7 CFR 1001.13 - Producer milk.

Code of Federal Regulations, 2011 CFR

2011-01-01

... and Orders; Milk), DEPARTMENT OF AGRICULTURE MILK IN THE NORTHEAST MARKETING AREA Order Regulating... is picked up from the producer's farm in a tank truck under the control of the operator of a pool... month shall be considered as having been received by the handler during the month in which it is picked...

7 CFR 1001.13 - Producer milk.

Code of Federal Regulations, 2010 CFR

2010-01-01

... and Orders; Milk), DEPARTMENT OF AGRICULTURE MILK IN THE NORTHEAST MARKETING AREA Order Regulating... is picked up from the producer's farm in a tank truck under the control of the operator of a pool... month shall be considered as having been received by the handler during the month in which it is picked...

7 CFR 457.153 - Peach crop insurance provisions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... exists among the policy provisions, the order of priority is as follows: (1) The Catastrophic Risk... for the purpose of picking all or a portion of the crop. Harvest. The picking or removal of mature... and pertinent information that we request in order to establish your approved yield. We will adjust...

29 CFR 780.312 - “Hand harvest laborer” defined.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) Employees who hand pick small undesirable fruit prior to harvesting in order to insure a better crop would..., such as a “blueberry picking tool.” “Hand-harvesting” refers only to soil-grown crops and does not... almost simultaneously with the picking and before transportation to the concentration point on the farm...

29 CFR 780.312 - “Hand harvest laborer” defined.

Code of Federal Regulations, 2011 CFR

2011-07-01

...) Employees who hand pick small undesirable fruit prior to harvesting in order to insure a better crop would..., such as a “blueberry picking tool.” “Hand-harvesting” refers only to soil-grown crops and does not... almost simultaneously with the picking and before transportation to the concentration point on the farm...

A multi-stage heuristic algorithm for matching problem in the modified miniload automated storage and retrieval system of e-commerce

NASA Astrophysics Data System (ADS)

Wang, Wenrui; Wu, Yaohua; Wu, Yingying

2016-05-01

E-commerce, as an emerging marketing mode, has attracted more and more attention and gradually changed the way of our life. However, the existing layout of distribution centers can't fulfill the storage and picking demands of e-commerce sufficiently. In this paper, a modified miniload automated storage/retrieval system is designed to fit these new characteristics of e-commerce in logistics. Meanwhile, a matching problem, concerning with the improvement of picking efficiency in new system, is studied in this paper. The problem is how to reduce the travelling distance of totes between aisles and picking stations. A multi-stage heuristic algorithm is proposed based on statement and model of this problem. The main idea of this algorithm is, with some heuristic strategies based on similarity coefficients, minimizing the transportations of items which can not arrive in the destination picking stations just through direct conveyors. The experimental results based on the cases generated by computers show that the average reduced rate of indirect transport times can reach 14.36% with the application of multi-stage heuristic algorithm. For the cases from a real e-commerce distribution center, the order processing time can be reduced from 11.20 h to 10.06 h with the help of the modified system and the proposed algorithm. In summary, this research proposed a modified system and a multi-stage heuristic algorithm that can reduce the travelling distance of totes effectively and improve the whole performance of e-commerce distribution center.

Hierarchical planning for a surface mounting machine placement.

PubMed

Zeng, You-jiao; Ma, Deng-ze; Jin, Ye; Yan, Jun-qi

2004-11-01

For a surface mounting machine (SMM) in printed circuit board (PCB) assembly line, there are four problems, e.g. CAD data conversion, nozzle selection, feeder assignment and placement sequence determination. A hierarchical planning for them to maximize the throughput rate of an SMM is presented here. To minimize set-up time, a CAD data conversion system was first applied that could automatically generate the data for machine placement from CAD design data files. Then an effective nozzle selection approach implemented to minimize the time of nozzle changing. And then, to minimize picking time, an algorithm for feeder assignment was used to make picking multiple components simultaneously as much as possible. Finally, in order to shorten pick-and-place time, a heuristic algorithm was used to determine optimal component placement sequence according to the decided feeder positions. Experiments were conducted on a four head SMM. The experimental results were used to analyse the assembly line performance.

Variation in clinical coding lists in UK general practice: a barrier to consistent data entry?

PubMed

Tai, Tracy Waize; Anandarajah, Sobanna; Dhoul, Neil; de Lusignan, Simon

2007-01-01

Routinely collected general practice computer data are used for quality improvement; poor data quality including inconsistent coding can reduce their usefulness. To document the diversity of data entry systems currently in use in UK general practice and highlight possible implications for data quality. General practice volunteers provided screen shots of the clinical coding screen they would use to code a diagnosis or problem title in the clinical consultation. The six clinical conditions examined were: depression, cystitis, type 2 diabetes mellitus, sore throat, tired all the time, and myocardial infarction. We looked at the picking lists generated for these problem titles in EMIS, IPS, GPASS and iSOFT general practice clinical computer systems, using the Triset browser as a gold standard for comparison. A mean of 19.3 codes is offered in the picking list after entering a diagnosis or problem title. EMIS produced the longest picking lists and GPASS the shortest, with a mean number of choices of 35.2 and 12.7, respectively. Approximately three-quarters (73.5%) of codes are diagnoses, one-eighth (12.5%) symptom codes, and the remainder come from a range of Read chapters. There was no readily detectable consistent order in which codes were displayed. Velocity coding, whereby commonly-used codes are placed higher in the picking list, results in variation between practices even where they have the same brand of computer system. Current systems for clinical coding promote diversity rather than consistency of clinical coding. As the UK moves towards an integrated health IT system consistency of coding will become more important. A standardised, limited list of codes for primary care might help address this need.

The Anti-Resonance Criterion in Selecting Pick Systems for Fully Operational Cutting Machinery Used in Mining

NASA Astrophysics Data System (ADS)

Cheluszka, Piotr

2017-12-01

This article discusses the issue of selecting a pick system for cutting mining machinery, concerning the reduction of vibrations in the cutting system, particularly in a load-carrying structure at work. Numerical analysis was performed on a telescopic roadheader boom equipped with transverse heads. A frequency range of the boom's free vibrations with a set structure and dynamic properties were determined based on a dynamic model. The main components excited by boom vibrations, generated through the process of cutting rock, were identified. This was closely associated with the stereometry of the cutting heads. The impact on the pick system (the number of picks and their arrangement along the side of the cutting head) was determined by the intensity of the external boom load elements, especially in resonance zones. In terms of the anti-resonance criterion, an advantageous system of cutting head picks was determined as a result of the analysis undertaken. The correct selection of the pick system was ascertained based on a computer simulation of the dynamic loads and vibrations of a roadheader telescopic boom.

Order Batching in Warehouses by Minimizing Total Tardiness: A Hybrid Approach of Weighted Association Rule Mining and Genetic Algorithms

PubMed Central

Taheri, Shahrooz; Mat Saman, Muhamad Zameri; Wong, Kuan Yew

2013-01-01

One of the cost-intensive issues in managing warehouses is the order picking problem which deals with the retrieval of items from their storage locations in order to meet customer requests. Many solution approaches have been proposed in order to minimize traveling distance in the process of order picking. However, in practice, customer orders have to be completed by certain due dates in order to avoid tardiness which is neglected in most of the related scientific papers. Consequently, we proposed a novel solution approach in order to minimize tardiness which consists of four phases. First of all, weighted association rule mining has been used to calculate associations between orders with respect to their due date. Next, a batching model based on binary integer programming has been formulated to maximize the associations between orders within each batch. Subsequently, the order picking phase will come up which used a Genetic Algorithm integrated with the Traveling Salesman Problem in order to identify the most suitable travel path. Finally, the Genetic Algorithm has been applied for sequencing the constructed batches in order to minimize tardiness. Illustrative examples and comparisons are presented to demonstrate the proficiency and solution quality of the proposed approach. PMID:23864823

Order batching in warehouses by minimizing total tardiness: a hybrid approach of weighted association rule mining and genetic algorithms.

PubMed

Azadnia, Amir Hossein; Taheri, Shahrooz; Ghadimi, Pezhman; Saman, Muhamad Zameri Mat; Wong, Kuan Yew

2013-01-01

One of the cost-intensive issues in managing warehouses is the order picking problem which deals with the retrieval of items from their storage locations in order to meet customer requests. Many solution approaches have been proposed in order to minimize traveling distance in the process of order picking. However, in practice, customer orders have to be completed by certain due dates in order to avoid tardiness which is neglected in most of the related scientific papers. Consequently, we proposed a novel solution approach in order to minimize tardiness which consists of four phases. First of all, weighted association rule mining has been used to calculate associations between orders with respect to their due date. Next, a batching model based on binary integer programming has been formulated to maximize the associations between orders within each batch. Subsequently, the order picking phase will come up which used a Genetic Algorithm integrated with the Traveling Salesman Problem in order to identify the most suitable travel path. Finally, the Genetic Algorithm has been applied for sequencing the constructed batches in order to minimize tardiness. Illustrative examples and comparisons are presented to demonstrate the proficiency and solution quality of the proposed approach.

Automatic Recognition Of Moving Objects And Its Application To A Robot For Picking Asparagus

NASA Astrophysics Data System (ADS)

Baylou, P.; Amor, B. El Hadj; Bousseau, G.

1983-10-01

After a brief description of the robot for picking white asparagus, a statistical study of the different shapes of asparagus tips allowed us to determine certain discriminating parameters to detect the tips as they appear on the silhouette of the mound of earth. The localisation was done stereometrically with the help of two cameras. As the robot carrying the system of vision-localisation moves, the images are altered and decision cri-teria modified. A study of the image from mobile objects produced by both tube and CCD came-ras was carried out. A simulation of this phenomenon has been achieved in order to determine the modifications concerning object shapes, thresholding levels and decision parameters in function of the robot speed.

Pick a Number ... Any Number?

ERIC Educational Resources Information Center

Simons, Jacob V., Jr.; Price, Barbara A.

2005-01-01

A recent classroom revelation caused us to reconsider the adequacy of the instructions offered in our textbooks for one of our most elementary quantitative methods. Specifically, we found that many students were mystified concerning how to pick an initial objective function value when plotting an isoprofit line in order to graphically solve a…

Pick_sw: a program for interactive picking of S-wave data, version 2.00

USGS Publications Warehouse

Ellefsen, Karl J.

2002-01-01

Program pick_sw is used to interactively pick travel times from S-wave data. It is assumed that the data are collected using 2 shots of opposite polarity at each shot location. The traces must be in either the SEG-2 format or the SU format. The program is written in the IDL and C programming languages, and the program is executed under the Windows operating system. (The program may also execute under other operating systems like UNIX if the C language functions are re-compiled).

Pick disease

MedlinePlus

... Frontotemporal dementia; FTD; Arnold Pick disease; 3R tauopathy Images Central nervous system and peripheral nervous system References Bang J, Spina S, Miller BL. Frontotemporal dementia. Lancet . 2015;386( ...

49 CFR 395.1 - Scope of rules in this part.

Code of Federal Regulations, 2011 CFR

2011-10-01

... to drive a commercial motor vehicle for not more than 2 additional hours in order to complete that... transportation of oilfield equipment, including the stringing and picking up of pipe used in pipelines, and... 150 air-mile radius of where the grapes were picked or distributed; and (4) Is during the harvest...

Nanofork for single cells adhesion measurement via ESEM-nanomanipulator system.

PubMed

Ahmad, Mohd Ridzuan; Nakajima, Masahiro; Kojima, Masaru; Kojima, Seiji; Homma, Michio; Fukuda, Toshio

2012-03-01

In this paper, single cells adhesion force was measured using a nanofork. The nanofork was used to pick up a single cell on a line array substrate inside an environmental scanning electron microscope (ESEM). The line array substrate was used to provide small gaps between the single cells and the substrate. Therefore, the nanofork could be inserted through these gaps in order to successfully pick up a single cell. Adhesion force was measured during the cell pick-up process from the deflection of the cantilever beam. The nanofork was fabricated using focused ion beam (FIB) etching process while the line array substrate was fabricated using nanoimprinting technology. As to investigate the effect of contact area on the strength of the adhesion force, two sizes of gap distance of line array substrate were used, i.e., 1 μm and 2 μm. Results showed that cells attached on the 1 μm gap line array substrate required more force to be released as compared to the cells attached on the 1 μm gap line array substrate.

Automatic P-S phase picking procedure based on Kurtosis: Vanuatu region case study

NASA Astrophysics Data System (ADS)

Baillard, C.; Crawford, W. C.; Ballu, V.; Hibert, C.

2012-12-01

Automatic P and S phase picking is indispensable for large seismological data sets. Robust algorithms, based on short term and long term average ratio comparison (Allen, 1982), are commonly used for event detection, but further improvements can be made in phase identification and picking. We present a picking scheme using consecutively Kurtosis-derived Characteristic Functions (CF) and Eigenvalue decompositions on 3-component seismic data to independently pick P and S arrivals. When computed over a sliding window of the signal, a sudden increase in the CF reveals a transition from a gaussian to a non-gaussian distribution, characterizing the phase onset (Saragiotis, 2002). One advantage of the method is that it requires much fewer adjustable parameters than competing methods. We modified the Kurtosis CF to improve pick precision, by computing the CF over several frequency bandwidths, window sizes and smoothing parameters. Once phases were picked, we determined the onset type (P or S) using polarization parameters (rectilinearity, azimuth and dip) calculated using Eigenvalue decompositions of the covariance matrix (Cichowicz, 1993). Finally, we removed bad picks using a clustering procedure and the signal-to-noise ratio (SNR). The pick quality index was also assigned based on the SNR value. Amplitude calculation is integrated into the procedure to enable automatic magnitude calculation. We applied this procedure to data from a network of 30 wideband seismometers (including 10 oceanic bottom seismometers) in Vanuatu that ran for 10 months from May 2008 to February 2009. We manually picked the first 172 events of June, whose local magnitudes range from 0.7 to 3.7. We made a total of 1601 picks, 1094 P and 507 S. We then applied our automatic picking to the same dataset. 70% of the manually picked onsets were picked automatically. For P-picks, the difference between manual and automatic picks is 0.01 ± 0.08 s overall; for the best quality picks (quality index 0: 64% of the P-picks) the difference is -0.01 ± 0.07 s. For S-picks, the difference is -0.09 ± 0.26 s overall and -0.06 ± 0.14 s for good quality picks (index 1: 26% of the S-picks). Residuals showed no dependence on the event magnitudes. The method independently picks S and P waves with good precision and only a few parameters to adjust for relatively small earthquakes (mostly ≤ 2 Ml). The automatic procedure was then applied to the whole dataset. Earthquake locations obtained by inverting onset arrivals revealed clustering and lineations that helped us to constrain the subduction plane. Those key parameters will be integrated to a 3D finite-difference modeling and compared to GPS data in order to better understand the complex geodynamics behavior of the Vanuatu region.

[Quality indicators in the storage and dispensing process in a Hospital Pharmacy].

PubMed

Rabuñal-Álvarez, M T; Calvin-Lamas, M; Feal-Cortizas, B; Martínez-López, L M; Pedreira-Vázquez, I; Martín-Herranz, M I

2014-01-01

To establish indicators for the evaluation of the quality of the storage and dispensing processes related to semiautomatic vertical (SAVCS) and horizontal (SAHCS) carousel systems. Descriptive observational study conducted between January-December 2012. Definition of quality indicators, a target value is established and an obtained value is calculated for 2012. Five quality indicators in the process of storage and dispensing of drugs were defined and calculated: indicator 1, error filling unidose trolleys: target (<1.67%), obtained (1.03%); indicator 2, filling accuracy unidose trolleys by using an SAVCS: target (<15%), obtained (11.5%); indicator 3, reliability of drug inventory in the process of drug entries using an SAHCS: target (<15%), obtained (6.53%); indicator 4, reliability of drug inventory in the picking process of orders replacement stock of clinical units using an SAHCS: target (<10%), obtained (1.97%); indicator 5, accuracy of the picking process of drug orders using an SAHCS: target (<10%), obtained (10.41%). Establishing indicators has allowed the quality in terms of safety, precision and reliability of semiautomatic systems for storage and dispensing drugs to be assessed. Copyright © 2014 SECA. Published by Elsevier Espana. All rights reserved.

Movement strategy and performance in a high-volume order picking workstation.

PubMed

Könemann, Reinier; Bosch, Tim; de Looze, Michiel

2012-01-01

The design of a work station generally prescribes a global movement pattern of the operator, but also leaving some degrees of freedom regarding movement strategy. For a specific order picking work station, we studied the movement strategies, the underlying factors and its impact on performance. Eight subjects performed a task comprising, the picking and placing of an object and pressing a button in eight conditions varying in product weight, movement direction (left vs. right), and placing distance. Movements were analyzed and cycle times were obtained from video-recordings. We observed various types of strategy regarding hand use and global placing mode (reaching vs. placing). The different strategies did not show clear relationships with performance (in contrast to the various work place factors). Ergonomically spoken, the fact that the workstation allows movement variation without loss of performance, is favorable.

7 CFR 457.128 - Guaranteed production plan of fresh market tomato crop insurance provisions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... policy provisions, the order of priority is as follows: (1) The Catastrophic Risk Protection Endorsement... field for the purpose of picking all or a portion of the crop. First fruit set—The date when 30 percent.... Harvest—Picking of marketable tomatoes. Mature green tomato—A tomato that: (a) Has a heightened gloss due...

7 CFR 457.173 - Florida Avocado crop insurance provisions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... market, and permitting the general public to enter the fields for the purpose of picking all or a portion of the crop. Harvest. Picking of the avocados from the trees or ground by hand or machine. Pound. A... information that we request in order to establish your production guarantee per acre. (d) We will reduce the...

7 CFR 457.131 - Macadamia nut crop insurance provisions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... the orchard for the purpose of picking all or a portion of the crop. Graft. The uniting of a macadamia.... Picking of mature macadamia nuts from the ground. Interplanted. Acreage on which two or more crops are... information that we request in order to establish your approved yield. We will reduce the yield used to...

The adaptive approach for storage assignment by mining data of warehouse management system for distribution centres

NASA Astrophysics Data System (ADS)

Ming-Huang Chiang, David; Lin, Chia-Ping; Chen, Mu-Chen

2011-05-01

Among distribution centre operations, order picking has been reported to be the most labour-intensive activity. Sophisticated storage assignment policies adopted to reduce the travel distance of order picking have been explored in the literature. Unfortunately, previous research has been devoted to locating entire products from scratch. Instead, this study intends to propose an adaptive approach, a Data Mining-based Storage Assignment approach (DMSA), to find the optimal storage assignment for newly delivered products that need to be put away when there is vacant shelf space in a distribution centre. In the DMSA, a new association index (AIX) is developed to evaluate the fitness between the put away products and the unassigned storage locations by applying association rule mining. With AIX, the storage location assignment problem (SLAP) can be formulated and solved as a binary integer programming. To evaluate the performance of DMSA, a real-world order database of a distribution centre is obtained and used to compare the results from DMSA with a random assignment approach. It turns out that DMSA outperforms random assignment as the number of put away products and the proportion of put away products with high turnover rates increase.

Systematic Approaches to Experimentation: The Case of Pick's Theorem

ERIC Educational Resources Information Center

Papadopoulos, Ioannis; Iatridou, Maria

2010-01-01

In this paper two 10th graders having an accumulated experience on problem-solving ancillary to the concept of area confronted the task to find Pick's formula for a lattice polygon's area. The formula was omitted from the theorem in order for the students to read the theorem as a problem to be solved. Their working is examined and emphasis is…

Hyperspectral Imaging and Obstacle Detection for Robotics Navigation

DTIC Science & Technology

2005-09-01

anatomy and diffraction process. 17 3.3 Technical Specifications of the System A. Brimrose AOTF Video Adaptor Specifications: Material TeO2 Active...sampled from glass case on person 2’s belt 530 pixels 20 pick-up white sampled from body panels of pick-up 600 pixels 21 pick-up blue sampled from

Pick's disease: a modern approach.

PubMed

Dickson, D W

1998-04-01

Pick's disease is a rare dementing disorder that is sometimes familial. The cardinal features are circumscribed cortical atrophy most often affecting the frontal and temporal poles and argyrophilic, round intraneuronal inclusions (Pick bodies). Clinical manifestations reflect the distribution of cortical degeneration, and personality deterioration and memory deficits are often more severe than visuospatial and apraxic disorders that are common in Alzheimer's disease, but clinical overlap with other non-Alzheimer degenerative disorders is increasingly recognized. Neuronal loss and degeneration are usually maximal in the limbic system, including hippocampus, entorhinal cortex and amygdala. Numerous Pick bodies are often present in the dentate fascia of the hippocampus. Less specific features include leukoencephalopathy and ballooned cortical neurons (Pick cells). Glial reaction is often pronounced in affected cerebral gray and white matter. Tau-immunoreactive glial inclusions are a recently recognized finding in Pick's disease, and neuritic changes have also recently been described. Variable involvement of the deep gray matter and the brainstem is typical, with a predilection for the monoaminergic nuclei and nuclei of the pontine base. Neurochemical studies demonstrate deficits in intrinsic cortical neurotransmitter systems (e.g., somatostatin), but inconsistent loss of transmitters in systems projecting to the cortex (e.g., cholinergic neurons of the basal nucleus). Biochemical and immunocytochemical studies have demonstrated that abnormal tau proteins are the major structural components of Pick bodies. A specific tau protein immunoblotting pattern different from that seen in Alzheimer's disease and certain other disorders has been suggested in some studies. A specific molecular marker and a genetic locus for familial cases are not known.

49 CFR 375.605 - How must I notify an individual shipper of any service delays?

Code of Federal Regulations, 2011 CFR

2011-10-01

... during the periods specified in the order for service and as soon as the delay becomes apparent to you... you expect to be able to pick up and/or deliver the shipment. You must consider the needs of the... your amended date or period for pick-up or delivery. (3) You must retain these records as a part of...

49 CFR 375.605 - How must I notify an individual shipper of any service delays?

Code of Federal Regulations, 2010 CFR

2010-10-01

... during the periods specified in the order for service and as soon as the delay becomes apparent to you... you expect to be able to pick up and/or deliver the shipment. You must consider the needs of the... your amended date or period for pick-up or delivery. (3) You must retain these records as a part of...

Protein Interacting with C Kinase 1 (PICK1) Reduces Reinsertion Rates of Interaction Partners Sorted to Rab11-dependent Slow Recycling Pathway*

PubMed Central

Madsen, Kenneth L.; Thorsen, Thor S.; Rahbek-Clemmensen, Troels; Eriksen, Jacob; Gether, Ulrik

2012-01-01

The scaffolding protein PICK1 (protein interacting with C kinase 1) contains an N-terminal PSD-95/Discs large/ZO-1 (PDZ) domain and a central lipid-binding Bin/amphiphysin/Rvs (BAR) domain. PICK1 is thought to regulate trafficking of its PDZ binding partners but different and even opposing functions have been suggested. Here, we apply ELISA-based assays and confocal microscopy in HEK293 cells with inducible PICK1 expression to assess in an isolated system the ability of PICK1 to regulate trafficking of natural and engineered PDZ binding partners. The dopamine transporter (DAT), which primarily sorts to degradation upon internalization, did not form perinuclear clusters with PICK1, and PICK1 did not affect DAT internalization/recycling. However, transfer of the PICK1-binding DAT C terminus to the β2-adrenergic receptor, which sorts to recycling upon internalization, led to formation of PICK1 co-clusters in Rab11-positive compartments. Furthermore, PICK1 inhibited Rab11-mediated recycling of the receptor in a BAR and PDZ domain-dependent manner. In contrast, transfer of the DAT C terminus to the δ-opioid receptor, which sorts to degradation, did not result in PICK1 co-clusters or any change in internalization/recycling. Further support for a role of PICK1 determined by its PDZ cargo was obtained for the PICK1 interaction partner prolactin-releasing peptide receptor (GPR10). GPR10 co-localized with Rab11 and clustered with PICK1 upon constitutive internalization but co-localized with the late endosomal marker Rab7 and did not cluster with PICK1 upon agonist-induced internalization. Our data suggest a selective role of PICK1 in clustering and reducing the recycling rates of PDZ domain binding partners sorted to the Rab11-dependent recycling pathway. PMID:22303009

41 CFR 101-28.306-5 - Safeguards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... these access codes that orders are accepted by the CSC and these codes determine the ship-to points for all orders filled by the CSC with the exception of orders picked up at the CSC by the customer. GSA...

41 CFR 101-28.306-5 - Safeguards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... these access codes that orders are accepted by the CSC and these codes determine the ship-to points for all orders filled by the CSC with the exception of orders picked up at the CSC by the customer. GSA...

Structure of Dimeric and Tetrameric Complexes of the BAR Domain Protein PICK1 Determined by Small-Angle X-Ray Scattering.

PubMed

Karlsen, Morten L; Thorsen, Thor S; Johner, Niklaus; Ammendrup-Johnsen, Ina; Erlendsson, Simon; Tian, Xinsheng; Simonsen, Jens B; Høiberg-Nielsen, Rasmus; Christensen, Nikolaj M; Khelashvili, George; Streicher, Werner; Teilum, Kaare; Vestergaard, Bente; Weinstein, Harel; Gether, Ulrik; Arleth, Lise; Madsen, Kenneth L

2015-07-07

PICK1 is a neuronal scaffolding protein containing a PDZ domain and an auto-inhibited BAR domain. BAR domains are membrane-sculpting protein modules generating membrane curvature and promoting membrane fission. Previous data suggest that BAR domains are organized in lattice-like arrangements when stabilizing membranes but little is known about structural organization of BAR domains in solution. Through a small-angle X-ray scattering (SAXS) analysis, we determine the structure of dimeric and tetrameric complexes of PICK1 in solution. SAXS and biochemical data reveal a strong propensity of PICK1 to form higher-order structures, and SAXS analysis suggests an offset, parallel mode of BAR-BAR oligomerization. Furthermore, unlike accessory domains in other BAR domain proteins, the positioning of the PDZ domains is flexible, enabling PICK1 to perform long-range, dynamic scaffolding of membrane-associated proteins. Together with functional data, these structural findings are compatible with a model in which oligomerization governs auto-inhibition of BAR domain function. Copyright © 2015 Elsevier Ltd. All rights reserved.

Superconductive imaging surface magnetometer

DOEpatents

Overton, Jr., William C.; van Hulsteyn, David B.; Flynn, Edward R.

1991-01-01

An improved pick-up coil system for use with Superconducting Quantum Interference Device gradiometers and magnetometers involving the use of superconducting plates near conventional pick-up coil arrangements to provide imaging of nearby dipole sources and to deflect environmental magnetic noise away from the pick-up coils. This allows the practice of gradiometry and magnetometry in magnetically unshielded environments. One embodiment uses a hemispherically shaped superconducting plate with interior pick-up coils, allowing brain wave measurements to be made on human patients. another embodiment using flat superconducting plates could be used in non-destructive evaluation of materials.

PAL-XFEL cavity beam position monitor pick-up design and beam test

NASA Astrophysics Data System (ADS)

Lee, Sojeong; Park, Young Jung; Kim, Changbum; Kim, Seung Hwan; Shin, Dong Cheol; Han, Jang-Hui; Ko, In Soo

2016-08-01

As an X-ray Free Electron Laser, PAL-XFEL is about to start beam commissioning. X-band cavity beam position monitor (BPM) is used in the PAL-XFEL undulator beam line. Prototypes of cavity BPM pick-up were designed and fabricated to test the RF characteristics. Also, the beam test of a cavity BPM pick-up was done in the Injector Test Facility (ITF). In the beam test, the raw signal properties of the cavity BPM pick-up were measured at a 200 pC bunch charge. According to the RF test and beam test results, the prototype cavity BPM pick-up design was confirmed to meet the requirements of the PAL-XFEL cavity BPM system.

7 CFR 1423.3 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Definitions. Active shipping order means an early shipping order or shipping order, as defined in this section, scheduled for a current cotton warehouse reporting week or for a prior reporting week, but not picked up... for storage. Early shipping order means a list of bale tag numbers sent to a cotton warehouse operator...

An Improved P-Phase Arrival Picking Method S/L-K-A with an Application to the Yongshaba Mine in China

NASA Astrophysics Data System (ADS)

Shang, Xueyi; Li, Xibing; Morales-Esteban, A.; Dong, Longjun

2018-02-01

Automatic microseismic P-phase arrival picking is paramount for microseismic event identification, event location and source mechanism analysis. The commonly used STA/LTA picker, PAI-K picker, AIC picker and three proposed pickers have been applied to determine the P-phase arrivals of 580 microseismic signals (the sampling frequency is 6000 Hz). These have been obtained from the Institute of Mine Seismology (IMS) acquisition system of the Yongshaba mine in China. Then, the six above-mentioned pickers have been compared in their picking accuracy, typical waveforms, signal-to-noise ratio (SNR) adaptabilities and quantitative evaluation. The results have shown that: (1) the triggered STA/LTA picker has a good picking stability but a low picking accuracy. While the PAI-K and the AIC pickers have a higher picking accuracy but a poorer picking stability compared with the triggered STA/LTA picker. Moreover, the AIC picker usually has a better picking result than the PAI-K picker; (2) the S/L-K-A picker significantly improves the STA/LTA, the PAI-K and the S/L + PAI-K pickers. Moreover, it obviously improves the AIC and the S/L + AIC pickers' large picking error (> 30 ms) signals; (3) the picking error ratios of the S/L-K-A picker within 10, 20 and 30 ms achieve 92.76, 95.86 and 97.41%, respectively. The S/L-K-A picker enhances the picking adaptability to different waveforms and SNRs. In conclusion, the S/L-K-A picker provides a new method for automatic microseismic P-phase arrival picking with a high accuracy and a good stability.

Towards Automated Nanomanipulation under Scanning Electron Microscopy

NASA Astrophysics Data System (ADS)

Ye, Xutao

Robotic Nanomaterial Manipulation inside scanning electron microscopes (SEM) is useful for prototyping functional devices and characterizing one-dimensional nanomaterial's properties. Conventionally, manipulation of nanowires has been performed via teleoperation, which is time-consuming and highly skill-dependent. Manual manipulation also has the limitation of low success rates and poor reproducibility. This research focuses on a robotic system capable of automated pick-place of single nanowires. Through SEM visual detection and vision-based motion control, the system transferred individual silicon nanowires from their growth substrate to a microelectromechanical systems (MEMS) device that characterized the nanowires' electromechanical properties. The performances of the nanorobotic pick-up and placement procedures were quantified by experiments. The system demonstrated automated nanowire pick-up and placement with high reliability. A software system for a load-lock-compatible nanomanipulation system is also designed and developed in this research.

A Non-Abelian Geometric Phase for Spin Systems

NASA Astrophysics Data System (ADS)

H M, Bharath; Boguslawski, Matthew; Barrios, Maryrose; Chapman, Michael

Berry's geometric phase has been used to characterize topological phase transitions. Recent works have addressed the question of whether generalizations of Berry's phase to mixed states can be used to characterize topological phase transitions. Berry's phase is essentially the geometric information stored in the overall phase of a quantum system. Here, we show that geometric information is also stored in the higher order spin moments of a quantum spin system. In particular, we show that when the spin vector of a quantum spin system with a spin 1 or higher is transported along a closed path inside the Bloch ball, the tensor of second moments picks up a geometric phase in the form of an SO(3) operator. Geometrically interpreting this phase is tantamount to defining a steradian angle for closed paths inside the Bloch ball. Typically the steradian angle is defined by projecting the path onto the surface of the Bloch ball. However, paths that pass through the center cannot be projected onto the surface. We show that the steradian angles of all paths, including those that pass through the center can be defined by projecting them onto a real projective plane, instead of a sphere. This steradian angle is equal to the geometric phase picked up by a spin system.

7 CFR 1205.500 - Terms defined.

Code of Federal Regulations, 2010 CFR

2010-01-01

... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE COTTON RESEARCH AND PROMOTION Cotton... administrative body established pursuant to the Cotton Research and Promotion Order. (c) CCC means the Commodity... research and promotion assessment, picking charges, ginning charges, warehouse receiving charges, warehouse...

7 CFR 1205.500 - Terms defined.

Code of Federal Regulations, 2011 CFR

2011-01-01

... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE COTTON RESEARCH AND PROMOTION Cotton... administrative body established pursuant to the Cotton Research and Promotion Order. (c) CCC means the Commodity... research and promotion assessment, picking charges, ginning charges, warehouse receiving charges, warehouse...

7 CFR 1000.9 - Handler.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Orders; Milk), DEPARTMENT OF AGRICULTURE GENERAL PROVISIONS OF FEDERAL MILK MARKETING ORDERS Definitions... milk of producers to be picked up at the farm and/or moved to a plant. Persons who qualify as handlers only under this paragraph under any Federal milk order are not subject to the payment provisions of...

7 CFR 1032.13 - Producer milk.

Code of Federal Regulations, 2011 CFR

2011-01-01

... and Orders; Milk), DEPARTMENT OF AGRICULTURE MILK IN THE CENTRAL MARKETING AREA Order Regulating... continuously retained producer status since that time. If a dairy farmer loses producer status under the order... designate, by producer pick-up, which milk is to be removed from the pool. If the handler fails to provide...

7 CFR 1032.13 - Producer milk.

Code of Federal Regulations, 2010 CFR

2010-01-01

... and Orders; Milk), DEPARTMENT OF AGRICULTURE MILK IN THE CENTRAL MARKETING AREA Order Regulating... continuously retained producer status since that time. If a dairy farmer loses producer status under the order... designate, by producer pick-up, which milk is to be removed from the pool. If the handler fails to provide...

P and S automatic picks for 3D earthquake tomography in NE Italy

NASA Astrophysics Data System (ADS)

Lovisa, L.; Bragato, P.; Gentili, S.

2006-12-01

Earthquake tomography is useful to study structural and geological features of the crust. In particular, it uses P and S arrival times for reconstructing weaves velocity fields and locating earthquakes hypocenters. However, tomography needs a large effort to provide a high number of manual picks. On the other side, many automatic picking methods have been proposed, but they are usually applied to preliminary elaboration of the data (fast alert and automatic bulletin generation); they are generally considered not reliable for tomography. In this work, we present and discuss the results of Vp, Vs and Vp/Vs tomographies obtained using automatic picks generated by the system TAPNEI (Gentili and Bragato 2006), applied in the NE Italy. Preliminarily, in order to estimate the error in comparison with the unknown true arrival times, an analysis on the picking quality is done. The tests have been performed using two dataset: the first is made up by 240 earthquakes automatically picked by TAPNEI; the second counts in the same earthquakes but manually picked (OGS database). The grid and the software used to perform tomography (Sim28, Michelini and Mc Evilly, 1991) are the same in the two cases. Vp, Vs and Vp/Vs fields of the two tomographies and their differences are shown on vertical sections. In addiction, the differences in earthquakes locations are studied; in particular, the quality of the accuracy of the localizations has been analyzed by estimating the distance of the hypocenter distributions with respect to the manual locations. The analysis include also a qualitative comparison with an independent tomography (Gentile et al., 2000) performed using Simulps (Evans et al, 1994) on a set of 224 earthquakes accurately selected and manually relocated. The quality of the pickings and the comparison with the tomography obtained by manual data suggest that earthquake tomography with automatic data can provide reliable results. We suggest the use of such data when a large quantity of recordings must by quickly analyzed to provide some preliminary results (e.g., to decide about further data acquisition when using temporary networks) or when a sort of "real-time tomography" is required (e.g., continuous imaging of volcanoes during their activity). References Evans J.R., Eberhart-Phillips D., and Thurber C.H. (1994). User's manual for simulps12 for imaging vp and vp/vs: a derivative of the Thurber tomographic inversion simul3 for local earthquakes locations and explosions, U.S.Geol. Surv. Open File Report, 7 pp. Gentile, G. F., Bressan, G., Burlini, L., De Franco, R., 2000, Three - dimensional Vp and Vp/Vs models of the upper crust in the Friuli area (Northeastern Italy)., Geophys. Journ. Int., 141, 457-478. Gentili S. and Bragato P. L., 2006,"A neural-tree-based system for automatic location of earthquakes in Northeastern Italy" Journal of Seismology, Volume 10, Number 1, pp.73-89. Michelini, A., Mcevilly, T. V., 1991, "Seismological studies at Parkfield; I, Simultaneous inversion for velocity structure and hypocenters using cubic B-splines parameterization.", Bulletin of the Seismological Society of America, 81, 2, 524-552.

Visual recognition system of cherry picking robot based on Lab color model

NASA Astrophysics Data System (ADS)

Zhang, Qirong; Zuo, Jianjun; Yu, Tingzhong; Wang, Yan

2017-12-01

This paper designs a visual recognition system suitable for cherry picking. First, the system deals with the image using the vector median filter. And then it extracts a channel of Lab color model to divide the cherries and the background. The cherry contour was successfully fitted by the least square method, and the centroid and radius of the cherry were extracted. Finally, the cherry was successfully extracted.

An automated framework for NMR resonance assignment through simultaneous slice picking and spin system forming.

PubMed

Abbas, Ahmed; Guo, Xianrong; Jing, Bing-Yi; Gao, Xin

2014-06-01

Despite significant advances in automated nuclear magnetic resonance-based protein structure determination, the high numbers of false positives and false negatives among the peaks selected by fully automated methods remain a problem. These false positives and negatives impair the performance of resonance assignment methods. One of the main reasons for this problem is that the computational research community often considers peak picking and resonance assignment to be two separate problems, whereas spectroscopists use expert knowledge to pick peaks and assign their resonances at the same time. We propose a novel framework that simultaneously conducts slice picking and spin system forming, an essential step in resonance assignment. Our framework then employs a genetic algorithm, directed by both connectivity information and amino acid typing information from the spin systems, to assign the spin systems to residues. The inputs to our framework can be as few as two commonly used spectra, i.e., CBCA(CO)NH and HNCACB. Different from the existing peak picking and resonance assignment methods that treat peaks as the units, our method is based on 'slices', which are one-dimensional vectors in three-dimensional spectra that correspond to certain ([Formula: see text]) values. Experimental results on both benchmark simulated data sets and four real protein data sets demonstrate that our method significantly outperforms the state-of-the-art methods while using a less number of spectra than those methods. Our method is freely available at http://sfb.kaust.edu.sa/Pages/Software.aspx.

Calculation of longitudinal and transverse wake-field effects in dielectric structures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gai, W.

1989-01-01

The electro-magnetic radiation of a charged particle passing through a dielectric structure has many applications to accelerator physics. Recently a new acceleration scheme, called the dielectric wake field accelerator, has been proposed. It also can be used as a pick up system for a storage ring because of its slow wave characteristics. In order to study these effects in detail, in this paper we will calculate the wake field effects produced in a dielectric structure by a charged particle. 8 refs., 2 figs.

Material handling robot system for flow-through storage applications

NASA Astrophysics Data System (ADS)

Dill, James F.; Candiloro, Brian; Downer, James; Wiesman, Richard; Fallin, Larry; Smith, Ron

1999-01-01

This paper describes the design, development and planned implementation of a system of mobile robots for use in flow through storage applications. The robots are being designed with on-board embedded controls so that they can perform their tasks as semi-autonomous workers distributed within a centrally controlled network. On the storage input side, boxes will be identified by bar-codes and placed into preassigned flow through bins. On the shipping side, orders will be forwarded to the robots from a central order processing station and boxes will be picked from designated storage bins following proper sequencing to permit direct loading into trucks for shipping. Because of the need to maintain high system availability, a distributed control strategy has been selected. When completed, the system will permit robots to be dynamically reassigned responsibilities if an individual unit fails. On-board health diagnostics and condition monitoring will be used to maintain high reliability of the units.

Experimental Investigation of the Influence of Confining Stress on Hard Rock Fragmentation Using a Conical Pick

NASA Astrophysics Data System (ADS)

Li, Xibing; Wang, Shaofeng; Wang, Shanyong

2018-01-01

High geostress is a prominent condition in deep excavations and affects the cuttability of deep hard rock. This study aims to determine the influence of confining stress on hard rock fragmentation as applied by a conical pick. Using a true triaxial test apparatus, static and coupled static and dynamic loadings from pick forces were applied to end faces of cubic rock specimens to break them under biaxial, uniaxial and stress-free confining stress conditions. The cuttability indices (peak pick force, insertion depth and disturbance duration), failure patterns and fragment sizes were measured and compared to estimate the effects of confining stress. The results show that the rock cuttabilities decreased in order from rock breakages under stress-free conditions to uniaxial confining stress and then to biaxial confining stress. Under biaxial confining stress, only flake-shaped fragments were stripped from the rock surfaces under the requirements of large pick forces or disturbance durations. As the level of uniaxial confining stress increased, the peak pick force and the insertion depth initially increased and then decreased, and the failure patterns varied from splitting to partial splitting and then to rock bursts with decreasing average fragment sizes. Rock bursts will occur under elastic compression via ultra-high uniaxial confining stresses. There are two critical uniaxial confining stress levels, namely stress values at which peak pick forces begin to decrease and improve rock cuttability, and those at which rock bursts initially occur and cutting safety decreases. In particular, hard rock is easiest to split safely and efficiently under stress-free conditions. Moreover, coupled static preloading and dynamic disturbance can increase the efficiency of rock fragmentation with increasing preloading levels and disturbance amplitudes. The concluding remarks confirm hard rock cuttability using conical pick, which can improve the applicability of mechanical excavation in deep hard rock masses.

7 CFR 983.155 - Reinspection.

Code of Federal Regulations, 2011 CFR

2011-01-01

... and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE PISTACHIOS GROWN IN CALIFORNIA... that is pin-picked, hand-sorted, color-sorted, and/or resized is considered to be “materially changed..., handlers exempted from order requirements under § 983.92 are exempt from all reinspection requirements. [70...

A New First Break Picking for Three-Component VSP Data Using Gesture Sensor and Polarization Analysis

PubMed Central

Li, Huailiang; Tuo, Xianguo; Shen, Tong; Wang, Ruili; Courtois, Jérémie; Yan, Minhao

2017-01-01

A new first break picking for three-component (3C) vertical seismic profiling (VSP) data is proposed to improve the estimation accuracy of first arrivals, which adopts gesture detection calibration and polarization analysis based on the eigenvalue of the covariance matrix. This study aims at addressing the problem that calibration is required for VSP data using the azimuth and dip angle of geophones, due to the direction of geophones being random when applied in a borehole, which will further lead to the first break picking possibly being unreliable. Initially, a gesture-measuring module is integrated in the seismometer to rapidly obtain high-precision gesture data (including azimuth and dip angle information). Using re-rotating and re-projecting using earlier gesture data, the seismic dataset of each component will be calibrated to the direction that is consistent with the vibrator shot orientation. It will promote the reliability of the original data when making each component waveform calibrated to the same virtual reference component, and the corresponding first break will also be properly adjusted. After achieving 3C data calibration, an automatic first break picking algorithm based on the autoregressive-Akaike information criterion (AR-AIC) is adopted to evaluate the first break. Furthermore, in order to enhance the accuracy of the first break picking, the polarization attributes of 3C VSP recordings is applied to constrain the scanning segment of AR-AIC picker, which uses the maximum eigenvalue calculation of the covariance matrix. The contrast results between pre-calibration and post-calibration using field data show that it can further improve the quality of the 3C VSP waveform, which is favorable to subsequent picking. Compared to the obtained short-term average to long-term average (STA/LTA) and the AR-AIC algorithm, the proposed method, combined with polarization analysis, can significantly reduce the picking error. Applications of actual field experiments have also confirmed that the proposed method may be more suitable for the first break picking of 3C VSP. Test using synthesized 3C seismic data with low SNR indicates that the first break is picked with an error between 0.75 ms and 1.5 ms. Accordingly, the proposed method can reduce the picking error for 3C VSP data. PMID:28925981

To develop a flying fish egg inspection system by a digital imaging base system

NASA Astrophysics Data System (ADS)

Chen, Chun-Jen; Jywe, Wenyuh; Hsieh, Tung-Hsien; Chen, Chien Hung

2015-07-01

This paper develops an automatic optical inspection system for flying fish egg quality inspection. The automatic optical inspection system consists of a 2-axes stage, a digital camera, a lens, a LED light source, a vacuum generator, a tube and a tray. This system can automatically find the particle on the flying egg tray and used stage to driver the tube onto the particle. Then use straw and vacuum generator to pick up the particle. The system pick rate is about 30 particles per minute.

Effect of horizontal pick and place locations on shoulder kinematics.

PubMed

Könemann, R; Bosch, T; Kingma, I; Van Dieën, J H; De Looze, M P

2015-01-01

In this study the effects of horizontal bin locations in an order picking workstation on upper arm elevation, trunk inclination and hand use were investigated. Eight subjects moved (self-paced) light or heavy products (0.2 and 3.0 kg) from a central product bin to an inner or outer order bin (at 60 or 150 cm) on the left or right side of the workstation, while movements were recorded. The outer compared to inner bin location resulted in more upper arm elevation and trunk inclination per work cycle, both in terms of number of peak values and in terms of time integrals of angles (which is a dose measure over time). Considering the peak values and time integrals per minute (instead of per work cycle), these effects are reduced, due to the higher cycle times for outer bins. Hand use (left, right or both) was not affected by order bin locations.

49 CFR 375.501 - Must I write up an order for service?

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 5 2011-10-01 2011-10-01 false Must I write up an order for service? 375.501... TRANSPORTATION OF HOUSEHOLD GOODS IN INTERSTATE COMMERCE; CONSUMER PROTECTION REGULATIONS Pick Up of Shipments of Household Goods Before Loading § 375.501 Must I write up an order for service? (a) Before you receive a...

27 CFR 41.261 - Records.

Code of Federal Regulations, 2010 CFR

2010-04-01

... person placing the order with the importer (for example, the importer is not an independent contractor but the agent of the person placing the order). Records maintained must reflect the date and quantity... picking up the processed tobacco for delivery; (3) The license number of the vehicle in which the...

27 CFR 41.261 - Records.

Code of Federal Regulations, 2011 CFR

2011-04-01

... person placing the order with the importer (for example, the importer is not an independent contractor but the agent of the person placing the order). Records maintained must reflect the date and quantity... picking up the processed tobacco for delivery; (3) The license number of the vehicle in which the...

Single-pulse picking at kHz repetition rates using a Ge plasma switch at the free-electron laser FELBE.

PubMed

Schmidt, J; Winnerl, S; Seidel, W; Bauer, C; Gensch, M; Schneider, H; Helm, M

2015-06-01

We demonstrate a system for picking of mid-infrared and terahertz (THz) radiation pulses from the free-electron laser (FEL) FELBE operating at a repetition rate of 13 MHz. Single pulses are reflected by a dense electron-hole plasma in a Ge slab that is photoexcited by amplified near-infrared (NIR) laser systems operating at repetition rates of 1 kHz and 100 kHz, respectively. The peak intensity of picked pulses is up to 400 times larger than the peak intensity of residual pulses. The required NIR fluence for picking pulses at wavelengths in the range from 5 μm to 30 μm is discussed. In addition, we show that the reflectivity of the plasma decays on a time scale from 100 ps to 1 ns dependent on the wavelengths of the FEL and the NIR laser. The plasma switch enables experiments with the FEL that require high peak power but lower average power. Furthermore, the system is well suited to investigate processes with decay times in the μs to ms regime, i.e., much longer than the 77 ns long pulse repetition period of FELBE.

Single-pulse picking at kHz repetition rates using a Ge plasma switch at the free-electron laser FELBE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schmidt, J., E-mail: j.schmidt@hzdr.de; Helm, M.; Technische Universität Dresden, 01062 Dresden

2015-06-15

We demonstrate a system for picking of mid-infrared and terahertz (THz) radiation pulses from the free-electron laser (FEL) FELBE operating at a repetition rate of 13 MHz. Single pulses are reflected by a dense electron-hole plasma in a Ge slab that is photoexcited by amplified near-infrared (NIR) laser systems operating at repetition rates of 1 kHz and 100 kHz, respectively. The peak intensity of picked pulses is up to 400 times larger than the peak intensity of residual pulses. The required NIR fluence for picking pulses at wavelengths in the range from 5 μm to 30 μm is discussed. Inmore » addition, we show that the reflectivity of the plasma decays on a time scale from 100 ps to 1 ns dependent on the wavelengths of the FEL and the NIR laser. The plasma switch enables experiments with the FEL that require high peak power but lower average power. Furthermore, the system is well suited to investigate processes with decay times in the μs to ms regime, i.e., much longer than the 77 ns long pulse repetition period of FELBE.« less

Current controversies in Niemann-Pick C1 disease: steroids or gangliosides; neurons or neurons and glia.

PubMed

Erickson, Robert P

2013-05-01

There has been a recent explosion in research on Niemann-Pick type C disease. Much of the work has used mouse models or cells in culture to elucidate the pathophysiological mechanisms resulting in the phenotype of the disease. This work has generated several contrasting views on the mechanism, which are labeled 'controversies' here. In this review, two of these controversies are explored. The first concerns which stored materials are causative in the disease: cholesterol, gangliosides and sphingolipids, or something else? The second concerns which cells in the body require Npc1 in order to function properly: somatic cells, neurons only, or neurons and glia? For the first controversy, a clear answer has emerged. More research will be needed in order to definitively solve the second controversy.

7 CFR 1230.626 - Facilities for registering and voting.

Code of Federal Regulations, 2010 CFR

2010-01-01

... MARKETING SERVICE (MARKETING AGREEMENTS AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE... under observation during office hours and secured at all times; and (3) Copies of the Order for review... upon request. Producers can pick up an absentee ballot in-person or request it by telephone, mail, or...

16 CFR 255.1 - General considerations.

Code of Federal Regulations, 2011 CFR

2011-01-01

...'s endorsement, the advertiser must contact the contractor in order to determine whether the... keyboard and then picking the advertiser's brand. The announcer asks her why, and X gives her reasons. This... services. [See § 255.5.] In order to limit its potential liability, the advertiser should ensure that the...

11 CFR 4.9 - Fees.

Code of Federal Regulations, 2011 CFR

2011-01-01

... reformulate the original request in order to meet the requestor's needs at a lower cost. (4) The following is... for Presentation in Good Order. Computer Tapes Cost to process the request at the rate of $25.00 per... all arrangements for pick-up and delivery of the requested materials. The requestor shall pay all...

7 CFR 1230.626 - Facilities for registering and voting.

Code of Federal Regulations, 2011 CFR

2011-01-01

... MARKETING SERVICE (MARKETING AGREEMENTS AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE... under observation during office hours and secured at all times; and (3) Copies of the Order for review... upon request. Producers can pick up an absentee ballot in-person or request it by telephone, mail, or...

Entropy model of dissipative structure on corporate social responsibility

NASA Astrophysics Data System (ADS)

Li, Zuozhi; Jiang, Jie

2017-06-01

Enterprise is prompted to fulfill the social responsibility requirement by the internal and external environment. In this complex system, some studies suggest that firms have an orderly or chaotic entropy exchange behavior. Based on the theory of dissipative structure, this paper constructs the entropy index system of corporate social responsibility(CSR) and explores the dissipative structure of CSR through Brusselator model criterion. Picking up listed companies of the equipment manufacturing, the research shows that CSR has positive incentive to negative entropy and promotes the stability of dissipative structure. In short, the dissipative structure of CSR has a positive impact on the interests of stakeholders and corporate social images.

7 CFR 989.104 - Lot.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE RAISINS PRODUCED FROM GRAPES GROWN IN... picking boxes and bins), which does not exceed a car, truck, or truck-trailer load, and which is submitted...

47 CFR 74.631 - Permissible service.

Code of Federal Regulations, 2010 CFR

2010-10-01

... transmission of program material, orders concerning such program material, and related communications necessary... 6875-7125 MHz may be used by broadcast network-entities only for television pick-up stations. [28 FR...

7 CFR 989.104 - Lot.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE RAISINS PRODUCED FROM GRAPES GROWN IN... picking boxes and bins), which does not exceed a car, truck, or truck-trailer load, and which is submitted...

47 CFR 74.631 - Permissible service.

Code of Federal Regulations, 2011 CFR

2011-10-01

... transmission of program material, orders concerning such program material, and related communications necessary... 6875-7125 MHz may be used by broadcast network-entities only for television pick-up stations. [28 FR...

3D GPR in forensics: Finding a clandestine grave in a mountainous environment.

PubMed

Novo, Alexandre; Lorenzo, Henrique; Rial, Fernando I; Solla, Mercedes

2011-01-30

In the present work we show a forensic case study carried out in a mountainous environment. Main objective was to locate a clandestine grave which is around 10-20 years old and contains human remains of one individual and a metallic tool, probably a pick. Survey design started with an experimental burial of a pick at the expected depth (1m) as well as the calculation of synthetic radargrams in order to know if the 250MHz antenna was suitable for its detection and to have a record of the reflection of the pick. Conclusions extracted from the experiments together with rough terrain conditions suggested the use of the 250MHz antenna which allowed a good compromise between target detection and dense grid acquisition of an extensive survey area. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

The design of the automated control system for warehouse equipment under radio-electronic manufacturing

NASA Astrophysics Data System (ADS)

Kapulin, D. V.; Chemidov, I. V.; Kazantsev, M. A.

2017-01-01

In the paper, the aspects of design, development and implementation of the automated control system for warehousing under the manufacturing process of the radio-electronic enterprise JSC «Radiosvyaz» are discussed. The architecture of the automated control system for warehousing proposed in the paper consists of a server which is connected to the physically separated information networks: the network with a database server, which stores information about the orders for picking, and the network with the automated storage and retrieval system. This principle allows implementing the requirements for differentiation of access, ensuring the information safety and security requirements. Also, the efficiency of the developed automated solutions in terms of optimizing the warehouse’s logistic characteristics is researched.

77 FR 38067 - Medicare Program; Public Meeting Regarding Inherent Reasonableness of Medicare Fee Schedule...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-26

... forth in 42 CFR 414.402 will be used to determine what items will be included in the competitions. These..., regardless of the method of delivery. Non-Mail Order Item--Any item that a beneficiary or caregiver picks up... what Medicare pays for mail order supplies versus non-mail order supplies may encourage fraud and abuse...

24 CFR 891.435 - Security deposits.

Code of Federal Regulations, 2011 CFR

2011-04-01

... payments on security deposits. (2) Household (or family, as applicable) notification requirement. In order... Owner (or Borrower, as applicable) with a forwarding address or arrange to pick up the refund. (3) Use...

49 CFR 375.519 - Must I obtain weight tickets?

Code of Federal Regulations, 2011 CFR

2011-10-01

... TRANSPORTATION OF HOUSEHOLD GOODS IN INTERSTATE COMMERCE; CONSUMER PROTECTION REGULATIONS Pick Up of Shipments of... shipment weight in order to collect any shipment charges dependent upon the weight transported. ...

24 CFR 891.435 - Security deposits.

Code of Federal Regulations, 2010 CFR

2010-04-01

... payments on security deposits. (2) Household (or family, as applicable) notification requirement. In order... Owner (or Borrower, as applicable) with a forwarding address or arrange to pick up the refund. (3) Use...

49 CFR 375.519 - Must I obtain weight tickets?

Code of Federal Regulations, 2010 CFR

2010-10-01

... TRANSPORTATION OF HOUSEHOLD GOODS IN INTERSTATE COMMERCE; CONSUMER PROTECTION REGULATIONS Pick Up of Shipments of... shipment weight in order to collect any shipment charges dependent upon the weight transported. ...

Teaching Children with Niemann-Pick Disease

ERIC Educational Resources Information Center

Gartin, Barbara C.; Murdick, Nikki L.; Cooley, Jennifer; Barnett, Sara

2013-01-01

Niemann-Pick Disease (NPD) is a group of rare inherited disorders that are both systemic and degenerative. Knowledge of the disease, its characteristics, and its progression are essential for the teacher and related service personnel to provide an appropriate educational experience for the student. For the teacher who has a student with NPC in…

RF Telemetry System for an Implantable Bio-MEMS Sensor

NASA Technical Reports Server (NTRS)

Simons, Rainee N.; Hall, David G.; Miranda, Felix A.

2004-01-01

In this paper, a novel miniature inductor and a pick-up antenna for contact less powering and RF telemetry from implantable bio-MEMS sensors are presented. The design of the inductor and the pick-up antenna are discussed. In addition, the measured characteristics at the design frequency of 330 MHz have been shown.

Curve Set Feature-Based Robust and Fast Pose Estimation Algorithm

PubMed Central

Hashimoto, Koichi

2017-01-01

Bin picking refers to picking the randomly-piled objects from a bin for industrial production purposes, and robotic bin picking is always used in automated assembly lines. In order to achieve a higher productivity, a fast and robust pose estimation algorithm is necessary to recognize and localize the randomly-piled parts. This paper proposes a pose estimation algorithm for bin picking tasks using point cloud data. A novel descriptor Curve Set Feature (CSF) is proposed to describe a point by the surface fluctuation around this point and is also capable of evaluating poses. The Rotation Match Feature (RMF) is proposed to match CSF efficiently. The matching process combines the idea of the matching in 2D space of origin Point Pair Feature (PPF) algorithm with nearest neighbor search. A voxel-based pose verification method is introduced to evaluate the poses and proved to be more than 30-times faster than the kd-tree-based verification method. Our algorithm is evaluated against a large number of synthetic and real scenes and proven to be robust to noise, able to detect metal parts, more accurately and more than 10-times faster than PPF and Oriented, Unique and Repeatable (OUR)-Clustered Viewpoint Feature Histogram (CVFH). PMID:28771216

Pick-up and impact of flexible bodies

NASA Astrophysics Data System (ADS)

Singh, H.; Hanna, J. A.

