Science.gov

Sample records for packaging materials

  1. Packaging Your Training Materials

    ERIC Educational Resources Information Center

    Espeland, Pamela

    1977-01-01

    The types of packaging and packaging materials to use for training materials should be determined during the planning of the training programs, according to the packaging market. Five steps to follow in shopping for packaging are presented, along with a list of packaging manufacturers. (MF)

  2. Edible packaging materials.

    PubMed

    Janjarasskul, Theeranun; Krochta, John M

    2010-01-01

    Research groups and the food and pharmaceutical industries recognize edible packaging as a useful alternative or addition to conventional packaging to reduce waste and to create novel applications for improving product stability, quality, safety, variety, and convenience for consumers. Recent studies have explored the ability of biopolymer-based food packaging materials to carry and control-release active compounds. As diverse edible packaging materials derived from various by-products or waste from food industry are being developed, the dry thermoplastic process is advancing rapidly as a feasible commercial edible packaging manufacturing process. The employment of nanocomposite concepts to edible packaging materials promises to improve barrier and mechanical properties and facilitate effective incorporation of bioactive ingredients and other designed functions. In addition to the need for a more fundamental understanding to enable design to desired specifications, edible packaging has to overcome challenges such as regulatory requirements, consumer acceptance, and scaling-up research concepts to commercial applications.

  3. Food Packaging Materials

    NASA Technical Reports Server (NTRS)

    1978-01-01

    The photos show a few of the food products packaged in Alure, a metallized plastic material developed and manufactured by St. Regis Paper Company's Flexible Packaging Division, Dallas, Texas. The material incorporates a metallized film originally developed for space applications. Among the suppliers of the film to St. Regis is King-Seeley Thermos Company, Winchester, Ma'ssachusetts. Initially used by NASA as a signal-bouncing reflective coating for the Echo 1 communications satellite, the film was developed by a company later absorbed by King-Seeley. The metallized film was also used as insulating material for components of a number of other spacecraft. St. Regis developed Alure to meet a multiple packaging material need: good eye appeal, product protection for long periods and the ability to be used successfully on a wide variety of food packaging equipment. When the cost of aluminum foil skyrocketed, packagers sought substitute metallized materials but experiments with a number of them uncovered problems; some were too expensive, some did not adequately protect the product, some were difficult for the machinery to handle. Alure offers a solution. St. Regis created Alure by sandwiching the metallized film between layers of plastics. The resulting laminated metallized material has the superior eye appeal of foil but is less expensive and more easily machined. Alure effectively blocks out light, moisture and oxygen and therefore gives the packaged food long shelf life. A major packaging firm conducted its own tests of the material and confirmed the advantages of machinability and shelf life, adding that it runs faster on machines than materials used in the past and it decreases product waste; the net effect is increased productivity.

  4. Packaging - Materials review

    SciTech Connect

    Herrmann, Matthias

    2014-06-16

    Nowadays, a large number of different electrochemical energy storage systems are known. In the last two decades the development was strongly driven by a continuously growing market of portable electronic devices (e.g. cellular phones, lap top computers, camcorders, cameras, tools). Current intensive efforts are under way to develop systems for automotive industry within the framework of electrically propelled mobility (e.g. hybrid electric vehicles, plug-in hybrid electric vehicles, full electric vehicles) and also for the energy storage market (e.g. electrical grid stability, renewable energies). Besides the different systems (cell chemistries), electrochemical cells and batteries were developed and are offered in manymore » shapes, sizes and designs, in order to meet performance and design requirements of the widespread applications. Proper packaging is thereby one important technological step for designing optimum, reliable and safe batteries for operation. In this contribution, current packaging approaches of cells and batteries together with the corresponding materials are discussed. The focus is laid on rechargeable systems for industrial applications (i.e. alkaline systems, lithium-ion, lead-acid). In principle, four different cell types (shapes) can be identified - button, cylindrical, prismatic and pouch. Cell size can be either in accordance with international (e.g. International Electrotechnical Commission, IEC) or other standards or can meet application-specific dimensions. Since cell housing or container, terminals and, if necessary, safety installations as inactive (non-reactive) materials reduce energy density of the battery, the development of low-weight packages is a challenging task. In addition to that, other requirements have to be fulfilled: mechanical stability and durability, sealing (e.g. high permeation barrier against humidity for lithium-ion technology), high packing efficiency, possible installation of safety devices (current interrupt

  5. Packaging - Materials review

    NASA Astrophysics Data System (ADS)

    Herrmann, Matthias

    2014-06-01

    Nowadays, a large number of different electrochemical energy storage systems are known. In the last two decades the development was strongly driven by a continuously growing market of portable electronic devices (e.g. cellular phones, lap top computers, camcorders, cameras, tools). Current intensive efforts are under way to develop systems for automotive industry within the framework of electrically propelled mobility (e.g. hybrid electric vehicles, plug-in hybrid electric vehicles, full electric vehicles) and also for the energy storage market (e.g. electrical grid stability, renewable energies). Besides the different systems (cell chemistries), electrochemical cells and batteries were developed and are offered in many shapes, sizes and designs, in order to meet performance and design requirements of the widespread applications. Proper packaging is thereby one important technological step for designing optimum, reliable and safe batteries for operation. In this contribution, current packaging approaches of cells and batteries together with the corresponding materials are discussed. The focus is laid on rechargeable systems for industrial applications (i.e. alkaline systems, lithium-ion, lead-acid). In principle, four different cell types (shapes) can be identified - button, cylindrical, prismatic and pouch. Cell size can be either in accordance with international (e.g. International Electrotechnical Commission, IEC) or other standards or can meet application-specific dimensions. Since cell housing or container, terminals and, if necessary, safety installations as inactive (non-reactive) materials reduce energy density of the battery, the development of low-weight packages is a challenging task. In addition to that, other requirements have to be fulfilled: mechanical stability and durability, sealing (e.g. high permeation barrier against humidity for lithium-ion technology), high packing efficiency, possible installation of safety devices (current interrupt device

  6. 19 CFR 191.13 - Packaging materials.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 19 Customs Duties 2 2012-04-01 2012-04-01 false Packaging materials. 191.13 Section 191.13 Customs... (CONTINUED) DRAWBACK General Provisions § 191.13 Packaging materials. (a) Imported packaging material... packaging material when used to package or repackage merchandise or articles exported or destroyed pursuant...

  7. 19 CFR 191.13 - Packaging materials.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 19 Customs Duties 2 2010-04-01 2010-04-01 false Packaging materials. 191.13 Section 191.13 Customs... (CONTINUED) DRAWBACK General Provisions § 191.13 Packaging materials. (a) Imported packaging material... packaging material when used to package or repackage merchandise or articles exported or destroyed pursuant...

  8. IECL Energy Conservation Material Package.

    ERIC Educational Resources Information Center

    Colorado State Dept. of Education, Denver. Interstate Energy Conservation Leadership.

    This publication presents information on how schools and school districts can save energy. The energy conservation materials contained in this package are organized into two sections. The section titles are: (1) Towards a State Education Energy Policy; and (2) Materials for Distribution to School Districts. Topics presented in the first section…

  9. Hazardous Material Packaging and Transportation

    SciTech Connect

    Hypes, Philip A.

    2016-02-04

    This is a student training course. Some course objectives are to: recognize and use standard international and US customary units to describe activities and exposure rates associated with radioactive material; determine whether a quantity of a single radionuclide meets the definition of a class 7 (radioactive) material; determine, for a given single radionuclide, the shipping quantity activity limits per 49 Code of Federal Regulations (CFR) 173.435; determine the appropriate radioactive material hazard class proper shipping name for a given material; determine when a single radionuclide meets the DOT definition of a hazardous substance; determine the appropriate packaging required for amore » given radioactive material; identify the markings to be placed on a package of radioactive material; determine the label(s) to apply to a given radioactive material package; identify the entry requirements for radioactive material labels; determine the proper placement for radioactive material label(s); identify the shipping paper entry requirements for radioactive material; select the appropriate placards for a given radioactive material shipment or vehicle load; and identify allowable transport limits and unacceptable transport conditions for radioactive material.« less

  10. Polyhydroxyalkanoates (PHA) Bioplastic Packaging Materials

    DTIC Science & Technology

    2010-05-01

    FINAL REPORT Polyhydroxyalkanoates (PHA) Bioplastic Packaging Materials SERDP Project WP-1478 MAY 2010 Dr.Chris Schwier Metabolix...biopolymer, biodegradable, polyhydroxyalkanoate 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF ABSTRACT 18. NUMBER OF PAGES 19a. NAME OF...Acronyms and Definitions ASTM – American Society of Test Methods ISO – International Standardization Organization PHA – Polyhydroxyalkanoates

  11. 9 CFR 381.144 - Packaging materials.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 9 Animals and Animal Products 2 2014-01-01 2014-01-01 false Packaging materials. 381.144 Section... Packaging materials. (a) Edible products may not be packaged in a container which is composed in whole or in... to health. All packaging materials must be safe for the intended use within the meaning of section...

  12. 9 CFR 381.144 - Packaging materials.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 9 Animals and Animal Products 2 2012-01-01 2012-01-01 false Packaging materials. 381.144 Section... Packaging materials. (a) Edible products may not be packaged in a container which is composed in whole or in... to health. All packaging materials must be safe for the intended use within the meaning of section...

  13. Risk assessment of packaging materials.

    PubMed

    Munro, C; Hlywka, J J; Kennepohl, E M

    2002-01-01

    Risk assessment of packaging materials provides a unique challenge. Human exposure to packaging materials and/or their components occurs from migration into foods. There are various methods for determining migration into foods. Unlike most food additives, these exposures typically are very small. Because of this, and since complete toxicological data sets are not always available for packaging materials, the US Food and Drug Administration (FDA) has developed a process to make the evaluation of packaging materials more efficient, instead of the extensive review normally required for food additives. This process is used to determine 'when the likelihood or extent of migration to food of a substance used in a food-contact article is so trivial as not to require regulation of the substance as a food additive'. This trivial level, also known as the threshold of regulation, was based upon a large database of carcinogenic potencies and was determined to be 1.5 microg/person day(-1). This was determined to 'be low enough to ensure that the public health is protected, even in the event that a substance exempted from regulation as a food additive is later found to be a carcinogen'. Substances not having structural alerts, or that are not known carcinogens or potent toxins, based on existing toxicological information, and are below the threshold value, are considered by the FDA to be exempted from regulation as food additives. The threshold of regulation approach used by the FDA provides an excellent model by which to evaluate the majority of packaging materials.

  14. CUSHIONING MATERIALS FOR PACKAGING: BIBLIOGRAPHY

    SciTech Connect

    Strachwitz, F. comp.

    1959-05-01

    In this brief bibliography the emphasis is on new cushioning materials for packaging and on environmental testing and performance of these materials. The survey is not intended to be exhaustive. The following sources were consulted: Technical Abstract Bulletin of the Armed Services Technical Information Agency, Sandia Unclassified Documents Catalog, U. S. Government Research Reports, Technical Information Pilot of the Library of Congress, and Engineering Index. (auth)

  15. 9 CFR 317.24 - Packaging materials.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 9 Animals and Animal Products 2 2014-01-01 2014-01-01 false Packaging materials. 317.24 Section... INSPECTION AND CERTIFICATION LABELING, MARKING DEVICES, AND CONTAINERS General § 317.24 Packaging materials... packaging materials must be safe for their intended use within the meaning of section 409 of the Federal...

  16. 9 CFR 317.24 - Packaging materials.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 9 Animals and Animal Products 2 2012-01-01 2012-01-01 false Packaging materials. 317.24 Section... INSPECTION AND CERTIFICATION LABELING, MARKING DEVICES, AND CONTAINERS General § 317.24 Packaging materials... packaging materials must be safe for their intended use within the meaning of section 409 of the Federal...

  17. 9 CFR 381.144 - Packaging materials.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... to health. All packaging materials must be safe for the intended use within the meaning of section..., from the packaging supplier under whose brand name and firm name the material is marketed to the... distinguishing brand name or code designation appearing on the packaging material shipping container; must...

  18. 9 CFR 381.144 - Packaging materials.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... to health. All packaging materials must be safe for the intended use within the meaning of section..., from the packaging supplier under whose brand name and firm name the material is marketed to the... distinguishing brand name or code designation appearing on the packaging material shipping container; must...

  19. Materials in electronic packaging at APL

    NASA Astrophysics Data System (ADS)

    Charles, Harry K., Jr.

    1993-03-01

    The use of modern electronic packaging materials is examined with reference to general classes of materials, such as epoxies, silicones, metals, alloys, and ceramics. Specific examples are presented to illustrate how the proper choice of materials has enhanced circuit performance and long-term reliability. Applications discussed include single-chip and multichip packaging, board and substrate structures, die (substrate) attachment and electrical interconnection, circuit and board passivation, and encapsulation or package sealing.

  20. Recyclability and the selection of packaging materials

    NASA Astrophysics Data System (ADS)

    Berry, David

    1992-12-01

    Costs of solid-waste disposal, concern for environmental impact, and "green" marketing opportunities have placed more attention on recyclability of packaging materials. Recyclability is determined not only by the characteristics of materials themselves, but also by the presence or absence of collection facilities, ease of separation, technology for reprocessing, and markets for recovered materials. By these measures, packaging materials are becoming more recyclable and recyclability is growing in importance as a factor in material selection.

  1. RECLAMATION OF RADIOACTIVE MATERIAL PACKAGING COMPONENTS

    SciTech Connect

    Abramczyk, G.; Nathan, S.; Loftin, B.

    2011-06-06

    Radioactive material packages are withdrawn from use for various reasons; loss of mission, decertification, damage, replacement, etc. While the packages themselves may be decertified, various components may still be able to perform to their required standards and find useful service. The Packaging Technology and Pressurized Systems group of the Savannah River National Laboratory has been reducing the cost of producing new Type B Packagings by reclaiming, refurbishing, and returning to service the containment vessels from older decertified packagings. The program and its benefits are presented.

  2. The Model 9977 Radioactive Material Packaging Primer

    SciTech Connect

    Abramczyk, G.

    2015-10-09

    The Model 9977 Packaging is a single containment drum style radioactive material (RAM) shipping container designed, tested and analyzed to meet the performance requirements of Title 10 the Code of Federal Regulations Part 71. A radioactive material shipping package, in combination with its contents, must perform three functions (please note that the performance criteria specified in the Code of Federal Regulations have alternate limits for normal operations and after accident conditions): Containment, the package must “contain” the radioactive material within it; Shielding, the packaging must limit its users and the public to radiation doses within specified limits; and Subcriticality, themore » package must maintain its radioactive material as subcritical« less

  3. Hazardous Materials Packaging and Transportation Safety

    DOT National Transportation Integrated Search

    1995-09-27

    To establish safety requirements for the proper packaging and : transportation of Department of Energy (DOE) offsite shipments and onsite transfers of hazardous materials and for modal transport. (Offsite is any area within or outside a DOE site to w...

  4. Compostability of bioplastic packaging materials: an overview.

    PubMed

    Kale, Gaurav; Kijchavengkul, Thitisilp; Auras, Rafael; Rubino, Maria; Selke, Susan E; Singh, Sher Paul

    2007-03-08

    Packaging waste accounted for 78.81 million tons or 31.6% of the total municipal solid waste (MSW) in 2003 in the USA, 56.3 million tons or 25% of the MSW in 2005 in Europe, and 3.3 million tons or 10% of the MSW in 2004 in Australia. Currently, in the USA the dominant method of packaging waste disposal is landfill, followed by recycling, incineration, and composting. Since landfill occupies valuable space and results in the generation of greenhouse gases and contaminants, recovery methods such as reuse, recycling and/or composting are encouraged as a way of reducing packaging waste disposal. Most of the common materials used in packaging (i.e., steel, aluminum, glass, paper, paperboard, plastics, and wood) can be efficiently recovered by recycling; however, if packaging materials are soiled with foods or other biological substances, physical recycling of these materials may be impractical. Therefore, composting some of these packaging materials is a promising way to reduce MSW. As biopolymers are developed and increasingly used in applications such as food, pharmaceutical, and consumer goods packaging, composting could become one of the prevailing methods for disposal of packaging waste provided that industry, governments, and consumers encourage and embrace this alternative. The main objective of this article is to provide an overview of the current situation of packaging compostability, to describe the main mechanisms that make a biopolymer compostable, to delineate the main methods to compost these biomaterials, and to explain the main standards for assessing compostability, and the current status of biopolymer labeling. Biopolymers such as polylactide and poly(hydroxybutyrate) are increasingly becoming available for use in food, medical, and consumer goods packaging applications. The main claims of these new biomaterials are that they are obtained from renewable resources and that they can be biodegraded in biological environments such as soil and compost

  5. 9 CFR 317.24 - Packaging materials.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... packaging materials must be safe for their intended use within the meaning of section 409 of the Federal... supplier under whose brand name and firm name the material is marketed to the official establishment. The... additive regulations. The guaranty must identify the material, e.g., by the distinguishing brand name or...

  6. 9 CFR 317.24 - Packaging materials.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... packaging materials must be safe for their intended use within the meaning of section 409 of the Federal... supplier under whose brand name and firm name the material is marketed to the official establishment. The... additive regulations. The guaranty must identify the material, e.g., by the distinguishing brand name or...

  7. Packaging and transportation of radioactive materials

    SciTech Connect

    None

    1978-01-01

    The presentations made at the Symposium on Packaging and Transportation of Radioactive Materials are included. The purpose of the meeting was for the interchange of information on the technology and politics of radioactive material transportation. Separate abstracts were prepared for individual items. (DC)

  8. 9 CFR 317.24 - Packaging materials.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 317.24 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE... Food, Drug, and Cosmetic Act, as amended (FFDCA). (b) Packaging materials entering the official... guaranty shall state that the material's intended use complies with the FFDCA and all applicable food...

  9. Silicone materials for LED packaging

    NASA Astrophysics Data System (ADS)

    Bahadur, Maneesh; Norris, Ann W.; Zarisfi, Afrooz; Alger, James S.; Windiate, Christopher C.

    2006-08-01

    Silicone based materials have attracted considerable attention from light emitting diode (LED) manufacturers for use as encapsulants and lenses for many high brightness LED (HB LED) devices. Currently silicones function in two key roles in HB LED devices, (1) as protective lenses and (2) stress relieving encapsulants for wire bond protection. The key attributes of silicones that make them attractive as light path materials for high brightness HB LEDs include their high transparency in the UV-visible region, controlled refractive index (RI), stable thermo-mechanical properties, and tuneable modulus from soft gels to hard resins. This paper will describe recent developments in moldable silicone hard resin materials. Progress on cavity moldable and liquid injection moldable (LIM) silicone compositions for discreet components is described. Also, an example of liquid injection overmolding is presented.

  10. Effectiveness of antimicrobial food packaging materials.

    PubMed

    Cooksey, K

    2005-10-01

    Antimicrobial additives have been used successfully for many years as direct food additives. The literature provides evidence that some of these additives may be effective as indirect food additives incorporated into food packaging materials. Antimicrobial food packaging is directed toward the reduction of surface contamination of processed, prepared foods such as sliced meats and Frankfurter sausages (hot dogs). The use of such packaging materials is not meant to be a substitute for good sanitation practices, but it should enhance the safety of food as an additional hurdle for the growth of pathogenic and/or spoilage microorganisms. Studies have focused on establishing methods for coating low-density polyethylene film or barrier films with methyl cellulose as a carrier for nisin. These films have significantly reduced the presence of Listeria monocytogenes in solutions and in vacuum packaged hot dogs. Other research has focused on the use of chitosan to inhibit L. monocytogenes and chlorine dioxide sachets for the reduction of Salmonella on modified atmosphere-packaged fresh chicken breasts. Overall, antimicrobial packaging shows promise as an effective method for the inhibition of certain bacteria in foods, but barriers to their commercial implementation continue to exist.

  11. Sorption of unoprostone isopropyl to packaging materials.

    PubMed

    Wong, Michelle; Marion, Robert; Reed, Ken; Wang, Youmin

    2006-01-13

    This study investigated the stability of an ophthalmic solution formulation of unoprostone isopropyl (UI), a prostaglandin like compound, in two types of packaging materials, polypropylene (PP) and low-density polyethylene (LDPE). We determined the concentration of UI and its degradation products as a function of time and found that the rate of disappearance of drug was faster for the formulation stored in LDPE bottles than that stored in PP bottles. Further studies indicated that the inferior stability observed with the LDPE packaging was primarily due to the sorption of UI to the packaging material and to a lesser degree, chemical degradation. The sorption was temperature dependent, lowering the temperature reduced the sorption, thus improving the shelf-life of the product.

  12. Chitosan films and blends for packaging material.

    PubMed

    van den Broek, Lambertus A M; Knoop, Rutger J I; Kappen, Frans H J; Boeriu, Carmen G

    2015-02-13

    An increased interest for hygiene in everyday life as well as in food, feed and medical issues lead to a strong interest in films and blends to prevent the growth and accumulation of harmful bacteria. A growing trend is to use synthetic and natural antimicrobial polymers, to provide non-migratory and non-depleting protection agents for application in films, coatings and packaging. In food packaging, antimicrobial effects add up to the barrier properties of the materials, to increase the shelf life and product quality. Chitosan is a natural bioactive polysaccharide with intrinsic antimicrobial activity and, due to its exceptional physicochemical properties imparted by the polysaccharide backbone, has been recognized as a natural alternative to chemically synthesized antimicrobial polymers. This, associated with the increasing preference for biofunctional materials from renewable resources, resulted in a significant interest on the potential for application of chitosan in packaging materials. In this review we describe the latest developments of chitosan films and blends as packaging material. Copyright © 2014 Elsevier Ltd. All rights reserved.

  13. Polylactide nanocomposites for packaging materials: A review

    NASA Astrophysics Data System (ADS)

    Widiastuti, Indah

    2016-02-01

    This review aims at highlighting on an attempt for improving the properties of polylactide (PLA) as packaging material by application of nanocomposite technology. PLA is attracting considerable interest because of more eco-friendliness from its origin as contrast to the petrochemical-based polymers and its biodegradability. Despite possessing good mechanical and optical properties, deterioration of the material properties in PLA materials during their service time could occur after prolonged exposure to humidity and high temperature condition. Limited gas barrier is another drawback of PLA material that should be overcome to satisfy the requirement for packaging application. To further extend the range of mechanical and thermal properties achievable, several attempts have been made in modifying the material such as blending with other polymers, use of plasticizing material and development of PLA nanocomposites. Nanocomposite is a fairly new type of composite that has emerged in which the reinforcing filler has nanometer scale dimensions (at least one dimension of the filler is less than 100 nm). In this review, the critical properties of PLA as packaging materials and its degradation mechanism are presented. This paper discusses the current effort and key research challenges in the development of nanocomposites based on biodegradable polymer matrices and nano-fillers. The PLA layered silicate nanocomposites where the filler platelets can be dispersed in the polymer at the nanometer scale owing to the specific filler surface modification, frequently exhibits remarkable improvements of mechanical strength, gas barrier and thermal stability.

  14. 19 CFR 10.601 - Retail packaging materials and containers.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Retail packaging materials and containers. 10.601...-Central America-United States Free Trade Agreement Rules of Origin § 10.601 Retail packaging materials and containers. (a) Effect on tariff shift rule. Packaging materials and containers in which a good is packaged...

  15. 19 CFR 10.539 - Retail packaging materials and containers.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Retail packaging materials and containers. 10.539...-Singapore Free Trade Agreement Rules of Origin § 10.539 Retail packaging materials and containers. Packaging... requirement, the value of such packaging materials and containers will be taken into account as originating or...

  16. 19 CFR 10.539 - Retail packaging materials and containers.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 19 Customs Duties 1 2011-04-01 2011-04-01 false Retail packaging materials and containers. 10.539...-Singapore Free Trade Agreement Rules of Origin § 10.539 Retail packaging materials and containers. Packaging materials and containers in which a good is packaged for retail sale, if classified with the good for which...

  17. 49 CFR 173.36 - Hazardous materials in Large Packagings.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... an inner packaging is constructed of paper or flexible plastic, the inner packaging must be replaced... 49 Transportation 2 2012-10-01 2012-10-01 false Hazardous materials in Large Packagings. 173.36...-GENERAL REQUIREMENTS FOR SHIPMENTS AND PACKAGINGS Preparation of Hazardous Materials for Transportation...

  18. 49 CFR 173.36 - Hazardous materials in Large Packagings.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... an inner packaging is constructed of paper or flexible plastic, the inner packaging must be replaced... 49 Transportation 2 2013-10-01 2013-10-01 false Hazardous materials in Large Packagings. 173.36...-GENERAL REQUIREMENTS FOR SHIPMENTS AND PACKAGINGS Preparation of Hazardous Materials for Transportation...

  19. 49 CFR 173.36 - Hazardous materials in Large Packagings.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... an inner packaging is constructed of paper or flexible plastic, the inner packaging must be replaced... 49 Transportation 2 2014-10-01 2014-10-01 false Hazardous materials in Large Packagings. 173.36...-GENERAL REQUIREMENTS FOR SHIPMENTS AND PACKAGINGS Preparation of Hazardous Materials for Transportation...

  20. 49 CFR 173.36 - Hazardous materials in Large Packagings.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Hazardous materials in Large Packagings. 173.36...-GENERAL REQUIREMENTS FOR SHIPMENTS AND PACKAGINGS Preparation of Hazardous Materials for Transportation § 173.36 Hazardous materials in Large Packagings. (a) No person may offer or accept a hazardous material...

  1. Ammonia gas permeability of meat packaging materials.

    PubMed

    Karim, Faris; Hijaz, Faraj; Kastner, Curtis L; Smith, J Scott

    2011-03-01

    Meat products are packaged in polymer films designed to protect the product from exterior contaminants such as light, humidity, and harmful chemicals. Unfortunately, there is almost no data on ammonia permeability of packaging films. We investigated ammonia permeability of common meat packaging films: low-density polyethylene (LDPE; 2.2 mil), multilayer polyolefin (MLP; 3 mil), and vacuum (V-PA/PE; 3 mil, 0.6 mil polyamide/2.4 mil polyethylene). The films were fabricated into 10 × 5 cm pouches and filled with 50 mL deionized water. Pouches were placed in a plexiglass enclosure in a freezer and exposed to 50, 100, 250, or 500 ppm ammonia gas for 6, 12, 24, and 48 h at -17 ± 3 °C and 21 ± 3 °C. At freezing temperatures, no ammonia residues were detected and no differences in pH were found in the water. At room temperature, ammonia levels and pH of the water increased significantly (P < 0.05) with increasing exposure times and ammonia concentrations. Average ammonia levels in the water were 7.77 ppm for MLP, 5.94 ppm for LDPE, and 0.89 ppm for V-PA/PE at 500 ppm exposure for 48 h at 21 ± 3 °C. Average pH values were 8.64 for MLP, 8.38 for LDPE, and 7.23 for V-PA/PE (unexposed ranged from 5.49 to 6.44) at 500 ppm exposure for 48 h. The results showed that temperature influenced ammonia permeability. Meat packaging materials have low ammonia permeability and protect meat products exposed to ammonia leaks during frozen storage.

  2. An overview of polylactides as packaging materials.

    PubMed

    Auras, Rafael; Harte, Bruce; Selke, Susan

    2004-09-16

    Polylactide polymers have gained enormous attention as a replacement for conventional synthetic packaging materials in the last decade. By being truly biodegradable, derived from renewable resources and by providing consumers with extra end-use benefits such as avoiding paying the "green tax" in Germany or meeting environmental regulations in Japan, polylactides (PLAs) are a growing alternative as a packaging material for demanding markets. The aim of this paper is to review the production techniques for PLAs, summarize the main properties of PLA and to delineate the main advantages and disadvantages of PLA as a polymeric packaging material. PLA films have better ultraviolet light barrier properties than low density polyethylene (LDPE), but they are slightly worse than those of cellophane, polystyrene (PS) and poly(ethylene terephthalate) (PET). PLA films have mechanical properties comparable to those of PET and better than those of PS. PLA also has lower melting and glass transition temperatures than PET and PS. The glass transition temperature of PLA changes with time. Humidity between 10 and 95% and storage temperatures of 5 to 40 degrees C do not have an effect on the transition temperature of PLA, which can be explained by its low water sorption values (i.e. <100 ppm at Aw = 1). PLA seals well at temperatures below the melting temperature but an appreciable shrinking of the films has been noted when the material is sealed near its melting temperature. Solubility parameter predictions indicate that PLA will interact with nitrogen compounds, anhydrides and some alcohols and that it will not interact with aromatic hydrocarbons, ketones, esters, sulfur compounds or water. The CO2, O2 and water permeability coefficients of PLA are lower than those of PS and higher than those of PET. Its barrier to ethyl acetate and D-limonene is comparable to PET. The amount of lactic acid and its derivatives that migrate to food simulant solutions from PLA is much lower than any

  3. Plasticizers effect on native biodegradable package materials

    NASA Astrophysics Data System (ADS)

    Cozar, Onuc; Cioica, Nicolae; Coţa, Constantin; Nagy, Elena Mihaela; Fechete, Radu

    2017-01-01

    Changes in intensity of some IR and Raman bands suggest the plasticizing - antiplasticizing effects of water and glycerol contents and a small increase of amorphous/crystalline ratio, too. The nuclear magnetic relaxation data show that the amorphous/crystalline ratio depends on amylose/amylopectin mobility and also by the place of their polymer chain segments. Thus the distributions of spin-spin (T2) relaxation times and the shift toward higher values of some T2 characteristic peaks show that the increasing of water and glycerol content in the starch package materials lead to the more mobile amylose and amylopectin polymer chain segments and the prevalence of amorphous regions in the prepared native corn starch samples.

  4. Exposure Assessment of Chemicals from Packaging Materials

    NASA Astrophysics Data System (ADS)

    Poças, Maria De Fátima; Hogg, Timothy

    A variety of chemicals may enter our food supply, by means of intentional or unintentional addition, at different stages of the food chain. These chemicals include food additives, pesticide residues, environmental contaminants, mycotox-ins, flavoring substances, and micronutrients. Packaging systems and other food-contact materials are also a source of chemicals contaminating food products and beverages. Monitoring exposure to these chemicals has become an integral part of ensuring the safety of the food supply. Within the context of the risk analysis approach and more specifically as an integral part of risk assessment procedures, the exercise known as exposure assessment is crucial in providing data to allow sound judgments concerning risks to human health. The exercise of obtaining this data is part of the process of revealing sources of contamination and assessing the effectiveness of strategies for minimizing the risk from chemical contamination in the food supply (Lambe, 2002).

  5. A multidimensional environmental evaluation of packaging materials.

    PubMed

    Huang, Chien-Chung; Ma, Hwong-Wen

    2004-05-25

    To reduce environmental damage, the properties of environmental issues must be understood. Most previous research has performed relevant assessment either qualitatively or quantitatively. This paper provides a new comprehensive evaluative framework to integrate these two types of approaches. Three methods are combined: (1) life cycle assessment (LCA), a quantitative method, to assess environmental loading, (2) analytic hierarchy process (AHP), a qualitative method, to obtain opinions from experts, and (3) cluster analysis to integrate the results of the former two methods. This new framework could provide integrated information and avoid a bias towards either qualitative or quantitative approach. To present the process of this new evaluative framework, packaging materials are selected as the case study in this paper.

  6. 75 FR 60333 - Hazardous Material; Miscellaneous Packaging Amendments

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-09-30

    ... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration 49 CFR Parts... Packaging Amendments AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA), DOT. ACTION: Final rule. SUMMARY: On February 2, 2010, the Pipeline and Hazardous Materials Safety Administration...

  7. 49 CFR 173.36 - Hazardous materials in Large Packagings.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 2 2011-10-01 2011-10-01 false Hazardous materials in Large Packagings. 173.36 Section 173.36 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS REGULATIONS SHIPPERS-GENERAL REQUIREMENTS FOR SHIPMENTS AND PACKAGINGS...

  8. 19 CFR 10.601 - Retail packaging materials and containers.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 19 Customs Duties 1 2011-04-01 2011-04-01 false Retail packaging materials and containers. 10.601...-Central America-United States Free Trade Agreement Rules of Origin § 10.601 Retail packaging materials and... for retail sale, if classified with the good for which preferential tariff treatment under the CAFTA...

  9. Packaging material for thin film lithium batteries

    DOEpatents

    Bates, John B.; Dudney, Nancy J.; Weatherspoon, Kim A.

    1996-01-01

    A thin film battery including components which are capable of reacting upon exposure to air and water vapor incorporates a packaging system which provides a barrier against the penetration of air and water vapor. The packaging system includes a protective sheath overlying and coating the battery components and can be comprised of an overlayer including metal, ceramic, a ceramic-metal combination, a parylene-metal combination, a parylene-ceramic combination or a parylene-metal-ceramic combination.

  10. THERMAL PERFORMANCE OF RADIOACTIVE MATERIAL PACKAGES IN TRANSPORT CONFIGURATION

    SciTech Connect

    Gupta, N.

    2010-03-04

    Drum type packages are routinely used to transport radioactive material (RAM) in the U.S. Department of Energy (DOE) complex. These packages are designed to meet the federal regulations described in 10 CFR Part 71. The packages are transported in specially designed vehicles like Safe Secure Transport (SST) for safety and security. In the transport vehicles, the packages are placed close to each other to maximize the number of units in the vehicle. Since the RAM contents in the packagings produce decay heat, it is important that they are spaced sufficiently apart to prevent overheating of the containment vessel (CV) sealsmore » and the impact limiter to ensure the structural integrity of the package. This paper presents a simple methodology to assess thermal performance of a typical 9975 packaging in a transport configuration.« less

  11. THERMAL UPGRADING OF 9977 RADIOACTIVE MATERIAL (RAM) TYPE B PACKAGE

    SciTech Connect

    Gupta, N.; Abramczyk, G.

    2012-03-26

    The 9977 package is a radioactive material package that was originally certified to ship Heat Sources and RTG contents up to 19 watts and it is now being reviewed to significantly expand its contents in support of additional DOE missions. Thermal upgrading will be accomplished by employing stacked 3013 containers, a 3013 aluminum spacer and an external aluminum sleeve for enhanced heat transfer. The 7th Addendum to the original 9977 package Safety Basis Report describing these modifications is under review for the DOE certification. The analyses described in this paper show that this well-designed and conservatively analyzed package can bemore » upgraded to carry contents with decay heat up to 38 watts with some simple design modifications. The Model 9977 package has been designed as a replacement for the Department of Transportation (DOT) Fissile Specification 6M package. The 9977 package is a very versatile Type B package which is certified to transport and store a wide spectrum of radioactive materials. The package was analyzed quite conservatively to increase its usefulness and store different payload configurations. Its versatility is evident from several daughter packages such as the 9978 and H1700, and several addendums where the payloads have been modified to suit the Shipper's needs without additional testing.« less

  12. Effects of packaging materials on storage quality of peanut kernels.

    PubMed

    Fu, Xiaoji; Xing, Shengping; Xiong, Huiwei; Min, Hua; Zhu, Xuejing; He, Jialin; Feng, Jianxiong; Mu, Honglei

    2018-01-01

    In order to obtain optimum packaging materials for peanut kernels, the effects of four types of packaging materials on peanut storage quality (coat color, acid value, germination rate, relative damage, and prevention of aflatoxin contamination) were examined. The results showed that packaging materials had a major influence on peanut storage quality indexes. The color of the peanut seed coat packaged in the polyester/aluminum/polyamide/polyethylene (PET/AL/PA/PE) composite film bag did not change significantly during the storage period. Color deterioration was slower with polyamide/polyethylene (PA/PE) packaging materials than with polyethylene (PE) film bags and was slower in PE bags than in the woven bags. The use of PET/AL/PA/PE and PA/PE bags maintained peanut quality and freshness for more than one year and both package types resulted in better germination rates. There were significant differences between the four types of packaging materials in terms of controlling insect pests. The peanuts packaged in the highly permeable woven bags suffered serious invasion from insect pests, while both PET/AL/PA/PE and PA/PE bags effectively prevented insect infection. Peanuts stored in PET/AL/PA/PE and PA/PE bags were also better at preventing and controlling aflatoxin contamination.

  13. Effects of packaging materials on storage quality of peanut kernels

    PubMed Central

    Fu, Xiaoji; Xing, Shengping; Xiong, Huiwei; Min, Hua; Zhu, Xuejing; He, Jialin; Mu, Honglei

    2018-01-01

    In order to obtain optimum packaging materials for peanut kernels, the effects of four types of packaging materials on peanut storage quality (coat color, acid value, germination rate, relative damage, and prevention of aflatoxin contamination) were examined. The results showed that packaging materials had a major influence on peanut storage quality indexes. The color of the peanut seed coat packaged in the polyester/aluminum/polyamide/polyethylene (PET/AL/PA/PE) composite film bag did not change significantly during the storage period. Color deterioration was slower with polyamide/polyethylene (PA/PE) packaging materials than with polyethylene (PE) film bags and was slower in PE bags than in the woven bags. The use of PET/AL/PA/PE and PA/PE bags maintained peanut quality and freshness for more than one year and both package types resulted in better germination rates. There were significant differences between the four types of packaging materials in terms of controlling insect pests. The peanuts packaged in the highly permeable woven bags suffered serious invasion from insect pests, while both PET/AL/PA/PE and PA/PE bags effectively prevented insect infection. Peanuts stored in PET/AL/PA/PE and PA/PE bags were also better at preventing and controlling aflatoxin contamination. PMID:29518085

  14. 75 FR 75157 - Importation of Wood Packaging Material From Canada

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-02

    ... Inspection Service 7 CFR Part 319 [Docket No. APHIS-2010-0019] RIN 0579-AD28 Importation of Wood Packaging.... SUMMARY: We are proposing to amend the regulations for the importation of unmanufactured wood articles to remove the exemption that allows wood packaging material from Canada to enter the United States without...

  15. Optimizing biomass blends for manufacturing molded packaging materials using mycelium

    USDA-ARS?s Scientific Manuscript database

    Polystyrene is one of the most widely used plastics and is commonly produced in three forms: 1) Extruded polystyrene – disposable utensils, CD/DVD cases, yogurt containers, smoke alarm housing, etc.; 2) Expanded polystyrene foam – molded packaging materials and packaging "peanuts"; 3) Extruded polys...

  16. 75 FR 5375 - Hazardous Material; Miscellaneous Packaging Amendments

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-02-02

    ...In this final rule, PHMSA is amending packaging requirements in the Hazardous Materials Regulations to enhance compliance flexibility, improve clarity, and reduce regulatory burdens. Specifically, we are revising several packaging related definitions; adding provisions to allow more flexibility when preparing and transmitting closure instructions, including conditions under which closure instructions may be transmitted electronically; adding a requirement for shippers to retain packaging closure instructions; incorporating new language that will allow for a practicable means of stenciling the ``UN'' symbol on packagings; and clarifying a requirement to document the methodology used when determining whether a change in packaging configuration requires retesting as a new design or may be considered a variation of a previously tested design. This final rule also incorporates requirements for construction, maintenance, and use of Large Packagings.

  17. CORROSION OF LEAD SHIELDING IN NUCLEAR MATERIALS PACKAGES

    SciTech Connect

    Subramanian, K; Kerry Dunn, K; Joseph Murphy, J

    2008-07-18

    Inspection of United States-Department of Energy (US-DOE) model 9975 nuclear materials shipping package revealed corrosion of the lead shielding that was induced by off-gas constituents from organic components in the package. Experiments were performed to determine the corrosion rate of lead when exposed to off-gas or degradation products of these organic materials. The results showed that the room temperature vulcanizing (RTV) sealant was the most corrosive organic species used in the construction of the packaging, followed by polyvinyl acetate (PVAc) glue. Fiberboard material, also used in the construction of the packaging induced corrosion to a much lesser extent than themore » PVAc glue and RTV sealant, and only in the presence of condensed water. The results indicated faster corrosion at temperatures higher than ambient and with condensed water. In light of these corrosion mechanisms, the lead shielding was sheathed in a stainless steel liner to mitigate against corrosion.« less

  18. Materials of Criticality Safety Concern in Waste Packages

    SciTech Connect

    Larson, S.L.; Day, B.A.

    2006-07-01

    10 CFR 71.55 requires in part that the fissile material package remain subcritical when considering 'the most reactive credible configuration consistent with the chemical and physical form of the material'. As waste drums and packages may contain unlimited types of materials, determination of the appropriately bounding moderator and reflector materials to ensure compliance with 71.55 requires a comprehensive analysis. Such an analysis was performed to determine the materials or elements that produce the most reactive configuration with regards to both moderation and reflection of a Pu-239 system. The study was originally performed for the TRUPACT-II shipping package and thus themore » historical fissile mass limit for the package, 325 g Pu-239, was used [1]. Reactivity calculations were performed with the SCALE package to numerically assess the moderation or reflection merits of the materials [2]. Additional details and results are given in SAIC-1322-001 [3]. The development of payload controls utilizing process knowledge to determine the classification of special moderator and/or reflector materials and the associated fissile mass limit is also addressed. (authors)« less

  19. New material options for light-emitting diode packaging

    NASA Astrophysics Data System (ADS)

    Zweben, Carl H.

    2004-06-01

    As light-emitting diode (LED) power levels and chip sizes increase, thermal management and thermal stresses, which affect performance, power conversion efficiency nad lifetime, are becoming increasingly serious problems. Traditional materials have serious deficiencies in meeting requirements for thermal management and minimization of thermal stresses in high-brightness (HB) LED packaging. Copper, the standard material for applications requiring high thermal conductivity, has a coefficient of thermal expansion (CTE) that is much larger than those of ceramics and semiconductor materials, giving rise to thermal stresses when packages are subjected to thermal excursions. Aluminum has a larger CTE than copper. Traditional materials with low CTEs have thermal conductivites that are little or no better than that of aluminum. There are an increasing number of new packaging materials with low, tailorable CTEs and thermal conductivities up to four times those of copper that overcome thise limitations. The ability to tailor material CTE has been used to solve critical warping problems in manufacturing, increasing yield from 5% to over 99%. Advanced materials fall into six categories: monolithic carbonaceous materials, metal matrix compsites, carbon/carbon composites, ceramic matrix composites, polymer matrix composites, and advanced metallic alloys. This paper provides an overview of the state of the art of advanced packaging materials, including their key properties, state of maturity, cost and applications.

  20. Novel silicone materials for LED packaging

    NASA Astrophysics Data System (ADS)

    Norris, Ann W.; Bahadur, Maneesh; Yoshitake, Makoto

    2005-09-01

    Silicone based materials have attracted considerable attention from Light Emitting Diode (LED) manufacturers for use as encapsulants and lenses for many next generation LED device designs. Silicones can function in several roles that include protective lenses, stress relieving encapsulants, mechanical protection and light path materials. The key attributes of silicones that make them attractive materials for high brightness (HB) LEDs include their high transparency in the UV-visible region, controlled refractive index (RI), stable thermo-mechanical properties, and tuneable hardness from soft gels to hard resins. The high current and high operating temperatures of HB-LEDs present a significant materials challenge for traditional organic materials such as epoxies, acrylics and cyclo olefin copolymers (COC) that lack the thermal and molecular stability needed to provide optical clarity and mechanical performance required for next generation devices. In addition, the retention of optical clarity over the lifetime of the device, which involves long term exposure to high flux in the UV-visible wavelength region, is a critical requirement. Silicones have been demonstrated to provide the required stability. This paper will describe recent silicone materials development efforts directed towards providing LED manufacturers with silicone materials solutions for LED device fabrication. Injection molding of novel silicone resin based materials will be discussed as a surmountable challenge for high throughput LED device manufacturing.

  1. Numeric analysis of terahertz wave propagation in familiar packaging materials

    NASA Astrophysics Data System (ADS)

    Zhang, Lihong; Yang, Guang

    2015-10-01

    To assess the potential application of terahertz waves in security examination, the transmission characteristics of terahertz waves in packaging materials should be studied. This paper simulates the propagation of terahertz waves in cloth and paper, studies the changes of shape and position of crest of terahertz waves before and after these materials, and gets the law of these changes, which has potential applications in thickness measurement for the thin insulated materials; gives reflected and transmitted wave of terahertz waves, and computes reflected and transmitted coefficient, indicates the good transmission properties of these materials for terahertz waves, which provides the theoretical basis for the realization of contactless security examination of packaged post, package and people pass the important passageway (such as airport and station).

  2. Functions of Nano-Materials in Food Packaging

    NASA Astrophysics Data System (ADS)

    Yap, Ray Chin Chong; Kwablah, Amegadze Paul Seyram; He, Jiating; Li, Xu

    Food packaging has been changing from bulky and rigid form in the past to different variation of lights and plastic packagings. Regardless of the changes, the packaging must be able to uphold its original function which is to serve as food containment as well as to protect the food from the external environment. Coupled with the increasing consumer’s awareness on food waste, higher standard of living, technological developments are underway to enhance the shelf-life of packed food as well as methods to provide indications of food packaging environment. There are many different indicators for food spoilage, but two commonly found gases in food packaging are oxygen and carbon dioxide. Oxygen is the main mechanism for food spoilage, while carbon dioxide is often used in modified-atmosphere-packaging. There are also different methods of gas scavenging and/or sensing techniques based on different concepts in the literature. In this review, the focus will be on nano-materials, namely titanium dioxide, silica, zeolites and metal organic frameworks. This review is structured in a manner to highlight how each material can be used in both gas scavenging and/or indicators applications. The last part of the review focuses on the approach and some key considerations when integrating nano-materials into the plastic film.

  3. Implications of material selection on the design of packaging machinery.

    PubMed

    Merritt, J P

    2009-01-01

    Material selection has significant implications on the design and cost of horizontal-form-fill-seal packaging machinery. To avoid excessive costs, machine redesigns and project delays, material selection must be reconciled early in the project and revisited throughout the construction of the machine.

  4. New material options for high-power diode laser packaging

    NASA Astrophysics Data System (ADS)

    Zweben, Carl H.

    2004-06-01

    Traditional materials have serious deficiencies in meeting requirements for thermal management and minimization of thermal stresses in high-power laser diode packaging. Copper, the standard material for applications requiring high thermal conductivity, has a coefficient of thermal expansion (CTE) that is much larger than those of ceramics and laser diodes, giving rise to thermal stresses when packages are subjected to thermal excursions. Traditional materials with low CTEs have thermal conductivities that are little or no better than that of aluminum. There are an increasing number of new packaging materials with low, tailorable CTEs and thermal conductivities up to four times those of copper that overcome these limitations. The ability to tailor material CTE has been used to solve critical warping problems in manufacturing, increasing yield from 5% to over 99%. Advanced materials fall into six categories: monolithic carbonaceous materials, metal matrix composites, carbon/carbon composites, ceramic matrix composites, polymer matrix composites, and advanced metallic alloys. This paper provides an overview of the state of the art of advanced packaging materials, including their key properties, state of maturity, using composites to fix manufacturing problems, cost and applications.

  5. Disposability Characteristics of Military Packaging Materials

    DTIC Science & Technology

    1974-03-06

    The procedure generally requires shredding of the waste materials , removal of the 25 percent non - compostable fraction ( metals , glass, plastics...glass, and metal scrap. Finally, conversion is defined as the chemical or biochemical transformation of a waste material into a useful product...actual method of reclamation (pyrolysis or composting) which is used at the base . Off- Base Disposal/Processing Data and Off- Base Disposal / Recycling

  6. Complex-wide representation of material packaged in 3013 containers

    SciTech Connect

    Narlesky, Joshua E.; Peppers, Larry G.; Friday, Gary P.

    2009-06-01

    The DOE sites packaging plutonium oxide materials packaged according to Department of Energy 3013 Standard (DOE-STD-3013) are responsible for ensuring that the materials are represented by one or more samples in the Materials Identification and Surveillance (MIS) program. The sites categorized most of the materials into process groups, and the remaining materials were characterized, based on the prompt gamma analysis results. The sites issued documents to identify the relationships between the materials packaged in 3013 containers and representative materials in the MIS program. These “Represented” documents were then reviewed and concurred with by the MIS Working Group. However, these documentsmore » were developed uniquely at each site and were issued before completion of sample characterization, small-scale experiments, and prompt gamma analysis, which provided more detailed information about the chemical impurities and the behavior of the material in storage. Therefore, based on the most recent data, relationships between the materials packaged in 3013 containers and representative materials in the MIS program been revised. With the prompt gamma analysis completed for Hanford, Rocky Flats, and Savannah River Site 3013 containers, MIS items have been assigned to the 3013 containers for which representation is based on the prompt gamma analysis results. With the revised relationships and the prompt gamma analysis results, a Master “Represented” table has been compiled to document the linkages between each 3013 container packaged to date and its representative MIS items. This table provides an important link between the Integrated Surveillance Program database, which contains information about each 3013 container to the MIS items database, which contains the characterization, prompt gamma data, and storage behavior data from shelf-life experiments for the representative MIS items.« less

  7. Advances in LED packaging and thermal management materials

    NASA Astrophysics Data System (ADS)

    Zweben, Carl

    2008-02-01

    Heat dissipation, thermal stresses and cost are key light-emitting diode (LED) packaging issues. Heat dissipation limits power levels. Thermal stresses affect performance and reliability. Copper, aluminum and conventional polymeric printed circuit boards (PCBs) have high coefficients of thermal expansion, which can cause high thermal stresses. Most traditional low-coefficient-of-thermal-expansion (CTE) materials like tungsten/copper, which date from the mid 20th century, have thermal conductivities that are no better than those of aluminum alloys, about 200 W/m-K. An OIDA LED workshop cited a need for better thermal materials. There are an increasing number of low-CTE materials with thermal conductivities ranging between that of copper (400 W/m-K) and 1700 W/m-K, and many other low-CTE materials with lower thermal conductivities. Some of these materials are low cost. Others have the potential to be low cost in high-volume production. High-thermal-conductivity materials enable higher power levels, potentially reducing the number of required LEDs. Advanced thermal materials can constrain PCB CTE and greatly increase thermal conductivity. This paper reviews traditional packaging materials and advanced thermal management materials. The latter provide the packaging engineer with a greater range of options than in the past. Topics include properties, status, applications, cost, using advanced materials to fix manufacturing problems, and future directions, including composites reinforced with carbon nanotubes and other thermally conductive materials.

