Optimisation des proprietes fonctionnelles des alliages a memoire de forme suite a l'application de traitements thermomecaniques

NASA Astrophysics Data System (ADS)

Demers, Vincent

L'objectif de ce projet est de determiner les conditions de laminage et la temperature de traitement thermique maximisant les proprietes fonctionnelles de l'alliage a memoire de forme Ti-Ni. Les specimens sont caracterises par des mesures de calorimetrie, de microscopie optique, de gene ration de contrainte, de deformation recuperable et des essais mecaniques. Pour un cycle unique, l'utilisation d'un taux d'ecrouissage e=1.5 obtenu avec l'application d'une force de tension FT = 0.1sigma y et d'une huile minerale resulte en un echantillon droit, sans microfissure et qui apres un recuit a 400°C, produit un materiau nanostructure manifestant des proprietes fonctionnelles deux fois plus grandes que le meme materiau ayant une structure polygonisee. Pour des cycles repetes, les memes conditions de laminage sont valables mais le niveau de deformation optimal est situe entre e=0.75-2, et depend particulierement du mode de sollicitation, du niveau de stabilisation et du nombre de cycles a la rupture requis par l'application.

Basis for the development of sustainable optimisation indicators for activated sludge wastewater treatment plants in the Republic of Ireland.

PubMed

Gordon, G T; McCann, B P

2015-01-01

This paper describes the basis of a stakeholder-based sustainable optimisation indicator (SOI) system to be developed for small-to-medium sized activated sludge (AS) wastewater treatment plants (WwTPs) in the Republic of Ireland (ROI). Key technical publications relating to best practice plant operation, performance audits and optimisation, and indicator and benchmarking systems for wastewater services are identified. Optimisation studies were developed at a number of Irish AS WwTPs and key findings are presented. A national AS WwTP manager/operator survey was carried out to verify the applied operational findings and identify the key operator stakeholder requirements for this proposed SOI system. It was found that most plants require more consistent operational data-based decision-making, monitoring and communication structures to facilitate optimised, sustainable and continuous performance improvement. The applied optimisation and stakeholder consultation phases form the basis of the proposed stakeholder-based SOI system. This system will allow for continuous monitoring and rating of plant performance, facilitate optimised operation and encourage the prioritisation of performance improvement through tracking key operational metrics. Plant optimisation has become a major focus due to the transfer of all ROI water services to a national water utility from individual local authorities and the implementation of the EU Water Framework Directive.

Integrated Design Analysis and Optimisation of Aircraft Structures (L’Analyse pour la Conception Integree et l’Optimisation des Structures d’Aeronefs)

DTIC Science & Technology

1992-02-01

Division (Code RM) ONERA Office of Aeronautics & Space Technology 29 ave de la Division Leclerc NASA Hq 92320 Chfitillon Washington DC 20546 France United...Vector of thickness variables. V’ = [ t2 ........ tN Vector of thickness changes. AV ’= [rt, 5t2 ......... tNJ TI 7-9 Vector of strain derivatives. F...ds, ds, I d, 1i’,= dt, dr2 ........ dt--N Vector of buckling derivatives. dX d). , dt1 dt2 dtN Then 5F= Vs’i . AV and SX V,’. AV The linearised

Etude des phenomenes dynamiques ultrarapides et des caracteristiques impulsionnelles d'emission terahertz du supraconducteur YBCO

NASA Astrophysics Data System (ADS)

Savard, Stephane

Les premieres etudes d'antennes a base de supraconducteurs a haute temperature critique emettant une impulsion electromagnetique dont le contenu en frequence se situe dans le domaine terahertz remontent a 1996. Une antenne supraconductrice est formee d'un micro-pont d'une couche mince supraconductrice sur lequel un courant continu est applique. Un faisceau laser dans le visible est focalise sur le micro-pont et place le supraconducteur dans un etat hors-equilibre ou des paires sont brisees. Grace a la relaxation des quasiparticules en surplus et eventuellement de la reformation des paires supraconductrices, nous pouvons etudier la nature de la supraconductivite. L'analyse de la cinetique temporelle du champ electromagnetique emis par une telle antenne terahertz supraconductrice s'est averee utile pour decrire qualitativement les caracteristiques de celle-ci en fonction des parametres d'operation tels que le courant applique, la temperature et la puissance d'excitation. La comprehension de l'etat hors-equilibre est la cle pour comprendre le fonctionnement des antennes terahertz supraconductrices a haute temperature critique. Dans le but de comprendre ultimement cet etat hors-equilibre, nous avions besoin d'une methode et d'un modele pour extraire de facon plus systematique les proprietes intrinseques du materiau qui compose l'antenne terahertz a partir des caracteristiques d'emission de celle-ci. Nous avons developpe une procedure pour calibrer le spectrometre dans le domaine temporel en utilisant des antennes terahertz de GaAs bombarde aux protons H+ comme emetteur et detecteur. Une fois le montage calibre, nous y avons insere une antenne emettrice dipolaire de YBa 2Cu3O7-delta . Un modele avec des fonctions exponentielles de montee et de descente du signal est utilise pour lisser le spectre du champ electromagnetique de l'antenne de YBa 2Cu3O7-delta, ce qui nous permet d'extraire les proprietes intrinseques de ce dernier. Pour confirmer la validite du modele choisi, nous avons mesure les proprietes intrinseques du meme echantillon de YBa2Cu3O7- delta avec la technique pompe-visible et sonde-terahertz donnant, elle aussi, acces aux temps caracteristiques regissant l'evolution hors-equilibre de ce materiau. Dans le meilleur scenario, ces temps caracteristiques devraient correspondre a ceux evalues grace a la modelisation des antennes. Un bon controle des parametres de croissance des couches minces supraconductrices et de fabrication du dispositif nous a permis de realiser des antennes d'emission terahertz possedant d'excellentes caracteristiques en terme de largeur de bande d'emission (typiquement 3 THz) exploitables pour des applications de spectroscopie resolue dans le domaine temporel. Le modele developpe et retenu pour le lissage du spectre terahertz decrit bien les caracteristiques de l'antenne supraconductrice pour tous les parametres d'operation. Toutefois, le lien avec la technique pompe-sonde lors de la comparaison des proprietes intrinseques n'est pas direct malgre que les deux techniques montrent que le temps de relaxation des porteurs augmente pres de la temperature critique. Les donnees en pompe-sonde indiquent que la mesure du temps de relaxation depend de la frequence de la sonde, ce qui complique la correspondance des proprietes intrinseques entre les deux techniques. De meme, le temps de relaxation extrait a partir du spectre de l'antenne terahertz augmente en s'approchant de la temperature critique (T c) de YBa2Cu 3O7-delta. Le comportement en temperature du temps de relaxation correspond a une loi de puissance qui est fonction de l'inverse du gap supraconducteur avec un exposant 5 soit 1/Delta 5(T). Le travail presente dans cette these permet de mieux decrire les caracteristiques des antennes supraconductrices a haute temperature critique et de les relier aux proprietes intrinseques du materiau qui les compose. De plus, cette these presente les parametres a ajuster comme le courant applique, la puissance de la pompe, la temperature d'operation, etc, afin d'optimiser l'emission et les performances de ces antennes supraconductrices entre autres pour maximiser leur etendue en frequence dans une perspective d'application en spectroscopie terahertz. Cependant, plusieurs des resultats obtenus soulevent la difficulte de decrire l'etat hors-equilibre et la necessite de developper une theorie pour le supraconducteur YBa2 Cu3O7-delta

Les Cicatrices Retractiles Post-Brulures Du Membre Inferieur Chez L’Enfant

PubMed Central

Sankale, A.A.; Manyacka Ma Nyemb, P.; Coulibaly, N.F.; Ndiaye, A.; Ndoye, M.

2010-01-01

Summary Il s'agit d'une étude faisant ressortir les aspects épidémiologiques, cliniques et thérapeutiques des séquelles de brûlures du membre inférieur chez l'enfant, à propos de 42 cas colligés au service de chirurgie infantile de l'Hôpital Aristide Le Dantec (Sénégal). L'âge moyen retrouvé est de 5 ans et 3 mois, et le sex-ratio garçons/filles de 1,8/1. La brûlure thermique est causée par une flamme dans 33% des cas, par un liquide chaud dans 21% des cas, et par des braises dans 21% des cas. Les cicatrices rétractiles intéressent le genou et le creux poplité dans 47% des cas et le pied dans 45% des cas. Elles sont bilatérales dans 21% des cas, et concernent une autre localisation associée dans 21% des cas. Quant aux brides, 21% ont bénéficié d'une chirurgie, avec un délai moyen de 3 ans et 2 mois après la brûlure. Cette procédure chirurgicale consiste en une plastie en Z dans 91% des cas, à laquelle est associée une greffe de peau dans 54% des cas. Une rééducation fonctionnelle est pratiquée chez 54% des opérés. Parallèlement aux données de la littérature, nos résultats montrent que l'optimisation de la prise en charge passe par une meilleure prévention des accidents domestiques et une bonne codification thérapeutique. PMID:21991202

Evaluation experimentale et theorique du comportement a la flexion de nouveaux poteaux en materiaux composites

NASA Astrophysics Data System (ADS)

Metiche, Slimane

La demande croissante en poteaux pour les differents reseaux d'electricite et de telecommunications a rendu necessaire l'utilisation de materiaux innovants, qui preservent l'environnement. La majorite des poteaux electriques existants au Canada ainsi qu'a travers le monde, sont fabriques a partir de materiaux traditionnels tel que le bois, le beton ou l'acier. Les motivations des industriels et des chercheurs a penser a d'autres solutions sont diverses, citons entre autre: La limitation en longueur des poteaux en bois ainsi que la vulnerabilite des poteaux fabriques en beton ou en acier aux agressions climatiques. Les nouveaux poteaux en materiaux composites se presentent comme de bons candidats a cet effet, cependant; leur comportement structural n'est pas connu et des etudes theoriques et experimentales approfondies sont necessaires avant leur mise en marche a grande echelle. Un programme de recherche intensif comportant plusieurs projets experimentaux, analytiques et numeriques est en cours a l'Universite de Sherbrooke afin d'evaluer le comportement a court et a long termes de ces nouveaux poteaux en Polymeres Renforces de Fibres (PRF). C'est dans ce contexte que s'inscrit la presente these, et notre recherche vise a evaluer le comportement a la flexion de nouveaux poteaux tubulaires coniques fabriques en materiaux composites par enroulement filamentaire et ce, a travers une etude theorique, ainsi qu'a travers une serie d'essais de flexion en "grandeur reelle" afin de comprendre le comportement structural de ces poteaux, d'optimiser la conception et de proposer une procedure de dimensionnement pour les utilisateurs. Les poteaux en Polymeres Renforces de Fibres (PRF) etudies dans cette these sont fabriques avec une resine epoxyde renforcee de fibres de verre type E. Chaque type poteaux est constitue principalement de trois zones ou les proprietes geometriques (epaisseur, diametre) et les proprietes mecaniques sont differentes d'une zone a l'autre. La difference entre ces proprietes est due au nombre de couches utilisees dans chaque zone ainsi qu'a l'orientation des fibres de chaque couche. Un total de vingt-trois prototypes de dimensions differentes; ont ete testes en flexion jusqu'a la rupture. Deux types de fibres de verre de masses lineaires differentes, ont ete utilisees afin d'evaluer l'effet du type de fibres sur le comportement a la flexion. Un nouveau montage experimental permettant de tester tous les types de poteaux en PRF a ete dimensionne et fabrique selon les recommandations decrites dans les normes ASTM D 4923-01 et ANSI C 136.20-2005. Un modele analytique base sur la theorie des poutres en elasticite lineaire est propose dans cette these. Ce modele predit avec une bonne precision le comportement experimental charge---deflexion ainsi que la deflexion maximale au sommet des poteaux en PRF; constitues de plusieurs zones de caracteristiques geometriques et mecaniques differentes. Une procedure de dimensionnement des poteaux en PRF, basee sur les resultats experimentaux obtenus dans le cadre de la presente these, est egalement proposee. Les resultats obtenus dans le cadre de la presente these permettront le developpement et l'amelioration des regles de conception utiles et pratiques a l'usage des concepteurs et des industriels du domaine des poteaux en PRF. Les retombees de cette recherche sont a la fois economiques et technologiques, car les resultats obtenus constitueront une banque de donnees qui contribueront au developpement des normes de calcul, et par consequent a l'optimisation des materiaux utilises, et serviront a valider de futurs resultats et modeles theoriques.

Optimisation de l'émission du continuum femtoseconde de lumière blanche entre 600 nm et 800 nm

NASA Astrophysics Data System (ADS)

Ramstein, S.; Mottin, S.

2005-06-01

Un dispositif de spectroscopie avec résolution du temps de vol des photons en milieu diffus a été développé. Celui-ci repose sur l'utilisation d'un continuum de lumière blanche généré par focalisation d'un laser amplifié (830 nm, 1 kHz, 0.5 W, 170 fs) dans de l'eau déminéralisée. Afin d'optimiser spectralement et en puissance la source blanche sur la fenêtre spectrale 600 800 nm, une étude de la mise en forme spatio-temporelle avant autofocalisation de l'impulsion laser par le milieu a été menée. Cette mise en forme est effectuée de manière spatiale en changeant la focale de la lentille de focalisation et de manière temporelle en changeant le taux de compression de l'impulsion. L'étude montre que le cône de lumière émise possède plus de puissance dans la fenêtre spectrale d'intérêt pour des focales longues. Sur la fenêtre 600-800 nm, le rendement énergétique intégré varie de 5%, avec une focalef=6cm, à 15%, avec une focale f = 30 cm. La mise en forme temporelle montre des effets similaires avec les mêmes ordres de grandeur.

Comparaison de méthodes d'identification des paramètres d'une machine asynchrone

NASA Astrophysics Data System (ADS)

Bellaaj-Mrabet, N.; Jelassi, K.

1998-07-01

Interests, in Genetic Algorithms (G.A.) expands rapidly. This paper consists initially to apply G.A. for identifying induction motor parameters. Next, we compare the performances with classical methods like Maximum Likelihood and classical electrotechnical methods. These methods are applied on three induction motors of different powers to compare results following a set of criteria. Les algorithmes génétiques sont des méthodes adaptatives de plus en plus utilisée pour la résolution de certains problèmes d'optimisation. Le présent travail consiste d'une part, à mettre en œuvre un A.G sur des problèmes d'identification des machines électriques, et d'autre part à comparer ses performances avec les méthodes classiques tels que la méthode du maximum de vraisemblance et la méthode électrotechnique basée sur des essais à vides et en court-circuit. Ces méthodes sont appliquées sur des machines asynchrones de différentes puissances. Les résultats obtenus sont comparés selon certains critères, permettant de conclure sur la validité et la performance de chaque méthode.

Approaches to S&T Cost Modeling at the U.S. Air Force Research Laboratory/Vehicle Aeronautics Directorate

DTIC Science & Technology

2000-09-01

fassent, si rien ne change par ailleurs. plus proche de l’ing~ni~rie du vivant . Une vdritable optimisation des 6ldinents de soutien logistique A bord...s souvent dans les arbres l’utilisation en service. fonctionnels, peuvent 8tre recueillies plus facilement dans un tableau crois6 avec les divers syst

Effet de l'énergie du faisceau d'ions servant à l'assistance du dépôt de matériaux organiques utilisés pour réaliser des diodes électroluminescentes

NASA Astrophysics Data System (ADS)

Antony, R.; Moliton, A.; Ratier, B.

1998-06-01

Light emitting diode based on the structure ITO/Alq3/Ca-Al lead to enhanced quantum efficiency when the Alq3 active layer is obtained by IBAD (Ion Beam Assisted Deposition): with Iodine ions, the optimization (quantum efficiency multiplied by a factor10) is obtained for an ion energy equal to 100eV. La réalisation de diodes électroluminescentes basées sur la structure ITO/Alq3/Ca-Al conduit à des performances améliorées lorsque le dépôt de la couche active Alq3 est effectué avec l'assistance d'un faisceau d'ions; l'optimisation (rendement quantique interne accru d'un ordre de grandeur) correspond à des ions Iode d'énergie 100eV.

Amelioration de l'efficacite energetique du procede d'electrolyse de l'aluminium conception d'un nouveau bloc cathodique

NASA Astrophysics Data System (ADS)

Blais, Mathieu

Au Quebec, les alumineries sont de grandes consommatrices d'energie electrique, soit pres de 14 % de la puissance installee d'Hydro-Quebec. Dans ce contexte, des petits gains en efficacite energetique des cuves d'electrolyse pourraient avoir un impact important sur la reduction globale de la consommation d'electricite. Le projet de maitrise decrit dans cette etude repond a la problematique suivante : comment l'optimisation de la geometrie d'un bloc cathodique en vue d'uniformiser la densite de courant peut augmenter l'efficacite energetique et la duree de vie de la cuve d'aluminium? Le but premier du projet est de modifier la geometrie en vue d'ameliorer le comportement thermoelectrique des blocs cathodiques et d'accroitre par le fait meme l'efficacite energetique du procede de production d'aluminium. La mauvaise distribution de la densite de courant dans la cuve est responsable de certains problemes energetiques ayant des impacts negatifs sur l'economie et l'environnement. Cette non-uniformite de la distribution du courant induit une usure prematuree de la surface de la cathode et contribue a reduire la stabilite magnetohydrodynamique de la nappe de metal liquide. Afin de quantifier les impacts que peut avoir l'uniformisation de la densite de courant a travers le bloc cathodique, un modele d'un bloc cathodique d'une cuve de la technologie AP-30 a ete concu et analyse par elements finis. A partir de son comportement thermoelectrique et de donnees experimentales d'une cuve AP-30 tirees de la litterature, une correlation entre le profil de densite de courant a la surface du bloc et le taux d'erosion local au meme endroit a ete creee. Cette relation correspond au modele predictif de la duree de vie de tout bloc du meme materiau a partir de son profil de densite de courant. Ensuite, une programmation a ete faite incorporant dans une meme fonction cout les impacts economiques de la duree de vie, de la chute de voltage cathodique et de l'utilisation de nouveaux materiaux. Ceci a permis d'evaluer les benefices faits a partir d'un bloc modifie par rapport au bloc de reference. Plusieurs parametres geometriques du bloc sont variables sur un domaine realiste et l'integration d'un composant en materiau plus conducteur y a egalement ete etudiee. Utilisant des outils mathematiques d'optimisation, un design de bloc optimal a pu etre trouve. Les resultats demontrent qu'il est possible de generer des economies a partir de la modification du bloc. Il est egalement prouve que l'uniformisation de la densite de courant a travers le bloc peut apporter de grands avantages economiques et environnementaux dans le procede d'electrolyse de l'aluminium. Les resultats de cette etude serviront d'arguments pour les chercheurs dans l'industrie a savoir s'il vaut la peine d'investir ou non dans la fabrication d'un prototype experimental souvent tres couteux. Mots-cles : Efficacite energetique, electrolyse de l'aluminium, cathode, simulation thermoelectrique, uniformisation de la densite de courant, optimisation.

Contrôle cohérent de la dynamique de fragmentation d'agrégats alcalins

NASA Astrophysics Data System (ADS)

Lindinger, A.; Lupulescu, C.; Le Roux, J.; Bartelt, A.; Vajda, Š.; Wöste, L.

2004-11-01

Les agrégats métalliques présentent des propriétés extraordinaires, en particulier chimiques et catalytiques, qui dépendent fortement de leur taille. Ce comportement en fait des candidats idéaux pour l'analyse en temps réel de processus photo-induits ultrarapides, le but ultime étant la conduite de scénarios de contrôle cohérent. Nous avons réalisé des expériences d'ionisation multiphotonique non stationnaire sur de petits agrégats alcalins de différentes tailles et dans différents états électroniques rovibrationnels, y compris leur état fondamental, sondant ainsi leur dynamique ondulatoire, leur orientation structurelle, leur transfert de charge et leur dissociation. Les processus observés dépendent grandement des paramètres du faisceau laser d'excitation, tels que sa phase, son amplitude et sa durée ; cette sensibilité plaide pour l'emploi d'un système de contrôle rétroactif permettant de générer les formes d'impulsion optimales. Les caractéristiques spectrales et temporelles de ces dernières reflètent les propriétés du système étudié ainsi que les processus photochimiques que l'irradiation y induit. Nous présentons d'abord la dynamique vibrationelle d'états électroniques excités, liés, dissociatifs et prédissociatifs, des dimères et trimères alcalins. Suit une description du principe d'observation par pompage optique par effet Raman stimulé de la dynamique d'un paquet d'onde dans l'état électronique fondamental. Puisque les paramètres de l'impulsion d'excitation influencent de façon significative le poids des différentes trajectoires dans l'espace des phases, nous avons mené des expériences sur les canaux de fragmentation concurrents d'une réaction photo-induite, en étudiant les différents embranchements des voies d'ionisation et de fragmentation de Na{2}K excité électroniquement. L'utilisation d'un algorithme évolutif, pour l'optimisation de la phase et de l'amplitude de l'onde électromagnétique appliquée, permit d'influencer significativement la quantité résultante d'ions parents ou fragments. Des propriétés intéressantes sont déduites de la forme des impulsions laser optimales obtenues, qui révèlent la période de vibration moléculaire et qui, combinées aux courbes de potentiel, permettent de proposer les trajectoires que l'optimisation impose aux paquets d'onde. Pour finir, nous avons étudié comment une variété plus grande d'agrégats, en contribuant au canal de fragmentation NaK, influe sur la forme optimale d'impulsion. Là encore, la structure de cette dernière apporte des éclaircissements sur les canaux de fragmentation empruntés durant le processus de contrôle.

Untersuchung des Funktionsumfangs und der fachlichen Grundlagen des LAMBDA Tools (Examination of the functional scope and the technical basics of the LAMBDA- Tools)

DTIC Science & Technology

2017-01-01

Copyrighted. (1 and 20) ABSTRACT (Maximum 200 words) The founding years of Operations Research (OR) are the years just before and during the Second World... Research ............................................................................................. 1 1.2 Teilgebiete des Operations Research ...2 1.3 Madelle des Operations Research

Identification des parametres du moteur de l'avion Cessna Citation X pour la phase de croisiere a partir des tests en vol et a base des reseaux de neurones =

NASA Astrophysics Data System (ADS)

Zaag, Mahdi

La disponibilite des modeles precis des avions est parmi les elements cles permettant d'assurer leurs ameliorations. Ces modeles servent a ameliorer les commandes de vol et de concevoir de nouveaux systemes aerodynamiques pour la conception des ailes deformables des avions. Ce projet consiste a concevoir un systeme d'identification de certains parametres du modele du moteur de l'avion d'affaires americain Cessna Citation X pour la phase de croisiere a partir des essais en vol. Ces essais ont ete effectues sur le simulateur de vol concu et fabrique par CAE Inc. qui possede le niveau D de la dynamique de vol. En effet, le niveau D est le plus haut niveau de precision donne par l'autorite federale de reglementation FAA de l'aviation civile aux Etats-Unis. Une methodologie basee sur les reseaux de neurones optimises a l'aide d'un algorithme intitule le "grand deluge etendu" est utilisee dans la conception de ce systeme d'identification. Plusieurs tests de vol pour differentes altitudes et differents nombres de Mach ont ete realises afin de s'en servir comme bases de donnees pour l'apprentissage des reseaux de neurones. La validation de ce modele a ete realisee a l'aide des donnees du simulateur. Malgre la nonlinearite et la complexite du systeme, les parametres du moteur ont ete tres bien predits pour une enveloppe de vol determinee. Ce modele estime pourrait etre utilise pour des analyses de fonctionnement du moteur et pourrait assurer le controle de l'avion pendant cette phase de croisiere. L'identification des parametres du moteur pourrait etre realisee aussi pour les autres phases de montee et de descente afin d'obtenir son modele complet pour toute l'enveloppe du vol de l'avion Cessna Citation X (montee, croisiere, descente). Cette methode employee dans ce travail pourrait aussi etre efficace pour realiser un modele pour l'identification des coefficients aerodynamiques du meme avion a partir toujours des essais en vol. None None None

Transport aérien longue distance des brûlés graves: revue de la littérature et application pratique

PubMed Central

Leclerc, T.; Hoffmann, C.; Forsans, E.; Cirodde, A.; Boutonnet, M.; Jault, P.; Tourtier, J.-P.; Bargues, L.; Donat, N.

2015-01-01

Summary Les brûlés graves nécessitent une prise en charge multidisciplinaire dans des centres hautement spécialisés. La rareté de ces centres impose souvent le transport aérien médicalisé longue distance. Cependant, il y a peu de données publiées sur ces transferts. Dans cette mise au point, pour optimiser la prise en charge des brûlés dès qu’un transport aérien est décidé ou même seulement envisagé, nous proposons d’extraire de cette littérature limitée des principes simples s’appuyant aussi sur l’expérience pratique du Service de Santé des Armées françaises. Nous décrivons d’abord comment les contraintes aéronautiques peuvent affecter le transport de brûlés graves à bord d’aéronefs. Nous abordons ensuite la régulation de ces missions, en analysant les risques associés au transport aérien des brûlés graves et leurs implications sur les indications, la chronologie et les modalités du transport. Enfin, nous développons la conduite de la mission, comprenant la préparation du matériel et des consommables avant le vol, l’évaluation et la mise en condition du patient avant l’embarquement, et la poursuite de la prise en charge en vol. PMID:26668564

Fabrication et caracterisation de nanocristaux de silicium localises, realises par gravure electrochimique pour des applications nanoelectroniques

NASA Astrophysics Data System (ADS)

Ayari-Kanoun, Asma

Ce travail de these porte sur le developpement d'une nouvelle approche pour la localisation et l'organisation de nanocristaux de silicium realises par gravure electrochimique. Cette derniere represente une technique simple et peu couteuse par rapport aux autres techniques couramment utilisees pour la fabrication de nanocristaux de silicium. L'idee de ce travail a ete d'etudier la nanostructuration de minces couches de nitrure de silicium, d'environ 30 nm d'epaisseur pour permettre par la suite un arrangement periodique des nanocristaux de silicium. Cette pre-structuration est obtenue de facon artificielle en imposant un motif periodique via une technique de lithographie par faisceau d'electrons combinee avec une gravure plasma. Une optimisation des conditions de lithographie et de gravure plasma ont permis d'obtenir des reseaux de trous de 30 nm de diametre debouchant sur le silicium avec un bon controle de leur morphologie (taille, profondeur et forme). En ajustant les conditions de gravure electrochimique (concentration d'acide, temps de gravure et densite de courant), nous avons obtenu des reseaux -2D ordonnes de nanocristaux de silicium de 10 nm de diametre a travers ces masques de nanotrous avec le controle parfait de leur localisation, la distance entre les nanocristaux et leur orientation cristalline. Des etudes electriques preliminaires sur ces nanocristaux ont permis de mettre en evidence des effets de chargement. Ces resultats tres prometteurs confirment l'interet des nanocristaux de silicium realises par gravure electrochimique dans le futur pour la fabrication a grande echelle de dispositifs nanoelectroniques. Mots-cles : localisation, organisation, nanocristaux de silicium, gravure electrochimique, lithographie electronique, gravure plasma, nitrure de silicium.

Optimisation of SOA-REAMs for hybrid DWDM-TDMA PON applications.

PubMed

Naughton, Alan; Antony, Cleitus; Ossieur, Peter; Porto, Stefano; Talli, Giuseppe; Townsend, Paul D

2011-12-12

We demonstrate how loss-optimised, gain-saturated SOA-REAM based reflective modulators can reduce the burst to burst power variations due to differential access loss in the upstream path in carrier distributed passive optical networks by 18 dB compared to fixed linear gain modulators. We also show that the loss optimised device has a high tolerance to input power variations and can operate in deep saturation with minimal patterning penalties. Finally, we demonstrate that an optimised device can operate across the C-Band and also over a transmission distance of 80 km. © 2011 Optical Society of America

Application of Three Existing Stope Boundary Optimisation Methods in an Operating Underground Mine

NASA Astrophysics Data System (ADS)

Erdogan, Gamze; Yavuz, Mahmut

2017-12-01

The underground mine planning and design optimisation process have received little attention because of complexity and variability of problems in underground mines. Although a number of optimisation studies and software tools are available and some of them, in special, have been implemented effectively to determine the ultimate-pit limits in an open pit mine, there is still a lack of studies for optimisation of ultimate stope boundaries in underground mines. The proposed approaches for this purpose aim at maximizing the economic profit by selecting the best possible layout under operational, technical and physical constraints. In this paper, the existing three heuristic techniques including Floating Stope Algorithm, Maximum Value Algorithm and Mineable Shape Optimiser (MSO) are examined for optimisation of stope layout in a case study. Each technique is assessed in terms of applicability, algorithm capabilities and limitations considering the underground mine planning challenges. Finally, the results are evaluated and compared.

Strategic optimisation of microgrid by evolving a unitised regenerative fuel cell system operational criterion

NASA Astrophysics Data System (ADS)

Bhansali, Gaurav; Singh, Bhanu Pratap; Kumar, Rajesh

2016-09-01

In this paper, the problem of microgrid optimisation with storage has been addressed in an unaccounted way rather than confining it to loss minimisation. Unitised regenerative fuel cell (URFC) systems have been studied and employed in microgrids to store energy and feed it back into the system when required. A value function-dependent on line losses, URFC system operational cost and stored energy at the end of the day are defined here. The function is highly complex, nonlinear and multi dimensional in nature. Therefore, heuristic optimisation techniques in combination with load flow analysis are used here to resolve the network and time domain complexity related with the problem. Particle swarm optimisation with the forward/backward sweep algorithm ensures optimal operation of microgrid thereby minimising the operational cost of the microgrid. Results are shown and are found to be consistently improving with evolution of the solution strategy.

Strategies facilitant les tests en pre-certification pour la robustesse a l'egard des radiations =

NASA Astrophysics Data System (ADS)

Souari, Anis

Les effets des radiations cosmiques sur l'electronique embarquee preoccupent depuis. quelques decennies les chercheurs interesses par la robustesse des circuits integres. Plusieurs. recherches ont ete menees dans cette direction, principalement pour les applications spatiales. ou l’environnement de leur deploiement est hostile. En effet, ces environnements sont denses. en termes de particules qui, lorsqu’elles interagissent avec les circuits integres, peuvent. mener a leur dysfonctionnement, voir meme a leur destruction. De plus, les effets des. radiations s’accentuent pour les nouvelles generations des circuits integres ou la diminution. de la taille des transistors et l’augmentation de la complexite de ces circuits augmentent la. probabilite d’apparition des anomalies et par consequence la croissance des besoins de test. L’expansion de l’electronique grand public (commercial off-the-shelf, COTS) et l’adoption. de ces composants pour des applications critiques comme les applications avioniques et. spatiales incitent egalement les chercheurs a doubler les efforts de verification de la fiabilite. de ces circuits. Les COTS, malgre leurs meilleures caracteristiques en comparaison avec les. circuits durcis tolerants aux radiations qui sont couteux et en retard en termes de technologie. utilisee, sont vulnerables aux radiations. Afin d’ameliorer la fiabilite de ces circuits, une evaluation de leur vulnerabilite dans les. differents niveaux d’abstraction du flot de conception est recommandee. Ceci aide les. concepteurs a prendre les mesures de mitigation necessaires sur le design au niveau. d’abstraction en question. Enfin, afin de satisfaire les exigences de tolerance aux pannes, des. tests tres couteux de certification, obtenus a l’aide de bombardement de particules (protons, neutrons, etc.), sont necessaires. Dans cette these, nous nous interessons principalement a definir une strategie de precertification. permettant d’evaluer d’une facon realiste la sensibilite des circuits integres face. aux effets des radiations afin d’eviter d’envoyer des circuits non robustes a la phase tres. couteuse de la certification. Les circuits cibles par nos travaux sont les circuits integres. programmables par l’usager (FPGA) a base de memoire SRAM et le type de pannes ciblees, causees par les radiations, est les SEU (single event upset) consistant a un basculement de. l’etat logique d’un element de memoire a son complementaire. En effet, les FPGA a base de. memoire SRAM sont de plus en plus demandes par la communaute de l’aerospatial grace a. leurs caracteristiques de prototypage rapide et de reconfiguration sur site mais ils sont. vulnerables face aux radiations ou les SEU sont les pannes les plus frequentes dans les. elements de memoire de type SRAM. Nous proposons une nouvelle approche d’injection de. pannes par emulation permettant de mimer les effets des radiations sur la memoire de. configuration des FPGA et de generer des resultats les plus fideles possibles des resultats des. tests de certification. Cette approche est basee sur la consideration de la difference de. sensibilite des elements de memoire de configuration lorsqu’ils sont a l’etat '1' et a l’etat '0', observee sous des tests acceleres sous faisceaux de protons au renomme laboratoire. TRIUMF, dans la procedure de generation des sequences de test dans le but de mimer la. distribution des pannes dans la memoire de configuration. Les resultats des experimentations. de validation montrent que la strategie proposee est efficace et genere des resultats realistes. Ces resultats revelent que ne pas considerer la difference de sensibilite peut mener a une. sous-estimation de la sensibilite des circuits face aux radiations. Dans la meme optique d’optimisation de la procedure d’injection des pannes par emulation, a. savoir le test de pre-certification, nous proposons une methodologie permettant de maximiser. la detection des bits critiques (bits provoquant une defaillance fonctionnelle s’ils changent. d’etat) pour un nombre bien determine de SEU (qui est le modele de pannes adopte) ou de. maximiser la precision de l’estimation de nombre des bits critiques. Pour ce faire, une. classification des bits de configuration en differents ensembles est tout d’abord mise en. oeuvre, selon leur contenu, les ressources qu’ils configurent et leur criticite. Ensuite, une. evaluation de la sensibilite de chaque ensemble est accomplie. Enfin, la priorisation. d’injection des pannes dans les ensembles les plus sensibles est recommandee. Plusieurs. scenarios d’optimisation d’injection des pannes sont proposes et les resultats sont compares. avec ceux donnes par la methode conventionnelle d’injection aleatoire des pannes. La. methodologie d’optimisation proposee assure une amelioration de plus de deux ordres de. grandeur. Une derniere approche facilitant l’evaluation de la sensibilite des bits configurant les LUT. (look up table) de FPGA, les plus petites entites configurables du FPGA permettant. d’implementer des fonctions combinatoires, utilises par un design est presentee. Elle permet. l’identification facile et sans cout en termes d’utilisation du materiel ou d’outils externes des. bits des LUT. L’approche proposee est simple et efficace, offrant une couverture de pannes. de 100 % et applicable aux nouvelles generations des FPGA de Xilinx. Les approches proposees contribuent a repondre aux exigences du cahier des charges de cette. these et a achever les objectifs definis. Le realisme et la maximisation de l’estimation de la. vulnerabilite des circuits sous test offerts par les nouvelles approches assurent le. developpement d’une strategie de test en pre-certification efficace. En effet, la premiere. approche d’injection de pannes considerant la difference de sensibilite relative des elements. de memoire selon leur contenu genere des resultats donnant une erreur relative atteignant. 3.1 % quand compares aux resultats obtenus a TRIUMF alors que l’erreur relative donnee. par la comparaison des resultats d’une injection conventionnelle aleatoire de pannes avec. ceux de TRIUMF peut atteindre la valeur de 75 %. De plus, l’application de cette approche a. des circuits plus conventionnels montre que 2.3 fois plus d’erreurs sont detectees en. comparaison avec l’injection aleatoire des pannes. Ceci suggere que ne pas considerer la. difference de sensibilite relative dans la procedure d’emulation peut mener a une sousestimation. de la sensibilite du design face aux radiations. Les resultats de la deuxieme. approche proposee ont ete aussi compares aux resultats d’une injection aleatoire de pannes. L’approche proposee, maximisant le nombre des bits critiques inverses, permet d’atteindre. un facteur d’acceleration de 108 de la procedure d’injection des pannes en comparaison a. l’approche aleatoire. Elle permet aussi de minimiser l’erreur d’estimation du nombre des bits. critiques pour atteindre une valeur de ±1.1 % calculee pour un intervalle de confiance de. 95 % tandis que la valeur d’erreur d’estimation des bits critiques generee par l’approche. aleatoire d’injection des pannes pour le meme intervalle de confiance peut atteindre ±8.6 %. Enfin, la derniere approche proposee d’injection de pannes dans les LUT se distingue des. autres approches disponibles dans la litterature par sa simplicite tout en assurant une. couverture maximale de pannes de 100 %. En effet, l’approche proposee est independante. des outils externes permettant d’identifier les bits configurant les LUT qui sont obsoletes ou. ne supportent pas les nouvelles generations des FPGA. Elle agit directement sur les fichiers. generes par l’outil de synthese adopte.

Summation-by-Parts operators with minimal dispersion error for coarse grid flow calculations

NASA Astrophysics Data System (ADS)

Linders, Viktor; Kupiainen, Marco; Nordström, Jan

2017-07-01

We present a procedure for constructing Summation-by-Parts operators with minimal dispersion error both near and far from numerical interfaces. Examples of such operators are constructed and compared with a higher order non-optimised Summation-by-Parts operator. Experiments show that the optimised operators are superior for wave propagation and turbulent flows involving large wavenumbers, long solution times and large ranges of resolution scales.

A new compound arithmetic crossover-based genetic algorithm for constrained optimisation in enterprise systems

NASA Astrophysics Data System (ADS)

Jin, Chenxia; Li, Fachao; Tsang, Eric C. C.; Bulysheva, Larissa; Kataev, Mikhail Yu

2017-01-01

In many real industrial applications, the integration of raw data with a methodology can support economically sound decision-making. Furthermore, most of these tasks involve complex optimisation problems. Seeking better solutions is critical. As an intelligent search optimisation algorithm, genetic algorithm (GA) is an important technique for complex system optimisation, but it has internal drawbacks such as low computation efficiency and prematurity. Improving the performance of GA is a vital topic in academic and applications research. In this paper, a new real-coded crossover operator, called compound arithmetic crossover operator (CAC), is proposed. CAC is used in conjunction with a uniform mutation operator to define a new genetic algorithm CAC10-GA. This GA is compared with an existing genetic algorithm (AC10-GA) that comprises an arithmetic crossover operator and a uniform mutation operator. To judge the performance of CAC10-GA, two kinds of analysis are performed. First the analysis of the convergence of CAC10-GA is performed by the Markov chain theory; second, a pair-wise comparison is carried out between CAC10-GA and AC10-GA through two test problems available in the global optimisation literature. The overall comparative study shows that the CAC performs quite well and the CAC10-GA defined outperforms the AC10-GA.

Optimisation of the supercritical extraction of toxic elements in fish oil.

PubMed

Hajeb, P; Jinap, S; Shakibazadeh, Sh; Afsah-Hejri, L; Mohebbi, G H; Zaidul, I S M

2014-01-01

This study aims to optimise the operating conditions for the supercritical fluid extraction (SFE) of toxic elements from fish oil. The SFE operating parameters of pressure, temperature, CO2 flow rate and extraction time were optimised using a central composite design (CCD) of response surface methodology (RSM). High coefficients of determination (R²) (0.897-0.988) for the predicted response surface models confirmed a satisfactory adjustment of the polynomial regression models with the operation conditions. The results showed that the linear and quadratic terms of pressure and temperature were the most significant (p < 0.05) variables affecting the overall responses. The optimum conditions for the simultaneous elimination of toxic elements comprised a pressure of 61 MPa, a temperature of 39.8ºC, a CO₂ flow rate of 3.7 ml min⁻¹ and an extraction time of 4 h. These optimised SFE conditions were able to produce fish oil with the contents of lead, cadmium, arsenic and mercury reduced by up to 98.3%, 96.1%, 94.9% and 93.7%, respectively. The fish oil extracted under the optimised SFE operating conditions was of good quality in terms of its fatty acid constituents.

Optimisation des trajectoires d'un systeme de gestion de vol d'avions pour la reduction des couts de vol

NASA Astrophysics Data System (ADS)

Sidibe, Souleymane

The implementation and monitoring of operational flight plans is a major occupation for a crew of commercial flights. The purpose of this operation is to set the vertical and lateral trajectories followed by airplane during phases of flight: climb, cruise, descent, etc. These trajectories are subjected to conflicting economical constraints: minimization of flight time and minimization of fuel consumed and environmental constraints. In its task of mission planning, the crew is assisted by the Flight Management System (FMS) which is used to construct the path to follow and to predict the behaviour of the aircraft along the flight plan. The FMS considered in our research, particularly includes an optimization model of flight only by calculating the optimal speed profile that minimizes the overall cost of flight synthesized by a criterion of cost index following a steady cruising altitude. However, the model based solely on optimization of the speed profile is not sufficient. It is necessary to expand the current optimization for simultaneous optimization of the speed and altitude in order to determine an optimum cruise altitude that minimizes the overall cost when the path is flown with the optimal speed profile. Then, a new program was developed. The latter is based on the method of dynamic programming invented by Bellman to solve problems of optimal paths. In addition, the improvement passes through research new patterns of trajectories integrating ascendant cruises and using the lateral plane with the effect of the weather: wind and temperature. Finally, for better optimization, the program takes into account constraint of flight domain of aircrafts which utilize the FMS.

Détection et prise en charge efficace à l’urgence d’une luxation de Lisfranc à faible vélocité

PubMed Central

Mayich, D. Joshua; Mayich, Michael S.; Daniels, Timothy R.

2012-01-01

Résumé Objectif Améliorer la capacité des médecins de soins primaires de reconnaître les mécanismes et les présentations courantes des luxations de Lisfranc à basse vélocité (LLF) et mieux faire comprendre le rôle de l’imagerie et les principes des soins primaires dans les cas de LLF à basse vélocité. Sources des données Une recension des ouvrages spécialisés dans MEDLINE a été effectuée et les résultats ont été résumés, concernant notamment l’anatomie et les mécanismes, les diagnostics cliniques et par imagerie et les principes de la prise en charge en milieu de soins primaires. Message principal Les LLF à basse vélocité sont le résultat de divers mécanismes et, à l’examen clinique et à l’imagerie, les signes révélateurs sont très peu perceptibles. Il faut donc un fort degré de suspicion et de prudence dans la prise en charge de ce type de blessure. Conclusion Si on met en pratique quelques principes thérapeutiques dans la prise en charge des LLF à basse vélocité, qui sont potentiellement dévastatrices si elles ne sont pas reconnues, et ce, dès leur présentation, il est possible d’optimiser l’issue de telles blessures.

Principes et réalisation d'une chaîne laser femtoseconde haute intensité basée sur le saphir dopé au titane

NASA Astrophysics Data System (ADS)

Le Blanc, Catherine

We present the initial study, the realisation and the characterisation of a high intensity femtosecond laser chain. This chain is able to produce intensities higher than 10^18 W/cm2 on target, at a 10 Hertz repetition rate. We present first fondamentals principles of chirped pulse propagation mechanisms: group velocity dispersion, self-phase modulation, self-focusing, and gain saturation. Then after describing the spectroscopic properties of titanium doped sapphire (Ti:S), we discuss near infrared femtosecond oscillators able to be amplified in Ti:S medium, and describe our home made Kerr Lens mode locked femtosecond Ti:S oscillator. The high intensity laser chain is based on the Chirped Pulse Amplification concept, which consists in stretching the pulse before its amplification in order to avoid non-linear effects such self-focusing or breakdown, and then recompressing it to its initial pulse duration. We have developed two compact and efficient multipass amplifiers for femtosecond chirped pulse amplification. With only two of these devices, we obtain an amplification factor of 10^8, which corresponds to a peak power of ˜ 0.5 terawatt after compression. We analyse in details the performances of this system and its advantages in terms of its high quantum yield (0.3), flexibility, and optical quality. Some observed spectral distortion on chirped pulses is simply explained by a gain saturation model. High dynamic pulse temporal control is crucial for interaction experiments. For this reason, we have developed a third order sampling autocorrelator. This device is able to measure 100 fs pulses with more than 8 orders of magnitude. I compare our obtained performances to other femtosecond systems and I analyse the best way to increase the energy, reduce the pulse duration and optimise focusing in order to reach the 10^19 W/cm2 regime. Ce mémoire présente les études préliminaires, la réalisation et la caractérisation d'une chaîne dite "de haute intensité" en régime femtosecondes. Cette installation est capable de produire sur cible des intensités supérieures à 10^18 W/cm2 à une récurrence de 10 tirs par seconde. Nous présentons tout d'abord les principes fondamentaux de la propagation d'impulsions étirées dans un milieu amplificateur en mettant en évidence les principaux mécanismes mis en jeu dans ce processus : la dispersion de vitesse de groupe, l'automodulation de phase, l'autofocalisation et la saturation du gain. Une analyse des différentes possibilités quant au choix de la source initiale capable d'émettre des impulsions de durée femtoseconde dans le domaine du proche infrarouge est réalisée après la présentation des caractéristiques spectroscopiques du saphir dopé au titane. Sont en particulier décrits en détail le principe et le fonctionnement de l'oscillateur au saphir dopé au titane à autoblocage de modes que nous avons construit à cet effet. L'amplification jusqu'aux puissances de l'ordre du terawatt repose sur le concept "CPA" d'amplification d'impulsions à dérive de fréquence. Nous explorons ici la voie des amplificateurs à multipassages suivant des configurations déjà développées pour les amplificateurs à colorants. Une attention particulière a été portée sur les méthodes de réglage, la fiabilité, la stabilité et la qualité du profil spatial du faisceau. D'autre part, une modélisation rend parfaitement compte des effets de saturation dans les amplificateurs. Les impulsions obtenues après compression ont une énergie de l'ordre de 60 mJ et une durée de l'ordre de 130 fs. La partie suivante est consacrée à une étude des problèmes d'étirement et de recompression pour tenter d'expliquer les raisons de cette recompression imparfaite. Finalement, un paramètre encore plus crucial pour la physique de l'interaction sur cible solide sans création d'un préplasma est le contraste des impulsions. Nous décrivons donc l'appareil de mesure capable d'effectuer des autocorrélations avec une dynamique dépassant 10^8 permettant d'observer un éventuel pied d'énergie à ce niveau. Les problèmes de propagation d'impulsions lumineuses ultra intenses sont ensuite abordés, pour optimiser la focalisation du faisceau jusqu'à des intensités de 10^18 W/cm2. Dans une discussion finale, les performances de cette installation sont comparées à celles des systèmes développés par ailleurs et nous réalisons une étude plus prospective des étapes à mettre en oeuvre afin d'augmenter l'énergie amplifiée, diminuer la durée des impulsions et optimiser la focalisation, le but à atteindre étant le régime des 10^19 W/cm2.

Caracterisation des melanges developpes pour le moulage basse pression des poudres metalliques (LPIM) =

NASA Astrophysics Data System (ADS)

Fareh, Fouad

Le moulage par injection basse pression des poudres metalliques est une technique de fabrication qui permet de fabriquer des pieces possedant la complexite des pieces coulees mais avec les proprietes mecaniques des pieces corroyees. Cependant, l'optimisation des etapes de deliantage et de frittage a ete jusqu'a maintenant effectuee a l'aide de melange pour lesquels la moulabilite optimale n'a pas encore ete demontree. Ainsi, la comprehension des proprietes rheologiques et de la segregation des melanges est tres limitee et cela presente le point faible du processus de LPIM. L'objectif de ce projet de recherche etait de caracteriser l'influence des liants sur le comportement rheologique des melanges en mesurant la viscosite et la segregation des melanges faible viscosite utilises dans le procede LPIM. Afin d'atteindre cet objectif, des essais rheologiques et thermogravimetriques ont ete conduits sur 12 melanges. Ces melanges ont ete prepares a base de poudre d'Inconel 718 de forme spherique (chargement solide constant a 60%) et de cires, d'agents surfactants ou epaississants. Les essais rheologiques ont ete utilises entre autre pour calculer l'indice d'injectabilite ?STV des melanges, tandis que les essais thermogravimetriques ont permis d'evaluer precisement la segregation des poudres dans les melanges. Il a ete demontre que les trois (3) melanges contenant de la cire de paraffine et de l'acide stearique presentent des indices alpha STV plus eleves qui sont avantageux pour le moulage par injection des poudres metalliques (MIM), mais segregent beaucoup trop pour que la piece fabriquee produise de bonnes caracteristiques mecaniques. A l'oppose, le melange contenant de la cire de paraffine et de l'ethylene-vinyle acetate ainsi que le melange contenant seulement de la cire de carnauba segregent peu voire pas du tout, mais possedent de tres faibles indices alphaSTV : ils sont donc difficilement injectables. Le meilleur compromis semble donc etre les melanges contenant de la cire (de paraffine, d'abeille et de carnauba) et de faible teneur en acide stearique et en ethylene-vinyle acetate. Par ailleurs, les lois physiques preexistantes ont permis de confirmer les resultats des essais rheologiques et thermogravimetriques, mais aussi de mettre en evidence l'influence de la segregation sur les proprietes rheologiques des melanges. Ces essais ont aussi montre l'effet de constituants de liant et du temps passe a l'etat fondu sur l'intensite de la segregation dans les melanges. Les melanges contenants de l'acide stearique segregent rapidement. La caracterisation des melanges developpes pour le moulage basse pression des poudres metalliques doit etre obtenue a l'aide d'une methode de courte duree pour eviter la segregation et de mesurer precisement l'aptitude a l'ecoulement de ces melanges.

Technology Insertion and Management: Options for the Canadian Forces

DTIC Science & Technology

2010-01-01

Minister of National Defence, 2010 © Sa Majesté la Reine ( en droit du Canada), telle que représentée par le ministre de la Défense nationale, 2010...semble indiquer qu’un changement de paradigme est en cours dans la façon dont les militaires élaborent et emploient la technologie à utiliser avec leurs...coûts-avantages fondée sur l’optimisation des options en matière d’insertion technologique. ii DRDC CORA TM 2010-015 This page

A new effective operator for the hybrid algorithm for solving global optimisation problems

NASA Astrophysics Data System (ADS)

Duc, Le Anh; Li, Kenli; Nguyen, Tien Trong; Yen, Vu Minh; Truong, Tung Khac

2018-04-01

Hybrid algorithms have been recently used to solve complex single-objective optimisation problems. The ultimate goal is to find an optimised global solution by using these algorithms. Based on the existing algorithms (HP_CRO, PSO, RCCRO), this study proposes a new hybrid algorithm called MPC (Mean-PSO-CRO), which utilises a new Mean-Search Operator. By employing this new operator, the proposed algorithm improves the search ability on areas of the solution space that the other operators of previous algorithms do not explore. Specifically, the Mean-Search Operator helps find the better solutions in comparison with other algorithms. Moreover, the authors have proposed two parameters for balancing local and global search and between various types of local search, as well. In addition, three versions of this operator, which use different constraints, are introduced. The experimental results on 23 benchmark functions, which are used in previous works, show that our framework can find better optimal or close-to-optimal solutions with faster convergence speed for most of the benchmark functions, especially the high-dimensional functions. Thus, the proposed algorithm is more effective in solving single-objective optimisation problems than the other existing algorithms.

Optimal design and operation of a photovoltaic-electrolyser system using particle swarm optimisation

NASA Astrophysics Data System (ADS)

Sayedin, Farid; Maroufmashat, Azadeh; Roshandel, Ramin; Khavas, Sourena Sattari

2016-07-01

In this study, hydrogen generation is maximised by optimising the size and the operating conditions of an electrolyser (EL) directly connected to a photovoltaic (PV) module at different irradiance. Due to the variations of maximum power points of the PV module during a year and the complexity of the system, a nonlinear approach is considered. A mathematical model has been developed to determine the performance of the PV/EL system. The optimisation methodology presented here is based on the particle swarm optimisation algorithm. By this method, for the given number of PV modules, the optimal sizeand operating condition of a PV/EL system areachieved. The approach can be applied for different sizes of PV systems, various ambient temperatures and different locations with various climaticconditions. The results show that for the given location and the PV system, the energy transfer efficiency of PV/EL system can reach up to 97.83%.

L’évaluation du risque cardiaque avant l’utilisation de stimulants chez les enfants et les adolescents

PubMed Central

Bélanger, SA; Warren, AE; Hamilton, RM; Gray, C; Gow, RM; Sanatani, S; Côté, J-M; Lougheed, J; LeBlanc, J; Martin, S; Miles, B; Mitchell, C; Gorman, DA; Weiss, M; Schachar, R

2009-01-01

Les décisions en matière de réglementation et les documents scientifiques au sujet de la prise en charge du trouble de déficit de l’attention avec hyperactivité (TDAH) soulèvent des questions quant à l’innocuité des médicaments et à l’évaluation convenable à effectuer avant le traitement afin de déterminer la pertinence d’une pharmacothérapie. Ce constat est particulièrement vrai en présence de cardiopathies structurelles ou fonctionnelles. Le présent article contient l’analyse des données disponibles, y compris les publications révisées par des pairs, des données tirées du site Web de la Food and Drug Administration des États-Unis au sujet des réactions indésirables déclarées chez des enfants qui prennent des stimulants, ainsi que des données de Santé Canada sur le même problème. Des lignes directrices consensuelles sur l’évaluation pertinente sont proposées d’après l’apport des membres de la Société canadienne de pédiatrie, de la Société canadienne de cardiologie et de l’Académie canadienne de psychiatrie de l’enfant et de l’adolescent, qui possèdent notamment des compétences et des connaissances précises tant dans le secteur du TDAH que de la cardiologie pédiatrique. Le présent document de principes prône une anamnèse et un examen physique détaillés avant la prescription de stimulants et s’attarde sur le dépistage des facteurs de risque de mort subite, mais il ne contient pas de recommandations systématiques de dépistage électrocardiographique ou de consultations avec un spécialiste en cardiologie, à moins que les antécédents ou que l’examen physique ne le justifient. Le document contient un questionnaire pour repérer les enfants potentiellement vulnérables à une mort subite (quel que soit le type de TDAH ou les médicaments utilisés pour le traiter). Même si les recommandations dépendent des meilleures données probantes disponibles, le comité s’entend pour affirmer que d’autres recherches s’imposent pour optimiser l’approche de ce scénario clinique courant.

Modélisation de matériaux chiraux à structures hétérogènes (modèle MTWC) : théorie, validations expérimentales et applications

NASA Astrophysics Data System (ADS)

Mariotte, F.; Sauviac, B.; Héliot, J. Ph.

1995-10-01

After a brief overview of the concept of electromagnetic chirality, this paper deals with a numerical simulation of isotropic composites with metallic chiral inclusions: computations of permittivity, permeability and chirality parameter as functions of frequency are presented. The theoretical results are, step by step, compared with measurements of chiral composites at microwave frequencies. The application of such media in Radar Cross-Section (RCS) management and control is discussed. The introduction of chiral inclusions seems to make impedance matching possible and may lead to attractive shields with lower reflectivity and larger bandwidth. However the optimization of material characteristics necessary to get a specific absorber remains a difficult task. Après un bref rappel du principe de la chiralité, cet article présente une modélisation des propriétés effectives des matériaux hétérogènes à inclusions chirales métalliques : calcul de la permittivité, perméabilité et coefficient de chiralité du composite en fonction de la fréquence. Les résultats théoriques sont validés, pas à pas, par des mesures effectuées sur des composites chiraux de natures différentes. L'application de tels matériaux à la conception de matériaux absorbant les ondes électromagnétiques est ensuite envisagée. Les inclusions chirales semblent offrir la possibilité de régler l'impédance à l'interface air-milieu absorbant permettant ainsi de concevoir des absorbants micro-ondes plus performants en terme d'atténuation ou de largeur de bande. L'optimisation des caractéristiques des matériaux pour obtenir des performances données restent néanmoins très délicate.

Non-linearite et couplages lumiere-matiere en electrodynamique quantique en circuit

NASA Astrophysics Data System (ADS)

Bourassa, Jerome

L'électrodynamique quantique en circuit est un contexte unique pour l'optique quantique et le calcul quantique. Dans cette architecture où des qubits supraconducteurs, composés de jonctions Josephson, sont fortement couplés au champ électromagnétique de résonateurs coplanaires, la dynamique du système est semblable à celle des atomes dans des cavités optiques. La polyvalence de la conception des circuits supraconducteurs permet d'étudier l'interaction lumière-matière de différents régimes et manières. Ainsi, plusieurs qubits peuvent être couplés à un seul résonateur afin de les enchevêtrer. Une jonction Josephson peut également être intégrée directement au résonateur afin de produire une interaction non linéaire entre les photons. De la même manière, il a été suggéré que le couplage qubitrésonateur pourrait devenir l'échelle d'énergie dominante du système : le régime de couplage ultrafort. Malgré que la dynamique qubit-résonateur soit bien comprise, les modèles actuels ne permettent pas de prédire correctement les effets dispersifs du résonateur sur les qubits tels : le décalage de Lamb, l'interaction d'échange virtuelle et le temps de relaxation. Comme il n'y a pas non plus de modèle général permettant de déterminer les caractéristiques d'un résonateur non linéaire, on comprend mal comment rendre la non-linéarité plus forte, ni même si le régime de couplage ultrafort peut être physiquement réalisé dans ces circuits. Dans le cadre de ma thèse, je me suis intéressé à la modélisation de qubits et de résonateurs afin de mieux comprendre l'interaction lumière-matière en circuits, dans le but de développer des conceptions alternatives d'architectures plus performantes ou qui explorent des régimes d'interactions méconnus. Pour ce faire, j'ai développé une méthode analytique générale permettant de trouver l'hamiltonien exact de circuits distribués non linéaires, une méthode basée sur la mécanique lagrangienne et la représentation des modes propres d'oscillation. La grande qualité de la méthode réside dans la description analytique détaillée des paramètres de l'hamiltonien du système en fonction de la géométrie et des caractéristiques électromagnétiques du circuit. Non seulement le formalisme développé réconcilie le modèle quantique avec l'électromagnétisme classique et la théorie des circuits, mais va bien au-delà en formulant d'importantes prédictions sur la nature des interactions et l'influence des fluctuations du vide du résonateur sur la dynamique des qubits supraconducteurs. À l'aide d'exemples numériques réalistes et compatibles avec les technologies actuelles, je montre comment de simples optimisations de conception permettraient d'augmenter grandement l'efficacité et la rapidité d'exécution de calculs quantiques avec l'architecture, en plus d'atteindre des régimes de non-linéarité et de couplage lumière-matière inédits. En permettant de mieux comprendre l'interaction lumière-matière dans les circuits et d'optimiser l'architecture afin d'atteindre de nouveaux régimes de couplages, la méthode d'analyse de circuit développée dans cette thèse permettra de tester et raffiner nos connaissances sur l'électrodynamique quantique et la physique quantique. Mots-clés: Information quantique, électrodynamique quantique, supraconductivité, électromagnétisme, qubit supraconducteur, résonateur non linéaire, couplage ultrafort, effet Kerr.

Patient-tailored Drug-eluting Stent Choice - A Solution for Patients with Diabetes: Proceedings of Two Satellite Symposia Held at EuroPCR in May 2015 in Paris.

PubMed

Mountfort, Katrina; Mehran, Roxana; Colombo, Antonio; Stella, Pieter; Romaguera, Rafael; Sardella, Gennaro

2015-09-01

Although second-generation drug-eluting stents (DES) have improved outcomes in percutaneous coronary interventions (PCIs), important unmet needs remain. Two symposia at EuroPCR 2015 focused on two challenging scenarios. First, patients with diabetes mellitus (DM) have generally inferior outcomes following PCI. The Cre8™ stent (manufactured by CID Spa, member of Alvimedica Group) has shown unique efficacy in subpopulations of patients with DM during clinical trials. A live case in a patient with diabetes illustrated the challenges of complex multivessel disease. Second, optimising stent selection towards devices that have demonstrated complete and early endothelialisation offers the potential to reduce the duration of dual antiplatelet therapy. The Cre8™ DES features a polymer-free platform and has been associated with low rates of in-stent thrombosis.

Algorithmes de couplage RANS et ecoulement potentiel

NASA Astrophysics Data System (ADS)

Gallay, Sylvain

Dans le processus de developpement d'avion, la solution retenue doit satisfaire de nombreux criteres dans de nombreux domaines, comme par exemple le domaine de la structure, de l'aerodynamique, de la stabilite et controle, de la performance ou encore de la securite, tout en respectant des echeanciers precis et minimisant les couts. Les geometries candidates sont nombreuses dans les premieres etapes de definition du produit et de design preliminaire, et des environnements d'optimisations multidisciplinaires sont developpes par les differentes industries aeronautiques. Differentes methodes impliquant differents niveaux de modelisations sont necessaires pour les differentes phases de developpement du projet. Lors des phases de definition et de design preliminaires, des methodes rapides sont necessaires afin d'etudier les candidats efficacement. Le developpement de methodes ameliorant la precision des methodes existantes tout en gardant un cout de calcul faible permet d'obtenir un niveau de fidelite plus eleve dans les premieres phases de developpement du projet et ainsi grandement diminuer les risques associes. Dans le domaine de l'aerodynamisme, les developpements des algorithmes de couplage visqueux/non visqueux permettent d'ameliorer les methodes de calcul lineaires non visqueuses en methodes non lineaires prenant en compte les effets visqueux. Ces methodes permettent ainsi de caracteriser l'ecoulement visqueux sur les configurations et predire entre autre les mecanismes de decrochage ou encore la position des ondes de chocs sur les surfaces portantes. Cette these se focalise sur le couplage entre une methode d'ecoulement potentiel tridimensionnelle et des donnees de section bidimensionnelles visqueuses. Les methodes existantes sont implementees et leurs limites identifiees. Une methode originale est ensuite developpee et validee. Les resultats sur une aile elliptique demontrent la capacite de l'algorithme a de grands angles d'attaques et dans la region post-decrochage. L'algorithme de couplage a ete compare a des donnees de plus haute fidelite sur des configurations issues de la litterature. Un modele de fuselage base sur des relations empiriques et des simulations RANS a ete teste et valide. Les coefficients de portance, de trainee et de moment de tangage ainsi que les coefficients de pression extraits le long de l'envergure ont montre un bon accord avec les donnees de soufflerie et les modeles RANS pour des configurations transsoniques. Une configuration a geometrie hypersustentatoire a permis d'etudier la modelisation des surfaces hypersustentees de la methode d'ecoulement potentiel, demontrant que la cambrure peut etre prise en compte uniquement dans les donnees visqueuses.

Sleep/Wakefulness Management in Continuous/Sustained Operations

DTIC Science & Technology

2002-11-01

SEINE CEDEX, FRANCE RTO LECTURE SERIES 223 Sleep/Wakefulness Management in Continuous/Sustained Operations (La gestion des rythmes veille/sommeil lors... Management in Continuous/Sustained Operations (La gestion des rythmes veille/sommeil lors des opérations continues/soutenues) The material in this...St. Joseph Print Group Inc. (A St. Joseph Corporation Company) 1165 Kenaston Street, Ottawa, Ontario, Canada K1G 6S1 ii Sleep/Wakefulness Management in

Intensité thérapeutique optimale : comment mesurer l'intensité d'une association radiothérapie-chimiothérapie ?

NASA Astrophysics Data System (ADS)

Ganem, G.; Dubray, B.

1998-04-01

Treatment intensification is needed to overcome the disappointing efficacy of anticancer treatments used as a single modality. The conception, comparison and optimization of radiotherapy - chemotherapy combinations is hampered by the lack of a common tool enabling the clinicians to quantify the effects of the association of different treatment modalities. Such a difficulty is mainly due to chemotherapy (large array of drugs, pharmacological uncertainties), but is also the consequence of end-point multiplicity (tumour control, normal tissue injury) and tumour biology complexity. L'intensification thérapeutique est une nécessité face à l'efficacité insuffisante des traitements anticancéreux utilisés séparément. La conception, la comparaison, et l'optimisation des modalités possibles d'association de radiothérapie et de chimiothérapie est considérablement gênée par l'absence d'un outil permettant de mesurer l'efficacitéé résultante de la combinaison d'agents thérapeutiques différents. Cette difficulté provient essentiellement de l'usage de la chimiothérapie (nombreuses drogues, pharmacocinétique mal connue), mais aussi de la multiplicité des critères de jugement (action anti-tumorale, lésions des tissus sains) et de la complexité de la biologie tumorale.

Identification de lois constitutives et de lois de frottement adaptées aux grandes vitesses de sollicitation

NASA Astrophysics Data System (ADS)

Dalverny, O.; Capéraa, S.; Pantalé, O.; Sattouf, C.

2002-12-01

Cet article présente une méthodologie d'identification de lois constitutives et de lois de contact adaptées aux matériaux métalliques sous chargement dynamique à grande vitesse de déformation. Les essais sont effectués à partir de montages expérimentaux adaptés à un lanceur à gaz permettant d'obtenir une vitesse de projectile de l'ordre de 350m/s pour une masse totale de 30gr. Le premier essai consiste en un impact de Taylor correspondant à un chargement mécanique de type compression. Le second essai de type “extrusion conique" permet la détermination des lois de frottement à grande vitesse. La procédure générale d'identification des lois de comportement à partir d'essais dynamiques se fait au moyen d'une analyse post-mortem des échantillons et de la corrélation entre ces résultats expérimentaux et un modèle numérique des essais. Pour les deux cas précédemment cités, nous présentons la configuration optimale d'essai ainsi que les résultats obtenus à partir d'un algorithme d'optimisation de type Levenberg-Marquard.

Conception de lois de pilotage robustes et sequencement de gains par l'approche de systemes lineaires a parametres variants

NASA Astrophysics Data System (ADS)

Hentabli, Kamel

Cette recherche s'inscrit dans le cadre du projet de recherche Active Control Technology entre l'Ecole de Technologie Superieure et le constructeur Bombardier Aeronautique . Le but est de concevoir des strategies de commandes multivariables et robustes pour des modeles dynamiques d'avions. Ces strategies de commandes devraient assurer a l'avion une haute performance et satisfaire des qualites de vol desirees en l'occurrence, une bonne manoeuvrabilite, de bonnes marges de stabilite et un amortissement des mouvements phugoides et rapides de l'avion. Dans un premier temps, nous nous sommes principalement interesses aux methodes de synthese LTI et plus exactement a l'approche Hinfinity et la mu-synthese. Par la suite, nous avons accorde un interet particulier aux techniques de commande LPV. Pour mener a bien ce travail, nous avons envisage une approche frequentielle, typiquement Hinfinity. Cette approche est particulierement interessante, dans la mesure ou le modele de synthese est construit directement a partir des differentes specifications du cahier des charges. En effet, ces specifications sont traduites sous forme de gabarits frequentiels, correspondant a des ponderations en entree et en sortie que l'on retrouve dans la synthese Hinfinity classique. Par ailleurs, nous avons utilise une representation de type lineaire fractionnelle (LFT), jugee mieux adaptee pour la prise en compte des differents types d'incertitudes, qui peuvent intervenir sur le systeme. De plus, cette representation s'avere tres appropriee pour l'analyse de la robustesse via les outils de la mu-analyse. D'autre part, afin d'optimiser le compromis entre les specifications de robustesse et de performance, nous avons opte pour une structure de commande a 2 degres de liberte avec modele de reference. Enfin, ces techniques sont illustrees sur des applications realistes, demontrant ainsi la pertinence et l'applicabilite de chacune d'elle. Mots cles. Commande de vol, qualites de vol et manoeuvrabilite, commande robuste, approche Hinfinity , mu-synthese, systemes lineaires a parametres variants, sequencement de gains, transformation lineaire fractionnelle, inegalite matricielle lineaire.

Evaluation des prescriptions antibiotiques au service des urgences de l’Hôpital Militaire d’Instruction Mohammed V (HMIMV)

PubMed Central

Elbouti, Anass; Rafai, Mostafa; Chouaib, Naoufal; Jidane, Said; Belkouch, Ahmed; Bakkali, Hicham; Belyamani, Lahcen

2016-01-01

Cette étude à pour objectifs de décrire les pratiques des prescriptions, évaluer leur pertinence et leur conformité aux règles d’utilisations et étudier les facteurs susceptibles de les influencer. Il s’agit d’une étude transversale d’évaluation des prescriptions antibiotiques portant sur 105 patients réalisée au service des urgences médico-chirurgicales de l’H.M.I.Med V de Rabat sur une période d’un mois. Le recueil des données était fait à l’aide d’un questionnaire rapportant les données démographiques et anamnestiques, les antécédents, la notion d’allergie, les données spécifiques de l’examen clinique, les données para cliniques, la prescription détaillée de l’antibiotique. Les données récoltées ont été ensuite évaluées par un médecin référent, chargé d’indiquer les éventuelles erreurs de traitement. Parmi les infections ayant motivé la prescription des antibiotiques, les affections des systèmes respiratoires et urinaires étaient au premier rang, les familles d’antibiotiques les plus couramment employées sont les pénicillines, les quinolones et les céphalosporines. 74 prescriptions soit (70,5%) étaient à la fois pertinentes et conformes contre 9 prescriptions soit (8,6%) justifiées mais non pertinentes et 6 prescriptions soit (5,7%) étaient jugées injustifiées par le médecin référent par absence d’infection. Les évaluations des pratiques médicales sont rarement menées dans les établissements de santé; c’est dans ce cadre que nous avons voulu nous inscrire en produisant cette étude afin d’améliorer la pertinence de nos prescriptions antibiotiques et d’optimiser leur conformité aux différentes recommandations. PMID:28292124

Optimising operational amplifiers by evolutionary algorithms and gm/Id method

NASA Astrophysics Data System (ADS)

Tlelo-Cuautle, E.; Sanabria-Borbon, A. C.

2016-10-01

The evolutionary algorithm called non-dominated sorting genetic algorithm (NSGA-II) is applied herein in the optimisation of operational transconductance amplifiers. NSGA-II is accelerated by applying the gm/Id method to estimate reduced search spaces associated to widths (W) and lengths (L) of the metal-oxide-semiconductor field-effect-transistor (MOSFETs), and to guarantee their appropriate bias levels conditions. In addition, we introduce an integer encoding for the W/L sizes of the MOSFETs to avoid a post-processing step for rounding-off their values to be multiples of the integrated circuit fabrication technology. Finally, from the feasible solutions generated by NSGA-II, we introduce a second optimisation stage to guarantee that the final feasible W/L sizes solutions support process, voltage and temperature (PVT) variations. The optimisation results lead us to conclude that the gm/Id method and integer encoding are quite useful to accelerate the convergence of the evolutionary algorithm NSGA-II, while the second optimisation stage guarantees robustness of the feasible solutions to PVT variations.

A Bayesian Approach for Sensor Optimisation in Impact Identification

PubMed Central

Mallardo, Vincenzo; Sharif Khodaei, Zahra; Aliabadi, Ferri M. H.

2016-01-01

This paper presents a Bayesian approach for optimizing the position of sensors aimed at impact identification in composite structures under operational conditions. The uncertainty in the sensor data has been represented by statistical distributions of the recorded signals. An optimisation strategy based on the genetic algorithm is proposed to find the best sensor combination aimed at locating impacts on composite structures. A Bayesian-based objective function is adopted in the optimisation procedure as an indicator of the performance of meta-models developed for different sensor combinations to locate various impact events. To represent a real structure under operational load and to increase the reliability of the Structural Health Monitoring (SHM) system, the probability of malfunctioning sensors is included in the optimisation. The reliability and the robustness of the procedure is tested with experimental and numerical examples. Finally, the proposed optimisation algorithm is applied to a composite stiffened panel for both the uniform and non-uniform probability of impact occurrence. PMID:28774064

Elaboration de nouvelles approches micromecaniques pour l'optimisation des performances mecaniques des materiaux heterogenes

NASA Astrophysics Data System (ADS)

Aboutajeddine, Ahmed

Les modeles micromecaniques de transition d'echelles qui permettent de determiner les proprietes effectives des materiaux heterogenes a partir de la microstructure sont consideres dans ce travail. L'objectif est la prise en compte de la presence d'une interphase entre la matrice et le renforcement dans les modeles micromecaniques classiques, de meme que la reconsideration des approximations de base de ces modeles, afin de traiter les materiaux multiphasiques. Un nouveau modele micromecanique est alors propose pour tenir compte de la presence d'une interphase elastique mince lors de la determination des proprietes effectives. Ce modele a ete construit grace a l'apport de l'equation integrale, des operateurs interfaciaux de Hill et de la methode de Mori-Tanaka. Les expressions obtenues pour les modules globaux et les champs dans l'enrobage sont de nature analytique. L'approximation de base de ce modele est amelioree par la suite dans un nouveau modele qui s'interesse aux inclusions enrobees avec un enrobage mince ou epais. La resolution utilisee s'appuie sur une double homogeneisation realisee au niveau de l'inclusion enrobee et du materiau. Cette nouvelle demarche, permettra d'apprehender completement les implications des approximations de la modelisation. Les resultats obtenus sont exploites par la suite dans la solution de l'assemblage de Hashin. Ainsi, plusieurs modeles micromecaniques classiques d'origines differentes se voient unifier et rattacher, dans ce travail, a la representation geometrique de Hashin. En plus de pouvoir apprecier completement la pertinence de l'approximation de chaque modele dans cette vision unique, l'extension correcte de ces modeles aux materiaux multiphasiques est rendue possible. Plusieurs modeles analytiques et explicites sont alors proposee suivant des solutions de differents ordres de l'assemblage de Hashin. L'un des modeles explicite apparait comme une correction directe du modele de Mori-Tanaka, dans les cas ou celui ci echoue a donner de bons resultats. Finalement, ce modele de Mori-Tanaka corrige est utilise avec les operateurs de Hill pour construire un modele de transition d'echelle pour les materiaux ayant une interphase elastoplastique. La loi de comportement effective trouvee est de nature incrementale et elle est conjuguee a la relation de la plasticite de l'interphase. Des simulations d'essais mecaniques pour plusieurs proprietes de l'interphase plastique a permis de dresser des profils de l'enrobage octroyant un meilleur comportement au materiau.

Une alternative au cobalt pour la synthese de nanotubes de carbone monoparoi par plasma inductif thermique

NASA Astrophysics Data System (ADS)

Carrier, Jean-Francois

Les nanotubes de carbone de type monoparoi (C-SWNT) sont une classe recente de nanomateriaux qui ont fait leur apparition en 1991. L'interet qu'on leur accorde provient des nombreuses proprietes d'avant-plan qu'ils possedent. Leur resistance mecanique serait des plus rigide, tout comme ils peuvent conduire l'electricite et la chaleur d'une maniere inegalee. Non moins, les C-SWNT promettent de devenir une nouvelle classe de plateforme moleculaire, en servant de site d'attache pour des groupements reactifs. Les promesses de ce type particulier de nanomateriau sont nombreuses, la question aujourd'hui est de comment les realiser. La technologie de synthese par plasma inductif thermique se situe avantageusement pour la qualite de ses produits, sa productivite et les faibles couts d'operation. Par contre, des recherches recentes ont permis de mettre en lumiere des risques d'expositions reliees a l'utilisation du cobalt, comme catalyseur de synthese; son elimination ou bien son remplacement est devenu une preoccupation importante. Quatre recettes alternatives ont ete mises a l'essai afin de trouver une alternative plus securitaire a la recette de base; un melange catalytique ternaire, compose de nickel, de cobalt et d'oxyde d'yttrium. La premiere consiste essentiellement a remplacer la proportion massique de cobalt par du nickel, qui etait deja present dans la recette de base. Les trois options suivantes contiennent de nouveaux catalyseurs, en remplacement au Co, qui sont apparus dans plusieurs recherches scientifiques au courant des dernieres annees: le dioxyde de zircone (ZrO2), dioxyde de manganese (MnO2) et le molybdene (Mo). La methode utilisee consiste a vaporiser la matiere premiere, sous forme solide, dans un reacteur plasma a haute frequence (3 MHz) a paroi refroidi. Apres le passage dans le plasma, le systeme traverse une section dite de "croissance", isolee thermiquement a l'aide de graphite, afin de maintenir une certaine plage de temperature favorable a la synthese de C-SWNT. Le produit final est par la suite recolte sur des filtres metalliques poreux, une fois le systeme mis a l'arret. Dans un premier temps, une analyse thermodynamique, calculee avec le logiciel Fact-Sage, a permis de mettre en lumiere l'etat des differentes produits et reactifs, tout au long de leur passage dans le systeme. Elle a permis de reveler la similitude de composition de la phase liquide du melange catalytique ternaire de base, avec celui du melange binaire, avec nickel et oxyde d'yttrium. Par la suite, une analyse du bilan d'energie, a l'aide d'un systeme d'acquisition de donnees, a permis de determiner que les conditions operatoires des cinq echantillons mis a l'essai etaient similaires. Au total, le produit final a ete caracterise a l'aide de six methodes de caracterisations differentes : l'analyse thermogravimetrique, la diffraction de rayons X, la microscopie electronique a balayage a haute resolution (HRSEM), la microscopie electronique a transmission (MET), la spectroscopie RAMAN, ainsi que la mesure de la surface specifique (BET). Les resultats de ces analyses ont permis de constater, de facon coherente, que le melange a base de molybdene etait celui qui produisait la moins bonne qualite de produit. Ensuite, en ordre croissant, s'en suivait du melange a base de MnO2 et de ZrO2. Le melange de reference, a base de cobalt, est au deuxieme rang en matiere de qualite. La palme revient au melange binaire, dont la proportion est double en nickel. Les resultats de ce travail de recherche permettent d'affirmer qu'il existe une alternative performante au cobalt pour effectuer la synthese de nanotubes de carbone monoparoi, par plasma inductif thermique. Cette alternative est l'utilisation d'un melange catalytique binaire a base de nickel et d'oxyde d'yttrium. Il est suggere que les performances plus faibles des recettes alternatives, moins performantes, pourraient etre expliquees par le profil thermique fixe du reacteur. Ceci pourrait favoriser certains melanges, au detriment des autres, qui possedent des proprietes thermodynamiques differentes. Le montage, l'equipement, ainsi que les parametres d'operations, pourraient etre modifies en fonction de ces catalyseurs afin d'optimiser la synthese. Mots cles : nanotubes de carbone mono paroi, plasma inductif thermique, cobalt, nickel, dioxyde de zirconium, dioxyde de manganese, molybdene, trioxyde d'yttrium et noir de carbone

Algorithmes et architectures pour ordinateurs quantiques supraconducteurs

NASA Astrophysics Data System (ADS)

Blais, Alexandre

Depuis sa formulation, la theorie de l'information a ete basee, implicitement, sur les lois de la physique classique. Une telle formulation est toutefois incomplete puisqu'elle ne tient pas compte de la realite quantique. Au cours des vingt dernieres annees, l'expansion de la theorie de l'information englobant les effets purement quantiques a connu un interet grandissant. La realisation d'un systeme de traitement de l'information quantique, un ordinateur quantique, presente toutefois de nombreux defis. Dans ce document, on s'interesse a differents aspects concernant ces defis. On commence par presenter des concepts algorithmiques comme l'optimisation de calculs quantiques et le calcul quantique geometrique. Par la suite, on s'interesse au design et a differents aspects de l'utilisation de qubits bases sur les jonctions Josephson. En particulier, un nouveau design de qubit supraconducteur est suggere. On presente aussi une approche originale pour l'interaction entre qubits. Cette approche est tres generale puisqu'elle peut etre appliquee a differents designs de qubits. Finalement, on s'interesse a la lecture des qubits supraconducteurs de flux. Le detecteur suggere ici a l'avantage de pouvoir etre decouple du qubit lorsqu'il n'y a pas de mesure en cours.