2017-09-01

Picking up, laying down, colliding, rolling, and peeling are partial-contact interactions involving moving discontinuities. We examine the balances of momentum and energy across a moving discontinuity in a string, with allowance for injection or dissipation by singular supplies. We split the energy dissipation according to its invariance properties, discuss analogies with systems of particles and connections with the literature on shocks and phase transition fronts in various bodies, and derive a compatibility relation between supplies of momentum and translation-invariant energy. For a moving contact discontinuity between a string and a smooth rigid plane in the presence of gravity, we find a surprising asymmetry between the processes of picking up and laying down, such that steady-state kinks in geometry and associated jumps in tension are not admissible during pick-up. This prediction is consistent with experimental observations. We briefly discuss related problems including the falling folded chain, peeling of an adhesive tape, and the "chain fountain". Our approach is applicable to the study of impact and locomotion, and to systems such as moored floating structures and some musical instruments that feature vibrating string and cable elements interacting with a surface.

7 CFR 1230.629 - Registration and voting procedures for importers.

Code of Federal Regulations, 2010 CFR

2010-01-01

...) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF.... Brown, P.O. Box 44366, Washington, DC 20026-4366. Importers may pick up the voting materials in-person...

7 CFR 1230.629 - Registration and voting procedures for importers.

Code of Federal Regulations, 2011 CFR

2011-01-01

...) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF.... Brown, P.O. Box 44366, Washington, DC 20026-4366. Importers may pick up the voting materials in-person...

Pick-Sloan Tribal Commission Act of 2010

THOMAS, 111th Congress

Sen. Dorgan, Byron L. [D-ND

2010-07-26

Senate - 12/08/2010 Placed on Senate Legislative Calendar under General Orders. Calendar No. 680. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

78 FR 31860 - Airworthiness Directives; Bell Helicopter Textron, Inc., Helicopters

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-28

... altitude between the pick-up and drop-off point. We have determined that other external load lift... following costs in order to comply with this AD. It would take about 1 work-hour for the record keeping... would not have federalism implications under Executive Order 13132. This proposed AD would not have a...

Fast Food: Tips for Choosing Healthier Options

MedlinePlus

... meal choices when going to a fast-food restaurant. By Mayo Clinic Staff Does following a weight- ... order. Consider these tips. If the fast-food restaurant offers several sandwich sizes, pick the smallest. Bypass ...

7 CFR 1230.625 - Time and place of registration and voting.

Code of Federal Regulations, 2011 CFR

2011-01-01

... MARKETING SERVICE (MARKETING AGREEMENTS AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE... facsimile, or pick up an absentee ballot in-person. The absentee voting period shall be from August 18, 2000...

43 CFR 6302.20 - What is prohibited in wilderness?

Code of Federal Regulations, 2011 CFR

2011-10-01

... motor vehicles, motorboats, or other forms of mechanical transport; (e) Land aircraft, or drop or pick... other similar exercises; (j) [Reserved]; or (k) Violate any BLM regulation, authorization, or order. [65...

29 CFR 570.110 - “In or about”.

Code of Federal Regulations, 2010 CFR

2010-07-01

... REGULATIONS, ORDERS AND STATEMENTS OF INTERPRETATION General Statements of Interpretation of the Child Labor... purpose of picking up or delivering a message or other small article. (b) If, in the light of the...

7 CFR 1230.625 - Time and place of registration and voting.

Code of Federal Regulations, 2010 CFR

2010-01-01

... MARKETING SERVICE (MARKETING AGREEMENTS AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE... facsimile, or pick up an absentee ballot in-person. The absentee voting period shall be from August 18, 2000...

29 CFR 570.110 - “In or about”.

Code of Federal Regulations, 2011 CFR

2011-07-01

... REGULATIONS, ORDERS AND STATEMENTS OF INTERPRETATION General Statements of Interpretation of the Child Labor... purpose of picking up or delivering a message or other small article. (b) If, in the light of the...

Protein assignments without peak lists using higher-order spectra.

PubMed

Benison, Gregory; Berkholz, Donald S; Barbar, Elisar

2007-12-01

Despite advances in automating the generation and manipulation of peak lists for assigning biomolecules, there are well-known advantages to working directly with spectra: the eye is still superior to computer algorithms when it comes to picking out peak relationships from contour plots in the presence of confounding factors such as noise, overlap, and spectral artifacts. Here, we present constructs called higher-order spectra for identifying, through direct visual examination, many of the same relationships typically identified by searching peak lists, making them another addition to the set of tools (alongside peak picking and automated assignment) that can be used to solve the assignment problem. The technique is useful for searching for correlated peaks in any spectrum type. Application of this technique to novel, complete sequential assignment of two proteins (AhpFn and IC74(84-143)) is demonstrated. The program "burrow-owl" for the generation and display of higher-order spectra is available at (http://sourceforge.net/projects/burrow-owl) or from the authors.

Order-picking in deep cold--physiological responses of younger and older females. Part 1: heart rate.

PubMed

Kluth, Karsten; Baldus, Sandra; Strasser, Helmut

2012-01-01

The sales figures of chilled and frozen food have been rising steadily over the years. Naturally, this has also led to an increase in the number of jobs related to these goods. While these workplaces are becoming more and more important there are, nevertheless, only a few investigations into the effects of working in deep cold on humans. Order-picking in a cold environment represents a high workload. Especially working at -24°C with wearing heavy cold protective clothing leads to explicitly higher strain. Since performance decreases with age, varying physical strain between younger and older employees can hypothetically be expected. In order to quantify the physiological responses to working in the cold, 15 subjects of two female age groups, each, (20- to 35-year-olds and 40- to 65-year-olds) were asked to carry out whole working day tasks in a chill room (+3°) and in a cold store (-24°C). Simultaneously, heart rate and other physiological relevant parameters were measured.

Prevalence of unclaimed prescriptions at military pharmacies.

PubMed

Esposito, Dominick; Schone, Eric; Williams, Thomas; Liu, Su; CyBulski, Karen; Stapulonis, Rita; Clusen, Nancy

2008-01-01

Prescriptions that are ordered by physicians but not picked up by patients represent a potential quality improvement opportunity in health systems. Previous research has demonstrated that anywhere from as little as 0.28% to as much as 30.0% of prescriptions are unclaimed, and that 0.45% to 22.0% of patients fail to claim prescriptions. In the Military Health System (MHS), prescriptions filled at military pharmacies are dispensed with no copayment, providing an opportunity to examine the factors that contribute to unclaimed prescriptions other than out-of-pocket cost. To estimate the prevalence of unclaimed prescriptions in the MHS, investigate reasons for unclaimed prescriptions, and compare self-reported noncompliance, defined as the failure to pick up at least 1 prescription in a 12-month period, with evidence from an administrative database of prescription orders and dispensings. Research methods included pharmacy staff interviews at 6 military pharmacies, a telephone survey of beneficiaries who filled prescriptions at these pharmacies, descriptive analysis of survey data, and comparison of administrative pharmacy data with self-reported survey data. Beneficiary interviews, conducted from May through July 2004, covered background characteristics, medical conditions, and unclaimed prescriptions, relying on 12 months of recall regarding noncompliance. Interviews with pharmacy staff covered day-to-day operations, factors that alleviate or exacerbate noncompliance, and the burden that noncompliance places on pharmacies. Administrative data from the Pharmacy Data Transaction Service (pharmacy claims) and Composite Health Care System (CHCS: prescription orders and dispensings) databases were used to select a random sample for the beneficiary survey. Survey respondents' CHCS data were matched to their responses to determine the degree of agreement between self-reports and administrative data. Pharmacy interviews were completed with 30 staff members at 6 military pharmacies, and telephone interviews were completed with 1,214 beneficiaries (60.6% response rate). Beneficiary respondents filled an average of 7 prescriptions in the 5 months approximately surrounding the survey administration time frame (from March to July 2004). More than half (56.8%) of respondents were female, and nearly 60.6% were retired military or their dependents. Among all respondents at all study pharmacies, 8.0% reported failing to claim at least 1 prescription during the prior 12 months. Among survey respondents deemed compliant by CHCS data, 93.8% correctly identified themselves as compliant. However, among patients identified as noncompliant using CHCS data, only 16.0% selfidentified as noncompliant. The administrative data were not concordant with self-report data: of 105 survey respondents identifying themselves as noncompliant in the prior year and matched to administrative data (CHCS), only 58.1% were noncompliant per administrative data, and of 1,065 selfidentifying as compliant, only 61.1% were compliant per administrative data. The most common reasons cited by respondents for not picking up their prescriptions were: no perceived need for the prescription (18.5% of the noncompliant), forgot to pick it up (17.3%), the prescription was not in stock (14.8%), long wait time (11.1%), the prescription was not yet available (10.5%), was out of town (9.9%), and was too busy to pick up the prescription (6.2%). Factors associated with unclaimed prescriptions were: younger age, active duty military status, lower educational levels, and the absence of certain chronic medical conditions (i.e., no claims for cardiovascular medications, no self-reported arthritis). The present study's survey findings of an 8.0% selfreported noncompliance rate fall in the midrange of noncompliance rates reported in previous literature: between 0.45% and 22.0% in nonmilitary populations. Although reported reasons for noncompliance were generally consistent with those identified in previously published studies, they were only partially consistent with previous military pharmacy literature, which also found that patients did not know they had a prescription waiting or had some of the prescribed medicine at home. Concordance between measures of noncompliance, comparing administrative data with patient self-report based on 12-month recall, was poor.

Pick-off annihilation of positronium in matter using full correlation single particle potentials: solid He.

PubMed

Zubiaga, A; Tuomisto, F; Puska, M J

2015-01-29

We investigate the modeling of positronium (Ps) states and their pick-off annihilation trapped at open volumes pockets in condensed molecular matter. Our starting point is the interacting many-body system of Ps and a He atom because it is the smallest entity that can mimic the energy gap between the highest occupied and lowest unoccupied molecular orbitals of molecules, and yet the many-body structure of the HePs system can be calculated accurately enough. The exact-diagonalization solution of the HePs system enables us to construct a pairwise full-correlation single-particle potential for the Ps-He interaction, and the total potential in solids is obtained as a superposition of the pairwise potentials. We study in detail Ps states and their pick-off annihilation rates in voids inside solid He and analyze experimental results for Ps-induced voids in liquid He obtaining the radii of the voids. More importantly, we generalize our conclusions by testing the validity of the Tao-Eldrup model, widely used to analyze ortho-Ps annihilation measurements for voids in molecular matter, against our theoretical results for the solid He. Moreover, we discuss the influence of the partial charges of polar molecules and the strength of the van der Waals interaction on the pick-off annihilation rate.

Expertise and the spatio-temporal characteristics of anticipatory information pick-up from complex movement patterns.

PubMed

Müller, Sean; Abernethy, Bruce; Eid, Michael; McBean, Rohan; Rose, Matthew

2010-01-01

Groups of high- (n = 14), intermediate- (n = 12), and low-skilled (n = 15) cricket batsmen participated in two experiments to examine expertise-related differences in anticipatory information pick-up that combined temporal and spatial occlusion methodologies. In experiment 1 participants were shown video displays of a bowler delivering one of three different types of delivery with the display manipulated so that only selected local features of the bowler's movement pattern (bowling hand, bowling hand and arm, trunk, lower body, or whole body) were visible and then only for specific time periods prior to ball release. Only the highly-skilled players were able to produce better-than-chance predictions of ball type and then only under a limited set of display conditions. Information from bowling hand and arm cues was particularly critical although continuous visibility of these cues was apparently not essential for information pick-up. In experiment 2 the order in which particular features were made visible throughout the bowler's movement pattern was varied in an attempt to find the sequence of cues that was most favourable for effective information pick-up. The necessity in this experiment to switch vision between different features eliminated the highly-skilled players' capability to anticipate. Expert anticipation is dependent on sensitivity to information arising from a select set of local cues, and forced attentional switches between different cues negate effective information pick-up and, with it, the expert advantage.

Robust automatic P-phase picking: an on-line implementation in the analysis of broadband seismogram recordings

NASA Astrophysics Data System (ADS)

Sleeman, Reinoud; van Eck, Torild

1999-06-01

The onset of a seismic signal is determined through joint AR modeling of the noise and the seismic signal, and the application of the Akaike Information Criterion (AIC) using the onset time as parameter. This so-called AR-AIC phase picker has been tested successfully and implemented on the Z-component of the broadband station HGN to provide automatic P-phase picks for a rapid warning system. The AR-AIC picker is shown to provide accurate and robust automatic picks on a large experimental database. Out of 1109 P-phase onsets with signal-to-noise ratio (SNR) above 1 from local, regional and teleseismic earthquakes, our implementation detects 71% and gives a mean difference with manual picks of 0.1 s. An optimal version of the well-established picker of Baer and Kradolfer [Baer, M., Kradolfer, U., An automatic phase picker for local and teleseismic events, Bull. Seism. Soc. Am. 77 (1987) 1437-1445] detects less than 41% and gives a mean difference with manual picks of 0.3 s using the same dataset.

Develop and pilot test smart phone/tablet app for paratransit demand-response passenger pick-up alerts to assist passengers with disabilities and reduce no-shows and dwell times.

DOT National Transportation Integrated Search

2016-12-01

This research produced an arrival notification system for paratransit passengers with disabilities. Almost all existing curb-to-curb paratransit services have significantly large pick-up time window ranging from 20 to 40 minutes from the scheduled ti...

Machine vision for various manipulation tasks

NASA Astrophysics Data System (ADS)

Domae, Yukiyasu

2017-03-01

Bin-picking, re-grasping, pick-and-place, kitting, etc. There are many manipulation tasks in the fields of automation of factory, warehouse and so on. The main problem of the automation is that the target objects (items/parts) have various shapes, weights and surface materials. In my talk, I will show latest machine vision systems and algorithms against the problem.

41 CFR 102-41.230 - May SASPs pick up or store donated drug paraphernalia in their distribution centers?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false May SASPs pick up or store donated drug paraphernalia in their distribution centers? 102-41.230 Section 102-41.230 Public Contracts and Property Management Federal Property Management Regulations System (Continued) FEDERAL...

Alternative Fuels Data Center: Vehicle Search

Science.gov Websites

ZeroTruck Search Engines and Hybrid Systems For medium- and heavy-duty vehicles: Engine & Power Sources Hydraulic hybrid Hybrid - CNG Hybrid - Diesel Electric Hybrid - LNG Hybrid Search x Pick Engine Fuel Natural Gas Propane Electric Plug-in Hybrid Electric Hydraulic hybrid Hybrid Search x Pick Engine Fuel

24 CFR 880.608 - Security deposits.

Code of Federal Regulations, 2011 CFR

2011-04-01

... security deposits. (c) In order to be considered for the return of the security deposit, a family which vacates its unit will provide the owner with its forwarding address or arrange to pick up the refund. (d...

24 CFR 880.608 - Security deposits.

Code of Federal Regulations, 2010 CFR

2010-04-01

... security deposits. (c) In order to be considered for the return of the security deposit, a family which vacates its unit will provide the owner with its forwarding address or arrange to pick up the refund. (d...

7 CFR 1412.66 - Acreage and production reports.

Code of Federal Regulations, 2011 CFR

2011-01-01

... tickets, and contemporaneous diaries, as is necessary in order to verify the information provided if the... through retail sales, such as roadside stands, u-pick, etc. and the producer will not be able to certify...

78 FR 16472 - Deposit of Biological Materials

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-15

... and upon issuance as a patent that all restriction to public access is permanently removed. In order... by FedEx ``Domestic Overnight'' is estimated to be $75. If the shipment requires pick-up by FedEx...

7 CFR 1412.66 - Acreage and production reports.

Code of Federal Regulations, 2010 CFR

2010-01-01

... tickets, and contemporaneous diaries, as is necessary in order to verify the information provided if the... through retail sales, such as roadside stands, u-pick, etc. and the producer will not be able to certify...

Design and Development of a High Speed Sorting System Based on Machine Vision Guiding

NASA Astrophysics Data System (ADS)

Zhang, Wenchang; Mei, Jiangping; Ding, Yabin

In this paper, a vision-based control strategy to perform high speed pick-and-place tasks on automation product line is proposed, and relevant control software is develop. Using Delta robot to control a sucker to grasp disordered objects from one moving conveyer and then place them on the other in order. CCD camera gets one picture every time the conveyer moves a distance of ds. Objects position and shape are got after image processing. Target tracking method based on "Servo motor + synchronous conveyer" is used to fulfill the high speed porting operation real time. Experiments conducted on Delta robot sorting system demonstrate the efficiency and validity of the proposed vision-control strategy.

The Impact of Wireless Technology on Order Selection Audits at an Auto Parts Distribution Center

ERIC Educational Resources Information Center

Goomas, David T.

2012-01-01

Audits of store order pallets or totes performed by auditors at five distribution centers (two experimental and three comparison distribution centers) were used to check for picking accuracy prior to being loaded onto a truck for store delivery. Replacing the paper audits with wireless handheld computers that included immediate auditory and visual…

19 CFR 145.12 - Entry of merchandise.

Code of Federal Regulations, 2011 CFR

2011-04-01

... formal entry, even though they reach Customs at the same time and are covered by a single order or contract in excess of $2,000, unless there was a splitting of shipments in order to avoid the payment of... Postal Service for delivery and collection of duty. If the addressee has arranged to pick up such a...

19 CFR 145.12 - Entry of merchandise.

Code of Federal Regulations, 2010 CFR

2010-04-01

... formal entry, even though they reach Customs at the same time and are covered by a single order or contract in excess of $2,000, unless there was a splitting of shipments in order to avoid the payment of... Postal Service for delivery and collection of duty. If the addressee has arranged to pick up such a...

77 FR 24558 - Requested Administrative Waiver of the Coastwise Trade Laws: Vessel STEPPIN UP; Invitation for...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-24

..., pick up and discharge passengers at same ports.'' Geographic Region: ``New York, New Jersey, Delaware... not be granted. Comments should refer to the docket number of this notice and the vessel name in order... 19477-78). By Order of the Maritime Administrator. Dated: April 19, 2012 Julie P. Agarwal, Secretary...

49 CFR 375.505 - Must I write up a bill of lading?

Code of Federal Regulations, 2011 CFR

2011-10-01

... TRANSPORTATION OF HOUSEHOLD GOODS IN INTERSTATE COMMERCE; CONSUMER PROTECTION REGULATIONS Pick Up of Shipments of... combined with an order for service to include all the items required by § 375.501 of this subpart. You must... that was entered on the estimate and order for service. (5) When you transport on a collect-on-delivery...

49 CFR 371.117 - Must I provide individual shippers with my policies concerning cancellation, deposits, and refunds?

Code of Federal Regulations, 2011 CFR

2011-10-01

... event the shipper cancels an order for service before the date an authorized household goods motor carrier has been scheduled to pick up the shipper's property. (b) You must maintain records showing each... include: (1) Proof that the individual shipper cashed or deposited the check or money order, if the...

75 FR 65648 - Notice of Proposed Withdrawal Extension and Opportunity for Public Meeting for the Peony, Pole...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-26

..., Pole Pick, and Frank Burge Seed Orchards; Washington AGENCY: Bureau of Land Management, Interior... of Land Management (BLM) that proposes to extend the duration of Public Land Order (PLO) No. 6952 for... land from location and entry under the United States mining laws in order to protect the integrity and...

77 FR 66479 - Public Land Order No. 7805; Extension of Public Land Order No. 6952; WA

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-05

...-year period. The extension is necessary to continue protection of the tree improvement and forest... telecommunications device for the deaf (TDD) may call the Federal Information Relay Service (FIRS) at 1-800- 877-8339... withdrawal was first made requires this extension to continue protection of the Peony, Pole Pick, and Frank...

Patient request for pharmacist counseling and satisfaction: Automated prescription delivery system versus regular pick-up counter.

PubMed

Hirsch, Jan D; Oen, Austin; Robertson, Suzie; Nguyen, Nancy; Daniels, Charles

2009-01-01

To assess the rate of patient-requested pharmacist counseling for refill prescriptions and satisfaction with pick-up process for patients using an automated prescription delivery system (APDS) versus those using a regular pick-up counter and to explore patient willingness to use an APDS as a tool for pharmacist monitoring of medication therapy outcomes. In this uncontrolled, cross-sectional, survey study, we assessed use of APDS or the regular counter by 116 patients picking up refill prescriptions at two community pharmacies. The main outcome measures were number of patients requesting pharmacist counseling for refill prescriptions, patient satisfaction with pick-up process, and patient willingness to use an APDS to report medication therapy outcomes. None of the regular counter users and only two APDS users (3.7%) requested counseling for their refill prescription (P = 0.126). Almost all patients agreed that they were able to talk to a pharmacist about their prescription if they wanted to do so (95.1% regular counter and 92.3% APDS; P = 0.268). The majority (75%) of patients using APDS indicated that they would be willing to use the system to answer questions or perform simple tests to provide information that the pharmacist could use to improve medication effectiveness or reduce adverse effects. Very few patients (ADPS or regular counter) asked to speak to a pharmacist about their refill medications, although it appeared that no perceived barriers to pharmacist access existed. Most APDS patients were willing to use this new technology to provide information about therapy outcomes to the pharmacist. Further exploration and testing of the APDS as a data collection tool to enhance pharmacist access to therapy outcomes is warranted.

Non-Abelian Geometric Phases Carried by the Quantum Noise Matrix

NASA Astrophysics Data System (ADS)

Bharath, H. M.; Boguslawski, Matthew; Barrios, Maryrose; Chapman, Michael

2017-04-01

Topological phases of matter are characterized by topological order parameters that are built using Berry's geometric phase. Berry's phase is the geometric information stored in the overall phase of a quantum state. We show that geometric information is also stored in the second and higher order spin moments of a quantum spin system, captured by a non-abelian geometric phase. The quantum state of a spin-S system is uniquely characterized by its spin moments up to order 2S. The first-order spin moment is the spin vector, and the second-order spin moment represents the spin fluctuation tensor, i.e., the quantum noise matrix. When the spin vector is transported along a loop in the Bloch ball, we show that the quantum noise matrix picks up a geometric phase. Considering spin-1 systems, we formulate this geometric phase as an SO(3) operator. Geometric phases are usually interpreted in terms of the solid angle subtended by the loop at the center. However, solid angles are not well defined for loops that pass through the center. Here, we introduce a generalized solid angle which is well defined for all loops inside the Bloch ball, in terms of which, we interpret the SO(3) geometric phase. This geometric phase can be used to characterize topological spin textures in cold atomic clouds.

12 CFR 1202.7 - How will FHFA respond to my FOIA request?

Code of Federal Regulations, 2010 CFR

2010-01-01

... order in which they are received. If FHFA determines while processing your Standard Track request, that... expedited delivery service fees or to pick up records at our office. (f) Extensions of Time. In unusual...

18 CFR 367.4160 - Account 416, Costs and expenses of merchandising, jobbing and contract work.

Code of Federal Regulations, 2011 CFR

2011-04-01

...) Receiving and handling customer orders for merchandise or for jobbing services. (7) Cleaning and tidying... sales rooms or of equipment. (10) Transportation expense in delivery and pick-up of appliances by the...

12 CFR 1202.7 - How will FHFA respond to my FOIA request?

Code of Federal Regulations, 2011 CFR

2011-01-01

... order in which they are received. If FHFA determines while processing your Standard Track request, that... expedited delivery service fees or to pick up records at our office. (f) Extensions of Time. In unusual...

7 CFR 301.80 - Quarantine; restriction on interstate movement of specified regulated articles.

Code of Federal Regulations, 2011 CFR

2011-01-01

... States of North Carolina and South Carolina in order to prevent the spread of witchweed (Striga spp.), a...) Sorghum. (18) Used crates, boxes, burlap bags, and cotton-picking sacks, and other used farm products...

7 CFR 301.80 - Quarantine; restriction on interstate movement of specified regulated articles.

Code of Federal Regulations, 2010 CFR

2010-01-01

... States of North Carolina and South Carolina in order to prevent the spread of witchweed (Striga spp.), a...) Sorghum. (18) Used crates, boxes, burlap bags, and cotton-picking sacks, and other used farm products...

The assessment of skin picking in adolescence: psychometric properties of the Skin Picking Scale-Revised (German version).

PubMed

Gallinat, Christina; Keuthen, Nancy J; Stefini, Annette; Backenstrass, Matthias

2017-02-01

Skin picking disorder has received growing attention since the release of DSM-5, yet there are no evidence-based assessment instruments for adolescent samples. The present study examines the psychometric properties of the Skin Picking Scale-Revised (SPS-R, German version) in adolescents. A total of 76 adolescents (96% female) completed the SPS-R, the Clinical Psychological Diagnostic System (KPD-38), and a questionnaire assessing demographics and clinical characteristics online. The SPS-R had high internal consistency (α = 0.89) and significant small-to-medium correlations with reduced competence skills, psychological impairment, general life satisfaction, social support, and social problems on the KPD-38. Similar to prior findings for adults, an exploratory factor analysis suggested a two-factor model for the SPS-R in adolescents. Group comparisons failed to show significant differences on SPS-R scores between participants with and without dermatological conditions. The current results suggest that the SPS-R can be useful in adolescent samples as a reliable and valid instrument for the assessment of skin picking severity. Future research investigating scale validity and factor structure in a clinical sample of adolescent skin pickers is warranted.

78 FR 21189 - Petition for Exemption From the Vehicle Theft Prevention Standard; BMW of North America, LLC

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-09

... must be recognized by the EWS/CAS control unit in order for the vehicle to start. The transponder... in the mechanical keys make the locks almost impossible to pick and the keys impossible to duplicate... description of the antitheft device is necessary in order to notify law enforcement agencies of new vehicle...

65. September 1913 "No. 100. Sprinkling dirt over oil surface ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

65. September 1913 "No. 100. Sprinkling dirt over oil surface of dirt roads preparatory to rolling. This was necessary in order to keep roller from picking up asphaltic oils." - Crater Lake National Park Roads, Klamath Falls, Klamath County, OR

75 FR 49015 - Future of Aviation Advisory Committee (FAAC); Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-12

... (CTA) Blue Line River Road, Rosemont exit. PACE Bus Service, Route 230, picks up from River Road... [cir] U.S. Citizen (Y/N) [cir] E-mail address in order for us to confirm your registration The Federal...

Thickness of the Descending Philippine Sea Plate Estimated from Tomographic Images beneath the Kumano Basin, along the Nankai Trough, Southwestern Japan

NASA Astrophysics Data System (ADS)

Kamiya, S.; Suzuki, K.; Takahashi, N.

2015-12-01

The Philippine Sea plate subducts northwestward beneath the Japanese islands from the south. The average thickness of the overall Philippine Sea plate has been investigated in the oceanic area using surface wave analyses [e.g. Abe and Kanamori, 1970], suggesting a thin (30-40 km thick) plate. On the other hand, several studies have indicated a thicker Philippine Sea plate based on source mechanisms and seismicity in the eastern rim of the plate [Seno, 1987; Moriyama et al., 1989]. From tomographic images, Kamiya and Kobayashi [2007] pointed out that the subducting Philippine Sea slab has thickness variation with a stepwise offset east of Izu Peninsula. The eastern (the Kanto district) and western (north of Izu Peninsula and the Tokai district) regions have respective thicknesses of 60 and 25 km. In the Kumano basin, the Japan Agency for Marine-Earth Science and Technology (JAMSTEC) developed the Dense Oceanfloor Network System for Earthquakes and Tsunami (DONET) in order to monitor seismic activity [Kaneda et al., 2009; Kawaguchi et al., 2010]. DONET ocean-bottom stations are connected with an optical fiber cable, and data are transferred in real time to our laboratory at JAMSTEC. The present study obtains three-dimensional P-wave and S-wave seismic velocity models beneath the Kumano basin by employing an travel time tomography technique. We pick arrival times of P and S waves from the waveform data recorded by the DONET system during the period from January 2011 to December 2014. In order to improve the resolution in the deeper regions than the seismic area inside of the descending slab, we also pick arrival times from the seismic events occurred outside of this district. We use these picked arrival times adding to the JMA catalogue data in seismic tomography. From the obtained tomographic images, we find high velocity anomalies corresponding to the descending Philippine Sea slab. We also find low velocity anomalies under the high velocity slab clearly. There seems to be a sharp velocity contrast between the anomalies. We can estimate the thickness of the descending slab at about 30 km, which is almost consistent with the thickness beneath the Tokai district estimated by Kamiya and Kobayashi [2007] and comparable to the effective elastic thickness beneath the eastern part of the Shikoku basin estimated by Yoshioka and Ito [2001].

Instrumented Pick Detects Coal/Rock Interface

NASA Technical Reports Server (NTRS)

Wu, T.; Erkes, J. W.

1983-01-01

Instrumented pick installed on cutting drum of coal shearer for longwall mining measures cutting force with strain-gage-bridge load cell. Force signal transmitted to remote recorder. Transmitter located in base of pick assembly. Antenna located in shadow of rotating pick. Changes in characteristics of force signals from pick used to determine whether pick is cutting coal or rock.

Evaluation of manhole inserts as structural barriers to mosquito entry into belowground stormwater systems using a simulated treatment device.

PubMed

Harbison, Justin E; Metzger, Marco E; Allen, Vaikko; Hu, Renjie

2009-09-01

Belowground proprietary stormwater treatment devices can produce mosquitoes, including vectors of West Nile virus. Elimination of vertical entry points such as pick holes in manhole covers may reduce the number of mosquitoes entering and reproducing in these structures. Plastic manhole dish inserts were evaluated as structural barriers against mosquito entry through pick holes in a simulated stormwater treatment device. Inserts were 100% effective at preventing mosquito entry through covers when no other openings existed. In devices configured with an open lateral conveyance pipe, the addition of an insert under the cover reduced mosquito oviposition significantly. Subsequent trials to further elucidate mosquito entry through manhole covers found a significant positive correlation between increasing number of pick holes and mosquito oviposition. Results of the study suggest the potential for manhole dish inserts to decrease the number of mosquitoes entering belowground structures. The different available stormwater treatment systems and site-specific installations may, however, provide a much greater variety of possible alternate entry points for mosquitoes than was addressed in the current study. Further work is needed in field installations to quantify the significance of pick holes to mosquito entry and determine under what conditions, if any, manhole dish inserts would be most effective and appropriate.

Micro-assembly of three-dimensional rotary MEMS mirrors

NASA Astrophysics Data System (ADS)

Wang, Lidai; Mills, James K.; Cleghorn, William L.

2009-02-01

We present a novel approach to construct three-dimensional rotary micro-mirrors, which are fundamental components to build 1×N or N×M optical switching systems. A rotary micro-mirror consists of two microparts: a rotary micro-motor and a micro-mirror. Both of the two microparts are fabricated with PolyMUMPs, a surface micromachining process. A sequential robotic microassembly process is developed to join the two microparts together to construct a threedimensional device. In order to achieve high positioning accuracy and a strong mechanical connection, the micro-mirror is joined to the micro-motor using an adhesive mechanical fastener. The mechanical fastener has self-alignment ability and provides a temporary joint between the two microparts. The adhesive bonding can create a strong permanent connection, which does not require extra supporting plates for the micro-mirror. A hybrid manipulation strategy, which includes pick-and-place and pushing-based manipulations, is utilized to manipulation the micro-mirror. The pick-andplace manipulation has the ability to globally position the micro-mirror in six degrees of freedom. The pushing-based manipulation can achieve high positioning accuracy. This microassembly approach has great flexibility and high accuracy; furthermore, it does not require extra supporting plates, which greatly simplifies the assembly process.

20 CFR 345.302 - Definition of terms and phrases used in experience-rating.

Code of Federal Regulations, 2011 CFR

2011-04-01

... pooled charge ratio thus picks up the cost of benefits paid to employees of employers whose rate of... raised in order to bring that rate to the minimum rate of zero is multiplied by the employer's 1-year...

29 CFR 794.128 - Sales made to out-of-State customers.

Code of Federal Regulations, 2011 CFR

2011-07-01

... made to an out-of-State customer is a question of fact. In order for a customer to be considered an out... exist, for example, where an out-of-State company in the regular course of dealing picks up the...

Automatic seed picking for brachytherapy postimplant validation with 3D CT images.

PubMed

Zhang, Guobin; Sun, Qiyuan; Jiang, Shan; Yang, Zhiyong; Ma, Xiaodong; Jiang, Haisong

2017-11-01

Postimplant validation is an indispensable part in the brachytherapy technique. It provides the necessary feedback to ensure the quality of operation. The ability to pick implanted seed relates directly to the accuracy of validation. To address it, an automatic approach is proposed for picking implanted brachytherapy seeds in 3D CT images. In order to pick seed configuration (location and orientation) efficiently, the approach starts with the segmentation of seed from CT images using a thresholding filter which based on gray-level histogram. Through the process of filtering and denoising, the touching seed and single seed are classified. The true novelty of this approach is found in the application of the canny edge detection and improved concave points matching algorithm to separate touching seeds. Through the computation of image moments, the seed configuration can be determined efficiently. Finally, two different experiments are designed to verify the performance of the proposed approach: (1) physical phantom with 60 model seeds, and (2) patient data with 16 cases. Through assessment of validated results by a medical physicist, the proposed method exhibited promising results. Experiment on phantom demonstrates that the error of seed location and orientation is within ([Formula: see text]) mm and ([Formula: see text])[Formula: see text], respectively. In addition, the most seed location and orientation error is controlled within 0.8 mm and 3.5[Formula: see text] in all cases, respectively. The average process time of seed picking is 8.7 s per 100 seeds. In this paper, an automatic, efficient and robust approach, performed on CT images, is proposed to determine the implanted seed location as well as orientation in a 3D workspace. Through the experiments with phantom and patient data, this approach also successfully exhibits good performance.

ActiveSeismoPick3D - automatic first arrival determination for large active seismic arrays

NASA Astrophysics Data System (ADS)

Paffrath, Marcel; Küperkoch, Ludger; Wehling-Benatelli, Sebastian; Friederich, Wolfgang

2016-04-01

We developed a tool for automatic determination of first arrivals in active seismic data based on an approach, that utilises higher order statistics (HOS) and the Akaike information criterion (AIC), commonly used in seismology, but not in active seismics. Automatic picking is highly desirable in active seismics as the number of data provided by large seismic arrays rapidly exceeds of what an analyst can evaluate in a reasonable amount of time. To bring the functionality of automatic phase picking into the context of active data, the software package ActiveSeismoPick3D was developed in Python. It uses a modified algorithm for the determination of first arrivals which searches for the HOS maximum in unfiltered data. Additionally, it offers tools for manual quality control and postprocessing, e.g. various visualisation and repicking functionalities. For flexibility, the tool also includes methods for the preparation of geometry information of large seismic arrays and improved interfaces to the Fast Marching Tomography Package (FMTOMO), which can be used for the prediction of travel times and inversion for subsurface properties. Output files are generated in the VTK format, allowing the 3D visualization of e.g. the inversion results. As a test case, a data set consisting of 9216 traces from 64 shots was gathered, recorded at 144 receivers deployed in a regular 2D array of a size of 100 x 100 m. ActiveSeismoPick3D automatically checks the determined first arrivals by a dynamic signal to noise ratio threshold. From the data a 3D model of the subsurface was generated using the export functionality of the package and FMTOMO.

East Pacific Rise axial structure from a joint tomographic inversion of traveltimes picked on downward continued and standard shot gathers collected by 3D MCS surveying

NASA Astrophysics Data System (ADS)

Newman, Kori; Nedimović, Mladen; Delescluse, Matthias; Menke, William; Canales, J. Pablo; Carbotte, Suzanne; Carton, Helene; Mutter, John

2010-05-01

We present traveltime tomographic models along closely spaced (~250 m), strike-parallel profiles that flank the axis of the East Pacific Rise at 9°41' - 9°57' N. The data were collected during a 3D (multi-streamer) multichannel seismic (MCS) survey of the ridge. Four 6-km long hydrophone streamers were towed by the ship along three along-axis sail lines, yielding twelve possible profiles over which to compute tomographic models. Based on the relative location between source-receiver midpoints and targeted subsurface structures, we have chosen to compute models for four of those lines. MCS data provide for a high density of seismic ray paths with which to constrain the model. Potentially, travel times for ~250,000 source-receiver pairs can be picked over the 30 km length of each model. However, such data density does not enhance the model resolution, so, for computational efficiency, the data are decimated so that ~15,000 picks per profile are used. Downward continuation of the shot gathers simulates an experimental geometry in which the sources and receivers are positioned just above the sea floor. This allows the shallowest sampling refracted arrivals to be picked and incorporated into the inversion whereas they would otherwise not be usable with traditional first-arrival travel-time tomographic techniques. Some of the far-offset deep-penetrating 2B refractions cannot be picked on the downward continued gathers due to signal processing artifacts. For this reason, we run a joint inversion by also including 2B traveltime picks from standard shot gathers. Uppermost velocity structure (seismic layer 2A thickness and velocity) is primarily constrained from 1D inversion of the nearest offset (<500 m) source-receiver travel-time picks for each downward continued shot gather. Deeper velocities are then computed in a joint 2D inversion that uses all picks from standard and downward continued shot gathers and incorporates the 1D results into the starting model. The resulting velocity models extend ~1 km into the crust. Preliminary results show thicker layer 2A and faster layer 2A velocities at fourth order ridge segment boundaries. Additionally, layer 2A thickens north of 9° 52' N, which is consistent with earlier investigations of this ridge segment. Slower layer 2B velocities are resolved in the vicinity of documented hydrothermal vent fields. We anticipate that additional analyses of the results will yield further insight into fine scale variations in near-axis mid-ocean ridge structure.

Longwall Guidance and Control Development

NASA Technical Reports Server (NTRS)

1982-01-01

The longwall guidance and control (G&C) system was evaluated to determine which systems and subsystems lent themselves to automatic control in the mining of coal. The upper coal/shale interface was identified as the reference for a vertical G&C system, with two sensors (the natural backgound and the sensitized pick) being used to locate and track this boundary. In order to insure a relatively smooth recession surface (roof and floor of the excavated seam), a last and present cut measuring instrument (acoustic sensor) was used. Potentiometers were used to measure elevations of the shearer arms. The intergration of these components comprised the vertical control system (pitch control). Yaw and roll control were incorporated into a face alignment system which was designed to keep the coal face normal to its external boundaries. Numerous tests, in the laboratory and in the field, have confirmed the feasibility of automatic horizon control, as well as determining the face alignment.

Method and system rapid piece handling

DOEpatents

Spletzer, Barry L.

1996-01-01

The advent of high-speed fabric cutters has made necessary the development of automated techniques for the collection and sorting of garment pieces into collated piles of pieces ready for assembly. The present invention enables a new method for such handling and sorting of garment parts, and to apparatus capable of carrying out this new method. The common thread is the application of computer-controlled shuttling bins, capable of picking up a desired piece of fabric and dropping it in collated order for assembly. Such apparatus with appropriate computer control relieves the bottleneck now presented by the sorting and collation procedure, thus greatly increasing the overall rate at which garments can be assembled.

pick_xwell, a program for interactive picking of crosswell seismic and radar data

USGS Publications Warehouse

Ellefsen, K.J.

1999-01-01

travel times can be plotted on the computer screen or printed to a file in postscript format. The program is written in the IDL programming language, and it is executed, in command-line mode, within the IDL program. The IDL program must be run from an X-window terminal that is connected to a computer with the Unix operating system. The data must be in the SU format.

Seismicity Along the Endeavour Segment of the Juan de Fuca Ridge: Automated Event Locations for an Ocean-Bottom Seismometer Network

NASA Astrophysics Data System (ADS)

Weekly, R. T.; Wilcock, W. S.; Hooft, E. E.; Toomey, D. R.; McGill, P. R.

2004-12-01

From 2003-2006, the W.M. Keck Foundation supported the operation of a network of eight ocean-bottom seismometers (OBSs) that were deployed with a remotely operated vehicle along the central portion of the Endeavour Segment of the Juan de Fuca mid-ocean ridge as part of a multidisciplinary prototype NEPTUNE experiment. Data from 2003-2004 were initially analyzed during a research apprenticeship class at the University of Washington's Friday Harbor Laboratories. Eight student analysts located ~13,000 earthquakes along the Endeavour Segment. Analysis of data from 2004-2005 has to date been limited to locating ~6,000 earthquakes associated with a swarm in February-March 2005 near the northern end of the Endeavour Segment. The remaining data includes several significant swarms and it is anticipated that tens of thousands of earthquakes still need to be located. In order to efficiently obtain a complete catalog of high-quality locations for the 3-year experiment, we are developing an automatic method for earthquake location. We first apply a 5-Hz high-pass filter and identify triggers when the ratio of the root-mean square (RMS) amplitudes in short- and long- term windows exceeds a specified threshold. We search for events that are characterized by triggers within a short time interval on the majority of stations and use the signal spectra to eliminate events that are the result of 20-Hz Fin and Blue whale vocalizations. An autoregressive technique is applied to a short time window centered on the trigger time to pick P-wave times on each station's vertical channel. We locate the earthquake with these picks and either attempt to repick or eliminate arrivals with unacceptable residuals. Preliminary S-wave picks are then made on the horizontal channels by applying a 5-12 Hz bandpass filter, identifying the peak RMS amplitude for a short running window, and making a pick at the time the RMS amplitude rises above 50% of this value. The picks are refined using the autoregressive technique. We then locate earthquakes using the P- and S-wave picks and either repick or discard S-wave picks with unacceptable residuals before obtaining the final location. We have tested the method using data segments from 2003-2004 and find the catalog completeness and quality of locations is comparable to that obtained with the student analysts.

Seismicity Along the Endeavour Segment of the Juan de Fuca Ridge: Automated Event Locations for an Ocean-Bottom Seismometer Network

NASA Astrophysics Data System (ADS)

Weekly, R. T.; Wilcock, W. S.; Hooft, E. E.; Toomey, D. R.; McGill, P. R.

2007-12-01

From 2003-2006, the W.M. Keck Foundation supported the operation of a network of eight ocean-bottom seismometers (OBSs) that were deployed with a remotely operated vehicle along the central portion of the Endeavour Segment of the Juan de Fuca mid-ocean ridge as part of a multidisciplinary prototype NEPTUNE experiment. Data from 2003-2004 were initially analyzed during a research apprenticeship class at the University of Washington's Friday Harbor Laboratories. Eight student analysts located ~13,000 earthquakes along the Endeavour Segment. Analysis of data from 2004-2005 has to date been limited to locating ~6,000 earthquakes associated with a swarm in February-March 2005 near the northern end of the Endeavour Segment. The remaining data includes several significant swarms and it is anticipated that tens of thousands of earthquakes still need to be located. In order to efficiently obtain a complete catalog of high-quality locations for the 3-year experiment, we are developing an automatic method for earthquake location. We first apply a 5-Hz high-pass filter and identify triggers when the ratio of the root-mean square (RMS) amplitudes in short- and long- term windows exceeds a specified threshold. We search for events that are characterized by triggers within a short time interval on the majority of stations and use the signal spectra to eliminate events that are the result of 20-Hz Fin and Blue whale vocalizations. An autoregressive technique is applied to a short time window centered on the trigger time to pick P-wave times on each station's vertical channel. We locate the earthquake with these picks and either attempt to repick or eliminate arrivals with unacceptable residuals. Preliminary S-wave picks are then made on the horizontal channels by applying a 5-12 Hz bandpass filter, identifying the peak RMS amplitude for a short running window, and making a pick at the time the RMS amplitude rises above 50% of this value. The picks are refined using the autoregressive technique. We then locate earthquakes using the P- and S-wave picks and either repick or discard S-wave picks with unacceptable residuals before obtaining the final location. We have tested the method using data segments from 2003-2004 and find the catalog completeness and quality of locations is comparable to that obtained with the student analysts.

High-density near-field optical disc recording using phase change media and polycarbonate substrate

NASA Astrophysics Data System (ADS)

Shinoda, Masataka; Saito, Kimihiro; Ishimoto, Tsutomu; Kondo, Takao; Nakaoki, Ariyoshi; Furuki, Motohiro; Takeda, Minoru; Akiyama, Yuji; Shimouma, Takashi; Yamamoto, Masanobu

2004-09-01

We developed a high density near field optical recording disc system with a solid immersion lens and two laser sources. In order to realize the near field optical recording, we used a phase change recording media and a molded polycarbonate substrate. The near field optical pick-up consists of a solid immersion lens with numerical aperture of 1.84. The clear eye pattern of 90.2 GB capacity (160nm track pitch and 62 nm per bit) was observed. The jitter using a limit equalizer was 10.0 % without cross-talk. The bit error rate using an adaptive PRML with 8 taps was 3.7e-6 without cross-talk. We confirmed that the near field optical disc system is a promising technology for a next generation high density optical disc system.

A Feasibility Study for Perioperative Ventricular Tachycardia Prognosis and Detection and Noise Detection Using a Neural Network and Predictive Linear Operators

NASA Technical Reports Server (NTRS)

Moebes, T. A.

1994-01-01

To locate the accessory pathway(s) in preexicitation syndromes, epicardial and endocardial ventricular mapping is performed during anterograde ventricular activation via accessory pathway(s) from data originally received in signal form. As the number of channels increases, it is pertinent that more automated detection of coherent/incoherent signals is achieved as well as the prediction and prognosis of ventricular tachywardia (VT). Today's computers and computer program algorithms are not good in simple perceptual tasks such as recognizing a pattern or identifying a sound. This discrepancy, among other things, has been a major motivating factor in developing brain-based, massively parallel computing architectures. Neural net paradigms have proven to be effective at pattern recognition tasks. In signal processing, the picking of coherent/incoherent signals represents a pattern recognition task for computer systems. The picking of signals representing the onset ot VT also represents such a computer task. We attacked this problem by defining four signal attributes for each potential first maximal arrival peak and one signal attribute over the entire signal as input to a back propagation neural network. One attribute was the predicted amplitude value after the maximum amplitude over a data window. Then, by using a set of known (user selected) coherent/incoherent signals, and signals representing the onset of VT, we trained the back propagation network to recognize coherent/incoherent signals, and signals indicating the onset of VT. Since our output scheme involves a true or false decision, and since the output unit computes values between 0 and 1, we used a Fuzzy Arithmetic approach to classify data as coherent/incoherent signals. Furthermore, a Mean-Square Error Analysis was used to determine system stability. The neural net based picking coherent/incoherent signal system achieved high accuracy on picking coherent/incoherent signals on different patients. The system also achieved a high accuracy of picking signals which represent the onset of VT, that is, VT immediately followed these signals. A special binary representation of the input and output data allowed the neural network to train very rapidly as compared to another standard decimal or normalized representations of the data.

Embedded pitch adapters: A high-yield interconnection solution for strip sensors

NASA Astrophysics Data System (ADS)

Ullán, M.; Allport, P. P.; Baca, M.; Broughton, J.; Chisholm, A.; Nikolopoulos, K.; Pyatt, S.; Thomas, J. P.; Wilson, J. A.; Kierstead, J.; Kuczewski, P.; Lynn, D.; Hommels, L. B. A.; Fleta, C.; Fernandez-Tejero, J.; Quirion, D.; Bloch, I.; Díez, S.; Gregor, I. M.; Lohwasser, K.; Poley, L.; Tackmann, K.; Hauser, M.; Jakobs, K.; Kuehn, S.; Mahboubi, K.; Mori, R.; Parzefall, U.; Clark, A.; Ferrere, D.; Gonzalez Sevilla, S.; Ashby, J.; Blue, A.; Bates, R.; Buttar, C.; Doherty, F.; McMullen, T.; McEwan, F.; O'Shea, V.; Kamada, S.; Yamamura, K.; Ikegami, Y.; Nakamura, K.; Takubo, Y.; Unno, Y.; Takashima, R.; Chilingarov, A.; Fox, H.; Affolder, A. A.; Casse, G.; Dervan, P.; Forshaw, D.; Greenall, A.; Wonsak, S.; Wormald, M.; Cindro, V.; Kramberger, G.; Mandić, I.; Mikuž, M.; Gorelov, I.; Hoeferkamp, M.; Palni, P.; Seidel, S.; Taylor, A.; Toms, K.; Wang, R.; Hessey, N. P.; Valencic, N.; Hanagaki, K.; Dolezal, Z.; Kodys, P.; Bohm, J.; Mikestikova, M.; Bevan, A.; Beck, G.; Milke, C.; Domingo, M.; Fadeyev, V.; Galloway, Z.; Hibbard-Lubow, D.; Liang, Z.; Sadrozinski, H. F.-W.; Seiden, A.; To, K.; French, R.; Hodgson, P.; Marin-Reyes, H.; Parker, K.; Jinnouchi, O.; Hara, K.; Bernabeu, J.; Civera, J. V.; Garcia, C.; Lacasta, C.; Marti i Garcia, S.; Rodriguez, D.; Santoyo, D.; Solaz, C.; Soldevila, U.

2016-09-01

A proposal to fabricate large area strip sensors with integrated, or embedded, pitch adapters is presented for the End-cap part of the Inner Tracker in the ATLAS experiment. To implement the embedded pitch adapters, a second metal layer is used in the sensor fabrication, for signal routing to the ASICs. Sensors with different embedded pitch adapters have been fabricated in order to optimize the design and technology. Inter-strip capacitance, noise, pick-up, cross-talk, signal efficiency, and fabrication yield have been taken into account in their design and fabrication. Inter-strip capacitance tests taking into account all channel neighbors reveal the important differences between the various designs considered. These tests have been correlated with noise figures obtained in full assembled modules, showing that the tests performed on the bare sensors are a valid tool to estimate the final noise in the full module. The full modules have been subjected to test beam experiments in order to evaluate the incidence of cross-talk, pick-up, and signal loss. The detailed analysis shows no indication of cross-talk or pick-up as no additional hits can be observed in any channel not being hit by the beam above 170 mV threshold, and the signal in those channels is always below 1% of the signal recorded in the channel being hit, above 100 mV threshold. First results on irradiated mini-sensors with embedded pitch adapters do not show any change in the interstrip capacitance measurements with only the first neighbors connected.

Multivariate Statistics Applied to Seismic Phase Picking

NASA Astrophysics Data System (ADS)

Velasco, A. A.; Zeiler, C. P.; Anderson, D.; Pingitore, N. E.

2008-12-01

The initial effort of the Seismogram Picking Error from Analyst Review (SPEAR) project has been to establish a common set of seismograms to be picked by the seismological community. Currently we have 13 analysts from 4 institutions that have provided picks on the set of 26 seismograms. In comparing the picks thus far, we have identified consistent biases between picks from different institutions; effects of the experience of analysts; and the impact of signal-to-noise on picks. The institutional bias in picks brings up the important concern that picks will not be the same between different catalogs. This difference means less precision and accuracy when combing picks from multiple institutions. We also note that depending on the experience level of the analyst making picks for a catalog the error could fluctuate dramatically. However, the experience level is based off of number of years in picking seismograms and this may not be an appropriate criterion for determining an analyst's precision. The common data set of seismograms provides a means to test an analyst's level of precision and biases. The analyst is also limited by the quality of the signal and we show that the signal-to-noise ratio and pick error are correlated to the location, size and distance of the event. This makes the standard estimate of picking error based on SNR more complex because additional constraints are needed to accurately constrain the measurement error. We propose to extend the current measurement of error by adding the additional constraints of institutional bias and event characteristics to the standard SNR measurement. We use multivariate statistics to model the data and provide constraints to accurately assess earthquake location and measurement errors.

The relationship between emotion regulation strategies, personality traits and skin picking behaviours in a non-clinical sample of Polish adults.

PubMed

Prochwicz, Katarzyna; Kłosowska, Joanna; Kałużna-Wielobób, Alina

2018-06-01

Although skin-picking is a relatively common behaviour, data concerning factors which underlie skin-picking severity and functional impairment caused by picking are still limited. In the present study we examined whether some emotion regulation strategies (cognitive reappraisal and expressive suppression) and personality features influence skin-picking in a university sample; the moderating role of personality traits in the relationship between emotion regulation strategies and skin-picking was also considered. A total sample of 252 adults (mean age 24.03; SD = 5.66) completed the Skin-Picking Scale-Revised, Temperament and Character Inventory and Emotion Regulation Questionnaire. The linear regression analyses indicated that the use of cognitive reappraisal as emotion regulation strategy decrease skin-picking severity. Reduced novelty seeking and reduced self-directedness were identified as significant predictors of skin-picking severity, whereas decreased self-directedness and elevated cooperativeness predicted functional impairment caused by skin-picking. Further moderation analysis revealed that cognitive reappraisal decreases skin-picking severity only among individuals with low and moderate novelty seeking, however, not among those with high novelty seeking. These results indicate that emotion regulation strategies and specific personality traits are important factors associated with skin-picking behaviours in a university sample. Further research is needed to establish the link between emotion regulation strategies and personality traits in clinical sample. Copyright © 2018 Elsevier B.V. All rights reserved.

The relationship between adolescents' academic stress, impulsivity, anxiety, and skin picking behavior.

PubMed

Yeo, Sun Kyung; Lee, Woo Kyeong

2017-08-01

Skin picking behavior involves an individual picking or biting their skin repeatedly. Although this behavior commonly occurs at a young age, little research has addressed its harmful effects among the Korean population. Therefore, we examined the characteristics of South Korean adolescents who reported skin picking behavior. South Korean students aged 12-16 years participated (N=410, females=52.2%). They completed questionnaires that addressed skin picking behavior, academic stress, impulsivity, and anxiety. The survey was conducted in Seoul and Gyeonggi-do from February-March 2016. Among participants, 66.8% reported that they had picked their skin and 15.4% did so currently. Skin picking was positively correlated with academic stress, impulsivity, and anxiety. Students who picked their skin more often displayed more anxiety, academic stress, and impulsivity. Future studies should address skin picking adolescents' characteristics, especially regarding anxiety and academic stress. Educational programs should be implemented to help adolescents decrease their anxiety and academic stress and prevent the worsening of skin picking behavior. Copyright © 2017 Elsevier B.V. All rights reserved.

Excessive Picking in Prader-Willi Syndrome: A Pilot Study of Phenomenological Aspects and Comorbid Symptoms.

ERIC Educational Resources Information Center

Wigren, Margareta; Heimann, Mikael

2001-01-01

Interviews with parents of 37 individuals (ages 12-30) with Prader-Willi syndrome revealed two-thirds displayed skin picking with a frequency ranging from chronic to transient, episodic symptoms. Many individuals with skin picking also exhibited comorbid picking behaviors And individuals with excessive skin picking also had frequent tantrums and…

PICK1 interacts with ABP/GRIP to regulate AMPA receptor trafficking.

PubMed

Lu, Wei; Ziff, Edward B

2005-08-04

PICK1 and ABP/GRIP bind to the AMPA receptor (AMPAR) GluR2 subunit C terminus. Transfer of the receptor from ABP/GRIP to PICK1, facilitated by GluR2 S880 phosphorylation, may initiate receptor trafficking. Here we report protein interactions that regulate these steps. The PICK1 BAR domain interacts intermolecularly with the ABP/GRIP linker II region and intramolecularly with the PICK1 PDZ domain. Binding of PKCalpha or GluR2 to the PICK1 PDZ domain disrupts the intramolecular interaction and facilitates the PICK1 BAR domain association with ABP/GRIP. Interference with the PICK1-ABP/GRIP interaction impairs S880 phosphorylation of GluR2 by PKC and decreases the constitutive surface expression of GluR2, the NMDA-induced endocytosis of GluR2, and recycling of internalized GluR2. We suggest that the PICK1 interaction with ABP/GRIP is a critical step in controlling GluR2 trafficking.

A new mutation identified in SPATA16 in two globozoospermic patients.

PubMed

ElInati, Elias; Fossard, Camille; Okutman, Ozlem; Ghédir, Houda; Ibala-Romdhane, Samira; Ray, Pierre F; Saad, Ali; Hennebicq, Sylvianne; Viville, Stéphane

2016-06-01

The aim of this study is to identify potential genes involved in human globozoopsermia. Nineteen globozoospermic patients (previously screened for DPY19L2 mutations with no causative mutation) were recruited in this study and screened for mutations in genes implicated in human globozoospermia SPATA16 and PICK1. Using the candidate gene approach and the determination of Spata16 partners by Glutathione S-transferase (GST) pull-down four genes were also selected and screened for mutations. We identified a novel mutation of SPATA16: deletion of 22.6 Kb encompassing the first coding exon in two unrelated Tunisian patients who presented the same deletion breakpoints. The two patients shared the same haplotype, suggesting a possible ancestral founder effect for this new deletion. Four genes were selected using the candidate gene approach and the GST pull-down (GOPC, PICK1, AGFG1 and IRGC) and were screened for mutation, but no variation was identified. The present study confirms the pathogenicity of the SPATA16 mutations. The fact that no variation was detected in the coding sequence of AFGF1, GOPC, PICK1 and IRGC does not mean that they are not involved in human globozoospermia. A larger globozoospermic cohort must be studied in order to accelerate the process of identifying new genes involved in such phenotypes. Until sufficient numbers of patients have been screened, AFGF1, GOPC, PICK1 and IRGC should still be considered as candidate genes.

Divided attention of adolescents related to lifestyles and academic and family conditions.

PubMed

Mizuno, Kei; Tanaka, Masaaki; Fukuda, Sanae; Imai-Matsumura, Kyoko; Watanabe, Yasuyoshi

2013-05-01

Development of the ability to divide attention is of crucial importance in the transitional period from elementary to junior high school. The relationship between divided attention and the prevalence of fatigue or low academic motivation is observed in junior high school students. In order to clarify the factors underlying decreased ability to divide attention, we examined the relationships between divided attention, as assessed by the kana pick-out test, lifestyle factors, and academic and family conditions in junior high school students. The study group consisted of 158 healthy 1st-, 2nd-, and 3rd-grade level junior high school students. Each participant performed the kana pick-out test and questionnaires dealing with lifestyle factors (nocturnal sleeping hours on school days, breakfast, exercise, watching television, and spending time with family members), and academic and family conditions (good friendships at school and praise from family members when participants showed good academic performance). On multiple regression analyses adjusted for grade and gender, scores on the kana pick-out test were positively associated with spending time with family members. In addition, the comprehension score of the kana pick-out test was positively associated with having breakfast every day and praise by family members. The score was negatively associated with watching television. The present findings suggest that the ability to divide attention is independently associated with good lifestyles and academic and family conditions in junior high school students. Copyright © 2012 The Japanese Society of Child Neurology. Published by Elsevier B.V. All rights reserved.

