Action Experience Changes Attention to Kinematic Cues

PubMed Central

Filippi, Courtney A.; Woodward, Amanda L.

2016-01-01

The current study used remote corneal reflection eye-tracking to examine the relationship between motor experience and action anticipation in 13-months-old infants. To measure online anticipation of actions infants watched videos where the actor’s hand provided kinematic information (in its orientation) about the type of object that the actor was going to reach for. The actor’s hand orientation either matched the orientation of a rod (congruent cue) or did not match the orientation of the rod (incongruent cue). To examine relations between motor experience and action anticipation, we used a 2 (reach first vs. observe first) × 2 (congruent kinematic cue vs. incongruent kinematic cue) between-subjects design. We show that 13-months-old infants in the observe first condition spontaneously generate rapid online visual predictions to congruent hand orientation cues and do not visually anticipate when presented incongruent cues. We further demonstrate that the speed that these infants generate predictions to congruent motor cues is correlated with their own ability to pre-shape their hands. Finally, we demonstrate that following reaching experience, infants generate rapid predictions to both congruent and incongruent hand shape cues—suggesting that short-term experience changes attention to kinematics. PMID:26913012

Effect of task-oriented activities on hand functions, cognitive functions and self-expression of elderly patients with dementia.

PubMed

Son, Bo-Young; Bang, Yo-Soon; Hwang, Min-Ji; Oh, Eun-Ju

2017-08-01

[Purpose] This study investigates the effects of task-oriented activities on hand function, cognitive function, and self-expression of the elderly with dementia, and then identify the influencing factors on self-expression in sub-factors of dependent variables. [Subjects and Methods] Forty elderly persons were divided into two groups: intervention group (n=20) and control group (n=20). The interventions were applied to the subjects 3 times a week, 50 minutes per each time, for a total of five weeks. We measured the jamar hand dynamometer test for grip strength, the jamar hydraulic pinch gauge test for prehension test, nine-hole pegboard test for coordination test, and Loewenstein Occupational Therapy Cognitive Assessment-Geriatric Population for cognitive function, and self-expression rating scale for self-expression test. [Results] The task-oriented activities promoted hand function, cognitive function (visual perception, spatial perception, visuomotor organization, attention & concentration) and self-expression of the elderly with early dementia, and the factors influencing the self-expression were cognitive function (visual perception) and hand function (coordination). The study showed that the task-oriented program enabled self-expression by improving hand function and cognitive function. [Conclusion] This study suggested that there should be provided the task-oriented program for prevention and treatment of the elderly with early dementia in the clinical settings and it was considered that results have a value as basic data that can be verified relationship of hand function, cognitive function, and self-expression.

Effect of task-oriented activities on hand functions, cognitive functions and self-expression of elderly patients with dementia

PubMed Central

Son, Bo-Young; Bang, Yo-Soon; Hwang, Min-Ji; Oh, Eun-Ju

2017-01-01

[Purpose] This study investigates the effects of task-oriented activities on hand function, cognitive function, and self-expression of the elderly with dementia, and then identify the influencing factors on self-expression in sub-factors of dependent variables. [Subjects and Methods] Forty elderly persons were divided into two groups: intervention group (n=20) and control group (n=20). The interventions were applied to the subjects 3 times a week, 50 minutes per each time, for a total of five weeks. We measured the jamar hand dynamometer test for grip strength, the jamar hydraulic pinch gauge test for prehension test, nine-hole pegboard test for coordination test, and Loewenstein Occupational Therapy Cognitive Assessment-Geriatric Population for cognitive function, and self-expression rating scale for self-expression test. [Results] The task-oriented activities promoted hand function, cognitive function (visual perception, spatial perception, visuomotor organization, attention & concentration) and self-expression of the elderly with early dementia, and the factors influencing the self-expression were cognitive function (visual perception) and hand function (coordination). The study showed that the task-oriented program enabled self-expression by improving hand function and cognitive function. [Conclusion] This study suggested that there should be provided the task-oriented program for prevention and treatment of the elderly with early dementia in the clinical settings and it was considered that results have a value as basic data that can be verified relationship of hand function, cognitive function, and self-expression. PMID:28878462

Low emotion-oriented coping and informal help-seeking behaviour as major predictive factors for improvement in major depression at 5-year follow-up in the adult community.

PubMed

Rodgers, S; Vandeleur, C L; Strippoli, M-P F; Castelao, E; Tesic, A; Glaus, J; Lasserre, A M; Müller, M; Rössler, W; Ajdacic-Gross, V; Preisig, M

2017-09-01

Given the broad range of biopsychosocial difficulties resulting from major depressive disorder (MDD), reliable evidence for predictors of improved mental health is essential, particularly from unbiased prospective community samples. Consequently, a broad spectrum of potential clinical and non-clinical predictors of improved mental health, defined as an absence of current major depressive episode (MDE) at follow-up, were examined over a 5-year period in an adult community sample. The longitudinal population-based PsyCoLaus study from the city of Lausanne, Switzerland, was used. Subjects having a lifetime MDD with a current MDE at baseline assessment were selected, resulting in a subsample of 210 subjects. Logistic regressions were applied to the data. Coping styles were the most important predictive factors in the present study. More specifically, low emotion-oriented coping and informal help-seeking behaviour at baseline were associated with the absence of an MDD diagnosis at follow-up. Surprisingly, neither formal help-seeking behaviour, nor psychopharmacological treatment, nor childhood adversities, nor depression subtypes turned out to be relevant predictors in the current study. The paramount role of coping styles as predictors of improvement in depression found in the present study might be a valuable target for resource-oriented therapeutic models. On the one hand, the positive impact of low emotion-oriented coping highlights the utility of clinical interventions interrupting excessive mental ruminations during MDE. On the other hand, the importance of informal social networks raises questions regarding how to enlarge the personal network of affected subjects and on how to best support informal caregivers.

Evidence for a Hematite Ore Body on Mars

NASA Technical Reports Server (NTRS)

Morris, Richard V.; Lane, M. D.; Christensen, P. R.

2000-01-01

The Mars Global Surveyor (MGS) spacecraft was launched from Cape Kennedy in November 1996. MGS was put into orbit around Mars in September of 1997 and has since been sending back data from a suite of instruments, including the Thermal Emission Spectrometer (TES). The TES instrument is an interferometric spectrometer designed to map the surface mineralogy of Mars by measuring the midinfrared emitted radiation over the spectral region of about 1600 to 200 cm(exp -1) (about 6 to 50 microns). This mineralogically sensitive technique utilizes the characteristic intra- and inter-molecular vibrations of minerals that are manifested in the midinfrared spectra. These spectral "fingerprints" are unique because they are dependent upon chemical composition, crystal structure, crystal orientation, and other factors. Midinfrared spectral data received from the MGS-TES instrument have indicated the presence of a large deposit of hematite (alpha-Fe2O3) in Sinus Meridiani, Mars. This hematite ore body, that is accompanied by basalt, is really extensive, encompassing an area about 350 by 500 km. To better understand the geologic context of this large deposit, a detailed laboratory spectroscopic investigation was conducted using more than 20 hematite samples so that their spectra could be compared to the martian spectra. The samples included red and gray polycrystaline hand samples, gray single-crystal hand samples, and red and gray fine- and coarse-grained particulates. The laboratory analyses provided thermal emissivity spectra that, when compared to the hematite emissivity spectra from Mars, suggest the Sinus Meridiani hematite is possibly an exposure of oriented hematite grains. These grains are likely coarser that 10 microns (and may be much larger) and gray in color. The characteristic of oriented grains is suggested by the apparent crystal axis-dependence of the energy emitted from the surface of Mars. The strong degree of crystal alignment exhibited in the emissivity spectra of Mars suggests that these oriented hematite crystals most likely occur as bedrock of aligned specular hematite grains (possibly schistose in texture) or as a secondary coating on bedrock, rather than as discrete particles. We are investigating the nature of this vast hematite deposit in order to understand better the geologic setting and infer past conditions and geological evolution on Mars.

Evidence for a Hematite Ore Body on Mars

NASA Technical Reports Server (NTRS)

Lane, M. D.; Christensen, P. R.

2000-01-01

The Mars Global Surveyor (MGS) spacecraft was launched from Cape Kennedy in November 1996. MGS was put into orbit around Mars in September of 1997 and has since been sending back data from a suite of instruments, including the Thermal Emission Spectrometer (TES). The TES instrument is an interferometric spectrometer designed to map the surface mineralogy of Mars by measuring the midinfrared emitted radiation over the spectral region of approximately 1600 to 200 per centimeter (appjroximately 6 to 50 microns). This mineralogically sensitive technique utilizes the characteristic intra- and inter-molecular vibrations of minerals that are manifested in the midinfrared spectra. These spectral "fingerprints" are unique because they are dependent upon chemical composition, crystal structure, crystal orientation, and other factors. Midinfrared spectral data received from the MGS-TES instrument have indicated the presence of a large deposit of hematite (alpha-Fe2O3) in Sinus Meridiani, Mars. This hematite ore body, that is accompanied by basalt, is areally extensive, encompassing and area approximately 350 by 500 km. To better understand the geologic context of this large deposit, a detailed laboratory spectroscopic investigation was conducted using more than 20 hematite samples so that their spectra could be compared to the martian spectra. The samples included red and gray polycrystaline hand samples, gray single-crystal hand samples, and red and gray fine- and coarse-grained particulates. The laboratory analyses provided thermal emissivity spectra that, when compared to the hematite emissivity spectra from Mars, suggest the Sinus Meridiani hematite is possibly an exposure of oriented hematite grains. These grains are likely coarser that 10 microns (and may be much larger) and gray in color The characteristic of oriented grains is suggested by the apparent crystal axis-dependence of the energy emitted from the surface of Mars. The strong degree of crystal alignment exhibited in the emissivity spectra of Mars suggests that these oriented hematite crystals most likely occur as bedrock of aligned specular hematite grains (possibly schistose in texture) or as a secondary coating on bedrock, rather than as discrete particles. We are investigating the nature of this vast hematite deposit in order to understand better the geologic setting and infer past conditions and geological evolution on Mars.

Reducing the motor response in haptic parallel matching eliminates the typically observed gender difference.

PubMed

van Mier, Hanneke I

2016-01-01

When making two bars haptically parallel to each other, large deviations have been observed, most likely caused by the bias of a hand-centered egocentric reference frame. A consistent finding is that women show significantly larger deviations than men when performing this task. It has been suggested that this difference might be due to the fact that women are more egocentrically oriented than men or are less efficient in overcoming the egocentric bias of the hand. If this is indeed the case, reducing the bias of the egocentric reference frame should eliminate the above-mentioned gender difference. This was investigated in the current study. Sixty participants (30 men, 30 women) were instructed to haptically match (task HP) the orientation of a test bar with the dominant hand to the orientation of a reference bar that was perceived with the non-dominant hand. In a haptic visual task (task HV), in which only the reference bar and exploring hand were out of view, no motor response was required, but participants had to "match" the perceived orientation by verbally naming the parallel orientation that was read out on a test protractor. Both females and males performed better in the HV task than in the HP task. Significant gender effects were only found in the haptic parallelity task (HP), corroborating the idea that women perform at the same level as men when the egocentric bias of the hand is reduced.

Re-calibration of the magnetic compass in hand-raised European robins (Erithacus rubecula)

PubMed Central

Alert, Bianca; Michalik, Andreas; Thiele, Nadine; Bottesch, Michael; Mouritsen, Henrik

2015-01-01

Migratory birds can use a variety of environmental cues for orientation. A primary calibration between the celestial and magnetic compasses seems to be fundamental prior to a bird’s first autumn migration. Releasing hand-raised or rescued young birds back into the wild might therefore be a problem because they might not have established a functional orientation system during their first calendar year. Here, we test whether hand-raised European robins that did not develop any functional compass before or during their first autumn migration could relearn to orient if they were exposed to natural celestial cues during the subsequent winter and spring. When tested in the geomagnetic field without access to celestial cues, these birds could orient in their species-specific spring migratory direction. In contrast, control birds that were deprived of any natural celestial cues throughout remained unable to orient. Our experiments suggest that European robins are still capable of establishing a functional orientation system after their first autumn. Although the external reference remains speculative, most likely, natural celestial cues enabled our birds to calibrate their magnetic compass. Our data suggest that avian compass systems are more flexible than previously believed and have implications for the release of hand-reared migratory birds. PMID:26388258

Effects of task-oriented robot training on arm function, activity, and quality of life in chronic stroke patients: a randomized controlled trial.

PubMed

Timmermans, Annick A A; Lemmens, Ryanne J M; Monfrance, Maurice; Geers, Richard P J; Bakx, Wilbert; Smeets, Rob J E M; Seelen, Henk A M

2014-03-31

Over fifty percent of stroke patients experience chronic arm hand performance problems, compromising independence in daily life activities and quality of life. Task-oriented training may improve arm hand performance after stroke, whereby augmented therapy may lead to a better treatment outcome. Technology-supported training holds opportunities for increasing training intensity. However, the effects of robot-supported task-oriented training with real life objects in stroke patients are not known to date. The aim of the present study was to investigate the effectiveness and added value of the Haptic Master robot combined with task-oriented arm hand training in chronic stroke patients. In a single-blind randomized controlled trial, 22 chronic stroke patients were randomly allocated to receive either task-oriented robot-assisted arm-hand training (experimental group) or task-oriented non-robotic arm-hand training (control group). For training, the T-TOAT (Technology-supported Task-Oriented Arm Training) method was applied. Training was provided during 8 weeks, 4 times/week, 2 × 30 min/day. A significant improvement after training on the Action Research Arm Test (ARAT) was demonstrated in the experimental group (p = 0.008). Results were maintained until 6 months after cessation of the training. On the perceived performance measure (Motor Activity Log (MAL)), both, the experimental and control group improved significantly after training (control group p = 0.008; experimental group p = 0.013). The improvements on MAL in both groups were maintained until 6 months after cessation of the training. With regard to quality of life, only in the control group a significant improvement after training was found (EuroQol-5D p = 0.015, SF-36 physical p = 0.01). However, the improvement on SF-36 in the control group was not maintained (p = 0.012). No between-group differences could be demonstrated on any of the outcome measures. Arm hand performance improved in chronic stroke patients, after eight weeks of task oriented training. The use of a Haptic Master robot in support of task-oriented arm training did not show additional value over the video-instructed task-oriented exercises in highly functional stroke patients. Current Controlled Trials ISRCTN82787126.

A Novel Phonology- and Radical-Coded Chinese Sign Language Recognition Framework Using Accelerometer and Surface Electromyography Sensors

PubMed Central

Cheng, Juan; Chen, Xun; Liu, Aiping; Peng, Hu

2015-01-01

Sign language recognition (SLR) is an important communication tool between the deaf and the external world. It is highly necessary to develop a worldwide continuous and large-vocabulary-scale SLR system for practical usage. In this paper, we propose a novel phonology- and radical-coded Chinese SLR framework to demonstrate the feasibility of continuous SLR using accelerometer (ACC) and surface electromyography (sEMG) sensors. The continuous Chinese characters, consisting of coded sign gestures, are first segmented into active segments using EMG signals by means of moving average algorithm. Then, features of each component are extracted from both ACC and sEMG signals of active segments (i.e., palm orientation represented by the mean and variance of ACC signals, hand movement represented by the fixed-point ACC sequence, and hand shape represented by both the mean absolute value (MAV) and autoregressive model coefficients (ARs)). Afterwards, palm orientation is first classified, distinguishing “Palm Downward” sign gestures from “Palm Inward” ones. Only the “Palm Inward” gestures are sent for further hand movement and hand shape recognition by dynamic time warping (DTW) algorithm and hidden Markov models (HMM) respectively. Finally, component recognition results are integrated to identify one certain coded gesture. Experimental results demonstrate that the proposed SLR framework with a vocabulary scale of 223 characters can achieve an averaged recognition accuracy of 96.01% ± 0.83% for coded gesture recognition tasks and 92.73% ± 1.47% for character recognition tasks. Besides, it demonstrats that sEMG signals are rather consistent for a given hand shape independent of hand movements. Hence, the number of training samples will not be significantly increased when the vocabulary scale increases, since not only the number of the completely new proposed coded gestures is constant and limited, but also the transition movement which connects successive signs needs no training samples to model even though the same coded gesture performed in different characters. This work opens up a possible new way to realize a practical Chinese SLR system. PMID:26389907

A Novel Phonology- and Radical-Coded Chinese Sign Language Recognition Framework Using Accelerometer and Surface Electromyography Sensors.

PubMed

Cheng, Juan; Chen, Xun; Liu, Aiping; Peng, Hu

2015-09-15

Sign language recognition (SLR) is an important communication tool between the deaf and the external world. It is highly necessary to develop a worldwide continuous and large-vocabulary-scale SLR system for practical usage. In this paper, we propose a novel phonology- and radical-coded Chinese SLR framework to demonstrate the feasibility of continuous SLR using accelerometer (ACC) and surface electromyography (sEMG) sensors. The continuous Chinese characters, consisting of coded sign gestures, are first segmented into active segments using EMG signals by means of moving average algorithm. Then, features of each component are extracted from both ACC and sEMG signals of active segments (i.e., palm orientation represented by the mean and variance of ACC signals, hand movement represented by the fixed-point ACC sequence, and hand shape represented by both the mean absolute value (MAV) and autoregressive model coefficients (ARs)). Afterwards, palm orientation is first classified, distinguishing "Palm Downward" sign gestures from "Palm Inward" ones. Only the "Palm Inward" gestures are sent for further hand movement and hand shape recognition by dynamic time warping (DTW) algorithm and hidden Markov models (HMM) respectively. Finally, component recognition results are integrated to identify one certain coded gesture. Experimental results demonstrate that the proposed SLR framework with a vocabulary scale of 223 characters can achieve an averaged recognition accuracy of 96.01% ± 0.83% for coded gesture recognition tasks and 92.73% ± 1.47% for character recognition tasks. Besides, it demonstrats that sEMG signals are rather consistent for a given hand shape independent of hand movements. Hence, the number of training samples will not be significantly increased when the vocabulary scale increases, since not only the number of the completely new proposed coded gestures is constant and limited, but also the transition movement which connects successive signs needs no training samples to model even though the same coded gesture performed in different characters. This work opens up a possible new way to realize a practical Chinese SLR system.

Sequencing bilateral and unilateral task-oriented training versus task oriented training alone to improve arm function in individuals with chronic stroke.

PubMed

McCombe Waller, Sandy; Whitall, Jill; Jenkins, Toye; Magder, Laurence S; Hanley, Daniel F; Goldberg, Andrew; Luft, Andreas R

2014-12-14

Recovering useful hand function after stroke is a major scientific challenge for patients with limited motor recovery. We hypothesized that sequential training beginning with proximal bilateral followed by unilateral task oriented training is superior to time-matched unilateral training alone. Proximal bilateral training could optimally prepare the motor system to respond to the more challenging task-oriented training. Twenty-six participants with moderate severity hemiparesis Intervention: PARTICIPANTS received either 6-weeks of bilateral proximal training followed sequentially by 6-weeks unilateral task-oriented training (COMBO) or 12-weeks of unilateral task-oriented training alone (SAEBO). A subset of 8 COMB0 and 9 SAEBO participants underwent three functional magnetic resonance imaging (fMRI) scans of hand and elbow movement every 6 weeks. Fugl-Meyer Upper extremity scale, Modified Wolf Motor Function Test, University of Maryland Arm Questionnaire for Stroke, Motor cortex activation (fMRI). The COMBO group demonstrated significantly greater gains between baseline and 12-weeks over all outcome measures (p = .018 based on a MANOVA test) and specifically in the Modified Wolf Motor Function test (time). Both groups demonstrated within-group gains on the Fugl-Meyer Upper Extremity test (impairment) and University of Maryland Arm Questionnaire for Stroke (functional use). fMRI subset analyses showed motor cortex (primary and premotor) activation during hand movement was significantly increased by sequential combination training but not by task-oriented training alone. Sequentially combining a proximal bilateral before a unilateral task-oriented training may be an effective way to facilitate gains in arm and hand function in those with moderate to severe paresis post-stroke compared to unilateral task oriented training alone.

Job Knowledge Test Design: A Cognitively-Oriented Approach

DTIC Science & Technology

1993-07-01

protocol analyses and related methods. We employed a plan-goal graph representation to capture the knowledge content and goal structure of the studied task...between job knowledge and hands-on performance from previous studies was .38. For the subset of Marines in this sample who had recently been examined...the job knowledge test provided similar results to conventional, total number correct scoring. Conclusion The evidence provided by this study supports

Motor Experience Influences Object Knowledge

PubMed Central

Chrysikou, Evangelia G.; Casasanto, Daniel; Thompson-Schill, Sharon L.

2016-01-01

An object’s perceived readiness-for-action (e.g., its size, the degree of rotation from its canonical position, or the user’s viewpoint) can influence semantic knowledge retrieval. Yet, the organization of object knowledge may also be affected by body-specific sensorimotor experiences. Here, we investigated whether people’s history of performing motor actions with their hands influences the knowledge they store and retrieve about graspable objects. We compared object representations between healthy right- and left-handers (Experiment 1), and between unilateral stroke patients, whose motor experience was changed by impairment of either their right or left hand (Experiment 2). Participants saw pictures of graspable everyday items with the handles oriented toward either the left or right hand, and they generated the type of grasp they would employ (i.e., clench or pinch) when using each object, responding orally. In both experiments, hand dominance and object orientation interacted to predict response times. In Experiment 1, judgments were fastest when objects were oriented toward the right hand in right-handers, but not in left-handers. In Experiment 2, judgments were fastest when objects were oriented toward the left hand in patients who had lost the use of their right hand, even though these patients were right-handed prior to brain injury. Results suggest that at least some aspects of object knowledge are determined by motor experience, and can be changed by new patterns of motor experience. People with different bodily characteristics, who interact with objects in systematically different ways, form correspondingly different neurocognitive representations of the same common objects. PMID:28253009

Motor experience influences object knowledge.

PubMed

Chrysikou, Evangelia G; Casasanto, Daniel; Thompson-Schill, Sharon L

2017-03-01

An object's perceived readiness-for-action (e.g., its size, the degree of rotation from its canonical position, the user's viewpoint) can influence semantic knowledge retrieval. Yet, the organization of object knowledge may also be affected by body-specific sensorimotor experiences. Here, we investigated whether people's history of performing motor actions with their hands influences the knowledge they store and retrieve about graspable objects. We compared object representations between healthy right- and left-handers (Experiment 1), and between unilateral stroke patients, whose motor experience was changed by impairment of either their right or left hand (Experiment 2). Participants saw pictures of graspable everyday items with the handles oriented toward either the left or right hand, and they generated the type of grasp they would employ (i.e., clench or pinch) when using each object, responding orally. In both experiments, hand dominance and object orientation interacted to predict response times. In Experiment 1, judgments were fastest when objects were oriented toward the right hand in right-handers, but not in left-handers. In Experiment 2, judgments were fastest when objects were oriented toward the left hand in patients who had lost the use of their right hand, even though these patients were right-handed prior to brain injury. Results suggest that at least some aspects of object knowledge are determined by motor experience, and can be changed by new patterns of motor experience. People with different bodily characteristics, who interact with objects in systematically different ways, form correspondingly different neurocognitive representations of the same common objects. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Task-oriented training with computer gaming in people with rheumatoid arthritisor osteoarthritis of the hand: study protocol of a randomized controlled pilot trial.

PubMed

Srikesavan, Cynthia Swarnalatha; Shay, Barbara; Robinson, David B; Szturm, Tony

2013-03-09

Significant restriction in the ability to participate in home, work and community life results from pain, fatigue, joint damage, stiffness and reduced joint range of motion and muscle strength in people with rheumatoid arthritis or osteoarthritis of the hand. With modest evidence on the therapeutic effectiveness of conventional hand exercises, a task-oriented training program via real life object manipulations has been developed for people with arthritis. An innovative, computer-based gaming platform that allows a broad range of common objects to be seamlessly transformed into therapeutic input devices through instrumentation with a motion-sense mouse has also been designed. Personalized objects are selected to target specific training goals such as graded finger mobility, strength, endurance or fine/gross dexterous functions. The movements and object manipulation tasks that replicate common situations in everyday living will then be used to control and play any computer game, making practice challenging and engaging. The ongoing study is a 6-week, single-center, parallel-group, equally allocated and assessor-blinded pilot randomized controlled trial. Thirty people with rheumatoid arthritis or osteoarthritis affecting the hand will be randomized to receive either conventional hand exercises or the task-oriented training. The purpose is to determine a preliminary estimation of therapeutic effectiveness and feasibility of the task-oriented training program. Performance based and self-reported hand function, and exercise compliance are the study outcomes. Changes in outcomes (pre to post intervention) within each group will be assessed by paired Student t test or Wilcoxon signed-rank test and between groups (control versus experimental) post intervention using unpaired Student t test or Mann-Whitney U test. The study findings will inform decisions on the feasibility, safety and completion rate and will also provide preliminary data on the treatment effects of the task-oriented training compared with conventional hand exercises in people with rheumatoid arthritis or osteoarthritis of the hand. ClinicalTrials.gov: NCT01635582.

Ti Alloys Processed By Selective Laser Melting And By Laser Cladding: Microstructures And Mechanical Properties

NASA Astrophysics Data System (ADS)

Mertens, Anne; Contrepois, Quentin; Dormal, Thierry; Lemaire, Olivier; Lecomte-Beckers, Jacqueline

2012-07-01

In this study, samples of alloy Ti-6Al-4V have been processed by Selective Laser Melting (SLM) and by Laser Cladding (LC), two layer-by-layer near-net-shape processes allowing for economic production of complex parts. The resulting microstructures have been characterised in details, so as to allow for a better understanding of the solidification process and of the subsequent phase transformations taking place upon cooling for both techniques. On the one hand, a new “MesoClad” laser with a maximum power of 300 W has been used successfully to produce thin wall samples by LC. On the other hand, the influence of processing parameters on the mechanical properties was investigated by means of uniaxial tensile testing performed on samples produced by SLM with different orientations with respect to the direction of mechanical solicitation. A strong anisotropy in mechanical behaviour was thus interpreted in relations with the microstructures and processing conditions.

Hand Pose Estimation by Fusion of Inertial and Magnetic Sensing Aided by a Permanent Magnet.

PubMed

Kortier, Henk G; Antonsson, Jacob; Schepers, H Martin; Gustafsson, Fredrik; Veltink, Peter H

2015-09-01

Tracking human body motions using inertial sensors has become a well-accepted method in ambulatory applications since the subject is not confined to a lab-bounded volume. However, a major drawback is the inability to estimate relative body positions over time because inertial sensor information only allows position tracking through strapdown integration, but does not provide any information about relative positions. In addition, strapdown integration inherently results in drift of the estimated position over time. We propose a novel method in which a permanent magnet combined with 3-D magnetometers and 3-D inertial sensors are used to estimate the global trunk orientation and relative pose of the hand with respect to the trunk. An Extended Kalman Filter is presented to fuse estimates obtained from inertial sensors with magnetic updates such that the position and orientation between the human hand and trunk as well as the global trunk orientation can be estimated robustly. This has been demonstrated in multiple experiments in which various hand tasks were performed. The most complex task in which simultaneous movements of both trunk and hand were performed resulted in an average rms position difference with an optical reference system of 19.7±2.2 mm whereas the relative trunk-hand and global trunk orientation error was 2.3±0.9 and 8.6±8.7 deg respectively.

Sampling methods in archaeomagnetic dating: A comparison using case studies from Wörterberg, Eisenerz and Gams Valley (Austria)

NASA Astrophysics Data System (ADS)

Trapanese, A.; Batt, C. M.; Schnepp, E.

The aim of this research was to review the relative merits of different methods of taking samples for archaeomagnetic dating. To allow different methods to be investigated, two archaeological structures and one modern fireplace were sampled in Austria. On each structure a variety of sampling methods were used: the tube and disc techniques of Clark et al. (Clark, A.J., Tarling, D.H., Noel, M., 1988. Developments in archaeomagnetic dating in Great Britain. Journal of Archaeological Science 15, 645-667), the drill core technique, the mould plastered hand block method of Thellier, and a modification of it. All samples were oriented with a magnetic compass and sun compass, where weather conditions allowed. Approximately 12 discs, tubes, drill cores or plaster hand blocks were collected from each structure, with one mould plaster hand block being collected and cut into specimens. The natural remanent magnetisation (NRM) of the samples was measured and stepwise alternating field (AF) or thermal demagnetisation was applied. Samples were measured either in the UK or in Austria, which allowed the comparison of results between magnetometers with different sensitivity. The tubes and plastered hand block specimens showed good agreement in directional results, and the samples obtained showed good stability. The discs proved to be unreliable as both NRM and the characteristic remanent magnetisation (ChRM) distribution were very scattered. The failure of some methods may be related to the suitability of the material sampled, for example if it was disturbed before sampling, had been insufficiently heated or did not contain appropriate magnetic minerals to retain a remanent magnetisation. Caution is also recommended for laboratory procedures as the cutting of poorly consolidated specimens may disturb the material and therefore the remanent magnetisation. Criteria and guidelines were established to aid researchers in selecting the most appropriate method for a particular archaeological structure.

A high-damping magnetorheological elastomer with bi-directional magnetic-control modulus for potential application in seismology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yu, Miao, E-mail: yumiao@cqu.edu.cn; Qi, Song; Fu, Jie

A high-damping magnetorheological elastomer (MRE) with bi-directional magnetic-control modulus is developed. This MRE was synthesized by filling NdFeB particles into polyurethane (PU)/ epoxy (EP) interpenetrating network (IPN) structure. The anisotropic samples were prepared in a permanent magnetic field and magnetized in an electromagnetic field of 1 T. Dynamic mechanical responses of the MRE to applied magnetic fields are investigated through magneto-rheometer, and morphology of MREs is observed via scanning electron microscope (SEM). Test result indicates that when the test field orientation is parallel to that of the sample's magnetization, the shear modulus of sample increases. On the other hand, when themore » orientation is opposite to that of the sample's magnetization, shear modulus decreases. In addition, this PU/EP IPN matrix based MRE has a high-damping property, with high loss factor and can be controlled by applying magnetic field. It is expected that the high damping property and the ability of bi-directional magnetic-control modulus of this MRE offer promising advantages in seismologic application.« less

Fraternal Birth Order and Extreme Right-Handedness as Predictors of Sexual Orientation and Gender Nonconformity in Men.

PubMed

Kishida, Mariana; Rahman, Qazi

2015-07-01

The present study explored whether there were relationships between number of older brothers, handedness, recalled childhood gender nonconformity (CGN), and sexual orientation in men. We used data from previous British studies conducted in our laboratory (N = 1,011 heterosexual men and 921 gay men). These men had completed measures of demographic variables, number and sex of siblings, CGN, and the Edinburgh Handedness Inventory. The results did not replicate the fraternal birth order effect. However, gay men had fewer "other siblings" than heterosexual men (even after controlling for the stopping-rule and family size). In a sub-sample (425 gay men and 478 heterosexual men) with data available on both sibling sex composition and handedness scores, gay men were found to show a significantly greater likelihood of extreme right-handedness and non-right-handedness compared to heterosexual men. There were no significant effects of sibling sex composition in this sub-sample. In a further sub-sample (N = 487) with data available on sibling sex composition, handedness, and CGN, we found that men with feminine scores on CGN were more extremely right-handed and had fewer other-siblings compared to masculine scoring men. Mediation analysis revealed that handedness was associated with sexual orientation directly and also indirectly through the mediating factor of CGN. We were unable to replicate the fraternal birth order effect in our archived dataset but there was evidence for a relationship among handedness, sexual orientation, and CGN. These data help narrow down the number of possible neurodevelopmental pathways leading to variations in male sexual orientation.

Hand Matters: Left-Hand Gestures Enhance Metaphor Explanation

ERIC Educational Resources Information Center

Argyriou, Paraskevi; Mohr, Christine; Kita, Sotaro

2017-01-01

Research suggests that speech-accompanying gestures influence cognitive processes, but it is not clear whether the gestural benefit is specific to the gesturing hand. Two experiments tested the "(right/left) hand-specificity" hypothesis for self-oriented functions of gestures: gestures with a particular hand enhance cognitive processes…

Location-dependent correlation between tissue structure and the mechanical behaviour of the urinary bladder.

PubMed

Morales-Orcajo, Enrique; Siebert, Tobias; Böl, Markus

2018-05-25

The mechanical properties of the urinary bladder wall are important to understand its filling-voiding cycle in health and disease. However, much remains unknown about its mechanical properties, especially regarding regional heterogeneities and wall microstructure. The present study aimed to assess the regional differences in the mechanical properties and microstructure of the urinary bladder wall. Ninety (n=90) samples of porcine urinary bladder wall (ten samples from nine different locations) were mechanically and histologically analysed. Half of the samples (n=45) were equibiaxially tested within physiological conditions, and the other half, matching the sample location of the mechanical tests, was frozen, cryosectioned, and stained with Picro-Sirius red to differentiate smooth muscle cells, extracellular matrix, and fat. The bladder wall shows a non-linear stress-stretch relationship with hysteresis and softening effects. Regional differences were found in the mechanical response and in the microstructure. The trigone region presents higher peak stresses and thinner muscularis layer compared to the rest of the bladder. Furthermore, the ventral side of the bladder presents anisotropic characteristics, whereas the dorsal side features perfect isotropic behaviour. This response matches the smooth muscle fibre bundle orientation within the tunica muscularis. This layer, comprising approximately 78% of the wall thickness, is composed of two fibre bundle arrangements that are cross-oriented, one with respect to the other, varying the angle between them across the organ. That is, the ventral side presents a 60°/120° cross-orientation structure, while the muscle bundles were oriented perpendicular in the dorsal side. In the present study, we demonstrate that the mechanical properties and the microstructure of the urinary bladder wall are heterogeneous across the organ. The mechanical properties and the microstructure of the urinary bladder wall within nine specific locations matching explicitly the mechanical and structural variations have been examined. On the one hand, the results of this study contribute to the understanding of bladder mechanics and thus to their functional understanding of bladder filling and voiding. On the other hand, they are relevant to the fields of constitutive formulation of bladder tissue, whole bladder mechanics, and bladder-derived scaffolds i.e., tissue-engineering grafts. Copyright © 2018 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

The Impact of Hands-On-Approach on Student Academic Performance in Basic Science and Mathematics

ERIC Educational Resources Information Center

Ekwueme, Cecilia O.; Ekon, Esther E.; Ezenwa-Nebife, Dorothy C.

2015-01-01

Children can learn mathematics and sciences effectively even before being exposed to formal school curriculum if basic Mathematics and Sciences concepts are communicated to them early using activity oriented (Hands-on) method of teaching. Mathematics and Science are practical and activity oriented and can best be learnt through inquiry (Okebukola…

Optimum runway orientation relative to crosswinds

NASA Technical Reports Server (NTRS)

Falls, L. W.; Brown, S. C.

1972-01-01

Specific magnitudes of crosswinds may exist that could be constraints to the success of an aircraft mission such as the landing of the proposed space shuttle. A method is required to determine the orientation or azimuth of the proposed runway which will minimize the probability of certain critical crosswinds. Two procedures for obtaining the optimum runway orientation relative to minimizing a specified crosswind speed are described and illustrated with examples. The empirical procedure requires only hand calculations on an ordinary wind rose. The theoretical method utilizes wind statistics computed after the bivariate normal elliptical distribution is applied to a data sample of component winds. This method requires only the assumption that the wind components are bivariate normally distributed. This assumption seems to be reasonable. Studies are currently in progress for testing wind components for bivariate normality for various stations. The close agreement between the theoretical and empirical results for the example chosen substantiates the bivariate normal assumption.

Task-Oriented Training with Computer Games for People with Rheumatoid Arthritis or Hand Osteoarthritis: A Feasibility Randomized Controlled Trial.

PubMed

Srikesavan, Cynthia Swarnalatha; Shay, Barbara; Szturm, Tony

2016-09-13

To examine the feasibility of a clinical trial on a novel, home-based task-oriented training with conventional hand exercises in people with rheumatoid arthritis or hand osteoarthritis. To explore the experiences of participants who completed their respective home exercise programmes. Thirty volunteer participants aged between 30 and 60 years and diagnosed with rheumatoid arthritis or hand osteoarthritis were proposed for a single-center, assessor-blinded, randomized controlled trial ( ClinicalTrials.gov : NCT01635582). Participants received task-oriented training with interactive computer games and objects of daily life or finger mobility and strengthening exercises. Both programmes were home based and were done four sessions per week with 20 minutes each session for 6 weeks. Major feasibility outcomes were number of volunteers screened, randomized, and retained; completion of blinded assessments, exercise training, and home exercise sessions; equipment and data management; and clinical outcomes of hand function. Reaching the recruitment target in 18 months and achieving exercise compliance >80% were set as success criteria. Concurrent with the trial, focus group interviews explored experiences of those participants who completed their respective programmes. After trial initiation, revisions in inclusion criteria were required to promote recruitment. A total of 17 participants were randomized and 15 were retained. Completion of assessments, exercise training, and home exercise sessions; equipment and data collection and management demonstrated excellent feasibility. Both groups improved in hand function outcomes and exercise compliance was above 85%. Participants perceived both programmes as appropriate and acceptable. Participants who completed task-oriented training also agreed that playing different computer games was enjoyable, engaging, and motivating. Findings demonstrate initial evidence on recruitment, feasibility of trial procedures, and acceptability of task-oriented training in people with rheumatoid arthritis or hand osteoarthritis. Since the pilot trial was unsuccessful in participant recruitment, a large trial will not follow.

Metacarpophalangeal joint orientation in anthropoid manual phalanges.

PubMed

Rein, Thomas R; McCarty, Laura A

2012-12-01

The proximal articular surface angle of orientation (AO) of proximal phalanges of the hand and foot has been used to infer the locomotor profile of extinct Miocene catarrhines and early hominins. Previous work has found that joint orientation distinguishes quadrupedal from suspensory anthropoids. The purpose of this study is to expand on previous research by examining this feature within and across several primate clades, allowing us to investigate the potential influences of locomotion, substrate usage, hand posture, and phylogeny. We also report AO measurements in human proximal hand phalanges, allowing us to examine human skeletal variation within a wide comparative context. The angle of orientation was measured on manual proximal third phalanges of 21 extant anthropoid species using a Microscribe digitizer. Comparisons were made between locomotor groups within hominoids, platyrrhines, and cercopithecoids. Proximal phalanges of quadrupedal species were characterized by greater dorsal orientation than those of suspensory taxa in hominoids and atelids. In addition, arboreal quadrupeds had greater AO values than terrestrial quadrupeds within the Cercopithecoidea. However, within the terrestrial locomotor group, mean AO values did not differ between palmigrade and digitigrade taxa. Thus, while there appears to be a functional signal related to substrate usage, differences in use of hand postures when moving on the ground were not reflected in proximal joint orientation of the proximal phalanx. Finally, we measured relatively low AO values in human phalanges, which might be related to integration with serially homologous pedal phalanges that are under strong selective pressure related to bipedalism. Copyright © 2012 Wiley Periodicals, Inc.

Task-oriented training with computer gaming in people with rheumatoid arthritisor osteoarthritis of the hand: study protocol of a randomized controlled pilot trial

PubMed Central

2013-01-01

Background Significant restriction in the ability to participate in home, work and community life results from pain, fatigue, joint damage, stiffness and reduced joint range of motion and muscle strength in people with rheumatoid arthritis or osteoarthritis of the hand. With modest evidence on the therapeutic effectiveness of conventional hand exercises, a task-oriented training program via real life object manipulations has been developed for people with arthritis. An innovative, computer-based gaming platform that allows a broad range of common objects to be seamlessly transformed into therapeutic input devices through instrumentation with a motion-sense mouse has also been designed. Personalized objects are selected to target specific training goals such as graded finger mobility, strength, endurance or fine/gross dexterous functions. The movements and object manipulation tasks that replicate common situations in everyday living will then be used to control and play any computer game, making practice challenging and engaging. Methods/Design The ongoing study is a 6-week, single-center, parallel-group, equally allocated and assessor-blinded pilot randomized controlled trial. Thirty people with rheumatoid arthritis or osteoarthritis affecting the hand will be randomized to receive either conventional hand exercises or the task-oriented training. The purpose is to determine a preliminary estimation of therapeutic effectiveness and feasibility of the task-oriented training program. Performance based and self-reported hand function, and exercise compliance are the study outcomes. Changes in outcomes (pre to post intervention) within each group will be assessed by paired Student t test or Wilcoxon signed-rank test and between groups (control versus experimental) post intervention using unpaired Student t test or Mann–Whitney U test. Discussion The study findings will inform decisions on the feasibility, safety and completion rate and will also provide preliminary data on the treatment effects of the task-oriented training compared with conventional hand exercises in people with rheumatoid arthritis or osteoarthritis of the hand. Trial registration ClinicalTrials.gov: NCT01635582 PMID:23497529

Efficacy of low-level laser therapy associated to orthoses for patients with carpal tunnel syndrome: A randomized single-blinded controlled trial.

PubMed

Barbosa, Rafael Inácio; Fonseca, Marisa de Cássia Registro; Rodrigues, Eula Katucha da Silva; Tamanini, Guilherme; Marcolino, Alexandre Marcio; Mazzer, Nilton; Guirro, Rinaldo Roberto de Jesus; MacDermid, Joy

2016-08-10

Compare the efficacy of orthoses and patient education with and without the addition to Low-Level Laser Therapy (LLLT - 660 nm, 30 mW, a continuous regime and bean area of 0.06 cm2). The laser irradiation was delivered with the fluency of 10J/cm2 in patients with mild and moderate Carpal Tunnel Syndrome (CTS). 48 patients were randomized and 30 finished the protocol (a sample loss of 37.5%), 90% female and 10% males. Randomization was applied to allocate the patients in each one of the groups, with association or not to LLLT (group orthoses or LLLT and orthoses). All of them were submitted to ergonomic home orientations. The short-term symptoms and function outcome were assessed through: Boston Carpal Tunnel Questionnaire (BCTQ) - Severity of Symptoms (SS) Functional Score (FS). Pain (VAS), Semmes-Weinstein monofilaments, 2PD and pinch strength was used for characterization of the sample. Most of the participants were women, over 4th decade enrolled on heavy hand duties occupations, right-handed, 66.7% affected on dominant hand, without alterations in sensory median nerve thresholds or pinch strength. Both groups showed a reduction of total BCTQ score and its subdomains after six weeks, with significant difference (p< 0.05), comparing to baseline. No significant difference was found between groups. A Minimal clinical change was observed after the intervention in 92.3% of participants for BCTQ subdomain severity of symptoms at individual comparison for LLLT and orthoses group and 76.5% for the orthoses group, demonstrating clinical relevance. Effect size Cohen's index was moderate for the severity of symptoms. LLLT in association to orthoses and ergonomic orientation seems to be effective in short-term symptoms relieve for patients with mild and moderate CTS.

SANS study of deformation and relaxation of a comb-like liquid crystal polymer in the nematic phase

NASA Astrophysics Data System (ADS)

Brûlet, A.; Boué, F.; Keller, P.; Davidson, P.; Strazielle, C.; Cotton, J. P.

1994-06-01

A comb-like liquid crystal polymer is stretched and quenched after a certain time in the nematic phase. The conformation of the deformed chain is determined using small angle neutron scattering (SANS) as a function of the temperature of stretching, the stretching ratio and the duration of the relaxation. The scattering data are well fitted to junction affine and phantom network models. Some data are even well fitted by a totally affine model that we call “ pseudo affine ” because the only parameter, the stretching ratio, is found to be well below the macroscopic stretching ratio. The latter result, never encountered with amorphous polymers, is attributed to the cooperative effects of the nematic phase. We also note that the form factors of the chain in the underformed sample remain similar in the isotropic, nematic and glassy state ; they correspond to a Gaussian chain. The same samples were studied by wide angle X-ray scattering. On one hand, the orientation of the mesogenic groups is found to be parallel or perpendicular to the stretching direction depending on the stretching temperature. This result is discussed as a function of the presence of smectic fluctuations. On the other hand, longer relaxations at constant elongation ratio do not lead to a disorganization of the mesogenic group orientation whereas the polymer chains are partly relaxed.

Design, data, and theory regarding a digital hand inclinometer: a portable device for studying slant perception.

PubMed

Li, Zhi; Durgin, Frank H

2011-06-01

Palm boards are often used as a nonverbal measure in human slant perception studies. It was recently found that palm boards are biased and relatively insensitive measures, and that an unrestricted hand gesture provides a more sensitive response (Durgin, Hajnal, Li, Tonge, & Stigliani, Acta Psychologica, 134, 182-197, 2010a). In this article, we describe an original design for a portable lightweight digital device for measuring hand orientation. This device is microcontroller-based and uses a micro inclinometer chip as its inclination sensor. The parts are fairly inexpensive. This device, used to measure hand orientation, provides a sensitive nonverbal method for studying slant perception, which can be used in both indoor and outdoor environments. We present data comparing the use of a free hand to palm-board and verbal measures for surfaces within reach and explain how to interpret free-hand measures for outdoor hills.

The Interplay of Students' Motivational Orientations, Their Chemistry Achievements and Their Perception of Learning within the Hands-On Approach to Visible Spectrometry

ERIC Educational Resources Information Center

Jurisevic, Mojca; Vrtacnik, Margareta; Kwiatkowski, Marek; Gros, Natasa

2012-01-01

The purpose of the study was to determine the relationship between students' motivational orientations and their chemistry achievements and perception of learning within the original case of the hands-on approach to visible spectrometry. A total of 295 students from Polish and Slovenian vocational and technical high schools participated in the…

Effects of visual information regarding allocentric processing in haptic parallelity matching.

PubMed

Van Mier, Hanneke I

2013-10-01

Research has revealed that haptic perception of parallelity deviates from physical reality. Large and systematic deviations have been found in haptic parallelity matching most likely due to the influence of the hand-centered egocentric reference frame. Providing information that increases the influence of allocentric processing has been shown to improve performance on haptic matching. In this study allocentric processing was stimulated by providing informative vision in haptic matching tasks that were performed using hand- and arm-centered reference frames. Twenty blindfolded participants (ten men, ten women) explored the orientation of a reference bar with the non-dominant hand and subsequently matched (task HP) or mirrored (task HM) its orientation on a test bar with the dominant hand. Visual information was provided by means of informative vision with participants having full view of the test bar, while the reference bar was blocked from their view (task VHP). To decrease the egocentric bias of the hands, participants also performed a visual haptic parallelity drawing task (task VHPD) using an arm-centered reference frame, by drawing the orientation of the reference bar. In all tasks, the distance between and orientation of the bars were manipulated. A significant effect of task was found; performance improved from task HP, to VHP to VHPD, and HM. Significant effects of distance were found in the first three tasks, whereas orientation and gender effects were only significant in tasks HP and VHP. The results showed that stimulating allocentric processing by means of informative vision and reducing the egocentric bias by using an arm-centered reference frame led to most accurate performance on parallelity matching. © 2013 Elsevier B.V. All rights reserved.

Mössbauer Magnetic Scan experiments

NASA Astrophysics Data System (ADS)

Pasquevich, G. A.; Mendoza Zélis, P.; Lencina, A.; Veiga, A.; Fernández van Raap, M. B.; Sánchez, F. H.

2014-06-01

We report an application of the Mössbauer Effect designed to retrieve specific information on the magnetic response of iron-containing materials. It consists in the measurement of the nuclear absorption of gamma-rays as a function of an external magnetic field for a specific nuclear transition between magnetically-split nuclear levels. The experiments, here termed Mössbauer Magnetic Scan experiments, were carried out recording the absorption of 57Fe 14.4 keV gamma-ray in α-Fe at constant Doppler energies coincident with some of the spectral lines of the magnetically split Mössbauer spectrum. Due to the dependence of the transition probabilities on the relative orientation between the nuclear magnetic moment and the gamma-ray direction, the present application results in a useful method to study the magnetic-field evolution of the distribution of atomic-magnetic-moment orientations. The proposed technique inherit from the Mössbauer Spectroscopy the chemical-element selectiveness as well as the ability to differentiate responses from iron atoms located at inequivalent site or at different phases. In this work, we show that the data analysis for these experiments depends on the sample thickness that the gamma-ray has to cross. For thin samples (i.e.samples with Mössbauer effective thicknesses lower than one) the magnetic-field dependence of the second-order-moment of the orientation distribution in the direction of the gamma ray is obtained. On the other hand, for thicker samples, although the data analysis is more complex, the dependences of the three second-order-moments of the orientation distribution are obtained. The experiments were performed on two α-Fe foils of different Mössbauer effective thicknesses. They were chosen to represent the cases of thin and thick Mössbauer absorbers. The magnetic evolution of the orientations distribution is compared with results obtained from magnetometric measurements showing a good agreement as well indicating the complementarity of both techniques. A complete description of the experimental set up and the formalism for Mössbauer Magnetic Scan data analysis are presented.

Signs in Which Handshape and Hand Orientation Are either Not Visible or Are Only Partially Visible: What Is the Consequence for Lexical Recognition?

ERIC Educational Resources Information Center

ten Holt, G. A.; van Doorn, A. J.; de Ridder, H.; Reinders, M. J. T.; Hendriks, E. A.

2009-01-01

We present the results of an experiment on lexical recognition of human sign language signs in which the available perceptual information about handshape and hand orientation was manipulated. Stimuli were videos of signs from Sign Language of the Netherlands (SLN). The videos were processed to create four conditions: (1) one in which neither…

Manifold parametrization of the left ventricle for a statistical modelling of its complete anatomy

NASA Astrophysics Data System (ADS)

Gil, D.; Garcia-Barnes, J.; Hernández-Sabate, A.; Marti, E.

2010-03-01

Distortion of Left Ventricle (LV) external anatomy is related to some dysfunctions, such as hypertrophy. The architecture of myocardial fibers determines LV electromechanical activation patterns as well as mechanics. Thus, their joined modelling would allow the design of specific interventions (such as peacemaker implantation and LV remodelling) and therapies (such as resynchronization). On one hand, accurate modelling of external anatomy requires either a dense sampling or a continuous infinite dimensional approach, which requires non-Euclidean statistics. On the other hand, computation of fiber models requires statistics on Riemannian spaces. Most approaches compute separate statistical models for external anatomy and fibers architecture. In this work we propose a general mathematical framework based on differential geometry concepts for computing a statistical model including, both, external and fiber anatomy. Our framework provides a continuous approach to external anatomy supporting standard statistics. We also provide a straightforward formula for the computation of the Riemannian fiber statistics. We have applied our methodology to the computation of complete anatomical atlas of canine hearts from diffusion tensor studies. The orientation of fibers over the average external geometry agrees with the segmental description of orientations reported in the literature.

Spatial Orienting Following Dynamic Cues in Infancy: Grasping Hands versus Inanimate Objects

ERIC Educational Resources Information Center

Wronski, Caroline; Daum, Moritz M.

2014-01-01

Movement perception facilitates spatial orienting of attention in infants (Farroni, Johnson, Brockbank, & Simion, 2000). In a series of 4 experiments, we investigated how orienting of attention in infancy is modulated by dynamic stimuli. Experiment 1 (N = 36) demonstrated that 5-month-olds as well as 7-month-olds orient to the direction of a…

ProtPOS: a python package for the prediction of protein preferred orientation on a surface.

PubMed

Ngai, Jimmy C F; Mak, Pui-In; Siu, Shirley W I

2016-08-15

Atomistic molecular dynamics simulation is a promising technique to investigate the energetics and dynamics in the protein-surface adsorption process which is of high relevance to modern biotechnological applications. To increase the chance of success in simulating the adsorption process, favorable orientations of the protein at the surface must be determined. Here, we present ProtPOS which is a lightweight and easy-to-use python package that can predict low-energy protein orientations on a surface of interest. It combines a fast conformational sampling algorithm with the energy calculation of GROMACS. The advantage of ProtPOS is it allows users to select any force fields suitable for the system at hand and provide structural output readily available for further simulation studies. ProtPOS is freely available for academic and non-profit uses at http://cbbio.cis.umac.mo/software/protpos Supplementary data are available at Bioinformatics online. shirleysiu@umac.mo. © The Author 2016. Published by Oxford University Press.

ProtPOS: a python package for the prediction of protein preferred orientation on a surface

PubMed Central

Ngai, Jimmy C. F.; Mak, Pui-In; Siu, Shirley W. I.

2016-01-01

Summary: Atomistic molecular dynamics simulation is a promising technique to investigate the energetics and dynamics in the protein–surface adsorption process which is of high relevance to modern biotechnological applications. To increase the chance of success in simulating the adsorption process, favorable orientations of the protein at the surface must be determined. Here, we present ProtPOS which is a lightweight and easy-to-use python package that can predict low-energy protein orientations on a surface of interest. It combines a fast conformational sampling algorithm with the energy calculation of GROMACS. The advantage of ProtPOS is it allows users to select any force fields suitable for the system at hand and provide structural output readily available for further simulation studies. Availability and Implementation: ProtPOS is freely available for academic and non-profit uses at http://cbbio.cis.umac.mo/software/protpos Supplementary information: Supplementary data are available at Bioinformatics online. Contact: shirleysiu@umac.mo PMID:27153619

Illumination-invariant and deformation-tolerant inner knuckle print recognition using portable devices.

PubMed

Xu, Xuemiao; Jin, Qiang; Zhou, Le; Qin, Jing; Wong, Tien-Tsin; Han, Guoqiang

2015-02-12

We propose a novel biometric recognition method that identifies the inner knuckle print (IKP). It is robust enough to confront uncontrolled lighting conditions, pose variations and low imaging quality. Such robustness is crucial for its application on portable devices equipped with consumer-level cameras. We achieve this robustness by two means. First, we propose a novel feature extraction scheme that highlights the salient structure and suppresses incorrect and/or unwanted features. The extracted IKP features retain simple geometry and morphology and reduce the interference of illumination. Second, to counteract the deformation induced by different hand orientations, we propose a novel structure-context descriptor based on local statistics. To our best knowledge, we are the first to simultaneously consider the illumination invariance and deformation tolerance for appearance-based low-resolution hand biometrics. Settings in previous works are more restrictive. They made strong assumptions either about the illumination condition or the restrictive hand orientation. Extensive experiments demonstrate that our method outperforms the state-of-the-art methods in terms of recognition accuracy, especially under uncontrolled lighting conditions and the flexible hand orientation requirement.

Illumination-Invariant and Deformation-Tolerant Inner Knuckle Print Recognition Using Portable Devices

PubMed Central

Xu, Xuemiao; Jin, Qiang; Zhou, Le; Qin, Jing; Wong, Tien-Tsin; Han, Guoqiang

2015-01-01

We propose a novel biometric recognition method that identifies the inner knuckle print (IKP). It is robust enough to confront uncontrolled lighting conditions, pose variations and low imaging quality. Such robustness is crucial for its application on portable devices equipped with consumer-level cameras. We achieve this robustness by two means. First, we propose a novel feature extraction scheme that highlights the salient structure and suppresses incorrect and/or unwanted features. The extracted IKP features retain simple geometry and morphology and reduce the interference of illumination. Second, to counteract the deformation induced by different hand orientations, we propose a novel structure-context descriptor based on local statistics. To our best knowledge, we are the first to simultaneously consider the illumination invariance and deformation tolerance for appearance-based low-resolution hand biometrics. Settings in previous works are more restrictive. They made strong assumptions either about the illumination condition or the restrictive hand orientation. Extensive experiments demonstrate that our method outperforms the state-of-the-art methods in terms of recognition accuracy, especially under uncontrolled lighting conditions and the flexible hand orientation requirement. PMID:25686317

The natural angle between the hand and handle and the effect of handle orientation on wrist radial/ulnar deviation during maximal push exertions.

PubMed

Young, Justin G; Lin, Jia-Hua; Chang, Chien-Chi; McGorry, Raymond W

2013-01-01

The purpose of this experiment was to quantify the natural angle between the hand and a handle, and to investigate three design factors: handle rotation, handle tilt and between-handle width on the natural angle as well as resultant wrist radial/ulnar deviation ('RUD') for pushing tasks. Photographs taken of the right upper limb of 31 participants (14 women and 17 men) performing maximal seated push exertions on different handles were analysed. Natural hand/handle angle and RUD were assessed. It was found that all of the three design factors significantly affected natural handle angle and wrist RUD, but participant gender did not. The natural angle between the hand and the cylindrical handle was 65 ± 7°. Wrist deviation was reduced for handles that were rotated 0° (horizontal) and at the narrow width (31 cm). Handles that were tilted forward 15° reduced radial deviation consistently (12-13°) across handle conditions. Manual materials handling (MMH) tasks involving pushing have been related to increased risk of musculoskeletal injury. This study shows that handle orientation influences hand and wrist posture during pushing, and suggests that the design of push handles on carts and other MMH aids can be improved by adjusting their orientation to fit the natural interface between the hand and handle.

The Perils of Electron Microprobe Analysis of Apatite

NASA Astrophysics Data System (ADS)

Henderson, C. E.; Essene, E. J.; Wang, K. L.; Zhang, Y.

2010-12-01

Accurate electron microprobe analysis of apatite is problematic, especially for F and Cl, whose concentrations are essential in calculating a non-analyzable OH component. The issues include beam-induced sample damage and temporal variation of F and Cl X-rays; both effects are mainly dependent on beam current, beam spot size and apatite orientation [1]. To establish a rigorous analytical procedure, several oriented apatite samples, including the well-known Durango and Wilberforce fluorapatites, were analyzed for a large suite of elements, including oxygen. Careful X-ray spectroscopy was performed, including selection of appropriate analytical standards, background measurement positions and comparison of area peak factors. Polarized infrared spectra on oriented apatite samples were also collected for complementary information. The results show that when apatite samples are oriented with the c-axis parallel to the electron beam, there is significant nonlinear variation (an increase or decrease, depending on measurement conditions) of F and Cl X-ray intensities during analyses, and systematically higher-than-expected F apparent concentrations, despite the careful selection of electron beam conditions from a series of X-ray time scans and zero-time count rate extrapolation. On the other hand, when the electron beam is oriented perpendicular to the c-axis, with a ≤ 15 nA beam current and a ≥ 5 µm diameter defocused beam, F and Cl X-ray intensities do not vary or vary slowly and predictably with time, yielding quantitative analysis results for the Durango and Wilberforce apatites (both containing little OH) which are in good agreement with published wet chemical analyses. Furthermore, the OH and CO2 contents inferred for three other analyzed apatite samples are roughly consistent with infrared analyses. For example, for an apatite from Silver Crater Mine in Ontario, significant deficiency in the P site, as well as extra F, was inferred from microprobe analyses. Infrared spectra show a strong band of (CO3)2- for this apatite, which indicates a possible substitution of (CO3)2-(F)- for (PO4)3-. Other techniques to mitigate temporal variation of F and Cl, including alternative metal coatings, concurrent stage movement, and cryogenic sample-cooling were attempted, but did not eliminate the disparity in measured F concentrations between the two sample orientations. Thus, we believe that F measurements on F-rich apatite samples of unknown orientation are immediately suspect and should be regarded as upper limits of true F concentration. X-ray mapping, CL imaging and subsequent quantitative analyses show compositional variations in Na, S, Si, and REE in the Durango and Wilberforce fluorapatite samples used in this study. Problems of electron beam sensitivity, X-ray intensity anisotropy due to sample orientation, and compositional heterogeneity call into question their continued use as routine microanalysis reference materials. Microanalysts are encouraged to use more robust calibration standards, such as Cl-rich or other F-poor apatites for Ca, P, O and Cl, and MgF2 for F measurements. [1] Stormer, J.C., Pierson, M.L, and Tacker, R.C. (1993) Variation of F and Cl X-ray intensity due to anisotropic diffusion in apatite during electron microprobe analysis. Am. Min., 78, 641-648.

Stress generated modifications of epitaxial ferroelectric SrTiO3 films on sapphire

NASA Astrophysics Data System (ADS)

Hollmann, E.; Schubert, J.; Kutzner, R.; Wördenweber, R.

2009-06-01

The effect of lattice-mismatch induced stress upon the crystallographic structure, strain, strain relaxation, and the generation of different types of defects in heteroepitaxially grown SrTiO3 films on CeO2 buffered sapphire is examined. Depending on the thickness of the SrTiO3 layer, characteristic changes in the structural perfection of the layers, their crystallographic orientation with respect to the substrate system, and their strain is observed. For thin films misfit dislocations partially compensate the stress in the SrTiO3 layer, whereas cracks develop in thicker SrTiO3 films. The cracks are orientated along two predominant crystallographic orientations of the sapphire. The structural modifications and the formation of misfit defects and cracks are explained in a model based on lattice misfit induced stress, on the one hand, and energy considerations taking into account the stress release due to crack formation and the energy necessary for the formation of new surfaces at the crack, on the other hand. The impact of lattice misfit is discussed in two steps, i.e., intrinsic and thermal induced misfits during heteroepitaxial film growth at a given temperature and the subsequent cooling of the sample, respectively. The comparison of the theoretical predictions and the experimental observations demonstrate that intrinsic mismatch and thermal mismatch have to be considered in order to explain strain dependent effects in complex heteroepitaxial layer systems such as induced ferroelectricity of SrTiO3 on sapphire.

Mirror writing in 5- to 6-year-old children: The preferred hand is not the explanation.

PubMed

Fischer, Jean-Paul; Koch, Anne-Marie

2016-01-01

Non-pathological, spontaneous mirror writing, whether complete or partial, has long been associated with writing with the left hand and attributed to the fact that abductive writing, which most people find easier, is from right to left when people write with their left hand. However, recent research suggests another explanation: children who do not know the orientation of the letters and digits may apply an implicit right-writing rule which causes them to invert mainly left-oriented characters (e.g., J, 3). But would left-hand writers apply such a rule? The present study examines the relationship between these two explanations of mirror writing and asks whether they coexist in children who write with their left hand. Is the abductive writing explanation specific to mirror writing by left-hand writers and the implicit right-writing rule specific to right-hand writers? A comparison of 59 children who wrote with their left hand and 59 children who wrote with their right hand (matched for age and school experience) provided clear evidence against the abductive-writing explanation and in favour of the right-writing rule for both groups. Therefore, spontaneous mirror writing in typical 5- to 6-year-olds does not seem to be a function of preferred writing hand.

Bibliography. Computer-Oriented Projects, 1987.

ERIC Educational Resources Information Center

Smith, Richard L., Comp.

1988-01-01

Provides an annotated list of references on computer-oriented projects. Includes information on computers; hands-on versus simulations; games; instruction; students' attitudes and learning styles; artificial intelligence; tutoring; and application of spreadsheets. (RT)

Bilateral Symmetry of Distortions of Tactile Size Perception.

PubMed

Longo, Matthew R; Ghosh, Arko; Yahya, Tasneem

2015-01-01

The perceived distance between touches on the limbs is generally bigger for distances oriented across the width of the limb than for distances oriented along the length of the limb. The present study aimed to investigate the coherence of such distortions of tactile size perception across different skin surfaces. We investigated distortions of tactile size perception on the dorsal and palmar surfaces of both the left and right hands as well as the forehead. Participants judged which of two tactile distances felt larger. One distance was aligned with the proximodistal axis (along the body), the other with the mediolateral axis (across the body). Clear distortions were found on all five skin surfaces, with stimuli oriented across the width of the body being perceived as farther apart than those oriented along the length of the body. Consistent with previous results, distortions were smaller on the palmar than on the dorsal hand surface. Distortion on the forehead was intermediate between the dorsal and palmar surfaces. There were clear correlations between distortion on the left and right hands, for both the dorsal and palmar skin surfaces. In contrast, within each hand, there was no significant correlation between the two skin surfaces. Distortion on the forehead was not significantly correlated with that on any of the other skin surfaces. These results provide evidence for bilaterally symmetric representations underlying tactile size perception. © The Author(s) 2015.

Effects of tool handle dimension and workpiece orientation and size on wrist ulnar/radial torque strength, usability and discomfort in a wrench task.

PubMed

Dianat, Iman; Rahimi, Soleyman; Nedaei, Moein; Asghari Jafarabadi, Mohammad; Oskouei, Ali E

2017-03-01

The effects of tool handle dimension (three modified designs of wrenches with 30-50 mm diameter cylindrical handles and traditional design with rectangular cross-sectional (5 mm × 25 mm) handle), workpiece orientation (vertical/horizontal) and workpiece size (small/large) as well as user's hand size on wrist ulnar/radial (U/R) torque strength, usability and discomfort, and also the relationship between these variables were evaluated in a maximum torque task using wrenches. The highest and lowest levels of maximal wrist U/R torque strength were recorded for the 30 mm diameter handle and traditional wrench design, respectively. The prototype handle with 30 mm diameter, together with 40 mm diameter handle, was also better than other designs as they received higher usability ratings and caused less discomfort. The mean wrist torque strength exerted on a vertically oriented workpiece (in the sagittal plane) was 23.8% higher than that exerted on a horizontally oriented one (in the transverse plane). The user's hand size had no effect on torque exertions. The wrist torque strength and usability were negatively correlated with hand and finger discomfort ratings. The results are also discussed in terms of their implications for hand tool and workstation configuration in torque tasks involving wrenches. Copyright © 2016 Elsevier Ltd. All rights reserved.

Spatial-Orientation Priming Impedes Rather than Facilitates the Spontaneous Control of Hand-Retraction Speeds in Patients with Parkinson’s Disease

PubMed Central

Yanovich, Polina; Isenhower, Robert W.; Sage, Jacob; Torres, Elizabeth B.

