Kinematic geometry of osteotomies.
Smith, Erin J; Bryant, J Tim; Ellis, Randy E
2005-01-01
This paper presents a novel method for defining an osteotomy that can be used to represent all types of osteotomy procedures. In essence, we model an osteotomy as a lower-pair mechanical joint to derive the kinematic geometry of the osteotomy. This method was implemented using a commercially available animation software suite in order to simulate a variety of osteotomy procedures. Two osteotomy procedures are presented for a femoral malunion in order to demonstrate the advantages of our kinematic model in developing optimal osteotomy plans. The benefits of this kinematic model include the ability to evaluate the effects of various kinds of osteotomy and the elimination of potentially error-prone radiographic assessment of deformities.
Deenik, Axel; van Mameren, Henk; de Visser, Enrico; de Waal Malefijt, Maarten; Draijer, Frits; de Bie, Rob
2008-12-01
Chevron osteotomy is a widely accepted osteotomy for correction of hallux valgus.(18) Algorithms were developed to overcome the limitations of distal osteotomies. Scarf osteotomy has become popular as a versatile procedure that should be able to correct most cases of acquired hallux valgus. The purpose of this study was to evaluate whether patients with moderate or severe hallux valgus have better correction with a scarf osteotomy as compared to chevron osteotomy. After informed consent, 136 feet in 115 patients were randomized to 66 scarf and 70 chevron osteotomies. Deformities of patients were classified as mild, moderate and severe according to IMA, and both groups were compared with independent t-tests. The results were measured using radiographic HVA, IMA and DMAA measurements. There were no statistical differences in HVA, IMA and DMAA between scarf and chevron osteotomy in mild to moderate hallux valgus. In severe hallux valgus, chevron osteotomy corrected HVA better than scarf osteotomy, although this group consisted of twelve patients only. Five patients in the chevron group and seven in the scarf group developed recurrent subluxation of the metatarsophalangeal joint. In patients with moderate and severe hallux valgus, the results of chevron osteotomy were at least as effective as a scarf osteotomy. Recurrent subluxation of the first metatatarsophalangeal joint was the main cause for insufficient correction. We favor the chevron osteotomy because it is less invasive, without sacrificing correction of HVA and IMA.
Novel TPLO Alignment Jig/Saw Guide Reproduces Freehand and Ideal Osteotomy Positions
2016-01-01
Objectives To evaluate the ability of an alignment jig/saw guide to reproduce appropriate osteotomy positions in the tibial plateau leveling osteotomy (TPLO) in the dog. Methods Lateral radiographs of 65 clinical TPLO procedures using an alignment jig and freehand osteotomy performed by experienced TPLO surgeons using a 24 mm radial saw blade between Dec 2005–Dec 2007 and Nov 2013–Nov 2015 were reviewed. The freehand osteotomy position was compared to potential osteotomy positions using the alignment jig/saw guide. The proximal and distal jig pin holes on postoperative radiographs were used to align the jig to the bone; saw guide position was selected to most closely match the osteotomy performed. The guide-to-osteotomy fit was categorized by the distance between the actual osteotomy and proposed saw guide osteotomy at its greatest offset (≤1 mm = excellent; ≤2 mm = good; ≤3 mm = satisfactory; >3 mm = poor). Results Sixty-four of 65 TPLO osteotomies could be matched satisfactorily by the saw guide. Proximal jig pin placement 3–4 mm from the joint surface and pin location in a craniocaudal plane on the proximal tibia were significantly associated with the guide-to-osteotomy fit (P = 0.021 and P = 0.047, respectively). Clinical Significance The alignment jig/saw guide can be used to reproduce appropriate freehand osteotomy position for TPLO. Furthermore, an ideal osteotomy position centered on the tibial intercondylar tubercles also is possible. Accurate placement of the proximal jig pin is a crucial step for correct positioning of the saw guide in either instance. PMID:27556230
Novel TPLO Alignment Jig/Saw Guide Reproduces Freehand and Ideal Osteotomy Positions.
Mariano, Abigail D; Kowaleski, Michael P; Boudrieau, Randy J
2016-01-01
To evaluate the ability of an alignment jig/saw guide to reproduce appropriate osteotomy positions in the tibial plateau leveling osteotomy (TPLO) in the dog. Lateral radiographs of 65 clinical TPLO procedures using an alignment jig and freehand osteotomy performed by experienced TPLO surgeons using a 24 mm radial saw blade between Dec 2005-Dec 2007 and Nov 2013-Nov 2015 were reviewed. The freehand osteotomy position was compared to potential osteotomy positions using the alignment jig/saw guide. The proximal and distal jig pin holes on postoperative radiographs were used to align the jig to the bone; saw guide position was selected to most closely match the osteotomy performed. The guide-to-osteotomy fit was categorized by the distance between the actual osteotomy and proposed saw guide osteotomy at its greatest offset (≤1 mm = excellent; ≤2 mm = good; ≤3 mm = satisfactory; >3 mm = poor). Sixty-four of 65 TPLO osteotomies could be matched satisfactorily by the saw guide. Proximal jig pin placement 3-4 mm from the joint surface and pin location in a craniocaudal plane on the proximal tibia were significantly associated with the guide-to-osteotomy fit (P = 0.021 and P = 0.047, respectively). The alignment jig/saw guide can be used to reproduce appropriate freehand osteotomy position for TPLO. Furthermore, an ideal osteotomy position centered on the tibial intercondylar tubercles also is possible. Accurate placement of the proximal jig pin is a crucial step for correct positioning of the saw guide in either instance.
Liu, Chao; Yu, Wen; Zheng, Guoquan; Guo, Yue; Song, Kai; Tang, Xiangyu; Wang, Zheng; Wang, Yan; Zhang, Yonggang
2017-08-01
This is a retrospective clinical study. To investigate the correction angle and safety of the spinal osteotomy at the T12 or L1 vertebra. Monosegment subtraction osteotomy cannot effectively correct severe kyphosis in ankylosing spondylitis (AS), generally 2-level spinal osteotomy was taken for achieving expected correction. According to literature, the T12 or L1 were usually taken as the upper spinal osteotomy vertebra. Because of the canalis vertebralis at the T12 and L1 were spinal cord and medullary cone, so the spinal osteotomy at the T12 or L1 vertebra were more dangerous than at lower level. The correction angle and safety of the spinal osteotomy at the T12 or L1 vertebra have not yet been reported. From July 2009 to 2014, 33 patients in our department with severe AS kyphosis underwent 2-level pedicle subtraction osteotomy were studied. Preoperative and postoperative relevant parameters and complications were recorded. The upper spinal osteotomy was taken at the T12 vertebra for 10 patients. The upper spinal osteotomy was taken at the L1 vertebra for 23 patients. The mean amount of correction of T12 and L1 was 26.230 and 27.952 degrees, respectively. All patients could walk with orthophoria and lie horizontally postoperatively. No deadly vascular and neurological lesion occurred. Performing pedicle subtraction osteotomy at T12 and L1 can safely achieve a mean correction of 26.230 and 27.952 degrees, respectively. Two-level osteotomy was safely and advocated for correcting severe AS kyphosis. Level III.
Glazebrook, Mark; Copithorne, Peter; Boyd, Gordon; Daniels, Timothy; Lalonde, Karl-André; Francis, Patricia; Hickey, Michael
2014-10-01
Hallux valgus with an increased intermetatarsal angle is usually treated with a proximal metatarsal osteotomy. The proximal chevron osteotomy is commonly used but is technically difficult. This study compares the proximal opening wedge osteotomy of the first metatarsal with the proximal chevron osteotomy for the treatment of hallux valgus with an increased intermetatarsal angle. This prospective, randomized multicenter (three-center) study was based on the clinical outcome scores of the Short Form-36, the American Orthopaedic Foot & Ankle Society forefoot questionnaire, and the visual analog scale for pain, activity, and patient satisfaction. Subjects were assessed prior to surgery and at three, six, and twelve months postoperatively. Surgeon preference was evaluated based on questionnaires and the operative times required for each procedure. No significant differences were found for any of the patients' clinical outcome measurements between the two procedures. The proximal opening wedge osteotomy was found to lengthen, and the proximal chevron osteotomy was found to shorten, the first metatarsal. The intermetatarsal angles improved (decreased) significantly, from 14.8° ± 3.2° to 9.1° ± 2.9 (mean and standard deviation) after a proximal opening wedge osteotomy and from 14.6° ± 3.9° to 11.3° ± 4.0° after a proximal chevron osteotomy (p < 0.05 for both). Operative time required for performing a proximal opening wedge osteotomy is similar to that required for performing a proximal chevron osteotomy (mean and standard deviation, 67.1 ± 16.5 minutes compared with 69.9 ± 18.6 minutes; p = 0.510). Opening wedge and proximal chevron osteotomies have comparable radiographic outcomes and comparable clinical outcomes for pain, satisfaction, and function. The proximal opening wedge osteotomy lengthens, and the proximal chevron osteotomy shortens, the first metatarsal. The proximal opening wedge osteotomy was subjectively less technically demanding and was preferred by the orthopaedic surgeons in this study. Therapeutic Level I. See Instructions for Authors for a complete description of levels of evidence. Copyright © 2014 by The Journal of Bone and Joint Surgery, Incorporated.
[Distal osteotomy for the treatment of hallux valgus (Chevron osteotomy)].
Stukenborg-Colsman, C; Claaßen, L; Ettinger, S; Yao, D; Lerch, M; Plaaß, C
2017-05-01
Distal osteotomies, like the Chevron osteotomy, is indicated for mild to moderate hallux valgus deformities. Splayfoot, painful pseudoexostosis, and transfer metatasalgia are observed in the clinical examination. Radiographic examination should be done with weight bearing in two planes. Preoperatively the intermetatarsal (IM), hallux valgus, and distal metatarsal articular (DMAA) angles should be measured. The operative technique is based on soft tissue and bony correction. Modifications of the osteotomy allow a shortening, lengthening, or neutral correction of the first metatarsal. With a modified Chevron osteotomy, an increased DMAA can be also corrected.
A review of the physiological and histological effects of laser osteotomy.
Rajitha Gunaratne, G D; Khan, Riaz; Fick, Daniel; Robertson, Brett; Dahotre, Narendra; Ironside, Charlie
2017-01-01
Osteotomy is the surgical cutting of bone. Some obstacles to laser osteotomy have been melting, carbonisation and subsequent delayed healing. New cooled scanning techniques have resulted in effective bone cuts without the strong thermal side effects, which were observed by inappropriate irradiation techniques with continuous wave and long pulsed lasers. With these new techniques, osteotomy gaps histologically healed with new bone formation without any noticeable or minimum thermal damage. No significant cellular differences in bone healing between laser and mechanical osteotomies were noticed. Some studies even suggest that the healing rate may be enhanced following laser osteotomy compared to conventional mechanical osteotomy. Additional research is necessary to evaluate different laser types with appropriate laser setting variables to increase ablation rates, with control of depth, change in bone type and damage to adjacent soft tissue. Laser osteotomy has the potential to become incorporated into the armamentarium of bone surgery.
Spinal pedicle subtraction osteotomy for fixed sagittal imbalance patients
Hyun, Seung-Jae; Kim, Yongjung J; Rhim, Seung-Chul
2013-01-01
In addressing spinal sagittal imbalance through a posterior approach, the surgeon now may choose from among a variety of osteotomy techniques. Posterior column osteotomies such as the facetectomy or Ponte or Smith-Petersen osteotomy provide the least correction, but can be used at multiple levels with minimal blood loss and a lower operative risk. Pedicle subtraction osteotomies provide nearly 3 times the per-level correction of Ponte/Smith-Petersen osteotomies; however, they carry increased technical demands, longer operative time, and greater blood loss and associated significant morbidity, including neurological injury. The literature focusing on pedicle subtraction osteotomy for fixed sagittal imbalance patients is reviewed. The long-term overall outcomes, surgical tips to reduce the complications and suggestions for their proper application are also provided. PMID:24340276
Tong, Kuang; Zhang, Yuanzhi; Zhang, Sheng; Yu, Bin
2013-06-01
To provide an accurate method for osteotomy in the treatment of developmental dysplasia of the hip with steel osteotomy by three-dimensional reconstruction and Reverse Engineering technique. Between January 2011 and December 2012, 13 children with developmental dysplasia of the hip underwent steel osteotomy. 3D CT scan pelvic images were obtained and transferred via a DICOM network into a computer workstation to construct 3D models of the hip using Materialise Mimics 14.1 software in STL format. These models were imported into Imageware 12.0 software for steel osteotomy simulation until a stable hip was attained in the anatomical position for dislocation or subluxation of the hip in older children. The osteotomy navigational templates were designed according to the anatomical features after a stable hip was reconstructed. These navigational templates were manufactured using a rapid prototyping technique. The reconstruction hips in these children show good matching property and acetabulum cover. The computer-aided design of osteotomy template provides personalized and accurate solutions in the treatment of developmental dysplasia of the hip with steel osteotomy in older children.
Metatarsal Osteotomies: Complications.
Reddy, Veerabhadra Babu
2018-03-01
Metatarsal osteotomies can be divided into proximal and distal. The proximal osteotomies, such as the oblique, segmental, set cut, and Barouk-Rippstein-Toullec (BRT) osteotomy, all provide the ability to significantly change the position of the metatarsal head without violating the joint. These osteotomies, however, have a high rate of nonunion when done without internal fixation and can lead to transfer metatarsalgia when done without regard to the parabola of metatarsal head position. Distal osteotomies such as the Weil and Helal offer superior healing but have an increased incidence of recurrent metatarsalgia, joint stiffness, and floating toe. Copyright © 2017 Elsevier Inc. All rights reserved.
Kawase-Koga, Yoko; Mori, Yoshiyuki; Kanno, Yuki; Hoshi, Kazuto; Takato, Tsuyoshi
2015-10-01
Short lingual osteotomy is a useful method for the performance of sagittal split ramus osteotomy involving interference between the proximal and distal bone fragments when lateral differences exist in the setback distance. However, this procedure occasionally results in abnormal fracture and nerve injury; expert surgical skill is thus required. We herein describe a novel technique involving the use of an ultrasonic bone-cutting device (Piezosurgery; Mectron Medical Technology, Carasco, Italy) for vertical osteotomy posterior to the mandibular foramen. Successful short lingual osteotomy was performed using this technique with avoidance of abnormal fracture and neurovascular bundle damage.
Relative strength of tailor's bunion osteotomies and fixation techniques.
Haddon, Todd B; LaPointe, Stephan J
2013-01-01
A paucity of data is available on the mechanical strength of fifth metatarsal osteotomies. The present study was designed to provide that information. Five osteotomies were mechanically tested to failure using a materials testing machine and compared with an intact fifth metatarsal using a hollow saw bone model with a sample size of 10 for each construct. The osteotomies tested were the distal reverse chevron fixated with a Kirschner wire, the long plantar reverse chevron osteotomy fixated with 2 screws, a mid-diaphyseal sagittal plane osteotomy fixated with 2 screws, the mid-diaphyseal sagittal plane osteotomy fixated with 2 screws, and an additional cerclage wire and a transverse closing wedge osteotomy fixated with a box wire technique. Analysis of variance was performed, resulting in a statistically significant difference among the data at p <.0001. The Tukey-Kramer honestly significant difference with least significant differences was performed post hoc to separate out the pairs at a minimum α of 0.05. The chevron was statistically the strongest construct at 130 N, followed by the long plantar osteotomy at 78 N. The chevron compared well with the control at 114 N, and they both fractured at the proximal model to fixture interface. The other osteotomies were statistically and significantly weaker than both the chevron and the long plantar constructs, with no statistically significant difference among them at 36, 39, and 48 N. In conclusion, the chevron osteotomy was superior in strength to the sagittal and transverse plane osteotomies and similar in strength and failure to the intact model. Copyright © 2013 American College of Foot and Ankle Surgeons. Published by Elsevier Inc. All rights reserved.
Kwun, Jun-Dae; Kim, Hee-June; Park, Jaeyoung; Park, Il-Hyung; Kyung, Hee-Soo
2017-01-01
The purpose of this study was to evaluate the usefulness of three-dimensional (3D) printed models for open wedge high tibial osteotomy (HTO) in porcine bone. Computed tomography (CT) images were obtained from 10 porcine knees and 3D imaging was planned using the 3D-Slicer program. The osteotomy line was drawn from the three centimeters below the medial tibial plateau to the proximal end of the fibular head. Then the osteotomy gap was opened until the mechanical axis line was 62.5% from the medial border along the width of the tibial plateau, maintaining the posterior tibial slope angle. The wedge-shaped 3D-printed model was designed with the measured angle and osteotomy section and was produced by the 3D printer. The open wedge HTO surgery was reproduced in porcine bone using the 3D-printed model and the osteotomy site was fixed with a plate. Accuracy of osteotomy and posterior tibial slope was evaluated after the osteotomy. The mean mechanical axis line on the tibial plateau was 61.8±1.5% from the medial tibia. There was no statistically significant difference (P=0.160). The planned and post-osteotomy correction wedge angles were 11.5±3.2° and 11.4±3.3°, and the posterior tibial slope angle was 11.2±2.2° pre-osteotomy and 11.4±2.5° post-osteotomy. There were no significant differences (P=0.854 and P=0.429, respectively). This study showed that good results could be obtained in high tibial osteotomy by using 3D printed models of porcine legs. Copyright © 2016 Elsevier B.V. All rights reserved.
Sports activities after lower limb osteotomy.
Gougoulias, Nikolaos; Khanna, Anil; Maffulli, Nicola
2009-01-01
Active sports participation can be important in some patients with degenerative joint disease in the lower limb. We investigated whether this is possible after an osteotomy for osteoarthritis of the hip, knee and ankle joints. We performed a literature search using Medline, Cochrane, CINAHL and Google Scholar with no restriction to time period or language using the keywords: 'osteotomy and sports'. Eleven studies (all level IV evidence) satisfied our inclusion and exclusion criteria. Nine reported on high tibial osteotomies, one on periacetabular osteotomies and one on distal tibial osteotomies. The Coleman Methodology Score to assess the quality of studies showed much heterogeneity in terms of study design, patient characteristics, management methods and outcome assessment. Participation in recreational sports is possible in most patients who were active in sports before lower limb osteotomy. In no study were patients able to participate in competitive sports. Intensive participation in sports after osteotomy may adversely affect outcome and lead to failures requiring re-operation. Patients may be able to remain active in selected sports activities after a lower limb osteotomy for osteoarthritis. More rapid progression of arthritis is however a possibility. Prospective comparative studies investigating activities and sports participation in age-matched patients undergoing osteotomy or joint replacement could lead to useful conclusions. Increased activity and active sports participation may lead to progression of arthritis and earlier failure requiring additional surgery.
Results of step-cut medial malleolar osteotomy.
Thordarson, David B; Kaku, Shawn K
2006-12-01
Treatment of certain complex ankle pathology, such as a talar body fracture or osteochondral lesion requiring grafting, can necessitate medial malleolar osteotomy for adequate operative exposure. This paper evaluates the step-cut medial malleolar osteotomy for exposure of the ankle joint. Fourteen patients with intra-articular pathology, including talar body fractures or osteochondral lesions necessitating extensive intra-articular exposure had step-cut malleolar osteotomy. The average age of the patients was 37 (range 20-90) years, and the average followup was 8 months. All 14 patients had an uncomplicated intraoperative course, with excellent exposure of the ankle joint. All patients had prompt healing of the osteotomy by 6 weeks after surgery without loss of reduction. None of the patients had pain at the osteotomy site. Step-cut medial malleolar osteotomy is an excellent, reproducible method for extensive exposure of the talar dome.
Schneider, Adrian K; Pierrepont, Jim W; Hawdon, Gabrielle; McMahon, Stephen
2018-04-01
Patient specific guides can be a valuable tool in improving the precision of planned femoral neck osteotomies, especially in minimally invasive hip surgery, where bony landmarks are often inaccessible. The aim of our study was to validate the accuracy of a novel patient specific femoral osteotomy guide for THR through a minimally invasive posterior approach, the direct superior approach (DSA). As part of our routine preoperative planning 30 patients underwent low dose CT scans of their arthritic hip. 3D printed patient specific femoral neck osteotomy guides were then produced. Intraoperatively, having cleared all soft tissue from the postero-lateral neck of the enlocated hip, the guide was placed and pinned onto the posterolateral femoral neck. The osteotomy was performed using an oscillating saw and the uncemented hip components were implanted as per routine. Postoperatively, the achieved level of the osteotomy at the medial calcar was compared with the planned level of resection using a 3D/2D matching analysis (Mimics X-ray module, Materialise, Belgium). A total of 30 patients undergoing uncemented Trinity™ acetabular and TriFit TS™ femoral component arthroplasty (Corin, UK) were included in our analysis. All but one of our analysed osteotomies were found to be within 3 mm from the planned height of osteotomy. In one patient the level of osteotomy deviated 5 mm below the planned level of resection. Preoperative planning and the use of patient specific osteotomy guides provides an accurate method of performing femoral neck osteotomies in minimally invasive hip arthroplasty using the direct superior approach. IV (Case series).
Bekić, Marijo; Davila, Slavko; Hrskanović, Mato; Bekić, Marijana; Seiwerth, Sven; Erdeljić, Viktorija; Capak, Darko; Butković, Vladimir
2008-12-01
Previous studies have shown substantial effect thermal damage can have on new bone formation following osteotomy. In this study we evaluated the extent of thermal damage which occurs in four different methods of osteotomy and the effects it can have on bone healing. We further wanted to test whether a special osteotomy plate we constructed can lead to diminished heat generation during osteotomy and enhanced bone healing. The four methods evaluated included osteotomy performed by chisel, a newly constructed osteotomy plate, Gigly and oscillating saw. Twelve adult sheep underwent osteotomy performed on both tibiae. Bone fragments were stabilized using a fixation plate. Callus size was assessed using standard radiographs. Densitometry and histological evaluation were performed at 8 weeks following osteotomy. Temperature measurements were performed both in vivo during the operation, and ex vivo on explanted tibiae. The defects healed without complications and showed typical course of secondary fracture healing with callus ingrowth into the osteotomy gap. Radiographic examination of bone healing showed a tendency towards more callus formation in bones osteotomized using Gigly and oscillating saw, but this difference lacked significance. Use of Gigly and oscillating saw elicited much higher temperatures at the bone cortex surface, which subsequently lead to slightly impaired bone healing according to histological analysis. BMD was equal among all bones. In conclusion, the time required for complete healing of the defect differed depended greatly on the instruments used. The newly constructed osteotomy plate showed best results based on histological findings of capillary and osteoblast density.
The use of sternal wedge osteotomy in pectus surgery: when is it necessary?
Kara, Murat; Gundogdu, Ahmet Gokhan; Kadioglu, Salih Zeki; Cayirci, Ertug Can; Taskin, Necati
2016-09-01
The Ravitch procedure is a well-established surgical procedure for correction of chest wall deformities. Sternal wedge osteotomy is an important part of this procedure. We studied the incidence of wedge osteotomy with respect to the type of chest wall deformity in patients undergoing surgical correction with the use of a recently developed chest wall stabilization system. A total of 47 patients, 39 (83%) male and 8 (17%) female with a mean age of 14.9 ± 2.1 years, underwent the Ravitch procedure. Twenty-four (51.1%) had pectus carinatum, 19 (40.4%) had pectus excavatum, and 4 (8.5%) had pectus arcuatum. A conventional or oblique sternal wedge osteotomy was performed as indicated, followed by chest wall stabilization using the MedXpert system. Of the 47 patients, 27 (57.4%) had a sternal wedge osteotomy. All cases of pectus arcuatum and redo cases underwent sternal wedge osteotomy. Pectus excavatum cases tended to have a greater incidence of wedge osteotomy compared to pectus carinatum cases (68.4% vs. 41.7%, p = 0.052). Patients with more resected ribs had a greater rate of wedge osteotomy (63.4%) compared to those with fewer resected ribs (16.7%, p = 0.043). A sternal wedge osteotomy is more commonly performed in patients with pectus excavatum compared to those with pectus carinatum. All redo and pectus arcuatum cases need a wedge osteotomy for proper correction. Wedge osteotomy is very likely in more aggressive corrections with more rib resections. © The Author(s) 2016.
Hou, Min; Shi, Guang-Yu; Pu, Li-Chen; Song, Da-Li; Zhang, Xi-Zhong; Liu, Chun-Ming
2009-09-01
To investigate the biomechanical changes of internal midface distraction after different types of maxillary osteotomy in patients with cleft lip and palate (CLP). 3-D finite element (FEM) analysis was used. 3-D models of Le Fort I, II, III osteotomy and soft tissue were established. Based on the new pattern of internal midface distractor, the distraction of maxillary complex was simulated to advance 10 mm anteriorly. The mechanical change was studied. The maxillary complex in CLP were advanced after distraction. Constriction of alveolar crest and palate occurred in Le Fort I osteotomy, but not in Le Fort II and III osteotomy. The maxillary complex was moved anteriorly en bloc after Le Fort III osteotomy, but some degree of rotation of maxillary complex was observed during the distraction after Le Fort I and II osteotomy. In vertical direction, the maxillary complex had more counterclockwise rotation after Le Fort II osteotomy. 3-D FEM analysis can be used for the study of internal distraction. It can reflect the maxillary movement and provide the theory basis for preoperative design.
A comparison of piezosurgery with conventional techniques for internal osteotomy.
Koçak, I; Doğan, R; Gökler, O
2017-06-01
To compare conventional osteotomy with the piezosurgery medical device, in terms of postoperative edema, ecchymosis, pain, operation time, and mucosal integrity, in rhinoplasty patients. In this prospective study, 49 rhinoplasty patients were randomly divided into two groups according to osteotomy technique used, either conventional osteotomy or piezosurgery. For all patients, the total duration of the operation was recorded, and photographs were taken and scored for ecchymosis and edema on postoperative days 2, 4, and 7. In addition, pain level was evaluated on postoperative day 2, and mucosal integrity was assessed on day 4. All scoring and evaluation was conducted by a physician who was blinded to the osteotomy procedure. In the piezosurgery group, edema scores on postoperative day 2 and ecchymosis scores on postoperative days 2, 4, and 7 were significantly lower than in the conventional osteotomy group (p < 0.05). On postoperative day 2, the pain level was lower in the piezosurgery group than in the conventional osteotomy group (p < 0.05). In an endoscopic examination on postoperative day 4, while 24% of the patients in the conventional osteotomy group had mucosal damage, no such damage was observed in the piezosurgery group. When total operation duration was compared, there was no significant difference between the groups (p > 0.05). Piezosurgery is a safe osteotomy method, with less edema (in the early postoperative period) and ecchymosis compared with conventional osteotomy, as well as less pain, a similar operation duration, and no mucosal damage.
Intraosseous heat generation during sonic, ultrasonic and conventional osteotomy.
Rashad, Ashkan; Sadr-Eshkevari, Pooyan; Heiland, Max; Smeets, Ralf; Hanken, Henning; Gröbe, Alexander; Assaf, Alexandre T; Köhnke, Robert H; Mehryar, Pouyan; Riecke, Björn; Wikner, Johannes
2015-09-01
To assess heat generation in osteotomies during application of sonic and ultrasonic saws compared to conventional bur. Two glass-fiber isolated nickel-chromium thermocouples, connected to a recording device, were inserted into fresh bovine rib bone blocks and kept in 20 ± 0.5 °C water at determined depths of 1.5 mm (cortical layer) and 7 mm (cancellous layer) and 1.0 mm away from the planned osteotomy site. Handpieces, angulated 24-32°, were mounted in a vertical drill stand, and standardized weights were attached to their tops to exert loads of 5, 8, 15 and 20 N. Irrigation volumes of 20, 50 and 80 ml/min were used for each load. Ten repetitions were conducted using new tips each time for each test condition. The Mann-Whitney-U test was used for statistical analysis (p < 0.05). Both ultrasonic and sonic osteotomies were associated with significantly lower heat generation than conventional osteotomy (p < 0.01). Sonic osteotomy showed non-significantly lower heat generation than ultrasonic osteotomy. Generated heat never exceeded the critical limit of 47 °C in any system. Variation of load had no effect on heat generation in both bone layers for all tested systems. An increased irrigation volume resulted in lower temperatures in both cortical and cancellous bone layers during all tested osteotomies. Although none of the systems under the conditions of the present study resulted in critical heat generation, the application of ultrasonic and sonic osteotomy systems was associated with lower heat generation compared to the conventional saw osteotomy. Copious irrigation seems to play a critical role in preventing heat generation in the osteotomy site. Copyright © 2015 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.
Schmid, Timo; Zurbriggen, Sebastian; Zderic, Ivan; Gueorguiev, Boyko; Weber, Martin; Krause, Fabian G
2013-09-01
A fixed cavovarus foot deformity can be associated with anteromedial ankle arthrosis due to elevated medial joint contact stresses. Supramalleolar valgus osteotomies (SMOT) and lateralizing calcaneal osteotomies (LCOT) are commonly used to treat symptoms by redistributing joint contact forces. In a cavovarus model, the effects of SMOT and LCOT on the lateralization of the center of force (COF) and reduction of the peak pressure in the ankle joint were compared. A previously published cavovarus model with fixed hindfoot varus was simulated in 10 cadaver specimens. Closing wedge supramalleolar valgus osteotomies 3 cm above the ankle joint level (6 and 11 degrees) and lateral sliding calcaneal osteotomies (5 and 10 mm displacement) were analyzed at 300 N axial static load (half body weight). The COF migration and peak pressure decrease in the ankle were recorded using high-resolution TekScan pressure sensors. A significant lateral COF shift was observed for each osteotomy: 2.1 mm for the 6 degrees (P = .014) and 2.3 mm for the 11 degrees SMOT (P = .010). The 5 mm LCOT led to a lateral shift of 2.0 mm (P = .042) and the 10 mm LCOT to a shift of 3.0 mm (P = .006). Comparing the different osteotomies among themselves no significant differences were recorded. No significant anteroposterior COF shift was seen. A significant peak pressure reduction was recorded for each osteotomy: The SMOT led to a reduction of 29% (P = .033) for the 6 degrees and 47% (P = .003) for the 11 degrees osteotomy, and the LCOT to a reduction of 41% (P = .003) for the 5 mm and 49% (P = .002) for the 10 mm osteotomy. Similar to the COF lateralization no significant differences between the osteotomies were seen. LCOT and SMOT significantly reduced anteromedial ankle joint contact stresses in this cavovarus model. The unloading effects of both osteotomies were equivalent. More correction did not lead to significantly more lateralization of the COF or more reduction of peak pressure but a trend was seen. In patients with fixed cavovarus feet, both SMOT and LCOT provided equally good redistribution of elevated ankle joint contact forces. Increasing the amount of displacement did not seem to equally improve the joint pressures. The site of osteotomy could therefore be chosen on the basis of surgeon's preference, simplicity, or local factors in case of more complex reconstructions.
Meding, J B; Keating, E M; Ritter, M A; Faris, P M
2000-09-01
The outcome of total knee replacement after high tibial osteotomy remains uncertain. We hypothesized that the results of total knee replacement with or without a previous high tibial osteotomy are similar. The results of a consecutive series of thirty-nine bilateral total knee arthroplasties performed with cement at an average of 8.7 years after unilateral high tibial osteotomy were reviewed. There were twenty-seven men and twelve women. Preoperatively, the knee scores according to the system of the Knee Society were similar for all of the knees; however, valgus alignment and patella infera were more common in the knees with a previous high tibial osteotomy. Bilateral total knee replacement was staged in seven patients and was simultaneous in thirty-two patients. The results of the total knee arthroplasties were retrospectively reviewed with respect to the knee and function scores according to the system of the Knee Society, the radiographic findings, and the complications. Intraoperatively, no notable differences were identified in the number of medial, lateral, or lateral patellar releases required. However, less lateral tibial bone was resected in the group with a previous high tibial osteotomy (average, 3.3 millimeters) than in the group without a high tibial osteotomy (average, 7.5 millimeters). The average duration of follow-up was 7.5 years (range, three to sixteen years) in the group with a previous high tibial osteotomy and 6.8 years (range, two to ten years) in the group without a high tibial osteotomy. At the time of the final follow-up, the knee and function scores were similar for the two groups (89.0 and 81.0 points, respectively, for the group with a previous high tibial osteotomy, and 89.6 and 83.9 points, respectively, for the group without a high tibial osteotomy). Although more knees were free of pain in the group without a previous high tibial osteotomy (thirty-six) than in the group with a previous osteotomy (thirty-three), this difference was not found to be significant with the numbers available (p = 0.4810). Knee alignment and stability, femoral and tibial component alignment, and range of motion also were similar in both groups postoperatively. One allpolyethylene tibial component was revised in the high tibial osteotomy group. Two knees in each group required manipulation. There were no deep infections. While patients with a previous high tibial osteotomy may have important differences preoperatively, including valgus alignment, patella infera, and decreased bone stock in the proximal part of the tibia, the present study suggests that the clinical and radiographic results of primary total knee arthroplasty in knees with and without a previous high tibial osteotomy are not substantially different. In our relatively small group of patients, the previous high tibial osteotomy had no adverse effect on the outcome of the subsequent total knee replacement.
Alphabet Soup: Sagittal Balance Correction Osteotomies of the Spine-What Radiologists Should Know.
Takahashi, T; Kainth, D; Marette, S; Polly, D
2018-04-01
Global sagittal malalignment has been demonstrated to have correlation with clinical symptoms and is a key component to be restored in adult spinal deformity. In this article, various types of sagittal balance-correction osteotomies are reviewed primarily on the basis of the 3 most commonly used procedures: Smith-Petersen osteotomy, pedicle subtraction osteotomy, and vertebral column resection. Familiarity with the expected imaging appearance and commonly encountered complications seen on postoperative imaging studies following correction osteotomies is crucial for accurate image interpretation. © 2018 by American Journal of Neuroradiology.
Analysis of fracture healing in osteopenic bone caused by disuse: experimental study.
Paiva, A G; Yanagihara, G R; Macedo, A P; Ramos, J; Issa, J P M; Shimano, A C
2016-03-01
Osteoporosis has become a serious global public health issue. Hence, osteoporotic fracture healing has been investigated in several previous studies because there is still controversy over the effect osteoporosis has on the healing process. The current study aimed to analyze two different periods of bone healing in normal and osteopenic rats. Sixty, 7-week-old female Wistar rats were randomly divided into four groups: unrestricted and immobilized for 2 weeks after osteotomy (OU2), suspended and immobilized for 2 weeks after osteotomy (OS2), unrestricted and immobilized for 6 weeks after osteotomy (OU6), and suspended and immobilized for 6 weeks after osteotomy (OS6). Osteotomy was performed in the middle third of the right tibia 21 days after tail suspension, when the osteopenic condition was already set. The fractured limb was then immobilized by orthosis. Tibias were collected 2 and 6 weeks after osteotomy, and were analyzed by bone densitometry, mechanical testing, and histomorphometry. Bone mineral density values from bony calluses were significantly lower in the 2-week post-osteotomy groups compared with the 6-week post-osteotomy groups (multivariate general linear model analysis, P<0.000). Similarly, the mechanical properties showed that animals had stronger bones 6 weeks after osteotomy compared with 2 weeks after osteotomy (multivariate general linear model analysis, P<0.000). Histomorphometry indicated gradual bone healing. Results showed that osteopenia did not influence the bone healing process, and that time was an independent determinant factor regardless of whether the fracture was osteopenic. This suggests that the body is able to compensate for the negative effects of suspension.
Unexpected angular or rotational deformity after corrective osteotomy
2014-01-01
Background Codman’s paradox reveals a misunderstanding of geometry in orthopedic practice. Physicians often encounter situations that cannot be understood intuitively during orthopedic interventions such as corrective osteotomy. Occasionally, unexpected angular or rotational deformity occurs during surgery. This study aimed to draw the attention of orthopedic surgeons toward the concepts of orientation and rotation and demonstrate the potential for unexpected deformity after orthopedic interventions. This study focused on three situations: shoulder arthrodesis, femoral varization derotational osteotomy, and femoral derotation osteotomy. Methods First, a shoulder model was generated to calculate unexpected rotational deformity to demonstrate Codman’s paradox. Second, femoral varization derotational osteotomy was simulated using a cylinder model. Third, a reconstructed femoral model was used to calculate unexpected angular or rotational deformity during femoral derotation osteotomy. Results Unexpected external rotation was found after forward elevation and abduction of the shoulder joint. In the varization and derotation model, closed-wedge osteotomy and additional derotation resulted in an unexpected extension and valgus deformity, namely, under-correction of coxa valga. After femoral derotational osteotomy, varization and extension of the distal fragment occurred, although the extension was negligible. Conclusions Surgeons should be aware of unexpected angular deformity after surgical procedure involving bony areas. The degree of deformity differs depending on the context of the surgical procedure. However, this study reveals that notable deformities can be expected during orthopedic procedures such as femoral varization derotational osteotomy. PMID:24886469
Siroraj, A Pearlcid; Giri G V V; Ramkumar, Subramaniam; Narasimhan, Malathi
2016-05-01
The aim of this study was to find out the ideal speed for making a precise osteotomy with minimal damage to the surrounding bone. Thirty-six patients were divided into two groups (n=18 in each) depending on the speed of the handpiece used for osteotomy (slow=20000rpm and fast=40000rpm). Samples were taken from the peripheral bone and examined histologically to measure the margins of the osteotomy, the amount of debris produced, and the degree of thermal osteonecrosis. The osteotomy made with the high speed handpiece was better than that made with the low speed one on all counts. The margins in the high speed group were more or less precisely as required, with less debris and no thermal necrosis, which illustrated the efficacy of a high speed osteotomy. These findings can apply to other procedures that involve osteotomies in maxillofacial surgery. Copyright © 2016 The British Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.
Weil, Lowell; Consul, Devon
2015-07-01
A tailor's bunion or bunionette deformity is a combination of osseous and soft tissue bursitis on the lateral aspect of the fifth metatarsal head. This article discusses 7 corrective measures: medial oblique sliding osteotomy with fixation, medial oblique slide osteotomy-minimal incision procedure without fixation, SERI (simple, effective, rapid, inexpensive) with fixation, chevron with or without fixation, closing, lateral wedge osteotomy at the metatarsal neck or proximal diaphysis, Weil osteotomy, and scarfette. These evidence-based techniques can be used by practitioners for medical management of their patients through evaluation, diagnosis, and prognosis. Complications are also addressed. Copyright © 2015 Elsevier Inc. All rights reserved.
Smith, Simon E; Landorf, Karl B; Butterworth, Paul A; Menz, Hylton B
2012-01-01
The chevron and scarf osteotomies are commonly used for the surgical management of hallux valgus (HV). However, there is debate as to whether one osteotomy provides more 1-2 intermetatarsal (1-2 IMA) correction than the other. The objective of this systematic review and meta-analysis was to compare the effectiveness of 3 types of first metatarsal osteotomy for reducing the 1-2 IMA in HV correction: the chevron osteotomy, the long plantar arm (modified) chevron osteotomy, and the scarf osteotomy. A systematic search for eligible studies was performed of the following databases: Medline, Embase (Ovid), CINAHL (EBSCO Host), and The Cochrane Database of Systematic Reviews and Cochrane Central Register of Controlled Clinical Trials. Only English-language studies previous to May 2010 were included in the review. Additional hand and electronic content searches of relevant foot and orthopaedic journals were performed. Criteria for inclusion in this analysis included systematic reviews of randomized controlled trials, prospective and retrospective cohort studies, and case-control studies, as well as case-series studies involving the chevron, scarf, or long plantar arm chevron osteotomy of >20 participants with a minimum of 80% follow-up. Quality of evidence of the included studies was assessed with the Grading of Recommendations Assessment, Development and Evaluation system. All pooled analyses were based on a fixed effects model. There was a total of 1351 participants who underwent either a chevron (n = 1028), scarf (n = 300), or long plantar arm chevron osteotomy (n = 23). Only one study for the long plantar arm chevron group fitted the eligibility criteria for this review; however, it was not amenable to meta-analysis. The chevron osteotomy was associated with a mean reduction of 1-2 IMA from preoperative to postoperative of 5.33° (95% confidence interval, 5.12 to 5.54, p < .001), and the scarf osteotomy was associated with a mean reduction of 6.21° (95% confidence interval, 5.70 to 6.72, p < .001). There was a statistically significant 0.88° increase in the correction of the 1-2 IMA in favor of the scarf osteotomy compared with the chevron osteotomy. The studies included in this review were of very low- to low-quality evidence. Our findings indicate that the scarf osteotomy provides greater correction of the 1-2 IMA when used for HV correction. However, only a weak recommendation in favor of the scarf osteotomy can be made based on the low quality of evidence of the studies included in this analysis. Copyright © 2012 American College of Foot and Ankle Surgeons. Published by Elsevier Inc. All rights reserved.
... joint. A tibial osteotomy may make you look "knock-kneed." A femoral osteotomy may make you look " ... Updated by: C. Benjamin Ma, MD, Professor, Chief, Sports Medicine and Shoulder Service, UCSF Department of Orthopaedic ...
Kievit, A J; Dobbe, J G G; Streekstra, G J; Blankevoort, L; Schafroth, M U
2018-06-01
Malalignment of implants is a major source of failure during total knee arthroplasty. To achieve more accurate 3D planning and execution of the osteotomy cuts during surgery, the Signature (Biomet, Warsaw) patient-specific instrumentation (PSI) was used to produce pin guides for the positioning of the osteotomy blocks by means of computer-aided manufacture based on CT scan images. The research question of this study is: what is the transfer accuracy of osteotomy planes predicted by the Signature PSI system for preoperative 3D planning and intraoperative block-guided pin placement to perform total knee arthroplasty procedures? The transfer accuracy achieved by using the Signature PSI system was evaluated by comparing the osteotomy planes predicted preoperatively with the osteotomy planes seen intraoperatively in human cadaveric legs. Outcomes were measured in terms of translational and rotational errors (varus, valgus, flexion, extension and axial rotation) for both tibia and femur osteotomies. Average translational errors between the osteotomy planes predicted using the Signature system and the actual osteotomy planes achieved was 0.8 mm (± 0.5 mm) for the tibia and 0.7 mm (± 4.0 mm) for the femur. Average rotational errors in relation to predicted and achieved osteotomy planes were 0.1° (± 1.2°) of varus and 0.4° (± 1.7°) of anterior slope (extension) for the tibia, and 2.8° (± 2.0°) of varus and 0.9° (± 2.7°) of flexion and 1.4° (± 2.2°) of external rotation for the femur. The similarity between osteotomy planes predicted using the Signature system and osteotomy planes actually achieved was excellent for the tibia although some discrepancies were seen for the femur. The use of 3D system techniques in TKA surgery can provide accurate intraoperative guidance, especially for patients with deformed bone, tailored to individual patients and ensure better placement of the implant.
Effect of the Rhinoplasty Technique and Lateral Osteotomy on Periorbital Edema and Ecchymosis.
Kiliç, Caner; Tuncel, Ümit; Cömert, Ela; Şencan, Ziya
2015-07-01
The present study aimed to compare edema and ecchymosis in the early and late postoperative periods following the application of different surgical techniques (open and endonasal) and different types of lateral osteotomy (internal and external). The files and photographs of a total of 120 patients whose records were regularly maintained/updated and who underwent septorhinoplasty operation with the same surgeon were retrospectively evaluated. Sixty-nine (57.5%) patients were women and 51 (43.5%) were men. The patients were divided into 4 different groups according to the operations they underwent as follows--Group I: open technique septorhinoplasty + internal/continuous lateral osteotomy; Group II: endonasal rhinoplasty + internal/continuous lateral osteotomy; Group III: open technique septorhinoplasty + external/perforating lateral osteotomy; and Group IV: endonasal rhinoplasty + external/perforating lateral osteotomy. Postoperative edema and ecchymosis, and lateral nasal wall mucosal damage because of osteotomy were evaluated. Postoperative second day edema and ecchymosis scores were statistically significantly better in patients in Group II compared with the patients in Group I (P = 0.010 and P = 0.004, respectively). Postoperative first day edema and postoperative seventh day ecchymosis scores were statistically significantly better in the patients in Group IV compared with the patients in Group III (P = 0.025 and P = 0.011, respectively). Intraoperative bleeding was similar in all groups. The nasal tip was more flexible in patients who underwent closed technique rhinoplasty. Unilateral mucosal damage occurred in 3 patients (4%) with internal lateral osteotomy, whereas no mucosal damage was present in patients with external osteotomy. The difference in the rate of edema and ecchymosis in the early postoperative period between the closed technique rhinoplasty and the open surgical approach was statistically significant, whereas osteotomy did not cause a significant difference. According to these results, the authors suggest endonasal surgery to prevent the development of edema and ecchymosis, whereas the choice of lateral osteotomy should be dependent on the experience of the surgeon.
Boffeli, Troy J; Abben, Kyle W
2015-01-01
Surgical correction of flexible flatfoot deformity and posterior tibial tendon dysfunction has been extensively reported in published studies. When appropriate, calcaneal osteotomies for flatfoot correction have been a favorite of foot and ankle surgeons because of the corrective power achieved without the need to fuse any rearfoot joints. The medial displacement calcaneal osteotomy and Evans calcaneal osteotomy, together termed the double calcaneal osteotomy, have been reported several times by various investigators with a wide variety of fixation options. We undertook an institutional review board-approved retrospective review of 9 consecutive patients (11 feet), who had undergone double calcaneal osteotomy with 2 percutaneous Steinmann pin fixation for the correction of flexible flatfoot deformity, with or without posterior tibial tendon dysfunction. All patients had radiographic evidence of bone healing of the posterior calcaneal osteotomy and incorporation of the Evans osteotomy bone graft at 6 weeks and demonstrated clinical healing at 6 weeks. All patients had 2 percutaneous Steinmann pins placed through both osteotomies, and these were removed an average of 6 weeks postoperatively. No patient developed pin site complications. The only complication noted was sural neuritis, which was likely incision related. No patients had delayed union or nonunion, and we did not identify any graft shifting postoperatively. The present retrospective series highlights our experience with 2 percutaneous Steinmann pin fixation, demonstrating equal or better results than many previous published fixation methods for double calcaneal osteotomy. It is cost-effective and minimizes the potential risk of iatrogenic Achilles pathologic features associated with screw fixation. Copyright © 2015 American College of Foot and Ankle Surgeons. Published by Elsevier Inc. All rights reserved.
Predicting translational deformity following opening-wedge osteotomy for lower limb realignment.
Barksfield, Richard C; Monsell, Fergal P
2015-11-01
An opening-wedge osteotomy is well recognised for the management of limb deformity and requires an understanding of the principles of geometry. Translation at the osteotomy is needed when the osteotomy is performed away from the centre of rotation of angulation (CORA), but the amount of translation varies with the distance from the CORA. This translation enables proximal and distal axes on either side of the proposed osteotomy to realign. We have developed two experimental models to establish whether the amount of translation required (based on the translation deformity created) can be predicted based upon simple trigonometry. A predictive algorithm was derived where translational deformity was predicted as 2(tan α × d), where α represents 50 % of the desired angular correction, and d is the distance of the desired osteotomy site from the CORA. A simulated model was developed using TraumaCad online digital software suite (Brainlab AG, Germany). Osteotomies were simulated in the distal femur, proximal tibia and distal tibia for nine sets of lower limb scanograms at incremental distances from the CORA and the resulting translational deformity recorded. There was strong correlation between the distance of the osteotomy from the CORA and simulated translation deformity for distal femoral deformities (correlation coefficient 0.99, p < 0.0001), proximal tibial deformities (correlation coefficient 0.93-0.99, p < 0.0001) and distal tibial deformities (correlation coefficient 0.99, p < 0.0001). There was excellent agreement between the predictive algorithm and simulated translational deformity for all nine simulations (correlation coefficient 0.93-0.99, p < 0.0001). Translational deformity following corrective osteotomy for lower limb deformity can be anticipated and predicted based upon the angular correction and the distance between the planned osteotomy site and the CORA.
Jung, Kwang Am; Kim, Sung Jae; Lee, Su Chan; Jeong, Jae Hoon; Song, Moon Bok; Lee, Choon Key
2009-07-01
Simultaneous repair of a radial tear at the tibial attachment site of the posterior horn of the medial meniscus under special circumstances requiring tibial valgus osteotomy is technically difficult. First, most patients who need an osteotomy have a narrowed medial tibiofemoral joint space. In such a situation, the pull-out suture technique is more difficult to perform than in a normal joint space. Second, pulling out suture strands that penetrate the posterior horn of the medial meniscus to the anterior tibial cortex increases the risk of transection during osteotomy. We performed a meniscus repair combined with an opening wedge tibial valgus osteotomy without complications and present our technique as a new method for use in selective cases necessitating both meniscus repair of a complete radial tear and opening wedge tibial osteotomy.
Strength of fixation constructs for basilar osteotomies of the first metatarsal.
Lian, G J; Markolf, K; Cracchiolo, A
1992-01-01
Twenty-four pairs of fresh-frozen human feet had a proximal osteotomy of the first metatarsal that was fixed using either screws, staples, or K wires. Each metatarsal was excised and the specimen was loaded to failure in a cantilever beam configuration by applying a superiorly directed force to the metatarsal head using an MTS servohydraulic test machine. Specimens with a crescentic osteotomy that were fixed using a single screw demonstrated higher mean failure moments than pairs that were fixed with four staples or two K wires; staples were the weakest construct. All specimens fixed with staples failed by bending of the staples without bony fracture; all K wire constructs but one failed by wire bending. Chevron and crescentic osteotomies fixed with a single screw demonstrated equal bending strengths; the bending strength of an oblique osteotomy fixed with two screws was 82% greater than for a crescentic osteotomy fixed with a single screw. Basilar osteotomies of the first metatarsal are useful in correcting metatarsus primus varus often associated with hallux valgus pathology. Fixation strength is an important consideration since weightbearing forces on the head of the first metatarsal acting at a distance from the osteotomy site subject the construct to a dorsiflexion bending moment, as simulated in our tests. Our results show that screw fixation is the strongest method for stabilizing a basilar osteotomy. Based upon the relatively low bending strengths of the staple and K wire constructs, we would not recommend these forms of fixation.(ABSTRACT TRUNCATED AT 250 WORDS)
High tibial osteotomy in knee laxities: Concepts review and results
Robin, Jonathan G.; Neyret, Philippe
2016-01-01
Patients with unstable, malaligned knees often present a challenging management scenario, and careful attention must be paid to the clinical history and examination to determine the priorities of treatment. Isolated knee instability treated with ligament reconstruction and isolated knee malalignment treated with periarticular osteotomy have both been well studied in the past. More recently, the effects of high tibial osteotomy on knee instability have been studied. Lateral closing-wedge high tibial osteotomy tends to reduce the posterior tibial slope, which has a stabilising effect on anterior tibial instability that occurs with ACL deficiency. Medial opening-wedge high tibial osteotomy tends to increase the posterior tibia slope, which has a stabilising effect in posterior tibial instability that occurs with PCL deficiency. Overall results from recent studies indicate that there is a role for combined ligament reconstruction and periarticular knee osteotomy. The use of high tibial osteotomy has been able to extend the indication for ligament reconstruction which, when combined, may ultimately halt the evolution of arthritis and preserve their natural knee joint for a longer period of time. Cite this article: Robin JG, Neyret P. High tibial osteotomy in knee laxities: Concepts review and results. EFORT Open Rev 2016;1:3-11. doi: 10.1302/2058-5241.1.000001. PMID:28461908
Iskenderoglu, Nur Serife; Choi, Byung-Joon; Seo, Kyung Won; Lee, Yeon-Ji; Lee, Baek-Soo; Kim, Seong-Hun
2017-01-01
This article presents the alternative surgical treatments of both anterior protrusion by carrying out retraction on mandibular anterior fragment, meanwhile applying retraction force on maxilla anterior teeth and ectopically erupted canine with using platelet-rich fibrin (PRF). Anterior segmental osteotomy was combined with linear corticotomy under local anesthesia. The correction of right ectopic canine was achieved through 2 stages. First, dento-osseous osteotomy on palatal side was performed. Then second osteotomy with immediate manual repositioning of the canine with concomitant first premolar extraction was enhanced with PRF, which was prepared by centrifuging patient's blood, applied into buccal side of high canine during osteotomy. Mandibular retraction was accomplished by anterior segmental osteotomy. Single-tooth osteotomy is a more effective surgical method for ankylosed or ectopically erupted tooth in orthodontic treatment. It can reduce the total orthodontic treatment time and root resorption, 1 common complication. Significant improved bone formation was seen with the addition of PRF on noncritical size defects in the animal model. It is reasonable to think that PRF can promote bone regeneration. So early bone formation also can reduce the complication such as postoperative infection. As an alternative to anterior protrusion and ectopically erupted canine treatment, segmental osteotomy and corticotomy combined platelet-rich plasma can enhance orthodontic treatment outcome.
Evaluation of the three-dimensional bony coverage before and after rotational acetabular osteotomy.
Tanaka, Takeyuki; Moro, Toru; Takatori, Yoshio; Oshima, Hirofumi; Ito, Hideya; Sugita, Naohiko; Mitsuishi, Mamoru; Tanaka, Sakae
2018-02-26
Rotational acetabular osteotomy is a type of pelvic osteotomy that involves rotation of the acetabular bone to improve the bony coverage of the femoral head for patients with acetabular dysplasia. Favourable post-operative long-term outcomes have been reported in previous studies. However, there is a paucity of published data regarding three-dimensional bony coverage. The present study investigated the three-dimensional bony coverage of the acetabulum covering the femoral head in hips before and after rotational acetabular osteotomy and in normal hips. The computed tomography data of 40 hip joints (12 joints before and after rotational acetabular osteotomy; 16 normal joints) were analyzed. The three-dimensional bony coverage of each joint was evaluated using original software. The post-operative bony coverage improved significantly compared with pre-operative values. In particular, the anterolateral aspect of the acetabulum tended to be dysplastic in patients with acetabular dysplasia compared to those with normal hip joints. However, greater bony coverage at the anterolateral aspect was obtained after rotational acetabular osteotomy. Meanwhile, the results of the present study may indicate that the bony coverage in the anterior aspect may be excessive. Three-dimensional analysis indicated that rotational acetabular osteotomy achieved favorable bony coverage. Further investigations are necessary to determine the ideal bony coverage after rotational acetabular osteotomy.
Computer-assisted spinal osteotomy: a technical note and report of four cases.
Fujibayashi, Shunsuke; Neo, Masashi; Takemoto, Mitsuru; Ota, Masato; Nakayama, Tomitaka; Toguchida, Junya; Nakamura, Takashi
2010-08-15
A report of 4 cases of spinal osteotomy performed under the guidance of a computer-assisted navigation system and a technical note about the use of the navigation system for spinal osteotomy. To document the surgical technique and usefulness of computer-assisted surgery for spinal osteotomy. A computer-assisted navigation system provides accurate 3-dimensional (3D) real-time surgical information during the operation. Although there are many reports on the accuracy and usefulness of a navigation system for pedicle screw placement, there are few reports on the application for spinal osteotomy. We report on 4 complex cases including 3 solitary malignant spinal tumors and 1 spinal kyphotic deformity of ankylosing spondylitis, which were treated surgically using a computer-assisted spinal osteotomy. The surgical technique and postoperative clinical and radiologic results are presented. 3D spinal osteotomy under the guidance of a computer-assisted navigation system was performed successfully in 4 patients. All malignant tumors were resected en bloc, and the spinal deformity was corrected precisely according to the preoperative plan. Pathologic analysis confirmed the en bloc resection without tumor exposure in the 3 patients with a spinal tumor. The use of a computer-assisted navigation system will help ensure the safety and efficacy of a complex 3D spinal osteotomy.
Krengel, W F; Staheli, L T
1992-10-01
A retrospective analysis was done of 52 rotational tibial osteotomies (RTOs) performed on 35 patients with severe idiopathic tibial torsion. Thirty-nine osteotomies were performed at the proximal or midtibial level. Thirteen were performed at the distal tibial level with a technique previously described by one of the authors. Serious complications occurred in five (13%) of the proximal and in none of the distal RTOs. For severe and persisting idiopathic tibial torsion, the authors recommend correction by RTO at the distal level. Proximal level osteotomy is indicated only when a varus or valgus deformity required concurrent correction.
Mahadevan, Devendra; Lines, Stephen; Hepple, Stephen; Winson, Ian; Harries, William
2016-06-01
The purpose of this RCT was to compare the extended plantar limb (modified) chevron osteotomy with the scarf osteotomy in correcting hallux valgus deformity and improving functional scores and patient satisfaction. Patients were randomly assigned and kept blind to surgical allocation. Cases requiring additional procedures including the Akin osteotomy were excluded. Outcomes were measured at 1 year following surgery. 84 patients (109 feet) were analysed (60 modified chevron; 49 Scarf). The mean age was 50.7 years (75F: 9M). Post-operative intermetatarsal angle (IMA) was significantly lower in the modified chevron group (5.8° versus 6.9°, p=0.045). Hallux valgus angle and distal metatarsal articular angle were similar. The magnitude of IMA correction with the modified chevron was also significantly greater (9.1° versus 7.1°, p=0.007). Both osteotomies produced comparable MOxFQ scores and satisfaction ratings. The modified chevron was superior to the scarf osteotomy in correcting IMA in hallux valgus deformity. Copyright © 2015 European Foot and Ankle Society. Published by Elsevier Ltd. All rights reserved.
Wagener, Marc L; Dezillie, Marleen; Hoendervangers, Yvette; Eygendaal, Denise
2015-04-01
Exposure of the distal humerus in case of an articular fracture is often performed through a Chevron osteotomy of the olecranon. Several options have been described for re-fixation of the Chevron osteotomy. Pull-out of the hard-wear is often seen as complication. In this study, an evaluation of the re-fixation of the Chevron osteotomy through a cancellous screw and suture tension band was performed. The data of 19 patients in whom a Chevron osteotomy was re-fixated with a cancellous screw in combination with a suture tension band were used. Evaluation was performed by assessment of the post-operative X-rays and documentation of complications. In all 19 cases, evaluation of the post-operative X-rays showed complete consolidation without dislocation or other complications. Re-fixation of a Chevron osteotomy of the olecranon with a large cancellous screw with a suture tension band provides adequate stability to result in proper healing of the osteotomy in primary cases when early post-operative mobilisation is allowed. Complications as pull-out of the hard-wear were not reported.
Extra-articular osteotomy for malunited unicondylar fractures of the proximal phalanx.
Harness, Neil G; Chen, Alvin; Jupiter, Jesse B
2005-05-01
To evaluate an extra-articular osteotomy rather than an intra-articular osteotomy in the treatment of malunited unicondylar fractures of the proximal phalanx. An extra-articular osteotomy was used to correct the deformity resulting from a malunion of a unicondylar fracture of the proximal phalanx in 5 patients. A closing wedge osteotomy that was stabilized with tension band fixation accomplished realignment of the joint. Each patient was evaluated at a minimum of 1 year after surgery for radiographic healing, correction of angulation, digital motion, postoperative complications, current level of pain with motion, and overall satisfaction with the procedure. All of the osteotomies healed by 10 to 12 weeks after surgery with an average angular correction from 25 degrees to 1 degrees . The average proximal interphalangeal joint motion improved to 86 degrees from the preoperative average of 40 degrees , whereas the average total digital motion improved from 154 degrees before surgery to 204 degrees at follow-up evaluation. This method of extra-articular osteotomy for malunited unicondylar fractures of the proximal phalanx is highly reproducible, avoids the risks of intra-articular surgery, and leads to a predictable outcome.
Dalband, Mohsen; Kashani, Jamal; Hashemzehi, Hadi
2015-04-01
The aim of this study was to investigate the displacement and stress distribution during surgically assisted rapid maxillary expansion under different surgical conditions with tooth- and bone-borne devices. Three-dimensional (3D) finite element model of a maxilla was constructed and an expansion force of 100 N was applied to the left and right molars and premolars with tooth-borne devices and the left and right of mid-palatal sutures at the first molar level with bone-borne devices. Five computer-aided design (CAD) models were simulated as follows and surgical procedures were used: G1: control group (without surgery); G2: Le Fort I osteotomy; G3: Le Fort I osteotomy and para-median osteotomy; G4: Le Fort I osteotomy and pterygomaxillary separation; and G5: Le Fort I osteotomy, para-median osteotomy, and pterygomaxillary separation. Maxillary displacement showed a gradual increase from G1 to G5 in all three planes of space, indicating that Le Fort I osteotomy combined with para-median osteotomy and pterygomaxillary separation produced the greatest displacement of the maxilla with both bone- and tooth-borne devices. Surgical relief and bone-borne devices resulted in significantly reduced stress on anchored teeth. Combination of Le Fort I and para-median osteotomy with pterygomaxillary separation seems to be an effective procedure for increasing maxillary expansion, and excessive stress side effects are lowered around the anchored teeth with the use of bone-borne devices.
The True Ponte Osteotomy: By the One Who Developed It.
Ponte, Alberto; Orlando, Giuseppe; Siccardi, Gian Luigi
2018-01-01
Technique and applications. To define the anatomy, biomechanics, indications, and surgical technique of the true Ponte osteotomy. The Ponte osteotomy, originally developed for thoracic kyphosis, was the first one to obtain posterior shortening of the thoracic spine, maintaining the anterior column load-sharing capacity. It has become a widely applied technique in various types of spine deformities and a frequent topic of presentations at meetings and in scientific articles. Several of them offer unquestionable evidence of an incorrect execution, with consequently distorted outcomes and erroneous conclusions. A clearing up became essential. Our original experience is based on a series of 240 patients with thoracic hyperkyphosis operated in the years 1969-2015, at first with a standard posterior Harrington technique and then by using the Ponte osteotomy with different instrumentations. A series of 78 of them, operated in the years 1987-1997, who had Ponte osteotomies at every level, is presented. The average preoperative kyphosis has been corrected from 80° (range 61°-102°) to 31° (range 15°-50°) by a substantial posterior shortening. A number of publications use the term Ponte osteotomy loosely for by far incomplete resections and mixing it up with Smith-Petersen's osteotomy. The true Ponte osteotomy is capable of producing marked flexibility in extension, flexion and rotation, justifying its wide use in thoracic deformities, mainly in scoliosis. An exact performance of the osteotomy with adequate bony resections, including the laminae, is an absolute condition to take full advantage of its properties. Level IV, therapeutic study. Copyright © 2017 Scoliosis Research Society. Published by Elsevier Inc. All rights reserved.
Ricard, Daniel; Ferri, Joël
2009-08-01
We describe a new surgical procedure to improve stability when counterclockwise rotation of the maxillomandibular complex and the occlusal plane is intended. This preliminary prospective study evaluated 10 patients (8 female patients and 2 male patients) who each underwent maxillomandibular surgical advancement with counterclockwise rotation of the occlusal plane. A mandibular counterclockwise rotation was done in all cases with bilateral ramus sagittal split osteotomy. After the split of the ramus had been completed, a vertical osteotomy was done distally to the second molar on the internal ramus segment. With the completion of this vertical osteotomy, the internal ramus segment became completely mobile. All osteotomies were stabilized with rigid internal fixation by use of plates with monocortical screws. Ten patients have been treated with the "mobilizing vertical osteotomy of the internal ramus segment." The mean reduction of the occlusal plane angle was 10.1 degrees , showing a substantial counterclockwise rotation of the maxillomandibular complex. All patients had significant improvement of their facial balance. After a 1-year follow-up period, all cases but 1 showed very good stability of their occlusion and occlusal plane angle. An 11.4% relapse of the forward movement of the mandible was noted. On the basis of this prospective study, we conclude that when performing a counterclockwise rotation of the maxillomandibular complex, the mobilizing vertical osteotomy of the internal ramus segment combined with the sagittal split osteotomy of the mandible potentially enhances the occlusal plane angle and occlusal stability after a 1-year period.
Effect of various hallux valgus reconstruction on sesamoid location: a radiographic study.
Huang, Eddie H; Charlton, Timothy P; Ajayi, Samuel; Thordarson, David B
2013-01-01
The correction of sesamoid subluxation is an important component of hallux valgus reconstruction with some surgeons feeling that the sesamoids can be pulled back under the first metatarsal head when imbricating the medial capsule during surgery. The purpose of this study was to radiographically assess the effect of an osteotomy on sesamoid location relative to the second metatarsal. This is a retrospective radiographic study review of 165 patients with hallux valgus treated with reconstructive osteotomies. Patients were included if they underwent a scarf or basilar osteotomy for hallux valgus but were excluded if they had inflammatory arthropathy or lesser metatarsal osteotomy. A modified McBride soft tissue procedure was performed in conjunction with the basilar and scarf osteotomies. Each patient's preoperative and postoperative radiographs were evaluated for hallux valgus angle, intermetatarsal 1-2 angle, tibial sesamoid classification, and lateral sesamoid location relative to the second metatarsal. The greatest correction of both hallux valgus and intermetatrsal 1-2 angle was achieved in basilar osteotomies (20.6 degrees and 9.7 degrees, respectively), then scarf osteotomies (14.4 degrees and 8.7 degrees, respectively). Basilar and scarf osteotomies both corrected medial sesamoid subluxation relative to the first metatarsal head an average of 2-3 classification stages. All osteotomies had minimal lateral sesamoid location change relative to the second metatarsal. The majority of sesamoid correction correlated with the intermetatarsal 1-2 correction. The concept that medial capsular plication pulls the sesamoids beneath the first metatarsal (ie, changes the location of the sesamoids relative to the second metatarsal) was not supported by our results. Level III, retrospective case series.
Single absorbable polydioxanone pin fixation for distal chevron bunion osteotomies.
Deorio, J K; Ware, A W
2001-10-01
The distal chevron osteotomy is a well-established technique for correction of symptomatic mild to moderate metatarsus primus varus with hallux valgus deformity. Fixation of the osteotomy ranges from none to bone pegs, Kirschner wires, screws, or absorbable pins. We evaluated one surgeon's (J.K.D.) results of distal chevron osteotomy fixation with a single, nonpredrilled, 1.3-mm poly-p-dioxanone pin and analyzed any differences in patients with unilateral or bilateral symptomatic metatarsus primus varus with hallux valgus deformities. All osteotomies healed without evidence of infection, osteolysis, nonunion, or necrosis. Equal correction was achieved in unilateral and bilateral procedures. The technique is quick and easy, and adequate fixation is achieved.
Lamb, Joshua; Murawski, Christopher D; Deyer, Timothy W; Kennedy, John G
2013-06-01
The purpose of this study was to retrospectively evaluate a large series of patients for functional, radiographic and MRI outcomes after a Chevron-type medial malleolar osteotomy. Sixty-two patients underwent a Chevron-type medial malleolar osteotomy with a median follow-up of 34.5 months. Standard digital radiographs were used to determine bony union and the angle of the osteotomy relative to the longitudinal axis of the tibia. Morphologic and quantitative T2-mapping MRI was also analysed in 32 patients. Fifty-eight patients (94 %) reported being asymptomatic at the site of the medial malleolar osteotomy. The median time to healing on standard radiograph was 6 weeks (range, 4-6 weeks) with an angle of 31.7° ± 6.9°. Quantitative T2-mapping MRI analysis demonstrated that the deep half of interface repair tissue had relaxation times that were not significantly different from normal tibial cartilage. In contrast, interface repair tissue in the superficial half demonstrated significant prolongation from normal relaxation time values, indicating a more fibrocartilaginous repair. Four patients (6 %) reported pain post-operatively. A Chevron-type medial malleolar osteotomy demonstrates satisfactory healing and fixation, with fibrocartilaginous tissue evident superficially at the osteotomy interface. Further investigation is warranted in the form of longitudinal study to assess the long-term outcomes of medial malleolar osteotomy.
2014-01-01
Introduction Hallux valgus (bunions) are prominent and often inflamed metatarsal heads and overlying bursae. They are associated with valgus deviation of the great toe which moves towards the second toe. Hallux valgus is found in at least 2% of children aged 9 to 10 years, and almost half of adults, with greater prevalence in women. Methods and outcomes We conducted a systematic review and aimed to answer the following clinical questions: What are the effects of conservative treatments for hallux valgus (bunions)? What are the effects of osteotomy for hallux valgus (bunions)? We searched: Medline, Embase, The Cochrane Library, and other important databases up to October 2013 (Clinical Evidence reviews are updated periodically; please check our website for the most up-to-date version of this review). We included harms alerts from relevant organisations such as the US Food and Drug Administration (FDA) and the UK Medicines and Healthcare products Regulatory Agency (MHRA). Results We found 15 studies that met our inclusion criteria. We performed a GRADE evaluation of the quality of evidence for interventions. Conclusions In this systematic review, we present information relating to the effectiveness and safety of the following interventions: chevron osteotomy plus adductor tenotomy; distal metatarsal osteotomy; minimally invasive surgery (percutaneous distal metatarsal osteotomy, SERI [Simple, Effective, Rapid, Inexpensive] distal metatarsal osteotomy); phalangeal (Akin) osteotomy plus distal chevron osteotomy; proximal osteotomy; night splints; and orthoses (including antipronatory orthoses in children).
Cameron, James I; McCauley, Julie C; Kermanshahi, Arash Y; Bugbee, William D
2015-06-01
Distal femoral varus osteotomy may be used to treat valgus knee malalignment or to protect a knee compartment in which cartilage restoration surgery (such as osteochondral or meniscus allografting) has been performed. Medial closing-wedge osteotomy has demonstrated good success in treatment of osteoarthritis in published series, but few studies have evaluated distal femoral lateral opening-wedge osteotomy in terms of correction of deformity, pain and function, and survivorship. (1) Does lateral opening-wedge osteotomy lead to accurate correction? (2) What pain and function levels do patients experience after lateral opening-wedge osteotomy? (3) What are the nonunion, complication, and reoperation rates after lateral opening-wedge osteotomy? Between 2000 and 2010, we performed 40 distal femoral osteotomies. Two knees (two patients) underwent a medial closing-wedge osteotomy and were excluded from the present study. Thirty-eight knees (97%) in 36 patients were lateral opening-wedge varus-producing osteotomies; of those, 31 knees (82%) in 30 patients had followup at a minimum of 2 years (mean, 5 years; SD, 2; range, 2-12 years) and comprised the study population. The indications for osteotomy included symptomatic lateral compartment arthritis with clinical valgus deformity or a cartilage or meniscal defect in the lateral compartment with clinical valgus alignment. The study population was stratified into two groups based on reason for osteotomy: patients with isolated symptomatic lateral compartment arthritis (arthritis group; 19 knees [61%]) and patients who underwent joint preservation procedures including osteochondral allograft transplantation or meniscal allograft transplantation (joint preservation group; 12 knees [39%]). Data collection from our institution's osteotomy database included patient demographics, lower extremity coronal alignment, and operative details. Pain and function were measured preoperatively and postoperatively using the International Knee Documentation Committee (IKDC) score. Time to radiographic union, complications, and reoperations were recorded. Twenty-one of 31 knees had postoperative radiographic data available for review. Of these, seven of 15 knees in the arthritis group and three of six knees in the joint preservation group were within the correction goal of ± 3° from neutral mechanical alignment. In the arthritis group, the mean IKDC total score improved from 47 (SD, 15) preoperatively to 67 (SD, 10) postoperatively. In the joint preservation group, the mean IKDC total score improved from 36 (SD, 12) preoperatively to 62 (SD, 18) postoperatively. One nonunion occurred in the arthritis group. No postoperative complications were experienced. Ten knees in the arthritis group and six knees in the joint preservation group had additional surgery after the osteotomy, consisting primarily of hardware removal, arthroscopy for cartilage-related conditions, or conversion to arthroplasty. Survivorship at 5 years, with conversion to arthroplasty as the endpoint, was 74% in the arthritis group and 92% in the joint preservation group. Lateral opening-wedge distal femoral osteotomy was less accurate in correction of valgus deformity than expected, but the procedure was associated with improved knee pain and function scores. Our clinical and radiographic results are comparable to published series evaluating medial closing-wedge distal femoral osteotomy. Achieving our desired correction of ± 3° from neutral alignment was clinically difficult. An improved method of preoperative templating and refinement of the intraoperative technique may improve this. Future studies with more patients and longer followup will provide clarity on this topic. Level IV, therapeutic study.
Comparison of the proximal chevron and Ludloff osteotomies for the correction of hallux valgus.
Choi, Woo Jin; Yoon, Han Kook; Yoon, Hang Seob; Kim, Bom Soo; Lee, Jin Woo
2009-12-01
Although several studies have described good results of proximal chevron and Ludloff osteotomies, there have been no studies comparing the results of these two techniques at a single institution. We consecutively evaluated 46 patients who underwent proximal chevron osteotomies and 52 patients who underwent Ludloff osteotomies. Patients were evaluated by preoperative and postoperative weight bearing radiographs and the American Orthopaedic Foot and Ankle Society (AOFAS) hallux MP score. Both groups had similarly high AOFAS scores and good correction by radiographic parameters. No statistically significant differences were found with respect to correction of hallux valgus angle (HVA) and intermetatarsal angle (IMA) between the two groups. Significant shortening of the first metatarsal was found after Ludloff osteotomy (p < 0.05). At 6 weeks after surgery, the pain subscore was significantly lower in the proximal chevron group than in the Ludloff group (p < 0.05). The proximal chevron and Ludloff osteotomies yielded equivalent clinical and radiological results. The Ludloff osteotomy with lag screw fixation is more stable and does not require postoperative hardware removal, although it is technically demanding and has a tendency toward greater shortening of the first metatarsal.
Rozkydal, Z; Janíček, P; Otiepka, P
2010-01-01
The aim of this retrospective study was to assess the results of varus osteotomy of the proximal femur in adults with coxa valga after developmental dysplasia of the hip (DDH) and to evaluate the efficacy of this method. Thirty hips in 28 patients treated by proximal femoral varus osteotomy in the period from 1983 to 1990 were evaluated. The indication for surgery involved coxa valga (145°-168°) with grade I- III of osteoarthritis and mild acetabular dysplasia. The patient group comprised twenty six women and two men with an average age of 28 years (18 to 42) at the time of surgery. The mean follow-up was 22 years (19 to 26). The preoperative radiographic examination included an AP view of the pelvis, AP views of the hip in neutral and in frog-leg position and AP views of the hip in 30° of abduction and neutral rotation. Varus osteotomy was indicated when the best position of the hip joint was achieved in abduction. The procedure was performed according to M. Müller. Hip assessment was based on the grade of osteoarthritis, CCD angle, Wiberg angle and AHI index. The results were statistically evaluated using the life table analysis of clinical survivorship of osteotomy and the Kaplan- Meier curve. Clinical failure was defined as conversion of osteotomy to total hip replacement (THR). At the latest follow-up of 22 years on the average, 18 patients (19 hips) still had osteotomy and 10 patients (11 hips) had undergone conversion to THR. The life table analysis showed the cumulative proportion of osteotomy with a clinical survivorship of 0.97 at 5 years, 0.75 at 10 and 15 years, and 0.68 at 20 and 25 years after surgery. The cumulative rate of clinical survivorship of osteotomy, as shown by the Kaplan-Meier curve, was 0.89 at 10 years, 0.75 at 20 years and 0.67 at 25 years after surgery. Nineteen patients were satisfied with the osteotomy outcome. The median of Harris hip scores in the patients with osteotomy was 48 points before surgery and 78 points at the latest follow-up. Conversion to THR in 10 patients (11 hips) was done at an average of 12 years after osteotomy. The median values before surgery and at the latest follow-up were: CCD angle, 158° and 118°; Wiberg angle, 13° and 20°; and AHI index, 56 % and 79 %, respectively. The prerequisite for a good result of proximal femoral varus osteotomy is the correct indication, i.e., younger age (18 to 30 years), a lower grade of osteoarthritis, mild dysplasia and a spherical shape of the femoral head. A disadvantage of the procedure is a shortening of the limb. The best indication for femoral varus osteotomy is unilateral coxa valga with a longer leg. This study shows favourable long-term results after isolated proximal femoral varus osteotomy in young adults with developmental dysplasia of the hip. A good function had been preserved in 18 of 28 DDH patients for an average of 22 years.
Ahn, Ji Hyun; Yang, Tae Yeong; Lee, Jang Yun
2016-07-01
To compare the gap change between the pie-crust technique and reduction osteotomy to determine their effects on flexion and extension gaps and their success rates in achieving ligament balancing during total knee arthroplasty. In a prospective randomized controlled trial, 106 total knee arthroplasties were allocated to each group with 53 cases. If there was a narrow medial gap with an imbalance of ≥3 mm after the initial limited medial release, either reduction osteotomy or pie-crust technique was performed. The changes of extension and flexion medial gaps along with the success rate of mediolateral balancing were compared. There was a significant difference in the change of medial gap in knee extension with mean changes of 3.5 ± 0.5 mm and 2.3 ± 0.8 mm in the reduction osteotomy and pie-crust groups, respectively (P < .001). For flexion gap, greater change was found in the pie-crust group compared with the reduction osteotomy group; the mean medial gap changes in knee flexion were 1.1 ± 0.5 mm and 2.3 ± 1.2 mm in the reduction osteotomy and pie-crust groups, respectively. The success rates were 90.6% and 67.9% in reduction osteotomy and pie-crust groups, respectively (P = .007). As an alternative medial release method, reduction osteotomy was more effective in extension gap balancing, and pie-crust technique was more effective in flexion gap balancing. The overall success rate of mediolateral ligament balancing was higher in the reduction osteotomy group than in the pie-crust group. Copyright © 2016 Elsevier Inc. All rights reserved.
Zhang, Yuan Z; Lu, Sheng; Chen, Bin; Zhao, Jian M; Liu, Rui; Pei, Guo X
2011-01-01
Treatment of cubitus varus deformity from a malunited fracture is a challenge. Anatomically accurate correction is the key to obtaining good functional outcomes after corrective osteotomy. The aim of this study was to attempt to increase the accuracy of treatment by use of 3-dimensional (3D) computer-aided design. We describe a novel method for ensuring an accurate osteotomy method in the treatment of cubitus varus deformity in teenagers by means of 3D reconstruction and reverse engineering. Between January 2006 and May 2008, 12 male and 6 female patients with cubitus varus deformities underwent scanning with spiral computed tomography (CT) preoperatively. The mean age was 15.7 years, ranging from 13 to 19 years. Three-dimensional CT image data of the affected and contralateral normal bones of cubitus were transferred to a computer workstation. Three-dimensional models of cubitus were reconstructed by use of MIMICS software. The 3D models were then processed by Imageware software. An osteotomy template that best fitted the angle and range of osteotomy was "reversely" built from the 3D model. These templates were manufactured by a rapid prototyping machine. The osteotomy templates guide the osteotomy of cubitus. An accurate angle of osteotomy was confirmed by postoperative radiography. After 12 to 24 months' follow-up, the mean postoperative carrying angle in 18 patients with cubitus varus deformity was 7.3° (range, 5° to 11°), with a mean correction of 21.9° (range, 12° to 41°). The patient-specific template technique is easy to use, can simplify the surgical act, and generates highly accurate osteotomy in cubitus varus deformity in teenagers. Copyright © 2011 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Mosby, Inc. All rights reserved.
Delgado-Ruiz, R A; Sacks, D; Palermo, A; Calvo-Guirado, J L; Perez-Albacete, C; Romanos, G E
2016-09-01
The aim of this experimental in vitro study was to evaluate the effects of the piezoelectric device in temperature and time variations in standardized osteotomies performed with similar tip inserts in bovine bone blocks. Two different piezosurgical devices were used the OE-F15(®) (Osada Inc., Los Angeles, California, USA) and the Surgybone(®) (Silfradent Inc., Sofia, Forli Cesena, Italy). Serrated inserts with similar geometry were coupled with each device (ST94 insert/test A and P0700 insert/test B). Osteotomies 10 mm long and 3 mm deep were performed in bone blocks resembling type II (dense) and type IV (soft) bone densities with and without irrigation. Thermal changes and time variations were recorded. The effects of bone density, irrigation, and device on temperature changes and time necessary to accomplish the osteotomies were analyzed. Thermal analysis showed significant higher temperatures during piezosurgery osteotomies in hard bone without irrigation (P < 0.05). The type of piezosurgical device did not influence thermal variations (P > 0.05). Time analysis showed that the mean time values necessary to perform osteotomies were shorter in soft bone than in dense bone (P < 0.05). Within the limitations of this in vitro study, it may be concluded that the temperature increases more in piezosurgery osteotomies in dense bone without irrigation; the time to perform the osteotomy with piezosurgery is shorter in soft bone compared to hard bone; and the piezosurgical device have a minimal influence in the temperature and time variations when a similar tip design is used during piezosurgery osteotomies. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.
Bosch osteotomy and scarf osteotomy for hallux valgus correction.
Maffulli, Nicola; Longo, Umile Giuseppe; Oliva, Francesco; Denaro, Vincenzo; Coppola, Cristiano
2009-10-01
Minimally invasive distal metatarsal osteotomies are becoming broadly accepted for correction of hallux valgus. We compared the duration of surgery, the length of hospital stay, the American Orthopaedic Foot and Ankle Society (AOFAS) score, and the Foot and Ankle Outcome Score (FAOS) in 36 patients who underwent a minimal incision subcapital osteotomy of the first metatarsal with 36 matched patients who had hallux valgus corrected by a scarf technique. The minimum follow-up was 2.1 years (mean, 2.5 years; range, 2.1-3.2 years). Patients having the osteotomy had similar AOFAS and FAOS scores with less operating time and earlier discharge. Less operative time may benefit the patients, and earlier discharge has financial implications for the hospital.
A comparison of surgical exposures for posterolateral osteochondral lesions of the talar dome.
Mayne, Alistair I W; Lawton, Robert; Reidy, Michael J; Harrold, Fraser; Chami, George
2018-04-01
Perpendicular access to the posterolateral talar dome for the management of osteochondral defects is difficult. We examined exposure available from each of four surgical approaches. Four surgical approaches were performed on 9 Thiel-embalmed cadavers: anterolateral approach with arthrotomy; anterolateral approach with anterior talo-fibular ligament (ATFL) release; anterolateral approach with antero-lateral tibial osteotomy; and anterolateral approach with lateral malleolus osteotomy. The furthest distance posteriorly allowing perpendicular access with a 2mm k-wire was measured. An anterolateral approach with arthrotomy provided a mean exposure of the anterior third of the lateral talar dome. A lateral malleolus osteotomy provided superior exposure (81.5% vs 58.8%) compared to an anterolateral tibial osteotomy. Only the anterior half of the lateral border of the talar dome could be accessed with an anterolateral approach without osteotomy. A fibular osteotomy provided best exposure to the posterolateral aspect of the talar dome. Copyright © 2016 European Foot and Ankle Society. Published by Elsevier Ltd. All rights reserved.
Roth, K. C.; Walenkamp, M. M. J.; van Geenen, R. C. I.; Reijman, M.; Verhaar, J. A. N.; Colaris, J. W.
2017-01-01
The aim of this study was to identify predictors of a superior functional outcome after corrective osteotomy for paediatric malunited radius and both-bone forearm fractures. We performed a systematic review and meta-analysis of individual participant data, searching databases up to 1 October 2016. Our primary outcome was the gain in pronosupination seen after corrective osteotomy. Individual participant data of 11 cohort studies were included, concerning 71 participants with a median age of 11 years at trauma. Corrective osteotomy was performed after a median of 12 months after trauma, leading to a mean gain of 77° in pronosupination after a median follow-up of 29 months. Analysis of variance and multiple regression analysis revealed that predictors of superior functional outcome after corrective osteotomy are: an interval between trauma and corrective osteotomy of less than 1 year, an angular deformity of greater than 20° and the use of three-dimensional computer-assisted techniques. Level of evidence: II PMID:28891765
Haefeli, Mathias; Schenkel, Matthias; Schumacher, Ralf; Eid, Karim
2017-09-01
Midshaft clavicular fractures are often treated nonoperatively with good reported clinical outcome in a majority of patients. However, malunion with shortening of the affected clavicle is not uncommon. Shortening of the clavicle has been shown to affect shoulder strength and kinematics with alteration of scapular position. Whereas the exact clinical impact of these factors is unknown, the deformity may lead to cosmetic and functional impairment as for example pain with weight-bearing on the shoulder girdle. Other reported complications of clavicular malunion include thoracic outlet syndrome, subclavicular vein thrombosis, and axillary plexus compression. Corrective osteotomy has therefore been recommended for symptomatic clavicular malunions, generally using plain x-rays for planning the necessary elongation. Particularly in malunited multifragmentary fractures it may be difficult to exactly determine the plane of osteotomy intraoperatively to restore the precise anatomic shape of the clavicle. We present a technique for corrective osteotomy using preoperative computer planning and 3-dimensional printed patient-specific intraoperative osteotomy and reduction guides based on the healthy contralateral clavicle.
Seo, Kyung-Won; Nahm, Kyung-Yen; Kim, Seong-Hun; Chung, Kyu-Rhim; Nelson, Gerald
2013-07-01
This article reports the dual function of a double-Y miniplate with a detachable C-tube head (C-chin plate; Jin Biomed Co., Bucheon, Korea) used to fixate an anterior segmental osteotomy and provide skeletal anchorage during orthodontic tooth movement. Cases were selected for this study from patients who underwent anterior segmental osteotomy under local anesthesia. A detachable C-tube head portion was combined with a double-Y chin plate. The double-Y chin plates were fixated between the osteotomy segments and the mandibular base with screws in a conventional way. The C-tube head portion exited the tissue near the mucogingival junction. Biocreative Chin Plates were placed on the anterior segmental osteotomy sites. The device allowed 3 points of fixation: 1, minor postosteotomy vertical adjustment of the segment during healing; 2, minor shift of the midline during healing; and 3, to serve as temporary skeletal anchorage device during the post-anterior segmental osteotomy orthodontic treatment. When tooth movement goals are accomplished, the C-tube head of the chin plate can be easily detached from the fixation miniplate by twisting the head using a Weingart plier under local anesthesia. This dual-purpose device spares the patient from the need for 2 separate installations for stabilization of osteotomy segments. The dual-purpose double-Y miniplate combined with a C-tube head (Biocreative Chin Plate) provided versatile application of 3 points of post-osteotomy fixation and of temporary skeletal anchorage for orthodontic tooth movement.
Zang, Junting; Uchiyama, Katsufumi; Moriya, Mitsutoshi; Li, Zhengwei; Fukushima, Kensuke; Yamamoto, Takeaki; Liu, Jianguo; Feng, Wei; Takahira, Naonobu; Takaso, Masashi
2018-06-01
Intracapsular cuneiform osteotomy was initially introduced to restore the morphology of the proximal femur after slipped capital femoral epiphysis (SCFE). However, whether this procedure results in a higher risk of avascular necrosis (AVN) or lower incidence of cam deformity than in-situ pinning is unclear. The aim of this study was to compare the outcomes of intracapsular cuneiform osteotomy and in-situ pinning to treat SCFE in children. Twenty-three children who suffered from SCFE underwent either intracapsular cuneiform osteotomy (eight patients, eight hips) or in-situ pinning (15 patients, 18 hips) between 2006 and 2014. No patient was lost to follow-up at a mean of 4.5 years. In the osteotomy group, the Japanese Orthopedic Association's hip score system score increased from 50.5 (20-89) to 98.9 (95-100) and from 65.9 (48-90) to 99.0 (44-100) in the in-situ pinning group. On the basis of the slip angle, α angle, and epiphyseal-metaphyseal offset, intracapsular cuneiform osteotomy showed a significantly better result in restoring the morphology of the proximal femur than in-situ pinning (P<0.001). The incidences of AVN, chondrolysis, and lower limb discrepancy were similar between the two groups. On the basis of clinical outcomes, both intracapsular cuneiform osteotomy and in-situ pinning had acceptable abilities to treat SCFE. The incidence of AVN was not related to which technique was used. Osteotomy significantly restored the morphology of the proximal femur.