Design and evaluation of pick-up truck mounted boom for elevation of a multiband radiometer system

NASA Technical Reports Server (NTRS)

Bauer, M. E. (Principal Investigator); Tsuchida, R.

1981-01-01

Three concepts were considered for the boom design: a one-piece boom with a trolley, a folding boom, and a telescoping boom. The telescoping boom was selected over the other two concepts because of its easy manual operation. The boom is designed to mount on the bed of a pick-up truck and elevate the radiometer system 8 meters above the ground and 4 meters away from the truck. The selection of the boom components is discussed with justification of the final choice. Results of performance tests and one season's operation of the completed boom are reported.

Types A and B Niemann-Pick disease.

PubMed

Schuchman, Edward H; Wasserstein, Melissa P

2015-03-01

Two distinct metabolic abnormalities are encompassed under the eponym Niemann-Pick disease (NPD). The first is due to the deficient activity of the enzyme acid sphingomyelinase (ASM). Patients with ASM deficiency are classified as having types A and B Niemann-Pick disease (NPD). Type A NPD patients exhibit hepatosplenomegaly in infancy and profound central nervous system involvement. They rarely survive beyond two years of age. Type B patients also have hepatosplenomegaly and pathologic alterations of their lungs, but there are usually no central nervous system signs. The age of onset and rate of disease progression varies greatly among type B patients, and they frequently live into adulthood. Recently, patients with phenotypes intermediate between types A and B NPD also have been identified. These individuals represent the expected continuum caused by inheriting different mutations in the ASM gene (SMPD1). Patients in the second NPD category are designated as having types C and D NPD. These patients may have mild hepatosplenomegaly, but the central nervous system is profoundly affected. Impaired intracellular trafficking of cholesterol causes types C and D NPD, and two distinct gene defects have been found. In this chapter only types A and B NPD will be discussed. Copyright © 2014. Published by Elsevier Ltd.

Design and implementation of an automated compound management system in support of lead optimization.

PubMed

Quintero, Catherine; Kariv, Ilona

2009-06-01

To meet the needs of the increasingly rapid and parallelized lead optimization process, a fully integrated local compound storage and liquid handling system was designed and implemented to automate the generation of assay-ready plates directly from newly submitted and cherry-picked compounds. A key feature of the system is the ability to create project- or assay-specific compound-handling methods, which provide flexibility for any combination of plate types, layouts, and plate bar-codes. Project-specific workflows can be created by linking methods for processing new and cherry-picked compounds and control additions to produce a complete compound set for both biological testing and local storage in one uninterrupted workflow. A flexible cherry-pick approach allows for multiple, user-defined strategies to select the most appropriate replicate of a compound for retesting. Examples of custom selection parameters include available volume, compound batch, and number of freeze/thaw cycles. This adaptable and integrated combination of software and hardware provides a basis for reducing cycle time, fully automating compound processing, and ultimately increasing the rate at which accurate, biologically relevant results can be produced for compounds of interest in the lead optimization process.

Locating single-point sources from arrival times containing large picking errors (LPEs): the virtual field optimization method (VFOM)

NASA Astrophysics Data System (ADS)

Li, Xi-Bing; Wang, Ze-Wei; Dong, Long-Jun

2016-01-01

Microseismic monitoring systems using local location techniques tend to be timely, automatic and stable. One basic requirement of these systems is the automatic picking of arrival times. However, arrival times generated by automated techniques always contain large picking errors (LPEs), which may make the location solution unreliable and cause the integrated system to be unstable. To overcome the LPE issue, we propose the virtual field optimization method (VFOM) for locating single-point sources. In contrast to existing approaches, the VFOM optimizes a continuous and virtually established objective function to search the space for the common intersection of the hyperboloids, which is determined by sensor pairs other than the least residual between the model-calculated and measured arrivals. The results of numerical examples and in-site blasts show that the VFOM can obtain more precise and stable solutions than traditional methods when the input data contain LPEs. Furthermore, we discuss the impact of LPEs on objective functions to determine the LPE-tolerant mechanism, velocity sensitivity and stopping criteria of the VFOM. The proposed method is also capable of locating acoustic sources using passive techniques such as passive sonar detection and acoustic emission.

Virtual Planning, Control, and Machining for a Modular-Based Automated Factory Operation in an Augmented Reality Environment

PubMed Central

Pai, Yun Suen; Yap, Hwa Jen; Md Dawal, Siti Zawiah; Ramesh, S.; Phoon, Sin Ye

2016-01-01

This study presents a modular-based implementation of augmented reality to provide an immersive experience in learning or teaching the planning phase, control system, and machining parameters of a fully automated work cell. The architecture of the system consists of three code modules that can operate independently or combined to create a complete system that is able to guide engineers from the layout planning phase to the prototyping of the final product. The layout planning module determines the best possible arrangement in a layout for the placement of various machines, in this case a conveyor belt for transportation, a robot arm for pick-and-place operations, and a computer numerical control milling machine to generate the final prototype. The robotic arm module simulates the pick-and-place operation offline from the conveyor belt to a computer numerical control (CNC) machine utilising collision detection and inverse kinematics. Finally, the CNC module performs virtual machining based on the Uniform Space Decomposition method and axis aligned bounding box collision detection. The conducted case study revealed that given the situation, a semi-circle shaped arrangement is desirable, whereas the pick-and-place system and the final generated G-code produced the highest deviation of 3.83 mm and 5.8 mm respectively. PMID:27271840

Virtual Planning, Control, and Machining for a Modular-Based Automated Factory Operation in an Augmented Reality Environment.

PubMed

Pai, Yun Suen; Yap, Hwa Jen; Md Dawal, Siti Zawiah; Ramesh, S; Phoon, Sin Ye

2016-06-07

This study presents a modular-based implementation of augmented reality to provide an immersive experience in learning or teaching the planning phase, control system, and machining parameters of a fully automated work cell. The architecture of the system consists of three code modules that can operate independently or combined to create a complete system that is able to guide engineers from the layout planning phase to the prototyping of the final product. The layout planning module determines the best possible arrangement in a layout for the placement of various machines, in this case a conveyor belt for transportation, a robot arm for pick-and-place operations, and a computer numerical control milling machine to generate the final prototype. The robotic arm module simulates the pick-and-place operation offline from the conveyor belt to a computer numerical control (CNC) machine utilising collision detection and inverse kinematics. Finally, the CNC module performs virtual machining based on the Uniform Space Decomposition method and axis aligned bounding box collision detection. The conducted case study revealed that given the situation, a semi-circle shaped arrangement is desirable, whereas the pick-and-place system and the final generated G-code produced the highest deviation of 3.83 mm and 5.8 mm respectively.

Virtual Planning, Control, and Machining for a Modular-Based Automated Factory Operation in an Augmented Reality Environment

NASA Astrophysics Data System (ADS)

Pai, Yun Suen; Yap, Hwa Jen; Md Dawal, Siti Zawiah; Ramesh, S.; Phoon, Sin Ye

2016-06-01

This study presents a modular-based implementation of augmented reality to provide an immersive experience in learning or teaching the planning phase, control system, and machining parameters of a fully automated work cell. The architecture of the system consists of three code modules that can operate independently or combined to create a complete system that is able to guide engineers from the layout planning phase to the prototyping of the final product. The layout planning module determines the best possible arrangement in a layout for the placement of various machines, in this case a conveyor belt for transportation, a robot arm for pick-and-place operations, and a computer numerical control milling machine to generate the final prototype. The robotic arm module simulates the pick-and-place operation offline from the conveyor belt to a computer numerical control (CNC) machine utilising collision detection and inverse kinematics. Finally, the CNC module performs virtual machining based on the Uniform Space Decomposition method and axis aligned bounding box collision detection. The conducted case study revealed that given the situation, a semi-circle shaped arrangement is desirable, whereas the pick-and-place system and the final generated G-code produced the highest deviation of 3.83 mm and 5.8 mm respectively.

A School Leader's Bookshelf.

ERIC Educational Resources Information Center

American School Board Journal, 1999

1999-01-01

The editors of "The American School Board Journal" pick 13 titles noted briefly that represent what they consider the most important, most interesting, most controversial books about children and schools to hit the bookstores this past year. Lists ordering information to obtain a 20% discount from the School Leaders' Book Service. (MLF)

7 CFR 46.43 - Terms construed.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... on the date the order is given or on the date specified in time to be picked up by a train schedule... later than allowed under “today's shipment.” (c) Quick shipment means that the conditions of the offer...

The class characteristic mark of the H&M Mul-T-Lock picking tool in toolmarks examination.

PubMed

Volkov, Nikolai; Finkelstein, Nir; Novoselsky, Yehuda; Tsach, Tsadok

2014-07-01

Mul-T-Lock is a high security lock cylinder distinguished by the use of a telescoping "pin-in-pin"-tumbler design. Picking the Mul-T-Lock cylinder with a traditional picking tool is highly complicated because it can get stuck between the inner and outer pins. The H&M Mul-T-Lock picking tool was designed to overcome this problem and facilitate the picking of the "pin-in-pin" cylinder. The purpose of this research is to determine whether H&M Mul-T-Lock picking tool leaves class characteristic mark and whether it can be distinguished from traditional picking tools marks and from regular key marks. It also describes and determines the class characteristic mark left on telescopic pins, its origin, recurrence, and its benefit to the toolmarks examiner. When receiving a Mul-T-Lock from a crime scene, a toolmarks examiner can quickly determine whether or not it was picked by an H&M Mul-T-Lock picking tool by noticing the class characteristic mark which this typical tool leaves. © 2014 American Academy of Forensic Sciences.

Vision Algorithms to Determine Shape and Distance for Manipulation of Unmodeled Objects

NASA Technical Reports Server (NTRS)

Montes, Leticia; Bowers, David; Lumia, Ron

1998-01-01

This paper discusses the development of a robotic system for general use in an unstructured environment. This is illustrated through pick and place of randomly positioned, un-modeled objects. There are many applications for this project, including rock collection for the Mars Surveyor Program. This system is demonstrated with a Puma560 robot, Barrett hand, Cognex vision system, and Cimetrix simulation and control, all running on a PC. The demonstration consists of two processes: vision system and robotics. The vision system determines the size and location of the unknown objects. The robotics part consists of moving the robot to the object, configuring the hand based on the information from the vision system, then performing the pick/place operation. This work enhances and is a part of the Low Cost Virtual Collaborative Environment which provides remote simulation and control of equipment.

A configurable electronics system for the ESS-Bilbao beam position monitors

NASA Astrophysics Data System (ADS)

Muguira, L.; Belver, D.; Etxebarria, V.; Varnasseri, S.; Arredondo, I.; del Campo, M.; Echevarria, P.; Garmendia, N.; Feuchtwanger, J.; Jugo, J.; Portilla, J.

2013-09-01

A versatile and configurable system has been developed in order to monitorize the beam position and to meet all the requirements of the future ESS-Bilbao Linac. At the same time the design has been conceived to be open and configurable so that it could eventually be used in different kinds of accelerators, independent of the charged particle, with minimal change. The design of the Beam Position Monitors (BPMs) system includes a test bench both for button-type pick-ups (PU) and striplines (SL), the electronic units and the control system. The electronic units consist of two main parts. The first part is an Analog Front-End (AFE) unit where the RF signals are filtered, conditioned and converted to base-band. The second part is a Digital Front-End (DFE) unit which is based on an FPGA board where the base-band signals are sampled in order to calculate the beam position, the amplitude and the phase. To manage the system a Multipurpose Controller (MC) developed at ESSB has been used. It includes the FPGA management, the EPICS integration and Archiver Instances. A description of the system and a comparison between the performance of both PU and SL BPM designs measured with this electronics system are fully described and discussed.

A situated reasoning architecture for space-based repair and replace tasks

NASA Technical Reports Server (NTRS)

Bloom, Ben; Mcgrath, Debra; Sanborn, Jim

1989-01-01

Space-based robots need low level control for collision detection and avoidance, short-term load management, fine-grained motion, and other physical tasks. In addition, higher level control is required to focus strategic decision making as missions are assigned and carried out. Reasoning and control must be responsive to ongoing changes in the environment. Research aimed at bridging the gap between high level artificial intelligence (AI) planning techniques and task-level robot programming for telerobotic systems is described. Situated reasoning is incorporated into AI and Robotics systems in order to coordinate a robot's activity within its environment. An integrated system under development in a component maintenance domain is described. It is geared towards replacing worn and/or failed Orbital Replacement Units (ORUs) designed for use aboard NASA's Space Station Freedom based on the collection of components available at a given time. High level control reasons in component space in order to maximize the number operational component-cells over time, while the task-level controls sensors and effectors, detects collisions, and carries out pick and place tasks in physical space. Situated reasoning is used throughout the system to cope with component failures, imperfect information, and unexpected events.

Types A and B Niemann-Pick Disease.

PubMed

Schuchman, Edward H; Wasserstein, Melissa P

2016-06-01

Two distinct metabolic abnormalities are included under the eponym Niemann-Pick disease (NPD). The first is due to the deficient activity of the enzyme acid sphingomyelinase (ASM). Patients with ASM deficiency are classified as having types A and B Niemann-Pick disease (NPD). Type A NPD patients exhibit hepatosplenomegaly, frequent pulmonary infections, and profound central nervous system involvement in infancy. They rarely survive beyond two years of age. Type B patients also have hepatosplenomegaly and progressive alterations of their lungs, but there are usually no central nervous system signs. The age of onset and rate of disease progression varies greatly among type B patients, and they frequently live into adulthood. Recently, patients with phenotypes intermediate between types A and B NPD also have been identified. These individuals represent the expected continuum caused by inheriting different mutations in the ASM gene (SMPD1). Patients in the second category are designated as having type C NPD. Impaired intracellular trafficking of cholesterol causes type C NPD, and two distinct gene defects have been found. In this chapter only types A and B NPD will be discussed.

A Novel QEPAS with Microresonator in the Open Environment

NASA Astrophysics Data System (ADS)

Lin, Cheng; Zhu, Yong; Wei, Wei; Wang, Ning; Bao, Weiyi

2013-09-01

An improved quartz-enhanced photoacoustic spectroscopy (QEPAS) sensing system for trace gas detection is proposed. The optical fiber Fabry-Perot (F-P) demodulation method is used to replace the conventional electrical one in the QEPAS system. The experimental QEPAS system, which has a microresonator consisting of two stainless steel tubes with a length of 2.3 mm and an inner diameter of 0.9 mm, is implemented to detect the absorption of water vapor in the open environment. The structure parameters of the quartz tuning fork (QTF) are optimized in order to make the sensing system work more stably and reliably. Demonstration experiments are carried out. The vibration signal of the QTF was picked up by the optical fiber F-P demodulator and the conventional electrical scheme at the same time. Normalized noise equivalent absorption coefficients of and are obtained, respectively. The experimental result demonstrates that the sensitivity of the improved QEPAS sensing system with an optical fiber F-P demodulator is about 5.9 times higher than that of the conventional QEPAS system.

A microsphere assembly method with laser microwelding for fabrication of three-dimensional periodic structures

NASA Astrophysics Data System (ADS)

Takagi, Kenta; Omote, Masanori; Kawasaki, Akira

2010-03-01

The orderly build-up of monosized microspheres with sizes of hundreds of micrometres enabled us to develop three-dimensional (3D) photonic crystal devices for terahertz electromagnetic waves. We designed and manufactured an original 3D particle assembly system capable of fabricating arbitrary periodic structures from these spherical particles. This method employs a pick-and-place assembling approach with robotic manipulation and interparticle laser microwelding in order to incorporate a contrivance for highly accurate arraying: an operation that compensates the size deviation of raw monosized particles. Pre-examination of particles of various materials revealed that interparticle laser welding must be achieved with local melting by suppressing heat diffusion from the welding area. By optimizing the assembly conditions, we succeeded in fabricating an accurate periodic structure with a diamond lattice from 400 µm polyethylene composite particles. This structure demonstrated a photonic bandgap in the terahertz frequency range.

Reduced rank models for travel time estimation of low order mode pulses.

PubMed

Chandrayadula, Tarun K; Wage, Kathleen E; Worcester, Peter F; Dzieciuch, Matthew A; Mercer, James A; Andrew, Rex K; Howe, Bruce M

2013-10-01

Mode travel time estimation in the presence of internal waves (IWs) is a challenging problem. IWs perturb the sound speed, which results in travel time wander and mode scattering. A standard approach to travel time estimation is to pulse compress the broadband signal, pick the peak of the compressed time series, and average the peak time over multiple receptions to reduce variance. The peak-picking approach implicitly assumes there is a single strong arrival and does not perform well when there are multiple arrivals due to scattering. This article presents a statistical model for the scattered mode arrivals and uses the model to design improved travel time estimators. The model is based on an Empirical Orthogonal Function (EOF) analysis of the mode time series. Range-dependent simulations and data from the Long-range Ocean Acoustic Propagation Experiment (LOAPEX) indicate that the modes are represented by a small number of EOFs. The reduced-rank EOF model is used to construct a travel time estimator based on the Matched Subspace Detector (MSD). Analysis of simulation and experimental data show that the MSDs are more robust to IW scattering than peak picking. The simulation analysis also highlights how IWs affect the mode excitation by the source.

Thermal Decoherence of a Nonequilibrium Polariton Fluid

NASA Astrophysics Data System (ADS)

Klembt, Sebastian; Stepanov, Petr; Klein, Thorsten; Minguzzi, Anna; Richard, Maxime

2018-01-01

Exciton polaritons constitute a unique realization of a quantum fluid interacting with its environment. Using selenide-based microcavities, we exploit this feature to warm up a polariton condensate in a controlled way and monitor its spatial coherence. We determine directly the amount of heat picked up by the condensate by measuring the phonon-polariton scattering rate and comparing it with the loss rate. We find that, upon increasing the heating rate, the spatial coherence length decreases markedly, while localized phase structures vanish, in good agreement with a stochastic mean-field theory. From the thermodynamical point of view, this regime is unique, as it involves a nonequilibrium quantum fluid with no well-defined temperature but which is nevertheless able to pick up heat with dramatic effects on the order parameter.

CPOE system design aspects and their qualitative effect on usability.

PubMed

Khajouei, Reza; Jaspers, Monique W M

2008-01-01

Although many studies have discussed the benefits of Computerized Provider Order Entry (CPOE) systems, their configuration can have a great impact on clinicians' adoption of these systems. Poorly designed CPOE systems can lead to usability problems, users' dissatisfaction and may disrupt normal flow of clinical activities. This paper reports on a literature review focused on the identification of CPOE medication systems' design aspects that impact CPOE systems' usability and create opportunities for medication errors. Our review is based on a systematic literature search in PubMed, EMBASE and Ovid MEDLINE for relevant publications from 1986-2006. We categorized the design aspects extracted from relevant publications into six different groups: 1) timing of alerts, 2) log in/out procedures, 3) pick lists and drop down menus, 4) clues and guidelines, 5) documentation and data entry options, and 6) screen display and layout. Our review shows that the manner in which a CPOE system is configured can have a high impact on ease of system use, task behavior of clinicians in ordering drugs, and medication errors. Characterization of consequences associated with certain CPOE design aspects provides insight into how CPOE system designs can be improved to enhance physicians' adoption of these systems and their success. Recommendations are provided to enable CPOE system designers to create CPOE systems that are not only more user friendly and efficient but safer.

76 FR 24856 - Heavy Forged Hand Tools (i.e., Axes & Adzes, Bars & Wedges, Hammers & Sledges, and Picks...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-03

... DEPARTMENT OF COMMERCE International Trade Administration [A-570-803] Heavy Forged Hand Tools (i.e... Administration, International Trade Administration, Department of Commerce. SUMMARY: On January 3, 2011, the Department of Commerce (``Department'') initiated a sunset review of the antidumping duty orders on heavy...

Embracing the Humanistic Vision: Recurrent Themes in Peter Roberts' Recent Writings

ERIC Educational Resources Information Center

Reveley, James

2018-01-01

Running like a leitmotif through Peter Roberts' recently published philosophico-educational writings there is a humanistic thread, which this article picks out. In order to ascertain the quality of this humanism, Roberts is positioned in relation to a pair of extant humanisms: radical and integral. Points of comparability and contrast are…

The end-state comfort effect in bimanual grip selection.

PubMed

Fischman, Mark G; Stodden, David F; Lehman, Davana M

2003-03-01

During a unimanual grip selection task in which people pick up a lightweight dowel and place one end against targets at variable heights, the choice of hand grip (overhand vs. underhand) typically depends on the perception of how comfortable the arm will be at the end of the movement: an end-state comfort effect. The two experiments reported here extend this work to bimanual tasks. In each experiment, 26 right-handed participants used their left and right hands to simultaneously pick up two wooden dowels and place either the right or left end against a series of 14 targets ranging from 14 to 210 cm above the floor. These tasks were performed in systematic ascending and descending orders in Experiment 1 and in random order in Expiment 2. Results were generally consistent with predictions of end-state comfort in that, for the extreme highest and lowest targets, participants tended to select opposite grips with each hand. Taken together, our findings are consistent with the concept of constraint hierarchies within a posture-based motion-planning model.

Capacitive beam position monitors for the low-β beam of the Chinese ADS proton linac

NASA Astrophysics Data System (ADS)

Zhang, Yong; Wu, Jun-Xia; Zhu, Guang-Yu; Jia, Huan; Xue, Zong-Heng; Zheng, Hai; Xie, Hong-Ming; Kang, Xin-Cai; He, Yuan; Li, Lin; Denard, Jean Claude

2016-02-01

Beam Position Monitors (BPMs) for the low-β beam of the Chinese Accelerator Driven Subcritical system (CADS) Proton linac are of the capacitive pick-up type. They provide higher output signals than that of the inductive type. This paper will describe the design and tests of the capacitive BPM system for the low-β proton linac, including the pick-ups, the test bench and the read-out electronics. The tests done with an actual proton beam show a good agreement between the measurements and the simulations in the time domain. Supported by National Natural Science Foundation of China (11405240) and “Western Light” Talents Training Program of Chinese Academy of Sciences

Vector sensor for scanning SQUID microscopy

NASA Astrophysics Data System (ADS)

Dang, Vu The; Toji, Masaki; Thanh Huy, Ho; Miyajima, Shigeyuki; Shishido, Hiroaki; Hidaka, Mutsuo; Hayashi, Masahiko; Ishida, Takekazu

2017-07-01

We plan to build a novel 3-dimensional (3D) scanning SQUID microscope with high sensitivity and high spatial resolution. In the system, a vector sensor consists of three SQUID sensors and three pick-up coils realized on a single chip. Three pick-up coils are configured in orthogonal with each other to measure the magnetic field vector of X, Y, Z components. We fabricated some SQUID chips with one uniaxial pick-up coil or three vector pick-up coils and carried out fundamental measurements to reveal the basic characteristics. Josephson junctions (JJs) of sensors are designed to have the critical current density J c of 320 A/cm2, and the critical current I c becomes 12.5 μA for the 2.2μm × 2.2μm JJ. We carefully positioned the three pickup coils so as to keep them at the same height at the centers of all three X, Y and Z coils. This can be done by arranging them along single line parallel to a sample surface. With the aid of multilayer technology of Nb-based fabrication, we attempted to reduce an inner diameter of the pickup coils to enhance both sensitivity and spatial resolution. The method for improving a spatial resolution of a local magnetic field image is to employ an XYZ piezo-driven scanner for controlling the positions of the pick-up coils. The fundamental characteristics of our SQUID sensors confirmed the proper operation of our SQUID sensors and found a good agreement with our design parameters.

Experimental functional analysis of severe skin-picking behavior in Prader-Willi syndrome.

PubMed

Hall, Scott S; Hustyi, Kristin M; Chui, Clara; Hammond, Jennifer L

2014-10-01

Skin picking is an extremely distressing and treatment resistant behavior commonly shown by individuals with Prader-Willi syndrome (PWS). However, with the exception of a limited number of published single-case and survey studies, little is known about the environmental determinants of skin picking in this population. In this study, functional analyses were conducted with thirteen individuals with PWS, aged 6-23 years, who engaged in severe skin-picking behavior. In addition to the conditions typically employed in a functional analysis (i.e., alone, attention, play, demand), we included an ignore condition to examine potential effects of stimulus control by the presence of an adult. Twelve participants engaged in skin picking during the functional analysis, with the highest levels occurring in the alone and ignore conditions for eight participants, suggesting that skin picking in these participants was maintained by automatic reinforcement. For the remaining four participants, an undifferentiated pattern of low-rate skin picking was observed across conditions. These data confirm previous studies indicating that skin picking in PWS may be maintained most often by automatically produced sensory consequences. There were no associations between demographic characteristics of the participants (e.g., sex, age, IQ or BMI) and levels of skin picking observed in the functional analysis. Additional investigations are needed to identify the nature of the sensory consequences produced during episodes of skin picking in PWS. Behavioral interventions designed to extinguish or compete with the potential sensory consequences arising from skin picking in PWS are also warranted. Copyright © 2014 Elsevier Ltd. All rights reserved.

A Kinect based sign language recognition system using spatio-temporal features

NASA Astrophysics Data System (ADS)

Memiş, Abbas; Albayrak, Songül

2013-12-01

This paper presents a sign language recognition system that uses spatio-temporal features on RGB video images and depth maps for dynamic gestures of Turkish Sign Language. Proposed system uses motion differences and accumulation approach for temporal gesture analysis. Motion accumulation method, which is an effective method for temporal domain analysis of gestures, produces an accumulated motion image by combining differences of successive video frames. Then, 2D Discrete Cosine Transform (DCT) is applied to accumulated motion images and temporal domain features transformed into spatial domain. These processes are performed on both RGB images and depth maps separately. DCT coefficients that represent sign gestures are picked up via zigzag scanning and feature vectors are generated. In order to recognize sign gestures, K-Nearest Neighbor classifier with Manhattan distance is performed. Performance of the proposed sign language recognition system is evaluated on a sign database that contains 1002 isolated dynamic signs belongs to 111 words of Turkish Sign Language (TSL) in three different categories. Proposed sign language recognition system has promising success rates.

Design of real-time communication system for image recognition based colony picking instrument

NASA Astrophysics Data System (ADS)

Wang, Qun; Zhang, Rongfu; Yan, Hua; Wu, Huamin

2017-11-01

In order to aachieve autommated observatiion and pickinng of monocloonal colonies, an overall dessign and realizzation of real-time commmunication system based on High-throoughput monooclonal auto-piicking instrumment is propossed. The real-time commmunication system is commposed of PCC-PLC commuunication systtem and Centrral Control CComputer (CCC)-PLC communicatioon system. Bassed on RS232 synchronous serial communnication methood to develop a set of dedicated shoort-range commmunication prootocol betweenn the PC and PPLC. Furthermmore, the systemm uses SQL SSERVER database to rrealize the dataa interaction between PC andd CCC. Moreoover, the commmunication of CCC and PC, adopted Socket Ethernnet communicaation based on TCP/IP protoccol. TCP full-dduplex data cannnel to ensure real-time data eexchange as well as immprove system reliability andd security. We tested the commmunication syystem using sppecially develooped test software, thee test results show that the sysstem can realizze the communnication in an eefficient, safe aand stable way between PLC, PC andd CCC, keep thhe real-time conntrol to PLC annd colony inforrmation collecttion.

Service dogs in the province of Quebec: sociodemographic profile of users and the dogs' impact on functional ability.

PubMed

Vincent, Claude; Gagnon, Dany; Routhier, François; Leblond, Jean; Boucher, Pascale; Blanchet, Marie; Martin-Lemoyne, Valérie

2015-03-01

The objectives of this study were to (1) describe the sociodemographic profile of service dog users, their physical disabilities, main occupations, living environment, and use of technical aids in daily life and (2) evaluate the impact of service dogs on wheelchair travel and picking up objects. Sociodemographic and clinical data were collected and various mobility tests were conducted in the service dog users' home environment (n = 199). The service dog users had injuries to the central or peripheral nervous system (55%), spinal cord (33%), or musculoskeletal or orthopedic system (12%). In the wheelchair travel on flat terrain test (n = 67), users travelled a longer distance in a shorter time, improving their average speed to 1.28 m/s with the service dog compared to 0.75 m/s without (p < 0.001). In a wheelchair propelling up a slope, 42% improved with the service dog (n = 60). Mounting a threshold/curb in a wheelchair, 41% improved with the service dog (n = 39). In a test where walkers and wheelchair users picked up three objects off the ground, 44% improved with the service dog (n = 164). Service dogs significantly improved wheelchair travel speed and distance on flat and ascending terrain, mounting a threshold/curb and picking up objects off the ground. Implications for Rehabilitation For people with motor impairments: Service dogs are most often used as a technical aid to pick up objects (96%), open doors (36%) and pull the wheelchair during travel (34%). Clients' performance in significant travel in a wheelchair (on flat terrain, on an upslope, mounting a threshold) improved with the service dog compared to their own performance without the dog. Clients' grasping performance (picking up three significant objects off the ground) improved with the service dog compared to their own performance without the dog.

An intelligent identification algorithm for the monoclonal picking instrument

NASA Astrophysics Data System (ADS)

Yan, Hua; Zhang, Rongfu; Yuan, Xujun; Wang, Qun

2017-11-01

The traditional colony selection is mainly operated by manual mode, which takes on low efficiency and strong subjectivity. Therefore, it is important to develop an automatic monoclonal-picking instrument. The critical stage of the automatic monoclonal-picking and intelligent optimal selection is intelligent identification algorithm. An auto-screening algorithm based on Support Vector Machine (SVM) is proposed in this paper, which uses the supervised learning method, which combined with the colony morphological characteristics to classify the colony accurately. Furthermore, through the basic morphological features of the colony, system can figure out a series of morphological parameters step by step. Through the establishment of maximal margin classifier, and based on the analysis of the growth trend of the colony, the selection of the monoclonal colony was carried out. The experimental results showed that the auto-screening algorithm could screen out the regular colony from the other, which meets the requirement of various parameters.

What predicts successful literacy acquisition in a second language?

PubMed Central

Frost, Ram; Siegelman, Noam; Narkiss, Alona; Afek, Liron

2013-01-01

We examined whether success (or failure) in assimilating the structure of a second language could be predicted by general statistical learning abilities that are non-linguistic in nature. We employed a visual statistical learning (VSL) task, monitoring our participants’ implicit learning of the transitional probabilities of visual shapes. A pretest revealed that performance in the VSL task is not correlated with abilities related to a general G factor or working memory. We found that native speakers of English who picked up the implicit statistical structure embedded in the continuous stream of shapes, on average, better assimilated the Semitic structure of Hebrew words. Our findings thus suggest that languages and their writing systems are characterized by idiosyncratic correlations of form and meaning, and these are picked up in the process of literacy acquisition, as they are picked up in any other type of learning, for the purpose of making sense of the environment. PMID:23698615

[The monodigital recognition test (MRT)--a sensitivity-specific variant of Moberg's pick-up test].

PubMed

Clemens, R

1979-01-01

The Test for Mono-digital Recognition (MRT) is a procedure specifically designed for the measurement of gnostic performance. The new test was derived from MOBERG's Pick-up Test with the aim of eliminating its shortcomings. Additional injuries do not restrict the applicability of the MRT and the test is not confined to the skin area supplied by the median nerve. The MRT expresses the degree of gnostic disturbances by means of a point system. For testing a patient only two to four minutes are needed.

75 FR 1408 - Pick-Sloan Missouri Basin Program, Eastern and Western Division Proposed Project Use Power Rate

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-11

... of Proposed Pick-Sloan Missouri Basin Program, Eastern and Western Divisions, Project Use Power Rate...) for Project Use Power for the Pick-Sloan Missouri Basin Program (P-SMBP), Eastern and Western... DEPARTMENT OF THE INTERIOR Bureau of Reclamation Pick-Sloan Missouri Basin Program, Eastern and...

75 FR 22423 - Pick-Sloan Missouri Basin Program, Eastern and Western Division Proposed Project Use Power Rate

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-28

...: Reopening of comment period for review of the Pick-Sloan Missouri Basin Program, Eastern and Western... reopening the comment period for the Pick-Sloan Missouri Basin Program, Eastern and Western Division... DEPARTMENT OF THE INTERIOR Bureau of Reclamation Pick-Sloan Missouri Basin Program, Eastern and...

How 'ground-picked' olive fruits affect virgin olive oil ethanol content, ethyl esters and quality.

PubMed

Beltran, Gabriel; Sánchez, Raquel; Sánchez-Ortiz, Araceli; Aguilera, Maria P; Bejaoui, Mohamed A; Jimenez, Antonio

2016-08-01

Olives dropped on the ground naturally sometimes are not separated from those fresh and healthy collected from the tree for harvest and processing. In this work we compared the quality, ethanol content and bioactive components of virgin olive oils from ground-picked olives, tree-picked fruits and their mixture. Ground-picked olives produced 'Lampante' virgin olive oils; these are of a lower quality category, because of important alterations in chemical and sensory characteristics. Ethyl esters showed the highest values, although under the regulated limit. The mixture of ground and tree-picked olives gave oils classified as 'virgin' because of sensory defects, although the quality parameters did not exceed the limits for the 'extra' category. Ethanol content showed a significant increase in the oils from ground- picked olives and their mixture with respect to those from tree-picked fruits. Furthermore, bioactive compounds showed a significant decrease as fruit quality was poorer. Ground-picked olives must be harvested and processed separately since they produce low-quality virgin olive oils with sensory defects and lower concentrations of bioactive compounds. The higher acidity and ethanol concentration observed in oils from ground-picked fruits or their mixture may help ethyl ester synthesis during storage. © 2015 Society of Chemical Industry. © 2015 Society of Chemical Industry.

Efficacy of the “pick and roll” offense in top level European basketball teams

PubMed Central

Marmarinos, Christos; Kostopoulos, Nikolaos; Apostolidis, Alexandros

2016-01-01

Abstract Team offense in basketball games consists of a set of offensive actions carried out with the cooperation of two or more players. Of these actions, the most commonly used in the last decade is the on-ball screen called the “pick and roll.” The aim of this study was to analyze all of the pick and rolls conducted in the Euroleague championship from all of the 24 participating teams and to investigate the possible relationships between success in the pick and roll and overall success of the teams. For this purpose, 12,376 pick and rolls from 502 matches were analyzed and classified in categories according to the end result of the offensive possession. The results showed that the most effective type of pick and roll offense was when a shot was attempted after 2 passes from the pick and roll occurrence, followed by the screener’s shot when he rolled to the basket. Additionally, linear regression analysis confirmed that pick and roll effectiveness could predict the final classification of the teams. Conclusively, coaches of the high level European clubs should focus on training the players to the most efficient phases of the pick and roll offense, so that the chances of winning the championship to be maximized. PMID:28149375

'Wanting' and 'liking' skin picking: A validation of the Skin Picking Reward Scale.

PubMed

Snorrason, Ivar; Olafsson, Ragnar P; Houghton, David C; Woods, Douglas W; Lee, Han-Joo

2015-12-01

Excoriation (skin-picking) disorder (SPD) is often conceptualized as a behavioral addiction in which aberrant reward processing may play an important role. The current study sought to develop a self-report instrument--the Skin Picking Reward Scale (SPRS)--that measures how strongly skin picking is 'liked' (i.e., the degree of pleasurable feelings while receiving the reward) and 'wanted' (i.e., the degree of the motivation to seek the reward). We administered the SPRS to individuals who endorsed excessive skin picking in online surveys and examined the scale's factor structure (Studies 1 and 2). We then asked individuals with documented pathological skin picking to complete the SPRS and other relevant questionnaires on two occasions one week apart (Study 3). Exploratory (Study 1; n = 330) and confirmatory (Study 2; n = 144) factor analyses consistently supported a two-factor structure reflecting the 'liking' and 'wanting' constructs. Results from Study 3 (N = 36) indicated that the Wanting and the Liking scales had adequate internal consistency and test-retest reliability. Additionally, consistent with predictions, the Wanting scale, but not the Liking scale, was associated with picking urges the following week, greater cue-reactivity, and more picking-related routines/habits. These initial findings suggest that SPRS is a psychometrically sound measure of 'wanting' and 'liking' in pathological skin picking. The SPRS may facilitate research on reward processing anomalies in SPD and serve as a useful clinical instrument (e.g., to identify those at risk for cue-induced relapse).

Harvest time of Cryptomeria japonica seeds depending on climate factors

NASA Astrophysics Data System (ADS)

Son, Seog-Gu; Kim, Hyo-Jeong; Kim, Chang-Soo; Byun, Kwang-Ok

2010-05-01

Sound seeds should have good germination rates and seed germination can be influenced by several factors. Seed picking time is regarded as one of the necessary elements to obtain sound seeds. From a clonal seed orchard of Cryptomeria japonica located in southern part of Korean peninsular, cones were picked about every 10 days from 30th of July 2005 to 30th of October in both 2005 and 2006. We have also analyzed the effects of climatic factors about two consecutive years on seed productivity. From the picked cones, seeds were collected and these germination ability, seed size and embryo shapes were investigated according to cone picking time. The 1,000-seed weight picked on 18th of August was 3.3 g and 5.3 g on 30th of September 2005and 2006. The size of seeds picked from 18th of August to 30th of September increased from 19.3 mm to 21.3 mm in length and from 15.8 mm to 18.5 mm in width. Depending on picking time, various shapes of embryos, including embryos with liquid material, jellied material and fully matured ones were observed. Germination aspects also varied throughout the test days. About two weeks after seeding in a glass petri-dish, germinal apparatuses appeared from each test seed sets which had been picked from after 10 August 2005 and 10 August 2006. The germination rates started from 10.7% from seeds picked 20 August 2006. Average germination rate in 2005 was 18.3 and 19.6 in 2006. In 2005, the highest germination rate was 34.3% from seeds picked on the 30th of September. In 2006, the highest germination rate was 31.7% for seeds picked at the same date as the 2005 seeds. After September, the highest germination rate for picked seeds decreased in both 2005 and 2006. Among the climatic factors, monthly sum of temperature and of precipitation were the main factors for maturation of C. japonica seeds. The results implied that the best cone picking time for the Korean C. japonica seed orchard to be around the end of September.

Subsampled open-reference clustering creates consistent, comprehensive OTU definitions and scales to billions of sequences.

PubMed

Rideout, Jai Ram; He, Yan; Navas-Molina, Jose A; Walters, William A; Ursell, Luke K; Gibbons, Sean M; Chase, John; McDonald, Daniel; Gonzalez, Antonio; Robbins-Pianka, Adam; Clemente, Jose C; Gilbert, Jack A; Huse, Susan M; Zhou, Hong-Wei; Knight, Rob; Caporaso, J Gregory

2014-01-01

We present a performance-optimized algorithm, subsampled open-reference OTU picking, for assigning marker gene (e.g., 16S rRNA) sequences generated on next-generation sequencing platforms to operational taxonomic units (OTUs) for microbial community analysis. This algorithm provides benefits over de novo OTU picking (clustering can be performed largely in parallel, reducing runtime) and closed-reference OTU picking (all reads are clustered, not only those that match a reference database sequence with high similarity). Because more of our algorithm can be run in parallel relative to "classic" open-reference OTU picking, it makes open-reference OTU picking tractable on massive amplicon sequence data sets (though on smaller data sets, "classic" open-reference OTU clustering is often faster). We illustrate that here by applying it to the first 15,000 samples sequenced for the Earth Microbiome Project (1.3 billion V4 16S rRNA amplicons). To the best of our knowledge, this is the largest OTU picking run ever performed, and we estimate that our new algorithm runs in less than 1/5 the time than would be required of "classic" open reference OTU picking. We show that subsampled open-reference OTU picking yields results that are highly correlated with those generated by "classic" open-reference OTU picking through comparisons on three well-studied datasets. An implementation of this algorithm is provided in the popular QIIME software package, which uses uclust for read clustering. All analyses were performed using QIIME's uclust wrappers, though we provide details (aided by the open-source code in our GitHub repository) that will allow implementation of subsampled open-reference OTU picking independently of QIIME (e.g., in a compiled programming language, where runtimes should be further reduced). Our analyses should generalize to other implementations of these OTU picking algorithms. Finally, we present a comparison of parameter settings in QIIME's OTU picking workflows and make recommendations on settings for these free parameters to optimize runtime without reducing the quality of the results. These optimized parameters can vastly decrease the runtime of uclust-based OTU picking in QIIME.

A Probability Based Approach for the Allocation of Player Draft Selections in Australian Rules Football

PubMed Central

Anthony, Bedford; Schembri, Adrian J.

2006-01-01

Australian Rules Football, governed by the Australian Football League (AFL) is the most popular winter sport played in Australia. Like North American team based leagues such as the NFL, NBA and NHL, the AFL uses a draft system for rookie players to join a team’s list. The existing method of allocating draft selections in the AFL is simply based on the reverse order of each team’s finishing position for that season, with teams winning less than or equal to 5 regular season matches obtaining an additional early round priority draft pick. Much criticism has been levelled at the existing system since it rewards losing teams and does not encourage poorly performing teams to win matches once their season is effectively over. We propose a probability-based system that allocates a score based on teams that win ‘unimportant’ matches (akin to Carl Morris’ definition of importance). We base the calculation of ‘unimportance’ on the likelihood of a team making the final eight following each round of the season. We then investigate a variety of approaches based on the ‘unimportance’ measure to derive a score for ‘unimportant’ and unlikely wins. We explore derivatives of this system, compare past draft picks with those obtained under our system, and discuss the attractiveness of teams knowing the draft reward for winning each match in a season. Key Points Draft choices are allocated using a probabilistic approach that rewards teams for winning unimportant matches. The method is based upon Carl Morris’ Importance and probabilistic calculations of making the finals. The importance of a match is calculated probabilistically to arrive at a DScore. Higher DScores are weighted towards teams winning unimportant matches which in turn lead to higher draft selections. Provides an alternative to current draft systems that are based on ‘losing to win’. PMID:24357945

Duplicate Class IV (Lumber) Ordering Within Defense Logistics Agency and Its Impact in Each Combatant Command

DTIC Science & Technology

2015-12-01

this vignette, the assumption is that all processes occur as they are designed with no variability, and that all lumber supply stocks have been...is available, then SGT Doe, or a designated command representative, can pick up the lumber at the SSA using a manual paper form, conducting a process...requested by SGT Doe’s order, then a new government contract is solicited after the designated contract administration service (CAS) approves the request

21 CFR 872.6650 - Massaging pick or tip for oral hygiene.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Massaging pick or tip for oral hygiene. 872.6650... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Miscellaneous Devices § 872.6650 Massaging pick or tip for oral hygiene. (a) Identification. A massaging pick or tip for oral hygiene is a rigid, pointed device intended...

From belt picking to bin packing

NASA Astrophysics Data System (ADS)

Balslev, Ivar; Eriksen, René D.

2002-10-01

We face the problem of computer-vision aided robot grasping of objects with more or less random positions. This field is of vital importance in the further progress in flexible automation of industrial processes, since conventional methods using fixtures and/or vibration bowls are expensive and inflexible. We study various types of disorder: A) visually isolated objects lying in distinct resting modes on a flat homogenous conveyer belt, B) partially occluded objects lying in distinct resting modes on a flat homogenous conveyer belt, C) visually separated objects, unrestricted object-camera pose, and fully surrounded by background, D) partially occluded objects, unrestricted relative orientation, but with a sizeable fraction of their contour detectable using foreground-background separation, E) partially occluded objects with unrestricted pose and no help from foreground-background separation. The cases A), B), and - to some extend - D) are encountered in belt picking, while case E) is true bin picking. Since physical storage of products and components in industry is based on deep containers with many layers of somewhat disordered objects, the belt-picking concept is only the first step for achieving flexible, unsupervised parts feeding. We have developed and tested a generic, fast, and easily trainable system for the cases A) and B). The system is unique because it handles the perspective effects exactly so there is no restriction concerning object dimensions relative to the distance to the camera. We report on a strategy to be used in treating case C) using the principles developed for the cases A-B). We discuss possible strategies to be employed when going all the way to cases of D) and E).

Low Density ITB Studies Using the Upgraded C-Mod Reflectometry System

NASA Astrophysics Data System (ADS)

Dominguez, A.; Edlund, E.; Fiore, C. L.; Lin, L.; Marmar, E. S.; Snipes, J. A.; Porkolab, M.; Kramer, G. J.; Rowan, W. L.

2007-11-01

The Alcator C-Mod reflectometry system was recently upgraded in two ways: The low frequency channels were changed from amplitude modulation - in which two microwave signals, slightly separated in frequency, are injected into the plasma - to baseband, where a single frequency is used, in order to improve density fluctuation measurements. The second change, a variable frequency channel operating over the range from 122GHz to 140GHz (with corresponding density cutoffs of 1.84-2.43x10^20m-3) has been installed in collaboration with PPPL. Initial results from the upgraded system are presented, including the study of low density Internal Transport Barriers. Using O-mode waves, the reflectometry system is able to radially localize density fluctuations on the low field side along the tokamak midplane. It can, therefore, be used to probe the foot of low density ITBs. The corresponding reflectometry data will be compared to those of other fluctuation diagnostics, including Phase Contrast Imaging and magnetic pick-up coils.

Niemann-Pick disease

MedlinePlus

NPD; Sphingomyelinase deficiency; Lipid storage disorder - Niemann-Pick disease; Lysosomal storage disease - Niemann-Pick ... cannot properly break down cholesterol and other fats (lipids). This leads to too much cholesterol in the ...

Robotic Vision, Tray-Picking System Design Using Multiple, Optical Matched Filters

NASA Astrophysics Data System (ADS)

Leib, Kenneth G.; Mendelsohn, Jay C.; Grieve, Philip G.

1986-10-01

The optical correlator is applied to a robotic vision, tray-picking problem. Complex matched filters (MFs) are designed to provide sufficient optical memory for accepting any orientation of the desired part, and a multiple holographic lens (MHL) is used to increase the memory for continuous coverage. It is shown that with appropriate thresholding a small part can be selected using optical matched filters. A number of criteria are presented for optimizing the vision system. Two of the part-filled trays that Mendelsohn used are considered in this paper which is the analog (optical) expansion of his paper. Our view in this paper is that of the optical correlator as a cueing device for subsequent, finer vision techniques.

The relationship of psychological trauma with trichotillomania and skin picking.

PubMed

Özten, Eylem; Sayar, Gökben Hızlı; Eryılmaz, Gül; Kağan, Gaye; Işık, Sibel; Karamustafalıoğlu, Oğuz

2015-01-01

Interactions between psychological, biological and environmental factors are important in development of trichotillomania and skin picking. The aim of this study is to determine the relationship of traumatic life events, symptoms of post-traumatic stress disorder and dissociation in patients with diagnoses of trichotillomania and skin picking disorder. The study included patients who was diagnosed with trichotillomania (n=23) or skin picking disorder (n=44), and healthy controls (n=37). Beck Depression Inventory, Traumatic Stress Symptoms Scale and Dissociative Experiences Scale were administered. All groups checked a list of traumatic life events to determine the exposed traumatic events. There was no statistical significance between three groups in terms of Dissociative Experiences Scale scores (P=0.07). But Beck Depression Inventory and Traumatic Stress Symptoms Scale scores of trichotillomania and skin picking groups were significantly higher than the control group. Subjects with a diagnosis of trichotillomania and skin picking reported statistically significantly higher numbers of traumatic and negative events in childhood compared to healthy subjects. We can conclude that trauma may play a role in development of both trichotillomania and skin picking. Increased duration of trichotillomania or skin picking was correlated with decreased presence of post-traumatic stress symptoms. The reason for the negatively correlation of severity of post-traumatic stress symptoms and self-harming behavior may be speculated as developing trichotillomania or skin picking symptoms helps the patient to cope with intrusive thoughts related to trauma. Future longitudinal research must focus on whether trauma and post-traumatic stress or trichotillomania and skin picking precede the development of mental disorder.

Implementation of the control electronics for KMOS instrument

NASA Astrophysics Data System (ADS)

Hess, Hans-Joachim; Ilijevski, Ivica; Kravcar, Helmut; Richter, Josef; Rühfel, Josef; Schwab, Christoph

2010-07-01

The KMOS Instrument is built to be one of the second generation VLT instruments. It is a highly complex multi-object spectrograph for the near infrared. Nearly 60 cryogenic mechanisms have to be controlled. This includes 24 deployable Pick-Off arms, three filter and grating wheels as well as three focus stages and four lamps with an attenuator wheel. These mechanisms and a calibration unit are supervised by three control cabinets based on the VLT standards. To follow the rotation of the Nasmyth adaptor the cabinets are mounted into a Co-rotating structure. The presentation will highlight the requirements on the electronics control and how these are met by new technologies applying a compact and reliable signal distribution. To enable high density wiring within the given space envelope flex-rigid printed circuit board designs have been installed. In addition an electronic system that detects collisions between the moving Pick-Off arms will be presented for safe operations. The control system is designed to achieve two micron resolution as required by optomechanical and flexure constraints. Dedicated LVDT sensors are capable to identify the absolute positions of the Pick- Off arms. These contribute to a safe recovery procedure after power failure or accidental collision.

Electronically transmitted prescriptions not picked up at pharmacies in Sweden.

PubMed

Ax, Fredrik; Ekedahl, Anders

2010-03-01

Electronically transmitted prescriptions (ETPs) became common after 1995 in Sweden; however, it is accompanied by a substantial increase in the number of prescriptions not picked up at pharmacies. To investigate the "no pick-up" rates of ETPs at pharmacies across type of drug and patient age and gender and the reasons patients' report for no pick-up. A cross-sectional study examining no pick-up of ETPs transmitted during 3 months in 2002, and a mail survey of patients to determine the reasons for failure to pick-up in the county of Sörmland, Sweden, with a population of 261,000, and 21 pharmacies. Chi-square tests were used for calculations of frequency differences among groups. The overall no pick-up rate of ETPs was 2.5%; men had consistently higher rates than women. The highest rates were seen for adolescents and young adults. Rates were higher than average for antibiotics. About 60% of the answers indicated that prescriptions not picked up were duplicate prescriptions or not needed. "Unintentional nonadherence" was reported by one-fifth of patients. No pick-up rate in general was low (2.5%), but there were differences across patient age and gender, the rates being higher among adolescents and young adults. Duplicate prescriptions may explain a significant share of the abandoned prescriptions. Copyright 2010 Elsevier Inc. All rights reserved.

Design and implementation of a magnetically suspended microrobotic pick-and-place system

NASA Astrophysics Data System (ADS)

Shameli, Ehsan; Craig, David G.; Khamesee, Mir Behrad

2006-04-01

Micromanipulation is an emerging technology in such diverse areas as precision engineering, microfabrication, and microsurgery. Each of these areas impose certain technological constraints and requirements in fabrication, actuation, and control. This paper performs a review on the latest technologies of microrobotic actuation techniques and suggests a suitable technique for the actuation of a magnetically levitated microrobot. The microrobot, suspended in an externally produced magnetic field, consists of a gripper attached to a series of permanent magnets and is capable of simple pick and place tasks. A number of electromagnets produce the external magnetic field and three laser sensors feedback the position of the levitated microrobot. Through finite element analysis, performance of the levitation system was investigated, and simulations and experiments were carried out to demonstrate the practical capabilities of the proposed system.

Matching pursuit parallel decomposition of seismic data

NASA Astrophysics Data System (ADS)

Li, Chuanhui; Zhang, Fanchang

2017-07-01

In order to improve the computation speed of matching pursuit decomposition of seismic data, a matching pursuit parallel algorithm is designed in this paper. We pick a fixed number of envelope peaks from the current signal in every iteration according to the number of compute nodes and assign them to the compute nodes on average to search the optimal Morlet wavelets in parallel. With the help of parallel computer systems and Message Passing Interface, the parallel algorithm gives full play to the advantages of parallel computing to significantly improve the computation speed of the matching pursuit decomposition and also has good expandability. Besides, searching only one optimal Morlet wavelet by every compute node in every iteration is the most efficient implementation.

High-Density Near-Field Optical Disc Recording

NASA Astrophysics Data System (ADS)

Shinoda, Masataka; Saito, Kimihiro; Ishimoto, Tsutomu; Kondo, Takao; Nakaoki, Ariyoshi; Ide, Naoki; Furuki, Motohiro; Takeda, Minoru; Akiyama, Yuji; Shimouma, Takashi; Yamamoto, Masanobu

2005-05-01

We developed a high-density near-field optical recording disc system using a solid immersion lens. The near-field optical pick-up consists of a solid immersion lens with a numerical aperture of 1.84. The laser wavelength for recording is 405 nm. In order to realize the near-field optical recording disc, we used a phase-change recording media and a molded polycarbonate substrate. A clear eye pattern of 112 GB capacity with 160 nm track pitch and 50 nm bit length was observed. The equivalent areal density is 80.6 Gbit/in2. The bottom bit error rate of 3 tracks-write was 4.5× 10-5. The readout power margin and the recording power margin were ± 30.4% and ± 11.2%, respectively.

A Preliminary Analysis of the Phenomenology of Skin-Picking in Prader-Willi Syndrome

ERIC Educational Resources Information Center

Morgan, Jessica R.; Storch, Eric A.; Woods, Douglas W.; Bodzin, Danielle; Lewin, Adam B.; Murphy, Tanya K.

2010-01-01

To examine the nature and psychosocial correlates of skin-picking behavior in youth with Prader-Willi Syndrome (PWS). Parents of 67 youth (aged 5-19 years) with PWS were recruited to complete an internet-based survey that included measures of: skin-picking behaviors, the automatic and/or focused nature of skin-picking, severity of skin-picking…

Identification of barriers to medication adherence in a Latino population.

PubMed

Compton, Sheryl; Haack, Sally; Phillips, Charles R

2010-12-01

Barriers to medication adherence may present differently in diverse patient populations. Because of changing U.S. demographics, health care providers will be required to identify alternative strategies for managing increasingly diverse patient populations. This pilot project identified barriers that may hinder medication adherence in a Latino population. The results of the survey may identify trends in barriers allowing for the development of interventions aimed at improving medication adherence. The study used a convenience sample of Spanish-labeled prescriptions that had not been picked up from a community pharmacy after a 2-week period to identify study subjects. Patients were contacted by phone and surveyed regarding reasons for not picking up their prescription medication. The 24-item survey instrument consisted of demographic and medication-related questions, reasons for, and associated barriers with failure to pick up medications. The most common classes of medications patients failed to pick up were chronic medications. More than 90% of the patients thought that the medication in question was helpful to them, and nearly 80% thought that the medicine was still needed. Patients cited communication issues (ie, content matter, such as when the prescription was ready), logistics, and limited hours of pharmacy operation as the primary barriers in picking up their medications, whereas nearly 40% failed to identify any barriers. Barriers identified by patients that could be improved included confusion regarding when their prescription was ready and limited hours of pharmacy operation. Most of the patients were comfortable using the American health care system. The barriers to medication adherence identified did not appear to be the result of cultural influences. This could be because the community pharmacy had bilingual staff and interpreters available for patient education and prescription processing. Alternative methods are needed to further identify reasons for failure to pick up medications before medication adherence programs can be designed. Copyright © 2010 Elsevier Inc. All rights reserved.

A non-parametric method for automatic determination of P-wave and S-wave arrival times: application to local micro earthquakes

NASA Astrophysics Data System (ADS)

Rawles, Christopher; Thurber, Clifford

2015-08-01

We present a simple, fast, and robust method for automatic detection of P- and S-wave arrivals using a nearest neighbours-based approach. The nearest neighbour algorithm is one of the most popular time-series classification methods in the data mining community and has been applied to time-series problems in many different domains. Specifically, our method is based on the non-parametric time-series classification method developed by Nikolov. Instead of building a model by estimating parameters from the data, the method uses the data itself to define the model. Potential phase arrivals are identified based on their similarity to a set of reference data consisting of positive and negative sets, where the positive set contains examples of analyst identified P- or S-wave onsets and the negative set contains examples that do not contain P waves or S waves. Similarity is defined as the square of the Euclidean distance between vectors representing the scaled absolute values of the amplitudes of the observed signal and a given reference example in time windows of the same length. For both P waves and S waves, a single pass is done through the bandpassed data, producing a score function defined as the ratio of the sum of similarity to positive examples over the sum of similarity to negative examples for each window. A phase arrival is chosen as the centre position of the window that maximizes the score function. The method is tested on two local earthquake data sets, consisting of 98 known events from the Parkfield region in central California and 32 known events from the Alpine Fault region on the South Island of New Zealand. For P-wave picks, using a reference set containing two picks from the Parkfield data set, 98 per cent of Parkfield and 94 per cent of Alpine Fault picks are determined within 0.1 s of the analyst pick. For S-wave picks, 94 per cent and 91 per cent of picks are determined within 0.2 s of the analyst picks for the Parkfield and Alpine Fault data set, respectively. For the Parkfield data set, our method picks 3520 P-wave picks and 3577 S-wave picks out of 4232 station-event pairs. For the Alpine Fault data set, the method picks 282 P-wave picks and 311 S-wave picks out of a total of 344 station-event pairs. For our testing, we note that the vast majority of station-event pairs have analyst picks, although some analyst picks are excluded based on an accuracy assessment. Finally, our tests suggest that the method is portable, allowing the use of a reference set from one region on data from a different region using relatively few reference picks.

Designing and Implementing a Retrospective Earthquake Detection Framework at the U.S. Geological Survey National Earthquake Information Center

NASA Astrophysics Data System (ADS)

Patton, J.; Yeck, W.; Benz, H.

