Archaean lode gold deposits: the solute source problem

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kerrich, R.

1985-01-01

On a regional scale lode gold deposits typically occur throughout the entire spectrum of greenstone belt stratigraphy. In the Abitibi Belt lode deposits are sited at the base of the volcanic cycle (Noranda), at the boundary of two volcanic cycles (Timmins) and in the stratigraphically highest groups at Kirkland Lake and Bousquet. The gold deposits are preferentially disposed along major structures apparently demarking rift zones, where extension was accommodated by listric normal faults that subsequently acted as thrusts during compression. These major structures were also sites of emplacement of trondhjemite magmas, lamprophyres and potassic basalts. From previous work Abitibi Beltmore » volcanism spans 2725 to 2703 Ma, batholith emplacement 2675 to 2685 Ma (U-Pb on zircons), and the terminal Matachewan dyke swarm which transects all major structures is 2690 +/- 93 Ma. The lode deposits have age corrected /sup 87/Sr//sup 86/Sr initials of 0.7015 to 0.7025, as well as more radiogenic Pb and higher ..mu.. relative to contemporaneous mantle Sr and Pb isotope ratios. Tourmaline, scheelite, piemontite and apatites separated from 14 deposits all possess /sup 87/Sr//sup 86/Sr 0.7015 to 0.7025. These more radiogenic values contra-indicate a direct mantle source for Sr and Pb, but rather indicate that all mineralizing fluids carry contributions from a felsic crustal source having a significant production of Rb, U and Th radiogenic daughter nuclides as well as from komatiites and tholeiites. Gold, along with an array of lithophile elements including K, Rb, Pb, Li, Sr and CO/sub 2/ were distilled from this mixed source.« less

Geology and ore deposits of the Casto quadrangle, Idaho

USGS Publications Warehouse

Ross, Clyde P.

1934-01-01

The study of the Casto quadrangle was undertaken as the first item in a project to obtain more thorough knowledge of the general geology of southcentral Idaho on which to base study of the ore deposits of t he region. The quadrangle conta ins fragmentary exposures of Algonkian and Paleozoic sedimentary rocks, extensive deposits of old volcanic strata, presumably Permian, not heretofore recognized in this part of Idaho, and a thick succession of Oligocene(?) lava and pyroclastic rocks. The Idaho batholith and its satellites extend into the quadrangle, and in addition there a re large masses of Tertiary granitic rock, not previously distinguished in Idaho, and many Tertiary dikes, some of which are genetically associated with contact-metamorphic deposits. The area contains injection gneiss of complex origin, largely related to the Idaho batholith but in part resulting from injection by ~he Tertiary granitic rocks under relatively light load. Orogenic movement took place in Algonkian, Paleozoic, and Tertiary time. There is a summit peneplain or par tial peneplain of Tertiary, perhaps Pliocene age, and the erosional history since its elevation has been complex. The ore deposits include lodes and placers. The lodes are related to both the Idaho batholith and the Tert iary intrusive rocks and have yielded gold and copper ore of a total value of about 1,000,000. Placers, largely formed in an interglacial inter val, have yielded about an equal amount. There has been some prospecting but almost no production since 1916.

Mineral resource of the month: gold

USGS Publications Warehouse

George, Micheal W.

2009-01-01

The article presents information on the valuable mineral called gold. It states that early civilizations valued gold because of its scarcity, durability and characteristics yellow color. By the late 20th century, gold was used as an industrial metal because of its unique physicochemical properties. The U.S. has several productive deposits of gold, including placer, gold-quartz lode, epithermal and Carlin-type gold deposits.

25 CFR 214.8 - Acreage limitation.

Code of Federal Regulations, 2010 CFR

2010-04-01

... excess of the following areas: (a) For deposits of the nature of lodes, or veins containing ores of gold, silver, copper, or other useful metals, 640 acres. (b) For beds of placer gold, gypsum, asphaltum...

25 CFR 214.8 - Acreage limitation.

Code of Federal Regulations, 2014 CFR

2014-04-01

... excess of the following areas: (a) For deposits of the nature of lodes, or veins containing ores of gold, silver, copper, or other useful metals, 640 acres. (b) For beds of placer gold, gypsum, asphaltum...

25 CFR 214.8 - Acreage limitation.

Code of Federal Regulations, 2012 CFR

2012-04-01

... excess of the following areas: (a) For deposits of the nature of lodes, or veins containing ores of gold, silver, copper, or other useful metals, 640 acres. (b) For beds of placer gold, gypsum, asphaltum...

25 CFR 214.8 - Acreage limitation.

Code of Federal Regulations, 2013 CFR

2013-04-01

... excess of the following areas: (a) For deposits of the nature of lodes, or veins containing ores of gold, silver, copper, or other useful metals, 640 acres. (b) For beds of placer gold, gypsum, asphaltum...

25 CFR 214.8 - Acreage limitation.

Code of Federal Regulations, 2011 CFR

2011-04-01

... excess of the following areas: (a) For deposits of the nature of lodes, or veins containing ores of gold, silver, copper, or other useful metals, 640 acres. (b) For beds of placer gold, gypsum, asphaltum...

Precious metals associated with Late Cretaceous-early Tertiary igneous rocks of southwestern Alaska

USGS Publications Warehouse

Bundtzen, Thomas K.; Miller, Marti L.; Goldfarb, Richard J.; Miller, Lance D.

1997-01-01

Placer gold and precious metal-bearing lode deposits of southwestern Alaska lie within a region 550 by 350 km, herein referred to as the Kuskokwim mineral belt. This mineral belt has yielded 100,240 kg (3.22 Moz) of gold, 12, 813 kg (412,000 oz) of silver, 1,377,412 kg (39,960 flasks) of mercury, and modest amounts of antimony and tungsten derived primarily from the late Cretaceous-early Tertiary igneous complexes of four major types: (1) alkali-calcic, comagmatic volcanic-plutonic complexes and isolated plutons, (2) calc-alkaline, meta-aluminous reduced plutons, (3) peraluminous alaskite or granite-porphyry sills and dike swarms, and (4) andesite-rhyolite subaerial volcanic rocks.About 80 percent of the 77 to 52 Ma intrusive and volcanic rocks intrude or overlie the middle to Upper Cretaceous Kuskokwim Group sedimentary and volcanic rocks, as well as the Paleozoic-Mesozoic rocks of the Nixon Fork, Innoko, Goodnews, and Ruby preaccretionary terranes.The major precious metal-bearing deposit types related to Late Cretaceous-early Tertiary igneous complexes of the Kuskokwim mineral belt are subdivided as follows: (1) plutonic-hosted copper-gold polymetallic stockwork, skarn, and vein deposits, (2) peraluminous granite-porphory-hosted gold polymetallic deposits, (3) plutonic-related, boron-enriched silver-tin polymetallic breccia pipes and replacement deposits, (4) gold and silver mineralization in epithermal systems, and (5) gold polymetallic heavy mineral placer deposits. Ten deposits genetically related to Late Cretaceous-early Tertiary intrusions contain minimum, inferred reserves amounting to 162,572 kg (5.23 Moz) of gold, 201,015 kg (6.46 Moz) silver, 12,160 metric tons (t) of tin, and 28,088 t of copper.The lodes occur in veins, stockworks, breccia pipes, and replacement deposits that formed in epithermal to mesothermal temperature-pressure conditions. Fluid inclusion, isotopic age, mineral assemblage, alteration assemblage, and structural data indicate that many of the mineral deposits associated with Late Cretaceous-early tertiary volcanic and plutonic rocks represent geologically and spatially related, vertically zoned hydrothermal systems now exposed at several erosional levels.Polymetallic gold deposits of the Kuskokwim mineral belt are probably related to 77 to 52 Ma plutonism and volcanism associated with a period of rapid, north-directed subduction of the Kula plate. The geologic interpretation suggests that igneous complexes of the Kuskokwim mineral belt formed in an intracontinental back-arc setting during a period of extensional, wrench fault tectonics.The Kuskokwim mineral belt has many geologic and metallogenic features similar to other precious metal-bearing systems associated with arc-related igneous rocks such as the Late Cretaceous-early Tertiary Rocky Mountain alkalic province, the Jurassic Mount Milligan district of central British Columbia, the Andean orogen of South America, and the Okhotsk-Chukotka belt of northeast Asia.

Gold deposits of the northern margin of the North China craton: Multiple late Paleozoic-Mesozoic mineralizing events

USGS Publications Warehouse

Hart, C.J.R.; Goldfarb, R.J.; Qiu, Yumin; Snee, L.; Miller, L.D.; Miller, M.L.

2002-01-01

The northern margin of the North China craton is well-endowed with lode gold deposits hosting a resource of approximately 900 tonnes (t) of gold. The ???1,500-km-long region is characterized by east-trending blocks of metamorphosed Archean and Proterozoic strata that were episodically uplifted during Variscan, Indosinian, and Yanshanian deformational and magmatic events. At least 12 gold deposits from the Daqinshan, Yan-Liao (includes the Zhangjiakou, Yanshan, and Chifeng gold districts), and Changbaishan gold provinces contain resources of 20-100 t Au each. Most deposits are hosted in uplifted blocks of Precambrian metamorphic rocks, although felsic Paleozoic and Mesozoic plutons are typically proximal and host ???30% of the deposits. The lodes are characterized by sulfide-poor quartz veins in brittle structures with low base metal values and high Au:Ag ratios. Although phyllic alteration is most common, intensive alkali feldspar metasomatism characterizes the Wulashan, Dongping, and Zhongshangou deposits, but is apparently coeval with Variscan alkalic magmatism only at Wulashan. Stepwise 40Ar-39Ar geochronology on 16 samples from gangue and alteration phases, combined with unpublished SHRIMP U-Pb dates on associated granitoids, suggest that gold mineralizing events occured during Variscan, Indosinian, and Yanshanian orogenies at circa 350, 250, 200, 180, 150, and 129 Ma. However, widespread Permo-Triassic (???250 Ma) and Early Jurassic (???180 Ma) thermal events caused variable resetting of most of the white mica and K-feldspar argon spectra, as well as previously reported K-Ar determinations. Compiled and new stable isotope and fluid inclusion data show that most ??18O values for ore-stage veins range from 8 to 14???, indicating a fluid in equilibrium with the Precambrian metamorphic basement rocks; ??D values from fluid inclysions range widely from -64 to -154???, which is indicative of a local meteoric component in some veins; and highly variable ??34S data (+ 7 to -17???), even within individual deposits, indicate various local country-rock sources for sulfur. Fluid inclusions from all districts show variable homogenization temperatures between 240 and 400 ??C, and are consistently characterized by low salinity, H2O-CO2 ?? CH4, N2 solutions. Although the data are largely consistent with that from orogenic gold veins, intrusion-related veins and epithermal veins are also recognized. The multiple episodes of mineralization are coincident with episodic tectonic reactivations and associated magmatism along the northern margin of the North China craton. Electronic supplementary material to this paper can be obtained by using the Springer LINK server located at http://dx.doi.org/ 10.1007/s00126-001-0239-2.

Structural setting of Fimiston- and Oroya-style pyrite-telluride-gold lodes, Paringa South mine, Golden Mile, Kalgoorlie: 1. Shear zone systems, porphyry dykes and deposit-scale alteration zones

NASA Astrophysics Data System (ADS)

Mueller, Andreas G.

2017-07-01

The Golden Mile in the 2.7 Ga Eastern Goldfields Province of the Yilgarn Craton, Western Australia, has produced 385 million tonnes of ore at a head grade of 5.23 g/t gold (1893-2016). Gold-pyrite ore bodies (Fimiston Lodes) trace kilometre-scale shear zone systems centred on the D2 Golden Mile Fault, one of three northwest striking sinistral strike-slip faults segmenting upright D1 folds. The Fimiston shear zones formed as D2a Riedel systems in greenschist-facies (actinolite-albite) tholeiitic rocks, the 700-m-thick Golden Mile Dolerite (GMD) sill and the Paringa Basalt (PB), during left-lateral displacement of up to 12 km on the D2 master faults. Pre-mineralisation granodiorite dykes were emplaced into the D2 shear zones at 2674 ± 6 Ma, and syn-mineralisation diorite porphyries at 2663 ± 11 Ma. The widespread infiltration of hydrothermal fluid generated chlorite-calcite and muscovite-ankerite alteration in the Golden Mile, and paragonite-ankerite-chloritoid alteration southeast of the deposit. Fluid infiltration reactivated the D2 shear zones causing post-porphyry displacement of up to 30 m at principal Fimiston Lodes moving the southwest block down and southeast along lines pitching 20°SE. D3 reverse faulting at the southwest dipping GMD-PB contact of the D1 Kalgoorlie Anticline formed the 1.3-km-long Oroya Shoot during late gold-telluride mineralisation. Syn-mineralisation D3a reverse faulting alternated with periods of sinistral strike-slip (D2c) until ENE-WSW shortening prevailed and was accommodated by barren D3b thrusts. North-striking D4 strike-slip faults of up to 2 km dextral displacement crosscut the Fimiston Lodes and the barren thrusts, and control gold-pyrite quartz vein ore at Mt. Charlotte (2651 ± 9 Ma).

Integrating geologic and satellite imagery data for high-resolution mapping and gold exploration targets in the South Eastern Desert, Egypt

NASA Astrophysics Data System (ADS)

Zoheir, Basem; Emam, Ashraf

2012-05-01

The granitoid-greenstone belts of the Arabian-Nubian Shield are well-endowed with lode gold and massive sulfide ores. Although generally characterized by excellent outcrops and arid desert realm, poor accessibility and lack of finance have been always retardant to detailed geologic mapping of vast areas of the shield. Lack of comprehensive geological information and maps at appropriate scales would definitely hinder serious exploration programs. In this study, band ratioing, principal component analysis (PCA), false-color composition (FCC), and frequency filtering (FFT-RWT) of ASTER and ETM+ data have substantially improved visual interpretation for detailed mapping of the Gebel Egat area in South Eastern Desert of Egypt. By compiling field, petrographic and spectral data, controls on gold mineralization have been assessed in terms of association of gold lodes with particular lithological units and structures. Contacts between foliated island arc metavolcanics and ophiolites or diorite are likely to be favorable loci for auriferous quartz veins, especially where the NW-SE foliation is deflected into steeply dipping NNW-trending shear planes. High-resolution mapping of the greenstone belt, structures and alteration zones associated with gold lodes in the study area suggests that dilatation by foliation deflection was related to emplacement of the Egat granitic intrusion, attendant with a sinistral transpression regime (i.e., ˜640-550 Ma?). Gold mineralization associated with granitoid intrusions in transpression-induced pull-apart structures elsewhere in the Eastern Desert (e.g., Fawakhir, Sukari and Hangaliya mines) emphasize the reliability of this setting as a model for gold exploration targets in greenstone terrains of Egypt, and may be elsewhere in the Arabian-Nubian Shield.

Orogenic gold deposits: a proposed classification in the context of their crustal distribution and relationship to other gold deposit types

USGS Publications Warehouse

Groves, D.I.; Goldfarb, R.J.; Gebre-Mariam, M.; Hagemann, S.G.; Robert, F.

1998-01-01

The so-called 'mesothermal' gold deposits are associated with reginally metamorphosed terranes of all ages. Ores were formed during compressional to transpressional deformation processes at convergent plate margins in accretionary and collisional orogens. In both types of orogen, hydrated marine sedimentary and volcanic rocks have been added to continental margins during tens to some 100 million years of collision. Subduction-related thermal events, episodically raising geothermal gradients within the hydrated accretionary sequences, initiate and drive long-distance hydrothermal fluid migration. The resulting gold-bearing quartz veins are emplaced over a unique depth range for hydrothermal ore deposits, with gold deposition from 15-20 km to the near surface environment. On the basis of this broad depth range of formation, the term 'mesothermal' is not applicable to this deposit types as a whole. Instead, the unique temporal and spatial association of this deposit type with orogeny means that the vein systems are best termed orogenic gold deposits. Most ores are post-orogenic with respect to to tectonism of their immediate host rocks, but are simultaneously syn-orogenic with respect to ongoing deep-crustal, subduction-related thermal processes and the prefix orogenic satisfies both these conditions. On the basis of their depth of formation, the orogenic deposits are best subdivided into epizonal (12 km) classes.

Oblique map of the northern Sierra Nevada, California, showing location of gold-bearing areas

USGS Publications Warehouse

Alpha, T.R.; Dodge, F.C.W.; Bliss, J.D.

1987-01-01

Locations of lode gold prospects and mines shown on the map were obtained from the U.S. Geological Survey's Mineral Resource Data System (MRDS), a computerized mineral-resource information file, and plotted in their respective locations (D.F. Huber, written commun., 1986). Some locations from two northern counties, missing from the MRDS retrival, were added. The twenty lode mines believed to be the most productive are cited in table 1. A total of nearly 4,000 sites, including both prospects and mines, were initially plotted, but about a third of those were obscured by topography on the oblique map. Locations of Tertiary river channels and gold-dredging fields were taken from published general references modified by examining specific sources and by cursory field examination. Seven of the major dredge fields are identified in table 2.

Orogenic gold and geologic time: A global synthesis

USGS Publications Warehouse

Goldfarb, R.J.; Groves, D.I.; Gardoll, S.

2001-01-01

Orogenic gold deposits have formed over more than 3 billion years of Earth's history, episodically during the Middle Archean to younger Precambrian, and continuously throughout the Phanerozoic. This class of gold deposit is characteristically associated with deformed and metamorphosed mid-crustal blocks, particularly in spatial association with major crustal structures. A consistent spatial and temporal association with granitoids of a variety of compositions indicates that melts and fluids were both inherent products of thermal events during orogenesis. Including placer accumulations, which are commonly intimately associated with this mineral deposit type, recognized production and resources from economic Phanerozoic orogenic-gold deposits are estimated at just over one billion ounces gold. Exclusive of the still-controversial Witwatersrand ores, known Precambrian gold concentrations are about half this amount. The recent increased applicability of global paleo-reconstructions, coupled with improved geochronology from most of the world's major gold camps, allows for an improved understanding of the distribution pattern of orogenic gold in space and time.

A new indicator mineral methodology based on a generic Bi-Pb-Te-S mineral inclusion signature in detrital gold from porphyry and low/intermediate sulfidation epithermal environments in Yukon Territory, Canada

NASA Astrophysics Data System (ADS)

Chapman, R. J.; Allan, M. M.; Mortensen, J. K.; Wrighton, T. M.; Grimshaw, M. R.

2017-12-01

Porphyry-epithermal and orogenic gold are two of the most important styles of gold-bearing mineralization within orogenic belts. Populations of detrital gold resulting from bulk erosion of such regions may exhibit a compositional continuum wherein Ag, Cu, and Hg in the gold alloy may vary across the full range exhibited by natural gold. This paper describes a new methodology whereby orogenic and porphyry-epithermal gold may be distinguished according to the mineralogy of microscopic inclusions observed within detrital gold particles. A total of 1459 gold grains from hypogene, eluvial, and placer environments around calc-alkaline porphyry deposits in Yukon (Nucleus-Revenue, Casino, Sonora Gulch, and Cyprus-Klaza) have been characterized in terms of their alloy compositions (Au, Ag, Cu, and Hg) and their inclusion mineralogy. Despite differences in the evolution of the different magmatic hydrothermal systems, the gold exhibits a clear Bi-Pb-Te-S mineralogy in the inclusion suite, a signature which is either extremely weak or (most commonly) absent in both Yukon orogenic gold and gold from orogenic settings worldwide. Generic systematic compositional changes in ore mineralogy previously identified across the porphyry-epithermal transition have been identified in the corresponding inclusion suites observed in samples from Yukon. However, the Bi-Te association repeatedly observed in gold from the porphyry mineralization persists into the epithermal environment. Ranges of P-T-X conditions are replicated in the geological environments which define generic styles of mineralization. These parameters influence both gold alloy composition and ore mineralogy, of which inclusion suites are a manifestation. Consequently, we propose that this methodology approach can underpin a widely applicable indicator methodology based on detrital gold.

Geological characteristics and ore-forming process of the gold deposits in the western Qinling region, China

NASA Astrophysics Data System (ADS)

Liu, Jiajun; Liu, Chonghao; Carranza, Emmanuel John M.; Li, Yujie; Mao, Zhihao; Wang, Jianping; Wang, Yinhong; Zhang, Jing; Zhai, Degao; Zhang, Huafeng; Shan, Liang; Zhu, Laimin; Lu, Rukui

2015-05-01

The western Qinling, belonging to the western part of the Qinling-Dabie-Sulu orogen between the North China Block and South China Block, is one of the most important gold regions in China. Isotopic dates suggest that the Mesozoic granitoids in the western Qinling region emplaced during the Middle-Late Triassic, and the deposits formed during the Late Triassic. Almost all gold deposits in the western Qinling region are classified as orogenic, Carlin-type, and Carlin-like gold deposits, and they are the products of Qinling Orogenesis caused by the final collision between the North China Block and the South China Block. The early subduction of the Mian-Lue oceanic crust and the latter collision between South Qinling Terrane and the South China Block along the Mian-Lue suture generated lithosphere-scale thermal anomalies to drive orogen-scale hydrothermal systems. The collision-related magmatism also provided heat source for regional ore-forming fluids in the Carlin-like gold deposits. Orogenic gold deposits such as Huachanggou, Liziyuan, and Baguamiao lie between the Shang-Dan and Mian-Lue sutures and are confined to WNW-trending brittle-ductile shear zones in Devonian and Carboniferous greenschist-facies metasedimentary rocks that were highly-deformed and regionally-metamorphosed. These deposits are typical orogenic gold deposits and formed within a Late Triassic age. The deposits show a close relationship between Au and Ag. Ores contain mainly microscopic gold, and minor electrum and visible gold, along with pyrite. The ore-forming fluids were main metamorphic fluids. Intensive tectonic movements caused by orogenesis created fluid-migrating channels for precipitation locations. Although some orogenic gold deposits occur adjacent to granitoids, mineralization is not synchronous with magmatism; that is, the granitoids have no genetic relations to orogenic gold deposits. As ore-forming fluids converged into dilated fractures during the extension stage of orogenesis, changes of physico-chemical conditions resulted in fluid immiscibility that played a key role in gold and sulfide deposition. The geochemical and mineralogical characteristics of the Carlin-type deposits in the western Qinling region are similar to those in the Carlin trend, Nevada, USA. Gold deposits such as La'erma and Jinlongshan occur mostly in the southeastern margin of the western Qinling regionic region whereas some deposits occur in its eastern part. These deposits are hosted in slightly metamorphosed Cambrian to Triassic sedimentary rocks, showing structurally- and stratigraphically-controlled features. The deposits mainly contain submicroscopic and microscopic gold in arsenian pyrite and arsenopyrite, with characteristic ore-forming elements of Au-As-Sb-Ba. The ore-forming fluids are early-stocked formation water and later-recharged meteoric water. Meteoric water apparently evolved in ore-forming fluids by circulation, indicating the extensional setting, and led to the deposition of Au and other elements in cool reactive permeable rocks at shallow levels, forming the disseminated ores. Carlin-like gold deposits occur between the Shang-Dan suture and the Fengxian-Zhen'an fault. The host rocks are mainly sedimentary rocks that underwent reconstruction through reworking by structural metamorphism. These deposits are structurally controlled by brittle-ductile shear zone and occur adjacent to granitoid plutons. The most important characteristic that differ to the orogenic and Carlin-type gold deposits is the genetic relationship with the synchronous magmatism. Gold occurs mainly as microscopic gold. Pyrite and arsenian pyrite can be recognized as gold-bearing minerals. The ore-forming fluids are main magmatic water mixed with metamorphic and/or formation water. Similar to orogenic gold deposits, fluid immiscibility caused the deposition of gold Carlin-like gold deposits.

Isotopic studies of mariposite-bearing rocks from the south- central Mother Lode, California.

USGS Publications Warehouse

Kistler, R.W.; Dodge, F.C.W.; Silberman, M.L.

1983-01-01

Gold-bearing vein formation in the Mother Lode belt of the study area apparently occurred during the Early Cretaceous between 127 and 108 m.y. B.P. The hydrothermal fluids that carried the gold precipitated quartz and mariposite at approx 320oC, similar to the T of precipitation of gold-bearing quartz veins in the Allegheny district. The O- and H-isotopic composition calculated for the fluid indicate that it was similar to formation water or was metamorphic in origin. If the carbonate in the veins was in isotopic equilibrium with this same fluid, it apparently precipitated at a higher T of approx 400oC. The Sr in the carbonate is much less radiogenic than that in any known marine carbonate, but is similar in isotopic composition to that in metamorphosed mafic volcanic rocks of the general region. These mafic rocks could have been the source for the Sr in the hydrothermal veins. This observation supports the contention that the gold-mariposite-quartz-carbonate rocks were formed as an alteration product of serpentinite and other mafic igneous rocks.-A.P.

Rotund versus skinny orogens: Well-nourished or malnourished gold?

USGS Publications Warehouse

Goldfarb, R.J.; Groves, D.I.; Gardoll, S.

2001-01-01

Orogenic gold vein deposits require a particular conjunction of processes to form and be preserved, and their global distribution can be related to broad-scale, evolving tectonic processes throughout Earth history. A heterogeneous distribution of formation ages for these mineral deposits is marked by two major Precambrian peaks (2800-2555 Ma and 2100-1800 Ma), a singular lack of deposits for 1200 m.y. (1800-600 Ma), and relatively continuous formation since then (after 600 Ma). The older parts of the distribution relate to major episodes of continental growth, perhaps controlled by plume-influenced mantle overturn events, in the hotter early Earth (ca. 1800 Ma or earlier). This worldwide process allowed preservation of gold deposits in cratons, roughly equidimensional, large masses of buoyant continental crust. Evolution to a less episodic, more continuous, modern-style plate tectonic regime led to the accretion of volcano-sedimentary complexes as progressively younger linear orogenic belts sorrounding the margins of the more buoyant cratons. The susceptibility of these linear belts to uplift and erosion can explain the overall lack of orogenic gold deposits at 1800-600 Ma, their exposure in 600-50 Ma orogens, the increasing importance of placer deposits back through the Phanerozoic since ca. 100 Ma, and the absence of gold deposits in orogenic belts younger than ca. 50 Ma.

Publications - SR 51 | Alaska Division of Geological & Geophysical Surveys

Science.gov Websites

& Geophysical Surveys Comments: Your help is crucial in the compilation of future Alaska Minerals Resources; Fluorine; Geophysics; Germanium; Gold; Heap Leach; Iron; Jade; Lead; Lode; Mercury; Minerals

Extension and gold mineralisation in the hanging walls of active convergent continental shear zones

NASA Astrophysics Data System (ADS)

Upton, Phaedra; Craw, Dave

2014-07-01

Orogenic gold-bearing quartz veins form in mountain belts adjacent to convergent tectonic boundaries. The vein systems, hosted in extensional structures within compressively deformed rocks, are a widespread feature of these orogens. In many cases the extensional structures that host gold-bearing veins have been superimposed on, and locally controlled by, compressional structures formed within the convergent orogen. Exploring these observations within the context of a three-dimensional mechanical model allows prediction of mechanisms and locations of extensional zones within convergent orogens. Our models explore the effect of convergence angle and mid-crustal strength on stress states and compare them to the Southern Alps and Taiwan. The dilatation zones coincide with the highest mountains, in the hanging walls of major plate boundary faults, and can extend as deep as the brittle-ductile transition. Extensional deformation is favoured in the topographic divide region of oblique orogens with mid-lower crustal rheology that promotes localisation rather than diffuse deformation. In the near surface, topography influences the stress state to a depth approximately equal to the topographic relief, bringing the rock closer to failure and rotating σ1 to near vertical. The distribution of gold-bearing extensional veins may indicate the general position of the topographic divide within exhumed ancient orogens.

Origin of ore-forming fluids of the Haigou gold deposit in the eastern Central Asian Orogenic belt, NE China: Constraints from H-O-He-Ar isotopes

NASA Astrophysics Data System (ADS)

Zeng, Qingdong; He, Huaiyu; Zhu, Rixiang; Zhang, Song; Wang, Yongbin; Su, Fei

2017-08-01

The Haigou lode deposit contains 40 t of gold at an average grade of 3.5 g/t, and is one of the largest deposits in the Jiapigou gold belt located along the eastern segment of the northern margin of the North China Craton. The deposit comprises 15 gold-bearing quartz veins hosted in a Carboniferous monzonite-monzogranite stock. Cretaceous dikes consisting of diorite, diabase, and granodiorite porphyries are well developed in the deposit. The diorite porphyry dikes (130.4 ± 6.3 Ma) occur together with gold-bearing quartz veins in NNE- and NE-striking faults. Gold-bearing quartz veins crosscut the diorite porphyry dikes, and the veins are in turn crosscut by E-W-striking 124.6 ± 2.2 Ma granodiorite porphyry dikes. The mineralization mainly occurs as auriferous quartz veins with minor amounts of sulfide minerals, including pyrite, galena, chalcopyrite, and molybdenite. Gold occurs as either native gold or calaverite. Common gangue minerals in the deposit include quartz, sericite, and calcite. The deposit is characterized by various types of hydrothermal alteration, including silicification, sericitization, chloritization, potassic alteration, and carbonatization. Three stages of hydrothermal activity have been recognized in the deposit: (1) a barren quartz stage; (2) a polymetallic sulfide (gold) stage; (3) a calcite stage. Fluid inclusions in hydrothermal pyrites have 3He/4He ratios of 0.3 to 3.3 Ra and 40Ar/36Ar ratios of 351 to 1353, indicating mixing of fluids of mantle and crustal origin. Hydrothermal quartz yielded δ18O values of -1.3‰ to +7.2‰ and δD values of fluid inclusions in the quartz vary between -80‰ and -104‰. These stable isotope data also suggest mixing of magmatic and meteoric fluids. Noble gas and stable isotopic data suggest that the ore fluids have a predominant mantle source with a significant crustal component. Based on the spatial association of gold-bearing quartz veins with early Cretaceous intrusions, and the H-O-He-Ar isotopic data from the deposit and intrusions, we propose that gold mineralization in the Haigou deposit was formed in an extensional setting and was related to the early Cretaceous, mantle-derived intrusions.

KALMIOPSIS WILDERNESS, OREGON.

USGS Publications Warehouse

Page, Norman J; Miller, Michael S.

1984-01-01

Geologic, geochemical, geophysical field and laboratory, and mine and prospect studies conducted in the Kalmiopsis Wilderness, Oregon indicate that areas within and immediately adjacent to the wilderness have substantiated mineral-resource potential. The types of mineral resources which occur in these areas include massive sulfide deposits containing copper, zinc, lead, silver and gold; podiform chromite deposits; laterite deposits containing nickel, cobalt, and chromium; lode gold deposits; and placer gold deposits. Past production from existing mines is estimated to have been at least 7000 troy oz of gold, 4000 long tons of chromite, and few tens of tons of copper ore.

Tectonic history of the northern Nabitah fault zone, Arabian Shield, Kingdom of Saudi Arabia

USGS Publications Warehouse

Quick, J.E.; Bosch, Paul S.

1990-01-01

Based on the presence of similar lithologies, similar structure, and analogous tectonic setting, the Mother Lode District in California is reviewed as a model for gold occurrences near the Nabitah fault zone in this report.

Preliminary investigation of gold mineralization in the Pedro Dome-Cleary Summit area, Fairbanks district, Alaska

USGS Publications Warehouse

Pilkington, H.D.; Forbes, R.B.; Hawkins, D.B.; Chapman, R.M.; Swainbank, R.C.

1969-01-01

Anomalous gold values in mineralized veins and hydrothermally altered quartz-mica schist in the Pedro Dome-Cleary Summit area of the Fairbanks district suggest the presence of numerous small low- to high-grade lodes. Anomalous concentrations of gold were found to exist in the wall rocks adjacent to mineralized veins. In general, the gold concentration gradients in these wall rocks are much too steep to increase appreciably the mineable width of the veins. Anomalous gold values were also detected in bedrock samples taken by means of a power auger on the Murphy Dome Road along the southwest extension of the Pedro Dome-Cleary Summit mineralized belt.

Publications - PDF 99-24A | Alaska Division of Geological & Geophysical

Science.gov Websites

Alaska's Mineral Industry Reports AKGeology.info Rare Earth Elements WebGeochem Engineering Geology Alaska Alaska, scale 1:63,360 (6.9 M) Keywords Ar-Ar; Bedrock; Bedrock Geology; Generalized; Geologic; Geologic Map; Geology; Gold; Lode; Non-Metals; Paleontology; Plutonic; Plutonic Hosted; STATEMAP Project

43 CFR 3832.21 - How do I locate a lode or placer mining claim?

Code of Federal Regulations, 2013 CFR

2013-10-01

... bearing gold or valuable detrital minerals; (ii) Hosted in soils, alluvium (deposited by water), eluvium...) Bedded gypsum, limestone, cinders, pumice, and similar mineral deposits; or (iv) Mineral-bearing brine...) BUREAU OF LAND MANAGEMENT, DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) LOCATING MINING CLAIMS...

43 CFR 3832.21 - How do I locate a lode or placer mining claim?

Code of Federal Regulations, 2014 CFR

2014-10-01

... bearing gold or valuable detrital minerals; (ii) Hosted in soils, alluvium (deposited by water), eluvium...) Bedded gypsum, limestone, cinders, pumice, and similar mineral deposits; or (iv) Mineral-bearing brine...) BUREAU OF LAND MANAGEMENT, DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) LOCATING MINING CLAIMS...

43 CFR 3832.21 - How do I locate a lode or placer mining claim?

Code of Federal Regulations, 2011 CFR

2011-10-01

... bearing gold or valuable detrital minerals; (ii) Hosted in soils, alluvium (deposited by water), eluvium...) Bedded gypsum, limestone, cinders, pumice, and similar mineral deposits; or (iv) Mineral-bearing brine...) BUREAU OF LAND MANAGEMENT, DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) LOCATING MINING CLAIMS...

43 CFR 3832.21 - How do I locate a lode or placer mining claim?

Code of Federal Regulations, 2012 CFR

2012-10-01

... bearing gold or valuable detrital minerals; (ii) Hosted in soils, alluvium (deposited by water), eluvium...) Bedded gypsum, limestone, cinders, pumice, and similar mineral deposits; or (iv) Mineral-bearing brine...) BUREAU OF LAND MANAGEMENT, DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) LOCATING MINING CLAIMS...

Testing ore deposit models using in situ U-Pb geochronology of hydrothermal monazite: Paleoproterozoic gold mineralization in northern Australia

NASA Astrophysics Data System (ADS)

Rasmussen, Birger; Sheppard, Stephen; Fletcher, Ian R.

2006-02-01

The inability to establish absolute ages for gold deposition in the Pine Creek orogen of northern Australia has led to conflicting ore deposit models, ranging from intrusion related, which predict that gold mineralization was synchronous with granite magmatism (ca. 1835 1820 Ma), to orogenic, which place ore deposition nearly 100 m.y. later. Here we present ion microprobe U-Pb geochronology for a mineralized quartz reef from Tom's Gully mine, Mount Bundey, Northern Territory, Australia, and nearby granitic rocks and associated contact aureoles. Isotopic dating of zircon and monazite indicates that intrusion and contact metamorphism occurred ca. 1825 Ma, whereas hydrothermal monazite from the auriferous quartz reef gives a mean 207Pb/206Pb age of 1780 ± 10 Ma, interpreted as the time of gold mineralization. Mineralization therefore postdated intrusion by ˜45 m.y. and preceded a postulated ca. 1740 1730 Ma cratonwide orogenic gold event by ˜50 m.y. Hence, neither the intrusion-related model nor the recently proposed orogenic model is applicable. Combined with a reevaluation of age data from the nearby Goodall gold deposit, our data suggest that mineralization coincides with, and may be related to, an episode of regional low-grade metamorphism, deformation, and fluid circulation (Shoobridge event). Our results demonstrate the importance of high-precision in situ geochronology and detailed petrography for deciphering age relationships in ore deposits, and of testing the veracity of models for ore formation.

Gold in minerals and the composition of native gold

USGS Publications Warehouse

Jones, Robert Sprague; Fleischer, Michael

1969-01-01

Gold occurs in nature mainly as the metal and as various alloys. It forms complete series of solid solutions with silver, copper, nickel, palladium, and platinum. In association with the platinum metals, gold occurs as free gold as well as in solid solution. The native elements contain the most gold, followed by the sulfide minerals. Several gold tellurides are known, but no gold selenides have been reported, and only one sulfide, the telluride-sulfide mineral nagyagite, is known. The nonmetallic minerals carry the least gold, and the light-colored minerals generally contain less gold than the dark minerals. Some conclusions in the literature are conflicting in regard to the relation of fineness of native gold to its position laterally and vertically within a lode, the nature of the country rocks, and the location and size of nuggets in a streambed, as well as to the variation of fineness within an individual nugget.

Mineral potential tracts for orogenic, Carlin-like, and epithermal gold deposits in the Islamic Republic of Mauritania, (phase V, deliverable 69): Chapter H in Second projet de renforcement institutionnel du secteur minier de la République Islamique de Mauritanie (PRISM-II)

USGS Publications Warehouse

Goldfarb, Richard J.; Marsh, Erin; Anderson, Eric D.; Horton, John D.; Finn, Carol A.; Beaudoin, Georges

2015-01-01

A preliminary evaluation of these gold data can be used to develop broad, firstorder tracts defining favorable and permissive areas for gold resources; detailed metamorphic and structural maps are required for more detailed future tract definition. Such a first-order assessment can, nonetheless, broadly identify four tracts of gold resource potential. Three of these are favorable for discovery of new orogenic gold deposits. One tract, although not favorable, is nevertheless permissive for discovery of epithermal gold deposits. Tract 1 is defined by favorable medium metamorphic grade greenstone belts within vast areas of unfavorable high metamorphic grade, Mesoarchean and Paleoproterozoic granite-gneiss basement of the Rgueïbat Shield. Faults >200 km in length following the general strike of the greenstone belts; lineament intersections with both exposed and buried parts of greenstone belts within 500 m of the surface, as defined by aeromagnetic data (Finn and Anderson, 2015); and areas of banded iron formation (BIF) in the belts are particularly favorable areas for hosting gold resources in orogenic gold deposits within and along the margins of the greenstone belts. Tracts 2 and 3, also for orogenic gold, reflect the favorable Proterozoic-Cambrian metamorphic rocks of the Northern and Southern Mauritanides, with >200-km-long faults following the general strike of the range, and areas underlain by ultramafic and BIF rocks being particularly favorable. Outcrops of Triassic-Jurassic igneous rocks along the margins of the Taoudeni Basin define tract 4, which is permissive for epithermal gold deposits. Although extensive data are lacking for the area, carbonate units along the northern side of the Taoudeni Basin could be considered permissive host rocks for Carlin-type mineralization, but the deep-water carbonate lithologies are typically not favorable for such. 

Publications - PDF 99-24B | Alaska Division of Geological & Geophysical

Science.gov Websites

Alaska's Mineral Industry Reports AKGeology.info Rare Earth Elements WebGeochem Engineering Geology Alaska (6.4 M) Keywords Ar-Ar; Bedrock; Bedrock Geologic Map; Bedrock Geology; Economic Geology; Geochronology ; Geologic; Geologic Map; Geology; Gold; Lode; Plutonic; Plutonic Hosted; Porphyry; STATEMAP Project; Silver

Application of U-Th-Pb phosphate geochronology to young orogenic gold deposits: New age constraints on the formation of the Grass Valley gold district, Sierra Foothills province, California

USGS Publications Warehouse

Taylor, Ryan D.; Goldfarb, Richard J.; Monecke, Thomas; Fletcher, Ian R.; Cosca, Michael A.; Kelly, Nigel M.

2015-01-01

The Grass Valley orogenic gold district in the Sierra Nevada foothills province, central California, the largest historic gold producer of the North American Cordillera, comprises both steeply dipping east-west (E-W) veins located along lithologic contacts in accreted ca. 300 and 200 Ma oceanic rocks and shallowly dipping north-south (N-S) veins hosted by the Grass Valley granodiorite; the latter have yielded about 70 percent of the 13 million ounces of historic lode gold production in the district. The oceanic host rocks were accreted to the western margin of North America between 200 and 170 Ma, metamorphosed to greenschist and amphibolite facies, and uplifted between 175 and 160 Ma. Large-scale magmatism in the Sierra Nevada occurred between 170-140 Ma and 120-80 Ma, with the Grass Valley granodiorite being emplaced during the older episode of magmatism. Uranium-lead isotopic dating of hydrothermal xenotime yielded the first absolute age of 162±5 Ma for the economically more significant N-S veins. The vein-hosted xenotime, as well as associated monazite, are unequivocally of hydrothermal origin as indicated by textural and chemical characteristics, including grain shape, lack of truncated growth banding, lack of a Eu anomaly, and low U and Th concentrations. Furthermore, the crack-seal texture of the veins, with abundant wallrock slivers, suggests their formation as a result of episodic fluid flow possibly related to reoccurring seismic events, rather than a period of fluid exsolution from an evolving magma. The N-S veins are temporally distinct from a younger 153-151 Ma gold event that was previously reported for the E-W veins. Overlapping U-Pb zircon (159.9±2.2 Ma) and 40Ar/39Ar biotite and hornblende (159.7±0.6 to 161.9±1.4 Ma) ages and geothermobarometric calculations indicate that the Grass Valley granodiorite was emplaced at ca. 160 Ma at elevated temperatures (~800°C) within approximately 3 km of the paleosurface and rapidly cooled to the ambient temperature of the surrounding country rocks (<300°C). The age of the granodiorite is indistinguishable from that of the N-S veins, as recorded by the U-Pb age of xenotime in those veins. Consequently, the N-S veins must have formed between 162 and 157 Ma, the maximum permissive age of magma emplacement and the youngest permissive xenotime U-Pb age, respectively, during an E- to ENE-directed compressional regime. The geochemistry of the Grass Valley granodiorite is consistent with it being the product of arc magmatism. It served as a receptive host for mineralization, but it is has no direct genetic relationship to gold mineralization. Initial uplift of the intrusive mass correlates with the initial voluminous fluid flow event and vein formation at depths of no greater than 3 km. The E-W gold-bearing veins hosted within greenschist-facies country rocks adjacent to the intrusion formed during a second hydrothermal event 5-10 million years later than the magmatism and were contemporaneous with a shift to a transtensional deformation denoted by sinistral strike-slip faulting.

The relationship between gold ore and geotectonic in West Qinling: Evidence from magnetotelluric soundings

NASA Astrophysics Data System (ADS)

Xu, Daili; Huang, Wei; Zhang, Letian

2017-03-01

The West Qinling belt is the westward extensioin of the Qinling-Dabie-Sulu orogen in central China. It links the Kunlun and Qilian orogens to the west and the Songpan-Ganze belt to the south, making it an important tectonics syntaxis in China. According to the collection and analysis of the data of West Qinling Mountains gold deposit metallogenic chronology, the gold deposits in this area can be divided into five groups by time: 225-245 Ma, 220-190 Ma, 170 Ma±, 135-110 Ma, 75-45 Ma. The formation time is related to the geological process at that time. The relationship between the formation of gold deposit and geological structure can be explored by the research on the present geological structures. According to the regional tectonic evolution and magmatic activity, the gold deposits are divided into four metallogenic epoches: from the end of the Indo-Chinese epoch to the early Yanshanian (245-225 Ma), is one of the initial stages of gold mineralization; the early and the middle Yanshanian (220-190 Ma, 170 Ma±), is the main forming time of the gold mineralization in the West Qinling; the late Yanshanian (135-110 Ma), is the superimposed mineralization stage; at last, the effect of Himalayan hydrothermal activity to the gold deposits. Under the support of three projects naemed " the research on the conductivity of the lithosphere of the Central Orogenic in China ", " the MT array observation of the intersection area of COC(Central Orogen in China) and the North-South seismic belt ", " the experiment research of MT standard network observation in the area of Qinghai-Tibetan Plateau and the North-China " (Sinoprobe-01-02), we collected massive magnetotellurics data for futher study of the present geological strusctures to discess the relationship between gold deposites and geotectonic in West Qinling.

Magmatic-vapor expansion and the formation of high-sulfidation gold deposits: Chemical controls on alteration and mineralization

USGS Publications Warehouse

Henley, R.W.; Berger, B.R.

2011-01-01

Large bulk-tonnage high-sulfidation gold deposits, such as Yanacocha, Peru, are the surface expression of structurally-controlled lode gold deposits, such as El Indio, Chile. Both formed in active andesite-dacite volcanic terranes. Fluid inclusion, stable isotope and geologic data show that lode deposits formed within 1500. m of the paleo-surface as a consequence of the expansion of low-salinity, low-density magmatic vapor with very limited, if any, groundwater mixing. They are characterized by an initial 'Sulfate' Stage of advanced argillic wallrock alteration ?? alunite commonly with intense silicification followed by a 'Sulfide' Stage - a succession of discrete sulfide-sulfosalt veins that may be ore grade in gold and silver. Fluid inclusions in quartz formed during wallrock alteration have homogenization temperatures between 100 and over 500 ??C and preserve a record of a vapor-rich environment. Recent data for El Indio and similar deposits show that at the commencement of the Sulfide Stage, 'condensation' of Cu-As-S sulfosalt melts with trace concentrations of Sb, Te, Bi, Ag and Au occurred at > 600 ??C following pyrite deposition. Euhedral quartz crystals were simultaneously deposited from the vapor phase during crystallization of the vapor-saturated melt occurs to Fe-tennantite with progressive non-equilibrium fractionation of heavy metals between melt-vapor and solid. Vugs containing a range of sulfides, sulfosalts and gold record the changing composition of the vapor. Published fluid inclusion and mineralogical data are reviewed in the context of geological relationships to establish boundary conditions through which to trace the expansion of magmatic vapor from source to surface and consequent alteration and mineralization. Initially heat loss from the vapor is high resulting in the formation of acid condensate permeating through the wallrock. This Sulfate Stage alteration effectively isolates the expansion of magmatic vapor in subsurface fracture arrays from any external contemporary hydrothermal activity. Subsequent fracturing is localized by the embrittled wallrock to provide high-permeability fracture arrays that constrain vapor expansion with minimization of heat loss. The Sulfide Stage vein sequence is then a consequence of destabilization of metal-vapor species in response to depressurization and decrease in vapor density. The geology, mineralogy, fluid inclusion and stable isotope data and geothermometry for high-sulfidation, bulk-tonnage and lode deposits are quite different from those for epithermal gold-silver deposits such as McLaughlin, California that formed near-surface in groundwater-dominated hydrothermal systems where magmatic fluid has been diluted to less than about 30%. High sulfidation gold deposits are better termed 'Solfataric Gold Deposits' to emphasize this distinction. The magmatic-vapor expansion hypothesis also applies to the phenomenology of acidic geothermal systems in active volcanic systems and equivalent magmatic-vapor discharges on the flanks of submarine volcanoes. ?? 2010.

Metalliferous deposits of the greater Helena mining region, Montana

USGS Publications Warehouse

Pardee, Joseph Thomas; Schrader, F.C.

1933-01-01

The ore deposits described in this bulletin are distributed through a region of about 3,000 square miles surrounding the city of Helena, Mont. In general the surface of this region is mountainous, but it includes several large intermontane valleys. Large areas in the northern and eastern parts of the region sire underlain by sedimentary rocks of the Algonkian Belt series, and on the northeast and southwest the Belt rocks are overlain without any noticeable angular unconformity by Paleozoic and Mesozoic beds. Oligocene, Miocene, and possibly Pliocene sediments, composed chiefly of volcanic ash and land waste of local origin, occupy large areas in the intermontane valleys and lie unconformably upon Cretaceous and older rocks. A thin veneer of Pleistocene and Recent alluvium generally overspreads the Tertiary. In the extreme northern part of the region are large deposits of glacial drift that represent two stages of the Pleistocene. The principal igneous body of the region is the northern part of the early Tertiary or late Cretaceous Boulder batholitb of quartz monzonite. The main exposure of this body occupies an area of nearly 1,200 square miles and extends southward beyond the limits of the particular region considered. Smaller areas of similar rocks are clustered around this exposure. Most of the exposures probably represent bodies that are connected in depth to form a single mass. The late Cretaceous and older sedimentary rocks are involved in a series of northwestward-trending folds. Along the east side of the region overthrust faults related to the great Lewis overthrust of Glacier National Park cause Belt rocks to overlie rocks of Paleozoic and Mesozoic ages. Large normal faults occur near Marysville and faults of moderate displacement near Helena. The Tertiary beds are slightly deformed by folds and faults that are unrelated to the structure of the older rock. The geologic history of the region includes two contrasting periods, the earlier of which was characterized by the accumulation of marine sediments and the later by mountain building and erosion. The later period began with folding and elevation in late Cretaceous or early Eocene time, followed by overthrust faulting and the intrusion of the Boulder batholith. Next, there ensued a period of crustal stability, during which erosion reduced the region to a surface of low relief and cut away at least 10,000 feet of strata in the area north of Helena. In Oligocene, Miocene, and Pliocene (?) time sediments composed of land waste and volcanic ash were deposited, and this event was followed by warping and faulting that elevated the present mountains. During Pliocene and Pleistocene time the mountains were maturely dissected, and in middle and late Pleistocene time local glaciers formed in the higher mountains and large valley glaciers invaded the extreme northern part of the region. The ore deposits include lodes and placers that have yielded gold, silver, lead, copper, and zinc to a value of at least $176,860,000. The placers were formed mostly during interglacial stages of the Pleistocene. They have been almost entirely exhausted. Most of the lodes are classified as regards age in two groups, an older and a younger. The older lodes are related in origin to the Boulder batholith or some of the neighboring intrusive granitic bodies and were probably formed during early Eocene time. The younger lodes were formed after dacite of probable Miocene age was erupted. They are possibly related in origin to some unexposed intrusive granitic rock. For convenience in description the region is divided into three parts districts north of Helena, districts in the Belt Mountains, and districts south of Helena. The districts north of Helena include a 50-mile stretch of the Continental Divide that forms a broad ridge surmounted with considerable areas of flat or gently sloping surface at a general altitude of 7,000 feet. Narrow valleys 1,000 to 2,000 feet deep are cut into this surface and lead out to the neighboring wide intermontane valleys. The area is underlain mostly by shale, sandstone, and limestone of the upper part of the Belt series. Beds of Paleozoic and Mesozoic age occur south of the Belt area and extend from Helena west and northwest. The igneous rocks of the area include diorite and gabbro sills and dikes of probable Cretaceous age, extrusive andesite that is probably Oligocene or Miocene, and stocks of quartz monzonite, granodiorite, and quartz diorite, probably of Oligocene or Miocene age. The ore deposits of the northern districts are chiefly lodes that are valuable for gold and silver but contain some lead and copper. In the Ophir district bodies of gold and silver ore occur mainly in limestone near a body of quartz monzonite. In the Scratchgravel Hills and Grass Valley districts veins of gold quartz and veins containing lead-silver ore occur in quartz monzonite and in the adjoining metamorphic rocks. In the Austin district lodes containing gold; silver, lead, and copper are found in limestone near intrusive quartz monzonite. An unusual mineral in one of these lodes is corkite, a hydrous sulphate of lead containing arsenic. A small stock of quartz diorite in the Marysville district has invaded and domed Belt rocks. Marginal and radial fractures formed during the cooling and contraction of the igneous body became the receptacles of gold and silver veins, one of which, the Drumlummon, has produced $16,000,000. The veins filled open fractures and are characterized by a gangue of platy calcite and quartz. Lodes in Towsley Gulch in the western part of the district contain lead in addition to gold. In the Gould district a small stock of the granodiorite has invaded the Belt rocks and caused the deposition of veins similar to those near Marysville. In the Heddleston district lodes valuable for gold, silver, lead, and copper occur in Belt sedimentary rocks and diorite, some of them associated with porphyry dikes. In the Wolf Creek district veins in Belt rocks have produced copper ore composed mainly of chalcopyrite or chalcopyrite and tennantite accompanied by pyrite and a gangue of quartz and barite. Placer deposits along the western slope of the Belt Mountains have produced $17,500,000 in gold. Sapphires were formerly obtained from some of these deposits. The central part of the Belt Mountains is a plateaulike area considered to be the remnant of a surface produced by erosion during Tertiary time. This surface was elevated and has been deeply trenched by narrow, transverse valleys that are bordered with remnants of low terraces in which most of the placer deposits occur. Most of the western slope of the mountains is underlain by sedimentary rocks of the Belt series. At the foot of the mountains these give place to Paleozoic rocks, and these in turn are overlain unconformably in Townsend Valley by Tertiary and later deposits. The main structural feature is a great arch called the York anticline, which occupies most of the west side of the mountains. At the west foot of the mountains this fold is bordered by a series of small synclines that are tightly squeezed, faulted, and overturned as a result of pressure exerted from the west or southwest along a fracture described as the El Dorado overthrust On another fracture called1 the Scout Camp overthrust the Belt rocks composing the western slope of the mountains are thrust eastward over Paleozoic beds. Both faults are regarded as branches of the Lewis overthrust of Glacier Park. Igneous rocks that probably range in age from early Eocene to Pleistocene are widely but sparingly distributed.' They include sills and dikes of quartz dibrite, porphyry dikes, small stocks of quartz monzonite and quartz diorite, and surface flows of andesite and basalt. The deposits in the Belt Mountains that are of most interest at the present time are lodes that are chiefly valuable for gold. Most of them are found in the vicinity of York and Confederate Gulch. Nearly all are small quartz veins formed along fractures in diorite dikes and stocks or on bedding planes in the adjoining Belt sedimentary rocks. An exception is the Golden Messenger, a replacement deposit of large size but low grade, formed along fractures in a quartz diorite dike. Other veins in the same dike belong to the rather uncommon class called ladder veins. Many of the small veins contain shoots and bunches of rich ore in their upper parts. Downward- enrichment in gold is indicated to have occurred in some of the veins near York that lie below an old erosion surface. Elsewhere the origin of the placer deposits from erosion o'f the lodes during interglacial stages of the Pleistocene is indicated. Lodes containing chalcopyrite occupy tension fractures in the Belt shales that were produced by lateral movements of the mass composing the mountain front. In the districts south of Helena mining began with the discovery, on July 14, 1864, of rich placer deposits at the present site of the city of Helena, on Last Chance Creek. Since then the placer and lode deposits of these districts have produced metals worth $130,000,000 or more, of which about one-third was gold, the remainder chiefly lead and zinc. Sedimentary rocks ranging in age from Algonkian to Cretaceous underlie parts of the region, and other parts are underlain by a bedded series of andesite and latite tuffs, breccias, and flows. These rocks have been intruded and severely metamorphosed by the quartz monzonite of the Boulder batholith, the exposures of which occupy a large area. Rocks later than the intrusion of the batholith are chiefly a series of late Tertiary dacites and rhyolites. The placers of the southern districts have been almost entirely worked out. The lodes have yielded metals worth $111,600,000, but many of them are still productive. They include veins and contact-metamorphic deposits. Some of the contact deposits contain copper ore, and others contain iron ore valuable for fluxing. The veins are of two ages. The older veins have yielded most of the metallic production of the region. Their ores in general are heavy sulphide aggregates composed mainly of galena, sphalerite, and pyrite. Arsenopyrite is generally present; tetrahedrite and chalcopyrite are less common. Many of the veins are distinguished from the usual type of ore body by the occurrence of abundant tourmaline. The, metals produced are chiefly silver, lead, gold, and zinc, with some copper. The younger veins are essentially precious-metal deposits. They are mainly fissure veins but include some disseminated deposits of low grade. They are widely distributed and include several productive bodies. A distinguishing feature is the occurrence in the gangue of cryptocrystalline quartz and lamellar calcite. A dominant eastward trend of the vein fractures of the older group indicates them to be tension cracks in the crust block lying west of the Lewis overthrust that were produced by stretching in a direction at right angles to the thrust.

Ore controls in the Charters Towers goldfield, NE Australia: Constraints from geological, geophysical and numerical analyses

USGS Publications Warehouse

Kreuzer, O.P.; Blenkinsop, T.G.; Morrison, R.J.; Peters, S.G.

2007-01-01

The approach taken in this paper, namely synthesising a wealth of previous information with new data and a genetic model, in combination with integrated numerical analyses, led to new insights into the geological controls on the localisation of auriferous veins and residual prospectivity of the Charters Towers goldfield, NE Australia. The method also has implications for the assessment of other "mature" goldfields worldwide. Despite a number of different ore controls having operated within the Charters Towers goldfield, the controlling factors can be linked to a single genetic model for orogenic, granitoid-hosted lode-gold mineralisation in a brittle deformation regime (D4) of NE-SW to NNE-SSW shortening, under conditions of supralithostatic fluid pressure and low stress difference. Spatial autocorrelation results suggest district-scale alignment of the auriferous veins parallel to and overlapping with the ESE-WNW- to E-W-striking Charters Towers-Ravenswood lineament, a major crustal boundary in the basement to the Ravenswood batholith. At the camp-scale, auriferous veins have abundance and proximity relationships with NW-SE-, NNW-SSE-, NE-SW- and ENE-WSW-oriented lineaments, suggesting that structures that controlled gold deposition in one camp did not necessarily control mineralisation in other camps. Fractal dimensions obtained with the box-counting method range from 1.02 to 1.10, whereas veins in the Charters Towers City camp are characterised by a significantly higher fractal dimension of 1.28. This discrepancy may be taken to imply that most or all outcropping and near-surface deposits within the Charters Towers City camp have been found and that new discoveries are more likely to occur at greater levels of depth, or outside the boundaries of this camp. The new understanding has implications for the assessment of the residual prospectivity of the Charters Towers goldfield, where large areas of prospective rock types and structures (e.g., approximately 40% of the Charters Towers-Ravenswood lineament) are hidden under cover. This parameter space was inaccessible to the historic prospectors and has received relatively little attention from recent explorers. The following steps are suggested for the development of a targeting strategy for lode-gold exploration in areas of the goldfield under cover: (1) identify from geological and geophysical data the ENE-WSW (?? 15??) and NNW-SSE (?? 15??) striking structures and geological boundaries within a 20-km-wide corridor parallel to and centred upon the Charters Towers-Ravenswood lineament, the potential control on gold deposit distribution at the regional- to district-scale, (2) interpret from geological and geophysical data the distribution of pre-Middle Devonian granitoids within these areas that are the preferred host rocks of the payable gold deposits, (3) deduce from geophysical data the ENE-WSW (?? 15??) and NNW-SSE (?? 15??) striking structures that cut or bound the intrusions identified in step 2, (4) locate segments along the structures identified in step 3 that deviate most from the geometry of a straight line (e.g., potential bends or splays) and/or intersect other structures or geological contacts, or both, and (5) define and rank potential targets within the prospective areas identified in step 4 and systematically test the best ones. ?? 2006 Elsevier B.V. All rights reserved.

Age, tectonic setting, and metallogenic implication of Phanerozoic granitic magmatism at the eastern margin of the Xing'an-Mongolian Orogenic Belt, NE China

NASA Astrophysics Data System (ADS)

Chen, Cong; Ren, Yunsheng; Zhao, Hualei; Yang, Qun; Shang, Qingqing

2017-08-01

The eastern margin of the Xing'an-Mongolian Orogenic Belt is characterised by widespread Phanerozoic granitic magmatism, some of which is closely related to significant ore mineralisation. This paper presents new geochronological, petrogenetic, and tectonic data for selected intrusions. Zircon U-Pb geochronology for five granitoid plutons indicates they were emplaced during the middle-late Permian (264-255 Ma) and Cretaceous (106-94 Ma), and thus granitic magmatism occurred throughout the Phanerozoic, Permian (268-252 Ma), Early-Middle Triassic (248-240 Ma), Early Jurassic (183 Ma), and Cretaceous (112-94 Ma). The Permian granitoids consist of monzogranite, granodiorite, tonalite, and quartz diorite, characterised by enrichment in Na2O (3.60-4.72 wt.%), depletion in K2O (0.97-2.66 wt.%), and a negative correlation between P2O5 and SiO2. Together with the presence of hornblende, these geochemical features are indicative of an I-type affinity. The Permian granitic magmatism is associated with quartz-vein-type tungsten deposits (252 Ma; unpublished Sm-Nd isochron age), which formed in an active continental margin setting related to subduction of the Palaeo-Asian Ocean. The Cretaceous quartz diorites have an adakitic affinity, having relatively high Sr (374-502 ppm), low Yb (0.51-0.67 ppm) and Y (8.7-10.7 ppm), and high Sr/Y (39.4-46.8) and (La/Yb)N values (16.2-34.7), suggesting that they were related to the partial melting of subducted oceanic crust. In addition, they are associated with porphyry Au-Cu deposits. We conclude that the Cretaceous granitic rocks and associated porphyry Au-Cu mineralisation occurred in an extensional tectonic setting related to the subduction of the Palaeo-Pacific Plate beneath the Eurasian Plate. In addition, the large-scale Early-Middle Triassic syn-collisional granite belt at the eastern margin of the Xing'an-Mongolian Orogenic Belt extends from the middle of Jilin Province to the Wangqing-Hunchun region, constraining the timing of the final collision between the North China Craton and the Jiamusi-Khanka Massif, and suggesting that the Xra Moron River-Changchun Suture likely extends eastward into the eastern Hunchun region. This collision caused the Middle Triassic mesothermal lode gold mineralisation.

Timing, Controls and Tectonic Context of Gold Mineralisation in the Southern Uplands-Longford-Down Terrane, Caledonides, Scotland and Ireland.

NASA Astrophysics Data System (ADS)

Rice, Samuel; Cuthbert, Simon; Hursthouse, Andrew

2017-04-01

The relationships between regional tectonic, magmatic and metamorphic events and hydrothermal mineralisation in orogenic settings are controversial [1]. The geotectonic development of the Caledonian orogenic belt of the northern British Isles, which hosts some significant gold deposits, is well-constrained and provides an excellent framework for investigating these relationships. Gold mineralisation at two of the best known deposits, Curraghinalt and Cononish, located in the Grampian Terrane, has recently been shown to have occurred between 462.7 and 452.8 Ma, during the Late Ordovician Grampian event of the Caledonian orogeny [2]. In the Southern Uplands-Longford-Down Terrane syn and post-kinnematic intrusions constrain the age of mineralisation to between 418 and 397 Ma. Mineralisation is hosted by late Caledonian transverse D3 structures of Early Devonian age [3]. Fluid inclusion data indicate that the auriferous quartz veins were deposited from a low salinity carbonic mesothermal ( 330°C) fluid of apparently mixed magmatic-metamorphic origin, consistent with a Caledonian orogenic origin [4-6]. Gold mineralisation is associated with contemporaneous minor intrusions at several localities [7-9] exhibiting comparable mineralogy, geochemistry, fluid inclusion types and structural relationships, indicating that coeval regional magmatism may have been a significant factor for all of the deposits. Gold mineralisation in the SULDT occurred during a transition from compression to strike-slip deformation coeval with a regional pulse of orogenic magmatism [10]. The common association between gold deposits in Phanerozoic orogenic settings and intrusions may explain overlapping characteristics between orogenic, intrusion-related and porphyry gold deposits and may reflect the important role of magmatism in conveying the heat to drive hydrothermal systems at shallow crustal levels. Further work will focus on constraining the sources of mineralising fluids and metals. 1. Phillips, G.N. and Powell, R., 2009. Earth-Sci. Rev. 94(1-4), 1-21. 2. Rice, C.M., et al., 2016. Econ. Geol., 111(1), 127-150. 3. Anderson, T.B., 1987 J. Geol. Soc., 144(5), 817-825. 4. Steed, G.M. and Morris, G.M., 1986. in: Turbidite-Hosted Gold Deposits, Geol. Ass. Can. Spec. Pap., 67 - 86. 5. Lowry, D., et al., 1997. Trans. Inst. Min. Met. B 106, B157-B168. 6. Samson, I.M. and Banks D.A., 1988. Min. Dep., 1988. 23, 1-8. 7. Brown, M.J., et al., 1979. MRP Rept. 30. 8. Charley, M.J., Hazleton, R.E. and Tear, S.J., 1989. Trans. Inst. of Min. Met. B98, 48-49. 9. Leake, R.C., et al., 1981, MRP Rept. 46. 10. Dewey, J.F. and Strachan, R.A., 2003. J. Geol. Soc., 160(2), 219-229.

Arsenic and mercury contamination related to historical goldmining in the Sierra Nevada, California

USGS Publications Warehouse

Alpers, Charles N.

2017-01-01

Arsenic (As) is a naturally occurring constituent in low-sulphide gold-quartz vein deposits, the dominant deposit type for lode mines in the Sierra Nevada Foothills (SNFH) gold (Au) province of California. Concentrations of naturally occurring mercury (Hg) in the SNFH Au province are low, but extensive use and loss of elemental Hg during amalgamation processing of ore from lode and placer Au deposits led to widespread contamination of Hg in the Sierra Nevada foothills and downstream areas, such as the Sacramento–San Joaquin Delta and San Francisco Bay. This review paper provides an overview of As and Hg contamination related to historical Au mining in the Sierra Nevada of California. It summarizes the geology, mineralogy, and geochemistry of the Au deposits, and provides information on specific areas where detailed studies have been done in association with past, ongoing, and planned remediation activities related to the environmental As and Hg contamination.Arsenic is a naturally occurring constituent in low-sulphide Au-quartz vein deposits, the dominant deposit type for lode mines in the Sierra Nevada Foothills (SNFH) Au province (Ashley 2002). Because of elevated concentrations of As in accessory iron-sulphide minerals including arsenopyrite (FeAsS) and arsenian pyrite (Fe(S,As)2), As is commonly a contaminant of concern in lode Au mine waste, including waste rock and mill tailings. The principal pathways of human As exposure from mine waste include ingestion of soil or drinking water, and inhalation of dust in contaminated areas (Mitchell 2014).Concentrations of naturally occurring Hg in the SNFH Au province are low, but extensive use and loss of elemental Hg during amalgamation processing of ore from lode and placer Au deposits (Churchill 2000) led to widespread contamination of Hg in the Sierra Nevada foothills and downstream areas, such as the Sacramento–San Joaquin Delta and San Francisco Bay (Alpers et al. 2005a). Conversion of Hg to monomethylmercury (MeHg) by sulphate-reducing and iron-reducing microbes facilitates its bioaccumulation (Wiener et al. 2003). The human Hg exposure pathway of main concern is ingestion of MeHg from sport (non-commercial) fish, especially higher trophic levels such as bass species (Davis et al. 2008). Wildlife exposure to MeHg is also a concern because of chronic and reproductive effects, for example in fish-eating and invertebrate-foraging birds (e.g. Wiener et al. 2003; Eagles-Smith et al. 2009; Ackerman et al. 2016).

Discriminating fluid source regions in orogenic gold deposits using B-isotopes

NASA Astrophysics Data System (ADS)

Lambert-Smith, James S.; Rocholl, Alexander; Treloar, Peter J.; Lawrence, David M.

2016-12-01

The genesis of orogenic gold deposits is commonly linked to hydrothermal ore fluids derived from metamorphic devolatilization reactions. However, there is considerable debate as to the ultimate source of these fluids and the metals they transport. Tourmaline is a common gangue mineral in orogenic gold deposits. It is stable over a very wide P-T range, demonstrates limited volume diffusion of major and trace elements and is the main host of B in most rock types. We have used texturally resolved B-isotope analysis by secondary ion mass spectrometry (SIMS) to identify multiple fluid sources within a single orogenic gold ore district. The Loulo Mining District in Mali, West Africa hosts several large orogenic gold ore bodies with complex fluid chemistry, associated with widespread pre-ore Na- and multi-stage B-metasomatism. The Gara deposit, as well as several smaller satellites, formed through partial mixing between a dilute aqueous-carbonic fluid and a hypersaline brine. Hydrothermal tourmaline occurs as a pre-ore phase in the matrix of tourmalinite units, which host mineralization in several ore bodies. Clasts of these tourmalinites occur in mineralized breccias. Disseminated hydrothermal and vein hosted tourmaline occur in textural sites which suggest growth during and after ore formation. Tourmalines show a large range in δ11B values from -3.5 to 19.8‰, which record a change in fluid source between paragenetic stages of tourmaline growth. Pre-mineralization tourmaline crystals show heavy δ11B values (8-19.8‰) and high X-site occupancy (Na ± Ca; 0.69-1 apfu) suggesting a marine evaporite source for hydrothermal fluids. Syn-mineralization and replacement phases show lighter δ11B values (-3.5 to 15.1‰) and lower X-site occupancy (0.62-0.88 apfu), suggesting a subsequent influx of more dilute fluids derived from devolatilization of marine carbonates and clastic metasediments. The large, overlapping range in isotopic compositions and a skew toward the opposing population in the δ11B data for both tourmaline groups reflects continual tourmaline growth throughout mineralization, which records the process of fluid mixing. A peak in δ11B values at ∼8‰ largely controlled by tourmalines of syn- to post-ore timing represents a mixture of the two isotopically distinct fluids. This paper demonstrates that B-isotopes in tourmaline can be instrumental in interpreting complex and dynamic hydrothermal systems. The importance of B as an integral constituent of orogenic ore forming fluids and as a gangue phase in orogenic gold deposits makes B-isotope analysis a powerful tool for testing the level of source region variability in these fluids, and by extension, that of metal sources.

Extreme variation of sulfur isotopic compositions in pyrite from the Qiuling sediment-hosted gold deposit, West Qinling orogen, central China: An in situ SIMS study with implications for the source of sulfur

USGS Publications Warehouse

Chen, Lei; Li, Xian-hua; Li, Jian-wei; Hofstra, Albert H.; Liu, Yu; Koenig, Alan E.

2015-01-01

High spatial resolution textural (scanning electron microscope (SEM)), chemical (electron microprobe (EMP)) and laser ablation-inductively coupled plasma-mass spec- trometry (LA-ICP-MS)), and sulfur isotopic (secondary ion mass spectrometry (SIMS)) analyses of pyrite from the Qiuling sediment-hosted gold deposit (232±4 Ma) in the West Qinling orogen, central China were conducted to distinguish pyrite types and gain insights into the source and evolution of sulfur in hydrothermal fluids. The results reveal an enormous variation (−27.1 to +69.6‰) in sulfur isotopic composition of pyrite deposited during three paragenetic stages. Pre-ore framboidal pyrite, which is characterized by low concentra- tions of As, Au, Cu, Co, and Ni, has negative δ34S values of −27.1 to −7.6‰ that are interpreted in terms of bacterial re- duction of marine sulfate during sedimentation and diagenesis of the Paleozoic carbonate and clastic sequences, the predom- inant lithologies in the deposit area, and the most important hosts of many sediment-hosted gold deposits throughout the West Qinling orogen. The ore-stage hydrothermal pyrite con- tains high concentrations of Au, As, Cu, Sb, Tl, and Bi and hasa relatively narrow range of positive δ34S values ranging from +8.1 to +15.2‰. The sulfur isotope data are comparable to those of ore pyrite from many Triassic orogenic gold deposits and Paleozoic sedimentary exhalative (SEDEX) Pb-Zn de- posits in the West Qinling orogen, both being hosted mainly in the Devonian sequence. This similarity indicates that sulfur, responsible for the auriferous pyrite at Qiuling, was largely derived from the metamorphic devolatization of Paleozoic marine sedimentary rocks. Post-ore-stage pyrite, which is sig- nificantly enriched in Co and Ni but depleted in Au and As, has unusually high δ34S values ranging from +37.4 to +69.6 ‰, that are interpreted to result from thermochemical reduc- tion of evaporite sulfates in underlying Cambrian sedimentary rocks with very high δ34S values. The variations in Au content and sulfur isotopic compositions across a single ore-stage py- rite grain may reflect displacement of indigenous groundwater with low δ34S values by auriferous metamorphic fluids with high δ34S values. The very low-grade metamorphism of the host rocks and the metamorphic derivation of sulfur for the ore pyrite indicate that the Qiuling sediment-hosted gold deposit is an epizonal manifestation of an orogenic gold system in the West Qinling orogen.

Critical elements in Carlin, epithermal, and orogenic gold deposits

USGS Publications Warehouse

Goldfarb, Richard J.; Hofstra, Albert H.; Simmons, Stuart F.

2016-01-01

Carlin, epithermal, and orogenic gold deposits, today mined almost exclusively for their gold content, have similar suites of anomalous trace elements that reflect similar low-salinity ore fluids and thermal conditions of metal transport and deposition. Many of these trace elements are commonly referred to as critical or near-critical elements or metals and have been locally recovered, although typically in small amounts, by historic mining activities. These elements include As, Bi, Hg, In, Sb, Se, Te, Tl, and W. Most of these elements are now solely recovered as by-products from the milling of large-tonnage, base metal-rich ore deposits, such as porphyry and volcanogenic massive sulfide deposits.A combination of dominance of the world market by a single country for a single commodity and a growing demand for many of the critical to near-critical elements could lead to future recovery of such elements from select epithermal, orogenic, or Carlin-type gold deposits. Antimony continues to be recovered from some orogenic gold deposits and tellurium could potentially be a primary commodity from some such deposits. Tellurium and indium in sphalerite-rich ores have been recovered in the past and could be future commodities recovered from epithermal ores. Carlin-type gold deposits in Nevada are enriched in and may be a future source for As, Hg, Sb, and/or Tl. Some of the Devonian carbonaceous host rocks in the Carlin districts are sufficiently enriched in many trace elements, including Hg, Se, and V, such that they also could become resources. Thallium may be locally enriched to economic levels in Carlin-type deposits and it has been produced from Carlin-like deposits elsewhere in the world (e.g., Alsar, southern Macedonia; Lanmuchang, Guizhou province, China). Mercury continues to be recovered from shallow-level epithermal deposits, as well as a by-product of many Carlin-type deposits where refractory ore is roasted to oxidize carbon and pyrite, and mercury is then captured in air pollution control devices.

Greenstone-hosted lode-gold mineralization at Dungash mine, Eastern Desert, Egypt

NASA Astrophysics Data System (ADS)

Zoheir, Basem; Weihed, Pär

2014-11-01

The auriferous quartz ± carbonate veins at Dungash mine, central Eastern Desert of Egypt, are confined to ∼E-trending dilation zones within variably foliated/sheared metavolcanic/volcaniclastic rocks. The vein morphology and internal structures demonstrate formation concurrent with a dextral shear system. The latter is attributed to flexural displacement of folded, heterogeneous rock blocks through transpression increment, late in the Neoproterozoic deformation history of the area. Geochemistry of the host metavolcanic/metavolcaniclastic rocks from the mine area suggests derivation from a low-K, calc-alkaline magma in a subduction-related, volcanic arc setting. In addition, chemistry of disseminated Cr-spinels further constrain on the back-arc basin setting and low-grade metamorphism, typical of gold-hosting greenstone belts elsewhere. Mineralogy of the mineralized veins includes an early assemblage of arsenopyrite-As-pyrite-gersdorffite ± pyrrhotite, a transitional pyrite-Sb-arsenopyrite ± gersdorffite assemblage, and a late tetrahedrite-chalcopyrite-sphalerite-galena-gold assemblage. Based on arsenopyrite and chlorite geothermometers, formation of gold-sulfide mineralization occurred between ∼365 and 280 °C. LA-ICP-MS measurements indicate the presence of refractory Au in arsenian pyrite (up to 53 ppm) and Sb-bearing arsenopyrite (up to 974 ppm). Abundant free-milling gold associated with the late sulfide assemblage may have been mobilized and re-distributed by circulating, lower temperature ore fluids in the waning stages of the hydrothermal system. Based on the isotopic values of vein quartz and carbonate, the calculated average δ18OH2O values of the ore fluids are 5.0 ± 1.4‰ SMOW for quartz, and 3.3 ± 1.4‰ for vein carbonate. The measured carbonate δ13C values correspond to ore fluids with δ13CCO2 = -6.7 ± 0.7‰ PDB. These results suggest a mainly metamorphic source for ore fluids, in good agreement with the vein morphology, textures and hydrothermal alteration. The calculated δ34SH2S values for early, transitional, and late sulfide assemblages define three distinct ranges (∼1.5-3.6‰), (∼0.4-1.0‰), and (-3.7‰ to -1.9‰), respectively. The systematic evolution towards lighter δ34S values may be attributed to recrystallization, or to ore fluid buffering under variable physicochemical conditions. The shear zone-related setting, mineralogy and isotopic characteristics of gold mineralization in Dungash mine are comparable with other orogenic gold deposits in the region (e.g., Barramiya deposit), which may suggest a regional setting controlling gold metallogeny of the region. This setting should guide future exploration programs in the central Eastern Desert province.

Orogenesis, high-T thermal events, and gold vein formation within metamorphic rocks of the Alaskan Cordillera

USGS Publications Warehouse

Goldfarb, R.J.; Snee, L.W.; Pickthorn, W.J.

1993-01-01

Mesothermal, gold-bearing quartz veins are widespread within allochthonous terranes of Alaska that are composed dominantly of greenschist-facies metasedimentary rocks. The most productive lode deposits are concentrated in south-central and southeastern Alaska; small and generally nonproductive gold-bearing veins occur upstream from major placer deposits in interior and northern Alaska. Ore-forming fluids in all areas are consistent with derivation from metamorphic devolatilisation reactions, and a close temporal relationship exists between high-T tectonic deformation, igneous activity, and gold mineralization. Ore fluids were of consistently low salinity, CO2-rich, and had ??18O values of 7 ???-12??? and ??D values between -15??? and -35???. Upper-crustal temperatures within the metamorphosed terranes reached at least 450-500??C before onset of significant gold-forming hydrothermal activity. In southern Alaska, gold deposits formed during latter stages of Tertiary, subduction-related, collisional orogenesis and were often temporally coeval with calc-alkaline magmatism. -from Authors

Geology and ore deposits of the Breckenridge district, Colorado

USGS Publications Warehouse

Ransome, Frederick Leslie

1911-01-01

The Breckenridge district is situated in Summit County, Colo., 60 miles. west-southwest of Denver, near the crest of the Continental Divide, and is drained by Blue River, a tributary of the Grand. Placer mining began here in 1860, but it was not until about 1879 that attention was turned to lode mining. During the last five years gold dredging, after many failures, has become established as an important industry.

SALMON-TRINITY ALPS WILDERNESS, CALIFORNIA.

USGS Publications Warehouse

Hotz, Preston E.; Thurber, Horace K.

1984-01-01

The Salmon-Trinity Alps Wilderness in the Klamath Mountains province occupies an area of about 648 sq mi in parts of Trinity, Siskiyou, and Humboldt Counties, northwestern California. As a result of field studies it was determined that the Salmon-Trinity Alps Wilderness has an area with substantiated potential for gold resources in known lode deposits. Small amounts of quicksilver have been produced from one mine but there is little promise for the discovery of additional mercury resources. Geochemical sampling showed that anomalously high amounts of several other metals occur in a few places, but there is little promise for the discovery of energy or mineral resources other than mercury and gold.

Mercury contamination from historical gold mining in California

USGS Publications Warehouse

Alpers, Charles N.; Hunerlach, Michael P.; May, Jason T.; Hothem, Roger L.

2005-01-01

Mercury contamination from historical gold mines represents a potential risk to human health and the environment. This fact sheet provides background information on the use of mercury in historical gold mining and processing operations in California, with emphasis on historical hydraulic mining areas. It also describes results of recent USGS projects that address the potential risks associated with mercury contamination. Miners used mercury (quicksilver) to recover gold throughout the western United States. Gold deposits were either hardrock (lode, gold-quartz veins) or placer (alluvial, unconsolidated gravels). Underground methods (adits and shafts) were used to mine hardrock gold deposits. Hydraulic, drift, or dredging methods were used to mine the placer gold deposits. Mercury was used to enhance gold recovery in all the various types of mining operations; historical records indicate that more mercury was used and lost at hydraulic mines than at other types of mines. On the basis of USGS studies and other recent work, a better understanding is emerging of mercury distribution, ongoing transport, transformation processes, and the extent of biological uptake in areas affected by historical gold mining. This information has been used extensively by federal, state, and local agencies responsible for resource management and public health in California.

The Landforms of Granitic Rocks: An Annotated Bibliography

DTIC Science & Technology

1990-05-01

major sources of copper , tin, silver, gold, and many other valuable commodities. They are naturally highly radioactive, particularly at depth, and are...et al., 1978). Kesel (1977) cited sheeting and spalling as the major process in central Arizona . Crystal growth, usually salt or ice, is a common...quarries; and 4) aplite veins and dikes. Tin is found on Dartmoor, but copper is common only around the edges. Tin and copper lodes run east-west and

Magnetotelluric survey to locate the Archean/Proterozoic suture zone north of Wells, Nevada

USGS Publications Warehouse

Williams, Jackie M.; Rodriguez, Brian D.

2006-01-01

It is important to know whether major mining districts in the Northern Nevada Gold Province are underlain by rocks of the Archean Wyoming craton, which are known to contain orogenic gold deposits, or by accreted rocks of the Paleoproterozoic Mojave province. It is also important to know the location and orientation of the Archean/Proterozoic suture zone between these provinces as well as major basement structures within these terranes because they may influence subsequent patterns of sedimentation, deformation, magmatism, and hydrothermal activity. The Archean was the main gold-mineralization period, and Archean lode-gold deposits were formed at mid-crustal depths along major shear zones. The nature of the crystalline basement below the Northern Nevada Gold Province and the location of major faults within it are relevant to Rodinian reconstructions, crustal development, and ore deposit models (e.g., Hofstra and Cline, 2000; Grauch and others, 2003). According to Whitmeyer and Karlstrom (2004), the Archean cratons of the northwestern United States and Canada had stabilized as continental lithosphere by 2.5 Ga, and were rifted and assembled into a large continental mass by 1.8 Ga, to which the 1.73-1.68 Ga Mohave province was accreted by 1.65 Ga. The Archean/Proterozoic suture zone has a west-southwest strike where it is exposed (Reed, 1993) at the eastern Utah and southwestern Wyoming border (Cheyenne Belt) where it is characterized by an up to 7-km-thick mylonite zone (Smithson and Boyd, 1998). In the Great Basin, the strike of the Archean/Proterozoic suture zone is poorly constrained because it is largely concealed below a Neoproterozoic-Paleozoic miogeocline and basin fill. East-west and southwest-northeast strikes for the Archean/Proterozoic suture zone have been inferred based on Sr, Nd, and Pb isotopic compositions of granitoid intrusions (Tosdal and others, 2000). To better constrain the location and strike of the Archean/Proterozoic suture zone below cover, three regional north-south magnetotelluric (MT) sounding profiles were acquired in western Utah and northeastern Nevada (Williams and Rodriguez, 2003; 2004; 2005), and one east-west MT sounding profile (fig. 1) MT sounding profile was acquired in northeastern Nevada. Resistivity modeling of the MT data can be used to investigate buried structures or sutures that may have influenced subsequent regional fluid flow and localized mineralization. The purpose of this report is to release the MT sounding data collected along the east-west profile in northeastern Nevada; no interpretation of the data is included.

Preliminary summary review of thorium-bearing mineral occurrences in Alaska

USGS Publications Warehouse

Bates, Robert G.; Wedow, Helmuth

1952-01-01

Thorium-bearing minerals are known at 47 localities in Alaska. At these localities the thorium occurs as a major constituent or in minor amounts as an impurity in one or more of the following 12 minerals: allanite, columbite, ellsworthite, eschynite, gummite, monazite, orangite, parisite, thorianite, thorite, xenotime, and zircon. In addition other minerals, such as biotite and sphene, are radioactive and may contain thorium. Several unidentified columbate minerals with uranium or thorium and uranium as major constituents have been recognized at some localities. The distribution, by type of deposit, of the 57 thorium occurrences is as follows: lode - 3, lode and placer - 1, granitic rock - 3, granitic rock and related placer - 14, and placer - 26. Of the four lode occurrences only the radioactive veins at Salmon Bay in southeastern Alaska and the contact metamorphic deposit in the Nixon Fork area of central Alaska warrant further consideration, although insufficient data are available to determine whether these two deposits have commercial possibilities. The remaining occurrences of thorium-bearing minerals in Alaska are limited to placer deposits and disseminations of accessory minerals in granitic rocks. In most of these occurrences the thorium-bearing minerals occur in only trace amounts and consequently warrent little further consideration. More data are needed to determine the possibilities of byproduct recovery of thorium-bearing minerals from several of the gold and tin placers.

Fieldtrip stop #2-6 Twin Lakes glacial geology and mining history

USGS Publications Warehouse

Ruleman, C.A.; Shorba, R.R.; Edited by Simmons, Beth

2013-01-01

The area of Twin Lakes has been of interest to geologists going back to the days of the Hayden Survey (1874) and continues to be studied for its spectacular glacial geology. Twin Lakes (2747 m; 9015 ft) was settled in 1879 (Scott, 2003) as the Leadville silver rush began, when prospectors found the first traces and outcrops of the Gordon, Tiger, Little Joe, and other rich lodes west of Twin Lakes. Between 1860 and 1950, the Twin Lakes area produced at least 2.5 million dollars in placer gold, much of which was produced when the official U.S. Government price of gold was $20.67 per troy once.

Late-kinematic timing of orogenic gold deposits and significance for computer-based exploration techniques with emphasis on the Yilgarn Block, Western Australia

USGS Publications Warehouse

Groves, D.I.; Goldfarb, R.J.; Knox-Robinson, C. M.; Ojala, J.; Gardoll, S.; Yun, G.Y.; Holyland, P.

2000-01-01

Orogenic gold deposits are a widespread coherent group of epigenetic ore deposits that are sited in accretionary or collisional orogens. They formed over a large crustal-depth range from deep-seated low-salinity H2O-CO2 + CH4 + N2 ore fluids and with Au transported as thio-complexes. Regional structures provide the main control on deposit distribution. In many terranes, first-order faults or shear zones appear to have controlled regional fluid flow, with greatest ore-fluid fluxes in, and adjacent to, lower-order faults, shear zones and/or large folds. Highly competent and/or chemically reactive rocks are the most common hosts to the larger deposits. Focusing of supralithostatic ore fluids into dilatant zones appears to occur late during the evolutionary history of the host terranes, normally within D3 or D4 in a D1-D4 deformation sequence. Reactivation of suitably oriented pre-existing structures during a change in far-field stress orientation is a factor common to many deposits, and repeated reactivation may account for multiple mineralization episodes in some larger deposits. Absolute robust ages of mineralization support their late-kinematic timing, and, in general, suggest that deposits formed diachronously towards the end of the 100 to 200 m.y. long evolutionary history of hosting orogens. For example, in the Yilgarn Block, a region specifically emphasised in this study, orogenic gold deposits formed in the time interval between 40 and 90 m.y., with most about 60 to 70 m.y., after the youngest widespread basic-ultrabasic volcanism and towards the end of felsic magmatism. The late timing of orogenic gold deposits is pivotal to geologically-based exploration methodologies. This is because the present structural geometries of: (i) the deposits, (ii) the hosting goldfields, and (iii) the enclosing terranes are all essentially similar to those during gold mineralization, at least in their relative position to each other. Thus, interpretation of geological maps and cross-sections and three-dimensional models can be used to accurately simulate the physical conditions that existed at the time of ore deposition. It is particularly significant that the deposits are commonly related to repetitive and predictable geometries, such as structural heterogeneities within or adjacent to first-order structures, around rigid granitoid bodies, or in specific "locked-up" fold-thrust structures. Importantly, the two giant greenstone-hosted goldfields, Kalgoorlie and Timmins, show a remarkably similar geometry at the regional scale. Computer-based stress mapping and GIS-based prospectivity mapping are two computer-based quantitative methodologies that can utilize and take advantage of the late timing aspect of this deposit type to provide important geological aids in exploration, both in broad regions and more localized goldfields. Both require an accurate and consistent solid geology map, stress mapping requires knowledge of the far-field stresses during mineralization, and the empirical prospectivity mapping requires data from a significant number of known deposits in the terrane. The Kalgoorlie Terrane, in the Yilgarn Block, meets these criteria, and illustrates the potential of these methodologies in the exploration for orogenic gold deposits. Low minimum stress anomalies, interpreted to represent dilational zones during gold-related deformation, coincide well with the positions of known goldfields rather than individual gold deposits in the terrane, and there are additional as-yet unexplained anomalies. The prospectivity analysis confirms that predictable and repetitive factors controlling the siting of deposits are: (i) proximity to, and orientation and curvature of, granitoid-greenstone contacts, (ii) proximity to segments of crustal faults which strike in a preferred direction, (iii) proximity to specific lithological contacts which have similar preferred strike, (iv) proximity to anticlinal structures, and (v) the presence of preferred

Absolute timing of sulfide and gold mineralization: A comparison of Re-Os molybdenite and Ar-Ar mica methods from the Tintina Gold Belt, Alaska

USGS Publications Warehouse

Selby, D.; Creaser, R.A.; Hart, C.J.R.; Rombach, C.S.; Thompson, J.F.H.; Smith, Moira T.; Bakke, A.A.; Goldfarb, R.J.

2002-01-01

New Re-Os molybdenite dates from two lode gold deposits of the Tintina Gold Belt, Alaska, provide direct timing constraints for sulfide and gold mineralization. At Fort Knox, the Re-Os molybdenite date is identical to the U-Pb zircon age for the host intrusion, supporting an intrusive-related origin for the deposit. However, 40Ar/39Ar dates from hydrothermal and igneous mica are considerably younger. At the Pogo deposit, Re-Os molybdenite dates are also much older than 40Ar/39Ar dates from hydrothermal mica, but dissimilar to the age of local granites. These age relationships indicate that the Re-Os molybdenite method records the timing of sulfide and gold mineralization, whereas much younger 40Ar/39Ar dates are affected by post-ore thermal events, slow cooling, and/or systemic analytical effects. The results of this study complement a growing body of evidence to indicate that the Re-Os chronometer in molybdenite can be an accurate and robust tool for establishing timing relations in ore systems.

Legacy of the California Gold Rush: Environmental geochemistry of arsenic in the southern Mother Lode Gold District

USGS Publications Warehouse

Savage, K.S.; Bird, D.K.; Ashley, R.P.

2000-01-01

Gold mining activity in the Sierra Nevada foothills, both recently and during the California Gold Rush, has exposed arsenic-rich pyritic rocks to weathering and erosion. This study describes arsenic concentration and speciation in three hydrogeologic settings in the southern Mother Lode Gold District: mineralized outcrops and mine waste rock (overburden); mill tailings submerged in a water reservoir; and lake waters in this monomictic reservoir and in a monomictic lake developing within a recent open-pit mine. These environments are characterized by distinct modes of rock-water interaction that influence the local transport and fate of arsenic. Arsenic in outcrops and waste rock occurs in arsenian pyrite containing an average of 2 wt% arsenic. Arsenic is concentrated up to 1300 ppm in fine-grained, friable iron-rich weathering products of the arsenian pyrite (goethite, jarosite, copiapite), which develop as efflorescences and crusts on weathering outcrops. Arsenic is sorbed as a bidentate complex on goethite, and substitutes for sulfate in jarosite. Submerged mill tailings obtained by gravity core at Don Pedro Reservoir contain arsenic up to 300 ppm in coarse sand layers. Overlying surface muds have less arsenic in the solid fraction but higher concentrations in porewaters (up to 500 ??g/L) than the sands. Fine quartz tailings also contain up to 3.5 ppm mercury related to the ore processing. The pH values in sediment porewaters range from 3.7 in buried gypsum-bearing sands and tailings to 7 in the overlying lake sediments. Reservoir waters immediately above the cores contain up to 3.5 ??g/L arsenic; lake waters away from the submerged tailings typically contain less than 1 ??g/L arsenic. Dewatering during excavation of the Harvard open-pit mine produced a hydrologic cone of depression that has been recovering toward the pre-mining groundwater configuration since mining ended in 1994. Aqueous arsenic concentrations in the 80 m deep pit lake are up to 1000 ??g/L. Redistribution of the arsenic occurs during summer stratification, with highest concentrations at middle depths. The total mass of arsenic in the pit lake increases coinciding with early winter rains that erode, partially dissolve, and transport arsenic-bearing salts into the pit lake. Arsenic concentration, speciation, and distribution in the Sierra Nevada foothills depend on many factors, including the lithologic sources of arsenic, climatic influences on weathering of host minerals, and geochemical characteristics of waters with which source and secondary minerals react. Oxidation of arsenian pyrite to goethite, jarosite, and copiapite causes temporary attenuation of arsenic during summer, when these secondary minerals accumulate; subsequent rapid dissemination of arsenic into the aqueous environment is caused by annual winter storms. As the population of the Mother Lode area grows, it is increasingly important to consider these effects during planning and development of land and groundwater resources.

The geology of the Morro Velho gold deposit in the Archean Rio das Velhas greenstone belt, Quadrilátero Ferrífero, Brazil

USGS Publications Warehouse

Vial, Diogenes Scipioni; DeWitt, Ed; Lobato, Lydia Maria; Thorman, Charles H.

2007-01-01

The Morro Velho gold deposit, Quadrilátero Ferrífero region, Minas Gerais, Brazil, is hosted by rocks at the base of the Archean Rio das Velhas greenstone belt. The deposit occurs within a thick carbonaceous phyllite package, containing intercalations of felsic and intermediate volcaniclastic rocks and dolomites. Considering the temporal and spatial association of the deposit with the Rio das Velhas orogeny, and location in close proximity to a major NNW-trending fault zone, it can be classified as an orogenic gold deposit. Hydrothermal activity was characterized by intense enrichment in alteration zones of carbonates, sulfides, chlorite, white mica±biotite, albite and quartz, as described in other Archean lode-type gold ores. Two types of ore occur in the deposit: dark gray quartz veins and sulfide-rich gold orebodies. The sulfide-rich orebodies range from disseminated concentrations of sulfide minerals to massive sulfide bodies. The sulfide assemblage comprises (by volume), on average, 74% pyrrhotite, 17% arsenopyrite, 8% pyrite and 1% chalcopyrite. The orebodies have a long axis parallel to the local stretching lineation, with continuity down the plunge of fold axis for at least 4.8 km. The group of rocks hosting the Morro Velho gold mineralization is locally referred to as lapa seca. These were isoclinally folded and metamorphosed prior to gold mineralization. The lapa seca and the orebodies it hosts are distributed in five main tight folds related to F1 (the best examples are the X, Main and South orebodies, in level 25), which are disrupted by NE- to E-striking shear zones. Textural features indicate that the sulfide mineralization postdated regional peak metamorphism, and that the massive sulfide ore has subsequently been neither metamorphosed nor deformed. Lead isotope ratios indicate a model age of 2.82 ± 0.05 Ga for both sulfide and gold mineralization. The lapa seca are interpreted as the results of a pre-gold alteration process and may be divided into carbonatic, micaceous and quartzose types. The carbonatic lapa seca is subdivided into gray and brown subtypes. Non-mineralized, gray carbonatic lapa seca forms the hanging wall to the orebodies, and is interpreted as the product of extreme CO2 metasomatism during hydrothermal alteration. This dolomitic lapa seca ranges in composition from relatively pure limestone and dolomite to silty limestone and dolomite. The brown carbonatic and micaceous lapa secas are the host rocks to gold. These units are interpreted to correspond to the sheared and hydrothermal products of metamorphosed volcaniclastic and/or volcanic rocks of varying composition from dacitic to andesitic, forming various types of schists and phyllites. The high-grade, massive sulfide orebodies occur at the base of the gray carbonatic lapa seca. Both disseminated mineralization and quartz veins are hosted by micaceous lapa seca. The data are consistent with a model of epigenetic mineralization for the lapa seca, from a hydrothermal fluid derived in part from the Archean basement or older crust material.

Gold and trace element zonation in pyrite using a laser imaging technique: Implications for the timing of gold in orogenic and carlin-style sediment-hosted deposits

USGS Publications Warehouse

Large, R.R.; Danyushevsky, L.; Hollit, C.; Maslennikov, V.; Meffre, S.; Gilbert, S.; Bull, S.; Scott, R.; Emsbo, P.; Thomas, H.; Singh, B.; Foster, J.

2009-01-01

Laser ablation ICP-MS imaging of gold and other trace elements in pyrite from four different sediment- hosted gold-arsenic deposits has revealed two distinct episodes of gold enrichment in each deposit: an early synsedimentary stage where invisible gold is concentrated in arsenian diagenetic pyrite along with other trace elements, in particular, As, Ni, Pb, Zn, Ag, Mo, Te, V, and Se; and a later hydrothermal stage where gold forms as either free gold grains in cracks in overgrowth metamorphic and/or hydrothermal pyrite or as narrow gold- arsenic rims on the outermost parts of the overgrowth hydrothermal pyrite. Compared to the diagenetic pyrites, the hydrothermal pyrites are commonly depleted in Ni, V, Zn, Pb, and Ag with cyclic zones of Co, Ni, and As concentration. The outermost hydrothermal pyrite rims are either As-Au rich, as in moderate- to high- grade deposits such as Carlin and Bendigo, or Co-Ni rich and As-Au poor as in moderate- to low-grade deposits such as Sukhoi Log and Spanish Mountain. The early enrichment of gold in arsenic-bearing syngenetic to diagenetic pyrite, within black shale facies of sedimentary basins, is proposed as a critical requirement for the later development of Carlin-style and orogenic gold deposits in sedimentary environments. The best grade sediment-hosted deposits appear to have the gold climax event, toward the final stages of deformation-related hydrothermal pyrite growth and fluid flow. ?? 2009 Society of Economic Geologists, Inc.

Possible genetic link between I-type granite and orogenic gold deposits in Egypt (metamorphic-magmatic interaction?)

NASA Astrophysics Data System (ADS)

Abd El Monsef, Mohamed

2015-04-01

The orogenic gold deposits are a distinctive type of deposits that revealed unique temporal and spatial association with an orogeny. Where, the system of gold veins and related ore minerals was confined to hydrothermal solutions formed during compressional to transpressional deformation processes at convergent plate margins in accretionary and collisional orogens, with the respect to ongoing deep-crustal, subduction-related thermal processes. In Egypt, most of vein-type and dyke-type gold mineralization are restricted to granitic rocks or at least near of granitic intrusion that seems to have had an important influence on gold mineralization. Shear zone-related, mesothermal gold deposits of Fatira and Gidami mines in the northern Eastern Desert of Egypt are found within granitic bodies or at the contact between granites and metavolcanic rocks. The hosting-granitic rocks in Fatira and Gidami areas are mainly of granodioritic composition (I-Type granite) which is related to calc-alkaline magmatic series. However, Fatira granitoids were developed within island arc tectonic settings related to mature island arc system (Late-orogenic stage), at relatively low temperature (around 660° C) and medium pressure between (5 - 10 Kbar). On the other hand, Gidami granitoids were developed during the collision stage in continental arc regime related to active continental margin (Syn-orogeny), which were crystallized at relatively high temperature (700-720° C) and low pressure (around 0.1 Kbar). The ore mineralogy includes pyrite, chalcopyrite, sphalerite, covellite, ilmenite, goethite ± pyrrhotite ± pentlandite ± galena ± molybdenite. Native gold is detected only in Gidami mineralization as small inclusions within pyrite and goethite or as tiny grains scattered within quartz vein (in close proximity to the sulfides). In Fatira deposits, it is detected only by microprobe analysis within the crystal lattice of pyrite and jarosite. Fluid inclusions study for the mineralized ores revealed two main groups of fluid inclusions in both areas: A) Aqueous inclusions (H2O-NaCl±KCl system), and B) Carbonic inclusions (H2O-CO2-NaCl±CH4). A drop of pressure during the migration of these fluids to shallower depths along the shear zones was the main reason for phase separation. Isochores calculation from microthermometric results proved that, the P-T boundary conditions outlined for Fatira gold deposits are of 275° to 297° C and between (0.2 - 1.2 Kbar); and of 277° to 300° C and between (0.2 - 1 Kbar) for Gidami gold deposits. The normalization Chondrite patterns of rare earth elements (REEs) for the gold-ore deposits with the surrounding I-type granitic rocks exhibit an obvious similarity and positive correlation. The geological, mineralogical, geochemical and fluid inclusions studies revealed a genetic link between gold mineralization and intrusion of calc-alkaine granitic magma. Whereas, The granitic magma acts as a supplier for the ore-bearing fluid and as a heat source for metamorphic processes, leading to hydrothermal convection currents.

43 CFR 3832.22 - How much land may I include in my mining claim?

Code of Federal Regulations, 2011 CFR

2011-10-01

... claims. Lode claims must not exceed 1,500 by 600 feet. If there is a vein, lode, or ledge, each lode claim is limited to a maximum of 1,500 feet along the course of the vein, lode, or ledge and a maximum of 300 feet in width on each side of the middle of the vein, lode, or ledge. (b) Placer claims. (1...

Gold deposits in the Xiaoqinling-Xiong'ershan region, Qinling mountains, central China

USGS Publications Warehouse

Mao, J.; Goldfarb, R.J.; Zhang, Z.; Xu, W.; Qiu, Yumin; Deng, J.

2002-01-01

The gold-rich Xiaoqinling-Xiong'ershan region in eastern Shaanxi and western Henan provinces, central China, lies about 30-50 km inland of the southern margin of the North China craton. More than 100 gold deposits and occurrences are concentrated in the Xiaoqinling (west), Xiaoshan (middle), and Xiong'ershan (east) areas. Late Archean gneiss of the Taihua Group, and Middle Proterozoic metavolcanic rocks of the Xiong'er Group are the main host rocks for the deposits. Mesozoic granitoids (ca. 178-104 Ma) are present in most gold districts, but deposits are typically hosted in the Precambrian basement rocks hundreds of meters to as far as 10 km from the intrusions and related hornfels zones. Deposits in the Xiaoqinling and Xiaoshan areas are best classified as orogenic gold deposits, with ores occurring in a number of distinct belts both in quartz veins and disseminated in altered metamorphic rocks. Alteration assemblages are dominated by quartz, sericite, pyrite, and carbonate minerals. The ore-forming fluids were low salinity, CO2-rich, and characterized by isotopically heavy ??18O. Four deposits (Dongchuang, Wenyu, Yangzhaiyu, and Dahu) in the Xiaoqinling area each contain resources of about 1 Moz Au. Some of the gold deposits in the Xiong'ershan area represent more shallowly emplaced tellurium-enriched orogenic systems, which include resources of approximately 1-1.5 Moz Au at Shanggong and Beiling (or Tantou). Others are epithermal deposits (e.g., Qiyugou and Dianfang) that are hosted in volcanic breccia pipes. Isotopic dates for all gold deposits, although often contradictory, generally cluster between 172-99 Ma and are coeval with emplacement of the post-kinematic granitoids. The gold deposits formed during a period of relaxation of far-field compressional stresses, clearly subsequent to the extensive Paleozoic-early Mesozoic accretion of are terranes and the Yangtze craton onto the southern margin of the North China craton. Hydrothermal and magmatic events occurred locally where extension-related Precambrian basement uplifting took place along the craton margin. Fluids for the orogenic gold deposits in the Xiaoqinling, Xiaoshan, and Xiong'ershan areas may have been released from evolving magmas or resulted from prograde metamorphic reactions within the uplift zones. Alternatively, for the epithermal gold deposits at shallower levels in the Xiong'ershan area, gold-transporting fluids were mainly exsolved from coeval magmas, although meteoric water was also involved in these hydrothermal systems.

43 CFR 3862.1 - Lode claim patent applications: General.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 43 Public Lands: Interior 2 2012-10-01 2012-10-01 false Lode claim patent applications: General... LAND MANAGEMENT, DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) MINERAL PATENT APPLICATIONS Lode Mining Claim Patent Applications § 3862.1 Lode claim patent applications: General. ...

43 CFR 3862.1 - Lode claim patent applications: General.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 43 Public Lands: Interior 2 2011-10-01 2011-10-01 false Lode claim patent applications: General... LAND MANAGEMENT, DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) MINERAL PATENT APPLICATIONS Lode Mining Claim Patent Applications § 3862.1 Lode claim patent applications: General. ...

43 CFR 3862.1 - Lode claim patent applications: General.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 43 Public Lands: Interior 2 2014-10-01 2014-10-01 false Lode claim patent applications: General... LAND MANAGEMENT, DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) MINERAL PATENT APPLICATIONS Lode Mining Claim Patent Applications § 3862.1 Lode claim patent applications: General. ...

43 CFR 3862.1 - Lode claim patent applications: General.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 43 Public Lands: Interior 2 2013-10-01 2013-10-01 false Lode claim patent applications: General... LAND MANAGEMENT, DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) MINERAL PATENT APPLICATIONS Lode Mining Claim Patent Applications § 3862.1 Lode claim patent applications: General. ...

Gold potential in the Dalradian rocks of NW Northern Ireland: GIS-based prospectivity analysis using Tellus data

NASA Astrophysics Data System (ADS)

Lusty, P. A. J.; McDonnell, P. M.; Gunn, A. G.; Chacksfield, B. C.; Cooper, M.

2009-04-01

Geographic Information Systems (GIS) are essential tools for the management and integration of the large amounts of multivariate spatial data used in mineral exploration. Prospectivity analysis combines these datasets, in the context of a mineral deposit model, to produce a map showing the distribution of potential for a particular type of mineral deposit. In this example Arc-Spatial Data Modeller software has been used to analyse the prospectivity for orogenic vein gold mineralisation in the Dalradian rocks of north-western Northern Ireland. A knowledge-driven (fuzzy logic) approach was used because of the small number of gold deposits within the area. Fuzzy logic is used in situations where information is inexact and the use of classical set theory is inappropriate. Fuzzy logic allows assignment of weightings to exploration data on a continuous scale from 1 (full membership) to 0 (full non-membership). This allows a level of uncertainty or 'fuzziness' to be incorporated into the modelling. The key stages of prospectivity analysis are: (1) analysis of the deposit model to determine key exploration indicators; (2) data processing, interpretation and analysis to extract key indicators; (3) assignment of weightings, zones and styles of influence to key indicators; and (4) calculation of prospectivity. This research is based largely on new geochemical and geophysical data resulting from the Tellus Project in Northern Ireland. The Tellus Project involved geochemical and airborne geophysical surveys over the whole of Northern Ireland carried out between 2004-6 with funding from the Government of Northern Ireland. The study area (3074 km2) is underlain mainly by Neoproterozoic rocks of the Dalradian Supergroup (ca. 590 Ma) which form part of the Caledonide orogenic belt. The Dalradian Supergroup comprises a thick succession of semi-pelites, psammites and pelites, with graphitic pelite horizons that host much of the known gold mineralisation. In the Sperrin Mountains two advanced gold projects, Curraghinalt and Golan Burn, and an operating mine, Omagh (Cavanacaw), are hosted by Dalradian rocks. The Dalradian rocks of Northern Ireland were extensively deformed during the Grampian Orogeny and at least four phases of deformation are recognised. On a deposit scale distinct differences are observed between Curraghinalt and Cavanacaw including orientation of principal structures, mineralogy and geochemistry. The mineral prospectivity analysis integrated a range of datasets including: 1:250 000 scale geological mapping, mineral occurrences, fault vectors, Tellus drainage geochemistry and geophysics. In order to assess the differences between the Curraghinalt and Cavanacaw mineral deposit models separate prospectivity models were parameterised. The key differences between the two models relate to the weightings attached to the structural vectors and the significance given to particular chemical elements in the drainage geochemical dataset. The prospectivity analysis identified several areas prospective for orogenic-style gold mineralisation. Many of the prospective zones either coincide with known occurrences of orogenic gold mineralisation or areas considered highly prospective based upon previous work, validating the process and the model results. The use of specific models for the Curraghinalt and Cavanacaw deposits has produced significant differences in the location and extent of the target areas which provide a basis for focusing exploration for orogenic gold deposits in this region. Detailed examination of all available data and ground truthing is required in order to validate these targets. In addition to delineating new areas favourable for gold mineralisation the prospectivity mapping has provided new insight into possible regional controls on the location of mineralisation and into the geology of this area. Please fill in your abstract text.

Cyclical Fault Permeability in the Lower Seismogenic Zone: Geological Evidence

NASA Astrophysics Data System (ADS)

Sibson, R. H.