Les psychoses de l’épileptique: approche clinique à propos d'un cas

PubMed Central

Charfi, Nada; Trigui, Dorsaf; Ben Thabet, Jihène; Zouari, Nasreddine; Zouari, Lobna; Maalej, Mohamed

2014-01-01

Pour discuter les liens entre épilepsie et psychose, les auteurs rapportent l'observation d'une fille âgée de 22 ans, traitée pour épilepsie fronto-temporale, adressée en psychiatrie pour des hallucinations sensorielles et cénesthésiques et un délire mystique et d'influence, apparus secondairement et non améliorés par le traitement antiépileptique. Les symptômes psychotiques, chez l’épileptique, peuvent entrer dans le cadre de psychoses intercritiques, post-critiques ou alternatives. Pour le cas rapporté, les symptômes psychotiques étaient intercritiques et chroniques. Il s'agissait vraisemblablement d'une psychose schizophréniforme. Dans ce type de psychose, une indifférence affective et une restriction des activités sont rarement rencontrés, alors que les fluctuations rapides de l'humeur sont fréquentes. Les thématiques délirantes sont assez souvent mystiques, alimentées par des hallucinations auditives et par des hallucinations visuelles inhabituelles. Les troubles négatifs sont rares. Les psychoses épileptiques n'ont pas été identifiées comme des entités nosographiques dans les systèmes de classification psychiatrique (DSM-IV et CIM-10), ce qui pose un problème de reconnaissance de ces troubles. Une collaboration entre psychiatre et neurologue devient ainsi nécessaire pour mieux comprendre cette comorbidité complexe, éviter les erreurs diagnostiques et optimiser la prise en charge. PMID:25309665

Multi-objective optimisation of aircraft flight trajectories in the ATM and avionics context

NASA Astrophysics Data System (ADS)

Gardi, Alessandro; Sabatini, Roberto; Ramasamy, Subramanian

2016-05-01

The continuous increase of air transport demand worldwide and the push for a more economically viable and environmentally sustainable aviation are driving significant evolutions of aircraft, airspace and airport systems design and operations. Although extensive research has been performed on the optimisation of aircraft trajectories and very efficient algorithms were widely adopted for the optimisation of vertical flight profiles, it is only in the last few years that higher levels of automation were proposed for integrated flight planning and re-routing functionalities of innovative Communication Navigation and Surveillance/Air Traffic Management (CNS/ATM) and Avionics (CNS+A) systems. In this context, the implementation of additional environmental targets and of multiple operational constraints introduces the need to efficiently deal with multiple objectives as part of the trajectory optimisation algorithm. This article provides a comprehensive review of Multi-Objective Trajectory Optimisation (MOTO) techniques for transport aircraft flight operations, with a special focus on the recent advances introduced in the CNS+A research context. In the first section, a brief introduction is given, together with an overview of the main international research initiatives where this topic has been studied, and the problem statement is provided. The second section introduces the mathematical formulation and the third section reviews the numerical solution techniques, including discretisation and optimisation methods for the specific problem formulated. The fourth section summarises the strategies to articulate the preferences and to select optimal trajectories when multiple conflicting objectives are introduced. The fifth section introduces a number of models defining the optimality criteria and constraints typically adopted in MOTO studies, including fuel consumption, air pollutant and noise emissions, operational costs, condensation trails, airspace and airport operations. A brief overview of atmospheric and weather modelling is also included. Key equations describing the optimality criteria are presented, with a focus on the latest advancements in the respective application areas. In the sixth section, a number of MOTO implementations in the CNS+A systems context are mentioned with relevant simulation case studies addressing different operational tasks. The final section draws some conclusions and outlines guidelines for future research on MOTO and associated CNS+A system implementations.

Measuring Effects and Success in Influence Operations: Challenges, Limitations and Opportunitites

DTIC Science & Technology

2011-04-01

domaines de la psychologie , de l’anthropologie et de la sociologie, ainsi que sur des entrevues menées auprès de pionniers des technologies de...documents issus des domaines de la psychologie , de l’anthropologie et de la sociologie, ainsi que sur des entrevues menées auprès de pionniers des...la psychologie , de l’anthropologie et de la sociologie, ainsi que sur des entrevues menées auprès de pionniers des technologies de l’intelligence

Interagency Training for Comprehensive Operations: Government Partners Perceptions of Exercise Maple Guardian (La Formation Interorganismes aux fins d’Operations Globales: Perceptions des Partenaires Gouvernementaux de l’Exercise Maple Guardian)

DTIC Science & Technology

2010-06-01

autres ministères de même que sur la culture afghane, et faire intervenir les autres ministères plus tôt durant la planification de l’exercice...mécanismes de planification des FC. Ils jugent que la formation les a aidés à établir des relations utiles avec des membres des FC (et d’autres effectifs...ministères et sur la culture afghane, et de faire intervenir d’autres ministères plus tôt durant la planification de l’exercice. Les résultats de

Elaboration de revetements nanocomposites avec des proprietes superhydrophobes, semi-conductrices et photocatalytiques

NASA Astrophysics Data System (ADS)

Madidi, Fatima Zahra

Les lignes aeriennes de transport et de distribution de l'energie electrique sont souvent exposees a diverses contraintes. Parmi celles-ci, la pollution des isolateurs constitue l'un des facteurs de premiere importance dans la fiabilite du transport d'energie. En effet, la presence de pollution sur les isolateurs lorsqu'elle est humidifiee entraine la diminution de leur performance electrique en favorisant l'apparition d'arcs de contournement. De telles pannes peuvent parfois causer des impacts socioeconomiques importants. Par ailleurs, le developpement de nouveaux revetements pour ces isolateurs peut s'averer un moyen efficace pour les proteger contre l'apparition de l'arc de contournement. Les revetements superhydrophobes ont fait l'objet de nombreuses etudes au cours de ces dernieres annees. Ces surfaces sont preparees en combinant une rugosite nano-microstructuree avec une faible energie de surface. En outre, de telles surfaces ont de nombreuses applications si elles sont durables et n'ont pas d'effets nocifs sur l'environnement. L'objectif principal de la presente etude vise d'abord l'elaboration de revetements superhydrophobes, puis l'etude de leur duree de vie, leurs proprietes dielectriques et photocatalytiques. Une grande variete de materiaux a faible energie de surface peuvent etre utilises pour le developpement de ces revetements. Dans cette recherche, le caoutchouc de silicone (CS) est employe car il presente de nombreuses proprietes, notamment une forte hydrophobie, une resistance aux rayonnements ultraviolets, et une bonne tenue au feu sans degagement de produits toxiques. Toutefois, le point faible de ces materiaux est la degradation de leurs proprietes hydrophobes. Afin d'ameliorer certaines proprietes du caoutchouc de silicone, des nanoparticules seront additionnees au polymere de base. La technique d'elaboration des revetements consiste a ajouter des nanoparticules de dioxyde de titane (TiO2) au polymere de base, par des methodes ayant un potentiel d'applications industrielles. Les parametres d'elaboration ont ete optimises afin d'obtenir des revetements stables presentant des angles de contact eleves avec des gouttelettes d'eau et de faibles hysteresis. Apres avoir obtenu des surfaces superhydrophobes, des tests de stabilite ont ete effectues dans des conditions de vieillissement accelere tels que l'immersion dans des solutions aqueuses avec differents pH et conductivites ou la degradation par rayonnement UV. Les resultats obtenus ont montre que l'ajout de nanoparticules de dioxyde de titane au caoutchouc de silicone permet d'ameliorer l'hydrophobie et la stabilite de ce polymere. Les revetements superhydrophobes obtenus ont pu maintenir leur superhydrophobicite apres plusieurs jours d'immersion dans differentes solutions aqueuses. Ils presentent aussi une bonne stabilite lorsqu'ils sont exposes aux rayons UV ainsi qu'une stabilite mecanique. De plus, on a pu developper des revetements nanocomposites et microcomposites avec de bonnes proprietes dielectriques. L'etude des proprietes photocatalytiques des revetements superhydrophobes ont montre que l'adsorption des molecules reactives (polluants) sur la surface du catalyseur (TiO2) est le parametre cle de l'activite photocatalytique. L'augmentation de la concentration de TiO2 conduit a une diminution de la concentration du polluant et par consequent a un excellent rendement photocatalytique.

Détermination de la vitesse de coupe en usinage à l'aide des réseaux de neurones

NASA Astrophysics Data System (ADS)

Amor, Noureddine; Noureddine, Ali; Kherfane, Riad Lakhdar

2018-02-01

En usinage par enlèvement de copeaux, il est nécessaire de connaître des éléments tels que la géométrie à obtenir, la matière à usiner, le type d'opération, la machine-outil, l'outil de coupe, la profondeur de passe, l'avance, la vitesse de coupe. Ces trois derniers éléments quantifiables sont déterminés à l'aide de tables, abaques, logiciel informatique dédié, ou système CFAO, offrant une large gamme de choix mais manquant de transparence et de flexibilité. La contribution de cet article est d'appliquer les techniques d'intelligence artificielle basées sur les réseaux de neurones artificiels (RNA) au développement d'un système de décision pour le choix des paramètres de coupe. Pour modéliser la vitesse de coupe, nous utilisons un RNA avec un algorithme de rétro-propagation. Des valeurs expérimentales provenant d'un abaque source serviront à construire et établir le RNA pour estimer la valeur de la vitesse de coupe, utilisant comme données un certain nombre de paramètres d'influence. La validité des résultats obtenus montre que cette méthode peut être appliquée avec succès et que son utilisation dans le domaine de l'usinage peut contribuer à optimiser les conditions de coupe par un choix plus précis et plus rapide de la vitesse de coupe.

Optimizing Operational Physical Fitness (Optimisation de L’Aptitude Physique Operationnelle)

DTIC Science & Technology

2009-01-01

NORTH ATLANTIC TREATY ORGANISATION RESEARCH AND TECHNOLOGY ORGANISATION AC/323(HFM-080)TP/200 www.rto.nato.int RTO TECHNICAL REPORT TR... RESEARCH AND TECHNOLOGY ORGANISATION AC/323(HFM-080)TP/200 www.rto.nato.int RTO TECHNICAL REPORT TR-HFM-080 Optimizing Operational Physical...Fitness (Optimisation de l’aptitude physique opérationnelle) Final Report of Task Group 019. ii RTO-TR-HFM-080 The Research and

Optimising design, operation and energy consumption of biological aerated filters (BAF) for nitrogen removal of municipal wastewater.

PubMed

Rother, E; Cornel, P

2004-01-01

The Biofiltration process in wastewater treatment combines filtration and biological processes in one reactor. In Europe it is meanwhile an accepted technology in advanced wastewater treatment, whenever space is scarce and a virtually suspended solids-free effluent is demanded. Although more than 500 plants are in operation world-wide there is still a lack of published operational experiences to help planners and operators to identify potentials for optimisation, e.g. energy consumption or the vulnerability against peakloads. Examples from pilot trials are given how the nitrification and denitrification can be optimised. Nitrification can be quickly increased by adjusting DO content of the water. Furthermore carrier materials like zeolites can store surplus ammonia during peak loads and release afterwards. Pre-denitrification in biofilters is normally limited by the amount of easily degradable organic substrate, resulting in relatively high requirements for external carbon. The combination of pre-DN, N and post-DN filters is much more advisable for most municipal wastewaters, because the recycle rate can be reduced and external carbon can be saved. Exemplarily it is shown for a full scale preanoxic-DN/N/postanoxic-DN plant of 130,000 p.e. how 15% energy could be saved by optimising internal recycling and some control strategies.

A Literature Review on Operator Interface Technologies for Network Enabled Operational Environments Using Complex System Analysis

DTIC Science & Technology

2009-05-30

d’interface fondées sur le comportement et sur la psychologie , ainsi que des méthodes de conception et de mise en œuvre d’interfaces multi-agents. On a mis...réseaucentriques. Ces technologies comprennent des approches de conception d’interface fondées sur le comportement et sur la psychologie , ainsi que des

Endommagement d'un composite polypropylène renforcé par des fibres de verre courtes : approche expérimentale

NASA Astrophysics Data System (ADS)

Laksimi, Abdelouahed; Bounouas, Lahsen; Benmedakhene, Salim; Azari, Zitoun; Imad, Abdellatif

To obtain good mechanical performance of the composite material, it is important to optimise the fibres ratio as well as the fibre/matrix interface quality which have influence on the damage. The main objective of this study is to determine the structural parameters influence on damage evolution concerning two types of polypropylene glass fibres composites. With a classical approach of damage mechanical theory which consists of load-unload tensile tests, acoustic emission permits to detect and follow damage mechanisms during loading. Fractographic analysis highlights the different assumptions and conclusions for this study.

Pre-operative optimisation of lung function

PubMed Central

Azhar, Naheed

2015-01-01

The anaesthetic management of patients with pre-existing pulmonary disease is a challenging task. It is associated with increased morbidity in the form of post-operative pulmonary complications. Pre-operative optimisation of lung function helps in reducing these complications. Patients are advised to stop smoking for a period of 4–6 weeks. This reduces airway reactivity, improves mucociliary function and decreases carboxy-haemoglobin. The widely used incentive spirometry may be useful only when combined with other respiratory muscle exercises. Volume-based inspiratory devices have the best results. Pharmacotherapy of asthma and chronic obstructive pulmonary disease must be optimised before considering the patient for elective surgery. Beta 2 agonists, inhaled corticosteroids and systemic corticosteroids, are the main drugs used for this and several drugs play an adjunctive role in medical therapy. A graded approach has been suggested to manage these patients for elective surgery with an aim to achieve optimal pulmonary function. PMID:26556913

Developpement et validation d'un outil base sur l'acoustique geometrique pour le diagnostic du bruit de nacelle

NASA Astrophysics Data System (ADS)

Minard, Benoit

De nos jours, la problématique du bruit généré par les avions est devenue un point de développement important dans le domaine de l'aéronautique. C'est ainsi que de nombreuses études sont faites dans le domaine et une première approche consiste à modéliser de façon numérique ce bruit de manière à réduire de façon conséquente les coûts lors de la conception. C'est dans ce contexte qu'un motoriste a demandé à l'université de Sherbrooke, et plus particulièrement au groupe d'acoustique de l'Université de Sherbrooke (GAUS), de développer un outil de calcul de la propagation des ondes acoustiques dans les nacelles mais aussi pour l'étude des effets d'installation. Cet outil de prédiction leur permet de réaliser des études afin d'optimiser les traitements acoustiques (« liners »), la géométrie de ces nacelles pour des études portant sur l'intérieur de la nacelle et des études de positionnement des moteurs et de design pour les effets d'installation. L'objectif de ce projet de maîtrise était donc de poursuivre le travail réalisé par [gousset, 2011] sur l'utilisation d'une méthode de lancer de rayons pour l'étude des effets d'installation des moteurs d'avion. L'amélioration du code, sa rapidité, sa fiabilité et sa généralité étaient les objectifs principaux. Le code peut être utilisé avec des traitements acoustiques de surfaces («liners») et peut prendre en compte le phénomène de la diffraction par les arêtes et enfin peut être utilisé pour réaliser des études dans des environnements complexes tels que les nacelles d'avion. Le code développé fonctionne en 3D et procéde en 3 étapes : (1) Calcul des faisceaux initiaux (division d'une sphère, demi-sphère, maillage des surfaces de la géométrie) (2) Propagation des faisceaux dans l'environnement d'étude : calcul de toutes les caractéristiques des rayons convergents (amplitude, phase, nombre de réflexions, ...) (3) Reconstruction du champ de pression en un ou plusieurs points de l'espace à partir de rayons convergents (sommation des contributions de chaque rayon) : sommation cohérente. Le code (GA3DP) permet de prendre en compte les traitements de surface des parois, la directivité de la source, l'atténuation atmosphérique et la diffraction d'ordre 1. Le code a été validé en utilisant différentes méthodes telles que la méthode des sources-images, la méthode d'analyse modale ou encore la méthode des éléments finis de frontière. Un module Matlab a été créé spécialement pour l'étude des effets d'installation et intégré au code existant chez Pratt & Whitney Canada. Mots-clés : Acoustique géométrique - Ray-Tracing - Lancer de faisceaux - Diffraction - Sommation Cohérente - Niveau de Pression.

Optimised collision avoidance for an ultra-close rendezvous with a failed satellite based on the Gauss pseudospectral method

NASA Astrophysics Data System (ADS)

Chu, Xiaoyu; Zhang, Jingrui; Lu, Shan; Zhang, Yao; Sun, Yue

2016-11-01

This paper presents a trajectory planning algorithm to optimise the collision avoidance of a chasing spacecraft operating in an ultra-close proximity to a failed satellite. The complex configuration and the tumbling motion of the failed satellite are considered. The two-spacecraft rendezvous dynamics are formulated based on the target body frame, and the collision avoidance constraints are detailed, particularly concerning the uncertainties. An optimisation solution of the approaching problem is generated using the Gauss pseudospectral method. A closed-loop control is used to track the optimised trajectory. Numerical results are provided to demonstrate the effectiveness of the proposed algorithms.

Multi-objective optimisation of wastewater treatment plant control to reduce greenhouse gas emissions.

PubMed

Sweetapple, Christine; Fu, Guangtao; Butler, David

2014-05-15

This study investigates the potential of control strategy optimisation for the reduction of operational greenhouse gas emissions from wastewater treatment in a cost-effective manner, and demonstrates that significant improvements can be realised. A multi-objective evolutionary algorithm, NSGA-II, is used to derive sets of Pareto optimal operational and control parameter values for an activated sludge wastewater treatment plant, with objectives including minimisation of greenhouse gas emissions, operational costs and effluent pollutant concentrations, subject to legislative compliance. Different problem formulations are explored, to identify the most effective approach to emissions reduction, and the sets of optimal solutions enable identification of trade-offs between conflicting objectives. It is found that multi-objective optimisation can facilitate a significant reduction in greenhouse gas emissions without the need for plant redesign or modification of the control strategy layout, but there are trade-offs to consider: most importantly, if operational costs are not to be increased, reduction of greenhouse gas emissions is likely to incur an increase in effluent ammonia and total nitrogen concentrations. Design of control strategies for a high effluent quality and low costs alone is likely to result in an inadvertent increase in greenhouse gas emissions, so it is of key importance that effects on emissions are considered in control strategy development and optimisation. Copyright © 2014 Elsevier Ltd. All rights reserved.

Mise en oeuvre et caracterisation de pieces autotrempantes elaborees avec de nouveaux alliages meres

NASA Astrophysics Data System (ADS)

Bouchemit, Arslane Abdelkader

: L'autotrempabilite des aciers en metallurgie des poudres (MP) permet d'obtenir des pieces ayant une microstructure de trempe (martensite et/ou bainite), et ce, directement lors du refroidissement a la sortie du four de frittage (frittage industriel : 10 45 °C/min [550 a 350 °C]). Cela permet entre autres d'eliminer les traitements thermiques d'austenisation et de trempe (a l'eau : ≈ 2700 °C/min ou a l'huile : ≈ 1100 °C/min [550 a 350 °C] [17]) generalement requis apres le frittage afin d'obtenir une microstructure martensitique. Ainsi, le procede de fabrication est simplifie, moins couteux et la distorsion des pieces due au refroidissement rapide lors de la trempe est evitee. De plus, l'utilisation des bains d'huile est eliminee ce qui rend le procede plus securitaire et ecologique. Les principaux parametres commandant l'autotrempabilite sont : le taux de refroidissement et la composition chimique de l'acier. De nos jours, les systemes de refroidissement a convection forcee combines aux fours industriels permettent d'obtenir des taux de refroidissement eleves a la sortie des fours (60 300 °C/min [550 a 350 °C]) [18, 19]. De plus, le taux de refroidissement critique induisant la formation de la structure de trempe est largement influence par la composition chimique de l'acier. Ainsi, plus l'acier est allie (jusqu'a une certaine limite), plus ce taux de refroidissement critique est moindre. Le molybdene, le nickel et le cuivre sont les elements usuellement utilises en MP. Cependant, le manganese et le chrome sont moins couteux et ont un impact plus marque sur l'autotrempabilite, malgre cela, ils sont rarement utilises a cause de leur susceptibilite a l'oxydation et la degradation de la compressibilite causee par le manganese. L'objectif principal de ce projet est de developper des melanges autotrempants en ajoutant des alliages meres (MA : MA1, MA2 et MA4) fortement allies au manganese (5 15 %m) et au chrome (5 15 %m) qui contiennent beaucoup de carbone (≈ 4 %m) developpes par Ian Bailon-Poujol lors de sa maitrise [20]. La haute teneur en carbone de ces alliages meres assure la protection des elements d'alliage susceptibles a l'oxydation durant toutes les etapes du procede : dans le bain liquide lors de la fusion et l'atomisation a l'eau, pendant le broyage ainsi que lors du frittage des pieces contenant ces alliages meres. Precedemment, Ian Bailon-Poujol avait etudie le broyage de certains alliages meres atomises a l'eau et avait amorce le developpement de melanges autotrempants ainsi que des etudes de diffusion des elements d'alliage. Pour ce projet, le developpement des melanges autotrempants a implique l'optimisation de toutes les etapes de la mise en oeuvre afin d'obtenir les meilleures proprietes possibles des melanges avant frittage (ecoulement, resistance a cru...) et apres frittage (durete, microstructure...), et ce, pour des alliages meres atomises a l'eau par Ian Bailon-Poujol ainsi qu'un alliage mere de chimie similaire qui fut atomise au gaz. (Abstract shortened by ProQuest.).

Déterminants de l'utilisation des méthodes contraceptives dans la zone de santé Mumbunda à Lubumbashi, République Démocratique du Congo

PubMed Central

Matungulu, Charles Matungulu; Kandolo, Simon Ilunga; Mukengeshayi, Abel Ntambue; Nkola, Angèle Musau; Mpoyi, Dorcas Ilunga; Mumba, Sylvie Katanga; Kabamba, Julie Ndayi; Cowgill, Karen; Kaj, Françoise Malonga

2015-01-01

Introduction Augmenter la prévalence contraceptive s'incarne dans les objectifs des tous les acteurs des programmes qui visent de réduire la mortalité maternelle et infantile, d'améliorer la santé reproductive des adolescents, de lutter contre le VIH/SIDA et les infections sexuellement transmissible (IST), de promouvoir le bien-être familial et de ralentir la croissance démographique. L'objectif de cette étude était de déterminer la prévalence contraceptive moderne et identifier les facteurs qui sont liés à l'utilisation des méthodes contraceptives dans la zone de santé de Mumbunda. Méthodes Une étude transversale à visé analytique a été effectuée auprès des femmes âgées de 15 à 49 ans en union maritale, de Mai à Juin 2014. Grâce à un questionnaire pré testé et validé, nous avons récolté les données par interview sur les caractéristiques sociodémographiques, obstétricales ainsi que sur la pratique contraceptive. Le logiciel SPSS version 21 nous a permis d'analyser les données. Résultats Au total 500 femmes ont été incluses dans cette étude dont l’âge moyen était de 27,9±6,1 ans. La prévalence contraceptive moderne était de 27,6%. L'attitude (ORa= 4,79; IC95%: 1,59-14,43; p<0,001), le niveau de connaissance des méthodes contraceptives (ORa=1,87; IC95%: 1,22-2,87; p<0,001), le soutien du conjoint (ORa=1,87; IC95%: 1,22-2,87; p<0,001) étaient significativement associés à l'utilisation des méthodes contraceptives modernes. Conclusion Tout effort d'augmentation de la prévalence contraceptive devrait cibler l'attitude, le niveau de connaissance de méthodes et le soutien du conjoint afin d'optimiser l'utilisation de la contraception moderne dans la zone de santé (ZS) Mumbunda. PMID:26977237

Clouds at CTIO and the Dark Energy Survey

DOE Office of Scientific and Technical Information (OSTI.GOV)

Neilsen, Jr., Eric

An understanding of the weather patters at Cerro-Tololo Inter-American (CTIO) Observatory, the observing site for the Dark Energy Survey (DES), is important for assessing the efciency of DES operations in using observing time and for planning future operations. CTIO has maintained records of cloud-cover by quarters of nights since 1975. A comparison between these cloud records in the 2013-2014 DES observing season (DES year 1) and achieved observing efciency and exposure quality allows the DES collaboration to make better use of the historical records in survey planning. Plots and tables here relate human recorded cloud-cover to collection of good DESmore » data, show the variation of typical cloud-cover by month, and evaluate the relationship between the El Niño weather pattern and cloud-cover at CTIO.« less

La fragilité

PubMed Central

Lee, Linda; Heckman, George; Molnar, Frank J.

2015-01-01

Résumé Objectif Aider les médecins de famille à mieux reconnaître la fragilité et ses répercussions sur la prise en charge des patients âgés. Sources des données Une recension a été effectuée dans PubMed-MEDLINE de 1990 à 2013 pour trouver des articles rédigés en anglais exclusivement, à l’aide des groupes suivants de mots clés et d’en-têtes MeSH : frail elderly, frail, frailty; aged, geriatrics, geriatric assessment, health services for the aged; primary health care, community health services et family practice. Message principal La fragilité est fréquente, en particulier chez les personnes âgées atteintes de maladies chroniques complexes comme l’insuffisance cardiaque et la bronchopneumopathie chronique obstructive. De nouvelles données probantes démontrent l’importance de la fragilité comme facteur de prédiction d’issues indésirables chez les personnes plus âgées. Quoiqu’on ne s’entende actuellement pas sur les meilleures façons d’évaluer et de diagnostiquer la fragilité en soins primaires, des marqueurs individuels de la fragilité comme la lenteur de la démarche offrent des moyens pratiques prometteurs de dépister la fragilité. La détection de la fragilité en soins primaires peut offrir la possibilité de retarder la progression de la fragilité au moyen d’interventions proactives comme l’exercice. La reconnaissance de l’existence de la fragilité peut orienter un counseling approprié et la prise de mesures préventives anticipatoires pour les patients lorsqu’on envisage des interventions médicales. Elle peut aussi aider à cerner des problèmes concomitants qui contribuent à la fragilité et l’influencent et à en optimiser la prise en charge. Les recherches futures devraient se pencher sur la détermination de moyens pratiques et efficaces pour évaluer et prendre en charge de manière appropriée ces patients vulnérables au niveau des soins primaires. Conclusion En dépit de son importance, on a accordé peu d’attention au concept de la fragilité en médecine familiale. La fragilité peut aisément passer inaperçue parce que ses manifestations sont souvent subtiles, de progression lente et, par conséquent, elle peut être méprise pour un vieillissement normal. La formation des médecins a insisté sur des maladies médicales spécifiques plutôt que sur la vulnérabilité globale. Pour les médecins en soins primaires, la reconnaissance de la fragilité peut les aider à offrir un counseling approprié aux patients et aux membres de leur famille au sujet des risques des interventions médicales.

Energy efficiency in membrane bioreactors.

PubMed

Barillon, B; Martin Ruel, S; Langlais, C; Lazarova, V

2013-01-01

Energy consumption remains the key factor for the optimisation of the performance of membrane bioreactors (MBRs). This paper presents the results of the detailed energy audits of six full-scale MBRs operated by Suez Environnement in France, Spain and the USA based on on-site energy measurement and analysis of plant operation parameters and treatment performance. Specific energy consumption is compared for two different MBR configurations (flat sheet and hollow fibre membranes) and for plants with different design, loads and operation parameters. The aim of this project was to understand how the energy is consumed in MBR facilities and under which operating conditions, in order to finally provide guidelines and recommended practices for optimisation of MBR operation and design to reduce energy consumption and environmental impacts.

Cost optimisation and minimisation of the environmental impact through life cycle analysis of the waste water treatment plant of Bree (Belgium).

PubMed

De Gussem, K; Wambecq, T; Roels, J; Fenu, A; De Gueldre, G; Van De Steene, B

2011-01-01

An ASM2da model of the full-scale waste water plant of Bree (Belgium) has been made. It showed very good correlation with reference operational data. This basic model has been extended to include an accurate calculation of environmental footprint and operational costs (energy consumption, dosing of chemicals and sludge treatment). Two optimisation strategies were compared: lowest cost meeting the effluent consent versus lowest environmental footprint. Six optimisation scenarios have been studied, namely (i) implementation of an online control system based on ammonium and nitrate sensors, (ii) implementation of a control on MLSS concentration, (iii) evaluation of internal recirculation flow, (iv) oxygen set point, (v) installation of mixing in the aeration tank, and (vi) evaluation of nitrate setpoint for post denitrification. Both an environmental impact or Life Cycle Assessment (LCA) based approach for optimisation are able to significantly lower the cost and environmental footprint. However, the LCA approach has some advantages over cost minimisation of an existing full-scale plant. LCA tends to chose control settings that are more logic: it results in a safer operation of the plant with less risks regarding the consents. It results in a better effluent at a slightly increased cost.

Amélioration des performances du procédé de soudage TIG sur un acier au carbone et un alliage d'aluminium par dépôt de silice

NASA Astrophysics Data System (ADS)

Sire, Stéphane; Marya, Surendar

This Note presents ways to improve the weld penetration potential of TIG process by optimising silica application around the joints in a plain carbon steel and an aluminium alloy 5086. Whereas for plain carbon steels, full coverage of joint improves penetration, the presence of a blank zone around the joint in the flux coating on aluminium 5086 using AC-TIG seems to be the best solution for cosmetic and deep welds. To cite this article: S. Sire, S. Marya, C. R. Mecanique 330 (2002) 83-89.

Optimisation de fonctionnements de pompe à chaleur chimique : synchronisation et commande du procédé

NASA Astrophysics Data System (ADS)

Cassou, T.; Amouroux, M.; Labat, P.

1995-04-01

We present the mathematical modelling of a chemical heat pump and the associated simulator. This simulator is able to determine the influence of different parameters (which would be associated to the heat exchanges or to the chemical kinetics), but also to simulate the main operating modes. An optimal management of process represents the objective to reach; we materialize it by a continuous and steady production of the power delivered by the machine. Nous présentons le modèle mathématique d'un pilote de pompe à chaleur chimique et le simulateur numérique correspondant. Ce simulateur est capable de déterminer l'influence de divers paramètres (qu'ils soient liés aux échanges de chaleur ou à la cinétique chimique), mais aussi de simuler les principaux modes de fonctionnement. Une gestion optimale du procédé représente le but à atteindre: une conduite optimisée du système permet, par une gestion des différentes phases, une production continue et stable de la puissance délivrée par la machine.

Optimising Microbial Growth with a Bench-Top Bioreactor

ERIC Educational Resources Information Center

Baker, A. M. R.; Borin, S. L.; Chooi, K. P.; Huang, S. S.; Newgas, A. J. S.; Sodagar, D.; Ziegler, C. A.; Chan, G. H. T.; Walsh, K. A. P.

2006-01-01

The effects of impeller size, agitation and aeration on the rate of yeast growth were investigated using bench-top bioreactors. This exercise, carried out over a six-month period, served as an effective demonstration of the importance of different operating parameters on cell growth and provided a means of determining the optimisation conditions…

Turnaround Time Modeling for Conceptual Rocket Engines

NASA Technical Reports Server (NTRS)

Nix, Michael; Staton, Eric J.

2004-01-01

Recent years have brought about a paradigm shift within NASA and the Space Launch Community regarding the performance of conceptual design. Reliability, maintainability, supportability, and operability are no longer effects of design; they have moved to the forefront and are affecting design. A primary focus of this shift has been a planned decrease in vehicle turnaround time. Potentials for instituting this decrease include attacking the issues of removing, refurbishing, and replacing the engines after each flight. less, it is important to understand the operational affects of an engine on turnaround time, ground support personnel and equipment. One tool for visualizing this relationship involves the creation of a Discrete Event Simulation (DES). A DES model can be used to run a series of trade studies to determine if the engine is meeting its requirements, and, if not, what can be altered to bring it into compliance. Using DES, it is possible to look at the ways in which labor requirements, parallel maintenance versus serial maintenance, and maintenance scheduling affect the overall turnaround time. A detailed DES model of the Space Shuttle Main Engines (SSME) has been developed. Trades may be performed using the SSME Processing Model to see where maintenance bottlenecks occur, what the benefits (if any) are of increasing the numbers of personnel, or the number and location of facilities, in addition to trades previously mentioned, all with the goal of optimizing the operational turnaround time and minimizing operational cost. The SSME Processing Model was developed in such a way that it can easily be used as a foundation for developing DES models of other operational or developmental reusable engines. Performing a DES on a developmental engine during the conceptual phase makes it easier to affect the design and make changes to bring about a decrease in turnaround time and costs.

An intelligent factory-wide optimal operation system for continuous production process

NASA Astrophysics Data System (ADS)

Ding, Jinliang; Chai, Tianyou; Wang, Hongfeng; Wang, Junwei; Zheng, Xiuping

2016-03-01

In this study, a novel intelligent factory-wide operation system for a continuous production process is designed to optimise the entire production process, which consists of multiple units; furthermore, this system is developed using process operational data to avoid the complexity of mathematical modelling of the continuous production process. The data-driven approach aims to specify the structure of the optimal operation system; in particular, the operational data of the process are used to formulate each part of the system. In this context, the domain knowledge of process engineers is utilised, and a closed-loop dynamic optimisation strategy, which combines feedback, performance prediction, feed-forward, and dynamic tuning schemes into a framework, is employed. The effectiveness of the proposed system has been verified using industrial experimental results.

75 FR 63714 - Drawbridge Operation Regulation; Des Allemands Bayou, LA

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-18

... deviation from the regulation governing the operation of the Burlington Northern Santa Fe Railway swing...-671-2128, e-mail [email protected] . If you have questions on viewing the docket, call Renee V... Burlington Northern Santa Fe Railway swing span drawbridge across Bayou Des Allemands, mile 14.0 has a...

Discrete event simulation for healthcare organizations: a tool for decision making.

PubMed

Hamrock, Eric; Paige, Kerrie; Parks, Jennifer; Scheulen, James; Levin, Scott

2013-01-01

Healthcare organizations face challenges in efficiently accommodating increased patient demand with limited resources and capacity. The modern reimbursement environment prioritizes the maximization of operational efficiency and the reduction of unnecessary costs (i.e., waste) while maintaining or improving quality. As healthcare organizations adapt, significant pressures are placed on leaders to make difficult operational and budgetary decisions. In lieu of hard data, decision makers often base these decisions on subjective information. Discrete event simulation (DES), a computerized method of imitating the operation of a real-world system (e.g., healthcare delivery facility) over time, can provide decision makers with an evidence-based tool to develop and objectively vet operational solutions prior to implementation. DES in healthcare commonly focuses on (1) improving patient flow, (2) managing bed capacity, (3) scheduling staff, (4) managing patient admission and scheduling procedures, and (5) using ancillary resources (e.g., labs, pharmacies). This article describes applicable scenarios, outlines DES concepts, and describes the steps required for development. An original DES model developed to examine crowding and patient flow for staffing decision making at an urban academic emergency department serves as a practical example.

The Dark Energy Survey and Operations: Years 1 to 3

DOE Office of Scientific and Technical Information (OSTI.GOV)

Diehl, H. T.

2016-01-01

The Dark Energy Survey (DES) is an operating optical survey aimed at understanding the accelerating expansion of the universe using four complementary methods: weak gravitational lensing, galaxy cluster counts, baryon acoustic oscillations, and Type Ia supernovae. To perform the 5000 sq-degree wide field and 30 sq-degree supernova surveys, the DES Collaboration built the Dark Energy Camera (DECam), a 3 square-degree, 570-Megapixel CCD camera that was installed at the prime focus of the Blanco 4-meter telescope at the Cerro Tololo Inter-American Observatory (CTIO). DES has completed its third observing season out of a nominal five. This paper describes DES “Year 1”more » (Y1) to “Year 3” (Y3), the strategy, an outline of the survey operations procedures, the efficiency of operations and the causes of lost observing time. It provides details about the quality of the first three season's data, and describes how we are adjusting the survey strategy in the face of the El Niño Southern Oscillation« less

Etude critique de la prise en charge de 159 personnes âgées en consultation de psychiatrie

PubMed Central

Ben Thabet, Jihène; Ammar, Yousra; Charfi, Nada; Zouari, Lobna; Zouari, Nasreddine; Gaha, Lotfi; Maalej, Mohamed

2014-01-01

Introduction Le phénomène de vieillissement des populations est associé à une augmentation de la prévalence de la morbidité liée à l’âge. La prescription des psychotropes chez le sujet âgé est de plus en plus fréquente dans les institutions, les doses sont de plus en plus élevées, avec un recours fréquent à une poly pharmacothérapie. Nous nous sommes proposé de décrire les conduites thérapeutiques chez le sujet âgé consultant en psychiatrie, en vue de les confronter aux dernières recommandations en la matière. Méthodes L’étude était de type rétrospectif et descriptif. Elle a concerné les sujets âgés d'au moins 60 ans ayant consulté pour la première fois en psychiatrie, au CHU Hédi Chaker à Sfax, en 2010 ou 2011. Résultats Nous avons colligé 159 dossiers. L’âge moyen était de 73 ans. La démence et les troubles de l'humeur étaient les diagnostics les plus fréquents. Sur le plan thérapeutique, une poly thérapie faite d'au moins deux psychotropes de familles différentes a été prescrite pour 55,9%. Chez 60.3% des sujets, le traitement a été prescrit d'emblée à dose complète. Aucun dossier ne faisait état d'une prise en charge psychothérapeutique. Conclusion La prise en charge des malades de notre étude n’était pas conforme aux recommandations, notamment en matière d'association médicamenteuse, de progression des doses et d'association de la psychothérapie à la pharmacothérapie. L'information des médecins et leur sensibilisation aux particularités du sujet âgé contribuerait à optimiser les soins qui leur sont prodigués, y compris en psychiatrie. PMID:25120873

Shaba II: The French and Belgian Intervention in Zaire in 1978

DTIC Science & Technology

1993-04-01

Minerais (GECOMIN). Since GECOMIN could not operate without Belgian and European technicians, the Congolese signed an agreement that offered the Belgians 6...became the G6nerale Congolaise des Minerais (GECOMIN), then rechartered 104 with a new agreement with the Belgians as Ge4nrale des Carrieres et des

Hospital and operator variations in drug-eluting stent use: a multi-level analysis of 5967 consecutive patients in Scotland.

PubMed

Austin, David; Oldroyd, Keith G; McConnachie, Alex; Slack, Rachel; Eteiba, Hany; Flapan, Andrew D; Jennings, Kevin P; Northcote, Robin J; Pell, Alistair C H; Starkey, Ian R; Pell, Jill P

2008-06-01

To determine whether drug-eluting stent (DES) use varies among Scottish hospitals, and the extent to which any variations are explained by differences between operators, patients and lesions. Multi-level analysis of consecutive patients treated with percutaneous coronary intervention (PCI) between April 2005 and March 2006 in Scotland, using the Scottish Coronary Revascularization Registry. A total of 38 operators performed 5967 PCI procedures on 8489 lesions. Crude level of DES use was 47.6%, and the results varied among hospitals (range 30.6-61.8%, chi(2) = 341.6, P < 0.0001). There was significant between-operator variation in the null model. This was attenuated by the addition of hospital as a fixed effect. Nonetheless, the final model demonstrated significant between-operator variability [sigma(2) = 0.486 (0.249-0.971)] and between-hospital variation, after case-mix adjustment. Within Scotland, marked variation existed among hospitals in the use of DES. Operator was the most important factor at patient level, and hospital of treatment, rather than case-mix, was the most important modifier of between-operator variation. Patient selection for DES is complex and may contribute to much of the variations demonstrated. Consensus criteria would provide more detail than is included in current guidance, may aid decision-making for individual patients, reduce opportunity costs and ensure equity of access.

Les inconvénients de perdre du poids

PubMed Central

Bosomworth, N. John

2012-01-01

Résumé Objectif Explorer les raisons pour lesquelles la perte de poids à long terme échoue la plupart du temps et évaluer les conséquences de diverses trajectoires pondérales, y compris la stabilité, la perte et le gain. Source des données Les études qui évaluent les paramètres pondéraux dans la population sont en majorité observationnelles. Des données probantes de niveau I ont été publiées pour évaluer l’influence des interventions relatives au poids sur la mortalité et la qualité de vie. Message principal Seulement un petit pourcentage des personnes qui désirent perdre du poids réussissent à le faire de manière durable. La mortalité est la plus faible chez les personnes se situant dans la catégorie de poids élevé-normal et surpoids. La trajectoire pondérale la plus sécuritaire est la stabilité du poids avec une optimisation de la condition physique et métabolique. Il est démontré que la mortalité est plus faible chez les personnes ayant des comorbidités reliées à l’obésité si elles perdent du poids. Il est aussi établi que la qualité de vie sur le plan de la santé est meilleure chez les personnes obèses qui perdent du poids. Par contre, la perte de poids chez une personne obèse autrement en santé est associée à une mortalité accrue. Conclusion La perte de poids est recommandable seulement chez les personnes qui ont des comorbidités reliées à l’obésité. Les personnes obèses en santé qui veulent perdre du poids devraient être informées qu’il peut y avoir des risques à le faire. Une stratégie qui se traduit par un indice de masse corporelle stable avec une condition physique et métabolique optimisée, peu importe le poids, est l’option d’intervention la plus sécuritaire en ce qui concerne le poids.

Optimising energy recovery and use of chemicals, resources and materials in modern waste-to-energy plants.

PubMed

De Greef, J; Villani, K; Goethals, J; Van Belle, H; Van Caneghem, J; Vandecasteele, C

2013-11-01

Due to ongoing developments in the EU waste policy, Waste-to-Energy (WtE) plants are to be optimized beyond current acceptance levels. In this paper, a non-exhaustive overview of advanced technical improvements is presented and illustrated with facts and figures from state-of-the-art combustion plants for municipal solid waste (MSW). Some of the data included originate from regular WtE plant operation - before and after optimisation - as well as from defined plant-scale research. Aspects of energy efficiency and (re-)use of chemicals, resources and materials are discussed and support, in light of best available techniques (BAT), the idea that WtE plant performance still can be improved significantly, without direct need for expensive techniques, tools or re-design. In first instance, diagnostic skills and a thorough understanding of processes and operations allow for reclaiming the silent optimisation potential. Copyright © 2013 Elsevier Ltd. All rights reserved.

76 FR 78161 - Safety Zone, Brandon Road Lock and Dam to Lake Michigan Including Des Plaines River, Chicago...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-16

... Zone, Brandon Road Lock and Dam to Lake Michigan Including Des Plaines River, Chicago Sanitary and Ship...; Brandon Road Lock and Dam to Lake Michigan including Des Plaines River, Chicago Sanitary and Ship Canal... the U.S. Army Corps of Engineers' maintenance operations of dispersal barrier IIB. During these...

Requirements analysis for a hardware, discrete-event, simulation engine accelerator

NASA Astrophysics Data System (ADS)

Taylor, Paul J., Jr.

1991-12-01

An analysis of a general Discrete Event Simulation (DES), executing on the distributed architecture of an eight mode Intel PSC/2 hypercube, was performed. The most time consuming portions of the general DES algorithm were determined to be the functions associated with message passing of required simulation data between processing nodes of the hypercube architecture. A behavioral description, using the IEEE standard VHSIC Hardware Description and Design Language (VHDL), for a general DES hardware accelerator is presented. The behavioral description specifies the operational requirements for a DES coprocessor to augment the hypercube's execution of DES simulations. The DES coprocessor design implements the functions necessary to perform distributed discrete event simulations using a conservative time synchronization protocol.

Double protection passive pour les equipages de l’helicoptere d’attaque Tigre : Concept et etude experimentale (Design and Experimental Study of the Passive Double Hearing Protection for the Crew of the Attack Helicopter Tiger)

DTIC Science & Technology

2005-04-01

alain.leger@fr.thalesgroup.com THALES Aerospace Rue Toussaint Catros 33187 Le Haillan FRANCE RESUME Les coques des écouteurs du casque Topowl ont...déjà fait l’objet d’une étude visant à optimiser leur protection auditive dans les stricts budgets de masse et de volume impartis. La présente...techniques audio (p. 17-1 – 17-14). Compte rendu de réunion RTO-MP-HFM-123, Communication 17. Neuilly-sur-Seine, France : RTO. Disponible sur le site

Expert Opinion: Optimising Stent Deployment in Contemporary Practice: The Role of Intracoronary Imaging and Non-compliant Balloons.

PubMed

Seth, Ashok; Gupta, Sajal; Pratap Singh, Vivudh; Kumar, Vijay

2017-09-01

Final stent dimensions remain an important predictor of restenosis, target vessel revascularisation (TVR) and subacute stent thrombosis (ST), even in the drug-eluting stent (DES) era. Stent balloons are usually semi-compliant and thus even high-pressure inflation may not achieve uniform or optimal stent expansion. Post-dilatation with non-compliant (NC) balloons after stent deployment has been shown to enhance stent expansion and could reduce TVR and ST. Based on supporting evidence and in the absence of large prospective randomised outcome-based trials, post-dilatation with an NC balloon to achieve optimal stent expansion and maximal luminal area is a logical technical recommendation, particularly in complex lesion subsets.

Reticulation des fibres lignocellulosiques

NASA Astrophysics Data System (ADS)

Landrevy, Christel

Pour faire face à la crise économique la conception de papier à valeur ajoutée est développée par les industries papetières. Le but de se projet est l'amélioration des techniques actuelles de réticulation des fibres lignocellulosiques de la pâte à papier visant à produire un papier plus résistant. En effet, lors des réactions de réticulation traditionnelles, de nombreuses liaisons intra-fibres se forment ce qui affecte négativement l'amélioration anticipée des propriétés physiques du papier ou du matériau produit. Pour éviter la formation de ces liaisons intra-fibres, un greffage sur les fibres de groupements ne pouvant pas réagir entre eux est nécessaire. La réticulation des fibres par une réaction de « click chemistry » appelée cycloaddition de Huisgen entre un azide et un alcyne vrai, catalysée par du cuivre (CuAAC) a été l'une des solutions trouvée pour remédier à ce problème. De plus, une adaptation de cette réaction en milieux aqueux pourrait favoriser son utilisation en milieu industriel. L'étude que nous désirons entreprendre lors de ce projet vise à optimiser la réaction de CuAAC et les réactions intermédiaires (propargylation, tosylation et azidation) sur la pâte kraft, en milieu aqueux. Pour cela, les réactions ont été adaptées en milieu aqueux sur la cellulose microcristalline afin de vérifier sa faisabilité, puis transférée à la pâte kraft et l'influence de différents paramètres comme le temps de réaction ou la quantité de réactifs utilisée a été étudiée. Dans un second temps, une étude des différentes propriétés conférées au papier par les réactions a été réalisée à partir d'une série de tests papetiers optiques et physiques. Mots Clés Click chemistry, Huisgen, CuAAC, propargylation, tosylation, azidation, cellulose, pâte kraft, milieu aqueux, papier.

Design of distributed PID-type dynamic matrix controller for fractional-order systems

NASA Astrophysics Data System (ADS)

Wang, Dawei; Zhang, Ridong

2018-01-01

With the continuous requirements for product quality and safety operation in industrial production, it is difficult to describe the complex large-scale processes with integer-order differential equations. However, the fractional differential equations may precisely represent the intrinsic characteristics of such systems. In this paper, a distributed PID-type dynamic matrix control method based on fractional-order systems is proposed. First, the high-order approximate model of integer order is obtained by utilising the Oustaloup method. Then, the step response model vectors of the plant is obtained on the basis of the high-order model, and the online optimisation for multivariable processes is transformed into the optimisation of each small-scale subsystem that is regarded as a sub-plant controlled in the distributed framework. Furthermore, the PID operator is introduced into the performance index of each subsystem and the fractional-order PID-type dynamic matrix controller is designed based on Nash optimisation strategy. The information exchange among the subsystems is realised through the distributed control structure so as to complete the optimisation task of the whole large-scale system. Finally, the control performance of the designed controller in this paper is verified by an example.

Statistical and Probabilistic Extensions to Ground Operations' Discrete Event Simulation Modeling

NASA Technical Reports Server (NTRS)

Trocine, Linda; Cummings, Nicholas H.; Bazzana, Ashley M.; Rychlik, Nathan; LeCroy, Kenneth L.; Cates, Grant R.

2010-01-01

NASA's human exploration initiatives will invest in technologies, public/private partnerships, and infrastructure, paving the way for the expansion of human civilization into the solar system and beyond. As it is has been for the past half century, the Kennedy Space Center will be the embarkation point for humankind's journey into the cosmos. Functioning as a next generation space launch complex, Kennedy's launch pads, integration facilities, processing areas, launch and recovery ranges will bustle with the activities of the world's space transportation providers. In developing this complex, KSC teams work through the potential operational scenarios: conducting trade studies, planning and budgeting for expensive and limited resources, and simulating alternative operational schemes. Numerous tools, among them discrete event simulation (DES), were matured during the Constellation Program to conduct such analyses with the purpose of optimizing the launch complex for maximum efficiency, safety, and flexibility while minimizing life cycle costs. Discrete event simulation is a computer-based modeling technique for complex and dynamic systems where the state of the system changes at discrete points in time and whose inputs may include random variables. DES is used to assess timelines and throughput, and to support operability studies and contingency analyses. It is applicable to any space launch campaign and informs decision-makers of the effects of varying numbers of expensive resources and the impact of off nominal scenarios on measures of performance. In order to develop representative DES models, methods were adopted, exploited, or created to extend traditional uses of DES. The Delphi method was adopted and utilized for task duration estimation. DES software was exploited for probabilistic event variation. A roll-up process was used, which was developed to reuse models and model elements in other less - detailed models. The DES team continues to innovate and expand DES capabilities to address KSC's planning needs.

Moteurs piézo-électriques à onde progressive : I. Modélisation de la conversion d'énergie mécanique à l'interface stator/rotor

NASA Astrophysics Data System (ADS)

Minotti, P.; Le Moal, P.; Buchaillot, L.; Ferreira, A.

1996-10-01

The modeling of traveling wave type piezoelectric motors involves a large variety of mechanical and physical phenomena and therefore leads to numerous approaches and models. The latter, mainly based on phenomenological and numerical (based on Finite Element Method) analyses, are not suitable for current objectives oriented toward the development of efficient C.A.D. tools. As a result, an attempt is done to investigate analytical approaches, in order to theoretically model the mechanical energy conversion at the stator/rotor interface. This paper is the first in a serie of three articles devoted to the modeling of such rotative motors. After a short description of the operating principles specific to the piezomotors, the mechanical and tribological assumptions made for the driving mechanism of the rotor are briefly described. Then it is shown that the kinematic and dynamic modeling of the stator, combined with the static representation of the stator/rotor interface, gives an efficient way in order to perform the calculation of the loading characteristics of the driving shaft. Finally, the specifications of a new software named C.A.S.I.M.M.I.R.E., which has been recently developed on the basis of our earlier mechanical modeling, are described. In the last of these three papers, the theoretical simulations performed on SHINSEI Japanese motors will show to be close to the experimental data and that the results reported in this paper will lead to the structural optimization of future traveling wave ultrasonic motors. La modélisation des moteurs piézo-électriques à onde progressive implique une grande variété de phénomènes physiques et mécaniques. Cette variété conduit à des approches et modèles tout aussi nombreux et variés, qui reposent principalement sur des analyses phénoménologiques et numériques (Méthode Élements Finis), et ne permettent pas de répondre aux éxigences actuelles concernant le développement d'outils C.A.O. performants. Cette nécessité nous a conduits à développer une modélisation théorique analytique de la conversion d'énergie à l'interface stator/rotor. Ce papier est le premier d'une série de trois articles consacrés à la modélisation des moteurs piézo-électriques rotatifs. Après une rapide description des principes de fonctionnement de ces piézomoteurs, les hypothèses mécaniques et tribologiques concernant le mécanisme d'entraînement du rotor sont énoncées succinctement. On démontre ensuite que la modélisation cinématique et dynamique du stator, combinée à une représentation statique du comportement à l'interface stator/rotor, autorise l'évaluation des caractéristiques en charge des moteurs à onde progressive. Enfin, le logiciel baptisé C.A.S.I.M.M.I.R.E., récemment développé sur la base de la modélisation mécanique précédente, est présenté puis testé. Dans le dernier article de cette série, nous confirmerons la validité des simulations théoriques issues de ce logiciel, à partir de la caractérisation expérimentale de moteurs japonais de la firme SHINSEI. Ce nouveau logiciel constitue d'ores et déjà un outil performant en vue de l'optimisation des futurs moteurs à onde progressive, et a déjà fait l'objet d'une première exploitation en milieu industriel.

Performance Prediction and Simulation of Gas Turbine Engine Operation (La presision des performances et la simulation du fonctionnement des turbomoteurs)

DTIC Science & Technology

2002-04-01

configuration associated with the HSCT program was analyzed in terms of inlet unstart and the effect of the regurgitated shock wave. Inlet start is a...heavily loaded take off or dog -fight phases of flight. Less critical issues, such as thrust loss during supersonic operations, may also appear. From the

Active Control Technology for Enhanced Performance Operational Capabilities of Military Aircraft, Land Vehicles and Sea Vehicles (Technologies des systemes a commandes actives pour l’amelioration des performances operationnelles des aeronefs militaires, des vehicules terrestres et des vehicules maritimes)

DTIC Science & Technology

2001-06-01

Corrège Buffet Active Control - Experimental and Numerical Results 15 by C. Despré, D. Caruana, A. Mignosi, O. Reberga, M. Corrège, H. Gassot, J.C...Park and S. Menon An Experimental Examination of the Relationship Between Chemiluminescent Light 20 Emissions and Heat-Release Rate Under Non -Adiabatic...D.A. Santavicca An Experimental Study on Actively Controlled Dump Combustors 36 by K. Yu, K.J. Wilson, T.P. Parr and K.C. Schadow xii Theme The

Vertical transportation systems embedded on shuffled frog leaping algorithm for manufacturing optimisation problems in industries.

PubMed

Aungkulanon, Pasura; Luangpaiboon, Pongchanun

2016-01-01

Response surface methods via the first or second order models are important in manufacturing processes. This study, however, proposes different structured mechanisms of the vertical transportation systems or VTS embedded on a shuffled frog leaping-based approach. There are three VTS scenarios, a motion reaching a normal operating velocity, and both reaching and not reaching transitional motion. These variants were performed to simultaneously inspect multiple responses affected by machining parameters in multi-pass turning processes. The numerical results of two machining optimisation problems demonstrated the high performance measures of the proposed methods, when compared to other optimisation algorithms for an actual deep cut design.

Caracterisation environnementale des emissions atmospheriques d'une source fixe et creation d'un outil de gestion dynamique =

NASA Astrophysics Data System (ADS)

Fournier, Marie-Claude

Une caracterisation des emissions atmospheriques provenant des sources fixes en operation, alimentees au gaz et a l'huile legere, a ete conduite aux installations visees des sites no.1 et no.2. La caracterisation et les calculs theoriques des emissions atmospheriques aux installations des sites no.1 et no.2 presentent des resultats qui sont en dessous des valeurs reglementaires pour des conditions d'operation normales en periode hivernale et par consequent, a de plus fortes demandes energetiques. Ainsi, pour une demande energetique plus basse, le taux de contaminants dans les emissions atmospheriques pourrait egalement etre en dessous des reglementations municipales et provinciales en vigueur. Dans la perspective d'une nouvelle reglementation provinciale, dont les termes sont discutes depuis 2005, il serait souhaitable que le proprietaire des infrastructures visees participe aux echanges avec le Ministere du Developpement Durable, de l'Environnement et des Parcs (MDDEP) du Quebec. En effet, meme si le principe de droit acquis permettrait d'eviter d'etre assujetti a la nouvelle reglementation, l'application de ce type de principe ne s'inscrit pas dans ceux d'un developpement durable. L'âge avance des installations etudiees implique la planification d'un entretien rigoureux afin d'assurer les conditions optimales de combustion en fonction du type de combustible. Des tests de combustion sur une base reguliere sont donc recommandes. Afin de supporter le processus de suivi et d'evaluation de la performance environnementale des sources fixes, un outil d'aide a la gestion de l'information environnementale a ete developpe. Dans ce contexte, la poursuite du developpement d'un outil d'aide a la gestion de l'information environnementale faciliterait non seulement le travail des personnes affectees aux inventaires annuels mais egalement le processus de communication entre les differents acteurs concernes tant intra- qu'inter-etablissement. Cet outil serait egalement un bon moyen pour sensibiliser le personnel a leur consommation energetique ainsi qu'a leur role dans la lutte contre les emissions polluantes et les gaz a effets de serre. En outre, ce type d'outil a pour principale fonction de generer des rapports dynamiques pouvant s'adapter a des besoins precis. Le decoupage coherent de l'information associe a un developpement par modules offre la perspective d'application de l'outil pour d'autres types d'activites. Dans ce cas, il s'agit de definir la part commune avec les modules existants et planifier les activites de developpement specifiques selon la meme demarche que celle presentee dans le present document.

The Shared Burden: United States-French Coalition Operations in the European Theater of World War II

DTIC Science & Technology

2013-05-23

French; Henri Amouroux’s La grande histoire des Francais sous l’occupation, un 6... Histoire et Collections, 2004), 15. 27 Headquarters, Sixth Army Group Narrative History, Box 1, Supreme Headquarters Allied Expeditionary Force, Sixth...Headquarters, Department of Defense. JP 5-0: Joint Operations Planning, 2011. Historical Studies and Theory Amouroux, Henri. La Grande Histoire des Français

Operational modes, health, and status monitoring

NASA Astrophysics Data System (ADS)

Taljaard, Corrie

2016-08-01

System Engineers must fully understand the system, its support system and operational environment to optimise the design. Operations and Support Managers must also identify the correct metrics to measure the performance and to manage the operations and support organisation. Reliability Engineering and Support Analysis provide methods to design a Support System and to optimise the Availability of a complex system. Availability modelling and Failure Analysis during the design is intended to influence the design and to develop an optimum maintenance plan for a system. The remote site locations of the SKA Telescopes place emphasis on availability, failure identification and fault isolation. This paper discusses the use of Failure Analysis and a Support Database to design a Support and Maintenance plan for the SKA Telescopes. It also describes the use of modelling to develop an availability dashboard and performance metrics.

Progress in Military Airlift: The Flight Mechanics Panel Symposium Held in Lisbon, Portugal on 28-31 May 1990 (Les Progres Realises dans le Domaine du Transport Aerien Militaire)

DTIC Science & Technology

1990-12-01

maintenue lora des operations militaires futures. iusqu’ici, en raison des contraintes 6cononsiques, les technologies entrant dans la construction des ...transport qui sont en service & l’eure actuelie sont vicillissantes, techniquernent demodees et de momns en momns aptes a repondre aux exigences de ...combustibles, lea L . ~propulseurs et [a conception a6rodynarnique, ainai qsuun r~sumi des programmes en cours et prevu. 4 Flight Mechanics Panel

Five Themes Impacting Collaboration in a Joint Interagency Multinational Public Operational Context (Les cinq Facteurs Influencant la Collaboration en Contexte Operationnel Interarmees, Interorganisationnel, Multinational et Public)

DTIC Science & Technology

2011-03-01

cited by the Director of Land Concepts and Designs as an important enabler for the Army of Tomorrow operating concept of adaptive dispersed operations...2010). La partie 1.3 porte sur l’influence du pouvoir sur la collaboration. Étant donné l’ampleur des FC comparativement à celle de la plupart des...Multinational Public (JIMP) operating environment, the capacity to be "JIMP-capable" is now cited by the Director of Land Concepts and Designs as an important

Multiobjective optimisation of bogie suspension to boost speed on curves

NASA Astrophysics Data System (ADS)

Milad Mousavi-Bideleh, Seyed; Berbyuk, Viktor

2016-01-01

To improve safety and maximum admissible speed on different operational scenarios, multiobjective optimisation of bogie suspension components of a one-car railway vehicle model is considered. The vehicle model has 50 degrees of freedom and is developed in multibody dynamics software SIMPACK. Track shift force, running stability, and risk of derailment are selected as safety objective functions. The improved maximum admissible speeds of the vehicle on curves are determined based on the track plane accelerations up to 1.5 m/s2. To attenuate the number of design parameters for optimisation and improve the computational efficiency, a global sensitivity analysis is accomplished using the multiplicative dimensional reduction method (M-DRM). A multistep optimisation routine based on genetic algorithm (GA) and MATLAB/SIMPACK co-simulation is executed at three levels. The bogie conventional secondary and primary suspension components are chosen as the design parameters in the first two steps, respectively. In the last step semi-active suspension is in focus. The input electrical current to magnetorheological yaw dampers is optimised to guarantee an appropriate safety level. Semi-active controllers are also applied and the respective effects on bogie dynamics are explored. The safety Pareto optimised results are compared with those associated with in-service values. The global sensitivity analysis and multistep approach significantly reduced the number of design parameters and improved the computational efficiency of the optimisation. Furthermore, using the optimised values of design parameters give the possibility to run the vehicle up to 13% faster on curves while a satisfactory safety level is guaranteed. The results obtained can be used in Pareto optimisation and active bogie suspension design problems.

What We Did Last Summer: Depicting DES Data to Enhance Simulation Utility and Use

NASA Technical Reports Server (NTRS)

Elfrey, Priscilla; Conroy, Mike; Lagares, Jose G.; Mann, David; Fahmi, Mona

2009-01-01

At Kennedy Space Center (KSC), an important use of Discrete Event Simulation (DES) addresses ground operations .of missions to space. DES allows managers, scientists and engineers to assess the number of missions KSC can complete on a given schedule within different facilities, the effects of various configurations of resources and detect possible problems or unwanted situations. For fifteen years, DES has supported KSC efficiency, cost savings and improved safety and performance. The dense and abstract DES data, however, proves difficult to comprehend and, NASA managers realized, is subject to misinterpretation, misunderstanding and even, misuse. In summer 2008, KSC developed and implemented a NASA Exploration Systems Mission Directorate (ESMD) project based on the premise that visualization could enhance NASA's understanding and use of DES.

Optimising resolution for a preparative separation of Chinese herbal medicine using a surrogate model sample system.

PubMed

Ye, Haoyu; Ignatova, Svetlana; Peng, Aihua; Chen, Lijuan; Sutherland, Ian

2009-06-26

This paper builds on previous modelling research with short single layer columns to develop rapid methods for optimising high-performance counter-current chromatography at constant stationary phase retention. Benzyl alcohol and p-cresol are used as model compounds to rapidly optimise first flow and then rotational speed operating conditions at a preparative scale with long columns for a given phase system using a Dynamic Extractions Midi-DE centrifuge. The transfer to a high value extract such as the crude ethanol extract of Chinese herbal medicine Millettia pachycarpa Benth. is then demonstrated and validated using the same phase system. The results show that constant stationary phase modelling of flow and speed with long multilayer columns works well as a cheap, quick and effective method of optimising operating conditions for the chosen phase system-hexane-ethyl acetate-methanol-water (1:0.8:1:0.6, v/v). Optimum conditions for resolution were a flow of 20 ml/min and speed of 1200 rpm, but for throughput were 80 ml/min at the same speed. The results show that 80 ml/min gave the best throughputs for tephrosin (518 mg/h), pyranoisoflavone (47.2 mg/h) and dehydrodeguelin (10.4 mg/h), whereas for deguelin (100.5 mg/h), the best flow rate was 40 ml/min.

Operational Problems Associated with Head-Up Displays during Instrument Flight.

DTIC Science & Technology

1980-10-01

Force project engineers were Major Michael F. Rundle and Mr. William L. Welde . 41 4 TABLE OF CONTENTS Page ABBREVIATIONS...of Automotive Engineers SETP Society of Experimental Test Pilots SI Solid Instruments SNPL Syndicat National des Pilotes des Lignes (French ALPA) TACAN...Factors Relevent to Jet Upsets ," Lessons with Emphasis on Flight Mechanics from Operating Experience, Incidents, and Accidents, AGARD CP-76, 1971 153 J

Hierarchical Discrete Event Supervisory Control of Aircraft Propulsion Systems

NASA Technical Reports Server (NTRS)

Yasar, Murat; Tolani, Devendra; Ray, Asok; Shah, Neerav; Litt, Jonathan S.

2004-01-01

This paper presents a hierarchical application of Discrete Event Supervisory (DES) control theory for intelligent decision and control of a twin-engine aircraft propulsion system. A dual layer hierarchical DES controller is designed to supervise and coordinate the operation of two engines of the propulsion system. The two engines are individually controlled to achieve enhanced performance and reliability, necessary for fulfilling the mission objectives. Each engine is operated under a continuously varying control system that maintains the specified performance and a local discrete-event supervisor for condition monitoring and life extending control. A global upper level DES controller is designed for load balancing and overall health management of the propulsion system.

Facteurs de risque de l'inobservance thérapeutique chez les patients schizophrènes: étude cas- témoins'

PubMed Central

Aarab, Chadya; Elghazouani, Fatima; Aalouane, Rachid; Rammouz, Ismail

2015-01-01

Les progrès réalisés dans le traitement de la schizophrénie n'ont jusqu'ici pas modifié de manière radicale l'importance de l'adhésion des patients à leur médication. L'objectif de ce travail est d'identifier les facteurs de risque de l'abandon du traitement sur un échantillon marocain de malades schizophrènes. C'est une étude transversale menée au centre psychiatrique universitaire de Fès sur une période de 4 mois. Les malades inclus présentaient une schizophrénie ou un trouble schizo-affectif, sélectionnés en deux groupes observant et non observant. L’évaluation de l'observance a été faite par un hétéro-questionnaire comprenant une liste de causes d'abandon du traitement avec des réponses par oui ou non et à l'aide de l’échelle MARS (Medication Adherence Rating Scale). Le traitement statistique des résultats a été réalisé par le logiciel Epi Info version 3.5.1. On a recruté 164 participants, 112 étaient des malades non observants à leur traitement (cas) et 52 patients bien observants (témoins). L’âge moyen est 31 ans, avec une prédominance masculine. Les facteurs de risque d'inobservance thérapeutique sont: l’âge jeune, le sexe masculin, le célibat, les troubles addictifs. Les principales raisons d'abandon du traitement sont le changement fréquent du médecin, le manque d'informations sur la maladie, un mauvais insight et les effets secondaires des antipsychotiques. Le groupe de schizophrènes non adhérents à leur traitement pharmacologique avait un score élevé à l’échelle MARS dans 80% cas. Ces résultats doivent être pris en considération par le personnel soignant pour optimiser l'observance thérapeutique chez les patients souffrant de schizophrénie. PMID:26161196

Identification des objets et detection de leur alignement en utilisant la technologie RFID

NASA Astrophysics Data System (ADS)

Rahma, Zayoud

De nos jours, les vehicules motorises sont essentiels dans notre vie quotidienne, d'ou la necessite de leur approvisionnement en carburant. L'approvisionnement en carburant peut entrainer certains inconvenients, tels que: les files d'attente, la disponibilite non-continuelle du carburant et les fraudes. Les problemes d'attente et de disponibilite non-continuelle du carburant peuvent etre facilement resolus en allant a une autre station d'essence aux alentours si disponibles. Par contre le probleme de fraudes est plus difficile a resoudre. De ce fait, decoule notre solution qui consiste a developper un systeme intelligent pour la gestion d'approvisionnement en carburant afin de remedier a ce probleme de fraudes. Pour des raisons de surete, il faut eviter les risques d'etincelles dans l'environnement du carburant. En particulier, il convient de ne pas utiliser un systeme utilisant 1'electricite proche de la pompe, du tuyau ou du reservoir du carburant du vehicule. Nous avons choisi la technologie RFID (Radio Frequency IDentification) et avons opte pour l'utilisation des etiquettes passives, etant donne que les etiquettes semi-passives ou actives contiennent une batterie electrique et sont nettement plus cheres. Un vehicule motorise sera identifie avec une etiquette RFID passive collee au-dessus du goulot de son reservoir. Deux autres etiquettes RFID seront placees sur le pistolet de sorte que le flux du carburant ne sera autorise que lorsque les trois etiquettes sont alignees. Notre travail etait a la demande d'une entreprise petroliere ayant une chaine internationale de stations de carburant. Le travail consiste en la conception, par la recherche, du systeme requis et s'articule sur l'optimisation de la topologie des antennes et des etiquettes de sorte que le systeme juge qu'il y a alignement lorsque le bec du pistolet est fonce dans le goulot du reservoir, et par consequent autorise le versement du carburant. Dans tous les autres cas, le systeme doit juger qu'il n'y a pas alignement et par consequent le flux du carburant n'est pas autorise. Mots cles: RFID, identification, localisation, alignement, fraudes, station-service.

Implantate für den Bandscheibenersatz (Stand 1993)

NASA Astrophysics Data System (ADS)

Mathey, Michael; Wintermantel, Erich

Die Bandscheiben sind besonders betroffen von Fehlhaltungen und -stellungen der Wirbelsäule. Sie unterliegen als grösstes zusammenhängendes, nicht vaskularisiertes Gewebe im Menschen, statisch und dynamisch extrem belastet, besonders der Alterung. Um die teilweise sehr starken Schmerzen bei Bandscheibenschädigungen zu lindern, ist eine Operation vielfach die einzige Hilfe. Bei dieser Operation (Nukleotomie) entfernt man das aus der Bandscheibe ausgetretene Gewebe des Gallertkerns (nucleus pulposus), welches durch Druck auf die Nervenstränge im Bereich der Wirbelsäule die Beschwerden (Ischias-Schmerz) verursacht hat. Nach der Entfernung des Gallertkerns werden die auftretenden Kräfte bei veränderter Biomechanik übertragen. Dabei erhalten die Zwischenwirbelgelenke (Facettengelenke) eine erheblich grössere Flächenpressung als dies bei intakter Bandscheibe der Fall war. Die höhere Flächenpressung kommt durch die Verringerung des Abstandes zwischen den oberen und unteren Deckplatten der benachbarten Wirbelkörper zustande, zwischen denen sich der Gallertkern befand. Durch geeignetes Training der Rückenmuskulatur kann eine Stabilisierung des operierten Bandscheibensegmentes erreicht werden, jedoch ist es eine klinische Erfahrung, dass die meisten Patienten, die momentan durch die Operation schmerzfrei geworden sind, keine adäquate zusätzliche sportliche Betätigung auf sich nehmen.

E-O Propagation, Signature and System Performance Under Adverse Meteorological Conditions Considering Out-of-Area Operations (La Propagation, la Signature et les performances des Systemes optroniques dans des Conditions Meteorologiques Defavorables, compte Tenu des Operations hors Zone)

DTIC Science & Technology

1998-09-01

distribution CSAS-100-HV 7 m (Surf-2) 0.16-32 .gm PMS2 CSASP-200 Base of Pier 15 m (Surf-1,3) Aerosol size distribution 11.2 m (Surf-2) 0.2-20 pm PMS3 CSASP-100...270 4 180 V ~C2 go 1P-2 PMS3.(6m..) PM.Sl.(12.) PMS2 in.)... ...... Reference -2- ....... .... ..... ............... kn - .2 25 26 27 28 Day number...1 (12 in) are presently available do not allow for a more sophisticated 3 ..... PMS2 (15 m) approach. 2 The horizontal aerosol flux downwind from the

Neurological Limitations of Aircraft Operations: Human Performance Implications (les Limitations neurologiques des operations aeriennes: les Consequences pour les performances des equipages).

DTIC Science & Technology

1996-04-01

Amniotic fluid Debris?* Young women Long bone fracture Fat * Any age Chronic intravenous drug users Talc* Any age Disseminated intravascular coagulapathy...maximal stress at which bone fracture occurs. This study demonstrated the usefulness of finite Results from centrifuge experiments element analysis for...Vine Street M/S 455 Philadelphia, PA 19102-1192, USA SUMMARY Exposure to Impact Acceleration (15). In these reports, fracture of the bones, dislocation

Influence Operations: Historical and Contemporary Dimensions (Les Dimensions Historiques et Contemporaines des Operations d’Influence)

DTIC Science & Technology

2007-07-31

Howard Coombs Scientific Authority: Keith Stewart Defence Research and Development (DRDC) - Toronto Command Effectiveness and Behaviour...as an unbiased and neutral nation, the reality of Canadian participation in the international community is grounded in pragmatism and a desire to...coalition ou les autres organismes au sein desquels ils l’ont acquise. Malgré sa diversité, l’expérience acquise a des points communs , dont l’acceptation

Automated model optimisation using the Cylc workflow engine (Cyclops v1.0)

NASA Astrophysics Data System (ADS)

Gorman, Richard M.; Oliver, Hilary J.

2018-06-01

Most geophysical models include many parameters that are not fully determined by theory, and can be tuned to improve the model's agreement with available data. We might attempt to automate this tuning process in an objective way by employing an optimisation algorithm to find the set of parameters that minimises a cost function derived from comparing model outputs with measurements. A number of algorithms are available for solving optimisation problems, in various programming languages, but interfacing such software to a complex geophysical model simulation presents certain challenges. To tackle this problem, we have developed an optimisation suite (Cyclops) based on the Cylc workflow engine that implements a wide selection of optimisation algorithms from the NLopt Python toolbox (Johnson, 2014). The Cyclops optimisation suite can be used to calibrate any modelling system that has itself been implemented as a (separate) Cylc model suite, provided it includes computation and output of the desired scalar cost function. A growing number of institutions are using Cylc to orchestrate complex distributed suites of interdependent cycling tasks within their operational forecast systems, and in such cases application of the optimisation suite is particularly straightforward. As a test case, we applied the Cyclops to calibrate a global implementation of the WAVEWATCH III (v4.18) third-generation spectral wave model, forced by ERA-Interim input fields. This was calibrated over a 1-year period (1997), before applying the calibrated model to a full (1979-2016) wave hindcast. The chosen error metric was the spatial average of the root mean square error of hindcast significant wave height compared with collocated altimeter records. We describe the results of a calibration in which up to 19 parameters were optimised.

Optimal Discrete Event Supervisory Control of Aircraft Gas Turbine Engines

NASA Technical Reports Server (NTRS)

Litt, Jonathan (Technical Monitor); Ray, Asok

2004-01-01

This report presents an application of the recently developed theory of optimal Discrete Event Supervisory (DES) control that is based on a signed real measure of regular languages. The DES control techniques are validated on an aircraft gas turbine engine simulation test bed. The test bed is implemented on a networked computer system in which two computers operate in the client-server mode. Several DES controllers have been tested for engine performance and reliability.

Critical review of membrane bioreactor models--part 2: hydrodynamic and integrated models.

PubMed

Naessens, W; Maere, T; Ratkovich, N; Vedantam, S; Nopens, I

2012-10-01

Membrane bioreactor technology exists for a couple of decades, but has not yet overwhelmed the market due to some serious drawbacks of which operational cost due to fouling is the major contributor. Knowledge buildup and optimisation for such complex systems can heavily benefit from mathematical modelling. In this paper, the vast literature on hydrodynamic and integrated MBR modelling is critically reviewed. Hydrodynamic models are used at different scales and focus mainly on fouling and only little on system design/optimisation. Integrated models also focus on fouling although the ones including costs are leaning towards optimisation. Trends are discussed, knowledge gaps identified and interesting routes for further research suggested. Copyright © 2012 Elsevier Ltd. All rights reserved.

Group search optimiser-based optimal bidding strategies with no Karush-Kuhn-Tucker optimality conditions

NASA Astrophysics Data System (ADS)

Yadav, Naresh Kumar; Kumar, Mukesh; Gupta, S. K.

2017-03-01

General strategic bidding procedure has been formulated in the literature as a bi-level searching problem, in which the offer curve tends to minimise the market clearing function and to maximise the profit. Computationally, this is complex and hence, the researchers have adopted Karush-Kuhn-Tucker (KKT) optimality conditions to transform the model into a single-level maximisation problem. However, the profit maximisation problem with KKT optimality conditions poses great challenge to the classical optimisation algorithms. The problem has become more complex after the inclusion of transmission constraints. This paper simplifies the profit maximisation problem as a minimisation function, in which the transmission constraints, the operating limits and the ISO market clearing functions are considered with no KKT optimality conditions. The derived function is solved using group search optimiser (GSO), a robust population-based optimisation algorithm. Experimental investigation is carried out on IEEE 14 as well as IEEE 30 bus systems and the performance is compared against differential evolution-based strategic bidding, genetic algorithm-based strategic bidding and particle swarm optimisation-based strategic bidding methods. The simulation results demonstrate that the obtained profit maximisation through GSO-based bidding strategies is higher than the other three methods.

Intrinsic mechanical properties and strengthening methods in inorganic crystalline materials

NASA Astrophysics Data System (ADS)

Mecking, H.; Hartig, Ch.; Seeger, J.

1991-06-01

The paper deals with strength and fracture in metals, ceramics and intermetallic compounds. The emphasis is on the interrelation between microstructure and macroscopic behavior and how the concepts for alloy design are mirroring this interrelationship. The three materials classes are distinguished by the physical nature of the atomic bonding forces. In metals metallic bonding predominates which causes high ductility but poor strength. Accordingly material development concentrates on production of microstructures which optimize the yield strength without unacceptable loss in ductility. In ceramics covalent bonding prevails which results in high hardness and high elastic stiffness but at the same time extreme brittleness. Contrary to the metal-ease material development aims at a kind of pseudo ductility in order to rise the fracture toughness to sufficiently high levels. In intermetallic phases the atomic bonds are a mixture of metallic and covalent bonding where depending on the alloying system the balance between the two contributions may be quite different. Accordingly the properties of intermetallics are in the range between metals and ceramics. By a variety of microstructural measures their properties can be changed in direction. either towards metallic or ceramic behavior. General rules for alloy design are not available, rather every system demands very specific experience since properties depend to a considerable part on intrinsic properties of lattice defects such as dislocations, antiphase boundaries, stacking faults and grain boundaries. Cet article traite de la résistance et de la fracture des métaux, des céramiques et des composés intermétalliques. L'accent est mis sur les correspondances entre la microstructure et le comportement macroscopique ainsi que sur la façon dont de tels concepts se reflètent dans la création de nouveaux alliages. C'est la nature des forces de liaisons qui distingue chaque type de matériaux. Dans les métaux, les liaisons métalliques dominent, ce qui entraîne une grande ductilité mais une médiocre résistance. En conséquence, dans le développement de nouveaux matériaux on cherche préférentiellement à produire des microstructures qui optimisent la résistance élastique sans perte inacceptable de ductilité. Dans les céramiques, les liaisons covalentes prédominent; ceci entraîne une dureté élevée, une grande rigidité, mais en même temps une extrême fragilité. Au contraire des métaux, le développement de ces matériaux vise à obtenir une pseudoductilité afin d'amener la tenacité à des niveaux suffisamment élevés. Dans les phases intermétalliques les liaisons atomiques correspondent à un mélange de liaisons métalliques et covalentes. La contribution de chacune d'entre elles varie en fonction du système allié. En conséquence, les propriétés des intermétalliques se situent entre celles des métaux et des céramiques. Par divers changements microstructuraux des propriétés peuvent être déplacées pour se rapprocher d'un comportement de type métallique ou de type céramique. Donner des règles générales pour la création de nouveaux alliages n'est pas possible car chaque système demande à être testé, les propriétés dépendent en effet, pour une part considérable, des propriétés intrinsèques des défauts de réseau comme les dislocations, les parois d'antiphase ou les joints de grains.

