconfortables ce qui limite leur temps de port, reduisant leur protection effective. Afin de palier a ces difficultes, un projet de recherche sur la protection auditive intitule : " Developpement d'outils et de methodes pour ameliorer et mieux evaluer la protection auditive individuelle des travailleur ", a ete mis sur pied en 2010, associant l'Ecole de technologie superieure (ETS) et l'Institut de recherche Robert-Sauve en sante et en securite du travail (IRSST). S'inscrivant dans ce programme de recherche, le present travail de doctorat s'interesse specifiquement a la protection auditive au moyen de protecteurs auditifs " passifs " de type coquille, dont l'usage presente trois problematiques specifiques presentees dans les paragraphes suivants. La premiere problematique specifique concerne l'inconfort cause par exemple par la pression statique induite par la force de serrage de l'arceau, qui peut reduire le temps de port recommande pour limiter l'exposition au bruit. Il convient alors de pouvoir donner a l'utilisateur un protecteur confortable, adapte a son environnement de travail et a son activite. La seconde problematique specifique est l'evaluation de la protection reelle apportee par le protecteur. La methode des seuils auditifs REAT (Real Ear Attenuation Threshold) aussi vu comme un "golden standard" est utilise pour quantifier la reduction du bruit mais surestime generalement la performance des protecteurs. Les techniques de mesure terrains, telles que la F-MIRE (Field Measurement in Real Ear) peuvent etre a l'avenir de meilleurs outils pour evaluer l'attenuation individuelle. Si ces techniques existent pour des bouchons d'oreilles, elles doivent etre adaptees et ameliorees pour le cas des coquilles, en determinant l'emplacement optimal des capteurs acoustiques et les facteurs de compensation individuels qui lient la mesure microphonique a la mesure qui aurait ete prise au tympan. La troisieme problematique specifique est l'optimisation de l'attenuation des coquilles pour les adapter a l'individu et a son environnement de travail. En effet, le design des coquilles est generalement base sur des concepts empiriques et des methodes essais/erreurs sur des prototypes. La piste des outils predictifs a ete tres peu etudiee jusqu'a present et meriterait d'etre approfondie. L'utilisation du prototypage virtuel, permettrait a la fois d'optimiser le design avant production, d'accelerer la phase de developpement produit et d'en reduire les couts. L'objectif general de cette these est de repondre a ces differentes problematiques par le developpement d'un modele de l'attenuation sonore d'un protecteur auditif de type coquille. A cause de la complexite de la geometrie de ces protecteurs, la methode principale de modelisation retenue a priori est la methode des elements finis (FEM). Pour atteindre cet objectif general, trois objectifs specifiques ont ete etablis et sont presentes dans les trois paragraphes suivants. (Abstract shortened by ProQuest.).

Amelioration de l'efficacite energetique du procede d'electrolyse de l'aluminium conception d'un nouveau bloc cathodique

NASA Astrophysics Data System (ADS)

Blais, Mathieu

Au Quebec, les alumineries sont de grandes consommatrices d'energie electrique, soit pres de 14 % de la puissance installee d'Hydro-Quebec. Dans ce contexte, des petits gains en efficacite energetique des cuves d'electrolyse pourraient avoir un impact important sur la reduction globale de la consommation d'electricite. Le projet de maitrise decrit dans cette etude repond a la problematique suivante : comment l'optimisation de la geometrie d'un bloc cathodique en vue d'uniformiser la densite de courant peut augmenter l'efficacite energetique et la duree de vie de la cuve d'aluminium? Le but premier du projet est de modifier la geometrie en vue d'ameliorer le comportement thermoelectrique des blocs cathodiques et d'accroitre par le fait meme l'efficacite energetique du procede de production d'aluminium. La mauvaise distribution de la densite de courant dans la cuve est responsable de certains problemes energetiques ayant des impacts negatifs sur l'economie et l'environnement. Cette non-uniformite de la distribution du courant induit une usure prematuree de la surface de la cathode et contribue a reduire la stabilite magnetohydrodynamique de la nappe de metal liquide. Afin de quantifier les impacts que peut avoir l'uniformisation de la densite de courant a travers le bloc cathodique, un modele d'un bloc cathodique d'une cuve de la technologie AP-30 a ete concu et analyse par elements finis. A partir de son comportement thermoelectrique et de donnees experimentales d'une cuve AP-30 tirees de la litterature, une correlation entre le profil de densite de courant a la surface du bloc et le taux d'erosion local au meme endroit a ete creee. Cette relation correspond au modele predictif de la duree de vie de tout bloc du meme materiau a partir de son profil de densite de courant. Ensuite, une programmation a ete faite incorporant dans une meme fonction cout les impacts economiques de la duree de vie, de la chute de voltage cathodique et de l'utilisation de nouveaux materiaux. Ceci a permis d'evaluer les benefices faits a partir d'un bloc modifie par rapport au bloc de reference. Plusieurs parametres geometriques du bloc sont variables sur un domaine realiste et l'integration d'un composant en materiau plus conducteur y a egalement ete etudiee. Utilisant des outils mathematiques d'optimisation, un design de bloc optimal a pu etre trouve. Les resultats demontrent qu'il est possible de generer des economies a partir de la modification du bloc. Il est egalement prouve que l'uniformisation de la densite de courant a travers le bloc peut apporter de grands avantages economiques et environnementaux dans le procede d'electrolyse de l'aluminium. Les resultats de cette etude serviront d'arguments pour les chercheurs dans l'industrie a savoir s'il vaut la peine d'investir ou non dans la fabrication d'un prototype experimental souvent tres couteux. Mots-cles : Efficacite energetique, electrolyse de l'aluminium, cathode, simulation thermoelectrique, uniformisation de la densite de courant, optimisation.

Contrôle cohérent de la dynamique de fragmentation d'agrégats alcalins

NASA Astrophysics Data System (ADS)

Lindinger, A.; Lupulescu, C.; Le Roux, J.; Bartelt, A.; Vajda, Š.; Wöste, L.

2004-11-01

Les agrégats métalliques présentent des propriétés extraordinaires, en particulier chimiques et catalytiques, qui dépendent fortement de leur taille. Ce comportement en fait des candidats idéaux pour l'analyse en temps réel de processus photo-induits ultrarapides, le but ultime étant la conduite de scénarios de contrôle cohérent. Nous avons réalisé des expériences d'ionisation multiphotonique non stationnaire sur de petits agrégats alcalins de différentes tailles et dans différents états électroniques rovibrationnels, y compris leur état fondamental, sondant ainsi leur dynamique ondulatoire, leur orientation structurelle, leur transfert de charge et leur dissociation. Les processus observés dépendent grandement des paramètres du faisceau laser d'excitation, tels que sa phase, son amplitude et sa durée ; cette sensibilité plaide pour l'emploi d'un système de contrôle rétroactif permettant de générer les formes d'impulsion optimales. Les caractéristiques spectrales et temporelles de ces dernières reflètent les propriétés du système étudié ainsi que les processus photochimiques que l'irradiation y induit. Nous présentons d'abord la dynamique vibrationelle d'états électroniques excités, liés, dissociatifs et prédissociatifs, des dimères et trimères alcalins. Suit une description du principe d'observation par pompage optique par effet Raman stimulé de la dynamique d'un paquet d'onde dans l'état électronique fondamental. Puisque les paramètres de l'impulsion d'excitation influencent de façon significative le poids des différentes trajectoires dans l'espace des phases, nous avons mené des expériences sur les canaux de fragmentation concurrents d'une réaction photo-induite, en étudiant les différents embranchements des voies d'ionisation et de fragmentation de Na{2}K excité électroniquement. L'utilisation d'un algorithme évolutif, pour l'optimisation de la phase et de l'amplitude de l'onde électromagnétique appliquée, permit d'influencer significativement la quantité résultante d'ions parents ou fragments. Des propriétés intéressantes sont déduites de la forme des impulsions laser optimales obtenues, qui révèlent la période de vibration moléculaire et qui, combinées aux courbes de potentiel, permettent de proposer les trajectoires que l'optimisation impose aux paquets d'onde. Pour finir, nous avons étudié comment une variété plus grande d'agrégats, en contribuant au canal de fragmentation NaK, influe sur la forme optimale d'impulsion. Là encore, la structure de cette dernière apporte des éclaircissements sur les canaux de fragmentation empruntés durant le processus de contrôle.

Modelisation de photodetecteurs a base de matrices de diodes avalanche monophotoniques pour tomographie d'emission par positrons

NASA Astrophysics Data System (ADS)

Corbeil Therrien, Audrey

La tomographie d'emission par positrons (TEP) est un outil precieux en recherche preclinique et pour le diagnostic medical. Cette technique permet d'obtenir une image quantitative de fonctions metaboliques specifiques par la detection de photons d'annihilation. La detection des ces photons se fait a l'aide de deux composantes. D'abord, un scintillateur convertit l'energie du photon 511 keV en photons du spectre visible. Ensuite, un photodetecteur convertit l'energie lumineuse en signal electrique. Recemment, les photodiodes avalanche monophotoniques (PAMP) disposees en matrice suscitent beaucoup d'interet pour la TEP. Ces matrices forment des detecteurs sensibles, robustes, compacts et avec une resolution en temps hors pair. Ces qualites en font un photodetecteur prometteur pour la TEP, mais il faut optimiser les parametres de la matrice et de l'electronique de lecture afin d'atteindre les performances optimales pour la TEP. L'optimisation de la matrice devient rapidement une operation difficile, car les differents parametres interagissent de maniere complexe avec les processus d'avalanche et de generation de bruit. Enfin, l'electronique de lecture pour les matrices de PAMP demeure encore rudimentaire et il serait profitable d'analyser differentes strategies de lecture. Pour repondre a cette question, la solution la plus economique est d'utiliser un simulateur pour converger vers la configuration donnant les meilleures performances. Les travaux de ce memoire presentent le developpement d'un tel simulateur. Celui-ci modelise le comportement d'une matrice de PAMP en se basant sur les equations de physique des semiconducteurs et des modeles probabilistes. Il inclut les trois principales sources de bruit, soit le bruit thermique, les declenchements intempestifs correles et la diaphonie optique. Le simulateur permet aussi de tester et de comparer de nouvelles approches pour l'electronique de lecture plus adaptees a ce type de detecteur. Au final, le simulateur vise a quantifier l'impact des parametres du photodetecteur sur la resolution en energie et la resolution en temps et ainsi optimiser les performances de la matrice de PAMP. Par exemple, l'augmentation du ratio de surface active ameliore les performances, mais seulement jusqu'a un certain point. D'autres phenomenes lies a la surface active, comme le bruit thermique, provoquent une degradation du resultat. Le simulateur nous permet de trouver un compromis entre ces deux extremes. Les simulations avec les parametres initiaux demontrent une efficacite de detection de 16,7 %, une resolution en energie de 14,2 % LMH et une resolution en temps de 0.478 ns LMH. Enfin, le simulateur propose, bien qu'il vise une application en TEP, peut etre adapte pour d'autres applications en modifiant la source de photons et en adaptant les objectifs de performances. Mots-cles : Photodetecteurs, photodiodes avalanche monophotoniques, semiconducteurs, tomographie d'emission par positrons, simulations, modelisation, detection monophotonique, scintillateurs, circuit d'etouffement, SPAD, SiPM, Photodiodes avalanche operees en mode Geiger

Transport aérien longue distance des brûlés graves: revue de la littérature et application pratique

PubMed Central

Leclerc, T.; Hoffmann, C.; Forsans, E.; Cirodde, A.; Boutonnet, M.; Jault, P.; Tourtier, J.-P.; Bargues, L.; Donat, N.

2015-01-01

Summary Les brûlés graves nécessitent une prise en charge multidisciplinaire dans des centres hautement spécialisés. La rareté de ces centres impose souvent le transport aérien médicalisé longue distance. Cependant, il y a peu de données publiées sur ces transferts. Dans cette mise au point, pour optimiser la prise en charge des brûlés dès qu’un transport aérien est décidé ou même seulement envisagé, nous proposons d’extraire de cette littérature limitée des principes simples s’appuyant aussi sur l’expérience pratique du Service de Santé des Armées françaises. Nous décrivons d’abord comment les contraintes aéronautiques peuvent affecter le transport de brûlés graves à bord d’aéronefs. Nous abordons ensuite la régulation de ces missions, en analysant les risques associés au transport aérien des brûlés graves et leurs implications sur les indications, la chronologie et les modalités du transport. Enfin, nous développons la conduite de la mission, comprenant la préparation du matériel et des consommables avant le vol, l’évaluation et la mise en condition du patient avant l’embarquement, et la poursuite de la prise en charge en vol. PMID:26668564

Strategies facilitant les tests en pre-certification pour la robustesse a l'egard des radiations =

NASA Astrophysics Data System (ADS)

Souari, Anis

Les effets des radiations cosmiques sur l'electronique embarquee preoccupent depuis. quelques decennies les chercheurs interesses par la robustesse des circuits integres. Plusieurs. recherches ont ete menees dans cette direction, principalement pour les applications spatiales. ou l’environnement de leur deploiement est hostile. En effet, ces environnements sont denses. en termes de particules qui, lorsqu’elles interagissent avec les circuits integres, peuvent. mener a leur dysfonctionnement, voir meme a leur destruction. De plus, les effets des. radiations s’accentuent pour les nouvelles generations des circuits integres ou la diminution. de la taille des transistors et l’augmentation de la complexite de ces circuits augmentent la. probabilite d’apparition des anomalies et par consequence la croissance des besoins de test. L’expansion de l’electronique grand public (commercial off-the-shelf, COTS) et l’adoption. de ces composants pour des applications critiques comme les applications avioniques et. spatiales incitent egalement les chercheurs a doubler les efforts de verification de la fiabilite. de ces circuits. Les COTS, malgre leurs meilleures caracteristiques en comparaison avec les. circuits durcis tolerants aux radiations qui sont couteux et en retard en termes de technologie. utilisee, sont vulnerables aux radiations. Afin d’ameliorer la fiabilite de ces circuits, une evaluation de leur vulnerabilite dans les. differents niveaux d’abstraction du flot de conception est recommandee. Ceci aide les. concepteurs a prendre les mesures de mitigation necessaires sur le design au niveau. d’abstraction en question. Enfin, afin de satisfaire les exigences de tolerance aux pannes, des. tests tres couteux de certification, obtenus a l’aide de bombardement de particules (protons, neutrons, etc.), sont necessaires. Dans cette these, nous nous interessons principalement a definir une strategie de precertification. permettant d’evaluer d’une facon realiste la sensibilite des circuits integres face. aux effets des radiations afin d’eviter d’envoyer des circuits non robustes a la phase tres. couteuse de la certification. Les circuits cibles par nos travaux sont les circuits integres. programmables par l’usager (FPGA) a base de memoire SRAM et le type de pannes ciblees, causees par les radiations, est les SEU (single event upset) consistant a un basculement de. l’etat logique d’un element de memoire a son complementaire. En effet, les FPGA a base de. memoire SRAM sont de plus en plus demandes par la communaute de l’aerospatial grace a. leurs caracteristiques de prototypage rapide et de reconfiguration sur site mais ils sont. vulnerables face aux radiations ou les SEU sont les pannes les plus frequentes dans les. elements de memoire de type SRAM. Nous proposons une nouvelle approche d’injection de. pannes par emulation permettant de mimer les effets des radiations sur la memoire de. configuration des FPGA et de generer des resultats les plus fideles possibles des resultats des. tests de certification. Cette approche est basee sur la consideration de la difference de. sensibilite des elements de memoire de configuration lorsqu’ils sont a l’etat '1' et a l’etat '0', observee sous des tests acceleres sous faisceaux de protons au renomme laboratoire. TRIUMF, dans la procedure de generation des sequences de test dans le but de mimer la. distribution des pannes dans la memoire de configuration. Les resultats des experimentations. de validation montrent que la strategie proposee est efficace et genere des resultats realistes. Ces resultats revelent que ne pas considerer la difference de sensibilite peut mener a une. sous-estimation de la sensibilite des circuits face aux radiations. Dans la meme optique d’optimisation de la procedure d’injection des pannes par emulation, a. savoir le test de pre-certification, nous proposons une methodologie permettant de maximiser. la detection des bits critiques (bits provoquant une defaillance fonctionnelle s’ils changent. d’etat) pour un nombre bien determine de SEU (qui est le modele de pannes adopte) ou de. maximiser la precision de l’estimation de nombre des bits critiques. Pour ce faire, une. classification des bits de configuration en differents ensembles est tout d’abord mise en. oeuvre, selon leur contenu, les ressources qu’ils configurent et leur criticite. Ensuite, une. evaluation de la sensibilite de chaque ensemble est accomplie. Enfin, la priorisation. d’injection des pannes dans les ensembles les plus sensibles est recommandee. Plusieurs. scenarios d’optimisation d’injection des pannes sont proposes et les resultats sont compares. avec ceux donnes par la methode conventionnelle d’injection aleatoire des pannes. La. methodologie d’optimisation proposee assure une amelioration de plus de deux ordres de. grandeur. Une derniere approche facilitant l’evaluation de la sensibilite des bits configurant les LUT. (look up table) de FPGA, les plus petites entites configurables du FPGA permettant. d’implementer des fonctions combinatoires, utilises par un design est presentee. Elle permet. l’identification facile et sans cout en termes d’utilisation du materiel ou d’outils externes des. bits des LUT. L’approche proposee est simple et efficace, offrant une couverture de pannes. de 100 % et applicable aux nouvelles generations des FPGA de Xilinx. Les approches proposees contribuent a repondre aux exigences du cahier des charges de cette. these et a achever les objectifs definis. Le realisme et la maximisation de l’estimation de la. vulnerabilite des circuits sous test offerts par les nouvelles approches assurent le. developpement d’une strategie de test en pre-certification efficace. En effet, la premiere. approche d’injection de pannes considerant la difference de sensibilite relative des elements. de memoire selon leur contenu genere des resultats donnant une erreur relative atteignant. 3.1 % quand compares aux resultats obtenus a TRIUMF alors que l’erreur relative donnee. par la comparaison des resultats d’une injection conventionnelle aleatoire de pannes avec. ceux de TRIUMF peut atteindre la valeur de 75 %. De plus, l’application de cette approche a. des circuits plus conventionnels montre que 2.3 fois plus d’erreurs sont detectees en. comparaison avec l’injection aleatoire des pannes. Ceci suggere que ne pas considerer la. difference de sensibilite relative dans la procedure d’emulation peut mener a une sousestimation. de la sensibilite du design face aux radiations. Les resultats de la deuxieme. approche proposee ont ete aussi compares aux resultats d’une injection aleatoire de pannes. L’approche proposee, maximisant le nombre des bits critiques inverses, permet d’atteindre. un facteur d’acceleration de 108 de la procedure d’injection des pannes en comparaison a. l’approche aleatoire. Elle permet aussi de minimiser l’erreur d’estimation du nombre des bits. critiques pour atteindre une valeur de ±1.1 % calculee pour un intervalle de confiance de. 95 % tandis que la valeur d’erreur d’estimation des bits critiques generee par l’approche. aleatoire d’injection des pannes pour le meme intervalle de confiance peut atteindre ±8.6 %. Enfin, la derniere approche proposee d’injection de pannes dans les LUT se distingue des. autres approches disponibles dans la litterature par sa simplicite tout en assurant une. couverture maximale de pannes de 100 %. En effet, l’approche proposee est independante. des outils externes permettant d’identifier les bits configurant les LUT qui sont obsoletes ou. ne supportent pas les nouvelles generations des FPGA. Elle agit directement sur les fichiers. generes par l’outil de synthese adopte.

Détection et prise en charge efficace à l’urgence d’une luxation de Lisfranc à faible vélocité

PubMed Central

Mayich, D. Joshua; Mayich, Michael S.; Daniels, Timothy R.

2012-01-01

Résumé Objectif Améliorer la capacité des médecins de soins primaires de reconnaître les mécanismes et les présentations courantes des luxations de Lisfranc à basse vélocité (LLF) et mieux faire comprendre le rôle de l’imagerie et les principes des soins primaires dans les cas de LLF à basse vélocité. Sources des données Une recension des ouvrages spécialisés dans MEDLINE a été effectuée et les résultats ont été résumés, concernant notamment l’anatomie et les mécanismes, les diagnostics cliniques et par imagerie et les principes de la prise en charge en milieu de soins primaires. Message principal Les LLF à basse vélocité sont le résultat de divers mécanismes et, à l’examen clinique et à l’imagerie, les signes révélateurs sont très peu perceptibles. Il faut donc un fort degré de suspicion et de prudence dans la prise en charge de ce type de blessure. Conclusion Si on met en pratique quelques principes thérapeutiques dans la prise en charge des LLF à basse vélocité, qui sont potentiellement dévastatrices si elles ne sont pas reconnues, et ce, dès leur présentation, il est possible d’optimiser l’issue de telles blessures.

Caracterisation des melanges developpes pour le moulage basse pression des poudres metalliques (LPIM) =

NASA Astrophysics Data System (ADS)

Fareh, Fouad

Le moulage par injection basse pression des poudres metalliques est une technique de fabrication qui permet de fabriquer des pieces possedant la complexite des pieces coulees mais avec les proprietes mecaniques des pieces corroyees. Cependant, l'optimisation des etapes de deliantage et de frittage a ete jusqu'a maintenant effectuee a l'aide de melange pour lesquels la moulabilite optimale n'a pas encore ete demontree. Ainsi, la comprehension des proprietes rheologiques et de la segregation des melanges est tres limitee et cela presente le point faible du processus de LPIM. L'objectif de ce projet de recherche etait de caracteriser l'influence des liants sur le comportement rheologique des melanges en mesurant la viscosite et la segregation des melanges faible viscosite utilises dans le procede LPIM. Afin d'atteindre cet objectif, des essais rheologiques et thermogravimetriques ont ete conduits sur 12 melanges. Ces melanges ont ete prepares a base de poudre d'Inconel 718 de forme spherique (chargement solide constant a 60%) et de cires, d'agents surfactants ou epaississants. Les essais rheologiques ont ete utilises entre autre pour calculer l'indice d'injectabilite ?STV des melanges, tandis que les essais thermogravimetriques ont permis d'evaluer precisement la segregation des poudres dans les melanges. Il a ete demontre que les trois (3) melanges contenant de la cire de paraffine et de l'acide stearique presentent des indices alpha STV plus eleves qui sont avantageux pour le moulage par injection des poudres metalliques (MIM), mais segregent beaucoup trop pour que la piece fabriquee produise de bonnes caracteristiques mecaniques. A l'oppose, le melange contenant de la cire de paraffine et de l'ethylene-vinyle acetate ainsi que le melange contenant seulement de la cire de carnauba segregent peu voire pas du tout, mais possedent de tres faibles indices alphaSTV : ils sont donc difficilement injectables. Le meilleur compromis semble donc etre les melanges contenant de la cire (de paraffine, d'abeille et de carnauba) et de faible teneur en acide stearique et en ethylene-vinyle acetate. Par ailleurs, les lois physiques preexistantes ont permis de confirmer les resultats des essais rheologiques et thermogravimetriques, mais aussi de mettre en evidence l'influence de la segregation sur les proprietes rheologiques des melanges. Ces essais ont aussi montre l'effet de constituants de liant et du temps passe a l'etat fondu sur l'intensite de la segregation dans les melanges. Les melanges contenants de l'acide stearique segregent rapidement. La caracterisation des melanges developpes pour le moulage basse pression des poudres metalliques doit etre obtenue a l'aide d'une methode de courte duree pour eviter la segregation et de mesurer precisement l'aptitude a l'ecoulement de ces melanges.

Technology Insertion and Management: Options for the Canadian Forces

DTIC Science & Technology

2010-01-01

Minister of National Defence, 2010 © Sa Majesté la Reine ( en droit du Canada), telle que représentée par le ministre de la Défense nationale, 2010...semble indiquer qu’un changement de paradigme est en cours dans la façon dont les militaires élaborent et emploient la technologie à utiliser avec leurs...coûts-avantages fondée sur l’optimisation des options en matière d’insertion technologique. ii DRDC CORA TM 2010-015 This page

L’évaluation du risque cardiaque avant l’utilisation de stimulants chez les enfants et les adolescents

PubMed Central

Bélanger, SA; Warren, AE; Hamilton, RM; Gray, C; Gow, RM; Sanatani, S; Côté, J-M; Lougheed, J; LeBlanc, J; Martin, S; Miles, B; Mitchell, C; Gorman, DA; Weiss, M; Schachar, R

2009-01-01

Les décisions en matière de réglementation et les documents scientifiques au sujet de la prise en charge du trouble de déficit de l’attention avec hyperactivité (TDAH) soulèvent des questions quant à l’innocuité des médicaments et à l’évaluation convenable à effectuer avant le traitement afin de déterminer la pertinence d’une pharmacothérapie. Ce constat est particulièrement vrai en présence de cardiopathies structurelles ou fonctionnelles. Le présent article contient l’analyse des données disponibles, y compris les publications révisées par des pairs, des données tirées du site Web de la Food and Drug Administration des États-Unis au sujet des réactions indésirables déclarées chez des enfants qui prennent des stimulants, ainsi que des données de Santé Canada sur le même problème. Des lignes directrices consensuelles sur l’évaluation pertinente sont proposées d’après l’apport des membres de la Société canadienne de pédiatrie, de la Société canadienne de cardiologie et de l’Académie canadienne de psychiatrie de l’enfant et de l’adolescent, qui possèdent notamment des compétences et des connaissances précises tant dans le secteur du TDAH que de la cardiologie pédiatrique. Le présent document de principes prône une anamnèse et un examen physique détaillés avant la prescription de stimulants et s’attarde sur le dépistage des facteurs de risque de mort subite, mais il ne contient pas de recommandations systématiques de dépistage électrocardiographique ou de consultations avec un spécialiste en cardiologie, à moins que les antécédents ou que l’examen physique ne le justifient. Le document contient un questionnaire pour repérer les enfants potentiellement vulnérables à une mort subite (quel que soit le type de TDAH ou les médicaments utilisés pour le traiter). Même si les recommandations dépendent des meilleures données probantes disponibles, le comité s’entend pour affirmer que d’autres recherches s’imposent pour optimiser l’approche de ce scénario clinique courant.

Non-linearite et couplages lumiere-matiere en electrodynamique quantique en circuit

NASA Astrophysics Data System (ADS)

Bourassa, Jerome

L'électrodynamique quantique en circuit est un contexte unique pour l'optique quantique et le calcul quantique. Dans cette architecture où des qubits supraconducteurs, composés de jonctions Josephson, sont fortement couplés au champ électromagnétique de résonateurs coplanaires, la dynamique du système est semblable à celle des atomes dans des cavités optiques. La polyvalence de la conception des circuits supraconducteurs permet d'étudier l'interaction lumière-matière de différents régimes et manières. Ainsi, plusieurs qubits peuvent être couplés à un seul résonateur afin de les enchevêtrer. Une jonction Josephson peut également être intégrée directement au résonateur afin de produire une interaction non linéaire entre les photons. De la même manière, il a été suggéré que le couplage qubitrésonateur pourrait devenir l'échelle d'énergie dominante du système : le régime de couplage ultrafort. Malgré que la dynamique qubit-résonateur soit bien comprise, les modèles actuels ne permettent pas de prédire correctement les effets dispersifs du résonateur sur les qubits tels : le décalage de Lamb, l'interaction d'échange virtuelle et le temps de relaxation. Comme il n'y a pas non plus de modèle général permettant de déterminer les caractéristiques d'un résonateur non linéaire, on comprend mal comment rendre la non-linéarité plus forte, ni même si le régime de couplage ultrafort peut être physiquement réalisé dans ces circuits. Dans le cadre de ma thèse, je me suis intéressé à la modélisation de qubits et de résonateurs afin de mieux comprendre l'interaction lumière-matière en circuits, dans le but de développer des conceptions alternatives d'architectures plus performantes ou qui explorent des régimes d'interactions méconnus. Pour ce faire, j'ai développé une méthode analytique générale permettant de trouver l'hamiltonien exact de circuits distribués non linéaires, une méthode basée sur la mécanique lagrangienne et la représentation des modes propres d'oscillation. La grande qualité de la méthode réside dans la description analytique détaillée des paramètres de l'hamiltonien du système en fonction de la géométrie et des caractéristiques électromagnétiques du circuit. Non seulement le formalisme développé réconcilie le modèle quantique avec l'électromagnétisme classique et la théorie des circuits, mais va bien au-delà en formulant d'importantes prédictions sur la nature des interactions et l'influence des fluctuations du vide du résonateur sur la dynamique des qubits supraconducteurs. À l'aide d'exemples numériques réalistes et compatibles avec les technologies actuelles, je montre comment de simples optimisations de conception permettraient d'augmenter grandement l'efficacité et la rapidité d'exécution de calculs quantiques avec l'architecture, en plus d'atteindre des régimes de non-linéarité et de couplage lumière-matière inédits. En permettant de mieux comprendre l'interaction lumière-matière dans les circuits et d'optimiser l'architecture afin d'atteindre de nouveaux régimes de couplages, la méthode d'analyse de circuit développée dans cette thèse permettra de tester et raffiner nos connaissances sur l'électrodynamique quantique et la physique quantique. Mots-clés: Information quantique, électrodynamique quantique, supraconductivité, électromagnétisme, qubit supraconducteur, résonateur non linéaire, couplage ultrafort, effet Kerr.

Patient-tailored Drug-eluting Stent Choice - A Solution for Patients with Diabetes: Proceedings of Two Satellite Symposia Held at EuroPCR in May 2015 in Paris.

PubMed

Mountfort, Katrina; Mehran, Roxana; Colombo, Antonio; Stella, Pieter; Romaguera, Rafael; Sardella, Gennaro

2015-09-01

Although second-generation drug-eluting stents (DES) have improved outcomes in percutaneous coronary interventions (PCIs), important unmet needs remain. Two symposia at EuroPCR 2015 focused on two challenging scenarios. First, patients with diabetes mellitus (DM) have generally inferior outcomes following PCI. The Cre8™ stent (manufactured by CID Spa, member of Alvimedica Group) has shown unique efficacy in subpopulations of patients with DM during clinical trials. A live case in a patient with diabetes illustrated the challenges of complex multivessel disease. Second, optimising stent selection towards devices that have demonstrated complete and early endothelialisation offers the potential to reduce the duration of dual antiplatelet therapy. The Cre8™ DES features a polymer-free platform and has been associated with low rates of in-stent thrombosis.

Boundary element based multiresolution shape optimisation in electrostatics

NASA Astrophysics Data System (ADS)

Bandara, Kosala; Cirak, Fehmi; Of, Günther; Steinbach, Olaf; Zapletal, Jan

2015-09-01

We consider the shape optimisation of high-voltage devices subject to electrostatic field equations by combining fast boundary elements with multiresolution subdivision surfaces. The geometry of the domain is described with subdivision surfaces and different resolutions of the same geometry are used for optimisation and analysis. The primal and adjoint problems are discretised with the boundary element method using a sufficiently fine control mesh. For shape optimisation the geometry is updated starting from the coarsest control mesh with increasingly finer control meshes. The multiresolution approach effectively prevents the appearance of non-physical geometry oscillations in the optimised shapes. Moreover, there is no need for mesh regeneration or smoothing during the optimisation due to the absence of a volume mesh. We present several numerical experiments and one industrial application to demonstrate the robustness and versatility of the developed approach.

Identification de lois constitutives et de lois de frottement adaptées aux grandes vitesses de sollicitation

NASA Astrophysics Data System (ADS)

Dalverny, O.; Capéraa, S.; Pantalé, O.; Sattouf, C.

2002-12-01

Cet article présente une méthodologie d'identification de lois constitutives et de lois de contact adaptées aux matériaux métalliques sous chargement dynamique à grande vitesse de déformation. Les essais sont effectués à partir de montages expérimentaux adaptés à un lanceur à gaz permettant d'obtenir une vitesse de projectile de l'ordre de 350m/s pour une masse totale de 30gr. Le premier essai consiste en un impact de Taylor correspondant à un chargement mécanique de type compression. Le second essai de type “extrusion conique" permet la détermination des lois de frottement à grande vitesse. La procédure générale d'identification des lois de comportement à partir d'essais dynamiques se fait au moyen d'une analyse post-mortem des échantillons et de la corrélation entre ces résultats expérimentaux et un modèle numérique des essais. Pour les deux cas précédemment cités, nous présentons la configuration optimale d'essai ainsi que les résultats obtenus à partir d'un algorithme d'optimisation de type Levenberg-Marquard.

Evaluation des prescriptions antibiotiques au service des urgences de l’Hôpital Militaire d’Instruction Mohammed V (HMIMV)

PubMed Central

Elbouti, Anass; Rafai, Mostafa; Chouaib, Naoufal; Jidane, Said; Belkouch, Ahmed; Bakkali, Hicham; Belyamani, Lahcen

2016-01-01

Cette étude à pour objectifs de décrire les pratiques des prescriptions, évaluer leur pertinence et leur conformité aux règles d’utilisations et étudier les facteurs susceptibles de les influencer. Il s’agit d’une étude transversale d’évaluation des prescriptions antibiotiques portant sur 105 patients réalisée au service des urgences médico-chirurgicales de l’H.M.I.Med V de Rabat sur une période d’un mois. Le recueil des données était fait à l’aide d’un questionnaire rapportant les données démographiques et anamnestiques, les antécédents, la notion d’allergie, les données spécifiques de l’examen clinique, les données para cliniques, la prescription détaillée de l’antibiotique. Les données récoltées ont été ensuite évaluées par un médecin référent, chargé d’indiquer les éventuelles erreurs de traitement. Parmi les infections ayant motivé la prescription des antibiotiques, les affections des systèmes respiratoires et urinaires étaient au premier rang, les familles d’antibiotiques les plus couramment employées sont les pénicillines, les quinolones et les céphalosporines. 74 prescriptions soit (70,5%) étaient à la fois pertinentes et conformes contre 9 prescriptions soit (8,6%) justifiées mais non pertinentes et 6 prescriptions soit (5,7%) étaient jugées injustifiées par le médecin référent par absence d’infection. Les évaluations des pratiques médicales sont rarement menées dans les établissements de santé; c’est dans ce cadre que nous avons voulu nous inscrire en produisant cette étude afin d’améliorer la pertinence de nos prescriptions antibiotiques et d’optimiser leur conformité aux différentes recommandations. PMID:28292124

Elaboration de nouvelles approches micromecaniques pour l'optimisation des performances mecaniques des materiaux heterogenes

NASA Astrophysics Data System (ADS)

Aboutajeddine, Ahmed

Les modeles micromecaniques de transition d'echelles qui permettent de determiner les proprietes effectives des materiaux heterogenes a partir de la microstructure sont consideres dans ce travail. L'objectif est la prise en compte de la presence d'une interphase entre la matrice et le renforcement dans les modeles micromecaniques classiques, de meme que la reconsideration des approximations de base de ces modeles, afin de traiter les materiaux multiphasiques. Un nouveau modele micromecanique est alors propose pour tenir compte de la presence d'une interphase elastique mince lors de la determination des proprietes effectives. Ce modele a ete construit grace a l'apport de l'equation integrale, des operateurs interfaciaux de Hill et de la methode de Mori-Tanaka. Les expressions obtenues pour les modules globaux et les champs dans l'enrobage sont de nature analytique. L'approximation de base de ce modele est amelioree par la suite dans un nouveau modele qui s'interesse aux inclusions enrobees avec un enrobage mince ou epais. La resolution utilisee s'appuie sur une double homogeneisation realisee au niveau de l'inclusion enrobee et du materiau. Cette nouvelle demarche, permettra d'apprehender completement les implications des approximations de la modelisation. Les resultats obtenus sont exploites par la suite dans la solution de l'assemblage de Hashin. Ainsi, plusieurs modeles micromecaniques classiques d'origines differentes se voient unifier et rattacher, dans ce travail, a la representation geometrique de Hashin. En plus de pouvoir apprecier completement la pertinence de l'approximation de chaque modele dans cette vision unique, l'extension correcte de ces modeles aux materiaux multiphasiques est rendue possible. Plusieurs modeles analytiques et explicites sont alors proposee suivant des solutions de differents ordres de l'assemblage de Hashin. L'un des modeles explicite apparait comme une correction directe du modele de Mori-Tanaka, dans les cas ou celui ci echoue a donner de bons resultats. Finalement, ce modele de Mori-Tanaka corrige est utilise avec les operateurs de Hill pour construire un modele de transition d'echelle pour les materiaux ayant une interphase elastoplastique. La loi de comportement effective trouvee est de nature incrementale et elle est conjuguee a la relation de la plasticite de l'interphase. Des simulations d'essais mecaniques pour plusieurs proprietes de l'interphase plastique a permis de dresser des profils de l'enrobage octroyant un meilleur comportement au materiau.

Optimisation of active suspension control inputs for improved vehicle handling performance

NASA Astrophysics Data System (ADS)

Čorić, Mirko; Deur, Joško; Kasać, Josip; Tseng, H. Eric; Hrovat, Davor

2016-11-01

Active suspension is commonly considered under the framework of vertical vehicle dynamics control aimed at improvements in ride comfort. This paper uses a collocation-type control variable optimisation tool to investigate to which extent the fully active suspension (FAS) application can be broaden to the task of vehicle handling/cornering control. The optimisation approach is firstly applied to solely FAS actuator configurations and three types of double lane-change manoeuvres. The obtained optimisation results are used to gain insights into different control mechanisms that are used by FAS to improve the handling performance in terms of path following error reduction. For the same manoeuvres the FAS performance is compared with the performance of different active steering and active differential actuators. The optimisation study is finally extended to combined FAS and active front- and/or rear-steering configurations to investigate if they can use their complementary control authorities (over the vertical and lateral vehicle dynamics, respectively) to further improve the handling performance.

Algorithmes et architectures pour ordinateurs quantiques supraconducteurs

NASA Astrophysics Data System (ADS)

Blais, Alexandre

Depuis sa formulation, la theorie de l'information a ete basee, implicitement, sur les lois de la physique classique. Une telle formulation est toutefois incomplete puisqu'elle ne tient pas compte de la realite quantique. Au cours des vingt dernieres annees, l'expansion de la theorie de l'information englobant les effets purement quantiques a connu un interet grandissant. La realisation d'un systeme de traitement de l'information quantique, un ordinateur quantique, presente toutefois de nombreux defis. Dans ce document, on s'interesse a differents aspects concernant ces defis. On commence par presenter des concepts algorithmiques comme l'optimisation de calculs quantiques et le calcul quantique geometrique. Par la suite, on s'interesse au design et a differents aspects de l'utilisation de qubits bases sur les jonctions Josephson. En particulier, un nouveau design de qubit supraconducteur est suggere. On presente aussi une approche originale pour l'interaction entre qubits. Cette approche est tres generale puisqu'elle peut etre appliquee a differents designs de qubits. Finalement, on s'interesse a la lecture des qubits supraconducteurs de flux. Le detecteur suggere ici a l'avantage de pouvoir etre decouple du qubit lorsqu'il n'y a pas de mesure en cours.

Les psychoses de l’épileptique: approche clinique à propos d'un cas

PubMed Central

Charfi, Nada; Trigui, Dorsaf; Ben Thabet, Jihène; Zouari, Nasreddine; Zouari, Lobna; Maalej, Mohamed

2014-01-01

Pour discuter les liens entre épilepsie et psychose, les auteurs rapportent l'observation d'une fille âgée de 22 ans, traitée pour épilepsie fronto-temporale, adressée en psychiatrie pour des hallucinations sensorielles et cénesthésiques et un délire mystique et d'influence, apparus secondairement et non améliorés par le traitement antiépileptique. Les symptômes psychotiques, chez l’épileptique, peuvent entrer dans le cadre de psychoses intercritiques, post-critiques ou alternatives. Pour le cas rapporté, les symptômes psychotiques étaient intercritiques et chroniques. Il s'agissait vraisemblablement d'une psychose schizophréniforme. Dans ce type de psychose, une indifférence affective et une restriction des activités sont rarement rencontrés, alors que les fluctuations rapides de l'humeur sont fréquentes. Les thématiques délirantes sont assez souvent mystiques, alimentées par des hallucinations auditives et par des hallucinations visuelles inhabituelles. Les troubles négatifs sont rares. Les psychoses épileptiques n'ont pas été identifiées comme des entités nosographiques dans les systèmes de classification psychiatrique (DSM-IV et CIM-10), ce qui pose un problème de reconnaissance de ces troubles. Une collaboration entre psychiatre et neurologue devient ainsi nécessaire pour mieux comprendre cette comorbidité complexe, éviter les erreurs diagnostiques et optimiser la prise en charge. PMID:25309665

Etude des phenomenes dynamiques ultrarapides et des caracteristiques impulsionnelles d'emission terahertz du supraconducteur YBCO

NASA Astrophysics Data System (ADS)

Savard, Stephane

Les premieres etudes d'antennes a base de supraconducteurs a haute temperature critique emettant une impulsion electromagnetique dont le contenu en frequence se situe dans le domaine terahertz remontent a 1996. Une antenne supraconductrice est formee d'un micro-pont d'une couche mince supraconductrice sur lequel un courant continu est applique. Un faisceau laser dans le visible est focalise sur le micro-pont et place le supraconducteur dans un etat hors-equilibre ou des paires sont brisees. Grace a la relaxation des quasiparticules en surplus et eventuellement de la reformation des paires supraconductrices, nous pouvons etudier la nature de la supraconductivite. L'analyse de la cinetique temporelle du champ electromagnetique emis par une telle antenne terahertz supraconductrice s'est averee utile pour decrire qualitativement les caracteristiques de celle-ci en fonction des parametres d'operation tels que le courant applique, la temperature et la puissance d'excitation. La comprehension de l'etat hors-equilibre est la cle pour comprendre le fonctionnement des antennes terahertz supraconductrices a haute temperature critique. Dans le but de comprendre ultimement cet etat hors-equilibre, nous avions besoin d'une methode et d'un modele pour extraire de facon plus systematique les proprietes intrinseques du materiau qui compose l'antenne terahertz a partir des caracteristiques d'emission de celle-ci. Nous avons developpe une procedure pour calibrer le spectrometre dans le domaine temporel en utilisant des antennes terahertz de GaAs bombarde aux protons H+ comme emetteur et detecteur. Une fois le montage calibre, nous y avons insere une antenne emettrice dipolaire de YBa 2Cu3O7-delta . Un modele avec des fonctions exponentielles de montee et de descente du signal est utilise pour lisser le spectre du champ electromagnetique de l'antenne de YBa 2Cu3O7-delta, ce qui nous permet d'extraire les proprietes intrinseques de ce dernier. Pour confirmer la validite du modele choisi, nous avons mesure les proprietes intrinseques du meme echantillon de YBa2Cu3O7- delta avec la technique pompe-visible et sonde-terahertz donnant, elle aussi, acces aux temps caracteristiques regissant l'evolution hors-equilibre de ce materiau. Dans le meilleur scenario, ces temps caracteristiques devraient correspondre a ceux evalues grace a la modelisation des antennes. Un bon controle des parametres de croissance des couches minces supraconductrices et de fabrication du dispositif nous a permis de realiser des antennes d'emission terahertz possedant d'excellentes caracteristiques en terme de largeur de bande d'emission (typiquement 3 THz) exploitables pour des applications de spectroscopie resolue dans le domaine temporel. Le modele developpe et retenu pour le lissage du spectre terahertz decrit bien les caracteristiques de l'antenne supraconductrice pour tous les parametres d'operation. Toutefois, le lien avec la technique pompe-sonde lors de la comparaison des proprietes intrinseques n'est pas direct malgre que les deux techniques montrent que le temps de relaxation des porteurs augmente pres de la temperature critique. Les donnees en pompe-sonde indiquent que la mesure du temps de relaxation depend de la frequence de la sonde, ce qui complique la correspondance des proprietes intrinseques entre les deux techniques. De meme, le temps de relaxation extrait a partir du spectre de l'antenne terahertz augmente en s'approchant de la temperature critique (T c) de YBa2Cu 3O7-delta. Le comportement en temperature du temps de relaxation correspond a une loi de puissance qui est fonction de l'inverse du gap supraconducteur avec un exposant 5 soit 1/Delta 5(T). Le travail presente dans cette these permet de mieux decrire les caracteristiques des antennes supraconductrices a haute temperature critique et de les relier aux proprietes intrinseques du materiau qui les compose. De plus, cette these presente les parametres a ajuster comme le courant applique, la puissance de la pompe, la temperature d'operation, etc, afin d'optimiser l'emission et les performances de ces antennes supraconductrices entre autres pour maximiser leur etendue en frequence dans une perspective d'application en spectroscopie terahertz. Cependant, plusieurs des resultats obtenus soulevent la difficulte de decrire l'etat hors-equilibre et la necessite de developper une theorie pour le supraconducteur YBa2 Cu3O7-delta

Elaboration de revetements nanocomposites avec des proprietes superhydrophobes, semi-conductrices et photocatalytiques

NASA Astrophysics Data System (ADS)

Madidi, Fatima Zahra

Les lignes aeriennes de transport et de distribution de l'energie electrique sont souvent exposees a diverses contraintes. Parmi celles-ci, la pollution des isolateurs constitue l'un des facteurs de premiere importance dans la fiabilite du transport d'energie. En effet, la presence de pollution sur les isolateurs lorsqu'elle est humidifiee entraine la diminution de leur performance electrique en favorisant l'apparition d'arcs de contournement. De telles pannes peuvent parfois causer des impacts socioeconomiques importants. Par ailleurs, le developpement de nouveaux revetements pour ces isolateurs peut s'averer un moyen efficace pour les proteger contre l'apparition de l'arc de contournement. Les revetements superhydrophobes ont fait l'objet de nombreuses etudes au cours de ces dernieres annees. Ces surfaces sont preparees en combinant une rugosite nano-microstructuree avec une faible energie de surface. En outre, de telles surfaces ont de nombreuses applications si elles sont durables et n'ont pas d'effets nocifs sur l'environnement. L'objectif principal de la presente etude vise d'abord l'elaboration de revetements superhydrophobes, puis l'etude de leur duree de vie, leurs proprietes dielectriques et photocatalytiques. Une grande variete de materiaux a faible energie de surface peuvent etre utilises pour le developpement de ces revetements. Dans cette recherche, le caoutchouc de silicone (CS) est employe car il presente de nombreuses proprietes, notamment une forte hydrophobie, une resistance aux rayonnements ultraviolets, et une bonne tenue au feu sans degagement de produits toxiques. Toutefois, le point faible de ces materiaux est la degradation de leurs proprietes hydrophobes. Afin d'ameliorer certaines proprietes du caoutchouc de silicone, des nanoparticules seront additionnees au polymere de base. La technique d'elaboration des revetements consiste a ajouter des nanoparticules de dioxyde de titane (TiO2) au polymere de base, par des methodes ayant un potentiel d'applications industrielles. Les parametres d'elaboration ont ete optimises afin d'obtenir des revetements stables presentant des angles de contact eleves avec des gouttelettes d'eau et de faibles hysteresis. Apres avoir obtenu des surfaces superhydrophobes, des tests de stabilite ont ete effectues dans des conditions de vieillissement accelere tels que l'immersion dans des solutions aqueuses avec differents pH et conductivites ou la degradation par rayonnement UV. Les resultats obtenus ont montre que l'ajout de nanoparticules de dioxyde de titane au caoutchouc de silicone permet d'ameliorer l'hydrophobie et la stabilite de ce polymere. Les revetements superhydrophobes obtenus ont pu maintenir leur superhydrophobicite apres plusieurs jours d'immersion dans differentes solutions aqueuses. Ils presentent aussi une bonne stabilite lorsqu'ils sont exposes aux rayons UV ainsi qu'une stabilite mecanique. De plus, on a pu developper des revetements nanocomposites et microcomposites avec de bonnes proprietes dielectriques. L'etude des proprietes photocatalytiques des revetements superhydrophobes ont montre que l'adsorption des molecules reactives (polluants) sur la surface du catalyseur (TiO2) est le parametre cle de l'activite photocatalytique. L'augmentation de la concentration de TiO2 conduit a une diminution de la concentration du polluant et par consequent a un excellent rendement photocatalytique.

Détermination de la vitesse de coupe en usinage à l'aide des réseaux de neurones

NASA Astrophysics Data System (ADS)

Amor, Noureddine; Noureddine, Ali; Kherfane, Riad Lakhdar

2018-02-01

En usinage par enlèvement de copeaux, il est nécessaire de connaître des éléments tels que la géométrie à obtenir, la matière à usiner, le type d'opération, la machine-outil, l'outil de coupe, la profondeur de passe, l'avance, la vitesse de coupe. Ces trois derniers éléments quantifiables sont déterminés à l'aide de tables, abaques, logiciel informatique dédié, ou système CFAO, offrant une large gamme de choix mais manquant de transparence et de flexibilité. La contribution de cet article est d'appliquer les techniques d'intelligence artificielle basées sur les réseaux de neurones artificiels (RNA) au développement d'un système de décision pour le choix des paramètres de coupe. Pour modéliser la vitesse de coupe, nous utilisons un RNA avec un algorithme de rétro-propagation. Des valeurs expérimentales provenant d'un abaque source serviront à construire et établir le RNA pour estimer la valeur de la vitesse de coupe, utilisant comme données un certain nombre de paramètres d'influence. La validité des résultats obtenus montre que cette méthode peut être appliquée avec succès et que son utilisation dans le domaine de l'usinage peut contribuer à optimiser les conditions de coupe par un choix plus précis et plus rapide de la vitesse de coupe.

Technique distribuee de gestion de la charge sur le reseau electrique et ring-tree: Un nouveau systeme de communication P2P

NASA Astrophysics Data System (ADS)

Ayoub, Simon

Le reseau de distribution et de transport de l'electricite se modernise dans plusieurs pays dont le Canada. La nouvelle generation de ce reseau que l'on appelle smart grid, permet entre autre l'automatisation de la production, de la distribution et de la gestion de la charge chez les clients. D'un autre cote, des appareils domestiques intelligents munis d'une interface de communication pour des applications du smart grid commencent a apparaitre sur le marche. Ces appareils intelligents pourraient creer une communaute virtuelle pour optimiser leurs consommations d'une facon distribuee. La gestion distribuee de ces charges intelligentes necessite la communication entre un grand nombre d'equipements electriques. Ceci represente un defi important a relever surtout si on ne veut pas augmenter le cout de l'infrastructure et de la maintenance. Lors de cette these deux systemes distincts ont ete concus : un systeme de communication peer-to-peer, appele Ring-Tree, permettant la communication entre un nombre important de noeuds (jusqu'a de l'ordre de grandeur du million) tel que des appareils electriques communicants et une technique distribuee de gestion de la charge sur le reseau electrique. Le systeme de communication Ring-Tree inclut une nouvelle topologie reseau qui n'a jamais ete definie ou exploitee auparavant. Il inclut egalement des algorithmes pour la creation, l'exploitation et la maintenance de ce reseau. Il est suffisamment simple pour etre mis en oeuvre sur des controleurs associes aux dispositifs tels que des chauffe-eaux, chauffage a accumulation, bornes de recharges electriques, etc. Il n'utilise pas un serveur centralise (ou tres peu, seulement lorsqu'un noeud veut rejoindre le reseau). Il offre une solution distribuee qui peut etre mise en oeuvre sans deploiement d'une infrastructure autre que les controleurs sur les dispositifs vises. Finalement, un temps de reponse de quelques secondes pour atteindre 1'ensemble du reseau peut etre obtenu, ce qui est suffisant pour les besoins des applications visees. Les protocoles de communication s'appuient sur un protocole de transport qui peut etre un de ceux utilises sur l'Internet comme TCP ou UDP. Pour valider le fonctionnement de de la technique de controle distribuee et le systeme de communiction Ring-Tree, un simulateur a ete developpe; un modele de chauffe-eau, comme exemple de charge, a ete integre au simulateur. La simulation d'une communaute de chauffe-eaux intelligents a montre que la technique de gestion de la charge combinee avec du stockage d'energie sous forme thermique permet d'obtenir, sans affecter le confort de l'utilisateur, des profils de consommation varies dont un profil de consommation uniforme qui represente un facteur de charge de 100%. Mots-cles : Algorithme Distribue, Demand Response, Gestion de la Charge Electrique, M2M (Machine-to-Machine), P2P (Peer-to-Peer), Reseau Electrique Intelligent, Ring-Tree, Smart Grid

Endommagement d'un composite polypropylène renforcé par des fibres de verre courtes : approche expérimentale

NASA Astrophysics Data System (ADS)

Laksimi, Abdelouahed; Bounouas, Lahsen; Benmedakhene, Salim; Azari, Zitoun; Imad, Abdellatif

To obtain good mechanical performance of the composite material, it is important to optimise the fibres ratio as well as the fibre/matrix interface quality which have influence on the damage. The main objective of this study is to determine the structural parameters influence on damage evolution concerning two types of polypropylene glass fibres composites. With a classical approach of damage mechanical theory which consists of load-unload tensile tests, acoustic emission permits to detect and follow damage mechanisms during loading. Fractographic analysis highlights the different assumptions and conclusions for this study.

A generic methodology for the optimisation of sewer systems using stochastic programming and self-optimizing control.

PubMed

Mauricio-Iglesias, Miguel; Montero-Castro, Ignacio; Mollerup, Ane L; Sin, Gürkan

2015-05-15

The design of sewer system control is a complex task given the large size of the sewer networks, the transient dynamics of the water flow and the stochastic nature of rainfall. This contribution presents a generic methodology for the design of a self-optimising controller in sewer systems. Such controller is aimed at keeping the system close to the optimal performance, thanks to an optimal selection of controlled variables. The definition of an optimal performance was carried out by a two-stage optimisation (stochastic and deterministic) to take into account both the overflow during the current rain event as well as the expected overflow given the probability of a future rain event. The methodology is successfully applied to design an optimising control strategy for a subcatchment area in Copenhagen. The results are promising and expected to contribute to the advance of the operation and control problem of sewer systems. Copyright © 2015 Elsevier Ltd. All rights reserved.

Developpement et validation d'un outil base sur l'acoustique geometrique pour le diagnostic du bruit de nacelle

NASA Astrophysics Data System (ADS)

Minard, Benoit

De nos jours, la problématique du bruit généré par les avions est devenue un point de développement important dans le domaine de l'aéronautique. C'est ainsi que de nombreuses études sont faites dans le domaine et une première approche consiste à modéliser de façon numérique ce bruit de manière à réduire de façon conséquente les coûts lors de la conception. C'est dans ce contexte qu'un motoriste a demandé à l'université de Sherbrooke, et plus particulièrement au groupe d'acoustique de l'Université de Sherbrooke (GAUS), de développer un outil de calcul de la propagation des ondes acoustiques dans les nacelles mais aussi pour l'étude des effets d'installation. Cet outil de prédiction leur permet de réaliser des études afin d'optimiser les traitements acoustiques (« liners »), la géométrie de ces nacelles pour des études portant sur l'intérieur de la nacelle et des études de positionnement des moteurs et de design pour les effets d'installation. L'objectif de ce projet de maîtrise était donc de poursuivre le travail réalisé par [gousset, 2011] sur l'utilisation d'une méthode de lancer de rayons pour l'étude des effets d'installation des moteurs d'avion. L'amélioration du code, sa rapidité, sa fiabilité et sa généralité étaient les objectifs principaux. Le code peut être utilisé avec des traitements acoustiques de surfaces («liners») et peut prendre en compte le phénomène de la diffraction par les arêtes et enfin peut être utilisé pour réaliser des études dans des environnements complexes tels que les nacelles d'avion. Le code développé fonctionne en 3D et procéde en 3 étapes : (1) Calcul des faisceaux initiaux (division d'une sphère, demi-sphère, maillage des surfaces de la géométrie) (2) Propagation des faisceaux dans l'environnement d'étude : calcul de toutes les caractéristiques des rayons convergents (amplitude, phase, nombre de réflexions, ...) (3) Reconstruction du champ de pression en un ou plusieurs points de l'espace à partir de rayons convergents (sommation des contributions de chaque rayon) : sommation cohérente. Le code (GA3DP) permet de prendre en compte les traitements de surface des parois, la directivité de la source, l'atténuation atmosphérique et la diffraction d'ordre 1. Le code a été validé en utilisant différentes méthodes telles que la méthode des sources-images, la méthode d'analyse modale ou encore la méthode des éléments finis de frontière. Un module Matlab a été créé spécialement pour l'étude des effets d'installation et intégré au code existant chez Pratt & Whitney Canada. Mots-clés : Acoustique géométrique - Ray-Tracing - Lancer de faisceaux - Diffraction - Sommation Cohérente - Niveau de Pression.

Etude energetique et modelisation d'un Systeme Hybride Eolien-Diesel avec stockage d'Air Comprime (SHEDAC)

NASA Astrophysics Data System (ADS)

Martinez, Nicolas

Actuellement le Canada et plus specialement le Quebec, comptent une multitude de sites isoles dont !'electrification est assuree essentiellement par des generatrices diesel a cause, principalement, de l'eloignement du reseau central de disuibution electrique. Bien que consideree comme une source fiable et continue, 1 'utilisation des generatrices diesel devient de plus en plus problematique d'un point de vue energetique, economique et environnemental. Dans le but d'y resoudre et de proposer une methode d'approvisionnement plus performante, mains onereuse et plus respectueuse de l'environnement, l'usage des energies renouvelables est devenu indispensable. Differents travaux ont alors demontre que le couplage de ces energies avec des generauices diesel, formant des systemes hybrides, semble etre une des meilleures solutions. Parmi elles, le systeme hybride eolien-diesel avec stockage par air comprime (SHEDAC) se presente comme une configuration optimale pour 1 'electrification des sites isoles. En effet, differentes etudes ont permis de mettre en avant l'efficacite du stockage par air comprime, par rapport a d'autres technologies de stockage, en complement d'un systeme hybride eolien-diesel. Plus precisement, ce systeme se compose de sous-systemes qui sont: des eoliennes, des generatrices diesel et une chaine de compression et de stockage d'air comprime qui est ensuite utilisee pour suralimenter les generatrices. Ce processus permet ainsi de reduire Ia consommation en carburant tout en agrandissant la part d'energie renouvelable dans Ia production electrique. A ce jour, divers travaux de recherche ont pennis de demontrer I' efficacite d 'un tel systeme et de presenter une variete de configurations possibles. A travers ce memoire, un logiciel de dimensionnement energetique y est elabore dans le but d'unifom1iser !'approche energetique de cette technologie. Cet outil se veut etre une innovation dans le domaine puisqu'il est actuellement impossible de dimensionner un SHEDAC avec les outils existants. Un etat de l'art specifique associe a une validation des resultats a ete realise dans le but de proposer un logiciel fiable et performant. Dans une logique visant !'implantation d'un SHEDAC sur un site isole du Nord-du-Quebec, le logiciel developpe a ete, ensuite, utilise pour realiser une etude energetique permettant d' en degager la solution optimale a mettre en place. Enfin, a l' aide des outils et des resultats obtenus precedemment, !'elaboration de nouvelles strategies d'operation est presentee dans le but de demontrer comment le systeme pourrait etre optimise afm de repondre a differentes contraintes techniques. Le contenu de ce memoire est presente sous forme de trois articles originaux, soumis a des joumaux scientifiques avec cornite de lecture, et d'un chapitre specifique presentant les nouvelles strategies d 'operation. Ils relatent des travaux decrits dans le paragraphe precedent et permettent d'en deduire un usage concluant et pertinent du SHEDAC dans un site isole nordique.

Warpage optimisation on the moulded part with straight-drilled and conformal cooling channels using response surface methodology (RSM) and glowworm swarm optimisation (GSO)

NASA Astrophysics Data System (ADS)

Hazwan, M. H. M.; Shayfull, Z.; Sharif, S.; Nasir, S. M.; Zainal, N.

2017-09-01

In injection moulding process, quality and productivity are notably important and must be controlled for each product type produced. Quality is measured as the extent of warpage of moulded parts while productivity is measured as a duration of moulding cycle time. To control the quality, many researchers have introduced various of optimisation approaches which have been proven enhanced the quality of the moulded part produced. In order to improve the productivity of injection moulding process, some of researches have proposed the application of conformal cooling channels which have been proven reduced the duration of moulding cycle time. Therefore, this paper presents an application of alternative optimisation approach which is Response Surface Methodology (RSM) with Glowworm Swarm Optimisation (GSO) on the moulded part with straight-drilled and conformal cooling channels mould. This study examined the warpage condition of the moulded parts before and after optimisation work applied for both cooling channels. A front panel housing have been selected as a specimen and the performance of proposed optimisation approach have been analysed on the conventional straight-drilled cooling channels compared to the Milled Groove Square Shape (MGSS) conformal cooling channels by simulation analysis using Autodesk Moldflow Insight (AMI) 2013. Based on the results, melt temperature is the most significant factor contribute to the warpage condition and warpage have optimised by 39.1% after optimisation for straight-drilled cooling channels and cooling time is the most significant factor contribute to the warpage condition and warpage have optimised by 38.7% after optimisation for MGSS conformal cooling channels. In addition, the finding shows that the application of optimisation work on the conformal cooling channels offers the better quality and productivity of the moulded part produced.

Optimisation of active suspension control inputs for improved performance of active safety systems

NASA Astrophysics Data System (ADS)

Čorić, Mirko; Deur, Joško; Xu, Li; Tseng, H. Eric; Hrovat, Davor

2018-01-01

A collocation-type control variable optimisation method is used to investigate the extent to which the fully active suspension (FAS) can be applied to improve the vehicle electronic stability control (ESC) performance and reduce the braking distance. First, the optimisation approach is applied to the scenario of vehicle stabilisation during the sine-with-dwell manoeuvre. The results are used to provide insights into different FAS control mechanisms for vehicle performance improvements related to responsiveness and yaw rate error reduction indices. The FAS control performance is compared to performances of the standard ESC system, optimal active brake system and combined FAS and ESC configuration. Second, the optimisation approach is employed to the task of FAS-based braking distance reduction for straight-line vehicle motion. Here, the scenarios of uniform and longitudinally or laterally non-uniform tyre-road friction coefficient are considered. The influences of limited anti-lock braking system (ABS) actuator bandwidth and limit-cycle ABS behaviour are also analysed. The optimisation results indicate that the FAS can provide competitive stabilisation performance and improved agility when compared to the ESC system, and that it can reduce the braking distance by up to 5% for distinctively non-uniform friction conditions.

Mise en oeuvre et caracterisation de pieces autotrempantes elaborees avec de nouveaux alliages meres

NASA Astrophysics Data System (ADS)

Bouchemit, Arslane Abdelkader

: L'autotrempabilite des aciers en metallurgie des poudres (MP) permet d'obtenir des pieces ayant une microstructure de trempe (martensite et/ou bainite), et ce, directement lors du refroidissement a la sortie du four de frittage (frittage industriel : 10 45 °C/min [550 a 350 °C]). Cela permet entre autres d'eliminer les traitements thermiques d'austenisation et de trempe (a l'eau : ≈ 2700 °C/min ou a l'huile : ≈ 1100 °C/min [550 a 350 °C] [17]) generalement requis apres le frittage afin d'obtenir une microstructure martensitique. Ainsi, le procede de fabrication est simplifie, moins couteux et la distorsion des pieces due au refroidissement rapide lors de la trempe est evitee. De plus, l'utilisation des bains d'huile est eliminee ce qui rend le procede plus securitaire et ecologique. Les principaux parametres commandant l'autotrempabilite sont : le taux de refroidissement et la composition chimique de l'acier. De nos jours, les systemes de refroidissement a convection forcee combines aux fours industriels permettent d'obtenir des taux de refroidissement eleves a la sortie des fours (60 300 °C/min [550 a 350 °C]) [18, 19]. De plus, le taux de refroidissement critique induisant la formation de la structure de trempe est largement influence par la composition chimique de l'acier. Ainsi, plus l'acier est allie (jusqu'a une certaine limite), plus ce taux de refroidissement critique est moindre. Le molybdene, le nickel et le cuivre sont les elements usuellement utilises en MP. Cependant, le manganese et le chrome sont moins couteux et ont un impact plus marque sur l'autotrempabilite, malgre cela, ils sont rarement utilises a cause de leur susceptibilite a l'oxydation et la degradation de la compressibilite causee par le manganese. L'objectif principal de ce projet est de developper des melanges autotrempants en ajoutant des alliages meres (MA : MA1, MA2 et MA4) fortement allies au manganese (5 15 %m) et au chrome (5 15 %m) qui contiennent beaucoup de carbone (≈ 4 %m) developpes par Ian Bailon-Poujol lors de sa maitrise [20]. La haute teneur en carbone de ces alliages meres assure la protection des elements d'alliage susceptibles a l'oxydation durant toutes les etapes du procede : dans le bain liquide lors de la fusion et l'atomisation a l'eau, pendant le broyage ainsi que lors du frittage des pieces contenant ces alliages meres. Precedemment, Ian Bailon-Poujol avait etudie le broyage de certains alliages meres atomises a l'eau et avait amorce le developpement de melanges autotrempants ainsi que des etudes de diffusion des elements d'alliage. Pour ce projet, le developpement des melanges autotrempants a implique l'optimisation de toutes les etapes de la mise en oeuvre afin d'obtenir les meilleures proprietes possibles des melanges avant frittage (ecoulement, resistance a cru...) et apres frittage (durete, microstructure...), et ce, pour des alliages meres atomises a l'eau par Ian Bailon-Poujol ainsi qu'un alliage mere de chimie similaire qui fut atomise au gaz. (Abstract shortened by ProQuest.).

Déterminants de l'utilisation des méthodes contraceptives dans la zone de santé Mumbunda à Lubumbashi, République Démocratique du Congo

PubMed Central

Matungulu, Charles Matungulu; Kandolo, Simon Ilunga; Mukengeshayi, Abel Ntambue; Nkola, Angèle Musau; Mpoyi, Dorcas Ilunga; Mumba, Sylvie Katanga; Kabamba, Julie Ndayi; Cowgill, Karen; Kaj, Françoise Malonga

2015-01-01

Introduction Augmenter la prévalence contraceptive s'incarne dans les objectifs des tous les acteurs des programmes qui visent de réduire la mortalité maternelle et infantile, d'améliorer la santé reproductive des adolescents, de lutter contre le VIH/SIDA et les infections sexuellement transmissible (IST), de promouvoir le bien-être familial et de ralentir la croissance démographique. L'objectif de cette étude était de déterminer la prévalence contraceptive moderne et identifier les facteurs qui sont liés à l'utilisation des méthodes contraceptives dans la zone de santé de Mumbunda. Méthodes Une étude transversale à visé analytique a été effectuée auprès des femmes âgées de 15 à 49 ans en union maritale, de Mai à Juin 2014. Grâce à un questionnaire pré testé et validé, nous avons récolté les données par interview sur les caractéristiques sociodémographiques, obstétricales ainsi que sur la pratique contraceptive. Le logiciel SPSS version 21 nous a permis d'analyser les données. Résultats Au total 500 femmes ont été incluses dans cette étude dont l’âge moyen était de 27,9±6,1 ans. La prévalence contraceptive moderne était de 27,6%. L'attitude (ORa= 4,79; IC95%: 1,59-14,43; p<0,001), le niveau de connaissance des méthodes contraceptives (ORa=1,87; IC95%: 1,22-2,87; p<0,001), le soutien du conjoint (ORa=1,87; IC95%: 1,22-2,87; p<0,001) étaient significativement associés à l'utilisation des méthodes contraceptives modernes. Conclusion Tout effort d'augmentation de la prévalence contraceptive devrait cibler l'attitude, le niveau de connaissance de méthodes et le soutien du conjoint afin d'optimiser l'utilisation de la contraception moderne dans la zone de santé (ZS) Mumbunda. PMID:26977237

La fragilité

PubMed Central

Lee, Linda; Heckman, George; Molnar, Frank J.

2015-01-01

Résumé Objectif Aider les médecins de famille à mieux reconnaître la fragilité et ses répercussions sur la prise en charge des patients âgés. Sources des données Une recension a été effectuée dans PubMed-MEDLINE de 1990 à 2013 pour trouver des articles rédigés en anglais exclusivement, à l’aide des groupes suivants de mots clés et d’en-têtes MeSH : frail elderly, frail, frailty; aged, geriatrics, geriatric assessment, health services for the aged; primary health care, community health services et family practice. Message principal La fragilité est fréquente, en particulier chez les personnes âgées atteintes de maladies chroniques complexes comme l’insuffisance cardiaque et la bronchopneumopathie chronique obstructive. De nouvelles données probantes démontrent l’importance de la fragilité comme facteur de prédiction d’issues indésirables chez les personnes plus âgées. Quoiqu’on ne s’entende actuellement pas sur les meilleures façons d’évaluer et de diagnostiquer la fragilité en soins primaires, des marqueurs individuels de la fragilité comme la lenteur de la démarche offrent des moyens pratiques prometteurs de dépister la fragilité. La détection de la fragilité en soins primaires peut offrir la possibilité de retarder la progression de la fragilité au moyen d’interventions proactives comme l’exercice. La reconnaissance de l’existence de la fragilité peut orienter un counseling approprié et la prise de mesures préventives anticipatoires pour les patients lorsqu’on envisage des interventions médicales. Elle peut aussi aider à cerner des problèmes concomitants qui contribuent à la fragilité et l’influencent et à en optimiser la prise en charge. Les recherches futures devraient se pencher sur la détermination de moyens pratiques et efficaces pour évaluer et prendre en charge de manière appropriée ces patients vulnérables au niveau des soins primaires. Conclusion En dépit de son importance, on a accordé peu d’attention au concept de la fragilité en médecine familiale. La fragilité peut aisément passer inaperçue parce que ses manifestations sont souvent subtiles, de progression lente et, par conséquent, elle peut être méprise pour un vieillissement normal. La formation des médecins a insisté sur des maladies médicales spécifiques plutôt que sur la vulnérabilité globale. Pour les médecins en soins primaires, la reconnaissance de la fragilité peut les aider à offrir un counseling approprié aux patients et aux membres de leur famille au sujet des risques des interventions médicales.

Amélioration des performances du procédé de soudage TIG sur un acier au carbone et un alliage d'aluminium par dépôt de silice

NASA Astrophysics Data System (ADS)

Sire, Stéphane; Marya, Surendar

This Note presents ways to improve the weld penetration potential of TIG process by optimising silica application around the joints in a plain carbon steel and an aluminium alloy 5086. Whereas for plain carbon steels, full coverage of joint improves penetration, the presence of a blank zone around the joint in the flux coating on aluminium 5086 using AC-TIG seems to be the best solution for cosmetic and deep welds. To cite this article: S. Sire, S. Marya, C. R. Mecanique 330 (2002) 83-89.

Optimisation of the hybrid renewable energy system by HOMER, PSO and CPSO for the study area

NASA Astrophysics Data System (ADS)

Khare, Vikas; Nema, Savita; Baredar, Prashant

2017-04-01

This study is based on simulation and optimisation of the renewable energy system of the police control room at Sagar in central India. To analyse this hybrid system, the meteorological data of solar insolation and hourly wind speeds of Sagar in central India (longitude 78°45‧ and latitude 23°50‧) have been considered. The pattern of load consumption is studied and suitably modelled for optimisation of the hybrid energy system using HOMER software. The results are compared with those of the particle swarm optimisation and the chaotic particle swarm optimisation algorithms. The use of these two algorithms to optimise the hybrid system leads to a higher quality result with faster convergence. Based on the optimisation result, it has been found that replacing conventional energy sources by the solar-wind hybrid renewable energy system will be a feasible solution for the distribution of electric power as a stand-alone application at the police control room. This system is more environmentally friendly than the conventional diesel generator. The fuel cost reduction is approximately 70-80% more than that of the conventional diesel generator.

Approaches to optimal aquifer management and intelligent control in a multiresolutional decision support system

NASA Astrophysics Data System (ADS)

Orr, Shlomo; Meystel, Alexander M.

2005-03-01

Despite remarkable new developments in stochastic hydrology and adaptations of advanced methods from operations research, stochastic control, and artificial intelligence, solutions of complex real-world problems in hydrogeology have been quite limited. The main reason is the ultimate reliance on first-principle models that lead to complex, distributed-parameter partial differential equations (PDE) on a given scale. While the addition of uncertainty, and hence, stochasticity or randomness has increased insight and highlighted important relationships between uncertainty, reliability, risk, and their effect on the cost function, it has also (a) introduced additional complexity that results in prohibitive computer power even for just a single uncertain/random parameter; and (b) led to the recognition in our inability to assess the full uncertainty even when including all uncertain parameters. A paradigm shift is introduced: an adaptation of new methods of intelligent control that will relax the dependency on rigid, computer-intensive, stochastic PDE, and will shift the emphasis to a goal-oriented, flexible, adaptive, multiresolutional decision support system (MRDS) with strong unsupervised learning (oriented towards anticipation rather than prediction) and highly efficient optimization capability, which could provide the needed solutions of real-world aquifer management problems. The article highlights the links between past developments and future optimization/planning/control of hydrogeologic systems. Malgré de remarquables nouveaux développements en hydrologie stochastique ainsi que de remarquables adaptations de méthodes avancées pour les opérations de recherche, le contrôle stochastique, et l'intelligence artificielle, solutions pour les problèmes complexes en hydrogéologie sont restées assez limitées. La principale raison est l'ultime confiance en les modèles qui conduisent à des équations partielles complexes aux paramètres distribués (PDE) à une échelle donnée. Alors que l'accumulation d'incertitudes et, par conséquent, la stockasticité ou l'aléat a augmenté la perspicacité et amis en lumière d'importantes relations entre l'incertitude, la fiabilité, le risque, et leur effet sur les coûts de fonctionnement, il a également (a) introduit une complexité additionnelle qui résulte dans un pouvoir prohibitif des moyens de calcul informatique même pour une simple estimation de l'incertitude; et (b) a conduita une reconnaissance de notre manque d'aptitude à maîtriser l'incertitude totale même en introduisant tous les paramètres connus de l'incertitude. La représentation du changement est introduit: une adaptation de nouvelles méthodes de contrôle intelligent qui va relâcher la dépendance à la rigidité des algorithmes, aux calculs informatiques intensifs, à la PDE stockastique, et qui modifiera l'emphase entre les MRDS—systèmes interactifs d'aide à la décision de multiresolutionelle (flexibles, adaptables et orientables selon les objectifs)—avec un fort apprentissage non (orienté vers l'anticipation plutôt que la prédiction), et une capacité d'optimisation efficiente très élevée, qui pourrait apporter le besoin de solutions pour la modélisation des problèmes de management des aquifères réalistes. Cet article met en lumière les liens entre les développements passés et les futurs moyens d'optimisation, de gestion et de contrôle des systèmes hydrogéologiques. A pesar de nuevos avances notables en hidrología estocástica y las adaptaciones de métodos avanzados de investigación de operaciones, control estocástico, e inteligencia artificial, las soluciones de problemas complejos del mundo real en hidrogeología han sido bastante limitadas. La principal razón es la dependencia definitiva en modelos de primer-principio que conducen a ecuaciones parciales diferencias de parámetro distribuido complejas (PDE) a una escala dada. Mientras que la adición de incertidumbre, y por lo tanto, estocasticidad o aleatoriedad ha incrementado la profundidad y resaltado relaciones importantes entre la incertidumbre, confiabilidad, riesgo, y su efecto en la función de costo, la adición también ha permitido (a) introducir complejidad adicional que resulta en potencia computacional excesiva aún para un solo parámetro incierto/aleatorio; y (b) llevar a reconocer nuestra discapacidad para evaluar la incertidumbre completa aún cuando se incluyen todos los parámetros inciertos. Se introduce un cambio paradigmático: una adaptación de nuevos métodos de control de inteligencia que relajarála dependencia en PDE estocásticas, rígidas y de uso computacional intensivo, cambiando el énfasis hacia un sistema de apoyo de decisiones de propósitos múltiples (MRDS) adaptivo, flexible, y orientadoa objetivos con fuerte aprendizaje sin supervisión (orientado a la anticipación más que a la predicción) con fuerte capacidad de optimización eficiente, lo cual podría aportar las soluciones necesarias a los problemas de manejo reales con los acuíferos. El artículo resalta los vínculos entre desarrollos pasados y control/planificación/optimización futura de sistemas hidrogeológicos.

Controle optique de qubits lies a des centres isoelectroniques d'azote dans le GaAs

NASA Astrophysics Data System (ADS)

Ethier-Majcher, Gabriel

Le traitement de l'information quantique est un domaine de recherche actuellement en pleine effervescence car il laisse entrevoir une revolution dans notre facon de traiter et d'echanger de l'information. D'une part, l'ordinateur quantique promet de resoudre des problemes comme la factorisation d'un polynome de facon beaucoup plus efficace qu'un ordinateur classique. D'autre part, les communications quantiques promettent l'echange d'information de facon fondamentalement inviolable. Afin de tirer pleinement profit de ces nouvelles technologies, il sera avantageux de construire des reseaux quantiques. Dans un tel reseau, des processeurs quantiques, les noeuds, seront connectes par des photons voyageant dans des fibres optiques. Les reseaux quantiques permettront de deployer les communications quantiques a grande echelle et de creer des super-ordinateurs quantiques. La realisation de reseaux quantiques necessitera des interfaces optiques pouvant echanger l'information de facon coherente entre un qubit (bit d'information quantique) et un photon. L'implementation de telles interfaces dans un systeme physique s'avere un important defi scientifique et technologique. Or, les systemes actuellement envisages a cette fin souffrent d'un faible couplage avec la lumiere ou encore de grandes inhomogeneites, constituant des obstacles a la realisation de reseaux a grande echelle. Dans cette these, le potentiel des centres isoelectroniques pour realiser des interfaces optiques est evalue. Deux types de qubits lies a des paires d'azote dans le GaAs sont consideres : les qubits excitoniques et les qubits de spin electronique, controlables par l'intermediaire d'excitons charges. Le controle optique complet des qubits excitoniques est demontre, ce qui constitue la premiere realisation du genre dans les centres isoelectroniques. L'observation d'excitons charges dans ce systeme, liant a la fois des trous lourds et des trous legers, laisse entrevoir de nouvelles possibilites afin de manipuler des spins electroniques. Les excitons et excitons charges lies aux paires d'azote sont etudies par la photoluminescence resolue spatialement. Le controle des qubits excitoniques est realisee a l'aide d'impulsions laser resonantes avec un etat excitonique et l'etat du qubit est lu par sa fluorescence en resonance. Une experience de rotations de Rabi est realisee pour demontrer un controle sur la population du qubit. Cette experience permet d'extraire un moment dipolaire moyen de 27 D pour l'exciton.

Aircraft Trajectories Computation-Prediction-Control (La Trajectoire de l’Avion Calcul-Prediction-Controle). Volume 3

DTIC Science & Technology

1990-05-01

et au suivi des trajcctoires d’a&onefs se subdivise en trois parties: (a) un recueil des r~sumis des contributions - le texte integral sera...Organisation for the Safety of Air Navigation EUROCONTROL Engineering Directorate 72, rue de la Loi B- 1040 Bruxelles Belgium PANEL EXECUTIVE From Europe...AIRCRAFT MOTION IN MOVING AIR b R.Brockhaus DETERMINATION DES LOIS DE GUIDAGE QUASI-OPTIMALES EN TEMPS REEL POUR 4 A-3/4 DES TRAJECTOIRES DAVIONS DE COMBAT

Active Control Technology for Enhanced Performance Operational Capabilities of Military Aircraft, Land Vehicles and Sea Vehicles (Technologies des systemes a commandes actives pour l’amelioration des performances operationnelles des aeronefs militaires, des vehicules terrestres et des vehicules maritimes)

DTIC Science & Technology

2001-06-01

Corrège Buffet Active Control - Experimental and Numerical Results 15 by C. Despré, D. Caruana, A. Mignosi, O. Reberga, M. Corrège, H. Gassot, J.C...Park and S. Menon An Experimental Examination of the Relationship Between Chemiluminescent Light 20 Emissions and Heat-Release Rate Under Non -Adiabatic...D.A. Santavicca An Experimental Study on Actively Controlled Dump Combustors 36 by K. Yu, K.J. Wilson, T.P. Parr and K.C. Schadow xii Theme The

Design of distributed PID-type dynamic matrix controller for fractional-order systems

NASA Astrophysics Data System (ADS)

Wang, Dawei; Zhang, Ridong

2018-01-01

With the continuous requirements for product quality and safety operation in industrial production, it is difficult to describe the complex large-scale processes with integer-order differential equations. However, the fractional differential equations may precisely represent the intrinsic characteristics of such systems. In this paper, a distributed PID-type dynamic matrix control method based on fractional-order systems is proposed. First, the high-order approximate model of integer order is obtained by utilising the Oustaloup method. Then, the step response model vectors of the plant is obtained on the basis of the high-order model, and the online optimisation for multivariable processes is transformed into the optimisation of each small-scale subsystem that is regarded as a sub-plant controlled in the distributed framework. Furthermore, the PID operator is introduced into the performance index of each subsystem and the fractional-order PID-type dynamic matrix controller is designed based on Nash optimisation strategy. The information exchange among the subsystems is realised through the distributed control structure so as to complete the optimisation task of the whole large-scale system. Finally, the control performance of the designed controller in this paper is verified by an example.

Etude critique de la prise en charge de 159 personnes âgées en consultation de psychiatrie

PubMed Central

Ben Thabet, Jihène; Ammar, Yousra; Charfi, Nada; Zouari, Lobna; Zouari, Nasreddine; Gaha, Lotfi; Maalej, Mohamed

2014-01-01

Introduction Le phénomène de vieillissement des populations est associé à une augmentation de la prévalence de la morbidité liée à l’âge. La prescription des psychotropes chez le sujet âgé est de plus en plus fréquente dans les institutions, les doses sont de plus en plus élevées, avec un recours fréquent à une poly pharmacothérapie. Nous nous sommes proposé de décrire les conduites thérapeutiques chez le sujet âgé consultant en psychiatrie, en vue de les confronter aux dernières recommandations en la matière. Méthodes L’étude était de type rétrospectif et descriptif. Elle a concerné les sujets âgés d'au moins 60 ans ayant consulté pour la première fois en psychiatrie, au CHU Hédi Chaker à Sfax, en 2010 ou 2011. Résultats Nous avons colligé 159 dossiers. L’âge moyen était de 73 ans. La démence et les troubles de l'humeur étaient les diagnostics les plus fréquents. Sur le plan thérapeutique, une poly thérapie faite d'au moins deux psychotropes de familles différentes a été prescrite pour 55,9%. Chez 60.3% des sujets, le traitement a été prescrit d'emblée à dose complète. Aucun dossier ne faisait état d'une prise en charge psychothérapeutique. Conclusion La prise en charge des malades de notre étude n’était pas conforme aux recommandations, notamment en matière d'association médicamenteuse, de progression des doses et d'association de la psychothérapie à la pharmacothérapie. L'information des médecins et leur sensibilisation aux particularités du sujet âgé contribuerait à optimiser les soins qui leur sont prodigués, y compris en psychiatrie. PMID:25120873

Effectiveness of an implementation optimisation intervention aimed at increasing parent engagement in HENRY, a childhood obesity prevention programme - the Optimising Family Engagement in HENRY (OFTEN) trial: study protocol for a randomised controlled trial.

PubMed

Bryant, Maria; Burton, Wendy; Cundill, Bonnie; Farrin, Amanda J; Nixon, Jane; Stevens, June; Roberts, Kim; Foy, Robbie; Rutter, Harry; Hartley, Suzanne; Tubeuf, Sandy; Collinson, Michelle; Brown, Julia

2017-01-24

Family-based interventions to prevent childhood obesity depend upon parents' taking action to improve diet and other lifestyle behaviours in their families. Programmes that attract and retain high numbers of parents provide an enhanced opportunity to improve public health and are also likely to be more cost-effective than those that do not. We have developed a theory-informed optimisation intervention to promote parent engagement within an existing childhood obesity prevention group programme, HENRY (Health Exercise Nutrition for the Really Young). Here, we describe a proposal to evaluate the effectiveness of this optimisation intervention in regard to the engagement of parents and cost-effectiveness. The Optimising Family Engagement in HENRY (OFTEN) trial is a cluster randomised controlled trial being conducted across 24 local authorities (approximately 144 children's centres) which currently deliver HENRY programmes. The primary outcome will be parental enrolment and attendance at the HENRY programme, assessed using routinely collected process data. Cost-effectiveness will be presented in terms of primary outcomes using acceptability curves and through eliciting the willingness to pay for the optimisation from HENRY commissioners. Secondary outcomes include the longitudinal impact of the optimisation, parent-reported infant intake of fruits and vegetables (as a proxy to compliance) and other parent-reported family habits and lifestyle. This innovative trial will provide evidence on the implementation of a theory-informed optimisation intervention to promote parent engagement in HENRY, a community-based childhood obesity prevention programme. The findings will be generalisable to other interventions delivered to parents in other community-based environments. This research meets the expressed needs of commissioners, children's centres and parents to optimise the potential impact that HENRY has on obesity prevention. A subsequent cluster randomised controlled pilot trial is planned to determine the practicality of undertaking a definitive trial to robustly evaluate the effectiveness and cost-effectiveness of the optimised intervention on childhood obesity prevention. ClinicalTrials.gov identifier: NCT02675699 . Registered on 4 February 2016.

Les inconvénients de perdre du poids

PubMed Central

Bosomworth, N. John

2012-01-01

Résumé Objectif Explorer les raisons pour lesquelles la perte de poids à long terme échoue la plupart du temps et évaluer les conséquences de diverses trajectoires pondérales, y compris la stabilité, la perte et le gain. Source des données Les études qui évaluent les paramètres pondéraux dans la population sont en majorité observationnelles. Des données probantes de niveau I ont été publiées pour évaluer l’influence des interventions relatives au poids sur la mortalité et la qualité de vie. Message principal Seulement un petit pourcentage des personnes qui désirent perdre du poids réussissent à le faire de manière durable. La mortalité est la plus faible chez les personnes se situant dans la catégorie de poids élevé-normal et surpoids. La trajectoire pondérale la plus sécuritaire est la stabilité du poids avec une optimisation de la condition physique et métabolique. Il est démontré que la mortalité est plus faible chez les personnes ayant des comorbidités reliées à l’obésité si elles perdent du poids. Il est aussi établi que la qualité de vie sur le plan de la santé est meilleure chez les personnes obèses qui perdent du poids. Par contre, la perte de poids chez une personne obèse autrement en santé est associée à une mortalité accrue. Conclusion La perte de poids est recommandable seulement chez les personnes qui ont des comorbidités reliées à l’obésité. Les personnes obèses en santé qui veulent perdre du poids devraient être informées qu’il peut y avoir des risques à le faire. Une stratégie qui se traduit par un indice de masse corporelle stable avec une condition physique et métabolique optimisée, peu importe le poids, est l’option d’intervention la plus sécuritaire en ce qui concerne le poids.

Double protection passive pour les equipages de l’helicoptere d’attaque Tigre : Concept et etude experimentale (Design and Experimental Study of the Passive Double Hearing Protection for the Crew of the Attack Helicopter Tiger)

DTIC Science & Technology

2005-04-01

alain.leger@fr.thalesgroup.com THALES Aerospace Rue Toussaint Catros 33187 Le Haillan FRANCE RESUME Les coques des écouteurs du casque Topowl ont...déjà fait l’objet d’une étude visant à optimiser leur protection auditive dans les stricts budgets de masse et de volume impartis. La présente...techniques audio (p. 17-1 – 17-14). Compte rendu de réunion RTO-MP-HFM-123, Communication 17. Neuilly-sur-Seine, France : RTO. Disponible sur le site

Expert Opinion: Optimising Stent Deployment in Contemporary Practice: The Role of Intracoronary Imaging and Non-compliant Balloons.

PubMed

Seth, Ashok; Gupta, Sajal; Pratap Singh, Vivudh; Kumar, Vijay

2017-09-01

Final stent dimensions remain an important predictor of restenosis, target vessel revascularisation (TVR) and subacute stent thrombosis (ST), even in the drug-eluting stent (DES) era. Stent balloons are usually semi-compliant and thus even high-pressure inflation may not achieve uniform or optimal stent expansion. Post-dilatation with non-compliant (NC) balloons after stent deployment has been shown to enhance stent expansion and could reduce TVR and ST. Based on supporting evidence and in the absence of large prospective randomised outcome-based trials, post-dilatation with an NC balloon to achieve optimal stent expansion and maximal luminal area is a logical technical recommendation, particularly in complex lesion subsets.

Reticulation des fibres lignocellulosiques

NASA Astrophysics Data System (ADS)

Landrevy, Christel

Pour faire face à la crise économique la conception de papier à valeur ajoutée est développée par les industries papetières. Le but de se projet est l'amélioration des techniques actuelles de réticulation des fibres lignocellulosiques de la pâte à papier visant à produire un papier plus résistant. En effet, lors des réactions de réticulation traditionnelles, de nombreuses liaisons intra-fibres se forment ce qui affecte négativement l'amélioration anticipée des propriétés physiques du papier ou du matériau produit. Pour éviter la formation de ces liaisons intra-fibres, un greffage sur les fibres de groupements ne pouvant pas réagir entre eux est nécessaire. La réticulation des fibres par une réaction de « click chemistry » appelée cycloaddition de Huisgen entre un azide et un alcyne vrai, catalysée par du cuivre (CuAAC) a été l'une des solutions trouvée pour remédier à ce problème. De plus, une adaptation de cette réaction en milieux aqueux pourrait favoriser son utilisation en milieu industriel. L'étude que nous désirons entreprendre lors de ce projet vise à optimiser la réaction de CuAAC et les réactions intermédiaires (propargylation, tosylation et azidation) sur la pâte kraft, en milieu aqueux. Pour cela, les réactions ont été adaptées en milieu aqueux sur la cellulose microcristalline afin de vérifier sa faisabilité, puis transférée à la pâte kraft et l'influence de différents paramètres comme le temps de réaction ou la quantité de réactifs utilisée a été étudiée. Dans un second temps, une étude des différentes propriétés conférées au papier par les réactions a été réalisée à partir d'une série de tests papetiers optiques et physiques. Mots Clés Click chemistry, Huisgen, CuAAC, propargylation, tosylation, azidation, cellulose, pâte kraft, milieu aqueux, papier.

UAV path planning using artificial potential field method updated by optimal control theory

NASA Astrophysics Data System (ADS)

Chen, Yong-bo; Luo, Guan-chen; Mei, Yue-song; Yu, Jian-qiao; Su, Xiao-long

2016-04-01

The unmanned aerial vehicle (UAV) path planning problem is an important assignment in the UAV mission planning. Based on the artificial potential field (APF) UAV path planning method, it is reconstructed into the constrained optimisation problem by introducing an additional control force. The constrained optimisation problem is translated into the unconstrained optimisation problem with the help of slack variables in this paper. The functional optimisation method is applied to reform this problem into an optimal control problem. The whole transformation process is deduced in detail, based on a discrete UAV dynamic model. Then, the path planning problem is solved with the help of the optimal control method. The path following process based on the six degrees of freedom simulation model of the quadrotor helicopters is introduced to verify the practicability of this method. Finally, the simulation results show that the improved method is more effective in planning path. In the planning space, the length of the calculated path is shorter and smoother than that using traditional APF method. In addition, the improved method can solve the dead point problem effectively.