2005-12-01

Syntectonic hydrothermal veining is widespread in ancient fault zones exhibiting mixed brittle-ductile behavior that are exhumed from subgreenschist to greenschist environments. The hydrothermal material (predominantly quartz ± carbonate) commonly occurs as fault-veins developed along principal slip surfaces, with textures recording intermittent deposition, sometimes in the form of repeated episodes of brecciation and recementation. Systematic sets of extension veins with histories of incremental dilation often occur in adjacent wallrocks. Conspicuous for their size and continuity among these fault-hosted vein systems are mesozonal Au-quartz lodes, which are most widespread in Archean granite-greenstone belts but also occur throughout the geological record. Most of these lode gold deposits developed at pressures of 1-5 kbar and temperatures of 200-450°C within the lower continental seismogenic zone. A notable characteristic is their vertical continuity: many `ribbon-texture' fault veins with thicknesses of the order of a meter extend over depth ranges approaching 2 km. The largest lodes are usually hosted by reverse or reverse- oblique fault zones with low finite displacement. Associated flat-lying extension veins in the wallrock may taper away from the shear zones over tens or hundreds of meters, and demonstrate repeated attainment of the ~lithostatic fluid overpressures needed for hydraulic extension fracturing. Where hosted by extensional-transtensional fault systems, lode systems tend to be less well developed. Mesozonal vein systems are inferred to be the product of extreme fault-valve behavior, whereby episodic accumulation of pore-fluid pressure to near-lithostatic values over the interseismic period leads to fault rupture, followed by postseismic discharge of substantial fluid volumes along the freshly permeable rupture zone inducing hydrothermal precipitation that seals the fracture permeability. Aqueous mineralizing fluids were generally low-salinity and rich in CO2. Analysis of fluid inclusions suggests that cycling of fluid pressure, in at least some instances, spanned much of the lithostatic-hydrostatic range. While the mesozonal lodes appear to represent an extreme form of fault-valve behavior, minor valving action involving smaller fluid discharges seems likely to be widespread at this structural level in seismogenic crust. The vein systems themselves represent permeability barriers allowing accumulation of fluid overpressure in subseismogenic shear zones, and may occupy part or all of the transition zone between hydrostatic and lithostatic fluid pressure regimes.

Reconnaissance for radioactive deposits in Alaska, 1953

USGS Publications Warehouse

Matzko, John J.; Bates, Robert G.

1955-01-01

During the summer of 1953 the areas investigated for radioactive deposits in Alaska were on Nikolai Creek near Tyonek and on Likes Creek near Seward in south-central Alaska where carnotite-type minerals had been reported; in the headwaters of the Peace River in the eastern part of the Seward Peninsula and at Gold Bench on the South Fork of the Koyukuk River in east-central Alaska, where uranothorianite occurs in places associated with base metal sulfides and hematite; in the vicinity of Port Malmesbury in southeastern Alaska to check a reported occurrence of pitchblende; and, in the Miller House-Circle Hot Springs area of east-central Alaska where geochemical studies were made. No significant lode deposits of radioactive materials were found. However, the placer uranothorianite in the headwaters of the Peace River yet remains as an important lead to bedrock radioactive source materials in Alaska. Tundra cover prevents satisfactory radiometric reconnaissance of the area, and methods of geochemical prospecting such as soil and vegetation sampling may ultimately prove more fruitful in the search for the uranothorianite-sulfide lode source than geophysical methods.

The Laramide Caborca orogenic gold belt of northwestern Sonora, Mexico; white mica 40Ar/39Ar geochronology from gold-rich quartz veins

USGS Publications Warehouse

Izaguirre, Aldo; Kunk, Michael J.; Iriondo, Alexander; McAleer, Ryan J.; Caballero-Martinez, Juan Antonio; Espinosa-Arámburu, Enrique

2016-02-12

The COGB is approximately 600 kilometers long and 60 to 80 km wide, trends northwest, and extends from west-central Sonora to southern Arizona and California. The COGB contains mineralized gold-rich quartz veins that contain free gold associated with white mica (sericite), carbonate minerals (calcite and ankerite), and sulfides such as pyrite and galena. Limited geochronologic studies exist for parts of the COGB, and previous work was concentrated in mining districts. These previous studies recorded mineralization ages of approximately 70 to 40 Ma. Therefore, some workers proposed that the orogenic gold mineralization in the region occurred during a single pulse that was associated with the Laramide Orogeny that took place during the Cretaceous to early Eocene in the western margin of North America. However, the geochronologic dataset was quite limited, making any regional interpretations tenuous. Accordingly, one of the objectives of this geochronology study was to get a better representative sampling of the COGB in order to obtain a more complete record of the mineralization history. The 63 samples presented in this work are broadly distributed throughout the area of the COGB and allow us to better test the hypothesis that mineralization occurred in a single pulse.

Distribution of copper and other metals in gully sediments of part of Okanogan County, Washington

USGS Publications Warehouse

Fox, Kenneth F.; Rinehart, C. Dean

1972-01-01

A geochemical exploration program aimed at determining regional patterns of metal distribution as well as pinpointing areas likely to contain undiscovered ore deposits was carried out in north-central Okanogan County, Washington. About 1,000 gully and stream sediment samples were collected from a rectangular area of about 800 square miles. The area includes two contiguous, virtually dormant, mining districts that had yielded nearly $1.4 million in gold, silver, lead, copper, and zinc prior to the end of World War I, mostly from quartz lodes.

Mineral resource of the month: silver

USGS Publications Warehouse

Brooks, William E.

2007-01-01

Silver has been used for thousands of years as ornaments and utensils, for trade and as the basis of many monetary systems. The metal has played an important part in world history. Silver from the mines at Laurion, Greece, for example, financed the Greek victory over the Persians in 480 B.C. Silver from Potosi, Bolivia, helped Spain become a world power in the 16th and 17th centuries. And silver from the gold-silver ores at the Comstock Lode in Virginia City, Nev., helped keep the Union solvent during the Civil War.

The conjunction of factors that lead to formation of giant gold provinces and deposits in non-arc settings

USGS Publications Warehouse

Groves, David I.; Goldfarb, Richard J.; Santosh, M.

2016-01-01

In contrast to their province scale similarities, the different giant gold deposit styles show contrasting critical controls at the district to deposit scale. For orogenic gold deposits, the giants appear to have formed by conjunction of a greater number of parameters to those that control smaller deposits, with resultant geometrical and lithostratigraphic complexity as a guide to their location. There are few giant IRGS due to their inferior fluid-flux systems relative to orogenic gold deposits, and those few giants are essentially preservational exceptions. Many Carlin-type deposits are giants due to the exceptional conjunction of both structural and lithological parameters that caused reactive and permeable rocks, enriched in syngenetic gold, to be located below an impermeable cap along antiformal “trends”. Hydrocarbons probably played an important role in concentrating metal. The supergiant Post-Betze deposit has additional ore zones in strain heterogeneities surrounding the pre-gold Goldstrike stock. All unequivocal IOCG deposits are giant or near-giant deposits in terms of gold-equivalent resources, partly due to economic factors for this relatively poorly understood, low Cu-Au grade deposit type. The supergiant Olympic Dam deposit, the most shallowly formed deposit among the larger IOCGs, probably owes its origin to eruption of volatile-rich hybrid magma at surface, with formation of a large maar and intense and widespread brecciation, alteration and Cu-Au-U deposition in a huge rock volume.

Metabasalts as sources of metals in orogenic gold deposits

NASA Astrophysics Data System (ADS)

Pitcairn, Iain K.; Craw, Dave; Teagle, Damon A. H.

2015-03-01

Although metabasaltic rocks have been suggested to be important source rocks for orogenic gold deposits, the mobility of Au and related elements (As, Sb, Se, and Hg) from these rocks during alteration and metamorphism is poorly constrained. We investigate the effects of increasing metamorphic grade on the concentrations of Au and related elements in a suite of metabasaltic rocks from the Otago and Alpine Schists, New Zealand. The metabasaltic rocks in the Otago and Alpine Schists are of MORB and WPB affinity and are interpreted to be fragments accreted from subducting oceanic crust. Gold concentrations are systematically lower in the higher metamorphic grade rocks. Average Au concentrations vary little between sub-greenschist (0.9 ± 0.5 ppb) and upper greenschist facies (1.0 ± 0.5 ppb), but decrease significantly in amphibolite facies samples (0.21 ± 0.07 ppb). The amount of Au depleted from metabasaltic rocks during metamorphism is on a similar scale to that removed from metasedimentary rocks in Otago. Arsenic concentrations increase with metamorphic grade with the metabasaltic rocks acting as a sink rather than a source of this element. The concentrations of Sb and Hg decrease between sub-greenschist and amphibolite facies but concentration in amphibolite facies rocks are similar to those in unaltered MORB protoliths and therefore unaltered oceanic crust cannot be a net source of Sb and Hg in a metamorphic environment. The concentrations of Au, As, Sb, and Hg in oceanic basalts that have become integrated into the metamorphic environment may be heavily influenced by the degree of seafloor alteration that occurred prior to metamorphism. We suggest that metasedimentary rocks are much more suitable source rocks for fluids and metals in orogenic gold deposits than metabasaltic rocks as they show mobility during metamorphism of all elements commonly enriched in this style of deposit.

Gold deposit styles and placer gold characterisation in northern and east-central Madagascar

USGS Publications Warehouse

Pitfield, Peter E. J; Styles, Michael T.; Taylor, Cliff D.; Key, Roger M.; Bauer,; Ralison, A

2009-01-01

Microchemical characterisation of bedrock and placer gold grains from six gold districts within the Archaean domains and intervening Neoproterozoic Anaboriana-Manampotsy belt of northern and east-central Madagascar show few opaque inclusions (e.g pyrrhotite, Bi tellurides) but wide range of Ag contents (40wt%). Some districts exhibit multiple source populations of grains. The ‘greenstone belt’ terranes have an orogenic gold signature locally with an intrusion-related to epithermal overprint. Proterozoic metasediments with felsic to ultramafic bodies yield dominantly intrusion-related gold. A high proportion of secondary gold (<0.5wt% Ag) is related to recycling of paleoplacers and erosion of post-Gondwana planation surfaces and indicates that some mesothermal gold systems were already partially to wholly removed by erosion by the PermoTriassic.

A synthesis of mineralization styles and geodynamic settings of the Paleozoic and Mesozoic metallic ore deposits in the Altay Mountains, NW China

NASA Astrophysics Data System (ADS)

Yang, Fuquan; Geng, Xinxia; Wang, Rui; Zhang, Zhixin; Guo, Xuji

2018-06-01

The Altay Mountains within the Xinjiang region of northwestern China hosts major metallic ore deposits. Here we review the geological characteristics, metallogenic features and tectonic settings of these deposits. The metallic ore deposits in the Altay Mountains occur mainly within four regions: North Altay, Central Altay, South Altay and Erqis. We recognize seven types of metallic ore deposits in the Altay Mountains: VMS, submarine volcanogenic iron, magmatic, skarn, pegmatite, hydrothermal vein (Cu-Zn, Fe) and orogenic gold. Among these types, the VMS, pegmatite, orogenic gold and skarn deposits are the most common. Most of the rare metal pegmatite deposits are distributed in Central Altay, with only a few in South Altay. The VMS, submarine volcanogenic type iron and skarn-type deposits are distributed in South Altay, whereas the orogenic-type gold deposits are distributed in the Erqis Fault belt. The hydrothermal vein-type deposits occur in the Erqis Fault belt and Chonghu'er Basin in South Altay. Magmatic-type deposits are mostly in the Erqis Fault belt and Central Altay. Based on isotopic age data, the VMS, submarine volcanogenic-type Fe and skarn-type Cu, Pb, Zn, Fe mineralization occurred during Early-Middle Devonian (∼410-377 Ma), orogenic-type Au, magmatic-type Cu-Ni, and a small number of skarn-type Fe, hydrothermal vein-type Cu-Zn, pegmatite-type rare-metal deposits in Early-Middle Permian (293-261 Ma), pegmatite-type rare-metal deposits, few skarn-type Fe deposit in Early-Middle Triassic (248-232 Ma), and dominantly represented by pegmatite-type rare-metal deposits in Late Triassic-Early Jurassic (223-180 Ma). The metallic ore deposits in the Altay Mountains formed in various tectonic settings, such as the Early-Middle Devonian continental arc and oceanic island arc, Early-Middle Permian post-collisional extensional setting, and Triassic-Early Jurassic intracontinental setting.

78 FR 29155 - Notice of Filing of Plats of Survey; Montana

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-17

..., representing the dependent resurvey of M.S. No. 551, Strawberry Lode; M.S. No. 780, Strawberry Lode; M.S. No.781, Strawberry Extension Lode; M.S. No. 2599B, Clipper Mill Site; M.S. No. 2617B, Rustler Mill Site...

43 CFR 3832.20 - Lode and placer mining claims.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 43 Public Lands: Interior 2 2011-10-01 2011-10-01 false Lode and placer mining claims. 3832.20... MANAGEMENT, DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) LOCATING MINING CLAIMS OR SITES Types of Mining Claims § 3832.20 Lode and placer mining claims. ...

Uniformity in sulfur isotope composition in the orogenic gold deposits from the Dharwar Craton, southern India

NASA Astrophysics Data System (ADS)

Sakthi Saravanan, C.; Mishra, B.

2009-07-01

The sulfur isotope composition of sulfides (mainly pyrite and arsenopyrite) from gold deposits/prospects of the Dharwar Craton such as Hutti, Hira-Buddini, Uti, Kolar (Chigargunta), Ajjanahalli, and Jonnagiri has a narrow range (δ34S = +1.1 to +7.1‰). Such craton-scale uniformity of the above gold camps is noteworthy, in spite of the wide diversity in host rock compositions and their metamorphic conditions, and suggests a magmatic or average crustal source of sulfur for all deposits studied. In addition, our study points towards gold precipitation from reduced ore fluids, with near-homogeneous sulfur isotope compositions.

Geological controls on refractory ore in an orogenic gold deposit, Macraes mine, New Zealand

NASA Astrophysics Data System (ADS)

Petrie, B. S.; Craw, D.; Ryan, C. G.

2005-07-01

The Macraes mine is hosted in an orogenic (mesothermal) gold deposit in metasedimentary rocks of the Otago Schist belt. Much gold occurs within altered schist with minimal silica-addition, and this study focuses on altered schist ore types. The unmineralized host schists are chemically and mineralogically uniform in composition, but include two end-member rock types: feldspathic schist and micaceous schist. Both rock types have undergone hydrothermal alteration along a shallow-dipping foliation-parallel shear zone, but their different rheological properties have affected the style of mineralisation. Micaceous schist has been extensively recrystallized and hydrothermally altered during ductile deformation, to form ores characterized by abundant, disseminated millimetre-scale pyrite cubes (typically 1 2 wt% S) and minor silicification. The earliest pyrite contained Ni and/or As in solid solution and no gold was imaged in these pyrites or later arsenopyrite grains. The ore type is refractory and gold recovery by cyanide leaching is less than 50%, with lowest recovery in rocks that have been less affected by later brittle deformation. In contrast, hydrothermally altered feldspathic schist is characterized by mineralised black microshears and veinlets formed during shear-zone related brittle deformation. Microsheared ore has relatively low sulphur content (<0.7 wt%) and muscovite has been illitised during hydrothermal alteration. Pyrite and arsenopyrite in microshears are fractured and deformed, and contain 1 10 μm blebs of gold. Later pyrite veinlets also contain micron- to submicron-scale inclusions of sphalerite, chalcopyrite, galena, and gold (≤10 microns). Gold in microsheared ore is more readily recoverable than in the refractory ore, although encapsulation of the fine gold grains inhibits cyanidation. Both microsheared ore and disseminated pyritic ore pass laterally into mineralised black shears, which contain hydrothermal graphite and late-stage cataclastic sulphides. This black, sheared ore releases gold readily, but the gold is then adsorbed on to gangue minerals (preg-robbed) and net cyanidation recovery can be less than 50%. Hence, low gold recovery during cyanidation results from (1) poor liberation of gold encapsulated in microcrystalline quartz and unfractured sulphide grains, and (2) preg-robbing of liberated gold during cyanidation. Introduction of pressure-oxidation of ore prior to cynidation has mitigated these issues.

The Kharapeh orogenic gold deposit: Geological, structural, and geochemical controls on epizonal ore formation in West Azerbaijan Province, Northwestern Iran

USGS Publications Warehouse

Niroomand, Shojaeddin; Goldfarb, Richard J.; Moore, Farib; Mohajjel, Mohammad; Marsh, Erin E.

2011-01-01

The Kharapeh gold deposit is located along the northwestern margin of the Sanandaj–Sirjan Zone (SSZ) in the West Azerbaijan province, Iran. It is an epizonal orogenic gold deposit formed within the deformed zone between central Iran and the Arabian plate during the Cretaceous–Tertiary Zagros orogeny. The deposit area is underlain by Cretaceous schist and marble, as well as altered andesite and dacite dikes. Structural analysis indicates that the rocks underwent tight to isoclinal recumbent folding and were subsequently co-axially refolded to upright open folds during a second deformation. Late- to post-tectonic Cenozoic granites and granodiorites occur northeast of the deposit area. Mineralization mainly is recognized within NW-trending extensional structures as veins and breccia zones. Normal faults, intermediate dikes, and quartz veins, oriented subparallel to the axial surface of the Kharapeh antiform, indicate synchronous extension perpendicular to the fold axis during the second folding event. The gold-bearing quartz veins are >1 km in length and average about 6 m in width; breccia zones are 10–50 m in length and ≤1 m in width. Hydrothermal alteration mainly consists of silicification, sulfidation, chloritization, sericitization, and carbonatization. Paragenetic relationships indicate three distinct stages—replacement and silicification, brecciation and fracture filling, and cataclastic brecciation—with the latter two being gold-rich. Fluid inclusion data suggest mineral deposition at temperatures of at least 220–255°C and depths of at least 1.4–1.8 km, from a H2O–CO2±CH4 fluid of relatively high salinity (12–14 wt.% NaCl equiv.), which may reflect metamorphism of passive margin carbonate sequences. Ore fluid δ18O values between about 7‰ and 9‰ suggest no significant meteoric water input, despite gold deposition in a relatively shallow epizonal environment. Similarities to other deposits in the SSZ suggest that the deposit formed as part of a diachronous gold event during the middle to late Tertiary throughout the SSZ and during the final stages of the Zagros orogeny. The proximity of Kharapeh to the main tectonic suture of the orogen, well-developed regional fold systems with superimposed complex fracture geometries, and recognition of nearby volcanogenic massive sulfide systems that suggest a region characterized by sulfur- and metal-rich crustal rocks, collectively indicate an area of the SSZ with high favorability for undiscovered gold resources.

Effects of mother lode-type gold mineralization on 187Os/188Os and platinum group element concentrations in peridotite: Alleghany District, California

USGS Publications Warehouse

Walker, R.J.; Böhlke, J.K.; McDonough, W.F.; Li, Ji

2007-01-01

Osmium isotope compositions and concentrations of Re, platinum group elements (PGE), and Au were determined for host peridotites (serpentinites and barzburgites) and hydrothermally altered ultramafic wall rocks associated with Mother Lode-type hydrothermal gold-quartz vein mineralization in the Alleghany district, California. The host peridotites have Os isotope compositions and Re, PGE, and Au abundances typical of the upper mantle at their presumed formation age during the late Proterozoic or early Paleozoic. The hydrothermally altered rocks have highly variable initial Os isotope compositions with ??os, values (% deviation of 187OS/188OS from the chondritic average calculated for the approx. 120 Ma time of mineralization) ranging from -1.4 to -8.3. The lowest Os isotope compositions are consistent with Re depletion of a chondritic source (e.g., the upper mantle) at ca. 1.6 Ga. Most of the altered samples are enriched in Au and have depleted and fractionated abundances of Re and PGE relative to their precursor peridotites. Geoehemical characteristics of the altered samples suggest that Re and some PGE were variably removed from the ultramafic rocks during the mineralization event. In addition to Re, the Pt and Pd abundances of the most intensely altered rocks appear to have been most affected by mineralization. The 187Os-depleted isotopic compositions of some altered rocks are interpreted to be a result of preferential 187Os loss via destruction of Re-rich phases during the event. For these rocks, Os evidently is not a useful tracer of the mineralizing fluids. The results do, however, provide evidence for differential mobility of these elements, and mobility of 187Os relative to the initial bulk Os isotope composition during hydrothermal metasomatic alteration of ultramafic rocks. ?? 2007 Society of Economic Geologists, Inc.

76 FR 13600 - Payette National Forest, Idaho, Golden Hand #3 and #4 Lode Mining Claims, Plan of Operations

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-14

.... 3 and No. 4 Lode Mining Claims Proposed Plan of Operations. The project included mining operations on the lode claims along with associated activities such as road maintenance and construction. The... Mining Claims, Plan of Operations AGENCY: Forest Service, USDA. ACTION: Notice of withdrawal. SUMMARY...

Gold deposits in metamorphic belts: Overview of current understanding, outstanding problems, future research, and exploration significance

USGS Publications Warehouse

Groves, D.I.; Goldfarb, R.J.; Robert, F.; Hart, C.J.R.

2003-01-01

Metamorphic belts are complex regions where accretion or collision has added to, or thickened, continental crust. Gold-rich deposits can be formed at all stages of orogen evolution, so that evolving metamorphic belts contain diverse gold deposit types that may be juxtaposed or overprint each other. This partly explains the high level of controversy on the origin of some deposit types, particularly those formed or overprinted/remobilized during the major compressional orogeny that shaped the final geometry of the hosting metamorphic belts. These include gold-dominated orogenic and intrusion-related deposits, but also particularly controversial gold deposits with atypical metal associations. There are a number of outstanding problems for all types of gold deposits in metamorphc belts. These include the following: (1) definitive classifications, (2) unequivocal recognition of fluid and metal sources, (3) understanding of fluid migration and focusing at all scales, (4) resolution of the precise role of granitoid magmatism, (5) precise gold-depositional mechanisms, particularly those producing high gold grades, and (6) understanding of the release of CO2-rich fluids from subducting slabs and subcreted oceanic crust and granitoid magmas at different crustal levels. Research needs to be better coordinated and more integrated, such that detailed fluid-inclusion, trace-element, and isotopic studies of both gold deposits and potential source rocks, using cutting-edge technology, are embedded in a firm geological framework at terrane to deposit scales. Ultimately, four-dimensional models need to be developed, involving high-quality, three-dimensional geological data combined with integrated chemical and fluid-flow modeling, to understand the total history of the hydrothermal systems involved. Such research, particularly that which can predict superior targets visible in data sets available to exploration companies before discovery, has obvious spin-offs for global- to deposit-scale targeting of deposits with superior size and grade in the covered terranes that will be the exploration focus of the twenty-first century.

Geochemistry of shale and sedimentary pyrite as a proxy for gold fertility in the Selwyn basin area, Yukon

NASA Astrophysics Data System (ADS)

Sack, Patrick J.; Large, Ross R.; Gregory, Daniel D.

2018-01-01

Selwyn basin area strata contain sedimentary pyrite with Au above background levels when analyzed by laser ablation-inductively coupled mass spectrometry. Hyland Group rocks contain framboidal pyrite contents of 670 ppb Au, 1223 ppm As, and 5.3 ppm Te; the mean of all types of sedimentary pyrite in the Hyland Group is 391 ppb Au, 1489 ppm As, and 3.8 ppm Te. These levels are similar to sedimentary pyrite in host lithologies from major orogenic gold districts in New Zealand and Australia. Comparison of whole rock and pyrite data show that rocks deposited in continental slope settings with significant terrigenous input contain pyrite that is consistently enriched in Au, As, Te, Co, and Cu. Although data are limited, whole rock samples of stratigraphic units containing Au-rich pyrite also contain high Au, indicating that most of the Au is within sedimentary pyrite. Based on geologic characteristics and comparison of pyrite chemistry data with whole rock chemistry, Selwyn basin area strata have the necessary ingredients to form orogenic gold deposits: Au-enriched source rocks, metamorphic conditions permissive of forming a metamorphic ore fluid, and abundant structural preparation for channeling fluids and depositing ore.

Volcanogenic massive sulphide and orogenic gold deposits of northern southeast Alaska

USGS Publications Warehouse

Sack, Patrick J; Karl, Susan M.; Steeves, Nathan; Gemmell, J Bruce

2016-01-01

This five-day field trip visits the most significant mineral deposits in northern southeast Alaska. The trip begins and ends with regional transects in the interior Intermontane terranes around Whitehorse, Yukon, and the Insular terranes along the northern Chatham Strait region of southeast Alaska (Fig. A-1 and Fig. A-2; Plate-1). To put the deposits in a regional tectonic framework, the guidebook begins with an introduction to northern Cordilleran geology, tectonics and metallogeny. The foci of the deposit portion of the field trip are Late Triassic volcanogenic massive sulphide (VMS) deposits of the Alexander Triassic metallogenic belt and Paleogene orogenic gold deposits of the Juneau gold belt. Details of the local geology are further elaborated in each segment of the guide book (Days 1-5). The data that provide the basis for the VMS deposit interpretations come from a series of PhD and MSc studies by the Centre of Excellence in Ore Deposit Research (CODES) at the University of Tasmania and the University of Ottawa. These deposit-scale studies are complimented by a long history of regional mapping and research by the U.S. Geological Survey (USGS).

Mineral resource potential map of the Benton Range Roadless Area, Mono County, California

USGS Publications Warehouse

Donahoe, James L.; McKee, Edwin D.; Rains, Richard L.; Barnes, Donald J.; Campbell, Harry W.; Denton, David K.; Iverson, Stephen R.; Jeske, Rodney E.; Stebbins, Scott A.

1983-01-01

Tungsten-bearing rocks in the Benton Range Roadless Area occur in tactite lenses within the Paleozoic metasedimentary units that surround and are intruded by Triassic granodiorite of the Benton Range. High anomalous tungsten values were found in the southern part of the study area. Quartz-vein deposits with copper, lead, zinc, and silver may occur within the Jurassic granitic rock in the northwestern part of the area. Stream-sediment and panned-concentrate samples from the northwestern part of the roadless area, reveal anomalous values in a number of elements. Some of these elements are indicative of mineral suites that form by hydrothermal alteration and are potential metallic-ore producers. Metals having anomalous values are antimony, copper, lead, molybdenum, tin, and zinc; their presence suggests the potential for deposits of the lead-zinc-silver or copper-molybdenum type. Molybdenum and lead were identified by geochemical sampling as having low to moderate potential in the roadless area. An estimated 190,000 tons (172,000 t) of subeconomic gold and silver resources are inside the roadless area at the Gold Crown, Gold Webb, and Gold Wedge mines; another 60,000 tons (54,000 t) of subeconomic gold and silver resources are just outside the area at the Tower, Gold Webb, and Gold Wedge mines (table 1). Most of the lode gold and silver deposits are in quartz veins and shear zones. Minor amounts of copper, lead, and zinc occur in some gold deposits. About 2,240 oz (70 kg) of gold, 8,450 oz (260 kg) of silver, and 4,600 lb of lead (2,090 kg) have been produced from the roadless area. In addition, 7,257 oz (226 kg) of gold and 350 oz (11 kg) silver were produced at the Tower mine, near the area.

Physical and chemical controls on ore shoots - insights from 3D modeling of an orogenic gold deposit

NASA Astrophysics Data System (ADS)

Vollgger, S. A.; Tomkins, A. G.; Micklethwaite, S.; Cruden, A. R.; Wilson, C. J. L.

2016-12-01

Many ore deposits have irregular grade distributions with localized elongate and well-mineralized rock volumes commonly referred to as ore shoots. The chemical and physical processes that control ore shoot formation are rarely understood, although transient episodes of elevated permeability are thought to be important within the brittle and brittle-ductile crust, due to faulting and fracturing associated with earthquake-aftershock sequences or earthquake swarms. We present data from an orogenic gold deposit in Australia where the bulk of the gold is contained in abundant fine arsenopyrite crystals associated with a fault-vein network within tight upright folds. The deposit-scale fault network is connected to a deeper network of thrust faults (tens of kilometers long). Using 3D implicit modeling of geochemical data, based on radial basis functions, gold grades and gold-arsenic element ratios were interpolated and related to major faults, vein networks and late intrusions. Additionally, downhole bedding measurements were used to model first order (mine-scale) fold structures. The results show that ore shoot plunges are not parallel with mine-scale or regional fold plunges, and that bedding parallel faults related to flexural slip folding play a pivotal role on ore shoot attitudes. 3D fault slip and dilation tendency analysis indicate that fault reactivation and formation of linking faults are associated with large volumes of high-grade ore. We suggest slip events on the large-scale thrust network allowed mineralizing fluids to rapidly migrate over large distances and become supersaturated in elements such as gold, promoting widespread precipitation and high nucleation densities of arsenopyrite upon fluid-rock interaction at trap sites within the deposit.

Mineral equilibria and zircon, garnet and titanite U-Pb ages constraining the PTt path of granite-related hydrothermal systems at the Big Bell gold deposit, Western Australia

NASA Astrophysics Data System (ADS)

Mueller, Andreas G.; McNaughton, Neal J.

2018-01-01

The Big Bell deposit (75 t gold) is located in a narrow spur of the Meekatharra greenstone belt, Yilgarn Craton, Western Australia. Two ore bodies are located in a calcic-potassic contact alteration zone overprinting lineated granodiorite dykes and amphibolite: almandine-cummingtonite-hornblende skarn (1-3 g/t Au, 1700 g/t As, 330 g/t W) and the muscovite-microcline gneiss (3-5 g/t Au, 580 g/t Sb, 620 g/t W) of the Main Lode. Genetic models vary from pre- to post-metamorphic replacement. Hornblende-plagioclase pairs in amphibolite constrain peak metamorphic temperature to 670 ± 50 °C. In contrast, garnet-biotite thermometry provides estimates of 578 ± 50 and 608 ± 50 °C for garnet-cordierite-biotite schist bordering the skarn and enveloping the Main Lode. Garnet-cordierite and garnet-hornblende pairs extend the range of fluid temperature to 540 ± 65 °C, well below peak metamorphic temperature. At 540-600 °C, the alteration assemblage andalusite + sillimanite constrains pressure to 300-400 MPa corresponding to 11-14 km crustal depth. Published U-Pb ages indicate that metamorphism took place in the aureole of the southeast granodiorite-tonalite batholith (2740-2700 Ma), followed by gold mineralization at 2662 ± 5 Ma and by the emplacement of biotite granite and Sn-Ta-Nb granite-pegmatite dykes at 2625-2610 Ma. Amphibolite xenoliths in granite northwest of the deposit record the lowest temperature (628 ± 50 °C), suggesting it lacks a metamorphic aureole. The rare metal dykes are spatially associated with epidote-albite and andradite-diopside skarns (≤1.5 g/t Au), mined where enriched in the weathered zone. We analysed hydrothermal zircon intergrown with andradite. Concordant U-Pb ages of 2612 ± 7 and 2609 ± 10 Ma confirm the presence of a second granite-related system. The zircons display oscillatory zoning and have low Th/U ratios (0.05-0.08). Low-Th titanite from an albite granite dyke has a concordant but reset U-Pb age of 2577 ± 7 Ma.

Noble gases fingerprint a metasedimentary fluid source in the Macraes orogenic gold deposit, New Zealand

NASA Astrophysics Data System (ADS)

Goodwin, Nicholas R. J.; Burgess, Ray; Craw, Dave; Teagle, Damon A. H.; Ballentine, Chris J.

2017-02-01

The world-class Macraes orogenic gold deposit (˜10 Moz resource) formed during the late metamorphic uplift of a metasedimentary schist belt in southern New Zealand. Mineralising fluids, metals and metalloids were derived from within the metasedimentary host. Helium and argon extracted from fluid inclusions in sulphide mineral grains (three crush extractions from one sample) have crustal signatures, with no evidence for mantle input (R/Ra = 0.03). Xenon extracted from mineralised quartz samples provides evidence for extensive interaction between fluid and maturing organic material within the metasedimentary host rocks, with 132Xe/36Ar ratios up to 200 times greater than air. Similarly, I/Cl ratios for fluids extracted from mineralised quartz are similar to those of brines from marine sediments that have interacted with organic matter and are ten times higher than typical magmatic/mantle fluids. The Macraes mineralising fluids were compositionally variable, reflecting either mixing of two different crustal fluids in the metasedimentary pile or a single fluid type that has had varying degrees of interaction with the host metasediments. Evidence for additional input of meteoric water is equivocal, but minor meteoric incursion cannot be discounted. The Macraes deposit formed in a metasedimentary belt without associated coeval magmatism, and therefore represents a purely crustal metamorphogenic end member in a spectrum of orogenic hydrothermal processes that can include magmatic and/or mantle fluid input elsewhere in the world. There is no evidence for involvement of minor intercalated metabasic rocks in the Macraes mineralising system. Hydrothermal fluids that formed other, smaller, orogenic deposits in the same metamorphic belt have less pronounced noble gas and halogen evidence for crustal fluid-rock interaction than at Macraes, but these deposits also formed from broadly similar metamorphogenic processes.

76 FR 5202 - Notice of Temporary Restriction of Discharge of Firearms on Public Lands at Kanaka Valley, El...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-28

...) is in effect on public lands in the Kanaka Valley administered by the Mother Lode Field Office... Valley. This restriction order will be posted in the Mother Lode BLM Field Office. Maps of the affected... U.S.C. 1733(a), 43 CFR 8360.0-7 and 8364.1. William Haigh, Field Manager, Mother Lode BLM Field...

Structural, mineralogical and geochemical constraints on the atypical komatiite-hosted Turret deposit in the Agnew-Mt. White district, Western Australia

NASA Astrophysics Data System (ADS)

Voute, F.; Thébaud, N.

2015-08-01

In the Norseman-Wiluna belt, Yilgarn Craton, the Agnew-Mt. White district is the host of many gold deposits. Located in the hinge of the regional Lawlers anticline, the Turret gold deposit is structurally controlled by the Table Hill shear zone that transects the Agnew Ultramafic unit. Geochemistry, coupled with petrographic data, allowed the delineation of the paragenetic sequence associated with gold mineralisation and include (1) a pervasive talc-carbonate alteration assemblage, (2) a pre-mineralisation stage associated with pervasive arsenopyrite + chalcopyrite + pyrrhotite + pyrite alteration, followed by (3) a late deformation event along a dilatational segment of the main Table Hill shear zone, leading to the formation of a breccia hosting a Cu-Bi-Mo-Au (± Ag ± Zn ± Te ± W) metal assemblage. The presence of Au-Ag-Cu alloys, native bismuth, chalcopyrite and other Bi-Te-S phases in the mineralisation stage suggest that gold may have been scavenged from the hydrothermal fluids by composite Bi-Te-Cu-Au-Ag-S liquids or melts. Using this mineral paragenetic sequence, together with mineralogical re-equilibration textures observed, we show that the gold deposition at Turret occurred over a temperature range approximately between c. 350 and 270 °C. This temperature range, together with the structural control and typical mesothermal alteration pattern including carbonate-chlorite alteration, shows that the Turret deposit shares common characteristics with the orogenic gold deposit class. However, the metal association of Cu, Au, Bi, and Mo, the quartz-poor, and high copper-sulphide content (up to 15 %) are characteristics that depart from the typical orogenic gold deposit mineralogy. Through comparison with similar deposits in the Yilgarn Craton and worldwide, we propose that the Turret deposit represents an example of a porphyry-derived Au-Cu-Bi-Mo deposit.

The dilemma of the Jiaodong gold deposits: Are they unique?

USGS Publications Warehouse

Goldfarb, Richard J.; Santosh, M.

2013-01-01

The ca. 126–120 Ma Au deposits of the Jiaodong Peninsula, eastern China, define the country's largest gold province with an overall endowment estimated as >3000 t Au. The vein and disseminated ores are hosted by NE- to NNE-trending brittle normal faults that parallel the margins of ca. 165–150 Ma, deeply emplaced, lower crustal melt granites. The deposits are sited along the faults for many tens of kilometers and the larger orebodies are associated with dilatational jogs. Country rocks to the granites are Precambrian high-grade metamorphic rocks located on both sides of a Triassic suture between the North and South China blocks. During early Mesozoic convergent deformation, the ore-hosting structures developed as ductile thrust faults that were subsequently reactivated during Early Cretaceous “Yanshanian” intracontinental extensional deformation and associated gold formation.Classification of the gold deposits remains problematic. Many features resemble those typical of orogenic Au including the linear structural distribution of the deposits, mineralization style, ore and alteration assemblages, and ore fluid chemistry. However, Phanerozoic orogenic Au deposits are formed by prograde metamorphism of accreted oceanic rocks in Cordilleran-style orogens. The Jiaodong deposits, in contrast, formed within two Precambrian blocks approximately 2 billion years after devolatilization of the country rocks, and thus require a model that involves alternative fluid and metal sources for the ores. A widespread suite of ca. 130–123 Ma granodiorites overlaps temporally with the ores, but shows a poor spatial association with the deposits. Furthermore, the deposit distribution and mineralization style is atypical of ores formed from nearby magmas. The ore concentration requires fluid focusing during some type of sub-crustal thermal event, which could be broadly related to a combination of coeval lithospheric thinning, asthenospheric upwelling, paleo-Pacific plate subduction, and seismicity along the continental-scale Tan-Lu fault. Possible ore genesis scenarios include those where ore fluids were produced directly by the metamorphism of oceanic lithosphere and overlying sediment on the subducting paleo-Pacific slab, or by devolatilization of an enriched mantle wedge above the slab. Both the sulfur and gold could be sourced from either the oceanic sediments or the serpentinized mantle. A better understanding of the architecture of the paleo-Pacific slab during Early Cretaceous below the eastern margin of China is essential to determination of the validity of possible models.

Significant Metalliferous and Selected Non-Metalliferous Lode Deposits, and Selected Placer Districts of Northeast Asia

USGS Publications Warehouse

Ariunbileg, Sodov; Biryul'kin, Gennandiy V.; Byamba, Jamba; Davydov, Yury V.; Dejidmaa, Gunchin; Distanov, Elimir G.; Dorjgotov, Dangindorjiin; Gamyanin, Gennadiy N.; Gerel, Ochir; Fridovskiy, Valeriy Y.; Gotovsuren, Ayurzana; Hwang, Duk-Hwan; Kochnev, Anatoliy P.; Kostin, Alexei V.; Kuzmin, Mikhail I.; Letunov, Sergey A.; Jiliang, Li; Xujun, Li; Malceva, Galina D.; Melnikov, V.D.; Nikitin, Valeriy; Obolenskiy, Alexander A.; Ogasawara, Masatsugu; Orolmaa, Demberel; Parfenov, Leonid M.; Popov, Nikolay V.; Prokopiev, Andrei V.; Ratkin, Vladimir; Rodionov, Sergey M.; Seminskiy, Zhan V.; Shpikerman, Vladimir I.; Smelov, Alexander P.; Sotnikov, Vitaly I.; Spiridonov, Alexander V.; Stogniy, Valeriy V.; Sudo, Sadahisa; Fengyue, Sun; Jiapeng, Sun; Weizhi, Sun; Supletsov, Valeriy M.; Timofeev, Vladimir F.; Tyan, Oleg A.; Vetluzhskikh, Valeriy G.; Aihua, Xi; Yakovlev, Yakov V.; Hongquan, Yan; Zhizhin, Vladimir I.; Zinchuk, Nikolay N.; Zorina, Lydia M.

2003-01-01

Introduction This report contains a digtial database on lode deposits and placer districts of Northeast Asia. This region includes Eastern Siberia, Russian Far East, Mongolia, Northeast China, South Korea, and Japan. In folders on this site are a detailed database, a bibliography of cited references, descriptions of mineral deposit models, and a mineral deposit location map. Data are provided for 1,674 significant lode deposits and 91 significant placer districts of the region.

Assessment method for epithermal gold deposits in Northeast Washington State using weights-of-evidence GIS modeling

USGS Publications Warehouse

Boleneus, D.E.; Raines, G.L.; Causey, J.D.; Bookstrom, A.A.; Frost, T.P.; Hyndman, P.C.

2001-01-01

The weights-of-evidence analysis, a quantitative mineral resource mapping tool, is used to delineate favorable areas for epithermal gold deposits and to predict future exploration activity of the mineral industry for similar deposits in a four-county area (222 x 277 km), including the Okanogan and Colville National Forests of northeastern Washington. Modeling is applied in six steps: (1) building a spatial digital database, (2) extracting predictive evidence for a particular deposit, based on an exploration model, (3) calculating relative weights for each predictive map, (4) combining the geologic evidence maps to predict the location of undiscovered mineral resources and (5) measuring the intensity of recent exploration activity by use of mining claims on federal lands, and (6) combining mineral resource and exploration activity into an assessment model of future mining activity. The analysis is accomplished on a personal computer using ArcView GIS platform with Spatial Analyst and Weights-of-Evidence software. In accord with the descriptive model for epithermal gold deposits, digital geologic evidential themes assembled include lithologic map units, thrust faults, normal faults, and igneous dikes. Similarly, geochemical evidential themes include placer gold deposits and gold and silver analyses from stream sediment (silt) samples from National Forest lands. Fifty mines, prospects, or occurrences of epithermal gold deposits, the training set, define the appropriate a really-associated terrane. The areal (or spatial) correlation of each evidential theme with the training set yield predictor theme maps for lithology, placer sites and normal faults. The weights-of-evidence analysis disqualified the thrust fault, dike, and gold and silver silt analyses evidential themes because they lacked spatial correlation with the training set. The decision to accept or reject evidential themes as predictors is assisted by considering probabilistic data consisting of weights and contrast values calculated for themes according to areal correlation with the training sites. Predictor themes having acceptable weights and contrast values are combined into a preliminary model to predict the locations of undiscovered epithermal gold deposits. This model facilitates ranking of tracts as non-permissive, permissive or favorable categories based on exclusionary, passive, and active criteria through evaluation of probabilistic data provided by interaction of predictor themes. The method is very similar to the visual inspection method of drawing conclusions from anomalies on a manually overlain system of maps. This method serves as a model for future mineral assessment procedures because of its objective nature. To develop a model to predict future exploration activity, the locations of lode mining claims were summarized for 1980, 1985, 1990, and 1996. Land parcels containing historic claims were identified either as those with mining claims present in 1980 or valid claims present in 1985. Current claim parcels were identified as those containing valid lode claims in either 1990 or 1996. A consistent parcel contains both historic and current claims. The epithermal gold and mining claim activity models were combined into an assessment (or mineral resource-activity) model to assist in land use decisions by providing a prediction of mineral exploration activity on federal land in the next decade. Ranks in the assessment model are: (1) no activity, (2) low activity, (3) low to moderate activity, (4) moderate activity and (5) high activity.

Geologic map of the Weka Dur gold deposit, Badakhshan Province, Afghanistan, modified from the 1967 original map compilation of M.P. Guguev and others

USGS Publications Warehouse

Peters, Stephen G.; Stettner, Will R.; Masonic, Linda M.

2014-01-01

The Weka Dur gold deposit lies in a cluster of other gold deposits in Badakhshan Province (Ragh district), such as the Kadar, Nesheb Dur, and Rishaw gold occurrences. These gold occurrences lie within a zone of late Hercynian folding and are most likely related to fluids that originated from orogenic processes. The Weka Dur deposit is the largest recorded gold occurrence in Afghanistan and is hosted in Proterozoic mica schist and amphibolite that is intruded by diabase dikes and other intrusive rocks. The tabular orebody is 350 meters (m) long and 2 m wide and can be traced downdip for 110 m. Mineralization consists of ochreous, brecciated schists containing high gold concentrations along gently and steeply dipping fissures. The brecciated rocks grade to 46.7 grams per ton (g/t) silver and contain arsenopyrite, galena, chalcopyrite, and scheelite. Trenches and adits were constructed, mapped, and sampled during the 1960s. Calculated resources are 958.3 kilograms of gold, averaging 4.1 g/t gold.

Geodynamic setting of mesothermal gold deposits: An association with accretionary tectonic regimes

NASA Astrophysics Data System (ADS)

Kerrich, Robert; Wyman, Derek

1990-09-01

Mesothermal gold provinces of Phanerozoic age are characteristically associated with regional structures along which allochthonous terranes have been accreted onto continental margins or arcs. A recurring sequence of transpressive deformation, uplift, late kinematic mineralization, and shoshonitic magmatism is consistent with thermal reequilibration of tectonically thickened crust. Mesothermal gold camps in the Superior province are spatially associated with large-scale structures that have been interpreted as zones of transpressive accretion of individual subprovinces or allochthonous terranes: these boundary structures are characterized by the sequence of significant horizontal shortening, uplift, late-kinematic mineralization, and shoshonitic lamprophyres and therefore may have the same geodynamic significance as Phanerozoic counterparts. In this model, thermal re-equilibration of underplated and subducted oceanic lithosphere and sediments in a transpressive regime, over time scales of 10 to 40 m.y., is a necessary precursor to gold mineralization. Hydrothermal fluids are released along boundary faults and their splays during uplift: the uniform temperature, low salinity and mole% CO2 signify uniform source conditions, whereas the variable O, C, Sr, and Pb isotopic compositions of fluids reflect lithological complexity of the source regions and conduits. Ou the basis of this model it is suggested that mesothermal lode gold deposits are the product of subduction-related crustal underplating and deep, late metamorphism, rather than magmatic or metamorphic events in the supracrustal rocks. Secular variations in the generation of Archean, Proterozoic, and Phanerozoic mesothermal Au provinces reflect the timing of collisional orogenies within terranes of these eras.

Mercury Contamination from Historic Gold Mining in California

USGS Publications Warehouse

Alpers, Charles N.; Hunerlach, Michael P.

2000-01-01

Mercury contamination from historic gold mines represents a potential risk to human health and the environment. This fact sheet provides background information on the use of mercury in historic gold mining and processing operations in California, and describes a new USGS project that addresses the potential risks associated with mercury from these sources, with emphasis on historic hydraulic mining areas. Miners used mercury (quicksilver) to recover gold throughout the western United States at both placer (alluvial) and hardrock (lode) mines. The vast majority of mercury lost to the environment in California was from placer-goldmines, which used hydraulic, drift, and dredging methods. At hydraulic mines, placer ores were broken down with monitors (or water cannons, fig. 1) and the resulting slurry was directed throughsluices and drainage tunnels, where goldparticles combined with liquid mercury to form gold?mercury amalgam. Loss ofmercury in this process was 10 to 30 percent per season (Bowie, 1905), resulting in highly contaminated sediments at mine sites (fig. 2). Elevated mercury concentrations in present-day mine waters and sediments indicate thathundreds to thousands of pounds of mercury remain at each of the many sites affected by hydraulic mining. High mercury levels in fish, amphibians, and invertebrates downstream of the hydraulic mines are a consequence of historic mercury use. On the basis of USGS studies and other recent work, a better understanding is emerging of mercury distribution, ongoing transport, transformation processes, and the extent of biological uptake in areas affected by historic gold mining. This information will be useful to agencies responsible for prudent land and resource management and for protecting public health.

Mineral resources of the Turtle Mountains Wilderness Study Area, San Bernardino County, California

USGS Publications Warehouse

Howard, Keith A.; Nielson, Jane E.; Simpson, Robert W.; Hazlett, Richard W.; Alminas, Henry V.; Nakata, John K.; McDonnell, John R.

1988-01-01

At the request of the U.S. Bureau of Land Management, approximately 105,200 acres of the Turtle Mountains Wilderness Study Area (CDCA-307) were evaluated for mineral resources (known) and resource potential (undiscovered). In this report, the area studied is referred to as "the wilderness study area" or simply "the study area"; any reference to the Turtle Mountain Wilderness Study Area refers only to that part of the wilderness study area for which a mineral survey was requested by the U.S. Bureau of Land Management.The wilderness study area is in southeastern San Bernardino County, Calif. Gold, silver, copper, and lead have been mined within and adjacent to the study area. Copper-zinc-silver-gold mineral occurrences are found in the southern part and gold-silver mineral occurrences are found in the northern part of the study area; identified low- to moderate-grade gold-silver resources occur adjacent to the study area along the western boundary. Six areas in the south-central and northwestern parts of the study area have high resource potential, two broad areas have moderate resource potential, and part of the southwest corner has low resource potential for lode gold, silver, and associated copper, lead, zinc, molybdenum, and tungsten. Alluvium locally within one of these areas has moderate resource potential for placer gold and silver, and the entire area has low resource potential for placer gold and silver. There is low resource potential for perlite, ornamental stone (onyx marble and opal), manganese, uranium and thorium, pegmatite minerals, and oil and gas within the study area. Sand and gravel are abundant but are readily available outside the wilderness study area.

Gold grade variation and particle microchemistry in exploration pits of the Batouri gold district, SE Cameroon

NASA Astrophysics Data System (ADS)

Vishiti, A.; Suh, C. E.; Lehmann, B.; Egbe, J. A.; Shemang, E. M.

2015-11-01

The Batouri area hosts lode-gold mineralization under several-m-thick lateritic cover. Pitting to bed rock on a geochemical Au anomaly defined from previous reconnaissance soil sampling identified five horizons ranging from saprock at the base to laterite at the top. Analysis of bulk samples from each horizon by fire assay shows that most of the horizons are barren although 119 ppb and 48 ppb Au values were obtained from one laterite horizon and one saprolite horizon, respectively, from two separate pits. All the horizons were panned and particulate gold was also recovered only from these two horizons. The gold grains from both horizons are morphologically and compositionally indistinguishable with rare quartz, pyrite and galena inclusions. The grains have irregular, sub-rounded, bean to elongated shapes and they show a remarkable core-rim zonation. Electron microprobe analysis of the grains recorded high gold content in the rims (86.3-100 wt%) and along fissures within the grains (95.1-100 wt%). The cores are relatively Ag rich (11.8-14 wt% Ag) while the rims (0.63-13.7 wt% Ag, most of the values fall within the lower limit of this range) and fissures (0.03-5.02 wt% Ag) are poor in Ag. The low Ag concentration in the rims and along fissures is attributed to preferential leaching of Ag; a process recognized in gold grains and platiniferous alloys from alluvia. The core composition of the grains is similar to that of primary gold composition in the bedrock. These results show that gold in the soil is relic particulate gold derived from the primary source with no evidence of secondary gold precipitation in the weathering cycle. In all the pits no horizon was systematically enriched in gold suggesting there has been no chemical remobilization of gold in this environment. Rather the dispersion of gold here is in the particulate form. Therefore combining particulate gold features with assay data is relevant to exploration in such tropical environments.

Stable Isotopes (O, H, and S) in the Muteh Gold Deposit, Golpaygan Area, Iran

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abdollahi, M. J.; Karimpour, M. H.; Kheradmand, A.

2009-06-15

The Muteh gold district with nine gold deposits is located in the Sanandaj-Sirjan metamorphic zone. Gold mineralization occurs in a pre-Permian complex which mainly consists of green schists, meta-volcanics, and gneiss rocks. Shear zones are the host of gold mineralization. Gold paragenesis minerals include pyrite, chalcopyrite, pyrrhotite, and secondary minerals. Pyrites occur as pre-, syn-, and post-metamorphism minerals. To determine the source of the ore-bearing fluids, fifty samples were selected for petrographical and stable isotope studies. The mean values of 12.4 per mille , and -42 per mille for {delta}{sup 18}O and {delta}D isotopes, respectively, and a mean value ofmore » 7.75 per mille of calculated fractionation factors for {delta}{sup 18}O H{sub 2}O, from quartz veins indicate that metamorphic host rocks are the most important source for the fluids and gold mineralization. Three generations of pyrite can be distinguished showing a wide range of {delta}{sup 34}S. Gold mineralization is closely associated with intense hydrothermal alteration along the ductile shear zones. The characteristics of the gold mineralization in the study area are similar to those of orogenic gold deposits elsewhere.« less

Geologic history of the Blackbird Co-Cu district in the Lemhi subbasin of the Belt-Purcell Basin

USGS Publications Warehouse

Bookstrom, Arthur A.; Box, Stephen E.; Cossette, Pamela M.; Frost, Thomas P.; Gillerman, Virginia; King, George; Zirakparvar, N. Alex

2016-01-01

The Blackbird cobalt-copper (Co-Cu) district in the Salmon River Mountains of east-central Idaho occupies the central part of the Idaho cobalt belt—a northwest-elongate, 55-km-long belt of Co-Cu occurrences, hosted in grayish siliciclastic metasedimentary strata of the Lemhi subbasin (of the Mesoproterozoic Belt-Purcell Basin). The Blackbird district contains at least eight stratabound ore zones and many discordant lodes, mostly in the upper part of the banded siltite unit of the Apple Creek Formation of Yellow Lake, which generally consists of interbedded siltite and argillite. In the Blackbird mine area, argillite beds in six stratigraphic intervals are altered to biotitite containing over 75 vol% of greenish hydrothermal biotite, which is preferentially mineralized.Past production and currently estimated resources of the Blackbird district total ~17 Mt of ore, averaging 0.74% Co, 1.4% Cu, and 1.0 ppm Au (not including downdip projections of ore zones that are open downward). A compilation of relative-age relationships and isotopic age determinations indicates that most cobalt mineralization occurred in Mesoproterozoic time, whereas most copper mineralization occurred in Cretaceous time.Mesoproterozoic cobaltite mineralization accompanied and followed dynamothermal metamorphism and bimodal plutonism during the Middle Mesoproterozoic East Kootenay orogeny (ca. 1379–1325 Ma), and also accompanied Grenvilleage (Late Mesoproterozoic) thermal metamorphism (ca. 1200–1000 Ma). Stratabound cobaltite-biotite ore zones typically contain cobaltite1 in a matrix of biotitite ± tourmaline ± minor xenotime (ca. 1370–1320 Ma) ± minor chalcopyrite ± sparse allanite ± sparse microscopic native gold in cobaltite. Such cobaltite-biotite lodes are locally folded into tight F2 folds with axial-planar S2 cleavage and schistosity. Discordant replacement-style lodes of cobaltite2-biotite ore ± xenotime2 (ca. 1320–1270 Ma) commonly follow S2fractures and fabrics. Discordant quartz-biotite and quartz-tourmaline breccias, and veins contain cobaltite3 ± xenotime3 (ca. 1058–990 Ma).Mesoproterozoic cobaltite deposition was followed by: (1) within-plate plutonism (530–485 Ma) and emplacement of mafic dikes (which cut cobaltite lodes but are cut by quartz-Fe-Cu-sulfide veins); (2) garnet-grade metamorphism (ca. 151–93 Ma); (3) Fe-Cu-sulfide mineralization (ca. 110–92 Ma); and (4) minor quartz ± Au-Ag ± Bi mineralization (ca. 92–83 Ma).Cretaceous Fe-Cu-sulfide vein, breccia, and replacement-style deposits contain various combinations of chalcopyrite ± pyrrhotite ± pyrite ± cobaltian arsenopyrite (not cobaltite) ± arsenopyrite ± quartz ± siderite ± monazite (ca. 144–88 Ma but mostly 110–92 Ma) ± xenotime (104–93 Ma). Highly radiogenic Pb (in these sulfides) and Sr (in siderite) indicate that these elements resided in Mesoproterozoic source rocks until they were mobilized after ca. 100 Ma. Fe-Cu-sulfide veins, breccias, and replacement deposits appear relatively undeformed and generally lack metamorphic fabrics.Composite Co-Cu-Au ore contains early cobaltite-biotite lodes, cut by Fe-Cu-sulfide veins and breccias, or overprinted by Fe-Cu-sulfide replacement-style deposits, and locally cut by quartz veinlets ± Au-Ag ± Bi minerals.

Recent U.S. Geological Survey Studies in the Tintina Gold Province, Alaska, United States, and Yukon, Canada-Results of a 5-Year Project

USGS Publications Warehouse

Gough, Larry P.; Day, Warren C.

2010-01-01

This report presents summary papers of work conducted between 2002 and 2007 under a 5-year project effort funded by the U.S. Geological Survey Mineral Resources Program, formerly entitled 'Tintina Metallogenic Province: Integrated Studies on Geologic Framework, Mineral Resources, and Environmental Signatures.' As the project progressed, the informal title changed from 'Tintina Metallogenic Province' project to 'Tintina Gold Province' project, the latter being more closely aligned with the terminology used by the mineral industry. As Goldfarb and others explain in the first chapter of this report, the Tintina Gold Province is a convenient term used by the mineral exploration community for a 'region of very varied geology, gold deposit types, and resource potential'. The Tintina Gold Province encompasses roughly 150,000 square kilometers, bounded by the Kaltag-Tintina fault system on the north and the Farewell-Denali fault system on the south. It extends westward in a broad arc, some 200 km wide, from northernmost British Columbia, through the Yukon, through southeastern and central Alaska, to southwestern Alaska. The climate is subarctic and, in Alaska, includes major physiographic delineations and ecoregions such as the Yukon-Tanana Upland, Tanana-Kuskokwim Lowlands, Yukon River Lowlands, and the Kuskokwim Mountains. Although the Tintina Gold Province is historically important for some of the very first placer and lode gold discoveries in northern North America, it has recently seen resurgence in mineral exploration, development, and mining activity. This resurgence is due to both new discoveries (for example, Pogo and Donlin Creek) and to the application of modern extraction methods to previously known, but economically restrictive, low-grade, bulk-tonnage gold resources (for example, Fort Knox, Clear Creek, and Scheelite Dome). In addition, the Tintina Gold Province hosts numerous other mineral deposit types, possessing both high and low sulfide content, which are not currently in development.

View north from within mining cut; portal of Fowler Lode ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

View north from within mining cut; portal of Fowler Lode Adit (6'-long range pole for scale) - Steamboat Mine, Southeast slope of Steamboat Mountain, west of the junction of Forest Service Roads 1000300 and 1000365, Jacksonville, Jackson County, OR

View north from portal of Fowler Lode Adit, showing section ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

View north from portal of Fowler Lode Adit, showing section of tunnel interior (6'-long range pole for scale) - Steamboat Mine, Southeast slope of Steamboat Mountain, west of the junction of Forest Service Roads 1000300 and 1000365, Jacksonville, Jackson County, OR

Morphogenesis and grain size variation of alluvial gold recovered in auriferous sediments of the Tormes Basin (Iberian Peninsula) using a simple correspondence analysis

NASA Astrophysics Data System (ADS)

Barrios, S.; Merinero, R.; Lozano, R.; Orea, I.

2015-12-01

With present techniques it is difficult to determine whether the gold particles present at fluvial placers have come from one or multiple sources. Knowledge of this would be useful in prospecting for larger gold deposits. The aim of the present work was to test the potential of a technique based on modern visual and classic statistical methods to determine the single or multisource origin of gold particles at different sites in the Tormes Basin (Central Iberian Zone of the Iberian Massif, Iberian Peninsula). This basin contains numerous lode and placer gold deposits that have been exploited since ancient times. Today, gold nuggets (usually associated with quartz, 0.2-6 g in weight, 0.53-3.74 cm long and mostly discoidal in shape and of intermediate roundness) can be recovered from the sediments of the upper reaches of the River Tormes. These nuggets, as well as small gold particles collected at three gravel pits from across the basin (all of which showed abrasion marks) were examined by optical and/or environmental scanning electron microscopy, and the differences in their dimensions and morphological features noted. Simple correspondence analysis of the sphericity and roundness of the nuggets and particles was used to morphologically classify the gold samples collected at each location. The gold nuggets were best classified as elongated rods of intermediate roundness. Surprisingly, the gold particles from the most upstream and downstream gravel pits were best described as discs/sub-discs of rounded appearance, while those from the intermediate gravel pit were discs of intermediate roundness. Analysis of the variance followed by the Tukey honest significant differences test revealed the particles from the most upstream gravel pit to be significantly more flattened and smaller. These were therefore transported further from their source than the particles collected at the other two pits. These results suggest that multiple sources of sedimentary gold exist in the Tormes Basin and that these feed these different gravel pits. Present techniques for classifying gold would not have detected these differences.

Structural localization and origin of compartmentalized fluid flow, Comstock lode, Virginia City, Nevada

USGS Publications Warehouse

Berger, B.R.; Tingley, J.V.; Drew, L.J.

2003-01-01

Bonanza-grade orebodies in epithermal-style mineral deposits characteristically occur as discrete zones within spatially more extensive fault and/or fracture systems. Empirically, the segregation of such systems into compartments of higher and lower permeability appears to be a key process necessary for high-grade ore formation and, most commonly, it is such concentrations of metals that make an epithermal vein district world class. In the world-class silver- and gold-producing Comstock mining district, Nevada, several lines of evidence lead to the conclusion that the Comstock lode is localized in an extensional stepover between right-lateral fault zones. This evidence includes fault geometries, kinematic indicators of slip, the hydraulic connectivity of faults as demonstrated by veins and dikes along faults, and the opening of a normal-fault-bounded, asymmetric basin between two parallel and overlapping northwest-striking, lateral- to lateral-oblique-slip fault zones. During basin opening, thick, generally subeconomic, banded quartz-adularia veins were deposited in the normal fault zone, the Comstock fault, and along one of the bounding lateral fault zones, the Silver City fault. As deformation continued, the intrusion of dikes and small plugs into the hanging wall of the Comstock fault zone may have impeded the ability of the stepover to accommodate displacement on the bounding strike-slip faults through extension within the stepover. A transient period of transpressional deformation of the Comstock fault zone ensued, and the early-stage veins were deformed through boudinaging and hydraulic fragmentation, fault-motion inversion, and high- and low-angle axial rotations of segments of the fault planes and some fault-bounded wedges. This deformation led to the formation of spatially restricted compartments of high vertical permeability and hydraulic connectivity and low lateral hydraulic connectivity. Bonanza orebodies were formed in the compartmentalized zones of high permeability and hydraulic connectivity. As heat flow and related hydrothermal activitv waned along the Comstock fault zone, extension was reactivated in the stepover along the Occidental zone of normal faults east of the Comstock fault zone. Volcanic and related intrusive activity in this part of the stepover led to a new episode of hydrothermal activity and formation of the Occidental lodes.

Metalliferous lode deposits of Alaska

USGS Publications Warehouse

Berg, Henry C.; Cobb, Edward Huntington

1967-01-01

This report summarizes from repoAs of Federal and State agencies published before August 31, 1965, the geology of Alaska's metal-bearing lodes, including their structural or stratigraphic control, host rock, mode of origin, kinds of .Q minerals, grade, past production, and extent of exploration. In addition, the lists of mineral occurrences that accompany the 35 mineral-deposit location maps constitute an inventory of the State's known lodes. A total of 692 localities where m&alliferous deposits have been found are shown on the maps. The localities include 1,739 mines, prospects, and reported occurrences, of which 821 are described individually or otherwise cited in the text.

Mineral commodity profiles: Silver

USGS Publications Warehouse

Butterman, W.C.; Hilliard, Henry E.

2005-01-01

Overview -- Silver is one of the eight precious, or noble, metals; the others are gold and the six platinum-group metals (PGM). World mine production in 2001 was 18,700 metric tons (t) and came from mines in 60 countries; the 10 leading producing countries accounted for 86 percent of the total. The largest producer was Mexico, followed by Peru, Australia, and the United States. About 25 percent of the silver mined in the world in 2001 came from silver ores; 15 percent, from gold ores and the remaining 60 percent, from copper, lead, and zinc ores. In the United States, 14 percent of the silver mined in 2001 came from silver ores; 39 percent, from gold ores; 10 percent, from copper and copper-molybdenum ores; and 37 percent, from lead, zinc, and lead-zinc ores. The precious metal ores (gold and silver) came from 30 lode mines and 10 placer mines; the base-metal ores (copper, lead, molybdenum, and zinc) came from 24 lode mines. Placer mines yielded less than 1 percent of the national silver production. Silver was mined in 12 States, of which Nevada was by far the largest producer; it accounted for nearly one-third of the national total. The production of silver at domestic mines generated employment for about 1,100 mine and mill workers. The value of mined domestic silver was estimated to be $290 million. Of the nearly 27,000 t of world silver that was fabricated in 2001, about one-third went into jewelry and silverware, one-fourth into the light-sensitive compounds used in photography, and nearly all the remainder went for industrial uses, of which there were 7 substantial uses and many other small-volume uses. By comparison, 85 percent of the silver used in the United States went to photography and industrial uses, 8 percent to jewelry and silverware, and 7 percent to coins and medals. The United States was the largest consumer of silver followed by India, Japan, and Italy; the 13 largest consuming countries accounted for nearly 90 percent of the world total. In the United States, about 30 companies accounted for more than 90 percent of the silver fabricated. The consumption of silver for all fabrication uses is expected to grow slowly through the decade ending in 2010 at about 1.3 percent per year for the world and 2.4 percent per year for the United States. World and U.S. reserves and reserve bases are more than adequate to satisfy the demand for newly mined silver through 2010. The other components of supply will be silver recovered from scrap, silver from industrial stocks, and silver bullion that is sold into the market from commodity exchange and private stocks.

View west from USFS Road 369 toward Fowler Lode Adit ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

View west from USFS Road 369 toward Fowler Lode Adit and O'Brien Ditch (left) and open-pit excavation (top-center, beyond trees); ridge saddle is in center - Steamboat Mine, Southeast slope of Steamboat Mountain, west of the junction of Forest Service Roads 1000300 and 1000365, Jacksonville, Jackson County, OR

Geology and mineral deposits of the Jabal ash Shumta quadrangle, Kingdom of Saudi Arabia

USGS Publications Warehouse

Hummel, C.L.; Ankary, Abdullah O.

1972-01-01

Rocks, structures, and mineral deposits which are the result of both the older Halaban petro-tectonic cycle and the younker Najd Wrench Fault deformation are present in the Ash Shumta area. Northward-trending belts of granitic rocks and folded, layered metavolcanic and metasedimentary rocks of the Halaban Formation which they intrude represent the effects of the Halaban cycle. These older rocks are everywhere transected and deformed by northwestward- and northeastward-striking fractures and strike-slip faults and by eastward-striking fractures and fracture-controlled silicic dikes which belong to the Najd Wrench Fault deformation. Several kinds of epigenetic mineral deposits of hydrothermal origin are present throughout the Ash Shumta area. All occur in or ape closely associated with structures of the Najd Wrench Fault deformation. The mineralization which produced the deposits is thought to have taken place during the period of deformation which produced the Najd Wrench Fault structures. The hydrothermal deposits include many metalliferous quartz veins most of which occur in three mineralized areas: two major areas at Jabal Ash Shumta and Jabal El Khom in the northern half of the quadrangle and a minor area along Wadj al Boharah in the southeastern part of the quadrangle. The metalliferous lodes possess the only economic potential in the area of the Jabal Ash Shumta quadrangle. These lodes consist mainly of gold and base metal-bearing quartz veins, some of which were mined for gold in ancient times. The mineralized area at Jabal Ash Shumta has the best of these veins. Higher temperature veins with wolframite as a major constituent and beryl as a minor one occur in a granite cupola in the eastern part of the El Khom area. These veins have altered, gneissen-like wall rocks. Although the grade of the veins is low at the surface, the made could increase at depth. The tungsten-bearing veins and El Khom area possess the greatest economic promise in the Jabal Ash Shumta quadrangle. They deserve detailed surface investigation followed if needed by exploration at depth.

Pyrite deformation and connections to gold mobility: insight from micro-structural analysis and trace element mapping

NASA Astrophysics Data System (ADS)

Dubosq, Renelle; Rogowitz, Anna; Lawley, Christopher; Schneider, David; Jackson, Simon

2017-04-01

Pyrite is an important and ubiquitous gold-bearing phase in many orogenic gold deposits making the study of its deformation behaviour under metamorphic conditions crucial to the understanding of gold (re)mobilization. However, pyrite deformation mechanisms and their influence on the retention or release of trace elements during deformation and metamorphism remain poorly understood. We propose a syn- to post-peak metamorphic and deformation driven gold upgrading model where gold is remobilized through deformation-induced diffusion pathways in the form of substructures in pyrite. The middle amphibolite facies assemblage (actinolite-biotite-plagioclase-almandine) of the Detour Lake deposit (Canada) makes it an ideal study area due to maximum temperatures reaching 550°C, exceeding the conditions for plastic deformation in pyrite (450°C). The world-class Detour Lake deposit, containing 16.4 Moz of Au at 1 g/t, is a Neoarchean orogenic gold ore body located in the northern Abitibi district within the Superior Province. The mine is situated along the high strain, sub-vertical ductile-brittle Sunday Lake Deformation Zone (SLDZ) parallel to the broadly E-W trending Abitibi greenstone belt. Herein we combine orientation contrast (OC) forescatter imaging, electron backscatter diffraction (EBSD) and 2D laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) trace element pyrite mapping to evaluate the influence of pyrite brittle and plastic deformation on the release of trace elements during syn-metamorphic gold remobilization. Local misorientation patterns in pyrite exhibit parallel bands that can be described by continuous rotation around one of the <100> axes, whereas higher strain areas reveal more heterogeneous misorientation patterns and the development of low-angle grain boundaries with late fractures indicative of dislocation creep and strain hardening. These late fractures are an important micro-structural setting for gold and clusters of precious-metal mineral inclusions (telluride minerals). Minor recrystallization processes can also be observed along phase boundaries between pyrite and more competent amphibole crystals. LA-ICP-MS trace element maps document primary, syn-metamorphic oscillatory zoning of some chalcophile and siderophile elements during crystallization of pyrite porphyroblasts. These primary pyrite features are cut by late metal-rich fractures suggesting that remobilization of gold occurred with trace element enrichment of other chalcophile and siderophile elements (Cu, Pb, Zn, Ag, Bi, Te), which post-dates the main period of syn-metamorphic pyrite crystallization at the margins of pre- to syn-deformation, high-grade gold veins. Pyrite grain boundaries and subgrains are also base and precious metal rich, suggesting that late gold remobilization also occurred during pyrite recrystallization. Additional trace element mapping will help determine to what extent pyrite plastic deformation facilitates the diffusion of gold and other trace elements during gold precipitation and remobilization, which, in turn, will inform the source to sink pathways of ore deposition.

Stream-Sediment Geochemistry in Mining-Impacted Drainages of the Yankee Fork of the Salmon River, Custer County, Idaho

USGS Publications Warehouse

Frost, Thomas P.; Box, Stephen E.

2009-01-01

This reconnaissance study was undertaken at the request of the USDA Forest Service, Region 4, to assess the geochemistry, in particular the mercury and selenium contents, of mining-impacted sediments in the Yankee Fork of the Salmon River in Custer County Idaho. The Yankee Fork has been the site of hard-rock and placer mining, primarily for gold and silver, starting in the 1880s. Major dredge placer mining from the 1930s to 1950s in the Yankee Fork disturbed about a 10-kilometer reach. Mercury was commonly used in early hard-rock mining and placer operations for amalgamation and recovery of gold. During the late 1970s, feasibility studies were done on cyanide-heap leach recovery of gold from low-grade ores of the Sunbeam and related deposits. In the mid-1990s a major open-pit bulk-vat leach operation was started at the Grouse Creek Mine. This operation shut down when gold values proved to be lower than expected. Mercury in stream sediments in the Yankee Fork ranges from below 0.02 ppm to 7 ppm, with the highest values associated with old mill locations and lode and placer mines. Selenium ranges from below the detection limit for this study of 0.2 ppm to 4 ppm in Yankee Fork sediment samples. The generally elevated selenium content in the sediment samples reflect the generally high selenium contents in the volcanic rocks that underlie the Yankee Fork and the presence of gold and silver selenides in some of the veins that were exploited in the early phases of mining.

Geochemical evolution of a high arsenic, alkaline pit-lake in the Mother Lode Gold District, California

USGS Publications Warehouse

Savage, Kaye S.; Ashley, Roger P.; Bird, Dennis K.

2009-01-01

The Harvard orebody at the Jamestown gold mine, located along the Melones fault zone in the southern Mother Lode gold district, California, was mined in an open-pit operation from 1987 to 1994. Dewatering during mining produced a hydrologic cone of depression; recovery toward the premining ground-water configuration produced a monomictic pit lake with alkaline Ca-Mg-HCO3-SO4–type pit water, concentrations of As up to 1,200 μg/L, and total dissolved solids (TDS) up to 2,000 mg/L. In this study, pit-wall rocks were mapped and chemically analyzed to provide a context for evaluating observed variability in the composition of the pit-lake waters in relationship to seasonal weather patterns. An integrated hydrogeochemical model of pit-lake evolution based on observations of pit-lake volume, water composition (samples collected between 1998–2000, 2004), and processes occurring on pit walls was developed in three stages using the computer code PHREEQC. Stage 1 takes account of seasonally variable water fluxes from precipitation, evaporation, springs, and ground water, as well as lake stratification and mixing processes. Stage 2 adds CO2fluxes and wall-rock interactions, and stage 3 assesses the predictive capability of the model.Two major geologic units in fault contact comprise the pit walls. The hanging wall is composed of interlayered slate, metavolcanic and metavolcaniclastic rocks, and schists; the footwall rocks are chlorite-actinolite and talc-tremolite schists generated by metasomatism of greenschist-facies mafic and ultramafic igneous rocks. Alteration in the ore zone provides evidence for mineralizing fluids that introduced CO2, S, and K2O, and redistributed SiO2. Arsenian pyrite associated with the alteration weathers to produce goethite and jarosite on pit walls and in joints, as well as copiapite and hexahydrite efflorescences that accumulate on wall-rock faces during dry California summers. All of these pyrite weathering products incorporate arsenic at concentrations from <100 up to 1,200 ppm. In the pit lake, pH and TDS reach seasonal highs in the summer epilimnion; pH is lowest in the summer hypolimnion. Arsenic and bicarbonate covary in the hypolimnion, rising as stratification proceeds and declining during winter rains. The computational model suggests that water fluxes alone do not account for this seasonal variability. Loss of CO2 to the atmosphere, interaction with pit walls including washoff of efflorescent salts during the first flush and seasonal rainfall, and arsenic sorption appear to contribute to the observed pit-lake characteristics.

Metamorphism and gold mineralization in the Blue Ridge, Southernmost Appalachians

USGS Publications Warehouse

Stowell, H.H.; Lesher, C.M.; Green, N.L.; Sha, P.; Guthrie, G.M.; Sinha, A.K.

1996-01-01

Lode gold mineralization in the Blue Ridge of the southernmost Appalachians is hosted by metavolcanic rocks (e.g., Anna Howe mine, AL; Royal Vindicator mine, GA), metaplutonic rocks (e.g., Hog Mountain mine, AL), and metasedimentary rocks (e.g., Lowe, Tallapoosa, and Jones Vein mines, AL). Most gold occurs in synkinematic quartz ?? plagioclase ?? pyrite ?? pyrrhotite ?? chlorite veins localized along polydeformational faults that juxtapose rocks with significantly different peak metamorphic mineral assemblages. Mineralogy, chemistry, and O and H isotope studies suggest that the three types of host rocks have undergone differing amounts and types of alteration during mineralization. Limited wall-rock alteration in metavolcanic- and metasediment-hosted deposits, and relatively extensive wall-rock alteration in granitoid-hosted deposits, suggests that most deposits formed from fluids that were close to equilibrium with metavolcanic and metasedimentary rocks. Stable isotope compositions of the fluids calculated from vein minerals and vein selvages are consistent with a predominantly metasedimentary fluid source, but vary from deposit to deposit (-22 to -47??? ??D, 4-5??? ??18O, and 5-7??? ??34S at Anna Howe and Royal Vindicator; -48 to -50??? ??D, 9-13??? ??18O, and ca. 19??? ??34S at Lowe and Jones Vein; and -22 to -23??? ??D, 8-11??? ??18O, 9-10??? ??34S, and -6 ??13C at Hog Mountain). Silicate mineral thermobarometry of vein, vein selvage, and wall-rock mineral assemblages indicate that mineralization and regional metamorphism occured at greenschist to amphibolite facies (480?? ?? 75??C at Anna Howe, 535?? ?? 50??C at 6.4 ?? 1 kbars at Lowe, 530?? ?? 50??C at 6.9 ?? 1 kbars at Tallapoosa, and 460?? ?? 50??C at 5.5 ?? 1 kbars at Hog Mountain). Oxygen isotope fractionation between vein minerals and selvage minerals consistently records equilibration temperatures that are similar to or slightly lower than those estimated from silicate thermometry. Auriferous veins contain numerous fluid inclusions that were emplaced in several stages and can be subdivided into five compositional types based on salt and CO2 concentrations. Fluid inclusion isochores for early formed inclusions from these veins intercept the pressure and temperature conditions estimated from silicate mineral thermobarometry and stable isotope thermometry, and are compatible with entrapment at those conditions. These fluids exhibit significant variation in salinity (XNaClequiv = 0.0-0.2) and CO2 (XCO2 = 0.0-0.2), suggesting variation in fluid-wall-rock interaction that accompanied gold deposition during declining temperatures. Less abundant and later fluids within the veins are dominantly CO2. The association of gold mineralization with structurally controlled concordant and discordant quartz sulfide veins, and the temperatures and pressures of wall-rock alteration and regional metamorphism indicate that the present distribution of gold is a result of metamorphism during progressive D2-D3 deformation. Isotopic data for alteration envelopes date this event as Alleghanian: 279 ?? 14 Ma (K-Ar whole rock) and 343 ?? 18 Ma (K-Ar biotite) at Lowe; and 315 ?? 18 Ma (Rb-Sr whole-rock isochron; 87Sr/86Sr, = 0.7061 ?? 0.0008) and 294 ?? 16 Ma (K-Ar whole-rock) at Hog Mountain. Available data are compatible with development of the lodes during early Alleghanian overthrusting of allochthons over sedimentary rocks of the autochthonous North American margin. The implication is that the fluids were derived from metasedimentary and/or metavolcanic formations in the lower parts of the crystalline thrust stack (or possibly from underlying autochthonous sedimentary formations), ascended along permeable fault zones, and were emplaced as veins into dilatent areas in and adjacent to the fault zones.

Two-dimensional orthonormal trend surfaces for prospecting

NASA Astrophysics Data System (ADS)

Sarma, D. D.; Selvaraj, J. B.

Orthonormal polynomials have distinct advantages over conventional polynomials: the equations for evaluating trend coefficients are not ill-conditioned and the convergence power of this method is greater compared to the least-squares approximation and therefore the approach by orthonormal functions provides a powerful alternative to the least-squares method. In this paper, orthonormal polynomials in two dimensions are obtained using the Gram-Schmidt method for a polynomial series of the type: Z = 1 + x + y + x2 + xy + y2 + … + yn, where x and y are the locational coordinates and Z is the value of the variable under consideration. Trend-surface analysis, which has wide applications in prospecting, has been carried out using the orthonormal polynomial approach for two sample sets of data from India concerned with gold accumulation from the Kolar Gold Field, and gravity data. A comparison of the orthonormal polynomial trend surfaces with those obtained by the classical least-squares method has been made for the two data sets. In both the situations, the orthonormal polynomial surfaces gave an improved fit to the data. A flowchart and a FORTRAN-IV computer program for deriving orthonormal polynomials of any order and for using them to fit trend surfaces is included. The program has provision for logarithmic transformation of the Z variable. If log-transformation is performed the predicted Z values are reconverted to the original units and the trend-surface map generated for use. The illustration of gold assay data related to the Champion lode system of Kolar Gold Fields, for which a 9th-degree orthonormal trend surface was fit, could be used for further prospecting the area.

Reconnaissance geology, mineral occurrences, and geochemical anomalies of the Yentna district, Alaska

USGS Publications Warehouse

Clark, Allen L.; Hawley, C.C.

1968-01-01

The Yentna district, in south-central Alaska, is underlain by slightly metamorphosed Mesozoic sedimentary rocks, and by sandstones, conglomerates and coaly minerals of the Tertiary Kenai Formation. The bedrock is locally covered by extensive surficial deposits of Quaternary and Recent (Holocene) age. The Mesozoic strata are cut by a quartz monzonite batholith in the Tokositna Mountains and by alaskitic dikes and plugs in the Peters and Dutch Hills. A silica-carbonate dike, which formed by alteration of a mafic or ultramafic dike, was noted in the Peters Hills. The major ore deposits are gold placer deposits of several types, including stream and bench deposits of Recent (Holocene) age, glacial-fluviatile deposits of Quaternary age, and conglomerates of Tertiary age. Quartz-rich conglomerates and breccias have also been productive and are interesting and controversial genetically. The present study indicates that they are closely related to shear zones containing quartz veins and highly altered rocks; previously the origin of the associated altered rocks had been ascribed to deep weathering. The report also contains descriptions of a few gold lode prospects and of geochemically anomalous areas such as those at Bunco Creek and near Mount Goldie.

Radioactivity at the Copper Creek copper lode prospect, Eagle district, east-central Alaska

USGS Publications Warehouse

Wedow, Helmuth; Tolbert, Gene Edward

1952-01-01

Investigation of radioactivity anomalies at the Copper Creek copper lode prospect, Eagle district, east-central Alaska, during 1949 disclosed that the radioactivity is associated with copper mineralization in highly metamorphosed sedimentary rocks. These rocks are a roof pendant in the Mesozoic "Charley River" batholith. The radioactivity is probably all due to uranium associated with bornite and malachite.

Phanerozoic continental growth and gold metallogeny of Asia

USGS Publications Warehouse

Goldfarb, Richard J.; Taylor, Ryan D.; Collins, Gregory S.; Goryachev, Nicolay A.; Orlandini, Omero Felipe

2014-01-01

The Asian continent formed during the past 800 m.y. during late Neoproterozoic through Jurassic closure of the Tethyan ocean basins, followed by late Mesozoic circum-Pacific and Cenozoic Himalayan orogenies. The oldest gold deposits in Asia reflect accretionary events along the margins of the Siberia, Kazakhstan, North China, Tarim–Karakum, South China, and Indochina Precambrian blocks while they were isolated within the Paleotethys and surrounding Panthalassa Oceans. Orogenic gold deposits are associated with large-scale, terrane-bounding fault systems and broad areas of deformation that existed along many of the active margins of the Precambrian blocks. Deposits typically formed during regional transpressional to transtensional events immediately after to as much as 100 m.y. subsequent to the onset of accretion or collision. Major orogenic gold provinces associated with this growth of the Asian continental mass include: (1) the ca. 750 Ma Yenisei Ridge, ca. 500 Ma East Sayan, and ca. 450–350 Ma Patom provinces along the southern margins of the Siberia craton; (2) the 450 Ma Charsk belt of north-central Kazakhstan; (3) the 310–280 Ma Kalba belt of NE Kazakhstan, extending into adjacent NW Xinjiang, along the Siberia–Kazakhstan suture; (4) the ca. 300–280 Ma deposits within the Central Asian southern and middle Tien Shan (e.g., Kumtor, Zarmitan, Muruntau), marking the closure of the Turkestan Ocean between Kazakhstan and the Tarim–Karakum block; (5) the ca. 190–125 Ma Transbaikal deposits along the site of Permian to Late Jurassic diachronous closure of the Mongol–Okhotsk Ocean between Siberia and Mongolia/North China; (6) the probable Late Silurian–Early Devonian Jiagnan belt formed along the margin of Gondwana at the site of collision between the Yangtze and Cathaysia blocks; (7) Triassic deposits of the Paleozoic Qilian Shan and West Qinling orogens along the SW margin of the North China block developed during collision of South China; and (8) Jurassic(?) ores on the margins of the Subumusu block in Myanmar and Malaysia. Circum-Pacific tectonism led to major orogenic gold province formation along the length of the eastern side of Asia between ca. 135 and 120 Ma, although such deposits are slightly older in South Korea and slightly younger in the Amur region of the Russian Southeast. Deformation related to collision of the Kolyma–Omolon microcontinent with the Pacific margin of the Siberia craton led to formation of 136–125 Ma ores of the Yana–Kolyma belt (Natalka, Sarylakh) and 125–119 Ma ores of the South Verkhoyansk synclinorium (Nezhdaninskoe). Giant ca. 125 Ma gold provinces developed in the Late Archean uplifted basement of the decratonized North China block, within its NE edge and into adjacent North Korea, in the Jiaodong Peninsula, and in the Qinling Mountains. The oldest gold-bearing magmatic–hydrothermal deposits of Asia include the ca. 485 Ma Duobaoshan porphyry within a part of the Tuva–Mongol arc, ca. 355 Ma low-sulfidation epithermal deposits (Kubaka) of the Omolon terrane accreted to eastern Russia, and porphyries (Bozshakol, Taldy Bulak) within Ordovican to Early Devonian oceanic arcs formed off the Kazakhstan microcontinent. The Late Devonian to Carboniferous was marked by widespread gold-rich porphyry development along the margins of the closing Ob–Zaisan, Junggar–Balkhash, and Turkestan basins (Amalyk, Oyu Tolgoi); most were formed in continental arcs, although the giant Oyu Tolgoi porphyry was part of a near-shore oceanic arc. Permian subduction-related deformation along the east side of the Indochina block led to ca. 300 Ma gold-bearing skarn and disseminated gold ore formation in the Truong Son fold belt of Laos, and along the west side to ca. 250 Ma gold-bearing skarns and epithermal deposits in the Loei fold belt of Laos and Thailand. In the Mesozoic Transbaikal region, extension along the basin margins subsequent to Mongol–Okhotsk closure was associated with ca. 150–125 Ma formation of important auriferous epithermal (Balei), skarn (Bystray), and porphyry (Kultuminskoe) deposits. In northeastern Russia, Early Cretaceous Pacific margin subduction and Late Cretaceous extension were associated with epithermal gold-deposit formation in the Uda–Murgal (Julietta) and Okhotsk–Chukotka (Dukat, Kupol) volcanic belts, respectively. In southeastern Russia, latest Cretaceous to Oligocene extension correlates with other low-sulfidation epithermal ores that formed in the East Sikhote–Alin volcanic belt. Other extensional events, likely related to changing plate dynamics along the Pacific margin of Asia, relate to epithermal–skarn–porphyry districts that formed at ca. 125–85 Ma in northeastmost China and ca. 105–90 Ma in the Coast Volcanic belt of SE China. The onset of strike slip along a part of the southeastern Pacific margin appears to correlate with the giant 148–135 Ma gold-rich porphyry–skarn province of the lower and middle Yangtze River. It is still controversial as to whether true Carlin-like gold deposits exist in Asia. Those deposits that most closely resemble the Nevada (USA) ores are those in the Permo-Triassic Youjiang basin of SW China and NE Vietnam, and are probably Late Triassic in age, although this is not certain. Other Carlin-like deposits have been suggested to exist in the Sepon basin of Laos and in the Mongol–Okhotsk region (Kuranakh) of Transbaikal.

Constitutive equations of a tensorial model for strain-induced damage of metals based on three invariants

NASA Astrophysics Data System (ADS)

Tutyshkin, Nikolai D.; Lofink, Paul; Müller, Wolfgang H.; Wille, Ralf; Stahn, Oliver

2017-01-01

On the basis of the physical concepts of void formation, nucleation, and growth, generalized constitutive equations are formulated for a tensorial model of plastic damage in metals based on three invariants. The multiplicative decomposition of the metric transformation tensor and a thermodynamically consistent formulation of constitutive relations leads to a symmetric second-order damage tensor with a clear physical meaning. Its first invariant determines the damage related to plastic dilatation of the material due to growth of the voids. The second invariant of the deviatoric damage tensor is related to the change in void shape. The third invariant of the deviatoric tensor describes the impact of the stress state on damage (Lode angle), including the effect of rotating the principal axes of the stress tensor (Lode angle change). The introduction of three measures with related physical meaning allows for the description of kinetic processes of strain-induced damage with an equivalent parameter in a three-dimensional vector space, including the critical condition of ductile failure. Calculations were performed by using experimentally determined material functions for plastic dilatation and deviatoric strain at the mesoscale, as well as three-dimensional graphs for plastic damage of steel DC01. The constitutive parameter was determined from tests in tension, compression, and shear by using scanning electron microscopy, which allowed to vary the Lode angle over the full range of its values [InlineEquation not available: see fulltext.]. In order to construct the three-dimensional plastic damage curve for a range of triaxiality parameters -1 ≤ ST ≤ 1 and of Lode angles [InlineEquation not available: see fulltext.], we used our own, as well as systematized published experimental data. A comparison of calculations shows a significant effect of the third invariant (Lode angle) on equivalent damage. The measure of plastic damage, based on three invariants, can be useful for assessing the quality of metal mesostructure produced during metal forming processes. In many processes of metal sheet forming the material experiences, a non-proportional loading accompanied by rotating the principal axes of the stress tensor and a corresponding change of Lode angle.

Mineral potential tracts for orogenic, Carlin-like, and epithermal gold deposits in the Islamic Republic of Mauritania, (phase V, deliverable 68): Chapter H1 in Second projet de renforcement institutionnel du secteur minier de la République Islamique de Mauritanie (PRISM-II)

USGS Publications Warehouse

Goldfarb, Richard J.; Marsh, Erin; Horton, John D.

2012-01-01

This report contains the USGS results of the PRISM-II Mauritania Minerals Project and is presented in cooperation with the Ministry of Petroleum, Energy, and Mines of the Islamic Republic of Mauritania. The Report is composed of separate chapters consisting of multidisciplinary interpretive reports with accompanying plates on the geology, structure, geochronology, geophysics, hydrogeology, geochemistry, remote sensing (Landsat TM and ASTER), and SRTM and ASTER digital elevation models of Mauritania. The syntheses of these multidisciplinary data formed the basis for additional chapters containing interpretive reports on 12 different commodities and deposit types known to occur in Mauritania, accompanied by countrywide mineral resource potential maps of each commodity/deposit type. The commodities and deposit types represented include: (1) Ni, Cu, PGE, and Cr deposits hosted in ultramafic rocks; (2) orogenic, Carlin-like, and epithermal gold deposits; (3) polymetallic Pb-Zn-Cu vein deposits; (4) sediment-hosted Pb-Zn-Ag deposits of the SEDEX and Mississippi Valley-type; (5) sediment-hosted copper deposits; ( 6) volcanogenic massive sulfide deposits; (7) iron oxide copper-gold deposits; (8) uranium deposits; (9) Algoma-, Superior-, and oolitic-type iron deposits; (10) shoreline Ti-Zr placer deposits; (11) incompatible element deposits hosted in pegmatites, alkaline rocks, and carbonatites, and; (12) industrial mineral deposits. Additional chapters include the Mauritanian National Mineral Deposits Database are accompanied by an explanatory text and the Mauritania Minerals Project GIS that contains all of the interpretive layers created by USGS scientists. Raw data not in the public domain may be obtained from the Ministry of Petroleum, Energy, and Mines in Nouakchott, Mauritania.

The tectonic setting and evolution of the 2.7 Ga Kalgoorlie-Kurnalpi Rift, a world-class Archean gold province

NASA Astrophysics Data System (ADS)

Witt, Walter K.; Cassidy, Kevin F.; Lu, Yong-Jun; Hagemann, Steffen G.

2018-01-01

The Yilgarn Craton results from three major mantle input events (at ca 3.0-2.9, 2.8 and 2.7 Ga) that have interacted with > 3.0 Ga continental crust. Zircon geochronology and Sm-Nd isotopic data subdivide the craton into an older Yilgarn proto-craton and the younger, more primitive Eastern Goldfields Superterrane (EGST). Formation of the Kalgoorlie-Kurnalpi Rift (KKR) within the EGST was associated with the 2.7 Ga event, which exploited weakened crust at the eastern margin of the Yilgarn proto-craton where thick sequences of komatiite and basalt were erupted between ca 2710 and 2690 Ma in the Kalgoorlie Terrane. Calc-alkaline volcanism in the Kurnalpi Terrane began at ca 2730 Ma and continued to ca 2690 Ma, overlapping rifting and plume-related volcanism in the Kalgoorlie Terrane. Deposition of siliciclastic sedimentary rocks within basins at ca 2660 resulted from an intra-orogenic extensional event and coincided with the transition from High-Ca to Low-Ca granite magmatism and peak emplacement of intrusions with a metasomatised mantle source component. Most aspects of the KKR are satisfied by broadly coincident plume-related magmatism in the Kalgoorlie Terrane and westward subduction to the east of the Burtville Terrane. Geochemical characteristics of 2730-2700 Ma calc-alkaline volcanism and 2685-2630 Ma low-SiO2 and alkali-rich intrusions support models for a continental margin subduction zone setting. World-class gold deposits formed in reactivated margins of the KKR, which became flux zones for mantle-derived magmas, hydrothermal fluids and heat during 2675-2620 Ma orogenesis. The orogenic gold mineralisation can be subdivided into proximal intrusion-related and distal-source deposits.

Tectonics and distribution of gold deposits in China - An overview

USGS Publications Warehouse

Zhou, T.; Goldfarb, R.J.; Phillips, G.N.

2002-01-01

Gold exploration in China has expanded rapidly during the last two decades since a modern approach to economic development has become a national priority. China currently produces 180 tonnes (t) of gold annually, which is still significantly less than South Africa, USA, and Australia. However, China is now recognized as possessing significant gold resources in a wide range of mineral deposit types. Present estimates of gold resources in China exceed 4,500 t, which comprise 60% in gold-only deposits, more than 25% in base metal-rich skarn, porphyry, and vein deposits, and more than 10% in placer accumulations. The major gold provinces in China formed during the main episodes of Phanerozoic tectonism. Such tectonism involved interaction of China's three major Precambrian cratons, North China, Tarim, and Yangtze (or South China when combined with Cathysia block), with the Angara (or Siberian), Kazakhstan-Kyrgyzstan, and Indian cratons. Resulting collisions included deformation of accreted oceanic sequences between the cratonic blocks. The most important ore-forming orogenies were (1) the late Paleozoic Variscan (405-270 Ma), which led to amalgamation of the Angara, North China and Yangtze cratons, (2) the Indosinian (270-208 Ma), which led to the collision of North China and South China cratons, (3) the Yanshanian (208-90 Ma), which was largely influenced by the subduction of the Izanagi-Pacific plates beneath eastern China, and (4) the Himalayan (<90 Ma) indentation of the Indian continent into Eurasia. No important Precambrian gold systems are recognized in China, mainly because of reworking of exposed Precambrian rocks by these younger orogenies, but there are a few Caledonian (600-405 Ma) gold-bearing system in northern Xinjiang. Most of China's orogenic, epithermal, and Carlinlike gold deposits are in the reworkerd margins of major cratonic blocks and in metasedimentary rock-dominated fold belts adjacent to these margins. Accordingly, the major gold provinces are present along the northern, southeastern and southern margins of the North China craton, along the southwestern and northwestern margins of the Yangtze craton, in the Tianshan and Altayshan orogenic belts in northern Xinjiang, and throughout the southeastern China fold belt. Gold-placer deposits derived from these primary deposits are concentrated in the northernmost part of northeastern China and along the northerwestern margin of the Yangtze craton. The major provinces with significant gold in porphyry-related copper systems and base metal skarns are present in the Yangtze River area along the northeastern and southeastern margin of the Yangtze craton, in the fold belt in southwestern China, and scattered through northern China. Three-quarters of the Chinese gold-only deposits occur within the North China craton margins. Half are located in the uplifted Precambrian metamorphie rocks and most of the remainder are hosted in the Phanerozoic granitoids that intruded the reworked Precambrian terranes. The abundance of granite-hosted gold contrasts the North China craton with other Precambrian cratons, such as those in Western Australia, central Canada, and Zimbabwe, where gold is mainly hosted in the Archean greenstone belts. This difference may be explained by the multiple episodes of Phanerozoic tectonism along the North China craton margins resulting from the collision of the Angara, North China, and South China cratons, and from subduction of the Izanagi-Pacific oceanic plates underneath the eastern China continent.

Multiple sulfur isotopes monitor fluid evolution of an Archean orogenic gold deposit

NASA Astrophysics Data System (ADS)

LaFlamme, Crystal; Sugiono, Dennis; Thébaud, Nicolas; Caruso, Stefano; Fiorentini, Marco; Selvaraja, Vikraman; Jeon, Heejin; Voute, François; Martin, Laure

2018-02-01

The evolution of a gold-bearing hydrothermal fluid from its source to the locus of gold deposition is complex as it experiences rapid changes in thermochemical conditions during ascent through the crust. Although it is well established that orogenic gold deposits are generated during time periods of abundant crustal growth and/or reworking, the source of fluid and the thermochemical processes that control gold precipitation remain poorly understood. In situ analyses of multiple sulfur isotopes offer a new window into the relationship between source reservoirs of Au-bearing fluids and the thermochemical processes that occur along their pathway to the final site of mineralisation. Whereas δ34S is able to track changes in the evolution of the thermodynamic conditions of ore-forming fluids, Δ33S is virtually indelible and can uniquely fingerprint an Archean sedimentary reservoir that has undergone mass independent fractionation of sulfur (MIF-S). We combine these two tracers (δ34S and Δ33S) to characterise a gold-bearing laminated quartz breccia ore zone and its sulfide-bearing alteration halo in the (+6 Moz Au) structurally-controlled Archean Waroonga deposit located in the Eastern Goldfields Superterrane of the Yilgarn Craton, Western Australia. Over 250 analyses of gold-associated sulfides yield a δ34S shift from what is interpreted as an early pre-mineralisation phase, with chalcopyrite-pyrrhotite (δ34S = +0.7‰ to +2.9‰) and arsenopyrite cores (δ34S = ∼-0.5‰), to a syn-mineralisation stage, reflected in Au-bearing arsenopyrite rims (δ34S = -7.6‰ to +1.5‰). This shift coincides with an unchanging Δ33S value (Δ33S = +0.3‰), both temporally throughout the Au-hosting hydrothermal sulfide paragenesis and spatially across the Au ore zone. These results indicate that sulfur is at least partially recycled from MIF-S-bearing Archean sediments. Further, the invariant nature of the observed MIF-S signature demonstrates that sulfur is derived from a homogeneous MIF-S-bearing fluid reservoir at depth, rather than being locally sourced at the site of Au precipitation. Finally, by constraining the MIF-S-bearing sulfur source to a fixed reservoir, we are able to display the thermochemical evolution of the ore fluid in δ34S space and capture the abrupt change in oxidation state that causes Au precipitation. Our results highlight the importance of constraining multiple sulfur isotopes in space and time in order to elucidate the source and evolution of any given Au-bearing fluid.

Antimony ore in the Fairbanks district, Alaska

USGS Publications Warehouse

Killeen, Pemberton Lewis; Mertie, John B.

1951-01-01

Antimony-bearing ores in the Fairbanks district, Alaska, are found principally in two areas, the extremities of which are at points 10 miles west and 23 miles northeast of Fairbanks; and one of two minor areas lies along this same trend 30 miles farther to the northeast. These areas are probably only local manifestations of mineralization that affected a much broader area and formed antimony-bearing deposits in neighboring districts, the closest of which is 50 miles away. The ores were exposed largely as a result of lode gold mining, but at two periods in the past, high prices for antimony ore warranted an independent production and about 2500 tons of stibnite ore was shipped. The sulfide deposits occupy the same fractures along which a gold-quartz mineralization of greater economic importance occurred; and both are probably genetically related to igneous rocks which intrude the schistose country rock. The sulfide is in part contemporaneous with some late-stage quartz in which it occurs as disseminated crystals; and in part the latest filling in the mineralized zones where it forms kidney-shaped masses of essentially solid sulfide. One extremely long mass must have contained nearly 100 tons of ore, but the average of the larger kidneys is closer to several tons. Much of the ore is stibnite, with quartz as a minor impurity, and assays show the tenor to vary from 40 to 65 percent antimony. Sulphantimonites are less abundant but likewise occur as disseminated crystals and as kidney-shaped bodies. Antimony oxides appear on the weathered surface and along fractures within the sulfide ore. Deposits containing either stibnite or sulphantimonite are known at more than 50 localities, but only eighteen have produced ore and the bulk of this came from the mines. The geology of the deposit, and the nature, extent, and period of the workings are covered in the detailed descriptions of individual occurrences. Several geologic and economic factors, which greatly affect prospecting and mining for stibnite ore in the area, are outlined. The principal available ore and reserves are considered to be ores earlier mined but never shipped, ore minable from near-surface deposits, and ores recoverable as a by-product of future gold mining. The outlook for stibnite production in the district is very uncertain. Apparently the greater portion of stibnite ore has already been recovered and present operations will strip the two principal areas of the district. This conclusion is based on the scanty discoveries since the last war and the fact that the areas are so pock-marked with prospects that there is little likelihood that any other large near-surface bodies remain to be discovered. Future prospecting would essentially be limited to attempts to seek the continuation of lodes previously having high yields of stibnite.

Geology and geochemistry of the shear-hosted Julie gold deposit, NW Ghana

NASA Astrophysics Data System (ADS)

Amponsah, Prince Ofori; Salvi, Stefano; Béziat, Didier; Siebenaller, Luc; Baratoux, Lenka; Jessell, Mark W.

2015-12-01

The Leo Man Craton in West Africa is host to numerous economic gold deposits. If some regions, such as the SW of Ghana, are well known for world-class mineralizations and have been extensively studied, gold occurrences elsewhere in the craton have been discovered only in the last half a century or so, and very little is known about them. The Julie gold deposit, located in the Paleoproterozoic Birimian terrane of NW Ghana, is one such case. This deposit is hosted in a series of granitoid intrusives of TTG composition, and consists of a network of deformed, boudinaged quartz lodes (A-type veins) contained within an early DJ1 E-W trending shear zone with dextral characteristics. A conjugate set of veins (C-type) perpendicular to the A-type veins contains low grade mineralization. The main ore zone defines a lenticular corridor about 20-50 m in width and about 3.5 km along strike, trending E-W and dipping between 30 and 60°N. The corridor is strongly altered, by an assemblage of sericite + quartz + ankerite + calcite + tourmaline + pyrite. This is surrounded by a second alteration assemblage, consisting of albite + sericite + calcite + chlorite + pyrite + rutile, which marks a lateral alteration that fades into the unaltered rock. Mass balance calculations show that during alteration overall mass was conserved and elemental transfer is generally consistent with sulfidation, sericitization and carbonatization of the host TTG. Gold is closely associated with pyrite, which occurs as disseminated grains in the veins and in the host rock, within the mineralized corridor. SEM imagery and LA-ICP-MS analyses of pyrites indicate that in A-type veins gold is associated with bismuth, tellurium, lead and silver, while in C-type veins it is mostly associated with silver. Pyrites in A-type veins contain gold as inclusions and as free gold on its edges and fractures, while pyrites from C-type veins contains mostly free gold. Primary and pseudosecondary fluid inclusions from both type veins indicate circulation in the system of an aqueous-carbonic fluid of low to moderate salinity, which entered the immiscibility PT region of the H2O-CO2-NaCl system, at about 220 °C and <1 kbar.

Quartz-pebble-conglomerate gold deposits: Chapter P in Mineral deposit models for resource assessment

USGS Publications Warehouse

Taylor, Ryan D.; Anderson, Eric D.

2018-05-17

Quartz-pebble-conglomerate gold deposits represent the largest repository of gold on Earth, largely due to the deposits of the Witwatersrand Basin, which account for nearly 40 percent of the total gold produced throughout Earth’s history. This deposit type has had a controversial history in regards to genetic models. However, most researchers conclude that they are paleoplacer deposits that have been modified by metamorphism and hydrothermal fluid flow subsequent to initial sedimentation.The deposits are found exclusively within fault-bounded depositional basins. The periphery of these basins commonly consists of granite-greenstone terranes, classic hosts for lode gold that source the detrital material infilling the basin. The gold reefs are typically located along unconformities or, less commonly, at the top of sedimentary beds. Large quartz pebbles and heavy-mineral concentrates are found associated with the gold. Deposits that formed prior to the Great Oxidation Event (circa 2.4 giga-annum [Ga]) contain pyrite, whereas younger deposits contain iron oxides. Uranium minerals and hydrocarbons are also notable features of some deposits.Much of the gold in these types of deposits forms crystalline features that are the product of local remobilization. However, some gold grains preserve textures that are undoubtedly of detrital origin. Other heavy minerals, such as pyrite, contain growth banding that is truncated along broken margins, which indicates that they were transported into place as opposed to forming by in situ growth in a hydrothermal setting.The ore tailings associated with these deposits commonly contain uranium-rich minerals and sulfides. Oxidation of the sulfides releases sulfuric acid and mobilizes various metals into the environment. The neutralizing potential of the tailings is minimal, since carbonate minerals are rare. The continuity of the tabular ore bodies, such as those of the Witwatersrand Basin, has allowed these mines to be the deepest in the world. The extreme depths create engineering complications and safety issues for the miners, such as rock bursts as a result of pressure release.The richness of these deposits makes them a desirable exploration target. However, the likelihood of future discoveries is minimal. Small deposits found in the United States include those found at Nemo in the Black Hills of South Dakota and Deep Lake in the Sierra Madre of Wyoming.

Magmatism and Epithermal Gold-Silver Deposits of the Southern Ancestral Cascade Arc, Western Nevada and Eastern California

USGS Publications Warehouse

John, David A.; du Bray, Edward A.; Henry, Christopher D.; Vikre, Peter

2015-01-01

Many epithermal gold-silver deposits are temporally and spatially associated with late Oligocene to Pliocene magmatism of the southern ancestral Cascade arc in western Nevada and eastern California. These deposits, which include both quartz-adularia (low- and intermediate-sulfidation; Comstock Lode, Tonopah, Bodie) and quartz-alunite (high-sulfidation; Goldfield, Paradise Peak) types, were major producers of gold and silver. Ancestral Cascade arc magmatism preceded that of the modern High Cascades arc and reflects subduction of the Farallon plate beneath North America. Ancestral arc magmatism began about 45 Ma, continued until about 3 Ma, and extended from near the Canada-United States border in Washington southward to about 250 km southeast of Reno, Nevada. The ancestral arc was split into northern and southern segments across an inferred tear in the subducting slab between Mount Shasta and Lassen Peak in northern California. The southern segment extends between 42°N in northern California and 37°N in western Nevada and was active from about 30 to 3 Ma. It is bounded on the east by the northeast edge of the Walker Lane. Ancestral arc volcanism represents an abrupt change in composition and style of magmatism relative to that in central Nevada. Large volume, caldera-forming, silicic ignimbrites associated with the 37 to 19 Ma ignimbrite flareup are dominant in central Nevada, whereas volcanic centers of the ancestral arc in western Nevada consist of andesitic stratovolcanoes and dacitic to rhyolitic lava domes that mostly formed between 25 and 4 Ma. Both ancestral arc and ignimbrite flareup magmatism resulted from rollback of the shallowly dipping slab that began about 45 Ma in northeast Nevada and migrated south-southwest with time. Most southern segment ancestral arc rocks have oxidized, high potassium, calc-alkaline compositions with silica contents ranging continuously from about 55 to 77 wt%. Most lavas are porphyritic and contain coarse plagioclase ± hornblende, biotite, and pyroxene phenocrysts. Seven epithermal gold-silver deposits with >1 Moz gold production, several large elemental sulfur deposits, and many large areas (10s to >100 km2) of hydrothermally altered rocks are present in the southern ancestral arc, especially south of latitude 40°N. These deposits are principally hosted by intermediate to silicic lava dome complexes; only a few deposits are associated with mafic- to intermediate-composition stratovolcanoes. Large deposits are most abundant and well developed in volcanic fields whose evolution spanned millions of years. Most deposits are hundreds of thousands to several million years younger than their host rocks, although some quartz-alunite deposits are essentially coeval with their host rocks. Variable composition and thickness of crustal basement is the primary control on mineralization along the length of the southern ancestral arc; most deposits and large alteration zones are localized in basement rock terranes with a strong continental affinity, either along the edge of the North American craton (Goldfield, Tonopah) or in an accreted terrane with continental affinities (Walker Lake terrane; Aurora, Bodie, Comstock Lode, Paradise Peak). Epithermal deposits and quartz-alunite alteration zones are scarce to absent in the northern part of the ancestral arc above an accreted island arc (Black Rock terrane) or unknown basement rocks (Modoc Plateau). Walker Lane structures and areas that underwent large magnitude extension during the Late Cenozoic (areas with Oligocene-early Miocene volcanic rocks dipping >40°) do not provide regional control on mineralization. Instead, these features may have served as local-scale conduits for mineralizing fluids.