2013-01-01

Background Often in Parkinson’s disease (PD) motor-related problems overshadow latent non-motor deficits as it is difficult to dissociate one from the other with commonly used observational inventories. Here we ask if the variability patterns of hand speed and acceleration would be revealing of deficits in spatial-orientation related decisions as patients performed a familiar reach-to-grasp task. To this end we use spatial-orientation priming which normally facilitates motor-program selection and asked whether in PD spatial-orientation priming helps or hinders performance. Methods To dissociate spatial-orientation- and motor-related deficits participants performed two versions of the task. The biomechanical version (DEFAULT) required the same postural- and hand-paths as the orientation-priming version (primed-UP). Any differences in the patients here could not be due to motor issues as the tasks were biomechanically identical. The other priming version (primed-DOWN) however required additional spatial and postural processing. We assessed in all three cases both the forward segment deliberately aimed towards the spatial-target and the retracting segment, spontaneously bringing the hand to rest without an instructed goal. Results and Conclusions We found that forward and retracting segments belonged in two different statistical classes according to the fluctuations of speed and acceleration maxima. Further inspection revealed conservation of the forward (voluntary) control of speed but in PD a discontinuity of this control emerged during the uninstructed retractions which was absent in NC. Two PD groups self-emerged: one group in which priming always affected the retractions and the other in which only the more challenging primed-DOWN condition was affected. These PD-groups self-formed according to the speed variability patterns, which systematically changed along a gradient that depended on the priming, thus dissociating motor from spatial-orientation issues. Priming did not facilitate the motor task in PD but it did reveal a breakdown in the spatial-orientation decision that was independent of the motor-postural path. PMID:23843963

A Novel Domain Assembly Routine for Creating Full-Length Models of Membrane Proteins from Known Domain Structures.

PubMed

Koehler Leman, Julia; Bonneau, Richard

2018-04-03

Membrane proteins composed of soluble and membrane domains are often studied one domain at a time. However, to understand the biological function of entire protein systems and their interactions with each other and drugs, knowledge of full-length structures or models is required. Although few computational methods exist that could potentially be used to model full-length constructs of membrane proteins, none of these methods are perfectly suited for the problem at hand. Existing methods require an interface or knowledge of the relative orientations of the domains or are not designed for domain assembly, and none of them are developed for membrane proteins. Here we describe the first domain assembly protocol specifically designed for membrane proteins that assembles intra- and extracellular soluble domains and the transmembrane domain into models of the full-length membrane protein. Our protocol does not require an interface between the domains and samples possible domain orientations based on backbone dihedrals in the flexible linker regions, created via fragment insertion, while keeping the transmembrane domain fixed in the membrane. For five examples tested, our method mp_domain_assembly, implemented in RosettaMP, samples domain orientations close to the known structure and is best used in conjunction with experimental data to reduce the conformational search space.

Computational Fluid Dynamics Study of Swimmer's Hand Velocity, Orientation, and Shape: Contributions to Hydrodynamics

PubMed Central

Bilinauskaite, Milda; Mantha, Vishveshwar Rajendra; Rouboa, Abel Ilah; Ziliukas, Pranas; Silva, Antonio Jose

2013-01-01

The aim of this paper is to determine the hydrodynamic characteristics of swimmer's scanned hand models for various combinations of both the angle of attack and the sweepback angle and shape and velocity of swimmer's hand, simulating separate underwater arm stroke phases of freestyle (front crawl) swimming. Four realistic 3D models of swimmer's hand corresponding to different combinations of separated/closed fingers positions were used to simulate different underwater front crawl phases. The fluid flow was simulated using FLUENT (ANSYS, PA, USA). Drag force and drag coefficient were calculated using (computational fluid dynamics) CFD in steady state. Results showed that the drag force and coefficient varied at the different flow velocities on all shapes of the hand and variation was observed for different hand positions corresponding to different stroke phases. The models of the hand with thumb adducted and abducted generated the highest drag forces and drag coefficients. The current study suggests that the realistic variation of both the orientation angles influenced higher values of drag, lift, and resultant coefficients and forces. To augment resultant force, which affects swimmer's propulsion, the swimmer should concentrate in effectively optimising achievable hand areas during crucial propulsive phases. PMID:23691493

Essentialist beliefs, sexual identity uncertainty, internalized homonegativity and psychological wellbeing in gay men.

PubMed

Morandini, James S; Blaszczynski, Alexander; Ross, Michael W; Costa, Daniel S J; Dar-Nimrod, Ilan

2015-07-01

The present study examined essentialist beliefs about sexual orientation and their implications for sexual identity uncertainty, internalized homonegativity and psychological wellbeing in a sample of gay men. A combination of targeted sampling and snowball strategies were used to recruit 639 gay identifying men for a cross-sectional online survey. Participants completed a questionnaire assessing sexual orientation beliefs, sexual identity uncertainty, internalized homonegativity, and psychological wellbeing outcomes. Structural equation modeling was used to test whether essentialist beliefs were associated with psychological wellbeing indirectly via their effect on sexual identity uncertainty and internalized homonegativity. A unique pattern of direct and indirect effects was observed in which facets of essentialism predicted sexual identity uncertainty, internalized homonegativity and psychological wellbeing. Of note, viewing sexual orientation as immutable/biologically based and as existing in discrete categories, were associated with less sexual identity uncertainty. On the other hand, these beliefs had divergent relationships with internalized homonegativity, with immutability/biological beliefs associated with lower, and discreteness beliefs associated with greater internalized homonegativity. Of interest, although sexual identity uncertainty was associated with poorer psychological wellbeing via its contribution to internalized homophobia, there was no direct relationship between identity uncertainty and psychological wellbeing. Findings indicate that essentializing sexual orientation has mixed implications for sexual identity uncertainty and internalized homonegativity and wellbeing in gay men. Those undertaking educational and clinical interventions with gay men should be aware of the benefits and of caveats of essentialist theories of homosexuality for this population. (c) 2015 APA, all rights reserved).

Evaluation of the shape of the specular peak for high glossy surfaces

NASA Astrophysics Data System (ADS)

Obein, Gaël.; Ouarets, Shiraz; Ged, Guillaume

2014-02-01

Gloss is the second most relevant visual attribute of a surface beside its colour. While the colour originates from the wavelength repartition of the reflected light, gloss originates from its angular distribution. When an observer is asked to evaluate the gloss of a surface, he always first orientate his eyes along the specular direction before lightly tilting the examined sample. This means that gloss is located in and around the specular direction, in a peak that is called the specular peak. On the one hand, this peak is flat and broad on matte surfaces on the other hand, it is narrow and sharp on high gloss surfaces. For the late ones, the FWHM of the specular peak is less than 2° which can be quite difficult to measure. We developed a dedicated facility capable of measuring specular peak with a FWHM up to 0,1 °. We measured the evolution of the peak according to the angle of illumination and the specular gloss of the sample in the restricted field of very glossy surface. The facility and peaks measured are presented in the paper. The next step will be to identify the correlations between the peak and the roughness of the sample.

Brain Function Overlaps When People Observe Emblems, Speech, and Grasping

PubMed Central

Andric, Michael; Solodkin, Ana; Buccino, Giovanni; Goldin-Meadow, Susan; Rizzolatti, Giacomo; Small, Steven L.

2013-01-01

A hand grasping a cup or gesturing ‘thumbs-up’, while both manual actions, have different purposes and effects. Grasping directly affects the cup, whereas gesturing ‘thumbs-up’ has an effect through an implied verbal (symbolic) meaning. Because grasping and emblematic gestures (‘emblems’) are both goal-oriented hand actions, we pursued the hypothesis that observing each should evoke similar activity in neural regions implicated in processing goal-oriented hand actions. However, because emblems express symbolic meaning, observing them should also evoke activity in regions implicated in interpreting meaning, which is most commonly expressed in language. Using fMRI to test this hypothesis, we had participants watch videos of an actor performing emblems, speaking utterances matched in meaning to the emblems, and grasping objects. Our results show that lateral temporal and inferior frontal regions respond to symbolic meaning, even when it is expressed by a single hand action. In particular, we found that left inferior frontal and right lateral temporal regions are strongly engaged when people observe either emblems or speech. In contrast, we also replicate and extend previous work that implicates parietal and premotor responses in observing goal-oriented hand actions. For hand actions, we found that bilateral parietal and premotor regions are strongly engaged when people observe either emblems or grasping. These findings thus characterize converging brain responses to shared features (e.g., symbolic or manual), despite their encoding and presentation in different stimulus modalities. PMID:23583968

Auto Mechanics I. Learning Activity Packets (LAPs). Section A--Orientation and Safety.

ERIC Educational Resources Information Center

Oklahoma State Board of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This document contains seven learning activity packets (LAPs) that outline the study activities for the orientation and safety instructional area for an Auto Mechanics I course. The seven LAPs cover the following topics: orientation, safety, hand tools, arc welding, oxyacetylene cutting, oxyacetylene fusion welding, and oxyacetylene braze welding.…

Effects of build orientation and element partitioning on microstructure and mechanical properties of biomedical Ti-6Al-4V alloy produced by laser sintering.

PubMed

Mengucci, P; Gatto, A; Bassoli, E; Denti, L; Fiori, F; Girardin, E; Bastianoni, P; Rutkowski, B; Czyrska-Filemonowicz, A; Barucca, G

2017-07-01

Direct Metal Laser Sintering (DMLS) technology was used to produce tensile and flexural samples based on the Ti-6Al-4V biomedical composition. Tensile samples were produced in three different orientations in order to investigate the effect of building direction on the mechanical behavior. On the other hand, flexural samples were submitted to thermal treatments to simulate the firing cycle commonly used to veneer metallic devices with ceramics in dental applications. Roughness and hardness measurements as well as tensile and flexural mechanical tests were performed to study the mechanical response of the alloy while X-ray diffraction (XRD), electron microscopy (SEM, TEM, STEM) techniques and microanalysis (EDX) were used to investigate sample microstructure. Results evidenced a difference in the mechanical response of tensile samples built in orthogonal directions. In terms of microstructure, samples not submitted to the firing cycle show a single phase acicular α' (hcp) structure typical of metal parts subject to high cooling rates. After the firing cycle, samples show a reduction of hardness and strength due to the formation of laths of the β (bcc) phase at the boundaries of the primary formed α' plates as well as to lattice parameters variation of the hcp phase. Element partitioning during the firing cycle gives rise to high concentration of V atoms (up to 20wt%) at the plate boundaries where the β phase preferentially forms. Copyright © 2017 Elsevier Ltd. All rights reserved.

Quenchable compressed graphite synthesized from neutron-irradiated highly oriented pyrolytic graphite in high pressure treatment at 1500 °C

NASA Astrophysics Data System (ADS)

Niwase, Keisuke; Terasawa, Mititaka; Honda, Shin-ichi; Niibe, Masahito; Hisakuni, Tomohiko; Iwata, Tadao; Higo, Yuji; Hirai, Takeshi; Shinmei, Toru; Ohfuji, Hiroaki; Irifune, Tetsuo

2018-04-01

The super hard material of "compressed graphite" (CG) has been reported to be formed under compression of graphite at room temperature. However, it returns to graphite under decompression. Neutron-irradiated graphite, on the other hand, is a unique material for the synthesis of a new carbon phase, as reported by the formation of an amorphous diamond by shock compression. Here, we investigate the change of structure of highly oriented pyrolytic graphite (HOPG) irradiated with neutrons to a fluence of 1.4 × 1024 n/m2 under static pressure. The neutron-irradiated HOPG sample was compressed to 15 GPa at room temperature and then the temperature was increased up to 1500 °C. X-ray diffraction, high-resolution transmission electron microscopy on the recovered sample clearly showed the formation of a significant amount of quenchable-CG with ordinary graphite. Formation of hexagonal and cubic diamonds was also confirmed. The effect of irradiation-induced defects on the synthesis of quenchable-CG under high pressure and high temperature treatment was discussed.

Differential adjustment of Ashkenazi versus Sephardi Jews to a forced relocation: the Israeli withdrawal from the Sinai.

PubMed

Steinglass, P; De-Nour, A K

1988-02-01

This report focuses on a set of findings regarding differential adjustment patterns of Ashkenazi (Western) versus Sephardi (Oriental) Jews when faced with a stressful life event. The event in question was the wholesale evacuation of the Israeli Sinai community of Ophira (Sharm-el-Sheik in Arabic) when the Sinai was handed over to Egyptian control in March 1982. Immediately prior to the evacuation, the authors went down to Ophira to carry out a study of patterns of psychosocial adjustment of community residents designed to assess the relationships between individual coping styles, personal network characteristics, levels of psychological distress, and adequacy of social adjustment. Data were collected from a sample of 66 adult civilian community residents (31 men; 35 women), a sample that by coincidence was composed of two reputedly quite different ethnic subgroups: Israeli-born Jews whose parents were of European origin; and "Oriental" Jews, i.e., immigrants from Moslem countries. This fortuitous mix allowed us to carry out the analyses exploring ethnic differences in adjustment and their possible causes that are to be presented in this paper.

Structural Orientations Adjacent to Some Colorado Geothermal Systems

DOE Data Explorer

Richard

2012-02-01

Structural orientations (fractures, joints, faults, lineaments, bedding orientations, etc.) were collected with a standard Brunton compass during routine field examinations of geothermal phenomena in Colorado. Often multiple orientations were taken from one outcrop. Care was taken to ensure outcrops were "in place". Point data was collected with a hand-held GPS unit. The structural data is presented both as standard quadrant measurements and in format suitable for ESRI symbology

Ten-dimensional anthropomorphic arm control in a human brain-machine interface: difficulties, solutions, and limitations

NASA Astrophysics Data System (ADS)

Wodlinger, B.; Downey, J. E.; Tyler-Kabara, E. C.; Schwartz, A. B.; Boninger, M. L.; Collinger, J. L.

2015-02-01

Objective. In a previous study we demonstrated continuous translation, orientation and one-dimensional grasping control of a prosthetic limb (seven degrees of freedom) by a human subject with tetraplegia using a brain-machine interface (BMI). The current study, in the same subject, immediately followed the previous work and expanded the scope of the control signal by also extracting hand-shape commands from the two 96-channel intracortical electrode arrays implanted in the subject’s left motor cortex. Approach. Four new control signals, dictating prosthetic hand shape, replaced the one-dimensional grasping in the previous study, allowing the subject to control the prosthetic limb with ten degrees of freedom (three-dimensional (3D) translation, 3D orientation, four-dimensional hand shaping) simultaneously. Main results. Robust neural tuning to hand shaping was found, leading to ten-dimensional (10D) performance well above chance levels in all tests. Neural unit preferred directions were broadly distributed through the 10D space, with the majority of units significantly tuned to all ten dimensions, instead of being restricted to isolated domains (e.g. translation, orientation or hand shape). The addition of hand shaping emphasized object-interaction behavior. A fundamental component of BMIs is the calibration used to associate neural activity to intended movement. We found that the presence of an object during calibration enhanced successful shaping of the prosthetic hand as it closed around the object during grasping. Significance. Our results show that individual motor cortical neurons encode many parameters of movement, that object interaction is an important factor when extracting these signals, and that high-dimensional operation of prosthetic devices can be achieved with simple decoding algorithms. ClinicalTrials.gov Identifier: NCT01364480.

Representative marketing-oriented study on implants in the Austrian population. II. Implant acceptance, patient-perceived cost and patient satisfaction.

PubMed

Tepper, Gabor; Haas, Robert; Mailath, Georg; Teller, Christoph; Bernhart, Thomas; Monov, Gabriel; Watzek, Georg

2003-10-01

Oral implantology is an established subspecialty of restorative dental and oral surgery. While an extensive body of evidence on the fundamentals of osseointegration and associated factors has been published, marketing-oriented analyses based on representative public opinion polls of implant acceptance, patient-perceived cost and patient satisfaction are scarce. In this study, an attempt was made to address these points by questioning a representative sample of 1000 adults in the household setting. The interviewees were presented with 14 questions. Of those familiar with implants as one of the treatment alternatives, 61% reported they would accept implants if the need arose. Implant acceptance was highest among males and interviewees below the age of 30 years. The interest in implants increased with increasing family incomes. Four percent of those questioned already had implants. Twenty-five percent knew someone who had undergone implant treatment. All those questioned found implant-supported rehabilitation to be very expensive. Many of them blamed the dentists for the high cost. One detail was particularly evident: satisfaction among implanted patients was clearly higher than satisfaction rates perceived by them from what they were told about implants by others. First-hand experiences with implants proved to be less biased than reported second-hand information.

Kinematic hand parameters in front crawl at different paces of swimming.

PubMed

Samson, Mathias; Monnet, Tony; Bernard, Anthony; Lacouture, Patrick; David, Laurent

2015-11-05

The aim of this study was to investigate the evolution of kinematic hand parameters (sweepback angle, angle of attack, velocity, acceleration and orientation of the hand relative to the absolute coordinate system) throughout an aquatic stroke and to study the possible modifications caused by a variation of the swimming pace. Seventeen competitive swimmers swam at long distance, middle distance and sprint paces. Parameters were calculated from the trajectory of seven markers on the hand measured with an optoelectronic system. Results showed that kinematic hand parameters evolve differently depending on the pace. Angle of attack, sweepback angle, acceleration and orientation of the hand do not vary significantly. The velocity of the hand increases when the pace increases, but only during the less propulsive phases (entry and stretch and downsweep to catch). The more the pace increases and the more the absolute durations of the entry and stretch and downsweep to catch phases decrease. Absolute durations of the insweep and upsweep phases remain constant. During these phases, the propulsive hand forces calculated do not vary significantly when the pace increases. The increase of swimming pace is then explained by the swimmer's capacity to maintain propulsive phases rather than increasing the force generation within each cycle. Copyright © 2015 Elsevier Ltd. All rights reserved.

Effects of hand orientation on motor imagery--event related potentials suggest kinesthetic motor imagery to solve the hand laterality judgment task.

PubMed

Jongsma, Marijtje L A; Meulenbroek, Ruud G J; Okely, Judith; Baas, C Marjolein; van der Lubbe, Rob H J; Steenbergen, Bert

2013-01-01

Motor imagery (MI) refers to the process of imagining the execution of a specific motor action without actually producing an overt movement. Two forms of MI have been distinguished: visual MI and kinesthetic MI. To distinguish between these forms of MI we employed an event related potential (ERP) study to measure interference effects induced by hand orientation manipulations in a hand laterality judgement task. We hypothesized that this manipulation should only affect kinesthetic MI but not visual MI. The ERPs elicited by rotated hand stimuli contained the classic rotation related negativity (RRN) with respect to palm view stimuli. We observed that laterally rotated stimuli led to a more marked RRN than medially rotated stimuli. This RRN effect was observed when participants had their hands positioned in either a straight (control) or an inward rotated posture, but not when their hands were positioned in an outward rotated posture. Posture effects on the ERP-RRN have not previously been studied. Apparently, a congruent hand posture (hands positioned in an outward rotated fashion) facilitates the judgement of the otherwise more demanding laterally rotated hand stimuli. These ERP findings support a kinesthetic interpretation of MI involved in solving the hand laterality judgement task. The RRN may be used as a non-invasive marker for kinesthetic MI and seems useful in revealing the covert behavior of MI in e.g. rehabilitation programs.

Dextrous robot hands

NASA Technical Reports Server (NTRS)

Venkataraman, Subramanian T. (Editor); Iberall, Thea (Editor)

1990-01-01

Recent studies of human hand function and their implications for the design of robot hands are discussed in reviews and reports. Topics addressed include human grasp choice and robotic grasp analysis, opposition space and human prehension, coordination in normal and prosthetic reaching, and intelligent exploration by the human hand. Consideration is given to a task-oriented dextrous manipulation architecture, the control architecture for the Belgrade/USC hand, the analysis of multifingered grasping and manipulation, and tactile sensing for shape interpretation. Diagrams, graphs, and photographs are provided.

Right Hand Presence Modulates Shifts of Exogenous Visuospatial Attention in Near Perihand Space

ERIC Educational Resources Information Center

Lloyd, Donna M.; Azanon, Elena; Poliakoff, Ellen

2010-01-01

To investigate attentional shifting in perihand space, we measured performance on a covert visual orienting task under different hand positions. Participants discriminated visual shapes presented on a screen and responded using footpedals placed under their right foot. With the right hand positioned by the right side of the screen, mean cueing…

Effects of High-Frequency Repetitive Transcranial Magnetic Stimulation Combined with Task-Oriented Mirror Therapy Training on Hand Rehabilitation of Acute Stroke Patients.

PubMed

Kim, Jinhong; Yim, Jongeun

2018-02-06

BACKGROUND Impairments of hand function make it difficult to perform daily life activities and to return to work. The aim of this study was to investigate the effect of high-frequency repetitive transcranial magnetic stimulation (HF-rTMS) combined with task-oriented mirror therapy (TOMT) on hand rehabilitation in acute stroke patients. MATERIAL AND METHODS Twenty subacute stroke patients in the initial stages (<3 months) participated in the study. Subjects were allocated to 2 groups: the experimental group received HF-rTMS + TOMT and the control group received HF-rTMS. TOMT training was conducted in 10 sessions over 2 weeks for 30 min. rTMS was applied at a 20 Hz frequency over the hand motor area in the cortex of the affected hemisphere for 15 min. Outcomes, including motor-evoked potential (MEP), pinch grip, hand grip, and box and block test, were measured before and after training. RESULTS Significant improvements in the MEP and hand function variables were observed in both groups (p<0.05). In particular, hand functions (pinch grip and box and block test) were significantly different between the 2 groups (p<0.05). CONCLUSIONS HF-rTMS combined with TOMT had a positive effect on hand function and can be used for the rehabilitation of precise hand movements in acute stroke patients.

The influence of grasping habits and object orientation on motor planning in children and adults.

PubMed

Jovanovic, Bianca; Schwarzer, Gudrun

2017-12-01

We investigated the influence of habitual grasp strategies and object orientation on motor planning in 3-year-olds and 4- to 5-year-old children and adults. Participants were required to rotate different vertically oriented objects around 180°. Usually, adults perform this task by grasping objects with an awkward grip (thumb and index finger pointing downward) at the beginning of the movement, in order to finish it with a comfortable hand position. This pattern corresponds to the well-known end-state comfort effect (ESC) in grasp planning. The presented objects were associated with different habitual grasp orientations that either corresponded with the grasp direction required to reach end-state comfort (downward) or implied a contrary grasp orientation (upward). Additionally, they were presented either in their usual, canonical orientation (e.g., shovel with the blade oriented downward versus cup with its opening oriented upward) or upside down. As dependent variable we analyzed the number of grips conforming to the end-state comfort principle (ESC score) realized in each object type and orientation condition. The number of grips conforming to ESC strongly increased with age. In addition, the extent to which end-state comfort was considered was influenced by the actual orientation of the objects' functional parts. Thus, in all age-groups the ESC score was highest when the functional parts of the objects were oriented downward (shovel presented canonically with blade pointing downward, cup presented upside down) and corresponded to the hand orientation needed to realize ESC. © 2017 Wiley Periodicals, Inc.

The effects of instruction and hand dominance on grip-to-load force coordination in manipulation tasks.

PubMed

Jin, Xin; Uygur, Mehmet; Getchell, Nancy; Hall, Susan J; Jaric, Slobodan

2011-10-31

The force applied upon a vertically oriented hand-held object could be decomposed into two orthogonal and highly coordinated components: the grip force (GF; the component perpendicular to the hand-object contact area that provides friction) and the load force (LF; the parallel component that can move the object or support the body). The aim of this study was to investigate the underexplored effects of task instruction and hand dominance on GF-LF coordination. Sixteen right-handed subjects performed bimanual manipulation against a horizontally oriented instrumented device under different sets of instructions. The tasks involved exertion of ramp-and-hold or oscillation patterns of LF performed symmetrically with two hands, while the instructions regarding individual actions were either similar (pull with both hands) or dissimilar (pull with one hand and hold with another). The results revealed that the instruction "to pull" leads to higher indices of GF-LF coordination than the instruction "to hold", as evidenced by a lower GF-LF ratio, higher GF-LF coupling, and higher GF modulation. The only effect of hand dominance was a moderate time lag of GF relative to LF changes observed in the non-dominant hand. We conclude that the instructions could play an important role in GF-LF coordination and, therefore, they should be taken into account when exploring or routinely testing hand function. Additionally, the results suggest that the neural control of GF of the non-dominant hand could involve some feedback mechanisms. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Kinematic characteristics of the stroke and orientation of the hand during front crawl resisted swimming.

PubMed

Gourgoulis, Vassilios; Antoniou, Panagiotis; Aggeloussis, Nikolaos; Mavridis, Georgios; Kasimatis, Panagiotis; Vezos, Nikolaos; Boli, Alexia; Mavromatis, Georgios

2010-09-01

The aim of this study was to examine the acute effect of front crawl sprint resisted swimming with different added resistances on the kinematic characteristics of the stroke and the orientation of the hand. Ten female swimmers swam four maximal trials (25 m) with small, moderate, large, and no added resistance respectively. Four camcorders were used to record the underwater motion of the right hand and digitizing was undertaken using the Ariel Performance Analysis System. Stroke rate, the stroke length, and mean swimming velocity were significantly decreased, whereas the total duration of the stroke and the relative duration of the pull and push phases were significantly increased during resisted swimming. The increase in the total duration of the stroke was accompanied by an increase in absolute pull length, while no alterations were observed in relative pull length or medial-lateral displacements of the hand. Moreover, the mean resultant velocity of the hand, as well as the pitch and the sweepback angles of the hand were not modified. In conclusion, resisted swimming appears to be a specific form of training, at least regarding its acute effect, although long-term effects should be investigated further.

Effective Propulsion in Swimming: Grasping the Hydrodynamics of Hand and Arm Movements.

PubMed

van Houwelingen, Josje; Schreven, Sander; Smeets, Jeroen B J; Clercx, Herman J H; Beek, Peter J

2017-02-01

In this paper, a literature review is presented regarding the hydrodynamic effects of different hand and arm movements during swimming with the aim to identify lacunae in current methods and knowledge, and to distil practical guidelines for coaches and swimmers seeking to increase swimming speed. Experimental and numerical studies are discussed, examining the effects of hand orientation, thumb position, finger spread, sculling movements, and hand accelerations during swimming, as well as unsteady properties of vortices due to changes in hand orientation. Collectively, the findings indicate that swimming speed may be increased by avoiding excessive sculling movements and by spreading the fingers slightly. In addition, it appears that accelerating the hands rather than moving them at constant speed may be beneficial, and that (in front crawl swimming) the thumb should be abducted during entry, catch, and upsweep, and adducted during the pull phase. Further experimental and numerical research is required to confirm these suggestions and to elucidate their hydrodynamic underpinnings and identify optimal propulsion techniques. To this end, it is necessary that the dynamical motion and resulting unsteady effects are accounted for, and that flow visualization techniques, force measurements, and simulations are combined in studying those effects.

The Sensorimotor System Can Sculpt Behaviorally Relevant Representations for Motor Learning

PubMed Central

2016-01-01

Abstract The coordinate system in which humans learn novel motor skills is controversial. The representation of sensorimotor skills has been extensively studied by examining generalization after learning perturbations specifically designed to be ambiguous as to their coordinate system. Recent studies have found that learning is not represented in any simple coordinate system and can potentially be accounted for by a mixed representation. Here, instead of probing generalization, which has led to conflicting results, we examine whether novel dynamics can be learned when explicitly and unambiguously presented in particular coordinate systems. Subjects performed center–out reaches to targets in the presence of a force field, while varying the orientation of their hand (i.e., the wrist angle) across trials. Different groups of subjects experienced force fields that were explicitly presented either in Cartesian coordinates (field independent of hand orientation), in object coordinates (field rotated with hand orientation), or in anti-object coordinates (field rotated counter to hand orientation). Subjects learned to represent the dynamics when presented in either Cartesian or object coordinates, learning these as well as an ambiguous force field. However, learning was slower for the object-based dynamics and substantially impaired for the anti-object presentation. Our results show that the motor system is able to tune its representation to at least two natural coordinate systems but is impaired when the representation of the task does not correspond to a behaviorally relevant coordinate system. Our results show that the motor system can sculpt its representation through experience to match those of natural tasks. PMID:27588304

Fronto-Parietal Brain Responses to Visuotactile Congruence in an Anatomical Reference Frame

PubMed Central

Limanowski, Jakub; Blankenburg, Felix

2018-01-01

Spatially and temporally congruent visuotactile stimulation of a fake hand together with one’s real hand may result in an illusory self-attribution of the fake hand. Although this illusion relies on a representation of the two touched body parts in external space, there is tentative evidence that, for the illusion to occur, the seen and felt touches also need to be congruent in an anatomical reference frame. We used functional magnetic resonance imaging and a somatotopical, virtual reality-based setup to isolate the neuronal basis of such a comparison. Participants’ index or little finger was synchronously touched with the index or little finger of a virtual hand, under congruent or incongruent orientations of the real and virtual hands. The left ventral premotor cortex responded significantly more strongly to visuotactile co-stimulation of the same versus different fingers of the virtual and real hand. Conversely, the left anterior intraparietal sulcus responded significantly more strongly to co-stimulation of different versus same fingers. Both responses were independent of hand orientation congruence and of spatial congruence of the visuotactile stimuli. Our results suggest that fronto-parietal areas previously associated with multisensory processing within peripersonal space and with tactile remapping evaluate the congruence of visuotactile stimulation on the body according to an anatomical reference frame. PMID:29556183

Fronto-Parietal Brain Responses to Visuotactile Congruence in an Anatomical Reference Frame.

PubMed

Limanowski, Jakub; Blankenburg, Felix

2018-01-01

Spatially and temporally congruent visuotactile stimulation of a fake hand together with one's real hand may result in an illusory self-attribution of the fake hand. Although this illusion relies on a representation of the two touched body parts in external space, there is tentative evidence that, for the illusion to occur, the seen and felt touches also need to be congruent in an anatomical reference frame. We used functional magnetic resonance imaging and a somatotopical, virtual reality-based setup to isolate the neuronal basis of such a comparison. Participants' index or little finger was synchronously touched with the index or little finger of a virtual hand, under congruent or incongruent orientations of the real and virtual hands. The left ventral premotor cortex responded significantly more strongly to visuotactile co-stimulation of the same versus different fingers of the virtual and real hand. Conversely, the left anterior intraparietal sulcus responded significantly more strongly to co-stimulation of different versus same fingers. Both responses were independent of hand orientation congruence and of spatial congruence of the visuotactile stimuli. Our results suggest that fronto-parietal areas previously associated with multisensory processing within peripersonal space and with tactile remapping evaluate the congruence of visuotactile stimulation on the body according to an anatomical reference frame.

Cup waveguide antenna with integrated polarizer and OMT

NASA Technical Reports Server (NTRS)

Kory, Carol (Inventor); Acosta, Roberto J. (Inventor); Lambert, Kevin M. (Inventor)

2011-01-01

A cup waveguide antenna with integrated polarizer and OMT for simultaneously communicating left and right hand circularly polarized electromagnetic waves is adjustable to obtain efficient propagation and reception of electromagnetic waves. The antenna includes a circular waveguide having an orthomode transducer utilizing first and second pins longitudinally spaced apart and oriented orthogonally with respect to each other. Six radially-oriented adjustable polarizer screws extend from the exterior to the interior of the waveguide. A septum intermediate the first and second pins is aligned with the first pin. Adjustment of the polarizer screws enables maximized propagation of and/or response to left hand circularly polarized electromagnetic waves by the first pin while simultaneously enabling maximized propagation of and/or response to right hand circularly polarized electromagnetic waves by the second pin.

[Management and orientation of a hand laceration].

PubMed

Masmejean, Emmanuel

2013-11-01

The good management and orientation of a hand laceration by the general physician is essential. Anatomical knowledge help to judge, after examination, the opportunity for surgery exploration with local anesthesia. Serious stakes are prognostic and economics. The conclusion identifies three clinical pictures : simple superf cial wound requiring a simple clinical control 2 days follow-up, the dubious wound that need to be sent to a specialized center, and the wound requiring care in an emergency hand unit. Extremely urgent wounds are devascularization, amputation and the pressure injection . Bites and wounds on a tendon way require surgical exploration. Bandage should be as simple as possible in order to allow early motion. No antibiotic is given preventively exept for bite, open fractures and/or delay of treatment. Outpatient surgery under loca anesthesia simplifies management.

The TINS Lecture. The parietal association cortex in depth perception and visual control of hand action.

PubMed

Sakata, H; Taira, M; Kusunoki, M; Murata, A; Tanaka, Y

1997-08-01

Recent neurophysiological studies in alert monkeys have revealed that the parietal association cortex plays a crucial role in depth perception and visually guided hand movement. The following five classes of parietal neurons covering various aspects of these functions have been identified: (1) depth-selective visual-fixation (VF) neurons of the inferior parietal lobule (IPL), representing egocentric distance; (2) depth-movement sensitive (DMS) neurons of V5A and the ventral intraparietal (VIP) area representing direction of linear movement in 3-D space; (3) depth-rotation-sensitive (RS) neurons of V5A and the posterior parietal (PP) area representing direction of rotary movement in space; (4) visually responsive manipulation-related neurons (visual-dominant or visual-and-motor type) of the anterior intraparietal (AIP) area, representing 3-D shape or orientation (or both) of objects for manipulation; and (5) axis-orientation-selective (AOS) and surface-orientation-selective (SOS) neurons in the caudal intraparietal sulcus (cIPS) sensitive to binocular disparity and representing the 3-D orientation of the longitudinal axes and flat surfaces, respectively. Some AOS and SOS neurons are selective in both orientation and shape. Thus the dorsal visual pathway is divided into at least two subsystems, V5A, PP and VIP areas for motion vision and V6, LIP and cIPS areas for coding position and 3-D features. The cIPS sends the signals of 3-D features of objects to the AIP area, which is reciprocally connected to the ventral premotor (F5) area and plays an essential role in matching hand orientation and shaping with 3-D objects for manipulation.

Lidar-based fracture characterization: An outcrop-scale study of the Woodford Shale, McAlister Shale Pit, Oklahoma

NASA Astrophysics Data System (ADS)

Hanzel, Jason

The use of lidar (light detection and ranging), a remote sensing tool based on principles of laser optometry, in mapping complex, multi-scale fracture networks had not been rigorously tested prior to this study despite its foreseeable utility in interpreting rock fabric with imprints of complex tectonic evolution. This thesis demonstrates lidar-based characterization of the Woodford Shale where intense fracturing could be due to both tectonism and mineralogy. The study area is the McAlister Shale Pit in south-central Oklahoma where both the upper and middle sections of the Woodford Shale are exposed and can be lidar-mapped. Lidar results are validated using hand-measured strike and dips of fracture planes, thin sections and mineral chemistry of selected samples using X-ray diffraction (XRD). Complexity of the fracture patterns as well as inaccessibility of multiple locations within the shale pit makes hand-measurement prone to errors and biases; lidar provides an opportunity for less biased and more efficient field mapping. Fracture mapping with lidar is a multi-step process. The lidar data are converted from point clouds into a mesh through triangulation. User-defined parameters such as size and orientation of the individual triangular elements are then used to group similar elements into surfaces. The strike and dip attribute of the simulated surfaces are visualized in an equal area lower hemisphere projection stereonet. Three fracture sets were identified in the upper and middle sections with common orientation but substantially different spatial density. Measured surface attributes and spatial density relations from lidar were validated using their hand-measured counterparts. Thin section analysis suggests that high fracture density in the upper Woodford measured by both the lidar and the hand-measured data could be due to high quartz. A significant finding of this study is the reciprocal relation between lidar intensity and gamma-ray (GR), which is generally used to infer outcrop mineralogy. XRD analysis of representative samples along the common profiles show that both GR and lidar intensity were influenced by the same minerals in essentially opposite ways. Results strongly suggest that the lidar cannot only remotely map the geomorphology, but also the relative mineralogical variations to the first order of approximation.

Positron Interactions with Oriented Polymers and with Chiral Quartz Crystals

NASA Astrophysics Data System (ADS)

Wu, Fei

Positron annihilation in various materials has been applied to characterize microstructure for decades. In this work, PALS was used to study material nanostructure, with a focus on the size and density of free volume and hole relaxation properties in polycarbonate (PC) and polymethylmethacrylate (PMMA); fundamental studies of polarized positron interaction with chiral crystals were also studied. Free volume relaxation in PC and PMMA with different levels of simple shear orientation was studied by PALS. Effects of applied pressure on the free volume recovery were evaluated. Combining the bulk- and pressure-dependent PALS analyses, the removal of applied pressure led to free-volume relaxation in all samples studied. The alignment of the polymer chains and free-volume holes imposes molecular restrictions on the molecular mobility of both PC and PMMA in their glassy states. Results indicated that the relaxation of the free volume holes at temperatures below glass transition is mostly reversible. Longitudinally polarized positron particles were used to reveal asymmetric interactions in chiral quartz crystals. Experimental results showed a significant intensity difference in free positronium annihilation for left handed (LH) and right handed (RH) chiral quartz crystals. Doppler broadening energy spectra (DBES) of z-cut LH or RH quartz disks at different angles were also measured by an "S parameter" to probe the observed difference. It was found that obtained annihilation energy difference of DBES was in agreement with the result of positron annihilation in bulk chiral crystals. PALS was used to compare different orientations and confirm asymmetric interactions in natural versus synthetic quartz LH and RH crystals in z and non-z orientations. Significant lifetime and intensity differences in free positronium annihilation for LH and RH quartz crystals were observed. The trend was found to be same in the related crystallographic orientations of the LH or RH crystals; the direction of incident positrons, z or non-z, did not affect the observed differences in lifetime and intensity trends. The results confirmed the existence of differential interactions of positronium with the asymmetric lattice structures of LH and RH quartz crystals.

The role of hand of error and stimulus orientation in the relationship between worry and error-related brain activity: Implications for theory and practice.

PubMed

Lin, Yanli; Moran, Tim P; Schroder, Hans S; Moser, Jason S

2015-10-01

Anxious apprehension/worry is associated with exaggerated error monitoring; however, the precise mechanisms underlying this relationship remain unclear. The current study tested the hypothesis that the worry-error monitoring relationship involves left-lateralized linguistic brain activity by examining the relationship between worry and error monitoring, indexed by the error-related negativity (ERN), as a function of hand of error (Experiment 1) and stimulus orientation (Experiment 2). Results revealed that worry was exclusively related to the ERN on right-handed errors committed by the linguistically dominant left hemisphere. Moreover, the right-hand ERN-worry relationship emerged only when stimuli were presented horizontally (known to activate verbal processes) but not vertically. Together, these findings suggest that the worry-ERN relationship involves left hemisphere verbal processing, elucidating a potential mechanism to explain error monitoring abnormalities in anxiety. Implications for theory and practice are discussed. © 2015 Society for Psychophysiological Research.

Microstructure and thermal characterization of dense bone and metals for biomedical use

NASA Astrophysics Data System (ADS)

Rodríguez, G. Peña; Calderón, A.; Hernández, R. A. Muñoz; Orea, A. Cruz; Méndez, M.; Sinencio, F. Sánchez

2000-10-01

We present a microstructural study and thermal diffusivity measurements at room temperature in two different sections of bull dense bone, bull bone and commercial hydroxyapatite, the last two in powder form. A comparison was realised between these measured values and those obtained from metallic samples frequently used in implants, as high purity titanium and 316L stainless steel. Our results show that the porosity and its orientation in the bone are two important factors for the heat flux through the bone. On the other hand, we obtained that the hydroxyapatite, in compact powder form, presents a thermal diffusivity value close to those obtained for the samples of bone which gives a good thermal agreement between these materials. Finally, it was obtained at one order of magnitude difference between the thermal diffusivity values of metallic samples and those corresponding values to bone and hydroxyapatite being this difference greater in titanium than in stainless steel.

Service Learning: An Action Oriented Program Evaluation

ERIC Educational Resources Information Center

Kelley, George

2013-01-01

Service learning is an academic discipline that provides students with "hands-on" opportunities for developing skills in real-world, community-based projects that serve and benefit community members. This dissertation reflects an action-oriented process for improving the quality of the Service Learning Program at City University of…

Sex differences in face processing are mediated by handedness and sexual orientation.

PubMed

Brewster, Paul W H; Mullin, Caitlin R; Dobrin, Roxana A; Steeves, Jennifer K E

2011-03-01

Previous research has demonstrated sex differences in face processing at both neural and behavioural levels. The present study examined the role of handedness and sexual orientation as mediators of this effect. We compared the performance of LH (left-handed) and RH (right-handed) heterosexual and homosexual male and female participants on a face recognition memory task. Our main findings were that homosexual males have better face recognition memory than both heterosexual males and homosexual women. We also demonstrate better face processing in women than in men. Finally, LH heterosexual participants had better face recognition than LH homosexual participants and also tended to be better than RH heterosexual participants. These findings are consistent with differences in the organisation and laterality of face-processing mechanisms as a function of sex, handedness, and sexual orientation.

Orientation and mobility training for partially-sighted older adults using an identification cane: a systematic review

PubMed Central

Ballemans, Judith; Kempen, Gertrudis IJM; Zijlstra, GA Rixt

2011-01-01

Objective: This study aimed to provide an overview of the development, content, feasibility, and effectiveness of existing orientation and mobility training programmes in the use of the identification cane. Data sources: A systematic bibliographic database search in PubMed, PsychInfo, ERIC, CINAHL and the Cochrane Library was performed, in combination with the expert consultation (n = 42; orientation and mobility experts), and hand-searching of reference lists. Review methods: Selection criteria included a description of the development, the content, the feasibility, or the effectiveness of orientation and mobility training in the use of the identification cane. Two reviewers independently agreed on eligibility and methodological quality. A narrative/qualitative data analysis method was applied to extract data from obtained documents. Results: The sensitive database search and hand-searching of reference lists revealed 248 potentially relevant abstracts. None met the eligibility criteria. Expert consultation resulted in the inclusion of six documents in which the information presented on the orientation and mobility training in the use of the identification cane was incomplete and of low methodological quality. Conclusion: Our review of the literature showed a lack of well-described protocols and studies on orientation and mobility training in identification cane use. PMID:21795405

Putative Androgen Exposure and Sexual Orientation: Cross-Cultural Evidence Suggesting a Modified Neurohormonal Theory.

PubMed

Ellis, Lee; Lykins, Amy; Hoskin, Anthony; Ratnasingam, Malini

2015-12-01

According to neurohormonal theory, prenatal androgens are key determinants of sexual orientation. As a reputed marker for prenatal androgens, the 2D:4D finger length ratio has been used in more than a dozen studies to test the hypothesis that prenatal androgens influence sexual orientation. Findings have been very inconsistent. The present study sought to retest the hypothesis that 2D:4D and sexual orientation are related is a manner consistent with neurohormonal theory. A 2D:4D measure (of the right hand) along with four additional somatic markers of androgen exposure (height, physical strength, muscularity, and athletic ability) with samples of college students in Malaysia (N = 2,058) and the United States (N = 2,511). The five androgen measures were factor analyzed, resulting in a two-factor solution: Factor 1 consisted of strength, muscularity, and athletic ability (the muscular coordination factor), and Factor 2 was comprised of the r2D:4D and adult height (the bone growth factor). Sexual orientation was measured by asking each respondent the extent to which they were sexually attracted to males and the extent to which they were sexually attracted to females, both on 11-point scales. When the countries and sexes were analyzed separately, neither the r2D:4D measure nor Factor 2 correlated with sexual orientation to significant degrees. Instead, it was the muscular coordination factor that correlated the best. Support was found for the hypothesis that prenatal androgens influence sexual orientation, but the nature of these influences was more complex than neurohormonal theory predicted. A modified theory is needed and presented to accommodate the results from this study. © 2015 International Society for Sexual Medicine.

3-D microstructure of olivine in complex geological materials reconstructed by correlative X-ray μ-CT and EBSD analyses.

PubMed

Kahl, W-A; Dilissen, N; Hidas, K; Garrido, C J; López-Sánchez-Vizcaíno, V; Román-Alpiste, M J

2017-11-01

We reconstruct the 3-D microstructure of centimetre-sized olivine crystals in rocks from the Almirez ultramafic massif (SE Spain) using combined X-ray micro computed tomography (μ-CT) and electron backscatter diffraction (EBSD). The semidestructive sample treatment involves geographically oriented drill pressing of rocks and preparation of oriented thin sections for EBSD from the μ-CT scanned cores. The μ-CT results show that the mean intercept length (MIL) analyses provide reliable information on the shape preferred orientation (SPO) of texturally different olivine groups. We show that statistical interpretation of crystal preferred orientation (CPO) and SPO of olivine becomes feasible because the highest densities of the distribution of main olivine crystal axes from EBSD are aligned with the three axes of the 3-D ellipsoid calculated from the MIL analyses from μ-CT. From EBSD data we distinguish multiple CPO groups and by locating the thin sections within the μ-CT volume, we assign SPO to the corresponding olivine crystal aggregates, which confirm the results of statistical comparison. We demonstrate that the limitations of both methods (i.e. no crystal orientation data in μ-CT and no spatial information in EBSD) can be overcome, and the 3-D orientation of the crystallographic axes of olivines from different orientation groups can be successfully correlated with the crystal shapes of representative olivine grains. Through this approach one can establish the link among geological structures, macrostructure, fabric and 3-D SPO-CPO relationship at the hand specimen scale even in complex, coarse-grained geomaterials. © 2017 The Authors Journal of Microscopy © 2017 Royal Microscopical Society.

Learned Manipulation at Unconstrained Contacts Does Not Transfer across Hands

PubMed Central

Fu, Qiushi; Choi, Jason Y.; Gordon, Andrew M.; Jesunathadas, Mark; Santello, Marco

2014-01-01

Recent studies about sensorimotor control of the human hand have focused on how dexterous manipulation is learned and generalized. Here we address this question by testing the extent to which learned manipulation can be transferred when the contralateral hand is used and/or object orientation is reversed. We asked subjects to use a precision grip to lift a grip device with an asymmetrical mass distribution while minimizing object roll during lifting by generating a compensatory torque. Subjects were allowed to grasp anywhere on the object’s vertical surfaces, and were therefore able to modulate both digit positions and forces. After every block of eight trials performed in one manipulation context (i.e., using the right hand and at a given object orientation), subjects had to lift the same object in the second context for one trial (transfer trial). Context changes were made by asking subjects to switch the hand used to lift the object and/or rotate the object 180° about a vertical axis. Therefore, three transfer conditions, hand switch (HS), object rotation (OR), and both hand switch and object rotation (HS+OR), were tested and compared with hand matched control groups who did not experience context changes. We found that subjects in all transfer conditions adapted digit positions across multiple transfer trials similar to the learning of control groups, regardless of different changes of contexts. Moreover, subjects in both HS and HS+OR group also adapted digit forces similar to the control group, suggesting independent learning of the left hand. In contrast, the OR group showed significant negative transfer of the compensatory torque due to an inability to adapt digit forces. Our results indicate that internal representations of dexterous manipulation tasks may be primarily built through the hand used for learning and cannot be transferred across hands. PMID:25233091

Unoriented 3d TFTs

NASA Astrophysics Data System (ADS)

Bhardwaj, Lakshya

2017-05-01

This paper generalizes two facts about oriented 3d TFTs to the unoriented case. On one hand, it is known that oriented 3d TFTs having a topological boundary condition admit a state-sum construction known as the Turaev-Viro construction. This is related to the string-net construction of fermionic phases of matter. We show how Turaev-Viro construction can be generalized to unoriented 3d TFTs. On the other hand, it is known that the "fermionic" versions of oriented TFTs, known as Spin-TFTs, can be constructed in terms of "shadow" TFTs which are ordinary oriented TFTs with an anomalous ℤ 2 1-form symmetry. We generalize this correspondence to Pin+-TFTs by showing that they can be constructed in terms of ordinary unoriented TFTs with anomalous ℤ 2 1-form symmetry having a mixed anomaly with time-reversal symmetry. The corresponding Pin+-TFT does not have any anomaly for time-reversal symmetry however and hence it can be unambiguously defined on a non-orientable manifold. In case a Pin+-TFT admits a topological boundary condition, one can combine the above two statements to obtain a Turaev-Viro-like construction of Pin+-TFTs. As an application of these ideas, we construct a large class of Pin+-SPT phases.

A Low-Tech, Hands-On Approach To Teaching Sorting Algorithms to Working Students.

ERIC Educational Resources Information Center

Dios, R.; Geller, J.

1998-01-01

Focuses on identifying the educational effects of "activity oriented" instructional techniques. Examines which instructional methods produce enhanced learning and comprehension. Discusses the problem of learning "sorting algorithms," a major topic in every Computer Science curriculum. Presents a low-tech, hands-on teaching method for sorting…

Machine Shop I. Oklahoma Trade and Industrial Education.

ERIC Educational Resources Information Center

Dunn, James

Designed to provide the basic knowledge and hands-on skills necessary to prepare job-ready machinist trainees, these instructional materials focus on the following areas of trade and industrial education: orientation, basic and related technology, hand and bench work, and power saws and drilling machines. Suitable for use in secondary,…

Assessment of child and adult users of the degree of orientation of Primary Healthcare in the city of Rio de Janeiro, Brazil.

PubMed

Harzheim, Erno; Pinto, Luiz Felipe; Hauser, Lisiane; Soranz, Daniel

2016-05-01

In the first half of 2014, 6,675 adults and caregivers of children using Primary Care (PC) services in Rio de Janeiro were interviewed using the Primary Care Assessment Tool - PCATool-Brazil. The aim was to arrive at an accurate overview of the extent to which PC services in all of the Planning Areas (PA) of the Rio de Janeiro City Health Department (CHD) - Municipal Health Secretariat have the essential and derivative attributes. This was a cross-sectional study of random, independent samples of the service users (children and adults). Results were measured using the scores assigned to PC attributes. In the opinion of adults and children using PC services, Type A Units - Municipal Healthcare Centers and Family Clinics staffed only with Family Health Teams, performed better than Type B units. The scores for the attributes "first contact accessibility", "comprehensive service - services provided", "community orientation" and "family orientation" still need to be improved. On the other hand "coordinated care" and "continuity" are on their way to quality scores, being always rated at around 6.0 or even higher.

Experimental determination of torsion angles in the polypeptide backbone of the gramicidin A channel by solid state nuclear magnetic resonance.

PubMed

Teng, Q; Nicholson, L K; Cross, T A

1991-04-05

An analytical method for the determination of torsion angles from solid state 15N nuclear magnetic resonance (n.m.r.) spectroscopic data is demonstrated. Advantage is taken of the 15N-1H and 15N-13C dipolar interactions as well as the 15N chemical shift interaction in oriented samples. The membrane-bound channel conformation of gramicidin A has eluded an atomic resolution structure determination by more traditional approaches. Here, the torsion angles for the Ala3 site are determined by obtaining the n.m.r. data for both the Gly2-Ala3 and Ala3-Leu4 peptide linkages. Complete utilization of the orientational constraints derived from these orientation-dependent nuclear spin interactions in restricting the conformational space is most effectively achieved by utilizing spherical trigonometry. Two possible sets of torsion angles for the Ala3 site are obtained (phi, psi = -129 degrees, 153 degrees and -129 degrees, 122 degrees), both of which are consistent with a right-handed beta-helix. Other functional and computational evidence strongly supports the set for which the carbonyl oxygen atom of the Ala3-Leu4 linkage is rotated into the channel lumen.

Methodological considerations for analyzing trabecular architecture: an example from the primate hand.

PubMed

Kivell, Tracy L; Skinner, Matthew M; Lazenby, Richard; Hublin, Jean-Jacques

2011-02-01

Micro-computed tomographic analyses of trabecular bone architecture have been used to clarify the link between positional behavior and skeletal anatomy in primates. However, there are methodological decisions associated with quantifying and comparing trabecular anatomy across taxa that vary greatly in body size and morphology that can affect characterizations of trabecular architecture, such as choice of the volume of interest (VOI) size and location. The potential effects of these decisions may be amplified in small, irregular-shaped bones of the hands and feet that have more complex external morphology and more heterogeneous trabecular structure compared to, for example, the spherical epiphysis of the femoral head. In this study we investigate the effects of changes in VOI size and location on standard trabecular parameters in two bones of the hand, the capitate and third metacarpal, in a diverse sample of nonhuman primates that vary greatly in morphology, body mass and positional behavior. Results demonstrate that changes in VOI location and, to a lesser extent, changes in VOI size had a dramatic affect on many trabecular parameters, especially trabecular connectivity and structure (rods vs. plates), degree of anisotropy, and the primary orientation of the trabeculae. Although previous research has shown that some trabecular parameters are susceptible to slight variations in methodology (e.g. VOI location, scan resolution), this study provides a quantification of these effects in hand bones of a diverse sample of primates. An a priori understanding of the inherent biases created by the choice of VOI size and particularly location is critical to robust trabecular analysis and functional interpretation, especially in small bones with complex arthroses. © 2010 The Authors. Journal of Anatomy © 2010 Anatomical Society of Great Britain and Ireland.

Variation in handshape and orientation in British Sign Language: The case of the ‘1’ hand configuration

PubMed Central

Fenlon, Jordan; Schembri, Adam; Rentelis, Ramas; Cormier, Kearsy

2013-01-01

This paper investigates phonological variation in British Sign Language (BSL) signs produced with a ‘1’ hand configuration in citation form. Multivariate analyses of 2084 tokens reveals that handshape variation in these signs is constrained by linguistic factors (e.g., the preceding and following phonological environment, grammatical category, indexicality, lexical frequency). The only significant social factor was region. For the subset of signs where orientation was also investigated, only grammatical function was important (the surrounding phonological environment and social factors were not significant). The implications for an understanding of pointing signs in signed languages are discussed. PMID:23805018

Homophobic Violence, Coping Styles, Visibility Management, and Mental Health: A Survey of Flemish Lesbian, Gay, and Bisexual Individuals.

PubMed

D'haese, Lies; Dewaele, Alexis; Houtte, Mieke Van

2016-09-01

The understanding of how lesbians, gays, and bisexuals cope with homophobic violence is limited. Therefore, on the one hand, this study focuses on avoidance, problem-oriented, and emotion-oriented coping as general coping styles. On the other hand, special attention is paid to visibility management as a coping strategy that can be applied in a heteronormative context. Moreover, the moderating role of general coping styles and visibility management in the relationship between homophobic violence and negative mental health outcomes is studied. Data were collected from 1,402 Flemish lesbians, gays, and bisexuals. Stepwise regression analyses shows that coping styles and visibility management have a direct effect on mental health; however, no evidence for a moderating effect is found. Additionally, visibility management and emotion-oriented coping are found to exert a combined effect on mental health.

A quantum mechanical approach to establishing the magnetic field orientation from a maser Zeeman profile

NASA Astrophysics Data System (ADS)

Green, J. A.; Gray, M. D.; Robishaw, T.; Caswell, J. L.; McClure-Griffiths, N. M.

2014-06-01

Recent comparisons of magnetic field directions derived from maser Zeeman splitting with those derived from continuum source rotation measures have prompted new analysis of the propagation of the Zeeman split components, and the inferred field orientation. In order to do this, we first review differing electric field polarization conventions used in past studies. With these clearly and consistently defined, we then show that for a given Zeeman splitting spectrum, the magnetic field direction is fully determined and predictable on theoretical grounds: when a magnetic field is oriented away from the observer, the left-hand circular polarization is observed at higher frequency and the right-hand polarization at lower frequency. This is consistent with classical Lorentzian derivations. The consequent interpretation of recent measurements then raises the possibility of a reversal between the large-scale field (traced by rotation measures) and the small-scale field (traced by maser Zeeman splitting).

Effects of time perspective and self-control on procrastination and Internet addiction.

PubMed

Kim, Jinha; Hong, Hyeongi; Lee, Jungeun; Hyun, Myoung-Ho

2017-06-01

Background and aims College students experiencing stress show tendencies to procrastinate and can develop Internet addiction problems. This study investigated the structural relationship between time perspective and self-control on procrastination and Internet addiction. Methods College students (N = 377) residing in South Korea completed the following questionnaires: the Pathological Internet Use Behavior Symptom Scale for Adults, the Zimbardo Time Perspective Inventory, the Self-Control Rating Scale, and the Aitken Procrastination Inventory. The sample variance-covariance matrix was analyzed using AMOS 20.0. Results Time perspective had a direct effect on self-control and an indirect effect on Internet use and procrastination. In addition, self-control affected procrastination and Internet use. Conclusions Individuals with a present-oriented time perspective tend to evidence poorer self-control, increasing the likelihood of procrastination and Internet addiction. Individuals with a future-oriented time perspective, on the other hand, tend to have stronger self-control, decreasing their risk of procrastination and Internet addiction.

Effects of time perspective and self-control on procrastination and Internet addiction

PubMed Central

Kim, Jinha; Hong, Hyeongi; Lee, Jungeun; Hyun, Myoung-Ho

2017-01-01

Background and aims College students experiencing stress show tendencies to procrastinate and can develop Internet addiction problems. This study investigated the structural relationship between time perspective and self-control on procrastination and Internet addiction. Methods College students (N = 377) residing in South Korea completed the following questionnaires: the Pathological Internet Use Behavior Symptom Scale for Adults, the Zimbardo Time Perspective Inventory, the Self-Control Rating Scale, and the Aitken Procrastination Inventory. The sample variance–covariance matrix was analyzed using AMOS 20.0. Results Time perspective had a direct effect on self-control and an indirect effect on Internet use and procrastination. In addition, self-control affected procrastination and Internet use. Conclusions Individuals with a present-oriented time perspective tend to evidence poorer self-control, increasing the likelihood of procrastination and Internet addiction. Individuals with a future-oriented time perspective, on the other hand, tend to have stronger self-control, decreasing their risk of procrastination and Internet addiction. PMID:28494615

Allied Health Occupations. Final Report.

ERIC Educational Resources Information Center

Farmington Public Schools, CT.

A curriculum is provided for a full-year course that offers a practical and career-oriented exploratory program dealing with allied health careers. Targeted for high school juniors and seniors with little or no life science background and an interest in health occupations, the course is designed to be a hands-on, experience-oriented practical…

Engaging First-Year Undergraduates in Hands-On Research Experiences: The Upper Green River Barcode of Life Project

ERIC Educational Resources Information Center

Marcus, Jeffrey M.; Hughes, Tia M.; McElroy, Douglas M.; Wyatt, Robert E.

2010-01-01

To improve retention and engagement, first-year college science majors enrolled in University Experience orientation courses participated in a hands-on laboratory research experience: a DNA barcoding project to facilitate species identification. Students collected arthropods and hypothesized morphology-based species identifications. Then they…

Hands-on Summer Camp to Attract K-12 Students to Engineering Fields

ERIC Educational Resources Information Center

Yilmaz, Muhittin; Ren, Jianhong; Custer, Sheryl; Coleman, Joyce

2010-01-01

This paper explains the organization and execution of a summer engineering outreach camp designed to attract and motivate high school students as well as increase their awareness of various engineering fields. The camp curriculum included hands-on, competitive design-oriented engineering projects from several disciplines: the electrical,…

Rethinking the Representation Problem in Curriculum Inquiry

ERIC Educational Resources Information Center

Green, Bill

2010-01-01

The consolidation of reconceptualism as a distinctive tradition in curriculum inquiry is commonly understood to go hand-in-hand with the decline and even eclipse of an explicit political orientation in such work. This paper offers an alternative argument, focusing on a re-assessment of what has been called the representation problem, and exploring…

Support for Conference Entitled The Fifth PHANTOM Users Group Workshop

DTIC Science & Technology

2001-02-01

amplified by using extended A collection of functional test environments were assembled hand tools like a hammer, pipe wrench, or tennis racket. The to...view their hand, were seated at a desk, Surfaces were presented at a range of orientations, resting their right elbow on its surface, and used a in

Does gaze cueing produce automatic response activation: a lateralized readiness potential (LRP) study.

PubMed

Vainio, L; Heimola, M; Heino, H; Iljin, I; Laamanen, P; Seesjärvi, E; Paavilainen, P

2014-05-01

Previous research has shown that gaze cues facilitate responses to an upcoming target if the target location is compatible with the direction of the cue. Similar cueing effects have also been observed with central arrow cues. Both of these cueing effects have been attributed to a reflexive orienting of attention triggered by the cue. In addition, orienting of attention has been proposed to result in a partial response activation of the corresponding hand that, in turn, can be observed in the lateralized readiness potential (LRP), an electrophysiological indicator of automatic hand-motor response preparation. For instance, a central arrow cue has been observed to produce automatic hand-motor activation as indicated by the LRPs. The present study investigated whether gaze cues could also produce similar activation patterns in LRP. Although the standard gaze cueing effect was observed in the behavioural data, the LRP data did not reveal any consistent automatic hand-motor activation. The study suggests that motor processes associated with gaze cueing effect may operate exclusively at the level of oculomotor programming. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Effects of coil orientation on the electric field induced by TMS over the hand motor area

NASA Astrophysics Data System (ADS)

Laakso, Ilkka; Hirata, Akimasa; Ugawa, Yoshikazu

2014-01-01

Responses elicited by transcranial magnetic stimulation (TMS) over the hand motor area depend on the position and orientation of the stimulating coil. In this work, we computationally investigate the induced electric field for multiple coil orientations and locations in order to determine which parts of the brain are affected and how the sensitivity of motor cortical activation depends on the direction of the electric field. The finite element method is used for calculating the electric field induced by TMS in two individual anatomical models of the head and brain. The orientation of the coil affects both the strength and depth of penetration of the electric field, and the field strongly depends on the direction of the sulcus, where the target neurons are located. The coil position that gives the strongest electric field in the target cortical region may deviate from the closest scalp location by a distance on the order of 1 cm. Together with previous experimental data, the results support the hypothesis that the cortex is most sensitive to fields oriented perpendicular to the cortical layers, while it is relatively insensitive to fields parallel to them. This has important implications for targeting of TMS. To determine the most effective coil position and orientation, it is essential to consider both biological (the direction of the targeted axons) and physical factors (the strength and direction of the electric field).

Physically coupling two objects in a bimanual task alters kinematics but not end-state comfort.

PubMed

Hughes, Charmayne M L; Haddad, Jeffrey M; Franz, Elizabeth A; Zelaznik, Howard N; Ryu, Joong Hyun

2011-06-01

People often grasp objects with an awkward grip to ensure a comfortable hand posture at the end of the movement. This end-state comfort effect is a predominant constraint during unimanual movements. However, during bimanual movements the tendency for both hands to satisfy end-state comfort is affected by factors such as end-orientation congruency and task context. Although bimanual end-state comfort has been examined when the hands manipulate two independent objects, no research has examined end-state comfort when the hands are required to manipulate two physically-coupled objects. In the present experiment, kinematics and grasp behavior during a unimanual and bimanual reaching and placing tasks were examined, when the hands manipulate two physically-connected objects. Forty-five participants were assigned to one of three groups; unimanual, bimanual no-spring (the objects were not physically connected), and bimanual spring (the objects were connected by a spring), and instructed to grasp and place objects in various end-orientations, depending on condition. Physically connecting the objects did not affect end-state comfort prevalence. However, it resulted in decreased interlimb coupling. This finding supports the notion of a flexible constraint hierarchy, in which action goals guide the selection of lower level action features (i.e., hand grip used for grasping), and the particular movements used to accomplish that goal (i.e., interlimb coupling) are controlled throughout the movement.

"Born Frees", Negotiating the Terrain towards Selfhood and Wellness: A Life Orientation Perspective

ERIC Educational Resources Information Center

Magano, Meahabo Dinah; Berman, Ashley Ita

2016-01-01

This study was contextualised within the Life Orientation subject of "Self in Society". It acknowledges that the present time is uniquely significant in South African history as the generation of youth leaving school are now considered "born frees". This generation is considered to be free from the first-hand trauma that was…

The Analysis of Elementary Mathematics Preservice Teachers' Spatial Orientation Skills with SOLO Model

ERIC Educational Resources Information Center

Özdemir, Ahmet Sükrü; Göktepe Yildiz, Sevda

2015-01-01

Problem Statement: The SOLO model places responses provided by students on a certain level instead of placing students there themselves. SOLO taxonomy, including five sub-levels, is used for determining observed structures of learning outcomes in various disciplines and grade levels. On the other hand, the spatial orientation skill is the ability…

A Hands-On Approach to Teaching Protein Translation & Translocation into the ER

ERIC Educational Resources Information Center

LaBonte, Michelle L.

2013-01-01

The process of protein translation and translocation into the endoplasmic reticulum (ER) can often be challenging for introductory college biology students to visualize. To help them understand how proteins become oriented in the ER membrane, I developed a hands-on activity in which students use Play-Doh to simulate the process of protein…

Hand in Hand: Selected Reprints and Annotated Bibliography on Working with Students Who Are Deaf-Blind.

ERIC Educational Resources Information Center

Huebner, Kathleen Mary, Ed.; And Others

The items in this collection of reprints and an annotated bibliography were selected because of their value to classroom teachers working with deaf-blind students. Reprinted articles, originally published in various periodicals between 1978 and 1993, are grouped into five categories: (1) communication, (2) orientation and mobility, (3) functional…

Correlations between the Hand Test Pathology score and Personality Assessment Inventory scales for pain clinic patients.

PubMed

George, J M; Wagner, E E

1995-06-01

Pearson correlations between the Hand Test Pathology (PATH) score and Personality Assessment Inventory scales produced a cluster of relationships characteristic of an antisocial orientation. Likewise, PATH significantly differentiated between a "P" (Pathology) group flagged by a high Negative Impression score on the inventory, and an "N" (Normal) group of 100 pain patients. It was suggested that the interpretive simplicity of Hand Test scores renders the scores amenable to further correlational studies involving the inventory.

Mirror writing in pre-school children: a pilot study.

PubMed

Cubelli, Roberto; Della Sala, Sergio

2009-05-01

Mirror writing refers to the production of individual letters, whole words or sentences in reverse direction. Unintentional mirror writing has been observed in young children learning to write and interpreted as the manifestation of different cognitive impairments. We report on mirror writing instances in a sample of 108 pre-school children. Results showed MW to be age-related but independent from handedness and left-right discrimination abilities. We propose an account of mirror writing as reflecting dissociation between acquired motor programmes for letter shape composition and unspecified spatial direction of hand movements. Before learning to write, the child's directional cognitive system is assumed to be dichotomous, thus inducing the production of randomly oriented asymmetrical letters.

Endothermic decompositions of inorganic monocrystalline thin plates. II. Displacement rate modulation of the reaction front

NASA Astrophysics Data System (ADS)

Bertrand, G.; Comperat, M.; Lallemant, M.