Optimal Discrete Event Supervisory Control of Aircraft Gas Turbine Engines

NASA Technical Reports Server (NTRS)

Litt, Jonathan (Technical Monitor); Ray, Asok

2004-01-01

This report presents an application of the recently developed theory of optimal Discrete Event Supervisory (DES) control that is based on a signed real measure of regular languages. The DES control techniques are validated on an aircraft gas turbine engine simulation test bed. The test bed is implemented on a networked computer system in which two computers operate in the client-server mode. Several DES controllers have been tested for engine performance and reliability.

Discrete Event Supervisory Control Applied to Propulsion Systems

NASA Technical Reports Server (NTRS)

Litt, Jonathan S.; Shah, Neerav

2005-01-01

The theory of discrete event supervisory (DES) control was applied to the optimal control of a twin-engine aircraft propulsion system and demonstrated in a simulation. The supervisory control, which is implemented as a finite-state automaton, oversees the behavior of a system and manages it in such a way that it maximizes a performance criterion, similar to a traditional optimal control problem. DES controllers can be nested such that a high-level controller supervises multiple lower level controllers. This structure can be expanded to control huge, complex systems, providing optimal performance and increasing autonomy with each additional level. The DES control strategy for propulsion systems was validated using a distributed testbed consisting of multiple computers--each representing a module of the overall propulsion system--to simulate real-time hardware-in-the-loop testing. In the first experiment, DES control was applied to the operation of a nonlinear simulation of a turbofan engine (running in closed loop using its own feedback controller) to minimize engine structural damage caused by a combination of thermal and structural loads. This enables increased on-wing time for the engine through better management of the engine-component life usage. Thus, the engine-level DES acts as a life-extending controller through its interaction with and manipulation of the engine s operation.

75 FR 25319 - Agency Information Collection (Survey of Satisfaction With the Disability Evaluation System (DES...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-07

... DEPARTMENT OF VETERANS AFFAIRS [OMB Control No. 2900--New (DES)] Agency Information Collection (Survey of Satisfaction With the Disability Evaluation System (DES)) Activities Under OMB Review AGENCY...).'' SUPPLEMENTARY INFORMATION: Title: Survey of Satisfaction with the Disability Evaluation System (DES). OMB...

Error discrimination of an operational hydrological forecasting system at a national scale

NASA Astrophysics Data System (ADS)

Jordan, F.; Brauchli, T.

2010-09-01

The use of operational hydrological forecasting systems is recommended for hydropower production as well as flood management. However, the forecast uncertainties can be important and lead to bad decisions such as false alarms and inappropriate reservoir management of hydropower plants. In order to improve the forecasting systems, it is important to discriminate the different sources of uncertainties. To achieve this task, reanalysis of past predictions can be realized and provide information about the structure of the global uncertainty. In order to discriminate between uncertainty due to the weather numerical model and uncertainty due to the rainfall-runoff model, simulations assuming perfect weather forecast must be realized. This contribution presents the spatial analysis of the weather uncertainties and their influence on the river discharge prediction of a few different river basins where an operational forecasting system exists. The forecast is based on the RS 3.0 system [1], [2], which is also running the open Internet platform www.swissrivers.ch [3]. The uncertainty related to the hydrological model is compared to the uncertainty related to the weather prediction. A comparison between numerous weather prediction models [4] at different lead times is also presented. The results highlight an important improving potential of both forecasting components: the hydrological rainfall-runoff model and the numerical weather prediction models. The hydrological processes must be accurately represented during the model calibration procedure, while weather prediction models suffer from a systematic spatial bias. REFERENCES [1] Garcia, J., Jordan, F., Dubois, J. & Boillat, J.-L. 2007. "Routing System II, Modélisation d'écoulements dans des systèmes hydrauliques", Communication LCH n° 32, Ed. Prof. A. Schleiss, Lausanne [2] Jordan, F. 2007. Modèle de prévision et de gestion des crues - optimisation des opérations des aménagements hydroélectriques à accumulation pour la réduction des débits de crue, thèse de doctorat n° 3711, Ecole Polytechnique Fédérale, Lausanne [3] Keller, R. 2009. "Le débit des rivières au peigne fin", Revue Technique Suisse, N°7/8 2009, Swiss engineering RTS, UTS SA, Lausanne, p. 11 [4] Kaufmann, P., Schubiger, F. & Binder, P. 2003. Precipitation forecasting by a mesoscale numerical weather prediction (NWP) model : eight years of experience, Hydrology and Earth System

Nonlinear predictive control of a boiler-turbine unit: A state-space approach with successive on-line model linearisation and quadratic optimisation.

PubMed

Ławryńczuk, Maciej

2017-03-01

This paper details development of a Model Predictive Control (MPC) algorithm for a boiler-turbine unit, which is a nonlinear multiple-input multiple-output process. The control objective is to follow set-point changes imposed on two state (output) variables and to satisfy constraints imposed on three inputs and one output. In order to obtain a computationally efficient control scheme, the state-space model is successively linearised on-line for the current operating point and used for prediction. In consequence, the future control policy is easily calculated from a quadratic optimisation problem. For state estimation the extended Kalman filter is used. It is demonstrated that the MPC strategy based on constant linear models does not work satisfactorily for the boiler-turbine unit whereas the discussed algorithm with on-line successive model linearisation gives practically the same trajectories as the truly nonlinear MPC controller with nonlinear optimisation repeated at each sampling instant. Copyright © 2017 ISA. Published by Elsevier Ltd. All rights reserved.

Optimised collision avoidance for an ultra-close rendezvous with a failed satellite based on the Gauss pseudospectral method

NASA Astrophysics Data System (ADS)

Chu, Xiaoyu; Zhang, Jingrui; Lu, Shan; Zhang, Yao; Sun, Yue

2016-11-01

This paper presents a trajectory planning algorithm to optimise the collision avoidance of a chasing spacecraft operating in an ultra-close proximity to a failed satellite. The complex configuration and the tumbling motion of the failed satellite are considered. The two-spacecraft rendezvous dynamics are formulated based on the target body frame, and the collision avoidance constraints are detailed, particularly concerning the uncertainties. An optimisation solution of the approaching problem is generated using the Gauss pseudospectral method. A closed-loop control is used to track the optimised trajectory. Numerical results are provided to demonstrate the effectiveness of the proposed algorithms.

Facteurs de risque de l'inobservance thérapeutique chez les patients schizophrènes: étude cas- témoins'

PubMed Central

Aarab, Chadya; Elghazouani, Fatima; Aalouane, Rachid; Rammouz, Ismail

2015-01-01

Les progrès réalisés dans le traitement de la schizophrénie n'ont jusqu'ici pas modifié de manière radicale l'importance de l'adhésion des patients à leur médication. L'objectif de ce travail est d'identifier les facteurs de risque de l'abandon du traitement sur un échantillon marocain de malades schizophrènes. C'est une étude transversale menée au centre psychiatrique universitaire de Fès sur une période de 4 mois. Les malades inclus présentaient une schizophrénie ou un trouble schizo-affectif, sélectionnés en deux groupes observant et non observant. L’évaluation de l'observance a été faite par un hétéro-questionnaire comprenant une liste de causes d'abandon du traitement avec des réponses par oui ou non et à l'aide de l’échelle MARS (Medication Adherence Rating Scale). Le traitement statistique des résultats a été réalisé par le logiciel Epi Info version 3.5.1. On a recruté 164 participants, 112 étaient des malades non observants à leur traitement (cas) et 52 patients bien observants (témoins). L’âge moyen est 31 ans, avec une prédominance masculine. Les facteurs de risque d'inobservance thérapeutique sont: l’âge jeune, le sexe masculin, le célibat, les troubles addictifs. Les principales raisons d'abandon du traitement sont le changement fréquent du médecin, le manque d'informations sur la maladie, un mauvais insight et les effets secondaires des antipsychotiques. Le groupe de schizophrènes non adhérents à leur traitement pharmacologique avait un score élevé à l’échelle MARS dans 80% cas. Ces résultats doivent être pris en considération par le personnel soignant pour optimiser l'observance thérapeutique chez les patients souffrant de schizophrénie. PMID:26161196

Identification des objets et detection de leur alignement en utilisant la technologie RFID

NASA Astrophysics Data System (ADS)

Rahma, Zayoud

De nos jours, les vehicules motorises sont essentiels dans notre vie quotidienne, d'ou la necessite de leur approvisionnement en carburant. L'approvisionnement en carburant peut entrainer certains inconvenients, tels que: les files d'attente, la disponibilite non-continuelle du carburant et les fraudes. Les problemes d'attente et de disponibilite non-continuelle du carburant peuvent etre facilement resolus en allant a une autre station d'essence aux alentours si disponibles. Par contre le probleme de fraudes est plus difficile a resoudre. De ce fait, decoule notre solution qui consiste a developper un systeme intelligent pour la gestion d'approvisionnement en carburant afin de remedier a ce probleme de fraudes. Pour des raisons de surete, il faut eviter les risques d'etincelles dans l'environnement du carburant. En particulier, il convient de ne pas utiliser un systeme utilisant 1'electricite proche de la pompe, du tuyau ou du reservoir du carburant du vehicule. Nous avons choisi la technologie RFID (Radio Frequency IDentification) et avons opte pour l'utilisation des etiquettes passives, etant donne que les etiquettes semi-passives ou actives contiennent une batterie electrique et sont nettement plus cheres. Un vehicule motorise sera identifie avec une etiquette RFID passive collee au-dessus du goulot de son reservoir. Deux autres etiquettes RFID seront placees sur le pistolet de sorte que le flux du carburant ne sera autorise que lorsque les trois etiquettes sont alignees. Notre travail etait a la demande d'une entreprise petroliere ayant une chaine internationale de stations de carburant. Le travail consiste en la conception, par la recherche, du systeme requis et s'articule sur l'optimisation de la topologie des antennes et des etiquettes de sorte que le systeme juge qu'il y a alignement lorsque le bec du pistolet est fonce dans le goulot du reservoir, et par consequent autorise le versement du carburant. Dans tous les autres cas, le systeme doit juger qu'il n'y a pas alignement et par consequent le flux du carburant n'est pas autorise. Mots cles: RFID, identification, localisation, alignement, fraudes, station-service.

Multi-objective optimisation of wastewater treatment plant control to reduce greenhouse gas emissions.

PubMed

Sweetapple, Christine; Fu, Guangtao; Butler, David

2014-05-15

This study investigates the potential of control strategy optimisation for the reduction of operational greenhouse gas emissions from wastewater treatment in a cost-effective manner, and demonstrates that significant improvements can be realised. A multi-objective evolutionary algorithm, NSGA-II, is used to derive sets of Pareto optimal operational and control parameter values for an activated sludge wastewater treatment plant, with objectives including minimisation of greenhouse gas emissions, operational costs and effluent pollutant concentrations, subject to legislative compliance. Different problem formulations are explored, to identify the most effective approach to emissions reduction, and the sets of optimal solutions enable identification of trade-offs between conflicting objectives. It is found that multi-objective optimisation can facilitate a significant reduction in greenhouse gas emissions without the need for plant redesign or modification of the control strategy layout, but there are trade-offs to consider: most importantly, if operational costs are not to be increased, reduction of greenhouse gas emissions is likely to incur an increase in effluent ammonia and total nitrogen concentrations. Design of control strategies for a high effluent quality and low costs alone is likely to result in an inadvertent increase in greenhouse gas emissions, so it is of key importance that effects on emissions are considered in control strategy development and optimisation. Copyright © 2014 Elsevier Ltd. All rights reserved.

Hypermethylation of Homeobox A10 by in Utero Diethylstilbestrol Exposure: An Epigenetic Mechanism for Altered Developmental Programming

PubMed Central

Bromer, Jason G.; Wu, Jie; Zhou, Yuping; Taylor, Hugh S.

2009-01-01

Diethylstilbestrol (DES) is a nonsteroidal estrogen that induces developmental anomalies of the female reproductive tract. The homeobox gene HOXA10 controls uterine organogenesis, and its expression is altered after in utero DES exposure. We hypothesized that an epigenetic mechanism underlies DES-mediated alterations in HOXA10 expression. We analyzed the expression pattern and methylation profile of HOXA10 after DES exposure. Expression of HOXA10 is increased in human endometrial cells after DES exposure, whereas Hoxa10 expression is repressed and shifted caudally from its normal location in mice exposed in utero. Cytosine guanine dinucleotide methylation frequency in the Hoxa10 intron was higher in DES-exposed offspring compared with controls (P = 0.017). The methylation level of Hoxa10 was also higher in the caudal portion of the uterus after DES exposure at the promoter and intron (P < 0.01). These changes were accompanied by increased expression of DNA methyltransferases 1 and 3b. No changes in methylation were observed after in vitro or adult DES exposure. DES has a dual mechanism of action as an endocrine disruptor; DES functions as a classical estrogen and directly stimulates HOXA10 expression with short-term exposure, however, in utero exposure results in hypermethylation of the HOXA10 gene and long-term altered HOXA10 expression. We identify hypermethylation as a novel mechanism of DES-induced altered developmental programming. PMID:19299448

The human desmin locus: gene organization and LCR-mediated transcriptional control.

PubMed

Tam, Jennifer L Y; Triantaphyllopoulos, Kostas; Todd, Helen; Raguz, Selina; de Wit, Ton; Morgan, Jennifer E; Partridge, Terence A; Makrinou, Eleni; Grosveld, Frank; Antoniou, Michael

2006-06-01

Locus control regions (LCRs) are defined by their ability to confer reproducible physiological levels of transgene expression in mice and therefore thought to possess the ability to generate dominantly a transcriptionally active chromatin structure. We report the first characterization of a muscle-cell-specific LCR, which is linked to the human desmin gene (DES). The DES LCR consists of five regions of muscle-specific DNase I hypersensitivity (HS) localized between -9 and -18 kb 5' of DES and reproducibly drives full physiological levels of expression in all muscle cell types. The DES LCR DNase I HS regions are highly conserved between humans and other mammals and can potentially bind a broad range of muscle-specific and ubiquitous transcription factors. Bioinformatics and direct molecular analysis show that the DES locus consists of three muscle-specific (DES) or muscle preferentially expressed genes (APEG1 and SPEG, the human orthologue of murine striated-muscle-specific serine/threonine protein kinase, Speg). The DES LCR may therefore regulate expression of SPEG and APEG1 as well as DES.

Hierarchical Discrete Event Supervisory Control of Aircraft Propulsion Systems

NASA Technical Reports Server (NTRS)

Yasar, Murat; Tolani, Devendra; Ray, Asok; Shah, Neerav; Litt, Jonathan S.

2004-01-01

This paper presents a hierarchical application of Discrete Event Supervisory (DES) control theory for intelligent decision and control of a twin-engine aircraft propulsion system. A dual layer hierarchical DES controller is designed to supervise and coordinate the operation of two engines of the propulsion system. The two engines are individually controlled to achieve enhanced performance and reliability, necessary for fulfilling the mission objectives. Each engine is operated under a continuously varying control system that maintains the specified performance and a local discrete-event supervisor for condition monitoring and life extending control. A global upper level DES controller is designed for load balancing and overall health management of the propulsion system.

Activity of [des-Aspartyl1]-Angiotensin II in Primary Aldosteronism

PubMed Central

Carey, Robert M.; Ayers, Carlos R.; Vaughan, E. Darracott; Peach, Michael J.; Herf, Steven M.

1979-01-01

This study describes the effects of [des-Aspartyl1]-angiotensin II ([des-Asp]-AII) on blood pressure and aldosterone production in patients with primary aldosteronism due to aldosterone-producing adrenal adenoma (APA) and idiopathic adrenal hyperplasia (IHA), and in normotensive control subjects. 10 patients with primary aldosteronism, 7 with APA and 3 with IHA, and 6 normotensive control subjects were placed on a constant 150-meq sodium diet for 4 days. [des-Asp]-AII was infused for 30 min at 6, 12, and 18 pmol/kg per min. Three groups of patients were identified on the basis of aldosterone response to [des-Asp]-AII. Group I, composed of normotensive control subjects, showed incremental increases in plasma aldosterone concentration from 6±1 to 14±3 ng/100 ml (P < 0.01) with [des-Asp]-AII infusion. Group II, composed of patients with primary aldosteronism, showed incremental increases in plasma aldosterone concentration from 33±8 to 65±13 ng/100 ml (P < 0.05) with 12 pmol/kg per min of [des-Asp]-AII. Group III, also composed of patients with primary aldosteronism, showed no increase of plasma aldosterone concentration with [des-Asp]-AII. Groups I and II showed similar percentage increases in plasma aldosterone concentration (P = NS). Group III showed significantly lower aldosterone responses than group I (P < 0.01). Group II included all patients with IHA and two patients with APA. Group III included only patients with APA. The blood pressure responses to [des-Asp]-AII of subjects in group I did not differ significantly from those of groups II or III. Thus, patients with IHA and a subgroup of patients with APA showed responsiveness to [des-Asp]-AII which was limited to adrenal cortical stimulation of aldosterone biosynthesis. This suggests that adrenal responsiveness to angiotensin is a major control mechanism in some forms of primary aldosteronism. The differential adrenal responsiveness to [des-Asp]-AII in patients with APA indicates either that there are two distinct subpopulations of APA, or that alteration in tumor response to angiotensin occurs during the natural progression of the disease history. PMID:438332

Distributed convex optimisation with event-triggered communication in networked systems

NASA Astrophysics Data System (ADS)

Liu, Jiayun; Chen, Weisheng

2016-12-01

This paper studies the distributed convex optimisation problem over directed networks. Motivated by practical considerations, we propose a novel distributed zero-gradient-sum optimisation algorithm with event-triggered communication. Therefore, communication and control updates just occur at discrete instants when some predefined condition satisfies. Thus, compared with the time-driven distributed optimisation algorithms, the proposed algorithm has the advantages of less energy consumption and less communication cost. Based on Lyapunov approaches, we show that the proposed algorithm makes the system states asymptotically converge to the solution of the problem exponentially fast and the Zeno behaviour is excluded. Finally, simulation example is given to illustrate the effectiveness of the proposed algorithm.

Letter to the editor concerning the article "Effects of acoustic feedback training in elite-standard Para-Rowing" by Schaffert and Mattes (2015).

PubMed

Hill, Holger

2015-01-01

In a case study, Schaffert and Mattes reported the application of acoustic feedback (sonification) to optimise the time course of boat acceleration. The authors attributed an increased boat speed in the feedback condition to an optimised boat acceleration (mainly during the recovery phase). However, in rowing it is biomechanically impossible to increase the boat speed significantly by reducing the fluctuations in boat acceleration during the rowing cycle. To assess such a, potentially small, optimising effect experimentally, the confounding variables must be controlled very accurately (that is especially the propulsive forces must be kept constant between experimental conditions or the differences in propulsive forces between conditions must be much smaller than the effects on boat speed resulting from an optimised movement pattern). However, this was not controlled adequately by the authors. Instead, the presented boat acceleration data show that the increased boat speed under acoustic feedback was due to increased propulsive forces.

Applications of Composite Materials in Helicopter Construction (Les Applications des Materiaux Composite dans la Construction des Helicopteres),

DTIC Science & Technology

1983-11-21

TRANSLATION TITLE: APPLICATIONS OF COMPOSITE MATERIALS IN HELICOPTER CONSTRUCTION LES APPLICATIONS DES MATERTAUX COMWSITE DANS LA CONSTRUCTION DES...International Symposium on Design and Use of Kevlar in Aircraft, Geneva, 12 October 1982 [Beziac, Gilbert;* Les applications des mat6riaux composite...the pilot’s orders to the engine and the rotors. --Rear rotor Conventional or "faired propeller" type with its overall pitch control --Vibration

Optimisation of lateral car dynamics taking into account parameter uncertainties

NASA Astrophysics Data System (ADS)

Busch, Jochen; Bestle, Dieter

2014-02-01

Simulation studies on an active all-wheel-steering car show that disturbance of vehicle parameters have high influence on lateral car dynamics. This motivates the need of robust design against such parameter uncertainties. A specific parametrisation is established combining deterministic, velocity-dependent steering control parameters with partly uncertain, velocity-independent vehicle parameters for simultaneous use in a numerical optimisation process. Model-based objectives are formulated and summarised in a multi-objective optimisation problem where especially the lateral steady-state behaviour is improved by an adaption strategy based on measurable uncertainties. The normally distributed uncertainties are generated by optimal Latin hypercube sampling and a response surface based strategy helps to cut down time consuming model evaluations which offers the possibility to use a genetic optimisation algorithm. Optimisation results are discussed in different criterion spaces and the achieved improvements confirm the validity of the proposed procedure.

Intrinsic mechanical properties and strengthening methods in inorganic crystalline materials

NASA Astrophysics Data System (ADS)

Mecking, H.; Hartig, Ch.; Seeger, J.

1991-06-01

The paper deals with strength and fracture in metals, ceramics and intermetallic compounds. The emphasis is on the interrelation between microstructure and macroscopic behavior and how the concepts for alloy design are mirroring this interrelationship. The three materials classes are distinguished by the physical nature of the atomic bonding forces. In metals metallic bonding predominates which causes high ductility but poor strength. Accordingly material development concentrates on production of microstructures which optimize the yield strength without unacceptable loss in ductility. In ceramics covalent bonding prevails which results in high hardness and high elastic stiffness but at the same time extreme brittleness. Contrary to the metal-ease material development aims at a kind of pseudo ductility in order to rise the fracture toughness to sufficiently high levels. In intermetallic phases the atomic bonds are a mixture of metallic and covalent bonding where depending on the alloying system the balance between the two contributions may be quite different. Accordingly the properties of intermetallics are in the range between metals and ceramics. By a variety of microstructural measures their properties can be changed in direction. either towards metallic or ceramic behavior. General rules for alloy design are not available, rather every system demands very specific experience since properties depend to a considerable part on intrinsic properties of lattice defects such as dislocations, antiphase boundaries, stacking faults and grain boundaries. Cet article traite de la résistance et de la fracture des métaux, des céramiques et des composés intermétalliques. L'accent est mis sur les correspondances entre la microstructure et le comportement macroscopique ainsi que sur la façon dont de tels concepts se reflètent dans la création de nouveaux alliages. C'est la nature des forces de liaisons qui distingue chaque type de matériaux. Dans les métaux, les liaisons métalliques dominent, ce qui entraîne une grande ductilité mais une médiocre résistance. En conséquence, dans le développement de nouveaux matériaux on cherche préférentiellement à produire des microstructures qui optimisent la résistance élastique sans perte inacceptable de ductilité. Dans les céramiques, les liaisons covalentes prédominent; ceci entraîne une dureté élevée, une grande rigidité, mais en même temps une extrême fragilité. Au contraire des métaux, le développement de ces matériaux vise à obtenir une pseudoductilité afin d'amener la tenacité à des niveaux suffisamment élevés. Dans les phases intermétalliques les liaisons atomiques correspondent à un mélange de liaisons métalliques et covalentes. La contribution de chacune d'entre elles varie en fonction du système allié. En conséquence, les propriétés des intermétalliques se situent entre celles des métaux et des céramiques. Par divers changements microstructuraux des propriétés peuvent être déplacées pour se rapprocher d'un comportement de type métallique ou de type céramique. Donner des règles générales pour la création de nouveaux alliages n'est pas possible car chaque système demande à être testé, les propriétés dépendent en effet, pour une part considérable, des propriétés intrinsèques des défauts de réseau comme les dislocations, les parois d'antiphase ou les joints de grains.

Optimisation of flight dynamic control based on many-objectives meta-heuristic: a comparative study

NASA Astrophysics Data System (ADS)

Bureerat, Sujin; Pholdee, Nantiwat; Radpukdee, Thana

2018-05-01

Development of many objective meta-heuristics (MnMHs) is a currently interesting topic as they are suitable to real applications of optimisation problems which usually require many ob-jectives. However, most of MnMHs have been mostly developed and tested based on stand-ard testing functions while the use of MnMHs to real applications is rare. Therefore, in this work, MnMHs are applied for optimisation design of flight dynamic control. The design prob-lem is posed to find control gains for minimising; the control effort, the spiral root, the damp-ing in roll root, sideslip angle deviation, and maximising; the damping ratio of the dutch-roll complex pair, the dutch-roll frequency, bank angle at pre-specified times 1 seconds and 2.8 second subjected to several constraints based on Military Specifications (1969) requirement. Several established many-objective meta-heuristics (MnMHs) are used to solve the problem while their performances are compared. With this research work, performance of several MnMHs for flight control is investigated. The results obtained will be the baseline for future development of flight dynamic and control.

Epidémiologie et facteurs de risque des complications respiratoires majeures après chirurgie de l'aorte abdominale au CHU Ibn Sina, Maroc

PubMed Central

Awab, Almahdi; Elahmadi, Brahim; Lamkinsi, Tarik; El Moussaoui, Rachid; El Hijri, Ahmed; Azzouzi, Abderrahim; Alilou, Mustapha

2013-01-01

Introduction L'incidence des complications respiratoires postopératoires (CRPO) reste très diversement appréciées selon les critères diagnostiques retenues dans les différentes études, ce qui la fait varier de 5 à plus de 50%. Les CRPO majeurs après chirurgie de l'aorte abdominale sont responsables d'une grande morbi-mortalité pouvant aller jusqu’à 36%, d'une durée d'hospitalisation et d'un coût plus importants. Ainsi dans l'optique d'améliorer notre prise en charge périopératoire de la chirurgie de l'aorte, nous avons décidé de mener une étude pour dresser le profil épidémiologique et déterminer les facteurs de risque des complications respiratoires dans notre contexte Méthodes Il s'agit d'une étude de cohorte rétrospective du mois de Janvier 2007 au mois de décembre 2011 portant sur l'ensemble des patients opérés pour pathologie aortique au bloc opératoire central de l'hôpital Ibn Sina de Rabat, Maroc. Résultats Cent vingt cinq patients ont été inclus dans notre étude, 24 patients ont été opérés pour anévrysme de l'aorte abdominale et 101 patients pour lésion occlusive aortoiliaque. Dans notre série 22 malades soit 17,6% ont présenté une complication respiratoire majeure avec, une reventilation dans 4,8% des cas, une difficulté de sevrage de la ventilation artificielle dans 3,2% des cas, une pneumopathie dans 4% des cas, un syndrome de détresse respiratoire aigue (SDRA) dans 4% des cas et une nécessité de fibroaspiration bronchique dans 1,6% des cas. En analyse univariée: l’âge, la présence d'une BPCO avec dyspnée stade 3 ou 4, la présence d'une anomalie à l'EFR préopératoire, la présence d'un stade avancé (III ou IV) de LOAI et la reprise chirurgicale étaient statistiquement associés à la survenue d'une complication respiratoire postopératoire. En analyse multivariée, seule une anomalie à l'EFR en préopératoire constituait un facteur de risque indépendant de survenue d'une complication respiratoire postopératoire dans notre série avec un Odds Ratio (OR): 11,5; un Intervalle de Confiance (IC) à 95% de (1,6 - 85,2) et un p = 0,016. Conclusion Au terme de notre étude, il nous parait donc nécessaire pour diminuer l'incidence des CRPO majeurs dans notre population, d'agir sur les facteurs que nous jugeons modifiables tel l'amélioration de l’état respiratoire basal moyennant une préparation respiratoire préopératoire, s'intégrant dans un véritable programme de réhabilitation et associant une rééducation à l'effort, une kinésithérapie incitative ainsi qu'une optimisation des thérapeutiques habituelles. PMID:23504435

Lap time simulation and design optimisation of a brushed DC electric motorcycle for the Isle of Man TT Zero Challenge

NASA Astrophysics Data System (ADS)

Dal Bianco, N.; Lot, R.; Matthys, K.

2018-01-01

This works regards the design of an electric motorcycle for the annual Isle of Man TT Zero Challenge. Optimal control theory was used to perform lap time simulation and design optimisation. A bespoked model was developed, featuring 3D road topology, vehicle dynamics and electric power train, composed of a lithium battery pack, brushed DC motors and motor controller. The model runs simulations over the entire ? or ? of the Snaefell Mountain Course. The work is validated using experimental data from the BX chassis of the Brunel Racing team, which ran during the 2009 to 2015 TT Zero races. Optimal control is used to improve drive train and power train configurations. Findings demonstrate computational efficiency, good lap time prediction and design optimisation potential, achieving a 2 minutes reduction of the reference lap time through changes in final drive gear ratio, battery pack size and motor configuration.

Convex optimisation approach to constrained fuel optimal control of spacecraft in close relative motion

NASA Astrophysics Data System (ADS)

Massioni, Paolo; Massari, Mauro

2018-05-01

This paper describes an interesting and powerful approach to the constrained fuel-optimal control of spacecraft in close relative motion. The proposed approach is well suited for problems under linear dynamic equations, therefore perfectly fitting to the case of spacecraft flying in close relative motion. If the solution of the optimisation is approximated as a polynomial with respect to the time variable, then the problem can be approached with a technique developed in the control engineering community, known as "Sum Of Squares" (SOS), and the constraints can be reduced to bounds on the polynomials. Such a technique allows rewriting polynomial bounding problems in the form of convex optimisation problems, at the cost of a certain amount of conservatism. The principles of the techniques are explained and some application related to spacecraft flying in close relative motion are shown.

Fault-tolerant optimised tracking control for unknown discrete-time linear systems using a combined reinforcement learning and residual compensation methodology

NASA Astrophysics Data System (ADS)

Han, Ke-Zhen; Feng, Jian; Cui, Xiaohong

2017-10-01

This paper considers the fault-tolerant optimised tracking control (FTOTC) problem for unknown discrete-time linear system. A research scheme is proposed on the basis of data-based parity space identification, reinforcement learning and residual compensation techniques. The main characteristic of this research scheme lies in the parity-space-identification-based simultaneous tracking control and residual compensation. The specific technical line consists of four main contents: apply subspace aided method to design observer-based residual generator; use reinforcement Q-learning approach to solve optimised tracking control policy; rely on robust H∞ theory to achieve noise attenuation; adopt fault estimation triggered by residual generator to perform fault compensation. To clarify the design and implementation procedures, an integrated algorithm is further constructed to link up these four functional units. The detailed analysis and proof are subsequently given to explain the guaranteed FTOTC performance of the proposed conclusions. Finally, a case simulation is provided to verify its effectiveness.

Path optimisation of a mobile robot using an artificial neural network controller

NASA Astrophysics Data System (ADS)

Singh, M. K.; Parhi, D. R.

2011-01-01

This article proposed a novel approach for design of an intelligent controller for an autonomous mobile robot using a multilayer feed forward neural network, which enables the robot to navigate in a real world dynamic environment. The inputs to the proposed neural controller consist of left, right and front obstacle distance with respect to its position and target angle. The output of the neural network is steering angle. A four layer neural network has been designed to solve the path and time optimisation problem of mobile robots, which deals with the cognitive tasks such as learning, adaptation, generalisation and optimisation. A back propagation algorithm is used to train the network. This article also analyses the kinematic design of mobile robots for dynamic movements. The simulation results are compared with experimental results, which are satisfactory and show very good agreement. The training of the neural nets and the control performance analysis has been done in a real experimental setup.

A conceptual modeling framework for discrete event simulation using hierarchical control structures.

PubMed

Furian, N; O'Sullivan, M; Walker, C; Vössner, S; Neubacher, D

2015-08-01

Conceptual Modeling (CM) is a fundamental step in a simulation project. Nevertheless, it is only recently that structured approaches towards the definition and formulation of conceptual models have gained importance in the Discrete Event Simulation (DES) community. As a consequence, frameworks and guidelines for applying CM to DES have emerged and discussion of CM for DES is increasing. However, both the organization of model-components and the identification of behavior and system control from standard CM approaches have shortcomings that limit CM's applicability to DES. Therefore, we discuss the different aspects of previous CM frameworks and identify their limitations. Further, we present the Hierarchical Control Conceptual Modeling framework that pays more attention to the identification of a models' system behavior, control policies and dispatching routines and their structured representation within a conceptual model. The framework guides the user step-by-step through the modeling process and is illustrated by a worked example.

A conceptual modeling framework for discrete event simulation using hierarchical control structures

PubMed Central

Furian, N.; O’Sullivan, M.; Walker, C.; Vössner, S.; Neubacher, D.

2015-01-01

Conceptual Modeling (CM) is a fundamental step in a simulation project. Nevertheless, it is only recently that structured approaches towards the definition and formulation of conceptual models have gained importance in the Discrete Event Simulation (DES) community. As a consequence, frameworks and guidelines for applying CM to DES have emerged and discussion of CM for DES is increasing. However, both the organization of model-components and the identification of behavior and system control from standard CM approaches have shortcomings that limit CM’s applicability to DES. Therefore, we discuss the different aspects of previous CM frameworks and identify their limitations. Further, we present the Hierarchical Control Conceptual Modeling framework that pays more attention to the identification of a models’ system behavior, control policies and dispatching routines and their structured representation within a conceptual model. The framework guides the user step-by-step through the modeling process and is illustrated by a worked example. PMID:26778940

Effect of in-utero diethylstilboestrol exposure on human oocyte quality and fertilization in a programme of in-vitro fertilization.

PubMed

Kerjean, A; Poirot, C; Epelboin, S; Jouannet, P

1999-06-01

Genital tract abnormalities and adverse pregnancy outcome are well known in women exposed in utero to diethylstilboestrol (DES). Data about adverse reproductive performance in women exposed to DES have been published, including controversial reports of menstrual dysfunction, poor responses after ovarian stimulation, oocyte maturation and fertilization abnormalities. We compared oocyte quality, in-vitro fertilization results and embryo quality for women exposed in utero to DES with a control group. Between 1989 and 1996, 56 DES-exposed women who had 125 in-vitro fertilization (IVF) attempts were retrospectively compared to a control group of 45 women with tubal disease, who underwent 73 IVF attempts. Couples suffering from male infertility were excluded. The parameters compared were oocyte quality (maturation abnormalities, immature oocyte, mature oocyte), fertilization and cleavage rate (per treated and metaphase II oocytes), and embryo quality (number and grade). We found no significant difference in oocyte maturational status, fertilization rates, cleavage rates, embryo quality and development between DES-exposed subjects and control subjects. These results suggest that in-utero exposure to DES has no significant influence on oocyte quality and fertilization ability as judged during IVF attempts.

Developpement d'une commande pour une hydrolienne de riviere et optimisation =

NASA Astrophysics Data System (ADS)

Tetrault, Philippe

Suivant le developpement des energies renouvelables, la presente etude se veut une base theorique quant aux principes fondamentaux necessaires au bon fonctionnement et a l'implementation d'une hydrolienne de riviere. La problematique derriere ce nouveau type d'appareil est d'abord presentee. La machine electrique utilisee dans l'application, c'est-a-dire la machine synchrone a aimants permanents, est etudiee : ses equations dynamiques mecaniques et electriques sont developpees, introduisant en meme temps le concept de referentiel tournant. Le fonctionnement de l'onduleur utilise, soit un montage en pont complet a deux niveaux a semi-conducteurs, est explique et mit en equation pour permettre de comprendre les strategies de modulation disponibles. Un bref historique de ces strategies est fait avant de mettre l'emphase sur la modulation vectorielle qui sera celle utilisee pour l'application en cours. Les differents modules sont assembles dans une simulation Matlab pour confirmer leur bon fonctionnement et comparer les resultats de la simulation avec les calculs theoriques. Differents algorithmes permettant de traquer et maintenir un point de fonctionnement optimal sont presentes. Le comportement de la riviere est etudie afin d'evaluer l'ampleur des perturbations que le systeme devra gerer. Finalement, une nouvelle approche est presentee et comparee a une strategie plus conservatrice a l'aide d'un autre modele de simulation Matlab.

Optimal coordinated voltage control in active distribution networks using backtracking search algorithm

PubMed Central

Tengku Hashim, Tengku Juhana; Mohamed, Azah

2017-01-01

The growing interest in distributed generation (DG) in recent years has led to a number of generators connected to a distribution system. The integration of DGs in a distribution system has resulted in a network known as active distribution network due to the existence of bidirectional power flow in the system. Voltage rise issue is one of the predominantly important technical issues to be addressed when DGs exist in an active distribution network. This paper presents the application of the backtracking search algorithm (BSA), which is relatively new optimisation technique to determine the optimal settings of coordinated voltage control in a distribution system. The coordinated voltage control considers power factor, on-load tap-changer and generation curtailment control to manage voltage rise issue. A multi-objective function is formulated to minimise total losses and voltage deviation in a distribution system. The proposed BSA is compared with that of particle swarm optimisation (PSO) so as to evaluate its effectiveness in determining the optimal settings of power factor, tap-changer and percentage active power generation to be curtailed. The load flow algorithm from MATPOWER is integrated in the MATLAB environment to solve the multi-objective optimisation problem. Both the BSA and PSO optimisation techniques have been tested on a radial 13-bus distribution system and the results show that the BSA performs better than PSO by providing better fitness value and convergence rate. PMID:28991919

Optimal coordinated voltage control in active distribution networks using backtracking search algorithm.

PubMed

Tengku Hashim, Tengku Juhana; Mohamed, Azah

2017-01-01

The growing interest in distributed generation (DG) in recent years has led to a number of generators connected to a distribution system. The integration of DGs in a distribution system has resulted in a network known as active distribution network due to the existence of bidirectional power flow in the system. Voltage rise issue is one of the predominantly important technical issues to be addressed when DGs exist in an active distribution network. This paper presents the application of the backtracking search algorithm (BSA), which is relatively new optimisation technique to determine the optimal settings of coordinated voltage control in a distribution system. The coordinated voltage control considers power factor, on-load tap-changer and generation curtailment control to manage voltage rise issue. A multi-objective function is formulated to minimise total losses and voltage deviation in a distribution system. The proposed BSA is compared with that of particle swarm optimisation (PSO) so as to evaluate its effectiveness in determining the optimal settings of power factor, tap-changer and percentage active power generation to be curtailed. The load flow algorithm from MATPOWER is integrated in the MATLAB environment to solve the multi-objective optimisation problem. Both the BSA and PSO optimisation techniques have been tested on a radial 13-bus distribution system and the results show that the BSA performs better than PSO by providing better fitness value and convergence rate.

L’alimentation des enfants ayant une déficience neurologique

PubMed Central

2009-01-01

La malnutrition, qu’il s’agisse de sous-alimentation ou de suralimentation, est courante chez les enfants ayant une déficience neurologique. Les besoins en énergie sont difficiles à définir au sein de cette population hétérogène. De plus, on manque d’information sur ce qui constitue la croissance normale chez ces enfants. Des facteurs non nutritionnels peuvent influer sur la croissance, mais des facteurs nutritionnels, tels qu’un apport calorique insuffisant, des pertes excessives d’éléments nutritifs et un métabolisme énergétique anormal, contribuent également au retard de croissance de ces enfants. La malnutrition est liée à une importante morbidité, tandis que la réadaptation nutritionnelle améliore l’état de santé global. Le soutien nutritionnel doit faire partie intégrante de la prise en charge des enfants ayant une déficience nutritionnelle et viser non seulement à améliorer l’état nutritionnel, mais également la qualité de vie des patients et de leur famille. Au moment d’envisager une intervention nutritionnelle, il faut tenir compte du dysfonctionnement oromoteur, du reflux gastro-œsophagien et de l’aspiration pulmonaire, et une équipe multidisciplinaire doit se concerter. Il faut repérer rapidement les enfants vulnérables à des troubles nutritionnels et procéder à une évaluation de leur état nutritionnel au moins une fois par année, et plus souvent chez les nourrissons et les jeunes enfants ou chez les enfants qui risquent de souffrir de malnutrition. Il faut optimiser l’apport oral s’il est sécuritaire, mais entreprendre une alimentation entérale chez les enfants ayant un dysfonctionnement oromoteur qui provoque une aspiration marquée ou chez ceux qui sont incapables de maintenir un état nutritionnel suffisant au moyen de l’apport oral. Il faut réserver l’alimentation par sonde nasogastrique aux interventions à court terme, mais si une intervention nutritionnelle prolongée s’impose, il faut envisager la gastrostomie. Il faut réserver les mesures antireflux aux enfants présentant un reflux gastro-œsophagien considérable. Il faut surveiller étroitement la réponse du patient à l’intervention nutritionnelle afin d’éviter une prise de poids excessive après l’amorce de l’alimentation entérale, et privilégier les préparations pédiatriques afin d’éviter les carences en micronutriments. PMID:20592968

Revisiting the role of durable polymers in cardiovascular devices.

PubMed

Mori, Hiroyoshi; Otsuka, Fumiyuki; Gupta, Anuj; Jinnouchi, Hiroyuki; Torii, Sho; Harari, Emanuel; Virmani, Renu; Finn, Aloke V

2017-11-01

Polymers are an essential component of drug-eluting stents (DES) used to control drug release but remain the most controversial component of DES technology. There are two types of polymers employed in DES: durable polymer based DES (DP-DES) and biodegradable polymer DES (BP-DES). First-generation DES were exclusively composed of DP and demonstrated increased rates of late stent failure due in part to poor polymer biocompatibility. Newer generations DES use more biocompatible durable polymers or biodegradable polymers. Areas covered: We will cover issues identified with 1st-generation DP-DES, areas of success and failure in 2nd-generation DP-DES and examine the promise and shortcomings of BP-DES. Briefly, fluorinated polymers used in 2nd-generation DP-DES have excellent anti-thrombogenicity and better biocompatibility than 1st-generation DES polymers. However, these devices lead to persistent drug exposure to the endothelium which impairs endothelial function and predisposes towards neoatherosclerosis. Meanwhile, BP-DES has shortened the duration of drug exposure which might be beneficial for endothelial functional recovery leading to less neoatherosclerosis. However, it remains uncertain whether the long-term biocompatibility of bare metal surfaces is better than that of polymer-coated metals. Expert commentary: Each technology has distinct advantages, which can be optimized depending upon the particular characteristics of the patient being treated.

Fibrose kystique atypique

PubMed Central

Schram, Carrie A.

2012-01-01

Résumé Objectif Passer en revue le diagnostic des patients atteints de fibrose kystique (FK) atypique. Sources des données On a procédé à une recension exhaustive dans MEDLINE (de 1950 à la troisième semaine de mai 2009), dans MEDLINE In-Process and Other Non-Indexed Citations and Cases (de 1950 à la troisième semaine de 2009) et dans EMBASE (de 1980 à la quatrième semaine de mars 2009). On a aussi passé en revue le site web de Fibrose kystique Canada et on a consulté son plus récent rapport des inscriptions de données sur les patients. Message principal La FK atypique est une forme moins intense du trouble de la FK, qui est associée à des mutations du gène régulateur de la conductance transmembranaire de la fibrose kystique. Au lieu d’avoir les symptômes classiques, les personnes atteintes d’une FK atypique pourraient avoir une légère dysfonction d’un seul système organique et avoir ou non des concentrations de chlorure élevées dans la sueur. La FK atypique est un trouble très diversifié affectant différents systèmes organiques à divers degrés. Les symptômes du patient peuvent aussi fluctuer avec le temps; par ailleurs, certains signes et symptômes cliniques touchant les systèmes respiratoire, gastro-intestinal, endocrinien et métabolique et génito-urinaire devraient signaler aux médecins la possibilité d’une FK. Les patients atteints d’une FK atypique ont moins d’hospitalisations durant l’enfance que ceux qui ont une FK classique et le diagnostic peut passer inaperçu pendant de nombreuses années, parfois même jusqu’à l’âge adulte. Conclusion Même si les patients atteints d’une FK atypique ont une espérance de vie plus longue que les personnes atteintes de la forme classique, les issues à long terme pour de nombreuses personnes qui ont la forme atypique sont inconnues. Il est important de conseiller les patients à propos de la possibilité d’une manifestation future de la maladie. Renseigner les patients à propos de la FK peut les aider à comprendre leurs symptômes, à modifier leur mode de vie pour optimiser leur santé, à réduire l’incidence des complications et à recevoir au besoin du counseling sur la planification familiale.

Cost optimisation and minimisation of the environmental impact through life cycle analysis of the waste water treatment plant of Bree (Belgium).

PubMed

De Gussem, K; Wambecq, T; Roels, J; Fenu, A; De Gueldre, G; Van De Steene, B

2011-01-01

An ASM2da model of the full-scale waste water plant of Bree (Belgium) has been made. It showed very good correlation with reference operational data. This basic model has been extended to include an accurate calculation of environmental footprint and operational costs (energy consumption, dosing of chemicals and sludge treatment). Two optimisation strategies were compared: lowest cost meeting the effluent consent versus lowest environmental footprint. Six optimisation scenarios have been studied, namely (i) implementation of an online control system based on ammonium and nitrate sensors, (ii) implementation of a control on MLSS concentration, (iii) evaluation of internal recirculation flow, (iv) oxygen set point, (v) installation of mixing in the aeration tank, and (vi) evaluation of nitrate setpoint for post denitrification. Both an environmental impact or Life Cycle Assessment (LCA) based approach for optimisation are able to significantly lower the cost and environmental footprint. However, the LCA approach has some advantages over cost minimisation of an existing full-scale plant. LCA tends to chose control settings that are more logic: it results in a safer operation of the plant with less risks regarding the consents. It results in a better effluent at a slightly increased cost.

40 CFR Appendix B to Part 300 - National Priorities List

Code of Federal Regulations, 2011 CFR

2011-07-01

... HI Del Monte Corp. (Oahu Plantation) Honolulu County P IA Des Moines TCE Des Moines IA Electro... Peoples Natural Gas Co Dubuque IA Railroad Avenue Groundwater Contamination Des Moines IA Shaw Avenue Dump... Control, Inc Rockford IL Jennison-Wright Corporation Granite City IL Johns-Manville Corp Waukegan C IL...

40 CFR Appendix B to Part 300 - National Priorities List

Code of Federal Regulations, 2014 CFR

2014-07-01

... Ordot Landfill Guam S HI Del Monte Corp. (Oahu Plantation) Honolulu County P IA Des Moines TCE Des... Kellogg IA Peoples Natural Gas Co Dubuque IA Railroad Avenue Groundwater Contamination Des Moines IA Shaw... Danville IL Indian Refinery—Texaco Lawrenceville Lawrenceville IL Interstate Pollution Control, Inc...

Disease activity-guided dose optimisation of adalimumab and etanercept is a cost-effective strategy compared with non-tapering tight control rheumatoid arthritis care: analyses of the DRESS study.

PubMed

Kievit, Wietske; van Herwaarden, Noortje; van den Hoogen, Frank Hj; van Vollenhoven, Ronald F; Bijlsma, Johannes Wj; van den Bemt, Bart Jf; van der Maas, Aatke; den Broeder, Alfons A

2016-11-01

A disease activity-guided dose optimisation strategy of adalimumab or etanercept (TNFi (tumour necrosis factor inhibitors)) has shown to be non-inferior in maintaining disease control in patients with rheumatoid arthritis (RA) compared with usual care. However, the cost-effectiveness of this strategy is still unknown. This is a preplanned cost-effectiveness analysis of the Dose REduction Strategy of Subcutaneous TNF inhibitors (DRESS) study, a randomised controlled, open-label, non-inferiority trial performed in two Dutch rheumatology outpatient clinics. Patients with low disease activity using TNF inhibitors were included. Total healthcare costs were measured and quality adjusted life years (QALY) were based on EQ5D utility scores. Decremental cost-effectiveness analyses were performed using bootstrap analyses; incremental net monetary benefit (iNMB) was used to express cost-effectiveness. 180 patients were included, and 121 were allocated to the dose optimisation strategy and 59 to control. The dose optimisation strategy resulted in a mean cost saving of -€12 280 (95 percentile -€10 502; -€14 104) per patient per 18 months. There is an 84% chance that the dose optimisation strategy results in a QALY loss with a mean QALY loss of -0.02 (-0.07 to 0.02). The decremental cost-effectiveness ratio (DCER) was €390 493 (€5 085 184; dominant) of savings per QALY lost. The mean iNMB was €10 467 (€6553-€14 037). Sensitivity analyses using 30% and 50% lower prices for TNFi remained cost-effective. Disease activity-guided dose optimisation of TNFi results in considerable cost savings while no relevant loss of quality of life was observed. When the minimal QALY loss is compensated with the upper limit of what society is willing to pay or accept in the Netherlands, the net savings are still high. NTR3216; Post-results. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Optimisation of strain selection in evolutionary continuous culture

NASA Astrophysics Data System (ADS)

Bayen, T.; Mairet, F.

2017-12-01

In this work, we study a minimal time control problem for a perfectly mixed continuous culture with n ≥ 2 species and one limiting resource. The model that we consider includes a mutation factor for the microorganisms. Our aim is to provide optimal feedback control laws to optimise the selection of the species of interest. Thanks to Pontryagin's Principle, we derive optimality conditions on optimal controls and introduce a sub-optimal control law based on a most rapid approach to a singular arc that depends on the initial condition. Using adaptive dynamics theory, we also study a simplified version of this model which allows to introduce a near optimal strategy.

Effect of preventive (beta blocker) treatment, behavioural migraine management, or their combination on outcomes of optimised acute treatment in frequent migraine: randomised controlled trial.

PubMed

Holroyd, Kenneth A; Cottrell, Constance K; O'Donnell, Francis J; Cordingley, Gary E; Drew, Jana B; Carlson, Bruce W; Himawan, Lina

2010-09-29

To determine if the addition of preventive drug treatment (β blocker), brief behavioural migraine management, or their combination improves the outcome of optimised acute treatment in the management of frequent migraine. Randomised placebo controlled trial over 16 months from July 2001 to November 2005. Two outpatient sites in Ohio, USA. 232 adults (mean age 38 years; 79% female) with diagnosis of migraine with or without aura according to International Headache Society classification of headache disorders criteria, who recorded at least three migraines with disability per 30 days (mean 5.5 migraines/30 days), during an optimised run-in of acute treatment. Addition of one of four preventive treatments to optimised acute treatment: β blocker (n=53), matched placebo (n=55), behavioural migraine management plus placebo (n=55), or behavioural migraine management plus β blocker (n=69). The primary outcome was change in migraines/30 days; secondary outcomes included change in migraine days/30 days and change in migraine specific quality of life scores. Mixed model analysis showed statistically significant (P≤0.05) differences in outcomes among the four added treatments for both the primary outcome (migraines/30 days) and the two secondary outcomes (change in migraine days/30 days and change in migraine specific quality of life scores). The addition of combined β blocker and behavioural migraine management (-3.3 migraines/30 days, 95% confidence interval -3.2 to -3.5), but not the addition of β blocker alone (-2.1 migraines/30 days, -1.9 to -2.2) or behavioural migraine management alone (-2.2 migraines migraines/30 days, -2.0 to -2.4), improved outcomes compared with optimised acute treatment alone (-2.1 migraines/30 days, -1.9 to -2.2). For a clinically significant (≥50% reduction) in migraines/30 days, the number needed to treat for optimised acute treatment plus combined β blocker and behavioural migraine management was 3.1 compared with optimised acute treatment alone, 2.6 compared with optimised acute treatment plus β blocker, and 3.1 compared with optimised acute treatment plus behavioural migraine management. Results were consistent for the two secondary outcomes, and at both month 10 (the primary endpoint) and month 16. The addition of combined β blocker plus behavioural migraine management, but not the addition of β blocker alone or behavioural migraine management alone, improved outcomes of optimised acute treatment. Combined β blocker treatment and behavioural migraine management may improve outcomes in the treatment of frequent migraine. Clinical trials NCT00910689.

Multiobjective optimisation of bogie suspension to boost speed on curves

NASA Astrophysics Data System (ADS)

Milad Mousavi-Bideleh, Seyed; Berbyuk, Viktor

2016-01-01

To improve safety and maximum admissible speed on different operational scenarios, multiobjective optimisation of bogie suspension components of a one-car railway vehicle model is considered. The vehicle model has 50 degrees of freedom and is developed in multibody dynamics software SIMPACK. Track shift force, running stability, and risk of derailment are selected as safety objective functions. The improved maximum admissible speeds of the vehicle on curves are determined based on the track plane accelerations up to 1.5 m/s2. To attenuate the number of design parameters for optimisation and improve the computational efficiency, a global sensitivity analysis is accomplished using the multiplicative dimensional reduction method (M-DRM). A multistep optimisation routine based on genetic algorithm (GA) and MATLAB/SIMPACK co-simulation is executed at three levels. The bogie conventional secondary and primary suspension components are chosen as the design parameters in the first two steps, respectively. In the last step semi-active suspension is in focus. The input electrical current to magnetorheological yaw dampers is optimised to guarantee an appropriate safety level. Semi-active controllers are also applied and the respective effects on bogie dynamics are explored. The safety Pareto optimised results are compared with those associated with in-service values. The global sensitivity analysis and multistep approach significantly reduced the number of design parameters and improved the computational efficiency of the optimisation. Furthermore, using the optimised values of design parameters give the possibility to run the vehicle up to 13% faster on curves while a satisfactory safety level is guaranteed. The results obtained can be used in Pareto optimisation and active bogie suspension design problems.

Dissociative experiences in patients with epilepsy.

PubMed

Özdemir, Osman; Cilingir, Vedat; Özdemir, Pınar Güzel; Milanlioglu, Aysel; Hamamci, Mehmet; Yilmaz, Ekrem

2016-03-01

A few studies have explored dissociative experiences in epilepsy patients. We investigated dissociative experiences in patients with epilepsy using the dissociative experiences scale (DES). Ninety-eight patients with epilepsy and sixty healthy controls were enrolled in this study. A sociodemographic questionnaire and the Dissociative Experiences Scale (DES), Beck Depression Inventory (BDI) and Beck Anxiety Inventory (BAI) were administered to the participants. The DES scores were significantly higher for the patients with epilepsy than the healthy individuals. The number of individuals with pathological dissociation (DES ≥ 30) was higher in the epilepsy group (n = 28) than in the control group (n = 8). Also, higher levels of dissociation were significantly associated with frequency of seizures, but were not associated with duration of epilepsy and age at onset of the disorder. These findings demonstrate that patients with epilepsy are more prone to dissociation than controls. The high rate of dissociative experiences among patients with epilepsy suggest that some epilepsy-related factors are present.

40 CFR Appendix B to Part 300 - National Priorities List

Code of Federal Regulations, 2013 CFR

2013-07-01

... County P IA Des Moines TCE Des Moines IA Electro-Coatings, Inc Cedar Rapids IA Fairfield Coal... Groundwater Contamination Des Moines IA Shaw Avenue Dump Charles City IA Vogel Paint & Wax Co Orange City ID... Lawrenceville IL Interstate Pollution Control, Inc Rockford IL Jennison-Wright Corporation Granite City IL Johns...

75 FR 33333 - Prohibited Transaction Exemptions 2010-16, 2010-17, and 2010-18; Grant of Individual Exemptions...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-11

... Australian Stock Exchange Limited in Australia; (vii) the Commission Bancaire (``CB''), the Comite des Establissements de Credit et des Enterprises d'Investissement (CECEI) and the Autorite des Marches Financiers... has or exercises discretionary authority or control with respect to the investment of the assets of...

40 CFR Appendix B to Part 300 - National Priorities List

Code of Federal Regulations, 2012 CFR

2012-07-01

... Des Moines TCE Des Moines IA Electro-Coatings, Inc Cedar Rapids IA Fairfield Coal Gasification Plant... Contamination Des Moines IA Shaw Avenue Dump Charles City IA Vogel Paint & Wax Co Orange City C ID Bunker Hill... Control, Inc Rockford IL Jennison-Wright Corporation Granite City IL Johns-Manville Corp Waukegan C IL...

Developpement des betons semi autoplacants a rheologie adaptee pour des infrastructures

NASA Astrophysics Data System (ADS)

Sotomayor Cruz, Cristian Daniel

Au cours des dernières décennies, les infrastructures canadiennes et québécoises comportent plusieurs structures en béton armé présentant des problèmes de durabilité dus aux conditions climatiques sévères, à la mauvaise conception des structures, à la qualité des matériaux, aux types des bétons choisis, aux systèmes de construction ou à l'existence d'événements incontrôlables. En ce qui concerne le choix du béton pour la construction des infrastructures, une vaste gamme de béton divisée en deux principaux types peut être utilisée: le béton conventionnel vibré (BCV) et le béton autoplaçant (BAP). Dans le cas d'un BCV, la consolidation inadéquate par vibration a été un problème récurrent, occasionnant des dommages structuraux. Ceci a conduit à une réduction de la durabilité et à une augmentation du coût d'entretien et de réparation des infrastructures. Rien que l'utilisation d'un BAP a des avantages tels que l'élimination de la vibration, la réduction des coûts de main d'oeuvre et l'amélioration de la qualité des structures, néanmoins, le coût initial d'un BAP par rapport à un BCV ne permet pas encore de généraliser son utilisation dans l'industrie de la construction. Ce mémoire présente la conception d'une nouvelle gamme de béton semi-autoplaçant pour la construction des infrastructures (BSAP-I) exigeant une vibration minimale. Il s'agit de trouver un équilibre optimal entre la rhéologie et le coût initial du nouveau béton pour conférer une bonne performance structurale et économique aux structures. Le programme expérimental établi a premièrement permis d'évaluer la faisabilité d'utilisation des BSAP-I pour la mise en place des piliers d'une infrastructure de pont à Sherbrooke. En plus, l'utilisation d'un plan d'expériences a permis l'évaluation de trois paramètres de formulation sur les propriétés des mélanges de BSAP-I à l'état frais et durci. Finalement, l'évaluation de la performance des BSAP-I optimisés à travers une caractérisation complète des propriétés mécaniques et de la durabilité a été réalisée. A la suite de cette étude, les résultats obtenus nous permettent de conclure que : (1) L'utilisation d'un BSAP-I avec un gros granulat de 5 - 14 mm, des rapports E/L = 0,37 et S/G = 0,52 et une teneur en air de 6 à 9% a été possible en conférant un équilibre optimal fluidité / stabilité à l'état frais, ainsi qu'un niveau de thixotropie adéquate au chantier permettant d'optimiser la conception du coffrage des piliers de pont et de conférer des qualités de surfaces très acceptables de ces infrastructures. (2) La méthode adaptée pour l'essai L-Box contenant 2 barres et une vibration de 5 secondes a permis de bien caractériser la capacité de remplissage d'un BSAP-I. (3) L'utilisation d'un plan factoriel 23 a permis d'obtenir des modèles statistiques fiables, capables de prédire les propriétés rhéologiques à l'état frais et les résistances en compression des BSAP-I avec des dosages en liant entre 370 et 420 kg/m3, des rapports E/L entre 0,34 et 0,40 et S/G entre 0,47 et 0,53. (4) Des mesures de vitesse d'écoulement T40 d'un BSAP-I sont très semblables à celles d'un BAP. En plus, des valeurs T40 montrent une bonne corrélation linéaire avec celles de T400 mesurés dans la boîte L-Box. (5) À la frontière du BAP et du BCV, une bande rhéologique possédant un τ0 entre 30 et 320 Pa et un η entre 10 et 140 Pa.s a été trouvée pour la conception optimale des BSAP-I. (6) Les BSAP-I optimisés ont également conféré une très bonne performance à l'état frais, en permettant maintenir un bon équilibre entre la rhéologie et la stabilité dans le temps, lorsqu'on utilise une énergie de vibration minimale pour amorcer son écoulement. (7) À l'état durci Les BSAP-I ont conféré une bonne performance présentant des résistances mécaniques élevées et des niveaux négligeables de pénétration aux ions chlores, de perte de masse par écaillage et des attaques par le gel/dégel. (8) L'utilisation des ciments combinés possédant de la fumée de silice, du laitier et de la cendre volante ont permis améliorer le comportement rhéologique et minimiser le retrait par séchage des BSAP-I dans le temps. Mots-clés : Béton autoplaçant (BAP), capacité de remplissage, pression hydrostatique, rhéologie, seuil de cisaillement, thixotropie, maniabilité.

Etude analytique du fonctionnement des moteurs à réluctance alimentés à fréquence variable

NASA Astrophysics Data System (ADS)

Sargos, F. M.; Gudefin, E. J.; Zaskalicky, P.

1995-03-01

In switched reluctance motors fed by a constant voltage source (like a battery) at high frequencies, the current becomes unpredictable and often cannot reach a given reference value, because of the variation of the inductances with the rotor position ; the “motional” m.m.f. generates commutation troubles which increase with the frequency. An optimal control as well as an approximate design of the motor require a quick and simple calculation of currents, powers and losses ; now, in principle, the non-linear electrical equation needs a numerical resolution, whose results cannot be extrapolated. By linearizing this equation by intervals, the method proposed here allows to express analytically, in any case, the phase currents, the torque and the copper losses, when the feeding voltage itself is constant by intervals. The model neglects saturation, but a simple adjustment of the inductance (chosen ad libitum) allows to deal with it. The calculation is immediate and perfectly accurate as long as the machine parameters themselves are well defined. Some results are given as examples for two usual feeding modes. Dans les machines à réluctance alimentées à haute fréquence par une source à tension constante, comme une batterie, le courant varie de manière difficilement prévisible, à cause de la variation des inductances avec la position du rotor, et souvent ne parvient pas à s'établir à une valeur de consigne imposée ; la f.é.m. “motionnelle” engendre des difficultés de communication qui s'aggravent avec l'augmentation de fréquence jusqu'à empêcher le fonctionnement. Tant pour optimiser la commande que pour dimensionner approximativement un moteur ; on doit pouvoir calculer simplement et rapidement le courant et la puissance ; or l'équation électrique, non linéaire, doit en principe être résolue numériquement et les résultats ne sont pratiquement pas extrapolables. En linéarisant par intervalles cette équation, la méthode proposée ici permer d'exprimer analytiquement et dans tous les cas les courants de phase, la puissance fournie et les pertes Joule, lorsque la tension aux bornes de l'enroulement est constante par morceaux. Le modèle utilisé néglige la saturation ; mais il est possible de tenir compte de celle-ci par des ajustements, facilement calculables, de la courbe d'inductance, quelle que soit son allure. Les calculs sont immédiats et parfaitement précis pour autant que les paramètres soient bien définis. Quelques résultats sont donnés à titre d'exemple, pour deux modes d'alimentation usuels.

Economic impact of optimising antiretroviral treatment in human immunodeficiency virus-infected adults with suppressed viral load in Spain, by implementing the grade A-1 evidence recommendations of the 2015 GESIDA/National AIDS Plan.

PubMed

Ribera, Esteban; Martínez-Sesmero, José Manuel; Sánchez-Rubio, Javier; Rubio, Rafael; Pasquau, Juan; Poveda, José Luis; Pérez-Mitru, Alejandro; Roldán, Celia; Hernández-Novoa, Beatriz

2018-03-01

The objective of this study is to estimate the economic impact associated with the optimisation of triple antiretroviral treatment (ART) in patients with undetectable viral load according to the recommendations from the GeSIDA/PNS (2015) Consensus and their applicability in the Spanish clinical practice. A pharmacoeconomic model was developed based on data from a National Hospital Prescription Survey on ART (2014) and the A-I evidence recommendations for the optimisation of ART from the GeSIDA/PNS (2015) consensus. The optimisation model took into account the willingness to optimise a particular regimen and other assumptions, and the results were validated by an expert panel in HIV infection (Infectious Disease Specialists and Hospital Pharmacists). The analysis was conducted from the NHS perspective, considering the annual wholesale price and accounting for deductions stated in the RD-Law 8/2010 and the VAT. The expert panel selected six optimisation strategies, and estimated that 10,863 (13.4%) of the 80,859 patients in Spain currently on triple ART, would be candidates to optimise their ART, leading to savings of €15.9M/year (2.4% of total triple ART drug cost). The most feasible strategies (>40% of patients candidates for optimisation, n=4,556) would be optimisations to ATV/r+3TC therapy. These would produce savings between €653 and €4,797 per patient per year depending on baseline triple ART. Implementation of the main optimisation strategies recommended in the GeSIDA/PNS (2015) Consensus into Spanish clinical practice would lead to considerable savings, especially those based in dual therapy with ATV/r+3TC, thus contributing to the control of pharmaceutical expenditure and NHS sustainability. Copyright © 2016 Elsevier España, S.L.U. and Sociedad Española de Enfermedades Infecciosas y Microbiología Clínica. All rights reserved.

Contribution a l'etude et au developpement de nouvelles poudres de fonte

NASA Astrophysics Data System (ADS)

Boisvert, Mathieu

L'obtention de graphite libre dans des pieces fabriquees par metallurgie des poudres (M/P) est un defi auquel plusieurs chercheurs se sont attardes. En effet, la presence de graphite apres frittage ameliore l'usinabilite des pieces, permettant donc de reduire les couts de production, et peut aussi engendrer une amelioration des proprietes tribologiques. L'approche utilisee dans cette these pour tenter d'obtenir du graphite libre apres frittage est par l'utilisation de nouvelles poudres de fontes atomisees a l'eau. L'atomisation a l'eau etant un procede de production de poudres relativement peu couteux qui permet de grandes capacites de production, le transfert des decouvertes de ce doctorat vers des applications industrielles sera donc economiquement plus favorable. En plus de l'objectif d'obtenir du graphite libre apres frittage, un autre aspect important des travaux est le controle de la morphologie du graphite libre apres frittage. En effet, il est connu dans la litterature des fontes coulees/moulees que la morphologie du graphite influencera les proprietes des fontes, ce qui est aussi vrai pour les pieces de M/P. Les fontes ductiles, pour lesquelles le graphite est sous forme de nodules spheroidaux isoles les uns des autres, possedent des proprietes mecaniques superieures aux fontes grises pour lesquelles le graphite est sous forme lamellaire et continu dans la matrice. Les resultats presentes dans cette these montrent qu'il est possible, dans des melanges contenant des poudres de fontes, d'avoir un controle sur la morphologie du graphite et donc sur les proprietes des pieces. Le controle de la morphologie du graphite a principalement ete realise par le type de frittage et le phenomene de diffusion " uphill " du carbone cause par des gradients en silicium. En effet, pour les frittages en phase solide, tous les nodules de graphite sont presents a l'interieur des grains de poudre apres frittage. Pour les frittages en phase liquide, l'intensite de la diffusion " uphill " permet de conserver plus ou moins de graphite nodulaire a l'interieur des regions riches en silicium, alors que le reste du graphite precipite sous forme lamellaire/vermiculaire dans les regions interparticulaires. L'etude des poudres de fontes et la recherche des mecanismes regissant la morphologie du graphite dans les fontes coulees/moulees nous ont amenes a produire des poudres de fontes traitees au magnesium avant l'atomisation. Plusieurs resultats fondamentaux ont ete obtenus de la caracterisation des poudres traitees au magnesium et de leur comparaison avec des poudres de chimies similaires non traitees au magnesium. D'abord, il a ete possible d'observer des bifilms d'oxyde de silicium dans la structure du graphite primaire d'une poudre de fonte grise hypereutectique. Il s'agit des premieres images montrant la structure double de ces defauts, venant ainsi appuyer la theorie elaboree par le professeur John Campbell. Ensuite, il a ete montre que le traitement au magnesium forme une atmosphere protectrice gazeuse autogeneree qui empeche l'oxydation de la surface du bain liquide et donc, la formation et l'entrainement des bifilms. Le role du magnesium sur la morphologie du graphite est de diminuer le soufre en solution en formant des precipites de sulfure de magnesium et ainsi d'augmenter l'energie d'interface graphite-liquide. En reponse a cette grande energie d'interface graphite-liquide, le graphite cherche a minimiser son ratio surface/volume, ce qui favorise la formation de graphite spheroidal. De plus, deux types de germination ont ete observes dans la poudre de fonte hypereutectique traitee au magnesium. Le premier type est une germination heterogene sur un nombre limite de particules faites de magnesium, d'aluminium, de silicium et d'oxygene. Le deuxieme type est une germination homogene des nodules dans certaines regions du liquide plus riches en silicium. L'observation du centre reel tridimensionnel, en microscopie electronique en transmission en haute resolution, d'un des nodules ayant subi une germination homogene a permis de confirmer que le mode de croissance du graphite spheroidal se produit selon le modele de la croissance en feuille de chou. (Abstract shortened by ProQuest.).

76 FR 78657 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-19

... Garst Revocable Trust, Des Moines, Iowa; Sarah Garst, West Des Moines, Iowa; as a group acting in... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C...

Inhibition of DES-induced DNA adducts by diallyl sulfide: implications in liver cancer prevention.

PubMed

Green, Mario; Thomas, Ronald; Gued, Lisa; Sadrud-Din, Sakeenah

2003-01-01

Diethylstilbesterol (DES) is known to cause cancer in humans and animals. Diallyl sulfide (DAS), a component of garlic, has been shown to prevent various types of cancer, presumably via metabolic modulation. Previously, we have demonstrated that DAS prevents the oxidation and reduction of DES in vitro. We hypothesize that DAS will inhibit the metabolism of DES in vivo thus preventing the formation of DES-induced DNA adducts. To test this hypothesis, five groups of five male Sprague-Dawley rats were treated as follows: the control received 0.5 ml of corn oil daily for four days. The second group received 50 mg/kg DAS daily for four days. The third group received 50 mg/kg DAS daily for four days followed by 150 mg/kg DES on day five. The fourth group received 400 mg/kg DAS on day five followed by 150 mg/kg DES. The fifth group received 150 mg/kg DES on day five. All of the rats were sacrificed on day five, 4 h after DES treatment. DNA was isolated from the liver and analyzed by 32P-post-labeling for DNA adducts. The in vitro study was performed utilizing four reactions described as follows: the control reaction contained 200 microg DNA, microsomes (346 microg protein/ml), and 10 mM DES; no oxidation co-factor (cumen hydroperoxide) was added. The second reaction, a complete oxidation system, contained 200 microg DNA, microsomes (346 microg protein/ml), 30 mM cumen hydroperoxide, and 10 mM DES. The third reaction contained 200 microg DNA, microsomes (346 microg protein/ml), 30 mM cumen hydroperoxide, 50 mM DAS, and 10 mM DES. The fourth reaction contained 200 microg DNA, microsomes (346 microg protein/ml), 30 mM cumen hydroperoxide, 100 mM DAS, and 10 mM DES. All of the in vitro reactions were buffered with 100 mM KPO4 pH 7.4 and incubated for 30 min at 37 degrees C. DNA was extracted and analyzed by 32P-post-labeling. We found that DAS inhibited the formation of DES-induced DNA adducts in a dose-dependent fashion. We have shown that DES-induced DNA adducts were inhibited in rats that received DAS pre-treatment and co-treatment with DES. These results suggest that DAS directly inhibits the metabolism of DES thus preventing the formation of DNA adducts. In addition to directly inhibiting the metabolism of DES, DAS appears to alter the expression of the metabolic machinery such that DES-induced adducts are inhibited. The inhibition of DES-induced DNA adducts by DAS may prevent the initiation of estrogen-induced cancer.

Radiation dose optimisation for conventional imaging in infants and newborns using automatic dose management software: an application of the new 2013/59 EURATOM directive.

PubMed

Alejo, L; Corredoira, E; Sánchez-Muñoz, F; Huerga, C; Aza, Z; Plaza-Núñez, R; Serrada, A; Bret-Zurita, M; Parrón, M; Prieto-Areyano, C; Garzón-Moll, G; Madero, R; Guibelalde, E

2018-04-09

Objective: The new 2013/59 EURATOM Directive (ED) demands dosimetric optimisation procedures without undue delay. The aim of this study was to optimise paediatric conventional radiology examinations applying the ED without compromising the clinical diagnosis. Automatic dose management software (ADMS) was used to analyse 2678 studies of children from birth to 5 years of age, obtaining local diagnostic reference levels (DRLs) in terms of entrance surface air kerma. Given local DRL for infants and chest examinations exceeded the European Commission (EC) DRL, an optimisation was performed decreasing the kVp and applying the automatic control exposure. To assess the image quality, an analysis of high-contrast resolution (HCSR), signal-to-noise ratio (SNR) and figure of merit (FOM) was performed, as well as a blind test based on the generalised estimating equations method. For newborns and chest examinations, the local DRL exceeded the EC DRL by 113%. After the optimisation, a reduction of 54% was obtained. No significant differences were found in the image quality blind test. A decrease in SNR (-37%) and HCSR (-68%), and an increase in FOM (42%), was observed. ADMS allows the fast calculation of local DRLs and the performance of optimisation procedures in babies without delay. However, physical and clinical analyses of image quality remain to be needed to ensure the diagnostic integrity after the optimisation process. Advances in knowledge: ADMS are useful to detect radiation protection problems and to perform optimisation procedures in paediatric conventional imaging without undue delay, as ED requires.

Prenatal Estrogens and the Development of Homosexual Orientation.

ERIC Educational Resources Information Center

Meyer-Bahlburg, Heino F. L.; And Others

1995-01-01

Examines the hypothesis that prenatal estrogens contribute to the development of human sexual orientation. Several groups of women with a history of prenatal exposure to diethylstilbestrol (DES) were compared with several samples of control women. Findings showed that more DES-exposed women than controls were rated as bisexual or homosexual,…

Optimal control of LQR for discrete time-varying systems with input delays

NASA Astrophysics Data System (ADS)

Yin, Yue-Zhu; Yang, Zhong-Lian; Yin, Zhi-Xiang; Xu, Feng

2018-04-01

In this work, we consider the optimal control problem of linear quadratic regulation for discrete time-variant systems with single input and multiple input delays. An innovative and simple method to derive the optimal controller is given. The studied problem is first equivalently converted into a problem subject to a constraint condition. Last, with the established duality, the problem is transformed into a static mathematical optimisation problem without input delays. The optimal control input solution to minimise performance index function is derived by solving this optimisation problem with two methods. A numerical simulation example is carried out and its results show that our two approaches are both feasible and very effective.

Optimal control of Formula One car energy recovery systems

NASA Astrophysics Data System (ADS)

Limebeer, D. J. N.; Perantoni, G.; Rao, A. V.

2014-10-01

The utility of orthogonal collocation methods in the solution of optimal control problems relating to Formula One racing is demonstrated. These methods can be used to optimise driver controls such as the steering, braking and throttle usage, and to optimise vehicle parameters such as the aerodynamic down force and mass distributions. Of particular interest is the optimal usage of energy recovery systems (ERSs). Contemporary kinetic energy recovery systems are studied and compared with future hybrid kinetic and thermal/heat ERSs known as ERS-K and ERS-H, respectively. It is demonstrated that these systems, when properly controlled, can produce contemporary lap time using approximately two-thirds of the fuel required by earlier generation (2013 and prior) vehicles.

Estimation of Power Consumption in the Circular Sawing of Stone Based on Tangential Force Distribution

NASA Astrophysics Data System (ADS)

Huang, Guoqin; Zhang, Meiqin; Huang, Hui; Guo, Hua; Xu, Xipeng

2018-04-01

Circular sawing is an important method for the processing of natural stone. The ability to predict sawing power is important in the optimisation, monitoring and control of the sawing process. In this paper, a predictive model (PFD) of sawing power, which is based on the tangential force distribution at the sawing contact zone, was proposed, experimentally validated and modified. With regard to the influence of sawing speed on tangential force distribution, the modified PFD (MPFD) performed with high predictive accuracy across a wide range of sawing parameters, including sawing speed. The mean maximum absolute error rate was within 6.78%, and the maximum absolute error rate was within 11.7%. The practicability of predicting sawing power by the MPFD with few initial experimental samples was proved in case studies. On the premise of high sample measurement accuracy, only two samples are required for a fixed sawing speed. The feasibility of applying the MPFD to optimise sawing parameters while lowering the energy consumption of the sawing system was validated. The case study shows that energy use was reduced 28% by optimising the sawing parameters. The MPFD model can be used to predict sawing power, optimise sawing parameters and control energy.

Systeme microfluidique d'analyse sanguine en temps reel pour l'imagerie moleculaire chez le petit animal

NASA Astrophysics Data System (ADS)

Convert, Laurence

De nouveaux radiotraceurs sont continuellement développés pour améliorer l'efficacité diagnostique en imagerie moléculaire, principalement en tomographie d'émission par positrons (TEP) et en tomographie d'émission monophotonique (TEM) dans les domaines de l'oncologie, de la cardiologie et de la neurologie. Avant de pouvoir être utilisés chez les humains, ces radiotraceurs doivent être caractérisés chez les petits animaux, principalement les rats et les souris. Pour cela, de nombreux échantillons sanguins doivent être prélevés et analysés (mesure de radioactivité, séparation de plasma, séparation d'espèces chimiques), ce qui représente un défi majeur chez les rongeurs à cause de leur très faible volume sanguin (˜1,4 ml pour une souris). Des solutions fournissant une analyse partielle sont présentées dans la littérature, mais aucune ne permet d'effectuer toutes les opérations dans un même système. Les présents travaux de recherche s'insèrent dans le contexte global d'un projet visant à développer un système microfluidique d'analyse sanguine complète en temps réel pour la caractérisation des nouveaux radiotraceurs TEP et TEM. Un cahier des charges a tout d'abord été établi et a permis de fixer des critères quantitatifs et qualitatifs à respecter pour chacune des fonctions de la puce. La fonction de détection microfluidique a ensuite été développée. Un état de l'art des travaux ayant déjà combiné la microfluidique et la détection de radioactivité a permis de souligner qu'aucune solution existante ne répondait aux critères du projet. Parmi les différentes technologies disponibles, des microcanaux en résine KMPR fabriqués sur des détecteurs semiconducteurs de type p-i-n ont été identifiés comme une solution technologique pour le projet. Des détecteurs p-i-n ont ensuite été fabriqués en utilisant un procédé standard. Les performances encourageantes obtenues ont mené à initier un projet de maîtrise pour leur optimisation. En parallèle, les travaux ont été poursuivis avec des détecteurs du commerce sous forme de gaufres non découpées. Un premier dispositif intégrant des canaux en KMPR sur ces gaufres a permis de valider le concept démontrant le grand potentiel de ces choix technologiques et incitant à poursuivre les développements dans cette voie, notamment en envisageant des expériences animales. L'utilisation prolongée des canaux avec du sang non dilué est cependant particulièrement exigeante pour les matériaux artificiels. Une passivation à l'albumine a permis d'augmenter considérablement la compatibilité sanguine de la résine KMPR. Le concept initial, incluant la passivation des canaux, a ensuite été optimisé et intégré dans un système de mesure complet avec toute l'électronique et l'informatique de contrôle. Le système final a été validé chez le petit animal avec un radiotraceur connu. Ces travaux ont donné lieu à la première démonstration d'un détecteur microfluidique de haute efficacité pour la TEP et la TEM. Cette première brique d'un projet plus global est déjà un outil innovant en soi qui permettra d'augmenter l'efficacité du développement d'outils diagnostiques plus spécifiques principalement pour l'oncologie, la cardiologie et la neurologie. Mots clefs : imagerie moléculaire, tomographie d'émission par positrons (TEP), tomographie d'émission monophotonique (TEM), microfluidique, détecteur de radioactivité, KMPR, diodes p-i-n, hémocompatibilité.

DES Science Portal: II- Creating Science-Ready Catalogs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fausti Neto, Angelo; et al.

We present a novel approach for creating science-ready catalogs through a software infrastructure developed for the Dark Energy Survey (DES). We integrate the data products released by the DES Data Management and additional products created by the DES collaboration in an environment known as DES Science Portal. Each step involved in the creation of a science-ready catalog is recorded in a relational database and can be recovered at any time. We describe how the DES Science Portal automates the creation and characterization of lightweight catalogs for DES Year 1 Annual Release, and show its flexibility in creating multiple catalogs withmore » different inputs and configurations. Finally, we discuss the advantages of this infrastructure for large surveys such as DES and the Large Synoptic Survey Telescope. The capability of creating science-ready catalogs efficiently and with full control of the inputs and configurations used is an important asset for supporting science analysis using data from large astronomical surveys.« less

Optimisation of confinement in a fusion reactor using a nonlinear turbulence model

NASA Astrophysics Data System (ADS)

Highcock, E. G.; Mandell, N. R.; Barnes, M.

2018-04-01

The confinement of heat in the core of a magnetic fusion reactor is optimised using a multidimensional optimisation algorithm. For the first time in such a study, the loss of heat due to turbulence is modelled at every stage using first-principles nonlinear simulations which accurately capture the turbulent cascade and large-scale zonal flows. The simulations utilise a novel approach, with gyrofluid treatment of the small-scale drift waves and gyrokinetic treatment of the large-scale zonal flows. A simple near-circular equilibrium with standard parameters is chosen as the initial condition. The figure of merit, fusion power per unit volume, is calculated, and then two control parameters, the elongation and triangularity of the outer flux surface, are varied, with the algorithm seeking to optimise the chosen figure of merit. A twofold increase in the plasma power per unit volume is achieved by moving to higher elongation and strongly negative triangularity.

Improving target coverage and organ-at-risk sparing in intensity-modulated radiotherapy for cervical oesophageal cancer using a simple optimisation method.

PubMed

Lu, Jia-Yang; Cheung, Michael Lok-Man; Huang, Bao-Tian; Wu, Li-Li; Xie, Wen-Jia; Chen, Zhi-Jian; Li, De-Rui; Xie, Liang-Xi

2015-01-01

To assess the performance of a simple optimisation method for improving target coverage and organ-at-risk (OAR) sparing in intensity-modulated radiotherapy (IMRT) for cervical oesophageal cancer. For 20 selected patients, clinically acceptable original IMRT plans (Original plans) were created, and two optimisation methods were adopted to improve the plans: 1) a base dose function (BDF)-based method, in which the treatment plans were re-optimised based on the original plans, and 2) a dose-controlling structure (DCS)-based method, in which the original plans were re-optimised by assigning additional constraints for hot and cold spots. The Original, BDF-based and DCS-based plans were compared with regard to target dose homogeneity, conformity, OAR sparing, planning time and monitor units (MUs). Dosimetric verifications were performed and delivery times were recorded for the BDF-based and DCS-based plans. The BDF-based plans provided significantly superior dose homogeneity and conformity compared with both the DCS-based and Original plans. The BDF-based method further reduced the doses delivered to the OARs by approximately 1-3%. The re-optimisation time was reduced by approximately 28%, but the MUs and delivery time were slightly increased. All verification tests were passed and no significant differences were found. The BDF-based method for the optimisation of IMRT for cervical oesophageal cancer can achieve significantly better dose distributions with better planning efficiency at the expense of slightly more MUs.

Approches pour la reduction de l'impact de defaut dans le transport d'energie du parc eolien offshore via VSC-HVDC =

NASA Astrophysics Data System (ADS)

Benadja, Mounir

Dans ce travail est presente un systeme de generation d'energie d'un parc eolien offshore et un systeme de transport utilisant les stations VSC-HVDC connectees au reseau principal AC onshore. Trois configurations ont ete etudiees, modelisees et validees par simulation. Dans chacune des configurations, des contributions ameliorant les cotes techniques et economiques sont decrites ci-dessous : La premiere contribution concerne un nouvel algorithme MPPT (Maximum Power Point Tracking) utilise pour l'extraction de la puissance maximale disponible dans les eoliennes des parcs offshores. Cette technique d'extraction du MPPT ameliore le rendement energetique de la chaine de conversion des energies renouvelables notamment l'energie eolienne a petite et a grande echelles (parc eolien offshore) qui constitue un probleme pour les constructeurs qui se trouvent confrontes a developper des dispositifs MPPT simples, moins couteux, robustes, fiables et capable d'obtenir un rendement energetique maximal. La deuxieme contribution concerne la reduction de la taille, du cout et de l'impact des defauts electriques (AC et DC) dans le systeme construit pour transporter l'energie d'un parc eolien offshore (OWF) vers le reseau principal AC onshore via deux stations 3L-NPC VSCHVDC. La solution developpee utilise des observateurs non-lineaires bases sur le filtre de Kalman etendu (EKF). Ce filtre permet d'estimer la vitesse de rotation et la position du rotor de chacune des generatrices du parc eolien offshore et de la tension du bus DC de l'onduleur DC-AC offshore et des deux stations 3L-NPC-VSC-HVDC (offshore et onshore). De plus, ce developpement du filtre de Kalman etendu a permis de reduire l'impact des defauts AC et DC. Deux commandes ont ete utilisees, l'une (commande indirect dans le plan abc) avec EKF integre destinee pour controler le convertisseur DC-AC offshore et l'autre (commande d-q) avec EKF integre pour controler les convertisseurs des deux stations AC-DC et DC-AC tout en tenant compte des entrees de chacune des stations. L'integration des observateurs non-lineaires (EKF) dans le controle des convertisseurs permet de resoudre le probleme des incertitudes de mesure, des incertitudes dans la modelisation, en cas du dysfonctionnement ou de panne des capteurs de mesure ainsi que le probleme de l'impact des defauts (AC et DC) sur la qualite d'energie dans les systemes de transmission. Ces estimations contribuent a rendre le cout global du systeme moins cher et sa taille moins encombrante ainsi que la reduction de l'impact des defauts (AC et DC) sur le systeme. La troisieme contribution concerne la reduction de la taille, du cout et de l'impact des defauts electriques (AC et DC) dans le systeme construit pour transporter l'energie d'un parc eolien offshore (OWF) vers le reseau principal AC onshore via deux stations VSC-HVDC. La solution developpee utilise des observateurs non-lineaires bases sur le filtre de Kalman etendu (EKF). Ce filtre permet d'estimer la vitesse de rotation et la position du rotor de chacune des generatrices du parc eolien et de la tension du bus DC de l'onduleur DC-AC offshore. La contribution porte surtout sur le developpement des deux commandes des deux stations. La premiere, la commande non-lineaire modifiee pour controler le premier convertisseur de la station VSC-HVDC offshore assurant le transfert de la puissance generee par le parc eolien vers la station VSC-HVDC onshore. La deuxieme commande non-lineaire modifiee avec integration de la regulation de la tension du bus DC et de la commande a modele de reference adaptative (MRAC) pour la compensation des surintensites et surtensions durant les defauts AC et DC. On peut constater que lors d'un defaut AC au PCC (Point of Common Coupling) du cote reseau onshore, la profondeur de l'impact du defaut AC sur l'amplitude des courants du reseau principal AC onshore qui etait reduit a 60% par les travaux de recherche (Erlich, Feltes et Shewarega, 2014), comparativement a la nouvelle commande proposee MRAC qui reduit la profondeur de l'impact a 35%. Lors de l'apparition des defauts AC et DC, une reduction de l'impact des defauts sur l'amplitude des courants de reseau AC terrestre et du temps de reponse a ete observee et la stabilite du systeme a ete renforcee par l'utilisation de la commande adaptative basee sur le modele de reference MRAC. La quatrieme contribution concerne une nouvelle commande basee sur le mode de glissement (SM) appliquee pour la station VSC-HVDC qui relie le parc eolien offshore (OWF) au reseau principal AC. Ce parc est compose de dix eoliennes basees sur des generatrices synchrones a aimant permanent (VSWT/PMSGs) connectees en parallele et chacune est controlee par son propre convertisseur DC-DC. Une comparaison des performances entre la commande SM et de la commande non-lineaire avec des controleurs PI pour les deux conditions (presence et absence de defaut DC) a ete analysee et montre la superiorite de la commande par SM. Un prototype du systeme etudie a echelle reduite a ete realise et teste au laboratoire GREPCI en utilisant la carte dSPACE-DS1104 pour la validation experimentale. L'analyse et la simulation des systemes etudies sont developpees sous l'environnement Matlab/Simulink/Simpowersystem. Les resultats obtenus a partir des configurations developpees sont valides par simulation et par experimentation. Les performances sont tres satisfaisantes du point de vue reponse dynamique, reponse en regime permanent, stabilite du systeme et qualite de l'energie.

A Closed-Loop Optimal Neural-Network Controller to Optimize Rotorcraft Aeromechanical Behaviour. Volume 1; Theory and Methodology

NASA Technical Reports Server (NTRS)

Leyland, Jane Anne

2001-01-01

Given the predicted growth in air transportation, the potential exists for significant market niches for rotary wing subsonic vehicles. Technological advances which optimise rotorcraft aeromechanical behaviour can contribute significantly to both their commercial and military development, acceptance, and sales. Examples of the optimisation of rotorcraft aeromechanical behaviour which are of interest include the minimisation of vibration and/or loads. The reduction of rotorcraft vibration and loads is an important means to extend the useful life of the vehicle and to improve its ride quality. Although vibration reduction can be accomplished by using passive dampers and/or tuned masses, active closed-loop control has the potential to reduce vibration and loads throughout a.wider flight regime whilst requiring less additional weight to the aircraft man that obtained by using passive methads. It is ernphasised that the analysis described herein is applicable to all those rotorcraft aeromechanical behaviour optimisation problems for which the relationship between the harmonic control vector and the measurement vector can be adequately described by a neural-network model.

Estrogen-Induced Maldevelopment of the Penis Involves Down-Regulation of Myosin Heavy Chain 11 (MYH11) Expression, a Biomarker for Smooth Muscle Cell Differentiation1

PubMed Central

Okumu, L.A.; Bruinton, Sequoia; Braden, Tim D.; Simon, Liz; Goyal, Hari O.

2012-01-01

ABSTRACT Cavernous smooth muscle cells are essential components in penile erection. In this study, we investigated effects of estrogen exposure on biomarkers for smooth muscle cell differentiation in the penis. Neonatal rats received diethylstilbestrol (DES), with or without the estrogen receptor (ESR) antagonist ICI 182,780 (ICI) or the androgen receptor (AR) agonist dihydrotestosterone (DHT), from Postnatal Days 1 to 6. Tissues were collected at 7, 10, or 21 days of age. The smooth muscle cell biomarker MYH11 was studied in depth because microarray data showed it was significantly down-regulated, along with other biomarkers, in DES treatment. Quantitative real time-PCR and Western blot analyses showed 50%–80% reduction (P ≤ 0.05) in Myh11 expression in DES-treated rats compared to that in controls; and ICI and DHT coadministration mitigated the decrease. Temporally, from 7 to 21 days of age, Myh11 expression was onefold increased (P ≥ 0.05) in DES-treated rats versus threefold increased (P ≤ 0.001) in controls, implying the long-lasting inhibitory effect of DES on smooth muscle cell differentiation. Immunohistochemical localization of smooth muscle alpha actin, another biomarker for smooth muscle cell differentiation, showed fewer cavernous smooth muscle cells in DES-treated animals than in controls. Additionally, DES treatment significantly up-regulated Esr1 mRNA expression and suppressed the neonatal testosterone surge by 90%, which was mitigated by ICI coadministration but not by DHT coadministration. Collectively, results provided evidence that DES treatment in neonatal rats inhibited cavernous smooth muscle cell differentiation, as shown by down-regulation of MYH11 expression at the mRNA and protein levels and by reduced immunohistochemical staining of smooth muscle alpha actin. Both the ESR and the AR pathways probably mediate this effect. PMID:22976277

Robust distributed model predictive control of linear systems with structured time-varying uncertainties

NASA Astrophysics Data System (ADS)

Zhang, Langwen; Xie, Wei; Wang, Jingcheng

2017-11-01

In this work, synthesis of robust distributed model predictive control (MPC) is presented for a class of linear systems subject to structured time-varying uncertainties. By decomposing a global system into smaller dimensional subsystems, a set of distributed MPC controllers, instead of a centralised controller, are designed. To ensure the robust stability of the closed-loop system with respect to model uncertainties, distributed state feedback laws are obtained by solving a min-max optimisation problem. The design of robust distributed MPC is then transformed into solving a minimisation optimisation problem with linear matrix inequality constraints. An iterative online algorithm with adjustable maximum iteration is proposed to coordinate the distributed controllers to achieve a global performance. The simulation results show the effectiveness of the proposed robust distributed MPC algorithm.