  8. Evaluation of Cushioning Materials for Munitions Packaging

    DTIC Science & Technology

    1993-01-01

    usually include data generated from a one foot drop height to a four foot drop height at six inch intervals. At each drop height material thicknesses are...for points .10 through 1.6 were performed using a Hardigg tester (figure 1) modified to obtain seven foot drop heights. Points 4.0 through 10.0 were...of the previous tests to obtain new data on the one, two, and three foot drop test data. To obtain data more quickly and conserve test materials only

  9. CORROSION OF LEAD SHIELDING IN NUCLEAR MATERIALS PACKAGES

    SciTech Connect

    Subramanian, K; Kerry Dunn, K

    2007-11-16

    Inspection of United States-Department of Energy (US-DOE) model 9975 nuclear materials shipping package revealed corrosion of the lead shielding induced by off-gas constituents from organic components in the package. Experiments were performed to determine the corrosion rate of lead when exposed to off-gas or degradation products of these organic materials. The results showed that the room temperature vulcanizing (RTV) sealant was the most corrosive organic species followed by the polyvinyl acetate (PVAc) glue. The fiberboard material induced corrosion to a much lesser extent than the PVAc glue and RTV, and only in the presence of condensed water. The results indicatedmore » faster corrosion at temperatures higher than ambient and with condensed water as expected. A corrosion rate of 0.05 mm/year measured for coupons exposed to the most aggressive conditions was recommended as a conservative estimate for use in package performance calculations.« less

  10. 49 CFR 173.457 - Transportation of fissile material packages-specific requirements.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Transportation of fissile material packages....457 Transportation of fissile material packages—specific requirements. (a) Packages containing fissile...) Fissile material packages and conveyances transporting fissile material packages must satisfy the...

  11. 49 CFR 173.240 - Bulk packaging for certain low hazard solid materials.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... materials. 173.240 Section 173.240 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS REGULATIONS SHIPPERS-GENERAL REQUIREMENTS FOR SHIPMENTS AND PACKAGINGS Bulk Packaging for Hazardous Materials Other...

  12. 49 CFR 173.240 - Bulk packaging for certain low hazard solid materials.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... materials. 173.240 Section 173.240 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS REGULATIONS SHIPPERS-GENERAL REQUIREMENTS FOR SHIPMENTS AND PACKAGINGS Bulk Packaging for Hazardous Materials Other...

  13. 49 CFR 173.240 - Bulk packaging for certain low hazard solid materials.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... materials. 173.240 Section 173.240 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS REGULATIONS SHIPPERS-GENERAL REQUIREMENTS FOR SHIPMENTS AND PACKAGINGS Bulk Packaging for Hazardous Materials Other...

  14. 49 CFR 173.241 - Bulk packagings for certain low hazard liquid and solid materials.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... solid materials. 173.241 Section 173.241 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS REGULATIONS SHIPPERS-GENERAL REQUIREMENTS FOR SHIPMENTS AND PACKAGINGS Bulk Packaging for Hazardous Materials...

  15. 49 CFR 173.241 - Bulk packagings for certain low hazard liquid and solid materials.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... solid materials. 173.241 Section 173.241 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS REGULATIONS SHIPPERS-GENERAL REQUIREMENTS FOR SHIPMENTS AND PACKAGINGS Bulk Packaging for Hazardous Materials...

  16. DEMONSTRATION OF PACKAGING MATERIALS ALTERNATIVES TO EXPANDED POLYSTYRENE

    EPA Science Inventory

    This report represents the second demonstration of cleaner technologies to support the goals of the 33/50 Program under the EPA Cooperative Agreement No. CR-821848. The report presents assessment results of alternative packaging materials which could potentially replace expanded...

  17. 19 CFR 10.461 - Retail packaging materials and containers.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 19 Customs Duties 1 2011-04-01 2011-04-01 false Retail packaging materials and containers. 10.461 Section 10.461 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY ARTICLES CONDITIONALLY FREE, SUBJECT TO A REDUCED RATE, ETC. United States-Chile...

  18. 19 CFR 10.461 - Retail packaging materials and containers.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Retail packaging materials and containers. 10.461 Section 10.461 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY ARTICLES CONDITIONALLY FREE, SUBJECT TO A REDUCED RATE, ETC. United States-Chile...

  19. 49 CFR 173.21 - Forbidden materials and packages.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... generate a dangerous evolution of heat, unless packaged in a manner which precludes such an occurrence. (d... container, or overpack with another material, the mixing of which is likely to cause a dangerous evolution...) of 50 °C (122 °F) or less, or polymerize at a temperature of 54 °C (130 °F) or less with an evolution...

  20. 49 CFR 173.21 - Forbidden materials and packages.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... generate a dangerous evolution of heat, unless packaged in a manner which precludes such an occurrence. (d... container, or overpack with another material, the mixing of which is likely to cause a dangerous evolution...) of 50 °C (122 °F) or less, or polymerize at a temperature of 54 °C (130 °F) or less with an evolution...

  1. 49 CFR 173.21 - Forbidden materials and packages.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... generate a dangerous evolution of heat, unless packaged in a manner which precludes such an occurrence. (d... container, or overpack with another material, the mixing of which is likely to cause a dangerous evolution...) of 50 °C (122 °F) or less, or polymerize at a temperature of 54 °C (130 °F) or less with an evolution...

  2. 49 CFR 173.21 - Forbidden materials and packages.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... generate a dangerous evolution of heat, unless packaged in a manner which precludes such an occurrence. (d... container, or overpack with another material, the mixing of which is likely to cause a dangerous evolution...) of 50 °C (122 °F) or less, or polymerize at a temperature of 54 °C (130 °F) or less with an evolution...

  3. 49 CFR 173.21 - Forbidden materials and packages.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... generate a dangerous evolution of heat, unless packaged in a manner which precludes such an occurrence. (d... container, or overpack with another material, the mixing of which is likely to cause a dangerous evolution...) of 50 °C (122 °F) or less, or polymerize at a temperature of 54 °C (130 °F) or less with an evolution...

  4. 19 CFR 10.922 - Retail packaging materials and containers.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 19 Customs Duties 1 2012-04-01 2012-04-01 false Retail packaging materials and containers. 10.922 Section 10.922 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY ARTICLES CONDITIONALLY FREE, SUBJECT TO A REDUCED RATE, ETC. United States-Peru...

  5. 19 CFR 10.922 - Retail packaging materials and containers.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 19 Customs Duties 1 2013-04-01 2013-04-01 false Retail packaging materials and containers. 10.922 Section 10.922 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY ARTICLES CONDITIONALLY FREE, SUBJECT TO A REDUCED RATE, ETC. United States-Peru...

  6. 19 CFR 10.922 - Retail packaging materials and containers.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 19 Customs Duties 1 2014-04-01 2014-04-01 false Retail packaging materials and containers. 10.922 Section 10.922 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY ARTICLES CONDITIONALLY FREE, SUBJECT TO A REDUCED RATE, ETC. United States-Peru...

  7. Advanced Packaging Materials and Techniques for High Power TR Module: Standard Flight vs. Advanced Packaging

    NASA Technical Reports Server (NTRS)

    Hoffman, James Patrick; Del Castillo, Linda; Miller, Jennifer; Jenabi, Masud; Hunter, Donald; Birur, Gajanana

    2011-01-01

    The higher output power densities required of modern radar architectures, such as the proposed DESDynI [Deformation, Ecosystem Structure, and Dynamics of Ice] SAR [Synthetic Aperture Radar] Instrument (or DSI) require increasingly dense high power electronics. To enable these higher power densities, while maintaining or even improving hardware reliability, requires advances in integrating advanced thermal packaging technologies into radar transmit/receive (TR) modules. New materials and techniques have been studied and compared to standard technologies.

  8. Materials, design and processing of air encapsulated MEMS packaging

    NASA Astrophysics Data System (ADS)

    Fritz, Nathan T.

    This work uses a three-dimensional air cavity technology to improve the fabrication, and functionality of microelectronics devices, performance of on-board transmission lines, and packaging of micro-electromechanical systems (MEMS). The air cavity process makes use of the decomposition of a patterned sacrificial polymer followed by the diffusion of its by-products through a curing polymer overcoat to obtain the embedded air structure. Applications and research of air cavities have focused on simple designs that concentrate on the size and functionality of the particular device. However, a lack of guidelines for fabrication, materials used, and structural design has led to mechanical stability issues and processing refinements. This work investigates improved air gap cavities for use in MEMS packaging processes, resulting in fewer fabrication flaws and lower cost. The identification of new materials, such as novel photo-definable organic/inorganic hybrid polymers, was studied for increased strength and rigidity due to their glass-like structure. A novel epoxy polyhedral oligomeric silsesquioxane (POSS) material was investigated and characterized for use as a photodefineable, permanent dielectrics with improved mechanical properties. The POSS material improved the air gap fabrication because it served as a high-selectivity etch mask for patterning sacrificial materials as well as a cavity overcoat material with improved rigidity. An investigation of overcoat thickness and decomposition kinetics provided a fundamental understanding of the properties that impart mechanical stability to cavities of different shape and volume. Metallization of the cavities was investigated so as to provide hermetic sealing and improved cavity strength. The improved air cavity, wafer-level packages were tested using resonator-type devices and chip-level lead frame packaging. The air cavity package was molded under traditional lead frame molding pressures and tested for mechanical

  9. Demonstration of packaging materials alternatives to expanded polystyrene. Final report

    SciTech Connect

    Menke, D.M.

    1998-04-01

    The report presents information on the environmental, economical, and performance characteristics of alternative packaging materials. Three alternative cushioning materials were identified for evaluation within this research; starch-based foam planks, layered corrugated pads, and recycled polyethylene foam. Through some have been used as cushioning materials for some time, these materials are termed alternative because each offers unique features beyond their cushioning capabilities. These unique features include their manufacture from recycled materials, biodegradability, water solubility, recyclability, and reusability. The properties and cushioning characteristics of expanded polystyrene (EPS) represent the baseline for this research; evaluation results for each material are compared against thosemore » of EPS. Technical, environmental, and economic evaluations were completed to assess various characteristics and parameters concerning the cushioning materials.« less

  10. 10 CFR 835.405 - Receipt of packages containing radioactive material.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 4 2011-01-01 2011-01-01 false Receipt of packages containing radioactive material. 835... Individuals and Areas § 835.405 Receipt of packages containing radioactive material. (a) If packages...) Take possession of the package when the carrier offers it for delivery; or (2) Receive notification as...

  11. Extending the utility of a radioactive material package

    SciTech Connect

    Abramczyk, G.; Nathan, S.; Loftin, B.

    2015-06-04

    Once a package has been certified for the transportation of DOT Hazard Class 7 – Radioactive Material in compliance with the requirements of 10 CFR 71, it is often most economical to extend its utility through the addition of content-specific configuration control features or the addition of shielding materials. The SRNL Model 9977 Package’s authorization was expanded from its original single to twenty contents in this manner; and most recently, the 9977 was evaluated for a high-gamma source content. This paper discusses the need for and the proposed shielding modifications to the package for extending the utility of the packagemore » for this purpose.« less

  12. RECERTIFICATION OF THE MODEL 9977 RADIOACTIVE MATERIAL PACKAGING

    SciTech Connect

    Abramczyk, G.; Bellamy, S.; Loftin, B.

    2013-06-05

    The Model 9977 Packaging was initially issued a Certificate of Compliance (CoC) by the Department of Energy’s Office of Environmental Management (DOE-EM) for the transportation of radioactive material (RAM) in the Fall of 2007. This first CoC was for a single radioactive material and two packing configurations. In the five years since that time, seven Addendums have been written to the Safety Analysis Report for Packaging (SARP) and five Letter Amendments have been written that have authorized either new RAM contents or packing configurations, or both. This paper will discuss the process of updating the 9977 SARP to include allmore » the contents and configurations, including the addition of a new content, and its submittal for recertification.« less

  13. Thermal interface material characterization for cryogenic electronic packaging solutions

    NASA Astrophysics Data System (ADS)

    Dillon, A.; McCusker, K.; Van Dyke, J.; Isler, B.; Christiansen, M.

    2017-12-01

    As applications of superconducting logic technologies continue to grow, the need for efficient and reliable cryogenic packaging becomes crucial to development and testing. A trade study of materials was done to develop a practical understanding of the properties of interface materials around 4 K. While literature exists for varying interface tests, discrepancies are found in the reported performance of different materials and in the ranges of applied force in which they are optimal. In considering applications extending from top cooling a silicon chip to clamping a heat sink, a range of forces from approximately 44 N to approximately 445 N was chosen for testing different interface materials. For each range of forces a single material was identified to optimize the thermal conductance of the joint. Of the tested interfaces, indium foil clamped at approximately 445 N showed the highest thermal conductance. Results are presented from these characterizations and useful methodologies for efficient testing are defined.

  14. Materials for high-density electronic packaging and interconnection

    NASA Technical Reports Server (NTRS)

    1990-01-01

    Electronic packaging and interconnections are the elements that today limit the ultimate performance of advanced electronic systems. Materials in use today and those becoming available are critically examined to ascertain what actions are needed for U.S. industry to compete favorably in the world market for advanced electronics. Materials and processes are discussed in terms of the final properties achievable and systems design compatibility. Weak points in the domestic industrial capability, including technical, industrial philosophy, and political, are identified. Recommendations are presented for actions that could help U.S. industry regain its former leadership position in advanced semiconductor systems production.

  15. 49 CFR 172.316 - Packagings containing materials classed as ORM-D.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Packagings containing materials classed as ORM-D... INFORMATION, TRAINING REQUIREMENTS, AND SECURITY PLANS Marking § 172.316 Packagings containing materials classed as ORM-D. (a) Each non-bulk packaging containing a material classed as ORM-D must be marked on at...

  16. 48 CFR 552.211-89 - Non-manufactured wood packaging material for export.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... International Plant Protection Convention (IPPC) “Guidelines for Regulating Wood Packaging Material in... packaging material for export. 552.211-89 Section 552.211-89 Federal Acquisition Regulations System GENERAL... and Clauses 552.211-89 Non-manufactured wood packaging material for export. As prescribed in 511.204(b...

  17. Studies on dermestid beetle: materials interactions. II. Tests for survival with insulating and packaging materials

    SciTech Connect

    Brannen, J.P.; Gennaro, A.L.; Salb, T.J.

    1973-11-01

    Samples of various packaging and electrical insulating materials were exposed to larvae of Anthrenus flavipes and Dermestes maculatus under conditions of controlled light, temperature, and relative humidity. Of the materials tested, the only population survival was on vulcanized curled hair by Anthrenus flavipes. Starvation and cannibalistic characteristics of the two species were analyzed. (auth)

  18. 49 CFR 173.419 - Authorized packages-oxidizing Class 7 (radioactive) materials.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... fissile; (ii) Packed in inside packagings of glass, metal or compatible plastic; and (iii) Cushioned with a material that will not react with the contents; and (2) The outside packaging is made of wood... SHIPPERS-GENERAL REQUIREMENTS FOR SHIPMENTS AND PACKAGINGS Class 7 (Radioactive) Materials § 173.419...

  19. 49 CFR 173.419 - Authorized packages-oxidizing Class 7 (radioactive) materials.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... fissile; (ii) Packed in inside packagings of glass, metal or compatible plastic; and (iii) Cushioned with a material that will not react with the contents; and (2) The outside packaging is made of wood... SHIPPERS-GENERAL REQUIREMENTS FOR SHIPMENTS AND PACKAGINGS Class 7 (Radioactive) Materials § 173.419...

  20. 49 CFR 173.419 - Authorized packages-oxidizing Class 7 (radioactive) materials.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... fissile; (ii) Packed in inside packagings of glass, metal or compatible plastic; and (iii) Cushioned with a material that will not react with the contents; and (2) The outside packaging is made of wood... SHIPPERS-GENERAL REQUIREMENTS FOR SHIPMENTS AND PACKAGINGS Class 7 (Radioactive) Materials § 173.419...

  1. 49 CFR 173.418 - Authorized packages-pyrophoric Class 7 (radioactive) materials.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Authorized packages-pyrophoric Class 7....418 Authorized packages—pyrophoric Class 7 (radioactive) materials. Pyrophoric Class 7 (radioactive... package must be transported in DOT Specification 7A packagings constructed of materials that will not...

  2. 49 CFR 173.418 - Authorized packages-pyrophoric Class 7 (radioactive) materials.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 2 2011-10-01 2011-10-01 false Authorized packages-pyrophoric Class 7....418 Authorized packages—pyrophoric Class 7 (radioactive) materials. Pyrophoric Class 7 (radioactive... package must be transported in DOT Specification 7A packagings constructed of materials that will not...

  3. 77 FR 14445 - Leakage Tests on Packages for Shipment of Radioactive Material

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-09

    ... NUCLEAR REGULATORY COMMISSION [NRC-2011-0045] Leakage Tests on Packages for Shipment of..., ``Leakage Tests on Packages for Radioactive Material.'' ADDRESSES: You can access publicly available... Materials--Leakage Tests on Packages for Shipment'' approved February 1998. The NRC staff developed and...

  4. Molecularly imprinted hydrogels as functional active packaging materials.

    PubMed

    Benito-Peña, Elena; González-Vallejo, Victoria; Rico-Yuste, Alberto; Barbosa-Pereira, Letricia; Cruz, José Manuel; Bilbao, Ainhoa; Alvarez-Lorenzo, Carmen; Moreno-Bondi, María Cruz

    2016-01-01

    This paper describes the synthesis of novel molecularly imprinted hydrogels (MIHs) for the natural antioxidant ferulic acid (FA), and their application as packaging materials to prevent lipid oxidation of butter. A library of MIHs was synthesized using a synthetic surrogate of FA, 3-(4-hydroxy-3-methoxyphenyl)propionic acid (HFA), as template molecule, ethyleneglycol dimethacrylate (EDMA) as cross-linker, and 1-allylpiperazine (1-ALPP) or 2-(dimethylamino)ethyl methacrylate (DMAEMA), in combination with 2-hydroxyethyl methacrylate (HEMA) as functional monomers, at different molar concentrations. The DMAEMA/HEMA-based MIHs showed the greatest FA loading capacity, while the 1-ALLP/HEMA-based polymers exhibited the highest imprinting effect. During cold storage, FA-loaded MIHs protected butter from oxidation and led to TBARs values that were approximately half those of butter stored without protection and 25% less than those recorded for butter covered with hydrogels without FA, potentially extending the shelf life of butter. Active packaging is a new field of application for MIHs with great potential in the food industry. Copyright © 2015 Elsevier Ltd. All rights reserved.

  5. 49 CFR 173.428 - Empty Class 7 (radioactive) materials packaging.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 2 2013-10-01 2013-10-01 false Empty Class 7 (radioactive) materials packaging... HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS REGULATIONS SHIPPERS-GENERAL REQUIREMENTS FOR SHIPMENTS AND PACKAGINGS Class 7 (Radioactive) Materials § 173.428 Empty...

  6. 49 CFR 173.428 - Empty Class 7 (radioactive) materials packaging.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 2 2014-10-01 2014-10-01 false Empty Class 7 (radioactive) materials packaging... HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS REGULATIONS SHIPPERS-GENERAL REQUIREMENTS FOR SHIPMENTS AND PACKAGINGS Class 7 (Radioactive) Materials § 173.428 Empty...

  7. Food packaging materials and radiation processing of food: A brief review

    NASA Astrophysics Data System (ADS)

    Chuaqui-Offermanns, N.

    Food is usually packaged to prevent microbial contamination and spoilage. Ionizing radiation can be applied to food-packaging materials in two ways: (i) sterilization of packaging materials for aseptic packaging, and (ii) radiation processing of prepackaged food. In aseptic packaging, a sterile package is filled with a sterile product in a microbiologically controlled environment. In irradiation of prepackaged food, the food and the packaging material are irradiated simultaneously. For both applications, the radiation stability of the packaging material is a key consideration if the technology is to be used successfully. To demonstrate the radiation stability of the packaging material, it must be shown that irradiation does not significantly alter the physical and chemical properties of the material. The irradiated material must protect the food from environmental contamination while maintaining its organoleptic and toxicological properties. Single-layer plastics cannot meet the requirements of either application. Multilayered structures produced by coextrusion would likely satisfy the demands of radiation processing prepackaged food. In aseptic packaging, the package is irradiated prior to filling, making demands on toxicological safety less stringent. Therefore, multilayered structures produced by coextrusion, lamination or co-injection moulding could satisfy the requirements.

  8. Life cycle Analysis of Aluminum Foil Packaging Material.

    PubMed

    El Sebaie, Olfat; Ahmed, Manal; Hussein, Ahmed; El Sharkawy, Fahmay; Samy, Manal

    2006-01-01

    A fundamental tent of life cycle analysis (LCA) is that every material product must become a waste. To choose the greener products, it is necessary to take into account their environmental impacts from cradle to grave. LCA is the tool used to measure environmental improvements. Aluminum (Al) is the third most common element found in the earth's crust, after oxygen and silicon. Al packaging foil was chosen as the material for the study with its life cycle perspective at Alexandria. The Al packaging produced from virgin and recycled Al was investigated through life cycle stages in these two production processes; primary and secondary. The aim of this study is to evaluate the environmental impact of aluminum packaging process by using life cycle analysis of its product from two different starting raw materials (virgin and recycled aluminum). The input and output materials, energy, water, natural gas consumptions, and solid waste uses in the foil industry had been analyzed in order to identify those with significant contribution to the total environmental impacts. From the survey done on the two life cycles, it was found that in environmental terms, the most important emissions from the primary process are the emission of CO(2) and perfluorocarbon (PFC) gases, which produce the greenhouse effect, and SO(2) as well as the emission of fluorides and polyaromatic hydrocarbons (PAH compounds), which are toxic to humans and the environment. On over all material balance, it was found that the ingot shares by 45% of the feed to the casthouse furnaces at Egyptian Copper Work (ECW), net production of the casthouse is 43.76% and the yield of rotary dross furnace (RDF) is 28.8%. The net production of the foil unit represents 35% of the total input to the unit. By comparing the two life cycles, it is obvious that, for water consumption, 93.5% is used in the primary cycle, while 6.5% is used in the secondary cycle. For electricity consumption, 99.3% is used in the primary cycle

  9. Development of antimicrobial active packaging materials based on gluten proteins.

    PubMed

    Gómez-Heincke, Diana; Martínez, Inmaculada; Partal, Pedro; Guerrero, Antonio; Gallegos, Críspulo

    2016-08-01

    The incorporation of natural biocide agents into protein-based bioplastics, a source of biodegradable polymeric materials, manufactured by a thermo-mechanical method is a way to contribute to a sustainable food packaging industry. This study assesses the antimicrobial activity of 10 different biocides incorporated into wheat gluten-based bioplastics. The effect that formulation, processing, and further thermal treatments exert on the thermo-mechanical properties, water absorption characteristics and rheological behaviour of these materials is also studied. Bioplastics containing six of the 10 examined bioactive agents have demonstrated suitable antimicrobial activity at 37 °C after their incorporation into the bioplastic. Moreover, the essential oils are able to create an antimicrobial atmosphere within a Petri dish. Depending on the selected biocide, its addition may alter the bioplastics protein network in a different extent, which leads to materials exhibiting less water uptake and different rheological and thermo-mechanical behaviours. © 2015 Society of Chemical Industry. © 2015 Society of Chemical Industry.

  10. 10 CFR 71.59 - Standards for arrays of fissile material packages.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Standards for arrays of fissile material packages. 71.59 Section 71.59 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) PACKAGING AND TRANSPORTATION OF RADIOACTIVE.... The value of the CSI may be zero provided that an unlimited number of packages are subcritical, such...

  11. 49 CFR 173.419 - Authorized packages-oxidizing Class 7 (radioactive) materials.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Authorized packages-oxidizing Class 7 (radioactive... Authorized packages—oxidizing Class 7 (radioactive) materials. (a) An oxidizing Class 7 (radioactive... exceeding an A2 per package, in a DOT Specification 7A package provided that— (1) The contents are: (i) Not...

  12. 49 CFR 173.419 - Authorized packages-oxidizing Class 7 (radioactive) materials.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 2 2011-10-01 2011-10-01 false Authorized packages-oxidizing Class 7 (radioactive... Authorized packages—oxidizing Class 7 (radioactive) materials. (a) An oxidizing Class 7 (radioactive... exceeding an A2 per package, in a DOT Specification 7A package provided that— (1) The contents are: (i) Not...

  13. Packaging Materials and Design for Improved PV Module Reliability

    SciTech Connect

    Jorgensen, G.; Terwilliger, K.; Kempe, M.

    2005-01-01

    A number of candidate alternative encapsulant and soft backsheet materials have been evaluated in terms of their suitability for photovoltaic (PV) module packaging applications. Relevant properties, including peel strength as a function of damp heat exposure and permeability, have been measured. Based on these tests, promising new encapsulants with adhesion-promoting primers have been identified that result in improved properties. Test results for backsheets provided by industry and prepared at the National Renewable Energy Laboratory (NREL) have suggested strategies to achieve significantly improved products. The ability of glass/glass and glass/breathable backsheet constructions laminated with various encapsulant and/or edge seal materials tomore » protect thin-film aluminum coatings deposited onto glass substrates was assessed. Glass/glass laminate constructions can trap harmful compounds that catalyze moisture-driven corrosion of the aluminum. Constructions with breathable backsheets allow higher rates of moisture ingress, but also allow egress of deleterious substances that can result in decreased corrosion.« less

  14. Materials in Manufacturing and Packaging Systems as Sources of Elemental Impurities in Packaged Drug Products: A Literature Review.

    PubMed

    Jenke, Dennis R; Stults, Cheryl L M; Paskiet, Diane M; Ball, Douglas J; Nagao, Lee M

    Elemental impurities in drug products can arise from a number of different sources and via a number of different means, including the active pharmaceutical ingredient, excipients, the vehicle, and leaching of elemental entities that are present in the drug product's manufacturing or packaging systems. Thus, knowledge about the presence, level, and likelihood of leaching of elemental entities in manufacturing and packaging systems is relevant to understanding how these systems contribute to a drug product's total elemental impurity burden. To that end, a joint team from the Extractables and Leachables Safety Information Exchange (ELSIE) Consortium and the International Pharmaceutical Aerosol Consortium on Regulation and Science (IPAC-RS) has conducted a review of the available literature on elemental entities in pharmaceutically relevant polymers and the presence of these elemental entities in material extracts and/or drug products. This review article contains the information compiled from the available body of literature and considers two questions: (1) What elemental entities are present in the relevant polymers and materials and at what levels are they present? (2) To what extent are these elemental entities leached from these materials under conditions relevant to the manufacturing and storage/distribution of solution drug products? Conclusions drawn from the compiled data are as follows: (1) Elemental entities are present in the materials used to construct packaging and manufacturing systems as these materials either contain these elemental entities as additives or are exposed to elemental entities during their production. (2) Unless the elemental entities are parts of the materials themselves (for example, SiO 2 in glass) or intentionally added to the materials (for example, metal stearates in polymers), their incidental amounts in the materials are generally low. (3) When elemental entities are present in materials and systems, generally only a very small

  15. Multi-layered Poly-Dimethylsiloxane As A Non-Hermetic Packaging Material For Medical MEMS

    PubMed Central

    Lachhman, S.; Zorman, C.A.; Ko, W.H.

    2012-01-01

    Poly-dimethylsiloxane (PDMS) is an attractive material for packaging implantable biomedical microdevices owing to its biocompatibility, ease in application, and bio-friendly mechanical properties. Unfortunately, devices encapsulated by PDMS lack the longevity for use in chronic implant applications due to defect-related moisture penetration through the packaging layer. This paper describes an effort to improve the performance of PDMS as packaging material by constructing the encapsulant from multiple, thin layers of PDMS as a part of a polymeric multi-material package PMID:23366225

  16. 49 CFR 173.417 - Authorized fissile materials packages.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... accordance with United States Enrichment Corporation Report No. USEC-651 or ANSI N14.1 (IBR, see § 171.7 of... and packaging criteria must be in accordance with United States Enrichment Corporation Report No. USEC... C; (ii) Any Type AF, Type B(U)F, or Type B(M)F packaging that meets the applicable standards for...

  17. 49 CFR 173.417 - Authorized fissile materials packages.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... accordance with United States Enrichment Corporation Report No. USEC-651 or ANSI N14.1 (IBR, see § 171.7 of... and packaging criteria must be in accordance with United States Enrichment Corporation Report No. USEC... C; (ii) Any Type AF, Type B(U)F, or Type B(M)F packaging that meets the applicable standards for...

  18. Quality and safety aspects of meat products as affected by various physical manipulations of packaging materials.

    PubMed

    Lee, Keun Taik

    2010-09-01

    This article explores the effects of physically manipulated packaging materials on the quality and safety of meat products. Recently, innovative measures for improving quality and extending the shelf-life of packaged meat products have been developed, utilizing technologies including barrier film, active packaging, nanotechnology, microperforation, irradiation, plasma and far-infrared ray (FIR) treatments. Despite these developments, each technology has peculiar drawbacks which will need to be addressed by meat scientists in the future. To develop successful meat packaging systems, key product characteristics affecting stability, environmental conditions during storage until consumption, and consumers' packaging expectations must all be taken into consideration. Furthermore, the safety issues related to packaging materials must also be taken into account when processing, packaging and storing meat products.

  19. THERMAL EVALUATION OF DRUM TYPE RADIOACTIVE MATERIAL PACKAGING ARRAYS IN STORAGE

    SciTech Connect

    Gupta, N

    2009-04-27

    Drum type packages are routinely used to transport radioactive material (RAM) in the U.S. Department of Energy (DOE) complex. These packages are designed to meet the federal regulations described in 10 CFR 71.[1] In recent years, there has been a greater need to use these packagings to store the excess fissile material, especially plutonium for long term storage. While the design requirements for safe transportation of these packagings are well defined, the requirements for safe long term storage are not well established. Since the RAM contents in the packagings produce decay heat, it is important that they are stored carefullymore » to prevent overheating of the containment vessel (CV) seals to prevent any leakage and the impact limiter to maintain the package structural integrity. This paper analyzes different storage arrays for a typical 9977 packaging for thermal considerations and makes recommendations for their safe storage under normal operating conditions.« less

  20. 49 CFR 173.240 - Bulk packaging for certain low hazard solid materials.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Bulk packaging for certain low hazard solid materials. 173.240 Section 173.240 Transportation Other Regulations Relating to Transportation PIPELINE AND... Than Class 1 and Class 7 § 173.240 Bulk packaging for certain low hazard solid materials. When § 172...

  1. 49 CFR 173.240 - Bulk packaging for certain low hazard solid materials.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 2 2011-10-01 2011-10-01 false Bulk packaging for certain low hazard solid materials. 173.240 Section 173.240 Transportation Other Regulations Relating to Transportation PIPELINE AND... Than Class 1 and Class 7 § 173.240 Bulk packaging for certain low hazard solid materials. When § 172...

  2. 49 CFR 173.247 - Bulk packaging for certain elevated temperature materials.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 2 2012-10-01 2012-10-01 false Bulk packaging for certain elevated temperature... Than Class 1 and Class 7 § 173.247 Bulk packaging for certain elevated temperature materials. When... constructed of carbon steel which is in elevated temperature material service is excepted from § 178.345-7(d...

  3. 49 CFR 173.247 - Bulk packaging for certain elevated temperature materials.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 2 2011-10-01 2011-10-01 false Bulk packaging for certain elevated temperature... Than Class 1 and Class 7 § 173.247 Bulk packaging for certain elevated temperature materials. When... constructed of carbon steel which is in elevated temperature material service is excepted from § 178.345-7(d...

  4. 49 CFR 173.247 - Bulk packaging for certain elevated temperature materials.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 2 2013-10-01 2013-10-01 false Bulk packaging for certain elevated temperature... Than Class 1 and Class 7 § 173.247 Bulk packaging for certain elevated temperature materials. When... constructed of carbon steel which is in elevated temperature material service is excepted from § 178.345-7(d...

  5. 49 CFR 173.247 - Bulk packaging for certain elevated temperature materials.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 2 2014-10-01 2014-10-01 false Bulk packaging for certain elevated temperature... Than Class 1 and Class 7 § 173.247 Bulk packaging for certain elevated temperature materials. When... constructed of carbon steel which is in elevated temperature material service is excepted from § 178.345-7(d...

  6. PATRAM '83: 7th International Symposium on Packaging and Transportation of Radioactive Materials, summaries

    NASA Astrophysics Data System (ADS)

    Papers were presented at the following sessions: international regulations; materials, fracture toughness of ferritic steels; risk analysis techniques; storage in packagings; packaging design considerations; monolithic cast iron casks; risk analysis; facility/transportation system interface; research and development programs; UF6 packagings; national regulations; transportation operations and traffic; containment, seals, and leakage; radiation risk experience; emergency response; structural modeling and testing; transportation system planning; institutional issues and public response; packaging systems; thermal analysis and testing; systems analysis; structural analyses; quality assurance; packaging and transportation systems; physical protection; criticality and shielding; transportation operations and experience; standards; shock absorber technology; and information and training for regulatory compliance. Individual summaries are title listed.

  7. Packaging material and flexible medical tubing containing thermally exfoliated graphite oxide

    NASA Technical Reports Server (NTRS)

    Prud'homme, Robert K. (Inventor); Aksay, Ilhan A. (Inventor)

    2011-01-01

    A packaging material or flexible medical tubing containing a modified graphite oxide material, which is a thermally exfoliated graphite oxide with a surface area of from about 300 m.sup.2/g to 2600 m.sup.2/g.

  8. Material flow analysis for an industry - A case study in packaging

    USGS Publications Warehouse

    Amey, E.B.; Sandgren, K.

    1996-01-01

    The basic materials used in packaging are glass, metals (primarily aluminum and steel), an ever-growing range of plastics, paper and paperboard, wood, textiles for bags, and miscellaneous other materials (such as glues, inks, and other supplies). They are fabricated into rigid, semi-rigid, or flexible containers. The most common forms of these containers include cans, drums, bottles, cartons, boxes, bags, pouches, and wraps. Packaging products are, for the most part, low cost, bulky products that are manufactured close to their customers. There is virtually no import or export of packaging products. A material flow analysis can be developed that looks at all inputs to an industrial sector, inventories the losses in processing, and tracks the fate of the material after its useful life. An example is presented that identifies the material inputs to the packaging industry, and addresses the ultimate fate of the materials used. ?? 1996 International Association for Mathematical Geology.

  9. Effect of Wheat Flour Packaging Materials on Infestation by Lasioderma serricorne (F.).

    PubMed

    Lü, Jianhua; Ma, Dan

    2015-05-01

    The ability of the cigarette beetle, Lasioderma serricorne (F.) (Coleoptera: Anobiidae), to infest wheat flour under packaged and unpackaged conditions was investigated in the laboratory at 27 ± 2°C and 75% ± 5% relative humidity. Five common packaging materials, namely, vacuum plastic bags, kraft paper bags, nonwoven cloth bags, aluminum foil bags, and woven plastic bags, were investigated. Adults and eggs of L. serricorne were released on different packaged wheat flour or on unpackaged wheat flour, and infestation levels (number of live adults and larvae) were determined after 45 days. When adults were released on wheat flour, the infestation degree varied depending on the package materials. The highest infestation was observed in refined wheat flour packaged in nonwoven cloth bags. With wheat flour packaged in kraft paper bags exposed to adults or eggs, there was no insect infestation or insect infestation was negligible (mean population, <1.3). With wheat flour packaged in aluminum foil bags and vacuum plastic bags exposed to adults or eggs, there was no insect infestation. Damage to the packaging materials along the folds or edges was found in nonwoven cloth bags and woven plastic bags. Therefore, both aluminum foil and plastic bags had the greatest resistance to package invasion by L. serricorne.

  10. Migration and sensory changes of packaging materials caused by ionising radiation

    NASA Astrophysics Data System (ADS)

    Welle, Frank; Mauer, Alexandra; Franz, Roland

    2002-03-01

    Irradiation of packaging materials—in most cases plastics—generally lead to a formation of free radicals and ions, with secondary effects such as cross-linking as well as oxidative chain scission. These effects result in a formation of volatile radiolysis products which may induce off-odours in the polymers and may change the migration characteristics of packaging materials. Irradiation affect also polymer additives which change the specific migration behaviour of polymer additives and additive related decomposition products. Migration and sensory changes of pre-sterilised packaging materials have consequences on the quality of packaged goods and consumer's safety. Therefore, migration and sensory properties of packaging materials have specific regulations. Within this paper the effects of the formation of radiolysis products on overall migration, specific migration of food additives or radiolysis products as well as on sensory changes are discussed in view of current European food law.

  11. 49 CFR 173.241 - Bulk packagings for certain low hazard liquid and solid materials.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Bulk packagings for certain low hazard liquid and solid materials. 173.241 Section 173.241 Transportation Other Regulations Relating to Transportation... Other Than Class 1 and Class 7 § 173.241 Bulk packagings for certain low hazard liquid and solid...

  12. 49 CFR 173.241 - Bulk packagings for certain low hazard liquid and solid materials.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 2 2011-10-01 2011-10-01 false Bulk packagings for certain low hazard liquid and solid materials. 173.241 Section 173.241 Transportation Other Regulations Relating to Transportation... Other Than Class 1 and Class 7 § 173.241 Bulk packagings for certain low hazard liquid and solid...

  13. 10 CFR 71.59 - Standards for arrays of fissile material packages.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 2 2013-01-01 2013-01-01 false Standards for arrays of fissile material packages. 71.59 Section 71.59 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) PACKAGING AND TRANSPORTATION OF RADIOACTIVE... moderation; and (3) The value of “N” cannot be less than 0.5. (b) The CSI must be determined by dividing the...

  14. 10 CFR 71.59 - Standards for arrays of fissile material packages.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 2 2014-01-01 2014-01-01 false Standards for arrays of fissile material packages. 71.59 Section 71.59 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) PACKAGING AND TRANSPORTATION OF RADIOACTIVE... moderation; and (3) The value of “N” cannot be less than 0.5. (b) The CSI must be determined by dividing the...

  15. 10 CFR 71.59 - Standards for arrays of fissile material packages.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 2 2011-01-01 2011-01-01 false Standards for arrays of fissile material packages. 71.59 Section 71.59 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) PACKAGING AND TRANSPORTATION OF RADIOACTIVE... moderation; and (3) The value of “N” cannot be less than 0.5. (b) The CSI must be determined by dividing the...

  16. Active packaging materials from Poly(Lactic Acid)and Pectin composites

    USDA-ARS?s Scientific Manuscript database

    Active packaging of foods is receiving considerable attention from the food industry and food researchers. The ability to wrap foods in packaging materials that can provide additional functions, such as retaining freshness or preventing spoilage and pathogen growth, would be very important for the f...

  17. Evaluation of select blends of cotton byproducts in the manufacture of biodegradable packaging material

    USDA-ARS?s Scientific Manuscript database

    Polystyrene is one of the most widely used plastics in the manufacture of packaging materials. Extruded polystyrene foam is commonly sold under the trademark name of StyrofoamTM. Polystyrene packaging is a multibillion dollar a year industry. Since polystyrene is non-biodegradable, a biodegradable m...

  18. Optimization of biomass blends in the manufacture of molded packaging materials produced using fungal mycelium

    USDA-ARS?s Scientific Manuscript database

    Polystyrene is one of the most widely used plastics and is commonly produced in three forms: 1) Extruded polystyrene – disposable utensils, CD/DVD cases, yogurt containers, smoke alarm housing, etc.; 2) Expanded polystyrene foam – molded packaging materials and packaging "peanuts"; 3) Extruded polys...

  19. Influence of factors on release of antimicrobials from antimicrobial packaging materials.

    PubMed

    Wu, Yu-Mei; Wang, Zhi-Wei; Hu, Chang-Ying; Nerín, Cristina

    2016-10-13

    Antimicrobial packaging materials (films or coatings) (APMs) have aroused great interest among the scientists or the experts specialized in material science, food science, packaging engineering, biology and chemistry. APMs have been used to package the food, such as dairy products, poultry, meat (e.g., beef), salmon muscle, pastry dough, fresh pasta, bakery products, fruits, vegetables and beverages. Some materials have been already commercialized. The ability of APMs to extend the shelf-life of the food depends on the release rate of the antimicrobials (AMs) from the materials to the food. The optimum rate is defined as target release rate (TRR). To achieve TRR, the influencing factors of the release rate should be considered. Herein we reviewed for the first time these factors and their influence on the release. These factors mainly include the AMs, food (or food simulant), packaging materials, the interactions among them, the temperature and environmental relative humidity (RH).

  20. 49 CFR 173.417 - Authorized fissile materials packages.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... for export and import shipments. (2) A residual “heel” of enriched solid uranium hexafluoride may be transported without a protective overpack in any metal cylinder that meets both the requirements of § 173.415....420 for packagings containing greater than 0.1 kg of uranium hexafluoride. Any such shipment must be...

  1. 49 CFR 173.417 - Authorized fissile materials packages.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... for export and import shipments. (2) A residual “heel” of enriched solid uranium hexafluoride may be transported without a protective overpack in any metal cylinder that meets both the requirements of § 173.415....420 for packagings containing greater than 0.1 kg of uranium hexafluoride. Any such shipment must be...

  2. 49 CFR 173.418 - Authorized packages-pyrophoric Class 7 (radioactive) materials.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... (radioactive) materials. 173.418 Section 173.418 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS REGULATIONS SHIPPERS-GENERAL REQUIREMENTS FOR SHIPMENTS AND PACKAGINGS Class 7 (Radioactive) Materials § 173...

  3. Short communication: Effect of active food packaging materials on fluid milk quality and shelf life.

    PubMed

    Wong, Dana E; Goddard, Julie M

    2014-01-01

    Active packaging, in which active agents are embedded into or on the surface of food packaging materials, can enhance the nutritive value, economics, and stability of food, as well as enable in-package processing. In one embodiment of active food packaging, lactase was covalently immobilized onto packaging films for in-package lactose hydrolysis. In prior work, lactase was covalently bound to low-density polyethylene using polyethyleneimine and glutaraldehyde cross-linkers to form the packaging film. Because of the potential contaminants of proteases, lipases, and spoilage organisms in typical enzyme preparations, the goal of the current work was to determine the effect of immobilized-lactase active packaging technology on unanticipated side effects, such as shortened shelf-life and reduced product quality. Results suggested no evidence of lipase or protease activity on the active packaging films, indicating that such active packaging films could enable in-package lactose hydrolysis without adversely affecting product quality in terms of dairy protein or lipid stability. Storage stability studies indicated that lactase did not migrate from the film over a 49-d period, and that dry storage resulted in 13.41% retained activity, whereas wet storage conditions enabled retention of 62.52% activity. Results of a standard plate count indicated that the film modification reagents introduced minor microbial contamination; however, the microbial population remained under the 20,000 cfu/mL limit through the manufacturer's suggested 14-d storage period for all film samples. This suggests that commercially produced immobilized lactase active packaging should use purified cross-linkers and enzymes. Characterization of unanticipated effects of active packaging on food quality reported here is important in demonstrating the commercial potential of such technologies. Copyright © 2014 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

  4. Packaging strategies for printed circuit board components. Volume I, materials & thermal stresses.

    SciTech Connect

    Neilsen, Michael K.; Austin, Kevin N.; Adolf, Douglas Brian

    2011-09-01

    Decisions on material selections for electronics packaging can be quite complicated by the need to balance the criteria to withstand severe impacts yet survive deep thermal cycles intact. Many times, material choices are based on historical precedence perhaps ignorant of whether those initial choices were carefully investigated or whether the requirements on the new component match those of previous units. The goal of this program focuses on developing both increased intuition for generic packaging guidelines and computational methodologies for optimizing packaging in specific components. Initial efforts centered on characterization of classes of materials common to packaging strategies and computational analysesmore » of stresses generated during thermal cycling to identify strengths and weaknesses of various material choices. Future studies will analyze the same example problems incorporating the effects of curing stresses as needed and analyzing dynamic loadings to compare trends with the quasi-static conclusions.« less

  5. Development of expert system for biobased polymer material selection: food packaging application.

    PubMed

    Sanyang, M L; Sapuan, S M

    2015-10-01

    Biobased food packaging materials are gaining more attention owing to their intrinsic biodegradable nature and renewability. Selection of suitable biobased polymers for food packaging applications could be a tedious task with potential mistakes in choosing the best materials. In this paper, an expert system was developed using Exsys Corvid software to select suitable biobased polymer materials for packaging fruits, dry food and dairy products. If - Then rule based system was utilized to accomplish the material selection process whereas a score system was formulated to facilitate the ranking of selected materials. The expert system selected materials that satisfied all constraints and selection results were presented in suitability sequence depending on their scores. The expert system selected polylactic acid (PLA) as the most suitable material.

  6. LEVERAGING AGING MATERIALS DATA TO SUPPORT EXTENSION OF TRANSPORTATION SHIPPING PACKAGES SERVICE LIFE

    SciTech Connect

    Dunn, K.; Bellamy, S.; Daugherty, W.

    2013-08-18

    Nuclear material inventories are increasingly being transferred to interim storage locations where they may reside for extended periods of time. Use of a shipping package to store nuclear materials after the transfer has become more common for a variety of reasons. Shipping packages are robust and have a qualified pedigree for performance in normal operation and accident conditions but are only certified over an approved transportation window. The continued use of shipping packages to contain nuclear material during interim storage will result in reduced overall costs and reduced exposure to workers. However, the shipping package materials of construction must maintainmore » integrity as specified by the safety basis of the storage facility throughout the storage period, which is typically well beyond the certified transportation window. In many ways, the certification processes required for interim storage of nuclear materials in shipping packages is similar to life extension programs required for dry cask storage systems for commercial nuclear fuels. The storage of spent nuclear fuel in dry cask storage systems is federally-regulated, and over 1500 individual dry casks have been in successful service up to 20 years in the US. The uncertainty in final disposition will likely require extended storage of this fuel well beyond initial license periods and perhaps multiple re-licenses may be needed. Thus, both the shipping packages and the dry cask storage systems require materials integrity assessments and assurance of continued satisfactory materials performance over times not considered in the original evaluation processes. Test programs for the shipping packages have been established to obtain aging data on materials of construction to demonstrate continued system integrity. The collective data may be coupled with similar data for the dry cask storage systems and used to support extending the service life of shipping packages in both transportation and storage.« less

  7. The LARSYS educational package: Instructor's notes. [instructional materials for training people to analyze remotely sensed data

    NASA Technical Reports Server (NTRS)

    Lindenlaub, J. C.; Davis, S. M.

    1974-01-01

    Materials are presented for assisting instructors in teaching the LARSYS Educational Package, which is a set of instructional materials to train people to analyze remotely sensed multispectral data. The seven units of the package are described. These units are: quantitative remote sensing, overview of the LARSYS software system, the 2780 remote terminal, demonstration of LARSYS on the 2780 remote terminal, exercises, guide to multispectral data analysis, and a case study using LARSYS for analysis of LANDSAT data.

  8. Hydrothermal carbonization of food waste and associated packaging materials for energy source generation.

    PubMed

    Li, Liang; Diederick, Ryan; Flora, Joseph R V; Berge, Nicole D

    2013-11-01

    Hydrothermal carbonization (HTC) is a thermal conversion technique that converts food wastes and associated packaging materials to a valuable, energy-rich resource. Food waste collected from local restaurants was carbonized over time at different temperatures (225, 250 and 275°C) and solids concentrations to determine how process conditions influence carbonization product properties and composition. Experiments were also conducted to determine the influence of packaging material on food waste carbonization. Results indicate the majority of initial carbon remains integrated within the solid-phase at the solids concentrations and reaction temperatures evaluated. Initial solids concentration influences carbon distribution because of increased compound solubilization, while changes in reaction temperature imparted little change on carbon distribution. The presence of packaging materials significantly influences the energy content of the recovered solids. As the proportion of packaging materials increase, the energy content of recovered solids decreases because of the low energetic retention associated with the packaging materials. HTC results in net positive energy balances at all conditions, except at a 5% (dry wt.) solids concentration. Carbonization of food waste and associated packaging materials also results in net positive balances, but energy needs for solids post-processing are significant. Advantages associated with carbonization are not fully realized when only evaluating process energetics. A more detailed life cycle assessment is needed for a more complete comparison of processes. Copyright © 2013 Elsevier Ltd. All rights reserved.

  9. Potential crush loading of radioactive material packages in highway, rail and marine accidents. Regulatory report

    SciTech Connect

    Colton, J.D.; Romander, C.M.