1980-09-01

Copper sulfate pentahydrate dehydration into trihydrate was investigated using monocrystalline platelets with (110) crystallographic orientation. Temperature and pressure conditions were selected so as to obtain elliptical trihydrate domains. The study deals with the evolution, vs time, of elliptical domain dimensions and the evolution, vs water vapor pressure, of the {D}/{d} ratio of ellipse axes and on the other hand of the interface displacement rate along a given direction. The phenomena observed are not basically different from those yielded by the overall kinetic study of the solid sample. Their magnitude, however, is modulated depending on displacement direction. The results are analyzed within the scope of our study of endothermic decomposition of solids.

Hand hygiene practices in a neonatal intensive care unit: a multimodal intervention and impact on nosocomial infection.

PubMed

Lam, Barbara C C; Lee, Josephine; Lau, Y L

2004-11-01

Health care-associated infections persist as a major problem in most neonatal intensive care units. Hand hygiene has been singled out as the most important measure in preventing hospital-acquired infection. However, hand hygiene compliance among health care workers (HCWs) remains low. The objective of this study was to assess the frequency and nature of patient contacts in neonatal intensive care units and observe the compliance and technique of hand hygiene among HCWs before and after the implementation of a multimodal intervention program. The nature and frequency of patient contacts, the hand hygiene compliance, and hand-washing techniques of HCWs were observed unobtrusively to reflect the baseline compliance and to investigate factors for noncompliance. The intervention consisted of problem-based and task-orientated hand hygiene education, enhancement of minimal handling protocol and clustering of nursing care, liberal provision of alcohol-based hand antiseptic, improvement in hand hygiene facilities, ongoing regular hand hygiene audit, and implementation of health care-associated infection surveillance. The observational study was repeated 6 months after the completion of the intervention program, which extended over 1-year period. Overall hand hygiene compliance increased from 40% to 53% before patient contact and 39% to 59% after patient contact. More marked improvement was observed for high-risk procedures (35%-60%). The average number of patient contacts also decreased from 2.8 to 1.8 per patient per hour. There was improvement in most aspects of hand-washing technique in the postintervention stage. The health care-associated infection rate decreased from 11.3 to 6.2 per 1000 patient-days. A problem-based and task-orientated education program can improve hand hygiene compliance. Enhancement of minimal handling and clustering of nursing procedures reduced the total patient contact episodes, which could help to overcome the major barrier of time constraints. A concurrent decrease in health care-associated infection rate and increase in hand hygiene compliance was observed in this study. The observational study could form part of an ongoing audit to provide regular feedback to HCWs to sustain the compliance.

FRET measurements of kinesin neck orientation reveal a structural basis for processivity and asymmetry.

PubMed

Martin, Douglas S; Fathi, Reza; Mitchison, Timothy J; Gelles, Jeff

2010-03-23

As the smallest and simplest motor enzymes, kinesins have served as the prototype for understanding the relationship between protein structure and mechanochemical function of enzymes in this class. Conventional kinesin (kinesin-1) is a motor enzyme that transports cargo toward the plus end of microtubules by a processive, asymmetric hand-over-hand mechanism. The coiled-coil neck domain, which connects the two kinesin motor domains, contributes to kinesin processivity (the ability to take many steps in a row) and is proposed to be a key determinant of the asymmetry in the kinesin mechanism. While previous studies have defined the orientation and position of microtubule-bound kinesin motor domains, the disposition of the neck coiled-coil remains uncertain. We determined the neck coiled-coil orientation using a multidonor fluorescence resonance energy transfer (FRET) technique to measure distances between microtubules and bound kinesin molecules. Microtubules were labeled with a new fluorescent taxol donor, TAMRA-X-taxol, and kinesin derivatives with an acceptor fluorophore attached at positions on the motor and neck coiled-coil domains were used to reconstruct the positions and orientations of the domains. FRET measurements to positions on the motor domain were largely consistent with the domain orientation determined in previous studies, validating the technique. Measurements to positions on the neck coiled-coil were inconsistent with a radial orientation and instead demonstrated that the neck coiled-coil is parallel to the microtubule surface. The measured orientation provides a structural explanation for how neck surface residues enhance processivity and suggests a simple hypothesis for the origin of kinesin step asymmetry and "limping."

The coil orientation dependency of the electric field induced by TMS for M1 and other brain areas.

PubMed

Janssen, Arno M; Oostendorp, Thom F; Stegeman, Dick F

2015-05-17

The effectiveness of transcranial magnetic stimulation (TMS) depends highly on the coil orientation relative to the subject's head. This implies that the direction of the induced electric field has a large effect on the efficiency of TMS. To improve future protocols, knowledge about the relationship between the coil orientation and the direction of the induced electric field on the one hand, and the head and brain anatomy on the other hand, seems crucial. Therefore, the induced electric field in the cortex as a function of the coil orientation has been examined in this study. The effect of changing the coil orientation on the induced electric field was evaluated for fourteen cortical targets. We used a finite element model to calculate the induced electric fields for thirty-six coil orientations (10 degrees resolution) per target location. The effects on the electric field due to coil rotation, in combination with target site anatomy, have been quantified. The results confirm that the electric field perpendicular to the anterior sulcal wall of the central sulcus is highly susceptible to coil orientation changes and has to be maximized for an optimal stimulation effect of the motor cortex. In order to obtain maximum stimulation effect in areas other than the motor cortex, the electric field perpendicular to the cortical surface in those areas has to be maximized as well. Small orientation changes (10 degrees) do not alter the induced electric field drastically. The results suggest that for all cortical targets, maximizing the strength of the electric field perpendicular to the targeted cortical surface area (and inward directed) optimizes the effect of TMS. Orienting the TMS coil based on anatomical information (anatomical magnetic resonance imaging data) about the targeted brain area can improve future results. The standard coil orientations, used in cognitive and clinical neuroscience, induce (near) optimal electric fields in the subject-specific head model in most cases.

Both right- and left-handers show a bias to attend others' right arm.

PubMed

Marzoli, Daniele; Lucafò, Chiara; Pagliara, Alessandra; Cappuccio, Romina; Brancucci, Alfredo; Tommasi, Luca

2015-02-01

The common-coding hypothesis suggests that the more similar an observed action is to the way the observer would perform it, the stronger is the ensuing activation of motor representations. Therefore, producing actions could prime perception so that observers would be particularly responsive to (i.e. biased to perceive) actions that are related to, and share features with, their own actions. If this similarity principle also applies to handedness, right- and left-handers should be more likely to perceive actions as performed with their dominant rather than non-dominant hand. In two experiments, participants were required to indicate the perceived orientation (front or back view) of pictures of ambiguous human silhouettes performing one-handed manual actions. Experiment 1, in which 300 right-handers and 60 left-handers reported the orientation of a single silhouette seen for as much as they wished, showed that participants perceived the figures more frequently in an orientation congruent with a movement performed with the right rather than the left hand. Experiment 2, in which 12 right-handers and 12 left-handers reported the orientation of 52 silhouettes seen for 300 ms, showed similar results when multiple responses per participant were collected rather than only one. Contrary to our expectations, no difference was observed between right- and left-handers, which might suggest an attentional bias towards the right arm of human bodies in both groups. Moreover, participants were more likely to perceive the figure as front-facing than as back-facing, possibly due to the greater adaptive relevance of approaching compared to receding individuals.

Associations between online friendship and Internet addiction among adolescents and emerging adults.

PubMed

Smahel, David; Brown, B Bradford; Blinka, Lukas

2012-03-01

The past decades have witnessed a dramatic increase in the number of youths using the Internet, especially for communicating with peers. Online activity can widen and strengthen the social networks of adolescents and emerging adults (Subrahmanyam & Smahel, 2011), but it also increases the risk of Internet addiction. Using a framework derived from Griffiths (2000a), this study examined associations between online friendship and Internet addiction in a representative sample (n = 394) of Czech youths ages 12-26 years (M = 18.58). Three different approaches to friendship were identified: exclusively offline, face-to-face oriented, Internet oriented, on the basis of the relative percentages of online and offline associates in participants' friendship networks. The rate of Internet addiction did not differ by age or gender but was associated with communication styles, hours spent online, and friendship approaches. The study revealed that effects between Internet addiction and approaches to friendship may be reciprocal: Being oriented toward having more online friends, preferring online communication, and spending more time online were related to increased risk of Internet addiction; on the other hand, there is an alternative causal explanation that Internet addiction and preference for online communication conditions young people's tendency to seek friendship from people met online. PsycINFO Database Record (c) 2012 APA, all rights reserved.

A Biomechanical Assessment of Hand/Arm Force with Pneumatic Nail Gun Actuation Systems.

PubMed

Lowe, Brian D; Albers, James; Hudock, Stephen D

2014-09-01

A biomechanical model is presented, and combined with measurements of tip press force, to estimate total user hand force associated with two pneumatic nail gun trigger systems. The contact actuation trigger (CAT) can fire a nail when the user holds the trigger depressed first and then "bumps" the nail gun tip against the workpiece. With a full sequential actuation trigger (SAT) the user must press the tip against the workpiece prior to activating the trigger. The SAT is demonstrably safer in reducing traumatic injury risk, but increases the duration (and magnitude) of tip force exertion. Time integrated (cumulative) hand force was calculated for a single user from measurements of the tip contact force with the workpiece and transfer time between nails as inputs to a static model of the nail gun and workpiece in two nailing task orientations. The model shows the hand force dependence upon the orientation of the workpiece in addition to the trigger system. Based on standard time allowances from work measurement systems (i.e. Methods-Time Measurement - 1) it is proposed that efficient application of hand force with the SAT in maintaining tip contact can reduce force exertion attributable to the sequential actuation trigger to 2-8% (horizontal nailing) and 9-20% (vertical nailing) of the total hand/arm force. The present model is useful for considering differences in cumulative hand/arm force exposure between the SAT and CAT systems and may explain the appeal of the CAT trigger in reducing the user's perception of muscular effort.

A Biomechanical Assessment of Hand/Arm Force with Pneumatic Nail Gun Actuation Systems

PubMed Central

Lowe, Brian D.; Albers, James; Hudock, Stephen D.

2015-01-01

A biomechanical model is presented, and combined with measurements of tip press force, to estimate total user hand force associated with two pneumatic nail gun trigger systems. The contact actuation trigger (CAT) can fire a nail when the user holds the trigger depressed first and then “bumps” the nail gun tip against the workpiece. With a full sequential actuation trigger (SAT) the user must press the tip against the workpiece prior to activating the trigger. The SAT is demonstrably safer in reducing traumatic injury risk, but increases the duration (and magnitude) of tip force exertion. Time integrated (cumulative) hand force was calculated for a single user from measurements of the tip contact force with the workpiece and transfer time between nails as inputs to a static model of the nail gun and workpiece in two nailing task orientations. The model shows the hand force dependence upon the orientation of the workpiece in addition to the trigger system. Based on standard time allowances from work measurement systems (i.e. Methods-Time Measurement - 1) it is proposed that efficient application of hand force with the SAT in maintaining tip contact can reduce force exertion attributable to the sequential actuation trigger to 2–8% (horizontal nailing) and 9–20% (vertical nailing) of the total hand/arm force. The present model is useful for considering differences in cumulative hand/arm force exposure between the SAT and CAT systems and may explain the appeal of the CAT trigger in reducing the user’s perception of muscular effort. PMID:26321780

Digit reversal in children's writing: a simple theory and its empirical validation.

PubMed

Fischer, Jean-Paul

2013-06-01

This article presents a simple theory according to which the left-right reversal of single digits by 5- and 6-year-old children is mainly due to the application of an implicit right-writing or -orienting rule. A number of nontrivial predictions can be drawn from this theory. First, left-oriented digits (1, 2, 3, 7, and 9) will be reversed more frequently than the other asymmetrical digits (4, 5, and 6). Second, for some pairs of digits, the correct writing of the preceding digit will statistically predict the reversal of the current digit and vice versa. Third, writing hand will have little effect on the frequency of reversals, and the relative frequencies with which children reverse the asymmetrical digits will be similar regardless of children's preferred writing hand. Fourth, children who reverse the left-oriented digits the most are also those who reverse the other asymmetrical digits the least. An empirical study involving 367 5- and 6-year-olds confirmed these predictions. Copyright © 2013 Elsevier Inc. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jinlong, Lv, E-mail: ljlbuaa@126.com; State Key Lab of New Ceramic and Fine Processing, Tsinghua University, Beijing 100084; Tongxiang, Liang, E-mail: ljltsinghua@126.com

The nanocrystalline pure nickels with different grain orientations were fabricated by direct current electrodeposition process. The grain size slightly decreased with the increasing of electrodeposition solution temperature. However, grain orientation was affected significantly. Comparing with samples obtained at 50 °C and 80 °C, sample obtained at 20 °C had the strongest (111) orientation plane which increased electrochemical corrosion resistance of this sample. At the same time, the lowest (111) orientation plane deteriorated electrochemical corrosion resistance of sample obtained at 50 °C. - Graphical abstract: The increased electrodeposition temperature promoted slightly grain refinement. The grain orientation was affected significantly by electrodepositionmore » solution temperature. The (111) orientation plane of sample increased significantly corrosion resistance. Display Omitted.« less

Alignment effects in beer mugs: Automatic action activation or response competition?

PubMed

Roest, Sander A; Pecher, Diane; Naeije, Lilian; Zeelenberg, René

2016-08-01

Responses to objects with a graspable handle are faster when the response hand and handle orientation are aligned (e.g., a key press with the right hand is required and the object handle is oriented to the right) than when they are not aligned. This effect could be explained by automatic activation of specific motor programs when an object is viewed. Alternatively, the effect could be explained by competition at the response level. Participants performed a reach-and-grasp or reach-and-button-press action with their left or right hand in response to the color of a beer mug. The alignment effect did not vary as a function of the type of action. In addition, the alignment effect disappeared in a go/no-go version of the task. The same results were obtained when participants made upright/inverted decisions, so that object shape was task-relevant. Our results indicate that alignment effects are not due to automatic motor activation of the left or right limb.

Orbiting Sample Capture and Orientation Technologies for Potential Mars Sample Return

NASA Astrophysics Data System (ADS)

Younse, P.; Adajian, R.; Dolci, M.; Ohta, P.; Olds, E.; Lalla, K.; Strahle, J. W.

2018-04-01

Technologies applicable to a potential Mars Sample Return Orbiter for orbiting sample container capture and orientation are presented, as well as an integrated MArs CApture and ReOrientation for a potential NExt Mars Orbiter (MACARONE) concept.

An Evaluation of Two Hands-On Lab Styles for Plant Biodiversity in Undergraduate Biology

ERIC Educational Resources Information Center

Basey, John M.; Maines, Anastasia P.; Francis, Clinton D.; Melbourne, Brett

2014-01-01

We compared learning cycle and expository formats for teaching about plant biodiversity in an inquiry-oriented university biology lab class (n = 465). Both formats had preparatory lab activities, a hands-on lab, and a postlab with reflection and argumentation. Learning was assessed with a lab report, a practical quiz in lab, and a multiple-choice…

Birth Position, Neonatal Head Position Preference, and Hand Preference in 19-Week-Old-Infants.

ERIC Educational Resources Information Center

Goodwin, Rhoda S.

This study investigated the hypotheses that 1) infants delivered from a left occiput anterior or transverse position (LOA/LOT) would exhibit a right supine head orientation in the neonatal examination and a right hand preference at 19 weeks of age; and 2) infants delivered from a right occiput anterior or transverse position (ROA/ROT) would…

Interrupted object-based updating of reach program leads to a negative compatibility effect.

PubMed

Vainio, Lari

2009-07-01

The author investigated how the motor program elicited by an object's orientation is updated by object-based information while a participant reaches for the object. Participants selected the hand of response according to the thickness of the graspable object and then reached toward the location in which the object appeared. Reach initiation times decreased when the handle of the object was oriented toward the responding hand. This positive compatibility effect turned into a negative compatibility effect (NCE) during reach execution when the object was removed from the display 300 ms after object onset or replaced with a mask at movement onset. The results demonstrate that interrupted object-based updating of an ongoing reach movement triggers the NCE.

Sampling of temporal networks: Methods and biases

NASA Astrophysics Data System (ADS)

Rocha, Luis E. C.; Masuda, Naoki; Holme, Petter

2017-11-01

Temporal networks have been increasingly used to model a diversity of systems that evolve in time; for example, human contact structures over which dynamic processes such as epidemics take place. A fundamental aspect of real-life networks is that they are sampled within temporal and spatial frames. Furthermore, one might wish to subsample networks to reduce their size for better visualization or to perform computationally intensive simulations. The sampling method may affect the network structure and thus caution is necessary to generalize results based on samples. In this paper, we study four sampling strategies applied to a variety of real-life temporal networks. We quantify the biases generated by each sampling strategy on a number of relevant statistics such as link activity, temporal paths and epidemic spread. We find that some biases are common in a variety of networks and statistics, but one strategy, uniform sampling of nodes, shows improved performance in most scenarios. Given the particularities of temporal network data and the variety of network structures, we recommend that the choice of sampling methods be problem oriented to minimize the potential biases for the specific research questions on hand. Our results help researchers to better design network data collection protocols and to understand the limitations of sampled temporal network data.

NURSING 911: an orientation program to improve retention of online RN-BSN students.

PubMed

Gilmore, Melanie; Lyons, Evadna M

2012-01-01

This article describes the implementation and evaluation of an eight-hour, comprehensive, face-to-face orientation program designed to improve student retention in a newly developed online RN to BSN program. A total of 179 newly enrolled RN to BSN students participated in the orientation program and evaluated the process. Student attrition decreased from 20 percent to less than 1 percent after the orientation program was extended and improved to include a technology assessment and an online practice course. A quality online program requires a well-designed orientation that includes technological assessments and hands-on, active participation by the learner. The newly improved and designed course has become effective in student retention and transition into the online learning environment.

Stability of smectic phases in hard-rod mixtures

NASA Astrophysics Data System (ADS)

Martínez-Ratón, Yuri; Velasco, Enrique; Mederos, Luis

2005-09-01

Using density-functional theory, we have analyzed the phase behavior of binary mixtures of hard rods of different lengths and diameters. Previous studies have shown a strong tendency of smectic phases of these mixtures to segregate and, in some circumstances, to form microsegregated phases. Our focus in the present work is on the formation of columnar phases which some studies, under some approximations, have shown to become thermodynamically stable prior to crystallization. Specifically we focus on the relative stability between smectic and columnar phases, a question not fully addressed in previous work. Our analysis is based on two complementary perspectives: on the one hand, an extended Onsager theory, which includes the full orientational degrees of freedom but with spatial and orientational correlations being treated in an approximate manner; on the other hand, we formulate a Zwanzig approximation of fundamental-measure theory on hard parallelepipeds, whereby orientations are restricted to be only along three mutually orthogonal axes, but correlations are faithfully represented. In the latter case novel, complete phase diagrams containing regions of stability of liquid-crystalline phases are calculated. Our findings indicate that the restricted-orientation approximation enhances the stability of columnar phases so as to preempt smectic order completely while, in the framework of the extended Onsager model, with full orientational degrees of freedom taken into account, columnar phases may preempt a large region of smectic stability in some mixtures, but some smectic order still persists.

Perceptual and Motor Performance of Combat-Sport Athletes Differs According to Specific Demands of the Discipline.

PubMed

Chen, Wei-Ying; Wu, Sheng K; Song, Tai-Fen; Chou, Kuei-Ming; Wang, Kuei-Yuan; Chang, Yao-Ching; Goodbourn, Patrick T

2016-12-07

The specific demands of a combat-sport discipline may be reflected in the perceptual-motor performance of its athletes. Taekwondo, which emphasizes kicking, might require faster perceptual processing to compensate for longer latencies to initiate lower-limb movements and to give rapid visual feedback for dynamic postural control, while Karate, which emphasizes both striking with the hands and kicking, might require exceptional eye-hand coordination and fast perceptual processing. In samples of 38 Taekwondo athletes (16 females, 22 males; mean age = 19.9 years, SD = 1.2), 24 Karate athletes (9 females, 15 males; mean age = 18.9 years, SD = 0.9), and 35 Nonathletes (20 females, 15 males; mean age = 20.6 years, SD = 1.5), we measured eye-hand coordination with the Finger-Nose-Finger task, and both perceptual-processing speed and attentional control with the Covert Orienting of Visual Attention (COVAT) task. Eye-hand coordination was significantly better for Karate athletes than for Taekwondo athletes and Nonathletes, but reaction times for the upper extremities in the COVAT task-indicative of perceptual-processing speed-were faster for Taekwondo athletes than for Karate athletes and Nonathletes. In addition, we found no significant difference among groups in attentional control, as indexed by the reaction-time cost of an invalid cue in the COVAT task. The results suggest that athletes in different combat sports exhibit distinct profiles of perceptual-motor performance. © The Author(s) 2016.

Object-Oriented Design for Sparse Direct Solvers

NASA Technical Reports Server (NTRS)

Dobrian, Florin; Kumfert, Gary; Pothen, Alex

1999-01-01

We discuss the object-oriented design of a software package for solving sparse, symmetric systems of equations (positive definite and indefinite) by direct methods. At the highest layers, we decouple data structure classes from algorithmic classes for flexibility. We describe the important structural and algorithmic classes in our design, and discuss the trade-offs we made for high performance. The kernels at the lower layers were optimized by hand. Our results show no performance loss from our object-oriented design, while providing flexibility, case of use, and extensibility over solvers using procedural design.

Static hand gesture recognition from a video

NASA Astrophysics Data System (ADS)

Rokade, Rajeshree S.; Doye, Dharmpal

2011-10-01

A sign language (also signed language) is a language which, instead of acoustically conveyed sound patterns, uses visually transmitted sign patterns to convey meaning- "simultaneously combining hand shapes, orientation and movement of the hands". Sign languages commonly develop in deaf communities, which can include interpreters, friends and families of deaf people as well as people who are deaf or hard of hearing themselves. In this paper, we proposed a novel system for recognition of static hand gestures from a video, based on Kohonen neural network. We proposed algorithm to separate out key frames, which include correct gestures from a video sequence. We segment, hand images from complex and non uniform background. Features are extracted by applying Kohonen on key frames and recognition is done.

Midline Body Actions and Leftward Spatial “Aiming” in Patients with Spatial Neglect

PubMed Central

Chaudhari, Amit; Pigott, Kara; Barrett, A. M.

2015-01-01

Spatial motor–intentional “Aiming” bias is a dysfunction in initiation/execution of motor–intentional behavior, resulting in hypokinetic and hypometric leftward movements. Aiming bias may contribute to posture, balance, and movement problems and uniquely account for disability in post-stroke spatial neglect. Body movement may modify and even worsen Aiming errors, but therapy techniques, such as visual scanning training, do not take this into account. Here, we evaluated (1) whether instructing neglect patients to move midline body parts improves their ability to explore left space and (2) whether this has a different impact on different patients. A 68-year-old woman with spatial neglect after a right basal ganglia infarct had difficulty orienting to and identifying left-sided objects. She was prompted with four instructions: “look to the left,” “point with your nose to the left,” “point with your [right] hand to the left,” and “stick out your tongue and point it to the left.” She oriented leftward dramatically better when pointing with the tongue/nose, than she did when pointing with the hand. We then tested nine more consecutive patients with spatial neglect using the same instructions. Only four of them made any orienting errors. Only one patient made >50% errors when pointing with the hand, and she did not benefit from pointing with the tongue/nose. We observed that pointing with the tongue could facilitate left-sided orientation in a stroke survivor with spatial neglect. If midline structures are represented more bilaterally, they may be less affected by Aiming bias. Alternatively, moving the body midline may be more permissive for leftward orienting than moving right body parts. We were not able to replicate this effect in another patient; we suspect that the magnitude of this effect may depend upon the degree to which patients have directional akinesia, spatial Where deficits, or cerebellar/frontal cortical lesions. Future research could examine these hypotheses. PMID:26217211

Do Human Fetuses Anticipate Self-Oriented Actions? A Study by Four-Dimensional (4D) Ultrasonography

ERIC Educational Resources Information Center

Myowa-Yamakoshi, Masako; Takeshita, Hideko

2006-01-01

Using four-dimensional (4D) ultrasonography, arm and hand movements toward the face were examined in 27 human fetuses at 19 to 35 weeks of gestation, thereby enabling the continuous monitoring of their faces and other surface features such as the extremities. More than half of the observed arm movements resulted in the hand touching the mouth…

Relationship among Students' Problem-Solving Attitude, Perceived Value, Behavioral Attitude, and Intention to Participate in a Science and Technology Contest

ERIC Educational Resources Information Center

Huang, Neng-Tang Norman; Chiu, Li-Jia; Hong, Jon-Chao

2016-01-01

The strong humanistic and ethics-oriented philosophy of Confucianism tends to lead people influenced by these principles to undervalue the importance of hands-on practice and creativity in education. GreenMech, a science and technology contest, was implemented to encourage real-world, hands-on problem solving in an attempt to mitigate this effect.…

Incident flux angle induced crystal texture transformation in nanostructured molybdenum films

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, L.; Lu, T.-M.; Wang, G.-C.

2012-07-15

Molybdenum films were observed to undergo a dramatic change in crystal texture orientation when the incident flux angle was varied in an oblique angle sputter deposition on amorphous substrates. Reflection high-energy electron diffraction pole figure and scanning electron microscopy were used to analyze in detail the texture orientation of the films. The normal incident deposition resulted in a fiber texture film with the minimum energy (110) crystal plane parallel to the substrate surface. A (110)[110] biaxial texture was observed for the samples grown with low incident angles of less than 45 Degree-Sign , with respect to the surface normal. Onmore » the other hand, for an oblique angle deposition of larger than 60 Degree-Sign , a (111)[112] biaxial texture was observed and appeared to be consistent with a zone T structure where the geometrically fastest growth [001] direction of a crystal plays a dominant role in defining the texture. We argue that a structural transition had occurred when the incident flux was varied from near normal incidence to a large angle.« less

Effect of oxygen on weld shape and crystallographic orientation of duplex stainless steel weld using advanced A-TIG (AA-TIG) welding method

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zou, Ying, E-mail: yingzou@jwri.osaka-u.ac.jp; Ueji, Rintaro; Fujii, Hidetoshi

The double-shielded advanced A-TIG (AA-TIG) welding method was adopted in this study for the welding of the SUS329J4L duplex stainless steel with the shielding gases of different oxygen content levels. The oxygen content in the shielding gas was controlled by altering the oxygen content in the outer layer gas, while the inner layer remained pure argon to suppress oxidation on the tungsten electrode. As a result, a deep weld penetration was obtained due to the dissolution of oxygen into the weld metals. Additionally, the microstructure of the weld metal was changed by the dissolution of oxygen. The austenite phase atmore » the ferrite grain boundary followed a Kurdjumov–Sachs (K–S) orientation relationship with the ferrite matrix phase at any oxide content. On the other hand, the orientation relationship between the intragranular austenite phase and the ferrite matrix phase exhibited different patterns under different oxygen content levels. When there was little oxide in the fusion zone, only a limited part of the intragranular austenite phase and the ferrite matrix phase followed the K–S orientation relationship. With the increase of the oxide, the correspondence of the K–S relationship increased and fit very well in the 2.5% O{sub 2} shielded sample. The investigation of this phenomenon was carried out along with the nucleation mechanisms of the intragranular austenite phases. - Highlights: • Weld penetration increased with the increase of the oxygen content. • Average diameter and number density of oxide were changed by the oxygen content. • K-S relationship of Widmanstätten austenite/ferrite wasn’t varied by oxide. • Orientation relationship of intragranular austenite/ferrite was varied by oxide.« less

Sexual-orientation differences in drinking patterns and use of drinking contexts among college students

PubMed Central

Coulter, Robert W.S.; Marzell, Miesha; Saltz, Robert; Stall, Ron; Mair, Christina

2016-01-01

Background Evidence suggests there are important sexual-orientation differences in alcohol consumption, particularly among women. Little is known about where gay/lesbian and bisexual college students drink or differences in patterns of alcohol use between heterosexual, gay/lesbian, and bisexual students. The goal of this analysis was to examine patterns of alcohol consumption—including drinking prevalence, quantity, frequency, and contexts of use—by sexual orientation. Methods Data on sexual identity, gender, drinking behaviors, and drinking contexts were examined from repeated cross-sectional samples of undergraduate students attending 14 public California universities from 2003–2011 (n=58,903). Multivariable statistical techniques were employed to examine sexual-orientation differences stratified by gender. Results Gay males, lesbians, and bisexual females were significantly more likely to report drinking alcohol in the current semester than their same-gender heterosexual peers (relative risks ranged from 1.07 to 1.10, p-values<0.01). Among current drinkers, bisexual females consumed 7 or more drinks and lesbians consumed 10 or more drinks on significantly more days than heterosexual females. On the other hand, gay male drinkers consumed 8 or more drinks on significantly fewer days than heterosexual male drinkers. Compared to their same-gender heterosexual peers: lesbian/gay and bisexual students drank less frequently at Greek parties (incidence rate ratios [IRRs] ranged from 0.52 to 0.73, p-values<0.01); lesbians (IRR=0.84, p=0.043) and bisexual males (IRR=0.82, p=0.009) drank less frequently at off-campus parties; and gay males drank more frequently outdoors (IRR=1.63, p<0.001) and at bars/restaurants (IRR=1.21, p=0.013). Conclusions Alcohol prevention programs and future research should consider sexual-orientation differences in drinking patterns and drinking contexts. PMID:26827292

The Orientation of Gastric Biopsy Samples Improves the Inter-observer Agreement of the OLGA Staging System.

PubMed

Cotruta, Bogdan; Gheorghe, Cristian; Iacob, Razvan; Dumbrava, Mona; Radu, Cristina; Bancila, Ion; Becheanu, Gabriel

2017-12-01

Evaluation of severity and extension of gastric atrophy and intestinal metaplasia is recommended to identify subjects with a high risk for gastric cancer. The inter-observer agreement for the assessment of gastric atrophy is reported to be low. The aim of the study was to evaluate the inter-observer agreement for the assessment of severity and extension of gastric atrophy using oriented and unoriented gastric biopsy samples. Furthermore, the quality of biopsy specimens in oriented and unoriented samples was analyzed. A total of 35 subjects with dyspeptic symptoms addressed for gastrointestinal endoscopy that agreed to enter the study were prospectively enrolled. The OLGA/OLGIM gastric biopsies protocol was used. From each subject two sets of biopsies were obtained (four from the antrum, two oriented and two unoriented, two from the gastric incisure, one oriented and one unoriented, four from the gastric body, two oriented and two unoriented). The orientation of the biopsy samples was completed using nitrocellulose filters (Endokit®, BioOptica, Milan, Italy). The samples were blindly examined by two experienced pathologists. Inter-observer agreement was evaluated using kappa statistic for inter-rater agreement. The quality of histopathology specimens taking into account the identification of lamina propria was analyzed in oriented vs. unoriented samples. The samples with detectable lamina propria mucosae were defined as good quality specimens. Categorical data was analyzed using chi-square test and a two-sided p value <0.05 was considered statistically significant. A total of 350 biopsy samples were analyzed (175 oriented / 175 unoriented). The kappa index values for oriented/unoriented OLGA 0/I/II/III and IV stages have been 0.62/0.13, 0.70/0.20, 0.61/0.06, 0.62/0.46, and 0.77/0.50, respectively. For OLGIM 0/I/II/III stages the kappa index values for oriented/unoriented samples were 0.83/0.83, 0.88/0.89, 0.70/0.88 and 0.83/1, respectively. No case of OLGIM IV stage was found in the present case series. Good quality histopathology specimens were described in 95.43% of the oriented biopsy samples, and in 89.14% of the unoriented biopsy samples, respectively (p=0.0275). The orientation of gastric biopsies specimens improves the inter-observer agreement for the assessment of gastric atrophy.

Birth order, sibling sex ratio, handedness, and sexual orientation of male and female participants in a BBC internet research project.

PubMed

Blanchard, Ray; Lippa, Richard A

2007-04-01

This study investigated the relations among sexual orientation, fraternal birth order (number of older brothers), and hand-preference. The participants were 87,798 men and 71,981 women who took part in a Web-based research project sponsored by the British Broadcasting Corporation (BBC). The results yielded some evidence confirming prior findings that non-right-handedness is associated with homosexuality in men and women, that older brothers increase the odds of homosexuality in men, and that the effect of older brothers on sexual orientation is limited to right-handed men. The evidence was weaker than in previous studies, however, probably because the usual relations among the variables of interest were partially obscured by the effects of other factors. Thus, the homosexual men and women had higher rates of non-right-handedness than their heterosexual counterparts, but the strongest handedness finding for both sexes was a marked tendency for participants who described themselves as ambidextrous also to describe themselves as bisexual. The birth order data were strongly affected by a tendency for the male participants to report an excess of older sisters, and the female participants to report an excess of older brothers. Statistical analyses confirmed that this was an artifact of the parental stopping rule, "Continue having children until you have offspring of both sexes." In subsequent analyses, participants were divided into those who did and did not have younger siblings, on the grounds that the data of the former would be less contaminated by the stopping rule. In the former subsample, the right-handed homo/bisexual males showed the typical high ratio of older brothers to older sisters, whereas the non-right-handed homo/bisexual males did not.

Preceptors' perceptions of the elements of a successful and an unsuccessful orientation period for newly graduated nurses.

PubMed

Lindfors, Kirsi; Meretoja, Riitta; Kaunonen, Marja; Paavilainen, Eija

2018-04-01

To identify existing orientation patterns and to find elements that may enhance or impede successful orientation of newly graduated nurses. Preceptors have first-hand information concerning orientation and their opinions should not be forgotten when organisations develop their orientation processes. An open-ended questionnaire was undertaken to collect data from preceptors (n = 172) about the current orientation patterns. Data were analysed by using deductive content analysis and by quantifying the phrases. Communal commitment to the orientation process, strong professional orientation know-how and supportive leadership were the enhancing elements of successful orientation. Complex interpersonal relationship problems during orientation, inadequate orientation resources and the organisation's structural and functional problems were the impeding elements of successful orientation. With the elements of successful orientation we ensure a supportive transition to practice for newly graduate nurses and possibilities to focus on good orientation practices for preceptors. Nurse leaders play an important part in ensuring newly graduated nurses have a safe nursing career starting point and, for preceptors, opportunities to provide orientation that is as good as possible. Supportive leadership, sufficient resources and good interpersonal relationships should be the leading principles during newly graduated nurses' orientation period. © 2017 John Wiley & Sons Ltd.

3D reconstruction of pentacene structural organization in top-contact OTFTs via resonant soft X-ray reflectivity

NASA Astrophysics Data System (ADS)

Capelli, Raffaella; Nardi, Marco Vittorio; Toccoli, Tullio; Verucchi, Roberto; Dinelli, Franco; Gelsomini, Carolina; Koshmak, Konstantin; Giglia, Angelo; Nannarone, Stefano; Pasquali, Luca

2018-01-01

Herein, we describe the use of soft X-ray reflectivity at the carbon K-edge to study the molecular organization (orientation, structure, and morphology) of pentacene active films in a top-contact transistor geometry. This technique is not affected by sample charging, and it can be applied in the case of insulating substrates. In addition, the sampling depth is not limited to the near-surface region, giving access to buried device interfaces (metal/organic and dielectric/organic). Spectral lineshape simulations, based on ab-initio calculations using a realistic 3D layer-by-layer model, allow us to unravel the details of the molecular organization in all the specific and crucial areas of the active film, overcoming the limitations of conventional approaches. The tilt angle of the long molecular axis in the whole film is found to progressively decrease with respect to the substrate normal from 25° to 0° with the increasing film thickness. A full vertical alignment, optimal for in-plane charge hopping, is reached only after the complete formation of the first five monolayers. Remarkably, starting from the first one in contact with the dielectric substrate, all the monolayers in the stack show a change in orientation with the increasing thickness. On the other hand, at the buried interface with a gold top-contact, the molecules assume a flat orientation that only propagates for two or three monolayers into the organic film. Top-contact devices with the highest performances can thus be obtained using films of at least ten monolayers. This explains the observed thickness dependence of charge mobility in pentacene transistors.

Digital altruists: Resolving key questions about the empathy-altruism hypothesis in an Internet sample.

PubMed

McAuliffe, William H B; Forster, Daniel E; Philippe, Joachner; McCullough, Michael E

2018-06-01

Researchers have identified the capacity to take the perspective of others as a precursor to empathy-induced altruistic motivation. Consequently, investigators frequently use so-called perspective-taking instructions to manipulate empathic concern. However, most experiments using perspective-taking instructions have had modest sample sizes, undermining confidence in the replicability of results. In addition, it is unknown whether perspective-taking instructions work because they increase empathic concern or because comparison conditions reduce empathic concern (or both). Finally, some researchers have found that egoistic factors that do not involve empathic concern, including self-oriented emotions and self-other overlap, mediate the relationship between perspective-taking instructions and helping. The present investigation was a high-powered, preregistered effort that addressed methodological shortcomings of previous experiments to clarify how and when perspective-taking manipulations affect emotional arousal and prosocial motivation in a prototypical experimental paradigm administered over the Internet. Perspective-taking instructions did not clearly increase empathic concern; this null finding was not due to ceiling effects. Instructions to remain objective, on the other hand, unequivocally reduced empathic concern relative to a no-instructions control condition. Empathic concern was the most strongly felt emotion in all conditions, suggesting that distressed targets primarily elicit other-oriented concern. Empathic concern uniquely predicted the quality of social support provided to the target, which supports the empathy-altruism hypothesis and contradicts the role of self-oriented emotions and self-other overlap in explaining helping behavior. Empathy-induced altruism may be responsible for many prosocial acts that occur in everyday settings, including the increasing number of prosocial acts that occur online. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Mirror writing: a tachistoscopic study of a woman suffering from migraine when writing with the right hand.

PubMed

Nakano, Mitsuko; Tanaka, Shigeki; Izuno, Kenji; Ichihara, Shigeru

2012-01-01

An experimental study was conducted with a young woman who had suddenly developed mirror writing in the right hand, which she used for writing. She was not cured for eight years. The patient was ambidextrous and had no medical complaints except for migraine with perceptual and sensory abnormalities, and an enlarged cavity of the septum pellucidum. A previous study using functional magnetic resonance imaging (fMRI), conducted when she imagined letters and wrote letters in the air with either hand, indicated that both her cerebral hemispheres were active. In the present study three experiments were conducted using a tachistoscope to explore the stage in the cognitive process when directional errors emerged. In the experiments, after independently being presented with Attneave's meaningless figures or letters to each hemisphere, participants were requested to do the following: (a) verbally respond whether the orientation of two consecutively shown figures were the same or different and the letters were standard or reversed; (b) distinguish the orientations with right and left hand movements other than by writing (by pushing a button); and (c) reproduce the stimuli (drawing) immediately after the presentation. Results showed a higher rate of incorrect directions only when drawings were reproduced by the right hand. Results also indicated that the woman's inaccurate judgment in direction emerged only when in writing and not at the perceptual level, or when responding with hand movements other than writing. Her migraine was cured after five years following the experiment. The mirror writing was cured 2-3 months later.

The hand-hold polarization-sensitive spectral domain optical coherence and its applications

NASA Astrophysics Data System (ADS)

Liu, Hao; Gao, Wanrong

2017-08-01

The polarization-sensitive spectral domain optical coherence tomography (PSOCT) has the advantages of being able to measure the polarization properties of samples, such as phase-retardation, diattenuation, depolarization, and optical axis orientation, providing a contrast to identify the diseased area and normal area in tissues in PSOCT images. Conventionally, the sample arm of PSOCT is fixed on the stage where biomedical tissues or models is placed, and the OCT images is acquired by scanning with a galvanometer-based mirror. To be applied in the practical diagnosis, a promising way is to design a hand-held device. To this end, it is required that probe is assembled with a small volume to allow for comprehensively imaging large tissues areas at a microscopic scale, and is available to move on different samples to be acquired quickly with negligible motion artifacts. Meanwhile, the probe should be manufactured wih well stability to avoid system jitter error while it is used to detect the biological tissues in vivo. In this work, a design of a hand-hold fiber-based PSOCT is described. The device is of the size of 10 cm (length) × 8 cm (width) × 6 cm (height). Both the axial resolution and the imaging depth of the system are measured and were approximately 7 μm and 2.5 mm in air, respectively, which are in good agreement with the theoretical predictions. The A-scan rate of the system is 70 kHz. The structure is compact and all the components are fixed on the shell to reduce the motion artifact, resulting in a great stability on measuring the tissues in vivo. The cross sectional images of ex vivo chicken breast, ex vivo pork cartilage and in vivo forearm skin of human wolunteer are presented to demonstrate the capability of the system.

Palm boards are not action measures: an alternative to the two-systems theory of geographical slant perception.

PubMed

Durgin, Frank H; Hajnal, Alen; Li, Zhi; Tonge, Natasha; Stigliani, Anthony

2010-06-01

Whereas most reports of the perception of outdoor hills demonstrate dramatic overestimation, estimates made by adjusting a palm board are much closer to the true hill orientation. We test the dominant hypothesis that palm board accuracy is related to the need for motor action to be accurately guided and conclude instead that the perceptual experience of palm-board orientation is biased and variable due to poorly calibrated proprioception of wrist flexion. Experiments 1 and 3 show that wrist-flexion palm boards grossly underestimate the orientations of near, reachable surfaces whereas gesturing with a free hand is fairly accurate. Experiment 2 shows that palm board estimates are much lower than free hand estimates for an outdoor hill as well. Experiments 4 shows that wrist flexion is biased and noisy compared to elbow flexion, while Experiment 5 shows that small changes in palm board height produce large changes in palm board estimates. Together, these studies suggest that palm boards are biased and insensitive measures. The existing literature arguing that there are two systems in the perception of geographical slant is re-evaluated, and a new theoretical framework is proposed in which a single exaggerated representation of ground-surface orientation guides both action and perception. Copyright 2010 Elsevier B.V. All rights reserved.

Gaussian Multiscale Aggregation Applied to Segmentation in Hand Biometrics

PubMed Central

de Santos Sierra, Alberto; Ávila, Carmen Sánchez; Casanova, Javier Guerra; del Pozo, Gonzalo Bailador

2011-01-01

This paper presents an image segmentation algorithm based on Gaussian multiscale aggregation oriented to hand biometric applications. The method is able to isolate the hand from a wide variety of background textures such as carpets, fabric, glass, grass, soil or stones. The evaluation was carried out by using a publicly available synthetic database with 408,000 hand images in different backgrounds, comparing the performance in terms of accuracy and computational cost to two competitive segmentation methods existing in literature, namely Lossy Data Compression (LDC) and Normalized Cuts (NCuts). The results highlight that the proposed method outperforms current competitive segmentation methods with regard to computational cost, time performance, accuracy and memory usage. PMID:22247658

Gaussian multiscale aggregation applied to segmentation in hand biometrics.

PubMed

de Santos Sierra, Alberto; Avila, Carmen Sánchez; Casanova, Javier Guerra; del Pozo, Gonzalo Bailador

2011-01-01

This paper presents an image segmentation algorithm based on Gaussian multiscale aggregation oriented to hand biometric applications. The method is able to isolate the hand from a wide variety of background textures such as carpets, fabric, glass, grass, soil or stones. The evaluation was carried out by using a publicly available synthetic database with 408,000 hand images in different backgrounds, comparing the performance in terms of accuracy and computational cost to two competitive segmentation methods existing in literature, namely Lossy Data Compression (LDC) and Normalized Cuts (NCuts). The results highlight that the proposed method outperforms current competitive segmentation methods with regard to computational cost, time performance, accuracy and memory usage.

Effect of hydrogenation conditions on the microstructure and mechanical properties of zirconium hydride

NASA Astrophysics Data System (ADS)

Muta, Hiroaki; Nishikane, Ryoji; Ando, Yusuke; Matsunaga, Junji; Sakamoto, Kan; Harjo, Stefanus; Kawasaki, Takuro; Ohishi, Yuji; Kurosaki, Ken; Yamanaka, Shinsuke

2018-03-01

Precipitation of brittle zirconium hydrides deteriorate the fracture toughness of the fuel cladding tubes of light water reactor. Although the hydride embrittlement has been studied extensively, little is known about physical properties of the hydride due to the experimental difficulties. In the present study, to elucidate relationship between mechanical properties and microstructure, two δ-phase zirconium hydrides and one ε-phase zirconium hydride were carefully fabricated considering volume changes at the metal-to-hydride transformation. The δ-hydride that was fabricated from α-zirconium exhibits numerous inner cracks due to the large volume change. Analyses of the neutron diffraction pattern and electron backscatter diffraction (EBSD) data show that the sample displays significant stacking faults in the {111} plane and in the pseudo-layered microstructure. On the other hand, the δ-hydride sample fabricated from β-zirconium at a higher temperature displays equiaxed grains and no cracks. The strong crystal orientation dependence of mechanical properties were confirmed by indentation test and EBSD observation. The δ-hydride hydrogenated from α-zirconium displays a lower Young's modulus than that prepared from β-zirconium. The difference is attributed to stacking faults within the {111} plane, for which the Young's modulus exhibits the highest value in the perpendicular direction. The strong influence of the crystal orientation and dislocation density on the mechanical properties should be considered when evaluating hydride precipitates in nuclear fuel cladding.

Arabic sign language recognition based on HOG descriptor

NASA Astrophysics Data System (ADS)

Ben Jmaa, Ahmed; Mahdi, Walid; Ben Jemaa, Yousra; Ben Hamadou, Abdelmajid

2017-02-01

We present in this paper a new approach for Arabic sign language (ArSL) alphabet recognition using hand gesture analysis. This analysis consists in extracting a histogram of oriented gradient (HOG) features from a hand image and then using them to generate an SVM Models. Which will be used to recognize the ArSL alphabet in real-time from hand gesture using a Microsoft Kinect camera. Our approach involves three steps: (i) Hand detection and localization using a Microsoft Kinect camera, (ii) hand segmentation and (iii) feature extraction using Arabic alphabet recognition. One each input image first obtained by using a depth sensor, we apply our method based on hand anatomy to segment hand and eliminate all the errors pixels. This approach is invariant to scale, to rotation and to translation of the hand. Some experimental results show the effectiveness of our new approach. Experiment revealed that the proposed ArSL system is able to recognize the ArSL with an accuracy of 90.12%.

Family factors related to children's intrinsic/extrinsic motivational orientation and academic performance.

PubMed

Ginsburg, G S; Bronstein, P

1993-10-01

This study examined 3 familial factors--parental surveillance of homework, parental reactions to grades, and general family style--in relation to children's motivational orientation and academic performance. Family, parent, and child measures were obtained in the home from 93 fifth graders and their parents. Teachers provided a measure of classroom motivational orientation, and grades and achievement scores were obtained from school records. Higher parental surveillance of homework, parental reactions to grades that included negative control, uninvolvement, or extrinsic reward, and over- and undercontrolling family styles were found to be related to an extrinsic motivational orientation and to lower academic performance. On the other hand, parental encouragement in response to grades children received was associated with an intrinsic motivational orientation, and autonomy-supporting family styles were associated with intrinsic motivation and higher academic performance. In addition, socioeconomic level was a significant predictor of motivational orientation and academic performance.

Accuracy and confidence of visual short-term memory do not go hand-in-hand: behavioral and neural dissociations.

PubMed

Bona, Silvia; Silvanto, Juha

2014-01-01

Currently influential models of working memory posit that memory content is highly accessible to conscious inspection. These models predict that metacognition of memory performance should go hand-in-hand with the accuracy of the underlying memory representation. To test this view, we investigated how visual information presented during the maintenance period affects VSTM accuracy and confidence. We used a delayed cue-target orientation discrimination task in which participants were asked to hold in memory a grating, and during the maintenance period a second memory cue could be presented. VSTM accuracy of the first memory cue was impaired when the orientation of the second memory cue was sufficiently different. However, participants' response confidence was reduced whenever the second memory cue was presented; thus VSTM accuracy and confidence were dissociated. In a second experiment, we applied transcranial direct current stimulation (tDCS) over the right dorsolateral prefrontal cortex (DLPFC) to investigate the causal role of this region in VSTM metacognition. Relative to the sham condition, anodal tDCS induced a general reduction in confidence ratings but did not affect VSTM accuracy. Overall, these results indicate that our metacognition of memory performance is influenced by factors other than the accuracy of the underlying memory representation.

Accuracy and Confidence of Visual Short-Term Memory Do Not Go Hand-In-Hand: Behavioral and Neural Dissociations

PubMed Central

Bona, Silvia; Silvanto, Juha

2014-01-01

Currently influential models of working memory posit that memory content is highly accessible to conscious inspection. These models predict that metacognition of memory performance should go hand-in-hand with the accuracy of the underlying memory representation. To test this view, we investigated how visual information presented during the maintenance period affects VSTM accuracy and confidence. We used a delayed cue–target orientation discrimination task in which participants were asked to hold in memory a grating, and during the maintenance period a second memory cue could be presented. VSTM accuracy of the first memory cue was impaired when the orientation of the second memory cue was sufficiently different. However, participants' response confidence was reduced whenever the second memory cue was presented; thus VSTM accuracy and confidence were dissociated. In a second experiment, we applied transcranial direct current stimulation (tDCS) over the right dorsolateral prefrontal cortex (DLPFC) to investigate the causal role of this region in VSTM metacognition. Relative to the sham condition, anodal tDCS induced a general reduction in confidence ratings but did not affect VSTM accuracy. Overall, these results indicate that our metacognition of memory performance is influenced by factors other than the accuracy of the underlying memory representation. PMID:24663094

A neural network simulating human reach-grasp coordination by continuous updating of vector positioning commands.

PubMed

Ulloa, Antonio; Bullock, Daniel

2003-10-01

We developed a neural network model to simulate temporal coordination of human reaching and grasping under variable initial grip apertures and perturbations of object size and object location/orientation. The proposed model computes reach-grasp trajectories by continuously updating vector positioning commands. The model hypotheses are (1) hand/wrist transport, grip aperture, and hand orientation control modules are coupled by a gating signal that fosters synchronous completion of the three sub-goals. (2) Coupling from transport and orientation velocities to aperture control causes maximum grip apertures that scale with these velocities and exceed object size. (3) Part of the aperture trajectory is attributable to an aperture-reducing passive biomechanical effect that is stronger for larger apertures. (4) Discrepancies between internal representations of targets partially inhibit the gating signal, leading to movement time increases that compensate for perturbations. Simulations of the model replicate key features of human reach-grasp kinematics observed under three experimental protocols. Our results indicate that no precomputation of component movement times is necessary for online temporal coordination of the components of reaching and grasping.

X-ray vector radiography of a human hand

NASA Astrophysics Data System (ADS)

Jud, Christoph; Braig, Eva; Dierolf, Martin; Eggl, Elena; Günther, Benedikt; Achterhold, Klaus; Gleich, Bernhard; Rummeny, Ernst; Noël, Peter; Pfeiffer, Franz; Münzel, Daniela

2017-03-01

Grating based x-ray phase-contrast reveals differential phase-contrast (DPC) and dark-field contrast (DFC) on top of the conventional absorption image. X-ray vector radiography (XVR) exploits the directional dependence of the DFC and yields the mean scattering strength, the degree of anisotropy and the orientation of scattering structures by combining several DFC-projections. Here, we perform an XVR of an ex vivo human hand specimen. Conventional attenuation images have a good contrast between the bones and the surrounding soft tissue. Within the bones, trabecular structures are visible. However, XVR detects subtler differences within the trabecular structure: there is isotropic scattering in the extremities of the phalanx in contrast to anisotropic scattering in its body. The orientation changes as well from relatively random in the extremities to an alignment along the longitudinal trabecular orientation in the body. In the other bones measured, a similar behavior was found. These findings indicate a deeper insight into the anatomical configuration using XVR compared to conventional radiography. Since microfractures cause a discontinuous trabecular structure, XVR could help to detect so-called radiographically occult fractures of the trabecular bones.

Infrared study on the molecular orientation in bulk-heterojunction films based on perylene and 3,4,9,10-perylenetetracarboxylic dianhydride

NASA Astrophysics Data System (ADS)

Seto, Keisuke; Pham, John; Furukawa, Yukio

2012-03-01

Solid-state structures of thin blend films of perylene and 3,4,9,10-perylenetetracarboxylic dianhydride (PTCDA) formed on the Au surface have been studied by a combination of infrared reflection-absorption spectroscopy and the RATIO method of Debe. In the blend films, PTCDA molecules take the face-on orientation in the whole range of PTCDA contents from 7.5 to 88 mol%. On the other hand, the molecular orientation of perylene molecules changes from edge-on toward random as the PTCDA content increases.

Tablet Keyboard Configuration Affects Performance, Discomfort and Task Difficulty for Thumb Typing in a Two-Handed Grip

PubMed Central

Trudeau, Matthieu B.; Catalano, Paul J.; Jindrich, Devin L.; Dennerlein, Jack T.

2013-01-01

When holding a tablet computer with two hands, the touch keyboard configuration imposes postural constraints on the user because of the need to simultaneously hold the device and type with the thumbs. Designers have provided users with several possible keyboard configurations (device orientation, keyboard layout and location). However, potential differences in performance, usability and postures among these configurations have not been explored. We hypothesize that (1) the narrower standard keyboard layout in the portrait orientation leads to lower self-reported discomfort and less reach than the landscape orientation; (2) a split keyboard layout results in better overall outcomes compared to the standard layout; and (3) the conventional bottom keyboard location leads to the best outcomes overall compared to other locations. A repeated measures laboratory experiment of 12 tablet owners measured typing speed, discomfort, task difficulty, and thumb/wrist joint postures using an active marker system during typing tasks for different combinations of device orientation (portrait and landscape), keyboard layout (standard and split), and keyboard location (bottom, middle, top). The narrower standard keyboard with the device in the portrait orientation was associated with less discomfort (least squares mean (and S.E.) 2.9±0.6) than the landscape orientation (4.5±0.7). Additionally, the split keyboard decreased the amount of reaching required by the thumb in the landscape orientation as defined by a reduced range of motion and less MCP extension, which may have led to reduced discomfort (2.7±0.6) compared to the standard layout (4.5±0.7). However, typing speed was greater for the standard layout (127±5 char./min.) compared to the split layout (113±4 char./min.) regardless of device orientation and keyboard location. Usage guidelines and designers can incorporate these findings to optimize keyboard design parameters and form factors that promote user performance and usability for thumb interaction. PMID:23840730

Tablet Keyboard Configuration Affects Performance, Discomfort and Task Difficulty for Thumb Typing in a Two-Handed Grip.

PubMed

Trudeau, Matthieu B; Catalano, Paul J; Jindrich, Devin L; Dennerlein, Jack T

2013-01-01

When holding a tablet computer with two hands, the touch keyboard configuration imposes postural constraints on the user because of the need to simultaneously hold the device and type with the thumbs. Designers have provided users with several possible keyboard configurations (device orientation, keyboard layout and location). However, potential differences in performance, usability and postures among these configurations have not been explored. We hypothesize that (1) the narrower standard keyboard layout in the portrait orientation leads to lower self-reported discomfort and less reach than the landscape orientation; (2) a split keyboard layout results in better overall outcomes compared to the standard layout; and (3) the conventional bottom keyboard location leads to the best outcomes overall compared to other locations. A repeated measures laboratory experiment of 12 tablet owners measured typing speed, discomfort, task difficulty, and thumb/wrist joint postures using an active marker system during typing tasks for different combinations of device orientation (portrait and landscape), keyboard layout (standard and split), and keyboard location (bottom, middle, top). The narrower standard keyboard with the device in the portrait orientation was associated with less discomfort (least squares mean (and S.E.) 2.9±0.6) than the landscape orientation (4.5±0.7). Additionally, the split keyboard decreased the amount of reaching required by the thumb in the landscape orientation as defined by a reduced range of motion and less MCP extension, which may have led to reduced discomfort (2.7±0.6) compared to the standard layout (4.5±0.7). However, typing speed was greater for the standard layout (127±5 char./min.) compared to the split layout (113±4 char./min.) regardless of device orientation and keyboard location. Usage guidelines and designers can incorporate these findings to optimize keyboard design parameters and form factors that promote user performance and usability for thumb interaction.

Postdictive modulation of visual orientation.

PubMed

Kawabe, Takahiro

2012-01-01

The present study investigated how visual orientation is modulated by subsequent orientation inputs. Observers were presented a near-vertical Gabor patch as a target, followed by a left- or right-tilted second Gabor patch as a distracter in the spatial vicinity of the target. The task of the observers was to judge whether the target was right- or left-tilted (Experiment 1) or whether the target was vertical or not (Supplementary experiment). The judgment was biased toward the orientation of the distracter (the postdictive modulation of visual orientation). The judgment bias peaked when the target and distracter were temporally separated by 100 ms, indicating a specific temporal mechanism for this phenomenon. However, when the visibility of the distracter was reduced via backward masking, the judgment bias disappeared. On the other hand, the low-visibility distracter could still cause a simultaneous orientation contrast, indicating that the distracter orientation is still processed in the visual system (Experiment 2). Our results suggest that the postdictive modulation of visual orientation stems from spatiotemporal integration of visual orientation on the basis of a slow feature matching process.

Reconstruction of the 3-D Shape and Crystal Preferred Orientation of Olivine: A Combined X-ray µ-CT and EBSD-SEM approach

NASA Astrophysics Data System (ADS)

Kahl, Wolf-Achim; Hidas, Károly; Dilissen, Nicole; Garrido, Carlos J.; López-Sánchez Vizcaíno, Vicente; Jesús Román-Alpiste, Manuel

2017-04-01

The complete reconstruction of the microstructure of rocks requires, among others, a full description of the shape preferred orientation (SPO) and crystal preferred orientation (CPO) of the constituent mineral phases. New advances in instrumental analyses, particularly electron backscatter diffraction (EBSD) coupled to focused ion beam-scanning electron microscope (FIB-SEM), allows a complete characterization of SPO and CPO in rocks at the micron scale [1-2]. Unfortunately, the large grain size of many crystalline rocks, such as peridotite, prevents a representative characterization of the CPO and SPO of their constituent minerals by this technique. Here, we present a new approach combining X-ray micro computed tomography (µ-CT) and EBSD to reconstruct the geographically oriented, 3-D SPO and CPO of cm- to mm-sized olivine crystals in two contrasting fabric types of chlorite harzburgites (Almírez ultramafic massif, SE Spain). The semi-destructive sample treatment involves drilling of geographically oriented micro drills in the field and preparation of oriented thin sections from µ-CT scanned cores. This allows for establishing the link among geological structures, macrostructure, fabric, and 3-D SPO-CPO at the thin section scale. Based on EBSD analyses, different CPO groups of olivine crystals can be discriminated in the thin sections and allocated to 3-D SPO in the µ-CT volume data. This approach overcomes the limitations of both methods (i.e., no crystal orientation data in µ-CT and no spatial information in EBSD), hence 3-D orientation of the crystallographic axes of olivines from different orientation groups could be correlated with the crystal shapes of olivine grains. This combined µ-CT and EBSD technique enables the correlation of both SPO and CPO and representative grain size, and is capable to characterize the 3-D microstructure of olivine-bearing rocks at the hand specimen scale. REFERENCES 1. Zaefferer, S., Wright, S.I., Raabe, D., 2008. Three-Dimensional orientation microscopy in a focused ion beam-scanning electron microscope: A new dimension of microstructure characterization. Metallurgical and Materials Transactions A 39, 374-389. 2. Burnett, T.L., Kelley, R., Winiarski, B., Contreras, L., Daly, M., Gholinia, A., Burke, M.G., Withers, P.J., 2016. Large volume serial section tomography by Xe Plasma FIB dual beam microscopy. Ultramicroscopy 161, 119-129.

Optical method for the determination of grain orientation in films

DOEpatents

Maris, Humphrey J.

2001-01-01

A method for the determination of grain orientation in a film sample is provided comprising the steps of measuring a first transient optical response of the film and determining the contribution to the transient optical response arising from a change in the energy distribution of the electrons in the sample, determining the contribution to the transient optical response arising from a propagating strain pulse within the sample, and determining the contribution to the transient optical response arising from a change in sample temperature of the sample. The grain orientation of the sample may be determined using the contributions to the transient optical response arising from the change in the energy distribution of the electrons, the propagating strain pulse, and the change in sample temperature. Additionally, a method for determination of the thickness of a film sample is provided. The grain orientation of the sample is first determined. The grain orientation, together with the velocity of sound and a propagation time of a strain pulse through the sample are then used to determine the thickness of the film sample.

Optical method for the determination of grain orientation in films

DOEpatents

Maris, Humphrey J.

2003-05-13

A method for the determination of grain orientation in a film sample is provided comprising the steps of measuring a first transient optical response of the film and determining the contribution to the transient optical response arising from a change in the energy distribution of the electrons in the sample, determining the contribution to the transient optical response arising from a propagating strain pulse within the sample, and determining the contribution to the transient optical response arising from a change in sample temperature of the sample. The grain orientation of the sample may be determined using the contributions to the transient optical response arising from the change in the energy distribution of the electrons, the propagating strain pulse, and the change in sample temperature. Additionally, a method for determination of the thickness of a film sample is provided. The grain orientation of the sample is first determined. The grain orientation, together with the velocity of sound and a propagation time of a strain pulse through the sample are then used to determine the thickness of the film sample.

Hand and Grasp Selection in a Preferential Reaching Task: The Effects of Object Location, Orientation, and Task Intention.

PubMed

Scharoun, Sara M; Scanlan, Kelly A; Bryden, Pamela J

2016-01-01

As numerous movement options are available in reaching and grasping, of particular interest are what factors influence an individual's choice of action. In the current study a preferential reaching task was used to assess the propensity for right handers to select their preferred hand and grasp a coffee mug by the handle in both independent and joint action object manipulation contexts. Mug location (right-space, midline, and left-space) and handle orientation (toward, away, to left, and to right of the participant) varied in four tasks that differed as a function of intention: (1) pick-up (unimanual, independent); (2) pick-up and pour (bimanual, independent); (3) pick-up and pass (unimanual, joint action); and (4) pick-up, pour and pass (bimanual, joint action). In line with previous reports, a right-hand preference for unimanual tasks was observed. Furthermore, extending existing literature to a preferential reaching task, role differentiation between the hands in bimanual tasks (i.e., preferred hand mobilizing, non-preferred hand stabilizing) was displayed. Finally, right-hand selection was greatest in right space, albeit lower in bimanual tasks compared to what is typically reported in unimanual tasks. Findings are attributed to the desire to maximize biomechanical efficiency in reaching. Grasp postures were also observed to reflect consideration of efficiency. More specifically, within independent object manipulation (pick-up; pick-up and pour) participants only grasped the mug by the handle when it afforded a comfortable posture. Furthermore, in joint action (pick-up and pass; pick-up, pour and pass), the confederate was only offered the handle if the intended action of the confederate was similar or required less effort than that of the participant. Together, findings from the current study add to our knowledge of hand and grasp selection in unimanual and bimanual object manipulation, within the context of both independent and joint action tasks.

The neural correlates of biomechanical constraints in hand laterality judgment task performed from other person's perspective: A near-infrared spectroscopy study.

PubMed

Meng, Shuang; Oi, Misato; Saito, Godai; Saito, Hirofumi

2017-01-01

Previous studies, mainly using a first-person perspective (1PP), have shown that the judgments of the hand laterality judgment (HLJ) task are dependent on biomechanical constraints (BC). Specifically, differing reaction times (RT) for hand pictures rotated medially or laterally around the mid sagittal plane are attributed to the BC effect on motor imagery. In contrast, we investigated whether the HLJ task is also subject to BC when performed from a third-person perspective (3PP) as well as 1PP using near-infrared spectroscopy (NIRS) to measure the brain activity of prefrontal cortex (PFC) in right-handed participants assigned to 1PP or 3PP groups. The 1PP group judged whether a presented hand was their own left or right hand, and the 3PP group whether it was the other's left or right hand. Using their HLJ task error rates, the 1PP and 3PP groups were subdivided into an Error Group (EG) and No Error Group (NEG). For the 1PP group, both EG and NEG showed a significant Hand Laterality × Orientation interaction for RT, indicating the BC effect on motor imagery. For the 3PP group, however, neither EG nor NEG showed the interaction, even though EG showed a significantly longer RT than NEG. These results suggest that the 3PP EG appropriately followed the 3PP task instruction, while the NEG might have taken 1PP. However, the 3PP EG NIRS profile of left PFC showed a significant Hand Laterality × Orientation interaction, while the 1PP EG did not. More noteworthy is that the left PFC activation of EG showed an interaction between the 1PP and 3PP groups when the left hand was presented. Furthermore, in the NEG, the PFC activation was not influenced by the BC in either the 1PP or 3PP condition. These results indicate that BC interferes with the HLJ task performed from the 1PP and 3PP.

Simple apparatus for polarization sensing of analytes

NASA Astrophysics Data System (ADS)

Gryczynski, Zygmunt; Gryczynski, Ignacy; Lakowicz, Joseph R.

2000-09-01

We describe a simple device for fluorescence sensing based on an unexpansive light source, a dual photocell and a Watson bridge. The emission is detected from two fluorescent samples, one of which changes intensity in response to the analyte. The emission from these two samples is observed through two orthogonally oriented polarizers and an analyzer polarizer. The latter polarizer is rotated to yield equal intensities from both sides of the dual photocell, as determined by a zero voltage from the Watson bridge. Using this device, we are able to measure fluorescein concentration to an accuracy near 2% at 1 (mu) M fluorescein, and pH values accurate to +/- 0.02 pH units. We also use this approach with a UV hand lamp and a glucose-sensitive protein to measure glucose concentrations near 2 (mu) M to an accuracy of +/- 0.1 (mu) M. This approach requires only simple electronics, which can be battery powered. Additionally, the method is generic, and can be applied with any fluorescent sample that displays a change in intensity. One can imagine this approach being used to develop portable point-of-care clinical devices.

A methodology for the semi-automatic digital image analysis of fragmental impactites

NASA Astrophysics Data System (ADS)

Chanou, A.; Osinski, G. R.; Grieve, R. A. F.