An optimised patient information sheet did not significantly increase recruitment or retention in a falls prevention study: an embedded randomised recruitment trial.

PubMed

Cockayne, Sarah; Fairhurst, Caroline; Adamson, Joy; Hewitt, Catherine; Hull, Robin; Hicks, Kate; Keenan, Anne-Maree; Lamb, Sarah E; Green, Lorraine; McIntosh, Caroline; Menz, Hylton B; Redmond, Anthony C; Rodgers, Sara; Torgerson, David J; Vernon, Wesley; Watson, Judith; Knapp, Peter; Rick, Jo; Bower, Peter; Eldridge, Sandra; Madurasinghe, Vichithranie W; Graffy, Jonathan

2017-03-28

Randomised controlled trials are generally regarded as the 'gold standard' experimental design to determine the effectiveness of an intervention. Unfortunately, many trials either fail to recruit sufficient numbers of participants, or recruitment takes longer than anticipated. The current embedded trial evaluates the effectiveness of optimised patient information sheets on recruitment of participants in a falls prevention trial. A three-arm, embedded randomised methodology trial was conducted within the National Institute for Health Research-funded REducing Falls with ORthoses and a Multifaceted podiatry intervention (REFORM) cohort randomised controlled trial. Routine National Health Service podiatry patients over the age of 65 were randomised to receive either the control patient information sheet (PIS) for the host trial or one of two optimised versions, a bespoke user-tested PIS or a template-developed PIS. The primary outcome was the proportion of patients in each group who went on to be randomised to the host trial. Six thousand and nine hundred patients were randomised 1:1:1 into the embedded trial. A total of 193 (2.8%) went on to be randomised into the main REFORM trial (control n = 62, template-developed n = 68; bespoke user-tested n = 63). Information sheet allocation did not improve recruitment to the trial (odds ratios for the three pairwise comparisons: template vs control 1.10 (95% CI 0.77-1.56, p = 0.60); user-tested vs control 1.01 (95% CI 0.71-1.45, p = 0.94); and user-tested vs template 0.92 (95% CI 0.65-1.31, p = 0.65)). This embedded methodology trial has demonstrated limited evidence as to the benefit of using optimised information materials on recruitment and retention rates in the REFORM study. International Standard Randomised Controlled Trials Number registry, ISRCTN68240461 . Registered on 01 July 2011.

Integrated health management and control of complex dynamical systems

NASA Astrophysics Data System (ADS)

Tolani, Devendra K.

2005-11-01

A comprehensive control and health management strategy for human-engineered complex dynamical systems is formulated for achieving high performance and reliability over a wide range of operation. Results from diverse research areas such as Probabilistic Robust Control (PRC), Damage Mitigating/Life Extending Control (DMC), Discrete Event Supervisory (DES) Control, Symbolic Time Series Analysis (STSA) and Health and Usage Monitoring System (HUMS) have been employed to achieve this goal. Continuous-domain control modules at the lower level are synthesized by PRC and DMC theories, whereas the upper-level supervision is based on DES control theory. In the PRC approach, by allowing different levels of risk under different flight conditions, the control system can achieve the desired trade off between stability robustness and nominal performance. In the DMC approach, component damage is incorporated in the control law to reduce the damage rate for enhanced structural durability. The DES controller monitors the system performance and, based on the mission requirements (e.g., performance metrics and level of damage mitigation), switches among various lower-level controllers. The core idea is to design a framework where the DES controller at the upper-level, mimics human intelligence and makes appropriate decisions to satisfy mission requirements, enhance system performance and structural durability. Recently developed tools in STSA have been used for anomaly detection and failure prognosis. The DMC deals with the usage monitoring or operational control part of health management, where as the issue of health monitoring is addressed by the anomaly detection tools. The proposed decision and control architecture has been validated on two test-beds, simulating the operations of rotorcraft dynamics and aircraft propulsion.

Etude exploratoire des conceptions de la circulation sanguine aupres d'eleves de l'ordre collegial

NASA Astrophysics Data System (ADS)

Robitaille, Jean-Marc

Il existe peu d'etudes sur les conceptions touchant les domaines de la biologie, notamment sur les conceptions de la circulation sanguine Nous avons observe egalement l'absence de recherche menee aupres d'eleves de l'ordre collegial sur cette question. Nous avons voulu combler une lacune en menant une recherche sur les conceptions de la circulation sanguine aupres d'eleves de l'ordre collegial. Pour mener cette recherche nous nous sommes inspires d'une methode developpee par Treagust (1988). Le premier niveau de formulation didactique etablit l'architecture du systeme et la fonction nutritive de la circulation. Le second niveau de formulation didactique decrit et relie les parametres de la dynamique de la circulation et leur relation: Pression, Debit et Resistance. Le troisieme niveau de formulation didactique s'interesse au controle de la circulation du sang dans un contexte d'homeostasie qui implique la regulation de la pression arterielle. Nous avons construit un questionnaire en nous guidant sur les niveaux de formulation didactique et l'analyse des entrevues menees aupres de dix-huit eleves, representatifs de la population cible. Ce questionnaire fut administre a un echantillon de 2300 eleves disperses dans six colleges de la region de Montreal. Notre echantillon comprend des eleves inscrits a des programmes de l'ordre collegial en Sciences de la nature et en Techniques de la sante et qui n'ont pas suivi le cours sur la circulation sanguine. Notre analyse des reponses des eleves de notre echantillon aux questions sur le premier niveau de formulation didactique revele que la majorite des eleves considerent que le systeme circulatoire relie les organes les uns aux autres dans un circuit en serie. Notre analyse revele egalement que la majorite des eleves estiment que les nutriments sont extraits du sang par les organes selon un processus de selection base sur les besoins determines par la fonction de l'organe. Ces besoins sont differents selon les organes qui ne prelevent que les nutriments necessaires. Au second niveau les reponses des eleves de la population indiquent une conception de la dynamique cardio-vasculaire axee d'abord sur le coeur, laissant aux vaisseaux un role passif de canaux. Ces reponses indiquent egalement que la dynamique circulatoire est reduite a une sequence d'etapes ponctuelles sans relation les unes avec les autres. Au troisieme niveau les reponses des eleves de la population font etat d'une conception du controle qui privilegie la satisfaction de besoins locaux, sans relation systemique. Nos resultats suggerent que les eleves de notre echantillon affichent une plus grande concordance avec l'expert pour les questions du premier niveau (70%) que pour les niveaux II (54%) et III (50%). Notre analyse des donnees revele que l'accord avec l'expert est eleve lorsque la questions touchent la description des structures et la definition de leurs roles et plus faible lorsque les questions touchent la dynamique et le controle. Il existerait donc un niveau de formulation qui correspond a la description de structures et un autre niveau qui recoupe toute la dynamique de la circulation et son controle. Du point de vue didactique lanalyse des donnees suggere que nous ne retrouvons pas une correspondance entre les niveaux de formulation didactique et les conceptions des eleves. (Abstract shortened by UMI.)

Diethylstilbestrol-Induced Mouse Hypospadias: “Window of Susceptibility”

PubMed Central

Sinclair, Adriane Watkins; Cao, Mei; Baskin, Laurence; Cunha, Gerald R.

2016-01-01

Hypospadias, an abnormality affecting the penile urethra, is one of the most prevalent congenital malformations afflicting human males. The morphology of hypospadias is markedly different in humans versus mice reflecting substantial differences in penile development in humans and mice. Estrogens such as diethylstilbestrol (DES) elicit mouse penile malformations, but the types of penile abnormalities differ depending on whether DES treatment is prenatal or neonatal. To define the actual “window of susceptibility” to the adverse effects of DES, pregnant mice and their neonatal pups were injected subcutaneously with 200ng/gbw DES every other day from embryonic day 12 to 18 (DES E12-E18), postnatal day 0 to 10 (DES P0-P10), embryonic day 12 to postnatal day 10 (DES E12 to P10), postnatal day 5 to 15 (DES P5 to P15), and postnatal day 10 to 20 (DES P10 to P20). Aged-matched controls received sesame oil vehicle. After euthanasia at 10, 15, 20 and 60 days, penises were analyzed by gross morphology, histology and morphometry. Penises of all 5 groups of DES-treated mice were reduced in size, which was confirmed by morphometric analysis of internal penile structures. The most profound effects were seen in the DES E12-P10, DES P0-P10, and DES P5-P15 groups, thus defining a DES “programming window”. For all parameters, DES treatment from P10-P20 showed the most mild of effects. Adverse effects of DES on the MUMP cartilage and erectile bodies observed shortly after the last DES injection reverted to normality in the DES P5-P15, but not in the E12-P10 and P0-P10 groups, in which MUMP cartilage and erectile body malformations persisted into adulthood, again emphasizing a “window of susceptibility” in the early neonatal period. PMID:26810244

Effects of postnatal administration of diethylstilbestrol on puberty and thyroid function in male rats.

PubMed

Shin, Jae-Ho; Kim, Tae Sung; Kang, Il Hyun; Kang, Tae Seok; Moon, Hyun Ju; Han, Soon-Young

2009-10-01

To examine the effects of diethylstilbestrol (DES) on male pubertal development and thyroid function, juvenile male Sprague-Dawley rats were given DES daily by oral intubation at doses of 10, 20 and 40 microg/kg/day from postnatal day 33 for 20 days. Prepuce separation was significantly delayed at the dose of 20 microg/kg/day and above in the DES-treated rats. DES treatment induced a significant reduction in the weights of testes, epididymides, the ventral prostate, seminal vesicles plus coagulating glands and fluid, levator ani bulbocavernosus muscles, Cowper's glands and the glans penis. The weights of the liver and adrenals increased in the DES-treated animals. DES caused a dose-dependent reduction in germ cells; in particular the spermatids were mainly affected. The serum levels of testosterone and luteinizing hormone were significantly reduced in the DES-treated groups, but that of estradiol decreased. No differences were observed in the serum thyroxine levels of the control and DES-treated groups. In microscopic observation of the DES-treated animals, degeneration of germ cells and tubular atrophy in the testis were noted, but there were no microscopic changes in the thyroid. These results indicate that DES affected the pubertal development of juvenile male rats and that its mode of action may be related to alterations in hormone levels.

The robust model predictive control based on mixed H2/H∞ approach with separated performance formulations and its ISpS analysis

NASA Astrophysics Data System (ADS)

Li, Dewei; Li, Jiwei; Xi, Yugeng; Gao, Furong

2017-12-01

In practical applications, systems are always influenced by parameter uncertainties and external disturbance. Both the H2 performance and the H∞ performance are important for the real applications. For a constrained system, the previous designs of mixed H2/H∞ robust model predictive control (RMPC) optimise one performance with the other performance requirement as a constraint. But the two performances cannot be optimised at the same time. In this paper, an improved design of mixed H2/H∞ RMPC for polytopic uncertain systems with external disturbances is proposed to optimise them simultaneously. In the proposed design, the original uncertain system is decomposed into two subsystems by the additive character of linear systems. Two different Lyapunov functions are used to separately formulate the two performance indices for the two subsystems. Then, the proposed RMPC is designed to optimise both the two performances by the weighting method with the satisfaction of the H∞ performance requirement. Meanwhile, to make the design more practical, a simplified design is also developed. The recursive feasible conditions of the proposed RMPC are discussed and the closed-loop input state practical stable is proven. The numerical examples reflect the enlarged feasible region and the improved performance of the proposed design.

Mesure Objective De L'attenuation et De L'effet D'occlusion Des Protecteurs Auditifs a Partir Des Potentiels Evoques Stationnaires et Multiples =

NASA Astrophysics Data System (ADS)

Valentin, Olivier

Selon l'Organisation mondiale de la sante, le nombre de travailleurs exposes quotidiennement a des niveaux de bruit prejudiciables a leur audition est passe de 120 millions en 1995 a 250 millions en 2004. Meme si la reduction du bruit a la source devrait etre toujours privilegiee, la solution largement utilisee pour lutter contre le bruit au travail reste la protection auditive individuelle. Malheureusement, le port des protecteurs auditifs n'est pas toujours respecte par les travailleurs car il est difficile de fournir un protecteur auditif dont le niveau d'attenuation effective est approprie a l'environnement de travail d'un individu. D'autre part, l'occlusion du canal auditif induit une modification de la perception de la parole, ce qui cree un inconfort incitant les travailleurs a retirer leurs protecteurs. Ces deux problemes existent parce que les methodes actuelles de mesure de l'effet d'occlusion et de l'attenuation sont limitees. Les mesures objectives basees sur des mesures microphoniques intra-auriculaires ne tiennent pas compte de la transmission directe du son a la cochlee par conduction osseuse. Les mesures subjectives au seuil de l'audition sont biaisees a cause de l'effet de masquage aux basses frequences induit par le bruit physiologique. L'objectif principal de ce travail de these de doctorat est d'ameliorer la mesure de l'attenuation et de l'effet d'occlusion des protecteurs auditifs intra-auriculaires. L'approche generale consiste a : (i) verifier s'il est possible de mesurer l'attenuation des protecteurs auditifs grâce au recueil des potentiels evoques stationnaires et multiples (PEASM) avec et sans protecteur auditif (protocole 1), (ii) adapter cette methodologie pour mesurer l'effet d'occlusion induit par le port de protecteur auditifs intra-auriculaires (protocole 2), et (iii) valider chaque protocole par l'intermediaire de mesures realisees sur sujets humains. Les resultats du protocole 1 demontrent que les PEASM peuvent etre utilises pour mesurer objectivement l'attenuation des protecteurs auditifs : les resultats obtenus a 500 Hz et 1 kHz demontrent que l'attenuation mesuree a partir des PEASM est relativement equivalente a l'attenuation calculee par la methode REAT, ce qui est en accord avec ce qui etait attendu puisque l'effet de masquage induit par le bruit physiologique aux basses frequences est relativement negligeable a ces frequences. Les resultats du protocole 2 demontrent que les PEASM peuvent etre egalement utilises pour mesurer objectivement l'effet d'occlusion induit par le port de protecteurs auditifs : l'effet d'occlusion mesure a partir des PEASM a 500 Hz est plus eleve que celui calcule par l'intermediaire de la methode subjective au seuil de l'audition, ce qui est en accord avec ce qui etait attendu puisqu'en dessous d'1 kHz, l'effet de masquage induit par le bruit physiologique aux basses frequences est source de biais pour les resultats obtenus par la methode subjective car il y a surestimation des seuils de l'audition en basse frequence lors du port de protecteurs auditifs. Toutefois, les resultats obtenus a 250 Hz sont en contradiction avec les resultats attendus. D'un point de vue scientifique, ce travail de these a permis de realiser deux nouvelles methodes innovantes pour mesurer objectivement l'attenuation et l'effet d'occlusion des protecteurs auditifs intra-auriculaires par electroencephalographie. D'un point de vue sante et securite au travail, les avancees presentees dans cette these pourraient aider a concevoir des protecteurs auditifs plus performants. En effet, si ces deux nouvelles methodes objectives etaient normalisees pour caracteriser les protecteurs auditifs intra-auriculaires, elles pourraient permettre : (i) de mieux apprehender l'efficacite reelle de la protection auditive et (ii) de fournir une mesure de l'inconfort induit par l'occlusion du canal auditif lors du port de protecteurs. Fournir un protecteur auditif dont l'efficacite reelle est adaptee a l'environnement de travail et dont le confort est optimise permettrait, sur le long terme, d'ameliorer les conditions des travailleurs en minimisant le risque lie a la degradation de leur appareil auditif. Les perspectives de travail proposees a la fin de cette these consistent principalement a : (i) exploiter ces deux methodes avec une gamme frequentielle plus etendue, (ii) explorer la variabilite intra-individuelle de chacune des methodes, (iii) comparer les resultats des deux methodes avec ceux obtenus par l'intermediaire de la methode "Microphone in Real Ear" (MIRE) et (iv) verifier la compatibilite de chacune des methodes avec tous les types de protecteurs auditifs. De plus, pour la methode de mesure de l'effet d'occlusion utilisant les PEASM, une etude complementaire est necessaire pour lever la contradiction observee a 250 Hz.

Fault Tolerant Design Concepts for Highly Integrated Flight Critical Guidance and Control Systems: Conference Proceedings Held at the Guidance and Control Panel Symposium (49th) Held in Toulouse, France on 10-13 October 1989

DTIC Science & Technology

1990-04-01

conception des postes de pilotage et les r6les des pilotes doivent itre difinis avec soin en face des tiches automatis6es ainsi que les pcifications de...from USA and Canada: Commandant M.Mouhamad. FAF AGARD-NATO Executive, GCP Attention : GCP Executive AGARD-OTAN APO New York 09777 7 rue Ancelle F-92200...G.Manfeld 54 UN SYSTEME DE REFERENCES PRIMAIRES DE HAUTE INTEGRITE (A High Integrity Flight Data System) par J.L.Roch et J.Contet 55 ..... 4- K- ’-I

Analysis and optimisation of the convergence behaviour of the single channel digital tanlock loop

NASA Astrophysics Data System (ADS)

Al-Kharji Al-Ali, Omar; Anani, Nader; Al-Araji, Saleh; Al-Qutayri, Mahmoud

2013-09-01

The mathematical analysis of the convergence behaviour of the first-order single channel digital tanlock loop (SC-DTL) is presented. This article also describes a novel technique that allows controlling the convergence speed of the loop, i.e. the time taken by the phase-error to reach its steady-state value, by using a specialised controller unit. The controller is used to adjust the convergence speed so as to selectively optimise a given performance parameter of the loop. For instance, the controller may be used to speed up the convergence in order to increase the lock range and improve the acquisition speed. However, since increasing the lock range can degrade the noise immunity of the system, in a noisy environment the controller can slow down the convergence speed until locking is achieved. Once the system is in lock, the convergence speed can be increased to improve the acquisition speed. The performance of the SC-DTL system was assessed against similar arctan-based loops and the results demonstrate the success of the controller in optimising the performance of the SC-DTL loop. The results of the system testing using MATLAB/Simulink simulation are presented. A prototype of the proposed system was implemented using a field programmable gate array module and the practical results are in good agreement with those obtained by simulation.

Analysis of phospholipid fatty acids (PLFA) to characterize microbial communities in aquifers

NASA Astrophysics Data System (ADS)

Green, Christopher T.; Scow, Kate M.

This paper reviews published applications of lipid-based biochemical techniques for characterizing microbial communities in aquifers and other deep subsurface habitats. These techniques, such as phospholipid fatty acid (PLFA) analysis, can provide information on a variety of microbial characteristics, such as biomass, physiology, taxonomic and functional identity, and overall community composition. In addition, multivariate statistical analysis of lipid data can relate spatial or temporal changes in microbial communities to environmental factors. The use of lipid-based techniques in the study of groundwater microbiology is advantageous because they do not require culturing and can provide quantitative data on entire communities. However, combined effects of physiological and phylogenetic changes on the lipid composition of a community can confound interpretation of the data, and many questions remain about the validity of various lipid techniques. Despite these caveats, lipid-based research has begun to show trends in community composition in contaminated and pristine aquifers that contribute to our understanding of groundwater microbial ecology and have potential for use in optimization of bioremediation of groundwater pollutants. Résumé Ce papier passe en revue les applications des techniques biochimiques basées sur les lipides pour caractériser les communautés microbiennes présentes dans les aquifères et dans les autres habitats souterrains profonds. Ces techniques, telles que l'analyse des acides gras phospholipidiques (PLFA), peuvent fournir des informations sur un ensemble de caractères microbiens, tels que la biomasse, la physiologie, l'identité taxonomique et fonctionnelle, et surtout la composition de la communauté. En outre, l'analyse statistique multivariée des données sur les lipides peut établir les liens entre des changements spatiaux ou temporels dans la communauté microbienne et des facteurs environnementaux. L'utilisation des techniques basées sur les lipides dans l'étude de la microbiologie des eaux souterraines est intéressante parce qu'elle ne nécessite pas de mise en culture et qu'elle peut fournir des données quantitatives sur les communautés dans leur ensemble. Toutefois, les effets combinés de changements physiologiques et phylogénétiques sur la composition d'une communauté peuvent brouiller l'interprétation des données de nombreuses questions se posent sur la validité des différentes techniques lipidiques. Malgré ces oppositions, la recherche basée sur les lipides a commencéà montrer des tendances dans la composition des communautés dans les aquifères pollués et dans ceux non perturbés ces résultats contribuent ainsi à notre compréhension de l'écologie microbienne des eaux souterraines et montrent qu'il existe un potentiel pour leur utilisation en vue d'une optimisation de la dépollution biologique des eaux souterraines. Resumen Se revisan distintas técnicas bioquímicas que se basan en el análisis de lípidos para caracterizar las comunidades microbianas en hábitats subsuperficiales, incluyendo acuíferos. Estas técnicas, entre las que se incluye el análisis de ácidos grasos fosfolípidos (PLFA), pueden proporcionar información sobre toda una serie de características de las comunidades microbianas, como su biomasa, fisiología, identidad taxonómica y funcional y composición. Además, el análisis estadístico multivariado de los datos de lípidos permite relacionar los cambios espaciales o temporales en las comunidades microbianas con factores ambientales. Las técnicas basadas en lípidos son muy útiles para el estudio microbiológico de las aguas subterráneas, puesto que no requieren cultivos y además proporcionan datos cuantitativos de comunidades completas. Sin embargo, la acción combinada de los cambios fisiológicos y filogenéticos en la composición de lípidos en una comunidad pueden confundir la interpretación de los datos, por lo existen muchas cuestiones abiertas respecto a la validez de algunas de estas técnicas. A pesar de estas dificultades, estas técnicas han permitido detectar diferentes tendencias en la composición de las comunidades en acuíferos con y sin contaminación, lo que contribuye a nuestro entendimiento de la ecología microbiana de los acuíferos. Este último aspecto tiene un uso potencial en la optimización de los métodos de biorremediación de acuíferos.

75 FR 76666 - Reporting, Recordkeeping, and Daily Trading Records Requirements for Swap Dealers and Major Swap...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-09

... Commission \\11\\ and by the Autorit[eacute] des March[eacute]s Financiers in France,\\12\\ and have been... Securities and Futures Commission para. 3.9 (2010) (H.K.). \\12\\ General Regulation of the Autorit[eacute] des... it displays a currently valid control number. The OMB has not yet assigned this collection a control...

Do Perceptions of Empowerment Affect Glycemic Control and Self-Care Among Adults with Type 2 Diabetes?

PubMed

D'Souza, Melba Sheila; Karkada, Subrahmanya Nairy; Hanrahan, Nancy P; Venkatesaperumal, Ramesh; Amirtharaj, Anandhi

2015-02-24

The Arab adult with T2DM is understudied with less known facts about the perception of empowerment and its relationship with self-care and glycemic control. The purpose of this study was to determine the extent to which perception of empowerment by Arab adults living with Type 2 Diabetes Mellitus (T2DM) was associated with better glycemic control and self-care management. A cross-sectional descriptive study was led among 300 Arab adults living in Oman with T2DM in an outpatient diabetes clinic. The Diabetes Empowerment Scale (DES), glycosylated haemaglobin (HbA1c) and Body mass index was assessed. The DES was found to be valid and reliable for the population. ANOVA, Regression analysis, and Structural equation modeling was used for analysis. The composite score and three subscales of DES were a significant and strong predictor of good glycemic control among Omani adults with T2DM (p<0.001). Age, education, duration of DM, prior DM education program and medications were significantly associated with DES. Diabetes nurse educators engaged in the care of adults with T2DM should assess self-empowerment and tailor interventions to increase empowerment for better glycemic control. Patient empowerment plays an essential role in maintaining self-care behaviours and HbA1c.

Meta-analysis of long-term outcomes of drug-eluting stent implantations for chronic total coronary occlusions.

PubMed

Ma, Jian; Yang, Weiwei; Singh, Manpreet; Peng, Tianqing; Fang, Ningyuan; Wei, Meng

2011-01-01

In the treatment of chronic total occlusions (CTOs), some uncertainty exists regarding the effect of drug-eluting stents (DESs) compared with the effects of bare mental stents (BMSs). We reviewed outcomes of DES vs. BMS implantation for CTO lesions, to evaluate the risk-benefit ratio of DES implantation. Relevant studies of long-term clinical outcomes or angiographic outcomes of both BMS and DES implantation were examined. The primary endpoint comprised major adverse cardiovascular events (MACEs), including all-cause deaths, myocardial infarctions (MIs), and target lesion revascularizations (TLRs). A fixed-effect model and random-effect model were used to analyze the pooling results. Ten studies were included according to the selection criteria. Eight were nonrandomized controlled trials, and two consisted of a randomized controlled comparison between DES and BMS implantation. No significant difference was evident for in-hospital MACE rates between the two groups (odds ratio [OR], 1.07; 95% confidence interval [CI], .53 to 2.13), but the long-term MACE rates in the DES group were significantly lower than in the BMS group (OR, .22; 95% CI, .13 to .38; P < .00001). The rates of stent restenosis and reocclusions were also significantly lower in the DES group (OR, .14; 95% CI, .09 to .20; and OR, .23; 95% CI, .12 to .41, respectively). Implantation of the DES improves long-term angiographic and clinical outcomes compared with BMS in the treatment of CTO lesions. Copyright © 2011 Elsevier Inc. All rights reserved.

Optimal type 2 diabetes mellitus management: the randomised controlled OPTIMISE benchmarking study: baseline results from six European countries.

PubMed

Hermans, Michel P; Brotons, Carlos; Elisaf, Moses; Michel, Georges; Muls, Erik; Nobels, Frank

2013-12-01

Micro- and macrovascular complications of type 2 diabetes have an adverse impact on survival, quality of life and healthcare costs. The OPTIMISE (OPtimal Type 2 dIabetes Management Including benchmarking and Standard trEatment) trial comparing physicians' individual performances with a peer group evaluates the hypothesis that benchmarking, using assessments of change in three critical quality indicators of vascular risk: glycated haemoglobin (HbA1c), low-density lipoprotein-cholesterol (LDL-C) and systolic blood pressure (SBP), may improve quality of care in type 2 diabetes in the primary care setting. This was a randomised, controlled study of 3980 patients with type 2 diabetes. Six European countries participated in the OPTIMISE study (NCT00681850). Quality of care was assessed by the percentage of patients achieving pre-set targets for the three critical quality indicators over 12 months. Physicians were randomly assigned to receive either benchmarked or non-benchmarked feedback. All physicians received feedback on six of their patients' modifiable outcome indicators (HbA1c, fasting glycaemia, total cholesterol, high-density lipoprotein-cholesterol (HDL-C), LDL-C and triglycerides). Physicians in the benchmarking group additionally received information on levels of control achieved for the three critical quality indicators compared with colleagues. At baseline, the percentage of evaluable patients (N = 3980) achieving pre-set targets was 51.2% (HbA1c; n = 2028/3964); 34.9% (LDL-C; n = 1350/3865); 27.3% (systolic blood pressure; n = 911/3337). OPTIMISE confirms that target achievement in the primary care setting is suboptimal for all three critical quality indicators. This represents an unmet but modifiable need to revisit the mechanisms and management of improving care in type 2 diabetes. OPTIMISE will help to assess whether benchmarking is a useful clinical tool for improving outcomes in type 2 diabetes.

Le role du phytoplancton de petite taille (<20 mum) dans les variations des proprietes optiques des eaux du Saint-Laurent

NASA Astrophysics Data System (ADS)

Mas, Sebastien

Les mesures satellitaires de couleur des oceans sont largement determinees par les proprietes optiques inherentes (IOPs) des eaux de surface. D'autre part, le phytoplancton de petite taille (<20 mum) est le plus souvent dominant dans les oceans, et peut donc etre une source importante de variation des IOPs dans les oceans. Dans ce contexte, le but principal de ce doctorat etait de definir l'impact du phytoplancton (<20 mum) sur les variations des proprietes optiques de l'Estuaire et du Golfe du Saint-Laurent (Canada). Afin d'atteindre cet objectif, il etait necessaire de determiner en milieu controle les facteurs de variabilite des proprietes optiques cellulaires et des IOPs du phytoplancton (<20 mum) des eaux du Saint-Laurent, et d'evaluer la contribution du phytoplancton (<20 mum) aux proprietes optiques totales des eaux du Saint-Laurent. Des experiences en laboratoire ont montre que les variations des proprietes optiques des cellules phytoplanctoniques soumises a un cycle jour-nuit, ainsi qu'a des changements concomitants d'intensite lumineuse, peuvent contribuer significativement a la variabilite des proprietes optiques observee en milieu naturel. D'autres experiences ont, quant a elles, mis en evidence que les variations des proprietes optiques des cellules phytoplanctoniques dues aux phases de croissance peuvent alterer les IOPs des oceans, particulierement pendant les periodes de floraison. De plus, la presence de bacteries et de particules detritiques peut egalement affecter la variabilite des IOPs totales, notamment la diffusion. Au printemps, dans l'Estuaire et le Golfe du Saint-Laurent, la contribution du phytoplancton <20 mum aux IOPs presentait des differences regionales evidentes pour les proprietes d'absorption et de diffusion. En plus de la variabilite spatiale, les proprietes optiques cellulaires presentaient des variations journalieres, et ce particulierement pour le picophytoplancton. Enfin, la plupart des differences observees dans les proprietes biooptiques, particulierement l'absorption, etaient attribuables a la contribution du phytoplancton <20 mum. Ceci confirme l'importance de la structure de taille des communautes phytoplanctoniques dans les modeles bio-optiques appliques au Saint-Laurent. L'ensemble des resultats a permis de mettre en evidence l'importance des mecanismes de photoacclimatation et de synchronisation du cycle cellulaire du phytoplancton sur les variations journalieres des IOPs, ainsi que de l'etat physiologique relie au stade de croissance sur les variations temporelles a long terme des IOPs. De plus, le phytoplancton <20 mum contribue de maniere importante aux IOPs et a leur variabilite dans l'Estuaire et le Golfe du St-Laurent, et ce particulierement pour l'absorption. Cette etude de doctorat souligne donc l'importance du phytoplancton <20 mum sur la variabilite des IOPs des oceans.

Concept Designed and Developed for Distortion- Tolerant, High-Stability Engine Control

NASA Technical Reports Server (NTRS)

1995-01-01

Engine Control Future aircraft turbine engines, both commercial and military, must be able to successfully accommodate expected increased levels of steady-state and dynamic engine-face distortion. Advanced tactical aircraft are likely to use thrust vectoring to enhance their maneuverability. As a result, the engines will see more extreme aircraft angles-of-attack and sideslip levels than are currently encountered with present-day aircraft. Also, the mixed-compression inlets needed for the High Speed Civil Transport will likely encounter disturbances similar to those seen by tactical aircraft, in addition to planar pulse, inlet buzz, and high distortion levels at low flight speed and off-design operation. The current approach of incorporating a sufficient component design stall margin to tolerate these increased levels of distortion would significantly reduce performance. The objective of the High Stability Engine Control (HISTEC) program is to design, develop, and flight demonstrate an advanced, high-stability, integrated engine-control system that uses measurement-based, real-time estimates of distortion to enhance engine stability. The resulting distortion-tolerant control reduces the required design stall margin, with a corresponding increase in performance and decrease in fuel burn. The HISTEC concept has been designed and developed, and the software implementing the concept has successfully accommodated time-varying distortion. The NASA Lewis Research Center is currently overseeing the development and validation of the hardware and software necessary to flight test the HISTEC concept. HISTEC is a contracted effort with Pratt & Whitney of West Palm Beach, Florida. The HISTEC approach includes two major systems: A Distortion Estimation System (DES) and Stability Management Control (SMC). DES is an aircraft-mounted, high-speed processor that estimates the amount and type of distortion present and its effect on the engine. It uses high-response pressure measurements at the engine face to calculate indicators of the type and extent of distortion in real time. From these indicators, DES determines the effects of distortion on the propulsion systems and the corresponding engine match point necessary to accommodate it. DES output consists of fan and compressor pressure ratio trim commands that are passed to the SMC. In addition, DES uses maneuver information, consisting of angle-of-attack and sideslip from the flight control, to anticipate high inlet distortion conditions. The SMC, which is contained in the engine-mounted, Improved Digital Electronic Engine Control (IDEEC), includes advanced control laws to directly control the fan and compressor transient operating line (pressure ratio). These advanced control laws, with a multivariable design, have the potential for higher bandwidth and the resulting more precise control of engine match. The ability to measure and assess the distortion effects in real time coupled with a high-response controller improves engine stability at high levels of distortion. The software algorithms implementing DES have been designed, developed, and demonstrated, and integration testing of the DES and SMC software has been completed. The results show that the HISTEC system will be able to sense inlet distortion, determine the effect on engine stability, and accommodate distortion by maintaining an adequate margin for engine surge. The Pratt &Whitney Comprehensive Engine Diagnostic Unit was chosen as the DES processor. An instrumented inlet case for sensing distortion was designed and fabricated. HISTEC is scheduled for flight test on the ACTIVE F-15 aircraft at the NASA Dryden Flight Research Center in Edwards, California, in late 1996.

Planning for operating room efficiency and faster anesthesia wake-up time in open major upper abdominal surgery.

PubMed

Lai, Hou-Chuan; Chan, Shun-Ming; Lu, Chueng-He; Wong, Chih-Shung; Cherng, Chen-Hwan; Wu, Zhi-Fu

2017-02-01

Reducing anesthesia-controlled time (ACT) may improve operation room (OR) efficiency result from different anesthetic techniques. However, the information about the difference in ACT between desflurane (DES) anesthesia and propofol-based total intravenous anesthesia (TIVA) techniques for open major upper abdominal surgery under general anesthesia (GA) is not available in the literature.This retrospective study uses our hospital database to analyze the ACT of open major upper abdominal surgery without liver resection after either desflurane/fentanyl-based anesthesia or TIVA via target-controlled infusion with fentanyl/propofol from January 2010 to December 2011. The various time intervals including waiting for anesthesia time, anesthesia time, surgical time, extubation time, exit from OR after extubation, total OR time, and postanesthetic care unit (PACU) stay time and percentage of prolonged extubation (≥15 minutes) were compared between these 2 anesthetic techniques.We included data from 343 patients, with 159 patients receiving TIVA and 184 patients receiving DES. The only significant difference is extubation time, TIVA was faster than the DES group (8.5 ± 3.8 vs 9.4 ± 3.7 minutes; P = 0.04). The factors contributed to prolonged extubation were age, gender, body mass index, DES anesthesia, and anesthesia time.In our hospital, propofol-based TIVA by target-controlled infusion provides faster emergence compared with DES anesthesia; however, it did not improve OR efficiency in open major abdominal surgery. Older, male gender, higher body mass index, DES anesthesia, and lengthy anesthesia time were factors that contribute to extubation time.

Evaluation of Relationship between Obsessive-compulsive Disorder and Dissociative Experiences.

PubMed

Tatlı, Mustafa; Cetinkaya, Ozlem; Maner, Fulya

2018-05-31

The aim of the study is to evaluate the relationship between obsessive-compulsive disorder (OCD) symptoms and dissociative experiences and the effect of childhood traumatic experiences on this relationship in OCD patients. Fifty consecutive OCD patients and 50 healthy controls are enrolled for this study. Sociodemographic and Clinical Data Form, Dissociative Experiences Scale (DES), Padua Inventory (PI) and Childhood Trauma Questionnaire (CTQ) are applied to participants. Average DES total score in the patient group is 20.58 and in the control group it is 4.87. In the patient group, when we evaluate the relation strengths of DES total and subscale scores with PI total score, we found out that amnesia subscale has r=0.361 ( p <0.01), absorption subscale has r=0.611 ( p <0.01), depersonalization/derealization subscale has r=0.574 ( p <0.01), and DES total score has r=0.55 ( p <0.01) relation strengths with PI total score. In patient group both DES total score and CTQ total score have influence on PI total score independently from each other. In addition to this, the level of the influence of DES total scores on PI total scores is, R²=0.399 ( p <0.01) and the level of the influence of CTQ total scores on PI total scores is R²=0.343 ( p <0.01). Dissociative experiences are seen more frequently in OCD patients than healthy controls. Among dissociative experiences, absorption has stronger relation with OCD symptoms. The relation between OCD and dissociation is independent from and stronger than the relation between childhood traumatic experiences and OCD.

An integrated and dynamic optimisation model for the multi-level emergency logistics network in anti-bioterrorism system

NASA Astrophysics Data System (ADS)

Liu, Ming; Zhao, Lindu

2012-08-01

Demand for emergency resources is usually uncertain and varies quickly in anti-bioterrorism system. Besides, emergency resources which had been allocated to the epidemic areas in the early rescue cycle will affect the demand later. In this article, an integrated and dynamic optimisation model with time-varying demand based on the epidemic diffusion rule is constructed. The heuristic algorithm coupled with the MATLAB mathematical programming solver is adopted to solve the optimisation model. In what follows, the application of the optimisation model as well as a short sensitivity analysis of the key parameters in the time-varying demand forecast model is presented. The results show that both the model and the solution algorithm are useful in practice, and both objectives of inventory level and emergency rescue cost can be controlled effectively. Thus, it can provide some guidelines for decision makers when coping with emergency rescue problem with uncertain demand, and offers an excellent reference when issues pertain to bioterrorism.

De l'importance des orbites periodiques: Detection et applications

NASA Astrophysics Data System (ADS)

Doyon, Bernard

L'ensemble des Orbites Periodiques Instables (OPIs) d'un systeme chaotique est intimement relie a ses proprietes dynamiques. A partir de l'ensemble (en principe infini) d'OPIs cachees dans l'espace des phases, on peut obtenir des quantites dynamiques importantes telles les exposants de Lyapunov, la mesure invariante, l'entropie topologique et la dimension fractale. En chaos quantique (i.e. l'etude de systemes quantiques qui ont un equivalent chaotique dans la limite classique), ces memes OPIs permettent de faire le pont entre le comportement classique et quantique de systemes non-integrables. La localisation de ces cycles fondamentaux est un probleme complexe. Cette these aborde dans un premier temps le probleme de la detection des OPIs dans les systemes chaotiques. Une etude comparative de deux algorithmes recents est presentee. Nous approfondissons ces deux methodes afin de les utiliser sur differents systemes dont des flots continus dissipatifs et conservatifs. Une analyse du taux de convergence des algorithmes est aussi realisee afin de degager les forces et les limites de ces schemes numeriques. Les methodes de detection que nous utilisons reposent sur une transformation particuliere de la dynamique initiale. Cette astuce nous a inspire une methode alternative pour cibler et stabiliser une orbite periodique quelconque dans un systeme chaotique. Le ciblage est en general combine aux methodes de controle pour stabiliser rapidement un cycle donne. En general, il faut connaitre la position et la stabilite du cycle en question. La nouvelle methode de ciblage que nous presentons ne demande pas de connaitre a priori la position et la stabilite des orbites periodiques. Elle pourrait etre un outil complementaire aux methodes de ciblage et de controle actuelles.

Dynamique de nanobulles et nanoplasmas generes autour de nanoparticules plasmoniques irradiees par des impulsions ultracourtes

NASA Astrophysics Data System (ADS)

Dagallier, Adrien

L'emergence des lasers a impulsion ultrabreves et des nanotechnologies a revolutionne notre perception et notre maniere d'interagir avec l'infiniment petit. Les gigantesques intensites generees par ces impulsions plus courtes que les temps de relaxation ou de diffusion du milieu irradie induisent de nombreux phenomenes non-lineaires, du doublement de frequence a l'ablation, dans des volumes de dimension caracteristique de l'ordre de la longueur d'onde du laser. En biologie et en medecine, ces phenomenes sont utilises a des fins d'imagerie multiphotonique ou pour detruire des tissus vivants. L'introduction de nanoparticules plasmoniques, qui concentrent le champ electromagnetique incident dans des regions de dimensions nanometriques, jusqu'a une fraction de la longueur d'onde, amplifie les phenomenes non-lineaires tout en offrant un controle beaucoup plus precis de la deposition d'energie, ouvrant la voie a la detection de molecules individuelles en solution et a la nanochirurgie. La nanochirurgie repose principalement sur la formation d'une bulle de vapeur a proximite d'une membrane cellulaire. Cette bulle de vapeur perce la membrane de maniere irreversible,entrainant la cellule a sa mort, ou la perturbe temporairement, ce qui permet d'envisager de faire penetrer dans la cellule des medicaments ou des brins d'ADN pour de la therapie genique. C'est principalement la taille de la bulle qui va decider de l'issue de l'irradiation laser. Il est donc necessaire de controler finement les parametres du laser et la geometrie de la nanoparticule afin d'atteindre l'objectif fixe. Le moyen le plus direct a l'heure actuelle de valider un ensemble de conditions experimentales est de realiser l'experience en laboratoire,ce qui est long et couteux. Les modeles de dynamique de bulle existants ne prennent pas en compte les parametres de l'irradiation et ajustent souvent leurs conditions initiales a partir de leurs mesures experimentales, ce qui limite la portee du modele au cas pour lequel il est ecrit. Ce memoire se propose de predire la taille maximale ainsi que la dynamique des bulles generees par des impulsions ultrabreves en fonction uniquement de la geometrie de la particule et des parametres du laser, entre autres la duree de pulse, la longueur d'onde centrale et la fluence d'irradiation.

Une alternative au cobalt pour la synthese de nanotubes de carbone monoparoi par plasma inductif thermique

NASA Astrophysics Data System (ADS)

Carrier, Jean-Francois

Les nanotubes de carbone de type monoparoi (C-SWNT) sont une classe recente de nanomateriaux qui ont fait leur apparition en 1991. L'interet qu'on leur accorde provient des nombreuses proprietes d'avant-plan qu'ils possedent. Leur resistance mecanique serait des plus rigide, tout comme ils peuvent conduire l'electricite et la chaleur d'une maniere inegalee. Non moins, les C-SWNT promettent de devenir une nouvelle classe de plateforme moleculaire, en servant de site d'attache pour des groupements reactifs. Les promesses de ce type particulier de nanomateriau sont nombreuses, la question aujourd'hui est de comment les realiser. La technologie de synthese par plasma inductif thermique se situe avantageusement pour la qualite de ses produits, sa productivite et les faibles couts d'operation. Par contre, des recherches recentes ont permis de mettre en lumiere des risques d'expositions reliees a l'utilisation du cobalt, comme catalyseur de synthese; son elimination ou bien son remplacement est devenu une preoccupation importante. Quatre recettes alternatives ont ete mises a l'essai afin de trouver une alternative plus securitaire a la recette de base; un melange catalytique ternaire, compose de nickel, de cobalt et d'oxyde d'yttrium. La premiere consiste essentiellement a remplacer la proportion massique de cobalt par du nickel, qui etait deja present dans la recette de base. Les trois options suivantes contiennent de nouveaux catalyseurs, en remplacement au Co, qui sont apparus dans plusieurs recherches scientifiques au courant des dernieres annees: le dioxyde de zircone (ZrO2), dioxyde de manganese (MnO2) et le molybdene (Mo). La methode utilisee consiste a vaporiser la matiere premiere, sous forme solide, dans un reacteur plasma a haute frequence (3 MHz) a paroi refroidi. Apres le passage dans le plasma, le systeme traverse une section dite de "croissance", isolee thermiquement a l'aide de graphite, afin de maintenir une certaine plage de temperature favorable a la synthese de C-SWNT. Le produit final est par la suite recolte sur des filtres metalliques poreux, une fois le systeme mis a l'arret. Dans un premier temps, une analyse thermodynamique, calculee avec le logiciel Fact-Sage, a permis de mettre en lumiere l'etat des differentes produits et reactifs, tout au long de leur passage dans le systeme. Elle a permis de reveler la similitude de composition de la phase liquide du melange catalytique ternaire de base, avec celui du melange binaire, avec nickel et oxyde d'yttrium. Par la suite, une analyse du bilan d'energie, a l'aide d'un systeme d'acquisition de donnees, a permis de determiner que les conditions operatoires des cinq echantillons mis a l'essai etaient similaires. Au total, le produit final a ete caracterise a l'aide de six methodes de caracterisations differentes : l'analyse thermogravimetrique, la diffraction de rayons X, la microscopie electronique a balayage a haute resolution (HRSEM), la microscopie electronique a transmission (MET), la spectroscopie RAMAN, ainsi que la mesure de la surface specifique (BET). Les resultats de ces analyses ont permis de constater, de facon coherente, que le melange a base de molybdene etait celui qui produisait la moins bonne qualite de produit. Ensuite, en ordre croissant, s'en suivait du melange a base de MnO2 et de ZrO2. Le melange de reference, a base de cobalt, est au deuxieme rang en matiere de qualite. La palme revient au melange binaire, dont la proportion est double en nickel. Les resultats de ce travail de recherche permettent d'affirmer qu'il existe une alternative performante au cobalt pour effectuer la synthese de nanotubes de carbone monoparoi, par plasma inductif thermique. Cette alternative est l'utilisation d'un melange catalytique binaire a base de nickel et d'oxyde d'yttrium. Il est suggere que les performances plus faibles des recettes alternatives, moins performantes, pourraient etre expliquees par le profil thermique fixe du reacteur. Ceci pourrait favoriser certains melanges, au detriment des autres, qui possedent des proprietes thermodynamiques differentes. Le montage, l'equipement, ainsi que les parametres d'operations, pourraient etre modifies en fonction de ces catalyseurs afin d'optimiser la synthese. Mots cles : nanotubes de carbone mono paroi, plasma inductif thermique, cobalt, nickel, dioxyde de zirconium, dioxyde de manganese, molybdene, trioxyde d'yttrium et noir de carbone

Weak lensing in the Dark Energy Survey

NASA Astrophysics Data System (ADS)

Troxel, Michael

2016-03-01

I will present the current status of weak lensing results from the Dark Energy Survey (DES). DES will survey 5000 square degrees in five photometric bands (grizY), and has already provided a competitive weak lensing catalog from Science Verification data covering just 3% of the final survey footprint. I will summarize the status of shear catalog production using observations from the first year of the survey and discuss recent weak lensing science results from DES. Finally, I will report on the outlook for future cosmological analyses in DES including the two-point cosmic shear correlation function and discuss challenges that DES and future surveys will face in achieving a control of systematics that allows us to take full advantage of the available statistical power of our shear catalogs.

H2/H∞ control for grid-feeding converter considering system uncertainty

NASA Astrophysics Data System (ADS)

Li, Zhongwen; Zang, Chuanzhi; Zeng, Peng; Yu, Haibin; Li, Shuhui; Fu, Xingang

2017-05-01

Three-phase grid-feeding converters are key components to integrate distributed generation and renewable power sources to the power utility. Conventionally, proportional integral and proportional resonant-based control strategies are applied to control the output power or current of a GFC. But, those control strategies have poor transient performance and are not robust against uncertainties and volatilities in the system. This paper proposes a H2/H∞-based control strategy, which can mitigate the above restrictions. The uncertainty and disturbance are included to formulate the GFC system state-space model, making it more accurate to reflect the practical system conditions. The paper uses a convex optimisation method to design the H2/H∞-based optimal controller. Instead of using a guess-and-check method, the paper uses particle swarm optimisation to search a H2/H∞ optimal controller. Several case studies implemented by both simulation and experiment can verify the superiority of the proposed control strategy than the traditional PI control methods especially under dynamic and variable system conditions.

Methods of increasing the performance of radionuclide generators used in nuclear medicine: daughter nuclide build-up optimisation, elution-purification-concentration integration, and effective control of radionuclidic purity.

PubMed

Le, Van So; Do, Zoe Phuc-Hien; Le, Minh Khoi; Le, Vicki; Le, Natalie Nha-Truc

2014-06-10

Methods of increasing the performance of radionuclide generators used in nuclear medicine radiotherapy and SPECT/PET imaging were developed and detailed for 99Mo/99mTc and 68Ge/68Ga radionuclide generators as the cases. Optimisation methods of the daughter nuclide build-up versus stand-by time and/or specific activity using mean progress functions were developed for increasing the performance of radionuclide generators. As a result of this optimisation, the separation of the daughter nuclide from its parent one should be performed at a defined optimal time to avoid the deterioration in specific activity of the daughter nuclide and wasting stand-by time of the generator, while the daughter nuclide yield is maintained to a reasonably high extent. A new characteristic parameter of the formation-decay kinetics of parent/daughter nuclide system was found and effectively used in the practice of the generator production and utilisation. A method of "early elution schedule" was also developed for increasing the daughter nuclide production yield and specific radioactivity, thus saving the cost of the generator and improving the quality of the daughter radionuclide solution. These newly developed optimisation methods in combination with an integrated elution-purification-concentration system of radionuclide generators recently developed is the most suitable way to operate the generator effectively on the basis of economic use and improvement of purposely suitable quality and specific activity of the produced daughter radionuclides. All these features benefit the economic use of the generator, the improved quality of labelling/scan, and the lowered cost of nuclear medicine procedure. Besides, a new method of quality control protocol set-up for post-delivery test of radionuclidic purity has been developed based on the relationship between gamma ray spectrometric detection limit, required limit of impure radionuclide activity and its measurement certainty with respect to optimising decay/measurement time and product sample activity used for QC quality control. The optimisation ensures a certainty of measurement of the specific impure radionuclide and avoids wasting the useful amount of valuable purified/concentrated daughter nuclide product. This process is important for the spectrometric measurement of very low activity of impure radionuclide contamination in the radioisotope products of much higher activity used in medical imaging and targeted radiotherapy.

Decreased Desmin expression in the developing diaphragm of the nitrofen-induced congenital diaphragmatic hernia rat model.

PubMed

Takahashi, Toshiaki; Friedmacher, Florian; Zimmer, Julia; Puri, Prem

2016-12-01

Congenital diaphragmatic hernia (CDH) is presumed to originate from defects in the primordial diaphragmatic mesenchyme, mainly comprising of muscle connective tissue (MCT). Thus, normal diaphragmatic morphogenesis depends on the structural integrity of the underlying MCT. Developmental mutations that inhibit normal formation of diaphragmatic MCT have been shown to result in CDH. Desmin (DES) is a major filament protein in the MCT, which is essential for the tensile strength of the developing diaphragm muscle. DES -/- knockout mice exhibit significant reductions in stiffness and elasticity of the developing diaphragmatic muscle tissue. Furthermore, sequence changes in the DES gene have recently been identified in human cases of CDH, suggesting that alterations in DES expression may lead to diaphragmatic defects. This study was designed to investigate the hypothesis that diaphragmatic DES expression is decreased in fetal rats with nitrofen-induced CDH. Time-mated Sprague-Dawley rats were exposed to either nitrofen or vehicle on gestational day 9 (D9). Fetuses were harvested on selected time-points D13, D15 and D18, and dissected diaphragms (n = 72) were divided into control and nitrofen-exposed specimens (n = 12 per time-point and experimental group, respectively). Laser-capture microdissection was used to obtain diaphragmatic tissue elements. Diaphragmatic gene expression of DES was analyzed by quantitative real-time polymerase chain reaction. Immunofluorescence double staining for DES was combined with the mesenchymal marker GATA4 to evaluate protein expression and localization in developing fetal diaphragms. Relative mRNA expression levels of DES were significantly decreased in pleuroperitoneal folds on D13 (1.49 ± 1.79 vs. 3.47 ± 2.32; p < 0.05), developing diaphragms on D15 (1.49 ± 1.41 vs. 3.94 ± 3.06; p < 0.05) and fully muscularized diaphragms on D18 (2.45 ± 1.47 vs. 5.12 ± 3.37; p < 0.05) of nitrofen-exposed fetuses compared to controls. Confocal laser scanning microscopy demonstrated markedly diminished immunofluorescence of DES mainly in diaphragmatic MCT, which was associated with a reduction of proliferating mesenchymal cells in nitrofen-exposed fetuses on D13, D15 and D18 compared to controls. Decreased expression of DES in the fetal diaphragm may disturb the basic integrity of myofibrils and the cytoskeletal network during myogenesis, causing malformed MCT and leading to diaphragmatic defects in the nitrofen-induced CDH model.

Modelling of enterobacterial loads to the Baie des Veys (Normandy, France).

PubMed

Lafforgue, Michel; Gerard, Laure; Vieillard, Celine; Breton, Marguerite

2018-06-01

The Baie des Veys (Normandy, France) has abundant stocks of shellfish (oyster and cockle farms). Water quality in the bay is affected by pollutant inputs from a 3500 km 2 watershed and notably occasional episodes of contamination by faecal coliforms. In order to characterise enterobacterial loads and develop a plan of action to improve the quality of seawater and shellfish in the bay, a two-stage modelling procedure was adopted. This focused on Escherichia coli and included a catchment model describing the E. coli releases, and the transport and die-off of this bacteria up to the coast. The output from this model then served as input for a marine model used to determine the concentration of E. coli in seawater. A total 60 scenarios were tested, including different wind, tidal, rainfall and temperature conditions and accidental pollution events, for both current situations and future scenarios. The modelling results highlighted the impact of rainfall on E. coli loadings to the sea, as well as the effects of sluice gates and tidal cycles, which dictated the use of an hourly timescale for the modelling process. The coupled models also made it possible to identify the origin of these enterobacteria as found in shellfish harvesting areas, both in terms of the contributing watercourses and the sources of contamination of those watercourses. The tool can accordingly be used to optimise remedial action. Copyright © 2018 Elsevier GmbH. All rights reserved.

Cost Effective and Affordable Guidance and Control Systems.

DTIC Science & Technology

1985-02-01

aider A is mpdcification. En bref La ligns I spdcifie l’erreur do position absolue (coordonnles terrestres ) A long terme souheitde pour le syst~me do...suffit de" passer aur des rspbres terrestres convenus li 1’svance). Vest Ia raison pour laquolle cette solution est habituellement retenue. Elie...guidage, mime largu~es de fagon trbs prdcise par les calculateurs des avions modernes sur des objectifs terrestres fixes. La confiance misc depuis dans le

Resistance of Aëdes aegypti to certain chlorinated hydrocarbon and organo-phosphorus insecticides in Puerto Rico*

PubMed Central

Fox, Irving

1961-01-01

Failure to control Aëdes aegypti in Puerto Rico has suggested resistance to the insecticides, particularly DDT. A laboratory colony (named Isla Verde strain) was established from material obtained near the International Airport. This strain proved highly resistant to DDT and dieldrin as well as various other insecticides. The scientific and practical significance of this is far-reaching. Heretofore, it was thought that populations of Aëdes aegypti could be resistant to the DDT group of insecticides or to the dieldrin group but not to both, and that one type of resistance involved biochemical, toxicological and genetic characteristics different from the other. This theory must now be modified or even abandoned. From the practical point of view, it is clear that the continued use of DDT or dieldrin for Aëdes aegypti control in Puerto Rico is questionable, for it is not wise to attempt to overcome high resistance by increasing the concentration or rate of application. Further, the situation demonstrated for Puerto Rico may also obtain in other islands of the Caribbean where Aëdes aegypti is known to be DDT-resistant. PMID:13701099

Do Perceptions of Empowerment Affect Glycemic Control and Self-Care Among Adults with Type 2 Diabetes?

PubMed Central

D’Souza, Melba Sheila; Karkada, Subrahmanya Nairy; Hanrahan, Nancy P.; Venkatesaperumal, Ramesh; Amirtharaj, Anandhi

2015-01-01

Background: The Arab adult with T2DM is understudied with less known facts about the perception of empowerment and its relationship with self-care and glycemic control. Purpose: The purpose of this study was to determine the extent to which perception of empowerment by Arab adults living with Type 2 Diabetes Mellitus (T2DM) was associated with better glycemic control and self-care management. Methods: A cross-sectional descriptive study was led among 300 Arab adults living in Oman with T2DM in an outpatient diabetes clinic. The Diabetes Empowerment Scale (DES), glycosylated haemaglobin (HbA1c) and Body mass index was assessed. The DES was found to be valid and reliable for the population. ANOVA, Regression analysis, and Structural equation modeling was used for analysis. Results: The composite score and three subscales of DES were a significant and strong predictor of good glycemic control among Omani adults with T2DM (p<0.001). Age, education, duration of DM, prior DM education program and medications were significantly associated with DES. Conclusion: Diabetes nurse educators engaged in the care of adults with T2DM should assess self-empowerment and tailor interventions to increase empowerment for better glycemic control. Patient empowerment plays an essential role in maintaining self-care behaviours and HbA1c. PMID:26156908

Patient-specific dosimetric endpoints based treatment plan quality control in radiotherapy.

PubMed

Song, Ting; Staub, David; Chen, Mingli; Lu, Weiguo; Tian, Zhen; Jia, Xun; Li, Yongbao; Zhou, Linghong; Jiang, Steve B; Gu, Xuejun

2015-11-07

In intensity modulated radiotherapy (IMRT), the optimal plan for each patient is specific due to unique patient anatomy. To achieve such a plan, patient-specific dosimetric goals reflecting each patient's unique anatomy should be defined and adopted in the treatment planning procedure for plan quality control. This study is to develop such a personalized treatment plan quality control tool by predicting patient-specific dosimetric endpoints (DEs). The incorporation of patient specific DEs is realized by a multi-OAR geometry-dosimetry model, capable of predicting optimal DEs based on the individual patient's geometry. The overall quality of a treatment plan is then judged with a numerical treatment plan quality indicator and characterized as optimal or suboptimal. Taking advantage of clinically available prostate volumetric modulated arc therapy (VMAT) treatment plans, we built and evaluated our proposed plan quality control tool. Using our developed tool, six of twenty evaluated plans were identified as sub-optimal plans. After plan re-optimization, these suboptimal plans achieved better OAR dose sparing without sacrificing the PTV coverage, and the dosimetric endpoints of the re-optimized plans agreed well with the model predicted values, which validate the predictability of the proposed tool. In conclusion, the developed tool is able to accurately predict optimally achievable DEs of multiple OARs, identify suboptimal plans, and guide plan optimization. It is a useful tool for achieving patient-specific treatment plan quality control.

Directionality compensation for linear multivariable anti-windup synthesis

NASA Astrophysics Data System (ADS)

Adegbege, Ambrose A.; Heath, William P.

2015-11-01

We develop new synthesis procedures for optimising anti-windup control applicable to open-loop exponentially stable multivariable plants subject to hard bounds on the inputs. The optimising anti-windup control falls into a class of compensator commonly termed directionality compensation. The computation of the control involves the online solution of a low-order quadratic programme in place of simple saturation. We exploit the structure of the quadratic programme to incorporate directionality information into the offline anti-windup synthesis using a decoupled architecture similar to that proposed in the literature for anti-windup schemes with simple saturation. We demonstrate the effectiveness of the design compared to several schemes using a simulated example. Preliminary results of this work have been published in the proceedings of the IEEE Conference on Decision and Control, Orlando, 2011 (Adegbege & Heath, 2011a).

Topical administration of Esculetin as a potential therapy for experimental dry eye syndrome.

PubMed

Jiang, D; Liu, X; Hu, J

2017-12-01

PurposeIn this study, we investigated the therapeutic effects of topical Esculetin for dry eye rabbits through the ocular tests, inflammatory factor levels and specific phosphorylated protein expressions of ERK1/2 singnal pathway.Patients and methodsThirty-two healthy adult male New Zealand white rabbits were chosen for the study. DES models were established after removing of the main lacrimal gland, Harderian gland and nictitating membrane in the left eyes and randomly divided into group DES control, group CsA, group Esculetin and group Esculetin combined with CsA (C&E), meanwhile the right eyes served as group Normal control. Schirmer's I tests, fluorescein scores, goblet cell densities, inflammatory cytokines IL-1α,IL-1β,TNF-αlevels were observed by slit-lamp microscope, conjunctival impression cytology and ELISA essay at week 0, 1, 2, 4, 8. Phosphorylated-ERK1/2 expressions were detected in Western blot analysis at week 8.ResultsAfter induction of DES, aqueous tear production and goblet cell density were decreased, FL score was much higher in group DES control throughout the study (P<0.05). Both topical Esculetin and Esculetin combing CsA increased the SIT values (10±1 mm, 14±3 mm, P<0.05) and goblet cell densities (77±12/HP, 92±12/HP, P<0.05), decreased FL scores (7.48±0.33, 5.09±0.24, P<0.05) at week 8. Alternations of IL-1α,IL-1β,TNF-αlevels had similar trend. In Western blot analysis, downregulations of p-ERK1/2 were observed in therapy groups when compared with group DES control and the most decreasing was found in group C&E (P<0.05).ConclusionTopical Esculetin improved DES symptoms, downregulated the inflammatory cytokine expressions, suppressed the ERK1/2 pathway and enhanced the therapeutic effect of CsA.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stone, J.P.; Holtsman, S.; Shellabarger, C.J.

Pellets containing 5 mg (/sup 3/H) diethylstilbestrol (DES) and 15 mg cholesterol were implanted S.C. in 84-day-old female Sprague-Dawley (S-D) and ACl rats. DES was released from the implanted pellets exponentially, and the release was not significantly different in S-D rats than in ACl rats. No mammary tumors developed in any treated or untreated S-D rats. In contrast, 90% of the DES-treated ACl rats developed mammary adenocarcinomas. A significant increase in the weight of the pituitary was noted in DES-treated ACl rats. The pituitarities of the treated ACl rats were 2 to 7 times as heavy as were controls, andmore » plasma prolactin levels were 10 to 40 times higher than in controls. In contrast, the pituitaries of treated S-D rats did not significantly increase in weight, and plasma prolactin levels were only 3 to 5 times higher than controls. The uteri of treated S-D rats were significantly heavier than those of control rats and contained large amounts of fluid. This effect was not seen in ACl rats. Although the release of DES from the implanted pellet was essentially the same in ACl and S-D rats, three distinctive strain differences in response to DES were noted: mammary adenocarcinomas were found only in treated ACl rats; pituitary prolactin-cell adenomas and associated elevated plasma prolactins levels were seen only in treated ACl rats; and pyometritis was induced only in treated S-D rats. Mammary adenocarcinomas and prolactin-cell adenoma responses in the treated ACl rats appear to be correlated with the increasing levels of plasma prolactin. This study demonstrates that the prolonged estrogen treatment of ACl and S-D female rats produces distinctly different mammary and pituitary neoplastic responses. This disparity in neoplastic responses appears to be reflected in the difference of degree to which the hypophysical prolactin cells are stimulated to grow and secrete hormone.« less

Evaluation of Relationship between Obsessive-compulsive Disorder and Dissociative Experiences

PubMed Central

Cetinkaya, Ozlem; Maner, Fulya

2018-01-01

Objective The aim of the study is to evaluate the relationship between obsessive-compulsive disorder (OCD) symptoms and dissociative experiences and the effect of childhood traumatic experiences on this relationship in OCD patients. Methods Fifty consecutive OCD patients and 50 healthy controls are enrolled for this study. Sociodemographic and Clinical Data Form, Dissociative Experiences Scale (DES), Padua Inventory (PI) and Childhood Trauma Questionnaire (CTQ) are applied to participants. Results Average DES total score in the patient group is 20.58 and in the control group it is 4.87. In the patient group, when we evaluate the relation strengths of DES total and subscale scores with PI total score, we found out that amnesia subscale has r=0.361 (p<0.01), absorption subscale has r=0.611 (p<0.01), depersonalization/derealization subscale has r=0.574 (p<0.01), and DES total score has r=0.55 (p<0.01) relation strengths with PI total score. In patient group both DES total score and CTQ total score have influence on PI total score independently from each other. In addition to this, the level of the influence of DES total scores on PI total scores is, R2=0.399 (p<0.01) and the level of the influence of CTQ total scores on PI total scores is R2=0.343 (p<0.01). Conclusion Dissociative experiences are seen more frequently in OCD patients than healthy controls. Among dissociative experiences, absorption has stronger relation with OCD symptoms. The relation between OCD and dissociation is independent from and stronger than the relation between childhood traumatic experiences and OCD. PMID:29739129

Anorexia in hemodialysis patients: the possible role of des-acyl ghrelin.

PubMed

Muscaritoli, Maurizio; Molfino, Alessio; Chiappini, Maria Grazia; Laviano, Alessandro; Ammann, Thomas; Spinsanti, Paola; Melchiorri, Daniela; Inui, Akio; Alegiani, Filippo; Rossi Fanelli, Filippo

2007-01-01

Anorexia is frequently found in end-stage renal disease and is a reliable predictor of morbidity and mortality in hemodialysis (HD) patients. The pathogenesis of anorexia is complex and the appetite-modulating hormone ghrelin could be involved. Two forms of circulating ghrelin have been described: acylated ghrelin (<10% of circulating ghrelin) which promotes food intake, and des-acyl ghrelin which induces a negative energy balance. The aim of this cross-sectional study is to clarify whether anorexia and body weight change in HD patients relate to plasma des-acyl ghrelin levels. 34 HD patients and 15 healthy controls were studied. The presence of anorexia was assessed by a questionnaire. Serum des-acyl ghrelin was measured in HD patients and in 15 body mass index-, sex- and age-matched controls by ELISA. Energy intake was assessed by a 3-day dietary diary, and fat-free mass (FFM) was evaluated by body impedance analysis. Data have been statistically analyzed and are presented as mean +/- SD. 14 patients (41%) were found to be anorexic, and 20 patients (59%) non-anorexic. Energy intake (kcal/day) was significantly lower in anorexic than in non-anorexic patients (1,682 +/- 241 vs. 1,972.50 +/- 490; p < 0.05). FFM (%) was lower in anorexic than in non-anorexic patients (65.8 +/- 4.4 vs. 70.9 +/- 8.7; p = 0.05). Plasma des-acyl ghrelin levels (fmol/ml) were significantly higher in HD patients than in controls (214.88 +/- 154.24 vs. 128.93 +/- 51.07; p < 0.05), and in anorexic HD patients than in non-anorexic (301.7 +/- 162.4 vs. 159.1 +/- 115.5; p < 0.01). Anorexia is highly prevalent among HD patients and des-acyl ghrelin could be involved in its pathogenesis. Copyright 2007 S. Karger AG, Basel.

Isotopic micro generators 1 volt; Les microgenerateurs radioisotopiques 1 volt (in French)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bomal, R.; Devin, B.; Delaquaize, P.

1969-07-01

Various configurations for electrical isotopic generators in the milliwatt range are investigated; these generators are not of the classical thermoelectric type. The four following energy conversion method are examined : thermionic, thermo-photovoltaic, radio-voltaic, wired thermoelectric. The calculus has been conducted having in view not the best energy conversion efficiency, but the need to attain directly 1 volt output voltage. High temperature {sup 238}Pu sources (T above 1000 ) are isolated by multi layer thermal insulation material of the Moly/Alumina type. Optimised application is given for number 1 and 2 here above. Thermionic is interesting by its compactness and Wired-thermoelectric ismore » cheap, simple and rugged. Both method do not allow to extend output voltage range far above 1 volt. TPV and RV, can be designed for multi volt application. Radio-voltaic is 1 per cent efficient but irradiation defects in the semiconductor induced by high energy radiations can strongly limit the lifetime of the generator. Isotope sources technology is the determining factor for these micro generators. (author) [French] Cette etude examine les types de generateurs electriques realisables a partir de sources isotopiques en dehors du procede thermoelectrique classique. Les quatre procedes suivants sont examines: thermoionique, thermophoto-voltaique, radiovoltaique, thermoelectrique a fils. Les calculs sont conduits sans souci exagere du rendement de conversion pour aboutir a une puissance electrique delivree de 0,2 a 1 mW sous une tension au moins egale a 1 volt. Le probleme des sources thermiques de {sup 238}Pu a haute temperature (T > 1000 C) est resolu avec une isolation a structure multi-couche moly-alumine. L'optimalisation est calculee en vue d'une utilisation dans les procedes 1 et 2. Le procede 1 est interessant par sa compacite et le procede 4 par sa simplicite, sa robustesse et son prix de revient; mais avec ces deux generateurs on ne peut obtenir plus d'un volt en charge. Les procedes 2 et 3 peuvent delivrer des tensions de plusieurs volts. Le radiovoltaique donne des rendements de 1 pour cent, mais la creation de defauts dans le reseau cristallin du semiconducteur avec les particules de grande energie peut limiter son utilisation. Les performances de ces differents modes de conversion sont conditionnees avant tout par les technologies des sources isotopiques. (auteur)« less

Analyse des interactions energetiques entre un arena et son systeme de refrigeration

NASA Astrophysics Data System (ADS)

Seghouani, Lotfi

La presente these s'inscrit dans le cadre d'un projet strategique sur les arenas finance par le CRSNG (Conseil de Recherche en Sciences Naturelles et en Genie du Canada) qui a pour but principal le developpement d'un outil numerique capable d'estimer et d'optimiser la consommation d'energie dans les arenas et curlings. Notre travail s'inscrit comme une suite a un travail deja realise par DAOUD et coll. (2006, 2007) qui a developpe un modele 3D (AIM) en regime transitoire de l'arena Camilien Houde a Montreal et qui calcule les flux de chaleur a travers l'enveloppe du batiment ainsi que les distributions de temperatures et d'humidite durant une annee meteorologique typique. En particulier, il calcule les flux de chaleur a travers la couche de glace dus a la convection, la radiation et la condensation. Dans un premier temps nous avons developpe un modele de la structure sous la glace (BIM) qui tient compte de sa geometrie 3D, des differentes couches, de l'effet transitoire, des gains de chaleur du sol en dessous et autour de l'arena etudie ainsi que de la temperature d'entree de la saumure dans la dalle de beton. Par la suite le BIM a ete couple le AIM. Dans la deuxieme etape, nous avons developpe un modele du systeme de refrigeration (REFSYS) en regime quasi-permanent pour l'arena etudie sur la base d'une combinaison de relations thermodynamiques, de correlations de transfert de chaleur et de relations elaborees a partir de donnees disponibles dans le catalogue du manufacturier. Enfin le couplage final entre l'AIM +BIM et le REFSYS a ete effectue sous l'interface du logiciel TRNSYS. Plusieurs etudes parametriques on ete entreprises pour evaluer les effets du climat, de la temperature de la saumure, de l'epaisseur de la glace, etc. sur la consommation energetique de l'arena. Aussi, quelques strategies pour diminuer cette consommation ont ete etudiees. Le considerable potentiel de recuperation de chaleur au niveau des condenseurs qui peut reduire l'energie requise par le systeme de ventilation de l'arena a ete mis en evidence. Mots cles. Arena, Systeme de refrigeration, Consommation d'energie, Efficacite energetique, Conduction au sol, Performance annuelle.

Implementation en VHDl/FPGA d'afficheur video numerique (AVN) pour des applications aerospatiales

NASA Astrophysics Data System (ADS)

Pelletier, Sebastien

L'objectif de ce projet est de developper un controleur video en langage VHDL afin de remplacer la composante specialisee presentement utilisee chez CMC Electronique. Une recherche approfondie des tendances et de ce qui se fait actuellement dans le domaine des controleurs video est effectuee afin de definir les specifications du systeme. Les techniques d'entreposage et d'affichage des images sont expliquees afin de mener ce projet a terme. Le nouveau controleur est developpe sur une plateforme electronique possedant un FPGA, un port VGA et de la memoire pour emmagasiner les donnees. Il est programmable et prend peu d'espace dans un FPGA, ce qui lui permet de s'inserer dans n'importe quelle nouvelle technologie de masse a faible cout. Il s'adapte rapidement a toutes les resolutions d'affichage puisqu'il est modulaire et configurable. A court terme, ce projet permettra un controle ameliore des specifications et des normes de qualite liees aux contraintes de l'avionique.

An analytical fuzzy-based approach to ?-gain optimal control of input-affine nonlinear systems using Newton-type algorithm

NASA Astrophysics Data System (ADS)

Milic, Vladimir; Kasac, Josip; Novakovic, Branko

2015-10-01

This paper is concerned with ?-gain optimisation of input-affine nonlinear systems controlled by analytic fuzzy logic system. Unlike the conventional fuzzy-based strategies, the non-conventional analytic fuzzy control method does not require an explicit fuzzy rule base. As the first contribution of this paper, we prove, by using the Stone-Weierstrass theorem, that the proposed fuzzy system without rule base is universal approximator. The second contribution of this paper is an algorithm for solving a finite-horizon minimax problem for ?-gain optimisation. The proposed algorithm consists of recursive chain rule for first- and second-order derivatives, Newton's method, multi-step Adams method and automatic differentiation. Finally, the results of this paper are evaluated on a second-order nonlinear system.

Control allocation-based adaptive control for greenhouse climate

NASA Astrophysics Data System (ADS)

Su, Yuanping; Xu, Lihong; Goodman, Erik D.

2018-04-01

This paper presents an adaptive approach to greenhouse climate control, as part of an integrated control and management system for greenhouse production. In this approach, an adaptive control algorithm is first derived to guarantee the asymptotic convergence of the closed system with uncertainty, then using that control algorithm, a controller is designed to satisfy the demands for heat and mass fluxes to maintain inside temperature, humidity and CO2 concentration at their desired values. Instead of applying the original adaptive control inputs directly, second, a control allocation technique is applied to distribute the demands of the heat and mass fluxes to the actuators by minimising tracking errors and energy consumption. To find an energy-saving solution, both single-objective optimisation (SOO) and multiobjective optimisation (MOO) in the control allocation structure are considered. The advantage of the proposed approach is that it does not require any a priori knowledge of the uncertainty bounds, and the simulation results illustrate the effectiveness of the proposed control scheme. It also indicates that MOO saves more energy in the control process.

Collaboration for Land, Air, Sea, and Space Vehicles: Developing the Common Ground in Vehicle Dynamics, System Identification, Control, and Handling Qualities (La collaboration dans le domaine des vehicules terrestres, aeriens, maritimes et spatiaux: L’etablissement d’une approche commune de la dynamique des vehicules, l’identification des systemes, et les qualite’s de controle et de pilotage)

DTIC Science & Technology

2002-11-01

slots in the side of the tail boom, which, by coupling with the predominately downward flow induced by the main rotor , produces “Coanda Effect ” and thus...conduct and promote cooperative research and information exchange. The objective is to support the development and effective use of national defence...decision makers. The RTO performs its mission with the support of an extensive network of national experts. It also ensures effective coordination with

Development of ghrelin transgenic mice for elucidation of clinical implication of ghrelin.

PubMed

Aotani, Daisuke; Ariyasu, Hiroyuki; Shimazu-Kuwahara, Satoko; Shimizu, Yoshiyuki; Nomura, Hidenari; Murofushi, Yoshiteru; Kaneko, Kentaro; Izumi, Ryota; Matsubara, Masaki; Kanda, Hajime; Noguchi, Michio; Tanaka, Tomohiro; Kusakabe, Toru; Miyazawa, Takashi; Nakao, Kazuwa

2017-01-01

To elucidate the clinical implication of ghrelin, we have been trying to generate variable models of transgenic (Tg) mice overexpressing ghrelin. We generated Tg mice overexpressing des-acyl ghrelin in a wide variety of tissues under the control of β-actin promoter. While plasma des-acyl ghrelin level in the Tg mice was 44-fold greater than that of control mice, there was no differences in the plasma ghrelin level between des-acyl ghrelin Tg and the control mice. The des-acyl ghrelin Tg mice exhibited the lower body weight and the shorter body length due to modulation of GH-IGF-1 axis. We tried to generate Tg mice expressing a ghrelin analog, which possessed ghrelin-like activity (Trp 3 -ghrelin Tg mice). The plasma Trp 3 -ghrelin concentration in Trp 3 -ghrelin Tg mice was approximately 85-fold higher than plasma ghrelin (acylated ghrelin) concentration seen in the control mice. Because Trp 3 -ghrelin is approximately 24-fold less potent than ghrelin, the plasma Trp 3 -ghrelin concentration in Trp 3 -ghrelin Tg mice was calculated to have approximately 3.5-fold biological activity greater than that of ghrelin (acylated ghrelin) in the control mice. Trp 3 -ghrelin Tg mice did not show any phenotypes except for reduced insulin sensitivity in 1-year old. After the identification of ghrelin O-acyltransferase (GOAT), we generated doubly Tg mice overexpressing both mouse des-acyl ghrelin and mouse GOAT in the liver by cross-mating the two kinds of Tg mice. The plasma ghrelin concentration of doubly Tg mice was approximately 2-fold higher than that of the control mice. No apparent phenotypic changes in body weight and food intake were observed in doubly Tg mice. Further studies are ongoing in our laboratory to generate Tg mice with the increased plasma ghrelin level to a greater extent. The better understanding of physiological and pathophysiological significance of ghrelin from experiments using an excellent animal model may provide a new therapeutic approach for human diseases.

Optimisation of plant protein and transglutaminase content in novel beef restructured steaks for older adults by central composite design.

PubMed

Baugreet, Sephora; Kerry, Joseph P; Brodkorb, André; Gomez, Carolina; Auty, Mark; Allen, Paul; Hamill, Ruth M

2018-08-01

With the goal of optimising a protein-enriched restructured beef steak targeted at the nutritional and chemosensory requirements of older adults, technological performance of thirty formulations, containing plant-based ingredients, pea protein isolate (PPI), rice protein (RP) and lentil flour (LF) with transglutaminase (TG) to enhance binding of meat pieces, were analysed. Maximal protein content of 28% in cooked product was achieved with PPI, RP and LF. Binding strength was primarily affected by TG, while textural parameters were improved with LF inclusion. Optimal formulation (F) to obtain a protein-enriched steak with lowest hardness values was achieved with TG (2%), PPI (8%), RP (9.35%) and LF (4%). F, F1S (optimal formulation 1 with added seasoning) and control restructured products (not containing plant proteins or seasonings) were scored by 120 consumers' aged over-65 years. Controls were most preferred (P < .05), while F1S were least liked by the older consumers. Consumer testing suggests further refinement and optimisation of restructured products with plant proteins should be undertaken. Copyright © 2018 Elsevier Ltd. All rights reserved.

75 FR 9279 - Proposed Information Collection (Survey of Satisfaction With the Disability Evaluation System...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-01

... DEPARTMENT OF VETERANS AFFAIRS [OMB Control No. 2900-New (DES)] Proposed Information Collection (Survey of Satisfaction With the Disability Evaluation System (DES)) Activity: Comment Request AGENCY... use of other forms of information technology. Title: Survey of Satisfaction with the Disability...

Synthese de champs sonores adaptative

NASA Astrophysics Data System (ADS)

Gauthier, Philippe-Aubert

La reproduction de champs acoustiques est une approche physique au probleme technologique de la spatialisation sonore. Cette these concerne l'aspect physique de la reproduction de champs acoustiques. L'objectif principal est l'amelioration de la reproduction de champs acoustiques par "synthese de champs acoustiques" ("Wave Field Synthesis", WFS), une approche connue, basee sur des hypotheses de champ libre, a l'aide du controle actif par l'ajout de capteurs de l'erreur de reproduction et d'une boucle fermee. Un premier chapitre technique (chapitre 4) expose les resultats d'appreciation objective de la WFS par simulations et mesures experimentales. L'effet indesirable de la salle de reproduction sur les qualites objectives de la WFS fut illustre. Une premiere question de recherche fut ensuite abordee (chapitre 5), a savoir s'il est possible de reproduire des champs progressifs en salle dans un paradigme physique de controle actif: cette possibilite fut prouvee. L'approche technique privilegiee, "synthese de champs adaptative" ("Adaptive Wave Field Synthesis" [AWFS]), fut definie, puis simulee (chapitre 6). Cette approche d'AWFS comporte une originalite en controle actif et en reproduction de champs acoustiques: la fonction cout quadratique representant la minimisation des erreurs de reproduction inclut une regularisation de Tikhonov avec solution a priori qui vient de la WFS. L'etude de l'AWFS a l'aide de la decomposition en valeurs singulieres (chapitre 7) a permis de comprendre les mecanismes propres a l'AWFS. C'est la deuxieme principale originalite de la these. L'algorithme FXLMS (LMS et reference filtree) est modifie pour l'AWFS (chapitre 8). Le decouplage du systeme par decomposition en valeurs singulieres est illustre dans le domaine du traitement de signal et l'AWFS basee sur le controle independant des modes de rayonnement est simulee (chapitre 8). Ce qui constitue la troisieme originalite principale de cette these. Ces simulations du traitement de signal montrent l'efficacite des algorithmes et la capacite de l'AWFS a attenuer les erreurs attribuables a des reflexions acoustiques. Le neuvieme chapitre presente des resultats experimentaux d'AWFS. L'objectif etait de valider la methode et d'evaluer les performances de l'AWFS. Un autre algorithme prometteur est aussi teste. Les resultats demontrent la bonne marche de l'AWFS et des algorithmes testes. Autant dans le cas de la reproduction de champs harmoniques que dans le cas de la reproduction de champs a large bande, l'AWFS reduit l'erreur de reproduction de la WFS et les effets indesirables causes par les lieux de reproduction.

Optimization of physical conditions for the production of thermostable T1 lipase in Pichia guilliermondii strain SO using response surface methodology.

PubMed

Abu, Mary Ladidi; Nooh, Hisham Mohd; Oslan, Siti Nurbaya; Salleh, Abu Bakar

2017-11-10

Pichia guilliermondii was found capable of expressing the recombinant thermostable lipase without methanol under the control of methanol dependent alcohol oxidase 1 promoter (AOXp 1). In this study, statistical approaches were employed for the screening and optimisation of physical conditions for T1 lipase production in P. guilliermondii. The screening of six physical conditions by Plackett-Burman Design has identified pH, inoculum size and incubation time as exerting significant effects on lipase production. These three conditions were further optimised using, Box-Behnken Design of Response Surface Methodology, which predicted an optimum medium comprising pH 6, 24 h incubation time and 2% inoculum size. T1 lipase activity of 2.0 U/mL was produced with a biomass of OD 600 23.0. The process of using RSM for optimisation yielded a 3-fold increase of T1 lipase over medium before optimisation. Therefore, this result has proven that T1 lipase can be produced at a higher yield in P. guilliermondii.

Moteurs piézo-électriques à onde progressive : I. Modélisation de la conversion d'énergie mécanique à l'interface stator/rotor

NASA Astrophysics Data System (ADS)

Minotti, P.; Le Moal, P.; Buchaillot, L.; Ferreira, A.

1996-10-01

The modeling of traveling wave type piezoelectric motors involves a large variety of mechanical and physical phenomena and therefore leads to numerous approaches and models. The latter, mainly based on phenomenological and numerical (based on Finite Element Method) analyses, are not suitable for current objectives oriented toward the development of efficient C.A.D. tools. As a result, an attempt is done to investigate analytical approaches, in order to theoretically model the mechanical energy conversion at the stator/rotor interface. This paper is the first in a serie of three articles devoted to the modeling of such rotative motors. After a short description of the operating principles specific to the piezomotors, the mechanical and tribological assumptions made for the driving mechanism of the rotor are briefly described. Then it is shown that the kinematic and dynamic modeling of the stator, combined with the static representation of the stator/rotor interface, gives an efficient way in order to perform the calculation of the loading characteristics of the driving shaft. Finally, the specifications of a new software named C.A.S.I.M.M.I.R.E., which has been recently developed on the basis of our earlier mechanical modeling, are described. In the last of these three papers, the theoretical simulations performed on SHINSEI Japanese motors will show to be close to the experimental data and that the results reported in this paper will lead to the structural optimization of future traveling wave ultrasonic motors. La modélisation des moteurs piézo-électriques à onde progressive implique une grande variété de phénomènes physiques et mécaniques. Cette variété conduit à des approches et modèles tout aussi nombreux et variés, qui reposent principalement sur des analyses phénoménologiques et numériques (Méthode Élements Finis), et ne permettent pas de répondre aux éxigences actuelles concernant le développement d'outils C.A.O. performants. Cette nécessité nous a conduits à développer une modélisation théorique analytique de la conversion d'énergie à l'interface stator/rotor. Ce papier est le premier d'une série de trois articles consacrés à la modélisation des moteurs piézo-électriques rotatifs. Après une rapide description des principes de fonctionnement de ces piézomoteurs, les hypothèses mécaniques et tribologiques concernant le mécanisme d'entraînement du rotor sont énoncées succinctement. On démontre ensuite que la modélisation cinématique et dynamique du stator, combinée à une représentation statique du comportement à l'interface stator/rotor, autorise l'évaluation des caractéristiques en charge des moteurs à onde progressive. Enfin, le logiciel baptisé C.A.S.I.M.M.I.R.E., récemment développé sur la base de la modélisation mécanique précédente, est présenté puis testé. Dans le dernier article de cette série, nous confirmerons la validité des simulations théoriques issues de ce logiciel, à partir de la caractérisation expérimentale de moteurs japonais de la firme SHINSEI. Ce nouveau logiciel constitue d'ores et déjà un outil performant en vue de l'optimisation des futurs moteurs à onde progressive, et a déjà fait l'objet d'une première exploitation en milieu industriel.

Developmental Exposure to Diethylstilbestrol Alters Uterine Gene Expression That May Be Associated With Uterine Neoplasia Later in Life

PubMed Central

Newbold, Retha R.; Jefferson, Wendy N.; Grissom, Sherry F.; Padilla-Banks, Elizabeth; Snyder, Ryan J.; Lobenhofer, Edward K.

2008-01-01

Previously, we described a mouse model where the well-known reproductive carcinogen with estrogenic activity, diethylstilbestrol (DES), caused uterine adenocarcinoma following neonatal treatment. Tumor incidence was dose-dependent reaching >90% by 18 mo following neonatal treatment with 1000 μg/kg/d of DES. These tumors followed the initiation/promotion model of hormonal carcinogenesis with developmental exposure as initiator, and exposure to ovarian hormones at puberty as the promoter. To identify molecular pathways involved in DES-initiation events, uterine gene expression profiles were examined in prepubertal mice exposed to DES (1, 10, or 1000 μg/kg/d) on days 1–5 and compared to controls. Of more than 20 000 transcripts, approximately 3% were differentially expressed in at least one DES treatment group compared to controls; some transcripts demonstrated dose–responsiveness. Assessment of gene ontology annotation revealed alterations in genes associated with cell growth, differentiation, and adhesion. When expression profiles were compared to published studies of uteri from 5-d-old DES-treated mice, or adult mice treated with 17β estradiol, similarities were seen suggesting persistent differential expression of estrogen responsive genes following developmental DES exposure. Moreover, several altered genes were identified in human uterine adenocarcinomas. Four altered genes [lactotransferrin (Ltf), transforming growth factor beta inducible (Tgfb1), cyclin D1 (Ccnd1), and secreted frizzled-related protein 4 (Sfrp4)], selected for real-time RT-PCR analysis, correlated well with the directionality of the microarray data. These data suggested altered gene expression profiles observed 2 wk after treatment ceased, were established at the time of developmental exposure and maybe related to the initiation events resulting in carcinogenesis. PMID:17394237

Developmental exposure to diethylstilbestrol alters uterine gene expression that may be associated with uterine neoplasia later in life.

PubMed

Newbold, Retha R; Jefferson, Wendy N; Grissom, Sherry F; Padilla-Banks, Elizabeth; Snyder, Ryan J; Lobenhofer, Edward K

2007-09-01

Previously, we described a mouse model where the well-known reproductive carcinogen with estrogenic activity, diethylstilbestrol (DES), caused uterine adenocarcinoma following neonatal treatment. Tumor incidence was dose-dependent reaching >90% by 18 mo following neonatal treatment with 1000 microg/kg/d of DES. These tumors followed the initiation/promotion model of hormonal carcinogenesis with developmental exposure as initiator, and exposure to ovarian hormones at puberty as the promoter. To identify molecular pathways involved in DES-initiation events, uterine gene expression profiles were examined in prepubertal mice exposed to DES (1, 10, or 1000 microg/kg/d) on days 1-5 and compared to controls. Of more than 20 000 transcripts, approximately 3% were differentially expressed in at least one DES treatment group compared to controls; some transcripts demonstrated dose-responsiveness. Assessment of gene ontology annotation revealed alterations in genes associated with cell growth, differentiation, and adhesion. When expression profiles were compared to published studies of uteri from 5-d-old DES-treated mice, or adult mice treated with 17beta estradiol, similarities were seen suggesting persistent differential expression of estrogen responsive genes following developmental DES exposure. Moreover, several altered genes were identified in human uterine adenocarcinomas. Four altered genes [lactotransferrin (Ltf), transforming growth factor beta inducible (Tgfb1), cyclin D1 (Ccnd1), and secreted frizzled-related protein 4 (Sfrp4)], selected for real-time RT-PCR analysis, correlated well with the directionality of the microarray data. These data suggested altered gene expression profiles observed 2 wk after treatment ceased, were established at the time of developmental exposure and maybe related to the initiation events resulting in carcinogenesis. (c) 2007 Wiley-Liss, Inc.

Commerce de detail de l'essence automobile: Modelisation de l'impact a court terme des facteurs endogenes et exogenes sur les ventes d'essence dans les stations-service a Montreal

NASA Astrophysics Data System (ADS)

Nguimbus, Raphael

La determination de l'impact des facteurs sous controle et hors controle qui influencent les volumes de vente des magasins de detail qui vendent des produits homogenes et fortement substituables constitue le coeur de cette these. Il s'agit d'estimer un ensemble de coefficients stables et asymtotiquement efficaces non correles avec les effets specifiques aleatoires des sites d'essence dans le marche de Montreal (Quebec, Canada) durant is periode 1993--1997. Le modele econometrique qui est ainsi specifie et teste, isole un ensemble de quatre variables dont le prix de detail affiche dans un site d'essence ordinaire, la capacite de service du site pendant les heures de pointe, les heures de service et le nombre de sites concurrents au voisinage du site dans un rayon de deux kilometres. Ces quatre facteurs influencent les ventes d'essence dans les stations-service. Les donnees en panel avec les methodes d'estimation robustes (estimateur a distance minimale) sont utilisees pour estimer les parametres du modele de vente. Nous partons avec l'hypothese generale selon laquelle il se developpe une force d'attraction qui attire les clients automobilistes dans chaque site, et qui lui permet de realiser les ventes. Cette capacite d'attraction varie d'un site a un autre et cela est du a la combinaison de l'effort marketing et de l'environnement concurrentiel autour du site. Les notions de voisinage et de concurrence spatiale expliquent les comportements des decideurs qui gerent les sites. Le but de cette these est de developper un outil d'aide a la decision (modele analytique) pour permettre aux gestionnaires des chaines de stations-service d'affecter efficacement les ressources commerciales dans ies points de vente.

Safety and efficacy of the next generation Resolute Onyx zotarolimus-eluting stent: Primary outcome of the RESOLUTE ONYX core trial.