Hua, Wen-Bin; Zhang, Yu-Kun; Gao, Yong; Liu, Xian-Zhe; Yang, Shu-Hua; Wu, Xing-Huo; Wang, Jing; Yang, Cao
2017-07-15
Retrospective analysis of clinical records. To assess and compare the improvement in sagittal balance after one- or two-level closing wedge osteotomy for correcting thoracolumbar kyphosis secondary to ankylosing spondylitis (AS). Closing wedge osteotomy represents a common approach to correct kyphosis in AS. Although several reports have described the outcomes of one- or two-level closing wedge osteotomy in terms of sagittal parameters, data comparing the outcomes of these procedures are scarce. Between January 2010 and December 2014, 22 patients with AS underwent closing wedge osteotomy (one-level, 12 patients; two-level, 10 patients) for correcting thoracolumbar kyphosis (mean follow-up, 24.8 months; range, 12-60 months). Preoperative and postoperative chin-brow vertical angle, and the sagittal parameters of the vertebral osteotomy segment were documented and compared. Perioperative and postoperative complications were also recorded. The chin-brow vertical angle improved significantly, from 55.0° ± 27.3° to 4.7° ± 4.9° and from 38.2° ± 14.9° to 3.2° ± 5.4° in the one-level and two-level groups, respectively. The total correction (thoracic kyphosis and lumbar lordosis) was 32.8° ± 18.2° and 53.7° ± 9.4° in the one-level and two-level groups, respectively. No death, complete paralysis, or vascular complications occurred during the procedure, but cerebrospinal fluid leak was noted in one and two patients from the one-level and two-level groups, respectively. A distal pedicle screw adjacent to the osteotomy segment became loose during surgery in one patient (one-level group). Postoperatively, no transient neurological deficit, infection, delay union, or loosening or breaking of the internal fixation devices was observed. Osteotomy site fusion was achieved in all patients, and the Oswestry Disability Index scores improved significantly. Closing wedge osteotomy is effective and safe for correcting thoracolumbar kyphosis in patients with AS. Significant correction and improvement in all sagittal parameters were noted in both groups, but two-level closing wedge osteotomy provided better correction. 3.
Rate of Malunion Following Bi-plane Chevron Medial Malleolar Osteotomy.
Bull, Patrick E; Berlet, Gregory C; Canini, Cameron; Hyer, Christopher F
2016-06-01
Access to the medial half of the talus can be challenging even with an osteotomy. Although several techniques are presented in the literature, critical evaluation of fixation, union, and alignment is lacking. The chevron medial malleolar osteotomy provides advantages of perpendicular instrumentation access and wide exposure to the medial talus. Postoperative displacement resulting in malunion, and possibly provoking ankle osteoarthritis, is a known complication. The present study describes our experience with the osteotomy. A consecutive series cohort of 50 bi-plane chevron osteotomies performed from 2004 to 2013 were evaluated. Forty-six were secured using 2 lag screws, and 4 were secured using 2 lag screws and a medial buttress plate. Radiographic studies performed at 2, 6, and 12 weeks and at final follow-up were analyzed for postoperative displacement, malunion, non-union, and hardware-related complications. At initial postoperative follow-up, 47 of 50 had adequate radiographs for review, and 18 of 47 (38.3%) showed some displacement when compared to the initial osteotomy fixation position. By final follow-up, 15 of 50 (30.0%) had measurable incongruence. Hardware removal was performed in 13 (26.0%) cases at an average of 2.4 years postoperation. Bi-plane medial malleolar chevron osteotomy fixed with 2 lag screws showed a 30.0% malunion rate with an average of 2 mm of incongruence on final follow-up radiographs, which is higher than what has been reported in the literature. In our practice, we now use a buttress plate and more recently have eliminated postoperative osteotomy displacement. Level IV, retrospective case series. © The Author(s) 2016.
Lee, K B; Cho, N Y; Park, H W; Seon, J K; Lee, S H
2015-02-01
Moderate to severe hallux valgus is conventionally treated by proximal metatarsal osteotomy. Several recent studies have shown that the indications for distal metatarsal osteotomy with a distal soft-tissue procedure could be extended to include moderate to severe hallux valgus. The purpose of this prospective randomised controlled trial was to compare the outcome of proximal and distal Chevron osteotomy in patients undergoing simultaneous bilateral correction of moderate to severe hallux valgus. The original study cohort consisted of 50 female patients (100 feet). Of these, four (8 feet) were excluded for lack of adequate follow-up, leaving 46 female patients (92 feet) in the study. The mean age of the patients was 53.8 years (30.1 to 62.1) and the mean duration of follow-up 40.2 months (24.1 to 80.5). After randomisation, patients underwent a proximal Chevron osteotomy on one foot and a distal Chevron osteotomy on the other. At follow-up, the American Orthopedic Foot and Ankle Society (AOFAS) hallux metatarsophalangeal interphalangeal (MTP-IP) score, patient satisfaction, post-operative complications, hallux valgus angle, first-second intermetatarsal angle, and tibial sesamoid position were similar in each group. Both procedures gave similar good clinical and radiological outcomes. This study suggests that distal Chevron osteotomy with a distal soft-tissue procedure is as effective and reliable a means of correcting moderate to severe hallux valgus as proximal Chevron osteotomy with a distal soft-tissue procedure. ©2015 The British Editorial Society of Bone & Joint Surgery.
Takeuchi, Ryohei; Woon-Hwa, Jung; Ishikawa, Hiroyuki; Yamaguchi, Yuichiro; Osawa, Katsunari; Akamatsu, Yasushi; Kuroda, Koichi
2017-12-01
The purpose of this study was to compare the mechanical fixation strengths of anteromedial and medial plate positions in osteotomy, and clarify the effects of bone substitute placement into the osteotomy site. Twenty-eight sawbone tibia models were used. Four different models were prepared: Group A, the osteotomy site was open and the plate position was anteromedial; Group B, bone substitutes were inserted into the osteotomy site and the plate position was anteromedial; Group C, the osteotomy site was open and the plate position was medial; and Group D, bone substitutes were inserted into the osteotomy site and the plate position was medial. The loading condition ranged from 0 to 800N and one hertz cycles were applied. Changes of the tibial posterior slope angle (TPS), stress on the plate and lateral hinge were measured. The changes in the TPS and the stress on the plate were significantly larger in Group A than in Group C. These were significantly larger in Group A than in Group B, and in Group C than in Group D. There was no significant difference between Group B and Group D, and no significant difference between knee flexion angles of 0° and 10°. Stress on the lateral hinge was significantly smaller when bone substitute was used. A medial plate position was biomechanically superior to an anteromedial position if bone substitute was not used. Bone substitute distributed the stress concentration around the osteotomy gap and prevented an increase in TPS angle regardless of the plate position. Copyright © 2017. Published by Elsevier B.V.
The dawn of computer-assisted robotic osteotomy with ytterbium-doped fiber laser.
Sotsuka, Yohei; Nishimoto, Soh; Tsumano, Tomoko; Kawai, Kenichiro; Ishise, Hisako; Kakibuchi, Masao; Shimokita, Ryo; Yamauchi, Taisuke; Okihara, Shin-ichiro
2014-05-01
Currently, laser radiation is used routinely in medical applications. For infrared lasers, bone ablation and the healing process have been reported, but no laser systems are established and applied in clinical bone surgery. Furthermore, industrial laser applications utilize computer and robot assistance; medical laser radiations are still mostly conducted manually nowadays. The purpose of this study was to compare the histological appearance of bone ablation and healing response in rabbit radial bone osteotomy created by surgical saw and ytterbium-doped fiber laser controlled by a computer with use of nitrogen surface cooling spray. An Ytterbium (Yb)-doped fiber laser at a wavelength of 1,070 nm was guided by a computer-aided robotic system, with a spot size of 100 μm at a distance of approximately 80 mm from the surface. The output power of the laser was 60 W at the scanning speed of 20 mm/s scan using continuous wave system with nitrogen spray level 0.5 MPa (energy density, 3.8 × 10(4) W/cm(2)). Rabbits radial bone osteotomy was performed by an Yb-doped fiber laser and a surgical saw. Additionally, histological analyses of the osteotomy site were performed on day 0 and day 21. Yb-doped fiber laser osteotomy revealed a remarkable cutting efficiency. There were little signs of tissue damage to the muscle. Lased specimens have shown no delayed healing compared with the saw osteotomies. Computer-assisted robotic osteotomy with Yb-doped fiber laser was able to perform. In rabbit model, laser-induced osteotomy defects, compared to those by surgical saw, exhibited no delayed healing response.
Proximal metatarsal osteotomies: a comparative geometric analysis conducted on sawbone models.
Nyska, Meir; Trnka, Hans-Jörg; Parks, Brent G; Myerson, Mark S
2002-10-01
We evaluated the change in position of the first metatarsal head using a three-dimensional digitizer on sawbone models. Crescentic, closing wedge, oblique shaft (Ludloff 8 degrees and 16 degrees), reverse oblique shaft (Mau 8 degrees and 16 degrees), rotational "Z" (Scarf), and proximal chevron osteotomies were performed and secured using 3-mm screws. The 16 degrees Ludloff provided the most lateral shift (9.5 mm) and angular correction (14.5 degrees) but also produced the most elevation (1.4 mm) and shortening (2.9 mm). The 8 degrees Ludloff provided lateral and angular corrections similar to those of the crescentic and closing wedge osteotomies with less elevation and shortening. Because the displacement osteotomies (Scarf, proximal chevron) provided less angular correction, the same lateral displacement, and less shortening than the basilar angular osteotomies, based upon this model they can be more reliably used for a patient with a mild to moderate deformity, a short first metatarsal, or an intermediate deformity with a large distal metatarsal articular angle. These results can serve as recommendations for selecting the optimal osteotomy with which to correct a deformation.
Evaluation of Hallux Valgus Correction With Versus Without Akin Proximal Phalanx Osteotomy.
Shibuya, Naohiro; Thorud, Jakob C; Martin, Lanster R; Plemmons, Britton S; Jupiter, Daniel C
2016-01-01
Although the efficacy of Akin proximal phalanx closing wedge osteotomy as a sole procedure for correction of hallux valgus deformity is questionable, when used in combination with other osseous corrective procedures, the procedure has been believed to be efficacious. However, a limited number of comparative studies have confirmed the value of this additional procedure. We identified patients who had undergone osseous hallux valgus correction with first metatarsal osteotomy or first tarsometatarsal joint arthrodesis with (n = 73) and without (n = 81) Akin osteotomy and evaluated their radiographic measurements at 3 points (preoperatively, within 3 months after surgery, and ≥6 months after surgery). We found that those people who had undergone the Akin procedure tended to have a larger hallux abduction angle and a more laterally deviated tibial sesamoid position preoperatively. Although the radiographic correction of the deformity was promising immediately after corrective surgery with the Akin osteotomy, maintenance of the correction was questionable in our cohort. The value of additional Akin osteotomy for correction of hallux valgus deformity is uncertain. Published by Elsevier Inc.
[Distal femoral osteotomy using a lateral opening wedge technique].
Feucht, M J; Mehl, J; Forkel, P; Imhoff, A B; Hinterwimmer, S
2017-08-01
To shift the weight-bearing axis of the lower limb medially by opening a lateral-based metaphyseal osteotomy at the distal femur. Femoral-based valgus malalignment and symptomatic lateral unicompartimental osteoarthritis, lateral hyperpression syndrome, cartilage therapy of the lateral compartment, lateral meniscal replacement/transplantation, medial instability with valgus thrust, reconstruction of the medial collateral ligament, patellar instability and/or maltracking. Advanced cartilage damage (>grade 2) or subtotal meniscal loss of the medial compartment, age >65 years (relative), nicotine abuse, body mass index >30, flexion contracture >25°, corrections with a wedge base >10 mm in case of congenital deformities, inflammatory or septic arthritis, severe osteoporosis. Lateral approach to the distal femur; biplanar osteotomy (frontal + axial osteotomy), gradual opening of the osteotomy, osteotomy fixation with a locking plate. Free range of motion. Partial weight bearing with 20 kg for 2 weeks, followed by progressive weight bearing thereafter. Mean improvement of knee scores from 20-30 points and mean 10-year survival rate of 80% in patients with lateral unicompartimental osteoarthritis. Mean complication rate of 9%.
[Derotational subtrochanteric osteotomy of the femur in celebral palsy patients].
Schejbalová, A
2006-10-01
Derotational subtrochanteric osteotomy as an independent surgical procedure is one of the options for treatment of hip anteversion in adolescent patients with cerebral palsy. In other indications it is one of combined surgical procedures for hip joint reconstruction. During the 1992-2005 period, derotational subtrochanteric osteotomy was indicated in 74 cases, in ambulatory patients 9 to 18 years old, with diplegic or hemiplegic cerebral plasy. In 63 cases it was used a part of combined surgery. The postoperative evaluation was based on clinical and radiographic findings, migration rates and Wiberg's CE angle obtained at 2 and 6 months, and then at each 6 months following surgery. Derotational subtrochanteric osteotomy alone always resulted in improvement of clinical status and an increase in Wiberg's CE angle by 10 degrees on average. Patients with marginal or high dislocation showed best results when the hip joint was reconstructed before the age of 9 years. In three hips a recurrent dislocation occurred gradually within one year of surgery. These patients fell back to stage II of the Vojta classification found preoperatively. During the next three years, three more hips developed a recurrent dislocation and two showed lateralization (20 %). Reconstructive surgery for neurogenic dislocation in patients over 10 years of age is associated with problems, as is derotation combined with varus osteotomy in abductor insufficiency. On the other hand, derotational subtrochanteric osteotomy alone is indicated particularly in children over 10 years, in whom it corrects hip joint anteversion and improves gait. Complete reconstructive procedures should be considered in the first 10 years of life when neither the femoral head nor the acetabulum are markedly changed. Derotative osteotomy alone is preferred to procedures combined with varus osteotomy. In walking adolescent patients, derotative femoral osteotomy alone is recommended; this can exceptionally be used at earlier age if marked asymmetry is present.
Chevron osteotomy in patients with scheduled osteotomy of the medial malleolus.
Gül, Murat; Yavuz, Umut; Çetinkaya, Engin; Aykut, Ümit Selçuk; Özkul, Barış; Kabukçuoğlu, Yavuz Selim
2015-01-01
The aim of the present study was to evaluate intermediate-term outcomes of Chevron osteotomy for treatment of osteochondral lesions of the talus with mosaicplasty and to assess its effect on surgery and whether it reduces complications that might occur intraoperatively. The present study included a total of 42 patients (31 men, 11 women) who underwent Chevron osteotomy of the medial malleolus and who had been followed for more than 2 years. Mean age of the patients was 34 years (range: 18-54 years). Preoperatively, size of the lesions was measured in millimeters in the coronal and sagittal planes using magnetic resonance imaging (MRI). The angle between the osteotomy with the long axis of the tibia was measured on the coronal plane, the angle between the arms and the angle for the screws to be directed to the osteotomy line were measured on the sagittal plane on the postoperative images. Nonunion, malunion, and complications from the screws were evaluated from X-ray images taken at the final follow-up. Mean duration for follow-up was 31.4 years (range: 24-46). On the X-ray images taken at the final follow-up, no distraction, migration of the distal part, or rotation was observed. Only 1 patient experienced radiological non-union. Mean duration to union was 5.8 weeks (range: 4-14 weeks). Screws of 8 patients were removed at an average of 7.4 months (range: 5-11 months). The angle between the osteotomy line and long axis of the tibia was 29.0°±6.5°, the angel between the osteotomy arms on the sagittal plane was 74.7°±8.3°, and the direction angle of the screws on the coronal plane was 85.7°±5.9°. Chevron osteotomy is an assistive surgical method used for treatment of osteochondral lesions located in the medial talar joint surface (TOL) which provides fast anatomical healing because it allows efficient fixation due to its geometry.
Advantages of a Beveled Osteotomy on the Zygomatic Arch During Reduction Malarplasty.
Lee, Tae Sung; Park, Sanghoon
2017-10-01
During a conventional reduction malarplasty procedure, a dual approach including intraoral incisions and preauricular incisions is made to reduce both the zygomatic body and arch. As the preauricular approach is performed to cut the zygomatic arch, there are several remarkable advantages that can be achieved by simply beveling the osteotomy anteriorly on the zygomatic arch. This has the benefits of enhancing bone union by the increase in cross-sectional area for bone contact, decreasing palpability on the osteotomy site, placing the osteotomy more posteriorly, preventing depression in the anterior malar region, and reducing the need for metal fixtures.
[Bone surgery for unstable hips in patients with cerebral palsy].
Poul, J; Pesl, M; Pokorná, M
2004-01-01
The aim of this retrospective study was to compare the efficacy of femoral osteotomy alone with that of osteotomy combined with an acetabular procedure in patients with unstable hips due to spastic cerebral palsy. Sixty-one hip joints in 50 patients who had shown distinct subluxation or dislocation of the joint were operated on. Eleven patients underwent bilateral surgery. Before bone surgery, soft-tissue release involving both the flexors and adductors was performed on 19 hips. Femoral osteotomy alone was performed on 29 hip joints and combined femoral and pelvic osteotomy was carried out on 32 joints.Twelve resections of the proximal femur in seven patients were evaluated as a separate group. All treated hip joints were assessed by clinical and radiographic examination at a follow-up of more than 5 years. The skiagraphs taken in a strictly neutral position of the lower limbs before surgery and at the final examination were evaluated on the basis of Reimers's migration index and Wiberg's centre-edge angle. The locomotor abilities of each child were categorized according to the Vojta scoring system for locomotor development. The range of motion in the treated hip joint was assessed using the standard S. F. T. R. method. The results obtained were statistically analyzed by the Kruskal- Wallis, one-way ANOVA test. A comparison of the results of femoral osteotomy alone with those of combined femoral and pelvic osteotomy showed that the post-operative values of the migration index and centre-edge angle, as compared with the pre-operative ones, were statistically higher (p<0.05) in the latter. In a long-term perspective, the surgery had no adverse effects on a natural development of locomotor abilities of the child. The children had higher scores by the modified Vojta rating system. There was no change in the range of motion in the treated hip joints after the operation. In 28, out of the 32 joints treated by combined femoral and pelvic osteotomy, Salter osteotomy was performed and it showed a high efficacy in providing hip joint stability. The main emphasis during surgery was placed on the maximum acetabular rotation laterally. Femoral osteotomy alone was less effective in providing hip joint stability; in addition, in order to achieve this, tilting of the proximal fragment to a varus position was generally higher than in combined operations. In three patients this treatment resulted in fixed adduction of the hip joint with negative consequences for movement. In the treatment of unstable hip joints a combination of varus derotation femoral osteotomy and pelvic osteotomy provides better containment of the joint than femoral osteotomy alone.
Hallux valgus correction using transarticular lateral release with distal chevron osteotomy.
Choi, Young Rak; Lee, Ho Seong; Jeong, Jae Jung; Kim, Sang Woo; Jeon, In-Ho; Lee, Dong Ho; Lee, Woo Chun
2012-10-01
Transarticular lateral release through a medial incision can avoid a dorsal incision. This study investigated outcomes following hallux valgus correction using transarticular lateral release, distal chevron metatarsal osteotomy and Akin phalangeal osteotomy through one medial incision. Between June 2004 and May 2009, a single surgeon performed a transarticular lateral release, distal chevron metatarsal osteotomy and Akin phalangeal osteotomy through one medial incision for hallux valgus on a total of 103 feet of 68 patients. The average patient age at the time of surgery was 51 years, and the average followup was 27 months. The average preoperative and final followup results were: 1) hallux valgus angle improvement from 29 degrees to 5 degrees, 2) intermetatarsal angle from 13 degrees to 5 degrees and 3) medial sesamoid bone position from 3 to 1 (p < 0.05 for each variable). The average AOFAS scores were improved from 49 to 92, and the VAS pain scores were improved from 7 to 1 (p < 0.05 for both variables). No patient had a serious complication such as infection, avascular necrosis, nonunion, transfer-metatarsalgia, or first metatarsophalangeal joint arthritis. Hallux valgus correction using transarticular lateral release, distal chevron metatarsal osteotomy and Akin phalangeal osteotomy through one medial incision was found to be effective and safe. The advantages include that the procedure is simple, early ambulation is possible, and there is no dorsal scarring.
Ghazipour, Ali; Alani, Nadereh; Ghavami Lahiji, Shervin; Akbari Dilmaghani, Nader
2014-10-01
Lateral osteotomies are used in rhinoplasty to narrow the nasal bones, close the open roof deformity after hump removal, and achieve symmetry of an asymmetrical framework. But this procedure causes periorbital oedema & ecchymosis. Different techniques have been described for lateral osteotomy. To compare the postoperative ecchymosis and oedema after buccal sulcus lateral osteotomy versus intranasal lateral osteotomy. In a prospective experimental study, buccal sulcus approach was performed on the right side and an intranasal approach performed on the left side of patients randomly. Then blind analysis of postoperative photographs was performed to determine the incidence of oedema and ecchymosis on each side. Fifty patients were enrolled in the study after exclusion of unfit patients. On the right side (buccal approach osteotomies), a significantly lower incidence of upper and lower eyelid oedema and upper eyelid ecchymosis was seen on both the 2nd day and after 7th day (P < 0.05). The odds ratio of progression of ecchymosis was 2.66 (OR = 2.66, 95% CI: 1.09-5.52, p = 0.048) in intranasal group compare to buccal sulcus group. No significant complication observed. The buccal sulcus approach is a safe method for lateral osteotomy with a lower rate of postoperative oedema and ecchymosis and no significant complications. Copyright © 2014 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.
Schoonover, Mike J; Whitfield, Chase T; Rochat, Mark C; Streeter, Robert N; Sippel, Kate
2016-09-20
To report the successful surgical correction of severe bilateral metacarpophalangeal valgus angular limb deformities in a seven-month-old intact male alpaca cria using curved osteotomies stabilized with type II external skeletal fixation. Using a 21 mm crescentic shaped oscillating saw blade, bilateral osteotomies were performed in the distal metaphyses of the fused third and fourth metacarpal bones to correct valgus angular limb deformity of the metacarpophalangeal joints. Axial alignment of each limb was achieved by medially rotating the distal metacarpus in the frontal plane along the curved osteotomies. The osteotomies were stabilized using type II external skeletal fixators. The alpaca was immediately weight-bearing following the surgical procedure and no to minimal lameness was observed during healing of the osteotomies. Evaluation at five and 10 months following the surgery demonstrated acceptable axial alignment in the left forelimb while moderate to severe varus deformity (overcorrection) was observed in the right. Curved osteotomy of the distal metacarpus stabilized with type II external skeletal fixation can provide a favourable outcome in older alpaca crias affected with metacarpophalangeal angular limb deformities. Placement of the distal transfixation pins relative to the metacarpal physes should be carefully evaluated as overcorrection is possible, especially if growthpotential remains in only one physis of the fused third and fourth metacarpal bones.
Accuracy of experimental mandibular osteotomy using the image-guided sagittal saw.
Pietruski, P; Majak, M; Swiatek-Najwer, E; Popek, M; Szram, D; Zuk, M; Jaworowski, J
2016-06-01
The aim of this study was to perform an objective assessment of the accuracy of mandibular osteotomy simulations performed using an image-guided sagittal saw. A total of 16 image-guided mandibular osteotomies were performed on four prefabricated anatomical models according to the virtual plan. Postoperative computed tomography (CT) image data were fused with the preoperative CT scan allowing an objective comparison of the results of the osteotomy executed with the virtual plan. For each operation, the following parameters were analyzed and compared independently twice by two observers: resected bone volume, osteotomy trajectory angle, and marginal point positions. The mean target registration error was 0.95±0.19mm. For all osteotomies performed, the mean difference between the planned and actual bone resection volumes was 8.55±5.51%, the mean angular deviation between planned and actual osteotomy trajectory was 8.08±5.50°, and the mean difference between the preoperative and the postoperative marginal point positions was 2.63±1.27mm. In conclusion, despite the initial stages of the research, encouraging results were obtained. The current limitations of the navigated saw are discussed, as well as the improvements in technology that should increase its predictability and efficiency, making it a reliable method for improving the surgical outcomes of maxillofacial operations. Copyright © 2016 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.
The Bare Area of the Proximal Ulna: An Anatomic Study With Relevance to Chevron Osteotomy.
Ao, Rongguang; Zhang, Xu; Li, Dejian; Chen, Fancheng; Zhou, Jianhua; Yu, Baoqing
2017-06-01
A chevron osteotomy of the ulna is widely used to obtain intra-articular access to the elbow in the treatment of type C distal humerus fractures. The trochlear notch of the proximal ulna is divided into 2 articular parts by the "bare area." Ideally, the olecranon osteotomy should be centered on the bare area to minimize damage to the joint cartilage. The goals of this study were to describe the anatomy of the bare area and design an ideal chevron-shaped osteotomy. We dissected 38 cadaver elbows and measured the width of the bare area, the distance between the tip of the triceps insertion and the area on the olecranon cortex corresponding to the bare area. We then designed a chevron osteotomy to stay within the bare area and measured the distance from the tip of the triceps insertion to the osteotomy apex as well as the angle of the osteotomy plane and the angle of the chevron cuts. The bare area existed in all 38 cadavers. The mean longitudinal and transverse widths were 4.0 mm (range, 1.0-8.6 mm) and 19.0 mm (range, 16.9-23.8 mm), respectively. The mean distance between the tip of the triceps insertion and the area on the olecranon cortex corresponding to the bare area was 19.0 mm (range, 16.0-23.0 mm). The mean transverse and longitudinal widths of the cortical notch were 3.0 mm (range, 1.6-4.5 mm) and 8.0 mm (range, 6.5-14.8 mm), respectively. The mean distance between the tip of the triceps insertion and the osteotomy apex was 22.0 mm (range, 18.0-24.0 mm) and the mean angle between the osteotomy surface and the vertical plane corresponding to the tangent plane was 20° (range, 10° to 25°). The mean angle of the V shape was 140° (range, 130° to 150°). Using the narrowest edge lacking cartilage (lateral or medial side) as a point of reference to locate the bare area, the designed chevron osteotomy entered the joint in the bare area in most specimens and decreased associated damage to the joint cartilage. This study describes the anatomy of the bare area and the design of the ideal chevron-shaped osteotomy to treat type C distal humerus fractures. Copyright © 2017 American Society for Surgery of the Hand. Published by Elsevier Inc. All rights reserved.
Zeng, Yan; Chen, Zhongqiang; Guo, Zhaoqing; Qi, Qiang; Li, Weishi; Sun, Chuiguo
2013-10-01
A clinical retrospective study. To analyze the complications and relevant management of the correction procedure for focal kyphosis. The treatment of focal kyphosis is a difficult problem in spine surgery. The potential complications of surgery should be considered cautiously and managed positively. Eighty-one patients with focal kyphosis were treated by posterior osteotomy and correction. The etiology was posttraumatic in 31 cases, healed tuberculosis in 31 cases, congenital in 17 cases, and iatrogenic in 2 cases. The surgical procedures were pedicle subtraction osteotomy in 19 cases, posterior osteotomy with anterior opening-posterior closing correction in 23 cases, and posterior vertebral column resection with dual axial rotation correction in 39 cases. The intraoperative and postoperative complications were summarized, and the corresponding management was described in detail. The average follow-up time was 31 months. Among patients who underwent pedicle subtraction osteotomy, the intraoperative and postoperative complications included 3 cases of dural tear and 1 case of wound infection. For posterior osteotomy with anterior opening-posterior closing correction, the complications included 4 cases of dural tear, 1 case of wound infection, and 1 case of instrumentation loosening and recurrence of kyphosis . For posterior vertebral column resection with dual axial rotation correction, the complications included 3 cases of dural tear, 5 cases of nerve root injury, 1 case of titanium mesh loosening, 1 case of osteotomy segment migration, 2 cases of transient neurological compromise, and 1 case of instrumentation loosening and kyphosis recurrence. All the complications were treated positively and pertinently. During the posterior osteotomy and correction of focal kyphosis, the risk of surgery increases along with the more severe deformity and the more complicated surgical procedure. However, most complications do not significantly affect the outcome if treated appropriately.
Lai, Mun Chun; Rikhraj, Inderjeet Singh; Woo, Yew Lok; Yeo, William; Ng, Yung Chuan Sean; Koo, Kevin
2018-03-01
Minimally invasive surgeries have gained popularity due to less soft tissue trauma and better wound healing. To date, limited studies have compared the outcomes of percutaneous and open osteotomies. This study aims to investigate the clinical and radiological outcomes of percutaneous chevron-Akin osteotomies vs open scarf-Akin osteotomies at 24-month follow-up. We reviewed a prospectively collected database in a tertiary hospital hallux valgus registry. Twenty-nine feet that underwent a percutaneous technique were matched to 58 feet that underwent open scarf and Akin osteotomies. Clinical outcome measures assessed included visual analog scale (VAS) scores, American Orthopaedic Foot & Ankle Society Hallux Metatarsophalangeal-Interphalangeal score (AOFAS Hallux MTP-IP), and Short Form 36 (SF-36) Health Survey. Radiological outcomes included hallux valgus angle (HVA) and intermetatarsal angle (IMA). All patients were prospectively followed up at 6 and 24 months. Both groups showed comparable clinical and radiological outcomes at the 24-month follow-up. However, the percutaneous group demonstrated less pain in the perioperative period ( P < .001). There were significant differences in the change in HVA between the groups but comparable radiological outcomes in IMA at the 24-month follow-up. The percutaneous group demonstrated shorter length of operation ( P < .001). There were no complications in the percutaneous group but 3 wound complications in the open group. We conclude that clinical and radiological outcomes of third-generation percutaneous chevron-Akin osteotomies were comparable with open scarf and Akin osteotomies at 24 months but with significantly less perioperative pain, shorter length of operation, and less risk of wound complications. Level III, retrospective comparative series.
Sharma, Krishn M; Parks, Brent G; Nguyen, Augustine; Schon, Lew C
2005-10-01
A change in screw orientation in fixing the chevron proximal first metatarsal osteotomy was noted anecdotally to improve fixation strength. The authors hypothesized that plantar-to-dorsal screw orientation would be more stable than the conventional dorsal-to-plantar screw orientation for fixation of the chevron osteotomy. The purpose of this study was to determine if the load-to-failure and stiffness of the chevron type proximal first metatarsal osteotomy stabilized using plantar-to-dorsal screw fixation were greater than with the more conventional dorsal-to-plantar screw fixation method. One foot from each of eight matched cadaver pairs was randomly assigned to one of two groups: 1) fixation with a dorsal-to-plantar lag screw or 2) fixation with a plantar-to-dorsal lag screw. A proximal chevron osteotomy was then created using standard technique and the metatarsal was fixed according to previously established method. The bone was potted in polyester resin, and the construct was fitted into a materials testing system machine in which load was applied to the plantar aspect of the metatarsal until failure. The two groups were compared using a two-tailed Student t test. The average load-to-failure and stiffness of the chevron osteotomy fixed with the plantar-to-dorsal lag screw were significantly greater (p < 0.05) than the group fixed with more conventional dorsal-to-plantar lag screws. Plantar-to-dorsal screw orientation was more stable than the conventional dorsal-to-plantar screw orientation for fixation of the proximal chevron osteotomy. Plantar-to-dorsal screw orientation should be considered when using the chevron proximal first metatarsal osteotomy.
Aydogan, Umur; Roush, Evan P; Moore, Blake E; Andrews, Seth H; Lewis, Gregory S
2017-04-01
Destruction of the normal metatarsal arch by a long metatarsal is often a cause for metatarsalgia. When surgery is warranted, distal oblique, or proximal dorsiflexion osteotomies of the long metatarsal bones are commonly used. The plantar fascia has anatomical connection to all metatarsal heads. There is controversial scientific evidence on the effect of plantar fascia release on forefoot biomechanics. In this cadaveric biomechanical study, we hypothesized that plantar fascia release would augment the plantar metatarsal pressure decreasing effects of two common second metatarsal osteotomy techniques. Six matched pairs of foot and ankle specimens were mounted on a pressure mat loading platform. Two randomly assigned surgery groups, which had received either distal oblique, or proximal dorsiflexion osteotomy of the second metatarsal, were evaluated before and after plantar fasciectomy. Specimens were loaded up to a ground reaction force of 400 N at varying Achilles tendon forces. Average pressures, peak pressures, and contact areas were analyzed. Supporting our hypothesis, average pressures under the second metatarsal during 600 N Achilles load were decreased by plantar fascia release following proximal osteotomy (p < 0.05). However contrary to our hypothesis, peak pressures under the second metatarsal were significantly increased by plantar fascia release following modified distal osteotomy, under multiple Achilles loading conditions (p < 0.05). Plantar fasciotomy should not be added to distal metatarsal osteotomy in the treatment of metatarsalgia. If proximal dorsiflexion osteotomy would be preferred, plantar fasciotomy should be approached cautiously not to disturb the forefoot biomechanics. © 2016 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 35:800-804, 2017. © 2016 Orthopaedic Research Society. Published by Wiley Periodicals, Inc.
Vlachopoulos, Lazaros; Schweizer, Andreas; Meyer, Dominik C; Gerber, Christian; Fürnstahl, Philipp
2017-08-01
The surgical treatment of malunions after midshaft clavicle fractures is associated with a number of potential complications and the surgical procedure is challenging. However, with appropriate and meticulous preoperative surgical planning, the surgical correction yields satisfactory results. The purpose of this study was to provide a guideline and detailed overview for the computer-assisted planning and 3-dimensional (3D) correction of malunions of the clavicle. The 3D bone surface models of the pathologic and contralateral sides were created on the basis of computed tomography data. The computer-assisted assessment of the deformity, the preoperative plan, and the design of patient-specific guides enabling compression plating are described. We demonstrate the benefit and versatility of computer-assisted planning for corrective osteotomies of malunions of the midshaft clavicle. In combination with patient-specific guides and compression plating technique, the correction can be performed in a more standardized fashion. We describe the determination of the contact-optimized osteotomy plane. An osteotomy along this plane facilitates the correction and enlarges the contact between the fragments at once. We further developed a technique of a stepped osteotomy that is based on the calculation of the contact-optimized osteotomy plane. The stepped osteotomy enables the length to be restored without the need of structural bone graft. The application of the stepped osteotomy is presented for malunions of the clavicle with shortening and excessive callus formation. The 3D preoperative planning and patient-specific guides for corrective osteotomies of the clavicle may help reduce the number of potential complications and yield results that are more predictable. Copyright © 2017 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.
Piezosurgery versus conventional osteotomy in orthognathic surgery: a paradigm shift in treatment.
Bertossi, Dario; Lucchese, Alessandra; Albanese, Massimo; Turra, Matteo; Faccioni, Fiorenzo; Nocini, Pierfrancesco; Rodriguez Y Baena, Ruggero
2013-01-01
The aim of the study was to compare in a randomized controlled clinical trial the use of the piezoelectric osteotomy as an alternative to the conventional approach in terms of surgery time, intraoperative blood loss, cut quality, nerve injury, and costs.One hundred ten patients who had orthognathic surgery procedures with bimaxillary osteotomy were divided into 2 groups: group A was treated with a piezosurgery device, and group B, with a reciprocating saw and bur.The piezosurgical bone osteotomy permitted individualized cut designs. The surgical time in group A was reduced, with a mean for the mandibular osteotomy (1 side) between 3 minutes 31 seconds and 5 minutes 2 seconds, whereas in group B, the surgical time was between 7 minutes 23 seconds and 10 minutes 22 seconds. The surgical time in group A for the Le Fort I osteotomy was between 5 minutes 17 seconds and 7 minutes 55 seconds in group A and between 8 minutes 38 seconds and 15 minutes 11 seconds in group B. All patients in group A had a low blood loss (<300 mL) versus patients of group B who had a medium to high blood loss (medium loss: 400 mL, high loss: >500 mL). Inferior alveolar nerve sensation was retained in 98.2% of group A versus 92.7% in group B at 6 months postoperative testing.Piezoelectric osteotomy reduced surgical time, blood loss, and inferior alveolar nerve injury in bimaxillary osteotomy. Absence of macrovibrations makes the instrument more manageable and easy to use and allows greater intraoperative control with higher safety in cutting in difficult anatomical regions.
Shariff, Raheel; Attar, Fahad; Osarumwene, Donald; Siddique, Rehan; Attar, Gulam Dastagir
2009-04-01
Controversy exists with regard to the effects of chevron osteotomy on blood supply and subsequent development of avascular necrosis (AVN) of the first metatarsal head. The aim of this study was to assess the incidence of avascular necrosis in our centre following chevron osteotomy for hallux valgus, using bone scintigraphy. Thirty nine patients who had a chevron osteotomy for treatment of hallux valgus were prospectively studied. Mean follow-up was 14 months. Bone scintigraphy was used to assess metatarsal head perfusion at an average 8.5 weeks post operatively. Three patients (7.7%) showed abnormal bone scan around the metatarsal head. Further evaluation of these patients did not show any sign of AVN. We conclude there appears to be a risk of circulatory disturbance to the metatarsal head following chevron osteotomy of the first metarsal (7.7% in this study); however this does not translate into clinically significant AVN.
Cooper, Minton Truitt; Coughlin, Michael J
2012-10-01
The aim of this study was to compare a distal subcapital oblique fifth metatarsal with a distal chevron osteotomy for correction of bunionette deformity. Twenty cadaveric feet were randomly assigned to undergo either a subcapital oblique or chevron osteotomy of the distal fifth metatarsal. Radiographic measurements, including 4-5 intermetatarsal angle (IMA), fifth metatarsophalangeal angle (5-MPA) and foot width, were compared between the 2 groups. Foot width and 5-MPA was significantly decreased in both groups with no difference between the groups. The 4-5 IMA was not significantly altered in either group. Decrease in foot width and 5-MPA was similarly achieved with either distal chevron or subcapital oblique osteotomy of the fifth metatarsal in normal cadaveric specimens. No significant difference was found between the 2 techniques in any of the radiographic parameters measured.
Cranial nerve injury after Le Fort I osteotomy.
Kim, J-W; Chin, B-R; Park, H-S; Lee, S-H; Kwon, T-G
2011-03-01
A Le Fort I osteotomy is widely used to correct dentofacial deformity because it is a safe and reliable surgical method. Although rare, various complications have been reported in relation to pterygomaxillary separation. Cranial nerve damage is one of the serious complications that can occur after Le Fort I osteotomy. In this report, a 19-year-old man with unilateral cleft lip and palate underwent surgery to correct maxillary hypoplasia, asymmetry and mandibular prognathism. After the Le Fort I maxillary osteotomy, the patient showed multiple cranial nerve damage; an impairment of outward movement of the eye (abducens nerve), decreased vision (optic nerve), and paraesthesia of the frontal and upper cheek area (ophthalmic and maxillary nerve). The damage to the cranial nerve was related to an unexpected sphenoid bone fracture and subsequent trauma in the cavernous sinus during the pterygomaxillary osteotomy. Copyright © 2010 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.
Niki, Yasuo; Harato, Kengo; Nagai, Katsuya; Suda, Yasunori; Nakamura, Masaya; Matsumoto, Morio
2015-12-01
This study aimed to assess the effects of down-sizing and lateralizing of the tibial component (reduction osteotomy) on gap balancing in TKA, and the clinical feasibility of an uncemented modular trabecular metal tibial tray in this technique. Reduction osteotomy was performed for 39 knees of 36 patients with knee OA with a mean tibiofemoral angle of 21° varus. In 20 knees, appropriate gap balance was achieved by release of the deep medial collateral ligament alone. Flexion gap imbalance could be reduced by approximately 1.7° and 2.8° for 4-mm osteotomy and 8-mm osteotomy, respectively. Within the first postoperative year, clinically-stable tibial component subsidence was observed in 9 knees, but it was not progressive, and the clinical results were excellent at a mean follow-up of 3.3 years. Copyright © 2015 Elsevier Inc. All rights reserved.
Lengthening of the shortened first metatarsal after Wilson's osteotomy for hallux valgus.
Singh, D; Dudkiewicz, I
2009-12-01
Metatarsalgia is a recognised complication following iatrogenic shortening of the first metatarsal in the management of hallux valgus. The traditional surgical treatment is by shortening osteotomies of the lesser metatarsals. We describe the results of lengthening of iatrogenic first brachymetatarsia in 16 females. A Scarf-type osteotomy was used in the first four cases and a step-cut of equal thicknesses along the axis of the first metatarsal was performed in the others. The mean follow-up was 21 months (19 to 26). Relief of metatarsalgia was obtained in the six patients in whom 10 mm of lengthening had been achieved, compared to only 50% relief in those where less than 8 mm of lengthening had been gained. One-stage step-cut lengthening osteotomy of the first metatarsal may be preferable to shortening osteotomies of the lesser metatarsals in the treatment of metatarsalgia following surgical shortening of the first metatarsal.
Lee, Moses; Guyton, Gregory P; Zahoor, Talal; Schon, Lew C
2016-01-01
As a standard open approach, the lateral oblique incision has been widely used for calcaneal displacement osteotomy. However, just as with other orthopedic procedures that use an open approach, complications, including wound healing problems and neurovascular injury in the heel, have been reported. To help avoid these limitations, a percutaneous technique using a Shannon burr for calcaneal displacement osteotomy was introduced. However, relying on a free-hand technique without direct visualization at the osteotomy site has been a major obstacle for this technique. To address this problem, we developed a technical tip using a reference Kirschner wire. A reference Kirschner wire technique provides a reliable and accurate guide for minimally invasive calcaneal displacement osteotomy. Also, the technique should be easy to learn for surgeons new to the procedure. Copyright © 2016 American College of Foot and Ankle Surgeons. Published by Elsevier Inc. All rights reserved.
Guo, Zhao-Zhong; Liu, Xue; Li, Yan; Deng, Yan-Fang; Wang, Yang
2007-02-01
To evaluate the clinical applicability of Piezosurgery osteotomy: a new safe technique in managing long standing maxillary fractures. 12 patients with long-standing maxillary fractures were surgically treated using Le Fort I osteotomy. During operation, Piezosurgery osteotomy was used for bone cutting and splitting. After repositioning, the bone segments were rigidly fixed with micro Ti-plate, Ti-mesh. All the patients were followed up for 6 to 12 months, and the functional and esthetic results were evaluated. Ultrasonic microvibrations allow accurate bone cutting without oscillating injuries to the soft tissue. All the wounds healed primarily without complications. The postoperative occlusion and appearance were satisfactory. Maximal recovery of mastication and appearance can be achieved by using Piezosurgery osteotomy with fixation materials such as Ti-plates and Ti-meshes in selected patients with long-standing maxillary fractures.
Koshino, T; Tsuchiya, K
1979-03-01
High tibial osteotomies were performed on 136 osteoarthritic knees for correction of varus deformity. Before osteotomy all patients experienced moderate or severe pain, and the knees showed lateral thrust on weight-bearing. The patients were followed up for one to five years. Marked relief of pain was obtained in 112 knees, and the patients were satisfied with the result of operation in 122. These painless knees showed no lateral thrust, and in the majority the deformity had been adequately corrected, with post-operative femoro-tibial angles (standing) ranging from 165° to 174°. Four of 28 knees with femoro-tibial angles of 175° to 179°, when measured one year after operation, showed recurrence of varus deformity three years after osteotomy. Preoperative ranges of knee motion were well maintained after osteotomy even when arthrotomy had also been undertaken. Intra-articular assessment in two patients, several years after operation, showed that the most degenerated portions of the articular surface were completely covered by a fibrocartilagenous layer, with no bare bone.High tibial osteotomy is most effective in osteoarthritic knees with varus deformity, when correction is made to a femoro-tibial angle (standing) of 170° (10° valgus).
Koshino, T; Tsuchiya, K
1979-01-01
High tibial osteotomies were performed on 136 osteoarthritic knees for correction of varus deformity. Before osteotomy all patients experienced moderate or severe pain, and the knees showed lateral thrust on weight-bearing. The patients were followed up for one to five years. Marked relief of pain was obtained in 112 knees, and the patients were satisfied with the result of operation in 122. These painless knees showed no lateral thrust, and in the majority the deformity had been adequately corrected, with post-operative femoro-tibial angles (standing) ranging from 165 degrees to 174 degrees. Four of 28 knees with femoro-tibial angles of 175 degrees to 179 degrees, when measured one year after operation, showed recurrence of varus deformity three years after osteotomy. Preoperative ranges of knee motion were well maintained after osteotomy even when arthrotomy had also been undertaken. Intra-articular assessment in two patients, several years after operation, showed that the most degenerated portions of the articular surface were completely covered by a fibrocartilagenous layer, with no bare bone. High tibial osteotomy is most effective in osteoarthritic knees with varus deformity, when correction is made to a femoro-tibial angle (standing) of 170 degrees (10 degrees valgus).
Osteotomy around young deformed knees: 38-year super-long-term follow-up to detect osteoarthritis.
Koshino, Tomihisa
2010-02-01
Since 1969 corrective osteotomy has been performed at our institute in young patients (under 40 years) with bowlegs, knock knees and flexion or rotational deformities around the knee. Fifty-seven knees (29 left, 28 right) of 45 patients (19 boys, 26 girls) were followed-up for a period ranging from 30 to 38 years in seven patients with seven knees, from 20 to 29 years in nine patients with 11 knees, and from ten to 19 years in 29 patients with 39 knees. Supracondylar femoral osteotomy was performed on 12 knees (11 patients), high tibial osteotomy above the tibial tuberosity on eight knees (six patients) and below the tuberosity on 37 knees (28 patients). At the final follow-up (age range 42-73 years), all of the deformities were satisfactorily corrected, with no symptoms apart from nine knees, seven of which had dull pain after strenuous sport with osteophytes, etc. in the radiograph. Total knee arthroplasty was performed in the remaining two knees, at ten and 26 years, respectively, after the initial osteotomy. Osteoarthritis developed in the contralateral knee to the initial osteotomy in two patients after 34 years at age 73 and after 33 years at age 67.
Sallent, A; Vicente, M; Reverté, M M; Lopez, A; Rodríguez-Baeza, A; Pérez-Domínguez, M; Velez, R
2017-10-01
To assess the accuracy of patient-specific instruments (PSIs) versus standard manual technique and the precision of computer-assisted planning and PSI-guided osteotomies in pelvic tumour resection. CT scans were obtained from five female cadaveric pelvises. Five osteotomies were designed using Mimics software: sacroiliac, biplanar supra-acetabular, two parallel iliopubic and ischial. For cases of the left hemipelvis, PSIs were designed to guide standard oscillating saw osteotomies and later manufactured using 3D printing. Osteotomies were performed using the standard manual technique in cases of the right hemipelvis. Post-resection CT scans were quantitatively analysed. Student's t -test and Mann-Whitney U test were used. Compared with the manual technique, PSI-guided osteotomies improved accuracy by a mean 9.6 mm (p < 0.008) in the sacroiliac osteotomies, 6.2 mm (p < 0.008) and 5.8 mm (p < 0.032) in the biplanar supra-acetabular, 3 mm (p < 0.016) in the ischial and 2.2 mm (p < 0.032) and 2.6 mm (p < 0.008) in the parallel iliopubic osteotomies, with a mean linear deviation of 4.9 mm (p < 0.001) for all osteotomies. Of the manual osteotomies, 53% (n = 16) had a linear deviation > 5 mm and 27% (n = 8) were > 10 mm. In the PSI cases, deviations were 10% (n = 3) and 0 % (n = 0), respectively. For angular deviation from pre-operative plans, we observed a mean improvement of 7.06° (p < 0.001) in pitch and 2.94° (p < 0.001) in roll, comparing PSI and the standard manual technique. In an experimental study, computer-assisted planning and PSIs improved accuracy in pelvic tumour resections, bringing osteotomy results closer to the parameters set in pre-operative planning, as compared with standard manual techniques. Cite this article : A. Sallent, M. Vicente, M. M. Reverté, A. Lopez, A. Rodríguez-Baeza, M. Pérez-Domínguez, R. Velez. How 3D patient-specific instruments improve accuracy of pelvic bone tumour resection in a cadaveric study. Bone Joint Res 2017;6:577-583. DOI: 10.1302/2046-3758.610.BJR-2017-0094.R1. © 2017 Sallent et al.
Chen, Weng-Pin; Tai, Ching-Lung; Tan, Chih-Feng; Shih, Chun-Hsiung; Hou, Shun-Hsin; Lee, Mel S
2005-01-01
Transtrochanteric rotational osteotomy is a technical demanding procedure. Currently, the pre-operative planning of the transtrochanteric rotational osteotomy is mostly based on X-ray images. The surgeons would need to reconstruct the three-dimensional structure of the femoral head and the necrosis in their mind. This study develops a simulation platform using computer models based on the computed tomography images of the femoral head to evaluate the degree to which transtrochanteric rotational osteotomy moves the region of osteonecrotic femoral head out of the weight-bearing area in stance and gait cycle conditions. Based on this simulation procedure, the surgeons would be better informed before the surgery and the indication can be carefully assessed. A case with osteonecrosis involving 15% of the femoral head was recruited. Virtual models with the same size lesion but at different locations were devised. Computer models were created using SolidWorks 2000 CAD software. The area ratio of weight-bearing zone occupied by the necrotic lesion on two conditions, stance and gait cycle, were measured after surgery simulations. For the specific case and virtual models devised in this study, computer simulation showed the following two findings: (1) The degrees needed to move the necrosis out of the weight-bearing zone in stance were less by anterior rotational osteotomy as compared to that of posterior rotational osteotomy. However, the necrotic region would still overlap with the weight-bearing area during gait cycle. (2) Because the degrees allowed for posterior rotation were less restricted than anterior rotation, posterior rotational osteotomies were often more effective to move the necrotic region out of the weight-bearing area during gait cycle. The computer simulation platform by registering actual CT images is a useful tool to assess the direction and degrees needed for transtrochanteric rotational osteotomy. Although the results indicated that anterior rotational osteotomy was more effective to move the necrosis out of the weight-bearing zone in stance for models devised in this study, in circumstances where the necrotic region located at various locale, considering the limitation of anterior rotation inherited with the risk of vascular compromise, it might be more beneficial to perform posterior rotation osteotomy in taking account of gait cycle.
Matsuda, Dean K.; Matsuda, Nicole A.
2015-01-01
Beyond the recent expansion of extra-articular hip arthroscopy into the peri-trochanteric and subgluteal space, this instructional course lecture introduces three innovative procedures: endoscopy-assisted periacetabular osteotomy, closed derotational proximal femoral osteotomy and endoscopic pubic symphysectomy. Supportive rationale, evolving indications, key surgical techniques and emerging outcomes are presented for these innovative less invasive procedures. PMID:27011827
Konopka, Joseph F.; Gomoll, Andreas H.; Thornhill, Thomas S.; Katz, Jeffrey N.; Losina, Elena
2015-01-01
Background: Surgical options for the management of medial compartment osteoarthritis of the varus knee include high tibial osteotomy, unicompartmental knee arthroplasty, and total knee arthroplasty. We sought to determine the cost-effectiveness of high tibial osteotomy and unicompartmental knee arthroplasty as alternatives to total knee arthroplasty for patients fifty to sixty years of age. Methods: We built a probabilistic state-transition computer model with health states defined by pain, postoperative complications, and subsequent surgical procedures. We estimated transition probabilities from published literature. Costs were determined from Medicare reimbursement schedules. Health outcomes were measured in quality-adjusted life-years (QALYs). We conducted analyses over patients’ lifetimes from the societal perspective, with health and cost outcomes discounted by 3% annually. We used probabilistic sensitivity analyses to account for uncertainty in data inputs. Results: The estimated discounted QALYs were 14.62, 14.63, and 14.64 for high tibial osteotomy, unicompartmental knee arthroplasty, and total knee arthroplasty, respectively. Discounted total direct medical costs were $20,436 for high tibial osteotomy, $24,637 for unicompartmental knee arthroplasty, and $24,761 for total knee arthroplasty (in 2012 U.S. dollars). The incremental cost-effectiveness ratio (ICER) was $231,900 per QALY for total knee arthroplasty and $420,100 per QALY for unicompartmental knee arthroplasty. Probabilistic sensitivity analyses showed that, at a willingness-to-pay (WTP) threshold of $50,000 per QALY, high tibial osteotomy was cost-effective 57% of the time; total knee arthroplasty, 24%; and unicompartmental knee arthroplasty, 19%. At a WTP threshold of $100,000 per QALY, high tibial osteotomy was cost-effective 43% of time; total knee arthroplasty, 31%; and unicompartmental knee arthroplasty, 26%. Conclusions: In fifty to sixty-year-old patients with medial unicompartmental knee osteoarthritis, high tibial osteotomy is an attractive option compared with unicompartmental knee arthroplasty and total knee arthroplasty. This finding supports greater utilization of high tibial osteotomy for these patients. The cost-effectiveness of high tibial osteotomy and of unicompartmental knee arthroplasty depend on rates of conversion to total knee arthroplasty and the clinical outcomes of the conversions. Level of Evidence: Economic Level II. See Instructions for Authors for a complete description of levels of evidence. PMID:25995491
Nassif, Nader A; Schoenecker, Perry L; Thorsness, Robert; Clohisy, John C
2012-11-07
Proximal femoral deformities and overcorrection of the acetabulum both can result in secondary femoroacetabular impingement and suboptimal clinical results after periacetabular osteotomy. The purpose of the present study was to determine the rate of complications, the need for reoperations, radiographic correction, and hip function among patients who underwent periacetabular osteotomy and combined femoral head-neck osteochondroplasty as compared with those who underwent periacetabular osteotomy alone. Patients who underwent periacetabular osteotomy with or without osteochondroplasty of the femoral head-neck junction were evaluated retrospectively after a minimum duration of follow-up of two years. We compared the two groups with regard to the modified Harris hip score, radiographic correction, complications, and reoperations. Forty patients (forty hips) who underwent periacetabular osteotomy in conjunction with a femoral head-neck osteochondroplasty were compared with forty-eight patients (forty-eight hips) who underwent an isolated periacetabular osteotomy. Patients were evaluated after a mean duration of follow-up of 3.4 years (range, 2.0 to 9.7 years). Preoperatively, the modified Harris hip score (and standard deviation) was 64.3 ± 13.2 for the study group and 63.2 ± 13.4 for the comparison group. At the time of the latest follow-up, the modified Harris hip score was not significantly different between the study group and the comparison group (p = 0.17). Patients demonstrated equivalent preoperative deformities and postoperative acetabular radiographic parameters. There was a significant decrease in the alpha angle and improvement in head-neck offset in the study group. There was one reoperation for secondary impingement and/or labral pathology in the study group, compared with four reoperations in the comparison group. There were no adhesions requiring surgery, femoral neck fractures, instances of osteonecrosis, or increases in heterotopic ossification in the study group. Femoral head-neck junction osteochondroplasty performed concurrently with a periacetabular osteotomy for the treatment of symptomatic acetabular dysplasia and associated femoral head-neck junction deformities is not associated with an increased complication rate. This combined procedure provides effective correction of associated femoral head-neck deformities and produces similar early functional outcomes when compared with isolated periacetabular osteotomy. Therapeutic Level III.
Proximal tibial osteotomy. A survivorship analysis.
Ritter, M A; Fechtman, R A
1988-01-01
Proximal tibial osteotomy is generally accepted as a treatment for the patient with unicompartmental arthritis. However, a few reports of the long-term results of this procedure are available in the literature, and none have used the technique known as survivorship analysis. This technique has an advantage over conventional analysis because it does not exclude patients for inadequate follow-up, loss to follow-up, or patient death. In this study, survivorship analysis was applied to 78 proximal tibial osteotomies, performed exclusively by the senior author for the correction of a preoperative varus deformity, and a survival curve was constructed. It was concluded that the reliable longevity of the proximal tibial osteotomy is approximately 6 years.
Two surgical approaches to fracture malunion repair.
Rahal, Sheila C; Teixeira, Carlos R; Pereira-Júnior, Oduvaldo C M; Vulcano, Luiz C; Aguiar, Antonio J A; Rassy, Fabrício B
2008-12-01
Two birds were presented with malunion fractures. The first was a young toco toucan (Ramphastos toco) with malunion of the tarsometatarsus that was treated by an opening-wedge corrective osteotomy and an acrylic-pin external skeletal fixator (type II) to stabilize the osteotomy. The second bird was an adult southern caracara (Caracara plancus) with radial and ulnar malunion that was treated by closing-wedge osteotomies. Stabilization of the osteotomy sites was accomplished through a bone plate fixed cranially on the ulna with 6 cortical screws and an interfragmentary single wire in radius. In both cases, the malunion was corrected, but the manus of the southern caracara was amputated because of carpal joint luxation that induced malposition of the feathers.
Evaluation of an Innovative Fixation System for Chevron Bunionectomy.
Bennett, Gordon L; Sabetta, James A
2016-02-01
Distal chevron metatarsal osteotomy bunionectomy is a commonly performed procedure for the treatment of mild to moderate hallux valgus deformity. There are several different methods to stabilize this osteotomy. We evaluated a new intramedullary plate system. We prospectively evaluated 57 consecutive patients who underwent distal chevron metatarsal osteotomy bunionectomy utilizing the intramedullary plate system. All operative procedures were performed by the senior author. Patients were evaluated preoperatively, postoperatively, and at a final follow-up utilizing the American Orthopaedic Foot & Ankle Society (AOFAS) forefoot scoring system. Sixty-three surgically corrected feet went on to heal the osteotomy site. There were no hardware failures. We had one patient that expressed mild discomfort over the plate. All patients significantly improved their AOFAS scores compared with preoperative values. We concluded that the distal chevron metatarsal osteotomy bunionectomy resulted in excellent function and pain relief. The new plate system was a reliable and stable implant with a low profile, good strength, and ease of use. Level IV, retrospective case series. © The Author(s) 2015.
The effect of plate position and size on tibial slope in high tibial osteotomy: a cadaveric study.
Rubino, L Joseph; Schoderbek, Robert J; Golish, S Raymond; Baumfeld, Joshua; Miller, Mark D
2008-01-01
Opening wedge high tibial osteotomies are performed for degenerative changes and varus. Opening wedge osteotomies can change proximal tibial slope in the sagittal plane, possibly imparting stability in the ACL-deficient knee. The aim of this study was to assess the effect of plate position and size on change in tibial slope. Eight cadaveric knees underwent opening wedge high tibial osteotomy with Puddu plates of each different size. Plates were placed anterior, central, and posterior for each size used. Lateral radiographs were obtained. Tibial slope was measured and compared with baseline slope. Tibial slope was affected by plate position (P < 0.05) and size (P < 0.001). Smaller, posterior plates had less effect on tibial slope. However, anterior and central plates increased tibial slope over all plate sizes (P < 0.05). This study found that tibial slope increases with opening wedge high tibial osteotomy. Larger corrections and anterior placement of the plate are associated with larger increases in slope.
Gao, Quan-Wen; Song, Hui-Feng; Xu, Ming-Huo; Liu, Chun-Ming; Chai, Jia-Ke
2013-11-01
To explore the clinical application of mandibular-driven simultaneous maxillo-mandihular distraction to correct hemifacial microsomia with rapid prototyping technology. The patient' s skull resin model was manufactured with rapid prototyping technology. The osteotomy was designed on skull resin model. According to the preoperative design, the patients underwent Le Fort I osteotomy and mandibular ramus osteotomy. The internal mandible distractor was embedded onto the osteotomy position. The occlusal titanium pin was implanted. Distraction were carried out by mandibular-driven simultaneous maxillo-mandihular distraction 5 days after operation. The distraction in five patients was complete as designed. No infection and dysosteogenesis happened. The longest distance of distraction was 28 mm, and the shortest distance was 16 mm. The facial asymmetry deformity was significantly improved at the end of distraction. The ocelusal plane of patients obviously improved. Rapid prototyping technology is helpful to design precisely osteotomy before operation. Mandibular-driven simultaneous maxillo-mandibular distraction can correct hemifacial microsomia. It is worth to clinical application.
Matsumoto, Takumi; Gross, Christopher E; Parekh, Selene G
2018-03-01
Distal Chevron osteotomy is a well-established surgical procedure for mild to moderate hallux valgus deformity. Many methods have been described for fixation of osteotomy site; secure fixation, enabling large displacement of the metatarsal head, is one of the essentials of this procedure. The purpose of the present study was to evaluate the short-term radiographic outcome of a distal Chevron osteotomy using an intramedullary plate for the correction of hallux valgus deformity. The present study evaluated 37 patients (40 feet) who underwent distal Chevron osteotomy using an intramedullary plate by periodic radiographs obtained preoperatively and at 4 weeks, 8 weeks, 3 months, and 6 months postoperatively. Correction of the hallux valgus angle averaged 17.8°, intermetatarsal angle 7.4°, distal metatarsal articular angle 2.7°, and sesamoid position 1.4 stages at 3 months postoperatively. The average lateral shift of the capital fragment was 6.5 mm. All patients achieved bone union, and there were no cases of dislocation, displacement, or avascular necrosis of the metatarsal head fragment. In conclusion, a distal Chevron osteotomy using an intramedullary plate was a favorable method for the correction of mild to moderate hallux valgus deformity. Level IV: Case series.
Takegami, Yasuhiko; Seki, Taisuke; Amano, Takafumi; Higuchi, Yoshitoshi; Komatsu, Daigo; Nishida, Yoshihiro; Ishiguro, Naoki
2017-08-01
Although many patients use the internet to access health-related information, the quality and the reliability of the information is highly inconsistent. Periacetabular osteotomy (PAO) is one of the surgical procedures for hip dysplasia. However, medical information on PAO is limited on the internet. This study aims to evaluate the quality and reliability of information available on PAO on the internet in Japan. A web search was conducted on two search engines for the following terms: "hip osteotomy," "pelvic osteotomy," and "osteotomy for hip preservation" in Japanese. In total, we found 120 websites. To determine the quality and reliability of information on each website, we used the Health on the Net Foundation (HON) score, the Brief DISCERN score, and an osteotomy-specific content (OSC) score. After eliminating duplicate websites, we reviewed 49 unique websites. Only three websites (6.1%) had good reliability, as indicated by their HON scores. Twelve websites (24.4%) had good-quality information, as measured by their Brief DISCERN scores. As evaluated by their OSC scores, physician websites were found to be biased toward etiology and surgical indication and did not provide information on the complications of procedures. Non-physician websites were generally insufficient. The information about PAO on the internet is, therefore, unreliable and of poor-quality for Japanese patients.
External osteotomy in rhinoplasty: Piezosurgery vs osteotome.
Tirelli, Giancarlo; Tofanelli, Margherita; Bullo, Federica; Bianchi, Max; Robiony, Massimo
2015-01-01
To achieve the desired outcome in rhinoplasty depends on many factors. Osteotomy and surgical reshaping of nasal bones are important steps that require careful planning and execution. The availability of different tools raises the question of which one provides significant advantages for both technique and surgical outcome. Our prospective randomized pilot study compared the outcome of post-traumatic rhinoplasty performed with two different external techniques: ultrasound osteotomic cut using the Piezosurgery Medical Device (Mectron, Carasco, Italy) and traditional external osteotomy. Forty-four lateral osteotomies of the nasal wall were performed in twenty-two patients. In twelve patients the osteotomies were conducted with a 2-mm traditional osteotome (control group), while in the remaining ten patients these were done with the Piezosurgery Medical Device (experimental group). At the postoperative evaluation, significantly lower pain, edema and ecchymosis were noticed in the experimental group (p<0.05). Moreover, the endoscopic evaluation showed fewer mucosal injuries in the experimental group (p<0.05), whereas bleeding, symmetry of the pyramid and presence of external scars, were similar in the two groups. In the present study, Piezosurgery Medical Device allowed for safe lateral osteotomies in rhinoplasty preliminarily demonstrating the potential to reduce some of the most frequent complications of rhinoplasty. Copyright © 2015 Elsevier Inc. All rights reserved.
Heinemann, Friedhelm; Hasan, Istabrak; Kunert-Keil, Christiane; Götz, Werner; Gedrange, Tomas; Spassov, Alexander; Schweppe, Janine; Gredes, Tomasz
2012-03-20
Over the past decade, coinciding with the appearance of a number of new ultrasonic surgical devices, there has been a marked increase in interest in the use of ultrasound in oral surgery and implantology as alternative osteotomy method. The aim of this study was the comparison of the effect of osteotomies performed using ultrasonic surgery (Piezosurgery(®)), sonic surgery SONICflex(®) and the conventional bur method on the heat generation within the bone underneath the osteotomy and light-microscopy observations of the bone at different cutting positions in porcine mandibular segments. It was found that the average heat generated by SONICflex(®) sonic device was close to that by conventional rotary bur (1.54-2.29°C), whereas Piezosurgery(®) showed a high generated heat up to 18.17°C. Histological investigations of the bone matrix adjacent to the defect radius showed intact osteocytes with all three instruments and similar wide damage diameter at the bottom region. SONICflex(®) showed smooth cutting surfaces with minimal damage in the upper defect zone. Finally, presented results showed that sonic surgery performed with SONICflex(®) is an alternative osteotomy method and can be used as an alternative to the conventional bur method. Copyright © 2011 Elsevier GmbH. All rights reserved.
Elmalı, Nurzat; Esenkaya, Irfan; Can, Murat; Karakaplan, Mustafa
2013-12-01
We compared clinical and radiological results of two proximal tibial osteotomy (PTO) techniques: monoplanar medial open-wedge osteotomy and biplanar retrotubercle medial open-wedge osteotomy, stabilised by a wedged plate. We evaluated 88 knees in 78 patients. Monoplanar medial open-wedge PTO was performed on 56 knees in 50 patients with a mean age of 55 ± 9 years. Biplanar retrotubercle medial open-wedge PTO was performed on 32 knees in 28 patients with a mean age of 57 ± 7 years. Mean follow-up periods were 40.6 ± 7 months for the monoplanar PTO group and 38 ± 5 months for the biplanar retrotubercle PTO group. Clinical outcome was evaluated using the hospital for special surgery scoring system, and radiological outcome was evaluated by the measurements of femorotibial angle (FTA), patellar height and tibial slope changes. In both groups, post-operative HSS scores increased significantly. No significant difference was found between groups in FTA alteration, but the FTA decreased significantly in both groups. Patellar index ratios decreased significantly in the monoplanar PTO group (Insall-Salvati Index by 0.07, Blackburne-Peel Index by 0.07), but not in the biplanar retrotubercle PTO group. Tibial slopes were increased significantly in the monoplanar PTO group, but not in the retrotubercle PTO group. Biplanar retrotubercle medial open-wedge osteotomy and monoplanar medial open-wedge osteotomy are both clinically effective for the treatment for varus gonarthrosis. Retrotubercle osteotomy also prevents patella infera and tibial slope changes radiologically.
Schuh, Reinhard; Hofstaetter, Jochen Gerhard; Benca, Emir; Willegger, Madeleine; von Skrbensky, Gobert; Zandieh, Shahin; Wanivenhaus, Axel; Holinka, Johannes; Windhager, Reinhard
2014-05-01
The proximal chevron osteotomy provides high correctional power. However, relatively high rates of dorsiflexion malunion of up to 17 % are reported for this procedure. This leads to insufficient weight bearing of the first ray and therefore to metatarsalgia. Recent biomechanical and clinical studies pointed out the importance of rigid fixation of proximal metatarsal osteotomies. Therefore, the aim of the present study was to compare biomechanical properties of fixation of proximal chevron osteotomies with variable locking plate and cancellous screw respectively. Ten matched pairs of human fresh frozen cadaveric first metatarsals underwent proximal chevron osteotomy with either variable locking plate or cancellous screw fixation after obtaining bone mineral density. Biomechanical testing included repetitive plantar to dorsal loading from 0 to 31 N with the 858 Mini Bionix(®) (MTS(®) Systems Corporation, Eden Prairie, MN, USA). Dorsal angulation of the distal fragment was recorded. The variable locking plate construct reveals statistically superior results in terms of bending stiffness and dorsal angulation compared to the cancellous screw construct. There was a statistically significant correlation between bone mineral density and maximum tolerated load until construct failure occurred for the screw construct (r = 0.640, p = 0.406). The results of the present study indicate that variable locking plate fixation shows superior biomechanical results to cancellous screw fixation for proximal chevron osteotomy. Additionally, screw construct failure was related to levels of low bone mineral density. Based on the results of the present study we recommend variable locking plate fixation for proximal chevron osteotomy, especially in osteoporotic bone.
Vincenti, S; Knell, S; Pozzi, A
2017-04-01
Caudal cruciate ligament injury can be a complication following tibial plateau leveling osteotomy (TPLO) (Slocum und Slocum, 1993) especially if the post-operative Tibial Plateau Angle (TPA) is less than 5 degree. We describe a case of negative TPA associated with partial cranial and caudal ligament rupture treated with a center of rotation of angulation (CORA) based cranial tibial opening wedge osteotomy and tibial tuberosity transposition. A 13 kg, mixed breed dog was presented for right pelvic limb lameness. Radiographically a bilateral patella baja and a malformed tibia tuberosity along with a bilateral TPA of -8 degree were detected. Arthroscopically a partial rupture of the cranial and caudal cruciate ligaments were found. A cranial tibial opening wedge osteotomy of 23 degree and a fibular ostectomy were performed. The osteotomy was fixed with a 8 holes ALPS 9 (KYON, Switzerland) and a 3-holes 2.0mm UniLock plate (Synthes, Switzerland). Then a proximal tibial tuberosity transposition of 10mm was performed and fixed with a pin and tension band construct. The postoperative TPA was 15 degree. The radiographic controls at 6, 10 weeks, 6 months and 1 year after surgery revealed an unchanged position of the implants and progressive healing of the osteotomies. At the 6 and 12 months recheck evaluation the dog had no evidence of lameness or stifle pain and radiographs revealed complete healing of the osteotomy site and no implant failure. The diaphyseal CORA based osteotomy allowed accurate correction of a proximal tibial deformity associated with negative TPA.
Changes in ankle joint motion after Supramalleolar osteotomy: a cadaveric model.
Kim, Hak Jun; Yeo, Eui Dong; Rhyu, Im Joo; Lee, Soon-Hyuck; Lee, Yeon Soo; Lee, Young Koo
2017-09-09
Malalignment of the ankle joint has been found after trauma, by neurological disorders, genetic predisposition and other unidentified factors, and results in asymmetrical joint loading. For a medial open wedge supramalleolar osteotomy(SMO), there are some debates as to whether concurrent fibular osteotomy should be performed. We assessed the changes in motion of ankle joint and plantar pressure after supramalleolar osteotomy without fibular osteotomy. Ten lower leg specimens below the knee were prepared from fresh-frozen human cadavers. They were harvested from five males (10 ankles)whose average age was 70 years. We assessed the motion of ankle joint as well as plantar pressure for SS(supra-syndesmotic) SMO and IS(intra-syndesmotic) SMO. After the osteotomy, each specimen was subjected to axial compression from 20 N preload to 350 N representing half-body weight. For the measurement of the motion of ankle joint, the changes in gap and point, angles in ankle joint were measured. The plantar pressure were also recorded using TekScan sensors. The changes in the various gap, point, and angles movements on SS-SMO and IS-SMO showed no statistically significant differences between the two groups. Regarding the shift of plantar center of force (COF) were noted in the anterolateral direction, but not statistically significant. SS-SMO and IS-SMO with intact fibula showed similar biomechanical effect on the ankle joint. We propose that IS-SMO should be considered carefully for the treatment of osteoarthrosis when fibular osteotomy is not performed because lateral cortex fracture was less likely using the intrasyndesmosis plane because of soft tissue support.
Zhu, Ming; Liu, Fei; Zhou, Chaozheng; Lin, Li; Zhang, Yan; Chai, Gang; Xie, Le; Qi, Fazhi; Li, Qingfeng
2018-04-11
Augmented reality (AR)-based navigation surgery has evolved to be an advanced assisted technology. The aim of this study is to manifest the accuracy of AR navigation for the intraoperative mandibular angle osteotomy by comparing the navigation with other interventional techniques. A retrospective study was conducted with 93 post-surgical patients with mandibular angle hypertrophy admitted at our plastic and reconstructive surgery department between September 2011 and June 2016. Thirty-one patients received osteotomy conducted using a navigation system based on augmented reality (AR group), 28 patients received osteotomy conducted using individualised templates (IT group) and the remaining 34 patients received osteotomy performed by free hand (free-hand group). The post-operative computed tomography (CT) images were reviewed and analysed by comparing with pre-surgical planning generated by three-dimensional (3D) software. The preparation time, cutting time, whole operating time and discrepancy in osteotomy lines were measured. The preparation time was much shorter for the free-hand group than that for the AR group and the IT group (P < 0.01). However, no significant difference in the whole operating time was observed among the three groups (P > 0.05). In addition, the discrepancy in osteotomy lines was lower for the AR group and in the IT group than for the free-hand group (P < 0.01). The navigation system based on AR has a higher accuracy, more reliability and better user friendliness for some particular clinical procedures than for other techniques, which has a promising clinical prospect. Copyright © 2018. Published by Elsevier Ltd.
Bae, Dae Kyung; Lee, Jong Whan; Cho, Seong Jin; Song, Sang Jun
2017-01-01
Purpose To compare navigation and weight bearing radiographic measurements of mechanical axis (MA) before and after closed wedge high tibial osteotomy (HTO) and to evaluate post-osteotomy changes in MA assessed during application of external varus or valgus force. Materials and Methods Data from 30 consecutive patients (30 knees) who underwent computer-assisted closed-wedge HTO were prospectively analyzed. Pre- and postoperative weight bearing radiographic evaluation of MA was performed. Under navigation guidance, pre- and post-osteotomy MA values were measured in an unloaded position. Any change in the post-osteotomy MA in response to external varus or valgus force, which was named as dynamic range, was evaluated with the navigation system. The navigation and weight bearing radiographic measurements were compared. Results Although there was a positive correlation between navigation and radiographic measurements, the reliability of navigation measurements of coronal alignment was reduced after osteotomy and wedge closing. The mean post-osteotomy MA value measured with the navigation was 3.5°±0.8° valgus in an unloaded position. It was 1.3°±0.8° valgus under varus force and 5.8°±1.1° valgus under valgus force. The average dynamic range was >±2°. Conclusions Potential differences between the postoperative MAs assessed by weight bearing radiographs and the navigation system in unloaded position should be considered during computer-assisted closed wedge HTO. Care should be taken to keep the dynamic range within the permissible range of alignment goal in HTO. PMID:28854769
Martini, Markus; Röhrig, Andreas; Reich, Rudolf Hermann; Messing-Jünger, Martina
2017-03-01
Cranioplasty of patients with craniosynostosis requires rapid, precise and gentle osteotomy of the skull to avoid complications and benefit the healing process. The aim of this prospective clinical study was to compare two different methods of osteotomy. Piezosurgery and conventional osteotomy were compared using an oscillating saw and high speed drill while performing cranioplasties with fronto-orbital advancement. Thirty-four children who required cranioplasty with fronto-orbital advancement were recruited consecutively. The operations were conducted using piezosurgery or a conventional surgical technique, alternately. Operative time, blood count, CRP and transfusion rate, as well as soft tissue injuries, postoperative edema, pain development and secondary bone healing were investigated. The average age of patients was 9.7 months. The following indications for craniosynostosis were surgically corrected: trigonocephaly (23), anterior plagiocephaly (8), brachycephaly (1), and syndromic craniosynostosis (2). Piezosurgery was utilized in 18 cases. There were no group differences with regard to the incidence of soft tissue injuries (dura, periorbita), pain, swelling, blood loss or bony integration. The duration of osteotomy was significantly longer in the piezosurgery group, leading to slightly increased blood loss, while the postoperative CRP increase was higher using the conventional method. The piezosurgery method is a comparatively safe surgical method for conducting osteotomy during cranioplasty. With regard to soft tissue protection and postoperative clinical course, the same procedural precautions and controls are necessary as those needed for conventional methods. The osteotomy duration is considerably longer using piezosurgery, although it is accompanied by lower initial postoperative CRP values. Copyright © 2016 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.
Park, Chul Hyun; Lee, Woo-Chun
We compared the results of proximal chevron osteotomy and double metatarsal osteotomy for hallux valgus with an increased distal metatarsal articular angle (DMAA). From October 2008 to December 2012, first metatarsal osteotomies were performed in 64 patients (69 feet) with symptomatic hallux valgus associated with an increased DMAA. Proximal chevron with Akin osteotomy and lateral soft tissue release was performed in 46 feet (PCO group); double metatarsal osteotomy and Akin osteotomy without lateral soft tissue release was performed in 23 feet (DMO group). Clinical assessments were performed using the American Orthopaedic Foot and Ankle Society (AOFAS) scale and visual analog scale (VAS). The hallux valgus angles, intermetatarsal angles, sesamoid positions, metatarsus adductus angles, and DMAAs were compared at different postoperative times. Postoperative shortening of first the metatarsal and complications were compared. The mean AOFAS scale and VAS scores showed significant improvement in both groups after surgery; however, no significant difference was observed between the 2 groups. The immediate postoperative hallux valgus angle and sesamoid position were significantly larger in DMO group; however, no intergroup difference was observed at the last follow-up visit, with the hallux valgus angle gradually increasing in the PCO group. The postoperative DMAA was significantly smaller in the DMO group. The mean shortening of the first metatarsal after surgery was significantly larger in the DMO group than in the PCO group. Transfer metatarsalgia developed in 1 foot (2.2%) in the PCO group and 2 feet (8.7%) in the DMO group. Partial avascular necrosis of the metatarsal head with advanced arthritis of the first metatarsophalangeal joint developed in 1 foot (4.3%) in the DMO group. In conclusion, no differences in the clinical and radiographic results were observed between the 2 groups for hallux valgus deformity with an increased DMAA. Copyright © 2017 The American College of Foot and Ankle Surgeons. Published by Elsevier Inc. All rights reserved.
Huang, Jing-Hui; Yang, Wei-Zhou; Shen, Chao; Chang, Michael S; Li, Huan; Luo, Zhuo-Jing; Tao, Hui-Ren
2015-10-15
Retrospective case series. To investigate the safety and efficacy of spine-shortening osteotomy for congenital scoliosis with tethered cord. Conventional surgery for congenital scoliosis associated with tethered cord risks the complications of detethering. Spine-shortening osteotomy holds the potential to correct scoliosis and decrease spinal cord tension simultaneously without an extra detethering procedure, but no data on this issue is available. 21 patients (14 females and 7 males, average age 15.4 yr) underwent spine-shortening osteotomy without detethering. All of the patients had tethered cord. Patients with main curve more than 90° underwent vertebral column resection (VCR), whereas the others had pedicle subtraction osteotomy (PSO) performed. The average postoperative follow-up period was 45.2 months. The mean operation time was 544.5 min with average blood loss of 2769.1 ml. The deformity correction was 61.3% in the coronal plane and 43.9° in the sagittal plane. 10 patients had neurological deficits preoperatively. At the final follow-up, the deficits in 8 (80%) patients were significantly improved, whereas 2 (20%) remained unchanged. At final follow-up, 71.4% (5/7) patients reported improvement in motor function, 100% (3/3) had improved pain scores, and 75% (3/4) reported better sensory function after the spine-shortening osteotomy. Urinary dysfunction and bowel incontinence present preoperatively in 3 patients all recovered by final follow-up. 5 (23.8%) patients incurred complications including temporary neurological deterioration in 1 patient, urinary tract infection in 2 patients, cerebrospinal fluid leakage in 1 patient, and blood loss more than 5000 ml in 1 patient. Spine-shortening osteotomy is a safe and effective procedure for congenital scoliosis associated with tethered cord. Spine-shortening osteotomy at the thoracic apical vertebrae level not only corrects the spine deformity but also simultaneously releases the tension of the tethered cord, resulting in improved neurologic function.
[Femoral osteotomy for severe hip osteoarthritis: an actuarial analysis of results].
Dujardin, F; Matsoukis, J; Duparc, F; Biga, N; Thomine, J M
1994-01-01
In cases of severe hip osteoarthritis in young patients, the intertrochanteric osteotomy can delay total hip arthroplasty. The main advantage of the osteotomy is to preserve the bone stock. The main disadvantages are the lasting postoperative invalidity and the varying longterm success rate. Our aim was to quantify these disadvantages using survivorship analysis. The study included 64 patients (65 osteotomies) ranging from 16 to 68 years. The osteotomies were performed between 1975 and 1987. The osteoarthritis was stage III or IV, with a joint space less than 50 per cent. Osteoarthritis was primitive in 25 cases and secondary in the others. The osteotomy always included a medial displacement of the shaft according to the principle of Mac Murray's procedure, but also 22 cases (33.8 per cent) had a varus angulation and 19 (29.2 per cent) a valgus angulation. The preoperative pain score according to the Merle d'Aubigné (MDA) grading was 2.6 (1 to 4) and the global functional score was 11.1 (5 to 15). The patients were reviewed in 1991 and examined clinically and radiographically. The results of the 65 cases were distributed into 3 groups: -29 cases having reached the follow-up without difficulty, -7 patients were lost for follow-up examination, 6 of these latter than 9 years, -29 patients taking osteotomy failure as a pain lesser than the 3 MDA score. The postoperative delay to obtain the best functional result was 6 to 24 months (mean: 13.65). This result ranged from 5 to 17 MDA score (mean: 15) with pain ranging from 2 to 6 (mean: 5). The survivorship analysis curve showed 67.5 +/- 19.5 per cent survival for all osteotomies to the interval of 9-10 years. There were 3 types of results: -3 early failures (4.6 per cent) one because of a deep infection, -in 7 cases, after a short initial functional improvement, there was a progressive degradation leading to failure in 3.7 years (2 to 6 years), -55 cases with a lasting period of functional improvement, 26 osteotomies leading to failure in 3.5 to 15 postoperative years and, 29 cases having reached the follow-up (7 to 16 years mean 10 years). There was radiographic improvement of the osteoarthritis increasing the joint space in 59 cases (90.7 per cent). There was no radiographic improvement in the 6 other cases, including the 2 functional failures. The functional degradation appeared parallel to the radiographic degradation leading to a decrease of joint space to 90 per cent. We tested differences between various groups using Log Rank test. We found no difference in survival between the 3 different types of osteotomy. The results of this study can help to choose between intertrochanteric osteotomy and THA in the case of severe osteoarthritis. The best functional result of the osteotomy is in one postoperative year, with a mean MDA score of 15 and a mean pain score of 5. It appears that we do not predict the duration of functional improvement, the patient has 2/3 chances that this improvement reaches 10 years.
Walton, R D M; Martin, E; Wright, D; Garg, N K; Perry, D; Bass, A; Bruce, C
2015-03-01
We undertook a retrospective comparative study of all patients with an unstable slipped capital femoral epiphysis presenting to a single centre between 1998 and 2011. There were 45 patients (46 hips; mean age 12.6 years; 9 to 14); 16 hips underwent intracapsular cuneiform osteotomy and 30 underwent pinning in situ, with varying degrees of serendipitous reduction. No patient in the osteotomy group was lost to follow-up, which was undertaken at a mean of 28 months (11 to 48); four patients in the pinning in situ group were lost to follow-up, which occurred at a mean of 30 months (10 to 50). Avascular necrosis (AVN) occurred in four hips (25%) following osteotomy and in 11 (42%) following pinning in situ. AVN was not seen in five hips for which osteotomy was undertaken > 13 days after presentation. AVN occurred in four of ten (40%) hips undergoing emergency pinning in situ, compared with four of 15 (47%) undergoing non-emergency pinning. The rate of AVN was 67% (four of six) in those undergoing pinning on the second or third day after presentation. Pinning in situ following complete reduction led to AVN in four out of five cases (80%). In comparison, pinning in situ following incomplete reduction led to AVN in 7 of 21 cases (33%). The rate of development of AVN was significantly higher following pinning in situ with complete reduction than following intracapsular osteotomy (p = 0.048). Complete reduction was more frequent in those treated by emergency pinning and was strongly associated with AVN (p = 0.005). Non-emergency intracapsular osteotomy may have a protective effect on the epiphyseal vasculature and should be undertaken with a delay of at least two weeks. The place of emergency pinning in situ in these patients needs to be re-evaluated, possibly in favour of an emergency open procedure or delayed intracapsular osteotomy. Non-emergency pinning in situ should be undertaken after a delay of at least five days, with the greatest risk at two and three days after presentation. Intracapsular osteotomy should be undertaken after a delay of at least 14 days. In our experience, closed epiphyseal reduction is harmful. Cite this article: Bone Joint J 2015;97-B:412-19. ©2015 The British Editorial Society of Bone & Joint Surgery.
Jeyaseelan, L; Chandrashekar, S; Mulligan, A; Bosman, H A; Watson, A J S
2016-09-01
The mainstay of surgical correction of hallux valgus is first metatarsal osteotomy, either proximally or distally. We present a technique of combining a distal chevron osteotomy with a proximal opening wedge osteotomy, for the correction of moderate to severe hallux valgus. We reviewed 45 patients (49 feet) who had undergone double osteotomy. Outcome was assessed using the American Orthopaedic Foot and Ankle Society (AOFAS) and the Short Form (SF) -36 Health Survey scores. Radiological measurements were undertaken to assess the correction. The mean age of the patients was 60.8 years (44.2 to 75.3). The mean follow-up was 35.4 months (24 to 51). The mean AOFAS score improved from 54.7 to 92.3 (p < 0.001) and the mean SF-36 score from 59 to 86 (p < 0.001). The mean hallux valgus and intermetatarsal angles were improved from 41.6(o) to 12.8(o) (p < 0.001) and from 22.1(o) to 7.1(o), respectively (p < 0.001). The mean distal metatarsal articular angle improved from 23(o) to 9.7(o). The mean sesamoid position, as described by Hardy and Clapham, improved from 6.8 to 3.5. The mean length of the first metatarsal was unchanged. The overall rate of complications was 4.1% (two patients). These results suggest that a double osteotomy of the first metatarsal is a reliable, safe technique which, when compared with other metatarsal osteotomies, provides strong angular correction and excellent outcomes with a low rate of complications. Cite this article: Bone Joint J 2016;98-B:1202-7. ©2016 The British Editorial Society of Bone & Joint Surgery.
Comparison of Chevron and Distal Oblique Osteotomy for Bunion Correction.
Scharer, Brandon M; DeVries, J George
2016-01-01
The chevron osteotomy is a standard procedure by which bunions are corrected. One of us routinely performs a distal oblique osteotomy, which, to the best of our knowledge, has not been described for the correction of bunion deformities. The purpose of the present study was to compare the short- and medium-term results of the distal oblique and chevron osteotomies for bunion correction. We performed a retrospective clinical and radiographic comparison of patients who had undergone a distal oblique or chevron osteotomy for the correction of bunion deformity. In addition, a prospective patient satisfaction survey was undertaken. A total of 55 patients were included in the present study and were treated from January 2012 to November 2014. Of the 55 patients, 27 (49.2%) were in the chevron group and 28 (50.8%) in the distal oblique group. Radiographically, no statistically significant difference was found between the 2 groups with respect to postoperative first intermetatarsal angle (p < .0001) and hallux valgus angle (p < .0001), but a greater change was found in the intermetatarsal angle in the distal oblique group (p = .467). Prospective patient satisfaction scores were available for 33 patients (60%), 16 (29%) in the chevron group and 17 (31%) in the distal oblique group. When converting the satisfaction score to a numerical score, the chevron group scored 3.3 ± 1.1 and the distal oblique group scored 3.2 ± 0.8 (p = .812). We found that the distal oblique osteotomy used in the present study is simple and reliable and showed radiographic correction and patient satisfaction equivalent to those in the chevron osteotomy. Copyright © 2016 American College of Foot and Ankle Surgeons. Published by Elsevier Inc. All rights reserved.