2014-04-01

A semi-automated digital image analysis method is developed for the comparative textural study of impact melt-bearing breccias. This method uses the freeware software ImageJ developed by the National Institute of Health (NIH). Digital image analysis is performed on scans of hand samples (10-15 cm across), based on macroscopic interpretations of the rock components. All image processing and segmentation are done semi-automatically, with the least possible manual intervention. The areal fraction of components is estimated and modal abundances can be deduced, where the physical optical properties (e.g., contrast, color) of the samples allow it. Other parameters that can be measured include, for example, clast size, clast-preferred orientations, average box-counting dimension or fragment shape complexity, and nearest neighbor distances (NnD). This semi-automated method allows the analysis of a larger number of samples in a relatively short time. Textures, granulometry, and shape descriptors are of considerable importance in rock characterization. The methodology is used to determine the variations of the physical characteristics of some examples of fragmental impactites.

Improved ultrasonic TV images achieved by use of Lamb-wave orientation technique

NASA Technical Reports Server (NTRS)

Berger, H.

1967-01-01

Lamb-wave sample orientation technique minimizes the interference from standing waves in continuous wave ultrasonic television imaging techniques used with thin metallic samples. The sample under investigation is oriented such that the wave incident upon it is not normal, but slightly angled.

Use of alternative tobacco products in multiethnic youth from Jujuy, Argentina.

PubMed

Alderete, Ethel; Kaplan, Celia Patricia; Gregorich, Steven E; Pérez-Stable, Eliseo J

2010-01-01

This study examines alternative tobacco use among Latin American youth. A self-administered survey in a random sample of 27 schools was administered in 2004 in Jujuy, Argentina (N = 3218). Prevalence of alternative tobacco product use was 24.1%; 15.3% of youth used hand-rolled cigarettes, 7.8% smoked cigars, 2.3% chewed tobacco leaf and 1.6% smoked pipe. Among youth who never smoked manufactured cigarettes, alternative product use was rare (2.9%), except for chewing tobacco (22%). In multivariate logistic regression boys were more likely than girls to smoke pipe (OR = 3.1; 95% CI 1.1-8.7); indigenous language was associated with smoking hand-rolled cigarettes (OR = 1.4; 95% CI-1.1-1.9) and pipe (OR = 2.2; 95% CI 1.5-3.4). Working in tobacco sales was a risk factor for chewing tobacco (OR = 2.9; 95% CI: 1.7-4.9) and smoking hand-rolled cigarettes (OR = 1.4; 95% CI 1.1-1.8). Having friends who smoked was associated with chewing tobacco (OR = 1.8; 95% CI 1.0-3.2) and with smoking cigars (OR = 2.1; 95% CI 1.5-2.9). Current drinking and thrill-seeking orientation were associated with cigars and pipe smoking. Findings highlight the importance of surveillance of alternative tobacco products use and availability among youth and for addressing identified risk factors.

Effects of Consideration of Future Consequences and Temporal Framing on Acceptance of the HPV Vaccine Among Young Adults.

PubMed

Kim, Jarim; Nan, Xiaoli

2016-09-01

This study examines how individual difference in consideration of future consequences (CFC) and temporal framing (i.e., present- vs. future-oriented message) interact to influence the persuasive outcomes of a health message promoting human papillomavirus (HPV) vaccination among young adults. Results of an experiment (N = 416) showed a significant interaction effect of CFC and temporal framing on persuasion. The nature of the interaction suggested that individuals with high CFC generally were more persuaded by the present-oriented messages, compared to the future-oriented messages. On the other hand, those with low CFC responded similarly to the present- and future-oriented messages. Implications of the findings for HPV vaccination messaging are discussed.

Mobile Phone Use Behaviors and Postures on Public Transportation Systems.

PubMed

Liang, Huey-Wen; Hwang, Yaw-Huei

2016-01-01

Mobile phones are common in our daily life, but the users' preferences for postures or screen operating styles have not been studied. This was a cross-sectional and observational study. We randomly sampled passengers who used mobile phones on the Mass Rapid Transit (MRT) system in metropolitan Taipei. A checklist was used to observe their body postures and screen operating styles while sitting or standing. As a result, 1,230 subjects from 400 trips were observed. Overall, of all the passengers who were sitting, 41% of them were using mobile phones. The majority of the tasks involved browsing (84%) with their phones in a portrait orientation (93%). Different-hand holding/operating was the most commonly used operating style while sitting (46%) and same-hand holding/operating was the most common while standing (46%). The distribution of screen operating styles was significantly different for those sitting than for those standing and for different genders and age groups. The most frequently observed postures while sitting were having one's trunk against a backrest, feet on the floor and with or without an arm supported (58%). As for the users who were standing, the both- and different-hands groups had a high proportion of arms unsupported, feet on the floor and either their trunk supported or not. In contrast, the same-hand group tended to have their trunk unsupported, were holding a pole or handstrap and had both feet on floor. Further studies are warranted to characterize the ergonomic exposure of these commonly used postures and operating styles, and our results will help guide the selection of experimental conditions for laboratory settings.

Finger length ratio (2D:4D) in adults with gender identity disorder.

PubMed

Kraemer, Bernd; Noll, Thomas; Delsignore, Aba; Milos, Gabriella; Schnyder, Ulrich; Hepp, Urs

2009-06-01

From early childhood, gender identity and the 2nd to 4th finger length ratio (2D:4D) are discriminative characteristics between sexes. Both the human brain and 2D:4D may be influenced by prenatal testosterone levels. This calls for an examination of 2D:4D in patients with gender identity disorder (GID) to study the possible influence of prenatal testosterone on gender identity. Until now, the only study carried out on this issue suggests lower prenatal testosterone levels in right-handed male-to-female GID patients (MtF). We compared 2D:4D of 56 GID patients (39 MtF; 17 female-to-male GID patients, FtM) with data from a control sample of 176 men and 190 women. Bivariate group comparisons showed that right hand 2D:4D in MtF was significantly higher (feminized) than in male controls, but similar to female controls. The comparison of 2D:4D ratios of biological women revealed significantly higher (feminized) values for right hands of right handed FtM. Analysis of variance confirmed significant effects for sex and for gender identity on 2D:4D ratios but not for sexual orientation or for the interaction among variables. Our results indirectly point to the possibility of a weak influence of reduced prenatal testosterone as an etiological factor in the multifactorially influenced development of MtF GID. The development of FtM GID seems even more unlikely to be notably influenced by prenatal testosterone.

[Patient orientation and reference to the ICF as challenges in outcome assessment in rehabilitation].

PubMed

Farin, E

2008-04-01

Measuring the results of rehabilitation interventions presents a number of issues regarding content and method, two of which have been selected for discussion in view of the findings of current research--the significance of patient orientation and the relation to the International Classification of Functioning, Disability and Health, ICF. Compilation of patients' treatment goals, expectations and preferences, patient participation in the development of assessment instruments, compilation of patients' evaluations of treatment results and consideration of the subjectivity of the physician as well as interaction between patient and physician were discussed with respect to involving patients in measuring results. The ICF is a terminology system presenting a uniform international classification for describing health conditions that could assume the function of a common language for the members of various occupations involved in medical rehabilitation. Orienting the measurement of results to the ICF is an obvious next step. This can promote patient orientation, as the categories used by the ICF--in particular for the domains of activities and participation--are formulated in terms relevant to daily routine and are thus pertinent to the patients' lifestyle. The consequences resulting from this overview concern future research needs on the one hand, and on the other hand tips for carrying out a patient-oriented, ICF-based measurement of results. The need for research becomes especially clear regarding the measurement of results based on patient preferences, the determination of the participation relevance perceived by the patient as a criterion for "patient significance" (analogous to "clinical significance"), the integration and weighting of patient and physician assessments of success, the consideration of physicians' subjective concepts and patients' communication preferences, and the design of new, ICF-oriented assessment instruments.

Automatic segmentation of bones from digital hand radiographs

NASA Astrophysics Data System (ADS)

Liu, Brent J.; Taira, Ricky K.; Shim, Hyeonjoon; Keaton, Patricia

1995-05-01

The purpose of this paper is to develop a robust and accurate method that automatically segments phalangeal and epiphyseal bones from digital pediatric hand radiographs exhibiting various stages of growth. The algorithm uses an object-oriented approach comprising several stages beginning with the most general objects to be segmented, such as the outline of the hand from background, and proceeding in a succession of stages to the most specific object, such as a specific phalangeal bone from a digit of the hand. Each stage carries custom operators unique to the needs of that specific stage which will aid in more accurate results. The method is further aided by a knowledge base where all model contours and other information such as age, race, and sex, are stored. Shape models, 1-D wrist profiles, as well as an interpretation tree are used to map model and data contour segments. Shape analysis is performed using an arc-length orientation transform. The method is tested on close to 340 phalangeal and epiphyseal objects to be segmented from 17 cases of pediatric hand images obtained from our clinical PACS. Patient age ranges from 2 - 16 years. A pediatric radiologist preliminarily assessed the results of the object contours and were found to be accurate to within 95% for cases with non-fused bones and to within 85% for cases with fused bones. With accurate and robust results, the method can be applied toward areas such as the determination of bone age, the development of a normal hand atlas, and the characterization of many congenital and acquired growth diseases. Furthermore, this method's architecture can be applied to other image segmentation problems.

Sensory stimulation augments the effects of massed practice training in persons with tetraplegia.

PubMed

Beekhuizen, Kristina S; Field-Fote, Edelle C

2008-04-01

To compare functional changes and cortical neuroplasticity associated with hand and upper extremity use after massed (repetitive task-oriented practice) training, somatosensory stimulation, massed practice training combined with somatosensory stimulation, or no intervention, in persons with chronic incomplete tetraplegia. Participants were randomly assigned to 1 of 4 groups: massed practice training combined with somatosensory peripheral nerve stimulation (MP+SS), somatosensory peripheral nerve stimulation only (SS), massed practice training only (MP), and no intervention (control). University medical school setting. Twenty-four subjects with chronic incomplete tetraplegia. Intervention sessions were 2 hours per session, 5 days a week for 3 weeks. Massed practice training consisted of repetitive practice of functional tasks requiring skilled hand and upper-extremity use. Somatosensory stimulation consisted of median nerve stimulation with intensity set below motor threshold. Pre- and post-testing assessed changes in functional hand use (Jebsen-Taylor Hand Function Test), functional upper-extremity use (Wolf Motor Function Test), pinch grip strength (key pinch force), sensory function (monofilament testing), and changes in cortical excitation (motor evoked potential threshold). The 3 groups showed significant improvements in hand function after training. The MP+SS and SS groups had significant improvements in upper-extremity function and pinch strength compared with the control group, but only the MP+SS group had a significant change in sensory scores compared with the control group. The MP+SS and MP groups had greater change in threshold measures of cortical excitability. People with chronic incomplete tetraplegia obtain functional benefits from massed practice of task-oriented skills. Somatosensory stimulation appears to be a valuable adjunct to training programs designed to improve hand and upper-extremity function in these subjects.

Genotypes and enterotoxicity of Staphylococcus aureus isolated from the hands and nasal cavities of flight-catering employees.

PubMed

Hatakka, M; Björkroth, K J; Asplund, K; Mäki-Petäys, N; Korkeala, H J

2000-11-01

Hand and nasal samples of flight-catering staff were collected from 1995 to 1997 to find employees carrying Staphylococcus aureus. Altogether 153 hand samples and 136 nose samples were taken. Nasal sampling showed a higher prevalence of S. aureus among food handlers (29%) than hand sampling (9%). A high proportion of the strains (46%) were enterotoxigenic, and a considerable amount of food handlers carried enterotoxigenic S. aureus, 6% and 12% according to hand and nasal sampling, respectively. Pulsed-field gel electrophoresis macrorestriction profiles revealed a total of 32 different types associated with the 35 employees carrying S. aureus. In most cases, the same type colonized both the hand and nose of a person. Despite the wide variety of types found, one strain colonized five persons and the second most common strain was associated with four food handlers. The predominant toxin produced was B, which was produced by the most common strain. The results showed that nasal sampling is a good way to detect S. aureus carriers, whereas hand sampling may fail to reveal carriers. The high proportion of enterotoxigenic strains show that a food handler harboring S. aureus must be considered a potential source of enterotoxigenic strains for airline meals.

Autonomous learning in gesture recognition by using lobe component analysis

NASA Astrophysics Data System (ADS)

Lu, Jian; Weng, Juyang

2007-02-01

Gesture recognition is a new human-machine interface method implemented by pattern recognition(PR).In order to assure robot safety when gesture is used in robot control, it is required to implement the interface reliably and accurately. Similar with other PR applications, 1) feature selection (or model establishment) and 2) training from samples, affect the performance of gesture recognition largely. For 1), a simple model with 6 feature points at shoulders, elbows, and hands, is established. The gestures to be recognized are restricted to still arm gestures, and the movement of arms is not considered. These restrictions are to reduce the misrecognition, but are not so unreasonable. For 2), a new biological network method, called lobe component analysis(LCA), is used in unsupervised learning. Lobe components, corresponding to high-concentrations in probability of the neuronal input, are orientation selective cells follow Hebbian rule and lateral inhibition. Due to the advantage of LCA method for balanced learning between global and local features, large amount of samples can be used in learning efficiently.

Rehabilitation robotics for the upper extremity: review with new directions for orthopaedic disorders.

PubMed

Hakim, Renée M; Tunis, Brandon G; Ross, Michael D

2017-11-01

The focus of research using technological innovations such as robotic devices has been on interventions to improve upper extremity function in neurologic populations, particularly patients with stroke. There is a growing body of evidence describing rehabilitation programs using various types of supportive/assistive and/or resistive robotic and virtual reality-enhanced devices to improve outcomes for patients with neurologic disorders. The most promising approaches are task-oriented, based on current concepts of motor control/learning and practice-induced neuroplasticity. Based on this evidence, we describe application and feasibility of virtual reality-enhanced robotics integrated with current concepts in orthopaedic rehabilitation shifting from an impairment-based focus to inclusion of more intense, task-specific training for patients with upper extremity disorders, specifically emphasizing the wrist and hand. The purpose of this paper is to describe virtual reality-enhanced rehabilitation robotic devices, review evidence of application in patients with upper extremity deficits related to neurologic disorders, and suggest how this technology and task-oriented rehabilitation approach can also benefit patients with orthopaedic disorders of the wrist and hand. We will also discuss areas for further research and development using a task-oriented approach and a commercially available haptic robotic device to focus on training of grasp and manipulation tasks. Implications for Rehabilitation There is a growing body of evidence describing rehabilitation programs using various types of supportive/assistive and/or resistive robotic and virtual reality-enhanced devices to improve outcomes for patients with neurologic disorders. The most promising approaches using rehabilitation robotics are task-oriented, based on current concepts of motor control/learning and practice-induced neuroplasticity. Based on the evidence in neurologic populations, virtual reality-enhanced robotics may be integrated with current concepts in orthopaedic rehabilitation shifting from an impairment-based focus to inclusion of more intense, task-specific training for patients with UE disorders, specifically emphasizing the wrist and hand. Clinical application of a task-oriented approach may be accomplished using commercially available haptic robotic device to focus on training of grasp and manipulation tasks.

Emotion-Oriented Coping, Avoidance Coping, and Fear of Pain as Mediators of the Relationship between Positive Affect, Negative Affect, and Pain-Related Distress among African American and Caucasian College Women

ERIC Educational Resources Information Center

Lightsey, Owen Richard, Jr.; Wells, Anita G.; Wang, Mei-Chuan; Pietruszka, Todd; Ciftci, Ayse; Stancil, Brett

2009-01-01

The authors tested whether coping styles and fear of pain mediate the relationship between positive affect and negative affect on one hand and pain-related distress (PD) on the other. Among African American and Caucasian female college students, negative affect, fear of pain, and emotion-oriented coping together accounted for 34% of the variance…

Learning Kinematic Constraints in Laparoscopic Surgery

PubMed Central

Huang, Felix C.; Mussa-Ivaldi, Ferdinando A.; Pugh, Carla M.; Patton, James L.

2012-01-01

To better understand how kinematic variables impact learning in surgical training, we devised an interactive environment for simulated laparoscopic maneuvers, using either 1) mechanical constraints typical of a surgical “box-trainer” or 2) virtual constraints in which free hand movements control virtual tool motion. During training, the virtual tool responded to the absolute position in space (Position-Based) or the orientation (Orientation-Based) of a hand-held sensor. Volunteers were further assigned to different sequences of target distances (Near-Far-Near or Far-Near-Far). Training with the Orientation-Based constraint enabled much lower path error and shorter movement times during training, which suggests that tool motion that simply mirrors joint motion is easier to learn. When evaluated in physically constrained (physical box-trainer) conditions, each group exhibited improved performance from training. However, Position-Based training enabled greater reductions in movement error relative to Orientation-Based (mean difference: 14.0 percent; CI: 0.7, 28.6). Furthermore, the Near-Far-Near schedule allowed a greater decrease in task time relative to the Far-Near-Far sequence (mean −13:5 percent, CI: −19:5, −7:5). Training that focused on shallow tool insertion (near targets) might promote more efficient movement strategies by emphasizing the curvature of tool motion. In addition, our findings suggest that an understanding of absolute tool position is critical to coping with mechanical interactions between the tool and trocar. PMID:23293709

Contactless and pose invariant biometric identification using hand surface.

PubMed

Kanhangad, Vivek; Kumar, Ajay; Zhang, David

2011-05-01

This paper presents a novel approach for hand matching that achieves significantly improved performance even in the presence of large hand pose variations. The proposed method utilizes a 3-D digitizer to simultaneously acquire intensity and range images of the user's hand presented to the system in an arbitrary pose. The approach involves determination of the orientation of the hand in 3-D space followed by pose normalization of the acquired 3-D and 2-D hand images. Multimodal (2-D as well as 3-D) palmprint and hand geometry features, which are simultaneously extracted from the user's pose normalized textured 3-D hand, are used for matching. Individual matching scores are then combined using a new dynamic fusion strategy. Our experimental results on the database of 114 subjects with significant pose variations yielded encouraging results. Consistent (across various hand features considered) performance improvement achieved with the pose correction demonstrates the usefulness of the proposed approach for hand based biometric systems with unconstrained and contact-free imaging. The experimental results also suggest that the dynamic fusion approach employed in this work helps to achieve performance improvement of 60% (in terms of EER) over the case when matching scores are combined using the weighted sum rule.

Selection of medical students according to their moral orientation.

PubMed

Bore, Miles; Munro, Don; Kerridge, Ian; Powis, David

2005-03-01

Consideration has been given to the use of tests of moral reasoning in the selection procedure for medical students. We argue that moral orientation, rather than moral reasoning, might be more efficacious in minimising the likelihood of inappropriate ethical behaviour in medicine. A conceptualisation and measure of moral orientation are presented, together with findings from 11 samples of medical school applicants and students. To provide empirical evidence for the reliability and validity of a measure of moral orientation and to explore gender, age, cultural and educational influences on moral orientation. A questionnaire designed to measure a libertarian-dual-communitarian dimension of moral orientation was completed by 7864 medical school applicants and students in Australia, Israel, Fiji, New Zealand, Scotland and England and by 84 Australian psychology students between 1997 and 2001. Older respondents produced marginally higher (more communitarian) moral orientation scores, as did women compared to men. Minor but significant (P <0.05) cultural differences were found. The Israeli samples produced higher mean moral orientation scores, while the Australian psychology student sample produced a lower (more libertarian) mean score relative to all other samples. No significant change in moral orientation score was observed after 1 year in a sample of Australian medical school students (n=59), although some differences observed between 5 cohorts of Australian medical students (Years 1-5; n=234) did reach significance. Moral orientation scores were found to be significantly correlated with a number of personality measures, providing evidence of construct validity. In all samples moral orientation significantly predicted the moral decisions made in response to the hypothetical dilemmas embedded in the measurement instrument. Discussion The results provide support for the conceptualisation of a libertarian-dual-communitarian dimension of moral orientation and demonstrate the psychometric properties of the measurement instrument. A number of questions concerning the use of such tests in selection procedures are considered.

Robust Hand Motion Tracking through Data Fusion of 5DT Data Glove and Nimble VR Kinect Camera Measurements

PubMed Central

Arkenbout, Ewout A.; de Winter, Joost C. F.; Breedveld, Paul

2015-01-01

Vision based interfaces for human computer interaction have gained increasing attention over the past decade. This study presents a data fusion approach of the Nimble VR vision based system, using the Kinect camera, with the contact based 5DT Data Glove. Data fusion was achieved through a Kalman filter. The Nimble VR and filter output were compared using measurements performed on (1) a wooden hand model placed in various static postures and orientations; and (2) three differently sized human hands during active finger flexions. Precision and accuracy of joint angle estimates as a function of hand posture and orientation were determined. Moreover, in light of possible self-occlusions of the fingers in the Kinect camera images, data completeness was assessed. Results showed that the integration of the Data Glove through the Kalman filter provided for the proximal interphalangeal (PIP) joints of the fingers a substantial improvement of 79% in precision, from 2.2 deg to 0.9 deg. Moreover, a moderate improvement of 31% in accuracy (being the mean angular deviation from the true joint angle) was established, from 24 deg to 17 deg. The metacarpophalangeal (MCP) joint was relatively unaffected by the Kalman filter. Moreover, the Data Glove increased data completeness, thus providing a substantial advantage over the sole use of the Nimble VR system. PMID:26694395

Robust Hand Motion Tracking through Data Fusion of 5DT Data Glove and Nimble VR Kinect Camera Measurements.

PubMed

Arkenbout, Ewout A; de Winter, Joost C F; Breedveld, Paul

2015-12-15

Vision based interfaces for human computer interaction have gained increasing attention over the past decade. This study presents a data fusion approach of the Nimble VR vision based system, using the Kinect camera, with the contact based 5DT Data Glove. Data fusion was achieved through a Kalman filter. The Nimble VR and filter output were compared using measurements performed on (1) a wooden hand model placed in various static postures and orientations; and (2) three differently sized human hands during active finger flexions. Precision and accuracy of joint angle estimates as a function of hand posture and orientation were determined. Moreover, in light of possible self-occlusions of the fingers in the Kinect camera images, data completeness was assessed. Results showed that the integration of the Data Glove through the Kalman filter provided for the proximal interphalangeal (PIP) joints of the fingers a substantial improvement of 79% in precision, from 2.2 deg to 0.9 deg. Moreover, a moderate improvement of 31% in accuracy (being the mean angular deviation from the true joint angle) was established, from 24 deg to 17 deg. The metacarpophalangeal (MCP) joint was relatively unaffected by the Kalman filter. Moreover, the Data Glove increased data completeness, thus providing a substantial advantage over the sole use of the Nimble VR system.

Creative work environments in sport organizations: the influence of sexual orientation diversity and commitment to diversity.

PubMed

Cunningham, George B

2011-01-01

Drawing from creative capital theory, the purpose of this study was to examine the degree to which sexual orientation diversity and commitment to diversity were predictive of workplaces that fostered creativity. Data were collected from 653 senior level athletic administrators and aggregated to the athletic department level of analysis (n = 199). Moderated regression indicated that sexual orientation diversity did not influence the presence of a creative work environment. There was however, a significant sexual orientation diversity × commitment to diversity interaction. When commitment to diversity was high, there was a positive association between sexual orientation diversity and a creative work environment; on the other hand, when commitment to diversity was low, the aforementioned relationship was negative. Results provide support for the notion that all diversity forms can be a source of enrichment and understanding, thereby benefiting the workplace.

Multiple reference frames in haptic spatial processing

NASA Astrophysics Data System (ADS)

Volčič, R.

2008-08-01

The present thesis focused on haptic spatial processing. In particular, our interest was directed to the perception of spatial relations with the main focus on the perception of orientation. To this end, we studied haptic perception in different tasks, either in isolation or in combination with vision. The parallelity task, where participants have to match the orientations of two spatially separated bars, was used in its two-dimensional and three-dimensional versions in Chapter 2 and Chapter 3, respectively. The influence of non-informative vision and visual interference on performance in the parallelity task was studied in Chapter 4. A different task, the mental rotation task, was introduced in a purely haptic study in Chapter 5 and in a visuo-haptic cross-modal study in Chapter 6. The interaction of multiple reference frames and their influence on haptic spatial processing were the common denominators of these studies. In this thesis we approached the problems of which reference frames play the major role in haptic spatial processing and how the relative roles of distinct reference frames change depending on the available information and the constraints imposed by different tasks. We found that the influence of a reference frame centered on the hand was the major cause of the deviations from veridicality observed in both the two-dimensional and three-dimensional studies. The results were described by a weighted average model, in which the hand-centered egocentric reference frame is supposed to have a biasing influence on the allocentric reference frame. Performance in haptic spatial processing has been shown to depend also on sources of information or processing that are not strictly connected to the task at hand. When non-informative vision was provided, a beneficial effect was observed in the haptic performance. This improvement was interpreted as a shift from the egocentric to the allocentric reference frame. Moreover, interfering visual information presented in the vicinity of the haptic stimuli parametrically modulated the magnitude of the deviations. The influence of the hand-centered reference frame was shown also in the haptic mental rotation task where participants were quicker in judging the parity of objects when these were aligned with respect to the hands than when they were physically aligned. Similarly, in the visuo-haptic cross-modal mental rotation task the parity judgments were influenced by the orientation of the exploring hand with respect to the viewing direction. This effect was shown to be modulated also by an intervening temporal delay that supposedly counteracts the influence of the hand-centered reference frame. We suggest that the hand-centered reference frame is embedded in a hierarchical structure of reference frames where some of these emerge depending on the demands and the circumstances of the surrounding environment and the needs of an active perceiver.

Recent advancements in prosthetic hand technology.

PubMed

Saikia, Angana; Mazumdar, Sushmi; Sahai, Nitin; Paul, Sudip; Bhatia, Dinesh; Verma, Suresh; Rohilla, Punit Kumar

2016-07-01

Recently, significant advances over the past decade have been made in robotics, artificial intelligence and other cognitive related fields, allowing development of highly sophisticated bio-mimetic robotics systems. In addition, enormous number of robots have been designed and assembled by explicitly realising their biological oriented behaviours. To enhance skill behaviours and adequate grasping abilities in these devices, a new phase of dexterous hands has been developed recently with bio-mimetically oriented and bio-inspired functionalities. The aim in writing this review paper is to present a detailed insight towards the development of the bio-mimetic based dexterous robotic multi-fingered artificial hand. An "ideal" upper limb prosthesis should be perceived as a part of their natural body by the amputee and should replicate sensory-motor capabilities of the amputated limb. Upper-limb amputations are most often the result of sudden trauma to the body, although they also can be caused by malignancy, congenital deficiencies and vascular diseases. This paper discusses the different bio-mimetic approaches using a framework that permits for a common description of biological and technical based hand manipulation behaviour. In particular, the review focuses on a number of developments in the inspired robotic systems. In conclusion, the study found that a huge amount of research efforts in terms of kinematics, dynamics, modelling and control methodologies are being put in to improve the present hand technology, thereby providing more functionality to the prosthetic limb of the amputee. This would improve their quality-of-life and help in performing activities of daily living (ADL) tasks with comparative ease in the near future.

An interview technique for recording work postures in epidemiological studies. Music-Norrtälje Study Group.

PubMed

Wiktorin, C; Selin, K; Ekenvall, L; Alfredsson, L

1996-02-01

The aim of the study was to present and evaluate a work-task-oriented interview technique focusing on the placement of the hands relative to the body and assessing per cent time spent in five standard work postures during a working day. The reproducibility of estimated time spent in each work posture was tested by the test-retest method in 32 subjects; 16 were interviewed by the same interviewer and 16 were interviewed by another one at the retest. The validity concerning estimated time spent in th five standard work postures was tested in relation to observations in 58 male blue-collar workers. The mean registration (assessment) time was 6 hours and 15 minutes. No evident differences in the reproducibility depending on same or different interviewers at test and retest could be observed. The linear relationship between times estimated by the interview and by observations was high for four of the work postures: 'sitting' (r = 0.86), 'standing with hands above shoulder level' (r = 0.87), 'between shoulder and knuckle level' (r = 0.75), and 'below knuckle level' (r = 0.93). When the work posture 'standing with hands between shoulder and knuckle level' was divided into 'hands fixed' (r = 0.62) and 'hands not fixed' (r = 0.50) the correlations were weak. Current musculoskeletal complaints did not influence the accuracy of the estimations. The present task-oriented interview technique may be the best available method to estimate these work postures in a way that requires few resources compared to observations and technical measurements.

Air, hand wipe, and surface wipe sampling for Bisphenol A (BPA) among workers in industries that manufacture and use BPA in the United States.

PubMed

Hines, Cynthia J; Jackson, Matthew V; Christianson, Annette L; Clark, John C; Arnold, James E; Pretty, Jack R; Deddens, James A

2017-11-01

For decades, bisphenol A (BPA) has been used in making polycarbonate, epoxy, and phenolic resins and certain investment casting waxes, yet published exposure data are lacking for U.S. manufacturing workers. In 2013-2014, BPA air and hand exposures were quantified for 78 workers at six U.S. companies making BPA or BPA-based products. Exposure measures included an inhalable-fraction personal air sample on each of two consecutive work days (n = 146), pre- and end-shift hand wipe samples on the second day (n = 74 each), and surface wipe samples (n = 88). Potential determinants of BPA air and end-shift hand exposures (after natural log transformation) were assessed in univariate and multiple regression mixed models. The geometric mean (GM) BPA air concentration was 4.0 µg/m 3 (maximum 920 µg/m 3 ). The end-shift GM BPA hand level (26 µg/sample) was 10-times higher than the pre-shift level (2.6 µg/sample). BPA air and hand exposures differed significantly by industry and job. BPA air concentrations and end-shift hand levels were highest in the BPA-filled wax manufacturing/reclaim industry (GM Air = 48 µg/m 3 , GM Hand-End = 130 µg/sample) and in the job of working with molten BPA-filled wax (GM Air = 43 µg/m 3 , GM Hand-End = 180 µg/sample), and lowest in the phenolic resins industry (GM Air = 0.85 µg/m 3 , GM Hand-End = 0.43 µg/sample) and in the job of flaking phenolic resins (GM AIR = 0.62 µg/m 3 , GM Hand-End = 0.38 µg/sample). Determinants of increased BPA air concentration were industry, handling BPA containers, spilling BPA, and spending ≥50% of the shift in production areas; increasing age was associated with lower air concentrations. BPA hand exposure determinants were influenced by high values for two workers; for all other workers, tasks involving contact with BPA-containing materials and spending ≥50% of the shift in production areas were associated with increased BPA hand levels. Surface wipe BPA levels were significantly lower in eating/office areas (GM = 9.3 µg/100 cm 2 ) than in production areas (GM = 140 µg/100 cm 2 ). In conclusion, worker BPA exposure was associated with tasks and conditions affecting both inhalation and dermal exposure. The potential for BPA-related health effects among these workers is unknown.

Ego-rotation and object-rotation in major depressive disorder.

PubMed

Chen, Jiu; Yang, Laiqi; Ma, Wentao; Wu, Xingqu; Zhang, Yan; Wei, Dunhong; Liu, Guangxiong; Deng, Zihe; Hua, Zhen; Jia, Ting

2013-08-30

Mental rotation (MR) performance provides a direct insight into a prototypical higher-level visuo-spatial cognitive operation. Previous studies suggest that progressive slowing with an increasing angle of orientation indicates a specific wing of object-based mental transformations in the psychomotor retardation that occurs in major depressive disorder (MDD). It is still not known, however, whether the ability of object-rotation is associated with the ability of ego-rotation in MDD. The present study was designed to investigate the level of impairment of mental transformation abilities in MDD. For this purpose we tested 33 MDD (aged 18-52 years, 16 women) and 30 healthy control subjects (15 women, age and education matched) by evaluating the performance of MDD subjects with regard to ego-rotation and object-rotation tasks. First, MDD subjects were significantly slower and made more errors than controls in mentally rotating hands and letters. Second, MDD and control subjects displayed the same pattern of response times to stimuli at various orientations in the letter task but not the hand task. Third, in particular, MDD subjects were significantly slower and made more errors during the mental transformation of hands than letters relative to control subjects and were significantly slower and made more errors in physiologically impossible angles than physiologically possible angles in the mental rotation hand task. In conclusion, MDD subjects present with more serious mental rotation deficits specific to the hand than the letter task. Importantly, deficits were more present during the mental transformation in outward rotation angles, thus suggesting that the mental imagery for hands and letters relies on different processing mechanisms which suggest a module that is more complex for the processing of human hands than for letters during mental rotation tasks. Our study emphasises the necessity of distinguishing different levels of impairment of action in MDD subjects. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

Super-resolved Mirau digital holography by structured illumination

NASA Astrophysics Data System (ADS)

Ganjkhani, Yasaman; Charsooghi, Mohammad A.; Akhlaghi, Ehsan A.; Moradi, Ali-Reza

2017-12-01

In this paper, we apply structured illumination toward super-resolved 3D imaging in a common-path digital holography arrangement. Digital holographic microscopy (DHM) provides non-invasive 3D images of transparent samples as well as 3D profiles of reflective surfaces. A compact and vibration-immune arrangement for DHM may be obtained through the use of a Mirau microscope objective. However, high-magnification Mirau objectives have a low working distance and are expensive. Low-magnification ones, on the other hand, suffer from low lateral resolution. Structured illumination has been widely used for resolution improvement of intensity images, but the technique can also be readily applied to DHM. We apply structured illumination to Mirau DHM by implementing successive sinusoidal gratings with different orientations onto a spatial light modulator (SLM) and forming its image on the specimen. Moreover, we show that, instead of different orientations of 1D gratings, alternative single 2D gratings, e.g. checkerboard or hexagonal patterns, can provide resolution enhancement in multiple directions. Our results show a 35% improvement in the resolution power of the DHM. The presented arrangement has the potential to serve as a table-top device for high resolution holographic microscopy.

User-oriented evaluation of mechanical single-channel axial pipettes.

PubMed

Sormunen, Erja; Nevala, Nina

2013-09-01

Hand tools should be designed so that they are comfortable to use, fit the hand and are user-oriented. Six different manual, single-channel axial pipettes were evaluated for such objective outcomes as muscular activity, wrist postures and efficiency, as well as for subjective outcomes concerning self-assessed features of pipette usability and musculoskeletal strain. Ten experienced laboratory employees volunteered for the study. The results showed that light and short pipettes with better tool comfort resulted in reduced muscular activity and perceived musculoskeletal strain when they were compared with a long and heavy pipette. There were no differences in the efficiency between the different pipettes. Combining both the objective and subjective measures enabled a broader evaluation of product usability. The results of this study can be used both in product development and as information on which to base the purchase of new pipettes for laboratory work. Copyright © 2012 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Impact of Oriented Clay Particles on X-Ray Spectroscopy Analysis

NASA Astrophysics Data System (ADS)

Lim, A. J. M. S.; Syazwani, R. N.; Wijeyesekera, D. C.

2016-07-01

Understanding the engineering properties of the mineralogy and microfabic of clayey soils is very complex and thus very difficult for soil characterization. Micromechanics of soils recognize that the micro structure and mineralogy of clay have a significant influence on its engineering behaviour. To achieve a more reliable quantitative evaluation of clay mineralogy, a proper sample preparation technique for quantitative clay mineral analysis is necessary. This paper presents the quantitative evaluation of elemental analysis and chemical characterization of oriented and random oriented clay particles using X-ray spectroscopy. Three different types of clays namely marine clay, bentonite and kaolin clay were studied. The oriented samples were prepared by placing the dispersed clay in water and left to settle on porous ceramic tiles by applying a relatively weak suction through a vacuum pump. Images form a Scanning Electron Microscope (SEM) was also used to show the comparison between the orientation patterns of both the sample preparation techniques. From the quantitative analysis of the X-ray spectroscopy, oriented sampling method showed more accuracy in identifying mineral deposits, because it produced better peak intensity on the spectrum and more mineral content can be identified compared to randomly oriented samples.

Comparison of Standard Culture-Based Method to Culture-Independent Method for Evaluation of Hygiene Effects on the Hand Microbiome

PubMed Central

Leff, J.; Henley, J.; Tittl, J.; De Nardo, E.; Butler, M.; Griggs, R.; Fierer, N.

2017-01-01

ABSTRACT Hands play a critical role in the transmission of microbiota on one’s own body, between individuals, and on environmental surfaces. Effectively measuring the composition of the hand microbiome is important to hand hygiene science, which has implications for human health. Hand hygiene products are evaluated using standard culture-based methods, but standard test methods for culture-independent microbiome characterization are lacking. We sampled the hands of 50 participants using swab-based and glove-based methods prior to and following four hand hygiene treatments (using a nonantimicrobial hand wash, alcohol-based hand sanitizer [ABHS], a 70% ethanol solution, or tap water). We compared results among culture plate counts, 16S rRNA gene sequencing of DNA extracted directly from hands, and sequencing of DNA extracted from culture plates. Glove-based sampling yielded higher numbers of unique operational taxonomic units (OTUs) but had less diversity in bacterial community composition than swab-based sampling. We detected treatment-induced changes in diversity only by using swab-based samples (P < 0.001); we were unable to detect changes with glove-based samples. Bacterial cell counts significantly decreased with use of the ABHS (P < 0.05) and ethanol control (P < 0.05). Skin hydration at baseline correlated with bacterial abundances, bacterial community composition, pH, and redness across subjects. The importance of the method choice was substantial. These findings are important to ensure improvement of hand hygiene industry methods and for future hand microbiome studies. On the basis of our results and previously published studies, we propose recommendations for best practices in hand microbiome research. PMID:28351915

Demixing by a Nematic Mean Field: Coarse-Grained Simulations of Liquid Crystalline Polymers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ramírez-Hernández, Abelardo; Hur, Su-Mi; Armas-Pérez, Julio

2017-03-01

Liquid crystalline polymers exhibit a particular richness of behaviors that stems from their rigidity and their macromolecular nature. On the one hand, the orientational interaction between liquid-crystalline motifs promotes their alignment, thereby leading to the emergence of nematic phases. On the other hand, the large number of configurations associated with polymer chains favors formation of isotropic phases, with chain stiffness becoming the factor that tips the balance. In this work, a soft coarse-grained model is introduced to explore the interplay of chain stiffness, molecular weight and orientational coupling, and their role on the isotropic-nematic transition in homopolymer melts. We alsomore » study the structure of polymer mixtures composed of stiff and flexible polymeric molecules. We consider the effects of blend composition, persistence length, molecular weight and orientational coupling strength on the melt structure at the nano-and mesoscopic levels. Conditions are found where the systems separate into two phases, one isotropic and the other nematic. We confirm the existence of non-equilibrium states that exhibit sought-after percolating nematic domains, which are of interest for applications in organic photovoltaic and electronic devices.« less

Object-oriented approach to the automatic segmentation of bones from pediatric hand radiographs

NASA Astrophysics Data System (ADS)

Shim, Hyeonjoon; Liu, Brent J.; Taira, Ricky K.; Hall, Theodore R.

1997-04-01

The purpose of this paper is to develop a robust and accurate method that automatically segments phalangeal and epiphyseal bones from digital pediatric hand radiographs exhibiting various stages of growth. The development of this system draws principles from object-oriented design, model- guided analysis, and feedback control. A system architecture called 'the object segmentation machine' was implemented incorporating these design philosophies. The system is aided by a knowledge base where all model contours and other information such as age, race, and sex, are stored. These models include object structure models, shape models, 1-D wrist profiles, and gray level histogram models. Shape analysis is performed first by using an arc-length orientation transform to break down a given contour into elementary segments and curves. Then an interpretation tree is used as an inference engine to map known model contour segments to data contour segments obtained from the transform. Spatial and anatomical relationships among contour segments work as constraints from shape model. These constraints aid in generating a list of candidate matches. The candidate match with the highest confidence is chosen to be the current intermediate result. Verification of intermediate results are perform by a feedback control loop.

"We Dance and Find Each Other"1: Effects of Dance/Movement Therapy on Negative Symptoms in Autism Spectrum Disorder.

PubMed

Hildebrandt, Malin K; Koch, Sabine C; Fuchs, Thomas

2016-11-10

The treatment of deficits in social interaction, a shared symptom cluster in persons with schizophrenia (negative symptoms) and autism spectrum disorder (DSM-5 A-criterion), has so far remained widely unsuccessful in common approaches of psychotherapy. The alternative approach of embodiment brings to focus body-oriented intervention methods based on a theoretic framework that explains the disorders on a more basic level than common theory of mind approaches. The randomized controlled trial at hand investigated the effects of a 10-week manualized dance and movement therapy intervention on negative symptoms in participants with autism spectrum disorder. Although the observed effects failed to reach significance at the conventional 0.05 threshold, possibly due to an undersized sample, an encouraging trend towards stronger symptom reduction in the treatment group for overall negative symptoms and for almost all subtypes was found at the 0.10-level. Effect sizes were small but clinically meaningful, and the resulting patterns were in accordance with theoretical expectations. The study at hand contributes to finding an effective treatment approach for autism spectrum disorder in accordance with the notion of embodiment .

“We Dance and Find Each Other”1: Effects of Dance/Movement Therapy on Negative Symptoms in Autism Spectrum Disorder

PubMed Central

Hildebrandt, Malin K.; Koch, Sabine C.; Fuchs, Thomas

2016-01-01

The treatment of deficits in social interaction, a shared symptom cluster in persons with schizophrenia (negative symptoms) and autism spectrum disorder (DSM-5 A-criterion), has so far remained widely unsuccessful in common approaches of psychotherapy. The alternative approach of embodiment brings to focus body-oriented intervention methods based on a theoretic framework that explains the disorders on a more basic level than common theory of mind approaches. The randomized controlled trial at hand investigated the effects of a 10-week manualized dance and movement therapy intervention on negative symptoms in participants with autism spectrum disorder. Although the observed effects failed to reach significance at the conventional 0.05 threshold, possibly due to an undersized sample, an encouraging trend towards stronger symptom reduction in the treatment group for overall negative symptoms and for almost all subtypes was found at the 0.10-level. Effect sizes were small but clinically meaningful, and the resulting patterns were in accordance with theoretical expectations. The study at hand contributes to finding an effective treatment approach for autism spectrum disorder in accordance with the notion of embodiment. PMID:27834905

Influence of sampling window size and orientation on parafoveal cone packing density

PubMed Central

Lombardo, Marco; Serrao, Sebastiano; Ducoli, Pietro; Lombardo, Giuseppe

2013-01-01

We assessed the agreement between sampling windows of different size and orientation on packing density estimates in images of the parafoveal cone mosaic acquired using a flood-illumination adaptive optics retinal camera. Horizontal and vertical oriented sampling windows of different size (320x160 µm, 160x80 µm and 80x40 µm) were selected in two retinal locations along the horizontal meridian in one eye of ten subjects. At each location, cone density tended to decline with decreasing sampling area. Although the differences in cone density estimates were not statistically significant, Bland-Altman plots showed that the agreement between cone density estimated within the different sampling window conditions was moderate. The percentage of the preferred packing arrangements of cones by Voronoi tiles was slightly affected by window size and orientation. The results illustrated the high importance of specifying the size and orientation of the sampling window used to derive cone metric estimates to facilitate comparison of different studies. PMID:24009995

Directional fractal signature methods for trabecular bone texture in hand radiographs: Data from the Osteoarthritis Initiative

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wolski, M., E-mail: marcin.wolski@curtin.edu.au; Podsiadlo, P.; Stachowiak, G. W.

Purpose: To develop directional fractal signature methods for the analysis of trabecular bone (TB) texture in hand radiographs. Problems associated with the small size of hand bones and the orientation of fingers were addressed. Methods: An augmented variance orientation transform (AVOT) and a quadrant rotating grid (QRG) methods were developed. The methods calculate fractal signatures (FSs) in different directions. Unlike other methods they have the search region adjusted according to the size of bone region of interest (ROI) to be analyzed and they produce FSs defined with respect to any chosen reference direction, i.e., they work for arbitrary orientation ofmore » fingers. Five parameters at scales ranging from 2 to 14 pixels (depending on image size and method) were derived from rose plots of Hurst coefficients, i.e., FS in dominating roughness (FS{sub Sta}), vertical (FS{sub V}) and horizontal (FS{sub H}) directions, aspect ratio (StrS), and direction signatures (StdS), respectively. The accuracy in measuring surface roughness and isotropy/anisotropy was evaluated using 3600 isotropic and 800 anisotropic fractal surface images of sizes between 20 × 20 and 64 × 64 pixels. The isotropic surfaces had FDs ranging from 2.1 to 2.9 in steps of 0.1, and the anisotropic surfaces had two dominating directions of 30° and 120°. The methods were used to find differences in hand TB textures between 20 matched pairs of subjects with (cases: approximate Kellgren-Lawrence (KL) grade ≥2) and without (controls: approximate KL grade <2) radiographic hand osteoarthritis (OA). The OA Initiative public database was used and 20 × 20 pixel bone ROIs were selected on 5th distal and middle phalanges. The performance of the AVOT and QRG methods was compared against a variance orientation transform (VOT) method developed earlier [M. Wolski, P. Podsiadlo, and G. W. Stachowiak, “Directional fractal signature analysis of trabecular bone: evaluation of different methods to detect early osteoarthritis in knee radiographs,” Proc. Inst. Mech. Eng., Part H 223, 211–236 (2009)]. Results: The AVOT method correctly quantified the isotropic and anisotropic surfaces for all image sizes and scales. Values of FS{sub Sta} were significantly different (P < 0.05) between the isotropic surfaces. Using the VOT and QRG methods no differences were found at large scales for the isotropic surfaces that are smaller than 64 × 64 and 48 × 48 pixels, respectively, and at some scales for the anisotropic surfaces with size 48 × 48 pixels. Compared to controls, using the AVOT and QRG methods the authors found that OA TB textures were less rough (P < 0.05) in the dominating and horizontal directions (i.e., lower FS{sub Sta} and FS{sub H}), rougher in the vertical direction (i.e., higher FS{sub V}) and less anisotropic (i.e., higher StrS) than controls. No differences were found using the VOT method. Conclusions: The AVOT method is well suited for the analysis of bone texture in hand radiographs and it could be potentially useful for early detection and prediction of hand OA.« less

Behavioral evidence for left-hemisphere specialization of motor planning

PubMed Central

Meulenbroek, Ruud G. J.; Steenbergen, Bert

2010-01-01

Recent studies suggest that the left hemisphere is dominant for the planning of motor actions. This left-hemisphere specialization hypothesis was proposed in various lines of research, including patient studies, motor imagery studies, and studies involving neurophysiological techniques. However, most of these studies are primarily based on experiments involving right-hand-dominant participants. Here, we present the results of a behavioral study with left-hand-dominant participants, which follows up previous work in right-hand-dominant participants. In our experiment, participants grasped CD casings and replaced them in a different, pre-cued orientation. Task performance was measured by the end-state comfort effect, i.e., the anticipated degree of physical comfort associated with the posture that is planned to be adopted at movement completion. Both left- and right-handed participants showed stronger end-state comfort effects for their right hand compared to their left hand. These results lend behavioral support to the left-hemisphere-dominance motion-planning hypothesis. PMID:21184219

The 3-D vision system integrated dexterous hand

NASA Technical Reports Server (NTRS)

Luo, Ren C.; Han, Youn-Sik

1989-01-01

Most multifingered hands use a tendon mechanism to minimize the size and weight of the hand. Such tendon mechanisms suffer from the problems of striction and friction of the tendons resulting in a reduction of control accuracy. A design for a 3-D vision system integrated dexterous hand with motor control is described which overcomes these problems. The proposed hand is composed of three three-jointed grasping fingers with tactile sensors on their tips, a two-jointed eye finger with a cross-shaped laser beam emitting diode in its distal part. The two non-grasping fingers allow 3-D vision capability and can rotate around the hand to see and measure the sides of grasped objects and the task environment. An algorithm that determines the range and local orientation of the contact surface using a cross-shaped laser beam is introduced along with some potential applications. An efficient method for finger force calculation is presented which uses the measured contact surface normals of an object.

Online maternity information seeking among lesbian, bisexual, and queer women.

PubMed

Ruppel, Emily H; Karpman, Hannah E; Delk, Carolyn E; Merryman, Mallory

2017-05-01

recent research has concluded that barriers to maternity health care exist for lesbian, bisexual, and queer women. This mixed methods study aims to understand patterns in seeking and sharing online health information for LBQ women attempting conception. researchers performed a qualitative content analysis of 400 discussions in lesbian-oriented Facebook groups, containing 1764 total instances of text. 400 discussions from heterosexual-oriented conception and parenting Facebook groups were examined for comparison purposes, though they will not be the focus of this analysis. This paper also presents descriptive statistics on posts observed. posts were drawn from a representative sample of lesbian-oriented conception, pregnancy, and parenting Facebook groups. Posts examined for comparison purposes were drawn from groups that appeared to primarily serve heterosexual women. many participants in lesbian-oriented Facebook groups sought and provided medical information. Their queries focused on the insemination process, and frequently related to posters' specific situations, while heterosexual women tended to seek general advice about the conception and pregnancy process. The accuracy of the content of responses varied, and group members seemed to view the prevalence of contradictory information as positive evidence of diverse perspectives. Even when information was technically correct, posters did not always apply it properly to the question at hand. barriers to maternity care, or a lack of education and initiative among primary care providers, may drive lesbian, bisexual, and queer women to seek health information from peers on the Internet when trying to become pregnant. These exchanges may contribute to misinformation, which may negatively affect lesbian, bisexual, and queer women's fertility outcomes and overall health. clinicians should be conscious of online health information seeking as both a symptom of and cause of sexuality-based disparities. Copyright © 2017 Elsevier Ltd. All rights reserved.

Location-coding account versus affordance-activation account in handle-to-hand correspondence effects: Evidence of Simon-like effects based on the coding of action direction.

PubMed

Pellicano, Antonello; Koch, Iring; Binkofski, Ferdinand

2017-09-01

An increasing number of studies have shown a close link between perception and action, which is supposed to be responsible for the automatic activation of actions compatible with objects' properties, such as the orientation of their graspable parts. It has been observed that left and right hand responses to objects (e.g., cups) are faster and more accurate if the handle orientation corresponds to the response location than when it does not. Two alternative explanations have been proposed for this handle-to-hand correspondence effect : location coding and affordance activation. The aim of the present study was to provide disambiguating evidence on the origin of this effect by employing object sets for which the visually salient portion was separated from, and opposite to the graspable 1, and vice versa. Seven experiments were conducted employing both single objects and object pairs as visual stimuli to enhance the contextual information about objects' graspability and usability. Notwithstanding these manipulations intended to favor affordance activation, results fully supported the location-coding account displaying significant Simon-like effects that involved the orientation of the visually salient portion of the object stimulus and the location of the response. Crucially, we provided evidence of Simon-like effects based on higher-level cognitive, iconic representations of action directions rather than based on lower-level spatial coding of the pure position of protruding portions of the visual stimuli. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

The syntactic organization of pasta-eating and the structure of reach movements in the head-fixed mouse.

PubMed

Whishaw, Ian Q; Faraji, Jamshid; Kuntz, Jessica R; Mirza Agha, Behroo; Metz, Gerlinde A S; Mohajerani, Majid H

2017-09-08

Mice are adept in the use of their hands for activities such as feeding, which has led to their use in investigations of the neural basis of skilled-movements. We describe the syntactic organization of pasta-eating and the structure of hand movements used for pasta manipulation by the head-fixed mouse. An ethogram of mice consuming pieces of spaghetti reveals that they eat in bite/chew bouts. A bout begins with pasta lifted to the mouth and then manipulated with hand movements into a preferred orientation for biting. Manipulation involves many hand release-reach movements, each with a similar structure. A hand is advanced from a digit closed and flexed (collect) position to a digit extended and open position (overgrasp) and then to a digit closed and flexed (grasp) position. Reach distance, hand shaping, and grasp patterns featuring precision grasps or whole hand grasps are related. To bite, mice display hand preference and asymmetric grasps; one hand (guide grasp) directs food into the mouth and the other stabilizes the pasta for biting. When chewing after biting, the hands hold the pasta in a symmetric resting position. Pasta-eating is organized and features structured hand movements and so lends itself to the neural investigation of skilled-movements.

59. The right hand portion of the Wah Chong Tai ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

59. The right hand portion of the Wah Chong Tai Co. was built by a Chinese immigrant in the late 1890s as a noodle factory and store for Chinese imported goods. The left portion was constructed in 1909 and a noodle parlor was opened on the upper story. This building has a distinctive oriental design around the windows. Both buildings are substantially intact, and retain basement level storefronts. - Butte Historic District, Bounded by Copper, Arizona, Mercury & Continental Streets, Butte, Silver Bow County, MT

Orientation of liquid crystalline blue phases on unidirectionally orienting surfaces

NASA Astrophysics Data System (ADS)

Takahashi, Misaki; Ohkawa, Takuma; Yoshida, Hiroyuki; Fukuda, Jun-ichi; Kikuchi, Hirostugu; Ozaki, Masanori

2018-03-01

Liquid crystalline cholesteric blue phases (BPs) continue to attract interest due to their fast response times and quasi-polarization-independent phase modulation capabilities. Various approaches have recently been proposed to control the crystal orientation of BPs on substrates; however, their basic orientation properties on standard, unidirectionally orienting alignment layers have not been investigated in detail. Through analysis of the azimuthal orientation of Kossel diagrams, we study the 3D crystal orientation of a BP material—with a phase sequence of cholesteric, BP I, and BP II—on unidirectionally orienting surfaces prepared using two methods: rubbing and photoalignment. BP II grown from the isotropic phase is sensitive to surface conditions, with different crystal planes orienting on the two substrates. On the other hand, strong thermal hysteresis is observed in BPs grown through a different liquid crystal phase, implying that the preceding structure determines the orientation. More specifically, the BP II-I transition is accompanied by a rotation of the crystal such that the crystal direction defined by certain low-value Miller indices transform into different directions, and within the allowed rotations, different azimuthal configurations are obtained in the same cell depending on the thermal process. Our findings demonstrate that, for the alignment control of BPs, the thermal process is as important as the properties of the alignment layer.

Quantitative evaluation of the piezoelectric response of unpoled ferroelectric ceramics from elastic and dielectric measurements: Tetragonal BaTiO3

NASA Astrophysics Data System (ADS)

Cordero, F.

2018-03-01

A method is proposed for evaluating the potential piezoelectric response, that a ferroelectric material would exhibit after full poling, from elastic and dielectric measurements of the unpoled ceramic material. The method is based on the observation that the softening in a ferroelectric phase with respect to the paraelectric phase is of piezoelectric origin, and is tested on BaTiO3. The angular averages of the piezoelectric softening in unpoled ceramics are calculated for ferroelectric phases of different symmetries. The expression of the orientational average with the piezoelectric and dielectric constants of single crystal tetragonal BaTiO3 from the literature reproduces well the softening of the Young's modulus of unpoled ceramic BaTiO3, after a correction for the porosity. The agreement is good in the temperature region sufficiently far from the Curie temperature and from the transition to the orthorhombic phase, where the effect of fluctuations should be negligible, but deviations are found outside this region, and possible reasons for this are discussed. This validates the determination of the piezoelectric response by means of purely elastic measurements on unpoled samples. The method is indirect and, for quantitative assessments, requires the knowledge of the dielectric tensor. On the other hand, it does not require poling of the sample, and therefore is insensitive to inaccuracies from incomplete poling, and can even be used with materials that cannot be poled, for example, due to excessive electrical conductivity. While the proposed example of the Young's modulus of a ceramic provides an orientational average of all the single crystal piezoelectric constants, a Resonant Ultrasound Spectroscopy measurement of a single unpoled ceramic sample through the ferroelectric transition can in principle measure all the piezoelectric constants, together with the elastic ones.

Mobile Phone Use Behaviors and Postures on Public Transportation Systems

PubMed Central

Liang, Huey-Wen; Hwang, Yaw-Huei

2016-01-01

Mobile phones are common in our daily life, but the users’ preferences for postures or screen operating styles have not been studied. This was a cross-sectional and observational study. We randomly sampled passengers who used mobile phones on the Mass Rapid Transit (MRT) system in metropolitan Taipei. A checklist was used to observe their body postures and screen operating styles while sitting or standing. As a result, 1,230 subjects from 400 trips were observed. Overall, of all the passengers who were sitting, 41% of them were using mobile phones. The majority of the tasks involved browsing (84%) with their phones in a portrait orientation (93%). Different-hand holding/operating was the most commonly used operating style while sitting (46%) and same-hand holding/operating was the most common while standing (46%). The distribution of screen operating styles was significantly different for those sitting than for those standing and for different genders and age groups. The most frequently observed postures while sitting were having one’s trunk against a backrest, feet on the floor and with or without an arm supported (58%). As for the users who were standing, the both- and different-hands groups had a high proportion of arms unsupported, feet on the floor and either their trunk supported or not. In contrast, the same-hand group tended to have their trunk unsupported, were holding a pole or handstrap and had both feet on floor. Further studies are warranted to characterize the ergonomic exposure of these commonly used postures and operating styles, and our results will help guide the selection of experimental conditions for laboratory settings. PMID:26828797

Sexual-orientation differences in drinking patterns and use of drinking contexts among college students.

PubMed

Coulter, Robert W S; Marzell, Miesha; Saltz, Robert; Stall, Ron; Mair, Christina

2016-03-01

Evidence suggests there are important sexual-orientation differences in alcohol consumption, particularly among women. Little is known about where gay/lesbian and bisexual college students drink or differences in drinking patterns derived from graduated frequency measures between heterosexual, gay/lesbian, and bisexual students. The goal of this analysis was to examine patterns of alcohol consumption-including drinking prevalence, quantity, frequency, and contexts of use-by sexual orientation. Data on sexual identity, gender, drinking behaviors, and drinking contexts were examined from repeated cross-sectional samples of undergraduate students attending 14 public California universities from 2003-2011 (n=58,903). Multivariable statistical techniques were employed to examine sexual-orientation differences stratified by gender. Gay males, lesbians, and bisexual females were significantly more likely to report drinking alcohol in the current semester than their same-gender heterosexual peers (relative risks ranged from 1.07 to 1.10, p-values <0.01). Among current drinkers, bisexual females consumed 7 or more drinks and lesbians consumed 10 or more drinks on significantly more days than heterosexual females. On the other hand, gay male drinkers consumed 8 or more drinks on significantly fewer days than heterosexual male drinkers. Compared to their same-gender heterosexual peers: lesbian/gay and bisexual students drank less frequently at Greek parties (incidence rate ratios [IRRs] ranged from 0.52 to 0.73, p-values <0.01); lesbians (IRR=0.84, p=0.043) and bisexual males (IRR=0.82, p=0.009) drank less frequently at off-campus parties; and gay males drank more frequently outdoors (IRR=1.63, p<0.001) and at bars/restaurants (IRR=1.21, p=0.013). Alcohol prevention programs and future research should consider sexual-orientation differences in drinking patterns and use of drinking contexts. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Play It, Learn It, Make It Last: Developing an Online Game to Create Self-Sufficient Library Information Users.

PubMed

Boyce, Lindsay M

2016-01-01

Library orientation at an academic health sciences library consisted of a five-minute overview within new student orientation. Past experience indicated this brief presentation was insufficient for students to learn about library resources. In 2014, an effort was made to supplement orientation by developing an online game aimed at enabling students to become self-sufficient through hands-on learning. A gaming model was chosen with expectations that competition and rewards would motivate students. Although the pilots suffered from low participation rates, the experience merits further research into the potential of a broader model of online library instruction in the health sciences environment.

[A case with apraxia of tool use: selective inability to form a hand posture for a tool].

PubMed

Hayakawa, Yuko; Fujii, Toshikatsu; Yamadori, Atsushi; Meguro, Kenichi; Suzuki, Kyoko

2015-03-01

Impaired tool use is recognized as a symptom of ideational apraxia. While many studies have focused on difficulties in producing gestures as a whole, using tools involves several steps; these include forming hand postures appropriate for the use of certain tool, selecting objects or body parts to act on, and producing gestures. In previously reported cases, both producing and recognizing hand postures were impaired. Here we report the first case showing a selective impairment of forming hand postures appropriate for tools with preserved recognition of the required hand postures. A 24-year-old, right-handed man was admitted to hospital because of sensory impairment of the right side of the body, mild aphasia, and impaired tool use due to left parietal subcortical hemorrhage. His ability to make symbolic gestures, copy finger postures, and orient his hand to pass a slit was well preserved. Semantic knowledge for tools and hand postures was also intact. He could flawlessly select the correct hand postures in recognition tasks. He only demonstrated difficulties in forming a hand posture appropriate for a tool. Once he properly grasped a tool by trial and error, he could use it without hesitation. These observations suggest that each step of tool use should be thoroughly examined in patients with ideational apraxia.

The effect of bracing availability on one-hand isometric force exertion capability.

PubMed

Jones, Monica L H; Reed, Matthew P; Chaffin, Don B

2013-01-01

Environmental obstructions that workers encounter can kinematically limit the postures that they can achieve. However, such obstructions can also provide an opportunity for additional support by bracing with the hand, thigh or other body part. The reaction forces on bracing surfaces, which are in addition to those acting at the feet and task hand, are hypothesised to improve force exertion capability, and become required inputs to biomechanical analysis of tasks with bracing. The effects of kinematic constraints and associated bracing opportunities on isometric hand force were quantified in a laboratory study of 22 men and women. Analyses of one-hand maximal push, pull and lift tasks demonstrated that bracing surfaces available at the thighs and non-task hand enabled participants to exert an average of 43% more force at the task hand. Task hand force direction deviated significantly from the nominal direction for exertions performed with bracing at both medium and low task hand locations. This study quantifies the effect of bracing on kinematically constrained force exertions. Knowledge that appropriate bracing surfaces can substantially increase hand force is critical to the evaluation of task-oriented strength capability. Force estimates may also involve large off-axis components, which have clear implications for ergonomic analyses of manual tasks.

[Introduction and analysis on acupuncture education and qualification examination system in U.S.A].

PubMed

Lu, Cong; He, Wei; Zhao, Ying-Kai

2013-12-01

Based on research of the Accreditation Commission for Acupuncture and Oriental Medicine (ACAOM), the National Certification Commission for Acupuncture and Oriental Medicine (NCCAOM) and the related public websites of acupuncture educational institutions, the first hand information was studied, summarized and sorted on the status quo of the educational qualification or the relative authentication of education programs of ACAOM as well as the status of professional qualification and examination of NCCAOM. The education curriculum of the Master degree of Acupuncture, Master degree of Oriental Medicine Science as well as the Doctor degree of Acupuncture and Oriental Medicine were also introduced in this article including student enrollment and graduation in recent years. The developing tendency of the federal unified acupuncture education, management, professional qualification and examination system of U. S. A. were discussed and analyzed as well.

Three new species of Grouvellinus Champion, 1923 from Maliau Basin, Sabah, Borneo, discovered by citizen scientists during the first Taxon Expedition (Insecta, Coleoptera, Elmidae)

PubMed Central

Freitag, Hendrik; Pangantihon, Clister V.; Njunjić, Iva

2018-01-01

Abstract Further results are presented of the first field course at Maliau Basin, Malaysian Borneo organized by Taxon Expeditions, an organization which enables citizen scientists to be directly involved in taxonomic discoveries. Three new species of the aquatic beetle genus Grouvellinus Champion, 1923, namely G. leonardodicaprioi sp. n., G. andrekuipersi sp. n., and G. quest sp. n. were collected jointly by the citizen scientists and taxonomists during the fieldwork in Maliau Basin. Material was mainly sampled from sandstone bottom rocks of blackwater streams at altitudes between 900 m and 1,000 m using fine-meshed hand-nets. The genus is widely distributed in the Oriental and Palearctic regions, but these are the first records from the island of Borneo. PMID:29740222

Deficiency in Mental Rotation of Upper and Lower-Limbs in Patients With Multiple Sclerosis and Its Relation With Cognitive Functions.

PubMed

Azin, Mahdieh; Zangiabadi, Nasser; Moghadas Tabrizi, Yousef; Iranmanesh, Farhad; Baneshi, Mohammad Reza

2016-08-01

Mental rotation is a cognitive motor process which was impaired in different neurologic disorders. We investigated whether there were deficits in response pattern, reaction time and response accuracy rate of mental rotation in multiple sclerosis (MS) patients compared to healthy subjects and whether cognitive dysfunctions in MS patients were correlated with mental rotation deficits. Moreover, we showed whether there was a difference between upper and lower-limbs mental rotation in MS patients. Thirty-five MS patients and 25 healthy subjects performed hand mental rotation (HMR) and foot mental rotation (FMR) tasks. Visual information processing speed, spatial learning and memory ability, and visuospatial processing were assessed by Symbol Digit Modalities Test (SDMT), Brief Visuospatial Memory Test-Revised (BVMT-R), and Judgment of Line Orientation Test (JLO) respectively in MS patients. Reaction time for both hand and foot stimuli increased, and response accuracy rate for hand stimuli decreased in MS patients compared to healthy subjects, but response pattern of mental rotation in MS patients persisted. Similar to healthy subjects, MS patients performed upper-limbs mental rotation more easily than a lower-limbs mental rotation with more speed and response accuracy rate. Reaction time and response accuracy rate were correlated with the mentioned cognitive functions. MS patients made use of the correct response pattern for problem solving of increasing orientation from upright stimuli. Reaction time and response accuracy rate altered in these patients and this alteration might occur along with impairment in motor planning. Subjects' better responding to hand stimuli was due to more familiarity with hand stimuli. The correlation of mental rotation ability with cognitive functions indicates the possible role of cognitive functions in mental rotation.

Bacterial contamination of the hands of food handlers as indicator of hand washing efficacy in some convenient food industries in South Africa.