2017-12-01

The U.S. Geological Survey National Earthquake Information Center (USGS NEIC) is implementing and integrating new signal detection methods such as subspace correlation, continuous beamforming, multi-band picking and automatic phase identification into near-real-time monitoring operations. Leveraging the additional information from these techniques help the NEIC utilize a large and varied network on local to global scales. The NEIC is developing an ordered, rapid, robust, and decentralized framework for distributing seismic detection data as well as a set of formalized formatting standards. These frameworks and standards enable the NEIC to implement a seismic event detection framework that supports basic tasks, including automatic arrival time picking, social media based event detections, and automatic association of different seismic detection data into seismic earthquake events. In addition, this framework enables retrospective detection processing such as automated S-wave arrival time picking given a detected event, discrimination and classification of detected events by type, back-azimuth and slowness calculations, and ensuring aftershock and induced sequence detection completeness. These processes and infrastructure improve the NEIC's capabilities, accuracy, and speed of response. In addition, this same infrastructure provides an improved and convenient structure to support access to automatic detection data for both research and algorithmic development.

A study of the relative responsiveness of five sensibility tests for assessment of recovery after median nerve injury and repair.

PubMed

Jerosch-Herold, Christina

2003-06-01

A longitudinal dynamic cohort study was conducted on patients with median nerve injuries to evaluate the relative responsiveness of five sensibility tests: touch threshold using the WEST (monofilaments), static two-point discrimination, locognosia, a pick-up test and an object recognition test. Repeated assessments were performed starting at 6 months after surgery. In order to compare the relative responsiveness of each test, effect size and the standard response mean were calculated for sensibility changes occurring between 6 and 18 months after repair. Large effect sizes (>0.8) and standard response means (>0.8) were obtained for the WEST, locognosia, pick-up and object recognition tests. Two-point discrimination was hardly measurable at any time point and exhibited strong flooring effects. Further analysis of all time points was undertaken to assess the strength of the monotonic relationship between test scores and time elapsed since surgery. Comparison of monotonicity between the five tests indicated that the WEST performed best, whereas two-point discrimination performed worst. These results suggest that the monofilament test (WEST), locognosia test, Moberg pick-up test and tactile gnosis test capture sensibility changes over time well and should be considered for inclusion in the outcome assessment of patients with median nerve injury.

Defective Autophagy, Mitochondrial Clearance and Lipophagy in Niemann-Pick Type B Lymphocytes

PubMed Central

Salucci, Sara; Luchetti, Francesca; Falcieri, Elisabetta; Di Sario, Gianna; Palma, Fulvio; Papa, Stefano

2016-01-01

Niemann-Pick disease type A (NP-A) and type B (NP-B) are lysosomal storage diseases (LSDs) caused by sphingomyelin accumulation in lysosomes relying on reduced or absent acid sphingomyelinase. A considerable body of evidence suggests that lysosomal storage in many LSD impairs autophagy, resulting in the accumulation of poly-ubiquitinated proteins and dysfunctional mitochondria, ultimately leading to cell death. Here we test this hypothesis in a cellular model of Niemann-Pick disease type B, in which autophagy has never been studied. The basal autophagic pathway was first examined in order to evaluate its functionality using several autophagy-modulating substances such as rapamycin and nocodazole. We found that human NP-B B lymphocytes display considerable alteration in their autophagic vacuole accumulation and mitochondrial fragmentation, as well as mitophagy induction (for damaged mitochondria clearance). Furthermore, lipid traceability of intra and extra-cellular environments shows lipid accumulation in NP-B B lymphocytes and also reveals their peculiar trafficking/management, culminating in lipid microparticle extrusion (by lysosomal exocytosis mechanisms) or lipophagy. All of these features point to the presence of a deep autophagy/mitophagy alteration revealing autophagic stress and defective mitochondrial clearance. Hence, rapamycin might be used to regulate autophagy/mitophagy (at least in part) and to contribute to the clearance of lysosomal aberrant lipid storage. PMID:27798705

Interaction between the glutamate transporter GLT1b and the synaptic PDZ domain protein PICK1

PubMed Central

Bassan, Merav; Liu, Hongguang; Madsen, Kenneth L.; Armsen, Wencke; Zhou, Jiayi; DeSilva, Tara; Chen, Weizhi; Paradise, Allison; Brasch, Michael A.; Staudinger, Jeff; Gether, Ulrik; Irwin, Nina; Rosenberg, Paul A.

2015-01-01

Synaptic plasticity is implemented by the interaction of glutamate receptors with PDZ domain proteins. Glutamate transporters provide the only known mechanism of clearance of glutamate from excitatory synapses, and GLT1 is the major glutamate transporter. We show here that GLT1 interacts with the PDZ domain protein PICK1, which plays a critical role in regulating the expression of glutamate receptors at excitatory synapses. A yeast two-hybrid screen of a neuronal library using the carboxyl tail of GLT1b yielded clones expressing PICK1. The GLT1b C-terminal peptide bound to PICK1 with high affinity (Ki = 6.5 ± 0.4 μm) in an in vitro fluorescence polarization assay. We also tested peptides based on other variants of GLT1 and other glutamate transporters. GLT1b co-immunoprecipitated with PICK1 from rat brain lysates and COS7 cell lysates derived from cells transfected with plasmids expressing PICK1 and GLT1b. In addition, expression of GLT1b in COS7 cells changed the distribution of PICK1, bringing it to the surface. GLT1b and PICK1 co-localized with each other and with synaptic markers in hippocampal neurons in culture. Phorbol ester, an activator of protein kinase C (PKC), a known PICK1 interactor, had no effect on glutamate transport in rat forebrain neurons in culture. However, we found that exposure of neurons to a myristolated decoy peptide with sequence identical to the C-terminal sequence of GLT1b designed to block the PICK1–GLT1b interaction rendered glutamate transport into neurons responsive to phorbol ester. These results suggest that the PICK1–GLT1b interaction regulates the modulation of GLT1 function by PKC. PMID:18184314

Picking among pen-reared quail

USGS Publications Warehouse

Nestler, R.B.; Coburn, D.R.; Titus, H.W.

1945-01-01

During five years (1939-43) of nutritional research on pen-reared bobwhite quail at the Patuxent Research Refuge, Bowie, Maryland, observations on picking among birds of all ages showed the following results: 1. Picking occurred on all grains tested: corn, wheat, oats, oat groats, barley, millet, buckwheat, kaffir, and mixtures of cereals. The lowest incidence was with buckwheat as the sole grain in a growing diet....2. Picking occurred on all levels of fiber from one to 11per cent in a growing diet....3. Picking occurred on various grinds of corn, barley, and oats, but was least when these cereals were ground in a hammer mill with 3/32 inch mesh screen....4. The incidence was as high on diets containing animal protein as on those containing no animal protein. ....5. After picking began, the addition of one or two per cent of salt to the diet for several days was effective, in many instances, in checking the disorder. Results at the Refuge and the answers to questionnaires from 222 private propagators of gamebirds showed that in two-thirds. of the cases, treatment with an increased quantity of salt successfully stopped the trouble. As a preventative, however, salt was of little value. Picking occurred on both low and high levels of salt.....6. Supplementing the regular diet with certain feed concentrates such as fishmeal, soybean oil meal, liver meal, or chopped greens offered in a separate feeder for a day or two, was as efficacious as the addition of salt.....7. More picking occurred among quail chicks on a 22 per cent level of protein than on higher levels.....8. There was less picking on diets relished by the birds than on those seemingly unpalatable.....9. There was no correlation. between the amount of floor space per chick and the incidence of picking.....10. Increasing the feeding and drinking space seemed to have a marked beneficial effect.....11. Some adult birds on wire floors resorted to self-picking of their feet after the toes were frost-bitten.

The PICK1 Ca2+ sensor modulates N-methyl-d-aspartate (NMDA) receptor-dependent microRNA-mediated translational repression in neurons.

PubMed

Rajgor, Dipen; Fiuza, Maria; Parkinson, Gabrielle T; Hanley, Jonathan G

2017-06-09

MicroRNAs (miRNAs) are important regulators of localized mRNA translation in neuronal dendrites. The presence of RNA-induced silencing complex proteins in these compartments and the dynamic miRNA expression changes that occur in response to neuronal stimulation highlight their importance in synaptic plasticity. Previously, we demonstrated a novel interaction between the major RNA-induced silencing complex component Argounaute-2 (Ago2) and the BAR (bin/amphiphysin/rvs) domain protein PICK1. PICK1 recruits Ago2 to recycling endosomes in dendrites, where it inhibits miRNA-mediated translational repression. Chemical induction of long-term depression via NMDA receptor activation causes the dissociation of Ago2 from PICK1 and a consequent increase in dendritic miRNA-mediated gene silencing. The mechanism that underlies the regulation of PICK1-Ago2 binding is unknown. In this study, we demonstrate that the PICK1-Ago2 interaction is directly sensitive to Ca 2+ ions so that high [Ca 2+ ] free reduces PICK1 binding to Ago2. Mutating a stretch of C-terminal Ca 2+ -binding residues in PICK1 results in a complete block of NMDA-induced PICK1-Ago2 disassociation in cortical neurons. Furthermore, the same mutant also blocks NMDA-stimulated miRNA-mediated gene silencing. This study defines a novel mechanism whereby elevated [Ca 2+ ] induced by NMDA receptor activation modulates Ago2 and miRNA activity via PICK1. Our work suggests a Ca 2+ -dependent process to regulate miRNA activity in neurons in response to the induction of long-term depression. © 2017 by The American Society for Biochemistry and Molecular Biology, Inc.

Canonical Statistical Model for Maximum Expected Immission of Wire Conductor in an Aperture Enclosure

NASA Technical Reports Server (NTRS)

Bremner, Paul G.; Vazquez, Gabriel; Christiano, Daniel J.; Trout, Dawn H.

2016-01-01

Prediction of the maximum expected electromagnetic pick-up of conductors inside a realistic shielding enclosure is an important canonical problem for system-level EMC design of space craft, launch vehicles, aircraft and automobiles. This paper introduces a simple statistical power balance model for prediction of the maximum expected current in a wire conductor inside an aperture enclosure. It calculates both the statistical mean and variance of the immission from the physical design parameters of the problem. Familiar probability density functions can then be used to predict the maximum expected immission for deign purposes. The statistical power balance model requires minimal EMC design information and solves orders of magnitude faster than existing numerical models, making it ultimately viable for scaled-up, full system-level modeling. Both experimental test results and full wave simulation results are used to validate the foundational model.

Horizontal high speed stacking for batteries with prismatic cans

DOEpatents

Bartos, Andrew L.; Lin, Yhu-Tin; Turner, III, Raymond D.

2016-06-14

A system and method for stacking battery cells or related assembled components. Generally planar, rectangular (prismatic-shaped) battery cells are moved from an as-received generally vertical stacking orientation to a generally horizontal stacking orientation without the need for robotic pick-and-place equipment. The system includes numerous conveyor belts that work in cooperation with one another to deliver, rotate and stack the cells or their affiliated assemblies. The belts are outfitted with components to facilitate the cell transport and rotation. The coordinated movement between the belts and the components promote the orderly transport and rotation of the cells from a substantially vertical stacking orientation into a substantially horizontal stacking orientation. The approach of the present invention helps keep the stacked assemblies stable so that subsequent assembly steps--such as compressing the cells or attaching electrical leads or thermal management components--may proceed with a reduced chance of error.

A Semiautomated Multilayer Picking Algorithm for Ice-sheet Radar Echograms Applied to Ground-Based Near-Surface Data

NASA Technical Reports Server (NTRS)

Onana, Vincent De Paul; Koenig, Lora Suzanne; Ruth, Julia; Studinger, Michael; Harbeck, Jeremy P.

2014-01-01

Snow accumulation over an ice sheet is the sole mass input, making it a primary measurement for understanding the past, present, and future mass balance. Near-surface frequency-modulated continuous-wave (FMCW) radars image isochronous firn layers recording accumulation histories. The Semiautomated Multilayer Picking Algorithm (SAMPA) was designed and developed to trace annual accumulation layers in polar firn from both airborne and ground-based radars. The SAMPA algorithm is based on the Radon transform (RT) computed by blocks and angular orientations over a radar echogram. For each echogram's block, the RT maps firn segmented-layer features into peaks, which are picked using amplitude and width threshold parameters of peaks. A backward RT is then computed for each corresponding block, mapping the peaks back into picked segmented-layers. The segmented layers are then connected and smoothed to achieve a final layer pick across the echogram. Once input parameters are trained, SAMPA operates autonomously and can process hundreds of kilometers of radar data picking more than 40 layers. SAMPA final pick results and layer numbering still require a cursory manual adjustment to correct noncontinuous picks, which are likely not annual, and to correct for inconsistency in layer numbering. Despite the manual effort to train and check SAMPA results, it is an efficient tool for picking multiple accumulation layers in polar firn, reducing time over manual digitizing efforts. The trackability of good detected layers is greater than 90%.

Neural correlates of self-injurious behavior in Prader-Willi syndrome.

PubMed

Klabunde, Megan; Saggar, Manish; Hustyi, Kristin M; Hammond, Jennifer L; Reiss, Allan L; Hall, Scott S

2015-10-01

Individuals with Prader-Willi syndrome (PWS), a genetic disorder caused by mutations to the q11-13 region on chromosome 15, commonly show severe skin-picking behaviors that can cause open wounds and sores on the body. To our knowledge, however, no studies have examined the potential neural mechanisms underlying these behaviors. Seventeen individuals with PWS, aged 6-25 years, who showed severe skin-picking behaviors, were recruited and scanned on a 3T scanner. We used functional magnetic resonance imaging (fMRI) while episodes of skin picking were recorded on an MRI-safe video camera. Three participants displayed skin picking continuously throughout the scan, three participants did not display skin picking, and the data for one participant evidenced significant B0 inhomogeneity that could not be corrected. The data for the remaining 10 participants (six male, four female) who displayed a sufficient number of picking and nonpicking episodes were subjected to fMRI analysis. Results showed that regions involved in interoceptive, motor, attention, and somatosensory processing were activated during episodes of skin-picking behavior compared with nonpicking episodes. Scores obtained on the Self-Injury Trauma scale were significantly negatively correlated with mean activation within the right insula and left precentral gyrus. These data indicate that itch and pain processes appear to underlie skin-picking behaviors in PWS, suggesting that interoceptive disturbance may contribute to the severity and maintenance of abnormal skin-picking behaviors in PWS. Implications for treatments are discussed. © 2015 Wiley Periodicals, Inc.

Locating Portable Stations to Support the Operation of Bike Sharing Systems

DOT National Transportation Integrated Search

2017-12-26

Redistributing bikes has been a major challenge for the daily operation of bike sharing system around the world. Existing literature explore solution strategies that rely on pick-up-and-delivery routing as well as user incentivization approaches. The...

Enhancing seismic P phase arrival picking based on wavelet denoising and kurtosis picker

NASA Astrophysics Data System (ADS)

Shang, Xueyi; Li, Xibing; Weng, Lei

2018-01-01

P phase arrival picking of weak signals is still challenging in seismology. A wavelet denoising is proposed to enhance seismic P phase arrival picking, and the kurtosis picker is applied on the wavelet-denoised signal to identify P phase arrival. It has been called the WD-K picker. The WD-K picker, which is different from those traditional wavelet-based pickers on the basis of a single wavelet component or certain main wavelet components, takes full advantage of the reconstruction of main detail wavelet components and the approximate wavelet component. The proposed WD-K picker considers more wavelet components and presents a better P phase arrival feature. The WD-K picker has been evaluated on 500 micro-seismic signals recorded in the Chinese Yongshaba mine. The comparison between the WD-K pickings and manual pickings shows the good picking accuracy of the WD-K picker. Furthermore, the WD-K picking performance has been compared with the main detail wavelet component combining-based kurtosis (WDC-K) picker, the single wavelet component-based kurtosis (SW-K) picker, and certain main wavelet component-based maximum kurtosis (MMW-K) picker. The comparison has demonstrated that the WD-K picker has better picking accuracy than the other three-wavelet and kurtosis-based pickers, thus showing the enhanced ability of wavelet denoising.

Immediate Feedback on Accuracy and Performance: The Effects of Wireless Technology on Food Safety Tracking at a Distribution Center

ERIC Educational Resources Information Center

Goomas, David T.

2012-01-01

The effects of wireless ring scanners, which provided immediate auditory and visual feedback, were evaluated to increase the performance and accuracy of order selectors at a meat distribution center. The scanners not only increased performance and accuracy compared to paper pick sheets, but were also instrumental in immediate and accurate data…

Neural stem cell implantation extends life in Niemann-Pick C1 mice.

PubMed

Ahmad, Iram; Hunter, Robert E; Flax, Jonathan D; Snyder, Evan Y; Erickson, Robert P

2007-01-01

In order to evaluate the phenotypic effects of implanted neural stem cells (NSCs) in the mouse model of Niemann-Pick C (NPC) disease, we injected a well-characterized clone of murine NSCs into the cerebella of neonatal Npc1(-/-) and control mice. The implanted cells survived and were abundant in some regions of the cerebellum. Life span was lengthened in NPC mice with the implanted NSCs. However, the rate of weight gain and subsequent weight loss, resulting from neurodegeneration, was not significantly different from un-injected controls. Ataxia was measured by Rota-Rod performance. The overall rate of decline in time on the Rota-Rod was not significantly slowed down. Thus, in this small group of NPC mice, a single administration in the neonatal period of the NSCs (which were not engineered to over-express the missing gene and not directed into the parenchyma) was only partially therapeutic.

Order-picking in deep cold--physiological responses of younger and older females. Part 2: body core temperature and skin surface temperature.

PubMed

Baldus, Sandra; Kluth, Karsten; Strasser, Helmut

2012-01-01

So far, it was unclear to what extent working in deep cold-storage depots has an influence on female order-pickers body core temperature and skin surface temperature considering different age groups. Physiological effects of order-picking in a chill room (+3°C) and cold store (-24°C) were examined on 30 female subjects (Ss), classified in two age groups (20- to 35- year-olds and 40- to 65-year-olds). The body core temperature was taken every 15 min at the tympanum and the skin surface temperature was recorded continuously at seven different positions. Working in the chill room induced a decrease of the body core temperature up to 0.5K in comparison to the value at the outset for both age groups which could be compensated by all Ss during the breaks. Working in the cold store caused a decline up to 1.1K for the younger Ss and 1.3K for the older Ss. A complete warming-up during the breaks was often not possible. Regarding the skin surface temperature, working in the chill room can be considered as unproblematic, whereas significantly lower temperatures at nose, fingers and toes, associated with substantial negative subjective sensations, were recorded while working in the cold store.

On the inlet vortex system. [preventing jet engine damage caused by debris pick-up

NASA Technical Reports Server (NTRS)

Bissinger, N. C.; Braun, G. W.

1974-01-01

The flow field of a jet engine with an inlet vortex, which can pick up heavy debris from the ground and damage the engine, was simulated in a small water tunnel by means of the hydrogen bubble technique. It was found that the known engine inlet vortex is accompained by a vortex system, consisting of two inlet vortices (the ground based and the trailing one), secondary vortices, and ground vortices. Simulation of the ground effect by an inlet image proved that the inlet vortex feeds on free stream vorticity and can exist without the presence of a ground boundary layer. The structural form of the inlet vortex system was explained by a simple potential flow model, which showed the number, location, and the importance of the stagnation points. A retractable horizontal screen or an up-tilt of the engine is suggested as countermeasure against debris ingestion.

Picking Deep Filter Responses for Fine-Grained Image Recognition (Open Access Author’s Manuscript)

DTIC Science & Technology

2016-12-16

stages. Our method explores a unified framework based on two steps of deep filter response picking. The first picking step is to find distinctive... filters which respond to specific patterns significantly and consistently, and learn a set of part detectors via iteratively alternating between new...positive sample mining and part model retraining. The second picking step is to pool deep filter responses via spatially weighted combination of Fisher

The relationship among neurocognitive performances and biopsychosocial characteristics of elite National Football League draft picks: an exploratory investigation.

PubMed

Solomon, Gary S; Haase, Richard F; Kuhn, Andrew

2013-02-01

Sports neuropsychology has emerged as a specialty area within the field of clinical neuropsychology. The role of the sports neuropsychologist, rooted in baseline and post-concussion testing, has evolved to include other clinical domains, including the clinical assessment of potential draft picks. There is no published information on the neurocognitive characteristics of these draft picks. We sought to determine whether elite NFL draft picks differed from NFL roster athletes on neurocognitive (ImPACT) and biopsychosocial characteristics, and given that no published data exists for this population, adopted null hypotheses. Null hypotheses were rejected for two of the four ImPACT scores, as elite draft picks scored higher on measures of visual motor speed and reaction time than roster NFL athletes. Subtle but distinct neurocognitive differences are noted when comparing elite NFL draft picks with norms from a cumulative roster of a single NFL team.

Evaluation of upper extremity robot-assistances in subacute and chronic stroke subjects.

PubMed

Ziherl, Jaka; Novak, Domen; Olenšek, Andrej; Mihelj, Matjaž; Munih, Marko

2010-10-18

Robotic systems are becoming increasingly common in upper extremity stroke rehabilitation. Recent studies have already shown that the use of rehabilitation robots can improve recovery. This paper evaluates the effect of different modes of robot-assistances in a complex virtual environment on the subjects' ability to complete the task as well as on various haptic parameters arising from the human-robot interaction. The MIMICS multimodal system that includes the haptic robot HapticMaster and a dynamic virtual environment is used. The goal of the task is to catch a ball that rolls down a sloped table and place it in a basket above the table. Our study examines the influence of catching assistance, pick-and-place movement assistance and grasping assistance on the catching efficiency, placing efficiency and on movement-dependent parameters: mean reaching forces, deviation error, mechanical work and correlation between the grasping force and the load force. The results with groups of subjects (23 subacute hemiparetic subjects, 10 chronic hemiparetic subjects and 23 control subjects) showed that the assistance raises the catching efficiency and pick-and-place efficiency. The pick-and-place movement assistance greatly limits the movements of the subject and results in decreased work toward the basket. The correlation between the load force and the grasping force exists in a certain phase of the movement. The results also showed that the stroke subjects without assistance and the control subjects performed similarly. The robot-assistances used in the study were found to be a possible way to raise the catching efficiency and efficiency of the pick-and-place movements in subacute and chronic subjects. The observed movement parameters showed that robot-assistances we used for our virtual task should be improved to maximize physical activity.

Wavelet-based automatic determination of the P- and S-wave arrivals

NASA Astrophysics Data System (ADS)

Bogiatzis, P.; Ishii, M.

2013-12-01

The detection of P- and S-wave arrivals is important for a variety of seismological applications including earthquake detection and characterization, and seismic tomography problems such as imaging of hydrocarbon reservoirs. For many years, dedicated human-analysts manually selected the arrival times of P and S waves. However, with the rapid expansion of seismic instrumentation, automatic techniques that can process a large number of seismic traces are becoming essential in tomographic applications, and for earthquake early-warning systems. In this work, we present a pair of algorithms for efficient picking of P and S onset times. The algorithms are based on the continuous wavelet transform of the seismic waveform that allows examination of a signal in both time and frequency domains. Unlike Fourier transform, the basis functions are localized in time and frequency, therefore, wavelet decomposition is suitable for analysis of non-stationary signals. For detecting the P-wave arrival, the wavelet coefficients are calculated using the vertical component of the seismogram, and the onset time of the wave is identified. In the case of the S-wave arrival, we take advantage of the polarization of the shear waves, and cross-examine the wavelet coefficients from the two horizontal components. In addition to the onset times, the automatic picking program provides estimates of uncertainty, which are important for subsequent applications. The algorithms are tested with synthetic data that are generated to include sudden changes in amplitude, frequency, and phase. The performance of the wavelet approach is further evaluated using real data by comparing the automatic picks with manual picks. Our results suggest that the proposed algorithms provide robust measurements that are comparable to manual picks for both P- and S-wave arrivals.

PDZ binding to the BAR domain of PICK1 is elucidated by coarse-grained molecular dynamics.

PubMed

He, Yi; Liwo, Adam; Weinstein, Harel; Scheraga, Harold A

2011-01-07

A key regulator of α-amino-3-hydroxy-5-methylisoxazole-4-propionic acid (AMPA) receptor traffic, PICK1 is known to interact with over 40 other proteins, including receptors, transporters and ionic channels, and to be active mostly as a homodimer. The current lack of a complete PICK1 structure determined at atomic resolution hinders the elucidation of its functional mechanisms. Here, we identify interactions between the component PDZ and BAR domains of PICK1 by calculating possible binding sites for the PDZ domain of PICK1 (PICK1-PDZ) to the homology-modeled, crescent-shaped dimer of the PICK1-BAR domain using multiplexed replica-exchange molecular dynamics (MREMD) and canonical molecular dynamics simulations with the coarse-grained UNRES force field. The MREMD results show that the preferred binding site for the single PDZ domain is the concave cavity of the BAR dimer. A second possible binding site is near the N-terminus of the BAR domain that is linked directly to the PDZ domain. Subsequent short canonical molecular dynamics simulations used to determine how the PICK1-PDZ domain moves to the preferred binding site on the BAR domain of PICK1 revealed that initial hydrophobic interactions drive the progress of the simulated binding. Thus, the concave face of the BAR dimer accommodates the PDZ domain first by weak hydrophobic interactions and then the PDZ domain slides to the center of the concave face, where more favorable hydrophobic interactions take over. Copyright © 2010 Elsevier Ltd. All rights reserved.

Parkin-mediated Monoubiquitination of the PDZ Protein PICK1 Regulates the Activity of Acid-sensing Ion Channels

PubMed Central

Joch, Monica; Ase, Ariel R.; Chen, Carol X.-Q.; MacDonald, Penny A.; Kontogiannea, Maria; Corera, Amadou T.; Brice, Alexis

2007-01-01

Mutations in the parkin gene result in an autosomal recessive juvenile-onset form of Parkinson's disease. As an E3 ubiquitin-ligase, parkin promotes the attachment of ubiquitin onto specific substrate proteins. Defects in the ubiquitination of parkin substrates are therefore believed to lead to neurodegeneration in Parkinson's disease. Here, we identify the PSD-95/Discs-large/Zona Occludens-1 (PDZ) protein PICK1 as a novel parkin substrate. We find that parkin binds PICK1 via a PDZ-mediated interaction, which predominantly promotes PICK1 monoubiquitination rather than polyubiquitination. Consistent with monoubiquitination and recent work implicating parkin in proteasome-independent pathways, parkin does not promote PICK1 degradation. However, parkin regulates the effects of PICK1 on one of its other PDZ partners, the acid-sensing ion channel (ASIC). Overexpression of wild-type, but not PDZ binding– or E3 ubiquitin-ligase–defective parkin abolishes the previously described, protein kinase C-induced, PICK1-dependent potentiation of ASIC2a currents in non-neuronal cells. Conversely, the loss of parkin in hippocampal neurons from parkin knockout mice unmasks prominent potentiation of native ASIC currents, which is normally suppressed by endogenous parkin in wild-type neurons. Given that ASIC channels contribute to excitotoxicity, our work provides a mechanism explaining how defects in parkin-mediated PICK1 monoubiquitination could enhance ASIC activity and thereby promote neurodegeneration in Parkinson's disease. PMID:17553932

Secondary isocurvature perturbations from acoustic reheating

NASA Astrophysics Data System (ADS)

Ota, Atsuhisa; Yamaguchi, Masahide

2018-06-01

The superhorizon (iso)curvature perturbations are conserved if the following conditions are satisfied: (i) (each) non adiabatic pressure perturbation is zero, (ii) the gradient terms are ignored, that is, at the leading order of the gradient expansion (iii) (each) total energy momentum tensor is conserved. We consider the case with the violation of the last two requirements and discuss the generation of secondary isocurvature perturbations during the late time universe. Second order gradient terms are not necessarily ignored even if we are interested in the long wavelength modes because of the convolutions which may pick products of short wavelength perturbations up. We then introduce second order conserved quantities on superhorizon scales under the conditions (i) and (iii) even in the presence of the gradient terms by employing the full second order cosmological perturbation theory. We also discuss the violation of the condition (iii), that is, the energy momentum tensor is conserved for the total system but not for each component fluid. As an example, we explicitly evaluate second order heat conduction between baryons and photons due to the weak Compton scattering, which dominates during the period just before recombination. We show that such secondary effects can be recast into the isocurvature perturbations on superhorizon scales if the local type primordial non Gaussianity exists a priori.

Portable guided-mode resonance biosensor platform for point-of-care testing

NASA Astrophysics Data System (ADS)

Sung, Gun Yong; Kim, Wan-Joong; Ko, Hyunsung; Kim, Bong K.; Kim, Kyung-Hyun; Huh, Chul; Hong, Jongcheol

2012-10-01

It represents a viable solution for the realization of a portable biosensor platform that could screen/diagnose acute myocardial infarction by measuring cardiac marker concentrations such as cardiac troponin I (cTnI), creatine kinase MB (CK-MB), and myoglobin (MYO) for application to u-health monitoring system. The portable biosensor platform introduced in this presentation has a more compact structure and a much higher measuring resolution than a conventional spectrometer system. Portable guided-mode resonance (GMR) biosensor platform was composed of a biosensor chip stage, an optical pick-up module, and a data display panel. Disposable plastic GMR biosensor chips with nano-grating patterns were fabricated by injection-molding. Whole blood filtration and label-free immunoassay were performed on these single chips, automatically. Optical pick-up module was fabricated by using the miniaturized bulk optics and the interconnecting optical fibers and a tunable VCSEL (vertical cavity surface emitting laser). The reflectance spectrum from the GMR biosensor was measured by the optical pick-up module. Cardiac markers in human serum with concentrations less than 0.1ng/mL were analyzed using a GMR biosensor. Analysis time was 30min, which is short enough to meet clinical requirements. Our results show that the GMR biosensor will be very useful in developing lowcost portable biosensors that can screen for cardiac diseases.

Automated identification of ERP peaks through Dynamic Time Warping: an application to developmental dyslexia.

PubMed

Assecondi, Sara; Bianchi, A M; Hallez, H; Staelens, S; Casarotto, S; Lemahieu, I; Chiarenza, G A

2009-10-01

This article proposes a method to automatically identify and label event-related potential (ERP) components with high accuracy and precision. We present a framework, referred to as peak-picking Dynamic Time Warping (ppDTW), where a priori knowledge about the ERPs under investigation is used to define a reference signal. We developed a combination of peak-picking and Dynamic Time Warping (DTW) that makes the temporal intervals for peak-picking adaptive on the basis of the morphology of the data. We tested the procedure on experimental data recorded from a control group and from children diagnosed with developmental dyslexia. We compared our results with the traditional peak-picking. We demonstrated that our method achieves better performance than peak-picking, with an overall precision, recall and F-score of 93%, 86% and 89%, respectively, versus 93%, 80% and 85% achieved by peak-picking. We showed that our hybrid method outperforms peak-picking, when dealing with data involving several peaks of interest. The proposed method can reliably identify and label ERP components in challenging event-related recordings, thus assisting the clinician in an objective assessment of amplitudes and latencies of peaks of clinical interest.

Development of multi-layer crystal detector and related front end electronics

NASA Astrophysics Data System (ADS)

Cardarelli, R.; Di Ciaccio, A.; Paolozzi, L.

2014-05-01

A crystal (diamond) particle detector has been developed and tested, whose constitute elements are a multi-layer polycrystalline diamond and a pick-up system capable of collecting in parallel the charge produced in the layers. The charge is read with a charge-to-voltage amplifier (5-6 mV/fC) realized with bipolar junction transistors in order to minimize the effect of the detector capacitance. The tests performed with cosmic rays and at the beam test facility of Frascati with 500 MeV electrons in single electron mode operation have shown that a detector with 4-5 layers of 250 μm thickness each and 9 mm2 active area exhibits an upper limit of 150 ps time resolution for minimum ionizing particles at an operating voltage of about 350 V.

DIY Weights and Measures: Developing Your Own Calibration Methods Using Available Materials

NASA Astrophysics Data System (ADS)

Marchetto, P.

2017-12-01

In most cases, when a custom device is built, when an instrument arrives from the manufacturer, or when a piece of equipment is picked up from the store, it is assumed that it will just work, and that data from it will be completely reliable. This fundamental expectation by many scientists is completely unfounded. Between shipping, variable environmental conditions, and many other factors, sensing systems and instruments will be out of tolerance when used. In order to get them back in tolerance, or to at least find out what their uncertainties are, characterization is necessary. If adjustment to the device is possible, this is carried out and called a calibration. In this work, several ways of generating characterization and adjustment methods are discussed, with acoustic, hydraulic, and meteorological devices as examples.

Extension and modernisation of the system of municipal heat distribution networks and elimination of emission in the remaining sources

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ciurlik, L.

1995-12-31

After a preliminary conference held in November 1992, the MPEC SA made contact with 6 US companies so as to prepare offers and the implementation of joint projects. According to their assumptions, those tasks had been picked up and prepared in order to be useful in solving a part of problems related with technology and organization which would be encountered by the MPEC SA of that time. Those decisions were well-aimed, yet the long time that had elapsed till the moment of their implementation did affect them in part. The development of free market economy in Poland was taking placemore » without influencing the program assumptions. The MPEC SA was then interested in the enterprises which presented their activity.« less

Reducing Skin Picking via Competing Activities

ERIC Educational Resources Information Center

Lane, Kathleen Lynne; Thompson, Ada; Reske, Cara L.; Gable, Lauren M.; Barton-Arwood, Sally

2006-01-01

This study examined the outcomes of a competing activities intervention to decrease skin picking exhibited by a 9-year-old student with comorbid diagnoses. Results of an ABCBAB design revealed that the use of student-selected manipulatives resulted in reduced skin picking. (Contains 1 figure.)

Loglines. May - June 2011

DTIC Science & Technology

2011-06-01

chief of the Aerial Delivery and Textile Section. When orders for construction material peaked in 2010, the riggers helped pack about 200 air...ensures effective inspection programs and that SRM projects are scheduled to ensure critical defense missions can be fueled while the projects are...the Active Item Walk and Pick helps distribution workers quickly grab any of 8,000 items considered fast movers, such as washers and gaskets

Reaching to Throw Compared to Reaching to Place: A Comparison across Individuals with and without Developmental Coordination Disorder

ERIC Educational Resources Information Center

Wilmut, Kate; Byrne, Maia; Barnett, Anna L.

2013-01-01

When picking up an object, adults show a longer deceleration phase when the onward action has a greater precision requirement. Tailoring action in this way is thought to need forward modelling in order to predict the consequences of movement. Some evidence suggests that young children also tailor reaching in this way; however, how this skill…

Niemann-Pick disease, Type C: evidence for the deficiency of an activating factor stimulating sphingomyelin and glucocerebroside degradation.

PubMed

Christomanou, H

1980-10-01

1) Qualitative lipid analyses by thin-layer chromatography of 4 Niemann-Pick type C spleens confirmed sphingomyelin accumulation together with increase in the amount of glucocerebroside. 2) In the presence of crude sodium taurocholate as detergent, sphingomyelin degradation rates of normal and Niemann-Pick type C-cultured fibroblasts were fairly close under standard conditions at pH 5.0. In the absence of sodium taurocholate, sphingomyelinase activity was optimal at pH 4.0. Sphingomyelinase activities of fibroblasts from two patients with Niemann-Pick disease type C measured without detergent, were about 30% of that of controls. 3) Extracts from Gaucher spleen heated to 90 degrees C and devoid of sphingomyelinase activity stimulated at the optimal pH of 4.0 sphingomyelin degradation by cultured normal fibroblasts (2--4-fold, Niemann-Pick type C fibroblasts (5--9-fold), whereas similarly treated extracts from Niemann-Pick type C spleen showed no stimulation of sphingomyelin catabolism. Heated extracts from normal human spleen exhibited a smaller stimulation than that shown by Gaucher spleen. This stimulating effect could not be observed in fibroblasts from patients suffering from Niemann-Pick type B (sphingomyelinase defect). 4) Heat-treated extracts of Gaucher spleen were fractionated by ion exchange chromatography, isoelectric focusing and gel filtration. The active fractions obtained by these procedures stimulated sphingomyelin as well as glucocerebroside degradation and were absent from the corresponding Niemann-Pick type C preparations. Enriched activator preparations of Gaucher spleen stimulated sphingomyelinase activity of Niemann-Pick type C fibroblasts 25--38-fold and that of normal cells 3-fold. 5) The activating factor had an isoelectric point of 4.0 and an apparent molecular weight, as estimated by gel filtration, of 25000. Treatment with pronase E abolished its activity.

Whenever You Use a Computer You Are Using a Program Called an Operating System.

ERIC Educational Resources Information Center

Cook, Rick

1984-01-01

Examines design, features, and shortcomings of eight disk-based operating systems designed for general use that are popular or most likely to affect the future of microcomputing. Included are the CP/M family, MS-DOS, Apple DOS/ProDOS, Unix, Pick, the p-System, TRSDOS, and Macintosh/Lisa. (MBR)

The magnetic particle plume solar sail concept

NASA Astrophysics Data System (ADS)

Knuth, William H.

2000-01-01

A magnetic particle space radiator was proposed in the late 1950s as a means to dissipate waste heat from space nuclear systems. The concept was a plume of hot magnetic particles confined to and traversing a magnetic field produced by super conducting magnets in the space vehicle. The large surface area of the hot particles was expected to effectively radiate away the heat. The cooling particles followed along the lines of the magnetic field and eventually returned to the vehicle where they again picked up a fresh charge of waste heat for return out to the plume. This paper presents a new concept for consideration. The same basic magnetic particle plume idea is proposed in this paper, except the purpose of the plume would be to receive momentum (and possibly electric power) from the solar wind in the manner of a solar sail. Recent nano-technologies allow the magnetic particles to be 2-3 orders of magnitude smaller than envisioned for the heat radiator, and the magnetic field would be stronger than we envisioned in the '50s. The application of the magnetic solar sail would be for propelling space-faring vehicles on long duration exploration of the solar system and possibly beyond. A first look is provided at the elements of the system, together with an estimate of the thrust potential and the approximate weights of the system. The system appears to have the potential to develop on the order of 50lb and 100lb of thrust and weight on the order of 15,000lb .

Phenomenological characteristics, social problems, and the economic impact associated with chronic skin picking.

PubMed

Flessner, Christopher A; Woods, Douglas W

2006-11-01

In this study, the authors collected data on the demographic characteristics, phenomenology, and social and economic impact of skin picking. A total of 92 participants completed an anonymous, Internet-based survey through a link to the Trichotillomania Learning Center's home page. Results indicated that skin pickers experienced social, occupational, and academic impairment, a number of medical or mental health concerns, and financial burdens, which they attributed to skin picking. Results also revealed moderate, statistically significant relationships between skin picking severity and symptoms of depression, anxiety, and experiential avoidance. Subsequent mediational analyses demonstrated that the relationship between skin picking severity and symptoms of anxiety and depression was partially mediated by experiential avoidance. Implications, conclusions, and future areas of research are discussed.

Pellet inspection apparatus

DOEpatents

Wilks, Robert S.; Taleff, Alexander; Sturges, Jr., Robert H.

1982-01-01

Apparatus for inspecting nuclear fuel pellets in a sealed container for diameter, flaws, length and weight. The apparatus includes, in an array, a pellet pick-up station, four pellet inspection stations and a pellet sorting station. The pellets are delivered one at a time to the pick-up station by a vibrating bowl through a vibrating linear conveyor. Grippers each associated with a successive pair of the stations are reciprocable together to pick up a pellet at the upstream station of each pair and to deposit the pellet at the corresponding downstream station. The gripper jaws are opened selectively depending on the state of the pellets at the stations and the particular cycle in which the apparatus is operating. Inspection for diameter, flaws and length is effected in each case by a laser beam projected on the pellets by a precise optical system while each pellet is rotated by rollers. Each laser and its optical system are mounted in a container which is free standing on a precise surface and is provided with locating buttons which engage locating holes in the surface so that each laser and its optical system is precisely set. The roller stands are likewise free standing and are similarly precisely positioned. The diameter optical system projects a thin beam of light which scans across the top of each pellet and is projected on a diode array. The fl GOVERNMENT CONTRACT CLAUSE The invention herein described was made in the course of or under a contract or subcontract thereunder with the Department of Energy bearing No. EY-67-14-C-2170.

Simulated orbits of heavy planetary ions at Mars for different IMF configurations

NASA Astrophysics Data System (ADS)

Curry, Shannon; Luhmann, Janet; Livi, Roberto; Hara, Takuya; Dong, Chuanfei; Ma, Yingjuan; McFadden, James; Bougher, Stephen

2014-11-01

We present simulated detections of O+, O2+ and CO2+ ions at Mars along a virtual orbit in the Mars space environment. Planetary pick-up ions are formed through the direct interaction of the solar wind with the neutral upper atmosphere, causing the newly created ions to be picked up and accelerated by the background convective electric field. Because previous missions such as Mars Global Surveyor (MGS) and Mars Express (MEX) have not been able to measure the interplanetary magnetic field (IMF) components simultaneously with plasma measurements, the response of heavy planetary pick-up ions to changes in the IMF has not been well characterized. Using a steady-state multi-species MHD model to provide the background electric and magnetic fields, the Mars Test Particle (MTP) simulation can trace each of these particles along field lines in near-Mars space and construct virtual ion detections from a spacecraft orbit. Specifically, we will present energy-time spectrograms and velocity space distributions (VSDs) for a selection of orbits during different IMF configurations and solar cycle conditions. These simulated orbits have broader implications for how to measure ion escape. Using individual particle traces, the origin and trajectories of different ion populations can be analyzed in order to assess how and where they contribute to the total atmospheric escape rate, which is a major objective of the upcoming MAVEN mission.

Implant Impression Techniques for the Edentulous Jaw: A Summary of Three Studies.

PubMed

Stimmelmayr, Michael; Beuer, Florian; Edelhoff, Daniel; Güth, Jan-Frederik

2016-02-01

Precise implant-supported restorations require accurate impressions. Transfer, pick-up, and splinted pick-up are commonly used techniques. Several in vitro studies have compared these impression techniques; however, all studies used mechanical evaluation methods. The purpose of this study was to compare the discrepancies of these impression techniques digitally in vitro and in vivo. Four dental implants were inserted in ten polymer mandibular models bilaterally in the regions of the first molars and canines. Three different impressions were made of each model and the models (original and stone casts) were scanned and digitized. Clinically, four implants were inserted in ten edentulous jaws; transfer and splinted pick-up impressions were made. With inspection software, discrepancies between the different impressions were calculated. The mean discrepancies in the in vitro study of the original polymer model to stone casts were 124 ± 34 μm for the transfer type, 116 ± 46 μm for the pick-up type, and 80 ± 25 μm for the splinted pick-up type, resulting in a mean discrepancy between the transfer and splinted pick-up type of 44 μm (124 - 80 μm). Clinically, the mean discrepancy between these two impression techniques was 280 μm. The differing results between the transfer and splinted pick-up techniques of in vitro and in vivo data showed the need for clinical data; however, splinted pick-up impressions seemed to produce the most precise results. © 2015 by the American College of Prosthodontists.

Mass Notification for Higher Education

ERIC Educational Resources Information Center

Schneider, Tod

2010-01-01

Mass notification is a high priority in educational institutions. As the number of electronic communication devices has diversified, so has the complexity of designing an effective mass notification system. Picking the right system, with the right features, support services and price, can be daunting. This publication, updated quarterly due to…

Stochastic detecting images from strong noise field in visual communications

NASA Astrophysics Data System (ADS)

Cai, Defu

1991-11-01

Random noise interference in image pick-up and image transmission is an important restriction for vision systems. In this paper, interframe shift sampling (IFSS) transform has been used for diminishing noise interference and detecting weak image signal submerged by strong noise in communication systems.

Feasible pickup from intact ossicular chain with floating piezoelectric microphone.

PubMed

Kang, Hou-Yong; Na, Gao; Chi, Fang-Lu; Jin, Kai; Pan, Tie-Zheng; Gao, Zhen

2012-02-22

Many microphones have been developed to meet with the implantable requirement of totally implantable cochlear implant (TICI). However, a biocompatible one without destroying the intactness of the ossicular chain still remains under investigation. Such an implantable floating piezoelectric microphone (FPM) has been manufactured and shows an efficient electroacoustic performance in vitro test at our lab. We examined whether it pick up sensitively from the intact ossicular chain and postulated whether it be an optimal implantable one. Animal controlled experiment: five adult cats (eight ears) were sacrificed as the model to test the electroacoustic performance of the FPM. Three groups were studied: (1) the experiment group (on malleus): the FPM glued onto the handle of the malleus of the intact ossicular chains; (2) negative control group (in vivo): the FPM only hung into the tympanic cavity; (3) positive control group (Hy-M30): a HiFi commercial microphone placed close to the site of the experiment ear. The testing speaker played pure tones orderly ranged from 0.25 to 8.0 kHz. The FPM inside the ear and the HiFi microphone simultaneously picked up acoustic vibration which recorded as .wav files to analyze. The FPM transformed acoustic vibration sensitively and flatly as did the in vitro test across the frequencies above 2.0 kHz, whereas inefficiently below 1.0 kHz for its overloading mass. Although the HiFi microphone presented more efficiently than the FPM did, there was no significant difference at 3.0 kHz and 8.0 kHz. It is feasible to develop such an implantable FPM for future TICIs and TIHAs system on condition that the improvement of Micro Electromechanical System and piezoelectric ceramic material technology would be applied to reduce its weight and minimize its size.

Testing the eBEAR System in Japan

NASA Astrophysics Data System (ADS)

Hsu, H. C.; Chen, T. Y.; Tseng, T. L.

2016-12-01

The Central Weather Bureau of Taiwan has operated an earthquake early warning (EEW) system and issued warnings to schools and government agencies since 2014. The real-time seismic data streams are integrated by the Earthworm software. In order to rapidly process those data, some EEW modules were created under the Earthworm platform. The system is named Earthworm Based Earthquake Alarm Reporting (eBEAR) system, which is currently operating. The eBEAR system consists of new Earthworm modules for managing P-wave phase picking, trigger associations, hypocenter locations, magnitude estimations, and alert filtering prior to broadcasting. Online performance of the eBEAR system indicated that the average reporting times afforded by the system are approximately 15 and 26 seconds for inland and offshore earthquakes, respectively. During 2016 ML6.6 Meinong (Taiwan) earthquake, the eBEAR system was successfully issued after 12.8 seconds when the earthquake occurred. While performances of the eBEAR system are stable, accurate in most events in Taiwan, there are a limited number of recent, well-record, large earthquakes (M>7) available for testing it. In order to examine outcome of eBEAR for large earthquakes, we implemented offline test to the eBEAR system using 26 events in Japan with magnitude larger than 7.0 from 2008 to 2016. EEW systems of Taiwan and Japan have the same challengs, including inaccurate locations and poorly constrained for offshore and deep earthquakes in the initial stages due to limited station coverage. Therefore the testing of eBEAR system provides a good opportunity to examine the abilities of the eBEAR system.

Measuring Misinformation in Repeat Trial Pick 1 of 2 Tests.

ERIC Educational Resources Information Center

Henderson, Pamela W.; Buchanan, Bruce

1992-01-01

An extension is described to a product-testing model to account for misinformation among subjects that would lead them to perform incorrectly on "pick one of two" tests. The model is applied to a data set of 367 subjects picking 1 of 2 colas. Misinformation does exist. (SLD)

Picking the Right Horse? Dominant Maneuver in the Twenty-First Century

DTIC Science & Technology

1998-06-05

SUBTITLE Picking the Right Horse ? Dominant Maneuver in the Twenty-First Century 6.AUTH0RIS) Major Steven D. Russell, U.S. Army 7. PERFORMING...Z39-18 298-102 PICKING THE RIGHT HORSE ? DOMINANT MANEUVER IN THE TWENTY-FIRST CENTURY A thesis presented to the Faculty of the U.S. Army Command...unlimited. wc«’*u»»»«aBI PICKING THE RIGHT HORSE ? DOMINANT MANEUVER IN THE TWENTY-FIRST CENTURY A thesis presented to the Faculty of the U.S. Army

Morbidity and mortality in type B Niemann-Pick disease.

PubMed

McGovern, Margaret M; Lippa, Natalie; Bagiella, Emilia; Schuchman, Edward H; Desnick, Robert J; Wasserstein, Melissa P

2013-08-01

The purpose of this study was to perform a systematic evaluation of morbidity and mortality in type B Niemann-Pick disease. A total of 103 patients with Niemann-Pick disease (49 males, 54 females, age range: 1-72 years) participated in natural history studies through Mount Sinai's International Center for Types A and B Niemann-Pick Disease between 1992 and 2012. Serious morbidities included significant neurological, hepatic, and cardiac disease. Thirteen patients had some degree of neurological impairment. Nine patients had cirrhosis or liver failure requiring transplantation. Coronary artery and valvular heart disease were present in nine patients. Of note, only four patients were oxygen dependent, although progressive pulmonary disease is a well-described feature of Niemann-Pick disease. During the follow-up period, 18 deaths occurred. The median age of death was 15.5 years (range 1-72). Causes of death included pneumonia, liver failure, and hemorrhage. The majority of deaths (12 of 18) occurred in patients <21 years, yielding a mortality rate of 19% in the pediatric population. This study demonstrates that Niemann-Pick disease is a life-threatening disorder with significant morbidity and mortality, especially in the pediatric population. The information collected in this series highlights the need for safe, effective therapy for Niemann-Pick disease.

A differential detection scheme of spectral shifts in long-period fiber gratings

NASA Astrophysics Data System (ADS)

Zhelyazkova, Katerina; Eftimov, Tinko; Smietana, Mateusz; Bock, Wojtek

2010-10-01

In this work we present an analysis of the response of a compact, simple and inexpensive optoelectronic sensor system intended to detect spectral shifts of a long-period fiber grating (LPG). The system makes use of a diffraction grating and a couple of receiving optical fibers that pick up signals at two different wavelengths. This differential detection system provides the same useful information from an LPG-based sensor as with a conventional laboratory system using optical spectrum analyzers for monitoring the minimum offset of LPG. The design of the fiber detection pair as a function of the parameters of the dispersion grating, the pick-up fiber and the LPG parameters, is presented in detail. Simulation of the detection system responses is presented using real from spectral shifts in nano-coated LPGs caused by the evaporation of various liquids such as water, ethanol and acetone, which are examples of corrosive, flammable and hazardous substances. Fiber optic sensors with similar detection can find applications in structural health monitoring for moisture detection, monitoring the spillage of toxic and flammable substances in industry etc.

Lead us not into tanktation: a simulation modelling approach to gain insights into incentives for sporting teams to tank.

PubMed

Tuck, Geoffrey N; Whitten, Athol R

2013-01-01

Annual draft systems are the principal method used by teams in major sporting leagues to recruit amateur players. These draft systems frequently take one of three forms: a lottery style draft, a weighted draft, or a reverse-order draft. Reverse-order drafts can create incentives for teams to deliberately under-perform, or tank, due to the perceived gain from obtaining quality players at higher draft picks. This paper uses a dynamic simulation model that captures the key components of a win-maximising sporting league, including the amateur player draft, draft choice error, player productivity, and between-team competition, to explore how competitive balance and incentives to under-perform vary according to league characteristics. We find reverse-order drafts can lead to some teams cycling between success and failure and to other teams being stuck in mid-ranking positions for extended periods of time. We also find that an incentive for teams to tank exists, but that this incentive decreases (i) as uncertainty in the ability to determine quality players in the draft increases, (ii) as the number of teams in the league reduces, (iii) as team size decreases, and (iv) as the number of teams adopting a tanking strategy increases. Simulation models can be used to explore complex stochastic dynamic systems such as sports leagues, where managers face difficult decisions regarding the structure of their league and the desire to maintain competitive balance.

Lead Us Not into Tanktation: A Simulation Modelling Approach to Gain Insights into Incentives for Sporting Teams to Tank

PubMed Central

Tuck, Geoffrey N.; Whitten, Athol R.

2013-01-01

Annual draft systems are the principal method used by teams in major sporting leagues to recruit amateur players. These draft systems frequently take one of three forms: a lottery style draft, a weighted draft, or a reverse-order draft. Reverse-order drafts can create incentives for teams to deliberately under-perform, or tank, due to the perceived gain from obtaining quality players at higher draft picks. This paper uses a dynamic simulation model that captures the key components of a win-maximising sporting league, including the amateur player draft, draft choice error, player productivity, and between-team competition, to explore how competitive balance and incentives to under-perform vary according to league characteristics. We find reverse-order drafts can lead to some teams cycling between success and failure and to other teams being stuck in mid-ranking positions for extended periods of time. We also find that an incentive for teams to tank exists, but that this incentive decreases (i) as uncertainty in the ability to determine quality players in the draft increases, (ii) as the number of teams in the league reduces, (iii) as team size decreases, and (iv) as the number of teams adopting a tanking strategy increases. Simulation models can be used to explore complex stochastic dynamic systems such as sports leagues, where managers face difficult decisions regarding the structure of their league and the desire to maintain competitive balance. PMID:24312243

Heuristic Strategies for Persuader Selection in Contagions on Complex Networks.

PubMed

Wang, Peng; Zhang, Li-Jie; Xu, Xin-Jian; Xiao, Gaoxi

2017-01-01

Individual decision to accept a new idea or product is often driven by both self-adoption and others' persuasion, which has been simulated using a double threshold model [Huang et al., Scientific Reports 6, 23766 (2016)]. We extend the study to consider the case with limited persuasion. That is, a set of individuals is chosen from the population to be equipped with persuasion capabilities, who may succeed in persuading their friends to take the new entity when certain conditions are satisfied. Network node centrality is adopted to characterize each node's influence, based on which three heuristic strategies are applied to pick out persuaders. We compare these strategies for persuader selection on both homogeneous and heterogeneous networks. Two regimes of the underline networks are identified in which the system exhibits distinct behaviors: when networks are sufficiently sparse, selecting persuader nodes in descending order of node centrality achieves the best performance; when networks are sufficiently dense, however, selecting nodes with medium centralities to serve as the persuaders performs the best. Under respective optimal strategies for different types of networks, we further probe which centrality measure is most suitable for persuader selection. It turns out that for the first regime, degree centrality offers the best measure for picking out persuaders from homogeneous networks; while in heterogeneous networks, betweenness centrality takes its place. In the second regime, there is no significant difference caused by centrality measures in persuader selection for homogeneous network; while for heterogeneous networks, closeness centrality offers the best measure.

Lysosome and endoplasmic reticulum quality control pathways in Niemann-Pick type C disease

PubMed Central

Schultz, Mark L.; Krus, Kelsey L.; Lieberman, Andrew P.

2017-01-01

Lysosomal storage diseases result from inherited deficiencies of lysosomal hydrolytic activities or lipid transport. Collectively, these disorders are a common cause of morbidity in the pediatric population and are often associated with severe neurodegeneration. Among this group of diseases is Niemann-Pick type C, an autosomal recessive disorder of lipid trafficking that causes cognitive impairment, ataxia and death, most often in childhood. Here, we review the current knowledge of disease pathogenesis, with particular focus on insights gleaned from genetics and the study of model systems. Critical advances in understanding mechanisms that regulate intracellular cholesterol trafficking have emerged from this work and are highlighted. We review effects of disease-causing mutations on quality control pathways involving the lysosome and endoplasmic reticulum, and discuss how they function to clear the most common mutant protein found in Niemann-Pick type C patients, NPC1-I1061T. Finally, we summarize insights into the mechanisms that degrade misfolded transmembrane proteins in the endoplasmic reticulum and how manipulating these quality control pathways may lead to the identification of novel targets for disease-modifying therapies. PMID:27026653

The age, growth, sexual maturity, and sex ratio of the common whitefish, Coregonus clupeaformis (Mitchill), of Lake Huron

USGS Publications Warehouse

Van Oosten, John

1939-01-01

During five years (1939-43) of nutritional research on pen-reared bobwhite quail at the Patuxent Research Refuge, Bowie, Maryland, observations on picking among birds of all ages showed the following results: 1. Picking occurred on all grains tested: corn, wheat, oats, oat groats, barley, millet, buckwheat, kaffir, and mixtures of cereals. The lowest incidence was with buckwheat as the sole grain in a growing diet....2. Picking occurred on all levels of fiber from one to 11per cent in a growing diet....3. Picking occurred on various grinds of corn, barley, and oats, but was least when these cereals were ground in a hammer mill with 3/32 inch mesh screen....4. The incidence was as high on diets containing animal protein as on those containing no animal protein. ....5. After picking began, the addition of one or two per cent of salt to the diet for several days was effective, in many instances, in checking the disorder. Results at the Refuge and the answers to questionnaires from 222 private propagators of gamebirds showed that in two-thirds. of the cases, treatment with an increased quantity of salt successfully stopped the trouble. As a preventative, however, salt was of little value. Picking occurred on both low and high levels of salt.....6. Supplementing the regular diet with certain feed concentrates such as fishmeal, soybean oil meal, liver meal, or chopped greens offered in a separate feeder for a day or two, was as efficacious as the addition of salt.....7. More picking occurred among quail chicks on a 22 per cent level of protein than on higher levels.....8. There was less picking on diets relished by the birds than on those seemingly unpalatable.....9. There was no correlation. between the amount of floor space per chick and the incidence of picking.....10. Increasing the feeding and drinking space seemed to have a marked beneficial effect.....11. Some adult birds on wire floors resorted to self-picking of their feet after the toes were frost-bitten.

Visually guided grasping to study teleprogrammation within the BAROCO testbed

NASA Technical Reports Server (NTRS)

Devy, M.; Garric, V.; Delpech, M.; Proy, C.

1994-01-01

This paper describes vision functionalities required in future orbital laboratories; in such systems, robots will be needed in order to execute the on-board scientific experiments or servicing and maintenance tasks under the remote control of ground operators. For this sake, ESA has proposed a robotic configuration called EMATS; a testbed has been developed by ESTEC in order to evaluate the potentialities of EMATS-like robot to execute scientific tasks in automatic mode. For the same context, CNES develops the BAROCO testbed to investigate remote control and teleprogrammation, in which high level primitives like 'Pick Object A' are provided as basic primitives. In nominal situations, the system has an a priori knowledge about the position of all objects. These positions are not very accurate, but this knowledge is sufficient in order to predict the position of the object which must be grasped, with respect to the manipulator frame. Vision is required in order to insure a correct grasping and to guarantee a good accuracy for the following operations. We describe our results about a visually guided grasping of static objects. It seems to be a very classical problem, and a lot of results are available. But, in many cases, it lacks a realistic evaluation of the accuracy, because such an evaluation requires tedious experiments. We propose several results about calibration of the experimental testbed, recognition algorithms required to locate a 3D polyhedral object, and the grasping itself.