Pizones, Javier; Sánchez-Mariscal, Felisa; Zúñiga, Lorenzo; Izquierdo, Enrique
2015-07-01
There is controversy regarding the effect of the Ponte osteotomies in the improvement of coronal correction, its maintenance during follow-up, and the restoration of thoracic kyphosis in adolescent idiopathic scoliosis (AIS). Seventy-three AIS patients with Lenke type 1-4 curves were included. A prospective description of 43 consecutive patients who underwent apical Ponte osteotomies and sublaminar wires with hybrid instrumentation was retrospectively compared to a historical cohort of 30 patients without "Ponte osteotomies". The surgical details and complications were recorded. We evaluated the radiological measurements and SRS-22 Questionnaire scores over a 2-year follow-up. The Ponte group achieved better postoperative (70 vs 57 %) and final (62 vs 50 %) main curve correction P < 0.001, with no significant loss of correction (4.2° vs 2.5°) P = 0.2 at the final follow-up (48 vs 106 months). We did not find a difference in thoracic (T5-T12) postoperative (22° vs 24°) and final (25° vs 26°) mean kyphosis angle. However, the "Ponte osteotomies" helped to achieve a normal sagittal profile, increasing preoperative hypokyphotic curves (<10°) from 6° to 17° (control: 9°-12°; P = 0.01); and preoperative hyperkyphotic curves (>40°) from 52° to 26° (control: 46°-39°; P = 0.01). The length of surgery was similar (4.3 vs 4.6 h), as were the SRS-22 scores. No major complications were found. Ponte osteotomies in major thoracic AIS curves treated by sublaminar wires allowed more effective corrective maneuvers, which improved coronal correction without a significant loss during follow-up. The sagittal profile appears to be determined by other variables; however, "Ponte osteotomies" facilitate the contouring of the desired kyphosis.
Z-osteotomy in hallux valgus: clinical and radiological outcome after Scarf osteotomy
Jäger, Marcus; Schmidt, Michael; Wild, Alexander; Bittersohl, Bernd; Courtois, Susanne; Schmidt, Troy G.; Rüdiger, Krauspe
2009-01-01
Correction osteotomies of the first metatarsal are common surgical approaches in treating hallux valgus deformities whereas the Scarf osteotomy has gained popularity. The purpose of this study was to analyze short- and mid-term results in hallux valgus patients who underwent a Scarf osteotomy. The subjective and radiological outcome of 131 Scarf osteotomies (106 hallux valgus patients, mean age: 57.5 years, range: 22–90 years) were retrospectively analyzed. Mean follow-up was 22.4 months (range: 6 months–5 years). Surgical indications were: intermetatarsal angle (IMA) of 12–23°; increased proximal articular angle (PAA>8°), and range of motion of the metatarsophalangeal joint in flexion and extension >40°. Exclusion criteria were severe osteoporosis and/or osteoarthritis. The mean subjective range of motion (ROM) of the great toe post-surgery was 0.8±1.73 points (0: full ROM, 10: total stiffness). The mean subjective cosmetic result was 2.7±2.7 points (0: excellent, 10: poor). The overall post-operative patient satisfaction with the result was high (2.1±2.5 points (0: excellent, 10: poor). The mean hallux valgus angle improvement was 16.6° (pre-operative mean value: 37.5°) which was statistically significant (p<0.01). The IMA improved by an average of 5.96° from a pre-operative mean value of 15.4° (p<0.01). Neither osteonecrosis of the distal fragment nor perioperative fractures were noted during the follow-up. In keeping with our follow-up results, the Scarf osteotomy approach shows potential in the therapy of hallux valgus. PMID:21808668
Cervical osteotomy in ankylosing spondylitis: evaluation of new developments.
Langeloo, Danielle D; Journee, Henricus L; Pavlov, Paul W; de Kleuver, Marinus
2006-04-01
Cervical osteotomy can be performed on patients with cervical kyphosis due to ankylosing spondylitis. This study reviews the role of two new developments in cervical osteotomy surgery: internal fixation and transcranial electrical stimulated motor evoked potential monitoring (TES-MEP). From 1999 to 2004, 16 patients underwent a C7-osteotomy with internal fixation. In 11 patients, cervical osteotomy was performed in a sitting position with halo-cast immobilization (group S), five patients underwent surgery in prone position with Mayfield clamp fixation (group P). In group P, longer fusion towards T4-T6 could be obtained that created a more stable fixation. Therefore, post-operative immobilization protocol of group P was simplified from halo-cast to cervical orthosis. Consolidation was obtained in all patients without loss of correction. Post-operative chin-brow to vertical angle measured 5 degrees (range 0-15). TES-MEP was successfully performed during all surgical procedures. In total, nine neurological events were registered. Additional surgical intervention resulted in recovery of amplitudes in six of nine events. In two patients spontaneous recovery took place. One patient showed no recovery of amplitudes despite surgical intervention and a partial C6 spinal cord lesion occurred. We conclude that C7 osteotomy with internal fixation has been shown to be a reliable and stable technique. When surgery is performed the in prone position, distal fixation can be optimally obtained allowing post-operative treatment by cervical orthosis instead of a halo-cast. TES-MEP monitoring has been shown to be a reliable neuromonitoring technique with high clinical relevancy during cervical osteotomy because it allows timely intervention before occurrence of permanent cord damage in a large proportion of the patients.
Terjesen, Terje; Wiig, Ola; Svenningsen, Svein
2012-09-01
In the Norwegian prospective study on Legg-Calvé-Perthes disease (LCPD), we found varus femoral osteotomy gave better femoral head sphericity at a mean of 5 years postoperative than physiotherapy in children older than 6.0 years at diagnosis with femoral head necrosis of more than 50%. That study did not include separate analyses for hips with 100% necrosis and those with a percentage of necrosis between 50% and 100%. We asked whether (1) femoral osteotomy improves femoral head sphericity at followup in all patients with more than 50% femoral head necrosis or in selected groups only and (2) there is a critical age between 6.0 and 10.0 years over which femoral osteotomy does not improve the prognosis. We treated 70 patients with unilateral LCPD, age at diagnosis of more than 6.0 years, and femoral head necrosis of more than 50% with varus femoral osteotomy between 1996 and 2000. We classified necrosis using the Catterall classification. We established a control group of 51 similar children who received physiotherapy. At the 5-year followup visit, the hips were graded according to femoral head shape: spherical, ovoid, or flat. At 5-year followup, there was no difference between the treatment groups in radiographic outcome in Catterall Group 3 hips. In Catterall Group 4 hips, femoral head sphericity was better in the osteotomy group, with flat femoral heads in 14% compared to 75% after physiotherapy. The same trend toward better head sphericity occurred when the lateral pillar classification was used. In children aged 6.0 to 10.0 years, in whom the whole femoral head is affected, femoral head sphericity 5 years after femoral osteotomy was better than that after physiotherapy.
Boomerang proximal tibial osteotomy for the treatment of severe varus gonarthrosis.
Sangkaew, Chanchit; Piyapittayanun, Peerapong
2013-06-01
The purpose of the study was to review the results of modified infratubercle displacement osteotomy in patients with severe varus gonarthrosis and to determine the factors influencing outcomes. A total of 177 knees in 133 patients with severe varus gonarthrosis were treated with infratubercle boomerang-shaped osteotomy, stabilised with dual plates. The mean age of the patients was 63.8 years (range 43-80 years), and the mean follow-up period was 61.4 months (range 24 -139 months). The factors associated with clinical and survival outcomes were analysed including age, gender, body mass index (BMI), preoperative and post-operative femorotibial angle and femorotibial angle at one year after surgery. Using the Knee Society clinical rating system 149 knees or 84.2 % were rated as having good to excellent results and 21 knees or 15.8 % as having fair to poor results. Overall, the mean preoperative knee score of 33.6 points had improved significantly to 80.7 points at the final follow-up (p < 0.001). Using Kaplan-Meier survivorship analysis the five-year survival was 97.1 % with conversion to arthroplasty or second osteotomy as the end point and 89.2 % with a knee score of under 70 points as the end point. The anatomical femorotibial angle at one year after osteotomy had the most significant positive effect on the clinical (p < 0.001) and survival outcomes for all end points (p = 0.002 for conversion to arthroplasty or second osteotomy and p < 0.001 for knee score less than 70 points). The boomerang osteotomy can create adequate valgus alignment in severe varus gonarthrosis. The one-year post-operative knee alignment of 11° valgus provided the most satisfactory results and that between six and 15° valgus the longest survival time.
High tibial closing wedge osteotomy for medial compartment osteoarthrosis of knee
Tuli, SM; Kapoor, Varun
2008-01-01
Background: Most patients of symptomatic osteoarthrosis of knee are associated with varus malalignment that is causative or contributory to painful arthrosis. It is rational to correct the malalignment to transfer the functional load to the unaffected or less affected compartment of the knee to relieve symptoms. We report the outcome of a simple technique of high tibial osteotomy in the medial compartment osteoarthrosis of the knee. Materials and Methods: Between 1996 and 2004 we performed closing wedge osteotomy in 78 knees in 65 patients. The patients selected for osteotomy were symptomatic essentially due to medial compartment osteoarthrosis associated with moderate genu varum. Of the 19 patients who had bilateral symptomatic disease 11 opted for high tibial osteotomy of their second knee 1-3 years after the first operation. Preoperative grading of osteoarthrosis and postoperative function was assessed using Japanese Orthopaedic Association (JOA) rating scale. Results: At a minimum follow-up of 2 years (range 2-9 years) 6-10° of valgus correction at the site of osteotomy was maintained, there was significant relief of pain while walking, negotiating stairs, squatting and sitting cross-legged. Walking distance in all patients improved by two to four times their preoperative distance of 200-400 m. No patient lost any preoperative knee function. The mean JOA scoring improved from preoperative 54 (40-65) to 77 (55-85) at final follow-up. Conclusion: Closing wedge high tibial osteotomy performed by our technique can be undertaken in any setup with moderate facilities. Operation related complications are minimal and avoidable. Kirschner wire fixation is least likely to interfere with replacement surgery if it becomes necessary. PMID:19823659
Matzaroglou, Charalambos; Bougas, Panagiotis; Panagiotopoulos, Elias; Saridis, Alkis; Karanikolas, Menelaos; Kouzoudis, Dimitris
2010-01-01
Hallux valgus is a very common foot disorder, with its prevalence estimated at 33% in adult shoe-wearing populations. Conservative management is the initial treatment of choice for this condition, but surgery is sometimes needed. The 600 angle Chevron osteotomy is an accepted method for correction of mild to moderate hallux valgus in adults less than 60 years old. A modified 900 angle Chevron osteotomy has also been described; this modified technique can confer some advantages compared to the 600 angle method, and reported results are good. In the current work we present clinical data from a cohort of fifty-one female patients who had surgery for sixty-two hallux valgus deformities. In addition, in order to get a better physical insight and study the mechanical stresses along the two osteotomies, Finite Element Analysis (FEA) was also conducted. FEA indicated enhanced mechanical bonding with the modified 900 Chevron osteotomy, because the compressive stresses that keep the two bone parts together are stronger, and the shearing stresses that tend to slide the two bone parts apart are weaker, compared to the typical 600 technique. Follow-up data on our patient cohort show good or excellent long-term clinical results with the modified 900 angle technique. These results are consistent with the FEA-based hypothesis that a 900 Chevron osteotomy confers certain mechanical advantages compared to the typical 600 procedure. PMID:20648223
Heat generation by two different saw blades used for tibial plateau leveling osteotomies.
Bachelez, Andreas; Martinez, Steven A
2012-01-01
During tibial plateau leveling osteotomy (TPLO) the saw blade produces frictional heat. The purpose of this study was to evaluate and compare heat generated by two TPLO blade designs (Slocum Enterprises [SE] and New Generation Devices [NDG]), with or without irrigation, on cadaveric canine tibias. Thirty-six paired tibias were used to continuously measure bone temperatures during osteotomy through both cortices (i.e., the cis and trans cortices). Each pair was assigned to either an irrigation or nonirrigation group during osteotomy, and each tibia within a pair was osteotomized using a different saw blade design. Saw blade temperatures were recorded and temperatures were compared for all combinations of blade type, cortex, and irrigation. In the cis cortex group, the SE blade generated more bone heat than the NGD blade (P=0.0258). Significant differences in temperature generation between saw blade types were seen only when the osteotomy site was not irrigated (P=0.0156). For all variables measured, bone and saw blade temperature generation was lower with irrigation (P<0.05). None of the osteotomies performed with either saw blade produced a critical duration of damaging temperature ranges in this study. Although saw blade design and irrigation influence heat generation during the TPLO, the potential for bone thermal damage during TPLO is low. The use of the NGD blade with irrigation is recommended.
Bilmont, A; Retournard, M; Asimus, E; Palierne, S; Autefage, A
2018-06-11
This study evaluated the effects of tibial plateau levelling osteotomy on cranial tibial subluxation and tibial rotation angle in a model of feline cranial cruciate ligament deficient stifle joint. Quadriceps and gastrocnemius muscles were simulated with cables, turnbuckles and a spring in an ex vivo limb model. Cranial tibial subluxation and tibial rotation angle were measured radiographically before and after cranial cruciate ligament section, and after tibial plateau levelling osteotomy, at postoperative tibial plateau angles of +5°, 0° and -5°. Cranial tibial subluxation and tibial rotation angle were not significantly altered after tibial plateau levelling osteotomy with a tibial plateau angle of +5°. Additional rotation of the tibial plateau to a tibial plateau angle of 0° and -5° had no significant effect on cranial tibial subluxation and tibial rotation angle, although 2 out of 10 specimens were stabilized by a postoperative tibial plateau angle of -5°. No stabilization of the cranial cruciate ligament deficient stifle was observed in this model of the feline stifle, after tibial plateau levelling osteotomy. Given that stabilization of the cranial cruciate ligament deficient stifle was not obtained in this model, simple transposition of the tibial plateau levelling osteotomy technique from the dog to the cat may not be appropriate. Schattauer GmbH Stuttgart.
Kawai, Toshiyuki; Tanaka, Chiaki; Kanoe, Hiroshi
2014-03-10
Several authors reported encouraging results of total hip arthroplasty (THA) for Crowe IV hips performed using shortening osteotomy. However, few papers have documanted the results of THA for Crowe IV hips without shortening osteotomy. The aim of the present study was to assess the long term-results of cemented THAs for Crowe group IV hips performed without subtrochanteric shortening osteotomy. We have assessed the long term results of 27 cemented total hip arthroplasty (THA) performed without subtrochanteric osteotomy for Crowe group IV hip. All THAs were performed via transtrochanteric approach. After a mean follow-up of 10.6 (6 to 17.9) years, 25 hips (92.6%) had survived without revision surgery and survivorship analysis gave a survival rate of 96.3% at 10 years with any revision surgery as the end point. Although mean limb lengthening was 3.2 (1.0 to 5.1) cm, no hips developed nerve palsy. Complications occurred in four hips, necessitating revision surgery in two. Among the four complications, three involved the greater trochanter, two of which occurred in cases where braided cables had been used to reattach the greater trochanter. Although we encountered four complications, including three trochanteric problems, our findings suggest that THA without subtrochanteric shortening osteotomy can provide satisfactory long-term results in patients with Crowe IV hip.
[How to make your own custom cutting guides for both mandibular and fibular stair step osteotomies?
Rem, K; Bosc, R; De Kermadec, H; Hersant, B; Meningaud, J-P
2017-12-01
Using tailored cutting guides for osteocutaneous free fibula flap in complex mandibular reconstruction after cancer resection surgery constitutes a substantial improvement. Autonomously conceiving and manufacturing the cutting guides within a plastic surgery department with computer-aided design (CAD) and three-dimensional (3D) printing allows planning more complex osteotomies, such as stair-step osteotomies, in order to achieve more stable internal fixations. For the past three years, we have been producing by ourselves patient-tailored cutting guides using CAD and 3D printing. Osteotomies were virtually planned, making the cutting lines more complex in order to optimize the internal fixation stability. We also printed reconstructed mandible templates and shaped the reconstruction plates on them. We recorded data including manufacturing techniques and surgical outcomes. Eleven consecutive patients were operated on for an oral cavity cancer. For each patient, we planned the fibular and mandibular stair-step osteotomies and we produced tailored cutting guides. In all patients, we achieved to get immediately stable internal fixations and in 10 patients, a complete bone consolidation after 6 months. Autonomously manufacturing surgical cutting guides for mandibular reconstruction by free fibula flap is a significant improvement, regarding ergonomics and precision. Planning stair-step osteotomies to perform complementary internal fixation increases contact surface and congruence between the bone segments, thus improving the reconstructed mandible stability. Copyright © 2017 Elsevier Masson SAS. All rights reserved.
Kiskaddon, Eric M; Meeks, Brett D; Roberts, Joseph G; Laughlin, Richard T
2018-04-04
Plantar fascia release and calcaneal slide osteotomy are often components of the surgical management for cavovarus deformities of the foot. In this setting, plantar fascia release has traditionally been performed through an incision over the medial calcaneal tuberosity, and the calcaneal osteotomy through a lateral incision. Two separate incisions can potentially increase the operative time and morbidity. The purpose of the present study was threefold: to describe the operative technique, use cadaveric dissection to analyze whether a full release of the plantar fascia was possible through the lateral incision, and examine the proximity of the medial neurovascular structures to both the plantar fascia release and calcaneal slide osteotomy when performed together. In our cadaveric dissections, we found that full release of the plantar fascia is possible through the lateral incision with no obvious damage to the medial neurovascular structures. We also found that the calcaneal branch of the tibial nerve reliably crossed the osteotomy in all specimens. We have concluded that both the plantar fascia release and the calcaneal osteotomy can be safely performed through a lateral incision, if care is taken when completing the calcaneal osteotomy to ensure that the medial neurovascular structures remain uninjured. Copyright © 2017 The American College of Foot and Ankle Surgeons. Published by Elsevier Inc. All rights reserved.
The poor quality and reliability of information on periacetabular osteotomy on the internet in Japan
Takegami, Yasuhiko; Seki, Taisuke; Amano, Takafumi; Higuchi, Yoshitoshi; Komatsu, Daigo; Nishida, Yoshihiro; Ishiguro, Naoki
2017-01-01
ABSTRACT Although many patients use the internet to access health-related information, the quality and the reliability of the information is highly inconsistent. Periacetabular osteotomy (PAO) is one of the surgical procedures for hip dysplasia. However, medical information on PAO is limited on the internet. This study aims to evaluate the quality and reliability of information available on PAO on the internet in Japan. A web search was conducted on two search engines for the following terms: “hip osteotomy,” “pelvic osteotomy,” and “osteotomy for hip preservation” in Japanese. In total, we found 120 websites. To determine the quality and reliability of information on each website, we used the Health on the Net Foundation (HON) score, the Brief DISCERN score, and an osteotomy-specific content (OSC) score. After eliminating duplicate websites, we reviewed 49 unique websites. Only three websites (6.1%) had good reliability, as indicated by their HON scores. Twelve websites (24.4%) had good-quality information, as measured by their Brief DISCERN scores. As evaluated by their OSC scores, physician websites were found to be biased toward etiology and surgical indication and did not provide information on the complications of procedures. Non-physician websites were generally insufficient. The information about PAO on the internet is, therefore, unreliable and of poor-quality for Japanese patients. PMID:28878442
Piezoelectric osteotomy in hand surgery: first experiences with a new technique
Hoigne, Dominik J; Stübinger, Stefan; Kaenel, Oliver Von; Shamdasani, Sonia; Hasenboehler, Paula
2006-01-01
Background In hand and spinal surgery nerve lesions are feared complications with the use of standard oscillating saws. Oral surgeons have started using a newly developed ultrasound bone scalpel when performing precise osteotomies. By using a frequency of 25–29 kHz only mineralized tissue is cut, sparing the soft tissue. This reduces the risk of nerve lesions. As there is a lack of experience with this technique in the field of orthopaedic bone surgery, we performed the first ultrasound osteotomy in hand surgery. Method While performing a correctional osteotomy of the 5th metacarpal bone we used the Piezosurgery® Device from Mectron [Italy] instead of the usual oscillating saw. We will report on our experience with one case, with a follow up time of one year. Results The cut was highly precise and there were no vibrations of the bone. The time needed for the operation was slightly longer than the time needed while using the usual saw. Bone healing was good and at no point were there any neurovascular disturbances. Conclusion The Piezosurgery® Device is useful for small long bone osteotomies. Using the fine tip enables curved cutting and provides an opportunity for new osteotomy techniques. As the device selectively cuts bone we feel that this device has great potential in the field of hand- and spinal surgery. PMID:16611362
Chevron versus Mitchell osteotomy in hallux valgus surgery: a comparative study.
Lambers Heerspink, F O; Verburg, H; Reininga, I H F; van Raaij, T M
2015-01-01
Good clinical results have been reported for chevron and Mitchell osteotomies in mild hallux valgus (HV). The primary aim of the present study was to compare first metatarsal shortening after chevron and Mitchell osteotomies in HV. The secondary outcome measures were the degree of valgus correction, metatarsalgia, and patient satisfaction. A total of 84 patients were included in the present study and were treated from 2005 to 2007; 42 patients were in each group. The outcome measurements-first metatarsal length, HV angle, 1-2 intermetatarsal angle, satisfaction, and metatarsalgia-were taken preoperatively and at follow-up. The Mitchell osteotomy resulted in a significantly larger decrease in the first metatarsal length. No significant difference in transfer metatarsalgia was found. Approximately 30% of patients were mildly or not satisfied after HV surgery. Mitchell osteotomy leads to a larger decrease in the first metatarsal length. Patients with metatarsalgia performed poorly, and no significant differences in metatarsalgia were found. Preventing postoperative metatarsalgia is important for a successful outcome after HV surgery. Copyright © 2015 American College of Foot and Ankle Surgeons. Published by Elsevier Inc. All rights reserved.
New modified technique of osteotomy for hallux valgus.
Oh, I S; Kim, M K; Lee, S H
2004-12-01
To improve the technique of osteotomy for hallux valgus (bunion). 38 cases of a new modified osteotomy procedure for hallux valgus were performed for 22 patients (21 women and one man). During a 3-year (range, 2-5 years) follow-up, the patients underwent physical examination; and their American Orthopedic Foot and Ankle Society hallux-metatarso-phalangeal-interphalangeal scale scores and standard foot radiographic measurements were recorded. 20 of the 22 patients (38 cases) had no pain, achieved good cosmesis, and were completely satisfied with the results of the operation. The remaining 2 patients had occasional mild discomfort. The mean hallux-metatarso-phalangeal-interphalangeal scale score was 93 points (range, 78-100 points). The mean preoperative and postoperative metatarsophalangeal angles were 34 degrees and 11 degrees, respectively. The mean postoperative reduction of the intermetatarsal angle and metatarsophalangeal angle were 6 degrees and 23 degrees, respectively. The new technique of osteotomy achieved even greater stability and accurate correction of the deformity in our 38 cases. Furthermore, it was more effective than conventional 'chevron' osteotomy in terms of correction of the deformity. Therefore, it should be used more widely.
[Characteristics in treatment of the hip in patients with Down syndrome].
Peterlein, C-D; Schiel, M; Timmesfeld, N; Schofer, M D; Eberhardt, O; Wirth, T; Fernandez, F F
2013-12-01
The treatment of hip instability in patients with Down syndrome is challenging. We have performed different pelvic osteotomies and corrections at the proximal femur for this indication. This retrospective study was conducted to evaluate the clinical and radiological outcome of each intervention. All in all, 166 patients with Down syndrome were treated at our orthopaedic department in the observation period. Problems related to the hip joint were diagnosed in 63 of those patients. Only patients who underwent surgery were included in this study. The charts and X-rays of these 31 patients were evaluated with respect to the following parameters: incidence of the hip problem, concomitant diseases, temporal progress, kind of operation method and date, duration of stay in the hospital, after-care, follow-on surgery related to complications, AC angle, CE angle, ACM angle, CCD angle, index of migration according to Reimers, classification of Bauer and Kerschbauer and general morphology of the femoral head. The group was compared with an age-matched group of 21 patients with hip dysplasia. Those patients underwent the same sort of operation in the same year. In the Morbus Down group, we performed surgery for preservation of the hip in 49 cases. This included 13 osteotomies according to Chiari, 11 triple osteotomies according to Tönnis, 10 corrections by femoral varus derotation osteotomy, 8 pelvic osteotomies according to Pemberton, 5 pelvic osteotomies according to Salter and 2 open reductions of the hip. With respect to the moment of surgery, we detected three peaks of age. There was no difference in course of disease and quantity of complications between the groups. Satisfactory results concerning clinical and radiological outcome were achieved predominantly by complete redirectional acetabular osteotomies. Half of the patients who were solely treated by femoral varus derotation osteotomy needed follow-on surgery in the form of pelvic osteotomy. Comparison of preoperative and postoperative range of motion of the hip joint between groups detected capsular insufficiency, increased ligamentous laxity and muscular hypotonia in patients with Down syndrome. Comparison of pelvic radiographs demonstrated significant improvement concerning measured angles in both groups. Preoperative values with respect to AC angle and CE angle were demonstrated to be lower in the hip dysplasia group (p < 0.01); whereas values for ACM angle were comparable between groups. Hypermobility and secondary dislocation of the hip joint is a common problem in patients with Down syndrome, which often requires surgical intervention at an early stage. According to our data and clinical results we suggest a complete redirectional acetabular osteotomy in combination with capsular plication for treatment of this challenging condition. Georg Thieme Verlag KG Stuttgart · New York.
3D printing-assisted osteotomy treatment for the malunion of lateral tibial plateau fracture.
Yang, Peng; Du, Di; Zhou, Zhibin; Lu, Nan; Fu, Qiang; Ma, Jun; Zhao, Liangyu; Chen, Aimin
2016-12-01
Osteotomy and internal fixation are usually the most effective way to treat the malunion of lateral tibial plateau fractures, and the accuracy of the osteotomy is still a challenge for surgeons. This is a report of a series of prospectively study of osteotomy treatment for the malunion of lateral plateau fractures with the aid of 3D printing technology. A total of 7 patients with malunion of lateral tibial plateau fractures were enrolled in the study between September 2012 to September 2014 and completed follow up. CT image data were used for 3D reconstruction, and individually 3D printed models were used for accurate measurements and detail osteotomy procedures planning. Under the premeditated operation plan, the osteotomy operations were performed. Patients were invited for follow-up examinations at 2 and 6 weeks and then at intervals of 6 to 8 weeks until 12 months or more. Mean age of the patients was 44 years (range 30-52 years), 3 cases were result of fall injuries, 2 were traffic accidents and 2 were sports injuries. Among the cases, one accompanied with craniocerebra trauma, one with pelvic fracture, one accompanied with both. According to the Schatzker Tibial Plateau classification, the original fracture type were 3 type I, 1 type II and 3 type III. The lateral tibial plateau collapse ranges from 4 mm-12mm, with an average of 9.4mm. All the operations were successfully completed, the average operation time was 77.1min (range 70-90 min), the average intraoperative blood loss was 121.4ml (range 90-180ml), the mean follow-up time was 14.4 months (range 12-18 months), and the average healing time of the osteotomy fragments was 12 weeks (range 11-13 weeks). The difference between preoperative and postoperative Rasmussen scores were statistically significant (P<0.05). All the patients were obtained functional recovery, with no complications. 3D printing technology is helpful to accurately design osteotomy operation, reduce the risk of postoperative deformity, decrease intraoperative blood loss, shorten the operation time, and can effectively improve the treatment effect. Copyright © 2016. Published by Elsevier Ltd.
The effect of platelet-rich plasma on osseous healing in dogs undergoing high tibial osteotomy.
Franklin, Samuel P; Burke, Emily E; Holmes, Shannon P
2017-01-01
The purpose of this study was to investigate whether platelet-rich plasma (PRP) enhances osseous healing in conjunction with a high tibial osteotomy in dogs. Randomized controlled trial. Sixty-four client-owned pet dogs with naturally occurring rupture of the anterior cruciate ligament and that were to be treated with a high tibial osteotomy (tibial plateau leveling osteotomy) were randomized into the treatment or control group. Dogs in the treatment group received autologous platelet-rich plasma activated with calcium chloride and bovine thrombin to produce a well-formed PRP gel that was placed into the osteotomy at the time of surgery. Dogs in the control group received saline lavage of the osteotomy. All dogs had the osteotomy stabilized with identical titanium alloy implants and all aspects of the surgical procedure and post-operative care were identical among dogs of the two groups. Bone healing was assessed at exactly 28, 49, and 70 days after surgery with radiography and ultrasonography and with MRI at day 28. The effect of PRP on bone healing was assessed using a repeated measures analysis of covariance with radiographic and ultrasonographic data and using a t-test with the MRI data. Sixty dogs completed the study. There were no significant differences in age, weight, or gender distribution between the treatment and control groups. Twenty-seven dogs were treated with PRP and 33 were in the control group. The average platelet concentration of the PRP was 1.37x106 platelets/μL (±489x103) with a leukocyte concentration of 5.45x103/μL (±3.5x103). All dogs demonstrated progressive healing over time and achieved clinically successful outcomes. Time since surgery and patient age were significant predictors of radiographic healing and time since surgery was a significant predictor of ultrasonographic assessment of healing. There was no significant effect of PRP treatment as assessed radiographically, ultrasonographically, or with MRI. The PRP used in this study did not hasten osseous union in dogs treated with a high tibial osteotomy.
Rodrigues, Daniel B; Campos, Paulo S F; Wolford, Larry M; Ignácio, Jaqueline; Gonçalves, João R
2018-02-19
Maxillary segmentation involving interdental osteotomies can have an adverse effect on the interdental crestal bone and adjacent teeth. The purpose of the present study was to evaluate the effect of interdental osteotomies on surrounding osseous and dental structures, including adjacent teeth, using cone beam computed tomography (CBCT), in patients who underwent segmental maxillary osteotomies. The present retrospective cohort study evaluated interdental osteotomy (IDO) sites between the lateral incisors and canines in patients treated with 3-piece Le Fort I osteotomies. CBCT scans were assessed using Kodac Dental Imaging software at specific intervals: T0 (before surgery), T1 (immediately after surgery), and T2 (a minimum of 11 months after surgery). The statistical analysis using a linear regression model was adjusted to compare the variables at the different intervals. Injury to the dental structures was assessed by radiological evidence of dental damage, the requirement for endodontic treatment, or tooth loss. We evaluated 94 IDO sites in 47 patients in the present study. The mean inter-radicular distance at T0 was 2.5 mm. A statistically significant increase was seen in the inter-radicular distance (between T1 and T0) of 0.72 mm, with a reduction of the alveolar bone crest height (between T2 and T0) of 0.19 mm (P < .001) for the group that underwent IDO. A weak correlation was found for this increase in the inter-radicular distance, with changes in the alveolar crest bone height. The potential complications associated with interdental osteotomies such as iatrogenic damage to the tooth structure, the need for endodontic treatment, and tooth loss were not encountered in any patients. We found very low morbidity for the interdental alveolar crest and the integrity of teeth adjacent to interdental osteotomies for patients who underwent maxillary segmentation between the lateral incisors and canines. Copyright © 2018 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.
The effect of platelet-rich plasma on osseous healing in dogs undergoing high tibial osteotomy
Burke, Emily E.; Holmes, Shannon P.
2017-01-01
Objectives The purpose of this study was to investigate whether platelet-rich plasma (PRP) enhances osseous healing in conjunction with a high tibial osteotomy in dogs. Study design Randomized controlled trial. Methods Sixty-four client-owned pet dogs with naturally occurring rupture of the anterior cruciate ligament and that were to be treated with a high tibial osteotomy (tibial plateau leveling osteotomy) were randomized into the treatment or control group. Dogs in the treatment group received autologous platelet-rich plasma activated with calcium chloride and bovine thrombin to produce a well-formed PRP gel that was placed into the osteotomy at the time of surgery. Dogs in the control group received saline lavage of the osteotomy. All dogs had the osteotomy stabilized with identical titanium alloy implants and all aspects of the surgical procedure and post-operative care were identical among dogs of the two groups. Bone healing was assessed at exactly 28, 49, and 70 days after surgery with radiography and ultrasonography and with MRI at day 28. The effect of PRP on bone healing was assessed using a repeated measures analysis of covariance with radiographic and ultrasonographic data and using a t-test with the MRI data. Results Sixty dogs completed the study. There were no significant differences in age, weight, or gender distribution between the treatment and control groups. Twenty-seven dogs were treated with PRP and 33 were in the control group. The average platelet concentration of the PRP was 1.37x106 platelets/μL (±489x103) with a leukocyte concentration of 5.45x103/μL (±3.5x103). All dogs demonstrated progressive healing over time and achieved clinically successful outcomes. Time since surgery and patient age were significant predictors of radiographic healing and time since surgery was a significant predictor of ultrasonographic assessment of healing. There was no significant effect of PRP treatment as assessed radiographically, ultrasonographically, or with MRI. Conclusion The PRP used in this study did not hasten osseous union in dogs treated with a high tibial osteotomy. PMID:28520812
Corrective osteotomy for combined intra- and extra-articular distal radius malunion.
Buijze, Geert A; Prommersberger, Karl-Josef; González Del Pino, Juan; Fernandez, Diego L; Jupiter, Jesse B
2012-10-01
This study evaluated the functional outcome of corrective osteotomy for combined intra- and extra-articular malunions of the distal radius using multiple outcome scores. We evaluated 18 skeletally mature patients at an average of 78 months after corrective osteotomy for a combined intra- and extra-articular malunion of the distal part of the radius. The indication for osteotomy in all patients was the combination of an extra-articular deformity (≥ 15° volar or ≥ 10° dorsal angulation or ≥ 3 mm radial shortening) and intra-articular incongruity of 2 mm or greater (maximum stepoff or gap), as measured on lateral and posteroanterior radiographs. The average interval from the injury to the osteotomy was 9 months. The average maximum stepoff or gap of the articular surface before surgery was 4 mm. All 18 patients healed uneventfully and the final articular incongruity was reduced to 2 mm or less. Final range of motion and grip strength significantly improved, averaging 89% and 84% of the uninjured side and 185% and 241% of the preoperative measures, respectively. The rate of excellent or good results was 72% according to the validated rating system Mayo Modified Wrist Score, and 89% according to the unvalidated system of Gartland and Werley. The mean Disabilities of the Arm, Shoulder, and Hand score was 11, which corresponds to mild perceived disability. Of the 18 cases, 11 normalized upper limb function. Five patients had complications; all were successfully treated. According to the rating system of Knirk and Jupiter, 4 had grade 1 and 1 had grade 2 osteoarthritis of the radiocarpal joint on radiographs. Two of those patients reported occasional mild pain. Radiographic osteoarthritis did not correlate with strength, motion, and wrist scores. Outcomes of corrective osteotomy for combined intra- and extra-articular malunions were comparable to those of osteotomy for isolated intra- and extra-articular malunions. A successful corrective osteotomy for the treatment of complex intra- and extra-articular distal radius malunions can improve wrist function. Therapeutic IV. Copyright © 2012 American Society for Surgery of the Hand. Published by Elsevier Inc. All rights reserved.
Fixation systems of greater trochanteric osteotomies: biomechanical and clinical outcomes.
Jarit, Gregg J; Sathappan, Sathappan S; Panchal, Anand; Strauss, Eric; Di Cesare, Paul E
2007-10-01
The development of cerclage systems for fixation of greater trochanteric osteotomies has progressed from monofilament wires to multifilament cables to cable grip and cable plate systems. Cerclage wires and cables have various clinical indications, including fixation for fractures and for trochanteric osteotomy in hip arthroplasty. To achieve stable fixation and eventual union of the trochanteric osteotomy, the implant must counteract the destabilizing forces associated with pull of the peritrochanteric musculature. The material properties of cables and cable grip systems are superior to those of monofilament wires; however, potential complications with the use of cables include debris generation and third-body polyethylene wear. Nevertheless, the cable grip system provides the strongest fixation and results in lower rates of nonunion and trochanteric migration. Cable plate constructs show promise but require further clinical studies to validate their efficacy and safety.
Ulnar Rotation Osteotomy for Congenital Radial Head Dislocation.
Liu, Ruiyu; Miao, Wusheng; Mu, Mingchao; Wu, Ge; Qu, Jining; Wu, Yongtao
2015-09-01
To evaluate an ulnar rotation osteotomy for congenital anterior dislocation of the radial head. Nine patients (5 boys and 4 girls aged 6 to 13 years) with congenital anterior dislocation of the radial head were treated with ulnar rotation osteotomy. Magnetic resonance imaging of the elbow showed the proximal radioulnar joint on the anterior-lateral side of the ulna rather than on the lateral side in patients with congenital anterior dislocation of the radial head. On the basis of this finding, we performed an osteotomy on the ulna and laterally rotated the proximal radioulnar joint achieving radial head reduction and restoring the anatomical relationship between the radial head and the capitellum. Clinical and radiographical evaluation of the elbow was performed before surgery and at postoperative follow-up. All patients were followed for 13 to 45 months after surgery. Elbow radiography showed that the radiocapitellar joint was reduced in all patients at the last follow-up visit and that the carrying angle was decreased relative to that in the preoperative condition. Elbow stability and the range of elbow flexion motion were improved at the last follow-up. We did not observe ulnar osteotomy site nonunion or elbow osteoarthritis in these patients. Furthermore, radial head dislocation did not recur. At early follow-up, ulnar rotation osteotomy was a safe and effective method for the treatment of congenital anterior dislocation of the radial head. Therapeutic IV. Copyright © 2015 American Society for Surgery of the Hand. Published by Elsevier Inc. All rights reserved.
Olms, Kai; Randt, Thorsten; Reimers, Nils; Zander, Nils; Schulz, Arndt P
2014-01-01
Reconstructive osteotomies for the treatment of Hallux valgus are among the most prevalent procedures in foot and ankle surgery. The combination of biodegradable materials with an innovative method for fixation by application of ultrasonic energy facilitates a new bonding method for fractures or osteotomies. As clinical experience is still limited, the aim of this study was to assess the safety and performance of the SonicPin system for fixation of Austin/Chevron osteotomies. Chevron osteotomy was performed on 30 patients for the treatment of Hallux valgus. The used SonicPins were made from polylactide and are selectively melted into the cancellous bone structure during insertion by ultrasonic energy. Patients were followed for one year, which included X-ray and MRI examinations as well as evaluation of life quality by EQ-5D (EuroQol). The MRI after three months showed adequate bone healing in all cases and no signs of foreign body reactions, which was again confirmed by MRI 12 months postoperatively. The bony healing after 12 months was uneventful without any signs of foreign body reactions. In summary, based on the low complication rate and the significant improvement in health related quality of life (EQ-5D) reported in this study, fixation of an Austin/Chevron osteotomy with a SonicPin for treatment of Hallux valgus can be considered to be safe and efficient over the short term. Therapeutic Level III.
Matzaroglou, Charalambos; Bougas, Panagiotis; Panagiotopoulos, Elias; Saridis, Alkis; Karanikolas, Menelaos; Kouzoudis, Dimitris
2010-04-22
Hallux valgus is a very common foot disorder, with its prevalence estimated at 33% in adult shoe-wearing populations. Conservative management is the initial treatment of choice for this condition, but surgery is sometimes needed. The 60(0) angle Chevron osteotomy is an accepted method for correction of mild to moderate hallux valgus in adults less than 60 years old. A modified 90(0) angle Chevron osteotomy has also been described; this modified technique can confer some advantages compared to the 60(0) angle method, and reported results are good. In the current work we present clinical data from a cohort of fifty-one female patients who had surgery for sixty-two hallux valgus deformities. In addition, in order to get a better physical insight and study the mechanical stresses along the two osteotomies, Finite Element Analysis (FEA) was also conducted. FEA indicated enhanced mechanical bonding with the modified 90(0) Chevron osteotomy, because the compressive stresses that keep the two bone parts together are stronger, and the shearing stresses that tend to slide the two bone parts apart are weaker, compared to the typical 60(0) technique. Follow-up data on our patient cohort show good or excellent long-term clinical results with the modified 90(0) angle technique. These results are consistent with the FEA-based hypothesis that a 90(0) Chevron osteotomy confers certain mechanical advantages compared to the typical 60(0) procedure.
Olms, Kai; Randt, Thorsten; Reimers, Nils; Zander, Nils; Schulz, Arndt P.
2014-01-01
Reconstructive osteotomies for the treatment of Hallux valgus are among the most prevalent procedures in foot and ankle surgery. The combination of biodegradable materials with an innovative method for fixation by application of ultrasonic energy facilitates a new bonding method for fractures or osteotomies. As clinical experience is still limited, the aim of this study was to assess the safety and performance of the SonicPin system for fixation of Austin/Chevron osteotomies. Chevron osteotomy was performed on 30 patients for the treatment of Hallux valgus. The used SonicPins were made from polylactide and are selectively melted into the cancellous bone structure during insertion by ultrasonic energy. Patients were followed for one year, which included X-ray and MRI examinations as well as evaluation of life quality by EQ-5D (EuroQol). The MRI after three months showed adequate bone healing in all cases and no signs of foreign body reactions, which was again confirmed by MRI 12 months postoperatively. The bony healing after 12 months was uneventful without any signs of foreign body reactions. In summary, based on the low complication rate and the significant improvement in health related quality of life (EQ-5D) reported in this study, fixation of an Austin/Chevron osteotomy with a SonicPin for treatment of Hallux valgus can be considered to be safe and efficient over the short term. Level of Clinical Evidence: Therapeutic Level III. PMID:24851140
Comparative study of scarf and extended chevron osteotomies for correction of hallux valgus.
Vopat, Bryan G; Lareau, Craig R; Johnson, Julie; Reinert, Steven E; DiGiovanni, Christopher W
2013-12-01
Scarf and chevron osteotomies are two described treatments for the correction of hallux valgus deformity, but they have traditionally been employed for different levels of severity. We hypothesized that there would be no statistically significant difference between the results of these two treatments. This study is a retrospective review of 70 consecutive patients treated operatively for moderate and severe hallux valgus malalignment. The two groups based on their operative treatment: scarf osteotomy (Group A) and extended chevron osteotomy (Group B). Preoperative and postoperative hallux valgus angle (HVA), intermetatarsal angle and distal metatarsal articular angle (DMAA) were measured at final follow-up. Charts were also assessed to determine the postoperative rate of satisfaction, stiffness, and pain. There were no statistically significant differences between Groups A and B with regard to the HVA preoperatively and postoperatively. The DMAA was statistically significantly higher for Group B both preoperatively (p=0.0403) and postoperatively (p<0.0001). The differences in HVA correction and IMA correction were not statistically significant. There were no statistically significant differences with regard to post-operative stiffness, pain, and satisfaction. The scarf and extended chevron osteotomies are capable of adequately reducing the HVA and IMA in patients with moderate to severe hallux valgus. These two techniques yielded similar patient outcomes in terms of stiffness, pain and satisfaction. Based on these results, we recommend both the scarf and extended chevron osteotomy as acceptable forms of correction for moderate to severe hallux valgus.
Surgical anatomy of medial open-wedge high tibial osteotomy: crucial steps and pitfalls.
Madry, Henning; Goebel, Lars; Hoffmann, Alexander; Dück, Klaus; Gerich, Torsten; Seil, Romain; Tschernig, Thomas; Pape, Dietrich
2017-12-01
To give an overview of the basic knowledge of the functional surgical anatomy of the proximal lower leg and the popliteal region relevant to medial high tibial osteotomy (HTO) as key anatomical structures in spatial relation to the popliteal region and the proximal tibiofibular joint are usually not directly visible and thus escape a direct inspection. The surgical anatomy of the human proximal lower leg and its relevance for HTO are illustrated with a special emphasis on the individual steps of the operation involving creation of the osteotomy planes and plate fixation. The posteriorly located popliteal neurovascular bundle, but also lateral structures such as the peroneal nerve, the head of the fibula and the lateral collateral ligament must be protected from the instruments used for osteotomy. Neither positioning the knee joint in flexion, nor the posterior thin muscle layer of the popliteal muscle offers adequate protection of the popliteal neurovascular bundle when performing the osteotomy. Tactile feedback through a loss-of-resistance when the opposite cortex is perforated is only possible when sawing and drilling is performed in a pounding fashion. Kirschner wires with a proximal thread, therefore, always need to be introduced under fluoroscopic control. Due to anatomy of the tibial head, the tibial slope may increase inadvertently. Enhanced surgical knowledge of anatomical structures that are at a potential risk during the different steps of osteotomy or plate fixation will help to avoid possible injuries. Expert opinion, Level V.
Effects of long-term administration of carprofen on healing of a tibial osteotomy in dogs.
Ochi, Hiroki; Hara, Yasushi; Asou, Yoshinori; Harada, Yasuji; Nezu, Yoshinori; Yogo, Takuya; Shinomiya, Kenichi; Tagawa, Masahiro
2011-05-01
To evaluate effects of long-term administration of carprofen on healing of a tibial osteotomy in dogs. 12 healthy female Beagles. A mid-diaphyseal transverse osteotomy (stabilized with an intramedullary pin) of the right tibia was performed in each dog. The carprofen group (n = 6 dogs) received carprofen (2.2 mg/kg, PO, q 12 h) for 120 days; the control group (6) received no treatment. Bone healing and change in callus area were assessed radiographically over time. Dogs were euthanized 120 days after surgery, and tibiae were evaluated biomechanically and histologically. The osteotomy line was not evident in the control group on radiographs obtained 120 days after surgery. In contrast, the osteotomy line was still evident in the carprofen group. Callus area was significantly less in the carprofen group, compared with the area in the control group, at 20, 30, and 60 days after surgery. At 120 days after surgery, stiffness, elastic modulus, and flexural rigidity in the carprofen group were significantly lower than corresponding values in the control group. Furthermore, histologic evaluation revealed that the cartilage area within the callus in the carprofen group was significantly greater than that in the control group. Long-term administration of carprofen appeared to inhibit bone healing in dogs that underwent tibial osteotomy. We recommend caution for carprofen administration when treating fractures that have delays in healing associated with a reduction in osteogenesis as well as fractures associated with diseases that predispose animals to delays of osseous repair.
Is Bone Grafting Necessary in the Treatment of Malunited Distal Radius Fractures?
Disseldorp, Dominique J. G.; Poeze, Martijn; Hannemann, Pascal F. W.; Brink, Peter R. G.
2015-01-01
Background Open wedge osteotomy with bone grafting and plate fixation is the standard procedure for the correction of malunited distal radius fractures. Bone grafts are used to increase structural stability and to enhance new bone formation. However, bone grafts are also associated with donor site morbidity, delayed union at bone–graft interfaces, size mismatch between graft and osteotomy defect, and additional operation time. Purpose The goal of this study was to assess bone healing and secondary fracture displacement in the treatment of malunited distal radius fractures without the use of bone grafting. Methods Between January 1993 and December 2013, 132 corrective osteotomies and plate fixations without bone grafting were performed for malunited distal radius fractures. The minimum follow-up time was 12 months. Primary study outcomes were time to complete bone healing and secondary fracture displacement. Preoperative and postoperative radiographs during follow-up were compared with each other, as well as with radiographs of the uninjured side. Results All 132 osteotomies healed. In two cases (1.5%), healing took more than 4 months, but reinterventions were not necessary. No cases of secondary fracture displacement or hardware failure were observed. Significant improvements in all radiographic parameters were shown after corrective osteotomy and plate fixation. Conclusion This study shows that bone grafts are not required for bone healing and prevention of secondary fracture displacement after corrective osteotomy and plate fixation of malunited distal radius fractures. Level of evidence Therapeutic, level IV, case series with no comparison group PMID:26261748
Park, H-W; Lee, K-B; Chung, J-Y; Kim, M-S
2013-04-01
Severe hallux valgus deformity is conventionally treated with proximal metatarsal osteotomy. Distal metatarsal osteotomy with an associated soft-tissue procedure can also be used in moderate to severe deformity. We compared the clinical and radiological outcomes of proximal and distal chevron osteotomy in severe hallux valgus deformity with a soft-tissue release in both. A total of 110 consecutive female patients (110 feet) were included in a prospective randomised controlled study. A total of 56 patients underwent a proximal procedure and 54 a distal operation. The mean follow-up was 39 months (24 to 54) in the proximal group and 38 months (24 to 52) in the distal group. At follow-up the hallux valgus angle, intermetatarsal angle, distal metatarsal articular angle, tibial sesamoid position, American Orthopaedic Foot and Ankle Society (AOFAS) hallux metatarsophalangeal-interphalangeal score, patient satisfaction level, and complications were similar in each group. Both methods showed significant post-operative improvement and high levels of patient satisfaction. Our results suggest that the distal chevron osteotomy with an associated distal soft-tissue procedure provides a satisfactory method for correcting severe hallux valgus deformity.
Assessment of acetabular retroversion following long term review of Salter's osteotomy.
Robb, Curtis A; Datta, Amit; Nayeemuddin, Mohammed; Bache, Christopher E
2009-01-01
Salter's innominate osteotomy may predispose to anterior over-coverage of the acetabulum. Over cover or retroversion has been demonstrated to be a cause of hip pain, impingement and subsequent osteoarthritis. We reviewed the long-term follow up of seventeen skeletally mature hips in sixteen patients who had previously undergone a Salter's osteotomy in childhood. The Salter pelvic osteotomy was performed at a mean average age of 5 years and follow up at a mean average age of 20 years. Patients were assessed by clinical examination for signs of impingement, Harris Hip Score and pelvic radiograph. Acetabular version was evaluated by the relationship between anterior and posterior walls of the acetabulum using templates applied to the pelvic radiograph as described by Hefti. The median acetabular cover averaged 17 degrees of anteversion with 2 patients (12%) demonstrating retroversion, neither of whom, had signs of impingement on examination. The mean average Harris Hip Score was 85 indicating a good outcome at long-term follow-up. We believe acetabular remodelling may occur with age after Salter's innominate osteotomy and have found good results in patients after skeletal maturation. Fears of long-term anterior over-coverage and retroversion with this operation may be unfounded.
Wang, Xiaohu; Wei, Lei; Lv, Zhi; Zhao, Bin; Duan, Zhiqing; Wu, Wenjin; Zhang, Bin; Wei, Xiaochun
2017-02-01
Objective To explore the effects of proximal fibular osteotomy as a new surgery for pain relief and improvement of medial joint space and function in patients with knee osteoarthritis. Methods From January 2015 to May 2015, 47 patients who underwent proximal fibular osteotomy for medial compartment osteoarthritis were retrospectively followed up. Preoperative and postoperative weight-bearing and whole lower extremity radiographs were obtained to analyse the alignment of the lower extremity and ratio of the knee joint space (medial/lateral compartment). Knee pain was assessed using a visual analogue scale, and knee ambulation activities were evaluated using the American Knee Society score preoperatively and postoperatively. Results Medial pain relief was observed in almost all patients after proximal fibular osteotomy. Most patients exhibited improved walking postoperatively. Weight-bearing lower extremity radiographs showed an average increase in the postoperative medial knee joint space. Additionally, obvious correction of alignment was observed in the whole lower extremity radiographs in 8 of 47 patients. Conclusions The present study demonstrates that proximal fibular osteotomy effectively relieves pain and improves joint function in patients with medial compartment osteoarthritis at a mean of 13.38 months postoperatively.
Total hip arthroplasty of dysplastic hip after previous Chiari pelvic osteotomy.
Minoda, Yukihide; Kadowaki, Toru; Kim, Mitsunari
2006-08-01
Many reports have suggested that Chiari pelvic osteotomy would improve the results of acetabular component placement and fixation in subsequent total hip arthroplasty. However, little is known concerning the biomechanical, radiological, and clinical effects of Chiari pelvic osteotomy on subsequent total hip arthroplasty. Ten total hip arthroplasties for developmental dysplasia of the hip after previous Chiari pelvic osteotomy (Chiari group) were compared with 20 total hip arthroplasties for developmental dysplasia of the hip without previous surgery (control group). Preoperative patient demographic data and operative technique were well matched between the groups. The mean duration of follow-up was 3.0 years. Biomechanical, radiological, and clinical evaluations were performed. No acetabular or femoral components exhibited loosening. All patients had good or excellent clinical score according to the Merle d'Aubigne-Postel rating system at the most recent follow-up. Abductor force and joint force were smaller in the Chiari group, although long operative time, more blood loss, and verticalization of joint force were noted in this group. This limited study suggested that Chiari pelvic osteotomy changed the biomechanical features of the hip joint, and that this alteration might have compromised subsequent total hip arthroplasty.
Pereira, Cassiano Costa Silva; Batista, Fábio Roberto de Souza; Jacob, Ricardo Garcia Mureb; Nogueira, Lamis Meorin; Carvalho, Abrahão Cavalcante Gomes de Souza; Gealh, Walter Cristiano; Garcia-Júnior, Idelmo Rangel; Okamoto, Roberta
2018-05-08
To evaluate the effect of reusing drills and piezosurgery tips during implant osteotomy on immediate bone cell viability through immunohistochemical analysis. Six male rabbits were divided into 2 groups and then divided into 5 subgroups-correspond to drills and tips used 10, 20, 30, 40, and 50 times, respectively. All animals received 10 osteotomies in each tibia, by use of the classic drilling procedure in one group (G1) and the piezosurgery device in the other group (G2). For immunohistochemical technique were utilized the osteoprotegerin, RANKL, osteocalcin, and caspase 3. Control procedures were performed by omitting the primary antibodies (negative control). Bone formation and resorption responses presented in more intense way during the piezosurgery. The expression of osteocalcin had become quite intense in piezosurgery groups, but with reduced immunostaining from the 30th osteotomy. The caspase 3 showed the viability of the osteoblast from the 20th osteotomy with piezosurgery and remained constant until the 50th. Piezosurgery provides greater osteoblastic cell viability than the system of conventional drilling. This study will provide data so that the authors can recycle the drills and tips for implant placement, thus enabling a better cell viability for osseointegration.
The Gibson and Piggott osteotomy for adult hallux valgus.
Rangrez, Arshad Bashir; Dar, Tahir Ahmed; Badoo, Abdul Rashid; Wani, Sharief Ahmed; Dhar, Shabir Ahmed; Mumtaz, Imran; Ahmed, Muzzaffar
2012-01-01
The Gibson and Piggott procedure for hallux valgus is based on sound surgical principles addressing the basic pathologies of this disorder. However, this procedure has not been studied extensively in the literature in comparison to the Mitchell and Chevron osteotomies. We report a prospective study conducted on 50 adult feet with hallux valgus. The Gibson and Piggot osteotomy was done on all the feet. We obtained 76% excellent and 18% good results with this procedure. The results bear out the fact that this procedure is a useful procedure for the management of this disorder.
Blood supply to the first metatarsal head and vessels at risk with a chevron osteotomy.
Malal, J J George; Shaw-Dunn, J; Kumar, C Senthil
2007-09-01
Chevron osteotomy, a commonly performed procedure for the treatment of hallux valgus, results in osteonecrosis of the first metatarsal head in 0% to 20% of cases. The aim of this study was to map out the arrangement of the vascular supply to the first metatarsal head and its relationship to the limbs of the chevron osteotomy. Ten cadaveric lower limbs were injected with an India ink-latex mixture, and the feet were dissected to assess the blood supply to the first metatarsal head. The dissection was carried out by tracing the branches of the dorsalis pedis and posterior tibial vessels. A distal chevron osteotomy was mapped, with the limbs of the osteotomy set at an angle of 60 degrees from the geometric center of the first metatarsal head. The relationship of the limbs of the osteotomy to the blood vessels was recorded. The first metatarsal head was found to be supplied by branches from the first dorsal metatarsal, first plantar metatarsal, and medial plantar arteries. The first dorsal metatarsal artery was the dominant vessel among the three arteries in eight specimens. All of the vessels formed a plexus at the plantar-lateral aspect of the metatarsal neck, just proximal to the capsular attachment, with a varying number of branches from the plexus then entering the metatarsal head. The plantar limb of the proposed chevron cuts exited through this plexus of vessels in all specimens. Contrary to the widely held view, only minor vascular branches could be found entering the dorsal aspect of the neck. The identification of the plantar-lateral corner of the metatarsal neck as the major site of vascular ingress into the first metatarsal head suggests that constructing the chevron osteotomy with a long plantar limb exiting well proximal to the capsular attachment may decrease the postoperative prevalence of osteonecrosis of the first metatarsal head.
Megas, Panagiotis; Georgiou, Christos S; Panagopoulos, Andreas; Kouzelis, Antonis
2014-12-31
The transfemoral and the extended trochanteric osteotomies are the most common osteotomies used in femoral revision, both when proximal or diaphyseal fixation of the new component has been decided. We present an alternative approach to the trochanteric osteotomies, most frequently used with distally fixated stems, to overcome their shortcomings of osteotomy migration and nonunion, but, most of all, the uncontrollable fragmentation of the femur. The procedure includes a complete circular femoral osteotomy just below the stem tip to prevent distal fracture propagation and a subsequent preplanned segmentation of the proximal femur for better exposure and fast removal of the old prosthesis. The bone fragments are reattached with cerclage wires to the revision prosthesis, which is safely anchored distally. A modified posterolateral approach is used, as the preservation of the continuity of the abductors, the greater trochanter, and the vastus lateralis is a prerequisite. Between 2006 and 2012, 47 stems (33 women, 14 men, mean age 68 years, range 39-88 years) were revised using this technique. They were 12 (26%) stable and 35 (74%) loose prostheses and were all revised to tapered, fluted, grit-blasted stems. No fracture of the trochanters or the distal femur occurred intraoperatively. Mean follow-up was 28 months (range 6-70 months). No case of trochanteric migration or nonunion of the osteotomies was recorded. Restoration of the preexisting bone defects occurred in 83% of the patients. Three patients required repeat revision due to dislocation and one due to a postoperative periprosthetic fracture. None of the failures was attributed to the procedure itself. This new osteotomy technique may seem aggressive at first, but, at least in our hands, has effectively increased the speed of the femoral revision, particularly for the most difficult well-fixed components, but not at the expense of safety.
Bachour, E; Coloma, P; Freitas, E; Messerer, R; Michel, F; Barrey, C
2016-12-01
We report a case of three patients treated with pedicle subtraction osteotomy for post-vertebroplasty kyphosis. These patients were initially treated with a vertebroplasty for vertebral fracture (two cases) and spinal lymphoma (1 case). All of these patients worsened progressively on a clinical and radiographic level with progression of the spinal deformity in the form of kyphosis. The surgery consisted of transpedicular osteotomy instrumented at the level of the vertebra cemented with maximum removal of intra-corporeal cement. One of the three patients required a supplementary anterior approach to achieve good quality bone fusion. In all three cases the post-vertebroplasty kyphosis was able to be reduced by at least 50 % emphasizing the feasibility and relevance of the pedicle subtraction osteotomy in a context of cemented vertebra. Copyright © 2016 Elsevier Masson SAS. All rights reserved.
Bridwell, Keith H
2006-09-01
Author experience and literature review. To investigate and discuss decision-making on when to perform a Smith-Petersen osteotomy as opposed to a pedicle subtraction procedure and/or a vertebral column resection. Articles have been published regarding Smith-Petersen osteotomies, pedicle subtraction procedures, and vertebral column resections. Expectations and complications have been reviewed. However, decision-making regarding which of the 3 procedures is most useful for a particular spinal deformity case is not clearly investigated. Discussed in this manuscript is the author's experience and the literature regarding the operative options for a fixed coronal or sagittal deformity. There are roles for Smith-Petersen osteotomy, pedicle subtraction, and vertebral column resection. Each has specific applications and potential complications. As the magnitude of resection increases, the ability to correct deformity improves, but also the risk of complication increases. Therein, an understanding of potential applications and complications is helpful.
Does creating a subperiosteal tunnel influence the periorbital edema and ecchymosis in rhinoplasty?
Kara, Cüneyt Orhan; Kara, Inci Gökalan; Topuz, Bülent
2005-08-01
The study goal was to determine whether creating a subperiosteal tunnel before lateral osteotomy had an effect on postoperative periorbital edema, ecchymosis, and subconjunctival ecchymosis. Eighteen consecutive patients who underwent septorhinoplasty were included in the study. In all patients lateral osteotomies were carried out bilaterally, after creating a subperiosteal tunnel on a randomly chosen side and without creating a subperiosteal tunnel on the other side. The patients were seen on the second postoperative day, and a different surgeon who was unaware of the side with the periosteal tunnel determined the side of the face with more edema and ecchymosis. Subconjunctival ecchymosis was evaluated and recorded, as well. Creating subperiosteal tunnels before lateral osteotomy statistically increased periorbital ecchymosis. Although there was no statistically significant difference, creating subperiosteal tunnels also increased development and severity of subconjunctival ecchymosis and edema. We suggest performing lateral osteotomy without creating subperiosteal tunnels.
Neck osteotomy for malunion of neglected radial neck fractures in children: a report of 2 cases.
Ceroni, Dimitri; Campos, José; Dahl-Farhoumand, Agnes; Holveck, Jérôme; Kaelin, André
2010-01-01
Radial neck fractures are a common injury in children as a result of a fall on an extended and supinated outstretched hand. We present 2 cases of osteotomy of the neck of the radius performed in 2 children with neglected radial neck fractures. Preoperatively, both patients complained of pain and severely reduced mobility of the elbow. Surgery was performed at 6 weeks and 3 months, respectively, after the initial injury and the 2 children were reviewed at 6 and 16 months follow-up. Osteotomies healed within the usual time and no avascular necrosis of the radial head, proximal radioulnar synostosis, or myositis ossificans were observed. The Mayo Elbow Performance Index Score improved significantly after the operation with the 2 patients rated as excellent. In this small series, we present a novel technique of proximal osteotomy of the radius to correct this deformity in children. Case series, level IV evidence.
[Stimulation and evaluation on maxillary distraction osteogenesis using CASSOS 2001].
Zhu, Min; Qiu, Wei-liu; Tang, You-sheng; Li, Qing-yun
2002-09-01
To simulate maxillary distraction osteogenesis and evaluate the change of soft and hard tissue before and after treatment, using Computer-Assisted Simulation System for Orthognathic Surgery( CASSOS 2001). A fourteen-year-old boy with severe maxillary hypoplasia, due to unilateral cleft lip and palate, was analysed by cephalometric analysis. The simulations of maxillary distraction osteogenesis (Le Fort I osteotomy and Le Fort II osteotomy) were re-analysed. After the treatment, cephalometric analysis was preformed again. The data were compared. The maxillary hypoplasia was well treated using maxillary distraction osteogenesis; Compared with Le fort I osteotomy, more satisfactory results can be obtained by Le fort I distraction osteogenesis. Maxillary distraction osteogenesis is a better way to treat severe maxillary hypoplasia with operated CLP than maxillary osteotomy. CASSOS 2001 can help surgeons and patients on simulation and evaluation of maxillary distraction osteogenesis, and on decision of treatment plan.
Ma, Li; Stübinger, Stefan; Liu, Xi Ling; Schneider, Urs A; Lang, Niklaus P
2013-08-01
The purpose of this study was to compare bone healing of experimental osteotomies applying either piezosurgery or two different oscillating saw blades in a rabbit model. The 16 rabbits were randomly assigned into four groups to comply with observation periods of one, two, three and five weeks. In all animals, four osteotomy lines were performed on the left and right nasal bone using a conventional saw blade, a novel saw blade and piezosurgery. All three osteotomy techniques revealed an advanced gap healing starting after one week. The most pronounced new bone formation took place between two and three weeks, whereby piezoelectric surgery revealed a tendency to faster bone formation and remodelling. Yet, there were no significant differences between the three modalities. The use of a novel as well as the piezoelectric bone-cutting instrument revealed advanced bone healing with a favourable surgical performance compared to a traditional saw.
Li, Xigong; Lu, Yang; Sun, Junying; Lin, Xiangjin; Tang, Tiansi
2017-02-01
The purpose of this study was to evaluate the functional and radiographic results of patients with Crowe type-IV hip dysplasia treated by cementless total hip arthroplasty and double chevron subtrochanteric osteotomy. From January 2000 to February 2006, cementless total hip arthroplasty with a double chevron subtrochanteric shortening osteotomy was performed on 18 patients (22 hips) with Crowe type-IV dysplasia. The acetabular cup was placed in the position of the anatomic hip center, and subtrochanteric femoral shortening osteotomy was performed with the use of a double chevron design. The clinical and radiographic outcomes were reviewed with a mean follow-up of 6.5 years (5-10 years). The mean amount of femoral subtrochanteric shortening was 38 mm (25-60 mm). All osteotomy sites were healed by 3-6 months without complications. The mean Harris Hip Score improved significantly from 47 points (35-65 points) preoperatively to 88 points (75-97 points) at the final follow-up. The Trendelenburg sign was corrected from a positive preoperative status to a negative postoperative status in 12 of 22 hips. No acetabular and femoral components have loosened or required revision during the period of follow-up. Cementless total hip arthroplasty using double chevron subtrochanteric osteotomy allowed for restoration of anatomic hip center with safely functional limb lengthening, achieved correction of preoperative limp, and good functional and radiographic outcomes for 22 Crowe type-IV dislocation hips at the time of the 5- to 10-year follow-up. Copyright © 2016 Elsevier Inc. All rights reserved.
Improvement of the knee center of rotation during walking after opening wedge high tibial osteotomy.
Kim, Kyungsoo; Feng, Jun; Nha, Kyung Wook; Park, Won Man; Kim, Yoon Hyuk
2015-06-01
Accurate measurement of the center of rotation of the knee joint is indispensable for prediction of joint kinematics and kinetics in musculoskeletal models. However, no study has yet identified the knee center of rotations during several daily activities before and after high tibial osteotomy surgery, which is one surgical option for treating knee osteoarthritis. In this study, an estimation method for determining the knee joint center of rotation was developed by applying the optimal common shape technique and symmetrical axis of rotation approach techniques to motion-capture data and validated for typical activities (walking, squatting, climbing up stairs, walking down stairs) of 10 normal subjects. The locations of knee joint center of rotations for injured and contralateral knees of eight subjects with osteoarthritis, both before and after high tibial osteotomy surgery, were then calculated during walking. It was shown that high tibial osteotomy surgery improved the knee joint center of rotation since the center of rotations for the injured knee after high tibial osteotomy surgery were significantly closer to those of the normal healthy population. The difference between the injured and contralateral knees was also generally reduced after surgery, demonstrating increased symmetry. These results indicate that symmetry in both knees can be recovered in many cases after high tibial osteotomy surgery. Moreover, the recovery of center of rotation in the injured knee was prior to that of symmetry. This study has the potential to provide fundamental information that can be applied to understand abnormal kinematics in patients, diagnose knee joint disease, and design a novel implants for knee joint surgeries. © IMechE 2015.
[Modified PemberSal osteotomy technique with lyophilized human allograft].
Druschel, C; Heck, K; Kraft, C; Placzek, R
2016-12-01
PemberSal osteotomy to improve femoral head coverage by rotating the acetabular roof ventrally and laterally. Insufficient coverage of the femoral head, and can be combined with other surgical procedures such as femoral intertrochanteric varus-derotation osteotomy and open reduction for developmental dysplasia and dislocation of the hip or to improve sphericity and containment in Legg-Calvé-Perthes disease. This specific acetabuloplasty can only be performed in patients with an open epiphyseal growth-plate. Increased bleeding tendency (e.g., inherited or iatrogenic); elevated anesthetic risk such as in cerebral palsy, arthrogryposis multiplex congenital, trisomies; syndromes require explicit interdisciplinary clarification to reduce perioperative risks; infections as in other elective surgeries; diseases/deformities making postoperative spica casting impossible or impractical (e.g., deformities of spinal cord or urogenital system, hernias requiring treatment); closed epiphyseal plate requires complex three-dimensional corrections of the acetabular roof (e.g., triple/periacetabular osteotomy). Osteotomy from the iliac bone to the posterior ilioischial arm of the epiphyseal growth-plate cartilage; controlled fracture of the cancellous bone without breaking the medial cortex of the iliac bone for ventrocaudal rotation of the acetabular roof. To refill and stabilize the osteotomy site, an allogenic bone-wedge is interponated and secured by a resorbable screw or kirschner wire. This method also allows more complex reconstructions of the acetabular roof, e.g., by including the pseudo-cup in a modified Rejholec technique. A spica cast is applied to immobilize the hip for 6 weeks. Afterwards physiotherapy can be performed under weight-bearing as tolerated. Radiographic check-ups every 6 months.
Ueno, Daisuke; Nakamura, Kei; Kojima, Kousuke; Toyoshima, Takeshi; Tanaka, Hideaki; Ueda, Kazuhiko; Koyano, Kiyoshi; Kodama, Toshiro
2018-04-01
Simultaneous vertical ridge augmentation (VRA) can reduce treatment procedures and surgery time, but the concomitant reduction in primary stability (PS) of a shallow-placed implant imparts risk to its prognosis. Although several studies have reported improvements in PS, there is little information from any simultaneous VRA model. This study aimed to evaluate whether tapered implants with stepwise under-prepared osteotomy could improve the PS of shallow-placed implants in an in vitro model of simultaneous VRA. Tapered implants (Straumann ® Bone Level Tapered implant; BLT) and hybrid implants (Straumann ® Bone Level implant; BL) were investigated in this study. A total of 80 osteotomies of different depths (4, 6, 8, 10 mm) were created in rigid polyurethane foam blocks, and each BLT and BL was inserted by either standard (BLT-S, BL-S) or a stepwise under-prepared (BLT-U, BL-U) osteotomy protocol. The PS was evaluated by measuring maximum insertion torque (IT), implant stability quotient (ISQ), and removal torque (RT). The significance level was set at P < 0.05. There were no significant differences in IT, ISQ or RT when comparing BLT-S and BL-S or BLT-U and BL-U at placement depths of 6 and 8 mm. When comparison was made between osteotomy protocols, IT was significantly greater in BLT-U than in BLT-S at all placement depths. A stepwise under-prepared osteotomy protocol improves initial stability of a tapered implant even in a shallow-placed implant model. BLT-U could be a useful protocol for simultaneous VRA.
Mortazavi, S M J; Heidari, P; Esfandiari, H; Motamedi, M
2008-01-01
Flexion deformity of the haemophilic knee is a considerable cause of disability and may need to be managed surgically in severe cases. We have used a trapezoid supracondylar femoral extension osteotomy to correct severe knee flexion deformity. Nine severe haemophilic patients with contractures >30 degrees that were unresponsive to conservative measures underwent 11 trapezoid osteotomies. The angle of deformity was measured using anteroposterior and lateral knee X-ray films at maximum extension. Factor levels of 80-100% were achieved before the operation. A trapezoid osteotomy of the distal femur bone was performed using a lateral approach. The frontal plane angular deformity (if any) was corrected at the same time. The osteotomy site was fixed using an Arbeitsgemeinschaft für Osteo synthesefragen (AO) condylar blade plate. Following surgery, the knee was supported by a plaster splint at 20 degrees of flexion. Physiotherapy was started on third postoperative day and continued three times a week. There was no serious complication. The deformities were corrected in all of the patients and the mean range of motion increased form 68.6 degrees to 98.1 degrees . Bleeding episodes decreased in all four knees which had a bleeding score of 3 before surgery. Using the Orthopaedic Advisory Committee of the World Federation of Haemophilia scores, nine good and two fair results were obtained. All patients regained the ability to walk for both short and long distance without any aid, climb the stairs, bath, and use public transportation. Trapezoid supracondylar femoral extension osteotomy should be considered in the surgical management of severe haemophilic flexion deformity of the knee joint.
Sverzut, Cássio Edvard; Lucas, Marina Amaral; Sverzut, Alexander Tadeu; Trivellato, Alexandre Elias; Beloti, Marcio Mateus; Rosa, Adalberto Luiz; de Oliveira, Paulo Tambasco
2008-01-01
The objective of this study was to evaluate the bone repair along a mandibular body osteotomy after using a 2.0 miniplate system. Nine adult mongrel dogs were subjected to unilateral continuous defect through an osteotomy between the mandibular 3rd and 4th premolars. Two four-hole miniplates were placed in accordance with the Arbeitgeimeinschaft für Osteosynthesefragen Manual. Miniplates adapted to the alveolar processes were fixed monocortically with 6.0-mm-length titanium alloy self-tapping screws, whereas miniplates placed near the mandible bases were fixed bicortically. At 2, 6 and 12 weeks, three dogs were sacrificed per period, and the osteotomy sites were removed, divided into three thirds (Tension Third, TT; Intermediary Third, IT; Compression Third, CT) and prepared for conventional and polarized light microscopy. At 6 weeks, while the CT repaired faster and showed bone union by woven bone formation, the TT and IT exhibited a ligament-like fibrous connective tissue inserted in, and connecting, newly formed woven bone overlying the parent lamellar bone edges. At 12 weeks, bone repair took place at all thirds. Histometrically, proportions of newly formed bone did not alter at TT, IT and CT, whereas significantly enhanced bone formation was observed for the 12-week group, irrespective of the third. The results demonstrated that although the method used to stabilize the mandibular osteotomy allowed bone repair to occur, differences in the dynamics of bone healing may take place along the osteotomy site, depending on the action of tension and compression forces generated by masticatory muscles. PMID:18336526
Lamm, Bradley M; Gesheff, Martin G; Salton, Heather L; Dupuis, Travis W; Zeni, Ferras
2012-01-01
The Dwyer calcaneal osteotomy is an effective procedure for the correction of calcaneal varus deformity. However, no intraoperative method has been described to determine the amount of bone resection. We describe a simple intraoperative method for assuring accurate bone resection and measure the realignment effects of the Dwyer calcaneal osteotomy. We also review radiographic outcomes associated with 20 Dwyer calcaneal osteotomies (in 17 patients) using the intraoperative realignment technique described in this report. Preoperative and postoperative radiographs at a mean of 2.5 (range 1.5 to 5) years taken after Dwyer osteotomy were measured and compared, which revealed a mean reduction in calcaneal varus of 18° (range 2° to 36°) (p < .001), a mean decrease in the calcaneal inclination angle of 5° (range -40° to 7°) (p < .05), a mean decrease in medial calcaneal translation of 10 (range 0 to 18) mm (p < .001) relative to the tibia, and a mean dorsal translation of 2 (range 0 to 7) mm (p = .002). In an effort to attempt to structurally realign the calcaneus to a more rectus alignment, by means of Dwyer osteotomy, we recommend the use of the intraoperative bone wedge resection technique described in this report. Our experience with the patients described in this report demonstrates the usefulness of the intraoperative method that we describe in order to accurately restore the axial tibial and calcaneal relationship. Copyright © 2012 American College of Foot and Ankle Surgeons. Published by Elsevier Inc. All rights reserved.
Bryan, Andrew J; Sanders, Thomas L; Trousdale, Robert T; Sierra, Rafael J
2016-01-01
Bernese (Ganz) periacetabular osteotomy is associated with significant blood loss and the need for perioperative transfusion. Tranexamic acid decreases blood loss and minimizes transfusion rates in total joint arthroplasty. However, no reports have described its use in patients undergoing Bernese periacetabular osteotomy. This study reports the use of intravenous tranexamic acid in these patients. The study included 137 patients (150 hips) who underwent isolated periacetabular osteotomy at a single institution between 2003 and 2014. Of these, 68 patients (75 hips) received intravenous tranexamic acid 1 g at the time of incision and 1 g at the time of closure. A group of 69 patients (75 hips) served as control subjects who underwent periacetabular osteotomy without administration of intravenous tranexamic acid. Thromboembolic disease was defined as deep venous thrombosis or pulmonary embolism occurring within 6 weeks of surgery. Outcomes measured included transfusion requirements, pre- and postoperative hemoglobin values, operative times, and thromboembolic disease rates. Aspirin was used as the thromboembolic prophylactic regimen in 95% of patients. The rate of allogeneic transfusion was 0 in the tranexamic acid group compared with 21% in the control group (P=.0001). No significant difference was found in the autologous cell salvage requirement (.96 vs 1.01; P=.43) or the thromboembolic disease rate between the tranexamic acid group and the control group (2.67% vs 1.33%; P=.31). The use of intravenous tranexamic acid led to a decreased transfusion requirement with no increased risk of thromboembolic disease in this contemporary cohort of patients undergoing periacetabular osteotomy. Copyright 2016, SLACK Incorporated.
Youngswick-Austin versus distal oblique osteotomy for the treatment of Hallux Rigidus.
Viladot, Antonio; Sodano, Luca; Marcellini, Lorenzo; Zamperetti, Marco; Hernandez, Elsa Sanchez; Perice, Ramon Viladot
2017-08-01
Hallux Rigidus is the most common degenerative joint pathology of the foot. Several procedures are described for the management of this deformity. In this prospective study we compared Youngswick-Austin and distal oblique osteotomy in the treatment of grade II Hallux Rigidus, in terms of clinical outcomes, efficacy and complications. Forty-six patients (50 feet) with moderate Hallux Rigidus (Regnauld grade II) were recruited and operated between March 2009 and December 2012. Surgical technique was Youngswick-Austin osteotomy (Group A) or distal oblique osteotomy (Group B). Mean follow-up was 42.7 ±12.2 (range, 24-70) months. Both groups achieved significant improvement of AOFAS score and first metatarsophalangeal joint range of motion (p value <.05). The mean AOFAS score improved from a preoperative score of 44.1 ±11.8 to 89.2 ± 9.4 (24 months) in Group A and from 40.9 ±11.3 to 89.5 ±7.2 (24 months) in Group B. At 24 months, the average improvement of first metatarsophalangeal joint range of motion was 20.9° in Group A and 22.4° in Group B. The postoperative AOFAS score and joint range of motion were comparable in both groups. For this specific patient population Youngswick-Austin and distal oblique osteotomies provides subjective patient improvement and increases the first metatarsophalangeal joint range of motion. The results of grade II Hallux Rigidus treatment were comparable when using a Youngswick-Austin or distal oblique osteotomy. Level II, prospective comparative study. Copyright © 2017 Elsevier Ltd. All rights reserved.
The Double Mandibular Osteotomy for Vascular and Tumor Surgery of the Parapharyngeal Space.
Schlieve, Thomas; Carlson, Eric R; Freeman, Michael; Buckley, Ryan; Arnold, Josh
2017-05-01
The purposes of this study are to describe our experience using a double mandibular osteotomy for access to the parapharyngeal space in vascular and tumor surgery and to report on the outcomes and complications of this procedure. We designed and implemented a case series to review the medical records of all patients treated with a double mandibular osteotomy for parapharyngeal space access from 1994 to 2016. Patient demographic characteristics, indications for the procedure, outcomes, and complications were recorded. A total of 17 patients underwent a double mandibular osteotomy procedure for access to the parapharyngeal space during the study period. There were 7 men (41%) and 10 women (59%) comprising the cohort. The average age was 57 years (range, 29 to 75 years). The follow-up period ranged from 6 to 98 months (mean, 40 months), and 7 patients (41%) were tobacco users at the time of surgery. The most common indication was high internal carotid artery stenosis (n = 6) followed by carotid body paraganglioma (n = 3). Average blood loss was 186 mL, and there were no deaths during the study period. Eight postoperative complications were noted in 7 patients (41%). No procedures were aborted or compromised because of inadequate parapharyngeal space access. All patients showed clinical and radiographic signs of healing of the osteotomy sites. The double mandibular osteotomy provides adequate access to the parapharyngeal space for effective tumor removal and high carotid surgical intervention with acceptable patient morbidity and complications. Copyright © 2016 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.
First metatarsal closing base wedge osteotomy using real-time fluoroscopy.
Toepp, F C; Salcedo, M
1991-01-01
A minimal incision surgery approach to metatarsus primus adductus is presented. The percutaneous closing base wedge osteotomy is performed using real-time intraoperative fluoroscopy. The advantages and disadvantages of this minimal incision surgical procedure are discussed.
Vk, Kandhari; Ss, Bava; Mm, Desai; Rn, Wade
2015-01-01
Fibrous dysplasia is a rare benign disorder of the skeletal system characterized by fibro osseous proliferation with intervening areas of normal or immature bone in the intramedullary region. It can either be a monostotic (involves one bone) or a polyostotic (involves more than one bone) presentation and usually occurs equally in males and females. Deformities like scoliosis and shepherd's crook deformity are frequently encountered in the polyostotic form. We report a rare managed case of bilateral non-union of the pathological fracture of femur neck with shepherd's crook deformity of the proximal femur in a case of polyostotic fibrous dysplasia. A 16 years old female case of polyostotic fibrous dysplasia had bilateral Shepherd's crook deformity of the proximal femur with bilateral non - union of pathological fracture of neck femur. We managed each side in one stage with two osteotomies. On the right side, first oblique osteotomy was done from just distal to the greater trochanter up to the level of the neck and the second; lateral closing wedge abduction osteotomy was done at the subtrochanteric level. 2 months later on the left side double lateral closing wedge abduction osteotomies were performed both at the subtrochanteric level. Fixation of both the sides was done using a 135° Dynamic Richard's screw with a long side plate to span the osteotomy sites and the lesion. Post - operatively we achieved a neck shaft angle of 135° on right side and 133° on the left side. Follow up imaging showed union at both the osteotomy sites bilaterally and also at the site of the pathological fracture of neck femur. Presently, at 18 months post - operatively, patient is walking full weight bearing without support and there are no signs of recurrence of lesions of fibrous dysplasia or the deformity. Double osteotomy is an easy and effective method to correct the shepherd's crook deformity and achieve correct mechanical alignment. Dynamic hip screw with long side plate is a versatile implant to tackle the proximal femur deformity. Double osteotomy corrects the deformity and tackles the associated problems like non - union of the pathological neck femur fracture in one stage.
VK, Kandhari; SS, Bava; MM, Desai; RN, Wade
2015-01-01
Introduction: Fibrous dysplasia is a rare benign disorder of the skeletal system characterized by fibro osseous proliferation with intervening areas of normal or immature bone in the intramedullary region. It can either be a monostotic (involves one bone) or a polyostotic (involves more than one bone) presentation and usually occurs equally in males and females. Deformities like scoliosis and shepherd’s crook deformity are frequently encountered in the polyostotic form. We report a rare managed case of bilateral non-union of the pathological fracture of femur neck with shepherd’s crook deformity of the proximal femur in a case of polyostotic fibrous dysplasia. Case Report: A 16 years old female case of polyostotic fibrous dysplasia had bilateral Shepherd’s crook deformity of the proximal femur with bilateral non – union of pathological fracture of neck femur. We managed each side in one stage with two osteotomies. On the right side, first oblique osteotomy was done from just distal to the greater trochanter up to the level of the neck and the second; lateral closing wedge abduction osteotomy was done at the subtrochanteric level. 2 months later on the left side double lateral closing wedge abduction osteotomies were performed both at the subtrochanteric level. Fixation of both the sides was done using a 135° Dynamic Richard’s screw with a long side plate to span the osteotomy sites and the lesion. Post – operatively we achieved a neck shaft angle of 135° on right side and 133° on the left side. Follow up imaging showed union at both the osteotomy sites bilaterally and also at the site of the pathological fracture of neck femur. Presently, at 18 months post – operatively, patient is walking full weight bearing without support and there are no signs of recurrence of lesions of fibrous dysplasia or the deformity. Conclusion: Double osteotomy is an easy and effective method to correct the shepherd’s crook deformity and achieve correct mechanical alignment. Dynamic hip screw with long side plate is a versatile implant to tackle the proximal femur deformity. Double osteotomy corrects the deformity and tackles the associated problems like non - union of the pathological neck femur fracture in one stage. PMID:27299066
Diffo Kaze, Arnaud; Maas, Stefan; Hoffmann, Alexander; Pape, Dietrich
2017-12-01
This study aimed to investigate, by means of finite element analysis, the effect of a drill hole at the end of a horizontal osteotomy to reduce the risk of lateral cortex fracture while performing an opening wedge high tibial osteotomy (OWHTO). The question was whether drilling a hole relieves stress and increases the maximum correction angle without fracture of the lateral cortex depending on the ductility of the cortical bone. Two different types of osteotomy cuts were considered; one with a drill hole (diameter 5 mm) and the other without the hole. The drill holes were located about 20 mm distally to the tibial plateau and 6 mm medially to the lateral cortex, such that the minimal thickness of the contralateral cortical bone was 5 mm. Based on finite element calculations, two approaches were used to compare the two types of osteotomy cuts considered: (1) Assessing the static strength using local stresses following the idea of the FKM-guideline, subsequently referred to as the "FKM approach" and (2) limiting the total strain during the opening of the osteotomy wedge, subsequently referred to as "strain approach". A critical opening angle leading to crack initiation in the opposite lateral cortex was determined for each approach and was defined as comparative parameter. The relation to bone aging was investigated by considering the material parameters of cortical bones from young and old subjects. The maximum equivalent (von-Mises) stress was smaller for the cases with a drill hole at the end of the osteotomy cut. The critical angle was approximately 1.5 times higher for the specimens with a drill hole compared to those without. This corresponds to an average increase of 50%. The calculated critical angle for all approaches is below 5°. The critical angle depends on the used approach, on patient's age and assumed ductility of the cortical bone. Drilling a hole at the end of the osteotomy reduces the stresses in the lateral cortex and increases the critical opening angle prior to cracking of the opposite cortex in specimen with small correction angles. But the difference from having a drill hole or not is not so significant, especially for older patients. The ductility of the cortical bone is the decisive parameter for the critical opening angle.
2015-01-01
Maxillary transverse deficiency is one of the most common deformities among occlusal discrepancies. Typical surgical methods are segmental Le Fort I osteotomy and surgically-assisted rapid maxillary expansion (SARME). This patient underwent a parasagittal split with a Le Fort I osteotomy to correct transverse maxillary deficiency. During follow-up, early transverse relapse occurred and rapid maxillary expansion (RME) application with removal of the fixative plate on the constricted side was able to regain the dimension again. RME application may be appropriate salvage therapy for such a case. PMID:25922822
Philippe, B
2013-08-01
This paper describes a new type of miniplate system that is designed and custom made during virtual surgery planning based on an individual patient's osteotomy. These miniplates are prefabricated with commercially pure porous titanium using direct metal laser sintering. The principles that guide the conception and production of this new miniplate are presented. The surgical procedure from the stage of virtual surgery planning until the final Le Fort I osteotomy and bone fixation are described using a case example. Copyright © 2013 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.
Arnold, Heino
2008-12-01
Realignment of the great toe in the case of a hallux valgus interphalangeus by means of a medially based closing wedge osteotomy. Hallux valgus interphalangeus deformity, characterized by an enlarged distal articular surface angle (> 10 degrees). Correction of a hallux valgus interphalangeus deformity as an additional procedure in the case of hallux valgus surgery. Incongruent first metatarsophalangeal joint with lateral subluxation of the proximal phalanx. Isolated procedure to correct hallux valgus deformity. Lack of patient compliance. Neurovascular disturbance of the forefoot. Medially based closing wedge osteotomy of the proximal phalanx to reduce the distal articular surface angle. Fixation with a lag screw, cannulated Herbert screw, memory cramp, threaded Kirschner wire, or interosseous suture. Wound dressing to assure the position of the great toe. Radiographic documentation of the forefoot in two planes. Strict elevation of the operated foot to prevent postoperative swelling. Mobilization of the patient with a forefoot relief orthosis, until consolidation of the osteotomy is verified radiologically (4-5 weeks). Low-molecular-weight heparin for at least 1 week. Hallux valgus bandage or functional taping for 6 weeks postoperatively in patients with additional metatarsal osteotomy. Clinical and radiologic follow-up based on 32 patients showed good results. The postoperative Hallux Score of the American Orthopaedic Foot and Ankle Society improved to 89 points.
No midterm benefit from low intensity pulsed ultrasound after chevron osteotomy for hallux valgus.
Zacherl, Max; Gruber, Gerald; Radl, Roman; Rehak, Peter H; Windhager, Reinhard
2009-08-01
Chevron osteotomy is a widely accepted method for correction of symptomatic hallux valgus deformity. Full weight bearing in regular shoes is not recommended before 6 weeks after surgery. Low intensity pulsed ultrasound is known to stimulate bone formation leading to more stable callus and faster bony fusion. We performed a randomized, placebo-controlled, double-blinded study on 44 participants (52 feet) who underwent chevron osteotomy to evaluate the influence of daily transcutaneous low intensity pulsed ultrasound (LIPUS) treatment at the site of osteotomy. Follow-up at 6 weeks and 1 year included plain dorsoplantar radiographs, hallux-metatarsophalangeal-interphalangeal scale and a questionnaire on patient satisfaction. There was no statistical difference in any pre- or postoperative clinical features, patient satisfaction or radiographic measurements (hallux valgus angle, intermetatarsal angle, sesamoid index and metatarsal index) except for the first distal metatarsal articular angle (DMAA). The DMAA showed statistically significant (p = 0.046) relapse in the placebo group upon comparison of intraoperative radiographs after correction and fixation (5.2 degrees) and at the 6-week follow-up (10.6 degrees). Despite potential impact of LIPUS on bone formation, we found no evidence of an influence on outcome 6 weeks and 1 year after chevron osteotomy for correction of hallux valgus deformity.