    1980-10-01

    The purpose of this study was to evaluate potential crush loads on radioactive material packages in highway, rail, and marine accidents. The study concluded that if allowance is made for small gaps between packages, the deflections produced by inertial crush are comparable (within 20%) of those produced by impact under the same accident conditions. Therefore an additional qualification test is not needed to ensure that the level of protection against crush is comparable to the current level of protection against impact. The study also evaluated potential crush loads in extremely severe transportation accidents. In highway accidents, the most severe crushmore » environment is produced when a truck carrying several small, soft packages strikes a rigid barrier and the inertia of the aft packages crushes the front package. In railroad accidents, severe crush environments are produced when a railcar on which the packages are carried strikes a barrier or when the packages are pinned between two railcars after a derailment. Analysis of ship collisions showed that for packages carried by a containerized cargo ship struck by another ship, the probability of producing significant crush loads is small because most collisions occur at low velocities during maneuvering. The study suggested various types of package tests which would simulate severe crush loads in each mode of transport.« less

  10. Materials science in pre-plated leadframes for electronic packages

    NASA Astrophysics Data System (ADS)

    Liu, Lilin

    Au/Pd/Ni pre-plated leadframes (PPF) are high performance frames for accommodating high-end electronic packages. Cost and reliability are major concerns in their wide application. The present work, from a materials science point view, deepens the understanding of PPFs, optimizes the conventional PPFs, develops a novel PPF architecture and models the residual stress relaxation in heteroepitaxial thin films. The wire pull test, the solderability test, and High-Resolution Transmission Electron Microscopy (HRTEM) were employed to characterize the PPFs in order to understand the relationship between performance and microstructure. We optimized the electroplating profiles and determined the minimum thickness of the Pd layer with the PPF performance satisfying the industry standards. Further increasing the Pd layer thickness beyond the critical thickness will not enhance the performance more, but increase the product cost. With the optimized electroplating profile, the electroplated Au layer is epitaxially deposited on the Pd layer, and so does the Pd layer on the Ni layer. Misfit dislocations and nanotwins are present at the interface between the Pd and Ni layers, which are generated to release the about 10.4% misfit strain between the Pd and Ni lattices. This work demonstrates that the electro-deposition technique can electroplate epitaxy-like Pd films on the highly (200) textured Ni films, which are grown on the Cu substrates. A novel technique for impeding Cu out-diffusion in Cu alloy based pre-plated leadframes was developed by electroplating a 3-4 nm thick Sn layer on a Cu alloy base prior to electroplating a Ni layer. A 10-14 nm thick epitaxy-like and dense (Cu,Ni)3Sn intermetallic compound (IMC) layer is automatically formed en route of diffuse reaction, which leads to a drastic reduction in Cu out-diffusion and hence improves significantly the protection of the leadframes against oxidation and corrosion attack. The oxidation behaviours were quantified by Electron

  11. Simplified analytical solutions for free drops during NCT for radioactive material packagings

    SciTech Connect

    Gupta, N.K.

    1997-07-01

    To ensure structural integrity during normal conditions of transport (NCT), Federal regulations in 10CFR71.71 require that the nuclear material package designs be evaluated for the effects of free drops. The vessel stress acceptance criteria for these drops are given in Regulatory Guide 7.6 and ASME Section III Code. During initial phases of the package design, the effects of the NCT free drops can be evaluated by simplified analytical solutions which will ensure that the safety margins specified in R. G. 7.6 are met. These safety margins can be verified during the final stages of the package design with dynamic analysesmore » using finite element methods. This paper calculates the maximum impact {open_quotes}g{close_quotes} loading on the vessels using single degree of freedom models for different drop orientations. Only end, bottom, and corner drops are analyzed for cylindrical packages or packages with cylindrical ends.« less

  12. Degradation Behavior and Accelerated Weathering of Composite Boards Produced from Waste Tetra Pak® Packaging Materials

    Treesearch

    Nural Yilgor; Coskun Kose; Evren Terzi; Aysel Kanturk Figen; Rebecca Ibach; S. Nami Kartal; Sabriye Piskin

    2014-01-01

    Manufacturing panels from Tetra Pak® (TP) packaging material might be an alternative to conventional wood-based panels. This study evaluated some chemical and physical properties as well as biological, weathering, and fire performance of panels with and without zinc borate (ZnB) by using shredded TP packaging cartons. Such packaging material, a worldwide well-known...

  13. 77 FR 36017 - Regulatory Guide 7.3, Procedures for Picking Up and Receiving Packages of Radioactive Material

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-15

    ... Receiving Packages of Radioactive Material AGENCY: Nuclear Regulatory Commission. ACTION: Notice of... Guide (RG) 7.3, ``Procedures for Picking Up and Receiving Packages of Radioactive Material.'' The guide..., ``Administrative Guide for Verifying Compliance with Packaging Requirements for Shipment and Receipt of Radioactive...

  14. Technological challenges of addressing new and more complex migrating products from novel food packaging materials.

    PubMed

    Munro, Ian C; Haighton, Lois A; Lynch, Barry S; Tafazoli, Shahrzad

    2009-12-01

    The risk assessment of migration products resulting from packaging material has and continues to pose a difficult challenge. In most jurisdictions, there are regulatory requirements for the approval or notification of food contact substances that will be used in packaging. These processes generally require risk assessment to ensure safety concerns are addressed. The science of assessing food contact materials was instrumental in the development of the concept of Threshold of Regulation and the Threshold of Toxicological Concern procedures. While the risk assessment process is in place, the technology of food packaging continues to evolve to include new initiatives, such as the inclusion of antimicrobial substances or enzyme systems to prevent spoilage, use of plastic packaging intended to remain on foods as they are being cooked, to the introduction of more rigid, stable and reusable materials, and active packaging to extend the shelf-life of food. Each new technology brings with it the potential for exposure to new and possibly novel substances as a result of migration, interaction with other chemical packaging components, or, in the case of plastics now used in direct cooking of products, degradation products formed during heating. Furthermore, the presence of trace levels of certain chemicals from packaging that were once accepted as being of low risk based on traditional toxicology studies are being challenged on the basis of reports of adverse effects, particularly with respect to endocrine disruption, alleged to occur at very low doses. A recent example is the case of bisphenol A. The way forward to assess new packaging technologies and reports of very low dose effects in non-standard studies of food contact substances is likely to remain controversial. However, the risk assessment paradigm is sufficiently robust and flexible to be adapted to meet these challenges. The use of the Threshold of Regulation and the Threshold of Toxicological Concern concepts may

  15. Development of a Water Soluble Foam Packaging Material

    DTIC Science & Technology

    1975-01-01

    Material, Expanded Polystyrene , Looae-Fill Bulk and standard properties were established. Additional investigations conducted on the loose-fill samples...mechanical properties when tested as described in Federal Specification PPP-O-1683; Cushioning Material, Expanded Polystyrene , Loose-Fill Bulk. The following

  16. Food safety concerns deriving from the use of silver based food packaging materials

    PubMed Central

    Pezzuto, Alessandra; Losasso, Carmen; Mancin, Marzia; Gallocchio, Federica; Piovesana, Alessia; Binato, Giovanni; Gallina, Albino; Marangon, Alberto; Mioni, Renzo; Favretti, Michela; Ricci, Antonia

    2015-01-01

    The formulation of innovative packaging solutions, exerting a functional antimicrobial role in slowing down food spoilage, is expected to have a significant impact on the food industry, allowing both the maintenance of food safety criteria for longer periods and the reduction of food waste. Different materials are considered able to exert the required antimicrobial activity, among which are materials containing silver. However, challenges exist in the application of silver to food contact materials due to knowledge gaps in the production of ingredients, stability of delivery systems in food matrices and health risks caused by the same properties which also offer the benefits. Aims of the present study were to test the effectiveness and suitability of two packaging systems, one of which contained silver, for packaging and storing Stracchino cheese, a typical Italian fresh cheese, and to investigate if there was any potential for consumers to be exposed to silver, via migration from the packaging to the cheese. Results did not show any significant difference in the effectiveness of the packaging systems on packaged Stracchino cheese, excluding that the active packaging systems exerted an inhibitory effect on the growth of spoilage microorganisms. Moreover, silver migrated into the cheese matrix throughout the storage time (24 days). Silver levels in cheese finally exceeded the maximum established level for the migration of a non-authorised substance through a functional barrier (Commission of the European Communities, 2009). This result poses safety concerns and strongly suggests the need for more research aimed at better characterizing the new packaging materials in terms of their potential impacts on human health and the environment. PMID:26500642

  17. Use of thermal desorption GC-MS to characterize packaging materials for potential extractables.

    PubMed

    Zweiben, Cindy; Shaw, Arthur J

    2009-01-01

    This article presents case studies involving the use of thermal desorption gas chromatography-mass spectrometry to compositionally characterize pharmaceutical packaging materials for potential extractables. Knowledge of potential extractables and leachables early in the product development program allows the project team to make informed decisions, potentially minimizing redevelopment efforts and reducing cost. Case studies include selection of a label for use on a polyethylene bottle, selection of a drug contact surface of a blister packaging system, and selection of a stopper.

  18. Performance of Nonmigratory Iron Chelating Active Packaging Materials in Viscous Model Food Systems.

    PubMed

    Roman, Maxine J; Decker, Eric A; Goddard, Julie M

    2015-09-01

    Many packaged food products undergo quality deterioration due to iron promoted oxidative reactions. Recently, we have developed a nonmigratory iron chelating active packaging material that represents a novel approach to inhibit oxidation of foods while addressing consumer demands for "cleanˮ labels. A challenge to the field of nonmigratory active packaging is ensuring that surface-immobilized active agents retain activity in a true food system despite diffusional limitations. Yet, the relationship between food viscosity and nonmigratory active packaging activity retention has never been characterized. The objective of this study was to investigate the influence of food viscosity on iron chelation by a nonmigratory iron chelating active packaging material. Methyl cellulose was added to aqueous buffered iron solutions to yield model systems with viscosities ranging from ∼1 to ∼10(5)  mPa·s, representing viscosities ranging from beverage to mayonnaise. Iron chelation was quantified by material-bound iron content using colorimetry and inductively coupled plasma-optical emission spectrometry (ICP-OES).  Maximum iron chelation was reached in solutions up to viscosity ∼10(2)  mPa·s. In more viscous solutions (up to ∼10(4)  mPa·s), there was a significant decrease in iron chelating capacity (P < 0.05). However, materials still retained at least 76% iron chelating capacity. Additionally, the influence of different food hydrocolloids on the performance of nonmigratory iron chelating active packaging was characterized. Methyl cellulose and carrageenan did not compete with the material for specific iron chelation (P > 0.05). Materials retained 32% to 45% chelating capacity when in contact with competitively chelating hydrocolloids guar gum, locust bean gum, and xanthan gum. This work demonstrates the potential application of nonmigratory iron chelating active packaging in liquid and semi-liquid foods to allow for the removal of synthetic chelators, while

  19. Stability of flavoured phytosterol-enriched drinking yogurts during storage as affected by different packaging materials.

    PubMed

    Semeniuc, Cristina Anamaria; Cardenia, Vladimiro; Mandrioli, Mara; Muste, Sevastiţa; Borsari, Andrea; Rodriguez-Estrada, Maria Teresa

    2016-06-01

    The aim of this study was to investigate the influence of different packaging materials on storage stability of flavoured phytosterol-enriched drinking yogurts. White vanilla (WV) and blood orange (BO) phytosterol-enriched drinking yogurts conditioned in mono-layer and triple-layer co-extruded plastic bottles were stored at +6 ± 1 °C for 35 days (under alternating 12 h light and 12 h darkness) to simulate shelf-life conditions. Samples were collected at three different storage times and subjected to determination of total sterol content (TSC), peroxide value (PV) and thiobarbituric acid reactive substances (TBARs). TSC was not significantly affected by packaging material or storage time and met the quantity declared on the label. PV was significantly influenced by yogurt type × packaging material × storage time interaction and TBARs by packaging material × storage time interaction. Between the two packaging materials, the triple-layer plastic mini bottle with black coloured and completely opaque intermediate layer offered the best protection against lipid oxidation. © 2015 Society of Chemical Industry. © 2015 Society of Chemical Industry.

  20. Aluminum-Scandium: A Material for Semiconductor Packaging

    NASA Astrophysics Data System (ADS)

    Geissler, Ute; Thomas, Sven; Schneider-Ramelow, Martin; Mukhopadhyay, Biswajit; Lang, Klaus-Dieter

    2016-10-01

    A well-known aluminum-scandium (Al-Sc) alloy, already used in lightweight sports equipment, is about to be established for use in electronic packaging. One application for Al-Sc alloy is manufacture of bonding wires. The special feature of the alloy is its ability to harden by precipitation. The new bonding wires with electrical conductivity similar to pure Al wires can be processed on common wire bonders for aluminum wedge/wedge (w/w) bonding. The wires exhibit very fine-grained microstructure. Small Al3Sc particles are the main reason for its high strength and prevent recrystallization and grain growth at higher temperatures (>150°C). After the wire-bonding process, the interface is well closed. Reliability investigations by active power cycling demonstrated considerably improved lifetime compared with pure Al heavy wires. Furthermore, the Al-Sc alloy was sputter-deposited onto silicon wafer to test it as chip metallization in copper (Cu) ball/wedge bonding technology. After deposition, the layers exhibited fine-grained columnar structure and small coherent Al3Sc particles with dimensions of a few nanometers. These particles inhibit softening processes such as Al splashing in fine wire bonding processes and increase the thickness of remnant Al under the copper balls to 85% of the initial thickness.

  1. Packaging biological cargoes in mesoporous materials: opportunities for drug delivery.

    PubMed

    Siefker, Justin; Karande, Pankaj; Coppens, Marc-Olivier

    2014-11-01

    Confinement of biomolecules in structured nanoporous materials offers several desirable features ranging from chemical and thermal stability, to resistance to degradation from the external environment. A new generation of mesoporous materials presents exciting new possibilities for the formulation and controlled release of biological agents. Such materials address niche applications in enteral and parenteral delivery of biologics, such as peptides, polypeptides, enzymes and proteins for use as therapeutics, imaging agents, biosensors, and adjuvants. Mesoporous silica Santa Barbara Amorphous-15 (SBA-15), with its unique, tunable pore diameter, and easily functionalized surface, provides a representative example of this new generation of materials. Here, we review recent advances in the design and synthesis of nanostructured mesoporous materials, focusing on SBA-15, and highlight opportunities for the delivery of biological agents to various organ and tissue compartments. The SBA-15 platform provides a delivery carrier that is inherently separated from the active biologic due to distinct intra and extra-particle environments. This permits the SBA-15 platform to not require direct modification of the active biological therapeutic. Additionally, this makes the platform universal and allows for its application independent of the desired methods of discovery and development. The SBA-15 platform also directly addresses issues of targeted delivery and controlled release, although future challenges in the implementation of this platform reside in particle design, biocompatibility, and the tunability of the internal and external material properties. Examples illustrating the flexibility in the application of the SBA-15 platform are also discussed.

  2. Analysis of inclusion stress response in materials surrounding a torpedo shaped gage package

    SciTech Connect

    Stout, R.B.; Larson, D.B.; Thigpen, L.

    1988-11-01

    A displacement-stress analysis of a torpedo-shaped gage package is developed. This analysis is necessary in order to infer compressive stress-strain history data from the response of the gage when it is embedded in a material that surrounds an underground nuclear explosion. A torpedo-shaped gage package consists of a copper shell surrounding a cylinder of PMMA with embedded piezoresistive foils. Recent experimental and analytical results are reviewed which showed that the resistance response from foils embedded in PMMA can be inverted to obtain a set of stress-strain histories in the PMMA. In axial-symmetrical loaded geometries, this set of stress-strain histories ismore » sufficient to completely describe the elastic displacement and stress response of the PMMA cylinder. By matching displacement and traction boundary conditions at the PMMA-copper interface the elastic response of the copper can also be described. The next analysis step is to relate the displacement-stress response at the exterior surface of the copper shell to the stress response in the surrounding material. Two different cases are considered: one case is called quasi-plane strain to approximate an axially weak gage package relative to the strength of the surrounding material, and the second case is called quasi-plane stress to approximate an axially strong gage package relative to the strength of the surrounding material. Results show that compressive stress histories inferred in the surrounding material are greater than compressive stress histories measured in the PMMA for a ''weak'' gage package placed in a ''strong'' surrounding material. And for the other situation of a ''strong'' gage package placed in a ''weak'' surrounding material are less than the compressive stress histories measured in the PMMA. 12 refs., 5 figs.« less

  3. Flexible Foam Protection Materials for Constellation Space Suit Element Portable Life Support Subsystem Packaging Study

    NASA Technical Reports Server (NTRS)

    Tang, Henry H.; Orndoff, Evelyne S.; Thomas, Gretchen A.

    2009-01-01

    This paper discusses the effort in evaluating and selecting a light weight impact protection material for the Constellation Space Suit Element (CSSE) Portable Life Support Subsystem (PLSS) conceptual packaging study. A light weight material capable of holding and protecting the components inside the PLSS is required to demonstrate the viability of the flexible PLSS packaging concept. The material needs to distribute, dissipate, and absorb the impact energy of the PLSS falling on the lunar surface. It must also be very robust and function in the extreme lunar thermal vacuum environment for up to one hundred Extravehicular Activity (EVA) missions. This paper documents the performance requirements for selecting a foam protection material, and the methodologies for evaluating commercial off-the-shelf (COTS) foam protection materials. It also presents the materials properties test results and impact drop test results of the various foam materials evaluated in the study. The findings from this study suggest that a foam based flexible protection system is a viable solution for PLSS packaging. However, additional works are needed to optimize COTS foam properties or to develop a composite foam system that will meet all the performance requirements for the CSSE PLSS flexible packaging.

  4. Effect of different new packaging materials on biscuit quality during accelerated storage.

    PubMed

    Romani, Santina; Tappi, Silvia; Balestra, Federica; Rodriguez Estrada, Maria Teresa; Siracusa, Valentina; Rocculi, Pietro; Dalla Rosa, Marco

    2015-06-01

    The effect of innovative multilayer packaging materials versus a standard one on biscuit quality was studied during accelerated storage at 25, 35, 45 °C and 50% relative humidity for 92 days. Three different packaging materials were used: metalized orientated polypropylene (OPP)/paper (control); metalized poly-lactic acid (PLA)/paper; metalized OPP with ethylene vinyl acetate pro-oxidant additive (EVA-POA)/paper. EVA-POA additive is used to make the plastic layer biodegradable. Various quality sample parameters (moisture, water activity (aw ), texture, peroxide value (PV), hexanal) were analysed during storage. Rate constants (k) and activation energies (Ea ) of hydration reactions and hexanal formation were calculated. No remarkable differences in the evolution of primary and secondary lipid oxidation were observed among differently packed biscuits during storage. All samples maintained PV levels between 4 and 14 meq O2 kg(-1) oil. The product in flexible packaging with PLA reached the highest moisture and aw levels, but they did not significantly and adversely affect the other quality characteristics. The obtained results demonstrate that the new tested packaging materials were suitable for commercial biscuit storage, having similar performance and preservation effects on the overall product quality to those of the standard one. Furthermore, these results could make a contribution to the food industry, encouraging the use of packaging materials with a negligible environmental impact as an alternative to petroleum-based ones. © 2014 Society of Chemical Industry.

  5. An Investigation Into The Viability Of Nanocrystalline Cellulose As A Packaging Material

    NASA Astrophysics Data System (ADS)

    Glass, John

    The focus of this proposal is to identify unexplored areas of research in the field of packaging science, specifically related to the incorporation of Nanocrystalline Cellulose (NCC) as a functional material in fiber based packaging, as well as to highlight some of potential risks and unknowns in the product lifecycle. This research hypothesizes that incorporating NCC into wood fiber-based c-flute corrugated packaging medium will show a sufficient performance improvement to justify additional research. Nanomaterials, as a whole, are still being understood, including those using naturally occurring bases such as NCC. Further incremental testing with NCC will help provide a performance and safety baseline for the necessary future research prior to mass production. NCC holds great promise for the future: a commonly available, naturally occurring material that's easily recyclable and biodegradable, yet has the strength of steel. Due diligence is required for this material to come to market in a safe and sustainable manner.

  6. Determination of Fire Enviroment in Stacked Cargo Containers with Radioactive Materials Packages

    SciTech Connect

    Arviso, M.; Bobbe, J.G.; Dukart, R.D.

    1999-05-01

    Results from a Fire Test with a three-by-three stack of standard 6 m long International Standards Organization shipping containers containing combustible fuels and empty radioactive materials packages are reported and discussed. The stack is intended to simulate fire conditions that could occur during on-deck stowage on container cargo ships. The fire is initated by locating the container stack adjacent to a 9.8 x 6 m pool fire. Temperatures of both cargoes (empty and simulated radioactive materials packages) and containers are recorded and reported. Observations on the duration, intensity and spread of the fire are discussed. Based on the results, modelsmore » for simulation of fire exposure of radioactive materials packages in such fires are suggested.« less

  7. Effect of packaging materials and storage environment on postharvest quality of papaya fruit.

    PubMed

    Azene, Mulualem; Workneh, Tilahun Seyoum; Woldetsadik, Kebede

    2014-06-01

    This experiment was conducted to assess the effects of packaging materials and storage environments on shelf life of papaya fruit (Carica papaya L.). A factorial combination of five packaging materials and two storage environments using randomized complete block design with three replications were used. The papaya fruits were evaluated for weight loss, percentage marketability, firmness, total soluble solids, pH, titratable acidity, ascorbic acid, reducing sugar and total sugar content. The packaged and cooled fruits remained firmer than unpackaged and evaporatively cooled fruits. Higher chemical compositions were recorded in the control fruits stored under ambient conditions during the earlier times of storage. Packaging and cooling maintained the chemical quality of papaya fruits better than the control sample fruits towards the end of storage periods. The evaporatively cooled storage combined with packaging improved the shelf life of papaya fruits by more than two fold. The polyethylene bag packaging combined with evaporatively cooled storage maintained the superior quality of papaya fruit for a period of 21 days. This integrated agro-technology is recommended for postharvest loss reduction biotechnology in hot regions.

  8. Effect of packaging materials on shelf life and quality of banana cultivars (Musa spp.).

    PubMed

    Hailu, M; Seyoum Workneh, T; Belew, D

    2014-11-01

    This study was carried out to evaluate the effect of packaging materials on the shelf life of three banana cultivars. Four packaging materials, namely, perforated low density polyethylene bag, perforated high density polyethylene bag, dried banana leaf, teff straw and no packaging materials (control) were used with three banana cultivars, locally known as, Poyo, Giant Cavendish and Williams I. The experiment was carried out in Randomized Complete Block Design in a factorial combination with three replications. Physical parameters including weight loss, peel colour, peel thickness, pulp thickness, pulp to peel ratio, pulp firmness, pulp dry matter, decay, loss percent of marketability were assessed every 3 days. Banana remained marketable for 36 days in the high density polyethylene and low density polyethylene bags, and for 18 days in banana leaf and teff straw packaging treatments. Unpackaged fruits remained marketable for 15 days only. Fruits that were not packaged lost their weight by 24.0 % whereas fruits packaged in banana leaf and teff straw became unmarketable with final weight loss of 19.8 % and 20.9 %, respectively. Packaged fruits remained well until 36th days of storage with final weight loss of only 8.2 % and 9.20 %, respectively. Starting from green mature stage, the colour of the banana peel changed to yellow and this process was found to be fast for unpackaged fruits. Packaging maintained the peel and the pulp thickness, firmness, dry matter and pulp to peel ratio was kept lower. Decay loss for unpackaged banana fruits was16 % at the end of date 15, whereas the decay loss of fruits packaged using high density and low density polyethylene bags were 43.0 % and 41.2 %, respectively at the end of the 36th day of the experiment. It can, thus, be concluded that packaging of banana fruits in high density and low density polyethylene bags resulted in longer shelf life and improved quality of the produce followed by packaging in dried banana leaf

  9. Flexible Foam Protection Materials for Portable Life Support System Packaging Study

    NASA Technical Reports Server (NTRS)

    Tang,Henry H.; Dillon, Paul A.; Thomas, Gretchen A.

    2009-01-01

    This paper discusses the phase I effort in evaluating and selecting a light weight impact protection material for the Constellation Space Suit Element (CSSE) Portable Life Support System (PLSS) conceptual packaging study. A light weight material capable of holding and protecting the components inside the PLSS is required to demonstrate the viability of the flexible PLSS packaging concept. The material needs to distribute, dissipate, and absorb the impact energy of the PLSS falling on the lunar surface. It must also be robust to consistently perform over several Extravehicular Activity (EVA) missions in the extreme lunar thermal vacuum environment. This paper documents the performance requirements for selecting a foam protection material, and the methodologies for evaluating some commercial off-the-shelf (COTS) foam material candidates. It also presents the mechanical properties and impact drop tests results of the foam material candidates. The results of this study suggest that a foam based flexible protection system is a viable solution for PLSS packaging. However, additional works are needed to optimize COTS foam or to develop a composite foam system that will meet all the performance requirements for the CSSE PLSS flexible packaging.

  10. 49 CFR 173.211 - Non-bulk packagings for solid hazardous materials in Packing Group I.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... Inner packagings: Glass or earthenware receptacles Plastic receptacles Metal receptacles Glass ampoules... fiberboard box: 6PA2, 6PB2, 6PC or 6PG2 Glass, porcelain or stoneware in expanded or solid plastic packaging... 49 Transportation 2 2014-10-01 2014-10-01 false Non-bulk packagings for solid hazardous materials...

  11. 49 CFR 173.211 - Non-bulk packagings for solid hazardous materials in Packing Group I.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... Inner packagings: Glass or earthenware receptacles Plastic receptacles Metal receptacles Glass ampoules... fiberboard box: 6PA2, 6PB2, 6PC or 6PG2 Glass, porcelain or stoneware in expanded or solid plastic packaging... 49 Transportation 2 2013-10-01 2013-10-01 false Non-bulk packagings for solid hazardous materials...

  12. Corrosion Protection Provided by PV Module Packaging Materials

    SciTech Connect

    Jorgensen, G. J.; Kempe, M. D.; Terwilliger, K. M.

    2005-11-01

    The ability of glass/glass and glass/breathable backsheet constructions laminated with various encapsulant and/or edge seal materials to protect thin-film aluminum coatings deposited onto glass substrates was assessed. Although they provide the best moisture barrier available, glass/glass laminate constructions can trap harmful compounds that catalyze moisture-driven corrosion of the aluminum. Constructions with breathable backsheets allow higher rates of moisture ingress, but also allow egress of deleterious substances that can result in decreased corrosion.

  13. 19 CFR 10.815 - Packaging and packing materials and containers for retail sale and for shipment.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... retail sale and for shipment. 10.815 Section 10.815 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION... materials and containers for retail sale and for shipment. Packaging materials and containers in which a good is packaged for retail sale and packing materials and containers for shipment are to be...

  14. 19 CFR 10.878 - Packaging and packing materials and containers for retail sale and for shipment.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... retail sale and for shipment. 10.878 Section 10.878 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION... materials and containers for retail sale and for shipment. Packaging materials and containers in which a good is packaged for retail sale and packing materials and containers for shipment are to be...

  15. 19 CFR 10.775 - Packaging and packing materials and containers for retail sale and for shipment.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... retail sale and for shipment. 10.775 Section 10.775 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION... materials and containers for retail sale and for shipment. Packaging materials and containers in which a good is packaged for retail sale and packing materials and containers for shipment are to be...

  16. 19 CFR 10.815 - Packaging and packing materials and containers for retail sale and for shipment.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... retail sale and for shipment. 10.815 Section 10.815 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION... materials and containers for retail sale and for shipment. Packaging materials and containers in which a good is packaged for retail sale and packing materials and containers for shipment are to be...

  17. 19 CFR 10.775 - Packaging and packing materials and containers for retail sale and for shipment.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... retail sale and for shipment. 10.775 Section 10.775 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION... materials and containers for retail sale and for shipment. Packaging materials and containers in which a good is packaged for retail sale and packing materials and containers for shipment are to be...

  18. Assessment of Quality Assurance Measures for Radioactive Material Transport Packages not Requiring Competent Authority Design Approval - 13282

    SciTech Connect

    Komann, Steffen; Groeke, Carsten; Droste, Bernhard

    2013-07-01

    The majority of transports of radioactive materials are carried out in packages which don't need a package design approval by a competent authority. Low-active radioactive materials are transported in such packages e.g. in the medical and pharmaceutical industry and in the nuclear industry as well. Decommissioning of NPP's leads to a strong demand for packages to transport low and middle active radioactive waste. According to IAEA regulations the 'non-competent authority approved package types' are the Excepted Packages and the Industrial Packages of Type IP-1, IP-2 and IP-3 and packages of Type A. For these types of packages an assessment bymore » the competent authority is required for the quality assurance measures for the design, manufacture, testing, documentation, use, maintenance and inspection (IAEA SSR 6, Chap. 306). In general a compliance audit of the manufacturer of the packaging is required during this assessment procedure. Their regulatory level in the IAEA regulations is not comparable with the 'regulatory density' for packages requiring competent authority package design approval. Practices in different countries lead to different approaches within the assessment of the quality assurance measures in the management system as well as in the quality assurance program of a special package design. To use the package or packaging in a safe manner and in compliance with the regulations a management system for each phase of the life of the package or packaging is necessary. The relevant IAEA-SSR6 chap. 801 requires documentary verification by the consignor concerning package compliance with the requirements. (authors)« less

  19. Nanostructured Materials Utilized in Biopolymer-based Plastics for Food Packaging Applications.

    PubMed

    Ghanbarzadeh, Babak; Oleyaei, Seyed Amir; Almasi, Hadi

    2015-01-01

    Most materials currently used for food packaging are nondegradable, generating environmental problems. Several biopolymers have been exploited to develop materials for ecofriendly food packaging. However, the use of biopolymers has been limited because of their usually poor mechanical and barrier properties, which may be improved by adding reinforcing compounds (fillers), forming composites. Most reinforced materials present poor matrix-filler interactions, which tend to improve with decreasing filler dimensions. The use of fillers with at least one nanoscale dimension (nanoparticles) produces nanocomposites. Nanoparticles have proportionally larger surface area than their microscale counterparts, which favors the filler-matrix interactions and the performance of the resulting material. Besides nanoreinforcements, nanoparticles can have other functions when added to a polymer, such as antimicrobial activity, etc. in this review paper, the structure and properties of main kinds of nanostructured materials which have been studied to use as nanofiller in biopolymer matrices are overviewed, as well as their effects and applications.

  20. Survival of Spoilage and Pathogenic Microorganisms on Cardboard and Plastic Packaging Materials

    PubMed Central

    Siroli, Lorenzo; Patrignani, Francesca; Serrazanetti, Diana I.; Chiavari, Cristiana; Benevelli, Marzia; Grazia, Luigi; Lanciotti, Rosalba

    2017-01-01

    The aim of this work was to study the interaction of corrugated and plastic materials with pathogenic and spoiling microorganisms frequently associated to fresh produce. The effect of the two packaging materials on the survival during the storage of microorganisms belonging to the species Escherichia coli, Listeria monocytogenes, Salmonella enteritidis, Saccharomyces cerevisiae, Lactobacillus plantarum, Pseudomonas fluorescens, and Aspergillus flavus was studied through traditional plate counting and scanning electron microscopy (SEM). The results obtained showed that cardboard materials, if correctly stored, reduced the potential of packaging to cross-contaminate food due to a faster viability loss by spoilage and pathogenic microorganisms compared to the plastic ones. In fact, the cell loads of the pathogenic species considered decreased over time independently on the inoculation level and packaging material used. However, the superficial viability losses were significantly faster in cardboard compared to plastic materials. The same behavior was observed for the spoilage microorganisms considered. The SEM microphotographs indicate that the reduction of superficial contamination on cardboard surfaces was due to the entrapping of the microbial cells within the fibers and the pores of this material. In addition, SEM data showed that the entrapped cells were subjected to more or less rapid lyses, depending on the species, due to the absence of water and nutrients, with the exception of molds. The latter spoilers were able to proliferate inside the cardboard fibers only when the absorption of water was not prevented during the storage. In conclusion, the findings of this work showed the reduction of cross-contamination potential of corrugated compared to plastic packaging materials used in fruit and vegetable sector. However, the findings outlined the importance of hygiene and low humidity during cardboard storage to prevent the mold growth on packaging. PMID:29312271

  1. Effect of packaging materials and storage on major volatile compounds in three Australian native herbs.

    PubMed

    Chaliha, Mridusmita; Cusack, Andrew; Currie, Margaret; Sultanbawa, Yasmina; Smyth, Heather

    2013-06-19

    Lemon myrtle, anise myrtle, and Tasmanian pepper leaf are commercial Australian native herbs with a high volatile or essential oil content. Packaging of the herbs in high- or low-density polyethylene (HDPE and LDPE) has proven to be ineffective in preventing a significant loss of volatile components on storage. This study investigates and compares the effectiveness of alternate high-barrier property packaging materials, namely, polyvinylidene chloride coated polyethylene terephthalate/casted polypropylene (PVDC coated PET/CPP) and polyethylene terephthalate/polyethylene terephthalate/aluminum foil/linear low-density polyethylene (PET/PET/Foil/LLDPE), in prevention of volatile compound loss from the three native herbs stored at ambient temperature for 6 months. Concentrations of major volatiles were monitored using gas chromatography-mass spectrometry (GC-MS) techniques. After 6 months of storage, the greatest loss of volatiles from lemon myrtle was observed in traditional LDPE packaging (87% loss) followed by storage in PVDC coated PET/CPP (58% loss) and PET/PET/Foil/LLDPE (loss of 23%). The volatile loss from anise myrtle and Tasmanian pepper leaf stored in PVDC coated PET/CPP and PET/PET/Foil/LLDPE packaging was <30%. This study clearly indicates the importance of selecting the correct packaging material to retain the quality of herbs with high volatile content.

  2. The Use of Films as Suitable Packaging Materials for Minimally Processed Foods

    DTIC Science & Technology

    1994-08-01

    precise composition of a package material, we can reveal information about whether flavor volatiles are being scalped from the food product by the... grapefruit with 16-day shelf life at 1-2*C. Vented Foods: Today’s vented foods are rapidly moving beyond the confines of chips, pastries, and chewing

  3. 49 CFR 173.457 - Transportation of fissile material packages-specific requirements.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... with their definitions in § 173.403, a criticality safety index (CSI) and a transport index (TI). (b... vessels, the total sum of CSI's in a freight container or on a conveyance may not exceed 50. (e) For... container or on a conveyance may not exceed 100. (f) Exclusive use shipments of fissile material packages...

  4. 49 CFR 173.457 - Transportation of fissile material packages-specific requirements.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... with their definitions in § 173.403, a criticality safety index (CSI) and a transport index (TI). (b... vessels, the total sum of CSI's in a freight container or on a conveyance may not exceed 50. (e) For... container or on a conveyance may not exceed 100. (f) Exclusive use shipments of fissile material packages...

  5. 49 CFR 173.457 - Transportation of fissile material packages-specific requirements.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... with their definitions in § 173.403, a criticality safety index (CSI) and a transport index (TI). (b... vessels, the total sum of CSI's in a freight container or on a conveyance may not exceed 50. (e) For... container or on a conveyance may not exceed 100. (f) Exclusive use shipments of fissile material packages...

  6. 49 CFR 173.457 - Transportation of fissile material packages-specific requirements.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... with their definitions in § 173.403, a criticality safety index (CSI) and a transport index (TI). (b... vessels, the total sum of CSI's in a freight container or on a conveyance may not exceed 50. (e) For... container or on a conveyance may not exceed 100. (f) Exclusive use shipments of fissile material packages...

  7. Variation in Inspection Efficacy by Member States of Wood Packaging Material Entering the European Union

    Treesearch

    Dominic Eyre; Roy Macarthur; Robert A Haack; Yi Lu; Hannes Krehan

    2018-01-01

    The use of wood packaging materials (WPMs) in international trade is recognized as a pathway for the movement of invasive pests and as the origin of most introductions of Asian longhorned beetle, Anoplophora glabripennis (Motschulsky) (Coleoptera: Cerambycidae) in Europe and North America. Following several pest interceptions on WPM associated with...

  8. Seeking alternatives to probit 9 when developing treatments for wood packaging materials under ISPM No. 15

    Treesearch

    R.A. Haack; A. Uzunovic; K. Hoover; J.A. Cook

    2011-01-01

    ISPM No. 15 presents guidelines for treating wood packaging material used in international trade. There are currently two approved phytosanitary treatments: heat treatment and methyl bromide fumigation. New treatments are under development, and are needed given that methyl bromide is being phased out. Probit 9 efficacy (100% mortality of at least 93 613 test organisms...

  9. Changes in antioxidant compounds during the shelf life of commercial tomato juices in different packaging materials.

    PubMed

    García-Alonso, Francisco J; Bravo, Sergio; Casas, Javier; Pérez-Conesa, Darío; Jacob, Karin; Periago, María J

    2009-08-12

    Tomatoes provide an optimal mix of dietary antioxidants that may be responsible for the reported health benefits of tomato consumption. However, technological processing, packaging materials, and storage conditions have an impact on the nutritional quality of tomato products by affecting the stability of antioxidant nutrients to different extents. In this study, we evaluated the stability of the antioxidant compounds (lycopene, ascorbic acid, total phenols, and total flavonoids) present in commercially available tomato juices during storage extended for 12 months at three different temperatures (8, 22, and 37 degrees C). To further characterize the impact of storage conditions, two commonly used packaging materials (Tetra pack and glass bottles) were used to determine whether packaging materials affect antioxidant stability. Overall, the total lycopene, total phenolic compounds, and total flavonoids remained almost stable during storage for 12 months, regardless of the packaging material used, indicating that tomato juices maintain their nutritional value in terms of antioxidant composition during their shelf life. However, ascorbic acid was the most labile antioxidant and was markedly affected by storage conditions. The hydrophilic total antioxidant activity (TAA) paralleled the losses in ascorbic acid content, whereas the lipophilic TAA remained substantially stable throughout the storage trial.

  10. Surface modification of food contact materials for processing and packaging applications

    NASA Astrophysics Data System (ADS)

    Barish, Jeffrey A.

    This body of work investigates various techniques for the surface modification of food contact materials for use in food packaging and processing applications. Nanoscale changes to the surface of polymeric food packaging materials enables changes in adhesion, wettability, printability, chemical functionality, and bioactivity, while maintaining desirable bulk properties. Polymer surface modification is used in applications such as antimicrobial or non-fouling materials, biosensors, and active packaging. Non-migratory active packagings, in which bioactive components are tethered to the package, offer the potential to reduce the need for additives in food products while maintaining safety and quality. A challenge in developing non-migratory active packaging materials is the loss of biomolecular activity that can occur when biomolecules are immobilized. Polyethylene glycol (PEG), a biocompatible polymer, is grafted from the surface of ozone treated low-density polyethylene (LDPE) resulting in a surface functionalized polyethylene to which a range of amine-terminated bioactive molecules can be immobilized. The grafting of PEG onto the surface of polymer packaging films is accomplished by free radical graft polymerization, and to covalently link an amine-terminated molecule to the PEG tether, demonstrating that amine-terminated bioactive compounds (such as peptides, enzymes, and some antimicrobials) can be immobilized onto PEG-grafted LDPE in the development of non-migratory active packaging. Fouling on food contact surfaces during food processing has a significant impact on operating efficiency and can promote biofilm development. Processing raw milk on plate heat exchangers results in significant fouling of proteins as well as minerals, and is exacerbated by the wall heating effect. An electroless nickel coating is co-deposited with polytetrafluoroethylene onto stainless steel to test its ability to resist fouling on a pilot plant scale plate heat exchanger. Further

  11. Off-flavour release from packaging materials and its prevention: a foods company's approach.

    PubMed

    Huber, M; Ruiz, J; Chastellain, F

    2002-01-01

    Off-flavours in packed food are causes for consumer complaints. Often, they are related to packaging materials. For food companies, this represents not only costs related to production, but also a possible loss of brand confidence and market share. The origin of packaging-related off-odours are many sided. Odours derive from the degradation of base packaging materials and their converting processes, including printing, coating and lamination as well as the interaction between food and packaging. Many substances and groups of substances have been identified so far. In spite of the fact that the quality of packaging materials is clearly defined in the specifications (e.g. limit for residual solvents, standardized odour and taste transfer tests), off-flavour cases still do occur. This paper sets out ways of avoiding such problems, even in factories and laboratories which are not so well equipped. Prevention at Nestlé is based on several pillars. For a number of years, a sensory panel at the central laboratory has been specialized in and trained on packaging off-favours. The panel can describe and identify odours and their origin. To confirm the results by instrumental analysis, various extraction and separation techniques are available, including distillation/extraction techniques and direct thermal desorption followed by gas chromatography coupled with mass spectroscopy and an olfactory sniffing port. However, this knowledge must also be present in the operational plants where the problem usually originates. To manage this knowledge transfer, two tools were introduced to build up sensory panels that can evaluate packaging material. First, an aroma library kit was developed that contained odours that are often involved in off-odour cases. For each odour, a typical descriptor and the chemical composition are given. Beside that, information is added about the occurrence. Second, a glossary, which contains descriptors for packaging-related off-odours, was published

  12. APPLICATION OF POLYURETHANE FOAM FOR IMPACT ABSORPTION AND THERMAL INSULATION FOR RADIOACTIVE MATERIALS PACKAGINGS.

    SciTech Connect

    Smith, A; Glenn Abramczyk, G; Paul Blanton, P

    2007-05-15

    Polyurethane foam has been widely used as an impact absorbing and thermal insulating material for large radioactive materials packages, since the 1980's. With the adoption of the regulatory crush test requirement, for smaller packages, polyurethane foam has been adopted as a replacement for cane fiberboard, because of its ability to withstand the crush test. Polyurethane foam is an engineered material whose composition is much more closely controlled than that of cane fiberboard. In addition, the properties of the foam can be controlled by controlling the density of the foam. The conditions under which the foam is formed, whether confined ormore » unconfined have an affect on foam properties. The study reported here reviewed the application of polyurethane foam in RAM packagings and compared property values reported in the literature with published property values and test results for foam specimens taken from a prototype 9977 packaging. The study confirmed that, polyurethane foam behaves in a predictable and consistent manner and fully satisfies the functional requirements for impact absorption and thermal insulation.« less

  13. Comparison of flavour qualities of mushrooms (Flammulina velutipes) packed with different packaging materials.

    PubMed

    Donglu, Fang; Wenjian, Yang; Kimatu, Benard Muinde; Liyan, Zhao; Xinxin, An; Qiuhui, Hu

    2017-10-01

    To clarify the dynamic changes of flavour components in mushrooms packed with different packaging materials during storage, comprehensive flavour characterization, non-volatile and volatile compounds of Flammulina velutipes were evaluated using electronic nose (E-nose), electronic tongue (E-tongue) technology and headspace solid phase micro-extraction combined with gas chromatography-mass spectrometry (HS-SPME-GC-MS), respectively. Results showed that volatile compounds of fresh F. velutipes mainly consisted of ketones and alcohols, with 3-octanone being the predominant compound. After storage, volatile components significantly changed in mushrooms packed with normal packaging material (Normal-PM) according to the GC-MS analysis and radar fingerprint chart of electronic nose. The ethanol accumulation was inhibited by nanocomposite packaging materials (Nano-PM). Besides, both radar graph and PCA of E-tongue signals could differentiate the samples from different packaging and storage time. In general, these results may provide a profile of flavour substances and explain mechanism of flavour changes in F. velutipes over storage period. Copyright © 2017. Published by Elsevier Ltd.

  14. Physical test report to drop test of a 9975 radioactive material shipping packaging

    SciTech Connect

    Blanton, P.S.

    1997-11-11

    This report presents the drop test results for the 9975 radioactive material shipping package being dropped 30 feet onto a unyielding surface followed by a 40-inch puncture pin drop. The purpose of these drops was to show that the package lid would remain attached to the drum. The 30-foot drop was designed to weaken the lid closure lug while still maintaining maximum extension of the lugs from the drum surface. This was accomplished by angling the drum approximately 30 degrees from horizontal in an inverted position. In this position, the drum was rotated slightly so as not to embed themore » closure lugs into the drum as a result of the 30-foot drop. It was determined that this orientation would maximize deformation to the closure ring around the closure lug while still maintaining the extension of the lugs from the package surface. The second drop was from 40 inches above a 40-inch tall 6-inch diameter puncture pin. The package was angled 10 degrees from vertical and aligned over the puncture pin to solidly hit the drum lug(s) in an attempt to disengage the lid when dropped.Tests were performed in response to DOE EM-76 review Q5 inquires that questioned the capability of the 9975 drum lid to remain in place under this test sequence. Two packages were dropped utilizing this sequence, a 9974 and 9975. Test results for the 9974 package are reported in WSRC-RP-97-00945. A series of 40-inch puncture pin tests were also performed on undamaged 9975 and 9974 packages.« less

  15. 21 CFR 570.13 - Indirect food additives resulting from packaging materials prior sanctioned for animal feed and...

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Indirect food additives resulting from packaging materials prior sanctioned for animal feed and pet food. 570.13 Section 570.13 Food and Drugs FOOD AND DRUG... FOOD ADDITIVES General Provisions § 570.13 Indirect food additives resulting from packaging materials...

  16. 21 CFR 570.13 - Indirect food additives resulting from packaging materials prior sanctioned for animal feed and...

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Indirect food additives resulting from packaging materials prior sanctioned for animal feed and pet food. 570.13 Section 570.13 Food and Drugs FOOD AND DRUG... FOOD ADDITIVES General Provisions § 570.13 Indirect food additives resulting from packaging materials...

  17. 21 CFR 570.13 - Indirect food additives resulting from packaging materials prior sanctioned for animal feed and...

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Indirect food additives resulting from packaging materials prior sanctioned for animal feed and pet food. 570.13 Section 570.13 Food and Drugs FOOD AND DRUG... FOOD ADDITIVES General Provisions § 570.13 Indirect food additives resulting from packaging materials...

  18. 21 CFR 570.13 - Indirect food additives resulting from packaging materials prior sanctioned for animal feed and...

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Indirect food additives resulting from packaging materials prior sanctioned for animal feed and pet food. 570.13 Section 570.13 Food and Drugs FOOD AND DRUG... FOOD ADDITIVES General Provisions § 570.13 Indirect food additives resulting from packaging materials...

  19. 21 CFR 570.13 - Indirect food additives resulting from packaging materials prior sanctioned for animal feed and...

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... materials prior sanctioned for animal feed and pet food. 570.13 Section 570.13 Food and Drugs FOOD AND DRUG... prior sanctioned for animal feed and pet food. Regulations providing for the use of food packaging... packaging materials used for animal feed and pet food. [42 FR 14091, Mar. 15, 1977] ...

  20. Benzophenone in cartonboard packaging materials and the factors that influence its migration into food.

    PubMed

    Anderson, W A C; Castle, L

    2003-06-01

    Benzophenone may be present in cartonboard food-packaging materials as a residue from UV-cured inks and lacquers used to print on the packaging. It may also be present if the cartonboard is made from recycled fibres recovered from printed materials. A method has been devised to test for benzophenone in cartonboard packaging materials and to test for migration levels in foodstuffs. Packaging is extracted with solvent containing d10-benzophenone as the internal standard. Foods are extracted with solvent containing d10-benzophenone and the extract defatted using hexane. The extracts are analysed by GC-MS. For analysis of food, the limit of detection was 0.01 mg x kg(-1) and the limit of quantification was 0.05 mg x kg(-1). The calibration was linear from 0.05 to 20 mg x kg(-1). The method for food analysis was validated in-house and it also returned satisfactory results in a blind check-sample exercise organized by an independent laboratory. The methods were applied to the analysis of 350 retail samples that used printed cartonboard packaging. A total of 207 (59%) packaging samples had no significant benzophenone (<0.05 mg x dm(-2)). Seven (2%) were in the range 0.05- 0.2 mg x dm(-2), 60 (17%) were from 0.2 to 0.8 mg x dm(-2) and 76 (22%) were from 0.8 to 3.3 mg x dm(-2). A total of 71 samples were then selected at random from the 143 packaging samples that contained benzophenone, and the food itself was analysed. Benzophenone was detected in 51 (72%) of the foods. Two food samples (3%) were in the range 0.01-0.05 mg kg(-1). A total of 29 (41%) were from 0.05 to 0.5 mg kg(-1), 17 (24%) were from 0.5 to 5 mg x kg(-1) and three (4%) food samples exceeded 5 mg x kg(-1). The highest level of benzophenone in food was 7.3 mg x kg(-1) for a high-fat chocolate confectionery product packaged in direct contact with cartonboard, with room temperature storage conditions and with a high contact area:food mass ratio. When the mass fraction of benzophenone migration was calculated

  1. Design of shipping packages to transport varying radioisotopic source materials for future space and terrestrial missions

    NASA Astrophysics Data System (ADS)

    Barklay, Chadwick D.

    1995-01-01

    Mankind must continue to explore the universe in order to gain a better understanding of how we relate to it and how we can best use its resources to our benefit. This exploration will begin with manned missions to the moon and to Mars, first for scientific discoveries, then for mining and manufacturing. Because of the great financial costs of this type of exploration, it can only be accomplished through an international team effort. This unified effort must include the design, planning and, execution phases of future space missions, extending down to such activities as isotope processing, and shipping package design, fabrication, and certification. All aspects of this effort potentially involve the use of radioisotopes in some capacity, and the transportation of these radioisotopes will be impossible without a shipping package that is certified by the Nuclear Regulatory Commission or the U.S. Department of Energy for domestic shipments, and the U.S. Department of Transportation or the International Atomic Energy Agency for international shipments. To remain without the international regulatory constraints, and still support the needs of new and challenging space missions conducted within ever-shrinking budgets, shipping package concepts must be innovative. A shipping package must also be versatile enough to be reconfigured to transport the varying radioisotopic source materials that may be required to support future space and terrestrial missions. One such package is the Mound USA/9516/B(U)F. Taking into consideration the potential need to transport specific types of radioisotopes, approximations of dose rates at specific distances were determined taking into account the attenuation of dose rate with distance for varying radioisotopic source materials. As a result, it has been determined that the shipping package requirements that will be demanded by future space (and terrestrial) missions can be met by making minor modifications to the USA/9516/B(U)F.

  2. 500 C Electronic Packaging and Dielectric Materials for High Temperature Applications

    NASA Technical Reports Server (NTRS)

    Chen, Liang-yu; Neudeck, Philip G.; Spry, David J.; Beheim, Glenn M.; Hunter, Gary W.