PubMed

Aa, Lambrechts; Is, Human; Jh, Doughari; Jfr, Lues

2014-07-01

Hands of ready-to-eat food service employees have been shown to be vectors in the spread of foodborne disease, mainly because of poor personal hygiene and accounting for approximately 97% of food borne illnesses in food service establishments and homes. Our objective was to evaluate the efficacy of hand washing practices and sanitation before commencing work among food handlers in the convenient food industry in Gauteng, South Africa. A total of 230 samples were collected, involving 100% of the food handlers, in 8 selected convenient food outlets with their main focus on preparing ready-to-eat foods. The workers' cleaned and disinfected dominant hands were sampled for Total Plate Count (TPC), Staphylococcus aureus and Escherichia coli. Bacteria were isolated and counted using standard methods. The highest bacterial count from the hand samples was 7.4 x 10(3) cfu.cm(-2) and the lowest showed no detectable growth. Although hands with a count of 0 cfu.cm(-2) were found in all of the plants, the results indicated that all the plants exceeded the legal limit for food surfaces or hands of < 100 cfu.cm(-2) when the average bacterial counts on hands were compared. Sixty percent of the TPC analysed exceeded the legal limit and only 18% of the food handlers had no bacteria detectable on their hands. One sample tested positive for E. coli and S. aureus could not be detected on the hands of any of the food handlers. The study revealed that hand hygiene is unsatisfactory and may have serious implications for public health due to contamination of food from food handlers' hands. This therefore underlined the importance of further training to improve food handlers' knowledge of good hand washing practices.

Hand-Based Biometric Analysis

NASA Technical Reports Server (NTRS)

Bebis, George (Inventor); Amayeh, Gholamreza (Inventor)

2015-01-01

Hand-based biometric analysis systems and techniques are described which provide robust hand-based identification and verification. An image of a hand is obtained, which is then segmented into a palm region and separate finger regions. Acquisition of the image is performed without requiring particular orientation or placement restrictions. Segmentation is performed without the use of reference points on the images. Each segment is analyzed by calculating a set of Zernike moment descriptors for the segment. The feature parameters thus obtained are then fused and compared to stored sets of descriptors in enrollment templates to arrive at an identity decision. By using Zernike moments, and through additional manipulation, the biometric analysis is invariant to rotation, scale, or translation or an in put image. Additionally, the analysis utilizes re-use of commonly-seen terms in Zernike calculations to achieve additional efficiencies over traditional Zernike moment calculation.

Hand-Based Biometric Analysis

NASA Technical Reports Server (NTRS)

Bebis, George

2013-01-01

Hand-based biometric analysis systems and techniques provide robust hand-based identification and verification. An image of a hand is obtained, which is then segmented into a palm region and separate finger regions. Acquisition of the image is performed without requiring particular orientation or placement restrictions. Segmentation is performed without the use of reference points on the images. Each segment is analyzed by calculating a set of Zernike moment descriptors for the segment. The feature parameters thus obtained are then fused and compared to stored sets of descriptors in enrollment templates to arrive at an identity decision. By using Zernike moments, and through additional manipulation, the biometric analysis is invariant to rotation, scale, or translation or an input image. Additionally, the analysis uses re-use of commonly seen terms in Zernike calculations to achieve additional efficiencies over traditional Zernike moment calculation.

Body Context and Posture Affect Mental Imagery of Hands

PubMed Central

Ionta, Silvio; Perruchoud, David; Draganski, Bogdan; Blanke, Olaf

2012-01-01

Different visual stimuli have been shown to recruit different mental imagery strategies. However the role of specific visual stimuli properties related to body context and posture in mental imagery is still under debate. Aiming to dissociate the behavioural correlates of mental processing of visual stimuli characterized by different body context, in the present study we investigated whether the mental rotation of stimuli showing either hands as attached to a body (hands-on-body) or not (hands-only), would be based on different mechanisms. We further examined the effects of postural changes on the mental rotation of both stimuli. Thirty healthy volunteers verbally judged the laterality of rotated hands-only and hands-on-body stimuli presented from the dorsum- or the palm-view, while positioning their hands on their knees (front postural condition) or behind their back (back postural condition). Mental rotation of hands-only, but not of hands-on-body, was modulated by the stimulus view and orientation. Additionally, only the hands-only stimuli were mentally rotated at different speeds according to the postural conditions. This indicates that different stimulus-related mechanisms are recruited in mental rotation by changing the bodily context in which a particular body part is presented. The present data suggest that, with respect to hands-only, mental rotation of hands-on-body is less dependent on biomechanical constraints and proprioceptive input. We interpret our results as evidence for preferential processing of visual- rather than kinesthetic-based mechanisms during mental transformation of hands-on-body and hands-only, respectively. PMID:22479618

Program Evaluation: Two Management-Oriented Samples

ERIC Educational Resources Information Center

Alford, Kenneth Ray

2010-01-01

Two Management-Oriented Samples details two examples of the management-oriented approach to program evaluation. Kenneth Alford, a doctorate candidate at the University of the Cumberlands, details two separate program evaluations conducted in his school district and seeks to compare and contrast the two evaluations based upon the characteristics of…

A Model of Parental Achievement-Oriented Psychological Control in Academically Gifted Students

ERIC Educational Resources Information Center

Garn, Alex C.; Jolly, Jennifer L.

2015-01-01

This study investigated achievement-oriented parent socialization as it pertains to school avoidance in a sample of gifted students. A serial mediation model examining relationships among parental achievement-oriented psychological control (APC), fear of academic failure, academic amotivation, and school avoidance was tested. The sample included…

Impact of body posture on laterality judgement and explicit recognition tasks performed on self and others' hands.

PubMed

Conson, Massimiliano; Errico, Domenico; Mazzarella, Elisabetta; De Bellis, Francesco; Grossi, Dario; Trojano, Luigi

2015-04-01

Judgments on laterality of hand stimuli are faster and more accurate when dealing with one's own than others' hand, i.e. the self-advantage. This advantage seems to be related to activation of a sensorimotor mechanism while implicitly processing one's own hands, but not during explicit one's own hand recognition. Here, we specifically tested the influence of proprioceptive information on the self-hand advantage by manipulating participants' body posture during self and others' hand processing. In Experiment 1, right-handed healthy participants judged laterality of either self or others' hands, whereas in Experiment 2, an explicit recognition of one's own hands was required. In both experiments, the participants performed the task while holding their left or right arm flexed with their hand in direct contact with their chest ("flexed self-touch posture") or with their hand placed on a wooden smooth surface in correspondence with their chest ("flexed proprioceptive-only posture"). In an "extended control posture", both arms were extended and in contact with thighs. In Experiment 1 (hand laterality judgment), we confirmed the self-advantage and demonstrated that it was enhanced when the subjects judged left-hand stimuli at 270° orientation while keeping their left arm in the flexed proprioceptive-only posture. In Experiment 2 (explicit self-hand recognition), instead, we found an advantage for others' hand ("self-disadvantage") independently from posture manipulation. Thus, position-related proprioceptive information from left non-dominant arm can enhance sensorimotor one's own body representation selectively favouring implicit self-hands processing.

Variation in the cranial base orientation and facial skeleton in dry skulls sampled from three major populations.

PubMed

Kuroe, Kazuto; Rosas, Antonio; Molleson, Theya

2004-04-01

The aim of this study was to analyse the effects of cranial base orientation on the morphology of the craniofacial system in human populations. Three geographically distant populations from Europe (72), Africa (48) and Asia (24) were chosen. Five angular and two linear variables from the cranial base component and six angular and six linear variables from the facial component based on two reference lines of the vertical posterior maxillary and Frankfort horizontal planes were measured. The European sample presented dolichofacial individuals with a larger face height and a smaller face depth derived from a raised cranial base and facial cranium orientation which tended to be similar to the Asian sample. The African sample presented brachyfacial individuals with a reduced face height and a larger face depth as a result of a lowered cranial base and facial cranium orientation. The Asian sample presented dolichofacial individuals with a larger face height and depth due to a raised cranial base and facial cranium orientation. The findings of this study suggest that cranial base orientation and posterior cranial base length appear to be valid discriminating factors between different human populations.

The melt-recrystallization behavior of highly oriented α-iPP fibers embedded in a HIPS matrix.

PubMed

Ye, Liwei; Li, Huihui; Qiu, Zhaobin; Yan, Shouke

2015-03-21

The melt-recrystallization behavior of α-iPP fibers embedded in an amorphous HIPS matrix has been studied by means of optical microscopy. The amorphous HIPS serving as a supporter of iPP fibers does not become involved in the nucleation and crystallization process of the molten highly oriented iPP fibers. It also does not provide any birefringence under the optical microscope with crossed polarizers. This enables the study of orientation-induced β-iPP crystallization through a control of the melting status of the fibers. Through melting the fibers at different temperatures above 175 °C and subsequent recrystallization, some β-iPP crystals were always produced. The content of the β-iPP crystal depends strongly on the melting temperature and melting time of the iPP fibers. It was confirmed that melting the iPP fibers at relatively lower temperature, e.g. 176 °C, less amount of β-iPP crystals were observed. The content of β-iPP crystal enhances first with increasing melting temperature and then decreases with further increase of the fiber melting temperature. The β-iPP crystallization is found to be most favorable upon melting the fibers at 178 °C for 2 min. This demonstrates the requirement of a certain chain or chain segment orientation for generating β-iPP crystallization on the one hand, while higher orientation of the iPP chains or chain segments encourages the growth of iPP crystals in the α-form on the other hand. This has been further confirmed by varying the melting time of the fiber at different temperatures, since relaxation of the iPP molecular chains at a fixed temperature is time dependent. Moreover, the complete transformation of α-iPP fibers in some local places into β-iPP crystals implies that the αβ-transition may not be required for the orientation-induced β-iPP crystallization.

Comparison of Standard Culture-Based Method to Culture-Independent Method for Evaluation of Hygiene Effects on the Hand Microbiome.

PubMed

Zapka, C; Leff, J; Henley, J; Tittl, J; De Nardo, E; Butler, M; Griggs, R; Fierer, N; Edmonds-Wilson, S

2017-03-28

Hands play a critical role in the transmission of microbiota on one's own body, between individuals, and on environmental surfaces. Effectively measuring the composition of the hand microbiome is important to hand hygiene science, which has implications for human health. Hand hygiene products are evaluated using standard culture-based methods, but standard test methods for culture-independent microbiome characterization are lacking. We sampled the hands of 50 participants using swab-based and glove-based methods prior to and following four hand hygiene treatments (using a nonantimicrobial hand wash, alcohol-based hand sanitizer [ABHS], a 70% ethanol solution, or tap water). We compared results among culture plate counts, 16S rRNA gene sequencing of DNA extracted directly from hands, and sequencing of DNA extracted from culture plates. Glove-based sampling yielded higher numbers of unique operational taxonomic units (OTUs) but had less diversity in bacterial community composition than swab-based sampling. We detected treatment-induced changes in diversity only by using swab-based samples ( P < 0.001); we were unable to detect changes with glove-based samples. Bacterial cell counts significantly decreased with use of the ABHS ( P < 0.05) and ethanol control ( P < 0.05). Skin hydration at baseline correlated with bacterial abundances, bacterial community composition, pH, and redness across subjects. The importance of the method choice was substantial. These findings are important to ensure improvement of hand hygiene industry methods and for future hand microbiome studies. On the basis of our results and previously published studies, we propose recommendations for best practices in hand microbiome research. IMPORTANCE The hand microbiome is a critical area of research for diverse fields, such as public health and forensics. The suitability of culture-independent methods for assessing effects of hygiene products on microbiota has not been demonstrated. This is the first controlled laboratory clinical hand study to have compared traditional hand hygiene test methods with newer culture-independent characterization methods typically used by skin microbiologists. This study resulted in recommendations for hand hygiene product testing, development of methods, and future hand skin microbiome research. It also demonstrated the importance of inclusion of skin physiological metadata in skin microbiome research, which is atypical for skin microbiome studies. Copyright © 2017 Zapka et al.

Teaching Consumer-Oriented Ethnographic Research

ERIC Educational Resources Information Center

Wong, Andrew D.; Wu, Lan

2012-01-01

Despite an increasing demand for marketing researchers familiar with ethnographic methods, ethnographic consumer research has received little coverage in current marketing curricula. The innovation discussed in the present paper addresses this problem: it introduces the notion of "cultural relativism" and gives students hands-on experience in…

New hand bones of Hadropithecus stenognathus: implications for the paleobiology of the Archaeolemuridae.

PubMed

Lemelin, Pierre; Hamrick, Mark W; Richmond, Brian G; Godfrey, Laurie R; Jungers, William L; Burney, David A

2008-03-01

A partial, associated skeleton of Hadropithecus stenognathus (AHA-I) was discovered in 2003 at Andrahomana Cave in southeastern Madagascar. Among the postcranial elements found were the first hand bones (right scaphoid, right hamate, left first metacarpal, and right and left fifth metacarpals) attributed to this rare subfossil lemur. These hand bones were compared to those of extant strepsirrhines and catarrhines in order to infer the positional adaptations of Hadropithecus, and they were compared to those of Archaeolemur in order to assess variation in hand morphology among archaeolemurids. The scaphoid tubercle does not project palmarly as in suspensory and climbing taxa, and the hamate has no hook at all (just a small tubercle), which also points to a poorly developed carpal tunnel. There is a distinctive, radioulnarly directed "spiral" facet for articulation with the triquetrum that is most similar in orientation to that of more terrestrial primates (i.e., Lemur catta, Papio, and Gorilla). The first metacarpal is very reduced and represents only 48% of the length of metacarpal V, as in Archaeolemur, which suggests that pollical grasping of arboreal supports was not important. Compared to Archaeolemur, the shaft of metacarpal V is gracile, and the head has no dorsal ridge and lacks characteristics functionally associated with digitigrade, extended metacarpophalangeal joint postures. Proximally, the articular facet for the hamate is oriented more dorsally. Thus, the carpometacarpal joint V appears to have a distinctive hyperextended set, which has no analog among living or extinct primates. The carpals of Hadropithecus are diagnostic of a pronograde, arboreal and terrestrial (although not digitigrade) locomotor repertoire that typifies Lemur catta and some Old World monkeys. No clinging, suspensory, or climbing specializations that characterize indriids or lorises can be found in the hand of this subfossil lemur. The hand of Hadropithecus likely had similar ranges of movement at the radiocarpal and midcarpal joints as of those of pronograde primates, such as lemurids, for which the hand is held in a more extended, pronated, and neutral (i.e., showing less ulnar deviation) position during locomotion in comparison to that of vertical clingers or slow climbers. Although highly autapomorphic, the hand of Hadropithecus resembles that of its sister taxon, Archaeolemur, in having a very reduced pollex and an articular facet on the scaphoid for a sizeable prepollex. These unusual hand features reinforce the monophyly of the Archaeolemuridae.

Homography-based visual servo regulation of mobile robots.

PubMed

Fang, Yongchun; Dixon, Warren E; Dawson, Darren M; Chawda, Prakash

2005-10-01

A monocular camera-based vision system attached to a mobile robot (i.e., the camera-in-hand configuration) is considered in this paper. By comparing corresponding target points of an object from two different camera images, geometric relationships are exploited to derive a transformation that relates the actual position and orientation of the mobile robot to a reference position and orientation. This transformation is used to synthesize a rotation and translation error system from the current position and orientation to the fixed reference position and orientation. Lyapunov-based techniques are used to construct an adaptive estimate to compensate for a constant, unmeasurable depth parameter, and to prove asymptotic regulation of the mobile robot. The contribution of this paper is that Lyapunov techniques are exploited to craft an adaptive controller that enables mobile robot position and orientation regulation despite the lack of an object model and the lack of depth information. Experimental results are provided to illustrate the performance of the controller.

Motor planning and execution in left- and right-handed individuals during a bimanual grasping and placing task.

PubMed

Hughes, Charmayne M L; Reissig, Paola; Seegelke, Christian

2011-09-01

The issue of handedness has been the topic of great interest for researchers in a number of scientific domains. It is typically observed that the dominant hand yields numerous behavioral advantages over the non-dominant hand during unimanual tasks, which provides evidence of hemispheric specialization. In contrast to advantages for the dominant hand during motor execution, recent research has demonstrated that the right hand has advantages during motor planning (regardless of handedness), indicating that motor planning is a specialized function of the left hemisphere. In the present study we explored hemispheric advantages in motor planning and execution in left- and right-handed individuals during a bimanual grasping and placing task. Replicating previous findings, both motor planning and execution was influenced by object end-orientation congruency. In addition, although motor planning (i.e., end-state comfort) was not influenced by hand or handedness, motor execution differed between left and right hand, with shorter object transport times observed for the left hand, regardless of handedness. These results demonstrate that the hemispheric advantages often observed in unimanual tasks do not extend to discrete bimanual tasks. We propose that the differences in object transport time between the two hands arise from overt shifting visual fixation between the two hands/objects. Copyright © 2011 Elsevier B.V. All rights reserved.

Haptically facilitated bimanual training combined with augmented visual feedback in moderate to severe hemiplegia.

PubMed

Boos, Amy; Qiu, Qinyin; Fluet, Gerard G; Adamovich, Sergei V

2011-01-01

This study describes the design and feasibility testing of a hand rehabilitation system that provides haptic assistance for hand opening in moderate to severe hemiplegia while subjects attempt to perform bilateral hand movements. A cable-actuated exoskeleton robot assists the subjects in performing impaired finger movements but is controlled by movement of the unimpaired hand. In an attempt to combine the neurophysiological stimuli of bilateral movement and action observation during training, visual feedback of the impaired hand is replaced by feedback of the unimpaired hand, either by using a sagittaly oriented mirror or a virtual reality setup with a pair of virtual hands presented on a flat screen controlled with movement of the unimpaired hand, providing a visual image of their paretic hand moving normally. Joint angles for both hands are measured using data gloves. The system is programmed to maintain a symmetrical relationship between the two hands as they respond to commands to open and close simultaneously. Three persons with moderate to severe hemiplegia secondary to stroke trained with the system for eight, 30 to 60 minute sessions without adverse events. Each demonstrated positive motor adaptations to training. The system was well tolerated by persons with moderate to severe upper extremity hemiplegia. Further testing of its effects on motor ability with a broader range of clinical presentations is indicated.

Rubber Hand Illusion Affects Joint Angle Perception

PubMed Central

Butz, Martin V.; Kutter, Esther F.; Lorenz, Corinna

2014-01-01

The Rubber Hand Illusion (RHI) is a well-established experimental paradigm. It has been shown that the RHI can affect hand location estimates, arm and hand motion towards goals, the subjective visual appearance of the own hand, and the feeling of body ownership. Several studies also indicate that the peri-hand space is partially remapped around the rubber hand. Nonetheless, the question remains if and to what extent the RHI can affect the perception of other body parts. In this study we ask if the RHI can alter the perception of the elbow joint. Participants had to adjust an angular representation on a screen according to their proprioceptive perception of their own elbow joint angle. The results show that the RHI does indeed alter the elbow joint estimation, increasing the agreement with the position and orientation of the artificial hand. Thus, the results show that the brain does not only adjust the perception of the hand in body-relative space, but it also modifies the perception of other body parts. In conclusion, we propose that the brain continuously strives to maintain a consistent internal body image and that this image can be influenced by the available sensory information sources, which are mediated and mapped onto each other by means of a postural, kinematic body model. PMID:24671172

Mental rotation of primate hands: human-likeness and thumb saliency.

PubMed

Bläsing, Bettina; de Castro Campos, Marcella; Schack, Thomas; Brugger, Peter

2012-08-01

Mental rotation of human hands has been found to differ essentially from mental rotation of objects in such a way that reaction times and error rates of handedness judgements are influenced by the comfort and familiarity of the presented hand postures. To investigate the role of the similarity of the presented hands to the participant's own hand, we used different primates' hands as stimuli in a mental rotation task. Five out of 24 primate hands were chosen for their ratings in human-likeness and saliency of the thumb according to a questionnaire study and presented in two mental rotation experiments; in the second experiment, they were modified in such a way that all hands appeared thumbless. Results of both experiments revealed effects of species and orientation on reaction times, and an interaction between species and hand side occurred in the second experiment. In the first experiment, the thumbless Colobus hand differed from all other hands, showing the highest reaction times and error rates and failing to show the expected medial-over-lateral advantage. In the second experiment, the eccentricity of the Colobus hand was decreased and the facilitating effect of human-likeness was slightly increased. We conclude that motor strategies were applied that relied less on the asymmetry of the stimuli but rather on their similarity to the human hand. We argue that motor simulation might facilitate the processing of incomplete stimuli by mentally completing them, especially if all stimuli can be processed in a consistent manner.

Tracing kinematic (mis)alignments in CALIFA merging galaxies. Stellar and ionized gas kinematic orientations at every merger stage

NASA Astrophysics Data System (ADS)

Barrera-Ballesteros, J. K.; García-Lorenzo, B.; Falcón-Barroso, J.; van de Ven, G.; Lyubenova, M.; Wild, V.; Méndez-Abreu, J.; Sánchez, S. F.; Marquez, I.; Masegosa, J.; Monreal-Ibero, A.; Ziegler, B.; del Olmo, A.; Verdes-Montenegro, L.; García-Benito, R.; Husemann, B.; Mast, D.; Kehrig, C.; Iglesias-Paramo, J.; Marino, R. A.; Aguerri, J. A. L.; Walcher, C. J.; Vílchez, J. M.; Bomans, D. J.; Cortijo-Ferrero, C.; González Delgado, R. M.; Bland-Hawthorn, J.; McIntosh, D. H.; Bekeraitė, S.

2015-10-01

We present spatially resolved stellar and/or ionized gas kinematic properties for a sample of 103 interacting galaxies, tracing all merger stages: close companions, pairs with morphological signatures of interaction, and coalesced merger remnants. In order to distinguish kinematic properties caused by a merger event from those driven by internal processes, we compare our galaxies with a control sample of 80 non-interacting galaxies. We measure for both the stellar and the ionized gas components the major (projected) kinematic position angles (PAkin, approaching and receding) directly from the velocity distributions with no assumptions on the internal motions. This method also allow us to derive the deviations of the kinematic PAs from a straight line (δPAkin). We find that around half of the interacting objects show morpho-kinematic PA misalignments that cannot be found in the control sample. In particular, we observe those misalignments in galaxies with morphological signatures of interaction. On the other hand, thelevel of alignment between the approaching and receding sides for both samples is similar, with most of the galaxies displaying small misalignments. Radial deviations of the kinematic PA orientation from a straight line in the stellar component measured by δPAkin are large for both samples. However, for a large fraction of interacting galaxies the ionized gas δPAkin is larger than the typical values derived from isolated galaxies (48%), indicating that this parameter is a good indicator to trace the impact of interaction and mergers in the internal motions of galaxies. By comparing the stellar and ionized gas kinematic PA, we find that 42% (28/66) of the interacting galaxies have misalignments larger than 16°, compared to 10% from the control sample. Our results show the impact of interactions in the motion of stellar and ionized gas as well as the wide the variety of their spatially resolved kinematic distributions. This study also provides a local Universe benchmark for kinematic studies in merging galaxies at high redshift. Appendices are available in electronic form at http://www.aanda.org

Spatial asymmetry in tactile sensor skin deformation aids perception of edge orientation during haptic exploration.

PubMed

Ponce Wong, Ruben D; Hellman, Randall B; Santos, Veronica J

2014-01-01

Upper-limb amputees rely primarily on visual feedback when using their prostheses to interact with others or objects in their environment. A constant reliance upon visual feedback can be mentally exhausting and does not suffice for many activities when line-of-sight is unavailable. Upper-limb amputees could greatly benefit from the ability to perceive edges, one of the most salient features of 3D shape, through touch alone. We present an approach for estimating edge orientation with respect to an artificial fingertip through haptic exploration using a multimodal tactile sensor on a robot hand. Key parameters from the tactile signals for each of four exploratory procedures were used as inputs to a support vector regression model. Edge orientation angles ranging from -90 to 90 degrees were estimated with an 85-input model having an R (2) of 0.99 and RMS error of 5.08 degrees. Electrode impedance signals provided the most useful inputs by encoding spatially asymmetric skin deformation across the entire fingertip. Interestingly, sensor regions that were not in direct contact with the stimulus provided particularly useful information. Methods described here could pave the way for semi-autonomous capabilities in prosthetic or robotic hands during haptic exploration, especially when visual feedback is unavailable.

Validating the Orientations to Happiness Scale in a Chinese Sample of University Students

ERIC Educational Resources Information Center

Chen, Guo-Hai

2010-01-01

This paper examined the reliability and validity of the Orientation to Happiness Scale with a sample of Chinese correspondents. Chinese translation of the Orientation to Happiness Scale, Satisfaction with Life Scale, Temporal Satisfaction with Life Scale, and General Life Satisfaction Scale, were administered to 671 Chinese university students…

The Effect of Layer Orientation on the Mechanical Properties and Microstructure of a Polymer

NASA Astrophysics Data System (ADS)

Vega, V.; Clements, J.; Lam, T.; Abad, A.; Fritz, B.; Ula, N.; Es-Said, O. S.

2011-08-01

Rapid Prototyping (RP) is a method used everywhere from the entertainment industry to healthcare. Layer orientation is an important aspect of the final product. The objective of this research was to evaluate the effect of layer orientation on the mechanical strength and toughness of a polymer. The polymer used was a combination of two materials, ZP 130 and ZB 58, fused together in the Z Corporation Spectrum Z510 Rapid Prototyping Machine. ZP 130 is a powder composed of vinyl polymer (2-20%), sulfate salt (0-5%), and plaster that contains <1% crystalline silica (50-95%). ZB 58 is a liquid composed of glycerol (1-10%), preservative (sorbic acid salt) (0-2%), surfactant (<1%), pigment (<1%), and water (85-95%). After removal from the machine the samples were sealed with Z bond 101 which is Beta-methoxyethyl cyanoacrylate (60-100%). The layer orientations studied were the crack arrestor, crack divider, and short transverse with various combinations of the three, for a total of seven orientations. The mechanical strength was evaluated using tensile testing and three-point bend testing. The toughness was evaluated by Izod impact testing. Five samples for tensile testing and three-point bend testing as well as 15 samples for the Izod impact test for each of the seven orientations were made. The total number of samples was 175. The crack arrestor orientation was the strongest main orientation for the tensile and three-point bend test. Weibull analysis was done on the Izod impact testing due to high variation in the results for the crack arrestor and short transverse directions. It was found that the layer orientation and surface roughness played a significant role in the penetration of the Z bond 101 coating and in the overall strength of the samples.

Technology-assisted training of arm-hand skills in stroke: concepts on reacquisition of motor control and therapist guidelines for rehabilitation technology design

PubMed Central

Timmermans, Annick AA; Seelen, Henk AM; Willmann, Richard D; Kingma, Herman

2009-01-01

Background It is the purpose of this article to identify and review criteria that rehabilitation technology should meet in order to offer arm-hand training to stroke patients, based on recent principles of motor learning. Methods A literature search was conducted in PubMed, MEDLINE, CINAHL, and EMBASE (1997–2007). Results One hundred and eighty seven scientific papers/book references were identified as being relevant. Rehabilitation approaches for upper limb training after stroke show to have shifted in the last decade from being analytical towards being focussed on environmentally contextual skill training (task-oriented training). Training programmes for enhancing motor skills use patient and goal-tailored exercise schedules and individual feedback on exercise performance. Therapist criteria for upper limb rehabilitation technology are suggested which are used to evaluate the strengths and weaknesses of a number of current technological systems. Conclusion This review shows that technology for supporting upper limb training after stroke needs to align with the evolution in rehabilitation training approaches of the last decade. A major challenge for related technological developments is to provide engaging patient-tailored task oriented arm-hand training in natural environments with patient-tailored feedback to support (re) learning of motor skills. PMID:19154570

Reliability and factorial structure of the taoist-orientation scale for samples of Kuwaiti and American students.

PubMed

Lester, David; Abdel-Khalek, Ahmed

2002-08-01

In a sample of 460 Kuwaiti undergraduates and 273 American students, the Taoist-Orientation scale had different factor patterns in an item-analysis but had good internal consistency reliability for both samples.

Force reflecting hand controller for manipulator teleoperation

NASA Technical Reports Server (NTRS)

Bryfogle, Mark D.

1991-01-01

A force reflecting hand controller based upon a six degree of freedom fully parallel mechanism, often termed a Stewart Platform, has been designed, constructed, and tested as an integrated system with a slave robot manipulator test bed. A force reflecting hand controller comprises a kinesthetic device capable of transmitting position and orientation commands to a slave robot manipulator while simultaneously representing the environmental interaction forces of the slave manipulator back to the operator through actuators driving the hand controller mechanism. The Stewart Platform was chosen as a novel approach to improve force reflecting teleoperation because of its inherently high ratio of load generation capability to system mass content and the correspondingly high dynamic bandwidth. An additional novelty of the program was to implement closed loop force and torque control about the hand controller mechanism by equipping the handgrip with a six degree of freedom force and torque measuring cell. The mechanical, electrical, computer, and control systems are discussed and system tests are presented.

An effective hand vein feature extraction method.

PubMed

Li, Haigang; Zhang, Qian; Li, Chengdong

2015-01-01

As a new authentication method developed years ago, vein recognition technology features the unique advantage of bioassay. This paper studies the specific procedure for the extraction of hand back vein characteristics. There are different positions used in the collecting process, so that a suitable intravenous regional orientation method is put forward, allowing the positioning area to be the same for all hand positions. In addition, to eliminate the pseudo vein area, the valley regional shape extraction operator can be improved and combined with multiple segmentation algorithms. The images should be segmented step by step, making the vein texture to appear clear and accurate. Lastly, the segmented images should be filtered, eroded, and refined. This process helps to filter the most of the pseudo vein information. Finally, a clear vein skeleton diagram is obtained, demonstrating the effectiveness of the algorithm. This paper presents a hand back vein region location method. This makes it possible to rotate and correct the image by working out the inclination degree of contour at the side of hand back.

Universal approach for appending double-negative materials to magneto-optics in multilayer structures

NASA Astrophysics Data System (ADS)

Zamani, Mehdi; Eftekhari, Sepideh; Ghanaatshoar, Majid

2018-04-01

We express a general formalism to describe light propagation in multilayers including both left-handed and normal magnetic materials. In this order, we employ propagation and boundary matrices which are applicable to any configuration of media, incident angle of light and orientation of magnetization in each ferromagnetic layer. We calculate the Kerr and Faraday rotation in some given magneto-optical multilayers and show that this universal approach can thoroughly illustrate spectral broadening by the left-handed layers, even in presence of dispersion effect.

Anisotropic mechanical behavior of an injection molded short fiber reinforced thermoplastic

NASA Astrophysics Data System (ADS)

Lopez, Delphine; Thuillier, Sandrine; Bessières, Nicolas; Grohens, Yves

2016-10-01

A short fiber reinforced thermoplastic was injected into a rectangular mold, in order to prepare samples to characterize the mechanical behavior of the material. The injection process was simulated with Moldflow and a cutting pattern was deduced from the predicted fiber orientation, leading to samples with several well-defined orientations with respect to the injection direction. Monotonic tensile tests up to rupture, as well as complex cycles made of loading steps followed by relaxation steps at different strain levels were performed, in order to check the reproducibility for a given orientation. Moreover, the fiber orientation in the central part of the tensile samples was also analyzed with X-ray tomography. The results show that the mechanical behavior for each orientation (among 6) was rather reproducible, thus validating the cutting pattern.

An IS Project Management Course Project

ERIC Educational Resources Information Center

Frank, Ronald L.

2010-01-01

Information Systems curricula should provide project management (PM) theory, current practice, and hands-on experience. The schedule usually does not allow time in Analysis and Design courses for development oriented project management instruction other than a short introduction. Similarly, networking courses usually don't put project management…

Task-Oriented Evaluation.

ERIC Educational Resources Information Center

Kanis, Ira B.

1992-01-01

In 1985, participants in the Second International Science Study developed and evaluated hands-on problem-solving activities and gave students the opportunity to demonstrate mastery of science process skills. Six evaluation stations for fifth and sixth graders are presented: Blowing in a Liquid, Compare and Contrast, Electrical Circuit, Hot and…

Controlled bending and folding of a bilayer structure consisting of a thin stiff film and a heat shrinkable polymer sheet

NASA Astrophysics Data System (ADS)

Cui, Jianxun; Adams, John G. M.; Zhu, Yong

2018-05-01

Bending pre-designed flat sheets into three-dimensional (3D) structures is attracting much interest, as it provides a simple approach to make 3D devices. Here we report controlled bending and folding of a bilayer structure consisting of a heat shrinkable polymer sheet and a thin stiff film (not thermally responsive). Upon heating, the prestrained polymer sheet shrinks, leading to bending or folding of the bilayer. We studied the effect of relative dimensions of the two layers on the bending behavior and demonstrated the transition from longitudinal bending to transverse bending of the bilayer strip. Transverse bending was utilized to fold origami structures, including several flat letters, a crane, and a corrugated metal sheet via Miura-ori folding. We developed a method to further control the bending orientation based on bio-inspired anisotropic bending stiffness. By bending the metal foil in different orientations, several structures were obtained, including cylindrical surfaces and left-handed/right-handed helical structures.

Factors determining the spin axis of a pitched fastball in baseball.

PubMed

Jinji, Tsutomu; Sakurai, Shinji; Hirano, Yuichi

2011-04-01

In this study, we wished to investigate the factors that determine the direction of the spin axis of a pitched baseball. Nineteen male baseball pitchers were recruited to pitch fastballs. The pitching motion was recorded with a three-dimensional motion analysis system (1000 Hz), and the orientations of the hand segment in a global coordinate system were calculated using Euler rotation angles. Reflective markers were attached to the ball, and the direction of the spin axis was calculated on the basis of their positional changes. The spin axis directions were significantly correlated with the orientations of the hand just before ball release. The ball is released from the fingertip and rotates on a plane that is formed by the palm and fingers; the spin axis of the ball is parallel to this plane. The lift force of the pitched baseball is largest when the angular and translational velocity vectors are mutually perpendicular. Furthermore, to increase the lift forces for the fastballs, the palm must face home plate.

Socioemotional selectivity theory, aging, and health: the increasingly delicate balance between regulating emotions and making tough choices.

PubMed

Löckenhoff, Corinna E; Carstensen, Laura L

2004-12-01

After providing an introductory overview of socioemotional selectivity theory, we review empirical evidence for its basic postulates and consider the implications of the predicted cognitive and behavioral changes for physical health. The main assertion of socioemotional selectivity theory is that when boundaries on time are perceived, present-oriented goals related to emotional meaning are prioritized over future-oriented goals aimed at acquiring information and expanding horizons. Such motivational changes, which are strongly correlated with chronological age, systematically influence social preferences, social network composition, emotion regulation, and cognitive processing. On the one hand, there is considerable reason to believe that such changes are good for well-being and social adjustment. On the other hand, the very same motivational changes may limit health-related information-seeking and influence attention, memory, and decision-making such that positive material is favored over negative information. Grounding our arguments in socioemotional selectivity theory, we consider possible ways to tailor contexts such that disadvantages are avoided.

Student Understanding of Cross Product Direction and Use of Right-hand Rules: An Exploration of Representation and Context-dependence

NASA Astrophysics Data System (ADS)

Kustusch, Mary Bridget

2011-12-01

Students in introductory physics struggle with vector algebra and with cross product direction in particular. Some have suggested that this may be due to misapplied right-hand rules, but there are few studies that have had the resolution to explore this. Additionally, previous research on student understanding has noted several kinds of representation-dependence of student performance with vector algebra in both physics and non-physics (or math) contexts (e.g. Hawkins et al., 2009; Van Deventer, 2008). Yet with few exceptions (e.g. Scaife and Heckler, 2010), these findings have not been applied to cross product direction questions or the use of right-hand rules. Also, the extensive work in spatial cognition is particularly applicable to cross product direction due to the spatial and kinesthetic nature of the right-hand rule. A synthesis of the literature from these various fields reveals four categories of problem features likely to impact the understanding of cross product direction: (1) the type of reasoning required, (2) the orientation of the vectors, (3) the need for parallel transport, and (4) the physics context and features (or lack thereof). These features formed the basis of the present effort to systematically explore the context-dependence and representation- dependence of student performance on cross product direction questions. This study used a mix of qualitative and quantitative techniques to analyze twenty-seven individual think-aloud interviews. During these interviews, second semester introductory physics students answered 80-100 cross product direction questions in different contexts and with varying problem features. These features were then used as the predictors in regression analyses for correctness and response time. In addition, each problem was coded for the methods used and the errors made to gain a deeper understanding of student behavior and the impact of these features. The results revealed a wide variety of methods (including six different right-hand rules), many different types of errors, and significant context-dependence and representation-dependence for the features mentioned above. Problems that required reasoning backward to find A⃗ (for C⃗=A⃗ xB⃗ ) presented the biggest challenge for students. Participants who recognized the non-commutativity of the cross product would often reverse the order ( B⃗xA⃗ ) on these problems. Also, this error occurred less frequently when a Guess and Check method was used in addition to the right-hand rule. Three different aspects of orientation had a significant impact on performance: (1) the physical discomfort of using a right-hand rule, (2) the plane of the given vectors, and to a lesser extent, (3) the angle between the vectors. One participant was more likely to switch the order of the vectors for the physically awkward orientations than for the physically easy orientations; and there was evidence that some of the difficulty with vector orientations that were not in the xy-plane was due to misinterpretations of the into and out of the page symbols. The impact of both physical discomfort and the plane of the vectors was reduced when participants rotated the paper. Unlike other problem features, the issue of parallel transport did not appear to be nearly as prevalent for cross product direction as it is for vector addition and subtraction. In addition to these findings, this study confirmed earlier findings regarding physics difficulties with magnetic field and magnetic force, such as differences in performance based on the representation of magnetic field (Scaife and Heckler, 2010) and confusion between electric and magnetic fields (Maloney et al., 2001). It also provided evidence of physics difficulties with magnetic field and magnetic force that have been suspected but never explored, specifically the impact of the sign of the charge and the observation location. This study demonstrated that student difficulty with cross product direction is not as simple as misapplied right-hand rules, although this is an issue. Student behavior on cross product direction questions is significantly dependent on both the context of the question and the representation of various problem features. Although more research is necessary, particularly in regard to individual differences, this study represents a significant step forward in our understanding of student difficulties with cross product direction.

Multi-point objective-oriented sequential sampling strategy for constrained robust design

NASA Astrophysics Data System (ADS)

Zhu, Ping; Zhang, Siliang; Chen, Wei

2015-03-01

Metamodelling techniques are widely used to approximate system responses of expensive simulation models. In association with the use of metamodels, objective-oriented sequential sampling methods have been demonstrated to be effective in balancing the need for searching an optimal solution versus reducing the metamodelling uncertainty. However, existing infilling criteria are developed for deterministic problems and restricted to one sampling point in one iteration. To exploit the use of multiple samples and identify the true robust solution in fewer iterations, a multi-point objective-oriented sequential sampling strategy is proposed for constrained robust design problems. In this article, earlier development of objective-oriented sequential sampling strategy for unconstrained robust design is first extended to constrained problems. Next, a double-loop multi-point sequential sampling strategy is developed. The proposed methods are validated using two mathematical examples followed by a highly nonlinear automotive crashworthiness design example. The results show that the proposed method can mitigate the effect of both metamodelling uncertainty and design uncertainty, and identify the robust design solution more efficiently than the single-point sequential sampling approach.

Persistent left unilateral mirror writing: A neuropsychological case study.

PubMed

Angelillo, Valentina G; De Lucia, Natascia; Trojano, Luigi; Grossi, Dario

2010-09-01

Mirror writing (MW) is a rare disorder in which a script runs in direction opposite to normal and individual letters are reversed. The disorder generally occurs after left-hemisphere lesions, is transient and is observed on the left hand, whereas usually motor impairments prevent assessment of direction of right handwriting. We describe a left-handed patient with complete left hand mirror writing, still evident 2 years after a hemorrhagic stroke in left nucleo-capsular region. Since the patient could write with his right hand he underwent several writing tasks with either hand, and a thorough assessment to clarify the nature of MW. MW was evident in writing to dictation with left hand only, both in right and left hemispace, but the patient could modify his behavior when a verbal instruction was provided. No mirror errors were found in reading words, in copying geometric figures and in spatial orientation tasks. MW in our patient could be accounted for by a failure in automatic transformation of grapho-motor programs to write with the left hand. A lack of concern (a sort of anosodiaphoria) and a poor cognitive flexibility could contribute to long-term persistence of MW. 2010 Elsevier Inc. All rights reserved.

Hazardous materials emergency response mobile robot

NASA Technical Reports Server (NTRS)

Stone, Henry W. (Inventor); Lloyd, James (Inventor); Alahuzos, George (Inventor)

1992-01-01

A simple or unsophisticated robot incapable of effecting straight-line motion at the end of its arm inserts a key held in its end effector or hand into a door lock with nearly straight-line motion by gently thrusting its back heels downwardly so that it pivots forwardly on its front toes while holding its arm stationary. The relatively slight arc traveled by the robot's hand is compensated by a complaint tool with which the robot hand grips the door key. A visible beam is projected through the axis of the hand or gripper on the robot arm end at an angle to the general direction in which the robot thrusts the gripper forward. As the robot hand approaches a target surface, a video camera on the robot wrist watches the beam spot on the target surface fall from a height proportional to the distance between the robot hand and the target surface until the beam spot is nearly aligned with the top of the robot hand. Holes in the front face of the hand are connected through internal passages inside the arm to an on-board chemical sensor. Full rotation of the hand or gripper about the robot arm's wrist is made possible by slip rings in the wrist which permit passage of the gases taken in through the nose holes in the front of the hand through the wrist regardless of the rotational orientation of the wrist.

Interactive Design and Development of Real Arm Movements for Application in Rehabilitation

NASA Astrophysics Data System (ADS)

Rosman, Rafidah; Hadi, Muhammad Zaidan Abdul; Abu Bakar, Nurulliyana

2018-03-01

An interactive real arm movements for application in rehabilitation is designed and developed. The aim is to encourage hand paralysis patients performing their physical therapy by introducing games application in replacing conventional hand therapy module and methods. In this project, the accelerometer is used for tracking the orientation of the arm. As the arm moves, the values from x, y and z axis from the accelerometer changes and are being read by the Analog Inputs of the Arduino Board. After being read by the Analog Inputs of the Arduino Board, the 3D model moves as well. Solidworks software was used to modeled the hand in which the data is then transferred to Matlab/Simulink using SimMechanicalLink from Mathworks. Lastly, the sensor glove was programmed to work as a controller of games application in hand rehabilitation thus makes it an enjoyable therapy process.

Ready steady push--a study of the role of arm posture in manual exertions.

PubMed

Okunribido, Olanrewaju O; Haslegrave, Christine M

2008-02-01

This study investigated arm posture and hand forces during bi-manual pushing. Nine male and eight female participants performed isometric exertions at two reach distances (0 and elbow-grip) and six different positions of the hand interface (handle), defined by the plane (longitudinal, lateral, horizontal) and orientation (0 degrees and 45 degrees). Electrogoniometer instruments were used to measure the displacements/postures of the wrist and elbow joints and the forearm, and force measuring strain gauges were used to measure the exerted hand forces (x-, y- and z-components). The results showed that ability to vary arm posture, particularly the forearm, is important during build up of force and that people tend to seek for a balance in the forces applied at the hands by exerting more in the vertical direction. Also, lateral plane handle positions permitted exertion of greater forces than longitudinal and horizontal plane positions.

Grasp posture alters visual processing biases near the hands

PubMed Central

Thomas, Laura E.

2015-01-01

Observers experience biases in visual processing for objects within easy reach of their hands that may assist them in evaluating items that are candidates for action. I investigated the hypothesis that hand postures affording different types of actions differentially bias vision. Across three experiments, participants performed global motion detection and global form perception tasks while their hands were positioned a) near the display in a posture affording a power grasp, b) near the display in a posture affording a precision grasp, or c) in their laps. Although the power grasp posture facilitated performance on the motion task, the precision grasp posture instead facilitated performance on the form task. These results suggest that the visual system weights processing based on an observer’s current affordances for specific actions: fast and forceful power grasps enhance temporal sensitivity, while detail-oriented precision grasps enhance spatial sensitivity. PMID:25862545

Mechanical Twinning and Microstructures in Experimentally Stressed Quartzite

NASA Astrophysics Data System (ADS)

Minor, A.; Sintubin, M.; Wenk, H. R.; Rybacki, E.

2015-12-01

Since Dauphiné twins in quartz have been identified as a stress-related intracrystalline microstructure, several electron backscatter diffraction (EBSD) studies revealed that Dauphiné twins are present in naturally deformed quartz-bearing rocks in a wide range of tectono-metamorphic conditions. EBSD studies on experimentally stressed quartzite showed that crystals with particular crystallographic orientations contain many Dauphiné twin boundaries, while neighboring crystals with different orientations are largely free of twin boundaries. To understand the relationship between stress direction and orientation of Dauphiné twinned quartz crystals, a detailed EBSD study was performed on experimentally stressed quartzite samples and compared with an undeformed reference sample. We stressed 4 cylindrical samples in triaxial compression in a Paterson type gas deformation apparatus at GFZ Potsdam. Experimental conditions were 300MPa confining pressure, 500°C temperature and axial stresses of 145MPa, 250MPa and 460MPa for about 30 hours, resulting in a minor strain <0.04%. EBSD scans were obtained with a Zeiss Evo scanning electron microscope and TSL software at UC Berkeley. The EBSD maps show that Dauphiné twinning is present in the starting material as well as in experimentally stressed samples. Pole figures of the bulk orientation of the reference sample compared with stressed samples show a significant difference regarding the distribution for the r and z directions. The reference sample shows an indistinct maximum for r and z, whereas the stressed samples show a maximum for r poles and a minimum for z poles in the axial stress direction. EBSD scans of the reference and stressed samples were further analyzed manually to identify the orientations of single grains, which are free of twin boundaries and those, which contain twin boundaries. This analysis aims to quantify the relationship of crystal orientation and stress magnitude to initiate mechanical twinning.

An exploratory study of differences in views of factors affecting sexual orientation for a sample of lesbians and gay men.

PubMed

Otis, Melanie D; Skinner, William F

2004-06-01

An exploratory study of lesbians (70) and gay men (118) from a rural state in the mid-South was conducted using a self-administered, mail-out survey. The nonrandom sample was drawn from organizational mailing lists, snowball sampling, and a convenience sample at a community event. Respondents were asked to indicate the extent to which each of the following affected sexual orientation: genetics, relationship between parents, relationship with parents, birth order, peers, growing up in a dysfunctional family, growing up in a single-parent family, negative experiences with the opposite sex, and positive experiences with the same sex. Similar to studies of heterosexual men and women, these gay men were more likely to view sexual orientation as a result of genetics than the lesbian respondents. Further, the lesbian group were more likely to view positive relationships with the same sex to have a great influence on sexual orientation. These data indicate there are sex differences in views on factors that affect sexual orientation.

Testing Cross-Cultural Generalizability of the Task and Ego Orientation in Sport Questionnaire across American and Chinese Samples

PubMed Central

Monsma, Eva

2016-01-01

This paper examines the factor structure and measurement invariance of the Task and Ego Orientation in Sport Questionnaire (TEOSQ) across American and Chinese samples. Results based on the mean and covariance structure analyses supported configural invariance, metric invariance and scalar invariance across groups. Latent means analyses revealed that American sample had significantly higher mean scores on task and ego orientations than the Chinese sample. The findings suggest that the TEOSQ is a valid and reliable instrument in assessing achievement motivation across these two diverse populations. PMID:27399869

Interplanetary Magnetic Flux Ropes as Agents Connecting Solar Eruptions and Geomagnetic Activities

NASA Astrophysics Data System (ADS)

Marubashi, K.; Cho, K.-S.; Ishibashi, H.

2017-12-01

We investigate the solar wind structure for 11 cases that were selected for the campaign study promoted by the International Study of Earth-affecting Solar Transients (ISEST) MiniMax24 Working Group 4. We can identify clear flux rope signatures in nine cases. The geometries of the nine interplanetary magnetic flux ropes (IFRs) are examined with a model-fitting analysis with cylindrical and toroidal force-free flux rope models. For seven cases in which magnetic fields in the solar source regions were observed, we compare the IFR geometries with magnetic structures in their solar source regions. As a result, we can confirm the coincidence between the IFR orientation and the orientation of the magnetic polarity inversion line (PIL) for six cases, as well as the so-called helicity rule as regards the handedness of the magnetic chirality of the IFR, depending on which hemisphere of the Sun the IFR originated from, the northern or southern hemisphere; namely, the IFR has right-handed (left-handed) magnetic chirality when it is formed in the southern (northern) hemisphere of the Sun. The relationship between the orientation of IFRs and PILs can be taken as evidence that the flux rope structure created in the corona is in most cases carried through interplanetary space with its orientation maintained. In order to predict magnetic field variations on Earth from observations of solar eruptions, further studies are needed about the propagation of IFRs because magnetic fields observed at Earth significantly change depending on which part of the IFR hits the Earth.

Software framework for automatic learning of telescope operation

NASA Astrophysics Data System (ADS)

Rodríguez, Jose A.; Molgó, Jordi; Guerra, Dailos

2016-07-01

The "Gran Telescopio de Canarias" (GTC) is an optical-infrared 10-meter segmented mirror telescope at the ORM observatory in Canary Islands (Spain). The GTC Control System (GCS) is a distributed object and component oriented system based on RT-CORBA and it is responsible for the operation of the telescope, including its instrumentation. The current development state of GCS is mature and fully operational. On the one hand telescope users as PI's implement the sequences of observing modes of future scientific instruments that will be installed in the telescope and operators, in turn, design their own sequences for maintenance. On the other hand engineers develop new components that provide new functionality required by the system. This great work effort is possible to minimize so that costs are reduced, especially if one considers that software maintenance is the most expensive phase of the software life cycle. Could we design a system that allows the progressive assimilation of sequences of operation and maintenance of the telescope, through an automatic self-programming system, so that it can evolve from one Component oriented organization to a Service oriented organization? One possible way to achieve this is to use mechanisms of learning and knowledge consolidation to reduce to the minimum expression the effort to transform the specifications of the different telescope users to the operational deployments. This article proposes a framework for solving this problem based on the combination of the following tools: data mining, self-Adaptive software, code generation, refactoring based on metrics, Hierarchical Agglomerative Clustering and Service Oriented Architectures.

Sparse Bayesian Inference of White Matter Fiber Orientations from Compressed Multi-resolution Diffusion MRI

PubMed Central

Pisharady, Pramod Kumar; Duarte-Carvajalino, Julio M; Sotiropoulos, Stamatios N; Sapiro, Guillermo; Lenglet, Christophe

2017-01-01

The RubiX [1] algorithm combines high SNR characteristics of low resolution data with high spacial specificity of high resolution data, to extract microstructural tissue parameters from diffusion MRI. In this paper we focus on estimating crossing fiber orientations and introduce sparsity to the RubiX algorithm, making it suitable for reconstruction from compressed (under-sampled) data. We propose a sparse Bayesian algorithm for estimation of fiber orientations and volume fractions from compressed diffusion MRI. The data at high resolution is modeled using a parametric spherical deconvolution approach and represented using a dictionary created with the exponential decay components along different possible directions. Volume fractions of fibers along these orientations define the dictionary weights. The data at low resolution is modeled using a spatial partial volume representation. The proposed dictionary representation and sparsity priors consider the dependence between fiber orientations and the spatial redundancy in data representation. Our method exploits the sparsity of fiber orientations, therefore facilitating inference from under-sampled data. Experimental results show improved accuracy and decreased uncertainty in fiber orientation estimates. For under-sampled data, the proposed method is also shown to produce more robust estimates of fiber orientations. PMID:28845484

Sparse Bayesian Inference of White Matter Fiber Orientations from Compressed Multi-resolution Diffusion MRI.

PubMed

Pisharady, Pramod Kumar; Duarte-Carvajalino, Julio M; Sotiropoulos, Stamatios N; Sapiro, Guillermo; Lenglet, Christophe

2015-10-01

The RubiX [1] algorithm combines high SNR characteristics of low resolution data with high spacial specificity of high resolution data, to extract microstructural tissue parameters from diffusion MRI. In this paper we focus on estimating crossing fiber orientations and introduce sparsity to the RubiX algorithm, making it suitable for reconstruction from compressed (under-sampled) data. We propose a sparse Bayesian algorithm for estimation of fiber orientations and volume fractions from compressed diffusion MRI. The data at high resolution is modeled using a parametric spherical deconvolution approach and represented using a dictionary created with the exponential decay components along different possible directions. Volume fractions of fibers along these orientations define the dictionary weights. The data at low resolution is modeled using a spatial partial volume representation. The proposed dictionary representation and sparsity priors consider the dependence between fiber orientations and the spatial redundancy in data representation. Our method exploits the sparsity of fiber orientations, therefore facilitating inference from under-sampled data. Experimental results show improved accuracy and decreased uncertainty in fiber orientation estimates. For under-sampled data, the proposed method is also shown to produce more robust estimates of fiber orientations.

Training complexity is not decisive factor for improving adaptation to visual sensory conflict.

PubMed

Yang, Yang; Pu, Fang; Li, Shuyu; Li, Yan; Li, Deyu; Fan, Yubo

2012-01-01

Ground-based preflight training utilizing unusual visual stimuli is useful for decreasing the susceptibility to space motion sickness (SMS). The effectiveness of the sensorimotor adaptation training is affected by the training tasks, but what kind of task is more effective remains unknown. Whether the complexity is the decisive factor to consider for designing the training and if other factors are more important need to be analyzed. The results from the analysis can help to optimize the preflight training tasks for astronauts. Twenty right-handed subjects were asked to draw the right path of 45° rotated maze before and after 30 min training. Subjects wore an up-down reversing prism spectacle in test and training sessions. Two training tasks were performed: drawing the right path of the horizontal maze (complex task but with different orientation feature) and drawing the L-shape lines (easy task with same orientation feature). The error rate and the executing time were measured during the test. Paired samples t test was used to compare the effects of the two training tasks. After each training, the error rate and the executing time were significantly decreased. However, the training effectiveness of the easy task was better as the test was finished more quickly and accurately. The complexity is not always the decisive factor for designing the adaptation training task, e.g. the orientation feature is more important in this study. In order to accelerate the adaptation and to counter SMS, the task for astronauts preflight adaptation training could be simple activities with the key features.

Effect of sequence and stereochemistry reversal on p53 peptide mimicry.

PubMed

Atzori, Alessio; Baker, Audrey E; Chiu, Mark; Bryce, Richard A; Bonnet, Pascal

2013-01-01

Peptidomimetics effective in modulating protein-protein interactions and resistant to proteolysis have potential in therapeutic applications. An appealing yet underperforming peptidomimetic strategy is to employ D-amino acids and reversed sequences to mimic a lead peptide conformation, either separately or as the combined retro-inverso peptide. In this work, we examine the conformations of inverse, reverse and retro-inverso peptides of p53(15-29) using implicit solvent molecular dynamics simulation and circular dichroism spectroscopy. In order to obtain converged ensembles for the peptides, we find enhanced sampling is required via the replica exchange molecular dynamics method. From these replica exchange simulations, the D-peptide analogues of p53(15-29) result in a predominantly left-handed helical conformation. When the parent sequence is reversed sequence as either the L-peptide and D-peptide, these peptides display a greater helical propensity, feature reflected by NMR and CD studies in TFE/water solvent. The simulations also indicate that, while approximately similar orientations of the side-chains are possible by the peptide analogues, their ability to mimic the parent peptide is severely compromised by backbone orientation (for D-amino acids) and side-chain orientation (for reversed sequences). A retro-inverso peptide is disadvantaged as a mimic in both aspects, and further chemical modification is required to enable this concept to be used fruitfully in peptidomimetic design. The replica exchange molecular simulation approach adopted here, with its ability to provide detailed conformational insights into modified peptides, has potential as a tool to guide structure-based design of new improved peptidomimetics.

Three-dimensional full-field X-ray orientation microscopy

PubMed Central

Viganò, Nicola; Tanguy, Alexandre; Hallais, Simon; Dimanov, Alexandre; Bornert, Michel; Batenburg, Kees Joost; Ludwig, Wolfgang

2016-01-01

A previously introduced mathematical framework for full-field X-ray orientation microscopy is for the first time applied to experimental near-field diffraction data acquired from a polycrystalline sample. Grain by grain tomographic reconstructions using convex optimization and prior knowledge are carried out in a six-dimensional representation of position-orientation space, used for modelling the inverse problem of X-ray orientation imaging. From the 6D reconstruction output we derive 3D orientation maps, which are then assembled into a common sample volume. The obtained 3D orientation map is compared to an EBSD surface map and local misorientations, as well as remaining discrepancies in grain boundary positions are quantified. The new approach replaces the single orientation reconstruction scheme behind X-ray diffraction contrast tomography and extends the applicability of this diffraction imaging technique to material micro-structures exhibiting sub-grains and/or intra-granular orientation spreads of up to a few degrees. As demonstrated on textured sub-regions of the sample, the new framework can be extended to operate on experimental raw data, thereby bypassing the concept of orientation indexation based on diffraction spot peak positions. This new method enables fast, three-dimensional characterization with isotropic spatial resolution, suitable for time-lapse observations of grain microstructures evolving as a function of applied strain or temperature. PMID:26868303

The effect of hand movements on numerical bisection judgments in early blind and sighted individuals.

PubMed

Rinaldi, Luca; Vecchi, Tomaso; Fantino, Micaela; Merabet, Lotfi B; Cattaneo, Zaira

2015-10-01

Recent evidence suggests that in representing numbers blind individuals might be affected differently by proprioceptive cues (e.g., hand positions, head turns) than are sighted individuals. In this study, we asked a group of early blind and sighted individuals to perform a numerical bisection task while executing hand movements in left or right peripersonal space and with either hand. We found that in bisecting ascending numerical intervals, the hemi-space in which the hand was moved (but not the moved hand itself) influenced the bisection bias similarly in both early blind and sighted participants. However, when numerical intervals were presented in descending order, the moved hand (and not the hemi-space in which it was moved) affected the bisection bias in all participants. Overall, our data show that the operation to be performed on the mental number line affects the activated spatial reference frame, regardless of participants' previous visual experience. In particular, both sighted and early blind individuals' representation of numerical magnitude is mainly rooted in world-centered coordinates when numerical information is given in canonical orientation (i.e., from small to large), whereas hand-centered coordinates become more relevant when the scanning of the mental number line proceeds in non-canonical direction. Copyright © 2015 Elsevier Ltd. All rights reserved.

The effect of hand movements on numerical bisection judgments in early blind and sighted individuals

PubMed Central

Rinaldi, Luca; Vecchi, Tomaso; Fantino, Micaela; Merabet, Lotfi B.; Cattaneo, Zaira

2017-01-01

Recent evidence suggests that in representing numbers blind individuals might be affected differently by proprioceptive cues (e.g., hand positions, head turns) than are sighted individuals. In this study, we asked a group of early blind and sighted individuals to perform a numerical bisection task while executing hand movements in left or right peripersonal space and with either hand. We found that in bisecting ascending numerical intervals, the hemi-space in which the hand was moved (but not the moved hand itself) influenced the bisection bias similarly in both early blind and sighted participants. However, when numerical intervals were presented in descending order, the moved hand (and not the hemi-space in which it was moved) affected the bisection bias in all participants. Overall, our data show that the operation to be performed on the mental number line affects the activated spatial reference frame, regardless of participants’ previous visual experience. In particular, both sighted and early blind individuals’ representation of numerical magnitude is mainly rooted in world-centered coordinates when numerical information is given in canonical orientation (i.e. from small to large), whereas hand-centered coordinates become more relevant when the scanning of the mental number line proceeds in non-canonical direction. PMID:26184675

Landscape Management: Field Operator.

ERIC Educational Resources Information Center

Smith, Carole A.

These materials for a six-unit course were developed to prepare secondary and postsecondary students for entry-level positions in landscape management. The six units are on orientation, hand tools, light power equipment, water and watering techniques, planting and maintaining plant beds, and establishing and maintaining turf. The first section is…

Tornado! An Event-Based Science Module. Student Edition. Meteorology Module.

ERIC Educational Resources Information Center

Wright, Russell G.

This book is designed for middle school students to learn scientific literacy through event-based science. Unlike traditional curricula, the event-based earth science module is a student-centered, interdisciplinary, inquiry-oriented program that emphasizes cooperative learning, teamwork, independent research, hands-on investigations, and…

Earthquake!: An Event-Based Science Module. Student Edition. Earth Science Module.

ERIC Educational Resources Information Center

Wright, Russell G.

This book is designed for middle school students to learn scientific literacy through event-based science. Unlike traditional curricula, the event-based earth science module is a student-centered, interdisciplinary, inquiry-oriented program that emphasizes cooperative learning, teamwork, independent research, hands-on investigations, and…

Volcano!: An Event-Based Science Module. Student Edition. Geology Module.

ERIC Educational Resources Information Center

Wright, Russell G.

This book is designed for middle school students to learn scientific literacy through event-based science. Unlike traditional curricula, the event-based earth science module is a student-centered, interdisciplinary, inquiry-oriented program that emphasizes cooperative learning, teamwork, independent research, hands-on investigations, and…

Heavy Equipment Mechanic. Instructor Edition.

ERIC Educational Resources Information Center

Hendrix, Laborn J.; And Others

This manual is intended to assist heavy equipment instructors in teaching the latest concepts and functions of heavy equipment. It includes 7 sections and 27 instructional units. Sections (and units) are: orientation (shop safety and first aid, hand tools and miscellaneous tools, measuring, basic rigging and hoisting), engines (basic engine…

Oil Spill! An Event-Based Science Module. Student Edition. Oceanography Module.

ERIC Educational Resources Information Center

Wright, Russell G.

This book is designed for middle school students to learn scientific literacy through event-based science. Unlike traditional curricula, the event-based earth science module is a student-centered, interdisciplinary, inquiry-oriented program that emphasizes cooperative learning, teamwork, independent research, hands-on investigations, and…

A new approach to hand-based authentication

NASA Astrophysics Data System (ADS)

Amayeh, G.; Bebis, G.; Erol, A.; Nicolescu, M.

2007-04-01

Hand-based authentication is a key biometric technology with a wide range of potential applications both in industry and government. Traditionally, hand-based authentication is performed by extracting information from the whole hand. To account for hand and finger motion, guidance pegs are employed to fix the position and orientation of the hand. In this paper, we consider a component-based approach to hand-based verification. Our objective is to investigate the discrimination power of different parts of the hand in order to develop a simpler, faster, and possibly more accurate and robust verification system. Specifically, we propose a new approach which decomposes the hand in different regions, corresponding to the fingers and the back of the palm, and performs verification using information from certain parts of the hand only. Our approach operates on 2D images acquired by placing the hand on a flat lighting table. Using a part-based representation of the hand allows the system to compensate for hand and finger motion without using any guidance pegs. To decompose the hand in different regions, we use a robust methodology based on morphological operators which does not require detecting any landmark points on the hand. To capture the geometry of the back of the palm and the fingers in suffcient detail, we employ high-order Zernike moments which are computed using an effcient methodology. The proposed approach has been evaluated on a database of 100 subjects with 10 images per subject, illustrating promising performance. Comparisons with related approaches using the whole hand for verification illustrate the superiority of the proposed approach. Moreover, qualitative comparisons with state-of-the-art approaches indicate that the proposed approach has comparable or better performance.

36 CFR 9.82 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... may include aerial photography; remote sensing; hand-sampling of geologic materials; hand-sampling or....) and National Park Service policies concerning wilderness management and the use of motorized equipment...

Age-Related Physical Changes Interfere With Judgments of Male Sexual Orientation From Faces.

PubMed

Tskhay, Konstantin O; Krendl, Anne C; Rule, Nicholas O

2016-09-01

Although studies have shown that sexual orientation can be judged from faces, this research has not considered how age-related differences in perceivers or targets affect such judgments. In the current work, we evaluated whether accuracy differed among young adults (YA) and older adults (OA) for young and old men's faces by recruiting a sample of YA and OA in the lab, a community sample of sexual minority men, and a sample of online participants. We found that OA and YA judged sexual orientation with similar accuracy. Perceptions of gender atypicality mediated the difference in judging older and younger targets' sexual orientation. Although participants used positive affect to correctly discern sexual orientation regardless of target age, perceptions of masculinity were valid only for judgments of YA. © 2016 by the Society for Personality and Social Psychology, Inc.

Is the cup orientation different in bilateral total hip arthroplasty with right-handed surgeons using posterolateral approach?

PubMed

Song, Xinggui; Ni, Ming; Li, Heng; Li, Xin; Li, Xiang; Fu, Jun; Chen, Jiying

2018-05-23

The impact of surgeon handedness on acetabular cup orientation in total hip arthroplasty (THA) is not well studied. The aim of our study is to investigate the difference of cup orientation in bilateral THA performed by right-handed surgeons using posterolateral approach and which cup could be fitter to Lewinneck's safe zone. The study consisted of 498 patients that underwent bilateral THA by three right-handed surgeons in our hospital. Postoperative acetabular cup anteversion and abduction on an anteroposterior pelvic radiograph were measured by Orthoview software (Orthoview LLC, Jacksonville, Florida). Furthermore, the percentage of cup placement within the safe zone was compared. The mean anteversion was 25.28 (25.28° ± 7.16°) in left THA and 22.01 (22.01° ± 6.35°) in right THA (p < 0.001). The mean abduction was 37.50 (37.50° ± 6.76°) in left THA and 38.59 (38.59° ± 6.84°) in right THA (p = 0.011). In the left side, the cup was positioned in Lewinnek's safe zone in 52% for anteversion, 87% for abduction, and 46% for both anteversion and abduction. But the cup placement within Lewinnek's safe zone was 71, 88, and 62% in the right side, respectively. There were significant differences in the percentage of acetabular cup placement within the safe zone for anteversion (p < 0.001) and for both anteversion and inclination (p < 0.001). Dislocation occurred in 7.0% (35/498) of cases in left THA and 3.2% (16/498) in right THA. The percentages of patients experiencing dislocation were significantly different between the two sides (p = 0.006). This current study demonstrated that surgeon handedness is likely to be a contributing factor that affects cup inclination and anteversion in bilateral THA and that the placement of cup performed by dominant hands of surgeons is more accurate than that performed by non-dominant sides.

Planar covariance of upper and lower limb elevation angles during hand-foot crawling in healthy young adults.