THE EUROPEAN INSTITUTE OF BUSINESS ADMINISTRATION (INSTITUT EUROPEEN D’ADMINISTRATION DES AFFAIRES - INSEAD).

DTIC Science & Technology

The European Institute of Business Adminstration (Institut Europeen d’Administration Des Affaires - INSEAD) is a unique school of management science...Its trilingual (English, French, German) character permeates the entire operation. INSEAD uses the Harvard Business School case study method almost

Estimating ICU bed capacity using discrete event simulation.

PubMed

Zhu, Zhecheng; Hen, Bee Hoon; Teow, Kiok Liang

2012-01-01

The intensive care unit (ICU) in a hospital caters for critically ill patients. The number of the ICU beds has a direct impact on many aspects of hospital performance. Lack of the ICU beds may cause ambulance diversion and surgery cancellation, while an excess of ICU beds may cause a waste of resources. This paper aims to develop a discrete event simulation (DES) model to help the healthcare service providers determine the proper ICU bed capacity which strikes the balance between service level and cost effectiveness. The DES model is developed to reflect the complex patient flow of the ICU system. Actual operational data, including emergency arrivals, elective arrivals and length of stay, are directly fed into the DES model to capture the variations in the system. The DES model is validated by open box test and black box test. The validated model is used to test two what-if scenarios which the healthcare service providers are interested in: the proper number of the ICU beds in service to meet the target rejection rate and the extra ICU beds in service needed to meet the demand growth. A 12-month period of actual operational data was collected from an ICU department with 13 ICU beds in service. Comparison between the simulation results and the actual situation shows that the DES model accurately captures the variations in the system, and the DES model is flexible to simulate various what-if scenarios. DES helps the healthcare service providers describe the current situation, and simulate the what-if scenarios for future planning.

Epidémiologie et facteurs de risque des complications respiratoires majeures après chirurgie de l'aorte abdominale au CHU Ibn Sina, Maroc

PubMed Central

Awab, Almahdi; Elahmadi, Brahim; Lamkinsi, Tarik; El Moussaoui, Rachid; El Hijri, Ahmed; Azzouzi, Abderrahim; Alilou, Mustapha

2013-01-01

Introduction L'incidence des complications respiratoires postopératoires (CRPO) reste très diversement appréciées selon les critères diagnostiques retenues dans les différentes études, ce qui la fait varier de 5 à plus de 50%. Les CRPO majeurs après chirurgie de l'aorte abdominale sont responsables d'une grande morbi-mortalité pouvant aller jusqu’à 36%, d'une durée d'hospitalisation et d'un coût plus importants. Ainsi dans l'optique d'améliorer notre prise en charge périopératoire de la chirurgie de l'aorte, nous avons décidé de mener une étude pour dresser le profil épidémiologique et déterminer les facteurs de risque des complications respiratoires dans notre contexte Méthodes Il s'agit d'une étude de cohorte rétrospective du mois de Janvier 2007 au mois de décembre 2011 portant sur l'ensemble des patients opérés pour pathologie aortique au bloc opératoire central de l'hôpital Ibn Sina de Rabat, Maroc. Résultats Cent vingt cinq patients ont été inclus dans notre étude, 24 patients ont été opérés pour anévrysme de l'aorte abdominale et 101 patients pour lésion occlusive aortoiliaque. Dans notre série 22 malades soit 17,6% ont présenté une complication respiratoire majeure avec, une reventilation dans 4,8% des cas, une difficulté de sevrage de la ventilation artificielle dans 3,2% des cas, une pneumopathie dans 4% des cas, un syndrome de détresse respiratoire aigue (SDRA) dans 4% des cas et une nécessité de fibroaspiration bronchique dans 1,6% des cas. En analyse univariée: l’âge, la présence d'une BPCO avec dyspnée stade 3 ou 4, la présence d'une anomalie à l'EFR préopératoire, la présence d'un stade avancé (III ou IV) de LOAI et la reprise chirurgicale étaient statistiquement associés à la survenue d'une complication respiratoire postopératoire. En analyse multivariée, seule une anomalie à l'EFR en préopératoire constituait un facteur de risque indépendant de survenue d'une complication respiratoire postopératoire dans notre série avec un Odds Ratio (OR): 11,5; un Intervalle de Confiance (IC) à 95% de (1,6 - 85,2) et un p = 0,016. Conclusion Au terme de notre étude, il nous parait donc nécessaire pour diminuer l'incidence des CRPO majeurs dans notre population, d'agir sur les facteurs que nous jugeons modifiables tel l'amélioration de l’état respiratoire basal moyennant une préparation respiratoire préopératoire, s'intégrant dans un véritable programme de réhabilitation et associant une rééducation à l'effort, une kinésithérapie incitative ainsi qu'une optimisation des thérapeutiques habituelles. PMID:23504435

Evolving optimised decision rules for intrusion detection using particle swarm paradigm

NASA Astrophysics Data System (ADS)

Sivatha Sindhu, Siva S.; Geetha, S.; Kannan, A.

2012-12-01

The aim of this article is to construct a practical intrusion detection system (IDS) that properly analyses the statistics of network traffic pattern and classify them as normal or anomalous class. The objective of this article is to prove that the choice of effective network traffic features and a proficient machine-learning paradigm enhances the detection accuracy of IDS. In this article, a rule-based approach with a family of six decision tree classifiers, namely Decision Stump, C4.5, Naive Baye's Tree, Random Forest, Random Tree and Representative Tree model to perform the detection of anomalous network pattern is introduced. In particular, the proposed swarm optimisation-based approach selects instances that compose training set and optimised decision tree operate over this trained set producing classification rules with improved coverage, classification capability and generalisation ability. Experiment with the Knowledge Discovery and Data mining (KDD) data set which have information on traffic pattern, during normal and intrusive behaviour shows that the proposed algorithm produces optimised decision rules and outperforms other machine-learning algorithm.

Multi-objective thermodynamic optimisation of supercritical CO2 Brayton cycles integrated with solar central receivers

NASA Astrophysics Data System (ADS)

Vasquez Padilla, Ricardo; Soo Too, Yen Chean; Benito, Regano; McNaughton, Robbie; Stein, Wes

2018-01-01

In this paper, optimisation of the supercritical CO? Brayton cycles integrated with a solar receiver, which provides heat input to the cycle, was performed. Four S-CO? Brayton cycle configurations were analysed and optimum operating conditions were obtained by using a multi-objective thermodynamic optimisation. Four different sets, each including two objective parameters, were considered individually. The individual multi-objective optimisation was performed by using Non-dominated Sorting Genetic Algorithm. The effect of reheating, solar receiver pressure drop and cycle parameters on the overall exergy and cycle thermal efficiency was analysed. The results showed that, for all configurations, the overall exergy efficiency of the solarised systems achieved at maximum value between 700°C and 750°C and the optimum value is adversely affected by the solar receiver pressure drop. In addition, the optimum cycle high pressure was in the range of 24.2-25.9 MPa, depending on the configurations and reheat condition.

A generic methodology for the optimisation of sewer systems using stochastic programming and self-optimizing control.

PubMed

Mauricio-Iglesias, Miguel; Montero-Castro, Ignacio; Mollerup, Ane L; Sin, Gürkan

2015-05-15

The design of sewer system control is a complex task given the large size of the sewer networks, the transient dynamics of the water flow and the stochastic nature of rainfall. This contribution presents a generic methodology for the design of a self-optimising controller in sewer systems. Such controller is aimed at keeping the system close to the optimal performance, thanks to an optimal selection of controlled variables. The definition of an optimal performance was carried out by a two-stage optimisation (stochastic and deterministic) to take into account both the overflow during the current rain event as well as the expected overflow given the probability of a future rain event. The methodology is successfully applied to design an optimising control strategy for a subcatchment area in Copenhagen. The results are promising and expected to contribute to the advance of the operation and control problem of sewer systems. Copyright © 2015 Elsevier Ltd. All rights reserved.

Optimisation robuste des aeronefs et des groupes turboreacteurs

NASA Astrophysics Data System (ADS)

Couturier, Philippe

Future aircraft and powerplant designs will need to meet and perhaps anticipate increasingly demanding operational constraints. This progressive evolution in design requirements is already at work and arises from the combined impacts of increasingly stringent environmental norms with regards to noise and atmospheric emissions, a depletion of fossil fuel reserves which is expected to drive fuel costs upwards, as well as a steady increase in air traffic. In order to adapt to these market shifts, aircraft and powerplant companies will need to explore the potential range of benefits and risks associated with a wide spectrum of new designs and technologies. At the same time, it will be necessary to ensure that the resulting end products provide cost effective solutions when operated in the economic environment foreseen for the next generation of aircrafts. The objective of this study is to develop a methodology which enables the selection of optimal robust designs at the preliminary design stage as well as to quantify the compromise between a robust design and a potential gain in performance. The developed methodology is used in the design of a seventy passenger aircraft in order to determine the effects of uncertainty. The methodology seeks to optimize the design while attenuating its sensitivity to uncertainties. The goal is to reduce the likelihood of costly concept reformulations in the later stages of the product development process. A design platform was developed to enable the study at a conceptual level of aircraft and engine performance. It comprises four modules namely: the aircraft design and performance software Pacelab APD, a metamodel constructed with the software GasTurb to calculate engine performance, a module to predict the noise level, and a module to determine the operating costs. The last two modules were constructed using data from the literature. The effects related to two types of uncertainties present at the preliminary design stage were analyzed. These are uncertainties related to the market forecast for when the next generation of aircrafts will be in service as well as uncertainties of the level of fidelity of the models used. Based on predictions for future oil costs, the research found that an aircraft built for a similar cruising speed as today's jet aircrafts will minimize the mean of the predicted operating cost by having a configuration that minimizes fuel consumption. Conversely, it has been determined that fuel cost does not affect the design optimized to minimize the mean of the predicted operating costs when the cruise Mach number is variable. Furthermore, the use of Pareto fronts in order to quantify the compromise between a robust design and a potential gain in performance showed that the design variables have little influence on the sensitivity of the operating cost subject to model uncertainties. It has also been determined that neglecting uncertainties during the design process can lead to the selection of a configuration with a high risk of not satisfying the constraints.

Operating boundaries of full-scale advanced water reuse treatment plants: many lessons learned from pilot plant experience.

PubMed

Bele, C; Kumar, Y; Walker, T; Poussade, Y; Zavlanos, V

2010-01-01

Three Advanced Water Treatment Plants (AWTP) have recently been built in South East Queensland as part of the Western Corridor Recycled Water Project (WCRWP) producing Purified Recycled Water from secondary treated waste water for the purpose of indirect potable reuse. At Luggage Point, a demonstration plant was primarily operated by the design team for design verification. The investigation program was then extended so that the operating team could investigate possible process optimisation, and operation flexibility. Extending the demonstration plant investigation program enabled monitoring of the long term performance of the microfiltration and reverse osmosis membranes, which did not appear to foul even after more than a year of operation. The investigation primarily identified several ways to optimise the process. It highlighted areas of risk for treated water quality, such as total nitrogen. Ample and rapid swings of salinity from 850 to 3,000 mg/l-TDS were predicted to affect the RO process day-to-day operation and monitoring. Most of the setpoints used for monitoring under HACCP were determined during the pilot plant trials.

The role of predictive uncertainty in the operational management of reservoirs

NASA Astrophysics Data System (ADS)

Todini, E.

2014-09-01

The present work deals with the operational management of multi-purpose reservoirs, whose optimisation-based rules are derived, in the planning phase, via deterministic (linear and nonlinear programming, dynamic programming, etc.) or via stochastic (generally stochastic dynamic programming) approaches. In operation, the resulting deterministic or stochastic optimised operating rules are then triggered based on inflow predictions. In order to fully benefit from predictions, one must avoid using them as direct inputs to the reservoirs, but rather assess the "predictive knowledge" in terms of a predictive probability density to be operationally used in the decision making process for the estimation of expected benefits and/or expected losses. Using a theoretical and extremely simplified case, it will be shown why directly using model forecasts instead of the full predictive density leads to less robust reservoir management decisions. Moreover, the effectiveness and the tangible benefits for using the entire predictive probability density instead of the model predicted values will be demonstrated on the basis of the Lake Como management system, operational since 1997, as well as on the basis of a case study on the lake of Aswan.

INCOMMANDS TDP: Development of Decision Aid Implementation Guidance for the INCOMMANDS Human Factors Design and Evaluation Guide (Elaboration des Directives Relatives a la Mise en Oeuvre de l’Aide a la Decision Pour le Guide de Conception et d’evaluation Tenant Compte des Facteurs Humains - INCOMMANDS)

DTIC Science & Technology

2007-05-01

information. Aviation Human-Computer Interface (AHCI) Style Guide. (1998). Report Number 64201-97U/61223. Prepared by Veridian, Veda Operations The...Prepared by Veridian, Veda Operations. Banbury, S., Dudfield, H. Hoermann, H. J., and Soll, H. (in press). FASA: Development and validation of a scale

Psychological and Physiological Selection of Military Special Operations Forces Personnel (Selection psychologique et physiologique des militaires des forces d’operations speciales)

DTIC Science & Technology

2012-10-01

in the selection literature today is the Five Factor Model ( FFM ) or “Big 5” model of personality. This model includes: 1) Openness; 2...Conscientiousness; 3) Extraversion; 4) Agreeableness; and 5) Emotional Stability. Meta-analytic studies have found the FFM of personality to be predictive...is a self-report measure of the FFM that has demonstrated reliability and validity in numerous studies [18]. Another FFM measure, the Trait Self

Operational Colour Vision in the Modern Aviation Environment (la Vision des couleurs dans l’environnement aeronautique operationnel d’ aujourd hui)

DTIC Science & Technology

2001-03-01

detection or use by special forces in air-sea rescue operations. It is not the case that colour vision is improved and the use of the devices should be...situation. The tests were developed by clinicians for detecting pathologies. Only rarely do they bear any close relation to the tasks actually...examination procedures will certainly emerge, helped by microcomputing, the use of databases and, why not, Internet? iii la Vision des couleurs dans

Flight in Adverse Environmental Condition

DTIC Science & Technology

1989-01-01

congruence among many accident studies that indicates that the flight crews have the opportunity to prevent 60-70% of all accidents 13]. Pigure 2 shows a...fully wendful of our duty ot car* and with thu roaliuAtion hm the undortndtng anA Xnaledgo gained vll not bo useful unl(ss the operational ayAtom can ex ...des donnles. Hls de cc ol tai les soutteent des mnimes ditauts Qua 13 tot-tle do PRtATT. En consiquence. 11 taut geot I lespnit quc !a description des

Canadian Forces Education and Training for Interagency Operational Contexts (Education et Instruction des Forces Canadiennes Pour les Contextes Operationnels Interorganisationnels)

DTIC Science & Technology

2009-11-01

organismes gouvernementaux dans le processus de planification opérationnelle (PPO) des FC. Le rapport se termine par des recommandations de travaux...B.D., THOMSON, M.H., BROWN, A.L., SARTORI, J.A., TAYLOR, T.E., WALDHERR, S.U. 2008. Organizational trust in the Canadian Forces. DRDC T No. CR2008...enablers for distributed team collaboration. DRDC T No. CR2007-137. Toronto, ON: Defence Research and Development Canada. FUGLESTAD, P.T., SNYDER

Caracterisation des proprietes dielectriques de materiaux composites a base de polyethylene terephtalate recycle =

NASA Astrophysics Data System (ADS)

Mebarki, Fouzia

Cette etude vise a etudier la possibilite d'utiliser des materiaux composites a matrice thermoplastique pour des applications electriques comme les supports des systemes d'allumage dans les moteurs d'automobile. Nous nous interessons plus particulierement aux composites a base de polyethylene terephtalate (PET) recycle. Les isolants classiques comme le PET ne peuvent pas satisfaire toutes les exigences. L'introduction des renforts comme les fibres de verre et le mica peuvent ameliorer les caracteristiques mecaniques de ces materiaux. Toutefois, cette amelioration peut etre accompagnee d'une diminution des proprietes electriques surtout que ces materiaux doivent operer sous contraintes thermiques et electriques tres severes. Afin d'estimer la duree de vie de ces isolants, des essais de vieillissement accelere ont ete effectues a une frequence de 300Hz dans une plage de temperature allant de la temperature ambiante a 140°C. L'etude a haute temperature permettra de determiner la temperature de service des materiaux candidats. Des essais de la rupture dielectrique ont ete realises sur un grand nombre d'echantillon selon la norme ASTM D-149 relative aux mesures de rigidite dielectrique des isolants solides. Ces tests ont permis de deceler les echantillons problematiques et de verifier la qualite de ces isolants solides. Les differentes connaissances acquises lors de cette analyse ont servi a predire les performances des materiaux en service et vont permettre a la compagnie Groupe Lavergne d'apporter des ameliorations au niveau des formulations existantes et par la suite developper un materiau ayant les proprietes electriques et thermiques adequates pour ce type d'application. None None None None

Developpement d'une commande pour une hydrolienne de riviere et optimisation =

NASA Astrophysics Data System (ADS)

Tetrault, Philippe

Suivant le developpement des energies renouvelables, la presente etude se veut une base theorique quant aux principes fondamentaux necessaires au bon fonctionnement et a l'implementation d'une hydrolienne de riviere. La problematique derriere ce nouveau type d'appareil est d'abord presentee. La machine electrique utilisee dans l'application, c'est-a-dire la machine synchrone a aimants permanents, est etudiee : ses equations dynamiques mecaniques et electriques sont developpees, introduisant en meme temps le concept de referentiel tournant. Le fonctionnement de l'onduleur utilise, soit un montage en pont complet a deux niveaux a semi-conducteurs, est explique et mit en equation pour permettre de comprendre les strategies de modulation disponibles. Un bref historique de ces strategies est fait avant de mettre l'emphase sur la modulation vectorielle qui sera celle utilisee pour l'application en cours. Les differents modules sont assembles dans une simulation Matlab pour confirmer leur bon fonctionnement et comparer les resultats de la simulation avec les calculs theoriques. Differents algorithmes permettant de traquer et maintenir un point de fonctionnement optimal sont presentes. Le comportement de la riviere est etudie afin d'evaluer l'ampleur des perturbations que le systeme devra gerer. Finalement, une nouvelle approche est presentee et comparee a une strategie plus conservatrice a l'aide d'un autre modele de simulation Matlab.

Impact de la preparation des anodes crues et des conditions de cuisson sur la fissuration dans des anodes denses

NASA Astrophysics Data System (ADS)

Amrani, Salah

La fabrication de l'aluminium est realisee dans une cellule d'electrolyse, et cette operation utilise des anodes en carbone. L'evaluation de la qualite de ces anodes reste indispensable avant leur utilisation. La presence des fissures dans les anodes provoque une perturbation du procede l'electrolyse et une diminution de sa performance. Ce projet a ete entrepris pour determiner l'impact des differents parametres de procedes de fabrication des anodes sur la fissuration des anodes denses. Ces parametres incluent ceux de la fabrication des anodes crues, des proprietes des matieres premieres et de la cuisson. Une recherche bibliographique a ete effectuee sur tous les aspects de la fissuration des anodes en carbone pour compiler les travaux anterieurs. Une methodologie detaillee a ete mise au point pour faciliter le deroulement des travaux et atteindre les objectifs vises. La majorite de ce document est reservee pour la discussion des resultats obtenus au laboratoire de l'UQAC et au niveau industriel. Concernant les etudes realisees a l'UQAC, une partie des travaux experimentaux est reservee a la recherche des differents mecanismes de fissuration dans les anodes denses utilisees dans l'industrie d'aluminium. L'approche etait d'abord basee sur la caracterisation qualitative du mecanisme de la fissuration en surface et en profondeur. Puis, une caracterisation quantitative a ete realisee pour la determination de la distribution de la largeur de la fissure sur toute sa longueur, ainsi que le pourcentage de sa surface par rapport a la surface totale de l'echantillon. Cette etude a ete realisee par le biais de la technique d'analyse d'image utilisee pour caracteriser la fissuration d'un echantillon d'anode cuite. L'analyse surfacique et en profondeur de cet echantillon a permis de voir clairement la formation des fissures sur une grande partie de la surface analysee. L'autre partie des travaux est basee sur la caracterisation des defauts dans des echantillons d'anodes crues fabriquees industriellement. Cette technique a consiste a determiner le profil des differentes proprietes physiques. En effet, la methode basee sur la mesure de la distribution de la resistivite electrique sur la totalite de l'echantillon est la technique qui a ete utilisee pour localiser la fissuration et les macro-pores. La microscopie optique et l'analyse d'image ont, quant a elles, permis de caracteriser les zones fissurees tout en determinant la structure des echantillons analyses a l'echelle microscopique. D'autres tests ont ete menes, et ils ont consiste a etudier des echantillons cylindriques d'anodes de 50 mm de diametre et de 130 mm de longueur. Ces derniers ont ete cuits dans un four a UQAC a differents taux de chauffage dans le but de pouvoir determiner l'influence des parametres de cuisson sur la formation de la fissuration dans ce genre de carottes. La caracterisation des echantillons d'anodes cuites a ete faite a l'aide de la microscopie electronique a balayage et de l'ultrason. La derniere partie des travaux realises a l'UQAC contient une etude sur la caracterisation des anodes fabriquees au laboratoire sous differentes conditions d'operation. L'evolution de la qualite de ces anodes a ete faite par l'utilisation de plusieurs techniques. L'evolution de la temperature de refroidissement des anodes crues de laboratoire a ete mesuree; et un modele mathematique a ete developpe et valide avec les donnees experimentales. Cela a pour objectif d'estimer la vitesse de refroidissement ainsi que le stress thermique. Toutes les anodes fabriquees ont ete caracterisees avant la cuisson par la determination de certaines proprietes physiques (resistivite electrique, densite apparente, densite optique et pourcentage de defauts). La tomographie et la distribution de la resistivite electrique, qui sont des techniques non destructives, ont ete employees pour evaluer les defauts internes des anodes. Pendant la cuisson des anodes de laboratoire, l'evolution de la resistivite electrique a ete suivie et l'etape de devolatilisation a ete identifiee. Certaines anodes ont ete cuites a differents taux de chauffage (bas, moyen, eleve et un autre combine) dans l'objectif de trouver les meilleures conditions de cuisson en vue de minimiser la fissuration. D'autres anodes ont ete cuites a differents niveaux de cuisson, cela dans le but d'identifier a quelle etape de l'operation de cuisson la fissuration commence a se developper. Apres la cuisson, les anodes ont ete recuperees pour, a nouveau, faire leur caracterisation par les memes techniques utilisees precedemment. L'objectif principal de cette partie etait de reveler l'impact de differents parametres sur le probleme de fissuration, qui sont repartis sur toute la chaine de production des anodes. Le pourcentage de megots, la quantite de brai et la distribution des particules sont des facteurs importants a considerer pour etudier l'effet de la matiere premiere sur le probleme de la fissuration. Concernant l'effet des parametres du procede de fabrication sur le meme probleme, le temps de vibration, la pression de compaction et le procede de refroidissement ont ete a la base de cette etude. Finalement, l'influence de la phase de cuisson sur l'apparition de la fissuration a ete prise en consideration par l'intermediaire du taux de chauffage et du niveau de cuisson. Les travaux realises au niveau industriel ont ete faits lors d'une campagne de mesure dans le but d'evaluer la qualite des anodes de carbone en general et l'investigation du probleme de fissuration en particulier. Ensuite, il s'agissait de reveler les effets de differents parametres sur le probleme de la fissuration. Vingt-quatre anodes cuites ont ete utilisees. Elles ont ete fabriquees avec differentes matieres premieres (brai, coke, megots) et sous diverses conditions (pression, temps de vibration). Le parametre de la densite de fissuration a ete calcule en se basant sur l'inspection visuelle de la fissuration des carottes. Cela permet de classifier les differentes fissurations en plusieurs categories en se basant sur certains criteres tels que le type de fissures (horizontale, verticale et inclinee), leurs localisations longitudinales (bas, milieu et haut de l'anode) et transversales (gauche, centrale et droite). Les effets de la matiere premiere, les parametres de fabrication des anodes crues ainsi que les conditions de cuisson sur la fissuration ont ete etudies. La fissuration des anodes denses en carbones cause un serieux probleme pour l'industrie d'aluminium primaire. La realisation de ce projet a permis la revelation de differents mecanismes de fissuration, la classification de fissuration par plusieurs criteres (position, types localisation) et l'evaluation de l'impact de differents parametres sur la fissuration. Les etudes effectuees dans le domaine de cuisson ont donne la possibilite d'ameliorer l'operation et reduire la fissuration des anodes. Le travail consiste aussi a identifier des techniques capables d'evaluer la qualite d'anodes (l'ultrason, la tomographie et la distribution de la resistivite electrique). La fissuration des anodes en carbone est consideree comme un probleme complexe, car son apparition depend de plusieurs parametres repartis sur toute la chaine de production. Dans ce projet, plusieurs nouvelles etudes ont ete realisees, et elles permettent de donner de l'originalite aux travaux de recherches faits dans le domaine de la fissuration des anodes de carbone pour l'industrie de l'aluminium primaire. Les etudes realisees dans ce projet permettent d'ajouter d'un cote, une valeur scientifique pour mieux comprendre le probleme de fissuration des anodes et d'un autre cote, d'essayer de proposer des methodes qui peuvent reduire ce probleme a l'echelle industrielle.

Low power test architecture for dynamic read destructive fault detection in SRAM

NASA Astrophysics Data System (ADS)

Takher, Vikram Singh; Choudhary, Rahul Raj

2018-06-01

Dynamic Read Destructive Fault (dRDF) is the outcome of resistive open defects in the core cells of static random-access memories (SRAMs). The sensitisation of dRDF involves either performing multiple read operations or creation of number of read equivalent stress (RES), on the core cell under test. Though the creation of RES is preferred over the performing multiple read operation on the core cell, cell dissipates more power during RES than during the read or write operation. This paper focuses on the reduction in power dissipation by optimisation of number of RESs, which are required to sensitise the dRDF during test mode of operation of SRAM. The novel pre-charge architecture has been proposed in order to reduce the power dissipation by limiting the number of RESs to an optimised number of two. The proposed low power architecture is simulated and analysed which shows reduction in power dissipation by reducing the number of RESs up to 18.18%.

Acoustic Resonator Optimisation for Airborne Particle Manipulation

NASA Astrophysics Data System (ADS)

Devendran, Citsabehsan; Billson, Duncan R.; Hutchins, David A.; Alan, Tuncay; Neild, Adrian

Advances in micro-electromechanical systems (MEMS) technology and biomedical research necessitate micro-machined manipulators to capture, handle and position delicate micron-sized particles. To this end, a parallel plate acoustic resonator system has been investigated for the purposes of manipulation and entrapment of micron sized particles in air. Numerical and finite element modelling was performed to optimise the design of the layered acoustic resonator. To obtain an optimised resonator design, careful considerations of the effect of thickness and material properties are required. Furthermore, the effect of acoustic attenuation which is dependent on frequency is also considered within this study, leading to an optimum operational frequency range. Finally, experimental results demonstrated good particle levitation and capture of various particle properties and sizes ranging to as small as 14.8 μm.

Discrete Event Supervisory Control Applied to Propulsion Systems

NASA Technical Reports Server (NTRS)

Litt, Jonathan S.; Shah, Neerav

2005-01-01

The theory of discrete event supervisory (DES) control was applied to the optimal control of a twin-engine aircraft propulsion system and demonstrated in a simulation. The supervisory control, which is implemented as a finite-state automaton, oversees the behavior of a system and manages it in such a way that it maximizes a performance criterion, similar to a traditional optimal control problem. DES controllers can be nested such that a high-level controller supervises multiple lower level controllers. This structure can be expanded to control huge, complex systems, providing optimal performance and increasing autonomy with each additional level. The DES control strategy for propulsion systems was validated using a distributed testbed consisting of multiple computers--each representing a module of the overall propulsion system--to simulate real-time hardware-in-the-loop testing. In the first experiment, DES control was applied to the operation of a nonlinear simulation of a turbofan engine (running in closed loop using its own feedback controller) to minimize engine structural damage caused by a combination of thermal and structural loads. This enables increased on-wing time for the engine through better management of the engine-component life usage. Thus, the engine-level DES acts as a life-extending controller through its interaction with and manipulation of the engine s operation.

Palm ethyl ester purification by using Choline Chloride - 1,2 propanediol as deep eutectic solvent

NASA Astrophysics Data System (ADS)

Manurung, R.; Alhamdi, M. A.; Syahputra, A.

2018-02-01

Deep eutectic solvent (DES) has gained more attention for using in biodiesel production because of environmental benefits and process improvements. This study was aimed to test the potency and effectiveness of Deep Eutectic Solvent (DES) based choline chloride: 1.2-propanediol as co-solvent in biodiesel purification. The method used in preparing DES synthesis process was conducted by mixing choline chloride: 1.2-propanediol with mole ratio variation such as: 1:2 ; 1:2.5 ; 1:3 ; and 1:3.5 (mole/mole). The temperature of DES synthesis was at 80 °C with 300 rpm stirring speed for 60 minutes. Variation of DES concentration base on percentage palm oil used: 1, 3, and 5 %. DES possible to increase the ethyl ester yield of biodiesel in the purification process. The best result of yield was 89.95% with the 9:1 molar ratio ethanol: oil and 5% of DES. The operation condition was at 70 °C of temperature reaction, 400 rpm of stirring speed, and 90 minutes of reaction time.

Realisation de composants tout-fibre passifs bases sur des fibres optiques a deux coeurs

NASA Astrophysics Data System (ADS)

Jacob Poulin, Anne C.

2002-01-01

Les composants passifs tout-optique sont des elements de choix dans les systemes de communications optiques. Cette these presente l'utilisation experimentale de fibres a deux coeurs dissimilaires pour la realisation de filtres passe-bande. Les fibres a deux coeurs ont la particularite de favoriser un couplage d'un coeur a l'autre a intervalles reguliers lorsque les coeurs sont exactement identiques. Dans le cas ou une legere difference apparait, ce couplage est rapidement reduit a zero. La premiere partie de la these montre comment, par l'emploi d'une geometrie de fibre appropriee, il est possible de compenser cette desyntonisation et de fabriquer des coupleurs 100%. Les filtres obtenus ayant toutefois une largeur de bande trop grande pour les besoins du marche des communications optiques, il est montre dans la deuxieme partie de la these comment, en alliant la technologie des reseaux de Bragg avec celle des coupleurs, il est possible de realiser des filtres operant en transmission et possedant d'excellentes caracteristiques spectrales, toujours avec ces memes fibres a deux coeurs.

L’alimentation des enfants ayant une déficience neurologique

PubMed Central

2009-01-01

La malnutrition, qu’il s’agisse de sous-alimentation ou de suralimentation, est courante chez les enfants ayant une déficience neurologique. Les besoins en énergie sont difficiles à définir au sein de cette population hétérogène. De plus, on manque d’information sur ce qui constitue la croissance normale chez ces enfants. Des facteurs non nutritionnels peuvent influer sur la croissance, mais des facteurs nutritionnels, tels qu’un apport calorique insuffisant, des pertes excessives d’éléments nutritifs et un métabolisme énergétique anormal, contribuent également au retard de croissance de ces enfants. La malnutrition est liée à une importante morbidité, tandis que la réadaptation nutritionnelle améliore l’état de santé global. Le soutien nutritionnel doit faire partie intégrante de la prise en charge des enfants ayant une déficience nutritionnelle et viser non seulement à améliorer l’état nutritionnel, mais également la qualité de vie des patients et de leur famille. Au moment d’envisager une intervention nutritionnelle, il faut tenir compte du dysfonctionnement oromoteur, du reflux gastro-œsophagien et de l’aspiration pulmonaire, et une équipe multidisciplinaire doit se concerter. Il faut repérer rapidement les enfants vulnérables à des troubles nutritionnels et procéder à une évaluation de leur état nutritionnel au moins une fois par année, et plus souvent chez les nourrissons et les jeunes enfants ou chez les enfants qui risquent de souffrir de malnutrition. Il faut optimiser l’apport oral s’il est sécuritaire, mais entreprendre une alimentation entérale chez les enfants ayant un dysfonctionnement oromoteur qui provoque une aspiration marquée ou chez ceux qui sont incapables de maintenir un état nutritionnel suffisant au moyen de l’apport oral. Il faut réserver l’alimentation par sonde nasogastrique aux interventions à court terme, mais si une intervention nutritionnelle prolongée s’impose, il faut envisager la gastrostomie. Il faut réserver les mesures antireflux aux enfants présentant un reflux gastro-œsophagien considérable. Il faut surveiller étroitement la réponse du patient à l’intervention nutritionnelle afin d’éviter une prise de poids excessive après l’amorce de l’alimentation entérale, et privilégier les préparations pédiatriques afin d’éviter les carences en micronutriments. PMID:20592968

Technique distribuee de gestion de la charge sur le reseau electrique et ring-tree: Un nouveau systeme de communication P2P

NASA Astrophysics Data System (ADS)

Ayoub, Simon

Le reseau de distribution et de transport de l'electricite se modernise dans plusieurs pays dont le Canada. La nouvelle generation de ce reseau que l'on appelle smart grid, permet entre autre l'automatisation de la production, de la distribution et de la gestion de la charge chez les clients. D'un autre cote, des appareils domestiques intelligents munis d'une interface de communication pour des applications du smart grid commencent a apparaitre sur le marche. Ces appareils intelligents pourraient creer une communaute virtuelle pour optimiser leurs consommations d'une facon distribuee. La gestion distribuee de ces charges intelligentes necessite la communication entre un grand nombre d'equipements electriques. Ceci represente un defi important a relever surtout si on ne veut pas augmenter le cout de l'infrastructure et de la maintenance. Lors de cette these deux systemes distincts ont ete concus : un systeme de communication peer-to-peer, appele Ring-Tree, permettant la communication entre un nombre important de noeuds (jusqu'a de l'ordre de grandeur du million) tel que des appareils electriques communicants et une technique distribuee de gestion de la charge sur le reseau electrique. Le systeme de communication Ring-Tree inclut une nouvelle topologie reseau qui n'a jamais ete definie ou exploitee auparavant. Il inclut egalement des algorithmes pour la creation, l'exploitation et la maintenance de ce reseau. Il est suffisamment simple pour etre mis en oeuvre sur des controleurs associes aux dispositifs tels que des chauffe-eaux, chauffage a accumulation, bornes de recharges electriques, etc. Il n'utilise pas un serveur centralise (ou tres peu, seulement lorsqu'un noeud veut rejoindre le reseau). Il offre une solution distribuee qui peut etre mise en oeuvre sans deploiement d'une infrastructure autre que les controleurs sur les dispositifs vises. Finalement, un temps de reponse de quelques secondes pour atteindre 1'ensemble du reseau peut etre obtenu, ce qui est suffisant pour les besoins des applications visees. Les protocoles de communication s'appuient sur un protocole de transport qui peut etre un de ceux utilises sur l'Internet comme TCP ou UDP. Pour valider le fonctionnement de de la technique de controle distribuee et le systeme de communiction Ring-Tree, un simulateur a ete developpe; un modele de chauffe-eau, comme exemple de charge, a ete integre au simulateur. La simulation d'une communaute de chauffe-eaux intelligents a montre que la technique de gestion de la charge combinee avec du stockage d'energie sous forme thermique permet d'obtenir, sans affecter le confort de l'utilisateur, des profils de consommation varies dont un profil de consommation uniforme qui represente un facteur de charge de 100%. Mots-cles : Algorithme Distribue, Demand Response, Gestion de la Charge Electrique, M2M (Machine-to-Machine), P2P (Peer-to-Peer), Reseau Electrique Intelligent, Ring-Tree, Smart Grid

Fibrose kystique atypique

PubMed Central

Schram, Carrie A.

2012-01-01

Résumé Objectif Passer en revue le diagnostic des patients atteints de fibrose kystique (FK) atypique. Sources des données On a procédé à une recension exhaustive dans MEDLINE (de 1950 à la troisième semaine de mai 2009), dans MEDLINE In-Process and Other Non-Indexed Citations and Cases (de 1950 à la troisième semaine de 2009) et dans EMBASE (de 1980 à la quatrième semaine de mars 2009). On a aussi passé en revue le site web de Fibrose kystique Canada et on a consulté son plus récent rapport des inscriptions de données sur les patients. Message principal La FK atypique est une forme moins intense du trouble de la FK, qui est associée à des mutations du gène régulateur de la conductance transmembranaire de la fibrose kystique. Au lieu d’avoir les symptômes classiques, les personnes atteintes d’une FK atypique pourraient avoir une légère dysfonction d’un seul système organique et avoir ou non des concentrations de chlorure élevées dans la sueur. La FK atypique est un trouble très diversifié affectant différents systèmes organiques à divers degrés. Les symptômes du patient peuvent aussi fluctuer avec le temps; par ailleurs, certains signes et symptômes cliniques touchant les systèmes respiratoire, gastro-intestinal, endocrinien et métabolique et génito-urinaire devraient signaler aux médecins la possibilité d’une FK. Les patients atteints d’une FK atypique ont moins d’hospitalisations durant l’enfance que ceux qui ont une FK classique et le diagnostic peut passer inaperçu pendant de nombreuses années, parfois même jusqu’à l’âge adulte. Conclusion Même si les patients atteints d’une FK atypique ont une espérance de vie plus longue que les personnes atteintes de la forme classique, les issues à long terme pour de nombreuses personnes qui ont la forme atypique sont inconnues. Il est important de conseiller les patients à propos de la possibilité d’une manifestation future de la maladie. Renseigner les patients à propos de la FK peut les aider à comprendre leurs symptômes, à modifier leur mode de vie pour optimiser leur santé, à réduire l’incidence des complications et à recevoir au besoin du counseling sur la planification familiale.

A short-term study investigating the estrogenic potency of diethylstilbesterol in the fathead minnow (Pimephales promelas)

EPA Science Inventory

Diethylstilbestrol (DES) is a synthetic estrogen that has been banned for use in humans, but still is employed in livestock and aquaculture operations in some parts of the world. Detectable concentrations of DES in effluent and surface waters have been reported to range from slig...

Dual ant colony operational modal analysis parameter estimation method

NASA Astrophysics Data System (ADS)

Sitarz, Piotr; Powałka, Bartosz

2018-01-01

Operational Modal Analysis (OMA) is a common technique used to examine the dynamic properties of a system. Contrary to experimental modal analysis, the input signal is generated in object ambient environment. Operational modal analysis mainly aims at determining the number of pole pairs and at estimating modal parameters. Many methods are used for parameter identification. Some methods operate in time while others in frequency domain. The former use correlation functions, the latter - spectral density functions. However, while some methods require the user to select poles from a stabilisation diagram, others try to automate the selection process. Dual ant colony operational modal analysis parameter estimation method (DAC-OMA) presents a new approach to the problem, avoiding issues involved in the stabilisation diagram. The presented algorithm is fully automated. It uses deterministic methods to define the interval of estimated parameters, thus reducing the problem to optimisation task which is conducted with dedicated software based on ant colony optimisation algorithm. The combination of deterministic methods restricting parameter intervals and artificial intelligence yields very good results, also for closely spaced modes and significantly varied mode shapes within one measurement point.

Robustness analysis of bogie suspension components Pareto optimised values

NASA Astrophysics Data System (ADS)

Mousavi Bideleh, Seyed Milad

2017-08-01

Bogie suspension system of high speed trains can significantly affect vehicle performance. Multiobjective optimisation problems are often formulated and solved to find the Pareto optimised values of the suspension components and improve cost efficiency in railway operations from different perspectives. Uncertainties in the design parameters of suspension system can negatively influence the dynamics behaviour of railway vehicles. In this regard, robustness analysis of a bogie dynamics response with respect to uncertainties in the suspension design parameters is considered. A one-car railway vehicle model with 50 degrees of freedom and wear/comfort Pareto optimised values of bogie suspension components is chosen for the analysis. Longitudinal and lateral primary stiffnesses, longitudinal and vertical secondary stiffnesses, as well as yaw damping are considered as five design parameters. The effects of parameter uncertainties on wear, ride comfort, track shift force, stability, and risk of derailment are studied by varying the design parameters around their respective Pareto optimised values according to a lognormal distribution with different coefficient of variations (COVs). The robustness analysis is carried out based on the maximum entropy concept. The multiplicative dimensional reduction method is utilised to simplify the calculation of fractional moments and improve the computational efficiency. The results showed that the dynamics response of the vehicle with wear/comfort Pareto optimised values of bogie suspension is robust against uncertainties in the design parameters and the probability of failure is small for parameter uncertainties with COV up to 0.1.

Topology optimisation of micro fluidic mixers considering fluid-structure interactions with a coupled Lattice Boltzmann algorithm

NASA Astrophysics Data System (ADS)

Munk, David J.; Kipouros, Timoleon; Vio, Gareth A.; Steven, Grant P.; Parks, Geoffrey T.

2017-11-01

Recently, the study of micro fluidic devices has gained much interest in various fields from biology to engineering. In the constant development cycle, the need to optimise the topology of the interior of these devices, where there are two or more optimality criteria, is always present. In this work, twin physical situations, whereby optimal fluid mixing in the form of vorticity maximisation is accompanied by the requirement that the casing in which the mixing takes place has the best structural performance in terms of the greatest specific stiffness, are considered. In the steady state of mixing this also means that the stresses in the casing are as uniform as possible, thus giving a desired operating life with minimum weight. The ultimate aim of this research is to couple two key disciplines, fluids and structures, into a topology optimisation framework, which shows fast convergence for multidisciplinary optimisation problems. This is achieved by developing a bi-directional evolutionary structural optimisation algorithm that is directly coupled to the Lattice Boltzmann method, used for simulating the flow in the micro fluidic device, for the objectives of minimum compliance and maximum vorticity. The needs for the exploration of larger design spaces and to produce innovative designs make meta-heuristic algorithms, such as genetic algorithms, particle swarms and Tabu Searches, less efficient for this task. The multidisciplinary topology optimisation framework presented in this article is shown to increase the stiffness of the structure from the datum case and produce physically acceptable designs. Furthermore, the topology optimisation method outperforms a Tabu Search algorithm in designing the baffle to maximise the mixing of the two fluids.

Preparing and Training for the Full Spectrum of Military Challenges. Insights from the Experiences of China, France, the United Kingdom, India, and Israel

DTIC Science & Technology

2009-01-01

CPCO Centre de Planification et de Conduite des Opérations CPF Centre de Préparation des Forces CPX command post exercise CT collective training CTC...forces presides over the joint staff and commands French forces in the conduct of operations through the Centre de Planification et de Conduite des...i] t is difficult to identify a single concise statement of the government’s foreign policy.”17 The committee instead pointed to the mission state

NATO Glossary of Abbreviations Used in NATO Documents and Publications (Glossaire OTAN des Abreviations Utilisees dans les Documents et Publications OTAN)

DTIC Science & Technology

2007-01-01

07.2005 ATP-44(C) Electronic Warfare (EW) in Air Operations La guerre électronique dans les opérations aériennes 04.2000 ATP-45(C) Reporting Nuclear ...15.04.2002 AAP-15 (2007) A - 7 ORIGINAL MC 0343/1 NATO Military Assistance to International Disaster Relief Operations (IDRO) Assistance militaire de...risques radiologiques dans le cadre des opérations de maintien de la paix 02.08.1996 ACT Dir 72-2L Chemical, Biological, Radiological, and Nuclear (CBRN

AllAboard: Visual Exploration of Cellphone Mobility Data to Optimise Public Transport.

PubMed

Di Lorenzo, G; Sbodio, M; Calabrese, F; Berlingerio, M; Pinelli, F; Nair, R

2016-02-01

The deep penetration of mobile phones offers cities the ability to opportunistically monitor citizens' mobility and use data-driven insights to better plan and manage services. With large scale data on mobility patterns, operators can move away from the costly, mostly survey based, transportation planning processes, to a more data-centric view, that places the instrumented user at the center of development. In this framework, using mobile phone data to perform transit analysis and optimization represents a new frontier with significant societal impact, especially in developing countries. In this paper we present AllAboard, an intelligent tool that analyses cellphone data to help city authorities in visually exploring urban mobility and optimizing public transport. This is performed within a self contained tool, as opposed to the current solutions which rely on a combination of several distinct tools for analysis, reporting, optimisation and planning. An interactive user interface allows transit operators to visually explore the travel demand in both space and time, correlate it with the transit network, and evaluate the quality of service that a transit network provides to the citizens at very fine grain. Operators can visually test scenarios for transit network improvements, and compare the expected impact on the travellers' experience. The system has been tested using real telecommunication data for the city of Abidjan, Ivory Coast, and evaluated from a data mining, optimisation and user prospective.

Hybrid insulation coordination and optimisation for 1 MV operation of pulsed electron accelerator KALI-30GW

DOE Office of Scientific and Technical Information (OSTI.GOV)

Senthil, K.; Mitra, S.; Sandeep, S., E-mail: sentilk@barc.gov.in

In a multi-gigawatt pulsed power system like KALI-30 GW, insulation coordination is required to achieve high voltages ranging from 0.3 MV to 1 MV. At the same time optimisation of the insulation parameters is required to minimize the inductance of the system, so that nanoseconds output can be achieved. The KALI-30GW pulse power system utilizes a combination of Perspex, delrin, epoxy, transformer oil, nitrogen/SF{sub 6} gas and vacuum insulation at its various stages in compressing DC high voltage to a nanoseconds pulse. This paper describes the operation and performance of the system from 400 kV to 1030 kV output voltagemore » pulse and insulation parameters utilized for obtaining peak 1 MV output. (author)« less

76 FR 65609 - Safety Zone, Brandon Road Lock and Dam to Lake Michigan Including Des Plaines River, Chicago...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-24

... Road Lock and Dam to Lake Michigan Including Des Plaines River, Chicago Sanitary and Ship Canal... enforcement of regulation. SUMMARY: The Coast Guard will enforce a segment of the Safety Zone; Brandon Road....S. Army Corps of Engineers' dispersal barrier maintenance operations. During the enforcement period...

Planning for operating room efficiency and faster anesthesia wake-up time in open major upper abdominal surgery.

PubMed

Lai, Hou-Chuan; Chan, Shun-Ming; Lu, Chueng-He; Wong, Chih-Shung; Cherng, Chen-Hwan; Wu, Zhi-Fu

2017-02-01

Reducing anesthesia-controlled time (ACT) may improve operation room (OR) efficiency result from different anesthetic techniques. However, the information about the difference in ACT between desflurane (DES) anesthesia and propofol-based total intravenous anesthesia (TIVA) techniques for open major upper abdominal surgery under general anesthesia (GA) is not available in the literature.This retrospective study uses our hospital database to analyze the ACT of open major upper abdominal surgery without liver resection after either desflurane/fentanyl-based anesthesia or TIVA via target-controlled infusion with fentanyl/propofol from January 2010 to December 2011. The various time intervals including waiting for anesthesia time, anesthesia time, surgical time, extubation time, exit from OR after extubation, total OR time, and postanesthetic care unit (PACU) stay time and percentage of prolonged extubation (≥15 minutes) were compared between these 2 anesthetic techniques.We included data from 343 patients, with 159 patients receiving TIVA and 184 patients receiving DES. The only significant difference is extubation time, TIVA was faster than the DES group (8.5 ± 3.8 vs 9.4 ± 3.7 minutes; P = 0.04). The factors contributed to prolonged extubation were age, gender, body mass index, DES anesthesia, and anesthesia time.In our hospital, propofol-based TIVA by target-controlled infusion provides faster emergence compared with DES anesthesia; however, it did not improve OR efficiency in open major abdominal surgery. Older, male gender, higher body mass index, DES anesthesia, and lengthy anesthesia time were factors that contribute to extubation time.

Deep Eutectic Solvents pretreatment of agro-industrial food waste.

PubMed

Procentese, Alessandra; Raganati, Francesca; Olivieri, Giuseppe; Russo, Maria Elena; Rehmann, Lars; Marzocchella, Antonio

2018-01-01

Waste biomass from agro-food industries are a reliable and readily exploitable resource. From the circular economy point of view, direct residues from these industries exploited for production of fuel/chemicals is a winning issue, because it reduces the environmental/cost impact and improves the eco-sustainability of productions. The present paper reports recent results of deep eutectic solvent (DES) pretreatment on a selected group of the agro-industrial food wastes (AFWs) produced in Europe. In particular, apple residues, potato peels, coffee silverskin, and brewer's spent grains were pretreated with two DESs, (choline chloride-glycerol and choline chloride-ethylene glycol) for fermentable sugar production. Pretreated biomass was enzymatic digested by commercial enzymes to produce fermentable sugars. Operating conditions of the DES pretreatment were changed in wide intervals. The solid to solvent ratio ranged between 1:8 and 1:32, and the temperature between 60 and 150 °C. The DES reaction time was set at 3 h. Optimal operating conditions were: 3 h pretreatment with choline chloride-glycerol at 1:16 biomass to solvent ratio and 115 °C. Moreover, to assess the expected European amount of fermentable sugars from the investigated AFWs, a market analysis was carried out. The overall sugar production was about 217 kt yr -1 , whose main fraction was from the hydrolysis of BSGs pretreated with choline chloride-glycerol DES at the optimal conditions. The reported results boost deep investigation on lignocellulosic biomass using DES. This investigated new class of solvents is easy to prepare, biodegradable and cheaper than ionic liquid. Moreover, they reported good results in terms of sugars' release at mild operating conditions (time, temperature and pressure).

Developpement des betons semi autoplacants a rheologie adaptee pour des infrastructures

NASA Astrophysics Data System (ADS)

Sotomayor Cruz, Cristian Daniel

Au cours des dernières décennies, les infrastructures canadiennes et québécoises comportent plusieurs structures en béton armé présentant des problèmes de durabilité dus aux conditions climatiques sévères, à la mauvaise conception des structures, à la qualité des matériaux, aux types des bétons choisis, aux systèmes de construction ou à l'existence d'événements incontrôlables. En ce qui concerne le choix du béton pour la construction des infrastructures, une vaste gamme de béton divisée en deux principaux types peut être utilisée: le béton conventionnel vibré (BCV) et le béton autoplaçant (BAP). Dans le cas d'un BCV, la consolidation inadéquate par vibration a été un problème récurrent, occasionnant des dommages structuraux. Ceci a conduit à une réduction de la durabilité et à une augmentation du coût d'entretien et de réparation des infrastructures. Rien que l'utilisation d'un BAP a des avantages tels que l'élimination de la vibration, la réduction des coûts de main d'oeuvre et l'amélioration de la qualité des structures, néanmoins, le coût initial d'un BAP par rapport à un BCV ne permet pas encore de généraliser son utilisation dans l'industrie de la construction. Ce mémoire présente la conception d'une nouvelle gamme de béton semi-autoplaçant pour la construction des infrastructures (BSAP-I) exigeant une vibration minimale. Il s'agit de trouver un équilibre optimal entre la rhéologie et le coût initial du nouveau béton pour conférer une bonne performance structurale et économique aux structures. Le programme expérimental établi a premièrement permis d'évaluer la faisabilité d'utilisation des BSAP-I pour la mise en place des piliers d'une infrastructure de pont à Sherbrooke. En plus, l'utilisation d'un plan d'expériences a permis l'évaluation de trois paramètres de formulation sur les propriétés des mélanges de BSAP-I à l'état frais et durci. Finalement, l'évaluation de la performance des BSAP-I optimisés à travers une caractérisation complète des propriétés mécaniques et de la durabilité a été réalisée. A la suite de cette étude, les résultats obtenus nous permettent de conclure que : (1) L'utilisation d'un BSAP-I avec un gros granulat de 5 - 14 mm, des rapports E/L = 0,37 et S/G = 0,52 et une teneur en air de 6 à 9% a été possible en conférant un équilibre optimal fluidité / stabilité à l'état frais, ainsi qu'un niveau de thixotropie adéquate au chantier permettant d'optimiser la conception du coffrage des piliers de pont et de conférer des qualités de surfaces très acceptables de ces infrastructures. (2) La méthode adaptée pour l'essai L-Box contenant 2 barres et une vibration de 5 secondes a permis de bien caractériser la capacité de remplissage d'un BSAP-I. (3) L'utilisation d'un plan factoriel 23 a permis d'obtenir des modèles statistiques fiables, capables de prédire les propriétés rhéologiques à l'état frais et les résistances en compression des BSAP-I avec des dosages en liant entre 370 et 420 kg/m3, des rapports E/L entre 0,34 et 0,40 et S/G entre 0,47 et 0,53. (4) Des mesures de vitesse d'écoulement T40 d'un BSAP-I sont très semblables à celles d'un BAP. En plus, des valeurs T40 montrent une bonne corrélation linéaire avec celles de T400 mesurés dans la boîte L-Box. (5) À la frontière du BAP et du BCV, une bande rhéologique possédant un τ0 entre 30 et 320 Pa et un η entre 10 et 140 Pa.s a été trouvée pour la conception optimale des BSAP-I. (6) Les BSAP-I optimisés ont également conféré une très bonne performance à l'état frais, en permettant maintenir un bon équilibre entre la rhéologie et la stabilité dans le temps, lorsqu'on utilise une énergie de vibration minimale pour amorcer son écoulement. (7) À l'état durci Les BSAP-I ont conféré une bonne performance présentant des résistances mécaniques élevées et des niveaux négligeables de pénétration aux ions chlores, de perte de masse par écaillage et des attaques par le gel/dégel. (8) L'utilisation des ciments combinés possédant de la fumée de silice, du laitier et de la cendre volante ont permis améliorer le comportement rhéologique et minimiser le retrait par séchage des BSAP-I dans le temps. Mots-clés : Béton autoplaçant (BAP), capacité de remplissage, pression hydrostatique, rhéologie, seuil de cisaillement, thixotropie, maniabilité.

La réfrigération des grandes machines supraconductrices

NASA Astrophysics Data System (ADS)

Gistau, Guy

1991-02-01

The large scale superconducting devices which are now in operation for deviation of heavy particles, acceleration of light particles or plasma confinement need very large powers of refrigeration. After a short survewing of the different functions of refrigerators and the special requirements for large units, the paper describes some existing or envisaged cooling systems which have an equivalent cooling power in the range of 5 kW at 4.5 K. Les grands appareils de physique utilisant les supraconducteurs demandent des puissances cryogéniques de plus en plus importantes. Après un examen des fonctions élémentaires assurées par un réfrigérateur liées au cahier des charges spécifique à chaque utilisation, les spécificités des grosses unités de réfrigération (fiabilité, efficacité, flexibilité, automatisme) sont mises en évidence. Les solutions proposées dans plusieurs grands projets nécessitant des puissances froides supérieures à 5 kW à 4,5 K sont discutées.

Human Factors Issues for Controlling Uninhabited Aerial Vehicles: Preliminary Findings in Support of the Canadian Forces Joint Unmanned Aerial Vehicle Surveillance Target Acquisition System Project (Incidence des Facteurs Humains sur le Pilotage des Vehicules Aeriens Telepilotes: Constatations Preliminaires a L’Appui du Projet de Systeme Interarmees D’Acquisition D’Objectif au Moyen de Vehicules Aeriens Telepilotes de Surveillance des Forces Canadiennes)

DTIC Science & Technology

2010-11-01

Misinterpreted communications, crew coordination, rank imbalance or pilot in command and co-pilot syndrome , crew composition, intra-cockpit communication...of sustained operations. They found that MQ-1 Predator crews experienced higher levels of fatigue, emotional exhaustion and burnout relative to 20

Design and optimisation of novel configurations of stormwater constructed wetlands

NASA Astrophysics Data System (ADS)

Kiiza, Christopher

2017-04-01

Constructed wetlands (CWs) are recognised as a cost-effective technology for wastewater treatment. CWs have been deployed and could be retrofitted into existing urban drainage systems to prevent surface water pollution, attenuate floods and act as sources for reusable water. However, there exist numerous criteria for design configuration and operation of CWs. The aim of the study was to examine effects of design and operational variables on performance of CWs. To achieve this, 8 novel designs of vertical flow CWs were continuously operated and monitored (weekly) for 2years. Pollutant removal efficiency in each CW unit was evaluated from physico-chemical analyses of influent and effluent water samples. Hybrid optimised multi-layer perceptron artificial neural networks (MLP ANNs) were applied to simulate treatment efficiency in the CWs. Subsequently, predictive and analytical models were developed for each design unit. Results show models have sound generalisation abilities; with various design configurations and operational variables influencing performance of CWs. Although some design configurations attained faster and higher removal efficiencies than others; all 8 CW designs produced effluents permissible for discharge into watercourses with strict regulatory standards.

Systeme microfluidique d'analyse sanguine en temps reel pour l'imagerie moleculaire chez le petit animal

NASA Astrophysics Data System (ADS)

Convert, Laurence

De nouveaux radiotraceurs sont continuellement développés pour améliorer l'efficacité diagnostique en imagerie moléculaire, principalement en tomographie d'émission par positrons (TEP) et en tomographie d'émission monophotonique (TEM) dans les domaines de l'oncologie, de la cardiologie et de la neurologie. Avant de pouvoir être utilisés chez les humains, ces radiotraceurs doivent être caractérisés chez les petits animaux, principalement les rats et les souris. Pour cela, de nombreux échantillons sanguins doivent être prélevés et analysés (mesure de radioactivité, séparation de plasma, séparation d'espèces chimiques), ce qui représente un défi majeur chez les rongeurs à cause de leur très faible volume sanguin (˜1,4 ml pour une souris). Des solutions fournissant une analyse partielle sont présentées dans la littérature, mais aucune ne permet d'effectuer toutes les opérations dans un même système. Les présents travaux de recherche s'insèrent dans le contexte global d'un projet visant à développer un système microfluidique d'analyse sanguine complète en temps réel pour la caractérisation des nouveaux radiotraceurs TEP et TEM. Un cahier des charges a tout d'abord été établi et a permis de fixer des critères quantitatifs et qualitatifs à respecter pour chacune des fonctions de la puce. La fonction de détection microfluidique a ensuite été développée. Un état de l'art des travaux ayant déjà combiné la microfluidique et la détection de radioactivité a permis de souligner qu'aucune solution existante ne répondait aux critères du projet. Parmi les différentes technologies disponibles, des microcanaux en résine KMPR fabriqués sur des détecteurs semiconducteurs de type p-i-n ont été identifiés comme une solution technologique pour le projet. Des détecteurs p-i-n ont ensuite été fabriqués en utilisant un procédé standard. Les performances encourageantes obtenues ont mené à initier un projet de maîtrise pour leur optimisation. En parallèle, les travaux ont été poursuivis avec des détecteurs du commerce sous forme de gaufres non découpées. Un premier dispositif intégrant des canaux en KMPR sur ces gaufres a permis de valider le concept démontrant le grand potentiel de ces choix technologiques et incitant à poursuivre les développements dans cette voie, notamment en envisageant des expériences animales. L'utilisation prolongée des canaux avec du sang non dilué est cependant particulièrement exigeante pour les matériaux artificiels. Une passivation à l'albumine a permis d'augmenter considérablement la compatibilité sanguine de la résine KMPR. Le concept initial, incluant la passivation des canaux, a ensuite été optimisé et intégré dans un système de mesure complet avec toute l'électronique et l'informatique de contrôle. Le système final a été validé chez le petit animal avec un radiotraceur connu. Ces travaux ont donné lieu à la première démonstration d'un détecteur microfluidique de haute efficacité pour la TEP et la TEM. Cette première brique d'un projet plus global est déjà un outil innovant en soi qui permettra d'augmenter l'efficacité du développement d'outils diagnostiques plus spécifiques principalement pour l'oncologie, la cardiologie et la neurologie. Mots clefs : imagerie moléculaire, tomographie d'émission par positrons (TEP), tomographie d'émission monophotonique (TEM), microfluidique, détecteur de radioactivité, KMPR, diodes p-i-n, hémocompatibilité.

Computer Based Decision Support Tool for Helicopter Mission Planning in Disaster Relief and Military Operations (Outil informatique d’aide a la decision pour la planification des missions d’helicopteres dans des operations militaires et de secours en cas de catastrophe)

DTIC Science & Technology

2008-06-01

capacity planning; • Electrical generation capacity planning; • Machine scheduling; • Freight scheduling; • Dairy farm expansion planning...Support Systems and Multi Criteria Decision Analysis Products A.2.11.2.2.1 ELECTRE IS ELECTRE IS is a generalization of ELECTRE I. It is a...criteria, ELECTRE IS supports the user in the process of selecting one alternative or a subset of alternatives. The method consists of two parts

Guidebook for Integrating a Micro Unmanned Aerial System (UAS) into Police and Emergency Operations

DTIC Science & Technology

2012-10-01

operate and must fly at higher altitudes . The fact that manned aircraft can carry personnel onboard also provides benefits as they can make on the...coûteux à utiliser et ils doivent voler à des altitudes plus élevées. Le fait que les aéronefs avec pilote à bord puissent transporter du personnel à...durée à très basse altitude permettant de prendre des photos de très près. Suffisamment petits pour tenir dans une valise, les micro-UAS sont très

List of Participating Institutions: Associated Schools Project in Education for International Co-operation and Peace = Liste des establissements participants: Systeme des ecoles associees appliquant un programme d'education pour la cooperation internationale et la paix = Lista de Instituciones Participantes: Plan de Escuelas Asociadas en la Educacion para la Cooperacion Internacional y la Paz.

ERIC Educational Resources Information Center

United Nations Educational, Scientific, and Cultural Organization, Paris (France).

A list of participating institutions at the Associated Schools Project in Education for International Co-Operation and Peace, December 31, 1985 is presented. A total of 1,970 institutions in 94 countries participated, including 47 nursery schools, 556 primary schools, 1,123 secondary schools, and 248 teacher training institutions. Addresses of…

Data encryption standard ASIC design and development report.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Robertson, Perry J.; Pierson, Lyndon George; Witzke, Edward L.

2003-10-01

This document describes the design, fabrication, and testing of the SNL Data Encryption Standard (DES) ASIC. This device was fabricated in Sandia's Microelectronics Development Laboratory using 0.6 {micro}m CMOS technology. The SNL DES ASIC was modeled using VHDL, then simulated, and synthesized using Synopsys, Inc. software and finally IC layout was performed using Compass Design Automation's CAE tools. IC testing was performed by Sandia's Microelectronic Validation Department using a HP 82000 computer aided test system. The device is a single integrated circuit, pipelined realization of DES encryption and decryption capable of throughputs greater than 6.5 Gb/s. Several enhancements accommodate ATMmore » or IP network operation and performance scaling. This design is the latest step in the evolution of DES modules.« less

Algorithme intelligent d'optimisation d'un design structurel de grande envergure

NASA Astrophysics Data System (ADS)

Dominique, Stephane

The implementation of an automated decision support system in the field of design and structural optimisation can give a significant advantage to any industry working on mechanical designs. Indeed, by providing solution ideas to a designer or by upgrading existing design solutions while the designer is not at work, the system may reduce the project cycle time, or allow more time to produce a better design. This thesis presents a new approach to automate a design process based on Case-Based Reasoning (CBR), in combination with a new genetic algorithm named Genetic Algorithm with Territorial core Evolution (GATE). This approach was developed in order to reduce the operating cost of the process. However, as the system implementation cost is quite expensive, the approach is better suited for large scale design problem, and particularly for design problems that the designer plans to solve for many different specification sets. First, the CBR process uses a databank filled with every known solution to similar design problems. Then, the closest solutions to the current problem in term of specifications are selected. After this, during the adaptation phase, an artificial neural network (ANN) interpolates amongst known solutions to produce an additional solution to the current problem using the current specifications as inputs. Each solution produced and selected by the CBR is then used to initialize the population of an island of the genetic algorithm. The algorithm will optimise the solution further during the refinement phase. Using progressive refinement, the algorithm starts using only the most important variables for the problem. Then, as the optimisation progress, the remaining variables are gradually introduced, layer by layer. The genetic algorithm that is used is a new algorithm specifically created during this thesis to solve optimisation problems from the field of mechanical device structural design. The algorithm is named GATE, and is essentially a real number genetic algorithm that prevents new individuals to be born too close to previously evaluated solutions. The restricted area becomes smaller or larger during the optimisation to allow global or local search when necessary. Also, a new search operator named Substitution Operator is incorporated in GATE. This operator allows an ANN surrogate model to guide the algorithm toward the most promising areas of the design space. The suggested CBR approach and GATE were tested on several simple test problems, as well as on the industrial problem of designing a gas turbine engine rotor's disc. These results are compared to other results obtained for the same problems by many other popular optimisation algorithms, such as (depending of the problem) gradient algorithms, binary genetic algorithm, real number genetic algorithm, genetic algorithm using multiple parents crossovers, differential evolution genetic algorithm, Hookes & Jeeves generalized pattern search method and POINTER from the software I-SIGHT 3.5. Results show that GATE is quite competitive, giving the best results for 5 of the 6 constrained optimisation problem. GATE also provided the best results of all on problem produced by a Maximum Set Gaussian landscape generator. Finally, GATE provided a disc 4.3% lighter than the best other tested algorithm (POINTER) for the gas turbine engine rotor's disc problem. One drawback of GATE is a lesser efficiency for highly multimodal unconstrained problems, for which he gave quite poor results with respect to its implementation cost. To conclude, according to the preliminary results obtained during this thesis, the suggested CBR process, combined with GATE, seems to be a very good candidate to automate and accelerate the structural design of mechanical devices, potentially reducing significantly the cost of industrial preliminary design processes.

Biomass supply chain optimisation for Organosolv-based biorefineries.

PubMed

Giarola, Sara; Patel, Mayank; Shah, Nilay

2014-05-01

This work aims at providing a Mixed Integer Linear Programming modelling framework to help define planning strategies for the development of sustainable biorefineries. The up-scaling of an Organosolv biorefinery was addressed via optimisation of the whole system economics. Three real world case studies were addressed to show the high-level flexibility and wide applicability of the tool to model different biomass typologies (i.e. forest fellings, cereal residues and energy crops) and supply strategies. Model outcomes have revealed how supply chain optimisation techniques could help shed light on the development of sustainable biorefineries. Feedstock quality, quantity, temporal and geographical availability are crucial to determine biorefinery location and the cost-efficient way to supply the feedstock to the plant. Storage costs are relevant for biorefineries based on cereal stubble, while wood supply chains present dominant pretreatment operations costs. Copyright © 2014 Elsevier Ltd. All rights reserved.

Assessment of energy-saving strategies and operational costs in full-scale membrane bioreactors.

PubMed

Gabarrón, S; Ferrero, G; Dalmau, M; Comas, J; Rodriguez-Roda, I

2014-02-15

The energy-saving strategies and operational costs of stand-alone, hybrid, and dual stream full-scale membrane bioreactors (MBRs) with capacities ranging from 1100 to 35,000 m(3) day(-1) have been assessed for seven municipal facilities located in Northeast Spain. Although hydraulic load was found to be the main determinant factor for the energy consumption rates, several optimisation strategies have shown to be effective in terms of energy reduction as well as fouling phenomenon minimization or preservation. Specifically, modifications of the biological process (installation of control systems for biological aeration) and of the filtration process (reduction of the flux or mixed liquor suspended solids concentration and installation of control systems for membrane air scouring) were applied in two stand-alone MBRs. After implementing these strategies, the yearly specific energy demand (SED) in flat-sheet (FS) and hollow-fibre (HF) stand-alone MBRs was reduced from 1.12 to 0.71 and from 1.54 to 1.12 kW h(-1) m(-3), respectively, regardless of their similar yearly averaged hydraulic loads. The strategies applied in the hybrid MBR, namely, buffering the influent flow and optimisation of both biological aeration and membrane air-scouring, reduced the SED values by 14%. These results illustrate that it is possible to apply energy-saving strategies to significantly reduce MBR operational costs, highlighting the need to optimise MBR facilities to reconsider them as an energy-competitive option. Copyright © 2014 Elsevier Ltd. All rights reserved.

Data engineering systems: Computerized modeling and data bank capabilities for engineering analysis

NASA Technical Reports Server (NTRS)

Kopp, H.; Trettau, R.; Zolotar, B.

1984-01-01

The Data Engineering System (DES) is a computer-based system that organizes technical data and provides automated mechanisms for storage, retrieval, and engineering analysis. The DES combines the benefits of a structured data base system with automated links to large-scale analysis codes. While the DES provides the user with many of the capabilities of a computer-aided design (CAD) system, the systems are actually quite different in several respects. A typical CAD system emphasizes interactive graphics capabilities and organizes data in a manner that optimizes these graphics. On the other hand, the DES is a computer-aided engineering system intended for the engineer who must operationally understand an existing or planned design or who desires to carry out additional technical analysis based on a particular design. The DES emphasizes data retrieval in a form that not only provides the engineer access to search and display the data but also links the data automatically with the computer analysis codes.

Détermination assistée par ordinateur de la structure des molécules organiques

NASA Astrophysics Data System (ADS)

Nuzillard, J.-M.

1998-02-01

Nuclear Magnetic Resonance spectroscopy offers the unique possibility of accessing proximity relationships between atoms by means of chemical shift correlation experiments. Structure determination of small molecules has become thus much simpler. Computer programs can use directly correlation information for structure analysis. The use and operation mechanism of such a program, LSD (Logic for Structure Determination) are presented. The example compound is gibberellic acid, a natural product. La spectroscopie de Résonance Magnétique Nucléaire offre un moyen unique de déterminer des relations de proximité entre atomes par le biais des expériences de corrélation. L'analyse structurale de petites molécules organiques s'en trouve extrêmement facilitée. Des programmes informatiques peuvent utiliser directement les informations de corrélation pour déduire des structures. Le fonctionnement et l'usage d'un tel programme, LSD (Logic for Structure Determination), sont détaillés sur un exemple, l'acide gibberellique.

A New Computational Technique for the Generation of Optimised Aircraft Trajectories

NASA Astrophysics Data System (ADS)

Chircop, Kenneth; Gardi, Alessandro; Zammit-Mangion, David; Sabatini, Roberto

2017-12-01

A new computational technique based on Pseudospectral Discretisation (PSD) and adaptive bisection ɛ-constraint methods is proposed to solve multi-objective aircraft trajectory optimisation problems formulated as nonlinear optimal control problems. This technique is applicable to a variety of next-generation avionics and Air Traffic Management (ATM) Decision Support Systems (DSS) for strategic and tactical replanning operations. These include the future Flight Management Systems (FMS) and the 4-Dimensional Trajectory (4DT) planning and intent negotiation/validation tools envisaged by SESAR and NextGen for a global implementation. In particular, after describing the PSD method, the adaptive bisection ɛ-constraint method is presented to allow an efficient solution of problems in which two or multiple performance indices are to be minimized simultaneously. Initial simulation case studies were performed adopting suitable aircraft dynamics models and addressing a classical vertical trajectory optimisation problem with two objectives simultaneously. Subsequently, a more advanced 4DT simulation case study is presented with a focus on representative ATM optimisation objectives in the Terminal Manoeuvring Area (TMA). The simulation results are analysed in-depth and corroborated by flight performance analysis, supporting the validity of the proposed computational techniques.

Intra-operative cardiac monitoring by trans-oesophageal Doppler is not risk free in surgical patients.

PubMed

Siddiqui, Muhammad Rafay Sameen; Sajid, Muhammad Shafiq; Baig, Mirza Khurram

2009-04-01

The advancement of medical technology and future improvements in public health will lead to surgeons operating on high risk patients. One of these advances is to use intra-operative trans-oesophageal Doppler (TOD) to optimise fluid management. TOD is known to be the most effective technique for intraoperative cardiac monitoring. We report a case of a potentially life threatening complication from intraoperative TOD monitoring.

High sensitivity pH sensing on the BEOL of industrial FDSOI transistors

NASA Astrophysics Data System (ADS)

Rahhal, Lama; Ayele, Getenet Tesega; Monfray, Stéphane; Cloarec, Jean-Pierre; Fornacciari, Benjamin; Pardoux, Eric; Chevalier, Celine; Ecoffey, Serge; Drouin, Dominique; Morin, Pierre; Garnier, Philippe; Boeuf, Frederic; Souifi, Abdelkader

2017-08-01

In this work we demonstrate the use of Fully Depleted Silicon On Insulator (FDSOI) transistors as pH sensors with a 23 nm silicon nitride sensing layer built in the Back-End-Of-Line (BEOL). The back end process to deposit the sensing layer and fabricate the electrical structures needed for testing is detailed. A series of tests employing different pH buffer solutions has been performed on transistors of different geometries, controlled via the back gate. The main findings show a shift of the drain current (ID) as a function of the back gate voltage (VB) when different pH buffer solutions are probed in the range of pH 6 to pH 8. This shift is observed at VB voltages swept from 0 V to 3 V, demonstrating the sensor operation at low voltage. A high sensitivity of up to 250 mV/pH unit (more than 4-fold larger than Nernstian response) is observed on FDSOI MOS transistors of 0.06 μm gate length and 0.08 μm gate width. She is currently working as a Postdoctoral researcher at Institut des nanotechnologies de Lyon in collaboration with STMicroelectronics and Université de Sherbrook (Canada) working on ;Integration of ultra-low-power gas and pH sensors with advanced technologies;. Her research interest includes selection, machining, optimisation and electrical characterisation of the sensitive layer for a low power consumption gas sensor based on advanced MOS transistors.

Conception d'un outil d'aide a la decision de technologies de fabrication additive en milieu aeronautique

NASA Astrophysics Data System (ADS)

Buvat, Gael

La fabrication additive offre une opportunite d'amelioration des methodes de productions de pieces. Cependant, les technologies de fabrication additive sont diverses, les fournisseurs de services sont multiples et peu de personnel est forme pour operer sur ces technologies. L'objectif de cette etude est d'emettre une suggestion de concepts d'outils d'aide a la decision de technologies, de materiaux et de post-traitements de fabrication additive en milieu aeronautique. Trois sous-objectifs sont employes. Premierement, la definition des criteres de decision de technologies, de materiaux et de post-traitements de fabrication additive. Ensuite, l'elaboration d'un cahier des charges de l'outil d'aide a la decision en accord avec les besoins industriels du secteur aeronautique. Et enfin, la suggestion de trois concepts d'outils d'aide a la decision et leur evaluation par comparaison au cahier des charges etabli. Les criteres captures aupres de 11 industriels concernent des criteres de couts, de qualite, de conception et de delai d'obtention. Ensuite, nous avons elabore un cahier des charges permettant de reunir les besoins des industriels du secteur aeronautique selon trois axes qui constituent la colonne vertebrale des outils d'aide a la decision : une suggestion d'interface utilisateur, une suggestion de bases de donnees et un moteur de selection des technologies, des materiaux et des post-traitements de fabrication additive. La convivialite de l'interface utilisateur, l'evaluation de la qualite souhaitee par l'utilisateur et la prise en compte des etudes de cas realisees par le moteur de selection sont exemples de besoins que nous avons identifie au sein de cette etude. Nous avons ensuite transcrit ces besoins en specifications techniques pour permettre une evaluation du niveau de satisfaction des industriels au travers d'un pointage des trois concepts suggeres. Ces trois concepts d'outils d'aide a la decision ont ete realises respectivement grâce a Microsoft ExcelRTM, Microsoft AccessRTM ainsi qu'une plateforme en ligne associee a l'outil d'apprentissage statistique RapidMinerRTM. Ce dernier outil en ligne a retenu l'attention des ingenieurs qui l'ont evalue principalement du fait de la prise en compte des etudes de cas dans la suggestion preferentielle de technologies, de materiaux et de post-traitements.

Urban Operations in the Year 2020 (Operations en zone urbaine en l’an 2020)

DTIC Science & Technology

2003-04-01

d’un ennemi, l’accent étant alors mis sur la phase correspondante du concept. C’est ainsi que , pour mettre l’ennemi en échec, on a généralement...recommande que l’OTAN développe des capacités à utiliser dans des zones urbaines en se concentrant sur les besoins essentiels mis en évidence dans la... on peut citer les véhicules sans pilote et les armes non létales, qui permettent de réduire les pertes, ainsi que les dispositifs de largage de

Preintervention lesion remodelling affects operative mechanisms of balloon optimised directional coronary atherectomy procedures: a volumetric study with three dimensional intravascular ultrasound

PubMed Central

von Birgelen, C; Mintz, G; de Vrey, E A; Serruys, P; Kimura, T; Nobuyoshi, M; Popma, J; Leon, M; Erbel, R; de Feyter, P J

2000-01-01

AIMS—To classify atherosclerotic coronary lesions on the basis of adequate or inadequate compensatory vascular enlargement, and to examine changes in lumen, plaque, and vessel volumes during balloon optimised directional coronary atherectomy procedures in relation to the state of adaptive remodelling before the intervention.
DESIGN—29 lesion segments in 29 patients were examined with intravascular ultrasound before and after successful balloon optimised directional coronary atherectomy procedures, and a validated volumetric intravascular ultrasound analysis was performed off-line to assess the atherosclerotic lesion remodelling and changes in plaque and vessel volumes that occurred during the intervention. Based on the intravascular ultrasound data, lesions were classified according to whether there was inadequate (group I) or adequate (group II) compensatory enlargement.
RESULTS—There was no significant difference in patient and lesion characteristics between groups I and II (n = 10 and 19), including lesion length and details of the intervention. Quantitative coronary angiographic data were similar for both groups. However, plaque and vessel volumes were significantly smaller in group I than in II. In group I, 9 (4)% (mean (SD)) of the plaque volume was ablated, while in group II 16 (11)% was ablated (p = 0.01). This difference was reflected in a lower lumen volume gain in group I than in group II (46 (18) mm3 v 80 (49) mm3 (p < 0.02)).
CONCLUSIONS—Preintervention lesion remodelling has an impact on the operative mechanisms of balloon optimised directional coronary atherectomy procedures. Plaque ablation was found to be particularly low in lesions with inadequate compensatory vascular enlargement.