A Nonparametric Approach to Automated S-Wave Picking

NASA Astrophysics Data System (ADS)

Rawles, C.; Thurber, C. H.

2014-12-01

Although a number of very effective P-wave automatic pickers have been developed over the years, automatic picking of S waves has remained more challenging. Most automatic pickers take a parametric approach, whereby some characteristic function (CF), e.g. polarization or kurtosis, is determined from the data and the pick is estimated from the CF. We have adopted a nonparametric approach, estimating the pick directly from the waveforms. For a particular waveform to be auto-picked, the method uses a combination of similarity to a set of seismograms with known S-wave arrivals and dissimilarity to a set of seismograms that do not contain S-wave arrivals. Significant effort has been made towards dealing with the problem of S-to-P conversions. We have evaluated the effectiveness of our method by testing it on multiple sets of microearthquake seismograms with well-determined S-wave arrivals for several areas around the world, including fault zones and volcanic regions. In general, we find that the results from our auto-picker are consistent with reviewed analyst picks 90% of the time at the 0.2 s level and 80% of the time at the 0.1 s level, or better. For most of the large datasets we have analyzed, our auto-picker also makes far more S-wave picks than were made previously by analysts. We are using these enlarged sets of high-quality S-wave picks to refine tomographic inversions for these areas, resulting in substantial improvement in the quality of the S-wave images. We will show examples from New Zealand, Hawaii, and California.

PhasePApy: A robust pure Python package for automatic identification of seismic phases

USGS Publications Warehouse

Chen, Chen; Holland, Austin

2016-01-01

We developed a Python phase identification package: the PhasePApy for earthquake data processing and near‐real‐time monitoring. The package takes advantage of the growing number of Python libraries including Obspy. All the data formats supported by Obspy can be supported within the PhasePApy. The PhasePApy has two subpackages: the PhasePicker and the Associator, aiming to identify phase arrival onsets and associate them to phase types, respectively. The PhasePicker and the Associator can work jointly or separately. Three autopickers are implemented in the PhasePicker subpackage: the frequency‐band picker, the Akaike information criteria function derivative picker, and the kurtosis picker. All three autopickers identify picks with the same processing methods but different characteristic functions. The PhasePicker triggers the pick with a dynamic threshold and can declare a pick with false‐pick filtering. Also, the PhasePicker identifies a pick polarity and uncertainty for further seismological analysis, such as focal mechanism determination. Two associators are included in the Associator subpackage: the 1D Associator and 3D Associator, which assign phase types to picks that can best fit potential earthquakes by minimizing root mean square (rms) residuals of the misfits in distance and time, respectively. The Associator processes multiple picks from all channels at a seismic station and aggregates them to increase computational efficiencies. Both associators use travel‐time look up tables to determine the best estimation of the earthquake location and evaluate the phase type for picks. The PhasePApy package has been used extensively for local and regional earthquakes and can work for active source experiments as well.

Project CHECO Southeast Asia Report. Rolling Thunder, July 1965 - December 1966

DTIC Science & Technology

1967-07-15

USAF and Hq SAC for their radar film libraries. Since the SEA area was relatively unphotographed by radar, this coverage was of vital importance...over the stereotyped tactics employed in our attacks against North Vietnamese targets. Pilots involved in these strikes were unanimous in their views...struck. Efforts would be made to provide jet aircraft pick-up immediately following film processing in order to expedite dispatch to Washington

"If I Had to Pick Any Subject, It Wouldn't Be Maths": Foundations for Engagement with Mathematics during the Middle Years

ERIC Educational Resources Information Center

Attard, Catherine

2013-01-01

This article is a report on a longitudinal case study that investigated the problem of lowered engagement with mathematics and students' perspectives of the factors that influenced their engagement during the middle years of schooling. The article provides a synthesis of the entire study and a summary of its findings. In order to address the…

Modeling picking on pharmaceutical tablets

NASA Astrophysics Data System (ADS)

Swaminathan, Shrikant

Tablets are the most popular solid dosage form in the pharmaceutical industry because they are cheap to manufacture, chemically and mechanically stable and easy to transport and fairly easy to control dosage. Pharmaceutical tableting operations have been around for decades however the process is still not well understood. One of the common problems faced during the production of pharmaceutical tablets by powder compaction is sticking of powder to the punch face, This is known as 'sticking'. A more specialized case of sticking is picking when the powder is pulled away form the compact in the vicinity of debossed features. In the pharmaceutical industry, picking is solved by trial and error which is an expensive, labor intensive and time consuming affair. The objective of this work was to develop, validate, and implement a modeling framework for predicting picking in powder compacts. The model was developed in Abaqus a commercially available finite element package. The resulting model was used to investigate the influence of debossed feature geometry viz. the stroke angle and degree of pre-pick, and, influence of lubricant on picking. (Abstract shortened by ProQuest.).

OMEGA System Performance Assessment and Coverage Evaluation (PACE) Workstation Design and Implementation. Volume 2

DTIC Science & Technology

1991-02-15

picked, Ce11Pop" .xmonth, CeliPcpUpA .hour’ . Phase kND $80) = 0 ELSE IF (stationinfol36’ [stations. picked, CellIP-- CpA .n=nh, CeSUP pP.hour . Phiase...CellGrid, irt (322,24. 281,314, RightCeliGridAction, ShoCe11~ta, DcNot-hingPr-oc, bJii ne (lfepnIi lfs t.Xj05,efIghplit. Y4, 60,16,white, blak , black...8217.Hilite(oc,yy); with CellPI~p do begin if (SubCells (Hcnth,Hr] .X < (Get~4axX - RightsideStatsA .width - SubCellIs (Month, Hour) Width - SubCellP~ cpA

Development and growth of fruit bodies and crops of the button mushroom, Agaricus bisporus.

PubMed

Straatsma, Gerben; Sonnenberg, Anton S M; van Griensven, Leo J L D

2013-10-01

We studied the appearance of fruit body primordia, the growth of individual fruit bodies and the development of the consecutive flushes of the crop. Relative growth, measured as cap expansion, was not constant. It started extremely rapidly, and slowed down to an exponential rate with diameter doubling of 1.7 d until fruit bodies showed maturation by veil breaking. Initially many outgrowing primordia were arrested, indicating nutritional competition. After reaching 10 mm diameter, no growth arrest occurred; all growing individuals, whether relatively large or small, showed an exponential increase of both cap diameter and biomass, until veil breaking. Biomass doubled in 0.8 d. Exponential growth indicates the absence of competition. Apparently there exist differential nutritional requirements for early growth and for later, continuing growth. Flushing was studied applying different picking sizes. An ordinary flushing pattern occurred at an immature picking size of 8 mm diameter (picking mushrooms once a day with a diameter above 8 mm). The smallest picking size yielded the highest number of mushrooms picked, confirming the competition and arrested growth of outgrowing primordia: competition seems less if outgrowing primordia are removed early. The flush duration (i.e. between the first and last picking moments) was not affected by picking size. At small picking size, the subsequent flushes were not fully separated in time but overlapped. Within 2 d after picking the first individuals of the first flush, primordia for the second flush started outgrowth. Our work supports the view that the acquisition of nutrients by the mycelium is demand rather than supply driven. For formation and early outgrowth of primordia, indications were found for an alternation of local and global control, at least in the casing layer. All these data combined, we postulate that flushing is the consequence of the depletion of some unknown specific nutrition required by outgrowing primordia. Copyright © 2013 The British Mycological Society. Published by Elsevier Ltd. All rights reserved.

An embedded real-time red peach detection system based on an OV7670 camera, ARM cortex-M4 processor and 3D look-up tables.

PubMed

Teixidó, Mercè; Font, Davinia; Pallejà, Tomàs; Tresanchez, Marcel; Nogués, Miquel; Palacín, Jordi

2012-10-22

This work proposes the development of an embedded real-time fruit detection system for future automatic fruit harvesting. The proposed embedded system is based on an ARM Cortex-M4 (STM32F407VGT6) processor and an Omnivision OV7670 color camera. The future goal of this embedded vision system will be to control a robotized arm to automatically select and pick some fruit directly from the tree. The complete embedded system has been designed to be placed directly in the gripper tool of the future robotized harvesting arm. The embedded system will be able to perform real-time fruit detection and tracking by using a three-dimensional look-up-table (LUT) defined in the RGB color space and optimized for fruit picking. Additionally, two different methodologies for creating optimized 3D LUTs based on existing linear color models and fruit histograms were implemented in this work and compared for the case of red peaches. The resulting system is able to acquire general and zoomed orchard images and to update the relative tracking information of a red peach in the tree ten times per second.

An Embedded Real-Time Red Peach Detection System Based on an OV7670 Camera, ARM Cortex-M4 Processor and 3D Look-Up Tables

PubMed Central

Teixidó, Mercè; Font, Davinia; Pallejà, Tomàs; Tresanchez, Marcel; Nogués, Miquel; Palacín, Jordi

2012-01-01

This work proposes the development of an embedded real-time fruit detection system for future automatic fruit harvesting. The proposed embedded system is based on an ARM Cortex-M4 (STM32F407VGT6) processor and an Omnivision OV7670 color camera. The future goal of this embedded vision system will be to control a robotized arm to automatically select and pick some fruit directly from the tree. The complete embedded system has been designed to be placed directly in the gripper tool of the future robotized harvesting arm. The embedded system will be able to perform real-time fruit detection and tracking by using a three-dimensional look-up-table (LUT) defined in the RGB color space and optimized for fruit picking. Additionally, two different methodologies for creating optimized 3D LUTs based on existing linear color models and fruit histograms were implemented in this work and compared for the case of red peaches. The resulting system is able to acquire general and zoomed orchard images and to update the relative tracking information of a red peach in the tree ten times per second. PMID:23202040

Comparison of magnetosonic wave and water group ion energy densities at Comet Giacobini-Zinner

NASA Technical Reports Server (NTRS)

Staines, K.; Balogh, A.; Cowley, S. W. H.; Forster, P. M. De F.; Hynds, R. J.; Yates, T. S.; Sanderson, T. R.; Wenzel, K.-P.; Tsurutani, B. T.

1991-01-01

Measurements of the Comet Giacobini-Zinner (GZ) are presented to determine to what extent wave-particle scattering redistributed the initial pick-up energy of the ion population. Also examined is the difference between the ion thermal energy and the energy in the magnetic fields of the waves. In spite of uncertainty of about a factor of 2 noted in the pick-up and mass-loaded regions, it is shown that less than approximately 50 percent of the pick-up energy is converted into wave magnetic energy in the inbound pick-up region.

Study on store-space assignment based on logistic AGV in e-commerce goods to person picking pattern

NASA Astrophysics Data System (ADS)

Xu, Lijuan; Zhu, Jie

2017-10-01

This paper studied on the store-space assignment based on logistic AGV in E-commerce goods to person picking pattern, and established the store-space assignment model based on the lowest picking cost, and design for store-space assignment algorithm after the cluster analysis based on similarity coefficient. And then through the example analysis, compared the picking cost between store-space assignment algorithm this paper design and according to item number and storage according to ABC classification allocation, and verified the effectiveness of the design of the store-space assignment algorithm.

Comparison of extent of tau pathology in patients with frontotemporal dementia with Parkinsonism linked to chromosome 17 (FTDP-17), frontotemporal lobar degeneration with Pick bodies and early onset Alzheimer's disease.

PubMed

Shiarli, A-M; Jennings, R; Shi, J; Bailey, K; Davidson, Y; Tian, J; Bigio, E H; Ghetti, B; Murrell, J R; Delisle, M B; Mirra, S; Crain, B; Zolo, P; Arima, K; Iseki, E; Murayama, S; Kretzschmar, H; Neumann, M; Lippa, C; Halliday, G; Mackenzie, J; Khan, N; Ravid, R; Dickson, D; Wszolek, Z; Iwatsubo, T; Pickering-Brown, S M; Mann, D M A

2006-08-01

In order to gain insight into the pathogenesis of frontotemporal lobar degeneration (FTLD), the mean tau load in frontal cortex was compared in 34 patients with frontotemporal dementia linked to chromosome 17 (FTDP-17) with 12 different mutations in the tau gene (MAPT), 11 patients with sporadic FTLD with Pick bodies and 25 patients with early onset Alzheimer's disease (EOAD). Tau load was determined, as percentage of tissue occupied by stained product, by image analysis of immunohistochemically stained sections using the phospho-dependent antibodies AT8, AT100 and AT180. With AT8 and AT180 antibodies, the amount of tau was significantly (P < 0.001 in each instance) less than that in EOAD for both FTDP-17 (8.5% and 10.0% respectively) and sporadic FTLD with Pick bodies (16.1% and 10.0% respectively). With AT100, the amount of tau detected in FTDP-17 was 54% (P < 0.001) of that detected in EOAD, but no tau was detected in sporadic FTLD with Pick bodies using this particular antibody. The amount of insoluble tau deposited within the brain in FTDP-17 did not depend in any systematic way upon where the MAPT mutation was topographically located within the gene, or on the physiological or structural change generated by the mutation, regardless of which anti-tau antibody was used. Not only does the amount of tau deposited in the brain differ between the three disorders, but the pattern of phosphorylation of tau also varies according to disease. These findings raise important questions relating to the role of aggregated tau in neurodegeneration - whether this represents an adaptive response which promotes the survival of neurones, or whether it is a detrimental change that directly, or indirectly, brings about the demize of the affected cell.

Where this occurs: Ground Water and Drinking Water

EPA Pesticide Factsheets

As ground water works its way through the soil, it can pick up excess nutrients and transport them to the water table. When polluted groundwater reaches drinking water systems it can pose serious public health threats.

PICKY: a novel SVD-based NMR spectra peak picking method.

PubMed

Alipanahi, Babak; Gao, Xin; Karakoc, Emre; Donaldson, Logan; Li, Ming

2009-06-15

Picking peaks from experimental NMR spectra is a key unsolved problem for automated NMR protein structure determination. Such a process is a prerequisite for resonance assignment, nuclear overhauser enhancement (NOE) distance restraint assignment, and structure calculation tasks. Manual or semi-automatic peak picking, which is currently the prominent way used in NMR labs, is tedious, time consuming and costly. We introduce new ideas, including noise-level estimation, component forming and sub-division, singular value decomposition (SVD)-based peak picking and peak pruning and refinement. PICKY is developed as an automated peak picking method. Different from the previous research on peak picking, we provide a systematic study of the proposed method. PICKY is tested on 32 real 2D and 3D spectra of eight target proteins, and achieves an average of 88% recall and 74% precision. PICKY is efficient. It takes PICKY on average 15.7 s to process an NMR spectrum. More important than these numbers, PICKY actually works in practice. We feed peak lists generated by PICKY to IPASS for resonance assignment, feed IPASS assignment to SPARTA for fragments generation, and feed SPARTA fragments to FALCON for structure calculation. This results in high-resolution structures of several proteins, for example, TM1112, at 1.25 A. PICKY is available upon request. The peak lists of PICKY can be easily loaded by SPARKY to enable a better interactive strategy for rapid peak picking.

17 CFR 240.17Ad-1 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-04-01

... or mails the item to, or the item is awaiting pick-up by, the presentor or a person designated by the... transfer agent dispatches or mails the item to, or the item is awaiting pick-up by, the outside registrar... registrar dispatches or mails the item to, or the item is awaiting pick-up by, the presenting transfer agent...

17 CFR 240.17Ad-1 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-04-01

... or mails the item to, or the item is awaiting pick-up by, the presentor or a person designated by the... transfer agent dispatches or mails the item to, or the item is awaiting pick-up by, the outside registrar... registrar dispatches or mails the item to, or the item is awaiting pick-up by, the presenting transfer agent...

Skin Picking in Turkish Students: Prevalence, Characteristics, and Gender Differences

ERIC Educational Resources Information Center

Calikusu, Celal; Kucukgoncu, Suat; Tecer, Ozlem; Bestepe, Emrem

2012-01-01

The aim of this study is to investigate the prevalence, characteristics, triggers, and consequences of skin picking (SP) in a sample of Turkish university students, with an emphasis on gender differences. A total of 245 students from two universities in Turkey were assessed by using the Skin Picking Inventory. In total, 87.8% of the students…

21 CFR 872.6650 - Massaging pick or tip for oral hygiene.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Massaging pick or tip for oral hygiene. 872.6650 Section 872.6650 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... hygiene. (a) Identification. A massaging pick or tip for oral hygiene is a rigid, pointed device intended...

Behavioral Treatment of Chronic Skin-Picking in Individuals with Developmental Disabilities: A Systematic Review

ERIC Educational Resources Information Center

Lang, Russell; Didden, Robert; Machalicek, Wendy; Rispoli, Mandy; Sigafoos, Jeff; Lancioni, Giulio; Mulloy, Austin; Regester, April; Pierce, Nigel; Kang, Soyeon

2010-01-01

Skin-picking is a type of self-injurious behavior involving the pulling, scratching, lancing, digging, or gouging of one's own body. It is associated with social impairment, and increased medical and mental health concerns. While there are several reports showing that skin-picking is common in individuals with developmental disabilities, knowledge…

Developments in fiber-positioning technology for the WEAVE instrument at the William Herschel Telescope

NASA Astrophysics Data System (ADS)

Schallig, Ellen; Lewis, Ian J.; Gilbert, James; Dalton, Gavin; Brock, Matthew; Abrams, Don Carlos; Middleton, Kevin; Aguerri, J. Alfonso L.; Bonifacio, Piercarlo; Carrasco, Esperanza; Trager, Scott C.; Vallenari, Antonella

2016-08-01

WEAVE is the next-generation wide-field optical spectroscopy facility for the William Herschel Telescope (WHT) on La Palma in the Canary Islands, Spain. It is a multi-object "pick-and-place" fibre-fed spectrograph with a 1000 fibre multiplex behind a new dedicated 2° prime focus corrector. The WEAVE positioner concept uses two robots working in tandem in order to reconfigure a fully populated field within the expected 1 hour dwell-time for the instrument (a good match between the required exposure times and the limit of validity for a given configuration due to the effects of differential refraction). In this paper we describe some of the final design decisions arising from the prototyping phase of the instrument design and provide an update on the current manufacturing status of the fibre positioner system.

Cherry recognition in natural environment based on the vision of picking robot

NASA Astrophysics Data System (ADS)

Zhang, Qirong; Chen, Shanxiong; Yu, Tingzhong; Wang, Yan

2017-04-01

In order to realize the automatic recognition of cherry in the natural environment, this paper designed a robot vision system recognition method. The first step of this method is to pre-process the cherry image by median filtering. The second step is to identify the colour of the cherry through the 0.9R-G colour difference formula, and then use the Otsu algorithm for threshold segmentation. The third step is to remove noise by using the area threshold. The fourth step is to remove the holes in the cherry image by morphological closed and open operation. The fifth step is to obtain the centroid and contour of cherry by using the smallest external rectangular and the Hough transform. Through this recognition process, we can successfully identify 96% of the cherry without blocking and adhesion.

Membrane Localization is Critical for Activation of the PICK1 BAR Domain

PubMed Central

Madsen, Kenneth L.; Eriksen, Jacob; Milan-Lobo, Laura; Han, Daniel S.; Niv, Masha Y.; Ammendrup-Johnsen, Ina; Henriksen, Ulla; Bhatia, Vikram K.; Stamou, Dimitrios; Sitte, Harald H.; McMahon, Harvey T.; Weinstein, Harel; Gether, Ulrik

2013-01-01

The PSD-95/Discs-large/ZO-1 homology (PDZ) domain protein, protein interacting with C kinase 1 (PICK1) contains a C-terminal Bin/amphiphysin/Rvs (BAR) domain mediating recognition of curved membranes; however, the molecular mechanisms controlling the activity of this domain are poorly understood. In agreement with negative regulation of the BAR domain by the N-terminal PDZ domain, PICK1 distributed evenly in the cytoplasm, whereas truncation of the PDZ domain caused BAR domain-dependent redistribution to clusters colocalizing with markers of recycling endosomal compartments. A similar clustering was observed both upon truncation of a short putative α-helical segment in the linker between the PDZ and the BAR domains and upon coexpression of PICK1 with a transmembrane PDZ ligand, including the alpha-amino-3-hydroxy-5-methyl-4-isoxazolepropionic acid (AMPA) receptor GluR2 subunit, the GluR2 C-terminus transferred to the single transmembrane protein Tac or the dopamine transporter C-terminus transferred to Tac. In contrast, transfer of the GluR2 C-terminus to cyan fluorescent protein, a cytosolic protein, did not elicit BAR domain-dependent clustering. Instead, localizing PICK1 to the membrane by introducing an N-terminal myristoylation site produced BAR domain-dependent, but ligand-independent, PICK1 clustering. The data support that in the absence of PDZ ligand, the PICK1 BAR domain is inhibited through a PDZ domain-dependent and linker-dependent mechanism. Moreover, they suggest that unmasking of the BAR domain’s membrane-binding capacity is not a consequence of ligand binding to the PDZ domain per se but results from, and coincides with, recruitment of PICK1 to a membrane compartment. PMID:18466293

A State of Growth

ERIC Educational Resources Information Center

Gibbs, Hope J.

2005-01-01

In Georgia, the technical college system is flourishing and offers the Peachtree State's students a number of career opportunities that are ripe for the picking. Georgia has invested more than one billion dollars in its technical college system. The investment was well worth it, as thousands of students were drawn to the newly built and modernized…

Automated peak picking and peak integration in macromolecular NMR spectra using AUTOPSY.

PubMed

Koradi, R; Billeter, M; Engeli, M; Güntert, P; Wüthrich, K

1998-12-01

A new approach for automated peak picking of multidimensional protein NMR spectra with strong overlap is introduced, which makes use of the program AUTOPSY (automated peak picking for NMR spectroscopy). The main elements of this program are a novel function for local noise level calculation, the use of symmetry considerations, and the use of lineshapes extracted from well-separated peaks for resolving groups of strongly overlapping peaks. The algorithm generates peak lists with precise chemical shift and integral intensities, and a reliability measure for the recognition of each peak. The results of automated peak picking of NOESY spectra with AUTOPSY were tested in combination with the combined automated NOESY cross peak assignment and structure calculation routine NOAH implemented in the program DYANA. The quality of the resulting structures was found to be comparable with those from corresponding data obtained with manual peak picking. Copyright 1998 Academic Press.

Design and simulation of integration system between automated material handling system and manufacturing layout in the automotive assembly line

NASA Astrophysics Data System (ADS)

Seha, S.; Zamberi, J.; Fairu, A. J.

2017-10-01

Material handling system (MHS) is an important part for the productivity plant and has recognized as an integral part of today’s manufacturing system. Currently, MHS has growth tremendously with its technology and equipment type. Based on the case study observation, the issue involving material handling system contribute to the reduction of production efficiency. This paper aims to propose a new design of integration between material handling and manufacturing layout by investigating the influences of layout and material handling system. A method approach tool using Delmia Quest software is introduced and the simulation result is used to assess the influences of the integration between material handling system and manufacturing layout in the performance of automotive assembly line. The result show, the production of assembly line output increases more than 31% from the current system. The source throughput rate average value went up to 252 units per working hour in model 3 and show the effectiveness of the pick-to-light system as efficient storage equipment. Thus, overall result shows, the application of AGV and the pick-to-light system gave a large significant effect in the automotive assembly line. Moreover, the change of layout also shows a large significant improvement to the performance.

Baseline studies on the feasibility of detecting a coal/shale interface with a self-powered sensitized pick

NASA Technical Reports Server (NTRS)

Anderson, G. R., II

1981-01-01

The feasibility of utilizing a sensitized pick to discriminate between cutting coal and roof material during the longwall mining process was investigated. A conventional longwall mining pick was instrumented and cutting force magnitudes were determined for a variety of materials, including Illinois #6 coal, shale type materials, and synthetic coal/shale materials.

Automatic microseismic event picking via unsupervised machine learning

NASA Astrophysics Data System (ADS)

Chen, Yangkang

2018-01-01

Effective and efficient arrival picking plays an important role in microseismic and earthquake data processing and imaging. Widely used short-term-average long-term-average ratio (STA/LTA) based arrival picking algorithms suffer from the sensitivity to moderate-to-strong random ambient noise. To make the state-of-the-art arrival picking approaches effective, microseismic data need to be first pre-processed, for example, removing sufficient amount of noise, and second analysed by arrival pickers. To conquer the noise issue in arrival picking for weak microseismic or earthquake event, I leverage the machine learning techniques to help recognizing seismic waveforms in microseismic or earthquake data. Because of the dependency of supervised machine learning algorithm on large volume of well-designed training data, I utilize an unsupervised machine learning algorithm to help cluster the time samples into two groups, that is, waveform points and non-waveform points. The fuzzy clustering algorithm has been demonstrated to be effective for such purpose. A group of synthetic, real microseismic and earthquake data sets with different levels of complexity show that the proposed method is much more robust than the state-of-the-art STA/LTA method in picking microseismic events, even in the case of moderately strong background noise.

Multilayer network decoding versatility and trust

NASA Astrophysics Data System (ADS)

Sarkar, Camellia; Yadav, Alok; Jalan, Sarika

2016-01-01

In the recent years, the multilayer networks have increasingly been realized as a more realistic framework to understand emergent physical phenomena in complex real-world systems. We analyze massive time-varying social data drawn from the largest film industry of the world under a multilayer network framework. The framework enables us to evaluate the versatility of actors, which turns out to be an intrinsic property of lead actors. Versatility in dimers suggests that working with different types of nodes are more beneficial than with similar ones. However, the triangles yield a different relation between type of co-actor and the success of lead nodes indicating the importance of higher-order motifs in understanding the properties of the underlying system. Furthermore, despite the degree-degree correlations of entire networks being neutral, multilayering picks up different values of correlation indicating positive connotations like trust, in the recent years. The analysis of weak ties of the industry uncovers nodes from a lower-degree regime being important in linking Bollywood clusters. The framework and the tools used herein may be used for unraveling the complexity of other real-world systems.

PICKY: a novel SVD-based NMR spectra peak picking method

PubMed Central

Alipanahi, Babak; Gao, Xin; Karakoc, Emre; Donaldson, Logan; Li, Ming

2009-01-01

Motivation: Picking peaks from experimental NMR spectra is a key unsolved problem for automated NMR protein structure determination. Such a process is a prerequisite for resonance assignment, nuclear overhauser enhancement (NOE) distance restraint assignment, and structure calculation tasks. Manual or semi-automatic peak picking, which is currently the prominent way used in NMR labs, is tedious, time consuming and costly. Results: We introduce new ideas, including noise-level estimation, component forming and sub-division, singular value decomposition (SVD)-based peak picking and peak pruning and refinement. PICKY is developed as an automated peak picking method. Different from the previous research on peak picking, we provide a systematic study of the proposed method. PICKY is tested on 32 real 2D and 3D spectra of eight target proteins, and achieves an average of 88% recall and 74% precision. PICKY is efficient. It takes PICKY on average 15.7 s to process an NMR spectrum. More important than these numbers, PICKY actually works in practice. We feed peak lists generated by PICKY to IPASS for resonance assignment, feed IPASS assignment to SPARTA for fragments generation, and feed SPARTA fragments to FALCON for structure calculation. This results in high-resolution structures of several proteins, for example, TM1112, at 1.25 Å. Availability: PICKY is available upon request. The peak lists of PICKY can be easily loaded by SPARKY to enable a better interactive strategy for rapid peak picking. Contact: mli@uwaterloo.ca PMID:19477998

With Geospatial in Path of Smart City

NASA Astrophysics Data System (ADS)

Homainejad, A. S.

2015-04-01

With growth of urbanisation, there is a requirement for using the leverage of smart city in city management. The core of smart city is Information and Communication Technologies (ICT), and one of its elements is smart transport which includes sustainable transport and Intelligent Transport Systems (ITS). Cities and especially megacities are facing urgent transport challenge in traffic management. Geospatial can provide reliable tools for monitoring and coordinating traffic. In this paper a method for monitoring and managing the ongoing traffic in roads using aerial images and CCTV will be addressed. In this method, the road network was initially extracted and geo-referenced and captured in a 3D model. The aim is to detect and geo-referenced any vehicles on the road from images in order to assess the density and the volume of vehicles on the roads. If a traffic jam was recognised from the images, an alternative route would be suggested for easing the traffic jam. In a separate test, a road network was replicated in the computer and a simulated traffic was implemented in order to assess the traffic management during a pick time using this method.

Towards a continuous glucose monitoring system using tunable quantum cascade lasers

NASA Astrophysics Data System (ADS)

Haase, Katharina; Müller, Niklas; Petrich, Wolfgang

2018-02-01

We present a reagent-free approach for long-term continuous glucose monitoring (cgm) of liquid samples using midinfrared absorption spectroscopy. This method could constitute an alternative to enzymatic glucose sensors in order to manage the widespread disease of Diabetes. In order to acquire spectra of the liquid specimen, we use a spectrally tunable external-cavity (EC-) quantum cascade laser (QCL) as radiation source in combination with a fiber-based in vitro sensor setup. Hereby we achieve a glucose sensitivity in pure glucose solutions of 3 mg/dL (RMSEP). Furthermore, the spectral tunability of the EC-QCL enables us to discriminate glucose from other molecules. We exemplify this by detecting glucose among other saccharides with an accuracy of 8 mg/dL (within other monosaccharides, RMSEVC) and 14 mg/dL (within other mono- and disaccharides, RMSECV). Moreover, we demonstrate a characterization of the significance of each wavenumber for an accurate prediction of glucose among other saccharides using an evolutionary algorithm. We show, that by picking 10 distinct wavenumbers we can achieve comparable accuracies to the use of a complete spectrum.

Pickless event detection and location: The waveform correlation event detection system (WCEDS) revisited

DOE PAGES

Arrowsmith, Stephen John; Young, Christopher J.; Ballard, Sanford; ...

2016-01-01

The standard paradigm for seismic event monitoring breaks the event detection problem down into a series of processing stages that can be categorized at the highest level into station-level processing and network-level processing algorithms (e.g., Le Bras and Wuster (2002)). At the station-level, waveforms are typically processed to detect signals and identify phases, which may subsequently be updated based on network processing. At the network-level, phase picks are associated to form events, which are subsequently located. Furthermore, waveforms are typically directly exploited only at the station-level, while network-level operations rely on earth models to associate and locate the events thatmore » generated the phase picks.« less

Continuous Access to Competing Stimulation as Intervention for Self-Injurious Skin Picking in a Child with Autism

ERIC Educational Resources Information Center

Ladd, Mara V.; Luiselli, James K.; Baker, Lorianne

2009-01-01

Children with autism frequently display self-injurious behavior (SIB), but skin picking--a less severe topography of SIB--has not been the focus of much clinical research. The present study evaluated a home-based intervention that was implemented with a 9-year-old girl who had autism and picked her fingers with resulting tissue damage. The…

The Neural Substrates Associated with Attentional Resources and Difficulty of Concurrent Processing of the Two Verbal Tasks

ERIC Educational Resources Information Center

Mizuno, Kei; Tanaka, Masaaki; Tanabe, Hiroki C.; Sadato, Norihiro; Watanabe, Yasuyoshi

2012-01-01

The kana pick-out test has been widely used in Japan to evaluate the ability to divide attention in both adult and pediatric patients. However, the neural substrates underlying the ability to divide attention using the kana pick-out test, which requires participants to pick out individual letters (vowels) in a story while also reading for…

Habit Reversal as a Treatment for Chronic Skin Picking: A Pilot Investigation

ERIC Educational Resources Information Center

Teng, Ellen J.; Woods, Douglas W.; Twohig, Michael P.

2006-01-01

The purpose of this study was to compare the effectiveness of habit reversal (HR) to a wait-list control as a treatment for chronic skin picking in adults. Twenty-five adults with a chronic skin-picking problem were randomly assigned to a wait-list control or HR group. At pretreatment, posttreatment, and a 3-month follow-up, self-reported skin…

Skin-Picking in Individuals with Prader-Willi Syndrome: Prevalence, Functional Assessment, and Its Comorbidity with Compulsive and Self-Injurious Behaviours

ERIC Educational Resources Information Center

Didden, Robert; Korzilius, Hubert; Curfs, Leopold M. G.

2007-01-01

Background: Individuals with Prader-Willi syndrome (PWS) are at increased risk for mental health and behaviour problems, such as skin-picking and compulsive behaviours. Prevalence and functional assessment of skin-picking, and its association with compulsive behaviour and self-injury, were investigated in a large group of individuals with PWS (n =…

Skills and offensive tactics used in pick-up basketball games.

PubMed

Wang, Jianyu; Liu, Wenhao; Moffit, Jeffrey

2009-10-01

The purpose of this study was to describe skills and offensive tactics frequently used in pick-up basketball games. 65 participants were recruited from public basketball courts. An observational instrument was developed to analyze the performances of pick-up games. Participants' performances were videotaped and coded. Results indicated that the passing skills most frequently observed in the games were chest pass, overhead pass, and bounce pass. For dribbling, crossover dribble and change-of-pace dribble were frequently observed. Jump shot, set shot, and layup were also frequently used. The offensive tactics frequently used included drive, cut, and set screen. The study may be beneficial for helping young people prepare to play pick-up basketball games.

High-Resolution 3-T Magnetic Resonance Imaging of the Shoulder in Nonsymptomatic Professional Baseball Pitcher Draft Picks.

PubMed

Del Grande, Filippo; Aro, Michael; Jalali Farahani, Sahar; Cosgarea, Andrew; Wilckens, John; Carrino, John A

2016-01-01

To retrospectively assess the qualitative and quantitative high-resolution 3-T magnetic resonance imaging (MRI) findings in nonsymptomatic baseball pitcher draft picks. Institutional review board-approved and HIPAA compliant study. Three-Tesla MRI of the dominant shoulder of 19 asymptomatic baseball pitcher draft picks and detailed clinical examination was performed before contract signing. Two radiologists performed independently qualitative and quantitative evaluation of shoulder structures. Descriptive statistics were performed. Sixty-eight percent (13/19), 32% (6/19), and 21% (4/19) of the baseball pitcher draft picks showed tendinopathy, partial thickness tendon tear of the supraspinatus, and acromioclavicular joint osteoarthritis, respectively. Glenohumeral subluxation, glenoid remodeling, and Bennett lesion were present in 53% (10/19), 79% (15/19), and 21% (4/19) of the subjects, respectively. Interclass coefficient was 0.633 to 0.863 and κ was 0.27 to 1. In asymptomatic baseball pitcher draft picks, 3-T MRI frequently shows abnormalities involving rotator cuff tendons, the coracohumeral, inferior glenohumeral, labrum, and osseous structures.

Beam current sensor

DOEpatents

Kuchnir, M.; Mills, F.E.

1984-09-28

A current sensor for measuring the dc component of a beam of charged particles employs a superconducting pick-up loop probe, with twisted superconducting leads in combination with a Superconducting Quantum Interference Device (SQUID) detector. The pick-up probe is in the form of a single-turn loop, or a cylindrical toroid, through which the beam is directed and within which a first magnetic flux is excluded by the Meisner effect. The SQUID detector acts as a flux-to-voltage converter in providing a current to the pick-up loop so as to establish a second magnetic flux within the electrode which nulls out the first magnetic flux. A feedback voltage within the SQUID detector represents the beam current of the particles which transit the pick-up loop. Meisner effect currents prevent changes in the magnetic field within the toroidal pick-up loop and produce a current signal independent of the beam's cross-section and its position within the toroid, while the combination of superconducting elements provides current measurement sensitivities in the nano-ampere range.

Radially Focused Eddy Current Sensor for Detection of Longitudinal Flaws in Metallic Tubes

NASA Technical Reports Server (NTRS)

Wincheski, Russell A. (Inventor); Simpson, John W. (Inventor); Fulton, James P. (Inventor); Nath, Shridhar C. (Inventor); Todhunter, Ronald G. (Inventor); Namkung, Min (Inventor)

1999-01-01

A radially focused eddy current sensor detects longitudinal flaws in a metal tube. A drive coil induces eddy currents within the wall of the metal tube. A pick-up cod is spaced apart from the drive coil along the length of the metal tube. The pick@up coil is positioned with one end thereof lying adjacent the wall of the metal tube such that the pick-up coil's longitudinal axis is perpendicular to the wall of the metal tube. To isolate the pick-up coil from the magnetic flux of the drive coil and the flux from the induced eddy currents. except the eddy currents diverted by a longitudinal flaw. an electrically conducting material high in magnetic permeability surrounds all of the pick-up coil except its one end that is adjacent the walls of the metal tube. The electrically conducting material can extend into and through the drive coil in a coaxial relationship therewith.

Beam current sensor

DOEpatents

Kuchnir, Moyses; Mills, Frederick E.

1987-01-01

A current sensor for measuring the DC component of a beam of charged particles employs a superconducting pick-up loop probe, with twisted superconducting leads in combination with a Superconducting Quantum Interference Device (SQUID) detector. The pick-up probe is in the form of a single-turn loop, or a cylindrical toroid, through which the beam is directed and within which a first magnetic flux is excluded by the Meisner effect. The SQUID detector acts as a flux-to-voltage converter in providing a current to the pick-up loop so as to establish a second magnetic flux within the electrode which nulls out the first magnetic flux. A feedback voltage within the SQUID detector represents the beam current of the particles which transit the pick-up loop. Meisner effect currents prevent changes in the magnetic field within the toroidal pick-up loop and produce a current signal independent of the beam's cross-section and its position within the toroid, while the combination of superconducting elements provides current measurement sensitivites in the nano-ampere range.

Dynamo Catalogue: Geometrical tools and data management for particle picking in subtomogram averaging of cryo-electron tomograms.

PubMed

Castaño-Díez, Daniel; Kudryashev, Mikhail; Stahlberg, Henning

2017-02-01

Cryo electron tomography allows macromolecular complexes within vitrified, intact, thin cells or sections thereof to be visualized, and structural analysis to be performed in situ by averaging over multiple copies of the same molecules. Image processing for subtomogram averaging is specific and cumbersome, due to the large amount of data and its three dimensional nature and anisotropic resolution. Here, we streamline data processing for subtomogram averaging by introducing an archiving system, Dynamo Catalogue. This system manages tomographic data from multiple tomograms and allows visual feedback during all processing steps, including particle picking, extraction, alignment and classification. The file structure of a processing project file structure includes logfiles of performed operations, and can be backed up and shared between users. Command line commands, database queries and a set of GUIs give the user versatile control over the process. Here, we introduce a set of geometric tools that streamline particle picking from simple (filaments, spheres, tubes, vesicles) and complex geometries (arbitrary 2D surfaces, rare instances on proteins with geometric restrictions, and 2D and 3D crystals). Advanced functionality, such as manual alignment and subboxing, is useful when initial templates are generated for alignment and for project customization. Dynamo Catalogue is part of the open source package Dynamo and includes tools to ensure format compatibility with the subtomogram averaging functionalities of other packages, such as Jsubtomo, PyTom, PEET, EMAN2, XMIPP and Relion. Copyright © 2016. Published by Elsevier Inc.

Automated Interval velocity picking for Atlantic Multi-Channel Seismic Data

NASA Astrophysics Data System (ADS)

Singh, Vishwajit

2016-04-01

This paper described the challenge in developing and testing a fully automated routine for measuring interval velocities from multi-channel seismic data. Various approaches are employed for generating an interactive algorithm picking interval velocity for continuous 1000-5000 normal moveout (NMO) corrected gather and replacing the interpreter's effort for manual picking the coherent reflections. The detailed steps and pitfalls for picking the interval velocities from seismic reflection time measurements are describe in these approaches. Key ingredients these approaches utilized for velocity analysis stage are semblance grid and starting model of interval velocity. Basin-Hopping optimization is employed for convergence of the misfit function toward local minima. SLiding-Overlapping Window (SLOW) algorithm are designed to mitigate the non-linearity and ill- possessedness of root-mean-square velocity. Synthetic data case studies addresses the performance of the velocity picker generating models perfectly fitting the semblance peaks. A similar linear relationship between average depth and reflection time for synthetic model and estimated models proposed picked interval velocities as the starting model for the full waveform inversion to project more accurate velocity structure of the subsurface. The challenges can be categorized as (1) building accurate starting model for projecting more accurate velocity structure of the subsurface, (2) improving the computational cost of algorithm by pre-calculating semblance grid to make auto picking more feasible.

Robust automated classification of first-motion polarities for focal mechanism determination with machine learning

NASA Astrophysics Data System (ADS)

Ross, Z. E.; Meier, M. A.; Hauksson, E.

2017-12-01

Accurate first-motion polarities are essential for determining earthquake focal mechanisms, but are difficult to measure automatically because of picking errors and signal to noise issues. Here we develop an algorithm for reliable automated classification of first-motion polarities using machine learning algorithms. A classifier is designed to identify whether the first-motion polarity is up, down, or undefined by examining the waveform data directly. We first improve the accuracy of automatic P-wave onset picks by maximizing a weighted signal/noise ratio for a suite of candidate picks around the automatic pick. We then use the waveform amplitudes before and after the optimized pick as features for the classification. We demonstrate the method's potential by training and testing the classifier on tens of thousands of hand-made first-motion picks by the Southern California Seismic Network. The classifier assigned the same polarity as chosen by an analyst in more than 94% of the records. We show that the method is generalizable to a variety of learning algorithms, including neural networks and random forest classifiers. The method is suitable for automated processing of large seismic waveform datasets, and can potentially be used in real-time applications, e.g. for improving the source characterizations of earthquake early warning algorithms.

Comparison of Estimation Techniques for the Four Parameter Beta Distribution.

DTIC Science & Technology

1981-12-01

Gnanadesikan , Pinkham, and Hughes in 1967 (Ref 11). It dealt with the standard beta, and performed the estimation using smallest order statistics. 22 22 The...convergence of the iterative scheme" (Ref 11:611). Beckman and Tietjen picked up on Gnanadesikan , et al., and developed a solution method which is "fast...zia (Second Edition). Reading, Massachusetts: Addison-Wesley Pub- lishing Company, 1978. 11. Gnanadesikan , R., R. S. Pinkham and L. P. Hughes. "Maximum

An analysis of the topography, severity, potential sources of reinforcement, and treatments utilized for skin picking in Prader-Willi syndrome.

PubMed

Hustyi, Kristin M; Hammond, Jennifer L; Rezvani, Ava B; Hall, Scott S

2013-09-01

We examined the topography, severity, potential sources of reinforcement, and treatments utilized for skin-picking behavior shown by individuals with Prader-Willi syndrome (PWS). The parents of 55 individuals with PWS, aged 6-25 years, were interviewed about their child's skin-picking behavior using the Self-Injury Trauma Scale (SIT; Iwata, Pace, Kissel, Nau, & Farber, 1990) and the Functional Analysis Screening Tool (FAST; Iwata, DeLeon, & Roscoe, 2013). Results showed that skin picking in PWS occurred on the extremities (i.e., arms, legs, hands, and feet) for 75% of cases and resulted in bodily injury for 83.7% cases. Skin picking posed a high risk to the individual concerned in 41.8% of cases. Automatic sensory stimulation was identified as a potential source of reinforcement in the majority of cases (52.7%) followed by access to social attention or preferred items (36.4%). Treatments utilized by parents were primarily behavioral strategies (56.3%) followed by basic first aid (54.5%). There were no differences in the topography, severity or potential source of reinforcement between those with the deletion (DEL) subtype and those with the uniparental disomy (UPD) subtype. Taken together, these data indicate that skin picking shown by individuals with PWS is a particularly severe and intractable behavioral issue that may be maintained by (as yet unknown) sensory consequences. Further studies to identify the determinants of skin picking in PWS are therefore needed. The implications for interventions are discussed. Copyright © 2013 Elsevier Ltd. All rights reserved.

An automatic microseismic or acoustic emission arrival identification scheme with deep recurrent neural networks

NASA Astrophysics Data System (ADS)

Zheng, Jing; Lu, Jiren; Peng, Suping; Jiang, Tianqi

2018-02-01

The conventional arrival pick-up algorithms cannot avoid the manual modification of the parameters for the simultaneous identification of multiple events under different signal-to-noise ratios (SNRs). Therefore, in order to automatically obtain the arrivals of multiple events with high precision under different SNRs, in this study an algorithm was proposed which had the ability to pick up the arrival of microseismic or acoustic emission events based on deep recurrent neural networks. The arrival identification was performed using two important steps, which included a training phase and a testing phase. The training process was mathematically modelled by deep recurrent neural networks using Long Short-Term Memory architecture. During the testing phase, the learned weights were utilized to identify the arrivals through the microseismic/acoustic emission data sets. The data sets were obtained by rock physics experiments of the acoustic emission. In order to obtain the data sets under different SNRs, this study added random noise to the raw experiments' data sets. The results showed that the outcome of the proposed method was able to attain an above 80 per cent hit-rate at SNR 0 dB, and an approximately 70 per cent hit-rate at SNR -5 dB, with an absolute error in 10 sampling points. These results indicated that the proposed method had high selection precision and robustness.

Optical elements design of optical pick-up with characteristics of read-out spot for high density optical storage

NASA Astrophysics Data System (ADS)

Li, Lihua; Ma, Jianshe; Liu, Lin; Pan, Longfa; Zhang, Jianyong; Lu, Junhui

2005-09-01

It is well known that the optical pick-up (OPU) plays a very important role in optical storage system. And the quality of OPU can be measured by the characteristics of OPU read-out spot for high density optical storage. Therefore this paper mainly designs an OPU model for high density optical storage to study the characteristics of OPU read-out spot. Firstly it analyses the optical read-out principle in OPU and contrives an optical read-out system based on the hereinbefore theory. In this step it chiefly designs the grating, splitter, collimator lens and objective lens. Secondly based on the aberrations analysis and theory involved by the splitter, the collimator lens and the optical lens, the paper uses the software CODE V to calculate the aberrations and to optimize the optical read-out system. Then the author can receive an ideal OPU read-out spot for high density optical storage and obtain the characteristics of the ideal OPU read-out spot. At the same time this paper analyses some influence factors which can directly affect the characteristics of the OPU read-out spot. Thirdly according to the up data the author practically manufactures a real optical pick-up to validate the hereinbefore designed optical read-out system. And it uses the Optical Spot Analyzer to get the image of the read-out spot. Comparing the ideal image to the actual image of the designed optical read-out system, the author finds out that the upwards analyses and design is suitable for high density storage and can be used in the actual production. And the author also receives the conclusion that the mostly influences on characteristics of OPU read-out spot for high density optical storage factors is not only the process of designing the grating, splitter, collimator lens and objective lens, but also the assembling work precision

Comparison of air-coupled GPR data analysis results determined by multiple analysts

NASA Astrophysics Data System (ADS)

Martino, Nicole; Maser, Ken

2016-04-01

Current bridge deck condition assessments using ground penetrating radar (GPR) requires a trained analyst to manually interpret substructure layering information from B-scan images in order to proceed with an intended analysis (pavement thickness, concrete cover, effects of rebar corrosion, etc.) For example, a recently developed method to rapidly and accurately analyze air-coupled GPR data based on the effects of rebar corrosion, requires that a user "picks" a layer of rebar reflections in each B-scan image collected along the length of the deck. These "picks" have information like signal amplitude and two way travel time. When a deck is new, or has little rebar corrosion, the resulting layer of rebar reflections is readily evident and there is little room for subjectivity. However, when a deck is severely deteriorated, the rebar layer may be difficult to identify, and different analysts may make different interpretations of the appropriate layer to analyze. One highly corroded bridge deck, was assessed with a number of nondestructive evaluation techniques including 2GHz air-coupled GPR. Two trained analysts separately selected the rebar layer in each B-scan image, choosing as much information as possible, even in areas of significant deterioration. The post processing of the selected data points was then completed and the results from each analyst were contour plotted to observe any discrepancies. The paper describes the differences between ground coupled and air-coupled GPR systems, the data collection and analysis methods used by two different analysts for one case study, and the results of the two different analyses.

Hand and Grasp Selection in a Preferential Reaching Task: The Effects of Object Location, Orientation, and Task Intention.

PubMed

Scharoun, Sara M; Scanlan, Kelly A; Bryden, Pamela J

2016-01-01

As numerous movement options are available in reaching and grasping, of particular interest are what factors influence an individual's choice of action. In the current study a preferential reaching task was used to assess the propensity for right handers to select their preferred hand and grasp a coffee mug by the handle in both independent and joint action object manipulation contexts. Mug location (right-space, midline, and left-space) and handle orientation (toward, away, to left, and to right of the participant) varied in four tasks that differed as a function of intention: (1) pick-up (unimanual, independent); (2) pick-up and pour (bimanual, independent); (3) pick-up and pass (unimanual, joint action); and (4) pick-up, pour and pass (bimanual, joint action). In line with previous reports, a right-hand preference for unimanual tasks was observed. Furthermore, extending existing literature to a preferential reaching task, role differentiation between the hands in bimanual tasks (i.e., preferred hand mobilizing, non-preferred hand stabilizing) was displayed. Finally, right-hand selection was greatest in right space, albeit lower in bimanual tasks compared to what is typically reported in unimanual tasks. Findings are attributed to the desire to maximize biomechanical efficiency in reaching. Grasp postures were also observed to reflect consideration of efficiency. More specifically, within independent object manipulation (pick-up; pick-up and pour) participants only grasped the mug by the handle when it afforded a comfortable posture. Furthermore, in joint action (pick-up and pass; pick-up, pour and pass), the confederate was only offered the handle if the intended action of the confederate was similar or required less effort than that of the participant. Together, findings from the current study add to our knowledge of hand and grasp selection in unimanual and bimanual object manipulation, within the context of both independent and joint action tasks.

Novel trends in pair distribution function approaches on bulk systems with nanoscale heterogeneities

DOE PAGES

Emil S. Bozin; Billinge, Simon J. L.

2016-07-29

Novel materials for high performance applications increasingly exhibit structural order on the nanometer length scale; a domain where crystallography, the basis of Rietveld refinement, fails [1]. In such instances the total scattering approach, which treats Bragg and diffuse scattering on an equal basis, is a powerful approach. In recent years, the analysis of the total scattering data became an invaluable tool and the gold standard for studying nanocrystalline, nanoporous, and disordered crystalline materials. The data may be analyzed in reciprocal space directly, or Fourier transformed to the real-space atomic pair distribution function (PDF) and this intuitive function examined for localmore » structural information. Here we give a number of illustrative examples, for convenience picked from our own work, of recent developments and applications of total scattering and PDF analysis to novel complex materials. There are many other wonderful examples from the work of others.« less

Orion Stage Adapter move to Redstone Airfield

NASA Image and Video Library

2018-04-03

NASA's Super Guppy aircraft arrives to the U.S. Army’s Redstone Airfield in Huntsville, Alabama, April 2, to pick up flight hardware for NASA’s Space Launch System – its new, deep-space rocket that will enable astronauts to begin their journey to explore destinations far into the solar system. The Guppy will depart on Tuesday, April 3 to deliver the Orion stage adapter to NASA’s Kennedy Space Center in Florida for flight preparations. On Exploration Mission-1, the first integrated flight of the SLS and the Orion spacecraft, the adapter will connect Orion to the rocket and carry 13 CubeSats as secondary payloads. Rumaasha Maasha, an aerospace engineer in Marshall's Spacecraft & Vehicle Systems Department, tours the cockpit of NASA's Super Guppy aircraft April 3 when it landed at Marshall to pick up the Orion stage adapter for transportation to NASA's Kennedy Space Center. Maasha holds a master's degree in aerospace engineering, is a certified aviation maintenance tech and pilot and previously worked as a 747 loadmaster and airline refueler.

Picking Parts Out of a Bin,

DTIC Science & Technology

1983-10-01

AD-A39257 PICKING PARS OUOF A BN(U)MASSACHUSETTS INS OF 1/ TECH CAMBRIDOE ARTIFCIAL INTELLGENCE LAB HIORNET AL OCT 830 AIM-465N00014-7C-0389 UNCLA$T...0505 S. PERFORMING ORGANIZATION NAME AND ADDRESS 10. PROGRAM ELEMENT. PROJECT. TASK Artificial Intelligence Laboratory AREA A WORK UNIT NUMBERS 545...types of objects. I Massachusetts Institute of Technology Artificial Intelligence Laboratory A.I. Memo No. 746 October, 1983 Picking Parts out of a Bin

Integration of task level planning and diagnosis for an intelligent robot

NASA Technical Reports Server (NTRS)

Gerstenfeld, Arthur

1988-01-01

The use of robots in the future must go beyond present applications and will depend on the ability of a robot to adapt to a changing environment and to deal with unexpected scenarios (i.e., picking up parts that are not exactly where they were expected to be). The objective of this research is to demonstrate the feasibility of incorporating high level planning into a robot enabling it to deal with anomalous situations in order to minimize the need for constant human instruction. The heuristics can be used by a robot to apply information about previous actions towards accomplishing future objectives more efficiently. The system uses a decision network that represents the plan for accomplishing a task. This enables the robot to modify its plan based on results of previous actions. The system serves as a method for minimizing the need for constant human instruction in telerobotics. This paper describes the integration of expert systems and simulation as a valuable tool that goes far beyond this project. Simulation can be expected to be used increasingly as both hardware and software improve. Similarly, the ability to merge an expert system with simulation means that we can add intelligence to the system. A malfunctioning space satellite is described. The expert system uses a series of heuristics in order to guide the robot to the proper location. This is part of task level planning. The final part of the paper suggests directions for future research. Having shown the feasibility of an expert system embedded in a simulation, the paper then discusses how the system can be integrated with the MSFC graphics system.

A new beam diagnostic system for the MASHA setup

NASA Astrophysics Data System (ADS)

Motycak, S.; Rodin, A. M.; Novoselov, A. S.; Podshibyakin, A. V.; Krupa, L.; Belozerov, A. V.; Vedeneyev, V. Yu.; Gulyaev, A. V.; Gulyaeva, A. V.; Kliman, J.; Salamatin, V. S.; Stepantsov, S. V.; Chernysheva, E. V.; Yuchimchuk, S. A.; Komarov, A. B.; Kamas, D.

2016-09-01

A new beam diagnostic system based on the PXI standard was developed, tested, and used in the MASHA setup experiment. The beam energy and beam current measurements were carried out using several methods. The online time-of-flight energy measurements were carried out using three pick-up detectors. We used two electronic systems to measure the time between the pick-ups. The first system was based on fast Agilent digitizers (2-channel, 4-GHz sampling rate), and the second one was based on a constant fraction discriminator (CFD) connected to a time-to-digital converter (TDC, 5-ps resolution). A new graphical interface to monitor the electronic devices and to perform the online calculations of energy was developed using MFC C++. The second system based on microchannel plate (time-of-flight) and silicon detectors for the determination of beam energy and the type of accelerated particles was also used. The beam current measurements were carried out with two different sensors. The first sensor is a rotating Faraday cup placed in front of the target, and the second one is an emission detector installed at the rear of the target. This system is now used in experiments for the synthesis of superheavy elements at the U400M cyclotron of the Flerov Laboratory of Nuclear Reactions (FLNR).

Design and implementation of a Bluetooth-based infant monitoring/saver (BIMS) system

NASA Astrophysics Data System (ADS)

Sonmez, Ahmet E.; Nalcaci, Murat T.; Pazarbasi, Mehmet A.; Toker, Onur; Fidanboylu, Kemal

2007-04-01

In this work, we discuss the design and implementation of a Bluetooth technology based infant monitoring system, which will enable the mother to monitor her baby's health condition remotely in real-time. The system will measure the heart rate, and temperature of the infant, and stream this data to the mother's Bluetooth based mobile unit, e.g. cell phone, PDA, etc. Existing infant monitors either require so many cables, or transmit only voice and/or video information, which is not enough for monitoring the health condition of an infant. With the proposed system, the mother will be warned against any abnormalities, which may be an indication of a disease, which in turn may result a sudden infant death. High temperature is a common symptom for several diseases, and heart rate is an essential sign of life, low or high heart rates are also essentials symptoms. Because of these reasons, the proposed system continously measures these two critical values. A 12 bits digital temperature sensor is used to measure infant's body temperature, and a piezo film sensor is used measure infant's heartbeat rate. These sensors, some simple analog circuitry, and a ToothPick unit are the main components of our embedded system. ToothPick unit is basically a Microchip 18LF6720 microcontroller, plus an RF circuitry with Bluetooth stack.

Genetic Characterization of Movement Disorders and Dementias

ClinicalTrials.gov

2018-05-10

Ataxia; Dystonia; Parkinson's Disease; Amyotrophic Lateral Sclerosis; Corticobasal Degeneration; Multiple System Atrophy; Alzheimer's Disease; Lewy Body Dementia; Parkinson Disease-Dementia; Dentatorubral-pallidoluysian Atrophy; Creutzfeldt-Jakob Disease and Fatal Familial Insomnia; Fragile X-associated Tremor/Ataxia Syndrome; Krabbe's Disease; Niemann-Pick Disease, Type C; Neuronal Ceroid Lipofuscinosis

CMOS active pixel sensor type imaging system on a chip

NASA Technical Reports Server (NTRS)

Fossum, Eric R. (Inventor); Nixon, Robert (Inventor)

2011-01-01

A single chip camera which includes an .[.intergrated.]. .Iadd.integrated .Iaddend.image acquisition portion and control portion and which has double sampling/noise reduction capabilities thereon. Part of the .[.intergrated.]. .Iadd.integrated .Iaddend.structure reduces the noise that is picked up during imaging.

Cratos: A Simple Low Power Excavation and Hauling System for Lunar Oxygen Production and General Excavation Tasks

NASA Technical Reports Server (NTRS)

Caruso, John J.; Greer, Lawrence C.; John, Wentworth T.; Spina, Dan C.; Krasowski, Mike J.; Abel, Phillip B.; Prokop, Norman F.; Flatico, Joseph M.; Sacksteder, Kurt R.