PubMed

MacLellan, M J; Catavitello, G; Ivanenko, Y P; Lacquaniti, F

2017-11-01

Habitual quadrupeds have been shown to display a planar covariance of segment elevation angle waveforms in the fore and hind limbs during many forms of locomotion. The purpose of the current study was to determine if humans generate similar patterns in the upper and lower limbs during hand-foot crawling. Nine healthy young adults performed hand-foot crawling on a treadmill at speeds of 1, 2, and 3 km/h. A principal component analysis (PCA) was applied to the segment elevation angle waveforms for the upper (upper arm, lower arm, and hand) and lower (thigh, shank, and foot) limbs separately. The planarity of the elevation angle waveforms was determined using the sum of the variance explained by the first two PCs and the orientation of the covariance plane was quantified using the direction cosines of the eigenvector orthogonal to the plane, projected upon each of the segmental semi-axes. Results showed that planarity of segment elevation angles was maintained in the upper and lower limbs (explained variance >97%), although a slight decrease was present in the upper limb when crawling at 3 km/h. The orientation of the covariance plane was highly limb-specific, consistent with animal studies and possibly related to the functional neural control differences between the upper and lower limbs. These results may suggest that the motor patterns stored in the central nervous system for quadrupedal locomotion may be retained through evolution and may still be exploited when humans perform such tasks.

Effect of various SnO2 pH on ZnO/SnO2-composite film via immersion technique

NASA Astrophysics Data System (ADS)

Malek, M. F.; Mohamed, R.; Mamat, M. H.; Ismail, A. S.; Yusoff, M. M.; Rusop, M.

2018-05-01

ZnO/SnO2-composite film has been synthesized via immersion technique with various pH of SnO2. The pH of SnO2 were varied between 4.5 and 6.5. The optical measurements of the samples were carried out using Varian Cary 5000 UV-Vis spectrophotometer within the range from 350 nm to 800 nm at room temperature in air with a data interval of 1 nm. On the other hand, the optical photoluminescence properties were measured by a photoluminescence spectrometer (PL, model: Horiba Jobin Yvon - 79 DU420A-OE-325) using a He-Cd laser as the excitation source at 325 nm. These highly oriented ZnO/SnO2-composite film are potential for the creation of functional materials, such as the sensors, solar cells and etc.

Commensurability and stability in nonperiodic systems

PubMed Central

Fasano, Y.; De Seta, M.; Menghini, M.; Pastoriza, H.; de la Cruz, F.

2005-01-01

We have investigated the response of 3D Bi2Sr2CaCu2O8 vortex structures to a weak perturbation induced by 2D Fe pinning structures acting on one extremity of vortex lines. The pinning patterns were nano-engineered at the sample surface by means of either a Bitter decoration of the vortex lattice or electron-beam lithography. The commensurability conditions between 2D rigid pinning potentials and 3D elastic structures with short-range positional and long-range orientational correlation have been experimentally determined. When the 2D potential is a replica of the nonperiodic vortex structure an amplification of its interaction with the vortex structure takes place. This effect is detected only for the first matching field, becoming negligible for other matching fields. On the other hand, a periodic 2D perturbation is shown to transform the nonperiodic Bragg glass-like structure into an Abrikosov crystal with an effective Debye–Waller factor. PMID:16576763

Explaining sex differences in reactions to relationship infidelities: comparisons of the roles of sex, gender, beliefs, attachment, and sociosexual orientation.

PubMed

Brase, Gary L; Adair, Lora; Monk, Kale

2014-02-04

To the extent that sex differences are mediated by mechanisms such as sex-roles and beliefs, individual differences in these more proximate traits should account for significant portions of relevant sex differences. Differences between women and men in reactions to sexual and emotional infidelity were assessed in a large sample of participants (n = 477), and these target reactions were evaluated as a function of many potential proximate mediators (infidelity implications beliefs, gender-role beliefs, interpersonal trust, attachment style, sociosexuality, and culture of honor beliefs) and as a function of participant sex. Results found a consistent sex difference that was not mediated by any other variables, although a handful of other variables were related to male, but not female, individual differences. These findings suggest particularly promising directions for future research on integrating evolutionarily based sex differences and proximate individual differences.

A morphological basis for orientation tuning in primary visual cortex.

PubMed

Mooser, François; Bosking, William H; Fitzpatrick, David

2004-08-01

Feedforward connections are thought to be important in the generation of orientation-selective responses in visual cortex by establishing a bias in the sampling of information from regions of visual space that lie along a neuron's axis of preferred orientation. It remains unclear, however, which structural elements-dendrites or axons-are ultimately responsible for conveying this sampling bias. To explore this question, we have examined the spatial arrangement of feedforward axonal connections that link non-oriented neurons in layer 4 and orientation-selective neurons in layer 2/3 of visual cortex in the tree shrew. Target sites of labeled boutons in layer 2/3 resulting from focal injections of biocytin in layer 4 show an orientation-specific axial bias that is sufficient to confer orientation tuning to layer 2/3 neurons. We conclude that the anisotropic arrangement of axon terminals is the principal source of the orientation bias contributed by feedforward connections.

Microbial Efficacy of Waterless Hand Hygiene in Dar es Salaam, Tanzania

NASA Astrophysics Data System (ADS)

Pickering, A.; Boehm, A.; Davis, J.

2008-12-01

Millions of people die from diarrheal and respiratory diseases every year due to lack of proper sanitation, hygiene, and access to clean water. The act of handwashing with soap has been found to effectively reduce both diarrheal and respiratory illness, however, handwashing at critical times (i.e. after using the toilet, before preparing food) remains infrequent around the world. This research investigates the potential for alcohol- based hand sanitizer (ABHS) to be an effective and appropriate hand hygiene option in developing countries. A study was conducted to assess the microbiological effectiveness of ABHS, as compared to handwashing with soap and water, in field conditions in Dar es Salaam, Tanzania. A total of 205 participants, including mothers, nurses, students, and teachers, were introduced to ABHS, given a standardized amount (2ml) of product, and instructed on how to use the product correctly. Hand samples were obtained using the hand rinse method before and after the use of ABHS from 152 participants. The other 53 participants were hand sampled before and after handwashing with a non-antimicrobial liquid soap and clean water (prior to using ABHS). Visual inspections of the hands were performed before hand sampling to record the level of dirt on the hands. All hand samples were processed and analyzed by membrane filtration for concentrations of two microbial indicators, enterococci and E. coli. User perceptions of the product and willingness to pay are also documented. The results of this study provide valuable insight on the prospective of promoting ABHS in developing countries and water scarce areas.

Material characterization in partially filled waveguides using inverse scattering and multiple sample orientations

NASA Astrophysics Data System (ADS)

Sjöberg, Daniel; Larsson, Christer

2015-06-01

We present a method aimed at reducing uncertainties and instabilities when characterizing materials in waveguide setups. The method is based on measuring the S parameters for three different orientations of a rectangular sample block in a rectangular waveguide. The corresponding geometries are modeled in a commercial full-wave simulation program, taking any material parameters as input. The material parameters of the sample are found by minimizing the squared distance between measured and calculated S parameters. The information added by the different sample orientations is quantified using the Cramér-Rao lower bound. The flexibility of the method allows the determination of material parameters of an arbitrarily shaped sample that fits in the waveguide.

Probe for high resolution NMR with sample reorientation

DOEpatents

Pines, Alexander; Samoson, Ago

1990-01-01

An improved NMR probe and method are described which substantially improve the resolution of NMR measurements made on powdered or amorphous or otherwise orientationally disordered samples. The apparatus mechanically varies the orientation of the sample such that the time average of two or more sets of spherical harmonic functions are zero.

Bruised Poultry Tissue as a Possible Source of Staphylococcal Infection

PubMed Central

Roskey, C. T.; Hamdy, M. K.

1972-01-01

Bacteriological analyses were made on 45 swab samples secured from hands of poultry workers on processing line, on 31 bruised and 15 normal poultry tissue samples, and on 15 swabs obtained from infected lacerations and exudates of abcesses on hands, arms, chest, and abdomen of poultry workers. A total of 170 Staphylococcus cultures were isolated from samples examined. These cultures were characterized morphologically and biochemically and then grouped into six distinct patterns. S. aureus was found in 86.6% of swab samples obtained from infected workers, in 40% of swabs from hands of workers who handle bruised birds, and in 38.7% of bruised tissues, and was absent from all samples obtained from hands of workers who do not handle bruised birds. All the coagulase-positive staphylococcal isolates were bacteriophage-typed, and the results showed that the same phage-type S. aureus was found in many poultry bruises and in infected lesions of poultry workers as well as on hands of workers who handle bruised birds. These results indicate that poultry bruises are a source of staphylococcal infection encountered among poultry workers. PMID:4553136

Science Adventures with Children's Literature: A Thematic Approach.

ERIC Educational Resources Information Center

Fredericks, Anthony D.

This guide provides background information on the development and implementation of thematic units that focus on a hands-on approach, process orientation, integrated curriculum, cooperative learning, and critical thinking. Topics of the thematic units and mini-units include wild animals, dinosaurs, rainforests, the human body, earth science,…

Toxic Leak!: An Event-Based Science Module. Student Edition. Groundwater Module.

ERIC Educational Resources Information Center

Wright, Russell G.

This book is designed for the middle school students to learn scientific literacy through event-based science. Unlike traditional curricula, the event-based earth science module is a student-centered, interdisciplinary, inquiry-oriented program that emphasizes cooperative learning, teamwork, independent research, hands-on investigations, and…

Stimulating Divergent Thinking in Junior High Career Education.

ERIC Educational Resources Information Center

Ranke, Charlotte; Champoux, Ellen M.

1981-01-01

Describes a middle school career-oriented teaching unit with emphasis on teaching for divergent thinking. The unit provides hands-on opportunities for eighth-grade students to explore careers using the knowledge and skills developed in their home economics class. The careers are restaurant management, hospitality service, and interior design. (CT)

Fire!: An Event-Based Science Module. Student Edition. Chemistry and Fire Ecology Module.

ERIC Educational Resources Information Center

Wright, Russell G.

This book is designed for middle school students to learn scientific literacy through event-based science. Unlike traditional curricula, the event-based earth science module is a student-centered, interdisciplinary, inquiry-oriented program that emphasizes cooperative learning, teamwork, independent research, hands-on investigations, and…

Hydroxyl orientations in cellobiose and other polyhydroxy compounds – modeling versus experiment

USDA-ARS?s Scientific Manuscript database

Theoretical and experimental gas-phase studies of carbohydrates show that their hydroxyl groups are located in homodromic partial rings that resemble cooperative hydrogen bonds, albeit with long H…O distances and small O-H…O angles. On the other hand, anecdotal experience with disaccharide crystal ...

38 CFR 21.240 - Medical treatment, care and services.

Code of Federal Regulations, 2010 CFR

2010-07-01

... ambulation, and one-hand typewriting; (ii) Orientation, adjustment, mobility and related services; (iii... and services. 21.240 Section 21.240 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS... 38 U.S.C. Chapter 31 Medical and Related Services § 21.240 Medical treatment, care and services. (a...

Targeted Courses in Inquiry Science for Future Elementary School Teachers

ERIC Educational Resources Information Center

Steinberg, Richard; Wyner, Yael; Borman, Greg; Salame, Issa I.

2015-01-01

This study reports on targeted science courses for undergraduate childhood education majors. We describe an inquiry-oriented, three-course sequence spanning physical, life, and environmental science. All three courses are hands-on and are designed to reflect the content and pedagogy most important to future elementary school teachers.

Techniques for Generating Objects in a Three-Dimensional CAD System.

ERIC Educational Resources Information Center

Goss, Larry D.

1987-01-01

Discusses coordinate systems, units of measure, scaling and levels as they relate to a database generated by a computer in a spatial rather than planer location. Describes geometric-oriented input, direct coordinates, transformations, annotation, editing and patterns. Stresses that hand drafting emulation is a short-sighted approach to…

Education With an Edge: An Introduction to Educational Programs at the Exploratorium.

ERIC Educational Resources Information Center

Preuss, Paul

1983-01-01

Discusses rationale for developing the Exploratorium at San Francisco's Museum of Science, Art, and Perception. Describes typical exhibits, hands-on nature of exhibits, and function of Explainers. Presents information about Exploratorium workshops (currently oriented toward upper elementary/junior high teachers), emphasizing the nature of science…

Commercial Carpentry: Instructional Units. INST-BBB08691;BBB12485

ERIC Educational Resources Information Center

Diehl, Donald W.; Penner, Wayman R.

The guide contains 11 sections, each consisting of one or more units of instruction in commercial carpentry. The sections cover the following: introduction (orientation, safety, and applying for a job), leadership, related information (lumber, measuring, and fasteners), power and hand tools, blueprint reading, site preparation and layout, forming,…

Spontaneous in-flight accommodation of hand orientation to unseen grasp targets: A case of action blindsight.

PubMed

Prentiss, Emily K; Schneider, Colleen L; Williams, Zoë R; Sahin, Bogachan; Mahon, Bradford Z

2018-03-15

The division of labour between the dorsal and ventral visual pathways is well established. The ventral stream supports object identification, while the dorsal stream supports online processing of visual information in the service of visually guided actions. Here, we report a case of an individual with a right inferior quadrantanopia who exhibited accurate spontaneous rotation of his wrist when grasping a target object in his blind visual field. His accurate wrist orientation was observed despite the fact that he exhibited no sensitivity to the orientation of the handle in a perceptual matching task. These findings indicate that non-geniculostriate visual pathways process basic volumetric information relevant to grasping, and reinforce the observation that phenomenal awareness is not necessary for an object's volumetric properties to influence visuomotor performance.

Role of dipolar interactions on morphologies and tunnel magnetoresistance in assemblies of magnetic nanoparticles

NASA Astrophysics Data System (ADS)

Anand, Manish; Carrey, Julian; Banerjee, Varsha

2018-05-01

We undertake comprehensive simulations of 2d arrays (Lx ×Ly) of magnetic nanoparticles (MNPs) with dipole-dipole interactions by solving LLG equations. Our primary interest is to understand the correspondence between equilibrium spin (ES) morphologies and tunnel magnetoresistance (TMR) as a function of Θ - the ratio of the dipolar to the anisotropy strength, sample size Lx , aspect ratio Ar =Ly /Lx and the direction of the applied field H → = HêH . The parameter Θ is varied by choosing three distinct particles: (i) α -Fe2O3 (Θ ≃ 0) , (ii) Co (Θ ≃ 0.37) and (iii) Fe3O4 (Θ ≃ 1.28) . Our main observations are as follows: (a) For weakly interacting spins (Θ ≃ 0) , the morphology has randomly oriented magnetic moments for all sample sizes and aspect ratios. The TMR exhibits a peak value of 50% at the coercive field Hc . It is robust with respect to Lx and Ar , and isotropic with respect to êH . (b) For strong interactions (Θ > 1) , the moments order in the plane of the sample. The ES morphology comprises of magnetically aligned regions interspersed with flux closure loops. For fields along x or y, the maximum TMR amplitude decrease to ∼30%. For êH = z ̂ , it drops to ∼3%. The TMR is robust with respect to Lx and Ar and isotropic in the x and y directions only. (c) In strongly interacting samples (Θ > 1) with Lx comparable to the size of a flux closure loop, increasing Ar creates ferromagnetic chains in the sample oriented along y or - y . Consequently, for êH = y ̂ , the TMR magnitude for Ar = 1 is ∼33% while that for Ar = 32 drops to ∼16%. For êH = x ̂ on the other hand, it is ∼30% and independent of Ar . The TMR of long ribbons of MNPs has a strong dependence on Ar and is anisotropic in all three directions.

Analysis of three variables in sampling solutions used to assay bacteria of hands: type of solution, use of antiseptic neutralizers, and solution temperature.

PubMed Central

Larson, E L; Strom, M S; Evans, C A

1980-01-01

Tests were performed using the sterile bag technique to determine the effects of type of sampling solution, use of antiseptic neutralizers, and solution temperature on the detection and quantitation of bacteria on hands. Using paired hand cultures, three sampling solutions were compared: quarter-strength Ringer solution, a phosphate buffer containing Triton X-100, and the same buffer containing antiseptic neutralizers. The phosphate buffer containing Triton X-100 was significantly better than quarter-strength Ringer solution in mean bacterial yield; the neutralizer-containing sampling solution was slightly better than Triton X-100-containing solution, although differences were not significant at the P = 0.05 level. Temperature (6 or 23 degrees C) of the sampling solution showed no consistent effect on bacterial yield from hands tested with the fluid containing neutralizers. PMID:7012171

Comparison of pressure pain threshold, grip strength,dexterity and touch pressure of dominant and non-dominant hands within and between right-and left-handed subjects.

PubMed

Ozcan, Ayse; Tulum, Zeliha; Pinar, Lamia; Başkurt, Ferdi

2004-12-01

This study was done to evaluate differences in pressure pain threshold, grip strength, manual dexterity and touch pressure threshold in the dominant and non-dominant hands of right- and left-handed subjects, and to compare findings within and between these groups. Thirty-nine right-handed and twenty-one left-handed subjects participated in the study. Pressure pain threshold was assessed using a dolorimeter, grip strength was assessed with a hand-grip dynamometer, manual dexterity was evaluated using the VALPAR Component Work Sample-4 system, and touch pressure threshold was determined using Semmes Weinstein monofilaments. Results for the dominant and non-dominant hands were compared within and between the groups. In the right-handed subjects, the dominant hand was significantly faster with the VALPAR Component Work Sample-4, showed significantly greater grip strength, and had a significantly higher pressure pain threshold than the non-dominant hand. The corresponding results for the two hands were similar in the left-handed subjects. The study revealed asymmetrical manual performance in grip strength, manual dexterity and pressure pain threshold in right-handed subjects, but no such asymmetries in left-handed subjects.

Rapid, all-optical crystal orientation imaging of two-dimensional transition metal dichalcogenide monolayers

DOE Office of Scientific and Technical Information (OSTI.GOV)

David, Sabrina N.; Zhai, Yao; van der Zande, Arend M.

Two-dimensional (2D) atomic materials such as graphene and transition metal dichalcogenides (TMDCs) have attracted significant research and industrial interest for their electronic, optical, mechanical, and thermal properties. While large-area crystal growth techniques such as chemical vapor deposition have been demonstrated, the presence of grain boundaries and orientation of grains arising in such growths substantially affect the physical properties of the materials. There is currently no scalable characterization method for determining these boundaries and orientations over a large sample area. We here present a second-harmonic generation based microscopy technique for rapidly mapping grain orientations and boundaries of 2D TMDCs. We experimentallymore » demonstrate the capability to map large samples to an angular resolution of ±1° with minimal sample preparation and without involved analysis. A direct comparison of the all-optical grain orientation maps against results obtained by diffraction-filtered dark-field transmission electron microscopy plus selected-area electron diffraction on identical TMDC samples is provided. This rapid and accurate tool should enable large-area characterization of TMDC samples for expedited studies of grain boundary effects and the efficient characterization of industrial-scale production techniques.« less

Method and sample spinning apparatus for measuring the NMR spectrum of an orientationally disordered sample

DOEpatents

Pines, Alexander; Samoson, Ago

1990-01-01

An improved NMR apparatus and method are described which substantially improve the resolution of NMR measurements made on powdered or amorphous or otherwise orientationally disordered samples. The apparatus spins the sample about an axis. The angle of the axis is mechanically varied such that the time average of two or more Legendre polynomials are zero.

C++ Programming Language

NASA Technical Reports Server (NTRS)

Shaykhian, Gholam Ali

2007-01-01

C++ Programming Language: The C++ seminar covers the fundamentals of C++ programming language. The C++ fundamentals are grouped into three parts where each part includes both concept and programming examples aimed at for hands-on practice. The first part covers the functional aspect of C++ programming language with emphasis on function parameters and efficient memory utilization. The second part covers the essential framework of C++ programming language, the object-oriented aspects. Information necessary to evaluate various features of object-oriented programming; including encapsulation, polymorphism and inheritance will be discussed. The last part of the seminar covers template and generic programming. Examples include both user defined and standard templates.

A comparison of paper-and-pencil and computerized forms of Line Orientation and Enhanced Cued Recall Tests.

PubMed

Aşkar, Petek; Altun, Arif; Cangöz, Banu; Cevik, Vildan; Kaya, Galip; Türksoy, Hasan

2012-04-01

The purpose of this study was to assess whether a computerized battery of neuropsychological tests could produce similar results as the conventional forms. Comparisons on 77 volunteer undergraduates were carried out with two neuropsychological tests: Line Orientation Test and Enhanced Cued Recall Test. Firstly, students were assigned randomly across the test medium (paper-and-pencil versus computerized). Secondly, the groups were given the same test in the other medium after a 30-day interval between tests. Results showed that the Enhanced Cued Recall Test-Computer-based did not correlate with the Enhanced Cued Recall Test-Paper-and-pencil results. Line Orientation Test-Computer-based scores, on the other hand, did correlate significantly with the Line Orientation Test-Paper-and-pencil version. In both tests, scores were higher on paper-and-pencil tests compared to computer-based tests. Total score difference between modalities was statistically significant for both Enhanced Cued Recall Tests and for the Line Orientation Test. In both computer-based tests, it took less time for participants to complete the tests.

Distributed proximity sensor system having embedded light emitters and detectors

NASA Technical Reports Server (NTRS)

Lee, Sukhan (Inventor)

1990-01-01

A distributed proximity sensor system is provided with multiple photosensitive devices and light emitters embedded on the surface of a robot hand or other moving member in a geometric pattern. By distributing sensors and emitters capable of detecting distances and angles to points on the surface of an object from known points in the geometric pattern, information is obtained for achieving noncontacting shape and distance perception, i.e., for automatic determination of the object's shape, direction and distance, as well as the orientation of the object relative to the robot hand or other moving member.

Making the invisible visible: a systematic review of sexual minority women's health in Southern Africa.

PubMed

Muller, Alexandra; Hughes, Tonda L

2016-04-11

Over the past two decades research on sexual and gender minority (lesbian, gay, bisexual and transgender; LGBT) health has highlighted substantial health disparities based on sexual orientation and gender identity in many parts of the world. We systematically reviewed the literature on sexual minority women's (SMW) health in Southern Africa, with the objective of identifying existing evidence and pointing out knowledge gaps around the health of this vulnerable group in this region. A systematic review of publications in English, French, Portuguese or German, indexed in PubMed or MEDLINE between the years 2000 and 2015, following PRISMA guidelines. Additional studies were identified by searching bibliographies of identified studies. Search terms included (Lesbian OR bisexual OR "women who have sex with women"), (HIV OR depression OR "substance use" OR "substance abuse" OR "mental health" OR suicide OR anxiety OR cancer), and geographical specification. All empirical studies that used quantitative or qualitative methods, which contributed to evidence for SMW's health in one, a few or all of the countries, were included. Theoretical and review articles were excluded. Data were extracted independently by 2 researchers using predefined data fields, which included a risk of bias/quality assessment. Of 315 hits, 9 articles were selected for review and a further 6 were identified through bibliography searches. Most studies were conducted with small sample sizes in South Africa and focused on sexual health. SMW included in the studies were racially and socio-economically heterogeneous. Studies focused predominately on young populations, and highlighted substance use and violence as key health issues for SMW in Southern Africa. Although there are large gaps in the literature, the review highlighted substantial sexual-orientation-related health disparities among women in Southern Africa. The findings have important implications for public health policy and research, highlighting the lack of population-level evidence on the one hand, and the impact of criminalizing laws around homosexuality on the other hand.

Medea genes, handedness and other traits

USGS Publications Warehouse

Hatfield, Jeffrey

2015-01-01

Medea factors or genes are maternal-effects mechanisms, found in many species, in which the mother's body selectively kills embryos of a certain genotype.Humans have a similar genetic mechanism, the gene RHD which produces Rh-factor involved in blood type.Recently I proposed that RHD acts as a maternal-effects gene that determines handedness (i.e., right handed or non-right handed) in individuals of our species. Here, I argue that RHD functions as a Medea gene as well.The handedness gene (and also RHD itself in some cases) has been implicated in autism spectrum disorders (ASD), bipolar disorder, cerebral laterality (i.e., right-brained or left-brained speech laterality), hair-whorl rotation, schizophrenia, sexual orientation, and speech dyslexia.Identifying the gene or genes that determine handedness or cerebral laterality may help uncover the mechanisms underlying these behavioral phenotypes in our species.A relatively simple test of the handedness hypothesis has been proposed:In a sample of humans for whom handedness has been evaluated, we would need to genotype for RHD by determining whether Rh+ individuals have one or two copies of the dominant allele. If RHD and perhaps also an interaction with RHCE are involved in sexual orientation, it explains how selection could favor a gene or genes which cause some people to become non-heterosexual.The literature on Medea genes provides the explanation:A Medea allele must increase in frequency, sometimes to fixation (i.e., 100% frequency) even if it reduces fecundity (e.g., birth rate).In addition, treatment for RHD maternal-fetal genotype incompatibility, which allows more fetuses to survive to term now, may be one explanation for why ASD appears to be increasing in frequency in some populations, if RHD is indeed the handedness gene, although many other mechanisms have also been suggested. One wonders if bipolar disorder and the other alternative phenotypes are also increasing in frequency.

Goal-oriented explicit residual-type error estimates in XFEM

NASA Astrophysics Data System (ADS)

Rüter, Marcus; Gerasimov, Tymofiy; Stein, Erwin

2013-08-01

A goal-oriented a posteriori error estimator is derived to control the error obtained while approximately evaluating a quantity of engineering interest, represented in terms of a given linear or nonlinear functional, using extended finite elements of Q1 type. The same approximation method is used to solve the dual problem as required for the a posteriori error analysis. It is shown that for both problems to be solved numerically the same singular enrichment functions can be used. The goal-oriented error estimator presented can be classified as explicit residual type, i.e. the residuals of the approximations are used directly to compute upper bounds on the error of the quantity of interest. This approach therefore extends the explicit residual-type error estimator for classical energy norm error control as recently presented in Gerasimov et al. (Int J Numer Meth Eng 90:1118-1155, 2012a). Without loss of generality, the a posteriori error estimator is applied to the model problem of linear elastic fracture mechanics. Thus, emphasis is placed on the fracture criterion, here the J-integral, as the chosen quantity of interest. Finally, various illustrative numerical examples are presented where, on the one hand, the error estimator is compared to its finite element counterpart and, on the other hand, improved enrichment functions, as introduced in Gerasimov et al. (2012b), are discussed.

Using object-oriented analysis techniques to support system testing

NASA Astrophysics Data System (ADS)

Zucconi, Lin

1990-03-01

Testing of real-time control systems can be greatly facilitated by use of object-oriented and structured analysis modeling techniques. This report describes a project where behavior, process and information models built for a real-time control system were used to augment and aid traditional system testing. The modeling techniques used were an adaptation of the Ward/Mellor method for real-time systems analysis and design (Ward85) for object-oriented development. The models were used to simulate system behavior by means of hand execution of the behavior or state model and the associated process (data and control flow) and information (data) models. The information model, which uses an extended entity-relationship modeling technique, is used to identify application domain objects and their attributes (instance variables). The behavioral model uses state-transition diagrams to describe the state-dependent behavior of the object. The process model uses a transformation schema to describe the operations performed on or by the object. Together, these models provide a means of analyzing and specifying a system in terms of the static and dynamic properties of the objects which it manipulates. The various models were used to simultaneously capture knowledge about both the objects in the application domain and the system implementation. Models were constructed, verified against the software as-built and validated through informal reviews with the developer. These models were then hand-executed.

Hazardous materials emergency response mobile robot

NASA Technical Reports Server (NTRS)

Stone, Henry W. (Inventor); Lloyd, James W. (Inventor); Alahuzos, George A. (Inventor)

1995-01-01

A simple or unsophisticated robot incapable of effecting straight-line motion at the end of its arm is presented. This robot inserts a key held in its end effector or hand into a door lock with nearly straight-line motion by gently thrusting its back heels downwardly so that it pivots forwardly on its front toes while holding its arm stationary. The relatively slight arc traveled by the robot's hand is compensated by a complaint tool with which the robot hand grips the door key. A visible beam is projected through the axis of the hand or gripper on the robot arm end at an angle to the general direction in which the robot thrusts the gripper forward. As the robot hand approaches a target surface, a video camera on the robot wrist watches the beam spot on the target surface fall from a height proportional to the distance between the robot hand and the target surface until the beam spot is nearly aligned with the top of the robot hand. Holes in the front face of the hand are connected through internal passages inside the arm to an on-board chemical sensor. Full rotation of the hand or gripper about the robot arm's wrist is made possible by slip rings in the wrist which permit passage of the gases taken in through the nose holes in the front of the hand through the wrist regardless of the rotational orientation of the wrist.

High- and Low-Temperature Deformation Behavior of Different Orientation Hot-Rolled Annealed Zircaloy-4

NASA Astrophysics Data System (ADS)

Zong, Yingying; Gen, Qingfeng; Jiang, Hongwei; Shan, Debin; Guo, Bin

2018-03-01

In this paper, the hot-rolled annealed Zircaloy-4 samples with different orientation were subjected to uniaxial compression with a strain rate of 0.001 s-1 to obtain the stress-strain curves of different initial orientation samples at different temperatures. Electron backscatter diffraction (EBSD) technique and transmission electron microscope (TEM) technique were used to analyze the microstructures and textures of compressed samples. The mechanical properties and microstructural evolution of rolling directions (RD), transverse directions (TD) and normal directions (ND) were investigated under the conditions of - 150 °C low temperature, room temperature and 200 °C high temperature (simulated lunar temperature environment). The results show that the strength of Zircaloy-4 decreases with the increase in deformation temperature, and the strength in three orientations is ND > TD > RD. The deformation mechanism of hot-rolled annealed Zircaloy-4 with different orientation is different. In RD, { 10\\bar{1}0} < {a} > prismatic slip has the highest Schmid factor (SF), so it is most easy to activate the slip, followed by TD orientation, and ND orientation is the most difficult to activate. The deformed grains abide slip→twinning→slip rule, and the different orientation Zircaloy-4 deformation mechanisms mainly are the twinning coordinated with the slip.

The Effect of Antibacterial Formula Hand Cleaners on the Elimination of Microbes on Hands

NASA Astrophysics Data System (ADS)

Coleman, J. R.

2002-05-01

: The purpose of this project is to find out which one of the antibacterial hand cleanser (antibacterial bar soap, antibacterial liquid hand soap, and liquid hand sanitizer) is more effective in eliminating microbes. If antibacterial- formula liquid hand soap is used on soiled hands, then it will be more effective in eliminating microbes. Germs are microorganisms that cause disease and can spread from person-to-person. Bacteria are a kind of microbe, an example of which is Transient Flora that is often found on hands. Hand washing prevents germs from spreading to others. During the procedure, swabs were used to take samples before and after the soiled hands had been washed with one of the antibacterial hand cleansers. Nutrient Easygel was poured into petri dishes to harden for 1 day, and then samples were swabbed on the gel. The Petri dishes were placed in an incubator for 24 hours, and then data was recorded accordingly. The antibacterial liquid hand soap was sufficient in eliminating the majority of bacteria. The hands had 65% of the bacteria on them, and after the liquid hand soap was used only 37% of the bacteria remained.

Enzyme activity assay of glycoprotein enzymes based on a boronate affinity molecularly imprinted 96-well microplate.

PubMed

Bi, Xiaodong; Liu, Zhen

2014-12-16

Enzyme activity assay is an important method in clinical diagnostics. However, conventional enzyme activity assay suffers from apparent interference from the sample matrix. Herein, we present a new format of enzyme activity assay that can effectively eliminate the effects of the sample matrix. The key is a 96-well microplate modified with molecularly imprinted polymer (MIP) prepared according to a newly proposed method called boronate affinity-based oriented surface imprinting. Alkaline phosphatase (ALP), a glycoprotein enzyme that has been routinely used as an indicator for several diseases in clinical tests, was taken as a representative target enzyme. The prepared MIP exhibited strong affinity toward the template enzyme (with a dissociation constant of 10(-10) M) as well as superb tolerance for interference. Thus, the enzyme molecules in a complicated sample matrix could be specifically captured and cleaned up for enzyme activity assay, which eliminated the interference from the sample matrix. On the other hand, because the boronate affinity MIP could well retain the enzymatic activity of glycoprotein enzymes, the enzyme captured by the MIP was directly used for activity assay. Thus, additional assay time and possible enzyme or activity loss due to an enzyme release step required by other methods were avoided. Assay of ALP in human serum was successfully demonstrated, suggesting a promising prospect of the proposed method in real-world applications.

Probe for high resolution NMR with sample reorientation

DOEpatents

Pines, A.; Samoson, A.

1990-02-06

An improved NMR probe and method are described which substantially improve the resolution of NMR measurements made on powdered or amorphous or otherwise orientationally disordered samples. The apparatus mechanically varies the orientation of the sample such that the time average of two or more sets of spherical harmonic functions are zero. 8 figs.

Calibrated work function mapping by Kelvin probe force microscopy

NASA Astrophysics Data System (ADS)

Fernández Garrillo, Pablo A.; Grévin, Benjamin; Chevalier, Nicolas; Borowik, Łukasz

2018-04-01

We propose and demonstrate the implementation of an alternative work function tip calibration procedure for Kelvin probe force microscopy under ultrahigh vacuum, using monocrystalline metallic materials with known crystallographic orientation as reference samples, instead of the often used highly oriented pyrolytic graphite calibration sample. The implementation of this protocol allows the acquisition of absolute and reproducible work function values, with an improved uncertainty with respect to unprepared highly oriented pyrolytic graphite-based protocols. The developed protocol allows the local investigation of absolute work function values over nanostructured samples and can be implemented in electronic structures and devices characterization as demonstrated over a nanostructured semiconductor sample presenting Al0.7Ga0.3As and GaAs layers with variable thickness. Additionally, using our protocol we find that the work function of annealed highly oriented pyrolytic graphite is equal to 4.6 ± 0.03 eV.

RELATIONSHIPS OF METALS IN FLOOR DUST AND ON THE HANDS OF TODDLERS

EPA Science Inventory

Toddlers are characterized by their frequent hand-to-mouth activity and exploratory behavior. This puts them at risk for exposure to environmental contaminants. Wipe samples are traditionally used to collect dust samples in homes. The assumption is that dust samples are indicativ...

An Evaluation of the Relationship among Urine, Air, and Hand Measures of Exposure to Bisphenol A (BPA) in US Manufacturing Workers.

PubMed

Hines, Cynthia J; Christianson, Annette L; Jackson, Matthew V; Ye, Xiaoyun; Pretty, Jack R; Arnold, James E; Calafat, Antonia M

2018-06-13

Exposure to bisphenol A (BPA) can be assessed using external and internal exposure measures. We examined the relationship between two measures of external BPA exposure (air and hand-wipe samples) and one of internal exposure (total BPA in urine) for a group of US manufacturing workers. During 2013-2014, we recruited 78 workers from six US companies that made BPA or made products with BPA. We quantified BPA in seven urine samples, two full-shift air samples and in pre- and end-shift hand-wipe samples collected from workers over 2 consecutive days. We examined correlations between creatinine-corrected urinary concentrations of total BPA (total BPACR) and BPA levels in air and hand wipes using Pearson's correlation coefficient. We also applied mixed-effects regression models to examine the relationship between total BPACR with BPA in air (urine~air model) and with BPA in end-shift hand wipes (urine~hand model), separately and together (urine~air+hand model), after adjusting for covariates. End-shift total BPACR strongly correlated with BPA in air (rp = 0.79, P < 0.0001) and nearly as strongly with BPA in end-shift hand wipes (rp = 0.75, P < 0.0001). In mixed-effect models, BPA air concentration and end-shift hand-wipe BPA level were significantly and positively associated with end-shift total BPACR (P < 0.0001 each). We found a significant effect of the Day 1 BPA air concentration on Day 2 total BPACR (P = 0.0104). When BPA air concentration and end-shift hand-wipe BPA level were in the same model, the air concentration (P < 0.0001) was more significant than the hand-wipe level (P = 0.0106). BPA levels in air and end-shift hand wipes strongly correlated with total BPACR, suggesting that both inhalation and dermal contract were likely exposure routes; however, inhalation, on average, appeared to be a more dominant exposure route than dermal contact for these manufacturing workers.

Ergonomic analysis of fastening vibration based on ISO Standard 5349 (2001).

PubMed

Joshi, Akul; Leu, Ming; Murray, Susan

2012-11-01

Hand-held power tools used for fastening operations exert high dynamic forces on the operator's hand-arm, potentially causing injuries to the operator in the long run. This paper presents a study that analyzed the vibrations exerted by two hand-held power tools used for fastening operations with the operating exhibiting different postures. The two pneumatic tools, a right-angled nut-runner and an offset pistol-grip, are used to install shearing-type fasteners. A tri-axial accelerometer is used to measure the tool's vibration. The position and orientation of the transducer mounted on the tool follows the ISO-5349 Standard. The measured vibration data is used to compare the two power tools at different operating postures. The data analysis determines the number of years required to reach a 10% probability of developing finger blanching. The results indicate that the pistol-grip tool induces more vibration in the hand-arm than the right-angled nut-runner and that the vibrations exerted on the hand-arm vary for different postures. Copyright © 2012 Elsevier Ltd and The Ergonomics Society. All rights reserved.

On the utility of 3D hand cursors to explore medical volume datasets with a touchless interface.

PubMed

Lopes, Daniel Simões; Parreira, Pedro Duarte de Figueiredo; Paulo, Soraia Figueiredo; Nunes, Vitor; Rego, Paulo Amaral; Neves, Manuel Cassiano; Rodrigues, Pedro Silva; Jorge, Joaquim Armando

2017-08-01

Analyzing medical volume datasets requires interactive visualization so that users can extract anatomo-physiological information in real-time. Conventional volume rendering systems rely on 2D input devices, such as mice and keyboards, which are known to hamper 3D analysis as users often struggle to obtain the desired orientation that is only achieved after several attempts. In this paper, we address which 3D analysis tools are better performed with 3D hand cursors operating on a touchless interface comparatively to a 2D input devices running on a conventional WIMP interface. The main goals of this paper are to explore the capabilities of (simple) hand gestures to facilitate sterile manipulation of 3D medical data on a touchless interface, without resorting on wearables, and to evaluate the surgical feasibility of the proposed interface next to senior surgeons (N=5) and interns (N=2). To this end, we developed a touchless interface controlled via hand gestures and body postures to rapidly rotate and position medical volume images in three-dimensions, where each hand acts as an interactive 3D cursor. User studies were conducted with laypeople, while informal evaluation sessions were carried with senior surgeons, radiologists and professional biomedical engineers. Results demonstrate its usability as the proposed touchless interface improves spatial awareness and a more fluent interaction with the 3D volume than with traditional 2D input devices, as it requires lesser number of attempts to achieve the desired orientation by avoiding the composition of several cumulative rotations, which is typically necessary in WIMP interfaces. However, tasks requiring precision such as clipping plane visualization and tagging are best performed with mouse-based systems due to noise, incorrect gestures detection and problems in skeleton tracking that need to be addressed before tests in real medical environments might be performed. Copyright © 2017 Elsevier Inc. All rights reserved.

Magnetic Remanence and Anisotropy of Magnetic Susceptibility of Dikes From Super-Fast Spread Crust Exposed At Pito Deep Rift

NASA Astrophysics Data System (ADS)

Horst, A.; Varga, R. J.; Gee, J. S.; Karson, J. A.

2006-12-01

The tectonic window at the Pito Deep Rift exposes super-fast spread (>140mm/yr) oceanic crust created at the East Pacific Rise (EPR). Observations and investigations of well-exposed cross sections into modern ocean crust, such as Pito Deep, provide essential insights into ridge crest dynamics. Paleomagnetic analysis provides a quantitative means for assessing both magnitude and style of structural rotations of oceanic crust. The Pito Cruise 2005 collected 69 fully oriented samples [67 dikes, 2 gabbros] during several ALVIN and JASON II dives. These samples were all oriented in situ using the Geocompass. Along the escarpment of Pito Deep, dike orientations have consistant NE strikes and SE dips. These dikes are all formed roughly 3 million years ago at the EPR located to the west of their present position. We determined magnetic remanence for a subset of 34 oriented blocks. A majority of dikes in this subset have normal polarity and many are clockwise rotated from expected orientations. To assess possible orientation errors during collection, we sampled multiple dikes from relatively small areas. On ALVIN dive 4081, for example, we collected 14 samples from a well-exposed, subparallel series of dikes. These dikes provide stable and consistently oriented remanence directions suggesting that errors in the collection process are small. Remanence data collected to date verify tectonic models that suggest clockwise rotation of the Easter microplate, consistent with current models. In addition to magnetic remanence, we determined the anisotropy of magnetic susceptibility (AMS) of the 34 dike samples. AMS studies have proven their utility in a wide range of geological studies and have been shown to determine flow direction within dikes in a variety of settings. In most Pito Deep samples, two of three AMS eigenvectors lie close to dike plane orientations. Kmin generally lies perpendicular to dike planes while, in most samples, Kmax is shallow indicating dominantly subhorizontal magma flow. Steep Kmax in a few samples indicates vertical flow directions suggestive of primary flow or of gravitational back-flow during the waning stages of dike injection. Primarily horizontal magma flow in dikes might indicate injection of magma from a centralized magma chamber toward a plate segment boundary.

Evaluation of oriented lysozyme immobilized with monoclonal antibody

NASA Astrophysics Data System (ADS)

Aoyagi, Satoka; Okada, Keigo; Shigyo, Ayako; Man, Naoki; Karen, Akiya

2008-12-01

The orientation of a lysozyme immobilized with a monoclonal antibody was evaluated based on determination of the uppermost surface structure using time-of-flight secondary ion mass spectrometry (TOF-SIMS). Specific peaks of the oriented lysozyme immobilized with monoclonal anti-lysozyme antibody were obtained in comparison with reference samples, non-oriented immobilized lysozyme and immobilized anti-lysozyme antibody. All samples were freeze-dried before TOF-SIMS measurement, and then each sample was measured using TOF-SIMS with a bismuth cluster ion source. TOF-SIMS spectra were analyzed to select peaks specific to the oriented immobilized lysozyme as well as to identify their chemical formula and ensemble of amino acids. The possible chemical formulae of the lysozyme fragments were then investigated with an element matching program and a residue matching program. The results from TOF-SIMS spectra analysis were compared to the amino acid sequence of the lysozyme and its three-dimensional structure registered in the protein data bank. Finally, the fragment-ion-generating regions of the oriented immobilized lysozyme were determined based on the suggested residues and the three-dimensional structure.

Trunk response and stability in standing under sagittal-symmetric pull-push forces at different orientations, elevations and magnitudes.

PubMed

El Ouaaid, Z; Shirazi-Adl, A; Plamondon, A

2018-03-21

To reduce lifting and associated low back injuries, manual material handling operations often involve pulling-pushing of carts at different weights, orientations, and heights. The loads on spine and risk of injury however need to be investigated. The aim of this study was to evaluate muscle forces, spinal loads and trunk stability in pull-push tasks in sagittal-symmetric, static upright standing posture. Three hand-held load magnitudes (80, 120 and 160 N) at four elevations (0, 20, 40 and 60 cm to the L5-S1) and 24 force directions covering all pull/push orientations were considered. For this purpose, a musculoskeletal finite element model with kinematics measured earlier were used. Results demonstrated that peak spinal forces occur under inclined pull (lift) at upper elevations but inclined push at the lowermost one. Minimal spinal loads, on the other hand, occurred at and around vertical pull directions. Overall, spinal forces closely followed variations in the net external moment of pull-push forces at the L5-S1. Local lumbar muscles were most active in pulls while global extensor muscles in lifts. The trunk stability margin decreased with load elevation except at and around horizontal push; it peaked under pulls and reached minimum at vertical lifts. It also increased with antagonist activity in muscles and intra-abdominal pressure. Results provide insight into the marked effects of variation in the load orientation and elevation on muscle forces, spinal loads and trunk stability and hence offer help in rehabilitation, performance enhancement training and design of safer workplaces. Copyright © 2017 Elsevier Ltd. All rights reserved.

Risk management in waste water treatment.

PubMed

Wagner, M; Strube, I

2005-01-01

With the continuous restructuring of the water market due to liberalisation, privatisation and internationalisation processes, the requirements on waste water disposal companies have grown. Increasing competition requires a target-oriented and clearly structured procedure. At the same time it is necessary to meet the environment-relevant legal requirements and to design the processes to be environment-oriented. The implementation of risk management and the integration of such a management instrument in an existing system in addition to the use of modern technologies and procedures can help to make the operation of the waste water treatment safer and consequently strengthen market position. The risk management process consists of three phases, risk identification, risk analysis/risk assessment and risk handling, which are based on each other, as well as of the risk managing. To achieve an identification of the risks as complete as possible, a subdivision of the kind of risks (e.g. legal, financial, market, operational) is suggested. One possibility to assess risks is the portfolio method which offers clear representation. It allows a division of the risks into classes showing which areas need handling. The determination of the appropriate measures to handle a risk (e.g. avoidance, reduction, shift) is included in the concluding third phase. Different strategies can be applied here. On the one hand, the cause-oriented strategy, aiming at preventive measures which aim to reduce the probability of occurrence of a risk (e.g. creation of redundancy, systems with low susceptibility to malfunction). On the other hand, the effect-oriented strategy, aiming to minimise the level of damage in case of an undesired occurrence (e.g. use of alarm systems, insurance cover).

Highway Maintenance Equipment Operator: Basic Core. Training Materials.

ERIC Educational Resources Information Center

Perky, Sandra Dutreau; And Others

This basic core curriculum is part of a three-part series of instructional guides designed for use in teaching a course in highway maintenance equipment operation. Addressed in the individual units of the curriculum, after an orientation unit, are safety; basic math; basic hand tools; procedures for loading. lashing, and unloading equipment;…

Hikers and other trail users

Treesearch

Robert C. Lucas

1971-01-01

Trail users seem neglected. Trail systems are limited, largely relics of fire control rather than designed for recreation; and total trail miles are probably declining. On the other hand, participation in various kinds of trail-oriented recreation is substantial and growing. Most activity is for short periods of time close to participants' homes. A varied and...

Play and Digital Media

ERIC Educational Resources Information Center

Johnson, James E.; Christie, James F.

2009-01-01

This article examines how play is affected by computers and digital toys. Research indicates that when computer software targeted at children is problem-solving oriented and open-ended, children tend to engage in creative play and interact with peers in a positive manner. On the other hand, drill-and-practice programs can be quite boring and limit…

Science Curriculum Guide. Grade 8. Bulletin 1989, No. 78.

ERIC Educational Resources Information Center

Alabama State Dept. of Education, Montgomery.

The purpose of this curriculum guide is to help teachers implement the Alabama Course of Study: Science. The major emphasis of the guide is to provide student-oriented, hands-on activities that engage students in "sciencing" behaviors. This guide has two major components, the table of contents and the activities. The table of contents…

Science Curriculum Guide. Kindergarten. Bulletin 1989, No. 70.

ERIC Educational Resources Information Center

Alabama State Dept. of Education, Montgomery.

The purpose of this curriculum guide is to help teachers implement the Alabama Course of Study: Science. The major emphasis of the guide is to provide student-oriented, hands-on activities that engage students in "sciencing" behaviors. This guide has two major components, the table of contents and the activities. The table of contents…

Students' Design of Experiments: An Inquiry Module on the Conduction of Heat

ERIC Educational Resources Information Center

Hatzikraniotis, E.; Kallery, M.; Molohidis, A.; Psillos, D.

2010-01-01

This article examines secondary students' design of experiments after engagement in an innovative and inquiry-oriented module on heat transfer. The module consists of an integration of hands-on experiments, simulated experiments and microscopic model simulations, includes a structured series of guided investigative tasks and was implemented for a…

Science Curriculum Guide. Grade 5. Bulletin 1989, No. 75.

ERIC Educational Resources Information Center

Alabama State Dept. of Education, Montgomery.

The purpose of this curriculum guide is to help teachers implement the Alabama Course of Study: Science. The major emphasis of the guide is to provide student-oriented, hands-on activities that engage students in "sciencing" behaviors. This guide has two major components, the table of contents and the activities. The table of contents…

Multi-Cultural Competency-Based Vocational Curricula. Fiberglass Technician. Multi-Cultural Competency-Based Vocational/Technical Curricula Series.

ERIC Educational Resources Information Center

Hepburn, Larry; Shin, Masako

This document, one of eight in a multi-cultural competency-based vocational/technical curricula series, is on fiberglass technician. This program covers 12 instructional areas: orientation, safety, introduction to fiberglass-reinforced plastics, hand lay-up, introduction to equipment operation, chopper operation, gel-coat equipment, finish and…

The Logic of History in "Gap" Discourse and Related Research

ERIC Educational Resources Information Center

Rudolph, Sophie

2016-01-01

The "Closing the Gap in Indigenous Disadvantage" policy emerged in 2008 following the National Apology to the Stolen Generations. The policy articulates one of its purposes as being to address historical injustices. On the other hand, policy reform is naturally oriented to the future in its aims to improve and develop. These temporal…

Teaching Physical Science through Children's Literature. 20 Complete Lessons for Elementary Grades.

ERIC Educational Resources Information Center

Gertz, Susan E.; Portman, Dwight J.; Sarquis, Mickey

This guide focuses on teaching hands-on, discovery-oriented physical science in the elementary classroom using children's literature. Each lesson is an integrated learning episode with a clearly defined science content objective which is supported and enriched through literature, writing, and mathematics. The three sections are: (1) "Properties of…

Instructional Support System--Occupational Education. Building Industries Occupations.

ERIC Educational Resources Information Center

Abramson, Theodore; And Others

The modules which make up the bulk of this report are the result of a two-week workshop at which thirteen building industries occupations teachers worked toward the development of a student outcome oriented curriculum. These modules are divided into the following occupational units: (1) carpentry (containing hand tools; portable power tools;…

Evaluation of an Audience Response System in Library Orientations for Engineering Students

ERIC Educational Resources Information Center

Brush, Denise A.

2010-01-01

While interactive hands-on instruction is usually considered the best approach for engineering students for both their academic courses and for library instruction, the size of the engineering student population compared to the number of instructors and the available classroom space means that engineering librarians, like engineering faculty, may…

Transforming an Introductory Linear Algebra Course with a TI-92 Hand-Held Computer.

ERIC Educational Resources Information Center

Quesada, Antonio R.

2003-01-01

Describes how the introduction of the TI-92 transformed a traditional first semester linear algebra course into a matrix-oriented course that emphasized conceptual understanding, relevant applications, and numerical issues. Indicates an increase in students' overall performance as they found the calculator very useful, believed it helped them…

Student manual, Book 2: Orientation to occupational safety compliance in DOE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Colley, D.L.

1993-10-01

This is a student hand-book an Occupational Safety Compliance in DOE. Topics include the following: Electrical; materials handling & storage; inspection responsibilities & procedures; general environmental controls; confined space entry; lockout/tagout; office safety, ergonomics & human factors; medical & first aid, access to records; construction safety; injury/illness reporting system; and accident investigation procedures.

The "Encounter" as an "Event of Truth" in Education: An Anthropological-Pedagogical Approach

ERIC Educational Resources Information Center

Pantazis, Vasileios E.

2012-01-01

In this essay, Vasileios Pantazis examines how two philosophers having different orientations acknowledge and study the phenomenon of the "encounter" ("Begegnung") and its fundamental importance to human life and education. On the one hand, Otto Friedrich Bollnow drew on existential philosophy and philosophical anthropology in his analysis of the…

Science Curriculum Guide. Grade 2. Bulletin 1989, No. 72.

ERIC Educational Resources Information Center

Alabama State Dept. of Education, Montgomery.

The purpose of this curriculum guide is to help teachers implement the Alabama Course of Study: Science. The major emphasis of the guide is to provide student-oriented, hands-on activities that engage students in "sciencing" behaviors. This guide has to major components, the table of contents and the activities. The table of contents…

Science Curriculum Guide. Grade 1. Bulletin 1989, No. 71.

ERIC Educational Resources Information Center

Alabama State Dept. of Education, Montgomery.

The purpose of this curriculum guide is to help teachers implement the Alabama Course of Study: Science. The major emphasis of the guide is to provide student-oriented, hands-on activities that engage students in "sciencing" behaviors. This guide has to major components, the table of contents and the activities. The table of contents…

Outreach: The Writing Center, the Campus, and the Community.

ERIC Educational Resources Information Center

Kinkead, Joyce

Making the process-oriented writing center an integral part of the community, as well as of the campus, can be crucial to ensuring its survival. Using students as tutors gives the center free tutoring and the students "hands on" experience. To reach students, the director can provide campus-wide publicity and attend meetings for…

The Impact of Learning Multiple Foreign Languages on Using Metacognitive Reading Strategies

ERIC Educational Resources Information Center

Razi, Salim

2008-01-01

This study aims primarily to investigate the impact of learning multiple foreign languages on the use of metacognitive reading strategies (MRSs) by foreign language teaching (FLT) department students. A number of factors such as gender, hand preference, class, and programme with reference to their belief orientation were also involved in the…

Standardized Curriculum for Machine Tool Operation/Machine Shop.

ERIC Educational Resources Information Center

Mississippi State Dept. of Education, Jackson. Office of Vocational, Technical and Adult Education.

Standardized vocational education course titles and core contents for two courses in Mississippi are provided: machine tool operation/machine shop I and II. The first course contains the following units: (1) orientation; (2) shop safety; (3) shop math; (4) measuring tools and instruments; (5) hand and bench tools; (6) blueprint reading; (7)…

38 CFR 21.140 - Evaluation and improvement of rehabilitation potential.

Code of Federal Regulations, 2010 CFR

2010-07-01

... reasonably feasible for a vocational goal or an independent living goal. (2) Provide a basis for planning: (i... improvement services are furnished on a full-time basis as a preliminary part of the period of rehabilitation... training, speech and voice correction, training in ambulation, and one-hand typewriting; (6) Orientation...

Science Curriculum Guide. Grade 3. Bulletin 1989, No. 73.

ERIC Educational Resources Information Center

Alabama State Dept. of Education, Montgomery.

The purpose of this curriculum guide is to help teachers implement the Alabama Course of Study: Science. The major emphasis of the guide is to provide student-oriented, hands-on activities that engage students in "sciencing" behaviors. This guide has two major components, the table of contents and the activities. The table of contents…

Training in the '80's: An Economic Perspective.

ERIC Educational Resources Information Center

Klein, Carl

During the last decade, the manufacture of commodities has become increasingly simple, and as a result, has increasingly been exported from the United States to low-wage regions of the world. On the other hand, the U.S. economy has become increasingly service oriented, with service-sector jobs growing rapidly while manufacturing jobs decline. In…

Three Ways to Be Happy: Pleasure, Engagement, and Meaning--Findings from Australian and US Samples

ERIC Educational Resources Information Center

Vella-Brodrick, Dianne A.; Park, Nansook; Peterson, Christopher

2009-01-01

This study examined the contributions of orientations to happiness (pleasure, engagement and meaning) to subjective well-being. A sample of 12,622 adults from the United States completed on-line surveys measuring orientations to happiness, positive affect, negative affect, and life satisfaction. A sample of 332 adults from Australia also completed…

Method and apparatus for measuring the NMR spectrum of an orientationally disordered sample

DOEpatents

Pines, Alexander; Samoson, Ago

1990-01-01

An improved NMR probe and method are described which substantially improve the resolution of NMR measurements made on powdered or amorphous or otherwise oreintationally disordered samples. The apparatus mechanically varies the orientation of the sample such that the time average of two or more sets of spherical harmonic functions is zero.

Robustness of the filamentation instability in arbitrarily oriented magnetic field: Full three dimensional calculation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bret, A., E-mail: antoineclaude.bret@uclm.es

2014-02-15

The filamentation (Weibel) instability plays a key role in the formation of collisionless shocks which are thought to produce Gamma-Ray-Bursts and High-Energy-Cosmic-Rays in astrophysical environments. While it has been known for long that a flow-aligned magnetic field can completely quench the instability, it was recently proved in 2D that in the cold regime, such cancelation is possible if and only if the field is perfectly aligned. Here, this result is finally extended to a 3D geometry. Calculations are conducted for symmetric and asymmetric counter-streaming relativistic plasma shells. 2D results are retrieved in 3D: the instability can never be completely canceledmore » for an oblique magnetic field. In addition, the maximum growth-rate is always larger for wave vectors lying in the plan defined by the flow and the oblique field. On the one hand, this bears consequences on the orientation of the generated filaments. On the other hand, it certifies 2D simulations of the problem can be performed without missing the most unstable filamentation modes.« less

Pegylation of Magnetically Oriented Lipid Bilayers

NASA Astrophysics Data System (ADS)

King, Valencia; Parker, Margaret; Howard, Kathleen P.

2000-01-01

We report NMR data for magnetically oriented phospholipid bilayers which have been doped with a lipid derivatized with a polyethylene glycol polymer headgroup to stabilize samples against aggregation. 13C, 31P, and 2H NMR data indicate that the incorporation of PEG2000-PE (1% molar to DMPC) does not interfere with the orientation properties of bicelles prepared at 25% w/v with or without the presence of lanthanide. Bicelles prepared at 10% w/v are also shown to orient when PEG2000-PE is added. The addition of PEG2000-PE to cholesterol-containing, lanthanide-flipped bicelles is shown to inhibit sample phase separation and improve spectral quality. Furthermore, the addition of PEG2000-PE to high w/v bicelles (40% w/v) is demonstrated to lead to an increase in overall sample order.

Differences in feminine and masculine characteristics in women as a function of handedness: support for the Geschwind/Galaburda theory of brain organization.

PubMed

Casey, M B; Nuttall, R L

1990-01-01

The Geschwind/Galaburda testosterone theory successfully predicted differences in feminine sex role identification and behavior between women with anomalous dominance and standard dominance. The women with anomalous dominance (consisting of left-handed and ambidextrous as well as right-handed women with first-degree non-right-handed relatives) were compared to women with standard dominance (right-handed women with all right-handed first-degree relatives) on the Bem Test of Sex Role Identity and a tomboy scale. Across three samples, handedness classifications were related to both tomboy characteristics and sex role identification. In addition, the study showed that the anomalous dominance women had a higher masculine sex role identification as compared to the college normative sample for the Bem, while the standard dominance women had a higher feminine identification than the normative sample.

Missing data in substance abuse research? Researchers’ reporting practices of sexual orientation and gender identity

PubMed Central

Bacca, Cristina L.; Cochran, Bryan N.

2014-01-01

Background Lesbian, gay, bisexual, and transgender individuals are at higher risk for substance use and substance use disorders than heterosexual individuals and are more likely to seek substance use treatment, yet sexual orientation and gender identity are frequently not reported in the research literature. The purpose of this study was to identify if sexual orientation and gender identity are being reported in the recent substance use literature, and if this has changed over time. Method The PsycINFO and PubMed databases were searched for articles released in 2007 and 2012 using the term “substance abuse” and 200 articles were randomly selected from each time period and database. Articles were coded for the presence or absence of sexual orientation and gender identity information. Results Participants’ sexual orientation was reported in 3.0% and 4.9% of the 2007 and 2.3% and 6.5% of the 2012 sample, in PsycINFO and PubMed sample articles, respectively, while non-binary gender identity was reported in 0% and 1.0% of the 2007 sample and 2.3% and 1.9% of the 2012 PsycINFO and PubMed sample articles. There were no differences in rates of reporting over time. Conclusions Sexual orientation and gender identity are rarely reported in the substance abuse literature, and there has not been a change in reporting practices between 2007 and 2012. Recommendations for future investigators in reporting sexual orientation and gender identity are included. PMID:25496705

Missing data in substance abuse research? Researchers' reporting practices of sexual orientation and gender identity.

PubMed

Flentje, Annesa; Bacca, Cristina L; Cochran, Bryan N

2015-02-01

Lesbian, gay, bisexual, and transgender individuals are at higher risk for substance use and substance use disorders than heterosexual individuals and are more likely to seek substance use treatment, yet sexual orientation and gender identity are frequently not reported in the research literature. The purpose of this study was to identify if sexual orientation and gender identity are being reported in the recent substance use literature, and if this has changed over time. The PsycINFO and PubMed databases were searched for articles released in 2007 and 2012 using the term "substance abuse" and 200 articles were randomly selected from each time period and database. Articles were coded for the presence or absence of sexual orientation and gender identity information. Participants' sexual orientation was reported in 3.0% and 4.9% of the 2007 and 2.3% and 6.5% of the 2012 sample, in PsycINFO and PubMed sample articles, respectively, while non-binary gender identity was reported in 0% and 1.0% of the 2007 sample and 2.3% and 1.9% of the 2012 PsycINFO and PubMed sample articles. There were no differences in rates of reporting over time. Sexual orientation and gender identity are rarely reported in the substance abuse literature, and there has not been a change in reporting practices between 2007 and 2012. Recommendations for future investigators in reporting sexual orientation and gender identity are included. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Influence of crystal orientation on the formation of femtosecond laser-induced periodic surface structures and lattice defects accumulation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sedao, Xxx; Garrelie, Florence, E-mail: florence.garrelie@univ-st-etienne.fr; Colombier, Jean-Philippe

2014-04-28

The influence of crystal orientation on the formation of femtosecond laser-induced periodic surface structures (LIPSS) has been investigated on a polycrystalline nickel sample. Electron Backscatter Diffraction characterization has been exploited to provide structural information within the laser spot on irradiated samples to determine the dependence of LIPSS formation and lattice defects (stacking faults, twins, dislocations) upon the crystal orientation. Significant differences are observed at low-to-medium number of laser pulses, outstandingly for (111)-oriented surface which favors lattice defects formation rather than LIPSS formation.

Brain activation associated with practiced left hand mirror writing.

PubMed

Kushnir, T; Arzouan, Y; Karni, A; Manor, D

2013-04-01

Mirror writing occurs in healthy children, in various pathologies and occasionally in healthy adults. There are only scant experimental data on the underlying brain processes. Eight, right-handed, healthy young adults were scanned (BOLD-fMRI) before and after practicing left-hand mirror-writing (lh-MW) over seven sessions. They wrote dictated words, using either the right hand with regularly oriented writing or lh-MW. An MRI compatible stylus-point recording system was used and online visual feedback was provided. Practice resulted in increased speed and readability of lh-MW but the number of movement segments was unchanged. Post-training signal increases occurred in visual, right lateral and medial premotor areas, and in right anterior and posterior peri-sylvian areas corresponding to language areas. These results suggest that lh-MW may constitute a latent ability that can be reinstated by a relatively brief practice experience. Concurrently, right hemisphere language processing areas may emerge, reflecting perhaps a reduction in trans-hemispheric suppression. Copyright © 2013 Elsevier Inc. All rights reserved.

Cultural influence on directional tendencies in children's drawing.

PubMed

Portex, Marine; Foulin, Jean-Noël; Troadec, Bertrand

2017-09-01

The present study was aimed at investigating how print experience as a cultural factor influences directional tendencies in children's drawing in the interplay with biomechanical (hand), syntactic (shape orientation) and semantic (shape meaning) factors. Eighty-eight right-handed children from three literacy/age groups (preliterate, first graders and third graders) had to copy a geometrical shape adapted from the Rey-Osterrieth complex figure. The shape was presented alternatively leftward and rightward, while using both dominant (right) and non-dominant (left) hands. Directional tendencies were assessed regarding directionality of drawing movements at global, intermediate and local levels and deviation error in centre line bisection. Results show a global improvement of drawing quality and strategies across groups and an advantage for the dominant right hand from 6 years onward. Regarding directional tendencies, a reinforcement of a congruency effect between conditions and writing direction was found from preliterates to third graders. These results are discussed as a cultural embodiment process and have implications for psychological testing.

The effect of the involvement of the dominant or non-dominant hand on grip/pinch strengths and the Levine score in patients with carpal tunnel syndrome.

PubMed

Zyluk, A; Walaszek, I

2012-06-01

The Levine questionnaire is a disease-oriented instrument developed for outcome measurement of carpal tunnel syndrome (CTS) management. The objective of this study was to compare Levine scores in patients with unilateral CTS, involving the dominant or non-dominant hand, before and after carpal tunnel release. Records of 144 patients, 126 women (87%) and 18 men (13%) aged a mean of 58 years with unilateral CTS, treated operatively, were analysed. The dominant hand was involved in 100 patients (69%), the non-dominant in 44 (31%). The parameters were analysed pre-operatively, and at 1 and 6 months post-operatively. A comparison of Levine scores in patients with the involvement of the dominant or non-dominant hand showed no statistically significant differences at baseline and any of the follow-up measurements. Statistically significant differences were noted in total grip strength at baseline and at 6 month assessments and in key-pinch strength at 1 and 6 months.

The Hadean to Paleoarchean geodynamo: microconglomerate tests from siliciclastic metasedimentary rocks from the Southern Cross Terrane of Western Australia

NASA Astrophysics Data System (ADS)

Cottrell, R. D.; Tarduno, J. A.; Bono, R. K.; Thern, E. R.; Chhibber, S. K.

2016-12-01

Detrital zircons found within metasedimentary rocks of the Yilgarn Craton (Western Austrlia) contain information about the early history of the geodynamo. Recently reported single crystal paleointensity (SCP) values obtained from zircon grains of the Jack Hills (JH) belt (Tarduno et al., 2015) suggest the presence of a core dynamo to times as old as 4.2 Ga. Magnetizations carried by zircons within these rocks have been preserved despite multiple reheating events of the host metasedimentary unit. Two positive conglomerate tests (Tarduno and Cottrell, 2013; Tarduno et al., 2015) as well as interlaboratory studies reproducing a prior positive conglomerate test (Dare et al., 2015; 2016) attest to the primary nature of the remanence carried by these zircons. Moreover, new Li data limit heating after zircon formation to < 500 oC. Similarly, the metasedimentary rocks of the Southern Cross Terrane, more than 400 kilometers away from the Discovery Site of the Jack Hills, contain detrital Eoarchean to Hadean age zircons (Nelson, 2005; Wyche, 2007). Following Tarduno et al. (2015), a micro-conglomerate test of oriented, small ( 500-700 mm) samples centered on single zircons ( 200-350 mm) was performed using the University of Rochester's ultra-high resolution 3-component DC SQUID magnetometer that affords an order of magnitude greater sensitivity than other high-resolution SQUID rock magnetometers. The characteristic remanences from oriented zircons (N=10; R=0.81) that unblock between 565 and 580 °C, consistent with a magnetite carrier, are well defined but together cannot be distinguished from those drawn from a random distribution (Ro=5.03) at the 95% confidence level; this indicates a positive microconglomerate test. Preliminary paleointensity determinations range between 4-27 μT. Additional studies of hand samples from the Southern Cross Terrane are underway.