Mineralisation footprints and regional timing of the world-class Siguiri orogenic gold district (Guinea, West Africa)

NASA Astrophysics Data System (ADS)

Lebrun, Erwann; Thébaud, Nicolas; Miller, John; Roberts, Malcolm; Evans, Noreen

2017-04-01

Siguiri is a world-class orogenic gold district hosted in the weakly metamorphosed Upper Birimian to Lower Tarkwa Group sedimentary rocks of the Siguiri Basin (Guinea). The district is characterised by a protracted deformation history associated with four main deformation events: D1S is a N-S compression; D2S is an E-W compression progressively evolving into an early-D3S transpression and then into a late-D3S NNW-SSE transtension and D4S is a NE-SW compression. Field observations, petrography and geochemistry at three key deposits of the Siguiri district (Bidini, Sintroko PB1 and Kosise) suggest a polyphase hydrothermal history that can be subdivided into four hydrothermal events. The first hydrothermal event was associated with the development of barren bedding-parallel and en-echelon V2S quartz-dominated-(pyrite) veins. The second hydrothermal event is characterised by the development of V3A pyrite-ankerite veins late during D3S. Laser ablation-ICP-MS data show that this vein set contains high gold contents of up to 43.3 ppm, in substitution in pyrite crystal lattice, representing a minor first gold mineralisation event. The third and most prominently developed hydrothermal event is late D3S and represents the second and principal gold mineralisation event. This mineralisation event led to two distinct mineralisation textures. The first texture is best exposed in the Kosise deposit and is characterised by gold-bearing quartz-ankerite-arsenopyrite conjugate V3B veins. Although the bulk of the gold is hosted in native gold grains in V3B veins, LA-ICP-MS analyses show that gold also substitutes in the arsenopyrite crystal lattice (up to 55.5 ppm). The second mineralisation texture is best expressed in the Sanu Tinti deposit and consists of disseminated barren pyrite hosted in a polymict conglomerate. The second and third hydrothermal events are both structurally controlled by a series of early-D3S N-S, NE-SW, WNW-ESE and E-W sub-vertical incipient structures expressed as fracture zones of higher V3S vein density. A composite geochemical cross section across fracture zones from the Kosise deposit indicates that gold mineralisation in the Siguiri district is associated with enrichments in Ag, Au, As, Bi, Co, Mo, (Sb), S, Te and W relative to background. Geochemical variations associated with the ore shoots in the Siguiri district are consistent with petrographic observations and highlight an albite-carbonate-sulphide-sericite alteration. The fourth and last hydrothermal event is associated with the development of a late penetrative S4S cleavage during D4S deformation, which overprints all pre-existing hydrothermal features and is associated with the deposition of free gold, chalcopyrite and galena along fractures in V3A pyrite and V3B pyrite and arsenopyrite. Mineralogical and geochemical footprints as well as timing of the gold-mineralising events in the Siguiri district, when compared with other deposits of the West African Craton, highlight the synchronicity of gold mineralisation in Siguiri (syn-D3S and syn-D4S events) with other similar events in this part of the craton, such as the early Au-Sb-Bi-(Te-W) mineralisation at the Morila deposit in Southeast Mali. Our results support the hypothesis that late Eburnean-age gold mineralisation in the Siguiri district and in the West African Craton as a whole was polyphase.

Brittle deformation along the Gulf of Alaska margin in response to Paleocene-Eocene triple junction migration: in Sisson

USGS Publications Warehouse

Haeussler, Peter J.; Bradley, Dwight C.; Goldfarb, Richard J.

2003-01-01

A spreading center was subducted diachronously along a 2200 km segment of what is now the Gulf of Alaska margin between 61 and 50 Ma, and left in its wake near-trench intrusions and high-T, low-P metamorphic rocks. Gold-quartz veins and dikes, linked to ridge subduction by geochronological and relative timing evidence, provide a record of brittle deformation during and after passage of the ridge. The gold-quartz veins are typically hosted by faults, and their regional extent indicates there was widespread deformation of the forearc above the slab window at the time of ridge subduction. Considerable variability in the strain pattern was associated with the slab window and the trailing plate. A diffuse network of dextral, sinistral, and normal faults hosted small lode-gold deposits (<50,000 oz) in south-central Alaska, whereas crustal-scale dextral faults in southeastern Alaska are spatially associated with large gold deposits (up to 800,000 oz).We interpret the gold-quartz veins as having formed above an eastward-migrating slab window, where the forearc crust responded to the diminishing influence of the forward subducting plate, the increasing influence of the trailing plate, and the thermal pulse and decreased basal friction from the slab window. In addition, extensional deformation of the forearc resulted from the diverging motions of the two oceanic plates at the margins of the slab window. Factors that complicate interpretations of fault kinematics and near-trench dike orientations include a change in plate motions at ca. 52 Ma, northward translation of the accretionary complex, oroclinal bending of the south-central Alaska margin, and subduction of transform segments. We find the pattern of syn-ridge subduction faulting in southern Alaska is remarkably similar to brittle faults near the Chile triple junction and to earthquake focal mechanisms in the Woodlark basin - the two modern sites of ridge subduction. Therefore, extensional and strike-slip deformation above slab windows may be a common occurrence.

Gold-bearing skarns

USGS Publications Warehouse

Theodore, Ted G.; Orris, Greta J.; Hammerstrom, Jane M.; Bliss, James D.

1991-01-01

In recent years, a significant proportion of the mining industry's interest has been centered on discovery of gold deposits; this includes discovery of additional deposits where gold occurs in skarn, such as at Fortitude, Nevada, and at Red Dome, Australia. Under the classification of Au-bearing skarns, we have modeled these and similar gold-rich deposits that have a gold grade of at least 1 g/t and exhibit distinctive skarn mineralogy. Two subtypes, Au-skarns and byproduct Au-skarns, can be recognized on the basis of gold, silver, and base-metal grades, although many other geological factors apparently are still undistinguishable largely because of a lack of detailed studies of the Au-skarns. Median grades and tonnage for 40 Au-skarn deposits are 8.6 g/t Au, 5.0 g/t Ag, and 213,000 t. Median grades and tonnage for 50 byproduct and Au-skarn deposits are 3.7 g/t Au, 37 g/t Ag, and 330,000 t. Gold-bearing skarns are generally calcic exoskarns associated with intense retrograde hydrosilicate alteration. These skarns may contain economic amounts of numerous other commodities (Cu, Fe, Pb, Zn, As, Bi, W, Sb, Co, Cd, and S) as well as gold and silver. Most Au-bearing skarns are found in Paleozoic and Cenozoic orogenic-belt and island-arc settings and are associated with felsic to intermediate intrusive rocks of Paleozoic to Tertiary age. Native gold, electru, pyrite, pyrrhotite, chalcopyrite, arsenopyrite, sphalerite, galena, bismuth minerals, and magnetite or hematite are the most common opaque minerals. Gangue minerals typically include garnet (andradite-grossular), pyroxene (diopside-hedenbergite), wollastonite, chlorite, epidote, quartz, actinolite-tremolite, and (or) calcite.

A Laurentian margin back-arc: the Ordovician Wedowee-Emuckfaw-Dahlonega basin

USGS Publications Warehouse

Barineau, Clinton I.; Tull, James F.; Holm-Denoma, Christopher S.

2015-01-01

Independent researchers working in the Talladega belt, Ashland-Wedowee-Emuckfaw belt, and Opelika Complex of Alabama, as well as the Dahlonega gold belt and western Inner Piedmont of Alabama, Georgia, and the Carolinas, have mapped stratigraphic sequences unique to each region. Although historically considered distinct terranes of disparate origin, a synthesis of data suggests that each includes lithologic units that formed in an Ordovician back-arc basin (Wedowee-Emuckfaw-Dahlonega basin—WEDB). Rocks in these terranes include varying proportions of metamorphosed mafic and bimodal volcanic rock suites interlayered with deep-water metasedimentary rock sequences. Metavolcanic rocks yield ages that are Early–Middle Ordovician (480–460 Ma) and interlayered metasedimentary units are populated with both Grenville and Early–Middle Ordovician detrital zircons. Metamafic rocks display geochemical trends ranging from mid-oceanic-ridge basalt to arc affinity, similar to modern back-arc basalts. The collective data set limits formation of the WEDB to a suprasubduction system built on and adjacent to upper Neoproterozoic–lower Paleozoic rocks of the passive Laurentian margin at the trailing edge of Iapetus, specifically in a continental margin back-arc setting. Overwhelmingly, the geologic history of the southern Appalachians, including rocks of the WEDB described here, indicates that the Ordovician Taconic orogeny in the southern Appalachians developed in an accretionary orogenic setting instead of the traditional collisional orogenic setting attributed to subduction of the Laurentian margin beneath an exotic or peri-Laurentian arc. Well-studied Cenozoic accretionary orogens provide excellent analogs for Taconic orogenesis, and an accretionary orogenic model for the southern Appalachian Taconic orogeny can account for aspects of Ordovician tectonics not easily explained through collisional orogenesis.

Geochemical modeling of orogenic gold deposit using PCANN hybrid method in the Alut, Kurdistan province, Iran

NASA Astrophysics Data System (ADS)

Mohammadzadeh, Mohammadjafar; Nasseri, Aynur

2018-03-01

In this paper stream sediments based geochemical exploration program with the aim of delineating potentially promising areas by a comprehensive stepwise optimization approach from univariate statistics, PCA, ANN, and fusion method PCANN were under taken for an orogenic gold deposit located in the Alut, Kurdistan province, NW of Iran. At first the data were preprocessed and then PCA were applied to determine the maximum variability directions of elements in the area. Subsequently the artificial neural network (ANN) was used for quick estimation of elemental concentration, as well as discriminating anomalous populations and intelligent determination of internal structure among the data. However, both the methods revealed constraints for modeling. To overcome the deficiency and shortcoming of each individual method a new methodology is presented by integration of both "PCA & ANN" referred as PCANN method. For integrating purpose, the detected PCs pertinent to ore mineralization selected and intruded to neural network structure, as a result different MLPs with various algorithms and structures were produced. The resulting PCANN maps suggest that the gold mineralization and its pathfinder elements (Au, Mo, W, Bi, Sb, Cu, Pb, Ag & As) are associated with metamorphic host rocks intruded by granite bodies in the Alut area. In addition, more concealed and distinct Au anomalies with higher intensity were detected, confirming the privileges of the method in evaluating susceptibility of the area in delineating new hidden potential zones. The proposed method demonstrates simpler network architecture, easy computational implementation, faster training speed, as well as no need to consider any primary assumption about the behavior of data and their probability distribution type, with more satisfactory predicting performance for generating gold potential map of the area. Comparing the results of three methods (PCA, ANN and PCANN), representing the higher efficiency and more reliability of PCANN with lesser training time, simple structure, and correlate components while avoiding the duplicate entry of data to network. This study also suggests that in many similar cases integrated methods have capability to fix bugs more effectively and successfully in exploration programs.

Low-Impact Exploration for Gold in the Scottish Caledonides.

NASA Astrophysics Data System (ADS)

Rice, Samuel; Cuthbert, Simon; Hursthouse, Andrew; Broetto, Gabriele

2017-04-01

The Caledonian orogenic belt of the northern British Isles hosts some significant gold deposits. However, gold mineralization in the region is underexplored. Some of the most prospective areas identified by rich alluvial gold anomalies are environmentally and culturally sensitive. Traditional mineral exploration methods can have a range of negative environmental, social and economic impacts. The regional tourism economy is dependent on outdoor activities, landscape quality, wildlife and industrial heritage and has the potential to be disrupted by mineral resource developments. Low-cost, low-impact exploration strategies are therefore, key to sustainably developing the mineral resource potential. Research currently in progress in part of the Scottish Caledonides aims to develop protocols for more sustainable exploration. We are using a range of geoscience techniques to characterize the mineral system, improve exploration targeting and reduce negative impacts. To do this we targeted an area with a large preexisting dataset (e.g. stream sediment geochemistry, geomorphology, structural geology, petrology, geophysics, mine data) that can be synthesized and analyzed in a GIS. Part of the work aims to develop and test a model for gold dispersion in the surface environment that accounts for climatic and anthropogenic influences in order to locate bedrock sources. This multidisciplinary approach aims to reduce the target areas for subsequent exploration activities such as soil sampling, excavation and drilling.

Targeting of Gold Deposits in Amazonian Exploration Frontiers using Knowledge- and Data-Driven Spatial Modeling of Geophysical, Geochemical, and Geological Data

NASA Astrophysics Data System (ADS)

Magalhães, Lucíola Alves; Souza Filho, Carlos Roberto

2012-03-01

This paper reports the application of weights-of-evidence, artificial neural networks, and fuzzy logic spatial modeling techniques to generate prospectivity maps for gold mineralization in the neighborhood of the Amapari Au mine, Brazil. The study area comprises one of the last Brazilian mineral exploration frontiers. The Amapari mine is located in the Maroni-Itaicaiúnas Province, which regionally hosts important gold, iron, manganese, chromite, diamond, bauxite, kaolinite, and cassiterite deposits. The Amapari Au mine is characterized as of the orogenic gold deposit type. The highest gold grades are associated with highly deformed rocks and are concentrated in sulfide-rich veins mainly composed of pyrrhotite. The data used for the generation of gold prospectivity models include aerogeophysical and geological maps as well as the gold content of stream sediment samples. The prospectivity maps provided by these three methods showed that the Amapari mine stands out as an area of high potential for gold mineralization. The prospectivity maps also highlight new targets for gold exploration. These new targets were validated by means of detailed maps of gold geochemical anomalies in soil and by fieldwork. The identified target areas exhibit good spatial coincidence with the main soil geochemical anomalies and prospects, thus demonstrating that the delineation of exploration targets by analysis and integration of indirect datasets in a geographic information system (GIS) is consistent with direct prospecting. Considering that work of this nature has never been developed in the Amazonian region, this is an important example of the applicability and functionality of geophysical data and prospectivity analysis in regions where geologic and metallogenetic information is scarce.

Late Paleozoic tectonic evolution and concentrated mineralization in Balkhash and West Junggar, western part of the Central Asian Orogenic Belt

NASA Astrophysics Data System (ADS)

Dong, Shuwen; Chen, Xuanhua; Chen, Zhengle

2016-04-01

The Central Asia Orogenic Belt (CAOB) is an important area with significant growth of the crust and metallogeny in the Late Paleozoic. The Balkhash-Junggar tectono-metallogenic belt consists of the Balkhash, the West Junggar, and the East Junggar tectono-metallogenic belts in western part of the Central Asian Orogenic Belt (CAOB). According to the structural geological relationship, the East Junggar, the West Junggar, and the Balkhash belts are considered to be once a continuous E-W-trending tectono-metallogenic belt in Late Carboniferous. The West Junggar belt is featured with NE-trending left-lateral strike-slip faulting tectonic system (WJTS), while the left-lateral strike-slip faults are E-W-trending in the Balkhash belt. The WJTS consists of the Darabut, the Mayile, and the Baerluke faults, and the blocks among them. All these left-lateral strike-slip faults are forming due to the transition of tectonic settings from syn-collisional orogeny to post-collisional extension during the closure of the ocean (the Junggar Sea) in Late Carboniferous, with significant intrusion of batholiths and crust growth occurred in this period. These faults are truncated by the right-lateral strike-slip faults, such as the Chingiz-Junggar fault, and the Central Balkhash fault in Mesozoic. The Balkhash-Junggar tectono-metallogenic belt is important for the occurrence of many well-known super-large and large porphyry Cu-Mo deposits (such as the Kounrad, the Aktogai, the Borly, and the Baogutu deposits), large skarn Cu deposits (in the Sayak ore-filed), large rare metal deposits (such as the East Kounrad, the Zhanet, and the Akshatau deposits), and large gold deposits (such as the Hatu deposit). Zircon U-Pb ages, Re-Os isotopic dating of molybdenites, 40Ar/39Ar thermochronology of hornblendes, muscovites, biotites, and K-feldspars, and zircon and apatite fission track (FT) and (U-Th)/He dating and thermal history modeling, provide a multidisciplinary approach to constrain the whole course thermo-history of the minearl deposits from their formation in the deep to the exhumation in the surface. It reveals the arc-related granitic magmatism and the metallogeneses of skarn Cu, porphyry Cu-Mo, quartz-vein/greisen W-Mo, and orogenic Au in Late Paleozoic, the medium-temperature regional cooling in Late Paleozoic and Early Mesozoic, and the low-temperature exhumation of the deposits in Mesozoic. The timing, combined with geochemistry of granitoids, suggests a transition of tectonic environment from syn-collision and volcanic arc in Late Carboniferous to post-collision extension in Early Permian, and the concentrated mineralization of Cu, Mo, rare metals, and Au during this tectonic transition. The complete metallogenic series for the concentrated mineralization are from skarn and porphyry Cu-Mo deposits to rare metal and gold deposits. Key words: Late Paleozoic; Tectonic evolution; Concentrated mineralization; Balkhash-Junggar tectono-metallogenic belt; Central Asian Orogenic Belt

The global age distribution of granitic pegmatites

USGS Publications Warehouse

McCauley, Andrew; Bradley, Dwight C.

2014-01-01

An updated global compilation of 377 new and previously published ages indicates that granitic pegmatites range in age from Mesoarchean to Neogene and have a semi-periodic age distribution. Undivided granitic pegmatites show twelve age maxima: 2913, 2687, 2501, 1853, 1379, 1174, 988, 525, 483, 391, 319, and 72 Ma. These peaks correspond broadly with various proxy records of supercontinent assembly, including the age distributions of granites, detrital zircon grains, and passive margins. Lithium-cesium-tantalum (LCT) pegmatites have a similar age distribution to the undivided granitic pegmatites, with maxima at 2638, 1800, 962, 529, 485, 371, 309, and 274 Ma. Lithium and Ta resources in LCT pegmatites are concentrated in the Archean and Phanerozoic. While there are some Li resources from the Proterozoic, the dominantly bimodal distribution of resources is particularly evident for Ta. This distribution is similar to that of orogenic gold deposits, and has been interpreted to reflect the preservation potential of the orogenic belts where these deposits are formed. Niobium-yttrium-fluorine (NYF) pegmatites show similar age distributions to LCT pegmatites, but with a strong maximum at ca. 1000 Ma.

The Alaskan Mineral Resource Assessment Program; background information to accompany folio of geologic and mineral resource maps of the Circle quadrangle, Alaska

USGS Publications Warehouse

Foster, Helen Laura; Menzie, W.D.; Cady, J.W.; Simpson, S.L.; Aleinikoff, J.N.; Wilson, Frederic H.; Tripp, R.B.

1987-01-01

The geology, geochemistry, geophysics, and Landsat imagery of the Circle quadrangle were investigated by an interdisciplinary research team for the purpose of assessing the mineral potential of the area. The quadrangle covers approximately 15,765 km2 in east-central Alaska; most of it is included in the mountainous Yukon-Tanana Upland physiographic division, but the northernmost part is in the low-lying Yukon Flats section. The Circle mining district, in the east-central part of the quadrangle, has been a major producing area of placer gold since its discovery in 1893. For descriptive purposes, the Circle quadrangle is divided into three areas: the northwest Circle quadrangle, the area north of the Tintina fault zone, and the area south of the Tintina fault zone. The Tintina fault zone extends northwesterly through the northern part of the quadrangle. The northwest Circle quadrangle contains mostly folded and faulted, slightly metamorphosed sedimentary rocks that are intruded by Tertiary granitic plutons. In the northern part of the area north of the Tintina fault zone (Little Crazy Mountains and northern east Crazy Mountains), the rocks consist primarily of the gabbro and basalt of the Circle Volcanics and minor associated chert, graywacke, and limestone. Elsewhere in this area (south of the Circle Volcanics and in the western Crazy Mountains), the rocks are mostly slightly metamorphosed Paleozoic sedimentary rocks that have been folded and faulted. Rocks in the largest part of the quadrangle, the area south of the Tintina fault zone, consist largely of pelitic rocks that are regionally metamorphosed to greenschist and amphibolite facies. Felsic plutons, mostly Tertiary in age, occur throughout the area. The metamorphic rocks are separated from sedimentary rocks on the northwest by thrust faulting. The aeromagnetic and gravity data show clear differences between the areas north and south of the Tintina fault zone. The metamorphic terrane to the south has low overall gravity and local gravity lows over exposed granitic plutons. It is hypothesized that magnetic chlorite schist infolded with nonmagnetic quartzite and schist account for east-northeast-trending magnetic highs that approximately parallel the regional strike of the most prominent foliation in the metamorphic rocks. North of the Tintina fault zone, the Circle Volcanics are characterized by high gravity and east-west-trending magnetic highs. The Tintina fault zone has an intense magnetic high near the western margin of the Circle quadrangle overlying the magnetic granodiorite of the Victoria Mountain pluton. A magnetic high near Circle Hot Springs is less intense, but broader, and could reflect a buried magnetic pluton similar to that of the Victoria Mountain pluton. Computer-enhanced Landsat images of the Circle quadrangle show trends and patterns of concentrations of linear features. Features trending northeast-southwest predominate throughout the quadrangle; northwest-southeast-trending linear features are found mostly south of the Tintina fault zone. High concentrations of linear features were not found to correspond to areas of known mineralization in any consistent or significant way that could presently be used in locating areas of mineralization. Geochemical and mineralogical studies of stream sediment and heavy-mineral concentrates from the Circle quadrangle identify areas of anomalous concentrations of metallic elements, including gold, silver, tin, tungsten, lead, antimony, zinc, thorium, uranium, and beryllium. The data delineate areas of known mineral occurrences and areas that may contain undiscovered mineral resources. To date, placer gold has been the only significant metallic mineral resource from the Circle quadrangle, but the general geologic setting, especially the presence of post-orogenic plutons, is similar to that of regions that contain tin greisen deposits, tungsten skarn deposits, lode gold deposits in metasedimentary roc

Controls on mineralisation in the Sierra Foothills gold province, central California, USA: A GIS-based reconnaissance prospectivity analysis

USGS Publications Warehouse

Bierlein, F.P.; Northover, H.J.; Groves, D.I.; Goldfarb, R.J.; Marsh, E.E.

2008-01-01

The assessment of spatial relationships between the location, abundance and size of orogenic-gold deposits in the highly endowed Sierra Foothills gold province in California, via the combination of field studies and a GIS-based analysis, illustrates the power of such an approach to the characterisation of important parameters of mineral systems, and the prediction of districts likely to host economic mineralisation. Regional- to deposit-scale reconnaissance mapping suggests that deposition of gold-bearing quartz veins occurred in second- and third-order, east-over-west thrusts during regional east - west compression and right-lateral transpression. At the district-scale, significant zones of mineralisation correspond with such transpressional reactivation zones and dilational jogs that developed during the Late Jurassic - Early Cretaceous along the misaligned segments of first-order faults throughout the Sierra Nevada Foothills Metamorphic Belt. Field-based observations and interpretation of GIS data (including solid geology, structural elements, deposit locations, magnetics, gravity) also highlight the importance of structural permeability contrasts, rheological gradients, and variations in fault orientation for localising mineralisation. Although this approach confirms empirical findings and produces promising results at the province scale, enhanced geological, structural, geophysical and geochronological data density is required to generate regionally consistent, high-quality input layers that improve predictive targeting at the goldfield to deposit-scale.

Limited climate control of the Chugach/St. Elias thrust wedge in southern Alaska demonstrated by orogenic widening during Pliocene to Quaternary climate change

NASA Astrophysics Data System (ADS)

Meigs, Andrew

2014-05-01

Critical taper wedge theory is the gold standard by which climate control of convergent orogenic belts is inferred. The theory predicts (and models reproduce) that an orogenic belt narrows if erosion increases in erosion in the face of a constant tectonic influx. Numerous papers now argue on the basis of thermochronologic data that the Chugach/ St. Elias Range (CSE) of southern Alaska narrowed as a direct response to Quaternary climate change because glaciers dominated erosion of the orogenic belt. The CSE formed in response to collision of a microplate with North America and is notable because glacial erosion has dominated the CSE for the past 5 to 6 Ma. An increase in sediment accumulation rates in the foreland basin over that time suggests that glacial erosion become more efficient. If correct, it is possible that glacial erosion outpaced rock influx thereby inducing a climatically controlled narrowing of the orogenic wedge during the Quaternary. Growth strata preserved within the wedge provide a test of that interpretation because they demonstrate the spatial and temporal pattern of deformation during the Pliocene to Quaternary climate transition. A thrust front established between 6 and 5 Ma jumped towards the foreland by 30 and 15 km at 1.8 and 0.25 Ma, respectively. Distributed deformation within the thrust belt accompanied the thrust front relocations. Continuous exhumation recorded by low-temperature thermochronometers occurred contemporaneously with the shortening, parallel the structural not the topographic grain, and ages become younger towards the foreland as well. Interpreted in terms of critical wedge theory, continuous distributed deformation reflects a sub-critical wedge taper resulting from the combined effects of persistent exhumation and incremental accretion and orogenic widening via thrust front jumps into the undeformed foreland. Taper angle varies according to published cross-sections and ranges from 3 to 9 degrees. If the wedge oscillated about critical taper, a pore fluid ratio between 0.7 and 0.97 is suggested by range of taper angles. Thus, the thrust belt response to Pliocene to Quaternary climate change and a likely increase in glacial coverage is in fact the opposite of the expected response of a critical-taper wedge to an increase in hinterland erosion rate. The CSE hovered near critical taper throughout the Quaternary and the tectonic influx equaled or exceeded the erosional efflux, implying that glacial erosion was paced by, not independent of, tectonic rock uplift rate.

Genesis of the Abu Marawat gold deposit, central Eastern Desert of Egypt

NASA Astrophysics Data System (ADS)

Zoheir, Basem A.; Akawy, Ahmed

2010-06-01

Gold mineralisation at the Abu Marawat mine, central Eastern Desert of Egypt, is related to a system of massive and sheared, milky quartz veins cutting a sequence of Neoproterozoic island arc metavolcanic/volcaniclastic rocks and related banded iron formation (BIF). Sulphide-bearing quartz veins and related hydrothermal breccia bodies display a range of textures including sheared, boudinaged and recrystallised quartz, open space filling and microbreccia. These variable textures imply a complex history of crack-seal mechanism characterising the relation between mineral deposition and a major N-S-trending shear zone, during a late brittle-ductile deformation event which affected the area at about 550 Ma. Gold-base metal mineralisation is associated with brecciation and fracturing of the iron ore bands, close to silicified shears and related quartz veins. The auriferous quartz lodes are characterised by the occurrence of visible pyrite-chalcopyrite ± pyrrhotite ± sphalerite ± galena mineralisation. Gold is refractory in pyrite and chalcopyrite, but rare visible gold/electrum and telluride specks were observed in a few samples. Hydrothermal alteration includes pervasive silicification, pyritisation, sericitisation, carbonatisation confined to a delicate set of veins and altered shears, and a more widespread propylitic alteration assemblage (quartz + chlorite + pyrite + calcite ± epidote). Fluid inclusion petrography and microthermometric studies suggest heterogeneous trapping of a low-salinity (1.4-6.7 wt.% eq. NaCl) aqueous solution and a carbonic fluid. Evidence for fluid immiscibility during ore formation includes variable liquid/vapour ratios in inclusions along individual trails and bulk inclusion homogenisation into liquid and occasionally to vapour at comparable temperatures. The trapping conditions of intragranular aqueous-carbonic inclusions approximate 264-378 °C at 700-1300 bar. Similar temperature estimates have been obtained from Al-in-chlorite geothermometry of chlorite associated with sulphides in the mineralised quartz veins. Fracturing enhanced fluid circulation through the wallrock and related BIF, allowing reaction of the S-bearing ore fluid with iron oxides. This caused pyrite formation and concomitant Au precipitation, enhanced by fluid immiscibility as H 2S partitioned preferentially into the carbonic phase. The ore fluids may have originated from granitoid intrusions (likely the post-Hammamat felsites, whereas gold and base metals might have been leached from the Abu Marawat basic metavolcanics.

Raman and micro-thermometric investigation of the fluid inclusions in quartz in a gold-rich formation from Lepaguare mining district (Honduras, Central America).

PubMed

Bersani, D; Salvioli-Mariani, E; Mattioli, M; Menichetti, M; Lottici, P P

2009-08-01

Fluid inclusions in the quartz crystals present in gold-rich veins from central Honduras have been studied by means of micro-thermometry and micro-Raman spectroscopy in order to provide information on the physico-chemical conditions and chemical composition of the mineralizing fluids. The use of a confocal micro-Raman apparatus allowed to obtain information on the fluid composition, in particular on the gas phase, minimizing the contributions of the host matrix to the Raman signal. The samples studied were collected from an area (Lepaguare mining district, Northern-Central Honduras) rich in ore deposits due to the Cenozoic magmatic activity, where the gold and sulphide mineralization is connected with a system of quartz veins (few decimetres thick) occurring in low-grade metamorphic rocks and produced by hydrothermal fluids. The quartz crystals present in the gold-rich veins often contain fluid inclusions. Four types of fluid inclusions have been observed, but their assemblage in the same clusters and fracture systems, as well as their comparable salinity and homogenization data, suggest that they have the same origin. Micro-thermometry and Raman spectroscopy provide a composition of the mineralizing fluids attributable to the system H(2)O-NaCl-KCl-CO(2)-CH(4), with temperature and pressure intervals of 210-413 degrees C and 1050-3850 bar, respectively. These data agree with an epigenetic origin of the gold deposit (depth < 6 km) related to granitoid or granodiorite intrusions associated to orogenic environments.

Association of gold with uraninite and pyrobitumen in the metavolcanic rock hosted hydrothermal Au-U mineralisation at Rompas, Peräpohja Schist Belt, northern Finland

NASA Astrophysics Data System (ADS)

Molnár, Ferenc; Oduro, Harry; Cook, Nick D. J.; Pohjolainen, Esa; Takács, Ágnes; O'Brien, Hugh; Pakkanen, Lassi; Johanson, Bo; Wirth, Richard

2016-06-01

The Peräpohja Schist Belt comprises a supracrustal sequence of quartzites, mafic volcanics and volcaniclastics, carbonate rocks, black shales, mica schists and greywackes which were deposited from ca. 2.44 to ~1.91 Ga, during the rifting of the Archaean basement in the eastern part of the Fennoscandian shield. Metamorphism and multiple folding of the basin fill took place during the Svecofennian orogeny (1.9-1.8 Ga) followed by intrusions of late-orogenic (1.84-1.80 Ga) and post-orogenic granitoids (1.79-1.76 Ga). The Rompas Au-U mineralisation is hosted by deformed calcsilicate veins in mafic volcanic rocks and locally contains very high grade (>10,000 g/t Au) gold pockets with strict spatial association of gold minerals to uraninite and pyrobitumen. Chemical ages from the unaltered domains in the structure of uraninite indicate a 1.95-1.90 Ga age for the deposition of the primary, high temperature (e.g. U/Th < 100 in uraninite) hydrothermal uranium mineralisation. These data are in agreement with the results of previous U-Pb dating of uraninite by SIMS. Textural evidence suggests that metamorphic recrystallisation of the uraninite-bearing quartz-dolomite veins into calcsilicate mineral assemblages during the Svecofennian orogeny (1.9-1.8 Ga) was followed by a hydrocarbon-bearing fluid flow event and radiolytic polymerisation of hydrocarbons around grains of uraninite. Gold precipitated during a subsequent hydrothermal process in the fractures of uraninite, as well as in the cracks and on the botryoidal surfaces of uraninite-pyrobitumen nodules. Remobilisation and redeposition of uranium by these hydrothermal events produced secondary uraninite grains with chemical ages between 1.85 and 1.65 Ga. Native gold is associated with galena, altaite, hunchunite, nickeline and rare cobaltite, Pb-bearing maldonite, pyrite, pyrrhotite, chalcopyrite, molybdenite and titanite. Raman spectra show disordered structure of undeformed pyrobitumen nodules in contrast with the well-ordered graphite in calcsilicate veins. Mean random reflectance data for pyrobitumen indicate 270-340 °C maximum temperature of thermal maturation—this temperature range is also considered as the temperature of gold deposition. Results of multiple sulphur isotope analyses of organic material-, pyrite- and acid-volatile-bound sulphur show distinct ranges of δ34S values for SORG and SCRS in uraninite-pyrobitumen (from -6.99 to -3.55‰ and from -10.02 to -4.41‰, respectively) and uraninite-pyrobitumen-native gold mineral associations (from +1.36 to +6.87‰ and from +0.42 to +9.7‰, respectively). Δ33S data indicate local occurrence of nonmass-dependent sulphur isotope fractionation owing to interaction of fluids with organic material. Concentration of lead in uraninite is depleted along the gold mineral filled fractures whereas the uranogenic lead isotope contents of galena, altaite and hunchuite deposited in the same fractures are extremely high, suggesting that the dominant source of lead for the crystallisation of these minerals was the radiogenic lead content of uraninite. Taking into account this source of radiogenic lead, the calculated Pb-Pb model ages for the lead minerals are between 1.75 and 1.70 Ga. Sulphur and tellurium removal from the fluid by reaction with radiogenic lead released by uraninite appears to be an important mechanism in the strongly localised deposition of gold minerals. Scavenging of sulphur by pyrobitumen nodules from gold transporting fluids was an additional process triggering precipitation of gold. Carbon particles and organic functional groups in pyrobitumen probably acted as nucleation and adsorption centres for gold minerals.

The giant Carlin gold province: A protracted interplay of orogenic, basinal, and hydrothermal processes above a lithospheric boundary

USGS Publications Warehouse

Emsbo, P.; Groves, D.I.; Hofstra, A.H.; Bierlein, F.P.

2006-01-01

Northern Nevada hosts the only province that contains multiple world-class Carlin-type gold deposits. The first-order control on the uniqueness of this province is its anomalous far back-arc tectonic setting over the rifted North American paleocontinental margin that separates Precambrian from Phanerozoic subcontinental lithospheric mantle. Globally, most other significant gold provinces form in volcanic arcs and accreted terranes proximal to convergent margins. In northern Nevada, periodic reactivation of basement faults along this margin focused and amplified subsequent geological events. Early basement faults localized Devonian synsedimentary extension and normal faulting. These controlled the geometry of the Devonian sedimentary basin architecture and focused the discharge of basinal brines that deposited syngenetic gold along the basin margins. Inversion of these basins and faults during subsequent contraction produced the complex elongate structural culminations that characterize the anomalous mineral deposit "trends." Subsequently, these features localized repeated episodes of shallow magmatic and hydrothermal activity that also deposited some gold. During a pulse of Eocene extension, these faults focused advection of Carlin-type fluids, which had the opportunity to leach gold from gold-enriched sequences and deposit it in reactive miogeoclinal host rocks below the hydrologic seal at the Roberts Mountain thrust contact. Hence, the vast endowment of the Carlin province resulted from the conjunction of spatially superposed events localized by long-lived basement structures in a highly anomalous tectonic setting, rather than by the sole operation of special magmatic or fluid-related processes. An important indicator of the longevity of this basement control is the superposition of different gold deposit types (e.g., Sedex, porphyry, Carlin-type, epithermal, and hot spring deposits) that formed repeatedly between the Devonian and Miocene time along the trends. Interestingly, the large Cretaceous Alaska-Yukon intrusion-related gold deposits (e.g., Fort Knox) are associated with the northern extension of the same lithospheric margin in the Selwyn basin, which experienced an analogous series of geologic events. ?? Springer-Verlag 2006.

The effect of scale on the interpretation of geochemical anomalies

USGS Publications Warehouse

Theobald, P.K.; Eppinger, R.G.; Turner, R.L.; Shiquan, S.

1991-01-01

The purpose of geochemical surveys changes with scale. Regional surveys identify areas where mineral deposits are most likely to occur, whereas intermediate surveys identify and prioritize specific targets. At detailed scales specific deposit models may be applied and deposits delineated. The interpretation of regional geochemical surveys must take into account scale-dependent difference in the nature and objectives of this type of survey. Overinterpretation of regional data should be resisted, as should recommendations to restrict intermediate or detailed follow-up surveys to the search for specific deposit types or to a too limited suite of elements. Regional surveys identify metallogenic provinces within which a variety of deposit types and metals are most likely to be found. At intermediate scale, these regional provinces often dissipate into discrete clusters of anomalous areas. At detailed scale, individual anomalous areas reflect local conditions of mineralization and may seem unrelated to each other. Four examples from arid environments illustrate the dramatic change in patterns of anomalies between regional and more detailed surveys. On the Arabian Shield, a broad regional anomaly reflects the distribution of highly differentiated anorogenic granites. A particularly prominent part of the regional anomaly includes, in addition to the usual elements related to the granites, the assemblage of Mo, W and Sn. Initial interpretation suggested potential for granite-related, stockwork Mo deposits. Detailed work identified three separate sources for the anomaly: a metal-rich granite, a silicified and stockwork-veined area with scheelite and molybdenite, and scheelite/powellite concentrations in skarn deposits adjacent to a ring-dike complex. Regional geochemical, geophysical and remote-sensing data in the Sonoran Desert, Mexico, define a series of linear features interpreted to reflect fundamental, northeast-trending fractures in the crust that served as the prime conduits for mineralizing fluids. At a larger scale, the linear, northeast-trending anomalies can be shown to result from a series of discrete mineralized systems with different ages and mineral assemblages. The linear pattern of anomalies disintegrates. A regional geochemical survey in the Sonoran Desert in southwestern Arizona displays a cluster of samples anomalous in Pb, Mo, Bi and W. In detail, the original regional anomaly separates into four discrete anomalous areas, each with its own distinctive suite of elements, geographic distribution and age of mineralization. A prominent regional gold anomaly in the Gobi Desert, Xinjiang, Peoples Republic of China, extends southeastward for 30 km from known lode gold deposits. Because the anomaly cuts both lithologic units and the structural grain, and because it parallels the prevailing direction of high-velocity winds, it was originally attributed to eolian dispersion. In detail, the regional anomaly consists of several east-west-trending anomalies, parallel to local lithology and structure that most likely reflect independent sources of lode gold. The regional anomaly results from smoothing of an en-echelon set of local anomalies. These examples emphasize that interpretation of regional anomalies must be tempered to consider regional-sized geologic features. Attempts to overinterpret anomalies by assigning deposit-scale attributes to regional anomalies can lead to confusion and incorrect interpretations. Potential targets that can be readily resolved only at intermediate or detailed scales of study may be overlooked. ?? 1991.

Architecture and mineral deposit settings of the Altaid orogenic collage: a revised model

NASA Astrophysics Data System (ADS)

Yakubchuk, Alexander

2004-09-01

The Altaids are an orogenic collage of Neoproterozoic-Paleozoic rocks located in the center of Eurasia. This collage consists of only three oroclinally bent Neoproterozoic-Early Paleozoic magmatic arcs (Kipchak, Tuva-Mongol, and Mugodzhar-Rudny Altai), separated by sutures of their former backarc basins, which were stitched by new generations of overlapping magmatic arcs. In addition, the Altaids host accreted fragments of the Neoproterozoic to Early Paleozoic oceanic island chains and Neoproterozoic to Cenozoic plume-related magmatic rocks superimposed on the accreted fragments. All these assemblages host important, many world-class, Late Proterozoic to Early Mesozoic gold, copper-molybdenum, lead-zinc, nickel and other deposits of various types. In the Late Proterozoic, during breakup of the supercontinent Rodinia, the Kipchak and Tuva-Mongol magmatic arcs were rifted off Eastern Europe-Siberia and Laurentia to produce oceanic backarc basins. In the Late Ordovician, the Siberian craton began its clockwise rotation with respect to Eastern Europe and this coincides with the beginning of formation of the Mugodzhar-Rudny Altai arc behind the Kipchak arc. These earlier arcs produced mostly Cu-Pb-Zn VMS deposits, although some important intrusion-related orogenic Au deposits formed during arc-arc collision events in the Middle Cambrian and Late Ordovician. The clockwise rotation of Siberia continued through the Paleozoic until the Early Permian producing several episodes of oroclinal bending, strike-slip duplication and reorganization of the magmatic arcs to produce the overlapping Kazakh-Mongol and Zharma-Saur-Valerianov-Beltau-Kurama arcs that welded the extinct Kipchak and Tuva-Mongol arcs. This resulted in amalgamation of the western portion of the Altaid orogenic collage in the Late Paleozoic. Its eastern portion amalgamated only in the early Mesozoic and was overlapped by the Transbaikal magmatic arc, which developed in response to subduction of the oceanic crust of the Paleo-Pacific Ocean. Several world-class Cu-(Mo)-porphyry, Cu-Pb-Zn VMS and intrusion-related Au mineral camps, which formed in the Altaids at this stage, coincided with the episodes of plate reorganization and oroclinal bending of magmatic arcs. Major Pb-Zn and Cu sedimentary rock-hosted deposits of Kazakhstan and Central Asia formed in backarc rifts, which developed on the earlier amalgamated fragments. Major orogenic gold deposits are intrusion-related deposits, often occurring within black shale-bearing sutured backarc basins with oceanic crust. After amalgamation of the western Altaids, this part of the collage and adjacent cratons were affected by the Siberian superplume, which ascended at the Permian-Triassic transition. This plume-related magmatism produced various deposits, such as famous Ni-Cu-PGE deposits of Norilsk in the northwest of the Siberian craton. In the early Mesozoic, the eastern Altaids were oroclinally bent together with the overlapping Transbaikal magmatic arc in response to the northward migration and anti-clockwise rotation of the North China craton. The following collision of the eastern portion of the Altaid collage with the Siberian craton formed the Mongol-Okhotsk suture zone, which still links the accretionary wedges of central Mongolia and Circum-Pacific belts. In the late Mesozoic, a system of continent-scale conjugate northwest-trending and northeast-trending strike-slip faults developed in response to the southward propagation of the Siberian craton with subsequent post-mineral offset of some metallogenic belts for as much as 70-400 km, possibly in response to spreading in the Canadian basin. India-Asia collision rejuvenated some of these faults and generated a system of impact rifts.

Late Mesozoic deformations of the Verkhoyansk-Kolyma orogenic belt, Northeast Russia

NASA Astrophysics Data System (ADS)

Fridovsky, Valery

2016-04-01

The Verkhoyansk-Kolyma orogenic belt marks the boundary between the Kolyma-Omolon superterrane (microcontinent) and the submerged eastern margin of the North Asian craton. The orogenic system is remark able for its large number of economically viable gold deposits (Natalka, Pavlik, Rodionovskoe, Drazhnoe, Bazovskoe, Badran, Malo-Tarynskoe, etc.). The Verkhoyansk - Kolyma orogenic belt is subdivided into Kular-Nera and the Polousny-Debin terranes. The Kular-Nera terrane is mainly composed of the Upper Permian, Triassic, and Lower Jurassic black shales that are metamorphosed at lower greenschist facies conditions. The Charky-Indigirka and the Chai-Yureya faults separate the Kular-Nera from the Polousny-Debin terrane that is predominantly composed of the Jurassic flyschoi dturbidites. The deformation structure of the region evolved in association with several late Mesozoic tectonic events that took place in the north-eastern part ofthe Paleo-Pacific. In Late Jurassic-Early Cretaceous several generations of fold and thrust systems were formed due to frontal accretion of the Kolyma-Omolon superterrane to the eastern margin of the North Asian craton.Thrusting and folding was accompanied by granitic magmatism, metamorphic reworking of the Late Paleozoic and the Early Mesozoic sedimentary rocks, and formation of Au-Sn-W mineralization. Three stages of deformation related to frontal accretion can be distinguished. First stage D1 has developed in the north-eastern part of the Verkhoyansk - Kolyma orogenic belt. Early tight and isoclinal folds F1 and assosiated thrusts are characteristic of D1. Major thrusts, linear concentric folds F2 and cleavage were formed during D2. The main ore-controlling structures are thrust faults forming imbricate fan systems. Frontal and oblique ramps and systems of bedding and cross thrusts forming duplexes are common. It is notable that mineralized tectonized zones commonly develop along thrusts at the contacts of rocks of contrasting competence. The superimposed structures are recognized from the early cleavage deformations. Folds F3 are often chevron type, open or tight. D1, D2 and D3 deformations are coaxial. In the Late-Neocomian-Aptian the Kolyma-Omolon superterrane started moving to the west. As a result, the thrust faults were reactivated with sinistral strike-slip motions along fault planes. At that time, granitoids of the North and Transverse belts were emplaced in the northwestern part of the Kolyma-Omolon superterrane. The strike slip faults were associated with cross open folds. The postacrettionary stage is associated with the development of the Albian-Late Cretaceous Okhotsk-Chukotka subduction zone. During this stage strike-slip faults and associated deformation structures were superimposed upon accretion-related tectonic structures of the Verkhoyansk - Kolyma orogenic belt.

Genesis of the hydrothermal gold deposits in the Canan area, Lepaguare District, Honduras

NASA Astrophysics Data System (ADS)

Mattioli, Michele; Menichetti, Marco; Renzulli, Alberto; Toscani, Lorenzo; Salvioli-Mariani, Emma; Suarez, Pedro; Murroni, Alessandro

2014-04-01

The Canan area (Honduras) is characterized by a gold-bearing ore deposit that is associated with quartz-veined shear zones. Gold mineralization occurs in low-to medium-grade metamorphic host-rocks (graphitic and sericitic schists). Hydrothermal fluids, which are associated with the emplacement of Cretaceous-Tertiary granodioritic intrusions, are responsible for the formation of quartz veins and the hydrothermal alteration of wall-rocks. Three main altered zones have been detected in the wall-rocks as far as 150 cm from the quartz veins. The distal zone (up to 50-cm thick) contains quartz, chlorite and illite. The intermediate zone is the thickest (up to 80 cm) and is marked by quartz, muscovite, sulphides, kaolinite and native elements such as Au and Ag. The proximal zone, which is close to the quartz veins, is rather thin (up to 25 cm) and contains clay minerals, Al-oxides-hydroxides and sulphides. The transition from the distal to the proximal zone is accompanied by the enrichment of SiO2 and the depletion of all other major elements, except for Fe2O3(tot). Precious metals occur in the highest concentrations in the intermediate zone (Au up to 7.6 ppm and Ag up to 11 ppm). We suggest that gold was transported as a reduced sulphur complex and was precipitated from the hydrothermal solution by the reaction of the sulphur complexes with Fe2+ from the alteration of the mafic minerals of the host-rock. Fluid-wall-rock interactions seem to be the main cause of gold mineralization. Genetic relationships with a strike-slip fault system, hydrothermal alteration zones within the metamorphic wall-rocks, and an entire set of geochemical anomalies are consistent with orogenic-type gold deposits of the epizonal class.

New true-triaxial rock strength criteria considering intrinsic material characteristics

NASA Astrophysics Data System (ADS)

Zhang, Qiang; Li, Cheng; Quan, Xiaowei; Wang, Yanning; Yu, Liyuan; Jiang, Binsong

2018-02-01

A reasonable strength criterion should reflect the hydrostatic pressure effect, minimum principal stress effect, and intermediate principal stress effect. The former two effects can be described by the meridian curves, and the last one mainly depends on the Lode angle dependence function. Among three conventional strength criteria, i.e. Mohr-Coulomb (MC), Hoek-Brown (HB), and Exponent (EP) criteria, the difference between generalized compression and extension strength of EP criterion experience a firstly increase then decrease process, and tends to be zero when hydrostatic pressure is big enough. This is in accordance with intrinsic rock strength characterization. Moreover, the critical hydrostatic pressure I_c corresponding to the maximum difference of between generalized compression and extension strength can be easily adjusted by minimum principal stress influence parameter K. So, the exponent function is a more reasonable meridian curves, which well reflects the hydrostatic pressure effect and is employed to describe the generalized compression and extension strength. Meanwhile, three Lode angle dependence functions of L_{{MN}}, L_{{WW}}, and L_{{YMH}}, which unconditionally satisfy the convexity and differential requirements, are employed to represent the intermediate principal stress effect. Realizing the actual strength surface should be located between the generalized compression and extension surface, new true-triaxial criteria are proposed by combining the two states of EP criterion by Lode angle dependence function with a same lode angle. The proposed new true-triaxial criteria have the same strength parameters as EP criterion. Finally, 14 groups of triaxial test data are employed to validate the proposed criteria. The results show that the three new true-triaxial exponent criteria, especially the Exponent Willam-Warnke criterion (EPWW) criterion, give much lower misfits, which illustrates that the EP criterion and L_{{WW}} have more reasonable meridian and deviatoric function form, respectively. The proposed new true-triaxial strength criteria can provide theoretical foundation for stability analysis and optimization of support design of rock engineering.

40Ar/39Ar geochronological constraints on the formation of the Dayingezhuang gold deposit: New implications for timing and duration of hydrothermal activity in the Jiaodong gold province, China

USGS Publications Warehouse

Yang, Li-Qiang; Deng, J.; Goldfarb, Richard J.; Zhang, Jiahua; Gao, Bang-Fei; Wang, Zhong-Liang

2014-01-01

China's largest gold resource is located in the highly endowed northwestern part of the Jiaodong gold province. Most gold deposits in this area are associated with the NE- to NNE-trending shear zones on the margins of the 130–126 Ma Guojialing granite. These deposits collectively formed at ca. 120 ± 5 Ma during rapid uplift of the granite. The Dayingezhuang deposit is a large (> 120 t Au) orogenic gold deposit in the same area, but located along the eastern margin of the Late Jurassic Linglong Metamorphic Core Complex. New 40Ar/39Ar geochronology on hydrothermal sericite and muscovite from the Dayingezhuang deposit indicate the gold event is related to evolution of the core complex at 130 ± 4 Ma and is the earliest important gold event that is well-documented in the province. The Dayingezhuang deposit occurs along the Linglong detachment fault, which defines the eastern edge of the ca. 160–150 Ma Linglong granite–granodiorite massif. The anatectic rocks of the massif were rapidly uplifted, at rates of at least 1 km/m.y. from depths of 25–30 km, to form the metamorphic core complex. The detachment fault, with Precambrian metamorphic basement rocks in the hangingwall and the Linglong granitoids and migmatites in the footwall, is characterized by early mylonitization and a local brittle overprinting in the footwall. Gold is associated with quartz–sericite–pyrite–K-feldspar altered footwall cataclasites at the southernmost area of the brittle deformation along the detachment fault. Our results indicate that there were two successive, yet distinct gold-forming tectonic episodes in northwestern Jiaodong. One event first reactivated the detachment fault along the edge of the Linglong massif between 134 and 126 Ma, and then a second reactivated the shears along the margins of the Guojialing granite. Both events may relate to a component of northwest compression after a middle Early Cretaceous shift from regional NW–SE extension to a NE–SW extensional regime.

Surface-water, ground-water, and sediment geochemistry of epizonal and shear-hosted mineral deposits in the Tintina Gold Province--arsenic and antimony distribution and mobility: Chapter G in Recent U.S. Geological Survey studies in the Tintina Gold Province, Alaska, United States, and Yukon, Canada--results of a 5-year project

USGS Publications Warehouse

Mueller, Seth H.; Goldfarb, Richard J.; Verplanck, Philip L.; Trainor, Thomas P.; Sanzolone, Richard F.; Adams, Monique; Gough, Larry P.; Day, Warren C.

2007-01-01

Epigenetic mineral deposits in the Tintina Gold Province are generally characterized by high concentrations of arsenic and antimony in their mineral assemblage. A total of 347 samples (ground water, surface water, and stream sediment) were collected to investigate the distribution and mobility of arsenic and antimony in the environment near known mineral deposits. Samples were collected from east to west at Keno Hill and Brewery Creek, Yukon, Canada; and Cleary Hill, True North, Scrafford Mine, Fairbanks, Ryan Lode, Stampede Creek, Slate Creek, and Donlin Creek, all in Alaska. Surface- and ground-water samples are all slightly acidic to near-neutral in pH (5-8), have a wide range in specific conductance (surface water 17-2,980 microsiemens per centimeter and ground water 170-2,940 microsiemens per centimeter), and show elevated dissolved arsenic and antimony concentrations (arsenic in surface water is less than 1 to 380 micrograms per liter and in ground water is less than 1 micrograms per liter to 1.5 milligrams per liter; antimony in surface water is less than 2 to 660 micrograms per liter and in ground water is less than 2 to 60 micrograms per liter). Stream sediments downstream from these deposits have high concentrations of arsenic and antimony (arsenic median is 1,670 parts per million, maximum is 10,000 parts per million; antimony median is 192 parts per million, maximum is 7,200 parts per million). The mobility of arsenic and antimony is controlled by the local redox environment, with arsenic being less mobile in oxidized surface waters relative to antimony, and arsenic more mobile in reduced ground water. These factors suggest that both antimony and arsenic may be useful pathfinder elements in water and sediment for targeting similar style deposits elsewhere in the Tintina Gold Province.

Magnetotelluric characterization of the northern margin of the Yilgarn Craton (Western Australia)

NASA Astrophysics Data System (ADS)

Piña-Varas, Perla; Dentith, Michael

2017-04-01

The northern margin of the Yilgarn Craton (Western Australia) was deformed during the convergence and collision with the Pilbara Craton and the intervening Glenburgh Terrain that created the Capricorn Orogen. The Yilgarn Craton is one of the most intensively mineralised areas of continental crust with world class deposits of gold and nickel. However, the region to its north has surprisingly few deposits. Cratonic margins are considered to be key indicators of prospectivity at a regional scale. The northern limit of the Yilgarn Craton within the Capricorn Orogen is not well resolved at date because of overlying Proterozoic sedimentary basins. We present here some of the results of an extensive magnetotelluric (MT) study that is being performed in the area. This study is a component of large multi-disciplinary geoscience project on the 'Distal Footprints of Giant Ore Systems' in the Capricorn Orogen. The MT dataset consists of a total of 240 broadband magnetotelluric stations (BBMT) and 84 long period stations (LMT). Analysis of the dataset reveals a clear 3-D geoelectrical behaviour and extreme complexity for most of the sites, including an extremely high number of sites with phases out-of-quadrant at long periods. 3-D inverse modelling of the MT data shows high resistivity Archean units and low resistivity Paleoproterozoic basins, including very low resistivity structures at depth. These strong resistivity contrasts allow us to successfully map northern margin of the Yilgarn Craton beneath basin cover, as well as identifying major lateral conductivity changes in the deep crust suggestive of different tectonic blocks. Upper crustal conductive zones can be correlated with faults on seismic reflection data. Our results suggest MT surveys are a useful tool for regional-scale exploration in the study area and in area of thick cover in general.

Geology of the world-class Kiaka polyphase gold deposit, West African Craton, Burkina Faso

NASA Astrophysics Data System (ADS)

Fontaine, Arnaud; Eglinger, Aurélien; Ada, Koumangdiwè; André-Mayer, Anne-Sylvie; Reisberg, Laurie; Siebenaller, Luc; Le Mignot, Elodie; Ganne, Jérôme; Poujol, Marc

2017-02-01

The Kiaka gold deposit is a major resource in West Africa, with measured and indicated resources of 124 Mt at 1.09 g/t Au (3.9 Moz) and inferred resources of 27 Mt at 0.83 g/t Au (0.8 Moz). Located within the Manga-Fada N'Gourma greenstone and plutonic belt in south of the Burkina Faso, the deposit is hosted by a metamorphosed volcano-sedimentary sequence of lithic-, quartz-biotite metagreywackes, aluminosilicate-bearing metapelites and garnet-orthopyroxene-bearing schists and volcanic units. Structural observations indicate four local deformation events: DK1, DK2 and DK3 and DK4. Respectively, these events are linked to regional D1 E-W compression, D2 NW-SE compression and lastly, D3- and D4-related reactivations along D2 shear zones. The S2 foliation and D2 shear zones are developed during lower amphibolite facies metamorphism whereas retrogression occurs during D3-4 reactivations along these shear zones at upper greenschist facies conditions. The emplacement of a dioritic intrusion, dated at 2140 ± 7 Ma (Concordia U-Pb age on magmatic zircon), is interpreted to be contemporaneous with sinistral displacement along mineralized, NE-trending D2 shear zones. The intersection of these shears zones and the Markoye shear zone (dextral-reverse D1 and sinistral-reverse D2 reactivations) controlled the final geometry of the host rocks and the ore zones. Four subparallel elongated ore bodies are mainly hosted within D2-related shear zones and some are developed in an apparent axial plane of a F2 isoclinal fold. Detailed petrographic studies have identified two main types of hydrothermal alteration associated with two stages of gold mineralization. The stage (1) corresponds to replacement zones with biotite and clinozoisite during the D2 event associated with pyrrhotite ± pyrite, chalcopyrite (disseminated gold stage). The stage (2) occurs during reactivations of the D2-related auriferous shear zones (vein stage) and is characterized by diopside ± actinolite D3 veins and veinlets and D4 pervasive muscovite, ± chlorite, ± calcite in quartz-carbonate vein selvages and associated with pyrrhotite + arsenopyrite ± electrum, ± native gold and tellurobismuthite. The latter stage (2) could be divided into two sub-stages based on mineralogy and crosscutting relationship. A weighted average Re-Os pyrrhotite age at 2157 ± 24 Ma (Re-Os age based on 3 replicates) constraints the timing of the disseminated gold stage and represents the first absolute age for gold mineralization in the Manga Fada N'Gourma area. The timing of gold at Kiaka may be also coeval with one of the two lode gold event at ∼ ca. 2.16-2.15 Ga and occurred concomitant with tectono-thermal activity during Eo-Eburnean orogeny. The study of the Kiaka gold deposit emphasizes the importance of a multi-scale and multidisciplinary approach (field observations, petrography geothermobarometry and geochronology) to decipher the polyphase character of some Paleoproterozoic gold deposits.

The Yatela gold deposit in Mali, West Africa: The final product of a long-lived history of hydrothermal alteration and weathering

NASA Astrophysics Data System (ADS)

Masurel, Quentin; Miller, John; Hein, Kim A. A.; Hanssen, Eric; Thébaud, Nicolas; Ulrich, Stanislav; Kaisin, Jean; Tessougue, Samuel

2016-01-01

The Yatela gold deposit is located in the Kédougou-Kénieba inlier (KKI), a window of ca. 2200-2050 Ma rocks that are exposed in eastern Senegal and western Mali. The geology of the KKI differs from other Paleoproterozoic granite-greenstone belts and sedimentary basins by the abundance of carbonate rocks. The Yatela deposit occurs within 8 km of the regional-scale Senegal-Mali Shear Zone. Country rocks in the Yatela region have been subjected to polycyclic deformation and regional greenschist-facies metamorphism. A syn-kinematic diorite stock has intruded the metasedimentary sequences in the open pit and is associated with a hornblende-hornfels contact aureole. Field relationships and micro-textural data indicate that the primary gold mineralisation is shear-hosted. The similar relative timing and structural setting between the Yatela primary gold mineralisation and other world-class deposits in the region (e.g., Loulo, Lawrence et al., 2013a; Massawa, Treloar et al., 2014; Sadiola Hill, Masurel et al., in press) suggest that regional orogenic gold mineralisation occurred during a period of transcurrent tectonics, after the cessation of regional compressional deformation. The primary gold mineralisation at Yatela, however, is low-grade and sub-economic. It is hosted by marbles and, to a lesser extent, diorite. The primary ore is pyrite-rich, with abundant chalcopyrite, minor arsenopyrite and accessory Zn-Pb-Sb-Fe-Ag-Co-Ni-bearing mineral species. Post-Birimian surficial dissolution of hydrothermally altered and mineralised host marbles resulted in the creation of troughs, which were draped and infilled with a ferruginous dissolution residue enriched in gold. This auriferous residuum formed the economic resource mined at Yatela until decommissioning in 2013. The Yatela gold deposit is unique with respect to mineralisation types encountered in West Africa because an auriferous residuum of economic interest (>1 Moz) derives from an underlying sub-economic Birimian occurrence. This study provides a new appreciation for the economic interest of Yatela-style orebodies and their prospectivity in other gold provinces of the West African Craton where carbonates are present, such as in the Siguiri basin in Guinea and the Ity region in western Côte d'Ivoire.

Mineral resources of the Whipple Mountains and Whipple Mountains Addition Wilderness Study Areas, San Bernardino County, California

USGS Publications Warehouse

Marsh, Sherman P.; Raines, Gary L.; Diggles, Michael F.; Howard, Keith A.; Simpson, Robert W.; Hoover, Donald B.; Ridenour, James; Moyle, Phillip R.; Willett, Spencee L.

1988-01-01

At the request of the U.S. Bureau of Land Management, approximately 85,100 acres of the Whipple Mountains Wilderness Study Area (CDCA-312) and 1,380 acres of the Whipple Mountains Addition Wilderness Study Area (AZ-050-010) were evaluated for identified mineral resources (known) and mineral resource potential (undiscovered). In this report, the Whipple Mountains and Whipple Mountains Addition Wilderness Study Areas are referred to as simply "the study area." Most of the mines and prospects with identified resources in the Whipple Mountains Wilderness Study Area are within areas designated as having mineral resource potential. The area in and around the Turk Silver mine and the Lucky Green group and the area near the northwest boundary of the study area have high mineral resource potential for copper, lead, zinc, gold, and silver. An area along the west boundary of the study area has moderate resource potential for copper lead, zinc, gold, and silver. An area in the east adjacent to the Whipple Mountains Addition Wilderness Study Area has moderate resource potential for copper, gold, and silver resources. One area on the north boundary and one on the southeast boundary of the study area have low mineral resource potential for copper, lead, zinc, gold, and silver. Two areas, one on the north boundary and one inside the east boundary of the study area, have moderate resource potential for manganese. A small area inside the south boundary of the study area has high resource potential for decorative building stone, and the entire study area has low resource potential for sand and gravel and other rock products suitable for construction. Two areas in the eastern part of the study area have low resource potential for uranium. There is no resource potential for oil and gas or geothermal resources in the Whipple Mountains Wilderness Study Area. Sites within the Whipple Mountains Wilderness Study Area with identified resources of copper, gold, silver, manganese and (or) decorative building stone are located at the Stewart mine, New American Eagle mine, Turk Silver mine, Twin Lode mine, decorative stone property, Lucky Green group, Blue Cloud mine, Nickel Plate mine, Crescent mine, Quadrangle Copper group, and the Copper Basin mine. The Whipple Mountains Addition Wilderness Study Area has moderate resource potential for copper, gold, and silver resources and low resource potential for sand and gravel and other rock products. There is no resource potential for oil and gas or for geothermal energy in the Whipple Mountains Addition Wilderness Study Area. Although there are no identified resources in the Whipple Mountains Addition Wilderness Study Area, sites within and immediately adjacent warrant further study because of gold assays from widespread, numerous samples.

Curie surface of Borborema Province, Brazil

NASA Astrophysics Data System (ADS)

Correa, Raphael T.; Vidotti, Roberta M.; Oksum, Erdinc

2016-06-01

The Curie surface interpreted from magnetic data through spatial frequency domain techniques is used to provide information on the thermal structure of Borborema Province. The Borborema Province is part of the neoproterozoic collision of an orogenic system situated between the São Francisco-Congo and São Luís-West Africa cratons, which formed the Gondwana Supercontinent. The Curie surface of Borborema Province varies from 18 to 59 km, which reveals the complexity in the crustal composition of the study area. The thermal structure shows different crustal blocks separated by the main shear zones, which corroborates the evolution model of allochthonous terranes. The Curie surface signature for the west portion of Pernambuco Shear Zone may indicate processes of mantle serpentinization, once the Curie isotherm is deeper than Mohorovic discontinuity. In this region, the amplitude of Bouguer anomaly decreases, which corroborates long wavelength anomaly observed in the magnetic anomaly. We interpreted this pattern as evidence of the Brasiliano-Pan-Africano's subduction/collision event. Earthquakes in the region are concentrated mainly in shallow Curie surface regions (less resistant crust) and in transition zones between warm and cold blocks. We calculated the horizontal gradient of the Curie depth to emphasize the signature of contact between the thermal blocks. These regions mark possible crustal discontinuities, and have high correlation with orogenic gold occurrence in the study area.

The Krásná Hora, Milešov, and Příčovy Sb-Au ore deposits, Bohemian Massif: mineralogy, fluid inclusions, and stable isotope constraints on the deposit formation

NASA Astrophysics Data System (ADS)

Němec, Matěj; Zachariáš, Jiří

2018-02-01

The Krásná Hora-Milešov and Příčovy districts (Czech Republic) are the unique examples of Sb-Au subtype orogenic gold deposits in the Bohemian Massif. They are represented by quartz-stibnite veins and massive stibnite lenses grading into low-grade, disseminated ores in altered host rocks. Gold postdates the stibnite and is often replaced by aurostibite. The ore zones are hosted by hydrothermally altered dikes of lamprophyres (Krásná Hora-Milešov) or are associated with local strike-slip faults (Příčovy). Formation of Sb-Au deposits probably occurred shortly after the main gold-bearing event (348-338 Ma; Au-only deposits) in the central part of the Bohemian Massif. Fluid inclusion analyses suggest that stibnite precipitated at 250 to 130 °C and gold at 200 to 130 °C from low-salinity aqueous fluids. The main quartz gangue hosting the ore precipitated from the same type of fluid at about 300 °C. Early quartz-arsenopyrite veins are not associated with the Sb-Au deposition and formed from low-salinity, aqueous-carbonic fluid at higher pressure and temperature ( 250 MPa, 400 °C). The estimated oxygen isotope composition of the ore-bearing fluid (4 ± 1‰ SMOW; based on post-ore calcite) suggests its metamorphic or mixed magmatic-metamorphic origin and excludes the involvement of meteoric water. Rapid cooling of warm hydrothermal fluids reacting with "cold" host rock was probably the most important factor in the formation of both stibnite and gold.

Water and Sediment Chemical Data and Data Summary for Samples Collected in 1999 and 2001 in the Goodpaster River Basin, Big Delta B-2 Quadrangle, Alaska

USGS Publications Warehouse

Wang, Bronwen; Gough, Larry; Wanty, Richard; Vohden, Jim; Crock, Jim; Day, Warren

2006-01-01

We report the chemical analysis for water and sediment collected from the Big Delta B-2 quadrangle. These data are part of a study located in the Big Delta B-2 quadrangle that focused on the integration of geology and bedrock geochemistry on with the biogeochemistry of water, sediments, soil, and vegetation. The discovery of the Pogo lode gold deposit in the northwest corner of the quadrangle was the impetus for this study. The study objectives were to create a geologic map, evaluate the bedrock geochemical influence on the geochemical signature of the surficial environment, and define landscape-level predevelopment geochemical baselines. Important to baseline development is an evaluation of what, if any, geochemical difference exists between the mineralized and non-mineralized areas within a watershed or between mineralized and non-mineralized watersheds. The analytic results for the bedrock, soils, and vegetation are reported elsewhere. Presented here, with minimal interpretation, is the analytic data for the water and sediment samples collected in the summers of 1999 and 2001, and a summary statistics of these analyses.

Aeromagnetometry of the El Papalote H12A-13 Chart Northwestern Sonora, México: Relationships to Regional Geology and Mineral Deposits

NASA Astrophysics Data System (ADS)

Martinez-Retama, S.; Pérez-Segura, E.; Vega-Granillo, R.

2014-12-01

This study is focused in obtaining a geophysical-geological characterization of magnetic anomalies associated with outcropping or buried rock bodies and its possible relation to ore deposits. To do this, total field aeromagnetic data from the Mexican Geological Survey were processed. Reduction to pole and residual anomaly maps show two main elongated dipolar high-amplitude anomalies, a first NE-SW directed, which is located in the NW portion of the card, and a second corresponding to a belt with NW-SE direction that is located SW of the chart, near the eastern region of the "El Elegante" volcano. Above structures have not been mapped in the surface; however, the well-defined magnetic anomalies indicate its existence below Quaternary sediments. The geology of the chart is only partially known. The outcropping units, mostly in the Sierra de Los Tanques, are Paleoproterozoic igneous and metamorphic rocks; Permian-Triassic granitoids; and Jurassic and Tertiary volcanic and volcanosedimentary rocks. About 50% of the card is covered by Quaternary sediments, there the interest of these geophysical studies. The NW-SE oriented deep magnetic anomaly follows the same direction as the Sierra San Francisco (SSF) located south of Los Norteños chart H12A-2. This mountain is composed of Paleoproterozoic metamorphic rocks intruded by Upper Cretaceous granitoids. Numerous mineral manifestations of orogenic gold type occurred in that range. This anomaly can be interpreted in 2 ways: first: as a NW extension of a landform similar to the SSF, which dips to NW or that is more erosionated; or; second: as an extension of the SSF to the NW displaced by a normal fault oriented ~N60E, roughly following the Palo Fierro creek indicated on the map. Either of the two possible interpretations, the magnetic anomaly indicates an interesting target in the search of orogenic gold deposits that could be buried in the area.

Late paleozoic base and precious metal deposits, East Tianshan, Xinjiang, China: Characteristics and geodynamic setting

USGS Publications Warehouse

Mao, J.; Goldfarb, R.J.; Wang, Y.; Hart, C.J.; Wang, Z.; Yang, J.

2005-01-01

The East Tianshan is a remote Gobi area located in eastern Xinjiang, northwestern China. In the past several years, a number of gold, porphyry copper, and Fe(-Cu) and Cu-Ag-Pb-Zn skarn deposits have been discovered there and are attracting exploration interest. The East Tianshan is located between the Junggar block to the north and early Paleozoic terranes of the Middle Tianshan to the south. It is part of a Hercynian orogen with three distinct E-W-trending tectonic belts: the Devonian-Early Carboniferous Tousuquan-Dananhu island arc on the north and the Carboniferous Aqishan - Yamansu rift basin to the south, which are separated by rocks of the Kanggurtag shear zone. The porphyry deposits, dated at 322 Ma, are related to the late evolutionary stages of a subduction-related oceanic or continental margin arc. In contrast, the skarn, gold, and magmatic Ni-Cu deposits are associated with post-collisional tectonics at ca. 290-270 Ma. These Late Carboniferous - Early Permian deposits are associated with large-scale emplacement and eruption of magmas possibly caused by lithosphere delamination and rifting within the East Tianshan.

Role of mantle dynamics in rebuilding the Tianshan Orogenic Belt in NW China: A seismic tomographic investigation

NASA Astrophysics Data System (ADS)

He, Chuansong; Santosh, M.

2018-05-01

The Tianshan orogenic belt, Junggar terrane and Altai terrane are located at the southwestern part of the Central Asian Orogenic Belt (CAOB). Here, we investigate the velocity structure beneath the Xinjiang region in NW China, which includes the Tarim terrane, Tianshan orogenic belt, Junggar terrane and Altai terrane with a view to evaluate the mantle dynamics based on teleseismic data recorded by 103 seismic stations. Our tomographic results show both high and low velocity perturbations beneath the Tianshan orogenic belt. We suggest that the high velocity perturbations beneath this orogenic belt might represent the northward subducted lithosphere of the Tarim Basin and the southward subducted lithosphere of the Junggar Basin. The low velocity structure beneath the Tianshan orogenic belt might represent asthenosphere upwelling that triggered the extensive magmatism which contributed to rebuilding of the Tianshan orogenic belt.

The shear zone-related gold mineralization at the Turmalina deposit, Quadrilátero Ferrífero, Brazil: structural evolution and the two stages of mineralization

NASA Astrophysics Data System (ADS)

Fabricio-Silva, Wendell; Rosière, Carlos Alberto; Bühn, Bernhard

2018-05-01

Turmalina is an important orogenic gold deposit located in the NW region of the Quadrilátero Ferrífero. The deposit is hosted in an Archean greenstone belt composed of ortho-amphibolites and pelites with interleaved tuffs metamorphosed under amphibolite facies conditions and intruded by a granite stock. The orebodies are controlled by WNW-ESE-trending shear zones, associated with hydrothermal alteration. Three deformation events are recognized in the Turmalina gold deposit: D1 and D2 are the result of a progressive Archean deformation under ductile conditions between 2749 ± 7 and 2664 ± 35 Ma; D3 is characterized by a transpressional event under ductile-brittle conditions with the age still unclear. The three generations of garnet observed show that Grt1 blastesis is pre- to syn-D1 and Grt2 growth during the late to post-deformation stages of the D2 event. The initial temperature (Grt1 core) is around 548-600 °C, whereas during late D2, the temperatures reached 633 °C (metamorphic peak-Grt2 rim), likely as a result of granite intrusion. The Grt3 resulted from re-equilibration under retrograde conditions. Two gold-bearing sulfide stages were identified: pyrrhotite-arsenopyrite ± löllingite ± chalcopyrite ± gold stage I precipitated below a metamorphic peak temperature of 598 ± 19 °C associated with S1 foliation (D1), and pyrrhotite-pyrite-arsenopyrite ± chalcopyrite ± gold stage II is located commonly along V3 quartz-carbonate veinlets with a temperature range between 442 ± 9 and 510 ± 30 °C. We suggest that the granite intrusion imposed an additional thermal effect that promoted further dehydration of country rocks. The Au derived mainly from a metamorphic fluid source but potentially mixed with magmatic fluids from the granite.

Metallogenic belt and mineral deposit maps of northeast Asia

USGS Publications Warehouse

Obolenskiy, Alexander A.; Rodionov, Sergey M.; Dejidmaa, Gunchin; Gerel, Ochir; Hwang, Duk-Hwan; Miller, Robert J.; Nokleberg, Warren J.; Ogasawara, Masatsugu; Smelov, Alexander P.; Yan, Hongquan; Seminskiy, Zhan V.

2013-01-01

This report contains explanatory material and summary tables for lode mineral deposits and placer districts (Map A, sheet 1) and metallogenic belts of Northeast Asia (Maps B, C, and D on sheets 2, 3, and 4, respectively). The map region includes eastern Siberia, southeastern Russia, Mongolia, northeast China, and Japan. A large group of geologists—members of the joint international project, Major Mineral Deposits, Metallogenesis, and Tectonics of Northeast Asia—prepared the maps, tables, and introductory text. This is a cooperative project with the Russian Academy of Sciences, Mongolian Academy of Sciences, Mongolian National University, Ulaanbaatar, Mongolian Technical University, Mineral Resources Authority of Mongolia, Geological Research Institute, Jilin University, China Geological Survey, Korea Institute of Geoscience and Mineral Resources, Geological Survey of Japan, and U.S. Geological Survey. This report is one of a series of reports on the mineral resources, geodynamics, and metallogenesis of Northeast Asia. Companion studies include (1) a detailed geodynamics map of Northeast Asia (Parfenov and others, 2003); (2) a compilation of major mineral deposit models (Rodionov and Nokleberg, 2000; Rodionov and others, 2000); (3) a series of metallogenic belt maps (Obolenskiy and others, 2004); (4) location map of lode mineral deposits and placer districts of Northeast Asia (Ariunbileg and others, 2003b); (5) descriptions of metallogenic belts (Rodionov and others, 2004); (6) a database on significant metalliferous and selected nonmetalliferous lode deposits and selected placer districts (Ariunbileg and others, 2003a); and (7) a series of summary project publications (Ariunbileg and 74 others, 2003b).

Porphyry copper assessment of the Central Asian Orogenic Belt and eastern Tethysides: China, Mongolia, Russia, Pakistan, Kazakhstan, Tajikistan, and India: Chapter X in Global mineral resource assessment

USGS Publications Warehouse

Mihalasky, Mark J.; Ludington, Stephen; Hammarstrom, Jane M.; Alexeiev, Dmitriy V.; Frost, Thomas P.; Light, Thomas D.; Robinson, Gilpin R.; Briggs, Deborah A.; Wallis, John C.; Miller, Robert J.; Bookstrom, Arthur A.; Panteleyev, Andre; Chitalin, Andre; Seltmann, Reimar; Guangsheng, Yan; Changyun, Lian; Jingwen, Mao; Jinyi, Li; Keyan, Xiao; Ruizhao, Qiu; Jianbao, Shao; Gangyi, Shai; Yuliang, Du

2015-01-01

The U.S. Geological Survey collaborated with international colleagues to assess undiscovered resources in porphyry copper deposits in the Central Asian Orogenic Belt and eastern Tethysides. These areas host 20 known porphyry copper deposits, including the world class Oyu Tolgoi deposit in Mongolia that was discovered in the late 1990s. The study area covers major parts of the world’s largest orogenic systems. The Central Asian Orogenic Belt is a collage of amalgamated Precambrian through Mesozoic terranes that extends from the Ural Mountains in the west nearly to the Pacific Coast of Asia in the east and records the evolution and final closure of the Paleo-Asian Ocean in Permian time. The eastern Tethysides, the orogenic belt to the south of the Central Asian Orogenic Belt, records the evolution of another ancient ocean system, the Tethys Ocean. The evolution of these orogenic belts involved magmatism associated with a variety of geologic settings appropriate for formation of porphyry copper deposits, including subduction-related island arcs, continental arcs, and collisional and postconvergent settings. The original settings are difficult to trace because the arcs have been complexly deformed and dismembered by younger tectonic events. Twelve mineral resource assessment tracts were delineated to be permissive for the occurrence of porphyry copper deposits based on mapped and inferred subsurface distributions of igneous rocks of specific age ranges and compositions. These include (1) nine Paleozoic tracts in the Central Asian Orogenic Belt, which range in area from about 60,000 to 800,000 square kilometers (km2); (2) a complex area of about 400,000 km2 on the northern margin of the Tethysides, the Qinling-Dabie tract, which spans central China and areas to the west, encompassing Paleozoic through Triassic igneous rocks that formed in diverse settings; and (3) assemblages of late Paleozoic and Mesozoic rocks that define two other tracts in the Tethysides, the 100,000 km2 Jinsajiang tract and the 300,000 km2 Tethyan-Gangdese tract. Assessment participants evaluated applicable grade and tonnage models and estimated numbers of undiscovered deposits at different confidence levels for each permissive tract. The estimates were then combined with the selected grade and tonnage models using Monte Carlo simulations to generate probabilistic estimates of undiscovered resources. Additional resources in extensions of deposits with identified resources were not specifically evaluated. Assessment results, presented in tables and graphs, show amounts of metal and rock in undiscovered deposits at selected quantile levels of probability (0.95, 0.9, 0.5, 0.1, and 0.05 confidence levels), as well as the arithmetic mean and associated standard deviations and variances for each tract. This assessment estimated a total of 97 undiscovered porphyry copper deposits within the assessed permissive tracts. This represents nearly five times the 20 known deposits. Predicted mean resources that could be associated with these undiscovered deposits are about 370,000,000 metric tons (t) of copper, 10,000 t of gold, 7,700,000 t of molybdenum, and 120,000 t of silver. The assessment area is estimated to contain about five times as much copper in undiscovered deposits as has been identified to date. This report includes a summary of the data used in the assessment, a brief overview of the geologic framework of the area, descriptions of permissive tracts and known deposits, maps, and tables. A geographic information system database that accompanies this report includes the tract boundaries and known porphyry copper deposits, significant prospects, and prospects. Assessments of overlapping younger rocks and adjacent areas are included in separate reports available on-line at http://minerals.usgs.gov/global/.

Tracking the Archean-Proterozoic suture zone in the northeastern Great Basin, Nevada and Utah

USGS Publications Warehouse

Rodriguez, B.D.; Williams, J.M.

2008-01-01

It is important to know whether major mining districts in north-central Nevada are underlain by crust of the Archean Wyoming craton, known to contain major orogenic gold deposits or, alternatively, by accreted crust of the Paleoproterozoic Mojave province. Determining the location and orientation of the Archean-Proterozoic suture zone between these provinces is also important because it may influence subsequent patterns of sedimentation, deformation, magmatism, and hydrothermal activity. The suture zone is exposed in northeastern Utah and south-western Wyoming and exhibits a southwest strike. In the Great Basin, the suture zone strike is poorly constrained because it is largely concealed below a Neoproterozoic-Paleozoic miogeocline and Cenozoic basin fill. Two-dimensional resistivity modeling of three regional north-south magnetotelluric sounding profiles in western Utah, north-central Nevada, and northeastern Nevada, and one east-west profile in northeastern Nevada, reveals a deeply penetrating (>10 km depth), broad (tens of kilometers) conductor (1-20 ohm-meters) that may be the Archean-Proterozoic suture zone, which formed during Early Proterozoic rifting of the continent and subsequent Proterozoic accretion. This major crustal conductor changes strike direction from southwest in Utah to northwest in eastern Nevada, where it broadens to ???100 km width that correlates with early Paleozoic rifting of the continent. Our results suggest that the major gold belts may be over-isolated blocks of Archean crust, so Phanerozoic mineral deposits in this region may be produced, at least in part, from recycled Archean gold. Future mineral exploration to the east may yield large gold tonnages. ?? 2008 Geological Society of America.

Flow of ultra-hot Precambrian orogens and the making of crustal layering in Phanerozoic orogenic plateaux

NASA Astrophysics Data System (ADS)

Chardon, Dominique; Gapais, Denis; Cagnard, Florence; Jayananda, Mudlappa; Peucat, Jean-Jacques

2010-05-01

Reassessment of structural / metamorphic properties of ultra-hot Precambrian orogens and shortening of model weak lithospheres support a syn-convergence flow mode on an orogen scale, with a large component of horizontal finite elongation parallel to the orogen. This orogen-scale flow mode combines distributed shortening, gravity-driven flow, lateral escape, and three-dimensional mass redistribution of buried supracrustal rocks, magmas and migmatites in a thick fluid lower crust. This combination preserves a nearly flat surface and Moho. The upper crust maintains a nearly constant thickness by real-time erosion and near-field clastic sedimentation and by ablation at its base by burial of pop-downs into the lower crust. Steady state regime of these orogens is allowed by activation of an attachment layer that maintains kinematic compatibility between the thin and dominantly plastic upper crust and a thick "water bed" of lower crust. Because very thin lithospheres of orogenic plateaux and Precambrian hot orogens have similar thermomechanical structures, bulk orogenic flow comparable to that governing Precambrian hot orogens should actually operate through today's orogenic plateaux as well. Thus, syn-convergence flow fabrics documented on exposed crustal sections of ancient hot orogens that have not undergone collapse may be used to infer the nature of flow fabrics that are imaged by geophysical techniques beneath orogenic plateaux. We provide a detailed geological perspective on syn-convergence crustal flow in relation to magma emplacement and partial melting on a wide oblique crustal transition of the Neoarchean ultra-hot orogen of Southern India. We document sub-horizontal bulk longitudinal flow of the partially molten lower crust over a protracted period of 60 Ma. Bulk flow results from the interplay of (1) pervasive longitudinal transtensional flow of the partially molten crust, (2) longitudinal coaxial flow on flat fabrics in early plutons, (3) distributed, orogen-normal shortening, (4) emplacement of late prolate shape plutons in the direction of flow, and (5) late, conjugate strike-slip shearing. The macroscopic- to regional scale tectonoplutonic pattern produced by longitudinal flow forms a flat composite anisotropy throughout the lower crust. In the light of GPS data, these results suggest that bulk longitudinal flow accounts for observed deformation of the Tibetan plateau as well as for its seismic structure. This flow mode may be preferred to lateral, east-directed channel flow because it combines both lateral gravity-driven thinning and distributed, orogen-normal shortening of the crust. These results further suggest that lower crustal seismic reflectivity in orogenic belts may not necessarily images fabrics produced by extensional tectonics, as commonly thought, but crustal layering produced by syn-convergence lateral flow.

The Tanami deep seismic reflection experiment: An insight into gold mineralization and Paleoproterozoic collision in the North Australian Craton

NASA Astrophysics Data System (ADS)

Goleby, Bruce R.; Huston, David L.; Lyons, Patrick; Vandenberg, Leon; Bagas, Leon; Davies, Brett M.; Jones, Leonie E. A.; Gebre-Mariam, Musie; Johnson, Wade; Smith, Tim; English, Luc

2009-07-01

Imaging of a major collision zone between the Tanami region and Aileron Province of the Arunta Orogen in Northern Australia, and recognition that several of the major gold deposits within the Tanami region are within near-surface antiformal stacks or uplifted and exhumed crustal sections associated with major crustal-penetrating shear zones, are fundamental results from the 2005 Tanami Seismic Collaborative Research Project. The suture, which is interpreted to have resulted from collision, separates the northwest-dipping structural grain of the Aileron Province crust in the south from the southeast-dipping structural grain of the Tanami crust in the northwest. The collision between the Tanami region and the Aileron Province is interpreted to have occurred prior to ca. 1840 Ma. The correlation between the surface extension of crustal-penetrating shear zones that extend to the Moho boundary and the locations of known gold-rich mineral fields is significant and has implications for minerals explorers within the Tanami region, and elsewhere. In the near-surface, where the crustal-penetrating structures cut relatively shallow upper crustal Tanami Group rocks, there is a significant increase in the degree of local deformation and results in through-going thrust faults, associated pop-up structures, ramp anticlines and antiformal stacking. All known ore deposits appear to be located within these more complexly deformed zones and therefore have a direct association with larger-scale structures.

Constraining the location of the Archean--Proterozoic suture in the Great Basin based on magnetotelluric soundings

USGS Publications Warehouse

Rodriguez, Brian D.; Sampson, Jay A.

2012-01-01

It is important to understand whether major mining districts in north-central Nevada are underlain by Archean crust, known to contain major orogenic gold deposits, or, alternatively, by accreted crust of the Paleoproterozoic Mojave province. Determining the location and orientation of the Archean-Proterozoic suture zone between the Archean crust and Mojave province is also critical because it may influence subsequent patterns of sedimentation, deformation, magmatism, and hydrothermal activity. In the Great Basin, the attitude of the suture zone is unknown because it is concealed below cover. A regional magnetotelluric sounding profile along the Utah-Nevada State line reveals a deeply penetrating, broad electrical conductor that may be the Archean-Proterozoic suture zone in the northwest corner of Utah. This major crustal conductor's strike direction is northwest, where it broadens to about 80 km wide below about 3-km depth. These results suggest that the southwestern limit of intact Archean crust in this part of the Great Basin is farther north than previously reported. These results also suggest that the major gold belts in north-central Nevada are located over the Paleoproterozoic Mojave province, and the Archean terrain lies northeast in the northwest corner of Utah. Rifted Archean crust segments south and west of the suture suggest that future mineral exploration northeast of current mineral trends may yield additional gold deposits.

Magmatic-vapor expansion and the formation of high-sulfidation gold deposits: Structural controls on hydrothermal alteration and ore mineralization

USGS Publications Warehouse

Berger, Byron R.; Henley, Richard W.

2011-01-01

High-sulfidation copper–gold lode deposits such as Chinkuashih, Taiwan, Lepanto, Philippines, and Goldfield, Nevada, formed within 1500 m of the paleosurface in volcanic terranes. All underwent an early stage of extensive advanced argillic silica–alunite alteration followed by an abrupt change to spatially much more restricted stages of fracture-controlled sulfide–sulfosalt mineral assemblages and gold–silver mineralization. The alteration as well as ore mineralization stages of these deposits were controlled by the dynamics and history of syn-hydrothermal faulting.At the Sulfate Stage, aggressive advanced argillic alteration and silicification were consequent on the in situ formation of acidic condensate from magmatic vapor as it expanded through secondary fracture networks alongside active faults. The reduction of permeability at this stage due to alteration decreased fluid flow to the surface, and progressively developed a barrier between magmatic-vapor expansion constrained by the active faults and peripheral hydrothermal activity dominated by hot-water flow. In conjunction with the increased rock strength resulting from alteration, subsequent fault-slip inversion in response to an increase in compressional stress generated new, highly permeable fractures localized by the embrittled, altered rock. The new fractures focused magmatic-vapor expansion with much lower heat loss so that condensation occurred. Sulfide Stage sulfosalt, sulfide, and gold–silver deposition then resulted from destabilization of vapor phase metal species due to vapor decompression through the new fracture array. The switch from sulfate to sulfide assemblages is, therefore, a logical consequence of changes in structural permeability due to the coupling of alteration and fracture dynamics rather than to changes in the chemistry of the fluid phase at its magmatic source.

Erosional Reduction of an Orogenic Wedge: Structural Response to Neogene Climate Change within the St. Elias Orogen, Alaska

NASA Astrophysics Data System (ADS)

Berger, A. L.; Spotila, J. A.; Chapman, J. B.; Pavlis, T. L.; Enkelmann, E.; Buscher, J. T.

2007-12-01

The kinematics and architecture of orogenic systems may be heavily influenced by climate, but little research has focused on the long term effects of glacial erosion on orogenesis. Apatite and zircon (U-Th)/He thermochronometry on >75 bedrock samples across the St. Elias orogen, one of the best examples of a glaciated orogenic wedge, is the basis for a new kinematic model and demonstrates an association between glacial denudation and orogenic architecture. The spatial pattern of low temperature cooling indicates that exhumation and deformation are focused within a thin-skinned fold and thrust belt on the windward flank, whereas the leeward flank of the orogen functions as a deformational backstop. A previously unrecognized structure beneath the Bagley ice field must separate these domains with south-side-up motion. We propose this structure is a backthrust making the orogen doubly-vergent. Suggestive of accelerated backthrust motion in response to climate change, cooling rates within the hanging wall block and across the entire windward flank of the orogen accelerated ten-fold coeval with enhanced glaciation. As backthrust motion increased, glacial unroofing also coincided with a regional shift in deformation away from prominent forethrusts including the North American-Yakutat terrane suture (Chugach St. Elias fault) and the seaward deformation front (Pamplona zone). Across the windward flank of the orogen, exhumation, at rates of up to 5 mm/yr, is focused within a narrow zone, where the glacial equilibrium line altitude (ELA) intersects the orogenic wedge. This zone of rapid exhumation, not present prior to the onset of enhanced glaciation, cuts across the structural trend of the orogen and is more narrowly focused than orographic precipitation. Accelerated denudation at the ELA thus appears to have redistributed strain along a series of forethrusts that lie at the zone of heaviest glacial flux, while the backthrust progressively truncates the southward-vergent forethrusts. In a cause and effect response, the expansion of glaciers therefore appears to have resulted in a narrowing of the orogenic wedge due to increased backthrust motion and a landward propagation of deformation in order to preserve topographic slope. This focusing of long- term glacial erosion and deformation at the ELA matches predictions from analytical models of orogenic wedges (i.e. Tomkin and Braun, 2002) and implies a high degree of coupling between climate and tectonics in this glacially-dominated orogen.

Geological and geochemical implications of the genesis of the Qolqoleh orogenic gold mineralisation, Kurdistan Province (Iran)

NASA Astrophysics Data System (ADS)

Taghipour, Batoul; Ahmadnejad, Farhad

2015-03-01

The Qolqoleh gold deposit is located in the northwestern part of the Sanandaj-Sirjan Zone (SSZ), within the NE-SW trending Qolqoleh shear zone. Oligocene granitoids, Cretaceous meta-limestones, schists and metavolcanics are the main lithological units. Chondrite-normalised REE patterns of the ore-hosting metavolcanics indicate REE enrichment relative to hanging wall (chlorite-sericite schist) and footwall (meta-limestone) rocks. The pattern also reflects an enrichment in LREE relative to HREE. It seems that the LREE enrichment is related to the circulation of SO42- and CO2-bearing fluids and regional metamorphism in the Qolqoleh shear zone. Both positive and negative Eu anomalies are observed in shear-zone metavolcanics. These anomalies are related to the degree of plagioclase alteration during gold mineralisation and hydrothermal alteration. In progressing from a metavolcanic protomylonite to an ultramylonite, significant changes occurred in the major/trace element and REE concentration. Utilising an Al-Fe-Ti isocon for the ore-hosting metavolcanics shows that Sc, Y, K, U, P, and M-HREE (except Eu) are relatively unchanged; S, As, Ag, Au, Ca, LOI, Rb and LREE are enriched, and Sr, Ba, Eu, Cr, Co and Ni decrease with an increasing degree of deformation. Based on geochemical features and comparison with other well-known shear zones in the world, the study area is best classified as an Isovolume-Gain (IVG) type shear zone and orogenic type gold mineralisation. Based on the number of phases observed at room temperature and their microthermometric behaviour, three fluid inclusion types have been recognised in quartz-sulphide and quartz-calcite veins: Type I monophase aqueous inclusions, Type II two-phase liquid-vapour (L-V) inclusions which are subdivided into two groups based on the homogenisation temperature (Th): a) L-V inclusions with Th from 205 to 255°C and melting temperature of last ice (Tm) from -3 to -9°C. b) L-V inclusions with higher Th from 335 to 385°C and Tm from -11 to -16°C. Type III three-phase carbonic-liquid inclusions (liquid water-liquid CO2-vapour CO2) with Th of 345-385°C. The mean values of the density of ore-forming fluids, pressure and depth of mineralisation have been calculated to be 0.79-0.96 gr/cm3, 2 kbar and 7 km, respectively. The δ18Owater and δD values of the gold-bearing quartz-sulphide veins vary from 7.2‰ to 8‰ and -40.24‰ to -35.28‰, respectively, which are indicative of an isotopically heavy crustal fluid and likely little involvement of meteoric fluid. The δ18Owater values of the quartz-calcite veins have a range of -5.31‰ to -3.35‰, and the δD values of -95.65‰ to -75.31‰, which are clearly lower than those of early-stage quartz-sulphide-gold veins, and are close to the meteoric water line. Based on comparisons of the D-O isotopic systematics, the Qolqoleh ore-mineralising fluids originated from metamorphic devolatilisation of Cretaceous volcano-sedimentary piles. Devolatilisation of these units occurred either synchronously with, or postdates, the development of penetrative (ductile) structures such as shear zones and during overprinting brittle deformation

Failure of Sierra White granite under general states of stress

NASA Astrophysics Data System (ADS)

Ingraham, M. D.; Dewers, T. A.; Lee, M.; Holdman, O.; Cheung, C.; Haimson, B. C.

2017-12-01

The effect of the intermediate principal stress on the failure of Sierra White granite was investigated by performing tests under true triaxial states of stress. Tests were performed under constant Lode angle conditions with Lode angles ranging from 0 to 30°, pure shear to axisymmetric compression. Results show that the failure of Sierra White granite is heavily dependent on the intermediate principal stress which became more dramatic as the mean stress increased. An analysis of the shear bands formed at failure was performed using an associated flow rule and the Rudnicki and Rice (1975) localization criteria. The localization analysis showed excellent agreement with experimental results. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology and Engineering Solutions of Sandia LLC, a wholly owned subsidiary of Honeywell International Inc. for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-NA0003525.

A Tale of Two Orogens: Comparing Crustal Processes in the Proterozoic Trans-Hudson and Grenville Orogens, Eastern Canada

NASA Astrophysics Data System (ADS)

Darbyshire, F. A.; Bastow, I. D.; Gilligan, A.; Petrescu, L.

2016-12-01

The Precambrian core of North America is an assemblage of Archean cratons and Proterozoic orogenic belts, preserving over 3 billion years of Earth history. Here we focus on two of the largest collisional orogens, using recent and ongoing seismological studies to probe their present-day structure and tectonic history. The 1.8 Ga collision between the Western Churchill and Superior cratons, along with microcontinental and island arc terranes, formed the Trans-Hudson Orogen (THO), a collisional belt similar in scale and shape to the present-day Himalaya-Karakoram-Tibet Orogen (HKTO). In the Mesoproterozoic, a series of collisions reworked the SE margin of the Superior craton and added new material over a period of several hundred Ma, culminating in the Grenvillian orogeny and the assembly of the supercontinent Rodinia. The Grenville Orogen is thought to have been a large, hot, long-lived plateau which subsequently underwent orogenic collapse. While similar in spatial scale, the Trans-Hudson and Grenville Orogens have significantly different tectonic histories, notably in terms of longevity and tectonic evolution. Comparison of these collisional belts with each other, and with the HTKO, provide valuable insights into plate-tectonic history. Recently a number of broadband seismograph installations have allowed a detailed study of present-day crustal structure beneath the THO and the Grenville. Receiver-function and surface wave studies provide information on crustal thickness variations, bulk crustal composition and crustal heterogeneity. The crust beneath the orogens is generally thicker, more mafic and more heterogeneous than that beneath neighbouring Archean and Phanerozoic domains, with significant along-strike variability and Moho complexity. We review and interpret the new crustal structure information in the context of the tectonic processes affecting the two contrasting orogens.

Architecture, kinematics, and exhumation of a convergent orogenic wedge: A thermochronological investigation of tectonic-climatic interactions within the central St. Elias orogen, Alaska

NASA Astrophysics Data System (ADS)

Berger, Aaron L.; Spotila, James A.; Chapman, James B.; Pavlis, Terry L.; Enkelmann, Eva; Ruppert, Natalia A.; Buscher, Jamie T.

2008-06-01

The kinematics and architecture of orogenic systems along the leading edges of accreting terranes may be heavily influenced by climate, but little research has been devoted to the long-term effects of glacial erosion on orogenesis. Here we use low-temperature apatite and zircon (U-Th)/He and fission-track thermochronometry, along with subsidiary structural relationships and seismicity, to develop a new architectural model of the St. Elias orogen in southern Alaska, which is one of the best examples of a glaciated orogenic wedge worldwide. These data illustrate that the orogen consists of a deformational backstop on the leeward flank and a rapidly deforming and eroding, thin-skinned fold and thrust belt on the windward flank. A structure beneath the Bagley ice field separates these distinct deformational domains, which we propose is a backthrust that makes the orogen doubly-vergent. Thermochronometry within the orogenic wedge suggests that denudation and deformation are strongly influenced by glacial erosion. Long-term exhumation, at rates of up to 4 mm/yr, is concentrated within a narrow zone along the windward flank, where glacier equilibrium lines intersect the orogenic wedge. The onset of enhanced glaciation also coincided with a marked acceleration in exhumation across the orogenic wedge, accelerated backthrust motion, and a major shift in deformation away from the North American-Yakutat terrane suture (Chugach St. Elias fault). We propose that accelerated glacial erosion forced the redistribution of strain along the backthrust and an en echelon array of forethrusts that lie beneath the zone of heaviest glaciation, which in turn are systematically truncated by the backthrust. This focusing of deformation matches predictions from analytical models of orogenic wedges and implies a high degree of coupling between climate and tectonics in this glacially-dominated orogen.

Models of grades and tonnages of some lode tin deposits

USGS Publications Warehouse

Menzie, W.D.; Reed, B.L.; Singer, Donald A.

1988-01-01

Descriptive and grade/tonnage models have recently been built for many types of deposits. Such models consist of descriptions of mineralogy, host rocks, ore textures, controls, alteration, geochemical signatures, age, and tectonic settings, together with statistical models of grades, tonnages, and contained metal of deposits of each type. The models are used to identify areas that may contain undiscovered deposits of given types, to convey to non-geologists an idea of the importance of such deposits, and to test and refine classifications of mineral deposits.Descriptive and grade/tonnage models have recently been built for five types of primary tin deposits: rhyolite-hosted such as in Mexico; hydrothermal lodes such as in Cornwall, England, and the Herberton district, Queensland; replacement (or exhalative?) such as Renison Bell, Tasmania; skarn such as at Lost River, Alaska; and greisen such as in the Erzgebirge. Analyses of frequency distributions of tonnage, contained metal, tin grades and the relationships between these variables show that the deposits fall into four well-defined domains that have definite geological characteristics. Rhyolite-hosted, or Mexican, deposits contain a median of 4 t of tin and have a median grade of 0.4% Sn. Hydrothermal lode deposits have the highest grades. Half of such deposits have grades over 1.0% Sn, and the majority contain more than 1,000 t Sn. Large hydrothermal vein deposits contain more than 50,000 t Sn. Replacement (or exhalative?) deposits contain the largest amount of tin (median = 40,000 t). They are only of slightly lower grade (median = 0.80% Sn) than the hydrothermal lodes. Greisen or stockwork deposits have larger tonnages than replacement deposits, but contain less tin (median = 25,000 t).They are also of much lower grade (median = 0.3% Sn). Though grades and tonnages are available for only four skarn deposits, they appear to be more like greisen deposits than replacement deposits when compared using grades, tonnage and contained tin.Although these individual models of primary tin deposits must be regarded as preliminary because of the relatively small number of deposits upon which they are built, they clearly demonstrate differences among types and provide basic information that can be useful in making decisions about exploration strategy, land classification, and tin supply.

Tectonic mode switches and the nature of orogenesis

NASA Astrophysics Data System (ADS)

Lister, Gordon; Forster, Marnie

2009-12-01

The birth and death of many mountain belts occurs in lithosphere that over-rides major subduction zones. Here the tectonic mode (shortening versus extension) can abruptly switch, even during continuous and otherwise smooth convergence. If the hinge line of the foundering slab rapidly retreats (i.e. rolls back), the foundering slab creates a gravitational potential well into which the orogen collapses. This motion, coupled with stress guides, can "pull" the orogen apart. A slowing of roll-back (or of hinge retreat) means that the subduction flexure may subsequently begin to be "pushed back" or be "pushed over" by the advancing orogen. The consequence of such changes in relative motion is that orogenic belts are affected by abrupt tectonic mode switches. The change from "push" to "pull" leads to a sudden change from horizontal extension to horizontal shortening, potentially throughout the entire mass of the orogenic lithosphere that over-rides the subducting slab. The sequencing of these tectonic mode switches affects the thermal evolution of the orogen, and thus fundamentally determines the nature of orogenesis. This insight led to us to our quite different views as to how orogens work. It is evident that orogens affected by abrupt "push-pull" mode switches are characterized by high-pressure metamorphism, whereas orogens affected by abrupt "pull-push" mode switches are characterized by high-temperature metamorphism, magmatism and anatexis.

View of Feature 2, the remains of the Geology/Change Room, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

View of Feature 2, the remains of the Geology/Change Room, view to the southeast - Orphan Lode Mine, North of West Rim Road between Powell Point and Maricopa Point, South Rim, Grand Canyon Village, Coconino County, AZ

Metallogeny of precious and base metal mineralization in the Murchison Greenstone Belt, South Africa: indications from U-Pb and Pb-Pb geochronology

NASA Astrophysics Data System (ADS)

Jaguin, J.; Poujol, M.; Boulvais, P.; Robb, L. J.; Paquette, J. L.

2012-10-01

The 3.09 to 2.97 Ga Murchison Greenstone Belt is an important metallotect in the northern Kaapvaal Craton (South Africa), hosting several precious and base metal deposits. Central to the metallotect is the Antimony Line, striking ENE for over 35 km, which hosts a series of structurally controlled Sb-Au deposits. To the north of the Antimony Line, hosted within felsic volcanic rocks, is the Copper-Zinc Line where a series of small, ca. 2.97 Ga Cu-Zn volcanogenic massive sulfide (VMS)-type deposits occur. New data are provided for the Malati Pump gold mine, located at the eastern end of the Antimony Line. Crystallizations of a granodiorite in the Malati Pump Mine and of the Baderoukwe granodiorite are dated at 2,964 ± 7 and 2,970 ± 7 Ma, respectively (zircon U-Pb), while pyrite associated with gold mineralization yielded a Pb-Pb age of 2,967 ± 48 Ma. Therefore, granodiorite emplacement, sulfide mineral deposition and gold mineralization all happened at ca. 2.97 Ga. It is, thus, suggested that the major styles of orogenic Au-Sb and the Cu-Zn VMS mineralization in the Murchison Greenstone Belt are contemporaneous and that the formation of meso- to epithermal Au-Sb mineralization at fairly shallow levels was accompanied by submarine extrusion of felsic volcanic rocks to form associated Cu-Zn VMS mineralization.

Reworked crustal of early Paleozoic WuYi Orogen revealed by receiver function data

NASA Astrophysics Data System (ADS)

Wei, Y.; Duan, Y.; Tian, X.; Zhao, Y.

2017-12-01

Intraplate orogenic belt, which occurs at the rigid and undeformable plate interiors, is a distinct new type of orogen rather than an interplate or plate marginal orogenic belt, whose deformation occurs exclusively at plate margins. Therefore, intraplate orogenic belts are the most obvious exception to the plate-tectonic paradigm, they are uncommon in Earth's history. The early Paleozoic Wuyi orogen in South China is one of the few examples of intraplate orogen, and is a key to understanding the process of intraplate orogenesis and global early Paleozoic geodynamics. In this study, we select teleseismic records from 45 mobile linear seismic stations deployed in Wuyi Mountain and 58 permanent stations setting in Jiangxi and Fujian provinces, from January 2011 to December 2012, and calculate the crustal thickness and average crustal Vp/Vs ratio using the H-κ stacking method. The main results include the following: 1) the crustal average Poission's ratio shows an increase tendency from land to sea, the interior of Wuyi orogen belt with an low ration less than 0.23, and the coastline with high ration which is up to 0.28, which indicate a very heterogeneous crustal structure and composition in Wuyi orogen and coast belt. 2) the crustal thickness ranges 28-34 km and shows a tendency of thinning from inland to coast in the region of SE China margin, which maight mean the eastern Eurasia lithospheric is extension and thinning induced by the subducted paleo-Pacific slab. To conclusion, we assume that Wuyi orogen experienced upper crustal thickening, lower crust and lithosphere delamination during the early Paleozoic orogeny, and lithosphere extension in Mesozoic. This research is founded by the Natural Science Foundation of China (41174052 and 41604048).

Continuation of the New England Orogen, Australia, beneath the Queensland Plateau and Lord Howe rise

USGS Publications Warehouse

Mortimer, N.; Hauff, F.; Calvert, A.T.

2008-01-01

Greywacke, argillite, greyschist and hypabyssal igneous rocks have been obtained from an Ocean Drilling Program core on the Queensland Plateau and from xenoliths in a volcanic breccia dredged from the crest of the Lord Howe Rise. Low to intermediate detrital quartz contents, 260-240 Ma K-Ar ages, and only moderately radiogenic Sr and Nd isotope compositions, suggest a correlation with the New England Orogen of eastern Australia, rather than with Australia's Lachlan Orogen or other adjacent geological provinces. Our results indicate that the New England Orogen terranes continue towards New Zealand at least as far as the southern Lord Howe Rise. The projected offshore boundaries of the major east Australian orogens are now known with more confidence, and do not appear to require any major cross-orogen offsets.

43 CFR 3862.8 - Patents for mining claims.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 43 Public Lands: Interior 2 2011-10-01 2011-10-01 false Patents for mining claims. 3862.8 Section... MANAGEMENT, DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) MINERAL PATENT APPLICATIONS Lode Mining Claim Patent Applications § 3862.8 Patents for mining claims. ...

43 CFR 3862.8 - Patents for mining claims.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 43 Public Lands: Interior 2 2014-10-01 2014-10-01 false Patents for mining claims. 3862.8 Section... MANAGEMENT, DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) MINERAL PATENT APPLICATIONS Lode Mining Claim Patent Applications § 3862.8 Patents for mining claims. ...

43 CFR 3862.8 - Patents for mining claims.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 43 Public Lands: Interior 2 2013-10-01 2013-10-01 false Patents for mining claims. 3862.8 Section... MANAGEMENT, DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) MINERAL PATENT APPLICATIONS Lode Mining Claim Patent Applications § 3862.8 Patents for mining claims. ...

43 CFR 3862.8 - Patents for mining claims.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 43 Public Lands: Interior 2 2012-10-01 2012-10-01 false Patents for mining claims. 3862.8 Section... MANAGEMENT, DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) MINERAL PATENT APPLICATIONS Lode Mining Claim Patent Applications § 3862.8 Patents for mining claims. ...

Geology and metallogeny of the Ar Rayn terrane, eastern Arabian shield: Evolution of a Neoproterozoic continental-margin arc during assembly of Gondwana within the East African orogen

USGS Publications Warehouse

Doebrich, J.L.; Al-Jehani, A. M.; Siddiqui, A.A.; Hayes, T.S.; Wooden, J.L.; Johnson, P.R.

2007-01-01

The Neoproterozoic Ar Rayn terrane is exposed along the eastern margin of the Arabian shield. The terrane is bounded on the west by the Ad Dawadimi terrane across the Al Amar fault zone (AAF), and is nonconformably overlain on the east by Phanerozoic sedimentary rocks. The terrane is composed of a magmatic arc complex and syn- to post-orogenic intrusions. The layered rocks of the arc, the Al Amar group (>689 Ma to ???625 Ma), consist of tholeiitic to calc-alkaline basaltic to rhyolitic volcanic and volcaniclastic rocks with subordinate tuffaceous sedimentary rocks and carbonates, and are divided into an eastern and western sequence. Plutonic rocks of the terrane form three distinct lithogeochemical groups: (1) low-Al trondhjemite-tonalite-granodiorite (TTG) of arc affinity (632-616 Ma) in the western part of the terrane, (2) high-Al TTG/adakite of arc affinity (689-617 Ma) in the central and eastern part of the terrane, and (3) syn- to post-orogenic alkali granite (607-583 Ma). West-dipping subduction along a trench east of the terrane is inferred from high-Al TTG/adakite emplaced east of low-Al TTG. The Ar Rayn terrane contains significant resources in epithermal Au-Ag-Zn-Cu-barite, enigmatic stratiform volcanic-hosted Khnaiguiyah-type Zn-Cu-Fe-Mn, and orogenic Au vein deposits, and the potential for significant resources in Fe-oxide Cu-Au (IOCG), and porphyry Cu deposits. Khnaiguiyah-type deposits formed before or during early deformation of the Al Amar group eastern sequence. Epithermal and porphyry deposits formed proximal to volcanic centers in Al Amar group western sequence. IOCG deposits are largely structurally controlled and hosted by group-1 intrusions and Al Amar group volcanic rocks in the western part of the terrane. Orogenic gold veins are largely associated with north-striking faults, particularly in and near the AAF, and are presumably related to amalgamation of the Ar Rayn and Ad Dawadimi terranes. Geologic, structural, and metallogenic characteristics of the Ar Rayn terrane are analogous to the Andean continental margin of Chile, with opposite subduction polarity. The Ar Rayn terrane represents a continental margin arc that lay above a west-dipping subduction zone along a continental block represented by the Afif composite terrane. The concentration of epithermal, porphyry Cu and IOCG mineral systems, of central arc affiliation, along the AAF suggests that the AAF is not an ophiolitic suture zone, but originated as a major intra-arc fault that localized magmatism and mineralization. West-directed oblique subduction and ultimate collision with a land mass from the east (East Gondwana?) resulted in major transcurrent displacement along the AAF, bringing the eastern part of the arc terrane to its present exposed position, juxtaposed across the AAF against a back-arc basin assemblage represented by the Abt schist of the Ad Dawadimi terrane. Our findings indicate that arc formation and accretionary processes in the Arabian shield were still ongoing into the latest Neoproterozoic (Ediacaran), to about 620-600 Ma, and lead us to conclude that evolution of the Ar Rayn terrane (arc formation, accretion, syn- to postorogenic plutonism) defines a final stage of assembly of the Gondwana supercontinent along the northeastern margin of the East African orogen. ?? 2007 Elsevier B.V. All rights reserved.