2007-01-01

The development of a robust excavating and hauling system for lunar and planetary excavation is critical to the NASA mission to the Moon and Mars. Cratos was developed as a low center of gravity, small (.75m x .75m x 0.3m), low power tracked test vehicle. The vehicle was modified to excavate and haul because it demonstrated good performance capabilities in a laboratory and field testing. Tested on loose sand in the SLOPE facility, the vehicle was able to pick up, carry, and dump sand, allowing it to accomplish the standard requirements delivery of material to a lunar oxygen production site. Cratos can pick up and deliver raw material to a production plant, as well as deliver spent tailings to a disposal site. The vehicle can complete many other In-Situ Resource Utilization (ISRU) excavation chores and in conjunction with another vehicle or with additional attachments may be able to accomplish all needed ISRU tasks.

Beneficial effects of anti-inflammatory therapy in a mouse model of Niemann-Pick disease type C1.

PubMed

Smith, David; Wallom, Kerri-Lee; Williams, Ian M; Jeyakumar, Mylvaganam; Platt, Frances M

2009-11-01

Niemann-Pick disease type C1 (NPC1) is a neurodegenerative lysosomal disorder characterized by sphingolipid and cholesterol storage in the late endocytic system. In common with other neurodegenerative diseases, activation of the innate immune system occurs in the brain resulting in neuro-inflammation. Targeting inflammation in the brain therefore represents a potential clinical intervention strategy that aims to slow the rate of disease progression and improve quality of life. We evaluated non-steroidal anti-inflammatory drugs (NSAIDs) and an anti-oxidant to determine whether these agents are disease modifying in an acute mouse model of NPC1. NSAIDs significantly prolonged the lifespan of NPC1 mice and slowed the onset of clinical signs. However, anti-oxidant therapy was of no significant benefit. Combining NSAID therapy with substrate reduction therapy (SRT) resulted in additive benefit. These data suggest that anti-inflammatory therapy may be a useful adjunctive treatment in the clinical management of NPC1, alone or combined with SRT.

An ultra-sensitive and wideband magnetometer based on a superconducting quantum interference device

NASA Astrophysics Data System (ADS)

Storm, Jan-Hendrik; Hömmen, Peter; Drung, Dietmar; Körber, Rainer

2017-02-01

The magnetic field noise in superconducting quantum interference devices (SQUIDs) used for biomagnetic research such as magnetoencephalography or ultra-low-field nuclear magnetic resonance is usually limited by instrumental dewar noise. We constructed a wideband, ultra-low noise system with a 45 mm diameter superconducting pick-up coil inductively coupled to a current sensor SQUID. Thermal noise in the liquid helium dewar is minimized by using aluminized polyester fabric as superinsulation and aluminum oxide strips as heat shields. With a magnetometer pick-up coil in the center of the Berlin magnetically shielded room 2 (BMSR2), a noise level of around 150 aT Hz-1/2 is achieved in the white noise regime between about 20 kHz and the system bandwidth of about 2.5 MHz. At lower frequencies, the resolution is limited by magnetic field noise arising from the walls of the shielded room. Modeling the BMSR2 as a closed cube with continuous μ-metal walls, we can quantitatively reproduce its measured field noise.

The Formal Elements Art Therapy Scale: A Measurement System for Global Variables in Art

ERIC Educational Resources Information Center

Gantt, Linda M.

2009-01-01

The Formal Elements Art Therapy Scale (FEATS) is a measurement system for applying numbers to global variables in two-dimensional art (drawing and painting). While it was originally developed for use with the single-picture assessment ("Draw a person picking an apple from a tree" [PPAT]), researchers can also apply many of the 14 scales of the…

ATLAS EventIndex general dataflow and monitoring infrastructure

NASA Astrophysics Data System (ADS)

Fernández Casaní, Á.; Barberis, D.; Favareto, A.; García Montoro, C.; González de la Hoz, S.; Hřivnáč, J.; Prokoshin, F.; Salt, J.; Sánchez, J.; Többicke, R.; Yuan, R.; ATLAS Collaboration

2017-10-01

The ATLAS EventIndex has been running in production since mid-2015, reliably collecting information worldwide about all produced events and storing them in a central Hadoop infrastructure at CERN. A subset of this information is copied to an Oracle relational database for fast dataset discovery, event-picking, crosschecks with other ATLAS systems and checks for event duplication. The system design and its optimization is serving event picking from requests of a few events up to scales of tens of thousand of events, and in addition, data consistency checks are performed for large production campaigns. Detecting duplicate events with a scope of physics collections has recently arisen as an important use case. This paper describes the general architecture of the project and the data flow and operation issues, which are addressed by recent developments to improve the throughput of the overall system. In this direction, the data collection system is reducing the usage of the messaging infrastructure to overcome the performance shortcomings detected during production peaks; an object storage approach is instead used to convey the event index information, and messages to signal their location and status. Recent changes in the Producer/Consumer architecture are also presented in detail, as well as the monitoring infrastructure.

Movement imagery classification in EMOTIV cap based system by Naïve Bayes.

PubMed

Stock, Vinicius N; Balbinot, Alexandre

2016-08-01

Brain-computer interfaces (BCI) provide means of communications and control, in assistive technology, which do not require motor activity from the user. The goal of this study is to promote classification of two types of imaginary movements, left and right hands, in an EMOTIV cap based system, using the Naïve Bayes classifier. A preliminary analysis with respect to results obtained by other experiments in this field is also conducted. Processing of the electroencephalography (EEG) signals is done applying Common Spatial Pattern filters. The EPOC electrodes cap is used for EEG acquisition, in two test subjects, for two distinct trial formats. The channels picked are FC5, FC6, P7 and P8 of the 10-20 system, and a discussion about the differences of using C3, C4, P3 and P4 positions is proposed. Dataset 3 of the BCI Competition II is also analyzed using the implemented algorithms. The maximum classification results for the proposed experiment and for the BCI Competition dataset were, respectively, 79% and 85% The conclusion of this study is that the picked positions for electrodes may be applied for BCI systems with satisfactory classification rates.

Embodied intersubjective engagement in mother–infant tactile communication: a cross-cultural study of Japanese and Scottish mother–infant behaviors during infant pick-up

PubMed Central

Negayama, Koichi; Delafield-Butt, Jonathan T.; Momose, Keiko; Ishijima, Konomi; Kawahara, Noriko; Lux, Erin J.; Murphy, Andrew; Kaliarntas, Konstantinos

2015-01-01

This study examines the early development of cultural differences in a simple, embodied, and intersubjective engagement between mothers putting down, picking up, and carrying their infants between Japan and Scotland. Eleven Japanese and ten Scottish mothers with their 6- and then 9-month-old infants participated. Video and motion analyses were employed to measure motor patterns of the mothers’ approach to their infants, as well as their infants’ collaborative responses during put-down, pick-up, and carry phases. Japanese and Scottish mothers approached their infants with different styles and their infants responded differently to the short duration of separation during the trial. A greeting-like behavior of the arms and hands was prevalent in the Scottish mothers’ approach, but not in the Japanese mothers’ approach. Japanese mothers typically kneeled before making the final reach to pick-up their children, giving a closer, apparently gentler final approach of the torso than Scottish mothers, who bent at the waist with larger movements of the torso. Measures of the gap closure between the mothers’ hands to their infants’ heads revealed variably longer duration and distance gap closures with greater velocity by the Scottish mothers than by the Japanese mothers. Further, the sequence of Japanese mothers’ body actions on approach, contact, pick-up, and hold was more coordinated at 6 months than at 9 months. Scottish mothers were generally more variable on approach. Measures of infant participation and expressivity indicate more active participation in the negotiation during the separation and pick-up phases by Scottish infants. Thus, this paper demonstrates a culturally different onset of development of joint attention in pick-up. These differences reflect cultures of everyday interaction. PMID:25774139

Primary adherence to antidepressant prescriptions in primary health care: a population-based study in Sweden.

PubMed

Freccero, Carl; Sundquist, Kristina; Sundquist, Jan; Ji, Jianguang

2016-01-01

Medical adherence is important in the treatment of depression. Primary medical adherence, i.e. patients collecting their newly prescribed medications from pharmacies, is very different depending on the drug prescribed To assess the rate of primary medical adherence in patients prescribed antidepressants and to identify characteristics that make patients less likely to pick up prescriptions. An observational study was performed using primary health care data from Sweden on patients who were prescribed antidepressants. Univariate and multivariate logistic regression was used to determine differences in pick-up rate according to patient characteristics. Pick-up rate, defined as collection of a prescription within 30 days. A total of 11 624 patients received an antidepressant prescription during the study period, and the overall pick-up rate was 85.1%. The pick-up rate differed according to country of birth: individuals born in the Middle East and other countries outside Europe had lower primary medical adherence than Swedes, with adjusted odds ratios (ORs) of 0.58 and 0.67, respectively. Patients at ages 64-79 years had a higher pick-up rate compared with those aged 25-44 years (OR 1.71). Divorced patients had a lower rate compared with married patients (OR 0.80). Immigrants from the Middle East and other countries outside Europe and younger and divorced patients had lower primary medical adherence, which calls for clinical attention and preventive measures. KEY POINTS Primary medical adherence is important in the treatment of depression. Are patient characteristics associated with primary medical adherence? The overall primary medical adherence rate was 85%. The rate differed by country of birth, age at diagnosis of depression, and marital status. Clinical attention is needed in patients who do not pick up their antidepressants.

Embodied intersubjective engagement in mother-infant tactile communication: a cross-cultural study of Japanese and Scottish mother-infant behaviors during infant pick-up.

PubMed

Negayama, Koichi; Delafield-Butt, Jonathan T; Momose, Keiko; Ishijima, Konomi; Kawahara, Noriko; Lux, Erin J; Murphy, Andrew; Kaliarntas, Konstantinos

2015-01-01

This study examines the early development of cultural differences in a simple, embodied, and intersubjective engagement between mothers putting down, picking up, and carrying their infants between Japan and Scotland. Eleven Japanese and ten Scottish mothers with their 6- and then 9-month-old infants participated. Video and motion analyses were employed to measure motor patterns of the mothers' approach to their infants, as well as their infants' collaborative responses during put-down, pick-up, and carry phases. Japanese and Scottish mothers approached their infants with different styles and their infants responded differently to the short duration of separation during the trial. A greeting-like behavior of the arms and hands was prevalent in the Scottish mothers' approach, but not in the Japanese mothers' approach. Japanese mothers typically kneeled before making the final reach to pick-up their children, giving a closer, apparently gentler final approach of the torso than Scottish mothers, who bent at the waist with larger movements of the torso. Measures of the gap closure between the mothers' hands to their infants' heads revealed variably longer duration and distance gap closures with greater velocity by the Scottish mothers than by the Japanese mothers. Further, the sequence of Japanese mothers' body actions on approach, contact, pick-up, and hold was more coordinated at 6 months than at 9 months. Scottish mothers were generally more variable on approach. Measures of infant participation and expressivity indicate more active participation in the negotiation during the separation and pick-up phases by Scottish infants. Thus, this paper demonstrates a culturally different onset of development of joint attention in pick-up. These differences reflect cultures of everyday interaction.

Accurate identification of microseismic P- and S-phase arrivals using the multi-step AIC algorithm

NASA Astrophysics Data System (ADS)

Zhu, Mengbo; Wang, Liguan; Liu, Xiaoming; Zhao, Jiaxuan; Peng, Ping'an

2018-03-01

Identification of P- and S-phase arrivals is the primary work in microseismic monitoring. In this study, a new multi-step AIC algorithm is proposed. This algorithm consists of P- and S-phase arrival pickers (P-picker and S-picker). The P-picker contains three steps: in step 1, a preliminary P-phase arrival window is determined by the waveform peak. Then a preliminary P-pick is identified using the AIC algorithm. Finally, the P-phase arrival window is narrowed based on the above P-pick. Thus the P-phase arrival can be identified accurately by using the AIC algorithm again. The S-picker contains five steps: in step 1, a narrow S-phase arrival window is determined based on the P-pick and the AIC curve of amplitude biquadratic time-series. In step 2, the S-picker automatically judges whether the S-phase arrival is clear to identify. In step 3 and 4, the AIC extreme points are extracted, and the relationship between the local minimum and the S-phase arrival is researched. In step 5, the S-phase arrival is picked based on the maximum probability criterion. To evaluate of the proposed algorithm, a P- and S-picks classification criterion is also established based on a source location numerical simulation. The field data tests show a considerable improvement of the multi-step AIC algorithm in comparison with the manual picks and the original AIC algorithm. Furthermore, the technique is independent of the kind of SNR. Even in the poor-quality signal group which the SNRs are below 5, the effective picking rates (the corresponding location error is <15 m) of P- and S-phase arrivals are still up to 80.9% and 76.4% respectively.

Primary adherence to antidepressant prescriptions in primary health care: a population-based study in Sweden

PubMed Central

Freccero, Carl; Sundquist, Kristina; Sundquist, Jan; Ji, Jianguang

2016-01-01

Background Medical adherence is important in the treatment of depression. Primary medical adherence, i.e. patients collecting their newly prescribed medications from pharmacies, is very different depending on the drug prescribed Objective To assess the rate of primary medical adherence in patients prescribed antidepressants and to identify characteristics that make patients less likely to pick up prescriptions. Methods An observational study was performed using primary health care data from Sweden on patients who were prescribed antidepressants. Univariate and multivariate logistic regression was used to determine differences in pick-up rate according to patient characteristics. Main outcome Pick-up rate, defined as collection of a prescription within 30 days. Results A total of 11 624 patients received an antidepressant prescription during the study period, and the overall pick-up rate was 85.1%. The pick-up rate differed according to country of birth: individuals born in the Middle East and other countries outside Europe had lower primary medical adherence than Swedes, with adjusted odds ratios (ORs) of 0.58 and 0.67, respectively. Patients at ages 64–79 years had a higher pick-up rate compared with those aged 25–44 years (OR 1.71). Divorced patients had a lower rate compared with married patients (OR 0.80). Conclusion Immigrants from the Middle East and other countries outside Europe and younger and divorced patients had lower primary medical adherence, which calls for clinical attention and preventive measures. Key pointsPrimary medical adherence is important in the treatment of depression.Are patient characteristics associated with primary medical adherence?The overall primary medical adherence rate was 85%.The rate differed by country of birth, age at diagnosis of depression, and marital status.Clinical attention is needed in patients who do not pick up their antidepressants. PMID:26828942

Evaluation of impression accuracy for a four-implant mandibular model--a digital approach.

PubMed

Stimmelmayr, Michael; Erdelt, Kurt; Güth, Jan-Frederik; Happe, Arndt; Beuer, Florian

2012-08-01

Implant-supported prosthodontics requires precise impressions to achieve a passive fit. Since the early 1990s, in vitro studies comparing different implant impression techniques were performed, capturing the data mostly mechanically. The purpose of this study was to evaluate the accuracy of three different impression techniques digitally. Dental implants were inserted bilaterally in ten polymer lower-arch models at the positions of the first molars and canines. From each original model, three different impressions (A, transfer; B, pick-up; and C, splinted pick-up) were taken. Scan-bodies were mounted on the implants of the polymer and on the lab analogues of the stone models and digitized. The scan-body in position 36 (FDI) of the digitized original and master casts were each superimposed, and the deviations of the remaining three scan-bodies were measured three-dimensionally. The systematic error of digitizing the models was 13 μm for the polymer and 5 μm for the stone model. The mean discrepancies of the original model to the stone casts were 124 μm (±34) μm for the transfer technique, 116 (±46) μm for the pick-up technique, and 80 (±25) μm for the splinted pick-up technique. There were statistically significant discrepancies between the evaluated impression techniques (p ≤ 0.025; ANOVA test). The splinted pick-up impression showed the least deviation between original and stone model; transfer and pick-up techniques showed similar results. For better accuracy of implant-supported prosthodontics, the splinted pick-up technique should be used for impressions of four implants evenly spread in edentulous jaws.

NMRNet: A deep learning approach to automated peak picking of protein NMR spectra.

PubMed

Klukowski, Piotr; Augoff, Michal; Zieba, Maciej; Drwal, Maciej; Gonczarek, Adam; Walczak, Michal J

2018-03-14

Automated selection of signals in protein NMR spectra, known as peak picking, has been studied for over 20 years, nevertheless existing peak picking methods are still largely deficient. Accurate and precise automated peak picking would accelerate the structure calculation, and analysis of dynamics and interactions of macromolecules. Recent advancement in handling big data, together with an outburst of machine learning techniques, offer an opportunity to tackle the peak picking problem substantially faster than manual picking and on par with human accuracy. In particular, deep learning has proven to systematically achieve human-level performance in various recognition tasks, and thus emerges as an ideal tool to address automated identification of NMR signals. We have applied a convolutional neural network for visual analysis of multidimensional NMR spectra. A comprehensive test on 31 manually-annotated spectra has demonstrated top-tier average precision (AP) of 0.9596, 0.9058 and 0.8271 for backbone, side-chain and NOESY spectra, respectively. Furthermore, a combination of extracted peak lists with automated assignment routine, FLYA, outperformed other methods, including the manual one, and led to correct resonance assignment at the levels of 90.40%, 89.90% and 90.20% for three benchmark proteins. The proposed model is a part of a Dumpling software (platform for protein NMR data analysis), and is available at https://dumpling.bio/. michaljerzywalczak@gmail.compiotr.klukowski@pwr.edu.pl. Supplementary data are available at Bioinformatics online.

An Amphipathic Helix Directs Cellular Membrane Curvature Sensing and Function of the BAR Domain Protein PICK1.

PubMed

Herlo, Rasmus; Lund, Viktor K; Lycas, Matthew D; Jansen, Anna M; Khelashvili, George; Andersen, Rita C; Bhatia, Vikram; Pedersen, Thomas S; Albornoz, Pedro B C; Johner, Niklaus; Ammendrup-Johnsen, Ina; Christensen, Nikolaj R; Erlendsson, Simon; Stoklund, Mikkel; Larsen, Jannik B; Weinstein, Harel; Kjærulff, Ole; Stamou, Dimitrios; Gether, Ulrik; Madsen, Kenneth L

2018-05-15

BAR domains are dimeric protein modules that sense, induce, and stabilize lipid membrane curvature. Here, we show that membrane curvature sensing (MCS) directs cellular localization and function of the BAR domain protein PICK1. In PICK1, and the homologous proteins ICA69 and arfaptin2, we identify an amphipathic helix N-terminal to the BAR domain that mediates MCS. Mutational disruption of the helix in PICK1 impaired MCS without affecting membrane binding per se. In insulin-producing INS-1E cells, super-resolution microscopy revealed that disruption of the helix selectively compromised PICK1 density on insulin granules of high curvature during their maturation. This was accompanied by reduced hormone storage in the INS-1E cells. In Drosophila, disruption of the helix compromised growth regulation. By demonstrating size-dependent binding on insulin granules, our finding highlights the function of MCS for BAR domain proteins in a biological context distinct from their function, e.g., at the plasma membrane during endocytosis. Copyright © 2018 The Author(s). Published by Elsevier Inc. All rights reserved.

Ergonomic Evaluation of Battery Powered Portable Cotton Picker

NASA Astrophysics Data System (ADS)

Dixit, A.; Manes, G. S.; Singh, A.; Prakash, A.; Mahal, J. S.

2012-09-01

Ergonomic evaluation of battery powered portable manual cotton picker was carried out on two subjects for three cotton varieties and was compared against manual method of picking. It is a hand operated machine and has a pair of chain with small sharp edged teeth and sprockets and is operated by a light weight 12 V battery. Cotton gets entangled with the chain and is collected and guided into the collection bag. Average heart rate, oxygen consumption, workload, energy expenditure was more in case of cotton picking by manual cotton picker as compared to manual picking for both the subjects for all three cotton variety types. Oxygen consumption varied from 0.81 to 0.97 l/min, workload varied from 36.32 to 46.16 W and energy expenditure varied from 16.83 to 20.33 kJ/min for both the subject in case of machine picking for all three cotton varieties. The maximum discomfort experienced by the subjects during picking cotton by manual cotton picker was in right wrist palm, right forearm, upper and lower back, left shoulder and in lower legs and both feet.

Big Dam Era: A Legislative and Institutional History of the Pick-Sloan Missouri Basin Program

DTIC Science & Technology

1993-01-01

other problems in the upper tributary basins." Bureau of the Budget Director Harold D. Smith preferred an alterna- tive approach. (Note: By...executive order in 1970, the Bureau of the Budget became the Office of Management and Budget.) In February 1944, Smith responded to a letter from Secretary...President Roosevelt. Smith said he had informed Roosevelt of the Corps proposal and it was not what the President wanted, "at least at the present." The

History of the Army Ground Forces. Study Number 17. History of the Third Army

DTIC Science & Technology

1985-01-01

impotence; Facist Italy rattled swords, and Germany was giving itself to Nazism. On 9 August 1932, without fanfare and almost without public awareness, the...picking up pecans under ofte tree. 5. All units should continue to remove the physically unfit as rapidly as possible. While this conference was going...with War Department orders, he visited the Fifth Army front in Italy , as an observer, in November, 1943. In his report to General McNair,322 General

Effects of olive maturation and stoning on quality indices and antioxidant content of extra virgin oils (cv. Coratina) during storage.

PubMed

Gambacorta, G; Faccia, M; Previtali, M A; Pati, S; La Notte, E; Baiano, A

2010-04-01

Quality indices, antioxidant compounds, and antioxidant activities of extra-virgin oils from Coratina olives were evaluated during a 12-mo storage. Whole and stoned olives, picked at 2 different maturation index (MI), were submitted to malaxation for 45 min and extracted by a 3-phase continuous system. A 90-min malaxation trial was also performed for the stoned olives. The following parameters were monitored: free acidity, peroxide value, K(232) and K(270) indices, sensory profile, total phenolic content (TPC), phenolic profiles, tocopherol compounds, and antioxidant activity (AA). The highest TPC, AA, and sensory score were found for the oils obtained by olives picked at low MI and by stoned olives. After 12 mo, all the oils were still included into the "extra-virgin" category, and those deriving from whole olives picked at the lowest MI showed the best sensory characteristics due to high fruity and well-balanced pungent and bitter tastes. This study could represent a helpful tool for oil-makers to improve the marketing of extra-virgin olive oils produced from cultivars with very high phenolic contents, such as Coratina, generally not adequately appreciated by consumers because of their excessive bitterness and pungent taste. These oils, when extracted from whole olives, are generally consumed after a certain period of time (at least 6 mo) during which a decrease in the phenolic content occurs. The results of the present work demonstrate that oils extracted from olives picked at low maturation index can be marketed immediately after production if subjected to stoning and malaxed for a short time. This procedure allows to adjust the phenolic content and to obtain a high flavor and a well-balanced taste.

Automatic processing of induced events in the geothermal reservoirs Landau and Insheim, Germany

NASA Astrophysics Data System (ADS)

Olbert, Kai; Küperkoch, Ludger; Meier, Thomas

2016-04-01

Induced events can be a risk to local infrastructure that need to be understood and evaluated. They represent also a chance to learn more about the reservoir behavior and characteristics. Prior to the analysis, the waveform data must be processed consistently and accurately to avoid erroneous interpretations. In the framework of the MAGS2 project an automatic off-line event detection and a phase onset time determination algorithm are applied to induced seismic events in geothermal systems in Landau and Insheim, Germany. The off-line detection algorithm works based on a cross-correlation of continuous data taken from the local seismic network with master events. It distinguishes events between different reservoirs and within the individual reservoirs. Furthermore, it provides a location and magnitude estimation. Data from 2007 to 2014 are processed and compared with other detections using the SeisComp3 cross correlation detector and a STA/LTA detector. The detected events are analyzed concerning spatial or temporal clustering. Furthermore the number of events are compared to the existing detection lists. The automatic phase picking algorithm combines an AR-AIC approach with a cost function to find precise P1- and S1-phase onset times which can be used for localization and tomography studies. 800 induced events are processed, determining 5000 P1- and 6000 S1-picks. The phase onset times show a high precision with mean residuals to manual phase picks of 0s (P1) to 0.04s (S1) and standard deviations below ±0.05s. The received automatic picks are applied to relocate a selected number of events to evaluate influences on the location precision.

Pickup Ions in the Plasma Environments of Mars, Comets, and Enceladus

NASA Astrophysics Data System (ADS)

Cravens, T.; Rahmati, A.; Sakai, S.; Madanian, H.; Larson, D. E.; Lillis, R. J.; Halekas, J. S.; Goldstein, R.; Burch, J. L.; Clark, G. B.; Jakosky, B. M.

2015-12-01

Ions created within a flowing plasma by ionization of neutrals respond to the electric and magnetic fields associated with the flow becoming what are called pick-up ions (PUI). PUI play an important role in many solar system plasma environments and affect the energy and momentum balance of the plasma flow. PUI have been observed during several recent space missions and PUI data will be compared and interpreted using models. Pick-up oxygen ions were observed in the solar wind upstream of Mars by the Solar Energetic Particle (SEP) and Solar Wind Ion Analyzer (SWIA) instruments on NASA's MAVEN (Mars Atmosphere and Volatile EvolutioN) spacecraft. The pick-up oxygen ions are created when atoms in the hot corona are ionized by solar radiation and charge exchange with solar wind protons. The ion fluxes measured by SEP can constrain the oxygen escape rate from Mars. PUI were also been detected at distances of 10 - 100 km from the nucleus of comet 67P/Churyumov- Gerasimenko (67P/CG) by plasma instruments (IES and ICA) onboard the Rosetta Orbiter when the comet was at 3 AU. The newly-born cometary ions are accelerated by the solar wind motional electric field but remain un-magnetized, as suggested by pre-encounter models (Rubin et al., 2014). The inner magnetosphere of Saturn and the water plume of the icy satellite Enceladus provide a third example of PUI. H2O+ ions created by ionization of neutral water producing ions that are picked-up by the co-rotating magnetospheric plasma flow. These ions then undergo a complex interaction with the plume gas including collisions that convert most H2O+ ions to H3O+, as measured by the Ion and Neutral Mass Spectrometer (INMS) onboard the Cassini spacecraft.

The antagonistic modulation of Arp2/3 activity by N-WASP, WAVE2 and PICK1 defines dynamic changes in astrocyte morphology.

PubMed

Murk, Kai; Blanco Suarez, Elena M; Cockbill, Louisa M R; Banks, Paul; Hanley, Jonathan G

2013-09-01

Astrocytes exhibit a complex, branched morphology, allowing them to functionally interact with numerous blood vessels, neighboring glial processes and neuronal elements, including synapses. They also respond to central nervous system (CNS) injury by a process known as astrogliosis, which involves morphological changes, including cell body hypertrophy and thickening of major processes. Following severe injury, astrocytes exhibit drastically reduced morphological complexity and collectively form a glial scar. The mechanistic details behind these morphological changes are unknown. Here, we investigate the regulation of the actin-nucleating Arp2/3 complex in controlling dynamic changes in astrocyte morphology. In contrast to other cell types, Arp2/3 inhibition drives the rapid expansion of astrocyte cell bodies and major processes. This intervention results in a reduced morphological complexity of astrocytes in both dissociated culture and in brain slices. We show that this expansion requires functional myosin II downstream of ROCK and RhoA. Knockdown of the Arp2/3 subunit Arp3 or the Arp2/3 activator N-WASP by siRNA also results in cell body expansion and reduced morphological complexity, whereas depleting WAVE2 specifically reduces the branching complexity of astrocyte processes. By contrast, knockdown of the Arp2/3 inhibitor PICK1 increases astrocyte branching complexity. Furthermore, astrocyte expansion induced by ischemic conditions is delayed by PICK1 knockdown or N-WASP overexpression. Our findings identify a new morphological outcome for Arp2/3 activation in restricting rather than promoting outwards movement of the plasma membrane in astrocytes. The Arp2/3 regulators PICK1, and N-WASP and WAVE2 function antagonistically to control the complexity of astrocyte branched morphology, and this mechanism underlies the morphological changes seen in astrocytes during their response to pathological insult.

Accurate simulations of helium pick-up experiments using a rejection-free Monte Carlo method

NASA Astrophysics Data System (ADS)

Dutra, Matthew; Hinde, Robert

2018-04-01

In this paper, we present Monte Carlo simulations of helium droplet pick-up experiments with the intention of developing a robust and accurate theoretical approach for interpreting experimental helium droplet calorimetry data. Our approach is capable of capturing the evaporative behavior of helium droplets following dopant acquisition, allowing for a more realistic description of the pick-up process. Furthermore, we circumvent the traditional assumption of bulk helium behavior by utilizing density functional calculations of the size-dependent helium droplet chemical potential. The results of this new Monte Carlo technique are compared to commonly used Poisson pick-up statistics for simulations that reflect a broad range of experimental parameters. We conclude by offering an assessment of both of these theoretical approaches in the context of our observed results.

Tracheal intubation in the ice-pick position with video laryngoscopes: a randomised controlled trial in a manikin.

PubMed

Wetsch, Wolfgang A; Hellmich, Martin; Spelten, Oliver; Schier, Robert; Böttiger, Bernd W; Hinkelbein, Jochen

2013-09-01

Tracheal intubation in nonstandardised positions is associated with a higher risk of tube misplacement and may have deleterious consequences for patients. Video laryngoscopes for tracheal intubation facilitate both glottic view and success rates. However, their use in the ice-pick position has not been evaluated. To evaluate the role of video laryngoscopes for tracheal intubation in the ice-pick position. A randomised, controlled manikin trial. A standardised airway manikin was placed in the corner of a room. Tracheal intubation was only possible from the lower right side of the manikin. In randomised order, participants used a standard Macintosh laryngoscope and GlideScope Ranger, Storz C-MAC, Pentax AWS, Airtraq and McGrath Series5 video laryngoscopes. Statistical analysis was performed using the Wilcoxon signed-rank and McNemar's tests; A P value of less than 0.05 was deemed statistically significant. Twenty anaesthesiologists, all emergency medicine board-certified. Time to first ventilation (primary); time to glottic view and confirmation of tube position (secondary). Successful ventilation was achieved most rapidly with the Macintosh laryngoscope (36.1 ± 13.4 s; reference method), followed by the Airtraq (38.4 ± 36.3 s; P = n.s.), Pentax AWS (51.6 ± 43.3 s; P = n.s.) and Storz C-Mac (62.7 ± 49.7 s; P = n.s.). The use of the GlideScope Ranger (79.8 ± 61.9 s, P = 0.01) and McGrath series5 (79.8 ± 58.5 s, P = 0.023) resulted in significantly longer times. When comparing overall intubation success, the rate of successful tracheal intubation was higher with the Airtraq than with the McGrath Series5 (P = 0.031; all others n.s.). The use of video laryngoscopes did not result in higher success rates or faster tracheal intubation in the ice-pick position when compared with conventional laryngoscopy in this manikin study. www.clinicaltrials.gov, NCT01210105.

Effects of Grip-Force, Contact, and Acceleration Feedback on a Teleoperated Pick-and-Place Task.

PubMed

Khurshid, Rebecca P; Fitter, Naomi T; Fedalei, Elizabeth A; Kuchenbecker, Katherine J

2017-01-01

The multifaceted human sense of touch is fundamental to direct manipulation, but technical challenges prevent most teleoperation systems from providing even a single modality of haptic feedback, such as force feedback. This paper postulates that ungrounded grip-force, fingertip-contact-and-pressure, and high-frequency acceleration haptic feedback will improve human performance of a teleoperated pick-and-place task. Thirty subjects used a teleoperation system consisting of a haptic device worn on the subject's right hand, a remote PR2 humanoid robot, and a Vicon motion capture system to move an object to a target location. Each subject completed the pick-and-place task 10 times under each of the eight haptic conditions obtained by turning on and off grip-force feedback, contact feedback, and acceleration feedback. To understand how object stiffness affects the utility of the feedback, half of the subjects completed the task with a flexible plastic cup, and the others used a rigid plastic block. The results indicate that the addition of grip-force feedback with gain switching enables subjects to hold both the flexible and rigid objects more stably, and it also allowed subjects who manipulated the rigid block to hold the object more delicately and to better control the motion of the remote robot's hand. Contact feedback improved the ability of subjects who manipulated the flexible cup to move the robot's arm in space, but it deteriorated this ability for subjects who manipulated the rigid block. Contact feedback also caused subjects to hold the flexible cup less stably, but the rigid block more securely. Finally, adding acceleration feedback slightly improved the subject's performance when setting the object down, as originally hypothesized; interestingly, it also allowed subjects to feel vibrations produced by the robot's motion, causing them to be more careful when completing the task. This study supports the utility of grip-force and high-frequency acceleration feedback in teleoperation systems and motivates further improvements to fingertip-contact-and-pressure feedback.

The Long-Term U.S. Strategic Implications of Huawei’s Penetration in Latin America

DTIC Science & Technology

2013-03-01

TIM Brasil Picks NSN, Ericsson and Huawei to Deliver LTE 2012, para. 1). This shows a commitment to a long-term relationship between Huawei and...statement of Eliot L. Engel, congressional representative from New York). 1-37. "TIM Brasil Picks NSN, Ericsson and Huawei to Deliver LTE...34 TeleGeography. October 31, 2012. Accessed January 21, 2013. http://www.telegeography.com/products/commsupdate/arti cles/2012/10/31/tim- brasil -picks-nsn

Combination brain and systemic injections of AAV provide maximal functional and survival benefits in the Niemann-Pick mouse.

PubMed

Passini, Marco A; Bu, Jie; Fidler, Jonathan A; Ziegler, Robin J; Foley, Joseph W; Dodge, James C; Yang, Wendy W; Clarke, Jennifer; Taksir, Tatyana V; Griffiths, Denise A; Zhao, Michael A; O'Riordan, Catherine R; Schuchman, Edward H; Shihabuddin, Lamya S; Cheng, Seng H

2007-05-29

Niemann-Pick disease (NPD) is caused by the loss of acid sphingomyelinase (ASM) activity, which results in widespread accumulation of undegraded lipids in cells of the viscera and CNS. In this study, we tested the effect of combination brain and systemic injections of recombinant adeno-associated viral vectors encoding human ASM (hASM) in a mouse model of NPD. Animals treated by combination therapy exhibited high levels of hASM in the viscera and brain, which resulted in near-complete correction of storage throughout the body. This global reversal of pathology translated to normal weight gain and superior recovery of motor and cognitive functions compared to animals treated by either brain or systemic injection alone. Furthermore, animals in the combination group did not generate antibodies to hASM, demonstrating the first application of systemic-mediated tolerization to improve the efficacy of brain injections. All of the animals treated by combination therapy survived in good health to an investigator-selected 54 weeks, whereas the median lifespans of the systemic-alone, brain-alone, or untreated ASM knockout groups were 47, 48, and 34 weeks, respectively. These data demonstrate that combination therapy is a promising therapeutic modality for treating NPD and suggest a potential strategy for treating disease indications that cause both visceral and CNS pathologies.

Assessment of Self-Efficacy in Systems Engineering as an Indicator of Competency Level Achievement

DTIC Science & Technology

2014-06-01

11  C.  RESEARCH ON SELF-EFFICACY IN INFORMATION TECHNOLOGY —A PARALLEL TO SYSTEMS ENGINEERING ......13  1.  Stakeholder Analysis...Expectancy value theory FA Factor analysis IT Information technology KSA Knowledge, skills, abilities MIS Management information systems NPS...item in particular reflected statistically significant pre- and post-survey results at p<.001, which was the student’s ability to pick a technology for

Pick-and-place process for sensitivity improvement of the capacitive type CMOS MEMS 2-axis tilt sensor

NASA Astrophysics Data System (ADS)

Chang, Chun-I.; Tsai, Ming-Han; Liu, Yu-Chia; Sun, Chih-Ming; Fang, Weileun

2013-09-01

This study exploits the foundry available complimentary metal-oxide-semiconductor (CMOS) process and the packaging house available pick-and-place technology to implement a capacitive type micromachined 2-axis tilt sensor. The suspended micro mechanical structures such as the spring, stage and sensing electrodes are fabricated using the CMOS microelectromechanical systems (MEMS) processes. A bulk block is assembled onto the suspended stage by pick-and-place technology to increase the proof-mass of the tilt sensor. The low temperature UV-glue dispensing and curing processes are employed to bond the block onto the stage. Thus, the sensitivity of the CMOS MEMS capacitive type 2-axis tilt sensor is significantly improved. In application, this study successfully demonstrates the bonding of a bulk solder ball of 100 µm in diameter with a 2-axis tilt sensor fabricated using the standard TSMC 0.35 µm 2P4M CMOS process. Measurements show the sensitivities of the 2-axis tilt sensor are increased for 2.06-fold (x-axis) and 1.78-fold (y-axis) after adding the solder ball. Note that the sensitivity can be further improved by reducing the parasitic capacitance and the mismatch of sensing electrodes caused by the solder ball.

[Coordination patterns assessed by a continuous measure of joints coupling during upper limb repetitive movements].

PubMed

Draicchio, F; Silvetti, A; Ranavolo, A; Iavicoli, S

2008-01-01

We analyzed the coordination patterns between elbow, shoulder and trunk in a motor task consisting of reaching out, picking up a cylinder, and transporting it back by using the Dynamical Systems Theory and calculating the continuous relative phase (CRP), a continuous measure of the coupling between two interacting joints. We used an optoelectronic motion analysis system consisting of eight infra-red ray cameras to detect the movements of nine skin-mounted markers. We calculated the root square of the adjusted coefficient of determination, the coefficient of multiple correlation (CMC), in order to investigate the repeatability of the joints coordination. The data confirm that the CNS establishes both synergic (i.e. coupling between shoulder and trunk on the frontal plane) and hierarchical (i.e. coupling between elbow-shoulder-trunk on the horizontal plane) relationships among the available degrees of freedom to overcome the complexity due to motor redundancy. The present study describes a method to investigate the organization of the kinematic degrees of freedom during upper limb multi-joint motor tasks that can be useful to assess upper limb repetitive movements.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wendelberger, Laura Jean

In large datasets, it is time consuming or even impossible to pick out interesting images. Our proposed solution is to find statistics to quantify the information in each image and use those to identify and pick out images of interest.

Estimating dermal transfer from PCB-contaminated porous surfaces.

PubMed

Slayton, T M; Valberg, P A; Wait, A D

1998-06-01

Health risks posed by dermal contact with PCB-contaminated porous surfaces have not been directly demonstrated and are difficult to estimate indirectly. Surface contamination by organic compounds is commonly assessed by collecting wipe samples with hexane as the solvent. However, for porous surfaces, hexane wipe characterization is of limited direct use when estimating potential human exposure. Particularly for porous surfaces, the relationship between the amount of organic material collected by hexane and the amount actually picked up by, for example, a person's hand touch is unknown. To better mimic PCB pickup by casual hand contact with contaminated concrete surfaces, we used alternate solvents and wipe application methods that more closely mimic casual dermal contact. Our sampling results were compared to PCB pickup using hexane-wetted wipes and the standard rubbing protocol. Dry and oil-wetted samples, applied without rubbing, picked up less than 1% of the PCBs picked up by the standard hexane procedure; with rubbing, they picked up about 2%. Without rubbing, saline-wetted wipes picked up 2.5%; with rubbing, they picked up about 12%. While the nature of dermal contact with a contaminated surface cannot be perfectly reproduced with a wipe sample, our results with alternate wiping solvents and rubbing methods more closely mimic hand contact than the standard hexane wipe protocol. The relative pickup estimates presented in this paper can be used in conjunction with site-specific PCB hexane wipe results to estimate dermal pickup rates at sites with PCB-contaminated concrete.

Fast and flexible 3D object recognition solutions for machine vision applications

NASA Astrophysics Data System (ADS)

Effenberger, Ira; Kühnle, Jens; Verl, Alexander

2013-03-01

In automation and handling engineering, supplying work pieces between different stages along the production process chain is of special interest. Often the parts are stored unordered in bins or lattice boxes and hence have to be separated and ordered for feeding purposes. An alternative to complex and spacious mechanical systems such as bowl feeders or conveyor belts, which are typically adapted to the parts' geometry, is using a robot to grip the work pieces out of a bin or from a belt. Such applications are in need of reliable and precise computer-aided object detection and localization systems. For a restricted range of parts, there exists a variety of 2D image processing algorithms that solve the recognition problem. However, these methods are often not well suited for the localization of randomly stored parts. In this paper we present a fast and flexible 3D object recognizer that localizes objects by identifying primitive features within the objects. Since technical work pieces typically consist to a substantial degree of geometric primitives such as planes, cylinders and cones, such features usually carry enough information in order to determine the position of the entire object. Our algorithms use 3D best-fitting combined with an intelligent data pre-processing step. The capability and performance of this approach is shown by applying the algorithms to real data sets of different industrial test parts in a prototypical bin picking demonstration system.

The design and construction of a module to demonstrate a method for transmission of data from a medical implant

NASA Astrophysics Data System (ADS)

Morgan, I.; Benjamin, J. D.

1985-08-01

Methods of powering devices to which only ac contact can be made and receiving data transmitted back from them are described. Such devices include medical implants which communicate with the external environment via ultrasound or rf links. Two breadboard systems were built to demonstrate the techniques. In both the device is powered by picking up an ac input and rectifying it. A signal voltage detected by the device is encoded as a frequency, transmitted and decoded. In one case this is performed on a separate channel from that used to power the device. In the other only one channel is used for both signals, and data is transmitted by modulating the impedance presented by the device. The resulting modulation of the input signal is picked up by the external circuit and decoded.

How to select a continuous emission monitoring system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Radigan, M.J.

1994-02-01

Selecting a continuous emission monitoring system (CEMS) involves more than picking an analyzer. Successful CEMS interface sampling and data-management systems to produce accurate, reliable reports required by regulatory agencies. Following objective guidelines removes some of the misery from CEMS shopping. However, prospective CEMS buyers should do their homework and develop well-thought-out, detailed specification for the processes' sampling criteria. Fine tuning the analyzer/data management system can eliminate maintenance costs and keep the facility operating within its permit restrictions.

Planning and leading of the technological processes by mechanical working with microsoft project

NASA Astrophysics Data System (ADS)

Nae, I.; Grigore, N.

2016-08-01

Nowadays, fabrication systems and methods are being modified; new processing technologies come up, flow sheets develop a minimum number of phases, the flexibility of the technologies grows up, new methods and instruments of monitoring and leading the processing operations also come up. The technological course (route, entry, scheme, guiding) referring to the series of the operation, putting and execution phases of a mark in order to obtain the final product from the blank is represented by a sequence of activities realized by a logic manner, on a well determined schedule, with a determined budget and resources. Also, a project can be defined as a series of specific activities, methodical structured which they aim to finish a specific objective, within a fixed schedule and budget. Within the homogeneity between the project and the technological course, this research is presenting the defining of the technological course of mechanical chip removing process using Microsoft Project. Under these circumstances, this research highlights the advantages of this method: the celerity using of other technological alternatives in order to pick the optimal process, the job scheduling being constrained by any kinds, the standardization of some processing technological operations.

DeepPicker: A deep learning approach for fully automated particle picking in cryo-EM.

PubMed

Wang, Feng; Gong, Huichao; Liu, Gaochao; Li, Meijing; Yan, Chuangye; Xia, Tian; Li, Xueming; Zeng, Jianyang

2016-09-01

Particle picking is a time-consuming step in single-particle analysis and often requires significant interventions from users, which has become a bottleneck for future automated electron cryo-microscopy (cryo-EM). Here we report a deep learning framework, called DeepPicker, to address this problem and fill the current gaps toward a fully automated cryo-EM pipeline. DeepPicker employs a novel cross-molecule training strategy to capture common features of particles from previously-analyzed micrographs, and thus does not require any human intervention during particle picking. Tests on the recently-published cryo-EM data of three complexes have demonstrated that our deep learning based scheme can successfully accomplish the human-level particle picking process and identify a sufficient number of particles that are comparable to those picked manually by human experts. These results indicate that DeepPicker can provide a practically useful tool to significantly reduce the time and manual effort spent in single-particle analysis and thus greatly facilitate high-resolution cryo-EM structure determination. DeepPicker is released as an open-source program, which can be downloaded from https://github.com/nejyeah/DeepPicker-python. Copyright © 2016 Elsevier Inc. All rights reserved.

Co-Requirement of PICK1 Binding and PKC Phosphorylation for Stable Surface Expression of the Metabotropic Glutamate Receptor mGluR7

PubMed Central

Suh, Young Ho; Pelkey, Kenneth A.; Lavezzari, Gabriela; Roche, Paul A.; Huganir, Richard L.; McBain, Chris J.; Roche, Katherine W.

2008-01-01

SUMMARY The presynaptic metabotropic glutamate receptor (mGluR) mGluR7 modulates excitatory neurotransmission by regulating neurotransmitter release, and plays a critical role in certain forms of synaptic plasticity. Although the dynamic regulation of mGluR7 surface expression governs a novel form of metaplasticity in the hippocampus, little is known about the molecular mechanisms regulating mGluR7 trafficking. We now show that mGluR7 surface expression is stabilized by both PKC phosphorylation and by receptor binding to the PDZ domain-containing protein PICK1. Phosphorylation of mGluR7 on serine 862 (S862) inhibits CaM binding thereby increasing mGluR7 surface expression and receptor binding to PICK1. Furthermore, in mice lacking PICK1, PKC-dependent increases in mGluR7 phosphorylation and surface expression are diminished, and mGluR7-dependent plasticity at mossy fiber-interneuron hippocampal synapses is impaired. These data support a model in which PICK1 binding and PKC phosphorylation act together to stabilize mGluR7 on the cell surface in vivo. PMID:18549785

Optical Device for Converting a Laser Beam into Two Co-aligned but Oppositely Directed Beams

NASA Technical Reports Server (NTRS)

Jennings, Donald

2013-01-01

Optical systems consisting of a series of optical elements require alignment from the input end to the output end. The optical elements can be mirrors, lenses, sources, detectors, or other devices. Complex optical systems are often difficult to align from end-to-end because the alignment beam must be inserted at one end in order for the beam to traverse the entire optical path to the other end. The ends of the optical train may not be easily accessible to the alignment beam. Typically, when a series of optical elements is to be aligned, an alignment laser beam is inserted into the optical path with a pick-off mirror at one end of the series of elements. But it may be impossible to insert the beam at an end-point. It can be difficult to locate the pick-off mirror at the desired position because there is not enough space, there is no mounting surface, or the location is occupied by a source, detector, or other component. Alternatively, the laser beam might be inserted at an intermediate location (not at an end-point) and sent, first in one direction and then the other, to the opposite ends of the optical system for alignment. However, in this case, alignment must be performed in two directions and extra effort is required to co-align the two beams to make them parallel and coincident, i.e., to follow the same path as an end-to-end beam. An optical device has been developed that accepts a laser beam as input and produces two co-aligned, but counter-propagating beams. In contrast to a conventional alignment laser placed at one end of the optical path, this invention can be placed at a convenient position within the optical train and aligned to send its two beams simultaneously along precisely opposite paths that, taken together, trace out exactly the same path as the conventional alignment laser. This invention allows the user the freedom to choose locations within the optical train for placement of the alignment beam. It is also self-aligned by design and requires almost no adjustment.

Pick Your Pick Me Up

Cancer.gov

Mood changes are common after you quit. You might be irritable, restless, or feel down or blue. If you’re experiencing these feelings after quitting smoking, there are many things you can do to help lift your mood.

Use of a Quality Improvement Initiative to Achieve Consistent Reporting of Level of Suspicion for Tumor on Multiparametric Prostate MRI.

PubMed

Rosenkrantz, Andrew B; Pujara, Akshat C; Taneja, Samir S

2016-05-01

The purpose of this article is to evaluate the utility of a quality improvement (QI) initiative in achieving long-term adherence to an evolving structured format for reporting the level of suspicion for tumor on prostate MRI examinations. The original QI initiative occurred over a 4-month period in 2010, before which prostate MRI was reported using free text. The initiative consisted of development of a section-wide macro, an initial group training session, ordering physician input regarding the structured report's value, subsequent weekly sessions for ongoing review, and timely individualized feedback in instances of nonuse. The initial structured report included pick lists for describing the level of suspicion for tumor as negative, low, medium, or high. Pick lists were modified in 2011 to incorporate a 5-point Likert scale and again in 2015 to incorporate Prostate Imaging Data and Reporting System (PI-RADS) version 2. These refinements were implemented after accelerated training periods. The frequency of reports providing an MRI-based suspicion level during these periods was assessed. Fifty-five percent of reports provided an MRI-based level of suspicion for tumor before the initiative. For various cohorts evaluated after the initiative (using structured reports based on the low, medium, or high scheme; a numeric Likert scale; or PI-RADS), this frequency improved to 95-100% (p < 0.001). Among reports without a suspicion level, potential confounding factors included marked artifact from hip prosthesis and overt diffuse tumor. The QI initiative achieved excellent adherence in reporting a suspicion level for tumor on prostate MRI examinations. The described components of the initiative were useful for maintaining long-term adherence that persisted after serial modifications to the report lexicon.

Accurate seismic phase identification and arrival time picking of glacial icequakes

NASA Astrophysics Data System (ADS)

Jones, G. A.; Doyle, S. H.; Dow, C.; Kulessa, B.; Hubbard, A.

2010-12-01

A catastrophic lake drainage event was monitored continuously using an array of 6, 4.5 Hz 3 component geophones in the Russell Glacier catchment, Western Greenland. Many thousands of events and arrival time phases (e.g., P- or S-wave) were recorded, often with events occurring simultaneously but at different locations. In addition, different styles of seismic events were identified from 'classical' tectonic earthquakes to tremors usually observed in volcanic regions. The presence of such a diverse and large dataset provides insight into the complex system of lake drainage. One of the most fundamental steps in seismology is the accurate identification of a seismic event and its associated arrival times. However, the collection of such a large and complex dataset makes the manual identification of a seismic event and picking of the arrival time phases time consuming with variable results. To overcome the issues of consistency and manpower, a number of different methods have been developed including short-term and long-term averages, spectrograms, wavelets, polarisation analyses, higher order statistics and auto-regressive techniques. Here we propose an automated procedure which establishes the phase type and accurately determines the arrival times. The procedure combines a number of different automated methods to achieve this, and is applied to the recently acquired lake drainage data. Accurate identification of events and their arrival time phases are the first steps in gaining a greater understanding of the extent of the deformation and the mechanism of such drainage events. A good knowledge of the propagation pathway of lake drainage meltwater through a glacier will have significant consequences for interpretation of glacial and ice sheet dynamics.

InGaAs/InP SPAD photon-counting module with auto-calibrated gate-width generation and remote control

NASA Astrophysics Data System (ADS)

Tosi, Alberto; Ruggeri, Alessandro; Bahgat Shehata, Andrea; Della Frera, Adriano; Scarcella, Carmelo; Tisa, Simone; Giudice, Andrea

2013-01-01

We present a photon-counting module based on InGaAs/InP SPAD (Single-Photon Avalanche Diode) for detecting single photons up to 1.7 μm. The module exploits a novel architecture for generating and calibrating the gate width, along with other functions (such as module supervision, counting and processing of detected photons, etc.). The gate width, i.e. the time interval when the SPAD is ON, is user-programmable in the range from 500 ps to 1.5 μs, by means of two different delay generation methods implemented with an FPGA (Field-Programmable Gate Array). In order to compensate chip-to-chip delay variation, an auto-calibration circuit picks out a combination of delays in order to match at best the selected gate width. The InGaAs/InP module accepts asynchronous and aperiodic signals and introduces very low timing jitter. Moreover the photon counting module provides other new features like a microprocessor for system supervision, a touch-screen for local user interface, and an Ethernet link for smart remote control. Thanks to the fullyprogrammable and configurable architecture, the overall instrument provides high system flexibility and can easily match all requirements set by many different applications requiring single photon-level sensitivity in the near infrared with very low photon timing jitter.

Reducing Coal Dust With Water Jets

NASA Technical Reports Server (NTRS)

Gangal, M. D.; Lewis, E. V.

1985-01-01

Jets also cool and clean cutting equipment. Modular pick-and-bucket miner suffers from disadvantage: Creates large quantities of potentially explosive coal dust. Dust clogs drive chain and other parts and must be removed by hand. Picks and bucket lips become overheated by friction and be resharpened or replaced frequently. Addition of oscillating and rotating water jets to pick-and-bucket machine keeps down dust, cools cutting edges, and flushes machine. Rotating jets wash dust away from drive chain. Oscillating jets cool cutting surfaces. Both types of jet wet airborne coal dust; it precipitates.

Higher order mode couplers for normal conducting DORIS 5-cell cavities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dewersteg, B.; Seesselberg, E.; Zolfaghari, A.

1985-10-01

The beam intensity of the DORIS e -e storage ring is limited to about 100 mA average circulation current as a result of instabilities driven by higher order rf cavity modes. Thus an investigation has been made of the higher order mode impedances of the DORIS rf accelerator cavities. These cavities are the same as the normally conducting inductively coupled 500 MHz 5-cell structures used in PETRA. The results of the investigation were applied for the construction of inductive and capacitive attenuation antennae corresponding to specific mode spectra and mode impedances. The antennae must fit into the existing 35 mmmore » pick up flanges of the cavities and in spite of these size and position limitations they must be efficient in reducing the shunt impedances of the dangerous modes.« less

Boundary element analysis of the directional sensitivity of the concentric EMG electrode.

PubMed

Henneberg, K A; Plonsey, R

1993-07-01

Assessment of the motor unit architecture based on concentric electrode motor unit potentials requires a thorough understanding of the recording characteristics of the concentric EMG electrode. Previous simulation studies have attempted to include the effect of EMG electrodes on the recorded waveforms by uniformly averaging the tissue potential at the coordinates of one- or two-dimensional electrode models. By employing the boundary element method, this paper improves earlier models of the concentric EMG electrode by including an accurate geometric representation of the electrode, as well as the mutual electrical influence between the electrode surfaces. A three-dimensional sensitivity function is defined from which information about the preferential direction of sensitivity, blind spots, phase changes, rate of attenuation, and range of pick-up radius can be derived. The study focuses on the intrinsic features linked to the geometry of the electrode. The results show that the cannula perturbs the potential distribution significantly. The core and the cannula electrodes measure potentials of the same order of magnitude in all of the pick-up range, except adjacent to the central wire, where the latter dominates the sensitivity function. The preferential directions of sensitivity are determined by the amount of geometric offset between the individual sensitivity functions of the core and the cannula. The sensitivity function also reveals a complicated pattern of phase changes in the pick-up range. Potentials from fibers located behind the tip or along the cannula are recorded with reversed polarity compared to those located in front of the tip. Rotation of the electrode about its axis was found to alter the duration, the peak-to-peak amplitude, and the rise time of waveforms recorded from a moving dipole.

78 FR 54871 - Procurement List; Proposed Additions and Deletion

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-06

...: GENERAL SERVICES ADMINISTRATION, NEW YORK, NY Holiday Themed Bags, Containers and Baking Cup-Picks Set NSN... 16 oz., 6PK NSN: MR 380--Set, Baking Cups and Picks, Holiday, 24PC NPA: Winston-Salem Industries for...

Evaluation of family intervention through unobtrusive audio recordings: experiences in "bugging" children.

PubMed

Johnson, S M; Christensen, A; Bellamy, G T

1976-01-01

Five children referred to a child-family intervention program wore a radio transmitter in the home during pre-intervention and termination assessments. The transmitter broadcast to a receiver-recording apparatus in the home (either activated by an interval timer at predetermined "random" times or by parents at predetermined "picked" times). "Picked" times were parent-selected situations during which problems typically occurred (e.g., bedtime). Parents activated the recorder regularly whether or not problems occurred. Child-deviant, parent-negative, and parent-commanding behaviors were significantly higher at the picked times during pretest than at random times. At posttest, behaviors in all three classes were substantially reduced at picked times, but not at random times. For individual subject data, reductions occurred in at least two of the three dependent variables for three of the five cases during random time assessments. In general, the behavioral outcome data corresponded to parent-attitude reports and parent-collected observation data.

Detection of singly ionized energetic lunar pick-up ions upstream of earth's bow shock

NASA Technical Reports Server (NTRS)

Hilchenbach, M.; Hovestadt, D.; Klecker, B.; Moebius, E.

1992-01-01

Singly ionized suprathermal ions upstream of the earth's bow shock have been detected by using the time-of-flight spectrometer SULEICA on the AMPTE/IRM satellite. The data were collected between August and December 1985. The flux of the ions in the mass range between 23 and 37 amu is highly anisotropic towards the earth. The ions are observed with a period of about 29 days around new moon (+/- 3 days). The correlation of the energy of the ions with the solar wind speed and the interplanetary magnetic field orientation indicates the relation to the pick-up process. We conclude that the source of these pick-up ions is the moon. We argue that due to the impinging solar wind, atoms are sputtered off the lunar surface, ionized in the sputtering process or by ensuing photoionization and picked up by the solar wind.