    2016-01-01

    High-temperature environment operable sensors and electronics are required for exploring the inner solar planets and distributed control of next generation aeronautical engines. Various silicon carbide (SiC) high temperature sensors, actuators, and electronics have been demonstrated at and above 500C. A compatible packaging system is essential for long-term testing and application of high temperature electronics and sensors. High temperature passive components are also necessary for high temperature electronic systems. This talk will discuss ceramic packaging systems developed for high temperature electronics, and related testing results of SiC circuits at 500C and silicon-on-insulator (SOI) integrated circuits at temperatures beyond commercial limit facilitated by these high temperature packaging technologies. Dielectric materials for high temperature multilayers capacitors will also be discussed. High-temperature environment operable sensors and electronics are required for probing the inner solar planets and distributed control of next generation aeronautical engines. Various silicon carbide (SiC) high temperature sensors, actuators, and electronics have been demonstrated at and above 500C. A compatible packaging system is essential for long-term testing and eventual applications of high temperature electronics and sensors. High temperature passive components are also necessary for high temperature electronic systems. This talk will discuss ceramic packaging systems developed for high electronics and related testing results of SiC circuits at 500C and silicon-on-insulator (SOI) integrated circuits at temperatures beyond commercial limit facilitated by high temperature packaging technologies. Dielectric materials for high temperature multilayers capacitors will also be discussed.

  3. INVESTIGATION OF THE PRESENCE OF DRUGSTORE BEETLES WITHIN CELOTEX ASSEMBLIES IN RADIOACTIVE MATERIAL PACKAGINGS

    SciTech Connect

    Loftin, B; Glenn Abramczyk, G

    2008-06-04

    During normal operations at the Department of Energy's Hanford Site in Hanford, WA, drugstore beetles, (Stegobium paniceum (L.) Coleoptera: Anobiidae), were found within the fiberboard subassemblies of two 9975 Shipping Packages. Initial indications were that the beetles were feeding on the Celotex{trademark} assemblies within the package. Celotex{trademark} fiberboard is used in numerous radioactive material packages serving as both a thermal insulator and an impact absorber for both normal conditions of transport and hypothetical accident conditions. The Department of Energy's Packaging Certification Program (EM-63) directed a thorough investigation to determine if the drugstore beetles were causing damage that would be detrimentalmore » to the safety performance of the Celotex{trademark}. The Savannah River National Laboratory is conducting the investigation with entomological expertise provided by Clemson University. The two empty 9975 shipping packages were transferred to the Savannah River National Laboratory in the fall of 2007. This paper will provide details and results of the ongoing investigation.« less

  4. Investigation of migrant-polymer interaction in pharmaceutical packaging material using the linear interaction energy algorithm.

    PubMed

    Feenstra, Peter; Brunsteiner, Michael; Khinast, Johannes

    2014-10-01

    The interaction between drug products and polymeric packaging materials is an important topic in the pharmaceutical industry and often associated with high costs because of the required elaborative interaction studies. Therefore, a theoretical prediction of such interactions would be beneficial. Often, material parameters such as the octanol water partition coefficient are used to predict the partitioning of migrant molecules between a solvent and a polymeric packaging material. Here, we present the investigation of the partitioning of various migrant molecules between polymers and solvents using molecular dynamics simulations for the calculation of interaction energies. Our results show that the use of a model for the interaction between the migrant and the polymer at atomistic detail can yield significantly better results when predicting the polymer solvent partitioning than a model based on the octanol water partition coefficient. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association.

  5. Formative design and evaluation of patient-delivered partner therapy informational materials and packaging.

    PubMed

    McBride, K; Goldsworthy, R C; Fortenberry, J D

    2009-04-01

    To develop and evaluate instructional and packaging materials for patient-delivered partner therapy (PDPT). 64 patients participated from an urban US sexually transmitted infection (STI) clinic. The research comprised three phases: individual interviews to elicit attitudes and beliefs regarding PDPT and to assess the understanding of key STI-related concepts and terminology; the development and rapid validation of prototype instructional and packaging materials for PDPT and interviews to assess the effectiveness, acceptability and usability of the prototype materials. Thematic qualitative data analysis was used to examine interview responses. Participants were willing to deliver and receive PDPT and several potentially important related beliefs were identified. Participants indicated substantial unfamiliarity with words associated with STI treatment and some variability in definitions of sex partners. PDPT informational materials differentially affected participant willingness to receive (positively) and deliver (negatively) PDPT, positively influenced self-efficacy and understanding and were perceived as easy to use. PDPT creates complex challenges for education, motivation and communication. Issues such as appropriate vocabulary and interpersonal trust may be amplified when responsibility for a medical procedure-dispensation of treatment-is shifted to patients. STI PDPT implementation can be augmented with effective, high-quality informational and packaging materials; however, several challenges exist.

  6. Effect of packaging material on enological parameters and volatile compounds of dry white wine.

    PubMed

    Revi, M; Badeka, A; Kontakos, S; Kontominas, M G

    2014-01-01

    The enological parameters and volatile compounds of white wine packaged in dark coloured glass and two commercial bag-in-box (BIB) pouches (low density polyethylene - LDPE and ethylene vinyl acetate - EVA lined) were determined for a period of 6 months at 20 °C. Parameters monitored included: titratable acidity, volatile acidity, pH, total SO2, free SO2, colour, volatile compounds and sensory attributes. The BIB packaging materials affected the titratable acidity, total and free SO2 and colour of wine. A substantial portion of the wine aroma compounds was adsorbed by the plastic materials or lost to the environment through leakage of the valve fitment. Between the two plastics, the LDPE lined pouch showed a considerably higher aroma sorption as compared to EVA. Wine packaged in glass retained the largest portion of its aroma compounds. Sensory evaluation showed that white wine packaged in both plastics was of acceptable quality for 3 months vs. at least 6 months for that in glass bottles. Copyright © 2013 Elsevier Ltd. All rights reserved.

  7. Determination of perfluorinated compounds (PFCs) in various foodstuff packaging materials used in the Greek market.

    PubMed

    Zafeiraki, Effrosyni; Costopoulou, Danae; Vassiliadou, Irene; Bakeas, Evangelos; Leondiadis, Leondios

    2014-01-01

    Perfluorinated compounds (PFCs) are used in food packaging materials as coatings/additives for oil and moisture resistance. In the current study, foodstuff-packaging materials collected from the Greek market, made of paper, paperboard or aluminum foil were analyzed for the determination of PFCs. For the analysis of the samples, pressurized liquid extraction (PLE), liquid chromatography–tandem mass spectrometry (LC–MS/MS) and isotope dilution method were applied to develop a specific and sensitive method of analysis for the quantification of 12 PFCs: perfluorobutanoic acid (PFBA), perfluoropentanoic acid (PFPeA), perfluorohexanoic acid (PFHxA), perfluoroheptanoic acid (PFHpA), perfluorooctanoic acid (PFOA), perfluorononanoic acid (PFNA), perfluorodecanoic acid (PFDA), perfluoroundecanoic acid (PFUnDA), perfluorododecanoic acid (PFDoA), perfluorobutane sulfonate (PFBS), perfluorohexane sulfonate (PFHxS) and perfluorooctane sulfonate (PFOS) and the qualitative detection of 5 more: perfluorotridecanoic acid (PFTrDA), perfluorotetradecanoic acid (PFTeDA), perflyohexadecanoic acid (PFHxDA), perfluorooctadecanoic acid (PFODA) and perfluorodecane sulfonate (PFDS). No PFCs were quantified in aluminum foil wrappers, baking paper materials or beverage cups. PFTrDA, PFTeDA and PFHxDA were detected in fast food boxes. In the ice cream cup sample only PFHxA was found. On the other hand, several PFCs were quantified and detected in fast food wrappers, while the highest levels of PFCs were found in the microwave popcorn bag. PFOA and PFOS were not detected in any of the samples. Compared to other studies from different countries, very low concentrations of PFCs were detected in the packaging materials analyzed. Our results suggest that probably no serious danger for consumers’ health can be associated with PFCs contamination of packaging materials used in Greece.

  8. UPLC-Q-TOF-MS analysis of non-volatile migrants from new active packaging materials.

    PubMed

    Aznar, M; Rodriguez-Lafuente, A; Alfaro, P; Nerin, C

    2012-10-01

    Ultra-performance liquid chromatography (UPLC) coupled to mass spectrometry (MS) is a useful tool in the analysis of non-volatile compounds, and the use of a quadrupole-time-of-flight (Q-TOF) mass analyzer allows a high sensitivity and accuracy when acquiring full fragment mode, providing a high assurance of correct identification of unknown compounds. In this work, UPLC-Q-TOF-MS technology has been applied to the analysis of non-volatile migrants from new active packaging materials. The materials tested were based on polypropylene (PP), ethylene-vinyl alcohol copolymer (EVOH), and poly(ethylene terephthalate) (PET). The active packaging materials studied were one PP film containing a natural antioxidant, and two PP/EVOH films, two PET/EVOH films and one coextruded PP/EVOH/PP film containing natural antimicrobials. The chemical structure of several compounds was unequivocally identified. The analysis revealed the migration of some of the active substances used in the manufacture of active packaging, such as caffeine (0.07 ± 0.01 μg/g), carvacrol (0.31 ± 0.03 μg/g) and citral (0.20 ± 0.01 μg/g). Unintentionally added substances were also found, such as citral reaction compounds, or citral impurities present in the raw materials.

  9. Fungal mycelium and cotton plant materials in the manufacture of biodegradable molded packaging material: Evaluation study of select blends of cotton byproducts

    USDA-ARS?s Scientific Manuscript database

    The primary material used by the packaging industry is extruded polystyrene foam, which is commonly marketed as Styrofoam™. In its original formulation, Styrofoam™ is resistant to photolysis and effectively does not decompose. The light weight of Styrofoam™ packaging materials reduces the likelihood...

  10. Volatile compounds in fresh meats subjected to high pressure processing: Effect of the packaging material.

    PubMed

    Rivas-Cañedo, Ana; Fernández-García, Estrella; Nuñez, Manuel

    2009-02-01

    The effect of high pressure treatment (400MPa, 10min at 12°C) on the volatile profile of minced beef and chicken breast, packaged with or without aluminum foil in a multilayer polymeric bag, was investigated. The analysis of the volatile fraction was carried out by dynamic headspace extraction coupled to gas chromatography-mass spectrometry. Pressurization produced significant changes in the levels of some volatile compounds presumably coming from microbial activity. Some alcohols and aldehydes decreased, while other compounds, such as 2,3-butanedione and 2-butanone, were more abundant in high pressure processed meats. A significant migration of compounds from the plastic material was observed, mainly branched-chain alkanes and benzene compounds. Two functions built by the principal component analysis explained a high percentage of the variance and could be used to separate the samples into four distinct groups, according to high pressure treatment and packaging material.

  11. WannierTools: An open-source software package for novel topological materials

    NASA Astrophysics Data System (ADS)

    Wu, QuanSheng; Zhang, ShengNan; Song, Hai-Feng; Troyer, Matthias; Soluyanov, Alexey A.

    2018-03-01

    We present an open-source software package WannierTools, a tool for investigation of novel topological materials. This code works in the tight-binding framework, which can be generated by another software package Wannier90 (Mostofi et al., 2008). It can help to classify the topological phase of a given material by calculating the Wilson loop, and can get the surface state spectrum, which is detected by angle resolved photoemission (ARPES) and in scanning tunneling microscopy (STM) experiments. It also identifies positions of Weyl/Dirac points and nodal line structures, calculates the Berry phase around a closed momentum loop and Berry curvature in a part of the Brillouin zone (BZ).

  12. Poly-paper: a sustainable material for packaging, based on recycled paper and recyclable with paper.

    PubMed

    Del Curto, Barbara; Barelli, Nadia; Profaizer, Mauro; Farè, Silvia; Tanzi, Maria Cristina; Cigada, Alberto; Ognibene, Giulia; Recca, Giuseppe; Cicala, Gianluca

    2016-11-02

    Until now, environmental sustainability issues are almost entirely unsolved for packaging materials. With the final aim of finding materials with a single recycling channel, cellulose fiber/poly(vinyl)alcohol composites were investigated. After extrusion and injection molding, samples of composite with different cellulose fiber content (30%, 50% and 70% w/w) were tested. Tensile mechanical tests exhibited an improvement in composite stiffness when the reinforcement content was increased together with a decrease in composite elongation. Solubility tests performed at room temperature and 45°C showed different behavior depending on the water-resistant film applied on the composite (50% cellulose fiber content). In particular, the uncoated composite showed complete solubility after 2 hours, whereas at the same time point, no solubility occurred when a non-water-soluble varnish was used. The proposed composites, named Poly-paper, appear to warrant further investigation as highly sustainable packaging.

  13. MATERIALS COMPATIBILITY OF SNAP FUEL COMPONENTS DURING SHIPMENT IN 9975 PACKAGING

    SciTech Connect

    Vormelker, P

    2006-11-14

    Materials Science and Technology has evaluated materials compatibility for the SNAP (Systems for Nuclear Auxiliary Power) fuel for containment within a 9975 packaging assembly for a shipping period of one year. The evaluation included consideration for potential for water within the convenience can, corrosion from water, galvanic corrosion, tape degradation, and thermal expansion risk. Based on a review of existing literature and assumed conditions, corrosion and/or degradation of the 304 stainless steel (SS) Primary Containment Vessel (PCV) and the 304 stainless steel convenience cans containing the SNAP fuel is not significant to cause failure during the 1 year time shippingmore » period in the 9975 packaging assembly. However, storage beyond the 1 year shipping period has not been validated.« less

  14. Gas chromatographic-mass spectrometric analysis and subsequent quality improvement of plastic infusion packaging materials.

    PubMed

    Fekete, Z; Rófusz, T; Angyal, V; Szabó-Révész, P; Aigner, Z

    2014-08-01

    Although the opalescence of sterile transparent plastic materials utilized for the packaging of parenteral infusion drugs is a serious quality problem, most suppliers do not report the exact compositions of such polymers, and no literature data are available. Similarly, no information is available as concerns the potential incompatibility of the inner bag and the overpouch. Our gas chromatographic-mass spectrometric study revealed that the cause of the opalescence is the presence of a low-molecular-weight slip additive, 13-docosenamide (erucamide), which is transferred into the primary infusion bag from the overpouch during the heat-sterilization process. Autoclaving trials confirmed the analytical results. In view of these findings, a new slip additive-free overpouch has been produced as secondary packaging material, which does not give rise to opalescence. Copyright © 2014 Elsevier B.V. All rights reserved.

  15. Attachment of Asaia bogorensis originating in fruit-flavored water to packaging materials.

    PubMed

    Kregiel, Dorota; Otlewska, Anna; Antolak, Hubert

    2014-01-01

    The objective of this study was to investigate the adhesion of isolated spoilage bacteria to packaging materials used in the food industry. Microorganisms were isolated from commercial fruit-flavored mineral water in plastic bottles with flocks as a visual defect. The Gram-negative rods were identified using the molecular method through the amplification of a partial region of the 16S rRNA gene. Based on the sequence identity (99.6%) between the spoilage organism and a reference strain deposited in GenBank, the spoilage isolate was identified as Asaia bgorensis. Experiments on bacterial adhesion were conducted using plates made of glass and polystyrene (packaging materials commonly used in the beverage industry). Cell adhesion ability was determined using luminometry, plate count, and the microscopic method. The strain of A. bogorensis was characterized by strong adhesion properties which were dependent on the surface type, with the highest cell adhesion detected on polystyrene.

  16. Formaldehyde migration in aqueous extracts from paper and cardboard food packaging materials in Turkey.

    PubMed

    Dogan, Canan Ekinci; Sancı, Rukiye

    2015-01-01

    Migration of formaldehyde to aqueous extracts from paper and cardboard food packaging materials was determined by an ultraviolet visible-spectrophotometric method at 410 nm. Intraday and interday precision of the method, expressed as coefficient of variation, varied between 1.5 to 4.4% and 7 to 8.8%, respectively. The limit of quantification was 0.28 mg kg(-1) for formaldehyde in aqueous extracts. The recovery of the method was over 90% for two different concentration levels in aqueous extracts. The method was applied to the migration of formaldehyde to aqueous extracts from 31 different paper and cardboard materials collected from the packaging sector, intended for food contact, such as tea filters, hot water filters, paper pouches and folding boxes. The results were between limit of detection 0.23 mg/kg and 40 mg kg(-1) and were evaluated according to the relevant directives.

  17. Synthesis of Iminodiacetate Functionalized Polypropylene Films and Their Efficacy as Antioxidant Active-Packaging Materials.

    PubMed

    Lin, Zhuangsheng; Roman, Maxine J; Decker, Eric A; Goddard, Julie M

    2016-06-08

    The introduction of metal-chelating ligands to the food-contact surface of packaging materials may enable the removal of synthetic chelators (e.g., ethylenediamine tetra-acetic acid (EDTA)) from food products. In this study, the metal-chelating ligand iminodiacetate (IDA) was covalently grafted onto polypropylene surfaces to produce metal-chelating active-packaging films. The resulting films were able to chelate 138.1 ± 26 and 210.0 ± 28 nmol/cm(2) Fe(3+) and Cu(2+) ions, respectively, under acidic conditions (pH 3.0). The films demonstrated potent antioxidant efficacy in two model food systems. In an emulsified-oil system, the chelating materials extended the lag phase of both lipid hydroperoxide and hexanal formation from 5 to 25 days and were as effective as EDTA. The degradation half-life of ascorbic acid in an aqueous solution was extended from 5 to 14 days. This work demonstrates the potential application of surface-grafted chelating IDA ligands as effective antioxidant active food-packaging materials.

  18. Productivity Techniques and Quality Aspects in the Criticality Safety Evaluation of Y-12 Type-B Fissile Material Packages

    SciTech Connect

    DeClue, J. F.

    2011-06-28

    The inventory of certified Type-B fissile material packages consists of ten performance-based packages for offsite transportation purposes, serving transportation programs at the Y-12 National Security Complex. The containment vessels range from 5 to 19 in. in diameter and from 17 to 58 in. in height. The drum assembly external to the containment vessel ranges from 18 to 34 in. in diameter and from 26 to 71 in. in height. The weight of the packaging (drum assembly and containment vessel) ranges from 239 to 1550 lb. The older DT-nn series of Cellotex-based packages are being phased-out and replaced by a newmore » generation of Kaolite-based ('Y-12 patented insulation') packages capable of withstanding the dynamic crush test 10 CFR 71.73(c)(2). Three replacement packages are in various stages of development; two are in use. The U.S. Department of Transportation (DOT) 6M specification package, which does not conform to the U.S. Nuclear Regulatory Commission requirements for Type-B packages, is no longer authorized for service on public roads. The ES-3100 shipping package is an example of a Kaolite-based Type-B fissile material package developed as a replacement package for the DOT 6M. With expanded utility, the ES-3100 is designed and licensed for transporting highly enriched uranium and plutonium materials on public roads. The ES-3100 provides added capability for air transport of up to 7-kg quantities of uranium material. This paper presents the productivity techniques and quality aspects in the criticality safety evaluation of Y-12 packages using the ES-3100 as an example.« less

  19. Directory of Certificates of Compliance for radioactive materials packages: Report of NRC approved packages. Volume 1, Revision 18

    SciTech Connect

    NONE

    1995-10-01

    The purpose of this directory is to make available a convenient source of information on packagings which have been approved by the US Nuclear Regulatory Commission. To assist in identifying packaging, an index by Model Number and corresponding Certificate of Compliance Number is included at the front of Volumes 1 and 2. An alphabetical listing by user name is included in the back of Volume 3 of approved QA programs. The reports include a listing of all users of each package design and approved QA programs prior to the publication date.

  20. 21 CFR 570.14 - Indirect food additives resulting from packaging materials for animal feed and pet food.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Indirect food additives resulting from packaging..., DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS FOOD ADDITIVES General Provisions § 570.14 Indirect food additives resulting from packaging materials for animal feed and...

  1. 21 CFR 570.14 - Indirect food additives resulting from packaging materials for animal feed and pet food.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Indirect food additives resulting from packaging..., DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS FOOD ADDITIVES General Provisions § 570.14 Indirect food additives resulting from packaging materials for animal feed and...

  2. 21 CFR 570.14 - Indirect food additives resulting from packaging materials for animal feed and pet food.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Indirect food additives resulting from packaging..., DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS FOOD ADDITIVES General Provisions § 570.14 Indirect food additives resulting from packaging materials for animal feed and...

  3. 21 CFR 570.14 - Indirect food additives resulting from packaging materials for animal feed and pet food.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Indirect food additives resulting from packaging..., DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS FOOD ADDITIVES General Provisions § 570.14 Indirect food additives resulting from packaging materials for animal feed and...

  4. Development of more friendly food packaging materials base on polypropylene through blending with polylacticacid

    NASA Astrophysics Data System (ADS)

    Setiawan, Achmad Hanafi; Aulia, Fauzan

    2017-01-01

    The commonly food packaging materials today is used a thin layer plastic or film, which is made of a synthetic polymer, such as polypropylene (PP). However, the use of these polymers has a negative impact on the environment, because the synthetic polymer is difficult to degrade naturally by the biotic components such as micro-organisms decomposers and abiotic components such as the sunshine. The use of the biodegradable polymeric material will reduce the use of synthetic polymer products, thereby reducing plastic waste pollution at relatively low cost, it is expected to produce positive effects both for the environment and in terms of economy. PLA is a biodegradable polymer that can be substituted totally or partially to synthetic polymers as far as could fulfill the main function of packaging in the protection and preservation of food. Increasing PLA content in polypropylene blend will affect to the increasing in its water absorption and also its biodegradable. 20% PLA may the optimum composition of poly-blend for food packaging.

  5. Applications of nanotechnology in food packaging and food safety: barrier materials, antimicrobials and sensors.

    PubMed

    Duncan, Timothy V

    2011-11-01

    In this article, several applications of nanomaterials in food packaging and food safety are reviewed, including: polymer/clay nanocomposites as high barrier packaging materials, silver nanoparticles as potent antimicrobial agents, and nanosensors and nanomaterial-based assays for the detection of food-relevant analytes (gasses, small organic molecules and food-borne pathogens). In addition to covering the technical aspects of these topics, the current commercial status and understanding of health implications of these technologies are also discussed. These applications were chosen because they do not involve direct addition of nanoparticles to consumed foods, and thus are more likely to be marketed to the public in the short term. Published by Elsevier Inc.

  6. Packaging Technologies for 500 C SiC Electronics and Sensors: Challenges in Material Science and Technology

    NASA Technical Reports Server (NTRS)

    Chen, Liang-Yu; Neudeck, Philip G.; Behelm, Glenn M.; Spry, David J.; Meredith, Roger D.; Hunter, Gary W.

    2015-01-01

    This paper presents ceramic substrates and thick-film metallization based packaging technologies in development for 500C silicon carbide (SiC) electronics and sensors. Prototype high temperature ceramic chip-level packages and printed circuit boards (PCBs) based on ceramic substrates of aluminum oxide (Al2O3) and aluminum nitride (AlN) have been designed and fabricated. These ceramic substrate-based chip-level packages with gold (Au) thick-film metallization have been electrically characterized at temperatures up to 550C. The 96 alumina packaging system composed of chip-level packages and PCBs has been successfully tested with high temperature SiC discrete transistor devices at 500C for over 10,000 hours. In addition to tests in a laboratory environment, a SiC junction field-effect-transistor (JFET) with a packaging system composed of a 96 alumina chip-level package and an alumina printed circuit board was tested on low earth orbit for eighteen months via a NASA International Space Station experiment. In addition to packaging systems for electronics, a spark-plug type sensor package based on this high temperature interconnection system for high temperature SiC capacitive pressure sensors was also developed and tested. In order to further significantly improve the performance of packaging system for higher packaging density, higher operation frequency, power rating, and even higher temperatures, some fundamental material challenges must be addressed. This presentation will discuss previous development and some of the challenges in material science (technology) to improve high temperature dielectrics for packaging applications.

  7. Effect of Packaging Materials on Orthosiphon Stamineus Dried-Leaf Quality During Storage

    NASA Astrophysics Data System (ADS)

    Norawanis, A. R.; Shaari, A. R.; Leng, L. Y.

    2018-03-01

    The experiment was conducted to determine the effects on the total phenolic content, antioxidant capacity, moisture content and total different color (ΔE) when the O. stamineus dried whole-leaf were packed in different packaging materials (plastic bag, paper bag and glass container) and stored under room temperature (±25 °C) and relative humidity (±65 %RH) for 8 weeks. The total phenolic compounds and antioxidant activity were measured using the Folin-Ciocalteu method and 2,2-diphenyl-1-picrylhydrazyl (DPPH) free radical scavenging activity assay respectively, and analyzed using UV/VIS Spectrophotometer. The moisture content changes were examined using a moisture analyzer and the color changes were analyzed using colorimeter. The results showed that packing O. stamineus dried whole-leaf in different packaging materials significantly affected the herbal leaves quality. After 8 weeks of storage period, the total phenolic content and antioxidant capacity exhibited the increase values during storage. Meanwhile, the moisture content of the samples decreased by storage period for the samples packed in plastic bag and glass container. The moisture content of the samples packed in the paper bag fluctuated along the 8 weeks of storage period. The total different color (ΔE) of the O. stamineus dried whole-leaf increased by storage period. The highest changes of ΔE belonged to the samples packed in the glass container, followed by paper and plastic bags. The selection of the packaging materials can be considered as an important element to control the quality of raw herbal materials for further processing and the herbal finished products.

  8. Displacement imprinted polymer receptor analysis (DIPRA) for chlorophenolic contaminants in drinking water and packaging materials.

    PubMed

    Nicholls, C; Karim, K; Piletsky, S; Saini, S; Setford, S

    2006-01-15

    The preparation of a molecularly imprinted polymer (MIP) for pentachlorophenol is described together with two alternative reporter derivatives for use in a displacement imprinted polymer receptor analysis (DIPRA) format procedure. In this procedure, alternative reporter molecules were rebound to the synthetic receptor sites and their displacement by the target analyte was employed as the basis of a simple procedure for the measurement of chlorophenols in water and packaging material samples. Water samples were extracted using the standard procedure (EPA 528) and a detection limit of 0.5 microg l(-1) was achieved using the DIPRA detection method, with good agreement between the displacement technique and GC-ECD analysis. A variety of packaging materials, extracted using a buffered detergent solution were also analysed using the DIPRA procedure and showed good agreement with GC results. In addition, investigation of the cross-reactivity of a range of pesticides and materials commonly encountered in environmental analysis indicated the procedure gave good discrimination between pesticides bearing a chlorophenolic moiety and other materials. The procedure is considered highly suitable for use as a rapid field-test method or for incorporation into a test kit device.

  9. Safety by design of printed multilayer materials intended for food packaging.

    PubMed

    Domeño, Celia; Aznar, Margarita; Nerín, Cristina; Isella, Francesca; Fedeli, Mauro; Bosetti, Osvaldo

    2017-07-01

    Printing inks are commonly used in multilayer plastics materials used for food packaging, and compounds present in inks can migrate to the food either by diffusion through the multilayers or because of set-off phenomena. To avoid this problem, the right design of the packaging is crucial. This paper studies the safety by design of multilayer materials. First, the migration from four different multilayers manufactured using polyethylene terephthalate (PET), aluminium (Al) and polyethylene (PE) was determined. The structural differences among materials such as the presence of inks or lacquer coatings as well as the differences in layers position allowed the study of a safety-by-design approach. Sixty-nine different compounds were detected and identified; 49 of them were not included in the positive list of Regulation EU/10/2011 or in Swiss legislation and 15 belong to Cramer class III, which means that they have a theoretical high toxicity. Some of the compounds related to ink composition were pyrene, a compound commercially used to make dyes and dye precursors and the antioxidant Irganox 1300. The application of external lacquers decreased the concentration of some migrants but also brought the potential for new migrants coming from its composition. A final risk assessment of the material allowed evaluating food safety for different food simulants and confirm it.

  10. Are Sintered Silver Joints Ready for Use as Interconnect Material in Microelectronic Packaging?

    NASA Astrophysics Data System (ADS)

    Siow, Kim S.

    2014-04-01

    Silver (Ag) has been under development for use as interconnect material for power electronics packaging since the late 1980s. Despite its long development history, high thermal and electrical conductivities, and lead-free composition, sintered Ag technology has limited market penetration. This review sets out to explore what is required to make this technology more viable. This review also covers the origin of sintered Ag, the different types and application methods of sintered Ag pastes and laminates, and the long-term reliability of sintered Ag joints. Sintered Ag pastes are classified according to whether pressure is required for sintering and further classified according to their filler sizes. This review discusses the main methods of applying Ag pastes/laminates as die-attach materials and the related processing conditions. The long-term reliability of sintered Ag joints depends on the density of the sintered joint, selection of metallization or plating schemes, types of substrates, substrate roughness, formulation of Ag pastes/laminates, joint configurations (i.e., joint thicknesses and die sizes), and testing conditions. This paper identifies four challenges that must be overcome for the proliferation of sintered Ag technology: changes in materials formulation, the successful navigation of the complex patent landscape, the availability of production and inspection equipment, and the health concerns of Ag nanoparticles. This paper is expected to be useful to materials suppliers and semiconductor companies that are considering this technology for their future packages.

  11. Influence of some packaging materials and of natural tocopherols on the sensory properties of breakfast cereals.

    PubMed

    Paradiso, Vito M; Caponio, Francesco; Summo, Carmine; Gomes, Tommaso

    2014-04-01

    The combined effect of natural antioxidants and packaging materials on the quality decay of breakfast cereals during storage was evaluated. Corn flakes were produced on industrial scale, using different packages and adding natural tocopherols to the ingredients, and stored for 1 year. The samples were then submitted to sensory analysis and HS-solid phase microextraction/gas chromatography/mass spectrometry (SPME/GC/MS) analysis. The packaging had a significant influence on the sensory profile of the aged product: metallized polypropylene gave the highest levels of oxidation compounds and sensory defects. The sensory profile was improved using polypropylene and especially high-density polyethylene. Natural tocopherols reduced the sensory decay of the flakes and the oxidative evolution of the volatile profile. They gave the most remarkable improvement in polypropylene (either metallized or not) packs. Polypropylene showed a barrier effect on the scalping of volatiles outside of the pack. This led to higher levels of oxidation volatiles and faster rates of the further oxidative processes involving the volatiles.

  12. Technological substitution: the potential of plastic as primary packaging material in the US brewing industry

    SciTech Connect

    Roeleveld, J.J.

    1985-01-01

    This dissertation develops a general model of technological substitution that could be of help to planners and decision makers in industry who are faced with the problems created by continual technological change. The model as presented differs from existing models in the theoretical literature because of its emphasis on analyzing current and potential technologies in an attempt to understand the underlying factors contributing to technological substitution. The general model and the cost model that is part of it belong to that step in the interactive planning cycle called the formulation of the mess. The methodology underlying the cost model ismore » a combination of life-cycle analysis (i.e., from raw materials in nature, through all intermediate products, to waste returned to the environment) and resoumetrics, which is an engineering approach to measuring all physical inputs required to produce a certain level of output. The models are illustrated with a specific field of interest: substitution of primary packaging technologies in the US brewing industry. The physical costs of packaging beer in different containers are compared. Strategic considerations for a brewery deciding to adopt plastic packaging technology are discussed. Attention is given to another potential fruitful application of the model in the field of technology transfer to developing countries.« less

  13. Biodegradation of PVP-CMC hydrogel film: a useful food packaging material.

    PubMed

    Roy, Niladri; Saha, Nabanita; Kitano, Takeshi; Saha, Petr

    2012-06-20

    Hydrogels can offer new opportunities for the design of efficient packaging materials with desirable properties (i.e. durability, biodegradability and mechanical strength). It is a promising and emerging concept, as most of the biopolymer based hydrogels are supposed to be biodegradable, they can be considered as alternative eco-friendly packaging materials. This article reports about synthetic (polyvinylpyrrolidone (PVP)) and biopolymer (carboxymethyl cellulose (CMC)) based a novel hydrogel film and its nature of biodegradability under controlled environmental condition. The dry hydrogel films were prepared by solution casting method and designated as 'PVP-CMC hydrogel films'. The hydrogel film containing PVP and CMC in a ratio of 20:80 shows best mechanical properties among all the test samples (i.e. 10:90, 20:80, 50:50, 80:20 and 90:10). Thus, PVP-CMC hydrogel film of 20:80 was considered as a useful food packaging material and further experiments were carried out with this particular hydrogel film. Biodegradation of the PVP-CMC hydrogel films were studied in liquid state (Czapec-Dox liquid medium+soil extracts) until 8 weeks. Variation in mechanical, viscoelastic properties and weight loss of the hydrogel films with time provide the direct evidence of biodegradation of the hydrogels. About 38% weight loss was observed within 8 weeks. FTIR spectra of the hydrogel films (before and after biodegradation) show shifts of the peaks and also change in the peak intensities, which refer to the physico-chemical change in the hydrogel structure and SEM views of the hydrogels show how internal structure of the PVP-CMC film changes in the course of biodegradation. Copyright © 2012 Elsevier Ltd. All rights reserved.

  14. Method of extruding and packaging a thin sample of reactive material, including forming the extrusion die

    DOEpatents

    Lewandowski, E.F.; Peterson, L.L.

    1981-11-30

    This invention teaches a method of cutting a narrow slot in an extrusion die with an electrical discharge machine by first drilling spaced holes at the ends of where the slot will be, whereby the oil can flow through the holes and slot to flush the material eroded away as the slot is being cut. The invention further teaches a method of extruding a very thin ribbon of solid highly reactive material such as lithium or sodium through the die in an inert atmosphere of nitrogen, argon, or the like as in a glovebox. The invention further teaches a method of stamping out sample discs from the ribbon and of packaging each disc by sandwiching it between two aluminum sheets and cold welding the sheets together along an annular seam beyond the outer periphery of the disc. This provides a sample of high purity reactive material that can have a long shelf life.

  15. Method of extruding and packaging a thin sample of reactive material including forming the extrusion die

    DOEpatents

    Lewandowski, Edward F.; Peterson, Leroy L.

    1985-01-01

    This invention teaches a method of cutting a narrow slot in an extrusion die with an electrical discharge machine by first drilling spaced holes at the ends of where the slot will be, whereby the oil can flow through the holes and slot to flush the material eroded away as the slot is being cut. The invention further teaches a method of extruding a very thin ribbon of solid highly reactive material such as lithium or sodium through the die in an inert atmosphere of nitrogen, argon or the like as in a glovebox. The invention further teaches a method of stamping out sample discs from the ribbon and of packaging each disc by sandwiching it between two aluminum sheets and cold welding the sheets together along an annular seam beyond the outer periphery of the disc. This provides a sample of high purity reactive material that can have a long shelf life.

  16. Migration of nanoparticles from plastic packaging materials containing carbon black into foodstuffs

    PubMed Central

    Bott, Johannes; Störmer, Angela; Franz, Roland

    2014-01-01

    Carbon black was investigated to assess and quantify the possibility that nanoparticles might migrate out of plastic materials used in the food packaging industry. Two types of carbon black were incorporated in low-density polyethylene (LDPE) and polystyrene (PS) at 2.5% and 5.0% loading (w/w), and then subjected to migration studies. The samples were exposed to different food simulants according to European Union Plastics Regulation 10/2011, simulating long-term storage with aqueous and fatty foodstuffs. Asymmetric flow field-flow fractionation (AF4) coupled to a multi-angle laser light-scattering (MALLS) detector was used to separate, characterise and quantify the potential release of nanoparticles. The AF4 method was successful in differentiating carbon black from other matrix components, such as extracted polymer chains, in the migration solution. At a detection limit of 12 µg kg−1, carbon black did not migrate from the packaging material into food simulants. The experimental findings are in agreement with theoretical considerations based on migration modelling. From both the experimental findings and theoretical considerations, it can be concluded that carbon black does not migrate into food once it is incorporated into a plastics food contact material. PMID:25105506

  17. Migration of nanoparticles from plastic packaging materials containing carbon black into foodstuffs.

    PubMed

    Bott, Johannes; Störmer, Angela; Franz, Roland

    2014-01-01

    Carbon black was investigated to assess and quantify the possibility that nanoparticles might migrate out of plastic materials used in the food packaging industry. Two types of carbon black were incorporated in low-density polyethylene (LDPE) and polystyrene (PS) at 2.5% and 5.0% loading (w/w), and then subjected to migration studies. The samples were exposed to different food simulants according to European Union Plastics Regulation 10/2011, simulating long-term storage with aqueous and fatty foodstuffs. Asymmetric flow field-flow fractionation (AF4) coupled to a multi-angle laser light-scattering (MALLS) detector was used to separate, characterise and quantify the potential release of nanoparticles. The AF4 method was successful in differentiating carbon black from other matrix components, such as extracted polymer chains, in the migration solution. At a detection limit of 12 µg kg⁻¹, carbon black did not migrate from the packaging material into food simulants. The experimental findings are in agreement with theoretical considerations based on migration modelling. From both the experimental findings and theoretical considerations, it can be concluded that carbon black does not migrate into food once it is incorporated into a plastics food contact material.

  18. Supercritical impregnation of cinnamaldehyde into polylactic acid as a route to develop antibacterial food packaging materials.

    PubMed

    Villegas, Carolina; Torres, Alejandra; Rios, Mauricio; Rojas, Adrián; Romero, Julio; de Dicastillo, Carol López; Valenzuela, Ximena; Galotto, María José; Guarda, Abel

    2017-09-01

    Supercritical impregnation was used to incorporate a natural compound with antibacterial activity into biopolymer-based films to develop active food packaging materials. Impregnation tests were carried out under two pressure conditions (9 and 12MPa), and three depressurization rates (0.1, 1 and 10MPamin -1 ) in a high-pressure cell at a constant temperature equal to 40°C. Cinnamaldehyde (Ci), a natural compound with proven antimicrobial activity, was successfully incorporated into poly(lactic acid) films (PLA) using supercritical carbon dioxide (scCO 2 ), with impregnation yields ranging from 8 to 13% w/w. Higher pressure and slower depressurization rate seem to favor the Ci impregnation. The incorporation of Ci improved thermal, structural and mechanical properties of the PLA films. Impregnated films were more flexible, less brittle and more resistant materials than neat PLA films. The tested samples showed strong antibacterial activity against the selected microorganisms. In summary, this study provides an innovative route to the development of antibacterial biodegradable materials, which could be used in a wide range of applications of active food packaging. Copyright © 2017 Elsevier Ltd. All rights reserved.

  19. Effects of ionizing radiation on properties of monolayer and multilayer flexible food packaging materials

    NASA Astrophysics Data System (ADS)

    Riganakos, K. A.; Koller, W. D.; Ehlermann, D. A. E.; Bauer, B.; Kontominas, M. G.

    1999-05-01

    Volatile compounds produced in flexible food packaging materials (LDPE, EVAc, PET/PE/EVOH/PE) during electron beam irradiation were isolated by purge and trap technique and identified by combined gas chromatography-mass spectrometry (GC/MS), after thermal desorption and concentration. For comparison purposes non-irradiated films were also studied. Film samples were irradiated at low (5 kGy, corresponding to cold pasteurization), intermediate (20 kGy, corresponding to cold sterilization) and high (100 kGy) doses. It was observed that a number of volatile compounds are produced after irradiation in all cases. Furthermore the amounts of all volatile compounds increase with increasing irradiation dose. Both primary (methyl-derivatives etc.) as well as secondary i.e. oxidation products (ketones, aldehydes, alcohols, carboxylic acids etc.) are produced upon irradiation. These products may affect organoleptic properties and thus shelf-life of prepackaged irradiated foods. No significant changes were observed in the structure of polymer matrices as exhibited by IR spectra after irradiation of the materials at doses tested. Likewise, no significant changes were observed in O 2, H 2O and CO 2 permeability values of plastic packaging materials after irradiation.

  20. Study of silicone-based materials for the packaging of optoelectronic devices

    NASA Astrophysics Data System (ADS)

    Lin, Yeong-Her

    The first part of this work is to evaluate the main materials used for the packaging of high power light-emitting diodes (LEDs), i.e., the die attach materials, the encapsulant materials, and high color rendering index(CRI) sol-gel composite materials. All of these materials had been discussed the performance, reliability, and issues in high power LED packages. High power white LEDs are created either from blue or near-ultraviolet chips encapsulated with a yellow phosphor, or from red-green-blue LED light mixing systems. The phosphor excited by blue LED chip was mostly used in experiment of this dissertation. The die attach materials contains filler particles possessing a maximum particle size less than 1.5 mum in diameter blended with epoxy polymer matrix. Such compositions enable thin bond line thickness, which decreases thermal resistance that exists between thermal interface materials and the corresponding mating surfaces. The thermal conductivity of nano silver die attach materials is relatively low, the thermal resistance from the junction to board is just 1.6 KW-1 in the bond line thickness of 5.3 mum, which is much lower than the thermal resistance using conventional die attach materials. The silicone die attach adhesive made in the lab cures through the free radical reaction of epoxy-functional organopolysiloxane and through the hydrosilylation reaction between alkenyl-functional organopolysiloxane and silicone-boned hydrogen-functional organopolysiloxane. By the combination of the free radical reaction and the hydrosilylation reaction, the low-molecular-weight silicone oil will not be out-migrated and not contaminate wire bondability to the LED chip and lead frame. Hence, the silicone die attach adhesive made in the lab can pass all reliability tests, such as operating life test JEDEC 85°C/85RH and room temperature operating life test. For LED encapsulating materials, most of commercial silicone encapsulants still suffer thermal/radiation induced

  1. 49 CFR 173.243 - Bulk packaging for certain high hazard liquids and dual hazard materials which pose a moderate...

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 2 2011-10-01 2011-10-01 false Bulk packaging for certain high hazard liquids and dual hazard materials which pose a moderate hazard. 173.243 Section 173.243 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS...

  2. Nano selenium as antioxidant agent in a multilayer food packaging material.

    PubMed

    Vera, Paula; Echegoyen, Yolanda; Canellas, Elena; Nerín, Cristina; Palomo, María; Madrid, Yolanda; Cámara, Carmen

    2016-09-01

    Selenium nanoparticles (SeNPs) were incorporated in a flexible multilayer plastic material using a water-base adhesive as vehicle for SeNPs. The antioxidant performance of the original solutions containing spherical SeNPs of 50-60 nm diameter, the adhesive containing these SeNPs, and the final multilayer plastic material to be used as food packaging were quantitatively measured. The radical scavenging capacity due to SeNPs was quantified by a free radical assay developed in the laboratory and by the diphenyl-1-picrylhydrazyl (DPPH) method. DPPH was not efficient to measure the scavenging capacity in the multilayer when the free radical scavenger is not in the surface in contact with it. Several multilayer laminated structures composed by [PET (20 m)-adhesive-LDPE (with variable thickness from 35 to 90 μm)] were prepared and measured, demonstrating for the first time that free radicals derived from oxygen (OH·, O2·, and O2H) cross the PE layer and arrive at the adhesive. SeNPs remain as such after manufacture and the final laminate is stable after 3 months of storage. The antioxidant multilayer is a non-migrating efficient free radical scavenger, able to protect the packaged product versus oxidation and extending the shelf life without being in direct contact with the product. Migration tests of both Se and SeNPs to simulants and hazelnuts demonstrated the non-migrating performance of this new active packaging. Graphical abstract ᅟ.

  3. Development of bio based plastic materials for packaging from soybeans waste

    NASA Astrophysics Data System (ADS)

    Muhammad, A.; Rashidi, A. R.; Roslan, A.; Idris, S. A.

    2017-09-01

    Demands of plastic material which increase with the increasing of human population encourage researchers to find alternative solution to replace petro based plastic. Thus, in the present study, a novel "green bioplastic" packaging was developed using soybean waste which is a major waste in soy sauce food industry. The evaluation of the effect of ratio of starch, soy waste and plasticizer in this bioplastic production was studied and their characteristics were compared with available bioplastics. Characteristics study was done in terms of burning test, water absorption capacity, thermal and tensile strength measurement and the result obtained were analyzed. The glass transition temperature (Tg) for soy waste bioplastic is 117˚C. The water absorption test shows that an increase in mass up to 114.17% which show large amount of water uptake capacity of this bioplastics. And about 38% of percentage loss was observed when compared with other novel bioplastics. The results clearly show that the amount of glycerol as a plasticizer had an inversely proportional relationship with the Glass Transition Temperature (Tg). The average maximum force value for tensile strength test is 6.71 N. The burning test show that the soy wastes bioplastic release a very faint smell of soy and glue-like substance. The flame ignited a Yellowish-Orange colour and released some sparks. Based on the overall results, soy-based have been proven to become an excellent bio-based packaging materials.

  4. Polypropylene Nanocomposites from Porous Clay Materials: Application in Ethylene Scavenger Packaging Films

    NASA Astrophysics Data System (ADS)

    Prakobna, Kasinee; Magaraphan, Rathanawan; Manuspiya, Hathaikarn

    2007-03-01

    The PCH is interesting material to use as entrapping system owing to its structure provides high surface area with uniform and specific pore size. In this work, the PCH is synthesized within the galleries of Na-bentonite clay by the polymerization of tetraethoxysilane (TEOS) in the presence of surfactant micelles (cetyltrimethylammonium bromide and dodecylamine). In addition, a mesoporous clay with hybrid organic-inorganic PCH (HPCH) is modified via co-condensation reaction of TEOS and methyltriethoxysilane (MTS). Before the preparation of PCHs and HPCHs, the Na-bentonite clay was adjusted pH into 9, 7, 5 and 3. Furthermore, both PCH and HPCH are utilized as ethylene scavenger and blended with polypropylene (PP) for producing ethylene scavenging films in food packaging application. The eight samples of nanocomposites films including PCH-9, 7, 5, 3 and HPCH-9, 7, 5, 3 (numerals denote the pH-adjusted condition of Na-bentonite clay) will be measured oxygen and ethylene permeabilities; however, the present results obtained from PCH-9 and HPCH-9 nanocomposites films revealed that both oxygen and ethylene permeabilities of these films were less than that of PP virgin film. So these materials could be found new application in active packaging.

  5. Halloysite Nanocapsules Containing Thyme Essential Oil: Preparation, Characterization, and Application in Packaging Materials.

    PubMed

    Jang, Si-Hoon; Jang, So-Ri; Lee, Gyeong-Min; Ryu, Jee-Hoon; Park, Su-Il; Park, No-Hyung

    2017-09-01

    Halloysite nanotubes (HNTs), which are natural nanomaterials, have a hollow tubular structure with about 15 nm inner and 50 nm outer diameters. Because of their tubular shape, HNTs loaded with various materials have been investigated as functional nanocapsules. In this study, thyme essential oil (TO) was encapsulated successfully in HNTs using vacuum pulling methods, followed by end-capping or a layer-by-layer surface coating process for complete encapsulation. Nanocapsules loaded with TO were mixed with flexographic ink and coated on a paper for applications as food packaging materials. Scanning electron microscopy and transmission electron microscopy were used to characterize the morphology of the nanocapsules and to confirm the TO loading of the nanocapsules. Fourier transform infrared spectroscopy and thermogravimetric analyses analysis were used to complement the structural information. In addition, the controlled release of TO from the nanocapsules showed sustained release properties over a period of many days. The results reveal that the release properties of TO in these nanocapsules could be controlled by surface modifications such as end-capping and/or surface coating of bare nanocapsules. The packaging paper with TO-loaded HNT capsules was effective in eliminating against Escherichia coli during the first 5 d and showed strong antibacterial activity for about 10 d. © 2017 Institute of Food Technologists®.

  6. [Study on influence of different storage environments and packaging materials on quality of Citri Reticulatae Pericarpium].

    PubMed

    Luo, Jiao-Yang; Zhou, Wen-Ju; Li, Kun-Lun; Zhao, Ming; Yang, Mei-Hua

    2018-03-01

    Traditional Chinese herbs are readily contaminated by mold that produced mycotoxins which are closly related to the herbs' external factors and external environments during the storage process. In this study, Citri Reticulatae Pericarpium was used as example, and the characteristics of traits, water content, active components (naringin, hesperidin, sinensetin, naringin, tangeretin) and the accumulation of aflatoxins (AFs) were selected as the evaluation indexes. Citri Reticulatae Pericarpium was stored under different environments and packaging materials for 12 months, and then the quality changes and mildew of Citri Reticulatae Pericarpium were examined. The results showed that the color of Citri Reticulatae Pericarpium was deepened after storage, but without mildew phenomenon. Besides, the sample storage in kraft paper and woven bags had varying degrees of moth phenomenon after 12 months storage, and the water content exceeded the limit of Chinese Pharmacopoeia. In addition, the contents of the five active constituents obviously decreased, especially for hesperidin, which did not meet the pharmacopoeia standard after storage. AFs were not detected in any of the tested samples. According to the results, we conclude that low temperature and humidity environment is more suitable for the storage of Citri Reticulatae Pericarpium, and that packaging materials should be further investigated. This study is of great significance for preventing the mold to contaminate the traditional Chinese medicine and ensuring the quality, effectiveness and safety of TCMs. Copyright© by the Chinese Pharmaceutical Association.

  7. Chitosan coatings onto polyethylene terephthalate for the development of potential active packaging material

    NASA Astrophysics Data System (ADS)

    Zemljič, Lidija Fras; Tkavc, Tina; Vesel, Alenka; Šauperl, Olivera

    2013-01-01

    In this paper advanced surface treatment of PET plastic film is presented for introduction of antimicrobial properties as a potential application for food (as for example meat) packaging material. Adsorption/desorption of chitosan onto PET plastic film surface was studied using several analytical techniques such as: X-Ray Photoelectron Spectroscopy (XPS), ATR-FTIR spectroscopy and titrations. Kinetic desorption of chitosan from PET surface was analysed by polyelectrolyte titration and spectrophotometric Ninhydrine reaction. Standard antimicrobial test ASTM E2149-01 was performed for functionalised PET materials in order to determine their antimicrobial properties; i. e. to measure the reductions of some of the meat pathogens; such as bacteria Salmonella enterica, Campylobacter spp., Escherichia coli, Listeria monocytogenes and fungi Candida albicans.