Lithologically controlled invisible gold, Yukon, Canada

NASA Astrophysics Data System (ADS)

MacKenzie, Doug; Craw, Dave; Finnigan, Craig

2015-02-01

The newly discovered Cretaceous Coffee orogenic gold deposit (>4 Moz resource) consists of an extensive oxidised zone developed on primary sulphidic rock. The primary mineralised rock is characterised by invisible gold in arsenian pyrite that has replaced biotite in selected host rocks. The deposit has a cryptic surface expression and is an example of an extremely subtle exploration target. Hydrothermal emplacement was controlled by extensional fractures, with breccias, but most mineralisation was focused on biotite-bearing granitic gneiss, metasedimentary gneisses, and younger biotite granite. Fine-grained (<0.1 mm) arsenian pyrite replaced biotite along mineral cleavage planes and followed biotite-rich metamorphic and post-metamorphic structural fabrics. Arsenian pyrite also formed overgrowths on earlier coarse-grained (up to 2 mm) barren hydrothermal pyrite. Arsenian pyrite is concentrically zoned on the 1-10-μm scale with respect to As, Sb, and Au contents and typically contains ˜5 wt% As, ˜500 mg/kg Sb, and ˜500 mg/kg Au, in solid solution. Biotite replacement was accompanied by sericitisation, silicification, and ankerite impregnation. Hydrothermal alteration involved dilution and localised depletion of K, Na, and Al in silicified host rocks, but most Ca, Mg, and Fe concentrations remained broadly constant. Magnesium-rich ultramafic host rocks were only weakly mineralised with auriferous arsenian pyrite and have fuchsite and magnesite alteration. Near-surface oxidation has liberated nanoparticulate and microparticulate supergene gold, which remains essentially invisible. Varying degrees of oxidation extend as deep as 250 m below the present subdued topographic surface, well beyond the present vadose zone, and this deep oxidation may have occurred during post-mineralisation uplift and erosion in the Cretaceous. Oxidation has leached some As from the surficial mineralised rocks, decreasing the geochemical signal, which is also obscured by the localised presence of high background As (up to 100 mg/kg) in metasedimentary quartzites in the region. Antimony provides more reliable soil anomalies than As, but most Sb anomalies are <100 mg/kg. The persistence of invisible gold into the extensive supergene zone, with little gold particle size enhancement, has ensured that no placer deposits have formed in nearby streams, further restricting the surface footprint and Au dispersal halo of this subtle exploration target.

Metallogenetic systems associated with granitoid magmatism in the Amazonian Craton: An overview of the present level of understanding and exploration significance

NASA Astrophysics Data System (ADS)

Bettencourt, Jorge Silva; Juliani, Caetano; Xavier, Roberto P.; Monteiro, Lena V. S.; Bastos Neto, Artur C.; Klein, Evandro L.; Assis, Rafael R.; Leite, Washington Barbosa, Jr.; Moreto, Carolina P. N.; Fernandes, Carlos Marcello Dias; Pereira, Vitor Paulo

2016-07-01

The Amazonian Craton hosts world-class metallogenic provinces with a wide range of styles of primary precious, rare, base metal, and placer deposits. This paper provides a synthesis of the geological database with regard to granitoid magmatic suites, spatio temporal distribution, tectonic settings, and the nature of selected mineral deposits. The Archean Carajás Mineral Province comprises greenstone belts (3.04-2.97 Ga), metavolcanic-sedimentary units (2.76-2.74 Ga), granitoids (3.07-2.84 Ga) formed in a magmatic arc and syn-collisional setting, post-orogenic A2-type granites as well as gabbros (ca. 2.74 Ga), and anorogenic granites (1.88 Ga). Archean iron oxide-Cu-Au (IOCG) deposits were synchronous or later than bimodal magmatism (2.74-2.70 Ga). Paleoproterozoic IOCG deposits, emplaced at shallow-crustal levels, are enriched with Nb-Y-Sn-Be-U. The latter, as well as Sn-W and Au-EGP deposits are coeval with ca. 1.88 Ga A2-type granites. The Tapajós Mineral Province includes a low-grade meta-volcano-sedimentary sequence (2.01 Ga), tonalites to granites (2.0-1.87 Ga), two calc-alkaline volcanic sequences (2.0-1.95 Ga to 1.89-1.87 Ga) and A-type rhyolites and granites (1.88 Ga). The calc-alkaline volcanic rocks host epithermal Au and base metal mineralization, whereas Cu-Au and Cu-Mo ± Au porphyry-type mineralization is associated with sub-volcanic felsic rocks, formed in two continental magmatic arcs related to an accretionary event, resulting from an Andean-type northwards subduction. The Alta Floresta Gold Province consists of Paleoproterozoic plutono-volcanic sequences (1.98-1.75 Ga), generated in ocean-ocean orogenies. Disseminated and vein-type Au ± Cu and Au + base metal deposits are hosted by calc-alkaline I-type granitic intrusions (1.98 Ga, 1.90 Ga, and 1.87 Ga) and quartz-feldspar porphyries (ca. 1.77 Ga). Timing of the gold deposits has been constrained between 1.78 Ga and 1.77 Ga and linked to post-collisional Juruena arc felsic magmatism (e.g., Colíder and Teles Pires suites). The Transamazonas Province corresponds to a N-S-trending orogenic belt, consolidated during the Transamazonian cycle (2.26-1.95 Ga), comprising the Lourenço, Amapá, Carecuru, Bacajá, and Santana do Araguaia tectonic domains. They show a protracted tectonic evolution, and are host to the pre-, syn-, and post-orogenic to anorogenic granitic magmatism. Gold mineralization associated with magmatic events is still unclear. Greisen and pegmatite Sn-Nb-Ta deposits are related to 1.84 to 1.75 Ga late-orogenic to anorogenic A-type granites. The Pitinga Tin Province includes the Madeira Sn-Nb-Ta-F deposit, Sn-greisens and Sn-episyenites. These are associated with A-type granites of the Madeira Suite (1.84-1.82 Ga), which occur within a cauldron complex (Iricoumé Group). The A-type magmatism evolved from a post-collisional extension, towards a within-plate setting. The hydrothermal processes (400 °C-100 °C) resulted in albitization and formation of disseminated cryolite, pyrochlore columbitization, and formation of a massive cryolite deposit in the core of the Madeira deposit. The Rondônia Tin Province hosts rare-metal (Ta, Nb, Be) and Sn-W mineralization, which is associated with the São Lourenço-Caripunas (1.31-1.30 Ga), related to the post-collisional stage of the Rondônia San Ignácio Province (1.56-1.30 Ga), and to the Santa Clara (1.08-1.07 Ga) and Younger Granites of Rondônia (0.99-0.97 Ga) A-type granites. The latter are linked to the evolution of the Sunsás-Aguapeí Province (1.20-0.95 Ga). Rare-metal polymetallic deposits are associated with late stage peraluminous granites, mainly as greisen, quartz vein, and pegmatite types.

Orogen styles in the East African Orogen: A review of the Neoproterozoic to Cambrian tectonic evolution.

PubMed

Fritz, H; Abdelsalam, M; Ali, K A; Bingen, B; Collins, A S; Fowler, A R; Ghebreab, W; Hauzenberger, C A; Johnson, P R; Kusky, T M; Macey, P; Muhongo, S; Stern, R J; Viola, G

2013-10-01

The East African Orogen, extending from southern Israel, Sinai and Jordan in the north to Mozambique and Madagascar in the south, is the world́s largest Neoproterozoic to Cambrian orogenic complex. It comprises a collage of individual oceanic domains and continental fragments between the Archean Sahara-Congo-Kalahari Cratons in the west and Neoproterozoic India in the east. Orogen consolidation was achieved during distinct phases of orogeny between ∼850 and 550 Ma. The northern part of the orogen, the Arabian-Nubian Shield, is predominantly juvenile Neoproterozoic crust that formed in and adjacent to the Mozambique Ocean. The ocean closed during a protracted period of island-arc and microcontinent accretion between ∼850 and 620 Ma. To the south of the Arabian Nubian Shield, the Eastern Granulite-Cabo Delgado Nappe Complex of southern Kenya, Tanzania and Mozambique was an extended crust that formed adjacent to theMozambique Ocean and experienced a ∼650-620 Ma granulite-facies metamorphism. Completion of the nappe assembly around 620 Ma is defined as the East African Orogeny and was related to closure of the Mozambique Ocean. Oceans persisted after 620 Ma between East Antarctica, India, southern parts of the Congo-Tanzania-Bangweulu Cratons and the Zimbabwe-Kalahari Craton. They closed during the ∼600-500 Ma Kuungan or Malagasy Orogeny, a tectonothermal event that affected large portions of southern Tanzania, Zambia, Malawi, Mozambique, Madagascar and Antarctica. The East African and Kuungan Orogenies were followed by phases of post-orogenic extension. Early ∼600-550 Ma extension is recorded in the Arabian-Nubian Shield and the Eastern Granulite-Cabo Delgado Nappe Complex. Later ∼550-480 Ma extension affected Mozambique and southern Madagascar. Both extension phases, although diachronous,are interpreted as the result of lithospheric delamination. Along the strike of the East African Orogen, different geodynamic settings resulted in the evolution of distinctly different orogen styles. The Arabian-Nubian Shield is an accretion-type orogen comprising a stack of thin-skinned nappes resulting from the oblique convergence of bounding plates. The Eastern Granulite-Cabo Delgado Nappe Complex is interpreted as a hot- to ultra-hot orogen that evolved from a formerly extended crust. Low viscosity lower crust resisted one-sided subduction, instead a sagduction-type orogen developed. The regions of Tanzania and Madagascar affected by the Kuungan Orogeny are considered a Himalayan-type orogen composed of partly doubly thickened crust.

Orogen styles in the East African Orogen: A review of the Neoproterozoic to Cambrian tectonic evolution☆

PubMed Central

Fritz, H.; Abdelsalam, M.; Ali, K.A.; Bingen, B.; Collins, A.S.; Fowler, A.R.; Ghebreab, W.; Hauzenberger, C.A.; Johnson, P.R.; Kusky, T.M.; Macey, P.; Muhongo, S.; Stern, R.J.; Viola, G.

2013-01-01

The East African Orogen, extending from southern Israel, Sinai and Jordan in the north to Mozambique and Madagascar in the south, is the world́s largest Neoproterozoic to Cambrian orogenic complex. It comprises a collage of individual oceanic domains and continental fragments between the Archean Sahara–Congo–Kalahari Cratons in the west and Neoproterozoic India in the east. Orogen consolidation was achieved during distinct phases of orogeny between ∼850 and 550 Ma. The northern part of the orogen, the Arabian–Nubian Shield, is predominantly juvenile Neoproterozoic crust that formed in and adjacent to the Mozambique Ocean. The ocean closed during a protracted period of island-arc and microcontinent accretion between ∼850 and 620 Ma. To the south of the Arabian Nubian Shield, the Eastern Granulite–Cabo Delgado Nappe Complex of southern Kenya, Tanzania and Mozambique was an extended crust that formed adjacent to theMozambique Ocean and experienced a ∼650–620 Ma granulite-facies metamorphism. Completion of the nappe assembly around 620 Ma is defined as the East African Orogeny and was related to closure of the Mozambique Ocean. Oceans persisted after 620 Ma between East Antarctica, India, southern parts of the Congo–Tanzania–Bangweulu Cratons and the Zimbabwe–Kalahari Craton. They closed during the ∼600–500 Ma Kuungan or Malagasy Orogeny, a tectonothermal event that affected large portions of southern Tanzania, Zambia, Malawi, Mozambique, Madagascar and Antarctica. The East African and Kuungan Orogenies were followed by phases of post-orogenic extension. Early ∼600–550 Ma extension is recorded in the Arabian–Nubian Shield and the Eastern Granulite–Cabo Delgado Nappe Complex. Later ∼550–480 Ma extension affected Mozambique and southern Madagascar. Both extension phases, although diachronous,are interpreted as the result of lithospheric delamination. Along the strike of the East African Orogen, different geodynamic settings resulted in the evolution of distinctly different orogen styles. The Arabian–Nubian Shield is an accretion-type orogen comprising a stack of thin-skinned nappes resulting from the oblique convergence of bounding plates. The Eastern Granulite–Cabo Delgado Nappe Complex is interpreted as a hot- to ultra-hot orogen that evolved from a formerly extended crust. Low viscosity lower crust resisted one-sided subduction, instead a sagduction-type orogen developed. The regions of Tanzania and Madagascar affected by the Kuungan Orogeny are considered a Himalayan-type orogen composed of partly doubly thickened crust. PMID:27065752

Orogen styles in the East African Orogen: A review of the Neoproterozoic to Cambrian tectonic evolution

NASA Astrophysics Data System (ADS)

Fritz, H.; Abdelsalam, M.; Ali, K. A.; Bingen, B.; Collins, A. S.; Fowler, A. R.; Ghebreab, W.; Hauzenberger, C. A.; Johnson, P. R.; Kusky, T. M.; Macey, P.; Muhongo, S.; Stern, R. J.; Viola, G.

2013-10-01

The East African Orogen, extending from southern Israel, Sinai and Jordan in the north to Mozambique and Madagascar in the south, is the world´s largest Neoproterozoic to Cambrian orogenic complex. It comprises a collage of individual oceanic domains and continental fragments between the Archean Sahara-Congo-Kalahari Cratons in the west and Neoproterozoic India in the east. Orogen consolidation was achieved during distinct phases of orogeny between ∼850 and 550 Ma. The northern part of the orogen, the Arabian-Nubian Shield, is predominantly juvenile Neoproterozoic crust that formed in and adjacent to the Mozambique Ocean. The ocean closed during a protracted period of island-arc and microcontinent accretion between ∼850 and 620 Ma. To the south of the Arabian Nubian Shield, the Eastern Granulite-Cabo Delgado Nappe Complex of southern Kenya, Tanzania and Mozambique was an extended crust that formed adjacent to theMozambique Ocean and experienced a ∼650-620 Ma granulite-facies metamorphism. Completion of the nappe assembly around 620 Ma is defined as the East African Orogeny and was related to closure of the Mozambique Ocean. Oceans persisted after 620 Ma between East Antarctica, India, southern parts of the Congo-Tanzania-Bangweulu Cratons and the Zimbabwe-Kalahari Craton. They closed during the ∼600-500 Ma Kuungan or Malagasy Orogeny, a tectonothermal event that affected large portions of southern Tanzania, Zambia, Malawi, Mozambique, Madagascar and Antarctica. The East African and Kuungan Orogenies were followed by phases of post-orogenic extension. Early ∼600-550 Ma extension is recorded in the Arabian-Nubian Shield and the Eastern Granulite-Cabo Delgado Nappe Complex. Later ∼550-480 Ma extension affected Mozambique and southern Madagascar. Both extension phases, although diachronous,are interpreted as the result of lithospheric delamination. Along the strike of the East African Orogen, different geodynamic settings resulted in the evolution of distinctly different orogen styles. The Arabian-Nubian Shield is an accretion-type orogen comprising a stack of thin-skinned nappes resulting from the oblique convergence of bounding plates. The Eastern Granulite-Cabo Delgado Nappe Complex is interpreted as a hot- to ultra-hot orogen that evolved from a formerly extended crust. Low viscosity lower crust resisted one-sided subduction, instead a sagduction-type orogen developed. The regions of Tanzania and Madagascar affected by the Kuungan Orogeny are considered a Himalayan-type orogen composed of partly doubly thickened crust.

Publications - SR 56 | Alaska Division of Geological & Geophysical Surveys

Science.gov Websites

Minerals; Iron; Jade; Jurassic; Kanayut Conglomerate; Kayak Shale; Kuskokwim Group; Lead; Limestone; Lode ; Nickel; Nikolai Greenstone; Noatak Sandstone; Nome Group; Nuggets; Orca Group; Ordovician; Ores ; Paleozoic; Palladium; Pennsylvanian; Placer; Platinum; Platinum Group Elements; Plutonic; Plutonic Hosted

Publications - SR 53 | Alaska Division of Geological & Geophysical Surveys

Science.gov Websites

Group; Lead; Limestone; Lode; Marble; Mercury; Mesozoic; Metallurgy; Metamorphic Rocks; Mineral Pluton; Nickel; Nikolai Greenstone; Noatak Sandstone; Nome Group; Nuggets; Orca Group; Ordovician; Ores ; Paleozoic; Palladium; Pennsylvanian; Placer; Platinum; Platinum Group Elements; Plutonic; Plutonic Hosted

Publications - SR 54 | Alaska Division of Geological & Geophysical Surveys

Science.gov Websites

Minerals; Iron; Jade; Jurassic; Kanayut Conglomerate; Kayak Shale; Kuskokwim Group; Lead; Limestone; Lode ; Nickel; Nikolai Greenstone; Noatak Sandstone; Nome Group; Nuggets; Orca Group; Ordovician; Ores ; Paleozoic; Palladium; Pennsylvanian; Placer; Platinum; Platinum Group Elements; Plutonic; Plutonic Hosted

Publications - SR 57 | Alaska Division of Geological & Geophysical Surveys

Science.gov Websites

; Kanayut Conglomerate; Kayak Shale; Kuskokwim Group; Lead; Limestone; Lode; Marble; Massive Sulfides ; Noatak Sandstone; Nome Group; Nuggets; Orca Group; Ordovician; Ores; Paleozoic; Palladium; Pennsylvanian ; Placer; Platinum; Platinum Group Elements; Plutonic; Plutonic Hosted; Plutonic Rocks; Polymetallic Vein

Publications - SR 55 | Alaska Division of Geological & Geophysical Surveys

Science.gov Websites

Minerals; Iron; Jade; Jurassic; Kanayut Conglomerate; Kayak Shale; Kuskokwim Group; Lead; Limestone; Lode ; Nickel; Nikolai Greenstone; Noatak Sandstone; Nome Group; Nuggets; Orca Group; Ordovician; Ores ; Paleozoic; Palladium; Pennsylvanian; Placer; Platinum; Platinum Group Elements; Plutonic; Plutonic Hosted

Tin resources of Brazil

USGS Publications Warehouse

White, Max Gregg

1974-01-01

Annual tin production in Brazil, most of it from cassiterite placer deposits in Rondonia Territory, amounts to about 4,000 metric tons (4,400 short tons) of concentrate containing 66 percent tin, much of which is consumed by Brazilian industry. Reserves of cassiterite concentrate in the placers of Rondonia district are estimated at about 160,000 (176,000 short tons) containing 66 percent tin. Extensive undiscovered resources of cassiterite possibly exist in southern Rondonia Territory and to the east of the Territory in northern Mato Grosso, southern Amazonas, and southern Para. Numerous occurrences have been reported in these regions and as far to the east as the headwaters of the Tapajos and the Xingo Rivers. Minor deposits or occurrences of cassiterite (or lode deposits about which there is only minimal information available) are located in Para, Amapa, Paraiba, Rio Grande do Norte, Ceara, Bahia, Minas Gerais, Goias, Sao Paulo, and Rio Grande do Sul. All the lode tin deposits are dated or enclosed in rocks that date as Precambrian B (900 to 1,300 m.y.).

Crustal structure and evolution of the Trans-Hudson orogen: Results from seismic reflection profiling

NASA Astrophysics Data System (ADS)

Baird, D. J.; Nelson, K. D.; Knapp, J. H.; Walters, J. J.; Brown, L. D.

1996-04-01

A 400-km-long deep seismic reflection transect across northeastern Montana and northern North Dakota reveals the crustal-scale structural fabric of the Early Proterozoic Trans-Hudson orogen beneath the Williston basin. Comparison with deep seismic reflection data across the Canadian portion of the same orogen ˜700 km to the north reveals first-order similarities in crustal architecture but documents significant along-strike variation in orogenic evolution. Both transects display a broad crustal-scale antiform axial to the orogen. In the north, geologic data suggest that this antiform is cored by an Archean microcontinent. In the south, west dipping reflections on the western flank of the antiform extend from the upper crust to the uppermost mantle and truncate prominent subhorizontal lower crustal reflections of the Archean Wyoming craton. Within the Wyoming craton, the eastern limit of east dipping midcrustal reflections coincides with the subsurface age boundary between the craton and the Early Proterozoic Trans-Hudson orogen as interpreted from potential field and drill core data. On the basis of subsurface geochronologic data from the crystalline basement and by analogy with the Glennie domain within the exposed Trans-Hudson orogen in Canada, we suggest that the southern antiform is cored by an Archean crustal fragment that was caught up in the terminal collision of the Wyoming and Superior cratons during Hudsonian orogeny. The eastern side of the Trans-Hudson orogen is characterized on both seismic transects by predominantly east dipping crustal penetrating reflections. We interpret the easterly dip of these reflections as evidence that the Superior province was thrust westward over the interludes of the orogen during terminal collision. Although juvenile Early Proterozoic terranes characterize the exposed segment of the Trans-Hudson orogen in Canada, limited drill core information within the Dakota segment of the orogen shows a predominance of granulitic Archean age crust. This difference in basement lithologies along strike within the orogen may indicate the following: either juvenile crust comparable to that exposed in the northern Trans-Hudson was never present in the south, or it was removed by progressive over thickening, erosion, and/or faulting. Postorogenic extensional collapse may be responsible for preservation of juvenile terranes in the north.

Evidence for large-scale imbrication during Eocene syn-orogenic exhumation of the Hellenic subduction channel (Cyclades, Greece)

NASA Astrophysics Data System (ADS)

Grasemann, Bernhard; Huet, Benjamin; Schneider, David; Rice, Hugh; Lemonnier, Nicolas; Tschegg, Cornelius

2017-04-01

In the Cyclades, Miocene post-orogenic back-arc extension overprinted the exhumed syn- orogenic Eocene subduction channel. Whereas the exact geometry and kinematics of the syn-orogenic exhumation are still controversial, but must have involved a floor thrust and an apparent normal fault at the roof, the post-orogenic extension, leading to the exhumation of Cordilleran-type metamorphic core complexes, is well constrained by several major detachment systems. On the island of Milos, which is part of the South Aegean Volcanic Arc, minor outcrops of schist occur. New data indicate that these witnessed Eocene blueschist facies metamorphism at 8.5 kbar and 400°C, but escaped the Miocene extensional overprint, as they lie in the hanging wall of the West Cycladic Detachment System. In contrast, eclogite pebbles in "Green Lahars" on Milos yield metamorphic conditions of 19.5 kbar at 550°C. Both high-pressure units belong to the Cycladic Blueschist Unit and can only have been juxtaposed by thrusting. This indicates that two nappes, the newly defined Cycladic Blueschist Nappe and the overlying Cycladic Eclogite Nappe, both comprising rocks of the Cycladic Blueschist Unit, exist on Milos. These nappes probably also form the other Cycladic islands, separated by a syn-orogenic thrust, which we name the Trans Cycladic Thrust. The Trans Cycladic Thrust, which traces the orientation of the syn-orogenic exhumation channel, is partly offset by the post-orogenic Miocene extensional detachment systems. As a result of the Mid- to Late Miocene clockwise crustal block rotation, the syn-orogenic channel, and hence the Trans Cycladic Thrust, bends through 90° at Milos, changing from a W-E trending to a N-S trending extrusion-related stretching lineation. Restoration of the Miocene block-rotation and extension results in syn-orogenic thrusting kinematics (top-SSW) in the Cycladic Blueschist Nappe and along the Trans Cycladic Thrust and syn-orogenic apparent normal faulting kinematics (top-NNE) at the roof of the Cycladic Eclogite Nappe, consistent with the Eocene extrusion of the high-pressure rocks in the Cyclades.

Petrogenesis of postcollisional magmatism at Scheelite Dome, Yukon, Canada: Evidence for a lithospheric mantle source for magmas associated with intrusion-related gold systems

USGS Publications Warehouse

Mair, John L.; Farmer, G. Lang; Groves, David I.; Hart, Craig J.R.; Goldfarb, Richard J.

2011-01-01

The type examples for the class of deposits termed intrusion-related gold systems occur in the Tombstone-Tungsten belt of Alaska and Yukon, on the eastern side of the Tintina gold province. In this part of the northern Cordillera, extensive mid-Cretaceous postcollisional plutonism took place following the accretion of exotic terranes to the continental margin. The most cratonward of the resulting plutonic belts comprises small isolated intrusive centers, with compositionally diverse, dominantly potassic rocks, as exemplified at Scheelite Dome, located in central Yukon. Similar to other spatially and temporally related intrusive centers, the Scheelite Dome intrusions are genetically associated with intrusion-related gold deposits. Intrusions have exceptional variability, ranging from volumetrically dominant clinopyroxene-bearing monzogranites, to calc-alkaline minettes and spessartites, with an intervening range of intermediate to felsic stocks and dikes, including leucominettes, quartz monzonites, quartz monzodiorites, and granodiorites. All rock types are potassic, are strongly enriched in LILEs and LREEs, and feature high LILE/HFSE ratios. Clinopyroxene is common to all rock types and ranges from salite in felsic rocks to high Mg augite and Cr-rich diopside in lamprophyres. Less common, calcic amphibole ranges from actinolitic hornblende to pargasite. The rocks have strongly radiogenic Sr (initial 87Sr/86Sr from 0.711-0.714) and Pb isotope ratios (206Pb/204Pb from 19.2-19.7), and negative initial εNd values (-8.06 to -11.26). Whole-rock major and trace element, radiogenic isotope, and mineralogical data suggest that the felsic to intermediate rocks were derived from mafic potassic magmas sourced from the lithospheric mantle via fractional crystallization and minor assimilation of metasedimentary crust. Mainly unmodified minettes and spessartites represent the most primitive and final phases emplaced. Metasomatic enrichments in the underlying lithospheric mantle are attributes of the ancient North American cratonic margin that appear to be essential prerequisites to this style of postcollisional magmatism and associated gold-rich fluid exsolution. This type of magmatic hydrothermal activity occurs in a very specific tectonic setting that typically sets intrusion-related gold deposits apart from orogenic gold deposits, which are synorogenic in timing and have no consistent direct relationship to such diverse and contemporaneous lithospheric mantle-derived magmas, although they too are commonly sited adjacent to lithospheric boundaries.

Episodicity of Orogeny Revisited

NASA Astrophysics Data System (ADS)

Condie, K. C.; Aster, R. C.

2008-12-01

Although it is well established that orogeny is episodic, the duration, correlation and geographic distribution of orogenic episodes is not well constrained. Using large numbers of concordant U/Pb zircon ages from subduction-related granitoids (> 7000), it is now possible to better constrain these variables. Monte Carlo simulation probabilistic histograms of zircon age spectra remove questionable and spurious age peaks, yet allow resolution of peaks with >10 My duration with the data sets. Orogenic episodes with durations < 20 My, herein called pulses, are generally of regional geographic extent, whereas long-lived events (100-250 My), herein called periods, may be of regional or global extent. Orogenic periods comprise several to many pulses. Most orogenic pulses reflect geographic variations in intensity of subduction or/and plate collisions as for instance recorded around the perimeter of the Pacific basin in the last 100 My. Neither of the widely recognized pulses at 2.7 nor 1.9 Ga is global in extent. Orogenic pulses at 2700 and 2680 Ma occur on four continents each (2700: Superior, Hearne-Rae, Nain, North China; 2680: Yilgarn, Africa, Slave, Wyoming). Likewise, an orogenic pulse at 1880 is found on four continents (Laurentia, Baltica, East Asia, South America), and another pulse at 1860 Ma occurs on three continents (Africa, Siberia, Australia). Some orogenic pulses track lateral continental growth, such as 2730, 2715, and 2700 Ma pulses in the Abitibi greenstone belt, and 850, 800 and 750 Ma pulses in the Arabian-Nubian shield. Major orogenic periods are recognized at 2750-2650, 1900-1650, and 1250-1000 Ma and each of these is associated with supercontinent formation. Orogenic periods at 2600-2500 (China and India) and 2150-2050 Ma (West Africa, Amazonia, Rio de la Plata) may be associated with the formation of small supercontinents. Our results suggest that orogenic periods with intervening gaps may not require sudden and short-lived changes in mantle behavior, but may be associated primarily with the supercontinent cycle, and thus be a characteristic feature of planets with plate tectonics.

40 CFR 440.54 - New source performance standards (NSPS).

Code of Federal Regulations, 2014 CFR

2014-07-01

... reduction attainable by the applications of the best available demonstrated technology (BADT): (a) The concentration of pollutants discharged in mine drainage from mines obtaining titanium ores from lode deposits...) The concentration of pollutants discharged in mine drainage from mines engaged in the dredge mining of...

40 CFR 440.54 - New source performance standards (NSPS).

Code of Federal Regulations, 2012 CFR

2012-07-01

... reduction attainable by the applications of the best available demonstrated technology (BADT): (a) The concentration of pollutants discharged in mine drainage from mines obtaining titanium ores from lode deposits...) The concentration of pollutants discharged in mine drainage from mines engaged in the dredge mining of...

40 CFR 440.54 - New source performance standards (NSPS).

Code of Federal Regulations, 2013 CFR

2013-07-01

... reduction attainable by the applications of the best available demonstrated technology (BADT): (a) The concentration of pollutants discharged in mine drainage from mines obtaining titanium ores from lode deposits...) The concentration of pollutants discharged in mine drainage from mines engaged in the dredge mining of...

Publications - SR 68 | Alaska Division of Geological & Geophysical Surveys

Science.gov Websites

Mining District; Base Metals; Bethel Mining District; Bismuth; Black Mining District; Bluff (Place ; Livengood Mining District; Lode; Marshall Mining District; Massive Sulfide Deposit; Massive Sulfide Occurrence; Massive Sulfide Prospect; Massive Sulfides; McGrath Mining District; Melozitna Mining District

A discussion on the tectonic implications of Ediacaran late- to post-orogenic A-type granite in the northeastern Arabian Shield, Saudi Arabia

NASA Astrophysics Data System (ADS)

Robinson, F. A.; Bonin, B.; Pease, V.; Anderson, J. L.

2017-03-01

The transition from late-orogenic to post-orogenic magmatism following major orogenic episodes such as the Neoproterozoic to Cambrian East African Orogen (EAO) is an important, yet not well-understood geological event marking the cessation of subduction-controlled magmatism between buoyant lithospheric fragments. Forming the northern part of the EAO in the Arabian-Nubian Shield are three granitic suites that successively intruded the same northeastern area and post-date the 640 Ma major orogenic episode: (1) 620-600 Ma alkali feldspar (hypersolvous) granite with alkaline/ferroan/A-type geochemistry, (2) 599 Ma granite cumulates (some garnet-bearing) with calc-alkaline/magnesian affinities, and (3) 584-566 Ma alkali feldspar (hypersolvous) granite (aegirine-bearing) with a distinctive peralkaline/ferroan/A-type signature. Combining whole-rock geochemistry from the southern and northern Arabian Shield, suites 1 and 2 are suggested to be products of late-orogenic slab tear/rollback inducing asthenospheric mantle injection and lower crustal melting/fractionation toward A-type/ferroan geochemistry. Suite 3, however, is suggested to be produced by post-orogenic lithospheric delamination, which replaced the older mantle with new asthenospheric (rare earth element-enriched) mantle that ultimately becomes the thermal boundary layer of the new lithosphere. Major shear zones, such as the 620-540 Ma Najd Fault System (NFS), are some of the last tectonic events recorded across the Arabian Shield. Data presented here suggest that the NFS is directly related to the late-orogenic (620-600 Ma) slab tear/rollback in the northeastern Shield as it met with opposing subduction polarity in the southern Shield. Furthermore, this study infers that east and west Gondwana amalgamation interacted with opposing convergence reflected by the NFS.

Glaciation as a destructive and constructive control on mountain building.

PubMed

Thomson, Stuart N; Brandon, Mark T; Tomkin, Jonathan H; Reiners, Peter W; Vásquez, Cristián; Wilson, Nathaniel J

2010-09-16

Theoretical analysis predicts that enhanced erosion related to late Cenozoic global cooling can act as a first-order influence on the internal dynamics of mountain building, leading to a reduction in orogen width and height. The strongest response is predicted in orogens dominated by highly efficient alpine glacial erosion, producing a characteristic pattern of enhanced erosion on the windward flank of the orogen and maximum elevation controlled by glacier equilibrium line altitude, where long-term glacier mass gain equals mass loss. However, acquiring definitive field evidence of an active tectonic response to global climate cooling has been elusive. Here we present an extensive new low-temperature thermochronologic data set from the Patagonian Andes, a high-latitude active orogen with a well-documented late Cenozoic tectonic, climatic and glacial history. Data from 38° S to 49° S record a marked acceleration in erosion 7 to 5 Myr ago coeval with the onset of major Patagonian glaciation and retreat of deformation from the easternmost thrust front. The highest rates and magnitudes of erosion are restricted to the glacial equilibrium line altitude on the windward western flank of the orogen, as predicted in models of glaciated critical taper orogens where erosion rate is a function of ice sliding velocity. In contrast, towards higher latitudes (49° S to 56° S) a transition to older bedrock cooling ages signifies much reduced late Cenozoic erosion despite dominantly glacial conditions here since the latest Miocene. The increased height of the orogenic divide at these latitudes (well above the equilibrium line altitude) leads us to conclude that the southernmost Patagonian Andes represent the first recognized example of regional glacial protection of an active orogen from erosion, leading to constructive growth in orogen height and width.

The Ross Orogen and Lachlan Fold Belt in Marie Byrd Land, Northern Victoria Land and New Zealand: implication for the tectonic setting of the Lachlan Fold Belt in Antarctica

USGS Publications Warehouse

Bradshaw, J.D.

2007-01-01

Correlation of the Cambrian Delamerian Orogen of Australia and Ross Orogen of the Transantarctic Mountains widely accepted but the extension of the adjacent Lachlan Orogen into Antarctica is controversial. Outside the main Ross-Delamerian belt, evidence of this orogeny is preserved at Mt Murphy in Marie Byrd Land and the in Takaka Terrane of New Zealand. In all pre-break- configurations of the SW Pacific, these two areas are far removed from the Ross-Delamerian belt. Evidence from conglomerates in the Takaka Terrane, however, shows that in Late Cambrian times it was adjacent to the Ross Orogen. This indicates major tectonic displacements within Gondwana after the Cambrian and before break-up. The Lachlan Orogen formed in an extensional belt in a supra-subduction zone setting and the Cambrian rocks of Marie Byrd Land and New Zealand are interpreted as parts of a rifted continental ribbon on the outboard side of the Lachlan belt.

40 CFR 440.54 - New source performance standards (NSPS).

Code of Federal Regulations, 2011 CFR

2011-07-01

... attainable by the applications of the best available demonstrated technology (BADT): (a) The concentration of pollutants discharged in mine drainage from mines obtaining titanium ores from lode deposits shall not exceed... pollutants discharged in mine drainage from mines engaged in the dredge mining of placer deposits of sands...

40 CFR 440.54 - New source performance standards (NSPS).

Code of Federal Regulations, 2010 CFR

2010-07-01

... attainable by the applications of the best available demonstrated technology (BADT): (a) The concentration of pollutants discharged in mine drainage from mines obtaining titanium ores from lode deposits shall not exceed... pollutants discharged in mine drainage from mines engaged in the dredge mining of placer deposits of sands...

43 CFR 3862.4-2 - Contents of published notice.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 43 Public Lands: Interior 2 2011-10-01 2011-10-01 false Contents of published notice. 3862.4-2... MANAGEMENT, DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) MINERAL PATENT APPLICATIONS Lode Mining Claim Patent Applications § 3862.4-2 Contents of published notice. The notices published as required by...

Security Implications of ISAF Exit from Afghanistan on South Asia

DTIC Science & Technology

2014-12-12

Afghanistan for their security interests. Cindy A. Hurst and Robert Mathers , discussed the implications of US withdrawal with reference to the presence...... Mathers , “Strategic Implications of the Afghan Mother Lode.” 42 CHAPTER 5 ANALYSIS OF EXTERNAL FACTORS Afghanistan’s future will be determined by

43 CFR 3862.1-1 - Application for patent.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 43 Public Lands: Interior 2 2013-10-01 2013-10-01 false Application for patent. 3862.1-1 Section... MANAGEMENT, DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) MINERAL PATENT APPLICATIONS Lode Mining Claim Patent Applications § 3862.1-1 Application for patent. (a) At the time the proof of posting is...

43 CFR 3862.1-1 - Application for patent.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 43 Public Lands: Interior 2 2012-10-01 2012-10-01 false Application for patent. 3862.1-1 Section... MANAGEMENT, DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) MINERAL PATENT APPLICATIONS Lode Mining Claim Patent Applications § 3862.1-1 Application for patent. (a) At the time the proof of posting is...

43 CFR 3862.8-1 - Land descriptions in patents.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 43 Public Lands: Interior 2 2014-10-01 2014-10-01 false Land descriptions in patents. 3862.8-1... MANAGEMENT, DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) MINERAL PATENT APPLICATIONS Lode Mining Claim Patent Applications § 3862.8-1 Land descriptions in patents. The land description in a patent for...

43 CFR 3862.1-1 - Application for patent.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 43 Public Lands: Interior 2 2014-10-01 2014-10-01 false Application for patent. 3862.1-1 Section... MANAGEMENT, DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) MINERAL PATENT APPLICATIONS Lode Mining Claim Patent Applications § 3862.1-1 Application for patent. (a) At the time the proof of posting is...

43 CFR 3862.8-1 - Land descriptions in patents.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 43 Public Lands: Interior 2 2012-10-01 2012-10-01 false Land descriptions in patents. 3862.8-1... MANAGEMENT, DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) MINERAL PATENT APPLICATIONS Lode Mining Claim Patent Applications § 3862.8-1 Land descriptions in patents. The land description in a patent for...

43 CFR 3862.8-1 - Land descriptions in patents.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 43 Public Lands: Interior 2 2013-10-01 2013-10-01 false Land descriptions in patents. 3862.8-1... MANAGEMENT, DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) MINERAL PATENT APPLICATIONS Lode Mining Claim Patent Applications § 3862.8-1 Land descriptions in patents. The land description in a patent for...

43 CFR 3862.8-1 - Land descriptions in patents.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 43 Public Lands: Interior 2 2011-10-01 2011-10-01 false Land descriptions in patents. 3862.8-1... MANAGEMENT, DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) MINERAL PATENT APPLICATIONS Lode Mining Claim Patent Applications § 3862.8-1 Land descriptions in patents. The land description in a patent for...

Quantitative analysis of scale of aeromagnetic data raises questions about geologic-map scale

USGS Publications Warehouse

Nykanen, V.; Raines, G.L.

2006-01-01

A recently published study has shown that small-scale geologic map data can reproduce mineral assessments made with considerably larger scale data. This result contradicts conventional wisdom about the importance of scale in mineral exploration, at least for regional studies. In order to formally investigate aspects of scale, a weights-of-evidence analysis using known gold occurrences and deposits in the Central Lapland Greenstone Belt of Finland as training sites provided a test of the predictive power of the aeromagnetic data. These orogenic-mesothermal-type gold occurrences and deposits have strong lithologic and structural controls associated with long (up to several kilometers), narrow (up to hundreds of meters) hydrothermal alteration zones with associated magnetic lows. The aeromagnetic data were processed using conventional geophysical methods of successive upward continuation simulating terrane clearance or 'flight height' from the original 30 m to an artificial 2000 m. The analyses show, as expected, that the predictive power of aeromagnetic data, as measured by the weights-of-evidence contrast, decreases with increasing flight height. Interestingly, the Moran autocorrelation of aeromagnetic data representing differing flight height, that is spatial scales, decreases with decreasing resolution of source data. The Moran autocorrelation coefficient scems to be another measure of the quality of the aeromagnetic data for predicting exploration targets. ?? Springer Science+Business Media, LLC 2007.

Alterations in nanoparticle protein corona by biological surfactants: impact of bile salts on β-lactoglobulin-coated gold nanoparticles.

PubMed

Winuprasith, Thunnalin; Chantarak, Sirinya; Suphantharika, Manop; He, Lili; McClements, David Julian

2014-07-15

The impact of biological surfactants (bile salts) on the protein (β-lactoglobulin) corona surrounding gold nanoparticles (200 nm) was studied using a variety of analytical techniques at pH 7: dynamic light scattering (DLS); particle electrophoresis (ζ-potential); UV-visible (UV) spectroscopy; transmission electron microscopy (TEM); and surface-enhanced Raman scattering (SERS). The bile salts adsorbed to the protein-coated nanoparticle surfaces and altered their interfacial composition, charge, and structure. SERS spectra of protein-coated nanoparticles after bile salt addition contained bands from both protein and bile salts, indicating that the protein was not fully displaced by the bile salts. UV, DLS and TEM techniques also indicated that the protein coating was not fully displaced from the nanoparticle surfaces. The impact of bile salts could be described by an orogenic mechanism: mixed interfaces were formed that consisted of islands of aggregated proteins surrounded by a sea of bile salts. This knowledge is useful for understanding the interactions of bile salts with protein-coated colloidal particles, which may be important for controlling the fate of colloidal delivery systems in the human gastrointestinal tract, or the gastrointestinal fate of ingested inorganic nanoparticles. Copyright © 2014 Elsevier Inc. All rights reserved.

NanoSIMS U-Pb dating of hydrothermally altered monazite: Constraints on the Timing of LaoZaiWan Carlin-type gold deposit in the golden triangle region, SW China

NASA Astrophysics Data System (ADS)

PI, Q.

2017-12-01

Abstract: Direct dating of Carlin-type Au deposits was restricted due to the absence of a geochronometer. Back-scattered electron (BSE) imaging and X-ray element mapping of monazite in gold-rich ore samples from the LaoZaiWan Au deposit in SW China, reveal the presence of distinct, high-Th cores surrounded by low-Th, inclusion-rich rims. The monazite grain is considered to be the product of fluid-aided coupled dissolution-reprecipitation during Au mineralization via prograde metamorphic reactions. We present results of in situ NonSIMS U-Pb dating applied to the rims of monazite . NonSIMS U-Pb age of hydrothermal monazite gave ages of 228 ± 9 Ma(2σ) and 230 ± 16 Ma(2σ) for LaoZaiWan Au deposit. These ages are interpreted as Au mineralization ages, which consistent with the Re-Os age of arsenopyite for JinYa Au deposit, the U-Pb age of rutile for and 40Ar-39Ar age of sericite for Zhesang Au deposit. We postulate that the formation of the Carlin-type Au deposits in the Golden Triangle region was triggered by the Indosinian Orogen, related to collision of the Indochina Block with South China Block.

What controls deformation in a bent three-dimensional orogen? An example from the Bolivian Andes

NASA Astrophysics Data System (ADS)

Kaislaniemi, L.; Whipp, D. M., Jr.

2017-12-01

The width of orogens is thought to be affected by both erosional intensity and strength of the rocks. Along-strike variation of the orogen width can be expected to reflect shifts in these factors. An example of such variation can be found around the Bolivian orocline, which is a change in the orientation of the central Andes, in central Bolivia, from N-S south of 18°S to roughly NW-SE in the north. This bend coincides with 50% reduction in the width of the orogen east of the Altiplano, an approximately eight-fold increase in the annual precipitation, and the presence of a basement arch that reduces the thickness of relatively weak Paleozoic sediments upon which the orogen detaches. This has led to uncertainty about whether the growth of the orogen is controlled primarily by climate (erosion) or tectonics (strength of the basal detachment). We study deformation in a segmented orogen using 3D geodynamic models to understand how along-strike variations in rainfall and basal detachment strength affect orogen deformation and growth of the frontal part of the Andean fold-and-thrust belt (FTB). We calculate the visco-plastic deformation in the retro-wedge of an Andean-style orogen using the finite element software DOUAR (Braun et al. 2008) coupled to the surface process model FastScape (Braun & Willett 2013). The model design includes the basement, the Altiplano, and the FTB east of the plateau. A weak basal detachment zone is prescribed. Strain softening allows development of new faults and free evolution of the detachment zone. The effects of varying rock strength and varying precipitation are considered to determine the primary control(s) on the geometry and evolution of curved orogens. Results show that both increased precipitation and stronger detachment zone can explain differences in the width of the FTB, as reflected in the topography. These factors, however, lead to different structural evolution of the orogen: Weak basal detachment zone promotes growth of the FTB towards the foreland, whereas strong basal detachment keeps the deformation nearer to the plateau. Increased precipitation causes strong localization of the frontal thrust and no internal deformation in the foreland or near the plateau. Strike-slip faults are produced by variation in detachment zone strength, but not by shifts in precipitation rates.

Timing of crust formation and recycling in accretionary orogens: Insights learned from the western margin of South America

NASA Astrophysics Data System (ADS)

Bahlburg, Heinrich; Vervoort, Jeffrey D.; Du Frane, S. Andrew; Bock, Barbara; Augustsson, Carita; Reimann, Cornelia

2009-12-01

Accretionary orogens are considered major sites of formation of juvenile continental crust. In the central and southern Andes this is contradicted by two observations: siliciclastic fills of Paleozoic basins in the central Andean segment of the accretionary Terra Australis Orogen consist almost exclusively of shales and mature sandstones; and magmatic rocks connected to the Famatinian (Ordovician) and Late Paleozoic magmatic arcs are predominantly felsic and characterized by significant crustal contamination and strongly unradiogenic Nd isotope compositions. Evidence of juvenile crustal additions is scarce. We present laser ablation (LA)-ICPMS U-Pb ages and LA-MC-ICPMS Hf isotope data of detrital zircons from seven Devonian to Permian turbidite sandstones incorporated into a Late Paleozoic accretionary wedge at the western margin of Gondwana in northern Chile. The combination with Nd whole-rock isotope data permits us to trace the evolution of the South American continental crust through several Proterozoic and Paleozoic orogenic cycles. The analyzed detrital zircon spectra reflect all Proterozoic orogenic cycles representing the step-wise evolution of the accretionary SW Amazonia Orogenic System between 2.0 and 0.9 Ga, followed by the Terra Australis Orogen between 0.9 and 0.25 Ga. The zircon populations are characterized by two prominent maxima reflecting input from Sunsas (Grenville) age magmatic rocks (1.2-0.9 Ga) and from the Ordovician to Silurian Famatinian magmatic arc (0.52-0.42 Ga). Grains of Devonian age are scarce or absent from the analyzed zircon populations. The Hf isotopic compositions of selected dated zircons at the time of their crystallization ( ɛHf ( T) ; T = 3.3-0.25 Ga) vary between - 18 and + 11. All sandstones have a significant juvenile component; between 20 and 50% of the zircons from each sedimentary rock have positive ɛHf ( T) and can be considered juvenile. The majority of the juvenile grains have Hf-depleted mantle model ages (Hf TDM) between 1.55 and 0.8 Ga, the time of the Rondonia-San Ignacio and Sunsas orogenic events on the Amazonia craton. The corresponding whole-rock ɛNd ( T) values fot these same rocks are between - 8 and - 3 indicating a mixture of older evolved and juvenile sources. Nd-depleted mantle model ages (Nd TDM*) are between 1.5 and 1.2 Ga and coincide broadly with the zircon Hf model ages. Our data indicate that the Paleo- and Mesoproterozoic SW Amazonia Orogenic System, and the subsequent Neoproterozoic and Paleozoic Terra Australis Orogen in the region of the central and southern Andes, developed following two markedly different patterns of accretionary orogenic crustal evolution. The SW Amazonia Orogenic System developed by southwestward growth over approximately 1.1 Ga through a combination of accretion of juvenile material and crustal recycling typical of the extensional or retreating mode of accretionary orogens. In contrast, the central Andean segment of the Terra Australis Orogen evolved from 0.9 to 0.25 Ga in the compressional or advancing mode in a relatively fixed position without the accretion of oceanic crustal units or large scale input of juvenile material to the orogenic crust. Here, recycling mainly of Mesoproterozoic continental crust has been the dominant process of crustal evolution.

The relationship between magnetic anisotropy, rock-strength anisotropy and vein emplacement in gold-bearing metabasalts of Gadag (South India)

NASA Astrophysics Data System (ADS)

Vishnu, C. S.; Lahiri, Sivaji; Mamtani, Manish A.

2018-01-01

In this study the importance of rock strength and its anisotropy in controlling vein emplacement is evaluated by integrating anisotropy of magnetic susceptibility (AMS) with rock mechanics data from massive (visibly isotropic) metabasalts of Gadag region (Dharwar Craton, South India). Orientation of magnetic foliation (MF) is first recognized from AMS. Subsequently, rock mechanics tests viz. ultrasonic P-wave velocity (Vp), uniaxial compressive strength (UCS) and point load strength (Is(50)) are done in cores extracted parallel and perpendicular to MF. Vp is found to be higher in direction parallel to MF than perpendicular to it. In contrast rock strength (UCS and Is(50)) is greater in direction perpendicular to MF, than parallel to it. This proves that rocks from the gold mineralized belt of Gadag have rock strength anisotropy. Orientation of MF in Gadag region is NW-SE, which is also the mean orientation of quartz veins. Previous studies indicate that emplacement of veins in the region took place during regional D3 (NW-SE shortening). Based on the present study, it is concluded that vein emplacement took place in NW-SE orientation because the rocks have strength anisotropy and are weaker in this direction (orientation of MF), which dilated to accommodate fluid flow. In addition, vein intensities are measured along three traverses and found to be variable. It is argued that since mineralization is favoured when the system gets saturated with fluid, variation in fluid flow could not have been responsible for variation in vein intensities in the study area. Since the rock strength of the different blocks investigated here is not uniform, it is envisaged that variation in rock strength played an important role in controlling the vein intensities. It is concluded that rock strength variation controlled strain partitioning and channelized fluid flow thus influencing vein emplacement and mineralization and formation of lodes.

Linkages and feedbacks in orogenic systems: An introduction

USGS Publications Warehouse

Thigpen, J. Ryan; Law, Richard D.; Merschat, Arthur J.; Stowell, Harold

2017-01-01

Orogenic processes operate at scales ranging from the lithosphere to grain-scale, and are inexorably linked. For example, in many orogens, fault and shear zone architecture controls distribution of heat advection along faults and also acts as the primary mechanism for redistribution of heat-producing material. This sets up the thermal structure of the orogen, which in turn controls lithospheric rheology, the nature and distribution of deformation and strain localization, and ultimately, through localized mechanical strengthening and weakening, the fundamental shape of the developing orogenic wedge (Fig. 1). Strain localization establishes shear zone and fault geometry, and it is the motion on these structures, in conjunction with climate, that often focuses erosional and exhumational processes. This climatic focusing effect can even drive development of asymmetry at the scale of the entire wedge (Willett et al., 1993).

Reconnaissance for radioactive deposits in eastern Alaska, 1952

USGS Publications Warehouse

Nelson, Arthur Edward; West, Walter S.; Matzko, John J.

1954-01-01

Reconnaissance for radioactive deposits was conducted in selected areas of eastern Alaska during 1952. Examination of copper, silver, and molybdenum occurrences and of a reported nickel prospect in the Slana-Nabesna and Chisana districts in the eastern Alaska Range revealed a maximum radioactivity of about 0.003 percent equivalent uranium. No appreciable radioactivity anomolies were indicated by aerial and foot traverses in the area. Reconnaissance for possible lode concentrations of uranium minerals in the vicinity of reported fluoride occurrences in the Hope Creek and Miller House-Circle Hot Springs areas of the Circle quadrangle and in the Fortymile district found a maximum of 0.055 percent equivalent uranium in a float fragment of ferruginous breccia in the Hope Creek area; analysis of samples obtained in the vicinity of the other fluoride occurrences showed a maximum of only 0.005 percent equivalent uranium. No uraniferous loads were discovered in the Koyukuk-Chandalar region, nor was the source of the monazite, previously reported in the placer concentrates from the Chandalar mining district, located. The source of the uranotheorianite in the placers at Gold Bench on the South Fork of the Koyukuk River was not found during a brief reconaissance, but a placer concentrate was obtained that contains 0.18 percent equivalent uranium. This concentrate is about ten times more radioactive than concentrates previously available from the area.

First-order control of syntectonic sedimentation on crustal-scale structure of mountain belts

NASA Astrophysics Data System (ADS)

Erdős, Zoltán.; Huismans, Ritske S.; van der Beek, Peter

2015-07-01

The first-order characteristics of collisional mountain belts and the potential feedback with surface processes are predicted by critical taper theory. While the feedback between erosion and mountain belt structure has been fairly extensively studied, less attention has been given to the potential role of synorogenic deposition. For thin-skinned fold-and-thrust belts, recent studies indicate a strong control of syntectonic deposition on structure, as sedimentation tends to stabilize the thin-skinned wedge. However, the factors controlling basement deformation below fold-and-thrust belts, as evident, for example, in the Zagros Mountains or in the Swiss Alps, remain largely unknown. Previous work has suggested that such variations in orogenic structure may be explained by the thermotectonic "age" of the deforming lithosphere and hence its rheology. Here we demonstrate that sediment loading of the foreland basin area provides an additional control and may explain the variable basement involvement in orogenic belts. When examining the role of sedimentation, we identify two end-members: (1) sediment-starved orogenic systems with thick-skinned basement deformation in an axial orogenic core and thin-skinned deformation in the bordering forelands and (2) sediment-loaded orogens with thick packages of synorogenic deposits, derived from the axial basement zone, deposited on the surrounding foreland fold-and-thrust belts, and characterized by basement deformation below the foreland. Using high-resolution thermomechanical models, we demonstrate a strong feedback between deposition and crustal-scale thick-skinned deformation. Our results show that the loading effects of syntectonic sediments lead to long crustal-scale thrust sheets beneath the orogenic foreland and explain the contrasting characteristics of sediment-starved and sediment-loaded orogens, showing for the first time how both thin- and thick-skinned crustal deformations are linked to sediment deposition in these orogenic systems. We show that the observed model behavior is consistent with observations from a number of natural orogenic systems.

Tectonic evolution of the Black Sea orogene belt and the history of opening of the Black Sea basin

DOE Office of Scientific and Technical Information (OSTI.GOV)

Uesuemezsoy, S.

1988-08-01

The Black Sea basin is surrounded by successive orogenic belts of Hercynian, Cimmerian, and Alpine ages. The Rhodope, Thracian, western Pontian, and Transcaucasian (RTPT) blocks of Precambrian age were involved by the circum-Black Sea orogene belts. The Hercynian orogene was documented in the Balkanide, Great Caucasian, Kriastide, southern Pontian, and Transcaucasian belts. The Cimmerian orogene extended north and south of the Black Sea. The southern Cimmerian orogene was represented by the circum-Rhodope and East Thracian-Strandja-Kuere belts. The northern Cimmerian orogene belt extended along the Dobruca-Crimean and southern slope belts. Following the demise of the Black Sea Cimmerian basin, the northernmostmore » oceanic branch extending from Nish-Trajan through the present Black Sea to the intra-Transcaucasian basin, was opened within the Hercynian and Cimmerian consolidated terrain in the Late Jurassic. The other oceanic branch, extending from Izmir-Ankara through circum Kirsehir to various basins, was opened within the Paleotethyan collision belt, considered to be eastern extension of the Pindus basin. The Nish-Trajan sector of the northernmost basin was closed in the middle Cretaceous, and the Moesian platform re-fused to the Getic-Serbo-Macedonian-Rhodope belt. The easternmost extension of the intra-Transcaucasian basin disappeared in the Late Cretaceous. Consequently, the northernmost oceanic branch was reduced to the present Black Sea basin.« less

Hydrothermal alteration, ore fluid characteristics, and gold depositional processes along a trondhjemite-komatiite contact at Tarmoola, Western Australia

USGS Publications Warehouse

Duuring, P.; Hagemann, S.G.; Cassidy, K.F.; Johnson, C.A.

2004-01-01

Tarmoola is a structurally controlled Archean orogenic gold deposit hosted in greenschist facies metamorphosed komatiite and trondhjemite in the Leonora district of the Eastern Goldfields province, Yilgarn craton. High-grade (>1 g/t Au) orebodies are located in komatiite wall rock adjacent to the eastern and northeastern margins of the asymmetrical, north-south-striking, Tarmoola trondhjemite intrusion. Gold-bearing veins post-date trondhjemite emplacement (ca. 2700 Ma), quartz diorite dikes (ca. 2667 Ma), and regional greenschist facies metamorphism. Textures and crosscutting relationships in gold-bearing veins indicate two stages of hydrothermal fluid infiltration associated with a single gold-related hydrothermal event: a volumetrically dominant, but gold-poor, stage I fluid and a gold-rich stage II fluid. Gold-bearing veins contain stage I milky quartz and pyrite that are overprinted by stage II quartz-ankerite-muscovite-chalcopyrite-sphalerite-galena-gold-tellurides ?? albite ?? chlorite ?? fuchsite ?? epidote ?? scheelite. Stage I hydrothermal alteration assemblages are different in trondhjemite and komatiite due to contrasting reactions between a common ore fluid and disparate wall-rock chemistry. Stage II fluid-wall rock interaction was minor compared to stage I and is indicated by the overprinting of stage I mineral assemblages by stage II microveins. Wall-rock alteration proximal to veins in trondhjemite is characterized by replacement of igneous plagioclase, amphibole, biotite, and metamorphic chlorite by hydrothermal quartz, muscovite, ankerite, calcite, pyrite, chalcopyrite, sphalerite, galena, tellurides, and gold, whereas in proximal alteration in komatiite, metamorphic chlorite and talc are replaced by ankerite, quartz, muscovite, albite, chlorite, fuchsite, pyrite, chalcopyrite, sphalerite, galena, tellurides, and gold. The stage II fluid was enriched in H2O, CO2, Si, Ca, K, Na, S, Au, Ag, Cu, Pb, W, Bi, As, Mo, Zn, and Te. Based on fluid inclusion studies and stage II mineral equilibria, gold deposited from a homogeneous, neutral to slightly alkaline (pH 5.1-5.5), reduced, low-salinity (<5.5 wt % NaCl equiv) fluid that had a bulk composition of 78 mole percent H2O and 21 mole percent CO2, and trace amounts of CH4, C2H6, H2, Ar, H2S, and He. Gold deposition occurred at 300?? ?? 50??C and 0.5 to 3.0 kbars. Assuming lithostatic fluid pressures, gold precipitated at a 2- to 10-km depth. Stage II gray quartz ??18Ofluid values range from 5.9 to 7.5 per mil, whereas ??Dfluid values calculated from the dehydration of muscovite grains and measured directly from bulk fluid inclusion analyses of stage II gray quartz have ranges of -9 to -35 and -27 to -28 per mil, respectively. Hydrothermal ore fluids were transported from greater crustal depths to the site of gold deposition during the district-scale D3 event by shallowly W dipping, reverse brittle-ductile shear zones in supracrustal rock and along the steeply east dipping trondhjemite contact. Associated subhorizontal east-west shortening caused the reactivation of the eastern trondhjemite margin and subparallel foliation, which facilitated the transport of hydrothermal fluids and the generation of gold-bearing veins and hydrothermal alteration zones in komatiite. East-west-striking fractures in trondhjemite aided the lateral migration of ore fluids away from trondhjemite margins and the formation of east-west-striking gold-bearing veins and broad alteration zones. Gold was most likely transported in the stage II fluid as bisulfide complexes. The sulfidation of trondhjemite and komatiite wall rock by the stage II fluid caused the destabilization of An bisulfide complexes and gold deposition. Potassium, Ca, and CO2 metasomatism of komatiite wall rock may have enhanced gold deposition via the acidification of the stage II fluid. The physicochemical characteristics of the Tarmoola ore fluid and relative timing of gold mineralization are consistent with the Yilgarn-wide,

43 CFR 3832.34 - How may I use my mill site?

Code of Federal Regulations, 2011 CFR

2011-10-01

... MANAGEMENT, DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) LOCATING MINING CLAIMS OR SITES Mill Sites... plants and substations; (3) Tailings ponds and leach pads; (4) Rock and soil dumps; (5) Water and process... independent mill sites for processing metallic minerals from lode claims using: (1) Quartz or stamp mills; or...

43 CFR 3872.5 - Testimony at hearings to determine character of lands.

Code of Federal Regulations, 2011 CFR

2011-10-01

... (Continued) BUREAU OF LAND MANAGEMENT, DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) ADVERSE CLAIMS...; whether or not there exists within the tract or tracts claimed any lode or vein of quartz or other rock in... practicable, an adequate quantity or number of representative samples of the alleged mineral-bearing matter or...

43 CFR 3832.34 - How may I use my mill site?

Code of Federal Regulations, 2013 CFR

2013-10-01

... MANAGEMENT, DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) LOCATING MINING CLAIMS OR SITES Mill Sites... plants and substations; (3) Tailings ponds and leach pads; (4) Rock and soil dumps; (5) Water and process... independent mill sites for processing metallic minerals from lode claims using: (1) Quartz or stamp mills; or...

43 CFR 3832.34 - How may I use my mill site?

Code of Federal Regulations, 2012 CFR

2012-10-01

... MANAGEMENT, DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) LOCATING MINING CLAIMS OR SITES Mill Sites... plants and substations; (3) Tailings ponds and leach pads; (4) Rock and soil dumps; (5) Water and process... independent mill sites for processing metallic minerals from lode claims using: (1) Quartz or stamp mills; or...

Selected water-quality data for the Standard Mine, Gunnison County, Colorado, 2006-2007

USGS Publications Warehouse

Verplanck, Philip L.; Manning, Andrew H.; Mast, M. Alisa; Wanty, Richard B.; McCleskey, R. Blaine; Todorov, Todor I.; Adams, Monique

2007-01-01

Mine drainage and underground water samples were collected for analysis of inorganic solutes as part of a 1-year, hydrogeologic investigation of the Standard Mine and vicinity. The U.S. Environmental Protection Agency has listed the Standard Mine in the Elk Creek drainage near Crested Butte, Colorado, as a Superfund Site because discharge from the Standard Mine enters Elk Creek, contributing dissolved and suspended loads of zinc, cadmium, copper, and other metals to Coal Creek, which is the primary drinking-water supply for the town of Crested Butte. Water analyses are reported for mine-effluent samples from Levels 1 and 5 of the Standard Mine, underground samples from Levels 3 and 5 of the Standard Mine, mine effluent from an adit located on the Elk Lode, and two spring samples that emerged from waste-rock material below Level 5 of the Standard Mine and the adit located on the Elk Lode. Reported analyses include field parameters (pH, specific conductance, water temperature, dissolved oxygen, and redox potential) and major constituents and trace elements.

Age constraints on felsic intrusions, metamorphism and gold mineralisation in the Palaeoproterozoic Rio Itapicuru greenstone belt, NE Bahia State, Brazil

USGS Publications Warehouse

Mello, E.F.; Xavier, R.P.; McNaughton, N.J.; Hagemann, S.G.; Fletcher, I.; Snee, L.

2006-01-01

U-Pb sensitive high resolution ion microprobe mass spectrometer (SHRIMP) ages of zircon, monazite and xenotime crystals from felsic intrusive rocks from the Rio Itapicuru greenstone belt show two development stages between 2,152 and 2,130 Ma, and between 2,130 and 2,080 Ma. The older intrusions yielded ages of 2,152??6 Ma in monazite crystals and 2,155??9 Ma in zircon crystals derived from the Trilhado granodiorite, and ages of 2,130??7 Ma and 2,128??8 Ma in zircon crystals derived from the Teofila??ndia tonalite. The emplacement age of the syntectonic Ambro??sio dome as indicated by a 2,080??2-Ma xenotime age for a granite dyke probably marks the end of the felsic magmatism. This age shows good agreement with the Ar-Ar plateau age of 2,080??5 Ma obtained in hornblendes from an amphibolite and with a U-Pb SHRIMP age of 2,076??10 Ma in detrital zircon crystals from a quartzite, interpreted as the age of the peak of the metamorphism. The predominance of inherited zircons in the syntectonic Ambro??sio dome suggests that the basement of the supracrustal rocks was composed of Archaean continental crust with components of 2,937??16, 3,111??13 and 3,162??13 Ma. Ar-Ar plateau ages of 2,050??4 Ma and 2,054??2 Ma on hydrothermal muscovite samples from the Fazenda Brasileiro gold deposit are interpreted as minimum ages for gold mineralisation and close to the true age of gold deposition. The Ar-Ar data indicate that the mineralisation must have occurred less than 30 million years after the peak of the metamorphism, or episodically between 2,080 Ma and 2,050 Ma, during uplift and exhumation of the orogen. ?? Springer-Verlag 2006.

Mines and Prospects, Idaho Springs District, Clear Creek and Gilpin Counties, Colorado - Descriptions and Maps

USGS Publications Warehouse

Moench, Robert Hadley; Drake, Avery Ala

1966-01-01

The Idaho Springs mining district forms an important segment of the Front Range mineral belt, a northeast-trending zone of coextensive intrusive rocks and hydrothermal ore deposits of early Tertiary age. This belt, which is about 50 miles long, extends from the region just west of Boulder southwestward across the Front Range. From 1859, when placer gold was discovered in Idaho Springs and lode gold in Central City, through 1959, ores valued at about $200 million were shipped from a 50-square-mile area that includes the Idaho Springs and adjacent districts to the north, west, and southwest. The adjacent Central City district, which produced ores valued at more than $100 million, is clearly the most important district in the mineral belt. The Idaho Springs district from 1860 to 1959 produced ores valued at about $65 million, and the districts to the west and southwest produced smaller amounts. Gold has accounted for about 60 percent of the value of the ore, but in some areas silver provides the chief values, and copper, lead, and zinc add value to the ores in most areas. Mining activity in the Idaho Springs and adjacent districts was at its 'heyday' in the late 1800's, it declined sharply after 1914, it was somewhat renewed during the 1930's, and it greatly declined during World War II. In the 1950's uranium prospecting stimulated some mining activity. No uranium was produced, however, and at the close of the decade only one mine--the Bald Eagle--was being worked for its precious- and base-metal ores. In this report, 135 mines and prospects are described. The mines and prospects described are those that were accessible at the time of this study, as well as a few inaccessible properties for which some information was available. Most of the data for the inaccessible or unimportant properties were obtained from Bastin and Hill (1917) and Spurr, Garrey, and Ball (1908). The following list shows, in alphabetical order, the names of about 325 openings of mines and prospects, their coordinate location on the district map (fig. 1), the page of this report on which their description starts, and the number of the illustration, if any, referring to them.

Crustal structure and continental dynamics of Central China: A receiver function study and implications for ultrahigh-pressure metamorphism

NASA Astrophysics Data System (ADS)

He, Chuansong; Dong, Shuwen; Chen, Xuanhua; Santosh, M.; Li, Qiusheng

2014-01-01

The Qinling-Tongbai-Hong'an-Dabie-Sulu orogenic belt records the tectonic history of Paleozoic convergence between the South China and North China Blocks. In this study, the distribution of crustal thickness and P- and S-wave velocity ratio (Vp/Vs) is obtained by using the H-k stacking technique from the Dabie-Sulu belt in central China. Our results show marked differences in the crustal structure between the Dabie and Sulu segments of the ultrahigh-pressure (UHP) orogen. The lower crust in the Dabie orogenic belt is dominantly of felsic-intermediate composition, whereas the crust beneath the Sulu segment is largely intermediate-mafic. The crust of the Dabie orogenic belt is thicker by ca. 3-5 km as compared to that of the surrounding region with the presence of an ‘orogenic root’. The crustal thickness is nearly uniform in the Dabie orogenic belt with a generally smooth crust-mantle boundary. A symmetrically thickened crust in the absence of any deep-structural features similar to that of the Yangtze block suggests no supportive evidence for the proposed northward subduction of the Yangtze continental block beneath the North China Block. We propose that the collision between the Yangtze and North China Blocks and extrusion caused crustal shortening and thickening, as well as delamination of the lower crust, resulting in asthenospheric upwelling and lower crustal UHP metamorphism along the Dabie Orogen. Our results also reveal the presence of a SE to NW dipping Moho in the North China Block (beneath the Tran-North China Orogen and Eastern Block), suggesting the fossil architecture of the northwestward subduction of the Kula plate.

High-pressure metamorphism in the southern New England Orogen: Implications for long-lived accretionary orogenesis in eastern Australia

NASA Astrophysics Data System (ADS)

Phillips, G.; Offler, R.; Rubatto, D.; Phillips, D.

2015-09-01

New geochemical, metamorphic, and isotopic data are presented from high-pressure metamorphic rocks in the southern New England Orogen (eastern Australia). Conventional and optimal thermobarometry are augmented by U-Pb zircon and 40Ar/39Ar phengite dating to define pressure-temperature-time (P-T-t) histories for the rocks. The P-T-t histories are compared with competing geodynamic models for the Tasmanides, which can be summarized as (i) a retreating orogen model, the Tasmanides formed above a continuous, west dipping, and eastward retreating subduction zone, and (ii) a punctuated orogen model, the Tasmanides formed by several arc accretion, subduction flip, and/or transference events. Whereas both scenarios are potentially supported by the new data, an overlap between the timing of metamorphic recrystallization and key stages of Tasmanides evolution favors a relationship between a single, long-lived subduction zone and the formation, exhumation, and exposure of the high-pressure rocks. By comparison with the retreating orogen model, the following links with the P-T-t histories emerge: (i) exhumation and underplating of oceanic eclogite during the Delamerian Orogeny, (ii) recrystallization of underplated and exhuming high-pressure rocks at amphibolite facies conditions coeval with a period of rollback, and (iii) selective recrystallization of high-pressure rocks at blueschist facies conditions, reflecting metamorphism in a cooled subduction zone. The retreating orogen model can also account for the anomalous location of the Cambrian-Ordovician high-pressure rocks in the Devonian-Carboniferous New England Orogen, where sequential rollback cycles detached and translated parts of the leading edge of the overriding plate to the next, younger orogenic cycle.

San Rafael, Peru: geology and structure of the worlds richest tin lode

NASA Astrophysics Data System (ADS)

Mlynarczyk, Michael S. J.; Sherlock, Ross L.; Williams-Jones, Anthony E.

2003-08-01

The San Rafael mine exploits an unusually high grade, lode-type Sn-Cu deposit in the Eastern Cordillera of the Peruvian Central Andes. The lode is centered on a shallow-level, Late Oligocene granitoid stock, which was emplaced into early Paleozoic metasedimentary rocks. It has a known vertical extent exceeding 1,200 m and displays marked vertical primary metal zoning, with copper overlying tin. The tin mineralization occurs mainly as cassiterite-quartz-chlorite veins and as cassiterite in breccias. The bulk of it is hosted by a K-feldspar megacrystic, biotite- and cordierite-bearing leucomonzogranite, which is the most distinctive phase of the pluton. Copper mineralization occurs predominantly in the veins that straddle the metasedimentary rock-intrusion contact or are hosted entirely by slates. Both tin and copper mineralization are associated with strong chloritic alteration, which is superimposed on an earlier episode of sericitization and tourmaline-quartz veining. Based on the distribution of alteration and ore mineralogy, cassiterite deposition and subsequent chalcopyrite precipitation are believed to have been the result of a single, prolonged hydrothermal event. The source of the metals is inferred to be a highly evolved, peraluminous magma, related to the leucomonzogranitic phase of the San Rafael pluton. Preliminary fluid inclusion microthermometry suggests that ore deposition took place during the mixing of moderate and low salinity fluids, which were introduced in a series of pulses. Several large fault-jogs, created by sinistral-normal, strike-slip movement, are interpreted to have focused synkinematic magmatic fluids and permitted their effective mixing with meteoric waters. It is proposed that this mixing led to rapid oxidation of Sn (II) chloride species and caused supersaturation of the fluids in cassiterite, resulting in the development of localized, high-grade ore shoots. A favorable structural regime that promoted large-scale mixing of two fluids originating under very different physico-chemical conditions appears to have been the key factor responsible for the unusual richness of the deposit.

Fault Dating in the US Rockies and Large Regional Extent of Deformation Pulses Along the Sevier Orogen of North America.

NASA Astrophysics Data System (ADS)

van der Pluijm, B.; Lynch, E. A.; Pana, D.; Yonkee, A.

2017-12-01

Recent Ar dating of clay-rich fault rock in the Canadian Rockies identified multiple orogenic pulses: Late Jurassic (163-146 Ma), Mid-Cretaceous (103-99 Ma), Late Cretaceous (76-72 Ma) and Eocene (54-52 Ma; Pana and van der Pluijm, GSAB 2015). New dating in the US Rockies combined with ages in the most frontal section along an Idaho-Wyoming transect show a remarkably similar age pattern: Meade Thrust, 108-102 Ma; (S)Absaroka Thrust, 73 Ma; Darby-Bear Thrust, 56-50 Ma. These radiometric fault ages in the US Rockies match field and tectono-stratigraphic predictions, analogues to those in the Canadian Rockies. Thus, a remarkably long (>1500km) lateral tract along the North American Sevier orogen is characterized by at least three major orogenic pulses that are structurally contiguous. These orogenic pulses are progressively younger in the direction of easterly thrust fault motion (toward cratonic interior) and are separated by long periods of relative tectonic quiescence. We interpret the extensive regional continuity of deformation pulses and tectonic quiescence along the Sevier Orogen as the result of three plate reorganization events in western North America since the Late Jurassic.

Three depositional states and sedimentary processes of the western Taiwan foreland basin system

NASA Astrophysics Data System (ADS)

Lin, Yi-Jung; Wu, Pei-Jen; Yu, Ho-Shing

2010-05-01

The western Taiwan foreland basin formed during the Early Pliocene as the flexural response to the loading of Taiwan orogen on the Eurasian plate. What makes Taiwan interesting is the oblique collision, which allows the foreland basin to be seen at different stages in its evolution at the present day. Due to oblique arc-continent collision from north to south, the western Taiwan foreland basin has evolved into three distinct subbasins: an over-filled basin proximal to the Taiwan orogen, mainly distributed in the Western Foothills and Coastal Plain provinces, a filled basin occupying the shallow Taiwan Strait continental shelf west of the Taiwan orogen and an under-filled basin distal to the Taiwan orogen in the deep marine Kaoping Slope offshore southwest Taiwan, respectively. The over-filled depositional phase is dominated by fluvial environments across the structurally controlled piggy-back basins. The filled depositional state in the Taiwan Strait is characterized by shallow marine environments and is filled by Pliocene-Quaternary sediments up to 4,000 m thick derived from the Taiwan orogen with an asymmetrical and wedge-shaped cross section. The under-filled depositional state is characteristic of deep marine environments in the wedge-top basins accompanied by active structures of thrust faults and mud diapers. Sediments derived from the Taiwan orogen have progressively filled the western Taiwan foreland basin across and along the orogen. Sediment dispersal model suggests that orogenic sediments derived from oblique dischronous collisional highlands are transported in two different ways. Transport of fluvial and shallow marine sediments is perpendicular to hill-slope and across-strike in the fluvial and shallow marine environments proximal to the orogen. Fine-grained sediments mainly longitudinally transported into the deep marine environments distal to the orogen. The present sedimentary processes in the over-filled basin on land are dominated by fluvial processes of small mountainous rivers. Tidal currents are prevalent in the filled basin in Taiwan Strait, transporting shelf sands and forming sand ridges. The deep marine under-filled basin are dominated by down-slope mass wasting processes, eroding slope strata and transporting sediments to the basin floor. In addition, many submarine canyons on the continental slope offshore southwest Taiwan serve as major sediment pathways, delivering shallow marine sediments to the basin floor.

Constraints on the development of orogenic style gold mineralisation at Mineral de Talca, Coastal Range, central Chile: evidence from a combined structural, mineralogical, S and Pb isotope and geochronological study

NASA Astrophysics Data System (ADS)

Firth, Emily A.; Holwell, David A.; Oliver, Nicholas H. S.; Mortensen, James K.; Rovardi, Matthew P.; Boyce, Adrian J.

2015-08-01

Mineral de Talca is a rare occurrence of Mesozoic, gold-bearing quartz vein mineralisation situated within the Coastal Range of northern Chile. Quartz veins controlled by NNW-SSE-trending faults are hosted by Devonian-Carboniferous metasediments of greenschist facies and younger, undeformed granitoid and gabbro intrusions. The principal structural control in the area is the easterly dipping, NNW-SSE-trending El Teniente Fault, which most likely developed as an extensional normal fault in the Triassic but was later reactivated as a strike-slip fault during subsequent compression. A dilational zone in the El Teniente Fault appears to have focussed fluid flow, and an array of NW-SE-trending veins is present as splays off the El Teniente Fault. Mineralised quartz veins typically up to a metre thick occur in three main orientations: (1) parallel to and within NNW-SSE-trending, E-dipping faults throughout the area; (2) along NW-SE-trending, NE-dipping structures which may also host andesite dykes; and (3) rarer E-W-trending, subvertical veins. All mineralised quartz veins show evidence of multiple fluid events with anastomosing and crosscutting veins and veinlets, some of which contain up to 3.5 vol.% base metal sulphides. Mineralogically, Au is present in three textural occurrences, identified by 3D CT scanning: (1) with arsenopyrite and pyrite in altered wall rock and along the margins of some of the veins; (2) with Cu-Pb-Zn sulphides within quartz veins; and (3) as nuggets and clusters of native Au within quartz. Fluid inclusion work indicates the presence of CO2-CH4-bearing fluids with homogenisation temperatures of ˜350 °C and aqueous fluids with low-moderate salinities (0.4-15.5 wt% NaCl eq.) with homogenisation temperatures in the range of 161-321 °C. The presence of Au with arsenopyrite and pyrite in structurally controlled quartz veins and in greenschist facies rocks with evidence of CO2-bearing fluids is consistent with an orogenic style classification for the mineralisation. However, the significant amounts of base metals and the moderate salinity of some of the fluids and the proximity to felsic granitoid intrusions have raised the possibility of an intrusion-related origin for the mineralisation. Vein sulphides display S isotope signatures (δ34S +2.1 to +4.3 ‰) that are intermediate between the host rock metasediments (δ34S +5.3 to +7.5 ‰) and the local granitoids (δ34S +1.3 to +1.4 ‰), indicating a distinct crustal source of some of the S in the veins and possibly a mixed magmatic-crustal S source. The local granite and granodiorite give U-Pb zircon ages of 219.6 ± 1 and 221.3 ± 2.8 Ma, respectively. Lead isotopic compositions of galena in the veins are consistent, suggesting derivation from a homogeneous source. Differences, however, between the isotopic signatures of the veins and igneous feldspars from nearby intrusions imply that these bodies were not the source of the metals though an igneous source from depth cannot be discounted. The Triassic age of the granitoids is consistent with emplacement during regional crustal extension, with the El Teniente Fault formed as an easterly dipping normal fault. The change to a compressional regime in the mid-Jurassic caused reactivation of the El Teniente Fault as a strike-slip fault and provided a structural setting suitable for orogenic style mineralisation. The intrusions may, however, have provided a structural competency contrast that focused the mineralising fluids in a dilational jog along the El Teniente Fault to form WNW-trending veins. As such, the mineralisation is classified as orogenic style, and the identification of the key mineralogical, isotopic and structural features has implications for exploration and the development of similar deposits along the Coastal Range.

Miocene and early Pliocene epithermal gold-silver deposits in the northern Great Basin, western United States: Characteristics, distribution, and relationship to Magmatism

USGS Publications Warehouse

John, D.A.

2001-01-01

Numerous important Miocene and early Pliocene epithermal Au-Ag deposits are present in the northern Great Basin. Most deposits are spatially and temporally related to two magmatic assemblages: bimodal basalt-rhyolite and western andesite. These magmatic assemblages are petrogenetic suites that reflect variations in tectonic environment of magma generation. The bimodal assemblage is a K-rich tholeiitic series formed during continental rifting. Rocks in the bimodal assemblage consist mostly of basalt to andesite and rhyolite compositions that generally contain anhydrous and reduced mineral assemblages (e.g., quartz + fayalite rhyolites). Eruptive forms include mafic lava flows, dikes, cinder and/or spatter cones, shield volcanoes, silicic flows, domes, and ash-flow calderas. Fe-Ti oxide barometry indicates oxygen fugacities between the magnetite-wustite and fayalite-magnetite-quartz oxygen buffers for this magmatic assemblage. The western andesite assemblage is a high K calc-alkaline series that formed a continental-margin are related to subduction of oceanic crust beneath the western coast of North America. In the northern Great Basin, most of the western andesite assemblage was erupted in the Walker Lane belt, a zone of transtension and strike-slip faulting. The western andesite assemblage consists of stratovolcanoes, dome fields, and subvolcanic plutons, mostly of andesite and dacite composition. Biotite and hornblende phenocrysts are abundant in these rocks. Oxygen fugacities of the western andesite assemblage magmas were between the nickel-nickel oxide and hematite-magnetite buffers, about two to four orders of magnitude greater than magmas of the bimodal assemblage. Numerous low-sulfidation Au-Ag deposits in the bimodal assemblage include deposits in the Midas (Ken Snyder), Sleeper, DeLamar, Mule Canyon, Buckhorn, National, Hog Ranch, Ivanhoe, and Jarbidge districts; high-sulfidation gold and porphyry copper-gold deposits are absent. Both high- and low-sulfidation gold-silver and porphyry copper-gold deposits are affiliated with the western andesite assemblage and include the Comstock Lode, Tonopah, Goldfield, Aurora, Bodie, Paradise Peak, and Rawhide deposits. Low-sulfidation Au-Ag deposits in the bimodal assemblage formed under relatively low oxygen and sulfur fugacities and have generally low total base metal (Cu + Pb + Zn) contents, low Ag/Au ratios, and notably high selenide mineral contents compared to temporally equivalent low-sulfidation deposits in the western andesite assemblage. Petrologic studies suggest that these differences may reflect variations in the magmatic-tectonic settings of the associated magmatic assemblages-deposits in the western andesite assemblage formed from oxidized, water-rich, subduction-related calc-alkaline magmas, whereas deposits in the bimodal assemblage were associated with reduced, water-poor tholeiitic magmas derived from the lithospheric mantle during continental extension. The contrasting types and characteristics of epithermal deposits and their affinities with associated igneous rocks suggest that a genetic relationship is present between these Au-Ag deposits and their temporally associated magmatism, although available data do not prove this relationship for most low-sulfidation deposits.

Gold placers of the historical Fortymile River region, Alaska

USGS Publications Warehouse

Yeend, Warren E.

1996-01-01

The Fortymile River region in east-central Alaska has a long and colorful history as the site of the first major gold discovery in interior Alaska. Placer gold has been mined in the region nearly every year since its original discovery in 1886. Total gold production is approximately 500,000 troy ounces. Although many of the rich deposits have been mined, there still exist areas that contain gold. Areas of mined and unmined gold-bearing creek and terrace gravels are outlined on the accompanying geologic map. The early history of the Fortymile area centered on the small frontier settlement of Fortymile City located at the junction of the Fortymile and Yukon Rivers in Canadian territory. This was the supply and jumping-off point for prospectors who worked their way into Alaska up the Fortymile River and found gold on many of its tributaries. Hand mining, both underground and surface, using sluice boxes and (or) rockers were the earliest methods; later, hydraulicking, dredging, and draglining methods were used. More recently, bulldozers and elevated trammels have been used, as well as very portable floating suction dredges. The rich mining lore of the area is closely associated with events of the nearby world-famous Klondike District. Bedrock and placer geology and mining history of individual gold-rich creeks are herein updated. The Fortymile area, which is part of the Yukon-Tanana Upland, contains quartzite, schist, gneiss, amphibolite, marble, serpentinite, and granite overlain by basalt, sandstone, conglomerate, shale, tuff, and coal; overlying these rocks are several deposits of varying ages consisting of gold-bearing gravel and colluvium. The close spatial association of creeks containing placer gold and the gneiss, schist, amphibolite, and marble unit strongly suggests this metamorphic unit is the gold source. High terrace gravels record a time from the late Tertiary to early Pleistocene when the ancestral Fortymile River and its major tributaries, the North and South Forks, had floodplains roughly 1 to 2 miles (2-3 kilometers) wide and gradients of about 4 feet per mile (0.75 meters per kilometer). Base-level lowering during the post-early Pleistocene caused the rivers to cut into their floodplains and to develop the youthful characteristics they have today such as V-shaped canyons, narrow floodplains, and gradients of at least twice those of the old river. Colluvium marginal to creek deposits in steep-sided valleys is often gold bearing. Much of the unconsolidated gravel within the major drainages of the Fortymile River, South Fork, North Fork, and Mosquito Fork is colluvium.Heavy-mineral-concentrate samples from the gold-producing creeks and high terrace gravels contain varying amounts of magnetite (20 to 80 percent) and ilmenite (10 to 30 percent), and samples from creeks draining areas principally composed of metamorphic rocks contain abundant garnet (10 to 30 percent). Gold fineness ranges from 620 to 927, but it is difficult to attach any geologic significance to the fineness data.Most placer gold in the Fortymile River area has been recovered at, or near, the gravelbedrock contact. The lowermost 3.3 feet (1 meter) of gravel and the uppermost 1.6 feet (0.5 meter) of bedrock may contain as much as 80 to 90 percent of the gold that is ultimately recovered. Gold nuggets are rare and most of the gold recovered is in the form of flattened fragments less than .2 inches (5 millimeters) in greatest dimension. However, large gold nuggets have been found on Wade Creek; examples are ones of 25,33,56, and 70 ounces. Occasionally, large nuggets may still be found in the tailing piles along the creek. The Fortymile River and its tributaries the South Fork, Walker Fork, and Mosquito Fork, all of which at one time were the sites of bucket-line dredge operations, now are almost exclusively mined using floating suction dredges. Unmined gold-bearing gravel is present in the floodplain of the Walker Fork valley below Cherry Creek and in low (about 100 to 130 feet or 30 to 40 meters) terraces along the north side of Walker Fork and east side of Cherry Creek. Considering the locations of where most gold has been found in the South Fork valley both by the older bucket dredges and the modern suction dredges, it seems likely that the tributary drainages of Lost Chicken, Napoleon, Franklin, and Buckskin Creeks have supplied the bulk of the gold to the South Fork valley. A quarter acre (0.10 hectare), 130-foot-thick ( 40 meters) section of the high terrace gravels on the north side of Napoleon Creek was mined for placer gold and yielded values estimated to be $8.50 per cubic yard (or $6.50 per cubic meter) at $350 per troy ounce. The unmined high terrace gravels on the south side of Buckskin Creek contain gold; however, this gravel is only 3 to 6.5 feet (1 to 2 meters) thick. The search for a lode gold source in the Fortymile River region may be in vain, because substantially more gold than has been recovered from the placers can be derived by the gradual erosion of large volumes of source rocks that contain background mean gold amounts. Using Leon's mass balance equation, 5,167 metric tons of gold may exist in the placers of the Fortymile River region, less than 1 percent of the recovered amount of 15.6 tons. The largest gold resource remaining in the Fortymile River region is probably in the high terrace gravels exposed along many of the creeks and rivers. Until there is exploratory drilling or a comprehensive sampling program, the amount of gold in these gravels will remain unknown. Environmental constraints imposed by Federal and State agencies have slowed, but not stopped, placer mining in the Fortymile River area, and a significant gold price rise would result in more mining.

Basin-mountain structures and hydrocarbon exploration potential of west Junggar orogen in China

NASA Astrophysics Data System (ADS)

Wu, X.; Qi, X.; Zheng, M.

2015-12-01

Situated in northern Xinjiang, China, in NE-SW trend, West Junggar Orogen is adjacent to Altai fold belt on the north with the Ertix Fault as the boundary, North Tianshan fold belt on the south with the Ebinur Lake Strike-slip Fault as the boundary, and the Junggar Basin on the southeast with Zaire-Genghis Khan-Hala'alat fold belt as the boundary. Covering an area of about 10×104 km2 in China, there are medium and small intermontane basins, Burqin-Fuhai, Tacheng, Hefeng and Hoxtolgay, distributing inside the orogen. Tectonically West Junggar Orogen lies in the middle section of the Palaeo-Asian tectonic domain where the Siberia, Kazakhstan and Tarim Plates converge, and is the only orogen trending NE-SW in the Palaeo-Asian tectonic domain. Since the Paleozoic, the orogen experienced pre-Permian plate tectonic evolution and post-Permian intra-plate basin evolution. Complex tectonic evolution and multi-stage structural superimposition not only give rise to long term controversial over the basin basement property but also complex basin-mountain coupling relations, structures and basin superimposition modes. According to analysis of several kinds of geological and geophysical data, the orogen was dominated by compressive folding and thrust napping from the Siberia plate in the north since the Late Paleozoic. Compressive stress weakened from north to south, corresponding to subdued vertical movement and enhanced horizontal movement of crustal surface from north to south, and finally faded in the overthrust-nappe belt at the northwest margin of the Junggar Basin. The variation in compressive stress is consistent with the surface relief of the orogen, which is high in the north and low in the south. There are two kinds of basin-mountain coupling relationships, i.e. high angle thrusting and overthrusting and napping, and two kinds of basin superimposition modes, i.e. inherited and progressive, and migrating and convulsionary modes. West Junggar orogen has rich oil and gas shows. Tacheng Basin, north faulted fold belt in the Heshituoluogai basin, and Hongyan fault bench zone in north Ulungur Depression in the Junggar Basin are promising areas for hydrocarbon exploration.

Evolving lithospheric flexure and paleotopography of the Pyrenean Orogen from 3D flexural modeling and basin analysis

NASA Astrophysics Data System (ADS)

Curry, M. E.; van der Beek, P.; Huismans, R. S.; Muñoz, J. A.

2017-12-01

The Pyrenees are an asymmetric, doubly-vergent orogen with retro- and pro- foreland basins that preserve a record of deformation since the Mesozoic. The extensive research and exploration efforts on the mountain belt and flanking foreland basins provide an exceptional dataset for investigating geodynamics and surface processes over large spatial and temporal scales in western Europe. We present the results of a numerical modeling study investigating the spatio-temporal variation in lithospheric flexure in response to the developing orogen. We employ a finite element method to model the 3D flexural deformation of the lithosphere beneath the Pyrenean orogen since the onset of convergence in the late Cretaceous. Using subsurface, geophysical, and structural data, we describe the evolving geometry of both the French Aquitaine and Spanish Ebro foreland basins at the present (post-orogenic), the mid-Eocene (peak orogenic), the Paleocene (early orogenic), and the end of the Cretaceous (pre- to early orogenic). The flexural modeling provides insight into how both the rigidity of the lithosphere and the paleotopographic load have varied over the course of orogenesis to shape the basin geometry. We find that the overriding European plate has higher rigidity than the subducting Iberian plate, with modern Effective Elastic Thickness (EET) values of 20 ± 2 and 12 ± 2 km, respectively. Modeling indicates that the modern rigidity of both plates decreases westward towards the Bay of Biscay. The lithospheric rigidity has increased by 50% since the Mesozoic with early Cenozoic EET values of 13 ± 2 and 8 ± 1 km for the European and Iberian plates, respectively. The topographic load began increasing with convergence in the late Cretaceous, reaching modern levels in the central and eastern Pyrenees by the Eocene. In contrast, the topographic load in the western Pyrenees was 70% of the modern value in the Eocene, and experienced topographic growth through the Oligo-Miocene. The westward propagation of topographic growth and erosion is supported by subsidence analysis and low-temperature thermochronology data. These results have implications for surface processes and foreland basin development of the Pyrenean Orogen, inheritance of Hercynian crustal properties, and the geodynamic evolution of western Europe.

43 CFR 3862.2-3 - Trustee to disclose nature of trust.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 43 Public Lands: Interior 2 2012-10-01 2012-10-01 false Trustee to disclose nature of trust. 3862... Lode Mining Claim Patent Applications § 3862.2-3 Trustee to disclose nature of trust. Any party applying for patent as trustee must disclose fully the nature of the trust and the name of the cestui que...

43 CFR 3862.2-3 - Trustee to disclose nature of trust.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 43 Public Lands: Interior 2 2014-10-01 2014-10-01 false Trustee to disclose nature of trust. 3862... Lode Mining Claim Patent Applications § 3862.2-3 Trustee to disclose nature of trust. Any party applying for patent as trustee must disclose fully the nature of the trust and the name of the cestui que...

43 CFR 3862.2-3 - Trustee to disclose nature of trust.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 43 Public Lands: Interior 2 2013-10-01 2013-10-01 false Trustee to disclose nature of trust. 3862... Lode Mining Claim Patent Applications § 3862.2-3 Trustee to disclose nature of trust. Any party applying for patent as trustee must disclose fully the nature of the trust and the name of the cestui que...

43 CFR 3862.2-3 - Trustee to disclose nature of trust.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 43 Public Lands: Interior 2 2011-10-01 2011-10-01 false Trustee to disclose nature of trust. 3862... Lode Mining Claim Patent Applications § 3862.2-3 Trustee to disclose nature of trust. Any party applying for patent as trustee must disclose fully the nature of the trust and the name of the cestui que...

Permissive tracts for iron oxide copper-gold deposits in Mauritania (phase V, deliverable 78 ): Chapter M1 in Second projet de renforcement institutionnel du secteur minier de la République Islamique de Mauritanie (PRISM-II)

USGS Publications Warehouse

Fernette, Gregory; Horton, John D.

2012-01-01

This report contains the USGS results of the PRISM-II Mauritania Minerals Project and is presented in cooperation with the Ministry of Petroleum, Energy, and Mines of the Islamic Republic of Mauritania. The Report is composed of separate chapters consisting of multidisciplinary interpretive reports with accompanying plates on the geology, structure, geochronology, geophysics, hydrogeology, geochemistry, remote sensing (Landsat TM and ASTER), and SRTM and ASTER digital elevation models of Mauritania. The syntheses of these multidisciplinary data formed the basis for additional chapters containing interpretive reports on 12 different commodities and deposit types known to occur in Mauritania, accompanied by countrywide mineral resource potential maps of each commodity/deposit type. The commodities and deposit types represented include: (1) Ni, Cu, PGE, and Cr deposits hosted in ultramafic rocks; (2) orogenic, Carlin-like, and epithermal gold deposits; (3) polymetallic Pb-Zn-Cu vein deposits; (4) sediment-hosted Pb-Zn-Ag deposits of the SEDEX and Mississippi Valley-type; (5) sediment-hosted copper deposits; ( 6) volcanogenic massive sulfide deposits; (7) iron oxide copper-gold deposits; (8) uranium deposits; (9) Algoma-, Superior-, and oolitic-type iron deposits; (10) shoreline Ti-Zr placer deposits; (11) incompatible element deposits hosted in pegmatites, alkaline rocks, and carbonatites, and; (12) industrial mineral deposits. Additional chapters include the Mauritanian National Mineral Deposits Database are accompanied by an explanatory text and the Mauritania Minerals Project GIS that contains all of the interpretive layers created by USGS scientists. Raw data not in the public domain may be obtained from the Ministry of Petroleum, Energy, and Mines in Nouakchott, Mauritania.

The main features of the Uralian Paleozoic magmatism and the epioceanic nature of the orogen

NASA Astrophysics Data System (ADS)

Fershtater, G. B.

2013-02-01

The 2000 km Uralian Paleozoic orogen is situated on the western flank of the Uralo-Mongolian folded belt. It is characterized by an abundant variety of magmatic rocks and related ore deposits. Uralian Paleozoic magmatism is entirely subduction-related. It is proposed that the Uralian orogen represents a cold mobile belt in which the mantle temperature was 200 to 500 °C cooler than in the adjacent areas; a situation which is similar to the modern West Pacific Triangle Zone including Indonesia, the Philippine Islands, and southern Asia. During the course of the geological evolution of the Uralian orogen, the nature of the magmatism has changed from basic rocks of indisputable mantle origin (460-390 Ma) to mantle-crust gabbro-granitic complexes (370-315 Ma) followed by pure crustal granite magmatism (290-250 Ma). This order in rock type and age reflects the evolution of Paleozoic magmatic complexes from the beginning of subduction to the final stages of the orogen development.

Linking magmatism with collision in an accretionary orogen

PubMed Central

Li, Shan; Chung, Sun-Lin; Wilde, Simon A.; Wang, Tao; Xiao, Wen-Jiao; Guo, Qian-Qian

2016-01-01

A compilation of U-Pb age, geochemical and isotopic data for granitoid plutons in the southern Central Asian Orogenic Belt (CAOB), enables evaluation of the interaction between magmatism and orogenesis in the context of Paleo-Asian oceanic closure and continental amalgamation. These constraints, in conjunction with other geological evidence, indicate that following consumption of the ocean, collision-related calc-alkaline granitoid and mafic magmatism occurred from 255 ± 2 Ma to 251 ± 2 Ma along the Solonker-Xar Moron suture zone. The linear or belt distribution of end-Permian magmatism is interpreted to have taken place in a setting of final orogenic contraction and weak crustal thickening, probably as a result of slab break-off. Crustal anatexis slightly post-dated the early phase of collision, producing adakite-like granitoids with some S-type granites during the Early-Middle Triassic (ca. 251–245 Ma). Between 235 and 220 Ma, the local tectonic regime switched from compression to extension, most likely caused by regional lithospheric extension and orogenic collapse. Collision-related magmatism from the southern CAOB is thus a prime example of the minor, yet tell-tale linking of magmatism with orogenic contraction and collision in an archipelago-type accretionary orogen. PMID:27167207

Accretionary and collisional orogenesis in the south domain of the western Central Asian Orogenic Belt (CAOB)

NASA Astrophysics Data System (ADS)

Cai, Keda; Long, Xiaoping; Chen, Huayong; Sun, Min; Xiao, Wenjiao

2018-03-01

The Central Asian Orogenic Belt (CAOB) was the result of long-lived multi-stage tectonic evolution, including Proterozoic to Paleozoic accretion and collision, Mesozoic intracontinental modification, and Cenozoic rapid deformation and uplift. The accretionary and collisional orogenesis of its early history generated a huge orogenic collage consisting of diverse tectonic units including island arcs, ophiolites, accretionary prisms, seamounts, oceanic plateaus and micro-continents. These incorporated orogenic components preserved valuable detailed information on orogenic process and continental crust growth, which make the CAOB a key region to understanding of continental evolution, mantle-crust interaction and associated mineralization. The western CAOB refers to the west region in North Xinjiang of China and circum-Balkash of Kazakhstan, with occurrences of the spectacular Kazakhstan orocline and its surrounding mountain belts. Because orogenic fabrics of this part mostly preserve their original features caused by the interactions among the southern Siberian active margin in the north and the Tarim Craton in the south, the western CAOB can be regarded as an ideal region to study the processes of the accretionary and collisional orogenesis and associated mineralization. Since a large number of researchers have been working on this region, research advances bloom strikingly in a short-time period. Therefore, we, in this special issue, focus on these new study advances on the south domain of the western CAOB, including the Kazakhstan collage system, Tianshan orogenic belt and Beishan region, and it is anticipated that this issue can draw more attention from the international research groups to be interested in the studies on orogenesis of the CAOB.

Tibet and Beyond: Magmatic Records from CIA (Caucasus-Iran-Anatolia) and Southern Tibet with Implications for Asian Orogeny and Continental Growth

NASA Astrophysics Data System (ADS)

Chung, Sun-Lin

2016-04-01

This study, based on an ongoing joint research project "Tibet and Beyond", presents a synthesis of principal magmatic records from the CIA (Caucasus-Iran-Anatolia) and Tibet-Himalaya orogens resulting from the continental collisions of Arabia and India, respectively, with Eurasia. In both orogens, through this and other recent studies, the temporal and spatial variations in magmatism pre-, syn- and post-dating the collisions can now be much better defined, thus improving our understanding of collision zone magmatism that appears to have evolved with changes in the lithospheric structures over time and space by collisional processes. The two "collisional" Tethyan orogens were preceded by accretionary orogenic processes, which not only had produced a substantial amount of juvenile continental crust but also fulfill the "orogenic cycle" that evolved from an accretionary into a collisional system. Geochemical data reveal that in contrast to generating vast portions of juvenile crust in the early, accretionary stages of orogenic development, crustal recycling plays a more important role in the later, collisional stages. The latter, as exemplified in SE Turkey and southern Tibet, involves addition of older continental crust material back into the mantle, which subsequently melted and caused compositional transformation of the juvenile crust produced in the accretionary stages. Similar features are observed in young volcanic rocks from eastern Taiwan, the northern Luzon arc complex and part of the active subduction/accretion/collision system in Southeast Asia that may evolve one day to resemble the eastern Tethyan and central Asian orogenic belts by collision with the advancing Australian continent.

Tectonic stress evolution in the Pan-African Lufilian Arc and its foreland (Katanga, DRC): orogenic bending, late orogenic extensional collapse and transition to rifting

NASA Astrophysics Data System (ADS)

Kipata, M. L.; Delvaux, D.; Sebagenzi, M. N.; Cailteux, J.; Sintubin, M.

2012-04-01

Between the paroxysm of the Lufilian orogeny at ~ 550 Ma and the late Neogene to Quaternary development of the south-western branch of the East African rift system, the tectonic evolution of the Lufilian Arc and Kundelungu foreland in the Katanga region of the Democratic Republic of Congo remains poorly unknown although it caused important Cu-dominated mineral remobilizations leading to world-class ore deposits. This long period is essentially characterized by brittle tectonic deformations that have been investigated by field studies in open mines spread over the entire arc and foreland. Paleostress tensors were computed for a database of 1450 fault-slip data by interactive stress tensor inversion and data subset separation, and the relative succession of 8 brittle deformation events established. The oldest brittle structures observed are related to the Lufilian brittle compressional climax (stage 1). They have been re-oriented during the orogenic bending that led to the arcuate shape of the belt. Unfolding the stress directions from the first stage allows to reconstruct a consistent NE-SW direction of compression for this stage. Constrictional deformation occurred in the central part of the arc, probably during orogenic bending (Stage 2). After the orogenic bending, a sequence of 3 deformation stages marks the progressive onset of late-orogenic extension: strike-slip deformations (stages 3-4) and late-orogenic arc-parallel extension (stage 5). It is proposed that these 3 stages correspond to orogenic collapse. In early Mesozoic, NW-SE compression was induced by a transpressional inversion, interpreted as induced by far-field stresses generated at the southern active margin of Gondwana (stage 6). Since then, this region was affected by rift-related extension, successively in a NE-SW direction (stage 7, Tanganyika trend) and NW-SE direction (stage 8, Moero trend).

Non-linear feedbacks drive strain partitioning within an active orogen, southern Alaska

NASA Astrophysics Data System (ADS)

Hooks, B.; Koons, P. O.; Upton, P.

2011-12-01

Temperature plays a very important role in the partitioning of deformation within an active orogen. Local variations in the thermal structure of actively uplifting areas can reinforce focused partitioning of strain locally, whereas regional variations can alter deformation patterns on a much broader scale resulting in the re-organization of an entire orogen. Within southern Alaska, the Yakutat micro-terrane has been subducting beneath North America over the previous ~10 Ma. Early deformation related to this event drove uplift of the Alaska Range, as evidenced by stratigraphic and thermochronologic datasets. This was followed by a southerly discontinuous spatial jump in the deformation front to the coastal St. Elias Range. Here we present 3D numerical models that simulate deformation of Earth materials given assigned applied velocity boundary conditions and mechanical and thermal constitutive relationships on a macro- (plate boundary) and meso-scale (<50-km). The goal is to reproduce first-order strain and uplift patterns within this evolving orogen. The macro-scale model undergoes a spatial and temporal reorganization of deformation as strain is progressively shifted to a trench-ward orogenic wedge, the inlet orogen. Subduction related cooling of the fore-arc (i.e. tectonic refrigeration) provides control on the location of the inlet orogen. This control is based upon the creation of a thin sliver of cold, strong material along the mega-thrust interface. The stronger mega-thrust facilitates more efficient transfer of strain, driving the formation of the inlet orogen and determining the location of its frontal toe. This toe is further stabilized by upward displacement of the upper crust over the refrigerated section. This upward motion causes thermal weakening of the upper crust as a tectonic aneurysm with the location controlled by the thermally strengthened lower crust. The net result is an ever weakening upper crust that focuses strain creating dramatic topography, extreme rates of erosion and uplift, and fast exhumation.

The Capricorn Orogen Passive source Array (COPA) in Western Australia

NASA Astrophysics Data System (ADS)

Gessner, K.; Yuan, H.; Murdie, R.; Dentith, M. C.; Johnson, S.; Brett, J.

2015-12-01

COPA is the passive source component of a multi-method geophysical program aimed at assessing the mineral deposits potential of the Proterozoic Capricorn Orogen. Previous results from the active source surveys, receiver functions and magnetotelluric studies show reworked orogenic crust in the orogen that contrasts with more simple crust in the neighbouring Archean cratons, suggesting progressive and punctuated collisional processes during the final amalgamation of the Western Australian craton. Previous seismic studies are all based on line deployment or single station analyses; therefore it is essential to develop 3D seismic images to test whether these observations are representative for the whole orogen. With a careful design that takes advantage of previous passive source surveys, the current long-term and short-term deployments span an area of approximately 500 x 500 km. The 36-month total deployment can guarantee enough data recording for 3D structure imaging using body wave tomography, ambient noise surface wave tomography and P- and S-wave receiver function Common Conversion Point (CCP) stacking techniques. A successive instrument loan from the ANSIR national instrument pool, provided 34 broadband seismometers that have been deployed in the western half of the orogen since March 2014. We expect approximately 40-km lateral resolution near the surface for the techniques we propose, which due to low frequency nature of earthquake waves will degrade to about 100 km near the base of the cratonic lithosphere, which is expected at depths between 200 to 250 km. Preliminary results from the first half of the COPA deployment will be presented in the light of the hypotheses that 1) distinct crustal blocks can be detected continuously throughout the orogen (using ambient noise/body wave tomography); 2) distinct lithologies are present in the crust and upper mantle across the orogen (using receiver function CCP images); and 3) crustal and lithosphere deformation along craton margins in general follows the "wedge" tectonic model (e.g. subduction of Juvenile blocks under the craton mantle as represented by craton-ward dipping sutures.

Late Jurassic-Early Cretaceous continental convergence and intracontinental orogenesis in East Asia: A synthesis of the Yanshan Revolution

NASA Astrophysics Data System (ADS)

Dong, Shuwen; Zhang, Yueqiao; Zhang, Fuqin; Cui, Jianjun; Chen, Xuanhua; Zhang, Shuanhong; Miao, Laicheng; Li, Jianhua; Shi, Wei; Li, Zhenhong; Huang, Shiqi; Li, Hailong

2015-12-01

The basic tectonic framework of continental East Asia was produced by a series of nearly contemporaneous orogenic events in the late Middle Jurassic to Early Cretaceous. Commonly, the Late Mesozoic orogenic processes were characterized by continent-continent collision, large-scale thrusting, strike-slip faulting and intense crustal shortening, crustal thickening, regional anatexis and metamorphism, followed by large-scale lithospheric extension, rifting and magmatism. To better understand the geological processes, this paper reviews and synthesizes existing multi-disciplinary geologic data related to sedimentation, tectonics, magmatism, metamorphism and geochemistry, and proposes a two-stage tectono-thermal evolutionary history of East Asia during the late Middle Jurassic to Early Cretaceous (ca. 170-120 Ma). In the first stage, three orogenic belts along the continental margins were formed coevally at ca. 170-135 Ma, i.e., the north Mongol-Okhotsk orogen, the east paleo-Pacific coastal orogen, and the west Bangong-Nujiang orogen. Tectonism related to the coastal orogen caused extensive intracontinental folding and thrusting that resulted in a depositional hiatus in the Late Jurassic, as well as crustal anatexis that generated syn-kinematic granites, adakites and migmatites. The lithosphere of the East Asian continent was thickened, reaching a maximum during the latest Jurassic or the earliest Cretaceous. In the second stage (ca. 135-120 Ma), delamination of the thickened lithosphere resulted in a remarkable (>120 km) lithospheric thinning and the development of mantle-derived magmatism, mineralization, metamorphic core complexes and rift basins. The Middle Jurassic-Early Cretaceous subduction of oceanic plates (paleo-Pacific, meso-Tethys, and Mongol-Okhotsk) and continent-continent collision (e.g. Lhasa and Qiangtang) along the East Asian continental margins produced broad coastal and intracontinental orogens. These significant tectonic activities, marked by widespread intracontinental orogeny and continental reconstruction, are commonly termed the Yanshan Revolution (Movement) in the Chinese literature.