Keywords: intravascular ultrasound; ultrasonics; remodelling; coronary artery disease; atherectomy PMID:10648496

Developpement d'un catalyseur nickel-alumine efficace pour le reformage de diesel a la vapeur d'eau et etude du systeme reactionnel

NASA Astrophysics Data System (ADS)

Fauteux-Lefebvre, Clemence

Le developpement de sources d'energie alternatives fiables et efficaces est aujourd'hui une necessite. L' interet dans le reformage d'hydrocarbures liquides est ainsi croissant puisqu'il s'agit d'une voie pour l'alimentation des piles a combustible. Les piles a combustible ont une efficacite pour la conversion d'energie en electricite plus grande que celle des moteurs a combustion et font ainsi partie de la recherche de solution en efficacite energetique. Ces piles consomment de l'hydrogene comme combustible pour produire de l'electricite, d'ou l'interet pour le reformage. En effet, cette reaction permet de produire de l'hydrogene et du monoxyde de carbone (un autre combustible des piles a combustible a electrolyte solide) a partir d'hydrocarbure liquide, notamment le diesel. Les piles pourraient donc etre integrees avec une unite de reformage leur fournissant directement le combustible necessaire a partir de diesel. Dans ce projet de recherche, un nouveau catalyseur de nickel sous forme de spinelle nickel-alumine (spinelle NiAl2O4 sur support d'alumine et de zircone stabilisee avec yttria) a ete developpe et teste en laboratoire pour du reformage de propane, d'hydrocarbures liquides et de diesel, a la vapeur d'eau. Par ailleurs, une methode d'ajout des reactifs novatrice a ete utilisee afin de diminuer la pyrolyse precedant le reformage, en utilisant une emulsion. Les resultats de reformage d'hydrocarbures purs ont montre des concentrations tres pres de l'equilibre thermodynamique et une activite constante sans desactivation du catalyseur ni formation de carbone, et ce avec des ratios H2O/C de moins de 2.5 et des temperatures d'operation variant entre 630 °C et 750 °C. Lors de tests effectues en utilisant du diesel fossile, a 705°C, avec un debit volumique des reactifs de plus de 50 000 cm3gcat-1h-1 et un ratio H2O/C de moins de 2.5, l'activite a ete maintenue pendant plus de 15 heures, malgre une operation en cycles. L'analyse du catalyseur apres cette utilisation n'a montre aucun carbone significatif sur la surface.- En comparaison, un catalyseur de nickel metallique sur support d'Al2O3 et YSZ a ete utilise dans des conditions similaires. Il y a eu desactivation du catalyseur et obstruction du reacteur par du carbone apres trois heures d'operation. L'analyse de ce catalyseur a permis de verifier qu'il etait recouvert de carbone en filament. L'analyse du systeme reactionnel a montre que la reaction est controlee par la reaction de. surface et non par le transfert de masse. Par ailleurs, les analyses des catalyseurs de spinelle ont demontre qu'il n'y avait pas de modification de sa forme chimique ni de reduction du spinelle en nickel metallique apres l'utilisation. Mots cles : Reformage a la vapeur, diesel, hydrocarbure liquide, catalyseur, spinelle nickel-alumine, equilibre thermodynamique

Mesure Objective De L'attenuation et De L'effet D'occlusion Des Protecteurs Auditifs a Partir Des Potentiels Evoques Stationnaires et Multiples =

NASA Astrophysics Data System (ADS)

Valentin, Olivier

Selon l'Organisation mondiale de la sante, le nombre de travailleurs exposes quotidiennement a des niveaux de bruit prejudiciables a leur audition est passe de 120 millions en 1995 a 250 millions en 2004. Meme si la reduction du bruit a la source devrait etre toujours privilegiee, la solution largement utilisee pour lutter contre le bruit au travail reste la protection auditive individuelle. Malheureusement, le port des protecteurs auditifs n'est pas toujours respecte par les travailleurs car il est difficile de fournir un protecteur auditif dont le niveau d'attenuation effective est approprie a l'environnement de travail d'un individu. D'autre part, l'occlusion du canal auditif induit une modification de la perception de la parole, ce qui cree un inconfort incitant les travailleurs a retirer leurs protecteurs. Ces deux problemes existent parce que les methodes actuelles de mesure de l'effet d'occlusion et de l'attenuation sont limitees. Les mesures objectives basees sur des mesures microphoniques intra-auriculaires ne tiennent pas compte de la transmission directe du son a la cochlee par conduction osseuse. Les mesures subjectives au seuil de l'audition sont biaisees a cause de l'effet de masquage aux basses frequences induit par le bruit physiologique. L'objectif principal de ce travail de these de doctorat est d'ameliorer la mesure de l'attenuation et de l'effet d'occlusion des protecteurs auditifs intra-auriculaires. L'approche generale consiste a : (i) verifier s'il est possible de mesurer l'attenuation des protecteurs auditifs grâce au recueil des potentiels evoques stationnaires et multiples (PEASM) avec et sans protecteur auditif (protocole 1), (ii) adapter cette methodologie pour mesurer l'effet d'occlusion induit par le port de protecteur auditifs intra-auriculaires (protocole 2), et (iii) valider chaque protocole par l'intermediaire de mesures realisees sur sujets humains. Les resultats du protocole 1 demontrent que les PEASM peuvent etre utilises pour mesurer objectivement l'attenuation des protecteurs auditifs : les resultats obtenus a 500 Hz et 1 kHz demontrent que l'attenuation mesuree a partir des PEASM est relativement equivalente a l'attenuation calculee par la methode REAT, ce qui est en accord avec ce qui etait attendu puisque l'effet de masquage induit par le bruit physiologique aux basses frequences est relativement negligeable a ces frequences. Les resultats du protocole 2 demontrent que les PEASM peuvent etre egalement utilises pour mesurer objectivement l'effet d'occlusion induit par le port de protecteurs auditifs : l'effet d'occlusion mesure a partir des PEASM a 500 Hz est plus eleve que celui calcule par l'intermediaire de la methode subjective au seuil de l'audition, ce qui est en accord avec ce qui etait attendu puisqu'en dessous d'1 kHz, l'effet de masquage induit par le bruit physiologique aux basses frequences est source de biais pour les resultats obtenus par la methode subjective car il y a surestimation des seuils de l'audition en basse frequence lors du port de protecteurs auditifs. Toutefois, les resultats obtenus a 250 Hz sont en contradiction avec les resultats attendus. D'un point de vue scientifique, ce travail de these a permis de realiser deux nouvelles methodes innovantes pour mesurer objectivement l'attenuation et l'effet d'occlusion des protecteurs auditifs intra-auriculaires par electroencephalographie. D'un point de vue sante et securite au travail, les avancees presentees dans cette these pourraient aider a concevoir des protecteurs auditifs plus performants. En effet, si ces deux nouvelles methodes objectives etaient normalisees pour caracteriser les protecteurs auditifs intra-auriculaires, elles pourraient permettre : (i) de mieux apprehender l'efficacite reelle de la protection auditive et (ii) de fournir une mesure de l'inconfort induit par l'occlusion du canal auditif lors du port de protecteurs. Fournir un protecteur auditif dont l'efficacite reelle est adaptee a l'environnement de travail et dont le confort est optimise permettrait, sur le long terme, d'ameliorer les conditions des travailleurs en minimisant le risque lie a la degradation de leur appareil auditif. Les perspectives de travail proposees a la fin de cette these consistent principalement a : (i) exploiter ces deux methodes avec une gamme frequentielle plus etendue, (ii) explorer la variabilite intra-individuelle de chacune des methodes, (iii) comparer les resultats des deux methodes avec ceux obtenus par l'intermediaire de la methode "Microphone in Real Ear" (MIRE) et (iv) verifier la compatibilite de chacune des methodes avec tous les types de protecteurs auditifs. De plus, pour la methode de mesure de l'effet d'occlusion utilisant les PEASM, une etude complementaire est necessaire pour lever la contradiction observee a 250 Hz.

Introduction à une théorie des systèmes composites : exemples simples de matériaux lamellaires

NASA Astrophysics Data System (ADS)

Akjouj, A.; Sylla, B.; Dobrzynski, L.

This review paper is mostly an introduction to the linear response theory for composite systems. The composite materials are defined here as being formed by different homogeneous parts connected together by interfaces. This type of material can be constructed with the help of homogeneous "bricks" cuted out from infinite materials. This cutting procedures are realized with the help of cleavage operators. The "bricks" are then put together by a coupling operator. This construction manner enables to obtain for any composite system a general equation relating the composite response function (called also Green's function) to the elements of the infinite material response functions and to the cleavage and coupling operators. A general and unified formulation valid as well in matrix algebra as in the algebra of differential equations results from this approach. Any general theory is abstract ; simple examples help very much to understand it. The principal aim of this review paper is the introduction of a general theory for composite systems through simple and analytical examples from the fields of phonons, magnons and electrons in the lamellar composite materials. In order to achieve this goal, the algebra of the examples is as explicit as possible. The references of what was already realized in theory of composite response are discussed also. A prospective and non exhaustive study of all the fields where such a theory can prove to be helpful is given also in this review paper. Cet article de revue est essentiellement une introduction à la théorie de la réponse linéaire dans les systèmes composites. Les matériaux composites sont définis ici comme étant formés de parties homogènes différentes reliées par des interfaces. Ce type de matériaux peut être construit à partir de "briques" homogènes découpées dans des matériaux infinis. Ces opérations de découpage sont effectuées par l'intermédiaire d'opérateurs de clivage. Les "briques" sont ensuite assemblées grâce à un opérateur de couplage. Cette façon de construire un système composite permet d'obtenir une équation générale reliant la fonction réponse (appelée aussi fonction de Green) du système composite aux éléments des fonctions réponses des matériaux infinis et aux opérateurs de clivage et de couplage. Une formulation générale unifiée valable aussi bien en algèbre des matrices pour les systèmes discrets qu'en algèbre différentielle pour les systèmes continus en résulte. Toute théorie générale est abstraite ; sa compréhension est grandement facilitée par la pratique d'exemples simples. Le but principal de cet article de revue est d'introduire une théorie générale des systèmes composites grâce à des exemples simples et analytiques empruntés au domaine des phonons, des magnons et des électrons dans les matériaux composites lamellaires (multicouches). Afin d'atteindre ce but, les développements mathématiques des exemples sont donnés le plus explicitement possible. Une revue bibliographique de ce qui a été déjà réalisé en théorie de la réponse dans les matériaux composites est donnée également. Une étude prospective et non exhaustive des très nombreux domaines où cette théorie peut être utile prolonge la revue bibliographique.

Magnetic resonance imaging-guided surgical design: can we optimise the Fontan operation?

PubMed

Haggerty, Christopher M; Yoganathan, Ajit P; Fogel, Mark A

2013-12-01

The Fontan procedure, although an imperfect solution for children born with a single functional ventricle, is the only reconstruction at present short of transplantation. The haemodynamics associated with the total cavopulmonary connection, the modern approach to Fontan, are severely altered from the normal biventricular circulation and may contribute to the long-term complications that are frequently noted. Through recent technological advances, spear-headed by advances in medical imaging, it is now possible to virtually model these surgical procedures and evaluate the patient-specific haemodynamics as part of the pre-operative planning process. This is a novel paradigm with the potential to revolutionise the approach to Fontan surgery, help to optimise the haemodynamic results, and improve patient outcomes. This review provides a brief overview of these methods, presents preliminary results of their clinical usage, and offers insights into its potential future directions.

Assessment of Intelligent Tutoring Systems Technologies and Opportunities (Evaluation et opportunites des technologies des systemes de tutorat intelligents)

DTIC Science & Technology

2018-01-01

His research designs adaptive systems for online content, by integrating research in psychology and education, human- ANNEX A − INTELLIGENT TUTORING...related scientific activities that include systems engineering, operational research and analysis, synthesis, integration and validation of knowledge...System Analysis and Studies Panel • SCI Systems Concepts and Integration Panel • SET Sensors and Electronics Technology Panel These Panels and Group

Analysis of phospholipid fatty acids (PLFA) to characterize microbial communities in aquifers

NASA Astrophysics Data System (ADS)

Green, Christopher T.; Scow, Kate M.

This paper reviews published applications of lipid-based biochemical techniques for characterizing microbial communities in aquifers and other deep subsurface habitats. These techniques, such as phospholipid fatty acid (PLFA) analysis, can provide information on a variety of microbial characteristics, such as biomass, physiology, taxonomic and functional identity, and overall community composition. In addition, multivariate statistical analysis of lipid data can relate spatial or temporal changes in microbial communities to environmental factors. The use of lipid-based techniques in the study of groundwater microbiology is advantageous because they do not require culturing and can provide quantitative data on entire communities. However, combined effects of physiological and phylogenetic changes on the lipid composition of a community can confound interpretation of the data, and many questions remain about the validity of various lipid techniques. Despite these caveats, lipid-based research has begun to show trends in community composition in contaminated and pristine aquifers that contribute to our understanding of groundwater microbial ecology and have potential for use in optimization of bioremediation of groundwater pollutants. Résumé Ce papier passe en revue les applications des techniques biochimiques basées sur les lipides pour caractériser les communautés microbiennes présentes dans les aquifères et dans les autres habitats souterrains profonds. Ces techniques, telles que l'analyse des acides gras phospholipidiques (PLFA), peuvent fournir des informations sur un ensemble de caractères microbiens, tels que la biomasse, la physiologie, l'identité taxonomique et fonctionnelle, et surtout la composition de la communauté. En outre, l'analyse statistique multivariée des données sur les lipides peut établir les liens entre des changements spatiaux ou temporels dans la communauté microbienne et des facteurs environnementaux. L'utilisation des techniques basées sur les lipides dans l'étude de la microbiologie des eaux souterraines est intéressante parce qu'elle ne nécessite pas de mise en culture et qu'elle peut fournir des données quantitatives sur les communautés dans leur ensemble. Toutefois, les effets combinés de changements physiologiques et phylogénétiques sur la composition d'une communauté peuvent brouiller l'interprétation des données de nombreuses questions se posent sur la validité des différentes techniques lipidiques. Malgré ces oppositions, la recherche basée sur les lipides a commencéà montrer des tendances dans la composition des communautés dans les aquifères pollués et dans ceux non perturbés ces résultats contribuent ainsi à notre compréhension de l'écologie microbienne des eaux souterraines et montrent qu'il existe un potentiel pour leur utilisation en vue d'une optimisation de la dépollution biologique des eaux souterraines. Resumen Se revisan distintas técnicas bioquímicas que se basan en el análisis de lípidos para caracterizar las comunidades microbianas en hábitats subsuperficiales, incluyendo acuíferos. Estas técnicas, entre las que se incluye el análisis de ácidos grasos fosfolípidos (PLFA), pueden proporcionar información sobre toda una serie de características de las comunidades microbianas, como su biomasa, fisiología, identidad taxonómica y funcional y composición. Además, el análisis estadístico multivariado de los datos de lípidos permite relacionar los cambios espaciales o temporales en las comunidades microbianas con factores ambientales. Las técnicas basadas en lípidos son muy útiles para el estudio microbiológico de las aguas subterráneas, puesto que no requieren cultivos y además proporcionan datos cuantitativos de comunidades completas. Sin embargo, la acción combinada de los cambios fisiológicos y filogenéticos en la composición de lípidos en una comunidad pueden confundir la interpretación de los datos, por lo existen muchas cuestiones abiertas respecto a la validez de algunas de estas técnicas. A pesar de estas dificultades, estas técnicas han permitido detectar diferentes tendencias en la composición de las comunidades en acuíferos con y sin contaminación, lo que contribuye a nuestro entendimiento de la ecología microbiana de los acuíferos. Este último aspecto tiene un uso potencial en la optimización de los métodos de biorremediación de acuíferos.

Integrated health management and control of complex dynamical systems

NASA Astrophysics Data System (ADS)

Tolani, Devendra K.

2005-11-01

A comprehensive control and health management strategy for human-engineered complex dynamical systems is formulated for achieving high performance and reliability over a wide range of operation. Results from diverse research areas such as Probabilistic Robust Control (PRC), Damage Mitigating/Life Extending Control (DMC), Discrete Event Supervisory (DES) Control, Symbolic Time Series Analysis (STSA) and Health and Usage Monitoring System (HUMS) have been employed to achieve this goal. Continuous-domain control modules at the lower level are synthesized by PRC and DMC theories, whereas the upper-level supervision is based on DES control theory. In the PRC approach, by allowing different levels of risk under different flight conditions, the control system can achieve the desired trade off between stability robustness and nominal performance. In the DMC approach, component damage is incorporated in the control law to reduce the damage rate for enhanced structural durability. The DES controller monitors the system performance and, based on the mission requirements (e.g., performance metrics and level of damage mitigation), switches among various lower-level controllers. The core idea is to design a framework where the DES controller at the upper-level, mimics human intelligence and makes appropriate decisions to satisfy mission requirements, enhance system performance and structural durability. Recently developed tools in STSA have been used for anomaly detection and failure prognosis. The DMC deals with the usage monitoring or operational control part of health management, where as the issue of health monitoring is addressed by the anomaly detection tools. The proposed decision and control architecture has been validated on two test-beds, simulating the operations of rotorcraft dynamics and aircraft propulsion.

78 FR 4071 - Safety Zone, Brandon Road Lock and Dam to Lake Michigan Including Des Plaines River, Chicago...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-18

... hazards associated with the U.S. Army Corps of Engineers Electromagnetic Fields evaluation operations... Michigan has determined that the U.S. Army Corps of Engineers Electromagnetic Fields evaluation operations...

Implantate im Mittelohrbereich - Teil 2 (Ergänzungen 2007)

NASA Astrophysics Data System (ADS)

Stieve, M.; Lenarz, Thomas

In Deutschland leben ca. 12 Millionen Menschen, die an einer ein- oder beidseitigen Schwerhörigkeit leiden. Diese kann angeboren oder im Laufe des Lebens erworben sein. Klinisch und therapeutisch wichtig ist die Unterscheidung hinsichtlich des Schädigungsortes im Bereich des Mittelohres, d. h. eine Schalleitungsschwerhörigkeit, oder im Bereich des Innenohres, d. h. eine Schallempfindungsschwerhörigkeit, wobei hier der Schädigungsort auch am Hörnerven oder in den zentralen Hörabschnitten liegen kann. Therapeutisch lassen sich sowohl Schwerhörigkeiten im Bereich des Mittelohres als auch im Innenohr und sogar im Hirnstammbereich (Hirnstammimplantat) behandeln. 1,9 Millionen Schwerhörige haben eine Erkrankung im Mittelohrbereich, d. h. der Schall kann nur ungenügend auf das Innenohr übertragen werden. Die Ursache besteht meist in einer chronischen Mittelohrentzündung, die zu einer Zerstörung des Trommelfells und der Gehörknöchelchenkette geführt haben. Therapeutisch und damit als Prinzip der operativen Hörverbesserung steht primär der Verschluß des Trommelfells oder eine Rekonstruktion der Gehörknöchelchen. Mittelohroperationen werden mikrochirurgisch unter dem Operationsmikroskop durchgeführt, wobei zunächst durch eine sanierende Operation der Entzündungsprozeß entfernt wird und nach einer Ausheilungszeit die Gehörknöchelchenkette durch künstliche Prothesen rekonstruiert werden kann.

Purification of biodiesel by choline chloride based deep eutectic solvent

NASA Astrophysics Data System (ADS)

Niawanti, Helda; Zullaikah, Siti; Rachimoellah, M.

2017-05-01

Purification is a crucial step in biodiesel production to meet the biodiesel standard. This study purified biodiesel using choline chloride based deep eutectic solvent (DES). DES was used to reduce unreacted oil and unsaponifiable matter in rice bran oil based biodiesel. The objective of this work was to study the effect of extraction time using DES on the content and yield of fatty acid methyl ester (FAME). Rice bran used in this work contains 16.49 % of oil with initial free fatty acids (FFA) of 44.75 %. Acid catalyzed methanolysis was employed to convert rice bran oil (RBO) into biodiesel under following operation conditions: T = 60 °C, t = 8 h, molar ratio of oil to methanol = 1/10, H2SO4 = 1% w/w of oil. Rice bran oil based biodiesel obtained contain 89.05 % of FAME with very low FFA content (0.05 %). DES was made from a mixture of choline chloride and ethylene glycol with molar ratio of 1/2. Molar ratio of crude biodiesel to DES were 1/2 and 1/4. Extraction time was varied from 15 minutes to 240 minutes at 30 °C. The highest FAME content was obtained after purification for 240 min. at molar ratio crude biodiesel to DES 1/4 was 96.60 %. This work shows that DES has potential to purify biodiesel from non-edible raw material, such as RBO.

Low-energy biomass pretreatment with deep eutectic solvents for bio-butanol production.

PubMed

Procentese, Alessandra; Raganati, Francesca; Olivieri, Giuseppe; Russo, Maria Elena; Rehmann, Lars; Marzocchella, Antonio

2017-11-01

Waste lettuce leaves - from the "fresh cut vegetable" industry - were pretreated with the deep eutectic solvent (DES) made of choline chloride - glycerol. Reaction time (3-16h) and the operation temperature (80-150°C) were investigated. Enzymatic glucose and xylose yields of 94.9% and 75.0%, respectively were obtained when the biomass was pretreated at 150°C for 16h. Sugars contained in the biomass hydrolysate were fermented in batch cultures of Clostridium acetobutylicum DSMZ 792. The energy consumption and the energy efficiency related to the DES pretreatment were calculated and compared to the most common lignocellulosic pretreatment processes reported in the literature. The DES pretreatment process was characterized by lower energy required (about 28% decrease and 72% decrease) than the NAOH pretreatment and steam explosion process respectively. The Net Energy Ratio (NER) value related to butanol production via DES biomass pretreatment was assessed. Copyright © 2017 Elsevier Ltd. All rights reserved.

Performance assessment of the antenna setup for the ITER plasma position reflectometry in-vessel systems.

PubMed

Varela, P; Belo, J H; Quental, P B

2016-11-01

The design of the in-vessel antennas for the ITER plasma position reflectometry diagnostic is very challenging due to the need to cope both with the space restrictions inside the vacuum vessel and with the high mechanical and thermal loads during ITER operation. Here, we present the work carried out to assess and optimise the design of the antenna. We show that the blanket modules surrounding the antenna strongly modify its characteristics and need to be considered from the early phases of the design. We also show that it is possible to optimise the antenna performance, within the design restrictions.

Astroparticle and neutrino oscillation research with KM3NeT

NASA Astrophysics Data System (ADS)

Kulikovskiy, V.

2017-05-01

Two next generation underwater neutrino telescopes are under construction in the Mediterranean sea by the KM3NeT Collaboration. The first, ORCA, optimised for atmospheric neutrinos detection will be capable to determine the neutrino mass hierarchy with >3{σ} after three years of operation, i.e. as early as 2023. The second, ARCA, is optimised for high energy neutrino astronomy. Its location allows for surveying most of the Galactic Plane, including the Galactic Centre and the most promising source candidates. The neutrino diffuse emission flux measured by the IceCube Collaboration can be observed with 5{σ} in less than one year.

Characterisation and optimisation of the new Prompt Gamma-ray Activation Analysis (PGAA) facility at FRM II

NASA Astrophysics Data System (ADS)

Canella, Lea; Kudějová, Petra; Schulze, Ralf; Türler, Andreas; Jolie, Jan

2011-04-01

At the research reactor Forschungs-Neutronenquelle Heinz Maier-Leibnitz (FRM II) a new Prompt Gamma-ray Activation Analysis (PGAA) facility was installed. The instrument was originally built and operating at the spallation source at the Paul Scherrer Institute in Switzerland. After a careful re-design in 2004-2006, the new PGAA instrument was ready for operation at FRM II. In this paper the main characteristics and the current operation conditions of the facility are described. The neutron flux at the sample position can reach up 6.07×1010 [cm-2 s-1], thus the optimisation of some parameters, e.g. the beam background, was necessary in order to achieve a satisfactory analytical sensitivity for routine measurements. Once the optimal conditions were reached, detection limits and sensitivities for some elements, like for example H, B, C, Si, or Pb, were calculated and compared with other PGAA facilities. A standard reference material was also measured in order to show the reliability of the analysis under different conditions at this instrument.

Advanced data management for optimising the operation of a full-scale WWTP.

PubMed

Beltrán, Sergio; Maiza, Mikel; de la Sota, Alejandro; Villanueva, José María; Ayesa, Eduardo

2012-01-01

The lack of appropriate data management tools is presently a limiting factor for a broader implementation and a more efficient use of sensors and analysers, monitoring systems and process controllers in wastewater treatment plants (WWTPs). This paper presents a technical solution for advanced data management of a full-scale WWTP. The solution is based on an efficient and intelligent use of the plant data by a standard centralisation of the heterogeneous data acquired from different sources, effective data processing to extract adequate information, and a straightforward connection to other emerging tools focused on the operational optimisation of the plant such as advanced monitoring and control or dynamic simulators. A pilot study of the advanced data manager tool was designed and implemented in the Galindo-Bilbao WWTP. The results of the pilot study showed its potential for agile and intelligent plant data management by generating new enriched information combining data from different plant sources, facilitating the connection of operational support systems, and developing automatic plots and trends of simulated results and actual data for plant performance and diagnosis.

Guidance, Control and Positioning of Future Precision Guided Stand-off Weapons Systems

DTIC Science & Technology

1986-06-01

environment tests. The programme consists of approximately ten fl ights, the firsts having a passive nature . These are followed by progressive...Limited _. .. , 40 Chigwell Lane, Loughton, Essex IGIO 3TZ PREFACE The environment in which tactical air forces must be able to operate is becoming...GUIDANCE SYSTEM CONCEPT FOR HIGH-DYNAMIC ENVIRONMENT * by U.K.Krogmann 17 APPLICATIONS DES CENTRALES A COMPOSANTS LIES AUX MISSILES TACTIQUES: CAS DES

The International Development Research Centre: A Guide for the Canadian University Research Community = Le Centre de recherches pour le developpement international: guide a l'intention des scientifiques des universites Canadiennes.

ERIC Educational Resources Information Center

Tillman, George; Wasilewski, Ania, Ed.

Written in both English and French this is a manual for the Canadian research community. It describes the International Development Research Centre (IDRC) and its operations. The main objective of the IDRC is to assist scientists in developing countries to identify and conduct research into long term practical solutions to development problems.…

Canadian Forces in Joint Fires Support - Human Factors Analysis: Coalition Operations

DTIC Science & Technology

2010-08-01

mesure/l’estimation des dommages collatéraux (EDC). Outil pour comprendre l’EDC de certains pays comparativement à celle des membres de l’OTAN et...Program (TDP). The TDP is aimed at concept development, evaluation for force design , and the demonstration of technologies fostered by Defence Research...logistics and the designation of targets on the joint targeting list. • Tactical capability / response time / training. The tactical capability of a fire

A Survey of Blast Injury across the Full Landscape of Military Science (Etude d’ensemble des blessures dues aux explosions a travers le panorama complet de la science militaire)

DTIC Science & Technology

2011-04-01

Military Science (RTO-MP-HFM-207) Executive Summary Blast injury is a significant source of casualties in current NATO operations. The term “blast...toxicologique du souffle incluant les mécanismes de dose (par exemple, normes d’exposition à un tube à choc ), la description des points limites dose

Vehicle trajectory linearisation to enable efficient optimisation of the constant speed racing line

NASA Astrophysics Data System (ADS)

Timings, Julian P.; Cole, David J.

2012-06-01

A driver model is presented capable of optimising the trajectory of a simple dynamic nonlinear vehicle, at constant forward speed, so that progression along a predefined track is maximised as a function of time. In doing so, the model is able to continually operate a vehicle at its lateral-handling limit, maximising vehicle performance. The technique used forms a part of the solution to the motor racing objective of minimising lap time. A new approach of formulating the minimum lap time problem is motivated by the need for a more computationally efficient and robust tool-set for understanding on-the-limit driving behaviour. This has been achieved through set point-dependent linearisation of the vehicle model and coupling the vehicle-track system using an intrinsic coordinate description. Through this, the geometric vehicle trajectory had been linearised relative to the track reference, leading to new path optimisation algorithm which can be formed as a computationally efficient convex quadratic programming problem.

Nonlinear predictive control of a boiler-turbine unit: A state-space approach with successive on-line model linearisation and quadratic optimisation.

PubMed

Ławryńczuk, Maciej

2017-03-01

This paper details development of a Model Predictive Control (MPC) algorithm for a boiler-turbine unit, which is a nonlinear multiple-input multiple-output process. The control objective is to follow set-point changes imposed on two state (output) variables and to satisfy constraints imposed on three inputs and one output. In order to obtain a computationally efficient control scheme, the state-space model is successively linearised on-line for the current operating point and used for prediction. In consequence, the future control policy is easily calculated from a quadratic optimisation problem. For state estimation the extended Kalman filter is used. It is demonstrated that the MPC strategy based on constant linear models does not work satisfactorily for the boiler-turbine unit whereas the discussed algorithm with on-line successive model linearisation gives practically the same trajectories as the truly nonlinear MPC controller with nonlinear optimisation repeated at each sampling instant. Copyright © 2017 ISA. Published by Elsevier Ltd. All rights reserved.

Optimisation of substrate blends in anaerobic co-digestion using adaptive linear programming.

PubMed

García-Gen, Santiago; Rodríguez, Jorge; Lema, Juan M

2014-12-01

Anaerobic co-digestion of multiple substrates has the potential to enhance biogas productivity by making use of the complementary characteristics of different substrates. A blending strategy based on a linear programming optimisation method is proposed aiming at maximising COD conversion into methane, but simultaneously maintaining a digestate and biogas quality. The method incorporates experimental and heuristic information to define the objective function and the linear restrictions. The active constraints are continuously adapted (by relaxing the restriction boundaries) such that further optimisations in terms of methane productivity can be achieved. The feasibility of the blends calculated with this methodology was previously tested and accurately predicted with an ADM1-based co-digestion model. This was validated in a continuously operated pilot plant, treating for several months different mixtures of glycerine, gelatine and pig manure at organic loading rates from 1.50 to 4.93 gCOD/Ld and hydraulic retention times between 32 and 40 days at mesophilic conditions. Copyright © 2014 Elsevier Ltd. All rights reserved.

78 FR 17099 - Safety Zone, Brandon Road Lock and Dam to Lake Michigan including Des Plaines River, Chicago...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-20

... associated with the U.S. Army Corps of Engineers Electromagnetic Fields evaluation operations. During any of... has determined that the U.S. Army Corps of Engineers Electromagnetic Fields evaluation operation poses...

Reservoir optimisation using El Niño information. Case study of Daule Peripa (Ecuador)

NASA Astrophysics Data System (ADS)

Gelati, Emiliano; Madsen, Henrik; Rosbjerg, Dan

2010-05-01

The optimisation of water resources systems requires the ability to produce runoff scenarios that are consistent with available climatic information. We approach stochastic runoff modelling with a Markov-modulated autoregressive model with exogenous input, which belongs to the class of Markov-switching models. The model assumes runoff parameterisation to be conditioned on a hidden climatic state following a Markov chain, whose state transition probabilities depend on climatic information. This approach allows stochastic modeling of non-stationary runoff, as runoff anomalies are described by a mixture of autoregressive models with exogenous input, each one corresponding to a climate state. We calibrate the model on the inflows of the Daule Peripa reservoir located in western Ecuador, where the occurrence of El Niño leads to anomalously heavy rainfall caused by positive sea surface temperature anomalies along the coast. El Niño - Southern Oscillation (ENSO) information is used to condition the runoff parameterisation. Inflow predictions are realistic, especially at the occurrence of El Niño events. The Daule Peripa reservoir serves a hydropower plant and a downstream water supply facility. Using historical ENSO records, synthetic monthly inflow scenarios are generated for the period 1950-2007. These scenarios are used as input to perform stochastic optimisation of the reservoir rule curves with a multi-objective Genetic Algorithm (MOGA). The optimised rule curves are assumed to be the reservoir base policy. ENSO standard indices are currently forecasted at monthly time scale with nine-month lead time. These forecasts are used to perform stochastic optimisation of reservoir releases at each monthly time step according to the following procedure: (i) nine-month inflow forecast scenarios are generated using ENSO forecasts; (ii) a MOGA is set up to optimise the upcoming nine monthly releases; (iii) the optimisation is carried out by simulating the releases on the inflow forecasts, and by applying the base policy on a subsequent synthetic inflow scenario in order to account for long-term costs; (iv) the optimised release for the first month is implemented; (v) the state of the system is updated and (i), (ii), (iii), and (iv) are iterated for the following time step. The results highlight the advantages of using a climate-driven stochastic model to produce inflow scenarios and forecasts for reservoir optimisation, showing potential improvements with respect to the current management. Dynamic programming was used to find the best possible release time series given the inflow observations, in order to benchmark any possible operational improvement.

Modelling of enterobacterial loads to the Baie des Veys (Normandy, France).

PubMed

Lafforgue, Michel; Gerard, Laure; Vieillard, Celine; Breton, Marguerite

2018-06-01

The Baie des Veys (Normandy, France) has abundant stocks of shellfish (oyster and cockle farms). Water quality in the bay is affected by pollutant inputs from a 3500 km 2 watershed and notably occasional episodes of contamination by faecal coliforms. In order to characterise enterobacterial loads and develop a plan of action to improve the quality of seawater and shellfish in the bay, a two-stage modelling procedure was adopted. This focused on Escherichia coli and included a catchment model describing the E. coli releases, and the transport and die-off of this bacteria up to the coast. The output from this model then served as input for a marine model used to determine the concentration of E. coli in seawater. A total 60 scenarios were tested, including different wind, tidal, rainfall and temperature conditions and accidental pollution events, for both current situations and future scenarios. The modelling results highlighted the impact of rainfall on E. coli loadings to the sea, as well as the effects of sluice gates and tidal cycles, which dictated the use of an hourly timescale for the modelling process. The coupled models also made it possible to identify the origin of these enterobacteria as found in shellfish harvesting areas, both in terms of the contributing watercourses and the sources of contamination of those watercourses. The tool can accordingly be used to optimise remedial action. Copyright © 2018 Elsevier GmbH. All rights reserved.

Emergency Management Operations Process Mapping: Public Safety Technical Program Study

DTIC Science & Technology

2011-02-01

Enterprise Architectures in industry, and have been successfully applied to assist companies to optimise interdependencies and relationships between...model for more in-depth analysis of EM processes, and for use in tandem with other studies that apply modeling and simulation to assess EM...for use in tandem with other studies that apply modeling and simulation to assess EM operational effectiveness before and after changing elements

The relief operation in puno district, peru, after the 1986 floods of lake titicaca.

PubMed

Sztorch, L; Gicquel, V; Desenclos, J C

1989-03-01

The 1985-86 rainy season in Peru was disastrous due to very high precipitation. Because of the unusual level of floods in the Lake Titicaca area and the increasing number of affected people, the Peruvian Government established an emergency relief plan and appealed for international aid. At that time the situation was already very critical. The lack of preparedness made the implementation of the relief operation difficult. Our paper describes the intervention of a French N.G.O. (Médecins Sans Trontières), requested by the Peruvian authorities. The early phase of the relief programme and its methodology are described. Problems within this relief programme and the further long-term development action that should be undertaken are discussed. Au Pérou, la saison des pluies 85-86 a été catastrophique par l'importance des précipitations. Au cours des premiers mois de l'année 1986, devant l'ampleur inhabituelle des inondations dans la région du lac Titicaca et le nombre sans cesse croissant de sinistrés, le gouvernement pbruvien décide de mettre en route un plan national de secours d'urgence enfaisant appel à l'aide internationale. Mais la réponse est déjá tardive et le manque de mesures préventives fait que l'organisation des secours se heurte à un grand nombre de difficultés. Notre étude se situe dans le cadre de l'intervention d'une organisation non gouvernementale européenne, sollicitée par le gouvernement péruvien pour une collaboration dans la phase des premiers secours à cette population. Les problémes posés lors de cette opération et la suite à donner à l'assistance a moyen et a long terme sont discutés.

Rotorcraft Drivetrain Life Safety and Reliability (Cycle de Vie, Securite et Fiabilite des Chaines Dynamiques des Avions a Voilure Tournante)

DTIC Science & Technology

1990-06-01

design and component technologies are reviewed against a background of accident data analysis , resulting in grounds for confidence in higher safety levels...constructors or operators taking voluntary actions based on accident investigations and their own data . Analysis of the CAA Summaty data (Appendix 3...of engines. In the accident data analysis in Appendix 3, insufficient data was available to determine whether rotor configuration or associated

Enhanced CAX Architecture, Design and Methodology - SPHINX (Architecture, definition et methodologie ameliorees des exercices assistes par ordinateur (CAX) - SPHINX)

DTIC Science & Technology

2016-08-01

REPORT TR-MSG-106 Enhanced CAX Architecture, Design and Methodology – SPHINX (Architecture, définition et méthodologie améliorées des exercices...STO TECHNICAL REPORT TR-MSG-106 Enhanced CAX Architecture, Design and Methodology – SPHINX (Architecture, définition et méthodologie...transition, application and field-testing, experimentation and a range of related scientific activities that include systems engineering, operational

Design, Performance, and Operation of Efficient Ramjet/Scramjet Combined Cycle Hypersonic Propulsion

DTIC Science & Technology

2009-10-16

simulations, the blending of the RANS and LES portions is handled by the standard DES equations, now referred to as DES97. The one-equation Spalart...think that RANS can capture these dynamics. • Much remains to be learned about how to model chemistry-turbulence interactions in scramjet flows...BILLIG, F. S., R. BAURLE, AND C. TAM 1999 Design and Analysis of Streamline Traced Hypersonic Inlets. AIAA Paper 1999-4974. BILLIG, F.S., AND

The Origin of Inlet Buzz in a Mach 1.7 Low Boom Inlet Design

NASA Technical Reports Server (NTRS)

Anderson, Bernhard H.; Weir, Lois

2014-01-01

Supersonic inlets with external compression, having a good level performance at the critical operating point, exhibit a marked instability of the flow in some subcritical operation below a critical value of the capture mass flow ratio. This takes the form of severe oscillations of the shock system, commonly known as "buzz". The underlying purpose of this study is to indicate how Detached Eddy Simulation (DES) analysis of supersonic inlets will alter how we envision unsteady inlet aerodynamics, particularly inlet buzz. Presented in this paper is a discussion regarding the physical explanation underlying inlet buzz as indicated by DES analysis. It is the normal shock wave boundary layer separation along the spike surface which reduces the capture mass flow that is the controlling mechanism which determines the onset of inlet buzz, and it is the aerodynamic characteristics of a choked nozzle that provide the feedback mechanism that sustains the buzz cycle by imposing a fixed mean corrected inlet weight flow. Comparisons between the DES analysis of the Lockheed Martin Corporation (LMCO) N+2 inlet and schlieren photographs taken during the test of the Gulfstream Large Scale Low Boom (LSLB) inlet in the NASA 8x6 ft. Supersonic Wind Tunnel (SWT) show a strong similarity both in turbulent flow field structure and shock wave formation during the buzz cycle. This demonstrates the value of DES analysis for the design and understanding of supersonic inlets.

Isotopic micro generators 1 volt; Les microgenerateurs radioisotopiques 1 volt (in French)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bomal, R.; Devin, B.; Delaquaize, P.

1969-07-01

Various configurations for electrical isotopic generators in the milliwatt range are investigated; these generators are not of the classical thermoelectric type. The four following energy conversion method are examined : thermionic, thermo-photovoltaic, radio-voltaic, wired thermoelectric. The calculus has been conducted having in view not the best energy conversion efficiency, but the need to attain directly 1 volt output voltage. High temperature {sup 238}Pu sources (T above 1000 ) are isolated by multi layer thermal insulation material of the Moly/Alumina type. Optimised application is given for number 1 and 2 here above. Thermionic is interesting by its compactness and Wired-thermoelectric ismore » cheap, simple and rugged. Both method do not allow to extend output voltage range far above 1 volt. TPV and RV, can be designed for multi volt application. Radio-voltaic is 1 per cent efficient but irradiation defects in the semiconductor induced by high energy radiations can strongly limit the lifetime of the generator. Isotope sources technology is the determining factor for these micro generators. (author) [French] Cette etude examine les types de generateurs electriques realisables a partir de sources isotopiques en dehors du procede thermoelectrique classique. Les quatre procedes suivants sont examines: thermoionique, thermophoto-voltaique, radiovoltaique, thermoelectrique a fils. Les calculs sont conduits sans souci exagere du rendement de conversion pour aboutir a une puissance electrique delivree de 0,2 a 1 mW sous une tension au moins egale a 1 volt. Le probleme des sources thermiques de {sup 238}Pu a haute temperature (T > 1000 C) est resolu avec une isolation a structure multi-couche moly-alumine. L'optimalisation est calculee en vue d'une utilisation dans les procedes 1 et 2. Le procede 1 est interessant par sa compacite et le procede 4 par sa simplicite, sa robustesse et son prix de revient; mais avec ces deux generateurs on ne peut obtenir plus d'un volt en charge. Les procedes 2 et 3 peuvent delivrer des tensions de plusieurs volts. Le radiovoltaique donne des rendements de 1 pour cent, mais la creation de defauts dans le reseau cristallin du semiconducteur avec les particules de grande energie peut limiter son utilisation. Les performances de ces differents modes de conversion sont conditionnees avant tout par les technologies des sources isotopiques. (auteur)« less

Analyse des interactions energetiques entre un arena et son systeme de refrigeration

NASA Astrophysics Data System (ADS)

Seghouani, Lotfi

La presente these s'inscrit dans le cadre d'un projet strategique sur les arenas finance par le CRSNG (Conseil de Recherche en Sciences Naturelles et en Genie du Canada) qui a pour but principal le developpement d'un outil numerique capable d'estimer et d'optimiser la consommation d'energie dans les arenas et curlings. Notre travail s'inscrit comme une suite a un travail deja realise par DAOUD et coll. (2006, 2007) qui a developpe un modele 3D (AIM) en regime transitoire de l'arena Camilien Houde a Montreal et qui calcule les flux de chaleur a travers l'enveloppe du batiment ainsi que les distributions de temperatures et d'humidite durant une annee meteorologique typique. En particulier, il calcule les flux de chaleur a travers la couche de glace dus a la convection, la radiation et la condensation. Dans un premier temps nous avons developpe un modele de la structure sous la glace (BIM) qui tient compte de sa geometrie 3D, des differentes couches, de l'effet transitoire, des gains de chaleur du sol en dessous et autour de l'arena etudie ainsi que de la temperature d'entree de la saumure dans la dalle de beton. Par la suite le BIM a ete couple le AIM. Dans la deuxieme etape, nous avons developpe un modele du systeme de refrigeration (REFSYS) en regime quasi-permanent pour l'arena etudie sur la base d'une combinaison de relations thermodynamiques, de correlations de transfert de chaleur et de relations elaborees a partir de donnees disponibles dans le catalogue du manufacturier. Enfin le couplage final entre l'AIM +BIM et le REFSYS a ete effectue sous l'interface du logiciel TRNSYS. Plusieurs etudes parametriques on ete entreprises pour evaluer les effets du climat, de la temperature de la saumure, de l'epaisseur de la glace, etc. sur la consommation energetique de l'arena. Aussi, quelques strategies pour diminuer cette consommation ont ete etudiees. Le considerable potentiel de recuperation de chaleur au niveau des condenseurs qui peut reduire l'energie requise par le systeme de ventilation de l'arena a ete mis en evidence. Mots cles. Arena, Systeme de refrigeration, Consommation d'energie, Efficacite energetique, Conduction au sol, Performance annuelle.

Kennedy Space Center Orion Processing Team Planning for Ground Operations

NASA Technical Reports Server (NTRS)

Letchworth, Gary; Schlierf, Roland

2011-01-01

Topics in this presentation are: Constellation Ares I/Orion/Ground Ops Elements Orion Ground Operations Flow Orion Operations Planning Process and Toolset Overview, including: 1 Orion Concept of Operations by Phase 2 Ops Analysis Capabilities Overview 3 Operations Planning Evolution 4 Functional Flow Block Diagrams 5 Operations Timeline Development 6 Discrete Event Simulation (DES) Modeling 7 Ground Operations Planning Document Database (GOPDb) Using Operations Planning Tools for Operability Improvements includes: 1 Kaizen/Lean Events 2 Mockups 3 Human Factors Analysis

Approaches to optimal aquifer management and intelligent control in a multiresolutional decision support system

NASA Astrophysics Data System (ADS)

Orr, Shlomo; Meystel, Alexander M.

2005-03-01

Despite remarkable new developments in stochastic hydrology and adaptations of advanced methods from operations research, stochastic control, and artificial intelligence, solutions of complex real-world problems in hydrogeology have been quite limited. The main reason is the ultimate reliance on first-principle models that lead to complex, distributed-parameter partial differential equations (PDE) on a given scale. While the addition of uncertainty, and hence, stochasticity or randomness has increased insight and highlighted important relationships between uncertainty, reliability, risk, and their effect on the cost function, it has also (a) introduced additional complexity that results in prohibitive computer power even for just a single uncertain/random parameter; and (b) led to the recognition in our inability to assess the full uncertainty even when including all uncertain parameters. A paradigm shift is introduced: an adaptation of new methods of intelligent control that will relax the dependency on rigid, computer-intensive, stochastic PDE, and will shift the emphasis to a goal-oriented, flexible, adaptive, multiresolutional decision support system (MRDS) with strong unsupervised learning (oriented towards anticipation rather than prediction) and highly efficient optimization capability, which could provide the needed solutions of real-world aquifer management problems. The article highlights the links between past developments and future optimization/planning/control of hydrogeologic systems. Malgré de remarquables nouveaux développements en hydrologie stochastique ainsi que de remarquables adaptations de méthodes avancées pour les opérations de recherche, le contrôle stochastique, et l'intelligence artificielle, solutions pour les problèmes complexes en hydrogéologie sont restées assez limitées. La principale raison est l'ultime confiance en les modèles qui conduisent à des équations partielles complexes aux paramètres distribués (PDE) à une échelle donnée. Alors que l'accumulation d'incertitudes et, par conséquent, la stockasticité ou l'aléat a augmenté la perspicacité et amis en lumière d'importantes relations entre l'incertitude, la fiabilité, le risque, et leur effet sur les coûts de fonctionnement, il a également (a) introduit une complexité additionnelle qui résulte dans un pouvoir prohibitif des moyens de calcul informatique même pour une simple estimation de l'incertitude; et (b) a conduita une reconnaissance de notre manque d'aptitude à maîtriser l'incertitude totale même en introduisant tous les paramètres connus de l'incertitude. La représentation du changement est introduit: une adaptation de nouvelles méthodes de contrôle intelligent qui va relâcher la dépendance à la rigidité des algorithmes, aux calculs informatiques intensifs, à la PDE stockastique, et qui modifiera l'emphase entre les MRDS—systèmes interactifs d'aide à la décision de multiresolutionelle (flexibles, adaptables et orientables selon les objectifs)—avec un fort apprentissage non (orienté vers l'anticipation plutôt que la prédiction), et une capacité d'optimisation efficiente très élevée, qui pourrait apporter le besoin de solutions pour la modélisation des problèmes de management des aquifères réalistes. Cet article met en lumière les liens entre les développements passés et les futurs moyens d'optimisation, de gestion et de contrôle des systèmes hydrogéologiques. A pesar de nuevos avances notables en hidrología estocástica y las adaptaciones de métodos avanzados de investigación de operaciones, control estocástico, e inteligencia artificial, las soluciones de problemas complejos del mundo real en hidrogeología han sido bastante limitadas. La principal razón es la dependencia definitiva en modelos de primer-principio que conducen a ecuaciones parciales diferencias de parámetro distribuido complejas (PDE) a una escala dada. Mientras que la adición de incertidumbre, y por lo tanto, estocasticidad o aleatoriedad ha incrementado la profundidad y resaltado relaciones importantes entre la incertidumbre, confiabilidad, riesgo, y su efecto en la función de costo, la adición también ha permitido (a) introducir complejidad adicional que resulta en potencia computacional excesiva aún para un solo parámetro incierto/aleatorio; y (b) llevar a reconocer nuestra discapacidad para evaluar la incertidumbre completa aún cuando se incluyen todos los parámetros inciertos. Se introduce un cambio paradigmático: una adaptación de nuevos métodos de control de inteligencia que relajarála dependencia en PDE estocásticas, rígidas y de uso computacional intensivo, cambiando el énfasis hacia un sistema de apoyo de decisiones de propósitos múltiples (MRDS) adaptivo, flexible, y orientadoa objetivos con fuerte aprendizaje sin supervisión (orientado a la anticipación más que a la predicción) con fuerte capacidad de optimización eficiente, lo cual podría aportar las soluciones necesarias a los problemas de manejo reales con los acuíferos. El artículo resalta los vínculos entre desarrollos pasados y control/planificación/optimización futura de sistemas hidrogeológicos.

Development of an Assessment Methodology for Demonstrating Usability, Technical Maturity, and Operational Benefits of Advanced Medical Technology (Developpement d’une Methodologie d’Evaluation Permettant de Demontrer la Facilite d’Utilisation, la Maturite Technique et les Avantages Operationnels des Technologies Medicales Evoluees)

DTIC Science & Technology

2010-09-01

de nations, que ce soit au sein de l’Alliance ou dans le cadre du Partenariat pour la paix, ont développé au cours des ...pour l’évacuation des blessés (CASEVAC). Certaines de ces technologies peuvent inclure en temps réel le contrôle de l’état du combattant/patient, la ...localisation du patient, le contrôle de l’état de la logistique médicale, ou encore l’établissement de rapports épidémiologiques. Le

Francis-99 turbine numerical flow simulation of steady state operation using RANS and RANS/LES turbulence model

NASA Astrophysics Data System (ADS)

Minakov, A.; Platonov, D.; Sentyabov, A.; Gavrilov, A.

2017-01-01

We performed numerical simulation of flow in a laboratory model of a Francis hydroturbine at three regimes, using two eddy-viscosity- (EVM) and a Reynolds stress (RSM) RANS models (realizable k-ɛ, k-ω SST, LRR) and detached-eddy-simulations (DES), as well as large-eddy simulations (LES). Comparison of calculation results with the experimental data was carried out. Unlike the linear EVMs, the RSM, DES, and LES reproduced well the mean velocity components, and pressure pulsations in the diffusor draft tube. Despite relatively coarse meshes and insufficient resolution of the near-wall region, LES, DES also reproduced well the intrinsic flow unsteadiness and the dominant flow structures and the associated pressure pulsations in the draft tube.

Microgenerateurs electriques a base d'oscillateurs thermiques

NASA Astrophysics Data System (ADS)

Leveille, Etienne

Dans un contexte de developpement durable et d'automatisation de notre environnement, l'utilisation de capteurs sans-fil distribues est croissante. Hors l'usage et le remplacement de piles s'avere couteux. La consommation energetique de plus en plus faible de l'electronique rend l'extraction energetique de l'energie ambiante envisageable. La chaleur residuelle est une source d'energie interessante puisqu'elle est la forme finale de la majeure partie de l'energie utilisee par l'humain. Cependant, a petite echelle, seuls les elements thermoelectriques sont disponibles. Les presents travaux s'interessent donc a explorer et comparer des mecanismes de generation alternatifs. Puisque la majorite des mecanismes de transduction alternatifs sont dynamiques, leur utilisation requiert une transformation de l'energie thermique continue en oscillations. Les mecanismes etudies ont donc tous en commun de posseder un oscillateur thermique en plus d'un mecanisme de transduction vers la forme d'energie electrique. Parmi les divers mecanismes identifies, deux sont etudies en details pour comprendre leurs comportements ainsi que connaitre leur efficacite et leur puissance potentielle. Le premier generateur etudie theoriquement est base sur le changement de ferromagnetisme d'une masse suspendue par des ressorts au-dessus d'un aimant. Les comportements du modele developpe correspondent aux comportements reportes dans la litterature. Deux parametres de conception principaux ont ete identifies, permettant un controle de la frequence, de la plage de temperatures d'operation. De plus le mecanisme peut operer avec de faibles differences de temperature et des temperatures proches de l'ambiant, ouvrant la porte a des applications utilisant la chaleur du corps humain. L'utilisation de materiau pyroelectrique comme mecanisme de transduction pourrait offrir des densites de puissance electrique envisageables de l'ordre de 1mW/cm3. Le second generateur etudie experimentalement est base sur l'evaporation explosive d'un liquide surchauffe en absence de sites de nucleation. Un premier prototype a permis de demontrer, pour la premiere fois, le fonctionnement d'un tel cycle. Une etude de l'effet de la temperature de la source de chaleur et de l'effet du debit de liquide montre qu'une zone d'operation ideale est presente. La puissance de sortie maximale mesuree est de l'ordre de 1.6muW. Des ameliorations sont proposees pour faire croitre cette puissance de deux ordres de grandeur. Finalement, l'utilisation du pompage capillaire pour rendre le systeme autonome est demontre, mais reste sensible aux variations de conditions. Finalement, l'etude des dispositifs montre que les microgenerateurs a base d'oscillateurs thermiques peuvent presenter un interet, par rapport aux elements thermoelectriques, dans les applications ou les temperatures sont faibles ou incertaines. Cependant, ces mecanismes souffrent d'une tres faible efficacite causee par les multiples transformations energetiques a faible couplage. Mots-cles : microgenerateur, oscillateur thermique, cycle thermodynamique, thermoelectricite, microsystemes electromecaniques, MEMS

Optimising the design and operation of semi-continuous affinity chromatography for clinical and commercial manufacture.

PubMed

Pollock, James; Bolton, Glen; Coffman, Jon; Ho, Sa V; Bracewell, Daniel G; Farid, Suzanne S

2013-04-05

This paper presents an integrated experimental and modelling approach to evaluate the potential of semi-continuous chromatography for the capture of monoclonal antibodies (mAb) in clinical and commercial manufacture. Small-scale single-column experimental breakthrough studies were used to derive design equations for the semi-continuous affinity chromatography system. Verification runs with the semi-continuous 3-column and 4-column periodic counter current (PCC) chromatography system indicated the robustness of the design approach. The product quality profiles and step yields (after wash step optimisation) achieved were comparable to the standard batch process. The experimentally-derived design equations were incorporated into a decisional tool comprising dynamic simulation, process economics and sizing optimisation. The decisional tool was used to evaluate the economic and operational feasibility of whole mAb bioprocesses employing PCC affinity capture chromatography versus standard batch chromatography across a product's lifecycle from clinical to commercial manufacture. The tool predicted that PCC capture chromatography would offer more significant savings in direct costs for early-stage clinical manufacture (proof-of-concept) (∼30%) than for late-stage clinical (∼10-15%) or commercial (∼5%) manufacture. The evaluation also highlighted the potential facility fit issues that could arise with a capture resin (MabSelect) that experiences losses in binding capacity when operated in continuous mode over lengthy commercial campaigns. Consequently, the analysis explored the scenario of adopting the PCC system for clinical manufacture and switching to the standard batch process following product launch. The tool determined the PCC system design required to operate at commercial scale without facility fit issues and with similar costs to the standard batch process whilst pursuing a process change application. A retrofitting analysis established that the direct cost savings obtained by 8 proof-of-concept batches would be sufficient to pay back the investment cost of the pilot-scale semi-continuous chromatography system. Copyright © 2013 Elsevier B.V. All rights reserved.

Critical induction a key quantity for the optimisation of transformer core operation

NASA Astrophysics Data System (ADS)

Ilo, A.; Pfützner, H.; Nakata, T.

2000-06-01

No-load losses P of transformers core have been considerably decreased through introduction of the so-called multi-step-lap designs. However, profound guidelines for the optimum step-number N do not exist. This study shows that the combination of both N and working induction B characterises the flux distribution. Transformer cores can operate in an over or an under-critical way depending on N and B.

Optimum design and operation of primary sludge fermentation schemes for volatile fatty acids production.

PubMed

Chanona, J; Ribes, J; Seco, A; Ferrer, J

2006-01-01

This paper presents a model-knowledge based algorithm for optimising the primary sludge fermentation process design and operation. This is a recently used method to obtain the volatile fatty acids (VFA), needed to improve biological nutrient removal processes, directly from the raw wastewater. The proposed algorithm consists in a heuristic reasoning algorithm based on the expert knowledge of the process. Only effluent VFA and the sludge blanket height (SBH) have to be set as design criteria, and the optimisation algorithm obtains the minimum return sludge and waste sludge flow rates which fulfil those design criteria. A pilot plant fed with municipal raw wastewater was operated in order to obtain experimental results supporting the developed algorithm groundwork. The experimental results indicate that when SBH was increased, higher solids retention time was obtained in the settler and VFA production increased. Higher recirculation flow-rates resulted in higher VFA production too. Finally, the developed algorithm has been tested by simulating different design conditions with very good results. It has been able to find the optimal operation conditions in all cases on which preset design conditions could be achieved. Furthermore, this is a general algorithm that can be applied to any fermentation-elutriation scheme with or without fermentation reactor.

A knowledge-based control system for air-scour optimisation in membrane bioreactors.

PubMed

Ferrero, G; Monclús, H; Sancho, L; Garrido, J M; Comas, J; Rodríguez-Roda, I

2011-01-01

Although membrane bioreactors (MBRs) technology is still a growing sector, its progressive implementation all over the world, together with great technical achievements, has allowed it to reach a mature degree, just comparable to other more conventional wastewater treatment technologies. With current energy requirements around 0.6-1.1 kWh/m3 of treated wastewater and investment costs similar to conventional treatment plants, main market niche for MBRs can be areas with very high restrictive discharge limits, where treatment plants have to be compact or where water reuse is necessary. Operational costs are higher than for conventional treatments; consequently there is still a need and possibilities for energy saving and optimisation. This paper presents the development of a knowledge-based decision support system (DSS) for the integrated operation and remote control of the biological and physical (filtration and backwashing or relaxation) processes in MBRs. The core of the DSS is a knowledge-based control module for air-scour consumption automation and energy consumption minimisation.

Advanced Beamformers for 3D Ultrasound Systems Deploying Linear and Planar Phased Array Probes

DTIC Science & Technology

2002-05-01

6tude sur la technologic d𔄀chographie 4D serviront de fondement important A l’innovation dans Ie secteur industriel canadien des dispositifs A...pouvant &tre utilis6 sur place A des fins de diagnostic. La technologie proposee comprend les travaux suivants: "* techniques de formation de faisceaux...faciliter l’imagerie durant les operations avec effraction minimale effectu6es sur place; "* concept d’impulsions A inversion temporelle pour les signaux

Advances in Components for Active and Passive Airborne Sensors (Progres des Composants pour les Systemes des Detection Active et Passive Aeroportes)

DTIC Science & Technology

1990-09-01

simplest form the modulators are systems. 1) The inter -band absorption edges at operated as non-resonant (single-pass) which the electro-absorption...transitions in -0111- 1,’. three different wavelength bands indicated. It is the NIR inter -band transition which is of interest in this E’l Iwork. 0...quartz crystal resonator is a vector quantity. 12 random vibration at 100 Hz away from the Therefore, the frequency during acceleration carrier. Of

Injury Prevention in Aircraft Crashes: Investigative Techniques and Applications (la Prevention des lesions lors des accidents d’ avions: les techniques d’investigation et leurs applications)

DTIC Science & Technology

1998-02-01

provide the aircrew and passengers with a level of protection commensurate with the risk of operating aircraft in the military and civilian...the time taken to reach peak acceleration and upon the peak acceleration level attained. Long duration acceleration, which can be experienced in...acceleration depends principally on the plateau level of the acceleration imposed on the body, as the response to long duration acceleration is due

Non-Cooperative Air Target Identification Using Radar (l’Identification radar des cibles aeriennes non cooperatives)

DTIC Science & Technology

1998-11-01

are already operational in the radar domain , e.g. in airborne radars. NATO fighter aircraft are equipped with transponder systems answering on...Mise en forme et 6talonnage des donn6es SER moyenne pour un domaine de fr6quence (bande passante du code utilis6) et un secteur Ce module extrait les...cooperatives) Papers presented at the Symposium of the RTO Systems Concepts and Integration Panel (SCI) held in Mannheim, Germany, 22-24 April 1998. 1

CONTRACT Study - CONservative TReatment of Appendicitis in Children (feasibility): study protocol for a randomised controlled Trial.

PubMed

Hutchings, Natalie; Wood, Wendy; Reading, Isabel; Walker, Erin; Blazeby, Jane M; Van't Hoff, William; Young, Bridget; Crawley, Esther M; Eaton, Simon; Chorozoglou, Maria; Sherratt, Frances C; Beasant, Lucy; Corbett, Harriet; Stanton, Michael P; Grist, Simon; Dixon, Elizabeth; Hall, Nigel J

2018-03-02

Currently, the routine treatment for acute appendicitis in the United Kingdom is an appendicectomy. However, there is increasing scientific interest and research into non-operative treatment of appendicitis in adults and children. While a number of studies have investigated non-operative treatment of appendicitis in adults, this research cannot be applied to the paediatric population. Ultimately, we aim to perform a UK-based multicentre randomised controlled trial (RCT) to test the clinical and cost effectiveness of non-operative treatment of acute uncomplicated appendicitis in children, as compared with appendicectomy. First, we will undertake a feasibility study to assess the feasibility of performing such a trial. The study involves a feasibility RCT with a nested qualitative research to optimise recruitment as well as a health economic substudy. Children (aged 4-15 years inclusive) diagnosed with acute uncomplicated appendicitis that would normally be treated with an appendicectomy are eligible for the RCT. Exclusion criteria include clinical/radiological suspicion of perforated appendicitis, appendix mass or previous non-operative treatment of appendicitis. Participants will be randomised into one of two arms. Participants in the intervention arm are treated with antibiotics and regular clinical assessment to ensure clinical improvement. Participants in the control arm will receive appendicectomy. Randomisation will be minimised by age, sex, duration of symptoms and centre. Children and families who are approached for the RCT will be invited to participate in the embedded qualitative substudy, which includes recording of recruitment consultants and subsequent interviews with participants and non-participants and their families and recruiters. Analyses of these will inform interventions to optimise recruitment. The main study outcomes include recruitment rate (primary outcome), identification of strategies to optimise recruitment, performance of trial treatment pathways, clinical outcomes and safety of non-operative treatment. We have involved children, young people and parents in study design and delivery. In this study we will explore the feasibility of performing a full efficacy RCT comparing non-operative treatment with appendicectomy in children with acute uncomplicated appendicitis. Factors determining success of the present study include recruitment rate, safety of non-operative treatment and adequate interest in the future RCT. Ultimately this feasibility study will form the foundation of the main RCT and reinforce its design. ISRCTN15830435 . Registered on 8 February 2017.

Effect of pulsed laser light in patients with dry eye syndrome.

PubMed

Guilloto Caballero, S; García Madrona, J L; Colmenero Reina, E

2017-11-01

The objective of this study was to determine the clinical benefits of pulsed light therapy for the treatment of Dry Eye Syndrome (DES) due to the decrease in aqueous tear production (aqueous deficient DES) and/or excessive tear evaporation (evaporative DES) due to Meibomian Gland Dysfunction (MGD). A study was conducted on 72 eyes corresponding to 36 patients with DES. Out of these 72 eyes, 60 underwent refractive surgery (48 with femtosecond laser, 6 were operated with a mechanical microkeratome, and 6 with refractive photo-keratectomy[RPK], 6 treated with phacoemulsification, and 6 with no previous surgical treatment. Pulsed laser light (Intense Pulsed Light Regulated [IRPL ® ]) was use to stimulate the secretion of the Meibomian glands during 4 sessions, one every 15 days. Patients with aqueous deficient DES did not show any improvement. Eyes with no previous surgery and those treated with phacoemulsification and PRK had a favourable outcome. On the other hand, less conclusive results were observed in the eyes treated with excimer laser. This treatment could be very helpful to treat evaporative DES produced by MGD. On the other hand, it is not helpful for those cases related to an isolated damage in the aqueous phase, or the mucin phase. Copyright © 2017 Sociedad Española de Oftalmología. Publicado por Elsevier España, S.L.U. All rights reserved.

Instrumental Response Model and Detrending for the Dark Energy Camera

DOE PAGES

Bernstein, G. M.; Abbott, T. M. C.; Desai, S.; ...

2017-09-14

We describe the model for mapping from sky brightness to the digital output of the Dark Energy Camera (DECam) and the algorithms adopted by the Dark Energy Survey (DES) for inverting this model to obtain photometric measures of celestial objects from the raw camera output. This calibration aims for fluxes that are uniform across the camera field of view and across the full angular and temporal span of the DES observations, approaching the accuracy limits set by shot noise for the full dynamic range of DES observations. The DES pipeline incorporates several substantive advances over standard detrending techniques, including principal-components-based sky and fringe subtraction; correction of the "brighter-fatter" nonlinearity; use of internal consistency in on-sky observations to disentangle the influences of quantum efficiency, pixel-size variations, and scattered light in the dome flats; and pixel-by-pixel characterization of instrument spectral response, through combination of internal-consistency constraints with auxiliary calibration data. This article provides conceptual derivations of the detrending/calibration steps, and the procedures for obtaining the necessary calibration data. Other publications will describe the implementation of these concepts for the DES operational pipeline, the detailed methods, and the validation that the techniques can bring DECam photometry and astrometry withinmore » $$\\approx 2$$ mmag and $$\\approx 3$$ mas, respectively, of fundamental atmospheric and statistical limits. In conclusion, the DES techniques should be broadly applicable to wide-field imagers.« less

Instrumental Response Model and Detrending for the Dark Energy Camera

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bernstein, G. M.; Abbott, T. M. C.; Desai, S.

We describe the model for mapping from sky brightness to the digital output of the Dark Energy Camera (DECam) and the algorithms adopted by the Dark Energy Survey (DES) for inverting this model to obtain photometric measures of celestial objects from the raw camera output. This calibration aims for fluxes that are uniform across the camera field of view and across the full angular and temporal span of the DES observations, approaching the accuracy limits set by shot noise for the full dynamic range of DES observations. The DES pipeline incorporates several substantive advances over standard detrending techniques, including principal-components-based sky and fringe subtraction; correction of the "brighter-fatter" nonlinearity; use of internal consistency in on-sky observations to disentangle the influences of quantum efficiency, pixel-size variations, and scattered light in the dome flats; and pixel-by-pixel characterization of instrument spectral response, through combination of internal-consistency constraints with auxiliary calibration data. This article provides conceptual derivations of the detrending/calibration steps, and the procedures for obtaining the necessary calibration data. Other publications will describe the implementation of these concepts for the DES operational pipeline, the detailed methods, and the validation that the techniques can bring DECam photometry and astrometry withinmore » $$\\approx 2$$ mmag and $$\\approx 3$$ mas, respectively, of fundamental atmospheric and statistical limits. In conclusion, the DES techniques should be broadly applicable to wide-field imagers.« less

Revetements nanostructures pour la protection des metaux dans les environnements marins

NASA Astrophysics Data System (ADS)

Brassard, Jean-Denis

L'objectif de cette recherche est de verifier qu'un materiau superhydrophobe peut diminuer l'adherence et l'accumulation de la glace tout en conservant de bonnes proprietes anticorrosion. Afin de verifier cette assertion, trois familles de nouveaux revetements micros et nanostructures, identifiees par les lettres A, B, et C, ont ete developpes de facon a pouvoir en determiner l'efficacite glaciophobe en relation avec l'angle de contact particulier a chaque structure obtenue. Les revetements ont tous ete optimises pour que l'angle de contact et l'adherence au substrat soient maximaux. Les trois revetements optimises sont les suivants: Le revetement A a ete developpe pour application sur l'acier galvanise. Les microrugosites creees sont celles de la structure de la couche du zinc electrodepose en surface et les nanorugosites sont celles creees par le film de silicone copolymerise nanostructure. Un temps optimal de 10 min a ete retenu pour l'electrodeposition du zinc, ce dernier maximisant l'angle de contact a 155° lorsqu'enduit d'un film de silicone de 100 nm d'epaisseur. Le revetement B a ete developpe pour application sur un alliage d'aluminium. Les microrugosites creees sont celles de la microstructure granulaire obtenue par gravure de l'aluminium immerge dans un bain de HCl et les nanorugosites sont celles creees d'un meme film nanostructure de silicone copolymerise. La valeur optimale du temps de gravure est de 8 minutes et donne l'angle de contact le plus eleve a 154°, lorsqu'enduit du meme film de silicone de 100 nm d'epaisseur depose sur le revetement A. Le revetement C a ete developpe pour etre applique indifferemment sur tout substrat degraisse d'aluminium ou d'acier. Les microrugosites et les nanorugosites sont celles creees par les agregats de nanoparticules de ZnO rendues hydrophobes melangees au silicone qui sont pulverisees sur une couche d'appret composee de silicone et de polymethylhydrosiloxane. On obtient alors un produit composite rigide ou les nanoparticules de ZnO enrobees de silane sont imbriquees dans le reseau nanostructure de silicone copolymerise. Le revetement C produit de cette facon satisfaisait a la norme ASTM d'adherence a un substrat, mais n'est pas superhydrophobe, restant seulement hydrophobe avec un angle de contact reduit de 123°. Tous les revetements optimises developpes montrent un niveau de resistance a la corrosion beaucoup plus eleve que leur substrat tant en polarisation qu'en impedance electrochimique. Toutefois aucune relation entre l'hydrophobicite et le niveau de resistance a la corrosion n'a ete etablie. Il a seulement ete determine que ce sont la nature chimique de l'interface, a savoir ses proprietes electriques en isolation, son hydrophobicite et la presence d'air, de meme que l'epaisseur qui sont les deux aspects essentiels a respecter pour avoir de bonnes proprietes anticorrosion. Les trois revetements A, B, et C ont ete evalues quant a la reduction d'adherence et d'accumulation evaluee dans les environnements givrants rencontres en mer arctique. En premiere position, le revetement superhydrophobe B avec un angle de contact de 154°et un facteur de reduction l'adherence (ARF) de la glace sur l'aluminium de 14 et de la quantite accumulee 5% moindre. En seconde position, le revetement superhydrophobe A avec un angle de contact de 155° et un facteur ARF de 6, lequel n'a pas ete evalue en accumulation; et en troisieme position le revetement hydrophobe C avec un facteur de reduction de 3, lequel ne reduit pas la masse de glace accumulee. Deux mecanismes ont ete trouves responsables de l'adherence a la glace sur les revetements developpes soient: 1. l'effet d'ancrage diminue par la presence de nanorugosites hydrophobes recouvrant les microrugosites pouvant adsorber de l'air et 2. L'effet de la quantite d'air adsorbe dans la structure de l'interface, a savoir que pour des angles de contact egaux, si la quantite d'air augmente dans la microstructure, donc un Rrms plus eleve, ferait que l'adherence serait diminuee. Le fait que le revetement B possede un ARF plus eleve que le revetement A, alors qu'ils ont un angle de contact semblable, a 1° pres, est explique par le fait que la valeur des hauteurs des microrugosites Rrms y est plus elevee. Les essais d'accumulation en embruns marins ont permis d'observer que le revetement superhydrophobe accumulait moins de glace que ceux hydrophobe et hydrophile. Cette diminution peut s'expliquer par le fait que les gouttelettes d'eau surfondues vont rouler sans y adherer a cause de la nature superhydrophobe. (Abstract shortened by ProQuest.).

Optimisation of logistics processes of energy grass collection

NASA Astrophysics Data System (ADS)

Bányai, Tamás.

2010-05-01

The collection of energy grass is a logistics-intensive process [1]. The optimal design and control of transportation and collection subprocesses is a critical point of the supply chain. To avoid irresponsible decisions by right of experience and intuition, the optimisation and analysis of collection processes based on mathematical models and methods is the scientific suggestible way. Within the frame of this work, the author focuses on the optimisation possibilities of the collection processes, especially from the point of view transportation and related warehousing operations. However the developed optimisation methods in the literature [2] take into account the harvesting processes, county-specific yields, transportation distances, erosion constraints, machinery specifications, and other key variables, but the possibility of more collection points and the multi-level collection were not taken into consideration. The possible areas of using energy grass is very wide (energetically use, biogas and bio alcohol production, paper and textile industry, industrial fibre material, foddering purposes, biological soil protection [3], etc.), so not only a single level but also a multi-level collection system with more collection and production facilities has to be taken into consideration. The input parameters of the optimisation problem are the followings: total amount of energy grass to be harvested in each region; specific facility costs of collection, warehousing and production units; specific costs of transportation resources; pre-scheduling of harvesting process; specific transportation and warehousing costs; pre-scheduling of processing of energy grass at each facility (exclusive warehousing). The model take into consideration the following assumptions: (1) cooperative relation among processing and production facilties, (2) capacity constraints are not ignored, (3) the cost function of transportation is non-linear, (4) the drivers conditions are ignored. The objective function of the optimisation is the maximisation of the profit which means the maximization of the difference between revenue and cost. The objective function trades off the income of the assigned transportation demands against the logistic costs. The constraints are the followings: (1) the free capacity of the assigned transportation resource is more than the re-quested capacity of the transportation demand; the calculated arrival time of the transportation resource to the harvesting place is not later than the requested arrival time of them; (3) the calculated arrival time of the transportation demand to the processing and production facility is not later than the requested arrival time; (4) one transportation demand is assigned to one transportation resource and one resource is assigned to one transportation resource. The decision variable of the optimisation problem is the set of scheduling variables and the assignment of resources to transportation demands. The evaluation parameters of the optimised system are the followings: total costs of the collection process; utilisation of transportation resources and warehouses; efficiency of production and/or processing facilities. However the multidimensional heuristic optimisation method is based on genetic algorithm, but the routing sequence of the optimisation works on the base of an ant colony algorithm. The optimal routes are calculated by the aid of the ant colony algorithm as a subroutine of the global optimisation method and the optimal assignment is given by the genetic algorithm. One important part of the mathematical method is the sensibility analysis of the objective function, which shows the influence rate of the different input parameters. Acknowledgements This research was implemented within the frame of the project entitled "Development and operation of the Technology and Knowledge Transfer Centre of the University of Miskolc". with support by the European Union and co-funding of the European Social Fund. References [1] P. R. Daniel: The Economics of Harvesting and Transporting Corn Stover for Conversion to Fuel Ethanol: A Case Study for Minnesota. University of Minnesota, Department of Applied Economics. 2006. http://ideas.repec.org/p/ags/umaesp/14213.html [2] T. G. Douglas, J. Brendan, D. Erin & V.-D. Becca: Energy and Chemicals from Native Grasses: Production, Transportation and Processing Technologies Considered in the Northern Great Plains. University of Minnesota, Department of Applied Economics. 2006. http://ideas.repec.org/p/ags/umaesp/13838.html [3] Homepage of energygrass. www.energiafu.hu

International online support to process optimisation and operation decisions.

PubMed

Onnerth, T B; Eriksson, J

2002-01-01

The information level at all technical facilities has developed from almost nothing 30-40 years ago to advanced IT--Information Technology--systems based on both chemical and mechanical on-line sensors for process and equipment. Still the basic part of information is to get the right data at the right time for the decision to be made. Today a large amount of operational data is available at almost any European wastewater treatment plant, from laboratory and SCADA. The difficult part is to determine which data to keep, which to use in calculations and how and where to make data available. With the STARcontrol system it is possible to separate only process relevant data to use for on-line control and reporting at engineering level, to optimise operation. Furthermore, the use of IT makes it possible to communicate internationally, with full access to the whole amount of data on the single plant. In this way, expert supervision can be both very local in local language e.g. Polish and at the same time very professional with Danish experts advising on Danish processes in Poland or Sweden where some of the 12 STARcontrol systems are running.

Application of snakes and dynamic programming optimisation technique in modeling of buildings in informal settlement areas

NASA Astrophysics Data System (ADS)

Rüther, Heinz; Martine, Hagai M.; Mtalo, E. G.

This paper presents a novel approach to semiautomatic building extraction in informal settlement areas from aerial photographs. The proposed approach uses a strategy of delineating buildings by optimising their approximate building contour position. Approximate building contours are derived automatically by locating elevation blobs in digital surface models. Building extraction is then effected by means of the snakes algorithm and the dynamic programming optimisation technique. With dynamic programming, the building contour optimisation problem is realized through a discrete multistage process and solved by the "time-delayed" algorithm, as developed in this work. The proposed building extraction approach is a semiautomatic process, with user-controlled operations linking fully automated subprocesses. Inputs into the proposed building extraction system are ortho-images and digital surface models, the latter being generated through image matching techniques. Buildings are modeled as "lumps" or elevation blobs in digital surface models, which are derived by altimetric thresholding of digital surface models. Initial windows for building extraction are provided by projecting the elevation blobs centre points onto an ortho-image. In the next step, approximate building contours are extracted from the ortho-image by region growing constrained by edges. Approximate building contours thus derived are inputs into the dynamic programming optimisation process in which final building contours are established. The proposed system is tested on two study areas: Marconi Beam in Cape Town, South Africa, and Manzese in Dar es Salaam, Tanzania. Sixty percent of buildings in the study areas have been extracted and verified and it is concluded that the proposed approach contributes meaningfully to the extraction of buildings in moderately complex and crowded informal settlement areas.

Predicting emergency coronary artery bypass graft following PCI: application of a computational model to refer patients to hospitals with and without onsite surgical backup

PubMed Central

Syed, Zeeshan; Moscucci, Mauro; Share, David; Gurm, Hitinder S

2015-01-01

Background Clinical tools to stratify patients for emergency coronary artery bypass graft (ECABG) after percutaneous coronary intervention (PCI) create the opportunity to selectively assign patients undergoing procedures to hospitals with and without onsite surgical facilities for dealing with potential complications while balancing load across providers. The goal of our study was to investigate the feasibility of a computational model directly optimised for cohort-level performance to predict ECABG in PCI patients for this application. Methods Blue Cross Blue Shield of Michigan Cardiovascular Consortium registry data with 69 pre-procedural and angiographic risk variables from 68 022 PCI procedures in 2004–2007 were used to develop a support vector machine (SVM) model for ECABG. The SVM model was optimised for the area under the receiver operating characteristic curve (AUROC) at the level of the training cohort and validated on 42 310 PCI procedures performed in 2008–2009. Results There were 87 cases of ECABG (0.21%) in the validation cohort. The SVM model achieved an AUROC of 0.81 (95% CI 0.76 to 0.86). Patients in the predicted top decile were at a significantly increased risk relative to the remaining patients (OR 9.74, 95% CI 6.39 to 14.85, p<0.001) for ECABG. The SVM model optimised for the AUROC on the training cohort significantly improved discrimination, net reclassification and calibration over logistic regression and traditional SVM classification optimised for univariate performance. Conclusions Computational risk stratification directly optimising cohort-level performance holds the potential of high levels of discrimination for ECABG following PCI. This approach has value in selectively referring PCI patients to hospitals with and without onsite surgery. PMID:26688738

Modelisation et optimisation des systemes energetiques a l'aide d'algorithmes evolutifs

NASA Astrophysics Data System (ADS)

Hounkonnou, Sessinou M. William

Optimization of thermal and nuclear plant has many economics advantages as well as environmentals. Therefore new operating points research and use of new tools to achieve those kind of optimization are the subject of many studies. In this momentum, this project is intended to optimize energetic systems precisely the secondary loop of Gentilly 2 nuclear plant using both the extraction of the high and low pressure turbine as well as the extraction of the mixture coming from the steam generator. A detailed thermodynamic model of the various equipment of the secondary loop such as the feed water heaters, the moisture separator-reheater, the dearator, the condenser and the turbine is carried out. We use Matlab software (version R2007b, 2007) with the library for the thermodynamic properties of water and steam (XSteam pour Matlab, Holmgren, 2006). A model of the secondary loop is than obtained thanks to the assembly of the different equipments. A simulation of the equipment and the complete cycle enabled us to release two objectifs functions knowing as the net output and the efficiency which evolve in an opposite way according to the variation of the extractions. Due to the complexity of the problem, we use a method based on the genetic algorithms for the optimization. More precisely we used a tool which was developed at the "Institut de genie nucleaire" named BEST (Boundary Exploration Search Technique) developed in VBA* (Visual BASIC for Application) for its ability to converge more quickly and to carry out a more exhaustive search at the border of the optimal solutions. The use of the DDE (Dynamic Data Exchange) enables us to link the simulator and the optimizer. The results obtained show us that they still exists several combinations of extractions which make it possible to obtain a better point of operation for the improvement of the performance of Gentilly 2 power station secondary loop. *Trademark of Microsoft

Moral, Ethical and Legal Considerations with the Use of Drugs for Performance Maintenance in the Canadian Forces

DTIC Science & Technology

2009-10-01

Operations (Science, Technology and Ethics) (Amelioration des performances humaines dans les operations militaires de l’OTAN (Science, Technologie et Ethique...Virtually all sovereign nations have at some time in their history administered capital punishment for religious, cultural, and political beliefs

The Energy-Efficient Quarry: Towards improved understanding and optimisation of energy use and minimisation of CO2 generation in the aggregates industry.