  8. Development of an antimicrobial material based on a nanocomposite cellulose acetate film for active food packaging.

    PubMed

    Rodríguez, Francisco J; Torres, Alejandra; Peñaloza, Ángela; Sepúlveda, Hugo; Galotto, María J; Guarda, Abel; Bruna, Julio

    2014-01-01

    Nanocomposites based on biopolymers have been recognised as potential materials for the development of new ecofriendly food packaging. In addition, if these materials incorporate active substances in their structure, the potential applications are much higher. Therefore, this work was oriented to develop nanocomposites with antimicrobial activity based on cellulose acetate (CA), a commercial organoclay Cloisite30B (C30B), thymol (T) as natural antimicrobial component and tri-ethyl citrate (TEC) as plasticiser. Nanocomposites were prepared by a solvent casting method and consisted of 5% (w/w) of C30B, 5% (w/w) of TEC and variable content of T (0%, 0.5% and 2% w/w). To evaluate the effect of C30B into the CA matrix, CA films without this organoclay but with T were also prepared. All nanocomposites showed the intercalation of CA into the organoclay structure; furthermore this intercalation was favoured when 2% (w/w) of T was added to the nanocomposite. In spite of the observed intercalation, the presence of C30B inside the CA matrices increased the opacity of the films significantly. On the other hand, T showed a plasticiser effect on the thermal properties of CA nanocomposites decreasing glass transition, melting temperature and melting enthalpy. The presence of T in CA nanocomposites also allowed the control de Listeria innocua growth when these materials were placed in contact with this Gram-positive bacterium. Interestingly, antimicrobial activity was increased with the presence of C30B. Finally, studies on T release showed that the clay structure inside the CA matrix did not affect its release rate; however, this nanofiller affected the partition coefficient KP/FS which was higher to CA nanocomposites films than in CA films without organoclay. The results obtained in the present study are really promising to be applied in the manufacture of food packaging materials.

  9. Rapid discrimination of plastic packaging materials using MIR spectroscopy coupled with independent components analysis (ICA)

    SciTech Connect

    Kassouf, Amine, E-mail: amine.kassouf@agroparistech.fr; INRA, UMR1145 Ingénierie Procédés Aliments, 1 Avenue des Olympiades, 91300 Massy; AgroParisTech, UMR1145 Ingénierie Procédés Aliments, 16 rue Claude Bernard, 75005 Paris

    2014-11-15

    Highlights: • An innovative technique, MIR-ICA, was applied to plastic packaging separation. • This study was carried out on PE, PP, PS, PET and PLA plastic packaging materials. • ICA was applied to discriminate plastics and 100% separation rates were obtained. • Analyses performed on two spectrometers proved the reproducibility of the method. • MIR-ICA is a simple and fast technique allowing plastic identification/classification. - Abstract: Plastic packaging wastes increased considerably in recent decades, raising a major and serious public concern on political, economical and environmental levels. Dealing with this kind of problems is generally done by landfilling and energymore » recovery. However, these two methods are becoming more and more expensive, hazardous to the public health and the environment. Therefore, recycling is gaining worldwide consideration as a solution to decrease the growing volume of plastic packaging wastes and simultaneously reduce the consumption of oil required to produce virgin resin. Nevertheless, a major shortage is encountered in recycling which is related to the sorting of plastic wastes. In this paper, a feasibility study was performed in order to test the potential of an innovative approach combining mid infrared (MIR) spectroscopy with independent components analysis (ICA), as a simple and fast approach which could achieve high separation rates. This approach (MIR-ICA) gave 100% discrimination rates in the separation of all studied plastics: polyethylene terephthalate (PET), polyethylene (PE), polypropylene (PP), polystyrene (PS) and polylactide (PLA). In addition, some more specific discriminations were obtained separating plastic materials belonging to the same polymer family e.g. high density polyethylene (HDPE) from low density polyethylene (LDPE). High discrimination rates were obtained despite the heterogeneity among samples especially differences in colors, thicknesses and surface textures. The

  10. Dielectric Spectroscopy Analysis of Aged EVOH films with Application to Deterioration of Food Packaging Materials

    NASA Astrophysics Data System (ADS)

    Hoeller, Timothy

    2007-06-01

    Samples of EVOH films from compositions of 29 - 44 mol% ethylene content were exposed to thermal aging with and without light exposure. The results of Dielectric Spectroscopy on select samples showed Cole-Cole plots of skewed dielectric constant indicating multiple distributions of dipole relaxation times. The onset for decreases in dielectric response occurs earlier in samples exposed to elevated temperature under light exposure. Lower permittivity is exhibited in samples of higher ethylene content. Results from heat exposed samples are presented. Colorimetric analysis indicates only a slight film yellowing in one case. Raman spectroscopy on untreated films discerns changes in the C-C-O stretch associated with the alcohol. The effects of aging on microstructure may cause hindrance of molecular motion from moisture desorption. Slight material degradation occurs from film hardening presumably due to crosslinking. An electrical circuit model of the conduction processes associated with the EVOH films is presented. Dielectric analysis shows promise for monitoring material changes related to deterioration. We are also using these methods to understand Fluorescence Imaging which has been recently released for paper and plastic materials analysis. Future work may include refinement of these techniques for identification of changes in material properties correlated to packaging material barrier resistance.

  11. Effect of γ-irradiation on commercial polypropylene based mono and multi-layered retortable food packaging materials

    NASA Astrophysics Data System (ADS)

    George, Johnsy; Kumar, R.; Sajeevkumar, V. A.; Sabapathy, S. N.; Vaijapurkar, S. G.; Kumar, D.; Kchawahha, A.; Bawa, A. S.

    2007-07-01

    Irradiation processing of food in the prepackaged form may affect chemical and physical properties of the plastic packaging materials. The effect of γ-irradiation doses (2.5-10.0 kGy) on polypropylene (PP)-based retortable food packaging materials, were investigated using Fourier transform infrared (FTIR) spectroscopic analysis, which revealed the changes happening to these materials after irradiation. The mechanical properties decreased with irradiation while oxygen transmission rate (OTR) was not affected significantly. Colour measurement indicated that Nylon 6 containing multilayer films became yellowish after irradiation. Thermal characterization revealed the changes in percentage crystallinity.

  12. 21 CFR 570.14 - Indirect food additives resulting from packaging materials for animal feed and pet food.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... materials for animal feed and pet food. 570.14 Section 570.14 Food and Drugs FOOD AND DRUG ADMINISTRATION... pet food. Regulations providing for the use of food packaging materials in parts 174 through 179 of... and pet food. [42 FR 14091, Mar. 15, 1977] ...

  13. Development of complementary HPLC-DAD/APCI MS methods for chemical characterization of pharmaceutical packaging materials.

    PubMed

    Petruševski, V; Jolevska, S T; Ribarska, J T; Chachorovska, M; Petkovska, A; Ugarković, S

    2016-05-30

    The chemical characterization of plastics for pharmaceutical packaging has been subject to ever increasing regulatory scrutiny, the reasons for which being: a) plastic additives and degradation products can be extremely hazardous to the patients' health (especially patients on chronic therapy) and b) they offer no therapeutic or formulatory benefit whatsoever. The last decade has seen the issuing of several books, monographs and guidelines dealing with extractables and leachables, however the amount of scientific work done so far is still fairly small (the majority of it performed by only a few research groups), with only a small number of methods published in the literature. This work focuses on developing a set of two complementary HPLC-DAD/APCI MS methods for simultaneous separation, detection, identification and quantification of a wide variety of packaging additives and degradants, the second method specifically targeting a group of compounds known as polymeric hindered amine light stabilizers (HALS), which are known to be notoriously difficult to separate and analyze with standard analytical techniques. The methods are capable of detecting plastic additives present in low ppb concentrations, from samples extracted in solvents with various polarities and pH values. Both methods were developed and optimized using system suitability mixtures comprised of 9 additives commonly encountered in plastic materials, and their practical applicability tested on a variety of extracts from low-density polyethylene (LDPE) and polypropylene (PP), where several additives were successfully separated, detected and identified. Copyright © 2016 Elsevier B.V. All rights reserved.

  14. Determination of partition behavior of organic surrogates between paperboard packaging materials and air.

    PubMed

    Triantafyllou, V I; Akrida-Demertzi, K; Demertzis, P G

    2005-06-03

    The suitability of recycled paperboard packaging materials for direct food contact applications is a major area of investigation. Chemical contaminants (surrogates) partitioning between recycled paper packaging and foods may affect the safety and health of the consumer. The partition behavior of all possible organic compounds between cardboards and individual foodstuffs is difficult and too time consuming for being fully investigated. Therefore it may be more efficient to determine these partition coefficients indirectly through experimental determination of the partitioning behavior between cardboard samples and air. In this work, the behavior of organic pollutants present in a set of two paper and board samples intended to be in contact with foods was studied. Adsorption isotherms have been plotted and partition coefficients between paper and air have been calculated as a basis for the estimation of their migration potential into food. Values of partition coefficients (Kpaper/air) from 47 to 1207 were obtained at different temperatures. For the less volatile surrogates such as dibutyl phthalate and methyl stearate higher Kpaper/air values were obtained. The adsorption curves showed that the more volatile substances are partitioning mainly in air phase and increasing the temperature from 70 to 100 degrees C their concentrations in air (Cair) have almost doubled. The analysis of surrogates was performed with a method based on solvent extraction and gas chromatographic-flame ionization detection (GC-FID) quantification.

  15. DEVELOPMENT AND TESTING OF THE BLANTON CLAMSHELL CLOSUREFOR USE ON RADIOACTIVE MATERIAL PACKAGING DRUMS

    SciTech Connect

    Blanton, P

    2007-10-18

    This paper provides a brief history of the U.S. Type B 6M specification container, its introduction into U.S. Code of federal regulations and its scheduled elimination three decades later. The paper also presents development, testing and deployment by the Department of Energy (DOE) of an enhanced drum closure called the 'Blanton Clamshell' (patent pending) that was designed to replace the standard open-head C-ring closure for the 55- and 85-gallon drums described in the 6M specification to extend their safe use. Nuclear Filter Technology has the Exclusive License for Clamshell production. Drum packages utilizing the standard C-ring closure have been amore » main-stay for over a half of a century in the national and international nuclear industry for shipping radioactive materials and will remain so in the foreseeable future. Drum package use in the U.S. increased heavily in the 1950's with development of the Weapons Complex and subsequently the commercial nuclear reactor industry.« less

  16. Analysis of phthalates in food products and packaging materials sold on the Belgian market.

    PubMed

    Fierens, T; Servaes, K; Van Holderbeke, M; Geerts, L; De Henauw, S; Sioen, I; Vanermen, G

    2012-07-01

    Phthalates are organic lipophilic compounds that are principally used as plasticiser to increase the flexibility of plastic polymers. Other applications are a.o. the use of phthalates in printing inks and lacquers. Human exposure to phthalates mainly occurs via food ingestion and can induce adverse health effects. In this study, the presence of eight phthalate compounds--dimethyl phthalate (DMP), diethyl phthalate (DEP), diisobutyl phthalate (DiBP), di-n-butyl phthalate (DnBP), benzylbutyl phthalate (BBP), di(2-ethylhexyl) phthalate (DEHP), dicyclohexyl phthalate (DCHP) and di-n-octyl phthalate (DnOP)--was investigated in 400 food products, divided over eleven groups, and packages sold on the Belgian market. For this purpose, suitable extraction techniques were developed and validated for four different matrices, namely high-fat foods, low-fat food products, aqueous-based beverages and packaging materials. The instrumental analysis was performed by means of gas chromatography-low resolution-mass spectrometry with electron impact ionisation (GC-EI-MS). A wide variety of phthalate concentrations was observed in the different groups. DEHP was found in the highest concentration in almost every group. Moreover, DEHP was the most abundant phthalate compound, followed by DiBP, DnBP and BBP. This survey is part of the PHTAL project, which is the first project that discusses phthalate contamination on the Belgian food market. Copyright © 2012 Elsevier Ltd. All rights reserved.

  17. Broadband Terahertz Refraction Index Dispersion and Loss of Polymeric Dielectric Substrate and Packaging Materials

    NASA Astrophysics Data System (ADS)

    Motaharifar, E.; Pierce, R. G.; Islam, R.; Henderson, R.; Hsu, J. W. P.; Lee, Mark

    2018-01-01

    In the effort to push the high-frequency performance of electronic circuits and signal interconnects from millimeter waves to beyond 1 THz, a quantitative knowledge of complex refraction index values and dispersion in potential dielectric substrate, encapsulation, waveguide, and packaging materials becomes critical. Here we present very broadband measurements of the real and imaginary index spectra of four polymeric dielectric materials considered for use in high-frequency electronics: benzocyclobutene (BCB), polyethylene naphthalate (PEN), the photoresist SU-8, and polydimethylsiloxane (PDMS). Reflectance and transmittance spectra from 3 to 75 THz were made using a Fourier transform spectrometer on freestanding material samples. These data were quantitatively analyzed, taking into account multiple partial reflections from front and back surfaces and molecular bond resonances, where applicable, to generate real and imaginary parts of the refraction index as a function of frequency. All materials showed signatures of infrared active organic molecular bond resonances between 10 and 50 THz. Low-loss transmission windows as well as anti-window bands of high dispersion and loss can be readily identified and incorporated into high-frequency design models.

  18. Utilization of biobased polymers in food packaging: Assessment of materials, production and commercialization

    USDA-ARS?s Scientific Manuscript database

    Food packaging contains and protects food, keeps it safe and secure, retains food quality and freshness, and increases shelf-life of food. Packaging should be affordable and biodegradable. Packaging is the core of the businesses of fast-foods, ready meals, on-the-go beverages, snacks and manufacture...

  19. Evaluation of performance indicators applied to a material recovery facility fed by mixed packaging waste.

    PubMed

    Mastellone, Maria Laura; Cremiato, Raffaele; Zaccariello, Lucio; Lotito, Roberta

    2017-06-01

    Most of the integrated systems for municipal solid waste management aim to increase the recycling of secondary materials by means of physical processes including sorting, shredding and reprocessing. Several restrictions prevent from reaching a very high material recycling efficiency: the variability of the composition of new-marketed materials used for packaging production and its shape and complexity are critical issues. The packaging goods are in fact made of different materials (aluminium, polymers, paper, etc.), possibly assembled, having different shape (flat, cylindrical, one-dimensional, etc.), density, colours, optical properties and so on. These aspects limit the effectiveness and efficiency of the sorting and reprocessing plants. The scope of this study was to evaluate the performance of a large scale Material Recovery Facility (MRF) by utilizing data collected during a long period of monitoring. The database resulted from the measured data has been organized in four sections: (1) data related to the amount and type of inlet waste; (2) amount and composition of output products and waste; (3) operating data (such as worked hours for shift, planned and unscheduled maintenance time, setting parameters of the equipment, and energy consumption for shift); (4) economic data (value of each product, disposal price for the produced waste, penalty for non-compliance of products and waste, etc.). A part of this database has been utilized to build an executive dashboard composed by a set of performance indicators suitable to measure the effectiveness and the efficiency of the MRF operations. The dashboard revealed itself as a powerful tool to support managers and engineers in their decisions in respect to the market demand or compliance regulation variation as well as in the designing of the lay-out improvements. The results indicated that the 40% of the input waste was recovered as valuable products and that a large part of these (88%) complied with the standards of

  20. Extractables characterization for five materials of construction representative of packaging systems used for parenteral and ophthalmic drug products.

    PubMed

    Jenke, Dennis; Castner, James; Egert, Thomas; Feinberg, Tom; Hendricker, Alan; Houston, Christopher; Hunt, Desmond G; Lynch, Michael; Shaw, Arthur; Nicholas, Kumudini; Norwood, Daniel L; Paskiet, Diane; Ruberto, Michael; Smith, Edward J; Holcomb, Frank

    2013-01-01

    Polymeric and elastomeric materials are commonly encountered in medical devices and packaging systems used to manufacture, store, deliver, and/or administer drug products. Characterizing extractables from such materials is a necessary step in establishing their suitability for use in these applications. In this study, five individual materials representative of polymers and elastomers commonly used in packaging systems and devices were extracted under conditions and with solvents that are relevant to parenteral and ophthalmic drug products (PODPs). Extraction methods included elevated temperature sealed vessel extraction, sonication, refluxing, and Soxhlet extraction. Extraction solvents included a low-pH (pH = 2.5) salt mixture, a high-pH (pH = 9.5) phosphate buffer, a 1/1 isopropanol/water mixture, isopropanol, and hexane. The resulting extracts were chemically characterized via spectroscopic and chromatographic means to establish the metal/trace element and organic extractables profiles. Additionally, the test articles themselves were tested for volatile organic substances. The results of this testing established the extractables profiles of the test articles, which are reported herein. Trends in the extractables, and their estimated concentrations, as a function of the extraction and testing methodologies are considered in the context of the use of the test article in medical applications and with respect to establishing best demonstrated practices for extractables profiling of materials used in PODP-related packaging systems and devices. Plastic and rubber materials are commonly encountered in medical devices and packaging/delivery systems for drug products. Characterizing the extractables from these materials is an important part of determining that they are suitable for use. In this study, five materials representative of plastics and rubbers used in packaging and medical devices were extracted by several means, and the extracts were analytically

  1. Pyrolysis behavior of different type of materials contained in the rejects of packaging waste sorting plants.

    PubMed

    Adrados, A; De Marco, I; Lopez-Urionabarrenechea, A; Caballero, B M; Laresgoiti, M F

    2013-01-01

    In this paper rejected streams coming from a waste packaging material recovery facility have been characterized and separated into families of products of similar nature in order to determine the influence of different types of ingredients in the products obtained in the pyrolysis process. The pyrolysis experiments have been carried out in a non-stirred batch 3.5 dm(3) reactor, swept with 1 L min(-1) N(2), at 500°C for 30 min. Pyrolysis liquids are composed of an organic phase and an aqueous phase. The aqueous phase is greater as higher is the cellulosic material content in the sample. The organic phase contains valuable chemicals as styrene, ethylbenzene and toluene, and has high heating value (HHV) (33-40 MJ kg(-1)). Therefore they could be used as alternative fuels for heat and power generation and as a source of valuable chemicals. Pyrolysis gases are mainly composed of hydrocarbons but contain high amounts of CO and CO(2); their HHV is in the range of 18-46 MJ kg(-1). The amount of COCO(2) increases, and consequently HHV decreases as higher is the cellulosic content of the waste. Pyrolysis solids are mainly composed of inorganics and char formed in the process. The cellulosic materials lower the quality of the pyrolysis liquids and gases, and increase the production of char. Copyright © 2012 Elsevier Ltd. All rights reserved.

  2. Shock-isolation material selection for electronic packages in hard-target environment

    SciTech Connect

    Stotts, Jarrett Eugene

    2016-11-01

    High velocity munitions and kinetic penetrators experience monumental external forces, impulses, and accelerations. The hard target environment is immensely taxing on sophisticated electronic components and recorders designed to retrieve valuable data related to the systems performance and characteristics in the periods of flight, impact, and post-impact. Such electronic systems have upper limits of overall shock intensity which, if exceeded, will either shorten the operating life of the parts or risk destruction resulting in loss of both the data and the principal value of the recorder. The focus of this project was to refine the categorization of leading material types formore » encapsulation and passive shock isolation and implement them in a method useable for a wide variety of environments. Namely, a design methodology capable of being tailored to the specific impact conditions to maximize the lively hood of sensitive electronics and the information recorded. The results of the study concluded that the materials observed under consistent dynamic high strain rate tests, which include Conathane® EN-4/9, Slygard®-184, and Stycast™-2651, behaved well in certain aspects of energy transmission and shock when considering the frequency environment or package coupled with the isolation material’s application. Key points about the implementation of the materials in extreme shock environments is discussed with the connection to energy analysis, loss attributes, and pulse transmissibility modeling. However, attempts to model the materials solely based on energy transmissibility in the frequency domain using only external experimental data and simplified boundary conditions was not found to be consistent with that acquired from the pressure bar experiments. Further work will include the addition of further material experimentation of the encapsulants in other frequency and temperature states, confined and pre-load boundary states, and composite constructions.« less

  3. Rapid discrimination of plastic packaging materials using MIR spectroscopy coupled with independent components analysis (ICA).

    PubMed

    Kassouf, Amine; Maalouly, Jacqueline; Rutledge, Douglas N; Chebib, Hanna; Ducruet, Violette

    2014-11-01

    Plastic packaging wastes increased considerably in recent decades, raising a major and serious public concern on political, economical and environmental levels. Dealing with this kind of problems is generally done by landfilling and energy recovery. However, these two methods are becoming more and more expensive, hazardous to the public health and the environment. Therefore, recycling is gaining worldwide consideration as a solution to decrease the growing volume of plastic packaging wastes and simultaneously reduce the consumption of oil required to produce virgin resin. Nevertheless, a major shortage is encountered in recycling which is related to the sorting of plastic wastes. In this paper, a feasibility study was performed in order to test the potential of an innovative approach combining mid infrared (MIR) spectroscopy with independent components analysis (ICA), as a simple and fast approach which could achieve high separation rates. This approach (MIR-ICA) gave 100% discrimination rates in the separation of all studied plastics: polyethylene terephthalate (PET), polyethylene (PE), polypropylene (PP), polystyrene (PS) and polylactide (PLA). In addition, some more specific discriminations were obtained separating plastic materials belonging to the same polymer family e.g. high density polyethylene (HDPE) from low density polyethylene (LDPE). High discrimination rates were obtained despite the heterogeneity among samples especially differences in colors, thicknesses and surface textures. The reproducibility of the proposed approach was also tested using two spectrometers with considerable differences in their sensitivities. Discrimination rates were not affected proving that the developed approach could be extrapolated to different spectrometers. MIR combined with ICA is a promising tool for plastic waste separation that can help improve performance in this field; however further technological improvements and developments are required before it can be applied

  4. The comparison of antimicrobial packaging properties with different applications incorporation method of active material

    NASA Astrophysics Data System (ADS)

    Anwar, R. W.; Sugiarto; Warsiki, E.

    2018-03-01

    Contamination after the processing of products during storage, distribution and marketing is one of the main causes of food safety issues. Handling of food products after processing can be done during the packaging process. Antimicrobial (AM) active packaging is one of the concept of packaging product development by utilize the interaction between the product and the packaging environment that can delay the bacterial damage by killing or reducing bacterial growth. The active system is formed by incorporating an antimicrobial agent against a packaging matrix that will function as a carrier. Many incorporation methods have been developed in this packaging-making concept which were direct mixing, polishing, and encapsulation. The aims of this research were to examine the different of the AM packaging performances including its stability and effectiveness of its function that would be produced by three different methods. The stability of the packaging function was analyzed by looking at the diffusivity of the active ingredient to the matrix using SEM. The effectiveness was analyzed by the ability of the packaging to prevent the growing of the microbial. The results showed that different incorporation methods resulted on different characteristics of the AM packaging.

  5. Mechanical and optical characterization of bio-nanocomposite from pineapple leaf fiber material for food packaging

    NASA Astrophysics Data System (ADS)

    Nikmatin, Siti; Rudwiyanti, Jerry R.; Prasetyo, Kurnia W.; Yedi, Dwi A.

    2015-01-01

    The utilization of Bio-nanocomposite material that was derived from pineapple leaf fiber as filler and tapioca starch with plasticizer glycerol as a matrix for food packaging can reduce the use of plastic that usually was made from petroleum materials. It is important to develop and producethis environmental friendly plastic because of limited availability of petroleum nowadays. The process of synthesize and characterization tapioca starch with the plasticizer glycerol bionanocomposites using print method had been conducted. There were 3 samples with different filler concentration variation; 3%, 4% and 5%.The results of mechanical test from each sample showed that bio-nanocomposite with 5% filler concentration was the optimum sample with 4.6320 MPa for tensile strength test and 24.87% for the elongation test. Based on the result of optical test for each sample was gained that along with the increasing of concentration filler would make the absorbance value of the sample became decreased, bio-nanocomposite with 5% filler concentration had several peaks with low absorbance values. The first peak was in 253 nm of wavelength regionwith absorbance of 0.131%, and the second peak was in 343 nmwavelength region and absorbance was 0.087%.

  6. 21 CFR 109.15 - Use of polychlorinated biphenyls (PCB's) in establishments manufacturing food-packaging materials.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... environmental stability and tendency to survive and be concentrated through the food chain. The judgment as to... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Use of polychlorinated biphenyls (PCB's) in establishments manufacturing food-packaging materials. 109.15 Section 109.15 Food and Drugs FOOD AND DRUG...

  7. 21 CFR 509.15 - Use of polychlorinated biphenyls (PCB's) in establishments manufacturing food-packaging materials.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... environmental stability and tendency to survive and be concentrated through the food chain. The judgment as to... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Use of polychlorinated biphenyls (PCB's) in establishments manufacturing food-packaging materials. 509.15 Section 509.15 Food and Drugs FOOD AND DRUG...

  8. 21 CFR 109.15 - Use of polychlorinated biphenyls (PCB's) in establishments manufacturing food-packaging materials.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... environmental stability and tendency to survive and be concentrated through the food chain. The judgment as to... 21 Food and Drugs 2 2012-04-01 2012-04-01 false Use of polychlorinated biphenyls (PCB's) in establishments manufacturing food-packaging materials. 109.15 Section 109.15 Food and Drugs FOOD AND DRUG...

  9. 21 CFR 509.15 - Use of polychlorinated biphenyls (PCB's) in establishments manufacturing food-packaging materials.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... environmental stability and tendency to survive and be concentrated through the food chain. The judgment as to... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Use of polychlorinated biphenyls (PCB's) in establishments manufacturing food-packaging materials. 509.15 Section 509.15 Food and Drugs FOOD AND DRUG...

  10. 21 CFR 109.15 - Use of polychlorinated biphenyls (PCB's) in establishments manufacturing food-packaging materials.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... environmental stability and tendency to survive and be concentrated through the food chain. The judgment as to... 21 Food and Drugs 2 2013-04-01 2013-04-01 false Use of polychlorinated biphenyls (PCB's) in establishments manufacturing food-packaging materials. 109.15 Section 109.15 Food and Drugs FOOD AND DRUG...

  11. 21 CFR 509.15 - Use of polychlorinated biphenyls (PCB's) in establishments manufacturing food-packaging materials.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... environmental stability and tendency to survive and be concentrated through the food chain. The judgment as to... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Use of polychlorinated biphenyls (PCB's) in establishments manufacturing food-packaging materials. 509.15 Section 509.15 Food and Drugs FOOD AND DRUG...

  12. 21 CFR 109.15 - Use of polychlorinated biphenyls (PCB's) in establishments manufacturing food-packaging materials.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... environmental stability and tendency to survive and be concentrated through the food chain. The judgment as to... 21 Food and Drugs 2 2014-04-01 2014-04-01 false Use of polychlorinated biphenyls (PCB's) in establishments manufacturing food-packaging materials. 109.15 Section 109.15 Food and Drugs FOOD AND DRUG...

  13. 21 CFR 509.15 - Use of polychlorinated biphenyls (PCB's) in establishments manufacturing food-packaging materials.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... environmental stability and tendency to survive and be concentrated through the food chain. The judgment as to... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Use of polychlorinated biphenyls (PCB's) in establishments manufacturing food-packaging materials. 509.15 Section 509.15 Food and Drugs FOOD AND DRUG...

  14. PATRAM '92: 10th international symposium on the packaging and transportation of radioactive materials [Papers presented by Sandia National Laboratories

    SciTech Connect

    None

    1992-01-01

    This document provides the papers presented by Sandia Laboratories at PATRAM '92, the tenth International symposium on the Packaging and Transportation of Radioactive Materials held September 13--18, 1992 in Yokohama City, Japan. Individual papers have been cataloged separately. (FL)

  15. An Analysis of U.S. Business Schools' Catalogs, Application Packages, and Program Materials from an International Perspective.

    ERIC Educational Resources Information Center

    Webb, Marion S.; Mayer, Kenneth R.; Pioche, Virginie

    1999-01-01

    Catalogs, application packages, and program materials from 106 business schools were analyzed to determine the degree of international coverage in business schools' curricula. Findings indicated a trend to require international functional courses, such as international finance, in the traditional Master in business administration programs and to…

  16. 49 CFR 175.706 - Separation distances for undeveloped film from packages containing Class 7 (radioactive) materials.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 2 2011-10-01 2011-10-01 false Separation distances for undeveloped film from... Classification of Material § 175.706 Separation distances for undeveloped film from packages containing Class 7... film. Transport index Minimum separation distance to nearest undeveloped film for various times in...

  17. 49 CFR 175.706 - Separation distances for undeveloped film from packages containing Class 7 (radioactive) materials.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 2 2012-10-01 2012-10-01 false Separation distances for undeveloped film from... Classification of Material § 175.706 Separation distances for undeveloped film from packages containing Class 7... film. Transport index Minimum separation distance to nearest undeveloped film for various times in...

  18. 49 CFR 175.706 - Separation distances for undeveloped film from packages containing Class 7 (radioactive) materials.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Separation distances for undeveloped film from... Classification of Material § 175.706 Separation distances for undeveloped film from packages containing Class 7... film. Transport index Minimum separation distance to nearest undeveloped film for various times in...

  19. 49 CFR 175.706 - Separation distances for undeveloped film from packages containing Class 7 (radioactive) materials.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 2 2013-10-01 2013-10-01 false Separation distances for undeveloped film from... Classification of Material § 175.706 Separation distances for undeveloped film from packages containing Class 7... film. Transport index Minimum separation distance to nearest undeveloped film for various times in...

  20. 49 CFR 175.706 - Separation distances for undeveloped film from packages containing Class 7 (radioactive) materials.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 2 2014-10-01 2014-10-01 false Separation distances for undeveloped film from... Classification of Material § 175.706 Separation distances for undeveloped film from packages containing Class 7... film. Transport index Minimum separation distance to nearest undeveloped film for various times in...

  1. 49 CFR 171.23 - Requirements for specific materials and packagings transported under the ICAO Technical...

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ..., an aerosol must be in a metal packaging when the packaging exceeds 7.22 cubic inches. (2) Air bag... containing natural uranium or thorium must conform to the requirements of §§ 173.421, 173.424, or 173.426 of...

  2. 48 CFR 552.211-89 - Non-manufactured wood packaging material for export.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ...://www.dla.mil/j-3/j-3311/DLAD/rev5.htm), and MIL-STD-2073-1, Standard Practice for Military Packaging...-1, and MIL-STD-2073-1. (f) Delays in delivery caused by non-complying pallets or wood package...

  3. 75 FR 27273 - Hazardous Materials; Packages Intended for Transport by Aircraft

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-05-14

    ... inner packaging, such as a glass bottle or plastic receptacle, is initially filled and sealed, the cap... Technical Instructions Packaging Provisions Currently under the HMR, stoppers, corks, or other such friction... proposing to revise Sec. 173.27(d) to clearly state that all friction and screw type closures must be...

  4. 48 CFR 552.211-89 - Non-manufactured wood packaging material for export.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ...://www.dla.mil/j-3/j-3311/DLAD/rev5.htm), and MIL-STD-2073-1, Standard Practice for Military Packaging...-1, and MIL-STD-2073-1. (f) Delays in delivery caused by non-complying pallets or wood package...

  5. Online Condition Monitoring of Bearings to Support Total Productive Maintenance in the Packaging Materials Industry

    PubMed Central

    Gligorijevic, Jovan; Gajic, Dragoljub; Brkovic, Aleksandar; Savic-Gajic, Ivana; Georgieva, Olga; Di Gennaro, Stefano

    2016-01-01

    The packaging materials industry has already recognized the importance of Total Productive Maintenance as a system of proactive techniques for improving equipment reliability. Bearing faults, which often occur gradually, represent one of the foremost causes of failures in the industry. Therefore, detection of their faults in an early stage is quite important to assure reliable and efficient operation. We present a new automated technique for early fault detection and diagnosis in rolling-element bearings based on vibration signal analysis. Following the wavelet decomposition of vibration signals into a few sub-bands of interest, the standard deviation of obtained wavelet coefficients is extracted as a representative feature. Then, the feature space dimension is optimally reduced to two using scatter matrices. In the reduced two-dimensional feature space the fault detection and diagnosis is carried out by quadratic classifiers. Accuracy of the technique has been tested on four classes of the recorded vibrations signals, i.e., normal, with the fault of inner race, outer race, and ball operation. The overall accuracy of 98.9% has been achieved. The new technique can be used to support maintenance decision-making processes and, thus, to increase reliability and efficiency in the industry by preventing unexpected faulty operation of bearings. PMID:26938541

  6. Contribution of aluminum from packaging materials and cooking utensils to the daily aluminum intake.

    PubMed

    Müller, J P; Steinegger, A; Schlatter, C

    1993-10-01

    Migration of aluminum (Al) from packaging materials and cooking utensils into foods and beverages was determined at intervals during cooking or during storage by graphite furnace atomic absorption spectroscopy. High amounts of Al migrated into acidic products such as mashed tomatoes during normal processing in normal, non-coated Al pans. After 60 min cooking an Al content of 10-15 mg/kg was measured in tomato sauce. Surprisingly, the Al concentration was also increased up to 2.6 mg/L after boiling tap water for 15 min in Al pans. Storage of Coca-Cola in internally lacquered Al cans resulted in Al levels below 0.25 mg/L. In contrast, non-coated Al camping bottles containing lime blossom tea acidified with lemon juice released up to 7 mg Al/L within 5 days. The Al concentration in coffee was lower than that of the tap water used in its preparation, even if prepared in Al heaters. In Switzerland, where most pans nowadays are made of stainless steel or teflon-coated Al, the average contribution for the use of Al utensils to the daily Al intake of 2-5 mg from the diet is estimated to be less than 0.1 mg.

  7. Inactivation of food pathogen Bacillus cereus by photosensitization in vitro and on the surface of packaging material.

    PubMed

    Luksiene, Z; Buchovec, I; Paskeviciute, E

    2009-12-01

    The study was focused on the possibility to inactivate food pathogen Bacillus cereus by 5-aminolevulinic acid (ALA) - based photosensitization in vitro and after adhesion on the surface of packaging material. Bacillus cereus was incubated with ALA (3-7.5 mmol l(-1)) for 5-60 min in different environment (PBS, packaging material and wheat grains) and afterwards illuminated with visible light. The light source used for illumination emitted light at lambda = 400 nm with energy density at the position of the cells, 20 mW cm(-2). The illumination time varied from 0 to 20 min, and subsequently a total energy dose was between 0 and 24 J cm(-2). The obtained results indicate that B. cereus after the incubation with 3-7.5 mmol l(-1) ALA produces suitable amounts of endogenous photosensitizers. Following illumination, micro-organism inactivated even by 6.3 log. The inactivation of B. cereus after adhesion on the surface of food packaging by photosensitization reached 4 log. It is important to note that spores of B. cereus were susceptible to this treatment as well; 3.7-log inactivation in vitro and 2.7-log inactivation on the surface of packaging material were achieved at certain experimental conditions. Vegetative cells and spores of Gram-positive food pathogen B. cereus were effectively inactivated by ALA-based photosensitization in vitro. Moreover, the significant inactivation of B. cereus adhered on the surface of packaging material was observed. It was shown that photosensitization-based inactivation of B. cereus depended on the total light dose (illumination time) as well as on the amount of endogenous porphyrins (initial ALA concentration, time of incubation with ALA). Our previous data, as well as the one obtained in this study, support the idea that photosensitization with its high selectivity, antimicrobial efficiency and nonthermal nature could serve in the future for the development of completely safe, nonthermal surface decontamination and food preservation

  8. Directory of Certificates of Compliance for radioactive materials packages: Certificates of Compliance. Volume 2, Revision 18

    SciTech Connect

    NONE

    1995-10-01

    The purpose of this directory is to make available a convenient source of information on packagings which have been approved by the US Nuclear Regulatory Commission. To assist in identifying packaging, an index by Model Number and corresponding Certificate of Compliance Number is included at the front of Volumes 1 and 2. An alphabetical listing by user name is included in the back of Volume 3 of approved QA programs. The reports include a listing of all users of each package design and approved QA programs prior to the publication date.

  9. 78 FR 48903 - Certain Products Having Laminated Packaging, Laminated Packaging, and Components Thereof...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-12

    ... Packaging, Laminated Packaging, and Components Thereof; Commission Decision To Review an Initial... complaint filed by Lamina Packaging Innovations, Inc. of Longview, Texas (``Lamina'') alleging a violation... subject products are certain laminated packaging materials, products packaged with such materials, and...

  10. 49 CFR 172.312 - Liquid hazardous materials in non-bulk packagings.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... correct upright direction. The arrows must be either black or red on white or other suitable contrasting... mercury in thermometers) which are leak-tight in all orientations. (5) A non-bulk package with...

  11. 49 CFR 172.312 - Liquid hazardous materials in non-bulk packagings.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... correct upright direction. The arrows must be either black or red on white or other suitable contrasting... mercury in thermometers) which are leak-tight in all orientations. (5) A non-bulk package with...

  12. 49 CFR 172.312 - Liquid hazardous materials in non-bulk packagings.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... correct upright direction. The arrows must be either black or red on white or other suitable contrasting... mercury in thermometers) which are leak-tight in all orientations. (5) A non-bulk package with...

  13. Greenhouse gas emissions from the treatment of household plastic containers and packaging: replacement with biomass-based materials.

    PubMed

    Yano, Junya; Hirai, Yasuhiro; Sakai, Shin-ichi; Tsubota, Jun

    2014-04-01

    The purpose of this study was to quantify the life-cycle greenhouse gas (GHG) emissions reduction that could be achieved by replacement of fossil-derived materials with biodegradable, biomass-based materials for household plastic containers and packaging, considering a variety of their treatment options. The biomass-based materials were 100% polylactide or a combination of polybutylene succinate adipate and polylactide. A scenario analysis was conducted considering alternative recycling methods. Five scenarios were considered: two for existing fossil-derived materials (the current approach in Japan) and the three for biomass-based materials. Production and waste disposal of 1 m(3) of plastic containers and packaging from households was defined as the functional unit. The results showed that replacement of fossil-derived materials with biomass-based materials could reduce life-cycle GHG emissions by 14-20%. Source separation and recycling should be promoted. When the separate collection ratio reached 100%, replacement with biomass-based materials could potentially reduce GHG emissions by 31.9%. Food containers are a priority for replacement, because they alone could reduce GHG emissions by 10%. A recycling system for biomass-based plastics must be carefully designed, considering aspects such as the transition period from fossil-derived plastics to biomass-based plastics.

  14. Effect of packaging materials on the chemical composition and microbiological quality of edible mushroom (Pleurotus ostreatus) grown on cassava peels

    PubMed Central

    Ajayi, Oluwakemi; Obadina, Adewale; Idowu, Micheal; Adegunwa, Mojisola; Kajihausa, Olatundun; Sanni, Lateef; Asagbra, Yemisi; Ashiru, Bolanle; Tomlins, Keith

    2015-01-01

    Edible fungi such as mushrooms are highly perishable and deteriorate few days after harvest due to its high moisture content and inability to maintain their physiological status. In this study, the effect of packaging materials on the nutritional composition of mushroom cultivated from cassava peels was investigated. Mushroom samples were dried at 50°C in a cabinet dryer for 8 h. The dried mushroom samples packaged in four different packaging materials; high density polyethylene (HDPE), polypropylene (PP), laminated aluminum foil (LAF), high density polyethylene under vacuum (HDPEV) were stored at freezing (0°C) temperatures for 12 weeks. Samples were collected at 2-week intervals and analyzed for proximate composition (carbohydrate, protein, fat, fiber, ash, moisture), mineral content (calcium, potassium), vitamin C content, and microbiological qualities (total aerobic count, Pseudomonal count, Coliform count, Staphylococcal count, Salmonella count) using the standard laboratory procedures. Carbohydrate, protein, fat content of dried mushrooms packaged in HDPE at freezing temperature ranged from 45.2% to 53.5%, 18.0% to 20.3%, and 3.2% to 4.3%, while mushrooms in polypropylene ranged from 45.2% to 53.5%, 18.5% to 20.3%, 2.6% to 4.3%. Carbohydrate, protein, fat of mushroom in LAF ranged from 47.8% to 53.5%, 17.3% to 20.3%, and 3.3% to 4.3%, respectively, while carbohydrate, protein, fat of mushroom in HDPEV ranged from 51.1% to 53.5%, 19.5% to 20.3%, and 3.5% to 4.3%. Microbiological analysis showed that total aerobic count, Pseudomonal count, and Staphyloccocal count of dried mushroom ranged from 2.3 to 3.8 log cfu/g, 0.6 to 1.1 log cfu/g, and 0.4 to 0.5 log cfu/g, respectively. In conclusion, dried mushroom in HDPE packaged under vacuum at freezing temperature retained the nutritional constituents than those packaged with other packaging materials. PMID:26288720

  15. Effect of packaging materials on the chemical composition and microbiological quality of edible mushroom (Pleurotus ostreatus) grown on cassava peels.

    PubMed

    Ajayi, Oluwakemi; Obadina, Adewale; Idowu, Micheal; Adegunwa, Mojisola; Kajihausa, Olatundun; Sanni, Lateef; Asagbra, Yemisi; Ashiru, Bolanle; Tomlins, Keith

    2015-07-01

    Edible fungi such as mushrooms are highly perishable and deteriorate few days after harvest due to its high moisture content and inability to maintain their physiological status. In this study, the effect of packaging materials on the nutritional composition of mushroom cultivated from cassava peels was investigated. Mushroom samples were dried at 50°C in a cabinet dryer for 8 h. The dried mushroom samples packaged in four different packaging materials; high density polyethylene (HDPE), polypropylene (PP), laminated aluminum foil (LAF), high density polyethylene under vacuum (HDPEV) were stored at freezing (0°C) temperatures for 12 weeks. Samples were collected at 2-week intervals and analyzed for proximate composition (carbohydrate, protein, fat, fiber, ash, moisture), mineral content (calcium, potassium), vitamin C content, and microbiological qualities (total aerobic count, Pseudomonal count, Coliform count, Staphylococcal count, Salmonella count) using the standard laboratory procedures. Carbohydrate, protein, fat content of dried mushrooms packaged in HDPE at freezing temperature ranged from 45.2% to 53.5%, 18.0% to 20.3%, and 3.2% to 4.3%, while mushrooms in polypropylene ranged from 45.2% to 53.5%, 18.5% to 20.3%, 2.6% to 4.3%. Carbohydrate, protein, fat of mushroom in LAF ranged from 47.8% to 53.5%, 17.3% to 20.3%, and 3.3% to 4.3%, respectively, while carbohydrate, protein, fat of mushroom in HDPEV ranged from 51.1% to 53.5%, 19.5% to 20.3%, and 3.5% to 4.3%. Microbiological analysis showed that total aerobic count, Pseudomonal count, and Staphyloccocal count of dried mushroom ranged from 2.3 to 3.8 log cfu/g, 0.6 to 1.1 log cfu/g, and 0.4 to 0.5 log cfu/g, respectively. In conclusion, dried mushroom in HDPE packaged under vacuum at freezing temperature retained the nutritional constituents than those packaged with other packaging materials.

  16. Development of antioxidant packaging material by applying corn-zein to LLDPE film in combination with phenolic compounds.

    PubMed

    Park, Hye-Yeon; Kim, Sung-Jin; Kim, Ki Myong; You, Young-Sun; Kim, So Yeon; Han, Jaejoon

    2012-10-01

    Functional active packaging materials were successfully developed by incorporating antioxidant agents into corn-zein-laminated linear low-density polyethylene (LLDPE) film. The minimum effective concentrations of the active compounds (for example, thymol, carvacrol, eugenol) were determined and these compounds were then laminated into LLDPE films to develop corn-zein-laminated films with antioxidant agents. The release rate of antioxidant agents in gas and liquid media were determined along with the mechanical and water barrier properties of the films containing these compounds. Tensile strength and percentage elongation at break were reduced in the corn-zein-laminated LLDPE films when compared to typical LLDPE film. Furthermore, the ability of the corn-zein-laminated films to repel moisture decreased by approximately 12.2%, but was improved by incorporating hydrophobic antioxidant compounds in the corn-zein layer. Examination of release kinetics in the gas and liquid phases verified that antioxidants were effectively released from the films and inhibited oxidation during testing. Finally, the films were used for fresh ground beef packaging, and effectively inhibited lipid oxidation and had a positive effect on the color stability of beef patties during storage. These results indicate that the developed antioxidant films are a novel active packaging material that can be effectively implemented by the food industry to improve the quality and safety of foods. Zein protein, a by-product of corn processing industry, was laminated into plastic films in combination with natural phenolic compounds to develop antioxidant packaging films. The films demonstrated their efficient release patterns of antioxidant compounds, which are suitable for packaging applications and food protection. © 2012 Institute of Food Technologists®

  17. Physiochemical and antioxidant properties of roselle-mango juice blends; effects of packaging material, storage temperature and time

    PubMed Central

    Mgaya-Kilima, Beatrice; Remberg, Siv Fagertun; Chove, Bernard Elias; Wicklund, Trude

    2015-01-01

    A study was conducted to determine the effects of packaging materials, seasonality, storage temperature and time on physiochemical and antioxidant properties of roselle-mango juice blends. Roselle extract (20%, 40%, 60%, and 80%) was mixed with mango juice and stored in glass and plastic bottles at 4°C and 28°C. Total soluble solids, pH, titratable acidity, reducing sugar, color, vitamin C, total monomeric anthocyanins, total phenols, and antioxidant activity (FRAP) were evaluated in freshly prepared juice, and after, 2, 4, and 6 months of storage. The results showed that total soluble solids, reducing sugars, and pH increased with storage times under different storage time, irrespective of packaging materials. The acidity, color, total monomeric anthocyanin, vitamin C, total phenols, and antioxidant activity decreased during storage irrespective of storage temperature and packaging material. Loss of anthocyanins, total phenols, and vitamin C content were higher in blends stored at 28°C than 4°C. PMID:25838888

  18. Physiochemical and antioxidant properties of roselle-mango juice blends; effects of packaging material, storage temperature and time.

    PubMed

    Mgaya-Kilima, Beatrice; Remberg, Siv Fagertun; Chove, Bernard Elias; Wicklund, Trude

    2015-03-01

    A study was conducted to determine the effects of packaging materials, seasonality, storage temperature and time on physiochemical and antioxidant properties of roselle-mango juice blends. Roselle extract (20%, 40%, 60%, and 80%) was mixed with mango juice and stored in glass and plastic bottles at 4°C and 28°C. Total soluble solids, pH, titratable acidity, reducing sugar, color, vitamin C, total monomeric anthocyanins, total phenols, and antioxidant activity (FRAP) were evaluated in freshly prepared juice, and after, 2, 4, and 6 months of storage. The results showed that total soluble solids, reducing sugars, and pH increased with storage times under different storage time, irrespective of packaging materials. The acidity, color, total monomeric anthocyanin, vitamin C, total phenols, and antioxidant activity decreased during storage irrespective of storage temperature and packaging material. Loss of anthocyanins, total phenols, and vitamin C content were higher in blends stored at 28°C than 4°C.

  19. Far-Field Accumulation of Fissile Material From Waste Packages Containing Plutonium Disposition Waste Form

    SciTech Connect

    J.P. Nicot

    2000-09-29

    The objective of this calculation is to estimate the quantity of fissile material that could accumulate in fractures in the rock beneath plutonium-ceramic (Pu-ceramic) and Mixed-Oxide (MOX) waste packages (WPs) as they degrade in the potential monitored geologic repository at Yucca Mountain. This calculation is to feed another calculation (Ref. 31) computing the probability of criticality in the systems described in Section 6 and then ultimately to a more general report on the impact of plutonium on the performance of the proposed repository (Ref. 32), both developed concurrently to this work. This calculation is done in accordance with the developmentmore » plan TDP-DDC-MD-000001 (Ref. 9), item 5. The original document described in item 5 has been split into two documents: this calculation and Ref. 4. The scope of the calculation is limited to only very low flow rates because they lead to the most conservative cases for Pu accumulation and more generally are consistent with the way the effluent from the WP (called source term in this calculation) was calculated (Ref. 4). Ref. 4 (''In-Drift Accumulation of Fissile Material from WPs Containing Plutonium Disposition Waste Forms'') details the evolution through time (breach time is initial time) of the chemical composition of the solution inside the WP as degradation of the fuel and other materials proceed. It is the chemical solution used as a source term in this calculation. Ref. 4 takes that same source term and reacts it with the invert; this calculation reacts it with the rock. In addition to reactions with the rock minerals (that release Si and Ca), the basic mechanisms for actinide precipitation are dilution and mixing with resident water as explained in Section 2.1.4. No other potential mechanism such as flow through a reducing zone is investigated in this calculation. No attempt was made to use the effluent water from the bottom of the invert instead of using directly the effluent water from the WP. This

  20. 49 CFR 171.23 - Requirements for specific materials and packagings transported under the ICAO Technical...

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... self-closing release device (see § 171.8). In addition, an aerosol must be in a metal packaging when... containing natural uranium or thorium must conform to the requirements of §§ 173.421, 173.424, or 173.426 of...

  1. 49 CFR 175.701 - Separation distance requirements for packages containing Class 7 (radioactive) materials in...

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... and crew: Transport index or sum of transport indexes of all packages in the aircraft or predesignated..., overpacks or freight containers labeled Radioactive Yellow-II or Radioactive Yellow-III must be separated... paragraphs (a) and (b) of this section on the basis of the sum of the transport index numbers of the...

  2. 49 CFR 175.701 - Separation distance requirements for packages containing Class 7 (radioactive) materials in...

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... and crew: Transport index or sum of transport indexes of all packages in the aircraft or predesignated..., overpacks or freight containers labeled Radioactive Yellow-II or Radioactive Yellow-III must be separated... paragraphs (a) and (b) of this section on the basis of the sum of the transport index numbers of the...