From the plutonic root to the volcanic roof of a continental magmatic arc: a review of the Neoproterozoic Araçuaí orogen, southeastern Brazil

NASA Astrophysics Data System (ADS)

Gonçalves, Leonardo; Alkmim, Fernando F.; Pedrosa-Soares, Antônio; Gonçalves, Cristiane C.; Vieira, Valter

2018-01-01

The Araçuaí-West Congo orogen (AWCO) is one of the various components of the Brasiliano/Pan-African orogenic network generated during the amalgamation of West Gondwana. In the reconstructions of Gondwana, the AWCO, encompassing the Araçuaí orogen of South America and the West Congo belt of Southwestern Africa, appears as a tongue-shaped orogenic zone embraced by the São Francisco-Congo craton. Differing from the vast majority of the known orogens owing to its singular confined setting, the AWCO contains a large amount of orogenic igneous rocks emplaced in all stages of its tectonic evolution. We present new and revised information about the oldest Ediacaran granitic assemblage, the G1 Supersuite, which together with the Rio Doce Group defines the Rio Doce magmatic arc, and then we propose a new tectonic setting for the arc. Field relationships and mineralogical compositions of the G1 Supersuite allow us to characterize three lithofacies associations, Opx-bearing rocks, enclave-rich Tonalite-Granodiorite and enclave-poor Granite-Tonalite, suggesting different crustal levels are exposed in the central part of the Araçuaí orogen. The region is interpreted to represent a tilted crustal section, with deep arc roots now exposed along its western border. Chemically, these plutonic associations consist mostly of magnesian, metaluminous to slightly peraluminous, calc-alkaline to alkali-calcic and medium- to high-K acidic rocks. The dacitic and rhyolitic rocks of the Rio Doce Group are mainly magnesian, peraluminous, calcic to calc-alkaline, and medium- to high-K acidic rocks. Zircon U-Pb data constrain the crystallization of the granitoids between ca. 625 and 574 Ma, while the age of the metamorphosed volcanic rocks is around ca. 585 Ma. Thus, within errors, these rock associations likely belong to the same magmatic event and might represent the subduction-related, pre-collisional, evolution of the Araçuaí orogen. In addition, whole-rock Sm-Nd isotopic compositions show variable negative ɛNd(t) values between -6.7 and -13.8, and TDM model ages varying from 1.39 to 2.26 Ga, while ɛHf(t) vary between -5.2 and -11.7, with TDM ages from 1.5 to 2.0 Ga. Thus, predominantly constructed upon Paleoproterozoic (Rhyacian) basement, the Rio Doce arc shows crustal sources largely prevailing over mantle sources, providing a well-studied example to be compared with similar orogenic settings around the world.

Human Xq28 Inversion Polymorphism: From Sex Linkage to Genomics--A Genetic Mother Lode

ERIC Educational Resources Information Center

Kirby, Cait S.; Kolber, Natalie; Salih Almohaidi, Asmaa M.; Bierwert, Lou Ann; Saunders, Lori; Williams, Steven; Merritt, Robert

2016-01-01

An inversion polymorphism of the filamin and emerin genes at the tip of the long arm of the human X-chromosome serves as the basis of an investigative laboratory in which students learn something new about their own genomes. Long, nearly identical inverted repeats flanking the filamin and emerin genes illustrate how repetitive elements can lead to…

Report to the Congress on the Strategic Defense Initiative, 1991

DTIC Science & Technology

1991-05-01

ultraviolet, and infrared radiation-hardened charge-coupled device images , step-stare sensor signal processing algorithms , and processor...Demonstration Experiment (LODE) resolved central issues associated with wavefront sensing and control and the 4-meter I Large Advanced Mirror Program (LAMP...21 Figure 4-16 Firepond CO 2 Imaging Radar Demonstration .......................... 4-22 Figure 4-17 IBSS and the Shuttle

Petrogenesis of the Bosworgey granitic cusp in the SW England tin province and its implications for ore mineral genesis

NASA Astrophysics Data System (ADS)

Ball, T. K.; Basham, I. R.

1984-01-01

The Bosworgey granite cusp forms an apical portion of the concealed northern extension of the Tregonning-Godolphin granite ridge. It is characterised by unusually high values of B, P, Mn, Fe, As, Cu, Nb, Ta, Bi, Sn, W, U and S which are present largely as tourmaline, apatite, pyrite, arsenopyrite, chalcopyrite, bismuth, columbite, cassiterite, wolframite and uraninite; and low levels of Zr, Hf, Ti and REE present in zircon, ilmenite and monazite. The granite is classified as Sn and W “specialised” (Tischendorf, 1974) and it belongs to the ilmenite series of Japanese workers. The classification of Chappell and White (1974) (“S” and “I” type granites) is shown to be inapplicable to Cornubian rocks although the Bosworgey samples show characteristics of “S” type granites. The accessory mineral assemblages are typical of high temperature lodes (cassiterite, wolframite, arsenopyrite, chalcopyrite) and the assamblage is concluded to be the cusp analogue of hypothermal lodes produced by extreme differentiation and concentration of volatiles. It is speculated that such granites could provide the parent material for the mesothermal crosscourse mineralisation (pitchblende, bismuth, pyrite, galena, sphalerite).

From a collage of microplates to stable continental crust - an example from Precambrian Europe

NASA Astrophysics Data System (ADS)

Korja, Annakaisa

2013-04-01

Svecofennian orogen (2.0-1.7 Ga) comprises the oldest undispersed orogenic belt on Baltica and Eurasian plate. Svecofennian orogenic belt evolved from a series of short-lived terrane accretions around Baltica's Archean nucleus during the formation of the Precambrian Nuna supercontinent. Geological and geophysical datasets indicate W-SW growth of Baltica with NE-ward dipping subduction zones. The data suggest a long-lived retreating subduction system in the southwestern parts whereas in the northern and central parts the northeasterly transport of continental fragments or microplates towards the continental nucleus is also documented. The geotectonic environment resembles that of the early stages of the Alpine-Himalayan or Indonesian orogenic system, in which dispersed continental fragments, arcs and microplates have been attached to the Eurasian plate margin. Thus the Svecofennian orogeny can be viewed as proxy for the initial stages of an internal orogenic system. Svecofennian orogeny is a Paleoproterozoic analogue of an evolved orogenic system where terrane accretion is followed by lateral spreading or collapse induced by change in the plate architecture. The exposed parts are composed of granitoid intrusions as well as highly deformed supracrustal units. Supracrustal rocks have been metamorphosed in LP-HT conditions in either paleo-lower-upper crust or paleo-upper-middle crust. Large scale seismic reflection profiles (BABEL and FIRE) across Baltica image the crust as a collage of terranes suggesting that the bedrock has been formed and thickened in sequential accretions. The profiles also image three fold layering of the thickened crust (>55 km) to transect old terrane boundaries, suggesting that the over-thickened bedrock structures have been rearranged in post-collisional spreading and/or collapse processes. The middle crust displays typical large scale flow structures: herringbone and anticlinal ramps, rooted onto large scale listric surfaces also suggestive of spreading. Close to the original ocean-continent plate boundary, in the core of the Svecofennian orogen, the thickened accretionary crust carries pervasive stretching lineations at surface and seismic vp-velocity anisotropy in the crust. The direction of spreading and crustal flow seems to be diverted by shapes of the pre-existing boundaries. It is concluded that lateral spreading and midcrustal flow not only rearrange the bedrock architecture but also stabilize the young accreted continental crust in emerging internal orogenic systems. Pre-existing microplate/terrane boundaries will affect the final architecture of the orogenic belt.

Age distribution of lithium-cesium-tantalum enriched pegmatites and relationships to orogeny

NASA Astrophysics Data System (ADS)

McCauley, A.; Bradley, D. C.

2011-12-01

Pegmatites account for about one third of the world's lithium production, most of the tantalum, and all of the cesium. Pegmatites enriched in these elements (LCT pegmatites) are widely interpreted as extreme fractionation products of orogenic granitic melts, although it is not always possible to tie a particular pegmatite to a known granite of the same age. The global age distribution of LCT pegmatites is similar to the age distributions of common pegmatites, of orogenic granites, and of detrital zircons. Our geochronological synthesis expands on, and generally confirms, the recent study by Tkachev (2011, Geol. Soc. Spec. Publ. 350, 7). The LCT pegmatite maxima at ca. 2650, 1800, 525, 350, and 100 Ma correspond to times of collisional orogeny and, except for the comparatively minor peak at 100 Ma, to times of supercontinent assembly. Between these pulses are long intervals of few or no LCT pegmatites. Global minima in LCT pegmatite abundance overlap with supercontinent tenures at ca. 2450-2225, 1625-1000, 875-725, and 250-200 Ma, as established, for the Precambrian, from global minima in the abundances of passive margins and detrital zircons. A key question that bears on both metallogenesis and exploration strategies is why are some orogenic belts well endowed with LCT pegmatites, whereas other, seemingly similar orogens are barren? For the present study, LCT pegmatites from the Appalachian, Variscan, Damara, and Argentine Precordilleran orogens are being dated by the U-Pb method to relate pegmatite emplacement to other igneous events, shortening, metamorphism, foreland-basin sedimentation, and, on the broadest scale, to supercontinent assembly. Anecdotal evidence suggests that LCT pegmatites typically are emplaced late in orogenic cycles. In the Inland Branch of the Damaride orogen, about 45 m.y. elapsed between initial arc-passive margin collision at ca. 550 Ma and LCT pegmatite emplacement at ca. 505 Ma, very late in the assembly of this part of Gondwana. In the Appalachian orogen, LCT pegmatites evidently were emplaced at ca. 345 and ca. 275 Ma-long after initial arc-passive margin collision. Neither time is particularly remarkable in the long sequence of Appalachian orogenic events. The ca. 275 Ma event was coeval with the last increment of Appalachian plate convergence during the final assembly of Pangea. Possible triggers for melt generation in various pegmatite provinces include late collisional crustal thickening, shear heating, mantle plumes, slab break-off, and lower lithospheric delamination.

Structure and Tectonics of the Saint Elias Orogen

NASA Astrophysics Data System (ADS)

Bruhn, R. L.; Pavlis, T. L.; Plafker, G.; Serpa, L.; Picornell, C.

2001-12-01

The Saint Elias orogen of western Canada and southern Alaska is a complex mountain belt formed by transform faulting and subduction between the Pacific and North American plates, and collision of the Yakutat terrane. The orogen is segmented into three regions of different structural style caused by lateral variations in transpression and processes of terrane accretion. Deformation is strain and displacement partitioned throughout the orogen; transcurrent motion is focused along discrete strike-slip faults, and shortening is distributed among reverse faults and folds with sub-horizontal axes. Plunging folds accommodate horizontal shortening and extension in the western part of the orogen. Segment boundaries extend across the Yakutat terrane where they coincide with the courses of huge piedmont glaciers that flow from the topographic backbone of the range onto the coastal plain. The eastern segment is marked by strike-slip faulting along the Fairweather transform fault and by a narrow belt of reverse faulting where the transpression ratio is 0.4:1 shortening to dextral shear. The transpression ratio is 1.7:1 in the central part of the orogen where a broad thin-skinned fold and thrust belt deforms the Yakutat terrane south of the Chugach-Saint Elias (CSE) suture. Dextral shearing is accommodated by strike-slip faulting beneath the Seward and Bagley glaciers in the hanging wall of the CSE suture, and partly by reverse faulting along a structural belt that cuts across the Yakutat terrane along the western edge of the Malaspina Glacier and links to the Pamplona fold and thrust belt offshore. Deformation along this segment boundary is probably also driven by vertical axis bending of the Yakutat microplate during collision. Subduction & accretion in the western segment of the orogen causes re-folding of previously formed structures when they are emplaced into the upper plate of the Alaska-Aleutian mega-thrust. Second phase folds plunge at moderate to steep angles and accretion is marked by only modest amounts of uplift. The structural boundary between the central and western segments of the orogen localizes the course of the Bering piedmont glacier. The structural segments coincide with subdivisions in historical seismicity, particularly ruptures of great to large magnitude earthquakes. The results of this structural study provide the requisite geological framework to design new-generation geophysical monitoring systems to study active deformation within the orogen.

Linking time-Temperature history of the Aquitaine basin with post-orogenic evolution of the Pyrenees : new insights from borehole thermochronology

NASA Astrophysics Data System (ADS)

Fillon, Charlotte; Calassou, Sylvain; Mouthereau, Frédéric; Pik, Raphaël; Bellahsen, Nicolas; Gautheron, Cécile

2017-04-01

Within their sedimentary record, foreland basins document vertical movements of the lithosphere, climatic changes, paleogeograhic evolution but also history of exhumation of the adjacent mountain belt. Comparing vertical movements in a range and in its foreland is key to identify processes involved in growth and destruction of mountain belts. The Aquitaine basin, geomorphologically stable since the early Pyrenean orogenesis has the potential to help understanding the driving mechanisms during the late to post-orogenic phases, but the lack of outcrops makes the studies particularly difficult to achieve. To bring a new point of vue on the processes involved in the Cenozoic exhumation of this range, we present new low-Temperature thermochronology data from boreholes of the Aquitaine basin. With the objectives to study rift-related to post-orogenic processes, numerous low-T thermochronological ages ( 300 across the range) have been published, documenting pre-, syn- , and post-orogenic exhumation in the Pyrenees. Using thermal modeling of a new low-T database in the western Axial Zone, we show that a late Miocene (around 10 Ma) uplift occured in the western Pyrenees, which generalizes the post-orogenic signal already detected in the south central Pyrenees. In previous studies, we linked the post-orogenic exhumation in the Southern Pyrenees to the excavation of the foreland valleys caused by the opening of the endorheic Ebro basin towards the Mediterranean Sea. To the West, the tectonic out-of sequence reactivation of the Gavarnie thrust has been invoked to explain the late Miocene AHe ages in the Bielsa massif. These new data might lead us to re-think the causes for such an exhumation signal during "post-orogenic" times. We thus summarize all evidences for the post-orogenic phase and attempt to provide explanation for it: is exhumation driven by Aquitaine foreland basin evolution? Does it reflect a tectonic reactivation of the Pyrenees? or is the signature of a regional/global climate change conditions ? To answer these questions, we present a new dataset of ZHe and AFT ages from borehole samples in three localities of the Aquitaine basin. We use these new data to link the late Miocene exhumation history with the vertical movements in the Aquitaine basin. This study is part of the Orogen projet, an academic-industrial collaboration (CNRS-Total-BRGM)

Accretionary orogens through Earth history

USGS Publications Warehouse

Cawood, Peter A.; Kroner, A.; Collins, W.J.; Kusky, T.M.; Mooney, W.D.; Windley, B.F.

2009-01-01

Accretionary orogens form at intraoceanic and continental margin convergent plate boundaries. They include the supra-subduction zone forearc, magmatic arc and back-arc components. Accretionary orogens can be grouped into retreating and advancing types, based on their kinematic framework and resulting geological character. Retreating orogens (e.g. modern western Pacific) are undergoing long-term extension in response to the site of subduction of the lower plate retreating with respect to the overriding plate and are characterized by back-arc basins. Advancing orogens (e.g. Andes) develop in an environment in which the overriding plate is advancing towards the downgoing plate, resulting in the development of foreland fold and thrust belts and crustal thickening. Cratonization of accretionary orogens occurs during continuing plate convergence and requires transient coupling across the plate boundary with strain concentrated in zones of mechanical and thermal weakening such as the magmatic arc and back-arc region. Potential driving mechanisms for coupling include accretion of buoyant lithosphere (terrane accretion), flat-slab subduction, and rapid absolute upper plate motion overriding the downgoing plate. Accretionary orogens have been active throughout Earth history, extending back until at least 3.2 Ga, and potentially earlier, and provide an important constraint on the initiation of horizontal motion of lithospheric plates on Earth. They have been responsible for major growth of the continental lithosphere through the addition of juvenile magmatic products but are also major sites of consumption and reworking of continental crust through time, through sediment subduction and subduction erosion. It is probable that the rates of crustal growth and destruction are roughly equal, implying that net growth since the Archaean is effectively zero. ?? The Geological Society of London 2009.

The late cretaceous Donlin Creek gold deposit, Southwestern Alaska: Controls on epizonal ore formation

USGS Publications Warehouse

Goldfarb, R.J.; Ayuso, R.; Miller, M.L.; Ebert, S.W.; Marsh, E.E.; Petsel, S.A.; Miller, L.D.; Bradley, D.; Johnson, Chad; McClelland, W.

2004-01-01

The Donlin Creek gold deposit, southwestern Alaska, has an indicated and inferred resource of approximately 25 million ounces (Moz) Au at a cutoff grade of 1.5 g/t. The ca. 70 Ma deposit is hosted in the Late Cretaceous Kuskokwim flysch basin, which developed in the back part of the are region of an active continental margin, on previously accreted oceanic terranes and continental fragments. A hypabyssal, mainly rhyolitic to rhyodacitic, and commonly porphyritic, 8- ?? 3-km dike complex, part of a regional ca. 77 to 58 Ma magmatic arc, formed a structurally competent host for the mineralization. This deposit is subdivided into about one dozen distinct prospects, most of which consist of dense quartz ?? carbonate veinlet networks that fill north-northeast-striking extensional fractures in the northeast-trending igneous rocks. The sulfide mineral assemblage is dominated by arsenopyrite, pyrite, and, typically younger, stibnite; gold is refractory within the arsenopyrite. Sericitization, carbonatization, and suffidation were the main alteration processes. Fluid inclusion studies of the quartz that hosts the resource indicate dominantly aqueous ore fluids with also about 3 to 7 mol percent CO2 ?? CH4 and a few tenths to a few mole percent NaCl + KCl. The gold-bearing fluids were mainly homogeneously trapped at approximately 275?? to 300??C and at depths of 1 to 2 km. Some of the younger stibnite may have been deposited by late-stage aqueous fluids at lower temperature. Measured ??18O values for the gold-bearing quartz range between 11 and 25 per mil; the estimated ??18O fluid values range from 7 to 12 per mil, suggesting a mainly crustally derived fluid. A broad range of measured ??D values for hydrothermal micas, between -150 and -80 per mil, is suggestive of a contribution from devolatilization of organic matter and/or minor amounts of mixing with meteoric fluids. Gold-associated hydrothermal sulfide minerals are characterized by ??34S values mainly between -16 and -10 per mil, with the sulfur derived from diagenetic pyrite and organic matter within ihe flysch basin. A smaller group of ??34S measurements, which shows values as depleted as -27 per mil, suggests a different local sulfur reservoir in the basin for the later hydrothermal episode dominated by stibnite. Initial ENd of -8.7 to -3.1 and 87Sr/86Sr measurements of 0.706 to 0.709 for the ore-hosting dikes also indicate a crustal reservoir for some of the Late Cretaceous magmatism. Overlapping lead isotope data for these intrusive rocks and for sulfide minerals suggest a crustal contribution for the lead in both. Copper- and gold-bearing stockwork veinlets in hornfels occur at Dome, a prospect located at the northern end of the Donlin Creek deposit. These stockworks are cut by the younger auriferous gold veins that define the main Donlin Creek gold mineralization. Highly saline, gas-rich, heterogeneously trapped fluids deposited the stockworks at temperatures approximately 100??C hotter than those of the main gold-forming event at Donlin Creek. The genetic relationship of the Dome prospect to the main Donlin Creek gold resource is equivocal. The epizonal Donlin Creek deposit shows affinities to the gold systems interpreted by various workers as orogenic or intrusion related; it shows important differences from typical epithermal and Carlin-like deposits. The ore-forming fluids were derived by either broad-scale metamorphic devolatilization above rising mantle melts or exsolution from a magma that was dominated by a significant flysch melt component. ??2004 by Economic Geology.

Oblique contractional reactivation of inherited heterogeneities: Cause for arcuate orogens

PubMed Central

Sokoutis, D.; Willingshofer, E.; Brun, J.‐P.; Gueydan, F.; Cloetingh, S.

2017-01-01

Abstract We use lithospheric‐scale analog models to study the reactivation of pre‐existing heterogeneities under oblique shortening and its relation to the origin of arcuate orogens. Reactivation of inherited rheological heterogeneities is an important mechanism for localization of deformation in compressional settings and consequent initiation of contractional structures during orogenesis. However, the presence of an inherited heterogeneity in the lithosphere is in itself not sufficient for its reactivation once the continental lithosphere is shortened. The heterogeneity orientation is important in determining if reactivation occurs and to which extent. This study aims at giving insights on this process by means of analog experiments in which a linear lithospheric heterogeneity trends with various angles to the shortening direction. In particular, the key parameter investigated is the orientation (angle α) of a strong domain (SD) with respect to the shortening direction. Experimental results show that angles α ≥ 75° (high obliquity) allow for reactivation along the entire SD and the development of a linear orogen. For α ≤ 60° (low obliquity) the models are characterized by the development of an arcuate orogen, with the SD remaining partially non‐reactivated. These results provide a new mechanism for the origin of some arcuate orogens, in which orocline formation was not driven by indentation or subduction processes, but by oblique shortening of inherited heterogeneities, as exemplified by the Ouachita orogen of the southern U.S. PMID:28670046

The crustal structures from Wuyi-Yunkai orogen to Taiwan orogen: the onshore-offshore wide-angle seismic experiment of TAIGER and ATSEE projects

NASA Astrophysics Data System (ADS)

Kuochen, H.; Kuo, N. Y. W.; Wang, C. Y.; Jin, X.; Cai, H. T.; Lin, J. Y.; Wu, F. T.; Yen, H. Y.; Huang, B. S.; Liang, W. T.; Okaya, D. A.; Brown, L. D.

2015-12-01

The crustal structure is key information for understanding the tectonic framework and geological evolution in the southeastern China and its adjacent area. In this study, we integrated the data sets from the TAIGER and ATSEE projects to resolve onshore-offshore deep crustal seismic profiles from the Wuyi-Yunkai orogen to the Taiwan orogen in southeastern China. Totally, there are three seismic profiles resolved and the longest profile is 850 km. Unlike 2D and 3D first arrival travel-time tomography from previous studies, we used both refracted and reflected phases (Pg, Pn, PcP, and PmP) to model the crustal structures and the crustal reflectors. 40 shots, 2 earthquakes, and about 1,950 stations were used and 15,319 arrivals were picked among three transects. As a result, the complex crustal evolution since Paleozoic era are shown, which involved the closed Paleozoic rifted basin in central Fujian, the Cenozoic extension due to South China sea opening beneath the coastline of southern Fujian, and the on-going collision of the Taiwan orogen.

Geochemical and Sm-Nd isotope-geochemical patterns of metavolcanic rocks, diabase, and metagabbroids on the northeastern flank of the South Mongolian-Khingan orogenic belt

NASA Astrophysics Data System (ADS)

Smirnov, Yu. V.; Sorokin, A. A.

2017-05-01

The first results of geochemical and Sm-Nd isotope-geochemical studies of metavolcanic rocks, metagabbroids, and diabase of the Nora-Sukhotino terrane, the least studied part of the South Mongolian-Khingan orogenic belt in the system of the Central Asian orogenic belt are reported. It is established that the basic rocks composing this terrane include varieties comparable with E-MORB, tholeiitic, and calc-alkaline basalt of island arc, calc-alkaline gabbro-diabase, and gabbroids of island arcs. Most likely, these formations should be correlated with metabasalt and associated Late Ordovician gabbro-amphibolite of the Sukdulkin "block" of the South Mongolian-Khingan orogenic belt, which are similar to tholeiite of intraplate island arcs by their geochemical characteristics.

Zircon (U-Th)/He evidence for pre-Eocene orogenic exhumation of eastern North Pyrenean massifs, France

NASA Astrophysics Data System (ADS)

Ternois, Sébastien; Vacherat, Arnaud; Pik, Raphaël; Ford, Mary; Tibari, Bouchaïb

2017-04-01

Orogens and their associated foreland basins are considered as part of a single dynamic system evolving from an early, non equilibrated, growth stage to a late, mature, steady-state stage. Most of our understanding in foreland basins, in particular early convergence-stage deposition, comes from the subducting plate, so that the classic paradigm for foreland basins is the pro-wedge. Models that clearly depict the relationship between erosion of the orogenic wedge and sedimentation into its associated foreland basin only focus on the late post-orogenic phase. Relatively little is known and understood about the very long phase of initiation of orogenesis. In the doubly wedged Pyrenean orogen, where we know and understand relatively little about how the early retro-wedge developed, the record of the onset of orogenic denudation from massifs is quite limited, not only in time but also in space. As part of the OROGEN project funded by TOTAL and the BRGM, this study presents first single-grain zircon (U-Th)/He data from two Palaeozoic massifs of the external Northern Pyrenean Zone, the Agly and Salvezines massifs. It aims at constraining the exhumation history of eastern Pyrenean massifs and understanding what is their significance for early orogenic wedge growth. The Pyrenean orogeny was generated from end Santonian (84 Ma) to Oligocene-Miocene due to convergence of the Iberian and European plates. Aquitaine foreland basin history (Ariège region) indicates that convergence took place in two phases, Campanian to Maastrichian and Eocene, separated by a quiet Paleocene phase. Yet, only Eocene cooling events are recorded by low-temperature thermochronometers in the central Pyrenean massifs (Arize and Trois-Seigneurs). Nine bedrock samples were collected along a WNW-ESE traverse (Salvezines and Saint-Arnac granites, Belesta-Caramany gneisses) and analysed for ZHe dating. Zircon (U-Th)/He data for the Agly and Salvezines massifs, together with forward modelling of data for two end-members, Late Cretaceous (Campanian, 75 Ma) and Eocene (50 Ma), show that the easternmost external basement massifs record a first phase of cooling from ˜200°C, between ca. 75 Ma and ca. 60 Ma, which we correlate with the early Pyrenean orogenic phase. Our data provide important new constraints on the timing of early Pyrenean exhumation and temperatures associated with pre-orogenic HT-LP metamorphism but have limited resolution in quantifying the amount of exhumation and shortening at the onset of the convergence in this region. These results are integrated into a tectonic reconstruction of the eastern Pyrenees from an early Cretaceous extensional template to present day

Svecofennian orogeny in an evolving convergent margin setting

NASA Astrophysics Data System (ADS)

Korja, Annakaisa

2015-04-01

The dominant tectonic mode changes from extension to convergence at around 1.9 Ga in Fennoscandian. The lithological record suggests short lived subduction-related magmatic events followed by deformation and low-pressure high temperature metamorphism. At around 1.8 Ga the subduction systems seem to have stabilized implying continuous supply of oceanic lithosphere. The evolution of the convergent margin is recorded in the rock record and crustal architecture of the long lived Svecofennian orogeny (1.9-1.7 Ga). A closer look at the internal structure of the Svecofennian orogen reveals distinct regional differences. The northern and central parts of the Svecofennian orogen that have been formed during the initial accretionary phase - or compilation of the nucleus - have a thick three-layer crust and with thick mafic lower crust (10-30 km) and block-like internal architecture. Reflection profiles (FIRE1-3) image listric structures flattening on crustal scale décollement zones at the upper-middle crust and middle-upper crust boundaries. The crustal architecture together with large volumes of exposed granitoid rocks suggests spreading of the orogen and the development of an orogenic plateau west of the continental convergence boundary. The architecture is reminiscent of a large hot orogen. Within the western and southwestern part of the Svecofennian orogen (BABEL B, 1, 2, 3&4), which have been envisioned to have formed during continuous subduction phase, the crust is thinner (45-50 km) and it is hosting crustal blocks having one to two crustal layers. Layering is poorly developed in crustal blocks that are found S-SW of NE-dipping mantle reflections previously interpreted as paleo-subduction zones. Within these blocks, the crustal scale reflective structures dip NE (prowedge) or form pop-up wedges (uplifted plug) above the paleo-subduction zones. Crustal blocks with well-developed two-layer crust are located NE of the paleo-subduction zone. The architecture can be interpreted to image a series of abandoned accretion zones where the orogenic structure has developed from a young and cold orogen (BABEL 2,3&4) to a transitional (BABEL 1,6,B) one as the plate boundary is retreating during SW wards. The fast retreating rate of the subduction zone may not only have formed continental back-arc environment but may have restricted the thickening of the upper plate and the growth rate of the orogen. Altogether the architecture suggests a long-lived southwesterly retreating subduction system, with continental back-arc formation in its rear parts and well developed system of prowedge-retrowedge-uplifted plug close to a subduction conduit. Changes in the relative velocities of the upper and lower plate may have resulted in repetitive extensional and compressional phases of the orogeny as has been previously suggested for the southern part of the Svecofennian orogen.

Venus orogenic belt environments - Architecture and origin

NASA Astrophysics Data System (ADS)

Head, James W.; Vorder Bruegge, Richard W.; Crumpler, L. S.

1990-08-01

Orogenic belt environments (Danu, Akna, Freyja, and Maxwell Montes) in Western Ishtar Terra, Venus, display a range of architectural elements, including (from the center of Western Ishtar outward) an inboard plateau (Lakshmi Planum), the linear orogenic belts themselves, outboard plateaus, steep scarps bounding Ishtar, adjacent linear foredeeps and outboard rises, and outboard low-lying volcanic plains. The main elements of the architecture are interpreted to be due to the convergence, underthrusting, and possible subduction of lowland plains at the margins of a preexisting tessera plateau of thicker crust.

Lithosphere structure of the west Qinling orogenic belt revealed by deep seismic reflection profile

NASA Astrophysics Data System (ADS)

Wang, H.

2009-12-01

The west Qinling orogen located in the northeastern margin of the Qinghai-Tibet plateau, is transformation zone between the N-S-trending and E-W-trending tectonics in the Chinese continent. Further study of the fine crust structure of the west Qinling orogen and its relationships with surrounding basins have very important significance for understanding tectonic response of the northeastern margin of the plateau about collision convergence of the Indian block and Asian block and learning formation and evolution of the plateau. In 2009, we reprocessed the data of the Tangke-Hezuo deep seismic reflection profiles collected in 2004 across the west Qinling orogen and the northern Songpan block. The new results show the lithosphere fine structure of the west Qinling orogen. Reflection features indicate that an interface at 6.0-7.0s (TWT) divided the crust into the upper and lower crust, whose structural style and deformation are totally different. Integrating geological data, we deduce that the interface at 6.0-7.0s (depth with 18-21 km) was the basement detachment, which made deformation decoupled of the upper and lower crust. The multi-layered reflections in the upper crust reveal the sedimentary covers of the west Qinling orogen, disclose the thickness of the various structure layer and deformation degree, and provide a basis for the prospective evaluation of a multi-metallic mineral and energy exploration. The north dipping strong reflection characteristics of the lower crust in the west Qinling orogen constituted imbricate structure, such imbricate structural features provide seismology evidence for researching the west Qinling thrusting toward the northern Songpan block, and have great significance for studying formation and evolution of the Songpan-Garze structure. Moho reflections are observed around 17.0-17.2s, characterized by nearly horizontal reflections, which implies the west Qinling orogen underwent an intense extension post orogeny caused the lithosphere extensional thinning formed a nearly level Moho reflections. The study was financed by National Natural Science Foundation of china (No. 40830316 and 40604010),the Basic outlay of scientific research work from Ministry of Science and Technology of the People’s Republic of China and SINOPPROBE-02.

Lateral variations in lithospheric and landscape evolution at both ends of the Himalaya-Tibet orogen

NASA Astrophysics Data System (ADS)

Zeitler, P. K.; Schmidt, J. L.; Meltzer, A.

2015-12-01

At the broadest scale, like many orogens the Himalaya encompass a range of orogenic features that are remarkably similar along much of the length of the mountain belt and its neighboring terranes. At one scale of consideration, these similarities appear to be a signal that fundamental processes associated with lithospheric collision have been active. However, the vast size of the Himalaya and Tibet, the different climate regimes experienced by the orogen across time and space, and the along-strike variations in the continental and arc margins that faced one another before collision, make it at once remarkable that any similarities exist, and important to more critically evaluate their nature. The eastern and western Himalayan syntaxes confound any attempt to generalize too much about the Himalaya-Tibet orogen. By area these features occupy at least 25% of the orogenic belt, and compared to the "main" portions of the arc they show clear differences in their lithospheric structures, landscapes, and evolution. The boundary and initial conditions that shaped the eastern and western indentor corners were and are different, as is the nature and timing of erosional exhumation. Some of the most active geologic processes on Earth have recently been in play within the syntaxes, and the evolution of landscapes and fluvial systems, important in developing the sedimentary record of the Himalaya-Tibet system, has been complex and variable in space and time. Southeasternmost Tibet and the Lhasa Block in particular exemplify this complexity both in its complex topographic evolution linked to surface processes and climate, and in lateral variability in lithospheric structure. Taking a system viewpoint, an important question to debate is the degree to which there are features in the Himalaya-Tibet system that are robustly emergent, given the broad boundary conditions of the continental collision plus the suite of local and regional geodynamical processes that have operated during orogenesis. A related question is the degree to which the variability seen within the orogen represents important information about process that is exportable to other orogens, or is in effect tectonic noise contingent on local geologic details and secular changes.

Preliminary metallogenic belt and mineral deposit maps for northeast Asia

USGS Publications Warehouse

Obolenskiy, Alexander A.; Rodionov, Sergey M.; Dejidmaa, Gunchin; Gerel, Ochir; Hwang, Duk-Hwan; Distanov, Elimir G.; Badarch, Gombosuren; Khanchuk, Alexander I.; Ogasawara, Masatsugu; Nokleberg, Warren J.; Parfenov, Leonid M.; Prokopiev, Andrei V.; Seminskiy, Zhan V.; Smelov, Alexander P.; Yan, Hongquan; Birul'kin, Gennandiy V.; Davydov, Yuriy V.V.; Fridovskiy, Valeriy Yu.; Gamyanin, Gennandiy N.; Kostin, Alexei V.; Letunov, Sergey A.; Li, Xujun; Nikitin, Valeriy M.; Sotnikov, Sadahisa; Sudo, Vitaly I.; Spiridonov, Alexander V.; Stepanov, Vitaly A.; Sun, Fengyue; Sun, Jiapeng; Sun, Weizhi; Supletsov, Valeriy M.; Timofeev, Vladimir F.; Tyan, Oleg A.; Vetluzhskikh, Valeriy G.; Wakita, Koji; Yakovlev, Yakov V.; Zorina, Lydia M.

2003-01-01

The metallogenic belts and locations of major mineral deposits of Northeast Asia are portrayed on Sheets 1-4. Sheet 1 portrays the location of significant lode deposits and placer districts at a scale of 1:7,500,000. Sheets 2-4 portray the metallogenic belts of the region in a series of 12 time-slices from the Archean through the Quaternary at a scale of 1:15,000,000. For all four map sheets, a generalized geodynamics base map, derived from a more detailed map by Parfenov and others (2003), is used as an underlay for the metallogenic belt maps. This geodynamics map underlay permits depicts the major host geologic units and structures that host metallogenic belts. Four tables are included in this report. A hierarchial ranking of mineral deposit models is listed in Table 1. And summary features of lode deposits, placer districts, and metallogenic belts are described in Tables 2, 3, and 4, respectively. The metallogenic belts for Northeast Asia are synthesized, compiled, described, and interpreted with the use of modern concepts of plate tectonics, analysis of terranes and overlap assemblages, and synthesis of mineral deposit models. The data supporting the compilation are: (1) comprehensive descriptions of mineral deposits; (2) compilation and synthesis of a regional geodynamics map the region at 5 million scale with detailed explanations and cited references; and (3) compilation and synthesis of metallogenic belt maps at 15 million scale with detailed explanations and cited references. These studies are part of a major international collaborative study of the Mineral Resources, Metallogenesis, and Tectonics of Northeast Asia that is being conducted from 1997 through 2002 by geologists from earth science agencies and universities in Russia, Mongolia, Northeastern China, South Korea, Japan, and the USA. Companion studies and previous publications are: (1) a detailed geodynamics map of Northeast Asia (Parfenov and 2003); (2) a compilation of major mineral deposit models (Rodionov and Nokleberg, 2000; Rodionov and others, 2000; Obolenskiy and others, 2003); and (3) a database on significant metalliferous and selected nonmetalliferous lode deposits, and selected placer districts (Ariunbileg and others, 2003).

Complex high-strain deformation in the Usagaran Orogen, Tanzania: structural setting of Palaeoproterozoic eclogites

NASA Astrophysics Data System (ADS)

Reddy, S. M.; Collins, A. S.; Mruma, A.

2003-11-01

The Palaeoproterozoic Usagaran Orogen of Tanzania contains the Earth's oldest reported examples of subduction-related eclogite facies rocks. Detailed field mapping of gneisses exposed in the high-grade, eclogite-bearing part of the orogen (the Isimani Suite) indicates a complex deformation and thermal history. Deformation in the Isimani Suite can be broadly subdivided into five events. The first of these (D 1), associated with formation of eclogite facies metamorphism, is strongly overprinted by a pervasive deformation (D 2) at amphibolite facies conditions, which resulted in the accumulation of high strains throughout all of the exposed Isimani rocks. The geometry of foliations and lineations developed during D 2 deformation are variable and have different shear directions that enable five D 2 domains to be identified. Analysis of these domains indicates a geometrical and kinematic pattern that is interpreted to have formed by strain and kinematic partitioning during sinistral transpression. U-Pb SHRIMP zircon ages from a post-D 2 granite and previously published geochronological data from the Usagaran eclogites indicate this deformation took place between 2000 ± 1 Ma and 1877 ± 7 Ma (at 1σ error). Subsequent greenschist facies deformation, localised as shear zones on boundaries separating D 2 domains, have both contractional and extensional geometries that indicate post-1877 Ma reactivation of the Isimani Suite. This reactivation may have taken place during Palaeoproterozoic exhumation of the Usagaran Orogen or may be the result of deformation associated with the Neoproterozoic East African Orogen. U-Th-Pb SHRIMP zircon ages from an Isimani gneiss sample and xenocrysts in a "post-tectonic" granite yield ˜2.7 Ga ages and are similar to published Nd model ages from both the Tanzanian Craton and gneiss exposed east of the Usagaran belt in the East African Orogen. These age data indicate that the Isimani Suite of the Usagaran Orogen reflects reworking of Archaean continental crust. The extensive distribution of ˜2.7 Ga crust in both the footwall and hangingwall of the Usagaran Orogen can only be explained by the collision of two continents if the continents fortuitously had the same protolith ages. We propose that a more likely scenario is that the protoliths of the mafic eclogites were erupted in a marginal basin setting as either oceanic crust, or as limited extrusions along the rifted margin of the Tanzanian Craton. The Usagaran Orogen may therefore reflect the mid-Palaeoproterozoic reassembly of a continental ribbon partially or completely rifted off the craton and separated from it by a marginal basin.

Shear fabrics reveal orogen-parallel deformations, NW Lesser Garhwal Himalaya, Uttarakhand, India

NASA Astrophysics Data System (ADS)

Biswas, T.; Bose, N.; Mukherjee, S.

2017-12-01

Shear deformation along the Himalayan belt is poorly understood unlike that across the orogen. Field observations and structural analysis along Bhagirathi river section along the National Highway 34 reveals NW Lesser Himalaya (Garhwal region, India) suffered both compression and extension parallel to the orogenic belt and thus forms a unique venue of great structural and tectonic interest. Meso-scale ductile- and brittle shear fabrics, such as S-C, C-P, Y-P, Y-S; are emphasized describing such deformations. Extensional shear fabric strikes N43oE and compressional shear fabrics N39.5oE, which are at a low-angle with the orogenic trend. Our study reviews orogen parallel deformation, both extension as well as compression, taking examples from other part of the world (e.g., Central Andes, N Apennines and SW Alps) and from other terrains in the Himalaya. Proposed models are evaluated and compared with the study area. The results shows that the pre-existing remnant structures (e.g., the Delhi-Haridwar ridge) on the under-thrusting Indian shield/plate plays a vital role in modifying thin-skinned tectonics along with migration of the eastward extrusion of the Tibetian plateau (hinterland deformation) into the Himalayan foreland.

Long-term trends of surface-water mercury and methylmercury concentrations downstream of historic mining within the Carson River watershed

USGS Publications Warehouse

Morway, Eric D.; Thodal, Carl E.; Marvin-DiPasquale, Mark C.

2017-01-01

The Carson River is a vital water resource for local municipalities and migratory birds travelling the Pacific Flyway. Historic mining practices that used mercury (Hg) to extract gold from Comstock Lode ore has left much of the river system heavily contaminated with Hg, a practice that continues in many parts of the world today. Between 1998 and 2013, the United States Geological Survey (USGS) collected and analyzed Carson River water for Hg and methylmercury (MeHg) concentrations resulting in a sixteen year record of unfiltered total mercury (uf.THg), filtered (dissolved) Hg (f.THg), total methylmercury (uf.MeHg), filtered MeHg (f.MeHg), and particulate-bound THg (p.THg) and MeHg (p.MeHg) concentrations. This represents one of the longest continuous records of Hg speciation data for any riverine system, thereby providing a unique opportunity to evaluate long-term trends in concentrations and annual loads. During the period of analysis, uf.THg concentration and load trended downward at rates of −0.85% and −1.8% per year, respectively. Conversely, the f.THg concentration increased at a rate of 1.7% per year between 1998 and 2005, and 4.9% per year between 2005 and 2013. Trends in flow-normalized partition coefficients for both Hg and MeHg suggest a statistically significant shift from the particulate to the filtered phase. The upwardly accelerating f.THg concentration and observed shift from the solid phase to the aqueous phase among the pools of Hg and MeHg within the river water column signals an increased risk of deteriorating ecological conditions in the lower basin with respect to Hg contamination. More broadly, the 16-year trend analysis, completed 140 years after the commencement of major Hg releases to the Carson River, provides a poignant example of the ongoing legacy left behind by gold and silver mining techniques that relied on Hg amalgamation, and a cautionary tale for regions still pursuing the practice in other countries.

Neoproterozoic, Paleozoic, and Mesozoic granitoid magmatism in the Qinling Orogen, China: Constraints on orogenic process

NASA Astrophysics Data System (ADS)

Wang, Xiaoxia; Wang, Tao; Zhang, Chengli

2013-08-01

The Qinling Orogen is one of the main orogenic belts in Asia and is characterized by multi-stage orogenic processes and the development of voluminous magmatic intrusions. The results of zircon U-Pb dating indicate that granitoid magmatism in the Qinling Orogen mainly occurred in four distinct periods: the Neoproterozoic (979-711 Ma), Paleozoic (507-400 Ma), and Early (252-185 Ma) and Late (158-100 Ma) Mesozoic. The Neoproterozoic granitic magmatism in the Qinling Orogen is represented by strongly deformed S-type granites emplaced at 979-911 Ma, weakly deformed I-type granites at 894-815 Ma, and A-type granites at 759-711 Ma. They can be interpreted as the products of respectively syn-collisional, post-collisional and extensional setting, in response to the assembly and breakup of the Rodinia supercontinent. The Paleozoic magmatism can be temporally classified into three stages of 507-470 Ma, 460-422 Ma and ˜415-400 Ma. They were genetically related to the subduction of the Shangdan Ocean and subsequent collision of the southern North China Block and the South Qinling Belt. The 507-470 Ma magmatism is spatially and temporally related to ultrahigh-pressure metamorphism in the studied area. The 460-422 Ma magmatism with an extensive development in the North Qinling Belt is characterized by I-type granitoids and originated from the lower crust with the involvement of mantle-derived magma in a collisional setting. The magmatism with the formation age of ˜415-400 Ma only occurred in the middle part of the North Qinling Belt and is dominated by I-type granitoid intrusions, and probably formed in the late-stage of a collisional setting. Early Mesozoic magmatism in the study area occurred between 252 and 185 Ma, with the cluster in 225-200 Ma. It took place predominantly in the western part of the South Qinling Belt. The 250-240 Ma I-type granitoids are of small volume and show high Sr/Y ratios, and may have been formed in a continental arc setting related to subduction of the Mianlue Ocean between the South Qinling Belt and the South China Block. Voluminous late-stage (225-185 Ma) magmatism evolved from early I-type to later I-A-type granitoids associated with contemporaneous lamprophyres, representative of a transition from syn- to post-collisional setting in response to the collision between the North China and the South China blocks. Late Mesozoic (158-100 Ma) granitoids, located in the southern margin of the North China Block and the eastern part of the North Qinling Belt, are characterized by I-type, I- to A-type, and A-type granitoids that were emplaced in a post-orogenic or intraplate setting. The first three of the four periods of magmatism were associated with three important orogenic processes and the last one with intracontinental process. These suggest that the tectonic evolution of the Qinling Orogen is very complicated.

Devonian post-orogenic extension-related volcano-sedimentary rocks in the northern margin of the Tibetan Plateau, NW China: Implications for the Paleozoic tectonic transition in the North Qaidam Orogen

NASA Astrophysics Data System (ADS)

Qin, Yu; Feng, Qiao; Chen, Gang; Chen, Yan; Zou, Kaizhen; Liu, Qian; Jiao, Qianqian; Zhou, Dingwu; Pan, Lihui; Gao, Jindong

2018-05-01

The Maoniushan Formation in the northern part of the North Qaidam Orogen (NQO), NW China, contains key information on a Paleozoic change in tectonic setting of the NQO from compression to extension. Here, new zircon U-Pb, petrological, and sedimentological data for the lower molasse sequence of the Maoniushan Formation are used to constrain the timing of this tectonic transition. Detrital zircons yield U-Pb ages of 3.3-0.4 Ga with major populations at 0.53-0.4, 1.0-0.56, 2.5-1.0, and 3.3-2.5 Ga. The maximum depositional age of the Maoniushan Formation is well constrained by a youngest detrital zircon age of ∼409 Ma. Comparing these dates with geochronological data for the region indicates that Proterozoic-Paleozoic zircons were derived mainly from the NQO as well as the Oulongbuluk and Qaidam blocks, whereas Archean zircons were probably derived from the Oulongbuluk Block and the Tarim Craton. The ∼924, ∼463, and ∼439 Ma tectonothermal events recorded in this region indicate that the NQO was involved in the early Neoproterozoic assembly of Rodinia and early Paleozoic microcontinental convergence. A regional angular unconformity between Devonian and pre-Devonian strata within the NQO suggests a period of strong mountain building between the Oulongbuluk and Qaidam blocks during the Silurian, whereas an Early Devonian post-orogenic molasse, evidence of extensional collapse, and Middle to Late Devonian bimodal volcanic rocks and Carboniferous marine carbonate rocks clearly reflect long-lived tectonic extension. Based on these results and the regional geology, we suggest that the Devonian volcano-sedimentary rocks within the NQO were formed in a post-orogenic extensional setting similar to that of the East Kunlun Orogen, indicating that a major tectonic transition from compression to extension in these two orogens probably commenced in the Early Devonian.

A comparative analysis of pre-Silurian crustal building blocks of the northern and the southern Appalachian orogen

USGS Publications Warehouse

Hibbard, J.P.; van Staal, C.R.; Rankin, D.W.

2007-01-01

The New York promontory serves as the divide between the northern and southern segments of the Appalachian orogen. Antiquated subdivisions, distinct for each segment, implied that they had lithotectonic histories that were independent of each other. Using new lithotectonic subdivisions we compare first order features of the pre-Silurian orogenic 'building blocks' in order to test the validity of the implication of independent lithotectonic histories for the two segments. Three lithotectonic divisions, termed here the Laurentian, Iapetan, and the peri-Gondwanan realms, characterize the entire orogen. The Laurentian realm, composed of native North American rocks, is remarkably uniform for the length of the orogen. It records the multistage Neoproterozoic-early Paleozoic rift-drift history of the Appalachian passive margin, formation of a Taconic Seaway, and the ultimate demise of both in the Middle Ordovician. The Iapetan realm encompasses mainly oceanic and magmatic arc tracts that once lay within the Iapetus Ocean, between Laurentia and Gondwana. In the northern segment, the realm is divisible on the basis of stratigraphy and faunal provinciality into peri-Laurentian and peri-Gondwanan tracts that were amalgamated in the Late Ordovician. South of New York, stratigraphic and faunal controls decrease markedly; rock associations are not inconsistent with those of the northern Appalachians, although second-order differences exist. Exposed exotic crustal blocks of the peri-Gondwanan realm include Ganderia, Avalonia, and Meguma in the north, and Carolinia in the south. Carolinia most closely resembles Ganderia, both in early evolution and Late Ordovician-Silurian docking to Laurentia. Our comparison indicates that, to a first order, the pre-Silurian Appalachian orogen developed uniformly, starting with complex rifting and a subsequent drift phase to form the Appalachian margin, followed by the consolidation of Iapetan components and ending with accretion of the peri-Gonwanan Ganderia and Carolinia. This deduction implies that any first-order differences between northern and southern segments post-date Late Ordovician consolidation of a large portion of the orogen.

Peering into the deep: Illuminating the crustal evolution of the Eucla basement and its relationship to the Albany-Fraser Orogen of southwest Australia.

NASA Astrophysics Data System (ADS)

Hartnady, Michael; Kirkland, Chris; Clark, Chris; Spaggiari, Catherine; Smithies, Hugh

2017-04-01

The Albany-Fraser Orogen is a 1200 km long east to northeasterly trending Palaeoproterozoic to Mesoproterozoic orogenic belt that defines the southern to southeastern margin of the West Australian Craton (WAC). The belt records a long and complex geological history spanning the break-up of Nuna between 2000 and 1700 Ma and amalgamation of Rodinia between 1300 and 1000 Ma. Recent geochronological, geochemical and isotopic work has shown that the Albany-Fraser Orogen formed through a protracted period of reworking of the margin of the Archean Yilgarn Craton (part of the WAC) with various additions of mantle-derived material. The Cretaceous Bight and Cenozoic Eucla Basins partially overlie the northeastern part of the Albany-Fraser Orogen and completely cover 1000 km of crystalline basement (the Eucla basement) that separates the belt from the South Australian Craton. This basement constitutes the glue between the major building blocks of Proterozoic Australia, yet, its geological history is poorly understood. New drill cores penetrating the basement have intersected interlayered granitic and gabbroic rocks that yield U-Pb zircon dates that are dissimilar to any magmatic ages from units within the adjoining Albany-Fraser Orogen, with the exception of the youngest, 1190-1125 Ma magmatic suite. In addition, mantle-like hafnium and neodymium isotopic signatures indicate that the rocks of the Eucla basement are dominated by new juvenile addition, and may represent an allochthonous terrane of oceanic heritage. New ɛHf contour maps for the Albany-Fraser Orogen and Eucla basement highlight this difference. Time-slicing the isotopic dataset reveals a pattern of Palaeoproterozoic juvenile magmatism sub-perpendicular to the present day structural grain in the belt. If this marks the presence of an older lithospheric structure then it demonstrates the power that time-constrained isotopic mapping provides for illuminating lithospheric architecture through time. This may be particularly useful for unravelling crustal evolution in regions with complex tectonic histories.

A crustal model of the ultrahigh-pressure Dabie Shan orogenic belt, China, derived from deep seismic refraction profiling

USGS Publications Warehouse

Wang, Chun-Yong; Zeng, Rong-Sheng; Mooney, W.D.; Hacker, B.R.

2000-01-01

We present a new crustal cross section through the east-west trending ultrahigh-pressure (UHP) Dabie Shan orogenic belt, east central China, based on a 400-km-long seismic refraction profile. Data from our profile reveal that the cratonal blocks north and south of the orogen are composed of 35-km-thick crust consisting of three layers (upper, middle, and lower crust) with average seismic velocities of 6.0±0.2 km/s, 6.5±0.1 km/s, and 6.8±0.1 km/s. The crust reaches a maximum thickness of 41.5 km beneath the northern margin of the orogen, and thus the present-day root beneath the orogen is only 6.5 km thick. The upper mantle velocity is 8.0±0.1 km/s. Modeling of shear wave data indicate that Poisson's ratio increases from 0.24±0.02 in the upper crust to 0.27±0.03 in the lower crust. This result is consistent with a dominantly felsic upper crustal composition and a mafic lower crustal composition within the amphibolite or granulite metamorphic facies. Our seismic model indicates that eclogite, which is abundant in surface exposures within the orogen, is not a volumetrically significant component in the middle or lower crust. Much of the Triassic structure associated with the formation of the UHP rocks of the Dabie Shan has been obscured by post-Triassic igneous activity, extension and large-offset strike-slip faulting. Nevertheless, we can identify a high-velocity (6.3 km/s) zone in the upper (<5 km depth) crustal core of the orogen which we interpret as a zone of ultrahigh-pressure rocks, a north dipping suture, and an apparent Moho offset that marks a likely active strike-slip fault.

Lead Isotope Characteristics of the Mindyak Gold Deposit, Southern Urals: Evidence for the Source of Metals

NASA Astrophysics Data System (ADS)

Chugaev, A. V.; Znamensky, S. E.

2018-01-01

The isotopic composition of Pb in pyrite of the Mindyak orogenic gold deposit located in the Main Ural Fault Zone, the Southern Urals, has been studied by the high-precision MC-ICP-MS method. Orebodies at the deposit are composed of early pyrite and late polysulfide-carbonate-quartz mineral assemblages. The orebodies are localized in olistostrome with carbonaceous clayey-cherty cement. Pyrites from early and late mineral assemblages are close in Pb isotope ratios. For early pyrite 206Pb/204Pb = 18.250-18.336, 207Pb/204Pb = 15.645-15.653, 208Pb/204Pb = 38.179-38.461; while for late pyrite 206Pb/204Pb = 18.102-18.378, 207Pb/204Pb = 15.635-15.646, 208Pb/204Pb = 38.149-38.320. The model parameters μ2 (238U/204Pb = 9.91 ± 2), ω2 (232Th/204Pb = 38.5 ± 4), and 232Th/238U = 3.88 ± 3 indicate that an upper crustal Pb source played a leading role in ore formation. Carbonaceous shale as an olistostrome cement and syngenetic sulfide mineralization are considered to be the main Pb sources of both early and late mineral assemblages. An additional recept in apparently magmatic lead is suggested for the late veinlet mineralization. The involvement of lead from several sources in ore formation is consistent with the genetic model, which assumes a two-stage formation of orebodies at the Mindyak deposit.

Southwest U. S. -East Antarctic (SWEAT) connection: A hypothesis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moores, E.M.

A hypothesis for a late Precambrian fit of western North America with the Australia-Antarctic shield region permits the extension of many features through Antarctica and into other parts of Gondwana. Specifically, the Grenville orogen may extend around the coast of East Antarctica into India and Australia. The Wopmay orogen of northwest Canada may extend through eastern Australia into Antarctica and thence beneath the ice to connect with the Yavapai-Mazatzal orogens of the southwestern US. The ophiolitic belt of the latter may extend into East Antarctica. Counterparts of the Precambrian-Paleozoic sedimentary rocks along the US Cordilleran miogeocline may be present inmore » the Transantarctic Mountains. Orogenic belt boundaries provide useful piercing points for Precambrian continental reconstructions. The model implies that Gondwana and Laurentia rifted away from each other on one margin and collided some 300 m.y. later on their opposite margins to from the Appalachians.« less

Architecture of orogenic belts and convergent zones in Western Ishtar Terra, Venus

NASA Technical Reports Server (NTRS)

Head, James W.; Vorderbruegge, R. W.; Crumpler, L. S.

1989-01-01

Linear mountain belts in Ishtar Terra were recognized from Pioneer-Venus topography, and later Arecibo images showed banded terrain interpreted to represent folds. Subsequent analyses showed that the mountains represented orogenic belts, and that each had somewhat different features and characteristics. Orogenic belts are regions of focused shortening and compressional deformation and thus provide evidence for the nature of such deformation, processes of crustal thickening (brittle, ductile), and processes of crustal loss. Such information is important in understanding the nature of convergent zones on Venus (underthrusting, imbrication, subduction), the implications for rates of crustal recycling, and the nature of environments of melting and petrogenesis. The basic elements of four convergent zones and orogenic belts in western Ishtar Terra are identified and examined, and then assess the architecture of these zones (the manner in which the elements are arrayed), and their relationships. The basic nomenclature of the convergent zones is shown.

Progress towards quantum simulating the classical O(2) Model

DTIC Science & Technology

2014-12-01

approach by building up on simple models sharing some of the basic features of lattice QCD . In the context of condensed matter, a proof of principle that...independently. Explicit Hilbert space repre- sentations of the physical states and of their matrix elements are mostly absent from today’s lattice QCD ...to lattice QCD , seems possible and interesting. ACKNOWLEDGMENTS We thank Masanori Hanada, Peter Orland, Lode Pollet, Boris Svistunov, the participants

Geochemical features of the ore-bearing medium in uranium deposits in the Khiagda ore field

NASA Astrophysics Data System (ADS)

Kochkin, B. T.; Solodov, I. N.; Ganina, N. I.; Rekun, M. L.; Tarasov, N. N.; Shugina, G. A.; Shulik, L. S.

2017-09-01

The Neogene uranium deposits of the Khiagda ore field (KOF) belong to the paleovalley variety of the hydrogene type and differ from other deposits of this genetic type in the geological and geochemical localization conditions. The contemporary hydrogeochemical setting and microbiological composition of ore-bearing medium are discussed. The redox potential of the medium (Eh is as low as-400 mV) is much lower than those established at other hydrogenic deposits, both ancient Late Mesozoic and young Late Alpine, studied with the same methods in Russia, Uzbekistan, and southern Kazakhstan. The pH of subsurface water (6.86-8.13) differs in significant fluctuations both between neighboring deposits and within individual ore lodes. Hydrogen-forming and denitrifying bacteria are predominant in microbiological populations, whereas sulfate-reducing bacteria are low-active. The consideration of these factors allowed us to describe the mechanism of uranium ore conservation as resulting from the development of the cryolithic zone, which isolates ore lodes from the effect of the external medium. Carbonated water supplied from the basement along fault zones also participates in the formation of the present-day hydrogeochemical setting. Based on the features of the ore-bearing medium, we propose a method of borehole in situ acid leaching to increase the efficiency of mining in the Khiagda ore field.

How was the Triassic Songpan-Ganzi basin filled? A provenance study

USGS Publications Warehouse

Enkelmann, E.; Weislogel, A.; Ratschbacher, L.; Eide, E.; Renno, A.; Wooden, J.

2007-01-01

The Triassic Songpan-Ganzi complex comprises >200,000 km2 of 5-15 km thick turbiditic sediments. Although surrounded by several magmatic and orogenic belts, the Triassic high- and ultrahigh-pressure Qinling-Tongbai-Hong'an-Dabie (QTHD) orogen, located several hundred kilometers to the east, was proposed as its major source. Middle to Late Triassic samples from the northern and southern Songpan-Ganzi complex, studied using detrital white mica 40Ar/39Ar ages, Si-in-white mica content, and detrital zircon U/Pb ages, suggest that the northern Songpan-Ganzi deposystem obtained detritus from the north: the north China block, east Kunlun, northern Qaidam, Qilian, and western Qinling; the southern Songpan-Ganzi deposystem was supplied from the northeasterly located Paleozoic QTHD area throughout the Ladinian and received detritus from the Triassic Hong'an-Dabie orogen during the Carnian, indicative of exhumation of the orogen at that time. The QTHD orogen fed the Norian samples in the southeastern southern Songpan-Ganzi deposystem, signifying long drainage channels along the western margin of the south China block. An additional supply from the Emeishan magmatic province and/or the Yidun arc is suggested by the paucity of white mica in the southern Songpan-Ganzi deposystem. Mica ages of Rhaetian sediments from the northwestern Sichuan basin best correlate with those of the Triassic QTHD orogen. Our Si-in-white mica data demonstrate that the high- and ultrahigh-pressure rocks of the Hong'an-Dabie Shan were not exposed in the Middle to Late Triassic. Copyright 2007 by the American Geophysical Union.

Carboniferous rifted arcs leading to an archipelago of multiple arcs in the Beishan-Tianshan orogenic collages (NW China)

NASA Astrophysics Data System (ADS)

Tian, Zhonghua; Xiao, Wenjiao; Windley, Brian F.; Zhang, Ji'en; Zhang, Zhiyong; Song, Dongfang

2017-10-01

The Beishan and East Tianshan Orogenic Collages in the southernmost Central Asian Orogenic Belt (CAOB) record the final stages of evolution of the Paleo-Asian Ocean. These collages and their constituent arcs have an important significance for resolving current controversies regarding their tectonic setting and age, consequent accretionary history of the southern CAOB, and the closure time of the Paleo-Asian Ocean. In this paper, we present our work on the southern Mazongshan arc and the northern Hongyanjing Basin in the Beishan Orogenic Collage (BOC), and our comparison with the Bogda arc and associated basins in the East Tianshan Orogenic Collage. Field relationships indicate that the Pochengshan fault defines the boundary between the arc and basin in the BOC. Volcanic rocks including basalts and rhyolites in the Mazongshan arc have bimodal calc-alkaline characteristics, an enrichment in large ion lithophile elements such as Rb, Ba, and Pb and depletion in high field-strength elements (e.g., Nb and Ta), which were probably developed in a subduction-related tectonic setting. We suggest that these bimodal calc-alkaline volcanic rocks formed in rifted arcs instead of post-orogenic rifts with mantle plume inputs. By making detailed geochemical comparisons between the Mazongshan arc and the Bogda arc to the west, we further propose that they are similar and both formed in arc rifts, and helped generate a Carboniferous archipelago of multiple arcs in the southern Paleo-Asian Ocean. These data and ideas enable us to postulate a new model for the tectonic evolution of the southern CAOB.

Transient Landscape Evolution is Characteristic of Post-Orogenic Decay: An Example from the Southern Appalachians, U.S.A.

NASA Astrophysics Data System (ADS)

Gallen, S. F.

2016-12-01

Long-term landscape evolution in post-orogenic settings remains an outstanding question in the geosciences. Despite conventional wisdom that topography in dead orogens will slowly and steadily decay through time, observations from around the globe show that dynamic, unsteady (e.g. transient) landscape evolution is the norm. Unraveling the mechanisms that drive unsteadiness in dead orogens is paramount to understanding the stratigraphic record of offshore basins and the geologic factors that contribute to the high biodiversity common in these settings. Here we address the enigma of unsteady post-orogenic landscape evolution with a study of the geomorphology of southern Appalachians, U.S.A. We focus on the 58,000 km2 Upper Tennessee River Basin that covers portions of the fold-and-thrust belt (Valley and Ridge), foreland basin (Appalachian Plateau), and a deeply exhumed thrust sheet (Blue Ridge) of this dead orogen. Using published millennial-scale erosion rates and quantitative analysis of fluvial topography, we show that this region is in a transient state of adjustment to 400 m of base level fall. Ongoing adjustment to base level drop is observed as a zone of high erosion rates, steep river channels and numerous knickpoints located upstream of and surrounding the contact between the Valley and Ridge and adjacent lithotectonic units. We argue that the association of adjusting landscapes and the Valley and Ridge contact is due to the rapid response time of rivers incising soft Valley and Ridge rocks, relative to the harder metamorphic rocks in the Blue Ridge and resistant capstone in the Appalachian Plateau. We propose that base level fall was triggered by incision through the Appalachian Plateau capstone into underlying weaker rocks that set off a wave of transient adjustment, drainage reorganization and ultimately capture of the paleo-Upper Tennessee Basin. Our results indicate that transient landscape evolution is characteristic of post-orogenic settings, as rivers continually incise through rock-types of varying erosional resistance in ancient foreland basins and fold-and-thrust belts. Thus, unsteadiness in dead orogens reflects the legacy of past tectonic events and may have little to do with epeirogenic uplift or climate induced changes in erosional efficiency, as is often the interpretation.

Collisional Tectonics in the St. Elias Orogen, Alaska Observed by GPS

NASA Astrophysics Data System (ADS)

Elliott, J.; Freymueller, J. T.; Larsen, C. F.

2008-12-01

The rugged topography of the St. Elias orogen of southern Alaska and the adjacent region of Canada is the result of the on-going collision of the Yakutat block with southern Alaska. Nearly 45 mm/yr of NW-SE directed convergence from the collision is currently accommodated within the St. Elias orogen. A key to understanding this complex collisional boundary is knowing the locations of the structures taking up the convergence. GPS provides a snapshot of the present-day strain field and helps to delineate active structures. As part of the St. Elias Erosion/Tectonics Project (STEEP), we re-surveyed 70 campaign GPS sites across the St. Elias orogen during the summer of 2008. Strain rates derived from our GPS data highlight several areas within the St. Elias orogen. The highest strain rates occur across Icy Bay and the western edge of the Malaspina Glacier. Rates there approach -1 microstrain/yr, a value higher than that observed in the Himalaya. Lower, but still significant, strain rates of about -0.2 microstrain/yr extend north from Icy Bay to the region surrounding Mt. St. Elias. The second major focus of compressive strain in the orogen is centered over the Yakataga fold-and-thrust belt. Strain rates there are in the range of -0.40 to -0.50 microstrain/yr. Little significant strain is seen across the Bagley icefield or to the north of that feature. These results suggest that most of the convergence across the St. Elias orogen is currently accommodated on structures located south of the Bagely icefield, specifically in the Icy Bay, upper Malaspina/Mt. St. Elias, and Yakataga fold-and-thrust belt regions. We use block modeling techniques to describe the tectonic elements of the St. Elias orogen and connect them with the tectonic regime in southeast Alaska. Our preliminary results indicate that a single thrust fault through Icy Bay cannot explain the data there; multiple NW and N directed thrust faults through Icy Bay, along the western edge of the Malaspina Glacier, and between Icy Bay and Mt. St. Elias are required. Over half of the relative convergence between the Yakutat block and southern Alaska may be accommodated by elastic strain accumulation on these faults.

Proterozoic orogens in southern Peninsular India: Contiguities and complexities

NASA Astrophysics Data System (ADS)

Chetty, T. R. K.; Santosh, M.

2013-12-01

The Precambrian terranes of southern Peninsular India have been central to discussions on the history of formation and breakup of supercontinents. Of particular interest are the Proterozoic high grade metamorphic orogens at the southern and eastern margins of the Indian shield, skirting the 3.4 Ga Dharwar craton which not only preserve important records of lower crustal processes and lithospheric geodynamics, but also carry imprints of the tectonic framework related to the assembly of the major Neoproterozoic supercontinents - Rodinia and Gondwana. These Proterozoic orogens are described as Southern Granulite Terrane (SGT) in the southern tip and the Eastern Ghats Mobile Belt (EGMB) in the eastern domains of the peninsula. The contiguity of these orogens is broken for a distance of ˜400 km and disappears in the Bay of Bengal. These orogens expose windows of middle to lower crust with well-preserved rock records displaying multiple tectonothermal events and multiphase exhumation paths.Recent studies in these orogens have led to the recognition of discrete crustal blocks or terranes separated by major shear zone systems, some of which represent collisional sutures. The SGT and EGMB carry several important features such as fold-thrust tectonics, regional granulite facies metamorphism of up to ultrahigh-temperature conditions in some cases, multiple P-T paths, development of lithospheric shear zones, emplacement of ophiolites, presence of alkaline and anorthositic complexes, development of crustal-scale "flower structures", transpressional strains, and reactivation tectonics. A heterogeneous distribution of different metamorphic and magmatic assemblages with distinct spatial and temporal strain variations in shaping the fabric elements in different blocks is identified. Both EGMB and SGT share a common transpressional deformation history during the latest Neoproterozoic characterized by the steepening of the initial low angle crustal scale structures leading to a subvertical grain conducive to reactivation tectonics. Our synthesis of the spatial distribution, geometry, kinematics and the transpressional strain of the shear zone systems provides insights into the tectono-metamorphic history of the Proterozoic orogens of southern India and their contiguity and complexities. Recent understanding of subduction, accretion and collisional history along these zones together with a long lived transpressional tectonic regime imply that these orogens witnessed identical tectonic regimes at different times in Earth history, although the major and common structural architecture was built during the final assembly of the Gondwana supercontinent.

Changing patterns of exhumation and denudation in front of an advancing crustal indenter, Tauern Window (Eastern Alps)

NASA Astrophysics Data System (ADS)

Favaro, S.; Handy, M. R.; Scharf, A.; Schuster, R.

2017-06-01

The changing shape of indenting crustal blocks during northward motion of the Adriatic microplate induced migration of Miocene doming and orogen-parallel extension of orogenic crust in the Tauern Window. New structural and kinematic data indicate that initial shortening of the Penninic nappe pile in the Tauern Window by upright folding and strike-slip faulting was transitional to coeval north-south shortening and east-west extension; the latter was accommodated by normal faulting at the eastern and western margins of the window. Retrodeforming these post-nappe structures in map view yields a map-view reconstruction of the orogenic crust back to 30 Ma, including the onset of pronounced indentation at 21 Ma. This model supports the notion that indentation involved approximately equal amounts of north-south shortening and orogen-parallel stretching and extrusion toward the Pannonian Basin, as measured from the indenter tip to the European foreland in the north and Austroalpine units in the east. Comparison of areal denudation of the orogenic crust before and after indentation indicates that erosion associated with upright folding was the primary agent of denudation, whereas extensional unroofing and limited erosion along normal faults at the eastern and western ends of the Tauern Window accounted for only about a third of the total denudation.

Subduction Orogeny and the Late Cenozoic Evolution of the Mediterranean Arcs

NASA Astrophysics Data System (ADS)

Royden, Leigh; Faccenna, Claudio

2018-05-01

The Late Cenozoic tectonic evolution of the Mediterranean region, which is sandwiched between the converging African and European continents, is dominated by the process of subduction orogeny. Subduction orogeny occurs where localized subduction, driven by negative slab buoyancy, is more rapid than the convergence rate of the bounding plates; it is commonly developed in zones of early or incomplete continental collision. Subduction orogens can be distinguished from collisional orogens on the basis of driving mechanism, tectonic setting, and geologic expression. Three distinct Late Cenozoic subduction orogens can be identified in the Mediterranean region, making up the Western Mediterranean (Apennine, external Betic, Maghebride, Rif), Central Mediterranean (Carpathian), and Eastern Mediterranean (southern Dinaride, external Hellenide, external Tauride) Arcs. The Late Cenozoic evolution of these orogens, described in this article, is best understood in light of the processes that govern subduction orogeny and depends strongly on the buoyancy of the locally subducting lithosphere; it is thus strongly related to paleogeography. Because the slow (4–10 mm/yr) convergence rate between Africa and Eurasia has preserved the early collisional environment, and associated tectonism, for tens of millions of years, the Mediterranean region provides an excellent opportunity to elucidate the dynamic and kinematic processes of subduction orogeny and to better understand how these processes operate in other orogenic systems.

Petrogenesis of Sveconorwegian magmatism in southwest Norway; constraints from zircon U-Pb-Hf-O and whole-rock geochemistry

NASA Astrophysics Data System (ADS)

Roberts, Nick M. W.; Slagstad, Trond; Parrish, Randall R.; Norry, Michael J.; Marker, Mogens; Horstwood, Matthew S. A.; Røhr, Torkil

2013-04-01

The Sveconorwegian orogen is traditionally interpreted as a Himalayan-scale continental collision, and the eastward continuation of the Grenville Province of Laurentia; however, it has recently been proposed that it represents an accretionary orogen without full-scale continental collision (Slagstad et al., in press). We suggest that magmatism is one of the key constraints to differentiate between different types of orogens; thus, detailed investigation of the timing and petrogenesis of the magmatic record is a requirement for better understanding of the Sveconorwegian orogen as a whole. Here, we present new U-Pb geochronology, zircon Hf-O isotope, and whole-rock geochemical data to constrain the petrogenesis of the early -Sveconorwegian Sirdal Magmatic Belt (SMB). The SMB is a batholithic-scale complex of intrusions that intrudes into most of the Rogaland-Hardangervidda Block in southwest Norway. Current age constraints put emplacement between ~1050 to 1020 Ma. New ages from the Suldal region indicate that the onset of SMB magmatism can be put back to 1070 Ma, which is some 30-50 Myrs prior to high-grade metamorphism. Average initial ɛHf signatures range from ~0 to 4; these overlap with later post-Sveconorwegian granites and with early-/pre-Sveconorwegian ferroan (A-type) granites. Average δ18O signatures range from ~5.7 to 8.7, except for one anomalous granite at ~11.6. The Hf-O signatures are compatible with a mixed mantle-crustal source. Crustal sources may include ~1500 Ma Telemarkian or ~1200 Ma juvenile crust. Hf-O bulk-mixing modelling using a 1500 Ma crustal source indicates >50 % mantle input. Although much further mapping and geochronological work is required, granitic magmatism appears to have persisted throughout much of the ~1100 to 900 Ma period that spans the Sveconorwegian orogen. This magmatism is consistently ferroan (i.e. dry); however, the SMB marks a clear transition to magnesian (i.e. wet) magmatism, with a return to ferroan magmatism at >990 Ma. We propose that this transition corresponds to subduction-driven dehydration-melting of the mantle, producing the SMB in a traditional continental volcanic arc environment. A large lower-crustal input is typical of continental arc batholiths (DeCelles et al., 2009). The interpretation of the SMB as a continental arc is key, but not exclusive, to an accretionary model for the Sveconorwegian orogen. The exact timing and setting of syn-/late-Sveconorwegian 990 to 940 Ma ferroan magmatism thus remains a critical link in the understanding of this orogen. Slagstad et al. (in press) A Non-Collisional, Accretionary Sveconorwegian Orogen. Terra Nova, DOI:10.1111/ter.120012 DeCelles et al. (2009) Cyclicity in Cordilleran orogenic systems. Nature Geoscience 2, 251-257.

Subduction and exhumation of a continental margin in the Scandinavian Caledonides: Insights from ultrahigh pressure metamorphism, late orogenic basins and 3D numerical modelling

NASA Astrophysics Data System (ADS)

Cuthbert, Simon

2017-04-01

The Scandinavian Caledonides (SC) represents a plate collision zone of Himalayan style and scale. Three fundamental characteristics of this orogen are: (1) early foreland-directed, tectonic transport and stacking of nappes; (2) late, wholesale reversal of tectonic transport; (3) ultrahigh pressure metamorphism of felsic crust derived from the underthrusting plate at several levels in the orogenic wedge and below the main thrust surface, indicating subduction of continental crust into the mantle. The significance of this for crustal evolution is the profound remodeling of continental crust, direct geochemical interaction of such crust and the mantle and the opening of accommodation space trapping large volumes of clastic detritus within the orogen. The orogenic wedge of the SC was derived from the upper crust of the Baltica continental margin (a hyper-extended passive margin), plus terranes derived from an assemblage of outboard arcs and intra-oceanic basins and, at the highest structural level, elements of the Laurentian margin. Nappe emplacement was driven by Scandian ( 430Ma) collision of Baltica with Laurentia, but emerging Middle Ordovician ages for diamond-facies metamorphism for the most outboard (or rifted) elements of Baltica suggest prior collision with an arc or microcontinent. Nappes derived from Baltica continental crust were subducted, in some cases to depths sufficient to form diamond. These then detached from the upper part of the down-going plate along major thrust faults, at which time they ceased to descend and possibly rose along the subduction channel. Subduction of the remaining continental margin continued below these nappes, possibly driven by slab-pull of the previously subducted Iapetus oceanic lithosphere and metamorphic densification of subducted felsic continental margin. 3D numerical modelling based upon a Caledonide-like plate scenario shows that if a continental corner or promontory enters the subduction zone, the continental margin descends to greater depths than for a simple orthogonal collision and its modelled thermal evolution is consistent with UHP metamorphic assemblages recorded in the southern part of the SC. Furthermore, a tear initiates at the promontary tip along the ocean-continent junction and propagates rapidly along the orogen. The buoyant upthrust of the subducted margin can then lead to reversal of the motion vector of the entire subducting continent, which withdraws the subducted lithospheric margin out of the subduction channel ("eduction"). Because of the diachroneity of slab failure, the continent also rotates, which causes the eduction vector to change azimuth over time. These model behaviours are consistent with the late orogenic structural evolution of the southern SC. However, during the final exhumation stage the crust may not have acted entirely coherently, as some eduction models propose: There is evidence that some inboard Baltica crust experienced late, shallow subduction before detaching as giant "flakes" that carried the orogenic wedge piggyback, forelandwards. Eduction and flake-tectonics could have operated coevally; the model system does not preclude this. Finally, the traction of a large educting (or extruding) mass of continental margin against the overlying orogenic wedge may have stretched and ruptured the wedge, resulting in opening of the late-orogenic Old Red Sandstone molasse basins.

Lateral thinking: 2-D interpretation of thermochronology in convergent orogenic settings

NASA Astrophysics Data System (ADS)

Batt, Geoffrey E.; Brandon, Mark T.

2002-05-01

Lateral motion of material relative to the regional thermal and kinematic frameworks is important in the interpretation of thermochronology in convergent orogens. Although cooling ages in denuded settings are commonly linked to exhumation, such data are not related to instantaneous behavior but rather to an integration of the exhumation rates experienced between the thermochronological 'closure' at depth and subsequent exposure at the surface. The short spatial wavelength variation of thermal structure and denudation rate typical of orogenic regions thus renders thermochronometers sensitive to lateral motion during exhumation. The significance of this lateral motion varies in proportion with closure temperature, which controls the depth at which isotopic closure occurs, and hence, the range of time and length scales over which such data integrate sample histories. Different chronometers thus vary in the fundamental aspects of the orogenic character to which they are sensitive. Isotopic systems with high closure temperature are more sensitive to exhumation paths and the variation in denudation and thermal structure across a region, while those of lower closure temperature constrain shorter-term behaviour and more local conditions. Discounting lateral motion through an orogenic region and interpreting cooling ages purely in terms of vertical exhumation can produce ambiguous results because variation in the cooling rate can result from either change in kinematics over time or the translation of samples through spatially varying conditions. Resolving this ambiguity requires explicit consideration of the physical and thermal framework experienced by samples during their exhumation. This can be best achieved through numerical simulations coupling kinematic deformation to thermal evolution. Such an approach allows the thermochronological implications of different kinematic scenarios to be tested, and thus provides an important means of assessing the contribution of lateral motion to orogenic evolution.

Continental origin of the Gubaoquan eclogite and implications for evolution of the Beishan Orogen, Central Asian Orogenic Belt, NW China

NASA Astrophysics Data System (ADS)

Saktura, Wanchese M.; Buckman, Solomon; Nutman, Allen P.; Belousova, Elena A.; Yan, Zhen; Aitchison, Jonathan C.

2017-12-01

The Gubaoquan eclogite occurs in the Paleozoic Beishan Orogen of NW China. Previously it has been interpreted as a fragment of subducted oceanic crust that was emplaced as a mélange within continental rocks. Contrary to this, we demonstrate that the Gubaoquan eclogite protolith was a Neoproterozoic basic dyke/sill which intruded into Proterozoic continental rocks. The SHRIMP Usbnd Pb zircon dating of the metamorphic rims of the Gubaoquan eclogite yields an age 466 ± 27 Ma. Subdued heavy rare earth element abundances and lack of negative Eu anomalies of the metamorphic zircon domains confirm that this age represents eclogite facies metamorphism. The host augen orthogneiss has a Usbnd Pb zircon age of 920 ± 14 Ma, representing the timing of crystallization of the granitic protolith. A leucogranitic vein which intrudes the eclogite has a Usbnd Pb zircon age of 424 ± 8.6 Ma. This granitic vein marks the end of high-grade metamorphism in this area. The overcomplication of tectonic history of the Beishan Orogen is partially caused by inconsistent classifications and nomenclature of the same rock units and arbitrary subdivisions of Precambrian blocks as individual microcontinents. In an attempt to resolve this, we propose a simpler model that involves the partial subduction of the northern passive margin of the Dunhuang Block beneath the active continental margin developing on the Mazongshan-Hanshan Block to the north. Ocean closure and continental collision during the Late Ordovician resulted in continental thickening and eclogite facies metamorphism recorded by the mafic dykes/sills (now the Gubaoquan eclogite). In the light of the new data, the tectonothermal evolution of the Beishan Orogen is reviewed and integrated with the evolution of the Central Asian Orogenic Belt.

Tectonic controls of Mississippi Valley-type lead-zinc mineralization in orogenic forelands

USGS Publications Warehouse

Bradley, D.C.; Leach, D.L.

2003-01-01

Most of the world's Mississippi Valley-type (MVT) zinc-lead deposits occur in orogenic forelands. We examine tectonic aspects of foreland evolution as part of a broader study of why some forelands are rich in MVT deposits, whereas others are barren. The type of orogenic foreland (collisional versus Andean-type versus inversion-type) is not a first-order control, because each has MVT deposits (e.g., Northern Arkansas, Pine Point, and Cevennes, respectively). In some MVT districts (e.g., Tri-State and Central Tennessee), mineralization took place atop an orogenic forebulge, a low-amplitude (a few hundred meters), long-wavelength (100-200 km) swell formed by vertical loading of the foreland plate. In the foreland of the active Banda Arc collision zone, a discontinuous forebulge reveals some of the physiographic and geologic complexities of the forebulge environment, and the importance of sea level in determining whether or not a forebulge will emerge and thus be subject to erosion. In addition to those on extant forebulges, some MVT deposits occur immediately below unconformities that originated at a forebulge, only to be subsequently carried toward the orogen by the plate-tectonic conveyor (e.g., Daniel's Harbour and East Tennessee). Likewise, some deposits are located along syn-collisional, flexure-induced normal and strike-slip faults in collisional forelands (e.g., Northern Arkansas, Daniel's Harbour, and Tri-State districts). These findings reveal the importance of lithospheric flexure, and suggest a conceptual tectonic model that accounts for an important subset of MVT deposits-those in the forelands of collisional orogens. The MVT deposits occur both in flat-lying and in thrust-faulted strata; in the latter group, mineralization postdated thrusting in some instances (e.g., Picos de Europa) but may have predated thrusting in other cases (e.g., East Tennessee).

Wireless Emergency Alerts: Trust Model Technical Report

DTIC Science & Technology

2014-02-01

Simulation=,.alse·/> <Observa1ionsl> <JNode> 4\\lode id=" M13 • Name="System Accessibilit)r Type=,_abelled~ <Partnt Nodtf> <SIJt.c>Sever~l Ouignett<l and...System_@lt3• Type~Continuous Interval"> <Pareni_Node> M13 əPareni_Nocte> <St.tn>.fnfinily • 0.0@0.0 • 10.0@10.0 • fnfinity<ISiates> <N PT> <NPT _Row

Timing of mafic magmatism in the Tapajós Province (Brazil) and implications for the evolution of the Amazon Craton: evidence from baddeleyite and zircon U Pb SHRIMP geochronology

NASA Astrophysics Data System (ADS)

Santos, João Orestes Schneider; Hartmann, Léo Afraneo; McNaughton, Neal Jesse; Fletcher, Ian Robert

2002-09-01

The precise timing and possible sources of the mafic rocks in the Amazon craton are critical for reconstruction of the Atlantica supercontinent and correlation of mafic magmatism worldwide. New SHRIMP U-Pb baddeleyite and zircon ages and the reinterpretation of 207 existing dates indicate one orogenic (Ingarana) and four postorogenic (Crepori, Cachoeira Seca, Piranhas, and Periquito) basaltic events in the Tapajós Province, south central Amazon craton. Orogenic gabbro dikes that host gold mineralization are 1893 Ma and interpreted as associated with the Ingarana gabbro intrusions of the bimodal calk-alkalic Parauari intrusive suite. The age of 1893 Ma can be used as a guide to discriminate older and mineralized orogenic dikes from younger and nonmineralized Crepori- and Cachoeira Seca-related mafic dikes. The baddeleyite U-Pb age of the postorogenic Crepori dolerite (gabbro-dolerite sills and dikes) is 1780±9 Ma, ˜150 my older than the ages provided by K-Ar. This value correlates well with the Avanavero tholeiitic intrusions in the Roraima group, in the northern part of the craton in Guyana, Venezuela, and Roraima in Brazil. Early Statherian tholeiitic magmatism was widespread not only in the Amazon craton, but also in the La Plata craton of southern South America, where it is known as the giant Piedra Alta swarm of Uruguay and the post-Trans-Amazonian dikes of Tandil in Argentina. The Cachoeira Seca troctolite represents laccoliths, Feixes, and São Domingos, whose baddeleyite U-Pb age is 1186±12 Ma, 120-150 my older than the known K-Ar ages. This age is comparable to other Stenian gabbroic rocks with alkalic affinity in the craton, such as the Seringa Formation in NE Amazonas and the basaltic flows of the Nova Floresta formation in Rondônia. Dolerite from the giant Piranhas dike swarm in the western Tapajós Province has a Middle Cambrian age (507±4 Ma, baddeleyite) and inherited zircons in the 2238-1229 Ma range. The Piranhas dikes fill extensional NNE and NE faults that are possibly related to an early rifting period before the Ordovician onset of the Amazon Basin sedimentation. Representative rocks of the Paleozoic Taiano magmatism of the northern Amazon craton were not detected in the Tapajós Province. Mesozoic dikes are widespread in the Amazon craton, related to Gondwana continental break-up with K-Ar ages in the 260-124 Ma range.

Structural evolution of the Irtysh Shear Zone: implication for the Late Paleozoic amalgamation of multiple arc systems in Central Asia

NASA Astrophysics Data System (ADS)

Li, Pengfei; Sun, Min; Rosenbaum, Gideon

2015-04-01

The NW-SE Irtysh Shear Zone represents a major tectonic boundary in the Central Asian Orogenic Belt, recording the amalgamation history between the peri-Siberian orogenic system and the Kazakhstan orogenic system. The structural evolution and geodynamics of this shear zone is still poorly documented. Here we present new structural data complemented by chronological data in an attempt to unravel the geodynamic significance of the Irtysh Shear Zone in the context of accretion history of the Central Asian Orogenic Belt. Our results show three episodes of deformation for the shear zone. D1 foliation is locally recognized in low strain area and recorded by garnet inclusions, whereas D2 is represented by a sub-horizontal fabric and related NW-SE lineation. D3 is characterized by a transpersonal deformation event, to form a series of NW-SE mylonitic belts with sinistral kinematics, and to overprint D2 fabric forming regional-scale NW-SE upright folds. A paragneiss sample from the shear zone yielded the youngest detrital zircon peaks in the late Carboniferous, placing a maximum age constraint on the deformation, which overlaps in time with the late Paleozoic collision between the Chinese Altai and the intraoceanic arc system of the East Junggar and West Junggar. We interpret three episodes of deformation to represent orogenic thickening (D1), collapse (D2) and thickening (D3) in response to this collisional event. Sinistral shearing (D3) together with the coeval dextral shearing in the Tianshan accommodate eastward extrusion of the Kazakhstan orogenic system during the late Paleozoic amalgamation of the Central Asian Orogenic Belt. Acknowledgements: This study was financially supported by the Major Basic Research Project of the Ministry of Science and Technology of China (Grant: 2014CB440801), Hong Kong Research Grant Council (HKU705311P and HKU704712P), National Science Foundation of China (41273048, 41273012) and a HKU CRCG grant. The work is a contribution of the Joint Laboratory of Chemical Geodynamics between HKU and CAS (Guangzhou Institute of Geochemistry), IGCP 592 and PROCORE France/Hong Kong Joint Research Scheme.

Geology and geochemistry of Carlin-type gold deposits in China

USGS Publications Warehouse

Rui-Zhong, H.; Wen-Chao, S.; Xian-Wu, B.; Guang-Zhi, T.; Hofstra, A.H.

2002-01-01

The Carlin-type gold deposits in China lie mostly near the margins of the Proterozoic Yangtze and Aba cratons. Submicron-sized gold in micron-sized arsenian pyrite is disseminated in fractured Cambrian through Triassic carbonaceous shale and carbonate rocks, and is associated with anomalous Hg, Sb, As, U, and Tl. Alteration typically includes silicification, argilization, and sulfidation. Aqueous fluid inclusions contain CO2, have relatively low temperatures of homogenization (250-150 ??C), and salinities (8-2 wt% equiv. NaCl) that typically decrease from early to later stages. The indicated pressures of 105-330x105 Pa correspond to depths in excess of 1.0 to 3.0 km, assuming hydrostatic conditions. The ??D values of fluid inclusions (-87 to -47%) and the calculated ??18 values for water in ore fluids (-2.1 to 16.2%) reflect interactions between meteoric water and sedimentary rocks. The ??13C values of calcite (-9 to 2%) and ??34S values of sulfides (-24 to 17%) suggest that C and S were derived from marine carbonate (and organic carbon) and diagenetic sulfides (and organic sulfur) in the vicinity of the deposits. Geologic relationships and geochronologic evidence indicate the deposits formed during a late phase of the Yanshanian orogeny (140-75 Ma). These gold deposits share much in common with the Carlin-type gold deposits in Nevada, USA. Both occur in carbonaceous, pyritic, sedimentary rocks deposited on extended margins of Precambrian cratons. The smaller Chinese deposits are generally in more siliceous rocks and the larger Nevada deposits in more calcareous rocks. In both countries, the host rocks prior to mineralization were affected by contractional deformation that produced many of the ore-controlling structures and the deposits do not show consistent spatial or genetic relationships with epizonal plutons. However, the Nevada deposits show broad spatial and temporal relationships with shifting patterns of calc-alkaline magmatism. The ore and alteration mineral assemblages, residence of gold, geochemical signatures, paragenetic sequence, and fluid inclusions are remarkably similar, which indicates that the deposits formed from low salinity, moderately acidic, CO2 and H2S-rich in the crust similar processes at relatively shallow levels in the crust (<5 km). However, the deposits in China are associated with large Hg, Sb, As, U, and Tl deposits, which may reflect higher background abundances of these elements. Stable isotopic data suggest meteoric water evolved to become ore fluids through interactions with sedimentary rocks, although contributions of volatiles or metals from deeper levels are present in some deposits in Nevada. In both countries, the deposits appear to have formed in an area of high paleothermal gradients after a change in stress regime during the later phases of orogenic activity.

Disclosing the Paleoarchean to Ediacaran history of the São Francisco craton basement: The Porteirinha domain (northern Araçuaí orogen, Brazil)

NASA Astrophysics Data System (ADS)

Silva, Luiz Carlos da; Pedrosa-Soares, Antonio Carlos; Armstrong, Richard; Pinto, Claiton Piva; Magalhães, Joana Tiago Reis; Pinheiro, Marco Aurélio Piacentini; Santos, Gabriella Galliac

2016-07-01

This geochronological and isotopic study focuses on one of the Archean-Paleoproterozoic basement domains of the São Francisco craton reworked in the Araçuaí orogen, the Porteirinha domain, Brazil. It also includes a thorough compilation of the U-Pb geochronological data related to the adjacent Archean and Rhyacian terranes from the São Francisco craton and Araçuaí orogen. The main target of this study is the TTG gneisses of the Porteirinha complex (Sample 1). The gneiss dated at 3371 ± 6 Ma unraveled a polycyclic evolution characterized by two metamorphic overprinting episodes, dated at 3146 ± 24 Ma (M1) and ca. 600 Ma (M2). The former (M1) is so far the most reliable evidence of the oldest metamorphic episode ever dated in Brazil. The latter (M2), in turn, is endemic in most of the exposed eastern cratonic margin within the Araçuaí orogen. Whole-rock Sm-Nd analysis from the gneiss provided a slightly negative εNd(t3370) = - 0.78 value, and a depleted mantle model (TDM) age of 3.5 Ga, indicating derivation mainly from the melting of a ca. 3.5 Ga tholeiitic source. Sample 2, a K-rich leuco-orthogneiss from the Rio Itacambiriçu Complex, was dated at 2657 ± 25 Ma and also presents a ca. 600 Ma M2 overprinting M2 age. The other two analyses were obtained from Rhyacian granitoids. Sample 3 is syn-collisional, peraluminous leucogranite from the Tingui granitic complex, showing a crystallization age of 2140 ± 14 Ma and strong post-crystallization Pb*-loss, also ascribed to the Ediacaran overprinting. Accordingly, it is interpreted as a correlative of the late Rhyacian (ca. 2150-2050 Ma) collisional stage of the Mantiqueira orogenic system/belt (ca. 2220-2000 Ma), overprinted by the Ediacaran collage. Sample 4 is a Rhyacian post-orogenic (post-collisional), mixed-source, peralkaline, A1-type suite, with a crystallization age of 2050 ± 10 Ma, presenting an important post-crystallization Pb*-loss related to Ediacaran collision. The focused region records some of the oldest magmatic and metamorphic events ever found in the São Francisco craton basement, a ca. 3.4 Ga TTG generation and ca. 3.1 Ga metamorphism, as well as two younger orogenic events: the Rhyacian (2.15-2.05 Ga), accretionary event, correlated to the Mineiro belt, and the Ediacaran Brasiliano overprinting, event imposed by the Araçuaí orogen.

Climate Variability and Surface Processes in Tectonically Active Orogens: Insights From the Southern Central Andes and the Northwest Himalaya

NASA Astrophysics Data System (ADS)

Strecker, M. R.; Bookhagen, B.

2008-12-01

The Southern Central Andes of NW Argentina and the NW Himalaya are important orographic barriers that intercept moisture-bearing winds associated with monsoonal circulation. Changes in both atmospheric circulation systems on decadal to millennial timescales fundamentally influence differences in the amount and location of rainfall in both orogens. In India, the eastern arm of the monsoonal circulation draws moisture from the Bay of Bengal and transports humid air masses along the southern Himalayan front to the northwest. There, at the end of the monsoonal conveyer belt, rainfall is diminished and moisture typically does not reach far into the orogen interior. Similar conditions apply to the NW Argentine Andes, which are located within the precipitation regime of the South American Monsoon. Here, pronounced local relief blocks humid air masses from the Amazon region, resulting in extreme gradients in rainfall that leave the orogen interior dry. However, during negative ENSO years (La Niña) and intensified Indian Summer Monsoon years, moisture penetrates farther into the Andean and Himalayan orogens, respectively. Structurally pre- conditioned valley systems may enhance this process and funnel moisture far into the orogen interior. The greater availability of moisture increases runoff, lateral scouring of mountin streams, and ultimately triggers intensified hillslope processes on decadal to centennial timescales. In both environments, the scenario of intensified present-day surface processes and rates is analogous to protracted episodes of enhanced mass removal from hillslopes via deep-seated landslides during the early Holocene and late Pleistocene. Apparently, these episodes were also associated with transient storage of voluminous conglomerates and lacustrine deposits in narrow intermontane basins. Subsequently, these deposits were incised, partly removed, and the fluvial systems adjusted themselves to the pre-depositional base levels through a readjustment and an increase in the fluvial efficiency and connectivity. Farther into the orogen interior, however, the episodically occurring increase in the availability of material may have contributed to the overall long-term reduction of relief due to reduced fluvial connectivity and the inability of rivers to evacuate material to the foreland. Pronounced coeval variations in erosion and depositional processes therefore emphasize the far-reaching impact of climate variability on the surface-process regime and hence provide insights into intensified episodes of landscape evolution in orogens. In addition, the present-day effects of climatic variability on the surface-process system may serve as a model for similar intensified processes that might be expected in a future global change scenario.

Some aspects of the role of rift inheritance on Alpine-type orogens

NASA Astrophysics Data System (ADS)

Tugend, Julie; Manatschal, Gianreto; Mohn, Geoffroy; Chevrot, Sébastien

2017-04-01

Processes commonly recognized as fundamental for the formation of collisional orogens include oceanic subduction, arc-continent and continent-continent collision. As collisional belts result from the closure of oceanic basins and subsequent inversion of former rifted margins, their formation and evolution may also in theory be closely interlinked with the initial architecture of the former rifted margins. This assumption is indeed more likely to be applicable in the case of Alpine-type orogens, mainly controlled by mechanical processes and mostly devoid of arc-related magmatism. More and more studies from present-day magma-poor rifted margins illustrate the complex evolution of hyperextended domains (i.e. severely thinned continental crust (<10 km) and/or exhumed serpentinized mantle with relatively minor magmatic additions) between unequivocal continental and oceanic domains. In this contribution, we compare the deep structure of the Pyrenean and Alpine belts to discuss some aspects of the relative role of rift-inherited hyperextension and collisional processes in building Alpine-type orogens. The Pyrenees and Western to Central Alps respectively result from the inversion of a Late Jurassic to Mid Cretaceous and an Early to Middle Jurassic rift system eventually floored by hyperextended crust, exhumed mantle and/or proto-oceanic crust. In spite of uncertainties on the initial width of the hyperextended and proto-oceanic domains, the rift-related pre-collisional architecture of the Alps shows many similarities with that proposed for the Pyrenees. Remnants of these domains occur in the internal parts of both orogens, but they are largely affected by orogeny-related deformation and show a HP-LT to HT-MP metamorphic overprint in the Alps as a result of a polyphase deformation history. Yet, recent high-resolution tomographic images across the Pyrenees (PYROPE) and the Alps (CIFALPS) reveal a surprisingly comparable present-day overall crustal and lithospheric structure. Based on the comparison between the two orogens we discuss: (1) the nature and depth of decoupling levels inherited from hyperextension; (2) the implications for restorations and interpretations of orogenic roots (former hyperextended domains vs. lower crust only); and (3) the nature and major role of buttresses in controlling the final stage of collisional processes. Eventually, we discuss the variability of the role of rift-inheritance in building Alpine-type orogens. The Pyrenees seem to represent one extreme, where rift-inheritance is important at different stages of collisional processes. In contrast, in the Alps the role of rift-inheritance is subtler, likely because of its more complex and polyphase compressional deformation history.

Penokean tectonics along a promontory-embayment margin in east-central Minnesota

USGS Publications Warehouse

Chandler, V.W.; Boerboom, Terrence; Jirsa, M.A.

2007-01-01

Recent geologic investigations in east-central Minnesota have utilized geophysical data, test drilling, and high-resolution geochronologic dating to produce a significantly improved map of a poorly exposed part of the 1880-1830 Ma Penokean orogen. These investigations have elucidated major changes in the structure of the orogen, as compared to its counterparts in northern Michigan and northwestern Wisconsin. Foreland basin, fold and thrust belt, and magmatic terrane components that are recognized to the east extend into east-central Minnesota, but they appear to be deflected southwards and truncated in proximity to Archean rocks of the Minnesota River Valley (MRV) subprovince. In contrast, the interior of the MRV subprovince to the southwest shows little sign of Penokean tectonism. In addition, the magmatic and metamorphic rocks of the internal zone of the orogen in east-central Minnesota are extensively invaded by ca. 1785-1770 Ma granitic rocks (the East-Central Minnesota Batholith), whereas, post-orogenic granites of this age occur sparingly to the east. These differences in orogenic structure may be related to their location near the juncture of an embayment (Becker embayment) and a promontory (MRV promontory) that formed the pre-Penokean continental margin. In this scenario, the MRV promontory, which at the surface consists chiefly of high-metamorphic-grade Mesoarchean gneisses, would have formed competent, high-standing crust that resisted deformation and did not host significantly thick continental margin sequences. In contrast, the part of the Becker Embayment adjoining the promontory would have involved relatively weak, low-standing crust that favored deposition of continental margin sequences and, during Penokean collision, would have accommodated tectonic loading of the cratonic margin through thin-skinned deformation. Thrusting of thick embayment sequences and possibly a block of Archean crust (Marshfield terrane) onto the embayment margin may have produced a greatly thickened crust that subsequently promoted crustal melting and generation of the geon 17 granites. Preliminary gravity and magnetic model studies of the present-day crust imply that rocks of the fold and thrust belt may sole out at 5-8 km depth; whereas, magmatic and high-metamorphic-grade rocks associated with the internal zone of the orogen could extend to mid-crustal depths. The tectonic model proposed here, implies that a collision between an embayment and an impinging continental mass may enhance tectonic thickening and subsequent generation of post-orogenic magmas. This and other hypotheses regarding the Penokean orogen need to be investigated further in the third dimension of depth, which will require a comprehensive suite of geophysical studies. ?? 2007 Elsevier B.V. All rights reserved.

Late Miocene remagnetization within the internal sector of the Northern Apennines, Italy

USGS Publications Warehouse

Aiello, I.W.; Hagstrum, J.T.; Principi, G.

2004-01-01

Paleomagnetic and geologic evidence indicates that Upper Jurassic radiolarian cherts of both the Tuscan Cherts Formation (continental margin, Tuscan Units) and the Monte Alpe Cherts Formation (oceanic crust, Ligurian Units) were remagnetized during Miocene orogenesis of the Northern Apennines of Italy. Characteristic overprint magnetizations with reversed polarities have been found over a large area within the internal sector of the Northern Apennines, including eastern Liguria, Elba Island and the Thyrrenian margin, and west of the Middle Tuscan Ridge. The reversed-polarity overprint (average direction: D=177??, I=-52??, ??95=15??) was most likely acquired during Late Miocene uplift and denudation of the orogenic chain, and thermochemical remagnetization was a probable consequence of increased circulation of orogenic fluids. Similarly, mostly reversed-polarity directions of magnetization have been found by other workers in overlying post-orogenic Messinian sediments (D=177??, I=-57??, ??95=3??), which show little counterclockwise (CCW) vertical-axis rotation with respect to stable Europe (-8??5??). The Monte Alpe Cherts sampled at sites in the external sector of the Northern Apennines, close to major tectonic features, have normal- polarity overprint directions with in situ W-SW declinations. Since the overlying post-orogenic Messinian sediments have not been substantially rotated about vertical axes, the evidence points to an earlier,pre-Late Miocene remagnetization in the external parts of the orogenic chain. ?? 2004 Elsevier B.V. All rights reserved.

Geodynamic processes and deformation in orogenic belts

NASA Astrophysics Data System (ADS)

Dennis, John G.; Jacoby, Wolfgang R.

1980-03-01

The development of geosynclines and orogenic belts is related to lithosphere convergence. Initial sediment accumulation implying subsidence, and volcanic activity implying extension and rise of geotherms, are in most cases followed by folding and thrusting suggesting compression and by uplift. In terms of recent analogs, sediment accumulation and crustal extension are characteristic of back-arc spreading; subsequent compression would indicate continent—continent collision; and rise of geotherms most likely requires localized thermal flow (convection) in the asthenosphere. These events are here shown to agree with Andrews and Sleep's (1974) numerical model of asthenosphere flow at converging plate margins. Orthogeosynclinal subsidence appears to be a consequence of subcrustal ablation and lithosphere extension and thinning in active marginal basins. Arc and Andean type magmatism mark the reappearance of ablated and transported, relatively low-density subcrustal material. Collision slows and eventually stops the local convection cell, resulting in local heat accumulation and hence high- T, low- P metamorphism and granitization while marginal basin (orthogeosynclinal) deposits are being compressed into Alpine style orogenic structures. Moreover, closing of the marginal basin leads to subsidiary subduction, which in turn may be responsible for some Alpine style structures. Oceanic trench deposits may become incorporated in orogenic zones, as high- P, low- T metamorphic belts (thalassogeosynclines). Dynamic uplift is a fundamental characteristic of orogeny. Most rising and sinking in orogenic zones can be linked to those asthenosphere processes which are a consequence of Andrews-Sleep convection.

Sedimentary conditions of Upper Permian volcano-clastic rocks of Ayan-Yrahskiy anticlinorium (Verhoyansk-Kolyma orogen)

NASA Astrophysics Data System (ADS)

Astakhova, Anna; Khardikov, Aleksandr

2013-04-01

Sedimentation conditions of upper Permian volcano-clastic rocks of Ayan-Yurakhsky anticlinorium are the reason of discussions between researchers. It is important to correctly solve this problem. Investigation allows us to conclude that upper Permian sediments was formed due to high rate deltaic sedimentation on shelf and continental slope of epicontinental sea basin. More than 45 outcrops of upper Permian sediments were described within Ayan-Yurakhsky anticlinorium. Termochemical and X-ray phase, lithological facies, stadial, paleogeographic and others were applied. Investigation allows to classify following types: tuffs, tuffites of andesites, andesi-dacites, sandstone tuffs, siltstone tuffs and claystone tuffs. Two facies were deliniated in the research area: 1) delta channel facies 2) epicontinental sea shelf edge and continental slope. Delta channel facies are located on the south-west part of Aian-Yrahskiy anticlinorium. It is composed of silty packsand and psammitic tuff-siltstone alternation and gravel-psammitic andesi-dacitic tuffute and tuff-breccia bands. Sediments have cross-bedding, through cross-bedding, curvilinear lamination structures. Facies occurred during high rate deltaic sedimentation on the shelf of epicontinental sea. Epicontinental sea shelf edge and continental slope facies are located on the south-west part. Sediments are represented by large thickness tuff-siltstone with tuff-sandstone, tuff-madstone, tuff, tuffite bands and lenses. Large number of submarine landslides sediments provide evidence that there was high angle sea floore environment. 30-50 m diametr eruption centers were described by authors during geological traverses. They are located in Kulu river basin. Their locations are limited by deep-seated pre-ore fault which extended along Ayan-Yurakhsky anticlinorium. U-Pb SHRIMP method showed that the average age of circons, taken from eruption centers, is Permian (256,3±3,7 ma). This fact confirms our emphasis that eruption centers were the centre of underwater effusive explosions which had been occurred in late Permian time. Gold ore deposits mainly localized in the south of Ayan-Yurakhsky anticlinorium and associated with upper Permian deltaic facies sediments. Taking into account lithological facies feature and volcanoclastic origin of sediments it is reasonable to suggest expelled-catagenesis model of gold mineralization. Gold was entered in sedimentary basin with piroclastic material. During catagenesis stage gold migrated from complex of shelf edge and continental slope to fan delta front complex in conjunction with expelled water. The emplacement of ore gold deposits related with upper Permian sediments can be successfully predicted, using this model and associated techniques.

Modes of orogen-parallel stretching and extensional exhumation in response to microplate indentation and roll-back subduction (Tauern Window, Eastern Alps)

NASA Astrophysics Data System (ADS)

Scharf, A.; Handy, M. R.; Favaro, S.; Schmid, S. M.; Bertrand, A.

2013-09-01

The Tauern Window exposes a Paleogene nappe stack consisting of highly metamorphosed oceanic (Alpine Tethys) and continental (distal European margin) thrust sheets. In the eastern part of this window, this nappe stack (Eastern Tauern Subdome, ETD) is bounded by a Neogene system of shear (the Katschberg Shear Zone System, KSZS) that accommodated orogen-parallel stretching, orogen-normal shortening, and exhumation with respect to the structurally overlying Austroalpine units (Adriatic margin). The KSZS comprises a ≤5-km-thick belt of retrograde mylonite, the central segment of which is a southeast-dipping, low-angle extensional shear zone with a brittle overprint (Katschberg Normal Fault, KNF). At the northern and southern ends of this central segment, the KSZS loses its brittle overprint and swings around both corners of the ETD to become subvertical, dextral, and sinistral strike-slip faults. The latter represent stretching faults whose displacements decrease westward to near zero. The kinematic continuity of top-east to top-southeast ductile shearing along the central, low-angle extensional part of the KSZS with strike-slip shearing along its steep ends, combined with maximum tectonic omission of nappes of the ETD in the footwall of the KNF, indicates that north-south shortening, orogen-parallel stretching, and normal faulting were coeval. Stratigraphic and radiometric ages constrain exhumation of the folded nappe complex in the footwall of the KSZS to have begun at 23-21 Ma, leading to rapid cooling between 21 and 16 Ma. This exhumation involved a combination of tectonic unroofing by extensional shearing, upright folding, and erosional denudation. The contribution of tectonic unroofing is greatest along the central segment of the KSZS and decreases westward to the central part of the Tauern Window. The KSZS formed in response to the indentation of wedge-shaped blocks of semi-rigid Austroalpine basement located in front of the South-Alpine indenter that was part of the Adriatic microplate. Northward motion of this indenter along the sinistral Giudicarie Belt offsets the Periadriatic Fault and triggered rapid exhumation of orogenic crust within the entire Tauern Window. Exhumation involved strike-slip and normal faulting that accommodated about 100 km of orogen-parallel extension and was contemporaneous with about 30 km of orogen-perpendicular, north-south shortening of the ETD. Extension of the Pannonian Basin related to roll-back subduction in the Carpathians began at 20 Ma, but did not affect the Eastern Alps before about 17 Ma. The effect of this extension was to reduce the lateral resistance to eastward crustal flow away from the zone of greatest thickening in the Tauern Window area. Therefore, we propose that roll-back subduction temporarily enhanced rather than triggered exhumation and orogen-parallel motion in the Eastern Alps. Lateral extrusion and orogen-parallel extension in the Eastern Alps have continued from 12 to 10 Ma to the present and are driven by northward push of Adria.

Textural and structural evidence for a predeformation hydrothermal origin of the Tungsten Queen Deposit, Hamme District, North Carolina

USGS Publications Warehouse

Foose, M.P.; Slack, J.F.; Casadevall, T.