NASA Astrophysics Data System (ADS)

Hill, Ian; White, Toby; Owen, Sarah

2014-05-01

Extraction and processing of rock materials to produce aggregates is carried out at some 20,000 quarries across the EU. All stages of the processing and transport of hard and dense materials inevitably consume high levels of energy and have consequent significant carbon footprints. The FP7 project "the Energy Efficient Quarry" (EE-Quarry) has been addressing this problem and has devised strategies, supported by modelling software, to assist the quarrying industry to assess and optimise its energy use, and to minimise its carbon footprint. Aggregate quarries across Europe vary enormously in the scale of the quarrying operations, the nature of the worked mineral, and the processing to produce a final market product. Nevertheless most quarries involve most or all of a series of essential stages; deposit assessment, drilling and blasting, loading and hauling, and crushing and screening. The process of determining the energy-efficiency of each stage is complex, but is broadly understood in principle and there are numerous sources of information and guidance available in the literature and on-line. More complex still is the interaction between each of these stages. For example, using a little more energy in blasting to increase fragmentation may save much greater energy in later crushing and screening, but also generate more fines material which is discarded as waste and the embedded energy in this material is lost. Thus the calculation of the embedded energy in the waste material becomes an input to the determination of the blasting strategy. Such feedback loops abound in the overall quarry optimisation. The project has involved research and demonstration operations at a number of quarries distributed across Europe carried out by all partners in the EE-Quarry project, working in collaboration with many of the major quarrying companies operating in the EU. The EE-Quarry project is developing a sophisticated modelling tool, the "EE-Quarry Model" available to the quarrying industry on a web-based platform. This tool guides quarry managers and operators through the complex, multi-layered, iterative, process of assessing the energy efficiency of their own quarry operation. They are able to evaluate the optimisation of the energy-efficiency of the overall quarry through examining both the individual stages of processing, and the interactions between them. The project is also developing on-line distance learning modules designed for Continuous Professional Development (CPD) activities for staff across the quarrying industry in the EU and beyond. The presentation will describe development of the model, and the format and scope of the resulting software tool and its user-support available to the quarrying industry.

Optimisation of follow-up after metabolic surgery.

PubMed

Mingrone, Geltrude; Bornstein, Stefan; Le Roux, Carel W

2018-06-01

Bariatric surgery has many benefits beyond weight loss, including improved control of glycaemia, blood pressure, and dyslipidaemia; hence, such surgery has been rebranded as metabolic surgery. The operations are, unfortunately, also associated with major surgical and medical complications. The medical complications include gastro-oesophageal reflux disease, malnutrition, and metabolic complications deriving from vitamin and mineral malabsorption. The benefits of surgery can be optimised by implementing specific protocols before and after surgery. In this Review, we discuss the assessment of the risk of major cardiac complications and severe obstructive sleep apnoea before surgery, and the provision of adequate lifelong postsurgery nutritional, vitamin, and mineral supplementation to reduce complications. Additionally, we examine the best antidiabetic medications to reduce the risk of hypoglycaemia after gastric bypass and sleeve gastrectomy, and the strategies to improve weight loss or reduce weight regain. Although optimising clinical pathways is possible to maximise metabolic benefits and reduce the risks of complications and micronutrient deficiencies, evolution of these strategies can further improve the risk-to-benefit ratio of metabolic surgery. Copyright © 2018 Elsevier Ltd. All rights reserved.

Speckle-based at-wavelength metrology of X-ray mirrors with super accuracy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kashyap, Yogesh; Wang, Hongchang; Sawhney, Kawal, E-mail: kawal.sawhney@diamond.ac.uk

2016-05-15

X-ray active mirrors, such as bimorph and mechanically bendable mirrors, are increasingly being used on beamlines at modern synchrotron source facilities to generate either focused or “tophat” beams. As well as optical tests in the metrology lab, it is becoming increasingly important to optimise and characterise active optics under actual beamline operating conditions. Recently developed X-ray speckle-based at-wavelength metrology technique has shown great potential. The technique has been established and further developed at the Diamond Light Source and is increasingly being used to optimise active mirrors. Details of the X-ray speckle-based at-wavelength metrology technique and an example of its applicabilitymore » in characterising and optimising a micro-focusing bimorph X-ray mirror are presented. Importantly, an unprecedented angular sensitivity in the range of two nanoradians for measuring the slope error of an optical surface has been demonstrated. Such a super precision metrology technique will be beneficial to the manufacturers of polished mirrors and also in optimization of beam shaping during experiments.« less

Floating-to-Fixed-Point Conversion for Digital Signal Processors

NASA Astrophysics Data System (ADS)

Menard, Daniel; Chillet, Daniel; Sentieys, Olivier

2006-12-01

Digital signal processing applications are specified with floating-point data types but they are usually implemented in embedded systems with fixed-point arithmetic to minimise cost and power consumption. Thus, methodologies which establish automatically the fixed-point specification are required to reduce the application time-to-market. In this paper, a new methodology for the floating-to-fixed point conversion is proposed for software implementations. The aim of our approach is to determine the fixed-point specification which minimises the code execution time for a given accuracy constraint. Compared to previous methodologies, our approach takes into account the DSP architecture to optimise the fixed-point formats and the floating-to-fixed-point conversion process is coupled with the code generation process. The fixed-point data types and the position of the scaling operations are optimised to reduce the code execution time. To evaluate the fixed-point computation accuracy, an analytical approach is used to reduce the optimisation time compared to the existing methods based on simulation. The methodology stages are described and several experiment results are presented to underline the efficiency of this approach.

A catalyst layer optimisation approach using electrochemical impedance spectroscopy for PEM fuel cells operated with pyrolysed transition metal-N-C catalysts

NASA Astrophysics Data System (ADS)

Malko, Daniel; Lopes, Thiago; Ticianelli, Edson A.; Kucernak, Anthony

2016-08-01

The effect of the ionomer to carbon (I/C) ratio on the performance of single cell polymer electrolyte fuel cells is investigated for three different types of non-precious metal cathodic catalysts. Polarisation curves as well as impedance spectra are recorded at different potentials in the presence of argon or oxygen at the cathode and hydrogen at the anode. It is found that a optimised ionomer content is a key factor for improving the performance of the catalyst. Non-optimal ionomer loading can be assessed by two different factors from the impedance spectra. Hence this observation could be used as a diagnostic element to determine the ideal ionomer content and distribution in newly developed catalyst-electrodes. An electrode morphology based on the presence of inhomogeneous resistance distribution within the porous structure is suggested to explain the observed phenomena. The back-pressure and relative humidity effect on this feature is also investigated and supports the above hypothesis. We give a simple flowchart to aid optimisation of electrodes with the minimum number of trials.

Zipf's Law of Abbreviation and the Principle of Least Effort: Language users optimise a miniature lexicon for efficient communication.

PubMed

Kanwal, Jasmeen; Smith, Kenny; Culbertson, Jennifer; Kirby, Simon

2017-08-01

The linguist George Kingsley Zipf made a now classic observation about the relationship between a word's length and its frequency; the more frequent a word is, the shorter it tends to be. He claimed that this "Law of Abbreviation" is a universal structural property of language. The Law of Abbreviation has since been documented in a wide range of human languages, and extended to animal communication systems and even computer programming languages. Zipf hypothesised that this universal design feature arises as a result of individuals optimising form-meaning mappings under competing pressures to communicate accurately but also efficiently-his famous Principle of Least Effort. In this study, we use a miniature artificial language learning paradigm to provide direct experimental evidence for this explanatory hypothesis. We show that language users optimise form-meaning mappings only when pressures for accuracy and efficiency both operate during a communicative task, supporting Zipf's conjecture that the Principle of Least Effort can explain this universal feature of word length distributions. Copyright © 2017 Elsevier B.V. All rights reserved.

Caractérisation de l'état de surface et des contraintes résiduelles engendrées par meulage

NASA Astrophysics Data System (ADS)

Gognau, D.; Blehaut, H.; Dürr, J.; Hariri, S.; Khouchaf, L.; Flahaut, P.

2002-07-01

grinding operations are generally used to prepare surfaces or improve surface state before or after welding. These operations, when carried out manually with portable machines, induce superficial work hardening, modification of the structure of material and residual stresses. An experimental study about the influence of grinding has been carried out on two metallic materials, a low carbon steel (A42-CP) and an austenitic stainless steel (316L), in order to characterise the grinding effects. Manual grinding being difficult to control (no repeatable effects), a test rig using a portable machine has been made. This test rig enables to control the grinding parameters in order to obtain repeatable grinding operations. Characterisation of the ground surfaces was made by 2D profilometry and measurements of residual stresses have been carried out with a Set-X Elphyse apparatus. The profiles of residual stresses obtained show, on the one hand, that on each material, identical grindings generate identical states of stresses and on the other hand, that materials have not the same behaviour, From a metallurgical point of view, we also observe that the grinding effects are different for both materials. The grinding of the A42 steel highlights a crushing of the grain near the surface while the 316L stainless steel grinding reveals sliding bands. Des opérations de meulage sont régulièrement effectuées sur des matériaux métalliques pour préparer les surfaces ou pour améliorer l'état de ces surfaces après soudage. Ces opérations réalisées manuellement engendrent un écrouissage superficiel, une modification de la structure du matériau et par conséquent des contraintes résiduelles. Une étude expérimentale a été menée sur un acier à bas carbone (A42-CP) et un acier inoxydable austénitique (316L) afin de caractériser les effets du meulage. Le meulage manuel étant difficile à maîtriser (effets non reproductibles), un banc d'essai utilisant une machine portative a été réalisé afin de contrôler les différents paramètres caractéristiques des opérations de meulage. Ensuite, la détermination de la rugosité des surfaces meulées s'est faite par profilornétrie 2D et les contraintes résiduelles ont été mesurées sur un appareil Set-X Elphyse. Les profils de contraintes obtenus montrent d'une part que sur un même matériau, des meulages réalisés dans les mêmes conditions aboutissent à des résultats semblables et d'autre part, que les deux matériaux utilises se comportent différemment. Ainsi, d'un point de vue métallurgique, on observe que le meulage de l'acier A42 favorise un écrasement des grains proches de la surface alors que le meulage de l'acier inoxydable 316L fait apparaître de nombreuses bandes de glissement.

Using operational data to estimate the reliable yields of water-supply wells

NASA Astrophysics Data System (ADS)

Misstear, Bruce D. R.; Beeson, Sarah

The reliable yield of a water-supply well depends on many different factors, including the properties of the well and the aquifer; the capacities of the pumps, raw-water mains, and treatment works; the interference effects from other wells; and the constraints imposed by ion licences, water quality, and environmental issues. A relatively simple methodology for estimating reliable yields has been developed that takes into account all of these factors. The methodology is based mainly on an analysis of water-level and source-output data, where such data are available. Good operational data are especially important when dealing with wells in shallow, unconfined, fissure-flow aquifers, where actual well performance may vary considerably from that predicted using a more analytical approach. Key issues in the yield-assessment process are the identification of a deepest advisable pumping water level, and the collection of the appropriate well, aquifer, and operational data. Although developed for water-supply operators in the United Kingdom, this approach to estimating the reliable yields of water-supply wells using operational data should be applicable to a wide range of hydrogeological conditions elsewhere. Résumé La productivité d'un puits capté pour l'adduction d'eau potable dépend de différents facteurs, parmi lesquels les propriétés du puits et de l'aquifère, la puissance des pompes, le traitement des eaux brutes, les effets d'interférences avec d'autres puits et les contraintes imposées par les autorisations d'exploitation, par la qualité des eaux et par les conditions environnementales. Une méthodologie relativement simple d'estimation de la productivité qui prenne en compte tous ces facteurs a été mise au point. Cette méthodologie est basée surtout sur une analyse des données concernant le niveau piézométrique et le débit de prélèvement, quand ces données sont disponibles. De bonnes données opérationnelles sont particulièrement importantes quand il s'agit de puits dans des aquifères fissurés, libres et peu profonds, dans lesquels la performance réelle d'un puits peut varier considérablement de celle prédite à partir d'une approche plus analytique. Des données essentielles dans les processus d'estimation de la productivité sont l'identification d'un niveau piézométrique de pompage le plus profond possible et le recueil de données opérationnelles appropriées concernant le puits et l'aquifère. Bien qu'elle ait été développée pour des opérateurs gérant des captages en Grande-Bretagne, cette approche de l'estimation de la productivité des puits de captage d'eau potable à partir de données opérationnelles peut être appliquée à une large gamme de conditions hydrogéologiques en d'autres lieux. Resumen La productividad de un pozo de abastecimiento depende de varios factores, entre los que se incluyen las propiedades del pozo y del acuífero, la capacidad de la bomba, las obras de mantenimiento, la interferencia de otras captaciones y las restricciones impuestas por permisos legales, calidad del agua y aspectos ambientales. Se ha desarrollado una metodología relativamente simple para estimar la productividad de un pozo teniendo en cuenta todos los factores previamente mencionados. Esta metodología se basa principalmente en el análisis de niveles y caudales cuando estos datos están disponibles. Se requieren buenos datos de operación, principalmente cuando el pozo está situado en un acuífero de poco espesor, no confinado y en medio fracturado, donde la respuesta del sistema puede diferir enormemente de la predicción analítica. Un punto destacado en el estudio de productividad es la identificación del descenso máximo admisible. Aunque desarrollada para el Reino Unido, la metodología puede ser utilizada a un amplio rango de condiciones hidrogeológicas en otras zonas del mundo.

Optimisation of Critical Infrastructure Protection: The SiVe Project on Airport Security

NASA Astrophysics Data System (ADS)

Breiing, Marcus; Cole, Mara; D'Avanzo, John; Geiger, Gebhard; Goldner, Sascha; Kuhlmann, Andreas; Lorenz, Claudia; Papproth, Alf; Petzel, Erhard; Schwetje, Oliver

This paper outlines the scientific goals, ongoing work and first results of the SiVe research project on critical infrastructure security. The methodology is generic while pilot studies are chosen from airport security. The outline proceeds in three major steps, (1) building a threat scenario, (2) development of simulation models as scenario refinements, and (3) assessment of alternatives. Advanced techniques of systems analysis and simulation are employed to model relevant airport structures and processes as well as offences. Computer experiments are carried out to compare and optimise alternative solutions. The optimality analyses draw on approaches to quantitative risk assessment recently developed in the operational sciences. To exploit the advantages of the various techniques, an integrated simulation workbench is build up in the project.

Rurality Index for Small Areas in Spain

ERIC Educational Resources Information Center

Ocana-Riola, Ricardo; Sanchez-Cantalejo, Carmen

2005-01-01

An operational definition for "rural area" is pivotal if proposals, policies and decisions aimed at optimising the distribution of resources, closing the gap on inequity between areas and raising standards of living for the least advantaged populations are to be put in place. The concept of rurality, however, is often based on…

Ocean Thermal Analysis and Related Naval Operational Considerations in the Ionian Sea - June 1980.

DTIC Science & Technology

1981-09-01

oceanography and XBT sampl- ing procedures are made. 4 RESUME L’analyse synoptique de la mer Ionienne en Juin 1980 r~v~le des structures thermiques...varides, et en particulier, un tourbillon chaud comparable en taille et position A celui trouv6 aui cours de MILOC-68. Les fonctions de corr~1ation...spatiale en temp~rature sont anisotropiques dans la partie sud, avec des 6chelles respectives de 30 et 40 A 80 km dans les directions Est/Quest et Nord/Sud

Adaptability in Coalition Teamwork (Facultes d’adaptation au travail d’equipe en coalition)

DTIC Science & Technology

2008-04-01

principaux résultats des 30 communications théoriques et de recherche ont été les suivants : • Les outils de formation (jeux, simulations) fonctionnent...militaires ; • Le retour d’information sur le moral et les performances des équipes en opérations est un instrument qui est particulièrement apprécié...during operations is an instrument that is highly valued by commanders in the field; and • Differences in language proficiency in English confound

Application of Mössbauer spectroscopy on corrosion products of NPP

NASA Astrophysics Data System (ADS)

Dekan, J.; Lipka, J.; Slugeň, V.

2013-04-01

Steam generator (SG) is generally one of the most important components at all nuclear power plants (NPP) with close impact to safe and long-term operation. Material degradation and corrosion/erosion processes are serious risks for long-term reliable operation. Steam generators of four VVER-440 units at nuclear power plants V-1 and V-2 in Jaslovske Bohunice (Slovakia) were gradually changed by new original "Bohunice" design in period 1994-1998, in order to improve corrosion resistance of SGs. Corrosion processes before and after these design and material changes in Bohunice secondary circuit were studied using Mössbauer spectroscopy during last 25 years. Innovations in the feed water pipeline design as well as material composition improvements were evaluated positively. Mössbauer spectroscopy studies of phase composition of corrosion products were performed on real specimens scrapped from water pipelines or in form of filters deposits. Newest results in our long-term corrosion study confirm good operational experiences and suitable chemical regimes (reduction environment) which results mostly in creation of magnetite (on the level 70 % or higher) and small portions of hematite, goethite or hydrooxides. Regular observation of corrosion/erosion processes is essential for keeping NPP operation on high safety level. The output from performed material analyses influences the optimisation of operating chemical regimes and it can be used in optimisation of regimes at decontamination and passivation of pipelines or secondary circuit components. It can be concluded that a longer passivation time leads more to magnetite fraction in the corrosion products composition.

The Dark Energy Survey Data Release 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abbott, T.M.C.; et al.

We describe the first public data release of the Dark Energy Survey, DES DR1, consisting of reduced single epoch images, coadded images, coadded source catalogs, and associated products and services assembled over the first three years of DES science operations. DES DR1 is based on optical/near-infrared imaging from 345 distinct nights (August 2013 to February 2016) by the Dark Energy Camera mounted on the 4-m Blanco telescope at Cerro Tololo Inter-American Observatory in Chile. We release data from the DES wide-area survey covering ~5,000 sq. deg. of the southern Galactic cap in five broad photometric bands, grizY. DES DR1 hasmore » a median delivered point-spread function of g = 1.12, r = 0.96, i = 0.88, z = 0.84, and Y = 0.90 arcsec FWHM, a photometric precision of < 1% in all bands, and an astrometric precision of 151 mas. The median coadded catalog depth for a 1.95" diameter aperture at S/N = 10 is g = 24.33, r = 24.08, i = 23.44, z = 22.69, and Y = 21.44 mag. DES DR1 includes nearly 400M distinct astronomical objects detected in ~10,000 coadd tiles of size 0.534 sq. deg. produced from ~39,000 individual exposures. Benchmark galaxy and stellar samples contain ~310M and ~ 80M objects, respectively, following a basic object quality selection. These data are accessible through a range of interfaces, including query web clients, image cutout servers, jupyter notebooks, and an interactive coadd image visualization tool. DES DR1 constitutes the largest photometric data set to date at the achieved depth and photometric precision.« less

Cost accounting in a surgical unit in a teaching hospital--a pilot study.

PubMed

Malalasekera, A P; Ariyaratne, M H; Fernando, R; Perera, D; Deen, K I

2003-09-01

Economic constraints remain one of the major limitations on the quality of health care even in industrialised countries. Improvement of quality will require optimising facilities within available resources. Our objective was to determine costs of surgery and to identify areas where cost reduction is possible. 80 patients undergoing routine major and intermediate surgery during a period of 6 months were selected at random. All consumables used and procedures carried out were documented. A unit cost was assigned to each of these. Costing was based on 3 main categories: preoperative (investigations, blood product related costs), operative (anaesthetic charges, consumables and theatre charges) and post-operative (investigations, consumables, hospital stay). Theatre charges included two components: fixed (consumables) and variable (dependent on time per operation). The indirect costs (e.g. administration costs, 'hotel' costs), accounted for 30%, of the total and were lower than similar costs in industrialised nations. The largest contributory factors (median, range) towards total cost were, basic hospital charges (30%; 15 to 63%); theatre charges fixed (23%; 6 to 35%) and variable (14%; 8 to 27%); and anaesthetic charges (15%; 1 to 36%). Cost reduction in patients undergoing surgery should focus on decreasing hospital stay, operating theatre time and anaesthetic expenditure. Although definite measures can be suggested from the study, further studies on these variables are necessary to optimise cost effectiveness of surgical units.

Cost evaluation to optimise radiation therapy implementation in different income settings: A time-driven activity-based analysis.

PubMed

Van Dyk, Jacob; Zubizarreta, Eduardo; Lievens, Yolande

2017-11-01

With increasing recognition of growing cancer incidence globally, efficient means of expanding radiotherapy capacity is imperative, and understanding the factors impacting human and financial needs is valuable. A time-driven activity-based costing analysis was performed, using a base case of 2-machine departments, with defined cost inputs and operating parameters. Four income groups were analysed, ranging from low to high income. Scenario analyses included department size, operating hours, fractionation, treatment complexity, efficiency, and centralised versus decentralised care. The base case cost/course is US$5,368 in HICs, US$2,028 in LICs; the annual operating cost is US$4,595,000 and US$1,736,000, respectively. Economies of scale show cost/course decreasing with increasing department size, mainly related to the equipment cost and most prominent up to 3 linacs. The cost in HICs is two or three times as high as in U-MICs or LICs, respectively. Decreasing operating hours below 8h/day has a dramatic impact on the cost/course. IMRT increases the cost/course by 22%. Centralising preparatory activities has a moderate impact on the costs. The results indicate trends that are useful for optimising local and regional circumstances. This methodology can provide input into a uniform and accepted approach to evaluating the cost of radiotherapy. Copyright © 2017 The Author(s). Published by Elsevier B.V. All rights reserved.

A pragmatic multi-centre randomised controlled trial of fluid loading and level of dependency in high-risk surgical patients undergoing major elective surgery: trial protocol

PubMed Central

2010-01-01

Background Patients undergoing major elective or urgent surgery are at high risk of death or significant morbidity. Measures to reduce this morbidity and mortality include pre-operative optimisation and use of higher levels of dependency care after surgery. We propose a pragmatic multi-centre randomised controlled trial of level of dependency and pre-operative fluid therapy in high-risk surgical patients undergoing major elective surgery. Methods/Design A multi-centre randomised controlled trial with a 2 * 2 factorial design. The first randomisation is to pre-operative fluid therapy or standard regimen and the second randomisation is to routine intensive care versus high dependency care during the early post-operative period. We intend to recruit 204 patients undergoing major elective and urgent abdominal and thoraco-abdominal surgery who fulfil high-risk surgical criteria. The primary outcome for the comparison of level of care is cost-effectiveness at six months and for the comparison of fluid optimisation is the number of hospital days after surgery. Discussion We believe that the results of this study will be invaluable in determining the future care and clinical resource utilisation for this group of patients and thus will have a major impact on clinical practice. Trial Registration Trial registration number - ISRCTN32188676 PMID:20398378

The use of surrogates for an optimal management of coupled groundwater-agriculture hydrosystems

NASA Astrophysics Data System (ADS)

Grundmann, J.; Schütze, N.; Brettschneider, M.; Schmitz, G. H.; Lennartz, F.

2012-04-01

For ensuring an optimal sustainable water resources management in arid coastal environments, we develop a new simulation based integrated water management system. It aims at achieving best possible solutions for groundwater withdrawals for agricultural and municipal water use including saline water management together with a substantial increase of the water use efficiency in irrigated agriculture. To achieve a robust and fast operation of the management system regarding water quality and water quantity we develop appropriate surrogate models by combining physically based process modelling with methods of artificial intelligence. Thereby we use an artificial neural network for modelling the aquifer response, inclusive the seawater interface, which was trained on a scenario database generated by a numerical density depended groundwater flow model. For simulating the behaviour of high productive agricultural farms crop water production functions are generated by means of soil-vegetation-atmosphere-transport (SVAT)-models, adapted to the regional climate conditions, and a novel evolutionary optimisation algorithm for optimal irrigation scheduling and control. We apply both surrogates exemplarily within a simulation based optimisation environment using the characteristics of the south Batinah region in the Sultanate of Oman which is affected by saltwater intrusion into the coastal aquifer due to excessive groundwater withdrawal for irrigated agriculture. We demonstrate the effectiveness of our methodology for the evaluation and optimisation of different irrigation practices, cropping pattern and resulting abstraction scenarios. Due to contradicting objectives like profit-oriented agriculture vs. aquifer sustainability a multi-criterial optimisation is performed.

Efficient and portable acceleration of quantum chemical many-body methods in mixed floating point precision using OpenACC compiler directives

NASA Astrophysics Data System (ADS)

Eriksen, Janus J.

2017-09-01

It is demonstrated how the non-proprietary OpenACC standard of compiler directives may be used to compactly and efficiently accelerate the rate-determining steps of two of the most routinely applied many-body methods of electronic structure theory, namely the second-order Møller-Plesset (MP2) model in its resolution-of-the-identity approximated form and the (T) triples correction to the coupled cluster singles and doubles model (CCSD(T)). By means of compute directives as well as the use of optimised device math libraries, the operations involved in the energy kernels have been ported to graphics processing unit (GPU) accelerators, and the associated data transfers correspondingly optimised to such a degree that the final implementations (using either double and/or single precision arithmetics) are capable of scaling to as large systems as allowed for by the capacity of the host central processing unit (CPU) main memory. The performance of the hybrid CPU/GPU implementations is assessed through calculations on test systems of alanine amino acid chains using one-electron basis sets of increasing size (ranging from double- to pentuple-ζ quality). For all but the smallest problem sizes of the present study, the optimised accelerated codes (using a single multi-core CPU host node in conjunction with six GPUs) are found to be capable of reducing the total time-to-solution by at least an order of magnitude over optimised, OpenMP-threaded CPU-only reference implementations.

Application of response surface methodology to optimise supercritical carbon dioxide extraction of volatile compounds from Crocus sativus.

PubMed

Shao, Qingsong; Huang, Yuqiu; Zhou, Aicun; Guo, Haipeng; Zhang, Ailian; Wang, Yong

2014-05-01

Crocus sativus has been used as a traditional Chinese medicine for a long time. The volatile compounds of C. sativus appear biologically active and may act as antioxidants as well as anticonvulsants, antidepressants and antitumour agents. In order to obtain the highest possible yield of essential oils from C. sativus, response surface methodology was employed to optimise the conditions of supercritical fluid carbon dioxide extraction of the volatile compounds from C. sativus. Four factorswere investigated: temperature, pressure, extraction time and carbon dioxide flow rate. Furthermore, the chemical compositions of the volatile compounds extracted by supercritical fluid extraction were compared with those obtained by hydro-distillation and Soxhlet extraction. The optimum extraction conditions were found to be: optimised temperature 44.9°C, pressure 34.9 MPa, extraction time 150.2 min and CO₂ flow rate 10.1 L h⁻¹. Under these conditions, the mean extraction yield was 10.94 g kg⁻¹. The volatile compounds extracted by supercritical fluid extraction and Soxhlet extraction contained a large amount of unsaturated fatty acids. Response surface methodology was successfully applied for supercritical fluid CO₂ extraction optimisation of the volatile compounds from C. sativus. The study showed that pressure and CO₂ flow rate had significant effect on volatile compounds yield produced by supercritical fluid extraction. This study is beneficial for the further research operating on a large scale. © 2013 Society of Chemical Industry.

Assay optimisation and technology transfer for multi-site immuno-monitoring in vaccine trials

PubMed Central

Harris, Stephanie A.; Satti, Iman; Bryan, Donna; Walker, K. Barry; Dockrell, Hazel M.; McShane, Helen; Ho, Mei Mei

2017-01-01

Cellular immunological assays are important tools for the monitoring of responses to T-cell-inducing vaccine candidates. As these bioassays are often technically complex and require considerable experience, careful technology transfer between laboratories is critical if high quality, reproducible data that allows comparison between sites, is to be generated. The aim of this study, funded by the European Union Framework Program 7-funded TRANSVAC project, was to optimise Standard Operating Procedures and the technology transfer process to maximise the reproducibility of three bioassays for interferon-gamma responses: enzyme-linked immunosorbent assay (ELISA), ex-vivo enzyme-linked immunospot and intracellular cytokine staining. We found that the initial variability in results generated across three different laboratories reduced following a combination of Standard Operating Procedure harmonisation and the undertaking of side-by-side training sessions in which assay operators performed each assay in the presence of an assay ‘lead’ operator. Mean inter-site coefficients of variance reduced following this training session when compared with the pre-training values, most notably for the ELISA assay. There was a trend for increased inter-site variability at lower response magnitudes for the ELISA and intracellular cytokine staining assays. In conclusion, we recommend that on-site operator training is an essential component of the assay technology transfer process and combined with harmonised Standard Operating Procedures will improve the quality, reproducibility and comparability of data produced across different laboratories. These data may be helpful in ongoing discussions of the potential risk/benefit of centralised immunological assay strategies for large clinical trials versus decentralised units. PMID:29020010

Improving Vector Evaluated Particle Swarm Optimisation by Incorporating Nondominated Solutions

PubMed Central

Lim, Kian Sheng; Ibrahim, Zuwairie; Buyamin, Salinda; Ahmad, Anita; Naim, Faradila; Ghazali, Kamarul Hawari; Mokhtar, Norrima

2013-01-01

The Vector Evaluated Particle Swarm Optimisation algorithm is widely used to solve multiobjective optimisation problems. This algorithm optimises one objective using a swarm of particles where their movements are guided by the best solution found by another swarm. However, the best solution of a swarm is only updated when a newly generated solution has better fitness than the best solution at the objective function optimised by that swarm, yielding poor solutions for the multiobjective optimisation problems. Thus, an improved Vector Evaluated Particle Swarm Optimisation algorithm is introduced by incorporating the nondominated solutions as the guidance for a swarm rather than using the best solution from another swarm. In this paper, the performance of improved Vector Evaluated Particle Swarm Optimisation algorithm is investigated using performance measures such as the number of nondominated solutions found, the generational distance, the spread, and the hypervolume. The results suggest that the improved Vector Evaluated Particle Swarm Optimisation algorithm has impressive performance compared with the conventional Vector Evaluated Particle Swarm Optimisation algorithm. PMID:23737718

Improving Vector Evaluated Particle Swarm Optimisation by incorporating nondominated solutions.

PubMed

Lim, Kian Sheng; Ibrahim, Zuwairie; Buyamin, Salinda; Ahmad, Anita; Naim, Faradila; Ghazali, Kamarul Hawari; Mokhtar, Norrima

2013-01-01

The Vector Evaluated Particle Swarm Optimisation algorithm is widely used to solve multiobjective optimisation problems. This algorithm optimises one objective using a swarm of particles where their movements are guided by the best solution found by another swarm. However, the best solution of a swarm is only updated when a newly generated solution has better fitness than the best solution at the objective function optimised by that swarm, yielding poor solutions for the multiobjective optimisation problems. Thus, an improved Vector Evaluated Particle Swarm Optimisation algorithm is introduced by incorporating the nondominated solutions as the guidance for a swarm rather than using the best solution from another swarm. In this paper, the performance of improved Vector Evaluated Particle Swarm Optimisation algorithm is investigated using performance measures such as the number of nondominated solutions found, the generational distance, the spread, and the hypervolume. The results suggest that the improved Vector Evaluated Particle Swarm Optimisation algorithm has impressive performance compared with the conventional Vector Evaluated Particle Swarm Optimisation algorithm.

Action Learning, Team Learning and Co-Operation in the Czech Republic

ERIC Educational Resources Information Center

Kubatova, Slava

2012-01-01

This account of practice presents two cases of the application of Action Learning (AL) communication methodology as described by Marquardt [2004. "Optimising the power of action learning". Mountain View, CA: Davies-Black Publishing]. The teams were Czech and international top management teams. The AL methodology was used to improve…

Optimisation of Copper Oxide Impregnation on Carbonised Oil Palm Empty Fruit Bunch for Nitric Oxide Removal using Response Surface Methodology

NASA Astrophysics Data System (ADS)

Ahmad, Norhidayah; Yong, Sing Hung; Ibrahim, Naimah; Ali, Umi Fazara Md; Ridwan, Fahmi Muhammad; Ahmad, Razi

2018-03-01

Oil palm empty fruit bunch (EFB) was successfully modified with phosphoric acid hydration followed by impregnation with copper oxide (CuO) to synthesize CuO modified catalytic carbon (CuO/EFBC) for low-temperature removal of nitric oxide (NO) from gas streams. CuO impregnation was optimised through response surface methodology (RSM) using Box-Behnken Design (BBD) in terms of metal loading (5-20%), sintering temperature (200-800˚C) and sintering time (2-6 hours). The model response for the variables was NO adsorption capacity, which was obtained from an up-flow column adsorption experiment with 100 mL/min flow of 500 ppm NO/He at different operating conditions. The optimum operating variables suggested by the model were 20% metal loading, 200˚C sintering temperature and 6 hours sintering time. A good agreement (R2 = 0.9625) was achieved between the experimental data and model prediction. ANOVA analysis indicated that the model terms (metal loading and sintering temperature) are significant (Prob.>F less than 0.05).

Payload Instrument Design Rules for Safe and Efficient Flight Operations

NASA Astrophysics Data System (ADS)

Montagnon, E.; Ferri, P.

2004-04-01

Payload operations are often being neglected in favour of optimisation of scientific performance of the instrument design. This has major drawbacks in terms of cost, safety, efficiency of operations and finally science return. By taking operational aspects into account in the early phases of the instrument design, with a minimum more cultural than financial or technological additional effort, many problems can be avoided or minimized, with significant benefits to be gained in the mission execution phases. This paper presents possible improvements based on the use of the telemetry and telecommand packet standard, proper sharing of autonomy functions between instrument and platform, and enhanced interface documents.

Critical review of membrane bioreactor models--part 1: biokinetic and filtration models.

PubMed

Naessens, W; Maere, T; Nopens, I

2012-10-01

Membrane bioreactor technology exists for a couple of decades, but has not yet overwhelmed the market due to some serious drawbacks of which operational cost due to fouling is the major contributor. Knowledge buildup and optimisation for such complex systems can significantly benefit from mathematical modelling. In this paper, the vast literature on modelling MBR biokinetics and filtration is critically reviewed. It was found that models cover the wide range of empirical to detailed mechanistic descriptions and have mainly been used for knowledge development and to a lesser extent for system optimisation/control. Moreover, studies are still predominantly performed at lab or pilot scale. Trends are discussed, knowledge gaps identified and interesting routes for further research suggested. Copyright © 2012 Elsevier Ltd. All rights reserved.

Optimisation Issues of High Throughput Medical Data and Video Streaming Traffic in 3G Wireless Environments.

PubMed

Istepanian, R S H; Philip, N

2005-01-01

In this paper we describe some of the optimisation issues relevant to the requirements of high throughput of medical data and video streaming traffic in 3G wireless environments. In particular we present a challenging 3G mobile health care application that requires a demanding 3G medical data throughput. We also describe the 3G QoS requirement of mObile Tele-Echography ultra-Light rObot system (OTELO that is designed to provide seamless 3G connectivity for real-time ultrasound medical video streams and diagnosis from a remote site (robotic and patient station) manipulated by an expert side (specialists) that is controlling the robotic scanning operation and presenting a real-time feedback diagnosis using 3G wireless communication links.

Design of High Frequency Pulse Tube Cryocooler for Onboard Space Applications

NASA Astrophysics Data System (ADS)

Srikanth, Thota; Padmanabhan; Gurudath, C. S.; Amrit, A.; Basavaraj, S.; Dinesh, K.

2017-02-01

To meet the growing demands of on-board applications such as cooling meteorological payloads and the satellite operational constraints like power, lower mass, reduced size and redundancy; a Pulse Tube Cryocooler (PTC) is designed by arriving at an operating frequency of 100 Hz and Helium gas pressure of 35 bar based on insights obtained from combination of phasor diagram, pulse tube and regenerator geometries with overall system mass of ≤ 2.0 kg. High frequency operation would allow reducing the size and mass of pressure wave modulator for a given input power. High Frequency also helps in reducing the volume of regenerator for a given cooling power, which increases the power density and leads to faster cool down. A component level modelling of the regenerator for optimising length and diameter for maximum Coefficient of Performance (COP) is carried out using REGEN3.3. The overall system level modelling of PTC is carried out using 1-D software SAGE. The cold end mass flow rate of the optimised regenerator is taken as reference for the system modelling. The performance achieved in REGEN3.3 is 2.15 W of net heat lift against the performance of 1.02 W of net heat lift at 80 K in SAGE.

Application of an automation system and a supervisory control and data acquisition (SCADA) system for the optimal operation of a membrane adsorption hybrid system.

PubMed

Smith, P J; Vigneswaran, S; Ngo, H H; Nguyen, H T; Ben-Aim, R

2006-01-01

The application of automation and supervisory control and data acquisition (SCADA) systems to municipal water and wastewater treatment plants is rapidly increasing. However, the application of these systems is less frequent in the research and development phases of emerging treatment technologies used in these industries. This study involved the implementation of automation and a SCADA system to the submerged membrane adsorption hybrid system for use in a semi-pilot scale research project. An incremental approach was used in the development of the automation and SCADA systems, leading to the development of two new control systems. The first system developed involved closed loop control of the backwash initiation, based upon a pressure increase, leading to productivity improvements as the backwash is only activated when required, not at a fixed time. This system resulted in a 40% reduction in the number of backwashes required and also enabled optimised operations under unsteady concentrations of wastewater. The second system developed involved closed loop control of the backwash duration, whereby the backwash was terminated when the pressure reached a steady state. This system resulted in a reduction of the duration of the backwash of up to 25% and enabled optimised operations as the foulant build-up within the reactor increased.

INCOMMANDS TDP: Human Factors Design and Evaluation Guide (PDT INCOMMANDS: Guide de Conception et d’Evaluation des Facteurs Humains)

DTIC Science & Technology

2009-12-01

Human-Computer Interface (AHCI) Style Guide, (Report No. 64201-97U/61223), Veridian, Veda Operations, Dayton Ohio. [13] CSFAB Osga, G. and Kellmeyer, D...Interface (AHCI) Style Guide, (Report No. 64201-97U/61223), Veridian, Veda Operations, Dayton Ohio. [14] Osga, G. and Kellmeyer, D. (2000), Combat

Neural network feedforward control of a closed-circuit wind tunnel

NASA Astrophysics Data System (ADS)

Sutcliffe, Peter

Accurate control of wind-tunnel test conditions can be dramatically enhanced using feedforward control architectures which allow operating conditions to be maintained at a desired setpoint through the use of mathematical models as the primary source of prediction. However, as the desired accuracy of the feedforward prediction increases, the model complexity also increases, so that an ever increasing computational load is incurred. This drawback can be avoided by employing a neural network that is trained offline using the output of a high fidelity wind-tunnel mathematical model, so that the neural network can rapidly reproduce the predictions of the model with a greatly reduced computational overhead. A novel neural network database generation method, developed through the use of fractional factorial arrays, was employed such that a neural network can accurately predict wind-tunnel parameters across a wide range of operating conditions whilst trained upon a highly efficient database. The subsequent network was incorporated into a Neural Network Model Predictive Control (NNMPC) framework to allow an optimised output schedule capable of providing accurate control of the wind-tunnel operating parameters. Facilitation of an optimised path through the solution space is achieved through the use of a chaos optimisation algorithm such that a more globally optimum solution is likely to be found with less computational expense than the gradient descent method. The parameters associated with the NNMPC such as the control horizon are determined through the use of a Taguchi methodology enabling the minimum number of experiments to be carried out to determine the optimal combination. The resultant NNMPC scheme was employed upon the Hessert Low Speed Wind Tunnel at the University of Notre Dame to control the test-section temperature such that it follows a pre-determined reference trajectory during changes in the test-section velocity. Experimental testing revealed that the derived NNMPC controller provided an excellent level of control over the test-section temperature in adherence to a reference trajectory even when faced with unforeseen disturbances such as rapid changes in the operating environment.

Bulk-modified modified screen-printing carbon electrodes with both lactate oxidase (LOD) and horseradish peroxide (HRP) for the determination of L-lactate in flow injection analysis mode.

PubMed

Ghamouss, Fouad; Ledru, Sophie; Ruillé, Nadine; Lantier, Françoise; Boujtita, Mohammed

2006-06-16

A screen-printed carbon electrode modified with both HRP and LOD (SPCE-HRP/LOD) has been developed for the determination of L-lactate concentration in real samples. The resulting SPCE-HRP/LOD was prepared in a one-step procedure, and was then optimised as an amperometric biosensor operating at [0, -100]mV versus Ag/AgCl for L-lactate determination in flow injection mode. A significant improvement in the reproducibility (coefficient variation of about 10%) of the preparation of the biosensors was obtained when graphite powder was modified with LOD in the presence of HRP previously oxidised by periodate ion (IO4-). Optimisation studies were performed by examining the effects of LOD loading, periodation step and rate of the binder on analytical performances of SPCE-HRP/LOD. The sensitivity of the optimised SPCE-HRP/LOD to L-lactate was 0.84 nAL micromol(-1) in a detection range between 10 and 180 microMol. The possibility of using the developed biosensor to determine L-lactate concentrations in various dairy products was also evaluated.

Infrastructure optimisation via MBR retrofit: a design guide.

PubMed

Bagg, W K

2009-01-01

Wastewater management is continually evolving with the development and implementation of new, more efficient technologies. One of these is the Membrane Bioreactor (MBR). Although a relatively new technology in Australia, MBR wastewater treatment has been widely used elsewhere for over 20 years, with thousands of MBRs now in operation worldwide. Over the past 5 years, MBR technology has been enthusiastically embraced in Australia as a potential treatment upgrade option, and via retrofit typically offers two major benefits: (1) more capacity using mostly existing facilities, and (2) very high quality treated effluent. However, infrastructure optimisation via MBR retrofit is not a simple or low-cost solution and there are many factors which should be carefully evaluated before deciding on this method of plant upgrade. The paper reviews a range of design parameters which should be carefully evaluated when considering an MBR retrofit solution. Several actual and conceptual case studies are considered to demonstrate both advantages and disadvantages. Whilst optimising existing facilities and production of high quality water for reuse are powerful drivers, it is suggested that MBRs are perhaps not always the most sustainable Whole-of-Life solution for a wastewater treatment plant upgrade, especially by way of a retrofit.

Ontology-based coupled optimisation design method using state-space analysis for the spindle box system of large ultra-precision optical grinding machine

NASA Astrophysics Data System (ADS)

Wang, Qianren; Chen, Xing; Yin, Yuehong; Lu, Jian

2017-08-01

With the increasing complexity of mechatronic products, traditional empirical or step-by-step design methods are facing great challenges with various factors and different stages having become inevitably coupled during the design process. Management of massive information or big data, as well as the efficient operation of information flow, is deeply involved in the process of coupled design. Designers have to address increased sophisticated situations when coupled optimisation is also engaged. Aiming at overcoming these difficulties involved in conducting the design of the spindle box system of ultra-precision optical grinding machine, this paper proposed a coupled optimisation design method based on state-space analysis, with the design knowledge represented by ontologies and their semantic networks. An electromechanical coupled model integrating mechanical structure, control system and driving system of the motor is established, mainly concerning the stiffness matrix of hydrostatic bearings, ball screw nut and rolling guide sliders. The effectiveness and precision of the method are validated by the simulation results of the natural frequency and deformation of the spindle box when applying an impact force to the grinding wheel.

Basie Instrumentation of a Low Speed Axial Compressor

NASA Astrophysics Data System (ADS)

Blidi, Sami; Miton, Hubert

1995-07-01

The flow modelling depending on test results allows a best aerodynamic comprehension. For this reason, a test bed of L.E.M.F.I.'s axial compressor has been set and instrumented for a detailed exploration of the flow in a four-stage turbomachine characterised by a little spacing between blade rows. In this paper, first are given brief descriptions of the geometrical characteristics of this compressor, the test bed's control system operation and the instrumentation set. Next, measures for the exploration of flow are discussed. Finally, typical results concerning the global and local performance measurements and their analysis are presented. This work permitted to instrument the L.E.M.F.I.'s four-stage axial compressor test bed and obtain the flow steady and unsteady characteristics using the five-hole and hot film probes. Les études de modélisation de l'écoulement dans les compresseurs axiaux doivent s'appuyer sur des résultats expérimentaux permettant une meilleure compréhension des phénomènes aérodynamiques et convenant à la validation des codes numériques. À cette fin, un banc d'essais de compresseur axial basse vitesse a été rais au point et instrumenté au L.E.M.F.I.[1] pour des explorations détaillées de l'écoulement dans une machine comportant 4étages, caractérisée par le faible espacement entre les rangées d'aubages. Dans cet article, nous décrivons brièvement les caractéristiques géométriques du compresseur axial, les systèmes de contrôle du fonctionnement du banc d'essais et l'instrumentation mise au point. Nous parlons ensuite des moyens d'explorations de l'écoulement utilisés. Nous fournissons enfin des exemples de résultats de mesure des performances globales et locales du compresseur et analysons brièvement ces résultats. Le travail effectué a permis de mettre au point et d'instrumenter un banc d'essais de compresseur axial basse vitesse au L.E.M.F.I. et rendu possible la détermination des grandeurs stationnaires et instationnaires de l'écoulement entre les rangées d'aubages en utilisant des sondes clinométriques de pression et des sondes à films chauds.

Validation Data for Mechanical System Algorithms Used in Building Energy Analysis Programs.

DTIC Science & Technology

1982-02-01

15 Zone Design 15 Built-Up Air Handler 15 Ventilation Requirements 16 The DES 16 Duct Design 17 Air -Delivery System 17 VAV Operation 17 Constant Volume...observed to operate well at reduced air flows, even at low flow in the so- called surge region. Recommendations 1. The HVAC system and component...With Inlet Guide Vanes Operating Within a Built-Up Air Handler 31 Test 2 -- Boiler Operation, Capacity, Efficiency, and Stand-By Losses 32 Test 3

Reseaux Neuronaux Optiques

NASA Astrophysics Data System (ADS)

Bergeron, Alain

Cette recherche vise a la mise en oeuvre optique de reseaux neuronaux. Deux architectures differentes sont proposees. La premiere est la memoire associative permettant d'associer a un objet quelconque une sortie arbitraire tout en preservant l'information sur sa position. La seconde architecture, le classificateur neuronal pour le controle robotique, permet l'identification d'une entree et son classement selon differentes categories. La sortie est compatible avec les systemes numeriques standard. Pour realiser ces architectures, une approche modulaire est privilegiee. Le correlateur constitue le module de base des realisations. Differents modules sont de plus introduits pour realiser convenablement les operations neuronales. Le premier de ces modules est le seuil optoelectronique permettant de realiser une fonction non lineaire, element essentiel des reseaux neuronaux. Le second module a etre introduit est l'encodeur optonumerique, utile au classement des objets. Le probleme de l'enregistrement de la memoire est aborde a l'aide du codage iteratif global.

An Applied-Scientific Approach to Field Assessments - Try It Out - A Field Guide for Practitioners (Une approche scientifique des evaluations de terrain - Essayer le - Un guide de terrain a destination des praticiens)

DTIC Science & Technology

2017-12-01

settings – be it field trials, field experiments, tests or evaluations . This guide is based on experience of the the NATO STO Task Group (HFM-211...practice by the Task Group. Feedback from defence colleges and Training and Evaluation staffs is highly welcomed. ES - 2 STO-TR-HFM-211 Une... evaluation programs have been setup to analyse and demonstrate the added value and effectiveness of new developments such as new operational concepts, new

Air Vehicle Mission Control and Management, The Guidance and Control Panel Symposium (53rd) Held in Amsterdam, The Netherlands on 22-25 October 1991 ((La Gestion et le Controle des Missions des Vehicules Aeriens)

DTIC Science & Technology

1992-03-01

will address this point later, for an even larger proportion of weapon systems. Again a variation in operation that require IV. FUTURE ENVIRONMENTS FOR...the proportion by which sight angle are calculated similarly to the Mach number differs from the instantaneous Paladin aircraft parameters (equations 1...CONCLUSIONS SHORTFALL The proposition that teamworK should be a high- level design driver poses a radical departure from FIGURE 5 - Audit Component Proportions

Fluid Dynamics Problems of Vehicles Operating Near or in the Air-Sea Interface (Problemes de Dynamique des Fluides des Vehicules Evoluant dans ou pres de L’interface Air-Mer).

DTIC Science & Technology

1999-02-01

articulated rotor systems, the rotor blade can deflect several feet and contact the fuselage of the helicopter, resulting in a "tunnel strike " in...tandem rotor configurations; or the tailboom, resulting in a "tailboom strike " in single rotor configurations. The H-46 Sea Knight, a tandem rotor...helicopter used by the U.S. Navy and Marines, has encountered over 100 tunnel strikes since 1964 and still occasionally experiences them. Most tunnel

Silent Ship Research Applications and Operation. Volume 2. Unclassified Papers. Proceedings of a Conference Held at SACLANTCEN on 2-4 October 1984

DTIC Science & Technology

1985-01-15

moyennes calculees sur 62 bateaux sont priesnteesdans le tableau suivznt aoy’?nno mowvuw. desma yonn des mayavw dom % aupentation genral: bate"u A bateaux 5...i coque en bois, acier ou polyester. Le decoupaqe des variables en classes pernet de bitir deux matrices *un - tableau disjonctif complet", *un...pr6sentents quelques expertises ac oustiques provenant de deux t~tudes lr~alis~es .par le G.E.R.B.A.M. .I *la premiý-re, sur 95 thoniers ligneurs

Biotechnologies for Assessment of Toxic Hazards in Operational Environments (Utilisation des biotechnologies pour l’evaluation des risques toxiques en environnement operationnel)

DTIC Science & Technology

2008-06-01

of Neurotoxicity of Depleted Uranium 9-5 9.3.4 Ruling Out Teratogenic and Reproductive Effects – DoD Birth Defects Registry 9-5 9.3.5 Searching for...or other military engines, and fires in or near the battlefield (e.g. as a consequence of enemy activity – see burning oil fields in Iraq during the...residual oil fly ash – and the analysis of VOC is a challenge. VOC are associated with adverse effects to human health; at low concentrations they can

Design of optimised backstepping controller for the synchronisation of chaotic Colpitts oscillator using shark smell algorithm

NASA Astrophysics Data System (ADS)

Fouladi, Ehsan; Mojallali, Hamed

2018-01-01

In this paper, an adaptive backstepping controller has been tuned to synchronise two chaotic Colpitts oscillators in a master-slave configuration. The parameters of the controller are determined using shark smell optimisation (SSO) algorithm. Numerical results are presented and compared with those of particle swarm optimisation (PSO) algorithm. Simulation results show better performance in terms of accuracy and convergence for the proposed optimised method compared to PSO optimised controller or any non-optimised backstepping controller.

Modeling Anti-Air Warfare With Discrete Event Simulation and Analyzing Naval Convoy Operations

DTIC Science & Technology

2016-06-01

WARFARE WITH DISCRETE EVENT SIMULATION AND ANALYZING NAVAL CONVOY OPERATIONS by Ali E. Opcin June 2016 Thesis Advisor: Arnold H. Buss Co...REPORT DATE June 2016 3. REPORT TYPE AND DATES COVERED Master’s thesis 4. TITLE AND SUBTITLE MODELING ANTI-AIR WARFARE WITH DISCRETE EVENT...In this study, a discrete event simulation (DES) was built by modeling ships, and their sensors and weapons, to simulate convoy operations under

Using Discrete-Event Simulation to Promote Quality Improvement and Efficiency in a Radiation Oncology Treatment Center.

PubMed

Famiglietti, Robin M; Norboge, Emily C; Boving, Valentine; Langabeer, James R; Buchholz, Thomas A; Mikhail, Osama

To meet demand for radiation oncology services and ensure patient-centered safe care, management in an academic radiation oncology department initiated quality improvement efforts using discrete-event simulation (DES). Although the long-term goal was testing and deploying solutions, the primary aim at the outset was characterizing and validating a computer simulation model of existing operations to identify targets for improvement. The adoption and validation of a DES model of processes and procedures affecting patient flow and satisfaction, employee experience, and efficiency were undertaken in 2012-2013. Multiple sources were tapped for data, including direct observation, equipment logs, timekeeping, and electronic health records. During their treatment visits, patients averaged 50.4 minutes in the treatment center, of which 38% was spent in the treatment room. Patients with appointments between 10 AM and 2 PM experienced the longest delays before entering the treatment room, and those in the clinic in the day's first and last hours, the shortest (<5 minutes). Despite staffed for 14.5 hours daily, the clinic registered only 20% of patients after 2:30 PM. Utilization of equipment averaged 58%, and utilization of staff, 56%. The DES modeling quantified operations, identifying evidence-based targets for next-phase remediation and providing data to justify initiatives.

Etude experimentale et optimisation d'un systeme hybride hydraulique pour camions a ordures et amelioration des performances par raffinement de sa logique de controle

NASA Astrophysics Data System (ADS)

Lacroix, Benoit

The aim of this thesis is to demonstrate experimentally the operation of a hydraulic hybrid system specifically dedicated to the application of refuse trucks in addition to proposing solutions to improve its control strategy. The developed hybrid system recovers the vehicle's kinetic energy during braking. A variable displacement hydraulic motor then uses the energy stored in a hydraulic accumulator to assist the internal combustion engine (ICE) at suitable times. The particular aspect of this system is that assistance to the ICE can occur when it operates at idle and drives the auxiliary hydraulic equipment of the refuse truck. Essentially, the control strategy initially developed maximizes the recovery of braking energy and uses that energy to minimize the solicitation of the ICE at idle. The experimental results obtained with two prototypes tested in real operating conditions show that the hybrid system can recover a significant portion of braking energy. In addition, the results show that it is possible to reduce the load on the ICE during idle with the application of an assisting torque. However, the advantage of assisting the ICE in specific areas of the operating range is slim since the ICE's gross efficiency varies only slightly depending on conditions of operation. This is confirmed by the optimization of the control logic using deterministic dynamic programming. Indeed, by managing the pressure in the accumulator to maximize the amount of energy recovered during braking and by dosing the assistance to the ICE in an ideal fashion, the optimal control only managed to improve fuel savings by 6% in comparison to the original control. Therefore, since the efforts that would be required to emulate the ideal behavior in real time are significant for a relatively small and uncertain gain, the initial control logic is considered near optimal. Finally, this thesis proposes an improved version of the torque assisting hybrid system that could shut down the ICE when the vehicle is stopped while maintaining functional the auxiliary hydraulic equipment. An optimization of the control logic indicates that proper management of the pressure in the accumulator would allow turning off the ICE most of the time at stop and thus, would increase the fuel savings by over 40% compared to the original system. The simulation of a basic control strategy shows that such pressure management may be feasible in real time and that the potential gain in fuel savings is achievable. Keywords: hybrid system, hydraulic, control, refuse truck.

Introduction to Flight Test Engineering (Introduction aux techniques des essais en vol)

DTIC Science & Technology

2005-07-01

or aircraft parameters • Calculations in the frequency domain ( Fast Fourier Transform) • Data analysis with dedicated software for: • Signal...density Fast Fourier Transform Transfer function analysis Frequency response analysis Etc. PRESENTATION Color/black & white Display screen...envelope by operating the airplane at increasing ranges - representing increasing risk - of engine operation, airspeeds both fast and slow, altitude

5 CFR Appendix A to Part 581 - List of Agents Designated To Accept Legal Process

Code of Federal Regulations, 2014 CFR

2014-01-01

... Bldg., 210 Walnut Street, Des Moines, IA 50309, (515) 284-4588 Human Resources Officer, Natural..., (303) 969-7739 Department of Justice Offices, Boards, and Divisions Personnel Group/Payroll Operations...

5 CFR Appendix A to Part 581 - List of Agents Designated To Accept Legal Process

Code of Federal Regulations, 2010 CFR

2010-01-01

... Bldg., 210 Walnut Street, Des Moines, IA 50309, (515) 284-4588 Human Resources Officer, Natural..., (303) 969-7739 Department of Justice Offices, Boards, and Divisions Personnel Group/Payroll Operations...

5 CFR Appendix A to Part 581 - List of Agents Designated To Accept Legal Process

Code of Federal Regulations, 2013 CFR

2013-01-01

... Bldg., 210 Walnut Street, Des Moines, IA 50309, (515) 284-4588 Human Resources Officer, Natural..., (303) 969-7739 Department of Justice Offices, Boards, and Divisions Personnel Group/Payroll Operations...

5 CFR Appendix A to Part 581 - List of Agents Designated To Accept Legal Process

Code of Federal Regulations, 2012 CFR

2012-01-01

... Bldg., 210 Walnut Street, Des Moines, IA 50309, (515) 284-4588 Human Resources Officer, Natural..., (303) 969-7739 Department of Justice Offices, Boards, and Divisions Personnel Group/Payroll Operations...

5 CFR Appendix A to Part 581 - List of Agents Designated To Accept Legal Process

Code of Federal Regulations, 2011 CFR

2011-01-01

... Bldg., 210 Walnut Street, Des Moines, IA 50309, (515) 284-4588 Human Resources Officer, Natural..., (303) 969-7739 Department of Justice Offices, Boards, and Divisions Personnel Group/Payroll Operations...

CMOS analogue amplifier circuits optimisation using hybrid backtracking search algorithm with differential evolution

NASA Astrophysics Data System (ADS)

Mallick, S.; Kar, R.; Mandal, D.; Ghoshal, S. P.

2016-07-01

This paper proposes a novel hybrid optimisation algorithm which combines the recently proposed evolutionary algorithm Backtracking Search Algorithm (BSA) with another widely accepted evolutionary algorithm, namely, Differential Evolution (DE). The proposed algorithm called BSA-DE is employed for the optimal designs of two commonly used analogue circuits, namely Complementary Metal Oxide Semiconductor (CMOS) differential amplifier circuit with current mirror load and CMOS two-stage operational amplifier (op-amp) circuit. BSA has a simple structure that is effective, fast and capable of solving multimodal problems. DE is a stochastic, population-based heuristic approach, having the capability to solve global optimisation problems. In this paper, the transistors' sizes are optimised using the proposed BSA-DE to minimise the areas occupied by the circuits and to improve the performances of the circuits. The simulation results justify the superiority of BSA-DE in global convergence properties and fine tuning ability, and prove it to be a promising candidate for the optimal design of the analogue CMOS amplifier circuits. The simulation results obtained for both the amplifier circuits prove the effectiveness of the proposed BSA-DE-based approach over DE, harmony search (HS), artificial bee colony (ABC) and PSO in terms of convergence speed, design specifications and design parameters of the optimal design of the analogue CMOS amplifier circuits. It is shown that BSA-DE-based design technique for each amplifier circuit yields the least MOS transistor area, and each designed circuit is shown to have the best performance parameters such as gain, power dissipation, etc., as compared with those of other recently reported literature.

Le stéréorestituteur Kelsh

USGS Publications Warehouse

Kelsh, H.T.

1949-01-01

Le ste??re??orestituteur Kelsh est un appareil de restitution a?? double projection base?? sur le principe des anaglyphes, comme le Multiplex par exemple, mais il a une plus grande pre??cision que ce dernier, vu que les ne??gatifs sont utilise??s directement pour la restitution, sans que l'on soit oblige?? de les re??duire au pre??alable. Une telle solution devient possible lorsque l'e??chelle de l'image plastique (mode??le) est au moins 7 fois plus grande que celle des cliche??s. L'appareil comprend un support reposant par 4 pieds sur la table a?? dessin. Sa partie supe??rieure porte, par l'interme??diaire de trois vis calantes, un cadre dans lequel les deux chambres de projection sont suspendues. Des leviers de commande, agissant sur les chambres, permettent d'introduire la base, le de??versement et les inclinaisons transversale et longitudinale. Les cliche??s conjugue??s ou des diapositifs sont directement place??s dans les chambres de projection munies d'objectifs. En projetant les deux cliche??s au moyen de couleurs comple??mentaires, l'observateur - muni de lunettes a?? verres colore??s (couleurs comple??mentaires) - observe l'image plastique audessus de la table a?? dessin, l'orientation relative des chambres ayant e??te?? e??tablie au pre??alable. Pour le report des points de l'image plastique sur la minute, l'ope??rateur dispose d'une tablette amovible a?? marque-repe??re lumineuse qu'il de??place a?? la main et dont la hauteur au-dessus de la table a?? dessin peut e??tre commande??e par une molette. Pour e??tablir l'orientation absolue de l'image plastique, il suffit d'incliner convenablement le cadre de suspension a?? l'aide des vis calantes, l'orientation relative n'e??tant pas de??truite par cette ope??ration. Les deux cliche??s sont e??claire??s par des projecteurs munis d'une suspension a?? la cardan et relie??s a?? la tablette de restitution par des tiges te??lescopiques. Moyennant ce dispositif, l'e??clairage est concentre?? sur deux petites re??gions conjugue??es des cliche??s et l'observateur ne voit ainsi qu'une petite partie de l'image spatiale, ce qui pre??sente l'avantage de ne pas l'e??blouir. D'autre part, les tiges te??lescopiques impriment, suivant l'inclinaison, un de??placement vertical plus ou moins prononce?? aux objectifs de projection, ce qui permet d'e??liminer les erreurs de distorsion. Pour les travaux de triangulation ae??rienne, l'auteur propose d'appliquer la me??thode des plaques a?? fontes radiales (templets). Pour le passage d'un mode??le a?? l'autre, l'orientation spatiale des chambres de restitution est de??termine??e au moyen d'une nivelle place??e sur les cliche??s. Un premier essai a e??te?? effectue?? sur 7 mode??les (e??chelle des cliche??s 1/34000) et apre??s compensation l'erreur probable altime??trique des douze points connus s'est e??leve??e a?? 1.50 m tandis que l'erreur maximum e??tait de 4 m. L'erreur altime??trique des restitutions effectue??es par le U.S. Forest Service en Californie avec des cliche??s ou 1/48000, ou?? les diffe??rences de niveau de??passaient parfois 600 m par cliche??, varie entre 1 m et 2.70 m. ?? 1949.

Assessing communication as one of the drivers of urban resilience to weather extremes.

NASA Astrophysics Data System (ADS)

Vicari, Rosa; Schertzer, Daniel

2016-04-01

The quality of science and technology communication has become more challenging due to the fact that access to information has hugely increased in terms of variety and quantity. This is a consequence of different factors, among others the development of public relations by research institutes and the pervasive role of digital media (Bucchi 2013; Trench 2008). A key question is how can we objectively assess science and technology communication? Relatively few studies have been dedicated to the definition of pertinent indicators and standards (Neresini and Bucchi 2011). This research aims to understand how communication strategies, addressed to the general public, can optimise the impact of research findings in hydrology for resilient cities and how this can be assessed. Indeed urban resilience to extreme weather events relies both on engineering solutions and increased awareness of urban communities as it was highlighted by the FP7 SMARTesT project and the experiences carried out in the framework of TOMACS (Tokyo Metropolitan Area Convective Studies for Resilient Cities) and CASA (Engineering Research Center for Collaborative Adaptative Sensing of the Atmosphere, supported by the U.S. National Science Foundation). Communication assessment should be included in an alternative approach to evaluate urban resilience to weather extremes. Various qualitative and quantitative methods to monitor communication exist. According to this study, resilience indicators shouldn't only consider communication infrastructures but should also assess communication processes and their interactions with other resilience drivers; furthermore quantitative variables are considered as particularly relevant. Last, but not least, interesting inputs are provided by those case studies that exploit resilience assessment campaigns as an opportunity to practice participatory communication. This research is being led in the framework of the Chair Hydrology for Resilient Cities, co-founded by Veolia, Fondation des Ponts, and École des Ponts ParisTech.

Energy performance of stripper configurations for CO{sub 2} capture by aqueous amines

DOE Office of Scientific and Technical Information (OSTI.GOV)

Oyenekan, B.A.; Rochelle, G.T.

2006-04-12

Aqueous absorption/stripping is the state-of-the-art technology for the capture of CO{sub 2} from coal-fired power plants. This technology is energy-intensive and has been applied to CO{sub 2} removal from natural gas, ammonia, and hydrogen gas streams. Energy requirements can be reduced by the use of a more-reactive solvent, operating the cross exchanger at a lower temperature, optimizing the stripper operation, and using innovative stripper configurations (vacuum and multipressure). This work calculates stripper performance with an algorithm in Aspen Custom Modeler (ACM) that incorporates thermodynamic studies, reaction rate measurements, physical properties, and contactor-specific information for three stripper configuration-a simple stripper operatingmore » at 160 kPa, a multipressure stripper operating at three pressures (330/230/160 kPa), and a vacuum stripper (30 kPa) for two solvents: 7m (30 wt %) monoethanolamine (MEA) and 5m K{sup +}/2.5m piperazine. The temperature approach is varied from 5 to 10{sup o}C. With some approximations, we predict the influence of using solvents with varying heats of desorption {Delta}H{sub des}) on the reboiler duty and the equivalent work for stripping (reboiler duty as equivalent Carnot work plus compression work). With a rich solution giving PCO{sub 2}{asterisk} = 2.5 kPa at 40{sup o}C, the vacuum stripper is favored for solvents with Delta H{sub des} {<=} 21 kcal/(gmol of CO{sub 2}) while the multipressure configuration is attractive for solvents with {Delta}(H{sub des} {>=} 21 kcal/(gmol of CO{sub 2}).« less

Mission Planning for Tactical Aircraft (Preflight and In-Flight) (Systemes de Planification des Missions Pour Avions Tactiques) (Avant Vol et en Vol).

DTIC Science & Technology

1992-12-01

Ground-Based Mission Planning Systems 9 2.3 Networking Mission Planning Systems 11 2.4 Fully Automated Mission Planning I I 2.5 Unmanned Air Vehicles 13...Missile Engagement Zone RPV Remotely Piloted Vehicle MIDS Multifunction Information Distribution System RRDB Rapidly Reconfigurable Databus MIL-STD...Comrmantd OPORD Operations Order TV Television OPS Operational OR Operational Relationship UAV Unmanned Air Vehicle UAV Unnmanned Air Vehicle PA

Methodologie experimentale pour evaluer les caracteristiques des plateformes graphiques avioniques

NASA Astrophysics Data System (ADS)

Legault, Vincent

Within a context where the aviation industry intensifies the development of new visually appealing features and where time-to-market must be as short as possible, rapid graphics processing benchmarking in a certified avionics environment becomes an important issue. With this work we intend to demonstrate that it is possible to deploy a high-performance graphics application on an avionics platform that uses certified graphical COTS components. Moreover, we would like to bring to the avionics community a methodology which will allow developers to identify the needed elements for graphics system optimisation and provide them tools that can measure the complexity of this type of application and measure the amount of resources to properly scale a graphics system according to their needs. As far as we know, no graphics performance profiling tool dedicated to critical embedded architectures has been proposed. We thus had the idea of implementing a specialized benchmarking tool that would be an appropriate and effective solution to this problem. Our solution resides in the extraction of the key graphics specifications from an inherited application to use them afterwards in a 3D image generation application.

Optimisation des structures métalliques fléchies dans un calcul plastique

NASA Astrophysics Data System (ADS)

Geara, F.; Raphael, W.; Kaddah, F.

2005-05-01

The steel structure is a type of construction that is very developed in civil engineering. In the phase of survey and then of execution and installation of a metal work, the phase of conception is often the place of discontinuities that prevents the global optimization of material steel. In our survey, we used the traditional approach of optimization that is essentially based on the minimization of the weight of the structure, while taking advantages of plastic properties of steel in the case of a bending structure. It has been permitted because of to the relation found between the areas of the sections of the steel elements and the plastic moment of these sections. These relations have been drawn for different types of steel. In order to take advantages of the linear programming, a simplification has been introduced in transforming these relation to linear relations, which permits us to use simple methods as the simplex theorem. This procedure proves to be very interesting in the first phases of the survey and give very interesting results.

DES13S2cmm: The first superluminous supernova from the Dark Energy Survey

DOE PAGES

Papadopoulos, A.; Plazas, A. A.; D"Andrea, C. B.; ...

2015-03-23

We present DES13S2cmm, the first spectroscopically-confirmed superluminous supernova (SLSN) from the Dark Energy Survey (DES). We briefly discuss the data and search algorithm used to find this event in the first year of DES operations, and outline the spectroscopic data obtained from the European Southern Observatory (ESO) Very Large Telescope to confirm its redshift (z = 0.663 ± 0.001 based on the host-galaxy emission lines) and likely spectral type (type I). Using this redshift, we find M peak U = –21.05 +0.10 –0.09 for the peak, rest-frame U-band absolute magnitude, and find DES13S2cmm to be located in a faint, low-metallicitymore » (sub-solar), low stellar-mass host galaxy (log(M/M⊙) = 9.3 ± 0.3), consistent with what is seen for other SLSNe-I. We compare the bolometric light curve of DES13S2cmm to fourteen similarly well-observed SLSNe-I in the literature and find it possesses one of the slowest declining tails (beyond +30 days rest frame past peak), and is the faintest at peak. Moreover, we find the bolometric light curves of all SLSNe-I studied herein possess a dispersion of only 0.2–0.3 magnitudes between +25 and +30 days after peak (rest frame) depending on redshift range studied; this could be important for ‘standardising’ such supernovae, as is done with the more common type Ia. We fit the bolometric light curve of DES13S2cmm with two competing models for SLSNe-I – the radioactive decay of ⁵⁶Ni, and a magnetar – and find that while the magnetar is formally a better fit, neither model provides a compelling match to the data. Although we are unable to conclusively differentiate between these two physical models for this particular SLSN-I, further DES observations of more SLSNe-I should break this degeneracy, especially if the light curves of SLSNe-I can be observed beyond 100 days in the rest frame of the supernova.« less

DES Science Portal: Computing Photometric Redshifts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gschwend, Julia

An important challenge facing photometric surveys for cosmological purposes, such as the Dark Energy Survey (DES), is the need to produce reliable photometric redshifts (photo-z). The choice of adequate algorithms and configurations and the maintenance of an up-to-date spectroscopic database to build training sets, for example, are challenging tasks when dealing with large amounts of data that are regularly updated and constantly growing. In this paper, we present the first of a series of tools developed by DES, provided as part of the DES Science Portal, an integrated web-based data portal developed to facilitate the scientific analysis of the data,more » while ensuring the reproducibility of the analysis. We present the DES Science Portal photometric redshift tools, starting from the creation of a spectroscopic sample to training the neural network photo-z codes, to the final estimation of photo-zs for a large photometric catalog. We illustrate this operation by calculating well calibrated photo-zs for a galaxy sample extracted from the DES first year (Y1A1) data. The series of processes mentioned above is run entirely within the Portal environment, which automatically produces validation metrics, and maintains the provenance between the different steps. This system allows us to fine tune the many steps involved in the process of calculating photo-zs, making sure that we do not lose the information on the configurations and inputs of the previous processes. By matching the DES Y1A1 photometry to a spectroscopic sample, we define different training sets that we use to feed the photo-z algorithms already installed at the Portal. Finally, we validate the results under several conditions, including the case of a sample limited to i<22.5 with the color properties close to the full DES Y1A1 photometric data. This way we compare the performance of multiple methods and training configurations. The infrastructure presented here is an effcient way to test several methods of calculating photo-zs and use them to create different catalogs for portal science workflows« less

Screening for depression in adolescent paediatric patients: validity of the new Depression Screener for Teenagers (DesTeen).

PubMed

Pietsch, Kathrin; Allgaier, Antje-Kathrin; Frühe, Barbara; Rohde, Sabine; Hosie, Stuart; Heinrich, Martina; Schulte-Körne, Gerd

2011-09-01

Depression in adolescents is often hard to detect. In many cases paediatricians are the first point of contact. In order to increase recognition rates, screening instruments may be a helpful support for health care professionals. However, there is a lack of valid and economical screening instruments for primary care patients. Thus, the aim of the study was the development of the new Depression Screener for Teenagers (DesTeen) and its validation in a paediatric sample. 326 patients between 13 and 16 years old completed the DesTeen and a diagnostic interview, serving as gold standard. Prevalence rate for any depressive disorder (minor depression, major depression and dysthymia) was 12.6%. Psychometric properties were calculated. For validity measures, the area under the receiver operating characteristic curves (AUC) for any depressive disorder and the diagnostic subgroups was computed. DesTeen showed a high reliability (Cronbach's α=.87) and a high validity (AUC=.91). For the diagnostic subgroups AUC values did not significantly differ from overall accuracy of any depressive disorder (major depression: AUC=.95, p=.179; dysthymia: AUC=.88, p=.605; minor depression: AUC=.87, p=.327). The optimal cut-off point for any depressive disorder according to the Youden-Index yielded a sensitivity of .90 and a specificity of .80. An abbreviated 5-item version of DesTeen showed no loss in validity (AUC=.90, p=.695). Overall, DesTeen can be regarded as a valid screening instrument for adolescent paediatric patients. For practical use, the 5-item version is even more promising. A replication of these results is essential. Copyright © 2011 Elsevier B.V. All rights reserved.

Methods of increasing the performance of radionuclide generators used in nuclear medicine: daughter nuclide build-up optimisation, elution-purification-concentration integration, and effective control of radionuclidic purity.

PubMed

Le, Van So; Do, Zoe Phuc-Hien; Le, Minh Khoi; Le, Vicki; Le, Natalie Nha-Truc

2014-06-10

Methods of increasing the performance of radionuclide generators used in nuclear medicine radiotherapy and SPECT/PET imaging were developed and detailed for 99Mo/99mTc and 68Ge/68Ga radionuclide generators as the cases. Optimisation methods of the daughter nuclide build-up versus stand-by time and/or specific activity using mean progress functions were developed for increasing the performance of radionuclide generators. As a result of this optimisation, the separation of the daughter nuclide from its parent one should be performed at a defined optimal time to avoid the deterioration in specific activity of the daughter nuclide and wasting stand-by time of the generator, while the daughter nuclide yield is maintained to a reasonably high extent. A new characteristic parameter of the formation-decay kinetics of parent/daughter nuclide system was found and effectively used in the practice of the generator production and utilisation. A method of "early elution schedule" was also developed for increasing the daughter nuclide production yield and specific radioactivity, thus saving the cost of the generator and improving the quality of the daughter radionuclide solution. These newly developed optimisation methods in combination with an integrated elution-purification-concentration system of radionuclide generators recently developed is the most suitable way to operate the generator effectively on the basis of economic use and improvement of purposely suitable quality and specific activity of the produced daughter radionuclides. All these features benefit the economic use of the generator, the improved quality of labelling/scan, and the lowered cost of nuclear medicine procedure. Besides, a new method of quality control protocol set-up for post-delivery test of radionuclidic purity has been developed based on the relationship between gamma ray spectrometric detection limit, required limit of impure radionuclide activity and its measurement certainty with respect to optimising decay/measurement time and product sample activity used for QC quality control. The optimisation ensures a certainty of measurement of the specific impure radionuclide and avoids wasting the useful amount of valuable purified/concentrated daughter nuclide product. This process is important for the spectrometric measurement of very low activity of impure radionuclide contamination in the radioisotope products of much higher activity used in medical imaging and targeted radiotherapy.

Intermediate quality control tests in the development of a superconducting RF cryomodule for CW operation

NASA Astrophysics Data System (ADS)

Pattalwar, Shrikant; Jones, Thomas; Strachan, John; Bate, Robert; Davies, Phil; McIntosh, Peter

2012-06-01

Through an international cryomodule collaboration, ASTeC at Daresbury Laboratory has taken the primary responsibility in leading the development of an optimised Superconducting RF (SRF) cryomodule, operating in CW mode for energy recovery facilities and other high duty cycle accelerators. For high beam current operation, Higher Order Mode (HOM) absorbers are critical components of the SRF Cryomodule, ensuring excessive heating of the accelerating structures and beam instabilities are effectively managed. This paper describes some of the cold tests conducted on the HOM absorbers and other critical components during the construction phase, to ensure that the quality and reliable cryomodule performance is maintained.

Warpage optimisation on the moulded part with straight-drilled and conformal cooling channels using response surface methodology (RSM) and glowworm swarm optimisation (GSO)

NASA Astrophysics Data System (ADS)

Hazwan, M. H. M.; Shayfull, Z.; Sharif, S.; Nasir, S. M.; Zainal, N.

2017-09-01

In injection moulding process, quality and productivity are notably important and must be controlled for each product type produced. Quality is measured as the extent of warpage of moulded parts while productivity is measured as a duration of moulding cycle time. To control the quality, many researchers have introduced various of optimisation approaches which have been proven enhanced the quality of the moulded part produced. In order to improve the productivity of injection moulding process, some of researches have proposed the application of conformal cooling channels which have been proven reduced the duration of moulding cycle time. Therefore, this paper presents an application of alternative optimisation approach which is Response Surface Methodology (RSM) with Glowworm Swarm Optimisation (GSO) on the moulded part with straight-drilled and conformal cooling channels mould. This study examined the warpage condition of the moulded parts before and after optimisation work applied for both cooling channels. A front panel housing have been selected as a specimen and the performance of proposed optimisation approach have been analysed on the conventional straight-drilled cooling channels compared to the Milled Groove Square Shape (MGSS) conformal cooling channels by simulation analysis using Autodesk Moldflow Insight (AMI) 2013. Based on the results, melt temperature is the most significant factor contribute to the warpage condition and warpage have optimised by 39.1% after optimisation for straight-drilled cooling channels and cooling time is the most significant factor contribute to the warpage condition and warpage have optimised by 38.7% after optimisation for MGSS conformal cooling channels. In addition, the finding shows that the application of optimisation work on the conformal cooling channels offers the better quality and productivity of the moulded part produced.

Active Control of Engine Dynamics (Le controle actif pour la dynamique des moteurs)

DTIC Science & Technology

2002-11-01

optimum operating conditions, avoiding, for example, inadvertent operation when the pulsations can cause unacceptable rates of surface heat transfer or...such as shipboard incineration, and power and heat generation in the field. Because the practical problem of suppressing combustion instabilities has...aforementioned physical processes are essentially completed prior to entering the combustor. One consequence of fuel-air premixing is that the heat

On the implementation of an auxiliary pantograph for speed increase on existing lines

NASA Astrophysics Data System (ADS)

Liu, Zhendong; Jönsson, Per-Anders; Stichel, Sebastian; Rønnquist, Anders

2016-08-01

The contact between pantograph and catenary at high speeds suffers from high dynamic contact force variation due to stiffness variations and wave propagation. To increase operational speed on an existing catenary system, especially for soft catenary systems, technical upgrading is usually necessary. Therefore, it is desirable to explore a more practical and cost-saving method to increase the operational speed. Based on a 3D pantograph-catenary finite element model, a parametric study on two-pantograph operation with short spacing distances at high speeds shows that, although the performance of the leading pantograph gets deteriorated, the trailing pantograph feels an improvement if pantographs are spaced at a proper distance. Then, two main positive effects, which can cause the improvement, are addressed. Based on a discussion on wear mechanisms, this paper suggests to use the leading pantograph as an auxiliary pantograph, which does not conduct any electric current, to minimise additional wear caused by the leading pantograph. To help implementation and achieve further improvement under this working condition, this paper investigates cases with optimised uplift force on the leading pantograph and with system parameter deviations. The results show that the two positive effects still remain even with some system parameter deviations. About 30% of speed increase should be possibly achieved still sustaining a good dynamic performance with help of the optimised uplift force.