Influence of grain size and texture prior to warm rolling on microstructure, texture and magnetic properties of Fe-6.5 wt% Si steel

NASA Astrophysics Data System (ADS)

Xu, H. J.; Xu, Y. B.; Jiao, H. T.; Cheng, S. F.; Misra, R. D. K.; Li, J. P.

2018-05-01

Fe-6.5 wt% Si steel hot bands with different initial grain size and texture were obtained through different annealing treatment. These bands were then warm rolled and annealed. An analysis on the evolution of microstructure and texture, particularly the formation of recrystallization texture was studied. The results indicated that initial grain size and texture had a significant effect on texture evolution and magnetic properties. Large initial grains led to coarse deformed grains with dense and long shear bands after warm rolling. Such long shear bands resulted in growth advantage for {1 1 3} 〈3 6 1〉 oriented grains during recrystallization. On the other hand, sharp {11 h} 〈1, 2, 1/h〉 (α∗-fiber) texture in the coarse-grained sample led to dominant {1 1 2} 〈1 1 0〉 texture after warm rolling. Such {1 1 2} 〈1 1 0〉 deformed grains provided massive nucleation sites for {1 1 3} 〈3 6 1〉 oriented grains during subsequent recrystallization. These {1 1 3} 〈3 6 1〉 grains were confirmed to exhibit an advantage on grain growth compared to γ-fiber grains. As a result, significant {1 1 3} 〈3 6 1〉 texture was developed and unfavorable γ-fiber texture was inhibited in the final annealed sheet. Both these aspects led to superior magnetic properties in the sample with largest initial grain size. The magnetic induction B8 was 1.36 T and the high frequency core loss P10/400 was 17.07 W/kg.

Hands-on Marine Geology and Geophysics Field Instruction at the University of Texas

NASA Astrophysics Data System (ADS)

Saustrup, S.; Gulick, S. P. S.; Goff, J. A.; Fernandez, R.; Davis, M. B.; Duncan, D.

2015-12-01

The University of Texas Institute for Geophysics, part of the Jackson School of Geosciences, annually offers an intensive three-week marine geology and geophysics field course during the spring-summer intersession. Now in its ninth year, the course provides instruction in survey design, data acquisition, processing, interpretation, and visualization. Methods covered include seismic reflection, multibeam bathymetry, sidescan sonar, and sediment sampling. The emphasis of the course is team-oriented, hands-on, field training in real-world situations. The course begins with classroom instruction covering the field area and field methods, followed by a week of at-sea field work in 4-student teams. The students then return to the classroom where they integrate, interpret, and visualize data using industry-standard software. The teams present results in a series of professional-level final presentations before academic and industry supporters. Our rotating field areas provide ideal locations for students to investigate coastal and sedimentary processes of the Gulf Coast and continental shelf . In the field, student teams rotate between two research vessels: the smaller vessel, the Jackson School's newly-commissioned R/V Scott Petty (26 feet LOA), is used principally for multibeam bathymetry, sidescan sonar, and sediment sampling; the other, NOAA's R/V Manta (82 feet LOA) is used for high-resolution seismic reflection, CHIRP sub-bottom profiling, multibeam bathymetry, gravity coring, and vibracoring. Teams also rotate through a field laboratory performing processing of geophysical data and sediment samples. This past year's course in Freeport, Texas proceeded unabated despite concurrent record-breaking rainfall and flooding, which offered students a unique opportunity to observe and image, in real time, flood-related bedform migration on a time scale of hours. The data also allowed an in-class opportunity to examine natural and anthropogenic processes recorded in the river and coastal morphology and stratigraphy. http://www.ig.utexas.edu/research/mgg/courses/geof348K/

Comparison of Pore-Network and Lattice Boltzmann Models for Pore-Scale Modeling of Geological Storage of CO2 in Natural Reservoir Rocks

NASA Astrophysics Data System (ADS)

Kohanpur, A. H.; Chen, Y.; Valocchi, A. J.; Tudek, J.; Crandall, D.

2016-12-01

CO2-brine flow in deep natural rocks is the focus of attention in geological storage of CO2. Understanding rock/flow properties at pore-scale is a vital component in field-scale modeling and prediction of fate of injected CO2. There are many challenges in working at the pore scale, such as size and selection of representative elementary volume (REV), particularly for material with complex geometry and heterogeneity, and the high computational costs. These issues factor into trade-offs that need to be made in choosing and applying pore-scale models. On one hand, pore-network modeling (PNM) simplifies the geometry and flow equations but can provide characteristic curves on fairly large samples. On the other hand, the lattice Boltzmann method (LBM) solves Navier-Stokes equations on the real geometry but is limited to small samples due to its high computational costs. Thus, both methods have some advantages but also face some challenges, which warrants a more detailed comparison and evaluation. In this study, we used industrial and micro-CT scans of actual reservoir rock samples to characterize pore structure at different resolutions. We ran LBM models directly on the characterized geometry and PNM on the equivalent 3D extracted network to determine single/two-phase flow properties during drainage and imbibition processes. Specifically, connectivity, absolute permeability, relative permeability curve, capillary pressure curve, and interface location are compared between models. We also did simulations on several subsamples from different locations including different domain sizes and orientations to encompass analysis of heterogeneity and isotropy. This work is primarily supported as part of the Center for Geologic Storage of CO2, an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science and partially supported by the International Institute for Carbon-Neutral Energy Research (WPI-I2CNER) based at Kyushu University, Japan.

Hand preference for writing and associations with selected demographic and behavioral variables in 255,100 subjects: the BBC internet study.

PubMed

Peters, Michael; Reimers, Stian; Manning, John T

2006-11-01

In an Internet study unrelated to handedness, 134,317 female and 120,783 male participants answered a graded question as to which hand they preferred for writing. This allowed determination of hand preference patterns across 7 ethnic groups. Sex differences in left-handedness were found in 4 ethnic groups, favoring males, while no significant sex differences were found in three of the groups. Prevalence of left-handedness in the largest of the ethnic groups (self-labelled as "White") was comparable to contemporary hand preference data for this group [Gilbert, A. N., & Wysocki, C. J. (1992). Hand preference and age in the United states. Neuropsychologia, 30, 601-608] but the prevalence of left-handedness in individuals >70 years of age was considerably higher in the present study. Individuals who indicated "either" hand for writing preference had significantly lower spatial performance (mental rotation task) and significantly higher prevalence of hyperactivity, dyslexia, asthma than individuals who had clear left or right hand preferences, in support of Crow et al. [Crow, T., Crow, L., Done, D., & Leask, S. (1998). Relative hand skill predicts academic ability: global deficits at the point of hemispheric indecision. Neuropsychologia, 36, 1275-1282]. Similarly, an association of writing hand preference and non-heterosexual orientation was clearest for individuals with "either" writing hand responses. We conclude that contradictions in the literature as to whether or not these variables are linked to handedness stem largely from different definitions of hand preference. Due to a lack of statistical power in most studies in the literature, the "either" hand writing preference group that yielded the most salient results in this study is not normally available for analysis.

Head-motion-controlled video goggles: preliminary concept for an interactive laparoscopic image display (i-LID).

PubMed

Aidlen, Jeremy T; Glick, Sara; Silverman, Kenneth; Silverman, Harvey F; Luks, Francois I

2009-08-01

Light-weight, low-profile, and high-resolution head-mounted displays (HMDs) now allow personalized viewing, of a laparoscopic image. The advantages include unobstructed viewing, regardless of position at the operating table, and the possibility to customize the image (i.e., enhanced reality, picture-in-picture, etc.). The bright image display allows use in daylight surroundings and the low profile of the HMD provides adequate peripheral vision. Theoretic disadvantages include reliance for all on the same image capture and anticues (i.e., reality disconnect) when the projected image remains static, despite changes in head position. This can lead to discomfort and even nausea. We have developed a prototype of interactive laparoscopic image display that allows hands-free control of the displayed image by changes in spatial orientation of the operator's head. The prototype consists of an HMD, a spatial orientation device, and computer software to enable hands-free panning and zooming of a video-endoscopic image display. The spatial orientation device uses magnetic fields created by a transmitter and receiver, each containing three orthogonal coils. The transmitter coils are efficiently driven, using USB power only, by a newly developed circuit, each at a unique frequency. The HMD-mounted receiver system links to a commercially available PC-interface PCI-bus sound card (M-Audiocard Delta 44; Avid Technology, Tewksbury, MA). Analog signals at the receiver are filtered, amplified, and converted to digital signals, which are processed to control the image display. The prototype uses a proprietary static fish-eye lens and software for the distortion-free reconstitution of any portion of the captured image. Left-right and up-down motions of the head (and HMD) produce real-time panning of the displayed image. Motion of the head toward, or away from, the transmitter causes real-time zooming in or out, respectively, of the displayed image. This prototype of the interactive HMD allows hands-free, intuitive control of the laparoscopic field, independent of the captured image.

An investigation of constraint-based component-modeling for knowledge representation in computer-aided conceptual design

NASA Technical Reports Server (NTRS)

Kolb, Mark A.

1990-01-01

Originally, computer programs for engineering design focused on detailed geometric design. Later, computer programs for algorithmically performing the preliminary design of specific well-defined classes of objects became commonplace. However, due to the need for extreme flexibility, it appears unlikely that conventional programming techniques will prove fruitful in developing computer aids for engineering conceptual design. The use of symbolic processing techniques, such as object-oriented programming and constraint propagation, facilitate such flexibility. Object-oriented programming allows programs to be organized around the objects and behavior to be simulated, rather than around fixed sequences of function- and subroutine-calls. Constraint propagation allows declarative statements to be understood as designating multi-directional mathematical relationships among all the variables of an equation, rather than as unidirectional assignments to the variable on the left-hand side of the equation, as in conventional computer programs. The research has concentrated on applying these two techniques to the development of a general-purpose computer aid for engineering conceptual design. Object-oriented programming techniques are utilized to implement a user-extensible database of design components. The mathematical relationships which model both geometry and physics of these components are managed via constraint propagation. In addition, to this component-based hierarchy, special-purpose data structures are provided for describing component interactions and supporting state-dependent parameters. In order to investigate the utility of this approach, a number of sample design problems from the field of aerospace engineering were implemented using the prototype design tool, Rubber Airplane. The additional level of organizational structure obtained by representing design knowledge in terms of components is observed to provide greater convenience to the program user, and to result in a database of engineering information which is easier both to maintain and to extend.

Rotationally invariant clustering of diffusion MRI data using spherical harmonics

NASA Astrophysics Data System (ADS)

Liptrot, Matthew; Lauze, François

2016-03-01

We present a simple approach to the voxelwise classification of brain tissue acquired with diffusion weighted MRI (DWI). The approach leverages the power of spherical harmonics to summarise the diffusion information, sampled at many points over a sphere, using only a handful of coefficients. We use simple features that are invariant to the rotation of the highly orientational diffusion data. This provides a way to directly classify voxels whose diffusion characteristics are similar yet whose primary diffusion orientations differ. Subsequent application of machine-learning to the spherical harmonic coefficients therefore may permit classification of DWI voxels according to their inferred underlying fibre properties, whilst ignoring the specifics of orientation. After smoothing apparent diffusion coefficients volumes, we apply a spherical harmonic transform, which models the multi-directional diffusion data as a collection of spherical basis functions. We use the derived coefficients as voxelwise feature vectors for classification. Using a simple Gaussian mixture model, we examined the classification performance for a range of sub-classes (3-20). The results were compared against existing alternatives for tissue classification e.g. fractional anisotropy (FA) or the standard model used by Camino.1 The approach was implemented on both two publicly-available datasets: an ex-vivo pig brain and in-vivo human brain from the Human Connectome Project (HCP). We have demonstrated how a robust classification of DWI data can be performed without the need for a model reconstruction step. This avoids the potential confounds and uncertainty that such models may impose, and has the benefit of being computable directly from the DWI volumes. As such, the method could prove useful in subsequent pre-processing stages, such as model fitting, where it could inform about individual voxel complexities and improve model parameter choice.

Preferred crystallographic orientation in the ice I ← II transformation and the flow of ice II

USGS Publications Warehouse

Bennett, K.; Wenk, H.-R.; Durham, W.B.; Stern, L.A.; Kirby, S.H.

1997-01-01

The preferred crystallographic orientation developed during the ice I ← II transformation and during the plastic flow of ice II was measured in polycrystalline deuterium oxide (D2O) specimens using low-temperature neutron diffraction. Samples partially transformed from ice I to II under a non-hydrostatic stress developed a preferred crystallographic orientation in the ice II. Samples of pure ice II transformed from ice I under a hydrostatic stress and then when compressed axially, developed a strong preferred orientation of compression axes parallel to (1010). A match to the observed preferred orientation using the viscoplastic self-consistent theory was obtained only when (1010) [0001] was taken as the predominant slip system in ice II.

Do Right- and Left-Handed Monkeys Differ on Cognitive Measures?

NASA Technical Reports Server (NTRS)

Hopkins, William D.; Washburn, David A.

1994-01-01

Twelve left- and 14 right-handed monkeys were compared on 6 measures of cognitive performance (2 maze-solving tasks, matching-to-sample, delayed matching-to-sample, delayed response using spatial cues, and delayed response using form cues). The dependent variable was trials-to-training criterion for each of the 6 tasks. Significant differences were found between left- and right-handed monkeys on the 2 versions of the delayed response task. Right-handed monkeys reached criterion significantly faster on the form cue version of the task, whereas left-handed monkeys reached criterion significantly faster on delayed response for spatial position (p less than .05). The results suggest that sensitive hand preference measures of laterality can reveal differences in cognitive performance, which in turn may reflect underlying laterality in functional organization of the nervous system.

Commercial Ethyl Glucuronide (EtG) and Ethyl Sulfate (EtS) Testing is Not Vulnerable to Incidental Alcohol Exposure in Pregnant Women.

PubMed

Ondersma, Steven J; Beatty, Jessica R; Rosano, Thomas G; Strickler, Ronald C; Graham, Amy E; Sokol, Robert J

2016-01-02

Ethyl Glucoronide (EtG) and Ethyl Sulfate (EtS) have shown promise as biomarkers for alcohol and may be sensitive enough for use with pregnant women in whom even low-level alcohol use is important. However, there have been reports of over-sensitivity of EtG and EtS to incidental exposure to sources such as alcohol-based hand sanitizer. Further, few studies have evaluated these biomarkers among pregnant women, in whom the dynamics of these metabolites may differ. This study evaluated whether commercial EtG-EtS testing was vulnerable to high levels of environmental exposure to alcohol in pregnant women. Two separate samples of five nurses-one pregnant and the other postpartum, all of whom reported high levels of alcohol-based hand sanitizer use-provided urine samples before and 4-8 hours after rinsing with alcohol-based mouthwash and using hand sanitizer. The five pregnant nurses provided urine samples before, during, and after an 8-hour nursing shift, during which they repeatedly cleansed with alcohol-based hand sanitizer (mean 33.8 uses). The five postpartum nurses used hand sanitizer repeatedly between baseline and follow-up urine samples. No urine samples were positive for EtG-EtS at baseline or follow-up, despite use of mouthwash and-in the pregnant sample-heavy use of hand sanitizer (mean of 33.8 uses) throughout the 8-hour shift. Current, commercially available EtG-EtS testing does not appear vulnerable to even heavy exposure to incidental sources of alcohol among pregnant and postpartum women.

Hand preference and skilled hand performance among individuals with successful rightward conversions of the writing hand.

PubMed

Porac, Clare

2009-03-01

Searleman and Porac (2001) studied lateral preference patterns among successfully switched left-hand writers, left-hand writers with no switch pressure history, and left-hand writers who did not switch when pressured. They concluded that left-handers who successfully shift to right-hand writing are following an inherent right-sided lateralisation pattern that they already possess. Searleman and Porac suggested that the neural mechanisms that control lateralisation in the successfully switched individuals are systematically different from those of other groups of left-handers. I examined patterns of skilled and less-skilled hand preference and skilled hand performance in a sample of 394 adults (ages 18-94 years). The sample contained successfully switched left-hand writers, left-handers pressured to shift who remained left-hand writers, left-handers who did not experience shift pressures, and right-handers. Both skilled hand preference and skilled hand performance were shifted towards the right side in successfully switched left-hand writers. This group also displayed mixed patterns of hand preference and skilled hand performance in that they were not as right-sided as "natural" right-handers nor were they as left-sided as the two left-hand writing groups, which did not differ from each other. The experience of being pressured to switch to right-hand writing was not sufficient to shift lateralisation patterns; the pressures must be experienced in the context of an underlying neural control mechanism that is amenable to change as a result of these external influences.

Impact of After Visit Summaries on Patient Return Rates at an Acupuncture and Oriental Medicine Clinic

PubMed Central

Carter, Sarah Uma; Watanabe, Mika

2014-01-01

Abstract Objective: To determine whether an after visit summary (AVS) provided to patients at the conclusion of their first acupuncture treatments affects the number of times patients return for follow-up treatments, a retrospective cohort study was performed. Materials and Methods: Two random samples of 100 new patient records (N=200) at the Oregon College of Oriental Medicine's (OCOM) outpatient clinics in Portland, OR, were reviewed over a 3-month period before and after the implementation of using the AVS. Patients who had been seen previously at any of the college clinics were excluded. The number of return visits recorded in the MediSoft™ database was hand counted for each patient. Results: The use of an AVS did not significantly change the mean number of return visits for acupuncture (2-sided p-value=0.91), but there was a trend toward more frequent returns by patients who received AVS, compared to those who did not (2-sided p-value=0.0827, relative risk [RR]: 1.51, confidence interval [CI] 0.95–2.41). Conclusions: These data support the concept that the AVS has a positive influence on patient return rates. In this study, patients who received an AVS were 51% more likely to return for 5 visits than patients who did not receive an AVS. PMID:25184014

Auditory orienting of attention: Effects of cues and verbal workload with children and adults.

PubMed

Phélip, Marion; Donnot, Julien; Vauclair, Jacques

2016-01-01

The use of tone cues has an improving effect on the auditory orienting of attention for children as for adults. Verbal cues, on the contrary, do not seem to orient attention as efficiently before the age of 9 years. However, several studies have reported inconsistent effects of orienting attention on ear asymmetries. Multiple factors are questioned, such as the role of verbal workload. Indeed, the semantic nature of the dichotic pairs and their load of processing may explain orienting of attention performance. Thus, by controlling for the role of verbal workload, the present experiment aimed to evaluate the development of capacities for the auditory orienting of attention. Right-handed, 6- to 12-year-olds and adults were recruited to complete either a tone cue or a verbal cue dichotic listening task in the identification of familiar words or nonsense words. A factorial design analysis of variance showed a significant right-ear advantage for all the participants and for all the types of stimuli. A major developmental effect was observed in which verbal cues played an important role: they allowed the 6- to 8-year-olds to improve their performance of identification in the left ear. These effects were taken as evidence of the implication of top-down processes in cognitive flexibility across development.

The effects of lesions of the superior colliculus on locomotor orientation and the orienting reflex in the rat.

PubMed

Goodale, M A; Murison, R C

1975-05-02

The effects of bilateral removal of the superior colliculus or visual cortex on visually guided locomotor movements in rats performing a brightness discrimination task were investigated directly with the use of cine film. Rats with collicular lesions showed patterns of locomotion comparable to or more efficient than those of normal animals when approaching one of 5 small doors located at one end of a large open area. In contrast, animals with large but incomplete lesions of visual cortex were distinctly impaired in their visual control of approach responses to the same stimuli. On the other hand, rats with collicular damage showed no orienting reflex or evidence of distraction in the same task when novel visual or auditory stimuli were presented. However, both normal and visual-decorticate rats showed various components of the orienting reflex and disturbance in task performance when the same novel stimuli were presented. These results suggest that although the superior colliculus does not appear to be essential to the visual control of locomotor orientation, this midbrain structure might participate in the mediation of shifts in visual fixation and attention. Visual cortex, while contributing to visuospatial guidance of locomotor movements, might not play a significant role in the control and integration of the orienting reflex.

Microstructural effects on damage evolution in shocked copper polycrystals

DOE PAGES

Lieberman, Evan J.; Lebensohn, Ricardo A.; Menasche, David B.; ...

2016-07-01

Three-dimensional crystal orientation fields of a copper sample, characterized before and after shock loading using High Energy Diffraction Microscopy, are used for input and validation of direct numerical simulations using a Fast Fourier Transform (FFT)-based micromechanical model. The locations of the voids determined by X-ray tomography in the incipiently-spalled sample, predominantly found near grain boundaries, were traced back and registered to the pre-shocked microstructural image. Using FFT-based simulations with direct input from the initial microstructure, micromechanical fields at the shock peak stress were obtained. Statistical distributions of micromechanical fields restricted to grain boundaries that developed voids after the shock aremore » compared with corresponding distributions for all grain boundaries. Distributions of conventional measures of stress and strain (deviatoric and mean components) do not show correlation with the locations of voids in the post-shocked image. Neither does stress triaxiality, surface traction or grain boundary inclination angle, in a significant way. On the other hand, differences in Taylor factor and accumulated plastic work across grain boundaries do correlate with the occurrence of damage. As a result, damage was observed to take place preferentially at grain boundaries adjacent to grains having very different plastic response.« less

TEMTADS Adjunct Sensor Systems Hand-held EMI Sensor for Cued UXO Discrimination (ESTCP MR-200807) and Man-Portable EMI Array for UXO Detection and Discrimination (ESTCP MR-200909) Cost and Performance Report

DTIC Science & Technology

2012-06-27

notes and team orienteering functions. Data collection with the MP system at the former Camp Beale, CA is shown in Figure 5- 2 (right). 5.3.3...Naval Research Laboratory Washington, DC 20375-5320 NRL/MR/ 6110 --12-9424 TEMTADS Adjunct Sensor Systems Hand-held EMI Sensor for Cued UXO...CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 2 . REPORT TYPE1. REPORT DATE (DD

The effect of grain orientation on nanoindentation behavior of model austenitic alloy Fe-20Cr-25Ni

DOE PAGES

Chen, Tianyi; Tan, Lizhen; Lu, Zizhe; ...

2017-07-26

Instrumented nanoindentation was used in this paper to investigate the hardness, elastic modulus, and creep behavior of an austenitic Fe-20Cr-25Ni model alloy at room temperature, with the indented grain orientation being the variant. The samples indented close to the {111} surfaces exhibited the highest hardness and modulus. However, nanoindentation creep tests showed the greatest tendency for creep in the {111} indented samples, compared with the samples indented close to the {001} and {101} surfaces. Scanning electron microscopy and cross-sectional transmission electron microscopy revealed slip bands and dislocations in all samples. The slip band patterns on the indented surfaces were influencedmore » by the grain orientations. Deformation twinning was observed only under the {001} indented surfaces. Finally, microstructural analysis and molecular dynamics modeling correlated the anisotropic nanoindentation-creep behavior with the different dislocation substructures formed during indentation, which resulted from the dislocation reactions of certain active slip systems that are determined by the indented grain orientations.« less

Digital-image processing and image analysis of glacier ice

USGS Publications Warehouse

Fitzpatrick, Joan J.

2013-01-01

This document provides a methodology for extracting grain statistics from 8-bit color and grayscale images of thin sections of glacier ice—a subset of physical properties measurements typically performed on ice cores. This type of analysis is most commonly used to characterize the evolution of ice-crystal size, shape, and intercrystalline spatial relations within a large body of ice sampled by deep ice-coring projects from which paleoclimate records will be developed. However, such information is equally useful for investigating the stress state and physical responses of ice to stresses within a glacier. The methods of analysis presented here go hand-in-hand with the analysis of ice fabrics (aggregate crystal orientations) and, when combined with fabric analysis, provide a powerful method for investigating the dynamic recrystallization and deformation behaviors of bodies of ice in motion. The procedures described in this document compose a step-by-step handbook for a specific image acquisition and data reduction system built in support of U.S. Geological Survey ice analysis projects, but the general methodology can be used with any combination of image processing and analysis software. The specific approaches in this document use the FoveaPro 4 plug-in toolset to Adobe Photoshop CS5 Extended but it can be carried out equally well, though somewhat less conveniently, with software such as the image processing toolbox in MATLAB, Image-Pro Plus, or ImageJ.

Performance evaluation of a six-axis generalized force-reflecting teleoperator

NASA Technical Reports Server (NTRS)

Hannaford, B.; Wood, L.; Guggisberg, B.; Mcaffee, D.; Zak, H.

1989-01-01

Work in real-time distributed computation and control has culminated in a prototype force-reflecting telemanipulation system having a dissimilar master (cable-driven, force-reflecting hand controller) and a slave (PUMA 560 robot with custom controller), an extremely high sampling rate (1000 Hz), and a low loop computation delay (5 msec). In a series of experiments with this system and five trained test operators covering over 100 hours of teleoperation, performance was measured in a series of generic and application-driven tasks with and without force feedback, and with control shared between teleoperation and local sensor referenced control. Measurements defining task performance included 100-Hz recording of six-axis force/torque information from the slave manipulator wrist, task completion time, and visual observation of predefined task errors. The task consisted of high precision peg-in-hole insertion, electrical connectors, velcro attach-de-attach, and a twist-lock multi-pin connector. Each task was repeated three times under several operating conditions: normal bilateral telemanipulation, forward position control without force feedback, and shared control. In shared control, orientation was locally servo controlled to comply with applied torques, while translation was under operator control. All performance measures improved as capability was added along a spectrum of capabilities ranging from pure position control through force-reflecting teleoperation and shared control. Performance was optimal for the bare-handed operator.

Sexual Orientation and Borderline Personality Disorder Features in a Community Sample of Adolescents.

PubMed

Reuter, Tyson R; Sharp, Carla; Kalpakci, Allison H; Choi, Hye J; Temple, Jeff R

2016-10-01

Empirical literature demonstrates that sexual minorities are at an increased risk of developing psychopathology, including borderline personality disorder (BPD). The specific link between sexual orientation and BPD has received significantly less attention in youth, and it remains unclear what drives this relation. Given that there are higher rates of psychopathology in both sexual minorities and individuals with BPD, the present study aimed to determine if sexual orientation uniquely contributes to borderline personality pathology, controlling for other psychopathology. An ethnically diverse sample of 835 adolescents completed self-report measures of borderline features, depression, anxiety, and sexual orientation. Sexual minorities scored higher on borderline features compared to heterosexual adolescents. When controlling for depression and anxiety, sexual orientation remained significantly associated with borderline features. The relation between sexual orientation and BPD cannot fully be explained by other psychopathology. Future research is necessary to understand potential mechanisms underlying this relation.

Impacts of fiber orientation and milling on observed crystallinity in jack pine

Treesearch

Umesh P. Agarwal; Sally A. Ralph; Richard S. Reiner; Roderquita K. Moore; Carlos Baez

2014-01-01

Influences of fiber orientation and milling on wood cellulose crystallinity were studied using jack pine wood. The fiber orientation effects were measured by sampling rectangular wood blocks in radial, tangential, and cross-sectional orientations. The influence of milling was studied by analyzing the unsieved and sieved milled wood fractions (all

Exploring the Educational Benefits of Introducing Aspect-Oriented Programming Into a Programming Course

ERIC Educational Resources Information Center

Boticki, I.; Katic, M.; Martin,S.

2013-01-01

This paper explores the educational benefits of introducing the aspect-oriented programming paradigm into a programming course in a study on a sample of 75 undergraduate software engineering students. It discusses how using the aspect-oriented paradigm, in addition to the object-oriented programming paradigm, affects students' programs, their exam…

The Effects of Purpose Orientations on Recent High School Graduates' College Application Decisions

ERIC Educational Resources Information Center

Sharma, Gitima; Kim, Jungnam; Bryan, Julia

2017-01-01

Using the 2002 Educational Longitudinal Study database, the authors examined the different types of purpose orientations amongst a nationally representative sample of adolescents and the effect of these purpose orientations on high school graduates' college application decisions. Results indicated four types of purpose orientations: career,…

Engineering behaviour change in an epidemic: the epistemology of NIH-funded HIV prevention science.

PubMed

Green, Adam; Kolar, Kat

2015-05-01

Social scientific and public health literature on National Institutes of Health-funded HIV behavioural prevention science often assumes that this body of work has a strong biomedical epistemological orientation. We explore this assumption by conducting a systematic content analysis of all NIH-funded HIV behavioural prevention grants for men who have sex with men between 1989 and 2012. We find that while intervention research strongly favours a biomedical orientation, research into the antecedents of HIV risk practices favours a sociological, interpretive and structural orientation. Thus, with respect to NIH-funded HIV prevention science, there exists a major disjunct in the guiding epistemological orientations of how scientists understand HIV risk, on the one hand, and how they engineer behaviour change in behavioural interventions, on the other. Building on the extant literature, we suggest that the cause of this disjunct is probably attributable not to an NIH-wide positivist orientation, but to the specific standards of evidence used to adjudicate HIV intervention grant awards, including randomised controlled trials and other quantitative measures of intervention efficacy. © 2015 The Authors. Sociology of Health & Illness © 2015 Foundation for the Sociology of Health & Illness/John Wiley & Sons Ltd.

Strategic Orientation in the Globalization of Software Firms

NASA Astrophysics Data System (ADS)

Dedrick, Jason; Kraemer, Kenneth L.; Carmel, Erran; Dunkle, Debora

In the search for profits, software firms are globalizing their development activities. Some firms achieve greater profits by becoming more efficient, whereas others do so by reaching new markets; some do both. This paper creates an a priori typology of strategies based on the extent to which firms are focused on operational improvement or market access, have a dual focus or are unfocused. We find that firms with these strategies differ in degree of internationalization, organization of offshoring and performance outcomes related to offshoring. Market-oriented firms receive a greater proportion of their total revenue from sales outside the U.S., showing a greater international orientation. They keep more of their offshore development in-house via captive operations. They also are most likely to report increased non-U.S. sales as a result of offshoring. On the other hand, operations-oriented firms have lower levels of international sales, are more likely to go offshore via outsourced software development, and achieve greater costs savings and labor force flexibility as a result of offshoring. Operations-oriented firms also face more obstacles in offshoring, perhaps because of their reliance on outsourcing. Dual focus firms generally achieve some of the best of both strategies, whereas unfocused firms achieve lower cost benefits.

Growth and Crystal Orientation of ZnTe on m-Plane Sapphire with Nanofaceted Structure

NASA Astrophysics Data System (ADS)

Nakasu, Taizo; Sun, Wei-Che; Kobayashi, Masakazu; Asahi, Toshiaki

2017-04-01

ZnTe thin films on sapphire substrate with nanofaceted structure have been studied. The nanofaceted structure of the m-plane (10-10) sapphire was obtained by heating the substrate at above 1100°C in air, and the r-plane (10-12) and S-plane (1-101) were confirmed. ZnTe layers were prepared on the nanofaceted m-plane sapphire substrates by molecular beam epitaxy (MBE). The effect of the nanofaceted structure on the orientation of the thin films was examined based on x-ray diffraction (XRD) pole figures. Transmission electron microscopy (TEM) was also employed to characterize the interface structures. The ZnTe layer on the nanofaceted m-plane sapphire substrate exhibited (331)-plane orientation, compared with (211)-plane without the nanofaceted structure. After thermal treatment, the m-plane surface vanished and (211) layer could not be formed because of the lack of surface lattice matching. On the other hand, (331)-plane thin film was formed on the nanofaceted m-plane sapphire substrate, since the (111) ZnTe domains were oriented on the S-facet. The orientation of the ZnTe epilayer depended on the atomic ordering on the surface and the influence of the S-plane.

Alcohol-free instant hand sanitizer reduces elementary school illness absenteeism.

PubMed

Dyer, D L; Shinder, A; Shinder, F

2000-10-01

BACKGROUND AND HYPOTHESES: A substantial percentage of school absenteeism among children is related to transmissible infection. Rates of transmission can be reduced by hand washing with soap and water, but such washing occurs infrequently. This study tested whether an alcohol-free instant hand sanitizer (CleanHands) could reduce illness absenteeism in school-age children. A 10-week, open-label, crossover study was performed on 420 elementary school-age children (ages 5-12). Students were given a brief orientation immediately prior to the start of the study on the relationship of germs, illness, and hand washing. Each student in the treatment group then received the test product in individual bottles, with instructions to apply one to two sprays to the hands after coming into the classroom, before eating, and after using the restroom, in addition to their normal hand washing with soap and water. The control group was instructed to continue hand washing as normal with non-medicated soap. After 4 weeks of treatment and a 2-week wash-out period, the control and experimental groups were reversed. Data gathered on absenteeism were classified as gastrointestinal or respiratory related and normalized for nonillness-related absenteeism and school holidays. Compared to the hand washing-only control group, students using CleanHands were found to have 41.9% fewer illness-related absence days, representing a 28.9% and a 49.7% drop in gastrointestinal- and respiratory-related illnesses, respectively. Likewise, absence incidence decreased by 31.7%, consisting of a 44.2% and 50.2% decrease in incidence of gastrointestinal- and respiratory-related illnesses, respectively. No adverse events were reported during the study. Daily use of the instant hand sanitizer was associated with significantly lower rates of illness-related absenteeism.

Monitoring Indoor Exposure to Organophosphate Flame Retardants: Hand Wipes and House Dust

PubMed Central

Hoffman, Kate; Garantziotis, Stavros; Birnbaum, Linda S.

2014-01-01

Background: Organophosphate flame retardants (PFRs) are becoming popular replacements for the phased-out polybrominated diphenyl ether (PBDE) mixtures, and they are now commonly detected in indoor environments. However, little is known about human exposure to PFRs because they cannot be easily measured in blood or serum. Objectives: To investigate relationships between the home environment and internal exposure, we assessed associations between two PFRs, tris(1,3-dichloropropyl) phosphate (TDCIPP) and triphenyl phosphate (TPHP), in paired hand wipe and dust samples and concentrations of their metabolites in urine samples (n = 53). We also assessed short-term variation in urinary metabolite concentrations (n = 11 participants; n = 49 samples). Methods: Adult volunteers in North Carolina, USA, completed questionnaires and provided urine, hand wipe, and household dust samples. PFRs and PBDEs were measured in hand wipes and dust, and bis(1,3-dichloropropyl) phosphate (BDCIPP) and diphenyl phosphate (DPHP), metabolites of TDCIPP and TPHP, were measured in urine. Results: TDCIPP and TPHP were detected frequently in hand wipes and dust (> 86.8%), with geometric mean concentrations exceeding those of PBDEs. Unlike PBDEs, dust TDCIPP and TPHP levels were not associated with hand wipes. However, hand wipe levels were associated with urinary metabolites. Participants with the highest hand wipe TPHP mass, for instance, had DPHP levels 2.42 times those of participants with the lowest levels (95% CI: 1.23, 4.77). Women had higher levels of DPHP, but not BDCIPP. BDCIPP and DPHP concentrations were moderately to strongly reliable over 5 consecutive days (intraclass correlation coefficients of 0.81 and 0.51, respectively). Conclusions: PFR exposures are widespread, and hand-to-mouth contact or dermal absorption may be important pathways of exposure. Citation: Hoffman K, Garantziotis S, Birnbaum LS, Stapleton HM. 2015. Monitoring indoor exposure to organophosphate flame retardants: hand wipes and house dust. Environ Health Perspect 123:160–165; http://dx.doi.org/10.1289/ehp.1408669 PMID:25343780

Functional consequences of experience-dependent plasticity on tactile perception following perceptual learning.

PubMed

Trzcinski, Natalie K; Gomez-Ramirez, Manuel; Hsiao, Steven S

2016-09-01

Continuous training enhances perceptual discrimination and promotes neural changes in areas encoding the experienced stimuli. This type of experience-dependent plasticity has been demonstrated in several sensory and motor systems. Particularly, non-human primates trained to detect consecutive tactile bar indentations across multiple digits showed expanded excitatory receptive fields (RFs) in somatosensory cortex. However, the perceptual implications of these anatomical changes remain undetermined. Here, we trained human participants for 9 days on a tactile task that promoted expansion of multi-digit RFs. Participants were required to detect consecutive indentations of bar stimuli spanning multiple digits. Throughout the training regime we tracked participants' discrimination thresholds on spatial (grating orientation) and temporal tasks on the trained and untrained hands in separate sessions. We hypothesized that training on the multi-digit task would decrease perceptual thresholds on tasks that require stimulus processing across multiple digits, while also increasing thresholds on tasks requiring discrimination on single digits. We observed an increase in orientation thresholds on a single digit. Importantly, this effect was selective for the stimulus orientation and hand used during multi-digit training. We also found that temporal acuity between digits improved across trained digits, suggesting that discriminating the temporal order of multi-digit stimuli can transfer to temporal discrimination of other tactile stimuli. These results suggest that experience-dependent plasticity following perceptual learning improves and interferes with tactile abilities in manners predictive of the task and stimulus features used during training. © 2016 Federation of European Neuroscience Societies and John Wiley & Sons Ltd.

Functional consequences of experience-dependent plasticity on tactile perception following perceptual learning

PubMed Central

Trzcinski, Natalie K; Gomez-Ramirez, Manuel; Hsiao, Steven S.

2016-01-01

Continuous training enhances perceptual discrimination and promotes neural changes in areas encoding the experienced stimuli. This type of experience-dependent plasticity has been demonstrated in several sensory and motor systems. Particularly, non-human primates trained to detect consecutive tactile bar indentations across multiple digits showed expanded excitatory receptive fields (RFs) in somatosensory cortex. However, the perceptual implications of these anatomical changes remain undetermined. Here, we trained human participants for nine days on a tactile task that promoted expansion of multi-digit RFs. Participants were required to detect consecutive indentations of bar stimuli spanning multiple digits. Throughout the training regime we tracked participants’ discrimination thresholds on spatial (grating orientation) and temporal tasks on the trained and untrained hands in separate sessions. We hypothesized that training on the multi-digit task would decrease perceptual thresholds on tasks that require stimulus processing across multiple digits, while also increasing thresholds on tasks requiring discrimination on single digits. We observed an increase in orientation thresholds on a single-digit. Importantly, this effect was selective for the stimulus orientation and hand used during multi-digit training. We also found that temporal acuity between digits improved across trained digits, suggesting that discriminating the temporal order of multi-digit stimuli can transfer to temporal discrimination of other tactile stimuli. These results suggest that experience-dependent plasticity following perceptual learning improves and interferes with tactile abilities in manners predictive of the task and stimulus features used during training. PMID:27422224

Environmental Studies Center Teacher Books. 1st Grade - Habitats.

ERIC Educational Resources Information Center

Martin County Schools, Jensen Beach, FL. Environmental Studies Center.

This teacher's guide, one of nine teacher packages developed for use in the sequential, hands-on, field-oriented, K-8 environmental education program of the Martin County Schools in Florida, was developed for use with elementary children in grade one prior to and after a visit to an environmental studies center located near an estuarine area. This…

Fingers Make a Comeback in Math

ERIC Educational Resources Information Center

Brooks, Andree

1978-01-01

Describes a new idea in finger-counting developed by 31 year old Hang Young Pai, a Korean teacher living in New York. It is called Chisanbop and it comes from a more advanced hand-calculation system used in the Orient in conjunction with the abacus. It is applicable for both elementary students and for more advanced mathematical applications, such…

Teaching with Procedural Variation: A Chinese Way of Promoting Deep Understanding of Mathematics

ERIC Educational Resources Information Center

Lai, Mun Yee; Murray, Sara

2012-01-01

In mathematics education, there has been tension between deep learning and repetitive learning. Western educators often emphasize the need for students to construct a conceptual understanding of mathematical symbols and rules before they practise the rules (Li, 2006). On the other hand, Chinese learners tend to be oriented towards rote learning…

iVirtualWorld: A Domain-Oriented End-User Development Environment for Building 3D Virtual Chemistry Experiments

ERIC Educational Resources Information Center

Zhong, Ying

2013-01-01

Virtual worlds are well-suited for building virtual laboratories for educational purposes to complement hands-on physical laboratories. However, educators may face technical challenges because developing virtual worlds requires skills in programming and 3D design. Current virtual world building tools are developed for users who have programming…

Variations of In-Service Training for Primary Mathematics Teachers: An Empirical Study

ERIC Educational Resources Information Center

Selter, Christoph; Gräsel, Cornelia; Reinold, Martin; Trempler, Kati

2015-01-01

Previous findings indicate that the effectiveness of in-service teacher training can be increased by a (pedagogical) content knowledge orientation on the one hand and the stimulation of cooperation among teachers on the other. In this paper, three versions of a multi-phase training program were compared in a quasi-experimental field study with a…

Good, Better, Best: Using Universal Design and Digital Technology to Develop Great Products

ERIC Educational Resources Information Center

Tauke, Beth; Story, Mary Follette; Ostroff, Elaine

2004-01-01

Industrial design and technology are lab-based disciplines with highly visual products, hands-on activities, and frequent interactions between faculty and students. As a result, the ways that online resources are used in these courses tend to be different from other subject areas with more lecture-oriented modes of learning. This article addresses…

Functional Transcranial Doppler Sonography and a Spatial Orientation Paradigm Identify the Non-Dominant Hemisphere

ERIC Educational Resources Information Center

Dorst, J.; Haag, A.; Knake, S.; Oertel, W. H.; Hamer, H. M.; Rosenow, F.

2008-01-01

Rationale: Functional transcranial Doppler sonography (fTCD) during word generation is well established for language lateralization. In this study, we evaluated a fTCD paradigm to reliably identify the non-dominant hemisphere. Methods: Twenty-nine right-handed healthy subjects (27.1 [plus or minus] 7.6 years) performed the "cube perspective test"…

A Career Guidance Institute Forms in the Greater Albuquerque (New Mexico) Chamber of Commerce, the Private Industry Council, and the Albuquerque Public Schools.

ERIC Educational Resources Information Center

Gonzalez, Rossana

1983-01-01

The Career Guidance Institute is designed to orient public high school students to the world of work. The program profiles various occupations with in-depth observation, hands-on opportunities, and possible temporary employment, enabling students to make intelligent educational and career choices. (SK)

Cycles for Science: Biology Curriculum Supplement for Grades 9-12. A Steel Cycles Program.

ERIC Educational Resources Information Center

Rogers, Diana; Laymon, Carol

This document contains project-oriented lessons and hands-on activities developed to integrate steel recycling, natural resource conservation, and solid waster management into science learning. It is designed to assist secondary teachers and students (grades 9-12) in meeting state and local goals for learning in biology, chemistry, general science…

hm Science Study Skills Program: People, Energy, and Appropriate Technology. Teacher's Guide.

ERIC Educational Resources Information Center

Wilson, Carol; Krasnow, Gary

This program includes 14 activity-oriented units which integrate instruction in science study skills with hands-on learning about energy and appropriate technology. The program is suitable for use in a wide range of science curricula in grades 7 to 10. Units focus on such topics as the meaning of the word "appropriate," what makes…

77 FR 75918 - VA Health Professional Scholarship and Visual Impairment and Orientation and Mobility...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-26

...: Written comments may be submitted: By mail or hand-delivery to Director, Regulations Management (02REG... a participant may continue to attend school under the standards and practices of the school at which... Affairs health care facility and a school of medicine or osteopathy.'' We propose to amend this definition...

Environmental Studies Center Teacher Books. 6th Grade - River Investigation.

ERIC Educational Resources Information Center

Martin County Schools, Jensen Beach, FL. Environmental Studies Center.

This teacher's guide, one of nine teacher packages developed for use in the sequential, hands-on, field-oriented, K-8 environmental education program of the Martin County Schools in Florida, was developed for use with elementary children in grade six prior to and after a visit to an environmental studies center located near an estuarine area. The…

Returns on Vocational Education over the Life Cycle: Between Immediate Labour Market Preparation and Lifelong Employability

ERIC Educational Resources Information Center

Lavrijsen, Jeroen; Nicaise, Ides

2017-01-01

An important issue in the design of secondary-level education is the balance between conveying general and occupation-specific (vocational) skills. On the one hand, vocationally oriented programmes, providing occupation-specific skills with immediate labour market relevance, have repeatedly been shown to secure safe pathways into employment. On…

Embracing Learners' Ideas about Diffusion and Osmosis: A Coupled-Inquiry Approach

ERIC Educational Resources Information Center

Sweeney, Ryan M.; Martin-Hansen, Lisa; Verma, Geeta; Dunkhase, John

2009-01-01

Learning about osmosis and diffusion is often a challenging task for middle school students. Here the authors present a lesson that was converted from a "cookbook" lab (McLaughlin and Thompson 2007) into a more inquiry-oriented lab that uses inquiry teaching strategies and hands-on investigations to teach middle-grade students about osmosis and…

Task-Oriented Access to Data Files: An Evaluation.

ERIC Educational Resources Information Center

Watters, Carolyn; And Others

1994-01-01

Discussion of information retrieval highlights DalText, a prototype information retrieval system that provides access to nonindexed textual data files where the mode of access is determined by the user based on the task at hand. A user study is described that was conducted at Dalhousie University (Nova Scotia) to test DalText. (Contains 23…

Environmental Studies Center Teacher Books. 4th Grade - Mangrove Communities.

ERIC Educational Resources Information Center

Martin County Schools, Jensen Beach, FL. Environmental Studies Center.

This teacher's guide, one of nine teacher packages developed for use in the sequential, hands-on, field-oriented, K-8 environmental education program of the Martin County Schools in Florida, was developed for use with elementary children in grade four prior to and after a visit to an environmental studies center located near an estuarine area. The…

The Economics and Financing of Urban Schools: Toward a Productive, Solution-Oriented Discourse

ERIC Educational Resources Information Center

Crampton, Faith E.

2010-01-01

Across the nation, a surprising number of both critics and advocates of urban schools demonstrate a naivete about the limits and possibilities of funding in relationship to the academic success of urban students. On one hand, critics often argue, without solid evidence or informed analysis, that urban school districts have sufficient funds to…

Evaluation of feedforward and feedback contributions to hand stiffness and variability in multijoint arm control.

PubMed

He, Xin; Du, Yu-Fan; Lan, Ning

2013-07-01

The purpose of this study is to validate a neuromechanical model of the virtual arm (VA) by comparing emerging behaviors of the model to those of experimental observations. Hand stiffness of the VA model was obtained by either theoretical computation or simulated perturbations. Variability in hand position of the VA was generated by adding signal dependent noise (SDN) to the motoneuron pools of muscles. Reflex circuits of Ia, Ib and Renshaw cells were included to regulate the motoneuron pool outputs. Evaluation of hand stiffness and variability was conducted in simulations with and without afferent feedback under different patterns of muscle activations during postural maintenance. The simulated hand stiffness and variability ellipses captured the experimentally observed features in shape, magnitude and orientation. Steady state afferent feedback contributed significantly to the increase in hand stiffness by 35.75±16.99% in area, 18.37±7.80% and 16.15±7.15% in major and minor axes; and to the reduction of hand variability by 49.41±21.19% in area, 36.89±12.78% and 18.87±23.32% in major and minor axes. The VA model reproduced the neuromechanical behaviors that were consistent with experimental data, and it could be a useful tool for study of neural control of posture and movement, as well as for application to rehabilitation.

Motor skill changes and neurophysiologic adaptation to recovery-oriented virtual rehabilitation of hand function in a person with subacute stroke: a case study

PubMed Central

Fluet, Gerard G.; Patel, Jigna; Qiu, Qinyin; Yarossi, Matthew; Massood, Supriya; Adamovich, Sergei V.; Tunik, Eugene; Merians, Alma S.

2016-01-01

Purpose The complexity of upper extremity (UE) behavior requires recovery of near normal neuromuscular function to minimize residual disability following a stroke. This requirement places a premium on spontaneous recovery and neuroplastic adaptation to rehabilitation by the lesioned hemisphere. Motor skill learning is frequently cited as a requirement for neuroplasticity. Studies examining the links between training, motor learning, neuroplasticity, and improvements in hand motor function are indicated. Methods This case study describes a patient with slow recovering hand and finger movement (Total Upper Extremity Fugl–Meyer examination score = 25/66, Wrist and Hand items = 2/24 on poststroke day 37) following a stroke. The patient received an intensive eight-session intervention utilizing simulated activities that focused on the recovery of finger extension, finger individuation, and pinch-grasp force modulation. Results Over the eight sessions, the patient demonstrated improvements on untrained transfer tasks, which suggest that motor learning had occurred, as well a dramatic increase in hand function and corresponding expansion of the cortical motor map area representing several key muscles of the paretic hand. Recovery of hand function and motor map expansion continued after discharge through the three-month retention testing. Conclusion This case study describes a neuroplasticity based intervention for UE hemiparesis and a model for examining the relationship between training, motor skill acquisition, neuroplasticity, and motor function changes. PMID:27669997

Mental rotation of letters, body parts and scenes during whole-body tilt: role of a body-centered versus a gravitational reference frame.

PubMed

Bock, Otmar L; Dalecki, Marc

2015-04-01

It is known that in mental-rotation tasks, subjects mentally transform the displayed material until it appears "upright" and then make a judgment. Here we evaluate, by using three typical mental rotation tasks with different degrees of embodiment, whether "upright" is coded to a gravitational or egocentric reference frame, or a combination of both. Observers stood erect or were whole-body tilted by 60°, with their left ear down. In either posture, they saw stimuli presented at different orientation angles in their frontal plane: in condition LETTER, they judged whether the stimuli were normal or mirror-reversed letters, in condition HAND whether they represented a left or a right hand, and in condition SCENE whether a weapon laid left or right in front of a displayed person. Data confirm that reaction times are modulated by stimulus orientation angle, and the modulation curve in LETTER and HAND differs from that in SCENE. More importantly, during 60° body tilt, the modulation curve shifted 12° away from the gravitational towards the egocentric vertical reference; this shift was comparable in all three conditions and independent of the degree of embodiment. We conclude that mental rotation in all conditions relied on a similar spatial reference, which seems to be a weighted average of the gravitational and the egocentric vertical, with a higher weight given to the former. Copyright © 2015 Elsevier B.V. All rights reserved.

When is success not satisfying? Integrating regulatory focus and approach/avoidance motivation theories to explain the relation between core self-evaluation and job satisfaction.

PubMed

Ferris, D Lance; Johnson, Russell E; Rosen, Christopher C; Djurdjevic, Emilija; Chang, Chu-Hsiang Daisy; Tan, James A

2013-03-01

Integrating implications from regulatory focus and approach/avoidance motivation theories, we present a framework wherein motivational orientations toward positive (approach motivation orientation) or negative (avoidance motivation orientation) stimuli interact with workplace success to mediate the relation of core self-evaluation (CSE) with job satisfaction. Using data collected from supervisor-subordinate dyads (Sample 1) and time-lagged data (Sample 2), we found that the results from two studies indicated that the interaction of workplace success and avoidance motivation orientation mediated relations of CSE with job satisfaction. Although approach motivation orientation did not interact with workplace success, it did mediate the CSE-job satisfaction relation on its own. Implications for the CSE and approach/avoidance literatures are discussed.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miao, Yinbin; Mo, Kun; Yao, Tiankai

Here coordinated experimental efforts to quantitatively correlate crystallographic orientation and surface faceting features in UO2 are reported upon. A sintered polycrystalline UO2 sample was thermally etched to induce the formation of surface faceting features. Synchrotron Laue microdiffraction was used to obtain a precise crystallographic orientation map for the UO2 surface grains. Scanning electron microscopy (SEM) was utilized to collect the detailed information on the surface morphology of the sample. The surface faceting features were found to be highly dependent on the crystallographic orientation. In most cases, Triple-plane structures containing one {100} plane and two {111} planes were found to dominatemore » the surface of UO2. The orientation-faceting relationship established in this study revealed a practical and efficient method of determining crystallographic orientation based on the surface features captured by SEM images.« less

Responses to Orientation Discontinuities in V1 and V2: Physiological Dissociations and Functional Implications

PubMed Central

Purpura, Keith P.; Victor, Jonathan D.

2014-01-01

Segmenting the visual image into objects is a crucial stage of visual processing. Object boundaries are typically associated with differences in luminance, but discontinuities in texture also play an important role. We showed previously that a subpopulation of neurons in V2 in anesthetized macaques responds to orientation discontinuities parallel to their receptive field orientation. Such single-cell responses could be a neurophysiological correlate of texture boundary detection. Neurons in V1, on the other hand, are known to have contextual response modulations such as iso-orientation surround suppression, which also produce responses to orientation discontinuities. Here, we use pseudorandom multiregion grating stimuli of two frame durations (20 and 40 ms) to probe and compare texture boundary responses in V1 and V2 in anesthetized macaque monkeys. In V1, responses to texture boundaries were observed for only the 40 ms frame duration and were independent of the orientation of the texture boundary. However, in transient V2 neurons, responses to such texture boundaries were robust for both frame durations and were stronger for boundaries parallel to the neuron's preferred orientation. The dependence of these processes on stimulus duration and orientation indicates that responses to texture boundaries in V2 arise independently of contextual modulations in V1. In addition, because the responses in transient V2 neurons are sensitive to the orientation of the texture boundary but those of V1 neurons are not, we suggest that V2 responses are the correlate of texture boundary detection, whereas contextual modulation in V1 serves other purposes, possibly related to orientation “pop-out.” PMID:24599456

Microstructures and Crystallographic Misorientation in Experimentally Deformed Natural Quartz Single Crystals

NASA Astrophysics Data System (ADS)

Thust, Anja; Heilbronner, Renée.; Stünitz, Holger

2010-05-01

Samples of natural milky quartz were deformed in a Griggs deformation apparatus at different confining pressures (700 MPa, 1000 MPa, 1500 MPa), with constant displacement rates of 1 * 10-6s-1, axial strains of 3 - 19%, and at a temperature of 900° C. The single crystal starting material contains a large number of H2O-rich fluid inclusions. Directly adjacent to the fluid inclusions the crystal is essentially dry (50-150H/106Si, determined by FTIR). The samples were cored from a narrow zone of constant 'milkyness' (i.e. same density of fluid inclusions) in a large single crystal in two different orientations (1) normal to one of the prism planes (⊥{m} orientation) and (2) 45° to and to (O+ orientation).During attaining of the experimental P and T conditions, numerous fluid inclusions decrepitate by cracking. Rapid crack healing produces regions of very small fluid inclusions ('wet' quartz domains). Only these regions are subsequently deformed by dislocation glide, dry quartz domains without cracking and decrepitation of fluid inclusions remain undeformed. Sample strain is not sufficient to cause recrystallization, so that deformation is restricted to dislocation glide. In experiments at lower temperatures (800, 700° C) or at lower strain rate (10-5s-1) there is abundant cracking and semi-brittle deformation, indicating that 900° C, (10-6s-1) represents the lower temperature end of crystal plastic deformation in these single crystals. Peak strengths (at 900° C) range between 150 and 250 MPa for most samples of both orientations. There is a trend of decreasing strength with increasing confining pressure, as described by Kronenberg and Tullis (1984) for quartzites, but the large variation in strength due to inhomogeneous sample strain precludes a definite analysis of the strength/pressure dependence in our single crystals. In the deformed samples, we can distinguish a number of microstructures and inferred different slip systems. In both orientations, deformation lamellae with a high optical relief appear in the usual sub-basal orientation; often they are associated with 'fluid inclusions trails', cracks or en echelon arrays. In ⊥{m} orientation, conjugate misorientation bands sub-parallel to the prism planes can be observed. The barreled shape of the samples can be explained by prism glide. Unfortunately, since prism glide does not affect the c-axis orientation it cannot be recognized on a c-axis orientation image. Nevertheless, changes in the c-axis orientation are observed locally, indicating either the activity of an additional slip system or a different deformation process (not specified yet). In O+ orientation, we observe the formation of internally kinked shear bands. They are up to 100 μm wide and oriented at α 90° w/r to the host c-axis, slightly oblique to the sense of shear. The width of the kinked domains is 20-40 μm and the average misorientation (β) is 5° . The dispersion of c-axis orientation with synthetic rotation of the c-axis is evidence of basal glide. References: Kronenberg, A.K. & Tullis, J. (1984): Flow strength of quartz aggregates: grain size and pressure effects due to hydrolytic weakening. JGR Vol. 89, 4281-4281.

Rice cooker steam hand burn in the pediatric patient.

PubMed

Roh, T S; Kim, Y S; Burm, J S; Chung, C H; Kim, J B; Oh, S J

2000-07-01

Burn injuries often lead to significant cosmetic and functional deformity. In the Orient, household electric rice cookers have caused a significant number of steam burns to infant hands. The clinical course and treatment outcome of these burns have been studied retrospectively in a review of the medical records of 79 pediatric patients treated for acute hand steam burns and of 38 other patients who underwent correction for postburn contracture. Electric rice cookers caused all of the acute pediatric steam burns treated at our institute. Of the 81 hands treated between 1995 and 1998, 38.3 percent healed with conservative treatment and 61.7 percent required skin grafting. The volar aspects of the index and middle fingers were those most frequently involved. Eighteen of 36 hands (50 percent) grafted with split-thickness skin developed late contractures requiring additional procedures. Among the 38 patients who underwent correction for postburn deformity, initial treatment was split-thickness grafting for 60.5 percent, full-thickness skin grafting for 7.9 percent, and spontaneous healing for 31.6 percent. Awareness among medical personnel and continued public education should be promoted to help prevent this unique type of pediatric steam burn from occurring.

Manual search approaches used by systematic reviewers in dermatology.

PubMed

Vassar, Matt; Atakpo, Paul; Kash, Melissa J

2016-10-01

Manual searches are supplemental approaches to database searches to identify additional primary studies for systematic reviews. The authors argue that these manual approaches, in particular hand-searching and perusing reference lists, are often considered the same yet lead to different outcomes. We conducted a PubMed search for systematic reviews in the top 10 dermatology journals (January 2006-January 2016). After screening, the final sample comprised 292 reviews. Statements related to manual searches were extracted from each review and categorized by the primary and secondary authors. Each statement was categorized as either "Search of Reference List," "Hand Search," "Both," or "Unclear." Of the 292 systematic reviews included in our sample, 143 reviews (48.97%) did not report a hand-search or scan of reference lists. One-hundred thirty-six reviews (46.58%) reported searches of reference lists, while 4 reviews (1.37%) reported systematic hand-searches. Three reviews (1.03%) reported use of both hand-searches and scanning reference lists. Six reviews (2.05%) were classified as unclear due to vague wording. Authors of systematic reviews published in dermatology journals in our study sample scanned reference lists more frequently than they conducted hand-searches, possibly contributing to biased search outcomes. We encourage systematic reviewers to routinely practice hand-searching in order to minimize bias.

Hong Kong Teacher Education Students' Goal Orientations and Their Relationship to Perceived Parenting Styles

ERIC Educational Resources Information Center

Chan, Kwok-Wai; Chan, Siu-Mui

2007-01-01

The study examined goal orientations, perceived parenting styles, and their relationships in a sample of Hong Kong teacher education students. It was found that students adopted both learning and performance goals but tended to be more performance goal-oriented. Females were more performance goal-oriented than males. As well, students perceived…

Two Studies of the Empirical Basis of Two Learning Resource-Oriented Motivational Strategies for Gifted Educators

ERIC Educational Resources Information Center

Vladut, Anamaria; Vialle, Wilma; Ziegler, Albert

2016-01-01

Two learning resource-oriented motivational strategies for gifted educators are introduced: a homeostatic orientation that aims for balance and an allostatic orientation that aims at growth. In order to establish the empirical basis of these motivational strategies, two studies were conducted with samples of students from a specialized…

The interaction of birth order and parental age on sexual orientation: an examination in two samples.

PubMed

Bogaert, Anthony F; Cairney, John

2004-01-01

A birth order and sexual orientation relationship has been demonstrated numerous times in men, but a related variable, parental age (i.e. age of parents when the participant was born), has been less studied and has demonstrated contradictory results. In this research, the relations among birth order, parental age and sexual orientation were examined in a national probability sample of the US (Kessler, 1994; Kessler et al., 1994) and in a Canadian sample of homosexual and heterosexual men closely matched on demographic characteristics (Blanchard & Bogaert, 1996a). In both studies, an interaction between birth order and parental age was observed in men, such that there was positive association between number of older siblings and the likelihood of homosexuality, but this association weakened with increasing parental age. No significant effects were observed for women. The results are discussed in relation to recent theories of the birth order/sexual orientation relationship.

Towards 3D crystal orientation reconstruction using automated crystal orientation mapping transmission electron microscopy (ACOM-TEM).

PubMed

Kobler, Aaron; Kübel, Christian

2018-01-01

To relate the internal structure of a volume (crystallite and phase boundaries) to properties (electrical, magnetic, mechanical, thermal), a full 3D reconstruction in combination with in situ testing is desirable. In situ testing allows the crystallographic changes in a material to be followed by tracking and comparing the individual crystals and phases. Standard transmission electron microscopy (TEM) delivers a projection image through the 3D volume of an electron-transparent TEM sample lamella. Only with the help of a dedicated TEM tomography sample holder is an accurate 3D reconstruction of the TEM lamella currently possible. 2D crystal orientation mapping has become a standard method for crystal orientation and phase determination while 3D crystal orientation mapping have been reported only a few times. The combination of in situ testing with 3D crystal orientation mapping remains a challenge in terms of stability and accuracy. Here, we outline a method to 3D reconstruct the crystal orientation from a superimposed diffraction pattern of overlapping crystals without sample tilt. Avoiding the typically required tilt series for 3D reconstruction enables not only faster in situ tests but also opens the possibility for more stable and more accurate in situ mechanical testing. The approach laid out here should serve as an inspiration for further research and does not make a claim to be complete.

Sexual health behaviors and sexual orientation in a U.S. national sample of college students.

PubMed

Oswalt, Sara B; Wyatt, Tammy J

2013-11-01

Many studies have examined differences in sexual behavior based on sexual orientation with results often indicating that those with same-sex partners engage in higher risk sexual behavior than people with opposite sex partners. However, few of these studies were large, national sample studies that also include those identifying as unsure. To address that gap, this study examined the relationship of sexual orientation and sexual health outcomes in a national sample of U.S. college students. The Fall 2009 American College Health Association-National College Health Assessment was used to examine sexual health related responses from heterosexual, gay, lesbian, bisexual, and unsure students (N = 25,553). Responses related to sexual behavior, safer sex behaviors, prevention and screening behaviors, and diagnosis of sexual health related conditions were examined. The findings indicated that sexual orientation was significantly associated with engaging in sexual behavior in the last 30 days. Sexual orientation was also significantly associated with the number of sexual partners in the previous 12 months, with unsure men having significantly more partners than gay, bisexual and heterosexual men and heterosexual men having significantly less partners than gay, bisexual and unsure men. Bisexual women had significantly more partners than females reporting other sexual orientations. Results examining the associations between sexual orientation and safer sex, prevention behaviors, and screening behaviors were mixed. Implications for practice, including specific programmatic ideas, were discussed.

Ca2+-independent Binding of Anionic Phospholipids by Phospholipase C δ1 EF-hand Domain*

PubMed Central

Cai, Jingfei; Guo, Su; Lomasney, Jon W.; Roberts, Mary F.

2013-01-01

Recombinant EF-hand domain of phospholipase C δ1 has a moderate affinity for anionic phospholipids in the absence of Ca2+ that is driven by interactions of cationic and hydrophobic residues in the first EF-hand sequence. This region of PLC δ1 is missing in the crystal structure. The relative orientation of recombinant EF with respect to the bilayer, established with NMR methods, shows that the N-terminal helix of EF-1 is close to the membrane interface. Specific mutations of EF-1 residues in full-length PLC δ1 reduce enzyme activity but not because of disturbing partitioning of the protein onto vesicles. The reduction in enzymatic activity coupled with vesicle binding studies are consistent with a role for this domain in aiding substrate binding in the active site once the protein is transiently anchored at its target membrane. PMID:24235144

Easy-To-Use Connector-Assembly Tool

NASA Technical Reports Server (NTRS)

Redmon, John W., Jr.; Jankowski, Fred

1988-01-01

Tool compensates for user's loss of dexterity under awkward conditions. Has jaws that swivel over 180 degree so angle adjusts with respect to handles. Oriented and held in position most comfortable and effective for user in given situation. Jaws lined with rubber pads so they conform to irregularly shaped parts and grips firmly but gently. Once tool engages part, it locks on it so user can release handles without losing part. Ratchet mechanism in tool allows user to work handles back and forth in confined space to connect or disconnect part. Quickly positioned, locked, and released. Gives user feel of its grip on part. Frees grasping muscles from work during part of task, giving user greater freedom to move hand. Operates with only one hand, leaving user's other hand free to manipulate wiring or other parts. Also adapts to handling and positioning extremely-hot or extremely-cold fluid lines, contaminated objects, abrasive or sharp objects, fragile items, and soft objects.

Development of a test protocol for evaluating EVA glove performance

NASA Technical Reports Server (NTRS)

Hinman, Elaine M.

1992-01-01

Testing gloved hand performance involves work from several disciplines. Evaluations performed in the course of reenabling a disabled hand, designing a robotic end effector or master controller, or hard-suit design have all yielded relevant information, and, in most cases, produced performance test methods. Most times, these test methods have been primarily oriented toward their parent discipline. For space operations, a comparative test which would provide a way to quantify pressure glove and end effector performance would be useful in dividing tasks between humans and robots. Such a test would have to rely heavily on sensored measurement, as opposed to questionnaires, to produce relevant data. However, at some point human preference would have to be taken into account. This paper presents a methodology for evaluating gloved hand performance which attempts to respond to these issues. Glove testing of a prototype glove design using this method is described.

Immersive, hands-on, team-based geophysical education at the University of Texas Marine Geology and Geophysics Field Course

NASA Astrophysics Data System (ADS)

Saustrup, S.; Gulick, S. P.; Goff, J. A.; Davis, M. B.; Duncan, D.; Reece, R.