1980-01-01

The Hamme tungsten district is composed of a series of steeply dipping quartz-wolframite veins in the Piedmont of North Carolina. Veins are concentrated near the border of the lower Paleozoic Vance County pluton, along its western contact with green-schist-facies metapelites and metavolcanic rocks of the Carolina slate belt. One of these quartz veins, the Snead-Walker, hosts the Tungsten Queen deposit. The vein is 0 to 10 m thick and trends N 35 degrees E for approximately 3,500 m through slate belt rocks and the granitic pluton. The deposit has been worked to a depth of nearly 520 m and contains eight en echelon ore lodes that plunge 42 degrees to 65 degrees between S 10 degrees E and S 10 degrees W. Ore lodes commonly are encased in thin lenses of quartz-sericite greisen. The principal ore mineral is huebnerite and is accompanied by scattered occurrences of pyrite, sphalerite, galena, chalcopyrite, and tetrahedrite. The gangue is predominantly quartz with minor amounts of fluorite, sericite, and carbonate.Studies of minor structures and mineral textures indicate that both the wall rock and the ore and gangue minerals within the vein have been deformed by at least two events. The first event produced relatively gentle, open, and shallow-plunging folds; later, an intense episode of right-lateral shearing developed steeply plunging, tight folds and numerous northeast-trending shears. This latter deformation also developed a prominent alignment of ore and gangue minerals oblique to the vein walls and may have formed the en echelon distribution of ore lodes.In relatively undeformed parts of the vein, clusters of euhedral huebnerite crystals are oriented perpendicular to vein layering. Some prismatic crystals have terminations with cappings of sulfides and in polished thin section show concentric growth zones. These features are similar to textures found in unmetamorphosed tungsten-bearing hydrothermal vein deposits such as those at Pasto Bueno, Peru; Carrock Fell, England; and Panasqueria, Portugal. The relationships of mineral textures and minor structures indicate that the Tungsten Queen deposit formed by open-space fillings of linear faults or fractures and was subsequently deformed by at least two episodes of folding and shearing.

Mother Lode: The Untapped Rare Earth Mineral Resources of Vietnam

DTIC Science & Technology

2013-11-01

Library of Congress, Congressional Research Service. Rare Earth Elements: The Global Supply Chain, 4. 14 Tse , Pui-Kwan. China’s Rare-Earth Industry...U.S. Geological Survey Open-File Report 2011–1042, 2. Figure 2. Global REO production, 1960-2011. Source: Tse , Pui-Kwan. China’s Rare-Earth...3 compiled from three sources: Tse , Pui-Kwan. China’s Rare-Earth Industry: U.S. Geological Survey Open-File Report 2011–1042, 4; Areddy, James T

Second Projet de Renforcement Institutionnel du Secteur Minier de la République Islamique de Mauritanie (PRISM-II) Phase V

USGS Publications Warehouse

Taylor, Cliff D.

2015-12-30

This report contains the USGS results of the PRISM-II Mauritania Minerals Project and is presented in cooperation with the Ministry of Petroleum, Energy, and Mines of the Islamic Republic of Mauritania. The Report is composed of separate chapters consisting of multidisciplinary interpretive reports with accompanying plates on the geology, structure, geochronology, geophysics, hydrogeology, geochemistry, remote sensing (Landsat TM and ASTER), and SRTM and ASTER digital elevation models of Mauritania. The syntheses of these multidisciplinary data formed the basis for additional chapters containing interpretive reports on 12 different commodities and deposit types known to occur in Mauritania, accompanied by countrywide mineral resource potential maps of each commodity/deposit type. The commodities and deposit types represented include: (1) Ni, Cu, PGE, and Cr deposits hosted in ultramafic rocks; (2) orogenic, Carlin-like, and epithermal gold deposits; (3) polymetallic Pb-Zn-Cu vein deposits; (4) sediment-hosted Pb-Zn-Ag deposits of the SEDEX and Mississippi Valley-type; (5) sediment-hosted copper deposits; ( 6) volcanogenic massive sulfide deposits; (7) iron oxide copper-gold deposits; (8) uranium deposits; (9) Algoma-, Superior-, and oolitic-type iron deposits; (10) shoreline Ti-Zr placer deposits; (11) incompatible element deposits hosted in pegmatites, alkaline rocks, and carbonatites, and; (12) industrial mineral deposits. Additional chapters include the Mauritanian National Mineral Deposits Database are accompanied by an explanatory text and the Mauritania Minerals Project GIS that contains all of the interpretive layers created by USGS scientists. Raw data not in the public domain may be obtained from the Ministry of Petroleum, Energy, and Mines in Nouakchott, Mauritania.

Arsenic species in weathering mine tailings and biogenic solids at the Lava Cap Mine Superfund Site, Nevada City, CA

PubMed Central

2011-01-01

Background A realistic estimation of the health risk of human exposure to solid-phase arsenic (As) derived from historic mining operations is a major challenge to redevelopment of California's famed "Mother Lode" region. Arsenic, a known carcinogen, occurs in multiple solid forms that vary in bioaccessibility. X-ray absorption fine-structure spectroscopy (XAFS) was used to identify and quantify the forms of As in mine wastes and biogenic solids at the Lava Cap Mine Superfund (LCMS) site, a historic "Mother Lode" gold mine. Principal component analysis (PCA) was used to assess variance within water chemistry, solids chemistry, and XAFS spectral datasets. Linear combination, least-squares fits constrained in part by PCA results were then used to quantify arsenic speciation in XAFS spectra of tailings and biogenic solids. Results The highest dissolved arsenic concentrations were found in Lost Lake porewater and in a groundwater-fed pond in the tailings deposition area. Iron, dissolved oxygen, alkalinity, specific conductivity, and As were the major variables in the water chemistry PCA. Arsenic was, on average, 14 times more concentrated in biologically-produced iron (hydr)oxide than in mine tailings. Phosphorous, manganese, calcium, aluminum, and As were the major variables in the solids chemistry PCA. Linear combination fits to XAFS spectra indicate that arsenopyrite (FeAsS), the dominant form of As in ore material, remains abundant (average: 65%) in minimally-weathered ore samples and water-saturated tailings at the bottom of Lost Lake. However, tailings that underwent drying and wetting cycles contain an average of only 30% arsenopyrite. The predominant products of arsenopyrite weathering were identified by XAFS to be As-bearing Fe (hydr)oxide and arseniosiderite (Ca2Fe(AsO4)3O3•3H2O). Existence of the former species is not in question, but the presence of the latter species was not confirmed by additional measurements, so its identification is less certain. The linear combination, least-squares fits totals of several samples deviate by more than ± 20% from 100%, suggesting that additional phases may be present that were not identified or evaluated in this study. Conclusions Sub- to anoxic conditions minimize dissolution of arsenopyrite at the LCMS site, but may accelerate the dissolution of As-bearing secondary iron phases such as Fe3+-oxyhydroxides and arseniosiderite, if sufficient organic matter is present to spur anaerobic microbial activity. Oxidizing, dry conditions favor the stabilization of secondary phases, while promoting oxidative breakdown of the primary sulfides. The stability of both primary and secondary As phases is likely to be at a minimum under cyclic wet-dry conditions. Biogenic iron (hydr)oxide flocs can sequester significant amounts of arsenic; this property may be useful for treatment of perpetual sources of As such as mine adit water, but the fate of As associated with natural accumulations of floc material needs to be assessed. PMID:21261983

Detection and mapping of hydrothermally altered rocks in the vicinity of the Comstock Lode, Virginia Range, Nevada, using enhanced Landsat images

USGS Publications Warehouse

Ashley, Roger P.; Goetz, A.F.H.; Rowan, L.C.; Abrams, M.J.

1979-01-01

The Virginia Range, immediately southeast of Reno, Nev., consists mainly of flows, breccias, and turfs of Miocene age. Most of these volcanic rocks are of intermediate composition; rhyodacite is the most common rock type. Basalt, rhyolite and rhyolite tuff, and tuffaceous sedimentary rocks of Miocene and Pliocene age also cover substantial areas in the range. Pre-Tertiary metasedimentary, metavolcanic, and granitic rocks are exposed in scattered inliers, mostly along the southern and eastern margins of the range. Several large areas and many small areas within the volcanic pile were subjected to hydrothermal alteration during and after the period of intermediate volcanic activity. Economic precious metal mineralization is spatially and temporally associated with the hydrothermal alteration in several areas. The most important deposit is the Comstock Lode, which produced 192 million troy ounces of silver and 8.3 million troy ounces of gold from epithermal veins (Bonham, 1969). The hydrothermally altered rocks include silicified, advanced argillic, montmorillonite-bearing argillic, and propylitic types. The first three types typically contain pyrite, and some propylitic rocks contain pyrite as well. Supergene oxidation of these pyritic rocks produces limonitic bleached rocks. The term 'limonite,' as used here, refers to any combination of the minerals hematite, goethite, and Jarosite. Where vegetation cover is sparse to moderate, these limonitic rocks are readily identified on Landsat images enhanced by the color-ratio composite technique developed by Rowan and others (1974), so the altered areas can be mapped. About 30 percent tree cover (here mainly pinyon pine) is sufficient to change the spectral signature of individual picture elements (pixels) enough so that limonitic materials can no longer be uniquely identified. As in all other areas where this technique has been applied, limonitic unaltered rocks with intermediate to high albedos have the same appearance on the color-ratio composite as limonitic altered rocks. This problem represents the most important limitation to the use of enhanced Landsat images for detection and mapping of hydrothermally altered rocks. Reflectance spectra of altered and unaltered rocks taken in the field in the Virginia Range show that most altered rocks have a conspicuous absorption band near 2.2 ?m produced by clay minerals or alunite, whereas unaltered rocks have no features in this spectral region. Thus spectral information for selected bands in the 1.1-2.5 ?m region may allow discrimination between limonitic altered and limonitic unaltered rocks (Rowan and others, 1977; Abrams and others, 1977; Rowan and Abrams, 1978). Another potential limitation is loss of spectral information on slopes with low effective sun angle. Although a minor problem in the Virginia Range, loss of information sufficient to preclude identification of limonitic altered rocks occurs with effective sun angle lower than 20-25 degrees. Thus, even at moderate latitudes substantial parts of areas with high topographic relief may be lost to observation.

Arsenic species in weathering mine tailings and biogenic solids at the Lava Cap Mine Superfund Site, Nevada City, CA.

PubMed

Foster, Andrea L; Ashley, Roger P; Rytuba, James J

2011-01-24

A realistic estimation of the health risk of human exposure to solid-phase arsenic (As) derived from historic mining operations is a major challenge to redevelopment of California's famed "Mother Lode" region. Arsenic, a known carcinogen, occurs in multiple solid forms that vary in bioaccessibility. X-ray absorption fine-structure spectroscopy (XAFS) was used to identify and quantify the forms of As in mine wastes and biogenic solids at the Lava Cap Mine Superfund (LCMS) site, a historic "Mother Lode" gold mine. Principal component analysis (PCA) was used to assess variance within water chemistry, solids chemistry, and XAFS spectral datasets. Linear combination, least-squares fits constrained in part by PCA results were then used to quantify arsenic speciation in XAFS spectra of tailings and biogenic solids. The highest dissolved arsenic concentrations were found in Lost Lake porewater and in a groundwater-fed pond in the tailings deposition area. Iron, dissolved oxygen, alkalinity, specific conductivity, and As were the major variables in the water chemistry PCA. Arsenic was, on average, 14 times more concentrated in biologically-produced iron (hydr)oxide than in mine tailings. Phosphorous, manganese, calcium, aluminum, and As were the major variables in the solids chemistry PCA. Linear combination fits to XAFS spectra indicate that arsenopyrite (FeAsS), the dominant form of As in ore material, remains abundant (average: 65%) in minimally-weathered ore samples and water-saturated tailings at the bottom of Lost Lake. However, tailings that underwent drying and wetting cycles contain an average of only 30% arsenopyrite. The predominant products of arsenopyrite weathering were identified by XAFS to be As-bearing Fe (hydr)oxide and arseniosiderite (Ca2Fe(AsO4)3O3•3H2O). Existence of the former species is not in question, but the presence of the latter species was not confirmed by additional measurements, so its identification is less certain. The linear combination, least-squares fits totals of several samples deviate by more than ± 20% from 100%, suggesting that additional phases may be present that were not identified or evaluated in this study. Sub- to anoxic conditions minimize dissolution of arsenopyrite at the LCMS site, but may accelerate the dissolution of As-bearing secondary iron phases such as Fe3+-oxyhydroxides and arseniosiderite, if sufficient organic matter is present to spur anaerobic microbial activity. Oxidizing, dry conditions favor the stabilization of secondary phases, while promoting oxidative breakdown of the primary sulfides. The stability of both primary and secondary As phases is likely to be at a minimum under cyclic wet-dry conditions. Biogenic iron (hydr)oxide flocs can sequester significant amounts of arsenic; this property may be useful for treatment of perpetual sources of As such as mine adit water, but the fate of As associated with natural accumulations of floc material needs to be assessed.

Rodinia: Supercontinent's poster child or problem child?

NASA Astrophysics Data System (ADS)

Cawood, Peter; Hawkesworth, Chris

2014-05-01

Earth's rock record extending from 1.7 to 0.75 Ga, that period encompassing the entire Rodinian supercontinent cycle and the latter part of Nuna cycle, and corresponding with Earth's Middle Age, is characterized by environmental, evolutionary and lithospheric stability that contrasts with the dramatic changes in preceding and succeeding eras. The period is marked by a paucity of passive margins, an absence of a significant Sr anomaly in the paleoseawater record or in the epsilon Hf(t) in detrital zircon, a lack of orogenic gold and volcanic-hosted massive sulfide deposits, and an absence of glacial deposits and of iron formations. In contrast, anorthosites and kindred bodies are well developed and major pulses of Mo and Cu mineralization, including the world's largest examples of these deposits, are features of this period. These trends are attributed to the combined effects of lithospheric behavior related to secular cooling of the mantle and a relatively stable continental assemblage that was initiated during assembly of the Nuna supercontinent by ~1.7 Ga and continued until breakup of its closely related successor, Rodinia, around 0.75 Ga. The overall low abundance of passive margins within this timeframe is consistent with a stable continental configuration, which also provided a framework for environmental and evolutionary stability. A series of convergent margin accretionary orogens developed along the margin of the supercontinent as evidenced by rock sequences preserved in dispersed fragments in Australia, Antarctica, Amazonia, Baltica and Laurentia. Abundant anorthosites and related rocks developed inboard of the plate margin. Their temporal distribution appears to link with the secular cooling of the mantle in which the overlying continental lithosphere was then strong enough to be thickened, during either low angle subduction or post-subduction collision, and to support the emplacement of large plutons into the crust, yet the underlying mantle was still warm enough to result in widespread melting of the lower thickened crust.

Constraints of C-O-S isotope compositions and the origin of the Ünlüpınar volcanic-hosted epithermal Pb-Zn ± Au deposit, Gümüşhane, NE Turkey

NASA Astrophysics Data System (ADS)

Akaryali, Enver; Akbulut, Kübra

2016-03-01

The Eastern Pontide Orogenic Belt (EPOB) constitutes one of the best examples of the metallogenic provinces in on the Alpine-Himalayan belt. This study focuses on the genesis of the Ünlüpınar Pb-Zn ± Au deposit in the southern part of the Eastern Pontide Orogenic Belt. The main lithological units in the study area are the Early Carboniferous Kurtoğlu Metamorphic Complex the Late Carboniferous Köse Granitoid and the Early-Middle Jurassic Şenköy Formation. The studied deposit is hosted by the Şenköy Formation, which consists predominantly of basaltic-andesitic rocks and associated pyroclastic rocks that are calc-alkaline in composition. Silicic, sulfidic, argillic, chloritic, hematitic, carbonate and limonite are the most obvious alteration types observed in the deposit site. Ore microscopy studies exhibit that the mineral paragenesis in deposits includes pyrite, chalcopyrite, sphalerite, galena, gold, quartz and calcite. Electron microprobe analyses conducted on sphalerite indicate that the Zn/Cd ratio varies between 84 and 204, and these ratios point at a hydrothermal deposit related to granitic magmas. Fluid inclusion studies in calcite and quartz show that the homogenization temperature of the studied deposit ranges between 90-160 °C and 120-330 °C respectively. The values of sulfur isotope analysis of pyrite, sphalerite and galena minerals vary between 1.6‰ and 5.7‰, and the results of oxygen and carbon isotope analysis range between 8.4‰ and 18‰ and -5‰ and -3.6‰, respectively. The average formation temperature of the ore was calculated as 264 °C with a sulfur isotope geothermometer. All of the data indicate that the Ünlüpınar deposit is an epithermal vein-type mineralization that was formed depending on the granitic magmatism.

No erosional control on the lateral growth of the Alps

NASA Astrophysics Data System (ADS)

Rosenberg, C. L.; Berger, A.

2009-04-01

On the base of literature data, we estimated the paleowidth of the Central Alps and the changing location of the inferred active fronts of the orogen from the Oligocene to the present. These compilations indicate that the absolute change of width, defined as the distance between the most external, but not necessarily active thrusts of the orogen was modest, amounting to less than 15 %, from 32 Ma to the present. This value lies within the error of estimate, and hence it is no sound evidence for lateral growth or retreat of the orogen. On the other hand the width of the active orogen, defined as the distance between the most external active thrusts, did increase in the early Miocene. This increase started already in the Oligocene as also concluded on the base of sedimentological findings, suggesting a continuous growth of thrusts through the Oligocene-Early Miocene interval (e.g. Schumacher et al., 1996). In the Late Miocene the active width of the Southern Alps decreased, as documented by a pre-Messinian out-of-sequence phase of thrusting (Lecco thrust; Schönborn, 1992) younger than the Milan Belt (Schönborn 1992). Increasing erosion rates are expected to reduce the width of the orogen, whereas decreasing rates are expected to increase its width (Beaumont et al., 1992). Therefore, following the example of previous investigations (Schlunegger et al., 2001; Schlunegger and Simpson, 2002; Willett et al., 2006) we compare the reconstructed changes of width of the Alps with the depositional budgets of the Alpine foreland basins (Kuhlemann, 2000) inferred to be a proxy for the erosion rates of the Alpine belt. This comparison shows that the most significant increases in erosion efficiency do not lead to a decrease in the active width of the orogen. This is indicated by the pronounced foreland-directed growth of the Alps after the Messinian, i.e., during the phase of greatest increase in the erosion rates of the orogen. The best regional examples are the northward shift of the deformation front of the Jura Mountains (Nivière and Winter, 2000; Giamboni et al., 2004; Madritsch et al., 2008), the westward shift of the Chaines Subalpines (Lickorisch and Ford, 1998) on the western side of the orogen, and the southward migration of the active front in the eastern sector of the Southern Alps (Benedetti et al., 2000). The reduced erosional efficiency of the orogen, which started at 17 Ma and continued until the Messinian (Kuhlemann, 2000) also did not coincide to a phase of lateral growth of the orogen. Out-of sequence thrusting in the Southern Alps (Schönborn, 1992) reduced the width of the chain well before the Messinian crisis, i.e. during the phase of fading erosion efficiency. Therefore, erosion does not seem to have been the prime control on the changes of width of the orogen. Alternatively, the effect of erosion on the lateral growth of the orogen can be tested by comparing the timing and the type of shifts of the active deformation front from different parts of the orogen. If climate changes are inferred to control changes in the erosional efficiency of the Alps (Willett et al., 2006), the tectonic response to a given change of climate is expected to be coeval and of similar type in all parts of the chain. This is especially true for an orogen as small as the Alps, whose different portions are all affected by the same climatic conditions. However, the mode of exhumation of the Eastern Alps is very different than that of the Western and Central Alps. The exhumation front progressively shifted towards the foreland in the latter case, whereas it remained focused in the axial zone of the orogen in the former case (Rosenberg and Berger, 2009). As a consequence, a broad metamorphic belt, with cooling ages younging from the axial zone towards the foreland formed in the western Alps, and a narrow metamorphic belt with cooling ages younging towards the axial zone of the orogen formed in the Eastern Alps. These first-order differences indicate that processes other than erosion and climate change controlled the migration of the deformation and exhumation fronts of the Alps. References: Beaumont, C., P. Fullsack, and J. Hamilton (1992). In: K.R. McKlay (ed.), Thrust Tectonics, pp. 19-31, Chapman and Hall, New York. Benedetti, L., P. Tapponnier, G.C.P. King, B. Meyer, and I. Manighetti (2000). J. Geophys. Res., 105, 739-766. Giamboni, M., K. Ustaszewski, S.M. Schmid, M. Schumacher, and A. Wetzel (2004). Int. J. Earth Sci., 93, 207-223. Kuhlemann, J. (2000). Mem. Sci. Geol. Padova, 52, 1-91. Lickorisch, W. H., Ford, M., (1998). In: Mascle et al. (eds.), Cenozoic foreland basin of Western Europe, Geol. Soc. London, Spec. Publ., 134, 189-211. Madritsch, H., S. M. Schmid, and O. Fabbri (2008). Tectonics, 27, TC5005, doi:10.1029/2008TC002282 Rosenberg, C.L. and Berger, A. (2009).Geophysical Research Abstracts, Vol. 11, EGU2009-2906, 2009 EGU General Assembly 2009Schlunegger, F., J. Melzer, and G.E. Tucker (2001). Int. J. Earth Sci., 90, 484-499. Schlunegger, F., and G. Simpson (2002), Geology 30, 907-910. Schönborn, G. (1992) Mem. Scienze Sci. Geolog. Padova, 44, 229-393. Schumacher, M.E., G. Schönborn, D. Bernoulli, and H.P. Laubscher (1996), In: O.A. Pfiffner et al. (eds.), Deep Structure of the Swiss Alps — Results from the National Research Program 20 (NRP 20), 186-204, Birkhäuser, Basel. Willett, S.D., F. Schlunegger, and V. Picotti (2006). Geology, 34, 613-616.

Incorporation of New and Old Tectonics Concepts Into a Modern Course in Tectonics.

ERIC Educational Resources Information Center

Hatcher, Robert D., Jr.

1983-01-01

Describes a graduate-level tectonics course which includes the historical basis for modern tectonics concepts and an in-depth review of pros/cons of plate tectonics. Tectonic features discussed include: ocean basins; volcanic arcs; continental margins; continents; orogenic belts; foreland fold and thrust belts; volcanic/plutonic belts of orogens;…

An isotopic perspective on growth and differentiation of Proterozoic orogenic crust: From subduction magmatism to cratonization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, Simon P.; Korhonen, Fawna J.; Kirkland, Christopher L.

The in situ chemical differentiation of continental crust ultimately leads to the long-term stability of the continents. This process, more commonly known as ‘cratonization’, is driven by deep crustal melting with the transfer of those melts to shallower regions resulting in a strongly chemically stratified crust, with a refractory, dehydrated lower portion overlain by a complementary enriched upper portion. Since the lower to mid portions of continental crust are rarely exposed, investigation of the cratonization process must be through indirect methods. In this study we use in situ Hf and O isotope compositions of both magmatic and inherited zircons frommore » several felsic magmatic suites in the Capricorn Orogen of Western Australia to highlight the differentiation history (i.e. cratonization) of this portion of late Archean to Proterozoic orogenic crust. The Capricorn Orogen shows a distinct tectonomagmatic history that evolves from an active continental margin through to intracratonic reworking, ultimately leading to thermally stable crust that responds similarly to the bounding Archean Pilbara and Yilgarn Cratons.« less

An introduction to the tectonophysics special issue (Geodynamics and Environment in East Asia, GEEA 2014)

NASA Astrophysics Data System (ADS)

Siame, Lionel L.; Lee, Jian-Cheng

2016-12-01

In Taiwan, tectonic and climatic processes are exacerbated, involving deformation and erosion rates that are among the highest ones in the world. The combination of these internal and external forcing factors results in frequent and severe natural hazards in many aspects, including earthquake, landslide, mud/debris flows, floods, tsunamis, etc., which became a real concern not only for in the Taiwanese society but also applying for many countries or areas in the world. Within this general context, Taiwan orogen is thus a quite exceptional natural laboratory to study the coupling relationships between internal and external processes, and thus better cope with implications on society and economics. From a fundamental science point of view, Taiwan orogen has long been recognized as one of the best places in the world to study mountain building processes including lithosphere and crustal deformation, mechanisms of mountain building, seismic cycle and seismic behaviour of active faults. In fact, Taiwan orogen is probably one of the rare mountain belts where processes of mountain building can be apprehended from oceanic to continental subduction and post-orogenic extension.

A cryptic Gondwana-forming orogen located in Antarctica.

PubMed

Daczko, Nathan R; Halpin, Jacqueline A; Fitzsimons, Ian C W; Whittaker, Joanne M

2018-05-30

The most poorly exposed and least understood Gondwana-forming orogen lies largely hidden beneath ice in East Antarctica. Called the Kuunga orogen, its interpolation between scattered outcrops is speculative with differing and often contradictory trends proposed, and no consensus on the location of any sutures. While some discount a suture altogether, paleomagnetic data from Indo-Antarctica and Australo-Antarctica do require 3000-5000 km relative displacement during Ediacaran-Cambrian Gondwana amalgamation, suggesting that the Kuunga orogen sutured provinces of broadly Indian versus Australian affinity. Here we use compiled data from detrital zircons offshore of East Antarctica that fingerprint two coastal subglacial basement provinces between 60 and 130°E, one of Indian affinity with dominant ca. 980-900 Ma ages (Indo-Antarctica) and one of Australian affinity with dominant ca. 1190-1140 and ca. 1560 Ma ages (Australo-Antarctica). We combine this offshore compilation with existing and new onshore U-Pb geochronology and previous geophysical interpretations to delimit the Indo-Australo-Antarctic boundary at a prominent geophysical lineament which intersects the coast east of Mirny at ~94°E.

Post-collisional magmatism in the central East African Orogen: The Maevarano Suite of north Madagascar

NASA Astrophysics Data System (ADS)

Goodenough, K. M.; Thomas, R. J.; De Waele, B.; Key, R. M.; Schofield, D. I.; Bauer, W.; Tucker, R. D.; Rafahatelo, J.-M.; Rabarimanana, M.; Ralison, A. V.; Randriamananjara, T.

2010-04-01

Late tectonic, post-collisional granite suites are a feature of many parts of the Late Neoproterozoic to Cambrian East African Orogen (EAO), where they are generally attributed to late extensional collapse of the orogen, accompanied by high heat flow and asthenospheric uprise. The Maevarano Suite comprises voluminous plutons which were emplaced in some of the tectonostratigraphic terranes of northern Madagascar, in the central part of the EAO, following collision and assembly during a major orogeny at ca. 550 Ma. The suite comprises three main magmatic phases: a minor early phase of foliated gabbros, quartz diorites, and granodiorites; a main phase of large batholiths of porphyritic granitoids and charnockites; and a late phase of small-scale plutons and sheets of monzonite, syenite, leucogranite and microgranite. The main phase intrusions tend to be massive, but with variably foliated margins. New U-Pb SHRIMP zircon data show that the whole suite was emplaced between ca. 537 and 522 Ma. Geochemically, all the rocks of the suite are enriched in the LILE, especially K, and the LREE, but are relatively depleted in Nb, Ta and the HREE. These characteristics are typical of post-collisional granitoids in the EAO and many other orogenic belts. It is proposed that the Maevarano Suite magmas were derived by melting of sub-continental lithospheric mantle that had been enriched in the LILE during earlier subduction events. The melting occurred during lithospheric delamination, which was associated with extensional collapse of the East African Orogen.

Linkages Between Critical Wedges and Crustal Channels Using 2-D Coupled Thermomechanical Finite Element Models: Implications for Himalayan Orogenic Evolution

NASA Astrophysics Data System (ADS)

Sparks, S. A.; Thigpen, J. R.

2017-12-01

In continental tectonics, questions remain regarding the dominant mechanisms of shortening accommodation during orogen evolution. Two quantitatively-supported models, critical wedge and channel flow, have been applied to the Himalaya and proposed for other large collisional systems. These two models represent fundamentally distinct mechanisms for accommodating shortening in collisional systems and until recently have been viewed as mutually exclusive. While there remains support for these mechanisms being incompatible end-members, in more recent studies it has been proposed that either: (1) both geodynamic mechanisms may operate simultaneously yet in spatially distinct parts of the larger composite orogenic system or (2) both mechanisms are present yet they operate at temporally distinct intervals, wherein the orogen progressively develops through stages dominated by mid-crustal channel flow followed by shallow thrust stacking and duplex development. In both scenarios, the mechanism active at each stage in orogen evolution is presumably dependent upon local to regional scale rheological conditions (as a function of orogen dynamic and thermal evolution) that are likely to be transient in both space and time. However, questions regarding the dynamic, mechanical, and thermal-kinematic relationships of such a system remain. Also, while field observations and deformation records derived from analyses of transects within the Himalaya can be interpreted in such a way to be consistent with a unified model, numerical models that predict the behavior of interactions between the end-member models have - until now - not existed. Here, we present results from 2-D coupled thermomechanical finite-element numerical experiments that examine the necessary conditions for mechanical compatibility between the channel and critical wedge by focusing on the role of rheology. These model results will eventually allow us to make preliminary comparisons between model-derived stress predictions and differential stress values determined from quartz paleopiezometry from samples collected in the Langtang and Annapurna regions of central Nepal.

Lead mobilization during tectonic reactivation of the western Baltic Shield

DOE Office of Scientific and Technical Information (OSTI.GOV)

Romer, R.L.; Wright, J.E.

Lead isotope data from sulfide deposits of the western part of the Baltic Shield define mixing lines in the [sup 206]Pb/[sup 204]Pb-[sup 207]Pb/[sup 204]Pb diagram. Lead from two types of sulfide deposits have been investigated: (1) Exhalative and volcanogenic deposits that are syngenetic with their host rocks; and (2) vein deposits. The syngenetic deposits locally show a very wide range of lead isotopic compositions that reflect a variable addition of highly radiogenic lead, while the vein deposits, although they have radiogenic lead isotopic compositions, exhibit only limited isotopic variations. In different provinces of the shield, both types of deposits fallmore » on the same lead mixing array. The slope of the lead mixing lines varies as a function of the age of basement rocks and the age of the tectonic event which produced the lead mobilization and therefore relates the source rock age with the age of lead mobilization. Calculated mixing ages fall into several short time periods that correspond either to orogenic events or to major phases of continental rifting. The orogenic events are the ca 360--430 Ma Caledonian, ca 900--1100 Ma Sveconorwegian, and the ca 1800--1900 Ma Svecofennian orogenic cycles. The rifting events correspond to the formation of the ca 280 Ma Oslo rift and the Ordovician (ca 450 Ma) graben system in the area of the present Gulf of Bothnia. Each mixing age indicates that lead was mobilized, probably as a consequence of mild thermal disturbances, and that the crust was permeable to lead migration. The data show that the geographic distribution of sulfide deposits with highly radiogenic lead isotopic compositions coincides with old graben systems, orogenic belts, and orogenic forelands on the Baltic Shield. The ages of vein deposits and their geographic distribution demonstrate multiple tectonic reactivation of the interior of the Baltic Shield in response to orogenic events at its margin. 68 refs., 6 refs., 4 tabs.« less

The evolution of a Gondwanan collisional orogen: A structural and geochronological appraisal from the Southern Granulite Terrane, South India

NASA Astrophysics Data System (ADS)

Plavsa, Diana; Collins, Alan S.; Foden, John D.; Clark, Chris

2015-05-01

Gondwana amalgamated along a suite of Himalayan-scale collisional orogens, the roots of which lace the continents of Africa, South America, and Antarctica. The Southern Granulite Terrane of India is a generally well-exposed, exhumed, Gondwana-forming orogen that preserves a record of the tectonic evolution of the eastern margin of the East African Orogen during the Ediacaran-Cambrian (circa 600-500 Ma) as central Gondwana formed. The deformation associated with the closure of the Mozambique Ocean and collision of the Indian and East African/Madagascan cratonic domains is believed to have taken place along the southern margin of the Salem Block (the Palghat-Cauvery Shear System, PCSS) in the Southern Granulite Terrane. Investigation of the structural fabrics and the geochronology of the high-grade shear zones within the PCSS system shows that the Moyar-Salem-Attur shear zone to the north of the PCSS system is early Paleoproterozoic in age and associated with dextral strike-slip motion, while the Cauvery shear zone (CSZ) to the south of the PCSS system can be loosely constrained to circa 740-550 Ma and is associated with dip-slip dextral transpression and north side-up motion. To the south of the proposed suture zone (the Cauvery shear zone), the structural fabrics of the Northern Madurai Block suggest four deformational events (D1-D4), some of which are likely to be contemporaneous. The timing of high pressure-ultrahigh temperature metamorphism and deformation (D1-D3) in the Madurai Block (here interpreted as the southern extension of Azania) is constrained to circa 550-500 Ma and interpreted as representing collisional orogeny and subsequent orogenic collapse of the eastern margin of the East African Orogen. The disparity in the nature of the structural fabrics and the timing of the deformation in the Salem and the Madurai Blocks suggest that the two experienced distinct tectonothermal events prior to their amalgamation along the Cauvery shear zone during the Ediacaran/Cambrian.

Hillslope response to knickpoint migration in the Southern Appalachians: Implications for the evolution of post-orogenic landscapes

USGS Publications Warehouse

Wegmann, S.F.G.; Franke, K.L.; Hughes, S.; Lewis, R.Q.; Lyons, N.; Paris, P.; Ross, K.; Bauer, J.B.; Witt, A.C.

2011-01-01

The southern Appalachians represent a landscape characterized by locally high topographic relief, steep slopes, and frequent mass movement in the absence of significant tectonic forcing for at least the last 200 Ma. The fundamental processes responsible for landscape evolution in a post-orogenic landscape remain enigmatic. The non-glaciated Cullasaja River basin of south-western North Carolina, with uniform lithology, frequent debris flows, and the availability of high-resolution airborne lidar DEMs, is an ideal natural setting to study landscape evolution in a post-orogenic landscape through the lens of hillslope-channel coupling. This investigation is limited to channels with upslope contributing areas >2.7 km2, a conservative estimate of the transition from fluvial to debris-flow dominated channel processes. Values of normalized hypsometry, hypsometric integral, and mean slope vs elevation are used for 14 tributary basins and the Cullasaja basin as a whole to characterize landscape evolution following upstream knickpoint migration. Results highlight the existence of a transient spatial relationship between knickpoints present along the fluvial network of the Cullasaja basin and adjacent hillslopes. Metrics of topography (relief, slope gradient) and hillslope activity (landslide frequency) exhibit significant downstream increases below the current position of major knickpoints. The transient effect of knickpoint-driven channel incision on basin hillslopes is captured by measuring the relief, mean slope steepness, and mass movement frequency of tributary basins and comparing these results with the distance from major knickpoints along the Cullasaja River. A conceptual model of area-elevation and slope distributions is presented that may be representative of post-orogenic landscape evolution in analogous geologic settings. Importantly, the model explains how knickpoint migration and channel- hillslope coupling is an important factor in tectonically-inactive (i.e. post-orogenic) orogens for the maintenance of significant relief, steep slopes, and weathering-limited hillslopes. ?? 2011 John Wiley & Sons, Ltd.

Early tectonic evolution of the Thomson Orogen in Queensland inferred from constrained magnetic and gravity data

NASA Astrophysics Data System (ADS)

Spampinato, Giovanni P. T.; Betts, Peter G.; Ailleres, Laurent; Armit, Robin J.

2015-05-01

The crustal architecture as well as the kinematic evolution of the Thomson Orogen in Queensland is poorly resolved because the region is concealed under thick Phanerozoic sedimentary basins and the basement geology is known from limited drill holes. Combined potential field and seismic interpretation indicates that the Thomson Orogen is characterized by prominent regional NE- and NW-trending structural grain defined by long wavelength and low amplitude geophysical anomalies. The 'smooth' magnetic signature is interpreted to reflect deeply buried source bodies in the mid- to lower crust. Short wavelength positive magnetic features that correlate with negative gravity anomalies are interpreted to represent shallower granitic intrusions. They appear to be focused along major fault zones that might have controlled the locus for magmatism. The eastern Thomson Orogen is characterized by a prominent NE structural grain and orthogonal faults and fold interference patterns resulting in a series of troughs and highs. The western Thomson Orogen consists of a series of NW-trending structures interpreted to reflect reverse faults. Sedimentation and basin development are interpreted to have initiated in the Neoproterozoic to Early Cambrian during E-W- to ENE-WSW extension, possibly related to the Rodinia break-up. This extensional event was followed by Late Cambrian shortening recorded in the Maneroo Platform and the Diamantina River Domain which possibly correlates with the Delamerian Orogeny. Renewed deposition and volcanism occurred during the Ordovician and may have continued until Late Silurian, resulting in thinned Proterozoic basement crust and extensive basin systems that formed in a distal continental back-arc environment. Our interpretation places the Thomson Orogen to the west of the Neoproterozoic passive margin preserved in the Anakie Inlier. The region is likely to represent the internal extensional architecture during the Rodinia break-up that has been subsequently extensively modified by multiple extensional basin forming events and transient episodes of crustal shortening and basin inversion.

The growth of a mountain belt forced by base-level fall: Tectonics and surface processes during the evolution of the Alborz Mountains, N Iran

NASA Astrophysics Data System (ADS)

Ballato, Paolo; Landgraf, Angela; Schildgen, Taylor F.; Stockli, Daniel F.; Fox, Matthew; Ghassemi, Mohammad R.; Kirby, Eric; Strecker, Manfred R.

2015-09-01

The idea that climatically modulated erosion may impact orogenic processes has challenged geoscientists for decades. Although modeling studies and physical calculations have provided a solid theoretical basis supporting this interaction, to date, field-based work has produced inconclusive results. The central-western Alborz Mountains in the northern sectors of the Arabia-Eurasia collision zone constitute a promising area to explore these potential feedbacks. This region is characterized by asymmetric precipitation superimposed on an orogen with a history of spatiotemporal changes in exhumation rates, deformation patterns, and prolonged, km-scale base-level changes. Our analysis suggests that despite the existence of a strong climatic gradient at least since 17.5 Ma, the early orogenic evolution (from ∼36 to 9-6 Ma) was characterized by decoupled orographic precipitation and tectonics. In particular, faster exhumation and sedimentation along the more arid southern orogenic flank point to a north-directed accretionary flux and underthrusting of Central Iran. Conversely, from ∼6 to 3 Ma, erosion rates along the northern orogenic flank became higher than those in the south, where they dropped to minimum values. This change occurred during a ∼3-Myr-long, km-scale base-level lowering event in the Caspian Sea. We speculate that mass redistribution processes along the northern flank of the Alborz and presumably across all mountain belts adjacent to the South Caspian Basin and more stable areas of the Eurasian plate increased the sediment load in the basin and ultimately led to the underthrusting of the Caspian Basin beneath the Alborz Mountains. This underthrusting in turn triggered a new phase of northward orogenic expansion, transformed the wetter northern flank into a new pro-wedge, and led to the establishment of apparent steady-state conditions along the northern orogenic flank (i.e., rock uplift equal to erosion rates). Conversely, the southern mountain front became the retro-wedge and experienced limited tectonic activity. These observations overall raise the possibility that mass-distribution processes during a pronounced erosion phase driven by base-level changes may have contributed to the inferred regional plate-tectonic reorganization of the northern Arabia-Eurasia collision during the last ∼5 Ma.

Erosion and deposition mode in a developing foreland basin: Temporal and spatial distribution of provenance in southwestern Taiwan

NASA Astrophysics Data System (ADS)

Yang, K. M.; Kun-an, H.; Chien, C. W.; Leh-chyun, W.; Chi-Cheng, Y.

2017-12-01

The foreland basin in southwestern Taiwan offers an idealistic example for the study of tectonostratigraphy in basin development. The subsidence analysis indicates that the recent basin development went through at least two rapid subsidence events, along with back-and-forth migration of the forebulge. This study aims to explore the interaction between the uplifting forebulge and coevally subsiding foredeep primarily based on petrofacies analysis, the results of which were then interpreted with the well-established tectonostratigraphic and biostratigraphic frameworks to infer the erosion and deposition mode during the basin development. The craton had been the sediment source to the west of the study area in the pre-orogenic period. In the initial stage of foreland basin development, the forebulge slowly elevated and started to obstruct sediment supplies from the craton. Before the period of NN19, the forebulge not only became the barrier of the most cratonic sediment supplies but also shed a major amount of detritus into the adjacent area. In addition, regional topographic relief, which was formed by syn-orogenic normal faulting during the NN11-15, locally changed the composition and transportation modes of the sediments; the exposed basement of the footwall also became the source of the sediments shed into the adjacent depo-centers. After the NN19, whole area was influenced predominantly by the orogenic belt from the east. Large amounts of slate fragments began to appear in the middle NN19 and relative percentage of the metamorphic lithics was increased upward and northward. As the orogen moved westward along with the foreland basin development, the studied area changed from the distal to proximal parts of the foredeep and sediment sources were controlled mainly by river systems derived from the orogen. The metamorphic lithics decreased southward and concentrated in the central part of the study area, suggesting that the slate fragments which were transported parallel with the orientation of submarine canyons since NN13 to the south of the study area. We propose that 1) from NN13 to NN18, the episodic subsidence in the foreland basin implies episodic movement of the orogenic belt, and 2) since the period of NN19, the orogenic belt and foreland basin has been developing in a continuous and steady state.

Paleozoic Orogens of Mexico and the Laurentia-Gondwana Connections: an Update

NASA Astrophysics Data System (ADS)

Ortega-Gutierrez, F.

2009-05-01

The present position of Mexico in North America and the fixist tectonic models that prevailed prior to the seventies of the past century, have considered the main Paleozoic tectonic systems of Mexico as natural extensions of the orogens that fringed the eastern and southern sides of the Laurentian craton. Well known examples of pre-Mesozoic orogens in Mexico are the Oaxacan, Acatlan, and Chiapas polymetamorphic terranes, which have been correlated respectively with the Grenville and Appalachian-Ouachitan orogens of eastern North America. Nonetheless, several studies conducted during the last decade in these Mexican orogenic belts, have questioned their Laurentian connections, regarding northwestern Gondwana instead as the most plausible place for their birth and further tectonic evolution. This work pretends to approach the problem by briefly integrating the massive amount of new geological information, commonly generated through powerful dating methods such as LA-ICPM-MS on detrital zircon of sedimentary and metasedimentary units in the Paleozoic crustal blocks, which are widely exposed in southern and southeastern Mexico. The Acatlan Complex bears the closest relationships to the Appalachian orogenic system because it shows thermotectonic evidence for opening and closure of the two main oceans involved in building the Appalachian mountains in eastern Laurentia, whereas two other Paleozoic terranes in NW and SE Mexico, until recently rather geologically unknown, may constitute fundamental links between the Americas for the last-stage suturing and consolidation of western Pangea. The buried basement of the Yucatan platform (400,000 squared km) on the other hand, remains as one of the most relevant problems of tectonostratigraphic correlations across the Americas, because basement clasts from the Chicxulub impact ejecta reveal absolute and Nd-model ages that suggest close Gondwanan affinities. Major changes in the comprehension of the Paleozoic orogens in Mexico include the swift of the Acatlan Complex from Iapetus to Rheic scenarios, and the apparent continuation of the Ouachita belt across northern Mexico into south central Sonora, rather than displaced eastwards along the legendary Mojave-Sonora megashear. And yet, poorly known suture-related lithotectonic associations of Paleozoic metamorphic rocks and arc granitoids that underlie the eastern margin of Mexico, have not been explained by existing models dealing with the Appalachian-Mexico-Gondwanan connections.

Improving our understanding of the evolution of mountain belts via the Collisional Orogeny in the Scandinavian Caledonides (COSC) project: Results from seismic investigations and plans for the 2.5 km deep COSC-2 borehole

NASA Astrophysics Data System (ADS)

Juhlin, C.; Almqvist, B. S. G.; Buske, S.; Giese, R.; Hedin, P.; Lorenz, H.

2017-12-01

Mountain belts (orogens) have influenced, and do influence, geological processes and climatic conditions considerably, perhaps more than any other natural phenomenon. The Alpine-Himalayan mountain belt is the prime example of a collisional orogen today. However, research in an active orogen is mostly constrained to observe and interpret the expression of processes at the surface, while the driving processes act at depth, often at mid-crustal levels (20 km) and deeper. About 440 million years ago, an orogen comparable in dimension and tectonic setting to today's Alpine-Himalayan orogen was developing in what is western Scandinavia today. Since then, erosion has removed much of the overburden and exposed the deep interior of the orogen, facilitating direct observation of rocks that are deep in the crust in modern orogens. In the COSC project we study how large rock volumes (allochthons) were transported during the collision of two continents and the associated deformation. The emplacement of high-grade metamorphic allochthons during orogeny has been the focus of COSC-1 research, centered on a 2.5 km deep fully cored borehole drilled in the summer of 2014 through the lower part of the high-grade Seve Nappe Complex near the town of Åre in western Sweden. The planned COSC-2 borehole (also fully cored to 2.5 km) will complement the COSC-1 borehole and allow a 5 km deep tectonostratigraphic column of the Caledonides to be constructed. The rock volume in the proximity of the COSC-2 borehole will be imaged with a combination of very-high and high-resolution geophysical experiments, such as a combination of high frequency seismics; zero offset and walk-away vertical seismic profiling (VSP); and a sparse 3D coverage around the drill site combined with 2D seismic profiles of several kilometers length in different directions. Downhole geophysical logging will provide additional information on the in-situ rock physical properties. Data from surface surveys will be calibrated against and integrated with the borehole data and the geological interpretation of the drill core. The COSC-1 and COSC-2 boreholes will provide a field laboratory for investigating mountain building processes, how plates and rock units deform, what structures and units are formed and their physical properties.

Detrital zircon fission track analysis reveals the thermotectonic history of ice-covered rocks of the Chugach-St. Elias orogen, SE-Alaska

NASA Astrophysics Data System (ADS)

Enkelmann, E.; Garver, J. I.; Pavlis, T. L.; Bruhn, R. L.; Chapman, J. B.

2007-12-01

Investigating the exhumation history of the Chugach-St. Elias orogen (SE Alaska) using low-temperature thermochronometers is challenged by significant ice cover. Assuming exhumation drove cooling, cooling ages increase with elevation in an orogenic belt, and as such the youngest ages occur in valley bottoms. Cooling and exhumation rates are expected to be very high in the Chugach-St. Elias orogen due to efficient glacial erosion and the most intense erosion occurs under the major ice fields. To study the cooling history of rapidly exhuming rocks underneath this ice cover, we analyzed detrital zircon fission track (DZFT) ages of Recent sand samples from modern rivers that drain the central Bagley Ice field and smaller glaciers draining north (Chitina valley) and south (Pacific) of the mountain range. A distinct advantage of DZFT is that it allows one to sample a landscape regardless of accessibility. The youngest ZFT component populations of samples north and south of the Bagley Ice field record a Late Miocene (5-13 Ma) cooling of the orogen. The pattern of cooling ages shows symmetry across the orogen predates the earliest record of the collision of the Yakutat terrane with Alaska. This result contrasts with the asymmetric cooling pattern displayed by low- temperature thermochronological ages (AFT and AHe) of the exposed bedrock within the range. Apatite FT and U- Th/He ages of bedrock samples south of the Bagley Ice field record the syn-collisional (<5 Ma) fast exhumation whereas apatite ages to the north reveal more heterogeneous exhumation and vary widely from Miocene to Eocene. The bedrock samples from throughout the orogenic belt thus display predominantly the effects of the recent climatic situation of the mountain range with very high precipitation on the south, seaward side versus a more arid north side. Our ZFT results from the northern drainages highlight the relative sense and timing of two important fault zones, both accommodate south-side-up exhumation. The Steward Creek fault zone, located north of the Bagley Ice field, limits the Late Miocene exhumation, whereby samples north of it yielded age populations that are Late Eocene to Cretaceous (30-120 Ma) or older. The Border Ranges fault zone, located farther north, limits the Late Eocene cooling and exhumation of the low-P and high-T Chugach Metamorphic Complex that is inferred to have formed during Eocene ridge subduction. This study provides the first insights on the exhumation history of the Chugach- St. Elias orogen between the time of Eocene ridge subduction and full collision of the Yakutat terrane with North America in the latest Miocene.

A Paleozoic Japan-type subduction-accretion system in the Beishan orogenic collage, southern Central Asian Orogenic Belt

NASA Astrophysics Data System (ADS)

Song, Dongfang; Xiao, Wenjiao; Windley, Brian F.; Han, Chunming; Tian, Zhonghua

2015-05-01

Magmatic arcs ascribed to oceanic lithosphere subduction played a dominant role in the construction of the accretionary Central Asian Orogenic Belt (CAOB). The Beishan orogenic collage, situated between the Tianshan Orogen to the west and the Inner Mongolia Orogen to the east, is a key area to understanding the subduction and accretionary processes of the southern CAOB. However, the nature of magmatic arcs in the Beishan and the correlation among different tectonic units along the southern CAOB are highly ambiguous. In order to investigate the subduction-accretion history of the Beishan and put a better spatial and temporal relationship among the tectonic belts along the southern CAOB, we carried out detailed field-based structural geology and LA-ICP-MS zircon U-Pb geochronological as well as geochemical studies along four cross-sections across crucial litho-tectonic units in the central segment of the Beishan, mainly focusing on the metamorphic assemblages and associated plutons and volcanic rocks. The results show that both the plutonic and volcanic rocks have geochemical characteristics similar to those of subduction-related rocks, which favors a volcanic arc setting. Zircons from all the plutonic rocks yield Phanerozoic ages and the plutons have crystallization ages ranging from 464 ± 2 Ma to 398 ± 3 Ma. Two volcanic-sedimentary rocks yield zircons with a wide age range from Phanerozoic to Precambrian with the youngest age peaks at 441 Ma and 446 Ma, estimated to be the time of formation of the volcanic rocks. These new results, combined with published data on ophiolitic mélanges from the central segment of the Beishan, favor a Japan-type subduction-accretion system in the Cambrian to Carboniferous in this part of the Paleo-Asian Ocean. The Xichangjing-Niujuanzi ophiolite probably represents a major suture zone separating different tectonic units across the Beishan orogenic collage, while the Xiaohuangshan-Jijitaizi ophiolitic mélange may represent a Carboniferous back-arc basin formed as a result of slab rollback ascribed to northward subduction of the Niujuanzi oceanic lithosphere. Subduction of this back-arc basin probably took place in the early Carboniferous, generating the widespread arc-related granitoids including adakitic plutons, and overlapping earlier arc assemblages. The Beishan orogenic collage is not the eastern extension of the Chinese Central Tianshan, but it was generated by the same north-dipping subduction system separated by the Xingxingxia transform fault, as revealed by available regional data. This contribution implies that in addition to fore-arc accretion, back-arc accretion ascribed to opening and closure of a back-arc basin may also have been a common process in the construction of the CAOB, resembling that of the Mesozoic-Cenozoic subduction-accretion system in the SW pacific.

Evidences of Silurian dextral transpression in the Scandinavian Caledonides

NASA Astrophysics Data System (ADS)

Torgersen, Espen; Viola, Giulio

2017-04-01

The Scandinavian Caledonides are classically interpreted as a fold and thrust belt resulting from the collision between Laurentia and Baltica during the Silurian, which involved the up-to-400 km ESE-wards translation of nappes onto the Baltoscandian platform. It has been suggested that the Caledonian fold and thrust belt formed through several distinct orogenic episodes, from early shortening in the Late Ordovician to orogenic collapse in the Devonian. The classic Caledonian, orogen-perpendicular ESE-ward nappe transport is constrained by abundant and consistently oriented stretching lineations across the entire orogen and unambiguous kinematic indicators. However, there is also a large number of NW-SE-trending and roughly orogen-parallel lineations, particularly in the upper ophiolite- and eclogite-bearing nappes, which are more challenging to interpret with the traditional orogeny evolution model. The analysis of the areal extent, spatial distribution and geometrical relationships of the Caledonian nappes in southern and central Norway, however, offers new insights and allows for new constraints on the bulk kinematic framework of the shortening history of the belt. Here we present new, first-order geological observations that demonstrate a two-fold compressional history and associated strain partitioning during Caledonian convergence. More specifically, we propose that Late Ordovician NNW-SSE shortening caused early compression, followed by WNW-ESE Early Silurian shortening, which resulted in strain partitioning along the planar fabrics and discontinuities from the earlier event. In detail, orogen-parallel dextral wrench tectonics caused significant lateral displacement along at least three, orogen-scale NE-SW striking corridors, wherein the nappes appear to be consistently displaced in a dextral fashion. We propose that the Møre-Trøndelag Fault Complex, which accommodated significant sinistral displacements during the later Devonian orogenic collapse, localized on one of these early dextral shear corridor. This is expressed by the asymptotic dragging of the nappes along it and also the significant morphological asymmetry of the central Norwegian coast line, which is not compatible with sinistral shearing. Along a southern corridor, which extends from the Hardangerfjord to the east of Folldal, the Caledonian foliation is asymptotically bent into the ENE-WSW orientation of the shear corridor, also consistent with an overall dextral kinematics. This is also confirmed by the gradual reorientation and increased strain toward these shear corridors of Ordovician to Silurian intrusive bodies, indicating that the dextral displacement is of Silurian age. Similar dextral displacements along NE-SW faults have previously been interpreted from potential field data offshore southern Norway. Large-scale dextral transpression in the Scandinavian Caledonides readily accounts for numerous geological features that are not as easily reconciled with the more classical model of only ESE-ward translation and/or sinistral transpression.

Axial Belt Provenance: modern river sands from the core of collision orogens

NASA Astrophysics Data System (ADS)

Resentini, A.; Vezzoli, G.; Paparella, P.; Padoan, M.; Andò, S.; Malusà, M.; Garzanti, E.

2009-04-01

Collision orogens have a complex structure, including diverse rock units assembled in various ways by geodynamic processes. Consequently, orogenic detritus embraces a varied range of signatures, and unravelling provenance of clastic wedges accumulated in adjacent foreland basins, foredeeps, or remnant-ocean basins is an arduous task. Dickinson and Suczek (1979) and Dickinson (1985) recognized the intrinsically composite nature of orogenic detritus, but did not attempt to establish clear conceptual and operational distinctions within their broad "Recycled Orogenic Provenance". In the Alpine and Himalayan belts, the bulk of the detritus is produced by focused erosion of the central backbone of the orogen, characterized by high topography and exhumation rates (Garzanti et al., 2004; Najman, 2006). Detritus derived from such axial nappe pile, including slivers of thinned continental-margin lithosphere metamorphosed at depth during early collisional stages, has diagnostic general features, which allows us to define an "Axial Belt Provenance" (Garzanti et al., 2007). In detail, "Axial Belt" detrital signatures are influenced by metamorphic grade of source rocks and relative abundance of continental versus oceanic protoliths, typifying distinct subprovenances. Metasedimentary cover nappes shed lithic to quartzolithic detritus, including metapelite, metapsammite, and metacarbonate grains of various ranks; only amphibolite-facies metasediments supply abundant heavy minerals (e.g., almandine garnet, staurolite, kyanite, sillimanite, diopsidic clinopyroxene). Continental-basement nappes shed hornblende-rich quartzofeldspathic detritus. Largely retrogressed blueschist to eclogite-facies metaophiolites supply albite, metabasite and foliated antigorite-serpentinite grains, along with abundant heavy minerals (epidote, zoisite, clinozoisite, lawsonite, actinolitic to barroisitic amphiboles, glaucophane, omphacitic clinopyroxene). Increasing metamorphic grade and deeper tectonostratigraphic level of source rocks are reflected by: a) increasing rank of metamorphic rock fragments (as indicated by progressive development of schistosity and growth of micas and other index minerals; MI index of Garzanti and Vezzoli, 2003); b) increasing feldspars; c) increasing heavy-mineral concentration (HMC index); d) increasing hornblende, changing progressively in color from blue/green to green/brown (HCI index); e) successive appearance of chloritoid, staurolite, kyanite, fibrolitic and prismatic sillimanite (MMI index; Garzanti and Andò, 2007). Dickinson W.R. 1985. Interpreting provenance relations from detrital modes of sandstones. In: Zuffa G.G. (ed.), Reidel, NATO ASI Series 148: 333-361. Dickinson W.R. and C.A. Suczek. 1979. Plate tectonics and sandstone composition. Am. Assoc. Pet. Geol. Bull. 63: 2164-2172. Garzanti E. and S. Andò. 2007, Plate tectonics and heavy-mineral suites of modern sands. In: Mange M. and D. Wright (eds.), Elsevier, Developments in Sedimentology Series 58: 741-763. Garzanti E. and G. Vezzoli. 2003. A classification of metamorphic grains in sands based on their composition and grade. J. Sedimentary Res. 73: 830-837. Garzanti E., C. Doglioni, G. Vezzoli and S. Andò. 2007. Orogenic Belts and Orogenic Sediment Provenances. J. Geology 115: 315-334. Garzanti E., G. Vezzoli, S. Andó, C. France-Lanord, S.K. Singh and G. Foster. 2004. Sediment composition and focused erosion in collision orogens: the Brahmaputra case. Earth Planet. Sci. Lett. 220: 157-174. Najman Y. 2006. The detrital record of orogenesis: a review of approaches and techniques used in the Himalayan sedimentary basins. Earth Sci. Rev. 74: 1-72.

An isotopic perspective on growth and differentiation of Proterozoic orogenic crust: From subduction magmatism to cratonization

NASA Astrophysics Data System (ADS)

Johnson, Simon P.; Korhonen, Fawna J.; Kirkland, Christopher L.; Cliff, John B.; Belousova, Elena A.; Sheppard, Stephen

2017-01-01

The in situ chemical differentiation of continental crust ultimately leads to the long-term stability of the continents. This process, more commonly known as 'cratonization', is driven by deep crustal melting with the transfer of those melts to shallower regions resulting in a strongly chemically stratified crust, with a refractory, dehydrated lower portion overlain by a complementary enriched upper portion. Since the lower to mid portions of continental crust are rarely exposed, investigation of the cratonization process must be through indirect methods. In this study we use in situ Hf and O isotope compositions of both magmatic and inherited zircons from several felsic magmatic suites in the Capricorn Orogen of Western Australia to highlight the differentiation history (i.e. cratonization) of this portion of late Archean to Proterozoic orogenic crust. The Capricorn Orogen shows a distinct tectonomagmatic history that evolves from an active continental margin through to intracratonic reworking, ultimately leading to thermally stable crust that responds similarly to the bounding Archean Pilbara and Yilgarn Cratons. The majority of magmatic zircons from the main magmatic cycles have Hf isotopic compositions that are generally more evolved than CHUR, forming vertical arrays that extend to moderately radiogenic compositions. Complimentary O isotope data, also show a significant variation in composition. However, combined, these data define not only the source components from which the magmas were derived, but also a range of physio-chemical processes that operated during magma transport and emplacement. These data also identify a previously unknown crustal reservoir in the Capricorn Orogen.

The eastern Central Asian Orogenic Belt: formation and evolution

NASA Astrophysics Data System (ADS)

Xu, Bei; Xu, Wenliang

2017-08-01

The Central Asian Orogenic Belt (CAOB) extends from the northern Eurasian continent in the west via Mongolia, Inner Mongolia and northeast part of China to the Russia Far East in the east. It is characterized by complex trench-arc-basin subduction system, exotic terrane (microcontinents) accretion, massive generation of juvenile crust during the Neoproterozoic-Phanerozoic (e.g., Jahn et al., 2000, 2004; Sengör et al., 1993). A lot of papers about formation and evolution of the CAOB have been published and new field observations and geochemical data for key areas of the CAOB challenge to previous assessments. Several areas previously defined as juvenile are now shown to have mixed crustal compositions. For example, Kröner et al. (2014, in press) estimated that the distribution of various crustal provinces is truly juvenile crustal material ca. 20%, mixed crust ca. 30%, old crust ca. 50%，respectively, in the CAOB, similar to those in other accretionary orogens through Earth history. A two-stage model for the evolution of the CAOB has been suggested based on recent data from the Eastern Tianshan and Beishan (Gao et al., 2011; Su et al., 2011; Chen et al., 2016; Wang et al., 2017), which suggests the process of the formation and evolution of the CAOB includes closure of the Paleo Asian ocean (PAO), formation of orogenic belt before the late Paleozoic and crustal extension and magmatism resulted from plume upon the young orogenic belt after the late Paleozoic. This new model changes previous concept that the CAOB developed through the Paleozoic and is supported by recent researches on the eastern CAOB.

Detrital zircon provenance of the Late Triassic Songpan-Ganzi complex: Sedimentary record of collision of the North and South China blocks

USGS Publications Warehouse

Weislogel, A.L.; Graham, S.A.; Chang, E.Z.; Wooden, J.L.; Gehrels, G.E.; Yang, H.

2006-01-01

Using detrital zircon geochronology, turbidite deposystems fed from distinct sediment sources can be distinguished within the Songpan-Ganzi complex, a collapsed Middle to Late Triassic turbidite basin of central China. A southern Songpan-Ganzi deposystem initially was sourced solely by erosion of the Qinling-Dabie orogen during early Late Triassic time, then by Qinling-Dabie orogen, North China block, and South China block sources during middle to late Late Triassic time. A northern Songpan-Ganzi system was sourced by erosion of the Qinling-Dabie orogen and the North China block throughout its deposition. These separate deposystems were later tectonically amalgamated to form one complex and then uplifted as the eastern Tibet Plateau. ?? 2006 Geological Society of America.

Association of orogenic activity with the Ordovician radiation of marine life

NASA Technical Reports Server (NTRS)

Miller, A. I.; Mao, S.

1995-01-01

The Ordovician radiation of marine life was among the most substantial pulses of diversification in Earth history and coincided in time with a major increase in the global level of orogenic activity. To investigate a possible causal link between these two patterns, the geographic distributions of 6576 individual appearances of Ordovician vician genera around the world were evaluated with respect to their proximity to probable centers of orogeny (foreland basins). Results indicate that these genera, which belonged to an array of higher taxa that diversified in the Middle and Late Ordovician (trilobites, brachiopods, bivalves, gastropods, monoplacophorans), were far more diverse in, and adjacent to, foreland basins than they were in areas farther removed from orogenic activity (carbonate platforms). This suggests an association of orogeny with diversification at that time.

Reconciling late fracturing over the entire Alpine belt: from structural analysis to geochronological constrains

NASA Astrophysics Data System (ADS)

Audrey, Bertrand; Sue, Christian

2016-04-01

Brittle deformations allow assessing the late stage of deformation of an orogenic chain. We reappraised the meaning of the late fracturing over the entire Alps in a global geodynamic context. The closure temperature of ZFT corresponds to the brittle-ductile transition in quartz. Therefore, ZFT ages are a proxy for the maximal age of brittle deformation. Combined analyses of ZFT ages with paleostresses data allow the comparison of the brittle deformations over the belt. In the Western Alps, paleostress indicate a major occurrence of orogen-paralell extension and associated strike-slip regimes (Champagnac et al. 2006; Sue et al. 2007 ; Sue and Tricart, 2003). Indeed, paleostress data show a rotation of the main σ3 stress axes along the arc. Those structures are of Miocene age and are related to the propagation of the Alpine front toward the external zone. In the Central Alps, Paleostress fields are dominated by orogen-parrallel extensional regimes both in the Bergell area (Ciancaleoni and Marquer 2008) and the Lepontie dome (Allanic, 2012). In the Eastern Alps, the only area where ZFT ages are of Tertiary ages is the Tauern Window. The brittle deformation is here dominated by orogen-parallel extension at the eastern and western borders of the dome and by strike-slip faulting in the central parts (Bertrand et al., 2015), and inferred to be driven by the combined collapse and lateral escape of the orogenic wedge, due to indentation on the Adriatic indenter (Ratschbacher et al., 1991). Major orogen-parallel extensional signal is closely linked with transcurrent deformation's component. It appears extremely stable all over the Alps and coeval with the propagation of the alpine front top the W-NW. Looking deeper, SKS splitting over the Alps [Qorbani et al., 2015] roughly indicates an orogen-parallel anisotropy pattern in the upper mantle. Indeed, the scheme of the SKS is very comparable with faulting data along-strike of the Alps. In this frame, we can compare both kinds of data, a priori disconnected, but which exhibit similar patterns. How about connecting deep processes in the upper alpine mantel, and its ductile flow, and upper crustal Miocene dynamics, as seen by brittle deformation? There is a very good correlation between the two pattern of deformation, related to two structural levels, the upper crust and the upper mantle, suggesting that the orogen-parallel extension could be an answer to lithospheric-scale processes. In this geodynamic model we may propose that the overall orogen-parallel Miocene extension observed in the upper crust of the internal Alps may be driven by mantel flow and slab retreat processes implying the Panonian slab to the East and the Apennine slab to the SW. REF: Allanic, C., 2013. PhD, Orléans, 272p - Bertrand, A. et al., 2015. Tectonophysics, 649, 1-17 - Champagnac J-D. et al. Tectonics. doi: 10.1029/2004TC001779 - Ciancaleoni, L. and Marquer, D., 2008 Tectonics, 27, 1-22. Ratschbacher, L. et al. 1989 Geology 17:404-407 - Schmid, S.M. et al. 1996. Tectonics, 15, 1036-1064 - Sue, C. and Tricart, P., 2003 Tectonics 22:1-25 - Sue, C. et al. 2007, IJES, 96, 1101-1129.

Basin-mountain structures and hydrocarbon exploration potential of west Junggar orogen in China

NASA Astrophysics Data System (ADS)

Wu, Xiaozhi; He, Dengfa; Qi, Xuefeng

2016-04-01

Situated in northern Xinjiang, China, in NE-SW trend, West Junggar Orogen is adjacent to Altai fold belt on the north with the Ertix Fault as the boundary, North Tianshan fold belt on the south with the Ebinur Lake Strike-slip Fault as the boundary, and the Junggar Basin on the southeast with Zaire-Genghis Khan-Hala'alat fold belt as the boundary. Covering an area of about 10×104 km2 in China, there are medium and small intermontane basins, Burqin-Fuhai, Tacheng, Hefeng and Hoxtolgay, distributing inside the orogen. Tectonically West Junggar Orogen lies in the middle section of the Palaeo-Asian tectonic domain where the Siberia, Kazakhstan and Tarim Plates converge, and is the only orogen trending NE-SW in the Palaeo-Asian tectonic domain. Since the Paleozoic, the orogen experienced pre-Permian plate tectonic evolution and post-Permian intra-plate basin evolution. Complex tectonic evolution and multi-stage structural superimposition not only give rise to long term controversial over the basin basement property but also complex basin-mountain coupling relations, structures and basin superimposition modes. According to analysis of several kinds of geological and geophysical data, the orogen was dominated by compressive folding and thrust napping from the Siberia plate in the north since the Late Paleozoic. Compressive stress weakened from north to south, corresponding to subdued vertical movement and enhanced horizontal movement of crustal surface from north to south, and finally faded in the overthrust-nappe belt at the northwest margin of the Junggar Basin. The variation in compressive stress is consistent with the surface relief of the orogen, which is high in the north and low in the south. There are two kinds of basin-mountain coupling relationships, i.e. high angle thrusting and overthrusting and napping, and two kinds of basin superimposition modes, i.e. inherited and progressive, and migrating and convulsionary modes. West Junggar orogen has rich oil and gas shows, and oil and gas fields have also been discovered in the Zaysan Basin in adjacent Kazakhstan and in adjacent Junggar, Tuha and Santanghu Basins. Drilling data, geochemical analysis of outcrop data, and the disection of ancient Bulongguoer oil reservoir at the south margin of the Hefeng Basin show there developed two sets of good transitional source rocks, the lower Hujierste Formation in the Middle Devonian (D2h1) and the Hebukehe Formation in the Upper Devonian and Lower Carboniferous (D3-C1h) in this area, which, 10 to 300 m thick, mainly distribute in the shoal water zone along Tacheng-Ertai Late Paleozoic island arc belt. Reservoirs were mainly formed in the Jurassic and then adjusted in two periods, one from the end of the Jurassic to middle Cretaceous and the other in early Paleogene. Those early oil reservoirs might be destroyed in areas such as Bulongguoer with poor preservation conditions, but in an area with good geologic and preserving conditions, oil and gas might accumulate again to form new reservoirs. Therefore, a potential Middle Devonian-Lower Carboniferous petroleum system may exist in Tacheng-Ertai island arc belt, which may become a new domain for exploration, north faulted fold belt in the Heshituoluogai basin, and Hongyan fault bench zone in north Ulungur Depression in the Junggar Basin are promising areas for hydrocarbon exploration.

A Geological Model for the Evolution of Early Continents (Invited)

NASA Astrophysics Data System (ADS)

Rey, P. F.; Coltice, N.; Flament, N. E.; Thébaud, N.

2013-12-01

Geochemical probing of ancient sediments (REE in black shales, strontium composition of carbonates, oxygen isotopes in zircons...) suggests that continents were a late Archean addition at Earth's surface. Yet, geochemical probing of ancient basalts reveals that they were extracted from a mantle depleted of its crustal elements early in the Archean. Considerations on surface geology, the early Earth hypsometry and the rheology and density structure of Archean continents can help solve this paradox. Surface geology: The surface geology of Archean cratons is characterized by thick continental flood basalts (CFBs, including greenstones) emplaced on felsic crusts dominated by Trondhjemite-Tonalite-Granodiorite (TTG) granitoids. This simple geology is peculiar because i/ most CFBs were emplaced below sea level, ii/ after their emplacement, CFBs were deformed into relatively narrow, curviplanar belts (greenstone basins) wrapping around migmatitic TTG domes, and iii/ Archean greenstone belts are richly endowed with gold and other metals deposits. Flat Earth hypothesis: From considerations on early Earth continental geotherm and density structure, Rey and Coltice (2008) propose that, because of the increased ability of the lithosphere to flow laterally, orogenic processes in the Archean produced only subdued topography (

Magnetic signatures of the orogenic crust of the Patagonian Andes with implication for planetary exploration

NASA Astrophysics Data System (ADS)

Díaz Michelena, Marina; Kilian, Rolf

2015-11-01

The Patagonian Andes represent a good scenario of study because they have outcrops of diverse plutonic rocks representative of an orogenic crust on Earth and other planets. Furthermore, metamorphic surface rocks provide a window into deeper crustal lithologies. In such remote areas, satellite and aerial magnetic surveys could provide important geological information concerning exposed and not exposed rocks, but they integrate the magnetic anomalies in areas of kilometres. For the southernmost Andes long wavelength satellite data show clear positive magnetic anomalies (>+100 nT) for the Patagonian Batholith (PB), similar as parts of the older martian crust. This integrated signal covers regions with different ages and cooling histories during magnetic reversals apart from the variability of the rocks. To investigate the complex interplay of distinct magnetic signatures at short scale, we have analysed local magnetic anomalies across this orogen at representative sites by decimeter-scale magnetic ground surveys. As expected, the investigated sites have positive and negative local anomalies. They are related to surface and subsurface rocks, and their different formation and alternation processes including geomagnetic inversions, distinct Curie depths of the magnetic carriers, intracrustal deformation among other factors. Whole rock chemistry (ranging from 45 to >80 wt.% SiO2 and from 1 to 18 wt.% FeOtot.), magnetic characteristics (susceptibilities, magnetic remanence and Königsberger ratios) as well as the composition and texture of the magnetic carriers have been investigated for representative rocks. Rocks of an ultramafic to granodioritic intrusive suite of the western and central PB contain titanomagnetite as major magnetic carrier. Individual magnetic signatures of these plutonic rocks reflect their single versus multidomain status, complex exolution processes with ilmenite lamella formations and the stoichiometric proportions of Cr, Fe and Ti in the oxides. At the eastern margin of the PB the investigated plutons and mafic dykes have been emplaced and equilibrated at 4-6 km depth. They do not contain magnetite but include variable amounts of ferrimagnetic monoclinic C4 pyrrhotite, which was formed along fractures zones by a hydrothermal gold-bearing mineralisation. The intensity of their positive magnetic anomalies (up to +220 nT) is well correlated with the amount of pyrrhotite (1-4 vol.%). In all cases, high resolution ground surveys variations of the magnetic signature down to 20 nT could be used to clearly distinguish different rock types on a decimeter scale. Vector magnetometer MOURA designed for martian exploration was successfully used for these surveys and provides results comparable to a commonly used caesium scalar magnetometer. This is important for near future ground surveys on Mars and the Moon.

The anatomy of the Cycladic Blueschist Unit on Sifnos Island (Cyclades, Greece): implications for exhumation model of high-pressure rocks

NASA Astrophysics Data System (ADS)

Roche, Vincent; Laurent, Valentin; Jolivet, Laurent; Cardello, Giovanni Luca; Scaillet, Stéphane

2015-04-01

Key words.- Aegean sea, Cyclades, Sifnos, high pressure and low temperature metamorphism, syn-orogenic exhumation, post-orogenic extension, strain localization. Since 35 Ma, the kinematics of the Aegean domain has been mainly controlled by the southward retreat of the African slab, inducing backarc extension. The main structures and associated kinematic are well constrained, but the kinematics of deformation before 35 Ma, coeval with the exhumation of blueschists and eclogites of the Cycladic Blueschist Unit, has been so far poorly studied. Hence, syn-orogenic deformation and exhumation mechanisms of the Cycladic Blueschists Unit remain disputed in part because the structure and kinematic history of High Pressure and Low Temperature (HP-LT) rocks are interpreted differently in the literature. In order to understand and constrain the exhumation history of HP-LT rocks, Sifnos Island is particularly relevant because HP-LT parageneses are exceptionally well preserved and different degree of retrogression are observed in two main units. The aims of this work attempts at firstly solving uncertainties on the position and geometry of major contacts between units and, secondly, to provide new structural constraints on the tectonic history of HP-LT units generated in the subduction zone during the Eocene. We show, through new geological and metamorphic maps, cross-sections and analyses of kinematic indicators and their relation to metamorphism, that Sifnos is characterized by shallow-dipping shear zones reactivating weak zones due to competence contrasts or earlier tectonic contacts (i.e., syn-orogenic). Structures and kinematics, associated with these shear zones, show a top-to-the-N to -NE ductile shearing deformation. A continuum of deformation can be observed from the Eocene syn-orogenic blueschist-facies to the Oligocene-Miocene post-orogenic greenschist-facies with the same top-to-the-NE sense of shear showing that the same shear zones, formed during syn-orogenic exhumation were reactivated during the formation of the Aegean Sea. A progressive localization of strain along discrete shear zones toward the base of the tectonic pile is also observed. The present-day shape of the island is largely controlled by late brittle fault reshaping the older domal structure. These late low-angle and steeper normal faults with kinematic indicators top-to-the-SW cross-cut the ductile structure and may represent the brittle expression of the West Cycladic Detachment System. Hence, we propose a model of progressive exhumation also based on available radiochronological constraints, first in the subduction channel of the Hellenic subduction, then in the backarc region with the same top-to-the-NE non-coaxial component of shearing. This reconstruction partly explains the different degrees of retrogression observed on the Cycladic Islands. The main discontinuities allowing this exhumation are the Vari Detachment (cropping out on Tinos and Syros islands) during the syn-orogenic period (Eocene) and then the NCDS and WCDS afterward.

2-D magnetotelluric experiment to investigate the Nassugtoqidian orogeny in South-East Greenland

NASA Astrophysics Data System (ADS)

Heincke, Björn; Chen, Jin; Riisager, Peter; Kolb, Jochen; Jørgensen, Asta F.

2015-04-01

The northwest-trending Palaeoproterozoic Nagssugtoqidian orogen extends over 250 km along the east coast of Greenland in the area around the village Tasiilaq. The geological evolution of this area closely compares with the ones of the Lewisian complex of Scotland and the Nagssugtoqidian orogen in western Greenland and, hence, leads to the suggestion that they belong to the same continental-scale orogenic belt. However, an accurate correlation across the inland ice is challenging and still ambiguous and therefore more detailed knowledge about the individual orogens might help to understand their relationship. Details about the large-scale tectonic evolution during the Nagssugtoqidian orogeny in this remote Arctic region are not known due to complex geology, relatively coarse geological mapping and the lack of extensive geophysical investigations. E.g. the vergence of the orogen, subduction-related magmatism and accretion history are matters of ongoing discussion (Kalsbeek et al., 1993; Nutman et al., 2008 and Kolb, 2013). We performed a 2-D magnetotelluric (MT) experiment across the southern part of the orogen along the Sermilik Fjord in order to improve our understanding of the orogenic process in general and to better constrain the location and vergence of the suture zone. However, because of the rough climate and the lack of infrastructure, this study is considered as a first test to investigate how MT surveys can be most efficiently performed in this remote part of the world. The NE-SW trending profile consists of eight MT stations and has a total length of ~70 km using long period LEMI-420 systems. The quality of the data is severely affected by polar electrojets that do not satisfy the plane wave assumptions, which is typical for regions close to the magnetic poles. In order to reduce the distortion from these signals onto the impedance estimates, we tested different advanced processing schemes. In addition to the more conventional robust response function estimator BIRRP from Chave and Thomson (2004), we applied a recent technique that is based on empirical mode decomposition EMD proposed by Chen et al. (2012). This method works rather in the time than in the frequency domain and appears promising to reduce the impact of such time limited noise signals typically associated with electrojets. As first results, we present obtained impedance estimates, induction vectors and dimensionality analysis. Experience from this first feasibility study will be to develop strategies for larger MT surveys for the challenging conditions in Greenland.

Exhumation at orogenic indentor corners under long-term glacial conditions: Example of the St. Elias orogen, Southern Alaska

NASA Astrophysics Data System (ADS)

Spotila, James A.; Berger, Aaron L.

2010-07-01

Syntaxial bends in convergent plate boundaries, or indentor corners, display some of the most intriguing deformation patterns on Earth and are type localities for "aneurysms" of coupled erosion, thermal weakening, and strain. The St. Elias orogen in Alaska is a small, young convergent system that has been dominated by a glacial climate for much of its history and exhibits two prominent indentor corners that are not well understood. We have added 40 new apatite (U-Th)/He ages to the already extensive dataset for the low-temperature cooling history of this orogen to constrain the pattern of exhumation in these indentor corners. Ages from the western syntaxis show minor variation across the structural hinge, suggesting that the bend has little effect on the pattern of exhumation and that structures, including the Bagley fault, connect smoothly from the orogen core to the subduction zone to the southwest. Rock uplift on the north flank of the range appears to increase steadily towards the eastern syntaxis, which represents the apex in the right-angle bend between a transform fault in the south and the collision zone in the west. Based on age-elevation relationships, zones of relative rock uplift can be defined in which the Mt. Logan massif, or the area just north of the eastern syntaxis, experienced ˜ 4.8 km greater rock uplift than background levels northwest of the western syntaxis. A bulge in relative rock uplift is symmetric about the hinge in the eastern indentor corner. However, rates of denudation in this bulge are not as rapid as the core of the fold and thrust belt and are lower than those implied by detrital cooling ages from beneath the Seward Glacier. This implies that a large bull's eye of ultra-rapid (˜ 5 mm/yr) exhumation does not occur and that the subpopulation of young detrital ages may be sourced from a narrow transpressional zone along the Fairweather fault. Unlike the Himalayan syntaxes, it thus appears that an aneurysm of coupled erosion-strain has not developed in either indentor corner of the St. Elias orogen. This may indicate a limit to the degree to which glacial erosion can partition strain in convergent orogens. Similarly, the likely existence of a through-going dextral fault, the Totschunda fault, through the eastern syntaxis implies that tectonics, rather than surface processes, exerts the main control on strain partitioning in these corners.

Seismic Refraction & Wide-angle Reflection Experiment on the Northern Margin of North China Craton -Data Acquisition and Preliminary Processing Result

NASA Astrophysics Data System (ADS)

Li, W.; Gao, R.; Keller, G. R.; Hou, H.; Li, Q.; Cox, C. M.; Chang, J. C.; Zhang, J.; Guan, Y.

2010-12-01

The evolution history of Central Asian Orogen Belt (CAOB) is still the main tectonic problems in northeastern Asia. The Siberia Craton (NC), North China Craton (NCC) and several blocks collided, and the resulting tectonic collage formed as the Paleo-Asian Ocean disappeared. Concerning the northern margin of North China Craton, many different geological questions remain unanswered, such as: the intracontinental orogenic process in the Yanshan orogen and the nature and location of the suture between the southern NC and the northern NCC. In Dec 2009, a 400 km long seismic refraction and wide-angle reflection profile was completed jointly by Institute of Geology, CAGS and University of Oklahoma. The survey line extended from the west end of the Yanshan orogen, across a granitoid belt to the Solonker suture zone. The recording of seismic waves from 8 explosions (500~1500 kg each) was conducted in four deployments of 300 Reftek125 (Texan) seismic recorders, with an average spacing of 1 km. For the calculations, we used the Rayinvr, Vmed and Zplot programs for ray tracing, model modification and phase picking. The initial result show that: 1)the depth of low velocity sediment cover ranges from 0.6 to 2.7 km (velocity: 2.8~5.6 km/s); 2)the depth of basement is 5.6~10 km (the depth of basement under the granitoid belt deepens to 10 km and velocity increases to 6.2 km/s); 3)the upper crust extends to a depth of 15.5~21 km and has the P-wave velocities between 5.6 and 6.4 km/s; 4)the thickness of the lower crust ranges from 22~28 km(velocity: 6.4~6.9 km/s); and 5)the depth of Moho varies from 39.5 km under the granitoid belt to 49 km under the Yanshan orogen. Based on these results, we can preliminarily deduce that: 1) the concave depression of the Moho observed represents the root of the Yanshan orogen, and it may prove that the orogen is dominated by thick-skinned tectonics; 2) the shape of velocity variations under the granitoid belt is suggestive of a magma conduit. It may be connected with subduction-collision magmatism between the southern NC and the northern NCC along the Solonker suture zone. Supported by Sinoprobe-02 and US NSF PIRE grant (0730154)

Petrological and zircon evidence for the Early Cretaceous granulite-facies metamorphism in the Dabie orogen, China

NASA Astrophysics Data System (ADS)

Gao, Xiao-Ying; Zhang, Qiang-Qiang; Zheng, Yong-Fei; Chen, Yi-Xiang

2017-07-01

An integrated study of petrology, mineralogy, geochemistry, and geochronology was carried out for contemporaneous mafic granulite and diorite from the Dabie orogen. The results provide evidence for granulite-facies reworking of the ultrahigh-pressure (UHP) metamorphic rock in the collisional orogen. Most zircons from the granulite are new growth, and their U-Pb ages are clearly categorized into two groups at 122-127 Ma and 188 ± 2 Ma. Although these two groups of zircons show similarly steep HREE patterns and variably negative Eu anomalies, the younger group has much higher U, Th and REE contents and Th/U ratios, much lower εHf(t) values than the older group. This suggests their growth is associated with different types of dehydration reactions. The older zircon domains contain mineral inclusions of garnet + clinopyroxene ± quartz, indicating their growth through metamorphic reactions at high pressures. In contrast, the young zircon domains only contain a few quartz inclusions and the garnet-clinopyroxene-plagioclase-quartz barometry yields pressures of 4.9 to 12.5 kb. In addition, the clinopyroxene-garnet Fe-Mg exchange thermometry gives temperatures of 738-951 °C. Therefore, the young zircon domains would have grown through peritectic reaction at low to medium pressures. The younger granulite-facies metamorphic age is in agreement not only with the adjacent diorite at 125 ± 1 Ma in this study but also the voluminous emplacement of coeval mafic and felsic magmas in the Dabie orogen. Mineral separates from both mafic granulite and its adjacent diorite show uniformly lower δ18O values than normal mantle, similar to those for UHP eclogite-facies metaigneous rocks in the Dabie orogen. In combination with major-trace elements and zircon Lu-Hf isotope compositions, it is inferred that the protolith of mafic granulites shares with the source rock of diorites, both being a kind of mafic metasomatites at the slab-mantle interface in the continental subduction channel. The spatial and temporal distribution of Early Cretaceous granulite-facies metamorphic rocks in this region is associated with the bimodal magmatism within a short period of 120-130 Ma in the postcollisional stage. This provides a direct link in petrogenesis between the granulitic, migmatic and magmatic rocks in the collisional orogen to active continental rifting, whereby high heat flow was transferred from the asthenospheric mantle into the thinned orogenic lithosphere for partial melting.

Reported industrial minerals occurrences and permissive areas for other occurrences in the Islamic Republic of Mauritania (phase V deliverable 88): Chapter R1 in Second projet de renforcement institutionnel du secteur minier de la République Islamique de Mauritanie (PRISM-II)

USGS Publications Warehouse

Langer, William H.; Anderson, Eric D.; Horton, John D.

2012-01-01

This report contains the USGS results of the PRISM-II Mauritania Minerals Project and is presented in cooperation with the Ministry of Petroleum, Energy, and Mines of the Islamic Republic of Mauritania. The Report is composed of separate chapters consisting of multidisciplinary interpretive reports with accompanying plates on the geology, structure, geochronology, geophysics, hydrogeology, geochemistry, remote sensing (Landsat TM and ASTER), and SRTM and ASTER digital elevation models of Mauritania. The syntheses of these multidisciplinary data formed the basis for additional chapters containing interpretive reports on 12 different commodities and deposit types known to occur in Mauritania, accompanied by countrywide mineral resource potential maps of each commodity/deposit type. The commodities and deposit types represented include: (1) Ni, Cu, PGE, and Cr deposits hosted in ultramafic rocks; (2) orogenic, Carlin-like, and epithermal gold deposits; (3) polymetallic Pb-Zn-Cu vein deposits; (4) sediment-hosted Pb-Zn-Ag deposits of the SEDEX and Mississippi Valley-type; (5) sediment-hosted copper deposits; ( 6) volcanogenic massive sulfide deposits; (7) iron oxide copper-gold deposits; (8) uranium deposits; (9) Algoma-, Superior-, and oolitic-type iron deposits; (10) shoreline Ti-Zr placer deposits; (11) incompatible element deposits hosted in pegmatites, alkaline rocks, and carbonatites, and; (12) industrial mineral deposits. Additional chapters include the Mauritanian National Mineral Deposits Database are accompanied by an explanatory text and the Mauritania Minerals Project GIS that contains all of the interpretive layers created by USGS scientists. Raw data not in the public domain may be obtained from the Ministry of Petroleum, Energy, and Mines in Nouakchott, Mauritania.

Geologic map of Mauritania (phase V, deliverables 51a, 51b, and 51c): Chapter A1 in Second projet de renforcement institutionnel du secteur minier de la République Islamique de Mauritanie (PRISM-II)

USGS Publications Warehouse

Bradley, Dwight C.; Motts, Holly; Horton, John D.; Giles, Stuart A.; Taylor, Cliff D.

2015-01-01

This report contains the USGS results of the PRISM-II Mauritania Minerals Project and is presented in cooperation with the Ministry of Petroleum, Energy, and Mines of the Islamic Republic of Mauritania. The Report is composed of separate chapters consisting of multidisciplinary interpretive reports with accompanying plates on the geology, structure, geochronology, geophysics, hydrogeology, geochemistry, remote sensing (Landsat TM and ASTER), and SRTM and ASTER digital elevation models of Mauritania. The syntheses of these multidisciplinary data formed the basis for additional chapters containing interpretive reports on 12 different commodities and deposit types known to occur in Mauritania, accompanied by countrywide mineral resource potential maps of each commodity/deposit type. The commodities and deposit types represented include: (1) Ni, Cu, PGE, and Cr deposits hosted in ultramafic rocks; (2) orogenic, Carlin-like, and epithermal gold deposits; (3) polymetallic Pb-Zn-Cu vein deposits; (4) sediment-hosted Pb-Zn-Ag deposits of the SEDEX and Mississippi Valley-type; (5) sediment-hosted copper deposits; ( 6) volcanogenic massive sulfide deposits; (7) iron oxide copper-gold deposits; (8) uranium deposits; (9) Algoma-, Superior-, and oolitic-type iron deposits; (10) shoreline Ti-Zr placer deposits; (11) incompatible element deposits hosted in pegmatites, alkaline rocks, and carbonatites, and; (12) industrial mineral deposits. Additional chapters include the Mauritanian National Mineral Deposits Database are accompanied by an explanatory text and the Mauritania Minerals Project GIS that contains all of the interpretive layers created by USGS scientists. Raw data not in the public domain may be obtained from the Ministry of Petroleum, Energy, and Mines in Nouakchott, Mauritania.

Permissive tracts for sediment-hosted lead-zinc-silver deposits in Mauritania (phase V, deliverable 72): Chapter J1 in Second projet de renforcement institutionnel du secteur minier de la République Islamique de Mauritanie (PRISM-II)

USGS Publications Warehouse

Mauk, Jeffrey L.; Horton, John D.

2012-01-01

This report contains the USGS results of the PRISM-II Mauritania Minerals Project and is presented in cooperation with the Ministry of Petroleum, Energy, and Mines of the Islamic Republic of Mauritania. The Report is composed of separate chapters consisting of multidisciplinary interpretive reports with accompanying plates on the geology, structure, geochronology, geophysics, hydrogeology, geochemistry, remote sensing (Landsat TM and ASTER), and SRTM and ASTER digital elevation models of Mauritania. The syntheses of these multidisciplinary data formed the basis for additional chapters containing interpretive reports on 12 different commodities and deposit types known to occur in Mauritania, accompanied by countrywide mineral resource potential maps of each commodity/deposit type. The commodities and deposit types represented include: (1) Ni, Cu, PGE, and Cr deposits hosted in ultramafic rocks; (2) orogenic, Carlin-like, and epithermal gold deposits; (3) polymetallic Pb-Zn-Cu vein deposits; (4) sediment-hosted Pb-Zn-Ag deposits of the SEDEX and Mississippi Valley-type; (5) sediment-hosted copper deposits; ( 6) volcanogenic massive sulfide deposits; (7) iron oxide copper-gold deposits; (8) uranium deposits; (9) Algoma-, Superior-, and oolitic-type iron deposits; (10) shoreline Ti-Zr placer deposits; (11) incompatible element deposits hosted in pegmatites, alkaline rocks, and carbonatites, and; (12) industrial mineral deposits. Additional chapters include the Mauritanian National Mineral Deposits Database are accompanied by an explanatory text and the Mauritania Minerals Project GIS that contains all of the interpretive layers created by USGS scientists. Raw data not in the public domain may be obtained from the Ministry of Petroleum, Energy, and Mines in Nouakchott, Mauritania.

Permissive tracts for algoma-, superior-, and oolitic-type iron deposits in Mauritania (phase V, deliverable 82): Chapter O1 in Second projet de renforcement institutionnel du secteur minier de la République Islamique de Mauritanie (PRISM-II)

USGS Publications Warehouse

Taylor, Cliff D.; Horton, John D.

2012-01-01

This report contains the USGS results of the PRISM-II Mauritania Minerals Project and is presented in cooperation with the Ministry of Petroleum, Energy, and Mines of the Islamic Republic of Mauritania. The Report is composed of separate chapters consisting of multidisciplinary interpretive reports with accompanying plates on the geology, structure, geochronology, geophysics, hydrogeology, geochemistry, remote sensing (Landsat TM and ASTER), and SRTM and ASTER digital elevation models of Mauritania. The syntheses of these multidisciplinary data formed the basis for additional chapters containing interpretive reports on 12 different commodities and deposit types known to occur in Mauritania, accompanied by countrywide mineral resource potential maps of each commodity/deposit type. The commodities and deposit types represented include: (1) Ni, Cu, PGE, and Cr deposits hosted in ultramafic rocks; (2) orogenic, Carlin-like, and epithermal gold deposits; (3) polymetallic Pb-Zn-Cu vein deposits; (4) sediment-hosted Pb-Zn-Ag deposits of the SEDEX and Mississippi Valley-type; (5) sediment-hosted copper deposits; ( 6) volcanogenic massive sulfide deposits; (7) iron oxide copper-gold deposits; (8) uranium deposits; (9) Algoma-, Superior-, and oolitic-type iron deposits; (10) shoreline Ti-Zr placer deposits; (11) incompatible element deposits hosted in pegmatites, alkaline rocks, and carbonatites, and; (12) industrial mineral deposits. Additional chapters include the Mauritanian National Mineral Deposits Database are accompanied by an explanatory text and the Mauritania Minerals Project GIS that contains all of the interpretive layers created by USGS scientists. Raw data not in the public domain may be obtained from the Ministry of Petroleum, Energy, and Mines in Nouakchott, Mauritania.

Permissive tracts for volcanogenic massive sulfide deposits in Mauritania (phase V, deliverable 76): Chapter L1 in Second projet de renforcement institutionnel du secteur minier de la République Islamique de Mauritanie (PRISM-II)

USGS Publications Warehouse

Taylor, Cliff D.; Horton, John D.

2012-01-01

This report contains the USGS results of the PRISM-II Mauritania Minerals Project and is presented in cooperation with the Ministry of Petroleum, Energy, and Mines of the Islamic Republic of Mauritania. The Report is composed of separate chapters consisting of multidisciplinary interpretive reports with accompanying plates on the geology, structure, geochronology, geophysics, hydrogeology, geochemistry, remote sensing (Landsat TM and ASTER), and SRTM and ASTER digital elevation models of Mauritania. The syntheses of these multidisciplinary data formed the basis for additional chapters containing interpretive reports on 12 different commodities and deposit types known to occur in Mauritania, accompanied by countrywide mineral resource potential maps of each commodity/deposit type. The commodities and deposit types represented include: (1) Ni, Cu, PGE, and Cr deposits hosted in ultramafic rocks; (2) orogenic, Carlin-like, and epithermal gold deposits; (3) polymetallic Pb-Zn-Cu vein deposits; (4) sediment-hosted Pb-Zn-Ag deposits of the SEDEX and Mississippi Valley-type; (5) sediment-hosted copper deposits; ( 6) volcanogenic massive sulfide deposits; (7) iron oxide copper-gold deposits; (8) uranium deposits; (9) Algoma-, Superior-, and oolitic-type iron deposits; (10) shoreline Ti-Zr placer deposits; (11) incompatible element deposits hosted in pegmatites, alkaline rocks, and carbonatites, and; (12) industrial mineral deposits. Additional chapters include the Mauritanian National Mineral Deposits Database are accompanied by an explanatory text and the Mauritania Minerals Project GIS that contains all of the interpretive layers created by USGS scientists. Raw data not in the public domain may be obtained from the Ministry of Petroleum, Energy, and Mines in Nouakchott, Mauritania.

Structure map of Mauritania (phase V, deliverables 52a and 52b): Chapter A2 in Second projet de renforcement institutionnel du secteur minier de la République Islamique de Mauritanie (PRISM-II)

USGS Publications Warehouse

Bradley, Dwight C.; Horton, John D.; Motts, Holly A.; Taylor, Cliff D.

2015-01-01

This report contains the USGS results of the PRISM-II Mauritania Minerals Project and is presented in cooperation with the Ministry of Petroleum, Energy, and Mines of the Islamic Republic of Mauritania. The Report is composed of separate chapters consisting of multidisciplinary interpretive reports with accompanying plates on the geology, structure, geochronology, geophysics, hydrogeology, geochemistry, remote sensing (Landsat TM and ASTER), and SRTM and ASTER digital elevation models of Mauritania. The syntheses of these multidisciplinary data formed the basis for additional chapters containing interpretive reports on 12 different commodities and deposit types known to occur in Mauritania, accompanied by countrywide mineral resource potential maps of each commodity/deposit type. The commodities and deposit types represented include: (1) Ni, Cu, PGE, and Cr deposits hosted in ultramafic rocks; (2) orogenic, Carlin-like, and epithermal gold deposits; (3) polymetallic Pb-Zn-Cu vein deposits; (4) sediment-hosted Pb-Zn-Ag deposits of the SEDEX and Mississippi Valley-type; (5) sediment-hosted copper deposits; ( 6) volcanogenic massive sulfide deposits; (7) iron oxide copper-gold deposits; (8) uranium deposits; (9) Algoma-, Superior-, and oolitic-type iron deposits; (10) shoreline Ti-Zr placer deposits; (11) incompatible element deposits hosted in pegmatites, alkaline rocks, and carbonatites, and; (12) industrial mineral deposits. Additional chapters include the Mauritanian National Mineral Deposits Database are accompanied by an explanatory text and the Mauritania Minerals Project GIS that contains all of the interpretive layers created by USGS scientists. Raw data not in the public domain may be obtained from the Ministry of Petroleum, Energy, and Mines in Nouakchott, Mauritania.

Geographic Information Systems (GIS) for la République Islamique de Mauritanie (PRISM-II) phase V (phase V, deliverable 92): Chapter T in Second projet de renforcement institutionnel du secteur minier de la République Islamique de Mauritanie (PRISM-II)

USGS Publications Warehouse

Horton, John D.; Taylor, Cliff D.

2015-01-01

This report contains the USGS results of the PRISM-II Mauritania Minerals Project and is presented in cooperation with the Ministry of Petroleum, Energy, and Mines of the Islamic Republic of Mauritania. The Report is composed of separate chapters consisting of multidisciplinary interpretive reports with accompanying plates on the geology, structure, geochronology, geophysics, hydrogeology, geochemistry, remote sensing (Landsat TM and ASTER), and SRTM and ASTER digital elevation models of Mauritania. The syntheses of these multidisciplinary data formed the basis for additional chapters containing interpretive reports on 12 different commodities and deposit types known to occur in Mauritania, accompanied by countrywide mineral resource potential maps of each commodity/deposit type. The commodities and deposit types represented include: (1) Ni, Cu, PGE, and Cr deposits hosted in ultramafic rocks; (2) orogenic, Carlin-like, and epithermal gold deposits; (3) polymetallic Pb-Zn-Cu vein deposits; (4) sediment-hosted Pb-Zn-Ag deposits of the SEDEX and Mississippi Valley-type; (5) sediment-hosted copper deposits; ( 6) volcanogenic massive sulfide deposits; (7) iron oxide copper-gold deposits; (8) uranium deposits; (9) Algoma-, Superior-, and oolitic-type iron deposits; (10) shoreline Ti-Zr placer deposits; (11) incompatible element deposits hosted in pegmatites, alkaline rocks, and carbonatites, and; (12) industrial mineral deposits. Additional chapters include the Mauritanian National Mineral Deposits Database are accompanied by an explanatory text and the Mauritania Minerals Project GIS that contains all of the interpretive layers created by USGS scientists. Raw data not in the public domain may be obtained from the Ministry of Petroleum, Energy, and Mines in Nouakchott, Mauritania.

Permissive tracts for uranium deposits in Mauritania (phase V, deliverable 80): Chapter N1 in Second projet de renforcement institutionnel du secteur minier de la République Islamique de Mauritanie (PRISM-II)

USGS Publications Warehouse

Fernette, Gregory; Horton, John D.

2012-01-01

This report contains the USGS results of the PRISM-II Mauritania Minerals Project and is presented in cooperation with the Ministry of Petroleum, Energy, and Mines of the Islamic Republic of Mauritania. The Report is composed of separate chapters consisting of multidisciplinary interpretive reports with accompanying plates on the geology, structure, geochronology, geophysics, hydrogeology, geochemistry, remote sensing (Landsat TM and ASTER), and SRTM and ASTER digital elevation models of Mauritania. The syntheses of these multidisciplinary data formed the basis for additional chapters containing interpretive reports on 12 different commodities and deposit types known to occur in Mauritania, accompanied by countrywide mineral resource potential maps of each commodity/deposit type. The commodities and deposit types represented include: (1) Ni, Cu, PGE, and Cr deposits hosted in ultramafic rocks; (2) orogenic, Carlin-like, and epithermal gold deposits; (3) polymetallic Pb-Zn-Cu vein deposits; (4) sediment-hosted Pb-Zn-Ag deposits of the SEDEX and Mississippi Valley-type; (5) sediment-hosted copper deposits; ( 6) volcanogenic massive sulfide deposits; (7) iron oxide copper-gold deposits; (8) uranium deposits; (9) Algoma-, Superior-, and oolitic-type iron deposits; (10) shoreline Ti-Zr placer deposits; (11) incompatible element deposits hosted in pegmatites, alkaline rocks, and carbonatites, and; (12) industrial mineral deposits. Additional chapters include the Mauritanian National Mineral Deposits Database are accompanied by an explanatory text and the Mauritania Minerals Project GIS that contains all of the interpretive layers created by USGS scientists. Raw data not in the public domain may be obtained from the Ministry of Petroleum, Energy, and Mines in Nouakchott, Mauritania.

Permissive tracts for nickel, copper, platinum group elements (PGE), and chromium deposits of Mauritania (phase V, deliverable 66): Chapter G1 in Second projet de renforcement institutionnel du secteur minier de la République Islamique de Mauritanie (PRISM-II)

USGS Publications Warehouse

Taylor, Cliff D.; Horton, John D.

2012-01-01

This report contains the USGS results of the PRISM-II Mauritania Minerals Project and is presented in cooperation with the Ministry of Petroleum, Energy, and Mines of the Islamic Republic of Mauritania. The Report is composed of separate chapters consisting of multidisciplinary interpretive reports with accompanying plates on the geology, structure, geochronology, geophysics, hydrogeology, geochemistry, remote sensing (Landsat TM and ASTER), and SRTM and ASTER digital elevation models of Mauritania. The syntheses of these multidisciplinary data formed the basis for additional chapters containing interpretive reports on 12 different commodities and deposit types known to occur in Mauritania, accompanied by countrywide mineral resource potential maps of each commodity/deposit type. The commodities and deposit types represented include: (1) Ni, Cu, PGE, and Cr deposits hosted in ultramafic rocks; (2) orogenic, Carlin-like, and epithermal gold deposits; (3) polymetallic Pb-Zn-Cu vein deposits; (4) sediment-hosted Pb-Zn-Ag deposits of the SEDEX and Mississippi Valley-type; (5) sediment-hosted copper deposits; ( 6) volcanogenic massive sulfide deposits; (7) iron oxide copper-gold deposits; (8) uranium deposits; (9) Algoma-, Superior-, and oolitic-type iron deposits; (10) shoreline Ti-Zr placer deposits; (11) incompatible element deposits hosted in pegmatites, alkaline rocks, and carbonatites, and; (12) industrial mineral deposits. Additional chapters include the Mauritanian National Mineral Deposits Database are accompanied by an explanatory text and the Mauritania Minerals Project GIS that contains all of the interpretive layers created by USGS scientists. Raw data not in the public domain may be obtained from the Ministry of Petroleum, Energy, and Mines in Nouakchott, Mauritania.

Restoration of Late Neoarchean-Early Cambrian tectonics in the Rengali orogen and its environs (eastern India): The Antarctic connection

NASA Astrophysics Data System (ADS)

Bhattacharya, A.; Das, H. H.; Bell, Elizabeth; Bhattacharya, Atreyee; Chatterjee, N.; Saha, L.; Dutt, A.

2016-10-01

Geological mapping and P-T path reconstructions are combined with monazite chemical age and Secondary Ion Mass Spectrometric (SIMS) U-Pb zircon age determinations to identify crustal domains with distinctive evolutionary histories in the Rengali orogen sandwiched between two Grenvillian-age metamorphic belts, i.e. the Eastern Ghats Granulite Belt (EGGB) in the south, and the amphibolite facies Gangpur Schist Belt (GSB) in the north, which in turn forms a collar along the NW/W margins of the Paleo/Mesoarchean Singhbhum Craton (SC) north of the Rengali orogen. Anatectic gneisses in the orogen core exhibit multi-phase Neoarchean/Paleoproterozoic deformation, metamorphic P-T histories and juvenile magma emplacement events. The high-grade belt is inferred to be a septum of the Bastar Craton (BC). The flanking supracrustal belt in the orogen - dominated by quartz-muscovite schists (± staurolite, kyanite, garnet pyrophyllite), inter-bedded with poorly-sorted and polymict meta-conglomerate, and meta-ultramafic/amphibolite bands - evolved along P-T paths characterized by sub-greenschist to amphibolite facies peak P-T conditions in closely-spaced samples. The supracrustal rocks and the anatectic gneisses of contrasting metamorphic P-T histories experienced D1, D2 and D3 fabric-forming events, but the high-angle obliquity between the steeply-plunging D3 folds in the anatectic gneisses and the gently-plunging D3 folds in the supracrustal unit suggests the two lithodemic units were tectonically accreted post-S2. The supracrustal belt is inferred to be a tectonic mélange formed in an accretionary wedge at the tri-junction of the Bastar Craton, the Eastern Ghats Granulite Belt and the Singhbhum Craton; the basin closure synchronous with the assembly of EGGB and the Singhbhum Craton-Gangpur Schist belt composite occurred between 510 and 610 Ma. Based on the available evidence across the facing coastlines of the Greater India landmass and the Australo-Antarctic blocks at 500 Ma, it is suggested that the EGGB welded with the Greater India landmass during the Pan African along an accretion zone, of which the Rengali orogen is a part, synchronous with the final assembly of the Gondwanaland.

What Can Modern River Profiles Tell Us about Orogenic Processes and Orogen Evolution?

NASA Astrophysics Data System (ADS)

Whipple, K. X.

2008-12-01

Numerous lines of evidence from theory, numerical simulations, and physical experiments suggest that orogen evolution is strongly coupled to atmospheric processes through the interrelationships among climate, topography, and erosion rate. In terms of orogenic processes and orogen evolution, these relationships are most important at the regional scale (mean topographic gradient, mean relief above surrounding plains) largely because crustal deformation is most sensitive to erosional unloading averaged over sufficiently long wavelengths. For this reason, and because above moderate erosion rates (> 0.2 mm/yr) hillslope form becomes decoupled from erosion rate, attention has focused on the river network, and even on particularly large rivers. We now have data that demonstrates a monotonic relationship between erosion rate and the channel steepness index (slope normalized for differences in drainage area) in a variety of field settings. Consequently, study of modern river profiles can yield useful information on recent and on-going patterns of rock uplift. It is not yet possible, however, to quantitatively isolate expected climatic and lithologic influences on this relationship. A combination of field studies and theoretical analyses are beginning to reveal the timescale of landscape response, and thus the topographic memory of past conditions. At orogen scale, river profile response to a change in rock uplift rate is on the order of 1-10 Myr. Because of these long response times, the modern profiles of large rivers and their major tributaries can potentially preserve an interpretable record of rock uplift rates since the Miocene and are insensitive to short-term climatic fluctuations. Only significant increases in rock uplift rate, however, are likely to leave a clear topographic signature. Strategies have been developed to differentiate between temporal and spatial (tectonic, climatic, or lithologic) influences on channel profile form, especially where spatially distributed data on recent incision rates is available. A more difficult question is one of cause and effect. Only in some circumstances is it possible to determine whether rivers are steep in response to localized rock uplift or whether localized rock uplift occurs in response to rapidly incising steep rivers.

Orogenic structural inheritance and rifted passive margin formation

NASA Astrophysics Data System (ADS)

Salazar Mora, Claudio A.; Huismans, Ritske S.

2016-04-01

Structural inheritance is related to mechanical weaknesses in the lithosphere due to previous tectonic events, e.g. rifting, subduction and collision. The North and South Atlantic rifted passive margins that formed during the breakup of Western Gondwana, are parallel to the older Caledonide and the Brasiliano-Pan-African orogenic belts. In the South Atlantic, 'old' mantle lithospheric fabric resulting from crystallographic preferred orientation of olivine is suggested to play a role during rifted margin formation (Tommasi and Vauchez, 2001). Magnetometric and gravimetric mapping of onshore structures in the Camamu and Almada basins suggest that extensional faults are controlled by two different directions of inherited older Brasiliano structures in the upper lithosphere (Ferreira et al., 2009). In the South Atlantic Campos Basin, 3D seismic data indicate that inherited basement structures provide a first order control on basin structure (Fetter, 2009). Here we investigate the role of structural inheritance on the formation of rifted passive margins with high-resolution 2D thermo-mechanical numerical experiments. The numerical domain is 1200 km long and 600 km deep and represents the lithosphere and the sublithospheric mantle. Model experiments were carried out by creating self-consistent orogenic inheritance where a first phase of orogen formation is followed by extension. We focus in particular on the role of varying amount of orogenic shortening, crustal rheology, contrasting styles of orogen formation on rifted margin style, and the time delay between orogeny and subsequent rifted passive formation. Model results are compared to contrasting structural styles of rifted passive margin formation as observed in the South Atlantic. Ferreira, T.S., Caixeta, J.M., Lima, F.D., 2009. Basement control in Camamu and Almada rift basins. Boletim de Geociências da Petrobrás 17, 69-88. Fetter, M., 2009. The role of basement tectonic reactivation on the structural evolution of Campos Basin, offshore Brazil: Evidence from 3D seismic analysis and section restoration. Marine and Petroleum Geology 26, 873-886. Tommasi, A., Vauchez, A., 2001. Continental rifting parallel to ancient collisional belts: An effect of the mechanical anisotropy of the lithospheric mantle. Earth and Planetary Science Letters 185, 199-210.