PubMed

Price, Matthew J; Shlofmitz, Richard A; Spriggs, Douglas J; Haldis, Thomas A; Myers, Paul; Popma Almonacid, Alexandra; Maehara, Akiko; Dauler, Michelle; Peng, Yun; Mehran, Roxana

2017-09-23

To assess the safety and efficacy of the novel Resolute (R-) Onyx drug-eluting stent (DES). The R-Onyx DES consists of a composite wire with an outer shell of cobalt chromium alloy and a platinum-iridium inner core to enhance radiopacity, with thinner, swaged struts and modified stent geometry compared with the predicate Resolute DES, resulting in a slightly lower total drug load in most sizes. This was a prospective, single-arm non-inferiority trial compared with a historical control. Patients with stable angina/ischemia and up to 2 de novo target lesions ≤35 mm long with reference vessel diameter (RVD) of 2.25-4.2 mm were enrolled. The primary endpoint was late lumen loss at 8-month follow-up. Propensity-score adjusted outcomes from the single-arm RESOLUTE-US trial served as the control. Seventy-five patients (85 lesions) were enrolled. Mean patient age was 66 ± 9 years, 73% were male, and 32% had diabetes. Mean lesion length was 14.28 ± 6.68 mm, mean RVD was 2.57 ± 0.48 mm, and 86% of lesions were class B2/C. In-stent late lumen loss at 8 months was 0.24 ± 0.39 mm with R-Onyx DES compared with 0.36 ± 0.52 mm with Resolute DES (P < 0.001 for noninferiority, P = 0.029 for superiority). At 8 months, clinically driven target lesion revascularization occurred in 3 patients (4.0%) and target lesion failure occurred in 5 patients (6.7%). In-stent late lumen loss is non-inferior, and appears to be superior, with the thin-strut novel composite wire R-Onyx DES compared with Resolute DES. Continued evolution of stent design can improve angiographic outcomes in complex lesions, even in the current era of next-generation DES. © 2017 Wiley Periodicals, Inc.

Revetements nanostructures pour la protection des metaux dans les environnements marins

NASA Astrophysics Data System (ADS)

Brassard, Jean-Denis

L'objectif de cette recherche est de verifier qu'un materiau superhydrophobe peut diminuer l'adherence et l'accumulation de la glace tout en conservant de bonnes proprietes anticorrosion. Afin de verifier cette assertion, trois familles de nouveaux revetements micros et nanostructures, identifiees par les lettres A, B, et C, ont ete developpes de facon a pouvoir en determiner l'efficacite glaciophobe en relation avec l'angle de contact particulier a chaque structure obtenue. Les revetements ont tous ete optimises pour que l'angle de contact et l'adherence au substrat soient maximaux. Les trois revetements optimises sont les suivants: Le revetement A a ete developpe pour application sur l'acier galvanise. Les microrugosites creees sont celles de la structure de la couche du zinc electrodepose en surface et les nanorugosites sont celles creees par le film de silicone copolymerise nanostructure. Un temps optimal de 10 min a ete retenu pour l'electrodeposition du zinc, ce dernier maximisant l'angle de contact a 155° lorsqu'enduit d'un film de silicone de 100 nm d'epaisseur. Le revetement B a ete developpe pour application sur un alliage d'aluminium. Les microrugosites creees sont celles de la microstructure granulaire obtenue par gravure de l'aluminium immerge dans un bain de HCl et les nanorugosites sont celles creees d'un meme film nanostructure de silicone copolymerise. La valeur optimale du temps de gravure est de 8 minutes et donne l'angle de contact le plus eleve a 154°, lorsqu'enduit du meme film de silicone de 100 nm d'epaisseur depose sur le revetement A. Le revetement C a ete developpe pour etre applique indifferemment sur tout substrat degraisse d'aluminium ou d'acier. Les microrugosites et les nanorugosites sont celles creees par les agregats de nanoparticules de ZnO rendues hydrophobes melangees au silicone qui sont pulverisees sur une couche d'appret composee de silicone et de polymethylhydrosiloxane. On obtient alors un produit composite rigide ou les nanoparticules de ZnO enrobees de silane sont imbriquees dans le reseau nanostructure de silicone copolymerise. Le revetement C produit de cette facon satisfaisait a la norme ASTM d'adherence a un substrat, mais n'est pas superhydrophobe, restant seulement hydrophobe avec un angle de contact reduit de 123°. Tous les revetements optimises developpes montrent un niveau de resistance a la corrosion beaucoup plus eleve que leur substrat tant en polarisation qu'en impedance electrochimique. Toutefois aucune relation entre l'hydrophobicite et le niveau de resistance a la corrosion n'a ete etablie. Il a seulement ete determine que ce sont la nature chimique de l'interface, a savoir ses proprietes electriques en isolation, son hydrophobicite et la presence d'air, de meme que l'epaisseur qui sont les deux aspects essentiels a respecter pour avoir de bonnes proprietes anticorrosion. Les trois revetements A, B, et C ont ete evalues quant a la reduction d'adherence et d'accumulation evaluee dans les environnements givrants rencontres en mer arctique. En premiere position, le revetement superhydrophobe B avec un angle de contact de 154°et un facteur de reduction l'adherence (ARF) de la glace sur l'aluminium de 14 et de la quantite accumulee 5% moindre. En seconde position, le revetement superhydrophobe A avec un angle de contact de 155° et un facteur ARF de 6, lequel n'a pas ete evalue en accumulation; et en troisieme position le revetement hydrophobe C avec un facteur de reduction de 3, lequel ne reduit pas la masse de glace accumulee. Deux mecanismes ont ete trouves responsables de l'adherence a la glace sur les revetements developpes soient: 1. l'effet d'ancrage diminue par la presence de nanorugosites hydrophobes recouvrant les microrugosites pouvant adsorber de l'air et 2. L'effet de la quantite d'air adsorbe dans la structure de l'interface, a savoir que pour des angles de contact egaux, si la quantite d'air augmente dans la microstructure, donc un Rrms plus eleve, ferait que l'adherence serait diminuee. Le fait que le revetement B possede un ARF plus eleve que le revetement A, alors qu'ils ont un angle de contact semblable, a 1° pres, est explique par le fait que la valeur des hauteurs des microrugosites Rrms y est plus elevee. Les essais d'accumulation en embruns marins ont permis d'observer que le revetement superhydrophobe accumulait moins de glace que ceux hydrophobe et hydrophile. Cette diminution peut s'expliquer par le fait que les gouttelettes d'eau surfondues vont rouler sans y adherer a cause de la nature superhydrophobe. (Abstract shortened by ProQuest.).

Cancer risk in men exposed in utero to diethylstilbestrol.

PubMed

Strohsnitter, W C; Noller, K L; Hoover, R N; Robboy, S J; Palmer, J R; Titus-Ernstoff, L; Kaufman, R H; Adam, E; Herbst, A L; Hatch, E E

2001-04-04

An association between prenatal diethylstilbestrol (DES) exposure and cancer in men, especially testicular cancer, has been suspected, but findings from case-control studies have been inconsistent. This study was conducted to investigate the association between prenatal DES exposure and cancer risk in men via prospective follow-up. A total of 3613 men whose prenatal DES exposure status was known were followed from 1978 through 1994. The overall and site-specific cancer incidence rates among the DES-exposed men were compared with those of the unexposed men in the study and with population-based rates. The relative rate (RR) was used to assess the strength of the association between prenatal DES exposure and cancer development. All statistical tests were two-sided. Overall cancer rates among DES-exposed men were similar to those among unexposed men (RR = 1.07; 95% confidence interval [CI] = 0.58 to 1.96) and to national rates (RR = 0.99; 95% CI = 0.65 to 1.44). Testicular cancer may be elevated among DES-exposed men, since the RRs for testicular cancer were 3.05 (95% CI = 0.65 to 22.0) times those of unexposed men in the study and 2.04 (95% CI = 0.82 to 4.20) times those of males in the population-based rates. The higher rate of testicular cancer in the DES-exposed men is, however, also compatible with a chance observation. To date, men exposed to DES in utero do not appear to have an increased risk of most cancers. It remains uncertain, however, whether prenatal DES exposure is associated with testicular cancer.

Dry eyes and AIs: If you don't ask you won't find out.

PubMed

Inglis, Holly; Boyle, Frances M; Friedlander, Michael L; Watson, Stephanie L

2015-12-01

Our objective was to investigate the hypothesis that women on adjuvant aromatase inhibitors (AIs) for treatment of breast cancer have a higher prevalence of dry eye syndrome (DES) compared with controls. Exposure and control groups were recruited. A cross sectional questionnaire-based study was performed. Demographic data and medical histories were collected. The presence of dry eye syndrome was determined by the ocular surface disease index (OSDI). The Functional Assessment of Cancer Treatment - Endocrine Subscale (FACT-ES) was performed to investigate correlations with other side effects of AIs. 93 exposure group and 100 control group questionnaires were included. The groups were similar in all demographic variables. The prevalence of dry eye syndrome was 35% (exposure) and 18% (control) (p < 0.01, OR 2.5). AIs were the only factor associated with dry eyes. The OSDI score was negatively correlated with the total FACT-ES score and positively correlated with duration of treatment. Our study is the first to use a validated questionnaire to assess for DES in this population. DES is significantly more prevalent in women on AIs compared with controls. This is a newly emerging, and easily treated side effect of AIs. Self-reporting of dry eye symptoms underestimates the prevalence of DES with AIs. We recommend routine screening of patients on AIs with the OSDI with the aim of improving patient quality of life and possibly adherence. Copyright © 2015 Elsevier Ltd. All rights reserved.

Codon optimisation to improve expression of a Mycobacterium avium ssp. paratuberculosis-specific membrane-associated antigen by Lactobacillus salivarius.

PubMed

Johnston, Christopher; Douarre, Pierre E; Soulimane, Tewfik; Pletzer, Daniel; Weingart, Helge; MacSharry, John; Coffey, Aidan; Sleator, Roy D; O'Mahony, Jim

2013-06-01

Subunit and DNA-based vaccines against Mycobacterium avium ssp. paratuberculosis (MAP) attempt to overcome inherent issues associated with whole-cell formulations. However, these vaccines can be hampered by poor expression of recombinant antigens from a number of disparate hosts. The high G+C content of MAP invariably leads to a codon bias throughout gene expression. To investigate if the codon bias affects recombinant MAP antigen expression, the open reading frame of a MAP-specific antigen MptD (MAP3733c) was codon optimised for expression against a Lactobacillus salivarius host. Of the total 209 codons which constitute MAP3733c, 172 were modified resulting in a reduced G+C content from 61% for the native gene to 32.7% for the modified form. Both genes were placed under the transcriptional control of the PnisA promoter; allowing controlled heterologous expression in L. salivarius. Expression was monitored using fluorescence microscopy and microplate fluorometry via GFP tags translationally fused to the C-termini of the two MptD genes. A > 37-fold increase in expression was observed for the codon-optimised MAP3733synth variant over the native gene. Due to the low cost and improved expression achieved, codon optimisation significantly improves the potential of L. salivarius as an oral vaccine stratagem against Johne's disease. © 2013 Federation of European Microbiological Societies. Published by John Wiley & Sons Ltd. All rights reserved.

Broca’s Area as a Pre-articulatory Phonetic Encoder: Gating the Motor Program

PubMed Central

Ferpozzi, Valentina; Fornia, Luca; Montagna, Marcella; Siodambro, Chiara; Castellano, Antonella; Borroni, Paola; Riva, Marco; Rossi, Marco; Pessina, Federico; Bello, Lorenzo; Cerri, Gabriella

2018-01-01

The exact nature of the role of Broca’s area in control of speech and whether it is exerted at the cognitive or at the motor level is still debated. Intraoperative evidence of a lack of motor responses to direct electrical stimulation (DES) of Broca’s area and the observation that its stimulation induces a “speech arrest” without an apparent effect on the ongoing activity of phono-articulatory muscles, raises the argument. Essentially, attribution of direct involvement of Broca’s area in motor control of speech, requires evidence of a functional connection of this area with the phono-articulatory muscles’ motoneurons. With a quantitative approach we investigated, in 20 patients undergoing surgery for brain tumors, whether DES delivered on Broca’s area affects the recruitment of the phono-articulatory muscles’ motor units. The electromyography (EMG) of the muscles active during two speech tasks (object picture naming and counting) was recorded during and in absence of DES on Broca’s area. Offline, the EMG of each muscle was analyzed in frequency (power spectrum, PS) and time domain (root mean square, RMS) and the two conditions compared. Results show that DES on Broca’s area induces an intensity-dependent “speech arrest.” The intensity of DES needed to induce “speech arrest” when applied on Broca’s area was higher when compared to the intensity effective on the neighboring pre-motor/motor cortices. Notably, PS and RMS measured on the EMG recorded during “speech arrest” were superimposable to those recorded at baseline. Partial interruptions of speech were not observed. Speech arrest was an “all-or-none” effect: muscle activation started only by removing DES, as if DES prevented speech onset. The same effect was observed when stimulating directly the subcortical fibers running below Broca’s area. Intraoperative data point to Broca’s area as a functional gate authorizing the phonetic translation to be executed by the motor areas. Given the absence of a direct effect on motor units recruitment, a direct control of Broca’s area on the phono-articulatory apparatus seems unlikely. Moreover, the strict correlation between DES-intensity and speech prevention, might attribute this effect to the inactivation of the subcortical fibers rather than to Broca’s cortical neurons. PMID:29520225

Modelling and strategy optimisation for a kind of networked evolutionary games with memories under the bankruptcy mechanism

NASA Astrophysics Data System (ADS)

Fu, Shihua; Li, Haitao; Zhao, Guodong

2018-05-01

This paper investigates the evolutionary dynamic and strategy optimisation for a kind of networked evolutionary games whose strategy updating rules incorporate 'bankruptcy' mechanism, and the situation that each player's bankruptcy is due to the previous continuous low profits gaining from the game is considered. First, by using semi-tensor product of matrices method, the evolutionary dynamic of this kind of games is expressed as a higher order logical dynamic system and then converted into its algebraic form, based on which, the evolutionary dynamic of the given games can be discussed. Second, the strategy optimisation problem is investigated, and some free-type control sequences are designed to maximise the total payoff of the whole game. Finally, an illustrative example is given to show that our new results are very effective.

Optimisation of novel method for the extraction of steviosides from Stevia rebaudiana leaves.

PubMed

Puri, Munish; Sharma, Deepika; Barrow, Colin J; Tiwary, A K

2012-06-01

Stevioside, a diterpene glycoside, is well known for its intense sweetness and is used as a non-caloric sweetener. Its potential widespread use requires an easy and effective extraction method. Enzymatic extraction of stevioside from Stevia rebaudiana leaves with cellulase, pectinase and hemicellulase, using various parameters, such as concentration of enzyme, incubation time and temperature, was optimised. Hemicellulase was observed to give the highest stevioside yield (369.23±0.11μg) in 1h in comparison to cellulase (359±0.30μg) and pectinases (333±0.55μg). Extraction from leaves under optimised conditions showed a remarkable increase in the yield (35 times) compared with a control experiment. The extraction conditions were further optimised using response surface methodology (RSM). A central composite design (CCD) was used for experimental design and analysis of the results to obtain optimal extraction conditions. Based on RSM analysis, temperature of 51-54°C, time of 36-45min and the cocktail of pectinase, cellulase and hemicellulase, set at 2% each, gave the best results. Under the optimised conditions, the experimental values were in close agreement with the prediction model and resulted in a three times yield enhancement of stevioside. The isolated stevioside was characterised through 1 H-NMR spectroscopy, by comparison with a stevioside standard. Copyright © 2011 Elsevier Ltd. All rights reserved.

Holonic Approach for Control and Coordination of Distributed Sensors

DTIC Science & Technology

2008-08-01

Kuokka, D. R., Weber, J. C., Tenenbaum, J. M., Gruber, T . R., and Olsen, G . R. (1993), SHADE: Technology for Knowledge-Based Collaborative 70 DRDC...H o l o n i c a p p ro a ch fo r c o n t ro l a n d coordination of distributed sensors A. Benaskeur H. Irandoust DRDC Valcartier Defence R&D...contrôle de la gestion des capteurs, et en par- ticulier les processus de planification des tâches et l’allocation des capteurs, sont discutés en

Efficacy and safety of a biodegradable polymer sirolimus-eluting stent in primary percutaneous coronary intervention: a randomized controlled trial

PubMed Central

Li, Qiang; Tong, Zichuan; Wang, Lefeng; Zhang, Jianjun; Ge, Yonggui; Wang, Hongshi; Li, Weiming; Xu, Li; Ni, Zhuhua

2013-01-01

Introduction With long-term follow-up, whether biodegradable polymer drug-eluting stents (DES) is efficient and safe in primary percutaneous coronary intervention (PCI) remains a controversial issue. This study aims to assess the long-term efficacy and safety of DES in PCI for ST-segment elevation myocardial infarction (STEMI). Material and methods A prospective, randomized single-blind study with 3-year follow-up was performed to compare biodegradable polymer DES with durable polymer DES in 332 STEMI patients treated with primary PCI. The primary end point was major adverse cardiac events (MACE) at 3 years after the procedure, defined as the composite of cardiac death, recurrent infarction, and target vessel revascularization. The secondary end points included in-segment late luminal loss (LLL) and binary restenosis at 9 months and cumulative stent thrombosis (ST) event rates up to 3 years. Results The rate of the primary end points and the secondary end points including major adverse cardiac events, in-segment late luminal loss, binary restenosis, and cumulative thrombotic event rates were comparable between biodegradable polymer DES and durable polymer DES in these 332 STEMI patients treated with primary PCI at 3 years. Conclusions Biodegradable polymer DES has similar efficacy and safety profiles at 3 years compared with durable polymer DES in STEMI patients treated with primary PCI. PMID:24482648

Feedback control methods for drug dosage optimisation. Concepts, classification and clinical application.

PubMed

Vozeh, S; Steimer, J L

1985-01-01

The concept of feedback control methods for drug dosage optimisation is described from the viewpoint of control theory. The control system consists of 5 parts: (a) patient (the controlled process); (b) response (the measured feedback); (c) model (the mathematical description of the process); (d) adaptor (to update the parameters); and (e) controller (to determine optimum dosing strategy). In addition to the conventional distinction between open-loop and closed-loop control systems, a classification is proposed for dosage optimisation techniques which distinguishes between tight-loop and loose-loop methods depending on whether physician's interaction is absent or included as part of the control step. Unlike engineering problems where the process can usually be controlled by fully automated devices, therapeutic situations often require that the physician be included in the decision-making process to determine the 'optimal' dosing strategy. Tight-loop and loose-loop methods can be further divided into adaptive and non-adaptive, depending on the presence of the adaptor. The main application areas of tight-loop feedback control methods are general anaesthesia, control of blood pressure, and insulin delivery devices. Loose-loop feedback methods have been used for oral anticoagulation and in therapeutic drug monitoring. The methodology, advantages and limitations of the different approaches are reviewed. A general feature common to all application areas could be observed: to perform well under routine clinical conditions, which are characterised by large interpatient variability and sometimes also intrapatient changes, control systems should be adaptive. Apart from application in routine drug treatment, feedback control methods represent an important research tool. They can be applied for the investigation of pathophysiological and pharmacodynamic processes. A most promising application is the evaluation of the relationship between an intermediate response (e.g. drug level), which is often used as feedback for dosage adjustment, and the final therapeutic goal.

Numerical Simulation of Adaptive Control Applicaton to Unstable Solid Rocket Motors

DTIC Science & Technology

2001-06-01

la Technologie des Lanceurs "Vi- Sciences Meeting & Exhibit, Reno, Jan. 15-18. bration des Lanceurs , Toulouse", 1999. AIAA Paper 96-0759, 1996. 7-8...Schmidt. Some recent de- in the presence of pipeline acoustic resonance. velopments in numerical methods for transonic J. Fluids and Structures ., 5:207

Structural Aspects of Flexible Aircraft Control (les Aspects structuraux du controle actif et flexible des aeronefs)

DTIC Science & Technology

2000-05-01

est constitude par un .les pressions sur la gouveme et le ensemble de 17 pouts de jauge , de 20 moment de charni~re sont surestimds accildrom~tes, de...avec les corrdlations calcul-essais 130 mm). des rdponses dc jauges de contraintes A 12 Le calcul, comme les essais, permettent chargements statiques...encastrement au mur * 250 capteurs ( pression, jauge , acc~l6romnbtre, fibre optique) gouverne encastrement ~-axe dispositif de s6curit6 ~ guen BLJTEE A JEUl

Air Vehicle Mission Control and Management, The Guidance and Control Panel Symposium (53rd) Held in Amsterdam, The Netherlands on 22-25 October 1991 ((La Gestion et le Controle des Missions des Vehicules Aeriens)

DTIC Science & Technology

1992-03-01

will address this point later, for an even larger proportion of weapon systems. Again a variation in operation that require IV. FUTURE ENVIRONMENTS FOR...the proportion by which sight angle are calculated similarly to the Mach number differs from the instantaneous Paladin aircraft parameters (equations 1...CONCLUSIONS SHORTFALL The proposition that teamworK should be a high- level design driver poses a radical departure from FIGURE 5 - Audit Component Proportions

Command and Control (C2) Agility (Agilite du commandement et du controle (C2))

DTIC Science & Technology

2014-10-01

de la rigueur et de l’emploi des méthodes de mesure et d’amélioration de l’agilité du C2. Le spectre des missions... Control and Intelligence (C2I) Section DRDC Valcartier 2459 de la Bravoure Road Québec (Québec) G3J 1X5 CANADA Email: Micheline.Belanger@drdc...Agilité du commandement et du contrôle (C2) (STO-TR-SAS-085) Synthèse L’agilité est la capacité à effectuer avec succès, s’occuper de

Multiple response optimisation of processing and formulation parameters of pH sensitive sustained release pellets of capecitabine for targeting colon.

PubMed

Pandey, Sonia; Swamy, S M Vijayendra; Gupta, Arti; Koli, Akshay; Patel, Swagat; Maulvi, Furqan; Vyas, Bhavin

2018-04-29

To optimise the Eudragit/Surelease ® -coated pH-sensitive pellets for controlled and target drug delivery to the colon tissue and to avoid frequent high dosing and associated side effects which restrict its use in the colorectal-cancer therapy. The pellets were prepared using extrusion-spheronisation technique. Box-Behnken and 3 2 full factorial designs were applied to optimise the process parameters [extruder sieve size, spheroniser-speed, and spheroniser-time] and the coating levels [%w/v of Eudragit S100/Eudragit-L100 and Surelease ® ], respectively, to achieve the smooth optimised size pellets with sustained drug delivery without prior drug release in upper gastrointestinal tract (GIT). The design proposed the optimised batch by selecting independent variables at; extruder sieve size (X 1  = 1 mm), spheroniser speed (X 2  = 900 revolutions per minute, rpm), and spheroniser time (X 3  = 15 min) to achieve pellet size of 0.96 mm, aspect ratio of 0.98, and roundness 97.42%. The 16%w/v coating strength of Surelease ® and 13%w/v coating strength of Eudragit showed pH-dependent sustained release up to 22.35 h (t 99% ). The organ distribution study showed the absence of the drug in the upper part of GIT tissue and the presence of high level of capecitabine in the caecum and colon tissue. Thus, the presence of Eudragit coat prevent the release of drug in stomach and the inner Surelease ® coat showed sustained drug release in the colon tissue. The study demonstrates the potential of optimised Eudragit/Surelease ® -coated capecitabine-pellets for effective colon-targeted delivery system to avoid frequent high dosing and associated systemic side effects of drug.

Dimensionnement des actionneurs électriques alimentés à fréquence variable sous faible tension

NASA Astrophysics Data System (ADS)

Biedinger, J.-M.; Vilain, J.-P.

1999-09-01

In Part I we present a multidisciplinary analysis model for the prediction of functional connections between the design variables and the electromagnetical, electrical and thermal performances of a brushless permanent magnet motor. In this paper we have elaborated a design methodology for electrical motors supplied from a variable-frequency low-voltage source. The objective is to take into account the influence of the inverter's dynamics from the beginning of the design, for the same reasons as we do for electromechanical and thermal constraints. The procedure is based on a Sequential Quadratic Programming optimization method. Two techniques are used to take into account the influence of the inverter: the first one develops the performance analysis with the multidisciplinary model; the second one considers the inverter's current reference as a supplementary optimization variable for the control of the design. Optimization difficulties linked to the chopping of the converter are discuted in connection with a sensitivity analysis of the torque, with respect to the inverter's current reference; a method is proposed to enhance the performances of the algorithm. The method has been applied to the design of a permanent magnet brushless DC motor used in the propulsion system of an electrical scooter; evolution of the design with the complexity level of analysis model is evidenced. Dans une première partie nous avons développé un modèle d'analyse pluridisciplinaire qui établissait les dépendances fonctionnelles entre les variables de conception et les performances magnéto-électro-thermiques d'un moteur brushless à aimants permanents. Dans cet article nous décrivons une procédure de dimensionnement adaptée à la conception de la machine alimentée à fréquence variable sous faible tension. L'objectif est d'intégrer la dynamique du convertisseur électronique dès la phase initiale du dimensionnement, au même titre que les spécifications électromécaniques et thermiques. La procédure est gérée par une méthode d'optimisation déterministe de type Programmation Quadratique Séquentielle. Elle intègre l'influence du convertisseur au moyen de deux spécificités : la première consiste à évaluer les fonctions du problème d'optimisation sur la base du module d'analyse pluridisciplinaire ; la deuxième permet de contrôler l'évolution du dimensionnement au travers de variables d'optimisation dont la liste inclut les consignes de la commande en courant du convertisseur. Les difficultés d'optimisation liées au mode de fonctionnement discret du convertisseur sont discutées au regard du calcul de la sensibilité du couple électromagnétique envers la consigne de courant du convertisseur ; une méthode est proposée pour assurer la robustesse de la procédure en présence du convertisseur. L'application porte sur le dimensionnement d'un moteur à aimants permanents de type “brushless trapézoïdal" destiné à la traction d'un scooter électrique ; l'évolution de la structure optimale avec le degré de complexité du module d'analyse est mise en évidence.

Prediction du profil de durete de l'acier AISI 4340 traite thermiquement au laser

NASA Astrophysics Data System (ADS)

Maamri, Ilyes

Les traitements thermiques de surfaces sont des procedes qui visent a conferer au coeur et a la surface des pieces mecaniques des proprietes differentes. Ils permettent d'ameliorer la resistance a l'usure et a la fatigue en durcissant les zones critiques superficielles par des apports thermiques courts et localises. Parmi les procedes qui se distinguent par leur capacite en terme de puissance surfacique, le traitement thermique de surface au laser offre des cycles thermiques rapides, localises et precis tout en limitant les risques de deformations indesirables. Les proprietes mecaniques de la zone durcie obtenue par ce procede dependent des proprietes physicochimiques du materiau a traiter et de plusieurs parametres du procede. Pour etre en mesure d'exploiter adequatement les ressources qu'offre ce procede, il est necessaire de developper des strategies permettant de controler et regler les parametres de maniere a produire avec precision les caracteristiques desirees pour la surface durcie sans recourir au classique long et couteux processus essai-erreur. L'objectif du projet consiste donc a developper des modeles pour predire le profil de durete dans le cas de traitement thermique de pieces en acier AISI 4340. Pour comprendre le comportement du procede et evaluer les effets des differents parametres sur la qualite du traitement, une etude de sensibilite a ete menee en se basant sur une planification experimentale structuree combinee a des techniques d'analyse statistiques eprouvees. Les resultats de cette etude ont permis l'identification des variables les plus pertinentes a exploiter pour la modelisation. Suite a cette analyse et dans le but d'elaborer un premier modele, deux techniques de modelisation ont ete considerees, soient la regression multiple et les reseaux de neurones. Les deux techniques ont conduit a des modeles de qualite acceptable avec une precision d'environ 90%. Pour ameliorer les performances des modeles a base de reseaux de neurones, deux nouvelles approches basees sur la caracterisation geometrique du profil de durete ont ete considerees. Contrairement aux premiers modeles predisant le profil de durete en fonction des parametres du procede, les nouveaux modeles combinent les memes parametres avec les attributs geometriques du profil de durete pour refleter la qualite du traitement. Les modeles obtenus montrent que cette strategie conduit a des resultats tres prometteurs.

Disappearing and reappearing differences in drug-eluting stent use by race.

PubMed

Federspiel, Jerome J; Stearns, Sally C; Reiter, Kristin L; Geissler, Kimberley H; Triplette, Matthew A; D'Arcy, Laura P; Sheridan, Brett C; Rossi, Joseph S

2013-04-01

Drug-eluting coronary stents (DES) rapidly dominated the marketplace in the United States after approval in 2003, but utilization rates were initially lower among African American patients. We assess whether racial differences persisted as DES diffused into practice. Medicare claims data were used to identify coronary stenting procedures among elderly patients with acute coronary syndromes (ACS). Regression models of the choice of DES versus bare mental stent controlled for demographics, ACS type, co-morbidities and hospital characteristics. Diffusion was assessed in the short run (2003-2004) and long run (2007), with the effect of race calculated to allow for time-varying effects. The sample included 381,887 Medicare beneficiaries treated with stent insertion; approximately 5% were African American. Initially (May 2003-February 2004), African American race was associated with lower DES use compared to other races (44.3% versus 46.5%, P < 0.01). Once DES usage was high in all patients (March-December 2004), differences were not significant (79.8% versus 80.3%, P = 0.45). Subsequent concerns regarding DES safety caused reductions in DES use, with African Americans having lower use than other racial groups in 2007 (63.1% versus 65.2%, P < 0.01). Racial disparities in DES use initially disappeared during a period of rapid diffusion and high usage rates; the reappearance of disparities in use by 2007 may reflect DES use tailored to unmeasured aspects of case mix and socio-economic status. Further work is needed to understand whether underlying differences in race reflect decisions regarding treatment appropriateness. © 2011 Blackwell Publishing Ltd.

High sensitivity pH sensing on the BEOL of industrial FDSOI transistors

NASA Astrophysics Data System (ADS)

Rahhal, Lama; Ayele, Getenet Tesega; Monfray, Stéphane; Cloarec, Jean-Pierre; Fornacciari, Benjamin; Pardoux, Eric; Chevalier, Celine; Ecoffey, Serge; Drouin, Dominique; Morin, Pierre; Garnier, Philippe; Boeuf, Frederic; Souifi, Abdelkader

2017-08-01

In this work we demonstrate the use of Fully Depleted Silicon On Insulator (FDSOI) transistors as pH sensors with a 23 nm silicon nitride sensing layer built in the Back-End-Of-Line (BEOL). The back end process to deposit the sensing layer and fabricate the electrical structures needed for testing is detailed. A series of tests employing different pH buffer solutions has been performed on transistors of different geometries, controlled via the back gate. The main findings show a shift of the drain current (ID) as a function of the back gate voltage (VB) when different pH buffer solutions are probed in the range of pH 6 to pH 8. This shift is observed at VB voltages swept from 0 V to 3 V, demonstrating the sensor operation at low voltage. A high sensitivity of up to 250 mV/pH unit (more than 4-fold larger than Nernstian response) is observed on FDSOI MOS transistors of 0.06 μm gate length and 0.08 μm gate width. She is currently working as a Postdoctoral researcher at Institut des nanotechnologies de Lyon in collaboration with STMicroelectronics and Université de Sherbrook (Canada) working on ;Integration of ultra-low-power gas and pH sensors with advanced technologies;. Her research interest includes selection, machining, optimisation and electrical characterisation of the sensitive layer for a low power consumption gas sensor based on advanced MOS transistors.

Dwell time-based stabilisation of switched delay systems using free-weighting matrices

NASA Astrophysics Data System (ADS)

Koru, Ahmet Taha; Delibaşı, Akın; Özbay, Hitay

2018-01-01

In this paper, we present a quasi-convex optimisation method to minimise an upper bound of the dwell time for stability of switched delay systems. Piecewise Lyapunov-Krasovskii functionals are introduced and the upper bound for the derivative of Lyapunov functionals is estimated by free-weighting matrices method to investigate non-switching stability of each candidate subsystems. Then, a sufficient condition for the dwell time is derived to guarantee the asymptotic stability of the switched delay system. Once these conditions are represented by a set of linear matrix inequalities , dwell time optimisation problem can be formulated as a standard quasi-convex optimisation problem. Numerical examples are given to illustrate the improvements over previously obtained dwell time bounds. Using the results obtained in the stability case, we present a nonlinear minimisation algorithm to synthesise the dwell time minimiser controllers. The algorithm solves the problem with successive linearisation of nonlinear conditions.

A New Computational Technique for the Generation of Optimised Aircraft Trajectories

NASA Astrophysics Data System (ADS)

Chircop, Kenneth; Gardi, Alessandro; Zammit-Mangion, David; Sabatini, Roberto

2017-12-01

A new computational technique based on Pseudospectral Discretisation (PSD) and adaptive bisection ɛ-constraint methods is proposed to solve multi-objective aircraft trajectory optimisation problems formulated as nonlinear optimal control problems. This technique is applicable to a variety of next-generation avionics and Air Traffic Management (ATM) Decision Support Systems (DSS) for strategic and tactical replanning operations. These include the future Flight Management Systems (FMS) and the 4-Dimensional Trajectory (4DT) planning and intent negotiation/validation tools envisaged by SESAR and NextGen for a global implementation. In particular, after describing the PSD method, the adaptive bisection ɛ-constraint method is presented to allow an efficient solution of problems in which two or multiple performance indices are to be minimized simultaneously. Initial simulation case studies were performed adopting suitable aircraft dynamics models and addressing a classical vertical trajectory optimisation problem with two objectives simultaneously. Subsequently, a more advanced 4DT simulation case study is presented with a focus on representative ATM optimisation objectives in the Terminal Manoeuvring Area (TMA). The simulation results are analysed in-depth and corroborated by flight performance analysis, supporting the validity of the proposed computational techniques.

Model fitting for small skin permeability data sets: hyperparameter optimisation in Gaussian Process Regression.

PubMed

Ashrafi, Parivash; Sun, Yi; Davey, Neil; Adams, Roderick G; Wilkinson, Simon C; Moss, Gary Patrick

2018-03-01

The aim of this study was to investigate how to improve predictions from Gaussian Process models by optimising the model hyperparameters. Optimisation methods, including Grid Search, Conjugate Gradient, Random Search, Evolutionary Algorithm and Hyper-prior, were evaluated and applied to previously published data. Data sets were also altered in a structured manner to reduce their size, which retained the range, or 'chemical space' of the key descriptors to assess the effect of the data range on model quality. The Hyper-prior Smoothbox kernel results in the best models for the majority of data sets, and they exhibited significantly better performance than benchmark quantitative structure-permeability relationship (QSPR) models. When the data sets were systematically reduced in size, the different optimisation methods generally retained their statistical quality, whereas benchmark QSPR models performed poorly. The design of the data set, and possibly also the approach to validation of the model, is critical in the development of improved models. The size of the data set, if carefully controlled, was not generally a significant factor for these models and that models of excellent statistical quality could be produced from substantially smaller data sets. © 2018 Royal Pharmaceutical Society.

Development and validation of a rapid capillary zone electrophoresis method for the determination of aconite alkaloids in aconite roots.

PubMed

Song, Jing-Zheng; Han, Quan-Bin; Qiao, Chun-Feng; But, Paul Pui-Hay; Xu, Hong-Xi

2010-01-01

Aconites, with aconite alkaloids as the major therapeutic and toxic components, are used for the treatment of analgesic, antirheumatic and neurological symptoms. Quantification of the aconite alkaloids is important for the quality control of aconite-containing drugs. To establish a validated capillary zone electrophoresis (CZE) method for the simultaneous determination of six major alkaloids, namely aconitine, mesaconitine, hypaconitine, benzoylaconine, benzoylmesaconine and benzoylhypaconine, in crude and processed aconite roots. The CZE method was optimised and validated using a stability-indicating method. The optimised running buffer was a mixture of 200 mm Tris, 150 mm perchloric acid and 40% 1,4-dioxane (pH 7.8) with the capillary thermostated at 25 degrees C. Using the optimised method, six aconite alkaloids were well separated. The established method showed good precision, accuracy and recovery. Contents of these alkaloids in crude and processed aconites were determined and it was observed that the levels of individual alkaloids varied between samples. The developed CZE method was reliable for the quality control of aconites contained in herbal medicines. The method could also be used as an approach for toxicological studies.

Modelling the protocol stack in NCS with deterministic and stochastic petri net

NASA Astrophysics Data System (ADS)

Hui, Chen; Chunjie, Zhou; Weifeng, Zhu

2011-06-01

Protocol stack is the basis of the networked control systems (NCS). Full or partial reconfiguration of protocol stack offers both optimised communication service and system performance. Nowadays, field testing is unrealistic to determine the performance of reconfigurable protocol stack; and the Petri net formal description technique offers the best combination of intuitive representation, tool support and analytical capabilities. Traditionally, separation between the different layers of the OSI model has been a common practice. Nevertheless, such a layered modelling analysis framework of protocol stack leads to the lack of global optimisation for protocol reconfiguration. In this article, we proposed a general modelling analysis framework for NCS based on the cross-layer concept, which is to establish an efficiency system scheduling model through abstracting the time constraint, the task interrelation, the processor and the bus sub-models from upper and lower layers (application, data link and physical layer). Cross-layer design can help to overcome the inadequacy of global optimisation based on information sharing between protocol layers. To illustrate the framework, we take controller area network (CAN) as a case study. The simulation results of deterministic and stochastic Petri-net (DSPN) model can help us adjust the message scheduling scheme and obtain better system performance.

Optimisation of active suspension control inputs for improved vehicle ride performance

NASA Astrophysics Data System (ADS)

Čorić, Mirko; Deur, Joško; Xu, Li; Tseng, H. Eric; Hrovat, Davor

2016-07-01

A collocation-type control variable optimisation method is used in the paper to analyse to which extent the fully active suspension (FAS) can improve the vehicle ride comfort while preserving the wheel holding ability. The method is first applied for a cosine-shaped bump road disturbance of different heights, and for both quarter-car and full 10 degree-of-freedom vehicle models. A nonlinear anti-wheel hop constraint is considered, and the influence of bump preview time period is analysed. The analysis is then extended to the case of square- or cosine-shaped pothole with different lengths, and the quarter-car model. In this case, the cost function is extended with FAS energy consumption and wheel damage resilience costs. The FAS action is found to be such to provide a wheel hop over the pothole, in order to avoid or minimise the damage at the pothole trailing edge. In the case of long pothole, when the FAS cannot provide the wheel hop, the wheel is travelling over the pothole bottom and then hops over the pothole trailing edge. The numerical optimisation results are accompanied by a simplified algebraic analysis.

Application of the adjoint optimisation of shock control bump for ONERA-M6 wing

NASA Astrophysics Data System (ADS)

Nejati, A.; Mazaheri, K.

2017-11-01

This article is devoted to the numerical investigation of the shock wave/boundary layer interaction (SWBLI) as the main factor influencing the aerodynamic performance of transonic bumped airfoils and wings. The numerical analysis is conducted for the ONERA-M6 wing through a shock control bump (SCB) shape optimisation process using the adjoint optimisation method. SWBLI is analyzed for both clean and bumped airfoils and wings, and it is shown how the modified wave structure originating from upstream of the SCB reduces the wave drag, by improving the boundary layer velocity profile downstream of the shock wave. The numerical simulation of the turbulent viscous flow and a gradient-based adjoint algorithm are used to find the optimum location and shape of the SCB for the ONERA-M6 airfoil and wing. Two different geometrical models are introduced for the 3D SCB, one with linear variations, and another with periodic variations. Both configurations result in drag reduction and improvement in the aerodynamic efficiency, but the periodic model is more effective. Although the three-dimensional flow structure involves much more complexities, the overall results are shown to be similar to the two-dimensional case.

High-throughput assay for optimising microbial biological control agent production and delivery

USDA-ARS?s Scientific Manuscript database

Lack of technologies to produce and deliver effective biological control agents (BCAs) is a major barrier to their commercialization. A myriad of variables associated with BCA cultivation, formulation, drying, storage, and reconstitution processes complicates agent quality maximization. An efficie...

Hybrid LES/RANS simulation of a turbulent boundary layer over a rectangular cavity

NASA Astrophysics Data System (ADS)

Zhang, Qi; Haering, Sigfried; Oliver, Todd; Moser, Robert

2016-11-01

We report numerical investigations of a turbulent boundary layer over a rectangular cavity using a new hybrid RANS/LES model and the traditional Detached Eddy Simulation (DES). Our new hybrid method aims to address many of the shortcomings from the traditional DES. In the new method, RANS/LES blending controlled by a parameter that measures the ratio of the modeled subgrid kinetic energy to an estimate of the subgrid energy based on the resolved scales. The result is a hybrid method automatically resolves as much turbulence as can be supported by the grid and transitions appropriately from RANS to LES without the need for ad hoc delaying functions that are often required for DES. Further, the new model is designed to improve upon DES by accounting for the effects of grid anisotropy and inhomogeneity in the LES region. We present comparisons of the flow features inside the cavity and the pressure time history and spectra as computed using the new hybrid model and DES.

Sexually disrupting effects of nonylphenol and diethylstilbestrol on male silver carp (Carassius auratus) in aquatic microcosms.

PubMed

Yang, Lihua; Lin, Li; Weng, Shaoping; Feng, Zhiqin; Luan, Tiangang

2008-10-01

Based on detected nonylphenol (NP) levels in aquaculture water, this study investigated sexually disrupting effects in mature male silver carp (Carassius auratus) exposed to NP and a positive control diethylstilbestrol (DES). The combined evidences of steroid hormone (17beta-estradiol, estrone and testosterone) levels and hispathological pictures showed that NP (10 microg/L) and DES could exert estrogenic effects through indirect mechanisms [i.e. increased estrogens levels (up to two times) and decreased androgen level in serum (down to 20-30%)], which might subsequently induce vitellogenin synthesis in liver. Environmental realistic concentrations of NP might be on the verge of inducing significant estrogenic effects in male silver carps. High amounts of NP and DES might be accumulated in fish serum, and the uptake by fish was possibly responsible for their quick attenuation in experimental tank water. NP and DES might have different metabolic mechanisms, the estrogenic effects of DES were more significant than those of NP.

Peste des Petits Ruminants Virus in Vulnerable Wild Small Ruminants, Iran, 2014-2016.

PubMed

Marashi, Mahmoud; Masoudi, Siamak; Moghadam, Majid Kharazian; Modirrousta, Hossein; Marashi, Mahyar; Parvizifar, Masoumeh; Dargi, Majid; Saljooghian, Mahyar; Homan, Farbod; Hoffmann, Bernd; Schulz, Claudia; Starick, Elke; Beer, Martin; Fereidouni, Sasan

2017-04-01

In 2014-2016, >1,000 wild goats and sheep in 4 northern and central provinces of Iran died from peste des petits ruminants virus (PPRV) infection. Partial nucleoprotein sequencing of PPRV from 3 animals showed a close relationship to lineage 4 strains from China. Control measures are needed to preserve vulnerable ruminant populations.

Very late stent thrombosis with second generation drug eluting stents compared to bare metal stents: Network meta-analysis of randomized primary percutaneous coronary intervention trials.

PubMed

Philip, Femi; Stewart, Susan; Southard, Jeffrey A

2016-07-01

The relative safety of drug-eluting stents (DES) and bare-metal stents (BMS) in primary percutaneous coronary intervention (PPCI) in ST elevation myocardial infarction (STEMI) continues to be debated. The long-term clinical outcomes between second generation DES and BMS for primary percutaneous coronary intervention (PCI) using network meta-analysis were compared. Randomized controlled trials comparing stent types (first generation DES, second generation DES, or BMS) were considered for inclusion. A search strategy used Medline, Embase, Cochrane databases, and proceedings of international meetings. Information about study design, inclusion criteria, and sample characteristics were extracted. Network meta-analysis was used to pool direct (comparison of second generation DES to BMS) and indirect evidence (first generation DES with BMS and second generation DES) from the randomized trials. Twelve trials comparing all stents types including 9,673 patients randomly assigned to treatment groups were analyzed. Second generation DES was associated with significantly lower incidence of definite or probable ST (OR 0.59, 95% CI 0.39-0.89), MI (OR 0.59, 95% CI 0.39-0.89), and TVR at 3 years (OR 0.50: 95% CI 0.31-0.81) compared with BMS. In addition, there was a significantly lower incidence of MACE with second generation DES versus BMS (OR 0.54, 95% CI 0.34-0.74) at 3 years. These were driven by a higher rate of TVR, MI and stent thrombosis in the BMS group at 3 years. There was a non-significant reduction in the overall and cardiac mortality [OR 0.83, 95% CI (0.60-1.14), OR 0.88, 95% CI (0.6-1.28)] with the use of second generation DES versus BMS at 3 years. Network meta-analysis of randomized trials of primary PCI demonstrated lower incidence of MACE, MI, TVR, and stent thrombosis with second generation DES compared with BMS. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

Human Factors Issues for Controlling Uninhabited Aerial Vehicles: Preliminary Findings in Support of the Canadian Forces Joint Unmanned Aerial Vehicle Surveillance Target Acquisition System Project (Incidence des Facteurs Humains sur le Pilotage des Vehicules Aeriens Telepilotes: Constatations Preliminaires a L’Appui du Projet de Systeme Interarmees D’Acquisition D’Objectif au Moyen de Vehicules Aeriens Telepilotes de Surveillance des Forces Canadiennes)

DTIC Science & Technology

2010-11-01

Misinterpreted communications, crew coordination, rank imbalance or pilot in command and co-pilot syndrome , crew composition, intra-cockpit communication...of sustained operations. They found that MQ-1 Predator crews experienced higher levels of fatigue, emotional exhaustion and burnout relative to 20

Mittelwert- und Arbeitstaktsynchrone Simulation von Dieselmotoren

NASA Astrophysics Data System (ADS)

Zahn, Sebastian

Getrieben durch die immer restriktiveren Anforderungen an das Emissions- und Verbrauchsverhalten moderner Verbrennungsmotoren steigt die Komplexität von Motormanagementsystemen mit jeder Modellgeneration an. Damit geht nicht nur eine Zunahme des Softwareumfangs von Steuergeräten sondern zugleich ein deutlicher Anstieg des Applikations-, Vermessungs- und Testaufwandes einher. Zur Effizienzsteigerung des Software- und Funktionsentwicklungsprozesses haben sich daher in der Automobilindustrie sowie in Forschungsinstituten verschiedene modell- und simulationsbasierte Methoden wie die Model-in-the-Loop (MiL) Simulation, die Software-in-the-Loop (SiL) Simulation, das Rapid Control Prototyping (RCP) sowie die Hardware-in-the-Loop (HiL) Simulation etabliert.

Control of a flexible link by shaping the closed loop frequency response function through optimised feedback filters

NASA Astrophysics Data System (ADS)

Del Vescovo, D.; D'Ambrogio, W.

1995-01-01

A frequency domain method is presented to design a closed-loop control for vibration reduction flexible mechanisms. The procedure is developed on a single-link flexible arm, driven by one rotary degree of freedom servomotor, although the same technique may be applied to similar systems such as supports for aerospace antennae or solar panels. The method uses the structural frequency response functions (FRFs), thus avoiding system identification, that produces modeling uncertainties. Two closed-loops are implemented: the inner loop uses acceleration feedback with the aim of making the FRF similar to that of an equivalent rigid link; the outer loop feeds back displacements to achieve a fast positioning response and null steady state error. In both cases, the controller type is established a priori, while actual characteristics are defined by an optimisation procedure in which the relevant FRF is constrained into prescribed bounds and stability is taken into account.

A multicenter, randomized study to test immunosuppressive therapy with oral prednisone for the prevention of restenosis after percutaneous coronary interventions: cortisone plus BMS or DES versus BMS alone to eliminate restenosis (CEREA-DES) - study design and rationale.

PubMed

Ribichini, Flavio; Tomai, Fabrizio; De Luca, Giuseppe; Boccuzzi, Giacomo; Presbitero, Patrizia; Pesarini, Gabriele; Ferrero, Valeria; Ghini, Anna S; Pastori, Francesca; De Luca, Leonardo; Zavalloni, Denis; Soregaroli, Daniela; Garbo, Roberto; Franchi, Elena; Marino, Paolo; Minelli, Massimo; Vassanelli, Corrado

2009-02-01

Several randomized trials and registries have shown a reduction of restenosis after coronary angioplasty with drug-eluting stents (DESs) compared with bare metal stents (BMSs). However, cost-efficacy analysis and long-term outcome of DESs compared to BMSs deserve further assessment. Moreover, concern has been raised regarding adverse clinical events occurring late after DES implantation, in particular, late stent thrombosis related to the suspension of dual antiplatelet therapy. The use of a short-cycle oral treatment with prednisone at immunosuppressive dose after BMS implantation has shown remarkable efficacy in reducing restenosis in nondiabetic patients, with very low additional cost and without the need for long-term dual antiplatelet therapy. Such results are however limited by small sample size. Cortisone plus BMS or DES versus BMS alone to Eliminate Restenosis is an independent, prospective, multicenter, randomized study. It will randomize 375 nondiabetic patients with coronary artery disease in three different arms to BMS (control group), DES (DES group) or BMS followed by a 40-day prednisone treatment (prednisone group). The DES and the prednisone groups will be compared to the control group to investigate the expected clinical advantage. The primary endpoint of the study is the event-free survival of cardiovascular death, myocardial infarction and recurrence of ischemia-needing repeated target vessel revascularization at 1 year. Secondary endpoints are the event-free survival analysis at 2 and 3 years, the restenosis rate at 9 months, and cost-effectiveness at 1, 2 and 3 years. The expected primary endpoint rates are 90% for DESs and for prednisone-treated patients and 77% for BMSs. The study was designed as a superiority trial, to compare DES, and BMS and prednisone, with BMS alone. A sample size of 118 patients per group provides an 80% power, assuming a complete 12-month follow-up information available for each patient. To obviate for cases of drop out, the sample size was increased to 375 patients to be enrolled in five Italian hospitals. This study will provide a magnitude of the net clinical and economic benefits of DES and of the safety and efficacy of BMS and cortisone compared to the standard use of BMS alone in nondiabetic patients with coronary artery disease.

Improving Vector Evaluated Particle Swarm Optimisation by Incorporating Nondominated Solutions

PubMed Central

Lim, Kian Sheng; Ibrahim, Zuwairie; Buyamin, Salinda; Ahmad, Anita; Naim, Faradila; Ghazali, Kamarul Hawari; Mokhtar, Norrima

2013-01-01

The Vector Evaluated Particle Swarm Optimisation algorithm is widely used to solve multiobjective optimisation problems. This algorithm optimises one objective using a swarm of particles where their movements are guided by the best solution found by another swarm. However, the best solution of a swarm is only updated when a newly generated solution has better fitness than the best solution at the objective function optimised by that swarm, yielding poor solutions for the multiobjective optimisation problems. Thus, an improved Vector Evaluated Particle Swarm Optimisation algorithm is introduced by incorporating the nondominated solutions as the guidance for a swarm rather than using the best solution from another swarm. In this paper, the performance of improved Vector Evaluated Particle Swarm Optimisation algorithm is investigated using performance measures such as the number of nondominated solutions found, the generational distance, the spread, and the hypervolume. The results suggest that the improved Vector Evaluated Particle Swarm Optimisation algorithm has impressive performance compared with the conventional Vector Evaluated Particle Swarm Optimisation algorithm. PMID:23737718

Improving Vector Evaluated Particle Swarm Optimisation by incorporating nondominated solutions.

PubMed

Lim, Kian Sheng; Ibrahim, Zuwairie; Buyamin, Salinda; Ahmad, Anita; Naim, Faradila; Ghazali, Kamarul Hawari; Mokhtar, Norrima

2013-01-01

The Vector Evaluated Particle Swarm Optimisation algorithm is widely used to solve multiobjective optimisation problems. This algorithm optimises one objective using a swarm of particles where their movements are guided by the best solution found by another swarm. However, the best solution of a swarm is only updated when a newly generated solution has better fitness than the best solution at the objective function optimised by that swarm, yielding poor solutions for the multiobjective optimisation problems. Thus, an improved Vector Evaluated Particle Swarm Optimisation algorithm is introduced by incorporating the nondominated solutions as the guidance for a swarm rather than using the best solution from another swarm. In this paper, the performance of improved Vector Evaluated Particle Swarm Optimisation algorithm is investigated using performance measures such as the number of nondominated solutions found, the generational distance, the spread, and the hypervolume. The results suggest that the improved Vector Evaluated Particle Swarm Optimisation algorithm has impressive performance compared with the conventional Vector Evaluated Particle Swarm Optimisation algorithm.

Prenatal exposure to bisphenol a at environmentally relevant doses adversely affects the murine female reproductive tract later in life.

PubMed

Newbold, Retha R; Jefferson, Wendy N; Padilla-Banks, Elizabeth

2009-06-01

Exposure to endocrine-disrupting chemicals during critical developmental periods causes adverse consequences later in life; an example is prenatal exposure to the pharmaceutical diethylstilbestrol (DES). Bisphenol A (BPA), an environmental estrogen used in the synthesis of plastics, is of concern because its chemical structure resembles that of DES, and it is a "high-volume production" chemical with widespread human exposure. In this study we investigated whether prenatal BPA causes long-term adverse effects in female reproductive tissues in an experimental animal model previously shown useful in studying effects of prenatal DES. Timed pregnant CD-1 mice were treated on days 9-16 of gestation with BPA (0.1, 1, 10, 100, or 1,000 mug/kg/day). After delivery, pups were held for 18 months; reproductive tissues were then evaluated. Ovarian cysts were significantly increased in the 1-mug/kg BPA group; ovarian cyst-adenomas were seen in the other three BPA-treated groups but not in corn-oil controls. We observed increased progressive proliferative lesions of the oviduct after BPA treatment, similar to those described in response to DES. Further, although not statistically different from the controls, prominent mesonephric (Wolffian) remnants and squamous metaplasia of the uterus, as well as vaginal adenosis, were present in BPA-treated mice, similar to lesions reported following DES treatment. More severe pathologies observed in some BPA-treated animals included atypical hyperplasia and stromal polyps of the uterus; sarcoma of the uterine cervix; and mammary adenocarcinoma. We did not observe these lesions in controls. These data suggest that BPA causes long-term adverse reproductive and carcinogenic effects if exposure occurs during critical periods of differentiation.

Prenatal Exposure to Bisphenol A at Environmentally Relevant Doses Adversely Affects the Murine Female Reproductive Tract Later in Life

PubMed Central

Newbold, Retha R.; Jefferson, Wendy N.; Padilla-Banks, Elizabeth

2009-01-01

Background Exposure to endocrine-disrupting chemicals during critical developmental periods causes adverse consequences later in life; an example is prenatal exposure to the pharmaceutical diethylstilbestrol (DES). Bisphenol A (BPA), an environmental estrogen used in the synthesis of plastics, is of concern because its chemical structure resembles that of DES, and it is a “high-volume production” chemical with widespread human exposure. Objectives In this study we investigated whether prenatal BPA causes long-term adverse effects in female reproductive tissues in an experimental animal model previously shown useful in studying effects of prenatal DES. Methods Timed pregnant CD-1 mice were treated on days 9–16 of gestation with BPA (0.1, 1, 10, 100, or 1,000 μg/kg/day). After delivery, pups were held for 18 months; reproductive tissues were then evaluated. Results Ovarian cysts were significantly increased in the 1-μg/kg BPA group; ovarian cyst-adenomas were seen in the other three BPA-treated groups but not in corn-oil controls. We observed increased progressive proliferative lesions of the oviduct after BPA treatment, similar to those described in response to DES. Further, although not statistically different from the controls, prominent mesonephric (Wolffian) remnants and squamous metaplasia of the uterus, as well as vaginal adenosis, were present in BPA-treated mice, similar to lesions reported following DES treatment. More severe pathologies observed in some BPA-treated animals included atypical hyperplasia and stromal polyps of the uterus; sarcoma of the uterine cervix; and mammary adenocarcinoma. We did not observe these lesions in controls. Conclusions These data suggest that BPA causes long-term adverse reproductive and carcinogenic effects if exposure occurs during critical periods of differentiation. PMID:19590677

An approach to optimised control of HVAC systems in indoor swimming pools

NASA Astrophysics Data System (ADS)

Ribeiro, Eliseu M. A.; Jorge, Humberto M. M.; Quintela, Divo A. A.

2016-04-01

Indoor swimming pools are recognised as having a high level of energy consumption and present a great potential for energy saving. The energy is spent in several ways such as evaporation heat loss from the pool, high rates of ventilation required to guarantee the indoor air quality, and ambient temperatures with expressive values (typically 28-30°C) required to maintain conditions of comfort. This paper presents an approach to optimising control of heat ventilation and air conditioning systems that could be implemented in a building energy management system. It is easily adapted to any kind of pool and results in significant energy consumption reduction. The development and validation of the control model were carried out with a building thermal simulation software. The use of this control model in the case study building could reduce the energy efficiency index by 7.14 points (7.4% of total) which adds up to an energy cost saving of 15,609€ (7.5% of total).

The rheology, microstructure and sensory characteristics of a gluten-free bread formulation enhanced with orange pomace.

PubMed

O'Shea, Norah; Doran, Linda; Auty, Mark; Arendt, Elke; Gallagher, Eimear

2013-12-01

The present manuscript studied a previously optimised gluten-free bread formulation containing 5.5% orange pomace (OP) in relation to the batter characteristics (i.e. pre-baking), microstructure (of the flours, batter and bread) and sensory characteristics of the bread. Rheology, RVA and mixolab results illustrated that orange pomace improved the robustness of the gluten-free batter and decreased the occurrence of starch gelatinisation. This was confirmed from the confocal laser scanning microscopy (CLSM) images, which showed potato starch granules to be more expanded in the control batter when compared to the sample containing orange pomace. Starch granules were also observed to be more enlarged and swollen in the CLSM bread images, suggesting a higher level of gelatinisation occurred in the control sample. Sensory analysis was carried out on the optimised and control bread; panellists scored the flavour, crumb appearance and overall acceptability of the OP-containing breads comparable to the control.

Optimisation of rocker sole footwear for prevention of first plantar ulcer: comparison of group-optimised and individually-selected footwear designs.

PubMed

Preece, Stephen J; Chapman, Jonathan D; Braunstein, Bjoern; Brüggemann, Gert-Peter; Nester, Christopher J

2017-01-01

Appropriate footwear for individuals with diabetes but no ulceration history could reduce the risk of first ulceration. However, individuals who deem themselves at low risk are unlikely to seek out bespoke footwear which is personalised. Therefore, our primary aim was to investigate whether group-optimised footwear designs, which could be prefabricated and delivered in a retail setting, could achieve appropriate pressure reduction, or whether footwear selection must be on a patient-by-patient basis. A second aim was to compare responses to footwear design between healthy participants and people with diabetes in order to understand the transferability of previous footwear research, performed in healthy populations. Plantar pressures were recorded from 102 individuals with diabetes, considered at low risk of ulceration. This cohort included 17 individuals with peripheral neuropathy. We also collected data from 66 healthy controls. Each participant walked in 8 rocker shoe designs (4 apex positions × 2 rocker angles). ANOVA analysis was then used to understand the effect of two design features and descriptive statistics used to identify the group-optimised design. Using 200 kPa as a target, this group-optimised design was then compared to the design identified as the best for each participant (using plantar pressure data). Peak plantar pressure increased significantly as apex position was moved distally and rocker angle reduced ( p  < 0.001). The group-optimised design incorporated an apex at 52% of shoe length, a 20° rocker angle and an apex angle of 95°. With this design 71-81% of peak pressures were below the 200 kPa threshold, both in the full cohort of individuals with diabetes and also in the neuropathic subgroup. Importantly, only small increases (<5%) in this proportion were observed when participants wore footwear which was individually selected. In terms of optimised footwear designs, healthy participants demonstrated the same response as participants with diabetes, despite having lower plantar pressures. This is the first study demonstrating that a group-optimised, generic rocker shoe might perform almost as well as footwear selected on a patient by patient basis in a low risk patient group. This work provides a starting point for clinical evaluation of generic versus personalised pressure reducing footwear.

Inverse association of des-acyl ghrelin with worksite blood pressure in overweight/obese male workers.

PubMed

Narisada, Akihiko; Hasegawa, Tomomi; Nakahigashi, Maki; Hirobe, Takaaki; Ikemoto, Tatsunori; Ushida, Takahiro; Kobayashi, Fumio

2015-05-01

Job strain, defined as a combination of high job demands and low job control, has been reported to elevate blood pressure (BP) during work. Meanwhile, a recent experimental study showed that ghrelin blunted the BP response to such mental stress. In the present study, we examined the hypothesis that des-acyl ghrelin may have some beneficial effects on worksite BP through modulating the BP response to work-related mental stress, i.e., job strain. Subjects were 34 overweight/obese male day-shift workers (mean age 41.7 ± 6.7 years). No subjects had received any anti-hypertensive medication. A 24-h ambulatory BP monitoring was recorded every 30 min on a regular working day. The average BP was calculated for Work BP, Morning BP, and Home BP. Job strain was assessed using the short version of the Japanese Job Content Questionnaire. Des-acyl ghrelin showed significant inverse correlations with almost all BPs except Morning SBP, Morning DBP, and Home DBP. In multiple regression analysis, des-acyl ghrelin inversely correlated with Work SBP after adjusting for confounding factors. Des-acyl ghrelin was also negatively associated with BP changes from Sleep to Morning, Sleep to Work, and Sleep to Home. Des-acyl ghrelin was inversely associated with Worksite BP, suggesting a unique beneficial effect of des-acyl ghrelin on Worksite BP in overweight/obese male day-shift workers.

Dysfunctional elimination symptoms in childhood and adulthood.

PubMed

Bower, W F; Yip, S K; Yeung, C K

2005-10-01

The dysfunctional elimination syndrome (DES) is rare in adulthood. We evaluate the natural history of DES to identify aspects of the disorder that may be carried into adulthood. A 2-part questionnaire was devised and self-administered to 191 consecutive women attending a urogynecological clinic (UG) and to 251 normal women. The first section asked for recall of childhood symptoms known to be associated with DES, while the lat-ter section explored current bladder and bowel problems. Data sets from the normal cohort (55) reporting current bladder problems were excluded. Descriptive statistics, chi-square and Mann-Whitney-U tests were used to compare variables. UG patients had significantly higher childhood DES scores than normal women. Overall 41.7% of UG patients could be labeled as having dysfunctional elimination as an adult. Symptoms reported significantly more often in childhood by UG patients than by control women were frequent urinary tract infection, vesicoureteral reflux, frequency, urge incontinence, slow and intermittent urine flow, small volume high urge voids, hospitalization for constipation, frequent fecal soiling and nocturnal enuresis. Higher DES scores correlated significantly with current adult urgency, urge leak, stress incontinence, incomplete emptying, post-void leak, hesitancy, nocturia and nocturnal enuresis. Constipation and fecal incontinence in adulthood also showed a significant association with high DES scores. Logistic regression revealed childhood urgency to be associated with adult DES. Childhood lower urinary tract dysfunction may have a negative impact on bladder and bowel function later life.

Center for Disease Control's Diethylstilbestrol Update: a case for effective operationalization of messaging in social marketing practice.

PubMed

Mattson, Marifran; Basu, Ambar

2010-07-01

The Center for Disease Control's (CDC) Diethylstilbestrol (DES) Update, a campaign to educate people who may have been exposed to the drug DES, is framed on the premises of the social marketing model, namely formative research, audience segmentation, product, price, placement, promotion, and campaign evaluation. More than that, the campaign takes a critical step in extending the social marketing paradigm by highlighting the need to situate the messaging process at the heart of any health communication campaign. This article uses CDC's DES Update as a case study to illustrate an application of a message development tool within social marketing. This tool promotes the operationalization of messaging within health campaigns. Ultimately, the goal of this project is to extend the social marketing model and provide useful theoretical guidance to health campaign practitioners on how to accomplish stellar communication within a social marketing campaign.

Condition Monitoring Techniques for Electromechanical Equipment Used in Air Force Ground C3I (Command, Control, Communications and Intelligence) Systems.

DTIC Science & Technology

1983-08-01

Proc. 2nd Congress National de flabilite, Perros -Guirec, Sept. 17-20, 1974, pp. 639-653. Published by CNET, Lannion (France). 53. Love, A. E. H., A...96. C. Rosiaux, Fiabilite des allumeurs determinee a partir des ventes-echanges, Proc. 2nd Congres National de fiabilite, Perros Guirec, Sept. 17-20

Comparison of the ActiDes-Blue and CARELA HYDRO-DES technology for the sanitation of contaminated cooling water systems in dental units.

PubMed

Kramer, Axel; Lemanski, Sandra; Demond, Kathleen; Assadian, Ojan

2012-01-01

The hygienic-microbiological control of 6 dental units being in use for the past 16 years revealed a significantly increased microbial contamination of their cooling water system. In order to comply with the requirements of the drinking water directive ("Trinkwasserverordnung"), the commercially available production system ActiDes, producing on-site ActiDes-Blue which is based on hypochlorous acid (HOCl) and generated by anodic oxidation, was investigated. Water samples from the 6 contaminated dental units were examined for the total number of colony forming units (cfu), contamination with molds, L. pneumophila and P. aeruginosa. The control period for the total colony count was 4 weeks (8 samples/unit). The subsequent application phase of the ActiDes-Blue procedure was 6 months (31 samples/unit). Additionally, the redox potential and the pH value were measured.Futhermore, the decontamination agent CARELA HYDRO-DES, a two component agent based on H(2)O(2) with the addition of a mixture of sodium hydrogen sulphate and sulphuric acid in an aqueous solution effective at 0.1% and higher, was applied in a unit that had been put out of service for a month before. Before application, the system was first filled with a 5% solution of the alkaline pre-cleaning agent CARELA Solvent for bacterial slime; the system was left with this solution for 1 h. The pre-cleaning agent was then completely displaced from the system with tap water and a decontaminating solution of 5% CARELA HYDRO-DES and left in place for 1 h. Drinking water quality level was reached only twice during the control phase. The average values of the dental units ranged between 3,633 CFU/ml and 29,417 c/ml. During the application phase, drinking water level could be achieved in 11 water samples. In another 6 water samples a total colony count of <150 cfu/ml was reached. The average values for the dental units' total colony count ranged between 529 cfu/ml and 87,450 cfu/ml. No significant differences between the control phase and the action phase could be demonstrated. During the control phase, contamination of the water samples with a mold was noticed so that examinations for molds were carried out beyond the scope of the drinking water directive. For this parameter as well, no significant differences between the phases of the study could be shown.The Legionella load of the dental units was low. L. pneumophila were yielded in only 4 out of 130 water samples. During the control phase, twice colony counts at 50 cfu/1,000 ml and 110 cfu/1,000 ml were measured. During the action phase, counts with Legionella spp. could be measured at 5 cfu/1,000 ml for one unit only. Also, with 1-10 cfu/100 ml, the P. aeruginosa contamination was low. During the application phase, it ranged between 0-7 cfu/100 ml.Redox potential and pH value showed a slight decrease during the application phase.Before treatment with CARELA Solvent and CARELA HYDRO-DES, the initial contamination of the total count of bacterial colonies was 1,432 cfu/ml at 22°C and 846 cfu/ml at 36°C as well as >1,000 cfu/100 ml for molds. 1 h after the decontamination, no bacteria and molds could be detected in 1,000 ml of tap water. Despite the fact that the unit was not used any longer, after 7 d the bacterial colony count was 3 cfu/ml at 22°C and 2 cfu/ml at 36°C while molds could not be detected. Even after a rest time of 14 d only 167 cfu/ml or 42 cfu/ml could be yielded. Molds were further not cultivable. A material damage could not be observed. Pertaining to the ActiDes technology's effectiveness, it has to be pointed out that the dental units investigated were those used for dental students' teaching and therefore were clearly less frequently used than clinically used units in a dental practice. This resulted in distinctly longer stagnation periods which favored formation of biofilms. In summary, the ActiDes technology and ActiDes-Blue showed not to be sufficiently effective for the sanitation of contaminated water reservoirs in dental units under aggravated conditions of repeated and longer periods of non-use in connection with longer water stagnation periods. In comparison, the biofilm was sustainably eliminated through the combined application of CARELA(®) Solvent for Bacterial Slime with subsequent decontamination using CARELA(®) HYDRO-DES.

Optimisation des proprietes physiques d'un composite carbone epoxy fabrique par le procede RFI

NASA Astrophysics Data System (ADS)

Koanda, Mahamat Mamadou Lamine

The RFI (Resin Film Infusion) process is a composite materials manufacturing process. Especially known for the small investment it requires, RFI processes are more and more widely used in the aeronautical industry. However a number of aspects of this process are still not well controlled. The quality of the final part depends on which process is used. In the case of RFI, controlling physical characteristics such as thickness, fiber volume fraction or void content remains a major challenge. This dissertation deals with the optimization of the physical properties of a carbon composite manufactured with RFI processes. The ASTMD3171 and ASTMD792 standards were used to measure the void content and fiber volume fraction. First, we introduced different layup sequences in the RFI process and evaluate their impact on the physical properties of the final product. The experiments show the primary mode A, with the resin film at the bottom, resulting in much better quality with controlled fiber volume fraction and void content. Mode B (film in the symmetrical plane) yields results identical to mode A except more irregular thicknesses. Mode C (symmetrical film in the laminate) produces locally unacceptable void contents. Mode D (resin film on the top of the laminate) yields much better results than mode A with the exception of the more irregular thicknesses. Making gaps and overlaps with the resin film has negative effects beyond 2.54cm (one inch) and should be avoided. Several C-scan observations of the manufactured samples showed a large accumulation of porosity in the resin rich areas, as well as surface defects. Ultimately we analyzed the cure cycle in light of the thermodynamic porosity models. It is evident that the diffusion phenomenon is essential in this process. Therefore a better conditioning of the resin film made by Cytec is required. An optimal design with a cycle stop and pressure lag yields the optimal cure cycle for the RFI process.

Optimising design, operation and energy consumption of biological aerated filters (BAF) for nitrogen removal of municipal wastewater.

PubMed

Rother, E; Cornel, P

2004-01-01

The Biofiltration process in wastewater treatment combines filtration and biological processes in one reactor. In Europe it is meanwhile an accepted technology in advanced wastewater treatment, whenever space is scarce and a virtually suspended solids-free effluent is demanded. Although more than 500 plants are in operation world-wide there is still a lack of published operational experiences to help planners and operators to identify potentials for optimisation, e.g. energy consumption or the vulnerability against peakloads. Examples from pilot trials are given how the nitrification and denitrification can be optimised. Nitrification can be quickly increased by adjusting DO content of the water. Furthermore carrier materials like zeolites can store surplus ammonia during peak loads and release afterwards. Pre-denitrification in biofilters is normally limited by the amount of easily degradable organic substrate, resulting in relatively high requirements for external carbon. The combination of pre-DN, N and post-DN filters is much more advisable for most municipal wastewaters, because the recycle rate can be reduced and external carbon can be saved. Exemplarily it is shown for a full scale preanoxic-DN/N/postanoxic-DN plant of 130,000 p.e. how 15% energy could be saved by optimising internal recycling and some control strategies.

Dietary optimisation with omega-3 and omega-6 fatty acids for 12-23-month-old overweight and obese children in urban Jakarta.

PubMed

Cahyaningrum, Fitrianna; Permadhi, Inge; Ansari, Muhammad Ridwan; Prafiantini, Erfi; Rachman, Purnawati Hustina; Agustina, Rina

2016-12-01

Diets with a specific omega-6/omega-3 fatty acid ratio have been reported to have favourable effects in controlling obesity in adults. However, development a local-based diet by considering the ratio of these fatty acids for improving the nutritional status of overweight and obese children is lacking. Therefore, using linear programming, we developed an affordable optimised diet focusing on the ratio of omega- 6/omega-3 fatty acid intake for obese children aged 12-23 months. A crosssectional study was conducted in two subdistricts of East Jakarta involving 42 normal-weight and 29 overweight and obese children, grouped on the basis of their body mass index for-age Z scores and selected through multistage random sampling. A 24-h recall was performed for 3-nonconsecutive days to assess the children's dietary intake levels and food patterns. We conducted group and structured interviews as well as market surveys to identify food availability, accessibility and affordability. Three types of affordable optimised 7-day diet meal plans were developed on the basis of breastfeeding status. The optimised diet plan fulfilled energy and macronutrient intake requirements within the acceptable macronutrient distribution range. The omega-6/omega-3 fatty acid ratio in the children was between 4 and 10. Moreover, the micronutrient intake level was within the range of the recommended daily allowance or estimated average recommendation and tolerable upper intake level. The optimisation model used in this study provides a mathematical solution for economical diet meal plans that approximate the nutrient requirements for overweight and obese children.

Chronometric Electrical Stimulation of Right Inferior Frontal Cortex Increases Motor Braking

PubMed Central

Conner, Christopher R.; Aron, Adam R.; Tandon, Nitin

2013-01-01

The right inferior frontal cortex (rIFC) is important for stopping responses. Recent research shows that it is also activated when response emission is slowed down when stopping is anticipated. This suggests that rIFC also functions as a goal-driven brake. Here, we investigated the causal role of rIFC in goal-driven braking by using computer-controlled, event-related (chronometric), direct electrical stimulation (DES). We compared the effects of rIFC stimulation on trials in which responses were made in the presence versus absence of a stopping-goal (“Maybe Stop” [MS] vs “No Stop” [NS]). We show that DES of rIFC slowed down responses (compared with control-site stimulation) and that rIFC stimulation induced more slowing when motor braking was required (MS) compared with when it was not (NS). Our results strongly support a causal role of a rIFC-based network in inhibitory motor control. Importantly, the results extend this causal role beyond externally driven stopping to goal-driven inhibitory control, which is a richer model of human self-control. These results also provide the first demonstration of double-blind chronometric DES of human prefrontal cortex, and suggest that—in the case of rIFC—this could lead to augmentation of motor braking. PMID:24336725

Intelligent Internet-based information system optimises diabetes mellitus management in communities.

PubMed

Wei, Xuejuan; Wu, Hao; Cui, Shuqi; Ge, Caiying; Wang, Li; Jia, Hongyan; Liang, Wannian

2018-05-01

To evaluate the effect of an intelligent Internet-based information system upon optimising the management of patients diagnosed with type 2 diabetes mellitus (T2DM). In 2015, a T2DM information system was introduced to optimise the management of T2DM patients for 1 year in Fangzhuang community of Beijing, China. A total of 602 T2DM patients who were registered in the health service centre of Fangzhuang community were enrolled based on an isometric sampling technique. The data from 587 patients were used in the final analysis. The intervention effect was subsequently assessed by statistically comparing multiple parameters, such as the prevalence of glycaemic control, standard health management and annual outpatient consultation visits per person, before and after the implementation of the T2DM information system. In 2015, a total of 1668 T2DM patients were newly registered in Fangzhuang community. The glycaemic control rate was calculated as 37.65% in 2014 and significantly elevated up to 62.35% in 2015 ( p < 0.001). After application of the Internet-based information system, the rate of standard health management was increased from 48.04% to 85.01% ( p < 0.001). Among all registered T2DM patients, the annual outpatient consultation visits per person in Fangzhuang community was 24.88% in 2014, considerably decreased to 22.84% in 2015 ( p < 0.001) and declined from 14.59% to 13.66% in general hospitals ( p < 0.05). Application of the T2DM information system optimised the management of T2DM patients in Fangzhuang community and decreased the outpatient numbers in both community and general hospitals, which played a positive role in assisting T2DM patients and their healthcare providers to better manage this chronic illness.

Detailed systematic analysis of recruitment strategies in randomised controlled trials in patients with an unscheduled admission to hospital

PubMed Central

Rooshenas, Leila; Fairhurst, Katherine; Rees, Jonathan; Gamble, Carrol; Blazeby, Jane M

2018-01-01

Objectives To examine the design and findings of recruitment studies in randomised controlled trials (RCTs) involving patients with an unscheduled hospital admission (UHA), to consider how to optimise recruitment in future RCTs of this nature. Design Studies within the ORRCA database (Online Resource for Recruitment Research in Clinical TriAls; www.orrca.org.uk) that reported on recruitment to RCTs involving UHAs in patients >18 years were included. Extracted data included trial clinical details, and the rationale and main findings of the recruitment study. Results Of 3114 articles populating ORRCA, 39 recruitment studies were eligible, focusing on 68 real and 13 hypothetical host RCTs. Four studies were prospectively planned investigations of recruitment interventions, one of which was a nested RCT. Most recruitment papers were reports of recruitment experiences from one or more ‘real’ RCTs (n=24) or studies using hypothetical RCTs (n=11). Rationales for conducting recruitment studies included limited time for informed consent (IC) and patients being too unwell to provide IC. Methods to optimise recruitment included providing patients with trial information in the prehospital setting, technology to allow recruiters to cover multiple sites, screening logs to uncover recruitment barriers, and verbal rather than written information and consent. Conclusion There is a paucity of high-quality research into recruitment in RCTs involving UHAs with only one nested randomised study evaluating a recruitment intervention. Among the remaining studies, methods to optimise recruitment focused on how to improve information provision in the prehospital setting and use of screening logs. Future research in this setting should focus on the prospective evaluation of the well-developed interventions to optimise recruitment. PMID:29420230

Detailed systematic analysis of recruitment strategies in randomised controlled trials in patients with an unscheduled admission to hospital.

PubMed

Rowlands, Ceri; Rooshenas, Leila; Fairhurst, Katherine; Rees, Jonathan; Gamble, Carrol; Blazeby, Jane M

2018-02-02

To examine the design and findings of recruitment studies in randomised controlled trials (RCTs) involving patients with an unscheduled hospital admission (UHA), to consider how to optimise recruitment in future RCTs of this nature. Studies within the ORRCA database (Online Resource for Recruitment Research in Clinical TriAls; www.orrca.org.uk) that reported on recruitment to RCTs involving UHAs in patients >18 years were included. Extracted data included trial clinical details, and the rationale and main findings of the recruitment study. Of 3114 articles populating ORRCA, 39 recruitment studies were eligible, focusing on 68 real and 13 hypothetical host RCTs. Four studies were prospectively planned investigations of recruitment interventions, one of which was a nested RCT. Most recruitment papers were reports of recruitment experiences from one or more 'real' RCTs (n=24) or studies using hypothetical RCTs (n=11). Rationales for conducting recruitment studies included limited time for informed consent (IC) and patients being too unwell to provide IC. Methods to optimise recruitment included providing patients with trial information in the prehospital setting, technology to allow recruiters to cover multiple sites, screening logs to uncover recruitment barriers, and verbal rather than written information and consent. There is a paucity of high-quality research into recruitment in RCTs involving UHAs with only one nested randomised study evaluating a recruitment intervention. Among the remaining studies, methods to optimise recruitment focused on how to improve information provision in the prehospital setting and use of screening logs. Future research in this setting should focus on the prospective evaluation of the well-developed interventions to optimise recruitment. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Speech Understanding in Noise in the Bison Command, Control, Communications and Intelligence (C3I) Mobile Command Post (MCP)

DTIC Science & Technology

2010-12-01

messages étaient présentés au moyen des haut-parleurs en présence de bruit dans le véhicule. Même si des notes relativement faibles ont été obtenues...Research Ethics Committee. Each subject read the protocol and provided informed consent before participating. The terms and conditions of remuneration

Coalitions: Organizational, Political, Command & Control Challenges

DTIC Science & Technology

2009-05-01

coalitions, leur histoire récente, les caractéristiques et les défis des coalitions militaires et, enfin, les obstacles rencontrés par les...caractéristiques générales. Une brève histoire des coalitions militaires du 20ième siècle est présentée, suivie d’une évaluation de leur évolution

76 FR 44259 - Addition of Certain Persons on the Entity List: Addition of Persons Acting Contrary to the...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-25

... are placed on the Entity List on the basis of certain sections of part 744 (Control Policy: End-User... (1) Biznest, LTD, Room 927 9/F Far East Consortium Building, 121 Des Voeux Road C, Central District, Hong Kong; and (2) Yeraz, LTD, Room 927 9/F Far East Consortium Building, 121 Des Voeux Road C, Central...

A new paradigm in personal dosimetry using LiF:Mg,Cu,P.

PubMed

Cassata, J R; Moscovitch, M; Rotunda, J E; Velbeck, K J

2002-01-01

The United States Navy has been monitoring personnel for occupational exposure to ionising radiation since 1947. Film was exclusively used until 1973 when thermoluminescence dosemeters were introduced and used to the present time. In 1994, a joint research project between the Naval Dosimetry Center, Georgetown University, and Saint Gobain Crystals and Detectors (formerly Bicron RMP formerly Harshaw TLD) began to develop a state of the art thermoluminescent dosimetry system. The study was conducted from a large-scale dosimetry processor point of view with emphasis on a systems approach. Significant improvements were achieved by replacing the LiF:Mg,Ti with LiF:Mg,Cu,P TL elements due to the significant sensitivity increase, linearity, and negligible hiding. Dosemeter filters were optimised for gamma and X ray energy discrimination using Monte Carlo modelling (MCNP) resulting in significant improvement in accuracy and precision. Further improvements were achieved through the use of neural-network based dose calculation algorithms. Both back propagation and functional link methods were implemented and the data compared with essentially the same results. Several operational aspects of the system are discussed, including (1) background subtraction using control dosemeters, (2) selection criteria for control dosemeters, (3) optimisation of the TLD readers, (4) calibration methodology, and (5) the optimisation of the heating profile.

Seroprevalence of Sheep and Goat Pox, Peste Des Petits Ruminants and Rift Valley Fever in Saudi Arabia.

PubMed

Boshra, Hani; Truong, Thang; Babiuk, Shawn; Hemida, Maged Gomaa

2015-01-01

Sheep and goat pox, peste des petits ruminants and Rift Valley fever are important diseases of small ruminant livestock. Sheep and goat pox, along with peste des petits ruminants, are endemic throughout most of Africa, Asia and the Middle East. Whereas Rift Valley fever is endemic in Africa, outbreaks in the Middle East have been reported over the past decade, including the Arabian Peninsula. Saudi Arabia is a major importer of livestock, and understanding the prevalence of these viral infections would be useful for disease control. In this study, sera from sheep and goats were collected from 3 regions in Saudi Arabia. They were evaluated for antibodies specific to sheep and goat pox, peste des petits ruminants and Rift Valley fever by virus neutralization assays. To the best of our knowledge, this is the first study to evaluate the seroprevalence of these viruses in sheep and goats.

Goal setting with type 2 diabetes: a hermeneutic analysis of the experiences of diabetes educators.

PubMed

Fleming, Susan E; Boyd, Angela; Ballejos, Miriam; Kynast-Gales, Susan A; Malemute, Charlene L; Armstrong Shultz, Jill; Vandermause, Roxanne K

2013-01-01

The purpose of this study was to explicate and interpret common experiences of diabetes educators (DEs) with patient goal setting for patients with type 2 diabetes in diabetes education. Transcripts (n = 10) from semi-structured interviews were analyzed using a hermeneutic phenomenological approach to more deeply explore the accounts of DEs' goal setting with patients with type 2 diabetes. The overarching pattern that emerged was "Striking a Balance," which subsumed 4 subthemes: Applying Theoretical-Practical Principles When Setting Goals, Identifying Idealistic-Realistic Expectations, Creating Patient-Educator-Centered Plans, and Readying-Living With Goal Setting. The pattern, "Striking a Balance," revealed a common meaning of DEs as experiences requiring balance and nuance in goal setting with patients. The results of this study combined with the tenets of the self-determination theory can provide the DEs with real-life exemplars and a theoretical framework to encourage their patients to self-manage, increase intrinsic motivation, and improve adherence related to their lifestyle changes and glycemic control. DEs, as facilitators of change, can implement these changes with flexible and reciprocal activities with their patients. The DEs owned these activities and they are: "building the bond," "sharing the session," "readying for change," "sending them home," and "bringing them back."

Long-term efficacy and safety of biodegradable-polymer biolimus-eluting stents: main results of the Basel Stent Kosten-Effektivitäts Trial-PROspective Validation Examination II (BASKET-PROVE II), a randomized, controlled noninferiority 2-year outcome trial.

PubMed

Kaiser, Christoph; Galatius, Soeren; Jeger, Raban; Gilgen, Nicole; Skov Jensen, Jan; Naber, Christoph; Alber, Hannes; Wanitschek, Maria; Eberli, Franz; Kurz, David J; Pedrazzini, Giovanni; Moccetti, Tiziano; Rickli, Hans; Weilenmann, Daniel; Vuillomenet, André; Steiner, Martin; Von Felten, Stefanie; Vogt, Deborah R; Wadt Hansen, Kim; Rickenbacher, Peter; Conen, David; Müller, Christian; Buser, Peter; Hoffmann, Andreas; Pfisterer, Matthias

2015-01-06

Biodegradable-polymer drug-eluting stents (BP-DES) were developed to be as effective as second-generation durable-polymer drug-eluting stents (DP-DES) and as safe >1 year as bare-metal stents (BMS). Thus, very late stent thrombosis (VLST) attributable to durable polymers should no longer appear. To address these early and late aspects, 2291 patients presenting with acute or stable coronary disease needing stents ≥3.0 mm in diameter between April 2010 and May 2012 were randomly assigned to biolimus-A9-eluting BP-DES, second-generation everolimus-eluting DP-DES, or thin-strut silicon-carbide-coated BMS in 8 European centers. All patients were treated with aspirin and risk-adjusted doses of prasugrel. The primary end point was combined cardiac death, myocardial infarction, and clinically indicated target-vessel revascularization within 2 years. The combined secondary safety end point was a composite of VLST, myocardial infarction, and cardiac death. The cumulative incidence of the primary end point was 7.6% with BP-DES, 6.8% with DP-DES, and 12.7% with BMS. By intention-to-treat BP-DES were noninferior (predefined margin, 3.80%) compared with DP-DES (absolute risk difference, 0.78%; -1.93% to 3.50%; P for noninferiority 0.042; per protocol P=0.09) and superior to BMS (absolute risk difference, -5.16; -8.32 to -2.01; P=0.0011). The 3 stent groups did not differ in the combined safety end point, with no decrease in events >1 year, particularly VLST with BP-DES. In large vessel stenting, BP-DES appeared barely noninferior compared with DP-DES and more effective than thin-strut BMS, but without evidence for better safety nor lower VLST rates >1 year. Findings challenge the concept that durable polymers are key in VLST formation. http://www.clinicaltrials.gov. Unique identifier: NCT01166685. © 2014 American Heart Association, Inc.

Optimisation des trajectoires d'un systeme de gestion de vol d'avions pour la reduction des couts de vol

NASA Astrophysics Data System (ADS)

Sidibe, Souleymane

The implementation and monitoring of operational flight plans is a major occupation for a crew of commercial flights. The purpose of this operation is to set the vertical and lateral trajectories followed by airplane during phases of flight: climb, cruise, descent, etc. These trajectories are subjected to conflicting economical constraints: minimization of flight time and minimization of fuel consumed and environmental constraints. In its task of mission planning, the crew is assisted by the Flight Management System (FMS) which is used to construct the path to follow and to predict the behaviour of the aircraft along the flight plan. The FMS considered in our research, particularly includes an optimization model of flight only by calculating the optimal speed profile that minimizes the overall cost of flight synthesized by a criterion of cost index following a steady cruising altitude. However, the model based solely on optimization of the speed profile is not sufficient. It is necessary to expand the current optimization for simultaneous optimization of the speed and altitude in order to determine an optimum cruise altitude that minimizes the overall cost when the path is flown with the optimal speed profile. Then, a new program was developed. The latter is based on the method of dynamic programming invented by Bellman to solve problems of optimal paths. In addition, the improvement passes through research new patterns of trajectories integrating ascendant cruises and using the lateral plane with the effect of the weather: wind and temperature. Finally, for better optimization, the program takes into account constraint of flight domain of aircrafts which utilize the FMS.

Assessing communication as one of the drivers of urban resilience to weather extremes.

NASA Astrophysics Data System (ADS)

Vicari, Rosa; Schertzer, Daniel

2016-04-01

The quality of science and technology communication has become more challenging due to the fact that access to information has hugely increased in terms of variety and quantity. This is a consequence of different factors, among others the development of public relations by research institutes and the pervasive role of digital media (Bucchi 2013; Trench 2008). A key question is how can we objectively assess science and technology communication? Relatively few studies have been dedicated to the definition of pertinent indicators and standards (Neresini and Bucchi 2011). This research aims to understand how communication strategies, addressed to the general public, can optimise the impact of research findings in hydrology for resilient cities and how this can be assessed. Indeed urban resilience to extreme weather events relies both on engineering solutions and increased awareness of urban communities as it was highlighted by the FP7 SMARTesT project and the experiences carried out in the framework of TOMACS (Tokyo Metropolitan Area Convective Studies for Resilient Cities) and CASA (Engineering Research Center for Collaborative Adaptative Sensing of the Atmosphere, supported by the U.S. National Science Foundation). Communication assessment should be included in an alternative approach to evaluate urban resilience to weather extremes. Various qualitative and quantitative methods to monitor communication exist. According to this study, resilience indicators shouldn't only consider communication infrastructures but should also assess communication processes and their interactions with other resilience drivers; furthermore quantitative variables are considered as particularly relevant. Last, but not least, interesting inputs are provided by those case studies that exploit resilience assessment campaigns as an opportunity to practice participatory communication. This research is being led in the framework of the Chair Hydrology for Resilient Cities, co-founded by Veolia, Fondation des Ponts, and École des Ponts ParisTech.

Tanlock loop noise reduction using an optimised phase detector

NASA Astrophysics Data System (ADS)

Al-kharji Al-Ali, Omar; Anani, Nader; Al-Qutayri, Mahmoud; Al-Araji, Saleh

2013-06-01

This article proposes a time-delay digital tanlock loop (TDTL), which uses a new phase detector (PD) design that is optimised for noise reduction making it amenable for applications that require wide lock range without sacrificing the level of noise immunity. The proposed system uses an improved phase detector design which uses two phase detectors; one PD is used to optimise the noise immunity whilst the other is used to control the acquisition time of the TDTL system. Using the modified phase detector it is possible to reduce the second- and higher-order harmonics by at least 50% compared with the conventional TDTL system. The proposed system was simulated and tested using MATLAB/Simulink using frequency step inputs and inputs corrupted with varying levels of harmonic distortion. A hardware prototype of the system was implemented using a field programmable gate array (FPGA). The practical and simulation results indicate considerable improvement in the noise performance of the proposed system over the conventional TDTL architecture.

Consideration of plant behaviour in optimal servo-compensator design

NASA Astrophysics Data System (ADS)

Moase, W. H.; Manzie, C.

2016-07-01

Where the most prevalent optimal servo-compensator formulations penalise the behaviour of an error system, this paper considers the problem of additionally penalising the actual states and inputs of the plant. Doing so has the advantage of enabling the penalty function to better resemble an economic cost. This is especially true of problems where control effort needs to be sensibly allocated across weakly redundant inputs or where one wishes to use penalties to soft-constrain certain states or inputs. It is shown that, although the resulting cost function grows unbounded as its horizon approaches infinity, it is possible to formulate an equivalent optimisation problem with a bounded cost. The resulting optimisation problem is similar to those in earlier studies but has an additional 'correction term' in the cost function, and a set of equality constraints that arise when there are redundant inputs. A numerical approach to solve the resulting optimisation problem is presented, followed by simulations on a micro-macro positioner that illustrate the benefits of the proposed servo-compensator design approach.