Alternative Submarine Watch Systems: Recommendation for a New CF Submarine Watch Schedule (Systemes Differents d’Horaire de Garde a Bord des Sous-Marins: Nouvel Horaire Recommande Pour les Sous-Marins des FC)

DTIC Science & Technology

2010-01-01

comparativement à une efficacité cognitive de 96 % pour l’horaire de 1 tour sur trois de quatre heures ainsi que pour l’horaire de 1 tour sur trois de...tour sur 2 (8-4-4-8) comparativement à une efficacité cognitive de 96 % pour l’horaire de 1 tour sur trois de quatre heures ainsi que pour l’horaire...FAST™ (Fatigue Avoidance and Safety Tool), a computer application designed to predict and prevent fatigue in operational settings. The output of FAST

Guidance-Control-Navigation Automation for Night All-Weather Tactical Operations Held at Hague (Netherlands) on 21-24 May 1985.

DTIC Science & Technology

1985-11-01

1 1 f, 1,1"u’t I r -I irmat tor related to the weapon system as a whole can [1--1 Th t- it: as growth pot enS lal to Interface a Mission Planning...taictical decisions4 1n" 1 w 1I ’ depenid en the? core avionics to varying dog re-n. It is Important .i.h, h11~ knew whether any equipment or system ...toot en limitant le poids. le volume et le coOt des eguipements. Des fonctions nouvelles sont introduites. Peu A peu, le systeme de navigation se

Human Factors Analysis of Aircrew Operational Tasks in a Fixed-Wing Search and Rescue Aircraft Cargo Compartment (Analyse des facteurs humains lies aux taches operationnelles qui sont executees par les membres d’equipage dans la soute des avions de recherche et de sauvetage)

DTIC Science & Technology

2011-05-01

involving bending at the waist with straight legs (stooped), bending of the knees with the buttocks resting on the heels (squatted), non-neutral...oscillations. Additional headroom clearance is required for the tallest SAR Techs to reduce the risk of neck injury caused by the head striking the...address concerns regarding future risk of musculoskeletal injury to SAR Techs working in the cargo compartment of a FWSAR aircraft. The full range

The Operation and Impact of Participants' Trans-Expedition Reflective Practice: Structuring and Optimising the Transfer Process

ERIC Educational Resources Information Center

Hickman, Mark; Collins, Dave

2014-01-01

With gap year activities, including expeditions, for young people worth an estimated £2 billion annually, the subject of transfer (or ensuring that outcomes offer positive benefits to participants' general lives) from these experiences is an important topic in outdoor education. This paper argues that many of the claims for a positive behavioural…

First in situ evidence of wakes in the far field behind offshore wind farms.

PubMed

Platis, Andreas; Siedersleben, Simon K; Bange, Jens; Lampert, Astrid; Bärfuss, Konrad; Hankers, Rudolf; Cañadillas, Beatriz; Foreman, Richard; Schulz-Stellenfleth, Johannes; Djath, Bughsin; Neumann, Thomas; Emeis, Stefan

2018-02-01

More than 12 GW of offshore wind turbines are currently in operation in European waters. To optimise the use of the marine areas, wind farms are typically clustered in units of several hundred turbines. Understanding wakes of wind farms, which is the region of momentum and energy deficit downwind, is important for optimising the wind farm layouts and operation to minimize costs. While in most weather situations (unstable atmospheric stratification), the wakes of wind turbines are only a local effect within the wind farm, satellite imagery reveals wind-farm wakes to be several tens of kilometres in length under certain conditions (stable atmospheric stratification), which is also predicted by numerical models. The first direct in situ measurements of the existence and shape of large wind farm wakes by a specially equipped research aircraft in 2016 and 2017 confirm wake lengths of more than tens of kilometres under stable atmospheric conditions, with maximum wind speed deficits of 40%, and enhanced turbulence. These measurements were the first step in a large research project to describe and understand the physics of large offshore wakes using direct measurements, together with the assessment of satellite imagery and models.

Electromagnetic optimisation of a 2.45 GHz microwave plasma source operated at atmospheric pressure and designed for hydrogen production

NASA Astrophysics Data System (ADS)

Miotk, R.; Jasiński, M.; Mizeraczyk, J.

2018-03-01

This paper presents the partial electromagnetic optimisation of a 2.45 GHz cylindrical-type microwave plasma source (MPS) operated at atmospheric pressure. The presented device is designed for hydrogen production from liquid fuels, e.g. hydrocarbons and alcohols. Due to industrial requirements regarding low costs for hydrogen produced in this way, previous testing indicated that improvements were required to the electromagnetic performance of the MPS. The MPS has a duct discontinuity region, which is a result of the cylindrical structure located within the device. The microwave plasma is generated in this discontinuity region. Rigorous analysis of the region requires solving a set of Maxwell equations, which is burdensome for complicated structures. Furthermore, the presence of the microwave plasma increases the complexity of this task. To avoid calculating the complex Maxwell equations, we suggest the use of the equivalent circuit method. This work is based upon the idea of using a Weissfloch circuit to characterize the area of the duct discontinuity and the plasma. The resulting MPS equivalent circuit allowed the calculation of a capacitive metallic diaphragm, through which an improvement in the electromagnetic performance of the plasma source was obtained.

Efficiency of endoscopy units can be improved with use of discrete event simulation modeling.

PubMed

Sauer, Bryan G; Singh, Kanwar P; Wagner, Barry L; Vanden Hoek, Matthew S; Twilley, Katherine; Cohn, Steven M; Shami, Vanessa M; Wang, Andrew Y

2016-11-01

Background and study aims: The projected increased demand for health services obligates healthcare organizations to operate efficiently. Discrete event simulation (DES) is a modeling method that allows for optimization of systems through virtual testing of different configurations before implementation. The objective of this study was to identify strategies to improve the daily efficiencies of an endoscopy center with the use of DES. Methods: We built a DES model of a five procedure room endoscopy unit at a tertiary-care university medical center. After validating the baseline model, we tested alternate configurations to run the endoscopy suite and evaluated outcomes associated with each change. The main outcome measures included adequate number of preparation and recovery rooms, blocked inflow, delay times, blocked outflows, and patient cycle time. Results: Based on a sensitivity analysis, the adequate number of preparation rooms is eight and recovery rooms is nine for a five procedure room unit (total 3.4 preparation and recovery rooms per procedure room). Simple changes to procedure scheduling and patient arrival times led to a modest improvement in efficiency. Increasing the preparation/recovery rooms based on the sensitivity analysis led to significant improvements in efficiency. Conclusions: By applying tools such as DES, we can model changes in an environment with complex interactions and find ways to improve the medical care we provide. DES is applicable to any endoscopy unit and would be particularly valuable to those who are trying to improve on the efficiency of care and patient experience.

Efficiency of endoscopy units can be improved with use of discrete event simulation modeling

PubMed Central

Sauer, Bryan G.; Singh, Kanwar P.; Wagner, Barry L.; Vanden Hoek, Matthew S.; Twilley, Katherine; Cohn, Steven M.; Shami, Vanessa M.; Wang, Andrew Y.

2016-01-01

Background and study aims: The projected increased demand for health services obligates healthcare organizations to operate efficiently. Discrete event simulation (DES) is a modeling method that allows for optimization of systems through virtual testing of different configurations before implementation. The objective of this study was to identify strategies to improve the daily efficiencies of an endoscopy center with the use of DES. Methods: We built a DES model of a five procedure room endoscopy unit at a tertiary-care university medical center. After validating the baseline model, we tested alternate configurations to run the endoscopy suite and evaluated outcomes associated with each change. The main outcome measures included adequate number of preparation and recovery rooms, blocked inflow, delay times, blocked outflows, and patient cycle time. Results: Based on a sensitivity analysis, the adequate number of preparation rooms is eight and recovery rooms is nine for a five procedure room unit (total 3.4 preparation and recovery rooms per procedure room). Simple changes to procedure scheduling and patient arrival times led to a modest improvement in efficiency. Increasing the preparation/recovery rooms based on the sensitivity analysis led to significant improvements in efficiency. Conclusions: By applying tools such as DES, we can model changes in an environment with complex interactions and find ways to improve the medical care we provide. DES is applicable to any endoscopy unit and would be particularly valuable to those who are trying to improve on the efficiency of care and patient experience. PMID:27853739

Using Optimisation Techniques to Granulise Rough Set Partitions

NASA Astrophysics Data System (ADS)

Crossingham, Bodie; Marwala, Tshilidzi

2007-11-01

This paper presents an approach to optimise rough set partition sizes using various optimisation techniques. Three optimisation techniques are implemented to perform the granularisation process, namely, genetic algorithm (GA), hill climbing (HC) and simulated annealing (SA). These optimisation methods maximise the classification accuracy of the rough sets. The proposed rough set partition method is tested on a set of demographic properties of individuals obtained from the South African antenatal survey. The three techniques are compared in terms of their computational time, accuracy and number of rules produced when applied to the Human Immunodeficiency Virus (HIV) data set. The optimised methods results are compared to a well known non-optimised discretisation method, equal-width-bin partitioning (EWB). The accuracies achieved after optimising the partitions using GA, HC and SA are 66.89%, 65.84% and 65.48% respectively, compared to the accuracy of EWB of 59.86%. In addition to rough sets providing the plausabilities of the estimated HIV status, they also provide the linguistic rules describing how the demographic parameters drive the risk of HIV.

Hot electron light emission in gallium arsenide/aluminium(x) gallium(1-x) arsenic heterostructures

NASA Astrophysics Data System (ADS)

Teke, Ali

In this thesis we have demonstrated the operation of a novel tunable wavelength surface light emitting device. The device is based on a p-GaAs, and n-Ga1- xAlxAs heterojunction containing an inversion layer on the p- side, and GaAs quantum wells on the n- side, and, is referred to as HELLISH-2 (Hot Electron Light Emitting and Lasing in Semiconductor Heterostructure-Type 2). The devices utilise hot electron longitudinal transport and, therefore, light emission is independent of the polarity of the applied voltage. The wavelength of the emitted light can be tuned with the applied bias from GaAs band-to-band transition in the inversion layer to e1-hh1 transition in the quantum wells. In this work tunable means that the device can be operated at either single or multiple wavelength emission. The operation of the device requires only two diffused in point contacts. In this project four HELLISH-2 samples coded as ES1, ES2, ES6 and QT919 have been studied. First three samples were grown by MBE and the last one was grown by MOVPE techniques. ES1 was designed for single and double wavelength operation. ES2 was a control sample used to compare our results with previous work on HELLISH-2 and ES6 was designed for single, double and triple wavelength operation. Theoretical modelling of the device operation was carried out and compared with the experimental results. HELLISH-2 structure was optimised for low threshold and high efficiency operation as based on our model calculations. The last sample QT919 has been designed as an optimised device for single and double wavelength operation like ES1. HELLISH-2 has a number of advantages over the conventional light emitters, resulting in some possible applications, such as light logic gates and wavelength division multiplexing in optoelectronic.

A new paradigm in personal dosimetry using LiF:Mg,Cu,P.

PubMed

Cassata, J R; Moscovitch, M; Rotunda, J E; Velbeck, K J

2002-01-01

The United States Navy has been monitoring personnel for occupational exposure to ionising radiation since 1947. Film was exclusively used until 1973 when thermoluminescence dosemeters were introduced and used to the present time. In 1994, a joint research project between the Naval Dosimetry Center, Georgetown University, and Saint Gobain Crystals and Detectors (formerly Bicron RMP formerly Harshaw TLD) began to develop a state of the art thermoluminescent dosimetry system. The study was conducted from a large-scale dosimetry processor point of view with emphasis on a systems approach. Significant improvements were achieved by replacing the LiF:Mg,Ti with LiF:Mg,Cu,P TL elements due to the significant sensitivity increase, linearity, and negligible hiding. Dosemeter filters were optimised for gamma and X ray energy discrimination using Monte Carlo modelling (MCNP) resulting in significant improvement in accuracy and precision. Further improvements were achieved through the use of neural-network based dose calculation algorithms. Both back propagation and functional link methods were implemented and the data compared with essentially the same results. Several operational aspects of the system are discussed, including (1) background subtraction using control dosemeters, (2) selection criteria for control dosemeters, (3) optimisation of the TLD readers, (4) calibration methodology, and (5) the optimisation of the heating profile.

Designing selection tests for the future National Airspace System architecture

DOT National Transportation Integrated Search

1997-08-01

Empirical data describing the mix of human abilities required to operate and maintain the future National Airspace System (NAS) architecture are presently lacking. A research program is proposed to develop the scientific tools and collect data to des...

Analysis of optimisation method for a two-stroke piston ring using the Finite Element Method and the Simulated Annealing Method

NASA Astrophysics Data System (ADS)

Kaliszewski, M.; Mazuro, P.

2016-09-01

Simulated Annealing Method of optimisation for the sealing piston ring geometry is tested. The aim of optimisation is to develop ring geometry which would exert demanded pressure on a cylinder just while being bended to fit the cylinder. Method of FEM analysis of an arbitrary piston ring geometry is applied in an ANSYS software. The demanded pressure function (basing on formulae presented by A. Iskra) as well as objective function are introduced. Geometry definition constructed by polynomials in radial coordinate system is delivered and discussed. Possible application of Simulated Annealing Method in a piston ring optimisation task is proposed and visualised. Difficulties leading to possible lack of convergence of optimisation are presented. An example of an unsuccessful optimisation performed in APDL is discussed. Possible line of further optimisation improvement is proposed.

Nurse strategies for optimising patient participation in nursing care.

PubMed

Sahlsten, Monika J M; Larsson, Inga E; Sjöström, Björn; Plos, Kaety A E

2009-09-01

THE STUDY'S RATIONALE: Patient participation is an essential factor in nursing care and medical treatment and a legal right in many countries. Despite this, patients have experienced insufficient participation, inattention and neglect regarding their problems and may respond with dependence, passivity or taciturnity. Accordingly, nurses strategies for optimising patient participation in nursing care is an important question for the nursing profession. The aim was to explore Registered Nurses' strategies to stimulate and optimise patient participation in nursing care. The objective was to identify ward nurses' supporting practices. A qualitative research approach was applied. Three focus groups with experienced Registered Nurses providing inpatient somatic care (n = 16) were carried out. These nurses were recruited from three hospitals in West Sweden. The data were analysed using content analysis technique. The ethics of scientific work was adhered to. According to national Swedish legislation, no formal permit from an ethics committee was required. The participants gave informed consent after verbal and written information. Nurse strategies for optimising patient participation in nursing care were identified as three categories: 'Building close co-operation', 'Getting to know the person' and 'Reinforcing self-care capacity' and their 10 subcategories. The strategies point to a process of emancipation of the patient's potential by finding his/her own inherent knowledge, values, motivation and goals and linking these to actions. Nurses need to strive for guiding the patient towards attaining meaningful experiences, discoveries, learning and development. The strategies are important and useful to balance the asymmetry in the nurse-patient relationship in daily nursing practice and also in quality assurance to evaluate and improve patient participation and in education. However, further verification of the findings is recommended by means of replication or other studies in different clinical settings. © 2009 The Authors. Journal compilation © 2009 Nordic College of Caring Science.

Optimisation of assembly scheduling in VCIM systems using genetic algorithm

NASA Astrophysics Data System (ADS)

Dao, Son Duy; Abhary, Kazem; Marian, Romeo

2017-09-01

Assembly plays an important role in any production system as it constitutes a significant portion of the lead time and cost of a product. Virtual computer-integrated manufacturing (VCIM) system is a modern production system being conceptually developed to extend the application of traditional computer-integrated manufacturing (CIM) system to global level. Assembly scheduling in VCIM systems is quite different from one in traditional production systems because of the difference in the working principles of the two systems. In this article, the assembly scheduling problem in VCIM systems is modeled and then an integrated approach based on genetic algorithm (GA) is proposed to search for a global optimised solution to the problem. Because of dynamic nature of the scheduling problem, a novel GA with unique chromosome representation and modified genetic operations is developed herein. Robustness of the proposed approach is verified by a numerical example.

Scale-up and economic analysis of biodiesel production from municipal primary sewage sludge.

PubMed

Olkiewicz, Magdalena; Torres, Carmen M; Jiménez, Laureano; Font, Josep; Bengoa, Christophe

2016-08-01

Municipal wastewater sludge is a promising lipid feedstock for biodiesel production, but the need to eliminate the high water content before lipid extraction is the main limitation for scaling up. This study evaluates the economic feasibility of biodiesel production directly from liquid primary sludge based on experimental data at laboratory scale. Computational tools were used for the modelling of the process scale-up and the different configurations of lipid extraction to optimise this step, as it is the most expensive. The operational variables with a major influence in the cost were the extraction time and the amount of solvent. The optimised extraction process had a break-even price of biodiesel of 1232 $/t, being economically competitive with the current cost of fossil diesel. The proposed biodiesel production process from waste sludge eliminates the expensive step of sludge drying, lowering the biodiesel price. Copyright © 2016 Elsevier Ltd. All rights reserved.

Optimising use of the mini C-arm in foot and ankle surgery.

PubMed

Gangopadhyay, Soham; Scammell, Brigitte E

2009-01-01

The mini C-arm reduces exposure to ionising radiation compared to the conventional C-arm. Optimising radiation exposure is not only desirable, but also a legal requirement and protocols should be in place to achieve this. Since 2004, all elective foot surgery requiring intraoperative imaging was performed using the mini C-arm. Screening times and radiation doses were recorded for each procedure. Following a learning curve, the screening times stabilised around the median value for the individual procedures. For subtalar or triple arthrodesis this was less than 60 s, for ankle arthrodesis, less than 90 s, for hindfoot arthrodesis using a nail, less than 100 s and for joint injections less than 12 s. Screening time can be used as an audit tool to measure optimum use of the mini C-arm. A protocol is presented including an audit form for every operation where the mini C-arm is used. Radiation protection issues are addressed.

Fluid Mechanics Optimising Organic Synthesis

NASA Astrophysics Data System (ADS)

Leivadarou, Evgenia; Dalziel, Stuart

2015-11-01

The Vortex Fluidic Device (VFD) is a new ``green'' approach in the synthesis of organic chemicals with many industrial applications in biodiesel generation, cosmetics, protein folding and pharmaceutical production. The VFD is a rapidly rotating tube that can operate with a jet feeding drops of liquid reactants to the base of the tube. The aim of this project is to explain the fluid mechanics of the VFD that influence the rate of reactions. The reaction rate is intimately related to the intense shearing that promotes collision between reactant molecules. In the VFD, the highest shears are found at the bottom of the tube in the Rayleigh and the Ekman layer and at the walls in the Stewardson layers. As a step towards optimising the performance of the VFD we present experiments conducted in order to establish the minimum drop volume and maximum rotation rate for maximum axisymmetric spreading without fingering instability. PhD candidate, Department of Applied Mathematics and Theoretical Physics.

Thermal Performance Analysis of Solar Collectors Installed for Combisystem in the Apartment Building

NASA Astrophysics Data System (ADS)

Žandeckis, A.; Timma, L.; Blumberga, D.; Rochas, C.; Rošā, M.

2012-01-01

The paper focuses on the application of wood pellet and solar combisystem for space heating and hot water preparation at apartment buildings under the climate of Northern Europe. A pilot project has been implemented in the city of Sigulda (N 57° 09.410 E 024° 52.194), Latvia. The system was designed and optimised using TRNSYS - a dynamic simulation tool. The pilot project was continuously monitored. To the analysis the heat transfer fluid flow rate and the influence of the inlet temperature on the performance of solar collectors were subjected. The thermal performance of a solar collector loop was studied using a direct method. A multiple regression analysis was carried out using STATGRAPHICS Centurion 16.1.15 with the aim to identify the operational and weather parameters of the system which cause the strongest influence on the collector's performance. The parameters to be used for the system's optimisation have been evaluated.

Investigating the functional neuroanatomy of concrete and abstract word processing through direct electric stimulation (DES) during awake surgery.

PubMed

Orena, E F; Caldiroli, D; Acerbi, F; Barazzetta, I; Papagno, C

2018-06-05

Neuropsychological, neuroimaging and electrophysiological studies demonstrate that abstract and concrete word processing relies not only on the activity of a common bilateral network but also on dedicated networks. The neuropsychological literature has shown that a selective sparing of abstract relative to concrete words can be documented in lesions of the left anterior temporal regions. We investigated concrete and abstract word processing in 10 patients undergoing direct electrical stimulation (DES) for brain mapping during awake surgery in the left hemisphere. A lexical decision and a concreteness judgment task were added to the neuropsychological assessment during intra-operative monitoring. On the concreteness judgment, DES delivered over the inferior frontal gyrus significantly decreased abstract word accuracy while accuracy for concrete words decreased when the anterior temporal cortex was stimulated. These results are consistent with a lexical-semantic model that distinguishes between concrete and abstract words related to different neural substrates in the left hemisphere.

Global nuclear industry views: challenges arising from the evolution of the optimisation principle in radiological protection.

PubMed

Saint-Pierre, S

2012-01-01

Over the last few decades, the steady progress achieved in reducing planned exposures of both workers and the public has been admirable in the nuclear sector. However, the disproportionate focus on tiny public exposures and radioactive discharges associated with normal operations came at a high price, and the quasi-denial of a risk of major accident and related weaknesses in emergency preparedness and response came at an even higher price. Fukushima has unfortunately taught us that radiological protection (RP) for emergency and post-emergency situations can be much more than a simple evacuation that lasts 24-48 h, with people returning safely to their homes soon afterwards. On optimisation of emergency and post-emergency exposures, the only 'show in town' in terms of international RP policy improvements has been the issuance of the 2007 Recommendations of the International Commission on Radiological Protection (ICRP). However, no matter how genuine these improvements are, they have not been 'road tested' on the practical reality of severe accidents. Post-Fukushima, there is a compelling case to review the practical adequacy of key RP notions such as optimisation, evacuation, sheltering, and reference levels for workers and the public, and to amend these notions with a view to making the international RP system more useful in the event of a severe accident. On optimisation of planned exposures, the reality is that, nowadays, margins for further reductions of public doses in the nuclear sector are very small, and the smaller the dose, the greater the extra effort needed to reduce the dose further. If sufficient caution is not exercised in the use of RP notions such as dose constraints, there is a real risk of challenging nuclear power technologies beyond safety reasons. For nuclear new build, it is the optimisation of key operational parameters of nuclear power technologies (not RP) that is of paramount importance to improve their overall efficiency. In pursuing further improvements in the international RP system, it should be clearly borne in mind that the system is generally based on protection against the risk of cancer and hereditary diseases. The system also protects against deterministic non-cancer effects on tissues and organs. In seeking refinements of such protective notions, ICRP is invited to pay increased attention to the fact that a continued balance must be struck between beneficial activities that cause exposures and protection. The global nuclear industry is committed to help overcome these key RP issues as part of the RP community's upcoming international deliberations towards a more efficient international RP system. Copyright © 2012. Published by Elsevier Ltd.

47 CFR 80.5 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... located on a ship's navigational bridge or main control station operating on a specified frequency which... Union Radiocommunication (ITU-R) Sector, used to establish contact with a station or group of stations... (ITU), Place des Nations, CH-1211 Geneva 20, Switzerland. Direction finder (radio compass). Apparatus...

47 CFR 80.5 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-10-01

... located on a ship's navigational bridge or main control station operating on a specified frequency which... Union Radiocommunication (ITU-R) Sector, used to establish contact with a station or group of stations... (ITU), Place des Nations, CH-1211 Geneva 20, Switzerland. Direction finder (radio compass). Apparatus...

Multidisciplinary design optimisation of a recurve bow based on applications of the autogenetic design theory and distributed computing

NASA Astrophysics Data System (ADS)

Fritzsche, Matthias; Kittel, Konstantin; Blankenburg, Alexander; Vajna, Sándor

2012-08-01

The focus of this paper is to present a method of multidisciplinary design optimisation based on the autogenetic design theory (ADT) that provides methods, which are partially implemented in the optimisation software described here. The main thesis of the ADT is that biological evolution and the process of developing products are mainly similar, i.e. procedures from biological evolution can be transferred into product development. In order to fulfil requirements and boundary conditions of any kind (that may change at any time), both biological evolution and product development look for appropriate solution possibilities in a certain area, and try to optimise those that are actually promising by varying parameters and combinations of these solutions. As the time necessary for multidisciplinary design optimisations is a critical aspect in product development, ways to distribute the optimisation process with the effective use of unused calculating capacity, can reduce the optimisation time drastically. Finally, a practical example shows how ADT methods and distributed optimising are applied to improve a product.

Situational Awareness in Aerospace Operations (La Perception de la Situation au cours des Operations Aeriennes)

DTIC Science & Technology

1990-04-01

addition to a detailed description of the Situation Awareness Global Assessment Technique (SAGAT). SAGAT was developed as an objective measure of a... developed aircraft designs and training programs hinges on en objective evaluation program that considers the global SA reqluirements of the pilot. Bsy...roll-attitudae recovery [323, and that thickened negative pitch lines (simulating lirm grad-ents) are particularly effective in improving

A Designer’s Guide to Human Performance Modelling (La Modelisation des Performances Humaines: Manuel du Concepteur).

DTIC Science & Technology

1998-12-01

failure detection, monitoring, and decision making.) moderator function. Originally, the output from these One of the best known OCM implementations, the...imposed by the tasks themselves, the information and equipment provided, the task environment, operator skills and experience, operator strategies , the...problem-solving situation, including the toward failure.) knowledge necessary to generate the right problem- solving strategies , the attention that

Dielectric elastomer memory

NASA Astrophysics Data System (ADS)

O'Brien, Benjamin M.; McKay, Thomas G.; Xie, Sheng Q.; Calius, Emilio P.; Anderson, Iain A.

2011-04-01

Life shows us that the distribution of intelligence throughout flexible muscular networks is a highly successful solution to a wide range of challenges, for example: human hearts, octopi, or even starfish. Recreating this success in engineered systems requires soft actuator technologies with embedded sensing and intelligence. Dielectric Elastomer Actuator(s) (DEA) are promising due to their large stresses and strains, as well as quiet flexible multimodal operation. Recently dielectric elastomer devices were presented with built in sensor, driver, and logic capability enabled by a new concept called the Dielectric Elastomer Switch(es) (DES). DES use electrode piezoresistivity to control the charge on DEA and enable the distribution of intelligence throughout a DEA device. In this paper we advance the capabilities of DES further to form volatile memory elements. A set reset flip-flop with inverted reset line was developed based on DES and DEA. With a 3200V supply the flip-flop behaved appropriately and demonstrated the creation of dielectric elastomer memory capable of changing state in response to 1 second long set and reset pulses. This memory opens up applications such as oscillator, de-bounce, timing, and sequential logic circuits; all of which could be distributed throughout biomimetic actuator arrays. Future work will include miniaturisation to improve response speed, implementation into more complex circuits, and investigation of longer lasting and more sensitive switching materials.

Validating Human Performance Models of the Future Orion Crew Exploration Vehicle

NASA Technical Reports Server (NTRS)

Wong, Douglas T.; Walters, Brett; Fairey, Lisa

2010-01-01

NASA's Orion Crew Exploration Vehicle (CEV) will provide transportation for crew and cargo to and from destinations in support of the Constellation Architecture Design Reference Missions. Discrete Event Simulation (DES) is one of the design methods NASA employs for crew performance of the CEV. During the early development of the CEV, NASA and its prime Orion contractor Lockheed Martin (LM) strived to seek an effective low-cost method for developing and validating human performance DES models. This paper focuses on the method developed while creating a DES model for the CEV Rendezvous, Proximity Operations, and Docking (RPOD) task to the International Space Station. Our approach to validation was to attack the problem from several fronts. First, we began the development of the model early in the CEV design stage. Second, we adhered strictly to M&S development standards. Third, we involved the stakeholders, NASA astronauts, subject matter experts, and NASA's modeling and simulation development community throughout. Fourth, we applied standard and easy-to-conduct methods to ensure the model's accuracy. Lastly, we reviewed the data from an earlier human-in-the-loop RPOD simulation that had different objectives, which provided us an additional means to estimate the model's confidence level. The results revealed that a majority of the DES model was a reasonable representation of the current CEV design.

Etude analytique du fonctionnement des moteurs à réluctance alimentés à fréquence variable

NASA Astrophysics Data System (ADS)

Sargos, F. M.; Gudefin, E. J.; Zaskalicky, P.

1995-03-01

In switched reluctance motors fed by a constant voltage source (like a battery) at high frequencies, the current becomes unpredictable and often cannot reach a given reference value, because of the variation of the inductances with the rotor position ; the “motional” m.m.f. generates commutation troubles which increase with the frequency. An optimal control as well as an approximate design of the motor require a quick and simple calculation of currents, powers and losses ; now, in principle, the non-linear electrical equation needs a numerical resolution, whose results cannot be extrapolated. By linearizing this equation by intervals, the method proposed here allows to express analytically, in any case, the phase currents, the torque and the copper losses, when the feeding voltage itself is constant by intervals. The model neglects saturation, but a simple adjustment of the inductance (chosen ad libitum) allows to deal with it. The calculation is immediate and perfectly accurate as long as the machine parameters themselves are well defined. Some results are given as examples for two usual feeding modes. Dans les machines à réluctance alimentées à haute fréquence par une source à tension constante, comme une batterie, le courant varie de manière difficilement prévisible, à cause de la variation des inductances avec la position du rotor, et souvent ne parvient pas à s'établir à une valeur de consigne imposée ; la f.é.m. “motionnelle” engendre des difficultés de communication qui s'aggravent avec l'augmentation de fréquence jusqu'à empêcher le fonctionnement. Tant pour optimiser la commande que pour dimensionner approximativement un moteur ; on doit pouvoir calculer simplement et rapidement le courant et la puissance ; or l'équation électrique, non linéaire, doit en principe être résolue numériquement et les résultats ne sont pratiquement pas extrapolables. En linéarisant par intervalles cette équation, la méthode proposée ici permer d'exprimer analytiquement et dans tous les cas les courants de phase, la puissance fournie et les pertes Joule, lorsque la tension aux bornes de l'enroulement est constante par morceaux. Le modèle utilisé néglige la saturation ; mais il est possible de tenir compte de celle-ci par des ajustements, facilement calculables, de la courbe d'inductance, quelle que soit son allure. Les calculs sont immédiats et parfaitement précis pour autant que les paramètres soient bien définis. Quelques résultats sont donnés à titre d'exemple, pour deux modes d'alimentation usuels.

Recruitment and retention. The Derby Theatre Project experience.

PubMed

Ainsworth, David

2003-10-01

The National Theatre Project was set up in March 2001 by the Modernisation Agency to improve the patient and carer experience, improve employee satisfaction, optimise theatre utilisation and reduce cancelled operations. This is the second article in the series where David Ainsworth, manager of a pilot site project in Derby, describes issues around the Theatre Project. This month the focus is on recruitment, retention and staff morale.

Optimisation in radiotherapy. III: Stochastic optimisation algorithms and conclusions.

PubMed

Ebert, M

1997-12-01

This is the final article in a three part examination of optimisation in radiotherapy. Previous articles have established the bases and form of the radiotherapy optimisation problem, and examined certain types of optimisation algorithm, namely, those which perform some form of ordered search of the solution space (mathematical programming), and those which attempt to find the closest feasible solution to the inverse planning problem (deterministic inversion). The current paper examines algorithms which search the space of possible irradiation strategies by stochastic methods. The resulting iterative search methods move about the solution space by sampling random variates, which gradually become more constricted as the algorithm converges upon the optimal solution. This paper also discusses the implementation of optimisation in radiotherapy practice.

Methodologie de conception numerique d'un ventilateur helico-centrifuge basee sur l'emploi du calcul meridien

NASA Astrophysics Data System (ADS)

Lallier-Daniels, Dominic

La conception de ventilateurs est souvent basée sur une méthodologie « essais/erreurs » d'amélioration de géométries existantes ainsi que sur l'expérience de design et les résultats expérimentaux cumulés par les entreprises. Cependant, cette méthodologie peut se révéler coûteuse en cas d'échec; même en cas de succès, des améliorations significatives en performance sont souvent difficiles, voire impossibles à obtenir. Le projet présent propose le développement et la validation d'une méthodologie de conception basée sur l'emploi du calcul méridien pour la conception préliminaire de turbomachines hélico-centrifuges (ou flux-mixte) et l'utilisation du calcul numérique d'écoulement fluides (CFD) pour la conception détaillée. La méthode de calcul méridien à la base du processus de conception proposé est d'abord présentée. Dans un premier temps, le cadre théorique est développé. Le calcul méridien demeurant fondamentalement un processus itératif, le processus de calcul est également présenté, incluant les méthodes numériques de calcul employée pour la résolution des équations fondamentales. Une validation du code méridien écrit dans le cadre du projet de maîtrise face à un algorithme de calcul méridien développé par l'auteur de la méthode ainsi qu'à des résultats de simulation numérique sur un code commercial est également réalisée. La méthodologie de conception de turbomachines développée dans le cadre de l'étude est ensuite présentée sous la forme d'une étude de cas pour un ventilateur hélico-centrifuge basé sur des spécifications fournies par le partenaire industriel Venmar. La méthodologie se divise en trois étapes: le calcul méridien est employé pour le pré-dimensionnement, suivi de simulations 2D de grilles d'aubes pour la conception détaillée des pales et finalement d'une analyse numérique 3D pour la validation et l'optimisation fine de la géométrie. Les résultats de calcul méridien sont en outre comparés aux résultats de simulation pour la géométrie 3D afin de valider l'emploi du calcul méridien comme outil de prédimensionnement. Mots-clés Turbomachines hélico-centrifuges, Calcul méridien, Simulation numérique d'écoulement fluide, Conception numérique de turbomachines.

Optimising predictor domains for spatially coherent precipitation downscaling

NASA Astrophysics Data System (ADS)

Radanovics, S.; Vidal, J.-P.; Sauquet, E.; Ben Daoud, A.; Bontron, G.

2013-10-01

Statistical downscaling is widely used to overcome the scale gap between predictors from numerical weather prediction models or global circulation models and predictands like local precipitation, required for example for medium-term operational forecasts or climate change impact studies. The predictors are considered over a given spatial domain which is rarely optimised with respect to the target predictand location. In this study, an extended version of the growing rectangular domain algorithm is proposed to provide an ensemble of near-optimum predictor domains for a statistical downscaling method. This algorithm is applied to find five-member ensembles of near-optimum geopotential predictor domains for an analogue downscaling method for 608 individual target zones covering France. Results first show that very similar downscaling performances based on the continuous ranked probability score (CRPS) can be achieved by different predictor domains for any specific target zone, demonstrating the need for considering alternative domains in this context of high equifinality. A second result is the large diversity of optimised predictor domains over the country that questions the commonly made hypothesis of a common predictor domain for large areas. The domain centres are mainly distributed following the geographical location of the target location, but there are apparent differences between the windward and the lee side of mountain ridges. Moreover, domains for target zones located in southeastern France are centred more east and south than the ones for target locations on the same longitude. The size of the optimised domains tends to be larger in the southeastern part of the country, while domains with a very small meridional extent can be found in an east-west band around 47° N. Sensitivity experiments finally show that results are rather insensitive to the starting point of the optimisation algorithm except for zones located in the transition area north of this east-west band. Results also appear generally robust with respect to the archive length considered for the analogue method, except for zones with high interannual variability like in the Cévennes area. This study paves the way for defining regions with homogeneous geopotential predictor domains for precipitation downscaling over France, and therefore de facto ensuring the spatial coherence required for hydrological applications.

Considerations for high occupancy vehicle (HOV) to high occupancy toll (HOT) lanes conversions guidebook.

DOT National Transportation Integrated Search

2007-06-01

The intent of this study is to explore the planning, design, and ongoing operation and maintenance of HOT facilities and to provide lessons learned and applicable technical guidance that will assist the state and local transportation planners and des...

ARC Researchers at IEEE 2015 Vehicle Power and Propulsion Conference

Science.gov Websites

Sustainability of the Energy Storage Systems Thursday, October 22, 2015 14:00 PM - 16:00 PM Des Pins Room SS5-1 Influence of Battery Downsizing and SOC Operating Window on Battery Pack Performance in a Hybrid Electric

33 CFR 151.05 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... control system approved by the government of the country under whose authority the ship is operating... scientific research relating to pollution abatement or control. Dishwater means the liquid residue from the... Cap des Rosiers to West Point, Anticosti Island, and, on the north side of Anticosti Island, the...

33 CFR 151.05 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... control system approved by the government of the country under whose authority the ship is operating... scientific research relating to pollution abatement or control. Dishwater means the liquid residue from the... Cap des Rosiers to West Point, Anticosti Island, and, on the north side of Anticosti Island, the...

33 CFR 151.05 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... control system approved by the government of the country under whose authority the ship is operating... scientific research relating to pollution abatement or control. Dishwater means the liquid residue from the... Cap des Rosiers to West Point, Anticosti Island, and, on the north side of Anticosti Island, the...

Modélisation à long terme et optimisation du stock d'énergie des installations solaires autonomes

NASA Astrophysics Data System (ADS)

Maafi, A.; Delorme, C.

1996-04-01

A sizing approach of storage capacity for autonomous solar system has been developed by analyzing the difference between solar radiation input and energy demand on long-term periods. This approach has been implemented using series of daily global irradiation data recorded or generated on a horizontal surface in the meteorological stations of Abidjan (Ivory Coast), Algiers and Tamanrasset (Algeria) and Carpentras (France). The obtained results show that for an energy demand equaling the pluriannual mean of solar irradiation a storage of several months is needed to obtain the autonomy of solar systems located in Algiers, Carpentras and Tamanrasset. It should be too expensive investment to set-up such solar systems in these locations. Therefore, the size of the storage is minimized by using a non-zero initial energy storage and reducing the energy demand. This procedure show that it is possible to provide every day a programmed energy using autonomous solar systems which are competitive economically. Une approche de dimensionnement de la capacité de stockage des installations solaires autonomes a été développé. Elle est basée sur l'analyse de la différence entre l'énergie incidente et la consommation requise. Cette méthode a été mise au point à partir de données journalières d'irradiation globale enregistrées ou reconstituées sur plan horizontal dans les stations météorologiques d'Abidjan (Côte d'Ivoire), d'Alger et de Tamanrasset (Algérie) et de Carpentras (France). Pour une demande énergétique correspondant à la production moyenne pluriannuelle d'énergie solaire, les résultats montrent qu'un stockage de plusieurs mois est requis pour garantir l'autonomie de fonctionnement des installations solaires implantées à Alger, Carpentras et Tamanrasset. L'autonomie ainsi obtenue n'est pas économiquement rentable. Aussi, la taille du stockage a été minimisée en utilisant un stock initial d'énergie au démarrage de l'installation et en réduisant la consommation. Ceci a permis de montrer que la couverture de besoins énergétiques planifiés à l'aide d'installations solaires autonomes, compétitives sur le plan économique, est possible.

Use of DES Modeling for Determining Launch Availability for SLS

NASA Technical Reports Server (NTRS)

Watson, Michael; Staton, Eric; Cates, Grant; Finn, Ronald; Altino, Karen M.; Burns, K. Lee

2014-01-01

(1) NASA is developing a new heavy lift launch system for human and scientific exploration beyond Earth orbit comprising of the Space Launch System (SLS), Orion Multi-Purpose Crew Vehicle (MPCV), and Ground Systems Development and Operations (GSDO); (2) The desire of the system is to ensure a high confidence of successfully launching the exploration missions, especially those that require multiple launches, have a narrow Earth departure window, and high investment costs; and (3) This presentation discusses the process used by a Cross-Program team to develop the Exploration Systems Development (ESD) Launch Availability (LA) Technical Performance Measure (TPM) and allocate it to each of the Programs through the use of Discrete Event Simulations (DES).

Helicopter Maritime Environment Trainer: Operational Software CSCI Version Description Document (Simulateur D’Entrainement Virtuel pour Helicoptere Maritime: Logiciel Operationnel CSCI, Document de Description de la Version)

DTIC Science & Technology

2011-06-01

d’envol d’une frégate canadienne de patrouille dans un environnement virtuel. Le système HelMET a été installé à la 12e Escadre, Base des Forces...d’une frégate canadienne de patrouille dans un environnement virtuel. Le système HelMET a été installé à la 12e Escadre, Base des Forces canadiennes...afin d’entraîner les pilotes d’hélicoptère à l’atterrissage sur le pont d’envol d’une frégate canadienne de patrouille dans un environnement virtuel

Supporting Uncertainty Reasoning in SIMulated Operators for Networks (SIMON) (Le support du raisonnement dans l’incertitude pour des operateurs simules dans un reseau)

DTIC Science & Technology

2005-12-01

moteur de simulation de l’Environnement Intégré de Modélisation de la Performance est utilisé de pair avec l’approche pour démontrer comment des...d’être utilisé dans les forces générées par ordinateur. Le travail ultérieur inclura plus d’essais, l’intégration avec les moteurs de simulateurs et...Aspects are reasoning units relevant to simulated tasks. Each Aspect schema is a 4-tuple: AspectSchema = <MA, WM, LM, CL>, where MA refers to meta

Semi-relativistic quark-antiquark potential models

NASA Astrophysics Data System (ADS)

Basdevant, J. L.; Boukraa, S.

We study the qualitative and quantitative properties of the spectrum of a two-body hamiltonian with relativistic kinematics. We show that this kinematics leads in a natural way to the observed features of light flavour (u, d, s) spectroscopy. After having established the basic properties of the operator √ p2 + m2 + V(r) in the cases of linear or logarithmic potentials, we show that, to first approximation, all q1 q2 meson states can be reproduced with a very simple universal flavour-independent potential whose parameters are directly related to basic physical quantities : the Regge slopes of light flavours and the quasi-logarithmic coupling strength of heavy quarks. We can derive equivalent effective non-relativistic hamiltonians which justify the successes of NR approaches. The main difficulties encountered, in particular in incorporating spin effects, appear to be due to the fact that, in phenomenological potential models, chiral symmetry and the ensuing Goldstone nature of the pion cannot be implemented in a natural way. Hence, such an approach can take its full predictive power only if it is based on a deeper field-theoretic level. Devant le succès spectaculaire des modèles potentiels pour la spectroscopie des états formés de quarks lourds (cc, bb, etc.), il est tentant d'essayer d'étendre de tels modèles aux états comprenant des quarks légers, u, d et s. En particulier, la spectroscopie des états mésoniques « lourds » est phénoménologiquement dominée par l'existence d'un potentiel confinant universel, quasi logarithmique entre 0,1 fm et 1 fm, tandis que celle des états légers se décrit de façon simple par des trajectoires de Regge linéaires qui ont une pente universelle. 11 est donc légitime de se demander s'il s'agit là de deux secteurs disjoints du monde hadronique, ou bien s'il existe une certaine unité dans la spectroscopie mésonique au plan phénoménologique. Cependant, en présence de quarks légers, voire de masse nulle, les modèles non relativistes traditionnellement utilisés sont sujets à des critiques évidentes. 11 est donc naturel de mettre à l'épreuve des modèles semi-relativistes, c'est-à-dire des hamiltoniens à cinématique relativiste, qui constituent l'extension la plus simple des modèles non relativistes. Nous étudions ici les propriétés qualitatives et quantitatives des spectres d'hamiltoniens de ce type. Nous montrons que l'usage de la cinématique relativiste rend compte de façon naturelle des caractéristiques principales de la spectroscopie des saveurs légères (u, d, s). Après avoir établi les propriétés essentielles de l'opérateur (p2 + m2)1/2 + V(r) dans le cas du potentiel linéaire et du potentiel logarithmique, nous montrons qu'en première approximation tous les états q1 q2 peuvent être obtenus avec un potentiel universel, indépendant de la saveur, extrêmement simple. Les paramètres de ce potentiel sont directement reliés à des grandeurs physiques de base : la pente universelle des trajectoires de Regge des états légers d'une part, la constante de couplage du potentiel logarithmique des états lourds de l'autre. Nous obtenons des hamiltoniens effectifs non relativistes équivalents qui justifient en un certain sens le succès des approches non relativistes. Les principales difficultés que l'on rencontre, en particulier lorsqu'on tente d'incorporer les corrections de structure fine et hyperfine, semblent provenir de ce que la symétrie chirale, et sa conséquence que le méson soit pratiquement un boson de Goldstone, ne peut être incorporée de façon simple et naturelle dans un modèle hamiltonien. En conséquence, une pareille approche ne peut prendre sa pleine puissance prédictive (avec un nombre restreint de paramètres) que si elle est fondée sur des bases plus profondes déduites d'une théorie des champs.

Pertinence et limitations de la loi de Mott dans les isolants désordonnés

NASA Astrophysics Data System (ADS)

Ladieu, François; Sanquer, Marc

Twenty five years ago, Mott's law was established in order to describe electrical transport in disordered insulators at low temperature. In this review, we briefly summarize the different theoretical steps involved in the rigourous derivation of Mott's law. We stress upon the fact that Mott's law gives the mean conductance of an ensemble of macroscopic samples as long as electron-electron interactions remain negligible. We then study what happens when at least one of the key assumptions of Mott's law no longer holds. We first focus on systems whose size — at least in one dimension — is not macroscopic: the optimization involved in Mott's law is no longer relevant for the measured conductance. Eventually, we try to gather different works dealing with electron-electron interactions. It is now established that interactions generally produce a stronger divergence for the electrical resistance than the one predicted by Mott's law at the lowest temperatures. But the exact shape of this divergence, as well as its interpretation, remain debated. We try to make a link between Efros and Shklovskii 's work and their famous "Coulomb gap" and a more recent work about granular media. In this latter work, the size of the grains is the key parameter for the shape of the divergence of the resistance at low temperature. We suggest this could indicate a way for a model accounting for the different shapes of divergence of the electrical resistance at the lowest temperatures. Furthermore this framework of granular media allows us to deal with non linear regime: we explain the main differences between the predictions of the hot electrons model and the ones recently derived for a d -dimensional network of grains. Il y a déjà un quart de siècle que la loi de Mott a été établie afin de décrire le transport dans les milieux isolants désordonnés à basse température. Dans cet article de revue, nous rappelons brièvement les diverses étapes théoriques nécessaires à l'établissement rigoureux de la loi de Mott. Nous insistons sur le fait que la loi de Mott ne donne que la conductance moyenne d'un ensemble d'échantillons macroscopiques, tant que les interactions entre électrons restent négligeables. Nous étudions ensuite ce qu'il se passe lorsque l'on lève au moins l'une des hypothèses nécessaires à l'établissement de la loi de Mott. Nous nous penchons d'abord sur le cas des systèmes dont au moins une dimension n'est pas macroscopique : l'optimisation contenue dans la loi de Mott n'est alors plus représentative de la conductance mesurée. Enfin, nous essayons de rassembler des travaux relatifs aux effets des interactions entre électrons. S'il est acquis que, de façon générale, les interactions entraînent une divergence de la résistance plus rapide que ne le prédit la loi de Mott aux plus basses températures, la forme exacte de cette divergence ainsi que son interprétation restent encore sujets à caution. Nous rapprochons le travail d'Efros et Shklovskii et leur célèbre "gap de Coulomb" d'un travail plus récent sur les milieux granulaires dans lequel la taille des grains joue un rôle discriminant sur la nature de la divergence de la résistance à basse température. Nous suggérons que ce rapprochement ouvre une piste pour un modèle rendant compte de manière unifiée des diverses divergences mesurées à basse température pour la résistance électrique. Cette incursion dans les modèles granulaires nous permet aussi d'aborder la question des non linéarités en exposant les différences entre les prédictions du modèle des électrons chauds et celles proposées récemment pour un réseau de grains en dimension d .

Mapping the Relevance of Complex Decision Making to Canadian Forces Land Operations (Mappage de la pertinence de la prise de d cisions complexes pour les op rations terrestres des Forces canadiennes)

DTIC Science & Technology

2011-03-01

operations erent types of lenge categor le pattern of of scenarios, ersonnel are nalysis s based upon . See Section t question th iffer on their...environmen change may Multiple con achievable a Underspecif Independent (they may h tential scen e complexity verall areas t ere both con ry operations rather...scenario de iption of the ghanistan operations co t as a liaison hanistan Nat of Security (N here was a m ut the level o in security. I security in

Development and experimental characterization of a pneumatic valve actuated by a dielectric elastomer membrane

NASA Astrophysics Data System (ADS)

Hill, Marc; Rizzello, Gianluca; Seelecke, Stefan

2017-08-01

Due to their many features including lightweight and low energy consumption, dielectric elastomer (DE) membrane actuators are of interest for a number of industrial applications, such as pumping systems or valve control units. In particular, the use of DEs in valve control units offers advantages over traditional solenoid valves, including lower power requirements and relative simplicity in achieving proportional control. Additionally, DEs generate low thermal dissipation and are capable of virtually silent operation. The contribution of this work is the development of a new valve system based on a circular DE membrane pre-loaded with a linear spring. The valve is designed for pressurized air and operates by actuating a lever mechanism that opens and closes an outlet port. After presenting the operating principle and system design, several experiments are presented to compare actuator force, stroke, and dissipated energy for several pressure differentials and associated volume flows. It is observed that the DE-driven valve achieves a performance similar to a solenoid-based valve, while requiring a significantly lower amount of input energy. In addition, it is shown that DE-membrane valves can be controlled proportionally by simply adjusting the actuator voltage.

Analyse des possibilités de fonctionnement en régime des désexcitation des moteurs à aimants permanents

NASA Astrophysics Data System (ADS)

Multon, Bernard; Lucidarme, Jean; Prévond, Laurent

1995-05-01

In this paper, we study the extending of speed range of motors (or generators) with permanent magnet inductor and supplied by electronic converter. The amplitude of phase voltage and current waveforms are limited by electronics supply. The aim of this study is to achieve a maximum power near of the base speed one on an extended speed range. This require an airgap flux weakening so called “flux weakening” above base speed. A parametric analysis of motor electromagnetic characteristics is made to show the influence of armature reaction and magnetic saliency on speed range. We show that exists an ideal condition to obtain a constant power speed range theoretically unlimited. Magnetic saliency permits to enhance the power factor especially when L_d> L_q. As main hypotheses, we consider no saturation, e.m.f. and current sine waveforms and a sinusoidal airgap flux density. Finally, we recapitulate the permanent magnet rotor structures able to obtain a flux-weakening operation. Cet article traite de l'extension de la plage de vitesse des moteurs (ou alternateurs) à excitation par aimants permanents et alimentés par convertisseur électronique. La tension et le courant sont limités en amplitude par l'alimentation électronique.L'objectif est d'obtenir une puissance proche de celle correspondant au régime de base sur une plage de vitesse étendue. Ceci nécessite une réduction de flux d'entrefer ou “désexition” au delà de la vitesse de base. Une analyse paramétrique des caractéristiques du moteur est effectuée pour mettre en évidence l'influence de la réaction d'induit et de la saillance magnétique. Nous montrons qu'il existe une condition idéale pour obtenir une plage de fonctionnement à puissance constante théoriquement illimitée. La saillance magnétique permet d'accroître le facteur de puissance surtout lorsque L_d> L_q. Les principales hypothèses de cette étude sont l'absence de saturation, des f.e.m. et des courants sinusoïdaux et une induction spatiale sinusoïdale dans l'entrefer. Enfin, nous effectuons un bilan des structures de rotors permettant un fonctionnement en régime de désexcitation.

Optimisation on processing parameters for minimising warpage on side arm using response surface methodology (RSM) and particle swarm optimisation (PSO)

NASA Astrophysics Data System (ADS)

Rayhana, N.; Fathullah, M.; Shayfull, Z.; Nasir, S. M.; Hazwan, M. H. M.; Sazli, M.; Yahya, Z. R.

2017-09-01

This study presents the application of optimisation method to reduce the warpage of side arm part. Autodesk Moldflow Insight software was integrated into this study to analyse the warpage. The design of Experiment (DOE) for Response Surface Methodology (RSM) was constructed and by using the equation from RSM, Particle Swarm Optimisation (PSO) was applied. The optimisation method will result in optimised processing parameters with minimum warpage. Mould temperature, melt temperature, packing pressure, packing time and cooling time was selected as the variable parameters. Parameters selection was based on most significant factor affecting warpage stated by previous researchers. The results show that warpage was improved by 28.16% for RSM and 28.17% for PSO. The warpage improvement in PSO from RSM is only by 0.01 %. Thus, the optimisation using RSM is already efficient to give the best combination parameters and optimum warpage value for side arm part. The most significant parameters affecting warpage are packing pressure.

Metaheuristic optimisation methods for approximate solving of singular boundary value problems

NASA Astrophysics Data System (ADS)

Sadollah, Ali; Yadav, Neha; Gao, Kaizhou; Su, Rong

2017-07-01

This paper presents a novel approximation technique based on metaheuristics and weighted residual function (WRF) for tackling singular boundary value problems (BVPs) arising in engineering and science. With the aid of certain fundamental concepts of mathematics, Fourier series expansion, and metaheuristic optimisation algorithms, singular BVPs can be approximated as an optimisation problem with boundary conditions as constraints. The target is to minimise the WRF (i.e. error function) constructed in approximation of BVPs. The scheme involves generational distance metric for quality evaluation of the approximate solutions against exact solutions (i.e. error evaluator metric). Four test problems including two linear and two non-linear singular BVPs are considered in this paper to check the efficiency and accuracy of the proposed algorithm. The optimisation task is performed using three different optimisers including the particle swarm optimisation, the water cycle algorithm, and the harmony search algorithm. Optimisation results obtained show that the suggested technique can be successfully applied for approximate solving of singular BVPs.

Optimisation study of a vehicle bumper subsystem with fuzzy parameters

NASA Astrophysics Data System (ADS)

Farkas, L.; Moens, D.; Donders, S.; Vandepitte, D.

2012-10-01

This paper deals with the design and optimisation for crashworthiness of a vehicle bumper subsystem, which is a key scenario for vehicle component design. The automotive manufacturers and suppliers have to find optimal design solutions for such subsystems that comply with the conflicting requirements of the regulatory bodies regarding functional performance (safety and repairability) and regarding the environmental impact (mass). For the bumper design challenge, an integrated methodology for multi-attribute design engineering of mechanical structures is set up. The integrated process captures the various tasks that are usually performed manually, this way facilitating the automated design iterations for optimisation. Subsequently, an optimisation process is applied that takes the effect of parametric uncertainties into account, such that the system level of failure possibility is acceptable. This optimisation process is referred to as possibility-based design optimisation and integrates the fuzzy FE analysis applied for the uncertainty treatment in crash simulations. This process is the counterpart of the reliability-based design optimisation used in a probabilistic context with statistically defined parameters (variabilities).

Characterisation of Vanilla—A novel active pixel sensor for radiation detection

NASA Astrophysics Data System (ADS)

Blue, A.; Bates, R.; Laing, A.; Maneuski, D.; O'Shea, V.; Clark, A.; Prydderch, M.; Turchetta, R.; Arvanitis, C.; Bohndiek, S.

2007-10-01

Novel features of a new monolithic active pixel sensor, Vanilla, with 520×520 pixels ( 25 μm square) has been characterised for the first time. Optimisation of the sensor operation was made through variation of frame rates, integration times and on-chip biases and voltages. Features such as flushed reset operation, ROI capturing and readout modes have been fully tested. Stability measurements were performed to test its suitablility for long-term applications. These results suggest the Vanilla sensor—along with bio-medical and space applications—is suitable for use in particle physics experiments.

Building Partnership Capacity: Operation Harmattan and Beyond

DTIC Science & Technology

2012-10-01

exclusion zone over Deauville, Normandy, during the G -8 conference in May 2011.27 Further, beginning 1 July, the FAF took the lead of NATO Response... Planification et de Conduite des Opérations (Joint Operations and Planning Center) in Paris. The French chief of defense staff presented the imagery...Institut Charles de Gaulle, accessed 26 July 2012, http://de-gaulle-edu.net/sentrainer/trois_commt/certaineidee.htm. 79. Leo G . Michel, Cross-Currents

Wind tunnel tests on two-dimensional air intakes at DRDC Valcartier

DTIC Science & Technology

2009-04-01

systems. Accurate experimental data on the performance parameters of ramjet air intakes at different angles of attack during on- and off- design operation...supersoniques en raison de leurs meilleures performances au point de vue portée et vitesse comparativement à la propulsion avec des propergols solides. RDDC...during on- and off- design operation are required in order to verify the accuracy of numerical models. However, the open literature survey revealed

Evaluation of ATV Track Systems for Winter Mountain Operations

DTIC Science & Technology

2011-06-01

charge utile. Importance des résultats et perspectives : Selon ces essais limités, comparativement à une motoneige moderne, les VTT à chenilles...of this document, but the products seem similar in design , with subtle differences in frame, suspension, track depth, etc. Each of the companies sell...because the transmission of this vehicle seems to be designed for high-speed operation, rather than low-speed torque. It should also be noted that the

Degradation of diclofenac sodium using combined processes based on hydrodynamic cavitation and heterogeneous photocatalysis.

PubMed

Bagal, Manisha V; Gogate, Parag R

2014-05-01

Diclofenac sodium, a widely detected pharmaceutical drug in wastewater samples, has been selected as a model pollutant for degradation using novel combined approach of hydrodynamic cavitation and heterogeneous photocatalysis. A slit venturi has been used as cavitating device in the hydrodynamic cavitation reactor. The effect of various operating parameters such as inlet fluid pressure (2-4 bar) and initial pH of the solution (4-7.5) on the extent of degradation have been studied. The maximum extent of degradation of diclofenac sodium was obtained at inlet fluid pressure of 3 bar and initial pH as 4 using hydrodynamic cavitation alone. The loadings of TiO2 and H2O2 have been optimised to maximise the extent of degradation of diclofenac sodium. Kinetic study revealed that the degradation of diclofenac sodium fitted first order kinetics over the selected range of operating protocols. It has been observed that combination of hydrodynamic cavitation with UV, UV/TiO2 and UV/TiO2/H2O2 results in enhanced extents of degradation as compared to the individual schemes. The maximum extent of degradation as 95% with 76% reduction in TOC has been observed using hydrodynamic cavitation in conjunction with UV/TiO2/H2O2 under the optimised operating conditions. The diclofenac sodium degradation byproducts have been identified using LC/MS analysis. Copyright © 2013 Elsevier B.V. All rights reserved.

Developpement d'un montage simulant l'erosion par la pluie pour l'evaluation des revetements glaciophobes dans le domaine aerospatial

NASA Astrophysics Data System (ADS)

Tremblay, Sarah-Eve

Ce memoire presente le developpement d’un montage simulant l’erosion par la pluie afin d’effectuer l’evaluation de differents revetements glaciophobes dans le domaine aerospatial. Bien que plusieurs revetements presentent une bonne efficacite a reduire l’adherence et/ou l’accumulation de glace, ils ne repondent pas necessairement aux normes de resistance a l’erosion simulee par les gouttes de pluie les frappant a grande vitesse. Il n’existe qu’une installation en Amerique du Nord offrant un service d’essai qui evalue la resistance a l’erosion par la pluie suivant les normes aerospatiales. Etant l’unique institution pouvant faire la certification de peintures utilisees sur les avions en ce qui a trait a l’erosion par la pluie, ce service est donc difficile d’acces et couteux. Le laboratoire international des materiaux antigivre (LIMA) a developpe un essai plus rapide et moins couteux, facilitant ainsi le developpement de revetements glaciophobes devant resister a l’erosion par la pluie. Dans cette etude, le developpement du montage d’erosion par la pluie effectue au laboratoire des materiaux antigivre (LIMA) est presente. En particulier, des essais sur quatre (4) revetements dont la resistance a l’erosion est connue, et sur trois revetements industriels, ont ete effectues afin d’ajuster les differents parametres du montage comme la pression et la temperature de l’eau ainsi que la robustesse du montage. Ensuite, des essais de sensibilite et de reproductibilite des resultats ont egalement ete effectues pour fin de validation du montage et du protocole experimental. Pour ce faire, le montage de type jet d’eau developpe consiste principalement en une pompe a haute pression qui projette un jet d’eau continu passant par les orifices d’un disque tournant. Cette operation permet de generer une goutte de pluie simulee qui est projetee sur un echantillon de revetement statique. L’essai est base sur la norme standard ASTM (Liquid Impingement Erosion Testing, G73-82). La resistance a l’erosion du materiau est determinee a l’aide du nombre d’impacts subi par l’echantillon obtenu avant la production de dommages visibles. Donc, pour determiner le niveau d’erosion, quatre sites d’impacts doivent etre erodes sur cinq sur le meme rang pour le meme nombre d’impact. L’analyse des quatre revetements de resistance a l’erosion connus a ete completee par l’examen microscopique de chaque site d’impact et d’une photo. Le choix des quatre revetements de resistance a l’erosion connue, allant du plus resistant au moins resistant, a permis de verifier que le montage etait assez sensible pour evaluer les revetements souvent utilises dans le domaine aerospatial. De plus, l’evaluation des trois revetements industriels a permis, pour sa part, de confirmer les resultats obtenus precedemment. Finalement, pour evaluer la sensibilite et la reproductibilite des resultats, de deux a six repetitions pour chaque revetement a ete effectuees donnant des taux d’erosion allant de 100 a 100 000 impacts. L’intervalle des ecarts-types varie de ± 0% a ± 47% pour une moyenne de ± 17%. Le critere d’echec a ete determine a l’aide du nombre d’impacts avant l’apparition de dommage visible ainsi que de la repetabilite des resultats.

Considerations for high occupancy vehicle (HOV) lane to high occupancy toll (HOT) lane conversions guidebook

DOT National Transportation Integrated Search

2007-06-01

The intent of this study is to explore the planning, design, and ongoing operation and maintenance of HOT facilities and to provide lessons learned and applicable technical guidance that will assist the state and local transportation planners and des...

Airlift Operation Modeling Using Discrete Event Simulation (DES)

DTIC Science & Technology

2009-12-01

Java ......................................................................................................20 2. Simkit...JRE Java Runtime Environment JVM Java Virtual Machine lbs Pounds LAM Load Allocation Mode LRM Landing Spot Reassignment Mode LEGO Listener Event...SOFTWARE DEVELOPMENT ENVIRONMENT The following are the software tools and development environment used for constructing the models. 1. Java Java

Stochastic optimisation of water allocation on a global scale

NASA Astrophysics Data System (ADS)

Schmitz, Oliver; Straatsma, Menno; Karssenberg, Derek; Bierkens, Marc F. P.

2014-05-01

Climate change, increasing population and further economic developments are expected to increase water scarcity for many regions of the world. Optimal water management strategies are required to minimise the water gap between water supply and domestic, industrial and agricultural water demand. A crucial aspect of water allocation is the spatial scale of optimisation. Blue water supply peaks at the upstream parts of large catchments, whereas demands are often largest at the industrialised downstream parts. Two extremes exist in water allocation: (i) 'First come, first serve,' which allows the upstream water demands to be fulfilled without considerations of downstream demands, and (ii) 'All for one, one for all' that satisfies water allocation over the whole catchment. In practice, water treaties govern intermediate solutions. The objective of this study is to determine the effect of these two end members on water allocation optimisation with respect to water scarcity. We conduct this study on a global scale with the year 2100 as temporal horizon. Water supply is calculated using the hydrological model PCR-GLOBWB, operating at a 5 arcminutes resolution and a daily time step. PCR-GLOBWB is forced with temperature and precipitation fields from the Hadgem2-ES global circulation model that participated in the latest coupled model intercomparison project (CMIP5). Water demands are calculated for representative concentration pathway 6.0 (RCP 6.0) and shared socio-economic pathway scenario 2 (SSP2). To enable the fast computation of the optimisation, we developed a hydrologically correct network of 1800 basin segments with an average size of 100 000 square kilometres. The maximum number of nodes in a network was 140 for the Amazon Basin. Water demands and supplies are aggregated to cubic kilometres per month per segment. A new open source implementation of the water allocation is developed for the stochastic optimisation of the water allocation. We apply a Genetic Algorithm for each segment to estimate the set of parameters that distribute the water supply for each node. We use the Python programming language and a flexible software architecture allowing to straightforwardly 1) exchange the process description for the nodes such that different water allocation schemes can be tested 2) exchange the objective function 3) apply the optimisation either to the whole catchment or to different sub-levels and 4) use multi-core CPUs concurrently and therefore reducing computation time. We demonstrate the application of the scientific workflow to the model outputs of PCR-GLOBWB and present first results on how water scarcity depends on the choice between the two extremes in water allocation.

LAN attack detection using Discrete Event Systems.

PubMed

Hubballi, Neminath; Biswas, Santosh; Roopa, S; Ratti, Ritesh; Nandi, Sukumar

2011-01-01

Address Resolution Protocol (ARP) is used for determining the link layer or Medium Access Control (MAC) address of a network host, given its Internet Layer (IP) or Network Layer address. ARP is a stateless protocol and any IP-MAC pairing sent by a host is accepted without verification. This weakness in the ARP may be exploited by malicious hosts in a Local Area Network (LAN) by spoofing IP-MAC pairs. Several schemes have been proposed in the literature to circumvent these attacks; however, these techniques either make IP-MAC pairing static, modify the existing ARP, patch operating systems of all the hosts etc. In this paper we propose a Discrete Event System (DES) approach for Intrusion Detection System (IDS) for LAN specific attacks which do not require any extra constraint like static IP-MAC, changing the ARP etc. A DES model is built for the LAN under both a normal and compromised (i.e., spoofed request/response) situation based on the sequences of ARP related packets. Sequences of ARP events in normal and spoofed scenarios are similar thereby rendering the same DES models for both the cases. To create different ARP events under normal and spoofed conditions the proposed technique uses active ARP probing. However, this probing adds extra ARP traffic in the LAN. Following that a DES detector is built to determine from observed ARP related events, whether the LAN is operating under a normal or compromised situation. The scheme also minimizes extra ARP traffic by probing the source IP-MAC pair of only those ARP packets which are yet to be determined as genuine/spoofed by the detector. Also, spoofed IP-MAC pairs determined by the detector are stored in tables to detect other LAN attacks triggered by spoofing namely, man-in-the-middle (MiTM), denial of service etc. The scheme is successfully validated in a test bed. Copyright © 2010 ISA. Published by Elsevier Ltd. All rights reserved.

A novelty detection diagnostic methodology for gearboxes operating under fluctuating operating conditions using probabilistic techniques

NASA Astrophysics Data System (ADS)

Schmidt, S.; Heyns, P. S.; de Villiers, J. P.

2018-02-01

In this paper, a fault diagnostic methodology is developed which is able to detect, locate and trend gear faults under fluctuating operating conditions when only vibration data from a single transducer, measured on a healthy gearbox are available. A two-phase feature extraction and modelling process is proposed to infer the operating condition and based on the operating condition, to detect changes in the machine condition. Information from optimised machine and operating condition hidden Markov models are statistically combined to generate a discrepancy signal which is post-processed to infer the condition of the gearbox. The discrepancy signal is processed and combined with statistical methods for automatic fault detection and localisation and to perform fault trending over time. The proposed methodology is validated on experimental data and a tacholess order tracking methodology is used to enhance the cost-effectiveness of the diagnostic methodology.

Small lung cancers: improved detection by use of bone suppression imaging--comparison with dual-energy subtraction chest radiography.

PubMed

Li, Feng; Engelmann, Roger; Pesce, Lorenzo L; Doi, Kunio; Metz, Charles E; Macmahon, Heber

2011-12-01

To determine whether use of bone suppression (BS) imaging, used together with a standard radiograph, could improve radiologists' performance for detection of small lung cancers compared with use of standard chest radiographs alone and whether BS imaging would provide accuracy equivalent to that of dual-energy subtraction (DES) radiography. Institutional review board approval was obtained. The requirement for informed consent was waived. The study was HIPAA compliant. Standard and DES chest radiographs of 50 patients with 55 confirmed primary nodular cancers (mean diameter, 20 mm) as well as 30 patients without cancers were included in the observer study. A new BS imaging processing system that can suppress the conspicuity of bones was applied to the standard radiographs to create corresponding BS images. Ten observers, including six experienced radiologists and four radiology residents, indicated their confidence levels regarding the presence or absence of a lung cancer for each lung, first by using a standard image, then a BS image, and finally DES soft-tissue and bone images. Receiver operating characteristic (ROC) analysis was used to evaluate observer performance. The average area under the ROC curve (AUC) for all observers was significantly improved from 0.807 to 0.867 with BS imaging and to 0.916 with DES (both P < .001). The average AUC for the six experienced radiologists was significantly improved from 0.846 with standard images to 0.894 with BS images (P < .001) and from 0.894 to 0.945 with DES images (P = .001). Use of BS imaging together with a standard radiograph can improve radiologists' accuracy for detection of small lung cancers on chest radiographs. Further improvements can be achieved by use of DES radiography but with the requirement for special equipment and a potential small increase in radiation dose. © RSNA, 2011.

Jonction Josephson en couche épaisse d'oxydes supraconducteurs

NASA Astrophysics Data System (ADS)

Gunther, C.; Monfort, Y.; Sing, M. Lam Chok; Bloyet, D.; Brousse, T.; Provost, J.; Raveau, B.

1992-02-01

Constrictions engraved in YBaCuO thick films fabricated by screen printing on YSZ substrate (J_c>3 000 A/cm^2 at 77 K) have been studied. Microwave irradiation of the devices at LN2 showed distinct Shapiro steps demonstrating the presence intrinsic Josephson junctions. The latter have an I_c(T) dependence fitting (1-T/T_c)^2 characteristic of SNS junctions. Furthermore, dc SQUID effects have also been observed with a peak-to-peak response simeq 0.2 μV and with a magnetic field periodicity extending through several hundred of φ_0. An energy resolution close to 3× 10^{-29} J/Hz is estimated for our constriction operating in the white noise frequency range (f>50 Hz) at 77 K. This sensitivity is adequate to use this flux sensor in many applications : geomagnetism, magnetocardiology, ... Nous avons étudié des constrictions gravées dans des couches épaisses d'YBaCuO déposées sur substrat de YSZ (J_c>3 000 A/cm^2 à 77 K). L'observation de marches de Shapiro lors d'irradiations des échantillons à 77 K par un champ HF met clairement en évidence la présence de jonctions Josephson intrinsèques de type SNS, leur dépendance en température du courant critique étant en (1-T/T_c)^2. De plus, nous avons obtenu des réponses en champ magnétique, caractéristiques des SQUIDs dc, d'amplitude 0,2 μVcc et dont la périodicité s'étend sur plusieurs centaines de φ_0. La résolution en énergie est de l'ordre de 3× 10^{-29} J/Hz en zone de bruit blanc (f>50 Hz) à 77 K. Cette sensibilité est suffisante pour envisager son utilisation dans des applications telles que : géomagnétisme, magnétocardiologie, ...

Joint Command Support Through Workspace Analysis, Design and Optimization (Soutien du Commandement Interarmees au Moyen de L’Analyse, de la Conception et de L’Optimisation de L’Espace de Travail)

DTIC Science & Technology

2009-10-01

WACC ); and • Joint Task Force (Games) Joint Operations Centre (GJOC). In May 2008, DRDC Toronto initiated two studies to support the workspace...Voice-over-IP WACC Whistler Area Command Centre DRDC Toronto TR 2009-100 39 Distribution list Document No.: DRDC CR 2009-028 LIST

Employing the therapeutic operating characteristic (TOC) graph for individualised dose prescription.

PubMed

Hoffmann, Aswin L; Huizenga, Henk; Kaanders, Johannes H A M

2013-03-07

In current practice, patients scheduled for radiotherapy are treated according to 'rigid' protocols with predefined dose prescriptions that do not consider risk-taking preferences of individuals. The therapeutic operating characteristic (TOC) graph is applied as a decision-aid to assess the trade-off between treatment benefit and morbidity to facilitate dose prescription customisation. Historical dose-response data from prostate cancer patient cohorts treated with 3D-conformal radiotherapy is used to construct TOC graphs. Next, intensity-modulated (IMRT) plans are generated by optimisation based on dosimetric criteria and dose-response relationships. TOC graphs are constructed for dose-scaling of the optimised IMRT plan and individualised dose prescription. The area under the TOC curve (AUC) is estimated to measure the therapeutic power of these plans. On a continuous scale, the TOC graph directly visualises treatment benefit and morbidity risk of physicians' or patients' choices for dose (de-)escalation. The trade-off between these probabilities facilitates the selection of an individualised dose prescription. TOC graphs show broader therapeutic window and higher AUCs with increasing target dose heterogeneity. The TOC graph gives patients and physicians access to a decision-aid and read-out of the trade-off between treatment benefit and morbidity risks for individualised dose prescription customisation over a continuous range of dose levels.

Employing the therapeutic operating characteristic (TOC) graph for individualised dose prescription

PubMed Central

2013-01-01

Background In current practice, patients scheduled for radiotherapy are treated according to ‘rigid’ protocols with predefined dose prescriptions that do not consider risk-taking preferences of individuals. The therapeutic operating characteristic (TOC) graph is applied as a decision-aid to assess the trade-off between treatment benefit and morbidity to facilitate dose prescription customisation. Methods Historical dose-response data from prostate cancer patient cohorts treated with 3D-conformal radiotherapy is used to construct TOC graphs. Next, intensity-modulated (IMRT) plans are generated by optimisation based on dosimetric criteria and dose-response relationships. TOC graphs are constructed for dose-scaling of the optimised IMRT plan and individualised dose prescription. The area under the TOC curve (AUC) is estimated to measure the therapeutic power of these plans. Results On a continuous scale, the TOC graph directly visualises treatment benefit and morbidity risk of physicians’ or patients’ choices for dose (de-)escalation. The trade-off between these probabilities facilitates the selection of an individualised dose prescription. TOC graphs show broader therapeutic window and higher AUCs with increasing target dose heterogeneity. Conclusions The TOC graph gives patients and physicians access to a decision-aid and read-out of the trade-off between treatment benefit and morbidity risks for individualised dose prescription customisation over a continuous range of dose levels. PMID:23497640

Testing the robustness of optimal access vessel fleet selection for operation and maintenance of offshore wind farms

DOE PAGES

Sperstad, Iver Bakken; Stålhane, Magnus; Dinwoodie, Iain; ...

2017-09-23

Optimising the operation and maintenance (O&M) and logistics strategy of offshore wind farms implies the decision problem of selecting the vessel fleet for O&M. Different strategic decision support tools can be applied to this problem, but much uncertainty remains regarding both input data and modelling assumptions. Our paper aims to investigate and ultimately reduce this uncertainty by comparing four simulation tools, one mathematical optimisation tool and one analytic spreadsheet-based tool applied to select the O&M access vessel fleet that minimizes the total O&M cost of a reference wind farm. The comparison shows that the tools generally agree on the optimalmore » vessel fleet, but only partially agree on the relative ranking of the different vessel fleets in terms of total O&M cost. The robustness of the vessel fleet selection to various input data assumptions was tested, and the ranking was found to be particularly sensitive to the vessels' limiting significant wave height for turbine access. Also the parameter with the greatest discrepancy between the tools, implies that accurate quantification and modelling of this parameter is crucial. The ranking is moderately sensitive to turbine failure rates and vessel day rates but less sensitive to electricity price and vessel transit speed.« less

Testing the robustness of optimal access vessel fleet selection for operation and maintenance of offshore wind farms

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sperstad, Iver Bakken; Stålhane, Magnus; Dinwoodie, Iain

Optimising the operation and maintenance (O&M) and logistics strategy of offshore wind farms implies the decision problem of selecting the vessel fleet for O&M. Different strategic decision support tools can be applied to this problem, but much uncertainty remains regarding both input data and modelling assumptions. Our paper aims to investigate and ultimately reduce this uncertainty by comparing four simulation tools, one mathematical optimisation tool and one analytic spreadsheet-based tool applied to select the O&M access vessel fleet that minimizes the total O&M cost of a reference wind farm. The comparison shows that the tools generally agree on the optimalmore » vessel fleet, but only partially agree on the relative ranking of the different vessel fleets in terms of total O&M cost. The robustness of the vessel fleet selection to various input data assumptions was tested, and the ranking was found to be particularly sensitive to the vessels' limiting significant wave height for turbine access. Also the parameter with the greatest discrepancy between the tools, implies that accurate quantification and modelling of this parameter is crucial. The ranking is moderately sensitive to turbine failure rates and vessel day rates but less sensitive to electricity price and vessel transit speed.« less

CAMELOT: Computational-Analytical Multi-fidElity Low-thrust Optimisation Toolbox

NASA Astrophysics Data System (ADS)

Di Carlo, Marilena; Romero Martin, Juan Manuel; Vasile, Massimiliano

2018-03-01

Computational-Analytical Multi-fidElity Low-thrust Optimisation Toolbox (CAMELOT) is a toolbox for the fast preliminary design and optimisation of low-thrust trajectories. It solves highly complex combinatorial problems to plan multi-target missions characterised by long spirals including different perturbations. To do so, CAMELOT implements a novel multi-fidelity approach combining analytical surrogate modelling and accurate computational estimations of the mission cost. Decisions are then made using two optimisation engines included in the toolbox, a single-objective global optimiser, and a combinatorial optimisation algorithm. CAMELOT has been applied to a variety of case studies: from the design of interplanetary trajectories to the optimal de-orbiting of space debris and from the deployment of constellations to on-orbit servicing. In this paper, the main elements of CAMELOT are described and two examples, solved using the toolbox, are presented.

Boundary element based multiresolution shape optimisation in electrostatics

NASA Astrophysics Data System (ADS)

Bandara, Kosala; Cirak, Fehmi; Of, Günther; Steinbach, Olaf; Zapletal, Jan

2015-09-01

We consider the shape optimisation of high-voltage devices subject to electrostatic field equations by combining fast boundary elements with multiresolution subdivision surfaces. The geometry of the domain is described with subdivision surfaces and different resolutions of the same geometry are used for optimisation and analysis. The primal and adjoint problems are discretised with the boundary element method using a sufficiently fine control mesh. For shape optimisation the geometry is updated starting from the coarsest control mesh with increasingly finer control meshes. The multiresolution approach effectively prevents the appearance of non-physical geometry oscillations in the optimised shapes. Moreover, there is no need for mesh regeneration or smoothing during the optimisation due to the absence of a volume mesh. We present several numerical experiments and one industrial application to demonstrate the robustness and versatility of the developed approach.