Petrogenesis of the Yaochong granite and Mo deposit, Western Dabie orogen, eastern-central China: Constraints from zircon U-Pb and molybdenite Re-Os ages, whole-rock geochemistry and Sr-Nd-Pb-Hf isotopes

NASA Astrophysics Data System (ADS)

Chen, Wei; Xu, Zhaowen; Qiu, Wenhong; Li, Chao; Yu, Yang; Wang, Hao; Su, Yang

2015-05-01

The Dabie orogen is among the most famous continent-continent collisional orogenic belts in the world, and is characterized by intensive post-collisional extension, magmatism and Mo mineralization. However, the genetic links between the mineralization and the geodynamic evolution of the orogen remain unresolved. In this paper, the Yaochong Mo deposit and its associated granitic stocks were investigated to elucidate this issue. Our new zircon U-Pb ages yielded an Early Cretaceous age (133.3 ± 1.3 Ma) for the Yaochong granite, and our molybdenite Re-Os dating gave a similar age (135 ± 1 Ma) for the Mo deposit. The Yaochong stock is characterized by high silica and alkali but low Mg, Fe and Ca. It is enriched in light rare earth elements (LREEs) and large ion lithophile elements (LILEs: Rb, K, Th and U), but strongly depleted in heavy REEs, and high field strength elements (HFSEs: Nb, Ta, Ti and Y). The Yaochong granite has initial 87Sr/86Sr ratios of 0.7087-0.7096, and Pb isotopic ratios of (206Pb/204Pb)i = 16.599-16.704, (207Pb/204Pb)i = 15.170-15.618 and (208Pb/204Pb)i = 36.376-38.248. The granite has εNd(t) of -18.0 to -16.3 and εHf(t) values of -26.5 to -20.0. All these data indicate that the Yaochong granite is a high-K calc-alkaline fractionated I-type granite, and may have originated from partial melting of the thickened Yangtze continental crust. The Mo ores also show low radiogenic Pb isotopes similar to the Yaochong stock. Medium Re content in molybdenite (21.8-74.8 ppm) also suggests that the ore-forming materials were derived from the thickened lower crust with possibly minor mixing with the mantle. Similar to the Eastern Dabie orogen, the thickened crust beneath the Western Dabie orogen may also have experienced tectonic collapse, which may have exerted fundamental geodynamic controls on the two-stage Mo mineralization in the region.

Geochemical evidence for Paleozoic crustal growth and tectonic conversion in the Northern Beishan Orogenic Belt, southern Central Asian Orogenic Belt

NASA Astrophysics Data System (ADS)

Yuan, Yu; Zong, Keqing; He, Zhenyu; Klemd, Reiner; Jiang, Hongying; Zhang, Wen; Liu, Yongsheng; Hu, Zhaochu; Zhang, Zeming

2018-03-01

The Beishan Orogenic Belt is located in the central southernmost part of the Central Asian Orogenic Belt (CAOB), which plays a key role in understanding the formation and evolution of the CAOB. Granitoids are the documents of crustal and tectonic evolution in orogenic belts. However, little is known regarding the petrogenesis and geodynamic setting of the widely distributed Paleozoic granitoids in the Northern Beishan Orogenic Belt (NBOB). The present study reveals significant differences concerning the petrogenesis and tectonic setting of early and late Paleozoic granitoids from the NBOB. The early Paleozoic granitoids from the 446-430 Ma Hongliuxia granite complex of the Mazongshan unit and the 466-428 Ma Shibanjing complex of the Hanshan unit show classic I-type granite affinities as revealed by the relative enrichment of LILEs and LREEs, pronounced depletions of Nb, Ta and Ti and the abundant presence of hornblende. Furthermore, they are characterized by strongly variable zircon εHf(t) values between - 16.7 and + 12.8 and evolved plagioclase Sr isotopic compositions of 0.7145-0.7253, indicating the involvement of both juvenile and ancient continental crust in the magma source. Thus, we propose that the early Paleozoic granitoids in the NBOB were generated in a subduction-related continental arc setting. In contrast, the late Paleozoic 330-281 Ma granitoids from the Shuangjingzi complex of the Hanshan unit exhibit positive zircon εHf(t) values between + 5.8 and + 13.2 and relatively depleted plagioclase Sr isotopic compositions of 0.7037-0.7072, indicating that they were mainly formed by remelting of juvenile crust. Thus, an intra-plate extensional setting is proposed to have occurred during formation of the late Paleozoic granitoids. Therefore, between the early and late Paleozoic, the magma sources of the NBOB granitoids converted from the reworking of both juvenile and ancient crusts during a subduction-induced compressional setting to the remelting of juvenile crust during an intra-plate extensional setting, respectively. The corresponding crustal growth in the southern CAOB is dominated by early Paleozoic lateral accretion of arc complexes and late Paleozoic vertical addition of juvenile material from the mantle.

Regional metamorphism at extreme conditions: Implications for orogeny at convergent plate margins

NASA Astrophysics Data System (ADS)

Zheng, Yong-Fei; Chen, Ren-Xu

2017-09-01

Regional metamorphism at extreme conditions refers either to Alpine-type metamorphism at low geothermal gradients of <10 °C/km, or to Buchan-type metamorphism at high geothermal gradients of >30 °C/km. Extreme pressures refer to those above the polymorphic transition of quartz to coesite, so that ultrahigh-pressure (UHP) eclogite-facies metamorphism occurs at mantle depths of >80 km. Extreme temperatures refer to those higher than 900 °C at crustal depths of ≤80 km, so that ultrahigh-temperature (UHT) granulite-facies metamorphism occurs at medium to high pressures. While crustal subduction at the low geothermal gradients results in blueschist-eclogite facies series without arc volcanism, heating of the thinned orogenic lithosphere brings about the high geothermal gradients for amphibolite-granulite facies series with abundant magmatism. Therefore, UHP metamorphic rocks result from cold lithospheric subduction to the mantle depths, whereas UHT metamorphic rocks are produced by hot underplating of the asthenospheric mantle at the crustal depths. Active continental rifting is developed on the thinned lithosphere in response to asthenospheric upwelling, and this tectonism is suggested as a feasible mechanism for regional granulite-facies metamorphism, with the maximum temperature depending on the extent to which the mantle lithosphere is thinned prior to the rifting. While lithospheric compression is associated with subduction metamorphism in accretionary and collisional orogens, the thinned orogenic lithosphere undergoes extension due to the asthenospheric upwelling to result in orogen-parallel rifting metamorphism and magmatism. Thus, the rifting metamorphism provides a complement to the subduction metamorphism and its operation marks the asthenospheric heating of the orogenic lithosphere. Because of the partial melting and melt extraction of the lower continental crust, contemporaneous granite-migmatite-granulite associations may serve as a petrological indicator of rifting orogeny that is superimposed on precedingly accretionary and collisional orogens. The UHT metamorphic rocks have occurred since the Archean, suggesting that the hot underplating has operated very early in the Earth's history. In contrast, the UHP metamorphic rocks primarily occur in the Phanerozoic, indicating that the thermal regime of many subduction zones has changed since the Neoproterozoic for the cold subduction.

Compressional intracontinental orogens: Ancient and modern perspectives

NASA Astrophysics Data System (ADS)

Raimondo, Tom; Hand, Martin; Collins, William J.

2014-03-01

Compressional intracontinental orogens are major zones of crustal thickening produced at large distances from active plate boundaries. Consequently, any account of their initiation and subsequent evolution must be framed outside conventional plate tectonics theory, which can only explain the proximal effects of convergent plate-margin interactions. This review considers a range of hypotheses regarding the origins and transmission of compressive stresses in intraplate settings. Both plate-boundary and intraplate stress sources are investigated as potential driving forces, and their relationship to rheological models of the lithosphere is addressed. The controls on strain localisation are then evaluated, focusing on the response of the lithosphere to the weakening effects of structural, thermal and fluid processes. With reference to the characteristic features of intracontinental orogens in central Asia (the Tien Shan) and central Australia (the Petermann and Alice Springs Orogens), it is argued that their formation is largely driven by in-plane stresses generated at plate boundaries, with the lithosphere acting as an effective stress guide. This implies a strong lithospheric mantle rheology, in order to account for far-field stress propagation through the discontinuous upper crust and to enable the support of thick uplifted crustal wedges. Alternative models of intraplate stress generation, primarily involving mantle downwelling, are rejected on the grounds that their predicted temporal and spatial scales for orogenesis are inconsistent with the observed records of deformation. Finally, inherited mechanical weaknesses, thick sedimentary blanketing over a strongly heat-producing crust, and pervasive reaction softening of deep fault networks are identified as important and interrelated controls on the ability of the lithosphere to accommodate rather than transmit stress. These effects ultimately produce orogenic zones with architectural features and evolutionary histories strongly reminiscent of typical collisional belts, suggesting that the deformational response of continental crust is remarkably similar in different tectonic settings.

What happens along the flank and corner of a continental indenter? Insights from the easternmost Himalayan orogen and constraints on the models of the India-Asia collision

NASA Astrophysics Data System (ADS)

Haproff, P. J.; Yin, A.; Zuza, A. V.

2017-12-01

Investigations of continental collisions often focus on thrust belts oriented perpendicular to the plate-convergence direction and exclude belts that bound the flanks of a continental indenter despite being crucial to understanding the collisional process. Research of the Himalayan orogen, for example, has mostly centered on the east-trending thrust belt between the eastern and western syntaxes, resulting in inadequate examination of the north-trending Indo-Burma Ranges located along the eastern margin of India. To better understand the development of the entire Himalayan orogenic system, we conducted field mapping across the Northern Indo-Burma Range (NIBR), situated at the intersection of the eastern Himalaya and Indo-Burma Ranges. Our research shows that major lithologic units and thrust faults of the Himalaya extend to the NIBR, suggesting a shared geologic evolution. The structural framework of the NIBR consists of a southwest-directed thrust belt cored by a hinterland-dipping duplex, like the Himalaya. However, the Northern Indo-Burma orogen is distinct based on (1) the absence of the Tethyan Himalayan Sequence and southern Gangdese batholith, (2) the absence of the South Tibetan detachment, (3) crustal shortening greater than 80%, (4) an incredibly narrow orogen width of 7-33 km, (5) exposure of an ophiolitic mélange complex as a klippe, (6) and right-slip shear along the active range-bounding thrust fault. Furthermore, lithospheric deformation along the flank and northeast corner of India is characterized by right-slip transpression partitioned between the thrust belt and right-slip faults. Such a regime is interpreted to accommodate both contraction and clockwise rotation of Tibetan lithosphere around India, consistent with existing continuum deformation and rotation models.

The pre-Devonian tectonic framework of Xing'an-Mongolia orogenic belt (XMOB) in north China

NASA Astrophysics Data System (ADS)

Xu, Bei; Zhao, Pan; Wang, Yanyang; Liao, Wen; Luo, Zhiwen; Bao, Qingzhong; Zhou, Yongheng

2015-01-01

A new tectonic division of the Xing'an-Mongolia orogenic belt (XMOB) in north China has been presented according to our research and a lot of new data of tectonics, geochronology and geochemistry. Four blocks and four sutures have been recognized in the XMOB, including the Erguna (EB), Xing'an-Airgin Sum (XAB), Songliao-Hunshandake (SHB), and Jiamusi (JB), and Xinlin-Xiguitu (XXS), Xilinhot-Heihe (XHS), Mudanjiang (MS) and Ondor Sum-Yongji sutures (OYS). The framework of the XMOB is characterized by a tectonic collage of the blocks and orogenic belts between them. Different Precambrian basements have been found in the blocks, including the Neoproterozoic metamorphic rocks and plutons in the EB, the Neoproterozoic metamorphic rocks in western and eastern of segments of the XAB, Mesoproterozoic and Neoproterozoic metamorphic rocks in middle segments of the XAB, respectively, the Neoproterozoic metamorphic rocks and Mesoproterozoic volcanic rocks and plutons in the SHB, and Neoproterozoic metamorphic rocks in the JB. The XXS resulted from a northwestward subduction of the XAB beneath the EB during the Cambrian, which was followed by the forming of the XHS and OYS in the northwest and south margins of the SHB in the Silurian, respectively. The MS was caused by a westward subduction of the JB beneath the east margin of the SHB during the middle Devonian. The three Cambrian, Silurian and middle Devonian events indicate that the XMOB belongs to a pre-middle Devonian multiple orogenic belt in the Central Asian Orogenic Belt (CAOB). Forming of the XMOB suggests that the southeast part of the Paleo Asian Ocean closed before the middle Devonian.

Nature and provenance of the Beishan Complex, southernmost Central Asian Orogenic Belt

NASA Astrophysics Data System (ADS)

Zheng, Rongguo; Li, Jinyi; Xiao, Wenjiao; Zhang, Jin

2018-03-01

The ages and origins of metasedimentary rocks, which were previously mapped as Precambrian, are critical in rebuilding the orogenic process and better understanding the Phanerozoic continental growth in the Central Asian Orogenic Belt (CAOB). The Beishan Complex was widely distributed in the southern Beishan Orogenic Collage, southernmost CAOB, and their ages and tectonic affinities are still in controversy. The Beishan Complex was previously proposed as fragments drifted from the Tarim Craton, Neoproterozoic Block or Phanerozoic accretionary complex. In this study, we employ detrital zircon age spectra to constrain ages and provenances of metasedimentary sequences of the Beishan Complex in the Chuanshanxun area. The metasedimentary rocks here are dominated by zircons with Paleoproterozoic-Mesoproterozoic age ( 1160-2070 Ma), and yield two peak ages at 1454 and 1760 Ma. One sample yielded a middle Permian peak age (269 Ma), which suggests that the metasedimentary sequences were deposited in the late Paleozoic. The granitoid and dioritic dykes, intruding into the metasedimentary sequences, exhibit zircon U-Pb ages of 268 and 261 Ma, respectively, which constrain the minimum deposit age of the metasedimentary sequences. Zircon U-Pb ages of amphibolite (274 and 216 Ma) indicate that they might be affected by multi-stage metamorphic events. The Beishan Complex was not a fragment drifted from the Tarim Block or Dunhuang Block, and none of cratons or blocks surrounding Beishan Orogenic Collage was the sole material source of the Beishan Complex due to obviously different age spectra. Instead, 1.4 Ga marginal accretionary zones of the Columbia supercontinent might have existed in the southern CAOB, and may provide the main source materials for the sedimentary sequences in the Beishan Complex.

Paleozoic tectonics of the Ouachita Orogen through Nd isotopes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gleason, J.D.; Patchett, P.J.; Dickinson, W.R.

1992-01-01

A combined isotopic and trace-element study of the Late Paleozoic Ouachita Orogenic belt has the following goals: (1) define changing provenance of Ouachita sedimentary systems throughout the Paleozoic; (2) constrain sources feeding into the Ouachita flysch trough during the Late Paleozoic; (3) isolate the geochemical signature of proposed colliding terranes to the south; (4) build a data base to compare with possible Ouachita System equivalents in Mexico. The ultimate aim is to constrain the tectonic setting of the southern margin of North America during the Paleozoic, with particular emphasis on collisional events leading to the final suturing of Pangea. Ndmore » isotopic data identify 3 distinct groups: (1) Ordovician passive margin sequence; (2) Carboniferous proto-flysch (Stanley Fm.), main flysch (Jackfork and Atoka Fms.) and molasse (foreland Atoka Fm.); (3) Mississippian ash-flow tuffs. The authors interpret the Ordovician signature to be essentially all craton-derived, whereas the Carboniferous signature reflects mixed sources from the craton plus orogenic sources to the east and possibly the south, including the evolving Appalachian Orogen. The proposed southern source is revealed by the tuffs to be too old and evolved to be a juvenile island arc terrane. They interpret the tuffs to have been erupted in a continental margin arc-type setting. Surprisingly, the foreland molasse sequence is indistinguishable from the main trough flysch sequence, suggesting the Ouachita trough and the craton were both inundated with sediment of a single homogenized isotopic signature during the Late Carboniferous. The possibility that Carboniferous-type sedimentary dispersal patterns began as early as the Silurian has important implications for the tectonics and paleogeography of the evolving Appalachian-Ouachita Orogenic System.« less

A new insight into Pan-African tectonics in the East-West Gondwana collision zone by U-Pb zircon dating of granites from central Madagascar

NASA Astrophysics Data System (ADS)

Nédélec, A.; Paquette, J.-L.

1998-02-01

The assembly of Gondwana was the result of a major collision orogen, the East African Orogen, between East and West Gondwana during Neoproterozoic times. Madagascar, which represents a fragment of East Gondwana, is located in a key area of this Pan-African orogen. Granites of unambiguous tectonic setting have been dated using the U-Pb zircon method in order to constrain the timing of orogenic events. The central part of Madagascar is characterized by syntectonic alkaline granitic sheets, referred to as ``stratoid'' granites. These are of both mantle and crustal derivation. Their U-Pb zircon ages are well defined between 627 and 633 Ma for both plutonic suites, regardless of either mainly mantle or crustally origin. It is not surprising that the crustally-derived suite contains inherited zircons in the 2.2-2.4 Ga range attesting to the existence of Lower Proterozoic crust in northern central Madagascar. The generation of huge amounts of granitic magma is regarded as the result of post-collision extension under a high heat flow regime. Therefore, an age between 700 and 650 Ma is inferred for the beginning of Gondwana assembly along the collision zone between central Madagascar and Kenya, i.e., in the central part of the East African Orogen. Following this, brittle fracturing of the stratoid granite series permitted the emplacement of the Ambatomiranty granitic dyke swarm at a minimum age of 560 Ma, in possible connection with a nearby shear belt. The strike-slip tectonic regime at ~570-560 Ma is well known in southern Madagascar and in its Gondwana connections. This stage corresponds to intracontinental reworking and the final suturing of Gondwana.

A new insight into Pan-African tectonics in the East-West Gondwana collision zone by U-Pb zircon dating of granites from central Madagascar

NASA Astrophysics Data System (ADS)

Paquette, Jean-Louis; Nédélec, Anne

1998-02-01

The assembly of Gondwana was the result of a major collision orogen, the East African Orogen, between East and West Gondwana during Neoproterozoic times. Madagascar, which represents a fragment of East Gondwana, is located in a key area of this Pan-African orogen. Granites of unambiguous tectonic setting have been dated using the U-Pb zircon method in order to constrain the timing of orogenic events. The central part of Madagascar is characterized by syntectonic alkaline granitic sheets, referred to as "stratoid" granites. These are of both mantle and crustal derivation. Their U-Pb zircon ages are well defined between 627 and 633 Ma for both plutonic suites, regardless of either mainly mantle or crustally origin. It is not surprising that the crustally-derived suite contains inherited zircons in the 2.2-2.4 Ga range attesting to the existence of Lower Proterozoic crust in northern central Madagascar. The generation of huge amounts of granitic magma is regarded as the result of post-collision extension under a high heat flow regime. Therefore, an age between 700 and 650 Ma is inferred for the beginning of Gondwana assembly along the collision zone between central Madagascar and Kenya, i.e., in the central part of the East African Orogen. Following this, brittle fracturing of the stratoid granite series permitted the emplacement of the Ambatomiranty granitic dyke swarm at a minimum age of 560 Ma, in possible connection with a nearby shear belt. The strike-slip tectonic regime at ˜570-560 Ma is well known in southern Madagascar and in its Gondwana connections. This stage corresponds to intracontinental reworking and the final suturing of Gondwana.

Mass elevation and lee effects markedly lift the elevational distribution of ground beetles in the Himalaya-Tibet orogen

PubMed Central

Schmidt, Joachim; Böhner, Jürgen; Brandl, Roland; Opgenoorth, Lars

2017-01-01

Mass elevation and lee effects markedly influence snow lines and tree lines in high mountain systems. However, their impact on other phenomena or groups of organisms has not yet been quantified. Here we quantitatively studied their influence in the Himalaya–Tibet orogen on the distribution of ground beetles as model organisms, specifically whether the ground beetle distribution increases from the outer to the inner parts of the orogen, against latitudinal effects. We also tested whether July temperature and solar radiation are predictors of the beetle’s elevational distribution ranges. Finally, we discussed the general importance of these effects for the distributional and evolutionary history of the biota of High Asia. We modelled spatially explicit estimates of variables characterizing temperature and solar radiation and correlated the variables with the respective lower elevational range of 118 species of ground beetles from 76 high-alpine locations. Both July temperature and solar radiation significantly positively correlated with the elevational ranges of high-alpine beetles. Against the latitudinal trend, the median elevation of the respective species distributions increased by 800 m from the Himalayan south face north to the Transhimalaya. Our results indicate that an increase in seasonal temperature due to mass elevation and lee effects substantially impact the regional distribution patterns of alpine ground beetles of the Himalaya–Tibet orogen and are likely to affect also other soil biota there and in mountain ranges worldwide. Since these effects must have changed during orogenesis, their potential impact must be considered when biogeographic scenarios based on geological models are derived. As this has not been the practice, we believe that large biases likely exist in many paleoecological and evolutionary studies dealing with the biota from the Himalaya-Tibet orogen and mountain ranges worldwide. PMID:28339461

The susceptibility of large river basins to orogenic and climatic drivers

NASA Astrophysics Data System (ADS)

Haedke, Hanna; Wittmann, Hella; von Blanckenburg, Friedhelm

2017-04-01

Large rivers are known to buffer pulses in sediment production driven by changes in climate as sediment is transported through lowlands. Our new dataset of in situ cosmogenic nuclide concentration and chemical composition of 62 sandy bedload samples from the world largest rivers integrates over 25% of Earth's terrestrial surface, distributed over a variety of climatic zones across all continents, and represents the millennial-scale denudation rate of the sediment's source area. We can show that these denudation rates do not respond to climatic forcing, but faithfully record orogenic forcing, when analyzed with respective variables representing orogeny (strain rate, relief, bouguer anomaly, free-air anomaly), and climate (runoff, temperature, precipitation) and basin properties (floodplain response time, drainage area). In contrast to this orogenic forcing of denudation rates, elemental bedload chemistry from the fine-grained portion of the same samples correlates with climate-related variables (precipitation, runoff) and floodplain response times. It is also well-known from previous compilations of river-gauged sediment loads that the short-term basin-integrated sediment export is also climatically controlled. The chemical composition of detrital sediment shows a climate control that can originate in the rivers source area, but this signal is likely overprinted during transfer through the lowlands because we also find correlation with floodplain response times. At the same time, cosmogenic nuclides robustly preserve the orogenic forcing of the source area denudation signal through of the floodplain buffer. Conversely, previous global compilations of cosmogenic nuclides in small river basins show the preservation of climate drivers in their analysis, but these are buffered in large lowland rivers. Hence, we can confirm the assumption that cosmogenic nuclides in large rivers are poorly susceptible to climate changes, but are at the same time highly suited to detect changes in orogenic forcing in their paleo sedimentary records.

Synchronous partial melting, deformation, and magmatism: evidence from in an exhumed Proterozoic orogen

NASA Astrophysics Data System (ADS)

Levine, J. S. F.; Mosher, S.

2017-12-01

Older orogenic belts that now expose the middle and lower crust record interaction between partial melting, magmatism, and deformation. A field- and microstructural-based case study from the Wet Mountains of central Colorado, an exhumed section of Proterozoic rock, shows structures associated with anatexis and magmatism, from the grain- to the kilometer-scale, that indicate the interconnection between deformation, partial melting, and magmatism, and allow reconstructions of the processes occurring in hot active orogens. Metamorphic grade, along with the degree of deformation, partial melting, and magmatism increase from northwest to southeast. Deformation synchronous with this high-grade metamorphic event is localized into areas with greater quantities of former melt, and preferential melting occurs within high-strain locations. In the less deformed northwest, partial melting occurs dominantly via muscovite-dehydration melting, with a low abundance of partial melting, and an absence of granitic magmatism. The central Wet Mountains are characterized by biotite dehydration melting, abundant former melt and foliation-parallel inferred melt channels along grain boundaries, and the presence of a nearby granitic pluton. Rocks in the southern portion of the Wet Mountains are characterized by partial melting via both biotite dehydration and granitic wet melting, with widespread partial melting as evidenced by well-preserved former melt microstructures and evidence for back reaction between melt and the host rocks. The southern Wet Mountains has more intense deformation and widespread plutonism than other locations and two generations of dikes and sills. Recognition of textures and fabrics associated with partial melting in older orogens is paramount for interpreting the complex interplay of processes occurring in the cores of orogenic systems.

The Galicia-Ossa-Morena Zone: Proposal for a new zone of the Iberian Massif. Variscan implications

NASA Astrophysics Data System (ADS)

Arenas, Ricardo; Díez Fernández, Rubén; Rubio Pascual, Francisco J.; Sánchez Martínez, Sonia; Martín Parra, Luis Miguel; Matas, Jerónimo; González del Tánago, José; Jiménez-Díaz, Alberto; Fuenlabrada, Jose M.; Andonaegui, Pilar; Garcia-Casco, Antonio

2016-06-01

Correlation of a group of allochthonous terranes (referred to as basal, ophiolitic and upper units) exposed in the NW and SW of the Iberian Massif, is used to propose a new geotectonic zone in the southern branch of the Variscan Orogen: the Galicia-Ossa-Morena Zone. Recent advances in SW Iberia identify most of the former Ossa-Morena Zone as another allochthonous complex of the Iberian Massif, the Ossa-Morena Complex, equivalent to the Cabo Ortegal, Órdenes, Malpica-Tui, Bragança and Morais complexes described in NW Iberia. The new geotectonic zone and its counterparts along the rest of the Variscan Orogen constitute an Internal Variscan Zone with ophiolites and units affected by high-P metamorphism. The Galicia-Ossa-Morena Zone includes a Variscan suture and pieces of continental crust bearing the imprint of Ediacaran-Cambrian events related to the activity of peri-Gondwanan magmatic arcs (Cadomian orogenesis). In the Iberian Massif, the general structure of this geotectonic zone represents a duplication of the Gondwanan platform, the outboard sections being juxtaposed on top of domains located closer to the mainland before amalgamation. This interpretation offers an explanation that overcomes some issues regarding the differences between the stratigraphic and paleontological record of the central and southern sections of the Iberian Massif. Also, equivalent structural relationships between other major geotectonic domains of the rest of the Variscan Orogen are consistent with our interpretation and allow suspecting similar configurations along strike of the orogen. A number of issues may be put forward in this respect that potentially open new lines of thinking about the architecture of the Variscan Orogen.

Taconic plate kinematics as revealed by foredeep stratigraphy, Appalachian Orogen

USGS Publications Warehouse

Bradley, D.C.

1989-01-01

Destruction of the Ordovician passive margin of eastern North America is recorded by an upward deepening succession of carbonates, shales, and flysch. Shelf drowning occurred first at the northern end of the orogen in Newfoundland, then at the southern end of the orogen in Georgia, and finally in Quebec. Diachronism is attributed to oblique collision between an irregular passive margin, that had a deep embayment in Quebec, and at least one east dipping subduction complex. The rate of plate convergence during collision is estimated at 1 to 2 cm/yr, and the minimum width of the ocean that closed is estimated at 500 to 900 km. The drowning isochron map provides a new basis for estimating tectonic transport distances of four of these allochthons (about 165 to 450 km), results not readily obtained by conventional structural analysis. -Author

Book Review: Book review

NASA Astrophysics Data System (ADS)

Xiao, Wenjiao

2016-06-01

This monograph book represents an important volume summarizing the present geological knowledge and understanding of the geodynamic evolution of large parts of the Central Asian Orogenic Belt (CAOB) or Altaids, which is one of the largest orogenic collages on Earth. The CAOB, like other major accretionary orogens, is a complex assembly of ancient microcontinents, arc terranes, accretionary wedges, fragments of oceanic volcanic islands (sea-mounts), oceanic plateaus, ophiolites, and shelf sediments from passive continental margins. The CAOB has caused much international attention due to its complicated architecture and considerably continental growth. However, after many years of investigations, some fundamental problems still remain controversial, such as the rate and volume of crustal growth, the origin of continental fragments, the detailed mechanism of accretion and collision, the role of terrane rotations during the orogeny, and the age and composition of the lower crust in Central Asia.

Seismic Evidence for a Geosuture between the Yangtze and Cathaysia Blocks, South China

PubMed Central

He, Chuansong; Dong, Shuwen; Santosh, M.; Chen, Xuanhua

2013-01-01

South China, composed of the Yangtze and Cathaysia Blocks and the intervening Jiangnan orogenic belt, has been central to the debate on the tectonic evolution of East Asia. Here we investigate the crustal structure and composition of South China from seismic data employing the H-k stacking technique. Our results show that the composition and seismic structure of the crust in the Jiangnan orogenic belt are identical to those of the Cathaysia Block. Our data reveal a distinct contrast in the crustal structure and composition between the two flanks of the Jiujiang-Shitai buried fault. We propose that the Jiujiang-Shitai buried fault defines a geosuture between the Yangtze and Cathaysia Blocks, and that the felsic lower crust of the Cathaysia Block and the Jiangnan orogenic belt may represent fragments derived from the Gondwana supercontinent. PMID:23857499

The naming (and misnaming) of America

USGS Publications Warehouse

Wexler, Mark

1979-01-01

Jim Jam Ridge winds for several hundred feet a long a spectacular section of the High Sierra, near the heart of northern California's Mother Lode country. According to local historians, its name dates back to a night in the late 1800s when a drunk prospector rolled into a campfire, exploding a handful of rifle shells in his pocket. The fatal incident left his two partners with a severe case of the "jim jams" a common term in those days for the "shakes" and that's how the name took hold.

Detection and mapping of volcanic rock assemblages and associated hydrothermal alteration with Thermal Infrared Multiband Scanner (TIMS) data Comstock Lode Mining District, Virginia City, Nevada

NASA Technical Reports Server (NTRS)

Taranik, James V.; Hutsinpiller, Amy; Borengasser, Marcus

1986-01-01

Thermal Infrared Multispectral Scanner (TIMS) data were acquired over the Virginia City area on September 12, 1984. The data were acquired at approximately 1130 hours local time (1723 IRIG). The TIMS data were analyzed using both photointerpretation and digital processing techniques. Karhuen-Loeve transformations were utilized to display variations in radiant spectral emittance. The TIMS image data were compared with color infrared metric camera photography, LANDSAT Thematic Mapper (TM) data, and key areas were photographed in the field.

The formation of Laurentia: Evidence from shear wave splitting

NASA Astrophysics Data System (ADS)

Liddell, Mitch V.; Bastow, Ian; Darbyshire, Fiona; Gilligan, Amy; Pugh, Stephen

2017-12-01

The northern Hudson Bay region in Canada comprises several Archean cratonic nuclei, assembled by a number of Paleoproterozoic orogenies including the Trans-Hudson Orogen (THO) and the Rinkian-Nagssugtoqidian Orogen. Recent debate has focused on the extent to which these orogens have modern analogues such as the Himalayan-Karakoram-Tibet Orogen. Further, the structure of the lithospheric mantle beneath the Hudson Strait and southern Baffin Island is potentially indicative of Paleoproterozoic underthrusting of the Superior plate beneath the Churchill collage. Also in question is whether the Laurentian cratonic root is stratified, with a fast, depleted, Archean core underlain by a slower, younger, thermally-accreted layer. Plate-scale process that create structures such as these are expected to manifest as measurable fossil seismic anisotropic fabrics. We investigate these problems via shear wave splitting, and present the most comprehensive study to date of mantle seismic anisotropy in northern Laurentia. Strong evidence is presented for multiple layers of anisotropy beneath Archean zones, consistent with the episodic development model of stratified cratonic keels. We also show that southern Baffin Island is underlain by dipping anisotropic fabric, where underthrusting of the Superior plate beneath the Churchill has previously been interpreted. This provides direct evidence of subduction-related deformation at 1.8 Ga, implying that the THO developed with modern plate-tectonic style interactions.

The Cordon del Portillo Permian magmatism, Mendoza, Argentina, plutonic and volcanic sequences at the western margin of Gondwana

NASA Astrophysics Data System (ADS)

Gregori, Daniel; Benedini, Leonardo

2013-03-01

The Cerro Punta Blanca, Cerro Bayo and Cerro Punta Negra stocks, parts of the Cordillera Frontal Composite Batholith, cropping out in the Cordón del Portillo, records the Gondwana magmatic development of the Cordillera Frontal of Mendoza, in western Argentina. In this area, the San Rafael Orogenic phase, that represents the closure of the Late Carboniferous-Early Permian marine basins, begins at 284 Ma, and ceased before 276 Ma. The Cerro Punta Blanca, Cerro Bayo and Cerro Punta Negra stocks represent a post-orogenic magmatism and are equivalents to the Choiyoi Group. The Gondwana magmatic activity in the Cordón del Portillo area can be divided into two stages. The Cerro Punta Blanca stock (c.a. 276 Ma) represents an early post-orogenic, subduction-related magmatism similar to the basic-intermediate section of the Choiyoi Group (c.a. 277 Ma). The late post-orogenic second event was recorded by the Cerro Bayo (262 Ma) and Cerro Punta Negra stocks which represent a transition between subduction-related and intra-plate magmatism. This event represents the intrusive counterpart of the acidic facies of the upper section of the Choiyoi Group (c.a. 273 Ma). This extensional condition continued during the Triassic when the Cacheuta basin developed.

Kinematic stratification in the hinterland of the central Scandinavian Caledonides

USGS Publications Warehouse

Gilotti, J.A.; Hull, J.M.

1993-01-01

A transect through west-central Norway illustrates the changing geometry and kinematics of collision in the hinterland of the central Scandinavian Caledonides. A depth section through the crust is exposed on Fosen Peninsula, comprising three tectonic units separated by two shear zones. The lowest unit, exposed in the Roan window, is a modestly deformed, Caledonian granulite complex framed by a subhorizontal de??collement, with NW-SE oriented lineations and kinematic indicators showing top-to-the-northwest transport. The middle unit, the Vestranden gneiss complex, contains relict granulites, but was penetratively deformed at amphibolite facies to produce an orogen-parallel family of structures during translation on the de??collement. Shallow plunging lineations on steep schistosities are subparallel to fold axes of the dominant, upright, non-cylindrical folds. A small component of sinistral strike slip is also recorded. In contrast, southernmost Fosen Peninsula contains an abundance of cover rocks infolded with Proterozoic basement in a fold nappe, with shallow, E-dipping schistosities, down-dip lineations, and orogen-oblique, top-to-the-west shear sense indicators. A NE-striking, sinistral shear zone separates the gneisses from southern Fosen. Deformation in the Scandian hinterland was partitioned both in space and time, with orogen-parallel extension and shear at middle structural levels and orogen-oblique transport at shallower levels. ?? 1993.

Late Paleozoic closure of the Ob-Zaisan Ocean along the Irtysh/Chara shear zone and implications for arc amalgamation and oroclinal bending in the western Central Asian Orogenic Belt

NASA Astrophysics Data System (ADS)

Li, Pengfei; Sun, Min; Rosenbaum, Gideon

2016-04-01

The Irtysh/Chara Shear Zone is one of the largest strike-slip systems in the Central Asian Orogenic Belt (CAOB). It records collisional processes of the peri-Siberian orogenic system with the West Junggar-Kazakhstan-Tianshan orogenic system following the closure of the Ob-Zaisan Ocean, but the exact timing of these events remains enigmatic. We conducted detailed structural analysis along the Irtysh Shear Zone (NW China), which together with new geochronological data allows us to reconstruct the tectonic evolution during the final closure of the Ob-Zaisan Ocean. Our results showed that subduction-accretion processes lasted at least until the Late Carboniferous in the Chinese Altai and the East/West Junggar. The subsequent arc amalgamation is characterized by a cycle of crustal thickening, orogenic collapse and transpressional thickening. On a larger scale, the West Junggar- Kazakhstan -Tianshan orogenic system defines a U-shape oroclinal structure (e.g. Xiao et al., 2010). A major phase of oroclinal bending that involved ~110° rotation may have occurred during the Late Devonian to Early Carboniferous (Levashova et al., 2012). Previous authors have linked oroclinal bending with the late Paleozoic amalgamation of the western CAOB, and proposed that a quasi-linear West Junggar- Kazakhstan -Tianshan orogenic system was buckled during the convergence of the Siberian and Tarim cratons following the closure of the Ob-Zaisan Ocean (in the north) and the South Tianshan Ocean (in the south) (e.g. Abrajevitch et al., 2008). This model, however, is not supported by our new data that constrain the closure of the Ob-Zaisan Ocean to the Late Carboniferous. Alternatively, we propose that oroclinal bending may have involved two phases of bending, with the ~110° rotation in the Late Devonian to Early Carboniferous possibly associated with trench retreat. Further tightening may have occurred in response to the convergence of the Siberian and Tarim cratons during the Late Carboniferous to Permian. References: Abrajevitch, A., Van der Voo, R., Bazhenov, M.L., Levashova, N.M., McCausland, P.J.A., 2008. The role of the Kazakhstan orocline in the late Paleozoic amalgamation of Eurasia. Tectonophysics 455, 61-76. Levashova, N., Degtyarev, K., Bazhenov, M., 2012. Oroclinal bending of the Middle and Late Paleozoic volcanic belts in Kazakhstan: Paleomagnetic evidence and geological implications. Geotectonics 46, 285-302. Xiao, W., Huang, B., Han, C., Sun, S., Li, J., 2010. A review of the western part of the Altaids: A key to understanding the architecture of accretionary orogens. Gondwana Research 18, 253-273. Acknowledgements: This study was financially supported by the Major Basic Research Project of the Ministry of Science and Technology of China (Grant: 2014CB448000 and 2014CB440801), Hong Kong Research Grant Council (HKU705311P, HKU704712P and HKU17303415), National Science Foundation of China (41273048), HKU seed funding (201111159137) and HKU CRCG grants. This work is a contribution of the Joint Laboratory of Chemical Geodynamics between HKU and CAS (Guangzhou Institute of Geochemistry), IGCP 592 and PROCORE France/Hong Kong Joint Research Scheme.

Generation of post-collisional normal calc-alkaline and adakitic granites in the Tongbai orogen, central China

NASA Astrophysics Data System (ADS)

Zhang, Wen-Xiang; Zhu, Liu-Qin; Wang, Hao; Wu, Yuan-Bao

2018-01-01

Post-collisional granites are generally generated by partial melting of continental crust during orogenic extension. The occurrence of normal calc-alkaline granites following adakitic granites in a collisional orogen is frequently supposed as a sign of tectonic regime transition from compression to extension, which has been debated yet. In this paper, we present a comprehensive study of zircon U-Pb ages, Hf-O isotopes, as well as whole-rock major and trace elements and Sr-Nd isotopes, for Tongbai and Jigongshan post-collisional granitic plutons in the Tongbai orogen. Zircon U-Pb dating yields intrusion ages of ca. 140 and 135 Ma for the Tongbai and Jigongshan plutons, respectively, suggesting they are post-collisional granites. These granites are high-K calc-alkaline series, metaluminous to weakly peraluminous with A/CNK ratios of 0.85-1.08. The Tongbai gneissic granites are normal calc-alkaline granite, having variable SiO2 (61.93-76.74 wt%) and Sr/Y (2.9-38.9) and (La/Yb)N (1.7-30.1) ratios with variably negative Eu anomalies (0.41-0.92). They have relatively high initial Sr isotope ratios of 0.707571 to 0.710317, and low εNd(t) (- 15.74 to - 11.09) and εHf(t) (- 17.6 to - 16.9) values. Their Nd and Hf model ages range from 2.2 to 1.8 Ga and 2.3 to 2.2 Ga. On the contrary, the Jigongshan granites show higher SiO2 (66.56-72.11 wt%) and Sr/Y (30.1-182.0) and (La/Yb)N (27.4-91.4) ratios with insignificant Eu anomalies (0.73-1.00), belonging to adakitic granite. They have Isr = 0.707843-0.708366, εNd(t) = - 19.83 to - 17.59, and εHf(t) = - 26.0 to - 23.5. Their Nd and Hf model ages vary from ca. 2.5 to 2.4 Ga and ca. 2.8 to 2.6 Ga. The Tongbai and Jigongshan granites are characterized by mantle-like zircon δ18O values (5.17-5.46‰). These geochemical features suggest that the Tongbai and Jigongshan granites were derived from partial melting of Paleoproterozoic and Archean continental crust, respectively. Fractional crystallization affected the geochemical compositions of the Tongbai gneissic granites, while the compositions of the Jigongshan granites were mainly controlled by partial melting. The adakitic signatures of the Jigongshan granites were either inherited from their source or ascribed to more garnet in their residues. The voluminous post-collisional granites might form by the collapse of the thickened Tongbai orogenic root. The normal Tongbai gneissic granites occurred slightly earlier than the Jigongshan adakitic granites in the Tongbai orogen, suggesting that it is not a mandate to sign the tectonic transition from adakitic to normal calc-alkaline granites in post-collisional settings. Therefore, this study provides another example supporting the burst of voluminous post-collisional granites with different compositions as a consequence of the collapse of the thickened orogenic roots of collisional orogens.

Fluid inclusion and stable isotope (O, H, C, and S) constraints on the genesis of the Serrinha gold deposit, Gurupi Belt, northern Brazil

NASA Astrophysics Data System (ADS)

Klein, Evandro L.; Harris, Chris; Renac, Christophe; Giret, André; Moura, Candido A. V.; Fuzikawa, Kazuo

2006-05-01

The Serrinha gold deposit of the Gurupi Belt, northern Brazil, belongs to the class of orogenic gold deposits. The deposit is hosted in highly strained graphitic schist belonging to a Paleoproterozoic (˜2,160 Ma) metavolcano-sedimentary sequence. The ore-zones are up to 11 m thick, parallel to the regional NW-SE schistosity, and characterized by quartz-carbonate-sulfide veinlets and minor disseminations. Textural and structural data indicate that mineralization was syn- to late-tectonic and postmetamorphic. Fluid inclusion studies identified early CO2 (CH4-N2) and CO2 (CH4-N2)-H2O-NaCl inclusions that show highly variable phase ratios, CO2 homogenization, and total homogenization temperatures both to liquid and vapor, interpreted as the product of fluid immiscibility under fluctuating pressure conditions, more or less associated with postentrapment modifications. The ore-bearing fluid typically has 18-33mol% of CO2, up to 4mol% of N2, and less than 2mol% of CH4 and displays moderate to high densities with salinity around 4.5wt% NaCl equiv. Mineralization occurred around 310 to 335°C and 1.3 to 3.0 kbar, based on fluid inclusion homogenization temperatures and oxygen isotope thermometry with estimated oxygen fugacity indicating relatively reduced conditions. Stable isotope data on quartz, carbonate, and fluid inclusions suggest that veins formed from fluids with δ18OH2O and δDH2O (310-335°C) values of +6.2 to +8.4‰ and -19 to -80‰, respectively, which might be metamorphic and/or magmatic and/or mantle-derived. The carbon isotope composition (δ13C) varies from -14.2 to -15.7‰ in carbonates; it is -17.6‰ in fluid inclusion CO2 and -23.6‰ in graphite from the host rock. The δ34S values of pyrite are -2.6 to -7.9‰. The strongly to moderately negative carbon isotope composition of the carbonates and inclusion fluid CO2 reflects variable contribution of organic carbon to an originally heavier fluid (magmatic, metamorphic, or mantle-derived) at the site of deposition and sulfur isotopes indicate some oxidation of the originally reduced fluid. The deposition of gold is interpreted to have occurred mainly in response to phase separation and fluid-rock interactions such as CO2 removal and desulfidation reactions that provoked variations in the fluid pH and redox conditions.

Microscale patterning of thermoplastic polymer surfaces by selective solvent swelling.

PubMed

Rahmanian, Omid; Chen, Chien-Fu; DeVoe, Don L

2012-09-04

A new method for the fabrication of microscale features in thermoplastic substrates is presented. Unlike traditional thermoplastic microfabrication techniques, in which bulk polymer is displaced from the substrate by machining or embossing, a unique process termed orogenic microfabrication has been developed in which selected regions of a thermoplastic surface are raised from the substrate by an irreversible solvent swelling mechanism. The orogenic technique allows thermoplastic surfaces to be patterned using a variety of masking methods, resulting in three-dimensional features that would be difficult to achieve through traditional microfabrication methods. Using cyclic olefin copolymer as a model thermoplastic material, several variations of this process are described to realize growth heights ranging from several nanometers to tens of micrometers, with patterning techniques include direct photoresist masking, patterned UV/ozone surface passivation, elastomeric stamping, and noncontact spotting. Orogenic microfabrication is also demonstrated by direct inkjet printing as a facile photolithography-free masking method for rapid desktop thermoplastic microfabrication.

The Pan-African nappe tectonics in the Shackleton Range

USGS Publications Warehouse

Buggisch, W.; Kleinschmidt, G.

2007-01-01

In memory of Campbell Craddock: When J. Campbell Craddock (1972) published his famous 1:5 000 000 map of the Geology of Antarctica, he established major units such as the East Antarctic Craton, the early Palaeozoic Ross, the Mesozoic Ellsworth, and the Cenozoic Andean orogens. It is already evident from this map, that the strike of the Ellsworth Mountains and the Shackleton Range is perpendicular to palaeo-Pacific and modern Pacific margins. While the Ellsworth-Whitmore block is classified as a rotated terrane, the Ross-aged orogen of the Shackleton Range requires another interpretation. The discovery of extended tectonic nappes with south directed transport in the southern Shackleton Range and west transport in the north established a plate tectonic scenery with a subduction dominated Ross Orogen in the Transantarctic Mountains and a transpressive tectonic regime in the Shackleton Range during the final closing of the Mozambique Ocean.

Subduction and Slab Advance at Orogen Syntaxes: Predicting Exhumation Rates and Thermochronometric Ages with Numerical Modeling

NASA Astrophysics Data System (ADS)

Nettesheim, Matthias; Ehlers, Todd A.; Whipp, David M.

2017-04-01

The change in plate boundary orientation and subducting plate geometry along orogen syntaxes may have major control on the subduction and exhumation dynamics at these locations. Previous work documents that the curvature of subducting plates in 3D at orogen syntaxes forces a buckling and flexural stiffening of the downgoing plate. The geometry of this stiffened plate region, also called indenter, can be observed in various subduction zones around the world (e.g. St. Elias Range, Alaska; Cascadia, USA; Andean syntaxis, South America). The development of a subducting, flexurally stiffened indenter beneath orogen syntaxes influences deformation in the overriding plate and can lead to accelerated and focused rock uplift above its apex. Moreover, the style of deformation in the overriding plate is influenced by the amount of trench or slab advance, which is the amount of overall shortening not accommodated by underthrusting. While many subduction zones exhibit little to no slab advance, the Nazca-South America subduction and especially the early stages of the India-Eurasia collision provide end-member examples. Here, we use a transient, lithospheric-scale, thermomechanical 3D model of an orogen syntaxis to investigate the effects of subducting a flexurally stiffened plate geometry and slab advance on upper plate deformation. A visco-plastic upper-plate rheology is used, along with a buckled, rigid subducting plate. The free surface of the thermomechanical model is coupled to a landscape evolution model that accounts for erosion by fluvial and hillslope processes. The cooling histories of exhumed rocks are used to predict the evolution of low-temperature thermochronometer ages on the surface. With a constant overall shortening for all simulations, the magnitude of slab advance is varied stepwise from no advance, with all shortening accommodated by underthrusting, to full slab advance, i.e. no motion on the megathrust. We show that in models where most shortening is accommodated by subduction, the uplift is highly localized and focused in a shape resembling the geometry of the subducting plate. Strong erosion of the growing orogen can shift the center of uplift towards the orogen flanks facing the trench. In contrast, large amounts of slab advance lead to a less focused uplift with lower maximum velocities and the uplift peak located farther away from the trench. The observed thermochronometric ages follow the uplift pattern, but indicate a significantly deeper and more rapid exhumation for models with a higher underthrusting component. These variations in amount and style of upper plate deformation may help to deepen the understanding of the different types of orogeny observed at plate corners around the world.

Mercury pollution from the artisanal mining in Yani gold district, Northern Bolivia

NASA Astrophysics Data System (ADS)

Alfonso, Pura; Freixas, Anna; Bascompta, Marc; María Aranibar, Ana; Villegas, Karla; María García-Noguero, Eva; Higueras, Pablo; Cielito Saraiva, Angela

2016-04-01

Artisanal gold mining is the main economic activity in the Yani district, Northern Bolivia. In this area abundant orogenic gold deposits constituted by quartz veins hosted in paleozoic turbiditic series that contain either free gold or associated with pyrite. Gold is recovered in processing plants by gravimetric methods using shaking tables in several communities of this district. Previously, miners ground the mineral in ball mills together with mercury. The present study aims to evaluate the effect of mercury used in the gold recovering process to the environment and human health in the Yani district. The assessment was based on the analysis of human hair, sediments and water from the river nearby the processing plant and drinking water from the fountain that supplies these communities. 47 samples of hair from miners and other people from the Yani and Señor de Mayo communities were obtained in 2014 and 52 samples in 2015. All were analysed to evaluate the mercury exposure in these places. The results from the 2014 sampling show a wide range of Hg concentration in hair, especially in Señor de Mayo, with values up to 136 μg/g THg. However, in 2015 among the 43 residents in Señor de Mayo, 29 (67%) exhibit concentrations higher than 2 μg/g THg, with an average value of 5.36 μg/g THg. On the other hand, in Yani only 40% have concentrations above 2 μg/g THg, with an average value of 2.34 μg/g THg. The content in Hg in most of the hair samples exhibit values above the tolerable limits established by the US Environmental Protection Agency (1 μg/g Hg) and the World Health Organisation (WHO, 2 μg/g Hg). These high Hg concentrations are found not only in miners but also in the other members of the community, in spite of low fish consumption in this area. Part of the hair was analysed before and after cleaning. Usually in the second case the content of Hg is reduced, but still show high Hg levels, then probably the atmosphere is polluted with Hg and population is exposed to Hg vapour. The average of Hg contents in hair from Señor de Mayo is double than in Yani. This can be explained because in the former the processing plant is located much closer to the community. The THg concentration in water from the river vary from 0.12 to 0.22 μg/g THg and from the drinking water display values around 0.22 μg/g THg, both below the tolerable limits indicated by the WHO. THg levels in sediments collected in river near the processing plant of Señor de Mayo and Yani show high Hg concentrations, 2.4 and 5.9 μg/g, respectively, which represent a serious environmental risk. Most of the obtained values of mercury concentration in hair indicate a high level of pollution. The miners of these areas should find out alternative methods for gold recovery. Acknowledgements: This research was financed by the Centre de Cooperació pel Desenvolupament projects 2014-O014 and 2015-O-022.

Mineral resources of Elko County, Nevada

USGS Publications Warehouse

Smith, Roscoe Maurice

1976-01-01

Of the 66 named mining districts in Elko County, 56 have been productive of one or more of 19 different commodities: 11 metals--copper, gold, silver, lead, zinc, mercury, tungsten, manganese, iron, uranium, and antimony; 8 nonmetals--sand and gravel, stone, barite, diatomite, gems, oil shale, volcanic ash, and clay. In addition to the commodities produced, at least 5 others--beryllium, molybdenum, tin, phosphorite, and petroleum, occur in amounts sufficient to warrant exploration. The other districts have been explored, but no production has been recorded. Total value-when-sold of production recorded through 1969 was nearly $91 million; actual production was considerably greater, especially if sand and gravel, barite, and other nonmetallic products before 1953 are included. In value of metals produced, the five highest districts are Mountain City ($26 million), Tuscarora ($11 million), Jarbidge ($10 million), Aura ($6 million), and Railroad (nearly $5 million). The Rio Tinto copper mine in the Mountain City district yielded $21 million. Of the 17 districts that produced nonmetallic minerals, Bootstrap .is the largest producer, containing the Rossi mine, one of the two largest barite mines in the United States. Most of /he metals produced name from veins and replacement deposits in limestone or dolomite near granitic stocks; exceptions are manganese and mercury, which are not associated with known or inferred stocks; mercury is further excepted because it occurs in volcanic rocks, as do a few deposits of the major metals. The largest deposit--the Rio Tinto lode--was a combination of fissure filling and replacement along a bedding plane shear zone 150 ft wide and 1,200 ft long in carbonaceous shale of the Valmy Formation; this deposit is apparently older than the Mountain City stock and its mineralization may be related to Paleozoic mafic volcanism later than a major thrust fault, inferred to underlie the area at a depth of about 5,000 ft. Most of the nonmetallic minerals mined were sedimentary bedded deposits, but mica was mined from pegmatite deposits, and turquoise from both placer and hydrothermal deposits. The largest known reserves of metals (1973) are of porphyry copper in the Dolly Varden district and gold in the Bootstrap district. Reserves of barite also are presumed to be large. The greatest potential for future production of metals, notably copper and gold, appears to be in the known districts or extensions of them and peripheral to deposits that are related to known or concealed plutons and thrust faults. Potential resources in deposits too low in grade to be worked profitably at the present time include all commodities that have been produced and, in addition, known, deposits of beryllium, molybdenum, tin, and phosphorite. Speculative resources in undiscovered deposits may reasonably be predicted to include all known commodities as well as others that are unsuspected. Petroleum may yet be produced from the Elko Formation and geothermal energy from the Ruby Valley and Elko areas.

Melting of subducted continental crust: Geochemical evidence from Mesozoic granitoids in the Dabie-Sulu orogenic belt, east-central China

NASA Astrophysics Data System (ADS)

Zhao, Zi-Fu; Liu, Zhi-Bin; Chen, Qi

2017-09-01

Syn-collisional and postcollisional granitoids are common in collisional orogens, and they were primarily produced by partial melting of subducted continental crust. This is exemplified by Mesozoic granitoids from the Dabie-Sulu orogenic belt in east-central China. These granitoids were emplaced in small volumes in the Late Triassic (200-206 Ma) and the Late Jurassic (146-167 Ma) but massively in the Early Cretaceous (111-143 Ma). Nevertheless, all of them exhibit arc-like trace element distribution patterns and are enriched in Sr-Nd-Hf isotope compositions, indicating their origination from the ancient continental crust. They commonly contain relict zircons with Neoproterozoic and Triassic U-Pb ages, respectively, consistent with the protolith and metamorphic ages for ultrahigh-pressure (UHP) metaigneous rocks in the Dabie-Sulu orogenic belt. Some granitoids show low zircon δ18O values, and SIMS in-situ O isotope analysis reveals that the relict zircons with Neoproterozoic and Triassic U-Pb ages also commonly exhibit low δ18O values. Neoproterozoic U-Pb ages and low δ18O values are the two diagnostic features that distinguish the subducted South China Block from the obducted North China Block. Thus, the magma source of these Mesozoic granitoids has a genetic link to the subducted continental crust of the South China Block. On the other hand, these granitoids contain relict zircons with Paleoproterozoic and Archean U-Pb ages, which are present in both the South and North China Blocks. Taken together, the Mesozoic granitoids in the Dabie-Sulu orogenic belt and its hanging wall have their magma sources that are predominated by the continental crust of the South China Block with minor contributions from the continental crust of the North China Block. The Triassic continental collision between the South and North China Blocks brought the continental crust into the thickened orogen, where they underwent the three episodes of partial melting in the Late Triassic, Late Jurassic and Early Cretaceous, respectively, for granitic magmatism. While partial melting in the Late Triassic is responsible for syn-exhumation magmatism, the Late Jurassic and Early Cretaceous granitoids are independent of the continental collision and thus belong to postcollisional magmatism.

The effect of flexural isostasy on the response time of orogenic systems

NASA Astrophysics Data System (ADS)

Braun, J.; Margirier, A.; Guerit, L.

2017-12-01

The concept of orogenic steady-state implies that mountain belts can reach a dynamic balance between uplift and erosion in order to maintain a quasi-constant shape. The final morphology of the mountain will be a function of the relative efficiency between uplift and erosion and is therefore likely to be modulated by climate. However, reaching such a steady-state cannot be instantaneous and there must exist a time lag between the onset of convergence and the full development of the mountain topography. Similarly, when an orogenic system is subject to a marked change in convergence rate or in climatic conditions, it takes a certain time for it to adapt to such a change and develop a new steady-state morphology. It is during these transient phases that the nature and efficiency of the interactions between tectonics and climate are most likely to be constrained by observations and understood. The duration of this transient stage remains, however, poorly constrained and understood. As shown by many authors (Whipple and Tucker, 1999, for example) the rate at which tectonic systems evolve to reach steady-state is likely controlled by climate and rock strength, which both determine the efficiency of erosional processes, and the rate of uplift. Here we show that isostasy also plays a very important role in determining the length of the transient phase and that, depending on the level of isostatic adjustment, which in turn depends on the flexural strength of the underlying lithosphere, isostasy can change the time it takes for an orogenic system to reach steady-state by an order of magnitude, i.,e. from a few millions to a few tens of millions of years. This has very important implications. It may explain why many young orogenic systems display an increase in uplift and erosion rate millions of years after the onset of collision and that, in these situations, such an increase does not require a steady change in tectonic and/or climate conditions/forcing. We also show that this "isostatic buffering" of orogenic response to abrupt changes in tectonic or climatic perturbations can not only lengthen the duration of the transient period, but also dampen the amplitude of the resulting erosional flux. This makes it sometimes difficult to extract the signature of these events from the sedimentary record.

Estimates of late Cenozoic climate change relevant to Earth surface processes in tectonically active orogens

NASA Astrophysics Data System (ADS)

Mutz, Sebastian G.; Ehlers, Todd A.; Werner, Martin; Lohmann, Gerrit; Stepanek, Christian; Li, Jingmin

2018-04-01

The denudation history of active orogens is often interpreted in the context of modern climate gradients. Here we address the validity of this approach and ask what are the spatial and temporal variations in palaeoclimate for a latitudinally diverse range of active orogens? We do this using high-resolution (T159, ca. 80 × 80 km at the Equator) palaeoclimate simulations from the ECHAM5 global atmospheric general circulation model and a statistical cluster analysis of climate over different orogens (Andes, Himalayas, SE Alaska, Pacific NW USA). Time periods and boundary conditions considered include the Pliocene (PLIO, ˜ 3 Ma), the Last Glacial Maximum (LGM, ˜ 21 ka), mid-Holocene (MH, ˜ 6 ka), and pre-industrial (PI, reference year 1850). The regional simulated climates of each orogen are described by means of cluster analyses based on the variability in precipitation, 2 m air temperature, the intra-annual amplitude of these values, and monsoonal wind speeds where appropriate. Results indicate the largest differences in the PI climate existed for the LGM and PLIO climates in the form of widespread cooling and reduced precipitation in the LGM and warming and enhanced precipitation during the PLIO. The LGM climate shows the largest deviation in annual precipitation from the PI climate and shows enhanced precipitation in the temperate Andes and coastal regions for both SE Alaska and the US Pacific Northwest. Furthermore, LGM precipitation is reduced in the western Himalayas and enhanced in the eastern Himalayas, resulting in a shift of the wettest regional climates eastward along the orogen. The cluster-analysis results also suggest more climatic variability across latitudes east of the Andes in the PLIO climate than in other time slice experiments conducted here. Taken together, these results highlight significant changes in late Cenozoic regional climatology over the last ˜ 3 Myr. Comparison of simulated climate with proxy-based reconstructions for the MH and LGM reveal satisfactory to good performance of the model in reproducing precipitation changes, although in some cases discrepancies between neighbouring proxy observations highlight contradictions between proxy observations themselves. Finally, we document regions where the largest magnitudes of late Cenozoic changes in precipitation and temperature occur and offer the highest potential for future observational studies that quantify the impact of climate change on denudation and weathering rates.

A Review of Recent Developments in the Study of Regional Lithospheric Electrical Structure of the Asian Continent

NASA Astrophysics Data System (ADS)

Zhang, Letian

2017-09-01

The Asian continent was formed through the amalgamation of several major continental blocks that were formerly separated by the Paleo-Asian and Tethyan Oceans. During this process, the Asian continent underwent a long period of continental crustal growth and tectonic deformation, making it the largest and youngest continent on Earth. This paper presents a review of the application of geophysical electromagnetic methods, mainly the magnetotelluric (MT) method, in recent investigations of the diverse tectonic features across the Asian continent. The case studies cover the major continental blocks of Asia, the Central Asian orogenic system, the Tethyan orogenic system, as well as the western Pacific subduction system. In summary, most of the major continental blocks of Asia exhibit a three-layer structure with a resistive upper crust and upper mantle and a relatively conductive mid-lower crust. Large-scale conductors in the upper mantle were interpreted as an indication of lithospheric modification at the craton margins. The electrical structure of the Central Asian orogenic system is generally more resistive than the bordering continental blocks, whereas the Tethyan orogenic system displays more conductive, with pervasive conductors in the lower crust and upper mantle. The western Pacific subduction system shows increasing complexity in its electrical structure from its northern extent to its southern extent. In general, the following areas of the Asian continent have increasingly conductive lithospheric electrical structures, which correspond to a transition from the most stable areas to the most active tectonic areas of Asia: the major continental blocks, the accretionary Central Asian orogenic system, the collisional Tethyan orogenic system, and the western Pacific subduction system. As a key part of this review, a three-dimensional (3-D) model of the lithospheric electrical structure of a large portion of the Tibetan Plateau is presented and discussed in detail; the model indicates tearing of the underthrusting Indian slab as well as complex crustal conductor geometries, which are not obviously consistent with the hypothesis of a continuous, eastward channel flow. These studies have greatly enhanced our knowledge of the formation and deformation processes of the Asian continent. Lastly, future research to expand field data coverage, improve related techniques, and integrate data from other disciplines is suggested.

Controlling factors of spatial and temporal preservation of the geochronological signal in sediments during an orogenic cycle

NASA Astrophysics Data System (ADS)

Rat, Juliette; Mouthereau, Frédéric; Bernet, Matthias; Brichau, Stéphanie; Balvay, Mélanie; Garzanti, Eduardo; Ando, Sergio

2017-04-01

Detrital content of sediments preserved in basins provide constraints on the nature of source rocks, dynamics of sediment transport, and potentially on tectonics and climate changes. U-Pb dating method on detrital zircon is ideally suited for provenance studies due to the ability of U-Pb age data to resist several orogenic cycles. However, with the aim to track sediment source evolution over a single orogenic cycle and determine characteristic time and parameters controlling the geochronological signal preservation throughout the cycle from rifting, mountain building to post-collision evolution, low-temperature thermochronology combined with sediment petrography are more appropriate than the U-Pb dating approach taken alone. To better understanding processes at play in the long-term geochronological signal preservation we focus on the sediment record associated with the Iberia plate tectonic evolution, which is part of the OROGEN research project, co-financed by BRGM, TOTAL & CNRS. The Iberian plate recorded a period of extension in the Late Jurassic, followed during the Early Cretaceous (Aptian-Albian) by a major thinning event documented by thick syn-rift sediments in intraplate basins and plate-scale heating/cooling of the Iberia crust, as argued by published fission track ages. Paleogeographic reconstructions that are based on stratigraphic and lithofacies analyses in northern Iberia (Iberian Range, Pyrenees and Basque-Cantabrians Range), describe a large domain of continental/fluvial and shallow-marine siliciclastic deposition. The related detrital content was then recycled during the subsequent Pyrenean orogenic phase in the Ebro foreland basin, and eventually transfer to the Mediterranean realm during post-orogenic re-excavation of the Ebro basin. In this study, we complete the published time-temperature paths in the mesozoic syn-rift basins by providing new thermo-chronological analyses of well-dated syn-collision and post-collision stratigraphic sections of the Ebro basin to determine thermal control on preservation through burial and geothermal evolution. We combined this study with sediments petrography analyses to identify relative control of source petrography, hydraulic sorting, alteration and diagenesis processes on the signal preservation during sediment transfer. All these observations will ultimately be incorporated in a geodynamic reconstruction of Iberia, and compared with age predictions from a model coupling surface processes and thermal evolution.

Pyrite deformation and connections to gold mobility: Insight from micro-structural analysis and trace element mapping

NASA Astrophysics Data System (ADS)

Dubosq, R.; Lawley, C. J. M.; Rogowitz, A.; Schneider, D. A.; Jackson, S.

2018-06-01

The metamorphic transition of pyrite to pyrrhotite results in the liberation of lattice-bound and nano-particulate metals initially hosted within early sulphide minerals. This process forms the basis for the metamorphic-driven Au-upgrading model applied to many orogenic Au deposits, however the role of syn-metamorphic pyrite deformation in controlling the retention and release of Au and related pathfinder elements is poorly understood. The lower amphibolite facies metamorphic mineral assemblage (Act-Bt-Pl-Ep-Alm ± Cal ± Qz ± Ilm; 550 °C) of Canada's giant Detour Lake deposit falls within the range of pressure-temperature conditions (450 °C) for crystal plastic deformation of pyrite. We have applied a complementary approach of electron backscatter diffraction (EBSD) mapping and laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) 2D element mapping on pyrite from the Detour Lake deposit. Chemical element maps document an early generation of Au-rich sieve textured pyrite domains and a later stage of syn-metamorphic oscillatory-zoned Au-poor pyrite. Both pyrite types are cut by Au-rich fractures as a consequence of remobilization of Au with trace element enrichment of first-row transition elements, post-transition metals, chalcogens and metalloids during a late brittle deformation stage. However, similar enrichment in trace elements and Au can be observed along low-angle grain boundaries within otherwise Au-poor pyrite, indicating that heterogeneous microstructural misorientation patterns and higher strain domains are also relatively Au-rich. We therefore propose that the close spatial relationship between pyrite and Au at the microscale, features typical of orogenic Au deposits, reflects the entrapment of Au within deformation-induced microstructures in pyrite rather than the release of Au during the metamorphic transition from pyrite to pyrrhotite. Moreover, mass balance calculations at the deposit scale suggest that only a small percentage of Au could have been sourced from pyrite and instead point to the role of substructures in pyrite as depositional traps for Au during syn-metamorphic deformation- and fluid-assisted diffusion Au-upgrading.

Crustal surface wave velocity structure of the east Albany-Fraser Orogen, Western Australia, from ambient noise recordings

NASA Astrophysics Data System (ADS)

Sippl, C.; Kennett, B. L. N.; Tkalčić, H.; Gessner, K.; Spaggiari, C. V.

2017-09-01

Group and phase velocity maps in the period range 2-20 s for the Proterozoic east Albany-Fraser Orogen, Western Australia, are extracted from ambient seismic noise recorded with the 70-station ALFREX array. This 2 yr temporary installation provided detailed coverage across the orogen and the edge of the Neoarchean Yilgarn Craton, a region where no passive seismic studies of this scale have occurred to date. The surface wave velocities are rather high overall (>3 km s-1 nearly everywhere), as expected for exposed Proterozoic basement rocks. No clear signature of the transition between Yilgarn Craton and Albany-Fraser Orogen is observed, but several strong anomalies corresponding to more local geological features were obtained. A prominent, NE-elongated high-velocity anomaly in the northern part of the array is coincident with a Bouguer gravity high caused by the upper crustal metamorphic rocks of the Fraser Zone. This feature disappears towards longer periods, which hints at an exclusively upper crustal origin for this anomaly. Further east, the limestones of the Cenozoic Eucla Basin are clearly imaged as a pronounced low-velocity zone at short periods, but the prevalence of low velocities to periods of ≥5 s implies that the uppermost basement in this area is likewise slow. At longer periods, slightly above-average surface wave velocities are imaged below the Eucla Basin.

Unfolding the arc: The use of pre-orogenic constraints to assess the evolution of the Variscan belt in Western Europe

NASA Astrophysics Data System (ADS)

Casas, Josep M.; Brendan Murphy, J.

2018-06-01

We present a pre-orogenic, early Paleozoic, palinspastic reconstruction of the northern Gondwana margin that was subsequently involved in the Late Paleozoic Variscan orogeny in central and Western Europe. Our reconstruction is based on two pre-orogenic data sets, the age and distribution of Cambrian-Ordovician magmatism and the detrital zircon age signature of late Neoproterozoic-early Paleozoic clastic rocks. We obtain this reconstruction by unfolding the Ibero-Armorican arc and by restoring the movement of the large-scale dextral strike-slip faults that transect the different tectono-stratigraphic units. Our results favour an irregular shape for this part of the northern Gondwana margin with a N-S central segment linking two E-W oriented segments. The proposed reconstruction and the structural restoration of the main features of Variscan deformation is in accordance with some aspects of previously proposed structural models, such as the curved geometry of the Gondwanan margin required by the indentor model for continental collision, the role played by the large strike-slip faults in dispersing formerly juxtaposed units, and the regional-scale oroclinal folding of part of this margin during late Carboniferous-Early Permian times. The combined use of the pre-orogenic geological constraints and palinspastic restoration is a useful approach that may provide a foundation for continual refinement of reconstructions as more data become available.

Magnitude of crustal shortening and structural framework of the easternmost Himalayan orogen, northern Indo-Burma Ranges of northeastern India

NASA Astrophysics Data System (ADS)

Haproff, P. J.; Yin, A.

2016-12-01

Along-strike variation in crustal shortening throughout the Himalayan orogen has been attributed to (1) diachronous, eastward-increasing convergence, or (2) localized controls including pre-collisional stratigraphic configuration and climate. In this study, we present new geologic maps and balanced cross-sections across the easternmost segment of the Himalayan orogen, the N-S-trending N. Indo-Burma Ranges of northeastern India. First order structures are NE-dipping, km-wide ductile thrust shear zones with mylonitic fabrics indicating top-to-the SW motion. Major structures include the Mayodia klippe and Hunli window, generated during folding of the SW-directed Tidding thrust and duplexing of Lesser Himalayan rocks (LHS) at depth. Reconstruction of two balanced cross-sections yields minimum shortening estimates of 70% (48 km) and 71% (133 km), respectively. The widths of the orogen for each transect are 21 km and 54 km, respectively. Our percent strain values are comparable to that of western Arunachal Himalaya, reflecting eastward-increasing strain due to counterclockwise rotation of India during convergence or along-strike variation in India's subduction angle. However, shortening magnitudes much less than that of the Sikkim (641 km), Bhutan (414-615 km), and western Arunachal Himalaya (515-775 km) could signal eastward increasing shortening of a unique Himalayan stratigraphic framework, evidenced by few GHC rocks, absence of Tethyan strata, and an extensive subduction mélange and forearc complex.

40 Ma of hydrothermal W mineralization during the Variscan orogenic evolution of the French Massif Central revealed by U-Pb dating of wolframite

NASA Astrophysics Data System (ADS)

Harlaux, Matthieu; Romer, Rolf L.; Mercadier, Julien; Morlot, Christophe; Marignac, Christian; Cuney, Michel

2018-01-01

We present U-Pb thermal ionization mass spectrometer (TIMS) ages of wolframite from several granite-related hydrothermal W±Sn deposits in the French Massif Central (FMC) located in the internal zone of the Variscan belt. The studied wolframite samples are characterized by variable U and Pb contents (typically <10 ppm) and show significant variations in their radiogenic Pb isotopic compositions. The obtained U-Pb ages define three distinct geochronological groups related to three contrasting geodynamic settings: (i) Visean to Namurian mineralization (333-327 Ma) coeval with syn-orogenic compression and emplacement of large peraluminous leucogranites (ca. 335-325 Ma), (ii) Namurian to Westphalian mineralization (317-315 Ma) synchronous with the onset of late-orogenic extension and emplacement of syn-tectonic granites (ca. 315-310 Ma) and (iii) Stephanian to Permian mineralization (298-274 Ma) formed during post-orogenic extension contemporaneous with the Permian volcanism in the entire Variscan belt. The youngest ages (276-274 Ma) likely reflect the reopening of the U-Pb isotopic system after wolframite crystallization and may correspond to late hydrothermal alteration (e.g. ferberitization). Our results demonstrate that W(±Sn) mineralization in the FMC formed during at least three distinct hydrothermal events in different tectono-metamorphic settings over a time range of 40 Ma.

Deformation Partitioning: The Missing Link Between Outcrop-Scale Observations And Orogen-Scale Processes

NASA Astrophysics Data System (ADS)

Attia, S.; Paterson, S. R.; Jiang, D.; Miller, R. B.

2017-12-01

Structural studies of orogenic deformation fields are mostly based on small-scale structures ubiquitous in field exposures, hand samples, and under microscopes. Relating deformation histories derived from such structures to changing lithospheric-scale deformation and boundary conditions is not trivial due to vast scale separation (10-6 107 m) between characteristic lengths of small-scale structures and lithospheric plates. Rheological heterogeneity over the range of orogenic scales will lead to deformation partitioning throughout intervening scales of structural development. Spectacular examples of structures documenting deformation partitioning are widespread within hot (i.e., magma-rich) orogens such as the well-studied central Sierra Nevada and Cascades core of western North America: (1) deformation partitioned into localized, narrow, triclinic shear zones separated by broad domains of distributed pure shear at micro- to 10 km scales; (2) deformation partitioned between plutons and surrounding metamorphic host rocks as shown by pluton-wide magmatic fabrics consistently oriented differently than coeval host rock fabrics; (3) partitioning recorded by different fabric intensities, styles, and orientations established from meter-scale grid mapping to 100 km scale domainal analyses; and (4) variations in the causes of strain and kinematics within fold-dominated domains. These complex, partitioned histories require synthesized mapping, geochronology, and structural data at all scales to evaluate partitioning and in the absence of correct scaling can lead to incorrect interpretations of histories. Forward modeling capable of addressing deformation partitioning in materials containing multiple scales of rheologically heterogeneous elements of varying characteristic lengths provides the ability to upscale the large synthesized datasets described above to plate-scale tectonic processes and boundary conditions. By comparing modeling predictions from the recently developed self-consistent Multi-Order Power-Law Approach (MOPLA) to multi-scale field observations, we constrain likely paleo-tectonic controls of orogenic structural evolution rather than predicting a unique, but likely incorrect deformation history.

Topographic evolution of orogens: The long term perspective

NASA Astrophysics Data System (ADS)

Robl, Jörg; Hergarten, Stefan; Prasicek, Günther

2017-04-01

The landscape of mountain ranges reflects the competition of tectonics and climate, that build up and destroy topography, respectively. While there is a broad consensus on the acting processes, there is a vital debate whether the topography of individual orogens reflects stages of growth, steady-state or decay. This debate is fuelled by the million-year time scales hampering direct observations on landscape evolution in mountain ranges, the superposition of various process patterns and the complex interactions among different processes. In this presentation we focus on orogen-scale landscape evolution based on time-dependent numerical models and explore model time series to constrain the development of mountain range topography during an orogenic cycle. The erosional long term response of rivers and hillslopes to uplift can be mathematically formalised by the stream power and mass diffusion equations, respectively, which enables us to describe the time-dependent evolution of topography in orogens. Based on a simple one-dimensional model consisting of two rivers separated by a watershed we explain the influence of uplift rate and rock erodibility on steady-state channel profiles and show the time-dependent development of the channel - drainage divide system. The effect of dynamic drainage network reorganization adds additional complexity and its effect on topography is explored on the basis of two-dimensional models. Further complexity is introduced by coupling a mechanical model (thin viscous sheet approach) describing continental collision, crustal thickening and topography formation with a stream power-based landscape evolution model. Model time series show the impact of crustal deformation on drainage networks and consequently on the evolution of mountain range topography (Robl et al., in review). All model outcomes, from simple one-dimensional to coupled two dimensional models are presented as movies featuring a high spatial and temporal resolution. Robl, J., S. Hergarten, and G. Prasicek (in review), The topographic state of mountain ranges, Earth Science Reviews.

The distribution, geochronology and geochemistry of early Paleozoic granitoid plutons in the North Altun orogenic belt, NW China: Implications for the petrogenesis and tectonic evolution

NASA Astrophysics Data System (ADS)

Meng, Ling-Tong; Chen, Bai-Lin; Zhao, Ni-Na; Wu, Yu; Zhang, Wen-Gao; He, Jiang-Tao; Wang, Bin; Han, Mei-Mei

2017-01-01

Abundant early Paleozoic granitoid plutons are widely distributed in the North Altun orogenic belt. These rocks provide clues to the tectonic evolution of the North Altun orogenic belt and adjacent areas. In this paper, we report an integrated study of petrological features, U-Pb zircon dating, in situ zircon Hf isotope and whole-rock geochemical compositions for the Abei, 4337 Highland and Kaladawan Plutons from north to south in the North Altun orogenic belt. The dating yielded magma crystallization ages of 514 Ma for the Abei Pluton, 494 Ma for the 4337 Highland Pluton and 480-460 Ma for the Kaladawan Pluton, suggesting that they are all products of oceanic slab subduction because of the age constraint. The Abei monzogranites derived from the recycle of Paleoproterozoic continental crust under low-pressure and high-temperature conditions are products of subduction initiation. The 4337 Highland granodiorites have some adakitic geochemical signatures and are sourced from partial melting of thickened mafic lower continental crust. The Kaladawan quartz diorites are produced by partial melting of mantle wedge according to the positive εHf(t) values, and the Kaladawan monzogranite-syenogranite are derived from partial melting of Neoproterozoic continental crust mixing the juvenile underplated mafic material from the depleted mantle. These results, together with existing data, provide significant information about the evolution history of oceanic crust subduction during the 520-460 Ma. The initiation of subduction occurred during 520-500 Ma with formation of Abei Pluton; subsequent transition from steep-angle to flat-slab subduction at ca.500 Ma due to the arrival of buoyant oceanic plateaus, which induces the formation of 4337 Highland Pluton. With ongoing subduction, the steep-angle subduction system is reestablished to cause the formation of 480-460 Ma Kaladawan Pluton. Meanwhile, it is this model that account for the temporal-spatial distribution of these early Paleozoic magmatic rocks in the North Altun orogenic belt.

Role of Neogene Exhumation and Sedimentation on Critical-Wedge Kinematics in the Zagros Orogenic Belt, Northeastern Iraq, Kurdistan

NASA Astrophysics Data System (ADS)

Koshnaw, R. I.; Horton, B. K.; Stockli, D. F.; Barber, D. E.; Tamar-Agha, M. Y.; Kendall, J. J.

2014-12-01

The Zagros orogenic belt and foreland basin formed during the Cenozoic Arabia-Eurasia collision, but the precise histories of shortening and sediment accumulation remain ambiguous, especially at the NW extent of the fold-thrust belt in Iraqi Kurdistan. This region is characterized by well-preserved successions of Cenozoic clastic foreland-basin fill and deformed Paleozoic-Mesozoic hinterland bedrock. The study area provides an excellent opportunity to investigate the linkage between orogenic wedge behavior and surface processes of erosion and deposition. The aim of this research is to test whether the Zagros orogenic wedge advanced steadily under critical to supercritical wedge conditions involving in-sequence thrusting with minimal erosion or propagated intermittently under subcritical condition involving out-of-sequence deformation with intense erosion. These endmember modes of mountain building can be assessed by integrating geo/thermochronologic and basin analyses techniques, including apatite (U-Th)/He thermochronology, detrital zircon U-Pb geochronology, stratigraphic synthesis, and seismic interpretations. Preliminary apatite (U-Th)/He data indicate activation of the Main Zagros Fault (MZF) at ~10 Ma with frontal thrusts initiating at ~8 Ma. However, thermochronometric results from the intervening Mountain Front Flexure (MFF), located between the MZF and the frontal thrusts, suggest rapid exhumation at ~6 Ma. These results suggest that the MFF, represented by the thrust-cored Qaradagh anticline, represents a major episode of out-of-sequence deformation. Detrital zircon U-Pb analyses from the Neogene foreland-basin deposits show continuous sediment derivation from sources to the NNE in Iraq and western Iran, suggesting that out-of-sequence thrusting did not significantly alter sedimentary provenance. Rather, intense hinterland erosion and recycling of older foreland-basin fill dominated sediment delivery to the basin. The irregular distribution of thermochronologic ages, hinterland growth, extensive erosion, and recycled sediment in the Neogene foreland basin imply that the Zagros orogenic wedge in the Iraqi Kurdistan region largely developed under subcritical wedge conditions.

Age and provenance constraints on seismically-determined crustal layers beneath the Paleozoic southern Central Asian Orogen, Inner Mongolia, China

NASA Astrophysics Data System (ADS)

Jian, Ping; Kröner, Alfred; Shi, Yuruo; Zhang, Wei; Liu, Yaran; Windley, Brian F.; Jahn, Bor-ming; Zhang, Liqao; Liu, Dunyi

2016-06-01

We present 110 ages and 51 in-situ δ18O values for zircon xenocrysts from a post-99 Ma intraplate basaltic rock suite hosted in a subduction-accretion complex of the southern Central Asian Orogenic Belt in order to constrain a seismic profile across the Paleozoic Southern Orogen of Inner Mongolia and the northern margin of the North China Craton. Two zircon populations are recognized, namely a Phanerozoic group of 70 zircons comprising granitoid-derived (ca. 431-99 Ma; n = 31; peak at 256 Ma), meta-granitoid-derived (ca. 449-113 Ma; n = 24; peak at 251 Ma) and gabbro-derived (436-242 Ma; n = 15; peaks at 264 and 244 Ma) grains. Each textural type is characterized by a distinct zircon oxygen isotope composition and is thus endowed with a genetic connotation. The Precambrian population (2605-741 Ma; n = 40) exhibits a prominent age peak at 2520 Ma (granulite-facies metamorphism) and four small peaks at ca. 1900, 1600, and 800 Ma. Our new data, together with literature zircon ages, significantly constrain models of three seismically-determined deep crustal layers beneath the fossil subduction zone-forearc along the active northern margin of the North China Craton, namely: (1) an upper arc crust of early to mid-Paleozoic age, intruded by a major Permian-Triassic composite granitoid-gabbroic pluton (8-20 km depth); (2) a middle crust, predominantly consisting of mid-Meso- to Neoproterozoic felsic and mafic gneisses; and (3) a lower crust composed predominantly of late Archean granulite-facies rocks. We conclude that the Paleozoic orogenic crust is limited to the upper crustal level, and the middle to lower crust has a North China Craton affinity. Furthermore, integrating our data with surface geological, petrological and geochronological constraints, we present a new conceptual model of orogenic uplift, lithospheric delamination and crustal underthrusting for this key ocean-continent convergent margin.

3D geodynamic models for the development of opposing continental subduction zones: The Hindu Kush-Pamir example

NASA Astrophysics Data System (ADS)

Liao, Jie; Gerya, Taras; Thielmann, Marcel; Webb, A. Alexander G.; Kufner, Sofia-Katerina; Yin, An

2017-12-01

The development of opposing continental subduction zones remains scantly explored in three dimensions. The Hindu Kush-Pamir orogenic system at the western end of the Himalayan orogen provides a rare example of continental collision linked to two opposing intra-continental subduction zones. The subducted plates feature a peculiar 3D geometry consisting of two distinct lithospheric fragments with different polarities, subduction angles and slab-curvatures beneath the Hindu Kush and Pamir, respectively. Using 3D geodynamic modeling, we simulate possible development of two opposing continental subduction zones to understand the dynamic evolution of the Hindu Kush-Pamir orogenic system. Our geodynamic model reproduces the major tectonic elements observed: (1) the deeper subduction depth, the steeper dip angle and the southward offset of the Hindu Kush subduction zone relative to the Pamir naturally occur if convergence direction of the subducting Indian plate and dip-direction of the Hindu Kush subduction zone match. (2) The formation of the highly asymmetrically curved Pamir region and the south-dipping subduction is promoted by the initial geometry of the indenting Indian lithosphere together with the existence of a major strike-slip fault on the eastern margin of the Pamir region. (3) Subduction of only the lower continental crust during continental collision can occur if the coupling between upper and lower crusts is weak enough to allow a separation of these two components, and that (4) the subduction of mainly lower crust then facilitates that conditions for intermediate-depth seismicity can be reached. (5) The secondary tectonic features modeled here such as strike-slip-fault growth, north-northwest striking extension zone, and lateral flow of the thickened ductile upper crust are comparable to the current tectonics of the region. (6) Model results are further compared to the potentially similar orogenic system, i.e., the Alpine orogen, in terms of the curved Western Alpine arc and the two opposing subducted slabs beneath the Alps and the Dinarides.

Kinematic constraints on buckling a lithospheric-scale orocline during Pangea assembly: a geologic synthesis

NASA Astrophysics Data System (ADS)

Weil, Arlo; Gutiérrez-Alonso, Gabriel; Johnston, Stephen; Pastor Galán, Daniel

2013-04-01

The Paleozoic Variscan orogeny was a large-scale collisional event involving amalgamation of multiple continents and micro-continents. Existing data, suggests oroclinal buckling of an originally near-linear convergent margin during the last stages of Variscan deformation in the late Paleozoic. Closure of the Rheic Ocean resulted in E-W shortening (present-day coordinates) in the Carboniferous, producing a near linear N-S trending, east-verging belt. Subsequent N-S shortening near the Carb-Permian boundary resulted in oroclinal buckling. This late-stage orogenic event remains an enigmatic part of final Pangea amalgamation. The present-day arc curvature of the Variscan has inspired many tectonic models, with little agreement between them. While there is general consensus that two separate phases of deformation occurred, various models consider that curvature was caused by: dextral transpression around a Gondwana indentor; strike-slip wrench tectonics; or a change in tectonic transport direction due to changing stress fields. More recent models explain the curvature as an orocline, with potentially two opposite-facing bends, caused by secondary rotations. Deciphering the kinematic history of curved orogens is difficult, and requires establishment of two deformation phases: an initial compressive phase that forms a relatively linear belt, and a second phase that causes vertical-axis rotation of the orogenic limbs. Historically the most robust technique to accurately quantify vertical axis-rotation in curved orogens is paleomagnetic analysis, but recently other types of data, including fracture, geochemical, petrologic, paleo-current and calcite twin data, have been used to corroborate secondary buckling. A review of existing and new Variscan data from Iberia is presented that argues for secondary buckling of an originally linear orogenic system. Together, these data constrain oroclinal buckling of the Cantabrian Orocline to have occurred in about 10 Ma during the latest Carboniferous, which agrees well with recent geodynamical models and structural data that relate oroclinal buckling with lithospheric delamination in the Variscan.

A hypothesis for Proterozoic-Phanerozoic supercontinent cyclicity, with implications for mantle convection, plate tectonics and Earth system evolution

NASA Astrophysics Data System (ADS)

Grenholm, Mikael; Scherstén, Anders

2015-11-01

We present a conceptual model for supercontinent cycles in the Proterozoic-Phanerozoic Eons. It is based on the repetitive behavior of C and Sr isotopes in marine carbonates and U-Pb ages and εHf of detrital zircons seen during the Neoproterozoic-Paleozoic and Paleoproterozoic Eras, respectively. These records are considered to reflect secular changes in global tectonics, and it is hypothesized that the repetitive pattern is caused by the same type of changes in global tectonics. The fundamental premise of this paper is that such repetitive changes should also be recorded in orogenic belts worldwide. This carries the implication that Neoproterozoic-Paleozoic orogenic belts should have Paleoproterozoic equivalents. It is proposed that this is the case for the East African, Uralides and Ouachita-Alleghanian orogens, which have Paleoproterozoic analogs in the West African-Amazon, Laurentian and East European cratons, respectively. The Neoproterozoic-Paleozoic orogenic belts are not isolated features but occur in a specific global context, which correspond to the relatively well-constrained Neoproterozoic break-up of Rodinia, and the subsequent Late Paleozoic assembly of Pangea. The existence of Paleoproterozoic equivalents to Neoproterozoic-Paleozoic orogens requires that the same cycle defined the Paleoproterozoic. We therefore hypothesize that there were Paleoproterozoic supercontinents equivalent to Rodinia and Pangea, and that Proterozoic-Phanerozoic supercontinents are comprised of two basic types of configurations, equivalent to Rodinia (R-type) and Pangea (P-type). The Paleoproterozoic equivalent of Rodinia is likely the first supercontinent to have formed, and Proterozoic-Phanerozoic supercontinent cycles are therefore defined by R- to R-type cycles, each lasting approximately 1.5 Gyr. We use this cyclic pattern as a framework to develop a conceptual model that predicts the configuration and cycles of Proterozoic-Phanerozoic supercontinents, and their relation to mantle convection and Earth system evolution.

Kinematic constraints on buckling a lithospheric-scale orocline along the northern margin of Gondwana: A geologic synthesis

NASA Astrophysics Data System (ADS)

Weil, A. Brandon; Gutiérrez-Alonso, G.; Johnston, S. T.; Pastor-Galán, D.

2013-01-01

The Paleozoic Variscan orogeny was a large-scale collisional event involving amalgamation of multiple continents and micro-continents. Existing data, suggests oroclinal buckling of an originally near-linear convergent margin during the last stages of Variscan deformation in the late Paleozoic. Closure of the Rheic Ocean resulted in E-W shortening (present-day coordinates) in the Carboniferous, producing a near linear N-S trending, east-verging belt. Subsequent N-S shortening near the Carb-Permian boundary resulted in oroclinal buckling. This late-stage orogenic event remains an enigmatic part of final Pangea amalgamation. The present-day arc curvature of the Variscan has inspired many tectonic models, with little agreement between them. While there is general consensus that two separate phases of deformation occurred, various models consider that curvature was caused by: dextral transpression around a Gondwana indentor; strike-slip wrench tectonics; or a change in tectonic transport direction due to changing stress fields. More recent models explain the curvature as an orocline, with potentially two opposite-facing bends, caused by secondary rotations. Deciphering the kinematic history of curved orogens is difficult, and requires establishment of two deformation phases: an initial compressive phase that forms a relatively linear belt, and a second phase that causes vertical-axis rotation of the orogenic limbs. Historically the most robust technique to accurately quantify vertical axis-rotation in curved orogens is paleomagnetic analysis, but recently other types of data, including fracture, geochemical, petrologic, paleo-current and calcite twin data, have been used to corroborate secondary buckling. A review of existing and new Variscan data from Iberia is presented that argues for secondary buckling of an originally linear orogenic system. Together, these data constrain oroclinal buckling of the Cantabrian Orocline to have occurred in about 10 Ma during the latest Carboniferous, which agrees well with recent geodynamical models and structural data that relate oroclinal buckling with lithospheric delamination in the Variscan.

The Pico do Itapeva Formation: A record of gravitational flow deposits in an Ediacaran intracontinental basin, southern Brasília Orogen, SE Brazil

NASA Astrophysics Data System (ADS)

Caputo Neto, V.; Ribeiro, A.; Nepomuceno, F. O.; Dussin, I. A.; Trouw, R. A. J.

2018-07-01

The Pico do Itapeva Formation is a key metasedimentary unit to the understanding of the extensional events that occurred between the late stage of the southern Brasília Orogen collision and the main collision in the central Ribeira Orogen. The formation crops out in a 20 km long NE-trending narrow belt in the Mantiqueira mountain range in eastern São Paulo State, Brazil. It is located in the interference zone of the southern Brasília and the central Ribeira orogens and records deformation and greenschist facies metamorphism (biotite zone) related to the Brasiliano orogeny. The Pico do Itapeva Formation rests unconformably on a metaigneous substratum of the Socorro-Guaxupé Nappe/Embu Terrane and, on the southern side, is truncated by a steep SE-dipping dextral reverse shear zone. It consists of a coarsening- and thickening-upward succession, with minimum thickness of 800 m, composed of lutite, arkose and conglomerate. These rocks constitute three distinct lithofacies associations: LAI- arkose, arkose-lutite composite beds, lutite and fine conglomerate beds; LAII- arkose, pebbly arkose and scarce lutite and; LAIII- conglomerate and pebbly arkose. Most of the beds are massive; graded beds, dish and convolute structures occur locally. Bed thickness varies from thin to very thick and amalgamated bodies constitute up to 30m thick strata. Three mappable units at scale 1:20,000 were recognized based on different proportions of the three lithofacies associations. The deposits are interpreted as the record of mass flows and associated processes in a fan delta setting developed in an intermontane rift basin. U-Pb LA-ICP-MS detrital zircon ages suggest the maximum depositional age at ca. 611 Ma and the basin evolution is interpreted in the range between 611 and 580 Ma during an inter-orogenic stage between the Brasília and Ribeira orogenies.

Large along-strike variations in the onset of Subandean exhumation: Implications for Central Andean orogenic growth

USGS Publications Warehouse

Lease, Richard O.; Ehlers, T.A.; Enkelmann, E.

2016-01-01

Plate tectonics drives mountain building in general, but the space-time pattern and style of deformation is influenced by how climate, geodynamics, and basement structure modify the orogenic wedge. Growth of the Subandean thrust belt, which lies at the boundary between the arid, high-elevation Central Andean Plateau and its humid, low-elevation eastern foreland, figures prominently into debates of orogenic wedge evolution. We integrate new apatite and zircon (U-Th)/He thermochronometer data with previously published apatite fission-track data from samples collected along four Subandean structural cross-sections in Bolivia between 15° and 20°S. We interpret cooling ages vs. structural depth to indicate the onset of Subandean exhumation and signify the forward propagation of deformation. We find that Subandean growth is diachronous south (11 ± 3 Ma) vs. north (6 ± 2 Ma) of the Bolivian orocline and that Subandean exhumation magnitudes vary by more than a factor of two. Similar north-south contrasts are present in foreland deposition, hinterland erosion, and paleoclimate; these observations both corroborate diachronous orogenic growth and illuminate potential propagation mechanisms. Of particular interest is an abrupt shift to cooler, more arid conditions in the Altiplano hinterland that is diachronous in southern Bolivia (16-13 Ma) vs. northern Bolivia (10-7 Ma) and precedes the timing of Subandean propagation in each region. Others have interpreted the paleoclimate shift to reflect either rapid surface uplift due to lithosphere removal or an abrupt change in climate dynamics once orographic threshold elevations were exceeded. These mechanisms are not mutually exclusive and both would drive forward propagation of the orogenic wedge by augmenting the hinterland backstop, either through surface uplift or spatially variable erosion. In summary, we suggest that diachronous Subandean exhumation was driven by piecemeal hinterland uplift, orography, and the outward propagation of deformation.

Seismic anisotropies of the Songshugou peridotites (Qinling orogen, central China) and their seismic implications

NASA Astrophysics Data System (ADS)

Cao, Yi; Jung, Haemyeong; Song, Shuguang

2018-01-01

Though extensively studied, the roles of olivine crystal preferred orientations (CPOs or fabrics) in affecting the seismic anisotropies in the Earth's upper mantle are rather complicated and still not fully known. In this study, we attempted to address this issue by analyzing the seismic anisotropies [e.g., P-wave anisotropy (AVp), S-wave polarization anisotropy (AVs), radial anisotropy (ξ), and Rayleigh wave anisotropy (G)] of the Songshugou peridotites (dunite dominated) in the Qinling orogen in central China, based on our previously reported olivine CPOs. The seismic anisotropy patterns of olivine aggregates in our studied samples are well consistent with the prediction for their olivine CPO types; and the magnitude of seismic anisotropies shows a striking positive correlation with equilibrium pressure and temperature (P-T) conditions. Significant reductions of seismic anisotropies (AVp, max. AVs, and G) are observed in porphyroclastic dunite compared to coarse- and fine-grained dunites, as the results of olivine CPO transition (from A-/D-type in coarse-grained dunite, through AG-type-like in porphyroclastic dunite, to B-type-like in fine-grained dunite) and strength variation (weakening: A-/D-type → AG-type-like; strengthening: AG-type-like → B-type-like) during dynamic recrystallization. The transition of olivine CPOs from A-/D-type to B-/AG-type-like in the forearc mantle may weaken the seismic anisotropies and deviate the fast velocity direction and the fast S-wave polarization direction from trench-perpendicular to trench-oblique direction with the cooling and aging of forearc mantle. Depending on the size and distribution of the peridotite body such as the Songshugou peridotites, B- and AG-type-like olivine CPOs can be an additional (despite minor) local contributor to the orogen-parallel fast velocity direction and fast shear-wave polarization direction in the orogenic crust such as in the Songshugou area in Qinling orogen.

Through the microcirculatory maze with machete, molecule, and minicomputer (1986 Alza lecture).

PubMed

Bassingthwaighte, J B

1987-01-01

This is a personal historical essay on meanderings through the jungle of the microcirculatory swamp. Because one pretends that the wandering was purposefully exploratory, a few guideposts are placed at positions where one could discern blaze-marks from earlier wanderers, and the path cut a little wider along some of the routes that may be enjoyed by investigators wanting to put their blazes along more distant paths. Naturally, one starts by coming up the broad rivers, then branching into the little streams. Each of us chooses to seek a different "mother lode," up a different stream.

Tectonic evolution of the Western Australian Shield

NASA Technical Reports Server (NTRS)

Myers, John S.

1988-01-01

Geological and geochronological studies in the Western Australian Shield were updated. This terrane bears many similarities to the Indian Shield since they were neighboring parts of Gondwanaland. Western Australia consists of two cratons (Pilbara and Yilgarn) and four orogenic belts (Capricorn, Pingarra, Albany-Fraser, and Patterson), as well as some relatively young (1.6 to 0.75 Ga) sedimentary rocks. The two cratonic blocks are both older than about 2.5 Ga, and the orogenic belts range in age from 2.0 to 0.65 Ga.

Anatexis of mafic and felsic lower crust: Geochemistry and Nd, Sr and Pb isotopes of late-orogenic granodiorites and leucogranites (Damara orogen, Namibia)

NASA Astrophysics Data System (ADS)

Osterhus, Lennart; Jung, Stefan

2010-05-01

The Damara orogen (Namibia) represents a well-exposed and deeply eroded orogenic mobile belt consisting of the north-south trending Kaoko belt and the northeast-southwest trending intracontinental Damara belt. The latter has been subdivided into a Northern, a Central and a Southern Zone based on stratigraphy, metamorphic grade, structure and geochronology. The late-orogenic granodioritic to leucogranitic Gawib pluton is a cross-cutting, pear-shaped post-tectonic stock within the southern Central Zone which is elsewhere dominated by basement rocks, high-grade metasedimentary rocks of the Tinkas Formation and syn-orogenic granites (Salem-type). The non-foliated granodiorites consist of plagioclase, quartz, microcline, hornblende and biotite whereas the leucogranites consist of microcline, quartz, plagioclase and biotite. Major element variation of the granodiorites show two distinct magma types were some samples have high TiO2, MgO and Fe2O3 and low Al2O3 and others have low TiO2, MgO and Fe2O3 and high Al2O3. Based on high REE, Nb, Zr and Y concentrations some granodiorites can be classified as A-type granitoids. Strontium concentrations are high in the granodiorites (up to 939 ppm) and decrease to < 200 ppm in the leucogranites. Rb/Sr ratios are low (1) in the leucogranites. Granodiorites have moderately radiogenic initial 87Sr/86Sr ratios (0.7088-0.7132), strongly negative initial ɛ Nd values (ca. -12) and comparatively unradiogenic Pb isotope data, the latter obtained on acid-leached feldspar separates. Leucogranites have more radiogenic initial 87Sr/86Sr ratios (0.7223-0.7336) and more negative initial ɛ Nd values (ca. -18). Pb isotopes tend to be less radiogenic than in the granodiorites. The mean crustal residence ages of the granodiorites, expressed as depleted mantle Nd model ages, are ca. 2.0 Ga but the leucogranites tend to have older Nd model ages (2.5 Ga). Therefore, a likely source for the granodiorites and leucogranites is a sequence of mafic to intermediate or felsic lower crust. In a plate-tectonic context, a correlation between lower crustal magmatism and changes in the direction of micro-plate movements between the central and the southern part of the Damara orogen can be suggested, provoking re-activation of lithospheric shear zones. If such reactivation caused a reversal in the sense of movement, the associated faults opened and propagated as tensional faults. This would have allowed fracturing through the continental crust causing pressure release, channeling of volatiles, partial melting and generation of magmas from the lower crust. This suggestion is confirmed by the intrusion of the pluton along a major crustal shear zone, the Okahandja Lineament. The intrusion was probably accompanied by a change in the stress field which renewed transcurrent movements along this lithospheric shear zone.

Contrasting zircon morphology and UPb systematics in peralkaline and metaluminous post-orogenic granite complexes of the Arabian Shield, Kingdom of Saudi Arabia

USGS Publications Warehouse

Aleinikof, J.N.; Stoeser, D.B.

1989-01-01

Uzircon ages are reported for seven metaluminous-to-peralkaline post-orogenic granites from the Late Proterozoic Arabian Shield of Saudi Arabia. Zircons from the metaluminous rocks are prismatic, with length-to-width ratios of ??? 2-4: 1 and small pyramidal terminations. In contrast, zircons from three of the four peralkaline complexes either lack well-developed prismatic faces (are pseudo-octahedral) or are anhedral. Some zircons from the peralkaline granites contain inherited radiogenic Pb and have very high common Pb contents (206Pb/204Pb < 150), making the UPb method poorly suited for determining the age of these rocks. Zircons in the metaluminous granites do not contain inheritance and yield well-defined concordia intercepts. The span of ages of the seven complexes (670-470 Ma) indicates that post-orogenic granitic magmatism was not a singular event in the Arabian Shield but rather occurred as multiple intrusive episodes from the Late Proterozoic to the Middle Ordovician. ?? 1989.

Geology of the Byrd Glacier Discontinuity (Ross Orogen): New survey data from the Britannia Range, Antarctica

USGS Publications Warehouse

Carosi, R.; Giacomini, F.; Talarico, F.; Stump, E.

2007-01-01

Field activities in the Britannia Range (Transantarctic Mountains, Antarctica) highlighted new geological features around the so-called Byrd Glacier discontinuity. Recent field surveys revealed the occurrence of significant amounts of medium- to high-grade metamorphic rocks, intruded by abundant coarse-grained porphyritic granitoids. Most of the granitoids are deformed, with foliation parallel to the regional foliation in the metamorphics. Two main episodes of deformation are observed. Tight to isoclinal folds and penetrative axial plane foliation are related to the D1 phase, open folds to the D2. The main foliation (D1) trends nearly E-W in agreement with the trend in the southern portion of the Byrd Glacier. In most outcrops, granitic dykes are folded and stretched by the D2 deformation, which shows similar characteristics with the D2 deformation south of the Byrd Glacier. This suggests the occurrence in the Ross orogen of an orogen-normal structure south and north of the Byrd Glacier.

Ediacaran 2,500-km-long synchronous deep continental subduction in the West Gondwana Orogen

NASA Astrophysics Data System (ADS)

Ganade de Araujo, Carlos E.; Rubatto, Daniela; Hermann, Joerg; Cordani, Umberto G.; Caby, Renaud; Basei, Miguel A. S.

2014-10-01

The deeply eroded West Gondwana Orogen is a major continental collision zone that exposes numerous occurrences of deeply subducted rocks, such as eclogites. The position of these eclogites marks the suture zone between colliding cratons, and the age of metamorphism constrains the transition from subduction-dominated tectonics to continental collision and mountain building. Here we investigate the metamorphic conditions and age of high-pressure and ultrahigh-pressure eclogites from Mali, Togo and NE-Brazil and demonstrate that continental subduction occurred within 20 million years over at least a 2,500-km-long section of the orogen during the Ediacaran. We consider this to be the earliest evidence of large-scale deep-continental subduction and consequent appearance of Himalayan-scale mountains in the geological record. The rise and subsequent erosion of such mountains in the Late Ediacaran is perfectly timed to deliver sediments and nutrients that are thought to have been necessary for the subsequent evolution of sustainable life on Earth.

Palæo- and Neoproterozoic granitoids and rhyolites from the West Congolian Belt (Gabon, Congo, Cabinda, north Angola): chemical composition and geotectonic implications

NASA Astrophysics Data System (ADS)

Vicat, J.-P.; Pouclet, A.

2000-11-01

Various Palæo- and Neoproterozoic granitoid bodies and related rhyolites are located in the West Congolian Belt. The Palæoproterozoic granitoids, dated around 2 Ga, exhibit an Archæan-type tonalite-trondhjemite-granodiorite suite chemical signature and are related to the Eburnean tectnno-magmatic event. In contrast, Neoproterozoic granitoids and rhyolites, dated around 1 Ga, have chemical geotectonic signatures that range from orogenic to intraplate (Nb-negative anomaly, large ion lithophile element enrichment and high field strength element depletion). However, a late Kibaran orogenic event (1.35-1.00 Ga) is unknown in this area. The Neoproterozoic magmatism is interpreted as a consequence of the initiation of pre-Pan-African rifting, which implies the formation or the reactivation of major crustal strike-slip faults with asthenospheric upwelling and the generation of a thermal anomaly. This thermal anomaly could have been responsible for magmatic processes involving the lower crust, as encountered in post-orogenic environments.

Seismic evidence for multiple-stage exhumation of high/ultrahigh pressure metamorphic rocks in the eastern Dabie orogenic belt

NASA Astrophysics Data System (ADS)

Luo, Yinhe; Zhao, Kaifeng; Tang, Chi-Chia; Xu, Yixian

2018-05-01

The Dabie-Sulu orogenic belt in China contains one of the largest exposures of high and ultrahigh pressure (HP and UHP) metamorphic rocks in the world. The origin of HP/UHP metamorphic rocks and their exhumation to the surface in this belt have attracted great interest in the geologic community because the study of exhumation history of HP/UHP rocks helps to understand the process of continental-continental collision and the tectonic evolution of post-collision. However, the exhumation mechanism of the HP-UHP rocks to the surface is still contentious. In this study, by deploying 28 broadband seismic stations in the eastern Dabie orogenic belt and combining seismic data from 40 stations of the China National Seismic Network (CNSN), we image the high-resolution crustal isotropic shear velocity and radial anisotropy structure using ambient noise tomography. Our high-resolution 3D models provide new information about the exhumation mechanism of HP/UHP rocks and the origin of two dome structures.

Geology and depositional environments of the Guadalupian rocks of the northern Del Norte Mountains, West Texas

USGS Publications Warehouse

Rudine, S.F.; Wardlaw, B.R.; Rohr, D.M.; Grant, R.E.

2000-01-01

The Guadalupian rocks of the northern Del Norte Mountains were deposited in a foreland basin between land of the Marathon orogen and a carbonate shoal established on the geanticline separating the foreland basin from the Delaware basin. Deposition was alternately influenced by coarse clastic input from the orogen and carbonate shoal, which interrupted shallow basinal siltstone depletion. Relatively deeper-water deposition is characterized by carbonate input from the shoal, and relatively shallow-water deposition is characterized by sandstone input from the orogen. Deposition was in five general transgressive-regressive packages that include (1) the Road Canyon Formation and the first siltstone member and first sandstone member of the Word Formation, (2) the second siltstone member, Appel Ranch Member, and limy sandy siltstone member of the Word Formation, (3) the Vidrio Formation, (4) the lower and part of the middle members of the Altuda Formation, and (5) part of the middle and upper members of the Altuda Formation.

Microscale Patterning of Thermoplastic Polymer Surfaces by Selective Solvent Swelling

PubMed Central

Rahmanian, Omid; Chen, Chien-Fu; DeVoe, Don L.

2012-01-01

A new method for the fabrication of microscale features in thermoplastic substrates is presented. Unlike traditional thermoplastic microfabrication techniques, in which bulk polymer is displaced from the substrate by machining or embossing, a unique process termed orogenic microfabrication has been developed in which selected regions of a thermoplastic surface are raised from the substrate by an irreversible solvent swelling mechanism. The orogenic technique allows thermoplastic surfaces to be patterned using a variety of masking methods, resulting in three-dimensional features that would be difficult to achieve through traditional microfabrication methods. Using cyclic olefin copolymer as a model thermoplastic material, several variations of this process are described to realize growth heights ranging from several nanometers to tens of microns, with patterning techniques include direct photoresist masking, patterned UV/ozone surface passivation, elastomeric stamping, and noncontact spotting. Orogenic microfabrication is also demonstrated by direct inkjet printing as a facile photolithography-free masking method for rapid desktop thermoplastic microfabrication. PMID:22900539

The Neoacadian orogenic core of the souther Appalachians: a Geo-traverse through the migmatitic inner Piedmont from the Brushy Mountains to Lincolnton, North Carolina

USGS Publications Warehouse

Merschat, Arthur J.; Hatcher, Robert D.; Byars, Heather E.; Gilliam, William G.; Eppes, Martha Cary; Bartholomew, Mervin J.