  3. 49 CFR 175.701 - Separation distance requirements for packages containing Class 7 (radioactive) materials in...

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... and crew: Transport index or sum of transport indexes of all packages in the aircraft or predesignated..., overpacks or freight containers labeled Radioactive Yellow-II or Radioactive Yellow-III must be separated... paragraphs (a) and (b) of this section on the basis of the sum of the transport index numbers of the...

  4. 77 FR 22504 - Hazardous Materials; Packages Intended for Transport by Aircraft

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-16

    ... Technical Instructions by requiring that friction and screw type closures (i.e., all closure types) of inner... the ICAO Technical Instructions that require friction and screw type closures of inner packagings... Currently under the HMR, stoppers, corks, or other such friction- type closures must be held securely...

  5. Effect of Coating and Packaging Materials on Photocatalytic and Antimicrobial Activities of Titanium Dioxide Nanoparticles

    USDA-ARS?s Scientific Manuscript database

    Food safety or foodborne pathogen contamination is a major concern in food industry. Titanium dioxide (TiO2) is a photocatalyst and can inactivate a wide spectrum of microorganisms under UV illumination. There is significant interest in the development of TiO2-coated or –incorporated food packaging ...

  6. 21 CFR 181.22 - Certain substances employed in the manufacture of food-packaging materials.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Certain substances employed in the manufacture of... INGREDIENTS Specific Prior-Sanctioned Food Ingredients § 181.22 Certain substances employed in the manufacture....23, 181.24, 181.25, 181.26, 181.27, 181.28, 181.29, and 181.30 in the manufacture of packaging...

  7. 21 CFR 181.22 - Certain substances employed in the manufacture of food-packaging materials.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Certain substances employed in the manufacture of... INGREDIENTS Specific Prior-Sanctioned Food Ingredients § 181.22 Certain substances employed in the manufacture....23, 181.24, 181.25, 181.26, 181.27, 181.28, 181.29, and 181.30 in the manufacture of packaging...

  8. Trends in Food Packaging.

    ERIC Educational Resources Information Center

    Ott, Dana B.

    1988-01-01

    This article discusses developments in food packaging, processing, and preservation techniques in terms of packaging materials, technologies, consumer benefits, and current and potential food product applications. Covers implications due to consumer life-style changes, cost-effectiveness of packaging materials, and the ecological impact of…

  9. Physics of Failure Analysis of Xilinx Flip Chip CCGA Packages: Effects of Mission Environments on Properties of LP2 Underfill and ATI Lid Adhesive Materials

    NASA Technical Reports Server (NTRS)

    Suh, Jong-ook

    2013-01-01

    The Xilinx Virtex 4QV and 5QV (V4 and V5) are next-generation field-programmable gate arrays (FPGAs) for space applications. However, there have been concerns within the space community regarding the non-hermeticity of V4/V5 packages; polymeric materials such as the underfill and lid adhesive will be directly exposed to the space environment. In this study, reliability concerns associated with the non-hermeticity of V4/V5 packages were investigated by studying properties and behavior of the underfill and the lid adhesvie materials used in V4/V5 packages.

  10. Materials Assessment of Insulating Foam in the 9977 Shipping Package for Long-Term Storage - Annual Report

    SciTech Connect

    McWilliams, A. J.

    2016-08-01

    The 9977 shipping package is being evaluated for long-term storage applications in the K-Area Complex (KAC) with specific focus on the packaging foam material. A rigid closed cell polyurethane foam, LAST-A-FOAM® FR-3716, produced by General Plastics Manufacturing Company is sprayed and expands to fill the void between the inner container and the outer shell of the package. The foam is sealed in this annular space and is not accessible. During shipping and storage, the foam experiences higher than ambient temperatures from the heat generated by nuclear material within the package creating the potential for degradation of the foam. A seriesmore » of experiments is underway to determine the extent of foam degradation. Foam samples of three densities have been aging at elevated temperatures 160 °F, 160 °F + 50% relative humidity (RH), 185 °F, 215 °F, and 250 °F since 2014. Samples were periodically removed and tested. After approximately 80 weeks, samples conditioned at 160 °F, 160 °F + 50% RH, and 185 °F have retained initial property values while samples conditioned at 215 °F have reduced intumescence. Samples conditioned at 250 °F have shown the most degradation, loss of volume, mass, absorbed energy under compression, intumescence, and increased flammability. Based on the initial data, temperatures up to 185 °F have not yet shown an adverse effect on the foam properties and it is recommended that exposure of FR-3716 foam to temperatures in excess of 250 °F be avoided or minimized. Testing will continue beyond the 96 week mark. This will provide additional data to help define the long-term behavior for the lower temperature conditions. Additional testing will be pursued in an attempt to identify transition points (threshold times and temperatures) at the higher temperatures of interest, as well as possible benefits of aging within the relatively oxygen-free environment the foam experiences inside the 9977 shipping package.« less

  11. Experimental analysis of axial and radial stress distribution in soft materials used for petrochemical valve stem sealing package

    NASA Astrophysics Data System (ADS)

    Ripeanu, R. G.; Ispas, A.; Ispas, D.

    2017-02-01

    Paper presents experimental results obtained by authors regarding pressure values and distribution, by using a special pressure sensitive paper, type FujiFilm and adequate hardware equipment and a soft program FPD810 Win. Was obtained the proper axial force related for different materials in order to respect the valves sealing demands. Were showed that, pressure maps obtained depends of the construction of sealing package, density of the preformed band rings and corrected sealing replacing on location in case of square braided cord used.

  12. Comparative Packaging Study

    NASA Technical Reports Server (NTRS)

    Perchonok, Michele; Antonini, David

    2008-01-01

    This viewgraph presentation describes a comparative packaging study for use on long duration space missions. The topics include: 1) Purpose; 2) Deliverables; 3) Food Sample Selection; 4) Experimental Design Matrix; 5) Permeation Rate Comparison; and 6) Packaging Material Information.

  13. Electric pulse induced impedance and material degradation in IC chip packaging

    NASA Astrophysics Data System (ADS)

    Yao, Wei; Basaran, Cemal

    2013-09-01

    A method for measurement of electric circuit conduction path by Scan Electron Microscopy (SEM) has been developed. It shows that current conducts through the whole surface layer of solder joints when subjected to high frequency pulse loadings, but only half of the surface layer when subjected to AC loading. The Electrical Pulse Induced Resistance Change (EPIR) profile of a symmetric solder bump thin film structure of a typical IC chips packaging is studied. EPIR is found to be frequency, duty factor and current density dependent. An average current density model is proposed to approximate duty factor and the current density induced EPIR effects.

  14. Research on statistical process control for solvent residual quantity of packaging materials

    NASA Astrophysics Data System (ADS)

    Xiao, Yingzhe; Huang, Yanan

    2013-03-01

    Statistical Process Control (SPC) and the basic tool of its controlling - control chart - are discussed in this paper based on the development of quality management, current situation of quality management of Chinese packaging enterprises, and the necessity of applying SPC. On this basis, X-R control chart is used to analyze and control the solvent residual in the compound process. This work may allow field personnel to find the shortcomings in the quality control by noticing the corresponding of fluctuations and slow variations in the process in time. In addition, SPC also provides objective basis for the quality management personnel to assess semi-products or products quality.

  15. 48 CFR 552.211-89 - Non-manufactured wood packaging material for export.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ...://www.aphis.usda.gov/import_export/plants/plant_exports/wpm/country/index.shtml. Non-manufactured wood... distinct material that by itself or in combination with other materials forms the container providing a...

  16. Resource Materials To Support Your Environmental Education Efforts. EE-TIPS (Environmental Education Technical Information Packages).

    ERIC Educational Resources Information Center

    North American Association for Environmental Education, Troy, OH.

    This collection gathers together over 50 high-quality materials to support environmental education (EE) curricula. Because each community has unique environmental and educational needs, the guide includes a broad set of educational materials that can be adapted to a variety of settings. The materials can be used to supplement educational…

  17. Effect of ionizing radiation on physicochemical and mechanical properties of commercial multilayer coextruded flexible plastics packaging materials

    NASA Astrophysics Data System (ADS)

    Goulas, Antonios E.; Riganakos, Kyriakos A.; Kontominas, Michael G.

    2003-12-01

    The effect of gamma radiation (doses: 5, 10 and 30 kGy) on mechanical properties, gas and water vapour permeability and overall migration values into distilled water, 3% aqueous acetic acid and iso-octane was studied for a series of commercial multilayer flexible packaging materials based on coextruded polypropylene (PP), ethylene vinyl alcohol (EVOH), low-density polyethylene (LDPE), linear low-density polyethylene (LLDPE), polyamide (PA) and Ionomer. The results showed that radiation doses of 5 and 10 kGy induced no statistically significant differences ( p>0.05) in all polymer properties examined. A dose of 30 kGy induced differences ( p<0.05) in the mechanical properties of PA/LDPE, LDPE/EVOH/LDPE and LDPE/PA/Ionomer films. In addition, the same dose induced differences ( p<0.05) in the overall migration from Ionomer/EVOH/LDPE and LDPE/PA/Ionomer films into 3% acetic acid and iso-octane and in the overall migration from PP/EVOH/LDPE-LLDPE into iso-octane. Differences recorded, are discussed in relation to food irradiation applications of respective packaging materials.

  18. [Simultaneous determination of six fluorescent whitening agents in plastic and paper packaging materials by high performance liquid chromatography].

    PubMed

    Zhang, Juzhou; Ji, Shuilin; Cai, Huimei; Li, Jing; Wang, Yongxin; Wang, Jingqiu

    2017-11-08

    A novel analytical method was developed for the simultaneous determination of six fluorescent whitening agents (FWAs:FWA 135, FWA 184, FWA 185, FWA 199, FWA 378 and FWA 393) in paper and plastic food packaging materials by high performance liquid chromatography with fluorescence detection (HPLC-FLD). The sample was extracted with mixed solution of chloroform and acetonitrile (3:7, v/v), then cleaned up by HLB solid phase extraction column. Qualitative and quantitative analyses were carried out by HPLC. The sample was separated on a Phenomenex C18 column using acetonitrile and 5 mmol/L ammonium acetate aqueous solution as mobile phases. The results indicated that the linear range of FWA393 was 15-1500 μg/L and the linear ranges of the other five FWAs were 5-500 μg/L with correlation coefficients greater than 0.999. The recoveries in spiked samples were between 80.4% and 125.0% with RSDs ( n =6) of 1%-13%. Furthermore, this method was applied to analyze 12 samples in the market to verify the practicality of the method. The method showed the advantages of simplicity, high recovery and good precision, and is suitable for the detection of the six fluorescent whitening agents in food packaging materials.

  19. Quality and safety aspects of reusable plastic food packaging materials: a European study to underpin future legislation.

    PubMed

    Jetten, J; de Kruijf, N; Castle, L

    1999-01-01

    The objective of this study was to develop a comprehensive package of quality assurance criteria for use by industry and regulatory authorities for ensuring the quality and safety-in-use (sensory, microbiological and chemical) of reused plastics for food packaging. The study included thermal degradation effects, flavour carry-over caused by flavour and off-flavour substances, the influence of washing processes on the materials, and the efficiency of washing processes in removing off-flavour substances and surrogate substances representing misuse chemicals as might be put in bottles by consumers. The microbial safety of the refillable plastic articles in relation to commercial washing processes and the industrial procedures applied has also been investigated. Lastly, the suitability of laboratory procedures using strips of bottle material for predicting the sorption and washing properties of refillable plastic bottles has been studied. In general it is concluded that reuse of the articles does not significantly influence any of the properties investigated. Neither the chemical, physical nor surface properties seem to be significantly influenced by repeated washing. It can be concluded, however, that it is very likely that most of the articles investigated will cause flavour carry-over to a new filling if they are contaminated with strongly flavoured products. Finally it can be concluded that the procedures evaluated can serve as a basis for future legislation on refillable articles, but for several procedures (like quick predictive testing with strips) more investigation is required to create a more solid basis.

  20. Forensic engineering of advanced polymeric materials. Part III - Biodegradation of thermoformed rigid PLA packaging under industrial composting conditions.

    PubMed

    Musioł, Marta; Sikorska, Wanda; Adamus, Grazyna; Janeczek, Henryk; Richert, Jozef; Malinowski, Rafal; Jiang, Guozhan; Kowalczuk, Marek

    2016-06-01

    This paper presents a forensic engineering study on the biodegradation behaviour of prototype packaging thermoformed from PLA-extruded film and plain PLA film under industrial composting conditions. Hydrolytic degradation in water was conducted for reference. The effects of composting duration on changes in molar mass, glass transition temperature and degree of crystallinity of the polymeric material were monitored using gel permeation chromatography (GPC) and differential scanning calorimetry (DSC). The chemical structure of water soluble degradation products of the polymeric material was determined using nuclear magnetic resonance (NMR) and electrospray ionization mass spectrometry (ESI-MS). The results show that the biodegradation process is less dependent on the thermoforming process of PLA and more dependent on the composting/degradation conditions that are applied. The increase in the dispersity index, leading to the bimodal molar mass distribution profile, suggests an autocatalytic hydrolysis effect at the early stage of the composting process, during which the bulk hydrolysis mechanism dominantly operates. Both the prototype PLA-packaging and PLA rigid film samples were shown to have a gradual increase in opacity due to an increase in the degree of crystallinity. Copyright © 2016 Elsevier Ltd. All rights reserved.

  1. Antimicrobial effectiveness of bioactive packaging materials from edible chitosan and casein polymers: assessment on carrot, cheese, and salami.

    PubMed

    Moreira, Maria del Rosario; Pereda, Mariana; Marcovich, Norma E; Roura, Sara I

    2011-01-01

    Antimicrobial packaging is one of the most promising active packaging systems for controlling spoilage and pathogenic microorganisms. In this work, the intrinsic antimicrobial properties of chitosan (CH) were combined with the excellent thermoplastic and film-forming properties of sodium caseinate (SC) to prepare SC/CH film-forming solutions and films. The antimicrobial effectiveness of SC, CH, and SC/CH coatings on the native microfloras of cheese, salami, and carrots was evaluated. In vitro assays through the test tube assay indicated that the most significant antimicrobial effect was achieved by CH and SC/CH solutions on carrot and cheese native microfloras. SC film-forming solutions did not exert antimicrobial activity on any of the native microflora studied. SC, CH, and SC/CH films stored in controlled environments showed that the retention of the antimicrobial action was observed until 5-d storage, at 65% relative humidity in both temperatures (10 °C and 20 °C). In vivo assays were also performed with SC, CH, and SC/CH applied as coatings or wrappers on the 3 food substrates. CH and SC/CH applied at both immersion and wrapper exerted a significant bactericidal action on mesophilic, psychrotrophic, and yeasts and molds counts, showing the 3 microbial populations analyzed a significant reduction (2.0 to 4.5 log CFU/g). An improvement of the bactericidal properties of the CH/SC blend respect to those of the neat CH film is reported. The ionic interaction between both macromolecules enhances its antimicrobial properties. Practical Application: The continuous consumer interest in high quality and food safety, combined with environmental concerns has stimulated the development and study of biodegradable coatings that avoid the use of synthetic materials. Among them, edible coatings, obtained from generally recognized as safe (GRAS) materials, have the potential to reduce weight loss, respiration rate, and improve food appearance and integrity. They can be used in

  2. Atmospheric-Pressure Cold Plasmas Used to Embed Bioactive Compounds in Matrix Material for Active Packaging of Fruits and Vegetables

    NASA Astrophysics Data System (ADS)

    Fernandez, Sulmer; Pedrow, Patrick; Powers, Joseph; Pitts, Marvin

    2009-10-01

    Active thin film packaging is a technology with the potential to provide consumers with new fruit and vegetable products-if the film can be applied without deactivating bioactive compounds.Atmospheric pressure cold plasma (APCP) processing can be used to activate monomer with concomitant deposition of an organic plasma polymerized matrix material and to immobilize a bioactive compound all at or below room temperature.Aims of this work include: 1) immobilize an antimicrobial in the matrix; 2) determine if the antimicrobial retains its functionality and 3) optimize the reactor design.The plasma zone will be obtained by increasing the voltage on an electrode structure until the electric field in the feed material (argon + monomer) yields electron avalanches. Results will be described using Red Delicious apples.Prospective matrix precursors are vanillin and cinnamic acid.A prospective bioactive compound is benzoic acid.

  3. Development of tea extracts and chitosan composite films for active packaging materials.

    PubMed

    Peng, Yong; Wu, Yan; Li, Yunfei

    2013-08-01

    The effects of 0.5%, 1% and 2% green tea extracts (GTE) and black tea extracts (BTE) on the physical, structural and antioxidant properties of chitosan films were investigated. Results showed that the addition of tea extracts significantly decreased water vapour permeability and increased the antioxidant ability of films. The DPPH radical scavenging ability of GTE films was stronger than that of BTE films in all food simulants (0%, 20%, 75% and 95% ethanol). The equilibration time in different food simulants decreased with the increased ethanol concentration. DSC and FTIR spectra analysis indicated that there was strong interaction in film matrix, which could be reflected by the physical and mechanical properties of composite films. This study revealed that an active chitosan film could be obtained by incorporation of tea extracts, which may provide new formulation options for developing an antioxidant active packaging. Copyright © 2013 Elsevier B.V. All rights reserved.

  4. Controlling lipid oxidation via a biomimetic iron chelating active packaging material.

    PubMed

    Tian, Fang; Decker, Eric A; Goddard, Julie M

    2013-12-18

    Previously, a siderophore-mimetic metal chelating active packaging film was developed by grafting poly(hydroxamic acid) (PHA) from the surface of polypropylene (PP) films. The objective of the current work was to demonstrate the potential applicability of this PP-g-PHA film to control iron-promoted lipid oxidation in food emulsions. The iron chelating activity of this film was investigated, and the surface chemistry and color intensity of films were also analyzed after iron chelation. In comparison to the iron chelating activity in the free Fe(3+) solution, the PP-g-PHA film retained approximately 50 and 30% of its activity in nitrilotriacetic acid (NTA)/Fe(3+) and citric acid/Fe(3+) solutions, respectively (pH 5.0), indicating a strong chelating strength for iron. The ability of PP-g-PHA films to control lipid oxidation was demonstrated in a model emulsion system (pH 3.0). PP-g-PHA films performed even better than ethylenediaminetetraacetic acid (EDTA) in preventing the formation of volatile oxidation products. The particle size and ζ potential results of emulsions indicated that PP-g-PHA films had no adverse effects on the stability of the emulsion system. Attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) analysis suggested a non-migratory nature of the PP-g-PHA film surface. These results suggest that such biomimetic, non-migratory metal chelating active packaging films have commercial potential in protecting foods against iron-promoted lipid oxidation.

  5. MsSpec-1.0: A multiple scattering package for electron spectroscopies in material science

    NASA Astrophysics Data System (ADS)

    Sébilleau, Didier; Natoli, Calogero; Gavaza, George M.; Zhao, Haifeng; Da Pieve, Fabiana; Hatada, Keisuke

    2011-12-01

    We present a multiple scattering package to calculate the cross-section of various spectroscopies namely photoelectron diffraction (PED), Auger electron diffraction (AED), X-ray absorption (XAS), low-energy electron diffraction (LEED) and Auger photoelectron coincidence spectroscopy (APECS). This package is composed of three main codes, computing respectively the cluster, the potential and the cross-section. In the latter case, in order to cover a range of energies as wide as possible, three different algorithms are provided to perform the multiple scattering calculation: full matrix inversion, series expansion or correlation expansion of the multiple scattering matrix. Numerous other small Fortran codes or bash/csh shell scripts are also provided to perform specific tasks. The cross-section code is built by the user from a library of subroutines using a makefile. Program summaryProgram title: MsSpec-1.0 Catalogue identifier: AEJT_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEJT_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 504 438 No. of bytes in distributed program, including test data, etc.: 14 448 180 Distribution format: tar.gz Programming language: Fortran 77 Computer: Any Operating system: Linux, MacOs RAM: Bytes Classification: 7.2 External routines: Lapack ( http://www.netlib.org/lapack/) Nature of problem: Calculation of the cross-section of various spectroscopies. Solution method: Multiple scattering. Running time: The test runs provided only take a few seconds to run.

  6. Learning Packages in International Relations. Learning Package Three. Dyadic (Two-Party) Disputes before the Permanent Court of International Justice, the International Courts of Justice, the League of Nations, and the United Nations: Analytical and Empirical Materials.

    ERIC Educational Resources Information Center

    Rochester, J. Martin

    Material in this learning package is designed to introduce college students to the systematic study of the role of international institutions in interactions among states. Emphasis is upon students: 1) testing various ideas found in the scholarly literature concerning international conflict and its control through international institutions; 2)…

  7. Novel silicone materials for LED packaging and opto-electronics devices

    NASA Astrophysics Data System (ADS)

    Vanlathem, Eric; Norris, Ann W.; Bahadur, Maneesh; DeGroot, Jon; Yoshitake, Makoto

    2006-04-01

    Silicone based materials have attracted considerable attention from Light Emitting Diode (LED) manufacturers. In LEDs, silicones can function in several roles that include optical lenses, stress relieving encapsulants, mechanical protection and light path materials. The key attributes of silicones that make them attractive materials for high brightness (HB) LEDs include their excellent transparency in the UV-visible region, their non-discoloring behavior and their stable thermo-mechanical properties. The first part of this paper/presentation will describe recent silicone materials development efforts directed towards providing LED manufacturers with silicone materials solutions for LED device fabrication. Injection molding of novel silicone resin based materials will be discussed as a viable route for high throughput LED device manufacturing. For other portions of the light spectrum, specifically at telecom wavelengths, the performances of silicone based materials are also verified and this makes them attractive materials for numerous photonics device applications. The second part of this paper/presentation will describe recent demonstrations of siloxane for use as waveguides for datacom and telecom applications. A Variable Optical Attenuator (VOA) utilizing silicone based waveguides (exploiting dn/dT property) and an Optical Backplane built from silicone waveguides and out-of-plane mirrors built on glass and FR-4 substrates are discussed.

  8. Programme on the recyclability of food-packaging materials with respect to food safety considerations: polyethylene terephthalate (PET), paper and board, and plastics covered by functional barriers.

    PubMed

    Franz, R

    2002-01-01

    Stimulated by new ecology-driven European and national regulations, news routes of recycling waste appear on the market. Since food packages represent a large percentage of the plastics consumption and since they have a short lifetime, an important approach consists in making new packages from post-consumer used packages. On the other hand, food-packaging regulations in Europe require that packaging materials must be safe. Therefore, potential mass transfer (migration) of harmful recycling-related substances to the food must be excluded and test methods to ensure the safety-in-use of recycled materials for food packaging are needled. As a consequence of this situation, a European research project FAIR-CT98-4318, with the acronym 'Recyclability', was initiated. The project consists of three sections each focusing on a different class of recycled materials: polyethylene terephthalate (PET), paper and board, and plastics covered by functional barriers. The project consortium consists of 28 project members from 11 EU countries. In addition, the project is during its lifetime in discussion with the US Food and Drug Administrations (FDA) to consider also US FDA regulatory viewpoints and to aim, as a consequence, to harmonizable conclusions and recommendations. The paper introduces the project and presents an overview of the project work progress.

  9. Packaging for Food Service

    NASA Technical Reports Server (NTRS)

    Stilwell, E. J.

    1985-01-01

    Most of the key areas of concern in packaging the three principle food forms for the space station were covered. It can be generally concluded that there are no significant voids in packaging materials availability or in current packaging technology. However, it must also be concluded that the process by which packaging decisions are made for the space station feeding program will be very synergistic. Packaging selection will depend heavily on the preparation mechanics, the preferred presentation and the achievable disposal systems. It will be important that packaging be considered as an integral part of each decision as these systems are developed.

  10. Mobile Geochemistry Instrument Package Facility (MGIPF) for In Situ Mineralogical and Chemical Analysis of Planetary Surface Material

    NASA Astrophysics Data System (ADS)

    Klingelhöfer, G.; Romstedt, J.; Henkel, H.; Michaelis, H.; Brückner, J.; D'Uston, C.

    A first order requirement for any spacecraft mission to land on a solid planetary or moon surface is instrumentation for in-situ mineralogical and chemical analysis 2 Such analysis provide data needed for primary classification and characterization of surface materials present We will discuss a mobile instrument package we have developed for in-situ investigations under harsh environmental conditions like on Mercury or Mars This Geochemistry Instrument Package Facility is a compact box also called payload cab containing three small advanced geochemistry mineralogy instruments the chemical spectrometer APXS the mineralogical M o ssbauer spectrometer MIMOS II 3 and a textural imager close-up camera The payload cab is equipped with two actuating arms with two degrees of freedom permitting precision placement of all instruments at a chosen sample This payload cab is the central part of the small rover Nanokhod which has the size of a shoebox 1 The Nanokhod rover is a tethered system with a typical operational range of sim 100 m Of course the payload cab itself can be attached by means of its arms to any deployment device of any other rover or deployment device 1 Andre Schiele Jens Romstedt Chris Lee Sabine Klinkner Rudi Rieder Ralf Gellert G o star Klingelh o fer Bodo Bernhardt Harald Michaelis The new NANOKHOD Engineeering model for extreme cold environments 8th International symposium on Artificial Intelligence Robotics and Automation in Space 5 - 9 September 2005

  11. Effect of different packaging materials and storage intervals on physical and biochemical characteristics of pear.

    PubMed

    Kaur, Kirandeep; Dhillon, W S; Mahajan, B V C

    2013-02-01

    The fruits of semi-soft pear (Pyrus communis) cv. Punjab Beauty harvested at physiologically mature stage in 3rd week of July were packed in corrugated fiberboard boxes (CFB) with low density polyethylene (LDPE) liners, CFB with high density polyethylene (HDPE) liners, crates with LDPE liners, crates with HDPE liners, CFB, crates and wooden boxes and stored in walk-in-cool chamber at 0-1 °C and 90-95% RH. The fruits were analyzed after 30, 45, 60 and 75 days for physiological loss in weight (PLW), fruit firmness, core browning, spoilage, total soluble solids (TSS), juice acidity and sensory quality. The PLW was maximum in crates while the spoilage was maximum in fruits packed in wooden boxes. Core browning was more in fruits packed in crates and CFB boxes with LDPE liners while minimum was in fruits packed in CFB boxes. However, core browning did not occur up to 45 days of storage in any of the package. Fruits packed in CFB boxes with HDPE liners effectively reduced the weight loss, spoilage and retained acceptable firmness up to 75 days of storage with maximum edible quality. TSS and sugars were maximum in fruits packed in wooden boxes while the acidity was maximum in CFB boxes with HDPE liners. The fruits in CFB boxes with HDPE liners maintained the perfect balance between sugars and acids up to 75 days of storage.

  12. 49 CFR 173.428 - Empty Class 7 (radioactive) materials packaging.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... transportation; (c) The outer surface of any uranium or thorium in its structure is covered with an inactive sheath made of metal or some other substantial material; (d) Internal contamination does not exceed 100...

  13. 49 CFR 173.428 - Empty Class 7 (radioactive) materials packaging.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... transportation; (c) The outer surface of any uranium or thorium in its structure is covered with an inactive sheath made of metal or some other substantial material; (d) Internal contamination does not exceed 100...

  14. 49 CFR 173.422 - Additional requirements for excepted packages containing Class 7 (radioactive) materials.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... digit UN identification number for the material preceded by the letters UN, as shown in column (4) of... subchapter, pertaining to the reporting of incidents; (c) Sections 174.750, 175.700(b), and 176.710 of this...

  15. 48 CFR 552.211-89 - Non-manufactured wood packaging material for export.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... products such as plywood, particle board, oriented strand board, veneer, wood wool, and similar materials..., crating, packing blocks, drums, load boards, pallet collars, and skids. (b) Non-manufactured wood pallets...

  16. Sustainable Materials Management (SMM) Web Academy Webinar: Reducing Wasted Food: How Packaging Can Help

    EPA Pesticide Factsheets

    This is a webinar page for the Sustainable Management of Materials (SMM) Web Academy webinar titled Let’s WRAP (Wrap Recycling Action Program): Best Practices to Boost Plastic Film Recycling in Your Community

  17. Aluminum-thin-film packaged fiber Bragg grating probes for monitoring the maximum tensile strain of composite materials.

    PubMed

    Im, Jooeun; Kim, Mihyun; Choi, Ki-Sun; Hwang, Tae-Kyung; Kwon, Il-Bum

    2014-06-10

    In this paper, new fiber Bragg grating (FBG) sensor probes are designed to intermittently detect the maximum tensile strain of composite materials, so as to evaluate the structural health status. This probe is fabricated by two thin Al films bonded to an FBG optical fiber and two supporting brackets, which are fixed on the surface of composite materials. The residual strain of the Al packaged FBG sensor probe is induced by the strain of composite materials. This residual strain can indicate the maximum strain of composite materials. Two types of sensor probes are prepared-one is an FBG with 18 μm thick Al films, and the other is an FBG with 36 μm thick Al films-to compare the thickness effect on the detection sensitivity. These sensor probes are bonded on the surfaces of carbon fiber reinforced plastics composite specimens. In order to determine the strain sensitivity between the residual strain of the FBG sensor probe and the maximum strain of the composite specimen, tensile tests are performed by universal testing machine, under the loading-unloading test condition. The strain sensitivities of the probes, which have the Al thicknesses of 18 and 36 μm, are determined as 0.13 and 0.23, respectively.

  18. Closing the loop on plastic packaging materials: What is quality and how does it affect their circularity?

    PubMed

    Hahladakis, John N; Iacovidou, Eleni

    2018-03-03

    While attention on the importance of closing materials loops for achieving circular economy (CE) is raging, the technicalities of doing so are often neglected or difficult to overcome. However, these technicalities determine the ability of materials to be properly recovered and redistributed for reuse or recycling, given the material, component and product (MCP) state and functionality. Materials have different properties that make them useful for various functions and purposes. A transition, therefore, towards a CE would require the utmost exploitation of all available routes that MCPs can be diverted to, based on their design, use and recovery; ideally, enabling a perpetual looping of them in the economy. Yet, this is difficult to succeed. In the present short communication article, the authors explain how the quality and the way it is meant at different stages of the plastic packaging supply chain affects their potential recycling; and outlines the opportunities and constraints offered by some of the changes that are currently introduced in order to improve their circularity. The purpose of this article is to underpin the need for research that integrates systemic thinking, with technological innovations and regulations at all stages of the supply chain, in an effort to promote sustainable practices to become established. Copyright © 2018. Published by Elsevier B.V.

  19. A Study of the Relation between the Mechanical Properties and the Adhesion Level in a Laminated Packaging Material

    NASA Astrophysics Data System (ADS)

    Kao-Walter, S.; Dahlström, J.; Karlsson, T.; Magnusson, A.

    2004-01-01

    The mechanical properties of a laminate consisting of aluminum-foil, adhesive, and polymer layers were studied in relation to the adhesion level. A special application for liquid-food packaging materials was considered. In experiments, laminates with and without adhesive layers were tested. Tensile tests were first run for every layer of the laminate, and the data obtained were then used in analyzing the results of tensile tests on the entire laminate, as well as in theoretical and finite-element calculations. Relations between different mechanical properties (such as Young's modulus, the peak stress, and the strain at the peak stress) and the adhesion level were analyzed. It was found that the tensile strength and the strain at the peak stress increased with adhesion level. Only slight differences in Young's modulus were observed at different adhesion levels.

  20. The influence of electron-beam irradiation on some mechanical properties of commercial multilayer flexible packaging materials

    NASA Astrophysics Data System (ADS)

    Oliveira, Vitor M.; Ortiz, Angel V.; Del Mastro, Nélida L.; Moura, Esperidiana A. B.

    2009-07-01

    The influence of electron-beam irradiation on mechanical properties of commercial multilayer flexible packaging materials based on coextruded and laminated polypropylene (PP), low-density polyethylene (LDPE), ethylene vinyl alcohol copolymer (EVOH) and poly(ethylene terephthalate) (PET), irradiated with doses up to 120 kGy, was studied. The tensile strength and elongation at break of the irradiated PET/PP film increase, while the penetration and sealing resistance decreased. In addition, the irradiated PET/LDPE/EVOH/LDPE film presented increase in the tensile strength on some radiation doses and decrease of the penetration and sealing resistance, except for sealing resistance at radiation dose of 15 kGy that resulted in a slight increase of ca 4%.

  1. Evaluation of an alternative shielding materials for F-127 transport package

    NASA Astrophysics Data System (ADS)

    Gual, Maritza R.; Mesquita, Amir Z.; Pereira, Cláubia

    2018-03-01

    Lead is used as radiation shielding material for the Nordion's F-127 source shipping container is used for transport and storage of the GammaBeam -127's cobalt-60 source of the Nuclear Technology Development Center (CDTN) located in Belo Horizonte, Brazil. As an alternative, Th, Tl and WC have been evaluated as radiation shielding material. The goal is to check their behavior regarding shielding and dosing. Monte Carlo MCNPX code is used for the simulations. In the MCNPX calculation was used one cylinder as exclusion surface instead one sphere. Validation of MCNPX gamma doses calculations was carried out through comparison with experimental measurements. The results show that tungsten carbide WC is better shielding material for γ-ray than lead shielding.

  2. 49 CFR 175.702 - Separation distance requirements for packages containing Class 7 (radioactive) materials in cargo...

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ...) The total transport index for all packages does not exceed 50.0 and the packages are carried in accordance with § 175.701(a); or (2) The total transport index for all packages exceeds 50.0; and (i) The... containers and any space occupied by live animals is at least 0.5 m (20 inches) for journeys not exceeding 24...

  3. 49 CFR 175.702 - Separation distance requirements for packages containing Class 7 (radioactive) materials in cargo...

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ...) The total transport index for all packages does not exceed 50.0 and the packages are carried in accordance with § 175.701(a); or (2) The total transport index for all packages exceeds 50.0; and (i) The... containers and any space occupied by live animals is at least 0.5 m (20 inches) for journeys not exceeding 24...

  4. 49 CFR 175.702 - Separation distance requirements for packages containing Class 7 (radioactive) materials in cargo...

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ...) The total transport index for all packages does not exceed 50.0 and the packages are carried in accordance with § 175.701(a); or (2) The total transport index for all packages exceeds 50.0; and (i) The... containers and any space occupied by live animals is at least 0.5 m (20 inches) for journeys not exceeding 24...

  5. 49 CFR 173.213 - Non-bulk packagings for solid hazardous materials in Packing Group III.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... Reconstituted wood box: 4F Fiberboard box: 4G Solid plastic box: 4H2 Inner packagings: Glass or earthenware receptacles Plastic receptacles Metal receptacles Glass ampoules (c) The following single packagings are... fiberboard box: 6PA2, 6PB2, 6PC or 6PG2 Glass, porcelain or stoneware in expanded or solid plastic packaging...

  6. 49 CFR 175.703 - Other special requirements for the acceptance and carriage of packages containing Class 7 materials.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... transport, by air— (1) Vented Type B(M) packages, packages which require external cooling by an ancillary cooling system or packages subject to operational controls during transport; or (2) Liquid pyrophoric... transport index in excess of the limits specified in § 173.441(a) of this subchapter may not be transported...

  7. 49 CFR 175.703 - Other special requirements for the acceptance and carriage of packages containing Class 7 materials.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... transport, by air— (1) Vented Type B(M) packages, packages which require external cooling by an ancillary cooling system or packages subject to operational controls during transport; or (2) Liquid pyrophoric... transport index in excess of the limits specified in § 173.441(a) of this subchapter may not be transported...

  8. 49 CFR 171.23 - Requirements for specific materials and packagings transported under the ICAO Technical...

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... oxygen service conform to the requirements of this paragraph, except when the cylinder is used for... only for a non-refillable receptacle containing a gas compressed, liquefied, or dissolved under...-belt pretensioners meeting the criteria for a Division 1.4G material. (3) Chemical oxygen generators...

  9. 49 CFR 171.23 - Requirements for specific materials and packagings transported under the ICAO Technical...

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... oxygen service conform to the requirements of this paragraph, except when the cylinder is used for... containing a gas compressed, liquefied, or dissolved under pressure the sole purpose of which is to expel a... for a Division 1.4G material. (3) Chemical oxygen generators. Chemical oxygen generators must be...

  10. 49 CFR 171.23 - Requirements for specific materials and packagings transported under the ICAO Technical...

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... oxygen service conform to the requirements of this paragraph, except when the cylinder is used for... containing a gas compressed, liquefied, or dissolved under pressure the sole purpose of which is to expel a... for a Division 1.4G material. (3) Chemical oxygen generators. Chemical oxygen generators must be...

  11. 78 FR 29016 - Establishing Quality Assurance Programs for Packaging Used in Transport of Radioactive Material

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-16

    ... regulatory guide describes a proposed method that the NRC staff considers acceptable for use in complying... for comments received on or before this date. Although a time limit is given, comments and suggestions... Safe Transport of Radioactive Material'' (TS-R-1); maintain consistency with changes in the U.S...

  12. Seafood Packaging

    NASA Technical Reports Server (NTRS)

    1996-01-01

    NASA's Technology Transfer Office at Stennis Space Center worked with a New Orleans seafood packaging company to develop a container to improve the shipping longevity of seafood, primarily frozen and fresh fish, while preserving the taste. A NASA engineer developed metalized heat resistant polybags with thermal foam liners using an enhanced version of the metalized mylar commonly known as 'space blanket material,' which was produced during the Apollo era.

  13. Evaluation of In-Package Performance of Antistatic Materials. Phase 2

    DTIC Science & Technology

    1982-01-01

    fixture was gained through the use of a dehumidifier only (ref 6, app C, and fig 5). Humidity was monitored using a humidity transducer (ref 8, app C...currently being marketed , with those containing EVA additives and PVC types representing the apparent extremes in static charge propensity (low and high). 4... market of many varieties of pack- aging materials, many of which do nothing other than Introduce a false sense of security. 5. Based on this background

  14. The high throughput investigation of polyphenolic couplers in biodegradable packaging materials

    NASA Astrophysics Data System (ADS)

    Lochhead, Robert Y.; Haynes, Camille T.; Jones, Stephen R.; Smith, Virginia

    2006-01-01

    Our goal is to select and develop stimuli-responsive interfacial coupling materials for nanocomposites that will enhance substrate mechanical properties during use but cause triggered disintegration when exposed to the appropriate aqueous environment. The study could potentially provide the scientific underpinning for the development of an interfacially interacting nanocomposite alloy capable of enhanced biodegradation in the aqueous environment. In the first stage of this study it was shown that quaternary ammonium polymers adsorbed on the faces of the montmorillonite platelets, non-ionic polyacrylamides adsorbed on the faces and edges by hydrogen bonding, and anionic polyelectrolytes, carboxylates and sulfonates, did not adsorb at all on the montmorillonite [R.Y. Lochhead, C.L. McConnell-Boykin, An investigative study of polymer adsorption to smectite clay: polyelectrolytes and sodium montmorillonite, in: R. Krishnamoorti, R. Vaia (Eds.), Polymer Nanocomposites, American Chemical Society, 2002; R.Y. Lochhead, C.L. McConnell-Boykin, C. Haynes, Interaction of hydrophilic polymers with smectite clays, Polymer Materials Science and Engineering, vol. 85, American Chemical Society, 2001, p. 419]. The objective of the second part of the study was to examine model polymers in order to guide research aimed at designing coupling polymers that would cause exfoliation of the clay. Based upon the earlier study, polyvinylamine was chosen as the model on the basis that it is a simple polymer with primary amine groups and the polymer charge density could be modified by simply changing the system pH. The aim of this research was to determine the conditions under which polyvinylamine, and selected derivatives of this polymer, would penetrate the galleries of the stacked montmorillonite platelets. The knowledge gained could be applied to predict systems that would facilitate intercalation or exfoliation of sodium montmorillonite. The investigative approach of the third stage was to

  15. STATUS REPORT FOR AGING STUDIES OF EPDM O-RING MATERIAL FOR THE H1616 SHIPPING PACKAGE

    SciTech Connect

    Stefek, T.; Daugherty, W.; Skidmore, E.

    2012-08-31

    This is an interim status report for tasks carried out per Task Technical Plan SRNL-STI-2011-00506. A series of tasks/experiments are being performed at the Savannah River National Laboratory to monitor the aging performance of ethylene propylene diene monomer (EPDM) Orings used in the H1616 shipping package. The data will support the technical basis to extend the annual maintenance of the EPDM O-rings in the H1616 shipping package and to predict the life of the seals at bounding service conditions. Current expectations are that the O-rings will maintain a seal at bounding normal temperatures in service (152 F) for at leastmore » 12 months. The baseline aging data review suggests that the EPDM O-rings are likely to retain significant mechanical properties and sealing force at bounding service temperatures to provide a service life of at least 2 years. At lower, more realistic temperatures, longer service life is likely. Parallel compression stress relaxation and vessel leak test efforts are in progress to further validate this assessment and quantify a more realistic service life prediction. The H1616 shipping package O-rings were evaluated for baseline property data as part of this test program. This was done to provide a basis for comparison of changes in material properties and performance parameters as a function of aging. This initial characterization was limited to physical and mechanical properties, namely hardness, thickness and tensile strength. These properties appear to be consistent with O-ring specifications. Three H1616-1 Containment Vessels were placed in test conditions and are aging at temperatures ranging from 160 to 300 F. The vessels were Helium leak-tested initially and have been tested at periodic intervals after cooling to room temperature to determine if they meet the criterion of leaktightness defined in ANSI standard N14.5-97 (< 1E-07 std cc air/sec at room temperature). To date, no leak test failures have occurred. The cumulative time

  16. Innovative material containing the natural product curcumin, with enhanced antimicrobial properties for active packaging.

    PubMed

    Papadimitriou, A; Ketikidis, I; Stathopoulou, M-E K; Banti, C N; Papachristodoulou, C; Zoumpoulakis, L; Agathopoulos, S; Vagenas, G V; Hadjikakou, S K

    2018-03-01

    Curcumin (Curc) reacts with zinc di‑iodine (ZnI 2 ) in 2:1molar ratio in the presence of an excess of a base triethylamine ((CH 3 CH 2 ) 3 N) in methanol (CH 3 OH) solution towards the amorphous solid material of formula [ZnI 2 (Curc) 2 ] (1). The complex was characterized by melting point (m.p.), Fourier Transform-Infra Red (FT-IR) and Nuclear Magnetic Resonance of hydrogen nucleus ( 1 H NMR) spectroscopy. The formula of 1 was determined by X-ray fluorescence (XRF) analysis. The retention of the structure in solution was confirmed by 1 H NMR spectroscopy. The antimicrobial activity of the complex has been studied against the bacteria Pseudomonas aeruginosa (PAO1). The Minimum Inhibitory Concentrations (MIC) of the compounds 1 and Curc against P. aeruginosa (PAO1) are: 71.3μΜ (75.3μg/mL) for [ZnI 2 (Curc) 2 ] and 339μM (125μg/mL) for Curc, respectively. Moreover, the antimicrobial activity of the new material which was diffused in polystyrene against biofilm formed by PAO1 was also calculated. Copyright © 2017 Elsevier B.V. All rights reserved.

  17. Development of Equivalent Material Properties of Microbump for Simulating Chip Stacking Packaging.

    PubMed

    Lee, Chang-Chun; Tzeng, Tzai-Liang; Huang, Pei-Chen

    2015-08-07

    three-dimensional integrated circuit (3D-IC) structure with a significant scale mismatch causes difficulty in analytic model construction. This paper proposes a simulation technique to introduce an equivalent material composed of microbumps and their surrounding wafer level underfill (WLUF). The mechanical properties of this equivalent material, including Young's modulus (E), Poisson's ratio, shear modulus, and coefficient of thermal expansion (CTE), are directly obtained by applying either a tensile load or a constant displacement, and by increasing the temperature during simulations, respectively. Analytic results indicate that at least eight microbumps at the outermost region of the chip stacking structure need to be considered as an accurate stress/strain contour in the concerned region. In addition, a factorial experimental design with analysis of variance is proposed to optimize chip stacking structure reliability with four factors: chip thickness, substrate thickness, CTE, and E-value. Analytic results show that the most significant factor is CTE of WLUF. This factor affects microbump reliability and structural warpage under a temperature cycling load and high-temperature bonding process. WLUF with low CTE and high E-value are recommended to enhance the assembly reliability of the 3D-IC architecture.

  18. Progress in mass spectrometry for the analysis of set-off phenomena in plastic food packaging materials.

    PubMed

    Aznar, Margarita; Alfaro, Pilar; Nerín, Cristina; Jones, Emrys; Riches, Eleanor

    2016-07-01

    In most cases, food packaging materials contain inks whose components can migrate to food by diffusion through the material as well as by set-off phenomena. In this work, different mass spectrometry approaches had been used in order to identify and confirm the presence of ink components in ethanol (95%) and Tenax(®) as food simulants. Three different sets of materials, manufactured with different printing technologies and with different structures, were analyzed. Sample analysis by ultra performance liquid chromatography mass spectrometry (UPLC-MS), using a quadrupole-time of flight (Q-TOF) as a mass analyser proved to be an excellent tool for identification purposes while ion mobility mass spectrometry (IM-MS) shown to be very useful for the confirmation of the candidates proposed. The results showed the presence of different non-volatile ink components in migration such as colorants (Solvent Red 49), plasticizers (dimethyl sebacate, tributyl o-acetyl citrate) or surfactants (SchercodineM, triethylene glycol caprilate). An oxidation product of an ink additive (triphenyl phosphine oxide) was also detected. In addition, a surface analysis technique, desorption electrospray mass spectrometry (DESI-MS), was used for analyzing the distribution of some ink components (tributyl o-acetyl citrate Schercodine L, phthalates) in the material. The detection of some of these compounds in the back-printed side confirmed the transference of this compound from the non-food to the food contact side. The results also showed that concentration of ink migrants decreased when an aluminum or polypropylene layer covered the ink. When aluminum was used, concentration of most of ink migrants decreased, and for 5 out of the 9 even disappeared. Copyright © 2016 Elsevier B.V. All rights reserved.

  19. Pyrolysis of plastic packaging waste: A comparison of plastic residuals from material recovery facilities with simulated plastic waste

    SciTech Connect

    Adrados, A., E-mail: aitziber_adrados@ehu.es; Marco, I. de; Caballero, B.M.

    2012-05-15

    Highlights: Black-Right-Pointing-Pointer Pyrolysis of plastic waste. Black-Right-Pointing-Pointer Comparison of different samples: real waste, simulated and real waste + catalyst. Black-Right-Pointing-Pointer Study of the effects of inorganic components in the pyrolysis products. - Abstract: Pyrolysis may be an alternative for the reclamation of rejected streams of waste from sorting plants where packing and packaging plastic waste is separated and classified. These rejected streams consist of many different materials (e.g., polyethylene (PE), polypropylene (PP), polystyrene (PS), polyvinyl chloride (PVC), polyethylene terephthalate (PET), acrylonitrile butadiene styrene (ABS), aluminum, tetra-brik, and film) for which an attempt at complete separation is not technically possible ormore » economically viable, and they are typically sent to landfills or incinerators. For this study, a simulated plastic mixture and a real waste sample from a sorting plant were pyrolyzed using a non-stirred semi-batch reactor. Red mud, a byproduct of the aluminum industry, was used as a catalyst. Despite the fact that the samples had a similar volume of material, there were noteworthy differences in the pyrolysis yields. The real waste sample resulted, after pyrolysis, in higher gas and solid yields and consequently produced less liquid. There were also significant differences noted in the compositions of the compared pyrolysis products.« less

  20. The potential role of polymethyl methacrylate as a new packaging material for the implantable medical device in the bladder.

    PubMed

    Kim, Su Jin; Choi, Bumkyoo; Kim, Kang Sup; Bae, Woong Jin; Hong, Sung Hoo; Lee, Ji Youl; Hwang, Tae-Kon; Kim, Sae Woong

    2015-01-01

    Polydimethylsiloxane (PDMS) is used in implantable medical devices; however, PDMS is not a completely biocompatible material for electronic medical devices in the bladder. To identify novel biocompatible materials for intravesical implanted medical devices, we evaluated the biocompatibility of polymethyl methacrylate (PMMA) by analyzing changes in the levels of macrophages, macrophage migratory inhibitory factor (MIF), and inflammatory cytokines in the bladder. A ball-shaped metal coated with PMMA or PDMS was implanted into the bladders of rats, and after intravesical implantation, the inflammatory changes induced by the foreign body reaction were evaluated. In the early period after implantation, increased macrophage activity and MIF in the urothelium of the bladder were observed. However, significantly decreased macrophage activity and MIF in the bladder were observed after implantation with PMMA- or PDMS-coated metal in the later period. In addition, significantly decreased inflammatory cytokines such as IL-1β, IL-6, and TNF-α were observed with time. Based on these results, we suggest that MIF plays a role in the foreign body reaction and in the biocompatible packaging with PMMA for the implanted medical devices in the bladder.

  1. Potential of the polymer poly-[2-(tert-butylamino) methylstyrene] as antimicrobial packaging material for meat products.

    PubMed

    Dohlen, S; Braun, C; Brodkorb, F; Fischer, B; Ilg, Y; Kalbfleisch, K; Lorenz, R; Robers, O; Kreyenschmidt, M; Kreyenschmidt, J

    2016-10-01

    The objective of the study was to investigate the antimicrobial potential of a new SAM(®) polymer poly(TBAMS) as packaging material for meat products. The influence of temperature, time and product factors on the antimicrobial activity of poly(TBAMS) against different bacteria was determined using a modified test method based on the Japanese Industrial Standard 2801:2000. Results showed a significant reduction in bacterial counts on poly(TBAMS) compared with the reference material of several meat-specific micro-organisms after 24 h at 7°C. Bacterial counts of Staphylococcus aureus, Listeria monocytogenes, Lactobacillus spp., Brochothrix thermosphacta and Escherichia coli were reduced by >4·0 log10  units. Pseudomonas fluorescens was less sensitive to poly(TBAMS) within 24 h between 2 and 7°C. Prolonging the storage time to 48 h, however, resulted in an increased reduction rate. Furthermore, antimicrobial activity was also observed if meat components in the form of meat extract, meat juice or bovine serum albumin protein were present. Antimicrobial activity was also achieved if inoculated with mixed cultures. Poly(TBAMS) showed antimicrobial properties under conditions typical for meat supply chains. Poly(TBAMS) bears a high potential to increase safety and shelf life of meat products. © 2016 The Society for Applied Microbiology.