Tail mean and related robust solution concepts

NASA Astrophysics Data System (ADS)

Ogryczak, Włodzimierz

2014-01-01

Robust optimisation might be viewed as a multicriteria optimisation problem where objectives correspond to the scenarios although their probabilities are unknown or imprecise. The simplest robust solution concept represents a conservative approach focused on the worst-case scenario results optimisation. A softer concept allows one to optimise the tail mean thus combining performances under multiple worst scenarios. We show that while considering robust models allowing the probabilities to vary only within given intervals, the tail mean represents the robust solution for only upper bounded probabilities. For any arbitrary intervals of probabilities the corresponding robust solution may be expressed by the optimisation of appropriately combined mean and tail mean criteria thus remaining easily implementable with auxiliary linear inequalities. Moreover, we use the tail mean concept to develope linear programming implementable robust solution concepts related to risk averse optimisation criteria.

A CONCEPTUAL FRAMEWORK FOR MANAGING RADIATION DOSE TO PATIENTS IN DIAGNOSTIC RADIOLOGY USING REFERENCE DOSE LEVELS.

PubMed

Almén, Anja; Båth, Magnus

2016-06-01

The overall aim of the present work was to develop a conceptual framework for managing radiation dose in diagnostic radiology with the intention to support optimisation. An optimisation process was first derived. The framework for managing radiation dose, based on the derived optimisation process, was then outlined. The outset of the optimisation process is four stages: providing equipment, establishing methodology, performing examinations and ensuring quality. The optimisation process comprises a series of activities and actions at these stages. The current system of diagnostic reference levels is an activity in the last stage, ensuring quality. The system becomes a reactive activity only to a certain extent engaging the core activity in the radiology department, performing examinations. Three reference dose levels-possible, expected and established-were assigned to the three stages in the optimisation process, excluding ensuring quality. A reasonably achievable dose range is also derived, indicating an acceptable deviation from the established dose level. A reasonable radiation dose for a single patient is within this range. The suggested framework for managing radiation dose should be regarded as one part of the optimisation process. The optimisation process constitutes a variety of complementary activities, where managing radiation dose is only one part. This emphasises the need to take a holistic approach integrating the optimisation process in different clinical activities. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

BluePyOpt: Leveraging Open Source Software and Cloud Infrastructure to Optimise Model Parameters in Neuroscience.

PubMed

Van Geit, Werner; Gevaert, Michael; Chindemi, Giuseppe; Rössert, Christian; Courcol, Jean-Denis; Muller, Eilif B; Schürmann, Felix; Segev, Idan; Markram, Henry

2016-01-01

At many scales in neuroscience, appropriate mathematical models take the form of complex dynamical systems. Parameterizing such models to conform to the multitude of available experimental constraints is a global non-linear optimisation problem with a complex fitness landscape, requiring numerical techniques to find suitable approximate solutions. Stochastic optimisation approaches, such as evolutionary algorithms, have been shown to be effective, but often the setting up of such optimisations and the choice of a specific search algorithm and its parameters is non-trivial, requiring domain-specific expertise. Here we describe BluePyOpt, a Python package targeted at the broad neuroscience community to simplify this task. BluePyOpt is an extensible framework for data-driven model parameter optimisation that wraps and standardizes several existing open-source tools. It simplifies the task of creating and sharing these optimisations, and the associated techniques and knowledge. This is achieved by abstracting the optimisation and evaluation tasks into various reusable and flexible discrete elements according to established best-practices. Further, BluePyOpt provides methods for setting up both small- and large-scale optimisations on a variety of platforms, ranging from laptops to Linux clusters and cloud-based compute infrastructures. The versatility of the BluePyOpt framework is demonstrated by working through three representative neuroscience specific use cases.

In Vitro Assays for Assessment of Androgenic and Estrogenic Activity of Defined Mixtures and Complex Environmental Samples

EPA Science Inventory

Point sources of endocrine active compounds to aquatic environments such as waste water treatment plants, pulp and paper mills, and animal feeding operations invariably contain complex mixtures of chemicals. The current study investigates the use of targeted in vitro assays des...

Improving agar electrospinnability with choline-based deep eutectic solvents

USDA-ARS?s Scientific Manuscript database

One percent agar (% wt) was dissolved in the deep eutectic solvent (DES), (2-hydroxyethyl) trimethylammonium chloride/urea at a 1:2 molar ratio, and successfully electrospun into nanofibers. An existing electrospinning set-up, operated at 50 deg C, was adapted for use with an ethanol bath to collect...

Development and optimisation of atorvastatin calcium loaded self-nanoemulsifying drug delivery system (SNEDDS) for enhancing oral bioavailability: in vitro and in vivo evaluation.

PubMed

Kassem, Abdulsalam M; Ibrahim, Hany M; Samy, Ahmed M

2017-05-01

The objective of this study was to develop and optimise self-nanoemulsifying drug delivery system (SNEDDS) of atorvastatin calcium (ATC) for improving dissolution rate and eventually oral bioavailability. Ternary phase diagrams were constructed on basis of solubility and emulsification studies. The composition of ATC-SNEDDS was optimised using the Box-Behnken optimisation design. Optimised ATC-SNEDDS was characterised for various physicochemical properties. Pharmacokinetic, pharmacodynamic and histological findings were performed in rats. Optimised ATC-SNEDDS resulted in droplets size of 5.66 nm, zeta potential of -19.52 mV, t 90 of 5.43 min and completely released ATC within 30 min irrespective of pH of the medium. Area under the curve of optimised ATC-SNEDDS in rats was 2.34-folds higher than ATC suspension. Pharmacodynamic studies revealed significant reduction in serum lipids of rats with fatty liver. Photomicrographs showed improvement in hepatocytes structure. In this study, we confirmed that ATC-SNEDDS would be a promising approach for improving oral bioavailability of ATC.

Current Aeromedical Issues in Rotary Wing Operations. (Problemes actuels de medecine aeronautique poses par les operations utilisant des voilures tournantes)

DTIC Science & Technology

1999-08-01

harness design faults. the backache by examining and improving the design of aircraft cockpits and aircraft seats. The introduction of armoured seats...upwards and Much effort has gone into improving the lumbar support forwards. The weight of anterior body armour increases and comfort of ejection seats...point compartments require restraint straps be draped over flight restraint, crash attenuating pilot and aircrew seats jackets, survival vests

Improving the Organisational Effectiveness of Coalition Operations (Amelioration de l’efficacite structurelle des operations en coalition)

DTIC Science & Technology

2012-11-01

peak capacity 2. Prosthesis or visual aids 3. Adaptation 4. Selection Motives 1. Assessment of people‘s motives to work 2. Recruitment of people to...after each rotation. In addition, feelings of isolation, frustration, and deprivation of a group identity [35] or difficulties in adopting new...people feel uncomfortable by feedback”. Finally, trust may be a sensitive issue in a multi-national environment, and can cause dilemma situations. In

Einleitung

NASA Astrophysics Data System (ADS)

Ha, Suk-Woo

Der Einsatz von Implantaten zielt auf die Unterstützung oder den Ersatz von Zelloder Gewebefunktionen im menschlichen Körper. Die Werkstoffauswahl für diese Implantate hängt dabei von der Art und der Funktion des zu ersetzenden Gewebes ab. Die Anforderungen an den Implantatwerkstoff bezüglich Eigenschaften und Struktur können je nach Implantationsort und Funktionalität ganz unterschiedlich sein. Implantate, die im Knochengewebe Funktionen der Lasteinleitung und -überleitung ausüben, sind hohen mechanischen Anforderungen (optimale Bauteilsteifigkeit, Dauerfestigkeit) unterworfen, während bei Blutgefässimplantaten die Werkstoffoberfläche, primär in ihrer chemischen Zusammensetzung derart gestaltet sein muss, dass eine minimale Thrombogenität resultiert. Für den Erfolg des Implantatwerkstoffes oder -bauteils sind folgende drei Faktoren relevant: (a) Biokompatibilität, (b) Gesundheitszustand des Patienten und (c) Verlauf der Operation und der nachfolgenden Therapie. Bei Vorliegen einer Erkrankung, wie z. B. die allergische Sensibilisierung gegenüber Metallionen (Nickelallergie) oder Osteoporose im Fall der Verankerung von Hüftprothesen, ist der Implantatwerkstoff höheren Anforderungen bezüglich der Biokompatibilität unterworfen als bei organisch gesunden Patienten.

Modeling and Simulation at NASA

NASA Technical Reports Server (NTRS)

Steele, Martin J.

2009-01-01

This slide presentation is composed of two topics. The first reviews the use of modeling and simulation (M&S) particularly as it relates to the Constellation program and discrete event simulation (DES). DES is defined as a process and system analysis, through time-based and resource constrained probabilistic simulation models, that provide insight into operation system performance. The DES shows that the cycles for a launch from manufacturing and assembly to launch and recovery is about 45 days and that approximately 4 launches per year are practicable. The second topic reviews a NASA Standard for Modeling and Simulation. The Columbia Accident Investigation Board made some recommendations related to models and simulations. Some of the ideas inherent in the new standard are the documentation of M&S activities, an assessment of the credibility, and reporting to decision makers, which should include the analysis of the results, a statement as to the uncertainty in the results,and the credibility of the results. There is also discussion about verification and validation (V&V) of models. There is also discussion about the different types of models and simulation.

Independent technical review and analysis of hydraulic modeling and hydrology under low-flow conditions of the Des Plaines River near Riverside, Illinois

USGS Publications Warehouse

Over, Thomas M.; Straub, Timothy D.; Hortness, Jon E.; Murphy, Elizabeth A.

2012-01-01

The U.S. Geological Survey (USGS) has operated a streamgage and published daily flows for the Des Plaines River at Riverside since Oct. 1, 1943. A HEC-RAS model has been developed to estimate the effect of the removal of Hofmann Dam near the gage on low-flow elevations in the reach approximately 3 miles upstream from the dam. The Village of Riverside, the Illinois Department of Natural Resources-Office of Water Resources (IDNR-OWR), and the U. S. Army Corps of Engineers-Chicago District (USACE-Chicago) are interested in verifying the performance of the HEC-RAS model for specific low-flow conditions, and obtaining an estimate of selected daily flow quantiles and other low-flow statistics for a selected period of record that best represents current hydrologic conditions. Because the USGS publishes streamflow records for the Des Plaines River system and provides unbiased analyses of flows and stream hydraulic characteristics, the USGS served as an Independent Technical Reviewer (ITR) for this study.

Evaluation and optimisation of phenomenological multi-step soot model for spray combustion under diesel engine-like operating conditions

NASA Astrophysics Data System (ADS)

Pang, Kar Mun; Jangi, Mehdi; Bai, Xue-Song; Schramm, Jesper

2015-05-01

In this work, a two-dimensional computational fluid dynamics study is reported of an n-heptane combustion event and the associated soot formation process in a constant volume combustion chamber. The key interest here is to evaluate the sensitivity of the chemical kinetics and submodels of a semi-empirical soot model in predicting the associated events. Numerical computation is performed using an open-source code and a chemistry coordinate mapping approach is used to expedite the calculation. A library consisting of various phenomenological multi-step soot models is constructed and integrated with the spray combustion solver. Prior to the soot modelling, combustion simulations are carried out. Numerical results show that the ignition delay times and lift-off lengths exhibit good agreement with the experimental measurements across a wide range of operating conditions, apart from those in the cases with ambient temperature lower than 850 K. The variation of the soot precursor production with respect to the change of ambient oxygen levels qualitatively agrees with that of the conceptual models when the skeletal n-heptane mechanism is integrated with a reduced pyrene chemistry. Subsequently, a comprehensive sensitivity analysis is carried out to appraise the existing soot formation and oxidation submodels. It is revealed that the soot formation is captured when the surface growth rate is calculated using a square root function of the soot specific surface area and when a pressure-dependent model constant is considered. An optimised soot model is then proposed based on the knowledge gained through this exercise. With the implementation of optimised model, the simulated soot onset and transport phenomena before reaching quasi-steady state agree reasonably well with the experimental observation. Also, variation of spatial soot distribution and soot mass produced at oxygen molar fractions ranging from 10.0 to 21.0% for both low and high density conditions are reproduced.

Laser polishing of 3D printed mesoscale components

NASA Astrophysics Data System (ADS)

Bhaduri, Debajyoti; Penchev, Pavel; Batal, Afif; Dimov, Stefan; Soo, Sein Leung; Sten, Stella; Harrysson, Urban; Zhang, Zhenxue; Dong, Hanshan

2017-05-01

Laser polishing of various engineered materials such as glass, silica, steel, nickel and titanium alloys, has attracted considerable interest in the last 20 years due to its superior flexibility, operating speed and capability for localised surface treatment compared to conventional mechanical based methods. The paper initially reports results from process optimisation experiments aimed at investigating the influence of laser fluence and pulse overlap parameters on resulting workpiece surface roughness following laser polishing of planar 3D printed stainless steel (SS316L) specimens. A maximum reduction in roughness of over 94% (from ∼3.8 to ∼0.2 μm Sa) was achieved at the optimised settings (fluence of 9 J/cm2 and overlap factors of 95% and 88-91% along beam scanning and step-over directions respectively). Subsequent analysis using both X-ray photoelectron spectroscopy (XPS) and glow discharge optical emission spectroscopy (GDOES) confirmed the presence of surface oxide layers (predominantly consisting of Fe and Cr phases) up to a depth of ∼0.5 μm when laser polishing was performed under normal atmospheric conditions. Conversely, formation of oxide layers was negligible when operating in an inert argon gas environment. The microhardness of the polished specimens was primarily influenced by the input thermal energy, with greater sub-surface hardness (up to ∼60%) recorded in the samples processed with higher energy density. Additionally, all of the polished surfaces were free of the scratch marks, pits, holes, lumps and irregularities that were prevalent on the as-received stainless steel samples. The optimised laser polishing technology was consequently implemented for serial finishing of structured 3D printed mesoscale SS316L components. This led to substantial reductions in areal Sa and St parameters by 75% (0.489-0.126 μm) and 90% (17.71-1.21 μm) respectively, without compromising the geometrical accuracy of the native 3D printed samples.

Improved power steering with double and triple ring waveguide systems: the impact of the operating frequency.

PubMed

Kok, H P; de Greef, M; Borsboom, P P; Bel, A; Crezee, J

2011-01-01

Regional hyperthermia systems with 3D power steering have been introduced to improve tumour temperatures. The 3D 70-MHz AMC-8 system has two rings of four waveguides. The aim of this study is to evaluate whether T(90) will improve by using a higher operating frequency and whether further improvement is possible by adding a third ring. Optimised specific absorption rate (SAR) distributions were evaluated for a centrally located target in tissue-equivalent phantoms, and temperature optimisation was performed for five cervical carcinoma patients with constraints to normal tissue temperatures. The resulting T(90) and the thermal iso-effect dose (i.e. the number of equivalent min at 43°C) were evaluated and compared to the 2D 70-MHz AMC-4 system with a single ring of four waveguides. FDTD simulations were performed at 2.5 × 2.5 × 5 mm(3) resolution. The applied frequencies were 70, 100, 120, 130, 140 and 150 MHz. Optimised SAR distributions in phantoms showed an optimal SAR distribution at 140 MHz. For the patient simulations, an optimal increase in T(90) was observed at 130 MHz. For a two-ring system at 70 MHz the gain in T(90) was about 0.5°C compared to the AMC-4 system, averaged over the five patients. At 130 MHz the average gain in T(90) was ~1.5°C and ~2°C for a two and three-ring system, respectively. This implies an improvement of the thermal iso-effect dose with a factor ~12 and ~30, respectively. Simulations showed that a 130-MHz two-ring waveguide system yields significantly higher tumour temperatures compared to 70-MHz single-ring and double-ring waveguide systems. Temperatures were further improved with a 130-MHz triple-ring system.

Entwicklung von umwelt- und naturschutzgerechten Verfahren der landwirtschaftlichen Landnutzung für das Biosphärenreservat Schorfheide-Chorin

NASA Astrophysics Data System (ADS)

Meyer-Aurich, Andreas

1999-11-01

Mit der vorliegenden Arbeit werden exemplarisch Chancen und Grenzen der Integration von Umwelt- und Naturschutz in Verfahren der ackerbaulichen Landnutzung aufgezeigt. Die Umsetzung von Zielen des Umwelt- und Naturschutzes in Verfahren der Landnutzung ist mit verschiedenen Schwierigkeiten verbunden. Diese liegen zum einen in der Konkretisierung der Ziele, um diese umsetzen zu können, zum anderen in vielfach unzulänglichem Wissen über den Zusammenhang zwischen unterschiedlichen Formen der Landnutzung und insbesondere den biotischen Naturschutzzielen. Zunächst wird die Problematik der Zielfestlegung und Konkretisierung erörtert. Das Umweltqualitätszielkonzept von Fürst et al. (1992) stellt einen Versuch dar, Ziele des Umwelt- und Naturschutzes zu konkretisieren. Dieses Konzept haben Heidt et al. (1997) auf einen Landschaftsausschnitt von ca. 6000 ha im Biosphärenreservat Schorfheide-Chorin im Nordosten Brandenburgs angewendet. Eine Auswahl der von Heidt et al. (1997) formulierten Umweltqualitätsziele bildet die Basis dieser Arbeit. Für die ausgewählten Umweltqualitätsziele wurden wesentliche Einflussfaktoren der Landnutzung identifiziert und ein Bewertungssystem entwickelt, mit dem die Auswirkungen von landwirtschaftlichen Anbauverfahren auf diese Umweltqualitätsziele abgebildet werden können. Die praktizierte Landnutzung von 20 Betrieben im Biosphärenreservat Schorfheide-Chorin wurde von 1994 bis 1997 hinsichtlich ihrer Auswirkungen auf die Umweltqualitätsziele analysiert. Die Analyse ergab ein sehr differenziertes Bild, das zum Teil Unterschiede in der Auswirkung auf die Umweltqualitätsziele für den Anbau einzelner Kulturen oder für bestimmte Betriebstypen zeigte. Es zeigte sich aber auch, dass es bei der Gestaltung des Anbaus einzelner Kulturarten große Unterschiede gab, die für Umweltqualitätsziele Bedeutung haben. Neben der Analyse der Landnutzung im Biosphärenreservat Schorfheide-Chorin wurde ein System entwickelt, mit dem die modellhafte Abbildung von Verfahren der Landnutzung möglich ist. Die Modellverfahren wurden in eine umfangreiche Datenbank eingebunden. Sie wurden mit Hilfe eines Fuzzy- Regelsystems hinsichtlich ihrer Auswirkungen auf die Umweltqualitätsziele bewertet. Die systematisch bewerteten Verfahren wurden in ein Betriebsmodell integriert, womit eine weitergehende Analyse der Zielbeziehungen und die Berechnung von Szenarien mit unterschiedlichen Rahmenbedingungen ermöglicht wurde. Die Analyse der Beziehung verschiedener Ziele zueinander (Zieldivergenz, Zielkonvergenz) zeigte, dass sich mit der Verfolgung vieler Umweltqualitätsziele auch positive Effekte für andere Umweltqualitätsziele ergaben. Teilweise konnte allerdings auch eine Zieldivergenz festgestellt werden, die auf mögliche Zielkonflikte hinweist. Bei der Analyse der Szenarienergebnisse zeigte sich, dass die vorgeschlagenen Veränderungen von Rahmenbedingungen vielfach eine Verschlechterung für verschiedene Umweltqualitätsziele mit sich bringen. Eine Ursache dafür liegt darin, dass bei der Definition der Szenarien die Bedeutung der Stilllegungen unterschätzt wurde. The objective of this research was to show the opportunities and limitations associated with integrating of environmental goals into agricultural land use management. For this purpose, the impact of agricultural land uses on six environmental quality goals was analysed for an approximately 16.000 ha study region within the biosphere reserve Schorfheide-Chorin in north-eastern Brandenburg (Germany). The environmental quality goals considered were protection of ground water, preservation of groundwater recharge, protection of the soil against wind and water erosion and preservation of animal species typical of the agricultural landscape, in particular partridge, amphibians and cranes. For each environmental quality goal, an evaluation framework is presented which enables an assessment of the impact of agricultural land uses on the environmental quality goals. The evaluation framework was applied to assess the impact of land uses of twenty farms in the study area from 1994 to 1997. It was demonstrated that the impact of agricultural land uses on the environmental quality of the region is very complex, and - although some crops did significantly impact certain aspects, one factor did not overwhelmingly contribute to the overall environmental quality. The evaluation framework was integrated further into a system of modelled cropping practices for optimisation calculations. For this purpose, a model framework was established based on a MS Access database. In the database, cropping practices for 17 crops are stored. Inputs and yields are adapted to the site-specific yield potential. In addition to the cropping practices, the model framework is comprised of an evaluation module and optimisation module. Hence, the impact of the cropping practices can be assessed for each site. This model framework provides the basis for optimisation calculations to forecast various land uses under different conditions. A step-wise integration of the environmental quality goals into the optimisation algorithm of a model farm allows for showing trade-offs between economic and ecological goals. The results of the trade-offs show that an improvement of ecological goal achievement is possible with little impact on the gross margin, as long as the improvement is less than 30% of the starting situation. If improvements greater than 30% are desired, very high losses of gross margin must be taken into consideration. Another result of the calculations shows that high achievements of environmental quality goals often correlate with the percentage of set-aside land within the total area.

Design Optimisation of a Magnetic Field Based Soft Tactile Sensor

PubMed Central

Raske, Nicholas; Kow, Junwai; Alazmani, Ali; Ghajari, Mazdak; Culmer, Peter; Hewson, Robert

2017-01-01

This paper investigates the design optimisation of a magnetic field based soft tactile sensor, comprised of a magnet and Hall effect module separated by an elastomer. The aim was to minimise sensitivity of the output force with respect to the input magnetic field; this was achieved by varying the geometry and material properties. Finite element simulations determined the magnetic field and structural behaviour under load. Genetic programming produced phenomenological expressions describing these responses. Optimisation studies constrained by a measurable force and stable loading conditions were conducted; these produced Pareto sets of designs from which the optimal sensor characteristics were selected. The optimisation demonstrated a compromise between sensitivity and the measurable force, a fabricated version of the optimised sensor validated the improvements made using this methodology. The approach presented can be applied in general for optimising soft tactile sensor designs over a range of applications and sensing modes. PMID:29099787

Electroproduction Exclusive des Mesons f0(980) et f2(1270) sur le Proton a JLab avec le Detecteur CLAS (in English; French)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Garillon, Brice

We present in this report our results for the exclusive electroproduction of f0(980) and f2(1270) off the proton. The data were taken during the e1-6 experiment (2001-2002) with the CLAS detector of Jff?erson Laboratory, using a 5.754 GeV beam and a liquid hydrogen target. We have measured for the first time the reduced differential cross sections for these two processes, in the kinematical region 1:5 < Q2 < 4:33 GeV2 and 0:15 < xB < 0:55. We propose an interpretation of our results according to a Regge-based model. An alternative analysis of the data in terms of partial waves amplitudesmore » as well as in terms of moments of the decay angular distributions has also been attempted. Finally, we have performed the calibration of the photomultipliers of the Central Neutron Detector (CND), to be installed in the CLAS12 detector. The CND has been optimised for the study of the n-DVCS process (Deeply Virtual Compton Scattering off the neutron).« less

Reducing ambulance response times using discrete event simulation.

PubMed

Wei Lam, Sean Shao; Zhang, Zhong Cheng; Oh, Hong Choon; Ng, Yih Ying; Wah, Win; Hock Ong, Marcus Eng

2014-01-01

The objectives of this study are to develop a discrete-event simulation (DES) model for the Singapore Emergency Medical Services (EMS), and to demonstrate the utility of this DES model for the evaluation of different policy alternatives to improve ambulance response times. A DES model was developed based on retrospective emergency call data over a continuous 6-month period in Singapore. The main outcome measure is the distribution of response times. The secondary outcome measure is ambulance utilization levels based on unit hour utilization (UHU) ratios. The DES model was used to evaluate different policy options in order to improve the response times, while maintaining reasonable fleet utilization. Three policy alternatives looking at the reallocation of ambulances, the addition of new ambulances, and alternative dispatch policies were evaluated. Modifications of dispatch policy combined with the reallocation of existing ambulances were able to achieve response time performance equivalent to that of adding 10 ambulances. The median (90th percentile) response time was 7.08 minutes (12.69 minutes). Overall, this combined strategy managed to narrow the gap between the ideal and existing response time distribution by 11-13%. Furthermore, the median UHU under this combined strategy was 0.324 with an interquartile range (IQR) of 0.047 versus a median utilization of 0.285 (IQR of 0.051) resulting from the introduction of additional ambulances. Response times were shown to be improved via a more effective reallocation of ambulances and dispatch policy. More importantly, the response time improvements were achieved without a reduction in the utilization levels and additional costs associated with the addition of ambulances. We demonstrated the effective use of DES as a versatile platform to model the dynamic system complexities of Singapore's national EMS systems for the evaluation of operational strategies to improve ambulance response times.

[Effects of acupuncture on bone metabolism and serum estradiol level in ovariectomy-induced osteoporosis rats].

PubMed

Ma, Jie; Yun-guang, Hu; Zhang, Da-hui

2008-08-01

To observe the effect of acupuncture (Acu) on bone metabolism and serum estradiol (E2) in ovariectomized (OVX) rats for studying its underlying mechanism in treating osteoporosis. Forty female SD rats of six months were randomized into sham operation (sham), model, Acu and Diethylstibestrol (DES) groups, with 10 cases in each. Postmenopausal osteoporosis model was established by removing ovaries under anesthesia. In Acu group, bilateral "Dazhu" (BL 11), "Shenshu" (BL 23) and "Pishu" (BL 20) were punctured and stimulated for 30 minutes, once daily for 60 days. Rats of DES group were drenched with saline+DES (22.5 microg/ml) 1 ml/100 g, once daily for 60 days. At the end of experiments, blood samples were collected from femoral artery for assaying serum alkaline phosphatase (ALP), tartrate-resistant acid phosphatase (TRAP) contents by using biochemistry, and serum bone gla protein (BGP) and E2 levels by immunoradioassay. Compared with sham group, uterus wet weight, serum E2 content in model group decreased significantly (P < 0.01) while body weight, serum ALP, BGP and TRAP levels in model group increased significantly (P < 0.01, 0.05). Compared with model group, uterus wet weight and serum Ez content in Acu and DES groups increased significantly (P < 0.01); while body weight, serum ALP, BGP and TRAP levels decreased considerably (P < 0.01). No significant differences were found between Acu and DES groups in serum E2, ALP, BGP and TRAP levels (P > 0.05). Acupuncture can suppress abnormal increase of body weight and decrease of serum E2 level, and significantly downregulate serum ALP, BGP and TRAP levels in OVX rats, which may contribute to its effect in relieving osteoporosis.

[Implementation of modern operating room management -- experiences made at an university hospital].

PubMed

Hensel, M; Wauer, H; Bloch, A; Volk, T; Kox, W J; Spies, C

2005-07-01

Caused by structural changes in health care the general need for cost control is evident for all hospitals. As operating room is one of the most cost-intensive sectors in a hospital, optimisation of workflow processes in this area is of particular interest for health care providers. While modern operating room management is established in several clinics yet, others are less prepared for economic challenges. Therefore, the operating room statute of the Charité university hospital useful for other hospitals to develop an own concept is presented. In addition, experiences made with implementation of new management structures are described and results obtained over the last 5 years are reported. Whereas the total number of operation procedures increased by 15 %, the operating room utilization increased more markedly in terms of time and cases. Summarizing the results, central operating room management has been proved to be an effective tool to increase the efficiency of workflow processes in the operating room.

Performance intensification of Prague wastewater treatment plant.

PubMed

Novák, L; Havrlíková, D

2004-01-01

Prague wastewater treatment plant was intensified during 1994--1997 by construction of new regeneration tank and four new secondary settling tanks. Nevertheless, more stringent effluent limits and operational problems gave rise to necessity for further intensification and optimisation of plant performance. This paper describes principal operational problems of the plant and shows solutions and achieved results that have lead to plant performance stabilisation. The following items are discussed: low nitrification capacity, nitrification bioaugmentation, activated sludge bulking, insufficient sludge disposal capacity, chemical precipitation of raw wastewater, simultaneous precipitation, sludge chlorination, installation of denitrification zones, sludge rising in secondary settling tanks due to denitrification, dosage of cationic polymeric organic flocculant to secondary settling tanks, thermophilic operation of digestors, surplus activated sludge pre-thickening, mathematical modelling.

Physics and operation oriented activities in preparation of the JT-60SA tokamak exploitation

NASA Astrophysics Data System (ADS)

Giruzzi, G.; Yoshida, M.; Artaud, J. F.; Asztalos, Ö.; Barbato, E.; Bettini, P.; Bierwage, A.; Boboc, A.; Bolzonella, T.; Clement-Lorenzo, S.; Coda, S.; Cruz, N.; Day, Chr.; De Tommasi, G.; Dibon, M.; Douai, D.; Dunai, D.; Enoeda, M.; Farina, D.; Figini, L.; Fukumoto, M.; Galazka, K.; Galdon, J.; Garcia, J.; Garcia-Muñoz, M.; Garzotti, L.; Gil, C.; Gleason-Gonzalez, C.; Goodman, T.; Granucci, G.; Hayashi, N.; Hoshino, K.; Ide, S.; Imazawa, R.; Innocente, P.; Isayama, A.; Itami, K.; Joffrin, E.; Kamada, Y.; Kamiya, K.; Kawano, Y.; Kawashima, H.; Kobayashi, T.; Kojima, A.; Kubo, H.; Lang, P.; Lauber, Ph.; de la Luna, E.; Maget, P.; Marchiori, G.; Mastrostefano, S.; Matsunaga, G.; Mattei, M.; McDonald, D. C.; Mele, A.; Miyata, Y.; Moriyama, S.; Moro, A.; Nakano, T.; Neu, R.; Nowak, S.; Orsitto, F. P.; Pautasso, G.; Pégourié, B.; Pigatto, L.; Pironti, A.; Platania, P.; Pokol, G. I.; Ricci, D.; Romanelli, M.; Saarelma, S.; Sakurai, S.; Sartori, F.; Sasao, H.; Scannapiego, M.; Shimizu, K.; Shinohara, K.; Shiraishi, J.; Soare, S.; Sozzi, C.; Stępniewski, W.; Suzuki, T.; Suzuki, Y.; Szepesi, T.; Takechi, M.; Tanaka, K.; Terranova, D.; Toma, M.; Urano, H.; Vega, J.; Villone, F.; Vitale, V.; Wakatsuki, T.; Wischmeier, M.; Zagórski, R.

2017-08-01

The JT-60SA tokamak, being built under the Broader Approach agreement jointly by Europe and Japan, is due to start operation in 2020 and is expected to give substantial contributions to both ITER and DEMO scenario optimisation. A broad set of preparation activities for an efficient start of the experiments on JT-60SA is being carried out, involving elaboration of the Research Plan, advanced modelling in various domains, feasibility and conception studies of diagnostics and other sub-systems in connection with the priorities of the scientific programme, development and validation of operation tools. The logic and coherence of this approach, as well as the most significant results of the main activities undertaken are presented and summarised.

Concept Designed and Developed for Distortion- Tolerant, High-Stability Engine Control

NASA Technical Reports Server (NTRS)

1995-01-01

Engine Control Future aircraft turbine engines, both commercial and military, must be able to successfully accommodate expected increased levels of steady-state and dynamic engine-face distortion. Advanced tactical aircraft are likely to use thrust vectoring to enhance their maneuverability. As a result, the engines will see more extreme aircraft angles-of-attack and sideslip levels than are currently encountered with present-day aircraft. Also, the mixed-compression inlets needed for the High Speed Civil Transport will likely encounter disturbances similar to those seen by tactical aircraft, in addition to planar pulse, inlet buzz, and high distortion levels at low flight speed and off-design operation. The current approach of incorporating a sufficient component design stall margin to tolerate these increased levels of distortion would significantly reduce performance. The objective of the High Stability Engine Control (HISTEC) program is to design, develop, and flight demonstrate an advanced, high-stability, integrated engine-control system that uses measurement-based, real-time estimates of distortion to enhance engine stability. The resulting distortion-tolerant control reduces the required design stall margin, with a corresponding increase in performance and decrease in fuel burn. The HISTEC concept has been designed and developed, and the software implementing the concept has successfully accommodated time-varying distortion. The NASA Lewis Research Center is currently overseeing the development and validation of the hardware and software necessary to flight test the HISTEC concept. HISTEC is a contracted effort with Pratt & Whitney of West Palm Beach, Florida. The HISTEC approach includes two major systems: A Distortion Estimation System (DES) and Stability Management Control (SMC). DES is an aircraft-mounted, high-speed processor that estimates the amount and type of distortion present and its effect on the engine. It uses high-response pressure measurements at the engine face to calculate indicators of the type and extent of distortion in real time. From these indicators, DES determines the effects of distortion on the propulsion systems and the corresponding engine match point necessary to accommodate it. DES output consists of fan and compressor pressure ratio trim commands that are passed to the SMC. In addition, DES uses maneuver information, consisting of angle-of-attack and sideslip from the flight control, to anticipate high inlet distortion conditions. The SMC, which is contained in the engine-mounted, Improved Digital Electronic Engine Control (IDEEC), includes advanced control laws to directly control the fan and compressor transient operating line (pressure ratio). These advanced control laws, with a multivariable design, have the potential for higher bandwidth and the resulting more precise control of engine match. The ability to measure and assess the distortion effects in real time coupled with a high-response controller improves engine stability at high levels of distortion. The software algorithms implementing DES have been designed, developed, and demonstrated, and integration testing of the DES and SMC software has been completed. The results show that the HISTEC system will be able to sense inlet distortion, determine the effect on engine stability, and accommodate distortion by maintaining an adequate margin for engine surge. The Pratt &Whitney Comprehensive Engine Diagnostic Unit was chosen as the DES processor. An instrumented inlet case for sensing distortion was designed and fabricated. HISTEC is scheduled for flight test on the ACTIVE F-15 aircraft at the NASA Dryden Flight Research Center in Edwards, California, in late 1996.

BluePyOpt: Leveraging Open Source Software and Cloud Infrastructure to Optimise Model Parameters in Neuroscience

PubMed Central

Van Geit, Werner; Gevaert, Michael; Chindemi, Giuseppe; Rössert, Christian; Courcol, Jean-Denis; Muller, Eilif B.; Schürmann, Felix; Segev, Idan; Markram, Henry

2016-01-01

At many scales in neuroscience, appropriate mathematical models take the form of complex dynamical systems. Parameterizing such models to conform to the multitude of available experimental constraints is a global non-linear optimisation problem with a complex fitness landscape, requiring numerical techniques to find suitable approximate solutions. Stochastic optimisation approaches, such as evolutionary algorithms, have been shown to be effective, but often the setting up of such optimisations and the choice of a specific search algorithm and its parameters is non-trivial, requiring domain-specific expertise. Here we describe BluePyOpt, a Python package targeted at the broad neuroscience community to simplify this task. BluePyOpt is an extensible framework for data-driven model parameter optimisation that wraps and standardizes several existing open-source tools. It simplifies the task of creating and sharing these optimisations, and the associated techniques and knowledge. This is achieved by abstracting the optimisation and evaluation tasks into various reusable and flexible discrete elements according to established best-practices. Further, BluePyOpt provides methods for setting up both small- and large-scale optimisations on a variety of platforms, ranging from laptops to Linux clusters and cloud-based compute infrastructures. The versatility of the BluePyOpt framework is demonstrated by working through three representative neuroscience specific use cases. PMID:27375471

Optimising Ambient Setting Bayer Derived Fly Ash Geopolymers

PubMed Central

Jamieson, Evan; Kealley, Catherine S.; van Riessen, Arie; Hart, Robert D.

2016-01-01

The Bayer process utilises high concentrations of caustic and elevated temperature to liberate alumina from bauxite, for the production of aluminium and other chemicals. Within Australia, this process results in 40 million tonnes of mineral residues (Red mud) each year. Over the same period, the energy production sector will produce 14 million tonnes of coal combustion products (Fly ash). Both industrial residues require impoundment storage, yet combining some of these components can produce geopolymers, an alternative to cement. Geopolymers derived from Bayer liquor and fly ash have been made successfully with a compressive strength in excess of 40 MPa after oven curing. However, any product from these industries would require large volume applications with robust operational conditions to maximise utilisation. To facilitate potential unconfined large-scale production, Bayer derived fly ash geopolymers have been optimised to achieve ambient curing. Fly ash from two different power stations have been successfully trialled showing the versatility of the Bayer liquor-ash combination for making geopolymers. PMID:28773513

Optimising Ambient Setting Bayer Derived Fly Ash Geopolymers.

PubMed

Jamieson, Evan; Kealley, Catherine S; van Riessen, Arie; Hart, Robert D

2016-05-19

The Bayer process utilises high concentrations of caustic and elevated temperature to liberate alumina from bauxite, for the production of aluminium and other chemicals. Within Australia, this process results in 40 million tonnes of mineral residues (Red mud) each year. Over the same period, the energy production sector will produce 14 million tonnes of coal combustion products (Fly ash). Both industrial residues require impoundment storage, yet combining some of these components can produce geopolymers, an alternative to cement. Geopolymers derived from Bayer liquor and fly ash have been made successfully with a compressive strength in excess of 40 MPa after oven curing. However, any product from these industries would require large volume applications with robust operational conditions to maximise utilisation. To facilitate potential unconfined large-scale production, Bayer derived fly ash geopolymers have been optimised to achieve ambient curing. Fly ash from two different power stations have been successfully trialled showing the versatility of the Bayer liquor-ash combination for making geopolymers.

Optimisation of the usage of LHC and local computing resources in a multidisciplinary physics department hosting a WLCG Tier-2 centre

NASA Astrophysics Data System (ADS)

Barberis, Stefano; Carminati, Leonardo; Leveraro, Franco; Mazza, Simone Michele; Perini, Laura; Perlz, Francesco; Rebatto, David; Tura, Ruggero; Vaccarossa, Luca; Villaplana, Miguel

2015-12-01

We present the approach of the University of Milan Physics Department and the local unit of INFN to allow and encourage the sharing among different research areas of computing, storage and networking resources (the largest ones being those composing the Milan WLCG Tier-2 centre and tailored to the needs of the ATLAS experiment). Computing resources are organised as independent HTCondor pools, with a global master in charge of monitoring them and optimising their usage. The configuration has to provide satisfactory throughput for both serial and parallel (multicore, MPI) jobs. A combination of local, remote and cloud storage options are available. The experience of users from different research areas operating on this shared infrastructure is discussed. The promising direction of improving scientific computing throughput by federating access to distributed computing and storage also seems to fit very well with the objectives listed in the European Horizon 2020 framework for research and development.

High repetition ration solid state switched CO2 TEA laser employed in industrial ultrasonic testing of aircraft parts

NASA Astrophysics Data System (ADS)

von Bergmann, Hubertus; Morkel, Francois; Stehmann, Timo

2015-02-01

Laser Ultrasonic Testing (UT) is an important technique for the non-destructive inspection of composite parts in the aerospace industry. In laser UT a high power, short pulse probe laser is scanned across the material surface, generating ultrasound waves which can be detected by a second low power laser system and are used to draw a defect map of the part. We report on the design and testing of a transversely excited atmospheric pressure (TEA) CO2 laser system specifically optimised for laser UT. The laser is excited by a novel solid-state switched pulsing system and utilises either spark or corona preionisation. It provides short output pulses of less than 100 ns at repetition rates of up to 1 kHz, optimised for efficient ultrasonic wave generation. The system has been designed for highly reliable operation under industrial conditions and a long term test with total pulse counts in excess of 5 billion laser pulses is reported.

Optimal sensor placement for modal testing on wind turbines

NASA Astrophysics Data System (ADS)

Schulze, Andreas; Zierath, János; Rosenow, Sven-Erik; Bockhahn, Reik; Rachholz, Roman; Woernle, Christoph

2016-09-01

The mechanical design of wind turbines requires a profound understanding of the dynamic behaviour. Even though highly detailed simulation models are already in use to support wind turbine design, modal testing on a real prototype is irreplaceable to identify site-specific conditions such as the stiffness of the tower foundation. Correct identification of the mode shapes of a complex mechanical structure much depends on the placement of the sensors. For operational modal analysis of a 3 MW wind turbine with a 120 m rotor on a 100 m tower developed by W2E Wind to Energy, algorithms for optimal placement of acceleration sensors are applied. The mode shapes used for the optimisation are calculated by means of a detailed flexible multibody model of the wind turbine. Among the three algorithms in this study, the genetic algorithm with weighted off-diagonal criterion yields the sensor configuration with the highest quality. The ongoing measurements on the prototype will be the basis for the development of optimised wind turbine designs.

Power generation based on biomass by combined fermentation and gasification--a new concept derived from experiments and modelling.

PubMed

Methling, Torsten; Armbrust, Nina; Haitz, Thilo; Speidel, Michael; Poboss, Norman; Braun-Unkhoff, Marina; Dieter, Heiko; Kempter-Regel, Brigitte; Kraaij, Gerard; Schliessmann, Ursula; Sterr, Yasemin; Wörner, Antje; Hirth, Thomas; Riedel, Uwe; Scheffknecht, Günter

2014-10-01

A new concept is proposed for combined fermentation (two-stage high-load fermenter) and gasification (two-stage fluidised bed gasifier with CO2 separation) of sewage sludge and wood, and the subsequent utilisation of the biogenic gases in a hybrid power plant, consisting of a solid oxide fuel cell and a gas turbine. The development and optimisation of the important processes of the new concept (fermentation, gasification, utilisation) are reported in detail. For the gas production, process parameters were experimentally and numerically investigated to achieve high conversion rates of biomass. For the product gas utilisation, important combustion properties (laminar flame speed, ignition delay time) were analysed numerically to evaluate machinery operation (reliability, emissions). Furthermore, the coupling of the processes was numerically analysed and optimised by means of integration of heat and mass flows. The high, simulated electrical efficiency of 42% including the conversion of raw biomass is promising for future power generation by biomass. Copyright © 2014 Elsevier Ltd. All rights reserved.

On the performance of energy detection-based CR with SC diversity over IG channel

NASA Astrophysics Data System (ADS)

Verma, Pappu Kumar; Soni, Sanjay Kumar; Jain, Priyanka

2017-12-01

Cognitive radio (CR) is a viable 5G technology to address the scarcity of the spectrum. Energy detection-based sensing is known to be the simplest method as far as hardware complexity is concerned. In this paper, the performance of spectrum sensing-based energy detection technique in CR networks over inverse Gaussian channel for selection combining diversity technique is analysed. More specifically, accurate analytical expressions for the average detection probability under different detection scenarios such as single channel (no diversity) and with diversity reception are derived and evaluated. Further, the detection threshold parameter is optimised by minimising the probability of error over several diversity branches. The results clearly show the significant improvement in the probability of detection when optimised threshold parameter is applied. The impact of shadowing parameters on the performance of energy detector is studied in terms of complimentary receiver operating characteristic curve. To verify the correctness of our analysis, the derived analytical expressions are corroborated via exact result and Monte Carlo simulations.

Image charge multi-role and function detectors

NASA Astrophysics Data System (ADS)

Milnes, James; Lapington, Jon S.; Jagutzki, Ottmar; Howorth, Jon

2009-06-01

The image charge technique used with microchannel plate imaging tubes provides several operational and practical benefits by serving to isolate the electronic image readout from the detector. The simple dielectric interface between detector and readout provides vacuum isolation and no vacuum electrical feed-throughs are required. Since the readout is mechanically separate from the detector, an image tube of generic design can be simply optimised for various applications by attaching it to different readout devices and electronics. We present imaging performance results using a single image tube with a variety of readout devices suited to differing applications: (a) A four electrode charge division tetra wedge anode, optimised for best spatial resolution in photon counting mode. (b) A cross delay line anode, enabling higher count rate, and the possibility of discriminating near co-incident events, and an event timing resolution of better than 1 ns. (c) A multi-anode readout connected, either to a multi-channel oscilloscope for analogue measurements of fast optical pulses, or alternately, to a multi-channel time correlated single photon counting (TCSPC) card.

A stable solution-processed polymer semiconductor with record high-mobility for printed transistors

PubMed Central

Li, Jun; Zhao, Yan; Tan, Huei Shuan; Guo, Yunlong; Di, Chong-An; Yu, Gui; Liu, Yunqi; Lin, Ming; Lim, Suo Hon; Zhou, Yuhua; Su, Haibin; Ong, Beng S.

2012-01-01

Microelectronic circuits/arrays produced via high-speed printing instead of traditional photolithographic processes offer an appealing approach to creating the long-sought after, low-cost, large-area flexible electronics. Foremost among critical enablers to propel this paradigm shift in manufacturing is a stable, solution-processable, high-performance semiconductor for printing functionally capable thin-film transistors — fundamental building blocks of microelectronics. We report herein the processing and optimisation of solution-processable polymer semiconductors for thin-film transistors, demonstrating very high field-effect mobility, high on/off ratio, and excellent shelf-life and operating stabilities under ambient conditions. Exceptionally high-gain inverters and functional ring oscillator devices on flexible substrates have been demonstrated. This optimised polymer semiconductor represents a significant progress in semiconductor development, dispelling prevalent skepticism surrounding practical usability of organic semiconductors for high-performance microelectronic devices, opening up application opportunities hitherto functionally or economically inaccessible with silicon technologies, and providing an excellent structural framework for fundamental studies of charge transport in organic systems. PMID:23082244

Retrieval medicine: a review and guide for UK practitioners. Part 2: safety in patient retrieval systems

PubMed Central

Hearns, S; Shirley, P J

2006-01-01

Retrieval and transfer of critically ill and injured patients is a high risk activity. Risk can be minimised with robust safety and clinical governance systems in place. This article describes the various governance systems that can be employed to optimise safety and efficiency in retrieval services. These include operating procedure development, equipment management, communications procedures, crew resource management, significant event analysis, audit and training. PMID:17130608

Mission Command: Elasticity, Equilibrium, Culture, and Intent

DTIC Science & Technology

2006-11-01

évidence « l’élasticité » de l’organisation. Comparativement à l’organisation décentralisée, une force centralisée possède une réserve beaucoup plus...avoir une faible intention implicite potentiel comparativement à une autre. La mesure dans laquelle la culture de commandement de l’organisation...is that the organisation is optimised, by design , to operate at this point on the continuum. Centralised Decentralised Shared Intent Implicit

Optimisation of air cooled, open-cathode fuel cells: Current of lowest resistance and electro-thermal performance mapping

NASA Astrophysics Data System (ADS)

Meyer, Quentin; Ronaszegi, Krisztian; Pei-June, Gan; Curnick, Oliver; Ashton, Sean; Reisch, Tobias; Adcock, Paul; Shearing, Paul R.; Brett, Daniel J. L.

2015-09-01

Selecting the ideal operating point for a fuel cell depends on the application and consequent trade-off between efficiency, power density and various operating considerations. A systematic methodology for determining the optimal operating point for fuel cells is lacking; there is also the need for a single-value metric to describe and compare fuel cell performance. This work shows how the 'current of lowest resistance' can be accurately measured using electrochemical impedance spectroscopy and used as a useful metric of fuel cell performance. This, along with other measures, is then used to generate an 'electro-thermal performance map' of fuel cell operation. A commercial air-cooled open-cathode fuel cell is used to demonstrate how the approach can be used; in this case leading to the identification of the optimum operating temperature of ∼45 °C.

Economic impact of optimising antiretroviral treatment in human immunodeficiency virus-infected adults with suppressed viral load in Spain, by implementing the grade A-1 evidence recommendations of the 2015 GESIDA/National AIDS Plan.

PubMed

Ribera, Esteban; Martínez-Sesmero, José Manuel; Sánchez-Rubio, Javier; Rubio, Rafael; Pasquau, Juan; Poveda, José Luis; Pérez-Mitru, Alejandro; Roldán, Celia; Hernández-Novoa, Beatriz

2018-03-01

The objective of this study is to estimate the economic impact associated with the optimisation of triple antiretroviral treatment (ART) in patients with undetectable viral load according to the recommendations from the GeSIDA/PNS (2015) Consensus and their applicability in the Spanish clinical practice. A pharmacoeconomic model was developed based on data from a National Hospital Prescription Survey on ART (2014) and the A-I evidence recommendations for the optimisation of ART from the GeSIDA/PNS (2015) consensus. The optimisation model took into account the willingness to optimise a particular regimen and other assumptions, and the results were validated by an expert panel in HIV infection (Infectious Disease Specialists and Hospital Pharmacists). The analysis was conducted from the NHS perspective, considering the annual wholesale price and accounting for deductions stated in the RD-Law 8/2010 and the VAT. The expert panel selected six optimisation strategies, and estimated that 10,863 (13.4%) of the 80,859 patients in Spain currently on triple ART, would be candidates to optimise their ART, leading to savings of €15.9M/year (2.4% of total triple ART drug cost). The most feasible strategies (>40% of patients candidates for optimisation, n=4,556) would be optimisations to ATV/r+3TC therapy. These would produce savings between €653 and €4,797 per patient per year depending on baseline triple ART. Implementation of the main optimisation strategies recommended in the GeSIDA/PNS (2015) Consensus into Spanish clinical practice would lead to considerable savings, especially those based in dual therapy with ATV/r+3TC, thus contributing to the control of pharmaceutical expenditure and NHS sustainability. Copyright © 2016 Elsevier España, S.L.U. and Sociedad Española de Enfermedades Infecciosas y Microbiología Clínica. All rights reserved.

Optimisation of the hybrid renewable energy system by HOMER, PSO and CPSO for the study area

NASA Astrophysics Data System (ADS)

Khare, Vikas; Nema, Savita; Baredar, Prashant

2017-04-01

This study is based on simulation and optimisation of the renewable energy system of the police control room at Sagar in central India. To analyse this hybrid system, the meteorological data of solar insolation and hourly wind speeds of Sagar in central India (longitude 78°45‧ and latitude 23°50‧) have been considered. The pattern of load consumption is studied and suitably modelled for optimisation of the hybrid energy system using HOMER software. The results are compared with those of the particle swarm optimisation and the chaotic particle swarm optimisation algorithms. The use of these two algorithms to optimise the hybrid system leads to a higher quality result with faster convergence. Based on the optimisation result, it has been found that replacing conventional energy sources by the solar-wind hybrid renewable energy system will be a feasible solution for the distribution of electric power as a stand-alone application at the police control room. This system is more environmentally friendly than the conventional diesel generator. The fuel cost reduction is approximately 70-80% more than that of the conventional diesel generator.

Optimisation of flame parameters for simultaneous multi-element atomic absorption spectrometric determination of trace elements in rocks

USGS Publications Warehouse

Kane, J.S.

1988-01-01

A study is described that identifies the optimum operating conditions for the accurate determination of Co, Cu, Mn, Ni, Pb, Zn, Ag, Bi and Cd using simultaneous multi-element atomic absorption spectrometry. Accuracy was measured in terms of the percentage recoveries of the analytes based on certified values in nine standard reference materials. In addition to identifying optimum operating conditions for accurate analysis, conditions resulting in serious matrix interferences and the magnitude of the interferences were determined. The listed elements can be measured with acceptable accuracy in a lean to stoicheiometric flame at measurement heights ???5-10 mm above the burner.

Collaborative project optimises LED lighting.

PubMed

Baillie, Jonathan

2014-05-01

Early 2013 saw Brandon Medical, which designs and manufactures equipment ranging from operating theatre lighting to medical AV and control systems, celebrate '20 years of innovation and growth', with a move to a new pounds 2 million, 50,000 ft2 headquarters in Morley near Leeds, twice the size of its former premises. A milestone year then for the entrepreneurial Yorkshire company, but, as HEJ editor, Jonathan Baillie, discovered, when he met with joint MD, Graeme Hall, 2014 should prove an equally exciting one for the medical technology specialist, with the launch of several new 'field-leading' medical lighting products designed for use in operating theatres and minor examination settings.

Social Sciences Support to Military Personnel Engaged in Counter-Insurgency and Counter-Terrorism Operations (Soutien en sciences sociales apporte au personnel militaire engage dans des operations de contre-insurrection et de contre-terrorisme)

DTIC Science & Technology

2011-11-01

much more negative about Muslims, became jumpy, felt the world is less safe, found it hard to sleep, found it hard to detach, becoming emotionally ...the impact of military posture and ways to minimize the negative impact of military operations, disengagement and deradicalization efforts, as well as...combat is difficult. After armed conflict, 70% of participants have a negative outlook toward military service and choose to resign. A key factor in this

Optimisation of nano-silica modified self-compacting high-Volume fly ash mortar

NASA Astrophysics Data System (ADS)

Achara, Bitrus Emmanuel; Mohammed, Bashar S.; Fadhil Nuruddin, Muhd

2017-05-01

Evaluation of the effects of nano-silica amount and superplasticizer (SP) dosage on the compressive strength, porosity and slump flow on high-volume fly ash self-consolidating mortar was investigated. Multiobjective optimisation technique using Design-Expert software was applied to obtain solution based on desirability function that simultaneously optimises the variables and the responses. A desirability function of 0.811 gives the optimised solution. The experimental and predicted results showed minimal errors in all the measured responses.

Anaesthesia for children with bronchial asthma and respiratory infections.

PubMed

Rajesh, M C

2015-09-01

Asthma represents one of the most common chronic diseases in children with an increasing incidence reported worldwide. The key to successful anaesthetic outcome involves thorough pre-operative assessment and optimisation of the child's pulmonary status. Judicious application of proper anti-inflammatory and bronchodilatory regimes should be instituted as part of pre-operative preparation. Bronchospasm triggering agents should be carefully probed and meticulously avoided. A calm and properly sedated child at the time of induction is ideal, so also is extubation in a deep plane with an unobstructed airway. Wherever possible, regional anaesthesia should be employed. This will avoid airway manipulations, with additional benefit of excellent peri-operative analgesia. Agents with a potential for histamine release and techniques that can increase airway resistance should be diligently avoided. Emphasis must be given to proper post-operative care including respiratory monitoring, analgesia and breathing exercises.

Advanced treatment planning using direct 4D optimisation for pencil-beam scanned particle therapy

NASA Astrophysics Data System (ADS)

Bernatowicz, Kinga; Zhang, Ye; Perrin, Rosalind; Weber, Damien C.; Lomax, Antony J.

2017-08-01

We report on development of a new four-dimensional (4D) optimisation approach for scanned proton beams, which incorporates both irregular motion patterns and the delivery dynamics of the treatment machine into the plan optimiser. Furthermore, we assess the effectiveness of this technique to reduce dose to critical structures in proximity to moving targets, while maintaining effective target dose homogeneity and coverage. The proposed approach has been tested using both a simulated phantom and a clinical liver cancer case, and allows for realistic 4D calculations and optimisation using irregular breathing patterns extracted from e.g. 4DCT-MRI (4D computed tomography-magnetic resonance imaging). 4D dose distributions resulting from our 4D optimisation can achieve almost the same quality as static plans, independent of the studied geometry/anatomy or selected motion (regular and irregular). Additionally, current implementation of the 4D optimisation approach requires less than 3 min to find the solution for a single field planned on 4DCT of a liver cancer patient. Although 4D optimisation allows for realistic calculations using irregular breathing patterns, it is very sensitive to variations from the planned motion. Based on a sensitivity analysis, target dose homogeneity comparable to static plans (D5-D95  <5%) has been found only for differences in amplitude of up to 1 mm, for changes in respiratory phase  <200 ms and for changes in the breathing period of  <20 ms in comparison to the motions used during optimisation. As such, methods to robustly deliver 4D optimised plans employing 4D intensity-modulated delivery are discussed.

Motion Sickness: Significance in Aerospace Operations and Prophylaxis (Le Mal des Transports: Son Importance pour les Operations Aerospatiales et Prophylaxies)

DTIC Science & Technology

1991-09-01

description of motion sickness will be based on the assumption that only one peculiar thing happens: a poison response is provoked by motion. Common sense...available for study , because it can be produced for study without the complicating presence of a poison. It is produced by a motion stimulus that...34nausea occurred only during gastric relaxation and hypomotility" (26). The electrical activity of the gut has also been studied during motion

Nonstandard Dirac equations for nonstandard spinors

NASA Astrophysics Data System (ADS)

Nikitin, A. G.

2014-11-01

Generalized Dirac equation with operator mass term is presented. Its solutions are nonstandard spinors (NSS) which, like eigenspinoren des Ladungskonjugationsoperators (ELKO), are eigenvectors of the charge conjugation and dual-helicity operators. It is demonstrated that in spite of their noncovariant nature the NSS can serve as a carrier space of a representation of Poincaré group. However, the corresponding boost generators are not manifestly covariant and generate nonlocal momentum dependent transformations, which are presented explicitly. These results can present a new look on group-theoretical grounds of ELKO theories.

Operational Cost Analysis of Dental Emergencies for Deployed U.S. Army Personnel During Operation Iraqi Freedom

DTIC Science & Technology

2013-04-01

Necrotizing Ulcerative DOI40/D4341 Gingivitis Oral Infection or Abscess DOI40/D7510 of Undetermined Origin Other Orofacial Pain DO 140/D91 10...10.7205/MILMED-D-12-00431 MILITARY MEDICINE, Vol. 178, April 2013 METHODS Dental Emergencies DE care is designed to relieve oral pain , eliminate...by the authors into three subsets: severe, moderately severe, and pain /loss of function (see Table I). The severe category was defined as DEs

Human Systems Integration for Network Centric Warfare (Integration des systemes humains dans les operations reseaux centrees)

DTIC Science & Technology

2010-02-01

Combat System (MCS) or Medical Vehicle Treatment (MV- T ), A for unmanned aerial vehicles such as Class II, and G for unmanned ground vehicles the...effective co-ordination with other NATO bodies involved in R& T activities. RTO reports both to the Military Committee of NATO and to the Conference of...research is one of the more promising areas of co-operation. The total spectrum of R& T activities is covered by the following 7 bodies: • AVT Applied

Aile adaptable : Design du systeme d'actionnement de l'aileron rigide, caracterisation des capteurs de pression et instrumentation pour des tests statiques =

NASA Astrophysics Data System (ADS)

Vincent, Jean-Baptiste

This Master's thesis is part of a multidisciplinary optimisation project initiated by the Consortium for Research and Innovation in Aerospace in Quebec (CRIAQ) ; this project is about designing and manufacturing a morphing wing demonstrator. The morphing design adopted in this project is based on airfoil thickness variation applied to the upper skin. This morphing generates a change in the laminar to turbulent boundary layer transition position on top of the wing. The position of this transition area leads to significant changes in the aerodynamic performance of the wing. The study presented here focuses on the design of the conventional aileron actuation system and on the characterization of the high sensitivity differential pressure sensors installed on the upper skin in order to determine the laminar to turbulent transition position. Furthermore, the study focuses on the data acquisition system for the morphing wing structural test validation. The aileron actuation system is based on a linear actuator actuated by a brushless motor. The component choice is presented as well as the command method. A static validation as well as wind tunnel validation is presented. The pressure sensor characterization is performed by installing three of those high sensitivity differential pressure sensors in a bi-dimensional known airfoil. This study goes through the process of determining the sensor position in order to observe the transition area by using a computational fluid dynamics (CFD) statistic approach. The validation of the laminar to turbulent transition position is carried out with a series of wind tunnel tests. A structural test has been executed in order to validate the wing structure. This Master's thesis shows the data acquisition system for the microstrain measurement installed inside the morphing wing. A hardware and software architecture description is developed and presented as well as the practical results.

State-discharge relations at dams on the Illinois and Des Plaines rivers in Illinois

USGS Publications Warehouse

Mades, Dean M.

1981-01-01

Stage-discharge relations were developed for the Brandon Road Dam on the Des Plainse River and the Dresden Island, Marseilles, Starved Rock, Peoria, and La Grange Dams on the Illinois River. At Brandon Road Dam, streamflow is regulated by the operation of tainter gates and headgates. Tainter gates are operated to regulate streamflow at the Dresden Island, Marseilles, and Starved Rock Dams. Peoria Dam and La Grange Dam comprise timber Chanoine wickets which are lowered to a horizontal position on the streambed when used for streamflow regulation. Both dams have concrete abutments housing butterfly valves that are also used for regulation. A total of 50 discharge measurements ranging from 49.0 to 2,450 cubic meter per second were used to determine discharge coefficients in equations expressing discharge as a function of headwater depth, tailwater depth, and gate opening. A stage-discharge relation for Chanoine wicket dams developed from a U.S. Army Corps of Engineers hydraulic model study in 1937 and 1938 was verified with discharge measurements made downstream from the Peoria and La Grange Dams. (USGS)

A practical method to standardise and optimise the Philips DoseRight 2.0 CT automatic exposure control system.

PubMed

Wood, T J; Moore, C S; Stephens, A; Saunderson, J R; Beavis, A W

2015-09-01

Given the increasing use of computed tomography (CT) in the UK over the last 30 years, it is essential to ensure that all imaging protocols are optimised to keep radiation doses as low as reasonably practicable, consistent with the intended clinical task. However, the complexity of modern CT equipment can make this task difficult to achieve in practice. Recent results of local patient dose audits have shown discrepancies between two Philips CT scanners that use the DoseRight 2.0 automatic exposure control (AEC) system in the 'automatic' mode of operation. The use of this system can result in drifting dose and image quality performance over time as it is designed to evolve based on operator technique. The purpose of this study was to develop a practical technique for configuring examination protocols on four CT scanners that use the DoseRight 2.0 AEC system in the 'manual' mode of operation. This method used a uniform phantom to generate reference images which form the basis for how the AEC system calculates exposure factors for any given patient. The results of this study have demonstrated excellent agreement in the configuration of the CT scanners in terms of average patient dose and image quality when using this technique. This work highlights the importance of CT protocol harmonisation in a modern Radiology department to ensure both consistent image quality and radiation dose. Following this study, the average radiation dose for a range of CT examinations has been reduced without any negative impact on clinical image quality.

Optimisation of insect cell growth in deep-well blocks: development of a high-throughput insect cell expression screen.

PubMed

Bahia, Daljit; Cheung, Robert; Buchs, Mirjam; Geisse, Sabine; Hunt, Ian

2005-01-01

This report describes a method to culture insects cells in 24 deep-well blocks for the routine small-scale optimisation of baculovirus-mediated protein expression experiments. Miniaturisation of this process provides the necessary reduction in terms of resource allocation, reagents, and labour to allow extensive and rapid optimisation of expression conditions, with the concomitant reduction in lead-time before commencement of large-scale bioreactor experiments. This therefore greatly simplifies the optimisation process and allows the use of liquid handling robotics in much of the initial optimisation stages of the process, thereby greatly increasing the throughput of the laboratory. We present several examples of the use of deep-well block expression studies in the optimisation of therapeutically relevant protein targets. We also discuss how the enhanced throughput offered by this approach can be adapted to robotic handling systems and the implications this has on the capacity to conduct multi-parallel protein expression studies.

Mutual information-based LPI optimisation for radar network

NASA Astrophysics Data System (ADS)

Shi, Chenguang; Zhou, Jianjiang; Wang, Fei; Chen, Jun

2015-07-01

Radar network can offer significant performance improvement for target detection and information extraction employing spatial diversity. For a fixed number of radars, the achievable mutual information (MI) for estimating the target parameters may extend beyond a predefined threshold with full power transmission. In this paper, an effective low probability of intercept (LPI) optimisation algorithm is presented to improve LPI performance for radar network. Based on radar network system model, we first provide Schleher intercept factor for radar network as an optimisation metric for LPI performance. Then, a novel LPI optimisation algorithm is presented, where for a predefined MI threshold, Schleher intercept factor for radar network is minimised by optimising the transmission power allocation among radars in the network such that the enhanced LPI performance for radar network can be achieved. The genetic algorithm based on nonlinear programming (GA-NP) is employed to solve the resulting nonconvex and nonlinear optimisation problem. Some simulations demonstrate that the proposed algorithm is valuable and effective to improve the LPI performance for radar network.

A novel global Harmony Search method based on Ant Colony Optimisation algorithm

NASA Astrophysics Data System (ADS)

Fouad, Allouani; Boukhetala, Djamel; Boudjema, Fares; Zenger, Kai; Gao, Xiao-Zhi

2016-03-01

The Global-best Harmony Search (GHS) is a stochastic optimisation algorithm recently developed, which hybridises the Harmony Search (HS) method with the concept of swarm intelligence in the particle swarm optimisation (PSO) to enhance its performance. In this article, a new optimisation algorithm called GHSACO is developed by incorporating the GHS with the Ant Colony Optimisation algorithm (ACO). Our method introduces a novel improvisation process, which is different from that of the GHS in the following aspects. (i) A modified harmony memory (HM) representation and conception. (ii) The use of a global random switching mechanism to monitor the choice between the ACO and GHS. (iii) An additional memory consideration selection rule using the ACO random proportional transition rule with a pheromone trail update mechanism. The proposed GHSACO algorithm has been applied to various benchmark functions and constrained optimisation problems. Simulation results demonstrate that it can find significantly better solutions when compared with the original HS and some of its variants.

Assessment of a short hypnosis in a paediatric operating room in reducing postoperative pain and anxiety: A randomised study.

PubMed

Duparc-Alegria, Nathalie; Tiberghien, Karine; Abdoul, Hendy; Dahmani, Souhayl; Alberti, Corinne; Thiollier, Anne-Francoise

2018-01-01

To assess the impact of a short hypnotic session on postoperative anxiety and pain in major orthopaedic surgery. Despite specific information given before a scheduled paediatric surgery, perioperative anxiety can become important. Randomised Clinical Study. The study is an open single-centre randomised clinical study comparing a "control" group versus a "hypnosis" group receiving a short hypnosis pre-induction session as additional experimental analgesic procedure. The primary endpoint was the postoperative anxiety, blindly assessed using a visual analogue scale. The study involved 120 children (age 10-18 years). The results showed no difference between control group versus hypnosis group. Twenty-four hours after surgery (Day+1), the patient's anxiety score was not different between control and hypnosis groups (median [Q1-Q3]: 1 [0; 3] vs. 0 [0; 3], respectively, p = .17). Each group experienced a significant decrease in anxiety level between the day before surgery (Day-1) and the day after surgery (Day+1) (median ([Q1-Q3]) difference of the anxiety score: 2 [4; 0] and 2 [4; 0], respectively, p < .0001 in each group). The postoperative pain scores were low and not different between groups (median [Q1-Q3]: 2 [0; 3] in control group vs. 3 [1; 3] in hypnosis group, p = .57). This randomised study on a short hypnosis session performed in the operating room prior to a major surgery showed no difference in postoperative anxiety and pain levels. The decrease in anxiety and pain levels may be due to the addition of nurse pre-operative interviews and optimisation in communication in the operating room. As postoperative anxiety level was low in both control and hypnosis groups, nurse pre-operative interviews and nurse training in hypnosis may contribute to the optimisation of global management and decrease the postoperative anxiety level. © 2017 John Wiley & Sons Ltd.

Le role du phytoplancton de petite taille (<20 mum) dans les variations des proprietes optiques des eaux du Saint-Laurent

NASA Astrophysics Data System (ADS)

Mas, Sebastien

Les mesures satellitaires de couleur des oceans sont largement determinees par les proprietes optiques inherentes (IOPs) des eaux de surface. D'autre part, le phytoplancton de petite taille (<20 mum) est le plus souvent dominant dans les oceans, et peut donc etre une source importante de variation des IOPs dans les oceans. Dans ce contexte, le but principal de ce doctorat etait de definir l'impact du phytoplancton (<20 mum) sur les variations des proprietes optiques de l'Estuaire et du Golfe du Saint-Laurent (Canada). Afin d'atteindre cet objectif, il etait necessaire de determiner en milieu controle les facteurs de variabilite des proprietes optiques cellulaires et des IOPs du phytoplancton (<20 mum) des eaux du Saint-Laurent, et d'evaluer la contribution du phytoplancton (<20 mum) aux proprietes optiques totales des eaux du Saint-Laurent. Des experiences en laboratoire ont montre que les variations des proprietes optiques des cellules phytoplanctoniques soumises a un cycle jour-nuit, ainsi qu'a des changements concomitants d'intensite lumineuse, peuvent contribuer significativement a la variabilite des proprietes optiques observee en milieu naturel. D'autres experiences ont, quant a elles, mis en evidence que les variations des proprietes optiques des cellules phytoplanctoniques dues aux phases de croissance peuvent alterer les IOPs des oceans, particulierement pendant les periodes de floraison. De plus, la presence de bacteries et de particules detritiques peut egalement affecter la variabilite des IOPs totales, notamment la diffusion. Au printemps, dans l'Estuaire et le Golfe du Saint-Laurent, la contribution du phytoplancton <20 mum aux IOPs presentait des differences regionales evidentes pour les proprietes d'absorption et de diffusion. En plus de la variabilite spatiale, les proprietes optiques cellulaires presentaient des variations journalieres, et ce particulierement pour le picophytoplancton. Enfin, la plupart des differences observees dans les proprietes biooptiques, particulierement l'absorption, etaient attribuables a la contribution du phytoplancton <20 mum. Ceci confirme l'importance de la structure de taille des communautes phytoplanctoniques dans les modeles bio-optiques appliques au Saint-Laurent. L'ensemble des resultats a permis de mettre en evidence l'importance des mecanismes de photoacclimatation et de synchronisation du cycle cellulaire du phytoplancton sur les variations journalieres des IOPs, ainsi que de l'etat physiologique relie au stade de croissance sur les variations temporelles a long terme des IOPs. De plus, le phytoplancton <20 mum contribue de maniere importante aux IOPs et a leur variabilite dans l'Estuaire et le Golfe du St-Laurent, et ce particulierement pour l'absorption. Cette etude de doctorat souligne donc l'importance du phytoplancton <20 mum sur la variabilite des IOPs des oceans.

Visual grading characteristics and ordinal regression analysis during optimisation of CT head examinations.

PubMed

Zarb, Francis; McEntee, Mark F; Rainford, Louise

2015-06-01

To evaluate visual grading characteristics (VGC) and ordinal regression analysis during head CT optimisation as a potential alternative to visual grading assessment (VGA), traditionally employed to score anatomical visualisation. Patient images (n = 66) were obtained using current and optimised imaging protocols from two CT suites: a 16-slice scanner at the national Maltese centre for trauma and a 64-slice scanner in a private centre. Local resident radiologists (n = 6) performed VGA followed by VGC and ordinal regression analysis. VGC alone indicated that optimised protocols had similar image quality as current protocols. Ordinal logistic regression analysis provided an in-depth evaluation, criterion by criterion allowing the selective implementation of the protocols. The local radiology review panel supported the implementation of optimised protocols for brain CT examinations (including trauma) in one centre, achieving radiation dose reductions ranging from 24 % to 36 %. In the second centre a 29 % reduction in radiation dose was achieved for follow-up cases. The combined use of VGC and ordinal logistic regression analysis led to clinical decisions being taken on the implementation of the optimised protocols. This improved method of image quality analysis provided the evidence to support imaging protocol optimisation, resulting in significant radiation dose savings. • There is need for scientifically based image quality evaluation during CT optimisation. • VGC and ordinal regression analysis in combination led to better informed clinical decisions. • VGC and ordinal regression analysis led to dose reductions without compromising diagnostic efficacy.

Optimization of a Coupling Process for Insulin Degludec According to a Quality by Design (QbD) Paradigm.

PubMed

Nie, Lei; Hu, Mingming; Yan, Xu; Guo, Tingting; Wang, Haibin; Zhang, Sheng; Qu, Haibin

2018-05-03

This case study described a successful application of the quality by design (QbD) principles to a coupling process development of insulin degludec. Failure mode effects analysis (FMEA) risk analysis was first used to recognize critical process parameters (CPPs). Five CPPs, including coupling temperature (Temp), pH of desB30 solution (pH), reaction time (Time), desB30 concentration (Conc), and molar equivalent of ester per mole of desB30 insulin (MolE), were then investigated using a fractional factorial design. The curvature effect was found significant, indicating the requirement of second-order models. Afterwards, a central composite design was built with an augmented star and center points study. Regression models were developed for the CPPs to predict the purity and yield of predegludec using above experimental data. The R 2 and adjusted R 2 were higher than 96 and 93% for the two models respectively. The Q 2 values were more than 80% indicating a good predictive ability of models. MolE was found to be the most significant factor affecting both yield and purity of predegludec. Temp, pH, and Conc were also significant for predegludec purity, while Time appeared to remarkably influence the yield model. The multi-dimensional design space and normal operating region (NOR) with a robust setpoint were determined using a probability-based Monte-Carlo simulation method. The verified experimental results showed that the design space was reliable and effective. This study enriches the understanding of acetylation process and is instructional to other complicated operations in biopharmaceutical engineering.

Structured syncope care pathways based on lean six sigma methodology optimises resource use with shorter time to diagnosis and increased diagnostic yield.

PubMed

Martens, Leon; Goode, Grahame; Wold, Johan F H; Beck, Lionel; Martin, Georgina; Perings, Christian; Stolt, Pelle; Baggerman, Lucas

2014-01-01

To conduct a pilot study on the potential to optimise care pathways in syncope/Transient Loss of Consciousness management by using Lean Six Sigma methodology while maintaining compliance with ESC and/or NICE guidelines. Five hospitals in four European countries took part. The Lean Six Sigma methodology consisted of 3 phases: 1) Assessment phase, in which baseline performance was mapped in each centre, processes were evaluated and a new operational model was developed with an improvement plan that included best practices and change management; 2) Improvement phase, in which optimisation pathways and standardised best practice tools and forms were developed and implemented. Staff were trained on new processes and change-management support provided; 3) Sustaining phase, which included support, refinement of tools and metrics. The impact of the implementation of new pathways was evaluated on number of tests performed, diagnostic yield, time to diagnosis and compliance with guidelines. One hospital with focus on geriatric populations was analysed separately from the other four. With the new pathways, there was a 59% reduction in the average time to diagnosis (p = 0.048) and a 75% increase in diagnostic yield (p = 0.007). There was a marked reduction in repetitions of diagnostic tests and improved prioritisation of indicated tests. Applying a structured Lean Six Sigma based methodology to pathways for syncope management has the potential to improve time to diagnosis and diagnostic yield.

Use of gas push-pull tests for the measurement of methane oxidation in different landfill cover soils.

PubMed

Streese-Kleeberg, Jan; Rachor, Ingke; Gebert, Julia; Stegmann, Rainer

2011-05-01

In order to optimise methane oxidation in landfill cover soils, it is important to be able to accurately quantify the amount of methane oxidised. This research considers the gas push-pull test (GPPT) as a possible method to quantify oxidation rates in situ. During a GPPT, a gas mixture consisting of one or more reactive gases (e.g., CH(4), O(2)) and one or more conservative tracers (e.g., argon), is injected into the soil. Following this, the mixture of injected gas and soil air is extracted from the same location and periodically sampled. The kinetic parameters for the biological oxidation taking place in the soil can be derived from the differences in the breakthrough curves. The original method of Urmann et al. (2005) was optimised for application in landfill cover soils and modified to reduce the analytical effort required. Optimised parameters included the flow rate during the injection phase and the duration of the experiment. 50 GPPTs have been conducted at different landfills in Germany during different seasons. Generally, methane oxidation rates ranged between 0 and 150 g m(soil air)(-3)h(-1). At one location, rates up to 440 g m(soil air)(-3)h(-1) were measured under particularly favourable conditions. The method is simple in operation and does not require expensive equipment besides standard laboratory gas chromatographs. Copyright © 2010 Elsevier Ltd. All rights reserved.

Structured Syncope Care Pathways Based on Lean Six Sigma Methodology Optimises Resource Use with Shorter Time to Diagnosis and Increased Diagnostic Yield

PubMed Central

Martens, Leon; Goode, Grahame; Wold, Johan F. H.; Beck, Lionel; Martin, Georgina; Perings, Christian; Stolt, Pelle; Baggerman, Lucas

2014-01-01

Aims To conduct a pilot study on the potential to optimise care pathways in syncope/Transient Loss of Consciousness management by using Lean Six Sigma methodology while maintaining compliance with ESC and/or NICE guidelines. Methods Five hospitals in four European countries took part. The Lean Six Sigma methodology consisted of 3 phases: 1) Assessment phase, in which baseline performance was mapped in each centre, processes were evaluated and a new operational model was developed with an improvement plan that included best practices and change management; 2) Improvement phase, in which optimisation pathways and standardised best practice tools and forms were developed and implemented. Staff were trained on new processes and change-management support provided; 3) Sustaining phase, which included support, refinement of tools and metrics. The impact of the implementation of new pathways was evaluated on number of tests performed, diagnostic yield, time to diagnosis and compliance with guidelines. One hospital with focus on geriatric populations was analysed separately from the other four. Results With the new pathways, there was a 59% reduction in the average time to diagnosis (p = 0.048) and a 75% increase in diagnostic yield (p = 0.007). There was a marked reduction in repetitions of diagnostic tests and improved prioritisation of indicated tests. Conclusions Applying a structured Lean Six Sigma based methodology to pathways for syncope management has the potential to improve time to diagnosis and diagnostic yield. PMID:24927475

La planification préalable des soins pour les patients en pédiatrie

PubMed Central

2008-01-01

RÉSUMÉ Les progrès médicaux et technologiques ont permis d’ac-croître les taux de survie et d’améliorer la qualité de vie des nourrissons, des enfants et des adolescents ayant des maladies chroniques mettant la vie en danger. La planifi-cation préalable des soins inclut le processus relié aux discussions sur les traitements essentiels au maintien de la survie et la détermination des objectifs des soins de longue durée. Les dispensateurs de soins pédiatriques ont l’obligation éthique d’assimiler cet aspect des soins médicaux. Le présent document de principes vise à aider les dispensateurs de soins à discuter de la planification préalable des soins des patients pédiatriques dans diverses situations. La planification préalable des soins exige des communications efficaces afin de clarifier les objectifs des soins et de s’entendre sur les traitements pertinents ou non pour réaliser ces objectifs, y compris les mesures de réanimation et les mesures palliatives.

Facility design, construction, and operation

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

France has been disposing of low-level radioactive waste (LLW) at the Centre de Stockage de la Manche (CSM) since 1969 and now at the Centre de Stockage de l`Aube (CSA) since 1992. In France, several agencies and companies are involved in the development and implementation of LLW technology. The Commissariat a l`Energie Atomic (CEA), is responsible for research and development of new technologies. The Agence National pour la Gestion des Dechets Radioactifs is the agency responsible for the construction and operation of disposal facilities and for wastes acceptance for these facilities. Compagnie Generale des Matieres Nucleaires provides fuel services, includingmore » uranium enrichment, fuel fabrication, and fuel reprocessing, and is thus one generator of LLW. Societe pour les Techniques Nouvelles is an engineering company responsible for commercializing CEA waste management technology and for engineering and design support for the facilities. Numatec, Inc. is a US company representing these French companies and agencies in the US. In Task 1.1 of Numatec`s contract with Martin Marietta Energy Systems, Numatec provides details on the design, construction and operation of the LLW disposal facilities at CSM and CSA. Lessons learned from operation of CSM and incorporated into the design, construction and operating procedures at CSA are identified and discussed. The process used by the French for identification, selection, and evaluation of disposal technologies is provided. Specifically, the decisionmaking process resulting in the change in disposal facility design for the CSA versus the CSM is discussed. This report provides` all of the basic information in these areas and reflects actual experience to date.« less

The neurolinguistic approach to awake surgery reviewed.