Ageing Mechanisms and Control. Specialists’ Meeting on Life Management Techniques for Ageing Air Vehicles (Les mecanismes vieillissants et le controle) (Reunions des specialistes des techniques de gestion du cycle de vie pour vehicules aeriens vieillissants)

DTIC Science & Technology

2003-02-01

Beam Weld Repair and Qualification of Titanium Fan Blades for Military Gas Turbine Engines”, NATO-RTO-AVT Workshop on Cost Effective Applications of...announced in the Meeting Announcement Research of Extension of the Life Cycle of Helicopter Rotor Blade in Hungary 39 by M. Balaskó, G. Endröczi, J...and Power Systems MP-069(I), February 2003 Low Cost Composite Structures / Cost Effective Application of Titanium Alloys in Military Platforms MP-069

Automated Software Generation Approaches for the Design and Development of Guidance and Control Systems Software (Les Differentes Approches Generation pour la Conception et le Developpement de Logiciels de Guidage et de Pilotage)

DTIC Science & Technology

1992-03-01

de Logiciels") etaient en cours de developpement pour resoudre des problimes similaires dans le monde de la gestion . le Panel... gestion des sp cifications, d’algorithmes et de reprtsentations. Techniques et Sciences Informatiques, 4(3), 1985. 4-21 R. Jacquart, M. Lemoine, and G...Guidance and Control Systems Software (Les Diff~rentes Approches "G6neration" pour la Conception et le D~veloppement de Logiciels de Guidage et de

Detection de la fin de la compaction des anodes par le son

NASA Astrophysics Data System (ADS)

Sanogo, Bazoumana

L'objectif de ce projet etait de developper un outil de controle en temps reel du temps de compaction en se servant du son genere par le vibrocompacteur pendant le formage des anodes crues. Ainsi, une application a ete developpee pour l'analyse des sons enregistres. Des essais ont ete realises avec differents microphones pour une meilleure qualite des mesures et un a ete choisi pour la suite du projet. De meme, differents tests ont ete realises sur des anodes de laboratoire ainsi que des anodes a l'echelle industrielle afin de mettre en place une methode pour la detection du temps optimal necessaire au formage des anodes. Les travaux au laboratoire de carbone a l'Universite du Quebec a Chicoutimi (UQAC) ont consiste a l'enregistrement de son des anodes fabriquees sur place avec differentes configurations; et a la caracterisation de certaines anodes de l'usine. Les anodes fabriquees au laboratoire sont reparties en deux groupes. Le premier regroupe les anodes pour la validation de notre methode. Ce sont des anodes produites avec des temps de compaction differents. Le laboratoire de carbone a l'UQAC est unique et il est possible de produire des anodes avec les memes proprietes que celles des anodes industrielles. Par consequent, la validation initialement prevue a l'usine a ete effectuee avec les anodes de laboratoire. Le deuxieme groupe a servi a etudier les effets des matieres premieres sur le temps de compaction. Le type de coke et le type de brai ont constitue les differentes variations dans ce deuxieme groupe. Quant aux tests et mesures a l'usine, ils ont ete realises en trois campagnes de mesure. La premiere campagne en juin 2014 a servi a standardiser et a trouver le meilleur positionnement des appareils pour les mesures, a regler le logiciel et a faire les premieres mesures. Une deuxieme campagne en mai 2015 a fait l'objet d'enregistrement de son en classant les anodes selon differents temps de compaction. La troisieme et derniere campagne en decembre 2015 a ete le lieu de tests finaux a l'usine en fabriquant des anodes avec differents criteres (variation du temps de compaction, taux de brai, arret manuel du compacteur, variation de la pression des ballons du haut du compacteur). Ces anodes ont ete ensuite analysees au laboratoire a l'UQAC. En parallele a ces travaux precites, l'amelioration de l'application d'analyse du son a ete faite avec le choix des parametres d'analyse et leur standardisation. Les resultats des premiers tests au laboratoire et ceux de la campagne de juin 2014 ont montre que la formation des anodes se fait suivant trois etapes : rearrangement des particules et du brai, compaction et consolidation et enfin la finition. Ces travaux ont montre en outre que le temps de compaction joue un role tres important dans la definition des proprietes finales des anodes. Ainsi, en plus du type de brai, du taux de brai et du type de coke, il faut tenir compte du temps de sur-compaction et de sous-compaction. En effet, ceci a ete demontre a travers les deux validations qui ont ete realisees. Les resultats de la caracterisation des echantillons (venant des anodes de la campagne de decembre 2015) ont montre qu'une anode compactee a un temps optimal acquiert une bonne resistance a la compression et sa resistivite electrique baisse. En outre, on note que le temps de compaction dans notre cas a baisse legerement avec l'augmentation de la pression des ballons de haut du vibrocompacteur. Ce qui a eu pour effet d'augmenter la densite crue de l'anode. Toutefois, il faut s'abstenir de generaliser ce constat car le nombre d'anodes testees est faible dans notre cas. Par ailleurs, cette etude montre que le temps necessaire pour le formage d'une anode croit avec l'augmentation du taux de brai et baisse legerement avec l'augmentation de la pression des ballons. (Abstract shortened by ProQuest.).

A modelling framework for predicting the optimal balance between control and surveillance effort in the local eradication of tuberculosis in New Zealand wildlife.

PubMed

Gormley, Andrew M; Holland, E Penelope; Barron, Mandy C; Anderson, Dean P; Nugent, Graham

2016-03-01

Bovine tuberculosis (TB) impacts livestock farming in New Zealand, where the introduced marsupial brushtail possum (Trichosurus vulpecula) is the wildlife maintenance host for Mycobacterium bovis. New Zealand has implemented a campaign to control TB using a co-ordinated programme of livestock diagnostic testing and large-scale culling of possums, with the long-term aim of TB eradication. For management of the disease in wildlife, methods that can optimise the balance between control and surveillance effort will facilitate the objective of eradication on a fixed or limited budget. We modelled and compared management options to optimise the balance between the two activities necessary to achieve and verify eradication of TB from New Zealand wildlife: the number of lethal population control operations required to halt the M. bovis infection cycle in possums, and the subsequent surveillance effort needed to confidently declare TB freedom post-control. The approach considered the costs of control and surveillance, as well as the potential costs of re-control resulting from false declaration of TB freedom. The required years of surveillance decreased with increasing numbers of possum lethal control operations but the overall time to declare TB freedom depended on additional factors, such as the probability of freedom from disease after control and the probability of success of mop-up control, i.e. retroactive culling following detection of persistent disease in the residual possum population. The total expected cost was also dependent on a number of factors, many of which had wide cost ranges, suggesting that an optimal strategy is unlikely to be singular and fixed, but will likely vary for each different area being considered. Our approach provides a simple framework that considers the known and potential costs of possum control and TB surveillance, enabling managers to optimise the balance between these two activities to achieve and prove eradication of a wildlife disease, or the pest species that transmits it, in the most expedient and economic way. This cost- and risk-evaluation approach may be applicable to other wildlife disease problems where limited management funds exist. Copyright © 2016 Elsevier B.V. All rights reserved.

Methodologie experimentale pour evaluer les caracteristiques des plateformes graphiques avioniques

NASA Astrophysics Data System (ADS)

Legault, Vincent

Within a context where the aviation industry intensifies the development of new visually appealing features and where time-to-market must be as short as possible, rapid graphics processing benchmarking in a certified avionics environment becomes an important issue. With this work we intend to demonstrate that it is possible to deploy a high-performance graphics application on an avionics platform that uses certified graphical COTS components. Moreover, we would like to bring to the avionics community a methodology which will allow developers to identify the needed elements for graphics system optimisation and provide them tools that can measure the complexity of this type of application and measure the amount of resources to properly scale a graphics system according to their needs. As far as we know, no graphics performance profiling tool dedicated to critical embedded architectures has been proposed. We thus had the idea of implementing a specialized benchmarking tool that would be an appropriate and effective solution to this problem. Our solution resides in the extraction of the key graphics specifications from an inherited application to use them afterwards in a 3D image generation application.

Optimisation des structures métalliques fléchies dans un calcul plastique

NASA Astrophysics Data System (ADS)

Geara, F.; Raphael, W.; Kaddah, F.

2005-05-01

The steel structure is a type of construction that is very developed in civil engineering. In the phase of survey and then of execution and installation of a metal work, the phase of conception is often the place of discontinuities that prevents the global optimization of material steel. In our survey, we used the traditional approach of optimization that is essentially based on the minimization of the weight of the structure, while taking advantages of plastic properties of steel in the case of a bending structure. It has been permitted because of to the relation found between the areas of the sections of the steel elements and the plastic moment of these sections. These relations have been drawn for different types of steel. In order to take advantages of the linear programming, a simplification has been introduced in transforming these relation to linear relations, which permits us to use simple methods as the simplex theorem. This procedure proves to be very interesting in the first phases of the survey and give very interesting results.

Development and psychometric evaluation of the Decisional Engagement Scale (DES-10): A patient-reported psychosocial survey for quality cancer care.

PubMed

Hoerger, Michael; Chapman, Benjamin P; Mohile, Supriya G; Duberstein, Paul R

2016-09-01

In light of recent health care reforms, we have provided an illustrative example of new opportunities available for psychologists to develop patient-reported measures related to health care quality. Patient engagement in health care decision making has been increasingly acknowledged as a vital component of quality cancer care. We developed the 10-item Decisional Engagement Scale (DES-10), a patient-reported measure of engagement in decision making in cancer care that assesses patients' awareness of their diagnosis, sense of empowerment and involvement, and level of information seeking and planning. The National Institutes of Health's ResearchMatch recruitment tool was used to facilitate Internet-mediated data collection from 376 patients with cancer. DES-10 scores demonstrated good internal consistency reliability (α = .80), and the hypothesized unidimensional factor structure fit the data well. The reliability and factor structure were supported across subgroups based on demographic, socioeconomic, and health characteristics. Higher DES-10 scores were associated with better health-related quality of life (r = .31). In concurrent validity analyses controlling for age, socioeconomic status, and health-related quality of life, higher DES-10 scores were associated with higher scores on quality-of-care indices, including greater awareness of one's treatments, greater preferences for shared decision making, and clearer preferences about end-of-life care. A mini-measure, the DES-3, also performed well psychometrically. In conclusion, DES-10 and DES-3 scores showed evidence of reliability and validity, and these brief patient-reported measures can be used by researchers, clinicians, nonprofits, hospitals, insurers, and policymakers interested in evaluating and improving the quality of cancer care. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

A knowledge-based control system for air-scour optimisation in membrane bioreactors.

PubMed

Ferrero, G; Monclús, H; Sancho, L; Garrido, J M; Comas, J; Rodríguez-Roda, I

2011-01-01

Although membrane bioreactors (MBRs) technology is still a growing sector, its progressive implementation all over the world, together with great technical achievements, has allowed it to reach a mature degree, just comparable to other more conventional wastewater treatment technologies. With current energy requirements around 0.6-1.1 kWh/m3 of treated wastewater and investment costs similar to conventional treatment plants, main market niche for MBRs can be areas with very high restrictive discharge limits, where treatment plants have to be compact or where water reuse is necessary. Operational costs are higher than for conventional treatments; consequently there is still a need and possibilities for energy saving and optimisation. This paper presents the development of a knowledge-based decision support system (DSS) for the integrated operation and remote control of the biological and physical (filtration and backwashing or relaxation) processes in MBRs. The core of the DSS is a knowledge-based control module for air-scour consumption automation and energy consumption minimisation.

Impact of Emerging NDE-NDI Methods on Aircraft Design, Manufacture and Maintenance (L’Impact des Nouvelles Methodes d’Examen Non Destructif et de Controle Non Destructif (NDE-NDI) sur la Conception, la Fabrication et la Maintenance des Aeronefs)

DTIC Science & Technology

1990-03-01

4, Constater Ics imperfections 6ventuellcs du mat6riel (I inspection disponible i l’hure actuelle et les besoins die normalisation cn cc qui...et rapide et leurs propri~t~s particulibres notamlent dianisotropie, font qu’il n’y a pas ou peu do donn6es disponibles . Des mrhthodes sp~cifiques ont...Illuminateurs sont disponibles en fonction du mat6rIau et de l’environnement (Fig.8) :A tubes A 6clairs, A tubes Infrarouges. LeGs illuminateurs sont

Intelligent Adaptive Interfaces: Summary Report on Design, Development, and Evaluation of Intelligent Adaptive Interfaces for the Control of Multiple UAVs from an Airborne Platform

DTIC Science & Technology

2006-12-01

gestion de la masse d’informations nécessaires pour appuyer la prise de décision efficace. De l’avis des opérateurs d’engins télépilotés...opérateurs d’engins télépilotés risque de croître exponentiellement, de sorte que de fortes contraintes seront imposées au personnel exécutant les missions...commande réelle des engins télépilotés que la gestion des données, y compris la conversion de ces données en information et l’acheminement

Etude du pronostic maternel et périnatal au cours de l’accouchement chez l’adolescente à Lubumbashi, République Démocratique du Congo

PubMed Central

Luhete, Prosper Kakudji; Mukuku, Olivier; Tambwe, Albert Mwembo; Kayamba, Prosper Kalenga Muenze

2017-01-01

Introduction L’objectif de cette étude était de déterminer la fréquence et d’évaluer le pronostic maternel et périnatal lors de l’accouchement chez les adolescentes dans la ville de Lubumbashi. Méthodes C’était une étude cas-témoin des accouchées d’une grossesse monofoetale de Décembre 2013 à Mai 2014 dans 10 maternités de référence à Lubumbashi (RD Congo). Les adolescentes (< 20 ans) ont été comparées aux femmes âgées de 20-34 ans. Les paramètres sociodémographiques maternels, la morbi-mortalité maternelle et périnatale ont été analysées. Les statistiques usuelles et la régression logistique ont été utilisées pour analyser les résultats. Le seuil de signification a été fixé à une valeur de p<0,05. Résultats La fréquence d’accouchement chez les adolescentes était de 7,7%. Nous avons observé que la césarienne (ORa=1,9 (1,1-3,1)), l’épisiotomie (ORa=4,2 (2,9-5,9)), la délivrance pathologique (ORa= 2,7 (1,1-6,5)), l’éclampsie (ORa= 4,4 (1,3-14,5)) et le faible poids de naissance (ORa=2,0 (1,3-3,0)) ont été significativement plus élevés chez les adolescentes que chez les adultes. Conclusion L’accouchement chez les adolescentes, comparativement à celui de femmes âgées de 20-34 ans, reste associé à un mauvais pronostic. D’où l’organisation des séances de sensibilisation pour une meilleure fréquentation des services consultations prénatales, une optimisation du dépistage, de la surveillance et de la prévention des pathologies de la grossesse chez les adolescentes s’avère importante et urgente. Introduction This study aimed to determine the frequency and to assess maternal and perinatal prognosis for vaginal delivery in adolescent girls in the city of Lubumbashi. Methods We conducted a case-control study of vaginal deliveries in singleton pregnancy in 10 referral hospitals in Lubumbashi (DR Congo) from December 2013 to May 2014. Adolescent girls (< 20 years) were compared to older women aged 20-34 years. Maternal sociodemographic parameters, morbi-maternal and perinatal mortality were analyzed. Usual statistics and logistic regression were used to analyze the results. The significance level was set at p <0.05. Results Vaginal delivery rate among adolescent girls was 7.7%. Cesarean section (OR=1.9 (1.1-3.1)), episiotomy (OR=4.2 (2.9-5.9)), pathological delivery (OR=2.7 (1.1-6.5)), eclampsia (OR=4.4 (1.3-14.5)) and low birth weight (OR=2.0 (1.3-3.0)) were significantly higher among adolescent girls than in adults. Conclusion Vaginal delivery in adolescent girls, compared to that of older women aged 20-34 years, is associated with a poor prognosis. Hence the importance and the urgent need to implement awareness sessions to increase attendance to prenatal consultation services, for screening optimization, monitoring and prevention for pregnancy pathologies in adolescent girls. PMID:28674575

Molecular Biology and Prevention of Endometrial Cancer

DTIC Science & Technology

2009-07-01

us time to complete the study. Aim 2: To analyze vaginal and cervical adenocarcinomas , that have arisen in women exposed to DES in- utero , for...therapy. Methods: 1) Oligonucleotide microarray analysis was performed on a panel of endometrial cancers. 2) A subset of adenocarcinoma cases...from the International DES Registry (IDESR) was analyzed for MSI 3) A case-control study of the CASH database was performed to evaluate the

Detection of chromosomal aberrations by fluorescence in situ hybridization in cervicovaginal biopsies from women exposed to diethylstilbestrol in utero.

PubMed

Hajek, R A; King, D W; Hernández-Valero, M A; Kaufman, R H; Liang, J C; Chilton, J A; Edwards, C L; Wharton, J T; Jones, L A

2006-01-01

Epidemiologic studies have associated estrogens with human neoplasms such as those in the endometrium, cervix, vagina, breast, and liver. Perinatal exposure to natural (17beta-estradiol [17beta-E(2)]) and synthetic (diethylstilbestrol [DES]) estrogens induces neoplastic changes in humans and rodents. Previous studies demonstrated that neonatal 17beta-E(2) treatment of mice results in increased nuclear DNA content of cervicovaginal epithelium that precedes histologically evident neoplasia. In order to determine whether this effect was associated with chromosomal changes in humans, the frequencies of trisomy of chromosomes 1, 7, 11, and 17 were evaluated by the fluorescence in situ hybridization (FISH) technique in cervicovaginal tissue from 19 DES-exposed and 19 control women. The trisomic frequencies were significantly elevated in 4 of the 19 (21%) DES-exposed patients. One patient presented with trisomy of chromosomes 1, 7, and 11, while trisomy of chromosome 7 was observed in one patient. There were two patients with trisomy of chromosome 1. Trisomy of chromosomes 1, 7, 11, and 17 was not observed in the cervicovaginal tissue taken from control patients. These data suggest that DES-induced chromosomal trisomy may be an early event in the development of cervicovaginal neoplasia in humans.

Developpement de techniques de diagnostic non intrusif par tomographie optique

NASA Astrophysics Data System (ADS)

Dubot, Fabien

Que ce soit dans les domaines des procedes industriels ou de l'imagerie medicale, on a assiste ces deux dernieres decennies a un developpement croissant des techniques optiques de diagnostic. L'engouement pour ces methodes repose principalement sur le fait qu'elles sont totalement non invasives, qu'elle utilisent des sources de rayonnement non nocives pour l'homme et l'environnement et qu'elles sont relativement peu couteuses et faciles a mettre en oeuvre comparees aux autres techniques d'imagerie. Une de ces techniques est la Tomographie Optique Diffuse (TOD). Cette methode d'imagerie tridimensionnelle consiste a caracteriser les proprietes radiatives d'un Milieu Semi-Transparent (MST) a partir de mesures optiques dans le proche infrarouge obtenues a l'aide d'un ensemble de sources et detecteurs situes sur la frontiere du domaine sonde. Elle repose notamment sur un modele direct de propagation de la lumiere dans le MST, fournissant les predictions, et un algorithme de minimisation d'une fonction de cout integrant les predictions et les mesures, permettant la reconstruction des parametres d'interet. Dans ce travail, le modele direct est l'approximation diffuse de l'equation de transfert radiatif dans le regime frequentiel tandis que les parametres d'interet sont les distributions spatiales des coefficients d'absorption et de diffusion reduit. Cette these est consacree au developpement d'une methode inverse robuste pour la resolution du probleme de TOD dans le domaine frequentiel. Pour repondre a cet objectif, ce travail est structure en trois parties qui constituent les principaux axes de la these. Premierement, une comparaison des algorithmes de Gauss-Newton amorti et de Broyden- Fletcher-Goldfarb-Shanno (BFGS) est proposee dans le cas bidimensionnel. Deux methodes de regularisation sont combinees pour chacun des deux algorithmes, a savoir la reduction de la dimension de l'espace de controle basee sur le maillage et la regularisation par penalisation de Tikhonov pour l'algorithme de Gauss-Newton amorti, et les regularisations basees sur le maillage et l'utilisation des gradients de Sobolev, uniformes ou spatialement dependants, lors de l'extraction du gradient de la fonction cout, pour la methode BFGS. Les resultats numeriques indiquent que l'algorithme de BFGS surpasse celui de Gauss-Newton amorti en ce qui concerne la qualite des reconstructions obtenues, le temps de calcul ou encore la facilite de selection du parametre de regularisation. Deuxiemement, une etude sur la quasi-independance du parametre de penalisation de Tikhonov optimal par rapport a la dimension de l'espace de controle dans les problemes inverses d'estimation de fonctions spatialement dependantes est menee. Cette etude fait suite a une observation realisee lors de la premiere partie de ce travail ou le parametre de Tikhonov, determine par la methode " L-curve ", se trouve etre independant de la dimension de l'espace de controle dans le cas sous-determine. Cette hypothese est demontree theoriquement puis verifiee numeriquement sur un probleme inverse lineaire de conduction de la chaleur puis sur le probleme inverse non-lineaire de TOD. La verification numerique repose sur la determination d'un parametre de Tikhonov optimal, defini comme etant celui qui minimise les ecarts entre les cibles et les reconstructions. La demonstration theorique repose sur le principe de Morozov (discrepancy principle) dans le cas lineaire, tandis qu'elle repose essentiellement sur l'hypothese que les fonctions radiatives a reconstruire sont des variables aleatoires suivant une loi normale dans le cas non-lineaire. En conclusion, la these demontre que le parametre de Tikhonov peut etre determine en utilisant une parametrisation des variables de controle associee a un maillage lâche afin de reduire les temps de calcul. Troisiemement, une methode inverse multi-echelle basee sur les ondelettes associee a l'algorithme de BFGS est developpee. Cette methode, qui s'appuie sur une reformulation du probleme inverse original en une suite de sous-problemes inverses de la plus grande echelle a la plus petite, a l'aide de la transformee en ondelettes, permet de faire face a la propriete de convergence locale de l'optimiseur et a la presence de nombreux minima locaux dans la fonction cout. Les resultats numeriques montrent que la methode proposee est plus stable vis-a-vis de l'estimation initiale des proprietes radiatives et fournit des reconstructions finales plus precises que l'algorithme de BFGS ordinaire tout en necessitant des temps de calcul semblables. Les resultats de ces travaux sont presentes dans cette these sous forme de quatre articles. Le premier article a ete accepte dans l'International Journal of Thermal Sciences, le deuxieme est accepte dans la revue Inverse Problems in Science and Engineering, le troisieme est accepte dans le Journal of Computational and Applied Mathematics et le quatrieme a ete soumis au Journal of Quantitative Spectroscopy & Radiative Transfer. Dix autres articles ont ete publies dans des comptes-rendus de conferences avec comite de lecture. Ces articles sont disponibles en format pdf sur le site de la Chaire de recherche t3e (www.t3e.info).

Evaluation of biodegradable paclitaxel-eluting nanofibre-covered metal stents for the treatment of benign cardia stricture in an experimental model.

PubMed

Zhu, Y-Q; Cui, W-G; Cheng, Y-S; Chang, J; Chen, N-W; Yan, L

2013-05-01

Benign strictures at the cardia are troublesome for patients and often require repeated endoscopic treatments. Paclitaxel can reduce fibrosis. This study evaluated a biodegradable paclitaxel-eluting nanofibre-covered metal stent for the treatment of benign cardia stricture in vitro and in vivo. Drug release was investigated in vitro at pH 7·4 and 4·0. Eighty dogs were divided randomly into four groups (each n = 20): controls (no stent), bare stent (retained for 1 week), and two drug-eluting stent (DES) groups with retention for either 1 week (DES-1w) or 4 weeks (DES-4w). Lower oesophageal sphincter pressure (LOSP) and 5-min barium height (5-mBH) were assessed before, immediately after stent deployment, at 1 week, and 1, 3 and 6 months later. Five dogs in each group were killed for histological examination at each follow-up point. Stent migration rates were similar (0 bare stent versus 2 DES; P = 0·548). The percentage and amount of paclitaxel released in vitro was higher at pH 4·0 than at pH 7·4. After 6 months, LOSP and 5-mBH were both improved in the DES-1w (P = 0·004 and P = 0·049) and DES-4w (both P < 0·001) groups compared with the bare-stent group, with better relief when the stent was retained for 4 weeks (P = 0·004 and P = 0·007). The DES was associated with a reduced peak inflammatory reaction and less scar formation compared with bare stents, especially when inserted for 4 weeks. The DES was more effective for the treatment of benign cardia stricture than bare stents in a canine model. Retention of the DES for 4 weeks led to a better clinical and pathological outcome than 1 week. © 2013 British Journal of Surgery Society Ltd. Published by John Wiley & Sons Ltd.

Using Optimisation Techniques to Granulise Rough Set Partitions

NASA Astrophysics Data System (ADS)

Crossingham, Bodie; Marwala, Tshilidzi

2007-11-01

This paper presents an approach to optimise rough set partition sizes using various optimisation techniques. Three optimisation techniques are implemented to perform the granularisation process, namely, genetic algorithm (GA), hill climbing (HC) and simulated annealing (SA). These optimisation methods maximise the classification accuracy of the rough sets. The proposed rough set partition method is tested on a set of demographic properties of individuals obtained from the South African antenatal survey. The three techniques are compared in terms of their computational time, accuracy and number of rules produced when applied to the Human Immunodeficiency Virus (HIV) data set. The optimised methods results are compared to a well known non-optimised discretisation method, equal-width-bin partitioning (EWB). The accuracies achieved after optimising the partitions using GA, HC and SA are 66.89%, 65.84% and 65.48% respectively, compared to the accuracy of EWB of 59.86%. In addition to rough sets providing the plausabilities of the estimated HIV status, they also provide the linguistic rules describing how the demographic parameters drive the risk of HIV.

Application of snakes and dynamic programming optimisation technique in modeling of buildings in informal settlement areas

NASA Astrophysics Data System (ADS)

Rüther, Heinz; Martine, Hagai M.; Mtalo, E. G.

This paper presents a novel approach to semiautomatic building extraction in informal settlement areas from aerial photographs. The proposed approach uses a strategy of delineating buildings by optimising their approximate building contour position. Approximate building contours are derived automatically by locating elevation blobs in digital surface models. Building extraction is then effected by means of the snakes algorithm and the dynamic programming optimisation technique. With dynamic programming, the building contour optimisation problem is realized through a discrete multistage process and solved by the "time-delayed" algorithm, as developed in this work. The proposed building extraction approach is a semiautomatic process, with user-controlled operations linking fully automated subprocesses. Inputs into the proposed building extraction system are ortho-images and digital surface models, the latter being generated through image matching techniques. Buildings are modeled as "lumps" or elevation blobs in digital surface models, which are derived by altimetric thresholding of digital surface models. Initial windows for building extraction are provided by projecting the elevation blobs centre points onto an ortho-image. In the next step, approximate building contours are extracted from the ortho-image by region growing constrained by edges. Approximate building contours thus derived are inputs into the dynamic programming optimisation process in which final building contours are established. The proposed system is tested on two study areas: Marconi Beam in Cape Town, South Africa, and Manzese in Dar es Salaam, Tanzania. Sixty percent of buildings in the study areas have been extracted and verified and it is concluded that the proposed approach contributes meaningfully to the extraction of buildings in moderately complex and crowded informal settlement areas.

The optimization of treatment and management of schizophrenia in Europe (OPTiMiSE) trial: rationale for its methodology and a review of the effectiveness of switching antipsychotics.

PubMed

Leucht, Stefan; Winter-van Rossum, Inge; Heres, Stephan; Arango, Celso; Fleischhacker, W Wolfgang; Glenthøj, Birte; Leboyer, Marion; Leweke, F Markus; Lewis, Shôn; McGuire, Phillip; Meyer-Lindenberg, Andreas; Rujescu, Dan; Kapur, Shitij; Kahn, René S; Sommer, Iris E

2015-05-01

Most of the 13 542 trials contained in the Cochrane Schizophrenia Group's register just tested the general efficacy of pharmacological or psychosocial interventions. Studies on the subsequent treatment steps, which are essential to guide clinicians, are largely missing. This knowledge gap leaves important questions unanswered. For example, when a first antipsychotic failed, is switching to another drug effective? And when should we use clozapine? The aim of this article is to review the efficacy of switching antipsychotics in case of nonresponse. We also present the European Commission sponsored "Optimization of Treatment and Management of Schizophrenia in Europe" (OPTiMiSE) trial which aims to provide a treatment algorithm for patients with a first episode of schizophrenia. We searched Pubmed (October 29, 2014) for randomized controlled trials (RCTs) that examined switching the drug in nonresponders to another antipsychotic. We described important methodological choices of the OPTiMiSE trial. We found 10 RCTs on switching antipsychotic drugs. No trial was conclusive and none was concerned with first-episode schizophrenia. In OPTiMiSE, 500 first episode patients are treated with amisulpride for 4 weeks, followed by a 6-week double-blind RCT comparing continuation of amisulpride with switching to olanzapine and ultimately a 12-week clozapine treatment in nonremitters. A subsequent 1-year RCT validates psychosocial interventions to enhance adherence. Current literature fails to provide basic guidance for the pharmacological treatment of schizophrenia. The OPTiMiSE trial is expected to provide a basis for clinical guidelines to treat patients with a first episode of schizophrenia. © The Author 2015. Published by Oxford University Press on behalf of the Maryland Psychiatric Research Center. All rights reserved. For permissions, please email: journals.permissions@oup.com.

Retinal plasma extravasation in streptozotocin-diabetic rats mediated by kinin B1 and B2 receptors

PubMed Central

Abdouh, M; Talbot, S; Couture, R; Hasséssian, H M

2008-01-01

Background and purpose: We investigated whether or not kinin receptors play a role in diabetic blood–retinal barrier breakdown, which is a leading cause of vision loss. Experimental approach: Blood–retinal barrier breakdown was quantified using Evans blue, and expression of kinin B1 receptor mRNA was measured using quantitative reverse transcrition-PCR. Diabetic rats (streptozotocin (STZ), 65 mg kg−1) received a single intraocular injection of bradykinin (BK) or des-Arg9-BK, alone, or in combination with antagonists for B1 (des-Arg10-Hoe140, R-715) and/or B2 (Hoe140) receptors, given intraocularly or intravenously (i.v.). Key results: In control rats, BK (0.1–10 nmol) dose-dependently increased plasma extravasation, which was inhibited by Hoe140 (0.2 nmol), whereas des-Arg9-BK (0.1 and 1 nmol) was without effect. B1 receptor mRNA was markedly increased in retinas of diabetic rats, and this was prevented by N-acetyl-L-cysteine (1 g kg−1 day−1 for 7 days). Plasma extravasation in retinas of STZ-diabetic rats was higher than in controls and enhanced by des-Arg9-BK. Response to des-Arg9-BK was inhibited by intraocular or i.v. injection of B1 receptor antagonists. Diabetes-induced plasma extravasation was inhibited only by a combination of des-Arg10-Hoe140 and Hoe 140 (100 nmol kg−1, i.v. 15 min earlier) or by R-715 (1 μmol kg−1, i.v.) injected daily for 7 days. Conclusions and implications: Kinin B1 receptors are upregulated in retinas of STZ-diabetic rats through a mechanism involving oxidative stress. Both kinin B1 and B2 receptors contribute to increased plasma extravasation in diabetic retinopathy. Chronic inhibition of both kinin receptors, possibly with antioxidant adjuvants, may be a novel therapeutic strategy for diabetic retinopathy. PMID:18311190

Analysis of optimisation method for a two-stroke piston ring using the Finite Element Method and the Simulated Annealing Method

NASA Astrophysics Data System (ADS)

Kaliszewski, M.; Mazuro, P.

2016-09-01

Simulated Annealing Method of optimisation for the sealing piston ring geometry is tested. The aim of optimisation is to develop ring geometry which would exert demanded pressure on a cylinder just while being bended to fit the cylinder. Method of FEM analysis of an arbitrary piston ring geometry is applied in an ANSYS software. The demanded pressure function (basing on formulae presented by A. Iskra) as well as objective function are introduced. Geometry definition constructed by polynomials in radial coordinate system is delivered and discussed. Possible application of Simulated Annealing Method in a piston ring optimisation task is proposed and visualised. Difficulties leading to possible lack of convergence of optimisation are presented. An example of an unsuccessful optimisation performed in APDL is discussed. Possible line of further optimisation improvement is proposed.

SASS Applied to Optimum Work Roll Profile Selection in the Hot Rolling of Wide Steel

NASA Astrophysics Data System (ADS)

Nolle, Lars

The quality of steel strip produced in a wide strip rolling mill depends heavily on the careful selection of initial ground work roll profiles for each of the mill stands in the finishing train. In the past, these profiles were determined by human experts, based on their knowledge and experience. In previous work, the profiles were successfully optimised using a self-organising migration algorithm (SOMA). In this research, SASS, a novel heuristic optimisation algorithm that has only one control parameter, has been used to find the optimum profiles for a simulated rolling mill. The resulting strip quality produced using the profiles found by SASS is compared with results from previous work and the quality produced using the original profile specifications. The best set of profiles found by SASS clearly outperformed the original set and performed equally well as SOMA without the need of finding a suitable set of control parameters.

The development and optimisation of a primary care-based whole system complex intervention (CARE Plus) for patients with multimorbidity living in areas of high socioeconomic deprivation

PubMed Central

O'Brien, Rosaleen; Fitzpatrick, Bridie; Higgins, Maria; Guthrie, Bruce; Watt, Graham; Wyke, Sally

2016-01-01

Objectives To develop and optimise a primary care-based complex intervention (CARE Plus) to enhance the quality of life of patients with multimorbidity in the deprived areas. Methods Six co-design discussion groups involving 32 participants were held separately with multimorbid patients from the deprived areas, voluntary organisations, general practitioners and practice nurses working in the deprived areas. This was followed by piloting in two practices and further optimisation based on interviews with 11 general practitioners, 2 practice nurses and 6 participating multimorbid patients. Results Participants endorsed the need for longer consultations, relational continuity and a holistic approach. All felt that training and support of the health care staff was important. Most participants welcomed the idea of additional self-management support, though some practitioners were dubious about whether patients would use it. The pilot study led to changes including a revised care plan, the inclusion of mindfulness-based stress reduction techniques in the support of practitioners and patients, and the stream-lining of the written self-management support material for patients. Discussion We have co-designed and optimised an augmented primary care intervention involving a whole-system approach to enhance quality of life in multimorbid patients living in the deprived areas. CARE Plus will next be tested in a phase 2 cluster randomised controlled trial. PMID:27068113

Guidance, Control and Positioning of Future Precision Guided Stand-off Weapons Systems

DTIC Science & Technology

1986-06-01

environment tests. The programme consists of approximately ten fl ights, the firsts having a passive nature . These are followed by progressive...Limited _. .. , 40 Chigwell Lane, Loughton, Essex IGIO 3TZ PREFACE The environment in which tactical air forces must be able to operate is becoming...GUIDANCE SYSTEM CONCEPT FOR HIGH-DYNAMIC ENVIRONMENT * by U.K.Krogmann 17 APPLICATIONS DES CENTRALES A COMPOSANTS LIES AUX MISSILES TACTIQUES: CAS DES

Molecular Biology and Prevention of Endometrial Cancer

DTIC Science & Technology

2006-07-01

adenocarcinoma cases from the International DES Registry (IDESR) was analyzed for MSI 3) A case-control study of the CASH database was performed to...that have arisen in women exposed to DES in- utero , for methylation and mutation of PTEN and MLH1 in order to determine if estrogen induces genetic...and analyzed, which would most likely take an additional 3-6 months after enrollment. Aim 2: To analyze vaginal and cervical adenocarcinomas

Molecular Biology and Prevention of Endometrial Cancer. Addendum

DTIC Science & Technology

2008-07-01

2) A subset of adenocarcinoma cases from the International DES Registry (IDESR) was analyzed for MSI 3) A case-control study of the CASH database... DES in- utero , for methylation and mutation of PTEN and MLH1 in order to determine if estrogen induces genetic alterations in these tumors...current trial within the “Gynecologic Disease Program”. Aim 2: To analyze vaginal and cervical adenocarcinomas , that have arisen in women exposed to

Neural network feedforward control of a closed-circuit wind tunnel

NASA Astrophysics Data System (ADS)

Sutcliffe, Peter

Accurate control of wind-tunnel test conditions can be dramatically enhanced using feedforward control architectures which allow operating conditions to be maintained at a desired setpoint through the use of mathematical models as the primary source of prediction. However, as the desired accuracy of the feedforward prediction increases, the model complexity also increases, so that an ever increasing computational load is incurred. This drawback can be avoided by employing a neural network that is trained offline using the output of a high fidelity wind-tunnel mathematical model, so that the neural network can rapidly reproduce the predictions of the model with a greatly reduced computational overhead. A novel neural network database generation method, developed through the use of fractional factorial arrays, was employed such that a neural network can accurately predict wind-tunnel parameters across a wide range of operating conditions whilst trained upon a highly efficient database. The subsequent network was incorporated into a Neural Network Model Predictive Control (NNMPC) framework to allow an optimised output schedule capable of providing accurate control of the wind-tunnel operating parameters. Facilitation of an optimised path through the solution space is achieved through the use of a chaos optimisation algorithm such that a more globally optimum solution is likely to be found with less computational expense than the gradient descent method. The parameters associated with the NNMPC such as the control horizon are determined through the use of a Taguchi methodology enabling the minimum number of experiments to be carried out to determine the optimal combination. The resultant NNMPC scheme was employed upon the Hessert Low Speed Wind Tunnel at the University of Notre Dame to control the test-section temperature such that it follows a pre-determined reference trajectory during changes in the test-section velocity. Experimental testing revealed that the derived NNMPC controller provided an excellent level of control over the test-section temperature in adherence to a reference trajectory even when faced with unforeseen disturbances such as rapid changes in the operating environment.

Stability and optimised H∞ control of tripped and untripped vehicle rollover

NASA Astrophysics Data System (ADS)

Jin, Zhilin; Zhang, Lei; Zhang, Jiale; Khajepour, Amir

2016-10-01

Vehicle rollover is a serious traffic accident. In order to accurately evaluate the possibility of untripped and some special tripped vehicle rollovers, and to prevent vehicle rollover under unpredictable variations of parameters and harsh driving conditions, a new rollover index and an anti-roll control strategy are proposed in this paper. Taking deflections of steering and suspension induced by the roll at the axles into consideration, a six degrees of freedom dynamic model is established, including lateral, yaw, roll, and vertical motions of sprung and unsprung masses. From the vehicle dynamics theory, a new rollover index is developed to predict vehicle rollover risk under both untripped and special tripped situations. This new rollover index is validated by Carsim simulations. In addition, an H-infinity controller with electro hydraulic brake system is optimised by genetic algorithm to improve the anti-rollover performance of the vehicle. The stability and robustness of the active rollover prevention control system are analysed by some numerical simulations. The results show that the control system can improve the critical speed of vehicle rollover obviously, and has a good robustness for variations in the number of passengers and longitude position of the centre of gravity.

Target Engageability Improvement Through Adaptive Data Fusion and Sensor Management: An Approach Based on the Fire Control Radar Search to Lock-On Time

DTIC Science & Technology

2008-05-01

ch based on the fire control radar search to l o ck - o n t i m e F. Rhéaume A. Benaskeur DRDC Valcartier Defence R& D Canada...recherche visant à développer et démontrer des concepts avancés de fusion de données adaptative et de gestion de res- sources. Les systèmes C2 navals...militaires sont en grande partie appuyés par des techno- logies de fusion de données et de gestion de ressources. Le C2 naval militaire doit

Mid-to-long term mortality following surgical versus percutaneous coronary revascularization stratified according to stent subtype: An analysis of 6,682 patients with multivessel disease

PubMed Central

Raja, Shahzad G.; Ilsley, Charles; De Robertis, Fabio; Lane, Rebecca; Kabir, Tito; Bahrami, Toufan; Simon, Andre; Popov, Aron; Dalby, Miles C.; Mason, Mark; Grocott-Mason, Richard; Smith, Robert D.

2018-01-01

Background Studies comparing coronary artery bypass graft (CABG) and percutaneous coronary intervention (PCI) have largely been performed in the bare-metal stent (BMS) and first-generation drug eluting stent (F-DES) era. Second-generation DES (S-DES) have shown improved outcomes when compared to F-DES, but data comparing CABG with PCI using S-DES is limited. We compared mortality following CABG versus PCI for patients with multivessel disease and analyzed different stent types. Methods A total of 6,682 patients underwent multivessel revascularization at Harefield Hospital, UK. We stratified CABG patients into single arterial graft (SAG) or multiple arterial grafts (MAG); and PCI patients into BMS, F-DES or S-DES groups. We analyzed all-cause mortality at 5 years. Results 4,388 patients had CABG (n[SAG] = 3,358; n[MAG] = 1,030) and 2,294 patients had PCI (n[BMS] = 416; n[F-DES] = 752; n[S-DES] = 1,126). PCI had higher 5-year mortality with BMS (HR = 2.27, 95% CI:1.70–3.05, p<0.001); F-DES (HR = 1.52, 95% CI:1.14–2.01, p = 0.003); and S-DES (HR = 1.84, 95% CI:1.42–2.38, p<0.001). This was confirmed in inverse probability treatment weighted analyses. When adjusting for both measured and unmeasured factors using instrumental variable analyses, PCI had higher 5-year mortality with BMS (Δ = 15.5, 95% CI:3.6,27.5, p = 0.011) and FDES (Δ = 16.5, 95% CI:6.6,26.4, p<0.001), but had comparable mortality with CABG for PCI with SDES (Δ = 0.9, 95% CI: -9.6,7.9, p = 0.844), and when exclusively compared to CABG patients with SAG (Δ = 0.4, 95% CI: -8.0,8.7, p = 0.931) or MAG (Δ = 4.6, 95% CI: -0.4,9.6, p = 0.931). Conclusions In this real-world analysis, when adjusting for measured and unmeasured confounding, PCI with SDES had comparable 5-year mortality when compared to CABG. This warrants evaluation in adequately-powered randomized controlled trials. PMID:29408926

Design and experimental validation of linear and nonlinear vehicle steering control strategies

NASA Astrophysics Data System (ADS)

Menhour, Lghani; Lechner, Daniel; Charara, Ali

2012-06-01

This paper proposes the design of three control laws dedicated to vehicle steering control, two based on robust linear control strategies and one based on nonlinear control strategies, and presents a comparison between them. The two robust linear control laws (indirect and direct methods) are built around M linear bicycle models, each of these control laws is composed of two M proportional integral derivative (PID) controllers: one M PID controller to control the lateral deviation and the other M PID controller to control the vehicle yaw angle. The indirect control law method is designed using an oscillation method and a nonlinear optimisation subject to H ∞ constraint. The direct control law method is designed using a linear matrix inequality optimisation in order to achieve H ∞ performances. The nonlinear control method used for the correction of the lateral deviation is based on a continuous first-order sliding-mode controller. The different methods are designed using a linear bicycle vehicle model with variant parameters, but the aim is to simulate the nonlinear vehicle behaviour under high dynamic demands with a four-wheel vehicle model. These steering vehicle controls are validated experimentally using the data acquired using a laboratory vehicle, Peugeot 307, developed by National Institute for Transport and Safety Research - Department of Accident Mechanism Analysis Laboratory's (INRETS-MA) and their performance results are compared. Moreover, an unknown input sliding-mode observer is introduced to estimate the road bank angle.

Optimisation of immunofluorescence methods to determine MCT1 and MCT4 expression in circulating tumour cells.

PubMed

Kershaw, Stephen; Cummings, Jeffrey; Morris, Karen; Tugwood, Jonathan; Dive, Caroline

2015-05-10

The monocarboxylate transporter-1 (MCT1) represents a novel target in rational anticancer drug design while AZD3965 was developed as an inhibitor of this transporter and is undergoing Phase I clinical trials ( http://www.clinicaltrials.gov/show/NCT01791595 ). We describe the optimisation of an immunofluorescence (IF) method for determination of MCT1 and MCT4 in circulating tumour cells (CTC) as potential prognostic and predictive biomarkers of AZD3965 in cancer patients. Antibody selectivity was investigated by western blotting (WB) in K562 and MDAMB231 cell lines acting as positive controls for MCT1 and MCT4 respectively and by flow cytometry also employing the control cell lines. Ability to detect MCT1 and MCT4 in CTC as a 4(th) channel marker utilising the Veridex™ CellSearch system was conducted in both human volunteer blood spiked with control cells and in samples collected from small cell lung cancer (SCLC) patients. Experimental conditions were established which yielded a 10-fold dynamic range (DR) for detection of MCT1 over MCT4 (antibody concentration 6.25 μg/mL; integration time 0.4 seconds) and a 5-fold DR of MCT4 over MCT 1 (8 μg/100 μL and 0.8 seconds). The IF method was sufficiently sensitive to detect both MCT1 and MCT4 in CTCs harvested from cancer patients. The first IF method has been developed and optimised for detection of MCT 1 and MCT4 in cancer patient CTC.

Focal psychodynamic therapy, cognitive behaviour therapy, and optimised treatment as usual in outpatients with anorexia nervosa (ANTOP study): randomised controlled trial.

PubMed

Zipfel, Stephan; Wild, Beate; Groß, Gaby; Friederich, Hans-Christoph; Teufel, Martin; Schellberg, Dieter; Giel, Katrin E; de Zwaan, Martina; Dinkel, Andreas; Herpertz, Stephan; Burgmer, Markus; Löwe, Bernd; Tagay, Sefik; von Wietersheim, Jörn; Zeeck, Almut; Schade-Brittinger, Carmen; Schauenburg, Henning; Herzog, Wolfgang

2014-01-11

Psychotherapy is the treatment of choice for patients with anorexia nervosa, although evidence of efficacy is weak. The Anorexia Nervosa Treatment of OutPatients (ANTOP) study aimed to assess the efficacy and safety of two manual-based outpatient treatments for anorexia nervosa--focal psychodynamic therapy and enhanced cognitive behaviour therapy--versus optimised treatment as usual. The ANTOP study is a multicentre, randomised controlled efficacy trial in adults with anorexia nervosa. We recruited patients from ten university hospitals in Germany. Participants were randomly allocated to 10 months of treatment with either focal psychodynamic therapy, enhanced cognitive behaviour therapy, or optimised treatment as usual (including outpatient psychotherapy and structured care from a family doctor). The primary outcome was weight gain, measured as increased body-mass index (BMI) at the end of treatment. A key secondary outcome was rate of recovery (based on a combination of weight gain and eating disorder-specific psychopathology). Analysis was by intention to treat. This trial is registered at http://isrctn.org, number ISRCTN72809357. Of 727 adults screened for inclusion, 242 underwent randomisation: 80 to focal psychodynamic therapy, 80 to enhanced cognitive behaviour therapy, and 82 to optimised treatment as usual. At the end of treatment, 54 patients (22%) were lost to follow-up, and at 12-month follow-up a total of 73 (30%) had dropped out. At the end of treatment, BMI had increased in all study groups (focal psychodynamic therapy 0·73 kg/m(2), enhanced cognitive behaviour therapy 0·93 kg/m(2), optimised treatment as usual 0·69 kg/m(2)); no differences were noted between groups (mean difference between focal psychodynamic therapy and enhanced cognitive behaviour therapy -0·45, 95% CI -0·96 to 0·07; focal psychodynamic therapy vs optimised treatment as usual -0·14, -0·68 to 0·39; enhanced cognitive behaviour therapy vs optimised treatment as usual -0·30, -0·22 to 0·83). At 12-month follow-up, the mean gain in BMI had risen further (1·64 kg/m(2), 1·30 kg/m(2), and 1·22 kg/m(2), respectively), but no differences between groups were recorded (0·10, -0·56 to 0·76; 0·25, -0·45 to 0·95; 0·15, -0·54 to 0·83, respectively). No serious adverse events attributable to weight loss or trial participation were recorded. Optimised treatment as usual, combining psychotherapy and structured care from a family doctor, should be regarded as solid baseline treatment for adult outpatients with anorexia nervosa. Focal psychodynamic therapy proved advantageous in terms of recovery at 12-month follow-up, and enhanced cognitive behaviour therapy was more effective with respect to speed of weight gain and improvements in eating disorder psychopathology. Long-term outcome data will be helpful to further adapt and improve these novel manual-based treatment approaches. German Federal Ministry of Education and Research (Bundesministerium für Bildung und Forschung, BMBF), German Eating Disorders Diagnostic and Treatment Network (EDNET). Copyright © 2014 Elsevier Ltd. All rights reserved.

An equipment for Rayleigh scattering of Mössbauer radiation

NASA Astrophysics Data System (ADS)

Enescu, S. E.; Bibicu, I.; Zoran, V.; Kluger, A.; Stoica, A. D.; Tripadus, V.

1998-07-01

A personal computer driven equipment designed for Rayleigh scattering of Mössbauer radiation experiments at room temperature is described. The performances of the system were tested using like scatterers crystals with different mosaic divergences: lithium fluoride (LiF) and pyrolytic graphite (C). The equipment, suitable for any kind of Mössbauer scattering experiments, permits low and adjustable horizontal divergences of the incident beam. On décrit un équipement dédié aux mesures de diffusion Rayleigh de la radiation Mössbauer controlée par ordinateur. Les performances du système ont été testées sur des cristaux ayant des divergences de mosaïque différentes: le fluorure de lithium (LiF) et le graphite pyrolytique (C). L'équipement, qui peut être utilisé dans des différents types d'expérimentations basées sur la diffusion de la radiation Mössbauer, admet des divergences horizontales du faisceau incident faibles et réglables.

Couches minces supraconductrices à haute température critique pour l'électronique

NASA Astrophysics Data System (ADS)

Guilloux-Viry, M.; Perrin, A.

1998-08-01

High critical temperature superconductors (HTCS) are very promising for applications in microelectronics due to the control of high quality epitaxial thin films, in spite of a number of specific constraints. Active and passive devices are already available in various laboratories, prooving that applications are actually expected soon. We report here on the interest of HTCS thin films, on preparation processes including materials and substrates choice, and also on characterization methods which are required in order to chek the quality of the samples. Finally some illustrative examples of applications are presented. Les supraconducteurs à haute température critique ouvrent des perspectives prometteuses dans le domaine de l'électronique en raison de la maîtrise de la croissance de films minces de haute qualité cristalline et physique, malgré des difficultés spécifiques. Des dispositifs, aussi bien actifs que passifs, commencent à être réalisés dans divers laboratoires, montrant que des applications peuvent être effectivement envisagées à relativement court terme.

Effect of desipramine on spontaneous activity of hippocampal CA1 neuron after transient cerebral ischemia in rats.

PubMed

Zhu, Z T; Zhang, X X; Liu, J; Jin, G Z

1996-01-01

To study the spontaneous firing of CA1 neurons in rat hippocampus after transient cerebral ischemia and the effect of desipramine (Des) on the post-ischemic electric activity of CA1 neurons. Single-unit extracellular recordings were performed in rats on d 3 after 10 min of cerebral ischemia by occlusion of 4 arteries. Des and saline were injected into a tail vein. The histological changes of CA1 neurons was assessed by the neuronal density of the CA1 sector. The spontaneous firing rate of CA1 neurons on d 3 after ischemia was enhanced in comparison with the control value. Des (0.2 and 0.4 mg.kg-1, i.v., n = 5 & 6, respectively) reduced dose-dependently the increase of firing rate with maximal inhibition by 6 min (58% & 85%) to 9 min (69% & 94%) (vs vehicle group, P < 0.01). About 50% cells in CA1 region showed necrotic changes. Des antagonized the hyperexcitability of CA1 neurons after cerebral ischemia.

Multidisciplinary design optimisation of a recurve bow based on applications of the autogenetic design theory and distributed computing

NASA Astrophysics Data System (ADS)

Fritzsche, Matthias; Kittel, Konstantin; Blankenburg, Alexander; Vajna, Sándor

2012-08-01

The focus of this paper is to present a method of multidisciplinary design optimisation based on the autogenetic design theory (ADT) that provides methods, which are partially implemented in the optimisation software described here. The main thesis of the ADT is that biological evolution and the process of developing products are mainly similar, i.e. procedures from biological evolution can be transferred into product development. In order to fulfil requirements and boundary conditions of any kind (that may change at any time), both biological evolution and product development look for appropriate solution possibilities in a certain area, and try to optimise those that are actually promising by varying parameters and combinations of these solutions. As the time necessary for multidisciplinary design optimisations is a critical aspect in product development, ways to distribute the optimisation process with the effective use of unused calculating capacity, can reduce the optimisation time drastically. Finally, a practical example shows how ADT methods and distributed optimising are applied to improve a product.

Total knee replacement plus physical and medical therapy or treatment with physical and medical therapy alone: a randomised controlled trial in patients with knee osteoarthritis (the MEDIC-study).

PubMed

Skou, Soren T; Roos, Ewa M; Laursen, Mogens B; Rathleff, Michael S; Arendt-Nielsen, Lars; Simonsen, Ole H; Rasmussen, Sten

2012-05-09

There is a lack of high quality evidence concerning the efficacy of total knee arthroplasty (TKA). According to international evidence-based guidelines, treatment of knee osteoarthritis (KOA) should include patient education, exercise and weight loss. Insoles and pharmacological treatment can be included as supplementary treatments. If the combination of these non-surgical treatment modalities is ineffective, TKA may be indicated. The purpose of this randomised controlled trial is to examine whether TKA provides further improvement in pain, function and quality of life in addition to optimised non-surgical treatment in patients with KOA defined as definite radiographic OA and up to moderate pain. The study will be conducted in The North Denmark Region. 100 participants with radiographic KOA (K-L grade ≥2) and mean pain during the previous week of ≤ 60 mm (0-100, best to worst scale) who are considered eligible for TKA by an orthopaedic surgeon will be included. The treatment will consist of 12 weeks of optimised non-surgical treatment consisting of patient education, exercise, diet, insoles, analgesics and/or NSAIDs. Patients will be randomised to either receiving or not receiving a TKA in addition to the optimised non-surgical treatment. The primary outcome will be the change from baseline to 12 months on the Knee Injury and Osteoarthritis Outcome Score (KOOS)(4) defined as the average score for the subscale scores for pain, symptoms, activities of daily living, and quality of life. Secondary outcomes include the five individual KOOS subscale scores, EQ-5D, pain on a 100 mm Visual Analogue Scale, self-efficacy, pain pressure thresholds, and isometric knee flexion and knee extension strength. This is the first randomised controlled trial to investigate the efficacy of TKA as an adjunct treatment to optimised non-surgical treatment in patients with KOA. The results will significantly contribute to evidence-based recommendations for the treatment of patients with KOA. Clinicaltrials.gov reference: NCT01410409.

Total knee replacement plus physical and medical therapy or treatment with physical and medical therapy alone: a randomised controlled trial in patients with knee osteoarthritis (the MEDIC-study)

PubMed Central

2012-01-01

Background There is a lack of high quality evidence concerning the efficacy of total knee arthroplasty (TKA). According to international evidence-based guidelines, treatment of knee osteoarthritis (KOA) should include patient education, exercise and weight loss. Insoles and pharmacological treatment can be included as supplementary treatments. If the combination of these non-surgical treatment modalities is ineffective, TKA may be indicated. The purpose of this randomised controlled trial is to examine whether TKA provides further improvement in pain, function and quality of life in addition to optimised non-surgical treatment in patients with KOA defined as definite radiographic OA and up to moderate pain. Methods/Design The study will be conducted in The North Denmark Region. 100 participants with radiographic KOA (K-L grade ≥2) and mean pain during the previous week of ≤ 60 mm (0–100, best to worst scale) who are considered eligible for TKA by an orthopaedic surgeon will be included. The treatment will consist of 12 weeks of optimised non-surgical treatment consisting of patient education, exercise, diet, insoles, analgesics and/or NSAIDs. Patients will be randomised to either receiving or not receiving a TKA in addition to the optimised non-surgical treatment. The primary outcome will be the change from baseline to 12 months on the Knee Injury and Osteoarthritis Outcome Score (KOOS)4 defined as the average score for the subscale scores for pain, symptoms, activities of daily living, and quality of life. Secondary outcomes include the five individual KOOS subscale scores, EQ-5D, pain on a 100 mm Visual Analogue Scale, self-efficacy, pain pressure thresholds, and isometric knee flexion and knee extension strength. Discussion This is the first randomised controlled trial to investigate the efficacy of TKA as an adjunct treatment to optimised non-surgical treatment in patients with KOA. The results will significantly contribute to evidence-based recommendations for the treatment of patients with KOA. Trial registration Clinicaltrials.gov reference: NCT01410409 PMID:22571284

Instrumentation optique pour l'identification per-operatoire des tissus durant les chirurgies de la thyroide

NASA Astrophysics Data System (ADS)

De Montigny, Etienne

Cette these traite du developpement d'instrumentation pour l'imagerie medicale optique. Ces travaux sont centres sur une application particuliere ; faciliter l'identification des tissus durant les chirurgies de la thyroide et de la parathyroide. La thyroide est une glande situee dans le cou, attachee au larynx a la hauteur de la pomme d'Adam. Elle est entouree de plusieurs structures importantes : muscles, nerfs et glandes parathyroides. Ces dernieres controlent la calcemie et jouent donc un role essentiel dans le corps. Elles sont toutefois de petite taille et sont tres difficiles a distinguer du gras et des ganglions environnants. L'objectif principal de cette these est de developper une instrumentation basee sur la microscopie optique pour permettre l'identification des tissus : thyroide, parathyroide, gras et ganglions, durant les chirurgies. Les choix sont donc faits en fonction de cette application et du contexte specifique des mesures intra-operatoires sur des patients humains. Plusieurs modalites d'imagerie optique sont identifiees pour atteindre l'objectif : microscopie confocale en reflectance, tomographique par coherence optique, et mesure de l'autofluorescence des glandes parathyroides. Dans le but d'ameliorer leur compatibilite avec l'environnement clinique qui requiert stabilite dans le temps et resistance aux vibrations et aux conditions environnementales, ce projet se concentre sur les implementations miniaturisables et basees sur des fibres optiques. Pour implementer un systeme d'imagerie en fluorescence a balayage laser rapide, un systeme d'imagerie en fluorescence par encodage spectral est propose. Bien que l'utilisation de l'encodage spectral semble a priori incompatible avec le contraste en fluorescence, une implementation facile a realiser est proposee. Une seconde version du montage, compatible avec la clinique et facilitant le developpement d'un endoscope, est presentee. La preuve de principe de cette methode est faite a 1300nm, une longueur d'onde qui n'est pas appropriee pour la fluorescence intrinseque des parathyroides. Pour adresser cette lacune, une nouvelle source laser a balayage centree a 780nm a haute puissance (100mW) est montree. Ces developpements sont compatibles avec l'implementation de la microscopie confocale en reflectance identifiee pour l'identification des tissus durant les chirurgies de la thyroide. Cela permet de developper un montage combinant le contraste en reflectance et en fluorescence dans le meme instrument. La microscopie confocale en reflectance possede une tres grande resolution permettant l'examen au niveau cellulaire des tissus. Cette technique souffre toutefois d'un faible rapport signal sur bruit et d'un bruit de tavelure important, reduisant l'interpretabilite des images.

Optimisation of X-ray emission from a laser plasma source for the realisation of microbeam in sub-keV region.

PubMed

Di Paolo Emilio, M; Festuccia, R; Palladino, L

2015-09-01

In this work, the X-ray emission generated from a plasma produced by focusing Nd-YAG laser beam on the Mylar and Yttrium targets will be characterised. The goal is to reach the best condition that optimises the X-ray conversion efficiency at 500 eV (pre-edge of the Oxigen K-shell), strongly absorbed by carbon-based structures. The characteristics of the microbeam optical system, the software/hardware control and the preliminary measurements of the X-ray fluence will be presented. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Effect of Combination Therapy with Neuroprotective and Vasoprotective Agents on Cerebral Ischemia.

PubMed

Yang, Jiping; Yang, Bei; Xiu, Baoxin; Qi, Jinchong; Liu, Huaijun

2018-05-01

Because most tested drugs are active against only one of the damaging processes associated with stroke, other mechanisms may cause cellular death. Thus, a combination of protective agents targeting different pathophysiological mechanisms may obtain better effects than a single agent. The major objective of this study was to investigate the effect of combination therapy with vascular endothelial growth factor (VEGF) and nerve growth factor (NGF) after controlled ischemic brain injury in rabbits. Animals were randomly assigned to one of the following groups: sham group, saline-treated control group or NGF+VEGF-treated group. Animals received an intracerebral microinjection of VEGF and NGF or saline at 5 or 8 hours after ischemia. The two specified time points of administration were greater than or equal to the existing therapeutic time window for monoterapy with VEGF or NGF alone (3 or 5 hours of ischemia). Infarct volume, water content, neurological deficits, neural cell apoptosis and the expression of caspase-3 and Bcl-2 were measured. Compared with saline-treated controls, the combination therapy of VEGF and NGF significantly reduced infarct volume, water content, neural cell apoptosis and the expression of caspase-3, up-regulated the expression of Bcl-2 and improved functional recovery (both p<0.01) when administered 5 or 8 hours after ischemia. The earlier the administration the better the neuroprotection. These results showed that the combination therapy with VEGF and NGF provided neuroprotective effects. In addition, the time window of combination treatment should be at least 8 hours after ischemia, which was wider than monotherapy. RÉSUMÉ: Les effets d'une polythérapie combinant agents neuro-protecteurs et agents vasoprotecteurs dans les cas d'ischémie cérébrale. Contexte:Étant donné que la plupart des médicaments préalablement testés tendent à n'agir contre seulement un des processus de dommage associés aux AVC, il est possible que d'autres processus entraînent une mort cellulaire. À cet effet, il se pourrait qu'une combinaison d'agents protecteurs ciblant divers mécanismes physiopathologiques permette d'obtenir de meilleurs résultats qu'un simple agent. Après avoir suscité de façon contrôlée des lésions cérébrales ischémiques chez des lapins, l'objectif principal de la présente étude a donc été de se pencher sur l'impact d'une polythérapie combinant la protéine dite « facteur de croissance de l'endothélium vasculaire » (ou « VEGF » en anglais) avec le « facteur de croissance des nerfs » (ou « NGF » en anglais). Méthodes: Les animaux ont été attribués au hasard à l'un des groupes suivants : ceux ayant reçu un traitement fictif ; ceux, du groupe témoin, ayant bénéficié d'un traitement à base de solution saline ; et finalement ceux ayant été traités au moyen des VEGF et NGF. À noter que les lapins ont reçu une micro-injection intracérébrale de VEGF et de NGF ou de solution saline 5 heures ou 8 heures à la suite de leur AVC. Ces deux délais d'administration des VEGF et NGF sont équivalents ou supérieurs aux délais actuels d'administration des VEGF ou NGF à titre de monothérapie (3 heures ou 5 heures à la suite d'un AVC). Tant le volume des infarctus, le contenu en eau, les déficits neurologiques ainsi causés, l'apoptose des neurones que l'expression des protéases caspase 3 et des protéines Bcl-2 ont été mesurés. Résultats: Si on la compare au traitement à base de solution saline administré au groupe témoin, la polythérapie à base de VEGF et de NGF, lorsqu'administrée 5 heures ou 8 heures à la suite de l'AVC, a su réduire de façon notable le volume des infarctus, le contenu en eau, l'apoptose des neurones et l'expression des protéases caspase 3. Elle a également permis de réguler à la hausse l'expression des protéines Bcl-2 en plus d'entraîner une amélioration de la récupération fonctionnelle (p < 0,01 pour ces deux aspects). Ainsi donc, plus tôt l'on opte pour cette polythérapie, meilleure sera la neuroprotection encourue. Ces résultats démontrent que la polythérapie à base de VEGF et de NGF procure des effets neuroprotecteurs. Quant au délai d'administration de ce traitement combinatoire, il devrait être d'au moins 8 heures à la suite d'un AVC, ce qui est plus élevé que la monothérapie.

Élaboration et performances de matériaux supraconducteurs {YBa_2Cu_3O_7} massifs texturés de taille croissante

NASA Astrophysics Data System (ADS)

Chaud, X.; Gautier-Picard, P.; Beaugnon, E.; Porcar, L.; Bourgault, D.; Tournier, R.; Erraud, A.; Tixador, P.

1998-03-01

Industrial applications of the bulk superconducting YBa_2Cu_3O_7 material imply to control the growth of large oriented monodomains in samples of big size (several centimeters). The laboratory EPM-Matformag is committed to produce such materials according to three different methods (zone melting, solidification controlled by a magnetic field, crystal growth from a seed). The results obtained show that it is possible by such methods to elaborate a material with high performances at the centimeter scale and to produce it in series. The availability of such materials allows the measure of physical properties on a large scale and the testing of prototypes for cryo-electrotechnical applications (magnetic bearing, flywheel, coupling device, current lead...). Les applications industrielles des matériaux supraconducteurs massifs YBa_2Cu_3O_7 impliquent de contrôler la croissance de larges monodomaines orientés dans des échantillons de grande taille (plusieurs centimètres). Le laboratoire EPM-Matformag s'est appliqué à produire de tels matériaux selon trois techniques différentes (fusion de zone, solidification contrôlée sous champ magnétique, croissance cristalline à partir d'un germe). Les résultats obtenus montrent qu'il est possible par de telles techniques d'obtenir un matériau performant à l'échelle des centimètres et de le produire en série. La disponibilité de tels matériaux permet de mesurer des propriétés physiques à grande échelle et de tester des prototypes d'applications cryo-électrotechniques (palier magnétique, volant d'inertie, coupleur, amenée de courant, limiteur de courant...).

Optimisation in radiotherapy. III: Stochastic optimisation algorithms and conclusions.

PubMed

Ebert, M

1997-12-01

This is the final article in a three part examination of optimisation in radiotherapy. Previous articles have established the bases and form of the radiotherapy optimisation problem, and examined certain types of optimisation algorithm, namely, those which perform some form of ordered search of the solution space (mathematical programming), and those which attempt to find the closest feasible solution to the inverse planning problem (deterministic inversion). The current paper examines algorithms which search the space of possible irradiation strategies by stochastic methods. The resulting iterative search methods move about the solution space by sampling random variates, which gradually become more constricted as the algorithm converges upon the optimal solution. This paper also discusses the implementation of optimisation in radiotherapy practice.

Optimisation of nutritional requirements for dopamine synthesis by calcium alginate-entrapped mutant strain of Aspergillus oryzae EMS-6.

PubMed

Ali, Sikander; Nawaz, Wajeeha

2017-02-01

The optimisation of nutritional requirements for dopamine (DA) synthesis by calcium alginate-entrapped mutant variant of Aspergillus oryzae EMS-6 using submerged fermentation technique was investigated. A total of 13 strains were isolated from soil. Isolate I-2 was selected as a better producer of DA and improved by exposing with ethyl methylsulphonate (EMS). EMS-6 was selected as it exhibited 43 μg/mL DA activity. The mutant variable was further treated with low levels of l-cysteine HCl to make it resistant against diversion and environmental stress. The conidiospores of mutant variant were entrapped in calcium alginate beads for stable product formation. EMS-6 gave maximum DA activity (124 μg/mL) when supplemented with 0.1% peptone and 0.2% sucrose, under optimised parameters viz. pH 3, temperature of 55 °C and incubation time of 70 min. The study involves the high profile of DA activity and is needed, as DA is capable to control numerous neurogenic disorders.

Optimisation of follow-up after metabolic surgery.

PubMed

Mingrone, Geltrude; Bornstein, Stefan; Le Roux, Carel W

2018-06-01

Bariatric surgery has many benefits beyond weight loss, including improved control of glycaemia, blood pressure, and dyslipidaemia; hence, such surgery has been rebranded as metabolic surgery. The operations are, unfortunately, also associated with major surgical and medical complications. The medical complications include gastro-oesophageal reflux disease, malnutrition, and metabolic complications deriving from vitamin and mineral malabsorption. The benefits of surgery can be optimised by implementing specific protocols before and after surgery. In this Review, we discuss the assessment of the risk of major cardiac complications and severe obstructive sleep apnoea before surgery, and the provision of adequate lifelong postsurgery nutritional, vitamin, and mineral supplementation to reduce complications. Additionally, we examine the best antidiabetic medications to reduce the risk of hypoglycaemia after gastric bypass and sleeve gastrectomy, and the strategies to improve weight loss or reduce weight regain. Although optimising clinical pathways is possible to maximise metabolic benefits and reduce the risks of complications and micronutrient deficiencies, evolution of these strategies can further improve the risk-to-benefit ratio of metabolic surgery. Copyright © 2018 Elsevier Ltd. All rights reserved.

Methodologie de conception numerique d'un ventilateur helico-centrifuge basee sur l'emploi du calcul meridien

NASA Astrophysics Data System (ADS)

Lallier-Daniels, Dominic

La conception de ventilateurs est souvent basée sur une méthodologie « essais/erreurs » d'amélioration de géométries existantes ainsi que sur l'expérience de design et les résultats expérimentaux cumulés par les entreprises. Cependant, cette méthodologie peut se révéler coûteuse en cas d'échec; même en cas de succès, des améliorations significatives en performance sont souvent difficiles, voire impossibles à obtenir. Le projet présent propose le développement et la validation d'une méthodologie de conception basée sur l'emploi du calcul méridien pour la conception préliminaire de turbomachines hélico-centrifuges (ou flux-mixte) et l'utilisation du calcul numérique d'écoulement fluides (CFD) pour la conception détaillée. La méthode de calcul méridien à la base du processus de conception proposé est d'abord présentée. Dans un premier temps, le cadre théorique est développé. Le calcul méridien demeurant fondamentalement un processus itératif, le processus de calcul est également présenté, incluant les méthodes numériques de calcul employée pour la résolution des équations fondamentales. Une validation du code méridien écrit dans le cadre du projet de maîtrise face à un algorithme de calcul méridien développé par l'auteur de la méthode ainsi qu'à des résultats de simulation numérique sur un code commercial est également réalisée. La méthodologie de conception de turbomachines développée dans le cadre de l'étude est ensuite présentée sous la forme d'une étude de cas pour un ventilateur hélico-centrifuge basé sur des spécifications fournies par le partenaire industriel Venmar. La méthodologie se divise en trois étapes: le calcul méridien est employé pour le pré-dimensionnement, suivi de simulations 2D de grilles d'aubes pour la conception détaillée des pales et finalement d'une analyse numérique 3D pour la validation et l'optimisation fine de la géométrie. Les résultats de calcul méridien sont en outre comparés aux résultats de simulation pour la géométrie 3D afin de valider l'emploi du calcul méridien comme outil de prédimensionnement. Mots-clés Turbomachines hélico-centrifuges, Calcul méridien, Simulation numérique d'écoulement fluide, Conception numérique de turbomachines.

Modélisation à long terme et optimisation du stock d'énergie des installations solaires autonomes

NASA Astrophysics Data System (ADS)

Maafi, A.; Delorme, C.

1996-04-01

A sizing approach of storage capacity for autonomous solar system has been developed by analyzing the difference between solar radiation input and energy demand on long-term periods. This approach has been implemented using series of daily global irradiation data recorded or generated on a horizontal surface in the meteorological stations of Abidjan (Ivory Coast), Algiers and Tamanrasset (Algeria) and Carpentras (France). The obtained results show that for an energy demand equaling the pluriannual mean of solar irradiation a storage of several months is needed to obtain the autonomy of solar systems located in Algiers, Carpentras and Tamanrasset. It should be too expensive investment to set-up such solar systems in these locations. Therefore, the size of the storage is minimized by using a non-zero initial energy storage and reducing the energy demand. This procedure show that it is possible to provide every day a programmed energy using autonomous solar systems which are competitive economically. Une approche de dimensionnement de la capacité de stockage des installations solaires autonomes a été développé. Elle est basée sur l'analyse de la différence entre l'énergie incidente et la consommation requise. Cette méthode a été mise au point à partir de données journalières d'irradiation globale enregistrées ou reconstituées sur plan horizontal dans les stations météorologiques d'Abidjan (Côte d'Ivoire), d'Alger et de Tamanrasset (Algérie) et de Carpentras (France). Pour une demande énergétique correspondant à la production moyenne pluriannuelle d'énergie solaire, les résultats montrent qu'un stockage de plusieurs mois est requis pour garantir l'autonomie de fonctionnement des installations solaires implantées à Alger, Carpentras et Tamanrasset. L'autonomie ainsi obtenue n'est pas économiquement rentable. Aussi, la taille du stockage a été minimisée en utilisant un stock initial d'énergie au démarrage de l'installation et en réduisant la consommation. Ceci a permis de montrer que la couverture de besoins énergétiques planifiés à l'aide d'installations solaires autonomes, compétitives sur le plan économique, est possible.

Pertinence et limitations de la loi de Mott dans les isolants désordonnés

NASA Astrophysics Data System (ADS)

Ladieu, François; Sanquer, Marc

Twenty five years ago, Mott's law was established in order to describe electrical transport in disordered insulators at low temperature. In this review, we briefly summarize the different theoretical steps involved in the rigourous derivation of Mott's law. We stress upon the fact that Mott's law gives the mean conductance of an ensemble of macroscopic samples as long as electron-electron interactions remain negligible. We then study what happens when at least one of the key assumptions of Mott's law no longer holds. We first focus on systems whose size — at least in one dimension — is not macroscopic: the optimization involved in Mott's law is no longer relevant for the measured conductance. Eventually, we try to gather different works dealing with electron-electron interactions. It is now established that interactions generally produce a stronger divergence for the electrical resistance than the one predicted by Mott's law at the lowest temperatures. But the exact shape of this divergence, as well as its interpretation, remain debated. We try to make a link between Efros and Shklovskii 's work and their famous "Coulomb gap" and a more recent work about granular media. In this latter work, the size of the grains is the key parameter for the shape of the divergence of the resistance at low temperature. We suggest this could indicate a way for a model accounting for the different shapes of divergence of the electrical resistance at the lowest temperatures. Furthermore this framework of granular media allows us to deal with non linear regime: we explain the main differences between the predictions of the hot electrons model and the ones recently derived for a d -dimensional network of grains. Il y a déjà un quart de siècle que la loi de Mott a été établie afin de décrire le transport dans les milieux isolants désordonnés à basse température. Dans cet article de revue, nous rappelons brièvement les diverses étapes théoriques nécessaires à l'établissement rigoureux de la loi de Mott. Nous insistons sur le fait que la loi de Mott ne donne que la conductance moyenne d'un ensemble d'échantillons macroscopiques, tant que les interactions entre électrons restent négligeables. Nous étudions ensuite ce qu'il se passe lorsque l'on lève au moins l'une des hypothèses nécessaires à l'établissement de la loi de Mott. Nous nous penchons d'abord sur le cas des systèmes dont au moins une dimension n'est pas macroscopique : l'optimisation contenue dans la loi de Mott n'est alors plus représentative de la conductance mesurée. Enfin, nous essayons de rassembler des travaux relatifs aux effets des interactions entre électrons. S'il est acquis que, de façon générale, les interactions entraînent une divergence de la résistance plus rapide que ne le prédit la loi de Mott aux plus basses températures, la forme exacte de cette divergence ainsi que son interprétation restent encore sujets à caution. Nous rapprochons le travail d'Efros et Shklovskii et leur célèbre "gap de Coulomb" d'un travail plus récent sur les milieux granulaires dans lequel la taille des grains joue un rôle discriminant sur la nature de la divergence de la résistance à basse température. Nous suggérons que ce rapprochement ouvre une piste pour un modèle rendant compte de manière unifiée des diverses divergences mesurées à basse température pour la résistance électrique. Cette incursion dans les modèles granulaires nous permet aussi d'aborder la question des non linéarités en exposant les différences entre les prédictions du modèle des électrons chauds et celles proposées récemment pour un réseau de grains en dimension d .

DES-ncRNA: A knowledgebase for exploring information about human micro and long noncoding RNAs based on literature-mining.

PubMed

Salhi, Adil; Essack, Magbubah; Alam, Tanvir; Bajic, Vladan P; Ma, Lina; Radovanovic, Aleksandar; Marchand, Benoit; Schmeier, Sebastian; Zhang, Zhang; Bajic, Vladimir B

2017-07-03

Noncoding RNAs (ncRNAs), particularly microRNAs (miRNAs) and long ncRNAs (lncRNAs), are important players in diseases and emerge as novel drug targets. Thus, unraveling the relationships between ncRNAs and other biomedical entities in cells are critical for better understanding ncRNA roles that may eventually help develop their use in medicine. To support ncRNA research and facilitate retrieval of relevant information regarding miRNAs and lncRNAs from the plethora of published ncRNA-related research, we developed DES-ncRNA ( www.cbrc.kaust.edu.sa/des_ncrna ). DES-ncRNA is a knowledgebase containing text- and data-mined information from public scientific literature and other public resources. Exploration of mined information is enabled through terms and pairs of terms from 19 topic-specific dictionaries including, for example, antibiotics, toxins, drugs, enzymes, mutations, pathways, human genes and proteins, drug indications and side effects, mutations, diseases, etc. DES-ncRNA contains approximately 878,000 associations of terms from these dictionaries of which 36,222 (5,373) are with regards to miRNAs (lncRNAs). We provide several ways to explore information regarding ncRNAs to users including controlled generation of association networks as well as hypotheses generation. We show an example how DES-ncRNA can aid research on Alzheimer disease and suggest potential therapeutic role for Fasudil. DES-ncRNA is a powerful tool that can be used on its own or as a complement to the existing resources, to support research in human ncRNA. To our knowledge, this is the only knowledgebase dedicated to human miRNAs and lncRNAs derived primarily through literature-mining enabling exploration of a broad spectrum of associated biomedical entities, not paralleled by any other resource.

DES-ncRNA: A knowledgebase for exploring information about human micro and long noncoding RNAs based on literature-mining

PubMed Central

Salhi, Adil; Essack, Magbubah; Alam, Tanvir; Bajic, Vladan P.; Ma, Lina; Radovanovic, Aleksandar; Marchand, Benoit; Zhang, Zhang; Bajic, Vladimir B.

2017-01-01

ABSTRACT Noncoding RNAs (ncRNAs), particularly microRNAs (miRNAs) and long ncRNAs (lncRNAs), are important players in diseases and emerge as novel drug targets. Thus, unraveling the relationships between ncRNAs and other biomedical entities in cells are critical for better understanding ncRNA roles that may eventually help develop their use in medicine. To support ncRNA research and facilitate retrieval of relevant information regarding miRNAs and lncRNAs from the plethora of published ncRNA-related research, we developed DES-ncRNA (www.cbrc.kaust.edu.sa/des_ncrna). DES-ncRNA is a knowledgebase containing text- and data-mined information from public scientific literature and other public resources. Exploration of mined information is enabled through terms and pairs of terms from 19 topic-specific dictionaries including, for example, antibiotics, toxins, drugs, enzymes, mutations, pathways, human genes and proteins, drug indications and side effects, mutations, diseases, etc. DES-ncRNA contains approximately 878,000 associations of terms from these dictionaries of which 36,222 (5,373) are with regards to miRNAs (lncRNAs). We provide several ways to explore information regarding ncRNAs to users including controlled generation of association networks as well as hypotheses generation. We show an example how DES-ncRNA can aid research on Alzheimer disease and suggest potential therapeutic role for Fasudil. DES-ncRNA is a powerful tool that can be used on its own or as a complement to the existing resources, to support research in human ncRNA. To our knowledge, this is the only knowledgebase dedicated to human miRNAs and lncRNAs derived primarily through literature-mining enabling exploration of a broad spectrum of associated biomedical entities, not paralleled by any other resource. PMID:28387604

Impact of dry eye syndrome on vision-related quality of life.

PubMed

Miljanović, Biljana; Dana, Reza; Sullivan, David A; Schaumberg, Debra A

2007-03-01

To evaluate the impact of dry eye syndrome (DES) on vision-associated quality of life. Cross-sectional study. We identified 450 participants in the Women's Health Study (WHS) and 240 participants in the Physicians' Health Study (PHS) and sent a supplementary questionnaire asking how much their everyday activities were limited by symptoms of dry eye and to what degree problems with their eyes limited them in reading, driving, working at the computer, their professional activity, and watching television. By design, one-third of study subjects had clinically diagnosed DES or severe symptoms and two-thirds did not. We used logistic regression to examine relationships of DES with reported problems with everyday activities in each cohort and pooled estimates using meta-analysis methods. Of the participants invited, 85% completed the supplementary questionnaire, including 135 WHS and 55 PHS participants with DES, and 250 WHS and 149 PHS participants without DES. Controlling for age, diabetes, hypertension, and other factors, those with DES were more likely to report problems with reading ([odds ratio] OR = 3.64, 95% [confidence interval] CI 2.45 to 5.40, P < .0001); carrying out professional work (OR = 3.49, 95% CI 1.72 to 7.09, P= 0.001); using a computer (OR = 3.37, 95% CI 2.11 to 5.38, P < .0001); watching television (OR = 2.84, 95% CI 1.05 to 7.74, P = .04); driving during the day (OR = 2.80, 95% CI 1.58 to 4.96, P < .0001); and driving at night (OR = 2.20, 95% CI 1.48 to 3.28, P < .0001). DES is associated with a measurable adverse impact on several common and important tasks of daily living, further implicating this condition as an important public health problem deserving increased attention and resources.

Percutaneous coronary intervention with oral sirolimus and bare metal stents has comparable safety and efficacy to treatment with drug eluting stents, but with significant cost saving: long-term follow-up results from the randomised, controlled ORAR III (Oral Rapamycin in ARgentina) study.

PubMed

Rodriguez, Alfredo E; Maree, Andrew; Tarragona, Sonia; Fernandez-Pereira, Carlos; Santaera, Omar; Rodriguez Granillo, Alfredo M; Rodriguez-Granillo, Gaston A; Russo-Felssen, Miguel; Kukreja, Neville; Antoniucci, David; Palacios, Igor F; Serruys, Patrick W

2009-06-01

Previous randomised studies have shown a significant reduction in restenosis when oral rapamycin (OR) is administered to patients undergoing bare metal stent (BMS) implantation. How this regimen compares to drug eluting stents (DES) is unknown. Two-hundred patients with de novo coronary lesions were randomised to treatment with OR plus BMS (100 pts) or with DES (100 pts). OR was given as a bolus of 10 mg per day before PCI followed by daily doses of 3 mg during following 13 days. Primary endpoints were to compare hospital, follow-up and overall cost at one, two, three and five years of follow-up. The secondary endpoints included death, myocardial infarction (MI) and stroke and were analysed as major adverse cardiovascular events (MACCE). Target vessel (TVR) and target lesion revascularisation (TLR) were independently analysed. Costs included procedural resources, hospitalisation, medications, repeat revascularisation procedures and professional fees. Baseline demographic, clinical and angiographic characteristics were similar. At 18.3 +/- 7 months of follow-up, the initial strategy of OR plus BMS resulted in significant cost saving when compared to DES (p=0.0001). TLR rate was 8.2% with DES and 7.0% with OR plus BMS (p=0.84), similarly no differences in TVR rate in both groups was seen (10.6% and 10.5% in OR and DES group respectively, p=0.86). Non-inferiority testing, determined that DES therapy failed to be cost saving compared to OR in all possible cost scenarios. A strategy of OR plus BMS is cost saving compared to DES in patients undergoing PCI for de novo coronary lesions.

Reduction of In-Stent Restenosis by Cholesteryl Ester Transfer Protein Inhibition.

PubMed

Wu, Ben J; Li, Yue; Ong, Kwok L; Sun, Yidan; Shrestha, Sudichhya; Hou, Liming; Johns, Douglas; Barter, Philip J; Rye, Kerry-Anne

2017-12-01

Angioplasty and stent implantation, the most common treatment for atherosclerotic lesions, have a significant failure rate because of restenosis. This study asks whether increasing plasma high-density lipoprotein (HDL) levels by inhibiting cholesteryl ester transfer protein activity with the anacetrapib analog, des-fluoro-anacetrapib, prevents stent-induced neointimal hyperplasia. New Zealand White rabbits received normal chow or chow supplemented with 0.14% (wt/wt) des-fluoro-anacetrapib for 6 weeks. Iliac artery endothelial denudation and bare metal steel stent deployment were performed after 2 weeks of des-fluoro-anacetrapib treatment. The animals were euthanized 4 weeks poststent deployment. Relative to control, dietary supplementation with des-fluoro-anacetrapib reduced plasma cholesteryl ester transfer protein activity and increased plasma apolipoprotein A-I and HDL cholesterol levels by 53±6.3% and 120±19%, respectively. Non-HDL cholesterol levels were unaffected. Des-fluoro-anacetrapib treatment reduced the intimal area of the stented arteries by 43±5.6% ( P <0.001), the media area was unchanged, and the arterial lumen area increased by 12±2.4% ( P <0.05). Des-fluoro-anacetrapib treatment inhibited vascular smooth muscle cell proliferation by 41±4.5% ( P <0.001). Incubation of isolated HDLs from des-fluoro-anacetrapib-treated animals with human aortic smooth muscle cells at apolipoprotein A-I concentrations comparable to their plasma levels inhibited cell proliferation and migration. These effects were dependent on scavenger receptor-B1, the adaptor protein PDZ domain-containing protein 1, and phosphatidylinositol-3-kinase/Akt activation. HDLs from des-fluoro-anacetrapib-treated animals also inhibited proinflammatory cytokine-induced human aortic smooth muscle cell proliferation and stent-induced vascular inflammation. Inhibiting cholesteryl ester transfer protein activity in New Zealand White rabbits with iliac artery balloon injury and stent deployment increases HDL levels, inhibits vascular smooth muscle cell proliferation, and reduces neointimal hyperplasia in an scavenger receptor-B1, PDZ domain-containing protein 1- and phosphatidylinositol-3-kinase/Akt-dependent manner. © 2017 American Heart Association, Inc.

Gastroprotective effect of desmosdumotin C isolated from Mitrella kentii against ethanol-induced gastric mucosal hemorrhage in rats: possible involvement of glutathione, heat-shock protein-70, sulfhydryl compounds, nitric oxide, and anti-Helicobacter pylori activity

PubMed Central

2013-01-01

Background Mitrella kentii (M. kentii) (Bl.) Miq, is a tree-climbing liana that belongs to the family Annonaceae. The plant is rich with isoquinoline alkaloids, terpenylated dihydrochalcones and benzoic acids and has been reported to possess anti-inflammatory activity. The purpose of this study is to assess the gastroprotective effects of desmosdumotin C (DES), a new isolated bioactive compound from M. kentii, on gastric ulcer models in rats. Methods DES was isolated from the bark of M. kentii. Experimental rats were orally pretreated with 5, 10 and 20 mg/kg of the isolated compound and were subsequently subjected to absolute ethanol-induced acute gastric ulcer. Gross evaluation, mucus content, gastric acidity and histological gastric lesions were assessed in vivo. The effects of DES on the anti-oxidant system, non-protein sulfhydryl (NP-SH) content, nitric oxide (NO)level, cyclooxygenase-2 (COX-2) enzyme activity, bcl-2-associated X (Bax) protein expression and Helicabacter pylori (H pylori) were also investigated. Results DES pre-treatment at the administered doses significantly attenuated ethanol-induced gastric ulcer; this was observed by decreased gastric ulcer area, reduced or absence of edema and leucocytes infiltration compared to the ulcer control group. It was found that DES maintained glutathione (GSH) level, decreased malondialdehyde (MDA) level, increased NP-SH content and NO level and inhibited COX-2 activity. The compound up regulated heat shock protein-70 (HSP-70) and down regulated Bax protein expression in the ulcerated tissue. DES showed interesting anti-H pylori effects. The efficacy of DES was accomplished safely without any signs of toxicity. Conclusions The current study reveals that DES demonstrated gastroprotective effects which could be attributed to its antioxidant effect, activation of HSP-70 protein, intervention with COX-2 inflammatory pathway and potent anti H pylori effect. PMID:23866830

Optimisation on processing parameters for minimising warpage on side arm using response surface methodology (RSM) and particle swarm optimisation (PSO)

NASA Astrophysics Data System (ADS)

Rayhana, N.; Fathullah, M.; Shayfull, Z.; Nasir, S. M.; Hazwan, M. H. M.; Sazli, M.; Yahya, Z. R.

2017-09-01

This study presents the application of optimisation method to reduce the warpage of side arm part. Autodesk Moldflow Insight software was integrated into this study to analyse the warpage. The design of Experiment (DOE) for Response Surface Methodology (RSM) was constructed and by using the equation from RSM, Particle Swarm Optimisation (PSO) was applied. The optimisation method will result in optimised processing parameters with minimum warpage. Mould temperature, melt temperature, packing pressure, packing time and cooling time was selected as the variable parameters. Parameters selection was based on most significant factor affecting warpage stated by previous researchers. The results show that warpage was improved by 28.16% for RSM and 28.17% for PSO. The warpage improvement in PSO from RSM is only by 0.01 %. Thus, the optimisation using RSM is already efficient to give the best combination parameters and optimum warpage value for side arm part. The most significant parameters affecting warpage are packing pressure.

Metaheuristic optimisation methods for approximate solving of singular boundary value problems

NASA Astrophysics Data System (ADS)

Sadollah, Ali; Yadav, Neha; Gao, Kaizhou; Su, Rong

2017-07-01

This paper presents a novel approximation technique based on metaheuristics and weighted residual function (WRF) for tackling singular boundary value problems (BVPs) arising in engineering and science. With the aid of certain fundamental concepts of mathematics, Fourier series expansion, and metaheuristic optimisation algorithms, singular BVPs can be approximated as an optimisation problem with boundary conditions as constraints. The target is to minimise the WRF (i.e. error function) constructed in approximation of BVPs. The scheme involves generational distance metric for quality evaluation of the approximate solutions against exact solutions (i.e. error evaluator metric). Four test problems including two linear and two non-linear singular BVPs are considered in this paper to check the efficiency and accuracy of the proposed algorithm. The optimisation task is performed using three different optimisers including the particle swarm optimisation, the water cycle algorithm, and the harmony search algorithm. Optimisation results obtained show that the suggested technique can be successfully applied for approximate solving of singular BVPs.

Optimisation study of a vehicle bumper subsystem with fuzzy parameters

NASA Astrophysics Data System (ADS)

Farkas, L.; Moens, D.; Donders, S.; Vandepitte, D.

2012-10-01

This paper deals with the design and optimisation for crashworthiness of a vehicle bumper subsystem, which is a key scenario for vehicle component design. The automotive manufacturers and suppliers have to find optimal design solutions for such subsystems that comply with the conflicting requirements of the regulatory bodies regarding functional performance (safety and repairability) and regarding the environmental impact (mass). For the bumper design challenge, an integrated methodology for multi-attribute design engineering of mechanical structures is set up. The integrated process captures the various tasks that are usually performed manually, this way facilitating the automated design iterations for optimisation. Subsequently, an optimisation process is applied that takes the effect of parametric uncertainties into account, such that the system level of failure possibility is acceptable. This optimisation process is referred to as possibility-based design optimisation and integrates the fuzzy FE analysis applied for the uncertainty treatment in crash simulations. This process is the counterpart of the reliability-based design optimisation used in a probabilistic context with statistically defined parameters (variabilities).

Effets du stress familial lié au diabète sur le contrôle glycémique chez les jeunes diabétiques de type 1

PubMed Central

Tsiouli, Elina; Alexopoulos, Evangelos C.; Stefanaki, Charikleia; Darviri, Christina; Chrousos, George P.