Bayesian Peak Picking for NMR Spectra

PubMed Central

Cheng, Yichen; Gao, Xin; Liang, Faming

2013-01-01

Protein structure determination is a very important topic in structural genomics, which helps people to understand varieties of biological functions such as protein-protein interactions, protein–DNA interactions and so on. Nowadays, nuclear magnetic resonance (NMR) has often been used to determine the three-dimensional structures of protein in vivo. This study aims to automate the peak picking step, the most important and tricky step in NMR structure determination. We propose to model the NMR spectrum by a mixture of bivariate Gaussian densities and use the stochastic approximation Monte Carlo algorithm as the computational tool to solve the problem. Under the Bayesian framework, the peak picking problem is casted as a variable selection problem. The proposed method can automatically distinguish true peaks from false ones without preprocessing the data. To the best of our knowledge, this is the first effort in the literature that tackles the peak picking problem for NMR spectrum data using Bayesian method. PMID:24184964

Arrival-time picking method based on approximate negentropy for microseismic data

NASA Astrophysics Data System (ADS)

Li, Yue; Ni, Zhuo; Tian, Yanan

2018-05-01

Accurate and dependable picking of the first arrival time for microseismic data is an important part in microseismic monitoring, which directly affects analysis results of post-processing. This paper presents a new method based on approximate negentropy (AN) theory for microseismic arrival time picking in condition of much lower signal-to-noise ratio (SNR). According to the differences in information characteristics between microseismic data and random noise, an appropriate approximation of negentropy function is selected to minimize the effect of SNR. At the same time, a weighted function of the differences between maximum and minimum value of AN spectrum curve is designed to obtain a proper threshold function. In this way, the region of signal and noise is distinguished to pick the first arrival time accurately. To demonstrate the effectiveness of AN method, we make many experiments on a series of synthetic data with different SNR from -1 dB to -12 dB and compare it with previously published Akaike information criterion (AIC) and short/long time average ratio (STA/LTA) methods. Experimental results indicate that these three methods can achieve well picking effect when SNR is from -1 dB to -8 dB. However, when SNR is as low as -8 dB to -12 dB, the proposed AN method yields more accurate and stable picking result than AIC and STA/LTA methods. Furthermore, the application results of real three-component microseismic data also show that the new method is superior to the other two methods in accuracy and stability.

The L266V tau mutation is associated with frontotemporal dementia and Pick-like 3R and 4R tauopathy.

PubMed

Hogg, Marion; Grujic, Zoran M; Baker, Matt; Demirci, Serpil; Guillozet, Angela L; Sweet, Alison P; Herzog, Laura L; Weintraub, Sandra; Mesulam, M-Marsel; LaPointe, Nichole E; Gamblin, T C; Berry, Robert W; Binder, Lester I; de Silva, Rohan; Lees, Andrew; Espinoza, Marisol; Davies, Peter; Grover, Andrew; Sahara, Naruhiko; Ishizawa, Takashi; Dickson, Dennis; Yen, Shu-Hui; Hutton, Michael; Bigio, Eileen H

2003-10-01

We report a case of rapidly progressive frontotemporal dementia presenting at age 33 years. At autopsy there was severe atrophy of the frontal and temporal lobes. Tau-positive Pick bodies, which ultrastructurally were composed of straight filaments, were present, accompanied by severe neuronal loss and gliosis. RD3, a tau antibody specific for the three-repeat (3R) isoforms, labeled the Pick bodies. ET3, a four-repeat (4R) isoform-specific tau antibody, did not label Pick bodies, but highlighted rare astrocytes, and threads in white matter bundles in the corpus striatum. Analysis of the tau gene revealed an L266V mutation in exon 9. Analysis of brain tissue from this case revealed elevated levels of exon 10+ tau RNA and soluble 4R tau. However, both 3R and 4R isoforms were present in sarkosyl-insoluble tau fractions with a predominance of the shortest 3R isoform. The L266V mutation is associated with decreased rate and extent of tau-induced microtubule assembly, and a 3R isoform-specific increase in tau self assembly as measured by an in vitro assay. Combined, these data indicate that L266V is a pathogenic tau mutation that is associated with Pick-like pathology. In addition, the results of the RD3 and ET3 immunostains clearly explain for the first time the presence of both 3R and 4R tau isoforms in preparations of insoluble tau from some Pick's disease cases.

A Bayesian pick-the-winner design in a randomized phase II clinical trial.

PubMed

Chen, Dung-Tsa; Huang, Po-Yu; Lin, Hui-Yi; Chiappori, Alberto A; Gabrilovich, Dmitry I; Haura, Eric B; Antonia, Scott J; Gray, Jhanelle E

2017-10-24

Many phase II clinical trials evaluate unique experimental drugs/combinations through multi-arm design to expedite the screening process (early termination of ineffective drugs) and to identify the most effective drug (pick the winner) to warrant a phase III trial. Various statistical approaches have been developed for the pick-the-winner design but have been criticized for lack of objective comparison among the drug agents. We developed a Bayesian pick-the-winner design by integrating a Bayesian posterior probability with Simon two-stage design in a randomized two-arm clinical trial. The Bayesian posterior probability, as the rule to pick the winner, is defined as probability of the response rate in one arm higher than in the other arm. The posterior probability aims to determine the winner when both arms pass the second stage of the Simon two-stage design. When both arms are competitive (i.e., both passing the second stage), the Bayesian posterior probability performs better to correctly identify the winner compared with the Fisher exact test in the simulation study. In comparison to a standard two-arm randomized design, the Bayesian pick-the-winner design has a higher power to determine a clear winner. In application to two studies, the approach is able to perform statistical comparison of two treatment arms and provides a winner probability (Bayesian posterior probability) to statistically justify the winning arm. We developed an integrated design that utilizes Bayesian posterior probability, Simon two-stage design, and randomization into a unique setting. It gives objective comparisons between the arms to determine the winner.

Enhancing micro-seismic P-phase arrival picking: EMD-cosine function-based denoising with an application to the AIC picker

NASA Astrophysics Data System (ADS)

Shang, Xueyi; Li, Xibing; Morales-Esteban, A.; Dong, Longjun

2018-03-01

Micro-seismic P-phase arrival picking is an elementary step into seismic event location, source mechanism analysis, and seismic tomography. However, a micro-seismic signal is often mixed with high frequency noises and power frequency noises (50 Hz), which could considerably reduce P-phase picking accuracy. To solve this problem, an Empirical Mode Decomposition (EMD)-cosine function denoising-based Akaike Information Criterion (AIC) picker (ECD-AIC picker) is proposed for picking the P-phase arrival time. Unlike traditional low pass filters which are ineffective when seismic data and noise bandwidths overlap, the EMD adaptively separates the seismic data and the noise into different Intrinsic Mode Functions (IMFs). Furthermore, the EMD-cosine function-based denoising retains the P-phase arrival amplitude and phase spectrum more reliably than any traditional low pass filter. The ECD-AIC picker was tested on 1938 sets of micro-seismic waveforms randomly selected from the Institute of Mine Seismology (IMS) database of the Chinese Yongshaba mine. The results have shown that the EMD-cosine function denoising can effectively estimate high frequency and power frequency noises and can be easily adapted to perform on signals with different shapes and forms. Qualitative and quantitative comparisons show that the combined ECD-AIC picker provides better picking results than both the ED-AIC picker and the AIC picker, and the comparisons also show more reliable source localization results when the ECD-AIC picker is applied, thus showing the potential of this combined P-phase picking technique.

78 FR 46301 - Airworthiness Directives; BAE Systems (Operations) Limited Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-31

... of a cracked pick- up bracket of the forward outboard pylon of the number 1 engine due to stress... 3 attachment bolt holes. Subsequent investigation revealed that the cause of cracking was stress... bracket of the forward outboard pylon of the number 1 engine due to stress corrosion. We are issuing this...

78 FR 65204 - Airworthiness Directives; BAE Systems (Operations) Limited Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-31

... the number 1 engine due to stress corrosion. This AD requires repetitive inspections and, depending on.... Subsequent investigation revealed that the cause of cracking was stress corrosion. Cracking of the pylon pick... bracket of the forward outboard pylon of the number 1 engine due to stress corrosion. We are issuing this...

An automatic lightning detection and photographic system

NASA Technical Reports Server (NTRS)

Wojtasinski, R. J.; Holley, L. D.; Gray, J. L.; Hoover, R. B.

1973-01-01

Conventional 35-mm camera is activated by an electronic signal every time lightning strikes in general vicinity. Electronic circuit detects lightning by means of antenna which picks up atmospheric radio disturbances. Camera is equipped with fish-eye lense, automatic shutter advance, and small 24-hour clock to indicate time when exposures are made.

A Framework for Open Textbooks Analytics System

ERIC Educational Resources Information Center

Prasad, Deepak; Totaram, Rajneel; Usagawa, Tsuyoshi

2016-01-01

In the last few years, open textbook development has picked up dramatically due both to the expense of commercially published textbooks and the increasing availability of high-quality OER alternatives. While this offers a tremendous benefit in terms of lowering student textbook costs, the question remains, to what extent (if any) do open textbooks…

Ballistic Missile Propellant Evaluation Test Motor System (Super BATES)

DTIC Science & Technology

1974-11-25

and laminated parts are debulked and 75 cured in a hydroclave at 950 psi (minimum) and 3000 F, and machined to final dimensions. All molded parts are...to pick dlf- ferent lengths of motors simply hy relocating and pinning the cross arms. flatbed truck with forklift will be i adequate for moving

Tracking cotton fiber quality and foreign matter through a stripper harvester

USDA-ARS?s Scientific Manuscript database

The main objective of this project was to track cotton fiber quality and foreign matter content throughout the harvesting units and conveying/cleaning systems on a brush-roll stripper harvester. Seed cotton samples were collected at six locations in 2011 and five in 2012 including: 1) hand-picked fr...

49 CFR 232.213 - Extended haul trains.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., DEPARTMENT OF TRANSPORTATION BRAKE SYSTEM SAFETY STANDARDS FOR FREIGHT AND OTHER NON-PASSENGER TRAINS AND... extended haul trains will originate and a description of the trains that will be operated as extended haul.... (5) The train shall have no more than one pick-up and one set-out en route, except for the set-out of...

A consistent and uniform research earthquake catalog for the AlpArray region: preliminary results.

NASA Astrophysics Data System (ADS)

Molinari, I.; Bagagli, M.; Kissling, E. H.; Diehl, T.; Clinton, J. F.; Giardini, D.; Wiemer, S.

2017-12-01

The AlpArray initiative (www.alparray.ethz.ch) is a large-scale European collaboration ( 50 institutes involved) to study the entire Alpine orogen at high resolution with a variety of geoscientific methods. AlpArray provides unprecedentedly uniform station coverage for the region with more than 650 broadband seismic stations, 300 of which are temporary. The AlpArray Seismic Network (AASN) is a joint effort of 25 institutes from 10 nations, operates since January 2016 and is expected to continue until the end of 2018. In this study, we establish a uniform earthquake catalogue for the Greater Alpine region during the operation period of the AASN with a aimed completeness of M2.5. The catalog has two main goals: 1) calculation of consistent and precise hypocenter locations 2) provide preliminary but uniform magnitude calculations across the region. The procedure is based on automatic high-quality P- and S-wave pickers, providing consistent phase arrival times in combination with a picking quality assessment. First, we detect all events in the region in 2016/2017 using an STA/LTA based detector. Among the detected events, we select 50 geographically homogeneously distributed events with magnitudes ≥2.5 representative for the entire catalog. We manually pick the selected events to establish a consistent P- and S-phase reference data set, including arrival-time time uncertainties. The reference data, are used to adjust the automatic pickers and to assess their performance. In a first iteration, a simple P-picker algorithm is applied to the entire dataset, providing initial picks for the advanced MannekenPix (MPX) algorithm. In a second iteration, the MPX picker provides consistent and reliable automatic first arrival P picks together with a pick-quality estimate. The derived automatic P picks are then used as initial values for a multi-component S-phase picking algorithm. Subsequently, automatic picks of all well-locatable earthquakes will be considered to calculate final minimum 1D P and S velocity models for the region with appropriate stations corrections. Finally, all the events are relocated with the NonLinLoc algorithm in combination with the updated 1D models. The proposed procedure represents the first step towards uniform earthquake catalog for the entire greater Alpine region using the AASN.

Excavation on the Moon: Regolith Collection for Oxygen Production and Outpost Site Preparation

NASA Technical Reports Server (NTRS)

Caruso, John J.; Spina, Dan C.; Greer, Lawrence C.; John, Wentworth T.; Michele, Clem; Krasowski, Mike J.; Prokop, Norman F.

2008-01-01

The development of a robust regolith moving system for lunar and planetary processing and construction is critical to the NASA mission to the Moon and Mars. Oxygen production may require up to 200 metric tons of regolith collection per year; outpost site development may require several times this amount. This paper describes progress in the small vehicle implement development and small excavation system development. Cratos was developed as a platform for the ISRU project to evaluate the performance characteristics of a low center of gravity, small (0.75m x 0.75m x 0.3m), low-power, tracked vehicle performing excavation, load, haul, and dump operations required for lunar ISRU. It was tested on loose sand in a facility capable of producing level and inclined surfaces, and demonstrated the capability to pick up, carry, and dump sand, allowing it to accomplish the delivery of material to a site. Cratos has demonstrated the capability to pick up and deliver simulant to a bury an inflatable habitat, to supply an oxygen production plant, and to build a ramp.

The directional dependence of cometary magnetic energy density in the quasi-parallel and quasi-perpendicular regimes

NASA Technical Reports Server (NTRS)

Miller, R. H.; Gombosi, T. I.; Gary, S. P.; Winske, D.

1991-01-01

The direction of propagation of low frequency magnetic fluctuations generated by cometary ion pick-up is examined by means of 1D electromagnetic hybrid simulations. The newborn ions are injected at a constant rate, and the helicity and direction of propagation of magnetic fluctuations are explored for cometary ion injection angles of 0 and 90 deg relative to the solar wind magnetic field. The parameter eta represents the relative contribution of wave energy propagating in the direction away from the comet, parallel to the beam. For small (quasi-parallel) injection angles eta was found to be of order unity, while for larger (quasi-perpendicular) angles eta was found to be of order 0.5.

Automatic picker of P & S first arrivals and robust event locator

NASA Astrophysics Data System (ADS)

Pinsky, V.; Polozov, A.; Hofstetter, A.

2003-12-01

We report on further development of automatic all distances location procedure designed for a regional network. The procedure generalizes the previous "loca l" (R < 500 km) and "regional" (500 < R < 2000 km) routines and comprises: a) preliminary data processing (filtering and de-spiking), b) phase identificatio n, c) P, S first arrival picking, d) preliminary location and e) robust grid-search optimization procedure. Innovations concern phase identification, automa tic picking and teleseismic location. A platform free flexible Java interface was recently created, allowing easy parameter tuning and on/off switching to t he full-scale manual picking mode. Identification of the regional P and S phase is provided by choosing between the two largest peaks in the envelope curve. For automatic on-time estimation we utilize now ratio of two STAs, calculated in two consecutive and equal time windows (instead of previously used Akike Information Criterion). "Teleseismic " location is split in two stages: preliminary and final one. The preliminary part estimates azimuth and apparent velocity by fitting a plane wave to the P automatic pickings. The apparent velocity criterion is used to decide about strategy of the following computations: teleseismic or regional. The preliminary estimates of azimuth and apparent velocity provide starting value for the final teleseismic and regional location. Apparent velocity is used to get first a pproximation distance to the source on the basis of the P, Pn, Pg travel-timetables. The distance estimate together with the preliminary azimuth estimate provides first approximations of the source latitude and longitude via sine and cosine theorems formulated for the spherical triangle. Final location is based on robust grid-search optimization procedure, weighting the number of pickings that simultaneously fit the model travel times. The grid covers initial location and becomes finer while approaching true hypocenter. The target function is a sum of the bell-shaped characteristic functions, used to emphasize true pickings and eliminate outliers. The final solution is a grid point that provides maximum to the target function. The procedure was applied to a list of ML > 4 earthquakes recorded by the Israel Seismic Network (ISN) in the 1999-2002 time period. Most of them are badly constrained relative the network. However, the results of location with average normalized error relative bulletin solutions e=dr/R of 5% were obtained, in each of the distance ranges. The first version of the procedure was incorporated in the national Early Warning System in 2001. Recently, we started to send automatic Early Warn ing reports, to the EMSC Real Time Bulletin. Initially reported some teleseismic location discrepancies have been eliminated by introduction of station corrections.

New Worlds Observer Telescope and Instrument Optical Design Concepts

NASA Technical Reports Server (NTRS)

Howard, Joseph; Kilston, Steve; Kendrick, Steve

2008-01-01

Optical design concepts for the telescope and instrumentation for NASA's New Worlds Observer program are presented. First order parameters are derived from the science requirements, and estimated performance metrics are shown using optical models. A four meter multiple channel telescope is discussed, as well as a suite of science instrument concepts. Wide field instrumentation (imager and spectrograph) would be accommodated by a three-mirror anastigmat telescope design. Planet finding and characterization would use a separate channel which is picked off after the first two mirrors (primary and secondary). Guiding concepts are also discussed.

Noise from Two-Blade Propellers

NASA Technical Reports Server (NTRS)

Stowell, E Z; Deming, A F

1936-01-01

The two-blade propeller, one of the most powerful sources of sound known, has been studied with the view of obtaining fundamental information concerning the noise emission. In order to eliminate engine noise, the propeller was mounted on an electric motor. A microphone was used to pick up the sound whose characteristics were studied electrically. The distribution of noise throughout the frequency range, as well as the spatial distribution about the propeller, was studied. The results are given in the form of polar diagrams. An appendix of common acoustical terms is included.

Sodium Pick-Up Ion Observations in the Solar Wind Upstream of Mercury

NASA Astrophysics Data System (ADS)

Jasinski, J. M.; Raines, J. M.; Slavin, J. A.; Regoli, L. R.; Murphy, N.

2018-05-01

We present the first observations of sodium pick-up ions upstream of Mercury’s magnetosphere. From these observations we infer properties of Mercury’s sodium exosphere and implications for the solar wind interaction with Mercury’s magnetosphere.

Pick-N-Pull Auto Dismantlers, Kansas City, LLC Inc.

EPA Pesticide Factsheets

The EPA is providing notice of a proposed Administrative Penalty Assessment against Pick-N-Pull Auto Dismantlers, Kansas City, LLC, a subsidiary of Schnitzer Steel Industries, Inc., for alleged violations at its facilities at 8012 East Truman Rd., Kansas C

Secondary sea-blue histiocytosis derived from Niemann-Pick disease.

PubMed

Suzuki, Osamu; Abe, Masafumi

2007-04-01

Sea-blue histiocytosis is a rare disorder seen in patients with lipid metabolic or ceroid storage diseases. Sea-blue histiocytes are ceroid-laden macrophages detectable by May-Giemsa staining. We report a case of a 28-year-old woman diagnosed with Niemann-Pick disease at 2 or 3 years of age. To confirm this diagnosis, we examined her bone marrow, which revealed scattered foci containing aggregates of foamy macrophages. May-Giemsa staining identified blue-staining foamy macrophages, referred to as sea-blue histiocytes. In summary, we report the detection of sea-blue histiocytosis in an adult with Niemann-Pick disease.

[Clinical and genetic special features of Niemann-Pick disease, type C].

PubMed

Zakharova, E Iu; Mikhaĭlova, S V; Proshliakova, T Iu; Rudenskaia, G E

2012-01-01

Niemann-Pick disease, type C is a rare hereditary disorder of the group of lisosomal storage diseases, caused by mutations in the genes NPC1 or NPC2. Depending on the onset age, several clinical forms of this disease, which differs by manifestation age, main clinical signs and clinical course, are distinguished. Niemann-Pick disease type C can imitate other hereditary and acquired diseases, which complicates its early diagnostics. Clinical and genetic diversity of this disorder, considered on the clinical cases diagnosed at the FSI "RCMG" of RAMS, are discussed in this review.

[Pit-picking surgery for pilonidal disease].

PubMed

Iesalnieks, I; Deimel, S; Kienle, K; Schlitt, H J; Zülke, C

2011-10-01

The pit-picking method was first described by J. Bascom in 1980, however, this minimally invasive technique is used only by a minority of surgeons yet. Surgery was performed under local anesthesia. All primary pits in the midline were removed by excising a border of skin of <1 mm and a 1 cm long incision was made parallel to one side of the cleft to open the chronic abscess cavity. No specific postoperative wound care was given. Pit-picking surgery was carried out 157 times in a total of 153 patients (126 males) between June 2007 and November 2010. Follow-up information was available in 123 cases and 21 patients (17%) developed disease recurrence after a mean follow-up time of 7.1 months. By multivariate analysis, a body mass index (BMI) >25 kg/m(2) (p=0.019) and duration of the disease of ≥6 months (p=0.017) were statistically significantly associated with disease recurrence after pit-picking surgery. The recurrence occurred more often in male than in female patients (20% versus 4.5%, p=0.12) Patients with pilonidal disease can be successfully treated by the pit-picking procedure in more than 80% of selected cases. Female patients and non-overweight male patients with short-term disease benefit most from this treatment method.

Improved method for peak picking in matrix-assisted laser desorption/ionization time-of-flight mass spectrometry.

PubMed

Kempka, Martin; Sjödahl, Johan; Björk, Anders; Roeraade, Johan

2004-01-01

A method for peak picking for matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) is described. The method is based on the assumption that two sets of ions are formed during the ionization stage, which have Gaussian distributions but different velocity profiles. This gives rise to a certain degree of peak skewness. Our algorithm deconvolutes the peak and utilizes the fast velocity, bulk ion distribution for peak picking. Evaluation of the performance of the new method was conducted using peptide peaks from a bovine serum albumin (BSA) digest, and compared with the commercial peak-picking algorithms Centroid and SNAP. When using the new two-Gaussian algorithm, for strong signals the mass accuracy was equal to or marginally better than the results obtained from the commercial algorithms. However, for weak, distorted peaks, considerable improvement in both mass accuracy and precision was obtained. This improvement should be particularly useful in proteomics, where a lack of signal strength is often encountered when dealing with weakly expressed proteins. Finally, since the new peak-picking method uses information from the entire signal, no adjustments of parameters related to peak height have to be made, which simplifies its practical use. Copyright 2004 John Wiley & Sons, Ltd.

Pectin methylesterase activity in vivo differs from activity in vitro and enhances polygalacturonase-mediated pectin degradation in tabasco pepper.

PubMed

Arancibia, Ramón A; Motsenbocker, Carl E

2006-03-01

Polygalacturonase (PG) and pectin methylesterase (PME) activities were analyzed in ripening fruits of two tabasco pepper (Capsicum frutescens) lines that differ in the extent of pectin degradation (depolymerization and dissolution). Ripe 'Easy Pick' fruit is characterized by pectin ultra-degradation and easy fruit detachment from the calyx (deciduous trait), while pectin depolymerization and dissolution in ripe 'Hard Pick' fruit is limited. PG activity in protein extracts increased similarly in both lines during fruit ripening. PME activity in vivo assessed by methanol production, however, was detected only in fruit of the 'Easy Pick' line and was associated with decreased pectin methyl-esterification. In contrast, methanol production in vivo was not detected in fruits of the 'Hard Pick' line and the degree of pectin esterification remained the same throughout ripening. Consequently, a ripening specific PME that is active in vivo appears to enhance PG-mediated pectin ultra-degradation resulting in cell wall dissolution and the deciduous fruit trait. PME activity in vitro, however, was detected in protein extracts from both lines at all ripening stages. This indicates that some PME isozymes are apparently inactive in vivo, particularly in green fruit and throughout ripening in the 'Hard Pick' line, limiting PG-mediated pectin depolymerization which results in moderately difficult fruit separation from the calyx.

Fast first arrival picking algorithm for noisy microseismic data

NASA Astrophysics Data System (ADS)

Kim, Dowan; Byun, Joongmoo; Lee, Minho; Choi, Jihoon; Kim, Myungsun

2017-01-01

Most microseismic events occur during hydraulic fracturing. Thus microseismic monitoring, by recording seismic waves from microseismic events, is one of the best methods for locating the positions of hydraulic fractures. However, since microseismic events have very low energy, the data often have a low signal-to-noise ratio (S/N ratio) and it is not easy to pick the first arrival time. In this study, we suggest a new fast picking method optimised for noisy data using cross-correlation and stacking. In this method, a reference trace is selected and the time differences between the first arrivals of the reference trace and those of the other traces are computed by cross-correlation. Then, all traces are aligned with the reference trace by time shifting, and the aligned traces are summed together to produce a stacked reference trace that has a considerably improved S/N ratio. After the first arrival time of the stacked reference trace is picked, the first arrival time of each trace is calculated automatically using the time differences obtained in the cross-correlation process. In experiments with noisy synthetic data and field data, this method produces more reliable results than the traditional method, which picks the first arrival time of each noisy trace separately. In addition, the computation time is dramatically reduced.

Element specificity of ortho-positronium annihilation for alkali-metal loaded SiO2 glasses.

PubMed

Sato, K; Hatta, T

2015-03-07

Momentum distributions associated with ortho-positronium (o-Ps) pick-off annihilation photon are often influenced by light elements, as, e.g., carbon, oxygen, and fluorine. This phenomenon, so-called element specificity of o-Ps pick-off annihilation, has been utilized for studying the elemental environment around the open spaces. To gain an insight into the element specificity of o-Ps pick-off annihilation, the chemical shift of oxygen 1s binding energy and the momentum distributions associated with o-Ps pick-off annihilation were systematically investigated for alkali-metal loaded SiO2 glasses by means of X-ray photoelectron spectroscopy and positron-age-momentum correlation spectroscopy, respectively. Alkali metals introduced into the open spaces surrounded by oxygen atoms cause charge transfer from alkali metals to oxygen atoms, leading to the lower chemical shift for the oxygen 1s binding energy. The momentum distribution of o-Ps localized into the open spaces is found to be closely correlated with the oxygen 1s chemical shift. This correlation with the deepest 1s energy level evidences that the element specificity of o-Ps originates from pick-off annihilation with orbital electrons, i.e., dominantly with oxygen 2p valence electrons and s electrons with lower probability.

An Introduction to SPEAR (Seismogram Picking Error from Analyst Review)

NASA Astrophysics Data System (ADS)

Zeiler, C. P.; Velasco, A. A.; Anderson, D.; Pingitore, N. E.

2008-12-01

A grassroots initiative began in February of 2008 at the University of Texas at El Paso to understand how seismologists measure earthquakes. The Seismogram Picking Error from Analyst Review (SPEAR) project is designed to be a forum where seismologists can propose, discuss and experimentally test theories on proper procedures to identify and measure seismic phases. We outline the history of seismogram analysis and explore areas of seismogram analysis that still need to be defined. The main concern for SPEAR, at this time, is the impact of picking errors produced by merging earthquake catalogs. Our initial effort has been to establish a common data set for seismologists to pick. The preliminary studies from this data set have shown that significant bias between authors of catalogs may exist. We provide techniques to ensure that these biases can be identified and correctly managed to provide accurate mergers of earthquake measurements. The overall goal of SPEAR is to provide a repository of information to aid seismologists in comparing and sharing measurements. We want to document in the repository and explore all aspects of the picking process, from the basics of learning how to read a seismogram to complex transformations and enhancements of signals. Your participation in SPEAR will aid the seismological community to close the knowledge gaps that exist in seismogram analysis.

A Laser Stabilization System for Rydberg Atom Physics

DTIC Science & Technology

2015-09-06

offset locking method which we did. For each system, a small amount of light from a 852 nm (780 nm) diode laser is picked off from the output beam ...this way, tunable sidebands, from 1-10 GHz, that are themselves modulated at .05-5 MHz, can be generated on the input laser beam . The light from the...phase modulation signal. This signal is fed back into the fast (10 MHz bandwidth) locking electronics of the diode laser system to lock the laser to

High Fidelity Tape Transfer Printing Based On Chemically Induced Adhesive Strength Modulation

NASA Astrophysics Data System (ADS)

Sim, Kyoseung; Chen, Song; Li, Yuhang; Kammoun, Mejdi; Peng, Yun; Xu, Minwei; Gao, Yang; Song, Jizhou; Zhang, Yingchun; Ardebili, Haleh; Yu, Cunjiang

2015-11-01

Transfer printing, a two-step process (i.e. picking up and printing) for heterogeneous integration, has been widely exploited for the fabrication of functional electronics system. To ensure a reliable process, strong adhesion for picking up and weak or no adhesion for printing are required. However, it is challenging to meet the requirements of switchable stamp adhesion. Here we introduce a simple, high fidelity process, namely tape transfer printing(TTP), enabled by chemically induced dramatic modulation in tape adhesive strength. We describe the working mechanism of the adhesion modulation that governs this process and demonstrate the method by high fidelity tape transfer printing several types of materials and devices, including Si pellets arrays, photodetector arrays, and electromyography (EMG) sensors, from their preparation substrates to various alien substrates. High fidelity tape transfer printing of components onto curvilinear surfaces is also illustrated.

Development of a screening system for cystic fibrosis.

PubMed

Coury, A J; Fogt, E J; Norenberg, M S; Untereker, D F

1983-09-01

We have developed a simple method for detecting high concentrations of chloride in sweat from ambulatory subjects, a measurement useful in the detection of cystic fibrosis. The method is based on the standard approach of stimulating sweat generation through iontophoresis of pilocarpine nitrate into the skin, followed by collection and analysis of the sweat for chloride concentration. The sweat-stimulating reagents are contained in polymeric gel pads, which are used in conjunction with a small battery-powered stimulator. The chloride analysis is subsequently done on the stimulated site by use of a thin test patch that picks up a fixed amount of sweat and changes color if the chloride concentration is higher than a predetermined value. The successful completion of a test is indicated by a fill tab, which changes color when the appropriate amount of sweat has been picked up by the chloride test patch.

A universal denoising and peak picking algorithm for LC-MS based on matched filtration in the chromatographic time domain.

PubMed

Andreev, Victor P; Rejtar, Tomas; Chen, Hsuan-Shen; Moskovets, Eugene V; Ivanov, Alexander R; Karger, Barry L

2003-11-15

A new denoising and peak picking algorithm (MEND, matched filtration with experimental noise determination) for analysis of LC-MS data is described. The algorithm minimizes both random and chemical noise in order to determine MS peaks corresponding to sample components. Noise characteristics in the data set are experimentally determined and used for efficient denoising. MEND is shown to enable low-intensity peaks to be detected, thus providing additional useful information for sample analysis. The process of denoising, performed in the chromatographic time domain, does not distort peak shapes in the m/z domain, allowing accurate determination of MS peak centroids, including low-intensity peaks. MEND has been applied to denoising of LC-MALDI-TOF-MS and LC-ESI-TOF-MS data for tryptic digests of protein mixtures. MEND is shown to suppress chemical and random noise and baseline fluctuations, as well as filter out false peaks originating from the matrix (MALDI) or mobile phase (ESI). In addition, MEND is shown to be effective for protein expression analysis by allowing selection of a large number of differentially expressed ICAT pairs, due to increased signal-to-noise ratio and mass accuracy.

[A quick algorithm of dynamic spectrum photoelectric pulse wave detection based on LabVIEW].

PubMed

Lin, Ling; Li, Na; Li, Gang

2010-02-01

Dynamic spectrum (DS) detection is attractive among the numerous noninvasive blood component detection methods because of the elimination of the main interference of the individual discrepancy and measure conditions. DS is a kind of spectrum extracted from the photoelectric pulse wave and closely relative to the artery blood. It can be used in a noninvasive blood component concentration examination. The key issues in DS detection are high detection precision and high operation speed. The precision of measure can be advanced by making use of over-sampling and lock-in amplifying on the pick-up of photoelectric pulse wave in DS detection. In the present paper, the theory expression formula of the over-sampling and lock-in amplifying method was deduced firstly. Then in order to overcome the problems of great data and excessive operation brought on by this technology, a quick algorithm based on LabVIEW and a method of using external C code applied in the pick-up of photoelectric pulse wave were presented. Experimental verification was conducted in the environment of LabVIEW. The results show that by the method pres ented, the speed of operation was promoted rapidly and the data memory was reduced largely.

Automatic detection of lift-off and touch-down of a pick-up walker using 3D kinematics.

PubMed

Grootveld, L; Thies, S B; Ogden, D; Howard, D; Kenney, L P J

2014-02-01

Walking aids have been associated with falls and it is believed that incorrect use limits their usefulness. Measures are therefore needed that characterize their stable use and the classification of key events in walking aid movement is the first step in their development. This study presents an automated algorithm for detection of lift-off (LO) and touch-down (TD) events of a pick-up walker. For algorithm design and initial testing, a single user performed trials for which the four individual walker feet lifted off the ground and touched down again in various sequences, and for different amounts of frame loading (Dataset_1). For further validation, ten healthy young subjects walked with the pick-up walker on flat ground (Dataset_2a) and on a narrow beam (Dataset_2b), to challenge balance. One 88-year-old walking frame user was also assessed. Kinematic data were collected with a 3D optoelectronic camera system. The algorithm detected over 93% of events (Dataset_1), and 95% and 92% in Dataset_2a and b, respectively. Of the various LO/TD sequences, those associated with natural progression resulted in up to 100% correctly identified events. For the 88-year-old walking frame user, 96% of LO events and 93% of TD events were detected, demonstrating the potential of the approach. Copyright © 2013 IPEM. Published by Elsevier Ltd. All rights reserved.

A Model of an Integrated Air Defense System (IADS) for the TACOPS program

DTIC Science & Technology

1991-09-01

SUBJECT TERMS (Continue on reverse If necessary and Identify by block number) FIELD GROUP SUB-GROUP Integrated Air Defense System, iADS, TACOPS...needed. Selection criteria for picking a Measurement Of Effectiveness (MOE) are presented. Acceslon For I NTIS CRA&I DTIC TAB 0 Unannouticed 1 ...Justification B y ............................................... Di.,t ibiation Av.iabilily Codes Avai i:.djor Dist A- 1 THESIS DISCLAIMER The reader is cautioned

61. Picking Floor, Large Pile of Waste Rock and Wood ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

61. Picking Floor, Large Pile of Waste Rock and Wood date unknown Historic Photograph, Photographer Unknown; Collection of William Everett, Jr. (Wilkes-Barre, PA), photocopy by Joseph E.B. Elliot - Huber Coal Breaker, 101 South Main Street, Ashley, Luzerne County, PA

Metastable Behavior for Bootstrap Percolation on Regular Trees

NASA Astrophysics Data System (ADS)

Biskup, Marek; Schonmann, Roberto H.

2009-08-01

We examine bootstrap percolation on a regular ( b+1)-ary tree with initial law given by Bernoulli( p). The sites are updated according to the usual rule: a vacant site becomes occupied if it has at least θ occupied neighbors, occupied sites remain occupied forever. It is known that, when b> θ≥2, the limiting density q= q( p) of occupied sites exhibits a jump at some p T= p T( b, θ)∈(0,1) from q T:= q( p T)<1 to q( p)=1 when p> p T. We investigate the metastable behavior associated with this transition. Explicitly, we pick p= p T+ h with h>0 and show that, as h ↓0, the system lingers around the "critical" state for time order h -1/2 and then passes to fully occupied state in time O(1). The law of the entire configuration observed when the occupation density is q∈( q T,1) converges, as h ↓0, to a well-defined measure.

Web information retrieval based on ontology

NASA Astrophysics Data System (ADS)

Zhang, Jian

2013-03-01

The purpose of the Information Retrieval (IR) is to find a set of documents that are relevant for a specific information need of a user. Traditional Information Retrieval model commonly used in commercial search engine is based on keyword indexing system and Boolean logic queries. One big drawback of traditional information retrieval is that they typically retrieve information without an explicitly defined domain of interest to the users so that a lot of no relevance information returns to users, which burden the user to pick up useful answer from these no relevance results. In order to tackle this issue, many semantic web information retrieval models have been proposed recently. The main advantage of Semantic Web is to enhance search mechanisms with the use of Ontology's mechanisms. In this paper, we present our approach to personalize web search engine based on ontology. In addition, key techniques are also discussed in our paper. Compared to previous research, our works concentrate on the semantic similarity and the whole process including query submission and information annotation.

Mouse handling limits the impact of stress on metabolic endpoints.

PubMed

Ghosal, Sriparna; Nunley, Amanda; Mahbod, Parinaz; Lewis, Alfor G; Smith, Eric P; Tong, Jenny; D'Alessio, David A; Herman, James P

2015-10-15

Studies focused on end-points that are confounded by stress are best performed under minimally stressful conditions. The objective of this study was to demonstrate the impact of handling designed to reduce animal stress on measurements of glucose tolerance. A cohort of mice (CD1.C57BL/6) naïve to any specific handling was subjected to either a previously described "cup" handling method, or a "tail-picked" method in which the animals were picked up by the tail (as is common for metabolic studies). Following training, an elevated plus maze (EPM) test was performed followed by measurement of blood glucose and plasma corticosterone. A second cohort (CD1.C57BL/6) was rendered obese by exposure to a high fat diet, handled with either the tail-picked or cup method and subjected to an intraperitoneal glucose tolerance test. A third cohort of C57BL/6 mice was exposed to a cup regimen that included a component of massage and was subjected to tests of anxiety-like behavior, glucose homeostasis, and corticosterone secretion. We found that the cup mice showed reduced anxiety-like behaviors in the EPM coupled with a reduction in blood glucose levels compared to mice handled by the tail-picked method. Additionally, cup mice on the high fat diet exhibited improved glucose tolerance compared to tail-picked controls. Finally, we found that the cup/massage group showed lower glucose levels following an overnight fast, and decreased anxiety-like behaviors associated with lower stress-induced plasma corticosterone concentration compared to tail-picked controls. These data demonstrate that application of handling methods that reduce anxiety-like behaviors in mice mitigates the confounding contribution of stress to interpretation of metabolic endpoints (such as glucose tolerance). Copyright © 2015 Elsevier Inc. All rights reserved.

Relationship between concussion history and neurocognitive test performance in National Football League draft picks.

PubMed

Solomon, Gary S; Kuhn, Andrew

2014-04-01

There are limited empirical data available regarding the relationship between concussion history and neurocognitive functioning in active National Football League (NFL) players in general and NFL draft picks in particular. Potential NFL draft picks undergo 2 neurocognitive tests at the National Invitational Camp (Scouting Combine) every year: the Wonderlic and, since 2011, the Immediate Post-concussion Assessment and Cognitive Testing (ImPACT). After conclusion of the combine and before the draft, NFL teams invite potential draft picks to their headquarters for individual visits where further assessment may occur. To examine the relationship between concussion history and neurocognitive performance (ImPACT and Wonderlic) in a sample of elite NFL draft picks. Cohort study; Level of evidence, 3. Over 7 years, 226 potential draft picks were invited to visit a specific NFL team's headquarters after the combine. The athletes were divided into 3 groups based on self-reported concussion history: no prior concussions, 1 prior concussion, and 2 or more prior concussions. Neurocognitive measures of interest included Wonderlic scores (provided by the NFL team) and ImPACT composite scores (administered either at the combine or during a visit to the team headquarters). The relationship between concussion history and neurocognitive scores was assessed, as were the relationships among the 2 neurocognitive tests. Concussion history had no relationship to neurocognitive performance on either the Wonderlic or ImPACT. Concussion history did not affect performance on either neurocognitive test, suggesting that for this cohort, a history of concussion may not have adverse effects on neurocognitive functioning as measured by these 2 tests. This study reveals no correlation between concussion history and neurocognitive test scores (ImPACT, Wonderlic) in soon-to-be active NFL athletes.

Computer vision-based automated peak picking applied to protein NMR spectra.

PubMed

Klukowski, Piotr; Walczak, Michal J; Gonczarek, Adam; Boudet, Julien; Wider, Gerhard

2015-09-15

A detailed analysis of multidimensional NMR spectra of macromolecules requires the identification of individual resonances (peaks). This task can be tedious and time-consuming and often requires support by experienced users. Automated peak picking algorithms were introduced more than 25 years ago, but there are still major deficiencies/flaws that often prevent complete and error free peak picking of biological macromolecule spectra. The major challenges of automated peak picking algorithms is both the distinction of artifacts from real peaks particularly from those with irregular shapes and also picking peaks in spectral regions with overlapping resonances which are very hard to resolve by existing computer algorithms. In both of these cases a visual inspection approach could be more effective than a 'blind' algorithm. We present a novel approach using computer vision (CV) methodology which could be better adapted to the problem of peak recognition. After suitable 'training' we successfully applied the CV algorithm to spectra of medium-sized soluble proteins up to molecular weights of 26 kDa and to a 130 kDa complex of a tetrameric membrane protein in detergent micelles. Our CV approach outperforms commonly used programs. With suitable training datasets the application of the presented method can be extended to automated peak picking in multidimensional spectra of nucleic acids or carbohydrates and adapted to solid-state NMR spectra. CV-Peak Picker is available upon request from the authors. gsw@mol.biol.ethz.ch; michal.walczak@mol.biol.ethz.ch; adam.gonczarek@pwr.edu.pl Supplementary data are available at Bioinformatics online. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

Observing the preservation and decline of abilities in dementias.

PubMed

Williams, Robert B; French, Laurence A; Ferrell, Richard B

2006-12-01

The Brief Cognitive Rating Scale facilitated observation of the preservation and decline of abilities due to dementias among 73 female and 52 male residents at nursing homes in a northeastern and southwestern state. They ranged in age from 41 to 102 years (M=78, SD = 10.5). Dementia diagnoses included presenile Alzheimers, senile Alzheimers, Vascular Dementia, Dementia secondary to Huntington's Disease, Dementia due to Pick's Disease, and Korsakoff Dementia secondary to chronic alcoholism. Their ratings on tasks of the scale were submitted to an order analysis procedure to explore the order of decline and preservation of abilities. Results for these nursing home residents show an apparent order: loss singly or concurrently of the abilities of concentration and recent memory, followed by past memory and functioning and self-care that also appeared to be unpredictably lost or preserved singly or concurrently by different individuals, and, finally, by orientation that was preserved in 82% of the subjects.

Induced Pluripotent Stem Cells for Disease Modeling and Evaluation of Therapeutics for Niemann-Pick Disease Type A.

PubMed

Long, Yan; Xu, Miao; Li, Rong; Dai, Sheng; Beers, Jeanette; Chen, Guokai; Soheilian, Ferri; Baxa, Ulrich; Wang, Mengqiao; Marugan, Juan J; Muro, Silvia; Li, Zhiyuan; Brady, Roscoe; Zheng, Wei

2016-12-01

: Niemann-Pick disease type A (NPA) is a lysosomal storage disease caused by mutations in the SMPD1 gene that encodes acid sphingomyelinase (ASM). Deficiency in ASM function results in lysosomal accumulation of sphingomyelin and neurodegeneration. Currently, there is no effective treatment for NPA. To accelerate drug discovery for treatment of NPA, we generated induced pluripotent stem cells from two patient dermal fibroblast lines and differentiated them into neural stem cells. The NPA neural stem cells exhibit a disease phenotype of lysosomal sphingomyelin accumulation and enlarged lysosomes. By using this disease model, we also evaluated three compounds that reportedly reduced lysosomal lipid accumulation in Niemann-Pick disease type C as well as enzyme replacement therapy with ASM. We found that α-tocopherol, δ-tocopherol, hydroxypropyl-β-cyclodextrin, and ASM reduced sphingomyelin accumulation and enlarged lysosomes in NPA neural stem cells. Therefore, the NPA neural stem cells possess the characteristic NPA disease phenotype that can be ameliorated by tocopherols, cyclodextrin, and ASM. Our results demonstrate the efficacies of cyclodextrin and tocopherols in the NPA cell-based model. Our data also indicate that the NPA neural stem cells can be used as a new cell-based disease model for further study of disease pathophysiology and for high-throughput screening to identify new lead compounds for drug development. Currently, there is no effective treatment for Niemann-Pick disease type A (NPA). To accelerate drug discovery for treatment of NPA, NPA-induced pluripotent stem cells were generated from patient dermal fibroblasts and differentiated into neural stem cells. By using the differentiated NPA neuronal cells as a cell-based disease model system, α-tocopherol, δ-tocopherol, and hydroxypropyl-β-cyclodextrin significantly reduced sphingomyelin accumulation in these NPA neuronal cells. Therefore, this cell-based NPA model can be used for further study of disease pathophysiology and for high-throughput screening of compound libraries to identify lead compounds for drug development. ©AlphaMed Press.

The antagonistic modulation of Arp2/3 activity by N-WASP, WAVE2 and PICK1 defines dynamic changes in astrocyte morphology

PubMed Central

Murk, Kai; Blanco Suarez, Elena M.; Cockbill, Louisa M. R.; Banks, Paul; Hanley, Jonathan G.

2013-01-01

Summary Astrocytes exhibit a complex, branched morphology, allowing them to functionally interact with numerous blood vessels, neighboring glial processes and neuronal elements, including synapses. They also respond to central nervous system (CNS) injury by a process known as astrogliosis, which involves morphological changes, including cell body hypertrophy and thickening of major processes. Following severe injury, astrocytes exhibit drastically reduced morphological complexity and collectively form a glial scar. The mechanistic details behind these morphological changes are unknown. Here, we investigate the regulation of the actin-nucleating Arp2/3 complex in controlling dynamic changes in astrocyte morphology. In contrast to other cell types, Arp2/3 inhibition drives the rapid expansion of astrocyte cell bodies and major processes. This intervention results in a reduced morphological complexity of astrocytes in both dissociated culture and in brain slices. We show that this expansion requires functional myosin II downstream of ROCK and RhoA. Knockdown of the Arp2/3 subunit Arp3 or the Arp2/3 activator N-WASP by siRNA also results in cell body expansion and reduced morphological complexity, whereas depleting WAVE2 specifically reduces the branching complexity of astrocyte processes. By contrast, knockdown of the Arp2/3 inhibitor PICK1 increases astrocyte branching complexity. Furthermore, astrocyte expansion induced by ischemic conditions is delayed by PICK1 knockdown or N-WASP overexpression. Our findings identify a new morphological outcome for Arp2/3 activation in restricting rather than promoting outwards movement of the plasma membrane in astrocytes. The Arp2/3 regulators PICK1, and N-WASP and WAVE2 function antagonistically to control the complexity of astrocyte branched morphology, and this mechanism underlies the morphological changes seen in astrocytes during their response to pathological insult. PMID:23843614

Multiple metasomatic events recorded in Kilbourne Hole peridotite xenoliths: the relative contribution of host basalt interaction vs. silicate metasomatic glass

NASA Astrophysics Data System (ADS)

Hammond, S. J.; Yoshikawa, M.; Harvey, J.; Burton, K. W.

2010-12-01

Stark differences between bulk-rock lithophile trace element budgets and the sum of the contributions from their constituent minerals are common, if not ubiquitous in peridotite xenoliths [1]. In the absence of modal metasomatism this discrepancy is often attributed to the “catch-all”, yet often vague process of cryptic metasomatism. This study presents comprehensive Sr-Nd isotope ratios for variably metasomatized bulk-rock peridotites, host basalts, constituent peridotite mineral phases and interstitial glass from 13 spinel lherzolite and harzburgite xenoliths from the Kilbourne Hole volcanic maar, New Mexico, USA. Similar measurements were also made on hand-picked interstitial glass from one of the most highly metasomatized samples (KH03-16) in an attempt to unravel the effects of multiple metasomatic events. In all Kilbourne Hole peridotites analysed, hand-picked, optically clean clinopyroxenes preserve a more primitive Sr isotope signature than the corresponding bulk-rock; a pattern preserved in all but one sample for Nd isotope measurements. Reaction textures, avoided during hand-picking, around clinopyroxene grains are evident in the most metasomatized samples and accompanied by films of high-SiO2 interstitial glass. The margins of primary minerals appear partially resorbed and trails of glassy melt inclusions similar in appearance to those previously reported from the same locality [2], terminate in these films. Hand-picked glass from KH03-16 reveals the most enriched 87Sr/86Sr of any component recovered from these xenoliths (87Sr/86Sr = 0.708043 ± 0.00009; [Sr] = 81 ppm). Similarly, the 143Nd/144Nd of the glass is amongst the most enriched of the peridotite components (143Nd/144Nd = 0.512893 ± 0.000012; [Nd] = 10 ppm). However, the host basalt (87Sr/86Sr = 0.703953 ± 0.00012; 143Nd/144Nd = 0.512873 ± 0.000013), similar in composition to nearby contemporaneous Potrillo Volcanic Field basalts [3], contains nearly an order of magnitude more Sr and more than three times more Nd ([Sr] = 655 ppm; [Nd] = 34 ppm) than the interstitial glass. While the enriched nature of the host basalt, combined with high [Sr] and [Nd], makes it the most likely candidate for the enrichment of the peridotite bulk rocks, mixing between clinopyroxenes and the host basalt cannot account for the full range of bulk-rock Sr-Nd isotope ratios and nearly half of the xenoliths require an additional component that could involve varying amounts of interstitial glass. Moreover, three bulk-rock samples require a further, as yet unidentified component in order to explain the bulk-rock Sr-Nd isotope composition fully, implying that at least three episodes of metasomatism/refertilization must have occurred prior to the arrival of the xenoliths at the surface in their host lava. References: [1] Bedini & Bodinier (1999) Geochim. Cosmochim. Acta 63, 3883-3900. [2] Schiano & Clocchiatti (1994) Nature 368, 622-624. [3] Thompson et al., (2005) J. Petrol. 46, 1603-1643.

Bayesian peak picking for NMR spectra.

PubMed

Cheng, Yichen; Gao, Xin; Liang, Faming

2014-02-01

Protein structure determination is a very important topic in structural genomics, which helps people to understand varieties of biological functions such as protein-protein interactions, protein-DNA interactions and so on. Nowadays, nuclear magnetic resonance (NMR) has often been used to determine the three-dimensional structures of protein in vivo. This study aims to automate the peak picking step, the most important and tricky step in NMR structure determination. We propose to model the NMR spectrum by a mixture of bivariate Gaussian densities and use the stochastic approximation Monte Carlo algorithm as the computational tool to solve the problem. Under the Bayesian framework, the peak picking problem is casted as a variable selection problem. The proposed method can automatically distinguish true peaks from false ones without preprocessing the data. To the best of our knowledge, this is the first effort in the literature that tackles the peak picking problem for NMR spectrum data using Bayesian method. Copyright © 2013. Production and hosting by Elsevier Ltd.

STS-9 and Amateur Radio. NASA Educational Briefs for the Classroom.

ERIC Educational Resources Information Center

National Aeronautics and Space Administration, Washington, DC.

Designed for secondary and postsecondary school students, the article discusses the STS-9 (Space Transportation System), a hand-held amateur radio (ham) station used on the Space Shuttle Columbia. The article details the mechanics of this battery-powered unit and how it is used. Separate sections discuss necessary equipment for picking up space…

Automated Speech Intelligibility System for Head-Borne Personal Protective Equipment: Proof of Concept

DTIC Science & Technology

2008-04-01

selected as the listener headform for this effort. The HATS has binaural sound quality microphones inserted into the ear canals and rubber pinnae that...Blank 16 APPENDIX - WORD LISTS AND SUBJECT RESPONSES MRT Set 1 (spoken word is in bold type) kick, lick, sick, tick, wick, pick neat, beat , seat, meat

Taking the "Next Great Step" for Maryland Public Schools: State of Education Report, 2010

ERIC Educational Resources Information Center

Maryland State Department of Education, 2010

2010-01-01

Maryland public schools continue to pick up honors and receive recognition for the work going on in their classrooms. For the second straight year, Maryland's education system has been ranked as number one in the nation by "Education Week", the nation's leading education publication. The "College Board" followed that up by…

Uncertainty analysis in seismic tomography

NASA Astrophysics Data System (ADS)

Owoc, Bartosz; Majdański, Mariusz

2017-04-01

Velocity field from seismic travel time tomography depends on several factors like regularization, inversion path, model parameterization etc. The result also strongly depends on an initial velocity model and precision of travel times picking. In this research we test dependence on starting model in layered tomography and compare it with effect of picking precision. Moreover, in our analysis for manual travel times picking the uncertainty distribution is asymmetric. This effect is shifting the results toward faster velocities. For calculation we are using JIVE3D travel time tomographic code. We used data from geo-engineering and industrial scale investigations, which were collected by our team from IG PAS.

Evaluation of peak-picking algorithms for protein mass spectrometry.

PubMed

Bauer, Chris; Cramer, Rainer; Schuchhardt, Johannes

2011-01-01

Peak picking is an early key step in MS data analysis. We compare three commonly used approaches to peak picking and discuss their merits by means of statistical analysis. Methods investigated encompass signal-to-noise ratio, continuous wavelet transform, and a correlation-based approach using a Gaussian template. Functionality of the three methods is illustrated and discussed in a practical context using a mass spectral data set created with MALDI-TOF technology. Sensitivity and specificity are investigated using a manually defined reference set of peaks. As an additional criterion, the robustness of the three methods is assessed by a perturbation analysis and illustrated using ROC curves.

Structure and yarn sensor for fabric

DOEpatents

Mee, David K.; Allgood, Glenn O.; Mooney, Larry R.; Duncan, Michael G.; Turner, John C.; Treece, Dale A.

1998-01-01

A structure and yarn sensor for fabric directly determines pick density in a fabric thereby allowing fabric length and velocity to be calculated from a count of the picks made by the sensor over known time intervals. The structure and yarn sensor is also capable of detecting full length woven defects and fabric. As a result, an inexpensive on-line pick (or course) density measurement can be performed which allows a loom or knitting machine to be adjusted by either manual or automatic means to maintain closer fiber density tolerances. Such a sensor apparatus dramatically reduces fabric production costs and significantly improves fabric consistency and quality for woven or knitted fabric.

Structure and yarn sensor for fabric

DOEpatents

Mee, D.K.; Allgood, G.O.; Mooney, L.R.; Duncan, M.G.; Turner, J.C.; Treece, D.A.

1998-10-20

A structure and yarn sensor for fabric directly determines pick density in a fabric thereby allowing fabric length and velocity to be calculated from a count of the picks made by the sensor over known time intervals. The structure and yarn sensor is also capable of detecting full length woven defects and fabric. As a result, an inexpensive on-line pick (or course) density measurement can be performed which allows a loom or knitting machine to be adjusted by either manual or automatic means to maintain closer fiber density tolerances. Such a sensor apparatus dramatically reduces fabric production costs and significantly improves fabric consistency and quality for woven or knitted fabric. 13 figs.

[Results of requesting a second consecutive sperm ejaculate on the day of oocyte pick-up in assisted reproductive technology].

PubMed

Zhai, Dan-mei; Li, Mu-jun; Jiang, Li; Qin, Ai-ping; Li, Liu-ming; Hang, Fu

2011-05-01

To evaluate the results of requesting a second consecutive sperm ejaculate in order to reduce ICSI cycles by PESA or TESE on the day of oocyte pick-up in assisted reproductive technology (ART). We collected 68 semen samples as a second consecutive ejaculate from 34 men, compared the semen volume and sperm concentration, motility and total count between the first and the second ejaculation, and analyzed the laboratory results and clinical outcomes of fertilization with the mixed sperm. The 34 males ejaculated twice within 4 hours by masturbation, with an interval of 26-183 (94.9 +/- 39.8) minutes between the first and second ejaculation. The volume of the first ejaculate was (2.0 +/- 1.4) ml, significantly higher than that of the second ([1.5 +/- 0.9] ml) (P = 0.007), although the numbers of motile sperm and grade a + b sperm of the first ([40.8 +/- 25.3]% and [30.9 +/- 22.4]%) were significantly lower than those of the second ([52.2 +/- 21.1]% and [39.9 +/- 17.5]%) (P < 0.05). There were no statistically significant differences in the sperm concentration or total sperm count between the two ejaculates (P > 0.05). The ICSI, IVF + ICSI, and IVF cycles were 3, 3 and 28 respectively among the 34 couples undergoing ART. The number of retrieved oocytes, normal fertilization rate, high quality embryo rate and frozen cycles/fresh transfer cycles ratio were 15.5 +/- 8.7, 57.0% (247/433), 58.7% (145/247) and 20/24 for the IVF cycle, 21.7 +/- 8.3, 61.5% (40/65), 67.5% (27/40) and 3/2 for the ICSI cycle, and 10.0 +/- 2.6, 72.4% (21/29), 66.7% (14/21) and 3/3 for the IVF + ICSI cycle. Fourteen live births were achieved out of the 18 pregnancies, including 6 healthy boys and 9 healthy girls. A clinical pregnancy rate of >30% can be achieved by requesting a second consecutive sperm ejaculate on the day of oocyte pick-up in order to collect more sperm and/or increase the total number of motile sperm for ART. And this method can avoid other invasive sperm processing techniques and the need of unnecessary micromanipulative fertilization.

41 CFR 102-37.60 - How much time does a transferee have to pick up or remove surplus property from holding agency...

Code of Federal Regulations, 2010 CFR

2010-07-01

...) FEDERAL MANAGEMENT REGULATION PERSONAL PROPERTY 37-DONATION OF SURPLUS PERSONAL PROPERTY General Provisions Donation Overview § 102-37.60 How much time does a transferee have to pick up or remove surplus...

41 CFR 102-37.60 - How much time does a transferee have to pick up or remove surplus property from holding agency...

Code of Federal Regulations, 2013 CFR

2013-07-01

...) FEDERAL MANAGEMENT REGULATION PERSONAL PROPERTY 37-DONATION OF SURPLUS PERSONAL PROPERTY General Provisions Donation Overview § 102-37.60 How much time does a transferee have to pick up or remove surplus...

41 CFR 102-37.60 - How much time does a transferee have to pick up or remove surplus property from holding agency...

Code of Federal Regulations, 2012 CFR

2012-01-01

...) FEDERAL MANAGEMENT REGULATION PERSONAL PROPERTY 37-DONATION OF SURPLUS PERSONAL PROPERTY General Provisions Donation Overview § 102-37.60 How much time does a transferee have to pick up or remove surplus...

41 CFR 102-37.60 - How much time does a transferee have to pick up or remove surplus property from holding agency...

Code of Federal Regulations, 2014 CFR

2014-01-01

...) FEDERAL MANAGEMENT REGULATION PERSONAL PROPERTY 37-DONATION OF SURPLUS PERSONAL PROPERTY General Provisions Donation Overview § 102-37.60 How much time does a transferee have to pick up or remove surplus...

41 CFR 102-37.60 - How much time does a transferee have to pick up or remove surplus property from holding agency...

Code of Federal Regulations, 2011 CFR

2011-01-01

...) FEDERAL MANAGEMENT REGULATION PERSONAL PROPERTY 37-DONATION OF SURPLUS PERSONAL PROPERTY General Provisions Donation Overview § 102-37.60 How much time does a transferee have to pick up or remove surplus...