Sun, Hao; Zhou, Lin; Li, Fengsheng; Duan, Jun
2017-02-01
Young active patients with medial knee osteoarthritis (OA) combined with varus leg alignment can be treated with high tibial osteotomy (HTO) to stop the progression of OA and avoid or postpone total knee arthroplasty (TKA). Closing-wedge osteotomy (CWO) and opening-wedge osteotomy (OWO) are the most commonly used osteotomy techniques. The purpose of this study was to compare the clinical and radiologic outcomes and complications between OWO and CWO. We retrospectively evaluated 23 studies including 17 clinical trials from published databases from their inception to May 2015. We evaluated the clinical outcomes including operation time, visual analog scale (VAS), maximal flexion, and hospital for special surgery knee (HSS) score. The radiologic outcomes included patellar height measured by posterior tibial slope angle, hip-knee-ankle (HKA) angle, femorotibial (FT) axis, and limb length. Complications recorded included the incidence of deep vein thrombosis (DVT), common peroneal nerve injury, opposite cortical fracture, etc. There were no differences in most of the clinical outcomes except the operation time. OWO increased the posterior slope angle and limb length, decreased the patellar height, and provided higher accuracy of correction. CWO led to a higher incidence of opposite cortical fracture. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.
Kim, Bong Chul; Padwa, Bonnie L; Park, Hyung-Sik; Jung, Young-Soo
2011-05-01
The purpose of this study was to evaluate the stability of Le Fort I osteotomy using self-reinforced biodegradable poly-70L/30DL-lactide miniplates and screws. Nineteen patients who had Le Fort I osteotomy and internal fixation using self-reinforced biodegradable poly-70L/30DL-lactide miniplates and screws were evaluated both radiographically and clinically. Changes in maxillary position after operation were documented 1 week, 1, 3, 6 mo, and/or 1-yr postoperatively with lateral cephalometric tracings. Complications of the self-reinforced biodegradable poly-70L/30DL-lactide miniplates and screws were evaluated by follow-up roentgenograms and clinical observation. A mixed model analysis for repeated measures was used for statistical analysis. Maxillary position was stable after operation with no change between time points (P > .05). There were no complications with the self-reinforced biodegradable poly-70L/30DL-lactide miniplates and screws. Internal fixation of the maxilla after Le Fort I osteotomy with self-reinforced biodegradable poly-70L/30DL-lactide miniplates and screws is a reliable method for maintaining the postoperative maxillary position after Le Fort I osteotomy. Copyright © 2011 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.
Chevron osteotomy with lateral release and adductor tenotomy for hallux valgus.
Potenza, Vito; Caterini, Roberto; Farsetti, Pasquale; Forconi, Fabrizio; Savarese, Eugenio; Nicoletti, Simone; Ippolito, Ernesto
2009-06-01
Distal chevron osteotomy is a procedure widely performed for the surgical treatment of painful hallux valgus. The risks and benefits of a lateral capsular release and adductor tenotomy combined with chevron osteotomy are still debated. The aim of our study was to report the clinical and radiographic outcomes of this combined procedure in mild and moderate incongruent bunion deformities, with a hallux valgus angle (HVA) up to 40 degrees and an intermetatarsal angle (IMA) up to 20 degrees. Forty-two patients (52 feet) who consecutively underwent chevron osteotomy combined with lateral release and adductor tenotomy were reviewed 24-36 months after surgery. The mean age of the patients was 53.5 (range, 43 to 64) years. All the deformities were mild to moderate, with a mean preoperative value of 28 degrees in the HVA (range, 16 degrees to 40 degrees) and of 13 degrees in the IMA (range, 9 degrees to 20 degrees). At followup, the AOFAS hallux score improved from an average of 46 to an average of 88. The HVA and IMA had an average postoperative decrease respectively of 12 degrees and 6 degrees; lateral sesamoid displacement decreased by a mean of 15%. In no case did we observe infection or nonunion of the osteotomy. In one case, painless avascular necrosis of the first metatarsal head developed. Our short-term results show that distal chevron osteotomy combined with lateral release and adductor tenotomy is a feasible surgical option to address mild to moderate hallux valgus deformity, even with an IM angle between 15 and 20 degrees. Clinical and radiographic outcomes are generally good and patient satisfaction is generally high.
2013-01-01
Background Proximal metatarsal osteotomy combined with a distal soft-tissue procedure is a common treatment for moderate to severe hallux valgus. Secure stabilisation of the metatarsal osteotomy is necessary to avoid complications such as delayed union, nonunion or malunion as well as loss of correction. The aim of this study was to report our results using a single screw for stabilisation of the osteotomy. Methods We retrospectively reviewed 151 patients with severe hallux valgus who were treated by the above mentioned way with full postoperative weightbearing in a stiff soled shoe. Mean age of patients at time of surgery was 54 years, 19 patients were male and 132 female. Assessment of clinical and radiographic results was performed after 2 days and 6 weeks. Results were also correlated to the experience of the performing surgeon. Results Mean preoperative HVA (hallux valgus angle) was 36.4 degrees, and then 3.5 degrees 2 days and 13.4 degrees 6 weeks after the procedure (p < 0.001). Mean preoperative IMA (intermetarsal angle) was 16.8 degrees, and then 6.4 degrees after 2 days and 9.8 degrees after 6 weeks (p < 0.001). Mean preoperative first metatarsal length of 56.4 mm decreased to 53.6 mm after 6 weeks. Possible non-union of the osteotomy was observed in 4 patients (2.6%) after 6 weeks. Performing residents (n = 40) operated in 65 minutes and attending surgeons (n = 111) in 45 minutes, with no significant differences in radiographic measurements between both groups. Conclusions Single screw stabilisation of proximal chevron osteotomy is a reliable method for treating severe hallux valgus deformities with satisfactory results. PMID:23725485
Lucas y Hernandez, J; Golanó, P; Roshan-Zamir, S; Darcel, V; Chauveaux, D; Laffenêtre, O
2016-03-01
The aim of this study was to report a single surgeon series of consecutive patients with moderate hallux valgus managed with a percutaneous extra-articular reverse-L chevron (PERC) osteotomy. A total of 38 patients underwent 45 procedures. There were 35 women and three men. The mean age of the patients was 48 years (17 to 69). An additional percutaneous Akin osteotomy was performed in 37 feet and percutaneous lateral capsular release was performed in 22 feet. Clinical and radiological assessments included the type of forefoot, range of movement, the American Orthopedic Foot and Ankle (AOFAS) score, a subjective rating and radiological parameters. The mean follow-up was 59.1 months (45.9 to 75.2). No patients were lost to follow-up. The mean AOFAS score increased from 62.5 (30 to 80) pre-operatively to 97.1 (75 to 100) post-operatively. A total of 37 patients (97%) were satisfied. At the last follow up there was a statistically significant decrease in the hallux valgus angle, the intermetatarsal angle and the proximal articular set angle. The range of movement of the first metatarsophalangeal joint improved significantly.. There was more improvement in the range of movement in patients who had fixation of the osteotomy of the proximal phalanx. Preliminary results of this percutaneous approach are promising. This technique is reliable and reproducible. Its main asset is that it maintains an excellent range of movement. The PERC osteotomy procedure is an effective approach for surgical management of moderate hallux valgus which combines the benefits of percutaneous surgery with the versatility of the chevron osteotomy whilst maintaining excellent first MTPJ range of motion. ©2016 The British Editorial Society of Bone & Joint Surgery.
Corrective osteotomy for cubitus varus in middle-aged patients.
Lim, Tae Kang; Koh, Kyoung Hwan; Lee, Do Kyung; Park, Min Jong
2011-09-01
We reviewed the results of corrective osteotomy for cubitus varus in middle-aged patients to investigate whether it is recommended in this age group. We studied 20 consecutive patients who underwent 3-dimensional corrective osteotomy at an average age of 47.9 years (range, 41-55 years). The osteotomy was fixed with single plating in 8 patients and with double plating in 12. The average follow-up was 23 months (range, 18-109 months). The average humerus-elbow-wrist angle improved from 21.4° (range, 15°-35°) varus to 8.7° (range, -4°-20°) valgus. Osseous union was radiographically demonstrated in all patients at an average of 17.5 weeks (range, 8-36 weeks). Delayed union of longer than 12 weeks was observed in 15 patients (75%). The average time to union in the single-plating group was 21.0 weeks compared with 15.1 weeks in the double-plating group (P = .012). Failure of fixation occurred in 2 patients who had single plating. The preoperative and postoperative arc of motion was similar. According to Oppenheim criteria, results were excellent in 10, good in 8, and poor in 2. The average final Mayo Elbow Performance Score was 90.3 points (range, 70-100 points). Cubitus varus in middle-aged patients can be treated by a closing wedge osteotomy and fixation with double plating. This provides satisfactory deformity correction, maintenance of the elbow motion, and good functional outcome, although healing of the osteotomy tends to be delayed. Copyright © 2011 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Mosby, Inc. All rights reserved.
Postoperative dysesthesia in lumbar three-column resection osteotomies.
Zhang, Zhengfeng; Wang, Honggang; Zheng, Wenjie
2016-08-01
Three-column lumbar spinal resection osteotomies including pedicle subtraction osteotomy (PSO), vertebral column resection (VCR), and total en bloc spondylectomy (TES) can potentially lead to dorsal root ganglion (DRG) injury which may cause postoperative dysesthesia (POD). The purpose of retrospective study was to describe the uncommon complication of POD in lumbar spinal resection osteotomies. Between January 2009 and December 2013, 64 patients were treated with lumbar three-column spinal resection osteotomies (PSO, n = 31; VCR, n = 29; TES, n = 4) in investigator group. POD was defined as dysesthetic pain or burning dysesthesia at a proper DRG innervated region, whether spontaneous or evoked. Non-steroidal antiinflammatory drugs, central none-opioid analgesic agent, neuropathic pain drugs and/or intervertebral foramen block were selectively used to treat POD. There were 5 cases of POD (5/64, 7.8 %), which consisted of 1 patient in PSO (1/31, 3.2 %), 3 patients in PVCR (3/29, 10.3 %), and 1 patient in TES (1/4, 25 %). After the treatment by drugs administration plus DRG block, all patients presented pain relief with duration from 8 to 38 days. A gradual pain moving to distal end of a proper DRG innervated region was found as the beginning of end. Although POD is a unique and rare complication and maybe misdiagnosed as nerve root injury in lumbar spinal resection osteotomies, combination drug therapy and DRG block have an effective result of pain relief. The appearance of a gradual pain moving to distal end of a proper DRG innervated region during recovering may be used as a sign for the good prognosis.
Han, Jae Hwi; Yang, Jae-Hyuk; Bhandare, Nikhl N; Suh, Dong Won; Lee, Jong Seong; Chang, Yong Suk; Yeom, Ji Woong; Nha, Kyung Wook
2016-08-01
Medial opening wedge high tibial osteotomy (HTO) has become increasingly popular as an alternative to lateral closing wedge osteotomy for the treatment of medial compartment knee osteoarthritis with varus deformity. The present systematic review was conducted to provide an objective analysis of total knee arthroplasty (TKA) outcomes following previous knee osteotomy (medial opening wedge vs. lateral closing wedge). A literature search of online databases (MEDLINE, EMBASE, Cochrane Library database) was made, in addition to manual search of major orthopaedic journals. The methodological quality of each of the studies was assessed on the Newcastle-Ottawa Scale and Effective Practice and Organization of Care. A total of ten studies were included in the review. There were eight studies with Level IV and two studies with Level III evidence. Eight studies reported clinical and radiologic scores. Comparative studies between TKA following medial opening and lateral closing wedge HTO did not demonstrate statistically significant clinical and radiologic differences. The revision rates were similar. However, more technical issues during TKA surgery after lateral closing wedge HTO were mentioned than the medial open wedge group. The quadriceps snip, tibial tubercle osteotomy, and lateral soft tissue release were more frequently needed in the lateral closing wedge HTO group. In addition, because of loss of proximal tibia bone geometry in the lateral closing wedge HTO group, concerns such as tibia stem impingement in the lateral tibial cortex was noted. The present systematic review suggests that TKA after medial opening and lateral closing wedge HTO showed similar performance. Clinical and radiologic outcome including revision rates did not statistically differ from included studies. However, there are more surgical technical concerns in TKA conversion from lateral closing wedge HTO than from the medial opening wedge HTO group. IV.
[Modified osteotomy of olecranon for the management of inter-condylar fracture of the humerus].
Mei, Zheng-Feng; Lei, Wen-Tao; Huang, Dong-Hui; Zhao, Qi-Hui; Qu, Hang-Bo; Ni, Lian-Zhi
2017-01-25
To explore the surgical method and clinical outcome of modified osteotomy of olecranon for the treatment of inter-condylar fracture of humerus. From May 2007 to December 2012, 32 patients of intercondylar fracture of humerus were treated surgically through the approach of modified osteotomy of olecranon. The patients were 21 males and 11 females with a mean age of 46.3 years (ranged 18 to 65 years). Nineteen fractures occurred on the right extremity and 13 on the left extremity. According to the AO classification, type C1 fracture was found in 7, C2 in 11 and C3 in 14. Five patients suffered from open fracture (Gustilo type Iin 3, type II in 2). Other fractures occurred in 6 patients and the primary injury of nerve occurred 6. The healing of the osteotomy was evaluated with physical examination and plain X-ray film, and the function of elbow was assessed according to Cassebaum scale. All the patients were followed from 9 months to 5 years(average, 1.9 years). All the osteotomies healed at 7.4 weeks averagely after operation, and no nonunion, delayed union, fracture of ulna olecranon were found. Two cases had little pain on the elbow, heterotopic ossification occurred in 2 cases and cutting bone block loosed in 1 case. The function of the elbow showed excellent in 19 cases, good in 8, fair in 4 and poor in 1. The use of the approach of modified olecranon osteotomy for surgical management of intercondylar fracture of humerus has some advantages, it provides satisfactory stability with simple technical procedures avoiding inter-articular invasion, and it facilitates rehabilitation exercises and providing good results with low complication rates.
Bao, Hongda; He, Shouyu; Liu, Zhen; Zhu, Zezhang; Qiu, Yong; Zhu, Feng
2015-03-01
A retrospective radiographical study. To compare compensatory behavior of coronal and sagittal alignment after pedicle subtraction osteotomy (PSO) and Smith-Petersen osteotomy (SPO) for degenerative kyphoscoliosis. There was a paucity of literature paying attention to the postoperative imbalance after PSO or SPO and natural evolution of the imbalance. A retrospective study was performed on 68 consecutive patients with degenerative kyphoscoliosis treated by lumbar PSO (25 patients) or SPO (43 patients) procedures at a single institution. Long-cassette standing radiographs were taken preoperatively, postoperatively, and at the last follow-up and radiographical parameters were measured. The lower instrumented vertebral level and level of osteotomy were compared between the patients with and without improvement. Negative sagittal vertical axis (SVA) was observed in the PSO group postoperatively, implying an overcorrection of SVA. This negative SVA improved spontaneously during follow-up (P < 0.05). Coronal balance was found to worsen immediately postoperatively in the SPO group (P < 0.05). At the last follow-up, spontaneous improvement was observed in 15 patients and the average coronal balance decreased to 16.35 mm. For the 15 patients with improved coronal balance, fusion at L5 or above was more common compared with the 11 patients with persisted postoperative imbalance (P = 0.027), whereas no difference in term of levels of osteotomy was found (P > 0.05). The overcorrection of SVA is more often seen in the PSO group. The coronal imbalance is more likely to occur in the SPO group. The postoperative sagittal imbalance often spontaneously improves with time. Lower instrumented vertebra at S1 or with pelvic fixation should be regarded as potential risk factors for persistent coronal imbalance in patients with SPO. 3.
Outcomes of a Stepcut Lengthening Calcaneal Osteotomy for Adult-Acquired Flatfoot Deformity.
Demetracopoulos, Constantine A; Nair, Pallavi; Malzberg, Andrew; Deland, Jonathan T
2015-07-01
Lateral column lengthening is used to correct abduction deformity at the midfoot and improve talar head coverage in patients with flatfoot deformity. It was our hypothesis that following a stepcut lengthening calcaneal osteotomy (SLCO), patients would have adequate correction of the deformity, a high union rate of the osteotomy, and improvement in clinical outcome scores. We retrospectively reviewed 37 consecutive patients who underwent SLCO for the treatment of stage IIB flatfoot deformity with a minimum 2-year follow-up. Deformity correction was assessed using preoperative and postoperative weight-bearing radiographs. Healing of the osteotomy was assessed by computed tomography. Clinical outcomes included the FAOS and SF-36 questionnaires. The Wilcoxon signed-rank test was used to compare clinical outcome scores. An alpha level of .05 was deemed statistically significant. Healing of the osteotomy occurred at a mean of 7.7 weeks postoperatively. The talonavicular (TN) coverage angle improved from 34.0 to 8.8 (P < .001), the percentage of TN uncoverage improved from 40.9% to 17.7% (P < .001), and the TN incongruency angle improved from 68.1 to 8.7 (P < .001). In addition, there was an improvement in FAOS pain (P < .001), daily activities (P < .001), sport activities (P = .006), and quality of life scores (P < .001). Overall SF-36 scores also showed improvement postoperatively (P < .001). There was no incidence of delayed union, nonunion, or graft collapse. Following SLCO, patients demonstrated excellent healing, good correction of the deformity, and improvement in clinical outcomes scores. The SLCO is an alternative to the Evans osteotomy for lateral column lengthening. Level IV, retrospective case review. © The Author(s) 2015.
Farooq, Ghulam; Rehman, Lal; Bokhari, Irum; Rizvi, Syed Raza Hussain
2018-01-01
The olfactory groove meningioma has always been surgically challenging. The common microscopic surgical procedures exercised involve modification of pterional or sub-frontal approaches with or without orbital osteotomies. However, we believe that orbital osteotomies are not mandatory to achieve gross total resection. Hence, this study was performed to evaluate the surgical outcomes of olfactory groove meningioma with bicoronal sub frontal approach but without orbital osteotomies. The study was performed by reviewing the medical charts, neuroimaging data, and follow-up data of 19 patients who were treated micro surgically for olfactory groove meningioma without orbital osteotomies in our department. Mean overall follow up period of our study was 5 years. Statistical analysis was done by means of IBM SPSS Software version 19. Nineteen patients (1 male and 18 female patients, with an age range of 35-67 years; average age of patients' 51±7.5 years) of OGM were managed in our department. All patients were evaluated by MRI Brain with and without Gadolinium, CTA, CT Scan both axial and Coronal sequences. Most common symptom reported was head ache (80%), others include; urinary incontinence (26%), seizures (78%), decreased visual acuity (79%), papilledema (74%), personality changes (68%) and olfactory loss was reported in 57% of the patients. Post-operative complications include; CSF accumulation (5%), hematoma at tumor bed (10%), skin infection (5%) and mild post-operative brain edema (26%). Mortality rate was 5%. During 5 years of follow-up, we recorded one recurrence which was after 26 months and successfully removed in reoperation. Bi-coronal sub frontal approach appears to be an excellent technique for Olfactory Meningioma removal as practiced by most neurosurgeons. Nevertheless, it is not mandatory to carry out orbital osteotomy to acquire optimal surgical outcome as is advocated by some Authors.
Proximal Opening Wedge Osteotomy Provides Satisfactory Midterm Results With a Low Complication Rate.
Oravakangas, Rami; Leppilahti, Juhana; Laine, Vesa; Niinimäki, Tuukka
2016-01-01
Hallux valgus is one of the most common foot deformities. Proximal opening wedge osteotomy is used for the treatment of moderate and severe hallux valgus with metatarsus primus varus. However, hypermobility of the first tarsometatarsal joint can compromise the results of the operation, and a paucity of midterm results are available regarding proximal open wedge osteotomy surgery. The aim of the present study was to assess the midterm results of proximal open wedge osteotomy in a consecutive series of patients with severe hallux valgus. Thirty-one consecutive adult patients (35 feet) with severe hallux valgus underwent proximal open wedge osteotomy. Twenty patients (35.5%) and 23 feet (34.3%) were available for the final follow-up examination. The mean follow-up duration was 5.8 (range 4.6 to 7.0) years. The radiologic measurements and American Orthopaedic Foot and Ankle Society hallux-metatarsophalangeal-interphalangeal scores were recorded pre- and postoperatively, and subjective questionnaires were completed and foot scan analyses performed at the end of the follow-up period. The mean hallux valgus angle decreased from 38° to 23°, and the mean intermetatarsal angle correction decreased from 17° to 10°. The mean improvement in the American Orthopaedic Foot and Ankle Society hallux metatarsophalangeal-interphalangeal score increased from 52 to 84. Two feet (5.7%) required repeat surgery because of recurrent hallux valgus. No nonunions were identified. Proximal open wedge osteotomy provided satisfactory midterm results in the treatment of severe hallux valgus, with a low complication rate. The potential instability of the first tarsometatarsal joint does not seem to jeopardize the midterm results of the operation. Copyright © 2016 American College of Foot and Ankle Surgeons. Published by Elsevier Inc. All rights reserved.
Effect of Alveolar Segmental Sandwich Osteotomy on Alveolar Height: A Preliminary Study.
Mehta, Karan S; Prasad, Kavitha; Shetty, Vibha; Ranganath, Krishnappa; Lalitha, R M; Dexith, Jayashree; Munoyath, Sejal K; Kumar, Vineeth
2017-12-01
Bone loss following extraction is maximum in horizontal dimension. Height is also reduced which is pronounced on the buccal aspect. Various surgical procedures are available to correct the bone volume viz. GBR, onlay bone grafting, alveolar distraction and sandwich osteotomy. Sandwich osteotomy has been found to increase the vertical alveolar bone height successfully. The objective of the study was to assess the effect of alveolar segmental sandwich osteotomy on alveolar height and crestal width. A prospective study was undertaken from December 2012 to August 2014. Seven patients with 12 implant sites with a mean age of 36 years were recruited. All seven patients with 12 implant sites underwent alveolar segmental sandwich osteotomy and interpositional bone grafting. Alveolar bone height was assessed radiographically preoperatively, immediate post-op, and at 3 months post-op. Alveolar bone width was assessed radiographically preoperatively and at 3 months post-op. Statistical significance was inferred at p < 0.05. The mean vertical augmentation at immediate post-op was 6.58 mm ( p = 0.001). The vertical augmentation that was achieved 3 months post-op was a mean of 3.75 mm which was statistically significant ( p = 0.004). The change in alveolar height from immediate post-op to 3 month post-op was a mean 1.69 mm. The mean change in alveolar crestal width at 3 months was a mean of -0.29 mm ( p = 0.57). Sandwich osteotomy can be used as an alternative technique to increase alveolar bone height prior to implant placement. Moderate alveolar deficiency can be predictably corrected by this technique.
Gabrić, Dragana; Blašković, Marko; Gjorgijevska, Elizabeta; Mladenov, Mitko; Tašič, Blaž; Jurič, Ivona Bago; Ban, Ticijana
2016-01-01
To analyze the healing of bone tissue treated with Er:YAG laser contact and noncontact modes of and piezosurgery in a rat model using triangular laser profilometry. Twenty-four 10-week-old adult male Wistar rats were used in the study. Three osteotomies on the medial part of tibia were performed in each animal, 1 in the right tibia and 2 in the left tibia. The osteotomies were performed with a piezoelectric device set at maximal power and the Er:YAG laser in contact mode (power, 7.5 W; pulse energy, 375 mJ; repetition rate, 20 Hz; MSP mode) and noncontact mode (power, 7.5 W; pulse energy, 750 mJ; repetition rate, 10 Hz; QSP mode) with a novel type of circular, digitally controlled handpiece (x-Runner). After surgery, 6 animals were immediately euthanized (group 1), and the others were euthanized after 1 week (group 2, n = 6), 2 weeks (group 3, n = 6), and 3 weeks (group 4, n = 6). Bone healing after osteotomy was analyzed using a 3-dimensional laser scanning technique (ie, laser triangulation profilometry). The volume reduction rates are similar for all 3 techniques (0.2 to 0.25 mm(3) per week). Greater volume reduction of 0.25 mm3 per week was observed for the Er:YAG laser in noncontact mode (x-Runner). After 3 weeks, almost complete healing of the prepared osteotomy was observed. Within the limitations of this study, the osteotomies performed by the Er:YAG laser in digitally controlled noncontact mode healed the fastest. Copyright © 2016 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.
Barnes, K; Lanz, O; Werre, S; Clapp, K; Gilley, R
2015-01-01
To compare optical values in the osteotomy gap created after a tibial tuberosity advancement (TTA) treated with autogenous cancellous bone graft, extracorporeal shock wave therapy, a combination of autogenous cancellous bone graft and extracorporeal shock wave therapy, and absence of both autogenous cancellous bone graft and extracorporeal shock wave therapy using densitometry. Dogs that were presented for surgical repair of a cranial cruciate ligament rupture were randomly assigned to one of four groups: TTA with autogenous cancellous bone graft (TTA-G), TTA with autogenous cancellous bone graft and extracorporeal shock wave therapy (TTA-GS), TTA with extracorporeal shock wave therapy (TTA-S), and TTA with no additional therapy (TTA-O). Mediolateral radiographs at zero, four and eight weeks after surgery were evaluated to compare healing of the osteotomy gap via densitometry. An analysis of variance was used to compare the densitometric values between groups. At four weeks after surgery, a significant difference in osteotomy gap density was noted between TTA-GS (8.4 millimetres of aluminium equivalent [mmAleq]) and TTA-S (6.1 mmAleq), and between TTA-GS (8.4 mmAleq) and TTA-O (6.4 mmAleq). There were no significant differences noted between any groups at the eight week re-evaluation. There were no significant differences in the osteotomy gap density at eight weeks after surgery regardless of the treatment modality used. The combination of autogenous cancellous bone graft and extracorporeal shock wave therapy may lead to increased radiographic density of the osteotomy gap in the first four weeks after surgery. Densitometry using an aluminium step wedge is a feasible method for comparison of bone density after TTA in dogs.
Mishra, Sunil Kumar; Chowdhary, Ramesh
2014-06-01
Osseointegration is the more stable situation and results in a high success rate of dental implants. Heat generation during rotary cutting is one of the important factors influencing the development of osseointegration. To assess the various factors related to implant drills responsible for heat generation during osteotomy. To identify suitable literature, an electronic search was performed using Medline and Pubmed database. Articles published in between 1960 to February 2013 were searched. The search is focused on heat generated by dental implant drills during osteotomy. Various factors related to implant drill such effect of number of blades; drill design, drill fatigue, drill speed and force applied during osteotomies which were responsible for heat generation were reviewed. Titles and abstracts were screened, and literature that fulfilled the inclusion criteria was selected for a full-text reading. The initial literature search resulted in 299 articles out of which only 70 articles fulfils the inclusion criteria and were included in this systematic review. Many factors related to implant drill responsible for heat generation were found. Successful preparation of an implant cavity with minimal damage to the surrounding bone depends on the avoidance of excessive temperature generation during surgical drilling. The relationship between heat generated and implant drilling osteotomy is multifactorial in nature and its complexity has not been fully studied. Lack of scientific knowledge regarding this issue still exists. Further studies should be conducted to determine the various factors which generate less heat while osteotomy such as ideal ratio of force and speed in vivo, exact time to replace a drill, ideal drill design, irrigation system, drill-bone contact area.
Yoshihara, Hiroyuki; Abumi, Kuniyoshi; Ito, Manabu; Kotani, Yoshihisa; Sudo, Hideki; Takahata, Masahiko
2013-11-01
Surgical treatment for severe circumferentially fixed cervical kyphosis has been challenging. Both anterior and posterior releases are necessary to provide the cervical mobility necessary for fusion in a corrected position. In two case reports, we describe the circumferential osteotomy of anterior-posterior-anterior surgical sequence, and the efficacy of this technique when cervical pedicle screw fixation for severe fixed cervical kyphosis is used. Etiology of fixed cervical kyphosis was unknown in one patient and neurofibromatosis in one patient. Both patients had severe fixed cervical kyphosis as determined by cervical radiographs and underwent circumferential osteotomy and fixation via an anterior-posterior-anterior surgical sequence and correction of kyphosis by pedicle screw fixation. Severe fixed cervical kyphosis was treated successfully by the use of circumferential osteotomy and pedicle screw fixation. The surgical sequence described in this report is a reasonable approach for severe circumferentially fixed cervical kyphosis and short segment fixation can be achieved using pedicle screws. Copyright © 2013 Elsevier Inc. All rights reserved.
Wagener, Marc L; Driesprong, Marco; Heesterbeek, Petra J C; Verdonschot, Nico; Eygendaal, Denise
2013-08-01
In this study three different methods for fixating the Chevron osteotomy of the olecranon are evaluated. Transcortical fixed Kirschner wires with a tension band, a large cancellous screw with a tension band, and a large cancellous screw alone are compared using Roentgen Stereophotogrammatic Analysis (RSA). The different fixation methods were tested in 17 cadaver specimens by applying increasing repetitive force to the triceps tendon. Forces applied were 200N, 350N, and 500N. Translation and rotation of the osteotomy were recorded using Roentgen Stereophotogrammatic Analysis. Both the fixations with a cancellous screw with tension band and with bi-cortical placed Kirschner wires with a tension band provide enough stability to withstand the forces of normal daily use. Since fixation with a cancellous screw with tension band is a fast and easy method and is related to minimal soft tissue damage this method can preferably be used for fixation of a Chevron osteotomy of the olecranon. © 2013.
Skull base tumors: a kaleidoscope of challenge.
Khanna, J N; Natrajan, Srivalli; Galinde, Jyotsna
2014-08-01
Resection of skull base lesions has always been riddled with problems like inadequate access, proximity to major vessels, dural tears, cranial nerve damage, and infection. Understanding the modular concept of the facial skeleton has led to the development of transfacial swing osteotomies that facilitates resection in a difficult area with minimal morbidity and excellent cosmetic results. In spite of the current trend toward endonasal endoscopic management of skull base tumors, our series presents nine cases of diverse extensive skull base lesions, 33% of which were recurrent. These cases were approached through different transfacial swing osteotomies through the mandible, a midfacial swing, or a zygomaticotemporal osteotomy as dictated by the three-dimensional spatial location of the lesion, and its extent and proximity to vital structures. Access osteotomies ensured complete removal and good results through the most direct and safe route and good vascular control. This reiterated the fact that transfacial approaches still hold a special place in the management of extensive skull base lesions.
Skull Base Tumors: A Kaleidoscope of Challenge
Khanna, J.N.; Natrajan, Srivalli; Galinde, Jyotsna
2014-01-01
Resection of skull base lesions has always been riddled with problems like inadequate access, proximity to major vessels, dural tears, cranial nerve damage, and infection. Understanding the modular concept of the facial skeleton has led to the development of transfacial swing osteotomies that facilitates resection in a difficult area with minimal morbidity and excellent cosmetic results. In spite of the current trend toward endonasal endoscopic management of skull base tumors, our series presents nine cases of diverse extensive skull base lesions, 33% of which were recurrent. These cases were approached through different transfacial swing osteotomies through the mandible, a midfacial swing, or a zygomaticotemporal osteotomy as dictated by the three-dimensional spatial location of the lesion, and its extent and proximity to vital structures. Access osteotomies ensured complete removal and good results through the most direct and safe route and good vascular control. This reiterated the fact that transfacial approaches still hold a special place in the management of extensive skull base lesions. PMID:25083368
Sim, Jae Ang; Lee, Yong Seuk; Kwak, Ji Hoon; Yang, Sang Hoon; Kim, Kwang Hui; Lee, Beom Koo
2013-12-01
During ligament balancing for severe medial contracture in varus knee total knee arthroplasty (TKA), complete distal release of the medial collateral ligament (MCL) or a medial epicondylar osteotomy can be necessary if a large amount of correction is needed. This study retrospectively reviewed 9 cases of complete distal release of the MCL and 11 cases of medial epicondylar osteotomy which were used to correct severe medial contracture. The mean follow-up periods were 46.5 months (range, 36 to 78 months) and 39.8 months (range, 32 to 65 months), respectively. There were no significant differences in the clinical results between the two groups. However, the valgus stress radiograph revealed significant differences in medial instability. In complete distal release of the MCL, some stability was obtained by repair and bracing but the medial instability could not be removed completely. Medial epicondylar osteotomy for a varus deformity in TKA could provide constant medial stability and be a useful ligament balancing technique.
Management of Cubitus Varus Deformity in Children by Closed Dome Osteotomy
Kejariwal, Ujjwal; Singh, Bijendra
2017-01-01
Introduction Supracondylar fractures are the most common elbow injuries in skeletally immature children between 5-10 years of age and cubitus varus deformity is the most common late complication. Cubitus varus or bow elbow or gunstock deformity is the result of malunion occurring as a complication of supracondylar fracture of the humerus. Various type of corrective osteotomies are used of which lateral closed wedge French osteotomy is commomly used which has its own complications like lateral condylar prominence, unsightful scar and limitation of movement. Closed dome osteotomy is a technique which overcomes these complications. This surgery is done with simple readily available instruments in the orthopaedic operation theatre with no special requirements for instrumentation. Aim This study was done to study the results of closed dome osteotomy for correction of cubitus varus deformity, after malunited supracondylar fracture of humerus in children. Materials and Methods This study included 25 children of either sex with malunited supracondylar fracture of distal humerus having cubitus varus deformity admitted in orthopaedics department. After appropriate pre operative assessment, closed dome osteotomy was done and post operatively X-ray of patients was taken and carrying angle and Lateral Condylar Prominence Index (LCPI) were calculated. Patients were re-assessed at complete union and results were calculated as per Mitchell and Adams criteria. Results In our study of 25 patients, 68% were males, 32% were females. Majority (84%) of patients were in the age group of 5-10 years. Carrying angle post operatively was 0-10° valgus in 64% of patients while 36% had 10-20° valgus. LCPI changed post operatively ranging from +5.0% to -10.7%, average -2.75%. Decrease in LCPI had better cosmetic appearance. Range of motion post operatively increased or remained same as previous full motion in 84% of the patients. Union occurred in all patients by eight weeks. Few complications were seen. Results according to Mitchell and Adams criteria were excellent in 88% and good in 12%; while no poor results were recorded. Conclusion The results obtained in our study concluded that closed dome osteotomy is safe and effective treatment for the correction of cubitus varus deformity with few minor complications. PMID:28511466
Cheema, Tahseen; Salas, Christina; Morrell, Nathan; Lansing, Letitia; Reda Taha, Mahmoud M; Mercer, Deana
2012-04-01
Radial subluxation and cartilage thinning have been associated with initiation and accelerated development of osteoarthritis of the trapeziometacarpal joint. Few investigators have reported on the benefits of opening wedge trapezial osteotomy for altering the contact mechanics of the trapeziometacarpal joint as a possible deterrent to the initiation or progression of osteoarthritis. We used cadaveric specimens to determine whether opening wedge osteotomy of the trapezium was successful in reducing radial subluxation of the metacarpal base and to quantify the contact area and pressure on the trapezial surface during simulated lateral pinch. We used 8 fresh-frozen specimens in this study. The flexor pollicis longus, abductor pollicis longus, adductor pollicis, abductor pollicis brevis, and flexor pollicis brevis/opponens pollicis tendons were each loaded to simulate the thumb in lateral pinch position. We measured radial subluxation from anteroposterior radiographs before and after placement of a 15° wedge. We used real-time sensors to analyze contact pressure and contact area distribution on the trapezium. Center of force in the normal joint under lateral pinch loading was primarily located in the dorsal region of the trapezium. After wedge placement, contact pressure increased in the ulnar-dorsal region by 76%. Mean contact area increased in the ulnar-dorsal region from 0.05 to 0.07 cm(2), and in the ulnar-volar region from 0.003 to 0.024 cm(2). The average reduction in joint subluxation was 64%. The 15° opening wedge osteotomy of the trapezium reduced radial subluxation of the metacarpal on the trapezium and increased contact pressure and contact area away from the diseased compartments of the trapezial surface. Trapezial osteotomy addresses the 2 preeminent theories about the initiation and progression of osteoarthritis. By reducing radial subluxation and altering contact pressure and contact area, trapezial osteotomy may prove an alternative to first metacarpal extension osteotomy or ligament reconstruction in early stages of degenerative arthritis of the trapeziometacarpal joint. Copyright © 2012 American Society for Surgery of the Hand. Published by Elsevier Inc. All rights reserved.
Cotter, Eric J; Waterman, Brian R; Kelly, Mick P; Wang, Kevin C; Frank, Rachel M; Cole, Brian J
2017-08-01
Symptomatic patellofemoral chondral lesions are a challenging clinical entity, as these defects may result from persistent lateral patellar maltracking or repetitive microtrauma. Anteromedializing tibial tubercle osteotomy has been shown to be an effective strategy for primary and adjunctive treatment of focal or diffuse patellofemoral disease to improve the biomechanical loading environment. Similarly, osteochondral allograft transplantation has proven efficacy in physiologically young, high-demand patients with condylar or patellofemoral lesions, particularly without early arthritic progression. The authors present the surgical management of a young athlete with symptomatic tricompartmental focal chondral defects with fresh osteochondral allograft transplantation and anteromedializing tibial tubercle osteotomy.
[The biomechanics of screws, cerclage wire and cerclage cable].
Schröder, C; Woiczinski, M; Utzschneider, S; Kraxenberger, M; Weber, P; Jansson, V
2013-05-01
In contrast to fracture fixation, when performing an osteotomy the surgeon is able to plan preoperatively. The resulting fixation and compression of the bone fragments are the most important points. A stable osteosynthesis should prevent dislocation of bone fragments and improve bone healing. Beside plates, cerclages can be used for tension band or diaphysis bone fixation. Moreover, cortical or cancellous screws can be used for osteotomy fixation. This work describes biomechanical principles for fixation after an osteotomy with cerclages and cortical or cancellous screws. It also summarizes the materials and geometries used, as well as their influence on the stability of the osteosynthesis.
Brachymetatarsia of the Fourth Metatarsal, Lengthening Scarf Osteotomy with Bone Graft
Desai, Ankit; Lidder, Surjit; R. Armitage, Andrew; S. Rajaratnam, Samuel; D. Skyrme, Andrew
2013-01-01
A 16-year-old girl presented with left fourth metatarsal shortening causing significant psychological distress. She underwent lengthening scarf osteotomy held with an Omnitech® screw (Biotech International, France) with the addition of two 1 cm cancellous cubes (RTI Biologics, United States). A lengthening zplasty of the extensor tendons and skin were also performed. At 6 weeks the patient was fully weight bearing and at one-year follow up, the patient was satisfied and discharged. A modified technique of lengthening scarf osteotomy is described for congenital brachymatatarsia. This technique allows one stage lengthening through a single incision with graft incorporation by 6 weeks. PMID:24191181
Brachymetatarsia of the fourth metatarsal, lengthening scarf osteotomy with bone graft.
Desai, Ankit; Lidder, Surjit; R Armitage, Andrew; S Rajaratnam, Samuel; D Skyrme, Andrew
2013-01-01
A 16-year-old girl presented with left fourth metatarsal shortening causing significant psychological distress. She underwent lengthening scarf osteotomy held with an Omnitech(®) screw (Biotech International, France) with the addition of two 1 cm cancellous cubes (RTI Biologics, United States). A lengthening zplasty of the extensor tendons and skin were also performed. At 6 weeks the patient was fully weight bearing and at one-year follow up, the patient was satisfied and discharged. A modified technique of lengthening scarf osteotomy is described for congenital brachymatatarsia. This technique allows one stage lengthening through a single incision with graft incorporation by 6 weeks.
Piezoelectric osteotomy for intraoral harvesting of bone blocks.
Sohn, Dong-Seok; Ahn, Mi-Ra; Lee, Won-Hyuk; Yeo, Duk-Sung; Lim, So-Young
2007-04-01
Grafting with intraoral bone blocks is a good way to reconstruct severe horizontal and vertical bone resorption in future implant sites. The Piezosurgery System (Mectron) creates an effective osteotomy with minimal or no trauma to soft tissue, in contrast to conventional surgical burs or saws. In addition, piezoelectric surgery produces less vibration and noise because it uses microvibration, in contrast to the macrovibration and extreme noise that occur with a surgical saw or bur. Microvibration and reduced noise minimize a patient's psychologic stress and fear during osteotomy under local anesthesia. The purpose of this article is to describe the harvesting of intraoral bone blocks using the piezoelectric surgery device.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Jacobs, A.M.; Klein, S.; Oloff, L.
This paper discusses radionuclide imaging as it applies to bone and implant foot surgery. Where necessary, studies and information from published literature have been extrapolated in an attempt to apply them in differentiating between normal and abnormal healing osteotomies and implant prosthetics.
Ravinsky, Robert A.; Ouellet, Jean-Albert; Brodt, Erika D.; Dettori, Joseph R.
2013-01-01
Study Design Systematic review. Study Rationale To seek out and assess the best quality evidence available comparing opening wedge osteotomy (OWO) and closing wedge osteotomy (CWO) in patients with ankylosing spondylitis to determine whether their results differ with regard to several different subjective and objective outcome measures. Objective The aim of this study is to determine whether there is a difference in subjective and objective outcomes when comparing CWO and OWO in patients with ankylosing spondylitis suffering from clinically significant thoracolumbar kyphosis with respect to quality-of-life assessments, complication risks, and the amount of correction of the spine achieved at follow-up. Methods A systematic review was undertaken of articles published up to July 2012. Electronic databases and reference lists of key articles were searched to identify studies comparing effectiveness and safety outcomes between adult patients with ankylosing spondylitis who received closing wedge versus opening wedge osteotomies. Studies that included pediatric patients, polysegmental osteotomies, or revision procedures were excluded. Two independent reviewers assessed the strength of evidence using the GRADE criteria and disagreements were resolved by consensus. Results From a total of 67 possible citations, 4 retrospective cohorts (class of evidence III) met our inclusion criteria and form the basis for this report. No differences in Oswestry Disability Index, visual analog scale for pain, Scoliosis Research Society (SRS)-24 score, SRS-22 score, and patient satisfaction were reported between the closing and opening wedge groups across two studies. Regarding radiological outcomes following closing versus opening osteotomies, mean change in sagittal vertical axis ranged from 8.9 to 10.8 cm and 8.0 to 10.9 cm, respectively, across three studies; mean change in lumbar lordosis ranged from 36 to 47 degrees and 19 to 41 degrees across four studies; and mean change in global kyphosis ranged from 38 to 40 degrees and 28 to 35 degrees across two studies. Across all studies, overall complication risks ranged from 0 to 16.7% following CWO and from 0 to 23.6% following OWO. Conclusion No statistically significant differences were seen in patient-reported or radiographic outcomes between CWO and OWO in any study. The risks of dural tear, neurological injury, and reoperation were similar between groups. Blood loss was greater in the closing wedge compared with the opening wedge group, while the risk of paralytic ileus was less. The overall strength of evidence for the conclusions is low. PMID:24436696
Noh, Min-Ki; Lee, Baek-Soo; Kim, Shin-Yeop; Jeon, Hyeran Helen; Kim, Seong-Hun; Nelson, Gerald
2017-11-01
This article presents an alternate surgical treatment method to correct a severe anterior protrusion in an adult patient with an extremely thin alveolus. To accomplish an effective and efficient anterior segmental retraction without periodontal complications, the authors performed, under local anesthesia, a wide linear corticotomy and corticision in the maxilla and an anterior segmental osteotomy in mandible. In the maxilla, a wide linear corticotomy was performed under local anesthesia. In the maxillary first premolar area, a wide section of cortical bone was removed. Retraction forces were applied buccolingually with the aid of temporary skeletal anchorage devices. Corticision was later performed to close residual extraction space. In the mandible, an anterior segmental osteotomy was performed and the first premolars were extracted under local anesthesia. In the maxilla, a wide linear corticotomy facilitated a bony block movement with temporary skeletal anchorage devices, without complications. The remaining extraction space after the bony block movement was closed effectively, accelerated by corticision. In the mandible, anterior segmental retraction was facilitated by an anterior segmental osteotomy performed under local anesthesia. Corticision was later employed to accelerate individual tooth movements. A wide linear corticotomy and an anterior segmental osteotomy combined with corticision can be an effective and efficient alternative to conventional orthodontic treatment in the bialveolar protrusion patient with an extremely thin alveolar housing.
Internal lateral nasal osteotomy: double-guarded osteotome and mucosa tearing.
Mottura, A Aldo
2011-04-01
For the internal lateral nasal osteotomy, a 4-mm double-guarded straight osteotome that separates the external periost and mucoperiosteum while the osteotomy is progressing is presented. Before the osteotomy, the external periost and the internal mucoperiosteum are infiltrated with local anesthesia and elevated by tunneling with an elevator. As the sharp part is behind the guards, it is not possible for the osteotome to slip away laterally or medially from the nasal bone. By tunneling just at the base of the nasal bones, arteries, veins, and lymphatics are preserved while the superior part of the external periosteum and the internal mucoperichondrium maintained the bones in a stable position with firm support to both sides. Forty consecutive rhinoplasties were studied with an endoscope. In 35 primary rhinoplasties the mucosa laceration rate was 1.5%, whereas in secondary rhinoplasties it was 80%. The approach to the piriform aperture was intranasal in the first 16 cases and intraoral in the last 24 cases. The intraoral mucosal elevation and osteotomy were easier to carry out than in the intranasal approach. In general, minor lower-lid edema and ecchymosis were observed, possibly related to the fact that the periosteum was elevated, thus preserving the supraperiosteal arteries, veins, and lymphatics. When the mucosa was elevated, the internal irrigation of the mucosa and the lymphatics was also preserved, thus avoiding intraoperative bleeding, intranasal packing, and postoperative bleeding.
Bai, Long Bin; Lee, Keun Bae; Seo, Chang Young; Song, Eun Kyoo; Yoon, Taek Rim
2010-08-01
Distal chevron osteotomy has been widely employed to treat mild to moderate hallux valgus deformity. The purpose of the present study was to evaluate the outcomes of distal chevron osteotomy with a distal soft tissue procedure for the correction of moderate to severe hallux valgus. We reviewed 76 patients (86 feet) that underwent distal chevron osteotomy with a distal soft tissue procedure for symptomatic moderate to severe hallux valgus deformity. At a mean followup of 31 months, all patients were evaluated using subjective, objective and radiographic measurements. Ninety-four percent of the patients were very satisfied or satisfied. Average AOFAS score improved from 54.7 points preoperatively to 92.9 at final followup. Average hallux valgus angle changed from 36.2 degrees preoperatively to 12.4 degrees at final followup, and average first-second intermetatarsal angle changed from 17.1 to 7.3 degrees. Average tibial sesamoid position changed from 2.4 preoperatively to 1.2 at final followup. Dorsal angulation of the head was observed in two feet, and plantaflexion of the head in four feet. There were no cases of avascular necrosis of the metatarsal head. Our results indicate that distal chevron osteotomy with a distal soft tissue procedure provides an effective and reliable means of correcting moderate to severe hallux valgus deformity, and that it does so with high levels of patient satisfaction and low incidence of complications.
[Ligament-controlled positioning of the knee prosthesis components].
Widmer, K-H; Zich, A
2015-04-01
There are at least two predominant goals in total knee replacement: first, the surgeon aims to achieve an optimal postoperative kinematic motion close to the patient's physiological range, and second, he aims for concurrent high ligament stability to establish pain-free movement for the entire range of motion. A number of prosthetic designs and surgical techniques have been developed in recent years to achieve both of these targets. This study presents another modified surgical procedure for total knee implantation. As in common practice the osteotomies are planned preoperatively, referencing well-defined bony landmarks, but their placement and orientation are also controlled intraoperatively in a stepwise sequence via ligamentous linkages. This method is open to all surgical approaches and can be applied for PCL-conserving or -sacrificing techniques. The anterior femoral osteotomy is carried out first, followed by the distal femoral osteotomy. Then, the extension gap is finalized by tensioning the ligaments and "top-down" referencing at the level of the tibial osteotomy, followed by finishing the flexion gap in the same way, except that the osteotomy of the posterior condyles is referenced in a "bottom-up" fashion. Hence, this technique relies on both bony and ligament-controlled procedures. Thus, it respects the modified ligamentous framework and drives the prosthetic components into the new ligamentous envelope. Further improvement may be achieved by additional control of the kinematics during surgery by applying modern computer navigation technology.
A Comparison of Removal Rates of Headless Screws Versus Headed Screws in Calcaneal Osteotomy.
Kunzler, Daniel; Shazadeh Safavi, Pejma; Jupiter, Daniel; Panchbhavi, Vinod K
2017-11-01
Calcaneal osteotomy has been used to successfully treat both valgus and varus hindfoot deformities. Pain associated with implanted hardware may lead to further surgical intervention for hardware removal. Headless screws have been used to reduce postoperative hardware-associated pain and accompanying hardware removal, but data proving their effectiveness in this regard is lacking. The purpose of this study is to compare the rates of removal of headed and headless screws utilized in calcaneal osteotomy. We conducted a retrospective chart review of 74 patients who underwent calcaneal osteotomy between January 2010 and December 2014. The cohort was divided into 2 groups by fixation method: a headed screw and a headless screw group. Bivariate associations between infection or hardware removal, and screw type, screw head width, gender, smoking status, alcohol, hypertension, diabetes, hyperlipidemia, age, and body mass index were assessed using t-tests and Fisher's exact/χ 2 tests for continuous and discrete variables, respectively. Headed screws were removed more frequently than headless screws (P < .0001): 15 of 30 (50%) feet that received headed screws and 4 of 44 (9%) of feet that received headless screws underwent subsequent revision for screw removal. In all cases, screws were removed because of pain. The calcaneal union rate was 100% in both cohorts. The rate of screw removal in calcaneal osteotomies is significantly lower in patients who receive headless screws than in those receiving headed screws. Level IV.
Müller, Christian W.; Pfeifer, Ronny; Meier, Karen; Decker, Sebastian; Reifenrath, Janin; Gösling, Thomas; Wesling, Volker; Krettek, Christian; Krämer, Manuel
2015-01-01
Nickel-titanium shape memory alloy (NiTi-SMA) implants might allow modulating fracture healing, changing their stiffness through alteration of both elastic modulus and cross-sectional shape by employing the shape memory effect (SME). Hypotheses: a novel NiTi-SMA plate stabilizes tibia osteotomies in rabbits. After noninvasive electromagnetic induction heating the alloy exhibits the SME and the plate changes towards higher stiffness (inverse dynamization) resulting in increased fixation stiffness and equal or better bony healing. In 14 rabbits, 1.0 mm tibia osteotomies were fixed with our experimental plate. Animals were randomised for control or induction heating at three weeks postoperatively. Repetitive X-ray imaging and in vivo measurements of bending stiffness were performed. After sacrifice at 8 weeks, macroscopic evaluation, µCT, and post mortem bending tests of the tibiae were carried out. One death and one early implant dislocation occurred. Following electromagnetic induction heating, radiographic and macroscopic changes of the implant proved successful SME activation. All osteotomies healed. In the treatment group, bending stiffness increased over time. Differences between groups were not significant. In conclusion, we demonstrated successful healing of rabbit tibia osteotomies using our novel NiTi-SMA plate. We demonstrated shape-changing SME in-vivo through transcutaneous electromagnetic induction heating. Thus, future orthopaedic implants could be modified without additional surgery. PMID:26167493
Galli, Silvia; Jimbo, Ryo; Tovar, Nick; Yoo, Daniel Y; Anchieta, Rodolfo B; Yamaguchi, Satoshi; Coelho, Paulo G
2015-03-01
The drilling technique and the surface characteristics are known to influence the healing times of oral implants. The influence of osteotomy dimension on osseointegration of microroughned implant surfaces treated with resorbable blasting media was tested in an in vivo model. Ninety-six implants (ø4.5 mm, 8 mm in length) with resorbable blasting media-treated surfaces were placed in the ileum of six sheep. The final osteotomy diameters were 4.6 mm (reamer), 4.1 mm (loose), 3.7 mm (medium), and 3.2 mm (tight). After three and six weeks of healing, the implants were biomechanically tested and histologically evaluated. Statistical analysis was performed using Page L trend test for ordered and paired sample and linear regression, with significance level at p < 0.05. An overall increase in all dependent variables was observed with the reduction of osteotomy diameter. In addition, all osseointegration scores increased over time. At three weeks, the retention was significantly higher for smaller osteotomies. The histological sections depicted intimate contact of bone with all the implant surfaces and osteoblast lines were visible in all sections. The resorbable blasting media microroughed surfaces achieved successful osseointegration for all the instrumentation procedures tested, with higher osseointegration scores for the high insertion torque group. © The Author(s) 2014 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.
Anesi, Alexandre; Ferretti, Marzia; Cavani, Francesco; Salvatori, Roberta; Bianchi, Michele; Russo, Alessandro; Chiarini, Luigi; Palumbo, Carla
2018-01-01
Clinical advantages of piezosurgery have been already proved. However, few investigations have focused on the dynamics of bone healing. The aim of this study was to evaluate, in adult rabbits, bone regeneration after cranial linear osteotomies with two piezoelectrical devices (Piezosurgery ® Medical - PM and Piezosurgery ® Plus - PP), comparing them with conventional rotary osteotomes (RO). PP was characterized by an output power three times higher than PM. Fifteen days after surgery, histomorphometric analyses showed that the osteotomy gap produced with PM and PP was about half the size of that produced by RO, and in a more advanced stage of recovery. Values of regenerated bone area with respect to the total osteotomy area were about double in PM and PP samples compared with RO ones, while the number of TRAP-positive (tartrate-resistant acid phosphatase positive) osteoclasts per linear surface showed a significant increase, suggesting greater bone remodelling. Under scanning electron microscopy, regenerated bone displayed higher cell density and less mineralized matrix compared with pre-existent bone for all devices used. Nanoindentation tests showed no changes in elastic modulus. In conclusion, PM/PP osteotomies can be considered equivalent to each other, and result in more rapid healing compared with those using RO. Copyright © 2017 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.
What Is the Role for Patelloplasty With Gullwing Osteotomy in Revision TKA?
Gililland, Jeremy M; Swann, Presley; Pelt, Christopher E; Erickson, Jill; Hamad, Nadia; Peters, Christopher L
2016-01-01
Management of the patella in revision total knee arthroplasty (TKA) is challenging as a result of the deficient or unusable bone stock for patellar resurfacing that is frequently encountered. Options proposed in this setting include various patelloplasty procedures, patellectomy, and special patellar components. We sought to better define the role and results of one patelloplasty procedure, the gullwing osteotomy, used in revision TKA. (1) How much improvement in the outcome measures of range of motion and Knee Society scores was seen after revision TKA with a gullwing osteotomy? (2) What are the radiographic results of this osteotomy as judged by patellar healing and patellar tracking? (3) What complications are associated with the gullwing osteotomy in revision TKA? Between December 2003 and July 2012, we used a gullwing osteotomy on patients undergoing revision TKA (n = 238) in which the patellar remnant was avascular or less than 12 mm thick. This uncommon procedure was used in 17 of 115 (15%) of the patellae revised during this time. We performed manual chart reviews on all patients to collect preoperative and postoperative range of motion and Knee Society scores as well as radiographic review at last followup to assess patellar healing and tracking. In patients with at least 2 years of followup, the preoperative range of motion was a median -7.5° of extension (interquartile range [IQR], -15°-0°) and 90° of flexion (IQR, 90°-100°). Postoperative extension improved to 0° (IQR, 0°-0°; p = 0.015). With the numbers available, median flexion arc did not change at last followup (110°; IQR, 95°-120°; p = 0.674). The Knee Society score improved from a combined (clinical + functional) mean of 86 (95% confidence interval [CI], 56-116) preoperatively to 142 (95% CI, 121-163; p < 0.001) postoperatively. Radiographically, 12 of 13 patients demonstrated healing of the osteotomy with osseous union and one patient healed with a fibrous union. Nine of the 10 patients with at least 2 years of followup had a centrally tracking gullwing osteotomized patella at last followup. One patient, with just over 3 years of followup, exhibited lateral subluxation without evidence of fracture. Three of the 10 patients with greater than 2 years of followup developed recurrent infections. One patient had avascular necrosis with fragmentation of the patella at 4 months postoperatively. Patellar bone stock is often compromised in revision TKA, leaving the surgeon with very few options for reconstruction. Using this technique, we found acceptable function, no aseptic rerevisions for patellofemoral complications, nine of 10 of patellae tracking within the trochlear groove, and radiographic healing of the majority of the osteotomies. The gullwing osteotomy may be considered an option in these difficult revisions, but further studies with more complete followup are needed. Level IV, therapeutic study.
Interventions for treating hallux valgus (abductovalgus) and bunions.
Ferrari, J; Higgins, J P T; Prior, T D
2004-01-01
Hallux valgus is classified as an abnormal deviation of the great toe (hallux) towards the midline of the foot. To identify and evaluate the evidence from randomised trials of interventions used to correct hallux valgus. We searched the Cochrane Musculoskeletal Injuries Group trials register (2003/1), the Cochrane Central Register of Controlled Trials (The Cochrane Library issue 1, 2003), MEDLINE (January 1966 to March 2003) and EMBASE (1980 to January 2003). No language restrictions were applied. Hand searching of specific foot journals was also undertaken. Date of the most recent search: 31st March 2003. Randomised or quasi-randomised trials of both conservative and surgical treatments of hallux valgus. Excluded were studies comparing areas of surgery not specific to the control of the deformity such as use of anaesthetics or tourniquet placement. Methodological quality of trials which met the inclusion criteria was independently assessed by two reviewers. Data extraction was undertaken by two reviewers. The trials were grouped according to the interventions being compared, but the dissimilarity in the comparisons prevented pooling of results. The methodological quality of the 21 included trials was generally poor and trial sizes were small. Three trials involving 332 participants evaluated conservative treatments versus no treatment. There was no evidence of a difference in outcomes between treatment and no treatment. One good quality trial involving 140 participants compared surgery to conservative treatment. Evidence was shown of an improvement in all outcomes in patients receiving chevron osteotomy compared with those receiving orthoses. The same trial also compared surgery to no treatment in 140 participants. Evidence was shown of an improvement in all outcomes in patients receiving chevron osteotomy compared with those receiving no treatment. Two trials involving 133 people with hallux valgus compared Keller's arthroplasty with other surgical techniques. In general, there was no advantage or disadvantage using Keller's over the other techniques. When the distal osteotomy was compared to Keller's arthroplasty, the osteotomy showed evidence of improving the intermetatarsal angle and preserving joint range of motion. The arthroplasty was found to have less of an impact on walking ability compared to the arthrodesis. Six trials involving 309 participants compared chevron (and chevron-type) osteotomy with other techniques. The chevron osteotomy offered no advantages in these trials. For some outcomes, other techniques gave better results. Two of these trials (94 participants) compared a type of proximal osteotomy to a proximal chevron osteotomy and found no evidence of a difference in outcomes between techniques. Three trials involving 157 participants compared outcomes between original operations and surgeon's adaptations. There was no advantage found for any of the adaptations. Three trials involving 71 people with hallux valgus compared new methods of fixation to traditional methods. There was no evidence that the new methods of fixation were detrimental to the outcome of the patients. Four trials involving 162 participants evaluated methods of post-operative rehabilitation. The use of continuous passive motion appeared to give an improved range of motion and earlier recovery following surgery. Early weightbearing or the use of a crepe bandage were not found to be detrimental to final outcome. Only a few studies had considered conservative treatments. The evidence from these suggested that orthoses and night splints did not appear to be any more beneficial in improving outcomes than no treatment. Surgery (chevron osteotomy) was shown to be beneficial compared to orthoses or no treatment, but when compared to other osteotomies, no technique was shown to be superior to any other. Only one trial had compared an osteotomy to an arthroplasty. There was limited evidence to suggest that the osteotomy gat the osteotomy gave the better outcomes. It was notable that the numbers of participants in some trials remaining dissatisfied at follow-up were consistently high (25 to 33%), even when the hallux valgus angle and pain had improved. A few of the more recent trials used assessment scores that combine several aspects of the patients outcomes. These scoring systems are useful to the clinician when comparing techniques but are of dubious relevance to the patient if they do not address their main concern and such scoring systems are frequently unvalidated. Only one study simply asked the patient if they were better than before the treatment. Final outcomes were most frequently measured at one year, with a few trials maintaining follow-up for 3 years. Such time-scales are minimal given that the patients will be on their feet for at least another 20-30 years after treatment. Future research should include patient-focused outcomes, standardised assessment criteria and longer surveillance periods, more usefully in the region of 5-10 years.
A Case of Successful Surgical Repair for Pectus Arcuatum Using Chondrosternoplasty
Kim, Sang Yoon; Park, Samina; Kim, Eung Rae; Park, In Kyu; Kim, Young Tae; Kang, Chang Hyun
2016-01-01
Pectus arcuatum is a rare complex chest wall deformity. A 31-year-old female presented with a severely protruding upper sternum combined with a concave lower sternum. We planned a modified Ravitch-type operation. Through vertical mid-sternal incision, chondrectomies were performed from the second to fifth costal cartilages, saving the perichondrium. Horizontal osteotomy was performed in a wedge shape on the most protruding point, and followed by an additional partial osteotomy at the most concaved point. The harvested wedge-shape bone fragments were minced and re-implanted to the latter osteotomy site. The osteotomized sternum was fixed with multiple wirings. With chondrosternoplasty, a complex chest wall deformity can be corrected successfully. PMID:27298803
A Case of Successful Surgical Repair for Pectus Arcuatum Using Chondrosternoplasty.
Kim, Sang Yoon; Park, Samina; Kim, Eung Rae; Park, In Kyu; Kim, Young Tae; Kang, Chang Hyun
2016-06-01
Pectus arcuatum is a rare complex chest wall deformity. A 31-year-old female presented with a severely protruding upper sternum combined with a concave lower sternum. We planned a modified Ravitch-type operation. Through vertical mid-sternal incision, chondrectomies were performed from the second to fifth costal cartilages, saving the perichondrium. Horizontal osteotomy was performed in a wedge shape on the most protruding point, and followed by an additional partial osteotomy at the most concaved point. The harvested wedge-shape bone fragments were minced and re-implanted to the latter osteotomy site. The osteotomized sternum was fixed with multiple wirings. With chondrosternoplasty, a complex chest wall deformity can be corrected successfully.
One-stage lengthening and derotational osteotomy of the femur stabilised with a gamma nail.
van Doorn, R; Leemans, R; Stapert, J W
1999-12-01
To study the results of a one-stage lengthening and derotational osteotomy stabilised with a Gamma nail. Retrospective study. 2 hospitals, The Netherlands. 5 patients after failed osteosynthesis of femoral fractures. Mean lengthening of 3 cm and derotation of 30 degrees. Complications and functional results, after a mean follow-up of 43 months (range 30-57). Two patients required dynamisation and a cancellous bone graft to achieve union, which resulted in 1 and 1.5 cm loss of length. One patient had a temporary peroneal neurapraxy. No infections were observed. Our method is not an ultimate solution, but is suitable for one-stage lengthening and derotation osteotomies.
Schendel, Stephen A; Hazan-Molina, Hagai; Aizenbud, Dror
2014-04-01
Dentofacial deformities are traditionally treated by maxillary and mandibular osteotomies conducted separately or simultaneously. Recently, distraction osteogenesis has become an irreplaceable part of the surgical armamentarium, for its ability to induce new bone formation between the surfaces of bone segments that are gradually separated by incremental traction, along with a simultaneous expansion of the surrounding soft-tissue envelope. The aim of this article is to describe a combined surgical technique consisting of simultaneous maxillary Le Fort I advancement and mandibular surgical repositioning by means of bilateral sagittal split osteotomy with a curvilinear distractor based on a preliminary computerized presurgical prediction.
Modified Chevron osteotomy for hallux valgus deformity in female athletes. A 2-year follow-up study.
Giotis, Dimitrios; Paschos, Nikolaos K; Zampeli, Franceska; Giannoulis, Dionisios; Gantsos, Apostolos; Mantellos, George
2016-09-01
Hallux valgus is an increasingly common deformity in young female athletes that constricts their daily athletic activities and influences foot cosmesis. The aim of this study was to evaluate the outcome of modified Chevron osteotomy for hallux valgus deformity in this specific population. Forty-two cases of modified Chevron osteotomies were carried out in 33 patients with mild to moderate hallux valgus deformity. Each participant was evaluated for AOFAS score, pain, range of motion, cosmetic and radiological outcome. Mean AOFAS score improved to 96.3 (p<0.001) while the mean range of motion of the metatarsophalangeal joint was maintained (p=0.138). The cosmetic result was excellent/good in 40 cases (95%). Mean metatarsophalangeal and intermetatarsal angles were decreased from 29.8° and 14.2° preoperatively to 12.2° and 8.1° postoperatively (p<0.001 and p<0.036), respectively. Modified Chevron osteotomy could offer substantial correction of hallux valgus deformity in young female athletes, with excellent clinical outcome. Copyright © 2015 European Foot and Ankle Society. Published by Elsevier Ltd. All rights reserved.
An evaluation of various methods of treatment for Legg-Calvé-Perthes disease.
Wang, L; Bowen, J R; Puniak, M A; Guille, J T; Glutting, J
1995-05-01
An analysis of 5 methods of treatment for Legg-Calvé-Perthes disease was done on 124 patients with 141 affected hips. Before treatment, all groups were statistically similar concerning initial Mose measurement, age at onset of the disease, gender, and Catterall class. Treatments included the Scottish Rite orthosis (41 hips), nonweight bearing and exercises (41 hips), Petrie cast (29 hips), femoral varus osteotomy (15 hips), or Salter osteotomy (15 hips). Hips treated by the Scottish Rite orthosis had a significantly worse Mose measurement across time interaction (repeated measures analysis of variance, post hoc analyses, p < 0.05). For the other 4 treatment methods, there was no statistically different change. At followup, the Mose measurements for hips treated with the Scottish Rite orthosis were significantly worse than those for hips treated by nonweight bearing and exercises, Petrie cast, varus osteotomy, or Salter osteotomy (repeated measures analysis of variance, post hoc analyses, p < 0.05). There was, however, no significant difference in the distribution of hips according to the Stulberg et al classification at the last followup.
Ultrasonometry evaluation of axial compression osteosinthesis. An experimental study
Bezuti, Márcio Takey; Mandarano, Luiz Garcia; Barbieri, Giuliano; Mazzer, Nilton; Barbieri, Cláudio Henrique
2013-01-01
OBJECTIVE: To measure the ultrasound propagation velocity (UV) through a tibial transverse osteotomy in sheep, before and after the fixation with a DCP plate. MATERIAL AND METHODS: Ten assemblies of a DCP plate with the diaphyseal segment of tibiae, in which a transverse osteotomy was made, were used. Both coronal and sagittal transverse and the axial UV were measured, first with the intact bone assembled with the plate and then with the uncompressed and compressed osteotomy; statistical comparisons were made at the 1% (p<0.01) level of significance. RESULTS: Compared with the intact bone assembly, axial UV significantly decreased with the addition of the osteotomy and significantly increased with compression, presenting the same behavior for the other modalities, although not significantly. DISCUSSION AND CONCLUSION: In accordance with the literature data on the ultrasonometric evaluation of fracture healing, underwater UV measurement was able to demonstrate the efficiency of DCP plate fixation. The authors conclude that the method has a potential for clinical application in the postoperative follow-up of DCP plate osteosinthesis, with a capability to demonstrate when it becomes ineffective. Laboratory investigation. PMID:24453644
Rhyu, K H; Kim, Y H; Park, W M; Kim, K; Cho, T-J; Choi, I H
2011-09-01
In experimental and clinical research, it is difficult to directly measure responses in the human body, such as contact pressure and stress in a joint, but finite element analysis (FEA) enables the examination of in vivo responses by contact analysis. Hence, FEA is useful for pre-operative planning prior to orthopaedic surgeries, in order to gain insight into which surgical options will result in the best outcome. The present study develops a numerical simulation technique based on FEA to predict the surgical outcomes of osteotomy methods for the treatment of slipped capital femoral epiphyses. The correlation of biomechanical parameters including contact pressure and stress, for moderate and severe cases, is investigated. For severe slips, a base-of-neck osteotomy is thought to be the most reliable and effective surgical treatment, while any osteotomy may produce dramatic improvement for moderate slips. This technology of pre-operative planning using FEA can provide information regarding biomechanical parameters that might facilitate the selection of optimal osteotomy methods and corresponding surgical options.
In vitro investigation of biomechanical changes of the hip after Salter pelvic osteotomy.
Pfeifer, R; Hurschler, C; Ostermeier, S; Windhagen, H; Pressel, T
2008-03-01
Salter innominate osteotomy of the pelvis is widely used to improve the coverage of the femoral head in developmental dysplasia of the hip, but the biomechanical and geometric changes after this osteotomy are not well understood. A CT dataset of an 8-year-old child with severe dysplasia of both hips was used to create a polyamide model of the left hemipelvis and proximal femur. The hemipelvis was mounted to a holding device and the proximal femur attached to a sensor guided industrial robot. The robot was programmed to apply joint forces and torques based on single-leg stance. Two major muscles were represented by wires connected to hydraulic cylinders; muscle forces were adjusted to balance the joint moments. Resulting joint forces were measured using a pressure measuring sensor before and after Salter osteotomy of the hip. Geometric changes were recorded using a three-dimensional ultrasound measurement system. The preoperative hip joint resultant force was 583N (270% body weight), while after the operation a mean force of 266N (120% body weight) was measured. Postoperative muscle forces were roughly half the preoperative values. The hip joint was translated medially and caudally. Postoperatively, the length of gluteus medius and maximus muscles increased. The preoperative value of the resultant hip joint force is comparable to values reported in the literature. The results suggest that Salter innominate osteotomy leads to a reduction of hip joint and muscle forces in addition to increasing joint contact area.
Radiographic evaluation for AVN following distal metatarsal Stoffella bunion osteotomy.
Klein, Christian; Zembsch, Alexander; Dorn, Ulrich
2009-01-01
Avascular necrosis of the metatarsal head, delayed bone healing and nonunion are complications that may occur after distal first metatarsal osteotomies. Intraoperative damage to the extraosseous blood supply, the location of the osteotomy and postoperative vasospasm have been cited as possible causes of such changes. We evaluated Stoffella's subcapital osteotomies which were performed at our department for the correction of moderate to severe hallux valgus deformities. Standardized radiographs of 300 feet, taken 6weeks, 3 months, and 6 months postoperatively and at the final followup were examined with regard to postoperative AVN or signs of delayed bone healing. Of 228 patients, 202 were women and 26 were men. The patients' mean age was 49 years, and the mean followup was 12 months. In 278 cases the radiographs revealed an unremarkable first metatarsal head. Seventeen cases showed diffuse or localized osteopenia or small cysts in the subchondral bone. These changes fully resolved on subsequent radiographs. The X-rays of two patients revealed progressive narrowing of the joint space, irregular contours on the surface of the joint and an abnormal bone structure. The patients subsequently developed a characteristic picture of avascular necrosis, in one case combined with nonunion. Three patients had delayed bone healing, but ultimately healed successfully. Ischemic changes in bone are known to occur after distal first metatarsal osteotomies. There is a very low incidence of postoperative perfusion problems after Stoffella;s technique, even with lateral soft tissue release.
Lee, Ho-Jin; Chung, Jin-Wha; Chu, In-Tak; Kim, Yoon-Chung
2010-04-01
A lateral soft tissue release is often performed with distal chevron osteotomy for the correction of hallux valgus deformities. However, many complications of lateral soft tissue release have been reported. To define the necessity of lateral soft tissue release, the authors compared the clinical and radiographic results of distal chevron osteotomy with and without it. 86 consecutive patients (152 feet) were enrolled in this prospective study. In Group A, 45 patients (74 feet) underwent a chevron osteotomy with lateral soft tissue release. In Group B, 41 patients (78 feet) underwent a chevron osteotomy without it. Mean followup was 1.7 years and 2.1 years, respectively. The hallux valgus angle (HVA) and intermetatarsal angle (IMA), and AOFAS score were measured preoperatively, and 1-year followup postoperatively and complications were evaluated. The change in HVA, IMA and AOFAS score were insignificant (p > 0.05) between Group A and Group B, however, the range of motion of the first metatarsophalangeal joint was significantly less in Group A (p < 0.05). Complications of digital neuritis and cosmetically dissatisfied scarring of the dorsal web space were seen only in Group A. No cases had avascular necrosis of the metatarsal head, malunion or nonunion. Lateral soft tissue release may not be needed for mild or moderate hallux valgus deformities which may prevent decreased range of motion of the first metatarsophalangeal joint, neuritis of dorsal or plantar lateral digital nerve and cosmetic dissatisfaction of a dorsal scar.
Scarf versus chevron osteotomy in hallux valgus: a randomized controlled trial in 96 patients.
Deenik, A R; Pilot, P; Brandt, S E; van Mameren, H; Geesink, R G T; Draijer, W F
2007-05-01
The degree of correction of hallux valgus deformity using a distal chevron osteotomy is reported as limited. The scarf osteotomy is reported to correct large intermetatarsal angles (IMA). The purpose of this study was to evaluate if one technique gave greater correction of the IMA and hallux valgus angle (HVA) than the other. After informed consent, 96 feet in 83 patients were randomized into two treatment groups (49 scarf and 47 chevron osteotomies). The results were evaluated using the American Orthopaedic Foot and Ankle Society (AOFAS) Hallux Valgus Scale and radiographic HVA and IMA measurements. At 27 (range 23-31) months followup both groups improved. The AOFAS score in the chevron group improved from 48 to 89 points and in the scarf group from 47 to 91 points. In the chevron group the HVA corrected from 30 to 17 degrees, and in the scarf group the HVA corrected from 29 to 18 degrees. In both groups, the IMA was corrected from 13 to 10 degrees. The differences were not statistically significant. Three patients in the chevron group developed a partial metatarsal head necrosis. In the scarf group, four patients developed grade 1 complex regional pain syndrome compared to one patient in the chevron group. No differences of statistical significance could be measured between the two groups with respect to the AOFAS score, HVA, and IMA. Although both groups showed good to excellent results, we favor the chevron osteotomy because the procedure is technically less demanding.
A modified Austin/chevron osteotomy for treatment of hallux valgus and hallux rigidus.
Vasso, Michele; Del Regno, Chiara; D'Amelio, Antonio; Schiavone Panni, Alfredo
2016-03-01
The purpose of this brief paper is to present the preliminary results of a modified Austin/chevron osteotomy for treatment of hallux valgus and hallux rigidus. In this procedure, the dorsal arm of the osteotomy is performed orthogonal to the horizontal plane of the first metatarsal, the main advantage being that this allows much easier and more accurate multiplanar correction of first metatarsal deformities. From 2010 to 2013, 184 consecutive patients with symptomatic hallux valgus and 48 patients with hallux rigidus without severe metatarsophalangeal joint degeneration underwent such modified chevron osteotomy. Mean patient age was 54.9 (range 21-70) years, and mean follow-up duration was 41.7 (range 24-56) months. Ninety-three percent of patients were satisfied with the surgery. Mean American Orthopaedic Foot and Ankle Society (AOFAS) score improved from 56.6 preoperatively to 90.6 at last follow-up, and mean visual analog scale (VAS) pain score decreased from 5.7 preoperatively to 1.6 at final follow-up (p < 0.05). In patients treated for hallux valgus, mean hallux valgus angle decreased from 34.1° preoperatively to 6.2° at final follow-up, and mean intermetatarsal angle decreased from 18.5° preoperatively to 4.1° at final follow-up (p < 0.05). One patient developed postoperative transfer metatarsalgia, treated successfully with second-time percutaneous osteotomy of the minor metatarsals, whilst one patient had wound infection that resolved with systemic antibiotics. Level IV.
Murphy, Ryan M; Fallat, Lawrence M; Kish, John P
2014-01-01
The distal chevron osteotomy is a widely accepted technique for the treatment of hallux abductovalgus deformity. Although the osteotomy is considered to be stable, displacements of the capital fragment has been described. We propose a new method for fixation of the osteotomy involving the axial loading screw (ALS) used in addition to single screw fixation. We believe this method will provide a more mechanically stable construct. We reviewed the charts of 46 patients in whom 52 feet underwent a distal chevron osteotomy that was fixated with either 1 screw or 2 screws that included the ALS. We hypothesized that the ALS group would have fewer displacements and would heal more quickly than the single screw fixation group. We found that the group with ALS fixation had healed at a mean of 6.5 weeks and that the group with single screw fixation had healed at 9.53 weeks (p = .001). Also, 8 cases occurred of displacement of the capital fragment in the single screw, control group compared with 2 cases of displacement in the ALS group. However, this finding was not statistically significant. The addition of the ALS to single screw fixation allowed the patients to heal approximately 3 weeks earlier than single screw fixation alone. The ALS is a fixation option for the surgeon to consider when osseous correction of hallux abducto valgus is performed. Copyright © 2014 American College of Foot and Ankle Surgeons. Published by Elsevier Inc. All rights reserved.
Pentikainen, Ilkka; Ojala, Risto; Ohtonen, Pasi; Piippo, Jouni; Leppilahti, Juhana
2014-12-01
The purpose of this article was to analyze the long-term radiologic results after distal chevron osteotomy for hallux valgus treatment and to determine the preoperative radiographic factors correlating with radiological recurrence of the deformity. The study included 100 consecutive patients who received distal chevron osteotomy for hallux valgus. The osteotomy included fixation with an absorbable pin in 50 cases, and no fixation in the other 50. For 6 weeks postoperatively, half of each group used a soft cast and half had a traditional elastic bandage. Weight-bearing radiographs were evaluated at 6 weeks, 6 months, 1 year, and a mean of 7.9 (range, 5.8-9.4) years postoperatively. At the final follow-up, radiological recurrence of hallux valgus deformity (HVA > 15 degrees) was observed in 56 feet (73%). Eleven feet (14%) had mild recurrence (HVA < 20 degrees), 44 (57%) moderate (20 degrees ≥ HVA < 40 degrees), and 1 (1%) severe (HVA ≥ 40 degrees). All recurrences were painless, and thus no revision surgery was required. Long-term hallux valgus recurrence was significantly affected by preoperative congruence, DMAA, sesamoid position, HVA, and I/II IMA. Radiological recurrence of hallux valgus deformity of 15 degrees or more was very common at long-term follow-up after distal chevron osteotomy. Preoperative congruence, DMAA, sesamoid position (LaPorta), HVA, and I/II IMA significantly affected recurrence. Level III, comparative case series. © The Author(s) 2014.
Wang, Bo; Shen, Guo-fang; Fang, Bing; Sun, Liang-yan; Wu, Yong; Jiang, Ling-yong; Zhu, Min
2012-10-01
To investigate the changes of periodontal conditions after micro-osteotomy assisted lower incisor decompensation for skeletal Class III malocclusions with alveolar hypoplasia in the lower anterior region. The sample consisted of 22 cases diagnosed as skeletal Class III malocclusions with alveolar hypoplasia in the lower anterior region, selected from consecutive patients of Department of Oral & Cranio-maxillofacial Science of Shanghai Ninth People's Hospital during 2009-2012. The samples were divided into 2 groups; G1 comprised 10 patients who accepted micro-osteotomy assisted lower incisor decompensation; G2 comprised 12 patients who chose traditional pre-surgical decomposition. The changes of periodontal conditions of both groups were evaluated with the help of cone-beam CT(CBCT). Data was processed using SAS8.02 software package. For subjects in G1, during the micro-osteotomy assisted pre-surgical orthodontics, no significant difference was found in the amount of root resorption of lower incisors.But labial and lingual vertical alveolar bone loss were 2.60 mm and 2.22 mm; alveolar bone thickness increased by 3.05 mm on the labial side and decreased by 0.88 mm on the lingual side (P<0.05). Better periodontal conditions were reserved compared with those of G2. Micro-osteotomy assisted pre-surgical orthodontics was much safer than traditional orthodontics for skeletal Class III malocclusions with alveolar hypoplasia in the lower anterior region.
Treatment of Insertional Achilles Pathology With Dorsal Wedge Calcaneal Osteotomy in Athletes.
Georgiannos, Dimitrios; Lampridis, Vasilis; Vasiliadis, Angelos; Bisbinas, Ilias
2017-04-01
Insertional Achilles tendinopathy and retrocalcaneal bursitis is difficult to treat, and several operative techniques have been used after failure of conservative management. Dorsal wedge calcaneal osteotomy has been described for the treatment of insertional Achilles pathology. It was hypothesized that dorsal wedge calcaneal osteotomy would be an effective and safe method for the treatment of athletes with insertional Achilles pathology unrelieved by nonoperative measures. Fifty-two athletes (64 feet) who had painful Achilles tendon syndrome unrelieved by 6 months of nonoperative measures were treated surgically. Dorsally based wedge calcaneal osteotomy was performed through a lateral approach, and 2 staples were used for fixation. Patients were scored pre- and postoperatively with the American Orthopaedic Foot & Ankle Society (AOFAS) ankle-hindfoot and Victorian Institute of Sports of Australia-Achilles (VISA-A) scores. At a minimum follow-up of 3 years, the patients' AOFAS and VISA-A scores improved from 59.5 ± 15.0 and 65.9 ± 11.1 preoperatively to 95.7 ± 6.2 and 90.2 ± 8.4 postoperatively, respectively. Clinical results were considered excellent in 38 patients, good in 12 patients, and fair in 2 patients. Return to previous sports activity time was 21 (SD, 8.0) weeks. One patient necessitated a revision operation. Operative treatment of insertional Achilles pathology in athletes with dorsal closing wedge calcaneal osteotomy was a safe and effective method that allowed for a quicker return to previous level of sports activities compared with other techniques. Level IV, retrospective case series.
Total knee replacement with tibial tubercle osteotomy in rheumatoid patients with stiff knee.
Eid, Ahmed Salem; Nassar, Wael Ahmed Mohamed; Fayyad, Tamer Abdelmeguid Mohamed
2016-11-01
Total knee arthroplasty (TKA) is a well-proven modality that can provide pain relief and restore mobility for rheumatoid arthritis (RA) patients with advanced joint destruction. Patellar ligament avulsion, especially in presence of poor bone quality and knee stiffness, is one of the special considerations that must be addressed in this unique population of patients. This study aimed to determine the functional results in a series of rheumatoid patients with stiff knee and end-stage joint destruction who underwent tibial tubercle osteotomy during TKA. Twenty-three knees in 20 patients (16 women; four men) at a mean age of 54 years with end-stage arthritis and knee stiffness due to RA were operated upon for TKA using tibial tubercle osteotomy as a step during the operation. Patients were reviewed clinically and radiographically with a minimum follow-up of two years. Complications were noted. Hospital for Special Surgery (HSS) score was recorded pre-operatively and at six and 12 months postoperatively. Union occurred at the osteotomy site in 21 of 23 cases. One case had deep venous thrombosis (DVT). There was no infection or periprosthetic fracture, and at last follow-up, no patient required revision. HSS score improved from 46 (15-60) pre-operatively to 85 (71-96) post-operatively. Tibial tubercle osteotomy during TKA in patients with RA and stiff knee is technically demanding yet proved to be effective in improving post-operative range of movement and minimising the complication of patellar ligament avulsion.
Bohatyrewicz, A
1992-01-01
Whenever the conservative procedure fails to bring about congruence of the dysplastic hip joint, an operative procedure becomes indispensable. In Orthopaedic Clinic of the Pomeranian Medical Academy in Szczecin we implement the oblique three-dimensional intertrochanteric detorsion and varus forming osteotomy after Bernbeck in order to correct the proximal end of the femoral bone. Precise determination of the plane to be cut, prior to the operative procedure, simplifies and shortens the operation itself and facilitates the achieving of the planned angular values in all three planes. Mathematical model of osteotomy according to Bernbeck considering required angles of correction as well as angles determining the plane of osteotomy was worked out. In collaboration of the Szczecin Technical University, a simple computer program was elaborated which allowed the presentation of the results in the form of tables. With the help of tables the optimal cutting plane was chosen and created correct biomechanical and anatomical conditions as well as optimal conditions for stable osteosynthesis of dissected fragments of the femoral bone. That type of osteotomy is useful in most operative correcrions of the dysplastic hip joint (not great varus formation connected with relatively extensive detorsion). The achieved congruence in the 22 dysplastic hip joints operated on was the most important condition for their later physiological development. Short post-operative observations confirm the value of described mathematic model.
A Modification of the Dunn Osteotomy With Preservation of the Ligamentum Teres.
Bali, Navi; Harrison, James; Laugharne, Edward; Bache, C Edward
2017-06-01
We aimed to determine if a modified Dunn osteotomy could be safely performed without surgical dislocation and consequent preservation of the ligamentum teres. All patients undergoing a modified Dunn osteotomy for a slipped capital femoral epiphysis over an 8-year period were included in this study, and all had a severe slip with an open physis. The modified Dunn procedure was performed on 34 hips in 34 patients. The mean age was 13.1 years (range, 11 to 16 y) with a mean follow-up time of 54 months (range, 15 to 102 mo). All slips were severe (grade 3) with a mean slip angle of 73.2 degrees (range, 60 to 90 degrees). Nineteen slips were stable and 15 were unstable. Of the unstable slips, the average time from initial presentation to the emergency department until surgery was 9.4 days (range, 2 to 42 d). Excluding 1 patient who developed complete collapse of the femoral head (NAHS 56), the average Nonarthritic Hip score was 98 (range, 93.7 to 100). Four (11.8%) patients developed avascular necrosis of the femoral head, of which 3 were unstable slips. A modified Dunn osteotomy with preservation of the ligamentum teres allows an excellent restoration of the anatomic alignment of the femoral head and neck. Rates of AVN are not increased compared with other techniques of subcapital osteotomy but this complication cannot be eliminated particularly in patients with unstable slips. Level III.
Neves, Paulo César Fagundes; de Campos Vieira Abib, Simone; Neves, Rogério Fagundes; Pircchio, Oronzo; Saad, Karen Ruggeri; Saad, Paulo Fernandes; Simões, Ricardo Santos; Moreira, Marcia Bento; de Souza Laurino, Cristiano Frota
2013-01-01
OBJECTIVES: The purpose is to study the effects of hyperbaric oxygen therapy and autologous platelet concentrates in healing the fibula bone of rabbits after induced fractures. METHODS: A total of 128 male New Zealand albino rabbits, between 6–8 months old, were subjected to a total osteotomy of the proximal portion of the right fibula. After surgery, the animals were divided into four groups (n = 32 each): control group, in which animals were subjected to osteotomy; autologous platelet concentrate group, in which animals were subjected to osteotomy and autologous platelet concentrate applied at the fracture site; hyperbaric oxygen group, in which animals were subjected to osteotomy and 9 consecutive daily hyperbaric oxygen therapy sessions; and autologous platelet concentrate and hyperbaric oxygen group, in which animals were subjected to osteotomy, autologous platelet concentrate applied at the fracture site, and 9 consecutive daily hyperbaric oxygen therapy sessions. Each group was divided into 4 subgroups according to a pre-determined euthanasia time points: 2, 4, 6, and 8 weeks postoperative. After euthanasia at a specific time point, the fibula containing the osseous callus was prepared histologically and stained with hematoxylin and eosin or picrosirius red. RESULTS: Autologous platelet concentrates and hyperbaric oxygen therapy, applied together or separately, increased the rate of bone healing compared with the control group. CONCLUSION: Hyperbaric oxygen therapy and autologous platelet concentrate combined increased the rate of bone healing in this experimental model. PMID:24141841
Sys, Gwen; Eykens, Hannelore; Lenaerts, Gerlinde; Shumelinsky, Felix; Robbrecht, Cedric; Poffyn, Bart
2017-06-01
This study analyses the accuracy of three-dimensional pre-operative planning and patient-specific guides for orthopaedic osteotomies. To this end, patient-specific guides were compared to the classical freehand method in an experimental setup with saw bones in two phases. In the first phase, the effect of guide design and oscillating versus reciprocating saws was analysed. The difference between target and performed cuts was quantified by the average distance deviation and average angular deviations in the sagittal and coronal planes for the different osteotomies. The results indicated that for one model osteotomy, the use of guides resulted in a more accurate cut when compared to the freehand technique. Reciprocating saws and slot guides improved accuracy in all planes, while oscillating saws and open guides lead to larger deviations from the planned cut. In the second phase, the accuracy of transfer of the planning to the surgical field with slot guides and a reciprocating saw was assessed and compared to the classical planning and freehand cutting method. The pre-operative plan was transferred with high accuracy. Three-dimensional-printed patient-specific guides improve the accuracy of osteotomies and bony resections in an experimental setup compared to conventional freehand methods. The improved accuracy is related to (1) a detailed and qualitative pre-operative plan and (2) an accurate transfer of the planning to the operation room with patient-specific guides by an accurate guidance of the surgical tools to perform the desired cuts.