2013-01-01

Objectif Examiner la façon dont le stress familial influence le contrôle glycémique chez les patients diabétiques de moins de 18 ans. Sources des données Une recherche des études pertinentes publiées depuis 1990 a été réalisée dans PubMed et Scopus à l'aide des mots-clés suivants en anglais: diabetes type 1, glycemic control, family stress, family conflict et family function. Sélection des études La recension initiale a permis de cerner un total de 1 478 articles. La synthèse finale portrait sur 6 études de cohortes, 3 études transversales et 1 étude qualitative dans lesquelles le stress familial était évalué à l'aide d'instruments de mesure des conflits spécifiquement reliés au diabète et le contrôle glycémique était mesuré en fonction de l'hémoglobine glycosylée. Synthèse Dans la plupart des études, il existait une corrélation négative entre le stress familial et le contrôle glycémique des patients. Le bon fonctionnement familial était fortement relié à un bon contrôle glycémique des patients, tandis que les conflits familiaux étaient associés à un mauvais contrôle glycémique. Les familles dont la situation socioéconomique était défavorisée, celles ayant des adolescents atteints de diabète et les familles monoparentales étaient plus enclines à vivre un stress relié au diabète et étaient, par conséquent, plus susceptibles de connaître un moins bon contrôle glycémique. Conclusion Les interventions psychologiques thérapeutiques et les programmes éducatifs peuvent aider à atténuer le stress familial relié au diabète et amélioreront probablement le contrôle glycémique.

Improved head direction command classification using an optimised Bayesian neural network.

PubMed

Nguyen, Son T; Nguyen, Hung T; Taylor, Philip B; Middleton, James

2006-01-01

Assistive technologies have recently emerged to improve the quality of life of severely disabled people by enhancing their independence in daily activities. Since many of those individuals have limited or non-existing control from the neck downward, alternative hands-free input modalities have become very important for these people to access assistive devices. In hands-free control, head movement has been proved to be a very effective user interface as it can provide a comfortable, reliable and natural way to access the device. Recently, neural networks have been shown to be useful not only for real-time pattern recognition but also for creating user-adaptive models. Since multi-layer perceptron neural networks trained using standard back-propagation may cause poor generalisation, the Bayesian technique has been proposed to improve the generalisation and robustness of these networks. This paper describes the use of Bayesian neural networks in developing a hands-free wheelchair control system. The experimental results show that with the optimised architecture, classification Bayesian neural networks can detect head commands of wheelchair users accurately irrespective to their levels of injuries.

Les cooperatives et l'electrification rurale du Quebec, 1945--1964

NASA Astrophysics Data System (ADS)

Dorion, Marie-Josee

Cette these est consacree a l'histoire de l'electrification rurale du Quebec, et, plus particulierement, a l'histoire des cooperatives d'electricite. Fondees par vagues successives a partir de 1945, les cooperatives rurales d'electricite ont ete actives dans plusieurs regions du Quebec et elles ont electrifie une partie significative des zones rurales. Afin de comprendre le contexte de la creation des cooperatives d'electricite, notre these debute (premiere partie) par une analyse du climat sociopolitique des annees precedant la naissance du systeme cooperatif d'electrification rurale. Nous y voyons de quelle facon l'electrification rurale devient progressivement, a partir de la fin des annees 1920, une question d'actualite a laquelle les divers gouvernements qui se succedent tentent de trouver une solution, sans engager---ou si peu---les fonds de l'Etat. En ce sens, la premiere etatisation et la mise sur pied d'Hydro-Quebec, en 1944, marquent une rupture quant au mode d'action privilegie jusque-la. La nouvelle societe d'Etat se voit cependant retirer son mandat d'electrifier le monde rural un an apres sa fondation, car le gouvernement Duplessis, de retour au pouvoir, prefere mettre en place son propre modele d'electrification rurale. Ce systeme repose sur des cooperatives d'electricite, soutenues par un organisme public, l'Office de l'electrification rurale (OER). L'OER suscite de grandes attentes de la part des ruraux et c'est par centaines qu'ils se manifestent. Cet engouement pour les cooperatives complique la tache de l'OER, qui doit superviser de nouvelles societes tout en assurant sa propre organisation. Malgre des hesitations et quelques delais introduits par un manque de connaissances techniques et de personnel qualifie, les commissaires de l'OER se revelent perspicaces et parviennent a mettre sur pied un systeme cooperatif d'electrification rurale qui produit des resultats rapides. Il leur faudra cependant compter sur l'aide des autres acteurs engages dans l'electrification, les organismes publics et les compagnies privees d'electricite. Cette periode de demarrage et d'organisation, traitee dans la deuxieme partie de la these, se termine en 1947-48, au moment ou l'OER et les cooperatives raffermissent leur maitrise du systeme cooperatif d'electrification rurale. Les annees 1948 a 1955 (troisieme partie de these) correspondent a une periode de croissance pour le mouvement cooperatif. Cette partie scrute ainsi le developpement des cooperatives, les vastes chantiers de construction et l'injection de millions de dollars dans l'electrification rurale. Cette troisieme partie prend egalement acte des premiers signes que quelque chose ne va pas si bien dans le monde cooperatif. Nous y verrons egalement les ruraux a l'oeuvre: comme membres, d'abord, mais aussi en tant que benevoles, puis a l'emploi des cooperatives. La quatrieme et derniere partie, les annees 1956 a 1964, aborde les changements majeurs qui ont cours dans l'univers cooperatif; il s'agit d'une ere nouvelle et difficile pour le mouvement cooperatif, dont les reseaux paraissent inadaptes aux changements de profil de la consommation d'electricite des usagers. L'OER sent alors le besoin de raffermir son controle des cooperatives, car il pressent les problemes et les defis auxquels elles auront a faire face. Notre etude se termine par l'acquisition des cooperatives par Hydro-Quebec, en 1963-64. Fondee sur des sources riches et variees, notre demarche propose un eclairage inedit sur une dimension importante de l'histoire de l'electricite au Quebec. Elle permet, ce faisant, de saisir les rouages et l'action de l'Etat sous un angle particulier, avant sa profonde transformation amorcee au cours des annees 1960. De meme, elle apporte quelques cles nouvelles pour une meilleure comprehension de la dynamique des milieux ruraux de cette periode.

Stimulatory effect of desipramine on lung metastases of adenocarcinoma MADB 106 in stress highly-sensitive and stress non-reactive rats.

PubMed

Grygier, Beata; Kubera, Marta; Wrona, Danuta; Roman, Adam; Basta-Kaim, Agnieszka; Gruca, Piotr; Papp, Mariusz; Rogoz, Zofia; Leskiewicz, Monika; Budziszewska, Boguslawa; Regulska, Magdalena; Korzeniak, Barbara; Curzytek, Katarzyna; Glombik, Katarzyna; Slusarczyk, Joanna; Maes, Michael; Lason, Wladyslaw

2018-01-03

The effect of antidepressant drugs on tumor progress is very poorly recognized. The aim of the present study was to examine the effect of individual reactivity to stress and 24-day desipramine (DES) administration on the metastatic colonization of adenocarcinoma MADB 106 cells in the lungs of Wistar rats. Wistar rats were subjected to stress procedure according to the chronic mild stress (CMS) model of depression for two weeks and stress highly-sensitive (SHS) and stress non-reactive (SNR) rats were selected. SHS rats were more prone to cancer metastasis than SNR ones and chronic DES treatment further increased the number of lung metastases by 59% and 50% in comparison to vehicle-treated appropriate control rats. The increase in lung metastases was connected with DES-induced skew macrophage activity towards M2 functional phenotype in SHS and SNR rats. Moreover, during 24h after DES injection in healthy rats, the decreased number of TCD8 + and B cells in SHS and SNR rats as well as NK cell cytotoxic activity in SNR rats could be attributed to the lowered capacity to defend against cancer metastasis observed in chronic DES treated and tumor injected rats. Copyright © 2017. Published by Elsevier Inc.

Basie Instrumentation of a Low Speed Axial Compressor

NASA Astrophysics Data System (ADS)

Blidi, Sami; Miton, Hubert

1995-07-01

The flow modelling depending on test results allows a best aerodynamic comprehension. For this reason, a test bed of L.E.M.F.I.'s axial compressor has been set and instrumented for a detailed exploration of the flow in a four-stage turbomachine characterised by a little spacing between blade rows. In this paper, first are given brief descriptions of the geometrical characteristics of this compressor, the test bed's control system operation and the instrumentation set. Next, measures for the exploration of flow are discussed. Finally, typical results concerning the global and local performance measurements and their analysis are presented. This work permitted to instrument the L.E.M.F.I.'s four-stage axial compressor test bed and obtain the flow steady and unsteady characteristics using the five-hole and hot film probes. Les études de modélisation de l'écoulement dans les compresseurs axiaux doivent s'appuyer sur des résultats expérimentaux permettant une meilleure compréhension des phénomènes aérodynamiques et convenant à la validation des codes numériques. À cette fin, un banc d'essais de compresseur axial basse vitesse a été rais au point et instrumenté au L.E.M.F.I.[1] pour des explorations détaillées de l'écoulement dans une machine comportant 4étages, caractérisée par le faible espacement entre les rangées d'aubages. Dans cet article, nous décrivons brièvement les caractéristiques géométriques du compresseur axial, les systèmes de contrôle du fonctionnement du banc d'essais et l'instrumentation mise au point. Nous parlons ensuite des moyens d'explorations de l'écoulement utilisés. Nous fournissons enfin des exemples de résultats de mesure des performances globales et locales du compresseur et analysons brièvement ces résultats. Le travail effectué a permis de mettre au point et d'instrumenter un banc d'essais de compresseur axial basse vitesse au L.E.M.F.I. et rendu possible la détermination des grandeurs stationnaires et instationnaires de l'écoulement entre les rangées d'aubages en utilisant des sondes clinométriques de pression et des sondes à films chauds.

The use of surrogates for an optimal management of coupled groundwater-agriculture hydrosystems

NASA Astrophysics Data System (ADS)

Grundmann, J.; Schütze, N.; Brettschneider, M.; Schmitz, G. H.; Lennartz, F.

2012-04-01

For ensuring an optimal sustainable water resources management in arid coastal environments, we develop a new simulation based integrated water management system. It aims at achieving best possible solutions for groundwater withdrawals for agricultural and municipal water use including saline water management together with a substantial increase of the water use efficiency in irrigated agriculture. To achieve a robust and fast operation of the management system regarding water quality and water quantity we develop appropriate surrogate models by combining physically based process modelling with methods of artificial intelligence. Thereby we use an artificial neural network for modelling the aquifer response, inclusive the seawater interface, which was trained on a scenario database generated by a numerical density depended groundwater flow model. For simulating the behaviour of high productive agricultural farms crop water production functions are generated by means of soil-vegetation-atmosphere-transport (SVAT)-models, adapted to the regional climate conditions, and a novel evolutionary optimisation algorithm for optimal irrigation scheduling and control. We apply both surrogates exemplarily within a simulation based optimisation environment using the characteristics of the south Batinah region in the Sultanate of Oman which is affected by saltwater intrusion into the coastal aquifer due to excessive groundwater withdrawal for irrigated agriculture. We demonstrate the effectiveness of our methodology for the evaluation and optimisation of different irrigation practices, cropping pattern and resulting abstraction scenarios. Due to contradicting objectives like profit-oriented agriculture vs. aquifer sustainability a multi-criterial optimisation is performed.

Optimisation of an idealised primitive equation ocean model using stochastic parameterization

NASA Astrophysics Data System (ADS)

Cooper, Fenwick C.

2017-05-01

Using a simple parameterization, an idealised low resolution (biharmonic viscosity coefficient of 5 × 1012 m4s-1 , 128 × 128 grid) primitive equation baroclinic ocean gyre model is optimised to have a much more accurate climatological mean, variance and response to forcing, in all model variables, with respect to a high resolution (biharmonic viscosity coefficient of 8 × 1010 m4s-1 , 512 × 512 grid) equivalent. For example, the change in the climatological mean due to a small change in the boundary conditions is more accurate in the model with parameterization. Both the low resolution and high resolution models are strongly chaotic. We also find that long timescales in the model temperature auto-correlation at depth are controlled by the vertical temperature diffusion parameter and time mean vertical advection and are caused by short timescale random forcing near the surface. This paper extends earlier work that considered a shallow water barotropic gyre. Here the analysis is extended to a more turbulent multi-layer primitive equation model that includes temperature as a prognostic variable. The parameterization consists of a constant forcing, applied to the velocity and temperature equations at each grid point, which is optimised to obtain a model with an accurate climatological mean, and a linear stochastic forcing, that is optimised to also obtain an accurate climatological variance and 5 day lag auto-covariance. A linear relaxation (nudging) is not used. Conservation of energy and momentum is discussed in an appendix.

Method for the controlled liberation of fusion nuclear energy (in French)

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1972-08-18

L'invention concerne des reactions thermonucleaires. Elle se rapporte a un procede de fusion dans lequel de l'energie laser est concentree sur de minuscules spheres de combustible forme de deuterium et de tritium, de maniere a creer d'une part un plasma superficiel assurant un transfert efficace d'energie et d'autre part des ondes de choc convergeant au centre et assurant la fusion nucleaire de la matiere centrale. Ceci est applicable a la production d'energie thermique par fusion nucleaire. (FR)

Theoretical and Experimental Methods in Hypersonic Flows (Les Methodes Theoriques et Experimentales pour l’Etude Des Ecoulements Hypersoniques)

DTIC Science & Technology

1993-04-01

PROCEEDINGS 514 OELECTE f Theoretical and A U Experimental Methods in A Hypersonic Flows (Les Methodes Th6oriques et Experimentales pour 1’Etude des...nitrogen ent for both equilibrium and non -equilibrium chemistry between the two groups . Both groups state that the boundary makes this mode even more...flowfield on control is also m?,ndatory unstable due to the necessary oblate shape of Hermes. when the experimental rebuilding is clearly poor and

The Design, Development and Testing of Complex Avionics Systems: Conference Proceedings Held at the Avionics Panel Symposium in Las Vegas, Nevada on 27 April-1 May 1987

DTIC Science & Technology

1987-12-01

Normally, the system is decomposed into manageable parts with accurately defined interfaces. By rigidly controlling this process, aerospace companies have...Reference A CHANGE IN SYSTEM DESIGN EMPHASIS: FROM MACHINE TO MAN by M.L.Metersky and J.L.Ryder 16 SESSION I1 - MANAGING THE FUl URE SYSTEM DESIGN...PROCESS MANAGING ADVANCED AVIONIC SYSTEM DESIGN by P.Simons 17 ERGONOMIE PSYCHOSENSORIELLE DES COCKPITS, INTERET DES SYSTEMES INFORMATIQUES INTELLIGENTS

The Impact of New Guidance and Control Systems on Military Aircraft Cockpit Design.

DTIC Science & Technology

1981-08-01

de r~duction des surfaces de planche de bord et de complexit6 des interfaces homme /machine darns les a~ronefs de combat A haute performance...taut remarquer que dana l ’&tat actuel do la technique, une machine de reconnaissance do parole n’a pas do performances en propre. Sea performances...L’organe principal du dialogue 6tant une console A tube cathodique et clavier. L I ___ 15-3 Le vocabulaire comportait 119 mots, extraits de

Developpement D'un Modele Climatique Regional: Fizr Simulation des Conditions de Janvier de la Cote Ouest Nord Americaine

NASA Astrophysics Data System (ADS)

Goyette, Stephane

1995-11-01

Le sujet de cette these concerne la modelisation numerique du climat regional. L'objectif principal de l'exercice est de developper un modele climatique regional ayant les capacites de simuler des phenomenes de meso-echelle spatiale. Notre domaine d'etude se situe sur la Cote Ouest nord americaine. Ce dernier a retenu notre attention a cause de la complexite du relief et de son controle sur le climat. Les raisons qui motivent cette etude sont multiples: d'une part, nous ne pouvons pas augmenter, en pratique, la faible resolution spatiale des modeles de la circulation generale de l'atmosphere (MCG) sans augmenter a outrance les couts d'integration et, d'autre part, la gestion de l'environnement exige de plus en plus de donnees climatiques regionales determinees avec une meilleure resolution spatiale. Jusqu'alors, les MCG constituaient les modeles les plus estimes pour leurs aptitudes a simuler le climat ainsi que les changements climatiques mondiaux. Toutefois, les phenomenes climatiques de fine echelle echappent encore aux MCG a cause de leur faible resolution spatiale. De plus, les repercussions socio-economiques des modifications possibles des climats sont etroitement liees a des phenomenes imperceptibles par les MCG actuels. Afin de circonvenir certains problemes inherents a la resolution, une approche pratique vise a prendre un domaine spatial limite d'un MCG et a y imbriquer un autre modele numerique possedant, lui, un maillage de haute resolution spatiale. Ce processus d'imbrication implique alors une nouvelle simulation numerique. Cette "retro-simulation" est guidee dans le domaine restreint a partir de pieces d'informations fournies par le MCG et forcee par des mecanismes pris en charge uniquement par le modele imbrique. Ainsi, afin de raffiner la precision spatiale des previsions climatiques de grande echelle, nous developpons ici un modele numerique appele FIZR, permettant d'obtenir de l'information climatique regionale valide a la fine echelle spatiale. Cette nouvelle gamme de modeles-interpolateurs imbriques qualifies d'"intelligents" fait partie de la famille des modeles dits "pilotes". L'hypothese directrice de notre etude est fondee sur la supposition que le climat de fine echelle est souvent gouverne par des forcages provenant de la surface plutot que par des transports atmospheriques de grande echelle spatiale. La technique que nous proposons vise donc a guider FIZR par la Dynamique echantillonnee d'un MCG et de la forcer par la Physique du MCG ainsi que par un forcage orographique de meso-echelle, en chacun des noeuds de la grille fine de calculs. Afin de valider la robustesse et la justesse de notre modele climatique regional, nous avons choisi la region de la Cote Ouest du continent nord americain. Elle est notamment caracterisee par une distribution geographique des precipitations et des temperatures fortement influencee par le relief sous-jacent. Les resultats d'une simulation d'un mois de janvier avec FIZR demontrent que nous pouvons simuler des champs de precipitations et de temperatures au niveau de l'abri beaucoup plus pres des observations climatiques comparativement a ceux simules a partir d'un MCG. Ces performances sont manifestement attribuees au forcage orographique de meso-echelle de meme qu'aux caracteristiques de surface determinees a fine echelle. Un modele similaire a FIZR peut, en principe, etre implante sur l'importe quel MCG, donc, tout organisme de recherche implique en modelisation numerique mondiale de grande echelle pourra se doter d'un el outil de regionalisation.

Recovery of radiation-induced dry eye and corneal damage by pretreatment with adenoviral vector-mediated transfer of erythropoietin to the salivary glands in mice.

PubMed

Rocha, Eduardo M; Cotrim, Ana P; Zheng, Changyu; Riveros, Paola Perez; Baum, Bruce J; Chiorini, John A

2013-04-01

Therapeutic doses of radiation (RTx) causes dry eye syndrome (DES), dry mouth, and as in other sicca syndromes, they are incurable. The aims of this work are as follows: (a) to evaluate a mouse model of DES induced by clinically relevant doses of radiation, and (b) to evaluate the protective effect of erythropoietin (Epo) in preventing DES. C3H female mice were subjected to five sessions of RTx, with or without pre-RTx retroductal administration of the AdLTR2EF1a-hEPO (AdEpo) vector in the salivary glands (SG), and compared with naïve controls at Day 10 (10d) (8 Gy fractions) and 56 days (56d) (6 Gy fractions) after RTx treatment. Mice were tested for changes in lacrimal glands (LG), tear secretion (phenol red thread), weight, hematocrit (Hct), and markers of inflammation, as well as microvessels and oxidative damage. Tear secretion was reduced in both RTx groups, compared to controls, by 10d. This was also seen at 56d in RTx but not AdEpo+RTx group. Hct was significantly higher in all AdEpo+RTx mice at 10d and 56d. Corneal epithelium was significantly thinner at 10d in the RTx group compared with AdEpo+RTx or the control mice. There was a significant reduction at 10d in vascular endothelial growth factor (VEGF)-R2 in LG in the RTx group that was prevented in the AdEpo+RTx group. In conclusion, RTx is able to induce DES in mice. AdEpo administration protected corneal epithelia and resulted in some recovery of LG function, supporting the value of further studies using gene therapy for extraglandular diseases.

Abnormal morphology of the penis in male rats exposed neonatally to diethylstilbestrol is associated with altered profile of estrogen receptor-alpha protein, but not of androgen receptor protein: a developmental and immunocytochemical study.

PubMed

Goyal, H O; Braden, T D; Williams, C S; Dalvi, P; Mansour, M M; Mansour, M; Williams, J W; Bartol, F F; Wiley, A A; Birch, L; Prins, G S

2004-05-01

Objectives of the study were to determine developmental changes in morphology and expression of androgen receptor (AR) and estrogen receptor (ER)alpha in the body of the rat penis exposed neonatally to diethylstilbestrol (DES). Male pups received DES at a dose of 10 microg per rat on alternate days from Postnatal Day 2 to Postnatal Day 12. Controls received olive oil vehicle only. Tissue samples were collected on Days 18 (prepuberty), 41 (puberty), and 120 (adult) of age. DES-induced abnormalities were evident at 18 days of age and included smaller, lighter, and thinner penis, loss of cavernous spaces and associated smooth muscle cells, and increased deposition of fat cells in the corpora cavernosa penis. Fat cells virtually filled the entire area of the corpora cavernosa at puberty and adulthood. Plasma testosterone (T) was reduced to an undetectable level, while LH was unaltered in all treated groups. AR-positive cells were ubiquitous and their profile (incidence and staining intensity) did not differ between control and treated rats of the respective age groups. Conversely, ERalpha-positive cells were limited to the stroma of corpus spongiosus in all age groups of both control and treated rats, but the expression in treated rats at 18 days was up-regulated in stromal cells of corpora cavernosa, coincident with the presence of morphological abnormalities. Hence, this study reports for the first time DES-induced developmental, morphological abnormalities in the body of the penis and suggests that these abnormalities may have resulted from decreased T and/or overexpression of ERalpha.

CAMELOT: Computational-Analytical Multi-fidElity Low-thrust Optimisation Toolbox

NASA Astrophysics Data System (ADS)

Di Carlo, Marilena; Romero Martin, Juan Manuel; Vasile, Massimiliano

2018-03-01

Computational-Analytical Multi-fidElity Low-thrust Optimisation Toolbox (CAMELOT) is a toolbox for the fast preliminary design and optimisation of low-thrust trajectories. It solves highly complex combinatorial problems to plan multi-target missions characterised by long spirals including different perturbations. To do so, CAMELOT implements a novel multi-fidelity approach combining analytical surrogate modelling and accurate computational estimations of the mission cost. Decisions are then made using two optimisation engines included in the toolbox, a single-objective global optimiser, and a combinatorial optimisation algorithm. CAMELOT has been applied to a variety of case studies: from the design of interplanetary trajectories to the optimal de-orbiting of space debris and from the deployment of constellations to on-orbit servicing. In this paper, the main elements of CAMELOT are described and two examples, solved using the toolbox, are presented.

Tail mean and related robust solution concepts

NASA Astrophysics Data System (ADS)

Ogryczak, Włodzimierz

2014-01-01

Robust optimisation might be viewed as a multicriteria optimisation problem where objectives correspond to the scenarios although their probabilities are unknown or imprecise. The simplest robust solution concept represents a conservative approach focused on the worst-case scenario results optimisation. A softer concept allows one to optimise the tail mean thus combining performances under multiple worst scenarios. We show that while considering robust models allowing the probabilities to vary only within given intervals, the tail mean represents the robust solution for only upper bounded probabilities. For any arbitrary intervals of probabilities the corresponding robust solution may be expressed by the optimisation of appropriately combined mean and tail mean criteria thus remaining easily implementable with auxiliary linear inequalities. Moreover, we use the tail mean concept to develope linear programming implementable robust solution concepts related to risk averse optimisation criteria.

A CONCEPTUAL FRAMEWORK FOR MANAGING RADIATION DOSE TO PATIENTS IN DIAGNOSTIC RADIOLOGY USING REFERENCE DOSE LEVELS.

PubMed

Almén, Anja; Båth, Magnus

2016-06-01

The overall aim of the present work was to develop a conceptual framework for managing radiation dose in diagnostic radiology with the intention to support optimisation. An optimisation process was first derived. The framework for managing radiation dose, based on the derived optimisation process, was then outlined. The outset of the optimisation process is four stages: providing equipment, establishing methodology, performing examinations and ensuring quality. The optimisation process comprises a series of activities and actions at these stages. The current system of diagnostic reference levels is an activity in the last stage, ensuring quality. The system becomes a reactive activity only to a certain extent engaging the core activity in the radiology department, performing examinations. Three reference dose levels-possible, expected and established-were assigned to the three stages in the optimisation process, excluding ensuring quality. A reasonably achievable dose range is also derived, indicating an acceptable deviation from the established dose level. A reasonable radiation dose for a single patient is within this range. The suggested framework for managing radiation dose should be regarded as one part of the optimisation process. The optimisation process constitutes a variety of complementary activities, where managing radiation dose is only one part. This emphasises the need to take a holistic approach integrating the optimisation process in different clinical activities. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Increased Risk of Rare Cancer as DES Daughters Age

MedlinePlus

... Radon What We Know What States Can Do Case Study: Reducing Radon in Illinois What Comprehensive Cancer Control ... United States. Cancer Causes and Control 2012;23(1):207–211. Stay Informed Language: English (US) Español ( ...

Physiological effects and optimisation of nasal assist-control ventilation for patients with chronic obstructive pulmonary disease in respiratory failure

PubMed Central

Girault, C.; Chevron, V.; Richard, J. C.; Daudenthun, I.; Pasquis, P.; Leroy, J.; Bonmarchand, G.

1997-01-01

BACKGROUND: A study was undertaken to investigate the effects of non- invasive assist-control ventilation (ACV) by nasal mask on respiratory physiological parameters and comfort in acute on chronic respiratory failure (ACRF). METHODS: Fifteen patients with chronic obstructive pulmonary disease (COPD) were prospectively and randomly assigned to two non-invasive ventilation (NIV) sequences in spontaneous breathing (SB) and ACV mode. ACV settings were always optimised and therefore subsequently adjusted according to patient's tolerance and air leaks. RESULTS: ACV significantly decreased all the total inspiratory work of breathing (WOBinsp) parameters, pressure time product, and oesophageal pressure variation in comparison with SB mode. The ACV mode also resulted in a significant reduction in surface diaphragmatic electromyographic activity to 36% of the control values and significantly improved the breathing pattern. SB did not change the arterial blood gas tensions from baseline values whereas ACV significantly improved both the PaO2 from a mean (SD) of 8.45 (2.95) kPa to 13.31 (2.15) kPa, PaCO2 from 9.52 (1.61) kPa to 7.39 (1.39) kPa, and the pH from 7.32 (0.03) to 7.40 (0.07). The respiratory comfort was significantly lower with ACV than with SB. CONCLUSIONS: This study shows that the clinical benefit of non-invasive ACV in the management of ACRF in patients with COPD results in a reduced inspiratory muscle activity providing an improvement in breathing pattern and gas exchange. Despite respiratory discomfort, the muscle rest provided appears sufficient when ACV settings are optimised. 


 PMID:9337827

Etude experimentale et optimisation d'un systeme hybride hydraulique pour camions a ordures et amelioration des performances par raffinement de sa logique de controle

NASA Astrophysics Data System (ADS)

Lacroix, Benoit

The aim of this thesis is to demonstrate experimentally the operation of a hydraulic hybrid system specifically dedicated to the application of refuse trucks in addition to proposing solutions to improve its control strategy. The developed hybrid system recovers the vehicle's kinetic energy during braking. A variable displacement hydraulic motor then uses the energy stored in a hydraulic accumulator to assist the internal combustion engine (ICE) at suitable times. The particular aspect of this system is that assistance to the ICE can occur when it operates at idle and drives the auxiliary hydraulic equipment of the refuse truck. Essentially, the control strategy initially developed maximizes the recovery of braking energy and uses that energy to minimize the solicitation of the ICE at idle. The experimental results obtained with two prototypes tested in real operating conditions show that the hybrid system can recover a significant portion of braking energy. In addition, the results show that it is possible to reduce the load on the ICE during idle with the application of an assisting torque. However, the advantage of assisting the ICE in specific areas of the operating range is slim since the ICE's gross efficiency varies only slightly depending on conditions of operation. This is confirmed by the optimization of the control logic using deterministic dynamic programming. Indeed, by managing the pressure in the accumulator to maximize the amount of energy recovered during braking and by dosing the assistance to the ICE in an ideal fashion, the optimal control only managed to improve fuel savings by 6% in comparison to the original control. Therefore, since the efforts that would be required to emulate the ideal behavior in real time are significant for a relatively small and uncertain gain, the initial control logic is considered near optimal. Finally, this thesis proposes an improved version of the torque assisting hybrid system that could shut down the ICE when the vehicle is stopped while maintaining functional the auxiliary hydraulic equipment. An optimization of the control logic indicates that proper management of the pressure in the accumulator would allow turning off the ICE most of the time at stop and thus, would increase the fuel savings by over 40% compared to the original system. The simulation of a basic control strategy shows that such pressure management may be feasible in real time and that the potential gain in fuel savings is achievable. Keywords: hybrid system, hydraulic, control, refuse truck.

Optimised detection of mitochondrial DNA strand breaks.

PubMed

Hanna, Rebecca; Crowther, Jonathan M; Bulsara, Pallav A; Wang, Xuying; Moore, David J; Birch-Machin, Mark A

2018-05-04

Intrinsic and extrinsic factors that induce cellular oxidative stress damage tissue integrity and promote ageing, resulting in accumulative strand breaks to the mitochondrial DNA (mtDNA) genome. Limited repair mechanisms and close proximity to superoxide generation make mtDNA a prominent biomarker of oxidative damage. Using human DNA we describe an optimised long-range qPCR methodology that sensitively detects mtDNA strand breaks relative to a suite of short mitochondrial and nuclear DNA housekeeping amplicons, which control for any variation in mtDNA copy number. An application is demonstrated by detecting 16-36-fold mtDNA damage in human skin cells induced by hydrogen peroxide and solar simulated radiation. Copyright © 2018 Elsevier B.V. and Mitochondria Research Society. All rights reserved.

BluePyOpt: Leveraging Open Source Software and Cloud Infrastructure to Optimise Model Parameters in Neuroscience.

PubMed

Van Geit, Werner; Gevaert, Michael; Chindemi, Giuseppe; Rössert, Christian; Courcol, Jean-Denis; Muller, Eilif B; Schürmann, Felix; Segev, Idan; Markram, Henry

2016-01-01

At many scales in neuroscience, appropriate mathematical models take the form of complex dynamical systems. Parameterizing such models to conform to the multitude of available experimental constraints is a global non-linear optimisation problem with a complex fitness landscape, requiring numerical techniques to find suitable approximate solutions. Stochastic optimisation approaches, such as evolutionary algorithms, have been shown to be effective, but often the setting up of such optimisations and the choice of a specific search algorithm and its parameters is non-trivial, requiring domain-specific expertise. Here we describe BluePyOpt, a Python package targeted at the broad neuroscience community to simplify this task. BluePyOpt is an extensible framework for data-driven model parameter optimisation that wraps and standardizes several existing open-source tools. It simplifies the task of creating and sharing these optimisations, and the associated techniques and knowledge. This is achieved by abstracting the optimisation and evaluation tasks into various reusable and flexible discrete elements according to established best-practices. Further, BluePyOpt provides methods for setting up both small- and large-scale optimisations on a variety of platforms, ranging from laptops to Linux clusters and cloud-based compute infrastructures. The versatility of the BluePyOpt framework is demonstrated by working through three representative neuroscience specific use cases.

Basis for the development of sustainable optimisation indicators for activated sludge wastewater treatment plants in the Republic of Ireland.

PubMed

Gordon, G T; McCann, B P

2015-01-01

This paper describes the basis of a stakeholder-based sustainable optimisation indicator (SOI) system to be developed for small-to-medium sized activated sludge (AS) wastewater treatment plants (WwTPs) in the Republic of Ireland (ROI). Key technical publications relating to best practice plant operation, performance audits and optimisation, and indicator and benchmarking systems for wastewater services are identified. Optimisation studies were developed at a number of Irish AS WwTPs and key findings are presented. A national AS WwTP manager/operator survey was carried out to verify the applied operational findings and identify the key operator stakeholder requirements for this proposed SOI system. It was found that most plants require more consistent operational data-based decision-making, monitoring and communication structures to facilitate optimised, sustainable and continuous performance improvement. The applied optimisation and stakeholder consultation phases form the basis of the proposed stakeholder-based SOI system. This system will allow for continuous monitoring and rating of plant performance, facilitate optimised operation and encourage the prioritisation of performance improvement through tracking key operational metrics. Plant optimisation has become a major focus due to the transfer of all ROI water services to a national water utility from individual local authorities and the implementation of the EU Water Framework Directive.

Application of an automation system and a supervisory control and data acquisition (SCADA) system for the optimal operation of a membrane adsorption hybrid system.

PubMed

Smith, P J; Vigneswaran, S; Ngo, H H; Nguyen, H T; Ben-Aim, R

2006-01-01

The application of automation and supervisory control and data acquisition (SCADA) systems to municipal water and wastewater treatment plants is rapidly increasing. However, the application of these systems is less frequent in the research and development phases of emerging treatment technologies used in these industries. This study involved the implementation of automation and a SCADA system to the submerged membrane adsorption hybrid system for use in a semi-pilot scale research project. An incremental approach was used in the development of the automation and SCADA systems, leading to the development of two new control systems. The first system developed involved closed loop control of the backwash initiation, based upon a pressure increase, leading to productivity improvements as the backwash is only activated when required, not at a fixed time. This system resulted in a 40% reduction in the number of backwashes required and also enabled optimised operations under unsteady concentrations of wastewater. The second system developed involved closed loop control of the backwash duration, whereby the backwash was terminated when the pressure reached a steady state. This system resulted in a reduction of the duration of the backwash of up to 25% and enabled optimised operations as the foulant build-up within the reactor increased.

The effect of rehabilitation exercises combined with direct vagina low voltage low frequency electric stimulation on pelvic nerve electrophysiology and tissue function in primiparous women: A randomised controlled trial.

PubMed

Yang, Sumian; Sang, Wenshu; Feng, Jing; Zhao, Haifeng; Li, Xian; Li, Ping; Fan, Hongfang; Tang, Zengjun; Gao, Lina

2017-12-01

To evaluate the effect of rehabilitation exercises combined with Direct Vagina Low Voltage Low Frequency Electric Stimulation (DES) on pelvic nerve electrophysiology and tissue function after delivery. Whether and how DES effects pelvic floor dysfunction (PFD) are not known clearly. This was a randomised, controlled clinical trial. The 189 primiparous women 20-35 years old and with an episiotomy or second degree episiotomy tear were divided into three groups: the control group (n = 60) received routine postpartum guidance 2 hr postpartum, the training group (n = 63) performed rehabilitation exercises (Kegel exercises and pelvic movements) from 2 days postpartum until 3 months postpartum, and the combination group (n = 66) received DES 15 times (3 times a week for 30 min at a time) beginning at the sixth week postpartum in addition to performing rehabilitation exercises. Adopt international standard scale and score method to inspect maternal life treatment, such as pelvic organ prolapse situation (POP-Q division), the degree of incontinence score and pelvic floor muscle intensity of muscular contraction. Data were collected during the third month after delivery. Three months postpartum, there were differences among the three groups in the POP-Q grade, the degree of incontinence score, the Oxford grade for pelvic floor muscle strength and the pelvic floor muscle electrophysiology condition. Additionally, there were significant differences regarding the pubic symphysis clearance. Rehabilitation exercises can promote healing of the maternal pubic symphysis and recovery of the pelvis. The total electrical value, type I muscle fibre strength and type II muscle fibre strength were significantly increased in the combination group after treatment than before treatment. Rehabilitation exercises combined with DES were beneficial to the recovery of postpartum pelvic nerve tissue function, and a synergistic effect was observed when the two methods were combined. These conclusions justify that rehabilitation exercise combined with DES can better relieve uncomfortable symptoms postpartum and improve the women's quality of life. © 2017 John Wiley & Sons Ltd.

Assessment of energy-saving strategies and operational costs in full-scale membrane bioreactors.

PubMed

Gabarrón, S; Ferrero, G; Dalmau, M; Comas, J; Rodriguez-Roda, I

2014-02-15

The energy-saving strategies and operational costs of stand-alone, hybrid, and dual stream full-scale membrane bioreactors (MBRs) with capacities ranging from 1100 to 35,000 m(3) day(-1) have been assessed for seven municipal facilities located in Northeast Spain. Although hydraulic load was found to be the main determinant factor for the energy consumption rates, several optimisation strategies have shown to be effective in terms of energy reduction as well as fouling phenomenon minimization or preservation. Specifically, modifications of the biological process (installation of control systems for biological aeration) and of the filtration process (reduction of the flux or mixed liquor suspended solids concentration and installation of control systems for membrane air scouring) were applied in two stand-alone MBRs. After implementing these strategies, the yearly specific energy demand (SED) in flat-sheet (FS) and hollow-fibre (HF) stand-alone MBRs was reduced from 1.12 to 0.71 and from 1.54 to 1.12 kW h(-1) m(-3), respectively, regardless of their similar yearly averaged hydraulic loads. The strategies applied in the hybrid MBR, namely, buffering the influent flow and optimisation of both biological aeration and membrane air-scouring, reduced the SED values by 14%. These results illustrate that it is possible to apply energy-saving strategies to significantly reduce MBR operational costs, highlighting the need to optimise MBR facilities to reconsider them as an energy-competitive option. Copyright © 2014 Elsevier Ltd. All rights reserved.

Le niobate de lithium a haute temperature pour les applications ultrasons =

NASA Astrophysics Data System (ADS)

De Castilla, Hector

L'objectif de ce travail de maitrise en sciences appliquees est de trouver puis etudier un materiau piezoelectrique qui est potentiellement utilisable dans les transducteurs ultrasons a haute temperature. En effet, ces derniers sont actuellement limites a des temperatures de fonctionnement en dessous de 300°C a cause de l'element piezoelectrique qui les compose. Palier a cette limitation permettrait des controles non destructifs par ultrasons a haute temperature. Avec de bonnes proprietes electromecaniques et une temperature de Curie elevee (1200°C), le niobate de lithium (LiNbO 3) est un bon candidat. Mais certaines etudes affirment que des processus chimiques tels que l'apparition de conductivite ionique ou l'emergence d'une nouvelle phase ne permettent pas son utilisation dans les transducteurs ultrasons au-dessus de 600°C. Cependant, d'autres etudes plus recentes ont montre qu'il pouvait generer des ultrasons jusqu'a 1000°C et qu'aucune conductivite n'etait visible. Une hypothese a donc emerge : une conductivite ionique est presente dans le niobate de lithium a haute temperature (>500°C) mais elle n'affecte que faiblement ses proprietes a hautes frequences (>100 kHz). Une caracterisation du niobate de lithium a haute temperature est donc necessaire afin de verifier cette hypothese. Pour cela, la methode par resonance a ete employee. Elle permet une caracterisation de la plupart des coefficients electromecaniques avec une simple spectroscopie d'impedance electrochimique et un modele reliant de facon explicite les proprietes au spectre d'impedance. Il s'agit de trouver les coefficients du modele permettant de superposer au mieux le modele avec les mesures experimentales. Un banc experimental a ete realise permettant de controler la temperature des echantillons et de mesurer leur impedance electrochimique. Malheureusement, les modeles actuellement utilises pour la methode par resonance sont imprecis en presence de couplages entre les modes de vibration. Cela implique de posseder plusieurs echantillons de differentes formes afin d'isoler chaque mode principal de vibration. De plus, ces modeles ne prennent pas bien en compte les harmoniques et modes en cisaillement. C'est pourquoi un nouveau modele analytique couvrant tout le spectre frequentiel a ete developpe afin de predire les resonances en cisaillement, les harmoniques et les couplages entre les modes. Neanmoins, certains modes de resonances et certains couplages ne sont toujours pas modelises. La caracterisation d'echantillons carres a pu etre menee jusqu'a 750°C. Les resultats confirment le caractere prometteur du niobate de lithium. Les coefficients piezoelectriques sont stables en fonction de la temperature et l'elasticite et la permittivite ont le comportement attendu. Un effet thermoelectrique ayant un effet similaire a de la conductivite ionique a ete observe ce qui ne permet pas de quantifier l'impact de ce dernier. Bien que des etudes complementaires soient necessaires, l'intensite des resonances a 750°C semble indiquer que le niobate de lithium peut etre utilise pour des applications ultrasons a hautes frequences (>100 kHz).

Effects of In Utero Exposure to Bisphenol A or Diethylstilbestrol on the Adult Male Reproductive System

PubMed Central

LaRocca, Jessica; Boyajian, Alanna; Brown, Caitlin; Smith, Stuart Duncan; Hixon, Mary

2011-01-01

The objective of this study was to determine if in utero exposure to Bisphenol A (BPA) induced reproductive tract abnormalities in the adult male testis. Using the C57/Bl6 mouse, we examined sex-organ weights, anogenital distance (AGD), and testis histopathology in adult males exposed in utero via oral gavage to sesame oil, 50 μg/kg BPA, 1,000 μg/kg BPA, or 2 μg/kg diethylstilbestrol (DES) as a positive control from gestational days 10–16. No changes in sperm production or germ cell apoptosis were observed in adult testes following exposure to either chemical. Adult mRNA levels of genes associated with sexual maturation and differentiation, GATA4 and ID2, were significantly lower only in DES-exposed testes. In summary, the data indicate no gross alterations in spermatogenesis following in utero exposure to BPA or DES. At the molecular level, in utero exposure to DES, but not BPA, leads to decreased mRNA expression of genes associated with Sertoli cell differentiation. PMID:21922642

C-Terminal End-Directed Protein Elimination by CRL2 Ubiquitin Ligases.

PubMed

Lin, Hsiu-Chuan; Yeh, Chi-Wei; Chen, Yen-Fu; Lee, Ting-Ting; Hsieh, Pei-Yun; Rusnac, Domnita V; Lin, Sung-Ya; Elledge, Stephen J; Zheng, Ning; Yen, Hsueh-Chi S

2018-05-17

The proteolysis-assisted protein quality control system guards the proteome from potentially detrimental aberrant proteins. How miscellaneous defective proteins are specifically eliminated and which molecular characteristics direct them for removal are fundamental questions. We reveal a mechanism, DesCEND (destruction via C-end degrons), by which CRL2 ubiquitin ligase uses interchangeable substrate receptors to recognize the unusual C termini of abnormal proteins (i.e., C-end degrons). C-end degrons are mostly less than ten residues in length and comprise a few indispensable residues along with some rather degenerate ones. The C-terminal end position is essential for C-end degron function. Truncated selenoproteins generated by translation errors and the USP1 N-terminal fragment from post-translational cleavage are eliminated by DesCEND. DesCEND also targets full-length proteins with naturally occurring C-end degrons. The C-end degron in DesCEND echoes the N-end degron in the N-end rule pathway, highlighting the dominance of protein "ends" as indicators for protein elimination. Copyright © 2018 Elsevier Inc. All rights reserved.

Development and optimisation of atorvastatin calcium loaded self-nanoemulsifying drug delivery system (SNEDDS) for enhancing oral bioavailability: in vitro and in vivo evaluation.

PubMed

Kassem, Abdulsalam M; Ibrahim, Hany M; Samy, Ahmed M

2017-05-01

The objective of this study was to develop and optimise self-nanoemulsifying drug delivery system (SNEDDS) of atorvastatin calcium (ATC) for improving dissolution rate and eventually oral bioavailability. Ternary phase diagrams were constructed on basis of solubility and emulsification studies. The composition of ATC-SNEDDS was optimised using the Box-Behnken optimisation design. Optimised ATC-SNEDDS was characterised for various physicochemical properties. Pharmacokinetic, pharmacodynamic and histological findings were performed in rats. Optimised ATC-SNEDDS resulted in droplets size of 5.66 nm, zeta potential of -19.52 mV, t 90 of 5.43 min and completely released ATC within 30 min irrespective of pH of the medium. Area under the curve of optimised ATC-SNEDDS in rats was 2.34-folds higher than ATC suspension. Pharmacodynamic studies revealed significant reduction in serum lipids of rats with fatty liver. Photomicrographs showed improvement in hepatocytes structure. In this study, we confirmed that ATC-SNEDDS would be a promising approach for improving oral bioavailability of ATC.

Load optimised piezoelectric generator for powering battery-less TPMS

NASA Astrophysics Data System (ADS)

Blažević, D.; Kamenar, E.; Zelenika, S.

2013-05-01

The design of a piezoelectric device aimed at harvesting the kinetic energy of random vibrations on a vehicle's wheel is presented. The harvester is optimised for powering a Tire Pressure Monitoring System (TPMS). On-road experiments are performed in order to measure the frequencies and amplitudes of wheels' vibrations. It is hence determined that the highest amplitudes occur in an unperiodic manner. Initial tests of the battery-less TPMS are performed in laboratory conditions where tuning and system set-up optimization is achieved. The energy obtained from the piezoelectric bimorph is managed by employing the control electronics which converts AC voltage to DC and conditions the output voltage to make it compatible with the load (i.e. sensor electronics and transmitter). The control electronics also manages the sleep/measure/transmit cycles so that the harvested energy is efficiently used. The system is finally tested in real on-road conditions successfully powering the pressure sensor and transmitting the data to a receiver in the car cockpit.

Application of particle swarm optimisation for solving deteriorating inventory model with fluctuating demand and controllable deterioration rate

NASA Astrophysics Data System (ADS)

Chen, Yu-Ren; Dye, Chung-Yuan

2013-06-01

In most of the inventory models in the literature, the deterioration rate of goods is viewed as an exogenous variable, which is not subject to control. In the real market, the retailer can reduce the deterioration rate of product by making effective capital investment in storehouse equipments. In this study, we formulate a deteriorating inventory model with time-varying demand by allowing preservation technology cost as a decision variable in conjunction with replacement policy. The objective is to find the optimal replenishment and preservation technology investment strategies while minimising the total cost over the planning horizon. For any given feasible replenishment scheme, we first prove that the optimal preservation technology investment strategy not only exists but is also unique. Then, a particle swarm optimisation is coded and used to solve the nonlinear programming problem by employing the properties derived from this article. Some numerical examples are used to illustrate the features of the proposed model.

Preparation and evaluation of a controlled drug release of repaglinide through matrix pellets: in vitro and in vivo studies.

PubMed

Tavakoli, Naser; Minaiyan, Mohsen; Tabbakhian, Majid; Pendar, Yaqub

2014-01-01

Repaglinide, an oral antidiabetic agent, has a rapid onset of action and short half-life of approximately 1 h. Designing a controlled release dosage form of the drug is required to maintain its therapeutic blood level and to eliminate its adverse effects, particularly the hypoglycaemia. Repaglinide sustained release matrix pellets consisting of Avicel, lactose and different polymers were prepared using extrusion-spheronisation method. The effect of different formulation components on in vitro drug release were evaluated using USP apparatus (paddle) for 12 h in phosphate buffer. The optimised formulation was orally administrated to normal and STZ induced diabetic rats. Most pellet formulations had acceptable physical properties with regard to size distribution, flowability and friability. Repaglinide pellets comprising Avicel 50%, lactose 47% and SLS 1% were released 94% of its drug content after 12 h. The optimised formulation was able to decrease blood glucose level in normal rats and those with diabetes throughout 8-12 h.

Entwicklung von umwelt- und naturschutzgerechten Verfahren der landwirtschaftlichen Landnutzung für das Biosphärenreservat Schorfheide-Chorin

NASA Astrophysics Data System (ADS)

Meyer-Aurich, Andreas

1999-11-01

Mit der vorliegenden Arbeit werden exemplarisch Chancen und Grenzen der Integration von Umwelt- und Naturschutz in Verfahren der ackerbaulichen Landnutzung aufgezeigt. Die Umsetzung von Zielen des Umwelt- und Naturschutzes in Verfahren der Landnutzung ist mit verschiedenen Schwierigkeiten verbunden. Diese liegen zum einen in der Konkretisierung der Ziele, um diese umsetzen zu können, zum anderen in vielfach unzulänglichem Wissen über den Zusammenhang zwischen unterschiedlichen Formen der Landnutzung und insbesondere den biotischen Naturschutzzielen. Zunächst wird die Problematik der Zielfestlegung und Konkretisierung erörtert. Das Umweltqualitätszielkonzept von Fürst et al. (1992) stellt einen Versuch dar, Ziele des Umwelt- und Naturschutzes zu konkretisieren. Dieses Konzept haben Heidt et al. (1997) auf einen Landschaftsausschnitt von ca. 6000 ha im Biosphärenreservat Schorfheide-Chorin im Nordosten Brandenburgs angewendet. Eine Auswahl der von Heidt et al. (1997) formulierten Umweltqualitätsziele bildet die Basis dieser Arbeit. Für die ausgewählten Umweltqualitätsziele wurden wesentliche Einflussfaktoren der Landnutzung identifiziert und ein Bewertungssystem entwickelt, mit dem die Auswirkungen von landwirtschaftlichen Anbauverfahren auf diese Umweltqualitätsziele abgebildet werden können. Die praktizierte Landnutzung von 20 Betrieben im Biosphärenreservat Schorfheide-Chorin wurde von 1994 bis 1997 hinsichtlich ihrer Auswirkungen auf die Umweltqualitätsziele analysiert. Die Analyse ergab ein sehr differenziertes Bild, das zum Teil Unterschiede in der Auswirkung auf die Umweltqualitätsziele für den Anbau einzelner Kulturen oder für bestimmte Betriebstypen zeigte. Es zeigte sich aber auch, dass es bei der Gestaltung des Anbaus einzelner Kulturarten große Unterschiede gab, die für Umweltqualitätsziele Bedeutung haben. Neben der Analyse der Landnutzung im Biosphärenreservat Schorfheide-Chorin wurde ein System entwickelt, mit dem die modellhafte Abbildung von Verfahren der Landnutzung möglich ist. Die Modellverfahren wurden in eine umfangreiche Datenbank eingebunden. Sie wurden mit Hilfe eines Fuzzy- Regelsystems hinsichtlich ihrer Auswirkungen auf die Umweltqualitätsziele bewertet. Die systematisch bewerteten Verfahren wurden in ein Betriebsmodell integriert, womit eine weitergehende Analyse der Zielbeziehungen und die Berechnung von Szenarien mit unterschiedlichen Rahmenbedingungen ermöglicht wurde. Die Analyse der Beziehung verschiedener Ziele zueinander (Zieldivergenz, Zielkonvergenz) zeigte, dass sich mit der Verfolgung vieler Umweltqualitätsziele auch positive Effekte für andere Umweltqualitätsziele ergaben. Teilweise konnte allerdings auch eine Zieldivergenz festgestellt werden, die auf mögliche Zielkonflikte hinweist. Bei der Analyse der Szenarienergebnisse zeigte sich, dass die vorgeschlagenen Veränderungen von Rahmenbedingungen vielfach eine Verschlechterung für verschiedene Umweltqualitätsziele mit sich bringen. Eine Ursache dafür liegt darin, dass bei der Definition der Szenarien die Bedeutung der Stilllegungen unterschätzt wurde. The objective of this research was to show the opportunities and limitations associated with integrating of environmental goals into agricultural land use management. For this purpose, the impact of agricultural land uses on six environmental quality goals was analysed for an approximately 16.000 ha study region within the biosphere reserve Schorfheide-Chorin in north-eastern Brandenburg (Germany). The environmental quality goals considered were protection of ground water, preservation of groundwater recharge, protection of the soil against wind and water erosion and preservation of animal species typical of the agricultural landscape, in particular partridge, amphibians and cranes. For each environmental quality goal, an evaluation framework is presented which enables an assessment of the impact of agricultural land uses on the environmental quality goals. The evaluation framework was applied to assess the impact of land uses of twenty farms in the study area from 1994 to 1997. It was demonstrated that the impact of agricultural land uses on the environmental quality of the region is very complex, and - although some crops did significantly impact certain aspects, one factor did not overwhelmingly contribute to the overall environmental quality. The evaluation framework was integrated further into a system of modelled cropping practices for optimisation calculations. For this purpose, a model framework was established based on a MS Access database. In the database, cropping practices for 17 crops are stored. Inputs and yields are adapted to the site-specific yield potential. In addition to the cropping practices, the model framework is comprised of an evaluation module and optimisation module. Hence, the impact of the cropping practices can be assessed for each site. This model framework provides the basis for optimisation calculations to forecast various land uses under different conditions. A step-wise integration of the environmental quality goals into the optimisation algorithm of a model farm allows for showing trade-offs between economic and ecological goals. The results of the trade-offs show that an improvement of ecological goal achievement is possible with little impact on the gross margin, as long as the improvement is less than 30% of the starting situation. If improvements greater than 30% are desired, very high losses of gross margin must be taken into consideration. Another result of the calculations shows that high achievements of environmental quality goals often correlate with the percentage of set-aside land within the total area.

Results of a Multicenter, Randomized, Double-Masked, Placebo-Controlled Clinical Study of the Efficacy and Safety of Visomitin Eye Drops in Patients with Dry Eye Syndrome.

PubMed

Brzheskiy, Vladimir V; Efimova, Elena L; Vorontsova, Tatiana N; Alekseev, Vladimir N; Gusarevich, Olga G; Shaidurova, Ksenia N; Ryabtseva, Alla A; Andryukhina, Olga M; Kamenskikh, Tatiana G; Sumarokova, Elena S; Miljudin, Eugeny S; Egorov, Eugeny A; Lebedev, Oleg I; Surov, Alexander V; Korol, Andrii R; Nasinnyk, Illia O; Bezditko, Pavel A; Muzhychuk, Olena P; Vygodin, Vladimir A; Yani, Elena V; Savchenko, Alla Y; Karger, Elena M; Fedorkin, Oleg N; Mironov, Alexander N; Ostapenko, Victoria; Popeko, Natalia A; Skulachev, Vladimir P; Skulachev, Maxim V

2015-12-01

This article presents the results of an international, multicenter, randomized, double-masked, placebo-controlled clinical study of Visomitin (Mitotech LLC, Moscow, Russian Federation) eye drops in patients with dry eye syndrome (DES). Visomitin is the first registered (in Russia) drug with a mitochondria-targeted antioxidant (SkQ1) as the active ingredient. In this multicenter (10 sites) study of 240 subjects with DES, study drug (Visomitin or placebo) was self-administered three times daily (TID) for 6 weeks, followed by a 6-week follow-up period. Seven in-office study visits occurred every 2 weeks during both the treatment and follow-up periods. Efficacy measures included Schirmer's test, tear break-up time, fluorescein staining, meniscus height, and visual acuity. Safety measures included adverse events, slit lamp biomicroscopy, tonometry, blood pressure, and heart rate. Tolerability was also evaluated. This clinical study showed the effectiveness of Visomitin eye drops in the treatment of signs and symptoms of DES compared with placebo. The study showed that a 6-week course of TID topical instillation of Visomitin significantly improved the functional state of the cornea; Visomitin increased tear film stability and reduced corneal damage. Significant reduction of dry eye symptoms (such as dryness, burning, grittiness, and blurred vision) was also observed. Based on the results of this study, Visomitin is effective and safe for use in eye patients with DES for protection from corneal damage. Mitotech LLC.

Development and validation of a quantitative competitive ELISA for potency testing of equine anti rabies sera with other potential use.

PubMed

Korimbocus, Jehanara; Dehay, Nicolas; Tordo, Noël; Cano, François; Morgeaux, Sylvie

2016-06-14

In case of a bite by a rabies infected animal, the World Health Organisation recommends a prophylactic treatment including the administration of Human Rabies Immunoglobulins (HRIGs) or highly purified F(ab')2 fragments produced from Equine Rabies Immunoglobulin (F(ab')2 - ERIGs). According to international regulation, quality control of F(ab')2 - ERIGs lots requires potency testing by the in vivo Mouse Neutralisation Test (MNT) prior marketing. However, the strategy of the 3Rs (Reduce, Refine, Replace) for animal testing required by the European Directive encourages the replacement of the in vivo potency test by an in vitro assay. In this context, a competitive ELISA method (c-ELISA) has been developed by the Agence Nationale de Sécurité du Médicament et des Produits de Santé where F(ab')2 - ERIGs are in competition with a monoclonal antibody recognizing the trimeric native form of the rabies glycoprotein. After a full validation study, the c-ELISA has been applied to commercial batches of F(ab')2 - ERIGs. A correlation study with the MNT demonstrated a similarity between the two methods (r=0.751). Moreover, the c-ELISA method which does not need any species specific reagent has been applied to HRIGs potency testing as an alternative method to Rapid Fluorescent Focus Inhibition Test (RFFIT), thus avoiding the handling of live rabies virus in BSL3 containment. In conclusion, the c-ELISA has shown its potential to replace MNT and possibly RFFIT for the quantification of rabies immunoglobulin. After optimisation it may be used for the quantification of rabies immunoglobulin in any animal species, notably for rabies immunogenicity assay in mice. Copyright © 2016 Elsevier Ltd. All rights reserved.

Application of Three Existing Stope Boundary Optimisation Methods in an Operating Underground Mine

NASA Astrophysics Data System (ADS)

Erdogan, Gamze; Yavuz, Mahmut

2017-12-01

The underground mine planning and design optimisation process have received little attention because of complexity and variability of problems in underground mines. Although a number of optimisation studies and software tools are available and some of them, in special, have been implemented effectively to determine the ultimate-pit limits in an open pit mine, there is still a lack of studies for optimisation of ultimate stope boundaries in underground mines. The proposed approaches for this purpose aim at maximizing the economic profit by selecting the best possible layout under operational, technical and physical constraints. In this paper, the existing three heuristic techniques including Floating Stope Algorithm, Maximum Value Algorithm and Mineable Shape Optimiser (MSO) are examined for optimisation of stope layout in a case study. Each technique is assessed in terms of applicability, algorithm capabilities and limitations considering the underground mine planning challenges. Finally, the results are evaluated and compared.

Design Optimisation of a Magnetic Field Based Soft Tactile Sensor

PubMed Central

Raske, Nicholas; Kow, Junwai; Alazmani, Ali; Ghajari, Mazdak; Culmer, Peter; Hewson, Robert

2017-01-01

This paper investigates the design optimisation of a magnetic field based soft tactile sensor, comprised of a magnet and Hall effect module separated by an elastomer. The aim was to minimise sensitivity of the output force with respect to the input magnetic field; this was achieved by varying the geometry and material properties. Finite element simulations determined the magnetic field and structural behaviour under load. Genetic programming produced phenomenological expressions describing these responses. Optimisation studies constrained by a measurable force and stable loading conditions were conducted; these produced Pareto sets of designs from which the optimal sensor characteristics were selected. The optimisation demonstrated a compromise between sensitivity and the measurable force, a fabricated version of the optimised sensor validated the improvements made using this methodology. The approach presented can be applied in general for optimising soft tactile sensor designs over a range of applications and sensing modes. PMID:29099787

Optimisation de fonctionnements de pompe à chaleur chimique : synchronisation et commande du procédé

NASA Astrophysics Data System (ADS)

Cassou, T.; Amouroux, M.; Labat, P.

1995-04-01

We present the mathematical modelling of a chemical heat pump and the associated simulator. This simulator is able to determine the influence of different parameters (which would be associated to the heat exchanges or to the chemical kinetics), but also to simulate the main operating modes. An optimal management of process represents the objective to reach; we materialize it by a continuous and steady production of the power delivered by the machine. Nous présentons le modèle mathématique d'un pilote de pompe à chaleur chimique et le simulateur numérique correspondant. Ce simulateur est capable de déterminer l'influence de divers paramètres (qu'ils soient liés aux échanges de chaleur ou à la cinétique chimique), mais aussi de simuler les principaux modes de fonctionnement. Une gestion optimale du procédé représente le but à atteindre: une conduite optimisée du système permet, par une gestion des différentes phases, une production continue et stable de la puissance délivrée par la machine.

Electroproduction Exclusive des Mesons f0(980) et f2(1270) sur le Proton a JLab avec le Detecteur CLAS (in English; French)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Garillon, Brice

We present in this report our results for the exclusive electroproduction of f0(980) and f2(1270) off the proton. The data were taken during the e1-6 experiment (2001-2002) with the CLAS detector of Jff?erson Laboratory, using a 5.754 GeV beam and a liquid hydrogen target. We have measured for the first time the reduced differential cross sections for these two processes, in the kinematical region 1:5 < Q2 < 4:33 GeV2 and 0:15 < xB < 0:55. We propose an interpretation of our results according to a Regge-based model. An alternative analysis of the data in terms of partial waves amplitudesmore » as well as in terms of moments of the decay angular distributions has also been attempted. Finally, we have performed the calibration of the photomultipliers of the Central Neutron Detector (CND), to be installed in the CLAS12 detector. The CND has been optimised for the study of the n-DVCS process (Deeply Virtual Compton Scattering off the neutron).« less

Phenotypic and biochemical profile changes in calendula (Calendula officinalis L.) plants treated with two chemical mutagenesis.

PubMed

El-Nashar, Y I; Asrar, A A

2016-05-06

Chemical mutagenesis is an efficient tool used in mutation-breeding programs to improve the vital characters of the floricultural crops. This study aimed to estimate the effects of different concentrations of two chemical mutagens; sodium azide (SA) and diethyl sulfate (DES). The vegetative growth and flowering characteristics in two generations (M1 and M2) of calendula plants were investigated. Seeds were treated with five different concentrations of SA and DES (at the same rates) of 1000, 2000, 3000, 4000, and 5000 ppm, in addition to a control treatment of 0 ppm. Results showed that lower concentrations of SA mutagen had significant effects on seed germination percentage, plant height, leaf area, plant fresh weight, flowering date, inflorescence diameter, and gas-exchange measurements in plants of both generations. Calendula plants tended to flower earlier under low mutagen concentrations (1000 ppm), whereas higher concentrations delayed flowering significantly. Positive results on seed germination, plant height, number of branches, plant fresh weight, and leaf area were observed in the M2-generation at lower concentrations of SA (1000 ppm), as well as at 4000 ppm DES on number of leaves and inflorescences. The highest total soluble protein was detected at the concentrations of 1000 ppm SA and 2000 ppm DES. DES showed higher average of acid phosphatase activity than SA. Results indicated that lower concentrations of SA and DES mutagens had positive effects on seed germination percentage, plant height, leaf area, plant fresh weight, flowering date, inflorescence diameter, and gas-exchange measurements. Thus, lower mutagen concentrations could be recommended for better floral and physio-chemical performance.

Small RNAs as important regulators for the hybrid vigour of super-hybrid rice.

PubMed

Zhang, Lei; Peng, Yonggang; Wei, Xiaoli; Dai, Yan; Yuan, Dawei; Lu, Yufei; Pan, Yangyang; Zhu, Zhen

2014-11-01

Heterosis is an important biological phenomenon; however, the role of small RNA (sRNA) in heterosis of hybrid rice remains poorly described. Here, we performed sRNA profiling of F1 super-hybrid rice LYP9 and its parents using high-throughput sequencing technology, and identified 355 distinct mature microRNAs and trans-acting small interfering RNAs, 69 of which were differentially expressed sRNAs (DES) between the hybrid and the mid-parental value. Among these, 34 DES were predicted to target 176 transcripts, of which 112 encoded 94 transcription factors. Further analysis showed that 67.6% of DES expression levels were negatively correlated with their target mRNAs either in flag leaves or panicles. The target genes of DES were significantly enriched in some important biological processes, including the auxin signalling pathway, in which existed a regulatory network mediated by DES and their targets, closely associated with plant growth and development. Overall, 20.8% of DES and their target genes were significantly enriched in quantitative trait loci of small intervals related to important rice agronomic traits including growth vigour, grain yield, and plant architecture, suggesting that the interaction between sRNAs and their targets contributes to the heterotic phenotypes of hybrid rice. Our findings revealed that sRNAs might play important roles in hybrid vigour of super-hybrid rice by regulating their target genes, especially in controlling the auxin signalling pathway. The above finding provides a novel insight into the molecular mechanism of heterosis. © The Author 2014. Published by Oxford University Press on behalf of the Society for Experimental Biology.

CABG Surgery Remains the best Option for Patients with Left Main Coronary Disease in Comparison with PCI-DES: Meta-Analysis of Randomized Controlled Trials

PubMed Central

Sá, Michel Pompeu Barros Oliveira; Soares, Artur Freire; Miranda, Rodrigo Gusmão Albuquerque; Araújo, Mayara Lopes; Menezes, Alexandre Motta; Silva, Frederico Pires Vasconcelos; Lima, Ricardo Carvalho

2017-01-01

Objective To compare the safety and efficacy of coronary artery bypass grafting (CABG) with percutaneous coronary intervention (PCI) using drug-eluting stents (DES) in patients with unprotected left main coronary artery (ULMCA) disease. Methods MEDLINE, EMBASE, CENTRAL/CCTR, SciELO, LILACS, Google Scholar and reference lists of relevant articles were searched for clinical studies that reported outcomes at 1-year follow-up after PCI with DES and CABG for the treatment of ULMCA stenosis. Five studies fulfilled our eligibility criteria and they included a total of 4.595 patients (2.298 for CABG and 2.297 for PCI with DES). Results At 1-year follow-up, there was no significant difference between CABG and DES groups concerning the risk for death (risk ratio [RR] 0.973, P=0.830), myocardial infarction (RR 0.694, P=0.148), stroke (RR 1.224, P=0.598), and major adverse cerebrovascular and cardiovascular events (RR 0.948, P=0.680). The risk for target vessel revascularization (TVR) was significantly lower in the CABG group compared to the DES group (RR 0.583, P<0.001). It was observed no publication bias regarding the outcomes, but only the outcome TVR was free from substantial statistical heterogeneity of the effects. In the meta-regression, there was evidence that the factor "female gender" modulated the effect regarding myocardial infarction rates, favoring the CABG strategy. Conclusion CABG surgery remains the best option of treatment for patients with ULMCA disease, with lower TVR rates. PMID:29211222

A Cluster-Randomised, Controlled Trial of the Impact of Cogmed Working Memory Training on Both Academic Performance and Regulation of Social, Emotional and Behavioural Challenges

ERIC Educational Resources Information Center

Hitchcock, Caitlin; Westwell, Martin S.

2017-01-01

Background: We explored whether school-based Cogmed Working Memory Training (CWMT) may optimise both academic and psychological outcomes at school. Training of executive control skills may form a novel approach to enhancing processes that predict academic achievement, such as task-related attention, and thereby academic performance, but also has…

A direct comparison of efficacy between desloratadine and rupatadine in seasonal allergic rhinoconjunctivitis: a randomized, double-blind, placebo-controlled study.

PubMed

Lukat, Kf; Rivas, P; Roger, A; Kowalski, Ml; Botzen, U; Wessel, F; Sanquer, F; Agache, I; Izquierdo, I

2013-01-01

H1-antihistamines are recommended as the first-line symptomatic treatment of allergic rhinitis. The objective of this study was to evaluate the effects of rupatadine (RUP) versus desloratadine (DES) in subjects with seasonal allergic rhinitis (SAR). To assess the efficacy and safety of RUP in SAR in comparison with placebo (PL) and DES. A randomized, double-blind, multicenter, international, and PL-controlled study was carried out. The main selection criteria included SAR patients over 12 years old with a positive prick test to a relevant seasonal allergen for the geographic area. Symptomatic patients at screening with a nasal symptom sum score of ≥6 points (nasal discharge, nasal obstruction, sneezing, and nasal pruritus), a non-nasal score of ≥3 points (ocular pruritus, ocular redness, and tearing eyes), and a rhinorrhea score of ≥2 points with laboratory test results and electrocardiography within acceptable limits were included in the study. Change from baseline in the total symptom-score (T7SS) over the 4-week treatment period (reflective evaluation) was considered the primary efficacy variable. Secondary efficacy measures included total nasal symptom score (T4NSS) and conjunctival symptom score (T3NNSS), both of which are reflective and instantaneous evaluations. Furthermore questions related to quality of life (eg, sleep disturbances or impairment of daily activities) have also been evaluated. Safety was assessed according to adverse events reported, as well as laboratory and electrocardiography controls. A total of 379 patients were randomized, of which 356 were included and allocated to PL (n = 122), RUP (n = 117), or DES (n = 117). Mean change of T7SS over the 4-week treatment period was significantly reduced in the RUP (-46.1%, P = 0.03) and DES (-48.9%, P = 0.01) groups, compared with PL. Similarly, RUP and DES were comparable and significantly superior to PL for all secondary endpoints, including nasal and conjunctival symptoms and patients' and investigator's overall clinical opinions. Symptom score evaluation (both reflective and instantaneous evaluations) throughout the treatment period showed a progressive and maintained significant improvement with both treatments at day 7 (P = 0.01), day 14 (P = 0.007), and day 21 (P = 0.01) in comparison with PL. Adverse events were scarce and were similar in both treatment groups. Electrocardiography (QTc) and lab test results did not show any relevant findings. RUP is a very good choice for SAR due to its contribution to the improvement of nasal (including obstruction) and non-nasal symptoms to a similar degree as DES.

BluePyOpt: Leveraging Open Source Software and Cloud Infrastructure to Optimise Model Parameters in Neuroscience

PubMed Central

Van Geit, Werner; Gevaert, Michael; Chindemi, Giuseppe; Rössert, Christian; Courcol, Jean-Denis; Muller, Eilif B.; Schürmann, Felix; Segev, Idan; Markram, Henry

2016-01-01

At many scales in neuroscience, appropriate mathematical models take the form of complex dynamical systems. Parameterizing such models to conform to the multitude of available experimental constraints is a global non-linear optimisation problem with a complex fitness landscape, requiring numerical techniques to find suitable approximate solutions. Stochastic optimisation approaches, such as evolutionary algorithms, have been shown to be effective, but often the setting up of such optimisations and the choice of a specific search algorithm and its parameters is non-trivial, requiring domain-specific expertise. Here we describe BluePyOpt, a Python package targeted at the broad neuroscience community to simplify this task. BluePyOpt is an extensible framework for data-driven model parameter optimisation that wraps and standardizes several existing open-source tools. It simplifies the task of creating and sharing these optimisations, and the associated techniques and knowledge. This is achieved by abstracting the optimisation and evaluation tasks into various reusable and flexible discrete elements according to established best-practices. Further, BluePyOpt provides methods for setting up both small- and large-scale optimisations on a variety of platforms, ranging from laptops to Linux clusters and cloud-based compute infrastructures. The versatility of the BluePyOpt framework is demonstrated by working through three representative neuroscience specific use cases. PMID:27375471

Rotational degree-of-freedom synthesis: An optimised finite difference method for non-exact data

NASA Astrophysics Data System (ADS)

Gibbons, T. J.; Öztürk, E.; Sims, N. D.

2018-01-01

Measuring the rotational dynamic behaviour of a structure is important for many areas of dynamics such as passive vibration control, acoustics, and model updating. Specialist and dedicated equipment is often needed, unless the rotational degree-of-freedom is synthesised based upon translational data. However, this involves numerically differentiating the translational mode shapes to approximate the rotational modes, for example using a finite difference algorithm. A key challenge with this approach is choosing the measurement spacing between the data points, an issue which has often been overlooked in the published literature. The present contribution will for the first time prove that the use of a finite difference approach can be unstable when using non-exact measured data and a small measurement spacing, for beam-like structures. Then, a generalised analytical error analysis is used to propose an optimised measurement spacing, which balances the numerical error of the finite difference equation with the propagation error from the perturbed data. The approach is demonstrated using both numerical and experimental investigations. It is shown that by obtaining a small number of test measurements it is possible to optimise the measurement accuracy, without any further assumptions on the boundary conditions of the structure.

A radiobiology-based inverse treatment planning method for optimisation of permanent l-125 prostate implants in focal brachytherapy.

PubMed

Haworth, Annette; Mears, Christopher; Betts, John M; Reynolds, Hayley M; Tack, Guido; Leo, Kevin; Williams, Scott; Ebert, Martin A

2016-01-07

Treatment plans for ten patients, initially treated with a conventional approach to low dose-rate brachytherapy (LDR, 145 Gy to entire prostate), were compared with plans for the same patients created with an inverse-optimisation planning process utilising a biologically-based objective. The 'biological optimisation' considered a non-uniform distribution of tumour cell density through the prostate based on known and expected locations of the tumour. Using dose planning-objectives derived from our previous biological-model validation study, the volume of the urethra receiving 125% of the conventional prescription (145 Gy) was reduced from a median value of 64% to less than 8% whilst maintaining high values of TCP. On average, the number of planned seeds was reduced from 85 to less than 75. The robustness of plans to random seed displacements needs to be carefully considered when using contemporary seed placement techniques. We conclude that an inverse planning approach to LDR treatments, based on a biological objective, has the potential to maintain high rates of tumour control whilst minimising dose to healthy tissue. In future, the radiobiological model will be informed using multi-parametric MRI to provide a personalised medicine approach.

Ontology-based coupled optimisation design method using state-space analysis for the spindle box system of large ultra-precision optical grinding machine

NASA Astrophysics Data System (ADS)

Wang, Qianren; Chen, Xing; Yin, Yuehong; Lu, Jian

2017-08-01

With the increasing complexity of mechatronic products, traditional empirical or step-by-step design methods are facing great challenges with various factors and different stages having become inevitably coupled during the design process. Management of massive information or big data, as well as the efficient operation of information flow, is deeply involved in the process of coupled design. Designers have to address increased sophisticated situations when coupled optimisation is also engaged. Aiming at overcoming these difficulties involved in conducting the design of the spindle box system of ultra-precision optical grinding machine, this paper proposed a coupled optimisation design method based on state-space analysis, with the design knowledge represented by ontologies and their semantic networks. An electromechanical coupled model integrating mechanical structure, control system and driving system of the motor is established, mainly concerning the stiffness matrix of hydrostatic bearings, ball screw nut and rolling guide sliders. The effectiveness and precision of the method are validated by the simulation results of the natural frequency and deformation of the spindle box when applying an impact force to the grinding wheel.

Formulation of multiparticulate systems as lyophilised orally disintegrating tablets.

PubMed

Alhusban, Farhan; Perrie, Yvonne; Mohammed, Afzal R

2011-11-01

The current study aimed to exploit the electrostatic associative interaction between carrageenan and gelatin to optimise a formulation of lyophilised orally disintegrating tablets (ODTs) suitable for multiparticulate delivery. A central composite face centred (CCF) design was applied to study the influence of formulation variables (gelatin, carrageenan and alanine concentrations) on the crucial responses of the formulation (disintegration time, hardness, viscosity and pH). The disintegration time and viscosity were controlled by the associative interaction between gelatin and carrageenan upon hydration which forms a strong complex that increases the viscosity of the stock solution and forms tablet with higher resistant to disintegration in aqueous medium. Therefore, the levels of carrageenan, gelatin and their interaction in the formulation were the significant factors. In terms of hardness, increasing gelatin and alanine concentration was the most effective way to improve tablet hardness. Accordingly, optimum concentrations of these excipients were needed to find the best balance that fulfilled all formulation requirements. The revised model showed high degree of predictability and optimisation reliability and therefore was successful in developing an ODT formulation with optimised properties that were able deliver enteric coated multiparticulates of omeprazole without compromising their functionality. Copyright © 2011 Elsevier B.V. All rights reserved.

The optimisation of the laser-induced forward transfer process for fabrication of polyfluorene-based organic light-emitting diode pixels

NASA Astrophysics Data System (ADS)

Shaw-Stewart, James; Mattle, Thomas; Lippert, Thomas; Nagel, Matthias; Nüesch, Frank; Wokaun, Alexander

2013-08-01

Laser-induced forward transfer (LIFT) has already been used to fabricate various types of organic light-emitting diodes (OLEDs), and the process itself has been optimised and refined considerably since OLED pixels were first demonstrated. In particular, a dynamic release layer (DRL) of triazene polymer has been used, the environmental pressure has been reduced down to a medium vacuum, and the donor receiver gap has been controlled with the use of spacers. Insight into the LIFT process's effect upon OLED pixel performance is presented here, obtained through optimisation of three-colour polyfluorene-based OLEDs. A marked dependence of the pixel morphology quality on the cathode metal is observed, and the laser transfer fluence dependence is also analysed. The pixel device performances are compared to conventionally fabricated devices, and cathode effects have been looked at in detail. The silver cathode pixels show more heterogeneous pixel morphologies, and a correspondingly poorer efficiency characteristics. The aluminium cathode pixels have greater green electroluminescent emission than both the silver cathode pixels and the conventionally fabricated aluminium devices, and the green emission has a fluence dependence for silver cathode pixels.

Temperament and character traits in patients with conversion disorder and their relations with dissociation.

PubMed

Sarisoy, Gökhan; Kaçar, Ö Mer Faruk; Öztürk, Arif; Yilman, Tuba; Mor, Sema; Özturan, Deniz Deniz; Yazici, Neslihan; Gümüş, Kübra

2015-12-01

The purpose of this study was to investigate temperament and character traits in patients with conversion disorder and the relation of these traits with dissociative symptoms. Sixty patients (60) diagnosed with conversion disorder according to DSM-IV-TR and 60 healthy volunteers were included in the study. All participants' temperament and character traits were determined using Cloninger's Temperament and Character Inventory (TCI). Patients with conversion disorder were divided into two subgroups using the Dissociative Experiences Scale (DES), dissociative (n=30, 50%) and non-dissociative (n=30, 50%). The two conversion disorder subgroups were compared with the control group in terms of temperament and character traits. Correlation analysis was also performed between TCI and DES scores in the entire conversion group. Novelty seeking (NS) scores were lower in both the dissociative and non-dissociative groups compared to the control group. Harm avoidance (HA) scores were higher in the dissociative group than in the control group. Reward dependence (RD) scores were lower in the dissociative group than in the non-dissociative and control group. Self-directedness (SD) scores were lower in the dissociative group than in the control group. Self-transcendence (ST) scores were higher in the dissociative group than in the non-dissociative group. DES scores were negatively correlated with RD and SD scores in the entire conversion group and positively correlated with ST scores. Low NS temperament traits may be associated with conversion disorder. High HA and low RD temperament traits and low SD and high ST character traits may be associated with pathological dissociation in patients with conversion disorder.

Sécurité au-delà des mythes et des croyances [Security beyond myths and beliefs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Koch, Stephane

2010-06-24

Présentation orale en français, support visuel en français et en anglais. La pire des failles de sécurité est l'impression de sécurité. Le décalage entre la compréhension que l’on a des technologies utilisées, et leurs potentiels réels, ainsi que l'impact potentiellement négatif qu'elles peuvent avoir sur nos vies, n'est pas toujours compris, ou pris en compte par la plupart d'entre-nous. On se contente de nos perceptions pour ne pas avoir à se confronter à la réalité... Alors qu'en est-il vraiment ? En matière de sécurité qui de l'humain ou des technologies a le contrôle ? [Oral presentation in French, visual supportmore » in French and English. The worst security breach and the impression of security. The gap between our understanding of the technologies used, and their actual potentials, as well as the potentially negative impact they may have on our lives, is not always understood, or taken into account by most of us. We are content with our perceptions to avoid having to confront the reality ... So what is it really? In terms of security is it humans or technology which has control?]« less

The in vitro effect of nonylphenol, propranolol, and diethylstilbestrol on quality parameters and oxidative stress in sterlet (Acipenser ruthenus) spermatozoa.

PubMed

Shaliutina, Olena; Shaliutina-Kolešová, Anna; Lebeda, Ievgen; Rodina, Marek; Gazo, Ievgeniia

2017-09-01

The sturgeon is a highly endangered fish mostly due to over-fishing, habitat destruction, and water pollution. Nonylphenol (NP), propranolol (PN), and diethylstilbestrol (DES) are multifunctional xenobiotic compounds used in a variety of commercial and industrial products. The mechanism by which these xenobiotic compounds interfere with fish reproduction is not fully elucidated. This study assessed the effect of NP, PN, and DES on motility parameters, membrane integrity, and oxidative/antioxidant status in sterlet Acispenser ruthenus spermatozoa. Spermatozoa were incubated with several concentrations of target substances for 1h. Motility rate and velocity of spermatozoa decreased in the presence of xenobiotics in a dose-dependent manner compared with controls. A significant decrease in membrane integrity was recorded with exposure to 5μM of NP, 25μM of PN, and 50μM of DES. After 1h exposure at higher tested concentrations NP (5-25μM), PN (25-100μM), and DES (50-200μM), oxidative stress was apparent, as reflected by significantly higher levels of protein and lipid oxidation and significantly greater superoxide dismutase activity. The results demonstrated that NP, PN, and DES can induce reactive oxygen species stress in fish spermatozoa, which could impair sperm quality and the antioxidant defence system and decrease the percentage of intact sperm cells. Copyright © 2017 Elsevier Ltd. All rights reserved.

External adjustment sensitivity analysis for unmeasured confounding: an application to coronary stent outcomes, Pennsylvania 2004-2008.

PubMed

Huesch, Marco D

2013-06-01

Assessing the real-world comparative effectiveness of common interventions is challenged by unmeasured confounding. To determine whether the mortality benefit shown for drug-eluting stents (DES) over bare metal stents (BMS) in observational studies persists after controls for/tests for confounding. Retrospective observational study involving 38,019 patients, 65 years or older admitted for an index percutaneous coronary intervention receiving DES or BMS in Pennsylvania in 2004-2005 followed up for death through 3 years. Analysis was at the patient level. Mortality was analyzed with Cox proportional hazards models allowing for stratification by disease severity or DES use propensity, accounting for clustering of patients. Instrumental variables analysis used lagged physician stent usage to proxy for the focal stent type decision. A method originating in work by Cornfield and others in 1954 and popularized by Greenland in 1996 was used to assess robustness to confounding. DES was associated with a significantly lower adjusted risk of death at 3 years in Cox and in instrumented analyses. An implausibly strong hypothetical unobserved confounder would be required to fully explain these results. Confounding by indication can bias observational studies. No strong evidence of such selection biases was found in the reduced risk of death among elderly patients receiving DES instead of BMS in a Pennsylvanian state-wide population. © Health Research and Educational Trust.

Aquatic therapy for boys with Duchenne muscular dystrophy (DMD): an external pilot randomised controlled trial.

PubMed

Hind, Daniel; Parkin, James; Whitworth, Victoria; Rex, Saleema; Young, Tracey; Hampson, Lisa; Sheehan, Jennie; Maguire, Chin; Cantrill, Hannah; Scott, Elaine; Epps, Heather; Main, Marion; Geary, Michelle; McMurchie, Heather; Pallant, Lindsey; Woods, Daniel; Freeman, Jennifer; Lee, Ellen; Eagle, Michelle; Willis, Tracey; Muntoni, Francesco; Baxter, Peter

2017-01-01

Standard treatment of Duchenne muscular dystrophy (DMD) includes regular physiotherapy. There are no data to show whether adding aquatic therapy (AT) to land-based exercises helps maintain motor function. We assessed the feasibility of recruiting and collecting data from boys with DMD in a parallel-group pilot randomised trial (primary objective), also assessing how intervention and trial procedures work. Ambulant boys with DMD aged 7-16 years established on steroids, with North Star Ambulatory Assessment (NSAA) score ≥8, who were able to complete a 10-m walk test without aids or assistance, were randomly allocated (1:1) to 6 months of either optimised land-based exercises 4 to 6 days/week, defined by local community physiotherapists, or the same 4 days/week plus AT 2 days/week. Those unable to commit to a programme, with >20% variation between NSAA scores 4 weeks apart, or contraindications to AT were excluded. The main outcome measures included feasibility of recruiting 40 participants in 6 months from six UK centres, clinical outcomes including NSAA, independent assessment of treatment optimisation, participant/therapist views on acceptability of intervention and research protocols, value of information (VoI) analysis and cost-impact analysis. Over 6 months, 348 boys were screened: most lived too far from centres or were enrolled in other trials; 12 (30% of the targets) were randomised to AT ( n  = 8) or control ( n  = 4). The mean change in NSAA at 6 months was -5.5 (SD 7.8) in the control arm and -2.8 (SD 4.1) in the AT arm. Harms included fatigue in two boys, pain in one. Physiotherapists and parents valued AT but believed it should be delivered in community settings. Randomisation was unattractive to families, who had already decided that AT was useful and who often preferred to enrol in drug studies. The AT prescription was considered to be optimised for three boys, with other boys given programmes that were too extensive and insufficiently focused. Recruitment was insufficient for VoI analysis. Neither a UK-based RCT of AT nor a twice weekly AT therapy delivered at tertiary centres is feasible. Our study will help in the optimisation of AT service provision and the design of future research. ISRCTN41002956.

Targeted flock/herd and individual ruminant treatment approaches.

PubMed

Kenyon, F; Jackson, F

2012-05-04

In Europe, most nematodoses are subclinical involving morbid rather than mortal effects and control is largely achieved using anthelmintics. In cattle, the genera most associated with sub-optimal performance are Ostertagia and Cooperia whereas in sheep and goats, subclinical losses are most often caused by Teladorsagia and Trichostrongylus. In some regions, at certain times, other species such as Nematodirus and Haemonchus also cause disease in sheep and goats. Unfortunately, anthelmintic resistance has now become an issue for European small ruminant producers. One of the key aims of the EU-funded PARASOL project was to identify low input and sustainable approaches to control nematode parasites in ruminants using refugia-based strategies. Two approaches to optimise anthelmintic treatments in sheep and cattle were studied; targeted treatments (TT) - whole-group treatments optimised on the basis of a marker of infection e.g. faecal egg count (FEC), and targeted selected treatment (TST) - treatments given to identified individuals to provide epidemiological and/or production benefits. A number of indicators for TT and TST were assessed to define parasitological and production-system specific indicators for treatment that best suited the regions where the PARASOL studies were conducted. These included liveweight gain, production efficiency, FEC, body condition score and diarrhoea score in small ruminants, and pepsinogen levels and Ostertagia bulk milk tank ELISA in cattle. The PARASOL studies confirmed the value of monitoring FEC as a means of targeting whole-flock treatments in small ruminants. In cattle, bulk milk tank ELISA and serum pepsinogen assays could be used retrospectively to determine the levels of exposure and hence, in the next season to optimise anthelmintic usage. TST approaches in sheep and goats examined production efficiency and liveweight gain as indicators for treatment and confirmed the value of this approach in maintaining performance and anthelmintic susceptibility in the predominant gastrointestinal nematodes. There is good evidence that the TST approach selected less heavily for the development of resistance in comparison to routine monthly treatments. Further research is required to optimise markers for TT and TST but it is also crucial to encourage producers/advisors to adapt these refugia-based strategies to maintain drug susceptible parasites in order to provide sustainable control. Copyright © 2011 Elsevier B.V. All rights reserved.

Proceedings of the Annual Symposium on Frequency Control (33rd) Held in Atlantic City, New Jersey on 30 May-1 June 1979

DTIC Science & Technology

1979-01-01

from the Bernoullis was Daniel Bernoulli’s n’est pas la meme dans tous les sens", Exercices addition of the acceleration term to the beam e- de Math...frequencies). improved during 1811-1816 by Germain and Lagrange and, finally, the correct derivation was produced 1852 G. Lame, "Leqons sur la ...de la re- tropic membranes and plates (low frequencies) sistance des solides et des solides d’egale by Euler, Jacques Bernoulli, Germin, Lagrange

Fissuration d'un composite a matrice ceramique dans une application de piece statique de turbine a gaz

NASA Astrophysics Data System (ADS)

Lebel, Larry

Une procedure experimentale a ete developpee pour caracteriser les mecanismes de deterioration et la durabilite de materiaux composites a matrice ceramique (CMC) dans une application de piece statique de turbine a gaz. Tandis que la plupart des essais de caracterisation publies sur les materiaux CMC ont ete realises sous des conditions de chargement controle, la presente recherche tente de reproduire la relaxation des contraintes qui se produit normalement dans une piece statique a haute temperature. Dans l'experience proposee, un echantillon planaire de forme haltere est chauffe de facon cyclique sur une de ses faces et refroidi sur l'autre, tout en etant contraint dans ses deplacements. La contrainte de flexion resultante au centre de l'echantillon, mesuree par une cellule de charge, correspond a la contrainte de flexion qui a ete prealablement predite au centre des panneaux d'une chambre a combustion generique. Un materiau CMC multicouche compose d'une matrice d'alumine poreuse et de fibres NextelMD 720 a ete utilise pour developper l'experience. Des essais de calibration ont d'abord ete realises en utilisant un systeme de chauffage par lampe infrarouge, atteignant jusqu'a 1160 °C a la surface de l'echantillon. Un systeme laser au CO2 a par la suite ete utilise pour realiser des essais de deterioration a haute puissance, atteignant en fin d'essai des temperatures de surface excedant la limite de 1200 °C du materiau et des differences de temperature a travers l'epaisseur de plus de 1000 °C. Sous la puissance de chauffage imposee a amplitude constante, l'accumulation de dommage a fait en sorte d'augmenter la temperature en surface et les gradients de temperature a travers le materiau. Une reduction de la contrainte dans le temps a ete observee a cause du fluage, de la fissuration et de la delamination du materiau sous la condition de confinement du deplacement, menant a une stabilisation du niveau de dommage a une certaine profondeur dependant de la contrainte thermique initiale. La procedure de caracterisation developpee s'avere etre un outil prometteur pour developper de nouveaux types de materiaux, de meme que pour comparer la durabilite de materiaux existants sous des conditions representatives de pieces statiques de turbine a gaz. None

Elaboration d'un plan de transition et de mise en oeuvre pour ameliorer la gestion de l'obsolescence dans une entreprise du secteur aeronautique =

NASA Astrophysics Data System (ADS)

Conrad, Heloise

L'evolution technologique des composants electroniques entraine des problemes de gestion de l'obsolescence dans le secteur aeronautique. Les systemes aeronautiques ont en effet des durees de vie nettement superieures aux composants qu'ils contiennent. Cette difference de duree de vie et les normes strictes propres a l'aeronautique obligent les constructeurs a mettre en place une gestion efficace de l'obsolescence pour eviter les couts supplementaires de maintenance et de retards. De plus, a cause des faibles volumes de production qu'ils representent, les constructeurs aeronautiques n'ont que peu de controle sur leur chaine d'approvisionnement. La litterature offre beaucoup d'etudes sur l'obsolescence, appliquees a l'aeronautique. Les auteurs recommandent de mettre en place des processus de gestion et de prevision de l'obsolescence, et de construire des relations de collaboration avec leurs fournisseurs, qui ont plus de visibilite sur la chaine d'approvisionnement. Cette recherche presente d'abord l'elaboration d'une liste de criteres de bonne gestion de l'obsolescence, ainsi que la creation d'une methode de generation de plan de transition et de mise en oeuvre de l'amelioration de la gestion et de la prevision de l'obsolescence pour un cas concret. La methode est creee pour un manufacturier aeronautique ne possedant pas de systemes de gestion proactive ou de prevision de l'obsolescence. La creation de la methode s'est faite en suivant la methodologie de la science de la conception, en impliquant les employes concernes par la gestion de l'obsolescence. La methode comporte douze (12) etapes, amenant au developpement du plan de transition et de mise en oeuvre. Pour applique la methode, divers entretiens individuels et de groupe ont ete realises. Ces entretiens ont aussi permis de lister les criteres de gestion et de prevision efficaces de l'obsolescence. Cette liste a ete comparee avec les criteres issus de la litterature. En respect des besoins enonces par les employes et des conseils d'un industriel expert en obsolescence des composants avioniques, le plan de transition et de mise en oeuvre cree se divise en trois (3) phases : 1) amelioration de la gestion de l'obsolescence, 2) amelioration de la prevision de l'obsolescence et 3) gestion des fournisseurs. Meme si le plan de transition n'a pas ete applique dans l'entreprise partenaire, la methode et le plan cree ont ete approuves par les employes et utilisateurs.