2013-12-01

The University of Texas Institute for Geophysics (UTIG), part of the Jackson School of Geosciences, annually offers a unique and intensive three-week marine geology and geophysics field course during the spring/summer semester intersession. Now entering its seventh year, the course transitions students from a classroom environment through real-world, hands-on field acquisition, on to team-oriented data interpretation, culminating in a professional presentation before academic and industry employer representatives. The course is available to graduate students and select upper-division undergraduates, preparing them for direct entry into the geoscience workforce or for further academic study. Geophysical techniques used include high-resolution multichannel seismic reflection, CHIRP sub-bottom profiling, multibeam bathymetry, sidescan sonar, sediment coring, grab sampling, data processing, and laboratory analysis of sediments. Industry-standard equipment, methods, software packages, and visualization techniques are used throughout the course, putting students ahead of many of their peers in this respect. The course begins with a 3-day classroom introduction to the field area geology, geophysical methods, and computing resources used. The class then travels to the Gulf Coast for a week of hands-on field and lab work aboard two research vessels: UTIG's 22-foot, aluminum hulled Lake Itasca; and NOAA's 82-foot high-speed catamaran R/V Manta. The smaller vessel handles primarily shallow, inshore targets using multibeam bathymetry, sidescan sonar, and grab sampling. The larger vessel is used both inshore and offshore for multichannel seismic, CHIRP profiling, multibeam bathymetry, gravity coring, and vibracoring. Field areas to date have included Galveston and Port Aransas, Texas, and Grand Isle, Louisiana, with further work in Grand Isle scheduled for 2014. In the field, students work in teams of three, participating in survey design, instrument set-up, field deployment, data acquisition optimization, quality control, data archival, log-keeping, real-time data processing, laboratory sediment analysis, and even boat-handling. Teams are rotated through the two vessels and the onshore field laboratory to ensure that each student has hands-on experience with each aspect of the process. Although all students work on all data areas in the field, after returning from the field each team is assigned a particular region or geologic problem to interpret. Each team prepares and presents a formal presentation to UTIG researchers and industry representatives, explaining and defending their interpretations. This unique approach to hands-on field training, real-world science, and project-based teamwork helps prepare students for direct entry into the workforce, giving them a leg up on competitors for positions. This course has an impressive success ratio to show, with many students receiving job offers directly as a result of their participation in the course.

Dual tuning in creative processes: Joint contributions of intrinsic and extrinsic motivational orientations.

PubMed

Gong, Yaping; Wu, Junfeng; Song, Lynda Jiwen; Zhang, Zhen

2017-05-01

Intrinsic and extrinsic motivational orientations often coexist and can serve important functions. We develop and test a model in which intrinsic and extrinsic motivational orientations interact positively to influence personal creativity goal. Personal creativity goal, in turn, has a positive relationship with incremental creativity and an inverted U-shaped relationship with radical creativity. In a pilot study, we validated the personal creativity goal measure using 180 (Sample 1) and 69 (Sample 2) employees from a consulting firm. In the primary study, we tested the overall model using a sample of 657 research and development employees and their direct supervisors from an automobile firm. The results support the hypothesized model and yield several new insights. Intrinsic and extrinsic motivational orientations synergize with each other to strengthen personal creativity goal. Personal creativity goal in turn benefits incremental and radical creativity, but only up to a certain point for the latter. In addition to its linear indirect relationship with incremental creativity, intrinsic motivational orientation has an inverted U-shaped indirect relationship with radical creativity via personal creativity goal. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

The Effect of Prism Orientation in the Indentation Testing of Human Molar Enamel

PubMed Central

Braly, A.; Darnell, L.A.; Mann, A.B.; Teaford, M.F.; Weihs, T.P.

2007-01-01

Recent nanoindentation studies have demonstrated that the hardness and Young's modulus of human molar enamel decreases by more than 50% on moving from the occlusal surface to the dentin-enamel junction on cross-sectional samples. Possible sources of these variations are changes in local chemistry, microstructure, and prism orientation. This study investigates the latter source by performing nanoindentation tests at two different orientations relative to the hydroxyapatite prisms: parallel and perpendicular. A single sample volume was tested in order to maintain a constant chemistry and microstructure. The resulting data show very small differences between the two orientations for both hardness and Young's modulus. The 1.5 to 3.0% difference is significantly less than the standard deviations found within the data set. Thus, the variations in hardness and Young's modulus on cross-sectional samples of human molar are attributed to changes in local chemistry (varying levels of mineralization, organic matter, and water content) and changes in microstructure (varying volume fractions of inorganic crystals and organic matrix). The impact of prism orientation on mechanical properties measured by nanoindentation appears to be minimal. PMID:17449008

Raman spectra of oriented and non-oriented Cu hydroxy-phosphate minerals: libethenite, cornetite, pseudomalachite, reichenbachite and ludjibaite.

PubMed

Kharbish, Sherif; Andráš, Peter; Luptáková, Jarmila; Milovská, Stanislava

2014-09-15

Oriented cornetite [Cu3PO4(OH)3], libethenite [Cu2PO4(OH)] and pseudomalachite [Cu5(PO4)2(OH)4] and non-oriented reichenbachite [Cu5(PO4)2(OH)4] and ludjibaite [Cu5(PO4)2(OH)4] minerals from Ľubietová and Špania Dolina dump fields, Banská Bystrica, Slovakia were examined by polarized Raman spectroscopy. The examined minerals display the characteristic vibrational modes of PO4 and OH groups and further lattice modes. The PO4 stretching and bending vibrations of the investigated minerals occur between 1150 and 900 cm(-1) and between 700 and 350 cm(-1), respectively. On the other hand, the hydroxyl group stretching and bending modes appear above 3350 cm(-1) and between 900 and 700 cm(-1), respectively. The lattice vibrations occur below 350 cm(-1). The different bond distances of the PO4 groups readily explain the shift of the bands to higher or lower wavenumbers among the studied Cu hydroxy-phosphate minerals. Copyright © 2014. Published by Elsevier B.V.

Shear Strength of Remoulding Clay Samples Using Different Methods of Moulding

NASA Astrophysics Data System (ADS)

Norhaliza, W.; Ismail, B.; Azhar, A. T. S.; Nurul, N. J.

2016-07-01

Shear strength for clay soil was required to determine the soil stability. Clay was known as a soil with complex natural formations and very difficult to obtain undisturbed samples at the site. The aim of this paper was to determine the unconfined shear strength of remoulded clay on different methods in moulding samples which were proctor compaction, hand operated soil compacter and miniature mould methods. All the samples were remoulded with the same optimum moisture content (OMC) and density that were 18% and 1880 kg/m3 respectively. The unconfined shear strength results of remoulding clay soils for proctor compaction method was 289.56kPa with the strain 4.8%, hand operated method was 261.66kPa with the strain 4.4% and miniature mould method was 247.52kPa with the strain 3.9%. Based on the proctor compaction method, the reduction percentage of unconfined shear strength of remoulded clay soil of hand operated method was 9.66%, and for miniature mould method was 14.52%. Thus, because there was no significant difference of reduction percentage of unconfined shear strength between three different methods, so it can be concluded that remoulding clay by hand operated method and miniature mould method were accepted and suggested to perform remoulding clay samples by other future researcher. However for comparison, the hand operated method was more suitable to form remoulded clay sample in term of easiness, saving time and less energy for unconfined shear strength determination purposes.

Methods to enhance seismic faults and construct fault surfaces

NASA Astrophysics Data System (ADS)

Wu, Xinming; Zhu, Zhihui

2017-10-01

Faults are often apparent as reflector discontinuities in a seismic volume. Numerous types of fault attributes have been proposed to highlight fault positions from a seismic volume by measuring reflection discontinuities. These attribute volumes, however, can be sensitive to noise and stratigraphic features that are also apparent as discontinuities in a seismic volume. We propose a matched filtering method to enhance a precomputed fault attribute volume, and simultaneously estimate fault strikes and dips. In this method, a set of efficient 2D exponential filters, oriented by all possible combinations of strike and dip angles, are applied to the input attribute volume to find the maximum filtering responses at all samples in the volume. These maximum filtering responses are recorded to obtain the enhanced fault attribute volume while the corresponding strike and dip angles, that yield the maximum filtering responses, are recoded to obtain volumes of fault strikes and dips. By doing this, we assume that a fault surface is locally planar, and a 2D smoothing filter will yield a maximum response if the smoothing plane coincides with a local fault plane. With the enhanced fault attribute volume and the estimated fault strike and dip volumes, we then compute oriented fault samples on the ridges of the enhanced fault attribute volume, and each sample is oriented by the estimated fault strike and dip. Fault surfaces can be constructed by directly linking the oriented fault samples with consistent fault strikes and dips. For complicated cases with missing fault samples and noisy samples, we further propose to use a perceptual grouping method to infer fault surfaces that reasonably fit the positions and orientations of the fault samples. We apply these methods to 3D synthetic and real examples and successfully extract multiple intersecting fault surfaces and complete fault surfaces without holes.

Long term evolution of distant retrograde orbits in the Earth-Moon system

NASA Astrophysics Data System (ADS)

Bezrouk, Collin; Parker, Jeffrey S.

2017-09-01

This work studies the evolution of several Distant Retrograde Orbits (DROs) of varying size in the Earth-Moon system over durations up to tens of millennia. This analysis is relevant for missions requiring a completely hands off, long duration quarantine orbit, such as a Mars Sample Return mission or the Asteroid Redirect Mission. Four DROs are selected from four stable size regions and are propagated for up to 30,000 years with an integrator that uses extended precision arithmetic techniques and a high fidelity dynamical model. The evolution of the orbit's size, shape, orientation, period, out-of-plane amplitude, and Jacobi constant are tracked. It has been found that small DROs, with minor axis amplitudes of approximately 45,000 km or less decay in size and period largely due to the Moon's solid tides. Larger DROs (62,000 km and up) are more influenced by the gravity of bodies external to the Earth-Moon system, and remain bound to the Moon for significantly less time.

A strategy for enhancing shear strength and bending strength of FRP laminate using MWCNTs

NASA Astrophysics Data System (ADS)

Rawat, Prashant; Singh, K. K.

2016-09-01

Multi-wall carbon nanotubes (MWCNTs) promises to enhance mechanical properties exceptionally when it is doped with fiber reinforced polymer (FRP) composite. Glass fiber symmetrical laminate with eight layers of 4.0 mm thickness was fabricated by hand lay-up technique assisted by vacuum bagging method. Ply orientations for symmetrical laminate used [(0,90)/(+45,-45)/(+45,-45)/(0,90)//(90,0)/(+45,-45)/(+45,-45)/(90,0)]. MWCNTs reinforced three different samples (0 wt.%, 0.5 wt.% and 0.75 wt.% by weight) were tested on universal testing machine (UTM). Short beam strength test and inter laminar shear strength (ILSS) calculation have been done according to ASTM D2344 and ASTM D7264. UTM having maximum load capacity of 50 KN with loading rate of 0.1 mm/min to 50 mm/min was used for mechanical testing. Testing results justified that by adding 0.50 wt.% MWCNTs in symmetrical GFRP laminate can enhance inter laminar shear strength by 13.66% and bending strength by 44.22%.

Scintillation properties of a 2-inch diameter KCa0.8Sr0.2I3:Eu2+ single crystal

NASA Astrophysics Data System (ADS)

Wu, Yuntao; Lindsey, Adam C.; Loyd, Matthew; Stand, Luis; Zhuravleva, Mariya; Koschan, Merry; Melcher, Charles L.

2017-09-01

Inch-sized scintillating crystals are required for practical radiation detectors such as hand-held radio-isotope identification devices. In this work, a transparent and colorless 2-inch diameter KCa0.8Sr0.2I3: 0 . 5 mo% Eu2+ single crystal was grown by the vertical Bridgman method, and the scintillation properties of a ∅ 50 mm × 45 mm long sample were evaluated. The Eu2+ 5d1- 4 f emission under X-ray excitation is centered at 472 nm. Its scintillation decay time under 137 Cs source irradiation is 2 . 37 μs, and the absolute light output is 51,000 ± 3000 photons/MeV. The energy resolution at 662 keV was evaluated for different orientations of the crystals with respect to the PMT, and the effect of 40 K background subtraction on energy resolution was evaluated. The performance of the packaged crystal was also investigated.

Mineralogy of SNC Meteorite EET79001 by Simultaneous Fitting of Moessbauer Backscatter Spectra

NASA Technical Reports Server (NTRS)

Morris, Richard V.; Agresti, D. G.

2010-01-01

We have acquired M ssbauer spectra for SNC meteorite EET79001 with a MIMOS II backscatter M ssbauer spectrometer [1] similar to those now operating on Mars as part of the Mars Exploration Rover (MER) missions. We are working to compare the Fe mineralogical composition of martian meteorites with in-situ measurements on Mars. Our samples were hand picked from the >1 mm size fraction of saw fines on the basis of lithology, color, and grain size (Table 1). The chips were individually analyzed at approx.300K by placing them on a piece of plastic that was in turn supported by the contact ring of the instrument (oriented vertically). Tungsten foil was used to mask certain areas from analysis. As shown in Figure 1, a variety of spectra was obtained, each resulting from different relative contributions of the Fe-bearing minerals present in the sample. Because the nine samples are reasonably mixtures of the same Fe-bearing phases in variable proportions, the nine spectra were fit simultaneously (simfit) with a common model, adjusting parameters to a single minimum chi-squared convergence criterion [2]. The starting point for the fitting model and values of hyperfine parameters was the work of Solberg and Burns [3], who identified olivine, pyroxene, and ferrous glass as major, and ilmenite and a ferric phase as minor (<5%), Fe-bearing phases in EET79001.

Cognitive correlates of serious suicidal ideation in a community sample of adolescents.

PubMed

Labelle, Réal; Breton, Jean-Jacques; Pouliot, Louise; Dufresne, Marie-Josée; Berthiaume, Claude

2013-03-05

Studies indicate that a dysfunctional attributional style, problem-solving deficits and hopelessness place youths at risk of developing suicidal thoughts and engaging in suicidal behaviour. However, in the realm of suicidality in adolescent, no study has examined the linkages between these three cognitive variables and suicidal ideation in non-clinical samples while taking into account the moderating role of gender on the relationships and controlling for depression. In this community study of 712 adolescents 14-18 years of age, through a multivariate approach, the interaction between the cognitive variables, depression and gender was examined with depression controlled in the analyses. Problem-solving deficits and hopelessness proved predictive of such ideation whether or not depressive symptoms were controlled in the analyses. Negative problem orientation/avoidant style was more predictive of ideation in boys than in girls. On the other hand, hopelessness was more predictive for girls than boys. Results were based on a convenience community sample of adolescents and a cross-sectional survey. Results suggest that a unique explanatory model of the suicide process in adolescence that fails to take account of gender would be ill informed. Suicide prevention strategies should be differentiated according to gender with a stronger emphasis in hopelessness in female adolescents, and problem-solving deficits in male adolescents. Copyright © 2012 Elsevier B.V. All rights reserved.

Evaluation of a functional hand orthosis combined with electrical stimulation adjunct to arm-hand rehabilitation in subacute stroke patients with a severely to moderately affected hand function.

PubMed

Franck, Johan Anton; Smeets, Rob Johannes Elise Marie; Seelen, Henk Alexander Maria

2018-01-09

To investigate the usability and effectiveness of a functional hand orthosis, combined with electrical stimulation adjunct to therapy-as-usual, on functional use of the moderately/severely impaired hand in sub-acute stroke patients. Single case experiment (A-B-A'-design) involving eight sub-acute stroke patients. The functional hand orthosis and electrical stimulation were used for six weeks, four days/week, 45'/day. Action_Research_Arm_Test, Intrinsic_Motivation_Inventory. At group level, patients improved 19.2 points (median value) (interquartile range: [8.8, 29.5] points) on the Action_Research_Arm_Test (p = 0.001). After correcting for spontaneous recovery and/or therapy-as-usual effects Action_Research_Arm_Test scores still improved significantly (median: 17.2 points; interquartile range: [5.1, 29.2] points) (p = 0.002). At individual level, six patients had improved as to arm-hand skill performance at follow-up (p < = 0.010). In one patient, arm-hand skill performance improvement did not attain statistical significance. In another patient, no arm-hand skill performance improvement was observed. Average Intrinsic_Motivation_Inventory sub-scores were between 4.6 and 6.3 (maximum: 7), except for 'perceived pressure/tension' (3.3). Sub-acute stroke patients who display only little/modest improvement on their capacity to perform daily activities, seem to benefit from training with a dynamic arm orthosis in combination with electrical stimulation. Patients' perceived intrinsic motivation and sense of self-regulation was high. Implications for rehabilitation Arm-hand training featuring the dynamic hand orthosis in combination with electrical stimulation shows a shift from no dexterity to dexterity. As to the users' experience regarding the dynamic hand orthosis, patients perceive a high-intrinsic motivation and sense of self-regulation. Combining the orthosis with electrical stimulation creates opportunities for a nonfunctional hand towards task-oriented training.

Three-dimensional visual feature representation in the primary visual cortex

PubMed Central

Tanaka, Shigeru; Moon, Chan-Hong; Fukuda, Mitsuhiro; Kim, Seong-Gi

2011-01-01

In the cat primary visual cortex, it is accepted that neurons optimally responding to similar stimulus orientations are clustered in a column extending from the superficial to deep layers. The cerebral cortex is, however, folded inside a skull, which makes gyri and fundi. The primary visual area of cats, area 17, is located on the fold of the cortex called the lateral gyrus. These facts raise the question of how to reconcile the tangential arrangement of the orientation columns with the curvature of the gyrus. In the present study, we show a possible configuration of feature representation in the visual cortex using a three-dimensional (3D) self-organization model. We took into account preferred orientation, preferred direction, ocular dominance and retinotopy, assuming isotropic interaction. We performed computer simulation only in the middle layer at the beginning and expanded the range of simulation gradually to other layers, which was found to be a unique method in the present model for obtaining orientation columns spanning all the layers in the flat cortex. Vertical columns of preferred orientations were found in the flat parts of the model cortex. On the other hand, in the curved parts, preferred orientations were represented in wedge-like columns rather than straight columns, and preferred directions were frequently reversed in the deeper layers. Singularities associated with orientation representation appeared as warped lines in the 3D model cortex. Direction reversal appeared on the sheets that were delimited by orientation-singularity lines. These structures emerged from the balance between periodic arrangements of preferred orientations and vertical alignment of same orientations. Our theoretical predictions about orientation representation were confirmed by multi-slice, high-resolution functional MRI in the cat visual cortex. We obtained a close agreement between theoretical predictions and experimental observations. The present study throws a doubt about the conventional columnar view of orientation representation, although more experimental data are needed. PMID:21724370

Three-dimensional visual feature representation in the primary visual cortex.

PubMed

Tanaka, Shigeru; Moon, Chan-Hong; Fukuda, Mitsuhiro; Kim, Seong-Gi

2011-12-01

In the cat primary visual cortex, it is accepted that neurons optimally responding to similar stimulus orientations are clustered in a column extending from the superficial to deep layers. The cerebral cortex is, however, folded inside a skull, which makes gyri and fundi. The primary visual area of cats, area 17, is located on the fold of the cortex called the lateral gyrus. These facts raise the question of how to reconcile the tangential arrangement of the orientation columns with the curvature of the gyrus. In the present study, we show a possible configuration of feature representation in the visual cortex using a three-dimensional (3D) self-organization model. We took into account preferred orientation, preferred direction, ocular dominance and retinotopy, assuming isotropic interaction. We performed computer simulation only in the middle layer at the beginning and expanded the range of simulation gradually to other layers, which was found to be a unique method in the present model for obtaining orientation columns spanning all the layers in the flat cortex. Vertical columns of preferred orientations were found in the flat parts of the model cortex. On the other hand, in the curved parts, preferred orientations were represented in wedge-like columns rather than straight columns, and preferred directions were frequently reversed in the deeper layers. Singularities associated with orientation representation appeared as warped lines in the 3D model cortex. Direction reversal appeared on the sheets that were delimited by orientation-singularity lines. These structures emerged from the balance between periodic arrangements of preferred orientations and vertical alignment of the same orientations. Our theoretical predictions about orientation representation were confirmed by multi-slice, high-resolution functional MRI in the cat visual cortex. We obtained a close agreement between theoretical predictions and experimental observations. The present study throws a doubt about the conventional columnar view of orientation representation, although more experimental data are needed. Copyright © 2011 Elsevier Ltd. All rights reserved.

Relationship Status, Psychological Orientation, and Sexual Risk Taking in a Heterosexual African American College Sample

ERIC Educational Resources Information Center

Winfield, Evelyn B.; Whaley, Arthur L.

2005-01-01

The present study examined relationship status, psychological orientation toward sexual risk taking, and other characteristics as potential correlates of risky sexual behavior in a sample of 223 heterosexual African American college students. Risky sexual behavior was investigated as a multinomial variable (i.e., abstinence, consistent condom use,…

Value Orientation of Singapore Adolescents Towards Truthfulness, Justice and Compassion.

ERIC Educational Resources Information Center

Seng, SeokHoon; Siang, Low Meow; Wei, Tan Tai

This study examined the value orientation of Singapore adolescents toward the three fundamental values of truthfulness, justice, and compassion. A random sample of 315 secondary school students from 4 schools in Singapore (135 males and 180 females) completed a questionnaire, and a select sample of 19 students completed interviews about their…

Public health campaign to promote hand hygiene before meals in a college of veterinary medicine.

PubMed

Heinrich, Ellen R E; KuKanich, Kate S; Davis, Elizabeth; White, Brad J

2014-01-01

Veterinary students can be exposed to environmental infectious agents in school that may include zoonotic pathogens. Encouraging effective hand hygiene can minimize the spread of zoonoses and promote public health and the One Health concept among veterinary students. The purpose of this study was to determine if a campaign could improve hand hygiene among veterinary students at extracurricular meetings serving meals. Nine Kansas State University College of Veterinary Medicine (KSU-CVM) extracurricular organizations participated in the study, sanitizer was provided at each meeting, and baseline hand-hygiene data were observed. A hand-hygiene opportunity was defined as any student observed to approach the buffet food line. Sanitizer use (yes/no) and gender (male/female) were recorded. Campaign interventions included a 3.5-minute educational video and a novel motivational poster. The video was presented to all first-year, second-year, and third-year veterinary students. Posters encouraging hand sanitization were displayed on doors and tables alongside sanitizers at each meeting. Observational hand-hygiene data were collected immediately after introduction of interventions and again 3 months later. Environmental sampling for presence of bacteria in and around meeting locations was also performed. Observed hand hygiene was lowest during baseline (11.0% ± 1.7), improved significantly post-intervention (48.8% ± 3.2), and remained improved at 3-month follow-up (33.5% ± 4.0). Females had higher probability of hand sanitizing (35.9% ± 2.2) than males (21.4% ± 2.4) (p<.01). Clostridium perfringens was isolated from 2/42 samples, and Salmonella spp. were isolated from 4/42 samples. A short-term public health campaign targeting veterinary students successfully improved hand hygiene before meals.

A Tunable Reentrant Resonator with Transverse Orientation of Electric Field for in Vivo EPR Spectroscopy

NASA Astrophysics Data System (ADS)

Chzhan, Michael; Kuppusamy, Periannan; Samouilov, Alexandre; He, Guanglong; Zweier, Jay L.

1999-04-01

There has been a need for development of microwave resonator designs optimized to provide high sensitivity and high stability for EPR spectroscopy and imaging measurements ofin vivosystems. The design and construction of a novel reentrant resonator with transversely oriented electric field (TERR) and rectangular sample opening cross section for EPR spectroscopy and imaging ofin vivobiological samples, such as the whole body of mice and rats, is described. This design with its transversely oriented capacitive element enables wide and simple setting of the center frequency by trimming the dimensions of the capacitive plate over the range 100-900 MHz with unloadedQvalues of approximately 1100 at 750 MHz, while the mechanical adjustment mechanism allows smooth continuous frequency tuning in the range ±50 MHz. This orientation of the capacitive element limits the electric field based loss of resonatorQobserved with large lossy samples, and it facilitates the use of capacitive coupling. Both microwave performance data and EPR measurements of aqueous samples demonstrate high sensitivity and stability of the design, which make it well suited forin vivoapplications.

Comparison of quartz crystallographic preferred orientations identified with optical fabric analysis, electron backscatter and neutron diffraction techniques.

PubMed

Hunter, N J R; Wilson, C J L; Luzin, V

2017-02-01

Three techniques are used to measure crystallographic preferred orientations (CPO) in a naturally deformed quartz mylonite: transmitted light cross-polarized microscopy using an automated fabric analyser, electron backscatter diffraction (EBSD) and neutron diffraction. Pole figure densities attributable to crystal-plastic deformation are variably recognizable across the techniques, particularly between fabric analyser and diffraction instruments. Although fabric analyser techniques offer rapid acquisition with minimal sample preparation, difficulties may exist when gathering orientation data parallel with the incident beam. Overall, we have found that EBSD and fabric analyser techniques are best suited for studying CPO distributions at the grain scale, where individual orientations can be linked to their source grain or nearest neighbours. Neutron diffraction serves as the best qualitative and quantitative means of estimating the bulk CPO, due to its three-dimensional data acquisition, greater sample area coverage, and larger sample size. However, a number of sampling methods can be applied to FA and EBSD data to make similar approximations. © 2016 The Authors Journal of Microscopy © 2016 Royal Microscopical Society.

Borehole sampling of fracture populations - compensating for borehole sampling bias in crystalline bedrock aquifers, Mirror Lake, Grafton County, New Hampshire

USGS Publications Warehouse

McDonald, G.D.; Paillet, Frederick L.; Barton, C.C.; Johnson, C.D.

1997-01-01

The clustering of orientations of hydraulically conductive fractures in bedrock at the Mirror Lake, New Hampshire fractured rock study site was investigated by comparing the orientations of fracture populations in two subvertical borehole arrays with those mapped on four adjacent subvertical roadcuts. In the boreholes and the roadcuts, the orientation of fracture populations appears very similar after borehole data are compensated for undersampling of steeply dipping fractures. Compensated borehole and pavement fracture data indicate a northeast-striking population of fractures with varying dips concentrated near that of the local foliation in the adjacent rock. The data show no correlation between fracture density (fractures/linear meter) and distance from lithologic contacts in both the boreholes and the roadcuts. The population of water-producing borehole fractures is too small (28 out of 610 fractures) to yield meaningful orientation comparisons. However, the orientation of large aperture fractures (which contains all the producing fractures) contains two or three subsidiary clusters in orientation frequency that are not evident in stereographic projections of the entire population containing all aperture sizes. Further, these subsidiary orientation clusters do not coincide with the dominant (subhorizontal and subvertical) regional fracture orientations.

Strategic orientations of small multihospital systems.

PubMed Central

Luke, R D; Begun, J W

1988-01-01

Strategic behaviors of organizations can be classified along two dimensions--growth orientations, or patterns of evolution over time, and action orientations, or strategic aggressiveness in undertaking a particular growth orientation. We create measures of growth and action orientations for small multihospital systems and test the validity of the growth and action orientation typologies, using data from a sample of small multihospital systems. Growth and action orientations do appear to exist independently of each other, and they are related to the ownership status of the systems. Not-for-profit and church-other systems exhibit similar strategic orientations, unlike those of Catholic and investor-owned systems. PMID:3060448

Practical Life from the Second Plane to Third Plane: Orientation to History and Social Organization

ERIC Educational Resources Information Center

Webster, James

2015-01-01

In lyrical prose, Jim Webster lays out his view on the universal human use of tools and how "humans meet the practical demands of life." Webster lauds physical work and the work of the hand as they both support engagement, social cooperation, a deepening of relationships, and sustainability. Practical work is valuable and is plentiful as…

Joystick With Cable Springs Offers Better Feel

NASA Technical Reports Server (NTRS)

Kerley, James; Ecklund, Wayne

1992-01-01

Improved joystick allows motion in 6 degrees of freedom, biased toward central position and orientation by 16 segments of cable serving as springs. Improvement in feel and control results from nonlinear compliance of cable-spring assembly. Nonlinear variations accommodate natural reactions of hand and brain. Operator functions as part of feedback control loop. More comfortable, increases ability to exert control and reduces fatigue.

hm Science Study Skills Program: People, Energy, and Appropriate Technology. Student Text.

ERIC Educational Resources Information Center

Wilson, Carol; Krasnow, Gary

This program includes 14 activity-oriented units which integrate instruction in science study skills with hands-on learning about energy and appropriate technology. The program is suitable for use in a wide range of science curricula in grades 7 to 10. Unit topics and the corresponding skills fostered (in parentheses) in part one focus on: the…

Environmental Studies Center Teacher Books. 7th Grade - Spoil Island Investigation.

ERIC Educational Resources Information Center

Martin County Schools, Jensen Beach, FL. Environmental Studies Center.

This teacher's guide, one of nine teacher packages developed for use in the sequential, hands-on, field-oriented, K-8 environmental education program of the Martin County Schools in Florida, was developed for use with secondary students in grade seven prior to and after a visit to an environmental studies center located near an estuarine area. The…

Job Knowledge Test Design: A Cognitively-Oriented Approach. Institute Report No. 241.

ERIC Educational Resources Information Center

DuBois, David; And Others

Selected cognitive science methods were used to modify existing test development procedures so that the modified procedures could in turn be used to improve the usefulness of job knowledge tests as a proxy for hands-on performance. A plan-goal graph representation was used to capture the knowledge content and goal structure of the task of using a…

A Participant-Oriented, Research-Based Approach for Design of a Biochemistry Workshop for Faculty at Undergraduate Institutions

ERIC Educational Resources Information Center

Owen, Rebecca L.; Breyer, Emelita D.

2005-01-01

The Molecular Genetics and Protein Structure and Function workshop is one of a series of workshops offered by the National Science Foundation-funded Center for Workshops in the Chemical Sciences. The workshop provides a hands-on introduction to current topics and techniques in molecular genetics and protein structure/function as applied to…

Learning Management Systems: Coupled Simulations and Assessments in a Digital Systems Course

ERIC Educational Resources Information Center

Wuttke, Heinz-Dietrich; Henke, Karsten

2009-01-01

Purpose: The content, provided in learning management systems (LMS), is often text oriented as in a usual textbook, extended by some animations and links. Hands on activities and experiments are not possible. The paper aims to give an overview about the concept to couple smart simulation and assessment tools with an LMS to provide a more…

Transitivity, Space, and Hand: The Spatial Grounding of Syntax

ERIC Educational Resources Information Center

Boiteau, Timothy W.; Almor, Amit

2017-01-01

Previous research has linked the concept of number and other ordinal series to space via a spatially oriented mental number line. In addition, it has been shown that in visual scene recognition and production, speakers of a language with a left-to-right orthography respond faster to and tend to draw images in which the agent of an action is…

Learntime and Learning Place-Focused Forward-Oriented Design for Learning in Technology-Enhanced Classrooms

ERIC Educational Resources Information Center

Sun, Susan Y. H.

2016-01-01

This study reports on a teacher's ongoing design activities in a fully online language course when the class was in progress. The aims were, firstly, to provide first-hand experience and insight into a teacher's design work in a real-life, technology-enhanced learning (TEL) classroom; and secondly, to facilitate reflective analysis of the emerging…

Self-identity and the theory of planned behaviour: between- and within-participants analyses.

PubMed

Hagger, Martin S; Chatzisarantis, Nikos L D

2006-12-01

Two studies addressed the hypothesis that a minority of people are more oriented towards their self-identity when forming intentions to act than the traditional antecedents of intentional action; attitudes, subjective norms and perceived behavioural control (PBC). In Study 1, participants (N=241) completed measures of an augmented version of theory of planned behaviour (TPB) that included self-identity for 30 behaviours. Using within-participants multiple regression analyses, the sample was classified into self-identity-oriented (SI-oriented) and TPB-oriented groups. Between-participants multiple regression analyses revealed that self-identity was a significantly stronger predictor of intentions and accounted for significantly more incremental variance in intentions in the SI-oriented sample compared with the TPB-oriented sample across the 30 behaviours. In Study 2, participants (N=250) completed the same TPB and self-identity measures used in Study 1 as well as measures of generalized self-concept and social physique anxiety for dieting behaviour. Results indicated that self-identity was significantly associated with the generalized self-related measures, and self-concept and social physique anxiety moderated the self-identity-intention relationship. This investigation provides some preliminary evidence to support the effect of individual differences in self-identity on the formation of intentions to act.

Nonlinear dimensionality reduction of data lying on the multicluster manifold.

PubMed

Meng, Deyu; Leung, Yee; Fung, Tung; Xu, Zongben

2008-08-01

A new method, which is called decomposition-composition (D-C) method, is proposed for the nonlinear dimensionality reduction (NLDR) of data lying on the multicluster manifold. The main idea is first to decompose a given data set into clusters and independently calculate the low-dimensional embeddings of each cluster by the decomposition procedure. Based on the intercluster connections, the embeddings of all clusters are then composed into their proper positions and orientations by the composition procedure. Different from other NLDR methods for multicluster data, which consider associatively the intracluster and intercluster information, the D-C method capitalizes on the separate employment of the intracluster neighborhood structures and the intercluster topologies for effective dimensionality reduction. This, on one hand, isometrically preserves the rigid-body shapes of the clusters in the embedding process and, on the other hand, guarantees the proper locations and orientations of all clusters. The theoretical arguments are supported by a series of experiments performed on the synthetic and real-life data sets. In addition, the computational complexity of the proposed method is analyzed, and its efficiency is theoretically analyzed and experimentally demonstrated. Related strategies for automatic parameter selection are also examined.

The consumption of Internet child pornography and violent and sex offending

PubMed Central

Endrass, Jérôme; Urbaniok, Frank; Hammermeister, Lea C; Benz, Christian; Elbert, Thomas; Laubacher, Arja; Rossegger, Astrid

2009-01-01

Background There is an ongoing debate on whether consumers of child pornography pose a risk for hands-on sex offenses. Up until now, there have been very few studies which have analyzed the association between the consumption of child pornography and the subsequent perpetration of hands-on sex offenses. The aim of this study was to examine the recidivism rates for hands-on and hands-off sex offenses in a sample of child pornography users using a 6 year follow-up design. Methods The current study population consisted of 231 men, who were subsequently charged with consumption of illegal pornographic material after being detected by a special operation against Internet child pornography, conducted by the Swiss police in 2002. Criminal history, as well as recidivism, was assessed using the criminal records from 2008. Results 4.8% (n = 11) of the study sample had a prior conviction for a sexual and/or violent offense, 1% (n = 2) for a hands-on sex offense, involving child sexual abuse, 3.3% (n = 8) for a hands-off sex offense and one for a nonsexual violent offense. When applying a broad definition of recidivism, which included ongoing investigations, charges and convictions, 3% (n = 7) of the study sample recidivated with a violent and/or sex offense, 3.9% (n = 9) with a hands-off sex offense and 0.8% (n = 2) with a hands-on sex offense. Conclusion Consuming child pornography alone is not a risk factor for committing hands-on sex offenses – at least not for those subjects who had never committed a hands-on sex offense. The majority of the investigated consumers had no previous convictions for hands-on sex offenses. For those offenders, the prognosis for hands-on sex offenses, as well as for recidivism with child pornography, is favorable. PMID:19602221

The object-based Simon effect: grasping affordance or relative location of the graspable part?

PubMed

Cho, Dongbin Tobin; Proctor, Robert W

2010-08-01

Reaction time is often shorter when the irrelevant graspable handle of an object corresponds with the location of a keypress response to the relevant attribute than when it does not. This object-based Simon effect has been attributed to an affordance for grasping the handle with the hand to the same side. Because a grasping affordance should differentially affect keypress responses only when they are made with different hands, we conducted three experiments that measured the object-based Simon effect for frying pan stimuli using between- and within-hand response sets. When the relevant stimulus dimension was color, neither the object-based Simon effect nor the location-based Simon effect varied across response sets. When upright-inverted orientation judgments were made for the frying pan and for nongraspable stimuli derived from it, there again was no significant difference in size of the between- and within-hand Simon effects for any of the stimuli. The results provide evidence that the Simon effect for graspable frying pan stimuli is because of relative location of the handle and not to a grasping affordance.

Handed behavior in hagfish--an ancient vertebrate lineage--and a survey of lateralized behaviors in other invertebrate chordates and elongate vertebrates.

PubMed

Miyashita, Tetsuto; Palmer, A Richard

2014-04-01

Hagfish represent an ancient lineage of boneless and jawless vertebrates. Among several curious behaviors they exhibit, solitary individuals in one dominant genus of hagfish (Eptatretus spp.) regularly rest in a tightly coiled posture. We present the first systematic treatment of this distinctive behavior. Individual northeastern Pacific hagfish (E. stoutii) exhibited significant handedness (preferred orientation of coiling). However, right-coiling and left-coiling individuals were equally common in the population. Individual hagfish likely develop a preference for one direction by repeating the preceding coiling direction. We also revisit classical accounts of chordate natural history and compare the coiling behavior of Eptatretus with other handed or lateralized behaviors in non-vertebrate chordates, lampreys, and derived vertebrates with elongate bodies. Handed behaviors occur in many of these groups, but they likely evolved independently. In contrast to vertebrates, morphological asymmetries may bias lateralized larval behaviors toward one side in cephalochordates and tunicates. As a consequence, no known handed behavior can be inferred to have existed in the common ancestor of vertebrates.

Shock and Microstructural Characterization of the α-ω Phase Transition in Titanium Crystals

NASA Astrophysics Data System (ADS)

Morrow, Benjamin M.; Rigg, Paulo A.; Jones, David R.; Addessio, Francis L.; Trujillo, Carl P.; Saavedra, Ramon A.; Martinez, Daniel T.; Cerreta, Ellen K.

2017-12-01

A multicrystal comprised of a small number of large crystals of high-purity titanium and a [0001] oriented high-purity single crystal titanium sample were shock loaded using gas gun plate impact experiments. Tests were performed at stresses above the α {-}ω phase transition stress (for high-purity polycrystalline specimens) to observe the behavior of oriented crystals under similar conditions. Post-mortem characterization of the shocked microstructure was conducted on the single crystal sample to measure textures, and quantify phases and twinning. The apparent activation of plastic and transformation mechanisms was dependent upon crystal orientation. Specifically, the [0001] crystal showed a higher Hugoniot elastic limit than the [10\\bar{1}0] or [3\\bar{1}\\bar{4}4] orientations. The slope of velocity as a function of time was lower in the [0001] orientation than the other orientations during plastic deformation, indicating sluggish transformation kinetics for the α to ω phase transition for the [0001] oriented crystal. Microtexture measurements of a recovered [0001] oriented single crystal revealed the presence of retained ω phase after unloading, with orientations of the constituent phase fractions indicative of the forward α → ω transition, rather than the reverse ω → α transition, suggesting that the material never achieved a state of 100% ω phase.

Beyond the Entrepreneurial University: The Potential Role of South Africa's Historically Disadvantaged Institutions in Reconstruction and Development

NASA Astrophysics Data System (ADS)

Subotzky, George

1999-11-01

The author identifies two tendencies affecting higher education. On the one hand, universities and colleges are under pressure to become more market-oriented and to respond to rapid changes in information technology and knowledge production. On the other hand, there is a growing concern that they should work for the benefit of society, promoting social equity and responding to community needs. The author argues that partnerships between the community and institutions of higher education are an effective way of contributing to community development. He describes the potential of South Africa's historically disadvantaged institutions to contribute to reconstruction and development in the aftermath of apartheid.

Predictors of "New Economy" Career Orientation in an Australian Sample of Late Adolescents

ERIC Educational Resources Information Center

Creed, Peter; Macpherson, Jennifer; Hood, Michelle

2011-01-01

The authors surveyed 207 late adolescents on measures of new economy career orientation (protean and boundaryless career orientation), career adaptability (planning, self-exploration, environmental exploration, decision making, and self-regulation), disposition (proactive disposition), and environmental support (social support) and hypothesized…

Pseudohyperglycemia: Effects of Unwashed Hand after Fruit Peeling or Handling on Fingertips Blood Glucose Monitoring Results.

PubMed

Olamoyegun, M A; Oloyede, T; Adewoye, O G; Abdulkarim, S O; Adeleke, A A

2016-01-01

Self-monitoring of blood glucose (SMBG) is an important component of management for diabetes mellitus (DM), especially in T1DM and T2DM patients who are on insulin therapy. Adequate blood glucose monitoring and prompt intervention are necessary to prevent blood glucose (BG) fluctuation and delay long-term diabetes complications. People with DM are advised to clean their hands before SMBG to remove any dirt or food residue that might affect the reading. The study tested the hypothesis that falsely elevated BG levels from fingertip occur after peeling or handling fruits in an unwashed hand. Fifty apparently healthy nondiabetes volunteers were enrolled. Capillary BG samples were collected from the fingertips after peeling or handling apple, orange, banana, watermelon, and pawpaw, followed by no hand washing for 1 h, cleaning the fingertip with alcohol swab once, five times, and washing hand thoroughly with tap water and drying. These samples were then analyzed with two different glucose meters. The mean BG values, measured from fingertip blood samples after peeling, and handling any of the fruits followed by no hand washing were significantly high, even after cleaning fingertip with a swab of alcohol once. However, there were no significant difference in BG levels measured after peeling and handling fruits followed by hand washing and the level of BG before peeling and handling fruits. Handling of peeled fruits with no hand washing with tap water is associated with overestimation of capillary BG (Pseudohyperglycemia) monitored with glucose meters.

Maturation of the Middle Phalanx of the Third Finger: A Comparative Study between Right and Left Hand.

PubMed

Gracco, Antonio; Bruno, Giovanni; De Stefani, Alberto; Siviero, Laura; Perri, Alessandro; Stellini, Edoardo

Recently a classification of patient's skeletal age based on the phalanx maturation, The Middle Phalanx Maturation of the third finger (MPM) method, was suggested. The aim of this study is to evaluate if there is a difference in MPM between the right and left hand. Two hundred fifty-four patients were obtained from the Complex Operating Unit of Orthodontics of Padua University Hospital. The total sample size has been selected by appropriate statistical calculations resulting in 130 patients. It was decided to further double the sample size of a previous study to ensure a robust statistical analysis. Radiographs of the right and left were obtained using the MPM method. Stages were compared using the right hand as a reference. The statistical analysis (Fisher exact test) was performed for the entire sample and related to gender in order to compare the right and the left hand stages. In MPS2, 6 out 49 (12.2%) males and 7 out 27 females (25.9%) showed MPS3 in the left hand (p-value < 0.05). In all other stages, a total agreement (100%) was found. The authors confirm the use of the right hand as reference. In patients with MPS2 an additional radiograph on the left hand can be taken in order to increase the diagnostic accuracy. In all other stages other radiographs are not needed as a total agreement between the right and left hand was found.

Metallographic Characterization of Wrought Depleted Uranium

DOE Office of Scientific and Technical Information (OSTI.GOV)

Forsyth, Robert Thomas; Hill, Mary Ann

Metallographic characterization was performed on wrought depleted uranium (DU) samples taken from the longitudinal and transverse orientations from specific locations on two specimens. Characterization of the samples included general microstructure, inclusion analysis, grain size analysis, and microhardness testing. Comparisons of the characterization results were made to determine any differences based on specimen, sample orientation, or sample location. In addition, the characterization results for the wrought DU samples were also compared with data obtained from the metallographic characterization of cast DU samples previously characterized. No differences were observed in microstructure, inclusion size, morphology, and distribution, or grain size in regard tomore » specimen, location, or orientation for the wrought depleted uranium samples. However, a small difference was observed in average hardness with regard to orientation at the same locations within the same specimen. The longitudinal samples were slightly harder than the transverse samples from the same location of the same specimen. This was true for both wrought DU specimens. Comparing the wrought DU sample data with the previously characterized cast DU sample data, distinct differences in microstructure, inclusion size, morphology and distribution, grain size, and microhardness were observed. As expected, the microstructure of the wrought DU samples consisted of small recrystallized grains which were uniform, randomly oriented, and equiaxed with minimal twinning observed in only a few grains. In contrast, the cast DU microstructure consisted of large irregularly shaped grains with extensive twinning observed in most grains. Inclusions in the wrought DU samples were elongated, broken and cracked and light and dark phases were observed in some inclusions. The mean inclusion area percentage for the wrought DU samples ranged from 0.08% to 0.34% and the average density from all wrought DU samples was 1.62E+04/cm 2. Inclusions in the cast DU samples were equiaxed and intact with light and dark phases observed in some inclusions. The mean inclusion area percentage for the cast DU samples ranged from 0.93% to 1.00% and the average density from all wrought DU samples was 2.83E+04/cm 2. The average mean grain area from all wrought DU samples was 141 μm 2 while the average mean grain area from all cast DU samples was 1.7 mm2. The average Knoop microhardness from all wrought DU samples was 215 HK and the average Knoop microhardness from all cast DU samples was 264 HK.« less

Is the hand to speech what speech is to the hand?

PubMed

Mildner, V

2000-01-01

Interference between the manual and the verbal performance on two types of concurrent verbal-manual tasks was studied on a sample of 48 female right-handers. The more complex verbal task (storytelling) affected both hands significantly, the less complex (essentially phonemic) task affected only the right hand, with insignificant negative influence on the left-hand performance. No significant reciprocal effects of the motor task on verbalization were found.

Dermal exposure to chromium in the grinding of stainless and acid-proof steel.

PubMed

Mäkinen, Milja; Linnainmaa, Markku

2004-04-01

The aim of the study was to measure the dermal exposure levels of chromium dust during grinding of stainless and acid-proof steel parts. The potential dermal exposure of the body was measured with a patch sampling method and the actual exposure of hands with a hand-wash method. Simultaneously, personal air samples were also collected. The range of body and hand exposure to chromium dust was 4.04-3406 and 0.72-79.7 mg/h, respectively. Dust was distributed quite evenly to different body parts. Workers using hand-held grinding tools were more exposed than those using band grinders. It was judged that the sampling methods applied in this study gave a realistic estimation of exposure levels, because of the uniform distribution of contamination during grinding. Respiratory exposure was high compared to Finnish occupational exposure limit values.

Study of the Induced Anisotropy in Field Annealed Hitperm Alloys by Mössbauer Spectroscopy and Kerr Microscopy

NASA Astrophysics Data System (ADS)

Blázquez, J. S.; Marcin, J.; Andrejka, F.; Franco, V.; Conde, A.; Skorvanek, I.

2016-08-01

Samples of Fe39Co39Nb6B15Cu1 alloy were nanocrystallized under zero field annealing (ZF) and transverse field annealing (TF) conditions. A reduction in coercivity for TF samples with respect to ZF sample (16 and 45 A/m, respectively) is observed. Kerr microscopy images show a well-defined parallel domain structure, transversally oriented to the ribbon axis for the TF sample unlike for the ZF sample, for which a complex pattern is observed with large and small domains at the surface of the ribbon. Although Mössbauer spectra are clearly different for the two studied samples, Mössbauer studies confirm that there is no significant difference between the hyperfine field distributions of TF and ZF samples but only the relative intensity of the 2nd and 3rd lines A 23 (related to the angle between the gamma radiation and the magnetic moments, α). However, for TF annealed samples α = 90 deg ( A 23 = 4), indicating that the magnetic moments lay on the plane of the ribbon in agreement with the well-defined domain structure observed by Kerr microscopy, ZF annealed samples show A 23 = 1.8. This value is close to that of a random orientation ( A 23 = 2) but smaller, indicating a slight preference for out of plane orientations. Moreover, it is clearly smaller than that of the as-cast amorphous samples A 23 = 2.8, with a preference to in-plane orientations. The application of the law of approach to saturation yields a larger effect of the inhomogeneities in ZF sample with respect to TF one.

Role Balance and Depression among College Students: The Moderating Influence of Adult Attachment Orientations

ERIC Educational Resources Information Center

Lopez, Frederick G.; Fons-Scheyd, Alia

2008-01-01

This study examined interrelationships among role balance perceptions, adult attachment orientations, and depression within an ethnically diverse, mixed-gender sample of college students. Adult attachment orientations--and particularly attachment avoidance--significantly interacted with students' role balance levels to predict their depression…

[Comparison of antibacterial effects of different antiseptics after hand washing].

PubMed

Buluş, Nesrin; Kaleli, Ilknur

2004-01-01

The aim of this study was to compare 4% chlorhexidine gluconate, 7.5% povidone iodine and liquid soap, which are used as hand washing solutions for the immediate, cumulative and residual effects in bacterial growth. For this purpose, 18 volunteers washed their hands with 7.5% povidone iodine, 4% chlorhexidine gluconate and liquid soap by applying standard hygienic hand washing technique. In order to find out the bacterial amount in the hands of study group, glove liquid test was used. For the evaluation of immediate effects, samples were collected just after the washing procedure, for the residual effects samples were collected from gloved hands after 3 hours, and for the cumulative effects, samples were collected after 5 days with daily hand washings. It is found that the immediate effects of 4% chlorhexidine gluconate was superior than others, and 7.5% povidone iodine was superior to liquid soap. There was no difference between 4% chlorhexidine gluconate and 7.5% povidone iodine for residual effects. The cumulative effects were observed for 4% chlorhexidine gluconate and 7.5% povidone iodine, while there was no cumulative effect for liquid soap. According to these results, it can be suggested that 4% chlorhexidine gluconate can be used as a reliable antiseptic agent in the hospitals, especially for laboratories, intensive care units and operating rooms, owing to its favourable immediate, residual and cumulative effects.

The effects of violence exposure on the development of impulse control and future orientation across adolescence and early adulthood: Time-specific and generalized effects in a sample of juvenile offenders.

PubMed

Monahan, Kathryn C; King, Kevin M; Shulman, Elizabeth P; Cauffman, Elizabeth; Chassin, Laurie

2015-11-01

Impulse control and future orientation increase across adolescence, but little is known about how contextual factors shape the development of these capacities. The present study investigates how stress exposure, operationalized as exposure to violence, alters the developmental pattern of impulse control and future orientation across adolescence and early adulthood. In a sample of 1,354 serious juvenile offenders, higher exposure to violence was associated with lower levels of future orientation at age 15 and suppressed development of future orientation from ages 15 to 25. Increases in witnessing violence or victimization were linked to declines in impulse control 1 year later, but only during adolescence. Thus, beyond previous experiences of exposure to violence, witnessing violence and victimization during adolescence conveys unique risk for suppressed development of self-regulation.

Design and validation of low-cost assistive glove for hand assessment and therapy during activity of daily living-focused robotic stroke therapy.

PubMed

Nathan, Dominic E; Johnson, Michelle J; McGuire, John R

2009-01-01

Hand and arm impairment is common after stroke. Robotic stroke therapy will be more effective if hand and upper-arm training is integrated to help users practice reaching and grasping tasks. This article presents the design, development, and validation of a low-cost, functional electrical stimulation grasp-assistive glove for use with task-oriented robotic stroke therapy. Our glove measures grasp aperture while a user completes simple-to-complex real-life activities, and when combined with an integrated functional electrical stimulator, it assists in hand opening and closing. A key function is a new grasp-aperture prediction model, which uses the position of the end-effectors of two planar robots to define the distance between the thumb and index finger. We validated the accuracy and repeatability of the glove and its capability to assist in grasping. Results from five nondisabled subjects indicated that the glove is accurate and repeatable for both static hand-open and -closed tasks when compared with goniometric measures and for dynamic reach-to-grasp tasks when compared with motion analysis measures. Results from five subjects with stroke showed that with the glove, they could open their hands but without it could not. We present a glove that is a low-cost solution for in vivo grasp measurement and assistance.

Acute immobilisation facilitates premotor preparatory activity for the non-restrained hand when facing grasp affordances.

PubMed

Kühn, Simone; Werner, Anika; Lindenberger, Ulman; Verrel, Julius

2014-05-15

Use and non-use of body parts during goal-directed action are major forces driving reorganisation of neural processing. We investigated changes in functional brain activity resulting from acute short-term immobilisation of the dominant right hand. Informed by the concept of object affordances, we predicted that the presence or absence of a limb restraint would influence the perception of graspable objects in a laterally specific way. Twenty-three participants underwent fMRI scanning during a passive object-viewing task before the intervention as well as with and without wearing an orthosis. The right dorsal premotor cortex and the left cerebellum were more strongly activated when the handle of an object was oriented towards the left hand while the right hand was immobilised compared with a situation where the hand was not immobilised. The cluster in the premotor cortex showing an interaction between condition (with restraint, without restraint) and stimulus action side (right vs. left) overlapped with the general task vs. baseline contrast prior to the intervention, confirming its functional significance for the task. These results show that acute immobilisation of the dominant right hand leads to rapid changes of the perceived affordance of objects. We conclude that changes in action requirements lead to almost instantaneous changes in functional activation patterns, which in turn may trigger structural cortical plasticity. Copyright © 2014. Published by Elsevier Inc.

Prevalence of Escherichia Coli O157:H7 and Enterobacteriaceae on Hands of Workers in Halal Cattle Abattoirs in Peninsular Malaysia

PubMed Central

Shamsul, Bahri Mohd Tamrin; Adamu, Muhammad Tukur; Mohd Desa, Mohd Nasir; Khairani-Bejo, Siti

2016-01-01

Background Several occupational diseases of multiple origins are encountered among abattoir workers. Presence of indicator microorganisms (coliforms) on hands of workers can be used a gauge for hygienic practices. Methods A cross-sectional study was performed to assess the prevalence of E.coli and enterobacteriaceae among Halal abattoir workers in some government halal abattoirs of Malaysia. A total of one hundred and sixty-five hand swab samples were collected from workers of Halal abattoirs in Malaysia. The samples were subjected to microbiological analysis for characterisation and serotyping. Results The results have shown that no Escherichia coli O157:H7 was isolated on the hands of abattoir workers before and after work. However, a total prevalence of 9.7% was recorded for all samples during work. For non-O157:H7, total prevalence of 33.3% during work and 13% after work were obtained. High prevalence was recorded in sample taken during work from Tampin, Jasin and Kemaman (100% each) while low prevalence where observed in Shah Alam, Banting and Ipoh (20% each). Conclusions Based on the findings the hygienic practices of hand washing among the workers in few locations was found to be low especially after work. PMID:27904427

Prevalence of Escherichia Coli O157:H7 and Enterobacteriaceae on Hands of Workers in Halal Cattle Abattoirs in Peninsular Malaysia.

PubMed

Shamsul, Bahri Mohd Tamrin; Adamu, Muhammad Tukur; Mohd Desa, Mohd Nasir; Khairani-Bejo, Siti

2016-09-01

Several occupational diseases of multiple origins are encountered among abattoir workers. Presence of indicator microorganisms (coliforms) on hands of workers can be used a gauge for hygienic practices. A cross-sectional study was performed to assess the prevalence of E.coli and enterobacteriaceae among Halal abattoir workers in some government halal abattoirs of Malaysia. A total of one hundred and sixty-five hand swab samples were collected from workers of Halal abattoirs in Malaysia. The samples were subjected to microbiological analysis for characterisation and serotyping. The results have shown that no Escherichia coli O157:H7 was isolated on the hands of abattoir workers before and after work. However, a total prevalence of 9.7% was recorded for all samples during work. For non-O157:H7, total prevalence of 33.3% during work and 13% after work were obtained. High prevalence was recorded in sample taken during work from Tampin, Jasin and Kemaman (100% each) while low prevalence where observed in Shah Alam, Banting and Ipoh (20% each). Based on the findings the hygienic practices of hand washing among the workers in few locations was found to be low especially after work.

Tidal asymmetry and residual circulation over linear sandbanks and their implication on sediment transport: a process-oriented numerical study

USGS Publications Warehouse

Sanay, Rosario; Voulgaris, George; Warner, John C.

2007-01-01

A series of process-oriented numerical simulations is carried out in order to evaluate the relative role of locally generated residual flow and overtides on net sediment transport over linear sandbanks. The idealized bathymetry and forcing are similar to those present in the Norfolk Sandbanks, North Sea. The importance of bottom drag parameterization and bank orientation with respect to the ambient flow is examined in terms of residual flow and overtide generation, and subsequent sediment transport implications are discussed. The results show that although the magnitudes of residual flow and overtides are sensitive to bottom roughness parameterization and bank orientation, the magnitude of the generated residual flow is always larger than that of the locally generated overtides. Also, net sediment transport is always dominated by the nonlinear interaction of the residual flow and the semidiurnal tidal currents, although cross-bank sediment transport can occur even in the absence of a cross-shore residual flow. On the other hand, net sediment divergence/convergence increases as the bottom drag decreases and as bank orientation increases. The sediment erosion/deposition is not symmetric about the crest of the bank, suggesting that originally symmetric banks would have the tendency to become asymmetric.

Comparison of three different techniques for camera and motion control of a teleoperated robot.

PubMed

Doisy, Guillaume; Ronen, Adi; Edan, Yael

2017-01-01

This research aims to evaluate new methods for robot motion control and camera orientation control through the operator's head orientation in robot teleoperation tasks. Specifically, the use of head-tracking in a non-invasive way, without immersive virtual reality devices was combined and compared with classical control modes for robot movements and camera control. Three control conditions were tested: 1) a condition with classical joystick control of both the movements of the robot and the robot camera, 2) a condition where the robot movements were controlled by a joystick and the robot camera was controlled by the user head orientation, and 3) a condition where the movements of the robot were controlled by hand gestures and the robot camera was controlled by the user head orientation. Performance, workload metrics and their evolution as the participants gained experience with the system were evaluated in a series of experiments: for each participant, the metrics were recorded during four successive similar trials. Results shows that the concept of robot camera control by user head orientation has the potential of improving the intuitiveness of robot teleoperation interfaces, specifically for novice users. However, more development is needed to reach a margin of progression comparable to a classical joystick interface. Copyright © 2016 Elsevier Ltd. All rights reserved.

A recommended procedure for the preparation of oriented clay-mineral specimens for X-ray diffraction analysis; modifications to Drever's filter-membrane peel technique

USGS Publications Warehouse

Pollastro, R.M.

1982-01-01

Extremely well-oriented clay mineral mounts for X-ray diffraction analysis can be prepared quickly and without introducing segregation using the filter-membrane peel technique. Mounting problems encountered with smectite-rich samples can be resolved by using minimal sample and partial air-drying of the clay film before transfer to a glass slide. Samples containing small quantities of clay can produce useful oriented specimens if Teflon masks having more restrictive areas are inserted above the membrane filter during clay deposition. War]page and thermal shock of glass slides can be controlled by using a flat, porous, ceramic plate as a holding surface during heat treatments.

The effect of orientation difference in fused deposition modeling of ABS polymer on the processing time, dimension accuracy, and strength

NASA Astrophysics Data System (ADS)

Tanoto, Yopi Y.; Anggono, Juliana; Siahaan, Ian H.; Budiman, Wesley

2017-01-01

There are several parameters that must be set before manufacturing a product using 3D printing. These parameters include the orientation deposition of that product, type of material, form fill, fill density, and other parameters. The finished product of 3D printing has some responses that can be observed, measured, and tested. Some of those responses are the processing time, the dimensions of the end product, its surface roughness and the mechanical properties, i.e. its yield strength, ultimate tensile strength, and impact resistance. This research was conducted to study the relationship between process parameters of 3D printing machine using a technology of fused deposition modeling (FDM) and the generated responses. The material used was ABS plastic that was commonly used in the industry. Understanding the relationship between the parameters and the responses thus the resulting product can be manufactured to meet the user needs. Three different orientations in depositing the ABS polymer named XY(first orientation), YX (second orientation), and ZX (third orientation) were studied. Processing time, dimensional accuracy, and the product strength were the responses that were measured and tested. The study reports that the printing process with third orientation was the fastest printing process with the processing time 2432 seconds followed by orientation 1 and 2 with a processing time of 2688 and 2780 seconds respectively. Dimension accuracy was also measured from the width and the length of gauge area of tensile test specimens printed in comparison with the dimensions required by ASTM 638-02. It was found that the smallest difference was in thickness dimension, i.e. 0.1 mm thicker in printed sample using second orientation than as required by the standard. The smallest thickness deviation from the standard was measured in width dimension of a sample printed using first orientation (0.13 mm). As with the length dimension, the closest dimension to the standard was resulted from the third orientation product, i.e 0.2 mm. Tensile test done on all the specimens produced with those three orientations shows that the highest tensile strength was obtained in sample from second orientation deposition, i.e. 7.66 MPa followed by the first and third orientations products, i.e. 6.8 MPa and 3.31 MPa, respectively.

Commercial Ethyl Glucuronide (EtG) and Ethyl Sulfate (EtS) Testing is not Vulnerable to Incidental Alcohol Exposure in Pregnant Women

PubMed Central

Beatty, Jessica R.; Rosano, Thomas G.; Strickler, Ronald C.; Graham, Amy E.; Sokol, Robert J.

2016-01-01

Background Ethyl Glucoronide (EtG) and Ethyl Sulfate (EtS) have shown promise as biomarkers for alcohol and may be sensitive enough for use with pregnant women in whom even low-level alcohol use is important. However, there have been reports of over-sensitivity of EtG and EtS to incidental exposure to sources such as alcohol-based hand sanitizer. Further, few studies have evaluated these biomarkers among pregnant women, in whom the dynamics of these metabolites may differ. Objectives This study evaluated whether commercial EtG-EtS testing was vulnerable to high levels of environmental exposure to alcohol in pregnant women. Methods Two separate samples of five nurses—one pregnant and the other postpartum, all of whom reported high levels of alcohol-based hand sanitizer use—provided urine samples before and 4–8 hours after rinsing with alcohol-based mouthwash and using hand sanitizer. The five pregnant nurses provided urine samples before, during, and after an 8-hour nursing shift, during which they repeatedly cleansed with alcohol-based hand sanitizer (mean 33.8 uses). The five postpartum nurses used hand sanitizer repeatedly between baseline and follow-up urine samples. Results No urine samples were positive for EtG-EtS at baseline or follow-up, despite use of mouthwash and—in the pregnant sample—heavy use of hand sanitizer (mean of 33.8 uses) throughout the 8-hour shift. Conclusions/Importance Current, commercially available EtG-EtS testing does not appear vulnerable to even heavy exposure to incidental sources of alcohol among pregnant and postpartum women. PMID:26771303

Quantitative motor assessment of muscular weakness in myasthenia gravis: a pilot study.

PubMed

Hoffmann, Sarah; Siedler, Jana; Brandt, Alexander U; Piper, Sophie K; Kohler, Siegfried; Sass, Christian; Paul, Friedemann; Reilmann, Ralf; Meisel, Andreas

2015-12-23

Muscular weakness in myasthenia gravis (MG) is commonly assessed using Quantitative Myasthenia Gravis Score (QMG). More objective and quantitative measures may complement the use of clinical scales and might detect subclinical affection of muscles. We hypothesized that muscular weakness in patients with MG can be quantified with the non-invasive Quantitative Motor (Q-Motor) test for Grip Force Assessment (QGFA) and Involuntary Movement Assessment (QIMA) and that pathological findings correlate with disease severity as measured by QMG. This was a cross-sectional pilot study investigating patients with confirmed diagnosis of MG. Data was compared to healthy controls (HC). Subjects were asked to lift a device (250 and 500 g) equipped with electromagnetic sensors that measured grip force (GF) and three-dimensional changes in position and orientation. These were used to calculate the position index (PI) and orientation index (OI) as measures for involuntary movements due to muscular weakness. Overall, 40 MG patients and 23 HC were included. PI and OI were significantly higher in MG patients for both weights in the dominant and non-dominant hand. Subgroup analysis revealed that patients with clinically ocular myasthenia gravis (OMG) also showed significantly higher values for PI and OI in both hands and for both weights. Disease severity correlates with QIMA performance in the non-dominant hand. Q-Motor tests and particularly QIMA may be useful objective tools for measuring motor impairment in MG and seem to detect subclinical generalized motor signs in patients with OMG. Q-Motor parameters might serve as sensitive endpoints for clinical trials in MG.

[Psychometric evaluation of the Coach Orientation Questionnaire with a Spanish sample of handball coaches].

PubMed

Feu, Sebastián; Ibáñez, Sergio José; Graça, Amândio; Sampaio, Jaime

2007-11-01

The purpose of this study was to develop a questionnaire to investigate volleyball coaches' orientations toward the coaching process. The study was preceded by four developmental stages in order to improve user understanding, validate the content, and refine the psychometric properties of the instrument. Participants for the reliability and validity study were 334 Spanish volleyball team coaches, 86.5% men and 13.2% women. The following 6 factors emerged from the exploratory factor analysis: team-work orientation, technological orientation, innovative orientation, dialogue orientation, directive orientation, and social climate orientation. Statistical results indicated that the instrument produced reliable and valid scores in all the obtained factors (a> .70), showing that this questionnaire is a useful tool to examine coaches' orientations towards coaching.

The Observed Longitudinal Relationship between Future Orientation and Substance Use Among a Cohort of Youth with Serious Criminal Offenses.

PubMed

Brooks, Merrian; Miller, Elizabeth; Abebe, Kaleab; Mulvey, Edward

2018-03-06

Future orientation (FO), an essential construct in youth development, encompassing goals, expectations for life, and ability to plan for the future. This study uses a multidimensional measure of future orientation to assess the relationship between change in future orientation and change in substance use over time. Data were from the Pathways to Desistence study. Justice involved youth (n = 1,354), ages 14 to 18 at time of recruitment, completed interviews every six months for three years. Multiple measures were chosen a priori as elements of future orientation. After evaluating the psychometrics of a new measure for future orientation, we ran mixed effects cross-lagged panel models to assess the relationship between changes in future orientation and substance use (tobacco, marijuana, hard drugs, and alcohol). There was a significant bidirectional relationship between future orientation and all substance use outcomes. Adjusted models accounted for different sites, sex, age, ethnicity, parental education, and proportion of time spent in a facility. In adjusted models, higher levels of future orientation resulted in smaller increases in substance use at future time points. Future orientation and substance use influence each other in this sample of adolescent offenders. Treating substance use disorders is also likely to increase future orientation, promoting positive youth development more generally. This study expands our understanding of the longitudinal relationship between changes in future orientation and changes in levels of substance use in a sample of justice involved youth with high levels of substance use, a group of considerable clinical and policy interest.