Pick-N-Pull Auto Dismantlers, Kansas City, LLC Inc. - Clean Water Act Public Notice

EPA Pesticide Factsheets

The EPA is providing notice of a proposed Administrative Penalty Assessment against Pick-N-Pull Auto Dismantlers, Kansas City, LLC, a subsidiary of Schnitzer Steel Industries, Inc., for alleged violations at its facilities at 8012 East Truman Rd., Kansas C

Coagulation measurement from whole blood using vibrating optical fiber in a disposable cartridge

NASA Astrophysics Data System (ADS)

Yaraş, Yusuf Samet; Gündüz, Ali Bars; Saǧlam, Gökhan; Ölçer, Selim; Civitçi, Fehmi; Baris, İbrahim; Yaralioǧlu, Göksenin; Urey, Hakan

2017-11-01

In clinics, blood coagulation time measurements are performed using mechanical measurements with blood plasma. Such measurements are challenging to do in a lab-on-a-chip (LoC) system using a small volume of whole blood. Existing LoC systems use indirect measurement principles employing optical or electrochemical methods. We developed an LoC system using mechanical measurements with a small volume of whole blood without requiring sample preparation. The measurement is performed in a microfluidic channel where two fibers are placed inline with a small gap in between. The first fiber operates near its mechanical resonance using remote magnetic actuation and immersed in the sample. The second fiber is a pick-up fiber acting as an optical sensor. The microfluidic channel is engineered innovatively such that the blood does not block the gap between the vibrating fiber and the pick-up fiber, resulting in high signal-to-noise ratio optical output. The control plasma test results matched well with the plasma manufacturer's datasheet. Activated-partial-thromboplastin-time tests were successfully performed also with human whole blood samples, and the method is proven to be effective. Simplicity of the cartridge design and cost of readily available materials enable a low-cost point-of-care device for blood coagulation measurements.

Coagulation measurement from whole blood using vibrating optical fiber in a disposable cartridge.

PubMed

Yaraş, Yusuf Samet; Gündüz, Ali Bars; Sağlam, Gökhan; Ölçer, Selim; Civitçi, Fehmi; Baris, İbrahim; Yaralioğlu, Göksenin; Urey, Hakan

2017-11-01

In clinics, blood coagulation time measurements are performed using mechanical measurements with blood plasma. Such measurements are challenging to do in a lab-on-a-chip (LoC) system using a small volume of whole blood. Existing LoC systems use indirect measurement principles employing optical or electrochemical methods. We developed an LoC system using mechanical measurements with a small volume of whole blood without requiring sample preparation. The measurement is performed in a microfluidic channel where two fibers are placed inline with a small gap in between. The first fiber operates near its mechanical resonance using remote magnetic actuation and immersed in the sample. The second fiber is a pick-up fiber acting as an optical sensor. The microfluidic channel is engineered innovatively such that the blood does not block the gap between the vibrating fiber and the pick-up fiber, resulting in high signal-to-noise ratio optical output. The control plasma test results matched well with the plasma manufacturer's datasheet. Activated-partial-thromboplastin-time tests were successfully performed also with human whole blood samples, and the method is proven to be effective. Simplicity of the cartridge design and cost of readily available materials enable a low-cost point-of-care device for blood coagulation measurements. (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE).

A Robot System for Remote Book Browsing

NASA Astrophysics Data System (ADS)

Tomizawa, Tetsuo; Ohya, Akihisa; Yuta, Shin'ichi

This paper describes a system which uses a mobile manipulator located in a library as a teleoperated tool for browsing books from a remote location via the Internet. In the process of developing this system, we designed and built a robot system, specially equipped for the accomplishment of browsing determined books, which is mainly categorized by 3 basic goals: (1) picking up the book by using a manipulator, (2) opening the book and (3) turning pages by a developed browsing device. Likewise, this paper also describes the human interface by the integration of Internet technologies, and summarize some considerations about the system.

29 CFR 551.8 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... as picking up and returning the delivery vehicle at the beginning and end of the workday, cleaning... in loading or unloading the goods, and picking up empty containers or other goods from customers for... local deliveries. (f) A plan of compensation on the basis of trip rates or other delivery payment plan...

Visual Persistence and Information Pick-up in Learning Disabled Children.

ERIC Educational Resources Information Center

Mazer, Suzanne R.; And Others

1983-01-01

Two experiments tested possible explanations for previous research demonstrating lower span of apprehension for learning disabled students. In experiment 1, the length of visual persistence was less for LD subjects, while in experiment 2, the rate of information pick-up was slower for LD subjects. (CL)

Pick's Theorem: What a Lemon!

ERIC Educational Resources Information Center

Russell, Alan R.

2004-01-01

Pick's theorem can be used in various ways just like a lemon. This theorem generally finds its way in the syllabus approximately at the middle school level and in fact at times students have even calculated the area of a state considering its outline with the help of the above theorem.

77 FR 36017 - Regulatory Guide 7.3, Procedures for Picking Up and Receiving Packages of Radioactive Material

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-15

... Receiving Packages of Radioactive Material AGENCY: Nuclear Regulatory Commission. ACTION: Notice of... Guide (RG) 7.3, ``Procedures for Picking Up and Receiving Packages of Radioactive Material.'' The guide..., ``Administrative Guide for Verifying Compliance with Packaging Requirements for Shipment and Receipt of Radioactive...

Description of third instar larvae of Anastrepha curitis, Anastrepha pickeli and Anastrepha pulchra (Diptera: Tephritidae)

USDA-ARS?s Scientific Manuscript database

We describe and illustrate for the first time the third instar larvae of three Anastrepha species, Anastrepha pickeli Lima, Anastrepha pulchra Stone, and Anastrepha curitis Stone, and also the second instar of A. curitis. Internal structures, such as the cephalopharyngeal skeleton and spiracles, and...

Superconducting Quantum Interferometers for Nondestructive Evaluation

PubMed Central

Kostyurina, E. A.; Kalashnikov, K. V.; Maslennikov, Yu. V.; Koshelets, V. P.

2017-01-01

We review stationary and mobile systems that are used for the nondestructive evaluation of room temperature objects and are based on superconducting quantum interference devices (SQUIDs). The systems are optimized for samples whose dimensions are between 10 micrometers and several meters. Stray magnetic fields from small samples (10 µm–10 cm) are studied using a SQUID microscope equipped with a magnetic flux antenna, which is fed through the walls of liquid nitrogen cryostat and a hole in the SQUID’s pick-up loop and returned sidewards from the SQUID back to the sample. The SQUID microscope does not disturb the magnetization of the sample during image recording due to the decoupling of the magnetic flux antenna from the modulation and feedback coil. For larger samples, we use a hand-held mobile liquid nitrogen minicryostat with a first order planar gradiometric SQUID sensor. Low-Tc DC SQUID systems that are designed for NDE measurements of bio-objects are able to operate with sufficient resolution in a magnetically unshielded environment. High-Tc DC SQUID magnetometers that are operated in a magnetic shield demonstrate a magnetic field resolution of ~4 fT/√Hz at 77 K. This sensitivity is improved to ~2 fT/√Hz at 77 K by using a soft magnetic flux antenna. PMID:29210980

Testing of a First Order AC Magnetic Susceptometer

NASA Astrophysics Data System (ADS)

Fukuda, Ryan; Sunny, Smitha; Ho, Pei-Chun

2011-11-01

A first-order AC magnetic susceptometer has been constructed and tested to find the magnetic response of strongly correlated electron materials. The instrument works by using a primary coil to apply a small AC magnetic field of .104 Oe to a sample with a cylindrical coil space of length .635 cm and diameter .355 cm. A lock-in amplifier is used to monitor the induced voltage from a set of secondary coils. By coupling a temperature-controlled system with this instrument, the change in the magnetic signal with respect to temperature is measured. Monitoring the signal changes may indicate the temperature that causes the material to transition to either a ferromagnetic, anti-ferromagnetic, or superconducting state. A 122.47 mg Gd polycrystal was used to test our susceptometer. The data qualitatively agrees with the previous results of magnetization vs. temperature of Gd single crystals by Nigh et al. [1]: there is a steep increase in the pick-up signal at 300 K where Gd becomes ferromagnetic and a peak at 210 K [1]. This susceptometer will be used for our future investigation of magnetic properties of rare earth compounds and nanoparticles in the temperature range of 10 K to 300 K. [4pt] [1] H. E. Nigh, S. Legvold, and F. H. Spedding, Physical Review 132, 1092 (1963)

N-Acetylcysteine in the Treatment of Excoriation Disorder: A Randomized Clinical Trial.

PubMed

Grant, Jon E; Chamberlain, Samuel R; Redden, Sarah A; Leppink, Eric W; Odlaug, Brian L; Kim, Suck Won

2016-05-01

Excoriation (skin-picking) disorder (SPD) is a disabling, underrecognized condition in which individuals repeatedly pick at their skin, leading to noticeable tissue damage. To date, there has been no clearly effective pharmacologic or psychological treatment for SPD. To determine whether N-acetylcysteine, an amino acid that appears to restore extracellular glutamate concentration in the nucleus accumbens, will be more effective than placebo in reducing compulsive picking behavior. A randomized, double-blind trial was conducted at ambulatory care centers at the University of Minnesota (September 12, 2011, to June 15, 2012) and the University of Chicago (December 17, 2012, to June 26, 2015) and included 66 adults with SPD. Data analysis was performed from July 16 to September 9, 2015. N-acetylcysteine (dosing range, 1200-3000 mg/d) or placebo was administered for 12 weeks. Participants were assessed using measures of skin-picking severity, including the modified Yale-Brown Obsessive Compulsive Scale (NE-YBOCS); total scores range from 0 to 40, with higher scores reflective of greater symptom severity. Another measure of skin-picking severity was the Clinical Global Impression-Severity Scale; total scores range from 1 (normal) to 7 (among the most extremely ill patients), and improvement ratings range from 7 (very much worse) to 1 (very much improved). Selected cognitive tasks included the Intra-dimensional/Extra-dimensional Shift Task to examine cognitive flexibility, with the key outcome measures being the number of errors, and Stop-Signal Reaction Time task, which evaluates motor inhibition. Outcomes were examined using a linear mixed-effects model. Of the 66 participants (31 randomized to placebo and 35 to N-acetylcysteine) included in the analysis, 59 (89%) were women; mean (SD) age was 34.8 (11.0) years. Compared with placebo, N-acetylcysteine treatment was associated with significant improvements in the NE-YBOCS. At baseline, NE-YBOCS scores were 18.9 and 17.9 for the treatment and placebo groups, respectively, and at 12 weeks, the scores were 11.5 and 14.1 for the treatment and placebo groups, respectively (P = .048). For the Clinical Global Impression-Severity scale, baseline scores were 3.5 and 4.0 and 12-week scores were 3.0 and 4.2, respectively (P = .003). These effects were significant both in terms of treatment by time interactions and post hoc tests at 1 or more individual time points. At the study's end point, of the 53 participants who completed the study, 15 of the 32 participants (47%) receiving N-acetylcysteine were much or very much improved compared with 4 of the 21 participants (19%) receiving placebo (P = .03). There were no significant differences between the active and placebo arms in terms of psychosocial functioning. N-acetylcysteine treatment resulted in significant reductions in skin-picking symptoms and was well tolerated. The glutamate system may prove a beneficial target in treating SPD and other compulsive behaviors. clinicaltrials.gov Identifier: NCT01063348.

Binding of canonical Wnt ligands to their receptor complexes occurs in ordered plasma membrane environments.

PubMed

Sezgin, Erdinc; Azbazdar, Yagmur; Ng, Xue W; Teh, Cathleen; Simons, Kai; Weidinger, Gilbert; Wohland, Thorsten; Eggeling, Christian; Ozhan, Gunes

2017-08-01

While the cytosolic events of Wnt/β-catenin signaling (canonical Wnt signaling) pathway have been widely studied, only little is known about the molecular mechanisms involved in Wnt binding to its receptors at the plasma membrane. Here, we reveal the influence of the immediate plasma membrane environment on the canonical Wnt-receptor interaction. While the receptors are distributed both in ordered and disordered environments, Wnt binding to its receptors selectively occurs in more ordered membrane environments which appear to cointernalize with the Wnt-receptor complex. Moreover, Wnt/β-catenin signaling is significantly reduced when the membrane order is disturbed by specific inhibitors of certain lipids that prefer to localize at the ordered environments. Similarly, a reduction in Wnt signaling activity is observed in Niemann-Pick Type C disease cells where trafficking of ordered membrane lipid components to the plasma membrane is genetically impaired. We thus conclude that ordered plasma membrane environments are essential for binding of canonical Wnts to their receptor complexes and downstream signaling activity. © 2017 The Authors. The FEBS Journal published by John Wiley & Sons Ltd on behalf of Federation of European Biochemical Societies.

Difference magnitude is not measured by discrimination steps for order of point patterns.

PubMed

Protonotarios, Emmanouil D; Johnston, Alan; Griffin, Lewis D

2016-07-01

We have shown in previous work that the perception of order in point patterns is consistent with an interval scale structure (Protonotarios, Baum, Johnston, Hunter, & Griffin, 2014). The psychophysical scaling method used relies on the confusion between stimuli with similar levels of order, and the resulting discrimination scale is expressed in just-noticeable differences (jnds). As with other perceptual dimensions, an interesting question is whether suprathreshold (perceptual) differences are consistent with distances between stimuli on the discrimination scale. To test that, we collected discrimination data, and data based on comparison of perceptual differences. The stimuli were jittered square lattices of dots, covering the range from total disorder (Poisson) to perfect order (square lattice), roughly equally spaced on the discrimination scale. Observers picked the most ordered pattern from a pair, and the pair of patterns with the greatest difference in order from two pairs. Although the judgments of perceptual difference were found to be consistent with an interval scale, like the discrimination judgments, no common interval scale that could predict both sets of data was possible. In particular, the midpattern of the perceptual scale is 11 jnds away from the ordered end, and 5 jnds from the disordered end of the discrimination scale.

Sensitivity analysis by approximation formulas - Illustrative examples. [reliability analysis of six-component architectures

NASA Technical Reports Server (NTRS)

White, A. L.

1983-01-01

This paper examines the reliability of three architectures for six components. For each architecture, the probabilities of the failure states are given by algebraic formulas involving the component fault rate, the system recovery rate, and the operating time. The dominant failure modes are identified, and the change in reliability is considered with respect to changes in fault rate, recovery rate, and operating time. The major conclusions concern the influence of system architecture on failure modes and parameter requirements. Without this knowledge, a system designer may pick an inappropriate structure.

Expert System Enhancement to the Resource Allocation Modules of the NCS Emergency Preparedness Management Information System (EPMIS)

DTIC Science & Technology

1987-01-01

after the MYCIN expert system. Host Computer PC+ is available on both symbolic and numeric computers. It operates on: the IBM PC AT, TI Bus- Pro (IBM PC...suppose that the data baseTool picks up pace contains 100 motors, and in only one case does a lightweight motor pro . duce more power than heavier units...every sor, ART 2.0. In the bargain it con - the figure). decision point takes time. More sub- sumes 10 times less storage. ART 3.0 reduces the comparison

Randomly picked cosmid clones overlap the pyrB and oriC gap in the physical map of the E. coli chromosome.

PubMed Central

Knott, V; Rees, D J; Cheng, Z; Brownlee, G G

1988-01-01

Sets of overlapping cosmid clones generated by random sampling and fingerprinting methods complement data at pyrB (96.5') and oriC (84') in the published physical map of E. coli. A new cloning strategy using sheared DNA, and a low copy, inducible cosmid vector were used in order to reduce bias in libraries, in conjunction with micro-methods for preparing cosmid DNA from a large number of clones. Our results are relevant to the design of the best approach to the physical mapping of large genomes. PMID:2834694

Measured success.

PubMed

Chambers, David W

2002-01-01

Some practices "wing it," some pick outcomes after the fact in order to look good. But neither of these approaches creates much confidence that next year will be okay, let alone better. Using measurement to improve practice requires understanding the interplay among mission, vision, core values, key success factors, and performance indicators. Combined intelligently, these five elements drive strategic planning and budgeting. They also lead to monitoring progress toward success. This is best done with a balanced scorecard that includes leading and lagging indicators of mission and vision. Indicators should be sampled to represent the practice and monitored against targets to propel the practice toward success.

Stem cells and niemann pick disease.

PubMed

Andolina, Marino

2014-05-01

Niemann Pick A disease causes a progressive accumulation of sphyngomyelin in several organs and the survival of the patients is usually limited to three years. We describe the outcome of a patient suffering from Niemann Pick A disease, who first underwent an haploidentical bone marrow transplantation, and then intrathecal and I.V injections of mesenchymal cells. While the outcome of bone marrow transplantation was a complete failure, one month after the treatment with the mesenchymal cells the patient improved from the psychomotor and the parenchymal storage perspective. When hypersplenism was solved platelets rose quickly from 20,000 to 120,000/microliter. Therefore cellular therapy should be considered as a possible choice of treatment of NPA disease.

Maniac Talk - Dr. Brian Dennis

NASA Image and Video Library

2014-09-24

Brian Dennis Maniac Lecture, September 24, 2014 NASA Solar Physicist Dr. Brian Dennis presented a Maniac Talk entitled "From Picking Potatoes to Measuring the Biggest Bangs in the Solar System -- Always a Farm Boy!" Brian described his formative years in England, then summarized our present understanding of how solar flares work and reviewed possible advances in instrumentation that could lead to major breakthroughs in the future.

Research on moving object detection based on frog's eyes

NASA Astrophysics Data System (ADS)

Fu, Hongwei; Li, Dongguang; Zhang, Xinyuan

2008-12-01

On the basis of object's information processing mechanism with frog's eyes, this paper discussed a bionic detection technology which suitable for object's information processing based on frog's vision. First, the bionics detection theory by imitating frog vision is established, it is an parallel processing mechanism which including pick-up and pretreatment of object's information, parallel separating of digital image, parallel processing, and information synthesis. The computer vision detection system is described to detect moving objects which has special color, special shape, the experiment indicates that it can scheme out the detecting result in the certain interfered background can be detected. A moving objects detection electro-model by imitating biologic vision based on frog's eyes is established, the video simulative signal is digital firstly in this system, then the digital signal is parallel separated by FPGA. IN the parallel processing, the video information can be caught, processed and displayed in the same time, the information fusion is taken by DSP HPI ports, in order to transmit the data which processed by DSP. This system can watch the bigger visual field and get higher image resolution than ordinary monitor systems. In summary, simulative experiments for edge detection of moving object with canny algorithm based on this system indicate that this system can detect the edge of moving objects in real time, the feasibility of bionic model was fully demonstrated in the engineering system, and it laid a solid foundation for the future study of detection technology by imitating biologic vision.

Increasing component functionality via multi-process additive manufacturing

NASA Astrophysics Data System (ADS)

Coronel, Jose L.; Fehr, Katherine H.; Kelly, Dominic D.; Espalin, David; Wicker, Ryan B.

2017-05-01

Additively manufactured components, although extensively customizable, are often limited in functionality. Multi-process additive manufacturing (AM) grants the ability to increase the functionality of components via subtractive manufacturing, wire embedding, foil embedding and pick and place. These processes are scalable to include several platforms ranging from desktop to large area printers. The Multi3D System is highlighted, possessing the capability to perform the above mentioned processes, all while transferring a fabricated component with a robotic arm. Work was conducted to fabricate a patent inspired, printed missile seeker. The seeker demonstrated the advantage of multi-process AM via introduction of the pick and place process. Wire embedding was also explored, with the successful interconnect of two layers of embedded wires in different planes. A final demonstration of a printed contour bracket, served to show the reduction of surface roughness on a printed part is 87.5% when subtractive manufacturing is implemented in tandem with AM. Functionality of the components on all the cases was improved. Results included optical components embedded within the printed housing, wires embedded with interconnection, and reduced surface roughness. These results highlight the improved functionality of components through multi-process AM, specifically through work conducted with the Multi3D System.

Kinematics of mechanical and adhesional micromanipulation under a scanning electron microscope

NASA Astrophysics Data System (ADS)

Saito, Shigeki; Miyazaki, Hideki T.; Sato, Tomomasa; Takahashi, Kunio

2002-11-01

In this paper, the kinematics of mechanical and adhesional micromanipulation using a needle-shaped tool under a scanning electron microscope is analyzed. A mode diagram is derived to indicate the possible micro-object behavior for the specified operational conditions. Based on the diagram, a reasonable method for pick and place operation is proposed. The keys to successful analysis are to introduce adhesional and rolling-resistance factors into the kinematic system consisting of a sphere, a needle-shaped tool, and a substrate, and to consider the time dependence of these factors due to the electron-beam (EB) irradiation. Adhesional force and the lower limit of maximum rolling resistance are evaluated quantitatively in theoretical and experimental ways. This analysis shows that it is possible to control the fracture of either the tool-sphere or substrate-sphere interface of the system selectively by the tool-loading angle and that such a selective fracture of the interfaces enables reliable pick or place operation even under EB irradiation. Although the conventional micromanipulation was not repeatable because the technique was based on an empirically effective method, this analysis should provide us with a guideline to reliable micromanipulation.

Case Report: Ursodeoxycholic acid treatment in Niemann-Pick disease type C; clinical experience in four cases

PubMed Central

Movsesyan, Nina; Platt, Frances M.

2017-01-01

In this case series, we demonstrate that Ursodeoxycholic acid (UDCA) improves liver dysfunction in Niemann-Pick type C (NPC) and may restore a suppressed cytochrome p450 system. NPC disease is a progressive neurodegenerative lysosomal storage disease caused by mutations in either the NPC1 or NPC2 genes. Liver disease is a common feature presenting either acutely as cholestatic jaundice in the neonatal period, or in later life as elevated liver enzymes indicative of liver dysfunction. Recently, an imbalance in bile acid synthesis in a mouse model of NPC disease was linked to suppression of the P450 detoxification system and was corrected by UDCA treatment. UDCA (3α, 7β-dihydroxy-5β-cholanic acid), a hydrophilic bile acid, is used to treat various cholestatic disorders. In this report we summarise the findings from four independent cases of NPC, three with abnormal liver enzyme levels at baseline, that were subsequently treated with UDCA. The patients differed in age and clinical features, they all tolerated the drug well, and in those with abnormal liver function, there were significant improvements in their liver enzyme parameters. PMID:29119141

Continuation: The EOSDIS testbed data system

NASA Technical Reports Server (NTRS)

Emery, Bill; Kelley, Timothy D.

1995-01-01

The continuation of the EOSDIS testbed ('Testbed') has materialized from a multi-task system to a fully functional stand-alone data archive distribution center that once was only X-Windows driven to a system that is accessible by all types of users and computers via the World Wide Web. Throughout the past months, the Testbed has evolved into a completely new system. The current system is now accessible through Netscape, Mosaic, and all other servers that can contact the World Wide Web. On October 1, 1995 we will open to the public and we expect that the statistics of the type of user, where they are located, and what they are looking for will drastically change. What is the most important change in the Testbed has been the Web interface. This interface will allow more users access to the system and walk them through the data types with more ease than before. All of the callbacks are written in such a way that icons can be used to easily move around in the programs interface. The homepage offers the user the opportunity to go and get more information about each satellite data type and also information on free programs. These programs are grouped into categories for types of computers that the programs are compiled for, along with information on how to FTP the programs back to the end users computer. The heart of the Testbed is still the acquisition of satellite data. From the Testbed homepage, the user selects the 'access to data system' icon, which will take them to the world map and allow them to select an area that they would like coverage on by simply clicking that area of the map. This creates a new map where other similar choices can be made to get the latitude and longitude of the region the satellite data will cover. Once a selection has been made the search parameters page will appear to be filled out. Afterwards, the browse image will be called for once the search is completed and the images for viewing can be selected. There are several other option pages, but once an order has been selected the Testbed will bring up the order list page and the user will then be able to place their order. After the order has been completed, the Testbed will mail the user to notify them of the completed order and how the images can be picked up.

46 CFR 185.512 - Recommended emergency instructions format.

Code of Federal Regulations, 2010 CFR

2010-10-01

... flooding. (i) Close all watertight and weathertight doors, hatches, and airports to prevent taking water aboard or further flooding in the vessel. (ii) Keep bilges dry to prevent loss of stability due to water... pick up person in the water, or maneuver the vessel to pick up the person in the water. (iv) Have crew...

77 FR 40385 - Withdrawal of Regulatory Guide 7.3; Procedures for Picking Up and Receiving Packages of...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-09

... Picking Up and Receiving Packages of Radioactive Material AGENCY: Nuclear Regulatory Commission. ACTION... Receiving Packages of Radioactive Material.'' The RG is being withdrawn because it is outdated and the..., ``Administrative Guide for Verifying Compliance with Packaging Requirements for Shipment and Receipt of Radioactive...

"Micro-robots" pick up a glass bead

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2011-01-01

"Micro-robots", which are really collections of particles animated by magnetic fields, pick up a glass bead and move it around the screen. Each movement is precisely controlled. The "asters" were designed by Alexey Snezkho and Igor Aronson at Argonne National Laboratory. Video courtesy Nature Materials. Read the full story at http://go.usa.gov/KAT

Phenomenological Characteristics, Social Problems, and the Economic Impact Associated with Chronic Skin Picking

ERIC Educational Resources Information Center

Flessner, Christopher A.; Woods, Douglas W.

2006-01-01

In this study, the authors collected data on the demographic characteristics, phenomenology, and social and economic impact of skin picking. A total of 92 participants completed an anonymous, Internet-based survey through a link to the Trichotillomania Learning Center's home page. Results indicated that skin pickers experienced social,…

Normative values and the effects of age, gender, and handedness on the Moberg Pick-Up Test.

PubMed

Amirjani, Nasim; Ashworth, Nigel L; Gordon, Tessa; Edwards, David C; Chan, K Ming

2007-06-01

The Moberg Pick-Up Test is a standardized test for assessing hand dexterity. Although reduction of sensation in the hand occurs with aging, the effect of age on a subject's performance of the Moberg Pick-Up Test has not been examined. The primary goal of this study was to examine the impact of aging and, secondarily, the impact of gender and handedness, on performance of the Moberg Pick-Up Test in 116 healthy subjects. The average time to complete each of the four subsets of the test was analyzed using the Kruskal-Wallis, Mann-Whitney U, and Wilcoxon signed-rank tests. The results show that hand dexterity of the subjects was significantly affected by age, with young subjects being the fastest and elderly subjects the slowest. Women accomplished the test faster than men, and task performance with the dominant hand was faster than with the non-dominant hand. Use of normative values established based on age and gender is a valuable objective tool to gauge hand function in patients with different neurologic disorders.

Capacitively readout multi-element sensor array with common-mode cancellation

DOEpatents

Britton, Jr., Charles L.; Warmack, Robert J.; Bryan, William L.; Jones, Robert L.; Oden, Patrick Ian; Thundat, Thomas

2001-01-01

An improved multi-element apparatus for detecting the presence of at least one chemical, biological or physical component in a monitored area comprising an array or single set of the following elements: a capacitive transducer having at least one cantilever spring element secured thereto, the cantilever element having an area thereof coated with a chemical having an affinity for the component to be detected; a pick-up plate positioned adjacent to the cantilever element at a distance such that a capacitance between the cantilever element and the pick-up plate changes as the distance between the cantilever element and the pick-up plate varies, the change in capacitance being a measurable variation; a detection means for measuring the measurable variation in the capacitance between the cantilever element and the pick-up plate that forms a measurement channel signal; and at least one feedback cantilever spring element positioned apart from the coated cantilever element, the cantilever element substantially unaffected by the component being monitored and providing a reference channel signal to the detection means that achieves a common mode cancellation between the measurement channel signal and reference channel signal.

Peak picking NMR spectral data using non-negative matrix factorization.

PubMed

Tikole, Suhas; Jaravine, Victor; Rogov, Vladimir; Dötsch, Volker; Güntert, Peter

2014-02-11

Simple peak-picking algorithms, such as those based on lineshape fitting, perform well when peaks are completely resolved in multidimensional NMR spectra, but often produce wrong intensities and frequencies for overlapping peak clusters. For example, NOESY-type spectra have considerable overlaps leading to significant peak-picking intensity errors, which can result in erroneous structural restraints. Precise frequencies are critical for unambiguous resonance assignments. To alleviate this problem, a more sophisticated peaks decomposition algorithm, based on non-negative matrix factorization (NMF), was developed. We produce peak shapes from Fourier-transformed NMR spectra. Apart from its main goal of deriving components from spectra and producing peak lists automatically, the NMF approach can also be applied if the positions of some peaks are known a priori, e.g. from consistently referenced spectral dimensions of other experiments. Application of the NMF algorithm to a three-dimensional peak list of the 23 kDa bi-domain section of the RcsD protein (RcsD-ABL-HPt, residues 688-890) as well as to synthetic HSQC data shows that peaks can be picked accurately also in spectral regions with strong overlap.

Autoimmune abnormality affects ovulation and oocyte-pick-up in MRL/MpJ-Fas lpr/lpr mice.

PubMed

Hosotani, M; Ichii, O; Nakamura, T; Kanazawa, S O; Elewa, Y Hosny Ali; Kon, Y

2018-01-01

Ovulation and oocyte-pick-up are essential processes in fertilization. Herein, we found associations between autoimmune disease and the aforementioned processes in mice. At three and six months, along with the evaluation of autoimmune disease indices, the ovary, mesosalpinx, and oviducts were histologically examined in C57BL/6, MRL/MpJ, and MRL/MpJ-Fas lpr/lpr mice as healthy control, mild and severe models of autoimmune disease, respectively. In superovulated mice, the number of "oocyte cumulus complexes" found in the ampulla was macroscopically counted, and that of "ovulated oocytes" was histologically evaluated, as indicated by ruptured follicles or corpora hemorrhagica in ovaries. Finally, the oocyte-pick-up rate was calculated. In MRL/MpJ-Fas lpr/lpr mice, the oocyte-pick-up rate decreased with disease-related deterioration, unlike in other mouse strains. Further, more ovulated oocytes were found in MRL/MpJ mice than in C57BL/6 mice, and this number significantly decreased with aging in MRL/MpJ-Fas lpr/lpr mice. Numerous T-cells infiltrated into the infundibulum or a part of the mesosalpinx in aged MRL/MpJ-Fas lpr/lpr mice, and their infundibulum showed swelling and fewer ciliated epithelial cells compared to that of C57BL/6 mice. In conclusion, the progression of severe autoimmune disease affected the oocyte-pick-up process through histopathological changes in the infundibulum. These results provide important insights into female infertility associated with autoimmune disease.

Mitigation of Atmospheric Effects on Imaging Systems

DTIC Science & Technology

2004-03-31

focal length. The imaging system had two cameras: an Electrim camera sensitive in the visible (0.6 µ m) waveband and an Amber QWIP infrared camera...sensitive in the 9–micron region. The Amber QWIP infrared camera had 256x256 pixels, pixel pitch 38 mµ , focal length of 1.8 m, FOV of 5.4 x5.4 mr...each day. Unfortunately, signals from the different read ports of the Electrim camera picked up noise on their way to the digitizer, and this resulted

Antioxidant Therapies for Ulcerative Dermatitis: A Potential Model for Skin Picking Disorder

PubMed Central

George, Nneka M.; Whitaker, Julia; Vieira, Giovana; Geronimo, Jerome T.; Bellinger, Dwight A.; Fletcher, Craig A.; Garner, Joseph P.

2015-01-01

Skin Picking Disorder affects 4% of the general population, with serious quality of life impacts, and potentially life threatening complications. Standard psychoactive medications do not help most patients. Similarly, Mouse Ulcerative Dermatitis (skin lesions caused by excessive abnormal grooming behavior) is very common in widely used inbred strains of mice, and represents a serious animal welfare issue and cause of mortality. Treatment options for Ulcerative Dermatitis are largely palliative and ineffective. We have proposed mouse Ulcerative Dermatitis as a model for human Skin Picking Disorder based on similar epidemiology, behavior, and its comorbidity and mechanistic overlap with hair pulling (trichotillomania). We predicted that mouse Ulcerative Dermatitis would be treated by N-Acetylcysteine, as this compound is highly effective in treating both Skin Picking Disorder and Trichotillomania. Furthermore, we hypothesized that N-Acetylcysteine’s mode of action is as a precursor to the production of the endogenous antioxidant glutathione in the brain, and therefore intranasal glutathione would also treat Ulcerative Dermatitis. Accordingly, we show in a heterogenous prospective trial, the significant reduction in Ulcerative Dermatitis lesion severity in mice receiving either N-acetylcysteine (oral administration) or glutathione (intranasal). The majority of mice treated with N-acetylcysteine improved slowly throughout the course of the study. Roughly half of the mice treated with glutathione showed complete resolution of lesion within 2-4 weeks, while the remainder did not respond. These findings are the first to show that the use of N-acetylcysteine and Glutathione can be curative for mouse Ulcerative Dermatitis. These findings lend additional support for mouse Ulcerative Dermatitis as a model of Skin Picking Disorder and also support oxidative stress and glutathione synthesis as the mechanism of action for these compounds. As N-Acetylcysteine is poorly tolerated by many patients, intranasal glutathione warrants further study as potential therapy in Skin Picking, trichotillomania and other body-focused repetitive behavior disorders. PMID:26167859

An automatic P‐Phase arrival‐time picker

USGS Publications Warehouse

Kalkan, Erol

2016-01-01

Presented is a new approach for picking P‐phase arrival time in single‐component acceleration or broadband velocity records without requiring detection interval or threshold settings. The algorithm PPHASEPICKER transforms the signal into a response domain of a single‐degree‐of‐freedom (SDOF) oscillator with viscous damping and then tracks the rate of change of dissipated damping energy to pick P‐wave phases. The SDOF oscillator has a short natural period and a correspondingly high resonant frequency, which is higher than most frequencies in a seismic wave. It also has a high damping ratio (60% of critical). At this damping level, the frequency response approaches the Butterworth maximally flat magnitude filter, and phase angles are preserved. The relative input energy imparted to the oscillator by the input signal is converted to elastic strain energy and then dissipated by the damping element as damping energy. The damping energy yields a smooth envelope over time; it is zero in the beginning of the signal, zero or near zero before theP‐phase arrival, and builds up rapidly with the P wave. Because the damping energy function changes considerably at the onset of the P wave, it is used as a metric to track and pick the P‐phase arrival time. The PPHASEPICKER detects P‐phase onset using the histogram method. Its performance is compared with picking techniques using short‐term‐average to long‐term‐average ratio, and a picking method that finds the first P‐phase arrival time using the Akaike information criterion. A large set of records with various intensities and signal‐to‐noise ratios is used for testing the PPHASEPICKER, and it is demonstrated thatPPHASEPICKER is able to more accurately pick the onset of genuine signals against the background noise and to correctly distinguish between whether the first arrival is a P wave (emergent or impulsive) or whether the signal is from a faulty sensor.

Antioxidant Therapies for Ulcerative Dermatitis: A Potential Model for Skin Picking Disorder.

PubMed

George, Nneka M; Whitaker, Julia; Vieira, Giovana; Geronimo, Jerome T; Bellinger, Dwight A; Fletcher, Craig A; Garner, Joseph P

2015-01-01

Skin Picking Disorder affects 4% of the general population, with serious quality of life impacts, and potentially life threatening complications. Standard psychoactive medications do not help most patients. Similarly, Mouse Ulcerative Dermatitis (skin lesions caused by excessive abnormal grooming behavior) is very common in widely used inbred strains of mice, and represents a serious animal welfare issue and cause of mortality. Treatment options for Ulcerative Dermatitis are largely palliative and ineffective. We have proposed mouse Ulcerative Dermatitis as a model for human Skin Picking Disorder based on similar epidemiology, behavior, and its comorbidity and mechanistic overlap with hair pulling (trichotillomania). We predicted that mouse Ulcerative Dermatitis would be treated by N-Acetylcysteine, as this compound is highly effective in treating both Skin Picking Disorder and Trichotillomania. Furthermore, we hypothesized that N-Acetylcysteine's mode of action is as a precursor to the production of the endogenous antioxidant glutathione in the brain, and therefore intranasal glutathione would also treat Ulcerative Dermatitis. Accordingly, we show in a heterogenous prospective trial, the significant reduction in Ulcerative Dermatitis lesion severity in mice receiving either N-acetylcysteine (oral administration) or glutathione (intranasal). The majority of mice treated with N-acetylcysteine improved slowly throughout the course of the study. Roughly half of the mice treated with glutathione showed complete resolution of lesion within 2-4 weeks, while the remainder did not respond. These findings are the first to show that the use of N-acetylcysteine and Glutathione can be curative for mouse Ulcerative Dermatitis. These findings lend additional support for mouse Ulcerative Dermatitis as a model of Skin Picking Disorder and also support oxidative stress and glutathione synthesis as the mechanism of action for these compounds. As N-Acetylcysteine is poorly tolerated by many patients, intranasal glutathione warrants further study as potential therapy in Skin Picking, trichotillomania and other body-focused repetitive behavior disorders.

Tuned mass damping system for a pendulum in gravity and microgravity fields

NASA Astrophysics Data System (ADS)

Atour, Farah

2016-07-01

An electrodynamic tether is a simple idea, but one with an amazing number of uses. Electrodynamic tether is a long conductor wire that is attached to the satellite, which can act as a generator or motor, from its motion through the earth's magnetic field. And it has the potential to make space travel significantly cheaper. The lack of electrodynamic tether's widespread in common applications can be attributed to the variable Lorentz forces occuring on the tethers, which will cause them to oscillate and may go out of control, de-orbit the satellite and fall to Earth. A tuned mass damper system, for short refered as tilger, is suggested as damper of oscillations of tethers. A system composed of a tuned mass damper and a simple pendulum simulating the tether was therefore constructed. 350 sets of experimental trials were done on the system, while it was installed inside a drop tower capsule resting on the ground, in order to pick four optimum setup experiments that will undergo a series of microgravity experiments at the Bremen Drop Tower in Bremen, Germany. The GJU Bachelor Research students found that the oscillations of the simple pendulum will not be affected by the tilger during the free fall experiment, except if a feedback mechanism is installed between the simple pendulum and the tilger. In this case, the tilger will dampen the simple pendulum oscillations during free fall.

Ultrafast optomechanical pulse picking

NASA Astrophysics Data System (ADS)

Lilienfein, Nikolai; Holzberger, Simon; Pupeza, Ioachim

2017-01-01

State-of-the-art optical switches for coupling pulses into and/or out of resonators are based on either the electro-optic or the acousto-optic effect in transmissive elements. In high-power applications, the damage threshold and other nonlinear and thermal effects in these elements impede further improvements in pulse energy, duration, and average power. We propose a new optomechanical switching concept which is based solely on reflective elements and is suitable for switching times down to the ten-nanosecond range. To this end, an isolated section of a beam path is moved in a system comprising mirrors rotating at a high angular velocity and stationary imaging mirrors, without affecting the propagation of the beam thereafter. We discuss three variants of the concept and exemplify practical parameters for its application in regenerative amplifiers and stack-and-dump enhancement cavities. We find that optomechanical pulse picking has the potential to achieve switching rates of up to a few tens of kilohertz while supporting pulse energies of up to several joules.

Automatic Phase Picker for Local and Teleseismic Events Using Wavelet Transform and Simulated Annealing

NASA Astrophysics Data System (ADS)

Gaillot, P.; Bardaine, T.; Lyon-Caen, H.

2004-12-01

Since recent years, various automatic phase pickers based on the wavelet transform have been developed. The main motivation for using wavelet transform is that they are excellent at finding the characteristics of transient signals, they have good time resolution at all periods, and they are easy to program for fast execution. Thus, the time-scale properties and flexibility of the wavelets allow detection of P and S phases in a broad frequency range making their utilization possible in various context. However, the direct application of an automatic picking program in a different context/network than the one for which it has been initially developed is quickly tedious. In fact, independently of the strategy involved in automatic picking algorithms (window average, autoregressive, beamforming, optimization filtering, neuronal network), all developed algorithms use different parameters that depend on the objective of the seismological study, the region and the seismological network. Classically, these parameters are manually defined by trial-error or calibrated learning stage. In order to facilitate this laborious process, we have developed an automated method that provide optimal parameters for the picking programs. The set of parameters can be explored using simulated annealing which is a generic name for a family of optimization algorithms based on the principle of stochastic relaxation. The optimization process amounts to systematically modifying an initial realization so as to decrease the value of the objective function, getting the realization acceptably close to the target statistics. Different formulations of the optimization problem (objective function) are discussed using (1) world seismicity data recorded by the French national seismic monitoring network (ReNass), (2) regional seismicity data recorded in the framework of the Corinth Rift Laboratory (CRL) experiment, (3) induced seismicity data from the gas field of Lacq (Western Pyrenees), and (4) micro-seismicity data from glacier monitoring. The developed method is discussed and tested using our wavelet version of the standard STA-LTA algorithm.

Pick-N Multiple Choice-Exams: A Comparison of Scoring Algorithms

ERIC Educational Resources Information Center

Bauer, Daniel; Holzer, Matthias; Kopp, Veronika; Fischer, Martin R.

2011-01-01

To compare different scoring algorithms for Pick-N multiple correct answer multiple-choice (MC) exams regarding test reliability, student performance, total item discrimination and item difficulty. Data from six 3rd year medical students' end of term exams in internal medicine from 2005 to 2008 at Munich University were analysed (1,255 students,…

What Skills and Tactics Are Needed to Play Adult Pick-Up Basketball Games?

ERIC Educational Resources Information Center

Wang, Jianyu; Liu, Wenhao; Moffit, Jeffrey

2010-01-01

The purpose of this study was to examine skill levels and performance patterns of regular players of pick-up basketball games. By a survey, 65 participants were identified as regular players and participated in the study. An observational instrument used to analyze game performance of the participants was developed and both content and construct…

Children's Developing Knowledge of "Wh"-/Quantifier Question-Answer Relations

ERIC Educational Resources Information Center

Achimova, Asya; Syrett, Kristen; Musolino, Julien; Déprez, Viviane

2017-01-01

In response to questions in which a "wh"-term interacts with a universal quantifier in object position, such as "Who picked every toy?," children as old as 5 years of age often provide a list, pairing toys with the people who picked each of them. This response pattern is unexpected, it has been claimed, because children appear…

A Model Recycling Program: UNC Takes Action as Landfill Space Shrinks and Costs Rise.

ERIC Educational Resources Information Center

Sherman, Rhonda L.

1991-01-01

The University of North Carolina responded to escalating waste disposal costs and shrinking landfill space with a structured program of recycling, including a mobile recycling drop, student family housing recycling, a newspaper drop-off site, high-volume glass pick-up, high-volume newspaper pick-up, and cardboard recycling. Campus-wide cooperation…

Acceptance-Enhanced Behavior Therapy (AEBT) for Trichotillomania and Chronic Skin Picking: Exploring the Effects of Component Sequencing

ERIC Educational Resources Information Center

Flessner, Christopher A.; Busch, Andrew M.; Heideman, Paul W.; Woods, Douglas W.

2008-01-01

This pilot study examined the utility of acceptance-enhanced behavior therapy (AEBT) for trichotillomania (TTM) and chronic skin picking (CSP) and the impact of altering treatment sequence on overall treatment efficacy. Participants referred to a TTM and CSP specialty clinic were assessed by an independent evaluator within separate, nonconcurrent,…

Stem Cells and Niemann Pick Disease

PubMed Central

Andolina, Marino

2014-01-01

Background and Objectives: Niemann Pick A disease causes a progressive accumulation of sphyngomyelin in several organs and the survival of the patients is usually limited to three years. We describe the outcome of a patient suffering from Niemann Pick A disease, who first underwent an haploidentical bone marrow transplantation, and then intrathecal and I.V injections of mesenchymal cells. Methods and Results: While the outcome of bone marrow transplantation was a complete failure, one month after the treatment with the mesenchymal cells the patient improved from the psychomotor and the parenchymal storage perspective. When hypersplenism was solved platelets rose quickly from 20,000 to 120,000/microliter. Conclusions: Therefore cellular therapy should be considered as a possible choice of treatment of NPA disease. PMID:24921025

Improved Simulation of the Pre-equilibrium Triton Emission in Nuclear Reactions Induced by Nucleons

NASA Astrophysics Data System (ADS)

Konobeyev, A. Yu.; Fischer, U.; Pereslavtsev, P. E.; Blann, M.

2014-04-01

A new approach is proposed for the calculation of non-equilibrium triton energy distributions in nuclear reactions induced by nucleons of intermediate energies. It combines models describing the nucleon pick-up, the coalescence and the triton knock-out processes. Emission and absorption rates for excited particles are represented by the pre-equilibrium hybrid model. The model of Sato, Iwamoto, Harada is used to describe the nucleon pick-up and the coalescence of nucleons from exciton configurations starting from (2p,1h) states. The contribution of the direct nucleon pick-up is described phenomenologically. Multiple pre-equilibrium emission of tritons is accounted for. The calculated triton energy distributions are compared with available experimental data.

Expansion of Countermine Lidar UAV-based System (CLUBS)

DTIC Science & Technology

2011-09-30

analysis with environmental conditions, namely; Ft. Lauderdale, FL, Looe Key, FL, Alpena , MI, and Buttermilk Bay, MA (Figure 2). We adopt a...estimated Dstat Looe Key, FL Ft. Lauderdale, FL Alpena , MI Buttermilk Bay, MA Figure 2. Regions of interests picked for the study to...Lauderdale, FL Alpena , MI Buttermilk Bay, MA Water properties Effective Fresnel reflectivity 0.002 0.0028 0.00144 0.0005 Diffuse

Predicting bunching costs for the Radio Horse 9 winch

Treesearch

Chris B. LeDoux; Bruce W. Kling; Patrice A. Harou; Patrice A. Harou

1987-01-01

Data from field studies and a prebunching cost simulator have been assembled and converted into a general equation that can be used to estimate the prebunching cost of the Radio Horse 9 winch. The methods can be used to estimate prebunching cost for bunching under the skyline corridor for swinging with cable systems, for bunching to skid trail edge to be picked up by a...

Testing Composites

NASA Technical Reports Server (NTRS)

1981-01-01

A device for testing composites for strength characteristics has been developed by Acoustic Emission Technology Corporation. Called the Model 206AU, the system is lightweight and portable. It is comprised of three sections. The "pulser" section injects ultrasonic waves into the material under test. A receiver picks up the simulated stress waves as they pass through the material and relays the signals to the acoustic emission section, where they are electronically analyzed.

Controlling Atomic, Solid-State and Hybrid Systems for Quantum Information Processing

DTIC Science & Technology

2013-09-04

PERFORMING ORGANIZATION NAMES AND ADDRESSES 8. PERFORMING ORGANIZATION REPORT Massachusetts Institute of Technology (MIT NUMBER 77 Massachusetts...for the graphene macro-atom. . . . . . . . . . . . . . 67 4.3 Performance of the graphene based single photon switch. . . . . . . . 68 5.1 All-optical...community of scientists, as well as the occasional pick up basketball, softball , volleyball, hockey and tennis team. Both past and present members have

Real Time System for Practical Acoustic Monitoring of Global Ocean Temperature. Volume 3

DTIC Science & Technology

1994-06-30

signal processing software to the SSAR. This software performs Doppler correction , circulating sums, matched filtering and pulse compression, estimation...Doppler correction , circulating sums, matched filtering and pulse compression, estimation of multipath arrival angle, and peak- picking. At the... geometrica , sound speed, and focuing region sAles to the acoustic wavelengths Our work on this problem is based on an oceanographic application. To

Staying on Track: Testing Higher Achievement's Long-Term Impact on Academic Outcomes and High School Choice

ERIC Educational Resources Information Center

Herrera, Carla; Grossman, Jean Baldwin; Linden, Leigh L.

2013-01-01

One crucial decision that middle schoolers (and their families) make is where they will attend high school. Many districts employ school choice systems designed to allow students to pick a high school that will meet their needs and interests. Yet most students prefer high schools that are close to home, and for youth in low-income neighborhoods,…

Plankton Production Biology

DTIC Science & Technology

2013-09-30

kind. It will permit the study of stage-specific population dynamics (growth rate, production, mortality) of copepod larvae in mixed populations...will be picked up. 4. The translation and distribution of Sazhina’s keys will permit the study of stage-specific population dynamics (growth rate...of the 1987 Russian original, edited by K. Banse) Petipa, T.S. (ed.) (1986) Ecological Systems in Dynamically Active Zones of the Indian Ocean

Lorentz force electrical impedance tomography using magnetic field measurements.

PubMed

Zengin, Reyhan; Gençer, Nevzat Güneri

2016-08-21

In this study, magnetic field measurement technique is investigated to image the electrical conductivity properties of biological tissues using Lorentz forces. This technique is based on electrical current induction using ultrasound together with an applied static magnetic field. The magnetic field intensity generated due to induced currents is measured using two coil configurations, namely, a rectangular loop coil and a novel xy coil pair. A time-varying voltage is picked-up and recorded while the acoustic wave propagates along its path. The forward problem of this imaging modality is defined as calculation of the pick-up voltages due to a given acoustic excitation and known body properties. Firstly, the feasibility of the proposed technique is investigated analytically. The basic field equations governing the behaviour of time-varying electromagnetic fields are presented. Secondly, the general formulation of the partial differential equations for the scalar and magnetic vector potentials are derived. To investigate the feasibility of this technique, numerical studies are conducted using a finite element method based software. To sense the pick-up voltages a novel coil configuration (xy coil pairs) is proposed. Two-dimensional numerical geometry with a 16-element linear phased array (LPA) ultrasonic transducer (1 MHz) and a conductive body (breast fat) with five tumorous tissues is modeled. The static magnetic field is assumed to be 4 Tesla. To understand the performance of the imaging system, the sensitivity matrix is analyzed. The sensitivity matrix is obtained for two different locations of LPA transducer with eleven steering angles from [Formula: see text] to [Formula: see text] at intervals of [Formula: see text]. The characteristics of the imaging system are shown with the singular value decomposition (SVD) of the sensitivity matrix. The images are reconstructed with the truncated SVD algorithm. The signal-to-noise ratio in measurements is assumed 80 dB. Simulation studies based on the sensitivity matrix analysis reveal that perturbations with [Formula: see text] mm size can be detected up to a 3.5 cm depth.

Lorentz force electrical impedance tomography using magnetic field measurements

NASA Astrophysics Data System (ADS)

Zengin, Reyhan; Güneri Gençer, Nevzat

2016-08-01

In this study, magnetic field measurement technique is investigated to image the electrical conductivity properties of biological tissues using Lorentz forces. This technique is based on electrical current induction using ultrasound together with an applied static magnetic field. The magnetic field intensity generated due to induced currents is measured using two coil configurations, namely, a rectangular loop coil and a novel xy coil pair. A time-varying voltage is picked-up and recorded while the acoustic wave propagates along its path. The forward problem of this imaging modality is defined as calculation of the pick-up voltages due to a given acoustic excitation and known body properties. Firstly, the feasibility of the proposed technique is investigated analytically. The basic field equations governing the behaviour of time-varying electromagnetic fields are presented. Secondly, the general formulation of the partial differential equations for the scalar and magnetic vector potentials are derived. To investigate the feasibility of this technique, numerical studies are conducted using a finite element method based software. To sense the pick-up voltages a novel coil configuration (xy coil pairs) is proposed. Two-dimensional numerical geometry with a 16-element linear phased array (LPA) ultrasonic transducer (1 MHz) and a conductive body (breast fat) with five tumorous tissues is modeled. The static magnetic field is assumed to be 4 Tesla. To understand the performance of the imaging system, the sensitivity matrix is analyzed. The sensitivity matrix is obtained for two different locations of LPA transducer with eleven steering angles from -{{25}\\circ} to {{25}\\circ} at intervals of {{5}\\circ} . The characteristics of the imaging system are shown with the singular value decomposition (SVD) of the sensitivity matrix. The images are reconstructed with the truncated SVD algorithm. The signal-to-noise ratio in measurements is assumed 80 dB. Simulation studies based on the sensitivity matrix analysis reveal that perturbations with 5~\\text{mm}× 5 mm size can be detected up to a 3.5 cm depth.

PWL 1.0 Personal WaveLab: an object-oriented workbench for seismogram analysis on Windows systems

NASA Astrophysics Data System (ADS)

Bono, Andrea; Badiali, Lucio

2005-02-01

Personal WaveLab 1.0 wants to be the starting point for an ex novo development of seismic time-series analysis procedures for Windows-based personal computers. Our objective is two-fold. Firstly, being itself a stand-alone application, it allows to do "basic" digital or digitised seismic waveform analysis. Secondly, thanks to its architectural characteristics it can be the basis for the development of more complex and power featured applications. An expanded version of PWL, called SisPick!, is currently in use at the Istituto Nazionale di Geofisica e Vulcanologia (Italian Institute of Geophysics and Volcanology) for real-time monitoring with purposes of Civil Protection. This means that about 90 users tested the application for more than 1 year, making its features more robust and efficient. SisPick! was also employed in the United Nations Nyragongo Project, in Congo, and during the Stromboli emergency in summer of 2002. The main appeals of the application package are: ease of use, object-oriented design, good computational speed, minimal need of disk space and the complete absence of third-party developed components (including ActiveX). Windows environment spares the user scripting or complex interaction with the system. The system is in constant development to answer the needs and suggestions of its users. Microsoft Visual Basic 6 source code, installation package, test data sets and documentation are available at no cost.

Development and use of a spherical microphone array for measurement of spatial properties of reverberant sound fields

NASA Astrophysics Data System (ADS)

Gover, Bradford Noel

The problem of hands-free speech pick-up is introduced, and it is identified how details of the spatial properties of the reverberant field may be useful for enhanced design of microphone arrays. From this motivation, a broadly-applicable measurement system has been developed for the analysis of the directional and spatial variations in reverberant sound fields. Two spherical, 32-element arrays of microphones are used to generate narrow beams over two different frequency ranges, together covering 300--3300 Hz. Using an omnidirectional loudspeaker as excitation in a room, the pressure impulse response in each of 60 steering directions is measured. Through analysis of these responses, the variation of arriving energy with direction is studied. The system was first validated in simple sound fields in an anechoic chamber and in a reverberation chamber. The system characterizes these sound fields as expected, both quantitatively through numerical descriptors and qualitatively from plots of the arriving energy versus direction. The system was then used to measure the sound fields in several actual rooms. Through both qualitative and quantitative output, these sound fields were seen to be highly anisotropic, influenced greatly by the direct sound and early-arriving reflections. Furthermore, the rate of sound decay was not independent of direction, sound being absorbed more rapidly in some directions than in others. These results are discussed in the context of the original motivation, and methods for their application to enhanced speech pick-up using microphone arrays are proposed.

Pickup Ion Signatures in the Vicinity of Titan

NASA Astrophysics Data System (ADS)

Regoli, L.; Coates, A. J.; Feyerabend, M.; Roussos, E.; Jones, G. H.; Krupp, N.; Thomsen, M. F.

2015-12-01

Being the only moon in the solar system with a significant atmosphere, Titan possesses an ionosphere that acts as a conducting obstacle to the incoming plasma from Saturn's magnetosphere. This creates a mass-loading of the magnetic field lines with freshly picked up ions from Titan's atmosphere on a process similar to that observed in comets (e.g. Coates et al. (1993), Journal of Geophysical Research, Vol. 98, No. A12, 20985-20994) and other moons like Jupiter's Io (e.g. Russell et al. (2003), Planetary and Space Science, Vol. 51, 233-238). However, while at other celestial bodies ion cyclotron waves arise as one of the main signatures of this process, this is not the case at Titan, with e.g. Cowee et al. (2010) (Journal of Geophysical Research, Vol. 115, A10224) attributing this to the local orientation of the magnetic field and the plasma flow preventing the waves to grow to levels detectable by the instruments on-board Cassini. For the reason above, the detection of pickup ions signatures needs to be approached through other methods. For this study, we analyze data from the CAPS/IMS instrument on-board Cassini. IMS is an ion mass spectrometer capable of detecting ion fluxes with energies from 1 eV to 50 keV with an atomic resolution of M/ΔM ~ 70. During many of the dedicated Titan flybys by Cassini, IMS was able to distinguish between ions of magnetospheric origin and of ionospheric origin, the latter being freshly picked up ions from Titan's ionosphere. With the help of ion spectrograms and time of flight (TOF) information, we carried out a survey of all the flybys for which IMS has data (the CAPS instrument was switched off after the 83th. dedicated flyby, named in the project as T83) in order to obtain information about the location and frequency of occurence for the signatures.

Microseismic event location by master-event waveform stacking

NASA Astrophysics Data System (ADS)

Grigoli, F.; Cesca, S.; Dahm, T.

2016-12-01

Waveform stacking location methods are nowadays extensively used to monitor induced seismicity monitoring assoiciated with several underground industrial activities such as Mining, Oil&Gas production and Geothermal energy exploitation. In the last decade a significant effort has been spent to develop or improve methodologies able to perform automated seismological analysis for weak events at a local scale. This effort was accompanied by the improvement of monitoring systems, resulting in an increasing number of large microseismicity catalogs. The analysis of microseismicity is challenging, because of the large number of recorded events often characterized by a low signal-to-noise ratio. A significant limitation of the traditional location approaches is that automated picking is often done on each seismogram individually, making little or no use of the coherency information between stations. In order to improve the performance of the traditional location methods, in the last year, alternative approaches have been proposed. These methods exploits the coherence of the waveforms recorded at different stations and do not require any automated picking procedure. The main advantage of this methods relies on their robustness even when the recorded waveforms are very noisy. On the other hand, like any other location method, the location performance strongly depends on the accuracy of the available velocity model. When dealing with inaccurate velocity models, in fact, location results can be affected by large errors. Here we will introduce a new automated waveform stacking location method which is less dependent on the knowledge of the velocity model and presents several benefits, which improve the location accuracy: 1) it accounts for phase delays due to local site effects, e.g. surface topography or variable sediment thickness 2) theoretical velocity model are only used to estimate travel times within the source volume, and not along the whole source-sensor path. We finally compare the location results for both synthetics and real data with those obtained by using classical waveforms stacking approaches.