Optimisation of nano-silica modified self-compacting high-Volume fly ash mortar

NASA Astrophysics Data System (ADS)

Achara, Bitrus Emmanuel; Mohammed, Bashar S.; Fadhil Nuruddin, Muhd

2017-05-01

Evaluation of the effects of nano-silica amount and superplasticizer (SP) dosage on the compressive strength, porosity and slump flow on high-volume fly ash self-consolidating mortar was investigated. Multiobjective optimisation technique using Design-Expert software was applied to obtain solution based on desirability function that simultaneously optimises the variables and the responses. A desirability function of 0.811 gives the optimised solution. The experimental and predicted results showed minimal errors in all the measured responses.

L'Infection Nosocomiale en Reanimation des Brules

PubMed Central

Siah, S.; Belefqih, R.; Elouennass, M.; Fouadi, F.E.; Ihrai, I.

2009-01-01

Summary L'infection nosocomiale bactérienne étant l'une des principales causes de morbidité et de mortalité chez le brûlé, nous avons réalisé une étude rétrospective portant sur 84 patients hospitalisés au sein du service de réanimation des brûlés de l'Hôpital Militaire d'Instruction Mohammed V de Rabat, sur une période de 3 ans, du premier janvier 2001 au 31 décembre 2003. Les critères d'infection nosocomiale étaient ceux du Center for Disease Control d'Atlanta de 1988. Les taux d'incidence ont été calculés. La population infectée a été comparée à celle non infectée. L'écologie bactérienne du service a été décrite comme aussi l'antibiotype. Il ressort de cette étude la survenue de 87 infections nosocomiales chez 27 patients. L'incidence cumulative était de 103 infections pour 1000 jours de traitement. Pour ce qui est des caractéristiques des infections bactériennes, les sites infectés étaient la peau (77%), le sang (13,8%), les voies urinaires (8%) et les poumons (1,1%). Les principaux germes étaient: Staphylococcus sp. (33,3%), Pseudomonas aeruginosa (23%), Enterococcus faecalis et Acinetobacter (8%). Les staphylocoques étaient méticillo-résistants dans 22,2% des cas. Le Pseudomonas et l'Acinetobacter étaient multirésistants (60%). Dans notre étude les facteurs prédictifs de survenue des infections nosocomiales que nous avons retenus après l'étude comparative des populations infectées et non infectées ont été l'âge, le body mass index, l'abbreviated burn severity index et le remplissage initial. En isolant ces paramètres, nous avons pu établir une équation à valeur prédictive de survenue d'infection nosocomiale chez le patient brûlé. PMID:21991158

Desflurane inhalation before ischemia increases ischemia-reperfusion-induced vascular leakage in isolated rabbit lungs.

PubMed

Oshima, Yoshiaki; Sakamoto, Seiji; Yamasaki, Kazumasa; Mochida, Shinsuke; Funaki, Kazumi; Moriyama, Naoki; Otsuki, Akihiro; Endo, Ryo; Nakasone, Masato; Takahashi, Shunsaku; Harada, Tomomi; Minami, Yukari; Inagaki, Yoshimi

2016-01-01

Isoflurane and sevoflurane protect lungs with ischemia-reperfusion (IR) injury. We examined the influence of desflurane on IR lung injury using isolated rabbit lungs perfused with a physiological salt solution. The isolated lungs were divided into three groups: IR, desflurane-treated ischemia-reperfusion (DES-IR), and ventilation/perfusion-continued control (Cont) groups (n = 6 per group). In the DES-IR group, inhalation of desflurane at 1 minimum alveolar concentration (MAC) was conducted in a stable 30-min phase. In the IR and DES-IR groups, ventilation/perfusion was stopped for 75 min after the stable phase. Subsequently, they were resumed. Each lung was placed on a balance, and weighed. Weight changes were measured serially throughout this experiment. The coefficient of filtration (K fc ) was determined immediately before ischemia and 60 min after reperfusion. Furthermore, bronchoalveolar lavage fluid (BALF) was collected from the right bronchus at the completion of the experiment. After the completion of the experiment, the left lung was dried, and the lung wet-to-dry weight ratio (W/D) was calculated. The K fc values at 60 min after perfusion were 0.40 ± 0.13 ml/min/mmHg/100 g in the DES-IR group, 0.26 ± 0.07 ml/min/mmHg/100 g in the IR group, and 0.22 ± 0.08 (mean ± SD) ml/mmHg/100 g in the Cont group. In the DES-IR group, the K fc at 60 min after the start of reperfusion was significantly higher than in the other groups. In the DES-IR group, W/D was significantly higher than in the Cont group. In the DES-IR group, the BALF concentrations of nitric oxide metabolites were significantly higher than in the other groups. In the DES-IR group, the total amount of vascular endothelial growth factor in BALF was significantly higher than in the Cont group. The pre-inhalation of desflurane at 1 MAC exacerbates pulmonary IR injury in isolated/perfused rabbit lungs.

Caracterisation thermique de modules de refroidissement pour la photovoltaique concentree

NASA Astrophysics Data System (ADS)

Collin, Louis-Michel

Pour rentabiliser la technologie des cellules solaires, une reduction du cout d'exploitation et de fabrication est necessaire. L'utilisation de materiaux photovoltaiques a un impact appreciable sur le prix final par quantite d'energie produite. Une technologie en developpement consiste a concentrer la lumiere sur les cellules solaires afin de reduire cette quantite de materiaux. Or, concentrer la lumiere augmente la temperature de la cellule et diminue ainsi son efficacite. Il faut donc assurer a la cellule un refroidissement efficace. La charge thermique a evacuer de la cellule passe au travers du recepteur, soit la composante soutenant physiquement la cellule. Le recepteur transmet le flux thermique de la cellule a un systeme de refroidissement. L'ensemble recepteur-systeme de refroidissement se nomme module de refroidissement. Habituellement, la surface du recepteur est plus grande que celle de la cellule. La chaleur se propage donc lateralement dans le recepteur au fur et a mesure qu'elle traverse le recepteur. Une telle propagation de la chaleur fournit une plus grande surface effective, reduisant la resistance thermique apparente des interfaces thermiques et du systeme de refroidissement en aval vers le module de refroidissement. Actuellement, aucune installation ni methode ne semble exister afin de caracteriser les performances thermiques des recepteurs. Ce projet traite d'une nouvelle technique de caracterisation pour definir la diffusion thermique du recepteur a l'interieur d'un module de refroidissement. Des indices de performance sont issus de resistances thermiques mesurees experimentalement sur les modules. Une plateforme de caracterisation est realisee afin de mesurer experimentalement les criteres de performance. Cette plateforme injecte un flux thermique controle sur une zone localisee de la surface superieure du recepteur. L'injection de chaleur remplace le flux thermique normalement fourni par la cellule. Un systeme de refroidissement est installe a la surface opposee du recepteur pour evacuer la chaleur injectee. Les resultats mettent egalement en evidence l'importance des interfaces thermiques et les avantages de diffuser la chaleur dans les couches metalliques avant de la conduire au travers des couches dielectriques du recepteur. Des recepteurs de multiples compositions ont ete caracterises, demontrant que les outils developpes peuvent definir la capacite de diffusion thermique. La repetabilite de la plateforme est evaluee par l'analyse de l'etendue des mesures repetees sur des echantillons selectionnes. La plateforme demontre une precision et reproductibilite de +/- 0.14 ° C/W. Ce travail fournit des outils pour la conception des recepteurs en proposant une mesure qui permet de comparer et d'evaluer l'impact thermique de ces recepteurs integres a uri module de refroidissement. Mots-cles : cellule solaire, photovoltaique, transfert de chaleur, concentration, resistances thermiques, plateforme de caracterisation, refroidissement

Advanced treatment planning using direct 4D optimisation for pencil-beam scanned particle therapy

NASA Astrophysics Data System (ADS)

Bernatowicz, Kinga; Zhang, Ye; Perrin, Rosalind; Weber, Damien C.; Lomax, Antony J.

2017-08-01

We report on development of a new four-dimensional (4D) optimisation approach for scanned proton beams, which incorporates both irregular motion patterns and the delivery dynamics of the treatment machine into the plan optimiser. Furthermore, we assess the effectiveness of this technique to reduce dose to critical structures in proximity to moving targets, while maintaining effective target dose homogeneity and coverage. The proposed approach has been tested using both a simulated phantom and a clinical liver cancer case, and allows for realistic 4D calculations and optimisation using irregular breathing patterns extracted from e.g. 4DCT-MRI (4D computed tomography-magnetic resonance imaging). 4D dose distributions resulting from our 4D optimisation can achieve almost the same quality as static plans, independent of the studied geometry/anatomy or selected motion (regular and irregular). Additionally, current implementation of the 4D optimisation approach requires less than 3 min to find the solution for a single field planned on 4DCT of a liver cancer patient. Although 4D optimisation allows for realistic calculations using irregular breathing patterns, it is very sensitive to variations from the planned motion. Based on a sensitivity analysis, target dose homogeneity comparable to static plans (D5-D95  <5%) has been found only for differences in amplitude of up to 1 mm, for changes in respiratory phase  <200 ms and for changes in the breathing period of  <20 ms in comparison to the motions used during optimisation. As such, methods to robustly deliver 4D optimised plans employing 4D intensity-modulated delivery are discussed.

Aile adaptable : Design du systeme d'actionnement de l'aileron rigide, caracterisation des capteurs de pression et instrumentation pour des tests statiques =

NASA Astrophysics Data System (ADS)

Vincent, Jean-Baptiste

This Master's thesis is part of a multidisciplinary optimisation project initiated by the Consortium for Research and Innovation in Aerospace in Quebec (CRIAQ) ; this project is about designing and manufacturing a morphing wing demonstrator. The morphing design adopted in this project is based on airfoil thickness variation applied to the upper skin. This morphing generates a change in the laminar to turbulent boundary layer transition position on top of the wing. The position of this transition area leads to significant changes in the aerodynamic performance of the wing. The study presented here focuses on the design of the conventional aileron actuation system and on the characterization of the high sensitivity differential pressure sensors installed on the upper skin in order to determine the laminar to turbulent transition position. Furthermore, the study focuses on the data acquisition system for the morphing wing structural test validation. The aileron actuation system is based on a linear actuator actuated by a brushless motor. The component choice is presented as well as the command method. A static validation as well as wind tunnel validation is presented. The pressure sensor characterization is performed by installing three of those high sensitivity differential pressure sensors in a bi-dimensional known airfoil. This study goes through the process of determining the sensor position in order to observe the transition area by using a computational fluid dynamics (CFD) statistic approach. The validation of the laminar to turbulent transition position is carried out with a series of wind tunnel tests. A structural test has been executed in order to validate the wing structure. This Master's thesis shows the data acquisition system for the microstrain measurement installed inside the morphing wing. A hardware and software architecture description is developed and presented as well as the practical results.

Mal-Development of the Penis and Loss of Fertility in Male Rats Treated Neonatally with Female Contraceptive 17α-Ethinyl Estradiol: A Dose-Response Study and a Comparative Study with a Known Estrogenic Teratogen Diethylstilbestrol

PubMed Central

Mathews, Ensa; Braden, Tim D.; Williams, Carol S.; Williams, John W.; Bolden-Tiller, Olga; Goyal, Hari O.

2009-01-01

The objectives of this study were to find a minimal dose of 17α-ethinyl estradiol (EE) that is detrimental to the developing penis and fertility and to compare estrogenic effects between EE and diethylstilbestrol (DES). Neonatal rats received EE at 10 ng (1 μg/kg), 100 ng, 1 μg, or 10 μg per pup on alternate days from postnatal days 1 to 11 (dose-response study) or received EE or DES at 100 ng per pup daily from postnatal days 1 to 6 (comparative study). Effects of EE were dose dependent, with ≥ 100-ng dose inducing significant (p < 0.05) reductions in penile length, weight, and diameter. Additionally, the penis was malformed, characterized by underdeveloped os penis and accumulation of fat cells. Fertility was 0% in the ≥ 1-μg groups, in contrast to 60% in the 100-ng group and 100% in the 10-ng and control groups. Animals treated with ≥ 10 ng had significant reductions in the weight of bulbospongious muscle, testis, seminal vesicle, epididymal fat pad, and in epididymal sperm numbers. A comparison of EE and DES effects showed similar reductions in penile weight and length and the weight of bulbospongiosus muscle, testis, seminal vesicle, epididymis, and epididymal fat pad in both adolescent and adult rats. While 5/6 control males sired, only 1/6 in the EE group and 0/6 in the DES group sired. Hence, neonatal exposure to EE at 10 ng (environmentally relevant dose) adversely affects male reproductive organs. A dose ten times higher than this leads to permanently mal-developed penis and infertility. Furthermore, EE and DES exposures show similar level of toxicity to male reproductive organs. PMID:19729556

Bottlebrush elastomers: a promising molecular engineering route to tunable, prestrain-free dielectric elastomers (Conference Presentation)

NASA Astrophysics Data System (ADS)

Vatankhah-Varnosfaderani, Mohammad; Daniel, William F. M.; Zhushma, Alexandr P.; Li, Qiaoxi; Morgan, Benjamin J.; Matyjaszewski, Krzysztof; Armstrong, Daniel P.; Dobrynin, Andrey V.; Sheyko, Sergei S.; Spontak, Richard J.

2017-04-01

Electroactive polymers (EAPs) refer to a broad range of relatively soft materials that change size and/or shape upon application of an electrical stimulus. Of these, dielectric elastomers (DEs) generated from either chemically- or physically-crosslinked polymer networks afford the highest levels of electroactuation strain, thereby making this class of EAPs the leading technology for artificial-muscle applications. While mechanically prestraining elastic networks remarkably enhances DEs electroactuation, external prestrain protocols severely limit both actuator performance and device implementation due to gradual DE stress relaxation and the presence of a cumbersome load frame. These drawbacks have persisted with surprisingly minimal advances in the actuation of single-component elastomers since the dawn of the "pre-strain era" introduced by Pelrine et al. (Science, 2000). In this work, we present a bottom-up, molecular-based strategy for the design of prestrain-free (freestanding) DEs derived from covalently-crosslinked bottlebrush polymers. This architecture, wherein design factors such as crosslink density, graft density and graft length can all be independently controlled, yields inherently strained polymer networks that can be readily adapted to a variety of chemistries. To validate the use of these molecularly-tunable materials as DEs, we have synthesized a series of bottlebrush silicone elastomers in as-cast shapes. Examination of these materials reveals that they undergo giant electroactuation strains (>300%) at relatively low fields (<10 V/m), thereby outperforming all commercial DEs to date and opening new opportunities in responsive soft-material technologies (e.g., robotics). The molecular design approach to controlling (electro)mechanical developed here is independent of chemistry and permits access to an unprecedented range of actuation properties from elastomeric materials with traditionally modest electroactuation performance (e.g., polydimethylsiloxane, PDMS). Experimental results obtained here compare favorably with theoretical predictions and demonstrate that the unique behavior of these materials is a direct consequence of the molecular architecture.

Stent Thrombosis With Drug-Eluting Stents and Bioresorbable Scaffolds: Evidence From a Network Meta-Analysis of 147 Trials.

PubMed

Kang, Si-Hyuck; Chae, In-Ho; Park, Jin-Joo; Lee, Hak Seung; Kang, Do-Yoon; Hwang, Seung-Sik; Youn, Tae-Jin; Kim, Hyo-Soo

2016-06-27

This study sought to perform a systematic review and network meta-analysis to compare the relative safety and efficacy of contemporary DES and BVS. To improve outcomes of patients undergoing percutaneous coronary revascularization, there have been advances in the design of drug-eluting stents (DES), including the development of drug-eluting bioresorbable vascular scaffolds (BVS). Prospective, randomized, controlled trials comparing bare-metal stents (BMS), paclitaxel-eluting stents (PES), sirolimus-eluting stents (SES), Endeavor zotarolimus-eluting stents (E-ZES), cobalt-chromium (CoCr) everolimus-eluting stents (EES), platinum-chromium (PtCr)-EES, biodegradable polymer (BP)-EES, Resolute zotarolimus-eluting stents (R-ZES), BP biolimus-eluting stents (BP-BES), hybrid sirolimus-eluting stents (H [Orsiro]-SES), polymer-free sirolimus- and probucol-eluting stents, or BVS were searched in online databases. The primary endpoint was definite or probable stent thrombosis at 1 year. A total of 147 trials including 126,526 patients were analyzed in this study. All contemporary DES were superior to BMS and PES in terms of definite or probable stent thrombosis at 1 year. CoCr-EES, PtCr-EES, and H-SES were associated with significantly lower risk than BVS. CoCr-EES and H-SES were superior to SES and BP-BES. The risk of myocardial infarction was significantly lower with H-SES than with BVS. There were no significant differences regarding all-cause or cardiac mortality. Contemporary devices including BVS showed comparably low risks of repeat revascularization. Contemporary DES, including biocompatible DP-DES, BP-DES, and polymer-free DES, showed a low risk of definite or probable stent thrombosis at 1 year. BVS had an increased risk of device thrombosis compared with CoCr-EES, PtCr-EES, and H-SES. Data from extended follow-up are warranted to confirm the long-term safety of contemporary coronary devices. Copyright © 2016 American College of Cardiology Foundation. Published by Elsevier Inc. All rights reserved.

Critical review of membrane bioreactor models--part 1: biokinetic and filtration models.

PubMed

Naessens, W; Maere, T; Nopens, I

2012-10-01

Membrane bioreactor technology exists for a couple of decades, but has not yet overwhelmed the market due to some serious drawbacks of which operational cost due to fouling is the major contributor. Knowledge buildup and optimisation for such complex systems can significantly benefit from mathematical modelling. In this paper, the vast literature on modelling MBR biokinetics and filtration is critically reviewed. It was found that models cover the wide range of empirical to detailed mechanistic descriptions and have mainly been used for knowledge development and to a lesser extent for system optimisation/control. Moreover, studies are still predominantly performed at lab or pilot scale. Trends are discussed, knowledge gaps identified and interesting routes for further research suggested. Copyright © 2012 Elsevier Ltd. All rights reserved.

Optimisation Issues of High Throughput Medical Data and Video Streaming Traffic in 3G Wireless Environments.

PubMed

Istepanian, R S H; Philip, N

2005-01-01

In this paper we describe some of the optimisation issues relevant to the requirements of high throughput of medical data and video streaming traffic in 3G wireless environments. In particular we present a challenging 3G mobile health care application that requires a demanding 3G medical data throughput. We also describe the 3G QoS requirement of mObile Tele-Echography ultra-Light rObot system (OTELO that is designed to provide seamless 3G connectivity for real-time ultrasound medical video streams and diagnosis from a remote site (robotic and patient station) manipulated by an expert side (specialists) that is controlling the robotic scanning operation and presenting a real-time feedback diagnosis using 3G wireless communication links.

Optimisation of insect cell growth in deep-well blocks: development of a high-throughput insect cell expression screen.

PubMed

Bahia, Daljit; Cheung, Robert; Buchs, Mirjam; Geisse, Sabine; Hunt, Ian

2005-01-01

This report describes a method to culture insects cells in 24 deep-well blocks for the routine small-scale optimisation of baculovirus-mediated protein expression experiments. Miniaturisation of this process provides the necessary reduction in terms of resource allocation, reagents, and labour to allow extensive and rapid optimisation of expression conditions, with the concomitant reduction in lead-time before commencement of large-scale bioreactor experiments. This therefore greatly simplifies the optimisation process and allows the use of liquid handling robotics in much of the initial optimisation stages of the process, thereby greatly increasing the throughput of the laboratory. We present several examples of the use of deep-well block expression studies in the optimisation of therapeutically relevant protein targets. We also discuss how the enhanced throughput offered by this approach can be adapted to robotic handling systems and the implications this has on the capacity to conduct multi-parallel protein expression studies.

Mutual information-based LPI optimisation for radar network

NASA Astrophysics Data System (ADS)

Shi, Chenguang; Zhou, Jianjiang; Wang, Fei; Chen, Jun

2015-07-01

Radar network can offer significant performance improvement for target detection and information extraction employing spatial diversity. For a fixed number of radars, the achievable mutual information (MI) for estimating the target parameters may extend beyond a predefined threshold with full power transmission. In this paper, an effective low probability of intercept (LPI) optimisation algorithm is presented to improve LPI performance for radar network. Based on radar network system model, we first provide Schleher intercept factor for radar network as an optimisation metric for LPI performance. Then, a novel LPI optimisation algorithm is presented, where for a predefined MI threshold, Schleher intercept factor for radar network is minimised by optimising the transmission power allocation among radars in the network such that the enhanced LPI performance for radar network can be achieved. The genetic algorithm based on nonlinear programming (GA-NP) is employed to solve the resulting nonconvex and nonlinear optimisation problem. Some simulations demonstrate that the proposed algorithm is valuable and effective to improve the LPI performance for radar network.

A novel global Harmony Search method based on Ant Colony Optimisation algorithm

NASA Astrophysics Data System (ADS)

Fouad, Allouani; Boukhetala, Djamel; Boudjema, Fares; Zenger, Kai; Gao, Xiao-Zhi

2016-03-01

The Global-best Harmony Search (GHS) is a stochastic optimisation algorithm recently developed, which hybridises the Harmony Search (HS) method with the concept of swarm intelligence in the particle swarm optimisation (PSO) to enhance its performance. In this article, a new optimisation algorithm called GHSACO is developed by incorporating the GHS with the Ant Colony Optimisation algorithm (ACO). Our method introduces a novel improvisation process, which is different from that of the GHS in the following aspects. (i) A modified harmony memory (HM) representation and conception. (ii) The use of a global random switching mechanism to monitor the choice between the ACO and GHS. (iii) An additional memory consideration selection rule using the ACO random proportional transition rule with a pheromone trail update mechanism. The proposed GHSACO algorithm has been applied to various benchmark functions and constrained optimisation problems. Simulation results demonstrate that it can find significantly better solutions when compared with the original HS and some of its variants.

Nanomedicine for the reduction of the thrombogenicity of stent coatings

PubMed Central

Karagkiozaki, Varvara C; Logothetidis, Stergios D; Kassavetis, Spyridon N; Giannoglou, George D

2010-01-01

The treatment of patients with drug-eluting stents (DES) continues to evolve with the current emergence of DES technology that offers a combination of pharmacological and mechanical approaches to prevent arterial restenosis. However, despite the promising short-term and mid-term outcomes of DES, there are valid concerns about adverse clinical effects of late stent thrombosis. In this study, we present an example of how nanomedicine can offer solutions for improving stent coating manufacturing, by producing nanomaterials with tailored and controllable properties. The study is based on the exploitation of human platelets response towards carbon-based nanocoatings via atomic force microscope (AFM). AFM can facilitate the comprehensive analysis of platelets behavior onto stent nanocoatings and enable the study of thrombogenicity. Platelet-rich plasma from healthy donors was used for the real-time study of biointerfacial interactions. The carbon nanomaterials were developed by rf magnetron sputtering technique under controllable deposition conditions to provide favorable surface nanotopography. It was shown that by altering the surface topography of nanocoatings, the activation of platelets can be affected, while the carbon nanocoatings having higher surface roughness were found to be less thrombogenic in terms of platelets adhesion. This is an actual solution for improving the stent coating fabrication. PMID:20463940

Analgesic and anti-inflammatory controlled-released injectable microemulsion: Pseudo-ternary phase diagrams, in vitro, ex vivo and in vivo evaluation.

PubMed

Pineros, Isabel; Slowing, Karla; Serrano, Dolores R; de Pablo, Esther; Ballesteros, Maria Paloma

2017-04-01

Development of analgesic and anti-inflammatory controlled-released injectable microemulsions utilising lysine clonixinate (LC) as model drug and generally regarded as safe (GRAS) excipients. Different microemulsions were optimised through pseudo-ternary phase diagrams and characterised measuring droplet size, viscosity, ex vivo haemolytic activity and in vitro drug release. The anti-inflammatory and analgesic activity was tested in mice (Hot plate test) and rats (Carrageenan-induced paw edema test) respectively and their activity was compared to an aqueous solution of LC salt. The aqueous solution showed a faster and shorter response whereas the optimised microemulsion increased significantly (p<0.01) the potency and duration of the analgesic and anti-inflammatory activity after deep intramuscular injection. The droplet size and the viscosity were key factors to control the drug release from the systems and enhance the effect of the formulations. The microemulsion consisting of Labrafil®/Lauroglycol®/Polysorbate 80/water with LC (56.25/18.75/15/10, w/w) could be a promising formulation after buccal surgery due to its ability to control the drug release and significantly achieve greater analgesic and anti-inflammatory effect over 24h. Copyright © 2016. Published by Elsevier B.V.

A systematic review and meta-analysis of trypanosome prevalence in tsetse flies

USDA-ARS?s Scientific Manuscript database

Background: The optimisation of trypanosomosis control programs warrants a good knowledge of the main vector of animal and human trypanosomes in sub-Saharan Africa, the tsetse fly. An important aspect of the tsetse fly population is its trypanosome infection prevalence, as it determines the intensit...

33 CFR 151.05 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... control system approved by the government of the country under whose authority the ship is operating... scientific research relating to pollution abatement or control. Dishwater means the liquid residue from the... Cap des Rosiers to West Point, Anticosti Island, and, on the north side of Anticosti Island, the...

33 CFR 151.05 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... discharge monitoring and control system approved by the government of the country under whose authority the... purposes of legitimate scientific research relating to pollution abatement or control. Dishwater means the... line drawn from Cap des Rosiers to West Point, Anticosti Island, and, on the north side of Anticosti...

33 CFR 151.05 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... control system approved by the government of the country under whose authority the ship is operating... scientific research relating to pollution abatement or control. Dishwater means the liquid residue from the... Cap des Rosiers to West Point, Anticosti Island, and, on the north side of Anticosti Island, the...

33 CFR 151.05 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... control system approved by the government of the country under whose authority the ship is operating... scientific research relating to pollution abatement or control. Dishwater means the liquid residue from the... Cap des Rosiers to West Point, Anticosti Island, and, on the north side of Anticosti Island, the...

33 CFR 151.05 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... discharge monitoring and control system approved by the government of the country under whose authority the... purposes of legitimate scientific research relating to pollution abatement or control. Dishwater means the... line drawn from Cap des Rosiers to West Point, Anticosti Island, and, on the north side of Anticosti...

CEINMS: a toolbox to investigate the influence of different neural control solutions on the prediction of muscle excitation and joint moments during dynamic motor tasks

PubMed Central

Pizzolato, Claudio; Lloyd, David G.; Sartori, Massimo; Ceseracciu, Elena; Besier, Thor F.; Fregly, Benjamin J.; Reggiani, Monica

2015-01-01

Personalized neuromusculoskeletal (NMS) models can represent the neurological, physiological, and anatomical characteristics of an individual and can be used to estimate the forces generated inside the human body. Currently, publicly available software to calculate muscle forces are restricted to static and dynamic optimisation methods, or limited to isometric tasks only. We have created and made freely available for the research community the Calibrated EMG-Informed NMS Modelling Toolbox (CEINMS), an OpenSim plug-in that enables investigators to predict different neural control solutions for the same musculoskeletal geometry and measured movements. CEINMS comprises EMG-driven and EMG-informed algorithms that have been previously published and tested. It operates on dynamic skeletal models possessing any number of degrees of freedom and musculotendon units and can be calibrated to the individual to predict measured joint moments and EMG patterns. In this paper we describe the components of CEINMS and its integration with OpenSim. We then analyse how EMG-driven, EMG-assisted, and static optimisation neural control solutions affect the estimated joint moments, muscle forces, and muscle excitations, including muscle co-contraction. PMID:26522621

[The OPTIMISE study (Optimal Type 2 Diabetes Management Including Benchmarking and Standard Treatment]. Results for Luxembourg].

PubMed

Michel, G

2012-01-01

The OPTIMISE study (NCT00681850) has been run in six European countries, including Luxembourg, to prospectively assess the effect of benchmarking on the quality of primary care in patients with type 2 diabetes, using major modifiable vascular risk factors as critical quality indicators. Primary care centers treating type 2 diabetic patients were randomized to give standard care (control group) or standard care with feedback benchmarked against other centers in each country (benchmarking group). Primary endpoint was percentage of patients in the benchmarking group achieving pre-set targets of the critical quality indicators: glycated hemoglobin (HbAlc), systolic blood pressure (SBP) and low-density lipoprotein (LDL) cholesterol after 12 months follow-up. In Luxembourg, in the benchmarking group, more patients achieved target for SBP (40.2% vs. 20%) and for LDL-cholesterol (50.4% vs. 44.2%). 12.9% of patients in the benchmarking group met all three targets compared with patients in the control group (8.3%). In this randomized, controlled study, benchmarking was shown to be an effective tool for improving critical quality indicator targets, which are the principal modifiable vascular risk factors in diabetes type 2.

Visual grading characteristics and ordinal regression analysis during optimisation of CT head examinations.

PubMed

Zarb, Francis; McEntee, Mark F; Rainford, Louise

2015-06-01

To evaluate visual grading characteristics (VGC) and ordinal regression analysis during head CT optimisation as a potential alternative to visual grading assessment (VGA), traditionally employed to score anatomical visualisation. Patient images (n = 66) were obtained using current and optimised imaging protocols from two CT suites: a 16-slice scanner at the national Maltese centre for trauma and a 64-slice scanner in a private centre. Local resident radiologists (n = 6) performed VGA followed by VGC and ordinal regression analysis. VGC alone indicated that optimised protocols had similar image quality as current protocols. Ordinal logistic regression analysis provided an in-depth evaluation, criterion by criterion allowing the selective implementation of the protocols. The local radiology review panel supported the implementation of optimised protocols for brain CT examinations (including trauma) in one centre, achieving radiation dose reductions ranging from 24 % to 36 %. In the second centre a 29 % reduction in radiation dose was achieved for follow-up cases. The combined use of VGC and ordinal logistic regression analysis led to clinical decisions being taken on the implementation of the optimised protocols. This improved method of image quality analysis provided the evidence to support imaging protocol optimisation, resulting in significant radiation dose savings. • There is need for scientifically based image quality evaluation during CT optimisation. • VGC and ordinal regression analysis in combination led to better informed clinical decisions. • VGC and ordinal regression analysis led to dose reductions without compromising diagnostic efficacy.

La planification préalable des soins pour les patients en pédiatrie

PubMed Central

2008-01-01

RÉSUMÉ Les progrès médicaux et technologiques ont permis d’ac-croître les taux de survie et d’améliorer la qualité de vie des nourrissons, des enfants et des adolescents ayant des maladies chroniques mettant la vie en danger. La planifi-cation préalable des soins inclut le processus relié aux discussions sur les traitements essentiels au maintien de la survie et la détermination des objectifs des soins de longue durée. Les dispensateurs de soins pédiatriques ont l’obligation éthique d’assimiler cet aspect des soins médicaux. Le présent document de principes vise à aider les dispensateurs de soins à discuter de la planification préalable des soins des patients pédiatriques dans diverses situations. La planification préalable des soins exige des communications efficaces afin de clarifier les objectifs des soins et de s’entendre sur les traitements pertinents ou non pour réaliser ces objectifs, y compris les mesures de réanimation et les mesures palliatives.

Long term outcomes of new generation drug eluting stents versus coronary artery bypass grafting for multivessel and/or left main coronary artery disease. A Bayesian network meta-analysis of randomized controlled trials.

PubMed

Mina, George S; Watti, Hussam; Soliman, Demiana; Shewale, Anand; Atkins, Jessica; Reddy, Pratap; Dominic, Paari

2018-01-05

Most data guiding revascularization of multivessel disease (MVD) and/or left main disease (LMD) favor coronary artery bypass grafting (CABG) over percutaneous coronary intervention (PCI). However, those data are based on trials comparing CABG to bare metal stents (BMS) or old generation drug eluting stents (OG-DES). Hence, it is essential to outcomes of CABG to those of new generation drug eluting stents (NG-DES). We searched PUBMED and Cochrane database for trials evaluating revascularization of MVD and/or LMD with CABG and/or PCI. A Bayesian network meta-analysis was performed to calculate odds ratios (OR) and 95% credible intervals (CrI). Primary outcome was major adverse cardiovascular events (MACE) at 3-5 years. Secondary outcomes were mortality, cerebrovascular accidents (CVA), myocardial infarction (MI) and repeat revascularization. We included 10 trials with a total of 9287 patients. CABG was associated with lower MACE when compared to BMS or OG-DES. However, MACE was not significantly different between CABG and NG-DES (OR 0.79, CrI 0.45-1.40). Moreover, there were no significant differences between CABG and NG-DES in mortality (OR 0.78, CrI 0.45-1.37), CVA (OR 0.93 CrI 0.35-2.2) or MI (OR 0.6, CrI 0.17-2.0). On the other hand, CABG was associated with lower repeat revascularization (OR 0.55, CrI 0.36-0.84). Our study suggests that NG-DES is an acceptable alternative to CABG in patients with MVD and/or LMD. However, repeat revascularization remains to be lower with CABG than with PCI. Copyright © 2018. Published by Elsevier Inc.

Impact of Paclitaxel-Eluting Balloons Compared to Second-Generation Drug-Eluting Stents for of In-Stent Restenosis in a Primarily Acute Coronary Syndrome Population

PubMed Central

Marquis-Gravel, Guillaume; Matteau, Alexis; Potter, Brian J; Gobeil, François; Noiseux, Nicolas; Stevens, Louis-Mathieu; Mansour, Samer

2017-01-01

Background The place of drug-eluting balloons (DEB) in the treatment of in-stent restenosis (ISR) is not well-defined, particularly in a population of all-comers with acute coronary syndromes (ACS). Objective Compare the clinical outcomes of DEB with second-generation drug-eluting stents (DES) for the treatment of ISR in a real-world population with a high proportion of ACS. Methods A retrospective analysis of consecutive patients with ISR treated with a DEB compared to patients treated with a second-generation DES was performed. The primary endpoint was a composite of major adverse cardiovascular events (MACE: all-cause death, non-fatal myocardial infarction, and target lesion revascularization). Comparisons were performed using Cox proportional hazards multivariate adjustment and Kaplan-Meier analysis with log-rank. Results The cohort included 91 patients treated with a DEB and 89 patients treated with a DES (74% ACS). Median follow-up was 26 months. MACE occurred in 33 patients (36%) in the DEB group, compared to 17 patients (19%) in the DES group (p log-rank = 0.02). After multivariate adjustment, there was no significant difference between the groups (HR for DEB = 1.45 [95%CI: 0.75-2.83]; p = 0.27). Mortality rates at 1 year were 11% with DEB, and 3% with DES (p = 0.04; adjusted HR = 2.85 [95%CI: 0.98-8.32]; p = 0.06). Conclusion In a population with a high proportion of ACS, a non-significant numerical signal towards increased rates of MACE with DEB compared to second-generation DES for the treatment of ISR was observed, mainly driven by a higher mortality rate. An adequately-powered randomized controlled trial is necessary to confirm these findings. PMID:28977052

CO2 laser irradiation enhances CaF2 formation and inhibits lesion progression on demineralized dental enamel-in vitro study.

PubMed

Zancopé, Bruna R; Rodrigues, Lívia P; Parisotto, Thais M; Steiner-Oliveira, Carolina; Rodrigues, Lidiany K A; Nobre-dos-Santos, Marinês

2016-04-01

This study evaluated if Carbon dioxide (CO2) (λ 10.6 μm) laser irradiation combined with acidulated phosphate fluoride gel application (APF gel) enhances "CaF2" uptake by demineralized enamel specimens (DES) and inhibits enamel lesion progression. Thus, two studies were conducted and DES were subjected to APF gel combined or not with CO2 laser irradiation (11.3 or 20.0 J/cm(2), 0.4 or 0.7 W) performed before, during, or after APF gel application. In study 1, 165 DES were allocated to 11 groups. Fluoride as "CaF2 like material" formed on enamel was determined in 100 DES (n = 10/group), and the surface morphologies of 50 specimens were evaluated by scanning electron microscopy (SEM) before and after "CaF2" extraction. In study 2, 165 DES (11 groups, n = 15), subjected to the same treatments as in study 1, were further subjected to a pH-cycling model to simulate a high cariogenic challenge. The progression of demineralization in DES was evaluated by cross-sectional microhardness and polarized light microscopy analyses. Laser at 11.3 J/cm(2) applied during APF gel application increased "CaF2" uptake on enamel surface. Laser irradiation and APF gel alone arrested the lesion progression compared with the control (p < 0.05). Areas of melting, fusion, and cracks were observed. CO2 laser irradiation, combined with a single APF application enhanced "CaF2" uptake on enamel surface and a synergistic effect was found. However, regarding the inhibition of caries lesion progression, no synergistic effect could be demonstrated. In conclusion, the results have shown that irradiation with specific laser parameters significantly enhanced CaF2 uptake by demineralized enamel and inhibited lesion progression.

Tracheal Self-Expandable Metallic Stents: A Comparative Study of Three Different Stents in a Rabbit Model.

PubMed

Serrano, Carolina; Lostalé, Fernando; Rodríguez-Panadero, Francisco; Blas, Ignacio de; Laborda, Alicia; de Gregorio, Miguel Angel

2016-03-01

The objective of this study was to assess tracheal reactivity after the deployment of different self-expandable metal stents (SEMS). Forty female New Zealand rabbits were divided into four groups. Three groups received three different SEMS: steel (ST), nitinol (NiTi), or nitinol drug-eluting stent (DES); the fourth group was the control group (no stent). Stents were deployed percutaneously under fluoroscopic guidance. Animals were assessed by multi-slice, computed tomography (CT) scans, and tracheas were collected for anatomical pathology (AP) study. Data from CT and AP were statistically analyzed and correlated. The DES group had the longest stenosis (20.51±14.08mm vs. 5.84±12.43 and 6.57±6.54mm in NiTi and ST, respectively, day 30; P<.05), and higher granuloma formation on CT (50% of cases). The NiTi group showed the lowest grade of stenosis (2.86±6.91% vs. 11.28±13.98 and 15.54±25.95% in DES and ST, respectively; P<.05). The AP study revealed that the ST group developed intense proliferative reactivity compared to the other groups. In the DES group, a destructive response was observed in 70% of the animals, while the NiTi was the least reactive stent. CT was more effective in detecting wall thickening (positive correlation of 68.9%; P<.001) than granuloma (not significant). The ST group developed granulomas and significant stenosis. NiTi was the least reactive stent, while DES caused significant lesions that may be related to drug dosage. This type of DES stent is therefore not recommended for the treatment of tracheobronchial stenosis. Copyright © 2015 SEPAR. Published by Elsevier Espana. All rights reserved.

76 FR 76412 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-07

..., both of Des Moines, Iowa; to acquire control of Exchange Financial, Inc., and thereby indirectly... City, New Jersey; to become part of the group acting in concert to acquire control of First Federal of... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank...

Dissociation in the laboratory: a comparison of strategies.

PubMed

Leonard, K N; Telch, M J; Harrington, P J

1999-01-01

Several methods for inducing dissociation in the laboratory were examined in a sample of 78 undergraduate students. Participants scoring high or low on the Dissociative Experiences Scale participated in three dissociation challenge conditions: (a) dot-staring task, (b) administration of pulsed photic and audio stimulation and (c) stimulus deprivation. Participants recorded their dissociative experiences both before and after each of the three challenge conditions. Across conditions, high DES participants reported significantly more dissociative sensations than low DES participants, even after controlling for pre-challenge dissociation. Moreover, regardless of DES status, pulsed photo and audio stimulation produced the greatest level of dissociative symptoms. The findings suggest that the induction of dissociative symptoms in a nonclinical sample is easily accomplished in the laboratory and that those who report more dissociative symptoms in their day-to-day life exhibit more pronounced dissociative symptoms when undergoing dissociative challenge in the laboratory. Implications for the study and treatment of dissociative symptoms are discussed.

Reseaux Neuronaux Optiques

NASA Astrophysics Data System (ADS)

Bergeron, Alain

Cette recherche vise a la mise en oeuvre optique de reseaux neuronaux. Deux architectures differentes sont proposees. La premiere est la memoire associative permettant d'associer a un objet quelconque une sortie arbitraire tout en preservant l'information sur sa position. La seconde architecture, le classificateur neuronal pour le controle robotique, permet l'identification d'une entree et son classement selon differentes categories. La sortie est compatible avec les systemes numeriques standard. Pour realiser ces architectures, une approche modulaire est privilegiee. Le correlateur constitue le module de base des realisations. Differents modules sont de plus introduits pour realiser convenablement les operations neuronales. Le premier de ces modules est le seuil optoelectronique permettant de realiser une fonction non lineaire, element essentiel des reseaux neuronaux. Le second module a etre introduit est l'encodeur optonumerique, utile au classement des objets. Le probleme de l'enregistrement de la memoire est aborde a l'aide du codage iteratif global.

A physiology-based model describing heterogeneity in glucose metabolism: the core of the Eindhoven Diabetes Education Simulator (E-DES).

PubMed

Maas, Anne H; Rozendaal, Yvonne J W; van Pul, Carola; Hilbers, Peter A J; Cottaar, Ward J; Haak, Harm R; van Riel, Natal A W

2015-03-01

Current diabetes education methods are costly, time-consuming, and do not actively engage the patient. Here, we describe the development and verification of the physiological model for healthy subjects that forms the basis of the Eindhoven Diabetes Education Simulator (E-DES). E-DES shall provide diabetes patients with an individualized virtual practice environment incorporating the main factors that influence glycemic control: food, exercise, and medication. The physiological model consists of 4 compartments for which the inflow and outflow of glucose and insulin are calculated using 6 nonlinear coupled differential equations and 14 parameters. These parameters are estimated on 12 sets of oral glucose tolerance test (OGTT) data (226 healthy subjects) obtained from literature. The resulting parameter set is verified on 8 separate literature OGTT data sets (229 subjects). The model is considered verified if 95% of the glucose data points lie within an acceptance range of ±20% of the corresponding model value. All glucose data points of the verification data sets lie within the predefined acceptance range. Physiological processes represented in the model include insulin resistance and β-cell function. Adjusting the corresponding parameters allows to describe heterogeneity in the data and shows the capabilities of this model for individualization. We have verified the physiological model of the E-DES for healthy subjects. Heterogeneity of the data has successfully been modeled by adjusting the 4 parameters describing insulin resistance and β-cell function. Our model will form the basis of a simulator providing individualized education on glucose control. © 2014 Diabetes Technology Society.

Mesoscopic Field-Effect-Induced Devices in Depleted Two-Dimensional Electron Systems

NASA Astrophysics Data System (ADS)

Bachsoliani, N.; Platonov, S.; Wieck, A. D.; Ludwig, S.

2017-12-01

Nanoelectronic devices embedded in the two-dimensional electron system (2DES) of a GaAs /(Al ,Ga )As heterostructure enable a large variety of applications ranging from fundamental research to high-speed transistors. Electrical circuits are thereby commonly defined by creating barriers for carriers by the selective depletion of a preexisting 2DES. We explore an alternative approach: we deplete the 2DES globally by applying a negative voltage to a global top gate and screen the electric field of the top gate only locally using nanoscale gates placed on the wafer surface between the plane of the 2DES and the top gate. Free carriers are located beneath the screen gates, and their properties can be controlled by means of geometry and applied voltages. This method promises considerable advantages for the definition of complex circuits by the electric-field effect, as it allows us to reduce the number of gates and simplify gate geometries. Examples are carrier systems with ring topology or large arrays of quantum dots. We present a first exploration of this method pursuing field effect, Hall effect, and Aharonov-Bohm measurements to study electrostatic, dynamic, and coherent properties.

The effect of aromatization on the isotopic compositions of hydrocarbons during early diagenesis

NASA Technical Reports Server (NTRS)

Freeman, K. H.; Boreham, C. J.; Summons, R. E.; Hayes, J. M.

1994-01-01

Polycyclic aromatic hydrocarbons with varying degrees of aromatization were isolated from the Eocene Messel Shale (Rheingraben, Germany). The high abundances of these compounds and their structural resemblances to cyclic triterpenoid lipids are consistent with derivation from microbial rather than thermal processes. Compounds structurally related to oleanane contain from five to nine double bonds; those within a series of aromatized hopanoids contain from three to nine. All are products of diagenetic reactions that remove hydrogen or methyl groups, and, in several cases, break carbon-carbon bonds to open rings. Aromatized products are on average depleted in 13C relative to possible precursors by l.2% (range: l.5% enrichment to 4% depletion, n = 9). The dependence of 13C content on the number of double bonds is not, however, statistically significant and it must be concluded that there is no strong evidence for isotopic fractionation accompanying diagenetic aromatization. Isotopic differences between series (structures related to ursane, des-A-ursane, des-A-lupane, des-A-arborane, and possibly, des-A-gammacerane are present) are much greater, indicating that 13C contents are controlled primarily by source effects. Fractionations due to chromatographic isotope effects during HPLC ranged from 0.1 to 2.8%.

On the design and optimisation of new fractal antenna using PSO

NASA Astrophysics Data System (ADS)

Rani, Shweta; Singh, A. P.

2013-10-01

An optimisation technique for newly shaped fractal structure using particle swarm optimisation with curve fitting is presented in this article. The aim of particle swarm optimisation is to find the geometry of the antenna for the required user-defined frequency. To assess the effectiveness of the presented method, a set of representative numerical simulations have been done and the results are compared with the measurements from experimental prototypes built according to the design specifications coming from the optimisation procedure. The proposed fractal antenna resonates at the 5.8 GHz industrial, scientific and medical band which is suitable for wireless telemedicine applications. The antenna characteristics have been studied using extensive numerical simulations and are experimentally verified. The antenna exhibits well-defined radiation patterns over the band.

Lignes directrices canadiennes sur l’utilisation sécuritaire et efficace des opioïdes pour la douleur chronique non cancéreuse

PubMed Central

Kahan, Meldon; Wilson, Lynn; Mailis-Gagnon, Angela; Srivastava, Anita

2011-01-01

Résumé Objectif Présenter aux médecins de famille un résumé clinique pratique sur la prescription d’opioïdes à des populations particulières en se fondant sur les recommandations faites dans les lignes directrices canadiennes sur l’utilisation sécuritaire et efficace des opioïdes pour la douleur chronique non cancéreuse. Qualité des données Pour produire les lignes directrices, les chercheurs ont effectué une synthèse critique de la littérature médicale en insistant plus précisément sur les études de l’efficacité et de la sécurité des opioïdes dans des populations particulières. Message principal Les médecins de famille peuvent atténuer les risques de surdose, de sédation, d’usage abusif et de dépendance grâce à des stratégies adaptées à l’âge et à l’état de santé des patients. Dans le cas de patients à risque de dépendance, on devrait réserver les opioïdes aux douleurs nociceptives ou neuropathiques bien définies qui n’ont pas répondu aux traitements de première intention. Il faut procéder lentement au titrage des opioïdes, avec des dispensations fréquentes et une étroite surveillance pour dépister tout signe d’usage abusif. Une dépendance aux opioïdes suspectée est prise en charge au moyen d’une thérapie structurée aux opioïdes, d’un traitement à la méthadone ou à la buprénorphine ou encore d’un traitement fondé sur l’abstinence. Les patients souffrant de troubles de l’humeur ou d’anxiété ont tendance à avoir une réponse analgésique atténuée aux opioïdes, sont à risque plus élevé d’usage abusif et prennent souvent des sédatifs qui interagissent défavorablement avec les opioïdes. Il faut prendre des précautions semblables à celles utilisées avec d’autres patients à risque élevé. Il faut faire un sevrage progressif si la douleur du patient demeure sévère même avec un essai adéquat de thérapie aux opioïdes. Chez les personnes âgées, la sédation, les chutes et la surdose peuvent être minimisées en utilisant des doses initiales faibles, un titrage plus lent, un sevrage des benzodiazépines et une bonne éducation des patients. Dans le cas des femmes enceintes qui prennent des opioïdes chaque jour, il faut faire un sevrage progressif et cesser complètement. Si ce n’est pas possible, il faut administrer la dose efficace la plus faible. Les femmes enceintes qui ont une dépendance aux opioïdes devraient recevoir un traitement à la méthadone. Les adolescents sont à risque élevé de surdose d’opioïdes, d’usage abusif et de dépendance. Les patients qui ont des adolescents qui vivent à la maison devraient entreposer leurs opioïdes dans un lieu sûr. Les adolescents ont rarement besoin d’une thérapie à long terme aux opioïdes. Conclusion Les médecins de famille doivent tenir compte de l’âge, de la condition psychiatrique, du degré de risque de dépendance du patient et d’autres facteurs quand ils prescrivent des opioïdes pour la douleur chronique.

78 FR 6045 - Information Sharing Among Federal Home Loan Banks

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-29

... Banks-- specifically, the Atlanta, Chicago, Dallas, Des Moines, Indianapolis, New York, Pittsburgh, San... because part 911 of the Finance Board's regulations, which continues to govern the control of unpublished... replace part 911 with new regulations governing the control of unpublished information (which is referred...

The use of genomic coancestry matrices in the optimisation of contributions to maintain genetic diversity at specific regions of the genome.

PubMed

Gómez-Romano, Fernando; Villanueva, Beatriz; Fernández, Jesús; Woolliams, John A; Pong-Wong, Ricardo

2016-01-13

Optimal contribution methods have proved to be very efficient for controlling the rates at which coancestry and inbreeding increase and therefore, for maintaining genetic diversity. These methods have usually relied on pedigree information for estimating genetic relationships between animals. However, with the large amount of genomic information now available such as high-density single nucleotide polymorphism (SNP) chips that contain thousands of SNPs, it becomes possible to calculate more accurate estimates of relationships and to target specific regions in the genome where there is a particular interest in maximising genetic diversity. The objective of this study was to investigate the effectiveness of using genomic coancestry matrices for: (1) minimising the loss of genetic variability at specific genomic regions while restricting the overall loss in the rest of the genome; or (2) maximising the overall genetic diversity while restricting the loss of diversity at specific genomic regions. Our study shows that the use of genomic coancestry was very successful at minimising the loss of diversity and outperformed the use of pedigree-based coancestry (genetic diversity even increased in some scenarios). The results also show that genomic information allows a targeted optimisation to maintain diversity at specific genomic regions, whether they are linked or not. The level of variability maintained increased when the targeted regions were closely linked. However, such targeted management leads to an important loss of diversity in the rest of the genome and, thus, it is necessary to take further actions to constrain this loss. Optimal contribution methods also proved to be effective at restricting the loss of diversity in the rest of the genome, although the resulting rate of coancestry was higher than the constraint imposed. The use of genomic matrices when optimising contributions permits the control of genetic diversity and inbreeding at specific regions of the genome through the minimisation of partial genomic coancestry matrices. The formula used to predict coancestry in the next generation produces biased results and therefore it is necessary to refine the theory of genetic contributions when genomic matrices are used to optimise contributions.

Groundwater recharge and chemical evolution in the southern High Plains of Texas, USA

NASA Astrophysics Data System (ADS)

Fryar, Alan; Mullican, William; Macko, Stephen

2001-11-01

The unconfined High Plains (Ogallala) aquifer is the largest aquifer in the USA and the primary water supply for the semiarid southern High Plains of Texas and New Mexico. Analyses of water and soils northeast of Amarillo, Texas, together with data from other regional studies, indicate that processes during recharge control the composition of unconfined groundwater in the northern half of the southern High Plains. Solute and isotopic data are consistent with a sequence of episodic precipitation, concentration of solutes in upland soils by evapotranspiration, runoff, and infiltration beneath playas and ditches (modified locally by return flow of wastewater and irrigation tailwater). Plausible reactions during recharge include oxidation of organic matter, dissolution and exsolution of CO2, dissolution of CaCO3, silicate weathering, and cation exchange. Si and 14C data suggest leakage from perched aquifers to the High Plains aquifer. Plausible mass-balance models for the High Plains aquifer include scenarios of flow with leakage but not reactions, flow with reactions but not leakage, and flow with neither reactions nor leakage. Mechanisms of recharge and chemical evolution delineated in this study agree with those noted for other aquifers in the south-central and southwestern USA. Résumé. L'aquifère libre des Hautes Plaines (Ogallala) est le plus vaste aquifère des états-Unis et la ressource de base pour l'eau potable de la région semi-aride du sud des Hautes Plaines du Texas et du Nouveau-Mexique. Des analyses de l'eau et des sols prélevés au nord-est d'Amarillo (Texas), associées à des données provenant d'autres études dans cette région, indiquent que des processus intervenant au cours de l'infiltration contrôlent la composition de l'eau de la nappe libre dans la moitié septentrionale du sud des Hautes Plaines. Les données chimiques et isotopiques sont compatibles avec une séquence de précipitation épisodique, avec la reconcentration en solutés dans les sols des hautes terres par évapotranspiration, avec le ruissellement et l'infiltration dans les playas et les fossés (modifiée localement par l'écoulement en retour des eaux usées et des laisses d'irrigation). Des réactions probables intervenant au cours de la recharge sont l'oxydation de la matière organique, la dissolution et le dégazage du CO2, la dissolution du CaCO3, l'altération des silicates et l'échange de cations. Les données concernant Si et 14C laissent penser qu'il existe une drainance descendante à partir d'aquifères perchés vers l'aquifère des Hautes Plaines. Des modèles vraisemblables de bilan de matière pour l'aquifère des Hautes Plaines prennent en compte des scénarios d'écoulement avec drainance mais sans réactions, des écoulements avec réactions mais sans drainance et des écoulements sans réactions ni drainance. Les mécanismes de recharge et d'évolution chimique déterminés dans cette étude sont en accord avec ceux mis en évidence dans d'autres aquifères du centre sud et du sud-ouest des états-Unis. Resumen. El acuífero libre de High Plains (Ogallala) es el mayor de los Estados Unidos y supone la fuente principal de abastecimiento en la región semiárida del sur de High Plains (Texas) y de Nuevo México. Los análisis de agua y suelos realizados al nordeste de Amarillo (Texas), junto con los datos de otros estudios regionales, indican que los procesos que tienen lugar durante la recarga del acuífero controlan la composición de las aguas subterráneas en la mitad septentrional de los High Plains del Sur. Los datos isotópicos y hidroquímicos son coherentes con una secuencia de episodios de precipitación, concentración de solutos en la parte superior del suelo por evapotranspiración, escorrentía, e infiltración a través de 'playas' y zanjas (modificadas localmente por los flujos de retorno de aguas residuales y de excedentes de riego).

Etude numerique et experimentale de la reponse vibro-acoustique des structures raidies a des excitations aeriennes et solidiennes

NASA Astrophysics Data System (ADS)

Mejdi, Abderrazak

Les fuselages des avions sont generalement en aluminium ou en composite renforces par des raidisseurs longitudinaux (lisses) et transversaux (cadres). Les raidisseurs peuvent etre metalliques ou en composite. Durant leurs differentes phases de vol, les structures d'avions sont soumises a des excitations aeriennes (couche limite turbulente : TBL, champs diffus : DAF) sur la peau exterieure dont l'energie acoustique produite se transmet a l'interieur de la cabine. Les moteurs, montes sur la structure, produisent une excitation solidienne significative. Ce projet a pour objectifs de developper et de mettre en place des strategies de modelisations des fuselages d'avions soumises a des excitations aeriennes et solidiennes. Tous d'abord, une mise a jour des modeles existants de la TBL apparait dans le deuxieme chapitre afin de mieux les classer. Les proprietes de la reponse vibro-acoustique des structures planes finies et infinies sont analysees. Dans le troisieme chapitre, les hypotheses sur lesquelles sont bases les modeles existants concernant les structures metalliques orthogonalement raidies soumises a des excitations mecaniques, DAF et TBL sont reexamines en premier lieu. Ensuite, une modelisation fine et fiable de ces structures est developpee. Le modele est valide numeriquement a l'aide des methodes des elements finis (FEM) et de frontiere (BEM). Des tests de validations experimentales sont realises sur des panneaux d'avions fournis par des societes aeronautiques. Au quatrieme chapitre, une extension vers les structures composites renforcees par des raidisseurs aussi en composites et de formes complexes est etablie. Un modele analytique simple est egalement implemente et valide numeriquement. Au cinquieme chapitre, la modelisation des structures raidies periodiques en composites est beaucoup plus raffinee par la prise en compte des effets de couplage des deplacements planes et transversaux. L'effet de taille des structures finies periodiques est egalement pris en compte. Les modeles developpes ont permis de conduire plusieurs etudes parametriques sur les proprietes vibro-acoustiques des structures d'avions facilitant ainsi la tache des concepteurs. Dans le cadre de cette these, un article a ete publie dans le Journal of Sound and Vibration et trois autres soumis, respectivement aux Journal of Acoustical Society of America, International Journal of Solid Mechanics et au Journal of Sound and Vibration Mots cles : structures raidies, composites, vibro-acoustique, perte par transmission.

Current knowledge on groundwater microbial pathogens and their control

NASA Astrophysics Data System (ADS)

Macler, Bruce A.; Merkle, Jon C.

Those who drink groundwater that has not been disinfected are at increased risk of infection and disease from pathogenic microorganisms. Recent studies have shown that up to half of all US drinking-water wells tested had evidence of fecal contamination. A significant fraction of all waterborne disease outbreaks is associated with groundwater. An estimated 750,000 to 5.9million illnesses per year result from contaminated groundwaters in the US. Mortality from these illnesses may be 1400-9400 deaths per year. Control of these pathogens starts with source-water protection activities to prevent fecal contamination of aquifers and wells. These include assessment of wellhead vulnerability to fecal contamination and correction of identified deficiencies. Correction may include control of sources or rehabilitation of the well itself. Disinfection can serve as a useful barrier and is recommended as a prudent public-health policy for all groundwater systems. Ceux qui boivent une eau souterraine non désinfectée présentent un risque accru d'infection et de maladie par des germes pathogènes. De récentes études ont montré que près de la moitié de tous les puits américains testés, captés pour l'eau potable, sont soumis à une contamination fécale. Une fraction significative de l'ensemble des premières manifestations de maladies liées à l'eau est associée aux eaux souterraines. On estime qu'entre 750 000 et 5,9millions de personnes sont malades chaque année aux États-Unis à cause d'eaux souterraines polluées. La mortalité parmi ces malades doit ètre de l'ordre de 1400 à 9400 décès par an. La protection contre ces germes pathogènes commence avec des mesures prises au niveau du captage pour empècher la pollution des aquifères et des puits. Celles-ci comprennent une évaluation de la vulnérabilité des tètes de puits à la pollution fécale et une correction des insuffisances mises en évidence. Cette correction peut comprendre une maîtrise des sources de pollution ou la réhabilitation du puits lui-mème. La désinfection peut ètre une précaution utile et est recommandée comme une mesure prudente de santé publique pour toutes les nappes aquifères. Beber agua subterránea no desinfectada supone un riesgo de infección por microorganismos patógenos. Estudios recientes muestran que la mitad de los pozos de abastecimiento analizados en los EEUU presentan evidencia de contaminación fecal. Un porcentaje significativo de la aparición de enfermedades transmitidas por el agua puede asociarse a las aguas subterráneas, estimándose que por contaminación de las mismas se registran, sólo en ese país, entre 750.000 y 5.9millones de personas enfermas y entre 1400-9400 muertos por año. El control de estos patógenos empieza con la protección de la fuente para prevenir la contaminación fecal de pozos y acuíferos. Esto supone evaluar la vulnerabilidad y corregir las posibles deficiencias detectadas, lo que incluye controlar los trabajos de rehabilitación del propio pozo. La desinfección puede servir como una barrera a los microorganismos patógenos, por lo que se recomienda como una política prudente de salud pública en zonas abastecidas con aguas subterráneas.

Retour vers le futur: l'expérience des patients et le lien avec la qualité, la sécurité et le rendement financier.

PubMed

Cochrane, Bonnie S; Hagins, Mitch; King, John A; Picciano, Gino; McCafferty, Maureen M; Nelson, Brian

2015-11-01

Au Canada, l'amélioration de l'expérience des patients est devenue une priorité des politiques de santé. Le perfectionnement et la normalisation des outils et systèmes pour surveiller les mesures de l'expérience des patients augmentent, tandis que la tendance vers une plus grande reddition de compte sur des améliorations durables et abordables se confirme. Pour de nombreux professionnels de la santé, ce phénomène fait foi d'un intérêt renouvelé pour les besoins et priorités fondamentaux des patients, après des décennies où les changements structurels et technologiques ont dominé les programmes de santé. Pour les leaders en santé canadiens, l'amélioration de l'expérience des patients comporte actuellement de grands défis et de belles possibilités. À cet égard, l'expérience des organisations partenaires du groupe Studer au Canada est à la fois pertinente et instructive. Ces organisations ont adopté un modèle, du nom de Evidence-Based Leadership (EBL, ou leadership fondé sur des données probantes), qui favorise et soutient l'harmonisation de l'ensemble des activités et des comportements, conformément à des objectifs organisationnels précis, y compris des améliorations mesurables de l'expérience des patients. Le présent article expose des études de cas d'organisations qui ont adopté l'EBL. Ces organisations ont réalisé des progrès rapides en matière d'indicateurs de l'expérience des patients, ainsi que dans des secteurs essentiels comme les résultats cliniques, la sécurité et le rendement financier. Les données émergentes sur les facteurs et processus qui sous-tendent ces améliorations sont également abordées. © 2015 Collège canadien des leaders en santé

Drug‐coated balloons for de novo lesions in small coronary arteries: rationale and design of BASKET‐SMALL 2

PubMed Central

Gilgen, Nicole; Farah, Ahmed; Scheller, Bruno; Ohlow, Marc‐Alexander; Mangner, Norman; Weilenmann, Daniel; Wöhrle, Jochen; Jamshidi, Peiman; Leibundgut, Gregor; Möbius‐Winkler, Sven; Zweiker, Robert; Krackhardt, Florian; Butter, Christian; Bruch, Leonhard; Kaiser, Christoph; Hoffmann, Andreas; Rickenbacher, Peter; Mueller, Christian; Stephan, Frank‐Peter; Coslovsky, Michael

2018-01-01

The treatment of coronary small vessel disease (SVD) remains an unresolved issue. Drug‐eluting stents (DES) have limited efficacy due to increased rates of instent‐restenosis, mainly caused by late lumen loss. Drug‐coated balloons (DCB) are a promising technique because native vessels remain structurally unchanged. Basel Stent Kosten‐Effektivitäts Trial: Drug‐Coated Balloons vs. Drug‐Eluting Stents in Small Vessel Interventions (BASKET‐SMALL 2) is a multicenter, randomized, controlled, noninferiority trial of DCB vs DES in native SVD for clinical endpoints. Seven hundred fifty‐eight patients with de novo lesions in vessels <3 mm in diameter and an indication for percutaneous coronary intervention such as stable angina pectoris, silent ischemia, or acute coronary syndromes are randomized 1:1 to angioplasty with DCB vs implantation of a DES after successful initial balloon angioplasty. The primary endpoint is the combination of cardiac death, nonfatal myocardial infarction, and target‐vessel revascularization up to 1 year. Secondary endpoints include stent thrombosis, Bleeding Academic Research Consortium (BARC) type 3 to 5 bleeding, and long‐term outcome up to 3 years. Based on clinical endpoints after 1 year, we plan to assess the noninferiority of DCB compared to DES in patients undergoing primary percutaneous coronary intervention for SVD. Results will be available in the second half of 2018. This study will compare DCB and DES regarding long‐term safety and efficacy for the treatment of SVD in a large all‐comer population. PMID:29527709

Sécurité au-delà des mythes et des croyances [Security beyond myths and beliefs

ScienceCinema

Koch, Stephane

2018-04-26

Présentation orale en français, support visuel en français et en anglais. La pire des failles de sécurité est l'impression de sécurité. Le décalage entre la compréhension que l’on a des technologies utilisées, et leurs potentiels réels, ainsi que l'impact potentiellement négatif qu'elles peuvent avoir sur nos vies, n'est pas toujours compris, ou pris en compte par la plupart d'entre-nous. On se contente de nos perceptions pour ne pas avoir à se confronter à la réalité... Alors qu'en est-il vraiment ? En matière de sécurité qui de l'humain ou des technologies a le contrôle ? [Oral presentation in French, visual support in French and English. The worst security breach and the impression of security. The gap between our understanding of the technologies used, and their actual potentials, as well as the potentially negative impact they may have on our lives, is not always understood, or taken into account by most of us. We are content with our perceptions to avoid having to confront the reality ... So what is it really? In terms of security is it humans or technology which has control?

Cold pearl surfactant-based blends.

PubMed

Crombie, R L

1997-10-01

Pearlizing agents have been used for many years in cosmetic formulations to add a pearlescent effect. Cold pearl surfactant-based blends are mixtures of glycol stearates and surfactants which can be blended in the cold into a wide range of personal-care formulations to create a pearlescent lustre effect. Under controlled manufacturing conditions constant viscosities and crystalline characteristics can be obtained. The development of these blends has been driven by efforts to improve the economics of adding solid pearlizing agents directly into a hot mix formulation. This paper summarizes the history of pearlizers, describes their advantages and physical chemistry of the manufacturing process. Finally some suggestions for applications are given. Les agents nacrants sont utilises depuis de nombreuses annees dans les formulations cosmetiques pour ajouter un effet nacre. Les melanges a froid a base de tensioactif nacre sont des melanges de stearates de glycol et de tensioactifs qui peuvent etre melanges a froid dans une large gamme de formulations d'hygiene personnelle pour creer un effet de lustre nacre. On peut obtenir des viscosites et des proprietes cristallines constantes avec des conditions de fabrication maitrisees. Le developpement de ces melanges a ete porte par les efforts pour ameliorer les couts de l'ajout d'agents nacrants solides directement dans une formulation melangee de l'ajout d'agents nacrants solides directement dans une formulation melangee a chaud. Cet article resume l'histoire des agents nacrants, decrit leurs avantages et al physico-chimie du procede de fabrication. On emet a la fin cetaines suggestions d'applications.

Prédiction du comportement à long terme des matériaux polymères

NASA Astrophysics Data System (ADS)

Lemaire, J.

1998-06-01

Most of the world activity on research, development and control of polymer durability is still based on empirical techniques developed in the early ages of polymer uses. Those techniques should be critically analysed considering the state of the art in the fundamental understanding of these complex phenomena. A more rational approach is described, especially to predict the lifetime of polymeric materials in environmental conditions. That approach is based on the recognition of the chemical evolution mechanisms. Les activités de recherche, développement et contrôle de durabilité des matériaux polymères sont encore, pour une part très importante, basées sur l'emploi de techniques empiriques dont les principes ont été énoncés dès le début de l'exploitation de ces matériaux. Une analyse critique de ces méthodes s'impose aujourd'hui en tenant compte de l'avancement des connaissances. Une approche plus rationnelle est décrite, approche basée sur la reconnaissance des mécanismes d'évolution chimique. A titre d'exemple, le mécanisme d'évolution du PVC sous contraintes conjuguées de l'UV, de la chaleur et de l'oxygène, est décrit. Des études récentes de photooxydation de polymères conducteurs au sein de polyéthylène sont également succinctement rapportées.

Integration of Monte-Carlo ray tracing with a stochastic optimisation method: application to the design of solar receiver geometry.

PubMed

Asselineau, Charles-Alexis; Zapata, Jose; Pye, John

2015-06-01

A stochastic optimisation method adapted to illumination and radiative heat transfer problems involving Monte-Carlo ray-tracing is presented. A solar receiver shape optimisation case study illustrates the advantages of the method and its potential: efficient receivers are identified using a moderate computational cost.

Scenario-based, closed-loop model predictive control with application to emergency vehicle scheduling

NASA Astrophysics Data System (ADS)

Goodwin, Graham. C.; Medioli, Adrian. M.

2013-08-01

Model predictive control has been a major success story in process control. More recently, the methodology has been used in other contexts, including automotive engine control, power electronics and telecommunications. Most applications focus on set-point tracking and use single-sequence optimisation. Here we consider an alternative class of problems motivated by the scheduling of emergency vehicles. Here disturbances are the dominant feature. We develop a novel closed-loop model predictive control strategy aimed at this class of problems. We motivate, and illustrate, the ideas via the problem of fluid deployment of ambulance resources.

EDUCATION, CHILDREN AND COMFORT.

ERIC Educational Resources Information Center

Iowa Univ., Iowa City.

TWO SIMILAR CLASSROOMS WERE SET UP IN THE LENNOX LIVING LABORATORY, DES MOINES, IOWA, ONE FOR EXPERIMENTAL GROUPS AND ONE FOR CONTROL GROUPS. TEMPERATURE, AIR CIRCULATION AND HUMIDITY CAN BE CONTROLLED AND MEASURED IN BOTH ROOMS. THE ROOMS ARE OF SIMILAR SIZE, LAYOUT AND CONSTRUCTION, THE THERMAL ENVIRONMENT BEING THE ONLY VARIABLE. THE FOLLOWING…

77 FR 729 - Airworthiness Directives; Enstrom Helicopter Corporation Helicopters

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-06

... subsequent loss of control of the helicopter. DATES: This AD becomes effective January 23, 2012. The Director... Program Manager, FAA, Chicago Aircraft Certification Office, 2300 East Devon Avenue, Room 107, Des Plaines... the circuit breaker to trip before any significant loss of control occurs. After the trim actuator...

75 FR 24865 - Notice of Contract Proposal (NOCP) for Payments to Eligible Advanced Biofuel Producers

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-06

... Teresa Bomhoff, USDA Rural Development, 873 Federal Building, 210 Walnut Street, Des Moines, IA 50309... and Budget (OMB) under OMB Control Number 0570-0057. The PRA burden associated with the original... Control Number 0570-0057. Overview Information Federal Agency Name. Rural Business-Cooperative Service...

Topology optimisation for natural convection problems

NASA Astrophysics Data System (ADS)

Alexandersen, Joe; Aage, Niels; Andreasen, Casper Schousboe; Sigmund, Ole

2014-12-01

This paper demonstrates the application of the density-based topology optimisation approach for the design of heat sinks and micropumps based on natural convection effects. The problems are modelled under the assumptions of steady-state laminar flow using the incompressible Navier-Stokes equations coupled to the convection-diffusion equation through the Boussinesq approximation. In order to facilitate topology optimisation, the Brinkman approach is taken to penalise velocities inside the solid domain and the effective thermal conductivity is interpolated in order to accommodate differences in thermal conductivity of the solid and fluid phases. The governing equations are discretised using stabilised finite elements and topology optimisation is performed for two different problems using discrete adjoint sensitivity analysis. The study shows that topology optimisation is a viable approach for designing heat sink geometries cooled by natural convection and micropumps powered by natural convection.

Discrimination Power Control for Adaptive Target Tracking Applications

DTIC Science & Technology

2008-07-01

represented by the Minister of National Defence, 2008 c© Sa Majesté la Reine (en droit du Canada), telle que représentée par le ministre de la Défense...classification. Résumé Le travail présenté dans ce rapport porte sur le problème de la capacité discriminatoire dans des applications de pistage de cibles...objectifs d’une mission. La stratégie de contrôle est basée sur deux boucles imbriquées. La boucle externe utilise des techniques de regroupement de

General Reevaluation Report for Flood Control Project: Raccoon River and Walnut Creek, West Des Moines-Des Moines, Iowa with Final Supplement Number 1 to the Final Environmental Impact Statement

DTIC Science & Technology

1989-07-01

to the FINAL ENVIRONMENTAL IMPACT STATEMENT D T C EIECTE SMAR 1 41990 US Army Corps of Engineers Rock Island District JULY 1989 S03� 1601...SUPPLEMENT NO. 1 TO THE FINAL ENVIRONMENTAL IMPACT STATEMENT NTIS z ITIC Av’, < , r Dist JULY 1989 TECHNICAL CONTRIBUTORS Primary study team personnel who are...AND COMMENTS 45 SECTION 6 - RECOMMENDATIONS 46 List of Tables No. Title Page 1 Impacts of Levee on Raccoon River Profiles 20 2 Impacts of Levee on

A supportive architecture for CFD-based design optimisation

NASA Astrophysics Data System (ADS)

Li, Ni; Su, Zeya; Bi, Zhuming; Tian, Chao; Ren, Zhiming; Gong, Guanghong

2014-03-01

Multi-disciplinary design optimisation (MDO) is one of critical methodologies to the implementation of enterprise systems (ES). MDO requiring the analysis of fluid dynamics raises a special challenge due to its extremely intensive computation. The rapid development of computational fluid dynamic (CFD) technique has caused a rise of its applications in various fields. Especially for the exterior designs of vehicles, CFD has become one of the three main design tools comparable to analytical approaches and wind tunnel experiments. CFD-based design optimisation is an effective way to achieve the desired performance under the given constraints. However, due to the complexity of CFD, integrating with CFD analysis in an intelligent optimisation algorithm is not straightforward. It is a challenge to solve a CFD-based design problem, which is usually with high dimensions, and multiple objectives and constraints. It is desirable to have an integrated architecture for CFD-based design optimisation. However, our review on existing works has found that very few researchers have studied on the assistive tools to facilitate CFD-based design optimisation. In the paper, a multi-layer architecture and a general procedure are proposed to integrate different CFD toolsets with intelligent optimisation algorithms, parallel computing technique and other techniques for efficient computation. In the proposed architecture, the integration is performed either at the code level or data level to fully utilise the capabilities of different assistive tools. Two intelligent algorithms are developed and embedded with parallel computing. These algorithms, together with the supportive architecture, lay a solid foundation for various applications of CFD-based design optimisation. To illustrate the effectiveness of the proposed architecture and algorithms, the case studies on aerodynamic shape design of a hypersonic cruising vehicle are provided, and the result has shown that the proposed architecture and developed algorithms have performed successfully and efficiently in dealing with the design optimisation with over 200 design variables.

Design and Optimization of Wings in Subsonic and Transonic Regime

DTIC Science & Technology

2000-06-01

transici6n libre. In tinizaci6n. In 3 "r Congreso de M~todos Numie icos V Encontro Nacional de Mecanica Computacional, en Ingenierina, Zaragoza, Junio...aerodinisicos definidos mediante poll- and optimisation by means of control theory. In nomios de B[zier. In V Encontro Nacional de IV World Congress

Optimisation of logistics processes of energy grass collection

NASA Astrophysics Data System (ADS)

Bányai, Tamás.

2010-05-01

The collection of energy grass is a logistics-intensive process [1]. The optimal design and control of transportation and collection subprocesses is a critical point of the supply chain. To avoid irresponsible decisions by right of experience and intuition, the optimisation and analysis of collection processes based on mathematical models and methods is the scientific suggestible way. Within the frame of this work, the author focuses on the optimisation possibilities of the collection processes, especially from the point of view transportation and related warehousing operations. However the developed optimisation methods in the literature [2] take into account the harvesting processes, county-specific yields, transportation distances, erosion constraints, machinery specifications, and other key variables, but the possibility of more collection points and the multi-level collection were not taken into consideration. The possible areas of using energy grass is very wide (energetically use, biogas and bio alcohol production, paper and textile industry, industrial fibre material, foddering purposes, biological soil protection [3], etc.), so not only a single level but also a multi-level collection system with more collection and production facilities has to be taken into consideration. The input parameters of the optimisation problem are the followings: total amount of energy grass to be harvested in each region; specific facility costs of collection, warehousing and production units; specific costs of transportation resources; pre-scheduling of harvesting process; specific transportation and warehousing costs; pre-scheduling of processing of energy grass at each facility (exclusive warehousing). The model take into consideration the following assumptions: (1) cooperative relation among processing and production facilties, (2) capacity constraints are not ignored, (3) the cost function of transportation is non-linear, (4) the drivers conditions are ignored. The objective function of the optimisation is the maximisation of the profit which means the maximization of the difference between revenue and cost. The objective function trades off the income of the assigned transportation demands against the logistic costs. The constraints are the followings: (1) the free capacity of the assigned transportation resource is more than the re-quested capacity of the transportation demand; the calculated arrival time of the transportation resource to the harvesting place is not later than the requested arrival time of them; (3) the calculated arrival time of the transportation demand to the processing and production facility is not later than the requested arrival time; (4) one transportation demand is assigned to one transportation resource and one resource is assigned to one transportation resource. The decision variable of the optimisation problem is the set of scheduling variables and the assignment of resources to transportation demands. The evaluation parameters of the optimised system are the followings: total costs of the collection process; utilisation of transportation resources and warehouses; efficiency of production and/or processing facilities. However the multidimensional heuristic optimisation method is based on genetic algorithm, but the routing sequence of the optimisation works on the base of an ant colony algorithm. The optimal routes are calculated by the aid of the ant colony algorithm as a subroutine of the global optimisation method and the optimal assignment is given by the genetic algorithm. One important part of the mathematical method is the sensibility analysis of the objective function, which shows the influence rate of the different input parameters. Acknowledgements This research was implemented within the frame of the project entitled "Development and operation of the Technology and Knowledge Transfer Centre of the University of Miskolc". with support by the European Union and co-funding of the European Social Fund. References [1] P. R. Daniel: The Economics of Harvesting and Transporting Corn Stover for Conversion to Fuel Ethanol: A Case Study for Minnesota. University of Minnesota, Department of Applied Economics. 2006. http://ideas.repec.org/p/ags/umaesp/14213.html [2] T. G. Douglas, J. Brendan, D. Erin & V.-D. Becca: Energy and Chemicals from Native Grasses: Production, Transportation and Processing Technologies Considered in the Northern Great Plains. University of Minnesota, Department of Applied Economics. 2006. http://ideas.repec.org/p/ags/umaesp/13838.html [3] Homepage of energygrass. www.energiafu.hu

Assessing the lipophilicity of fragments and early hits

NASA Astrophysics Data System (ADS)

Mortenson, Paul N.; Murray, Christopher W.

2011-07-01

A key challenge in many drug discovery programs is to accurately assess the potential value of screening hits. This is particularly true in fragment-based drug design (FBDD), where the hits often bind relatively weakly, but are correspondingly small. Ligand efficiency (LE) considers both the potency and the size of the molecule, and enables us to estimate whether or not an initial hit is likely to be optimisable to a potent, druglike lead. While size is a key property that needs to be controlled in a small molecule drug, there are a number of additional properties that should also be considered. Lipophilicity is amongst the most important of these additional properties, and here we present a new efficiency index (LLEAT) that combines lipophilicity, size and potency. The index is intuitively defined, and has been designed to have the same target value and dynamic range as LE, making it easily interpretable by medicinal chemists. Monitoring both LE and LLEAT should help both in the selection of more promising fragment hits, and controlling molecular weight and lipophilicity during optimisation.

Controlling interferometric properties of nanoporous anodic aluminium oxide

PubMed Central

2012-01-01

A study of reflective interference spectroscopy [RIfS] properties of nanoporous anodic aluminium oxide [AAO] with the aim to develop a reliable substrate for label-free optical biosensing is presented. The influence of structural parameters of AAO including pore diameters, inter-pore distance, pore length, and surface modification by deposition of Au, Ag, Cr, Pt, Ni, and TiO2 on the RIfS signal (Fabry-Perot fringe) was explored. AAO with controlled pore dimensions was prepared by electrochemical anodization of aluminium using 0.3 M oxalic acid at different voltages (30 to 70 V) and anodization times (10 to 60 min). Results show the strong influence of pore structures and surface modifications on the interference signal and indicate the importance of optimisation of AAO pore structures for RIfS sensing. The pore length/pore diameter aspect ratio of AAO was identified as a suitable parameter to tune interferometric properties of AAO. Finally, the application of AAO with optimised pore structures for sensing of a surface binding reaction of alkanethiols (mercaptoundecanoic acid) on gold surface is demonstrated. PMID:22280884

Advanced data management for optimising the operation of a full-scale WWTP.

PubMed

Beltrán, Sergio; Maiza, Mikel; de la Sota, Alejandro; Villanueva, José María; Ayesa, Eduardo

2012-01-01

The lack of appropriate data management tools is presently a limiting factor for a broader implementation and a more efficient use of sensors and analysers, monitoring systems and process controllers in wastewater treatment plants (WWTPs). This paper presents a technical solution for advanced data management of a full-scale WWTP. The solution is based on an efficient and intelligent use of the plant data by a standard centralisation of the heterogeneous data acquired from different sources, effective data processing to extract adequate information, and a straightforward connection to other emerging tools focused on the operational optimisation of the plant such as advanced monitoring and control or dynamic simulators. A pilot study of the advanced data manager tool was designed and implemented in the Galindo-Bilbao WWTP. The results of the pilot study showed its potential for agile and intelligent plant data management by generating new enriched information combining data from different plant sources, facilitating the connection of operational support systems, and developing automatic plots and trends of simulated results and actual data for plant performance and diagnosis.

Laser surface texturing of cast iron steel: dramatic edge burr reduction and high speed process optimisation for industrial production using DPSS picosecond lasers

NASA Astrophysics Data System (ADS)

Bruneel, David; Kearsley, Andrew; Karnakis, Dimitris

2015-07-01

In this work we present picosecond DPSS laser surface texturing optimisation of automotive grade cast iron steel. This application attracts great interest, particularly in the automotive industry, to reduce friction between moving piston parts in car engines, in order to decrease fuel consumption. This is accomplished by partially covering with swallow microgrooves the inner surface of a piston liner and is currently a production process adopting much longer pulse (microsecond) DPSS lasers. Lubricated interface conditions of moving parts require from the laser process to produce a very strictly controlled surface topography around the laser formed grooves, whose edge burr height must be lower than 100 nm. To achieve such a strict tolerance, laser machining of cast iron steel was investigated using an infrared DPSS picosecond laser (10ps duration) with an output power of 16W and a repetition rate of 200 kHz. The ultrashort laser is believed to provide a much better thermal management of the etching process. All studies presented here were performed on flat samples in ambient air but the process is transferrable to cylindrical geometry engine liners. We will show that reducing significantly the edge burr below an acceptable limit for lubricated engine production is possible using such lasers and remarkably the process window lies at very high irradiated fluences much higher that the single pulse ablation threshold. This detailed experimental work highlights the close relationship between the optimised laser irradiation conditions as well as the process strategy with the final size of the undesirable edge burrs. The optimised process conditions are compatible with an industrial production process and show the potential for removing extra post)processing steps (honing, etc) of cylinder liners on the manufacturing line saving time and cost.

Simultaneous data pre-processing and SVM classification model selection based on a parallel genetic algorithm applied to spectroscopic data of olive oils.

PubMed

Devos, Olivier; Downey, Gerard; Duponchel, Ludovic

2014-04-01

Classification is an important task in chemometrics. For several years now, support vector machines (SVMs) have proven to be powerful for infrared spectral data classification. However such methods require optimisation of parameters in order to control the risk of overfitting and the complexity of the boundary. Furthermore, it is established that the prediction ability of classification models can be improved using pre-processing in order to remove unwanted variance in the spectra. In this paper we propose a new methodology based on genetic algorithm (GA) for the simultaneous optimisation of SVM parameters and pre-processing (GENOPT-SVM). The method has been tested for the discrimination of the geographical origin of Italian olive oil (Ligurian and non-Ligurian) on the basis of near infrared (NIR) or mid infrared (FTIR) spectra. Different classification models (PLS-DA, SVM with mean centre data, GENOPT-SVM) have been tested and statistically compared using McNemar's statistical test. For the two datasets, SVM with optimised pre-processing give models with higher accuracy than the one obtained with PLS-DA on pre-processed data. In the case of the NIR dataset, most of this accuracy improvement (86.3% compared with 82.8% for PLS-DA) occurred using only a single pre-processing step. For the FTIR dataset, three optimised pre-processing steps are required to obtain SVM model with significant accuracy improvement (82.2%) compared to the one obtained with PLS-DA (78.6%). Furthermore, this study demonstrates that even SVM models have to be developed on the basis of well-corrected spectral data in order to obtain higher classification rates. Copyright © 2013 Elsevier Ltd. All rights reserved.

Optimal bioprocess design through a gene regulatory network - growth kinetic hybrid model: Towards Replacing Monod kinetics.

PubMed

Tsipa, Argyro; Koutinas, Michalis; Usaku, Chonlatep; Mantalaris, Athanasios

2018-05-02

Currently, design and optimisation of biotechnological bioprocesses is performed either through exhaustive experimentation and/or with the use of empirical, unstructured growth kinetics models. Whereas, elaborate systems biology approaches have been recently explored, mixed-substrate utilisation is predominantly ignored despite its significance in enhancing bioprocess performance. Herein, bioprocess optimisation for an industrially-relevant bioremediation process involving a mixture of highly toxic substrates, m-xylene and toluene, was achieved through application of a novel experimental-modelling gene regulatory network - growth kinetic (GRN-GK) hybrid framework. The GRN model described the TOL and ortho-cleavage pathways in Pseudomonas putida mt-2 and captured the transcriptional kinetics expression patterns of the promoters. The GRN model informed the formulation of the growth kinetics model replacing the empirical and unstructured Monod kinetics. The GRN-GK framework's predictive capability and potential as a systematic optimal bioprocess design tool, was demonstrated by effectively predicting bioprocess performance, which was in agreement with experimental values, when compared to four commonly used models that deviated significantly from the experimental values. Significantly, a fed-batch biodegradation process was designed and optimised through the model-based control of TOL Pr promoter expression resulting in 61% and 60% enhanced pollutant removal and biomass formation, respectively, compared to the batch process. This provides strong evidence of model-based bioprocess optimisation at the gene level, rendering the GRN-GK framework as a novel and applicable approach to optimal bioprocess design. Finally, model analysis using global sensitivity analysis (GSA) suggests an alternative, systematic approach for model-driven strain modification for synthetic biology and metabolic engineering applications. Copyright © 2018. Published by Elsevier Inc.

Implications of the degree of controllability of controlled plants in the sense of LQR optimal control

NASA Astrophysics Data System (ADS)

Xia, Yaping; Yin, Minghui; Zou, Yun

2018-01-01

In this paper, the relationship between the degree of controllability (DOC) of controlled plants and the corresponding quadratic optimal performance index in LQR control is investigated for the electro-hydraulic synchronising servo control systems and wind turbine systems, respectively. It is shown that for these two types of systems, the higher the DOC of a controlled plant is, the better the quadratic optimal performance index is. It implies that in some LQR controller designs, the measure of the DOC of a controlled plant can be used as an index for the optimisation of adjustable plant parameters, by which the plant can be controlled more effectively.

Conception d'un capteur intelligent pour la détection des vapeurs de styrène dans l'industrie

NASA Astrophysics Data System (ADS)

Agbossou, Kodjo; Agbebavi, T. James; Koffi, Demagna; Elhiri, Mohammed

1994-10-01

The techniques of measurement of toxic gases are nowadays based on the semiconductor type sensors. The modelling and the electronic processing of their signals can be used to improve the accuracy and the efficiency of the measurement. In this paper, an intelligent system using a semiconductor sensor has been designed for the detection of the styrene vapors. A set of the environmental parameters sensors such as the temperature, the pressure and the humidity, is added to the basic sensor and allows a precise detection of the styrene vapors in air. A microcontroller and a communication interface, that are included in the control system and in the data processing system, provide the local intelligence. The linearization routines of the differents sensors are in the memory of the microcontroller. The system made of the sensors, of the amplification circuits, of the microcontroller and of the communication network between the smart sensor and the computer is analysed. A laboratory test of the device is presented and the accuracies and efficiencies of the differents sensors are given. Les techniques fiables de quantification des gaz polluants sont aujourd'hui basées sur l'utilisation des détecteurs à récepteurs chimiques et sur des capteurs à semiconducteurs. La modélisation et le traitement numérique des signaux résultants sont importants pour une mesure efficace et précise dans un milieu donné. Dans cet article, un capteur intelligent, utilisant un détecteur de gaz type semiconducteur a été réalisé pour la détection des vapeurs de styrène. Un ensemble de détecteurs des paramètres environnementaux, tels que la température, la pression et l'humidité, ajoutés au capteur de styrène, permettent de mesurer avec un bon contrôle les vapeurs de styrène dans l'air. Le système de contrôle et de gestion local des données est constitué d'un microcontrôleur et d'une interface de communication. Le microcontrôleur contient dans sa mémoire toutes les fonctions de linéarisation des différents capteurs. Cet ensemble de capteurs, de circuits conditionneurs, de microcontrôleur et d'interface de communication est appelé " capteur intelligent ". Le réseau de communication entre le capteur intelligent et le micro-ordinateur est analysé en terme de traitement de signal. Un exemple d'application au laboratoire est présenté, les sensibilités et les précisions des différents capteurs sont données.