  2. The Potential Role of Polymethyl Methacrylate as a New Packaging Material for the Implantable Medical Device in the Bladder

    PubMed Central

    Kim, Su Jin; Choi, Bumkyoo; Kim, Kang Sup; Bae, Woong Jin; Hong, Sung Hoo; Lee, Ji Youl; Hwang, Tae-Kon; Kim, Sae Woong

    2015-01-01

    Polydimethylsiloxane (PDMS) is used in implantable medical devices; however, PDMS is not a completely biocompatible material for electronic medical devices in the bladder. To identify novel biocompatible materials for intravesical implanted medical devices, we evaluated the biocompatibility of polymethyl methacrylate (PMMA) by analyzing changes in the levels of macrophages, macrophage migratory inhibitory factor (MIF), and inflammatory cytokines in the bladder. A ball-shaped metal coated with PMMA or PDMS was implanted into the bladders of rats, and after intravesical implantation, the inflammatory changes induced by the foreign body reaction were evaluated. In the early period after implantation, increased macrophage activity and MIF in the urothelium of the bladder were observed. However, significantly decreased macrophage activity and MIF in the bladder were observed after implantation with PMMA- or PDMS-coated metal in the later period. In addition, significantly decreased inflammatory cytokines such as IL-1β, IL-6, and TNF-α were observed with time. Based on these results, we suggest that MIF plays a role in the foreign body reaction and in the biocompatible packaging with PMMA for the implanted medical devices in the bladder. PMID:25705692

  3. Thermodynamic analysis of water vapor sorption isotherms and mechanical properties of selected paper-based food packaging materials.

    PubMed

    Rhim, Jong-Whan; Lee, Jun Ho

    2009-01-01

    Adsorption isotherms of 3 selected paper-based packaging materials, that is, vegetable parchment (VP) paper, Kraft paper, and solid-bleached-sulfate (SBS) paperboard, were determined at 3 different temperatures (25, 40, and 50 degrees C). The GAB isotherm model was found to fit adequately for describing experimental adsorption isotherm data for the paper samples. The monolayer moisture content of the paper samples decreased with increase in temperature, which is in the range of 0.0345 to 0.0246, 0.0301 to 0.0238, and 0.0318 to 0.0243 g water/g solid for the MG paper, the Kraft paper, and the SBS paperboard, respectively. The net isosteric heats of sorption (q(st)) for the paper samples decreased exponentially with increase in moisture content after reaching the maximum values of 18.51, 27.39, and 26.80 kJ/mol for the VP paper, the Kraft paper, and the SBS paperboard, respectively, at low-moisture content. The differential enthalpy and entropy of 3 paper samples showed compensation phenomenon with the isokinetic temperature of 399.7 K indicating that water vapor had been adsorbed onto the paper samples with the same mechanism. Depending on the paper material, tensile strength of paper samples was affected by moisture content.

  4. Pyrolysis of plastic packaging waste: A comparison of plastic residuals from material recovery facilities with simulated plastic waste.

    PubMed

    Adrados, A; de Marco, I; Caballero, B M; López, A; Laresgoiti, M F; Torres, A

    2012-05-01

    Pyrolysis may be an alternative for the reclamation of rejected streams of waste from sorting plants where packing and packaging plastic waste is separated and classified. These rejected streams consist of many different materials (e.g., polyethylene (PE), polypropylene (PP), polystyrene (PS), polyvinyl chloride (PVC), polyethylene terephthalate (PET), acrylonitrile butadiene styrene (ABS), aluminum, tetra-brik, and film) for which an attempt at complete separation is not technically possible or economically viable, and they are typically sent to landfills or incinerators. For this study, a simulated plastic mixture and a real waste sample from a sorting plant were pyrolyzed using a non-stirred semi-batch reactor. Red mud, a byproduct of the aluminum industry, was used as a catalyst. Despite the fact that the samples had a similar volume of material, there were noteworthy differences in the pyrolysis yields. The real waste sample resulted, after pyrolysis, in higher gas and solid yields and consequently produced less liquid. There were also significant differences noted in the compositions of the compared pyrolysis products. Copyright © 2011 Elsevier Ltd. All rights reserved.

  5. Development of a low temperature phase change material package. [for spacecraft thermal control

    NASA Technical Reports Server (NTRS)

    Brennan, P. J.; Suelau, H. J.; Mcintosh, R.

    1977-01-01

    Test data obtained for a low temperature phase change material (PCM) canisters are presented. The canister was designed to provide up to 30 w-hrs of storage capacity at approximately -90 C with an overall thermal conductance which is greater than 8 w/deg C. N-heptane which is an n-paraffin and has a -90.6 C freezing point was used as the working fluid. The canister was fabricated from aluminum and has an aluminum honeycomb core. Its void volume permits service temperatures up to 70 C. Results obtained from component and system's tests indicate well defined melting and freezing points which are repeatable and within 1 C of each other. Subcooling effects are less than 0.5 C and are essentially negligible. Measured storage capacities are within 94 to 88% the theoretical.

  6. The impact of packaging materials on the antioxidant phytochemical stability of aqueous infusions of green tea (Camellia sinensis) and yaupon holly (Ilex vomitoria) during cold storage.

    PubMed

    Kim, Youngmok; Welt, Bruce A; Talcott, Stephen T

    2011-05-11

    Ready to drink (RTD) teas are a growing segment in the beverage category, brought about by improvements in the flavor of these products and healthy market trends driven by consumers. The presented results evaluated the antioxidant phytochemical stability of RTD teas from aqueous infusions of traditional green tea (Camellia sinensis) and a botanical tea from yaupon holly (Ilex vomitoria) as influenced by packaging materials during cold storage. Two common packaging materials for RTD products are glass and polyethylene terephthalate (PET) and have been compared to a retortable pouch (RP), an emerging packaging material for various types of food since it is durable, inexpensive, lightweight, and easy to sterilize. Storage stability was then evaluated for each aqueous infusion prepared at 10 g/L at 90 °C for 10 min and evaluated at 3 °C in the absence of light over 12 weeks. Analyses included quantification and characterization of individual polyphenolics by high-performance liquid chromatography-photodiode array and liquid chromatography-electrospray ionization-mass spectrometry as well as changes in total antioxidant capacity. For green tea, concentrations of the three major flavan-3-ols, epigallocatechin gallate, epigallocatechin, and epicatechin gallate were better retained in glass bottles as compared to other packages over 12 weeks. In yaupon holly, chlorogenic acid and its isomers that were the predominant compounds were generally stable in each packaging material, and a 20.6-fold higher amount of saponin was found as compared to green tea, which caused higher stability of flavonol glycosides present in yaupon holly during storage. The antioxidant capacity of green tea was better retained in glass and PET versus RP, whereas no differences were again observed for yaupon holly. Results highlight the superiority of oxygen-impervious glass packaging, but viable alternatives may be utilizable for RTD teas with variable phytochemical compositions.

  7. Study of the Use of Oxygen-Absorbing Packaging Material to Prolong Shelf-Life of Rations

    DTIC Science & Technology

    2010-05-28

    in MRE26, menu # 10). Oxygen, Packaging, Military Rations, Combat Rations, Meal, Ready-to- Eat (MRE), CORANET Uncalssified U U U U H.-J. Sue 979-845...moisture, pH and rancidity) to determine the acceptability of the packaged rations over time (Phase II). In summary, this packaging technology...rancid over prolonged storage. Rancidity is caused when oxygen combines with fatty acids. The access of oxygen to the food product influences the

  8. Grooming. Learning Activity Package.

    ERIC Educational Resources Information Center

    Stark, Pamela

    This learning activity package on grooming for health workers is one of a series of 12 titles developed for use in health occupations education programs. Materials in the package include objectives, a list of materials needed, information sheets, reviews (self evaluations) of portions of the content, and answers to reviews. These topics are…

  9. Nutrition. Learning Activity Package.

    ERIC Educational Resources Information Center

    Lee, Carolyn

    This learning activity package on nutrition is one of a series of 12 titles developed for use in health occupations education programs. Materials in the package include objectives, a list of materials needed, a list of definitions, information sheets, reviews (self evaluations) of portions of the content, and answers to reviews. These topics are…

  10. Packaging and Transportation Safety

    DOT National Transportation Integrated Search

    1997-01-31

    This Guide supplements the Department of Energy (DOE) Order, DOE O 460.1A, PACKAGING AND TRANSPORTATION SAFETY, 10-2-96, by providing clarifying material for the implementation of packaging and transportation safety of hazardous materials. DOE O 460....

  11. Effectiveness of the International Phytosanitary Standard ISPM No. 15 on reducing wood borer infestation rates in wood packaging material entering the United States

    Treesearch

    Robert A. Haack; Kerry O. Britton; Eckelhard G. Brockerhoff; Joseph F. Cavey; Lynn J. Garrett; Mark Kimberley; Frank Lowenstein; Amelia Nuding; Lars J. Olson; James Tumer; Kathryn N. Vasilaky

    2014-01-01

    Numerous bark- and wood-infesting insects have been introduced to new countries by international trade where some have caused severe environmental and economic damage. Wood packaging material (WPM), such as pallets, is one of the high risk pathways for the introduction of wood pests. International recognition of this risk resulted in adoption of International Standards...

  12. Humanities Resource Center Catalog. A Guide to Speakers, Packaged Programs, and Media Materials Available from the South Dakota Committee on the Humanities.

    ERIC Educational Resources Information Center

    South Dakota Committee on the Humanities, Brookings.

    The purpose of the Humanities Resource Center is to make humanities programs available as efficiently and expeditiously as possible to all organizations in South Dakota. This catalog lists speakers, packaged programs, and audiovisual materials related to various disciplines of the humanities, for example, philosophy, ethics, comparative religion,…

  13. Advancements in meat packaging.

    PubMed

    McMillin, Kenneth W

    2017-10-01

    Packaging of meat provides the same or similar benefits for raw chilled and processed meats as other types of food packaging. Although air-permeable packaging is most prevalent for raw chilled red meat, vacuum and modified atmosphere packaging offer longer shelf life. The major advancements in meat packaging have been in the widely used plastic polymers while biobased materials and their integration into composite packaging are receiving much attention for functionality and sustainability. At this time, active and intelligent packaging are not widely used for antioxidant, antimicrobial, and other functions to stabilize and enhance meat properties although many options are being developed and investigated. The advances being made in nanotechnology will be incorporated into food packaging and presumably into meat packaging when appropriate and useful. Intelligent packaging using sensors for transmission of desired information and prompting of subsequent changes in packaging materials, environments or the products to maintain safety and quality are still in developmental stages. Copyright © 2017 Elsevier Ltd. All rights reserved.

  14. Examining Immediate and Maintenance Effects of a Reading Intervention Package on Generalization Materials: Individual versus Group Implementation

    ERIC Educational Resources Information Center

    Klubnik, Cynthia; Ardoin, Scott P.

    2010-01-01

    Fluency has been identified as an important outcome of effective reading instruction, and intervention packages utilizing the method of repeated readings have been shown to improve oral reading fluency. In order to improve the efficiency of these intervention packages, more research is needed on the effectiveness of small group reading…

  15. Influence of physico-chemical factors on leaching of chemical additives from aluminium foils used for packaging of food materials.

    PubMed

    Ojha, Priyanka; Ojha, C S; Sharma, V P

    2007-01-01

    In recent years, the use of aluminium foils to wrap foodstuff and commodities has been increased to a great extent. Aluminium was found to leach out from the foil in different simulants particularly in distilled water, acidic and alkaline medium at 60 +/- 2 degrees C for 2 hours and 40 +/- 2 degrees C for 24 hours. The migration was found to be above the permissible limit as laid down by WHO guidelines, that is of 0.2 mg/L of water. The protocol used for this study was based on the recommendation of Bureau of Indian Standard regarding the migration of chemical additives from packaging materials used to pack food items. Migration of the aluminium metal was found significantly higher in acidic and aqueous medium in comparison to alcoholic and saline medium. Higher temperature conditions also enhanced the rate of migration of aluminium in acidic and aqueous medium. Leaching of aluminium metal occurred in double distilled water, acetic acid 3%, normal saline and sodium carbonate, except ethanol 8%, in which aluminium migration was below the detection limit of the instrument where three brands of the aluminium foil samples studied.

  16. Shelf-life and colour change kinetics of Aloe vera gel powder under accelerated storage in three different packaging materials.

    PubMed

    Ramachandra, C T; Rao, P Srinivasa

    2013-08-01

    Aloe vera gel powder was produced through dehumidified air drying of Aloe vere gel at optimized conditions of temperature, relative humidity and air velocity of 64 °C, 18% and 0.8 m.s(-1), respectively. The powder was packed in three different packaging materials viz., laminated aluminum foil (AF), biaxially oriented polypropylene (BOPP) and polypropylene (PP). The shelf-life of the powder was predicted on the basis of free flowness of product under accelerated storage condition (38 ± 1 °C, 90 ± 1% relative humidity) and was calculated to be 33.87, 42.58 and 51.05 days in BOPP, PP and AF, respectively. The storage stability of powder in terms of colour change was studied. The magnitude of colour change of Aloe vera gel powder during storage suggests that AF was better than BOPP and PP. The colour change of powder during storage followed first order reaction kinetics with a rate constant of 0.0444 per day for AF, 0.075 per day for BOPP and 0.0498 per day for PP.

  17. Volatile compounds in dry-cured Serrano ham subjected to high pressure processing. Effect of the packaging material.

    PubMed

    Rivas-Cañedo, Ana; Fernández-García, Estrella; Nuñez, Manuel

    2009-06-01

    The effect of high pressure treatment (400MPa, 10min at 12°C) on the volatile profile of Spanish dry-cured Serrano ham, packaged with or without aluminum foil in a multilayer polymeric bag, was investigated. The analysis of the volatile fraction was carried out by dynamic headspace extraction coupled to gas chromatography-mass spectrometry. Pressure treatment only had a slight effect on the volatile fraction of Serrano ham. Most compounds affected by pressurization, such as alkanes (C(9)-C(12)), 2-undecene, 2-nonanone, 1-octen-3-one, 1-heptanol, 2-hexanol, 2-heptanol, ethyl pentanoate, benzaldehyde and styrene, presumably originated from the metabolism of moulds. A significant effect of pressurization on the migration of compounds from the plastic material was found. Linear and branched chain alkanes, alkenes as well as benzene compounds, were generally less abundant in pressurized samples than in untreated samples. A scalping effect was also observed for compounds such as butanal, pentanal, ethyl esters and pyrazines.

  18. Preparation and characterization of chitosan film incorporated with thinned young apple polyphenols as an active packaging material.

    PubMed

    Sun, Lijun; Sun, Jiaojiao; Chen, Lei; Niu, Pengfei; Yang, Xingbin; Guo, Yurong

    2017-05-01

    The objective of this study was to characterize the physical, mechanical and bioactive properties of chitosan film incorporated with thinned young apple polyphenols (YAP). The results indicated that the addition of YAP resulted in a significant increase in the thickness, density, swelling degree, solubility and opacity of chitosan film, but the water content, water vapor permeability and mechanical properties of the film were decreased. Besides, the antioxidant and antimicrobial properties of chitosan film were significantly enhanced by YAP. Both the NMR and FTIR spectra indicated the interactions between YAP and chitosan were likely to be non-covalent. Furthermore, the thermal stability of the film was decreased by YAP addition, suggested by DSC. Interestingly, the changing tendency of crystalline degree indicated by X-ray kept pace with that of thermal stability for YAP-chitosan films. Overall, YAP-chitosan film was shown a potential as a bioactive packaging material to extend food shelf-life. Copyright © 2017 Elsevier Ltd. All rights reserved.

  19. Chitosan nanocomposite films based on Ag-NP and Au-NP biosynthesis by Bacillus Subtilis as packaging materials.

    PubMed

    Youssef, Ahmed M; Abdel-Aziz, Mohamed S; El-Sayed, Samah M

    2014-08-01

    Chitosan-silver (CS-Ag) and Chitosan-gold (CS-Au) nanocomposites films were synthesized by a simple chemical method. A local bacterial isolate identified as Bacillus subtilis ss subtilis was found to be capable to synthesize both silver nanoparticles (Ag-NP) and gold nanoparticles (Au-NP) from silver nitrate (AgNO3) and chloroauric acid (AuCl(4-)) solutions, respectively. The biosynthesis of both Ag-NP and Au-NP characterize using UV/vis spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray diffraction (XRD), and then added to chitosan by different ratios (0.5, 1 and 2%). The prepared chitosan nanocomposites films were characterize using UV, XRD, SEM and TEM. Moreover, the antibacterial activity of the prepared films was evaluated against gram positive (Staphylococcus aureus) and gram negative bacteria (Pseudomonas aerugenosa), fungi (Aspergillus niger) and yeast (Candida albicans). Therefore, these materials can be potential used as antimicrobial agents in packaging applications. Copyright © 2014 Elsevier B.V. All rights reserved.

  20. Preparation of ecofriendly UV-protective food packaging material by starch/TiO2 bio-nanocomposite: Characterization.

    PubMed

    Goudarzi, Vahid; Shahabi-Ghahfarrokhi, Iman; Babaei-Ghazvini, Amin

    2017-02-01

    In this study, ecofriendly starch/TiO 2 bio-nanocomposites were produced using with different nano-TiO 2 (TiO 2 ) content (1, 3, and 5 (wt%)). Physical, mechanical, thermal, water-vapor permeability (WVP) properties and UV transmittance were investigated. Our results showed that the increasing TiO 2 content increased the hydrophobicity of starch/TiO 2 films. WVP of the bio-nanocomposites was reduced, simultaneously. With increasing TiO 2 content, tensile strength and Young's modulus of the film specimens were reduced while elongation at break and tensile energy to break were increased. The thermal properties of specimens showed that glass transition temperature of the films increased but melting point of the specimen films was decreased by increasing TiO 2 content. Scanning electron microscopy observations demonstrated, the most of films' physical properties were in relation to their microstructures. The starch/TiO 2 nanocomposites effectively protect goods against UV light, and could potentially be applied as UV-shielding packaging materials. Copyright © 2016 Elsevier B.V. All rights reserved.

  1. Extension of the sorting instructions for household plastic packaging and changes in exposure to bioaerosols at materials recovery facilities.

    PubMed

    Schlosser, O; Déportes, I Z; Facon, B; Fromont, E

    2015-12-01

    The aim of this study was to assess how extending the sorting instructions for plastic packaging would affect the exposure of workers working at materials recovery facility (MRF) to dust, endotoxins, fungi and bacteria, taking into consideration other factors that could have an influence on this exposure. Personal sampling was carried out at four MRFs during six sampling campaigns at each facility, both in sorting rooms and when the workers were involved in "mobile tasks" away from the rooms. The data was analysed by describing the extension of sorting instructions both using a qualitative variable (after vs before) and using data for the pots and trays recycling stream, including or excluding plastic film. Overall, before the extension of the sorting guidelines, the geometric mean of personal exposure levels in sorting rooms was 0.3mg/m(3) for dust, 27.7 EU/m(3) for endotoxins, 13,000 CFU/m(3) for fungi and 1800 CFU/m(3) for bacteria. When workers were involved in mobile tasks away from the rooms, these averages were 0.5mg/m(3), 25.7 EU/m(3), 28,000 CFU/m(3) and 5100 CFU/m(3) respectively.The application by households of instructions to include pots, trays and film with other recyclable plastic packaging led to an increase in exposure to endotoxins, fungi and bacteria at MRFs. For an increase of 0.5 kg per inhabitant per year in the pots, trays and film recycling stream, exposure in sorting rooms rose by a factor of 1.4-2.2, depending on the biological agent. Exposure during mobile tasks increased by a factor of 3.0-3.6. The age of the waste amplified the effect of the extension of sorting instructions on exposure to fungi, bacteria and endotoxins. Factors that had a significant influence on the exposure of workers to dust and/or bioaerosols included the presence of paper, newspapers and magazines in the sorted waste, the order in which incoming waste was treated and the quality of the ventilation system in the sorting rooms. The levels of exposure observed in

  2. Reflective Packaging

    NASA Technical Reports Server (NTRS)

    1994-01-01

    The aluminized polymer film used in spacecraft as a radiation barrier to protect both astronauts and delicate instruments has led to a number of spinoff applications. Among them are aluminized shipping bags, food cart covers and medical bags. Radiant Technologies purchases component materials and assembles a barrier made of layers of aluminized foil. The packaging reflects outside heat away from the product inside the container. The company is developing new aluminized lines, express mailers, large shipping bags, gel packs and insulated panels for the building industry.

  3. Polydopamine-Gelatin as Universal Cell-Interactive Coating for Methacrylate-Based Medical Device Packaging Materials: When Surface Chemistry Overrules Substrate Bulk Properties.

    PubMed

    Van De Walle, Elke; Van Nieuwenhove, Ine; Vanderleyden, Els; Declercq, Heidi; Gellynck, Karolien; Schaubroeck, David; Ottevaere, Heidi; Thienpont, Hugo; De Vos, Winnok H; Cornelissen, Maria; Van Vlierberghe, Sandra; Dubruel, Peter

    2016-01-11

    Despite its widespread application in the fields of ophthalmology, orthopedics, and dentistry and the stringent need for polymer packagings that induce in vivo tissue integration, the full potential of poly(methyl methacrylate) (PMMA) and its derivatives as medical device packaging material has not been explored yet. We therefore elaborated on the development of a universal coating for methacrylate-based materials that ideally should reveal cell-interactivity irrespective of the polymer substrate bulk properties. Within this perspective, the present work reports on the UV-induced synthesis of PMMA and its more flexible poly(ethylene glycol) (PEG)-based derivative (PMMAPEG) and its subsequent surface decoration using polydopamine (PDA) as well as PDA combined with gelatin B (Gel B). Successful application of both layers was confirmed by multiple surface characterization techniques. The cell interactivity of the materials was studied by performing live-dead assays and immunostainings of the cytoskeletal components of fibroblasts. It can be concluded that only the combination of PDA and Gel B yields materials possessing similar cell interactivities, irrespective of the physicochemical properties of the underlying substrate. The proposed coating outperforms both the PDA functionalized and the pristine polymer surfaces. A universal cell-interactive coating for methacrylate-based medical device packaging materials has thus been realized.

  4. A Compilation of Metals and Trace Elements Extracted from Materials Relevant to Pharmaceutical Applications such as Packaging Systems and Devices.

    PubMed

    Jenke, Dennis; Rivera, Christine; Mortensen, Tammy; Amin, Parul; Chacko, Molly; Tran, Thang; Chum, James

    2013-01-01

    Nearly 100 individual test articles, representative of materials used in pharmaceutical applications such as packaging and devices, were extracted under exaggerated conditions and the levels of 32 metals and trace elements (Ag, Al, As, B, Ba, Be, Bi, Ca, Cd, Co, Cr, Cu, Fe, Ge, Li, Mg, Mn, Mo, Na, Ni, P, Pb, S, Sb, Se, Si, Sn, Sr, Ti, V, Zn, and Zr) were measured in the extracts. The extracting solvents included aqueous mixtures at low and high pH and an organic solvent mixture (40/60 ethanol water). The sealed vessel extractions were performed by placing an appropriate portion of the test articles and an appropriate volume of extracting solution in inert extraction vessels and exposing the extraction units (and associated extraction blanks) to defined conditions of temperature and duration. The levels of extracted target elements were measured by inductively coupled plasma atomic emission spectroscopy. The overall reporting threshold for most of the targeted elements was 0.05 μg/mL, which corresponds to 0.5 μg/g for the most commonly utilized extraction stoichiometry (1 g of material per 10 mL of extracting solvent). The targeted elements could be classified into four major groups depending on the frequency with which they were present in the over 250 extractions reported in this study. Thirteen elements (Ag, As, Be, Cd, Co, Ge, Li, Mo, Ni, Sn, Ti, V, and Zr) were not extracted in reportable quantities from any of the test articles under any of the extraction conditions. Eight additional elements (Bi, Cr, Cu, Mn, Pb, Sb, Se, and Sr) were rarely extracted from the test articles at reportable levels, and three other elements (Ba, Fe, and P) were infrequently extracted from the test articles at reportable levels. The remaining eight elements (Al, B, Ca, Mg, Na, S, Si, and Zn) were more frequently present in the extracts in reportable quantities. These general trends in accumulation behavior were compared to compiled lists of elements of concern as impurities in

  5. Food packages for Space Shuttle

    NASA Technical Reports Server (NTRS)

    Fohey, M. F.; Sauer, R. L.; Westover, J. B.; Rockafeller, E. F.

    1978-01-01

    The paper reviews food packaging techniques used in space flight missions and describes the system developed for the Space Shuttle. Attention is directed to bite-size food cubes used in Gemini, Gemini rehydratable food packages, Apollo spoon-bowl rehydratable packages, thermostabilized flex pouch for Apollo, tear-top commercial food cans used in Skylab, polyethylene beverage containers, Skylab rehydratable food package, Space Shuttle food package configuration, duck-bill septum rehydration device, and a drinking/dispensing nozzle for Space Shuttle liquids. Constraints and testing of packaging is considered, a comparison of food package materials is presented, and typical Shuttle foods and beverages are listed.

  6. Raman spectroscopy, electronic microscopy and SPME-GC-MS to elucidate the mode of action of a new antimicrobial food packaging material.

    PubMed

    Clemente, Isabel; Aznar, Margarita; Salafranca, Jesús; Nerín, Cristina

    2017-02-01

    One critical challenge when developing a new antimicrobial packaging material is to demonstrate the mode of action of the antimicrobials incorporated into the packaging. For this task, several analytical techniques as well as microbiology are required. In this work, the antimicrobial properties of benzyl isothiocyanate, allyl isothiocyanate and essential oils of cinnamon and oregano against several moulds and bacteria have been evaluated. Benzyl isothiocyanate showed the highest antimicrobial activity and it was selected for developing the new active packaging material. Scanning electron microscopy and Raman spectroscopy were successfully used to demonstrate the mode of action of benzyl isothiocyanate on Escherichia coli. Bacteria exhibited external modifications such as oval shape and the presence of septum surface, but they did not show any disruption or membrane damage. To provide data on the in vitro action of benzyl isothiocyanate and the presence of inhibition halos, the transfer mechanism to the cells was assessed using solid-phase microextraction-gas chromatography-mass spectrometry. Based on the transfer system, action mechanism and its stronger antimicrobial activity, benzyl isothiocyanate was incorporated to two kinds of antimicrobial labels. The labels were stable and active for 140 days against two mould producers of ochratoxin A; Penicillium verrucosum is more sensitive than Aspergillus ochraceus. Details about the analytical techniques and the results obtained are shown and discussed. Graphical Abstract Antimicrobial evaluation of pure compounds, incorporation in the packaging and study for mode of action on S. coli by Raman, SEM and SPME-GC-MS.

  7. ONGOING INVESTIGATION OF THE EFFECT THAT DRUGSTORE BEETLES HAVE ON CELOTEX ASSEMBLIES FOUND WITHIN RADIOACTIVE MATERIAL PACKAGINGS

    SciTech Connect

    Loftin, B.

    2009-06-08

    During normal operations at the Department of Energy's Hanford Site in Hanford, WA, drugstore beetles were found within the fiberboard subassemblies of two 9975 Shipping Packages. The Department of Energy's Packaging Certification Program (EM-60) directed a thorough investigation to determine if the drugstore beetles were causing damage that would be detrimental to the safety performance of the Celotex. The Savannah River National Laboratory is continuing to conduct the investigation with entomological expertise being provided by Clemson University. The outcome from the investigation conducted over the previous year was that no discernible damage had been caused by the drugstore beetles. Onemore » of the two packages has been essentially untouched over the past year and has only been opened to visually inspect for additional damage. This paper will provide details and results of the ongoing investigation of that package.« less

  8. 49 CFR 173.203 - Non-bulk packagings for liquid hazardous materials in Packing Group III.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... than steel or aluminum: 4N Inner packagings: Glass or earthenware receptacles Plastic receptacles Metal receptacles Glass ampoules (c) The following single packagings are authorized: Steel drum: 1A1 or 1A2 Aluminum... jerrican: 3B1 or 3B2 Plastic receptacle in steel, aluminum, fiber or plastic drum: 6HA1, 6HB1, 6HG1 or 6HH1...

  9. 49 CFR 173.203 - Non-bulk packagings for liquid hazardous materials in Packing Group III.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... than steel or aluminum: 4N Inner packagings: Glass or earthenware receptacles Plastic receptacles Metal receptacles Glass ampoules (c) The following single packagings are authorized: Steel drum: 1A1 or 1A2 Aluminum... jerrican: 3B1 or 3B2 Plastic receptacle in steel, aluminum, fiber or plastic drum: 6HA1, 6HB1, 6HG1 or 6HH1...

  10. Background studies in support of a feasibility assessment on the use of copper-base materials for nuclear waste packages in a repository in tuff

    SciTech Connect

    Van Konynenburg, R.A.; Kundig, K.J.A.; Lyman, W.S.

    1990-06-01

    This report combines six work units performed in FY`85--86 by the Copper Development Association and the International Copper Research Association under contract with the University of California. The work includes literature surveys and state-of-the-art summaries on several considerations influencing the feasibility of the use of copper-base materials for fabricating high-level nuclear waste packages for the proposed repository in tuff rock at Yucca Mountain, Nevada. The general conclusion from this work was that copper-base materials are viable candidates for inclusion in the materials selection process for this application. 55 refs., 48 figs., 22 tabs.

  11. Effect of different packaging materials containing poly-[2-(tert-butylamino) methylstyrene] on the growth of spoilage and pathogenic bacteria on fresh meat.

    PubMed

    Dohlen, S; Braun, C; Brodkorb, F; Fischer, B; Ilg, Y; Kalbfleisch, K; Lorenz, R; Kreyenschmidt, M; Kreyenschmidt, J

    2017-09-18

    The objective of this study was to investigate the effect of novel antimicrobial packaging materials containing poly-[2-(tertbutylamino) methylstyrene] (poly(TBAMS)) on the growth of typical spoilage and pathogenic bacteria present on meat. The antimicrobial activity of materials containing different poly(TBAMS) concentrations was determined by comparing the bacterial counts on reference and sample materials at different temperatures and times and in the presence of meat components. Storage tests with poultry fillets and veal cutlets were conducted with samples vacuum packaged in the reference foil and foil containing 10% poly(TBAMS). After specific time intervals, typical spoilage microorganisms, total viable count (TVC), sensory changes and pH value were analysed. The results of the different poly(TBAMS) containing packaging materials showed an increase of the antimicrobial activity with an increasing amount of poly(TBAMS) in the base polymer. A high antimicrobial activity against inoculum of spoilage and pathogenic organisms typical for meat products was detected of a multilayer foil containing 10% poly(TBAMS) in the inner layer after 24h at 7°C. Gram positive-bacteria were more sensitive to poly(TBAMS) foil than gram-negative bacteria. In storage tests however, over the entire storage, a significant effect of this poly(TBAMS) foil on microbial growth on chicken breast fillets and veal cutlets could not be identified. Poly(TBAMS) packaging materials showed very good antimicrobial properties against a wide range of bacteria. However, for a significant inhibition of microbial growth on fresh meat, a higher amount of poly(TBAMS) was necessary to prolong the shelf life of meat. Copyright © 2017 Elsevier B.V. All rights reserved.

  12. A compilation of safety impact information for extractables associated with materials used in pharmaceutical packaging, delivery, administration, and manufacturing systems.

    PubMed

    Jenke, Dennis; Carlson, Tage

    2014-01-01

    Demonstrating suitability for intended use is necessary to register packaging, delivery/administration, or manufacturing systems for pharmaceutical products. During their use, such systems may interact with the pharmaceutical product, potentially adding extraneous entities to those products. These extraneous entities, termed leachables, have the potential to affect the product's performance and/or safety. To establish the potential safety impact, drug products and their packaging, delivery, or manufacturing systems are tested for leachables or extractables, respectively. This generally involves testing a sample (either the extract or the drug product) by a means that produces a test method response and then correlating the test method response with the identity and concentration of the entity causing the response. Oftentimes, analytical tests produce responses that cannot readily establish the associated entity's identity. Entities associated with un-interpretable responses are termed unknowns. Scientifically justifiable thresholds are used to establish those individual unknowns that represent an acceptable patient safety risk and thus which do not require further identification and, conversely, those unknowns whose potential safety impact require that they be identified. Such thresholds are typically based on the statistical analysis of datasets containing toxicological information for more or less relevant compounds. This article documents toxicological information for over 540 extractables identified in laboratory testing of polymeric materials used in pharmaceutical applications. Relevant toxicological endpoints, such as NOELs (no observed effects), NOAELs (no adverse effects), TDLOs (lowest published toxic dose), and others were collated for these extractables or their structurally similar surrogates and were systematically assessed to produce a risk index, which represents a daily intake value for life-long intravenous administration. This systematic approach

  13. LC-MS/MS analytical procedure to quantify tris(nonylphenyl)phosphite, as a source of the endocrine disruptors 4-nonylphenols, in food packaging materials.

    PubMed

    Mottier, Pascal; Frank, Nancy; Dubois, Mathieu; Tarres, Adrienne; Bessaire, Thomas; Romero, Roman; Delatour, Thierry

    2014-01-01

    Tris(nonylphenyl)phosphite, an antioxidant used in polyethylene resins for food applications, is problematic since it is a source of the endocrine-disrupting chemicals 4-nonylphenols (4NP) upon migration into packaged foods. As a response to concerns surrounding the presence of 4NP-based compounds in packaging materials, some resin producers and additive suppliers have decided to eliminate TNPP from formulations. This paper describes an analytical procedure to verify the "TNPP-free" statement in multilayer laminates used for bag-in-box packaging. The method involves extraction of TNPP from laminates with organic solvents followed by detection/quantification by LC-MS/MS using the atmospheric pressure chemical ionisation (APCI) mode. A further acidic treatment of the latter extract allows the release of 4NP from potentially extracted TNPP. 4NP is then analysed by LC-MS/MS using electrospray ionisation (ESI) mode. This two-step analytical procedure ensures not only TNPP quantification in laminates, but also allows the flagging of other possible sources of 4NP in such packaging materials, typically as non-intentionally added substances (NIAS). The limits of quantification were 0.50 and 0.48 µg dm⁻² for TNPP and 4NP in laminates, respectively, with recoveries ranging between 87% and 114%. Usage of such analytical methodologies in quality control operations has pointed to a lack of traceability at the packaging supplier level and cross-contamination of extrusion equipment at the converter level, when TNPP-containing laminates are processed on the same machine beforehand.

  14. Effects of packaging materials on the aroma stability of Thai 'tom yam' seasoning powder as determined by descriptive sensory analysis and gas chromatography-mass spectrometry.

    PubMed

    Leelaphiwat, Pattarin; Harte, Janice B; Auras, Rafael A; Ong, Peter Kc; Chonhenchob, Vanee

    2017-04-01

    Changes in the aroma characteristics of Thai 'tom yam' seasoning powder, containing lemongrass, galangal and kaffir lime leaf, as affected by different packaging materials were assessed using quantitative descriptive analysis (QDA) and gas chromatography-mass spectrometry (GC-MS). The descriptive aroma attributes for lemongrass, galangal and kaffir lime leaf powders were developed by the QDA panel. The mixed herb and spice seasoning powder was kept in glass jars closed with different packaging materials (Nylon 6, polyethylene terephthalate (PET) and polylactic acid (PLA)) stored at 38 °C (accelerated storage condition), and evaluated by the trained QDA panel during storage for 49 days. The descriptive words for Thai 'tom yam' seasoning powder developed by the trained panelists were lemongrass, vinegary and leafy for lemongrass, galangal and kaffir lime leaf dried powder, respectively. The aroma intensities significantly (P ≤ 0.05) decreased with increased storage time. However, the intensity scores for aroma attributes were not significantly (P > 0.05) different among the packaging materials studied. The major components in Thai 'tom yam' seasoning powder, quantified by GC-MS, were estragole, bicyclo[3.1.1]heptane, β-bisabolene, benzoic acid and 2-ethylhexyl salicylate. The concentrations of major aroma compounds significantly (P ≤ 0.05) decreased with storage time. Aroma stability of Thai 'tom yam' powder can be determined by descriptive sensory evaluation and GC-MS analysis. Nylon, PET and PLA exhibited similar aroma barrier properties against key aroma compounds in Thai 'tom yam'. This information can be used for prediction of aroma loss through packaging materials during storage of Thai 'tom yam'. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

  15. Fortification of instant coffee beverages - influence of functional ingredients, packaging material and storage time on physical properties of newly formulated, enriched instant coffee powders.

    PubMed

    Benković, Maja; Srečec, Siniša; Špoljarić, Igor; Mršić, Gordan; Bauman, Ingrid

    2015-10-01

    Consumer demands for healthy, functional foods are growing rapidly nowadays. Coffee, as one of the most widespread commodities, represents an interesting aspect for enrichment, since it is consumed by millions of people on a daily basis. The aim of this study was to formulate enriched instant coffee powders with the purpose of estimating the influence of storage time, functional ingredients and packaging material on physical and sensory properties of the mixtures. Storage time of 6 months significantly (P <0.05) influenced moisture content of the mixtures, which rose linearly with an increase in storage time. Packaging material proved to be an important variable affecting moisture content, particle size, colour and cohesion index. Functional ingredients (vitamins A and C, iron, inulin and oligofructose) influenced particle size, dispersibility, wettability and, in terms of sensory analysis, grades for aftertaste, chemical taste and overall acceptability. Addition of functional ingredients significantly influenced some particle size distribution parameters and reconstitution properties, causing an increase in wettability and dispersibility times. Furthermore, in sensory terms, it influenced aftertaste and chemical taste grades. Packaging material significantly influenced moisture content, some particle size distribution parameters, colour and cohesion index. © 2014 Society of Chemical Industry.

  16. Effects of self-carbon dioxide-generation material for active packaging on pH, water-holding capacity, meat color, lipid oxidation and microbial growth in beef during cold storage.

    PubMed

    Lee, Seung-Jae; Lee, Seung Yun; Kim, Gap-Don; Kim, Geun-Bae; Jin, Sang Keun; Hur, Sun Jin

    2017-08-01

    Active packaging refers to the mixing of additive agents into packaging materials with the purpose of maintaining or extending food product quality and shelf life. The aim of this study was to develop an easy and cheap active packaging for beef. Beef loin samples were divided into three packaging groups (C, ziplock bag packaging; T1, vacuum packaging; T2, active packaging) and stored at 4 °C for 21 days. The water-holding capacity was significantly (P < 0.05) higher in C and T2 than in T1 for up to 7 days of storage. The TBARS value was significantly (P < 0.05) lower in T1 and T2 after 7 days of storage. The counts of some microorganism were significantly (P < 0.05) lower in T1 and T2 after 7 days of storage; the total bacterial count and Escherichia coli count were lowest in T2 at the end of storage. These results indicate that active packaging using self-CO 2 -generation materials can extend the shelf life similarly to that observed with vacuum packaging, and that the active packaging method can improve the quality characteristics of beef during cold storage. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

  17. Packaged die heater

    SciTech Connect

    Spielberger, Richard; Ohme, Bruce Walker; Jensen, Ronald J.

    2011-06-21

    A heater for heating packaged die for burn-in and heat testing is described. The heater may be a ceramic-type heater with a metal filament. The heater may be incorporated into the integrated circuit package as an additional ceramic layer of the package, or may be an external heater placed in contact with the package to heat the die. Many different types of integrated circuit packages may be accommodated. The method provides increased energy efficiency for heating the die while reducing temperature stresses on testing equipment. The method allows the use of multiple heaters to heat die to different temperatures. Faultymore » die may be heated to weaken die attach material to facilitate removal of the die. The heater filament or a separate temperature thermistor located in the package may be used to accurately measure die temperature.« less

  18. Packaged die heater

    DOEpatents

    Spielberger, Richard; Ohme, Bruce Walker; Jensen, Ronald J.

    2011-06-21

    A heater for heating packaged die for burn-in and heat testing is described. The heater may be a ceramic-type heater with a metal filament. The heater may be incorporated into the integrated circuit package as an additional ceramic layer of the package, or may be an external heater placed in contact with the package to heat the die. Many different types of integrated circuit packages may be accommodated. The method provides increased energy efficiency for heating the die while reducing temperature stresses on testing equipment. The method allows the use of multiple heaters to heat die to different temperatures. Faulty die may be heated to weaken die attach material to facilitate removal of the die. The heater filament or a separate temperature thermistor located in the package may be used to accurately measure die temperature.

  19. Aging Study Of EPDM O-Ring Material For The H1616 Shipping Package - Three Year Status

    SciTech Connect

    Stefek, T.; Daugherty, W.; Skidmore, E.

    2015-11-05

    This is a 3-year status report for tasks carried out per Task Technical Plan SRNL-STI-2011-00506. A series of tasks/experiments were performed at the Savannah River National Laboratory (SRNL) to monitor the aging performance of ethylene propylene diene monomer (EPDM) O-rings used in the H1616 shipping package. The test data provide a technical basis to extend the annual maintenance of the H1616 shipping package to three years and to predict the life of the EPDM O-rings at the bounding service conditions.

  20. Direct quantitation of volatile organic compounds in packaging materials by headspace solid-phase microextraction-gas chromatography-mass spectrometry.

    PubMed

    Ezquerro, Scar; Pons, Begoña; Tena, María Teresa

    2003-01-24

    The quantification of volatile organic compounds (VOCs) in flexible multilayer packaging materials using headspace solid-phase microextraction-gas chromatography-mass spectrometry (HS-SPME-GC-MS) was studied. The analytes imclude 22 compounds such as aldehydes. ketones, carboxylic acids and hydrocarbons formed by thermooxidative degradation of polyethylene during the extrusion coating process in the manufacture of the packaging, and many of them are involved in the unpleasant and undesirable odour of these materials. External standard calibration using a solution of the analytes in an appropriate solvent was the first approach studied. Aqueous solutions of the analytes provided low reproducibility and the reduction of aldehydes to alcohols under the HS-SPME conditions. Hexadecane was chosen as the solvent since its polarity is similar to that of polyethylene and its volatility is lower than that of the analytes. However, hexadecane should be added to the sample before the analysis as it modifies the absorption capacity of the fibre. A 75-microm Carboxen-poly(dimethylsiloxane) fibre was used to extract the VOCs from the headspace above the packaging in a 15-ml sealed vial at 100 degrees C after 5 min of preincubation. The influence of the extraction time on the amount extracted was studied for a standard solution of the analytes in hexadecane, together with the influence of the volume of the standard solution and the amount of the sample placed in the vial. Standard addition and multiple HS-SPME were also studied as calibration methods and the results obtained in the quantitative analysis of a packaging material were compared.

  1. Human exposure assessment of silver and copper migrating from an antimicrobial nanocoated packaging material into an acidic food simulant.

    PubMed

    Hannon, Joseph Christopher; Kerry, Joseph P; Cruz-Romero, Malco; Azlin-Hasim, Shafrina; Morris, Michael; Cummins, Enda

    2016-09-01

    To examine the human exposure to a novel silver and copper nanoparticle (AgNP and CuNP)/polystyrene-polyethylene oxide block copolymer (PS-b-PEO) food packaging coating, the migration of Ag and Cu into 3% acetic acid (3% HAc) food simulant was assessed at 60 °C for 10 days. Significantly lower migration was observed for Ag (0.46 mg/kg food) compared to Cu (0.82 mg/kg food) measured by inductively coupled plasma - atomic emission spectrometry (ICP-AES). In addition, no distinct population of AgNPs or CuNPs were observed in 3% HAc by nanoparticle tracking analysis (NTA) and transmission electron microscopy (TEM). The predicted human exposure to Ag and Cu was used to calculate a margin of exposure (MOE) for ionic species of Ag and Cu, which indicated the safe use of the food packaging in a hypothetical scenario (e.g. as fruit juice packaging). While migration exceeded regulatory limits, the calculated MOE suggests current migration limits may be conservative for specific nano-packaging applications. Copyright © 2016 Elsevier Ltd. All rights reserved.

  2. 49 CFR 173.213 - Non-bulk packagings for solid hazardous materials in Packing Group III.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... Inner packagings: Glass or earthenware receptacles Plastic receptacles Metal receptacles Glass ampoules..., paper, multiwall, water resistant: 5M2 Plastic receptacle in steel, aluminum, plywood, fiber or plastic drum: 6HA1, 6HB1, 6HD1, 6HG1 or 6HH1 Plastic receptacle in steel, aluminum, wood, plywood or fiberboard...

  3. 49 CFR 173.213 - Non-bulk packagings for solid hazardous materials in Packing Group III.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... Inner packagings: Glass or earthenware receptacles Plastic receptacles Metal receptacles Glass ampoules..., paper, multiwall, water resistant: 5M2 Plastic receptacle in steel, aluminum, plywood, fiber or plastic drum: 6HA1, 6HB1, 6HD1, 6HG1 or 6HH1 Plastic receptacle in steel, aluminum, wood, plywood or fiberboard...

  4. 49 CFR 173.212 - Non-bulk packagings for solid hazardous materials in Packing Group II.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... Inner packagings: Glass or earthenware receptacles Plastic receptacles Metal receptacles Glass ampoules... receptacle in steel, aluminum, plywood, fiber or plastic drum: 6HA1, 6HB1, 6HD1, 6HG1 or 6HH1 Plastic receptacle in steel, aluminum, wood, plywood or fiberboard box: 6HA2, 6HB2, 6HC, 6HD2 or 6HG2 Glass...

  5. 49 CFR 173.212 - Non-bulk packagings for solid hazardous materials in Packing Group II.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... Inner packagings: Glass or earthenware receptacles Plastic receptacles Metal receptacles Glass ampoules... receptacle in steel, aluminum, plywood, fiber or plastic drum: 6HA1, 6HB1, 6HD1, 6HG1 or 6HH1 Plastic receptacle in steel, aluminum, wood, plywood or fiberboard box: 6HA2, 6HB2, 6HC, 6HD2 or 6HG2 Glass...

  6. 49 CFR 173.202 - Non-bulk packagings for liquid hazardous materials in Packing Group II.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ...: 4H1 Solid plastic box: 4H2 Inner packagings: Glass or earthenware receptacles Plastic receptacles Metal receptacles Glass ampoules (c) Except for transportation by passenger aircraft, the following... Steel jerrican: 3A1 or 3A2 Plastic jerrican: 3H1 or 3H2 Aluminum jerrican: 3B1 or 3B2 Plastic receptacle...

  7. 49 CFR 173.202 - Non-bulk packagings for liquid hazardous materials in Packing Group II.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ...: 4H1 Solid plastic box: 4H2 Inner packagings: Glass or earthenware receptacles Plastic receptacles Metal receptacles Glass ampoules (c) Except for transportation by passenger aircraft, the following... Steel jerrican: 3A1 or 3A2 Plastic jerrican: 3H1 or 3H2 Aluminum jerrican: 3B1 or 3B2 Plastic receptacle...

  8. Influence of polymer matrix and adsorption onto silica materials on the migration of alpha-tocopherol into 95% ethanol from active packaging.

    PubMed

    Heirlings, L; Siró, I; Devlieghere, F; Van Bavel, E; Cool, P; De Meulenaer, B; Vansant, E F; Debevere, J

    2004-11-01

    In this study, the effect of polymer materials with different polarity, namely low density polyethylene (LDPE) and ethylene vinyl acetate (EVA), on the migration behaviour of alpha-tocopherol from active packaging was investigated. The antioxidant was also adsorbed onto silica materials, namely SBA-15 (Santa Barbara-15) and Syloblock, in order to protect the antioxidant during extrusion and to ensure a controlled and sufficient release during the shelf-life of the food product. Migration experiments were performed at 7.0 +/- 0.5 degrees C and 95% ethanol was used as fatty food simulant. All films contained a high concentration of alpha-tocopherol, approximately 2000 mg kg(-1), to obtain an active packaging. Polymer matrix had a small influence on the migration profile. The migration of 80% of total migrated amount of antioxidant was retarded for 2.4 days by using LDPE instead of EVA. When alpha-tocopherol was adsorbed onto both silica materials, the migration of 80% of total migrated amount of antioxidant was retarded for 3.4 days in comparison to pure alpha-tocopherol. No difference was seen between the migration profiles of alpha-tocopherol adsorbed onto both silica materials. In the case of pure alpha-tocopherol, 82% of the initial amount of alpha-tocopherol in the film migrated into the food simulant at a rather fast migration rate. In the case of adsorption on silica materials, a total migration was observed. These antioxidative films can have positive food applications.

  9. Development of a headspace solid-phase microextraction-gas chromatography-mass spectrometry method for the identification of odour-causing volatile compounds in packaging materials.