2012-01-01

The Inner Piedmont extends from North Carolina to Alabama and comprises the Neoacadian (360–345 Ma) orogenic core of the southern Appalachian orogen. Bordered to west by the Blue Ridge and the exotic Carolina superterrane to the east, the Inner Piedmont is cored by an extensive region of migmatitic, sillimanite-grade rocks. It is a composite of the peri-Laurentian Tugaloo terrane and mixed Laurentian and peri-Gondwanan affinity Cat Square terrane, which are exposed in several gentle-dipping thrust sheets (nappes). The Cat Square terrane consists of Late Silurian to Early Devonian pelitic schist and metagraywacke intruded by several Devonian to Mississippian peraluminous granitoids, and juxtaposed against the Tugaloo terrane by the Brindle Creek fault. This field trip through the North Carolina Inner Piedmont will examine the lithostratigraphies of the Tugaloo and Cat Square terranes, deformation associated with Brindle Creek fault, Devonian-Mississippian granitoids and charnockite of the Cat Square terrane, pervasive amphibolite-grade Devonian-Mississippian (Neoacadian) deformation and metamorphism throughout the Inner Piedmont, and existence of large crystalline thrust sheets in the Inner Piedmont. Consistent with field observations, geochronology and other data, we have hypothesized that the Carolina superterrane collided obliquely with Laurentia near the Pennsylvania embayment during the Devonian, overrode the Cat Square terrane and Laurentian margin, and squeezed the Inner Piedmont out to the west and southwest as an orogenic channel buttressed against the footwall of the Brevard fault zone.

Timing of sediment-hosted Cu-Ag mineralization in the Trans-Hudson orogen at Janice Lake, Wollaston Domain, Saskatchewan, Canada

NASA Astrophysics Data System (ADS)

Perelló, José; Valencia, Víctor A.; Cornejo, Paula; Clifford, John; Wilson, Alan J.; Collins, Greg

2018-04-01

The Janice Lake Cu-Ag mineralization in the Wollaston Domain of northern Saskatchewan is hosted by a metasedimentary sequence in the upper part of the Wollaston Supergroup of the Trans-Hudson orogen. The Wollaston Supergroup was deposited between 2070 and 1865 Ma in a foreland basin setting constructed over Archean basement of the Hearne craton. The Trans-Hudson orogen underwent final collision and peak metamorphism at 1810 Ma, during consolidation of Laurentia and its amalgamation with the Columbia supercontinent. Titanite is a common constituent of the post-peak metamorphic assemblages of Trans-Hudson lithotectonic units and accompanied disseminated sediment-hosted Cu sulfide mineralization at Janice Lake. Titanite crystals, intergrown with chalcocite over a strike-length of 2 km of Cu-bearing stratigraphy, were dated by the ID-TIMS and LA-ICP-MS U-Pb methods, returning an age range from 1780 to 1760 Ma and a weighted average age of 1775 ± 10 Ma. The titanite ages effectively date the associated chalcocite-dominated sediment-hosted Cu-Ag mineralization and its formation during initial post-orogenic uplift and cooling, 30 myr after peak metamorphism. The age-range and tectonic setting of the Janice Lake mineralization confirms that sediment-hosted Cu mineralization was an integral part of the metallogenic endowment of Columbia and that its emplacement coincided with the continental-scale Trans-Hudson orogeny rather than with diagenesis and extensional basin development 100 myr earlier.

Orogen-transverse tectonic window in the Eastern Himalayan fold belt: A superposed buckling model

NASA Astrophysics Data System (ADS)

Bose, Santanu; Mandal, Nibir; Acharyya, S. K.; Ghosh, Subhajit; Saha, Puspendu

2014-09-01

The Eastern Lesser Himalayan fold-thrust belt is punctuated by a row of orogen-transverse domal tectonic windows. To evaluate their origin, a variety of thrust-stack models have been proposed, assuming that the crustal shortening occurred dominantly by brittle deformations. However, the Rangit Window (RW) in the Darjeeling-Sikkim Himalaya (DSH) shows unequivocal structural imprints of ductile deformations of multiple episodes. Based on new structural maps, coupled with outcrop-scale field observations, we recognize at least four major episodes of folding in the litho-tectonic units of DSH. The last episode has produced regionally orogen-transverse upright folds (F4), the interference of which with the third-generation (F3) orogen-parallel folds has shaped the large-scale structural patterns in DSH. We propose a new genetic model for the RW, invoking the mechanics of superposed buckling in the mechanically stratified litho-tectonic systems. We substantiate this superposed buckling model with results obtained from analogue experiments. The model explains contrasting F3-F4 interferences in the Lesser Himalayan Sequence (LHS). The lower-order (terrain-scale) folds have undergone superposed buckling in Mode 1, producing large-scale domes and basins, whereas the RW occurs as a relatively higher-order dome nested in the first-order Tista Dome. The Gondwana and the Proterozoic rocks within the RW underwent superposed buckling in Modes 3 and 4, leading to Type 2 fold interferences, as evident from their structural patterns.

Detrital fingerprints of fossil continental-subduction zones (Axial Belt Provenance, European Alps)

NASA Astrophysics Data System (ADS)

Resentini, Alberto; Garzanti, Eduardo; Vezzoli, Giovanni; Andò, Sergio; Malusà, Marco G.; Padoan, Marta; Paparella, Paolo

2010-05-01

Alpine-type collision orogens are generated by attempted subduction of thinned continental margins. Because of complex tectonic structure, orogenic detritus is characterized by a range of detrital signatures, making its recognition an arduous task (Dickinson and Suczek, 1979). Among the various orogenic sub-provenances, Axial Belt Provenance, derived from the erosion of the neometamorphic axial pile, can be regarded as the most typifying signature of collision orogens (Garzanti et al., 2007). In the Austroalpine Cretaceous and Penninic Eocene axial belts of the Alps, we ideally distinguish three structural levels, each characterized by diagnostic detrital fingerprints. The shallow level chiefly consists of offscraped remnant-ocean turbidites and unmetamorphosed continental-margin sediments, and mostly produces lithic to lithoquartzose sedimentaclastic sands yielding very-poor heavy-mineral suites including ultrastable minerals. The intermediate level includes low-grade metasediments and polymetamorphic basements, and sheds lithoquartzose to quartzolithofeldspathic metamorphiclastic sands yielding moderately-rich epidote- amphibole suites with chloritoid or garnet. The deep level contains eclogitic remnants of continent- ocean transitions, and supplies quartzofeldspathic to quartzolithic high-rank metamorphiclastic to lithic ultramaficlastic sands yielding rich to extremely-rich suites dominated by garnet, hornblende, or epidote depending on protoliths (continental vs. oceanic) and pressure/temperature paths followed during exhumation. Although widely overprinted under greenschist-facies or amphibolite-facies conditions, occurrence of ultradense eclogite in source areas is readily revealed by the Heavy Mineral Concentration (HMC) index, which mirrors the average density of source rocks in the absence of hydraulic-sorting effects (Garzanti and Andò 2007). The Metamorphic Index (MI, Garzanti and Vezzoli, 2003) and Hornblende Colour Index (HCI) reflect peak temperatures reached at later stages, when subduction is throttled by arrival of thicker continental crust and geothermal gradients increase. Experience gained from modern sediments provides fundamental help to decrypt the innumerable pieces of information stored in the sedimentary record, and thus to identify and reconstruct subduction events of the past. Dickinson, W., R., Suczek, C.A., 1979.Plate tectonics and sandstone compositions. AAPG Bull. 63, 2164-2182. Garzanti, E. and Andò, S. 2007. Heavy-mineral concentration in modern sands: implications for provenance interpretation. In Mange, M., and Wright, D., eds. Heavy Minerals in Use. Developments in Sedimentology Series 58. Amsterdam, Elsevier, p. 517-545. Garzanti, E., and Vezzoli, G. 2003. A classification of metamorphic grains in sands based on their composition and grade. J. Sediment. Res. 73:830-837. Garzanti, E., Doglioni, C., Vezzoli, G., Andò, S., 2007. Orogenic belts and orogenic sediment provenante. J. Geology, 115:315-334.

Window into the Caledonian orogen: Structure of the crust beneath the East Shetland platform, United Kingdom

USGS Publications Warehouse

McBride, J.H.; England, R.W.

1999-01-01

Reprocessing and interpretation of commercial and deep seismic reflection data across the East Shetland platform and its North Sea margin provide a new view of crustal subbasement structure beneath a poorly known region of the British Caledonian orogen. The East Shetland platform, east of the Great Glen strike-slip fault system, is one of the few areas of the offshore British Caledonides that remained relatively insulated from the Mesozoic and later rifting that involved much of the area around the British Isles, thus providing an "acoustic window" into the deep structure of the orogen. Interpretation of the reflection data suggests that the crust beneath the platform retains a significant amount of its original Caledonian and older architecture. The upper to middle crust is typically poorly reflective except for individual prominent dipping reflectors with complex orientations that decrease in dip with depth and merge with a lower crustal layer of high reflectivity. The three-dimensional structural orientation of the reflectors beneath the East Shetland platform is at variance with Caledonian reflector trends observed elsewhere in the Caledonian orogen (e.g., north of the Scottish mainland), emphasizing the unique tectonic character of this part of the orogen. Upper to middle crustal reflectors are interpreted as Caledonian or older thrust surfaces that were possibly reactivated by Devonian extension associated with post-Caledonian orogenic collapse. The appearance of two levels of uneven and diffractive (i.e., corrugated) reflectivity in the lower crust, best developed on east-west-oriented profiles, is characteristic of the East Shetland platform. However, a north-south-oriented profile reveals an interpreted south-vergent folded and imbricated thrust structure in the lower crust that appears to be tied to the two levels of corrugated reflectivity on the east-west profiles. A thrust-belt origin for lower crustal reflectivity would explain its corrugated appearance. Regional seismic velocity models derived from refraction data suggest that this reflectivity correlates with a continuous lower crustal layer that has an intermediate seismic velocity. The lower crustal reflectivity is determined to be older than Mesozoic age by the bending down and truncation of the two reflectivity levels at the western margin of the North Sea Viking graben by a major mantle reflector inferred to be associated with Mesozoic rifting. The results of this study are thus in contrast with orthodox interpretations of the reflective layered lower crust as being caused by mantle-derived igneous intrusion or by deformation fabrics associated with stretching in response to continental rifting.

Deformation during terrane accretion in the Saint Elias orogen, Alaska

USGS Publications Warehouse

Bruhn, R.L.; Pavlis, T.L.; Plafker, G.; Serpa, L.

2004-01-01

The Saint Elias orogen of southern Alaska and adjacent Canada is a complex belt of mountains formed by collision and accretion of the Yakutat terrane into the transition zone from transform faulting to subduction in the northeast Pacific. The orogen is an active analog for tectonic processes that formed much of the North American Cordillera, and is also an important site to study (1) the relationships between climate and tectonics, and (2) structures that generate large- to great-magnitude earthquakes. The Yakutat terrane is a fragment of the North American plate margin that is partly subducted beneath and partly accreted to the continental margin of southern Alaska. Interaction between the Yakutat terrane and the North American and Pacific plates causes significant differences in the style of deformation within the terrane. Deformation in the eastern part of the terrane is caused by strike-slip faulting along the Fairweather transform fault and by reverse faulting beneath the coastal mountains, but there is little deformation immediately offshore. The central part of the orogen is marked by thrusting of the Yakutat terrane beneath the North American plate along the Chugach-Saint Elias fault and development of a wide, thin-skinned fold-and-thrust belt. Strike-slip faulting in this segment may he localized in the hanging wall of the Chugach-Saint Elias fault, or dissipated by thrust faulting beneath a north-northeast-trending belt of active deformation that cuts obliquely across the eastern end of the fold-and-thrust belt. Superimposed folds with complex shapes and plunging hinge lines accommodate horizontal shortening and extension in the western part of the orogen, where the sedimentary cover of the Yakutat terrane is accreted into the upper plate of the Aleutian subduction zone. These three structural segments are separated by transverse tectonic boundaries that cut across the Yakutat terrane and also coincide with the courses of piedmont glaciers that flow from the topographic backbone of the Saint Elias Mountains onto the coastal plain. The Malaspina fault-Pamplona structural zone separates the eastern and central parts of the orogen and is marked by reverse faulting and folding. Onshore, most of this boundary is buried beneath the western or "Agassiz" lobe of the Malaspina piedmont glacier. The boundary between the central fold-and-thrust belt and western zone of superimposed folding lies beneath the middle and lower course of the Bering piedmont glacier. ?? 2004 Geological Society of America.

Digital mine claim density map for Federal lands in Montana, 1996

USGS Publications Warehouse

Campbell, Harry W.; Hyndman, Paul C.

1998-01-01

This report describes a digital map and data files generated by the U.S. Geological Survey (USGS) to provide digital spatial mining claim information for Federal lands in Montana as of March, 1997. Statewide, 159,704 claims had been recorded with the Bureau of Land Management since 1975. Of those claims, 21,055 (13%) are still actively held while 138,649 (87%) are closed and are no longer held. Montana contains 147,704 sections (usually 1 section equals 1 square mile) in the Public Land Survey System, with 8,569 sections (6%) containing claim data. Of the sections with claim data, 2,192 (26%) contain actively held claims. Only 1.5% of Montana’s sections contains actively held mining claims. The four types of mining claim are lode, placer, mill, and tunnel. A mill claim may be as much as 5 acres or 1/128th (0.78125%) of a square mile. A lode claim, about 20 acres, would cover 1/32nd (3.125%) of a square mile. Mining claim data is earth science information deemed to be relevant to the assessment of historic, current, and future ecological, economic, and social systems. The digital map and data files that are available in this report are suitable for geographic information system (GIS)-based regional assessments at a scale of 1:100,000 or smaller. Campbell (1996) summarized the methodology and GIS techniques that were used to produce the mining claim density map of the Pacific Northwest. Campbell and Hyndman (1997) displayed mining claim information for the Pacific Northwest that used data acquired in 1994. Appendix A of this report lists the attribute data for the digital data files. Appendix B contains the GIS metadata.

Petrogenesis of granitoids and associated xenoliths in the early Paleozoic Baoxu and Enping plutons, South China: Implications for the evolution of the Wuyi-Yunkai intracontinental orogen

NASA Astrophysics Data System (ADS)

Yu, Yang; Huang, Xiao-Long; Sun, Min; He, Peng-Li

2018-05-01

The early Paleozoic Wuyi-Yunkai orogen was associated with extensive felsic magmatic activities and the orogenic core was mainly distributed in the Yunkai and Wugong domains located in the western Cathaysia block and in the Wuyi domain located in the central part of the Cathaysia block. In order to investigate the evolution of the Wuyi-Yunkai orogen, elemental and Sr-Nd isotopic analyses were performed for granites from the Baoxu pluton in the Yunkai domain and from the Enping pluton in the central part of the Cathaysia block. The Baoxu pluton consists of biotite granite with abundant xenoliths of gneissic granite, granodiorite and diorite, and the Enping pluton is mainly composed of massive granodiorite. Biotite granites (441 ± 5 Ma) and gneissic granite xenolith (443 ± 4 Ma) of the Baoxu pluton are all weakly peraluminous (A/CNK = 1.05-1.10). They show high Sr/Y and La/Yb ratios and have negative bulk-rock εNd(t) values (-7.0 to -4.4), which are similar to coeval gneissic S-type granites in the Yunkai domain and were probably derived from dehydration melting of a sedimentary source with garnet residue in the source. Granodiorites (429 ± 3 Ma) from Enping and granodiorite xenolith (442 ± 4 Ma) from Baoxu are metaluminous and have REE patterns with enriched light REE and flat middle to heavy REE, possibly generated by the dehydration melting of an igneous basement at middle to lower crustal level. Diorite xenolith from Baoxu is ultrapotassic (K2O = 4.9 wt%), has high contents of MgO (7.0 wt%), Cr (379 ppm) and Ni (171 ppm) and shows pronounced negative Nb, Ta and Ti anomalies. This xenolith also has negative εNd(t) value (-3.6) and low Rb/Ba and high Ba/Sr ratios, and is thus interpreted to be derived from an enriched lithospheric mantle with the breakdown of phlogopite. Early Paleozoic I- and S-type granites in the Wuyi-Yunkai orogen mostly have negative εNd(t) values and do not have juvenile components, consistent with genesis by an intracontinental orogenic event. These early Paleozoic granites occur near the ancient suture zone between the Yangtze and Cathaysia blocks and have high La/Yb and Sr/Y ratios, likely due to the existence of residual garnet in the source, suggesting the thickened crust at ca. 440 Ma. The 450-440 Ma gneissic S-type granites near the suture zone are earlier than those in the central part of the Cathaysia block (∼430 Ma). The crustal thickening along the ancient suture zone at 440 Ma propagated into the central part of the Cathaysia block as evidenced by the 430 Ma granites. Early Paleozoic I-type granites near the suture zone clearly show involvement of significant mantle-derived materials, in contrast to granites in the central part of the Cathaysia block. The ancient suture zone may have acted as channels for the emplacement of mafic magmas during the collapse of an intracontinental orogen.

Common Pb isotope mapping of UHP metamorphic zones in Dabie orogen, Central China: Implication for Pb isotopic structure of subducted continental crust

NASA Astrophysics Data System (ADS)

Shen, Ji; Wang, Ying; Li, Shu-Guang

2014-10-01

We report Pb isotopic compositions for feldspars separated from 57 orthogneisses and 2 paragneisses from three exhumed UHPM slices representing the North Dabie zone, the Central Dabie zone and the South Dabie zone of the Dabie orogen, central-east China. The feldspars from the gneisses were recrystallized during Triassic continental subduction and UHP metamorphism. Precursors of the orthogneisses are products of Neoproterozoic bimodal magmatic events, those in north Dabie zone emplaced into the lower crust and those in central and south Dabie zones into middle or upper crust, respectively. On a 207Pb/204Pb vs. 206Pb/204Pb diagram, almost all orthogneisses data lie to the left of the 0.23 Ga paleogeochron and plot along the model mantle evolution curve with the major portion of the data plotting below it. On a 208Pb/204Pb vs. 206Pb/204Pb diagram the most of data of north Dabie zone extend in elongate arrays along the lower crustal curve and others extend between the lower crustal curve to near the mantle evolution curve for the plumbotectonics model. This pattern demonstrates that the Pb isotopic evolution of the feldspars essentially ended at 0.23 Ga and the orthogneiss protoliths were principally dominated by reworking of ancient lower crust with some addition of juvenile mantle in the Neoproterozoic rifting tectonic zone. According to geological evolution history of the locally Dabie orogen, a four-stage Pb isotope evolution model including a long time evolution between 2.0 and 0.8 Ga with a lower crust type U/Pb ratio (μ = 5-6) suggests that magmatic emplacement levels of the protoliths of the orthogneisses in the Dabie orogen at 0.8 Ga also play an important role in the Pb evolution of the exhumed UHPM slices, corresponding to their respective Pb characters at ca. 0.8-0.23 Ga. For example, north Dabie zone requires low μ values (3.4-9.6), while central and south Dabie zones require high μ values (10.9-17.2). On the other hand, Pb isotopic mixing between north and central or south Dabie zones during retro-grade metamorphism enhanced by the extensive magmatism in the Cretaceous has also been observed in the 207Pb/204Pb vs. 206Pb/204Pb and 208Pb/204Pb vs. 206Pb/204Pb diagrams. A combined study of common Pb isotopic compositions of Dabie orthogneisses and Sulu UHPM rocks from the Chinese Continental Scientific Drilling project demonstrates that a slab marked by extremely unradiogenic Pb observed in the main hole was absent in the Dabie orogen. However, occurrence of some Mesozoic granitoids with such unradiogenic character in the Dabie orogen suggests that their source may be a buried unradiogenic unit underlying below north Dabie zone. This case study clearly shows that whether the position of the Dabie data relative to the orogen curve of the plumbotectonic model is helpful in understanding the Pb isotopic structure and evolution of subducted continental crust.

Flat-topped mountain ranges: Their global distribution and value for understanding the evolution of mountain topography

NASA Astrophysics Data System (ADS)

Calvet, Marc; Gunnell, Yanni; Farines, Bernard

2015-07-01

Extensive tracts of low-gradient topography in steep mountain ranges, either forming rangetop plateaus or terraced pediments on range flanks, are widely distributed in mountain belts around the world. Before the advent of plate tectonics, such populations of planar landforms were interpreted as vestiges of a post-orogenic raised peneplain, i.e., a low-gradient land surface resulting from the decay, during long intervals of base-level stability, of a previous mountain range that was subsequently raised once again to great elevations-thus forming a new mountain range. This two-stage model has been challenged by theories that advocate continuity in tectonic processes and more gradual changes in base level, and thus expect a more immediate and proportionate response of geomorphic systems. Here we present a global survey of erosion surfaces in mountain ranges and put existing theories and empirical evidence into a broad perspective calling for further research into the rates and regimes of long-term mountain evolution. The resulting library of case studies provides opportunities for comparative analysis and helps to classify the landform mosaics that are likely to arise from the interplay between (i) crustal regimes, which at convergent plate margins need be neither uniform nor steady at all times; (ii) radiation-driven and gravity-driven geomorphic regimes, which are mainly determined by crustal boundary conditions and climate; and (iii) paleogeography, through which clues about base-level changes can be obtained. We examine intracratonic and plate-margin settings, with examples from thin-skinned fold belts, thick-skinned fold belts, island-arc and other subduction-related settings, and bivergent collisional orogens. Results reveal that the existence of erosion surfaces is not a simple function of geodynamic setting. Although some erosion surfaces are pre-orogenic, evidence about their predominantly post-orogenic age is supported by apatite fission-track and helium rock-cooling signatures, stratigraphic age-bracketing, stream channel gradient patterns, and other direct or indirect dating criteria. It follows that many portions of mountain belts undergo unsteady, nonuniform post-orogenic landscape evolution trajectories, with intermittent opportunities for relief reduction. The resulting erosion surfaces remain preserved as signatures of transient landscape evolution regimes. We find that (i) occurrences of planar topography form populations of discrete, insular landscape units, only some of which could be interpreted as fragments of a fluvially dissected, and/or tectonically fragmented, regional peneplain. (ii) The post-orogenic time required for achieving advanced stages of relief reduction is variable, ranging from 3 to 70 Ma. (iii) Partly depending on whether the adjacent sedimentary basins were over- or underfilled, some erosion surfaces may have been controlled by raised base levels and may thus have formed at high elevations; however, in many cases they were disconnected from marine base levels by rapid surface uplift, thus acquiring their elevated positions in recent time. In some cases, subcrustal processes such as asthenospheric anomalies, and/or lithospheric slab tear or breakoff, explain extremely rapid, regional post-orogenic uplift. (iv) Overall, the conditions for achieving surface preservation in steep and tectonically active terrain are predictable but also quite varied and contingent on context.

Seismological Constraints on Lithospheric Evolution in the Appalachian Orogen

NASA Astrophysics Data System (ADS)

Fischer, K. M.; Hopper, E.; Hawman, R. B.; Wagner, L. S.

2017-12-01

Crust and mantle structures beneath the Appalachian orogen, recently resolved by seismic data from the EarthScope SESAME Flexible Array and Transportable Array, provide new constraints on the scale and style of the Appalachian collision and subsequent lithospheric evolution. In the southern Appalachians, imaging with Sp and Ps phases reveals the final (Alleghanian) suture between the crusts of Laurentia and the Gondwanan Suwannee terrane as a low angle (<15°) southward-dipping interface that soles into a flat-lying mid-crustal detachment. The suture location near the top of the crust coincides closely with the northern limit of the Suwannee terrane reconstructed from its lower Paleozoic shelf strata (Boote and Knapp, 2016). The observed suture geometry implies over 300 km of head-on shortening across a plate boundary structure similar in scale to the Himalayan mid-crustal detachment. While the suture and other structures from the Alleghanian collision are preserved in the upper and mid-crust, the lower crust and mantle lithosphere beneath this region have been significantly modified by later processes. Ps receiver functions, wavefield migration and SsPmp modeling reveal that crustal thickness reaches a maximum of 58 km (beneath high elevations in the Blue Ridge terrane) and decreases to 29-35 km (beneath lower elevations in the Carolina and Suwannee terranes). Given metamorphic estimates of unroofing (Duff and Kellogg, 2017) isostatic arguments indicate crustal thicknesses were 15-25 km larger at the end of the orogeny, indicating a thick crustal root across the region. The present-day residual crustal root beneath the Blue Ridge mountains is estimated to have a density contrast with the mantle of only 104±20 kg/m3. This value is comparable to other old orogens but lower than values typical of young or active orogens, indicating a loss of lower crustal buoyancy over time. At mantle depths, the negative shear velocity gradient that marks the transition from lithosphere to asthenosphere, as illuminated by Sp phases, varies across the Appalachian orogen. This boundary is shallow beneath the northeastern U.S. and in the zone of Eocene volcanism in Virginia, where low velocity anomalies occur in the upper mantle. These correlations suggest recent active lithosphere-asthenosphere interaction.

Geochemistry, 40Ar/39Ar geochronology, and geodynamic implications of Early Cretaceous basalts from the western Qinling orogenic belt, China

NASA Astrophysics Data System (ADS)

Zhang, Feifei; Wang, Yuejun; Cawood, Peter A.; Dong, Yunpeng

2018-01-01

The Qinling-Dabie orogenic belt was formed by the collision of the North and South China Cratons during the Early Mesozoic and subsequently developed into an intracontinental tectonic process during late Mesozoic. Field investigations identified the presence of late Mesozoic basalts in the Duofutun and Hongqiang areas in the western Qinling orogenic belt. The petrogenesis of these basalts provides an important constraint on the late Mesozoic geodynamics of the orogen. The representative basaltic samples yield the 40Ar/39Ar plateau age of about 112 Ma. These samples belong to the alkaline series and have SiO2 ranging from 44.98 wt.% to 48.19 wt.%, Na2O + K2O from 3.44 wt% to 5.44 wt%, and MgO from 7.25 wt.% to 12.19 wt.%. They demonstrate the right-sloping chondrite-normalized REE patterns with negligible Eu anomalies (1.00-1.10) and PM-normalized patterns enriched in light rare earth element, large ion lithophile element and high field strength element, similar to those of OIB rocks. These samples additionally show an OIB-like Sr-Nd isotopic signature with εNd(t) values ranging from +6.13 to +10.15 and initial 87Sr/86Sr ratios from 0.7028 to 0.7039, respectively. These samples are geochemically subdivided into two groups. Group 1 is characterized by low Al2O3 and high TiO2 and P2O5 contents, as well as high La/Yb ratios (>20), being the product of the high-pressure garnet fractionation from the OIB-derived magma. Group 2 shows higher Al2O3 but lower P2O5 contents and La/Yb ratios (<20) than Group 1, originating from asthenospheric mantle with input of delaminated lithospheric component. In combination with available data, it is proposed for the petrogenetic model of the Early Cretaceous thickened lithospheric delamination in response to the asthenospheric upwelling along the western Qinling orogenic belt.

Crustal strength anisotropy influences landscape form and longevity

NASA Astrophysics Data System (ADS)

Roy, S. G.; Koons, P. O.; Upton, P.; Tucker, G. E.

2013-12-01

Lithospheric deformation is increasingly recognized as integral to landscape evolution. Here we employ a coupled orogenic and landscape model to test the hypothesis that strain-induced crustal failure exerts the dominant control on rates and patterns of orogenic landscape evolution. We assume that erodibility is inversely proportional to cohesion for bedrock rivers host to bedload abrasion. Crustal failure can potentially reduce cohesion by several orders of magnitude along meter scale planar fault zones. The strain-induced cohesion field is generated by use of a strain softening upper crustal rheology in our orogenic model. Based on the results of our coupled model, we predict that topographic anisotropy found in natural orogens is largely a consequence of strain-induced anisotropy in the near surface strength field. The lifespan and geometry of mountain ranges are strongly sensitive to 1) the acute division in erodibility values between the damaged fault zones and the surrounding intact rock and 2) the fault zone orientations for a given tectonic regime. The large division in erodibility between damaged and intact rock combined with the dependence on fault zone orientation provides a spectrum of rates at which a landscape will respond to tectonic or climatic perturbations. Knickpoint migration is about an order of magnitude faster along the exposed cores of fault zones when compared to rates in intact rock, and migration rate increases with fault dip. The contrast in relative erosion rate confines much of the early stage fluvial erosion and establishes a major drainage network that reflects the orientations of exposed fault zones. Slower erosion into the surrounding intact rock typically creates small tributaries that link orthogonally to the structurally confined channels. The large divide in fluvial erosion rate permits the long term persistence of the tectonic signal in the landscape and partly contributes to orogen longevity. Landscape morphology and channel tortuosity together provide critical information on the orientation and spatial distribution of fault damage and the relevant tectonic regime. Our landscape evolution models express similar mechanisms and produce drainage network patterns analogous to those seen in the Southern Alps of New Zealand and the Himalayan Eastern Syntaxis, both centers of active lithospheric deformation.

Kyanite-bearing migmatites in the central Adirondack Mountains: Implications for late to post-orogenic metamorphism and melting in a collisional orogen

NASA Astrophysics Data System (ADS)

Reeder, J.; Metzger, E. P.; Bickford, M. E.; Leech, M. L.

2016-12-01

Sillimanite-rich felsic migmatites exposed at Ledge Mountain in the Central Adirondack Highlands (AH) represent the only location in the AH where kyanite is found. The texturally young kyanite is overprinted on sillimanite in largely undeformed pegmatitic leucosomes, suggesting a late episode of melting taking place deeper than previously thought, and requiring a counter-clockwise P-T path. A final phase of anatexis ca. 1050 Ma in the Eastern AH is consistent with an influx of fluid or decompression from extension in sillimanite-bearing migmatites. Temperatures both from this study and previous work are consistent with granulite-facies metamorphism; however, the presence of kyanite requires higher pressure conditions corresponding to deeper burial of rocks exposed in the central Adirondacks. The Adirondacks are associated with the Grenville Province of eastern North America, that formed during four orogenic events. The most recent (Grenville) orogeny consisted of two stages: crustal thickening and granulite facies metamorphism during the Ottawan phase (ca 1090-1020) then metamorphism and melting in the kyanite field during the much shorter Rigolet pulse (ca 1005-980 Ma). Preliminary U-Pb SHRIMP zircon ages from Ledge Mountain kyanite-bearing migmatites suggest that melting in the Central AH persisted into the Rigolet phase. On the basis of mineral composition and chemistry and the presence of distinctive quartz-sillimanite nodules, the Ledge Mountain migmatites closely resemble the K-rich phase of the Ottawan-age Lyon Mountain granite (LMG) and may represent LMG that was metamorphosed to sillimanite grade and then overprinted by a higher pressure, lower temperature assemblage. Kyanite-bearing felsic anatectites of Rigolet age have previously been observed only in the western portion of the Grenville Province. Documentation of a counterclockwise P-T path and post-Ottawan melting in the Ledge Mountain migmatites requires re-evaluation of current tectonic models for the Grenville Province and its Adirondacks outlier. Further analysis of age, geochemical, and petrographic data will help develop a better-defined P-T-t path and may lead to the development of a new tectonic model to be compared with other collisional orogens such as Himalaya or the Bohemian Massif of the Variscan orogenic belt.

Orogenic inheritance and continental breakup: Wilson Cycle-control on rift and passive margin evolution

NASA Astrophysics Data System (ADS)

Schiffer, C.; Petersen, K. D.

2016-12-01

Rifts often develop along suture zones between previously collided continents, as part of the Wilson cycle. The North Atlantic is such an example, formed where Pangaea broke apart along Caledonian and Variscan sutures. Dipping upper mantle structures in E. Greenland and Scotland, have been interpreted as fossil subduction zones and the seismic signature indicates the presence of eclogite and serpentinite. We speculate that this orogenic material may impose a rheological control upon post-orogenic extension and we use thermo-mechanical modelling to explore such effects. Our model includes the following features: 1) Crustal thickness anomalies, 2) Eclogitised mafic crust emplaced in the mantle lithosphere, and 3) Hydrated mantle peridotite (serpentinite) formed in a pre-rift subduction setting. Our models indicate that the inherited structures control the location and the structural and magmatic evolution of the rift. Rifting of thin initial crust allows for relatively large amounts of serpentinite to be preserved within the uppermost mantle. This facilitates rapid continental breakup and serpentinite exhumation. Magmatism does not occur before continental breakup. Rifts in thicker crust preserve little or no serpentinite and thinning is more focused in the mantle lithosphere, rather than in the crust. Continental breakup is therefore preceded by magmatism. This implies that pre-rift orogenic properties may determine whether magma-poor or magma-rich conjugate margins are formed. Our models show that inherited orogenic eclogite and serpentinite are deformed and partially emplaced either as dipping structures within the lithospheric mantle or at the base of the thinned continental crust. The former is consistent with dipping sub-Moho reflectors often observed in passive margins. The latter provides an alternative interpretation of `lower crustal bodies' which are often regarded as igneous bodies. An additional implication of our models is that serpentinite, often observed seismically or exposed at the sea floor of passive margins, was formed prior to rifting in addition to syn-rift, fault-driven hydrothermal processes. Whether lower crustal and serpentinite bodies are produced previously or during rifting is of relevance for the estimation of thinning-factors of the pre-existing crust.

Discovery of Latest Cretaceous OIB-type alkaline gabbros in the Eastern Pontides Orogenic Belt, NE Turkey: Evidence for tectonic emplacement of seamounts

NASA Astrophysics Data System (ADS)

Eyuboglu, Yener; Dudas, Francis O.; Chatterjee, Nilanjan; Liu, Ze; Yılmaz-Değerli, Sedanur

2018-06-01

The Meso-Cenozoic geodynamic evolution of the Eastern Pontides Orogenic Belt, a mountain chain extending parallel to the southeastern margin of the Black Sea, has been controversial for the last forty years. Here we present data for a newly discovered alkaline gabbro body and its surrounding basaltic rocks in the northern part of the Eastern Pontides Orogenic Belt. We also provide a comprehensive assessment of the Late Mesozoic-Cenozoic geodynamic evolution of the Eastern Mediterranean region. The gabbroic body is bounded by reverse faults along its northern and southern borders and is surrounded by vesicular, pillow-fragment breccias and pillow basalts. Mineral compositions suggest that crystallization of the gabbros began at about 1170 °C, and the lowest preserved crystallization T is near 1000 °C. Estimated pressure at the beginning of crystallization is 5.7-7.4 kb. The 40Ar/39Ar dating of kaersutite and plagioclase and Usbnd Pb dating of titanite indicated that the Hayrat gabbro crystallized at 67 Ma (Late Maastrichtian). Whole rock major-trace-rare earth element and Sr-Nd-Pb isotope data indicate that the gabbros and basalts have different origins. The gabbros are alkaline and exhibit the geochemical features of OIB, whereas the basalts are tholeiitic and reveal depletions of HFSE that are similar to those of arc rocks. The gabbros are strongly fractionated, and derive from an enriched, lithospheric mantle source, with partial melting occurring in a garnet-stable environment. The basalts are less fractionated, and probably derive from a shallower source in which spinel peridotite was the predominant lithology. Considering all new and old geological, geochemical, geochronological and geophysical data from the Black Sea Basin and the Eastern Pontides-Lesser Caucasus-Alborz Orogenic Belt, we suggest that the alkaline Hayrat gabbro formed in an oceanic intraplate setting, and was accreted to the forearc region of the Eastern Pontides Orogenic Belt during southward subduction of Paleotethyan lithosphere. It was later tectonically juxtaposed with subaqueously erupted, arc-related basalts.

Structural development of an Archean Orogen, Western Point Lake, Northwest Territories

NASA Astrophysics Data System (ADS)

Kusky, Timothy M.

1991-08-01

The Point Lake orogen in the central Archean Slave Province of northwestern Canada preserves more than 10 km of structural relief through an eroded antiformal thrust stack and deeper anastomosing midcrustal mylonites. Fault restoration along a 25 km long transect requires a minimum of 69 km slip and 53 km horizontal shortening. In the western part of the orogen the basal decollement places mafic plutonic/volcanic rocks over an ancient tonalitic gneiss complex. Ten kilometers to the east in the Keskarrah Bay area, slices of gneiss unroofed on brittle thrusts shed molasse into several submerged basins. Conglomerates and associated thinly bedded sedimentary rocks are interpreted as channel, levee, and overbank facies of this thrust-related sedimentary fan system. The synorogenic erosion surface at the base of the conglomerate truncates premetamorphic or early metamorphic thrust faults formed during foreland propagation, while other thrusts related to hinterland-progressing imbrication displace this unconformity. Tightening of synorogenic depositional troughs resulted in the conglomerates' present localization in synclines to the west of associated thrust faults and steepening of structural dips. Eastern parts of the orogen consist of isoclinally folded graywackes composed largely of Mutti and Ricci-Lucchi turbidite facies B, C, and D, interpreted as submarine fan deposits eroded from a distant volcanic arc. Thrust faults in the metasedimentary terrane include highly disrupted slate horizons with meter-scale duplex structures, and recrystallized calcmylonites exhibiting sheath folds and boudin trains with very large interboudin distances. The sequence of fabric development and the overall geometry of this metasedimentary terrane strongly resembles younger forearc accretionary prisms. Conditions of deformation along the thrusts parallel the regional metamorphic zonation: amphibolite facies in the basal decollement through greenschist facies shear zones to cataclastic crush zones in the region of emergent thrusts in Keskarrah Bay. Depth differences can account for only half of the metamorphic gradient; thermal profiles which increased downwards in obducted greenstone belts and synthrusting plutonism explains other high metamorphic gradients. A tectonic model involving the collision of an accretionary prism with a continental margin best explains the structural and sedimentological evolution of the orogen.

Surface Evolution and Uplift History of the Central Apennines, Italy: New Constraints from Thermochronology and Paleoaltimetry

NASA Astrophysics Data System (ADS)

San José, M.; Faccenna, C.; Fellin, M. G.; Willett, S.; Funiciello, F.; Caves Rugenstein, J. K.

2017-12-01

The topography of mountain belts results from interactions between surface processes, lithospheric thickening, and mantle dynamics. However, the contributions of each mechanism have yet to be clearly quantified. The Apennines (Italy) provide a study area where all of these processes are at play. The central part of the Apennines is an orogenic wedge formed by the westward subducting Adriatic microplate during Miocene-Pliocene, and overlies an area of local slab detachment. Recent studies indicate anomalously high uplift rates in this area (Faccenna et al., 2015), as well as a simultaneous onset of post-orogenic extension across the Central Apennines at ̴ 2 Ma (Cosentino et al., 2017). These observations have been interpreted as an expression of dynamic topography due to the slab break-off and inherent mantle upwelling. In order to test this hypothesis and further constrain the topographic evolution of the orogen, we use low-temperature thermochronology to date the exhumation, and stable isotope paleoaltimetry (18O/16O on carbonates) to reconstruct paleoelevations. We couple this paleotopographic dataset with geomorphological analysis of the present day topography. Here we present a set of 30 new (U-Th)/He cooling ages on apatites (AHe) sampled from widespread syn-orogenic flysch basin deposits (including one high-resolution vertical profile), as well as preliminary isotopic measurements. Initial results show mean AHe ages ranging from 1.62 (± 0.38 ) Ma to 2.6 (±0.02) Ma, suggesting a regionally uniform exhumation during Pleistocene. Denudation rates inferred from our vertical profile are extremely high (>1 mm/year from 2 to 1 Ma). Some samples have not been thermally reset due to insufficient burial, and yield exhumation ages older than stratigraphic depositional ages (generally > 5 Ma). These results support the hypothesis that exhumation is mainly controlled by rapid regional scale uplift related to the opening of the Adriatic slab window at the end of the orogenic phase. However, denudation is not only driven by geodynamic processes, but also by climatic changes. Further research will consider climatic variations in the interpretation of our results.

Continental Delamination of the Romanian Eastern Carpathians: A Lower Crustal Origin of the Vrancea Seismogenic Zone?

NASA Astrophysics Data System (ADS)

Fillerup, M. A.; Knapp, J. H.; Knapp, C. C.

2006-12-01

Two lithosphere-scale, explosive-source seismic reflection profiles (DRACULA I and DACIA PLAN), inclusive of the hinterland and foreland of the Romanian Eastern Carpathians, provide new evidence for the geodynamic origin of the Vrancea Seismogenic Zone (VSZ) of Romania. These data, collected to evaluate existing subduction-related and delamination geodynamic models proposed to explain the intermediate depth seismicity associated with the Vrancea zone, show evidence of continental crust extending continuously above the VSZ from the Carpathian foreland well into the Transylvanian hinterland. Crustal thicknesses inferred from these data based on reflectivity show a 40-45 km crust below the Transylvanian basin abruptly shallowing to 32 km for ~120 km beneath the fold and thrust belt of the main Carpathian orogen and thickening again to 38-42 km crust in the foreland. This thinned crust outlines an apparent lower crustal sub-orogenic cavity that is overlain by a relatively subhorizontal reflective fabric absent of dipping reflectivity. The northwest dipping Vrancea seismogenic body, a 30x70x200 km volume of intermediate depth earthquakes, is located on the eastern flank of the apparently thin crust beneath the Carpathian orogen. Amplitude decay curves show penetration of seismic energy to a depth of ~60 km in the vicinity of the sub-orogenic cavity, implying this non- reflective zone is a geologic signature. Rotation of the VSZ about a hinge beneath the foreland basin at a depth of ~50 km restores to fill the lower-crustal cavity under the orogen, suggesting the VSZ represents a portion of brittle lower crust delaminated during continental lithospheric delamination which may have caused regional uplift of the Transylvanian basin. The lack of through-going, dipping crustal-scale boundaries along this composite lithospheric transect would appear to preclude subduction as an explanation for seismicity in the VSZ, consistent with abundant surface geologic data. These seismic data advocate possible lower crustal continental lithospheric delamination as a mechanism for generating intermediate depth seismicity in the absence of a plate boundary.

Elemental and Sr-Nd isotopic geochemistry of Cretaceous to Early Paleogene granites and volcanic rocks in the Sikhote-Alin Orogenic Belt (Russian Far East): implications for the regional tectonic evolution

NASA Astrophysics Data System (ADS)

Zhao, Pan; Jahn, Bor-ming; Xu, Bei

2017-09-01

The Sikhote-Alin Orogenic Belt in Russian Far East is an important Late Mesozoic to Early Cenozoic accretionary orogen related to the subduction of the Paleo-Pacific Plate. This belt was generated by successive accretion of terranes made of accretionary prisms, turbidite basins and island arcs to the continental margin of northeastern Asia (represented by the Bureya-Jiamusi-Khanka Block) from Jurassic to Late Cretaceous. In order to study the tectonic and crustal evolution of this orogenic belt, we carried out zircon U-Pb dating, and whole-rock elemental and Sr-Nd isotopic analyses on granites and volcanic rocks from the Primorye region of southern Sikhote-Alin. Zircon dating revealed three episodes of granitoid emplacement: Permian, Early Cretaceous and Late Cretaceous to Early Paleogene. Felsic volcanic rocks (mainly rhyolite, dacite and ignimbrite) that overlay all tectonostratigraphic terranes were erupted during 80-57 Ma, postdating the accretionary process in the Sikhote-Alin belt. The Cretaceous-Paleogene magmatism represents the most intense tectonothermal event in the Sikhote-Alin belt. Whole-rock major and trace elemental data show arc-like affinity for granitoids and volcanic rocks, indicating that they were likely generated in a supra-subduction setting. Their initial 87Sr/86Sr ratios range from 0.7048 to 0.7114, and εNd(t) values vary from +1.7 to -3.8 (mostly < 0). Thus, the elemental and Sr-Nd isotopic data suggest that the felsic magmas were generated by partial melting of source rocks comprising mantle-derived juvenile component and recycled crustal component. In addition to the occurrence in the Sikhote-Alin orogenic belt, Cretaceous to Early Paleogene magmatic rocks are also widespread in NE China, southern Korean peninsula, Japanese islands and other areas of Russian Far East, particularly along the coastal regions of the Okhotsk and Bering Seas. These rocks constitute an extended magmatic belt along the continental margin of NE Asia. The generation of this belt was ascribed to subduction of the Paleo-Pacific Plate.

Post-orogenic evolution of mountain ranges and associated foreland basins: Initial investigation of the central Pyrenees

NASA Astrophysics Data System (ADS)

Bernard, Thomas; Sinclair, Hugh; Ford, Mary; Naylor, Mark

2017-04-01

Mountain topography, including surrounding foreland basins, results from the long-term competition between tectonic and surface processes linked to climate. Numerous studies on young active mountain ranges such as the Southern Alps, New Zealand and Taiwan, have investigated the interaction between tectonics, climate and erosion on the topographic landscape. However most of the mountain ranges in the world are in various stages of post-orogenic decay, such as the European Alps, Urals, Caledonides, Appalachians and Pyrenees. The landscape evolution of these decaying mountains, which involve relatively inactive tectonics, should appear simple with progressive and relatively uniform erosion resulting in a general lowering of both elevation and topographic relief. However, in a number of examples, post-orogenic systems suggest a complex dynamism and interactions with their associated foreland basins in term of spatio-temporal variations in erosion and sedimentary flux. The complexity and transition to post-orogenesis is a function of multiple processes. Underpinning the transition to a post-orogenic state is the competition between erosion and crustal thickening; the balance of these processes determines the timing and magnitude of isostatic rebound and hence subsidence versus uplift of the foreland basin. It is expected that any change in the parameters controlling the balance of erosion versus crustal thickening will impact the topographic evolution and sediment flux from the mountain range and foreland basin to the surrounding continental margin. This study will focus on the causes and origins of the processes that define post-orogenesis. This will involve analyses of low-temperature thermochronological and topographic data, geodynamical modelling and sedimentological analyses (grainsize distribution). The Pyrenees and its associated northern retro-foreland basin, the Aquitaine basin, will form the natural laboratory for the project as it is one of the best documented mountain range/foreland basin systems in the world. Initial results of a review of the low-temperature thermochronological data using inverse modelling, illustrates the asymmetric exhumation of the mountain range, and the diachronous timing of decelerated exhumation linked to the transition to post-orogenesis. This study is part of the Orogen project, an academic-industrial collaboration (CNRS-BRGM-TOTAL).

Geochemistry and exploration criteria for epithermal cinnabar and stibnite vein deposits in the Kuskokwim River region, southwestern Alaska

USGS Publications Warehouse

Gray, J.E.; Goldfarb, R.J.; Detra, D.E.; Slaughter, K.E.

1991-01-01

Cinnabar- and stibnite-bearing epithermal vein deposits are found throughout the Kuskokwim River region of southwestern Alaska. A geochemical orientation survey was carried out around several of these epithermal lodes to obtain information for planning regional geochemical surveys and to develop procedures which maximize the anomaly: threshold contrast of the deposits. Stream sediment, heavy-mineral concentrate, stream water, and vegetation samples were collected in drainages surrounding the Red Devil, Cinnabar Creek, White Mountain, Rhyolite, and Mountain Top deposits. Three sediment size fractions; nonmagnetic, paramagnetic and magnetic splits of the concentrate samples; stream waters; and the vegetation samples were analyzed for multi-element suites by a number of different chemical procedures. Nonmagnetic, heavy-mineral concentrates were also examined microscopically to identify their mineralogy. Results confirm Hg, Sb and As concentrations in minus-80-mesh stream sediments as effective pathfinder elements in exploration for epithermal cinnabar and stibnite deposits. Coarser-grained sediments are much less effective in the exploration for these deposits. Concentrations greater than 3 ppm Hg, 1 ppm Sb, and 15 ppm As in the minus-80-mesh stream sediment, regardless of the host lithology, are indicative of upstream cinnabar-stibnite deposits. Gold, Ag and base metals in the stream sediments are ineffective pathfinders for this epithermal deposit type. Collection of heavy-mineral concentrates provides little advantage in the exploration for these mineral deposits. Antimony and As dispersion patterns downstream from mineralized areas are generally more restricted in the concentrates than those in the stream sediments. Anomalous placer cinnabar observed in the concentrates has a similar spatial distribution pattern as anomalous Hg and Sb in corresponding sediments. Stream waters are less effective than the stream sediments or heavy-mineral concentrates, and vegetation is an ineffective geochemical sample medium in exploration for this deposit type. ?? 1991.

Temporal and Spatial Distribution of Selected Species of Mercury, Carson River Superfund Site, Nevada

NASA Astrophysics Data System (ADS)

Thodal, C.; Morway, E. D.

2015-12-01

The Carson River Mercury Site in western Nevada was added to the US Environmental Protection Agency (USEPA) "Superfund" List in 1990 due to contamination from mercury used to amalgamate silver and gold from Comstock Lode ores milled during the late 1800s. The U.S. Geological Survey (USGS) has monitored concentrations of suspended sediment (SS), total mercury (THg) and methylmercury (MeHg) as well as streamflow upstream and downstream of Lahontan Reservoir since 1997 in support of USEPA Remedial Investigations. Differences between inflow and outflow concentrations indicate that nearly 90 percent of SS and unfiltered THg, and at least 50 percent of unfiltered MeHg and filtered (<0.45 μm) THg and MeHg is retained in the reservoir. However, outflow MeHg concentrations exceeded mean inflow concentration (2.9 nanograms per liter; ng/L) in 10 of 135 samples, indicating augmented mercury methylation. During August 2010 and June-September 2011, limnological profiles were measured and water samples collected from discrete depths in each of the reservoir's 3 sub-basins, the inflow delta and 2 shallow and rarely inundated overflow basins to investigate mercury distribution and methylation. In most samples, MeHg concentrations were less than 5 ng/L and increased by less than 1 ng/L in deeper samples. After temperature, oxygen, and Eh profiles indicated thermal stratification in the deep (~25 m) lower basin, samples from the top 1 m still had less than 2 ng/L MeHg but samples collected from 2 m above the sediment-water interface yielded concentrations as high as 220 ng/L in filtered water samples, accounting for 100 percent of filtered and 65 percent of unfiltered THg concentrations in concurrently-sampled water. We hypothesize that anoxic conditions and decomposition of mercury-contaminated plankton and sulfate-reduction in the hypolimnion provide carbon and mercury necessary for mercury methylation that exceeds diffusion from bottom sediment.

Granite-related Yangjiashan tungsten deposit, southern China

NASA Astrophysics Data System (ADS)

Xie, Guiqing; Mao, Jingwen; Li, Wei; Fu, Bin; Zhang, Zhiyuan

2018-04-01

The Yangjiashan scheelite-bearing deposit (38,663 metric tons of WO3 with an average ore grade of 0.70% WO3) is hosted in quartz veins in a biotite monzogranite intrusion and surrounding slate in the Xiangzhong Metallogenic Province of southern China. The monzogranite has a zircon SHRIMP U-Pb age of 406.6 ± 2.8 Ma (2σ, n = 20, MSWD = 1.4). Cassiterite coexisting with scheelite yields a weighted mean 206Pb/238U age of 409.8 ± 5.9 Ma (2σ, n = 30, MSWD = 0.20), and molybdenite intergrown with scheelite yields a weighted mean Re-Os age of 404.2 ± 3.2 Ma (2σ, n = 3, MSWD = 0.10). These results suggest that the Yangjiashan tungsten deposit is temporally related to the Devonian intrusion. The δD and calculated δ18OH2O values of quartz intergrown with scheelite range from - 87 to - 68‰, and - 1.2 to 3.4‰, respectively. Sulfides have a narrow range of δ34S values of - 2.9 to - 0.7‰ with an average value of - 1.6‰ (n = 16). The integration of geological, stable isotope, and geochronological data, combined with the quartz-muscovite greisen style of ore, supports a magmatic-hydrothermal origin for the tungsten mineralization. Compared to the more common tungsten skarn, quartz-wolframite vein, and porphyry tungsten deposits, as well as orogenic gold deposits worldwide, the Yangjiashan tungsten deposit is an unusual example of a granite-related, gold-poor, scheelite-bearing quartz vein type of deposit. The calcium needed for the formation of scheelite is derived from the sericitization of calcic plagioclase in the monzogranite and Ca-bearing psammitic country rocks, and the relatively high pH, reduced and Ca-rich mineralizing fluid may be the main reasons for the formation of scheelite rather than wolframite at Yangjiashan.

Crystalline basement map of Mauritania derived from filtered aeromagnetic data (deliverable 54_1), Aeromagnetic and geological structure map of Mauritania (phase V, deliverable 54_2), Maximum depth to basement map of Mauritania derived from Euler analysis of Aeromagnetic data (phase V, deliverable 54_3), and color composite image of radioelement data (added value): Chapter B1 in Second projet de renforcement institutionnel du secteur minier de la République Islamique de Mauritanie (PRISM-II)

USGS Publications Warehouse

Finn, Carol A.; Horton, John D.

2015-01-01

This report contains the USGS results of the PRISM-II Mauritania Minerals Project and is presented in cooperation with the Ministry of Petroleum, Energy, and Mines of the Islamic Republic of Mauritania. The Report is composed of separate chapters consisting of multidisciplinary interpretive reports with accompanying plates on the geology, structure, geochronology, geophysics, hydrogeology, geochemistry, remote sensing (Landsat TM and ASTER), and SRTM and ASTER digital elevation models of Mauritania. The syntheses of these multidisciplinary data formed the basis for additional chapters containing interpretive reports on 12 different commodities and deposit types known to occur in Mauritania, accompanied by countrywide mineral resource potential maps of each commodity/deposit type. The commodities and deposit types represented include: (1) Ni, Cu, PGE, and Cr deposits hosted in ultramafic rocks; (2) orogenic, Carlin-like, and epithermal gold deposits; (3) polymetallic Pb-Zn-Cu vein deposits; (4) sediment-hosted Pb-Zn-Ag deposits of the SEDEX and Mississippi Valley-type; (5) sediment-hosted copper deposits; ( 6) volcanogenic massive sulfide deposits; (7) iron oxide copper-gold deposits; (8) uranium deposits; (9) Algoma-, Superior-, and oolitic-type iron deposits; (10) shoreline Ti-Zr placer deposits; (11) incompatible element deposits hosted in pegmatites, alkaline rocks, and carbonatites, and; (12) industrial mineral deposits. Additional chapters include the Mauritanian National Mineral Deposits Database are accompanied by an explanatory text and the Mauritania Minerals Project GIS that contains all of the interpretive layers created by USGS scientists. Raw data not in the public domain may be obtained from the Ministry of Petroleum, Energy, and Mines in Nouakchott, Mauritania.

Geometry, kinematics and tectonic models of the Kazakhstan Orocline, Central Asian Orogenic Belt

NASA Astrophysics Data System (ADS)

Li, Pengfei; Sun, Min; Rosenbaum, Gideon; Yuan, Chao; Safonova, Inna; Cai, Keda; Jiang, Yingde; Zhang, Yunying

2018-03-01

The Central Asian Orogenic Belt (CAOB) is one of the largest accretionary orogens on Earth and is characterized by the occurrence of tight oroclines (Kazakhstan and Tuva-Mongolian oroclines). The origin of these large-scale orogenic curvatures is not quite understood, but is fundamentally important for understanding crustal growth and tectonic evolution of the CAOB. Here we provide an outline of available geological and paleomagnetic data around the Kazakhstan Orocline, with an aim of clarifying the geometry, kinematics and geodynamic origin of the orocline. The Kazakhstan Orocline is evident in a total magmatic image, and can be traced by the continuation of high magnetic anomalies associated with the Devonian Volcanic Belt and the Late Devonian to Carboniferous Balkhash-Yili arc. Paleomagnetic data show ∼112-126° clockwise rotation of the northern limb relative to the southern limb in the Late Devonian to Early Carboniferous, as well as ∼15-28° clockwise rotation of the northern limb and ∼39-40° anticlockwise rotation of the southern limb relative to the hinge of the orocline during the Late Carboniferous to Permian. We argue that the Kazakhstan Orocline experienced two-stage bending with the early stage of bending (Late Devonian to Early Carboniferous; ∼112-126°) driven by slab rollback, and the later stage (Late Carboniferous to Permian; 54-68°) possibly associated with the amalgamation of the Siberian, Tarim and Baltic cratons. This new tectonic model is compatible with the occurrence of rift basins, the spatial migration of magmatic arc, and the development of large-scale strike-slip fault systems during oroclinal bending.

On protolith-, metamorphic overprint, microstructure and rheology of mineral assemblages in orogenic peridotites of the central Scandinavian Caledonides

NASA Astrophysics Data System (ADS)

Gilio, Mattia; Clos, Frediano; Van Roermund, Herman L. M.

2013-04-01

The Scandinavian Caledonides (SC) are a deeply eroded Alpine-type orogenic belt formed by closure of the Iapetus ocean and collision between Baltica and Laurentia (500-380 Ma). The SC consists of a stack of Nappe Complexes (from bottom to top called Lower, Middle, Upper and Uppermost Allochthons) thrusted to the east over the Baltic Shield (Brueckner and Van Roermund, 2004; Gee et al., 2008). Fossil lithospheric mantle fragments, called orogenic peridotites, have been found within the (upper part of) middle, upper and uppermost Allochthons, as well as in the reworked basement gneisses (a.o Western Gneiss Complex (WGC)) along the Norwegian west coast. They occur as isolated lenses that contain diverse mineral parageneses and/or bulk rock compositions. Crustal incorporation of orogenic peridotite is classically interpreted to be the result of plate collisional processes related to orogeny (Brueckner and Medaris, 2000). The WGC and parts of the upper part of the Middle Allochthon (a.o. Seve Nappe Complex (SNC) in N Jämtland/S Västerbotten, central Sweden), are well known for the occurrence of high (HP) and ultrahigh pressure (UHP) metamorphic terranes (of Caledonian age). The (U)HPM evidence clearly demonstrates the deep metamorphic origin of these rocks interpreted to be caused by continental subduction and/or collision. Other metamorphic rocks (of Caledonian age) exposed in allochthonous nappes are solely characterised by greenschist-, amphibolite- and/or MP granulite "facies" mineral assemblages that can be interpreted, in the absence of retrogression, to have formed in less deeply subducted (and/or metamorphic) environments. This duality in metamorphic "facies" allows for a discrimination (at least theoretically) between "deep" versus "shallow" rooted nappes (in central parts of the Scandinavian Caledonides). Conform this reasoning, this duality should also be present within the Caledonian mineral assemblages (= metamorphic overprint) of orogenic peridotites (in central parts of the orogen), which, at least in the allochtonous nappes, have been interpreted to be "isofacial" with their host country rocks (Bucher, 1991). The latter strongly contrast to the interpretation of their "primary" (="protolith"- related) mineral assemblage(s) which clearly suggest a bimodal origin: here called thick (>80 km) versus thin (< 70 km) rooted lithospheric mantle protoliths. Distinction can be made on the basis of the presence of the stable (minimal Proterozoic) garnet-olivine assemblages in the protolith (i.e. much older than the Scandian collision event (Brueckner et al., 2010). For this reason orogenic garnet peridotite was first called "relict" garnet peridotite (Brueckner and Medaris, 2000), later rephrased into mantle wedge garnet peridotite (MWgp) by Van Roermund (2009). MWgp occurs in the WGC and in the SNC of the Upper Allochthon in central Sweden (Zhang et al., 2009). Most (All?) other protolith assemblages of orogenic peridotite in the CSC belong to the thin-rooted protolith subtype. No examples are known to us in which thin rooted prototypes became overprinted (during the Caledonian orogeny) by (U)HP metamorphic minerals, except for the subduction zone garnet peridotites (SZgp) in the WGC (Van Roermund, 2009). The latter can thus savely be interpreted as being enclosed within normal "MP" (or lower pressure) nappe sequences. As such it will be clear that this duality in protolith (and/or metamorphic) mineral assemblages of orogenic peridotite can be used to identify former, but now strongly retrogressed, (U)HP metamorphic terranes in other parts of the CSC (Gee et al, 2012). For this reason a comparative study has been made concerning field, (micro-)structural, mineral-chemical and/or geochemical aspects of two major orogenic peridotites from the SNC, central Sweden; here called the Friningen Garnet Peridotite (FGP) and the Kittelfjäll Spinel Peridotite (KSP), both exposed within the central belt of the SNC in central Sweden. The ultimate aim was to investigate whether the MWgp sub-type can be extended towards (Al-poor) spinel-bearing protolith assemblages or not. Results, including some hitherto unexpected mechanical effects, will be presented. References: Brueckner, H.K., Carswell, D.A., Griffin, W.L., Medaris, L.G., Van Roermund, H.L.M., Cuthbert, S.J. (2010). The mantle and crustal evolution of two garnet peridotite suites from the Western Gneiss Region, Norwegian Caledonides: An isotopic investigation. Lithos, 117, 1-19. doi:10.1016/j. Lithos.2010.01.011 Brueckner, H.K.and Medaris, L.G. (2000). A general model for the intrusion and evolution of "mantle" garnet peridotites in high-pressure and ultra-high-pressure metamorphic terranes. J. Metamorphic Geol., 18, 123-133. Brueckner H.K. and Van Roermund,H.L.M. (2004). Dunk tectonics: A multiple subduction//eduction model for the evolution of the Scandinavian Caledonides. Tectonics, 23, TC2004, doi:10.1029/2003tc001502. Bucher, K. (1991). Mantle fragments in the Scandinavian Caledonides. Tectonophysics, 190, 173-192. Gee, D.G., Fossen, H., Henriksen, N., Higgins, K. (2008). From the Early Paleozoic Platforms of Baltica and Laurentia to the Caledonide Orogen of Scandinavia and Greenland. Episodes, 31, 44-51. Gee, D.G., Janak, M., Majka, J., Robinson, P., Van Roermund, H.L.M (2012). UHP metamorphism along the Baltoscandian outer margin: evidence from the Seve Nappe Complex of the Swedish Caledonides. Lithosphere, in press. Janak, M., Van Roermund, H., Majka, J., Gee, D. (2012). UHP metamorphism recorded by kyanite-bearing eclogite in the Seve Nappe Complex of northern Jämtland, Swedish Caledonides. Gondwana Research, in press. Van Roermund, H.L.M. (2009). Mantle-wedge garnet peridotites from the northernmost ultra-high pressure domain of the Western Gneiss Region, SW Norway. Eur. J. Mineralogy, 21, 1085-1096. Zhang, C., Van Roermund, H.L.M., Zhang, L.F (2011). 16 - Orogenic Garnet Peridotites: Tools to Reconstruct Paleo-Geodynamic Settings of Fossil Continental Collision Zones. In: Ultrahigh Pressure Metamorphism, 25 Years After The Discovery Of Coesite And Diamond. London. Doi:10.1016/B978-0-12-385144-4.00015-1

Crustal Uplift In The Alps and Why The Drainage Pattern Matters: An Alternative Way To Interpret Geodetic Data

NASA Astrophysics Data System (ADS)

Schlunegger, F.; Hinderer, M.

The Alpine drainage system comprises two large orogen-parallel drainage basins in the core of the Alps (the Rhone and Rhein valleys), and smaller orogen-normal ori- ented systems. Discharge of the large rivers is ca. 5-10 higher than that of the small ones. Also, the courses of the Rhone and Rhein Rivers are trapped by faults and thrusts that display lower erosional resistance than the neighbouring lithologies. Enhanced discharge of these rivers and low erosional resistance of bedrocks potentially enhances surface erosion. Indeed, present-day and glacial sediment yields have been ca. 1.6-1.7 times higher in these valleys than in the orogen-normal systems. Interestingly, geode- tic measurements indicate that rates of crustal uplift are also enhanced in the Rhein and Rhone valleys, where rates of ca. 1.4-1.6 mm/yr are currently measured. We inter- pret the spatial coincidence between the location of enhanced erosion and maximum crustal uplift rates to reflect a positive feedback between surface erosion and tectonic forcing.

Origin of unusual HREE-Mo-rich carbonatites in the Qinling orogen, China

NASA Astrophysics Data System (ADS)

Song, Wenlei; Xu, Cheng; Smith, Martin P.; Kynicky, Jindrich; Huang, Kangjun; Wei, Chunwan; Zhou, Li; Shu, Qihai

2016-11-01

Carbonatites, usually occurring within intra-continental rift-related settings, have strong light rare earth element (LREE) enrichment; they rarely contain economic heavy REE (HREE). Here, we report the identification of Late Triassic HREE-Mo-rich carbonatites in the northernmost Qinling orogen. The rocks contain abundant primary HREE minerals and molybdenite. Calcite-hosted fluid inclusions, inferred to represent a magmatic-derived aqueous fluid phase, contain significant concentrations of Mo (~17 ppm), reinforcing the inference that these carbonatitic magmas had high Mo concentrations. By contrast, Late Triassic carbonatites in southernmost Qinling have economic LREE concentrations, but are depleted in HREE and Mo. Both of these carbonatite types have low δ26Mg values (-1.89 to -1.07‰), similar to sedimentary carbonates, suggesting a recycled sediment contribution for REE enrichment in their mantle sources. We propose that the carbonatites in the Qinling orogen were formed, at least in part, by the melting of a subducted carbonate-bearing slab, and that 10 Ma younger carbonatite magmas in the northernmost Qinling metasomatized the thickened eclogitic lower crust to produce high levels of HREE and Mo.

Origin of unusual HREE-Mo-rich carbonatites in the Qinling orogen, China.

PubMed

Song, Wenlei; Xu, Cheng; Smith, Martin P; Kynicky, Jindrich; Huang, Kangjun; Wei, Chunwan; Zhou, Li; Shu, Qihai

2016-11-18

Carbonatites, usually occurring within intra-continental rift-related settings, have strong light rare earth element (LREE) enrichment; they rarely contain economic heavy REE (HREE). Here, we report the identification of Late Triassic HREE-Mo-rich carbonatites in the northernmost Qinling orogen. The rocks contain abundant primary HREE minerals and molybdenite. Calcite-hosted fluid inclusions, inferred to represent a magmatic-derived aqueous fluid phase, contain significant concentrations of Mo (~17 ppm), reinforcing the inference that these carbonatitic magmas had high Mo concentrations. By contrast, Late Triassic carbonatites in southernmost Qinling have economic LREE concentrations, but are depleted in HREE and Mo. Both of these carbonatite types have low δ 26 Mg values (-1.89 to -1.07‰), similar to sedimentary carbonates, suggesting a recycled sediment contribution for REE enrichment in their mantle sources. We propose that the carbonatites in the Qinling orogen were formed, at least in part, by the melting of a subducted carbonate-bearing slab, and that 10 Ma younger carbonatite magmas in the northernmost Qinling metasomatized the thickened eclogitic lower crust to produce high levels of HREE and Mo.

Relationship Between Earthquake b-Values and Crustal Stresses in a Young Orogenic Belt

NASA Astrophysics Data System (ADS)

Wu, Yih-Min; Chen, Sean Kuanhsiang; Huang, Ting-Chung; Huang, Hsin-Hua; Chao, Wei-An; Koulakov, Ivan

2018-02-01

It has been reported that earthquake b-values decrease linearly with the differential stresses in the continental crust and subduction zones. Here we report a regression-derived relation between earthquake b-values and crustal stresses using the Anderson fault parameter (Aϕ) in a young orogenic belt of Taiwan. This regression relation is well established by using a large and complete earthquake catalog for Taiwan. The data set consists of b-values and Aϕ values derived from relocated earthquakes and focal mechanisms, respectively. Our results show that b-values decrease linearly with the Aϕ values at crustal depths with a high correlation coefficient of -0.9. Thus, b-values could be used as stress indicators for orogenic belts. However, the state of stress is relatively well correlated with the surface geological setting with respect to earthquake b-values in Taiwan. Temporal variations in the b-value could constitute one of the main reasons for the spatial heterogeneity of b-values. We therefore suggest that b-values could be highly sensitive to temporal stress variations.

Oxygen isotopes of marine mollusc shells record Eocene elevation change in the Pyrenees

NASA Astrophysics Data System (ADS)

Huyghe, Damien; Mouthereau, Frédéric; Emmanuel, Laurent

2012-09-01

Constraining paleoaltimetry of collisional orogens is critical to understand the dynamics of topographic evolution and climate/tectonics retroactions. Here, we use oxygen stable-isotope record on oyster shells, preserved in marine foreland deposits, to examine the past elevation of the Pyrenees during the Eocene. Our approach is based on the comparison with the Paris basin, an intracratonic basin not influenced by orogenic growth. The finding of a shift of 1.5‰ between 49 and 41 Ma, indicating more negative δ18Oc in the south Pyrenean foreland, is interpreted to reflect the inflow of river water sourced from higher elevation in the Pyrenees. To test this and provide paleoelevation estimate, we adopt a morphologic-hydrological model accounting for the hypsometry of drainage basin. Our best fitting model shows that the Pyrenees rose up to 2000 m. This indicates that the Pyrenees reached high elevation in the Eocene, thus providing new critical constraints on their long-term orogenic development. δ18O of marine mollusc shells are proved potentially attractive for paleoelevation studies, especially for mountain belts where elevated continental surfaces have not been preserved.

Linking orogen and peripheral foreland basin: conceptual model and application to the Southalpine-Dinaric (Friuli) orocline

NASA Astrophysics Data System (ADS)

Heberer, Bianca; Neubauer, Franz

2010-05-01

Surface uplift and rock exhumation within an orogen are generally a consequence of convergence, and can often be linked with subsidence in a peripheral foreland. Since vertical loads act on the entire lithosphere, these processes can, therefore, be considered as plate-scale processes. Here, we propose a conceptual model for this linkage for the Friuli orocline and its surrounding units. The Friuli orocline stretches from the ENE-trending Southern Alps to the SE-trending Dinarides. There, two Neogene stages of convergence and associated deformation can be differentiated: (1) a Mid-Late Miocene phase of increased surface uplift and intra-orogenic subsidence of sedimentary basins reflecting intra-orogenic crustal-scale folding. Depocentres are e.g. the flexural Belluno, Ljubljana and Klagenfurt basins. (2) A second stage of convergence during Late Pliocene-Pleistocene times led to overall surface uplift in the orogen and contemporaneous pronounced subsidence in the peripheral foreland basin (Venetian platform and the northern Adriatic Sea). We propose, that the spatially variable extent of subsidence originates in variably strong orogen-basin coupling, i.e. weak coupling during stage 1 vs. strong coupling during stage 2. This interpretation is based on the apatite fission track age pattern, the distribution of intra-orogenic Neogene sediment basins and subsidence analyses in the foreland basin (Barbieri et al., 2007). Available low-temperature thermochronological data for the Southern Alps and the NW Dinarides are sparse, in contrast to a dense network of primarily apatite fission track ages north of the Periadriatic lineament (e.g. summarized by Luth & Willingshofer, 2008). AFT ages adjacent to the eastern Periadriatic Lineament mainly range from 15 to 25 Ma (Hejl, 1997; Fodor et al., 2008). Detrital studies on Oligocene to Miocene sediments from the Venetian foreland basin yielded dominant age groups clustering roughly around 20 and 30 Ma (Stefani et al., 2008). Bedrock ages from the vicinity of the Valsugana thrust indicate an important exhumational event at about 10 Ma (Zattin et al., 2006). The existing data already hint at decreasing rates of thermal overprint towards the foreland. Basement uplifts partly display AFT ages contemporaneous to subsidence in intra-orogenic basins. Consequently, existing AFT data and their relationships to intervening Neogene basins suggest a Neogene large-wavelength crustal-scale fold structure between the Klagenfurt basin and the Adriatic Sea. The main stage of subsidence in the Venetian-Adriatic foreland is younger and of Late Pliocene-Pleistocene age reflecting the final, still ongoing stage of shortening (Barbieri et al., 2007). In order to further test these observations, we aim at collecting more structural and low-T thermochronological data from the region. First results from the recently started project "AlDi-Adria" will be presented. References Barbieri, C. et al. 2007: Natural subsidence of the Venice area during the last 60 Myr. Basin Res., 19, 105-123. Fodor, L. et al. 2008: Miocene emplacement and rapid cooling of the Pohorje pluton at the Alpine-Pannonian-Dinaric junction: a geochronological and structural study. Swiss J. Geosci., 101 Suppl. 1, S255-S271. Hejl, E. 1997: 'Cold spots' during the Cenozoic evolution of the Eastern Alps: thermochronological interpretation of apatite fission-track data. Tectonophysics, 272, 159-172. Luth S. W. & Willingshofer, E. 2008: Mapping of the Post-Collisional Cooling History of the Eastern Alps. Swiss J. Geosci., 101, 207-223. Stefani, C. 2008: Provenance and Paleogeographic Evolution in a Multi-Source Foreland: The Cenozoic Venetian-Friulian Basin (NE Italy). J. Sediment. Res., 77, 867-887. Zattin, M. et al. 2006: From Middle Jurassic heating to Neogene cooling: The thermochronological evolution of the southern Alps. Tectonophysics, 414, 191-202.

87Sr/86Sr ratios in some eugeosynclinal sedimentary rocks and their bearing on the origin of granitic magma in orogenic belts

USGS Publications Warehouse

Peterman, Z.E.; Hedge, C.E.; Coleman, R.G.; Snavely, P.D.

1967-01-01

Rb and Sr contents and 87Sr/86Sr values were determined for samples of eugeosynclinal sedimentary rocks, mostly graywackes, from Oregon and California. These data are compatible with the theory of anataxis of eugeosynclinal sedimentary rocks in orogenic belts to produce granitic magmas provided that the melting occurs within several hundreds of m.y. after sedimentation. The low (87Sr/86Sr)0 values of the eugeosynclinal sedimentary rocks are related to the significant amounts of volcanogenic detritus present which probably were originally derived from the mantle. ?? 1967.

Basement thrust sheets in the Clearwater orogenic zone, central Idaho and western Montana

NASA Astrophysics Data System (ADS)

Skipp, Betty

1987-03-01

The Clearwater orogenic zone in central Idaho and western Montana contains at least two major northeast-directed Cordilleran thrust plates of Early Proterozoic metasedimentary and metaigneous rocks that overrode previously folded Middle Proterozoic rocks of the Belt basin in Cretaceous time. The northeastward migration of the resultant thickened wedge of crustal material combined with Cretaceous subduction along the western continental margin produced a younger northern Bitterroot lobe of the Idaho batholith relative to an older southern Atlanta lobe. Eocene extensional unroofing and erosion of the Bitterroot lobe has exposed the roots of the thick Cordilleran thrust sheets.

The coupled geochemistry of Au and As in pyrite from hydrothermal ore deposits

NASA Astrophysics Data System (ADS)

Deditius, Artur P.; Reich, Martin; Kesler, Stephen E.; Utsunomiya, Satoshi; Chryssoulis, Stephen L.; Walshe, John; Ewing, Rodney C.

2014-09-01

The ubiquity of Au-bearing arsenian pyrite in hydrothermal ore deposits suggests that the coupled geochemical behaviour of Au and As in this sulfide occurs under a wide range of physico-chemical conditions. Despite significant advances in the last 20 years, fundamental factors controlling Au and As ratios in pyrite from ore deposits remain poorly known. Here we explore these constraints using new and previously published EMPA, LA-ICP-MS, SIMS, and μ-PIXE analyses of As and Au in pyrite from Carlin-type Au, epithermal Au, porphyry Cu, Cu-Au, and orogenic Au deposits, volcanogenic massive sulfide (VHMS), Witwatersrand Au, iron oxide copper gold (IOCG), and coal deposits. Pyrite included in the data compilation formed under temperatures from ∼30 to ∼600 °C and in a wide variety of geological environments. The pyrite Au-As data form a wedge-shaped zone in compositional space, and the fact that most data points plot below the solid solubility limit defined by Reich et al. (2005) indicate that Au1+ is the dominant form of Au in arsenian pyrite and that Au-bearing ore fluids that deposit this sulfide are mostly undersaturated with respect to native Au. The analytical data also show that the solid solubility limit of Au in arsenian pyrite defined by an Au/As ratio of 0.02 is independent of the geochemical environment of pyrite formation and rather depends on the crystal-chemical properties of pyrite and post-depositional alteration. Compilation of Au-As concentrations and formation temperatures for pyrite indicates that Au and As solubility in pyrite is retrograde; Au and As contents decrease as a function of increasing temperature from ∼200 to ∼500 °C. Based on these results, two major Au-As trends for Au-bearing arsenian pyrite from ore deposits are defined. One trend is formed by pyrites from Carlin-type and orogenic Au deposits where compositions are largely controlled by fluid-rock interactions and/or can be highly perturbed by changes in temperature and alteration by hydrothermal fluids. The second trend consists of pyrites from porphyry Cu and epithermal Au deposits, which are characterised by compositions that preserve the Au/As signature of mineralizing magmatic-hydrothermal fluids, confirming the role of this sulfide in controlling metal ratios in ore systems.

Shear zones of the Verkhoyansk fold-and-thrust belt, Northeast Russia

NASA Astrophysics Data System (ADS)

Fridovsky, Valery; Polufuntikova, Lena

2017-04-01

The Verkhoyansk fold-and-thrust belt is situated on the submerged eastern margin of the North Asian craton, and is largely composed of the Ediacaran - Middle Paleozoic carbonate and the Upper Paleozoic-Mesozoic terrigenous rocks. The Upper Carboniferous - Jurassic sediments constitute the Verkhoyansk terrigenous complex containing economically viable orogenic gold deposits. The structure of the belt is mainly controlled by thrusts and associated diagonal strike slips. Linear concentric folds are common all over the area of the belt. Shear zones with associated similar folds are confined to long narrow areas. Shear zones were formed during the early stages of the Oxfordian-Kimmeridgian collisional and accretionary events prior to the emplacement of large orogenic granitoid plutons. The main ore-controlling structures are shear zones associated with slaty cleavage, shear folds, mullion- and boudinage-structures, and transposition features. The shear zones are listric-type, and represent branches of a detachment structure, which is assumed to be present at the base of the Verkhoyansk fold-and-thrust belt. A vertical zonation of shear zones is correlated with the distance to the detachment. Changes in the dip angle of the shear zones (as indicated mainly by cleavage), structural paragenesis, the degree of microdeformation of the host rocks, and the type of ore-controlling structures can be clearly observed in the direction away from the detachment. Structural zoning is evidenced, among other things, by changing morphologic types of microstructures and by strain-indicators of the degree of rock metamorphism. Four morphologic types of microstructures are identified. The first platy-shear type is characterized by aggregate cleavage and the coefficient of deformation (Cd) of single grains from 1.0 to 2.0. Irregular angular fragments of variously oriented grains can be observed in thin sections. The second shear-cataclastic morphologic type (Cd from 2.0 to 3.0) exhibits combined aggregate and intergranular cleavage. The third cataclastic-segregation morphologic type (Cd from 3.0 to 4.5) is distinguished by a wide distribution of lentelliptical grains of rock-forming minerals in a finely-crystalline matrix and by intergranular cleavage. The rocks of the fourth segregation-striate morphologic type (Cd >5.0) contain lenticular segregations of quartz and feldspar in an intensely linearized mylonite groundmass.

The eye of the field geologist and the mind of the tectonician: one view of dynamic crustal rheology in convergent orogens

NASA Astrophysics Data System (ADS)

Brown, M.

2004-05-01

Orogens record evidence of interaction between converging plates. However, the response of continental crust to tectonic and gravitational loads is dependent on rheology, which is influenced by composition, architecture, thermal profile and strain rate. Crustal rocks undergo melting in deeper parts of orogens. Greywackes and metapelites are the most fertile protoliths, generating 20-50 and 30 vol. % melt respectively at 1 GPa and 1173K; geophysical data suggest >6 but <20 vol. % interconnected melt in deep crust of active orogens. In numerical models of orogens, the transition from coupled doubly-vergent wedge structure to plateau formation and full basal decoupling requires a viscosity drop of 4 orders of magnitude, inferred to be melt weakening. Deformation experiments on granite indicate a dramatic drop in strength (to 100-200 MPa) as the melt wetting transition is approached at 7 vol. % melt, and a more gradual decrease to <1 MPa prior to the drop at the solid-to-liquid transition (RCMP). Important properties of melting systems are viscosity of the melt, rheology of the crystalline framework of grains and permeability of this framework to flow. Permeability is due to an intergranular network of connected pores, compositional layering/fabric and networks of deformation bands; melt distribution is heterogeneous on multiple length scales. The microstructure of anatectic rocks and the magnitude of weakening accompanying melting suggest a limited role for intracrystalline plasticity with increasing vol. % melt and dominance of melt-assisted diffusion creep or diffusion accommodated granular flow. The intrinsic weakness of melt-bearing intervals in the crust makes them ideal detachment horizons. Observations from metasedimentary migmatitic granulites show preservation of (i) early fabrics, suggesting that the strain field emergent under subsolidus conditions controlled initial distribution of melt produced by suprasolidus mica breakdown, and (ii) layering in melt-depleted rocks, implying that they were quasi-continuously drained. Studies of migmatitic granulites demonstrate that melt migrates from grain boundaries to mesoscale networks of structures (mm to m) to steeply-inclined conduits recorded by rod or tabular granite intrusions (m to dm). Melt loss from lower crust yields residual rocks composed of strong minerals (feldspar, pyroxene and garnet) with only minor melt on grain boundaries. Thus, weakening of lower crust due to melting is followed by its strengthening. Around the brittle-to-viscous transition zone granite accumulates in subhorizontal tabular plutons, which implies transient presence of significantly weaker layers in shallow orogenic crust; these are potential detachment horizons. Field studies of exhumed orogens suggest deformation commonly is laterally, transversely and vertically diachronous, reflecting the spatial and temporal variation in the weakening-to-strengthening cycle. There may be important sub-horizontal movement horizons, which allow (partial) decoupling of crustal layers. At upper-to-middle crustal levels rocks are metamorphosed in greenschist-amphibolite facies, with local enhancement by pluton-advected heat to amphibolite-granulite facies and thrust-style brittle-ductile deformation (e.g., Acadian, NH). Rocks from middle crustal levels are in amphibolite facies and have penetrative steep fabrics (e.g., Acadian, western ME) or exhibit a complex network of shallowly- and steeply-dipping fabrics (e.g., St. Malo, France). Rocks from lower crustal levels are in amphibolite-granulite facies and have shallow fabrics due to crustal flow, although these may be steepened by later deformation including core-complex formation (e.g., S. Brittany, France).

East African and Kuunga Orogenies in Tanzania - South Kenya

NASA Astrophysics Data System (ADS)

Fritz, H.; Hauzenberger, C. A.; Tenczer, V.

2012-04-01

Tanzania and southern Kenya hold a key position for reconstructing Gondwana consolidation because here different orogen belts with different tectonic styles interfere. The older, ca. 650-620 Ma East African Orogeny resulted from the amalgamation of arc terranes in the northern Arabian-Nubian Shield (ANS) and continental collision between East African pieces and parts of the Azania terrane in the south (Collins and Pisarevsky, 2005). The change form arc suturing to continental collision settings is found in southern Kenya where southernmost arcs of the ANS conjoin with thickened continental margin suites of the Eastern Granulite Belt. The younger ca. 570-530 Ma Kuunga orogeny heads from the Damara - Zambesi - Irumide Belts (De Waele et al., 2006) over Tanzania - Mozambique to southern India and clashes with the East African orogen in southern-central Tanzania. Two transitional orogen settings may be defined, (1) that between island arcs and inverted passive continental margin within the East African Orogen and, (2) that between N-S trending East African and W-E trending Kuungan orogenies. The Neoproterozoic island arc suites of SE-Kenya are exposed as a narrow stripe between western Azania and the Eastern Granulite belt. This suture is a steep, NNW stretched belt that aligns roughly with the prominent southern ANS shear zones that converge at the southern tip of the ANS (Athi and Aswa shear zones). Oblique convergence resulted in low-vorticity sinstral shear during early phases of deformation. Syn-magmatic and syn-tectonic textures are compatible with deformation at granulite metamorphic conditions and rocks exhumed quickly during ongoing transcurrent motion. The belt is typified as wrench tectonic belt with horizontal northwards flow of rocks within deeper portions of an island arc. The adjacent Eastern Granulite Nappe experienced westward directed, subhorizontal, low-vorticity, high temperature flow at partly extreme metamorphic conditions (900°C, 1.2 to 1.4 GPa) (Fritz et al., 2009). Majority of data suggest an anticlockwise P-T loop and prolonged, slow cooling at deep crustal levels without significant exhumation. Isobaric cooling is explained by horizontal flow with rates faster than thermal equilibration of the lower crust. Those settings are found in domains of previously thinned lithosphere such as extended passive margins. Such rheolgically weak plate boundaries do not produce self-sustaining one-sided subduction but large areas of magmatic underplating that enable melt enhanced lateral flow of the lower crust. Western Granulites deformed by high-vorticity westwards thrusting at c. 550 Ma (Kuunga orogeny). Rocks exhibit clockwise P-T paths and experienced significant exhumation during isothermal decompression. Overprint between Kuungan structures and 620 Ma East African fabrics resulted in complex interference pattern within the Eastern Granulites. The three orogen portions that converge in Tanzania / Southern Kenya have different orogen styles. The southern ANS formed by transcurrent deformation of an island arc root; the Eastern Granulites by lower crustal channelized flow of a hot inverted passive margin; the Western Granulites by lower to mid crustal stacking of old and cold crustal fragments. Collins, A.S., Pisarevsky, S.A. (2005). Amalgamating eastern Gondwana: The evolution of the Circum-Indian Orogens. Earth-Science Reviews, 71, 229-270. De Waele, B., Kampunzu, A.B., Mapani, B.S.E., Tembo, F. (2006). The Mesoproterozoic Irumide belt of Zambia. Journal of African Earth Sciences, 46, 36-70 Fritz, H., Tenczer, V., Hauzenberger, C., Wallbrecher, E., Muhongo, S. (2009). Hot granulite nappes — Tectonic styles and thermal evolution of the Proterozoic granulite belts in East Africa. Tectonophysics, 477, 160-173.

Earthquake activity along the Himalayan orogenic belt

NASA Astrophysics Data System (ADS)

Bai, L.; Mori, J. J.

2017-12-01

The collision between the Indian and Eurasian plates formed the Himalayas, the largest orogenic belt on the Earth. The entire region accommodates shallow earthquakes, while intermediate-depth earthquakes are concentrated at the eastern and western Himalayan syntaxis. Here we investigate the focal depths, fault plane solutions, and source rupture process for three earthquake sequences, which are located at the western, central and eastern regions of the Himalayan orogenic belt. The Pamir-Hindu Kush region is located at the western Himalayan syntaxis and is characterized by extreme shortening of the upper crust and strong interaction of various layers of the lithosphere. Many shallow earthquakes occur on the Main Pamir Thrust at focal depths shallower than 20 km, while intermediate-deep earthquakes are mostly located below 75 km. Large intermediate-depth earthquakes occur frequently at the western Himalayan syntaxis about every 10 years on average. The 2015 Nepal earthquake is located in the central Himalayas. It is a typical megathrust earthquake that occurred on the shallow portion of the Main Himalayan Thrust (MHT). Many of the aftershocks are located above the MHT and illuminate faulting structures in the hanging wall with dip angles that are steeper than the MHT. These observations provide new constraints on the collision and uplift processes for the Himalaya orogenic belt. The Indo-Burma region is located south of the eastern Himalayan syntaxis, where the strike of the plate boundary suddenly changes from nearly east-west at the Himalayas to nearly north-south at the Burma Arc. The Burma arc subduction zone is a typical oblique plate convergence zone. The eastern boundary is the north-south striking dextral Sagaing fault, which hosts many shallow earthquakes with focal depth less than 25 km. In contrast, intermediate-depth earthquakes along the subduction zone reflect east-west trending reverse faulting.

Mid-Pleistocene climate transition drives net mass loss from rapidly uplifting St. Elias Mountains, Alaska.

PubMed

Gulick, Sean P S; Jaeger, John M; Mix, Alan C; Asahi, Hirofumi; Bahlburg, Heinrich; Belanger, Christina L; Berbel, Glaucia B B; Childress, Laurel; Cowan, Ellen; Drab, Laureen; Forwick, Matthias; Fukumura, Akemi; Ge, Shulan; Gupta, Shyam; Kioka, Arata; Konno, Susumu; LeVay, Leah J; März, Christian; Matsuzaki, Kenji M; McClymont, Erin L; Moy, Chris; Müller, Juliane; Nakamura, Atsunori; Ojima, Takanori; Ribeiro, Fabiana R; Ridgway, Kenneth D; Romero, Oscar E; Slagle, Angela L; Stoner, Joseph S; St-Onge, Guillaume; Suto, Itsuki; Walczak, Maureen D; Worthington, Lindsay L; Bailey, Ian; Enkelmann, Eva; Reece, Robert; Swartz, John M

2015-12-08

Erosion, sediment production, and routing on a tectonically active continental margin reflect both tectonic and climatic processes; partitioning the relative importance of these processes remains controversial. Gulf of Alaska contains a preserved sedimentary record of the Yakutat Terrane collision with North America. Because tectonic convergence in the coastal St. Elias orogen has been roughly constant for 6 My, variations in its eroded sediments preserved in the offshore Surveyor Fan constrain a budget of tectonic material influx, erosion, and sediment output. Seismically imaged sediment volumes calibrated with chronologies derived from Integrated Ocean Drilling Program boreholes show that erosion accelerated in response to Northern Hemisphere glacial intensification (∼ 2.7 Ma) and that the 900-km-long Surveyor Channel inception appears to correlate with this event. However, tectonic influx exceeded integrated sediment efflux over the interval 2.8-1.2 Ma. Volumetric erosion accelerated following the onset of quasi-periodic (∼ 100-ky) glacial cycles in the mid-Pleistocene climate transition (1.2-0.7 Ma). Since then, erosion and transport of material out of the orogen has outpaced tectonic influx by 50-80%. Such a rapid net mass loss explains apparent increases in exhumation rates inferred onshore from exposure dates and mapped out-of-sequence fault patterns. The 1.2-My mass budget imbalance must relax back toward equilibrium in balance with tectonic influx over the timescale of orogenic wedge response (millions of years). The St. Elias Range provides a key example of how active orogenic systems respond to transient mass fluxes, and of the possible influence of climate-driven erosive processes that diverge from equilibrium on the million-year scale.

Mountain building processes during continent continent collision in the Uralides

NASA Astrophysics Data System (ADS)

Brown, D.; Juhlin, C.; Ayala, C.; Tryggvason, A.; Bea, F.; Alvarez-Marron, J.; Carbonell, R.; Seward, D.; Glasmacher, U.; Puchkov, V.; Perez-Estaun, A.

2008-08-01

Since the early 1990's the Paleozoic Uralide Orogen of Russia has been the target of a significant research initiative as part of EUROPROBE and GEODE, both European Science Foundation programmes. One of the main objectives of these research programmes was the determination of the tectonic processes that went into the formation of the orogen. In this review paper we focus on the Late Paleozoic continent-continent collision that took place between Laurussia and Kazakhstania. Research in the Uralides was concentrated around two deep seismic profiles crossing the orogen. These were accompanied by geological, geophysical, geochronological, geochemical, and low-temperature thermochronological studies. The seismic profiles demonstrate that the Uralides has an overall bivergent structural architecture, but with significantly different reflectivity characteristics from one tectonic zone to another. The integration of other types of data sets with the seismic data allows us to interpret what tectonic processes where responsible for the formation of the structural architecture, and when they were active. On the basis of these data, we suggest that the changes in the crustal-scale structural architecture indicate that there was significant partitioning of tectonothermal conditions and deformation from zone to zone across major fault systems, and between the lower and upper crust. Also, a number of the structural features revealed in the bivergent architecture of the orogen formed either in the Neoproterozoic or in the Paleozoic, prior to continent-continent collision. From the end of continent-continent collision to the present, low-temperature thermochronology suggests that the evolution of the Uralides has been dominated by erosion and slow exhumation. Despite some evidence for more recent topographic uplift, it has so far proven difficult to quantify it.

The Bossoroca Complex, São Gabriel Terrane, Dom Feliciano Belt, southernmost Brazil: Usbnd Pb geochronology and tectonic implications for the neoproterozoic São Gabriel Arc

NASA Astrophysics Data System (ADS)

Gubert, Mauricio Lemos; Philipp, Ruy Paulo; Stipp Basei, Miguel Angelo

2016-10-01

Usbnd Pb LA-ICPMS geochronological analyses were carried out on zircon grains from metavolcanic rocks of the Bossoroca Complex and for one ash tuff of the Acampamento Velho Formation of the Camaquã Basin, in order to understand the evolution of the Neoproterozoic São Gabriel magmatic arc. A total of 42 analyses of igneous zircon grains were performed in three samples. The results yielded Usbnd Pb ages of 767.2 ± 2.9 Ma for the metavolcanic agglomerate (BOS-02); 765 ± 10 Ma for the metacrystal tuff (BOS-03) and 565.8 ± 4.8 Ma for the ash tuff (BOS-04). The Orogenic Cycle in Brazil is characterized by a set of orogenic belts consisting of petrotectonic associations juxtaposed by two collisional events that occurred at the end of the Neoproterozoic. In southern Brazil this orogeny formed the Dom Feliciano Belt, a unit composed of associations of rocks developed during two major orogenic events called São Gabriel (900-680 Ma) and Dom Feliciano (650-540 Ma). The main São Gabriel associations are tectonically juxtaposed as elongated strips according to the N20-30°E direction, bounded by ductile shear zones. The Bossoroca Complex comprises predominantly metavolcano-sedimentary rocks, characterized by medium-K calc-alkaline association generated in a cordillera-type magmatic arc. The volcanism occurred in sub-aerial environment, developing deposits generated by flow, resurgence and fall, sporadically interrupted by subaqueous epiclastic deposits, suggesting an arc related basin. The São Gabriel Terrane contains the petrotectonic units that represent the closure of the Charrua Ocean associated to the subduction period of the Brasiliano Orogenic Cycle in the Sul-rio-grandense Shield.

A Mesozoic orogenic cycle from post-collision to subduction in the southwestern Korean Peninsula: New structural, geochemical, and chronological evidence

NASA Astrophysics Data System (ADS)

Park, Seung-Ik; Kwon, Sanghoon; Kim, Sung Won; Hong, Paul S.; Santosh, M.

2018-05-01

The Early to Middle Mesozoic basins, distributed sporadically over the Korean Peninsula, preserve important records of the tectonic history of some of the major orogenic belts in East Asia. Here we present a comprehensive study of the structural, geochemical, geochronological, and paleontological features of a volcano-sedimentary package, belonging to the Oseosan Volcanic Complex of the Early to Middle Mesozoic Chungnam Basin, within the Mesozoic subduction-collision orogen in the southwestern Korean Peninsula. The zircon U-Pb data from rhyolitic volcanic rocks of the complex suggest Early to Middle Jurassic emplacement age of ca. 178-172 Ma, harmonious with plant fossil taxa found from the overlying tuffaceous sedimentary rock. The geochemical data for the rhyolitic volcanic rocks are indicative of volcanic arc setting, implying that the Chungnam Basin has experienced an intra-arc subsidence during the basin-expanding stage by subduction of the Paleo-Pacific (Izanagi) Plate. The Jurassic arc-related Oseosan Volcanic Complex was structurally stacked by the older Late Triassic to Early Jurassic post-collisional basin-fill of the Nampo Group by the Jangsan fault during basin inversion. The Late Jurassic to Early Cretaceous K-feldspar and illite K-Ar ages marked the timing of inversion tectonics, contemporaneous with the magmatic quiescence in the southern Korean Peninsula, likely due to flat-lying or low-angle subduction. The basin evolution history preserved in the Mesozoic Chungnam Basin reflects a Mesozoic orogenic cycle from post-collision to subduction in the southwestern Korean Peninsula. This, in turn, provides a better understanding of the spatial and temporal changes in Mesozoic tectonic environments along the East Asian continental margin.

Geophysical data reveal the crustal structure of the Alaska Range orogen within the aftershock zone of the Mw 7.9 Denali fault earthquake

USGS Publications Warehouse

Fisher, M.A.; Ratchkovski, N.A.; Nokleberg, W.J.; Pellerin, L.; Glen, J.M.G.

2004-01-01

Geophysical information, including deep-crustal seismic reflection, magnetotelluric (MT), gravity, and magnetic data, cross the aftershock zone of the 3 November 2002 Mw 7.9 Denali fault earthquake. These data and aftershock seismicity, jointly interpreted, reveal the crustal structure of the right-lateral-slip Denali fault and the eastern Alaska Range orogen, as well as the relationship between this structure and seismicity. North of the Denali fault, strong seismic reflections from within the Alaska Range orogen show features that dip as steeply as 25?? north and extend downward to depths between 20 and 25 km. These reflections reveal crustal structures, probably ductile shear zones, that most likely formed during the Late Cretaceous, but these structures appear to be inactive, having produced little seismicity during the past 20 years. Furthermore, seismic reflections mainly dip north, whereas alignments in aftershock hypocenters dip south. The Denali fault is nonreflective, but modeling of MT, gravity, and magnetic data suggests that the Denali fault dips steeply to vertically. However, in an alternative structural model, the Denali fault is defined by one of the reflection bands that dips to the north and flattens into the middle crust of the Alaska Range orogen. Modeling of MT data indicates a rock body, having low electrical resistivity (>10 ??-m), that lies mainly at depths greater than 10 km, directly beneath aftershocks of the Denali fault earthquake. The maximum depth of aftershocks along the Denali fault is 10 km. This shallow depth may arise from a higher-than-normal geothermal gradient. Alternatively, the low electrical resistivity of deep rocks along the Denali fault may be associated with fluids that have weakened the lower crust and helped determine the depth extent of the after-shock zone.

Cenozoic structural evolution, thermal history, and erosion of the Ukrainian Carpathians fold-thrust belt

NASA Astrophysics Data System (ADS)

Nakapelyukh, Mykhaylo; Bubniak, Ihor; Bubniak, Andriy; Jonckheere, Raymond; Ratschbacher, Lothar

2018-01-01

The Carpathians are part of the Alpine-Carpathian-Dinaridic orogen surrounding the Pannonian basin. Their Ukrainian part constitutes an ancient subduction-accretion complex that evolved into a foreland fold-thrust belt with a shortening history that was perpendicular to the orogenic strike. Herein, we constrain the evolution of the Ukrainian part of the Carpathian fold-thrust belt by apatite fission-track dating of sedimentary and volcanic samples and cross-section balancing and restoration. The apatite fission-track ages are uniform in the inner―southwestern part of the fold-thrust belt, implying post-shortening erosion since 12-10 Ma. The ages in the leading and trailing edges record provenance, i.e., sources in the Trans-European suture zone and the Inner Carpathians, respectively, and show that these parts of the fold-thrust were not heated to more than 100 °C. Syn-orogenic strata show sediment recycling: in the interior of the fold-thrust belt―the most thickened and most deeply eroded nappes―the apatite ages were reset, eroded, and redeposited in the syn-orogenic strata closer to the fore- and hinterland; the lag times are only a few million years. Two balanced cross sections, one constructed for this study and based on field and subsurface data, reveal an architecture characterized by nappe stacks separated by high-displacement thrusts; they record 340-390 km shortening. A kinematic forward model highlights the fold-thrust belt evolution from the pre-contractional configuration over the intermediate geometries during folding and thrusting and the post-shortening, erosional-unloading configuration at 12-10 Ma to the present-day geometry. Average shortening rates between 32-20 Ma and 20-12 Ma amounted to 13 and 21 km/Ma, respectively, implying a two-phased deformation of the Ukrainian fold-thrust belt.

Origin of the Bering Sea salient

USGS Publications Warehouse

Amato, J.M.; Toro, J.; Moore, Thomas E.

2004-01-01

Our investigations in Alaska and Russia show that the curved orogen of the Bering Strait region is a composite feature that formed as a result of multiple superimposed events and cannot be related to latest Cretaceous–early Tertiary east-west shortening. Relations interpreted to record east-west shortening include the Chukchi syntaxis, deformation on Seward and Chukotka Peninsulas, the map pattern of Triassic-Jurassic mafic rocks, and plate reconstructions. These relations are reviewed in light of new data and show that the curved orogen cannot have been formed by east-west shortening. For example, the Chukchi syntaxis, the northeastern limb of the orogen, is a primary structural loop that originated during the Brookian orogeny in the Early Cretaceous and therefore predates postulated oroclinal bending. East-west shortening on Seward Peninsula and Chukotka is manifest by low-amplitude, long-wavelength folds that require only small strains. The Seward Peninsula/Yukon-Koyukuk province boundary was previously interpreted as a thrust fault, but it instead may be a left-lateral strike-slip fault. Triassic-Jurassic mafic rocks similar to the Angayucham terrane are found on the northern Chukotka Peninsula, but a better correlation is with rocks farther south in the South Anyui suture zone, resulting in a less-arcuate pattern. Mid-Cretaceous north-south extension in the Bering Strait region has enhanced the curvature of the margin. Recent plate reconstructions indicate that shortening between Eurasia and North America was previously overestimated and that significant east-west convergence probably did not occur in the region during the Tertiary. We conclude that the curved orogen in the Bering Strait region is not a true orocline and instead is a composite structural feature that is best described as a salient.

Do supercontinents introvert or extrovert?: Sm-Nd isotope evidence

NASA Astrophysics Data System (ADS)

Brendan Murphy, J.; Damian Nance, R.

2003-10-01

In recent years, two end-member models for the formation of supercontinents have emerged. In the classical Wilson cycle, oceanic crust generated during supercontinent breakup (the interior ocean) is consumed during subsequent amalgamation so that the supercontinent turns “inside in” (introversion). Alternatively, following supercontinent breakup, the exterior margins of the dispersing continental fragments collide during reassembly so that the supercontinent turns “outside in” (extroversion). These end-member models can be distinguished by comparing the Sm-Nd crust-formation ages of accreted mafic complexes (e.g., ophiolites) in the collisional orogens formed during supercontinent assembly with the breakup age of the previous supercontinent. For supercontinents generated by introversion, these crust-formation ages postdate rifting of the previous supercontinent. For supercontinents generated by extroversion, the oceanic lithosphere consumed during reassembly predates breakup of the previous supercontinent, so that crust-formation ages of accreted mafic complexes are older than the age of rifting. In the Paleozoic Appalachian-Caledonide-Variscan orogen, a key collisional orogen in the assembly of Pangea, crust-formation ages of accretionary mafic complexes postdate the formation of the Iapetus Ocean (i.e., are younger than ca. 0.6 Ga), suggesting supercontinent reassembly by introversion. By contrast, the Neoproterozoic East African and Brasiliano orogens, which formed during the amalgamation of Gondwana, are characterized by mafic complexes with crust-formation ages (ca. 0.75 1.2 Ga) that predate the ca. 750 Ma breakup of Rodinia. Hence, these complexes must have formed from lithosphere in the exterior ocean that surrounded Rodinia, implying that this ocean was consumed during the amalgamation of Gondwana. These data indicate that Pangea and Gondwana were formed by introversion and extroversion, respectively, implying that supercontinents can be assembled by fundamentally distinct geodynamic processes.

Modeling the Evolution of Localized Strain in Orogenic Wedges: From Short-term Deformation to Long-term Tectonic States

NASA Astrophysics Data System (ADS)

Weiss, J. R.; Ito, G.; Brooks, B. A.; Olive, J. A. L.; Foster, J. H.; Howell, S. M.

2015-12-01

Some of the most destructive earthquakes on Earth are associated with active orogenic wedges. Despite a sound understanding of the basic mechanics that govern whole wedge structure over geologic time scales and a growing body of studies that have characterized the deformation associated with historic to recent earthquakes, first order questions remain about the linkage of the two sets of processes at the intermediate seismotectonic timescales. Numerical models have the power to test the effects of specific mechanical conditions on the evolution of observables at active orogenic wedges. Here we use a two-dimensional, continuum mechanics-based, finite difference method with a visco-elasto-plastic rheology coupled with surface processes to investigate the spatiotemporal distribution of deformation during wedge growth. The model simulates the contraction of a crustal layer overlying a weak base (décollement) against a rigid backstop and the spontaneous nucleation and evolution of fault zones due to cohesive, Mohr-Coulomb failure with strain weakening. Consistent with critical wedge theory, the average slope across the wedge is controlled by the relative frictional strengths of the wedge and décollement. Initial calculations predict changes in wedge deformation on short geologic timescales (103-105yrs) that involve episodes of widening as new, foreland-verging thrusts nucleate near the surface beyond the wedge toe and propagate down-dip to intersect the décollement. All the while, the wedge thickens via slip on older, internal fault zones. The aim of this study is to identify the parameters controlling the timescales of 1) episodic widening versus thickening and 2) nucleation and life-span of individual fault zones. These are initial steps needed to link earthquake observations to the long-term tectonic states inferred at various orogenic belts around the world.

Magnetic fabric in granitoid plutons emplaced during Variscan orogeny and timing of their intrusions: Eastern Variscan front

NASA Astrophysics Data System (ADS)

Hrouda, F.; Schulmann, K.; Chlupacova, M.; Aichler, J.; Mixa, P.; Pecina, V.; Zacek, V.; Kroener, A.

2003-04-01

The eastern Variscan front at the Czech and Polish border is characterised by oblique underthrusting of Neo-Proterozoic continental margin below thickened crustal root. The underthrust plate is subsequently imbricated and forms obliquely convergent crustal wedge which was further thrust over the foreland. Several granitic plutons of arc geochemical affinity are intruded during different stages of crustal thickening and exhumation. Analysis of anisotropy of magnetic susceptibility was carried out to study the relationships between host rock deformation and magma emplacement fabrics in different crustal levels and geographical positions with respect to crustal wedge and westerly orogenic root. Deep seated granodiorite sheets (Javornik intrusion 348 Ma, and Stare Mesto sill 340 Ma) are emplaced in the deepest and more internal high grade parts of the orogen along the margin of thickened crustal root. They show AMS fabrics entirely concordant with surrounding high grade gneisses and were emplaced during contractional (transpressive) regime.The Sumperk granodiorite is a more shallow intrusion emplaced in the central part of the crustal wedge. This sheet-like intrusion shows its AMS fabrics conformable to transpressional fabrics of surrounding mylonitised barovian schists and gneisses. The Zulova Pluton 330 Ma, representing the shallowest intrusion, intrudes the most external part of the crustal wedge. It shows the magnetic fabrics virtually perpendicular to compressional structures in the neighbouring areas. In addition, these fabrics are clearly concordant with large-scale detachment zone along which the Devonian meta-sedimentary cover slided to the west. The AMS fabrics of granitoids thus testify the progressive oblique convergence prograding to the east followed by collapse of external part of orogenic wedge. The AMS fabric data allow us to evaluate the mechanical role of arc magmas syntectonically emplaced during oblique convergence and finally during normal shearing perpendicular to the orogen.

Mid-Pleistocene climate transition drives net mass loss from rapidly uplifting St. Elias Mountains, Alaska

PubMed Central

Jaeger, John M.; Mix, Alan C.; Asahi, Hirofumi; Bahlburg, Heinrich; Belanger, Christina L.; Berbel, Glaucia B. B.; Childress, Laurel; Cowan, Ellen; Drab, Laureen; Forwick, Matthias; Fukumura, Akemi; Ge, Shulan; Gupta, Shyam; Konno, Susumu; LeVay, Leah J.; März, Christian; McClymont, Erin L.; Moy, Chris; Müller, Juliane; Nakamura, Atsunori; Ojima, Takanori; Ribeiro, Fabiana R.; Ridgway, Kenneth D.; Romero, Oscar E.; Slagle, Angela L.; Stoner, Joseph S.; St-Onge, Guillaume; Suto, Itsuki; Walczak, Maureen D.; Worthington, Lindsay L.; Bailey, Ian; Enkelmann, Eva; Reece, Robert; Swartz, John M.

2015-01-01

Erosion, sediment production, and routing on a tectonically active continental margin reflect both tectonic and climatic processes; partitioning the relative importance of these processes remains controversial. Gulf of Alaska contains a preserved sedimentary record of the Yakutat Terrane collision with North America. Because tectonic convergence in the coastal St. Elias orogen has been roughly constant for 6 My, variations in its eroded sediments preserved in the offshore Surveyor Fan constrain a budget of tectonic material influx, erosion, and sediment output. Seismically imaged sediment volumes calibrated with chronologies derived from Integrated Ocean Drilling Program boreholes show that erosion accelerated in response to Northern Hemisphere glacial intensification (∼2.7 Ma) and that the 900-km-long Surveyor Channel inception appears to correlate with this event. However, tectonic influx exceeded integrated sediment efflux over the interval 2.8–1.2 Ma. Volumetric erosion accelerated following the onset of quasi-periodic (∼100-ky) glacial cycles in the mid-Pleistocene climate transition (1.2–0.7 Ma). Since then, erosion and transport of material out of the orogen has outpaced tectonic influx by 50–80%. Such a rapid net mass loss explains apparent increases in exhumation rates inferred onshore from exposure dates and mapped out-of-sequence fault patterns. The 1.2-My mass budget imbalance must relax back toward equilibrium in balance with tectonic influx over the timescale of orogenic wedge response (millions of years). The St. Elias Range provides a key example of how active orogenic systems respond to transient mass fluxes, and of the possible influence of climate-driven erosive processes that diverge from equilibrium on the million-year scale. PMID:26598689