Preface: Materiaux 2010

NASA Astrophysics Data System (ADS)

Cheikhrouhou, Abdelwaheb

2012-02-01

The national conference 'MATERIAUX 2010', which took place in Mahdia (Tunisia), from 4-7 November 2010 was organized by The 'Tunisian Materials Research Society: Tu-MRS' in collaboration with the Materials Physics Laboratory of Sfax 'LPM', Faculty of Sciences, Sfax University and the Research Unit ' Physique, Informatique et Mathématiques ', Faculty of Sciences, Gafsa University The First National Conference on Materials 'MATERIAUX 2006' was organized in Douz (Tunisia) in December 2006. This was followed by 'MATERIAUX 2007' held in Hammamet (Tunisia) in April 2007 and the National Conference 'MATERIAUX 2009' organized jointly with the Second 'Journées Internationales de la Physique des Matériaux et Applications: JIPMA 2009' in Gafsa (Tunisia) from 20-24 December 2009. 'MATERIAUX 2010' is intended to provide an excellent opportunity for National, Maghreb and International researchers to make their own work on materials known to a wider audience and to have discussions with other participants. This conference will also be an opportunity to exchange experiences, create and consolidate cooperation between different research structures in the Maghreb countries and also the countries around the Mediterranean. This conference will equally promote research development, contribution to collaboration between universities and the socio-economical milieu. More than 300 senior researchers, Professors, PhD and Masters students attended this conference from Tunisia, Algeria, Morocco, France, Spain and Canada. Several researchers, engineers and managers from industrial firms also attended. The conference consisted of plenary talks (8), oral contributions (40) and poster presentations (250). The topics of the Conference were: Nano-materials, nano-systems, thin films, surfaces and interfaces, applications Multifunctionnal materials, magnetic materials, dielectric materials, superconducting materials, applications,... Materials for electronics, informatics and communication Ceramics, glasses, polymers Natural materials (phosphates, clay,...) Metallic materials, alloys, metallurgy,... Others (materials and environment, materials and energy, biomaterials,...) I want to thank the scientific committee, the organizing committee, the local committee and everyone who contributed to the organization of this meeting for their invaluable efforts in order to guarantee the complete success of this conference. Abdelwaheb Cheikhrouhou President of 'Tu-MRS' Chairman of the Conference 'MATERIAUX 2010' Conference photograph Committies Organizing Committee Chairman CHEIKHROUHOU Abdelwaheb (Faculté des Sciences de Sfax) Members ALAYA Sahbi (Faculté des Sciences de Gabès) BENNACEUR Raouf (Faculté des Sciences de Tunis) BEN SALEM Mohamed (Faculté des Sciences de Bizerte) CHEIKHROUHOU-KOUBAA Wissem (Faculté des Sciences de Sfax) EL JANI Belgacem (Faculté des Sciences de Monastir) EZZAOUIA Hatem (Centre de Recherches et de Technologies de l'Energie, Technopole de Borj Cédria) LAMLOUMI Jilani (Ecole Supérieure des Sciences et Techniques de Tunis) REZIG Bahri (Ecole Nationale d'Ingénieurs de Tunis) Local Committee Chairman CHEIKHROUHOU Abdelwaheb (Faculté des Sciences de Sfax) Members CHEIKHROUHOU-KOUBAA Wissem (Faculté des Sciences de Sfax) KOUBAA Mohamed (Institut Supérieur de Biotechnologie de Sfax) NJEH Anwar (Institut Préparatoire aux Etudes d'Ingénieurs de Sfax) BEN SALAH Issam (Faculté des Sciences de Sfax) TAKKALI Férid (Faculté des Sciences de Sfax) REGAIEG Yassin (Faculté des Sciences de Sfax) OTHMANI Safa (Faculté des Sciences de Sfax) MNASSRI Rafik (Faculté des Sciences de Sfax) Secretariat BEN GHOZLEN Afifa (Faculté des Sciences de Sfax) BOUGHARIOU Sana (Faculté des Sciences de Sfax) Scientific Committee M. ADDOU, Faculté des Sciences de Kénitra (Morocco) N. AMDOUNI, Faculté des Sciences de Tunis (Tunisia) M. BACCOUCHE, Faculté des Sciences d'Annaba (Algeria) H. BATIS, Faculté des Sciences de Tunis (Tunisia) A. BELAFHAL, Faculté des Sciences d'El Jadida (Morocco) M.H. BEN GHOZLEN, Faculté des Sciences de Sfax (Tunisia) R. BENNACEUR, Faculté des Sciences de Tunis (Tunisia) B. BENYOUCEF, Université Abou Bakr Belkaid, Tlemcen (Algeria) M. BEN SALEM, Faculté des Sciences de Bizerte (Tunisia) B. BESSAIES, Centre de Recherches et Technologies de l'Energie (Tunisia) H. BOUCHRIHA, Faculté des Sciences de Tunis (Tunisia) W. BOUJELBEN, Faculté des Sciences de Sfax (Tunisia) A. CHEIKHROUHOU, Faculté des Sciences de Sfax (Tunisia) W. CHEIKHROUHOU-KOUBAA, Faculté des Sciences de Sfax (Tunisia) R. CHTOUROU, Centre de Recherches et Technologies de l'Energie (Tunisia) M. DEBBABI, Ecole Nationale d'Ingénieurs de Monastir (Tunisia) A. DAKHLAOUI, Faculté des Sciences de Bizerte (Tunisia) A. DINIA, Université de Strasbourg (France) B. ELJANI, Faculté des Sciences de Monastir (Tunisia) A. ELJAZOULI, Faculté des Sciences Ben Msik, Casablanca (Morocco) Z. FAKHFAKH, Faculté des Sciences de Sfax (Tunisia) A. GASMI, Faculté des Sciences d'Annaba (Algeria) A. GHARBI, Faculté des Sciences de Tunis (Tunisia) R. GHARBI, Faculté des Sciences de Sfax (Tunisia) K. GUIDARA, Faculté des Sciences de Sfax (Tunisia) H. GUERMAZI, Institut Préparatoire aux Etudes d'Ingénieurs de Sfax (Tunisia) S. GUERMAZI, Faculté des Sciences de Sfax (Tunisia) M. HADDAD, Faculté des Sciences de Meknès (Morocco) A. HAJ AMARA, Faculté des Sciences de Bizerte (Tunisia) D. HAMANA, Faculté des Sciences de Constantine (Algeria) N. KAMOUN, Faculté des Sciences de Tunis (Tunisia) S. KADDOUR-CHARFI, Faculté des Sciences de Tunis (Tunisia) M. KADDOUR, Faculté des Sciences de Sfax (Tunisia) M. KHITOUNI, Faculté des Sciences de Sfax (Tunisia) T. MHIRI, Faculté des Sciences de Sfax (Tunisia) Y. MLIK, Institut Préparatoire aux Etudes Scientifiques et Techniques (Tunisia) N. MLIKI, Faculté des Sciences de Tunis (Tunisia) A. NJAH, Faculté des Sciences de Gafsa (Tunisia) M. OUESLATI, Faculté des Sciences de Tunis (Tunisia) K. ZELLAMA, Faculté des Sciences d'Amiens (France) Invited Speakers AMMAR-MERIAH Souad, ITODYS, Université Paris Diderot (France) BEN SALEM Mohamed, Faculté des Sciences de Bizerte, Université du 7 Novembre á Carthage (Tunisia) CHEIKHROUHOU Abdelwaheb, Faculté des Sciences de Sfax, Université de Sfax (Tunisia) DAKHLAOUI Amel, Faculté des Sciences de Bizerte, Université du 7 Novembre á Carthage (Tunisia) DJABBAR Ahmed, Université des Sciences et des Technologies de Lille (France) DURASTANTI Félix, Centre d'Etudes et Recherche en Thermique, Environnement et Systèmes (C.E.R.T.E.S.), Université Paris Est- Créteil (France) FERY-FORGUES Suzanne, Université Paul Sabatier, Toulouse (France) GIRAUD Romain, Laboratoire de Photonique et de Nanostructures, CNRS/LPN, Marcoussis (France)

Optimisation of SOA-REAMs for hybrid DWDM-TDMA PON applications.

PubMed

Naughton, Alan; Antony, Cleitus; Ossieur, Peter; Porto, Stefano; Talli, Giuseppe; Townsend, Paul D

2011-12-12

We demonstrate how loss-optimised, gain-saturated SOA-REAM based reflective modulators can reduce the burst to burst power variations due to differential access loss in the upstream path in carrier distributed passive optical networks by 18 dB compared to fixed linear gain modulators. We also show that the loss optimised device has a high tolerance to input power variations and can operate in deep saturation with minimal patterning penalties. Finally, we demonstrate that an optimised device can operate across the C-Band and also over a transmission distance of 80 km. © 2011 Optical Society of America

Systems Biology of Recombinant Protein Production in Bacillus megaterium

NASA Astrophysics Data System (ADS)

Biedendieck, Rebekka; Bunk, Boyke; Fürch, Tobias; Franco-Lara, Ezequiel; Jahn, Martina; Jahn, Dieter

Over the last two decades the Gram-positive bacterium Bacillus megaterium was systematically developed to a useful alternative protein production host. Multiple vector systems for high yield intra- and extracellular protein production were constructed. Strong inducible promoters were combined with DNA sequences for optimised ribosome binding sites, various leader peptides for protein export and N- as well as C-terminal affinity tags for affinity chromatographic purification of the desired protein. High cell density cultivation and recombinant protein production were successfully tested. For further system biology based control and optimisation of the production process the genomes of two B. megaterium strains were completely elucidated, DNA arrays designed, proteome, fluxome and metabolome analyses performed and all data integrated using the bioinformatics platform MEGABAC. Now, solid theoretical and experimental bases for primary modeling attempts of the production process are available.

Les effets des interfaces sur les proprietes magnetiques et de transport des multicouches nickel/iron et cobalt/silver

NASA Astrophysics Data System (ADS)

Veres, Teodor

Cette these est consacree a l'etude de l'evolution structurale des proprietes magnetiques et de transport des multicouches Ni/Fe et nanostructures a base de Co et de l'Ag. Dans une premiere partie, essentiellement bibliographique, nous introduisons quelques concepts de base relies aux proprietes magnetiques et de transport des multicouches metalliques. Ensuite, nous presentons une breve description des methodes d'analyse des resultats. La deuxieme partie est consacree a l'etude des proprietes magnetiques et de transport des multicouches ferromagnetiques/ferromagnetiques Ni/Fe. Nous montrerons qu'une interpretation coherente de ces proprietes necessite la prise en consideration des effets des interfaces. Nous nous attacherons a mettre en evidence, a evaluer et a etudier les effets de ces interfaces ainsi que leur evolution, et ce, suite a des traitements thermiques tel que le depot a temperature elevee et l'irradiation ionique. Les analyses correlees de la structure et de la magnetoresistance nous permettront d'emettre des conclusions sur l'influence des couches tampons entre l'interface et le substrat ainsi qu'entre les couches elles-memes sur le comportement magnetique des couches F/F. La troisieme partie est consacree aux systemes a Magneto-Resistance Geante (MRG) a base de Co et Ag. Nous allons etudier l'evolution de la microstructure suite a l'irradiation avec des ions Si+ ayant une energie de 1 MeV, ainsi que les effets de ces changements sur le comportement magnetique. Cette partie debutera par l'analyse des proprietes d'une multicouche hybride, intermediaire entre les multicouches et les materiaux granulaires. Nous analyserons a l'aide des mesures de diffraction, de relaxation superparamagnetique et de magnetoresistance, les evolutions structurales produites par l'irradiation ionique. Nous etablirons des modeles qui nous aideront a interpreter les resultats pour une serie des multicouches qui couvrent un large eventail de differents comportements magnetiques et ceci en fonction de l'epaisseur de la couche magnetique de Co. Nous verrons que dans ces systemes les effets de l'irradiation ionique sont fortement influences par l'energie de surface ainsi que par l'enthalpie de formation, largement positive pour le systeme Co/Ag.

The multiple roles of computational chemistry in fragment-based drug design

NASA Astrophysics Data System (ADS)

Law, Richard; Barker, Oliver; Barker, John J.; Hesterkamp, Thomas; Godemann, Robert; Andersen, Ole; Fryatt, Tara; Courtney, Steve; Hallett, Dave; Whittaker, Mark

2009-08-01

Fragment-based drug discovery (FBDD) represents a change in strategy from the screening of molecules with higher molecular weights and physical properties more akin to fully drug-like compounds, to the screening of smaller, less complex molecules. This is because it has been recognised that fragment hit molecules can be efficiently grown and optimised into leads, particularly after the binding mode to the target protein has been first determined by 3D structural elucidation, e.g. by NMR or X-ray crystallography. Several studies have shown that medicinal chemistry optimisation of an already drug-like hit or lead compound can result in a final compound with too high molecular weight and lipophilicity. The evolution of a lower molecular weight fragment hit therefore represents an attractive alternative approach to optimisation as it allows better control of compound properties. Computational chemistry can play an important role both prior to a fragment screen, in producing a target focussed fragment library, and post-screening in the evolution of a drug-like molecule from a fragment hit, both with and without the available fragment-target co-complex structure. We will review many of the current developments in the area and illustrate with some recent examples from successful FBDD discovery projects that we have conducted.

Efficacy of an Optimised Bacteriophage Cocktail to Clear Clostridium difficile in a Batch Fermentation Model

PubMed Central

Nale, Janet Y.; Redgwell, Tamsin A.; Millard, Andrew; Clokie, Martha R. J.

2018-01-01

Clostridium difficile infection (CDI) is a major cause of infectious diarrhea. Conventional antibiotics are not universally effective for all ribotypes, and can trigger dysbiosis, resistance and recurrent infection. Thus, novel therapeutics are needed to replace and/or supplement the current antibiotics. Here, we describe the activity of an optimised 4-phage cocktail to clear cultures of a clinical ribotype 014/020 strain in fermentation vessels spiked with combined fecal slurries from four healthy volunteers. After 5 h, we observed ~6-log reductions in C. difficile abundance in the prophylaxis regimen and complete C. difficile eradication after 24 h following prophylactic or remedial regimens. Viability assays revealed that commensal enterococci, bifidobacteria, lactobacilli, total anaerobes, and enterobacteria were not affected by either regimens, but a ~2-log increase in the enterobacteria, lactobacilli, and total anaerobe abundance was seen in the phage-only-treated vessel compared to other treatments. The impact of the phage treatments on components of the microbiota was further assayed using metagenomic analysis. Together, our data supports the therapeutic application of our optimised phage cocktail to treat CDI. Also, the increase in specific commensals observed in the phage-treated control could prevent further colonisation of C. difficile, and thus provide protection from infection being able to establish. PMID:29438355

A bi-population based scheme for an explicit exploration/exploitation trade-off in dynamic environments

NASA Astrophysics Data System (ADS)

Ben-Romdhane, Hajer; Krichen, Saoussen; Alba, Enrique

2017-05-01

Optimisation in changing environments is a challenging research topic since many real-world problems are inherently dynamic. Inspired by the natural evolution process, evolutionary algorithms (EAs) are among the most successful and promising approaches that have addressed dynamic optimisation problems. However, managing the exploration/exploitation trade-off in EAs is still a prevalent issue, and this is due to the difficulties associated with the control and measurement of such a behaviour. The proposal of this paper is to achieve a balance between exploration and exploitation in an explicit manner. The idea is to use two equally sized populations: the first one performs exploration while the second one is responsible for exploitation. These tasks are alternated from one generation to the next one in a regular pattern, so as to obtain a balanced search engine. Besides, we reinforce the ability of our algorithm to quickly adapt after cnhanges by means of a memory of past solutions. Such a combination aims to restrain the premature convergence, to broaden the search area, and to speed up the optimisation. We show through computational experiments, and based on a series of dynamic problems and many performance measures, that our approach improves the performance of EAs and outperforms competing algorithms.

Optimisation of culture composition for glyphosate degradation by Burkholderia vietnamiensis strain AQ5-12.

PubMed

Manogaran, Motharasan; Shukor, Mohd Yunus; Yasid, Nur Adeela; Khalil, Khalilah Abdul; Ahmad, Siti Aqlima

2018-02-01

The herbicide glyphosate is often used to control weeds in agricultural lands. However, despite its ability to effectively kill weeds at low cost, health problems are still reported due to its toxicity level. The removal of glyphosate from the environment is usually done by microbiological process since chemical process of degradation is ineffective due to the presence of highly stable bonds. Therefore, finding glyphosate-degrading microorganisms in the soil of interest is crucial to remediate this glyphosate. Burkholderia vietnamiensis strain AQ5-12 was found to have glyphosate-degrading ability. Optimisation of biodegradation condition was carried out utilising one factor at a time (OFAT) and response surface methodology (RSM). Five parameters including carbon and nitrogen source, pH, temperature and glyphosate concentration were optimised. Based on OFAT result, glyphosate degradation was observed to be optimum at fructose concentration of 6, 0.5 g/L ammonia sulphate, pH 6.5, temperature of 32 °C and glyphosate concentration at 100 ppm. Meanwhile, RSM resulted in a better degradation with 92.32% of 100 ppm glyphosate compared to OFAT. The bacterium was seen to tolerate up to 500 ppm glyphosate while increasing concentration results in reduced degradation and bacterial growth rate.

Optimizing Polymer Infusion Process for Thin Ply Textile Composites with Novel Matrix System

PubMed Central

Bhudolia, Somen K.; Perrotey, Pavel; Joshi, Sunil C.

2017-01-01

For mass production of structural composites, use of different textile patterns, custom preforming, room temperature cure high performance polymers and simplistic manufacturing approaches are desired. Woven fabrics are widely used for infusion processes owing to their high permeability but their localised mechanical performance is affected due to inherent associated crimps. The current investigation deals with manufacturing low-weight textile carbon non-crimp fabrics (NCFs) composites with a room temperature cure epoxy and a novel liquid Methyl methacrylate (MMA) thermoplastic matrix, Elium®. Vacuum assisted resin infusion (VARI) process is chosen as a cost effective manufacturing technique. Process parameters optimisation is required for thin NCFs due to intrinsic resistance it offers to the polymer flow. Cycles of repetitive manufacturing studies were carried out to optimise the NCF-thermoset (TS) and NCF with novel reactive thermoplastic (TP) resin. It was noticed that the controlled and optimised usage of flow mesh, vacuum level and flow speed during the resin infusion plays a significant part in deciding the final quality of the fabricated composites. The material selections, the challenges met during the manufacturing and the methods to overcome these are deliberated in this paper. An optimal three stage vacuum technique developed to manufacture the TP and TS composites with high fibre volume and lower void content is established and presented. PMID:28772654

Optimizing Polymer Infusion Process for Thin Ply Textile Composites with Novel Matrix System.

PubMed

Bhudolia, Somen K; Perrotey, Pavel; Joshi, Sunil C

2017-03-15

For mass production of structural composites, use of different textile patterns, custom preforming, room temperature cure high performance polymers and simplistic manufacturing approaches are desired. Woven fabrics are widely used for infusion processes owing to their high permeability but their localised mechanical performance is affected due to inherent associated crimps. The current investigation deals with manufacturing low-weight textile carbon non-crimp fabrics (NCFs) composites with a room temperature cure epoxy and a novel liquid Methyl methacrylate (MMA) thermoplastic matrix, Elium ® . Vacuum assisted resin infusion (VARI) process is chosen as a cost effective manufacturing technique. Process parameters optimisation is required for thin NCFs due to intrinsic resistance it offers to the polymer flow. Cycles of repetitive manufacturing studies were carried out to optimise the NCF-thermoset (TS) and NCF with novel reactive thermoplastic (TP) resin. It was noticed that the controlled and optimised usage of flow mesh, vacuum level and flow speed during the resin infusion plays a significant part in deciding the final quality of the fabricated composites. The material selections, the challenges met during the manufacturing and the methods to overcome these are deliberated in this paper. An optimal three stage vacuum technique developed to manufacture the TP and TS composites with high fibre volume and lower void content is established and presented.

Multi-Objectivising Combinatorial Optimisation Problems by Means of Elementary Landscape Decompositions.

PubMed

Ceberio, Josu; Calvo, Borja; Mendiburu, Alexander; Lozano, Jose A

2018-02-15

In the last decade, many works in combinatorial optimisation have shown that, due to the advances in multi-objective optimisation, the algorithms from this field could be used for solving single-objective problems as well. In this sense, a number of papers have proposed multi-objectivising single-objective problems in order to use multi-objective algorithms in their optimisation. In this article, we follow up this idea by presenting a methodology for multi-objectivising combinatorial optimisation problems based on elementary landscape decompositions of their objective function. Under this framework, each of the elementary landscapes obtained from the decomposition is considered as an independent objective function to optimise. In order to illustrate this general methodology, we consider four problems from different domains: the quadratic assignment problem and the linear ordering problem (permutation domain), the 0-1 unconstrained quadratic optimisation problem (binary domain), and the frequency assignment problem (integer domain). We implemented two widely known multi-objective algorithms, NSGA-II and SPEA2, and compared their performance with that of a single-objective GA. The experiments conducted on a large benchmark of instances of the four problems show that the multi-objective algorithms clearly outperform the single-objective approaches. Furthermore, a discussion on the results suggests that the multi-objective space generated by this decomposition enhances the exploration ability, thus permitting NSGA-II and SPEA2 to obtain better results in the majority of the tested instances.

Control fast or control smart: When should invading pathogens be controlled?

PubMed

Thompson, Robin N; Gilligan, Christopher A; Cunniffe, Nik J

2018-02-01

The intuitive response to an invading pathogen is to start disease management as rapidly as possible, since this would be expected to minimise the future impacts of disease. However, since more spread data become available as an outbreak unfolds, processes underpinning pathogen transmission can almost always be characterised more precisely later in epidemics. This allows the future progression of any outbreak to be forecast more accurately, and so enables control interventions to be targeted more precisely. There is also the chance that the outbreak might die out without any intervention whatsoever, making prophylactic control unnecessary. Optimal decision-making involves continuously balancing these potential benefits of waiting against the possible costs of further spread. We introduce a generic, extensible data-driven algorithm based on parameter estimation and outbreak simulation for making decisions in real-time concerning when and how to control an invading pathogen. The Control Smart Algorithm (CSA) resolves the trade-off between the competing advantages of controlling as soon as possible and controlling later when more information has become available. We show-using a generic mathematical model representing the transmission of a pathogen of agricultural animals or plants through a population of farms or fields-how the CSA allows the timing and level of deployment of vaccination or chemical control to be optimised. In particular, the algorithm outperforms simpler strategies such as intervening when the outbreak size reaches a pre-specified threshold, or controlling when the outbreak has persisted for a threshold length of time. This remains the case even if the simpler methods are fully optimised in advance. Our work highlights the potential benefits of giving careful consideration to the question of when to start disease management during emerging outbreaks, and provides a concrete framework to allow policy-makers to make this decision.

Fiabilité des structures mécaniques adaptatives: effet de la panne des actionneurs ou des capteurs sur la stabilité

NASA Astrophysics Data System (ADS)

Fall, H.; Charon, W.; Kouta, R.

2002-12-01

Ces dernières décennies, des activités significatives dans le monde étaient dirigées autour du contrôle actif. Le but de ces recherches était essentiellement d'améliorer les performances, la fiabilité et la sécurité des systèmes. Notamment dans le cas des structures soumises à des vibrations aléatoires. D'importants travaux ont été consacré à l'utilisation des “matériaux intelligents” comme capteurs et actionneurs. Cette article propose l'analyse de la fiabilité des systèmes mécaniques en étudiant les pannes des actionneurs ou des capteurs. L'effet de ces pannes sur la stabilité et la performance du système y est démontré. Les méthodologies de conception y sont rappelées. Des exemples numériques sont fournis à travers le contrôle d'un panneau sous chargement dynamique pour illustrer la méthode proposée.

Optimising ICT Effectiveness in Instruction and Learning: Multilevel Transformation Theory and a Pilot Project in Secondary Education

ERIC Educational Resources Information Center

Mooij, Ton

2004-01-01

Specific combinations of educational and ICT conditions including computer use may optimise learning processes, particularly for learners at risk. This position paper asks which curricular, instructional, and ICT characteristics can be expected to optimise learning processes and outcomes, and how to best achieve this optimization. A theoretical…

La manucure et la pédicure dans la ville de Ouagadougou (Burkina Faso): pratiques et risqué

PubMed Central

Korsaga-Somé, Nina; Andonaba, Jean Baptiste; Ouédraogo, Muriel Sidnoma; Tapsoba, Gilbert Patrice; Ilboudo, Léopold; Savadogo, Cérina; Barro-Traoré, Fatou; Niamba, Pascal; Traoré, Adama

2016-01-01

La manucure-pédicure est l'ensemble des soins esthétiques des mains, des pieds et des ongles. Au Burkina Faso, l'usage des produits de manucure-pédicure, les techniques utilisées ainsi que les risques encourus restent méconnus. L'objectif de notre étude était d’évaluer la pratique de la manucure-pédicure dans la ville de Ouagadougou. Nous avons mené une étude transversale descriptive de décembre 2010 à novembre 2012 incluant tout les praticiens ayant au moins six mois d'expérience dans l'activité et les clients présents sur les lieux au moment de l'enquête. Nous avons interrogé au total 313 praticiens et 313 clients. L’âge moyen des praticiens était de 19 ans et celui des clients de 32,2 ans. Les praticiens fixes étaient en majorité des femmes (96,87%), ceux mobiles surtout des hommes (68,37%), et 64,53% des clients étaient des femmes. Le pourcentage de praticiens n'ayant pas reçu de formation professionnelle était de 93,92%. 29,7% des praticiens faisaient tremper les instruments pendant au moins dix minutes dans de l'eau de javel; 75,71% savaient que l'utilisation de certains outils étaient dangereux et 26,51% étaient avaient présenté des effets secondaires. Parmi les clients, 40,25% savaient que le matériel utilisé comportait des risques et 30,35% avaient été victimes d'accidents. Les soins de manucure et de pédicure se font dans les salons de coiffure par des coiffeuses non formées à l'exercice de la profession La provenance et la composition des produits n'est pas connues. Des produits non recommandés sont utilisés (shampooing pour trempage des pieds, lame de rasoir et ciseaux pour raclage des pieds). Le recours à la manucure et/ou pédicure est parfois nécessaire mais cela ne doit pas faire perdre de vue les risques encourus. Une sensibilisation des clients et une formation des praticiens semblent nécessaires pour minimiser les risques. PMID:27642448

La prise en charge des troubles de santé mentale par les omnipraticiens du Québec

PubMed Central

Fleury, Marie-Josée; Farand, Lambert; Aubé, Denise; Imboua, Armelle

2012-01-01

Résumé Objectif Cette recherche vise à documenter la prise en charge des troubles mentaux (TM) par les omnipraticiens. Type d’étude Il s’agit d’une étude mixte intégrant un questionnaire auto-administré et des entrevues qualitatives. La banque de données administratives des actes médicaux de la Régie de l’assurance maladie du Québec a aussi été analysée. Contexte La province de Québec. Participants Un total de 1415 omnipraticiens de différents lieux de pratiques ont été sollicités pour le questionnaire; 970 ont été rejoints. Un sous-groupe de 60 omnipraticiens a été rejoint pour les entrevues. Principaux paramètres à l'étude La prévalence annuelle des consultations reliées à des TM courants (TMC) ou graves (TMG), les pratiques cliniques, les pratiques de collaboration, les facteurs facilitant ou entravant la prise en charge des TM, ainsi que les recommandations pour l’amélioration du système de soins. Résultats Le taux de réponse a été de 41% (n = 398 omnipraticiens) pour le questionnaire et de 63% (n = 60) pour les entrevues. Environ 25 % des visites chez les omnipraticiens sont associées à des TM. Presque tous les omnipraticiens prennent en charge des TMC et se sentent compétents pour le faire, à l’inverse de la situation retrouvée pour les TMG. Près de 20 % des TMC sont référés (principalement à des intervenants psychosociaux), alors que près de 75 % des TMG sont référés (surtout en psychiatrie et à l’urgence). Plus de 50 % des omnipraticiens affirment n’entretenir aucun contact avec l’une ou l’autre des ressources de santé mentale. Plusieurs facteurs influencent la prise en charge des TM: les profils des patients (complexité des TM, troubles concomitants); les caractéristiques des omnipraticiens (réseau informel, formation); la culture professionnelle (travail en silo, mécanismes cliniques formalisés); le milieu institutionnel (multidisciplinarité, salariat); l’organisation des services (ressources; coordination formalisée) et l’environnement (politiques). Conclusion Le rôle clé des omnipraticiens et leur soutien à la prise en charge des TM ont été démontrés, spécifiquement pour les TMC. Pour une prise en charge optimale des soins primaires de santé mentale, des stratégies à composantes multiples, dont les soins partagés, devraient être davantage déployées.

77 FR 58141 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-19

..., Iowa, Kate Garst Trustee; Sarah Garst, West Des Moines, Iowa), as a group acting in concert and... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C...

Automated model optimisation using the Cylc workflow engine (Cyclops v1.0)

NASA Astrophysics Data System (ADS)

Gorman, Richard M.; Oliver, Hilary J.

2018-06-01

Most geophysical models include many parameters that are not fully determined by theory, and can be tuned to improve the model's agreement with available data. We might attempt to automate this tuning process in an objective way by employing an optimisation algorithm to find the set of parameters that minimises a cost function derived from comparing model outputs with measurements. A number of algorithms are available for solving optimisation problems, in various programming languages, but interfacing such software to a complex geophysical model simulation presents certain challenges. To tackle this problem, we have developed an optimisation suite (Cyclops) based on the Cylc workflow engine that implements a wide selection of optimisation algorithms from the NLopt Python toolbox (Johnson, 2014). The Cyclops optimisation suite can be used to calibrate any modelling system that has itself been implemented as a (separate) Cylc model suite, provided it includes computation and output of the desired scalar cost function. A growing number of institutions are using Cylc to orchestrate complex distributed suites of interdependent cycling tasks within their operational forecast systems, and in such cases application of the optimisation suite is particularly straightforward. As a test case, we applied the Cyclops to calibrate a global implementation of the WAVEWATCH III (v4.18) third-generation spectral wave model, forced by ERA-Interim input fields. This was calibrated over a 1-year period (1997), before applying the calibrated model to a full (1979-2016) wave hindcast. The chosen error metric was the spatial average of the root mean square error of hindcast significant wave height compared with collocated altimeter records. We describe the results of a calibration in which up to 19 parameters were optimised.

Reliability of clinical impact grading by healthcare professionals of common prescribing error and optimisation cases in critical care patients.

PubMed

Bourne, Richard S; Shulman, Rob; Tomlin, Mark; Borthwick, Mark; Berry, Will; Mills, Gary H

2017-04-01

To identify between and within profession-rater reliability of clinical impact grading for common critical care prescribing error and optimisation cases. To identify representative clinical impact grades for each individual case. Electronic questionnaire. 5 UK NHS Trusts. 30 Critical care healthcare professionals (doctors, pharmacists and nurses). Participants graded severity of clinical impact (5-point categorical scale) of 50 error and 55 optimisation cases. Case between and within profession-rater reliability and modal clinical impact grading. Between and within profession rater reliability analysis used linear mixed model and intraclass correlation, respectively. The majority of error and optimisation cases (both 76%) had a modal clinical severity grade of moderate or higher. Error cases: doctors graded clinical impact significantly lower than pharmacists (-0.25; P < 0.001) and nurses (-0.53; P < 0.001), with nurses significantly higher than pharmacists (0.28; P < 0.001). Optimisation cases: doctors graded clinical impact significantly lower than nurses and pharmacists (-0.39 and -0.5; P < 0.001, respectively). Within profession reliability grading was excellent for pharmacists (0.88 and 0.89; P < 0.001) and doctors (0.79 and 0.83; P < 0.001) but only fair to good for nurses (0.43 and 0.74; P < 0.001), for optimisation and error cases, respectively. Representative clinical impact grades for over 100 common prescribing error and optimisation cases are reported for potential clinical practice and research application. The between professional variability highlights the importance of multidisciplinary perspectives in assessment of medication error and optimisation cases in clinical practice and research. © The Author 2017. Published by Oxford University Press in association with the International Society for Quality in Health Care. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com

Distributed optimisation problem with communication delay and external disturbance

NASA Astrophysics Data System (ADS)

Tran, Ngoc-Tu; Xiao, Jiang-Wen; Wang, Yan-Wu; Yang, Wu

2017-12-01

This paper investigates the distributed optimisation problem for the multi-agent systems (MASs) with the simultaneous presence of external disturbance and the communication delay. To solve this problem, a two-step design scheme is introduced. In the first step, based on the internal model principle, the internal model term is constructed to compensate the disturbance asymptotically. In the second step, a distributed optimisation algorithm is designed to solve the distributed optimisation problem based on the MASs with the simultaneous presence of disturbance and communication delay. Moreover, in the proposed algorithm, each agent interacts with its neighbours through the connected topology and the delay occurs during the information exchange. By utilising Lyapunov-Krasovskii functional, the delay-dependent conditions are derived for both slowly and fast time-varying delay, respectively, to ensure the convergence of the algorithm to the optimal solution of the optimisation problem. Several numerical simulation examples are provided to illustrate the effectiveness of the theoretical results.

An effective pseudospectral method for constraint dynamic optimisation problems with characteristic times

NASA Astrophysics Data System (ADS)

Xiao, Long; Liu, Xinggao; Ma, Liang; Zhang, Zeyin

2018-03-01

Dynamic optimisation problem with characteristic times, widely existing in many areas, is one of the frontiers and hotspots of dynamic optimisation researches. This paper considers a class of dynamic optimisation problems with constraints that depend on the interior points either fixed or variable, where a novel direct pseudospectral method using Legendre-Gauss (LG) collocation points for solving these problems is presented. The formula for the state at the terminal time of each subdomain is derived, which results in a linear combination of the state at the LG points in the subdomains so as to avoid the complex nonlinear integral. The sensitivities of the state at the collocation points with respect to the variable characteristic times are derived to improve the efficiency of the method. Three well-known characteristic time dynamic optimisation problems are solved and compared in detail among the reported literature methods. The research results show the effectiveness of the proposed method.

Medicines optimisation: priorities and challenges.

PubMed

Kaufman, Gerri

2016-03-23

Medicines optimisation is promoted in a guideline published in 2015 by the National Institute for Health and Care Excellence. Four guiding principles underpin medicines optimisation: aim to understand the patient's experience; ensure evidence-based choice of medicines; ensure medicines use is as safe as possible; and make medicines optimisation part of routine practice. Understanding the patient experience is important to improve adherence to medication regimens. This involves communication, shared decision making and respect for patient preferences. Evidence-based choice of medicines is important for clinical and cost effectiveness. Systems and processes for the reporting of medicines-related safety incidents have to be improved if medicines use is to be as safe as possible. Ensuring safe practice in medicines use when patients are transferred between organisations, and managing the complexities of polypharmacy are imperative. A medicines use review can help to ensure that medicines optimisation forms part of routine practice.

Central acylated ghrelin improves memory function and hippocampal AMPK activation and partly reverses the impairment of energy and glucose metabolism in rats infused with β-amyloid.

PubMed

Kang, Suna; Moon, Na Rang; Kim, Da Sol; Kim, Sung Hoon; Park, Sunmin

2015-09-01

Ghrelin is a gastric hormone released during the fasting state that targets the hypothalamus where it induces hunger; however, emerging evidence suggests it may also affect memory function. We examined the effect of central acylated-ghrelin and DES-acetylated ghrelin (native ghrelin) on memory function and glucose metabolism in an experimentally induced Alzheimer's disease (AD) rat model. AD rats were divided into 3 groups and Non-AD rats were used as a normal-control group. Each rat in the AD groups had intracerebroventricular (ICV) infusion of β-amyloid (25-35; 16.8nmol/day) into the lateral ventricle for 3 days, and then the pumps were changed to infuse either acylated-ghrelin (0.2nmol/h; AD-G), DES-acylated ghrelin (0.2nmol/h; AD-DES-G), or saline (control; AD-C) for 3 weeks. The Non-AD group had ICV infusion of β-amyloid (35-25) which does not deposit in the hippocampus. During the next 3 weeks memory function, food intake, body weight gain, body fat composition, and glucose metabolism were measured. AD-C exhibited greater β-amyloid deposition compared to Non-AD-C, and AD-G suppressed the increased β-amyloid deposition and potentiated the phosphorylation AMPK. In addition, AD-G increased the phosphorylation GSK and decreased the phosphorylation of Tau in comparison to AD-C and AD-DES-G. Cognitive function, measured by passive avoidance and water maze tests, was much lower in AD-C than Non-AD-C whereas AD-G but not AD-DES-G prevented the decrease (p<0.021). Body weight gain was lower in AD-C group than Non-AD-C group without changing epididymal fat mass. AD-G reversed the decrease in body weight which was due to increased energy intake and decreased energy expenditure. The AD-G group exhibited a decrease in the second part of serum glucose levels during an oral glucose tolerance test (OGTT) compared to the AD-C and AD-DES-G group (p<0.009). However, area under the curve of insulin during the first part of OGTT was higher in AD-DES-G than other groups, whereas during the second part it was suppressed in AD-G as much as Non-AD. In conclusion, central acylated ghrelin in rats prevented the deterioration of memory function, and energy and glucose metabolisms were partially improved, possibly due to less β-amyloid accumulation. This research suggests that interventions such as intermittent fasting to facilitate sustained elevations of acyl-ghrelin should be investigated for cognitive and metabolic benefits, especially in person with early symptoms of memory impairment. Copyright © 2015 Elsevier Inc. All rights reserved.

Effets de la formation sur la violence conjugale

PubMed Central

Zaher, Eman; Keogh, Kelly; Ratnapalan, Savithiri

2014-01-01

Résumé Objectif Décrire et évaluer l’efficacité de la formation concernant la violence conjugale pour améliorer les connaissances et permettre la reconnaissance et la prise en charge par les médecins des femmes victimes de violence. Sources des données On a fait une recension dans la base de données des révisions systématiques de Cochrane, MEDLINE, PubMed, PsycINFO, ERIC et EMBASE pour trouver des articles publiés entre le 1e janvier 2000 et le 1e novembre 2012. Des recherches manuelles ont complété cette recension pour cerner des articles pertinents à l’aide d’une stratégie de recherche combinant des textes, mots et expressions MeSH. Sélection des études On a choisi des études randomisées contrôlées qui portaient sur des interventions éducatives à l’intention des médecins et fournissaient des données sur les effets des interventions. Synthèse On a inclus 9 études randomisées contrôlées qui décrivaient différentes approches pédagogiques et diverses mesures des résultats. Trois études examinaient les effets d’interventions éducatives pour des médecins en formation postdoctorale et ont constaté une augmentation des connaissances, mais il n’y a eu aucun changement dans le comportement en ce qui a trait à l’identification des victimes de violence conjugale. Six études portaient sur des interventions éducatives pour des médecins en pratique active. Trois d’entre elles utilisaient une approche à multiples facettes pour les médecins, qui combinait une formation ainsi que des interventions de soutien de la part du système pour changer les comportements des médecins, comme une sensibilisation générale accrue à la violence conjugale au moyen de brochures et d’affiches, des aide-mémoire pour rappeler aux médecins comment identifier les victimes, des moyens pour faciliter l’accès des médecins à des services de soutien pour les victimes, la réalisation d’audits et la fourniture de rétroaction. Les interventions éducatives à multiples facettes prenaient la forme d’ateliers interactifs, d’apprentissage sur le web et de formation expérientielle. Une autre étude utilisait des discussions de groupes témoins et de la formation et a permis de constater une amélioration dans le signalement de la violence conjugale par les médecins. Les 2 autres études ont relevé une meilleure perception par les médecins en pratique de leur confiance en eux à l’aide d’apprentissage par problèmes en ligne. Conclusion Il a été difficile de déterminer quelle stratégie pédagogique était la plus efficace étant donné que les interventions éducatives et les mesures des résultats variaient entre les études choisies. De brèves interventions pour les médecins en formation postdoctorale amélioraient les connaissances mais ne semblaient pas influencer les comportements. La formation en ligne sous forme d’apprentissage par problèmes améliorait les perceptions des médecins en pratique, leurs connaissances et leurs habiletés quant à la prise en charge de la violence conjugale. La formation des médecins combinée à des interventions de soutien de la part du système semblait bénéfique aux victimes de violence conjugale et augmentait le nombre de demandes de consultations auprès des ressources de soutien à leur intention.

La prévention de l’étouffement et de la suffocation chez les enfants

PubMed Central

Cyr, Claude

2012-01-01

RÉSUMÉ L’étouffement, la suffocation et la strangulation sont responsables de graves blessures non intentionnelles chez les enfants et constituent des causes importantes de décès non intentionnels chez les nourrissons et les tout-petits. Presque la totalité des décès et des blessures attribuables à un étouffement, une suffocation ou une strangulation sont évitables. Le présent document de principes traite des définitions, de l’épidémiologie et des stratégies de prévention efficaces de ces blessures. Des recommandations qui combinent des démarches pour améliorer la sécurité, incluant des recherches, de la surveillance, des lois et des normes, la conception des produits et l’éducation, sont présentées. Les dispensateurs de soins pédiatriques devraient encourager les parents et autres personnes qui s’occupent d’enfants à apprendre la réanimation cardiorespiratoire (RCR) et les premiers soins en cas d’étouffement, et leur offrir des conseils préventifs adaptés à l’âge de leur enfant lors des bilans de santé réguliers afin de prévenir ces blessures.

Ion implanted dielectric elastomer circuits

NASA Astrophysics Data System (ADS)

O'Brien, Benjamin M.; Rosset, Samuel; Anderson, Iain A.; Shea, Herbert R.

2013-06-01

Starfish and octopuses control their infinite degree-of-freedom arms with panache—capabilities typical of nature where the distribution of reflex-like intelligence throughout soft muscular networks greatly outperforms anything hard, heavy, and man-made. Dielectric elastomer actuators show great promise for soft artificial muscle networks. One way to make them smart is with piezo-resistive Dielectric Elastomer Switches (DES) that can be combined with artificial muscles to create arbitrary digital logic circuits. Unfortunately there are currently no reliable materials or fabrication process. Thus devices typically fail within a few thousand cycles. As a first step in the search for better materials we present a preliminary exploration of piezo-resistors made with filtered cathodic vacuum arc metal ion implantation. DES were formed on polydimethylsiloxane silicone membranes out of ion implanted gold nano-clusters. We propose that there are four distinct regimes (high dose, above percolation, on percolation, low dose) in which gold ion implanted piezo-resistors can operate and present experimental results on implanted piezo-resistors switching high voltages as well as a simple artificial muscle inverter. While gold ion implanted DES are limited by high hysteresis and low sensitivity, they already show promise for a range of applications including hysteretic oscillators and soft generators. With improvements to implanter process control the promise of artificial muscle circuitry for soft smart actuator networks could become a reality.

Peste Des Petits Ruminants Virus Infection of Small Ruminants: A Comprehensive Review

PubMed Central

Kumar, Naveen; Maherchandani, Sunil; Kashyap, Sudhir Kumar; Singh, Shoor Vir; Sharma, Shalini; Chaubey, Kundan Kumar; Ly, Hinh

2014-01-01

Peste des petits ruminants (PPR) is caused by a Morbillivirus that belongs to the family Paramyxoviridae. PPR is an acute, highly contagious and fatal disease primarily affecting goats and sheep, whereas cattle undergo sub-clinical infection. With morbidity and mortality rates that can be as high as 90%, PPR is classified as an OIE (Office International des Epizooties)-listed disease. Considering the importance of sheep and goats in the livelihood of the poor and marginal farmers in Africa and South Asia, PPR is an important concern for food security and poverty alleviation. PPR virus (PPRV) and rinderpest virus (RPV) are closely related Morbilliviruses. Rinderpest has been globally eradicated by mass vaccination. Though a live attenuated vaccine is available against PPR for immunoprophylaxis, due to its instability in subtropical climate (thermo-sensitivity), unavailability of required doses and insufficient coverage (herd immunity), the disease control program has not been a great success. Further, emerging evidence of poor cross neutralization between vaccine strain and PPRV strains currently circulating in the field has raised concerns about the protective efficacy of the existing PPR vaccines. This review summarizes the recent advancement in PPRV replication, its pathogenesis, immune response to vaccine and disease control. Attempts have also been made to highlight the current trends in understanding the host susceptibility and resistance to PPR. PMID:24915458

Caractérisation de l'état de surface et des contraintes résiduelles engendrées par meulage

NASA Astrophysics Data System (ADS)

Gognau, D.; Blehaut, H.; Dürr, J.; Hariri, S.; Khouchaf, L.; Flahaut, P.

2002-07-01

grinding operations are generally used to prepare surfaces or improve surface state before or after welding. These operations, when carried out manually with portable machines, induce superficial work hardening, modification of the structure of material and residual stresses. An experimental study about the influence of grinding has been carried out on two metallic materials, a low carbon steel (A42-CP) and an austenitic stainless steel (316L), in order to characterise the grinding effects. Manual grinding being difficult to control (no repeatable effects), a test rig using a portable machine has been made. This test rig enables to control the grinding parameters in order to obtain repeatable grinding operations. Characterisation of the ground surfaces was made by 2D profilometry and measurements of residual stresses have been carried out with a Set-X Elphyse apparatus. The profiles of residual stresses obtained show, on the one hand, that on each material, identical grindings generate identical states of stresses and on the other hand, that materials have not the same behaviour, From a metallurgical point of view, we also observe that the grinding effects are different for both materials. The grinding of the A42 steel highlights a crushing of the grain near the surface while the 316L stainless steel grinding reveals sliding bands. Des opérations de meulage sont régulièrement effectuées sur des matériaux métalliques pour préparer les surfaces ou pour améliorer l'état de ces surfaces après soudage. Ces opérations réalisées manuellement engendrent un écrouissage superficiel, une modification de la structure du matériau et par conséquent des contraintes résiduelles. Une étude expérimentale a été menée sur un acier à bas carbone (A42-CP) et un acier inoxydable austénitique (316L) afin de caractériser les effets du meulage. Le meulage manuel étant difficile à maîtriser (effets non reproductibles), un banc d'essai utilisant une machine portative a été réalisé afin de contrôler les différents paramètres caractéristiques des opérations de meulage. Ensuite, la détermination de la rugosité des surfaces meulées s'est faite par profilornétrie 2D et les contraintes résiduelles ont été mesurées sur un appareil Set-X Elphyse. Les profils de contraintes obtenus montrent d'une part que sur un même matériau, des meulages réalisés dans les mêmes conditions aboutissent à des résultats semblables et d'autre part, que les deux matériaux utilises se comportent différemment. Ainsi, d'un point de vue métallurgique, on observe que le meulage de l'acier A42 favorise un écrasement des grains proches de la surface alors que le meulage de l'acier inoxydable 316L fait apparaître de nombreuses bandes de glissement.

Effet Bauschinger lors de la plasticité cyclique de l'aluminium pur monocristallin

NASA Astrophysics Data System (ADS)

Alhamany, A.; Chicois, J.; Fougères, R.; Hamel, A.

1992-08-01

This paper is concerned with the study of microscopic mechanisms which control the cyclic deformation of pure aluminium and especially with the analysis of the Bauschinger effect which appears in aluminium single crystals deformed by cyclic straining. Fatigue tests are performed on Al single crystals with the crystal axis parallel to [ overline{1}23] at room temperature, at plastic shear strain amplitudes in the range from 10^{-4} to 3× 10^{-3}. Mechanical saturation is not obtained at any strain level. Instead, a hardening-softening-secondary hardening sequence is found. The magnitude of the Bauschinger effect as the difference between yield stresses in traction and in compression, changes all along the fatigue loop and during the fatigue test. The Bauschinger effect disappears at two points of the fatigue loop, one in the traction part, the other in the compression one. At these points, the Bauschinger effect is inverted. Dislocation arrangement evolutions with fatigue conditions can explain the cyclic behaviour of Al single crystals. An heterogeneous dislocation distribution can be observed in the cyclically strained metal : dislocation tangles, long dislocation walls and dislocation cell walls, separated by dislocation poor channels appear in the material as a function of the cycle number. The long range internal stress necessary to ensure the compatibility of deformation between the hard and soft regions controls the observed Bauschinger effect. Ce travail s'inscrit dans le cadre de l'étude des mécanismes microsocopiques intervenant lors de la déformation cyclique de l'aluminium pur et concerne en particulier l'analyse de l'effet Bauschinger apparaissant au cours de la solliciation cyclique des monocristaux. L'étude a été menée à température ambiante sur des monocristaux d'aluminium pur orientés pour un glissement simple (axe [ overline{1}23] ), à des amplitudes de déformation plastique comprise entre 10^{-4} et quelques 10^{-3}. Nous n'avons pas obtenu de véritable saturation mécanique. Nous sommes en présence d'une séquence durcissement-adoucissement-durcissement secondaire. L'amplitude de l'effet Bauschinger considéré comme la différence entre les limites élastiques en traction et en compression mesurées selon une procédure appropriée, évolue le long d'une boucle de fatigue, s'annule pour deux points particuliers l'un en traction l'autre en compression. De part et d'autre de ces points, le signe de l'effet Bauschinger est inversé. Les microstructures des états fatigués sont caractérisés par une répartition hétérogène des dislocations constituée d'amas, de murs ou des parois, suivant le degré de déformation cyclique, séparés par des zones à faible densité de dislocations. Les contraintes internes liées aux incompatibilités de déformation résultant de cette répartition hétérogène des dislocations sont à l'origine de l'effet Bauschinger observé dans les monocristaux. Ces contraintes et l'évolution de la quantité de cellules de dislocations avec la fatigue expliquent le durcissement secondaire.

Measuring Effects and Success in Influence Operations: Challenges, Limitations and Opportunitites

DTIC Science & Technology

2011-04-01

domaines de la psychologie , de l’anthropologie et de la sociologie, ainsi que sur des entrevues menées auprès de pionniers des technologies de...documents issus des domaines de la psychologie , de l’anthropologie et de la sociologie, ainsi que sur des entrevues menées auprès de pionniers des...la psychologie , de l’anthropologie et de la sociologie, ainsi que sur des entrevues menées auprès de pionniers des technologies de l’intelligence

Incidence and Predictors of reCurrent Restenosis After Drug-coated Balloon Angioplasty for Restenosis of a drUg-eluting Stent: The ICARUS Cooperation.

PubMed

Cassese, Salvatore; Xu, Bo; Habara, Seiji; Rittger, Harald; Byrne, Robert A; Waliszewski, Matthias; Pérez-Vizcayno, María José; Gao, Runlin; Kastrati, Adnan; Alfonso, Fernando

2017-09-12

The incidence and predictors of recurrent restenosis after drug-coated balloon (DCB) angioplasty for drug-eluting stent (DES) restenosis remain poorly studied. We sought to evaluate the incidence and predictors of recurrent restenosis among participants in randomized controlled trials receiving DCB angioplasty for DES restenosis. The clinical and lesion data of individuals enrolled in 6 randomized controlled trials of DCB angioplasty for DES restenosis were pooled. All patients included in this report were assigned to receive paclitaxel-coated balloon angioplasty with the SeQuent Please DCB (B Braun, Melsungen, Germany). The current analysis focused on participants with available follow-up angiography at 6 to 9 months. The incidence of recurrent restenosis, defined as diameter restenosis ≥ 50% in the in-segment area at follow-up angiography, and its clinical and angiographic predictors were evaluated. A total of 546 patients were combined in a single dataset. Angiographic follow-up at 6 to 9 months was available for 484 patients (88.6%) with 518 treated lesions. Recurrent restenosis was detected in 101 (20.8%) patients. On multivariable analysis, lesion length (OR, 1.58; 95%CI, 1.10-2.26; P=.012 for 5mm increase) and vessel size (OR, 1.42; 95%, 1.12-1.79; P=.003 for 0.5mm reduction) were independently associated with recurrent restenosis. In the largest cohort to date of individuals with angiographic surveillance after DCB angioplasty for DES restenosis, we demonstrated that recurrent restenosis occurs in approximately 1 out of 5 patients. Predictors of recurrent restenosis are increased lesion length and small vessel size. Copyright © 2017 Sociedad Española de Cardiología. Published by Elsevier España, S.L.U. All rights reserved.

Rationale and design of the Patient Related OuTcomes with Endeavor versus Cypher stenting Trial (PROTECT): randomized controlled trial comparing the incidence of stent thrombosis and clinical events after sirolimus or zotarolimus drug-eluting stent implantation.

PubMed

Camenzind, Edoardo; Wijns, William; Mauri, Laura; Boersma, Eric; Parikh, Keyur; Kurowski, Volkhard; Gao, Runlin; Bode, Christoph; Greenwood, John P; Gershlick, Anthony; O'Neill, William; Serruys, Patrick W; Jorissen, Brenda; Steg, P Gabriel

2009-12-01

Drug-eluting stents (DES) reduce restenosis rates compared to bare-metal stents. Most trials using DES enrolled selected patient and lesion subtypes, and primary endpoint focused on angiographic metrics or relatively short-term outcomes. When DES are used in broader types of lesions and patients, important differences may emerge in long-term outcomes between stent types, particularly the incidence of late stent thrombosis. PROTECT is a randomized, open-label trial comparing the long-term safety of the zotarolimus-eluting stent and the sirolimus-eluting stent. The trial has enrolled 8,800 patients representative of those seen in routine clinical practice, undergoing elective, unplanned, or emergency procedures in native coronary arteries in 196 centers in 36 countries. Indications for the procedure and selection of target vessel and lesion characteristics were at the operator's discretion. Procedures could be staged, but no more than 4 target lesions could be treated per patient. Duration of dual antiplatelet therapy was prespecified to achieve similar lengths of treatment in both study arms. The shortest predefined duration was 3 months, as per the manufacturer's instructions. The primary outcome measure is the composite rate of definite and probable stent thrombosis at 3 years, centrally adjudicated using Academic Research Consortium definitions. The main secondary end points are 3-year all-cause mortality, cardiac death, large nonfatal myocardial infarction, and all myocardial infarctions. This large, international, randomized, controlled trial will provide important information on comparative rates of stent thrombosis between 2 different DES systems and safety as assessed by patient-relevant long-term clinical outcomes.

Instrumental color control for metallic coatings

NASA Astrophysics Data System (ADS)

Chou, W.; Han, Bing; Cui, Guihua; Rigg, Bryan; Luo, Ming R.

2002-06-01

This paper describes work investigating a suitable color quality control method for metallic coatings. A set of psychological experiments was carried out based upon 50 pairs of samples. The results were used to test the performance of various color difference formulae. Different techniques were developed by optimising the weights and/or the lightness parametric factors of colour differences calculated from the four measuring angles. The results show that the new techniques give a significant improvement compared to conventional techniques.

Choosing the appropriate forecasting model for predictive parameter control.

PubMed

Aleti, Aldeida; Moser, Irene; Meedeniya, Indika; Grunske, Lars

2014-01-01

All commonly used stochastic optimisation algorithms have to be parameterised to perform effectively. Adaptive parameter control (APC) is an effective method used for this purpose. APC repeatedly adjusts parameter values during the optimisation process for optimal algorithm performance. The assignment of parameter values for a given iteration is based on previously measured performance. In recent research, time series prediction has been proposed as a method of projecting the probabilities to use for parameter value selection. In this work, we examine the suitability of a variety of prediction methods for the projection of future parameter performance based on previous data. All considered prediction methods have assumptions the time series data has to conform to for the prediction method to provide accurate projections. Looking specifically at parameters of evolutionary algorithms (EAs), we find that all standard EA parameters with the exception of population size conform largely to the assumptions made by the considered prediction methods. Evaluating the performance of these prediction methods, we find that linear regression provides the best results by a very small and statistically insignificant margin. Regardless of the prediction method, predictive parameter control outperforms state of the art parameter control methods when the performance data adheres to the assumptions made by the prediction method. When a parameter's performance data does not adhere to the assumptions made by the forecasting method, the use of prediction does not have a notable adverse impact on the algorithm's performance.

Study rationale and design of OPTIMISE, a randomised controlled trial on the effect of benchmarking on quality of care in type 2 diabetes mellitus.

PubMed

Nobels, Frank; Debacker, Noëmi; Brotons, Carlos; Elisaf, Moses; Hermans, Michel P; Michel, Georges; Muls, Erik

2011-09-22

To investigate the effect of physician- and patient-specific feedback with benchmarking on the quality of care in adults with type 2 diabetes mellitus (T2DM). Study centres in six European countries were randomised to either a benchmarking or control group. Physicians in both groups received feedback on modifiable outcome indicators (glycated haemoglobin [HbA1c], glycaemia, total cholesterol, high density lipoprotein-cholesterol, low density lipoprotein [LDL]-cholesterol and triglycerides) for each patient at 0, 4, 8 and 12 months, based on the four times yearly control visits recommended by international guidelines. The benchmarking group also received comparative results on three critical quality indicators of vascular risk (HbA1c, LDL-cholesterol and systolic blood pressure [SBP]), checked against the results of their colleagues from the same country, and versus pre-set targets. After 12 months of follow up, the percentage of patients achieving the pre-determined targets for the three critical quality indicators will be assessed in the two groups. Recruitment was completed in December 2008 with 3994 evaluable patients. This paper discusses the study rationale and design of OPTIMISE, a randomised controlled study, that will help assess whether benchmarking is a useful clinical tool for improving outcomes in T2DM in primary care. NCT00681850.

Study rationale and design of OPTIMISE, a randomised controlled trial on the effect of benchmarking on quality of care in type 2 diabetes mellitus

PubMed Central

2011-01-01

Background To investigate the effect of physician- and patient-specific feedback with benchmarking on the quality of care in adults with type 2 diabetes mellitus (T2DM). Methods Study centres in six European countries were randomised to either a benchmarking or control group. Physicians in both groups received feedback on modifiable outcome indicators (glycated haemoglobin [HbA1c], glycaemia, total cholesterol, high density lipoprotein-cholesterol, low density lipoprotein [LDL]-cholesterol and triglycerides) for each patient at 0, 4, 8 and 12 months, based on the four times yearly control visits recommended by international guidelines. The benchmarking group also received comparative results on three critical quality indicators of vascular risk (HbA1c, LDL-cholesterol and systolic blood pressure [SBP]), checked against the results of their colleagues from the same country, and versus pre-set targets. After 12 months of follow up, the percentage of patients achieving the pre-determined targets for the three critical quality indicators will be assessed in the two groups. Results Recruitment was completed in December 2008 with 3994 evaluable patients. Conclusions This paper discusses the study rationale and design of OPTIMISE, a randomised controlled study, that will help assess whether benchmarking is a useful clinical tool for improving outcomes in T2DM in primary care. Trial registration NCT00681850 PMID:21939502

Implementation Cryptography Data Encryption Standard (DES) and Triple Data Encryption Standard (3DES) Method in Communication System Based Near Field Communication (NFC)

NASA Astrophysics Data System (ADS)

Ratnadewi; Pramono Adhie, Roy; Hutama, Yonatan; Saleh Ahmar, A.; Setiawan, M. I.

2018-01-01

Cryptography is a method used to create secure communication by manipulating sent messages during the communication occurred so only intended party that can know the content of that messages. Some of the most commonly used cryptography methods to protect sent messages, especially in the form of text, are DES and 3DES cryptography method. This research will explain the DES and 3DES cryptography method and its use for stored data security in smart cards that working in the NFC-based communication system. Several things that will be explained in this research is the ways of working of DES and 3DES cryptography method in doing the protection process of a data and software engineering through the creation of application using C++ programming language to realize and test the performance of DES and 3DES cryptography method in encrypted data writing process to smart cards and decrypted data reading process from smart cards. The execution time of the entering and the reading process data using a smart card DES cryptography method is faster than using 3DES cryptography.

Reduction of low frequency vibration of truck driver and seating system through system parameter identification, sensitivity analysis and active control

NASA Astrophysics Data System (ADS)

Wang, Xu; Bi, Fengrong; Du, Haiping

2018-05-01

This paper aims to develop an 5-degree-of-freedom driver and seating system model for optimal vibration control. A new method for identification of the driver seating system parameters from experimental vibration measurement has been developed. The parameter sensitivity analysis has been conducted considering the random excitation frequency and system parameter uncertainty. The most and least sensitive system parameters for the transmissibility ratio have been identified. The optimised PID controllers have been developed to reduce the driver's body vibration.

Multi-Optimisation Consensus Clustering

NASA Astrophysics Data System (ADS)

Li, Jian; Swift, Stephen; Liu, Xiaohui

Ensemble Clustering has been developed to provide an alternative way of obtaining more stable and accurate clustering results. It aims to avoid the biases of individual clustering algorithms. However, it is still a challenge to develop an efficient and robust method for Ensemble Clustering. Based on an existing ensemble clustering method, Consensus Clustering (CC), this paper introduces an advanced Consensus Clustering algorithm called Multi-Optimisation Consensus Clustering (MOCC), which utilises an optimised Agreement Separation criterion and a Multi-Optimisation framework to improve the performance of CC. Fifteen different data sets are used for evaluating the performance of MOCC. The results reveal that MOCC can generate more accurate clustering results than the original CC algorithm.

Are Everolimus-Eluting Stents Associated With Better Clinical Outcomes Compared to Other Drug-Eluting Stents in Patients With Type 2 Diabetes Mellitus?

PubMed Central

Bundhun, Pravesh Kumar; Pursun, Manish; Teeluck, Abhishek Rishikesh; Long, Man-Yun

2016-01-01

Abstract Controversies still exist with the use of Everolimus-Eluting Stents (EES) compared to other Drug-Eluting Stents (DES) in patients with Type 2 Diabetes Mellitus (T2DM). Therefore, in order to solve this issue, we aim to compare the 1-year adverse clinical outcomes between EES and non-EE DES with a larger number of patients with T2DM. Medline, EMBASE, PubMed databases, as well as the Cochrane library were searched for randomized controlled trials (RCTs) and observational studies (OS) comparing EES and non-EE DES in patients with T2DM. One-year adverse outcomes were considered as the clinical endpoints in this study. Odd ratios (OR) with 95% confidence interval (CI) were used to express the pooled effect on discontinuous variables and the pooled analyses were performed with RevMan 5.3. Ten studies consisting of a total of 11,981 patients with T2DM (6800 patients in the EES group and 5181 in the non-EE DES group) were included in this meta-analysis. EES were associated with a significantly lower major adverse cardiac events (MACEs) with OR: 0.83, 95% CI: 0.70–0.98, P = 0.03. Revascularization including target vessel revascularization (TVR) and target lesion revascularization (TLR) were also significantly lower in the EES group with OR: 0.62, 95% CI: 0.40–0.94, P = 0.03 and OR: 0.74, 95% CI: 0.57–0.95, P = 0.02, respectively. Also, a significantly lower rate of stent thrombosis with OR: 0.63, 95% CI: 0.46–0.86, P = 0.003 was observed in the EES group. However, a similar mortality rate was reported between the EES and non-EE DES groups. During this 1-year follow-up period, EES were associated with significantly better clinical outcomes compared to non-EE DES in patients suffering from T2DM. However, further research comparing EES with non-EE DES in insulin-treated and noninsulin-treated patients with T2DM are recommended. PMID:27057888

[Not Available].

PubMed

Siah, S; Belefqih, R; Elouennass, M; Fouadi, F E; Ihrai, I

2009-06-30

L'infection nosocomiale bactérienne étant l'une des principales causes de morbidité et de mortalité chez le brûlé, nous avons réalisé une étude rétrospective portant sur 84 patients hospitalisés au sein du service de réanimation des brûlés de l'Hôpital Militaire d'Instruction Mohammed V de Rabat, sur une période de 3 ans, du premier janvier 2001 au 31 décembre 2003. Les critères d'infection nosocomiale étaient ceux du Center for Disease Control d'Atlanta de 1988. Les taux d'incidence ont été calculés. La population infectée a été comparée à celle non infectée. L'écologie bactérienne du service a été décrite comme aussi l'antibiotype. Il ressort de cette étude la survenue de 87 infections nosocomiales chez 27 patients. L'incidence cumulative était de 103 infections pour 1000 jours de traitement. Pour ce qui est des caractéristiques des infections bactériennes, les sites infectés étaient la peau (77%), le sang (13,8%), les voies urinaires (8%) et les poumons (1,1%). Les principaux germes étaient: Staphylococcus sp. (33,3%), Pseudomonas aeruginosa (23%), Enterococcus faecalis et Acinetobacter (8%). Les staphylocoques étaient méticillo-résistants dans 22,2% des cas. Le Pseudomonas et l'Acinetobacter étaient multirésistants (60%). Dans notre étude les facteurs prédictifs de survenue des infections nosocomiales que nous avons retenus après l'étude comparative des populations infectées et non infectées ont été l'âge, le body mass index, l'abbreviated burn severity index et le remplissage initial. En isolant ces paramètres, nous avons pu établir une équation à valeur prédictive de survenue d'infection nosocomiale chez le patient brûlé.

Developpement de mesures non destructives, par ondes ultrasonores, d'epaisseurs de fronts de solidification dans les reacteurs metallurgiques

NASA Astrophysics Data System (ADS)

Floquet, Jimmy

Dans les cuves d'electrolyse d'aluminium, le milieu de reaction tres corrosif attaque les parois de la cuve, ce qui diminue leur duree de vie et augmente les couts de production. Le talus, qui se forme sous l'effet des pertes de chaleur qui maintiennent un equilibre thermique dans la cuve, sert de protection naturelle a la cuve. Son epaisseur doit etre controlee pour maximiser cet effet. Advenant la resorption non voulue de ce talus, les degats generes peuvent s'evaluer a plusieurs centaines de milliers de dollars par cuve. Aussi, l'objectif est de developper une mesure ultrasonore de l'epaisseur du talus, car elle serait non intrusive et non destructive. La precision attendue est de l'ordre du centimetre pour des mesures d'epaisseurs comprenant 2 materiaux, allant de 5 a 20 cm. Cette precision est le facteur cle permettant aux industriels de controler l'epaisseur du talus de maniere efficace (maximiser la protection des parois tout en maximisant l'efficacite energetique du procede), par l'ajout d'un flux thermique. Cependant, l'efficacite d'une mesure ultrasonore dans cet environnement hostile reste a demontrer. Les travaux preliminaires ont permis de selectionner un transducteur ultrasonore a contact ayant la capacite a resister aux conditions de mesure (hautes temperatures, materiaux non caracterises...). Differentes mesures a froid (traite par analyse temps-frequence) ont permis d'evaluer la vitesse de propagation des ondes dans le materiau de la cuve en graphite et de la cryolite, demontrant la possibilite d'extraire l'information pertinente d'epaisseur du talus in fine. Fort de cette phase de caracterisation des materiaux sur la reponse acoustique des materiaux, les travaux a venir ont ete realises sur un modele reduit de la cuve. Le montage experimental, un four evoluant a 1050 °C, instrumente d'une multitude de capteurs thermique, permettra une comparaison de la mesure intrusive LVDT a celle du transducteur, dans des conditions proches de la mesure industrielle. Mots-cles : Ultrasons, CND, Haute temperature, Aluminium, Cuve d'electrolyse.

Electrodeposition of Zn and Cu-Zn alloy from ZnO/CuO precursors in deep eutectic solvent

NASA Astrophysics Data System (ADS)

Xie, Xueliang; Zou, Xingli; Lu, Xionggang; Lu, Changyuan; Cheng, Hongwei; Xu, Qian; Zhou, Zhongfu

2016-11-01

The electrodeposition of Zn and Cu-Zn alloy has been investigated in choline chloride (ChCl)/urea (1:2 molar ratio) based deep eutectic solvent (DES). Cyclic voltammetry study demonstrates that the reduction of Zn(II) to Zn is a diffusion-controlled quasi-reversible, one-step, two electrons transfer process. Chronoamperometric investigation indicates that the electrodeposition of Zn on a Cu electrode typically involves three-dimensional instantaneous nucleation with diffusion-controlled growth process. Micro/nanostructured Zn films can be obtained by controlling the electrodeposition potential and temperature. The electrodeposited Zn crystals preferentially orient parallel to the (101) plane. The Zn films electrodeposited under more positive potentials and low temperatures exhibit improved corrosion resistance in 3 wt% NaCl solution. In addition, Cu-Zn alloy films have also been electrodeposited directly from CuO-ZnO precursors in ChCl/urea-based DES. The XRD analysis indicates that the phase composition of the electrodeposited Cu-Zn alloy depends on the electrodeposition potential.

Cell population heterogeneity and evolution towards drug resistance in cancer: Biological and mathematical assessment, theoretical treatment optimisation.

PubMed

Chisholm, Rebecca H; Lorenzi, Tommaso; Clairambault, Jean

2016-11-01

Drug-induced drug resistance in cancer has been attributed to diverse biological mechanisms at the individual cell or cell population scale, relying on stochastically or epigenetically varying expression of phenotypes at the single cell level, and on the adaptability of tumours at the cell population level. We focus on intra-tumour heterogeneity, namely between-cell variability within cancer cell populations, to account for drug resistance. To shed light on such heterogeneity, we review evolutionary mechanisms that encompass the great evolution that has designed multicellular organisms, as well as smaller windows of evolution on the time scale of human disease. We also present mathematical models used to predict drug resistance in cancer and optimal control methods that can circumvent it in combined therapeutic strategies. Plasticity in cancer cells, i.e., partial reversal to a stem-like status in individual cells and resulting adaptability of cancer cell populations, may be viewed as backward evolution making cancer cell populations resistant to drug insult. This reversible plasticity is captured by mathematical models that incorporate between-cell heterogeneity through continuous phenotypic variables. Such models have the benefit of being compatible with optimal control methods for the design of optimised therapeutic protocols involving combinations of cytotoxic and cytostatic treatments with epigenetic drugs and immunotherapies. Gathering knowledge from cancer and evolutionary biology with physiologically based mathematical models of cell population dynamics should provide oncologists with a rationale to design optimised therapeutic strategies to circumvent drug resistance, that still remains a major pitfall of cancer therapeutics. This article is part of a Special Issue entitled "System Genetics" Guest Editor: Dr. Yudong Cai and Dr. Tao Huang. Copyright © 2016 Elsevier B.V. All rights reserved.

Préoccupations de carrière chez les médecins de travail des groupements de Médecine de travail en Tunisie

PubMed Central

Merchaoui, Irtyah; Chouchène, Asma; Bouanène, Ines; Chaari, Néila; Zrafi, Wassim; Henchi, Adnène; Akrout, Mohamed; Amri, Charfeddine

2017-01-01

Introduction L'insatisfaction de carrière des médecins de travail (MT) peut influencer leur performance et la qualité des prestations fournies. L'objectif de notre étude est d'évaluer la satisfaction au travail des MT du terrain de l'ensemble des Groupements de médecine de travail (GMT) de la Tunisie et préciser les facteurs déterminants. Méthodes Il s'agit d'une étude nationale transversale portant sur les MT de 22 GMT, basée sur le questionnaire, validé SAPHORA JOB. Résultats 58% des MT des GMT étaient insatisfaits de leur carrière. La satisfaction de carrière était statistiquement influencée par le nombre d'entreprises en charge (p=0,016), l'organisation du travail (p=0,010),le ressenti du métier (p=0,011),le salaire (p‹10-3) et l'information sur la réglementation en vigueur (p=0,047). Conclusion L'homogénéisation des grilles salariales et des échelons de carrière des MT des GMT basée sur une révision des textes législatifs est indiquée. L'amélioration de l'organisation et des conditions de travail peut permettre un épanouissement au travail et une amélioration des prestations. PMID:28819472

Dielectric elastomer memory

NASA Astrophysics Data System (ADS)

O'Brien, Benjamin M.; McKay, Thomas G.; Xie, Sheng Q.; Calius, Emilio P.; Anderson, Iain A.

2011-04-01

Life shows us that the distribution of intelligence throughout flexible muscular networks is a highly successful solution to a wide range of challenges, for example: human hearts, octopi, or even starfish. Recreating this success in engineered systems requires soft actuator technologies with embedded sensing and intelligence. Dielectric Elastomer Actuator(s) (DEA) are promising due to their large stresses and strains, as well as quiet flexible multimodal operation. Recently dielectric elastomer devices were presented with built in sensor, driver, and logic capability enabled by a new concept called the Dielectric Elastomer Switch(es) (DES). DES use electrode piezoresistivity to control the charge on DEA and enable the distribution of intelligence throughout a DEA device. In this paper we advance the capabilities of DES further to form volatile memory elements. A set reset flip-flop with inverted reset line was developed based on DES and DEA. With a 3200V supply the flip-flop behaved appropriately and demonstrated the creation of dielectric elastomer memory capable of changing state in response to 1 second long set and reset pulses. This memory opens up applications such as oscillator, de-bounce, timing, and sequential logic circuits; all of which could be distributed throughout biomimetic actuator arrays. Future work will include miniaturisation to improve response speed, implementation into more complex circuits, and investigation of longer lasting and more sensitive switching materials.

Optimal and robust control of a class of nonlinear systems using dynamically re-optimised single network adaptive critic design

NASA Astrophysics Data System (ADS)

Tiwari, Shivendra N.; Padhi, Radhakant

2018-01-01

Following the philosophy of adaptive optimal control, a neural network-based state feedback optimal control synthesis approach is presented in this paper. First, accounting for a nominal system model, a single network adaptive critic (SNAC) based multi-layered neural network (called as NN1) is synthesised offline. However, another linear-in-weight neural network (called as NN2) is trained online and augmented to NN1 in such a manner that their combined output represent the desired optimal costate for the actual plant. To do this, the nominal model needs to be updated online to adapt to the actual plant, which is done by synthesising yet another linear-in-weight neural network (called as NN3) online. Training of NN3 is done by utilising the error information between the nominal and actual states and carrying out the necessary Lyapunov stability analysis using a Sobolev norm based Lyapunov function. This helps in training NN2 successfully to capture the required optimal relationship. The overall architecture is named as 'Dynamically Re-optimised single network adaptive critic (DR-SNAC)'. Numerical results for two motivating illustrative problems are presented, including comparison studies with closed form solution for one problem, which clearly demonstrate the effectiveness and benefit of the proposed approach.

CEINMS: A toolbox to investigate the influence of different neural control solutions on the prediction of muscle excitation and joint moments during dynamic motor tasks.

PubMed

Pizzolato, Claudio; Lloyd, David G; Sartori, Massimo; Ceseracciu, Elena; Besier, Thor F; Fregly, Benjamin J; Reggiani, Monica

2015-11-05

Personalized neuromusculoskeletal (NMS) models can represent the neurological, physiological, and anatomical characteristics of an individual and can be used to estimate the forces generated inside the human body. Currently, publicly available software to calculate muscle forces are restricted to static and dynamic optimisation methods, or limited to isometric tasks only. We have created and made freely available for the research community the Calibrated EMG-Informed NMS Modelling Toolbox (CEINMS), an OpenSim plug-in that enables investigators to predict different neural control solutions for the same musculoskeletal geometry and measured movements. CEINMS comprises EMG-driven and EMG-informed algorithms that have been previously published and tested. It operates on dynamic skeletal models possessing any number of degrees of freedom and musculotendon units and can be calibrated to the individual to predict measured joint moments and EMG patterns. In this paper we describe the components of CEINMS and its integration with OpenSim. We then analyse how EMG-driven, EMG-assisted, and static optimisation neural control solutions affect the estimated joint moments, muscle forces, and muscle excitations, including muscle co-contraction. Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.

Do doctors' attachment styles and emotional intelligence influence patients' emotional expressions in primary care consultations? An exploratory study using multilevel analysis.

PubMed

Cherry, M Gemma; Fletcher, Ian; Berridge, Damon; O'Sullivan, Helen

2018-04-01

To investigate whether and how doctors' attachment styles and emotional intelligence (EI) might influence patients' emotional expressions in general practice consultations. Video recordings of 26 junior doctors consulting with 173 patients were coded using the Verona Coding Definition of Emotional Sequences (VR-CoDES). Doctors' attachment style was scored across two dimensions, avoidance and anxiety, using the Experiences in Close Relationships: Short Form questionnaire. EI was assessed with the Mayer-Salovey-Caruso Emotional Intelligence Test. Multilevel Poisson regressions modelled the probability of patients' expressing emotional distress, considering doctors' attachment styles and EI and demographic and contextual factors. Both attachment styles and EI were significantly associated with frequency of patients' cues, with patient- and doctor-level explanatory variables accounting for 42% of the variance in patients' cues. The relative contribution of attachment styles and EI varied depending on whether patients' presenting complaints were physical or psychosocial in nature. Doctors' attachment styles and levels of EI are associated with patients' emotional expressions in primary care consultations. Further research is needed to investigate how these two variables interact and influence provider responses and patient outcomes. Understanding how doctors' psychological characteristics influence PPC may help to optimise undergraduate and postgraduate medical education. Copyright © 2017 Elsevier B.V. All rights reserved.

The optimal design of stepped wedge trials with equal allocation to sequences and a comparison to other trial designs.

PubMed

Thompson, Jennifer A; Fielding, Katherine; Hargreaves, James; Copas, Andrew

2017-12-01

Background/Aims We sought to optimise the design of stepped wedge trials with an equal allocation of clusters to sequences and explored sample size comparisons with alternative trial designs. Methods We developed a new expression for the design effect for a stepped wedge trial, assuming that observations are equally correlated within clusters and an equal number of observations in each period between sequences switching to the intervention. We minimised the design effect with respect to (1) the fraction of observations before the first and after the final sequence switches (the periods with all clusters in the control or intervention condition, respectively) and (2) the number of sequences. We compared the design effect of this optimised stepped wedge trial to the design effects of a parallel cluster-randomised trial, a cluster-randomised trial with baseline observations, and a hybrid trial design (a mixture of cluster-randomised trial and stepped wedge trial) with the same total cluster size for all designs. Results We found that a stepped wedge trial with an equal allocation to sequences is optimised by obtaining all observations after the first sequence switches and before the final sequence switches to the intervention; this means that the first sequence remains in the control condition and the last sequence remains in the intervention condition for the duration of the trial. With this design, the optimal number of sequences is [Formula: see text], where [Formula: see text] is the cluster-mean correlation, [Formula: see text] is the intracluster correlation coefficient, and m is the total cluster size. The optimal number of sequences is small when the intracluster correlation coefficient and cluster size are small and large when the intracluster correlation coefficient or cluster size is large. A cluster-randomised trial remains more efficient than the optimised stepped wedge trial when the intracluster correlation coefficient or cluster size is small. A cluster-randomised trial with baseline observations always requires a larger sample size than the optimised stepped wedge trial. The hybrid design can always give an equally or more efficient design, but will be at most 5% more efficient. We provide a strategy for selecting a design if the optimal number of sequences is unfeasible. For a non-optimal number of sequences, the sample size may be reduced by allowing a proportion of observations before the first or after the final sequence has switched. Conclusion The standard stepped wedge trial is inefficient. To reduce sample sizes when a hybrid design is unfeasible, stepped wedge trial designs should have no observations before the first sequence switches or after the final sequence switches.

Cross-correlation redshift calibration without spectroscopic calibration samples in DES Science Verification Data

NASA Astrophysics Data System (ADS)

Davis, C.; Rozo, E.; Roodman, A.; Alarcon, A.; Cawthon, R.; Gatti, M.; Lin, H.; Miquel, R.; Rykoff, E. S.; Troxel, M. A.; Vielzeuf, P.; Abbott, T. M. C.; Abdalla, F. B.; Allam, S.; Annis, J.; Bechtol, K.; Benoit-Lévy, A.; Bertin, E.; Brooks, D.; Buckley-Geer, E.; Burke, D. L.; Carnero Rosell, A.; Carrasco Kind, M.; Carretero, J.; Castander, F. J.; Crocce, M.; Cunha, C. E.; D'Andrea, C. B.; da Costa, L. N.; Desai, S.; Diehl, H. T.; Doel, P.; Drlica-Wagner, A.; Fausti Neto, A.; Flaugher, B.; Fosalba, P.; Frieman, J.; García-Bellido, J.; Gaztanaga, E.; Gerdes, D. W.; Giannantonio, T.; Gruen, D.; Gruendl, R. A.; Gutierrez, G.; Honscheid, K.; Jain, B.; James, D. J.; Jeltema, T.; Krause, E.; Kuehn, K.; Kuhlmann, S.; Kuropatkin, N.; Lahav, O.; Li, T. S.; Lima, M.; March, M.; Marshall, J. L.; Martini, P.; Melchior, P.; Ogando, R. L. C.; Plazas, A. A.; Romer, A. K.; Sanchez, E.; Scarpine, V.; Schindler, R.; Schubnell, M.; Sevilla-Noarbe, I.; Smith, M.; Soares-Santos, M.; Sobreira, F.; Suchyta, E.; Swanson, M. E. C.; Tarle, G.; Thomas, D.; Vikram, V.; Walker, A. R.; Wechsler, R. H.

2018-06-01

Galaxy cross-correlations with high-fidelity redshift samples hold the potential to precisely calibrate systematic photometric redshift uncertainties arising from the unavailability of complete and representative training and validation samples of galaxies. However, application of this technique in the Dark Energy Survey (DES) is hampered by the relatively low number density, small area, and modest redshift overlap between photometric and spectroscopic samples. We propose instead using photometric catalogues with reliable photometric redshifts for photo-z calibration via cross-correlations. We verify the viability of our proposal using redMaPPer clusters from the Sloan Digital Sky Survey (SDSS) to successfully recover the redshift distribution of SDSS spectroscopic galaxies. We demonstrate how to combine photo-z with cross-correlation data to calibrate photometric redshift biases while marginalizing over possible clustering bias evolution in either the calibration or unknown photometric samples. We apply our method to DES Science Verification (DES SV) data in order to constrain the photometric redshift distribution of a galaxy sample selected for weak lensing studies, constraining the mean of the tomographic redshift distributions to a statistical uncertainty of Δz ˜ ±0.01. We forecast that our proposal can, in principle, control photometric redshift uncertainties in DES weak lensing experiments at a level near the intrinsic statistical noise of the experiment over the range of redshifts where redMaPPer clusters are available. Our results provide strong motivation to launch a programme to fully characterize the systematic errors from bias evolution and photo-z shapes in our calibration procedure.

Cross-correlation redshift calibration without spectroscopic calibration samples in DES Science Verification Data

DOE PAGES

Davis, C.; Rozo, E.; Roodman, A.; ...

2018-03-26

Galaxy cross-correlations with high-fidelity redshift samples hold the potential to precisely calibrate systematic photometric redshift uncertainties arising from the unavailability of complete and representative training and validation samples of galaxies. However, application of this technique in the Dark Energy Survey (DES) is hampered by the relatively low number density, small area, and modest redshift overlap between photometric and spectroscopic samples. We propose instead using photometric catalogs with reliable photometric redshifts for photo-z calibration via cross-correlations. We verify the viability of our proposal using redMaPPer clusters from the Sloan Digital Sky Survey (SDSS) to successfully recover the redshift distribution of SDSS spectroscopic galaxies. We demonstrate how to combine photo-z with cross-correlation data to calibrate photometric redshift biases while marginalizing over possible clustering bias evolution in either the calibration or unknown photometric samples. We apply our method to DES Science Verification (DES SV) data in order to constrain the photometric redshift distribution of a galaxy sample selected for weak lensing studies, constraining the mean of the tomographic redshift distributions to a statistical uncertainty ofmore » $$\\Delta z \\sim \\pm 0.01$$. We forecast that our proposal can in principle control photometric redshift uncertainties in DES weak lensing experiments at a level near the intrinsic statistical noise of the experiment over the range of redshifts where redMaPPer clusters are available. Here, our results provide strong motivation to launch a program to fully characterize the systematic errors from bias evolution and photo-z shapes in our calibration procedure.« less

Cross-correlation redshift calibration without spectroscopic calibration samples in DES Science Verification Data

DOE Office of Scientific and Technical Information (OSTI.GOV)

Davis, C.; Rozo, E.; Roodman, A.

Galaxy cross-correlations with high-fidelity redshift samples hold the potential to precisely calibrate systematic photometric redshift uncertainties arising from the unavailability of complete and representative training and validation samples of galaxies. However, application of this technique in the Dark Energy Survey (DES) is hampered by the relatively low number density, small area, and modest redshift overlap between photometric and spectroscopic samples. We propose instead using photometric catalogs with reliable photometric redshifts for photo-z calibration via cross-correlations. We verify the viability of our proposal using redMaPPer clusters from the Sloan Digital Sky Survey (SDSS) to successfully recover the redshift distribution of SDSS spectroscopic galaxies. We demonstrate how to combine photo-z with cross-correlation data to calibrate photometric redshift biases while marginalizing over possible clustering bias evolution in either the calibration or unknown photometric samples. We apply our method to DES Science Verification (DES SV) data in order to constrain the photometric redshift distribution of a galaxy sample selected for weak lensing studies, constraining the mean of the tomographic redshift distributions to a statistical uncertainty ofmore » $$\\Delta z \\sim \\pm 0.01$$. We forecast that our proposal can in principle control photometric redshift uncertainties in DES weak lensing experiments at a level near the intrinsic statistical noise of the experiment over the range of redshifts where redMaPPer clusters are available. Here, our results provide strong motivation to launch a program to fully characterize the systematic errors from bias evolution and photo-z shapes in our calibration procedure.« less

Drug-coated balloons for de novo lesions in small coronary arteries: rationale and design of BASKET-SMALL 2.

PubMed

Gilgen, Nicole; Farah, Ahmed; Scheller, Bruno; Ohlow, Marc-Alexander; Mangner, Norman; Weilenmann, Daniel; Wöhrle, Jochen; Jamshidi, Peiman; Leibundgut, Gregor; Möbius-Winkler, Sven; Zweiker, Robert; Krackhardt, Florian; Butter, Christian; Bruch, Leonhard; Kaiser, Christoph; Hoffmann, Andreas; Rickenbacher, Peter; Mueller, Christian; Stephan, Frank-Peter; Coslovsky, Michael; Jeger, Raban

2018-05-01

The treatment of coronary small vessel disease (SVD) remains an unresolved issue. Drug-eluting stents (DES) have limited efficacy due to increased rates of instent-restenosis, mainly caused by late lumen loss. Drug-coated balloons (DCB) are a promising technique because native vessels remain structurally unchanged. Basel Stent Kosten-Effektivitäts Trial: Drug-Coated Balloons vs. Drug-Eluting Stents in Small Vessel Interventions (BASKET-SMALL 2) is a multicenter, randomized, controlled, noninferiority trial of DCB vs DES in native SVD for clinical endpoints. Seven hundred fifty-eight patients with de novo lesions in vessels <3 mm in diameter and an indication for percutaneous coronary intervention such as stable angina pectoris, silent ischemia, or acute coronary syndromes are randomized 1:1 to angioplasty with DCB vs implantation of a DES after successful initial balloon angioplasty. The primary endpoint is the combination of cardiac death, nonfatal myocardial infarction, and target-vessel revascularization up to 1 year. Secondary endpoints include stent thrombosis, Bleeding Academic Research Consortium (BARC) type 3 to 5 bleeding, and long-term outcome up to 3 years. Based on clinical endpoints after 1 year, we plan to assess the noninferiority of DCB compared to DES in patients undergoing primary percutaneous coronary intervention for SVD. Results will be available in the second half of 2018. This study will compare DCB and DES regarding long-term safety and efficacy for the treatment of SVD in a large all-comer population. © 2018 The Authors. Clinical Cardiology published by Wiley Periodicals, Inc.

Critical aspects for the reliable headspace analysis of plants cultivated in vitro.

PubMed

Maes, K; Vercammen, J; Pham-Tuan, H; Sandra, P; Debergh, P C

2001-01-01

Various factors controlling the recoveries of volatile organic compounds in vitro headspace analysis of tomato plants (Lycopersicon esculentum Mill. 'Moneymaker'), sampled using solid phase micro-extraction, were evaluated and optimised. The variations in composition of the headspaces were determined as a function of time, and following in vitro wounding of the plant.

An Overview of the Canadian Forces’ Second Generation Capability-Based Planning Analytical Process

DTIC Science & Technology

2010-09-01

gestion et intgration des capacités Feuille de route des capacits stratégiques Produits clès Plan d’investissement Plan de capacités de défense...méthodes de recherche opérationnelle objectives et subjectives permet- tant la mise en œuvre du volet « planification, gestion et intégration des ...pacités, la gestion des capacités et l’intégration des capacités. Le processus comprend des intrants, des méthodes

Cholesteryl ester transfer protein inhibition enhances endothelial repair and improves endothelial function in the rabbit.

PubMed

Wu, Ben J; Shrestha, Sudichhya; Ong, Kwok L; Johns, Douglas; Hou, Liming; Barter, Philip J; Rye, Kerry-Anne

2015-03-01

High-density lipoproteins (HDLs) can potentially protect against atherosclerosis by multiple mechanisms, including enhancement of endothelial repair and improvement of endothelial function. This study asks if increasing HDL levels by inhibiting cholesteryl ester transfer protein activity with the anacetrapib analog, des-fluoro-anacetrapib, enhances endothelial repair and improves endothelial function in New Zealand White rabbits with balloon injury of the abdominal aorta. New Zealand White rabbits received chow or chow supplemented with 0.07% or 0.14% (wt/wt) des-fluoro-anacetrapib for 8 weeks. Endothelial denudation of the abdominal aorta was carried out after 2 weeks. The animals were euthanized 6 weeks postinjury. Treatment with 0.07% and 0.14% des-fluoro-anacetrapib reduced cholesteryl ester transfer protein activity by 81±4.9% and 92±12%, increased plasma apolipoprotein A-I levels by 1.4±0.1-fold and 1.5±0.1-fold, increased plasma HDL-cholesterol levels by 1.8±0.2-fold and 1.9±0.1-fold, reduced intimal hyperplasia by 37±11% and 51±10%, and inhibited vascular cell proliferation by 25±6.1% and 35±6.7%, respectively. Re-endothelialization of the injured aorta increased from 43±6.7% (control) to 69±6.6% and 76±7.7% in the 0.07% and 0.14% des-fluoro-anacetrapib-treated animals, respectively. Aortic ring relaxation and guanosine 3',5'-cyclic monophosphate production in response to acetylcholine were also improved. Incubation of HDLs from the des-fluoro-anacetrapib-treated animals with human coronary artery endothelial cells increased cell proliferation and migration relative to control. These effects were abolished by knockdown of scavenger receptor-B1 and PDZ domain-containing protein 1 and by pharmacological inhibition of phosphatidylinositol-4,5-bisphosphate 3-kinase/Akt. Increasing HDL levels by inhibiting cholesteryl ester transfer protein reduces intimal thickening and regenerates functional endothelium in damaged New Zealand White rabbit aortas in an scavenger receptor-B1-dependent and phosphatidylinositol-4,5-bisphosphate 3-kinase/Akt-dependent manner. © 2015 American Heart Association, Inc.

Paternité des articles et intérêts concurrents : une analyse des recommandations aux auteurs des journaux traitant de pratique pharmaceutique

PubMed Central

Courbon, Ève; Tanguay, Cynthia; Lebel, Denis; Bussières, Jean-François

2014-01-01

RÉSUMÉ Contexte : La présence d’auteurs honorifiques et fantômes ainsi que les intérêts concurrents représentent des difficultés bien documentées, liées à la publication d’articles scientifiques. Il existe des lignes directrices encadrant la rédaction et la publication de manuscrits scientifiques, notamment celles de l’International Committee of Medical Journal Editors (ICMJE). Objectifs : L’objectif principal de cette étude descriptive et transversale visait à recenser les instructions portant sur la paternité des articles et les intérêts concurrents provenant des recommandations aux auteurs des journaux traitant de pratique pharmaceutique. L’objectif secondaire visait à déterminer des mesures correctrices pour une paternité des articles plus transparente. Méthode : La recherche a débuté par l’identification des journaux traitant de pratique pharmaceutique. La consultation des instructions aux auteurs des journaux a permis ensuite de recenser les recommandations destinées à éviter les problèmes de paternité des articles et d’intérêts concurrents. Finalement, les membres de l’équipe de recherche se sont consultés afin de définir des mesures correctrices possibles à l’intention des chercheurs. Résultats : Des 232 journaux traitant de pharmacie, 33 ont été définis comme traitant de pratique pharmaceutique. Un total de 24 (73 %) journaux mentionnaient suivre la politique de l’ICMJE, 14 (42 %) demandaient aux auteurs de remplir un formulaire de déclaration d’intérêts concurrents au moment de la soumission de l’article, 17 (52 %) présentaient une définition de la qualité d’auteur et 5 (15 %) demandaient de détailler les contributions de chaque auteur. Une grille de 40 critères a été élaborée pour définir l’attribution du statut d’auteur. Conclusion : Moins de la moitié des journaux demandait aux auteurs de transmettre un formulaire de déclaration des intérêts concurrents au moment de la soumission d’un article et seulement la moitié des journaux avait donné une définition de la qualité d’auteur. La publication scientifique de travaux sur les pratiques pharmaceutiques n’est pas à l’abri des manques de transparence liés à la publication. L’utilisation d’une grille décrivant la contribution de chaque auteur et la publication en ligne des travaux peuvent contribuer à limiter ces risques. PMID:24970938