Avery, C M E; Best, A; Patterson, P; Rolton, J; Ponter, A R S
2007-09-01
This study investigated the strengthening effect of different types of plate and position after osteotomy of the sheep tibia, which is a model for the radial osteocutaneous donor site. Fifty matched pairs of adult sheep tibias were tested in torsion and four-point bending. Firstly, the weakening effect of an osteotomy was compared with the intact bone. Then pairs of bones with an osteotomy were compared with and without reinforcement with different types of 3.5mm plate. The plate was placed in either the anterior (over the defect) or posterior (on the intact cortex) position. In torsion the mean strength of the intact bone was 45% greater than after osteotomy (P=0.02). The reinforced bone was on average 61% stronger than the unreinforced bone (P<0.001). In bending the mean strength of the intact bone was 188% greater than after osteotomy (P=0.02). The reinforced bone was on average 184% stronger then the unreinforced bone (P<0.001). The tibia was able to withstand much greater loads in bending. The dynamic compression plate was the strongest reinforcement in both torsion and bending. The position of the plate did not alter the strengthening effect in torsion but the posterior position resisted greater bending loads (P=0.01). This may not be relevant in clinical practice as the radius is likely to fracture first as a result of lower torsional forces.
Distal radius osteotomy with volar locking plates based on computer simulation.
Miyake, Junichi; Murase, Tsuyoshi; Moritomo, Hisao; Sugamoto, Kazuomi; Yoshikawa, Hideki
2011-06-01
Corrective osteotomy using dorsal plates and structural bone graft usually has been used for treating symptomatic distal radius malunions. However, the procedure is technically demanding and requires an extensive dorsal approach. Residual deformity is a relatively frequent complication of this technique. We evaluated the clinical applicability of a three-dimensional osteotomy using computer-aided design and manufacturing techniques with volar locking plates for distal radius malunions. Ten patients with metaphyseal radius malunions were treated. Corrective osteotomy was simulated with the help of three-dimensional bone surface models created using CT data. We simulated the most appropriate screw holes in the deformed radius using computer-aided design data of a locking plate. During surgery, using a custom-made surgical template, we predrilled the screw holes as simulated. After osteotomy, plate fixation using predrilled screw holes enabled automatic reduction of the distal radial fragment. Autogenous iliac cancellous bone was grafted after plate fixation. The median volar tilt, radial inclination, and ulnar variance improved from -20°, 13°, and 6 mm, respectively, before surgery to 12°, 24°, and 1 mm, respectively, after surgery. The median wrist flexion improved from 33° before surgery to 60° after surgery. The median wrist extension was 70° before surgery and 65° after surgery. All patients experienced wrist pain before surgery, which disappeared or decreased after surgery. Surgeons can operate precisely and easily using this advanced technique. It is a new treatment option for malunion of distal radius fractures.
Koc, Bulent; Koc, Eltaf Ayca; Erbek, Selim
2017-08-01
Our aim for this study was to evaluate and compare the clinical outcomes in patients who underwent lateral osteotomy with a Piezosurgery device or a conventional osteotome in open-technique rhinoplasty. This cohort trial involved 65 patients (36 women and 29 men; average age: 23.6 ± 5.71 yr) who underwent surgery between May 2015 and January 2016. Piezosurgery was used for lateral osteotomy in 32 patients, whereas 33 patients underwent conventional external osteotomy. These 2 groups were compared for duration of surgery, perioperative bleeding, postoperative edema, ecchymosis, pain, and patient satisfaction on the first and seventh postoperative days. The Piezosurgery group revealed significantly more favorable outcomes in terms of edema, ecchymosis, and hemorrhage on the first day postoperatively (p < 0.001 for all). Similarly, edema (p = 0.005) and ecchymosis (p < 0.001) on the seventh postoperative day also were better in the Piezosurgery group. Hemorrhage was similar in both groups on the seventh postoperative day (p = 0.67). The Piezosurgery group not only experienced less pain on the first postoperative day (p < 0.001), but these patients also were more satisfied with their results on both the first and seventh postoperative days. Results of the present study imply that Piezosurgery may be a promising, safe, and effective method for lateral osteotomy, a critical step in rhinoplasty. The time interval necessary for the learning curve is counteracted by the comfort and satisfaction of both patients and surgeons.
Köhnke, Robert; Kolk, Andreas; Kluwe, Lan; Ploder, Oliver
2017-09-01
To evaluate piezosurgery for bilateral sagittal split osteotomy (BSSO) for its duration and inferior alveolar nerve (IAN) perturbation. In this prospective randomized study, the authors evaluated 100 BSSO procedures in 50 patients. Piezoelectric (group I) and conventional (group II) osteotomies were carried out on each side of the mandible of a patient by 2 specialists. The surgeons had at least 1 year of experience using piezosurgery. The period from incision to complete splitting of the mandibular bone was recorded (ie, procedure duration). The intraoperative status (visibility and relocation) of the IAN also was recorded. The neurosensory function of the IAN was measured by the 2-point discrimination threshold and static light touch methods before surgery and postoperatively (1, 3, and 6 weeks and 6 and 12 months). Parameters were compared between the test groups by the paired t, nonparametric Wilcoxon, or χ 2 test. Intergroup comparison showed the mean duration of osteotomy was significantly shorter for group I (17 ± 6 vs 25 ± 9 minutes; P < .001). The rate of intraoperative exposures of the IAN was slightly lower for group I (68%) compared with group II (81%). However, the difference was not relevant. Neurosensory disturbance and recovery of the IAN did not differ between groups. Piezoelectric osteotomy requires considerably less time than conventional mechanical approaches, but shows no advantage in preventing neurosensory perturbation. Copyright © 2017 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.
Dexel, Julian; Fritzsche, Hagen; Beyer, Franziska; Harman, Melinda K; Lützner, Jörg
2017-03-01
Open-wedge high tibial osteotomy (HTO) is an established treatment for young and middle-aged patients with medial compartment knee osteoarthritis and varus malalignment. Although not intended, a lateral cortex fracture might occur during this procedure. Different fixation devices are available to repair such fractures. This study was performed to evaluate osteotomy healing after fixation with two different locking plates. Sixty-nine medial open-wedge HTO without bone grafting were followed until osteotomy healing. In patients with an intact lateral hinge, no problems were noted with either locking plate. A fracture of the lateral cortex occurred in 21 patients (30.4 %). In ten patients, the fracture was not recognized during surgery but was visible on the radiographs at the 6-week follow-up. Lateral cortex fracture resulted in non-union with the need for surgical treatment in three out of eight (37.5 %) patients using the newly introduced locking plate (Position HTO Maxi Plate), while this did not occur with a well-established locking plate (TomoFix) (0 out of 13, p = 0.023). With regard to other adverse events, no differences between both implants were observed. In cases of lateral cortex fracture, fixation with a smaller locking plate resulted in a relevant number of non-unions. Therefore, it is recommended that bone grafting, another fixation system, or an additional lateral fixation should be used in cases with lateral cortex fracture. III.
Chang, Po-Chun; Seol, Yang-Jo; Goldstein, Steven A.; Giannobile, William V.
2014-01-01
Purpose It is currently a challenge to determine the biomechanical properties of the hard tissue–dental implant interface. Recent advances in intraoral imaging and tomographic methods, such as microcomputed tomography (micro-CT), provide three-dimensional details, offering significant potential to evaluate the bone-implant interface, but yield limited information regarding osseointegration because of physical scattering effects emanating from metallic implant surfaces. In the present study, it was hypothesized that functional apparent moduli (FAM), generated from functional incorporation of the peri-implant structure, would eliminate the radiographic artifact–affected layer and serve as a feasible means to evaluate the biomechanical dynamics of tissue-implant integration in vivo. Materials and Methods Cylindric titanium mini-implants were placed in osteotomies and osteotomies with defects in rodent maxillae. The layers affected by radiographic artifacts were identified, and the pattern of tissue-implant integration was evaluated from histology and micro-CT images over a 21-day observation period. Analyses of structural information, FAM, and the relationship between FAM and interfacial stiffness (IS) were done before and after eliminating artifacts. Results Physical artifacts were present within a zone of about 100 to 150 μm around the implant in both experimental defect situations (osteotomy alone and osteotomy + defect). All correlations were evaluated before and after eliminating the artifact-affected layers, most notably during the maturation period of osseointegration. A strong correlation existed between functional bone apparent modulus and IS within 300 μm at the osteotomy defects (r > 0.9) and functional composite tissue apparent modulus in the osteotomy defects (r > 0.75). Conclusion Micro-CT imaging and FAM were of value in measuring the temporal process of tissue-implant integration in vivo. This approach will be useful to complement imaging technologies for longitudinal monitoring of osseointegration. PMID:23377049
Liu, Cheng-Yao; Li, Chuan-Dong; Wang, Liang; Ren, Shan; Yu, Fu-Bin; Li, Jin-Guang; Ma, Jiang-Xiong; Ma, Xing-Long
2018-05-01
Osteoarthritis (OA) is the third most common diagnosis made by general practitioners in older patients. The aim of this study was to compare the function scores of different surgeries in the treatment of knee osteoarthritis (KOA). Cohort studies about different surgical treatments for KOA were included with a comprehensive search in PubMed, Cochrane Library, and Embase. The standard mean difference (SMD) value was evaluated and the surface under the cumulative ranking (SUCRA) curve was drawn with a combination of direct and indirect evidence. A total of 265 eligible patients were enrolled and served as the nonoperative treatment group, osteotomy group, unicompartmental knee arthroplasty (UKA) group, total knee arthroplasty (TKA) group, and arthroscopic surgery group. Before surgery, 6 months after surgery, 1 year after surgery and 5 years after surgery, the hospital for special surgery (HSS) knee score, Lysholm score, Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) score, and American knee society score (KSS) were recorded. A total of 9 cohort studies including 954 patients with KOA were finally enrolled into the study. The network-meta analysis revealed that osteotomy and UKA treatments showed a better efficacy on improving the function score. Our cohort study further confirmed that, a higher HSS knee score after 1 year and higher Lysholm score after 6 months and 1 year were observed in the osteotomy and UKA groups, while better HSS knee score and KSS after 6 months and 1 year were showed in the osteotomy and TKA groups. In the TKA group, Lysholm score and KSS were higher and WOMAC score was lower after 5 years than other groups. WOMAC score was lowest in the UKA group after 6 months, 1 year and 5 years of surgery. These results provide evidence that function scores of patients with KOA were improved by osteotomy, UKA, TKA, and arthroscopic surgery. And osteotomy and UKA showed better short-term efficacy, while TKA appeared better long-term efficacy.
Opening-wedge high tibial osteotomy with a locked low-profile plate: surgical technique.
Kolb, Werner; Guhlmann, Hanno; Windisch, Christoph; Koller, Heiko; Grützner, Paul; Kolb, Klaus
2010-09-01
High tibial osteotomy has been recognized as a beneficial treatment for osteoarthritis of the medial compartment of the knee. The purpose of this prospective study was to assess the short-term results of opening-wedge high tibial osteotomies with locked plate fixation. From September 2002 to November 2005, fifty-one consecutive medial opening-wedge high tibial osteotomies were performed. The mean age of the patients at the time of the index operation was forty-nine years. The preoperative and postoperative factors analyzed included the grade of arthritis of the tibiofemoral compartment (the Ahlbäck radiographic grade), the anatomic tibiofemoral angle, patellar height, the Hospital for Special Surgery rating system score, and the Lysholm and Gillquist knee score. Postoperatively, one superficial wound infection occurred. Fifty of the fifty-one osteotomies healed after an average period of 12.9 weeks (range, eight to sixteen weeks) without bone grafts. A nonunion developed in a sixty-two-year-old patient who was a cigarette smoker. The average postoperative tibiofemoral angle was 9° of valgus. Forty-nine patients were followed for a mean of fifty-two months. The average score on the Hospital for Special Surgery rating system was 86 points at the time of the most recent follow-up. The rating was excellent in twenty-eight patients (57%), good in twelve (24%), fair in four (8%), and poor in five (10%). The average score on the Lysholm and Gillquist knee-scoring scale was 83 points. According to these scores, the outcome was excellent in nine patients (18%), good in thirty-one (63%), fair in three (6%), and poor in six (12%). Four knees failed after an average of thirty-six months. Our results suggest that an opening-wedge high tibial osteotomy with locked plate fixation allows a correct valgus angle to be achieved with good short-term results.
Kurz, Sascha; Pieroh, Philipp; Lenk, Maximilian; Josten, Christoph; Böhme, Jörg
2017-01-01
Abstract Rationale: Pelvic malunion is a rare complication and is technically challenging to correct owing to the complex three-dimensional (3D) geometry of the pelvic girdle. Hence, precise preoperative planning is required to ensure appropriate correction. Reconstructive surgery is generally a 2- or 3-stage procedure, with transiliac osteotomy serving as an alternative to address limb length discrepancy. Patient concerns: A 38-year-old female patient with a Mears type IV pelvic malunion with previous failed reconstructive surgery was admitted to our department due to progressive immobilization, increasing pain especially at the posterior pelvic arch and a leg length discrepancy. The leg discrepancy was approximately 4 cm and rotation of the right hip joint was associated with pain. Diagnosis: Radiography and computer tomography (CT) revealed a hypertrophic malunion at the site of the previous posterior osteotomy (Mears type IV) involving the anterior and middle column, according to the 3-column concept, as well as malunion of the left anterior arch (Mears type IV). Interventions: The surgery was planned virtually via 3D reconstruction, using the patient's CT, and subsequently performed via transiliac osteotomy and symphysiotomy. Finite element method (FEM) was used to plan the osteotomy and osteosynthesis as to include an estimation of the risk of implant failure. Outcomes: There was not incidence of neurological injury or infection, and the remaining leg length discrepancy was ≤ 2 cm. The patient recovered independent, pain free, mobility. Virtual 3D planning provided a more precise measurement of correction parameters than radiographic-based measurements. FEM analysis identified the highest risk for implant failure at the symphyseal plate osteosynthesis and the parasymphyseal screws. No implant failure was observed. Lessons: Transiliac osteotomy, with additional osteotomy or symphysiotomy, was a suitable surgical procedure for the correction of pelvic malunion and provided adequate correction of leg length discrepancy. Virtual 3D planning enabled precise determination of correction parameters, with FEM analysis providing an appropriate method to predict areas of implant failure. PMID:29049196
Farooq, Ghulam; Rehman, Lal; Bokhari, Irum; Rizvi, Syed Raza Hussain
2018-01-01
Background: The olfactory groove meningioma has always been surgically challenging. The common microscopic surgical procedures exercised involve modification of pterional or sub-frontal approaches with or without orbital osteotomies. However, we believe that orbital osteotomies are not mandatory to achieve gross total resection. Hence, this study was performed to evaluate the surgical outcomes of olfactory groove meningioma with bicoronal sub frontal approach but without orbital osteotomies. Materials and Methods: The study was performed by reviewing the medical charts, neuroimaging data, and follow-up data of 19 patients who were treated micro surgically for olfactory groove meningioma without orbital osteotomies in our department. Mean overall follow up period of our study was 5 years. Statistical analysis was done by means of IBM SPSS Software version 19. Results: Nineteen patients (1 male and 18 female patients, with an age range of 35-67 years; average age of patients' 51±7.5 years) of OGM were managed in our department. All patients were evaluated by MRI Brain with and without Gadolinium, CTA, CT Scan both axial and Coronal sequences. Most common symptom reported was head ache (80%), others include; urinary incontinence (26%), seizures (78%), decreased visual acuity (79%), papilledema (74%), personality changes (68%) and olfactory loss was reported in 57% of the patients. Post-operative complications include; CSF accumulation (5%), hematoma at tumor bed (10%), skin infection (5%) and mild post-operative brain edema (26%). Mortality rate was 5%. During 5 years of follow-up, we recorded one recurrence which was after 26 months and successfully removed in reoperation. Conclusion: Bi-coronal sub frontal approach appears to be an excellent technique for Olfactory Meningioma removal as practiced by most neurosurgeons. Nevertheless, it is not mandatory to carry out orbital osteotomy to acquire optimal surgical outcome as is advocated by some Authors. PMID:29682018
Şaylı, Uğur; Akman, Budak; Tanrıöver, Altuğ; Kaspar, Çiğdem; Güven, Melih; Özler, Turhan
2017-05-29
Intrinsically stable diaphyseal osteotomy gained popularity in recent years for symptomatic hallux valgus deformities. In this study, Scarf osteotomy results, in surgical management of moderate to severe hallux valgus, are presented. Study group consisted of 40 feet of 32 (28 females, four males) patients surgically managed by Scarf osteotomy between September 2009 and 2011, with a mean age of 52,98 (range, 31-75) years at the time of surgery. Patient satisfaction and VAS were used for subjective evaluation while for objective measures AOFAS score, first metatarsophalangeal joint ROM and radiological measurements (intermetatarsal, hallux valgus and distal metatarsal articular angles) were evaluated. Mean follow-up period was 38 (range, 24-60) months. Sixteen feet (40%) were reported as very satisfied, 19 (47,5%) as satisfied and the remaining five (12,5%) as unsatisfied resulting with a total of 35 (87,5%) satisfaction. The mean preoperative VAS and AOFAS forefoot scores improved from 8,13±0,791 to 2,68±1,228 (p=0,0001) and from 58,25±6,15 to 78,25±8,13 (p=0,0001) on the final follow-up, respectively. The postoperative change of first metatarsophalangeal joint ROM was not statistically significant (p=0,281). On the radiological evaluation; intermetatarsal and hallux valgus angles improved from a mean value of 14,77±1,76 to 8,13±1,52° (p=0,0001) and from 35,28±5,86 to 20,10±5,55° (p=0,0001), respectively. Distal metatarsal articular angle did not show any statistically significant change (p=0,195). Scarf osteotomy combined with distal soft tissue procedure is a technically demanding procedure. The osteotomy is intrinsically stable and the correction power is high and the results are mostly satisfactory. Copyright © 2017. Published by Elsevier Ltd.
Yang, Jae Hyuk; Suh, Seung Woo; Cho, Won Tae; Hwang, Jin Ho; Hong, Jae Young; Modi, Hitesh N
2014-10-15
Prospective case series study. To study the effect of posterior multilevel vertebral osteotomy (posterior crack osteotomy) on coronal and sagittal balance in patients with the fusion mass over the spine caused by previous surgery. Few studies have investigated revisional scoliosis surgery with the fusion mass using osteotomy. Among patients who had a history of prior surgery for scoliosis correction and posterior fusion, those showing progression of the curve postoperatively due to nonunion, implant failure, or adding-on phenomenon were enrolled. All patients were treated using posterior crack osteotomy. For clinical evaluation, the pre- and postoperative Gross Motor Function Classification System score for walking status and the Berg balanced scale were used. For radiological evaluation, pre- and postoperative Cobb angle, and coronal and sagittal balance factors were used. Ten patients (5 males and 5 females) were enrolled. The preoperative diagnosis was neuromuscular scoliosis (3 cases), syndromic scoliosis (1 case), congenital scoliosis (5 cases), and neurofibromatosis (1 case). Osteotomies were performed at 3.3±1.3 levels on average. Pre- and postoperative Cobb angles were 70.8°±30.0° and 28.1°±20.0° (P=0.002 (0.97)), respectively. In pre- and postoperative evaluation of coronal balance, the coronal balance, clavicle angle, and T1-tilt angle were 36.8±27.1 mm and 10.4±8.5 mm, 6.7°±8.0° and 3.3°±1.5°, and 7.8°±19.0° and 4.7°±2.1°, respectively (P=0.002, 0.002, 0.002). In pre- and postoperative evaluation of sagittal balance, the spinal vertical axis, thoracic kyphosis, and lumbar alignments were 25.1±37.8 mm and 14.1±21.8 mm, 33.5°±51.1° and 29.7°±27.4°, and 45.7°±34.8° and 48.9°±23.1° (P=0.002, 0.169, 0.169). The walking and functional statuses did not change (P=0.317, 0.932). Although pulmonary and gastrointestinal complications were noted, the patients were discharged without complications. Posterior crack osteotomy can be used effectively in revisional scoliosis surgery and the clinical and radiological results seem to be acceptable. 4.
Shen, Weimin; Cui, Jie; Chen, Jianbing; Ji, Yi; Kong, Liangliang
2017-05-01
To assess the utility of internal distraction osteogenesis with Piezosurgery oblique osteotomy of supraorbital margin of frontal bone for the treatment of unilateral coronal synostosis and to study the outcome and complications of this procedure. Oblique osteotomy allows for entry into the cranial cavity, and along with parallel cut to the roof of the orbit, avoids the need to cut into the orbit which forms the frontal flap. Oblique osteotomy was performed along the supraorbital rim to do a frontal suture of the glabella (ages of patients were less than 1 year) or on the opposite side of the supraorbital rim (ages of patients were older than 1 year) after performing a suturectomy of the effected coronal suture. Two internal distraction devices were subsequently placed across the osteotomized, fused coronal suture. Finally, the cranium pieces were divided in the middle and placed in the middle of the frontal bone using biological glue. Five days after the operation, a 0.6-mm distraction was done twice daily. The distraction was removed 6 months after reaching 2 to 3 cm. Internal distraction osteogenesis with supraorbital oblique osteotomy was performed in 9 patients suffering from unilateral coronal synostosis. Eight patients had no postoperative infections around the shaft puncture wounds. One patient had infection in the rods around the distraction during the period of fixed, but was cured with antibiotic treatment. During a mean follow-up period of 12 months (5-26 months), all patients were satisfied with the cosmetic and functional results. No complications, including fixed screw displacement, penetration of the cranium and dura mater or retraction of distraction devices, occurred. The devices were exposed in 1 patient, resulting in a postoperative scar. Despite these complications, the cranium was successfully expanded in all patients. Use of this procedure avoids the need for frontal osteotomy to move the orbit forward. Adding 2 cranium strips can be used to reconstruct the frontal nodule to make up for inadequacy of the frontal nodules highlighting to distract operation. Retracting a separated cranium is not easy after it has been fixed for 6 months. Thus, the management of unilateral coronal synostosis using internal distraction osteogenesis with supraorbital oblique osteotomy is safe and effective.
Zhang, Yu-Hang; Bi, Da-Wei; Chen, Yi-Min; Zu, Gang; Ma, Hai-Tao
2018-03-25
To explore clinical application of three-dimensional printing technology to design individual angle section on Chevron of hallux valgus osteotomy. From May 2013 to May 2016, 47 patients(66 feet) with mild to moderate hallux valgus treated by Chevron osteotomy according to different preoperative design were divided into computer osteotomy group(group A) and traditional osteotomy group(group B). In group A, there were 25 patients (33 feet), including 4 males(5 feet) and 21 females(28 feet) with an average age of (47.88±6.08) years old, average weight IMA was (13.58±1.15) degree, AOFAS score was 59.00±5.86, and treated individual 3D printing technology to design operation scheme. While in group B, there were 22 patients (33 feet), including 3 males (3 feet) and 19 females (28 feet) with an average age of (48.16±6.16) years old, average weight IMA was(13.51±1.14) degree, AOFAS score was 60.67±5.85, and treated with osteotomy according to surgical experience. Operation time, blood loss, hospital stays, VAS score at 1 week after operation, wound healing and improvement of postoperative weight-bearing intermetatarsal angle(IMA) were compared between two groups, AOFAS score system was used to evaluate ankle function after surgery. There was no significant difference in following-up between group A 12.41±2.32 and group B 11.73±2.76. There was 1 patient in group B were excluded. Others perform good wounds healing on the first stage after operation. There were no significant differences in operation time, blood loss, hospital stays and VAS score at 1 week after operation( P <0.05); IMA in group A was (5.21±0.88)°, (6.42±0.85)° in group B, and had significant differences between two groups ( t =5.68, P <0.05). There was obvious meaning in AOFAS score between group A 88.15±5.19 and group B 82.90±5.01( t =4.14, P <0.05). Fourteen feet in group A obtained excellent results and 19 feet good, while 5 feet in group B obtained excellent results and 27 feet good. Compared with traditional osteotomy group, three-dimensional printing technology to design individual angle section on Chevron of hallux valgus osteotomy could better correct IMA, improve postoperative foot function, and it is a kind of individualized and digital method to design operation. Copyright© 2018 by the China Journal of Orthopaedics and Traumatology Press.
Geometry of the Valgus Knee: Contradicting the Dogma of a Femoral-Based Deformity.
Eberbach, Helge; Mehl, Julian; Feucht, Matthias J; Bode, Gerrit; Südkamp, Norbert P; Niemeyer, Philipp
2017-03-01
Realignment osteotomies of valgus knee deformities are usually performed at the distal femur, as valgus alignment is considered to be a femoral-based deformity. This dogma, however, has not been proven in a large patient population. Valgus malalignment may also be caused by a tibial deformity or a combined tibial and femoral deformity. The purposes of this study were (1) to analyze the coronal geometry of patients with valgus malalignment and identify the location of the underlying deformity and (2) to investigate the proportion of cases that require realignment osteotomy at the tibia, the femur, or both locations to avoid an oblique joint line. Cross-sectional study; Level of evidence, 3. The analysis included 420 standing full-leg radiographs of patients with valgus malalignment (mechanical femorotibial angle [mFTA], ≥4°). A systematic analysis of the coronal leg geometry was performed including the mFTA, mechanical lateral distal femoral angle (mLDFA), mechanical medial proximal tibial angle (mMPTA), and joint-line convergence angle (JLCA). The localization of the deformity was determined according to the malalignment test described by Paley, and patients were assigned to 1 of 4 groups: femoral-based valgus deformity, tibial-based valgus deformity, femoral- and tibial-based valgus deformity, or intra-articular/ligamentary-based valgus deformity. Subsequently, the ideal osteotomy site was identified with the goal of a postoperative change of the joint line of two different maximum values, ±2° and ±4°, from its physiological varus position of 3°. Measurements of the coronal alignment revealed a mean (±SD) mFTA of 7.4° ± 4.3° (range, 4°-28.2°). The mean mLDFA and mean mMPTA were 84.8° ± 2.4° and 90.9° ± 2.6°, respectively. The mean JLCA was 1.2° ± 3.1°. The majority (41.0%) of valgus deformities were tibial based, 23.6% were femoral based, 26.9% were femoral and tibial based, and 8.6% were intra-articular/ligamentary based. To achieve a straight-leg axis and an anatomic postoperative joint line with a tolerance of ±4°, the ideal site of a corrective osteotomy was tibial in 55.2% of cases and femoral in 19.5% of cases. A double-level osteotomy would be necessary in 25.2% of cases. With a tolerance of ±2°, the ideal osteotomy site was the proximal tibia in 41.0% of cases and the distal femur in 13.6% of cases; a double-level osteotomy would be necessary in 45.5% of cases. In contrast to the widespread belief that valgus malalignment is usually caused by a femoral deformity, this study found that valgus malalignment was attributable to tibial deformity in the majority of patients. In addition, a combined femoral- and tibial-based deformity was more common than an isolated femoral-based deformity. As a clinical consequence, varus osteotomies to treat lateral compartment osteoarthritis must be performed at the tibial site or as a double-level osteotomy in a relevant number of patients to avoid an oblique joint line.
Edmondson, M C; Sherry, K R; Afolayan, J; Armitage, A R; Skyrme, A D
2011-03-01
Treatment for metatarsal head avascular necrosis is largely conservative. For severe or refractory cases there are various surgical options. We have performed a 'modified Weil's osteotomy' of the distal metatarsal in order to manage this problem. We present the largest case series, to our knowledge, with 17 such cases. The patients were scored pre- and post-operatively using the AOFAS Forefoot scoring system. We found that this procedure provided a mean score improvement of 36 points, with a complication rate of 5.9%. We would advocate this modified osteotomy as an effective, reliable and safe treatment option. Copyright © 2009 European Foot and Ankle Society. Published by Elsevier Ltd. All rights reserved.
A novel step osteotomy for correction of hemifacial microsomia - A case report.
Howlader, Debraj; Bhutia, Dichen P; Vignesh, U; Mehrotra, Divya
2016-01-01
Facial asymmetry is one of the commonest facial anomalies, with reported incidence as high as 34%. Hemifacial microsomia (HFM) has an incidence of 1 in every 4000-5600 children and is one of the commonest causes of facial asymmetry. The standard treatment of HFM is orthognathic surgery by bilateral saggital split osteotomy (BSSO) or distraction osteogenesis (DO) of the mandible, both of which involve prolonged periods of occlusal adjustments by an orthodontist. Here, we present distraction of the mandible by means of a novel modified step osteotomy to correct the facial asymmetry in a case of hemifacial microsomia without disturbing the occlusion. This novel technique can prove to be a new tool in the maxillofacial surgeons armamentarium to treat facial asymmetry.
Buckling Collapse of Midcervical Spine Secondary to Neurofibromatosis.
Shah, Kunal C; Gadia, Akshay; Nagad, Premik; Bhojraj, Shekhar; Nene, Abhay
2018-06-01
Buckling collapse is the term typically used to describe severe kyphosis >100 degrees, characteristically seen in thoracolumbar tuberculosis. Neurofibromatosis is rarely associated with severe cervical kyphosis. Dystrophic changes in vertebra make surgical correction and fusion challenging. Single-stage cervical osteotomies (e.g., pedicle subtraction osteotomy, vertebral column resection) are commonly done in cervicothoracic junction. However, it is technically challenging and associated with high risk of vertebral artery injury, neural injury, etc. when performed in higher cervical spine. Hence in our case we did a staged procedure performing circumferential osteotomy for buckling kyphosis in the midcervical spine. Because it involved midcervical spine and there was no chin-to-chest deformity, we preferred the anterior-posterior-anterior sequence. Copyright © 2018 Elsevier Inc. All rights reserved.
[Closing wedge osteotomy of the tibial head in treatment of single compartment arthrosis].
Jakob, R P; Jacobi, M
2004-02-01
Closing wedge high tibial osteotomy is an efficient method for the treatment of medial osteoarthritis of the knee. Prerequisites of successful surgery are proper indication and planning as well as the understanding of biomechanics and pathophysiology. The technique of osteotomy to choose (opening or closing wedge) depends on the type of malalignment and on additional pathologies. The surgical technique demands high precision to realize the planned correction and to avoid complications. Implants with angular stability provide advantages compared to traditional implants. Correct indication and surgical technique results in a desirable follow-up, which often lasts for at least 10 years. The effect on the prognosis of the young patient with cartilage damage is still unclear.
Packiaraj, I.; Retnakumar, K.; Anusuya, G. Sai; Rajambigai, M. Aarti; Baskaran, M.; Devadoss, Vimal Joseph
2016-01-01
Introduction: The greater palatine artery is one of the important feeding vessel to the maxilla. The surgeon should know the surgical anatomy of greater palatine artery to avoid trauma in maxilla which leads to ischemic problems. Aim: The CT evaluation of the distance between Pyriform aperture and the greater palatine foramen in various ages of both sexes. Result: The distance varies according to sex and age which are measured by CT and standardised. Discussion: The lateral nasal osteotomy can be done upto 25 mm depth, instead of 20 mm. Conclusion: By this study it shows that the lateral nasal wall osteotomy can be performed without injury to greater palatine artery. PMID:27829768
Altay, Mehmet Akif; Ertürk, Cemil; Altay, Nuray; Mercan, Ahmet Şükrü; Sipahioğlu, Serkan; Kalender, Ali Murat; Işıkan, Uğur Erdem
2016-07-01
The purpose of this study was to prospectively evaluate the clinical and radiographic outcomes, and complication rates, after a minimum of five years of follow-up after medial open wedge high tibial osteotomy (MOWHTO) using an Anthony-K plate. MOWHTO was performed on 35 knees of 34 consecutive patients. A visual analogue scale (VAS), and Western Ontario and McMaster University Osteoarthritis (WOMAC) and Lysholm scores, were used in clinical evaluation. Upon radiographic assessment, alignment was expressed as the femorotibial angle (FTA). The posterior tibial slope (PTS) and the Insall-Salvati Index (ISI) were also measured. VAS, WOMAC, and Lysholm scores improved significantly upon follow-up (p < 0.001 for all). The overall mean FTA was 4.68 ± 4.39° varus pre-operatively; at the last post-operative follow-up, the value was 8.43 ± 2.02° valgus. The mean correction angle was 13.1 ± 2.7°. A significant increase in PTS was evident (p < 0.01), as was a significant decrease in the ISI (p < 0.01). The overall complication rate was 8.6 %. The Anthony-K plate affords accurate correction, initially stabilises the osteotomy after surgery, and maintains such stability until the osteotomy gap is completely healed, without correction loss. The plate survival rate was 97.2 % after a minimum of five years of follow-up. The plate increased the PTS, as do other medial osteotomy fixation plates.
Möhlhenrich, Stephan Christian; Kniha, Kristian; Peters, Florian; Ayoub, Nassim; Goloborodko, Evgeny; Hölzle, Frank; Fritz, Ulrike; Modabber, Ali
2017-05-01
The aim of this study was to compare the fracture patterns after sagittal split osteotomy according to Obwegeser/Dal Pont (ODP) and Hunsuck/Epker (HE), as well as to investigate the relationship between lateral bone cut ending or angle and the incidence of unfavorable/bad splits. Postoperative cone-beam computed tomograms of 124 splits according to ODP and 60 according to HE were analyzed. ODP led to 75.8% and HE led to 60% lingual fractures with mandibular foramen contact. Horizontal fractures were found in 9.7% and 6.7%, respectively, and unfavorable/bad splits were found in 11.3% and 10%, respectively. The lateral osteotomy angle was 106.22° (SD 12.03)° for bad splits and 106.6° (SD 13.12)° for favorable splits. Correlations were found between favorable fracture patterns and split modifications and between buccal ending of the lateral bone cut and bad splits (p < 0.001). No relationship was observed between split modifications (p = 0.792) or the osteotomy angle (p = 0.937) and the incidence of unfavorable/bad splits. Split modifications had no influence on the incidence of unfavorable/bad splits, but the buccal ending of the lateral bone cut did have an influence. More lingual fractures with mandibular foramen contact are expected with the ODP modification. The osteotomy angle did not differ between favorable and bad splits. Copyright © 2017 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.
Trost, Matthias; Bredow, Jan; Boese, Christoph Kolja; Loweg, Lennard; Schulte, Tobias Ludger; Scaal, Martin; Eysel, Peer; Oppermann, Johannes
Distal chevron osteotomy is a common procedure for surgical correction of hallux valgus. Osteosynthesis with 1 screw or 2 Kirschner wires has been commonly used. We compared the stability of the 2 techniques in distal chevron osteotomy. Sixteen first metatarsals from fresh-frozen human cadaver feet (9 different cadaveric specimens) were used. A standardized distal chevron osteotomy was performed. One first metatarsal from each pair was assigned to group 1 (3.5-mm cortical screw; n = 8) and one to group 2 (two 1.6-mm Kirschner wires; n = 8). Using a materials testing machine, the head of the first metatarsals was loaded in 2 different configurations (cantilever and physiologic) in succession. In the cantilever configuration, the relative stiffness of the osteosynthesis compared with intact bone was 59% ± 27% in group 1 and 68% ± 18% in group 2 (p = .50). In the physiologic configuration, it was 38% ± 25% in group 1 and 35% ± 7% in group 2 (p = .75). The failure strength in the cantilever configuration was 187 ± 105 N in group 1 and 259 ± 71 N in group 2 (p = .21). No statistically significant differences were found in stability between the 2 techniques. The use of 1 screw or 2 Kirschner wires had no significant differences in their biomechanical loading capacity for osteosynthesis in distal chevron osteotomies for treatment of hallux valgus. Copyright © 2017 The American College of Foot and Ankle Surgeons. Published by Elsevier Inc. All rights reserved.
Outcomes of proximal chevron osteotomy for moderate versus severe hallux valgus deformities.
Moon, Jae-Young; Lee, Keun-Bae; Seon, Jong Keun; Moon, Eun-Sun; Jung, Sung-Taek
2012-08-01
Proximal chevron osteotomy with a distal soft tissue procedure has been widely used to treat moderate to severe hallux valgus deformities. However, there have been no studies comparing the results of proximal chevron osteotomy between patients with moderate and severe hallux valgus. We compared the results of this procedure among these groups. A retrospective review of 95 patients (108 feet) that underwent proximal chevron osteotomy and distal soft tissue procedure for moderate and severe hallux valgus was conducted. The 108 feet were divided into two groups: moderate hallux valgus (Group A) and severe hallux valgus (Group B). Group A was composed of 57 feet (52 patients) and Group B of 51 feet (43 patients). Average followup was 45 months. Mean American Orthopedic Foot and Ankle Society hallux metatarsophalangeal-interphalangeal scores were 54.1 points in Group A and 53.0 points in Group B preoperatively, and these improved to 90.8 and 92.6, respectively, at the last followup. Mean hallux valgus angles in Groups A and B reduced from 32.3 and 40.8 degrees, preoperatively to 10.7 and 13.2 degrees, postoperatively. Similarly, mean first intermetatarsal angles in Groups A and B reduced from 15.0 and 19.2 degrees, preoperatively to 9.0 and 9.2 degrees, postoperatively. The clinical and radiographic outcomes of proximal chevron osteotomy with a distal soft tissue procedure were found to be comparable for moderate and severe hallux valgus. Accordingly, our results suggest that this procedure provides an effective and reliable means of correcting hallux valgus regardless of severity of deformity.
Correlation of Postoperative Position of the Sesamoids After Chevron Osteotomy With Outcome.
Shi, Glenn G; Henning, Peter; Marks, Richard M
2016-03-01
Postoperative incomplete reduction of the sesamoids has been identified as a potential risk factor for hallux valgus recurrence after proximal osteotomy. However, it is not known whether the postoperative sesamoid position is a risk factor in hallux valgus correction via distal chevron osteotomy with or without dorsal webspace release (DWSR). In this retrospective study, 169 patients who underwent distal chevron osteotomy with or without DWSR were reviewed. Preoperative and postoperative (6 weeks, 6 months, 12 months) weightbearing radiographs were evaluated. Functional hallux valgus angle (HVA), intermetatarsal angle (IMA), and the position of the tibial sesamoid were graded using the center of head method. Seventy-six radiographs were available for review at the 12-month follow-up. Of these, 41 patients underwent DWSR procedure and 35 did not. In both groups, correction of all 3 parameters (HVA, IMA, tibial sesamoid position) were significant at the 12-month follow-up. Comparison of the postoperative results of the 2 groups showed no statistically significant differences. Four feet demonstrated displaced sesamoid position at the 12-month follow-up, with radiographic evidence of recurrence in just one. No significant relationship was found between postoperative sesamoid position and hallux valgus recurrence that occurred in 4 feet. Combining DWSR with a distal chevron osteotomy did not delay healing or increase risk of avascular necrosis, but it did not significantly improve angular measurements or sesamoid position. The concept that postoperative sesamoid position can be used to predict hallux valgus recurrence was not supported by our results when looking at distal chevron correction. Level III, retrospective comparative study. © The Author(s) 2015.
Franklin, Samuel P; Dover, Ryan K; Andrade, Natalia; Rosselli, Desiree; M Clarke, Kevin
2017-11-01
To describe oblique plane inclined osteotomies and report preliminary data on outcomes in dogs treated for antebrachial angulation-rotation deformities. Retrospective clinical study. Six antebrachii from 5 dogs. Records of dogs with antebrachial angulation-rotation deformities treated with oblique plane inclined osteotomies were reviewed. Postoperative frontal, sagittal, and transverse plane alignments were assessed subjectively, and alignment in the frontal and sagittal planes was quantified on radiographs. Outcomes were classified based on owner's and veterinarian's evaluation as full, acceptable, and unacceptable function. Complications were classified as minor, major, or catastrophic. Limb alignment was subjectively considered excellent in 1 case, good in 3 cases, and fair in 2 cases. Osseous union was achieved in all cases (mean 10.5 weeks; range, 6-13 weeks). Outcomes were assessed by the veterinarian as return to full function in 5 cases and acceptable function in 1 case at the final in-hospital follow-up (mean 44 weeks; range, 6-124 weeks). All owners classified their dogs as returning to full function at the final phone/email interview (mean 107 weeks; range, 72-153 weeks). Implants were removed due to infection or irritation in 3/6 limbs, while the other 3 limbs had minor dermatitis secondary to postoperative external coaptation. No catastrophic complications occurred. Oblique plane inclined osteotomies led to a successful outcome in all 6 limbs, but the technique can be challenging and does not always lead to optimal alignment. Future refinement of this technique could focus on the development of patient-specific osteotomy guides to improve accuracy and precision. © 2017 The American College of Veterinary Surgeons.
Minimally invasive (MIS) Tönnis osteotomy- A technical annotation and review of short term results.
Balakumar, Balasubramanian; Racy, Malek; Madan, Sanjeev
2018-03-01
We detail a modified single incision approach to perform the Tonnis triple pelvic osteotomy by a minimally invasive approach. 12 children underwent minimally invasive Tonnis Osteotomy. There were five boys and seven girls in this study group. Average age was 11 years (9-15 years) at the time of surgery. Mean follow-up was 20.5 months (13-39 months). The average preoperative Antero-Posterior (AP) Centre Edge (CE) angle was -8.8° (-38.6°-18°), the average post-operative AP CE angle was 29.7° (25.1°-43.7°). The average preoperative lateral CE angle was -4.7° (-16°-0°), the average postoperative Lateral CE angle was 28.5° (21.3°-37.4°). The Sharp's angle before and after surgery were 55.7° (51.3°-66°) and 32.4° (16.1°-40.1°) respectively. The mean Tönnis angle before and after the osteotomy were 28.86° (19.7°-43.4°) and 6.3° (0.5°-9.4°) respectively. There was one major complication with sciatic nerve palsy which is in the recovery phase on followup and six minor complications including two cases of transient lateral femoral cutaneous nerve injury, two cases of ischial non-union, over granulation of the wound in one case, and metalwork irritation in one case. We have described a minimally invasive Tonnis osteotomy as a viable option based on our results. This technique is recommended for those who are conversant with the traditional pelvicosteotomies.
Early experience with a novel nonmetallic cable in reconstructive hip surgery.
Ting, Nicholas T; Wera, Glenn D; Levine, Brett R; Della Valle, Craig J
2010-09-01
Metallic wires and cables are commonly used in primary and revision THA for fixation of periprosthetic fractures and osteotomies of the greater trochanter. These systems provide secure fixation and high healing rates but fraying, third-body generation, accelerated wear of the bearing surface, and injury to the surgical team remain concerning. We determined the rate of cable failure, union, and complications associated with a novel, nonmetallic cerclage cable in periprosthetic fracture and osteotomy fixation during THA. We retrospectively reviewed 29 patients who had primary and revision THAs using nonmetallic cables. Indications for use included fixation of an extended trochanteric osteotomy, intraoperative fracture of the proximal femur, strut allograft fixation, and a Vancouver B1 periprosthetic fracture of the femur. All patients were evaluated clinically and radiographically immediately postoperatively, at 3 weeks, 6 weeks, 3 months, and then annually thereafter. The minimum followup was 13 months (mean, 21 months; range, 13-30 months). Two of the 29 patients (7%) developed a nonunion; all remaining osteotomies, fractures and allografts had healed at the time of most recent evaluation. Four patients (14%) dislocated postoperatively; two were treated successfully with closed reduction, while the other two required reoperation. We identified no evidence of breakage or other complications directly attributable to the cables. The nonmetallic periprosthetic cables used in this series provided adequate fixation to allow for both osteotomy and fracture healing. We did not observe any complications directly related to the cables. Level of Evidence Level IV, therapeutic study. See Guidelines for Authors for a complete description of levels of evidence.
Wang, Tongyue; Han, Jeong Joon; Oh, Hee-Kyun; Park, Hong-Ju; Jung, Seunggon; Park, Yeong-Joon; Kook, Min-Suk
2016-07-01
This study aimed to identify risk factors associated with bad splits during sagittal split ramus osteotomy by using three-dimensional computed tomography. This study included 8 bad splits and 47 normal patients without bad splits. Mandibular anatomic parameters related to osteotomy line were measured. These included anteroposterior width of the ramus at level of lingula, distance between external oblique ridge and lingula, distance between sigmoid notch and inferior border of mandible, mandibular angle, distance between inferior outer surface of mandibular canal and inferior border of mandible under distal root of second molar (MCEM), buccolingual thickness of the ramus at level of lingula, and buccolingual thickness of the area just distal to first molar (BTM1) and second molar (BTM2). The incidence of bad splits in 625 sagittal split osteotomies was 1.28%. Compared with normal group, bad split group exhibited significantly thinner BTM2 and shorter sigmoid notch and inferior border of mandible (P <0.05). However, for BTM1 and buccolingual thickness of the ramus at level of lingula, there was no statistical difference between the 2 groups. Mandibular angle, anteroposterior width of the ramus at level of lingula, external oblique ridge and lingula, and MCEM were not significantly different between the groups. This study suggests that patients with shorter ramus and low thickness of the buccolingual alveolar region distal to the second molar had a higher risk of bad splits. These anatomic data may help surgeons to choose the safest surgical techniques and best osteotomy sites.
Impact of Open Reduction on Surgical Strategies for Missed Monteggia Fracture in Children.
Park, Hoon; Park, Kwang Won; Park, Kun Bo; Kim, Hyun Woo; Eom, Nam Kyu; Lee, Dong Hoon
2017-07-01
The aims of this study were to review our cases of missed Monteggia fracture treated by open reduction of the radial head with or without ulnar osteotomy and to investigate the indications for open reduction alone in surgical treatment of missed Monteggia fracture. We retrospectively reviewed 22 patients who presented with missed Monteggia fracture. The patients' mean age at the time of surgery was 7.6 years. The mean interval from injury to surgery was 16.1 months. The surgical procedure consisted of open reduction of the radiocapitellar joint followed by ulnar osteotomy without reconstruction of the annular ligament. The mean period of follow-up was 3.8 years. Radiographic assessment was performed for the maximum ulnar bow (MUB) and the location of the MUB. Clinical results were evaluated with the Mayo Elbow Performance Index and Kim's scores. Five patients underwent open reduction alone, and 17 patients underwent open reduction and ulnar osteotomy. When the MUB was less than 4 mm and the location of the MUB was in the distal 40% of the ulna, we could achieve reduction of the radial head without ulnar osteotomy. The radial head was maintained in a completely reduced position in 21 patients and was dislocated in one patient at final follow-up. Open reduction alone can be an attractive surgical option in select patients with missed Monteggia fracture with minimal bowing of the distal ulna. However, ulnar osteotomy should be considered in patients with a definite ulnar deformity. © Copyright: Yonsei University College of Medicine 2017
Stewart, Suzanne; Barr, Stephanie; Engiles, Julie; Hickok, Noreen J; Shapiro, Irving M; Richardson, Dean W; Parvizi, Javad; Schaer, Thomas P
2012-08-01
Implant-associated infections contribute to patient morbidity and health care costs. We hypothesized that surface modification of titanium fracture hardware with vancomycin would support bone-healing and prevent bacterial colonization of the implant in a large-animal model. A unilateral transverse mid-diaphyseal tibial osteotomy was performed and repaired with a titanium locking compression plate in nine sheep. Four control animals were treated with an unmodified plate and five experimental animals were treated with a vancomycin-modified plate. The osteotomy was inoculated with 2.5 × 106 colony-forming units of Staphylococcus aureus. The animals were killed at three months postoperatively, and implants were retrieved aseptically. Microbiologic and histologic analyses, scanning electron and confocal microscopy, and microcomputed tomography were performed. All animals completed the study. Compared with the treatment cohort, control animals exhibited protracted lameness in the operatively treated leg. Gross findings during necropsy were consistent with an infected osteotomy accompanied by a florid and lytic callus. Microcomputed tomography and histologic analysis of the tibiae further supported the presence of septic osteomyelitis in the control cohort. Thick biofilms were also evident, and bacterial cultures were positive for Staphylococcus aureus in three of four control animals. In contrast, animals treated with vancomycin-treated plates exhibited a healed osteotomy site with homogenous remodeling, there was no evidence of biofilm formation on the retrieved plate, and bacterial cultures from only one of five animals were positive for Staphylococcus aureus. Vancomycin-derivatized plate surfaces inhibited implant colonization with Staphylococcus aureus and supported bone-healing in an infected large-animal model.
Thumb in the plane of the hand: characterization and results of surgical treatment.
Langer, Jakub S; Manske, Paul R; Steffen, Jennifer A; Hu, Calvin; Goldfarb, Charles
2009-12-01
The purpose of this retrospective investigation is to characterize a congenital deformity, the thumb in the plane of the hand (TPH), and to evaluate the results of abduction-rotation osteotomy of the thumb metacarpal with thumb web space deepening (WSD). We performed a comprehensive analysis of the medical records, hand therapy notes, and radiographs to evaluate clinical features of the TPH deformity. We evaluated clinical and radiographic outcomes and incidence of deformity recurrence after abduction-rotation osteotomy and thumb WSD. Thirteen patients (7 girls and 6 boys) with 14 affected hands treated with an abduction-rotation osteotomy of the thumb metacarpal and formation of a deepened thumb-index web space met inclusion criteria. All TPH deformities were associated with other congenital conditions, including symbrachydactyly, syndactyly, central deficiency, and ulnar deficiency. During the course of treatment, patients had a mean of 4 surgeries per hand; 3 hands required osteotomy revision with or without revision WSD, and 6 additional hands required revision of thumb WSD alone. None of the affected hands were capable of thumb opposition to any finger before surgery, whereas after surgery, all 14 hands could actively perform key pinch, and 9 of the 14 hands could actively oppose the thumb to at least 1 finger. The TPH deformity occurs in association with other congenital abnormalities of the hand. An abduction-rotation osteotomy of the thumb metacarpal with thumb WSD can restore thumb opposition and improve function; nonetheless, multiple surgical procedures are often required, and thumb function may remain limited. Therapeutic IV.
A comparative investigation of bone surface after cutting with mechanical tools and Er:YAG laser.
Baek, Kyung-Won; Deibel, Waldemar; Marinov, Dilyan; Griessen, Mathias; Dard, Michel; Bruno, Alfredo; Zeilhofer, Hans-Florian; Cattin, Philippe; Juergens, Philipp
2015-07-01
Despite of the long history of medical application, laser ablation of bone tissue became successful only recently. Laser bone cutting is proven to have higher accuracy and to increase bone healing compared to conventional mechanical bone cutting. But the reason of subsequent better healing is not biologically explained yet. In this study we present our experience with an integrated miniaturized laser system mounted on a surgical lightweight robotic arm. An Erbium-doped Yttrium Aluminium Garnet (Er:YAG) laser and a piezoelectric (PZE) osteotome were used for comparison. In six grown up female Göttingen minipigs, comparative surgical interventions were done on the edentulous mandibular ridge. Our laser system was used to create different shapes of bone defects on the left side of the mandible. On the contralateral side, similar bone defects were created by PZE osteotome. Small bone samples were harvested to compare the immediate post-operative cut surface. The analysis of the cut surface of the laser osteotomy and conventional mechanical osteotomy revealed an essential difference. The scanning electron microscopy (SEM) analysis showed biologically open cut surfaces from the laser osteotomy. The samples from PZE osteotomy showed a flattened tissue structure over the cut surface, resembling the "smear layer" from tooth preparation. We concluded that our new finding with the mechanical osteotomy suggests a biological explanation to the expected difference in subsequent bone healing. Our hypothesis is that the difference of surface characteristic yields to different bleeding pattern and subsequently results in different bone healing. The analyses of bone healing will support our hypothesis. © 2015 Wiley Periodicals, Inc.
Saunders, Stuart M; Ellis, Scott J; Demetracopoulos, Constantine A; Marinescu, Anca; Burkett, Jayme; Deland, Jonathan T
2018-01-01
The forefoot abduction component of the flexible adult-acquired flatfoot can be addressed with lengthening of the anterior process of the calcaneus. We hypothesized that the step-cut lengthening calcaneal osteotomy (SLCO) would decrease the incidence of nonunion, lead to improvement in clinical outcome scores, and have a faster time to healing compared with the traditional Evans osteotomy. We retrospectively reviewed 111 patients (143 total feet: 65 Evans, 78 SLCO) undergoing stage IIB reconstruction followed clinically for at least 2 years. Preoperative and postoperative radiographs were analyzed for the amount of deformity correction. Computed tomography (CT) was used to analyze osteotomy healing. The Foot and Ankle Outcome Scores (FAOS) and lateral pain surveys were used to assess clinical outcomes. Mann-Whitney U tests were used to assess nonnormally distributed data while χ 2 and Fisher exact tests were used to analyze categorical variables (α = 0.05 significant). The Evans group used a larger graft size ( P < .001) and returned more often for hardware removal ( P = .038) than the SLCO group. SLCO union occurred at a mean of 8.77 weeks ( P < .001), which was significantly lower compared with the Evans group ( P = .02). The SLCO group also had fewer nonunions ( P = .016). FAOS scores improved equivalently between the 2 groups. Lateral column pain, ability to exercise, and ambulation distance were similar between groups. Following SLCO, patients had faster healing times and fewer nonunions, similar outcomes scores, and equivalent correction of deformity. SLCO is a viable technique for lateral column lengthening. Level III, retrospective cohort study.
Pape, Dietrich; Madry, Henning
2013-01-01
To develop a preclinical large animal model of high tibial osteotomy to study the effect of axial alignment on the lower extremity on specific issues of the knee joint, such as in articular cartilage repair, development of osteoarthritis and meniscal lesions. Preoperative planning, surgical procedure and postoperative care known from humans were adapted to develop a HTO model in the adult sheep. Thirty-five healthy, skeletally mature, female Merino sheep between 2 and 4 years of age underwent a HTO of their right tibia in a medial open-wedge technique inducing a normal (group 1) and an excessive valgus alignment (group 2) and a closed-wedge technique (group 3) inducing a varus alignment with the aim of elucidating the effect of limb alignment on cartilage repair in vivo. Animals were followed up for 6 months. Solid bone healing and maintenance of correction are most likely if the following surgical principles are respected: (1) medial and longitudinal approach to the proximal tibia; (2) biplanar osteotomy to increase initial rotatory stability regardless of the direction of correction; (3) small, narrow but long implant with locking screws; (4) posterior plate placement to avoid slope changes; (5) use of bicortical screws to account for the brittle bone of the tibial head and to avoid tibial head displacement. Although successful high tibial osteotomy in sheep is complex, the sheep may--because of its similarities with humans--serve as an elegant model to induce axial malalignment in a clinically relevant environment, and osteotomy healing under challenging mechanical conditions.
Gupta, Sameer; Kukreja, Sunil; Singh, Vivek
2014-04-01
To review the outcome of 60 patients who underwent valgus subtrochanteric osteotomy and its repositioning for un-united and neglected femoral neck fractures. 60 patients (mean age, 35 years) underwent valgus subtrochanteric osteotomy and repositioning of the osteotomy and fixation with a dynamic hip screw and a 135° single-angled barrel plate for closed un-united femoral neck fractures after failed internal fixation (n=27) or neglected (>3 weeks) fractures (n=33). The most common fracture type was transcervical (n=48), followed by subcapital (n=6) and basal (n=6). All patients had displaced femoral neck fractures (Garden types 3 and 4). According to the Pauwel angle, 45 fractures were type 2 (30º-70º) and 15 were type 3 (>70º). Patients were followed up for a mean of 3.5 (range, 2-7.5) years. The mean Pauwel angle of the fracture was corrected from 65° (range, 50°-89°) to 26° (range, 25°-28°). Bone union was achieved in 56 patients after a mean of 3.9 (range, 3-5.5) months. The mean Harris hip score improved from 65 to 87.5. Outcome was excellent in 30 patients, good in 24, and poor in 6. Four of the patients developed avascular necrosis; 2 of whom nonetheless achieved a good outcome. Valgus osteotomy and repositioning and fixation with a dynamic hip screw and a 135° single-angled barrel plate was effective treatment for un-united and neglected femoral neck fractures.
Ge, Jing; Yang, Chi; Zheng, Jia-Wei; He, Dong-Mei; Zheng, Ling-Yan; Hu, Ying-Kai
2014-11-01
Piezosurgery has been used widely in oral and maxillofacial surgery, but there has been no report systematically describing an osteotomy method with piezosurgery for complicated mandibular third molar removal. The aim of this study was to introduce 4 osteotomy methods using piezosurgery and evaluate their effects. A retrospective study was conducted of patients with a complicated impacted mandibular third molar requiring extraction. The predictor variable was the extraction technique. Four osteotomy methods using piezosurgery were tested according to different impaction types: method 1 involved complete bone removal; method 2 involved segmental bone removal; method 3 involved bone removal combined with tooth splitting; and method 4 involved block bone removal. Outcome variables were success rate, operative time, major complications (including nerve injury, mandible fracture, severe hematoma, or severe edema), and serious pyogenic infection. Data were analyzed using descriptive statistics. The study was composed of 55 patients with 74 complicated impacted mandibular third molars. All impacted mandibular third molars were removed successfully. The average surgical time was 15 minutes (range, 8 to 26 minutes). Thirty-eight molars (51.4%) were extracted by method 1, 18 molars (24.3%) by method 2, 12 molars (16.2%) by method 3, and 6 molars (8.1%) by method 4. Two cases (2.7%) developed postoperative infections and recovered within 1 week using drainage and antibiotic administration. The 4 osteotomy methods with piezosurgery provide effective ways of removing complicated impacted mandibular third molars. Copyright © 2014 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.
Scolozzi, Paolo; Herzog, Georges
2014-05-01
Although its pathogenesis remains obscure, Parry-Romberg syndrome (PRS) has been associated with the linear scleroderma en coup de sabre. PRS is characterized by unilateral facial atrophy of the skin, subcutaneous tissue, muscles, and bones with at least 1 dermatome supplied by the trigeminal nerve. Facial asymmetry represents the most common sequela and can involve the soft tissues, craniomaxillofacial skeleton, dentoalveolar area, and temporomandibular joint. Although orthognathic procedures have been reported for skeletal reconstruction, treatment of facial asymmetry has been directed to augmentation of the soft tissue volume on the atrophic side using different recontouring or volumetric augmentation techniques. Total mandibular subapical osteotomy has been used in the management of dentofacial deformities, such as open bite and mandibular dentoalveolar retrusion or protrusion associated with an imbalance between the lower lip and the chin. Management of orthognathic procedures has been improved by the recent introduction of stereolithographic surgical splints using computer-aided design (CAD) and computer-aided manufacturing (CAM) technology and piezosurgery. Piezosurgery has increased security during surgery, especially for delicate procedures associated with a high risk of nerve injury. The present report describes a combined total mandibular subapical osteotomy and Le Fort I osteotomy using piezosurgery and surgical splints fabricated using CAD and CAM for the correction of severe mouth asymmetry related to vertical dentoalveolar disharmony in a patient with PRS. Copyright © 2014 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.
ERIC Educational Resources Information Center
Pereira, Valerie J.; Sell, Debbie; Tuomainen, Jyrki
2013-01-01
Background: Abnormal facial growth is a well-known sequelae of cleft lip and palate (CLP) resulting in maxillary retrusion and a class III malocclusion. In 10-50% of cases, surgical correction involving advancement of the maxilla typically by osteotomy methods is required and normally undertaken in adolescence when facial growth is complete.…
Extraction of the Wichita Fusion Nail after Knee Arthrodesis.
Neuts, Ann-Sophie; Lammens, Johan; Stuyck, Jose
2016-01-01
To avoid a new exposition and partial damage of a knee arthrodesis site due to the removal of the Wichita fusion nail (WFN), a new extraction technique was developed, using a femoral osteotomy at the proximal end of the nail. Fixing the osteotomy with an Ilizarov frame offered the possibility to perform an additional correction of length and/or alignment if necessary.
Dobbe, J G G; du Pré, K J; Blankevoort, L; Streekstra, G J; Kloen, P
2017-08-01
The correction of multiplanar deformity is challenging. We describe preoperative 3-D planning and treatment of a complex tibia malunion using an oblique single-cut rotation osteotomy to correct deformity parameters in the sagittal, coronal and transverse plane. At 5 years postoperatively, the patient ambulates without pain with a well-aligned leg.
A rapid prototyping model for biomechanical evaluation of pelvic osteotomies.
Pressel, Thomas; Max, Stefan; Pfeifer, Roman; Ostermeier, Sven; Windhagen, Henning; Hurschler, Christof
2008-04-01
The biomechanical consequences of Salter pelvic osteotomy are difficult to assess due to the complex three-dimensional anatomy of the pelvis. Therefore, models of the dysplastic pelvis are required to allow realistic biomechanical simulation of possible outcomes. A polyamide reversed-engineering model of the left hemipelvis and proximal femur was produced from a computed tomography dataset of an 8-year-old child with severe dysplasia of both hips using selective laser sintering. Hip joint forces before and after Salter osteotomy of the hip were measured using an experimental setup in which an industrial robot was exerting hip joint forces and moments representing one-legged stance. Hip extensor and abductor actuator forces were measured which counterbalanced the joint moments. The preoperative hip joint resultant force was 583 N (270% body weight), while after the operation a mean force of 266 N (120% body weight) was measured. The resulting bony model was geometrically accurate, while apparent joint incongruencies were due to the neglected cartilaginous structures in the model. The preoperative joint resultant force was within the limits reported in the literature. The results suggest that Salter innominate osteotomy not only increases joint contact area but also reduces the hip joint force.
Li, Xigong; Sun, Junying; Lin, Xiangjin; Xu, Sanzhong; Tang, Tiansi
2013-06-01
The authors describe a modified double chevron subtrochanteric shortening osteotomy combined with cementless total hip arthroplasty for Crowe type-IV hip dysplasia. Shortening the femur allows to relax the shortened musculature. This operation was performed in 18 patients (22 hips) between January 2000 and February 2006. The mean follow-up period was 5.6 years (range: 3 to 8 years). The mean amount of femoral subtrochanteric shortening was 38 mm (range: 25 to 60 mm). The mean Harris hip score improved from 47 (range: 35 to 65) preoperatively to 88 points (range: 75 to 97) at final follow-up. The Trendelenburg sign was corrected from positive to negative in 12 of 22 hips. No acetabular or femoral components loosened or required revision during the follow-up period. All osteotomy sites healed in 3 to 6 months without complications. Cementless total hip arthroplasty using the modified double chevron subtrochanteric osteotomy provided good short- to midterm results in all 22 Crowe type-IV hip dislocations. Moreover, it restored the anatomic hip center and the limb length, which contributed to correction of the preoperative limp.
[The minimally invasive Chevron and Akin osteotomy (MICA)].
Altenberger, Sebastian; Kriegelstein, Stefanie; Gottschalk, Oliver; Dreyer, Florian; Mehlhorn, Alexander; Röser, Anke; Walther, Markus
2018-04-18
Percutaneous correction of a hallux valgus deformity with or without transfer metatarsalgia. Hallux valgus deformity up to 20° intermetatarsal angle, without instability of the first tarsometatarsal joint. Symptomatic arthritis of the first metatarsophalangeal joint, as well as instability of the first tarsometatarsal joint. Percutaneous performed osteotomy of the distal metatarsal 1 in combination with a medial closing wedge osteotomy of the proximal phalanx of the first toe. The use of a postoperative shoe with a rigid sole allows adapted weight bearing in the first 6 weeks. Active and passive mobilization can start immediately after surgery. The method is very effective to treat even severe deformities with or without metatarsalgia. The amount of correction is similar to open procedures. We recommend cadaver training to become familiar with this technique. Thus, complications such as nerve, vessel or tendon injuries can be avoided. The intraoperative radiation exposure remains significantly elevated even for experienced surgeons. In addition to the aesthetic benefits, there is less soft tissue traumatization compared to conventional open procedures. There is no need of bloodlessness. The minimally invasive Chevron and Akin osteotomy is a safe and powerful technique for the treatment of hallux valgus deformity.
Reliability of image-free navigation to monitor lower-limb alignment.
Pearle, Andrew D; Goleski, Patrick; Musahl, Volker; Kendoff, Daniel
2009-02-01
Proper alignment of the mechanical axis of the lower limb is the principal goal of a high tibial osteotomy. A well-accepted and relevant technical specification is the coronal plane lower-limb alignment. Target values for coronal plane alignment after high tibial osteotomy include 2 degrees of overcorrection, while tolerances for this specification have been established as 2 degrees to 4 degrees. However, the role of axial plane and sagittal plane realignment after high tibial osteotomy is poorly understood; consequently, targets and tolerance for this technical specification remain undefined. This article reviews the literature concerning the reliability and precision of navigation in monitoring the clinically relevant specification of lower-limb alignment in high tibial osteotomy. We conclude that image-free navigation registration may be clinically useful for intraoperative monitoring of the coronal plane only. Only fair and poor results for the axial and sagittal planes can be obtained by image-free navigation systems. In the future, combined image-based data, such as those from radiographs, magnetic resonance imaging, and gait analysis, may be used to help to improve the accuracy and reproducibility of quantitative intraoperative monitoring of lower-limb alignment.
Oblique metatarsal osteotomy for intractable plantar keratosis: 10-year follow-up.
Idusuyi, O B; Kitaoka, H B; Patzer, G L
1998-06-01
Twenty patients (14 women and 6 men) (23 feet) had a single oblique osteotomy operation of the 2nd, 3rd, or 4th metatarsal without fixation during an 8-year period. The mean age was 46 years (range, 21-64 years). Each patient had a painful intractable plantar keratosis preoperatively. The average follow-up was 10 years (range, 3-14 years). Postoperatively, reoperation was performed in four feet because of painful callosities. For 13 of the 19 feet that did not have reoperation, patients were limited in footwear or required a shoe insert. Overall results were good for 10 feet, fair for 7 feet, and poor for 6 feet. The only complication was a deep infection that occurred in one foot (good result). Nonunion occurred in one foot and delayed union in one. The average decrease in metatarsal length after osteotomy was 6+/-6 mm. The single oblique lesser metatarsal osteotomy may be successful, but one half of the patients continued to have some degree of pain and most patients had limitations in footwear. Overall results were disappointing, and patients who are offered this procedure should be advised of its limitations.
Kavin, Thangavelu; Jagadesan, Anbuselvan Gobichetty Palayam; Venkataraman, Siva Subramaniam
2012-01-01
Objectives: The aim of our study is to determine the changes in quality of life and patient′s perception of esthetic improvement after anterior maxillary osteotomy. Materials and Methods: Our prospective study consisted of 14 patients who had been diagnosed of skeletal orthodontic deformity and underwent anterior maxillary osteotomy, along with orthodontic correction. The quality of life was evaluated using questionnaires based on Oral Health Impact Profile-14 questionnaire (OHIP-14) and a 22-item orthognathic quality of life questionnaire. They were evaluated at baseline pre-surgical, 8 weeks postoperatively, and 24 weeks postoperatively. Results: Our results showed mild improvement in generic health related quality of life immediately following surgery, while condition-specific quality of life and patient′s perception of esthetic improvement were noted only at 24 weeks following anterior maxillary osteotomy. Conclusion: We conclude that anterior maxillary osteotomy had a positive impact on the quality of life. The improvement in patient's perception of esthetics is seen only 2 months after surgery, while improvements in oral health and function were seen within 2 months following surgery. The acceptance and satisfaction of patient toward surgery was more positive 2 months after surgery. PMID:23066273
The modified distal horizontal metatarsal osteotomy for correction of bunionette deformity.
Radl, Roman; Leithner, Andreas; Koehler, Wolfgang; Scheipl, Susanne; Windhager, Reinhard
2005-06-01
Bunionette is a common deformity for which a number of operative procedures have been described. The objective of this study was to evaluate the results of a modified distal horizontal metatarsal osteotomy in the correction of symptomatic bunionette. Metatarsal osteotomies were done in 21 feet in 14 patients (11 females, three males) with an average age of 44 (range 20 to 67) years at the time of operation. The average followup was 32 (range 12 to 52) months. The average Lesser Toe Metatarsophalangeal-Interphalangeal Score of the American Orthopaedic Foot and Ankle Society increased from 42 points (range 24 to 50) preoperatively to 87 points (range 60 to 100) at the last followup. The fifth metatarsophalangeal angle averaged 18 degrees (5 to 38 degrees) preoperatively and 5 degrees (-5 to 26 degrees) at final followup. The 4-5 intermetatarsal angle averaged 14 degrees (10 to 20 degrees) preoperatively and 9 degrees (5 to 12 degrees) at final followup. Hardware was removed from two feet and scheduled for a third foot because of symptomatic skin irritation. The modified distal horizontal metatarsal osteotomy is a stable and reliable method for correction of bunionette. Unsatisfactory results in our patients were related to prominent hardware.
Kinkpe, CV; Onimus, M; Sarr, L; Niane, MM; Traore, MM; Daffe, M; Gueye, AB
2017-01-01
Background: It has been observed that the correction of severe posttuberculous angular kyphosis is still a challenge, mainly because of the neurologic risk. Methods: Nine patients were reviewed after surgery (mean follow-up 18 months). There were 2 thoracic, 4 thoraco-lumbar and 3 lumbar kyphosis. The mean age at surgery was 23. Clinical results were evaluated by the Oswestry Disability Index (ODI) and by the neurologic evaluation. Preoperative, postoperative and final follow-up X-rays were assessed. The surgery included a posterior approach with cord release and correction by transpedicular wedge osteotomy and widening of the spinal canal. Results: Average kyphotic angulation was 72° before surgery, 10° after surgery and 12° at follow-up. Three out of four patients with neural deficit showed improvement. Neurologic complications included a transitory quadriceps paralysis, likely by foraminal compression of the root. Conclusion: A posterior transpedicular wedge osteotomy allows a substantial correction of the kyphosis, more by deflexion than by elongation, with limited neurologic risks. However it is mandatory to widely enlarge the spinal canal on the levels adjacent to the osteotomy, in order to allow the dura to expand backwards. PMID:28567156
Seo, Yu-Jin; Lin, Lu; Kim, Seong-Hun; Chung, Kyu-Rhim; Nelson, Gerald
2016-01-01
This case report presents the camouflage treatment that successfully improved the facial profile of a patient with a skeletal Class III malocclusion using bone-borne rapid maxillary expansion and mandibular anterior subapical osteotomy. The patient was an 18-year-old woman with chief complaints of crooked teeth and a protruded jaw. Camouflage treatment was chosen because she rejected orthognathic surgery under general anesthesia. A hybrid type of bone-borne rapid maxillary expander with palatal mini-implants was used to correct the transverse discrepancy, and a mandibular anterior subapical osteotomy was conducted to achieve proper overjet with normal incisal inclination and to improve her lip and chin profile. As a result, a Class I occlusion with a favorable inclination of the anterior teeth and a good esthetic profile was achieved with no adverse effects. Therefore, the hybrid type of bone-borne rapid maxillary expander and a mandibular anterior subapical osteotomy can be considered effective camouflage treatment of a skeletal Class III malocclusion, providing improved inclination of the dentition and lip profile. Copyright © 2016 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.
Stübinger, Stefan; Saldamli, Belma; Seitz, Oliver; Sader, Robert; Landes, Constantin A
2009-05-01
The goal of this study was to compare the surgical advantages and disadvantages of a new palatal access osteotomy for sinus elevation with a conventional lateral approach. In 32 patients, either a palatal (n = 16) or a lateral (n = 16) osteotomy to the maxillary sinus was performed under local anesthesia. The palatal access included a circular paramarginal incision and elevation of a palatal mucosal flap based on a median pedicle. The lateral access was performed by vestibular standard incision and development of a mucoperiosteal flap with a vestibular and superior basis. For all osteotomies a piezoelectric device was used. The sinus cavity was augmented with synthetic nanostructured hydroxyapatite graft material. Intraoperative complications during both procedures were minimal and wound healing was uneventful. Membrane perforation occurred in 19% of the palatal group and in 19% of the lateral group. Soft tissue management of the palatal technique was superior to that of the lateral approach, because the vestibular anatomy was not altered and consequently no disharmonious soft tissue scarring and no postoperative swelling occurred. The palatal approach permitted higher postoperative comfort, especially for edentulous patients, because full dentures could be incorporated directly after surgery with almost perfect fit.
Didomenico, Lawrence; Stein, Dawn Y; Wargo-Dorsey, Mari
2011-01-01
A retrospective study of patients who underwent gastrocnemius recession, double calcaneal osteotomy (Evans osteotomy and percutaneous calcaneal displacement osteotomy), and medial column fusion for the treatment of posterior tibial tendon dysfunction was conducted. The senior author performed the procedures between November 2002 and January 2009 on 34 patients who displayed at least Johnson and Strom stage II deformity and had undergone 12 months of failed conservative treatment. The coauthors evaluated the patients' radiographs before and after the operation. At a mean of 14 (range 3 to 44) months after surgery, radiographic measurements demonstrated statistically significant changes in the structural alignment of the feet. Based on our experience with these patients, we believe that a double calcaneal osteotomy combined with a gastrocnemius recession and stabilization of the medial column for the treatment of posterior tibial tendon dysfunction provides satisfactory correction, stability, and realignment of the foot. Furthermore, we feel that the use of flexor digitorum longus transfer, as well as triple arthrodesis, can be avoided without compromising the outcome when surgically treating posterior tibial tendon dysfunction. Copyright © 2011 American College of Foot and Ankle Surgeons. Published by Elsevier Inc. All rights reserved.
Osteotomy models - the current status on pain scoring and management in small rodents.
Lang, Annemarie; Schulz, Anja; Ellinghaus, Agnes; Schmidt-Bleek, Katharina
2016-12-01
Fracture healing is a complex regeneration process which produces new bone tissue without scar formation. However, fracture healing disorders occur in approximately 10% of human patients and cause severe pain and reduced quality of life. Recently, the development of more standardized, sophisticated and commercially available osteosynthesis techniques reflecting clinical approaches has increased the use of small rodents such as rats and mice in bone healing research dramatically. Nevertheless, there is no standard for pain assessment, especially in these species, and consequently limited information regarding the welfare aspects of osteotomy models. Moreover, the selection of analgesics is restricted for osteotomy models since non-steroidal anti-inflammatory drugs (NSAIDs) are known to affect the initial, inflammatory phase of bone healing. Therefore, opioids such as buprenorphine and tramadol are often used. However, dosage data in the literature are varied. Within this review, we clarify the background of osteotomy models, explain the current status and challenges of animal welfare assessment, and provide an example score sheet including model specific parameters. Furthermore, we summarize current refinement options and present a brief outlook on further 3R research. © The Author(s) 2016.
WITHDRAWN: Interventions for treating hallux valgus (abductovalgus) and bunions.
Ferrari, Jill; Higgins, Julian Pt; Prior, Trevor D
2009-04-15
Hallux valgus is classified as an abnormal deviation of the great toe (hallux) towards the midline of the foot. To identify and evaluate the evidence from randomised trials of interventions used to correct hallux valgus. We searched the Cochrane Bone, Joint and Muscle Trauama Group trials register (2003/1), the Cochrane Central Register of Controlled Trials (The Cochrane Library issue 1, 2003), MEDLINE (January 1966 to March 2003) and EMBASE (1980 to January 2003). No language restrictions were applied. Hand searching of specific foot journals was also undertaken.Date of the most recent search: 31st March 2003. Randomised or quasi-randomised trials of both conservative and surgical treatments of hallux valgus. Excluded were studies comparing areas of surgery not specific to the control of the deformity such as use of anaesthetics or tourniquet placement. Methodological quality of trials which met the inclusion criteria was independently assessed by two reviewers. Data extraction was undertaken by two reviewers. The trials were grouped according to the interventions being compared, but the dissimilarity in the comparisons prevented pooling of results. The methodological quality of the 21 included trials was generally poor and trial sizes were small.Three trials involving 332 participants evaluated conservative treatments versus no treatment. There was no evidence of a difference in outcomes between treatment and no treatment.One good quality trial involving 140 participants compared surgery to conservative treatment. Evidence was shown of an improvement in all outcomes in patients receiving chevron osteotomy compared with those receiving orthoses. The same trial also compared surgery to no treatment in 140 participants. Evidence was shown of an improvement in all outcomes in patients receiving chevron osteotomy compared with those receiving no treatment.Two trials involving 133 people with hallux valgus compared Keller's arthroplasty with other surgical techniques. In general, there was no advantage or disadvantage using Keller's over the other techniques. When the distal osteotomy was compared to Keller's arthroplasty, the osteotomy showed evidence of improving the intermetatarsal angle and preserving joint range of motion. The arthroplasty was found to have less of an impact on walking ability compared to the arthrodesis.Six trials involving 309 participants compared chevron (and chevron-type) osteotomy with other techniques. The chevron osteotomy offered no advantages in these trials. For some outcomes, other techniques gave better results. Two of these trials (94 participants) compared a type of proximal osteotomy to a proximal chevron osteotomy and found no evidence of a difference in outcomes between techniques.Three trials involving 157 participants compared outcomes between original operations and surgeon's adaptations. There was no advantage found for any of the adaptations.Three trials involving 71 people with hallux valgus compared new methods of fixation to traditional methods. There was no evidence that the new methods of fixation were detrimental to the outcome of the patients.Four trials involving 162 participants evaluated methods of post-operative rehabilitation. The use of continuous passive motion appeared to give an improved range of motion and earlier recovery following surgery. Early weightbearing or the use of a crepe bandage were not found to be detrimental to final outcome. Only a few studies had considered conservative treatments. The evidence from these suggested that orthoses and night splints did not appear to be any more beneficial in improving outcomes than no treatment. Surgery (chevron osteotomy) was shown to be beneficial compared to orthoses or no treatment, but when compared to other osteotomies, no technique was shown to be superior to any other. Only one trial had compared an osteotomy to an arthroplasty. There was limited evidence to suggest that the osteotomy gave the better outcomes. It was notable that the numbers of participants in some trials remaining dissatisfied at follow-up were consistently high (25 to 33%), even when the hallux valgus angle and pain had improved. A few of the more recent trials used assessment scores that combine several aspects of the patients outcomes. These scoring systems are useful to the clinician when comparing techniques but are of dubious relevance to the patient if they do not address their main concern and such scoring systems are frequently unvalidated. Only one study simply asked the patient if they were better than before the treatment. Final outcomes were most frequently measured at one year, with a few trials maintaining follow-up for 3 years. Such time-scales are minimal given that the patients will be on their feet for at least another 20-30 years after treatment. Future research should include patient-focused outcomes, standardised assessment criteria and longer surveillance periods, more usefully in the region of 5-10 years.
Atwood, Chase; Maxwell, Mac; Butler, Ryan; Wills, Robert
2015-01-01
The goal of this study was to retrospectively investigate the effect of incisional closure with either stainless steel skin staples or intradermal poliglecaprone 25 on the prevalence of surgical site infection following tibial plateau leveling osteotomy in dogs. Medical records were reviewed for dogs treated with unilateral tibial plateau leveling osteotomy at Memphis Veterinary Specialists between 2006 and 2013. Procedures (n = 306) from 242 dogs were included in the study. The association of potential risk factors with the occurrence of postoperative infection was assessed using logistic regression. A value of P < 0.05 was considered significant. Weight and administration of postoperative antimicrobials were found to significantly influence surgical site infection prevalence. No significant association was noted between closure method and prevalence of postoperative infection. PMID:25829557
Kang, Da-Young; Choi, Sung-Hwan; Jung, Young-Soo; Hwang, Chung-Ju
2015-05-01
This case report describes the beneficial effects of the interdisciplinary treatment of an adult patient with severe skeletal periodontal problems. A 30-year-old female patient presented with anterior open bite, gummy smile, and facial asymmetry. The patient had chronic generalized severe periodontitis with pathologic maxillary anterior teeth migration and mild intellectual disability. Treatment included 6 months of periodontal treatment, followed by presurgical orthodontic treatment, a Le Fort I osteotomy with anterior segmental osteotomy, a bilateral sagittal split ramus osteotomy, and postsurgical orthodontic treatment. After treatment completion, the patient exhibited functional and aesthetic improvements. Her periodontal condition improved and was maintained after the treatment. Here, we demonstrate a successful treatment outcome in a complicated case following a systematic interdisciplinary approach performed with the correct diagnosis and treatment planning.
Hara, Shingo; Mitsugi, Masaharu; Kanno, Takahiro; Nomachi, Akihiko; Wajima, Takehiko; Tatemoto, Yukihiro
2013-09-01
This article describes a case we experienced in which good postsurgical facial profiles were obtained for a patient with jaw deformities associated with facial asymmetry, by implementing surgical planning with SimPlant OMS. Using this method, we conducted LF1 osteotomy, intraoral vertical ramus osteotomy (IVRO), sagittal split ramus osteotomy (SSRO), mandibular constriction and mandibular border genioplasty. Not only did we obtain a class I occlusal relationship, but the complicated surgery also improved the asymmetry of the frontal view, as well as of the profile view, of the patient. The virtual operation using three-dimensional computed tomography (3D-CT) could be especially useful for the treatment of patients with jaw deformities associated with facial asymmetry.
Hara, Shingo; Mitsugi, Masaharu; Kanno, Takahiro; Nomachi, Akihiko; Wajima, Takehiko; Tatemoto, Yukihiro
2013-01-01
This article describes a case we experienced in which good postsurgical facial profiles were obtained for a patient with jaw deformities associated with facial asymmetry, by implementing surgical planning with SimPlant OMS. Using this method, we conducted LF1 osteotomy, intraoral vertical ramus osteotomy (IVRO), sagittal split ramus osteotomy (SSRO), mandibular constriction and mandibular border genioplasty. Not only did we obtain a class I occlusal relationship, but the complicated surgery also improved the asymmetry of the frontal view, as well as of the profile view, of the patient. The virtual operation using three-dimensional computed tomography (3D-CT) could be especially useful for the treatment of patients with jaw deformities associated with facial asymmetry. PMID:23907678
Tang, Xiao-Bo; Dong, Pei-Long; Wang, Jian
2014-04-01
To compare therapeutic effects between patella replacement and patella osteotomy in total knee arthroplasty. From April 2004 to April 2011, 52 patients (54 knees) were enrolled in the clinical trail of total knee arthroplasty, who received patella replacement (24 knees, including 13 males and 11 females,ranging in age from 53 to 78 years old or patella osteotomy (30 knees,including 16 males and 12 females,ranging in age from 55 to 79 years old. The average follow-up period was 56 months,ranging from 20 to 80 months. The American HSS Score for knee, the Feller score for patella, range of motion (ROM) for knee, patient satisfaction and complications related to the patella were used to evaluate therapeutic effects. In the patella replacement group,the preoperative and final follow-up HSS scores of patients were 38.4 +/- 8.2 and 91.2 +/- 8.6 respectively; Feller scores were 13.6 +/- 6.2 and 25.2 +/- 4.2; scores of anterior knee pain were 3.9 +/- 3.2 and 11.2 +/- 3.7; ROM were (78 +/- 26) degrees and(108 +/- 18) degrees. In the patella osteotomy group,the preoperative and final follow-up HSS scores of patients were 39.5 +/- 8.4 and 91.0 +/- 8.5 respectively;Feller scores were 13.4 +/- 6.5 and 25.6 +/- 4.0; scores of anterior knee pain were 3.7 +/- 3.1 and 11.3 +/- 3.6; ROM were (76 +/- 27) degrees and (110 +/- 19) degrees. In the patella replacement group,patient's satisfaction was 91%, and complication related to the patella was 16.7%; in the patella osteotomy group, patient's satisfaction was 89%, and complications related to the patella was 10.0%. There were no statistically significant differeneces in final follow-up HSS scores, Feller scores, scores of anterior knee pain and ROM between the two groups. However,there was no significant difference of patient's satisfaction between them. There was statistically significant differenece of patella-related complications between the two groups, and the complication rate in the patella replacement group was higher than that in the patella osteotomy group. Total knee arthroplasty with patella replacement or patella osteotomy dramatically relieves pain and improves the knee function. Patella-related complications are associated with its treatment methods, but post-operative anterior knee pain and patient's satisfaction are not related to treatment methods of the patella.
Use of an ultrasonic osteotome device in spine surgery: experience from the first 128 patients.
Hu, Xiaobang; Ohnmeiss, Donna D; Lieberman, Isador H
2013-12-01
The ultrasonic BoneScalpel is a tissue-specific device that allows the surgeon to make precise osteotomies while protecting collateral or adjacent soft tissue structures. The device is comprised of a blunt ultrasonic blade that oscillates at over 22,500 cycles/s with an imperceptible microscopic amplitude. The recurring impacts pulverize the noncompliant crystalline structure resulting in a precise cut. The more compliant adjacent soft tissue is not affected by the ultrasonic oscillation. The purpose of this study is to report the experience and safety of using this ultrasonic osteotome device in a variety of spine surgeries. Data were retrospectively collected from medical charts and surgical reports for each surgery in which the ultrasonic scalpel was used to perform any type of osteotomy (facetectomy, laminotomy, laminectomy, en bloc resection, Smith Petersen osteotomy, pedicle subtraction osteotomy, etc.). The majority of patients had spinal stenosis, degenerative or adolescent scoliosis, pseudoarthrosis, adjacent segment degeneration, and spondylolisthesis et al. Intra-operative complications were also recorded. A total of 128 consecutive patients (73 female, 55 male) beginning with our first case experience were included in this study. The mean age of the patients was 58 years (range 12-85 years). Eighty patients (62.5 %) had previous spine surgery and/or spinal deformity. The ultrasonic scalpel was used at all levels of the spine and the average levels operated on each patient were 5. The mean operation time (skin to skin) was 4.3 h and the mean blood loss was 425.4 ml. In all cases, the ultrasonic scalpel was used to create the needed osteotomies to facilitate the surgical procedure without any percussion on the spinal column or injury to the underlying nerves. There was a noticeable absence of bleeding from the cut end of the bone consistent with the ultrasonic application. There were 11 instances of dural injuries (8.6 %) and two of which were directly associated with the use of ultrasonic device. In no procedure was the use of the ultrasonic scalpel abandoned for use of another instrument due to difficulty in using the device or failure to achieve the desired osteotomy. Overall, the ultrasonic scalpel was safe and performed as desired when used as a bone cutting device to facilitate osteotomies in a variety of spine surgeries. However, caution should be taken to avoid potential thermal injury and dural tear. If used properly, this device may decrease the risk of soft tissue injury associated with the use of high speed burrs and oscillating saws during spine surgery.