PubMed

De Witte, Elke; Mariën, Peter

2013-02-01

Intraoperative direct electrical stimulation (DES) is increasingly used in patients operated on for tumours in critical language areas. Although a positive impact of DES on postoperative linguistic outcome is generally advocated, the literature is only scantily documented with information about the linguistic methods applied in awake surgery. This article critically reviews the neurolinguistic procedures currently used in awake studies. Based on an extensive review of the literature, an overview is given of the language mapping techniques applied in brain tumour surgery. Studies investigating linguistic testing and outcome in awake surgery were analysed. Information about the timing of the assessment(s), the linguistic tasks, the linguistic stimuli and the indication for awake surgery was also discussed. Intraoperative DES remains the 'gold standard' for language mapping, but pre- and postoperative non-invasive mapping methods are important adjuncts. In the pre- and postoperative phase, standardised linguistic test batteries are generally used to assess language function. In the intraoperative phase, only naming and number counting are commonly applied. Most often no detailed information about the linguistic stimuli is provided and no standardised protocols measuring different linguistic levels have been described. Awake surgery with DES is a useful tool for preserving linguistic functions in patients undergoing surgery in critical brain regions. However, no studies exist that apply a well-balanced and standardised linguistic protocol to reliably identify the critical language zones. The availability of a standardised linguistic protocol might substantially increase intraoperative comfort and might improve outcome and quality of life. Copyright © 2012 Elsevier B.V. All rights reserved.

Flying Qualities Flight Testing of Digital Flight Control Systems. Flight Test Techniques Series - Volume 21 (les Essais en vol des performances des systemes de ommande de vol numeriques)

DTIC Science & Technology

2001-12-01

product operator, Ucg = X body axis velocity at the cg, Uvane = X body axis velocity at the cg, Vcg = Y body axis velocity at the cg, Vvane = Y body axis...Tan vane Uvane α β   =       =     (5) Ucg = VtrueCOS(βtrue)COS(αtrue) Vcg = VtrueSIN(βtrue) Wcg = VtrueCOS(βtrue)SIN...from the definitions of these angles. 2 2 2 1 1 V U V Wcg cg cgtrue Wcg Tantrue Ucg Vcg Sintrue Vtrue α β = + +  −=      −=     (12) 53

On the design and optimisation of new fractal antenna using PSO

NASA Astrophysics Data System (ADS)

Rani, Shweta; Singh, A. P.

2013-10-01

An optimisation technique for newly shaped fractal structure using particle swarm optimisation with curve fitting is presented in this article. The aim of particle swarm optimisation is to find the geometry of the antenna for the required user-defined frequency. To assess the effectiveness of the presented method, a set of representative numerical simulations have been done and the results are compared with the measurements from experimental prototypes built according to the design specifications coming from the optimisation procedure. The proposed fractal antenna resonates at the 5.8 GHz industrial, scientific and medical band which is suitable for wireless telemedicine applications. The antenna characteristics have been studied using extensive numerical simulations and are experimentally verified. The antenna exhibits well-defined radiation patterns over the band.

Lignes directrices canadiennes sur l’utilisation sécuritaire et efficace des opioïdes pour la douleur chronique non cancéreuse

PubMed Central

Kahan, Meldon; Wilson, Lynn; Mailis-Gagnon, Angela; Srivastava, Anita

2011-01-01

Résumé Objectif Présenter aux médecins de famille un résumé clinique pratique sur la prescription d’opioïdes à des populations particulières en se fondant sur les recommandations faites dans les lignes directrices canadiennes sur l’utilisation sécuritaire et efficace des opioïdes pour la douleur chronique non cancéreuse. Qualité des données Pour produire les lignes directrices, les chercheurs ont effectué une synthèse critique de la littérature médicale en insistant plus précisément sur les études de l’efficacité et de la sécurité des opioïdes dans des populations particulières. Message principal Les médecins de famille peuvent atténuer les risques de surdose, de sédation, d’usage abusif et de dépendance grâce à des stratégies adaptées à l’âge et à l’état de santé des patients. Dans le cas de patients à risque de dépendance, on devrait réserver les opioïdes aux douleurs nociceptives ou neuropathiques bien définies qui n’ont pas répondu aux traitements de première intention. Il faut procéder lentement au titrage des opioïdes, avec des dispensations fréquentes et une étroite surveillance pour dépister tout signe d’usage abusif. Une dépendance aux opioïdes suspectée est prise en charge au moyen d’une thérapie structurée aux opioïdes, d’un traitement à la méthadone ou à la buprénorphine ou encore d’un traitement fondé sur l’abstinence. Les patients souffrant de troubles de l’humeur ou d’anxiété ont tendance à avoir une réponse analgésique atténuée aux opioïdes, sont à risque plus élevé d’usage abusif et prennent souvent des sédatifs qui interagissent défavorablement avec les opioïdes. Il faut prendre des précautions semblables à celles utilisées avec d’autres patients à risque élevé. Il faut faire un sevrage progressif si la douleur du patient demeure sévère même avec un essai adéquat de thérapie aux opioïdes. Chez les personnes âgées, la sédation, les chutes et la surdose peuvent être minimisées en utilisant des doses initiales faibles, un titrage plus lent, un sevrage des benzodiazépines et une bonne éducation des patients. Dans le cas des femmes enceintes qui prennent des opioïdes chaque jour, il faut faire un sevrage progressif et cesser complètement. Si ce n’est pas possible, il faut administrer la dose efficace la plus faible. Les femmes enceintes qui ont une dépendance aux opioïdes devraient recevoir un traitement à la méthadone. Les adolescents sont à risque élevé de surdose d’opioïdes, d’usage abusif et de dépendance. Les patients qui ont des adolescents qui vivent à la maison devraient entreposer leurs opioïdes dans un lieu sûr. Les adolescents ont rarement besoin d’une thérapie à long terme aux opioïdes. Conclusion Les médecins de famille doivent tenir compte de l’âge, de la condition psychiatrique, du degré de risque de dépendance du patient et d’autres facteurs quand ils prescrivent des opioïdes pour la douleur chronique.

Post operative infections of the spine: technique, indications and results of the surgical treatment - A retrospective study of 90 cases.

PubMed

Lazennec, J Y; Laville, C; Konel, B; Roy-Camille, R; Saillant, G; Poloujadoff, M P

1996-05-01

Post operative infection in spine surgery is a well known complication. The authors studied a series of 90 patients in accordance with an homogenous strategy based on the excision of necrotic and infected tissues, associated with appropriate antibiotics.The results are analyzed according to the degree of infection (which is based on the type of germs and their associations), and type of patients, the delay in diagnosis and the anatomical extension of the infected lesions.Making a difference between superficial and deep infection is of no therapeutic value and may lead to wrong and inadequate treatment.One must separate the common infections (which are due to germs as staphylococcus aureus or others from the urinary or digestive tract), and severe infections (which are either due to a per operative massive and deep contamination, or associated with patient's poor general condition).This series is mainly about posterior approaches to the spine, with or without osteosynthesis. Technical problems for treatment depend on the site of infection, particularly at the thoracic kyphosis level, or at the lumbar level where the muscle necrosis can be extensive. At the cervical level, the infection of an anterior approach mandates a check on the respiratory and digestive tracts.Removing the osteosynthesis is not mandatory in post operative spinal infections, as it may induce severe mechanical destabilization. An anterior approach is not necessarily required in the case of a posterior infection, except with massive contamination of an anterior graft. In some cases, posterior lumbar interbody fusion can lead to the indication for anterior cage removal.Pseudarthrosis of an infected spine, initially treated to obtain fusion, is still the worst complication. In case of previous posterior infection, even a severe one, fusion can still be obtained through a secondary anterior or posterior approach for grafting, with or without osteosynthesis.In this series, there was no neurological complication due to infection.However, eight diceases occured in weak patients with neurological involvement. This points out the importance of the general treatment associated with the surgery, and the necessity of a thorough assessment. a thorough assessment.RéSUMé: Les infections post-opératoires représentent une complication largement documentée dans le domaine de la chirurgie du rachis. Les auteurs étudient une série de 90 patients traités selon une stratégie homogène basée sur l'excision des tissus nécrosés et infectés associée à l'utilisation d'un traitement antibiotique adapté. Les résultats sont analysés en fonction du degré d'infection (basé sur le type de germe et leurs associations) de l'état des patients, du délai pour le diagnostic et de l'étendue anatomique des lésions infectieuses. L'opposition entre infection superficielle et profonde semble sans intérêt sur le plan thérapeutique et peut conduire à un traitement insuffisant ou mal adapté.Il est important de séparer les infections classiques (qui sont dûes à des germes comme le staphylocoque doré ou d'autres germes provenant de la sphère urinaire ou digestive) et les infections sévères (qui sont soit dûes à une contamination per-opératoire massive et profonde ou associées à des patients dont létat général est déficient).Cette série est principalement basée sur les abord postérieurs du rachis avec ou sans ostéosynthèse. Les problèmes techniques pour le traitement dépendent du site de l'infection: aux niveaux thoracique et lombaire, la nécrose musculaire peut être très extensive. Au niveau cervical, l'infection d'un abord antérieur impose de vérifier l'intégrité du tractus aéro-digestif.L'ablation initiale du matériel n'est pas nécessaire dans beaucoup de cas d'infections post-opératoires car elle peut induire des destabilisations sévères et des complications mécaniques supplémentaires. Un abord antérieur n'est pas forcément nécessaire en cas d'infection postérieure mises à part les contaminations massives d'une greffe antérieure ou une infection d'une cage intervertébrale réalisée pour une fusion intersomatique par voie postérieure.La pseudarthrose des greffes sur un rachis infecté qui a été traité initialement pour obtenir une fusion reste encore la plus sévère des complications. Dans les cas d'infections postérieures même sévères, la fusion peut être encore obtenue secondairement grâce à un abord antérieur ultérieur ou même un abord postérieur pour des greffes complémentaires avec ou sans ostéosynthèse.Dans cette série, les auteurs ne signalent aucune complication neurologique dûe à l'infection. Néanmoins, 8 décès sont à déplorer chez des patients fragiles avec signes neurologiques initiaux. Ceci souligne l'importance du traitement général associé à la chirurgie et la nécessité d'un bilan complet de ces malades.

The dynamics of a stabilised Wien bridge oscillator

NASA Astrophysics Data System (ADS)

Lerner, L.

2016-11-01

We present for the first time analytic solutions for the nonlinear dynamics of a Wien bridge oscillator stabilised by three common methods: an incandescent lamp, signal diodes, and the field effect transistor. The results can be used to optimise oscillator design, and agree well with measurements. The effect of operational amplifier marginal nonlinearity on oscillator performance at high frequencies is clarified. The oscillator circuits and their analysis can be used to demonstrate nonlinear dynamics in the undergraduate laboratory.

Efficient 'Foton' electric-discharge KrCl laser

DOE Office of Scientific and Technical Information (OSTI.GOV)

Panchenko, Aleksei N; Tarasenko, Viktor F

The design of the 'Foton' electric-discharge laser, optimised for operation on the basis of KrCl* molecules, and its energy parameters were investigated. At {lambda} = 222 nm the radiation energy was up to 250 mJ per pulse. The specific output radiation energy was 2.5 J litre{sup -1} and the laser efficiency was in excess of 0.8%. The possibility of further improvement of the characteristics of electric-discharge KrCl lasers are discussed. (lasers)

Allergy medical care network: a new model of care for specialties.

PubMed

Ferré-Ybarz, L; Salinas Argente, R; Nevot Falcó, S; Gómez Galán, C; Franquesa Rabat, J; Trapé Pujol, J; Oliveras Alsina, P; Pons Serra, M; Corbella Virós, X

2015-01-01

In 2005 the Althaia Foundation Allergy Department performed its daily activity in the Hospital Sant Joan de Deu of Manresa. Given the increasing demand for allergy care, the department's performance was analysed and a strategic plan (SP) for 2005-2010 was designed. The main objective of the study was to assess the impact of the application of the SP on the department's operations and organisational level in terms of profitability, productivity and quality of care. Descriptive, retrospective study which evaluated the operation of the allergy department. The baseline situation was analysed and the SP was designed. Indicators were set to perform a comparative analysis after application of the SP. The indicators showed an increase in medical care activity (first visits, 34%; successive visits, 29%; day hospital treatments, 51%), high rates of resolution, reduced waiting lists. Economic analysis indicated an increase in direct costs justified by increased activity and territory attended. Cost optimisation was explained by improved patient accessibility, minimised absenteeism in the workplace and improved cost per visit. After application of the SP a networking system was established for the allergy speciality that has expanded the territory for which it provides care, increased total activity and the ability to resolve patients, optimised human resources, improved quality of care and streamlined medical costs. Copyright © 2013 SEICAP. Published by Elsevier Espana. All rights reserved.

Revisiting the role of durable polymers in cardiovascular devices.

PubMed

Mori, Hiroyoshi; Otsuka, Fumiyuki; Gupta, Anuj; Jinnouchi, Hiroyuki; Torii, Sho; Harari, Emanuel; Virmani, Renu; Finn, Aloke V

2017-11-01

Polymers are an essential component of drug-eluting stents (DES) used to control drug release but remain the most controversial component of DES technology. There are two types of polymers employed in DES: durable polymer based DES (DP-DES) and biodegradable polymer DES (BP-DES). First-generation DES were exclusively composed of DP and demonstrated increased rates of late stent failure due in part to poor polymer biocompatibility. Newer generations DES use more biocompatible durable polymers or biodegradable polymers. Areas covered: We will cover issues identified with 1st-generation DP-DES, areas of success and failure in 2nd-generation DP-DES and examine the promise and shortcomings of BP-DES. Briefly, fluorinated polymers used in 2nd-generation DP-DES have excellent anti-thrombogenicity and better biocompatibility than 1st-generation DES polymers. However, these devices lead to persistent drug exposure to the endothelium which impairs endothelial function and predisposes towards neoatherosclerosis. Meanwhile, BP-DES has shortened the duration of drug exposure which might be beneficial for endothelial functional recovery leading to less neoatherosclerosis. However, it remains uncertain whether the long-term biocompatibility of bare metal surfaces is better than that of polymer-coated metals. Expert commentary: Each technology has distinct advantages, which can be optimized depending upon the particular characteristics of the patient being treated.

Comparing performances of a CdTe X-ray spectroscopic detector and an X-ray dual-energy sandwich detector

NASA Astrophysics Data System (ADS)

Gorecki, A.; Brambilla, A.; Moulin, V.; Gaborieau, E.; Radisson, P.; Verger, L.

2013-11-01

Multi-energy (ME) detectors are becoming a serious alternative to classical dual-energy sandwich (DE-S) detectors for X-ray applications such as medical imaging or explosive detection. They can use the full X-ray spectrum of irradiated materials, rather than disposing only of low and high energy measurements, which may be mixed. In this article, we intend to compare both simulated and real industrial detection systems, operating at a high count rate, independently of the dimensions of the measurements and independently of any signal processing methods. Simulations or prototypes of similar detectors have already been compared (see [1] for instance), but never independently of estimation methods and never with real detectors. We have simulated both an ME detector made of CdTe - based on the characteristics of the MultiX ME100 and - a DE-S detector - based on the characteristics of the Detection Technology's X-Card 1.5-64DE model. These detectors were compared to a perfect spectroscopic detector and an optimal DE-S detector. For comparison purposes, two approaches were investigated. The first approach addresses how to distinguise signals, while the second relates to identifying materials. Performance criteria were defined and comparisons were made over a range of material thicknesses and with different photon statistics. Experimental measurements in a specific configuration were acquired to checks simulations. Results showed good agreement between the ME simulation and the ME100 detector. Both criteria seem to be equivalent, and the ME detector performs 3.5 times better than the DE-S detector with same photon statistics based on simulations and experimental measurements. Regardless of the photon statistics ME detectors appeared more efficient than DE-S detectors for all material thicknesses between 1 and 9 cm when measuring plastics with an attenuation signature close that of explosive materials. This translates into an improved false detection rate (FDR): DE-S detectors have an FDR 2.87±0.03-fold higher than ME detectors for 4 cm of POM with 20 000 incident photons, when identifications are screened against a two-material base.

Etude numerique et experimentale de la reponse vibro-acoustique des structures raidies a des excitations aeriennes et solidiennes

NASA Astrophysics Data System (ADS)

Mejdi, Abderrazak

Les fuselages des avions sont generalement en aluminium ou en composite renforces par des raidisseurs longitudinaux (lisses) et transversaux (cadres). Les raidisseurs peuvent etre metalliques ou en composite. Durant leurs differentes phases de vol, les structures d'avions sont soumises a des excitations aeriennes (couche limite turbulente : TBL, champs diffus : DAF) sur la peau exterieure dont l'energie acoustique produite se transmet a l'interieur de la cabine. Les moteurs, montes sur la structure, produisent une excitation solidienne significative. Ce projet a pour objectifs de developper et de mettre en place des strategies de modelisations des fuselages d'avions soumises a des excitations aeriennes et solidiennes. Tous d'abord, une mise a jour des modeles existants de la TBL apparait dans le deuxieme chapitre afin de mieux les classer. Les proprietes de la reponse vibro-acoustique des structures planes finies et infinies sont analysees. Dans le troisieme chapitre, les hypotheses sur lesquelles sont bases les modeles existants concernant les structures metalliques orthogonalement raidies soumises a des excitations mecaniques, DAF et TBL sont reexamines en premier lieu. Ensuite, une modelisation fine et fiable de ces structures est developpee. Le modele est valide numeriquement a l'aide des methodes des elements finis (FEM) et de frontiere (BEM). Des tests de validations experimentales sont realises sur des panneaux d'avions fournis par des societes aeronautiques. Au quatrieme chapitre, une extension vers les structures composites renforcees par des raidisseurs aussi en composites et de formes complexes est etablie. Un modele analytique simple est egalement implemente et valide numeriquement. Au cinquieme chapitre, la modelisation des structures raidies periodiques en composites est beaucoup plus raffinee par la prise en compte des effets de couplage des deplacements planes et transversaux. L'effet de taille des structures finies periodiques est egalement pris en compte. Les modeles developpes ont permis de conduire plusieurs etudes parametriques sur les proprietes vibro-acoustiques des structures d'avions facilitant ainsi la tache des concepteurs. Dans le cadre de cette these, un article a ete publie dans le Journal of Sound and Vibration et trois autres soumis, respectivement aux Journal of Acoustical Society of America, International Journal of Solid Mechanics et au Journal of Sound and Vibration Mots cles : structures raidies, composites, vibro-acoustique, perte par transmission.

Effectiveness of an implementation optimisation intervention aimed at increasing parent engagement in HENRY, a childhood obesity prevention programme - the Optimising Family Engagement in HENRY (OFTEN) trial: study protocol for a randomised controlled trial.

PubMed

Bryant, Maria; Burton, Wendy; Cundill, Bonnie; Farrin, Amanda J; Nixon, Jane; Stevens, June; Roberts, Kim; Foy, Robbie; Rutter, Harry; Hartley, Suzanne; Tubeuf, Sandy; Collinson, Michelle; Brown, Julia

2017-01-24

Family-based interventions to prevent childhood obesity depend upon parents' taking action to improve diet and other lifestyle behaviours in their families. Programmes that attract and retain high numbers of parents provide an enhanced opportunity to improve public health and are also likely to be more cost-effective than those that do not. We have developed a theory-informed optimisation intervention to promote parent engagement within an existing childhood obesity prevention group programme, HENRY (Health Exercise Nutrition for the Really Young). Here, we describe a proposal to evaluate the effectiveness of this optimisation intervention in regard to the engagement of parents and cost-effectiveness. The Optimising Family Engagement in HENRY (OFTEN) trial is a cluster randomised controlled trial being conducted across 24 local authorities (approximately 144 children's centres) which currently deliver HENRY programmes. The primary outcome will be parental enrolment and attendance at the HENRY programme, assessed using routinely collected process data. Cost-effectiveness will be presented in terms of primary outcomes using acceptability curves and through eliciting the willingness to pay for the optimisation from HENRY commissioners. Secondary outcomes include the longitudinal impact of the optimisation, parent-reported infant intake of fruits and vegetables (as a proxy to compliance) and other parent-reported family habits and lifestyle. This innovative trial will provide evidence on the implementation of a theory-informed optimisation intervention to promote parent engagement in HENRY, a community-based childhood obesity prevention programme. The findings will be generalisable to other interventions delivered to parents in other community-based environments. This research meets the expressed needs of commissioners, children's centres and parents to optimise the potential impact that HENRY has on obesity prevention. A subsequent cluster randomised controlled pilot trial is planned to determine the practicality of undertaking a definitive trial to robustly evaluate the effectiveness and cost-effectiveness of the optimised intervention on childhood obesity prevention. ClinicalTrials.gov identifier: NCT02675699 . Registered on 4 February 2016.

Flat-panel display solutions for ground-environment military displays (Invited Paper)

NASA Astrophysics Data System (ADS)

Thomas, J., II; Roach, R.

2005-05-01

Displays for military vehicles have very distinct operational and cost requirements that differ from other military applications. These requirements demand that display suppliers to Army and Marine ground-environments provide low cost equipment that is capable of operation across environmental extremes. Inevitably, COTS components form the foundation of these "affordable" display solutions. This paper will outline the major display requirements and review the options that satisfy conflicting and difficult operational demands, using newly developed equipment as an example. Recently, a new supplier was selected for the Drivers Vision Enhancer (DVE) equipment, including the Display Control Module (DCM). The paper will outline the DVE and describe development of a new DCM solution. The DVE programme, with several thousand units presently in service and operational in conflicts such as "Operation Iraqi Freedom", represents a critical balance between cost and performance. We shall describe design considerations that include selection of COTS sources, the need to minimise display modification; video interfaces, power interfaces, operator interfaces and new provisions to optimise displayed video content.

Critical analysis of submerged membrane sequencing batch reactor operating conditions.

PubMed

McAdam, Ewan; Judd, Simon J; Gildemeister, René; Drews, Anja; Kraume, Matthias

2005-10-01

To evaluate the Submerged Membrane Sequencing Batch Reactor process, several short-term studies were conducted to define critical flux, membrane aeration and intermittent filtration operation. Critical flux trials indicated that as mixed liquor suspended solids increased in concentration so would the propensity for membrane fouling. Consequently in order to characterise the impact of biomass concentration increase (that develops during permeate withdrawal) upon submerged microfiltration operation, two longer term studies were conducted, one with a falling hydraulic head and another with a continuous hydraulic head (as in membrane bio-reactors). Trans membrane pressure data was used to predict the maximum possible operating periods at 10 and 62 days for the falling hydraulic head and continuous hydraulic head respectively. Further analysis revealed that falling hydraulic head operation would require 21% more aeration to maintain a consistent crossflow velocity than continuous operation and would rely on pumping for full permeate withdrawal 80% earlier. This study concluded that further optimisation would be required to make this technology technically and economically viable.

Radiation dose optimisation for conventional imaging in infants and newborns using automatic dose management software: an application of the new 2013/59 EURATOM directive.

PubMed

Alejo, L; Corredoira, E; Sánchez-Muñoz, F; Huerga, C; Aza, Z; Plaza-Núñez, R; Serrada, A; Bret-Zurita, M; Parrón, M; Prieto-Areyano, C; Garzón-Moll, G; Madero, R; Guibelalde, E

2018-04-09

Objective: The new 2013/59 EURATOM Directive (ED) demands dosimetric optimisation procedures without undue delay. The aim of this study was to optimise paediatric conventional radiology examinations applying the ED without compromising the clinical diagnosis. Automatic dose management software (ADMS) was used to analyse 2678 studies of children from birth to 5 years of age, obtaining local diagnostic reference levels (DRLs) in terms of entrance surface air kerma. Given local DRL for infants and chest examinations exceeded the European Commission (EC) DRL, an optimisation was performed decreasing the kVp and applying the automatic control exposure. To assess the image quality, an analysis of high-contrast resolution (HCSR), signal-to-noise ratio (SNR) and figure of merit (FOM) was performed, as well as a blind test based on the generalised estimating equations method. For newborns and chest examinations, the local DRL exceeded the EC DRL by 113%. After the optimisation, a reduction of 54% was obtained. No significant differences were found in the image quality blind test. A decrease in SNR (-37%) and HCSR (-68%), and an increase in FOM (42%), was observed. ADMS allows the fast calculation of local DRLs and the performance of optimisation procedures in babies without delay. However, physical and clinical analyses of image quality remain to be needed to ensure the diagnostic integrity after the optimisation process. Advances in knowledge: ADMS are useful to detect radiation protection problems and to perform optimisation procedures in paediatric conventional imaging without undue delay, as ED requires.

Retour vers le futur: l'expérience des patients et le lien avec la qualité, la sécurité et le rendement financier.

PubMed

Cochrane, Bonnie S; Hagins, Mitch; King, John A; Picciano, Gino; McCafferty, Maureen M; Nelson, Brian

2015-11-01

Au Canada, l'amélioration de l'expérience des patients est devenue une priorité des politiques de santé. Le perfectionnement et la normalisation des outils et systèmes pour surveiller les mesures de l'expérience des patients augmentent, tandis que la tendance vers une plus grande reddition de compte sur des améliorations durables et abordables se confirme. Pour de nombreux professionnels de la santé, ce phénomène fait foi d'un intérêt renouvelé pour les besoins et priorités fondamentaux des patients, après des décennies où les changements structurels et technologiques ont dominé les programmes de santé. Pour les leaders en santé canadiens, l'amélioration de l'expérience des patients comporte actuellement de grands défis et de belles possibilités. À cet égard, l'expérience des organisations partenaires du groupe Studer au Canada est à la fois pertinente et instructive. Ces organisations ont adopté un modèle, du nom de Evidence-Based Leadership (EBL, ou leadership fondé sur des données probantes), qui favorise et soutient l'harmonisation de l'ensemble des activités et des comportements, conformément à des objectifs organisationnels précis, y compris des améliorations mesurables de l'expérience des patients. Le présent article expose des études de cas d'organisations qui ont adopté l'EBL. Ces organisations ont réalisé des progrès rapides en matière d'indicateurs de l'expérience des patients, ainsi que dans des secteurs essentiels comme les résultats cliniques, la sécurité et le rendement financier. Les données émergentes sur les facteurs et processus qui sous-tendent ces améliorations sont également abordées. © 2015 Collège canadien des leaders en santé

Funding of Schools, 2000-2001 School Year = Financement des ecoles, Annee scolaire 2000-2001.

ERIC Educational Resources Information Center

Manitoba Dept. of Education and Training, Winnipeg.

Available in English or French, this reference guide summarizes the funding of Manitoba public schools for the 2000-2001 school year. School funding for operating and capital expenses is administered by the provincial government. Following a list of 2000-2001 revisions to the Schools Finance Program, the first section describes base support. The…

47 CFR 80.103 - Digital selective calling (DSC) operating procedures.

Code of Federal Regulations, 2010 CFR

2010-10-01

... DSC “Acknowledgment of distress calls” and “Distress relays.” (See subpart W of this part.) (d) Group calls to vessels under the common control of a single entity are authorized. A group call identity may... (ITU), Place des Nations, CH-1211 Geneva 20, Switzerland. [68 FR 46961, Aug. 7, 2003, as amended at 73...

47 CFR 80.103 - Digital selective calling (DSC) operating procedures.

Code of Federal Regulations, 2011 CFR

2011-10-01

... DSC “Acknowledgment of distress calls” and “Distress relays.” (See subpart W of this part.) (d) Group calls to vessels under the common control of a single entity are authorized. A group call identity may... (ITU), Place des Nations, CH-1211 Geneva 20, Switzerland. [68 FR 46961, Aug. 7, 2003, as amended at 73...

Integration of Monte-Carlo ray tracing with a stochastic optimisation method: application to the design of solar receiver geometry.

PubMed

Asselineau, Charles-Alexis; Zapata, Jose; Pye, John

2015-06-01

A stochastic optimisation method adapted to illumination and radiative heat transfer problems involving Monte-Carlo ray-tracing is presented. A solar receiver shape optimisation case study illustrates the advantages of the method and its potential: efficient receivers are identified using a moderate computational cost.

Topology optimisation for natural convection problems

NASA Astrophysics Data System (ADS)

Alexandersen, Joe; Aage, Niels; Andreasen, Casper Schousboe; Sigmund, Ole

2014-12-01

This paper demonstrates the application of the density-based topology optimisation approach for the design of heat sinks and micropumps based on natural convection effects. The problems are modelled under the assumptions of steady-state laminar flow using the incompressible Navier-Stokes equations coupled to the convection-diffusion equation through the Boussinesq approximation. In order to facilitate topology optimisation, the Brinkman approach is taken to penalise velocities inside the solid domain and the effective thermal conductivity is interpolated in order to accommodate differences in thermal conductivity of the solid and fluid phases. The governing equations are discretised using stabilised finite elements and topology optimisation is performed for two different problems using discrete adjoint sensitivity analysis. The study shows that topology optimisation is a viable approach for designing heat sink geometries cooled by natural convection and micropumps powered by natural convection.

Autonomous calibration of single spin qubit operations

NASA Astrophysics Data System (ADS)

Frank, Florian; Unden, Thomas; Zoller, Jonathan; Said, Ressa S.; Calarco, Tommaso; Montangero, Simone; Naydenov, Boris; Jelezko, Fedor

2017-12-01

Fully autonomous precise control of qubits is crucial for quantum information processing, quantum communication, and quantum sensing applications. It requires minimal human intervention on the ability to model, to predict, and to anticipate the quantum dynamics, as well as to precisely control and calibrate single qubit operations. Here, we demonstrate single qubit autonomous calibrations via closed-loop optimisations of electron spin quantum operations in diamond. The operations are examined by quantum state and process tomographic measurements at room temperature, and their performances against systematic errors are iteratively rectified by an optimal pulse engineering algorithm. We achieve an autonomous calibrated fidelity up to 1.00 on a time scale of minutes for a spin population inversion and up to 0.98 on a time scale of hours for a single qubit π/2 -rotation within the experimental error of 2%. These results manifest a full potential for versatile quantum technologies.

Thermodynamics and performance of the Mg-H-F system for thermochemical energy storage applications.

PubMed

Tortoza, Mariana S; Humphries, Terry D; Sheppard, Drew A; Paskevicius, Mark; Rowles, Matthew R; Sofianos, M Veronica; Aguey-Zinsou, Kondo-Francois; Buckley, Craig E

2018-01-24

Magnesium hydride (MgH 2 ) is a hydrogen storage material that operates at temperatures above 300 °C. Unfortunately, magnesium sintering occurs above 420 °C, inhibiting its application as a thermal energy storage material. In this study, the substitution of fluorine for hydrogen in MgH 2 to form a range of Mg(H x F 1-x ) 2 (x = 1, 0.95, 0.85, 0.70, 0.50, 0) composites has been utilised to thermodynamically stabilise the material, so it can be used as a thermochemical energy storage material that can replace molten salts in concentrating solar thermal plants. These materials have been studied by in situ synchrotron X-ray diffraction, differential scanning calorimetry, thermogravimetric analysis, temperature-programmed-desorption mass spectrometry and Pressure-Composition-Isothermal (PCI) analysis. Thermal analysis has determined that the thermal stability of Mg-H-F solid solutions increases proportionally with fluorine content, with Mg(H 0.85 F 0.15 ) 2 having a maximum rate of H 2 desorption at 434 °C, with a practical hydrogen capacity of 4.6 ± 0.2 wt% H 2 (theoretical 5.4 wt% H 2 ). An extremely stable Mg(H 0.43 F 0.57 ) 2 phase is formed upon the decomposition of each Mg-H-F composition of which the remaining H 2 is not released until above 505 °C. PCI measurements of Mg(H 0.85 F 0.15 ) 2 have determined the enthalpy (ΔH des ) to be 73.6 ± 0.2 kJ mol -1 H 2 and entropy (ΔS des ) to be 131.2 ± 0.2 J K -1 mol -1 H 2 , which is slightly lower than MgH 2 with ΔH des of 74.06 kJ mol -1 H 2 and ΔS des = 133.4 J K -1 mol -1 H 2 . Cycling studies of Mg(H 0.85 F 0.15 ) 2 over six absorption/desorption cycles between 425 and 480 °C show an increased usable cycling temperature of ∼80 °C compared to bulk MgH 2 , increasing the thermal operating temperatures for technological applications.

A supportive architecture for CFD-based design optimisation

NASA Astrophysics Data System (ADS)

Li, Ni; Su, Zeya; Bi, Zhuming; Tian, Chao; Ren, Zhiming; Gong, Guanghong

2014-03-01

Multi-disciplinary design optimisation (MDO) is one of critical methodologies to the implementation of enterprise systems (ES). MDO requiring the analysis of fluid dynamics raises a special challenge due to its extremely intensive computation. The rapid development of computational fluid dynamic (CFD) technique has caused a rise of its applications in various fields. Especially for the exterior designs of vehicles, CFD has become one of the three main design tools comparable to analytical approaches and wind tunnel experiments. CFD-based design optimisation is an effective way to achieve the desired performance under the given constraints. However, due to the complexity of CFD, integrating with CFD analysis in an intelligent optimisation algorithm is not straightforward. It is a challenge to solve a CFD-based design problem, which is usually with high dimensions, and multiple objectives and constraints. It is desirable to have an integrated architecture for CFD-based design optimisation. However, our review on existing works has found that very few researchers have studied on the assistive tools to facilitate CFD-based design optimisation. In the paper, a multi-layer architecture and a general procedure are proposed to integrate different CFD toolsets with intelligent optimisation algorithms, parallel computing technique and other techniques for efficient computation. In the proposed architecture, the integration is performed either at the code level or data level to fully utilise the capabilities of different assistive tools. Two intelligent algorithms are developed and embedded with parallel computing. These algorithms, together with the supportive architecture, lay a solid foundation for various applications of CFD-based design optimisation. To illustrate the effectiveness of the proposed architecture and algorithms, the case studies on aerodynamic shape design of a hypersonic cruising vehicle are provided, and the result has shown that the proposed architecture and developed algorithms have performed successfully and efficiently in dealing with the design optimisation with over 200 design variables.

History of the treatment of scapula fractures.

PubMed

Bartonícek, Jan; Cronier, Patrick

2010-01-01

The history of treatment of scapula fractures is closely connected with the history of the French surgery. Paré (Les œuvres d´Ambroise Paré, conseiller, et premier chirurgien du Roy, Gabriel Buon, Paris, p VCV, 1579), Petit (Traité des maladies des os. Tome second, Charles-Etienne Hochereau, Paris, pp 122–138, 1723), Du Verney (Traité des maladies des os. Tome I, de Burre, Paris, pp 220–231, 1751) and Desault (Œuvres chirurgicales, ou tableau de la doctrine et de la pratique dans le traitement des maladies externes par Xav. Bichat, Desault, Méquignon, Devilliers, Deroi, Paris, pp 98–106, 1798) were the first to point out the existence of these fractures. The first drawing of a scapula fracture was presented by Vogt (Dissertatio de ambarum scapularum dextroeque simul claviculae fractura rara, Dissertatione Universitae Vitembergensi, Wittenberg, 1799). This author was also the first to describe the scapula fracture associated with ipsilateral fracture of the clavicle. The first radiograph of scapula fracture (glenoid fossa fracture) was published by Struthers (Edinburgh Med J 4(3):147–149, 1910). The first internal fixation of scapula fracture using plate was done by Lambotte (1910) who was followed by Lane (The operative treatment of fractures, Medical Publishing Co, London, pp 99–101, 1914) and later by Lenormant (Sur l´ostéosynthèse dans certains fractures de l´omoplate Bulletins et mémoires de la Société de chirgie de Paris, pp 1501–1502, 1923), Dujarier (Fracture du col chirgical de l´omoplate. Ostéosynthèse par plaque en T. Bonne réduction. Bulletin et mémoires de la Société de chirurgie de Paris, pp 1492–1493, 1923) and Basset (Ostéosynthèse d´une fracture de l´omoplate. Bulletin et mémoires de la Société nationale de chirurgie. p 193, 1924). Dupont and Evrard (J Chir (Paris) 39:528–534, 1932) presented the first detailed description of the surgical approach along the lateral border of the scapula including two drawings. They were also the first to use the term “pillar of scapula”. Judet (Acta Orthop Belg 30:673–678, 1964) advocated operative treatment of displaced scapula fractures and described extensile posterior approach. Based on the French school, AO/ASIF improved methods of internal fixation of these fractures.

Preface: Materiaux 2010

NASA Astrophysics Data System (ADS)

Cheikhrouhou, Abdelwaheb

2012-02-01

The national conference 'MATERIAUX 2010', which took place in Mahdia (Tunisia), from 4-7 November 2010 was organized by The 'Tunisian Materials Research Society: Tu-MRS' in collaboration with the Materials Physics Laboratory of Sfax 'LPM', Faculty of Sciences, Sfax University and the Research Unit ' Physique, Informatique et Mathématiques ', Faculty of Sciences, Gafsa University The First National Conference on Materials 'MATERIAUX 2006' was organized in Douz (Tunisia) in December 2006. This was followed by 'MATERIAUX 2007' held in Hammamet (Tunisia) in April 2007 and the National Conference 'MATERIAUX 2009' organized jointly with the Second 'Journées Internationales de la Physique des Matériaux et Applications: JIPMA 2009' in Gafsa (Tunisia) from 20-24 December 2009. 'MATERIAUX 2010' is intended to provide an excellent opportunity for National, Maghreb and International researchers to make their own work on materials known to a wider audience and to have discussions with other participants. This conference will also be an opportunity to exchange experiences, create and consolidate cooperation between different research structures in the Maghreb countries and also the countries around the Mediterranean. This conference will equally promote research development, contribution to collaboration between universities and the socio-economical milieu. More than 300 senior researchers, Professors, PhD and Masters students attended this conference from Tunisia, Algeria, Morocco, France, Spain and Canada. Several researchers, engineers and managers from industrial firms also attended. The conference consisted of plenary talks (8), oral contributions (40) and poster presentations (250). The topics of the Conference were: Nano-materials, nano-systems, thin films, surfaces and interfaces, applications Multifunctionnal materials, magnetic materials, dielectric materials, superconducting materials, applications,... Materials for electronics, informatics and communication Ceramics, glasses, polymers Natural materials (phosphates, clay,...) Metallic materials, alloys, metallurgy,... Others (materials and environment, materials and energy, biomaterials,...) I want to thank the scientific committee, the organizing committee, the local committee and everyone who contributed to the organization of this meeting for their invaluable efforts in order to guarantee the complete success of this conference. Abdelwaheb Cheikhrouhou President of 'Tu-MRS' Chairman of the Conference 'MATERIAUX 2010' Conference photograph Committies Organizing Committee Chairman CHEIKHROUHOU Abdelwaheb (Faculté des Sciences de Sfax) Members ALAYA Sahbi (Faculté des Sciences de Gabès) BENNACEUR Raouf (Faculté des Sciences de Tunis) BEN SALEM Mohamed (Faculté des Sciences de Bizerte) CHEIKHROUHOU-KOUBAA Wissem (Faculté des Sciences de Sfax) EL JANI Belgacem (Faculté des Sciences de Monastir) EZZAOUIA Hatem (Centre de Recherches et de Technologies de l'Energie, Technopole de Borj Cédria) LAMLOUMI Jilani (Ecole Supérieure des Sciences et Techniques de Tunis) REZIG Bahri (Ecole Nationale d'Ingénieurs de Tunis) Local Committee Chairman CHEIKHROUHOU Abdelwaheb (Faculté des Sciences de Sfax) Members CHEIKHROUHOU-KOUBAA Wissem (Faculté des Sciences de Sfax) KOUBAA Mohamed (Institut Supérieur de Biotechnologie de Sfax) NJEH Anwar (Institut Préparatoire aux Etudes d'Ingénieurs de Sfax) BEN SALAH Issam (Faculté des Sciences de Sfax) TAKKALI Férid (Faculté des Sciences de Sfax) REGAIEG Yassin (Faculté des Sciences de Sfax) OTHMANI Safa (Faculté des Sciences de Sfax) MNASSRI Rafik (Faculté des Sciences de Sfax) Secretariat BEN GHOZLEN Afifa (Faculté des Sciences de Sfax) BOUGHARIOU Sana (Faculté des Sciences de Sfax) Scientific Committee M. ADDOU, Faculté des Sciences de Kénitra (Morocco) N. AMDOUNI, Faculté des Sciences de Tunis (Tunisia) M. BACCOUCHE, Faculté des Sciences d'Annaba (Algeria) H. BATIS, Faculté des Sciences de Tunis (Tunisia) A. BELAFHAL, Faculté des Sciences d'El Jadida (Morocco) M.H. BEN GHOZLEN, Faculté des Sciences de Sfax (Tunisia) R. BENNACEUR, Faculté des Sciences de Tunis (Tunisia) B. BENYOUCEF, Université Abou Bakr Belkaid, Tlemcen (Algeria) M. BEN SALEM, Faculté des Sciences de Bizerte (Tunisia) B. BESSAIES, Centre de Recherches et Technologies de l'Energie (Tunisia) H. BOUCHRIHA, Faculté des Sciences de Tunis (Tunisia) W. BOUJELBEN, Faculté des Sciences de Sfax (Tunisia) A. CHEIKHROUHOU, Faculté des Sciences de Sfax (Tunisia) W. CHEIKHROUHOU-KOUBAA, Faculté des Sciences de Sfax (Tunisia) R. CHTOUROU, Centre de Recherches et Technologies de l'Energie (Tunisia) M. DEBBABI, Ecole Nationale d'Ingénieurs de Monastir (Tunisia) A. DAKHLAOUI, Faculté des Sciences de Bizerte (Tunisia) A. DINIA, Université de Strasbourg (France) B. ELJANI, Faculté des Sciences de Monastir (Tunisia) A. ELJAZOULI, Faculté des Sciences Ben Msik, Casablanca (Morocco) Z. FAKHFAKH, Faculté des Sciences de Sfax (Tunisia) A. GASMI, Faculté des Sciences d'Annaba (Algeria) A. GHARBI, Faculté des Sciences de Tunis (Tunisia) R. GHARBI, Faculté des Sciences de Sfax (Tunisia) K. GUIDARA, Faculté des Sciences de Sfax (Tunisia) H. GUERMAZI, Institut Préparatoire aux Etudes d'Ingénieurs de Sfax (Tunisia) S. GUERMAZI, Faculté des Sciences de Sfax (Tunisia) M. HADDAD, Faculté des Sciences de Meknès (Morocco) A. HAJ AMARA, Faculté des Sciences de Bizerte (Tunisia) D. HAMANA, Faculté des Sciences de Constantine (Algeria) N. KAMOUN, Faculté des Sciences de Tunis (Tunisia) S. KADDOUR-CHARFI, Faculté des Sciences de Tunis (Tunisia) M. KADDOUR, Faculté des Sciences de Sfax (Tunisia) M. KHITOUNI, Faculté des Sciences de Sfax (Tunisia) T. MHIRI, Faculté des Sciences de Sfax (Tunisia) Y. MLIK, Institut Préparatoire aux Etudes Scientifiques et Techniques (Tunisia) N. MLIKI, Faculté des Sciences de Tunis (Tunisia) A. NJAH, Faculté des Sciences de Gafsa (Tunisia) M. OUESLATI, Faculté des Sciences de Tunis (Tunisia) K. ZELLAMA, Faculté des Sciences d'Amiens (France) Invited Speakers AMMAR-MERIAH Souad, ITODYS, Université Paris Diderot (France) BEN SALEM Mohamed, Faculté des Sciences de Bizerte, Université du 7 Novembre á Carthage (Tunisia) CHEIKHROUHOU Abdelwaheb, Faculté des Sciences de Sfax, Université de Sfax (Tunisia) DAKHLAOUI Amel, Faculté des Sciences de Bizerte, Université du 7 Novembre á Carthage (Tunisia) DJABBAR Ahmed, Université des Sciences et des Technologies de Lille (France) DURASTANTI Félix, Centre d'Etudes et Recherche en Thermique, Environnement et Systèmes (C.E.R.T.E.S.), Université Paris Est- Créteil (France) FERY-FORGUES Suzanne, Université Paul Sabatier, Toulouse (France) GIRAUD Romain, Laboratoire de Photonique et de Nanostructures, CNRS/LPN, Marcoussis (France)

NATO Glossary of Abbreviations Used in NATO Documents and Publications (glossaire otan des abreviations utilisees dans les documents et publications otan)

DTIC Science & Technology

2005-01-01

coordination de la terminologie (ONTC). BUT 7. L’AAP-15 poursuit trois objectifs : a. aider les lecteurs qui n’ont pas accès à la base de données...support operations centre 1. centre d’opérations d’appui aérien 2. alternate sector operations centre 2. centre d’opérations de secteur de rechange...tactique corrigée COS 1. centre d’opérations de secteur 1. sector operations centre /SOC 1./ 2. chief of staff 2. chef d’état-major /CEM 1

Les effets des interfaces sur les proprietes magnetiques et de transport des multicouches nickel/iron et cobalt/silver

NASA Astrophysics Data System (ADS)

Veres, Teodor

Cette these est consacree a l'etude de l'evolution structurale des proprietes magnetiques et de transport des multicouches Ni/Fe et nanostructures a base de Co et de l'Ag. Dans une premiere partie, essentiellement bibliographique, nous introduisons quelques concepts de base relies aux proprietes magnetiques et de transport des multicouches metalliques. Ensuite, nous presentons une breve description des methodes d'analyse des resultats. La deuxieme partie est consacree a l'etude des proprietes magnetiques et de transport des multicouches ferromagnetiques/ferromagnetiques Ni/Fe. Nous montrerons qu'une interpretation coherente de ces proprietes necessite la prise en consideration des effets des interfaces. Nous nous attacherons a mettre en evidence, a evaluer et a etudier les effets de ces interfaces ainsi que leur evolution, et ce, suite a des traitements thermiques tel que le depot a temperature elevee et l'irradiation ionique. Les analyses correlees de la structure et de la magnetoresistance nous permettront d'emettre des conclusions sur l'influence des couches tampons entre l'interface et le substrat ainsi qu'entre les couches elles-memes sur le comportement magnetique des couches F/F. La troisieme partie est consacree aux systemes a Magneto-Resistance Geante (MRG) a base de Co et Ag. Nous allons etudier l'evolution de la microstructure suite a l'irradiation avec des ions Si+ ayant une energie de 1 MeV, ainsi que les effets de ces changements sur le comportement magnetique. Cette partie debutera par l'analyse des proprietes d'une multicouche hybride, intermediaire entre les multicouches et les materiaux granulaires. Nous analyserons a l'aide des mesures de diffraction, de relaxation superparamagnetique et de magnetoresistance, les evolutions structurales produites par l'irradiation ionique. Nous etablirons des modeles qui nous aideront a interpreter les resultats pour une serie des multicouches qui couvrent un large eventail de differents comportements magnetiques et ceci en fonction de l'epaisseur de la couche magnetique de Co. Nous verrons que dans ces systemes les effets de l'irradiation ionique sont fortement influences par l'energie de surface ainsi que par l'enthalpie de formation, largement positive pour le systeme Co/Ag.

Multi-Objectivising Combinatorial Optimisation Problems by Means of Elementary Landscape Decompositions.

PubMed

Ceberio, Josu; Calvo, Borja; Mendiburu, Alexander; Lozano, Jose A

2018-02-15

In the last decade, many works in combinatorial optimisation have shown that, due to the advances in multi-objective optimisation, the algorithms from this field could be used for solving single-objective problems as well. In this sense, a number of papers have proposed multi-objectivising single-objective problems in order to use multi-objective algorithms in their optimisation. In this article, we follow up this idea by presenting a methodology for multi-objectivising combinatorial optimisation problems based on elementary landscape decompositions of their objective function. Under this framework, each of the elementary landscapes obtained from the decomposition is considered as an independent objective function to optimise. In order to illustrate this general methodology, we consider four problems from different domains: the quadratic assignment problem and the linear ordering problem (permutation domain), the 0-1 unconstrained quadratic optimisation problem (binary domain), and the frequency assignment problem (integer domain). We implemented two widely known multi-objective algorithms, NSGA-II and SPEA2, and compared their performance with that of a single-objective GA. The experiments conducted on a large benchmark of instances of the four problems show that the multi-objective algorithms clearly outperform the single-objective approaches. Furthermore, a discussion on the results suggests that the multi-objective space generated by this decomposition enhances the exploration ability, thus permitting NSGA-II and SPEA2 to obtain better results in the majority of the tested instances.

Microwave-assisted synthesis and electrochemical evaluation of VO 2 (B) nanostructures

DOE PAGES

Ashton, Thomas E.; Borras, David Hevia; Iadecola, Antonella; ...

2015-12-01

Understanding how intercalation materials change during electrochemical operation is paramount to optimising their behaviour and function and in situ characterisation methods allow us to observe these changes without sample destruction. Here, we first report the improved intercalation properties of bronze phase vanadium dioxide VO2 (B) prepared by a microwave assisted route which exhibits a larger electrochemical capacity (232 mAh g -1) compared to VO 2 (B) prepared by a solvothermal route (197 mAh g -1). These electrochemical differences have also been followed using in situ X-ray absorption spectroscopy allowing us to follow oxidation state changes as they occur during batterymore » operation.« less

Fallback options for airgap sensor fault of an electromagnetic suspension system

NASA Astrophysics Data System (ADS)

Michail, Konstantinos; Zolotas, Argyrios C.; Goodall, Roger M.

2013-06-01

The paper presents a method to recover the performance of an electromagnetic suspension under faulty airgap sensor. The proposed control scheme is a combination of classical control loops, a Kalman Estimator and analytical redundancy (for the airgap signal). In this way redundant airgap sensors are not essential for reliable operation of this system. When the airgap sensor fails the required signal is recovered using a combination of a Kalman estimator and analytical redundancy. The performance of the suspension is optimised using genetic algorithms and some preliminary robustness issues to load and operating airgap variations are discussed. Simulations on a realistic model of such type of suspension illustrate the efficacy of the proposed sensor tolerant control method.

Rosetta mission status: challenges of flying near a comet

NASA Astrophysics Data System (ADS)

Martin, P.; Taylor, M.; Kueppers, M.; O'Rourke, L.; Lodiot, S.

2015-10-01

Recent operational events, most likely due to the increased presence of dust near the spacecraft during close flybys of C67P/Churyumov-Gerasimenko in the comet escort phase, have led to a redefinition of the Rosetta mission through the design of new trajectories allowing the spacecraft and its payload to continue flying safely around the comet while augmenting the wealth of scientific data and results that has characterized the beginning of the mission so far. A decision process is being put in place in view of finding the best ways forward operationally so as to recover some capabilities that will allow Rosetta to continue optimising its scientific mission, in both the nominal and expected extended mission intervals.

Experimentally validated finite element model of electrocaloric multilayer ceramic structures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, N. A. S., E-mail: nadia.smith@npl.co.uk, E-mail: maciej.rokosz@npl.co.uk, E-mail: tatiana.correia@npl.co.uk; Correia, T. M., E-mail: nadia.smith@npl.co.uk, E-mail: maciej.rokosz@npl.co.uk, E-mail: tatiana.correia@npl.co.uk; Rokosz, M. K., E-mail: nadia.smith@npl.co.uk, E-mail: maciej.rokosz@npl.co.uk, E-mail: tatiana.correia@npl.co.uk

2014-07-28

A novel finite element model to simulate the electrocaloric response of a multilayer ceramic capacitor (MLCC) under real environment and operational conditions has been developed. The two-dimensional transient conductive heat transfer model presented includes the electrocaloric effect as a source term, as well as accounting for radiative and convective effects. The model has been validated with experimental data obtained from the direct imaging of MLCC transient temperature variation under application of an electric field. The good agreement between simulated and experimental data, suggests that the novel experimental direct measurement methodology and the finite element model could be used to supportmore » the design of optimised electrocaloric units and operating conditions.« less

Fiabilité des structures mécaniques adaptatives: effet de la panne des actionneurs ou des capteurs sur la stabilité

NASA Astrophysics Data System (ADS)

Fall, H.; Charon, W.; Kouta, R.

2002-12-01

Ces dernières décennies, des activités significatives dans le monde étaient dirigées autour du contrôle actif. Le but de ces recherches était essentiellement d'améliorer les performances, la fiabilité et la sécurité des systèmes. Notamment dans le cas des structures soumises à des vibrations aléatoires. D'importants travaux ont été consacré à l'utilisation des “matériaux intelligents” comme capteurs et actionneurs. Cette article propose l'analyse de la fiabilité des systèmes mécaniques en étudiant les pannes des actionneurs ou des capteurs. L'effet de ces pannes sur la stabilité et la performance du système y est démontré. Les méthodologies de conception y sont rappelées. Des exemples numériques sont fournis à travers le contrôle d'un panneau sous chargement dynamique pour illustrer la méthode proposée.

Optimising ICT Effectiveness in Instruction and Learning: Multilevel Transformation Theory and a Pilot Project in Secondary Education

ERIC Educational Resources Information Center

Mooij, Ton

2004-01-01

Specific combinations of educational and ICT conditions including computer use may optimise learning processes, particularly for learners at risk. This position paper asks which curricular, instructional, and ICT characteristics can be expected to optimise learning processes and outcomes, and how to best achieve this optimization. A theoretical…

Diethylstilbestrol-Induced Mouse Hypospadias: “Window of Susceptibility”

PubMed Central

Sinclair, Adriane Watkins; Cao, Mei; Baskin, Laurence; Cunha, Gerald R.

2016-01-01

Hypospadias, an abnormality affecting the penile urethra, is one of the most prevalent congenital malformations afflicting human males. The morphology of hypospadias is markedly different in humans versus mice reflecting substantial differences in penile development in humans and mice. Estrogens such as diethylstilbestrol (DES) elicit mouse penile malformations, but the types of penile abnormalities differ depending on whether DES treatment is prenatal or neonatal. To define the actual “window of susceptibility” to the adverse effects of DES, pregnant mice and their neonatal pups were injected subcutaneously with 200ng/gbw DES every other day from embryonic day 12 to 18 (DES E12-E18), postnatal day 0 to 10 (DES P0-P10), embryonic day 12 to postnatal day 10 (DES E12 to P10), postnatal day 5 to 15 (DES P5 to P15), and postnatal day 10 to 20 (DES P10 to P20). Aged-matched controls received sesame oil vehicle. After euthanasia at 10, 15, 20 and 60 days, penises were analyzed by gross morphology, histology and morphometry. Penises of all 5 groups of DES-treated mice were reduced in size, which was confirmed by morphometric analysis of internal penile structures. The most profound effects were seen in the DES E12-P10, DES P0-P10, and DES P5-P15 groups, thus defining a DES “programming window”. For all parameters, DES treatment from P10-P20 showed the most mild of effects. Adverse effects of DES on the MUMP cartilage and erectile bodies observed shortly after the last DES injection reverted to normality in the DES P5-P15, but not in the E12-P10 and P0-P10 groups, in which MUMP cartilage and erectile body malformations persisted into adulthood, again emphasizing a “window of susceptibility” in the early neonatal period. PMID:26810244

La manucure et la pédicure dans la ville de Ouagadougou (Burkina Faso): pratiques et risqué

PubMed Central

Korsaga-Somé, Nina; Andonaba, Jean Baptiste; Ouédraogo, Muriel Sidnoma; Tapsoba, Gilbert Patrice; Ilboudo, Léopold; Savadogo, Cérina; Barro-Traoré, Fatou; Niamba, Pascal; Traoré, Adama

2016-01-01

La manucure-pédicure est l'ensemble des soins esthétiques des mains, des pieds et des ongles. Au Burkina Faso, l'usage des produits de manucure-pédicure, les techniques utilisées ainsi que les risques encourus restent méconnus. L'objectif de notre étude était d’évaluer la pratique de la manucure-pédicure dans la ville de Ouagadougou. Nous avons mené une étude transversale descriptive de décembre 2010 à novembre 2012 incluant tout les praticiens ayant au moins six mois d'expérience dans l'activité et les clients présents sur les lieux au moment de l'enquête. Nous avons interrogé au total 313 praticiens et 313 clients. L’âge moyen des praticiens était de 19 ans et celui des clients de 32,2 ans. Les praticiens fixes étaient en majorité des femmes (96,87%), ceux mobiles surtout des hommes (68,37%), et 64,53% des clients étaient des femmes. Le pourcentage de praticiens n'ayant pas reçu de formation professionnelle était de 93,92%. 29,7% des praticiens faisaient tremper les instruments pendant au moins dix minutes dans de l'eau de javel; 75,71% savaient que l'utilisation de certains outils étaient dangereux et 26,51% étaient avaient présenté des effets secondaires. Parmi les clients, 40,25% savaient que le matériel utilisé comportait des risques et 30,35% avaient été victimes d'accidents. Les soins de manucure et de pédicure se font dans les salons de coiffure par des coiffeuses non formées à l'exercice de la profession La provenance et la composition des produits n'est pas connues. Des produits non recommandés sont utilisés (shampooing pour trempage des pieds, lame de rasoir et ciseaux pour raclage des pieds). Le recours à la manucure et/ou pédicure est parfois nécessaire mais cela ne doit pas faire perdre de vue les risques encourus. Une sensibilisation des clients et une formation des praticiens semblent nécessaires pour minimiser les risques. PMID:27642448

La prise en charge des troubles de santé mentale par les omnipraticiens du Québec

PubMed Central

Fleury, Marie-Josée; Farand, Lambert; Aubé, Denise; Imboua, Armelle

2012-01-01

Résumé Objectif Cette recherche vise à documenter la prise en charge des troubles mentaux (TM) par les omnipraticiens. Type d’étude Il s’agit d’une étude mixte intégrant un questionnaire auto-administré et des entrevues qualitatives. La banque de données administratives des actes médicaux de la Régie de l’assurance maladie du Québec a aussi été analysée. Contexte La province de Québec. Participants Un total de 1415 omnipraticiens de différents lieux de pratiques ont été sollicités pour le questionnaire; 970 ont été rejoints. Un sous-groupe de 60 omnipraticiens a été rejoint pour les entrevues. Principaux paramètres à l'étude La prévalence annuelle des consultations reliées à des TM courants (TMC) ou graves (TMG), les pratiques cliniques, les pratiques de collaboration, les facteurs facilitant ou entravant la prise en charge des TM, ainsi que les recommandations pour l’amélioration du système de soins. Résultats Le taux de réponse a été de 41% (n = 398 omnipraticiens) pour le questionnaire et de 63% (n = 60) pour les entrevues. Environ 25 % des visites chez les omnipraticiens sont associées à des TM. Presque tous les omnipraticiens prennent en charge des TMC et se sentent compétents pour le faire, à l’inverse de la situation retrouvée pour les TMG. Près de 20 % des TMC sont référés (principalement à des intervenants psychosociaux), alors que près de 75 % des TMG sont référés (surtout en psychiatrie et à l’urgence). Plus de 50 % des omnipraticiens affirment n’entretenir aucun contact avec l’une ou l’autre des ressources de santé mentale. Plusieurs facteurs influencent la prise en charge des TM: les profils des patients (complexité des TM, troubles concomitants); les caractéristiques des omnipraticiens (réseau informel, formation); la culture professionnelle (travail en silo, mécanismes cliniques formalisés); le milieu institutionnel (multidisciplinarité, salariat); l’organisation des services (ressources; coordination formalisée) et l’environnement (politiques). Conclusion Le rôle clé des omnipraticiens et leur soutien à la prise en charge des TM ont été démontrés, spécifiquement pour les TMC. Pour une prise en charge optimale des soins primaires de santé mentale, des stratégies à composantes multiples, dont les soins partagés, devraient être davantage déployées.

A novel textile characterisation approach using an embedded sensor system and segmented textile manipulation

NASA Astrophysics Data System (ADS)

Fial, Julian; Carosella, Stefan; Langheinz, Mario; Wiest, Patrick; Middendorf, Peter

2018-05-01

This paper investigates the application of sensors on carbon fibre textiles for the purpose of textile characterisation and draping process optimisation. The objective is to analyse a textile's condition during the draping operation and actively manipulate boundary conditions in order to create better preform qualities. Various realisations of textile integrated sensors are presented, focusing on the measurement of textile strain. Furthermore, a complex textile characterisation approach is presented where these sensors shall be implemented in.

Instrumental biosensors: new perspectives for the analysis of biomolecular interactions.

PubMed

Nice, E C; Catimel, B

1999-04-01

The use of instrumental biosensors in basic research to measure biomolecular interactions in real time is increasing exponentially. Applications include protein-protein, protein-peptide, DNA-protein, DNA-DNA, and lipid-protein interactions. Such techniques have been applied to, for example, antibody-antigen, receptor-ligand, signal transduction, and nuclear receptor studies. This review outlines the principles of two of the most commonly used instruments and highlights specific operating parameters that will assist in optimising experimental design, data generation, and analysis.

Social Sciences Support to Military Personnel Engaged in Counter-Insurgency and Counter-Terrorism Operations (Soutien en sciences sociales apporte au personnel militaire engage dans des operations de contre-insurrection et de contre-terrorisme)

DTIC Science & Technology

2011-11-01

Aleksanin, M.D., Ph.D., Director of the Nikiforov Russian Centre of Emergency and Radiation Medicine: Dr. Aleksanin has worked as a therapist and served as a...four components of being combat ready: psychological health, physical health, combat skills and physical training. The combat potential of the...clear that participation in armed conflict affects mental and physical health adversely. Studies have shown that certain personality changes take

Reliability of clinical impact grading by healthcare professionals of common prescribing error and optimisation cases in critical care patients.

PubMed

Bourne, Richard S; Shulman, Rob; Tomlin, Mark; Borthwick, Mark; Berry, Will; Mills, Gary H

2017-04-01

To identify between and within profession-rater reliability of clinical impact grading for common critical care prescribing error and optimisation cases. To identify representative clinical impact grades for each individual case. Electronic questionnaire. 5 UK NHS Trusts. 30 Critical care healthcare professionals (doctors, pharmacists and nurses). Participants graded severity of clinical impact (5-point categorical scale) of 50 error and 55 optimisation cases. Case between and within profession-rater reliability and modal clinical impact grading. Between and within profession rater reliability analysis used linear mixed model and intraclass correlation, respectively. The majority of error and optimisation cases (both 76%) had a modal clinical severity grade of moderate or higher. Error cases: doctors graded clinical impact significantly lower than pharmacists (-0.25; P < 0.001) and nurses (-0.53; P < 0.001), with nurses significantly higher than pharmacists (0.28; P < 0.001). Optimisation cases: doctors graded clinical impact significantly lower than nurses and pharmacists (-0.39 and -0.5; P < 0.001, respectively). Within profession reliability grading was excellent for pharmacists (0.88 and 0.89; P < 0.001) and doctors (0.79 and 0.83; P < 0.001) but only fair to good for nurses (0.43 and 0.74; P < 0.001), for optimisation and error cases, respectively. Representative clinical impact grades for over 100 common prescribing error and optimisation cases are reported for potential clinical practice and research application. The between professional variability highlights the importance of multidisciplinary perspectives in assessment of medication error and optimisation cases in clinical practice and research. © The Author 2017. Published by Oxford University Press in association with the International Society for Quality in Health Care. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com

Optimisation of lateral car dynamics taking into account parameter uncertainties

NASA Astrophysics Data System (ADS)

Busch, Jochen; Bestle, Dieter

2014-02-01

Simulation studies on an active all-wheel-steering car show that disturbance of vehicle parameters have high influence on lateral car dynamics. This motivates the need of robust design against such parameter uncertainties. A specific parametrisation is established combining deterministic, velocity-dependent steering control parameters with partly uncertain, velocity-independent vehicle parameters for simultaneous use in a numerical optimisation process. Model-based objectives are formulated and summarised in a multi-objective optimisation problem where especially the lateral steady-state behaviour is improved by an adaption strategy based on measurable uncertainties. The normally distributed uncertainties are generated by optimal Latin hypercube sampling and a response surface based strategy helps to cut down time consuming model evaluations which offers the possibility to use a genetic optimisation algorithm. Optimisation results are discussed in different criterion spaces and the achieved improvements confirm the validity of the proposed procedure.

Distributed optimisation problem with communication delay and external disturbance

NASA Astrophysics Data System (ADS)

Tran, Ngoc-Tu; Xiao, Jiang-Wen; Wang, Yan-Wu; Yang, Wu

2017-12-01

This paper investigates the distributed optimisation problem for the multi-agent systems (MASs) with the simultaneous presence of external disturbance and the communication delay. To solve this problem, a two-step design scheme is introduced. In the first step, based on the internal model principle, the internal model term is constructed to compensate the disturbance asymptotically. In the second step, a distributed optimisation algorithm is designed to solve the distributed optimisation problem based on the MASs with the simultaneous presence of disturbance and communication delay. Moreover, in the proposed algorithm, each agent interacts with its neighbours through the connected topology and the delay occurs during the information exchange. By utilising Lyapunov-Krasovskii functional, the delay-dependent conditions are derived for both slowly and fast time-varying delay, respectively, to ensure the convergence of the algorithm to the optimal solution of the optimisation problem. Several numerical simulation examples are provided to illustrate the effectiveness of the theoretical results.

An effective pseudospectral method for constraint dynamic optimisation problems with characteristic times

NASA Astrophysics Data System (ADS)

Xiao, Long; Liu, Xinggao; Ma, Liang; Zhang, Zeyin

2018-03-01

Dynamic optimisation problem with characteristic times, widely existing in many areas, is one of the frontiers and hotspots of dynamic optimisation researches. This paper considers a class of dynamic optimisation problems with constraints that depend on the interior points either fixed or variable, where a novel direct pseudospectral method using Legendre-Gauss (LG) collocation points for solving these problems is presented. The formula for the state at the terminal time of each subdomain is derived, which results in a linear combination of the state at the LG points in the subdomains so as to avoid the complex nonlinear integral. The sensitivities of the state at the collocation points with respect to the variable characteristic times are derived to improve the efficiency of the method. Three well-known characteristic time dynamic optimisation problems are solved and compared in detail among the reported literature methods. The research results show the effectiveness of the proposed method.

Medicines optimisation: priorities and challenges.

PubMed

Kaufman, Gerri

2016-03-23

Medicines optimisation is promoted in a guideline published in 2015 by the National Institute for Health and Care Excellence. Four guiding principles underpin medicines optimisation: aim to understand the patient's experience; ensure evidence-based choice of medicines; ensure medicines use is as safe as possible; and make medicines optimisation part of routine practice. Understanding the patient experience is important to improve adherence to medication regimens. This involves communication, shared decision making and respect for patient preferences. Evidence-based choice of medicines is important for clinical and cost effectiveness. Systems and processes for the reporting of medicines-related safety incidents have to be improved if medicines use is to be as safe as possible. Ensuring safe practice in medicines use when patients are transferred between organisations, and managing the complexities of polypharmacy are imperative. A medicines use review can help to ensure that medicines optimisation forms part of routine practice.

Effets de la formation sur la violence conjugale

PubMed Central

Zaher, Eman; Keogh, Kelly; Ratnapalan, Savithiri

2014-01-01

Résumé Objectif Décrire et évaluer l’efficacité de la formation concernant la violence conjugale pour améliorer les connaissances et permettre la reconnaissance et la prise en charge par les médecins des femmes victimes de violence. Sources des données On a fait une recension dans la base de données des révisions systématiques de Cochrane, MEDLINE, PubMed, PsycINFO, ERIC et EMBASE pour trouver des articles publiés entre le 1e janvier 2000 et le 1e novembre 2012. Des recherches manuelles ont complété cette recension pour cerner des articles pertinents à l’aide d’une stratégie de recherche combinant des textes, mots et expressions MeSH. Sélection des études On a choisi des études randomisées contrôlées qui portaient sur des interventions éducatives à l’intention des médecins et fournissaient des données sur les effets des interventions. Synthèse On a inclus 9 études randomisées contrôlées qui décrivaient différentes approches pédagogiques et diverses mesures des résultats. Trois études examinaient les effets d’interventions éducatives pour des médecins en formation postdoctorale et ont constaté une augmentation des connaissances, mais il n’y a eu aucun changement dans le comportement en ce qui a trait à l’identification des victimes de violence conjugale. Six études portaient sur des interventions éducatives pour des médecins en pratique active. Trois d’entre elles utilisaient une approche à multiples facettes pour les médecins, qui combinait une formation ainsi que des interventions de soutien de la part du système pour changer les comportements des médecins, comme une sensibilisation générale accrue à la violence conjugale au moyen de brochures et d’affiches, des aide-mémoire pour rappeler aux médecins comment identifier les victimes, des moyens pour faciliter l’accès des médecins à des services de soutien pour les victimes, la réalisation d’audits et la fourniture de rétroaction. Les interventions éducatives à multiples facettes prenaient la forme d’ateliers interactifs, d’apprentissage sur le web et de formation expérientielle. Une autre étude utilisait des discussions de groupes témoins et de la formation et a permis de constater une amélioration dans le signalement de la violence conjugale par les médecins. Les 2 autres études ont relevé une meilleure perception par les médecins en pratique de leur confiance en eux à l’aide d’apprentissage par problèmes en ligne. Conclusion Il a été difficile de déterminer quelle stratégie pédagogique était la plus efficace étant donné que les interventions éducatives et les mesures des résultats variaient entre les études choisies. De brèves interventions pour les médecins en formation postdoctorale amélioraient les connaissances mais ne semblaient pas influencer les comportements. La formation en ligne sous forme d’apprentissage par problèmes améliorait les perceptions des médecins en pratique, leurs connaissances et leurs habiletés quant à la prise en charge de la violence conjugale. La formation des médecins combinée à des interventions de soutien de la part du système semblait bénéfique aux victimes de violence conjugale et augmentait le nombre de demandes de consultations auprès des ressources de soutien à leur intention.

La prévention de l’étouffement et de la suffocation chez les enfants

PubMed Central

Cyr, Claude

2012-01-01

RÉSUMÉ L’étouffement, la suffocation et la strangulation sont responsables de graves blessures non intentionnelles chez les enfants et constituent des causes importantes de décès non intentionnels chez les nourrissons et les tout-petits. Presque la totalité des décès et des blessures attribuables à un étouffement, une suffocation ou une strangulation sont évitables. Le présent document de principes traite des définitions, de l’épidémiologie et des stratégies de prévention efficaces de ces blessures. Des recommandations qui combinent des démarches pour améliorer la sécurité, incluant des recherches, de la surveillance, des lois et des normes, la conception des produits et l’éducation, sont présentées. Les dispensateurs de soins pédiatriques devraient encourager les parents et autres personnes qui s’occupent d’enfants à apprendre la réanimation cardiorespiratoire (RCR) et les premiers soins en cas d’étouffement, et leur offrir des conseils préventifs adaptés à l’âge de leur enfant lors des bilans de santé réguliers afin de prévenir ces blessures.

Rubbery computing

NASA Astrophysics Data System (ADS)

Wilson, Katherine E.; Henke, E.-F. Markus; Slipher, Geoffrey A.; Anderson, Iain A.

2017-04-01

Electromechanically coupled dielectric elastomer actuators (DEAs) and dielectric elastomer switches (DESs) may form digital logic circuitry made entirely of soft and flexible materials. The expansion in planar area of a DEA exerts force across a DES, which is a soft electrode with strain-dependent resistivity. When compressed, the DES drops steeply in resistance and changes state from non-conducting to conducting. Logic operators may be achieved with different arrangements of interacting DE actuators and switches. We demonstrate combinatorial logic elements, including the fundamental Boolean logic gates, as well as sequential logic elements, including latches and flip-flops. With both data storage and signal processing abilities, the necessary calculating components of a soft computer are available. A noteworthy advantage of a soft computer with mechanosensitive DESs is the potential for responding to environmental strains while locally processing information and generating a reaction, like a muscle reflex.

Implementation Cryptography Data Encryption Standard (DES) and Triple Data Encryption Standard (3DES) Method in Communication System Based Near Field Communication (NFC)

NASA Astrophysics Data System (ADS)

Ratnadewi; Pramono Adhie, Roy; Hutama, Yonatan; Saleh Ahmar, A.; Setiawan, M. I.

2018-01-01

Cryptography is a method used to create secure communication by manipulating sent messages during the communication occurred so only intended party that can know the content of that messages. Some of the most commonly used cryptography methods to protect sent messages, especially in the form of text, are DES and 3DES cryptography method. This research will explain the DES and 3DES cryptography method and its use for stored data security in smart cards that working in the NFC-based communication system. Several things that will be explained in this research is the ways of working of DES and 3DES cryptography method in doing the protection process of a data and software engineering through the creation of application using C++ programming language to realize and test the performance of DES and 3DES cryptography method in encrypted data writing process to smart cards and decrypted data reading process from smart cards. The execution time of the entering and the reading process data using a smart card DES cryptography method is faster than using 3DES cryptography.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vickery, A.; Niels Bohr Institute, University of Copenhagen, Universitetsparken 5, DK-2100 Copenhagen; Deen, P. P.

In recent years the use of repetition rate multiplication (RRM) on direct geometry neutron spectrometers has been established and is the common mode of operation on a growing number of instruments. However, the chopper configurations are not ideally optimised for RRM with a resultant 100 fold flux difference across a broad wavelength band. This paper presents chopper configurations that will produce a relative constant (RC) energy resolution and a relative variable (RV) energy resolution for optimised use of RRM. The RC configuration provides an almost uniform ΔE/E for all incident wavelengths and enables an efficient use of time as themore » entire dynamic range is probed with equivalent statistics, ideal for single shot measurements of transient phenomena. The RV energy configuration provides an almost uniform opening time at the sample for all incident wavelengths with three orders of magnitude in time resolution probed for a single European Spallation Source (ESS) period, which is ideal to probe complex relaxational behaviour. These two chopper configurations have been simulated for the Versatile Optimal Resolution direct geometry spectrometer, VOR, that will be built at ESS.« less

Numerical Optimisation in Non Reacting Conditions of the Injector Geometry for a Continuous Detonation Wave Rocket Engine

NASA Astrophysics Data System (ADS)

Gaillard, T.; Davidenko, D.; Dupoirieux, F.

2015-06-01

The paper presents the methodology and the results of a numerical study, which is aimed at the investigation and optimisation of different means of fuel and oxidizer injection adapted to rocket engines operating in the rotating detonation mode. As the simulations are achieved at the local scale of a single injection element, only one periodic pattern of the whole geometry can be calculated so that the travelling detonation waves and the associated chemical reactions can not be taken into account. Here, separate injection of fuel and oxidizer is considered because premixed injection is handicapped by the risk of upstream propagation of the detonation wave. Different associations of geometrical periodicity and symmetry are investigated for the injection elements distributed over the injector head. To analyse the injection and mixing processes, a nonreacting 3D flow is simulated using the LES approach. Performance of the studied configurations is analysed using the results on instantaneous and mean flowfields as well as by comparing the mixing efficiency and the total pressure recovery evaluated for different configurations.

Applying e-procurement system in the healthcare: the EPOS paradigm

NASA Astrophysics Data System (ADS)

Ketikidis, Panayiotis H.; Kontogeorgis, Apostolos; Stalidis, George; Kaggelides, Kostis

2010-03-01

One of the goals of procurement is to establish a competitive price, while e-procurement utilises electronic commerce to identify potential sources of supply, to purchase goods and services, to exchange contractual information and to interact with suppliers. Extensive academic work has been extensively devoted to e-procurement in diverse industries. However, applying e-procurement in the healthcare sector remains unexplored. It lacks an efficient e-procurement mechanism that will enable hospitals and healthcare suppliers to electronically exchange contractual information, aided by the technologies of optimisation and business rules. The development and deployment of e-procurement requires a major effort in the coordination of complex interorganisational business process. This article presents an e-procurement optimised system (EPOS) for the healthcare marketplace, a complete methodological approach for deploying and operating such system, as piloted in public and private hospitals in three European countries (Greece, Spain and Belgium) and suppliers of healthcare items in the fourth country (Italy). The efficient e-procurement mechanism that EPOS suggests enables hospitals and pharmaceutical and medical equipment suppliers to electronically exchange contractual information.

Contribution of 3-D time-lapse ERT to the study of leachate recirculation in a landfill

DOE Office of Scientific and Technical Information (OSTI.GOV)

Clement, R., E-mail: remi.clement@hmg.inpg.fr; Grenoble Universite, B.P. 53, 38041 Grenoble Cedex 9; Oxarango, L.

2011-03-15

Leachate recirculation is a key process in the operation of municipal waste landfills as bioreactors. It aims at increasing the moisture content to optimise the biodegradation. Because waste is a very heterogeneous and anisotropic porous media, the geometry of the leachate plume recirculation is difficult to delineate from the surface at the scale of the bioreactor site. In this study, 3-D time-lapse electrical resistivity tomography (ERT) was used to obtain useful information for understanding leachate recirculation hydrodynamics. The ERT inversion methodology and the electrode arrays were optimised using numerical modelling simulating a 3-D leachate injection scenario. Time-lapse ERT was subsequentlymore » applied at the field scale during an experimental injection. We compared ERT images with injected volumes to evaluate the sensitivity of time-lapse ERT to delineate the plume migration. The results show that time-lapse ERT can accomplish the following: (i) accurately locate the injection plume, delineating its depth and lateral extension; (ii) be used to estimate some hydraulic properties of waste.« less

Statistical methods for convergence detection of multi-objective evolutionary algorithms.

PubMed

Trautmann, H; Wagner, T; Naujoks, B; Preuss, M; Mehnen, J

2009-01-01

In this paper, two approaches for estimating the generation in which a multi-objective evolutionary algorithm (MOEA) shows statistically significant signs of convergence are introduced. A set-based perspective is taken where convergence is measured by performance indicators. The proposed techniques fulfill the requirements of proper statistical assessment on the one hand and efficient optimisation for real-world problems on the other hand. The first approach accounts for the stochastic nature of the MOEA by repeating the optimisation runs for increasing generation numbers and analysing the performance indicators using statistical tools. This technique results in a very robust offline procedure. Moreover, an online convergence detection method is introduced as well. This method automatically stops the MOEA when either the variance of the performance indicators falls below a specified threshold or a stagnation of their overall trend is detected. Both methods are analysed and compared for two MOEA and on different classes of benchmark functions. It is shown that the methods successfully operate on all stated problems needing less function evaluations while preserving good approximation quality at the same time.

Multi-Optimisation Consensus Clustering

NASA Astrophysics Data System (ADS)

Li, Jian; Swift, Stephen; Liu, Xiaohui

Ensemble Clustering has been developed to provide an alternative way of obtaining more stable and accurate clustering results. It aims to avoid the biases of individual clustering algorithms. However, it is still a challenge to develop an efficient and robust method for Ensemble Clustering. Based on an existing ensemble clustering method, Consensus Clustering (CC), this paper introduces an advanced Consensus Clustering algorithm called Multi-Optimisation Consensus Clustering (MOCC), which utilises an optimised Agreement Separation criterion and a Multi-Optimisation framework to improve the performance of CC. Fifteen different data sets are used for evaluating the performance of MOCC. The results reveal that MOCC can generate more accurate clustering results than the original CC algorithm.