Extraction of the Wichita Fusion Nail after Knee Arthrodesis
Neuts, Ann-Sophie; Lammens, Johan; Stuyck, Jose
2016-01-01
To avoid a new exposition and partial damage of a knee arthrodesis site due to the removal of the Wichita fusion nail (WFN), a new extraction technique was developed, using a femoral osteotomy at the proximal end of the nail. Fixing the osteotomy with an Ilizarov frame offered the possibility to perform an additional correction of length and/or alignment if necessary. PMID:28529847
Choi, Gi Won; Kim, Hak Jun; Kim, Taik Seon; Chun, Sung Kwang; Kim, Tae Wan; Lee, Yong In; Kim, Kyoung Ho
2016-01-01
Distal metatarsal osteotomy and the modified McBride procedure have each been used for the treatment of mild to moderate hallux valgus. However, few studies have compared the results of these 2 procedures for mild to moderate hallux valgus. The purpose of the present study was to compare the results of distal chevron osteotomy and the modified McBride procedure for treatment of mild to moderate hallux valgus according to the severity of the deformity. We analyzed the data from 45 patients (49.5%; 48 feet [49.0%]), who had undergone an isolated modified McBride procedure (McBride group), and 46 patients (50.5%; 50 feet [51.0%]), who had a distal chevron osteotomy (chevron group). We subdivided each group into those with mild and moderate deformity and compared the clinical and radiologic outcomes between the groups in relation to the severity of the deformity. The improvements in the American Orthopaedic Foot and Ankle Society scale score and the visual analog scale for pain were significantly better for the chevron group for both mild and moderate deformity. The chevron group experienced significantly greater correction in the hallux valgus angle and intermetatarsal angle for both mild and moderate deformity. The chevron group experienced a significantly greater decrease in the grade of sesamoid displacement for patients with moderate deformity. The McBride group had a greater risk of recurrence than did the chevron group for moderate deformity (odds ratio 14.00, 95% confidence interval 3.91 to 50.06, p < .001). The results of the present study have demonstrated the superiority of the distal chevron osteotomy over the modified McBride procedure for mild to moderate deformity. For patients with moderate deformity, the McBride group had a greater risk of hallux valgus recurrence than did the distal chevron group. Therefore, we recommend distal chevron osteotomy rather than a modified McBride procedure for the treatment of mild and moderate hallux valgus. Copyright © 2016 American College of Foot and Ankle Surgeons. Published by Elsevier Inc. All rights reserved.
Torsional osteotomies of the tibia in patellofemoral dysbalance.
Dickschas, Jörg; Tassika, Aliki; Lutter, Christoph; Harrer, Jörg; Strecker, Wolf
2017-02-01
Anterior knee pain or patellofemoral instability is common symptom of patellofemoral dysbalance or maltracking. Tibial torsional deformities can be the reason of this pathology. After appropriate diagnostic investigation, the treatment of choice is a torsional osteotomy. This study addresses the diagnostic investigation, treatment, and the outcome of torsional osteotomies of the tibia. Does this treatment result in patellofemoral stability and provide pain relief? Forty-nine tibial torsional osteotomies were included. The major symptoms were patellofemoral instability in 19 cases and anterior knee pain in 42 cases. In addition to clinical and radiographic analysis, a torsional angle CT scan was performed pre-operatively. A visual analog scale (VAS), the Japanese Knee Society score, the Tegner activity score, and the Lysholm score were assessed pre-operatively and at the 42-month follow-up. Mean tibial external torsion was 47.4° (SD 5.41; range 37°-66°; standard value 34°). Surgical treatment consisted of an acute supratuberositary tibial internal torsional osteotomy (mean 10.8°; SD 3.01°; range 5°-18°). At the follow-up investigation, the Tegner activity score was increased 0.4 points (p value 0.014) from 3.9 (SD 1.33; range 2-7) to 4.3 (SD 1.25; range 0-7). The Lysholm score increased 26 points (SD 16.32; p value 0.001) from 66 (SD 14.94; range 32-94) to 92 (SD 9.29; range 70-100) and the Japanese Knee Society score increased 18 points (SD 14.70; p value 0.001) from 72 (SD 13.72, range 49-100) to 90 (SD 9.85, range 60-100). VAS was reduced 3.4 points (SD 2.89; p value 0.001) from 5.7 (SD 2.78; range 0-10) to 2.3 (SD 1.83; range 0-7). As regards patellofemoral instability, no redislocation occurred in the follow-up period. The results of this study show that in cases of tibial maltorsion, a torsional osteotomy can lead to patellofemoral stability and pain relief, and should be considered as a treatment option. The improved clinical scores in the present investigation show the value of the procedure. Level of evidence Level IV.
Comparison of fixed-bearing and mobile-bearing total knee arthroplasty after high tibial osteotomy.
Hernigou, Philippe; Huys, Maxime; Pariat, Jacques; Roubineau, François; Flouzat Lachaniette, Charles Henri; Dubory, Arnaud
2018-02-01
There is no information comparing the results of fixed-bearing total knee replacement and mobile-bearing total knee replacement in the same patients previously treated by high tibial osteotomy. The purpose was therefore to compare fixed-bearing and mobile-bearing total knee replacements in patients treated with previous high tibial osteotomy. We compared the results of 57 patients with osteoarthritis who had received a fixed-bearing prosthesis after high tibial osteotomy with the results of 41 matched patients who had received a rotating platform after high tibial osteotomy. The match was made for length of follow-up period. The mean follow-up was 17 years (range, 15-20 years). The patients were assessed clinically and radiographically. The pre-operative knee scores had no statistically significant differences between the two groups. So was the case with the intra-operative releases, blood loss, thromboembolic complications and infection rates in either group. There was significant improvement in both groups of knees, and no significant difference was observed between the groups (i.e., fixed-bearing and mobile-bearing knees) for the mean Knee Society knee clinical score (95 and 92 points, respectively), or the Knee Society knee functional score (82 and 83 points, respectively) at the latest follow-up. However, the mean post-operative knee motion was higher for the fixed-bearing group (117° versus 110°). In the fixed-bearing group, one knee was revised because of periprosthetic fracture. In the rotating platform mobile-bearing group, one knee was revised because of aseptic loosening of the tibial component. The Kaplan-Meier survivorship for revision at ten years of follow-up was 95.2% for the fixed bearing prosthesis and 91.1% for the rotating platform mobile-bearing prosthesis. Although we did manage to detect significant differences mainly in clinical and radiographic results between the two groups, we found no superiority or inferiority of the mobile-bearing total knee prosthesis over the fixed-bearing total knee prosthesis for patients previously operated by high tibial osteotomy.
In vivo assessment of bone healing following Piezotome® ultrasonic instrumentation.
Reside, Jonathan; Everett, Eric; Padilla, Ricardo; Arce, Roger; Miguez, Patricia; Brodala, Nadine; De Kok, Ingeborg; Nares, Salvador
2015-04-01
This pilot study evaluated the molecular, histologic, and radiographic healing of bone to instrumentation with piezoelectric or high speed rotary (R) devices over a 3-week healing period. Fourteen Sprague-Dawley rats (Charles River Laboratories International, Inc., Wilmington, MA, USA) underwent bilateral tibial osteotomies prepared in a randomized split-leg design using Piezotome® (P1) (Satelec Acteon, Merignac, France), Piezotome 2® (P2) (Satelec Acteon), High-speed R instrumentation, or sham surgery (S). At 1 week, an osteogenesis array was used to evaluate differences in gene expression while quantitative analysis assessed percentage bone fill (PBF) and bone mineral density (BMD) in the defect, peripheral, and distant regions at 3 weeks. Qualitative histologic evaluation of healing osteotomies was also performed at 3 weeks. At 1 week, expression of 11 and 18 genes involved in bone healing was significantly (p < .05) lower following P1 and P2 instrumentation, respectively, relative to S whereas 16 and 4 genes were lower relative to R. No differences in PBF or BMD were detected between groups within the osteotomy defect. However, significant differences in PBF (p = .020) and BMD (p = .008) were noted along the peripheral region between P2 and R groups, being R the group with the lowest values. Histologically, smooth osteotomy margins were present following instrumentation using P1 or P2 relative to R. Piezoelectric instrumentation favors preservation of bone adjacent to osteotomies while variations in gene expression suggest differences in healing rates due to surgical modality. Bone instrumented by piezoelectric surgery appears less detrimental to bone healing than high-speed R device. © 2013 Wiley Periodicals, Inc.
Wangdi, Kuenzang; Otsuki, Bungo; Fujibayashi, Shunsuke; Tanida, Shimei; Masamoto, Kazutaka; Matsuda, Shuichi
2018-02-07
To report on suggested technique with four screws in a single vertebra (two pedicle screws and two direct vertebral body screws) for enhanced fixation with just one level cranially to a pedicle subtraction osteotomy (PSO). A 60-year-old woman underwent L4/5 fusion surgery for degenerative spondylolisthesis. Two years later, she was unable to stand upright even for a short time because of lumbar kyphosis caused by subsidence of the fusion cage and of Baastrup syndrome in the upper lumbar spine [sagittal vertical axis (SVA) of 114 mm, pelvic incidence of 75°, and lumbar lordosis (LL) of 41°]. She underwent short-segment fusion from L4 to the sacrum with L5 pedicle subtraction osteotomy. We reinforced the construct with two vertebral screws at L4 in addition to the conventional L4 pedicle screws. After the surgery, her sagittal parameters were improved (SVA, 36 mm; LL, 54°). Two years after the corrective surgery, she maintained a low sagittal vertical axis though high residual pelvic tilt indicated that the patient was still compensating for residual sagittal misalignment. PSO surgery for sagittal imbalance usually requires a long fusion at least two levels above and below the osteotomy site to achieve adequate stability and better global alignment. However, longer fixation may decrease the patients' quality of life and cause a proximal junctional failure. Our novel technique may shorten the fixation area after osteotomy surgery. These slides can be retrieved under Electronic Supplementary Material.
Prospective randomized study of chevron osteotomy versus Mitchell's osteotomy in hallux valgus.
Buciuto, Robert
2014-12-01
We conducted a prospective randomized trial to compare the most popular osteotomy types of operative treatment of hallux valgus (HV) used in Norway, Mitchell's osteotomy (MO) and chevron osteotomy (CO). One hundred twenty adult female patients were prospectively randomized to treatment with either MO or CO. All operative procedures were performed with ankle block and with tourniquet applied. None of the patients received any antibiotic or antithrombotic prophylaxis. The follow-up period was 3 years. Clinical results were rated according to the American Orthopaedic Foot and Ankle Society (AOFAS) Clinical Rating System (CRS). HV in the MO group was reduced from 30 (range, 20 to 44) to 15 (range, 8 to 24) degrees and IM angle from 11 (range, 6 to 14) to 7 (range, 4 to 11) degrees. HV in the CO group was reduced from 31 (range, 22 to 42) to 16 (range, 6 to 24) degrees and IM angle from 14 (range, 8 to 20) to 6 (range, 2 to 10) degrees. Transfer metatarsalgia occurred in 36 (60%) patients and hammertoe in 6 (10%) patients in the MO group. In the CO group, metatarsalgia occurred in 5 patients. The median loss of postoperative HV correction was 4 (range, 2 to 10) degrees in mild deformity and 6 (6 to 10) degrees in moderate deformity. Patients treated with CO had significantly better results for AOFAS CRS, number of postoperative complications, patient satisfaction, and length of sick leave for the employed patients. Based on our results, we consider that in female patients CO should be regarded as the first-line procedure for treatment of mild and moderate HV. Level I, prospective randomized study. © The Author(s) 2014.
Kieves, Nina R; Canapp, Sherman O; Lotsikas, Peter J; Christopher, Scott A; Leasure, Christopher S; Canapp, Debra; Gavin, Patrick R
2018-05-20
To determine the influence of low-intensity pulsed ultrasound (LIPUS) on radiographic healing and limb function after uncomplicated, stable osteotomies in dogs. In vivo, prospective, randomized, double-blinded, placebo-control study. Fifty client-owned dogs. Fifty client-owned dogs with naturally occurring unilateral cranial cruciate ligament rupture were enrolled prior to tibial plateau leveling osteotomy. Dogs were assigned to an active (LIPUS) treatment group or a placebo control (SHAM) treatment group via block randomization on the basis of age, weight, and affected limb. Dogs in the LIPUS treatment group underwent LIPUS treatments for 20 minutes daily: 1.5-MHZ ultrasound wave pulsed at 1 kHZ with a 20% duty cycle at an intensity of 30 mW/cm 2 for the duration of the study (12 weeks). Radiographic evaluation was performed at 4, 8, 10, and 12 weeks postoperatively to evaluate bone healing. Limb function was assessed with temporal-spatial gait analysis preoperatively and at 4, 8, and 12 weeks postoperatively by using a pressure-sensitive walkway system. Both groups had significant improvement in radiographic score and limb use over time. However, there was no significant difference in radiographic bone healing, or limb use as measured by objective gait analysis detected between the LIPUS treatment group and SHAM treatment group at any point in the study. LIPUS treatment did not improve healing in this stable osteotomy model. This study does not provide evidence to support the clinical application of LIPUS to stimulate the healing of stable, uncomplicated osteotomies to accelerate bone healing. © 2018 The American College of Veterinary Surgeons.
Volpon, José Batista
2012-09-01
Legg-Calvé-Perthes (LCP) disease is currently managed by mechanical containment of the femoral head in the hip socket. As evidence suggests that hip distraction may offer a new treatment strategy, we used arthrodistraction as a primary treatment for active forms of LCP disease and prospectively compared the results with the Salter innominate osteotomy. A total of 54 children, six years or older of both genders with severe forms of LCP disease in the stages of necrosis or revascularisation, were enrolled. Patients were submitted to either Salter innominate osteotomy (n = 28) or hip arthrodistraction (n = 26). Final radiographs were used to evaluate the Mose index, Wiberg angle, extrusion index and the Stulberg et al. classification. There were no significant differences in gender, age, lateral pillar classification and average follow-up time between the two groups. The osteotomy group progressed without major complications, but children in the joint distraction group experienced episodes of pin tract pain and infection, leading to the early removal of the external device in one case. Two patients developed joint stiffness, treated by physiotherapy or manipulation, and one child developed subluxation of the femoral head. The average time in distraction was 4.44 months (2.53-7.23 months). In the final evaluation the osteotomy group showed better containment of the femoral head. The Mose index and the Stulberg et al. classification were statistically similar between the two groups. Despite similar final radiological results, arthrodistraction was associated with a higher morbidity. Consequently, we do not recommend hip distraction as a primary treatment for the early stages of LCP disease.
Technical Modifications for Intraoral Quadrangular Le Fort II Osteotomy.
Klug, Clemens; Cede, Julia
2017-02-01
The intraoral quadrangular Le Fort II osteotomy (IQLFIIO) represents a reliable surgical method in cases of midfacial deficiency with good functional, esthetic, and stable long-term results. In this technical note, we present 3 surgical modifications to previous reports: 1) inferior orbital rim osteotomy by angulated piezosurgical instruments, thereby avoiding the use of chisels in the orbital region; 2) osteosynthetic fixation only laterally at the zygomatic buttress with 2 L-shaped miniplates, thus avoiding paranasal osteosynthesis; and 3) advancement step camouflage in the lateral infraorbital region with a compound mass of autologous bone chips and fibrin glue with the intention to reduce bone block-associated side effects. Thirteen consecutive patients presenting with midfacial deficiency and Class III malocclusion were treated by IQLFIIO and mandibular osteotomy. In all cases, osteotomy and consecutive down fracture could be conducted as planned using the piezotome. No atypical fractures were encountered. No cases of infraorbital nerve anesthesia developed. Midfacial hypesthesia was found in 54% of the operated sides after 3 months, in 23% after 6 months, and in 13% after 12 months. The 5-month postoperative 3-dimensional scans revealed osseous healing at the infraorbital advancement step. Our results suggest that IQLFIIO can be conducted fully without chisels in the orbital region. Implementation of piezosurgery in IQLFIIO allows for safe bone cutting in the orbital region. Two miniplates and step camouflage with fibrin glue-stabilized bone chips were sufficient for osseous healing. Future studies will focus on quantitative soft to hard tissue changes that occur with IQLFIIO advancement. Copyright © 2016 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.
The current status and future prospects of computer-assisted hip surgery.
Inaba, Yutaka; Kobayashi, Naomi; Ike, Hiroyuki; Kubota, So; Saito, Tomoyuki
2016-03-01
The advances in computer assistance technology have allowed detailed three-dimensional preoperative planning and simulation of preoperative plans. The use of a navigation system as an intraoperative assistance tool allows more accurate execution of the preoperative plan, compared to manual operation without assistance of the navigation system. In total hip arthroplasty using CT-based navigation, three-dimensional preoperative planning with computer software allows the surgeon to determine the optimal angle of implant placement at which implant impingement is unlikely to occur in the range of hip joint motion necessary for daily activities of living, and to determine the amount of three-dimensional correction for leg length and offset. With the use of computer navigation for intraoperative assistance, the preoperative plan can be precisely executed. In hip osteotomy using CT-based navigation, the navigation allows three-dimensional preoperative planning, intraoperative confirmation of osteotomy sites, safe performance of osteotomy even under poor visual conditions, and a reduction in exposure doses from intraoperative fluoroscopy. Positions of the tips of chisels can be displayed on the computer monitor during surgery in real time, and staff other than the operator can also be aware of the progress of surgery. Thus, computer navigation also has an educational value. On the other hand, its limitations include the need for placement of trackers, increased radiation exposure from preoperative CT scans, and prolonged operative time. Moreover, because the position of a bone fragment cannot be traced after osteotomy, methods to find its precise position after its movement need to be developed. Despite the need to develop methods for the postoperative evaluation of accuracy for osteotomy, further application and development of these systems are expected in the future. Copyright © 2016 The Japanese Orthopaedic Association. Published by Elsevier B.V. All rights reserved.
Influence of third molars in Le Fort 1 osteotomy
Balaji, S. M.
2011-01-01
Background: The influence of maxillary third molar (M3) on the outcomes of Le Fort 1 osteotomy is not deeply investigated. Aim: To investigate the influence of M3 on Le Fort 1 osteotomies. Setting: Tertiary Referral Center, operated by a single surgeon, prospective study. Period: January 2005 to December 2010. Patients: Consecutive Le Fort 1 osteotomy patients with both M3. Predictor Variable: Gender, position, M3 root morphology, and degree of impaction. Outcome Variable: Time taken after all osteotomy cuts to point of time when maxilla is placed in predetermined plane. Result: A total of 658 M3 in line of cut were studied. Of all M3, 312 were impacted, 28.9% were partially impacted and 23.7% were erupted. Of all the M3, 2.9% had their cuspal tips above the horizontal cut, 13.8% along the line of cut, and in 20.7% below the line but not erupted. Buccoverted tooth took shortest time (7.74 minutes), while palatoversion required more time (8.44 minutes) (P = 0.000). When the cuspal tip of M3 was located above the horizontal line of cut, the mean time required to achieve the planned position was 7 minutes, while the completely erupted teeth took a mean of 8.24 minutes (P = 0.000). Conclusion: When the M3 is placed higher, it takes lesser time to prepare basal bone to receive the maxilla at its predetermined level. Angulation of M3 influences the outcome. Deeply placed M3 reduces the manipulation of the greater pterygoid palatine vessels in the area thereby minimizing the bleeding in the surgical field. PMID:23482647
Kishi, Erin N; Hulse, Don
2016-05-01
To evaluate a center of rotation of angulation (CORA)-based leveling osteotomy for cranial cruciate ligament injury in dogs. Retrospective case series. Dogs (n=70). Medical records (March 2011 to March 2012) of dogs diagnosed with a cranial cruciate ligament (CCL) injury treated with a CORA-based leveling osteotomy and stabilized using a bone plate and headless compression screw were reviewed. Radiographs were reviewed for tibial plateau angle and radiographic healing at final evaluation graded on a 5-point scale. Follow-up for a minimum of 6 months postoperatively was conducted by owner completion of a questionnaire regarding their dog's function after surgery. Based on owner responses, clinical outcomes were established. CORA-based leveling osteotomy was used for 70 stifles with CCL injury. The mean time to final radiographic recheck was 107 days (range, 32-424 days). Radiographic healing scores were 42 dogs (69%) with grade 4, 17 dogs (28%) with grade 3, and 2 dogs (3%) with grade 2. The mean time to follow-up was 11.9 months (range 6-18 months). Fifty-four of the 70 (77%) dogs had full function, 13 (19%) had acceptable function, and 3 (4%) had unacceptable function. Complications occurred in 11 stifles (16%), including 3 incisional, 6 late-onset meniscal tears, and 2 implant related. The described method of a CORA-based leveling osteotomy can be successfully performed for treatment of CCL injury in dogs. At the time of mid-term and long-term owner follow-up, most dogs in this case series had returned to full function. © Copyright 2016 by The American College of Veterinary Surgeons.
Fürnstahl, Philipp; Vlachopoulos, Lazaros; Schweizer, Andreas; Fucentese, Sandro F; Koch, Peter P
2015-08-01
The accurate reduction of tibial plateau malunions can be challenging without guidance. In this work, we report on a novel technique that combines 3-dimensional computer-assisted planning with patient-specific surgical guides for improving reliability and accuracy of complex intraarticular corrective osteotomies. Preoperative planning based on 3-dimensional bone models was performed to simulate fragment mobilization and reduction in 3 cases. Surgical implementation of the preoperative plan using patient-specific cutting and reduction guides was evaluated; benefits and limitations of the approach were identified and discussed. The preliminary results are encouraging and show that complex, intraarticular corrective osteotomies can be accurately performed with this technique. For selective patients with complex malunions around the tibia plateau, this method might be an attractive option, with the potential to facilitate achieving the most accurate correction possible.
[Osteosynthesis in the Surgical Treatment of Prognathism: State of The Art].
Durão, Nuno; Amarante, José
2017-03-31
Prognathism is a common skeletal facial abnormality, associated with class III malocclusion, often with repercussions in quality of life. In addition to orthodontic treatment, sagittal split ramus osteotomy is the most common technique for its correction, and segment osteosynthesis is an important element of the post-surgical outcome. A search for relevant literature was conducted in the PubMed/MEDLINE database and in other relevant sources. The stability of different fixation methods, their repercussions on inferior alveolar nerve lesions, and the type of material are among the most researched subjects. Recent research about the type of osteosynthesis applied in the sagittal split ramus osteotomy for mandibular setback is discussed. Miniplates appear to be the better option for fixation of sagittal split osteotomy for mandibular setback. Bioabsorbable osteosynthesis may be an acceptable alternative to titanium.
[Melorheostosis of the foot: a case report of a rare entity].
Craiovan, B; Zeiler, G; Delling, G; Schuh, A
2006-12-01
Melorheostosis is a rare bony dysplasia and often recognised just sporadically by chance. We present a case of a 15 year old girl who presented a melorheostosis of the left foot. After birth there was recognized a shortening and deformity of the 2nd toe on the left foot. Furthermore she had an interphalangeal hallux valgus that displaced the 2nd toe increasingly. Thus in the last years there were more and more difficulties to wear normal shoes. Conservative therapy was not successful. We performed a lengthening extending osteotomy of the 2nd toe (a modified Weil osteotomy) and an Akin osteotomy of the interphalangeal hallux valgus. Since the surgical procedure the patient is out of any complaints. We demonstrate the radiologic and histologic findings and discuss the relevant literature and possible etiology.
Morton, L; Downie, I
2017-11-01
In some units, lower wisdom teeth are extracted in a separate procedure before bilateral sagittal split osteotomy (BSSO), whereas in others they are removed at the time of the osteotomy. We identified 57 patients who had BSSO at Salisbury Hospital between October 2013 and September 2015, 40 of whom had their wisdom teeth extracted at the same time. The remaining 17 did not have wisdom teeth. Patients who have these teeth extracted as a separate procedure require at least one day off work, which can result in a loss of earnings. Our findings showed that the removal of third molars at the time of orthognathic surgery has considerable social and financial benefits, and does not increase the risk of morbidity. Copyright © 2017. Published by Elsevier Ltd.
Fayazi, Amir H; Nguyen, Hoan-Vu; Juliano, Paul J
2002-12-01
Twenty-three patients with stage II posterior tibial tendon dysfunction who had failed non-surgical therapy were treated with flexor digitorum longus transfer and calcaneal osteotomy. At latest follow-up averaging 35 +/- 7 months (range, 24 to 51 months), 22 patients (96%) were subjectively "better" or "much better." No patient had difficulty with shoe wear; however, four patients (17%) required routine orthotic use consisting of a molded shoe insert. AOFAS scores were available on 21 patients and improved from a preoperative mean of 50 +/- 14 (range, 27 to 85) to a postoperative mean of 89 +/- 10 (range, 70 to 100). Our experience, at an intermediate date follow-up is that calcaneal osteotomy and flexor digitorum longus transfer is a safe and effective form of treatment for stage II posterior tibial tendon dysfunction.
[Coxa vara. Isolated growth of the greater trochanter. Prevention-treatment].
Litt, R; Albassir, A; Willems, S; Debry, R
1990-01-01
Prevention of avascular complications is a primary aim. The ischemic insult to the femoral head provokes different types of morphologic deformities depending on its location. When the lateral part of the growth plate is affected, the head will be in valgus with a short neck, on the contrary, when the medial part is affected, a coxa vara occurs. The sooner the growth is stopped, the shorter the neck will be. Nevertheless, the greater trochanter will continue its growth and under certain conditions, will extend beyond the head. The Articulo-Trochanteric Distance is a measurement of the deformity which may be checked regularly. Early recognition permits prevention and adequate treatment. Treatment options include epiphysiodesis of the greater trochanter before the age of 8 to 10 years, trochanteric repositioning with osteotomy, and valgus osteotomy (Pauwels' Y-osteotomy).
[Endoscopically assisted fronto-orbitary correction in trigonocephaly].
Hinojosa, J; Esparza, J; García-Recuero, I; Romance, A
2007-01-01
The development of multidisciplinar Units for Craneofacial Surgery has led to a considerable decrease in morbidity even in the cases of more complex craniofacial syndromes. The use of minimally invasive techniques for the correction of some of these malformations allows the surgeon to minimize the incidence of complications by means of a decrease in the surgical time, blood salvage and shortening of postoperative hospitalization in comparison to conventional craniofacial techniques. Simple and milder craniosynostosis are best approached by these techniques and render the best results. Different osteotomies resembling standard fronto-orbital remodelling besides simple suturectomies and the use of postoperative cranial orthesis may improve the final aesthetic appearence. In endoscopic treatment of trigonocephaly the use of preauricular incisions achieves complete pterional resection, lower lateral orbital osteotomies and successful precoronal frontal osteotomies to obtain long lasting and satisfactory outcomes.
Piezosurgical osteotomy for harvesting intraoral block bone graft
Lakshmiganthan, Mahalingam; Gokulanathan, Subramanium; Shanmugasundaram, Natarajan; Daniel, Rajkumar; Ramesh, Sadashiva B.
2012-01-01
The use of ultrasonic vibrations for the cutting of bone was first introduced two decades ago. Piezoelectric surgery is a minimally invasive technique that lessens the risk of damage to surrounding soft tissues and important structures such as nerves, vessels, and mucosa. It also reduces damage to osteocytes and permits good survival of bony cells during harvesting of bone. Grafting with intraoral bone blocks is a good way to reconstruct severe horizontal and vertical bone resorption in future implants sites. The piezosurgery system creates an effective osteotomy with minimal or no trauma to soft tissue in contrast to conventional surgical burs or saws and minimizes a patient's psychological stress and fear during osteotomy under local anesthesia. The purpose of this article is to describe the harvesting of intraoral bone blocks using the piezoelectric surgery device. PMID:23066242
Improvement of nasal breathing in cleft patients following midface osteotomy.
Götzfried, H F; Masing, H
1988-02-01
In 20 adult cleft patients, the influence of a Le-Fort-I-osteotomy and ventral-caudal advancement of the maxilla on nasal breathing was studied. An increase of nasal air flow in the majority of patients is due to an increase in the volume of nasal skeleton and/or in the nasolabial angle and alar nasal base. Rhinomanometric measurements and X-ray examination confirm the results.
Klems, H
1976-02-01
High tibial osteotomy has proved its value in the treatment of gonarthrosis with or without axis deformity. The thrust of weight-bearing and other stresses is lessened on the degenerated tibial condyle and transferred to the more normal condyle. The stable fixation by means of external fixation allows early movement of the knee joint.-R-ferences to operative technique, indication, complications and after-treatment.
[Osteotomies for treating developmental disorders of the neurocranium and visceral cranium].
Mühling, J
1991-02-01
Craniofacial deformities are primarily caused by premature synostosis of cranial sutures. Depending on the involved sutures, typical deformities of the neuro- and visceral cranium are produced. They result in severe functional and aesthetic disturbances. Several osteotomies, which do not only make an aesthetic improvement possible but a correction of severe malfunction, are available for therapy. Preoperative planning and postoperative treatment require the combination of orthodontics and maxillofacial surgery.
Park, C-H; Jang, J-H; Lee, S-H; Lee, W-C
2013-05-01
The purpose of this study was to compare the results of proximal and distal chevron osteotomy in patients with moderate hallux valgus. We retrospectively reviewed 34 proximal chevron osteotomies without lateral release (PCO group) and 33 distal chevron osteotomies (DCO group) performed sequentially by a single surgeon. There were no differences between the groups with regard to age, length of follow-up, demographic or radiological parameters. The clinical results were assessed using the American Orthopaedic Foot and Ankle Society (AOFAS) scoring system and the radiological results were compared between the groups. At a mean follow-up of 14.6 months (14 to 32) there were no significant differences in the mean AOFAS scores between the DCO and PCO groups (93.9 (82 to 100) and 91.8 (77 to 100), respectively; p = 0.176). The mean hallux valgus angle, intermetatarsal angle and sesamoid position were the same in both groups. The metatarsal declination angle decreased significantly in the PCO group (p = 0.005) and the mean shortening of the first metatarsal was significantly greater in the DCO group (p < 0.001). We conclude that the clinical and radiological outcome after a DCO is comparable with that after a PCO; longer follow-up would be needed to assess the risk of avascular necrosis.
Meehan, John P; Khadder, Mohammad A; Jamali, Amir A; Trauner, Kenneth B
2009-05-01
Posttraumatic osteoarthritis of the knee can be associated with angular deformities and alterations in the joint line as a result of the initial trauma and subsequent surgical procedures. These deformities can be characterized as extra-articular or intra-articular or can involve aspects of both. Conversion to total knee arthroplasty (TKA) may require either a staged or a simultaneous corrective osteotomy to restore the limb alignment and proper knee function. This article describes a closing wedge retrotubercular tibia osteotomy performed concurrently with TKA in an effort to correct an extra-articular varus deformity and to improve the patella tendon height in relation to the reconstructed joint line. A 57-year-old man previously treated for a Schatzker type 6 tibia plateau fracture presented with symptoms of arthritis pain and instability as a result of a varus thrust with weight bearing. Radiographs revealed posttraumatic osteoarthritis, a 35 degrees varus deformity, and patella infera. Maintaining the tibia tubercle continuity with the distal tibia allowed for correction of the varus deformity and improvement in the patella tendon height relative to the joint line. At 5-year follow-up, the patient had osteotomy healing, clinically neutral limb alignment, and improvement in joint line biomechanics with resolution of symptoms of pain and instability.
Nakamura, R; Komatsu, N; Fujita, K; Kuroda, K; Takahashi, M; Omi, R; Katsuki, Y; Tsuchiya, H
2017-10-01
Open wedge high tibial osteotomy (OWHTO) for medial-compartment osteoarthritis of the knee can be complicated by intra-operative lateral hinge fracture (LHF). We aimed to establish the relationship between hinge position and fracture types, and suggest an appropriate hinge position to reduce the risk of this complication. Consecutive patients undergoing OWHTO were evaluated on coronal multiplanar reconstruction CT images. Hinge positions were divided into five zones in our new classification, by their relationship to the proximal tibiofibular joint (PTFJ). Fractures were classified into types I, II, and III according to the Takeuchi classification. Among 111 patients undergoing OWHTOs, 22 sustained lateral hinge fractures. Of the 89 patients without fractures, 70 had hinges in the zone within the PTFJ and lateral to the medial margin of the PTFJ (zone WL), just above the PTFJ. Among the five zones, the relative risk of unstable fracture was significantly lower in zone WL (relative risk 0.24, confidence interval 0.17 to 0.34). Zone WL appears to offer the safest position for the placement of the osteotomy hinge when trying to avoid a fracture at the osteotomy site. Cite this article: Bone Joint J 2017;99B10:1313-18. ©2017 The British Editorial Society of Bone & Joint Surgery.
Paulose, Joby; Markose, Eldho
2014-12-01
This paper is a comparative photometric evaluation of soft tissue changes in patients with CLP associated with maxillary deficiency treated with conventional Le Fort I advancement osteotomy (ALO) and anterior maxillary distraction (AMD). Twenty patients with maxillary hypoplasia associated with cleft lip and palate who had undergone either LeFort I osteotomy or distraction osteogenesis with maxillary advancement were included in this study. Frontal and profile photographs were used to ascertain the changes post-surgically. Photographs were obtained before treatment and 1 year after surgical correction in both groups. Vertical as well as horizontal changes in pronasale was well observed in both groups. A substantial increase in nasal parameters was noted in case of AMD group in comparison to ALO group. Though maxillary advancement was quite evident in AMD and ALO groups, a significant and consistent change was observed in AMD group. Significant vertical and horizontal changes were seen with respect to subnasale and labrale superius in AMD group. The hard and soft tissue changes produced by AMD by intra oral distractors were being evaluated so far. The results of the above studies have proved the excellence of AMD over conventional osteotomies. The present study goes hand in hand with the research outcomes till date.
NASA Astrophysics Data System (ADS)
Dahake, Sandeep; Kuthe, Abhaykumar; Mawale, Mahesh
2017-10-01
This paper aims to describe virtual surgical planning (VSP), computer aided design (CAD) and rapid prototyping (RP) systems for the preoperative planning of accurate treatment of the Brodie's Syndrome. 3D models of the patient's maxilla and mandible were separately generated based on computed tomography (CT) image data and fabricated using RP. During the customized surgical osteotmy guide (CSOG) design process, the correct position was identified and the geometry of the CSOG was generated based on affected mandible of the patient and fabricated by a RP technique. Surgical approach such as preoperative planning and simulation of surgical procedures was performed using advanced software. The VSP and RP assisted CSOG was used to avoid the damage of the adjacent teeth and neighboring healthy tissues. Finally the mock surgery was performed on the biomodel (i.e. diseased RP model) of mandible with reference to the normal maxilla using osteotomy bur with the help of CSOG. Using this CSOG the exact osteotomy of the mandible and the accurate placement of the distractor were obtained. It ultimately improved the accuracy of the surgery in context of the osteotomy and distraction. The time required in cutting the mandible and placement of the distractor was found comparatively less than the regular free hand surgery.
Boissière, Louis; Bourghli, Anouar; Vital, Jean-Marc; Gille, Olivier; Obeid, Ibrahim
2013-06-01
Sagittal malalignment is frequently observed in adult scoliosis. C7 plumb line, lumbar lordosis and pelvic tilt are the main factors to evaluate sagittal balance and the need of a vertebral osteotomy to correct it. We described a ratio: the lumbar lordosis index (ratio lumbar lordosis/pelvic incidence) (LLI) and analyzed its relationships with spinal malalignment and vertebral osteotomies. 53 consecutive patients with a surgical adult scoliosis had preoperative and postoperative full spine EOS radiographies to measure spino-pelvic parameters and LLI. The lack of lordosis was calculated after prediction of theoretical lumbar lordosis. Correlation analysis between the different parameters was performed. All parameters were correlated with spinal malalignment but LLI is the most correlated parameter (r = -0.978). It is also the best parameter in this study to predict the need of a spinal osteotomy (r = 1 if LLI <0.5). LLI is a statistically validated parameter for sagittal malalignment analysis. It can be used as a mathematical tool to detect spinal malalignment in adult scoliosis and guides the surgeon decision of realizing a vertebral osteotomy for adult scoliosis sagittal correction. It can be used as well for the interpretation of clinical series in adult scoliosis.
Research perspectives in first metatarsal osteotomy and fixation stability.
Landsman, A S; Higgins, K R; Lampe, N
1996-07-01
Well-designated research is required to provide clinical guidance by validation of old and new methods. Variables, including technologic advancement in surgical techniques, diagnosis, shoe design, and immobilization all contribute to the challenge of investigating surgical procedures of the foot. This article highlights some of the relevant research pertaining to first metatarsal osteotomies and internal fixation and provides direction for potential, future research. Numerous aspects about the research techniques involved are discussed.
Leiggener, C; Messo, E; Thor, A; Zeilhofer, H-F; Hirsch, J-M
2009-02-01
The free fibular flap is the standard procedure for reconstructing mandibular defects. The graft has to be contoured to fit the defect so preoperative planning is required. The systems used previously do not allow transfer of the surgical plan to the operation room in an optimal way. The authors present a method to bring the virtual plan to real time surgery using a rapid prototyping guide. Planning was conducted using the Surgicase CMF software simulating surgery on a workstation. The osteotomies were translated into a rapid prototyping guide, sterilised and applied during surgery on the fibula allowing for the osteotomies and osteosynthesis to be performed with intact circulation. During reconstruction the authors were able to choose the best site for the osteotomies regarding circulation and as a result increased the precision and speed of treatment.
An unusual variation in the anatomy of the uncinate process in external dacryocystorhinostomy
Puri, Nitin
2008-01-01
Variations in the bony components of the nose are often encountered. One such variation was found in a 49-year-old male who had undergone conventional external dacryocystorhinostomy for adult onset nasolacrimal duct blockage. Intraoperatively, a thick bar of bone was seen beneath and parallel to the lacrimal sac fossa after a complete osteotomy had been made. Another osteotomy had to be fashioned in this bone to reach the nasal cavity. Postoperative 3D computed tomographic scan revealed the bone to be an anatomical variation of the uncinate process of the ethmoidal bone which was rather anteriorly placed, much thicker than usual, and attached to the nasal roof. The uncinate process is thin, curved and its anterior edge may frequently overlap some part of the lacrimal fossa. However, to our knowledge, the presence of such a large and thick uncinate process necessitating an additional large osteotomy has not been reported. PMID:18711272
Advances in bone surgery: the Er:YAG laser in oral surgery and implant dentistry
Stübinger, Stefan
2010-01-01
The erbium-doped yttrium aluminium garnet (Er:YAG) laser has emerged as a possible alternative to conventional methods of bone ablation because of its wavelength of 2.94 μm, which coincides with the absorption peak of water. Over the last decades in several experimental and clinical studies, the widespread initial assumption that light amplification for stimulated emission of radiation (laser) osteotomy inevitably provokes profound tissue damage and delayed wound healing has been refuted. In addition, the supposed disadvantage of prolonged osteotomy times could be overcome by modern short-pulsed Er:YAG laser systems. Currently, the limiting factors for a routine application of lasers for bone ablation are mainly technical drawbacks such as missing depth control and a difficult and safe guidance of the laser beam. This article gives a short overview of the development process and current possibilities of noncontact Er:YAG laser osteotomy in oral and implant surgery. PMID:23662082
Biomechanical analysis of titanium fixation plates and screws in sagittal split ramus osteotomies.
Atik, F; Atac, M S; Özkan, A; Kılınc, Y; Arslan, M
2016-01-01
The aim of the study was to evaluate the mechanical behavior of three different fixation methods used in the bilateral sagittal split ramus osteotomy. Three different three-dimensional finite element models were created, each corresponding to three different fixation methods. The mandibles were fixed with double straight 4-hole, square 4-hole, and 5-hole Y plates. 150 N incisal occlusal loads were simulated on the distal segments. ANSYS software ((v 10; ANSYS Inc., Canonsburg, PA) was used to calculate the Von Mises stresses on fixative appliances. The highest Von Mises stress values were found in Y plate. The lowest values were isolated in double straight plate group. It was concluded that the use of double 4-hole straight plates provided the sufficient stability on the osteotomy site when compared with the other rigid fixation methods used in this study.
Influence of Drilling Speed on Stability of Tapered Dental Implants: An Ex Vivo Experimental Study.
Almeida, Karen P; Delgado-Ruiz, Rafael; Carneiro, Leandro G; Leiva, Alberto Bordonaba; Calvo-Guirado, Jose Luis; Gómez-Moreno, Gerardo; Malmström, Hans; Romanos, Georgios E
2016-01-01
The aim of this study was to evaluate whether the drilling speed used during implant site preparation influences primary stability. Eighty tapered designed implants (3.8 × 10 mm) were inserted following osteotomies created in solid rigid polyurethane foam (simulating bone type II) and cellular rigid polyurethane foam (simulating bone type IV). Half were prepared using drilling speeds of 800 rpm (low speed), and the other half were prepared using speeds of 1,500 rpm (high speed). Following insertion, implant primary stability was measured using Periotest and Osstell (resonance frequency analysis [RFA]) devices. Two-way analysis of variance (ANOVA) used for this study found that the drilling speed used to create the osteotomies appeared to have no significant impact on primary stability. The bone quality and not the osteotomy drilling speed seems to influence the implant primary stability.
Ishida, Takayoshi; Ikemoto, Shigehiro; Ono, Takashi
2015-09-01
In some skeletal Class III adult patients with nasomaxillary hypoplasia, the LeFort I osteotomy provides insufficient correction. This case report describes a 20-year-old woman with a combination of nasomaxillary hypoplasia and a protrusive mandible with a congenitally missing mandibular second premolar. We performed a LeFort II osteotomy for maxillary advancement. Autotransplantation of a tooth was also performed; the donor tooth was used to replace the missing permanent tooth. To increase the chance of success, we applied light continuous force with an improved superelastic nickel-titanium alloy wire technique before extraction and after transplantation. The patient's profile and malocclusion were corrected, and the autotransplanted tooth functioned well. The postero-occlusal relationships were improved, and ideal overbite and overjet relationships were achieved. The methods used in this case represent a remarkable treatment. Copyright © 2015 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.
Walter, Sebastian G; Schwering, Tobias; Preiss, Stefan
2017-01-01
Introduction: Achondroplasia is the most common form of dwarfism in humans and is orthopedically characterized by shortened extremities and an exaggerated lumbar lordosis. The surgical challenges are maintenance of axial alignment during limb lengthening as well as joint preservation and alignment restoration. Case Report: We present a 46-year-old female suffering from achondroplasia with severe pain in both knees. Severe varus deformities of both femurs and degeneration of both knee joints became apparent on clinical and radiological examination. On each femur, we performed one-staged, lateral closed-wedge osteotomy, and total knee arthroplasty (TKA). Subsequently, the patient was relieved of knee joint pain and gained a greater range of motion. Conclusion: One-staged valgization osteotomy and concomitant TKA represents a challenging, yet reasonable, surgical solution in axially severe malaligned and joint degenerated patients. PMID:28819598
Barrak, Ibrahim; Joób-Fancsaly, Árpád; Braunitzer, Gábor; Varga, Endre; Boa, Kristóf; Piffkó, József
2018-06-01
To investigate drill wear and consequent intraosseous temperature elevation during freehand and guided bone drilling, with attention to the effect of metal-on-metal contact during guided drilling. Osteotomies were performed on bovine ribs, with 2.0 mm diameter stainless steel drill bits of the SMART Guide System, under 3 sterilization protocols, at 800, 1200, 1500, and 2000 rpm. Sterilization was performed after every 3 drilling. Temperature was measured after every 30 drilling. The studied contributing factors had a cumulative effect, and each contributed significantly to temperature elevation. Whether guide use led to a near-necrotic (47°C) temperature increment depended largely on the applied sterilization protocol. The metal sleeve is a significant contributing factor to heat generation during guided osteotomy, but its effect can be offset by keeping the other studied factors under control.
Use of piezosurgery during maxillary sinus elevation: clinical results of 40 consecutive cases.
Cassetta, Michele; Ricci, Laura; Iezzi, Giovanna; Calasso, Sabrina; Piattelli, Adriano; Perrotti, Vittoria
2012-12-01
The aim of this study was to evaluate the performance of piezoelectric devices during sinus elevation to determine the percentage of sinus membrane perforation and the time required to perform the antrostomy and elevation of the membrane. A total of 35 patients and 40 grafted sinuses were included. The parameters recorded were bony window length and height, bone thickness, osteotomy area, operative time, and number of perforations. Seven (17.5%) membrane perforations were observed, which were repaired with resorbable membranes. The mean length, height, and thickness of the osteotomy were 13.8 ± 2.9 mm, 6.9 ± 1.4 mm, and 1.4 ± 0.4 mm, respectively. The mean osteotomy area was 96.8 ± 32.2 mm(2), and the mean operative time was 10.3 ± 2.1 minutes. This study demonstrated that a piezoelectric device could be an attractive alternative for successful sinus augmentation.
Gao, Yongbo; Jiang, Ai; Li, Boyou; Yang, Liming
2011-08-01
To study the effect of piezosurgery in the extraction of mandibular impacted third molars. 228 mandibular impacted third molars with relative difficulty for extraction according to the scheme of degree of difficulty for extraction were included in the study, and were divided into two groups (114 teeth each group): Test group (treated by piezosurgery), control group (treated by traditional chisel osteotomy). The surgery time and pain, restriction of mouth opening and facial swelling after surgery, were evaluated in both groups. The average surgery time was (16 +/- 5.2) min in test group and (30 +/- 8.7) min in control group. The surgery time, pain, facial swelling rate, and restriction of mouth opening were lower than control group (P<0.05). Compared with traditional chisel osteotomy, the average surgery time with piezosurgery was significantly shorter and the complications are obviously reduced.
Knee flexion deformity from poliomyelitis treated by supracondylar femoral extension osteotomy.
de Moraes Barros Fucs, Patricia M; Svartman, Celso; de Assumpção, Rodrigo Montezuma César
2005-12-01
Between April 1979 and August 1993, we treated 39 patients (49 knees) with knee flexion deformity after Poliomyelitis. All were subjected to fractional hamstring lengthening and supracondylar femoral extension osteotomy in the same surgical procedure. The goal was to correct the deformity and fit the lower extremities in long braces to improve or promote gait. Patients' mean age was 19.5 (6.5-39) years and the mean knee flexion deformity was 65 degrees (24-158 degrees). The mean follow-up was 15.5 (11.5-25) years. Postoperatively, 22 knees had full extension, in 26 there was an extension lag between -1 and -10 degrees and in one a lag greater than 10 degrees. There were no neurovascular complications and all patients were fitted with long leg braces. Surgical planning is important, especially in severe deformities, where shortening of the femur is necessary to facilitate the osteotomy and relax the neurovascular structures.
Thoracolumbar imbalance analysis for osteotomy planification using a new method: FBI technique.
Le Huec, J C; Leijssen, P; Duarte, M; Aunoble, S
2011-09-01
Treatment of spine imbalance by posterior osteotomy is a valuable technique. Several surgical techniques have been developed and proposed to redress the vertebral column in harmonious kyphosis in order to recreate correct sagittal alignment. Although surgical techniques proved to be adequate, preoperative planning still is mediocre. Multiple suggestions have been proposed, from cutting tracing paper to ingenious mathematical formulas and computerised models. The analysis of the pelvic parameters to try to recover the initial shape of the spine before the spine imbalance occurred is very important to avoid mistakes during the osteotomy planification. The authors proposed their method for the osteotomy planning paying attention to the pelvic, and spine parameters and in accordance with Roussouly's classification. The pre operative planning is based on a full-body X-ray including the spine from C1 to the femoral head and the first 10 cm of the femur shaft. Using all the balance parameters provided, a formula name FBI is proposed. Calculation of the osteotomy is basic goniometry, the midpoint of the C7 inferior plateau (point a) is transposed horizontally on the projected future C7 plumb line (point b) crossing posterior S1 plateau on a sagittal X-ray. These are the first two reference points. A third reference point is made on the anterior wall of the selected vertebra for osteotomy at mid height of the pedicle (point c) mainly L4 vertebra. These three points form a triangle with the tip being the third reference point. The angle represented by this triangle is the theoretical angle of the osteotomy. Two more angles should be measured and eventually added. The femur angulation measured as the inclination of the femoral axis to the vertical. And a third angle named the compensatory pelvic tilt to integrate the type of pelvis. If the pelvic tilt is between 15 and 25° or is higher than 25° you must add 5 or 10°, respectively. This compensatory tilt is based on a clinical analysis of operated patients. This planification was applied in a retrospective study of 18 patients and showed why in some cases improper correction was performed and prospectively in 8 cases with good clinical outcomes and correct spinal alignment. Sometimes it is necessary to find an acceptable compromise when rebalancing the spine paying attention to the general parameters of the patients like: age, osteoporosis, systemic disease etc. This FBI technique can be used even for small lordosis restoration: it gave a good evaluation of the amount of correction needed and then the surgeon had the choice to use the appropriate technique to obtain a good balance.
Dahl, Benny T; Harris, Jonathan A; Gudipally, Manasa; Moldavsky, Mark; Khalil, Saif; Bucklen, Brandon S
2017-11-01
Pedicle subtraction osteotomy (PSO) is performed to treat rigid, sagittal spinal deformities, but high rates of implant failure are reported. Anterior lumbar interbody fusion has been proposed to reduce this risk, but biomechanical investigation is lacking. The goal of this study was to quantify the (1) destabilizing effects of a lumbar osteotomy and (2) contribution of anterior lumbar interbody fusion (ALIF) at the lumbosacral junction as recommended in literature. Fourteen fresh human thoracolumbosacral spines (T12-S1) were tested in flexion-extension (FE), lateral bending (LB), and axial rotation (AR). Bilateral pedicle screws/rods (BPS) were inserted at T12-S1, cross connectors (CC) at T12-L1 and L5-S1, and anterior interbody spacers (S) at L4-5 and L5-S1. In one group, PSO was performed in seven specimens at L3. All specimens were sequentially tested in (1) Intact; (2) BPS; (3) BPS + CC; (4) BPS + S; and (5) BPS + S + CC; a second group of seven spines were tested in the same sequence without PSO. Mixed-model ANOVA with repeated measures was performed (p ≤ 0.05). At the osteotomy site (L2-L4), in FE, BPS, BPS + CC, BPS + S, BPS + CC + S reduced motion to 11.2, 12.9, 10.9, and 11.4%, respectively, with significance only found in BPS and BPS + S construction (p ≤ 0.05). All constructs significantly reduced motion across L2-L4 in the absence of PSO, across all loading modes (p ≤ 0.05). PSO significantly destabilized L2-L4 axial rotational stability, regardless of operative construction (p ≤ 0.05). Across L4-S1 and L2-S1, all instrumented constructs significantly reduced motion, in both PSO- and non-PSO groups, during all loading modes (p ≤ 0.05). These findings suggest anterior interbody fusion minimally immobilizes motion segments, and interbody devices may primarily act to maintain disc height. Additionally, lumbar osteotomy destabilizes axial rotational stability at the osteotomy site, potentially further increasing mechanical demand on posterior instrumentation. Clinical studies are needed to assess the impact of this treatment strategy.
Fresh-Stored Osteochondral Allograft for Treatment of Osteochondritis Dissecans the Femoral Head
2010-01-01
rotational osteotomy for treatment of avascular necrosis of the femoral head. Arch Orthop Trauma Surg. 1996;115:80–84. Volume 468, Number 2, February 2010...14. Hall FM. Osteochondrosis dissecans and avascular necrosis of bone. (Comment on: Skeletal Radiol. 1990;19(6):419–421.) Skeletal Radiol. 1991;20...439–456. 28. Schneider W, Aigner N, Pinggera O, Knahr K. Intertrochanteric osteotomy for avascular necrosis of the head of the femur: sur- vival
[Correction of posttraumatic thoracolumbar kyphosis with modified pedicle subtraction osteotomy].
Chen, Fei; Kang, Yijun; Zhou, Bin; Dai, Zhehao
2016-11-28
To evaluate the efficacy and safety of modified pedicle subtraction osteotomy for treatment of thoracolumbar old fracture with kyphosis. Methods: From January 2003 to January 2013, 58 patients of thoracolumbar kyphosis, who underwent modified pedicle subtraction osteotomy, were reviewed. Among them, 45 cases underwent initial operation and 13 cases underwent revision surgery. Preoperative and postoperative kyphotic Cobb's angle, score of back pain, as well as the incidence of complication were accessed by using visual analogue scale (VAS) and Oswestry disability index (ODI). Results: Mean follow-up duration was 42 months (range, 24-60 months). Average operative time was 258 min (range, 190-430 min), while average bleeding was 950 mL (range, 600-1 600 mL). All the patients were significantly improved in function and self-image, and achieved kyphosis correction with 17.9°± 4.3°. VAS of low back pain was decreased by 3.1±0.6; ODI was dropped by 25.3%±5.5%. 3 patients (5.2%) suffered anterior thigh numbness and got recovery after 3 months of follow-up. Complications happened in 19 patients, including 12 with cerebrospinal fluid leak, 4 with superficial wound infection, and 3 with urinary tract infection. All these complications were managed properly and none of them underwent reoperation. Conclusion: Modified pedicle subtraction osteotomy is a safe and effective technique for the treatment of old fracture with kyphosis.
Fakoor, Mohammad; Sarafan, Naser; Mohammadhoseini, Payam; Khorami, Mohsen; Arti, Hamidreza; Mosavi, SeyedShahnam; Aghaeeaghdam, Amir
2014-01-01
Background: Hallux valgus deformity is a common chronic problem with a reported prevalence of 28.4% and its chief complaint is pain. Thus far, different surgical procedures with their proposed indications have been introduced. This study compared three current procedures, namely the chevron and scarf osteotomies and the McBride procedure. Methods: This retrospective cohort was conducted at the Ahvaz University of Medical Sciences on 44 patients with moderate hallux valgus deformity from 2010 and 2013. All of the patients underwent one of the three procedures (chevron, scarf or McBride). Preoperative and follow up radiographies were evaluated in terms of hallux valgus and intermetatarsal angle correction. The Foot and Ankle Disability Index was filled out to assess the functional outcome and the Visual Analogue Scale was used to evaluate pain. Also, satisfaction, aesthetics and the rate of recurrence was evaluated. Results: Hallux valgus angle and intermetatarsal angle correction were significantly higher in scarf, but not in chevron and McBride. However, from amongst the three procedures, there was no significant difference in terms of the Foot and Ankle Disability Index score, aesthetics, satisfaction level, pain score and recurrence rate. Conclusions: Considering that scarf osteotomy had better results in this study, we think that scarf osteotomy can be considered as a first choice for the treatment of moderate hallux valgus deformity. PMID:25207310
Fakoor, Mohammad; Sarafan, Naser; Mohammadhoseini, Payam; Khorami, Mohsen; Arti, Hamidreza; Mosavi, SeyedShahnam; Aghaeeaghdam, Amir
2014-03-01
Hallux valgus deformity is a common chronic problem with a reported prevalence of 28.4% and its chief complaint is pain. Thus far, different surgical procedures with their proposed indications have been introduced. This study compared three current procedures, namely the chevron and scarf osteotomies and the McBride procedure. This retrospective cohort was conducted at the Ahvaz University of Medical Sciences on 44 patients with moderate hallux valgus deformity from 2010 and 2013. All of the patients underwent one of the three procedures (chevron, scarf or McBride). Preoperative and follow up radiographies were evaluated in terms of hallux valgus and intermetatarsal angle correction. The Foot and Ankle Disability Index was filled out to assess the functional outcome and the Visual Analogue Scale was used to evaluate pain. Also, satisfaction, aesthetics and the rate of recurrence was evaluated. Hallux valgus angle and intermetatarsal angle correction were significantly higher in scarf, but not in chevron and McBride. However, from amongst the three procedures, there was no significant difference in terms of the Foot and Ankle Disability Index score, aesthetics, satisfaction level, pain score and recurrence rate. Considering that scarf osteotomy had better results in this study, we think that scarf osteotomy can be considered as a first choice for the treatment of moderate hallux valgus deformity.
Zhou, Haichao; Ren, Haoyang; Li, Chunguang; Xia, Jiang; Yu, Guangrong; Yang, Yunfeng
2017-01-01
Purpose . To investigate the effect of cuboid osteotomy lateral column lengthening (LCL) for the correction of stage II B adult-acquired flatfoot deformity in cadaver. Methods . Six cadaver specimens were loaded to 350 N. Flatfoot models were established and each was evaluated radiographically and pedobarographically in the following conditions: (1) intact foot, (2) flatfoot, and (3) cuboid osteotomy LCL (2, 3, 4, and 5 mm). Results . Compared with the flatfoot model, the LCLs showed significant correction of talonavicular coverage on anteroposterior radiographs and talus-first metatarsal angle on both anteroposterior and lateral radiographs ( p < .05). Compared with the intact foot, the above angles of the LCLs showed no significant difference except the 2 mm LCL. In terms of forefoot pressure, medial pressure of the 2 mm LCL ( p = .044) and lateral pressure of the 3, 4, and 5 mm LCLs showed statistical differences ( p < .05), but lateral pressure of the 3 mm LCL was not more than the intact foot as compared to the 4 and 5 mm LCLs, which was less than medial pressure. Conclusion . Cuboid osteotomy LCL procedure avoids damage to subtalar joint and has a good effect on correction of stage II B adult-acquired flatfoot deformity with a 3 mm lengthening in cadavers.
Zhou, Haichao; Ren, Haoyang; Li, Chunguang; Xia, Jiang; Yu, Guangrong
2017-01-01
Purpose. To investigate the effect of cuboid osteotomy lateral column lengthening (LCL) for the correction of stage II B adult-acquired flatfoot deformity in cadaver. Methods. Six cadaver specimens were loaded to 350 N. Flatfoot models were established and each was evaluated radiographically and pedobarographically in the following conditions: (1) intact foot, (2) flatfoot, and (3) cuboid osteotomy LCL (2, 3, 4, and 5 mm). Results. Compared with the flatfoot model, the LCLs showed significant correction of talonavicular coverage on anteroposterior radiographs and talus-first metatarsal angle on both anteroposterior and lateral radiographs (p < .05). Compared with the intact foot, the above angles of the LCLs showed no significant difference except the 2 mm LCL. In terms of forefoot pressure, medial pressure of the 2 mm LCL (p = .044) and lateral pressure of the 3, 4, and 5 mm LCLs showed statistical differences (p < .05), but lateral pressure of the 3 mm LCL was not more than the intact foot as compared to the 4 and 5 mm LCLs, which was less than medial pressure. Conclusion. Cuboid osteotomy LCL procedure avoids damage to subtalar joint and has a good effect on correction of stage II B adult-acquired flatfoot deformity with a 3 mm lengthening in cadavers. PMID:28497049
Distal femoral osteotomy in genovalgum: internal fixation with blade plate versus casting.
Makhmalbaf, Hadi; Moradi, Ali; Ganji, Saeid
2014-10-01
To compare the results of two different ways of distal femoral osteotomy stabilization in patients suffering from genuvalgum: internal fixation with plate, and casting. In a non-randomized prospective study, after distal femoral osteotomy with the zigzag method, patients were divided into two groups: long leg casting, and internal fixation with blade plate. For all patients, questionnaires were filled to obtain data. Information such as range of motion, tibiofemoral anatomical angle and complications were recorded. 38 knees with valgus deformity underwent distal femoral supracondylar osteotomy. (8 with plaster cast and 30 with internal fixation using a blade plate). Preoperative range of motion was 129±6° and six months later it was 120±14°. The preoperative tibiofemoral angle was 32±6°; postoperative tibiofemoral angles were 3±3°, 6±2°, and 7±3° just after operation, six months, and two years later, respectively. Although this angle was greater among the group stabilized with a cast, this difference was not statistically significant. In postoperative complications, over-correction was found in five, recorvatom deformity in one, knee stiffness in three and superficial wound infection was recorded in three knees. There is no prominent difference in final range of motion and alignment whether fixation is done with casting or internal fixation. However, the complication rate seems higher in the casting method.
Ferner, Felix; Dickschas, Joerg; Ostertag, Helmut; Poske, Ulrich; Schwitulla, Judith; Harrer, Joerg; Strecker, Wolf
2016-01-01
Medial open-wedge high tibial osteotomy (MOWHTO) is an established method to treat unicompartimental osteoarthritis of the knee joint. However, augmentation of the created tibial gap after osteotomy is controversially discussed. We performed a prospective investigation of 49 consecutive cases of MOWHTO at our department. Patients were divided into two groups: group A consisted of 19 patients while group B consisted of 30 patients. In group A, the augmentation of the opening gap after osteotomy was filled with a synthetic bone graft, whereas group B received no augmentation. As an indicator for bone healing we investigated the non-union rate in our study population and compared the non-union-rate between the two groups. The non-union rate was 28% in group A (five of 19 patients had to undergo revision) which received synthetic augmentation, while it was 3.3% in group B (one of 30 patients had to undergo revision) which received no augmentation. The difference between the groups was statistically significant (p-value 0.027). With regard to bone healing after MOWHTO, synthetic augmentation was not superior to no augmentation in terms of non-union rates after surgery. In fact, we registered a significantly higher rate of non-union after augmentation with synthetic bone graft. III. Copyright © 2015 Elsevier B.V. All rights reserved.
Usefulness of an Osteotomy Template for Skull Tumorectomy and Simultaneous Skull Reconstruction.
Oji, Tomito; Sakamoto, Yoshiaki; Miwa, Tomoru; Nakagawa, Yu; Yoshida, Kazunari; Kishi, Kazuo
2016-09-01
Simultaneous tumor resection and cranioplasty with hydroxyapatite osteosynthesis are sometimes necessary in patients of skull neoplasms or skull-invasive tumors. However, the disadvantage of simultaneous surgery is that mismatches often occur between the skull defect and the hydroxyapatite implant. To solve this problem, the authors developed a customized template for designing the craniotomy line. Before each operation, the craniotomy design was discussed with a neurosurgeon. Based on the discussion, 2 hydroxyapatite implants were customized for each patient on the basis of models prepared using computed tomography data. The first implant was an onlay template for the preoperative cranium, which was customized for designing the osteotomy line. The other implant was used for the skull defect. Using the template, the osteotomy line was drawn along the template edge, osteotomy was performed along this line, and the implant was placed in the skull defect. This technique was performed in 3 patients. No implant or defect trimming was required in any patient, good cosmetic outcomes were noted in all patients, and no complications occurred. Use of predesigned hydroxyapatite templates for craniotomy during simultaneous skull tumor resection and cranioplasty has some clinical advantages: the precise craniotomy line can be designed, the implant and skull defect fit better and show effective osteoconduction, trimming of the implant or defect is minimized, and the operation time is shortened.
Badie, Fateme; Katouzian, Hamid Reza; Rostami, Mostafa
2018-06-18
The varus knee has been defined as a Hip-Knee-Ankle alignment of less than 180 degrees. Varus knee alignment increases the load on the medial knee and also the risk of osteoarthritis. High tibial osteotomy has been designed to modify the malalignment of varus knee. The aim of this study was to investigate the osteotomy effects on knee adduction moment (KAM) and contact forces using a musculoskeletal and subject-specific knee model. A patient with varus knee and no symptoms of any other disease or disability participated in this study. The geometry of the multibody knee model has been modified using MR images. The solutions of its finite element model have been used to determine the parameters of the multibody model. The motion data, ground reaction force and kinetic data have been applied to run the subject-specific musculoskeletal model during the stance phase of gait. After osteotomy, the adduction moment decreased, where the maximum values are comparable to other studies. The pattern of KAM did not witness any significant changes. The total and medial contact forces reduced considerably after surgery, but the lateral contact force did not significantly change. The changes in total and medial contact forces and lack of change in lateral contact force could be explained by modification of the gait pattern after surgery.
Apipan, B; Rummasak, D; Narainthonsaenee, T
2018-05-01
The purpose of this study was to compare the effects of three dosage regimens of intravenous tranexamic acid and normal saline placebo on blood loss and the requirement for transfusion during bimaxillary osteotomy. A prospective, randomized, double-blind, placebo-controlled study was performed. Eighty patients scheduled for elective bimaxillary osteotomy were divided into four groups: a placebo group and three groups receiving a single dose of tranexamic acid 10, 15, or 20mg/kg body weight after the induction of anaesthesia. Demographic data, the anaesthetic time, the operative time, and the experience of the surgical team were similar in the four groups. Patients receiving placebo had increased blood loss compared to those receiving tranexamic acid. No significant difference in blood loss was found among those who received 10, 15, or 20mg/kg body weight of tranexamic acid. There was no significant difference in transfusion requirement, amount of 24-h postoperative vacuum drainage, length of hospital stay, or complications among the four groups. Prophylactic tranexamic acid decreased bleeding during bimaxillary osteotomy. Of the three dosages of tranexamic acid studied, the most efficacious and cost-effective dose to reduce bleeding was 10mg/kg body weight. Copyright © 2017 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.
Kieves, N R; MacKay, C S; Adducci, K; Rao, S; Goh, C; Palmer, R H; Duerr, F M
2015-01-01
To evaluate the influence of shock wave therapy (SWT) on radiographic evidence of bone healing after tibial plateau leveling osteotomy (TPLO). Healthy dogs between two to nine years of age that underwent TPLO were randomly assigned to receive either electro-hydraulic SWT (1,000 shocks) or sham treatment (SHAM). Treatment or SHAM was administered to the osteotomy site immediately postoperatively and two weeks postoperatively. Three blinded radiologists evaluated orthogonal radiographs performed eight weeks postoperatively with both a 5-point and a 10-point bone healing scale. Linear regression analysis was used to compare median healing scores between groups. Forty-two dogs (50 stifles) were included in the statistical analysis. No major complications were observed and all osteotomies healed uneventfully. The median healing scores were significantly higher at eight weeks postoperatively for the SWT group compared to the SHAM group for the 10-point (p <0.0002) and 5-point scoring systems (p <0.0001). Shock wave therapy applied immediately and two weeks postoperatively led to more advanced bone healing at the eight week time point in this study population. The results of this study support the use of electro-hydraulic SWT as a means of accelerating acute bone healing of canine osteotomies. Additional studies are needed to evaluate its use for acceleration of bone healing following fracture, or with delayed union.
The role of Weil and triple Weil osteotomies in the treatment of propulsive metatarsalgia.
Pérez-Muñoz, Israel; Escobar-Antón, David; Sanz-Gómez, Tomás Angel
2012-06-01
The Weil and triple Weil osteotomy are widely used to treat third rocker metatarsalgia. The aim of this study was to analyze the results and complications of Weil and triple Weil osteotomy used for the treatment of third rocker metatarsalgia. This is a report of 82 patients who were operated due to third rocker metatarsalgia from March 2004 to May 2007. A total of 76 completed the study, 68 women and eight men, with a total of 93 operated feet, 52 right and 41 left ( 17 bilateral). The clinical results were evaluated using the AOFAS score for the assessment of lesser metatarsals and interphalangeal joints, and weightbearing lateral and AP foot X-ray for radiological evaluation. The median AOFAS score was 90 (range, 34 to 100). We had good results in 80% and unsatisfactory in 20%. Prior to surgery 75 feet were index minus, but after all 81 feet were plus-minus. With regard to complications, we had serious recurrence of metatarsalgia in 4.3%, moderate stiffness in 60.2% (severe in one case), floating toes in 4.3% and delays in bone healing in 7.5%. We believe that Weil and triple Weil osteotomies are effective procedures in the treatment of third rocker metatarsalgia. We feel preoperative planning with tracing on the weightbearing AP radiographs is an essential step.
Jo, Dae-Jean; Kim, Yong-Sang; Kim, Sung-Min; Kim, Ki-Tack; Seo, Eun-Min
2015-10-01
Most thoracolumbar fractures have a good healing outcome with adequate treatment. However, posttraumatic thoracolumbar kyphosis can occur in a proportion of thoracolumbar fractures after inappropriate treatment, osteoporosis, or osteonecrosis of the vertebral body. There are several surgical options to correct posttraumatic thoracolumbar kyphosis, including anterior, posterior, and combined approaches, which are associated with varying degrees of success. The aim of this study was to assess the use of a modified closing wedge osteotomy for the treatment of posttraumatic thoracolumbar kyphosis and to evaluate the radiographic findings and clinical outcomes of patients treated using this technique. Thirteen consecutive patients with symptomatic posttraumatic thoracolumbar kyphosis were treated using a modified closing wedge osteotomy. The mean patient age was 62 years. The kyphosis apex ranged from T-10 to L-2. The sagittal alignment, kyphotic angle, neurological function, visual analog scale for back pain, and Oswestry Disability Index were evaluated before surgery and at follow-up. RESULTS The mean preoperative regional angle was 27.4°, and the mean correction angle was 29.6°. Sagittal alignment improved with a mean correction rate of 58.3%. The mean surgical time was 275 minutes, and the mean intraoperative blood loss was 1585 ml. The intraoperative complications included 2 dural tears, 1 nerve root injury, and 1 superficial wound infection. The mean visual analog scale score for back pain improved from 6. 6 to 2, and the Oswestry Disability Index score decreased from 55.4 to 22.6 at the last follow-up. All patients achieved bony anterior fusion based on the presence of trabecular bone bridging at the osteotomy site. The modified posterior closing wedge osteotomy technique achieves satisfactory kyphosis correction with direct visualization of the circumferentially decompressed spinal cord, as well as good fusion with less blood loss and fewer complications. It is an alternative method for treating patients with posttraumatic thoracolumbar kyphosis.
Lechler, Philipp; Feldmann, Christine; Köck, Franz Xaver; Schaumburger, Jens; Grifka, Joachim; Handel, Martin
2012-01-01
Hallux valgus is a frequent condition of the forefoot, resulting in cosmetic deformity and pain. Chevron osteotomy (CO) is widely employed for the treatment of hallux valgus. Chevron-Akin double osteotomy (CAO) was previously described and superiority over an isolated Chevron procedure was assumed. The objective of this study was to compare the short-to-middle term outcomes of CO and CAO. This study included 72 patients with established diagnosis of mild-to-moderate hallux valgus, treated by either isolated CO or CAO. The CO group included 46 patients (mean 51.5 years) with a mean hallux valgus angle of 27°, while the CAO group included 26 subjects (mean 53.1 years) and a mean hallux valgus angle of 32° preoperatively. All patients were reviewed by physical examination, and standardized questionnaire, and pre- and postoperative standing X-rays were performed. Matched group analysis was carried out to analyze statistical differences of both techniques. The patients were assessed and group matched at a mean of 1.37 years for the CO group and 1.04 years for the CAO group, postoperatively. Mean improvement of HVA (hallux valgus angle) was 10.6° in the CO group and the CAO group improved by 17.5°. DMAA (distal metatarsal articular angle) improved in the CO group by 5.4° and in the CAO by 13.7°. Mean AOFAS score improved by 27.9 (CO) and 21.5 (CAO). Patient satisfaction was high in both groups, with a tendency towards higher values within the CAO group. These findings indicate that Chevron-Akin double osteotomy is a save and practicable procedure for the treatment of mild-to-moderate hallux valgus. Superiority of combined Chevron-Akin procedure over an isolated Chevron osteotomy might be limited to distinct clinical settings, but should not be generally assumed.
Chen, Xue-Qiang; Wu, Qun-Feng; Dong, Wei-Qin; Yu, Li-Xin; Li, Xiong-Feng
2018-03-25
To explore clinical effect of modified Chevron osteotomy combined with lateral tissue loosening for the treatment of mild-moderate hallux valgus through internal signal approach. From July 2015 to June 2016, 26 patients with mild-moderate hallux valgus treated with modified Chevron osteotomy combined with lateral tissue loosening through internal signal approach, including 2 males and 24 females aged from 45 to 65 years old with an average of(54.6±4.8) years old;the courses of diseases ranged from 1 to 5 months with an average of (7.5±3.3) months. Hallux valgus angle(HVA), inter metatarsal angle(IMA) were measured at 12 months after operation, and AOFAS score was applied to evaluate clinical effect before and after operation. All incisions were healed at stage I. No incision occurred infection, metatarsal necrosis and recurrence of hallux valgus deformity. Two patients occurred skin numbness caused by musculocutaneous nerve injury. Twenty-six patients were followed up from 6 to 12 months with an average of(9.12±2.06) months. HVA, IMA were(30.01±3.71)°, (14.00±1.50)° before operation and(9.41±4.16)°, (7.00±0.60)° after operation, which had significant difference. There was statistical significance in AOFAS score before operation 54.77±9.59 and after operation 92.73±5.47, and 19 cases obtained excellent results and 7 moderate. Modified Chevron osteotomy combined with full thread headless pressure screw fixation and lateral tissue loosening for the treatment of mild-moderate hallux valgus has advantages of excellent exposure, simple operation, stable fixation, rapid recovery. Akin osteotomy with internal capsulorrhaphy were used with lateral loosening and could recover soft tissue balance between lateral and internal, and could receive satisfied clinical effects. Copyright© 2018 by the China Journal of Orthopaedics and Traumatology Press.
Steinböck, G
1996-08-01
From 1983 to 1995, 1587 patients suffering from hallux abductovalgus were treated with the Austin bunionectomy. The operation consists of a medial exostosis removal, a V-shaped laterally directed displacement osteotomy of the metatarsal head, lateral release and medial reefing of the capsulo-ligamentous structures. Lateral transposition is facilitated by performing a sufficient lateral release consisting of dissection of the lateral metatarsophalangeal ligament and separation of the adductor tendon from the base of the phalanx and the lateral sesamoid. In the case of intermetatarsal angles greater than 15 degrees, the metatarsal-sesamoid ligament is also severed just above the lateral sesamoid. The periosteum is stripped in a limited fashion dorsally and toward the plantar, leaving its insertion at the metatarsal head intact. After this procedure, reposition of the metatarsal head onto the sesamoids is usually possible and is maintained by reconstruction of the medial metatarsal-sesamoid ligament. In the author's own research material, metatarsophalangeal angles larger than 50 degrees and intermetatarsal angles of over 20 degrees could be corrected. Pronation of the toe is usually corrected by tenotomy of the abductor tendon near the base of the phalanx. Avascular necrosis is extremely rare with a careful operative technique. In our extensive research material, four cases of AVN were recognized. Provided there is free motion of the joint (60-0-20), mild radiological signs of osteoarthritis are no contraindication for the operation. Even in the aged, good results can be achieved provided there are no trophic problems. The Austin bunionectomy has proved to be a versatile method for treating bunion problems. The possibility of transposing the metatarsal head laterally, toward the plantar, proximally and distally by altering the direction of the osteotomy, as well as tilting it medially or laterally, has made this osteotomy an invaluable tool for addressing various problems in bunion surgery.
Patellofemoral dysbalance and genua valga: outcome after femoral varisation osteotomies.
Dickschas, Jörg; Ferner, Felix; Lutter, Christoph; Gelse, Kolja; Harrer, Jörg; Strecker, Wolf
2018-01-01
Patellofemoral dysbalance may be caused by trochlear dysplasia, an elevated TTTG distance, femoral or tibial torsional deformities, patella alta, or a genu valgum. The surgical procedure for the treatment of a genu valgum is varisation osteotomy, usually in the femoral aspect. Several authors believe that a genu valgum is one cause of patellofemoral dysbalance, but studies about the outcome of the treatment with a varisation osteotomy are rare. Nineteen knees in 18 patients, aged on average 28 (16-52) years were investigated in a retrospective study. The patients had symptoms of patellofemoral instability or anterior knee pain due to a genu valgum, without symptoms of a lateral femorotibial compartment. All patients underwent a femoral varisation osteotomy. The diagnostic investigation prior to surgery included full-leg radiographs and torsional angle CT scans. The pre-surgery and follow-up investigation included the visual analog scale (VAS), the Kujala score, the Japanese Knee Society score, the Lysholm score. The mean duration of follow-up was 44(10-132) months. The mean preoperative mechanical valgus was 5.6° (range 4-10°). Twelve patients mentioned patellar instability as the main symptom while 14 mentioned anterior knee pain. No redislocation occurred in the follow-up period. Anterior knee pain on the VAS (p value < 0.001) was significantly reduced (5.6-2.1). The Japanese Knee Society score improved from 87 to 93 (p value 0.013) points, the Kujala score improved significantly from 72 to 87 (p value 0.009), and the Lysholm score significantly from 76 to 92 (p value < 0.001). Genua valga can lead to patellofemoral dysbalance, treatment of this condition is femoral varisation osteotomy. In this study, patellofemoral stability was achieved and anterior knee pain was significantly reduced. Significant improvements in clinical scores proved the success of the treatment. IV, case series.
Lee, Yong Seuk; Lee, Sang Bok; Oh, Won Seok; Kwon, Yong Eok; Lee, Beom Koo
2016-01-01
The objectives of this study were (1) to evaluate the clinical and radiologic outcomes of open-wedge high tibial osteotomy focusing on patellofemoral alignment and (2) to search for correlation between variables and patellofemoral malalignment. A total of 46 knees (46 patients) from 32 females and 14 males who underwent open-wedge high tibial osteotomy were included in this retrospective case series. Outcomes were evaluated using clinical scales and radiologic parameters at the last follow-up. Pre-operative and final follow-up values were compared for the outcome analysis. For the focused analysis of the patellofemoral joint, correlation analyses between patellofemoral variables and pre- and post-operative weight-bearing line (WBL), clinical score, posterior slope, Blackburn Peel ratio, lateral patellar tilt, lateral patellar shift, and congruence angle were performed. The minimum follow-up period was 2 years and median follow-up period was 44 months (range 24-88 months). The percentage of weight-bearing line was shifted from 17.2 ± 11.1 to 56.7 ± 12.7%, and it was statistically significant (p < 0.01). Regarding the clinical results, statistical significance was observed using all scores (p < 0.01). In the radiologic evaluation, patellar descent was observed with statistical significance (p < 0.01). Last follow-up lateral patellar tilt was decreased with statistical significance (p < 0.01). In correlation analysis between variables of patellofemoral malalignment, the pre-operative weight-bearing line showed an association with the change in lateral patellar tilt and lateral patellar shift (correlation coefficient: 0.3). After open-wedge high tibial osteotomy, clinical results showed improvement, compared to pre-operative values. The patellar tilt and lateral patellar shift were not changed; however, descent of the patella was observed. Therefore, mild patellofemoral problems should not be a contraindication of the open-wedge high tibial osteotomy. Case series, Level IV.
van Bakelen, N. B.; Vermeulen, K. M.; Buijs, G. J.; Jansma, J.; de Visscher, J. G. A. M.; Hoppenreijs, Th. J. M.; Bergsma, J. E.; Stegenga, B.; Bos, R. R. M.
2015-01-01
Background Biodegradable fixation systems could reduce/delete the problems associated with titanium plate removal. This means less surgical discomfort, and a reduction in costs. Aim The aim of the present study was to compare the cost-effectiveness between a biodegradable and a titanium system in Maxillofacial surgery. Materials and Methods This multicenter RCT was performed in the Netherlands from December 2006 to July 2009. Included were 230 patients who underwent a bilateral sagittal split osteotomy (BSSO), a Le Fort-I osteotomy, or a bi-maxillary osteotomy and those treated for fractures of the mandible, maxilla, or zygoma. The patients were randomly assigned to a titanium group (KLS Martin) or to a biodegradable group (Inion CPS). Costs were assessed from a societal perspective. Health outcomes in the incremental cost-effectiveness ratio (ICER) were bone healing (8 weeks) and plate removal (2 years). Results In 25 out of the 117 patients who were randomized to the biodegradable group, the maxillofacial surgeon made the decision to switch to the titanium system intra-operatively. This resulted in an Intention-To-Treat (ITT-)analysis and a Treatment-Received (TR-) analysis. Both analyses indicated that operations performed with titanium plates and screws had better health outcomes. In the TR-analysis the costs were lower in the biodegradable group, in the ITT-analysis costs were lower in the titanium group. Conclusion and Discussion The difference in costs between the ITT and the TR analyses can be explained by the intra-operative switches: In the TR-analysis the switches were analysed in the titanium group. In the ITT-analysis they were analysed in the biodegradable group. Considering the cost-effectiveness the titanium system is preferable to the biodegradable system in the regular treatment spectrum of mandibular, Le Fort-I, and zygomatic fractures, and BSSO’s, Le Fort-I osteotomies and bimaxillary osteotomies. Trial Registration Controlled-Trials.com ISRCTN 44212338 PMID:26192813
A Cost-Effective, In-House, Positioning and Cutting Guide System for Orthognathic Surgery.
McAllister, Peter; Watson, Melanie; Burke, Ezra
2018-03-01
Technological advances in 3D printing can dramatically improve orthognathic surgical planning workflow. Custom positioning and cutting guides enable intraoperative reproduction of pre-planned osteotomy cuts and can result in greater surgical accuracy and patient safety. This short paper describes the use of freeware (some with open-source) combined with in-house 3D printing facilities to produce reliable, affordable osteotomy cutting guides. Open-source software (3D Slicer) is used to visualise and segment three-dimensional planning models from imported conventional computed tomography (CT) scans. Freeware (Autodesk Meshmixer ©) allows digital manipulation of maxillary and mandibular components to plan precise osteotomy cuts. Bespoke cutting guides allow exact intraoperative positioning. These are printed in polylactic acid (PLA) using a fused-filament fabrication 3D printer. Fixation of the osteotomised segments is achieved using plating templates and four pre-adapted plates with planned screw holes over the thickest bone. We print maxilla/ mandible models with desired movements incorporated to use as a plating template. A 3D printer capable of reproducing a complete skull can be procured for £1000, with material costs in the region of £10 per case. Our production of models and guides typically takes less than 24 hours of total print time. The entire production process is frequently less than three days. Externally sourced models and guides cost significantly more, frequently encountering costs totalling £1500-£2000 for models and guides for a bimaxillary osteotomy. Three-dimensional guided surgical planning utilising custom cutting guides enables the surgeon to determine optimal orientation of osteotomy cuts and better predict the skeletal maxilla/mandible relationship following surgery. The learning curve to develop proficiency using planning software and printer settings is offset by increased surgical predictability and reduced theatre time, making this form of planning a worthy investment.
[Finite element study of maxillary Le Fort-I osteotomy with rigid internal fixation].
Zhou, Jian; Sun, Geng-Lin; Wu, Wei; Xu, Chong-Tao; Wang, Peng-Lin
2010-05-01
To study the biomechanical characteristic of maxillary Le fort- I osteotomy with rigid internal fixation (RIF) , so as to choose best fixation method. The 3-dimensional finite element models of maxillary Le Fort-I osteotomy with 9 kinds of RIF methods were established. Then the models were divided into three groups to calculate the stress distribution of the maxilla and the displacement of bone segment under 3 kinds of occlusion condition. The fixation stability of the different RIF methods was evaluated. Under the incisor occlusion condition, the stress of the cranio maxillary complex transmits mainly along the nasal-maxillary buttress. Under the premolar and molar occlusion condition, the stress transmits along the alveolar process first, then turns to the nasal-maxillary and zygomatic-maxillary buttress. The focused stress position of the internal fixation system is at the connection between the screws and the plate and at the plate near the osteotomy line. Under the premolar occlusion condition, the displacement of bone segment with different RIF methods was (in a decreasing order) 0.396509 mm (with bio-absorbable plate), 0.148393 mm (with micro-plate ), 0.078436 mm (with mini-plate) in group 1; 0.188791 mm (fixing at the nasal-maxillary buttress), 0.121718 mm (fixing at the zygomatic-maxillary buttress), 0.078436 mm (fixing at the both buttress) in group 2; 0.091023 mm (with straight plate), 0.078436 mm (with L shape plate), 0.072450 mm (with Y shape plate), 0.065617 mm (with T shape plate) in group 3. The fixation stability of using the bio-absorbable plate in Le Fort-I osteotomy is less stable than using the titanium plate. Fixing at the zygomatic-maxillary buttress is more stable than at the naso-maxillary buttress. The fixation stability is different by using different shapes of plates.
The Analysis of Risk Factors in No Thumb Test in Total Knee Arthroplasty
Kim, Jee Hyoung; Ko, Dong Oh; Yoo, Chang Wook; Chun, Tae Hwan; Lee, Jung Soo
2011-01-01
Background We would like to analyze the risk factors of no thumb test among knee alignment tests during total knee arthroplasty surgery. Methods The 156 cases of total knee arthroplasty by an operator from October 2009 to April 2010 were analyzed according to preoperative indicators including body weight, height, degree of varus deformity, and patella subluxation and surgical indicators such as pre-osteotomy patella thickness, degree of patella degeneration, no thumb test which was evaluated after medial prepatella incision and before bone resection (1st test), no thumb test which was evaluated with corrective valgus stress (2nd test, J test), and the kind of prosthesis. We comparatively analyzed indicators affecting no thumb test (3rd test). Results There was no relation between age, sex, and body weight and no thumb test (3rd test). Patellar sulcus angle (p = 0.795), patellar congruence angle (p = 0.276) and preoperative mechanical axis showed no relationship. The 1st no thumb test (p = 0.007) and 2nd test (p = 0.002) showed significant relation with the 3rd no thumb test. Among surgical indicators, pre-osteotomy patella thickness (p = 0.275) and degeneration of patella (p = 0.320) were not relevant but post-osteotomy patellar thickness (p = 0.002) was relevant to no thumb test (3rd test). According to prosthesis, there was no significance with Nexgen (p = 0.575). However, there was significant correlation between Scorpio (p = 0.011), Vanguard (p = 0.049) and no thumb test (3rd test). Especially, Scorpio had a tendency to dislocate the patella, but Vanguard to stabilize the patella. Conclusions No thumb test (3rd test) is correlated positively with 1st test, 2nd test, and post-osteotomy patella thickness. Therefore, the more patella osteotomy and the prosthesis with high affinity to patellofemoral alignment would be required for correct patella alignment. PMID:22162789
A systematic review of current osteoporotic metaphyseal fracture animal models.
Wong, R M Y; Choy, M H V; Li, M C M; Leung, K-S; K-H Chow, S; Cheung, W-H; Cheng, J C Y
2018-01-01
The treatment of osteoporotic fractures is a major challenge, and the enhancement of healing is critical as a major goal in modern fracture management. Most osteoporotic fractures occur at the metaphyseal bone region but few models exist and the healing is still poorly understood. A systematic review was conducted to identify and analyse the appropriateness of current osteoporotic metaphyseal fracture animal models. A literature search was performed on the Pubmed, Embase, and Web of Science databases, and relevant articles were selected. A total of 19 studies were included. Information on the animal, induction of osteoporosis, fracture technique, site and fixation, healing results, and utility of the model were extracted. Fracture techniques included drill hole defects (3 of 19), bone defects (3 of 19), partial osteotomy (1 of 19), and complete osteotomies (12 of 19). Drill hole models and incomplete osteotomy models are easy to perform and allow the study of therapeutic agents but do not represent the usual clinical setting. Additionally, biomaterials can be filled into drill hole defects for analysis. Complete osteotomy models are most commonly used and are best suited for the investigation of therapeutic drugs or noninvasive interventions. The metaphyseal defect models allow the study of biomaterials, which are associated with complex and comminuted osteoporotic fractures. For a clinically relevant model, we propose that an animal model should satisfy the following criteria to study osteoporotic fracture healing: 1) induction of osteoporosis, 2) complete osteotomy or defect at the metaphysis unilaterally, and 3) internal fixation. Cite this article : R. M. Y. Wong, M. H. V. Choy, M. C. M. Li, K-S. Leung, S. K-H. Chow, W-H. Cheung, J. C. Y. Cheng. A systematic review of current osteoporotic metaphyseal fracture animal models. Bone Joint Res 2018;7:6-11. DOI: 10.1302/2046-3758.71.BJR-2016-0334.R2. © 2018 Wong et al.
Segaren, N; Abdul-Jabar, H B; Hashemi-Nejad, A
2014-08-01
Proximal femoral varus osteotomy improves the biomechanics of the hip and can stimulate normal acetabular development in a dysplastic hip. Medial closing wedge osteotomy remains the most popular technique, but is associated with shortening of the ipsilateral femur. We produced a trigonometric formula which may be used pre-operatively to predict the resultant leg length discrepancy (LLD). We retrospectively examined the influence of the choice of angle in a closing wedge femoral osteotomy on LLD in 120 patients (135 osteotomies, 53% male, mean age six years, (3 to 21), 96% caucasian) over a 15-year period (1998 to 2013). A total of 16 of these patients were excluded due to under or over varus correction. The patients were divided into three age groups: paediatric (< 10 years), adolescent (10 to 16 years) and adult (> 16 years). When using the same saw blades as in this series, the results indicated that for each 10° of angle of resection the resultant LLD equates approximately to multiples of 4 mm, 8 mm and 12 mm in the three age groups, respectively. Statistical testing of the 59 patients who had a complete set of pre- and post-operative standing long leg radiographs, revealed a Pearson's correlation coefficient for predicted versus radiologically observed shortening when using a wedge of either 10° or 20° of 0.93 (p < 0.001). The 95% limits of agreement from the Bland-Altman analysis for this subgroup were -3.5 mm to +3.3 mm. It has been accepted that a 10 mm discrepancy is clinically acceptable. This study identified a geometric model that provided satisfactory accuracy when using specific saw blades of known thicknesses for this formula to be used in clinical practice. ©2014 The British Editorial Society of Bone & Joint Surgery.
[CORRECTION OF VARUS KNEE WITH REDUCTION OSTEOTOMY DURING TOTAL KNEE ARTHROPLASTY].
Su, Weiping; Xie, Jie; Li, Mingqing; Zeng, Min; Lei, Pengfei; Wang, Long; Hu, Yihe
2015-12-01
To evaluate the effectiveness of reduction osteotomy for correction of varus knee during total knee arthroplasty. A retrospective analysis was made on the clinical data of 16 patients (24 knees) who received reduction osteotomy for correcting varus knee during total knee arthroplasty between May 2010 and July 2012. There were 2 males (3 knees) and 14 females (21 knees), with an average age of 67 years (range, 57-79 years). The disease duration ranged from 3 to 15 years (mean, 9.1 years). The Knee Society Score (KSS) was 38.71 ± 10.04 for clinical score and 50.31 ± 14.31 for functional score. The range of motion (ROM) of the knee was (91.88 ± 13.01). The tibiofemoral angle was (9.04 ± 4.53)° of varus deformity. Reduction osteotomy was applied to correct varus knee. The operation time was 85-245 minutes (mean, 165.5 minutes); the obvious blood loss was 10-800 mL (mean, 183.1 mL); the hospitalization time was 8-22 days (mean, 13.6 days). All incisions healed by first intention. No neurovascular injury or patellar fracture occurred. The follow-up duration ranged from 37 to 62 months (mean, 48 months). The tibiofemoral angle was corrected to (3.92 ± 1.89)° of valgus at 48 hours after operation. The lower limb alignment recovered to normal. The X-ray films showed no evidence of obvious radiolucent line, osteolysis, or prosthesis subsidence. The results of KSS were significantly improved to 84.21 ± 6.49 for clinical score and 85.31 ± 6.95 for functional score (t = 20.665, P = 0.000; t = 9.585, P = 0.000); and ROM of the knee was significantly increased to (105.83 ± 11.29)° (t = 8.333, P = 0.000) at last follow-up. The effectiveness of reduction osteotomy for varus knee deformity during total knee arthroplasty is satisfactory. Proper alignment, ROM, and function of knee can be achieved.
Temporalis myofascial flap transfer into the oral cavity without zygomatic arch osteotomy
Tauro, David P.; Mishra, Madan; Singh, Gaurav
2013-01-01
Among plethora of options, the temporalis myofascial flap remains a workhorse for the maxillofacial reconstruction. The inherent advantages include reliable vascularity, adequate size, and proximity to the defect. Although contemporary surgical techniques provide fair surgical results with low rate of complications, their intraoral transposition involve additional surgical trauma by intentional fracturing of the zygomatic arch. We have proposed herein a simpler technique of temporalis myofascial flap transposition into the oral cavity without zygomatic arch osteotomy. PMID:24665182
Skiak, Eyad; Karakasli, Ahmet; Basci, Onur; Satoglu, Ismail S; Ertem, Fatih; Havitcioglu, Hasan
2015-09-01
Patients with cerebral palsy (CP) disorder often develop rotational hip deformity. Increasing deformities impair already diminished walking abilities; femoral osteotomies are often performed to maintain and improve walking abilities. Fixation of osteotomies with condylar plates has been used successfully, but does not often enable immediate postoperative full weight-bearing. To avoid considerable postoperative rehabilitation deficit and additional bone loss because of inactivity, a postoperative treatment with full weight-bearing, is therefore, desirable. Self-tapping Schanz screws with a unilateral external fixator crossing the knee joint providing stronger anchoring in osteopenic bone might fulfill these demands. A retrospective study was carried out on 27 ambulatory CP patients, mean age 17.5 years (range 9-22 years); 11 patients with bilateral severe intoeing deformities underwent a supracondylar femoral osteotomy between September 2008 and April 2012. All patients were allowed to bear their full weight postoperatively. The aim of this study was to describe the technique, the results of this technique, to evaluate the time required for bone healing, and the type of complications associated with a distal derotational femoral osteotomy fixed with a uniaxial external fixator crossing the knee joint. A total of 27 patients were studied [mean weight 48.8 kg (range 29.8-75 kg)]. The mean preoperative rotation included internal rotation of 69° and external rotation of 17°. All patients were evaluated clinically and radiographically for a minimum of 1 year after surgery. There was a significant decrease in the mean medial rotation from 69° to 32° (P=0.00034). The lateral rotation increased significantly from preoperative 17° to postoperative 45° (P=0.0011). The femoral anteversion decreased significantly from a mean of 55° preoperatively to a mean 17° postoperatively (P=0.030). All patients, except one, achieved solid fusion uneventfully. One patient was a 16-year-old female who had sustained a knee flexion contracture of 30° because of a delay in the physiotherapy program. One 13-year-old female patient with a bilateral osteotomy had a nondisplaced fracture in her right femur after a direct trauma 2 weeks after removal of an external fixator, and was treated by a cast. Another 17-year-old male patient developed a nonunion because of loosening of two pins and achieved solid union after revision by dynamic compression plate plating. Besides four cases with superficial pin-tract infection, no other complications were documented. Minimally invasive supracondylar femoral derotational osteotomy fixed with a unilateral external fixators crossing the knee joint is a reliable procedure in CP patients. Most patients can be treated with early postoperative full weight-bearing. However, removal of the knee joint crossing fixator should be performed as early as possible to achieve a full range of motion.
Arnold, Heino; Stukenborg-Colsman, Christina; Hurschler, Christof; Seehaus, Frank; Bobrowitsch, Evgenij; Waizy, Hazibullah
2012-01-01
The aim of this study was to examine resistance to angulation and displacement of the internal fixation of a proximal first metatarsal lateral displacement osteotomy, using a locking plate system compared with a conventional crossed screw fixation. Seven anatomical human specimens were tested. Each specimen was tested with a locking screw plate as well as a crossed cancellous srew fixation. The statistical analysis was performed by the Friedman test. The level of significance was p = 0.05. We found larger stability about all three axes of movement analyzed for the PLATE than the crossed screws osteosynthesis (CSO). The Friedman test showed statistical significance at a level of p = 0.05 for all groups and both translational and rotational movements. The results of our study confirm that the fixation of the lateral proximal first metatarsal displacement osteotomy with a locking plate fixation is a technically simple procedure of superior stability.
Arnold, Heino; Stukenborg-Colsman, Christina; Hurschler, Christof; Seehaus, Frank; Bobrowitsch, Evgenij; Waizy, Hazibullah
2012-01-01
Introduction: The aim of this study was to examine resistance to angulation and displacement of the internal fixation of a proximal first metatarsal lateral displacement osteotomy, using a locking plate system compared with a conventional crossed screw fixation. Materials and Methodology: Seven anatomical human specimens were tested. Each specimen was tested with a locking screw plate as well as a crossed cancellous srew fixation. The statistical analysis was performed by the Friedman test. The level of significance was p = 0.05. Results: We found larger stability about all three axes of movement analyzed for the PLATE than the crossed screws osteosynthesis (CSO). The Friedman test showed statistical significance at a level of p = 0.05 for all groups and both translational and rotational movements. Conclusion: The results of our study confirm that the fixation of the lateral proximal first metatarsal displacement osteotomy with a locking plate fixation is a technically simple procedure of superior stability. PMID:22675409
Lima, Cristina Jardelino de; Falci, Saulo Gabriel Moreira; Rodrigues, Danillo Costa; Marchiori, Érica Cristina; Moreira, Roger Willian Fernandes
2015-12-01
The aim of the present study was to use mechanical and photoelastic tests to compare the performance of cannulated screws with solid-core screws in sagittal split osteotomy fixation. Ten polyurethane mandibles, with a prefabricated sagittal split ramus osteotomy, were fixed with an L inverted technique and allocated to each group as follows: cannulated screw group (CSG), fixed with three 2.3-cannulated screws; and solid-core screw group (SCSG), fixed with three 2.3-solid-core screws. Vertical linear loading tests were performed. The differences between mean values were analyzed through T test for independent samples. The photoelastic test was carried out using a polariscope. The results revealed differences between the two groups only at 1 mm of displacement, in which the cannulated-screw revealed more resistance. Photoelastic test showed higher stress concentration close to mandibular branch in the solid-core group. Cannulated screws performed better than solid-core ones in a mechanical test at 1-mm displacement and photoelastic tests.
Fiz, Nicolás; Delgado, Diego; Sánchez, Xabier; Sánchez, Pello; Bilbao, Ane Miren; Oraa, Jaime; Sánchez, Mikel
2017-10-01
In some surgical techniques like femoral derotation osteotomy, accuracy is a key factor that often is not optimal because of the lack of appropriate technology. 3D printing is emerging in many professional areas and its use in the medical field may enhance the results of certain surgeries. This case describes a patient who underwent an intramedullary nail fixation to treat a femoral shaft fracture. After nine months, the patient presented hip pain and "in toe" walking caused by a malrotation produced during the surgery. To address the consequent femoral derotation osteotomy, 3D technology was used throughout the whole process. A 3D model of the patient's femur was created to conduct a real and accuracy assessment of femoral anteversion. Then, a customized surgical guide was designed and printed to ensure the proper alignment during surgery. Given the success of this surgery, 3D printing can be considered a quick and inexpensive tool to improve surgical results.
Berger, Moritz; Nova, Igor; Kallus, Sebastian; Ristow, Oliver; Eisenmann, Urs; Freudlsperger, Christian; Seeberger, Robin; Hoffmann, Jürgen; Dickhaus, Hartmut
2017-03-01
Inaccuracies in orthognathic surgery can be caused during face-bow registration, model surgery on plaster models, and intermaxillary splint manufacturing. Electromagnetic (EM) navigation is a promising method for splintless digitized maxillary positioning. After performing Le Fort I osteotomy on 10 plastic skulls, the target position of the maxilla was guided by an EM navigation system. Specially implemented software illustrated the target position by real-time multistage colored three-dimensional imaging. Accuracy was determined by using pre- and postoperative cone beam computed tomography. The high accuracy of the EM system was underlined by the fact that it had a navigated maxilla position discrepancy of only 0.4 mm, which was verified by postoperative cone beam computed tomography. This preclinical study demonstrates a precise digitized approach for splintless maxillary repositioning after Le Fort I osteotomy. The accuracy and intuitive illustration of the introduced EM navigation system is promising for potential daily use in orthognathic surgery. Copyright © 2016 Elsevier Inc. All rights reserved.
Akman, Yunus Emre; Yavuz, Umut; Çetinkaya, Engin; Gür, Volkan; Gül, Murat; Demir, Bilal
2018-03-01
We report the short-term outcomes of total hip arthroplasty(THA) in patients previously treated with Schanz osteotomy (SO). Eighteen patients [2 male, 16 female; mean age, 55.4 (range, 50-66) years] who had undergone THA after SO were retrospectively evaluated. Clinical evaluation was performed based on the Harris hip score. Radiological evaluation was performed using full-length radiographs of the lower extremities, pelvis, and hip. The mean follow-up period was 30.8 (range, 18-56) months. Mean femoral shortening was 3.7 (range, 2-5) cm. Perioperative complications occurred in 4 (22.2%) patients. Nonunion was not found at the osteotomy sites. No dislocation was observed. The Trendelenburg sign was positive for five (27.7%) patients, postoperatively. The mean Harris hip score improved from 42.7 to 78.7 (p < 0.05). THA for hips previously treated with SO is technically demanding. If careful preoperative planning is performed, successful treatment can be achieved.
Frosch, K-H; Krause, M; Frings, J; Drenck, T; Akoto, R; Müller, G; Madert, J
2016-10-01
Malreduction of tibial head fractures often leads to malalignment of the lower extremity, pain, limited range of motion and instability. The extent of the complaints and the degree of deformity requires an exact analysis and a standardized approach. True ligamentous instability should be distinguished from pseudoinstability of the joint. Also extra- and intra-articular deformities have to be differentiated. In intra-articular deformities the extent of articular surface displacement, defects and clefts must be accurately evaluated. A specific surgical approach is necessary, which allows adequate visualization, correct osteotomy and refixation of the fractured area of the tibial head. In the long-term course good clinical results are described for intra-articular osteotomies. If the joint is damaged to such an extent that it cannot be reconstructed or in cases of advanced posttraumatic osteoarthritis, total knee arthroplasty may be necessary; however, whenever possible and reasonable, anatomical reconstruction and preservation of the joint should be attempted.
The risk of revision in total knee arthroplasty is not affected by previous high tibial osteotomy
Badawy, Mona; Fenstad, Anne M; Indrekvam, Kari; Havelin, Leif I; Furnes, Ove
2015-01-01
Background and purpose — Previous studies have found different outcomes after revision of knee arthroplasties performed after high tibial osteotomy (HTO). We evaluated the risk of revision of total knee arthroplasty with or without previous HTO in a large registry material. Patients and methods — 31,077 primary TKAs were compared with 1,399 TKAs after HTO, using Kaplan-Meier 10-year survival percentages and adjusted Cox regression analysis. Results — The adjusted survival analyses showed similar survival in the 2 groups. The Kaplan-Meier 10-year survival was 93.8% in the primary TKA group and 92.6% in the TKA-post-HTO group. Adjusted RR was 0.97 (95% CI: 0.77–1.21; p = 0.8). Interpretation — In this registry-based study, previous high tibial osteotomy did not appear to compromise the results regarding risk of revision after total knee arthroplasty compared to primary knee arthroplasty. PMID:26058747
Surgical Management of Laterognathia in Orthofacial Surgery.
García Y Sánchez, J M; Gómez Rodríguez, C L; Romero Flores, J
2017-09-01
Each year around the world, various surgical procedures are carried out with the goal of correcting laterognathia; both the intraoral vertical ramus osteotomy (IVRO) and bilateral sagittal split ramus osteotomy (OSB) have been the most used techniques in mandibular surgery. These techniques have advantages and disadvantages; for example the advantages of the OSB include: increased coefficient of friction between bony segments, for both the forward and the retroposition, as well as decrease in the time of intermaxillary fixation (IMF). Disadvantages include injury to the inferior alveolar nerve (IAN), hemorrhage, bad split, among others. The advantages of IVRO include decrease of possibility of injury to the IAN, ease of implementation of the technique, a lower incidence of hemorrhage and the short duration of the surgical procedure. Their disadvantages include: lower coefficient of friction between bony segments, requires a relatively long period of IMF. The combination between the techniques of mandibular osteotomy for the correction of minor 10 mm laterognathia is the ideal treatment, since it avoids potential recurrence. We describe two cases of patients with laterognathia greater than 6 mm associated with maxilla deformity, which were treated with combined osteotomies. At Maxillofacial Surgery Service, Specialty Hospital, National Medical Center XXI Century, we describe the advantages and disadvantages, pre and postoperative nosocomial, by comparing them with the reports of the literature. The combination of techniques in the correction of laterognathias greater than 4 mm (smaller than 10 mm) is the ideal treatment, eliminating problems of articular compression, recurrence and damage to the alveolar nerve.
Stabilization of chevron bunionectomy with a capsuloperiosteal flap.
Guclu, Berk; Kaya, Alper; Akan, Burak; Koken, Murat; Kemal Us, Ali
2011-04-01
Distal chevron osteotomy (DCO) for mild to moderate hallux valgus deformity is inherently more stable than the other forms of distal metatarsal osteotomy, but complications such as loss of correction, infection, joint stiffness, delayed union, malunion and nonunion can occur. In this study, we evaluated the use of a capsuloperiosteal flap for stabilization of DCO in the treatment of hallux valgus. A retrospective study was conducted on 59 patients (88 feet) that underwent distal Chevron osteotomy stabilized only with a capsuloperiosteal flap for mild and moderate hallux valgus deformity with a mean followup of 11.3 years. Clinical evaluation was calculated using the hallux score of the American Orthopaedic Foot and Ankle Society (AOFAS). The score improved from a preoperative mean of 52 to a mean of 91.5 points at last followup. Average hallux valgus angle changed from 30.3 degrees preoperatively to 14.2 degrees postoperatively at the last followup. Intermetatarsal angle 1-2 changed from 13.6 degrees preoperatively to 10.2 degrees postoperatively. The correction proved to be consistent with only an average of 3.4-degree correction loss and 4.9-degree loss in the range of motion. Eighty-six feet (97.7%) were pain free. Discomfort with shoewear was absent in 84 feet (95.5%) postoperatively and 24 of 25 (96%) patients were satisfied cosmetically. Capsuloperiosteal flap stabilization of distal chevron osteotomy for mild-moderate hallux valgus yielded excellent clinical results at long-term followup.
Pentikäinen, Ilkka; Piippo, Jouni; Ohtonen, Pasi; Junila, Juhani; Leppilahti, Juhana
2015-01-01
The necessity of chevron osteotomy fixation is controversial and evidence for the effectiveness of postoperative regimens is limited. In a prospective, randomized study, we compared the long-term results of 2 operative techniques (osteotomy fixation versus no fixation) and 2 postoperative regimens (a soft cast versus an elastic bandage) in 100 patients who underwent surgery for hallux valgus. Clinical evaluations with the American Orthopaedic Foot and Ankle Society (AOFAS) scale scoring were performed at baseline and 6 weeks, 6 months, 1 year, and a mean of 7.9 years postoperatively. The mean AOFAS function score were better in the group treated without osteotomy fixation and with an elastic bandage at 6 weeks postoperatively, but the differences then disappeared. The total AOFAS scores improved significantly in all 4 subgroups during the first 12 months; however, in the long term, some deterioration occurred. In the AOFAS scores, the average function, alignment, and total points were significantly worse when the preoperative hallux valgus angles exceeded 30°. The incidence of complication was low (1%); there was 1 superficial wound infection. The AOFAS score did not differ statistically among the groups in our population. An elastic bandage for postoperative treatment is recommended. The risk of recurrence is greater and functional result worse if the preoperative hallux valgus angle exceeds 30°. Copyright © 2015 American College of Foot and Ankle Surgeons. Published by Elsevier Inc. All rights reserved.
[The retrocapital osteotomy ("chevron") for correction of splayfoot with hallux valgus].
Gabel, Michael
2008-12-01
Surgical treatment of hallux valgus deformity with a distal osteotomy of the first metatarsal to address an increased intermetatarsal angle (IMA) I-II. This procedure is combined with a soft-tissue procedure at the first metatarsophalangeal joint: realignment of the first ray, lateral displacement of the first metatarsal head above the sesamoids, rebalancing of the soft tissues at the metatarsophalangeal joint. Pain and soft-tissue inflammation at the bunion, impaired function of the metatarsophalangeal joint, and lateral deviation of the hallux. IMA I-II
Skull base tumors: a comprehensive review of transfacial swing osteotomy approaches.
Moreira-Gonzalez, Andrea; Pieper, Daniel R; Cambra, Jorge Balaguer; Simman, Richard; Jackson, Ian T
2005-03-01
Numerous techniques have been proposed for the resection of skull base tumors, each one unique with regard to the region exposed and degree of technical complexity. This study describes the use of transfacial swing osteotomies in accessing lesions located at various levels of the cranial base. Eight patients who underwent transfacial swings for exposure and resection of cranial base lesions between 1996 and 2002 were studied. The mandible was the choice when wide exposure of nasopharyngeal and midline skull base tumors was necessary, especially when they involved the infratemporal fossa. The midfacial swing osteotomy was an option when access to the entire clivus was necessary. An orbital swing approach was used to access large orbital tumors lying inferior to the optic nerve and posterior to the globe, a region that is often difficult to visualize. Gross total tumor excision was possible in all patients. Six patients achieved disease control and two had recurrences. The complications of cerebrospinal fluid leak, infection, hematoma, or cranial nerve damage did not occur. After surgery, some patients experienced temporary symptoms caused by local swelling. The aesthetic result was considered good. Transfacial swing osteotomies provide a wide exposure to tumors that occur in the central skull base area. Excellent knowledge of the detailed anatomy of this region is paramount to the success of this surgery. The team concept is essential; it is built around the craniofacial surgeon and an experienced skull base neurosurgeon.
Biomechanical Assessment of Patellar Advancement Procedures for Patella Alta.
Seidl, Adam; Baldini, Todd; Krughoff, Kevin; Shapiro, Joshua A; Lindeque, Bennie; Rhodes, Jason; Carollo, James
2016-05-01
Crouch gait deformity is common in children with cerebral palsy and often is associated with patella alta. Patellar tendon advancement typically is used to correct patella alta and restore normal knee mechanics. The purpose of this study was to determine the mechanical strength of surgical constructs used for fixation during patellar advancement procedures. This study used a cadaveric model to determine which of 3 surgical techniques is biomechanically optimal for patellar tendon advancement in treating patella alta. Twenty-four human cadaveric knees (8 per group) were prepared using 1 of 3 different common surgical techniques: tibial tubercle osteotomy, patellar tendon partial resection and repair at the distal patella, and patellar tendon imbrication. The patella was loaded from 25 to 250 N at 1 Hz for 1000 cycles. A significant difference in patella displacement under cyclical loading was found between surgical techniques. Tibial tubercle osteotomy exhibited significantly less displacement under cyclical loading than distal patella excision and repair (P<.0001) or imbrication (P=.0088). Imbrication exhibited significantly less displacement than distal patella excision and repair (P=.0006). Tibial tubercle osteotomy survived longest. Based on failure criteria of 5 mm of displacement, tibial tubercle osteotomy lasted between 250 and 500 cycles. The other 2 techniques failed by 25 cycles. This study offers quantitative evidence regarding the relative mechanical strength of each construct and may influence choice of surgical technique. [Orthopedics. 2016; 39(3):e492-e497.]. Copyright 2016, SLACK Incorporated.
Drew, Jarrod O; Glyde, Mark R; Hosgood, Giselle L; Hayes, Alex J
2018-02-01
To evaluate the effect of tibial plateau levelling osteotomy on stifle extensor mechanism load in an ex vivo cruciate-intact canine cadaveric model. Ex vivo mechanical testing study. Cadaveric canine pelvic limbs ( n = 6). A 21-mm tibial radial osteotomy was performed on pelvic limbs ( n = 6) prior to being mounted into a load-bearing limb press. The proximal tibial segment was incrementally rotated until the anatomical tibial plateau angle had been rotated to at least 1°. The proportional change in stifle extensor mechanism load between the anatomical tibial plateau angle and the neutralized (∼6.5 degrees) and over-rotated (∼1°) tibial plateau angle was analysed using a one-sample t -test against a null hypothesis of no change. A p -value ≤0.05 was considered significant. There was no significant change in the stifle extensor mechanism load from the anatomical tibial plateau angle (308 N [261-355 N]) to the neutralized tibial plateau angle (313 N [254-372 N]; p =.81), or from the anatomical tibial plateau angle to the over-rotated tibial plateau angle (303 N [254-352 N; p = 0.67). Tibial plateau levelling osteotomy does not significantly alter stifle extensor mechanism load at either a neutralized or over-rotated tibial plateau angle in our cruciate-intact model. Schattauer GmbH Stuttgart.
Türkmen, İsmail; Esenkaya, İrfan; Ünay, Koray; Türkmensoy, Fatih; Özkut, Afşar Timuçin
2014-01-01
Objectives: The purpose of this study is to evaluate the early results of proximal tibia medial biplanar retrotubercle open wedge osteotomy for varus gonarthrosis and compare the results with the literatüre. Methods: The results of proximal tibia medial biplanar retrotubercle open wedge osteotomy for 23 knees of 22 patients with medial gonarthrosis were evaluated clinically and radiologically. Results: Twenty of the patients were female and two were male. Mean age of the patients was 56.24; mean boy mass index was 31.95 and preoperative HSS (Hospital for Special Surgery) score was 68.7. Mean tibiofemoral axis was 186.39° and mean Insall-Salvatti index value was 1.04 preoperatively. Mean follow up period was 30.19 months. Mean HSS score was 86.48, femorotibial anatomic axis angle was 175° and Insall-Salvati index value 1.06 during the last follow-up. The improvement of the HSS score and the femorotibial anatomic axis angle was statistically significant. However, the change in Insall Salvati index values was statistically insignificant. Nonfatal pulmonary embolus in 1 patient, and deep vein thrombosis that occured one year after the procedure in 1 patient, rhabdomyolysis in 1 patient and loss of correction (relapse) in 1 patient were encountered as complications. Conclusion: Our results show that proximal tibia medial biplanar retrotubercle open wedge osteotomy improves the frontal and sagittal plane deformities without changing the patellar tendon length. Hence, possible patellofemoral problems are prevented and the clinical results are improved.
Is subcranial Le Fort III plus Le Fort I osteotomy stable?
Boos Lima, Fernanda Brasil Daura Jorge; Hochuli Vieira, Eduardo; Juergens, Philipp; Lima Junior, Sergio Monteiro
2017-12-01
The purpose of this study was to test whether associated subcranial Le Fort III (sLF III) and Le Fort I (LF I) osteotomies are stable after large advancements of the middle third of the face and maxilla. The authors designed a retrospective study and enrolled a sample of consecutive patients with midface hypoplasia treated with associated sLF III and LF I osteotomies in this IRB-approved study between September 2013 and February 2015. To test whether the long-term stability was satisfactory, the authors compared cephalometric changes from immediately after surgery to 18 months after surgery taken from multi-slice computed tomography using two different third-party imaging software programs. Statistical significance was set as P ≤ 0.05. The sample comprised 11 patients (mean age 23.84 ± 4.17 yr; 54% men). The mean advancement of the upper incisor immediately after surgery was 10.03 ± 1.6 mm. After 18 months, the position of the upper incisor did not vary significantly (10.18 ± 2.35 mm). All other cephalometric landmarks did not present statistically significant differences between immediately after and 18 months after surgery, with horizontal and vertical variations of less than one millimetre. This study supports that sLF III and LF I osteotomies are effective in maintaining stable horizontal and vertical skeletal positioning after surgery. Copyright © 2017 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.
Assessment of pterygomaxillary separation in Le Fort I Osteotomy in class III patients.
Ueki, Koichiro; Hashiba, Yukari; Marukawa, Kohei; Okabe, Katsuhiko; Alam, Shamiul; Nakagawa, Kiyomasa; Yamamoto, Etsuhide
2009-04-01
To examine the separation of the pterygomaxillary region at the posterior nasal spine level after Le Fort I osteotomy in Class III patients. The study group consisted of 37 Japanese patients with mandibular prognathism and asymmetry, with maxillary retrognathism or asymmetry. A total of 74 sides were examined. Le Fort I osteotomy was performed without a pterygoid osteotome, with an ultrasonic curette used to remove interference at the pterygomaxillary region. Postoperative computed tomography (CT) was analyzed for all patients. The separation of the pterygomaxillary region and the location of the descending palatine artery were assessed. Although acceptable separation between the maxilla and pterygoid plates was achieved in all patients, an exact separation of the pterygomaxillary junction at the posterior nasal spine level was found in only 18 of 74 sides (24%). In 29 of 74 sides (39.2%), the separation occurred anterior to the descending palatine artery. In 29 of 74 sides (39.2%), complete separation between the maxilla and lateral and/or medial pterygoid plate was not achieved, but lower level separation of the maxilla and pterygoid plate was always complete. The maxillary segments could be moved to the postoperative ideal position in all cases. Le Fort I osteotomy without an osteotome does not always induce an exact separation at the pterygomaxillary junction at the posterior nasal spine level, but the ultrasonic bone curette can remove the interference between maxillary segment and pterygoid plates more safely.
Chung, Jae-Ho; You, Hi-Jin; Hwang, Na-Hyun; Yoon, Eul-Sik
2016-01-01
Background Conventional correction of malunioned zygoma requires complete regional exposure through a bicoronal flap combined with a lower eyelid incision and an upper buccal sulcus incision. However, there are many potential complications following bicoronal incisions, such as infection, hematoma, alopecia, scarring and nerve injury. We have adopted a zygomaticofrontal suture osteotomy technique using transconjunctival incision with lateral paracanthal extension. We performed a retrospective review of clinical cases underwent correction of malunioned zygoma with the approach to evaluate outcomes following this method. Methods Between June 2009 and September 2015, corrective osteotomies were performed in 14 patients with malunioned zygoma by a single surgeon. All 14 patients received both upper gingivobuccal and transconjunctival incisions with lateral paracanthal extension. The mean interval from injury to operation was 16 months (range, 12 months to 4 years), and the mean follow-up was 1 year (range, 4 months to 3 years). Results Our surgical approach technique allowed excellent access to the infraorbital rim, orbital floor, zygomaticofrontal suture and anterior surface of the maxilla. Of the 14 patients, only 1 patient suffered a complication—oral wound dehiscence. Among the 6 patients who received infraorbital nerve decompression, numbness was gradually relieved in 4 patients. Two patients continued to experience persistent numbness. Conclusion Transconjunctival incision with lateral paracanthal extension combined with upper gingivobuccal sulcus incision offers excellent exposure of the zygoma-orbit complex, and could be a valid alternative to the bicoronal approach for osteotomy of malunioned zygoma. PMID:28913268
Guide surgery osteotomy system (GSOS) a new device for treatment in orthognathic surgery.
Salvato, Giuseppe; Chiavenna, Carlo; Meazzini, Maria Costanza
2014-04-01
This article proposes an innovative and revolutionary diagnostic and therapeutic protocol for performing dentoalveolar osteotomies in office under local anaesthesia with piezoelectric surgery using a surgical acrylic guide produced through software-based planning. The method was applied in the correction of crossbites, changing in the curve of Spee, incisal decompensations and dental ankylosis. Performing a preoperative CT with a special splint, optical scanning of the models and the subsequent planning with software has enabled us to produce a model with rapid prototyping with the design of the osteotomy on which the surgical guide was shaped, the use of the guide associated with piezoelectric surgery, allowed to perform surgery under local anaesthesia, with minimal invasiveness and high accuracy. Dentoalveolar immediate movements, with preservation of the roots of teeth involved, allow for rapid treatment of malocclusions which would be long and often difficult if not impossible to treat with orthodontics only. Dentoalveolar osteotomies associated to osteodistraction concepts, allow the orthodontist to achieve with accuracy the objectives required by the treatment plan. GSOS is a new method, which, utilizing 3D optical scanning images of models, software and piezoelectric surgery, allows to perform dentoalveolar movements which may be dangerous to the roots or for the periodontal support, with orthodontics only. It dramatically reduces total surgical-orthodontic treatment time, with obvious great patient satisfaction. Copyright © 2013 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.
Adjustable stiffness, external fixator for the rat femur osteotomy and segmental bone defect models.
Glatt, Vaida; Matthys, Romano
2014-10-09
The mechanical environment around the healing of broken bone is very important as it determines the way the fracture will heal. Over the past decade there has been great clinical interest in improving bone healing by altering the mechanical environment through the fixation stability around the lesion. One constraint of preclinical animal research in this area is the lack of experimental control over the local mechanical environment within a large segmental defect as well as osteotomies as they heal. In this paper we report on the design and use of an external fixator to study the healing of large segmental bone defects or osteotomies. This device not only allows for controlled axial stiffness on the bone lesion as it heals, but it also enables the change of stiffness during the healing process in vivo. The conducted experiments have shown that the fixators were able to maintain a 5 mm femoral defect gap in rats in vivo during unrestricted cage activity for at least 8 weeks. Likewise, we observed no distortion or infections, including pin infections during the entire healing period. These results demonstrate that our newly developed external fixator was able to achieve reproducible and standardized stabilization, and the alteration of the mechanical environment of in vivo rat large bone defects and various size osteotomies. This confirms that the external fixation device is well suited for preclinical research investigations using a rat model in the field of bone regeneration and repair.
Importance of tibial slope for stability of the posterior cruciate ligament deficient knee.
Giffin, J Robert; Stabile, Kathryne J; Zantop, Thore; Vogrin, Tracy M; Woo, Savio L-Y; Harner, Christopher D
2007-09-01
Previous studies have shown that increasing tibial slope can shift the resting position of the tibia anteriorly. As a result, sagittal osteotomies that alter slope have recently been proposed for treatment of posterior cruciate ligament (PCL) injuries. Increasing tibial slope with an osteotomy shifts the resting position anteriorly in a PCL-deficient knee, thereby partially reducing the posterior tibial "sag" associated with PCL injury. This shift in resting position from the increased slope causes a decrease in posterior tibial translation compared with the PCL-deficient knee in response to posterior tibial and axial compressive loads. Controlled laboratory study. Three knee conditions were tested with a robotic universal force-moment sensor testing system: intact, PCL-deficient, and PCL-deficient with increased tibial slope. Tibial slope was increased via a 5-mm anterior opening wedge osteotomy. Three external loading conditions were applied to each knee condition at 0 degrees, 30 degrees, 60 degrees, 90 degrees, and 120 degrees of knee flexion: (1) 134-N anterior-posterior (A-P) tibial load, (2) 200-N axial compressive load, and (3) combined 134-N A-P and 200-N axial loads. For each loading condition, kinematics of the intact knee were recorded for the remaining 5 degrees of freedom (ie, A-P, medial-lateral, and proximal-distal translations, internal-external and varus-valgus rotations). Posterior cruciate ligament deficiency resulted in a posterior shift of the tibial resting position to 8.4 +/- 2.6 mm at 90 degrees compared with the intact knee. After osteotomy, tibial slope increased from 9.2 degrees +/- 1.0 degrees in the intact knee to 13.8 degrees +/- 0.9 degrees. This increase in slope reduced the posterior sag of the PCL-deficient knee, shifting the resting position anteriorly to 4.0 +/- 2.0 mm at 90 degrees. Under a 200-N axial compressive load with the osteotomy, an additional increase in anterior tibial translation to 2.7 +/- 1.7 mm at 30 degrees was observed. Under a 134-N A-P load, the osteotomy did not significantly affect total A-P translation when compared with the PCL-deficient knee. However, because of the anterior shift in resting position, there was a relative decrease in posterior tibial translation and increase in anterior tibial translation. Increasing tibial slope in a PCL-deficient knee reduces tibial sag by shifting the resting position of the tibia anteriorly. This sag is even further reduced when the knee is subjected to axial compressive loads. These data suggest that increasing tibial slope may be beneficial for patients with PCL-deficient knees.
Slocum, B; Devine, T
1984-03-01
Cranial tibial wedge osteotomy, surgical technique for cranial cruciate ligament rupture, was performed on 19 stifles in dogs. This procedure leveled the tibial plateau, thus causing weight-bearing forces to be compressive and eliminating cranial tibial thrust. Without cranial tibial thrust, which was antagonistic to the cranial cruciate ligament and its surgical reconstruction, cruciate ligament repairs were allowed to heal without constant loads. This technique was meant to be used as an adjunct to other cranial cruciate ligament repair techniques.
The Proposal and Early Results of Capitate Forage as a New Treatment Method for Kienböck's Disease.
Bekler, Halil Ibrahim; Erdag, Yiğit; Gumustas, Seyit Ali; Pehlivanoglu, Gökhan
2013-12-01
Kienböck's disease is a type of avascular necrosis which disrupts the biomechanics of the wrist as a result of the changes it creates in the lunate bone. Its treatment generally consists of osteotomies intended to relieve the pressure on the bone, pedicle bone grafting applications aiming to increase bone blood supply, and salvage procedures. Capitate forage is a safe and simple-to-apply surgical treatment method which is intended to enhance neovascularization of the lunate much like a radius osteotomy or core decompression.
The gonial angle stripper: an instrument for the treatment of prominent gonial angle.
Kyutoku, S; Yanagida, A; Kusumoto, K; Ogawa, Y
1994-12-01
In the Orient, a prominent gonial angle, so-called benign masseteric hypertrophy, is rather common and considered unattractive. Therefore, its surgical correction is one of the most popular forms of facial skeletal contouring. For accurate and safe osteotomy of the mandibular angle region, a gonial angle stripper was specially invented. It has a small projection that will ease identification of the osteotomy line in a narrow operative field. The tool has been clinically used in eight patients to prove its usefulness, especially for a posteriorly developed mandibular angle.
Ayvaz, Mehmet; Olgun, Z Deniz; Demirkiran, H Gokhan; Alanay, Ahmet; Yazici, Muharrem
2014-01-01
Congenital kyphoscoliosis is a disorder that often requires surgical treatment. Although many methods of surgical treatment exist, posterior-only vertebral column resection with instrumentation and fusion seem to have become the gold standard for very severe and very rigid curves. Multiple chevron and concave rib osteotomies have been previously reported to be effective in the treatment of neglected severe idiopathic curves. We hypothesized that this method may also be used successfully in the treatment of congenital kyphoscoliosis. To evaluate the effectiveness and safety of multiple chevron osteotomies combined with concave rib osteotomy and posterior pedicle screw instrumentation. Retrospective chart review in the spine service of a large university hospital. Adolescent patients undergoing a specific surgical treatment for the indication of rigid congenital kyphoscoliotic deformity. Radiographic images were used for the measurement of deformity correction. The Turkish version of the Scoliosis Research Society 22 (SRS-22) Patient Questionnaire has been used as a clinical outcome measure in the patient population. A retrospective chart review was performed. Patients admitted to Hacettepe Hospital Spine Center during the period of 2005 to 2009 were included. Criteria for inclusion were as follows: adolescent age group (10-16 years); congenital kyphoscoliosis; formation and/or segmentation defect of at least two vertebral motion segments; surgical treatment of deformity by posterior all-pedicle screw instrumentation, multiple chevron osteotomies, and multiple concave rib osteotomies; follow-up of at least 24 months; and a complete set of preoperative, postoperative, and follow-up standing posteroanterior and lateral full spinal radiographs. The patients' hospital records and X-rays were reviewed. Duration of surgery, intraoperative blood loss, postoperative transfusion requirements, postoperative stay in postanesthesia care unit (PACU), time of hospitalization, and complications were recorded. Deformity in both coronal and sagittal planes was analyzed for correction and maintenance of the correction in preoperative, postoperative, and follow-up radiographs. Patients' health-related quality of life was assessed using the SRS-22 questionnaire at the final follow-up. Eighteen patients met the inclusion criteria. Their average age was 13.6 years (range, 11-16 years). Chevron osteotomies were performed at apical segments (three to seven levels) and concave rib osteotomies at Cobb-to-Cobb (five to eight levels). No patient had preoperative cord compression because of the sharply angulated deformity or neurologic deficit. The average preoperative scoliosis was 66.0° (range, 31°-116°), 52.4° (range, 22°-85°) on flexibility X-rays, and became 24.9° (range, 12°-52°) postoperatively. The average preoperative global kyphosis (T2-T12) of 75.9° (range, 50°-106°) became 49.5° (range, 18°-66°). The average preoperative local kyphosis of 71.9° (range, 35°-114°) became 31.4° (range, -44° to 64°). The average intraoperative bleeding was 989 cc, surgical time was 292 minutes, and intraoperative transfusion was 2.3 units. The maximum PACU stay was overnight. There were no neurologic complications except one pneumothorax and one pneumonia. The average follow-up was 34.3 months. At follow-up, average scoliosis was 27.5° (range, 10°-50°), global kyphosis was 50.3° (range, 28°-73°), and local kyphosis was 36.9°(range, -36° to 58°). Performed on the last follow-up, the average scores for the five domains of SRS-22 were 4.3, 4.4, 4.2, 4.1, and 4.8 for function, pain, self-image, mental health, satisfaction, and total, respectively. Multiple chevron and concave rib osteotomies with posterior instrumentation provide an acceptable rate of deformity correction and maintenance of correction at 2 years with acceptable intraoperative bleeding, surgical time, postoperative morbidity, and rate of complications. It can be considered as an alternative in the treatment of rigid congenital curves involving more than three levels or multiple curves separated by at least two segments that would otherwise require multiple vertebral resections. Copyright © 2014 Elsevier Inc. All rights reserved.
Ozden, V Emre; Dikmen, G; Beksac, B; Tozun, I Remzi
2017-06-01
The results of cementless stems in total hip arthroplasty (THA) done because of congenital dislocation with step-cut osteotomy is not well known, particularly the influence of the design and the role of extent of porous coating. Therefore we performed a retrospective study to evaluate the mid to long-term results THA performed with a single type acetabular component and different geometry and fixation type stems with ceramic bearings in the setting of step-cut subtrochanteric osteotomy in high hip dislocated (HHD) patients. We asked if the stem type affect the outcomes in terms of (1) intra and postoperative complication rates (2) radiographic outcomes (3) prosthesis survival in step-cut subtrochanteric shortening osteotomy. The type of the stem, whether cylindrical or tapered does not affect the outcome if the femoral canal fit and fill is obtained and the step-cut femoral shortening osteotomy is primarily fixed. Forty-five hips in 35 patients with a mean follow up of 10 years (range, 7-14 years) were evaluated. The single type cementless cup was placed at the level of the true acetabulum, a step-cut shortening femoral osteotomy was performed and reconstruction was performed with two different types of tapered stem in twenty-two hips (Synergy™ and Image™ proximally coated, Smith and Nephew, Menphis, TN, USA) and one type of cylindrical stem (Echelon™ with 2/3 coated, Smith and Nephew, Menphis, TN, USA) in twenty-three hips. Harris hip scores (HHS) and a University of California Los Angeles (UCLA) activity scores were calculated for all patients and successive X-rays were evaluated regarding component loosening and osteolysis, along with complications related to bearing, step-cut osteotomy and stem types. Forty-one hips (91%) had good and excellent clinical outcome according to HHS. The mean UCLA activity scores improved from 3.2±0.6 points (range, 2-4) preoperatively to 6.3 points±0.5 (range, 5-7) at the latest follow-up. The mean femoral shortening was 36±10mm (range, 20-65mm). Four (9%) dislocations were observed. There were five (11%) intra-operative femoral fractures and three (7%) cases of non-union, which were observed in tapered stems. Cylindrical stems had superior neutral alignment primarily. With any stem revision as the end point, cylindrical stems had a higher survival rate (100%) than all tapered stems (82%; 95% confident interval [CI] 77-97%) at ten years. With any revision as the end point, the 10-year survival rate for acetabular component (Reflection-Ceramic Interfit) and for femoral components were 98% (95% CI, 85-99%) and 91% (95% CI, 78-97%), respectively. There were more implant related complications in HHD patients undergoing THA when tapered stems with 1/3 proximal coating were used to reconstruct a step cut osteotomized femur, compared to cylindrical stems 2/3 coated. IV, retrospective study. Copyright © 2017 Elsevier Masson SAS. All rights reserved.
Feng, S M; Wang, A G; Ding, P; Zhang, Z Y; Zhou, M M; Li, C K; Sun, Q Q
2016-07-26
To explore the surgical method of using the modified chevron osteotomy combined distal soft tissue reconstruction to treat high-grade bunionette deformity. From June 2013 to June 2015, the modified chevron osteotomy combined distal soft tissue reconstruction was used for surgical treatment of high-grade bunionette deformity in the Department of Hand and Foot Microsurgery in Xuzhou Central Hospital.Twenty-six patients with 28 feet high-grade bunionette deformity were hospitalized for treatment, with 3 male (3 feet) and 23 female (25 feet) cases, aged 22-73 (mean 47.1) years old.The average fourth-fifth intermetatarsal angle, lateral deviation of the fifth metatarsal angle and metatarsophalangeal-fifth angle were measured on the pre-and post- operative anterior to posterior weight-beating X rays of treated feet.The American Orthopaedic Foot and Ankle Society (AOFAS) Lesser Toe Metatarsophalangeal-Interphalangeal Scale was used to evaluate the post-operative outcomes. All of 26 patients were followed, with a mean 15.7 months (range 8-25 months). Primarily healing of the wound was achieved in all cases.No postoperative infection and nonunion on the osteotomy site was found during the follow-up time.The fracture healing time was 6-15 (mean 12.2) weeks.All the patients had satisfactory appearance and sensory function without callosum and metastatic metatarsalgia at the final follow-up.The post-operative fourth-fifth intermetatarsal angle, lateral deviation of the fifth metatarsal angle and metatarsophalangeal-fifth angle were significantly lesser than the pre-operative at the 6th week after operation, respectively [(5.5±1.7)°, (2.1±0.8)°, (5.7±2.6)°vs (16.4±4.2)°, (6.0±2.2)°, (10.5±7.4)°; all P<0.01]. The post-operative AOFAS score was significantly greater than the pre-operative [(87.1±6.7) vs (62.3±9.8) points, P<0.001]. The modified chevron osteotomy combined distal soft tissue reconstruction is a safe and easy treatment option for the high-grade bunionette deformity and provides patient satisfaction results.
Effects of Le Fort I Osteotomy on the Nasopharyngeal Airway-6-Month Follow-Up.
Almuzian, Mohammed; Almukhtar, Anas; Ju, Xiangyang; Al-Hiyali, Ali; Benington, Philip; Ayoub, Ashraf
2016-02-01
The literature discussing the impact of a single Le Fort I osteotomy on nasopharyngeal airways is limited. This study assessed the volumetric changes in the nasopharyngeal airway after a single Le Fort I osteotomy and explored the correlation between these changes and 3-dimensional surgical movements of the upper jaw. This retrospective study was conducted in 40 patients who had undergone a single Le Fort I (maxillary advancement with or without impaction) to correct Class III malocclusion with maxillary hypoplasia. Preoperative (T1) and 6-month postoperative (T2) cone-beam computed tomographic (CBCT) scans of these patients were used for analysis. Maxillary surgical movements and volumetric changes in the nasopharyngeal airway were measured. The reproducibility of the measurements was evaluated using paired t tests and intraclass correlation coefficients. The Wilcoxon test and Pearson correlation coefficient were applied to evaluate the volumetric changes in the nasopharyngeal airway space and assess the correlations of these changes to the maxillary surgical movements. Six patients were excluded from the study owing to major differences (>5°) in their head and neck posture between the T1 and T2 CBCT scans. The errors of the repeated measurements were insignificant (P > .05), with a high level of agreement (r = 0.99; P < .05) between the repeated digitization of the landmarks. There was a statistically significant impact of a Le Fort I osteotomy on the right maxillary sinus (decreased by 17.8%) and the lower retropalatal space (expanded by 17.3%; P < .05). The correlation between the change in airway volume and the magnitude of surgical maxillary movements was moderate (r = .4). Similarly, there was a moderate correlation between changes in the upper nasopharynx and those in the hypopharynx. The single Le Fort I osteotomy was found to increase the retroglossal airway volume. This could be important for the treatment of obstructive sleep apnea in patients with maxillary deficiency. A long-term follow-up assessment of a larger sample with a functional assessment of airway would be beneficial to confirm these findings. Copyright © 2016 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.
Dejour, David; Saffarini, Mo; Demey, Guillaume; Baverel, Laurent
2015-10-01
Revision ACL reconstruction requires careful analysis of failure causes particularly in cases of two previous graft ruptures. Intrinsic factors as excessive tibial slope or narrow femoral notch increase failure risks but are rarely addressed in revision surgery. The authors report outcomes, at minimum follow-up of 2 years, for second revision ACL reconstructions combined with tibial deflexion osteotomy for correction of excessive slope (>12°). Nine patients that underwent second revision ACL reconstruction combined with tibial deflexion osteotomy were retrospectively studied. The mean age was 30.3 ± 4.4 years (median 28; range 26-37), and mean follow-up was 4.0 ± 2.0 years (median 3.6; range 2.0-7.6). Autografts were harvested from the quadriceps tendon (n = 8) or hamstrings (n = 1), and tibial osteotomy was done by anterior closing wedge, without detachment of the patellar tendon, to obtain a slope of 3° to 5°. All patients had fused osteotomies, stable knees, and there were no intraoperative or postoperative complications. The mean posterior tibial slope decreased from 13.2° ± 2.6° (median 13°; range 12°-18°) preoperatively to 4.4° ± 2.3° (median 4°; range 2°-8°) postoperatively. The mean Lysholm score was 73.8 ± 5.8 (median 74; range 65-82), and the IKDC-SKF was 71.6 ± 6.1 (median 72.8; range 62.2-78.5). The satisfactory results of second revision ACL reconstruction combined with tibial deflexion osteotomy at minimum follow-up of 2 years suggest that tibia slope correction protects reconstructed ACL from fatigue failure in this study. The authors stress the importance of careful analysis failure causes prior to revision ACL reconstruction, and recommend correction of tibial slope if it exceeds 12°, to reduce the risks of graft retear. III.
Piezoelectric Versus Conventional Rotary Techniques for Impacted Third Molar Extraction
Jiang, Qian; Qiu, Yating; Yang, Chi; Yang, Jingyun; Chen, Minjie; Zhang, Zhiyuan
2015-01-01
Abstract Impacted third molars are frequently encountered in clinical work. Surgical removal of impacted third molars is often required to prevent clinical symptoms. Traditional rotary cutting instruments are potentially injurious, and piezosurgery, as a new osteotomy technique, has been introduced in oral and maxillofacial surgery. No consistent conclusion has been reached regarding whether this new technique is associated with fewer or less severe postoperative sequelae after third molar extraction. The aim of this study was to compare piezosurgery with rotary osteotomy techniques, with regard to surgery time and the severity of postoperative sequelae, including pain, swelling, and trismus. We conducted a systematic literature search in the Cochrane Library, PubMed, Embase, and Google Scholar. The eligibility criteria of this study included the following: the patients were clearly diagnosed as having impacted mandibular third molars; the patients underwent piezosurgery osteotomy, and in the control group rotary osteotomy techniques, for removing impacted third molars; the outcomes of interest include surgery time, trismus, swelling or pain; the studies are randomized controlled trials. We used random-effects models to calculate the difference in the outcomes, and the corresponding 95% confidence interval. We calculated the weighted mean difference if the trials used the same measurement, and a standardized mean difference if otherwise. A total of seven studies met the eligibility criteria and were included in our analysis. Compared with rotary osteotomy, patients undergoing piezosurgery experienced longer surgery time (mean difference 4.13 minutes, 95% confidence interval 2.75–5.52, P < 0.0001). Patients receiving the piezoelectric technique had less swelling at postoperative days 1, 3, 5, and 7 (all Ps ≤0.023). Additionally, there was a trend of less postoperative pain and trismus in the piezosurgery groups. The number of included randomized controlled trials and the sample size of each trial were relatively small, double blinding was not possible, and cost analysis was unavailable due to a lack of data. Our meta-analysis indicates that although patients undergoing piezosurgery experienced longer surgery time, they had less postoperative swelling, indicating that piezosurgery is a promising alternative technique for extraction of impacted third molars. PMID:26469902
Jiang, Qian; Qiu, Yating; Yang, Chi; Yang, Jingyun; Chen, Minjie; Zhang, Zhiyuan
2015-10-01
Impacted third molars are frequently encountered in clinical work. Surgical removal of impacted third molars is often required to prevent clinical symptoms. Traditional rotary cutting instruments are potentially injurious, and piezosurgery, as a new osteotomy technique, has been introduced in oral and maxillofacial surgery. No consistent conclusion has been reached regarding whether this new technique is associated with fewer or less severe postoperative sequelae after third molar extraction.The aim of this study was to compare piezosurgery with rotary osteotomy techniques, with regard to surgery time and the severity of postoperative sequelae, including pain, swelling, and trismus.We conducted a systematic literature search in the Cochrane Library, PubMed, Embase, and Google Scholar.The eligibility criteria of this study included the following: the patients were clearly diagnosed as having impacted mandibular third molars; the patients underwent piezosurgery osteotomy, and in the control group rotary osteotomy techniques, for removing impacted third molars; the outcomes of interest include surgery time, trismus, swelling or pain; the studies are randomized controlled trials.We used random-effects models to calculate the difference in the outcomes, and the corresponding 95% confidence interval. We calculated the weighted mean difference if the trials used the same measurement, and a standardized mean difference if otherwise.A total of seven studies met the eligibility criteria and were included in our analysis. Compared with rotary osteotomy, patients undergoing piezosurgery experienced longer surgery time (mean difference 4.13 minutes, 95% confidence interval 2.75-5.52, P < 0.0001). Patients receiving the piezoelectric technique had less swelling at postoperative days 1, 3, 5, and 7 (all Ps ≤0.023). Additionally, there was a trend of less postoperative pain and trismus in the piezosurgery groups.The number of included randomized controlled trials and the sample size of each trial were relatively small, double blinding was not possible, and cost analysis was unavailable due to a lack of data.Our meta-analysis indicates that although patients undergoing piezosurgery experienced longer surgery time, they had less postoperative swelling, indicating that piezosurgery is a promising alternative technique for extraction of impacted third molars.
Chiba, Ko; Yonekura, Akihiko; Miyamoto, Takashi; Osaki, Makoto; Chiba, Goji
2017-03-01
Tibial condylar valgus osteotomy (TCVO) is a type of opening-wedge high tibial osteotomy for advanced medial knee osteoarthritis (OA) with subluxated lateral joint. We report the concept, the current surgical technique with a locking plate, and the short-term clinical and radiological results of this procedure. 11 knees with medial OA and a widened lateral joint were treated by TCVO (KL stage III: 6, IV: 5). In this procedure, by the L-shaped osteotomy from the medial side of the proximal tibia to the intercondylar eminence and the valgus correction, lateralization of the mechanical axis and reduction of the subluxated lateral joint are obtained with early postoperative weight-bearing. Before, 6 months, 1, and 5 years after the operation, a visual analog scale (VAS), the Western Ontario and McMaster Universities Arthritis Index (WOMAC), alignment of the lower extremity, and congruency and stability of the femorotibial joint were investigated. The VAS improved from an average of 73 mm to 13 mm, and the total WOMAC score from 52 to 14 before to 5 years after the operation, respectively. The mechanical axis changed from 1 to 60%, and the FTA changed from 186° to 171°. The joint line convergence angle (JLCA) changed from 6° to 1°, and the angle difference of JLCA between varus and valgus stress improved from 8° to 4° after the procedure. Improvements in pain and activities of daily living were observed by TCVO along with valgus correction of the lower extremity and stabilization of the femorotibial joint.
[Z-osteotomy of distal fibula to correct widened ankle mortice after fracture].
Tao, Xu; Tang, Kanglai; Zhou, Jianbo
2012-07-01
To analyse the clinical outcomes of the Z-osteotomy of the distal fibula to correct widened mortice of the ankle after fracture. Between September 2009 and February 2011, 5 patients (5 feet) with widened ankle mortice after fracture underwent Z-osteotomy. There were 4 males and 1 female, aged from 23 to 58 years (mean, 38 years). At 3 months after operation of internal fixation when function exercises were done, patients got pains. The interval between trauma and operation ranged from 5 to 36 months (mean, 13.2 months). Lateral pressure test showed positive in 2 cases and negative in 3 cases. American Orthopedic Foot and Ankle Society (AOFAS) ankle-hindfoot score was 50.2 +/- 17.3. Primary healing of incision was achieved in all cases. Five patients were followed up 9 to 24 months (mean, 15.6 months). Mild to moderate swelling of the affected limb and anterolateral skin numbness of the ipsilateral dorsal foot occurred, and gradually improved. The clinical exam and radiology showed bone union at 12-15 weeks (mean, 13.5 weeks). Postoperative range of motion of ankle had no significant improvement. AOFAS ankle-hindfoot scores were 76.8 +/- 11.2 at 6 months after operation, and 85.4 +/- 3.2 at last follow-up, showing significant differences when compared with preoperative score (P < 0.05). Shortened fibula is the main cause of widened ankle mortice after fracture; Z-osteotomy can effectively reduce the width of the ankle mortice, increase the stability of ankle joint, and decrease the complication rate.
Role of the fibula in the stability of diaphyseal tibial fractures fixed by intramedullary nailing.
Galbraith, John G; Daly, Charles J; Harty, James A; Dailey, Hannah L
2016-10-01
For tibial fractures, the decision to fix a concomitant fibular fracture is undertaken on a case-by-case basis. To aid in this clinical decision-making process, we investigated whether loss of integrity of the fibula significantly destabilises midshaft tibial fractures, whether fixation of the fibula restores stability to the tibia, and whether removal of the fibula and interosseous membrane for expediency in biomechanical testing significantly influences tibial interfragmentary mechanics. Tibia/fibula pairs were harvested from six cadaveric donors with the interosseous membrane intact. A tibial osteotomy fracture was fixed by reamed intramedullary (IM) nailing. Axial, torsion, bending, and shear tests were completed for four models of fibular involvement: intact fibula, osteotomy fracture, fibular plating, and resected fibula and interosseous membrane. Overall construct stiffness decreased slightly with fibular osteotomy compared to intact bone, but this change was not statistically significant. Under low loads, the influence of the fibula on construct stability was only statistically significant in torsion (large effect size). Fibular plating stiffened the construct slightly, but this change was not statistically significant compared to the fibular osteotomy case. Complete resection of the fibula and interosseous membrane significantly decreased construct torsional stiffness only (large effect size). These results suggest that fixation of the fibula may not contribute significantly to the stability of diaphyseal tibial fractures and should not be undertaken unless otherwise clinically indicated. For testing purposes, load-sharing through the interosseous membrane contributes significantly to overall construct mechanics, especially in torsion, and we recommend preservation of these structures when possible. Copyright © 2016 Elsevier Ltd. All rights reserved.
Hemi-wedge osteotomy in the management of large angular deformities around the knee joint.
El-Alfy, Barakat Sayed
2016-08-01
Angular deformity around the knee joint is a common orthopedic problem. Many options are available for the management of such problem with varying degrees of success and failure. The aim of the present study was to assess the results of hemi-wedge osteotomy in the management of big angular deformities about the knee joint. Twenty-eight limbs in 21 patients with large angular deformities around the knee joint were treated by the hemi-wedge osteotomy technique. The ages ranged from 12 to 43 years with an average of 19.8 years. The deformity ranged from 20° to 40° with a mean of 30.39° ± 5.99°. The deformities were genu varum in 12 cases and genu valgum in 9 cases. Seven cases had bilateral deformities. Small wedge was removed from the convex side of the bone and put in the gap created in the other side after correction of the deformity. At the final follow-up, the deformity was corrected in all cases except two. Full range of knee movement was regained in all cases. The complications included superficial wound infection in two cases, overcorrection in one case, pain along the lateral aspect of the knee in one case and recurrence of the deformity in one case. No cases were complicated by nerve injury or vascular injury. Hemi-wedge osteotomy is a good method for treatment of deformities around the knee joint. It can correct large angular deformities without major complications.
Ercan, Serdar; Scerrati, Alba; Wu, Phengfei; Zhang, Jun; Ammirati, Mario
2017-07-01
OBJECTIVE The subtemporal approach is one of the surgical routes used to reach the interpeduncular fossa. Keyhole subtemporal approaches and zygomatic arch osteotomy have been proposed in an effort to decrease the amount of temporal lobe retraction. However, the effects of these modified subtemporal approaches on temporal lobe retraction have never been objectively validated. METHODS A keyhole and a classic subtemporal craniotomy were executed in 4 fresh-frozen silicone-injected cadaver heads. The target was defined as the area bordered by the superior cerebellar artery, the anterior clinoid process, supraclinoid internal carotid artery, and the posterior cerebral artery. Once the target was fully visualized, the authors evaluated the amount of temporal lobe retraction by measuring the distance between the base of the middle fossa and the temporal lobe. In addition, the volume of the surgical and anatomical corridors was assessed as well as the surgical maneuverability using navigation and 3D moldings. The same evaluation was conducted after a zygomatic osteotomy was added to the two approaches. RESULTS Temporal lobe retraction was the same in the two approaches evaluated while the surgical corridor and the maneuverability were all greater in the classic subtemporal approach. CONCLUSIONS The zygomatic arch osteotomy facilitates the maneuverability and the surgical volume in both approaches, but the temporal lobe retraction benefit is confined to the lateral part of the middle fossa skull base and does not result in the retraction necessary to expose the selected target.
Lewandrowski, K U; Lorente, C; Schomacker, K T; Flotte, T J; Wilkes, J W; Deutsch, T F
1996-01-01
Surgical reconstruction of bony defects in the maxillofacial region involves fixation of bony fragments with mini and micro plates. Bone stabilization during hole drilling is often challenging due to the need to apply pressure when using a conventional mechanical Hall drill. In addition, fragmentation of the fragile bones may occur and complicate the reconstruction. The pulsed Er:YAG laser offers an attractive alternative drilling modality because it does not require physical contact with the bone in order to drill holes, cuts bone with minimal thermal damage, and allows precise control of bone cutting. The objective of this study was to investigate the pulsed Er:YAG laser as an alternative to the mechanical bur by comparing bone healing using both modalities. Bone healing in an inferior border defect of the rat mandible was examined using either an Er:YAG laser or a mechanical bur for drilling. The healing of osteotomies in facial bones and of screw holes for plate stabilization of free bone fragments was studied. All defects healed by 4 weeks postoperatively. Histologic evaluation demonstrated no difference in the amount of newly formed woven bone at the osteotomy site or screw holes made by either the laser or the drill. The extent of thermal damage at the osteotomy sites was comparable in laser and mechanically cut bone fragments. On the basis of this study we suggest that the Er: YAG laser can be used clinically in thin, fragile bones in the maxillofacial region.
Correction of complex foot deformities using the Ilizarov external fixator.
Kocaoğlu, Mehmet; Eralp, Levent; Atalar, Ata Can; Bilen, F Erkal
2002-01-01
There are many drawbacks to using conventional approaches to the treatment of complex foot deformities, like the increased risk of neurovascular injury, soft-tissue injury, and the shortening of the foot. An alternative approach that can eliminate these problems is the Ilizarov method. In the current study, a total of 23 deformed feet in 22 patients were treated using the Ilizarov method. The etiologic factors were burn contracture, poliomyelitis, neglected and relapsed clubfoot, trauma, gun shot injury, meningitis, and leg-length discrepancy (LLD). The average age of the patients was 18.2 (5-50) years. The mean duration of fixator application was 5.1 (2-14) months. We performed corrections without an osteotomy in nine feet and with an osteotomy in 14 feet. Additional bony corrective procedures included three tibial and one femoral osteotomies for lengthening and deformity correction, and one tibiotalar arthrodesis in five separate extremities. At the time of fixator removal, a plantigrade foot was achieved in 21 of the 23 feet by pressure mat analysis. Compared to preoperative status, gait was subjectively improved in all patients. Follow-up time from surgery averaged 25 months (13-38). Pin-tract problems were observed in all cases. Other complications were toe contractures in two feet, metatarsophalangeal subluxation from flexor tendon contractures in one foot, incomplete osteotomy in one foot, residual deformity in two feet, and recurrence of deformity in one foot. Our results indicate that the Ilizarov method is an effective alternative means of correcting complex foot deformities, especially in feet that previously have undergone surgery.
Blæhr, Tue Lindberg
2016-01-01
ABSTRACT Objectives The objective of the present systematic review was to test the hypothesis of no difference in transverse skeletal and dental arch expansion and relapse after segmental Le Fort I osteotomy versus surgically assisted rapid maxillary expansion. Material and Methods A MEDLINE (PubMed), Embase and Cochrane library search in combination with a hand-search of relevant journals was conducted by including human studies published in English from January 1, 2000 to June 1, 2016. Results The search provided 130 titles and four studies fulfilled the inclusion criteria. All the included studies were characterized by high risk of bias and meta-analysis was not possible due to considerable variation. Both treatment modalities significantly increase the transverse maxillary skeletal and dental arch width. The transverse dental arch expansion and relapse seems to be substantial higher with tooth-borne surgically assisted rapid maxillary expansion compared to segmental Le Fort I osteotomy. The ratio of dental to skeletal relapse was significantly higher in the posterior maxilla with tooth-borne surgically assisted rapid maxillary expansion. Moreover, a parallel opening without segment tilting was observed after segmental Le Fort I osteotomy. Conclusions Maxillary transverse deficiency in adults can be treated successfully with both treatment modalities, although surgically assisted rapid maxillary expansion seems more effective when large transverse maxillary skeletal and dental arch expansion is required. However, considering the methodological limitations of the included studies, long-term randomized studies assessing transverse skeletal and dental expansion and relapse with the two treatment modalities are needed before definite conclusions can be provided. PMID:28154745
The accuracy of two-dimensional planning for routine orthognathic surgery.
Rustemeyer, Jan; Groddeck, Alexander; Zwerger, Stefan; Bremerich, Andreas
2010-06-01
Two-dimensional cephalometric planning software should be helpful for prediction of hard tissue outcome after bilateral sagittal split ramus osteotomy (BSSRO) or bimaxillary osteotomy, but transferring two-dimensional data to three-dimensions (including mock operation and surgery) may result in errors. The objective of this retrospective study was to analyze deviations between predicted results and postoperative outcome using cephalometric analyses, and to evaluate this procedure for daily use. Fifty-four subjects (mean (SD) age 26 (8) years) had a BSSRO (n=21) alone or in combination with Le Fort I osteotomy (n=33). Predictions were made for each case by cephalometric planning software and mock operations done with study models. Postoperative cephalograms were obtained after 14 days and compared with predicted cephalograms for sagittal (SNA, SNB, ANB,) and vertical (ArMeGo, ML-NSL, NL-NSL) measurements. Mean (SD) differences for all measurements varied between 1.3 degrees (1.1 degrees) and 2.2 degrees (1.6 degrees) for BSSRO; and between 1.1 degrees (1.3 degrees) and 2.2 degrees (1.6 degrees) for bimaxillary osteotomy. There were no significant differences between measurements or operations, indicating that the predictions were accurate. A difference of up to 8.5 degrees could be measured in a single case. Cephalometric prediction therefore remains an accurate tool for planning, particularly maxillary rearrangement in the vertical and sagittal dimension for routine operations. If greater shifts in the transversal dimension are necessary, exact planning should be adapted with three-dimensional planning devices to avoid significant differences. Copyright 2009 The British Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.
Developmental dysplasia of the hip in the newborn: A systematic review
Gulati, Vivek; Eseonu, Kelechi; Sayani, Junaid; Ismail, Nizar; Uzoigwe, Chika; Choudhury, Muhammed Zaki; Gulati, Pooja; Aqil, Adeel; Tibrewal, Saket
2013-01-01
Developmental dysplasia of the hip (DDH) denotes a wide spectrum of conditions ranging from subtle acetabular dysplasia to irreducible hip dislocations. Clinical diagnostic tests complement ultrasound imaging in allowing diagnosis, classification and monitoring of this condition. Classification systems relate to the alpha and beta angles in addition to the dynamic coverage index (DCI). Screening programmes for DDH show considerable geographic variation; certain risk factors have been identified which necessitate ultrasound assessment of the newborn. The treatment of DDH has undergone significant evolution, but the current gold standard is still the Pavlik harness. Duration of Pavlik harness treatment has been reported to range from 3 to 9.3 mo. The beta angle, DCI and the superior/lateral femoral head displacement can be assessed via ultrasound to estimate the likelihood of success. Success rates of between 7% and 99% have been reported when using the harness to treat DDH. Avascular necrosis remains the most devastating complication of harness usage with a reported rate of between 0% and 28%. Alternative non-surgical treatment methods used for DDH include devices proposed by LeDamany, Frejka, Lorenz and Ortolani. The Rosen splint and Wagner stocking have also been used for DDH treatment. Surgical treatment for DDH comprises open reduction alongside a combination of femoral or pelvic osteotomies. Femoral osteotomies are carried out in cases of excessive anteversion or valgus deformity of the femoral neck. The two principal pelvic osteotomies most commonly performed are the Salter osteotomy and Pemberton acetabuloplasty. Serious surgical complications include epiphyseal damage, sciatic nerve damage and femoral neck fracture. PMID:23610749
Ueki, Koichiro; Hashiba, Yukari; Marukawa, Kohei; Nakagawa, Kiyomasa; Okabe, Katsuhiko; Yamamoto, Etsuhide
2009-12-01
Understanding the anatomy of the pterygomaxillary junction region helps prevent blood loss in Le Fort I osteotomy. Here, we determined the location of the descending palatine artery and the structure of the pterygomaxillary region. The study group consisted of 82 Japanese patients with mandibular prognathism and asymmetry, with and without maxillary retrognathism or asymmetry. A total of 164 sides were measured and divided into right versus left, men versus women, and bimaxillary osteotomy (B) versus mandibular osteotomy (S). Lateral and frontal cephalograms and computed tomography (CT) were analysed for all patients. The relationship between the cephalometric measurements and the measurements of the descending palatine artery and pterygoid plate (PP) were assessed. There were no significant correlations between measurements of cephalograms and those of the descending palatine artery and PPs. There were significant differences between right and left in lateral plate length (p=0.0014) and thickness of PP (p=0.0047). There were significant differences between men and women in right width of PP (p=0.0034), right thickness of PP (p=0.0063), left posterior length (p=0.0196), and left thickness of PP (p=0.0279). The B group had a shorter anterior length than the S group (right: p<0.0001, left: p=0.0027). These results suggest that the location of the descending palatine artery and the morphology of the PPs were not significantly associated with any cephalometric measurements. CT examination is necessary to recognize the anatomy of pterygomaxillary region and the exact positions of descending palatine artery before Le Fort I osteotomy.
Lazaridis, Konstantinos; Athanasiou, Athanasios E.
2018-01-01
Introduction: Le Fort I and sagittal split ramus osteotomies are the most commonly performed orthognathic surgery procedures on the maxilla and mandible, respectively. Techniques: Despite progress in the techniques, these procedures may still be associated with morbidity, expressed as inflammation, inadequate bony union, periodontal damages or in extreme cases even total bone loss. Discussion: Through a comprehensive review of the literature, the influences of maxillary and mandibular surgery on Pulpal Blood Flow (PBF), pulp sensitivity and pulp vitality are examined. Moreover, adverse effects of maxillary surgery on tooth color and periodontal tissues are also reported. The effects had a variety of expression. Concerning maxillary surgery, some studies showed an initial increase in PBF followed by a decrease to the baseline or even lower levels after 1-3 months. Other studies found an initial decrease in PBF followed by an increase soon after. There were also studies that showed no significant PBF changes, in contrast. Conclusion: Concerning mandibular surgery, a recent study showed a decrease in PBF immediately after sagittal split ramus osteotomy. Some authors detected tooth discoloration of maxillary teeth after Le Fort I osteotomy. Root resorption and root injury were also detected, but were of minor significance. Usually, these adverse effects derive from injury of the vessels of the palatal pedicle. This pedicle should be maintained intact for the avoidance of blood flow impairments. In addition, the descending palatine artery should be protected during maxillary surgery procedures in order to maintain the highest possible blood flow on the maxillary teeth. PMID:29456771
Larrainzar-Garijo, R; Cifuentes de la Portilla, C; Gutiérrez-Narvarte, B; Díez-Nicolás, E; Bayod, J
2018-06-12
Medializing calcaneal osteotomy forms part of the treatment options for adult acquired flat foot. The structural correction that is achieved is widely known. However, the effect of this procedure on the soft tissues that support the plantar arch has been little studied, since it is not possible to quantify experimentally the tension and deformation variations generated. Therefore, the objective of this study was to evaluate the effect of medializing calcaneal osteotomy on the soft tissue that supports the plantar arch, using a computational model of the human foot designed with a clinical approach. The proposed finite element model was reconstructed from computerized tomography images of a healthy patient. All the bones of the foot, the plantar fascia, cartilages, plantar ligaments and the calcaneus-navicular ligament were included, respecting their anatomical distribution and biomechanical properties. Simulations were performed emulating the monopodal support phase of the human walk of an adult. The effect on each tissue was evaluated according to clinical and biomechanical criteria. The results show that calcaneal osteotomy reduces the tension normally generated on the evaluated tissues, with the effect on the calcaneus-navicular ligament and the plantar fascia being the most notable. The deformation results obtained are consistent with experimental tests and clinical knowledge. The versatility of this model allows the objective assessment of different conditions and supports decision making for the treatment of adult acquired flat foot in middle and advanced stages. Copyright © 2018 SECOT. Publicado por Elsevier España, S.L.U. All rights reserved.
Comparison of piezosurgery and traditional saw in bimaxillary orthognathic surgery.
Spinelli, Giuseppe; Lazzeri, Davide; Conti, Marco; Agostini, Tommaso; Mannelli, Giuditta
2014-10-01
Investigators have hypothesised that piezoelectric surgical device could permanently replace traditional saws in conventional orthognathic surgery. Twelve consecutive patients who underwent bimaxillary procedures were involved in the study. In six patients the right maxillary and mandible osteotomies were performed using traditional saw, whilst the left osteotomies by piezoosteotomy; in the remaining six patients, the surgical procedures were reversed. Intraoperative blood loss, procedure duration time, incision precision, postoperative swelling and haematoma, and nerve impairment were evaluated to compare the outcomes and costs of these two procedures. Compare to traditional mechanical surgery, piezoosteotomy showed a significant intraoperative blood loss reduction of 25% (p = 0.0367), but the mean surgical procedure duration was longer by 35% (p = 0.0018). Moreover, the use of piezoosteotomy for mandible procedure required more time than for the maxillary surgery (p = 0.0003). There was a lower incidence of postoperative haematoma and swelling following piezoosteotomy, and a statistically significant reduction in postoperative nerve impairment (p = 0.003). We believe that piezoelectric device allows surgeons to achieve better results compared to a traditional surgical saw, especially in terms of intraoperative blood loss, postoperative swelling and nerve impairment. This device represents a less aggressive and safer method to perform invasive surgical procedures such as a Le Fort I osteotomy. However, we recommend the use of traditional saw in mandible surgery because it provides more foreseeable outcomes and well-controlled osteotomy. Further studies are needed to analyse whether piezoosteotomy could prevent relapse and promote bony union in larger advancements. Copyright © 2014 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.
Baig, M N; Baig, Usman; Tariq, Ali; Din, Robert
2017-09-20
Introduction Hallux valgus is one of the most common forefoot deformities worldwide. Females are affected more often than males. The three most common clinical symptoms are the painful bunion, transfer metatarsalgia, and hammer or claw toes. Methods This case series consisted of 20 patients who had chevron osteotomy from January 2015 to January 2016. The clinical assessment was measured by The American Orthopedic Foot and Ankle Score (AOFAS), and radiologic assessment was determined by preoperative and postoperative hallux valgus angle (HVA) and intermetatarsal angle (IMA). Results The patients' mean age was 56 years. Out of 20 patients, 19 were female, and one was male. The mean AOFAS improved from 51 preoperatively to 82 postoperatively. The HVA improved from 26° preoperatively to 14°. There were five complications including four Kirschner (K)-wire complications. Conclusion Distal chevron osteotomy is a reliable and time-tested procedure. The K-wire fixation has a relatively high complication rate. We planned to use other methods of fixation and then compared them with K-wires fixation results for future studies.
Baig, Usman; Tariq, Ali; Din, Robert
2017-01-01
Introduction Hallux valgus is one of the most common forefoot deformities worldwide. Females are affected more often than males. The three most common clinical symptoms are the painful bunion, transfer metatarsalgia, and hammer or claw toes. Methods This case series consisted of 20 patients who had chevron osteotomy from January 2015 to January 2016. The clinical assessment was measured by The American Orthopedic Foot and Ankle Score (AOFAS), and radiologic assessment was determined by preoperative and postoperative hallux valgus angle (HVA) and intermetatarsal angle (IMA). Results The patients’ mean age was 56 years. Out of 20 patients, 19 were female, and one was male. The mean AOFAS improved from 51 preoperatively to 82 postoperatively. The HVA improved from 26° preoperatively to 14°. There were five complications including four Kirschner (K)-wire complications. Conclusion Distal chevron osteotomy is a reliable and time-tested procedure. The K-wire fixation has a relatively high complication rate. We planned to use other methods of fixation and then compared them with K-wires fixation results for future studies. PMID:29167752
Bad splits in bilateral sagittal split osteotomy: systematic review of fracture patterns.
Steenen, S A; Becking, A G
2016-07-01
An unfavourable and unanticipated pattern of the mandibular sagittal split osteotomy is generally referred to as a 'bad split'. Few restorative techniques to manage the situation have been described. In this article, a classification of reported bad split pattern types is proposed and appropriate salvage procedures to manage the different types of undesired fracture are presented. A systematic review was undertaken, yielding a total of 33 studies published between 1971 and 2015. These reported a total of 458 cases of bad splits among 19,527 sagittal ramus osteotomies in 10,271 patients. The total reported incidence of bad split was 2.3% of sagittal splits. The most frequently encountered were buccal plate fractures of the proximal segment (types 1A-F) and lingual fractures of the distal segment (types 2A and 2B). Coronoid fractures (type 3) and condylar neck fractures (type 4) have seldom been reported. The various types of bad split may require different salvage approaches. Copyright © 2016 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.
Endoscopic-assisted osteotomies for the treatment of craniosynostosis.
Hinojosa, J; Esparza, J; Muñoz, M J
2007-12-01
The development of multidisciplinar units for Craniofacial Surgery has led to better postoperative results and a considerable decrease in morbidity in the treatment of complex craniofacial patients. Standard correction of craniosynostosis involves calvarial remodeling, often considerable blood losses that need to be replaced and lengthy hospital stay. The use of minimally invasive techniques for the correction of some of these malformations are widespread and allows the surgeon to minimize the incidence of complications by means of a decreased surgical time, blood salvage, and shortening of postoperative hospitalization in comparison to conventional craniofacial techniques. Simple and milder craniosynostosis are best approached by endoscopy-assisted osteotomies and render the best results. Extended procedures other than simple suturectomies have been described for more severe patients. Different osteotomies resembling standard fronto-orbital have been developed for the correction, and the use of postoperative cranial orthesis may improve the final cosmetic appearance. Thus, endoscopic-assisted procedures differ from the simple strategy of single suture resection that rendered insufficient results in the past, and different approaches can be tailored to solve these cases in patients in the setting of a case-to-case bases.
Brüllmann, Dan; Jürchott, Lena Marie; John, Christoph; Trempler, Christina; Schwanecke, Ulrich; Schulze, Ralf K W
2014-01-01
The present study tested the reliability of an optical scanning device for the objective assessment of postoperative facial swelling. Twenty control subjects bearing a defined volume of water (10-30 mL) in an intraorally carried balloon were tested to assess the measurement accuracy of the device. As a proof of concept, facial volumes of 59 surgical cases were recorded before osteotomy and 1 and 7 days after intervention with the use of a structured light scanner. The median difference between the applied and the measured volumes was 0.67 mL for the control test with the artificial swelling simulated using water balloons. For subjects having third molar osteotomy, extraoral volume increased to 5.29 cm(3) 1 day after surgery (95% CI 5.22-8.52) and decreased to 0.00 mL (95% CI 0.85-2.55) after 7 days. Contact-free visible-light 3-dimensional scanning is reliable for the objective assessment of postoperative facial swelling. Copyright © 2014 Elsevier Inc. All rights reserved.
Non-union in 3 of 15 osteotomies of the distal radius without bone graft
Scheer, Johan H; Adolfsson, Lars E
2015-01-01
Background and purpose Open-wedge osteotomies of the distal radius create a void that is usually filled with either iliac crest bone graft or bone substitute. Previous studies have suggested that this is unnecessary. We investigated the safety of omitting the filling procedure. Patients and methods We included 15 patients with a dorsal malunion of a distal radius fracture. A palmar approach and angle-stable plates were used. The patients were followed until there was radiographic and clinical healing. Results Non-union occurred in 3 of the 15 patients. The study, which had been planned to include 25 patients, was then discontinued. 6 osteotomies created a trapezoid void (no cortical contact); 3 of these did not unite after the index procedure (p = 0.04), but did subsequently, after autogenous bone grafting. A trapezoid void was significantly associated with non-union (p = 0.04). Interpretation When a trapezoid defect is created, one should consider bone substitute or autogenous bone graft. This has been shown to be safe in other studies. PMID:25619425
Kaewpornsawan, Kamolporn; Tangsataporn, Suksan; Jatunarapit, Ratiporn
2005-10-01
To find the effectiveness of the early surgery (2-3 years of age)as a very important prognostic factor affecting the outcomes in Thai children with infantile tibia vara and all the prognostic factors including the usefulness of arthrographic study in correcting the deformity. From 1994 to 2004, sixteen children aged average 3.61 years old (2.08-7.0) were treated in Siriraj Hospital and diagnosed as infantile tibia vara by Langenskiold radiographic staging were included in the present study and retrospectively reviewed with an average of 6.4 years follow up (range 6 month - 11.1 years). All cases were initially treated by surgery because of low compliance for brace or brace failure. They consisted of 3 boys and 13 girls. There were 24 legs including the bilateral involvement in 8 cases (2 boy and 6 girls). After arihrography, the midshaft fibular osteotomy was performed then the proximal tibial dome-shaped valgus osteotomy was done and fixed with 2 pins. The desired position was 12 degree knee valgus . The patients were divided in two groups, 1)group A,the successful group with the knee becoming normal without any deformity after single osteotomy, 2)group B,the recurrent group with recurrence of the varus deformity required further corrective osteotomies to make normal axis of the knee. All variables were analyzed and compared between group A and group B. The general characteristics and radiographic findings were recorded in 1)age, 2)sex, 3)side, 4)weight in kilogram and in percentage of normal or overweight(obesity) compared with the standard Thai weight chart, 5)tibiofemoral angle (TFA) pre and postoperative treatment, 6) metaphyseal diaphyseal angle (MDA), 7)the medial physeal slope angle (MPS, 8)The preoperative arthrographic articulo-diaphyseal angle (ADA), 9.arthrographic articulo-medial physeal angle (AMPA). There were 14 legs in group A and the remaining 10 legs were in group B (average 2.4 operations). All cases healed in good alignment of the legs without major complication. All patients who were operated on early before 3 years old were 100% cured by single osteotomy in group A(11 legs). Arthrography was useful in evaluating the knee joint and drawing the angle. Considering the prognostic factors affecting the outcomes after surgery, there were 6 prognostic factors . First, the age less than 3 years old (P<0.001). Second, the normal weight (P<0.047). Third, the Langenskiold stage 1-2 (P=0.002). Fourth, the MPS angle equal or less than 59 degree (P < 0.001). Fifth, the ADA preperative angle equal or less than 18 degrees (P<0.001). Sixth and the last factor, the TFA angle postoperative treatment, equal or more than 10 degrees valgus (mean 13 degrees valgus) (P=0.009).In multivariate analysis with stepwise logistic regression of these 6 prosnostic factors, the MPS angle had the most important significance. The proximal tibial valgus osteotomy was a very important factor(P < 0.001). The 6 prognostic factors and usefulness of arthrography were identified. The authors suggest that surgery should be performed early in Thai children who have met these criterias 1)age of the patients more than 2 years old, 2)Langenskiold roentgenographic characteristics of infantile tibia vara stage 2 or more at the time of diagnosis, 3)Low compliance for brace treatment.or brace failure but not more than 3 years old. The surgery should not be delayed more than 3 years of age by waiting for effectiveness of brace treatment in Thai children with infantile tibia vara. The early proximal valgus dome- shaped osteotomy was a very important controllable prognostic factor by surgeon decision.
A Bony Landmark 'RAI Triangle' to Prevent 'Misplaced and Misdirected' Medial Cut in SSRO.
Rai, Kirthi Kumar; Arakeri, Gururaj; Khaji, Shahanavaj I
2011-03-01
'Rai triangle', a new anatomic landmark on the medial surface of the ramus of the mandible which when identified and taken into consideration, may have a definite advantage. This is especially in terms of performing the medial horizontal cut which is an important and integral part of the sagittal split ramus osteotomy so as to avoid a bad split. The objective of this article is to propose an easily identifiable bony land mark, which is closely related to lingula of mandible that may ease the procedure of osteotomy and avoid bad splits.
Surgical correction of pectus arcuatum
Ershova, Ksenia; Adamyan, Ruben
2016-01-01
Background Pectus arcuatum is a rear congenital chest wall deformity and methods of surgical correction are debatable. Methods Surgical correction of pectus arcuatum always includes one or more horizontal sternal osteotomies, resection of deformed rib cartilages and finally anterior chest wall stabilization. The study is approved by the institutional ethical committee and has obtained the informed consent from every patient. Results In this video we show our modification of pectus arcuatum correction with only partial sternal osteotomy and further stabilization by vertical parallel titanium plates. Conclusions Reported method is a feasible option for surgical correction of pectus arcuatum. PMID:29078483
Thordarson, David
2018-06-01
Bunion surgery almost invariably involves osteotomies and open incisions. Recently, some surgeons have been performing minimally invasive osteotomies with less morbidity, more rapid healing, and good results. These surgeries are heavily technique dependent, and other surgeons cannot always reproduce these results. Endoscopically assisted bunion surgery yielded excellent results at 10 years in this study but will likely never be used commonly because of the extremely demanding surgical technique and requisite learning curve. Copyright © 2018 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.
Burchard, Rene; Braas, Sabrina; Soost, Christian; Graw, Jan Adriaan; Schmitt, Jan
2017-08-07
The main objective of every new development in total hip arthroplasty (THA) is the longest possible survival of the implant. Periprosthetic stress shielding is a scientifically proven phenomenon which leads to inadvertent bone loss. So far, many studies have analysed whether implanting different hip stem prostheses result in significant preservation of bone stock. The aim of this preclinical study was to investigate design-depended differences of the stress shielding effect after implantation of a selection of short-stem THA-prostheses that are currently available. Based on computerised tomography (CT), a finite elements (FE) model was generated and a virtual THA was performed with different stem designs of the implant. Stems were chosen by osteotomy level at the femoral neck (collum, partial collum, trochanter sparing, trochanter harming). Analyses were performed with previously validated FE models to identify changes in the strain energy density (SED). In the trochanteric region, only the collum-type stem demonstrated a biomechanical behaviour similar to the native femur. In contrast, no difference in biomechanical behaviour was found between partial collum, trochanter harming and trochanter sparing models. All of the short stem-prostheses showed lower stress-shielding than a standard stem. Based on the results of this study, we cannot confirm that the design of current short stem THA-implants leads to a different stress shielding effect with regard to the level of osteotomy. Somehow unexpected, we found a bone stock protection in metadiaphyseal bone by simulating a more distal approach for osteotomy. Further clinical and biomechanical research including long-term results is needed to understand the influence of short-stem THA on bone remodelling and to find the optimal stem-design for a reduction of the stress shielding effect.
Yu, Bin; Zhu, Ke; Zhao, Deng; Wang, Fei; Liang, Yijian
2016-02-01
A case report of treatment of extreme tuberculous kyphosis using spinal osteotomy and halopelvic traction. The aim of this study was to describe the process and outcome of treatment of a case with extreme tuberculous kyphosis using spine osteotomy and halo-pelvic traction. Spinal tuberculosis causes destruction, deformity, and paraplegia. Long-standing kyphosis may progress with growth in children, and produces respiratory insufficiency, and neurologic deficit. Surgery may help to prevent or reverse the neurological deterioration, while improving pulmonary function in cases with significant spinal deformity. Review of records and radiographs. A 24-year-old female with tuberculous angular kyphosis presented with bilateral lower extremities paresis and dyspnea. The vertebral bodies from T3 to T9 were severely destructed, with a Cobb's angle of 180°on radiographs. The total duration of distraction using halopelvic apparatus kept 10 months. During the duration of traction, the patient underwent a posterior release surgery because flexibility of the kyphosis was not sufficient. Pedicle subtraction osteotomy and pedicle screw fixation were performed to achieve final correction when the Cobb's angle decreased to about 80°. After the whole treatment of halopelvic traction and spine ostetomy, the patient's height increased nearly 30 cm, whereas the angular kyphosis was corrected to a Cobb's angle of 30°. The patient had no complication and neurological deterioration during the treatment. Correction angle and good sagittal balance were well maintained in the duration of 2 years' follow-up. The halo-pelvic apparatus produces high corrective forces applied over a long period, and it provides a slow and safe correction of deformity. In cases of extreme kyphotic deformity, halopelvic traction is an appropriate technique, while avoiding many serious complications from a rapid, one-stage correction. N/A.
Kim, Jin Su; Cho, Hun Ki; Young, Ki Won; Kim, Ji Soo; Lee, Kyung Tai
2017-12-01
Fixation of proximal chevron metatarsal osteotomy has been accomplished using K-wires traditionally and with a locking plate recently. However, both methods have many disadvantages. Hence, we developed an intramedullary fixation technique using headless cannulated screws and conducted a biomechanical study to evaluate the superiority of the technique to K-wire and locking plate fixations. Proximal chevron metatarsal osteotomy was performed on 30 synthetic metatarsal models using three fixation techniques. Specimens in group I were fixated with K-wires (1.6 mm × 2) and in group II with headless cannulated screws (3.0 mm × 2) distally through the intramedullary canal. Specimens in group III were fixated with a locking X-shaped plate (1.3-mm thick) and screws (2.5 mm × 4). Eight metatarsal specimens were selected from each group for walking fatigue test. Bending stiffness and dorsal angulation were measured by 1,000 repetitions of a cantilever bending protocol in a plantar to dorsal direction. The remaining two samples from each group were subjected to 5 mm per minute axial loading to assess the maximal loading tolerance. All samples in group I failed walking fatigue test while group II and group III tolerated the walking fatigue test. Group II showed greater resistance to bending force and smaller dorsal angulation than group III ( p = 0.001). On the axial loading test, group I and group II demonstrated superior maximum tolerance to group III (54.8 N vs. 47.2 N vs. 28.3 N). Authors have demonstrated proximal chevron metatarsal osteotomy with intramedullary screw fixation provides superior biomechanical stability to locking plate and K-wire fixations. The new technique using intramedullary screw fixation can offer robust fixation and may lead to better outcomes in surgical treatment of hallux valgus.
Kim, Hyong-Nyun; Suh, Dong-Hyun; Hwang, Pil-Sung; Yu, Sun-O; Park, Yong-Wook
2011-04-01
The purpose of this study was to evaluate the clinical results of distal chevron osteotomy performed in conjunction with selective lateral soft tissue release. The criterion for doing a lateral soft tissue release was assessed by determining the ease and completeness of passive hallux valgus correction at the time of surgery. Between August 2005 and November 2007, 48 feet in 43 patients classified as having mild to moderate hallux valgus were retrospectively studied. Distal chevron osteotomy without lateral soft tissue release was performed in 26 cases (Group 1) when passive correction of the hallux valgus deformity was possible. Distal chevron osteotomy with lateral soft tissue release was performed in 22 cases (Group 2) when passive correction was not possible. Average followup was 23 (range, 12 to 28) months. Clinical results were assessed using radiographic parameters [hallux valgus angle (HVA), first and second intermetatarsal angle (1,2 IMA)], AOFAS scale and patient's subjective satisfaction. For Group 1: the average correction of HVA was 12.8 degrees, the average correction of IMA was 4.7 degrees, and the AOFAS score improved an average of 29.2 points at the last followup. Thirteen patients were very satisfied and ten patients were satisfied with the results. No patient was dissatisfied. For Group 2: the average correction of HVA was 19.1 degrees, the average correction of IMA was 7 degrees and AOFAS score improved at an average of 31.8 points at the last followup. Twelve patients were very satisfied, seven patients were satisfied and one patient, who had stiffness of the first metatarsophalangeal joint, was dissatisfied with the result. Distal chevron osteotomy with selective lateral soft tissue release based on the ability to passively correct the hallux valgus deformity lead to safe and stable correction.
Cho, Byung-Ki; Park, Kyoung-Jin; Choi, Seung-Myung; Kang, Sang-Woo; Lee, Hyung-Ki
2016-12-01
Although a ball and socket ankle deformity is usually congenital and asymptomatic, abnormal inversion and eversion mobility can result in recurrent ankle sprain and osteoarthritis. This retrospective study was performed to evaluate the clinical and radiologic outcomes of ankle fusion combined with calcaneal sliding osteotomy for severe arthritic ball and socket ankle deformity. Fourteen patients with severe arthritic ball and socket ankle deformity were followed for more than 3 years after operation. The clinical evaluation consisted of American Orthopaedic Foot & Ankle Society (AOFAS) score, Foot and Ankle Ability Measure (FAAM), visual analog scale (VAS) for pain, and subjective satisfaction score. The period to fusion and union of osteotomy, the change of hindfoot alignment angle, and complications were evaluated radiologically. AOFAS and FAAM scores were significantly improved from an average of 37.4 and 34.5 points to 74.6 and 78.5 points, respectively. VAS for pain with walking over 20 minutes was significantly improved from an average of 8.4 points to 1.9 points. The average satisfaction score of patients was 88.9 points. The difference in heel alignment angle (compared to contralateral side) was significantly improved from an average of 34.8 to 5.4 degrees. There were 2 cases of progressive arthritis in an adjacent joint and 1 case of failed fusion. Ankle fusion combined with calcaneal sliding osteotomy can be an effective operative option for ball and socket ankle deformity with advanced arthritis. In spite of increased complication rate, reliable pain relief, and restoration of gait ability through correcting hindfoot malalignment could improve the quality of life. Level IV, retrospective case series. © The Author(s) 2016.
The Reverse Ludloff Osteotomy for Bunionette Deformity.
Waizy, Hazibullah; Jastifer, James R; Stukenborg-Colsman, Christina; Claassen, Leif
2016-08-01
Background The typical bunionette deformity often presents as pain over the lateral margin of the fifth metatarsal head. There have been numerous operative treatments described for this pathology. The purpose of this study was to evaluate the results after a reverse Ludloff osteotomy in cases of severe bunionette deformities. Methods Between 2008 and 2012, 16 patients received a reverse Ludloff osteotomy of the fifth metatarsal due to a symptomatic type II or III bunionette that failed nonoperative treatment. We retrospectively reviewed charts, radiographic images, postoperative AOFAS (American Orthopaedic Foot and Ankle Society) lesser toe scores, and the EQ-5D at a mean of 41.9 months (range, 31-74 months) of follow-up. Additionally, limitation in activities of daily living, pain, and patient satisfaction were assessed. Results At latest follow-up, the mean AOFAS lesser toe score was 86.6 points and the mean EQ-5D score was 14.1. Fifteen patients had no or only little limitations. Fifteen out of 16 patients were satisfied or predominantly satisfied. Radiographic analysis showed for type II deformities a correction of the lateral bowing from 8.1° down to 0.67° (P < .001). The fourth-fifth intermetatarsal angle (4-5 IMA) improved from a mean of 13.2° to a mean of 5.2° (P < .001). The length of the fifth metatarsal was unchanged (P > .05). There were no observed complications, and no revision was necessary. Conclusion In the present study, the reverse Ludloff osteotomy had a high satisfaction rate and no complications. It provided radiographic correction of the deformity and may be considered in the surgical treatment of severe bunionette deformities. Therapeutic, Level IV: Case series. © 2016 The Author(s).
Maranho, D A; Kim, Y-J; Williams, K A; Novais, E N
2018-02-01
To investigate the outcomes of an anteverting triple periacetabular osteotomy for the treatment of hip instability in skeletally immature patients with Down syndrome. We evaluated 16 patients (21 hips) with Down syndrome and hip instability who underwent an anteverting triple periacetabular osteotomy between 2007 and 2016. There were nine females and seven males with an average age of 7.4 years SD 2.0. We assessed the level of hip pain, gait ability and clinical stability at a minimum of one year after surgery. Radiographic evaluation included pre- and postoperative lateral centre-edge angle (LCEA), Tönnis acetabular angle and extrusion index. After an average follow-up of 4.1 years SD 2.6, 20 of 21 hips (95%) remained clinically stable. In all, 12 of 16 (75%) patients had a full gait without a major limp, but three patients (19%) had a persistent limp. Of the 21 procedures, one hip (5%) was considered a failure due to persistent instability. There was a mean increase of 18.3º SD 15.3º of the LCEA (p < 0.001); a mean decrease of 15.2º SD 11.6º (p < 0.001) for the Tönnis angle and the extrusion index had a mean decrease of 0.27 SD 0.20 (p < 0.001). The most common complications were minor and included nonunion of the pubis or ischium (24%) and stress fractures of the pubis and ischium (14%). Only one patient required unplanned surgery for the treatment of an infection; which was considered a major complication. The anteverting triple periacetabular osteotomy provided global deformity correction and achieved hip stability in 95% of the hips after a mean follow-up of 4.1 years. Therapeutic level IV.
Sadek, Ahmed F; Osman, Mohammed K; Laklok, Mohamed A
2016-10-01
The aim of this study was to assess the effect of degree of anterior translation of the distal tibial fragment after lateral closing wedge high tibial osteotomy in patients having combined knee medial compartmental and patellofemoral osteoarthritis. A retrospective study was conducted on 64 patients who were operated on for combined knee medial compartmental and patellofemoral osteoarthritis, by lateral closing wedge high tibial osteotomy with anterior translation of the distal tibial fragment. They were divided into two groups; Group I comprising 32 patients (34 knees, mean age of 51.4±7years) whose degree of anterior translation was <1cm and Group II comprising 32 patients (33 knees, mean age of 52.2±8.3years) whose degree of anterior translation was >1.5cm. The final assessment was performed via: visual analog scale, postoperative Knee Society clinical rating system function score, active range of motion, time to union, degree of correction of mechanical axis, posterior tibial slope, and Insall-Salvati ratio. Group II patients exhibited statistically superior mean postoperative score and better return to their work than Group I (P=0.013, 0.076, respectively). Both groups showed statistically significant differences between the preoperative and postoperative evaluation parameters (P<0.001). The posterior tibial slope was decreased in both groups but with no significant difference (P=0.527). Lateral closing wedge high tibial osteotomy combined with anterior translation of the distal tibial fragment more than 1.5cm achieved significantly better postoperative functional knee score. Both groups exhibited comparatively decreased posterior tibial slope. Copyright © 2016 Elsevier B.V. All rights reserved.
Kim, Hui Taek; Lee, Tae Hoon; Ahn, Tae Young; Jang, Jae Hoon
Because the use of magnetic resonance imaging is still not universal for the patients with developmental dysplasia of the hip patients, orthopaedists do not generally distinguish widened joint spaces which are "empty" after primary treatment (and therefore still reducible), from those which are filled and much more difficult to treat. To date no studies have focused on the latter hips. We treated and observed the outcomes for 19 hips which showed filled joint spaces after primary treatment. We retrospectively reviewed 19 cases of developmental dysplasia of the hip: (1) who showed a widened joint space on radiographs after primary treatment; and (2) whose magnetic resonance imaging showed that the widened joint space was accompanied by acetabular cartilage hypertrophy and/or was filled with fibrous tissues. All patients were over 1 year old at the time of primary reduction (reduction was closed in 4 patients, open in 6, and open with pelvic osteotomy in 9). Thirteen patients received at least 1 secondary treatment. Final results were classified using a modified Severin classification. Final outcomes were satisfactory in 10 (52.6%) and unsatisfactory in 9 (47.4%). The widened joint spaces gradually filled with bone, resulting in a shallow acetabulum in the patients with unsatisfactory results. Of 9 patients who underwent combined pelvic osteotomy at the time of primary reduction, results were satisfactory in 6 (66.7%), whereas all patients who had only closed or open primary reduction had unsatisfactory results. Combined pelvic osteotomy at the time of primary reduction is advisable in hips with widened joint spaces. However, hips with filled joint spaces after primary treatment often have unsatisfactory results even after additional pelvic and/or femoral osteotomy. Level IV-prognostic study.
Pogorzelski, J; Braun, S; Imhoff, A B; Beitzel, K
2016-12-01
Treatment of posterior shoulder instability with increased retroversion of the glenoid using open-wedge osteotomy of the glenoid neck stabilized with an autologous bone block. Symptomatic, atraumatic posterior shoulder instability with increased retroversion (>20°) of the glenoid and previously failed conservative or surgical treatment. General contraindications against surgery. Relative contraindications: osteoporosis, nicotine abuse, or suspected patient noncompliance. Posterior approach with a 7 cm long incision starting medial of the posterolateral corner of the acromion heading to the posterior axillary fold and subsequent preparation of the deltoid muscle and the infraspinatus muscle. The posterior glenohumeral capsule is incised by performing a capsular T‑shift. The osteotomy is performed intracapsulary medial to the genoid rim. The wedge bone graft, harvested from spina scapulae or iliac spine, is placed "press fit" in position. Additional fixation of the graft is not necessary if the anterior cortex is intact. For reinforcing the posterior capsule, a posterior capsule shift should be performed. Insertion of extracapsular wound drainage. Successive wound closure. Postoperative immobilization in a 0° shoulder orthesis for 6 weeks; avoidance of horizontal abduction for 8 weeks. After removing the wound drainage, start of limited active-assisted range of motion. Over-head sports after 6 months. From 2009-2015, 6 posterior open wedge glenoid osteotomies were performed. Postoperative retroversion of the glenoid was 11.2 ± 9.4° compared to 26.0 ± 8.6° before surgery. Of 6 shoulders, 2 showed postoperative signs of persistent posterior instability; the other 4 shoulders were free of complaints. No revision surgery was needed.
Buell, Thomas J; Buchholz, Avery L; Quinn, John C; Mullin, Jeffrey P; Garces, Juanita; Mazur, Marcus D; Shaffrey, Mark E; Yen, Chun-Po; Shaffrey, Christopher I; Smith, Justin S
2018-06-16
Pedicle subtraction osteotomy (PSO) is an effective technique to correct fixed sagittal malalignment. A variation of this technique, the "trans-discal" or "extended" PSO (Schwab grade IV osteotomy), involves extending the posterior wedge resection of the index vertebra to include the superior adjacent disc for radical discectomy. The posterior wedge may be resected in asymmetric fashion to correct concurrent global coronal malalignment.This video illustrates the technical nuances of an extended asymmetrical lumbar PSO for adult spinal deformity. A 62-yr-old female with multiple prior lumbar fusions presented with worsening back pain and posture. Preoperative scoliosis X-rays demonstrated severe global sagittal and coronal malalignment (sagittal vertical axis [SVA, C7-plumbline] of 13.5 cm, pelvic incidence [PI] of 60°, lumbar lordosis [LL] of 14° [in kyphosis], pelvic tilt [PT] of 61°, thoracic kyphosis [TK] of 18°, and rightward coronal shift of 9.3 cm). The patient gave informed consent to surgery and for use of her imaging for medical publication. Briefly, surgery first involved transpedicular instrumentation from T10 to S1 with bilateral iliac screw fixation, and then T11-12 and T12-L1 Smith-Petersen osteotomies were performed. Next, an extended asymmetrical L4 PSO was performed and a 12° lordotic cage (9 × 14 × 40 mm) was placed at the PSO defect. Rods were placed from T10 to iliac bilaterally, and accessory supplemental rods spanning the PSO were attached. Postoperative scoliosis X-rays demonstrated improved alignment: SVA 5.5 cm, PI 60°, LL 55°, PT 36°, TK 37°, and 3.7 cm of rightward coronal shift. The patient had uneventful recovery.
Assessment of the OsteoMark-Navigation System for Oral and Maxillofacial Surgery
Peacock, Zachary S.; Magill, John C.; Tricomi, Brad J.; Murphy, Brian A.; Nikonovskiy, Vladimir; Hata, Nobuhiko; Chauvin, Laurent; Troulis, Maria J.
2015-01-01
Purpose To assess the accuracy of a novel navigation system for maxillofacial surgery using human cadavers and a live minipig model. Methods We describe and test an electromagnetic tracking system (OsteoMark Navigation) that uses simple sensors to determine position and orientation of a hand held pencil-like marking device. The device can translate 3-dimensional computed tomographic data intraoperatively to allow the surgeon to localize and draw a proposed osteotomy or the margins of a tumor on the bone. The accuracy of OsteoMark-Navigation in locating and marking osteotomies and screw positions in human cadaver heads was assessed. In Group 1 (n=3, 6 sides), Osteomark-Navigation marked osteotomies and screw positions were compared to virtual treatment plans In Group 2 (n=3, 6 sides), marked osteotomies and screw positions for distraction osteogenesis devices were compared to those carried out using fabricated guide-stents. Three metrics were used to document precision and accuracy. In Group 3 (n=1), the system was tested in a standard operating room environment. Results For Group 1, the mean error between points was 0.7mm (horizontal) and 1.7mm (vertical). When compared to the posterior and inferior mandibular border the mean error was 1.2 and 1.7mm, respectively. For Group 2, the mean discrepancy between points marked by Osteomark-Navigation and the surgical guides was 1.9 mm (range 0-4.1 mm). The system maintained accuracy on a live minipig in a standard operating room environment. Conclusion Based on this research OsteoMark-Navigation is potentially a powerful tool for clinical use in maxillofacial surgery. It has accuracy and precision comparable to existing clinical applications. PMID:25865717
Spinelli, Giuseppe; Mannelli, Giuditta; Zhang, Yi Xin; Lazzeri, Davide; Spacca, Barbara; Genitori, Lorenzo; Raffaini, Mirco; Agostini, Tommaso
2015-10-01
The piezoelectric device allows bone cutting without damaging the surrounding soft tissues. The purpose of this study was to assess the role of this surgical instrument in paediatric craniofacial surgery in terms of safety and surgical outcomes. Thirteen consecutive paediatric patients underwent craniofacial Le Fort osteotomies type III and IV. The saw was used on the right side in seven patients and on the left side in six patients; the piezoelectric instrument was used on the right side in six patients and on the left side in seven patients. Intraoperative blood loss, surgical procedure length, incision precision, postoperative haematoma and swelling, and nerve impairment were evaluated to compare the outcomes of both procedures. A longer surgical procedure was observed in 28% of the patients when using the piezoelectric device (p = 0.032), with an intraoperative blood loss reduction of 18% (p = 0.156). Greater precision in bone cutting was reported, together with a reduction in the requirement to protect and incise adjacent soft tissues during piezoelectric osteotomies. There was a lower incidence of postoperative haematoma and swelling following piezo-osteotomy, and a significant reduction in postoperative nerve impairment (p = 0.002). The ultrasonic surgical device guaranteed a clean bone cut, preserving the integrity of the adjacent soft tissues beneath the bone. Although the time required for a piezoelectric osteotomy was longer, the total operation time remained approximately the same. In conclusion, the device's lack of power appears to be a minor problem compared with the advantages, and an ultrasonic device could be considered a valuable instrument for paediatric craniofacial advancement. Copyright © 2015 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.
Toma, Hugo Futoshi; de Almeida Oliveira Felippe Viana, Thiago; Meireles, Rostanda Mart; Borelli, Isabel Moreira; Blumetti, Francesco Camara; Takimoto, Eduardo Shoiti; Dobashi, Eiffel Tsuyoshi
2014-01-01
Objectives To determine whether the clinical variables and preoperative classification of patients with Legg-Calvé-Perthes disease (LCPD) who undergo Salter osteotomy correlate with the radiographic result at the time of skeletal maturity. Methods In this retrospective cohort study, 47 individuals with LCPD who were treated using Salter osteotomy (1984–2004) were evaluated. The patients were evaluated according to sex, skin color, side affected and age at which osteotomy was performed. The preoperative radiographs were analyzed in accordance with the classifications of Waldenström, Catterall, Laredo and Herring. The radiographs obtained at the time of skeletal maturity were classified using the Stulberg method. Results The mean age at the time of surgical treatment was 82.87 months (6.9 years). The age presented a statistically significant correlation with the Stulberg grades at skeletal maturity (p < 0.001). Patients over the age of 6.12 years tended to present less favorable results. The variables of sex, skin color and side affected did not present any statistically significant correlation with the prognosis (p = 0.425; p = 0.467; p = 0.551, respectively). Only the Laredo classification presented a statistically significant correlation with the final result given by the Stulberg classification (p = 0.001). The other classifications used (Waldenström, Catterall and Herring) did not present any correlation between the time at which surgery was indicated and the postoperative result. Conclusions The age at which the patients underwent surgical treatment and the Laredo classification groups were the only variables that presented significant correlations with the Stulberg classification. PMID:26229850
Comparing fixation used for calcaneal displacement osteotomies: a look at removal rates and cost.
Lucas, Douglas E; Simpson, G Alex; Philbin, Terrence M
2015-02-01
The calcaneal displacement osteotomy is a procedure frequently used by foot and ankle surgeons for hindfoot angular deformity. Traditional techniques use compression screw fixation that can result in prominent hardware. While the results of the procedure are generally good, a common concern is the development of plantar heel pain related to prominent hardware. The primary purpose of this study is to retrospectively compare clinical outcomes of 2 fixation methods for the osteotomy. Secondarily a cost analysis will compare implant costs to hardware removal costs. Records were reviewed for patients who had undergone a calcaneal displacement osteotomy fixated with either lag screw or a locked lateral compression plate (LLCP). Neuropathy, previous ipsilateral calcaneus surgery, heel pad trauma, or incomplete radiographic follow-up were exclusionary. Thirty-two patients (19.4%) required hardware removal from the screw fixation group compared to 1 (1.6%) of the LLCP group, which is significant (P < .05). Time to radiographic healing was not significantly different (P = .87). The screw fixation group required more follow-up visits over a longer period of time (P < .05). Implant cost was remarkably different with screw fixation costing on average $247.12, compared to the LLCP costing $1175.59. Although the LLCP cost was significantly higher, cost savings were identified when the cost of removal and removal rates were included. This study demonstrates that this device provides adequate stabilization for healing in equivalent time to screw fixation. The LLCP required decreased rates of hardware removal with fewer postoperative visits over a shorter period of time. Significant savings were demonstrated in the LLCP group despite the higher implant cost. Therapeutic, Level III, Retrospective Comparative Study. © 2014 The Author(s).
Franzone, Jeanne M; Finkelstein, Mark S; Rogers, Kenneth J; Kruse, Richard W
2017-09-08
Evaluation of the union of osteotomies and fractures in patients with osteogenesis imperfecta (OI) is a critical component of patient care. Studies of the OI patient population have so far used varied criteria to evaluate bony union. The radiographic union score for tibial fractures (RUST), which was subsequently revised to the modified RUST, is an objective standardized method of evaluating fracture healing. We sought to evaluate the reliability of the modified RUST in the setting of the tibias of patients with OI. Tibial radiographs of 30 patients with OI fractures, or osteotomies were scored by 3 observers on 2 separate occasions. Each of the 4 cortices was given a score (1=no callus, 2=callus present, 3=bridging callus, and 4=remodeled, fracture not visible) and the modified RUST is the sum of these scores (range, 4 to 16). The interobserver and intraobserver reliabilities were evaluated using intraclass coefficients (ICC) with 95% confidence intervals. The ICC representing the interobserver reliability for the first iteration of scores was 0.926 (0.864 to 0.962) and for the second series was 0.915 (0.845 to 0.957). The ICCs representing the intraobserver reliability for each of the 3 reviewers for the measurements in series 1 and 2 were 0.860 (0.707 to 0.934), 0.994 (0.986 to 0.997), and 0.974 (0.946 to 0.988). The modified RUST has excellent interobserver and intraobserver reliability in the setting of OI despite challenges related to the poor quality of the bone and its dysplastic nature. The application and routine use of the modified RUST in the OI population will help standardize our evaluation of osteotomy and fracture healing. Level III-retrospective study of nonconsecutive patients.
Chevron osteotomy for the treatment of hallux valgus.
Horne, G; Tanzer, T; Ford, M
1984-03-01
Seventy-six chevron osteotomies with follow-up periods ranging from six months to eight years were reviewed. The majority of patients had pain over the bunion prior to operation, and 27 also presented with second metatarsalgia. After surgery there was a marked decrease of pain in the first metatarsophalangeal joint, and in 18 feet the second metatarsalgia was either eliminated or markedly decreased. Most patients were pleased with the appearance of the feet after surgery, but almost one-third of the women complained of difficulty in wearing high heels. The surgical technique is straightforward, but careful attention to detail is necessary to obtain a consistent and satisfactory result.
Stapleton, John J; Belczyk, Ronald; Zgonis, Thomas; Polyzois, Vasilios D
2009-04-01
Combining an ankle arthrodiastasis with a medial displacement calcaneal osteotomy and a subtalar joint arthrodesis offers surgeons a joint-sparing procedure for young and active patients who have end-stage posterior tibial tendon dysfunction and ankle joint involvement. An isolated subtalar joint arthrodesis or triple arthrodesis combined with an ankle arthrodiastasis is an option that can be used in certain case scenarios. Delaying the need for a joint destructive procedure through an ankle arthrodiastasis, however, may have a great impact in the near future, as advancements are underway to improve the use of ankle endoprosthesis.
Wang, Hsien-Chung; Lin, Gau-Tyan
2004-05-01
Gorham disease is a so-called massive idiopathic osteolysis or vanishing bone disorder. Massive osteolysis remains an enigmatic condition that involves various skeletal locations and is caused by endothelial proliferation. The diagnosis is difficult and is established via the association of clinical, radiologic and histologic pictures. Treatment modalities yield variable results. We report a case of vanishing bone in the elbow joint and carpal bones following trauma. This 13-year-old boy complained of severe restricted motion and deformity of the right elbow. We managed the problem using arthroplasty with close-wedge osteotomy on the lateral condyle of the humerus.
Tallón-López, J; Domínguez-Amador, J J; Andrés-García, J A
2014-01-01
Varus deformity of the proximal humerus in children is a little known pathology due to its low incidence of presentation. Progress has been made in recent years in understanding the possible etiology and pathophysiological causes. Radiological criteria for diagnosis and functional impairment that occurs have also been defined. However, there are few reports in the literature about the surgical treatment of this deformity in children. In this paper we present a case of surgical treatment of this deformity by corrective osteotomy fixed with precontoured external maleolar plate osteosynthesis. Copyright © 2013 SECOT. Published by Elsevier Espana. All rights reserved.
Effects of a Short Drilling Implant Protocol on Osteotomy Site Temperature and Drill Torque.
Mihali, Sorin G; Canjau, Silvana; Cernescu, Anghel; Bortun, Cristina M; Wang, Hom-Lay; Bratu, Emanuel
2018-02-01
To establish a protocol for reducing the drilling sequence during implant site preparation based on temperature and insertion torque. The traditional conventional drilling sequence (used several drills with 0.6-mm increment each time) was compared with the proposed short drilling protocol (only used 2 drills: initial and final drill). One hundred drilling osteotomies were performed in bovine and porcine bones. Sets of 2 osteotomy sites were created in 5 bone densities using 2 types of drilling protocols. Thermographic pictures were captured throughout all drilling procedures and analyzed using ThermaCAM Researcher Professional 2.10. Torque values were determined during drilling by measuring electrical input and drill speed. There were statistically significant differences in bone temperature between the conventional and short drilling protocols during implant site preparation (analysis of variance P = 0.0008). However, there were no significant differences between the 2 types of drilling protocols for both implant diameters. Implant site preparation time was significantly reduced when using the short drilling protocol compared with the conventional drilling protocol (P < 0.001). Within the limitations of the study, the short drilling protocol proposed herein may represent a safe approach for implant site preparation.
Warren, P J; Thompson, P; Fletcher, M D A
2002-12-01
The Wagner SL uncemented revision stem has been utilised successfully for revision hip surgery where marked loss of proximal bone stock co-exists or where there is a periprosthetic fracture. Implanted via the transfemoral approach, one significant difficulty appears to be a tendency for implant subsidence, which in some cases has been troublesome enough to necessitate early revision (usually to a larger prosthesis). A change in our operative practice allowed us to review the effects of using either wire cerclages or 2.0 mm Dall-Miles cables for prophylactic wiring of the distal femur. Seventeen Wagner SL stems, inserted via the transfemoral approach, were studied in 16 patients. We found those patients prophylactically wired with Dall-Miles cables demonstrated no subsidence in comparison with those in whom heavy wire cerclage had been utilised (mean subsidence 6 mm; p=0.001). In addition, we found that closure of the proximal osteotomy with wires conferred a more reliable rate of union in comparison with those closed with heavy sutures. We recommend the use of Dall-Miles cables for distal cerclage and osteotomy closure for the Wagner prosthesis.
Achievability of 3D planned bimaxillary osteotomies: maxilla-first versus mandible-first surgery.
Liebregts, Jeroen; Baan, Frank; de Koning, Martien; Ongkosuwito, Edwin; Bergé, Stefaan; Maal, Thomas; Xi, Tong
2017-08-24
The present study was aimed to investigate the effects of sequencing a two-component surgical procedure for correcting malpositioned jaws (bimaxillary osteotomies); specifically, surgical repositioning of the upper jaw-maxilla, and the lower jaw-mandible. Within a population of 116 patients requiring bimaxillary osteotomies, the investigators analyzed whether there were statistically significant differences in postoperative outcome as measured by concordance with a preoperative digital 3D virtual treatment plan. In one group of subjects (n = 58), the maxillary surgical procedure preceded the mandibular surgery. In the second group (n = 58), the mandibular procedure preceded the maxillary surgical procedure. A semi-automated analysis tool (OrthoGnathicAnalyser) was applied to assess the concordance of the postoperative maxillary and mandibular position with the cone beam CT-based 3D virtual treatment planning in an effort to minimize observer variability. The results demonstrated that in most instances, the maxilla-first surgical approach yielded closer concordance with the 3D virtual treatment plan than a mandibular-first procedure. In selected circumstances, such as a planned counterclockwise rotation of both jaws, the mandible-first sequence resulted in more predictable displacements of the jaws.
2014-01-01
Background This study aimed to evaluate the accuracy of surgical outcomes in free iliac crest mandibular reconstructions that were carried out with virtual surgical plans and rapid prototyping templates. Methods This study evaluated eight patients who underwent mandibular osteotomy and reconstruction with free iliac crest grafts using virtual surgical planning and designed guiding templates. Operations were performed using the prefabricated guiding templates. Postoperative three-dimensional computer models were overlaid and compared with the preoperatively designed models in the same coordinate system. Results Compared to the virtual osteotomy, the mean error of distance of the actual mandibular osteotomy was 2.06 ± 0.86 mm. When compared to the virtual harvested grafts, the mean error volume of the actual harvested grafts was 1412.22 ± 439.24 mm3 (9.12% ± 2.84%). The mean error between the volume of the actual harvested grafts and the shaped grafts was 2094.35 ± 929.12 mm3 (12.40% ± 5.50%). Conclusions The use of computer-aided rapid prototyping templates for virtual surgical planning appears to positively influence the accuracy of mandibular reconstruction. PMID:24957053
Augello, Marcello; Deibel, Waldemar; Nuss, Katja; Cattin, Philippe; Jürgens, Philipp
2018-04-13
Most industrial laser applications utilize computer and robot assistance, for guidance, safety, repeatability, and precision. In contrast, medical applications using laser systems are mostly conducted manually. The advantages can be effective only when the system is coupled to a robotic guidance, as operating by hand does not reach the required accuracy. We currently developed the first laser osteotome which offers preoperative planning based on CT data, robot guidance, and a precise execution of the laser cuts. In an animal trial, our system was used to create a grid pattern of the same depth on the inner layer of parietal bone in 12 adult sheep. The same bone cuts were done with piezoelectric osteotome on the contralateral side. The micro-CT and histological analysis showed more new mineralized bone in the laser group compared to the piezoelectric group. As well, a cutting pattern with especially a constant osteotomy depth in the laser group was demonstrated. The here presented autonomous osteotomy tool shows not only an advantage in early bone healing stage but additionally sharp bone cuts with a very high accuracy and freely selectable design cuts.
Berger, Moritz; Nova, Igor; Kallus, Sebastian; Ristow, Oliver; Eisenmann, Urs; Dickhaus, Hartmut; Engel, Michael; Freudlsperger, Christian; Hoffmann, Jürgen; Seeberger, Robin
2018-05-01
Reproduction of the exact preoperative proximal-mandible position after osteotomy in orthognathic surgery is difficult to achieve. This clinical pilot study evaluated an electromagnetic (EM) navigation system for condylar positioning after high-oblique sagittal split osteotomy (HSSO). After HSSO as part of 2-jaw surgery, the position of 10 condyles was intraoperatively guided by an EM navigation system. As controls, 10 proximal segments were positioned by standard manual replacement. Accuracy was measured by pre- and postoperative cone beam computed tomography imaging. Overall, EM condyle repositioning was equally accurate compared with manual repositioning (P > .05). Subdivided into 3 axes, significant differences could be identified (P < .05). Nevertheless, no significantly and clinically relevant dislocations of the proximal segment of either the EM or the manual repositioning method could be shown (P > .05). This pilot study introduces a guided method for proximal segment positioning after HSSO by applying the intraoperative EM system. The data demonstrate the high accuracy of EM navigation, although manual replacement of the condyles could not be surpassed. However, EM navigation can avoid clinically hidden, severe malpositioning of the condyles. Copyright © 2017 Elsevier Inc. All rights reserved.
Liu, Jin-Song; Li, Zhi-Yao
2013-09-01
To study the results of closing-wedge high tibial osteotomy and arthroscopy for the treatment of medial compartment osteoarthritis of the knee. From October 2005 to June 2007, 25 patients met with our inclusion criteria. All the patients with medial compartment knee osteoarthritis were treated with arthroscopy and closing-wedge high tibial osteotomy. There were 11 males and 14 females,with a mean age of 53 years old. The pre-operative HSS knee score was 67.6 +/- 2.8, FTA was (185.54 +/- 1.11) degrees, and aLPTA was (96.54 +/- 0.52) degrees in average. The patients were followed up and evaluated according to HSS knee score. The efficacy of the osteotomy was evaluated by FTA and aLPTA. All surgeries were successful without serious complication. All the patients were followed up, and the duration ranged from 5 to 7 years. The HSS was 85.5 +/- 3.7 at the 1st year and 80.3 +/- 5.4 at the latest follow-up. There was significant difference between every two scores of before operation and the two after operation (t = -33.135, P = 0.000; t = -13.215, P = 0.000). The FTA was (173.65 +/- 0.92) degrees at the 1st year and (174.34 +/- 0.53) degrees at the latest follow-up. There was significant difference between every two angles of before operation and after operation (t = 28.739, P = 0.000; t = 2.331, P = 0.048). The aLPTA was (87.32 +/- 0.33) degrees at the 1st year and (87.67 +/- 2.82) degrees at the latest follow-up. There was significant difference between every two angles of before operation and after operation (t = 37.264, P = 0.000; t = 2.469, P = 0.039). Indication is important and good surgical technique is critical for good clinical outcome. A detailed plan before operation is essential for the operation. Arthroscopy is helpful for treating the intra-articular pathology. The osteoarthritis is still in progress but in a slow mode. The combined method of arthroscopy and closing-wedge high tibial osteotomy is a reliable way for medial compartment osteoarthritis of the knee.
Jung, Hong-Geun; Kim, Tae-Hoon; Park, Jong-Tae; Shin, Min-Ho; Lee, Sang-Hun
2014-04-01
Scarring on the dorsal first web space after lateral soft tissue release can be a major contributor to patient dissatisfaction following hallux valgus surgery. We hypothesized that performing distal soft tissue procedure (DSTP), proximal reverse chevron metatarsal osteotomy (PCMO), and Akin osteotomy through a single medial incision would provide better clinical and radiographic results with improved patient satisfaction compared with bunion corrections performed through 2 incisions. The study included 117 feet (of 98 patients) with moderate to severe hallux valgus. Clinically, the preoperative and final follow-up visual analog scale (VAS) pain scores, the preoperative and final follow-up American Orthopaedic Foot & Ankle Society (AOFAS) hallux metatarsophalangeal (MTP)-interphalangeal (IP) scores, first MTP joint range of motion (ROM), and patient satisfaction after the surgery were evaluated. Radiographically, the hallux valgus angle (HVA), intermetatarsal angle (IMA), hallux valgus interphalangeal angle (HIA), medial sesamoid position (MSP), and first to fifth metatarsal width (1-5MTW) were analyzed before and after surgery. The mean AOFAS hallux score improved from 56.3 preoperatively to 90.6 at the final follow-up, and the mean VAS pain score decreased from 6.8 preoperatively to 1.5 at the final follow-up (P < .001). Ninety-five percent of the patients were satisfied with the surgery. Radiographically, the mean HVA decreased from 36.1 degrees (range, 16.0 to 44.0 degrees) preoperatively to 5.4 degrees (range, -12.4 to 29.7 degrees) at the final follow-up (P < .001), and the mean IMA decreased from 19.0 degrees (range, 9.0 to 28.0 degrees) preoperatively to 4.5 degrees (range, -5.0 to 14.2 degrees) at the final follow-up (P < .001). The mean 1-5MTW also decreased by 16% (16 mm) from 97.3 mm (range, 85.0 to 110.0 mm) preoperatively to 81.3 mm (range, 70.0 to 95.0 mm) at the final follow-up (P < .001). We achieved very favorable clinical and radiographic outcomes with minimal complications in patients with moderate to severe hallux valgus, by treating hallux valgus using DSTP, PCMO, and Akin osteotomy through a single medial incision. The single medial incision scar improved the cosmetic results by avoiding the formation of a disfiguring dorsal first web space scar. Level IV, retrospective case series.
Hamrick, Mark W; Arounleut, Phonepasong; Kellum, Ethan; Cain, Matthew; Immel, David; Liang, Li-Fang
2010-09-01
Myostatin (GDF-8) is known as a potent inhibitor of muscle growth and development, and myostatin is also expressed early in the fracture healing process. The purpose of this study was to test the hypothesis that a new myostatin inhibitor, a recombinant myostatin propeptide, can enhance the repair and regeneration of both muscle and bone in cases of deep penetrant injury. We used a fibula osteotomy model with associated damage to lateral compartment muscles (fibularis longus and brevis) in mice to test the hypothesis that blocking active myostatin with systemic injections of a recombinant myostatin propeptide would improve muscle and bone repair. Mice were assigned to two treatment groups after undergoing a fibula osteotomy: those receiving either vehicle (saline) or recombinant myostatin propeptide (20 mg/kg). Mice received one injection on the day of surgery, another injection 5 days after surgery, and a third injection 10 days after surgery. Mice were killed 15 days after the osteotomy procedure. Bone repair was assessed using microcomputed tomography (micro-CT) and histologic evaluation of the fracture callus. Muscle healing was assessed using Masson trichrome staining of the injury site, and image analysis was used to quantify the degree of fibrosis and muscle regeneration. Three propeptide injections over a period of 15 days increased body mass by 7% and increased muscle mass by almost 20% (p < 0.001). Micro-CT analysis of the osteotomy site shows that by 15 days postosteotomy, bony callus tissue was observed bridging the osteotomy gap in 80% of the propeptide-treated mice but only 40% of the control (vehicle)-treated mice (p < 0.01). Micro-CT quantification shows that bone volume of the fracture callus was increased by ∼ 30% (p < 0.05) with propeptide treatment, and the increase in bone volume was accompanied by a significant increase in cartilage area (p = 0.01). Propeptide treatment significantly decreased the fraction of fibrous tissue in the wound site and increased the fraction of muscle relative to fibrous tissue by 20% (p < 0.01). Blocking myostatin signaling in the injured limb improves fracture healing and enhances muscle regeneration. These data suggest that myostatin inhibitors may be effective for improving wound repair in cases of orthopaedic trauma and extremity injury.
Yamanaka, Yoshiaki; Nakamura, Toshiyasu; Sato, Kazuki; Toyama, Yoshiaki
2014-11-01
Ulnar shortening osteotomy often is indicated for treatment of injuries to the triangular fibrocartilage complex (TFCC). However, the effect of ulnar shortening osteotomy on the changes in shape of the TFCC is unclear. In our study, quantitative evaluations were performed using MRI to clarify the effect of ulnar shortening on triangular fibrocartilage (TFC) thickness attributable to disc regeneration of the TFC and TFC angle attributable to the suspension effect of ulnar shortening on the TFC. The purposes of this study were (1) to compare preoperative and postoperative TFC thickness and TFC angle on MR images to quantitatively evaluate the effect of ulnar shortening osteotomy on disc regeneration and the suspension effect on the TFC; and (2) to assess whether changes in TFC thickness and TFC angle correlated with the Mayo wrist score. Between 1995 and 2008, 256 patients underwent ulnar shortening osteotomy for TFCC injuries. The minimum followup was 24 months (mean, 51 months; range, 24-210 months). A total of 79 patients (31%) with complete followup including preoperative and postoperative MR images and the Mayo wrist score was included in this retrospective study. Evaluation of the postoperative MR images and the Mayo wrist score were performed at the final followup. The remaining 177 patients did not undergo postoperative MRI, or they had a previous fracture, large tears of the disc proper, or were lost to followup. Two orthopaedists, one of whom performed the surgeries, measured the TFC thickness and the TFC angle on coronal MR images before and after surgery for each patient. Correlations of the percent change in the TFC thickness and the magnitude of TFC angle change with age, sex, postoperative MR images, extent of ulnar shortening, preoperative ulnar variance, and postoperative Mayo wrist score were assessed. Stepwise regression analysis showed a correlation between the percent change in TFC thickness and preoperative ulnar variance (R2=0.21; β=-0.33; 95% CI, -0.11 to 0.01; p=0.01) and between the magnitude of change in the TFC angle and the extent of ulnar shortening (R2=0.18; β=-0.29; 95% CI, -5.8 to 0.29; p=0.03). The Mayo wrist score was not correlated with the percent change in TFC thickness or the magnitude of change in the TFC angle. These results suggest that, in patients with TFCC injury with a smaller preoperative ulnar variance, a high residual potential for regeneration in the disc proper was seen after ulnar shortening osteotomy, and correlated with the extent of ulnar shortening and the suspension effect on TFC. However, there was no correlation between disc regeneration or the suspension effect on TFC and the Mayo wrist score. Level IV, therapeutic study. See the Instructions for Authors for a complete description of levels of evidence.
Lansdaal, Joris Radboud; Mouton, Tanguy; Wascher, Daniel Charles; Demey, Guillaume; Lustig, Sebastien; Neyret, Philippe; Servien, Elvire
2017-12-01
The need for a period of non-weight bearing after medial opening wedge high tibial osteotomy remains controversial. It is hypothesized that immediate weight bearing after medial opening wedge high tibial osteotomy would have no difference in functional scores at one year compared to delayed weight bearing. Fifty patients, median age 54 years (range 40-65), with medial compartment osteoarthritis, underwent a medial opening wedge high tibial osteotomy utilizing a locking plate without bone grafting. Patients were randomized into an Immediate or a Delayed (2 months) weight bearing group. All patients were assessed at one-year follow-up and the two groups compared. The primary outcome measure was the IKS score. Secondary outcome measures included the IKDC score, the VAS pain score and rate of complications. The functional scores significantly improved in both groups. The IKS score increased from 142 ± 31 to 171 ± 26 in the Immediate group (p < 0.001) and from 148 ± 22 to 178 ± 23 in the Delayed group (p < 0.001). The IKDC score increased from 49 ± 17 pre-operatively to 68 ± 14 one-year post-operatively in the Immediate group (p < 0.0001) and from 44 ± 16 to 69 ± 19 in the Delayed group (p < 0.001). The average VAS for pain 2 months after surgery was 3 ± 3 in the Immediate group and 3 ± 2 in the Delayed (n.s.). There was no significant difference between the two groups in any of the outcome measures. The mean mechanical femorotibial angle changed from 6° of varus (0°-15° of varus, SD = 3°) to 4° of valgus (5°-11° of valgus, SD = 3°) in the Immediate group and from 5° of varus (0°-10° of varus, SD = 3°) to 3° of valgus (2° of varus to 8° of valgus, SD = 3°) in the Delayed group. No difference was seen between groups, and no loss of correction was observed in any patient. Two cases of non-union occurred, one in each group. One infection and one deep vein thrombosis occurred in the Immediate group. Immediate weight bearing after medial opening wedge high tibial osteotomy had no effect on functional scores at 1 year follow-up and did not significantly increase the complication rate. Immediate weight bearing after medial opening wedge high tibial osteotomy appears to be safe and can allow some patients a quicker return to activities of daily living and a decreased convalescence period. II.
The chevron osteotomy and avascular necrosis.
Rothwell, Matthew; Pickard, James
2013-03-01
Avascular necrosis (AVN) of the first metatarsal head following the chevron procedure for hallux valgus correction, has been reported widely in the literature; however, in practice it is rarely encountered and may be an over reported myth associated with the chevron technique. Although an infrequent complication, the consequences for those who develop post-operative AVN can be severe. This paper presents an overview of the pathogenesis and classification of AVN. It reviews the vascular anatomy of the first metatarsal with reference to the surgical technique of chevron osteotomy with lateral release. Imaging techniques are described and the management of AVN and revision surgery are also discussed. Copyright © 2012 Elsevier Ltd. All rights reserved.
Cohen, Bruce E; Nicholson, Christopher W
2007-05-01
The bunionette, or tailor's bunion, is a lateral prominence of the fifth metatarsal head. Most commonly, bunionettes are the result of a widened 4-5 intermetatarsal angle with associated varus of the metatarsophalangeal joint. When symptomatic, these deformities often respond to nonsurgical treatment methods, such as wider shoes and padding techniques. When these methods are unsuccessful, surgical treatment is based on preoperative radiographs and associated lesions, such as hyperkeratoses. In rare situations, a simple lateral eminence resection is appropriate; however, the risk of recurrence or overresection is high with this technique. Patients with a lateral bow to the fifth metatarsal are treated with a distal chevron-type osteotomy. A widened 4-5 intermetatarsal angle often requires a diaphyseal osteotomy for correction.
Geminiani, Alessandro; Papadimitriou, Dimitrios E V; Ercoli, Carlo
2011-11-01
Several techniques have been proposed to manage patients with insufficient bone height for implant placement in the posterior maxilla. The lateral approach to sinus elevation is a successful procedure, with percentages of success close to 100%. Unfortunately, a frequent complication encountered during sinus elevation procedure is perforation of the Schneiderian membrane. In this clinical report, the authors present the application of a diamond coated sonic tip and an air-driven sonic instrument, commonly used in prosthodontics for the preparation of the lateral window osteotomy during sinus augmentation procedures. Copyright © 2011 The Editorial Council of the Journal of Prosthetic Dentistry. Published by Mosby, Inc. All rights reserved.
Double osteotomy of mandibula in the treatment of carotid body tumors with skull base extension.
Prouse, Giorgio; Mazzaccaro, Daniela; Settembrini, Fernanda; Carmo, Michele; Biglioli, Federico; Settembrini, Piergiorgio G
2013-08-01
We report two patients with a carotid body paraganglioma that extended to the skull base, a position that is surgically inaccessible by means of a traditional lateral cervical approach. In both patients we were able to remove the lesion by performing a double mandibular osteotomy. Both patients underwent preoperative embolization to reduce the mass. In our experience, this approach has allowed a safe radical excision of exceptionally high lesions with only minor permanent nerve damage. In our opinion this advantage definitely outweighs the consequences of the increased invasiveness of this technique. Copyright © 2013 Society for Vascular Surgery. Published by Mosby, Inc. All rights reserved.
Moon, Edward S; Howlett, John; Wiater, Brett P; Trumble, Thomas E
2011-04-01
Plastic deformation of the forearm is a rare injury in young adults that occurs when a slow bending or rotational force is applied to the arm, most commonly in the setting of an industrial workplace accident. There are currently no guidelines for treatment of the residual forearm deformity that often results in limitations of forearm supination and pronation. We present 2 cases demonstrating that deformity correction with single cortex, double-level osteotomies combined with rigid plate fixation and early range of motion exercise that results in good functional outcomes. Copyright © 2011 American Society for Surgery of the Hand. Published by Elsevier Inc. All rights reserved.
Muto, Toshitaka
2012-05-01
Most rigid fixation techniques after sagittal split ramus osteotomies of the mandible involve the transbuccal approach. A skin incision in the cheek carries with it possible undesirable sequelae, such as noticeable scarring. The aim of this study was to investigate whether there is scarring in the face after this technique. For screw insertion, a 5-mm stab incision was performed on 40 Japanese patients (20 men and 20 women) with class III occlusion. After surgery, gross examination (via the naked eyes) of the skin incision was performed monthly for 1 year by the same oral surgeon. In all cases, the skin incision had disappeared by 1 year after the surgery.
Early results using a biodegradable magnesium screw for modified chevron osteotomies.
Plaass, Christian; Ettinger, Sarah; Sonnow, Lena; Koenneker, Soeren; Noll, Yvonne; Weizbauer, Andreas; Reifenrath, Janin; Claassen, Leif; Daniilidis, Kiriakos; Stukenborg-Colsman, Christina; Windhagen, Henning
2016-12-01
This is the first larger study analyzing the use of magnesium-based screws for fixation of modified Chevron osteotomies in hallux valgus surgery. Forty-four patients (45 feet) were included in this prospective study. A modified Chevron osteotomy was performed on every patient and a magnesium screw used for fixation. The mean clinical follow up was 21.4 weeks. The mean age of the patients was 45.5 years. Forty patients could be provided with the implant, in four patients the surgeon decided to change to a standard metallic implant. The AOFAS, FAAM and pain NRS-scale improved markedly. The hallux valgus angle, intermetatarsal angle and sesamoid position improved significantly. Seven patients showed dorsal subluxation, rotation or medial shifting of the metatarsal heads within the first 3 months. One of these patients was revised, in all others the findings were considered clinically not significant or the patients refused revision. This study shows the feasibility of using magnesium screws in hallux valgus-surgery. Surgeons starting with the use of these implants should be aware of the proper handling of these implants and should know about corrosion effects during healing and its radiographic appearance. © 2016 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 34:2207-2214, 2016. © 2016 Orthopaedic Research Society. Published by Wiley Periodicals, Inc.
Hochscheidt, Celso João; Shimizu, Roberto Hideo; Andrighetto, Augusto Ricardo; Pierezan, Rodrigo; Thomé, Geninho; Salatti, Rafael
2017-10-01
This study evaluated cutting efficiency (CE) and linear wear of dental implant drills after 450 standardized osteotomies on bovine ribs. Diamond-like carbon-coated steel drills (SG), acid-treated steel drills (EG), and ceramic drills (ZG) were divided into 6 subgroups according to the number of uses. A robot-controlled program performed systematic instrumentation, timing, axial loading, and managed feed rate. CE was recorded in a polyurethane resin blank and end wear (VBBmax) was analyzed under stereo microscopy. After osteotomies in beef ribs, CE for the Ø2.0-mm drill decreased 10.2% in SG and 10.9% in ZG; for the Ø3.0-mm drill, CE decreased 30.6% in SG, 8.5% in ZG, and improved in EG. The greatest wear occurred in Ø2.0-mm drills; ZG drills (Ø3.0 mm) exhibited only edge frittering, as confirmed on scanning electron microscopy. After 50 exposures to mechanical loads, steel and ceramic drills lost CE. Whereas cutting and thermal performance improved in experimental drills, the Ø2.0-mm drill exhibited the most signs of wear proportional to use. These findings suggest that, with the methodology employed, the life of these drills exceeds 50 osteotomies.
Mei-Dan, O; Jewell, D; Garabekyan, T; Brockwell, J; Young, D A; McBryde, C W; O'Hara, J N
2017-06-01
The aim of this study was to evaluate the long-term clinical and radiographic outcomes of the Birmingham Interlocking Pelvic Osteotomy (BIPO). In this prospective study, we report the mid- to long-term clinical outcomes of the first 100 consecutive patients (116 hips; 88 in women, 28 in men) undergoing BIPO, reflecting the surgeon's learning curve. Failure was defined as conversion to hip arthroplasty. The mean age at operation was 31 years (7 to 57). Three patients (three hips) were lost to follow-up. Survivorship was 76% at ten years and 57% at a mean of 17 years. Younger patients (< 20 years) had the best survivorship (20 hips at risk; 90% at 17 years; 95% confidence interval 65 to 97). Post-operative complications occurred after 12 operations (10.4%) over the duration of the study. Increasing patient age and hip arthritis grade were primary determinants of surgical failure. BIPO provides good to excellent survivorship in appropriately selected patients, with a relatively low rate of complications. Our results are comparable with other established methods of periacetabular osteotomy (PAO), such as the Bernese PAO, even during the surgeon's initial learning curve. Cite this article: Bone Joint J 2017;99-B:724-31. ©2017 The British Editorial Society of Bone & Joint Surgery.
Surgical treatment of high-standing greater trochanter.
Takata, K; Maniwa, S; Ochi, M
1999-01-01
Eleven patients with high-standing greater trochanter (13 joints) aged 13-36 years underwent surgery. Distal transfer of the greater trochanter (group T) was performed in 4 patients (5 joints) and lateral displacement osteotomy (group L) in 7 (8 joints). The average follow-up duration was 13.4 years in group T and 5.9 years in group L. Clinical results were evaluated by the hip score according to Merle d'Aubigne. The mean hip score in group T was 13.4 points before operation and 15.4 points after operation, and in group L, 12.8 and 17.4 points, respectively. The postoperative clinical results of group L were significantly better than those of group T (P = 0.0494). In radiological evaluation, although the articulo-trochanteric distance (ATD) increased in both groups in group L it improved remarkably from 9.8 to 24.3, indicating a large descending distance of the greater trochanter. The lever arm ratio (LAR) did not change significantly in group T, but it decreased from 1.97 to 1.60 in group L (P = 0.004). This means that the lever arm of the abductors can certainly be extended by lateral displacement osteotomy. Lateral displacement osteotomy is the most effective procedure for high-standing greater trochanter.
Growth disturbance in Legg-Calvé-Perthes disease and the consequences of surgical treatment.
Leitch, J M; Paterson, D C; Foster, B K
1991-01-01
Seventy-two patients with Legg-Calvé-Perthes disease were studied to assess the interference with proximal femoral growth as a result of the disease itself and of surgical treatment. Twenty-five patients were treated nonoperatively, 20 were treated by femoral varus derotation osteotomy, and 27 by innominate osteotomy. All patients were studied clinically for evidence of abductor weakness and leg-length discrepancy. They were also studied roentgenographically for evidence of femoral head deformity and trochanteric overgrowth. The overall results showed a 6% incidence of leg-length discrepancy greater than 2 cm after both operative and nonoperative treatment. The articulo-trochanteric distance (ATD) was less than +5 mm in 23% of patients, of which 43% had a positive Trendelenburg sign. A significantly lower mean ATD was found in patients treated by femoral varus osteotomy, which should be avoided in patients over eight years of age. The study also demonstrated a strong association between coxa magna and growth disturbance of the proximal femoral physis manifesting itself as either a leg-length discrepancy or as a low ATD. The significant effects of growth disturbance after treatment must be considered, as well as the sphericity of the healed femoral head, in the final assessment in Legg-Calvé-Perthes disease.
Ma, Li; Mattheos, Nikos; Sun, Yan; Liu, Xi Ling; Yip Chui, Ying; Lang, Niklaus Peter
2015-08-01
The aim of the present study was to evaluate and compare the wound-healing process following osteotomies performed with either conventional rotary burs or piezoelectric surgery in a rabbit model. Two types of osteotomy window defects of the nasal cavities were prepared on the nasal bone of 16 adult New Zealand white rabbits with either a conventional rotary bur or piezo surgery. The defects were covered with a resorbable membrane. Four animals were killed at 1, 2, 3, and 5 weeks after the surgical procedure, respectively. Histological and morphometric evaluations were performed to assess the volumetric density of various tissue components: the blood clot, vascularized structures, provisional matrix, osteoid, mineralized bone, bone debris, residual tissue, and old bone. Significantly more bone debris was found at 1 week in the conventionally-prepared defects compared to the piezo surgically-prepared defects. At 2 and 3 weeks, a newly-formed hard tissue bridge, mainly composed of woven bone, was seen; however, no statistically-significant differences were observed. At 5 weeks, the defects were completely filled with newly-formed bone. The defects prepared by piezo surgery showed a significantly decreased proportion of bone debris at 1 week, compared to conventional rotary bur defect. © 2014 Wiley Publishing Asia Pty Ltd.
Uygur, Esat; Özkan, Namık Kemal; Akan, Kaya; Çift, Hakan
2016-01-01
The aim of this prospective randomized controlled single-blind study was to compare the results of Chevron and Lindgren-Turan osteotomy techniques for treatment of moderate hallux valgus. A total of 66 female patients (34 in Chevron group, 32 Lindgren-Turan group) were recruited in this study and followed up for an average of 26.08 months. Operative procedures were performed by 2 surgeons, and patients were evaluated by an another researcher who was blinded to the surgical technique. The groups were compared for their radiological and clinical results. Both techniques was clinically and radiologically effective (p<0.01). However, no significant differences were found between the 2 groups regarding American Orthopaedic Foot and Ankle Society's clinical rating system, Painful Foot Evaluation scale of Maryland University scores, or radiologic evaluation (p>0.05). Compared to the Chevron group, the Lindgren-Turan group was found to have shorter surgical duration (p<0.05) and significantly more shortening at the first metatarsal (p<0.05). In moderate hallux valgus deformity, both the Chevron and Lindgren-Turan osteotomy techniques are clinically and radiologically safe, effective, and reliable alternatives. No superiority was detected in either technique. Although shortening at the first metatarsal in the Lindgren-Turan group was radiologically significant, the results were clinically tolerable.
Ankle joint pressure changes in high tibial and distal femoral osteotomies: a cadaver study.
Krause, F; Barandun, A; Klammer, G; Zderic, I; Gueorguiev, B; Schmid, T
2017-01-01
To assess the effect of high tibial and distal femoral osteotomies (HTO and DFO) on the pressure characteristics of the ankle joint. Varus and valgus malalignment of the knee was simulated in human cadaver full-length legs. Testing included four measurements: baseline malalignment, 5° and 10° re-aligning osteotomy, and control baseline malalignment. For HTO, testing was rerun with the subtalar joint fixed. In order to represent half body weight, a 300 N force was applied onto the femoral head. Intra-articular sensors captured ankle pressure. In the absence of restriction of subtalar movement, insignificant migration of the centre of force and changes of maximal pressure were seen at the ankle joint. With restricted subtalar motion, more significant lateralisation of the centre of force were seen with the subtalar joint in varus than in valgus position. Changes in maximum pressure were again not significant. The re-alignment of coronal plane knee deformities by HTO and DFO altered ankle pressure characteristics. When the subtalar joint was fixed in the varus position, migration of centre of force after HTO was more significant than when the subtalar joint was fixed in valgus. Cite this article: Bone Joint J 2017;99-B:59-65. ©2017 The British Editorial Society of Bone & Joint Surgery.
Nogueira, Renato Luiz Maia; Osterne, Rafael Lima Verde; Abreu, Ricardo Teixeira; Araújo, Phelype Maia
2017-07-01
An alternative technique to reconstruct atrophic alveolar vertical bone after implant placement is presented. The technique consists of distraction osteogenesis or direct surgical repositioning of an implant-and-bone block segment after segmental osteotomies that can be used in esthetic or unesthetic cases. Initially, casts indicating the implant position are obtained and the future ideal prosthetic position is determined to guide the model surgery. After the model surgery, a new provisional prosthesis is fabricated, and an occlusal splint, which is used as a surgical guide and a device for distraction osteogenesis, is custom fabricated. Then, the surgery is performed. For mobilization of the implant-and-bone block segment, 2 vertical osteotomies are performed and then joined by a horizontal osteotomy. The implant-and-bone block segment is moved to the planned position. If a small movement is planned, then the implant-and-bone segment is stabilized; for larger movements, the implant-and-bone segment can be gradually moved to the final position by distraction osteogenesis. This technique has good predictability of the final position of the implant-and-bone segment and relatively fast esthetic rehabilitation. It can be considered for dental implants in regions of vertical bone atrophy. Copyright © 2017 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.
Being overweight has limited effect on SCARF osteotomy outcome for hallux valgus correction.
Milczarek, Marcin A; Milczarek, Julia J; Tomasik, Bartłomiej; Łaganowski, Przemysław; Nowak, Krzysztof; Domżalski, Marcin
2017-04-01
The purpose of this study was to investigate the association between body mass index (BMI) and the results of SCARF osteotomy of the first metatarsal for hallux valgus (HV) correction, as the literature on this is scant. This prospective study was carried out between 2011 and 2015. One hundred and thirty-three patients diagnosed with moderate to severe HV underwent a SCARF corrective osteotomy. We divided the patients into two groups according to their BMI: normal and overweight. Postoperative follow-up was two years. All patients were examined twice by two medical doctors simultaneously: pre-operatively and post-operatively at two years' follow-up. Data collected included biometrical records, X-rays [HV angle (HVA), intermetatarsal angle (IMA), American Orthopaedic Foot and Ankle Society Hallux Metatarsophalangeal Index (AOFAS-HMI) and visual analogue scale (VAS) for pain and satisfaction]. There was a significant difference between patient age (p = 0.001), age at onset (p < 0.001) and AOFAS-HMI (p = 0.035) at follow-up. Other parameters were similar in both groups. Regardless of BMI, the radiological outcome was comparable. Despite a significant difference in AOFAS-HMI results, pain and satisfaction level were similar. The authors agreed that high BMI has protective role in the prevalence of HV.
Piezosurgery for osteotomies in orbital surgery: Our experience and review of the literature
Iacoangeli, Maurizio; Neri, Piergiorgio; Balercia, Paolo; Lupi, Ettore; Di Rienzo, Alessandro; Nocchi, Niccolò; Alvaro, Lorenzo; Scerrati, Massimo
2012-01-01
INTRODUCTION Piezoelectric bone surgery, simply known as Piezosurgery®, is a new promising technique for bone cutting based on ultrasonic microvibrations that allows to perform precise and thin osteotomies with soft tissue sparing. PRESENTATION OF CASE A 45-years-old woman presenting with progressive left ocular pain, diplopia on the lateral left gaze, and visible exophthalmos was admitted to our department. CT scan and MRI images documented a left supero-lateral orbital lesion. A left lateral orbitotomy using the piezoelectric scalpel was performed. The tumour (lacrimal gland lymphoma) was completely removed with no injuries to the orbital structures and with a perfect realignment of the bone stumps. DISCUSSION High powered pneumatic osteotome are commonly used to perform craniotomies. Large bone cutting groove and high temperatures developing at the contact site could produce an uneasy bone healing. The use of a piezoelectric scalpel allows to realize precise and thin osteotomies, facilitating craniotomy's borders ossification and avoiding injuries to non-osseous structures. CONCLUSION Widely used in Oral and Maxillofacial Surgery, Piezosurgery® can also be useful in neurosurgical approaches in order to obtain a faster bone flap re-ossification, a better aesthetic result, and a lower risks of dural layer and soft tissue damage. PMID:23276764
Krause, Matthias; Drenck, Tobias Claus; Korthaus, Alexander; Preiss, Achim; Frosch, Karl-Heinz; Akoto, Ralph
2018-06-01
The primary purpose of the study was to gain insight into geometric changes of the patellar height (PH) and posterior tibial slope (PTS) after a biplanar ascending medial open-wedge high tibial osteotomy (HTO) compared to biplanar descending medial open-wedge HTO in patients with genu varum. Sixty-four patients (mean age 45.2 ± 8.7 years, females n = 24, males n = 40) with varus malalignment and medial gonarthrosis were retrospectively studied. Patients received either a biplanar ascending or descending medial open-wedge HTO. Radiographic analysis included the assessment of standing total leg axis, PH, and PTS prior to and after surgery. In the ascending HTO group, PH decreased significantly by 4.0% (p = 0.037, Caton-Deschamps index) after an average leg axis valgus-producing correction of 7.1° ± 2.8°. In the descending HTO group, with an average leg axis correction of 7.0° ± 3.7°, there were no significant PH changes. There were no significant differences between the ascending and descending HTO groups regarding PTS or leg axis. The mean post-operative leg axis between ascending (1.6° ± 1.9°) and descending HTO (1.9° ± 2.4°) was not significantly different. Compared to the biplanar ascending medial open-wedge HTO, the descending HTO did not influence patella height or increase the posterior tibial slope. In order to respect patellofemoral and slope-related knee kinematics, a biplanar descending medial open-wedge HTO has proven useful to control patella height and posterior tibial slope. These findings underscore the importance of the preoperative patella height assessment in the osteotomy planning and subsequent choice of the biplanar osteotomy direction. IV.
Ji, Ming-Liang; Qian, Bang-ping; Qiu, Yong; Wang, Bin; Zhu, Ze-zhang; Yu, Yang; Jiang, Jun
2013-10-15
A computed tomographic study. To investigate the change in aortic length in patients with ankylosing spondylitis (AS) with thoracolumbar kyphosis after closing-opening wedge osteotomy (COWO). Several previous studies reported that COWO can effectively correct severe thoracolumbar kyphosis caused by AS. However, one disadvantage of COWO is elongation of the aorta, which increases the risk of aortic injury. To date, no studies have analyzed the alteration in aortic length in patients with AS undergoing COWO for thoracolumbar kyphosis. A total of 21 consecutive patients with AS with a mean age of 38.9 years undergoing COWO for the correction of thoracolumbar kyphosis were retrospectively studied. Radiographical measurements included global kyphosis, thoracic kyphosis, lumbar lordosis, angle of fusion levels, local kyphosis, and anterior height of the osteotomized vertebra. The computed tomographic scans of the spine were used to measure the aortic diameter (at the site of the osteotomy) and length (the length between the superior endplate of the upper instrumented vertebra and the inferior endplate of L4). The aortic length increased by an average of 2.2 cm postoperatively. Significant changes in global kyphosis, local kyphosis, angle of fusion levels, lumbar lordosis, anterior height of the osteotomized vertebra, and aortic diameter at the site of the osteotomy were observed (P < 0.01). Significant correlation was noted between aortic length and changes in global kyphosis (r = 0.525, P = 0.015), local kyphosis (r = 0.654, P = 0.001), angle of fusion levels (r = 0.634, P = 0.002), and lumbar lordosis (r = 0.538, P = 0.012). Aortic lengthening after COWO for correction of kyphosis was quantitatively confirmed by this study. Spine surgeons should be aware of the potential risk for the development of aortic injury in patients with AS undergoing COWO for the correction of thoracolumbar kyphosis. 4.
Screw Versus Plate Fixation for Chevron Osteotomy: A Retrospective Study.
Andrews, Boyd J; Fallat, Lawrence M; Kish, John P
2016-01-01
The chevron osteotomy is a popular procedure used for the correction of moderate hallux abducto valgus deformity. Fixation is typically accomplished with Kirschner wires or bone screws; however, in cystic or osteoporotic bone, these could be inadequate, resulting in displacement of the capital fragment. We propose using a locking plate and interfragmental screw for fixation of the chevron osteotomy that could reduce the healing time and decrease the incidence of displacement. We performed a retrospective cohort study for chevron osteotomies on 75 feet (73 patients). The control groups underwent fixation with 1 screw in 30 feet (40%) and 2 screws in 30 feet (40%). A total of 15 feet (20%) were included in the locking plate and interfragmental screw group. The patients were followed up until bone healing was achieved at a median of 7 (range 6 to 14) weeks. Our hypothesis was that those treated with the locking plate and interfragmental screw would have a faster healing time and fewer incidents of capital fragment displacement compared with the 1- or 2-screw groups. The corresponding mean intervals to healing for the 1-screw group was 7.71 ± 1.28 (range 6 to 10) weeks, for the 2-screw group was 7.27 ± 1.57 (range 6 to 14) weeks, and for the locking plate and interfragmental screw group was 7.01 ± 1.00 (range 6 to 9) weeks. One case of capital fragment displacement occurred in the single screw group and one in the 2-screw group. No displacement occurred in the locking plate and interfragmental screw group. Neither finding was statistically significant. However, we believe the locking plate and interfragmental screw could be a viable option in patients with osteoporotic and cystic bone changes for correction of hallux abducto valgus. Copyright © 2016 American College of Foot and Ankle Surgeons. Published by Elsevier Inc. All rights reserved.
Minimally Invasive and Open Distal Chevron Osteotomy for Mild to Moderate Hallux Valgus.
Brogan, Kit; Lindisfarne, Edward; Akehurst, Harold; Farook, Usama; Shrier, Will; Palmer, Simon
2016-11-01
Minimally invasive surgical (MIS) techniques are increasingly being used in foot and ankle surgery but it is important that they are adopted only once they have been shown to be equivalent or superior to open techniques. We believe that the main advantages of MIS are found in the early postoperative period, but in order to adopt it as a technique longer-term studies are required. The aim of this study was to compare the 2-year outcomes of a third-generation MIS distal chevron osteotomy with a comparable traditional open distal chevron osteotomy for mild-moderate hallux valgus. Our null hypothesis was that the 2 techniques would yield equivalent clinical and radiographic results at 2 years. This was a retrospective cohort study. Eighty-one consecutive feet (49 MIS and 32 open distal chevron osteotomies) were followed up for a minimum 24 months (range 24-58). All patients were clinically assessed using the Manchester-Oxford Foot Questionnaire. Radiographic measures included hallux valgus angle, the intermetatarsal angle, hallux interphalangeal angle, metatarsal phalangeal joint angle, distal metatarsal articular angle, tibial sesamoid position, shape of the first metatarsal head, and plantar offset. Statistical analysis was done using Student t test or Wilcoxon rank-sum test for continuous data and Pearson chi-square test for categorical data. Clinical and radiologic postoperative scores in all domains were substantially improved in both groups (P < .001), but there was no statistically significant difference in improvement of any domain between open and MIS groups (P > .05). There were no significant differences in complications between the 2 groups ( > .5). The midterm results of this third-generation technique show that it was a safe procedure with good clinical outcomes and comparable to traditional open techniques for symptomatic mild-moderate hallux valgus. Level III, retrospective comparative study. © The Author(s) 2016.
Outcomes in chevron osteotomy for Hallux Valgus in a large cohort.
van Groningen, Bart; van der Steen, M C Marieke; Reijman, Max; Bos, Janneke; Hendriks, Johannes G E
2016-12-01
Clinical and radiological related outcomes have been reported for Chevron osteotomy as correction for mild to moderate hallux valgus, but only for relatively small patient series. Moreover, evaluation of the patient's point of view has mostly been conducted by means of more physician-based outcome measures. The goal of this study was to evaluate the effect of the Chevron osteotomy for hallux valgus on patients' daily lives using the Foot and Ankle Outcome Score (FAOS) as a validated and a hallux valgus specific patient reported outcome measure (PROM). Secondary outcome measures were radiological correction, complication rate, and re-operations. All 438 Chevron procedures (336 patients), at two surgical hospital sites in the period between January 2010 and October 2014, were retrospectively evaluated with a follow-up of at least 6 months. Patients were invited to fill in a cross-sectional online FAOS. For the FAOS, a total response of 60% was achieved. The FAOS ranged between 71 and 88 with a follow-up of on average 36 months. Patients with an undercorrection of their hallux valgus (11.6% of the procedures) scored significantly lower on three subscales of the FAOS (range between 61 and 77 versus 72-84). Patients who had a reoperation (12.6% of the procedures) also scored significantly lower on four subscales: 58-100 versus 73-89. Postoperative radiological measurements improved significantly with a mean difference of 6.1 (5.9; 6.4) degrees for the intermetatarsal angle and 13.7 (13.0; 14.5) degrees for the hallux valgus angle. In this large study cohort, Chevron osteotomy for hallux valgus offers good PROM scores on FAOS. These scores were significantly lower in patients with radiological undercorrection or with a reoperation. Results of the FAOS appear to modulate with physician based outcomes and therapeutic incidents. Improvement of outcome may therefore well be possible by increased attention on these surgical details. Copyright © 2016 Elsevier Ltd. All rights reserved.
Kim, Jin Su; Young, Ki Won; Kim, Ji Soo; Lee, Kyung Tai
2017-01-01
Background Fixation of proximal chevron metatarsal osteotomy has been accomplished using K-wires traditionally and with a locking plate recently. However, both methods have many disadvantages. Hence, we developed an intramedullary fixation technique using headless cannulated screws and conducted a biomechanical study to evaluate the superiority of the technique to K-wire and locking plate fixations. Methods Proximal chevron metatarsal osteotomy was performed on 30 synthetic metatarsal models using three fixation techniques. Specimens in group I were fixated with K-wires (1.6 mm × 2) and in group II with headless cannulated screws (3.0 mm × 2) distally through the intramedullary canal. Specimens in group III were fixated with a locking X-shaped plate (1.3-mm thick) and screws (2.5 mm × 4). Eight metatarsal specimens were selected from each group for walking fatigue test. Bending stiffness and dorsal angulation were measured by 1,000 repetitions of a cantilever bending protocol in a plantar to dorsal direction. The remaining two samples from each group were subjected to 5 mm per minute axial loading to assess the maximal loading tolerance. Results All samples in group I failed walking fatigue test while group II and group III tolerated the walking fatigue test. Group II showed greater resistance to bending force and smaller dorsal angulation than group III (p = 0.001). On the axial loading test, group I and group II demonstrated superior maximum tolerance to group III (54.8 N vs. 47.2 N vs. 28.3 N). Conclusions Authors have demonstrated proximal chevron metatarsal osteotomy with intramedullary screw fixation provides superior biomechanical stability to locking plate and K-wire fixations. The new technique using intramedullary screw fixation can offer robust fixation and may lead to better outcomes in surgical treatment of hallux valgus. PMID:29201305
Klemola, Tero; Leppilahti, Juhana; Laine, Vesa; Pentikäinen, Ilkka; Ojala, Risto; Ohtonen, Pasi; Savola, Olli
2017-08-01
Hallux valgus alters gait, compromising first ray stability and function of the windlass mechanism at the late stance. Hallux valgus correction should restore the stability of the first metatarsal. Comparative studies reporting the impact of different hallux valgus correction methods on gait are rare. We report the results of a case-control study between distal chevron osteotomy and first tarsometatarsal joint derotational arthrodesis (FTJDA). Two previously studied hallux valgus cohorts were matched: distal chevron osteotomy and FTJDA. Seventy-seven feet that underwent distal chevron osteotomy (chevron group) and 76 feet that underwent FTJDA (FTJDA group) were available for follow-up, with a mean of 7.9 years (range, 5.8-9.4 years) and 5.1 years (range, 3.0-8.3 years), respectively. Matching criteria were the hallux valgus angle (HVA) and a follow-up time difference of a maximum 24 months. Two matches were made: according to the preoperative HVA and the HVA at late follow-up. Matching provided 30 and 31 pairs, respectively. Relative impulses (%) of the first toe (T1) and metatarsal heads 1 to 5 (MTH1-5), weightbearing radiographs, and American Orthopaedic Foot & Ankle Society (AOFAS) (hallux metatarsophalangeal-interphalangeal [MTP-IP]) scores were studied. The relative impulse of MTH1 was higher in the FTJDA group, whereas a central dynamic loading pattern was seen in the chevron group. This result remained when relative impulses were analyzed according to the postoperative HVA. The mean difference in the HVA at follow-up was 6.2 degrees (95% confidence interval, 3.0-9.5; P = .001) in favor of the FTJDA group. The dynamic loading capacity of MTH1 was higher in the FTJDA group in comparison to the chevron group. The follow-up HVA remained better in the FTJDA group. Level III, case-control study.
Kim, Hyong-Nyun; Park, Yoo-Jung; Kim, Gab-Lae; Park, Yong-Wook
2013-01-01
The purpose of the present study was to investigate the outcomes of distal chevron osteotomy with lateral soft tissue release for moderate to severe hallux valgus. The patients were selected using criteria that included the degree of lateral soft tissue contracture and metatarsocuneiform joint flexibility. The contracture and flexibility were determined from intraoperative varus stress radiographs. From April 2007 to May 2009, 56 feet in 51 consecutive patients with moderate to severe hallux valgus had undergone distal chevron osteotomy with lateral soft tissue release. This was done when the lateral soft tissue contracture was not so severe that passive correction of the hallux valgus deformity was not possible and when the metatarsocuneiform joint was flexible enough to permit additional correction of the first intermetatarsal angle after lateral soft tissue release. The mean patient age was 45.2 (range 23 to 54) years, and the duration of follow-up was 27.5 (range 24 to 46) months. The mean hallux abductus angle decreased from 33.5° ± 3.1° to 11.6° ± 3.3°, and the first intermetatarsal angle decreased from 16.4° ± 2.7° to 9.7° ± 2.1°. The mean American Orthopaedic Foot and Ankle Society hallux-interphalangeal scores increased from 66.6° ± 10.7° to 92.6° ± 9.4° points, and 46 of the 51 patients (90%) were either very satisfied or satisfied with the outcome. No recurrence of deformity or osteonecrosis of the metatarsal head occurred. When lateral soft tissue contracture is not severe and when the metatarsocuneiform joint is flexible enough, distal chevron osteotomy with lateral soft tissue release can be a useful and effective choice for moderate to severe hallux valgus deformity. Copyright © 2013 American College of Foot and Ankle Surgeons. Published by Elsevier Inc. All rights reserved.
Bujnowski, K; Getgood, A; Leitch, K; Farr, J; Dunning, C; Burkhart, T A
2018-02-01
It has been suggested that the use of a pilot-hole may reduce the risk of fracture to the lateral cortex. Therefore the purpose of this study was to determine the effect of a pilot hole on the strains and occurrence of fractures at the lateral cortex during the opening of a high tibial osteotomy (HTO) and post-surgery loading. A total of 14 cadaveric tibias were randomized to either a pilot hole (n = 7) or a no-hole (n = 7) condition. Lateral cortex strains were measured while the osteotomy was opened 9 mm and secured in place with a locking plate. The tibias were then subjected to an initial 800 N load that increased by 200 N every 5000 cycles, until failure or a maximum load of 2500 N. There was no significant difference in the strains on the lateral cortex during HTO opening between the pilot hole and no-hole conditions. Similarly, the lateral cortex and fixation plate strains were not significantly different during cyclic loading between the two conditions. Using a pilot hole did not significantly decrease the strains experienced at the lateral cortex, nor did it reduce the risk of fracture. The nonsignificant differences found here most likely occurred because the pilot hole merely translated the stress concentration laterally to a parallel point on the surface of the hole. Cite this article : K. Bujnowski, A. Getgood, K. Leitch, J. Farr, C. Dunning, T. A. Burkhart. A pilot hole does not reduce the strains or risk of fracture to the lateral cortex during and following a medial opening wedge high tibial osteotomy in cadaveric specimens. Bone Joint Res 2018;7:166-172. DOI: 10.1302/2046-3758.72.BJR-2017-0337.R1.
Lee, Dae-Hee; Park, Sung-Chul; Park, Hyung-Joon; Han, Seung-Beom
2016-12-01
Open-wedge high tibial osteotomy (HTO) cannot always accurately correct limb alignment, resulting in under- or over-correction. This study assessed the relationship between soft tissue laxity of the knee joint and alignment correction in open-wedge HTO. This prospective study involved 85 patients (86 knees) undergoing open-wedge HTO for primary medial osteoarthritis. The mechanical axis (MA), weight-bearing line (WBL) ratio, and joint line convergence angle (JLCA) were measured on radiographs preoperatively and after 6 months, and the differences between the pre- and post-surgery values were calculated. Post-operative WBL ratios of 57-67 % were classified as acceptable correction. WBL ratios <57 and >67 % were classified as under- and over-corrections, respectively. Preoperative JLCA correlated positively with differences in MA (r = 0.358, P = 0.001) and WBL ratio (P = 0.003). Difference in JLCA showed a stronger correlation than preoperative JLCA with differences in MA (P < 0.001) and WBL ratio (P < 0.001). Difference in JLCA was the only predictor of both difference in MA (P < 0.001) and difference in WBL ratio (P < 0.001). The difference between pre- and post-operative JLCA differed significantly between the under-correction, acceptable-correction, and over-correction groups (P = 0.033). Preoperative JLCA, however, did not differ significantly between the three groups. Neither preoperative JLCA nor difference in JLCA correlated with change in posterior slope. Preoperative degree of soft tissue laxity in the knee joint was related to the degree of alignment correction, but not to alignment correction error, in open-wedge HTO. Change in soft tissue laxity around the knee from before to after open-wedge HTO correlated with both correction amount and correction error. Therefore, a too large change in JLCA from before to after open-wedge osteotomy may be due to an overly large reduction in JLCA following osteotomy, suggesting alignment over-correction during surgery. II.
A prospective study on infectious complications in orthognathic surgery.
Spaey, Yannick J E; Bettens, Rolf M A; Mommaerts, Maurice Y; Adriaens, Jo; Van Landuyt, Herman W; Abeloos, Johan V S; De Clercq, Calix A S; Lamoral, Philippe R B; Neyt, Luc F
2005-02-01
According to an earlier study in 2000, 4.7% of patients undergoing corrective facial orthopaedic surgery in this unit suffered a postoperative wound infection. In 1998, the Belgian Government recommended stricter rules for infection prophylaxis and a new antibiotic protocol similar to that proposed by Peterson (1990) was implemented in this unit. The new protocol was to be evaluated. Eight hundred and ten consecutive patients were selected receiving orthognathic surgery (Le Fort I-type osteotomies, sagittal split osteotomies, segmental and chin osteotomies). Cefazolin 1g was administered intravenously on induction of general anaesthesia and repeated at 4h intervals for the duration of surgery. No antibiotics were administered postoperatively. The observation period was 6 weeks. When an infection occurred, appropriate culture specimens were obtained according to a standardized protocol. Fifty-one infections (6.8%) were diagnosed, 33 with purulent exudates occurring spontaneously or after incision and drainage. Ninety-two per cent of these infections occurred in the sagittal split area, 6% in the maxillary region and 2% in the chin region. Infections in the sagittal split area were further analysed. A reduction in infection rate from 6.6 to 2.6% was noted following a change in practice when fibrin glue was used in the wound instead of a drain in the sagittal split wound. Of the 30 aerobic cultures, 12 contained normal mucosal flora, of which 9 were Streptococcus species. In 11 of the 30 anaerobic cultures the identified species belonged to the Bacteroides group. This bacterium is resistant to cefazolin but sensitive to amoxicillin-clavulanate and for a high percentage also to clindamycin. All the other cultures were sterile. The infections occurring almost exclusively in the sagittal split osteotomy site can be partially explained by wound contamination upon removal of the drain. It is suggested that for prophylaxis cefazolin is replaced by amoxicillin-clavulanate.
Degidi, Marco; Daprile, Giuseppe; Piattelli, Adriano
The aims of this study were to evaluate the ability of a stepped osteotomy to improve dental implant primary stability in low-density bone sites and to investigate possible correlations between primary stability parameters. The study was performed on fresh humid bovine bone classified as type III. The test group consisted of 30 Astra Tech EV implants inserted following the protocol provided by the manufacturer. The first control group consisted of 30 Astra Tech EV implants inserted in sites without the underpreparation of the apical portion. The second control group consisted of 30 Astra Tech TX implants inserted following the protocol provided by the manufacturer. Implant insertion was performed at the predetermined 30 rpm. The insertion torque data were recorded and exported as a curve; using a trapezoidal integration technique, the area underlying the curve was calculated: this area represents the variable torque work (VTW). Peak insertion torque (pIT) and resonance frequency analysis (RFA) were also recorded. A Mann-Whitney test showed that the mean VTW was significantly higher in the test group compared with the first control and second control groups; furthermore, statistical analysis showed that pIT also was significantly higher in the test group compared with the first and second control groups. Analyzing RFA values, only the difference between the test group and second control group showed statistical significance. Pearson correlation analysis showed a very strong positive correlation between pIT and VTW values in all groups; furthermore, it showed a positive correlation between pIT and RFA values and between VTW and RFA values only in the test group. Within the limitations of an in vitro study, the results show that stepped osteotomy can be a viable method to improve implant primary stability in low-density bone sites, and that, when a traditional osteotomy method is performed, RFA presents no correlation with pIT and VTW.
Suh, Seung Woo; Modi, Hitesh N; Yang, Jaehyuk; Song, Hae-Ryong; Jang, Ki-Mo
2009-05-20
Prospective study. To determine the effectiveness and correction with posterior multilevel vertebral osteotomy in severe and rigid curves without anterior release. For the correction of severe and rigid scoliotic curve, anterior-posterior combined or posterior vertebral column resection (PVCR) procedures are used. Anterior procedure might compromise pulmonary functions, and PVCR might carry risk of neurologic injuries. Therefore, authors developed a new technique, which reduces both. Thirteen neuromuscular patients (7 cerebral palsy, 2 Duchenne muscular dystrophy, and 4 spinal muscular atrophy) who had rigid curve >100 degrees were prospectively selected. All were operated with posterior-only approach using pedicle screw construct. To achieve desired correction, posterior multilevel vertebral osteotomies were performed at 3 to 5 levels (apex, and 1-2 levels above and below apex) through partial laminotomy sites connecting from concave to convex side, just above the pedicle; and repeated cantilever manipulation was applied over temporary short-segment fixation, above and below the apex, on convex side. On concave side, rod was assembled with screws and rod-derotation maneuver was performed. Finally, short-segment fixation on convex side was replaced with full-length construct. Intraoperative MEP monitoring was applied in all. Mean age was 21 years and average follow-up was 25 months. Average preoperative flexibility was 20.3% (24.1 degrees). Average Cobb's angle, pelvic obliquity, and apical rotation were 118.2 degrees, 16.7 degrees, and 57 degrees preoperatively, respectively, and 48.8 degrees, 8 degrees, and 43 degrees after surgery showing significant correction of 59.4%, 46.1%, and 24.5%. Average number of osteotomy level was 4.2 and average blood loss was 3356 +/- 884 mL. Mean operation time was 330 +/- 46 minutes. None of the patient required postoperative ventilator support or displayed any signs of neurologic or vascular injuries during or after the operation. This technique should be recommended because (1) it provides release of anterior column without anterior approach and (2) our results supports its superiority as a technique.
Pagotto, Luis Eduardo Charles; de Santana Santos, Thiago; de Vasconcellos, Sara Juliana de Abreu; Santos, Joanes Silva; Martins-Filho, Paulo Ricardo Saquete
2017-10-01
The purpose of this study was to perform a systematic review and meta-analysis of complications after orthognathic surgery comparing piezo-surgery with conventional osteotomy. We conducted this study according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. We performed a systematic search of PubMed, Scopus, Science Direct, Lilacs, Cochrane Central Register of Controlled Trials, Google Scholar, and OpenThesis to identify randomized and nonrandomized controlled trials (RCTs and nRCTs, respectively) comparing patient outcomes (operative time, intraoperative blood loss, postoperative swelling, pain, neurosensitivity) after orthognathic surgery by piezoelectric or conventional osteotomy. We pooled individual results of continuous and dichotomous outcome data using the mean difference (MD) and risk difference (RD) with the 95% confidence interval, respectively. Three RCTs and five nRCTs were selected. No difference in operative time was observed between piezo-surgery and conventional osteotomies. We found a decrease of intraoperative blood loss with piezo-surgery (MD -128 mL; P < 0.001) and a pooled difference in severe blood loss of 35% (P = 0.008) favouring piezo-surgery. Based on pooled individual results of studies evaluating neurosensitivity by clinical neurosensory testing, our meta-analysis showed a pooled difference in severe nerve disturbance of 25% (P < 0.0001) favouring piezo-surgery. Test for subgroup differences (I2 = 26.6%) indicated that follow-up time may have an effect on neurosensory disturbance. We found differences between piezo-surgery and conventional osteotomy at 3 months (RD 28%; P < 0.001) and 6 months (RD 15%; P = 0.001) after surgery. Meta-analyses for pain and swelling were not performed because of a lack of sufficient studies. Currently available evidence suggests that piezo-surgery has favorable effects on complications associated with orthognathic surgery, including reductions in intraoperative blood loss and severe nerve disturbance. Copyright © 2017 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.