    PubMed

    Ezquerro, Oscar; Pons, Begoña; Tena, María Teresa

    2002-07-19

    A method for the identification of volatile organic compounds in packaging materials is presented in this study. These compounds are formed by thermooxidative degradation during the extrusion coating process in the manufacture of packaging. Headspace solid-phase microextraction (HS-SPME) was used as sample preparation technique prior to the determination of the volatile organic compounds by gas chromatography-mass spectrometry (GC-MS). The effects of extraction variables, such as the type of fibre, the incubation temperature, the pre-incubation time, the size of the vial and the extraction time on the amounts of the extracted volatile compounds were studied. The optimal conditions were found to be: carboxen-polydimethylsiloxane 75 microm fibre, 5 min of pre-incubation time, 100 degrees C of incubation temperature, 20-ml vial, and 15 min of extraction time. The chromatograms obtained by HS-SPME and static headspace extraction were compared in order to show that the HS-SPME method surpasses the static headspace method in terms of sensitivity. Twenty-five compounds were identified including carbonyl compounds (such as 3-methyl-butanal, 3-heptanone or octanal), carboxylic acids (such as pentanoic acid or hexanoic acid) known as odour causing compounds and hydrocarbons (such as decane, undecane or dodecane). Finally, the method was applied to different packaging samples (one odour-unacceptable, two odour-acceptable, and three odourless samples) and to the raw materials in order to find out the odour-responsible volatile organic compounds and their source.

  10. Green Packaging Management of Logistics Enterprises

    NASA Astrophysics Data System (ADS)

    Zhang, Guirong; Zhao, Zongjian

    From the connotation of green logistics management, we discuss the principles of green packaging, and from the two levels of government and enterprises, we put forward a specific management strategy. The management of green packaging can be directly and indirectly promoted by laws, regulations, taxation, institutional and other measures. The government can also promote new investment to the development of green packaging materials, and establish specialized institutions to identify new packaging materials, standardization of packaging must also be accomplished through the power of the government. Business units of large scale through the packaging and container-based to reduce the use of packaging materials, develop and use green packaging materials and easy recycling packaging materials for proper packaging.

  11. Science packages

    NASA Astrophysics Data System (ADS)

    1997-01-01

    Primary science teachers in Scotland have a new updating method at their disposal with the launch of a package of CDi (Compact Discs Interactive) materials developed by the BBC and the Scottish Office. These were a response to the claim that many primary teachers felt they had been inadequately trained in science and lacked the confidence to teach it properly. Consequently they felt the need for more in-service training to equip them with the personal understanding required. The pack contains five disks and a printed user's guide divided up as follows: disk 1 Investigations; disk 2 Developing understanding; disks 3,4,5 Primary Science staff development videos. It was produced by the Scottish Interactive Technology Centre (Moray House Institute) and is available from BBC Education at £149.99 including VAT. Free Internet distribution of science education materials has also begun as part of the Global Schoolhouse (GSH) scheme. The US National Science Teachers' Association (NSTA) and Microsoft Corporation are making available field-tested comprehensive curriculum material including 'Micro-units' on more than 80 topics in biology, chemistry, earth and space science and physics. The latter are the work of the Scope, Sequence and Coordination of High School Science project, which can be found at http://www.gsh.org/NSTA_SSandC/. More information on NSTA can be obtained from its Web site at http://www.nsta.org.

  12. Comparative Packaging Study

    NASA Technical Reports Server (NTRS)

    Perchonok, Michele H.; Oziomek, Thomas V.

    2009-01-01

    Future long duration manned space flights beyond low earth orbit will require the food system to remain safe, acceptable and nutritious. Development of high barrier food packaging will enable this requirement by preventing the ingress and egress of gases and moisture. New high barrier food packaging materials have been identified through a trade study. Practical application of this packaging material within a shelf life test will allow for better determination of whether this material will allow the food system to meet given requirements after the package has undergone processing. The reason to conduct shelf life testing, using a variety of packaging materials, stems from the need to preserve food used for mission durations of several years. Chemical reactions that take place during longer durations may decrease food quality to a point where crew physical or psychological well-being is compromised. This can result in a reduction or loss of mission success. The rate of chemical reactions, including oxidative rancidity and staling, can be controlled by limiting the reactants, reducing the amount of energy available to drive the reaction, and minimizing the amount of water available. Water not only acts as a media for microbial growth, but also as a reactant and means by which two reactants may come into contact with each other. The objective of this study is to evaluate three packaging materials for potential use in long duration space exploration missions.

  13. 49 CFR 173.201 - Non-bulk packagings for liquid hazardous materials in Packing Group I.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ...: 4N Inner packagings: Glass or earthenware receptacles Plastic receptacles Metal receptacles Glass...: 3B1 or 3B2 Plastic receptacle in steel, aluminum, fiber or plastic drum: 6HA1, 6HB1, 6HG1, 6HH1 Plastic receptacle in steel, aluminum, wooden, plywood or fiberboard box: 6HA2, 6HB2, 6HC, 6HD2 or 6HG2...

  14. 49 CFR 173.201 - Non-bulk packagings for liquid hazardous materials in Packing Group I.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ...: 4N Inner packagings: Glass or earthenware receptacles Plastic receptacles Metal receptacles Glass...: 3B1 or 3B2 Plastic receptacle in steel, aluminum, fiber or plastic drum: 6HA1, 6HB1, 6HG1, 6HH1 Plastic receptacle in steel, aluminum, wooden, plywood or fiberboard box: 6HA2, 6HB2, 6HC, 6HD2 or 6HG2...

  15. 49 CFR 173.211 - Non-bulk packagings for solid hazardous materials in Packing Group I.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... Reconstituted wood box: 4F Fiberboard box: 4G Solid plastic box: 4H2 Inner packagings: Glass or earthenware... Aluminum box with liner: 4B Natural wood box, sift proof: 4C2 Plastic receptacle in steel, aluminum... or 1B2 Metal drum other than steel or aluminum: 1N1 or 1N2 Plywood drum: 1D Fiber drum: 1G Plastic...

  16. Future trends in electronic packaging

    NASA Astrophysics Data System (ADS)

    Elshabini, Aicha; Wang, Gangqiang; Barlow, Fred

    2006-03-01

    Electronic packaging is traditionally defined as the back-end process that transforms bare integrated circuits (IC) into functional products. As the IC feature size decreases and the size of silicon wafer increases, the cost per IC is reduced and the performance is enhanced. The future IC chips will be larger in size, have more input/output terminals (I/Os), and require higher power. In addition to the advancements in IC technology, electronic packaging is also driven by the market requirements for low cost, small size, and multi-functional electronic products. In response to these requirements, packaging related areas such as design, packaging architectures, materials, processes, and manufacturing equipment are all changing rapidly. Wafer-level packaging (WLP) offers the benefits of low cost and smallest size for single chip packages, since the package is done at wafer level other than individual die. After packages reach the horizontal limit of dimensions, 3D stacking solution provides more efficient packages through expanding packages in the vertical dimension. Functional integration is achieved with 3D stacking architectures. System in package (SiP), one of the solutions to system integration, incorporates electronics, non-electronic devices such as optical devices, biological devices, micro-electro-mechanical systems (MEMS), etc, and interconnection in a single package, to form smart structures or microsystems. MEMS devices require specialized packaging to serve new market applications. This paper and presentation describe the technology requirements and challenges of these advancing packaging areas. The potential solutions and future trends are presented.

  17. Anti-quorum sensing activity of AgCl-TiO2 nanoparticles with potential use as active food packaging material.

    PubMed

    Naik, K; Kowshik, M

    2014-10-01

    To study the anti-quorum sensing (anti-QS) activity of AgCl-TiO2 nanoparticles (ATNPs) and its mechanism. Anti-QS activity of ATNPs was evaluated using the bacterial model Chromobacterium violaceum. Silver present in ATNPs significantly reduced violacein production in a concentration-dependent manner, indicating inhibition of QS. Anti-QS activity was confirmed by the absence of signalling molecule, oxo-octanoyl homoserine lactone during growth in the presence of ATNPs. TiO2 acted as a good supporting matrix facilitating controlled release of silver with prolonged residual activity. ATNPs are proposed as QS inhibitors with potential for use as an antipathogenic but nontoxic bioactive material. Although silver is well known for its bioactive potential of antibacterial, antifungal and antiviral properties, this study adds further note on its anti-QS activity and its potential use in food packaging industry. Food spoilage is a major socio-economic problem, and the potential role of QS in food spoilage and food safety has been indicated. Anti-QS materials such as ATNPs are proposed as efficient models for controlling food spoilage. ATNPs incorporated in food packaging materials could play an important role in food preservation and ensure safety of food by prolonging their shelf life. © 2014 The Society for Applied Microbiology.

  18. Performance-oriented packaging testing of PPP-B-601 ERAPS wood box for packing Group II solid hazardous material. Test report for Oct 91

    SciTech Connect

    Wu, E.

    1991-10-01

    Qualification tests were performed to determine whether the in-service PPP-B-601 ERAPS Wood Box could be utilized to contain properly dunnaged solid type hazardous materials weighing up to a gross weight of 237 kg (523 pounds). The tests were conducted in accordance with Performance Oriented Packaging (POP) requirements specified by the United Nations Recommendations on the Transportation of Dangerous Goods. The box has conformed to the POP performance requirements; i.e., the box successfully retained its contents throughout the stacking, vibration and drop tests.

  19. 49 CFR 173.203 - Non-bulk packagings for liquid hazardous materials in Packing Group III.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... Plastic drum: 1H1 or 1H2 Wooden barrel: 2C2 Steel jerrican: 3A1 or 3A2 Plastic jerrican: 3H1 or 3H2 Aluminum jerrican: 3B1 or 3B2 Steel box: 4A Aluminum box: 4B Natural wood box: 4C1 or 4C2 Plywood box: 4D Reconstituted wood box: 4F Fiberboard box: 4G Expanded plastic box: 4H1 Solid plastic box: 4H2 Inner packagings...

  20. 49 CFR 178.915 - General Large Packaging standards.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false General Large Packaging standards. 178.915 Section... PACKAGINGS Large Packagings Standards § 178.915 General Large Packaging standards. (a) Each Large Packaging.... Large Packagings intended for solid hazardous materials must be sift-proof and water-resistant. (b) All...

  1. How material, visual and verbal cues on packaging influence consumer expectations and willingness to buy: The case of crisps (potato chips) in Spain.

    PubMed

    Rebollar, Rubén; Gil, Ignacio; Lidón, Iván; Martín, Javier; Fernández, María J; Rivera, Sandra

    2017-09-01

    This paper analyses the influence that certain aspects of packaging design have on the consumer expectations of a series of sensory and non-sensory attributes and on willingness to buy for a bag of crisps in Spain. A two-part experiment was conducted in which 174 people evaluated the attributes for different stimuli using an online survey. In the first part, four stimuli were created in which two factors were varied: the packaging material and the image displayed. Interaction was identified between both factors for the attributes Crunchy, High quality and Artisan. For the attributes Salty, Crunchy and Willingness to buy, the image was the only significant factor, with the image displaying crisps ready for consumption being the only one that obtained higher scores. For the attribute Intense flavour, no statistically significant differences were identified among the stimuli. In general terms, the image displayed on the bag had a greater influence than the material from which the bag was made. In the second part, an analysis was made of the most effective way (visual cues versus verbal cues) to transmit the information that the crisps were fried in olive oil. To this end, two stimuli were designed: one displaying an image of an oil cruet and another with an allusive text. For all the attributes (Intense flavour, Crunchy, Artisan, High quality, Healthy and Willingness to buy), higher scores were obtained with the image than with the text. These results have important implications for crisps producers, marketers and packaging designers. Copyright © 2017 Elsevier Ltd. All rights reserved.

  2. Preliminary quantification of the permeability, solubility and diffusion coefficients of major aroma compounds present in herbs through various plastic packaging materials.

    PubMed

    Leelaphiwat, Pattarin; Auras, Rafael A; Burgess, Gary J; Harte, Janice B; Chonhenchob, Vanee

    2018-03-01

    Aroma permeation through packaging material is an important factor when designing a package for food products. The masses of aroma compounds permeating through films over time were measured at 25 °C using a quasi-isostatic system. A model was proposed for estimating the permeability coefficients (P) of key aroma compounds present in fresh herbs (i.e. eucalyptol, estragole, linalool and citral) through major plastic films used by the food industry [i.e. low-density polyethylene (LDPE), polypropylene (PP), nylon (Nylon), polyethylene terephthalate (PET), metalised-polyethylene terephthalate (MPET) and poly(lactic acid) (PLA)]. Solubility coefficients (S) were estimated from the amount of aroma compound sorbed in the films. Diffusion coefficients (D) were estimated following from the relation P = D*S. P and D for all four aroma compounds were highest in LDPE, except for eucalyptol, which P was slightly higher in PLA. The solubility coefficients and contact angles were highest in PLA suggesting the highest affinity of PLA to these aroma compounds. The theoretical solubility parameters were correlated with the solubility coefficients for estragole and citral, but not for eucalyptol and linalool. The preliminary P, D and S of eucalyptol, estragole, linalool and citral through LDPE, PP, Nylon, PET, MPET and PLA can be useful in selecting the proper packaging material for preserving these specific aroma compounds in food products and can potentially be used for estimating the shelf life of food products based on aroma loss. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

  3. 49 CFR 173.243 - Bulk packaging for certain high hazard liquids and dual hazard materials which pose a moderate...

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ..., 13L3, 13L4, 13M1 and 13M2; and (iv) Composite: 11HZ2 and 21HZ2. (e) A dual hazard material may be... dual hazard materials which pose a moderate hazard. 173.243 Section 173.243 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF...

  4. 49 CFR 173.243 - Bulk packaging for certain high hazard liquids and dual hazard materials which pose a moderate...

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ..., 13L3, 13L4, 13M1 and 13M2; and (iv) Composite: 11HZ2 and 21HZ2. (e) A dual hazard material may be... dual hazard materials which pose a moderate hazard. 173.243 Section 173.243 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF...

  5. 49 CFR 173.243 - Bulk packaging for certain high hazard liquids and dual hazard materials which pose a moderate...

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ..., 13L3, 13L4, 13M1 and 13M2; and (iv) Composite: 11HZ2 and 21HZ2. (e) A dual hazard material may be... dual hazard materials which pose a moderate hazard. 173.243 Section 173.243 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF...

  6. Radioactive waste disposal package

    DOEpatents

    Lampe, Robert F.

    1986-01-01

    A radioactive waste disposal package comprising a canister for containing vitrified radioactive waste material and a sealed outer shell encapsulating the canister. A solid block of filler material is supported in said shell and convertible into a liquid state for flow into the space between the canister and outer shell and subsequently hardened to form a solid, impervious layer occupying such space.

  7. Radioactive waste disposal package

    DOEpatents

    Lampe, Robert F.

    1986-11-04

    A radioactive waste disposal package comprising a canister for containing vitrified radioactive waste material and a sealed outer shell encapsulating the canister. A solid block of filler material is supported in said shell and convertible into a liquid state for flow into the space between the canister and outer shell and subsequently hardened to form a solid, impervious layer occupying such space.

  8. 49 CFR 176.156 - Defective packages.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Defective packages. 176.156 Section 176.156... packages. (a) No leaking, broken, or otherwise defective package containing Class 1 (explosive) materials, including packages which have been adversely affected by moisture, may be accepted for shipment. The master...

  9. 49 CFR 176.156 - Defective packages.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 2 2011-10-01 2011-10-01 false Defective packages. 176.156 Section 176.156... packages. (a) No leaking, broken, or otherwise defective package containing Class 1 (explosive) materials, including packages which have been adversely affected by moisture, may be accepted for shipment. The master...

  10. 49 CFR 173.29 - Empty packagings.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Empty packagings. 173.29 Section 173.29... SHIPMENTS AND PACKAGINGS Preparation of Hazardous Materials for Transportation § 173.29 Empty packagings. (a) General. Except as otherwise provided in this section, an empty packaging containing only the residue of a...

  11. Biogenic synthesis of Zinc oxide nanostructures from Nigella sativa seed: Prospective role as food packaging material inhibiting broad-spectrum quorum sensing and biofilm

    PubMed Central

    Al-Shabib, Nasser A.; Husain, Fohad Mabood; Ahmed, Faheem; Khan, Rais Ahmad; Ahmad, Iqbal; Alsharaeh, Edreese; Khan, Mohd Shahnawaz; Hussain, Afzal; Rehman, Md Tabish; Yusuf, Mohammad; Hassan, Iftekhar; Khan, Javed Masood; Ashraf, Ghulam Md; Alsalme, Ali Mohammed; Al-Ajmi, Mohamed F.; Tarasov, Vadim V.; Aliev, Gjumrakch

    2016-01-01

    Bacterial spoilage of food products is regulated by density dependent communication system called quorum sensing (QS). QS control biofilm formation in numerous food pathogens and Biofilms formed on food surfaces act as carriers of bacterial contamination leading to spoilage of food and health hazards. Agents inhibiting or interfering with bacterial QS and biofilm are gaining importance as a novel class of next-generation food preservatives/packaging material. In the present study, Zinc nanostructures were synthesised using Nigella sativa seed extract (NS-ZnNPs). Synthesized nanostructures were characterized hexagonal wurtzite structure of size ~24 nm by UV-visible, XRD, FTIR and TEM. NS-ZnNPs demonstrated broad-spectrum QS inhibition in C. violaceum and P. aeruginosa biosensor strains. Synthesized nanostructures inhibited QS regulated functions of C. violaceum CVO26 (violacein) and elastase, protease, pyocyanin and alginate production in PAO1 significantly. NS-ZnNPs at sub-inhibitory concentrations inhibited the biofilm formation of four-food pathogens viz. C. violaceum 12472, PAO1, L. monocytogenes, E. coli. Moreover, NS-ZnNPs was found effective in inhibiting pre-formed mature biofilms of the four pathogens. Therefore, the broad-spectrum inhibition of QS and biofilm by biogenic Zinc oxide nanoparticles and it is envisaged that these nontoxic bioactive nanostructures can be used as food packaging material and/or as food preservative. PMID:27917856

  12. Oral Hygiene. Learning Activity Package.

    ERIC Educational Resources Information Center

    Hime, Kirsten

    This learning activity package on oral hygiene is one of a series of 12 titles developed for use in health occupations education programs. Materials in the package include objectives, a list of materials needed, a list of definitions, information sheets, reviews (self evaluations) of portions of the content, and answers to reviews. These topics…

  13. Sensory impacts of food-packaging interactions.

    PubMed

    Duncan, Susan E; Webster, Janet B

    2009-01-01

    Sensory changes in food products result from intentional or unintentional interactions with packaging materials and from failure of materials to protect product integrity or quality. Resolving sensory issues related to plastic food packaging involves knowledge provided by sensory scientists, materials scientists, packaging manufacturers, food processors, and consumers. Effective communication among scientists and engineers from different disciplines and industries can help scientists understand package-product interactions. Very limited published literature describes sensory perceptions associated with food-package interactions. This article discusses sensory impacts, with emphasis on oxidation reactions, associated with the interaction of food and materials, including taints, scalping, changes in food quality as a function of packaging, and examples of material innovations for smart packaging that can improve sensory quality of foods and beverages. Sensory evaluation is an important tool for improved package selection and development of new materials.

  14. A study of the compatibility of an existing CFD package with a broader class of material constitutions

    NASA Technical Reports Server (NTRS)

    French, K. W., Jr.

    1985-01-01

    The flexibility of the PHOENICS computational fluid dynamics package was assessed along two general avenues; parallel modeling and analog modeling. In parallel modeling the dependent and independent variables retain their identity within some scaling factors, even though the boundary conditions and especially the constitutive relations do not correspond to any realistic fluid dynamic situation. PHOENICS was used to generate a CFD model that should exhibit the physical anomalies of a granular medium and permit reasonable similarity with boundary conditions typical to membrane or porous piston loading. A considerable portion of the study was spent prying into the existing code with a prejudice toward rate type and disarming any inherent fluid behavior. The final stages of the study were directed at the more specific problem of multiaxis loading of cylindrical geometry with a concern for the appearance of bulging, cross slab shear failure modes.

  15. 49 CFR 173.243 - Bulk packaging for certain high hazard liquids and dual hazard materials which pose a moderate...

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... dual hazard materials which pose a moderate hazard. 173.243 Section 173.243 Transportation Other... hazard liquids and dual hazard materials which pose a moderate hazard. When § 172.101 of this subchapter..., 13L3, 13L4, 13M1 and 13M2; and (iv) Composite: 11HZ2 and 21HZ2. (e) A dual hazard material may be...

  16. Automated Solid Phase Extraction (SPE) LC/NMR Applied to the Structural Analysis of Extractable Compounds from a Pharmaceutical Packaging Material of Construction.

    PubMed

    Norwood, Daniel L; Mullis, James O; Davis, Mark; Pennino, Scott; Egert, Thomas; Gonnella, Nina C

    2013-01-01

    The structural analysis (i.e., identification) of organic chemical entities leached into drug product formulations has traditionally been accomplished with techniques involving the combination of chromatography with mass spectrometry. These include gas chromatography/mass spectrometry (GC/MS) for volatile and semi-volatile compounds, and various forms of liquid chromatography/mass spectrometry (LC/MS or HPLC/MS) for semi-volatile and relatively non-volatile compounds. GC/MS and LC/MS techniques are complementary for structural analysis of leachables and potentially leachable organic compounds produced via laboratory extraction of pharmaceutical container closure/delivery system components and corresponding materials of construction. Both hyphenated analytical techniques possess the separating capability, compound specific detection attributes, and sensitivity required to effectively analyze complex mixtures of trace level organic compounds. However, hyphenated techniques based on mass spectrometry are limited by the inability to determine complete bond connectivity, the inability to distinguish between many types of structural isomers, and the inability to unambiguously determine aromatic substitution patterns. Nuclear magnetic resonance spectroscopy (NMR) does not have these limitations; hence it can serve as a complement to mass spectrometry. However, NMR technology is inherently insensitive and its ability to interface with chromatography has been historically challenging. This article describes the application of NMR coupled with liquid chromatography and automated solid phase extraction (SPE-LC/NMR) to the structural analysis of extractable organic compounds from a pharmaceutical packaging material of construction. The SPE-LC/NMR technology combined with micro-cryoprobe technology afforded the sensitivity and sample mass required for full structure elucidation. Optimization of the SPE-LC/NMR analytical method was achieved using a series of model compounds

  17. Environmentally friendly method for the determination of acrylamide and trimethylolpropane in paper packaging materials by liquid chromatography with tandem mass spectrometry.

    PubMed

    Yang, Fei; Li, Zhonghao; Bian, Zhaoyang; Tang, Gangling; Fan, Ziyan; Wang, Ying; Liu, ShanShan; Zhang, Hongfei

    2014-12-01

    A simple, rapid, and environmentally friendly method was developed for the determination of acrylamide and trimethylolpropane in paper packaging materials. No organic solvent was used and the matrix effect was investigated. The extract was directly analyzed by liquid chromatography with tandem mass chromatography for quantification and confirmation. The chromatographic separations were performed on a ZORBAX HILIC Plus (2.1 mm × 150 mm, 3μm; Agilent, USA) column with only one mobile phase (100% water). Calibration curves for acrylamide and trimethylopropane were achieved with concentrations ranging from 0.4 to 20 mg/kg and the corresponding r(2) values were 0.998 and 0.999, respectively. The recoveries were >85% with relative standard deviations <10%. The validated method was applied to the analysis of 50 real samples, and positive results were obtained for 30 samples. The result indicated that trimethylolpropane is associated with inks and printing activity and acrylamide is widely used as a papermaking additive in many paper packages. The concentrations of acrylamide and trimethylolpropane ranged from 0.41 to 7.5 and 0.50 to 8.8 mg/kg, respectively. The results of this study revealed that this method could be used accurately and precisely. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  18. Deciphering the potential of guar gum/Ag-Cu nanocomposite films as an active food packaging material.

    PubMed

    Arfat, Yasir Ali; Ejaz, Mohammed; Jacob, Harsha; Ahmed, Jasim

    2017-02-10

    Guar gum (GG) based nanocomposite (NC) films were prepared by incorporating silver-copper alloy nanoparticles (Ag-Cu NPs) through solution casting method. Effect of NP loadings (0.5-2%) on the thermo-mechanical, optical, spectral, oxygen barrier and antimicrobial properties of the GG/Ag-Cu NC films were investigated. Tensile testing showed an improvement in the mechanical strength, and a decrease in elongation at break for all NP loadings. NP incorporation into GG films showed a marked influence on the color values. The NC films showed excellent UV, light and oxygen barrier capability. Thermal properties of the NC films were improved as evidenced from the differential scanning calorimetry and the thermal conductivity data. NC films became rough and coarse over neat GG film as visualized through the scanning electron microscopy. A strong antibacterial activity was exhibited by NC films against both Gram-positive and Gram-negative bacteria, and therefore, the film could be considered as an active food packaging. Copyright © 2016 Elsevier Ltd. All rights reserved.

  19. Food packaging: a consideration for procurement.

    PubMed

    Clausen, S; Barclay, M J; Wolf-Novak, L C

    1986-03-01

    Food packaging information can benefit those involved with procurement of food products; however, available information is limited. A mail survey of 271 hospital administrative dietitians and 29 foodservice directors was conducted to investigate their perceptions and knowledge of food packaging functions, packaging information, and packaging materials and forms. Data from the 60 usable mail surveys indicate most participants perceived food packaging information as being beneficial for making purchasing decisions and that packaging has several important functions. However, participants appeared to possess limited knowledge about packaging materials and forms. Respondents were most knowledgeable about traditional packaging forms and materials vs. those developed more recently. Food packaging information should be made available to administrative foodservice personnel through publications and seminars or conferences.

  20. 49 CFR 173.411 - Industrial packages.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS REGULATIONS SHIPPERS-GENERAL REQUIREMENTS FOR SHIPMENTS AND PACKAGINGS Class 7 (Radioactive) Materials § 173.411 Industrial packages. (a) General. Each...) Each Type IP-1 package must meet the general design requirements prescribed in § 173.410. (2) Each Type...

  1. High-Pressure Transducer Package

    NASA Technical Reports Server (NTRS)

    Wamstad, D.; Glenn, M.

    1987-01-01

    Enclosure for silicon device ensures accurate measurements of cryogenic liquids. Package holds silicon sensor in uniform compression around periphery and helps ensure accurate, stable, and repeatable pressure measurements. Mounting assembly housed in package of stainless steel. Materials selected for equality of thermal expansion and for pressure-sealing properties. Besides its high-pressure, low-temperature characteristics, package withstands vibrations as severe as 400 times standard gravitational acceleration at 0 to 2,000 Hz.

  2. Volatile compounds in Spanish dry-fermented sausage 'salchichón' subjected to high pressure processing. Effect of the packaging material.

    PubMed

    Rivas-Cañedo, Ana; Nuñez, Manuel; Fernández-García, Estrella

    2009-12-01

    The effect of high pressure treatment (400MPa, 10min at 12°C) on the volatile profile of Spanish dry-fermented sausage 'salchichón', packaged with or without aluminium foil in a multilayer polymeric bag, was investigated. The analysis of the volatile fraction was carried out by dynamic headspace extraction coupled to gas chromatography-mass spectrometry. Pressure-treated samples showed significantly higher levels of alcohols, aldehydes and alkanes and lower levels of two methylketones as compared with control samples. An intense migration was observed of compounds from the plastic material into the product, mainly linear and branched-chain alkanes, alkenes and benzene compounds. Most of these migrating compounds were significantly more abundant in pressurized samples than in untreated samples.

  3. Magnetic covalent triazine framework for rapid extraction of phthalate esters in plastic packaging materials followed by gas chromatography-flame ionization detection.

    PubMed

    Yan, Zijun; He, Man; Chen, Beibei; Gui, Bo; Wang, Cheng; Hu, Bin

    2017-11-24

    Covalent triazine frameworks (CTFs), featuring with high surface area, good thermal, chemical and mechanical stability, are good adsorbents in sample pretreatment. Herein, magnetic CTFs/Ni composite was prepared by in situ reduction of nickel ions on CTFs matrix with a solvothermal method. The prepared CTFs/Ni composite exhibited good preparation reproducibility, high chemical stability, and high extraction efficiency for targeted phthalate esters (PAEs) due to π-π interaction and hydrophobic effect. The porous structure of CTFs/Ni composite benefited the fast transfer of target PAEs from aqueous solution to the adsorbents, and the integrated magnetism contributed to the rapid separation of adsorbents from sample and elution solution. Based on it, a novel method of magnetic solid phase extraction (MSPE) combined with gas chromatography-flame ionization detector (GC-FID) was developed for the analysis of PAEs including dimethyl phthalate (DMP), diethyl phthalate (DEP), di-n-butyl phthalate (DBP), benzyl butyl phthalate (BBP), di-2-ethylhexl phthalate (DEHP), and di-n-octyl phthalate (DNOP) in plastic packaging materials. Under the optimal experimental conditions, the limits of detection (LODs, S/N=3) for six PAEs were found to be in the range of 0.024-0.085mg/kg. The linear range was 0.32-16mg/kg for DMP, DEP, 0.08-80mg/kg for DBP, 0.16-32mg/kg for BBP, DEHP, and 0.32-32mg/kg for DNOP, respectively. The enrichment factors ranged from 59 to 88-fold (theoretical enrichment factor was 133-fold). The proposed method was successfully applied to the analysis of PAEs in various plastic packaging materials with recoveries in the range of 70.6-119% for the spiked samples. This method is characterized with short operation time, high sensitivity, low consumption of harmful organic solvents and can be extended to the analysis of other trace aromatic compounds. Copyright © 2017 Elsevier B.V. All rights reserved.

  4. BerkeleyGW: A massively parallel computer package for the calculation of the quasiparticle and optical properties of materials and nanostructures

    NASA Astrophysics Data System (ADS)

    Deslippe, Jack; Samsonidze, Georgy; Strubbe, David A.; Jain, Manish; Cohen, Marvin L.; Louie, Steven G.

    2012-06-01

    BerkeleyGW is a massively parallel computational package for electron excited-state properties that is based on the many-body perturbation theory employing the ab initio GW and GW plus Bethe-Salpeter equation methodology. It can be used in conjunction with many density-functional theory codes for ground-state properties, including PARATEC, PARSEC, Quantum ESPRESSO, SIESTA, and Octopus. The package can be used to compute the electronic and optical properties of a wide variety of material systems from bulk semiconductors and metals to nanostructured materials and molecules. The package scales to 10 000s of CPUs and can be used to study systems containing up to 100s of atoms. Program summaryProgram title: BerkeleyGW Catalogue identifier: AELG_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AELG_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Open source BSD License. See code for licensing details. No. of lines in distributed program, including test data, etc.: 576 540 No. of bytes in distributed program, including test data, etc.: 110 608 809 Distribution format: tar.gz Programming language: Fortran 90, C, C++, Python, Perl, BASH Computer: Linux/UNIX workstations or clusters Operating system: Tested on a variety of Linux distributions in parallel and serial as well as AIX and Mac OSX RAM: (50-2000) MB per CPU (Highly dependent on system size) Classification: 7.2, 7.3, 16.2, 18 External routines: BLAS, LAPACK, FFTW, ScaLAPACK (optional), MPI (optional). All available under open-source licenses. Nature of problem: The excited state properties of materials involve the addition or subtraction of electrons as well as the optical excitations of electron-hole pairs. The excited particles interact strongly with other electrons in a material system. This interaction affects the electronic energies, wavefunctions and lifetimes. It is well known that ground-state theories, such as standard methods

  5. PENGEOM-A general-purpose geometry package for Monte Carlo simulation of radiation transport in material systems defined by quadric surfaces

    NASA Astrophysics Data System (ADS)

    Almansa, Julio; Salvat-Pujol, Francesc; Díaz-Londoño, Gloria; Carnicer, Artur; Lallena, Antonio M.; Salvat, Francesc

    2016-02-01

    The Fortran subroutine package PENGEOM provides a complete set of tools to handle quadric geometries in Monte Carlo simulations of radiation transport. The material structure where radiation propagates is assumed to consist of homogeneous bodies limited by quadric surfaces. The PENGEOM subroutines (a subset of the PENELOPE code) track particles through the material structure, independently of the details of the physics models adopted to describe the interactions. Although these subroutines are designed for detailed simulations of photon and electron transport, where all individual interactions are simulated sequentially, they can also be used in mixed (class II) schemes for simulating the transport of high-energy charged particles, where the effect of soft interactions is described by the random-hinge method. The definition of the geometry and the details of the tracking algorithm are tailored to optimize simulation speed. The use of fuzzy quadric surfaces minimizes the impact of round-off errors. The provided software includes a Java graphical user interface for editing and debugging the geometry definition file and for visualizing the material structure. Images of the structure are generated by using the tracking subroutines and, hence, they describe the geometry actually passed to the simulation code.

  6. A new headspace gas chromatographic method for the determination of methanol content in paper materials used for food and drink packaging.

    PubMed

    Hu, Hui-Chao; Tian, Ying-Xin; Jin, Hui-Jun; Chai, Xin-Sheng; Barnes, Donald G

    2013-10-02

    This study reports on a method for determination of methanol in paper products by headspace gas chromatography (HS-GC). The method is based on the hydrolysis of the pulp or paper matrix, using a phosphoric acid solution (42.5%) as the medium at 120 °C in 5 h (excluding air contact) in order to release matrix-entrapped methanol, which is then determined by HS-GC. Data show that, under the given conditions of hydrolysis, no methanol was formed from the methoxyl groups in the material. Reproducibility tests of the method generated a relative standard deviation of <3.5%, with recovery in the range of 93.4-102%. The present method is reliable, accurate, and suitable for use in batch testing of the methanol content in paper-related materials. The method can play an important role in addressing food safety concerns that may be raised regarding the use of paper materials in food and beverage packaging.

  7. Estimation of exposure to food packaging materials. 3: Development of consumption factors and food-type distribution factors from data collected on Irish children.

    PubMed

    Duffy, E; Hearty, A P; McCarthy, S; Gibney, M J

    2007-01-01

    There are many initiatives in Europe trying to refine the exposure assessment for food packaging migrants. In the USA, the US Food and Drug Administration (US FDA) uses food consumption and food-type distribution factors to aid the exposure assessment process and generate more realistic estimates of exposure. The present study developed food-consumption factors and food-type distribution factors for Irish children aged 5-12 years from data collected as part of a National Children's Food Survey (NCFS) completed in Ireland in 2003-04, combined with data from the 2003-05 Irish Food Packaging Database and from literature data on surface area-to-weight ratios for food packaging. Consumption factors are defined as the fraction of a person's diet likely to contact a specific food-contact material, while food-type distribution factors reflect the fraction of all food contacting each material that is aqueous, acidic, alcoholic or fatty. In this study, it was found that 'total plastics' had the highest consumption factor of 0.83, while 'total paper and board' had a factor of 0.13 and 'total metal and alloys' had a factor of 0.06. Although it is tentative to compare the US FDA factors with the factors derived in the current study, as the US FDA data are for the total US population, the consumption factor for 'total plastics' in the present study (0.83) was similar to that used by the US FDA (0.79). However, a large difference existed for the consumption factor for 'total metal and alloys' in the Irish data (0.06) and the US FDA data (0.2). In terms of the type of materials used for foods, glass was used mainly for acidic foods (0.67), while plastic was uniformly used for all food types. The food-contact area for plastic packaging for all foods consumed by children was 10.67 dm2/child day(-1), which is slightly lower than the proposed value for the average European consumer of 12.4 dm2/person day(-1). However, this should be expected, as children do not consume as much food as

  8. Waste disposal package

    DOEpatents

    Smith, M.J.

    1985-06-19

    This is a claim for a waste disposal package including an inner or primary canister for containing hazardous and/or radioactive wastes. The primary canister is encapsulated by an outer or secondary barrier formed of a porous ceramic material to control ingress of water to the canister and the release rate of wastes upon breach on the canister. 4 figs.

  9. Solar water heater design package

    NASA Technical Reports Server (NTRS)

    1981-01-01

    Package describes commercial domestic-hot-water heater with roof or rack mounted solar collectors. System is adjustable to pre-existing gas or electric hot-water house units. Design package includes drawings, description of automatic control logic, evaluation measurements, possible design variations, list of materials and installation tools, and trouble-shooting guide and manual.

  10. 49 CFR 173.3 - Packaging and exceptions.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 2 2011-10-01 2011-10-01 false Packaging and exceptions. 173.3 Section 173.3... SHIPMENTS AND PACKAGINGS General § 173.3 Packaging and exceptions. (a) The packaging of hazardous materials.... standard packaging must be open to inspection by a representative of the Department. (b) The regulations...

  11. 49 CFR 173.3 - Packaging and exceptions.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 2 2012-10-01 2012-10-01 false Packaging and exceptions. 173.3 Section 173.3... SHIPMENTS AND PACKAGINGS General § 173.3 Packaging and exceptions. (a) The packaging of hazardous materials.... standard packaging must be open to inspection by a representative of the Department. (b) The regulations...

  12. 49 CFR 173.3 - Packaging and exceptions.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 2 2013-10-01 2013-10-01 false Packaging and exceptions. 173.3 Section 173.3... SHIPMENTS AND PACKAGINGS General § 173.3 Packaging and exceptions. (a) The packaging of hazardous materials.... standard packaging must be open to inspection by a representative of the Department. (b) The regulations...

  13. 10 CFR 71.19 - Previously approved package.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 2 2011-01-01 2011-01-01 false Previously approved package. 71.19 Section 71.19 Energy... Licenses § 71.19 Previously approved package. (a) [Reserved] (b) A Type B(U) package, a Type B(M) package, or a fissile material package, previously approved by the NRC but without the designation “-85” in...

  14. 10 CFR 71.19 - Previously approved package.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Previously approved package. 71.19 Section 71.19 Energy... Licenses § 71.19 Previously approved package. (a) [Reserved] (b) A Type B(U) package, a Type B(M) package, or a fissile material package, previously approved by the NRC but without the designation “-85” in...

  15. 7 CFR 58.151 - Packaging and repackaging.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... Identification § 58.151 Packaging and repackaging. (a) Packaging dairy products or cutting and repackaging all... packaging rooms, the equipment and packaging materials shall be practically free from mold and bacterial... other official identification, a supervisor of packaging shall be required, see subpart A of this part...

  16. 7 CFR 58.151 - Packaging and repackaging.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... Identification § 58.151 Packaging and repackaging. (a) Packaging dairy products or cutting and repackaging all... packaging rooms, the equipment and packaging materials shall be practically free from mold and bacterial... other official identification, a supervisor of packaging shall be required, see subpart A of this part...

  17. 7 CFR 58.151 - Packaging and repackaging.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... Identification § 58.151 Packaging and repackaging. (a) Packaging dairy products or cutting and repackaging all... packaging rooms, the equipment and packaging materials shall be practically free from mold and bacterial... other official identification, a supervisor of packaging shall be required, see subpart A of this part...

  18. 7 CFR 58.151 - Packaging and repackaging.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Identification § 58.151 Packaging and repackaging. (a) Packaging dairy products or cutting and repackaging all... packaging rooms, the equipment and packaging materials shall be practically free from mold and bacterial... other official identification, a supervisor of packaging shall be required, see subpart A of this part...

  19. 7 CFR 58.151 - Packaging and repackaging.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... Identification § 58.151 Packaging and repackaging. (a) Packaging dairy products or cutting and repackaging all... packaging rooms, the equipment and packaging materials shall be practically free from mold and bacterial... other official identification, a supervisor of packaging shall be required, see subpart A of this part...

  20. Space station power semiconductor package

    NASA Technical Reports Server (NTRS)

    Balodis, Vilnis; Berman, Albert; Devance, Darrell; Ludlow, Gerry; Wagner, Lee

    1987-01-01

    A package of high-power switching semiconductors for the space station have been designed and fabricated. The package includes a high-voltage (600 volts) high current (50 amps) NPN Fast Switching Power Transistor and a high-voltage (1200 volts), high-current (50 amps) Fast Recovery Diode. The package features an isolated collector for the transistors and an isolated anode for the diode. Beryllia is used as the isolation material resulting in a thermal resistance for both devices of .2 degrees per watt. Additional features include a hermetical seal for long life -- greater than 10 years in a space environment. Also, the package design resulted in a low electrical energy loss with the reduction of eddy currents, stray inductances, circuit inductance, and capacitance. The required package design and device parameters have been achieved. Test results for the transistor and diode utilizing the space station package is given.

  1. Safety evaluation for packaging (onsite) concrete-lined waste packaging

    SciTech Connect

    Romano, T.

    1997-09-25

    The Pacific Northwest National Laboratory developed a package to ship Type A, non-transuranic, fissile excepted quantities of liquid or solid radioactive material and radioactive mixed waste to the Central Waste Complex for storage on the Hanford Site.

  2. 77 FR 18871 - Administrative Guide for Verifying Compliance With Packaging Requirements for Shipment and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-28

    ... Packaging Requirements for Shipment and Receipt of Radioactive Material AGENCY: Nuclear Regulatory... with Packaging Requirements for Shipment and Receipt of Radioactive Material.'' This regulatory guide... for transporting licensed material under 10 CFR part 71, ``Packaging and Transportation of Radioactive...

  3. Atmospheric pressure gas chromatography coupled to quadrupole-time of flight mass spectrometry as a powerful tool for identification of non intentionally added substances in acrylic adhesives used in food packaging materials.

    PubMed

    Canellas, E; Vera, P; Domeño, C; Alfaro, P; Nerín, C

    2012-04-27

    Acrylic adhesives are used to manufacture multilayer laminates that are used in food packaging to form the geometric shape of the package as well as to stick labels on the packages. Once applied on the packaging adhesives can supply potential migrants that could endanger the packaged food. Adhesives are complex matrices where intentionally and non intentionally added substances are present, but the identification of the migrants is required by law. In this study atmospheric pressure gas chromatography coupled to a quadrupole hyphenated to a time of flight mass spectrometer (APGC-MS/Q-TOF) has been explored for identification of unknowns coming from three different acrylic adhesives. The results are compared to those obtained by conventional GC-MS-Q (quadrupole). Sixteen compounds were identified by GC-MS/Q and five of them were confirmed by APGC-MS/Q-TOF as their molecular ions were found. Moreover, additional three new compounds were identified and their structure was elucidated working with the spectra obtained by APGC-MS/Q-TOF. This finding was very relevant as these compounds were biocides suspected to be allergenic and cytotoxic in humans. Migration studies were carried out using Tenax as solid food simulant and the results showed that the three acrylic adhesives tested in this work were safe for being used in food packaging materials since the migration of compounds previously identified was below the limit established in the current legislation. Copyright © 2012 Elsevier B.V. All rights reserved.

  4. Simulation Packages

    NASA Astrophysics Data System (ADS)

    Britz, Dieter

    Not every electrochemist wishes to write his or her own simulation programs, and there are a number of ready-made programs that can be obtained through the Internet or otherwise, some commercial, some free, and some that are online programs. These can be convenient but all have some limitations of various kinds. There have been several reviews describing these packages [104, 114, 523].

  5. 49 CFR 173.24 - General requirements for packagings and packages.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... significant chemical or galvanic reaction between the materials and contents of the package. (3) Plastic... this part (“Procedure for Testing Chemical Compatibility and Rate of Permeation in Plastic Packagings... plastic packaging or receptacle used for Packing Group I materials. The maximum rate of permeation of...

  6. 49 CFR 173.25 - Authorized packagings and overpacks.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 2 2014-10-01 2014-10-01 false Authorized packagings and overpacks. 173.25...-GENERAL REQUIREMENTS FOR SHIPMENTS AND PACKAGINGS Preparation of Hazardous Materials for Transportation § 173.25 Authorized packagings and overpacks. (a) Authorized packages containing hazardous materials may...

  7. 49 CFR 173.25 - Authorized packagings and overpacks.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 2 2012-10-01 2012-10-01 false Authorized packagings and overpacks. 173.25...-GENERAL REQUIREMENTS FOR SHIPMENTS AND PACKAGINGS Preparation of Hazardous Materials for Transportation § 173.25 Authorized packagings and overpacks. (a) Authorized packages containing hazardous materials may...

  8. 49 CFR 173.25 - Authorized packagings and overpacks.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 2 2013-10-01 2013-10-01 false Authorized packagings and overpacks. 173.25...-GENERAL REQUIREMENTS FOR SHIPMENTS AND PACKAGINGS Preparation of Hazardous Materials for Transportation § 173.25 Authorized packagings and overpacks. (a) Authorized packages containing hazardous materials may...

  9. 49 CFR 173.25 - Authorized packagings and overpacks.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 2 2011-10-01 2011-10-01 false Authorized packagings and overpacks. 173.25...-GENERAL REQUIREMENTS FOR SHIPMENTS AND PACKAGINGS Preparation of Hazardous Materials for Transportation § 173.25 Authorized packagings and overpacks. (a) Authorized packages containing hazardous materials may...

  10. 49 CFR 173.25 - Authorized packagings and overpacks.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Authorized packagings and overpacks. 173.25...-GENERAL REQUIREMENTS FOR SHIPMENTS AND PACKAGINGS Preparation of Hazardous Materials for Transportation § 173.25 Authorized packagings and overpacks. (a) Authorized packages containing hazardous materials may...

  11. 49 CFR 172.514 - Bulk packagings.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Bulk packagings. 172.514 Section 172.514... SECURITY PLANS Placarding § 172.514 Bulk packagings. (a) Except as provided in paragraph (c) of this section, each person who offers for transportation a bulk packaging which contains a hazardous material...

  12. 49 CFR 130.21 - Packaging requirements.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Packaging requirements. 130.21 Section 130.21 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY... Packaging requirements. Each packaging used for the transportation of oil subject to this part must be...

  13. ICT and the paperboard and packaging industry

    Treesearch

    Peter Ince; Sanna Kallioranta; Richard Vlosky

    2005-01-01

    The purpose of this chapter is to describe the reasons for the development of ICT and e-business systems in the paper and paperboard packaging industry and to discuss future scenarios that may serve to guide forest- sector research in this topical area. The paper and paperboard packaging industry encompasses producers of primary paper and paperboard packaging materials...

  14. Packaged Food

    NASA Technical Reports Server (NTRS)

    1976-01-01

    After studies found that many elderly persons don't eat adequately because they can't afford to, they have limited mobility, or they just don't bother, Innovated Foods, Inc. and JSC developed shelf-stable foods processed and packaged for home preparation with minimum effort. Various food-processing techniques and delivery systems are under study and freeze dried foods originally used for space flight are being marketed. (See 77N76140)

  15. Identification of wood-boring beetles (Cerambycidae and Buprestidae) intercepted in trade-associated solid wood packaging material using DNA barcoding and morphology

    PubMed Central

    Wu, Yunke; Trepanowski, Nevada F.; Molongoski, John J.; Reagel, Peter F.; Lingafelter, Steven W.; Nadel, Hannah; Myers, Scott W.; Ray, Ann M.

    2017-01-01

    Global trade facilitates the inadvertent movement of insect pests and subsequent establishment of populations outside their native ranges. Despite phytosanitary measures, nonnative insects arrive at United States (U.S.) ports of entry as larvae in solid wood packaging material (SWPM). Identification of wood-boring larval insects is important for pest risk analysis and management, but is difficult beyond family level due to highly conserved morphology. Therefore, we integrated DNA barcoding and rearing of larvae to identify wood-boring insects in SWPM. From 2012 to 2015, we obtained larvae of 338 longhorned beetles (Cerambycidae) and 38 metallic wood boring beetles (Buprestidae) intercepted in SWPM associated with imported products at six U.S. ports. We identified 265 specimens to species or genus using DNA barcodes. Ninety-three larvae were reared to adults and identified morphologically. No conflict was found between the two approaches, which together identified 275 cerambycids (23 genera) and 16 buprestids (4 genera). Our integrated approach confirmed novel DNA barcodes for seven species (10 specimens) of woodborers not in public databases. This study demonstrates the utility of DNA barcoding as a tool for regulatory agencies. We provide important documentation of potential beetle pests that may cross country borders through the SWPM pathway. PMID:28091577

  16. Analytical tools for identification of non-intentionally added substances (NIAS) coming from polyurethane adhesives in multilayer packaging materials and their migration into food simulants.

    PubMed

    Félix, Juliana S; Isella, Francesca; Bosetti, Osvaldo; Nerín, Cristina

    2012-07-01

    Adhesives used in food packaging to glue different materials can provide several substances as potential migrants, and the identification of potential migrants and migration tests are required to assess safety in the use of adhesives. Solid-phase microextraction in headspace mode and gas chromatography coupled to mass spectrometry (HS-SPME-GC-MS) and ChemSpider and SciFinder databases were used as powerful tools to identify the potential migrants in the polyurethane (PU) adhesives and also in the individual plastic films (polyethylene terephthalate, polyamide, polypropylene, polyethylene, and polyethylene/ethyl vinyl alcohol). Migration tests were carried out by using Tenax(®) and isooctane as food simulants, and the migrants were analyzed by gas chromatography coupled to mass spectrometry. More than 63 volatile and semivolatile compounds considered as potential migrants were detected either in the adhesives or in the films. Migration tests showed two non-intentionally added substances (NIAS) coming from PU adhesives that migrated through the laminates into Tenax(®) and into isooctane. Identification of these NIAS was achieved through their mass spectra, and 1,6-dioxacyclododecane-7,12-dione and 1,4,7-trioxacyclotridecane-8,13-dione were confirmed. Caprolactam migrated into isooctane, and its origin was the external plastic film in the multilayer, demonstrating real diffusion through the multilayer structure. Comparison of the migration values between the simulants and conditions will be shown and discussed.

  17. The properties of chitosan and gelatin films incorporated with ethanolic red grape seed extract and Ziziphora clinopodioides essential oil as biodegradable materials for active food packaging.

    PubMed

    Shahbazi, Yasser

    2017-06-01

    The aim of this study was to improve different characteristics including antibacterial, antioxidant, physical and mechanical properties of chitosan (Ch) and gelatin (Ge) films by incorporating Ziziphora clinopodioides essential oil (ZEO; 0 and 1% v/w) and ethanolic grape seed extract (GSE; 0 and 1% v/w). The main compounds of the ZEO were carvacrol (65.22%) and thymol (19.51%). According to our findings, addition of aforementioned materials could improve total phenolic content, antibacterial and antioxidant activities, thickness and also water vapor barrier property. ZEO and GSE reduces swelling index, tensile strength, puncture force and puncture deformation of Ch and Ge films. Pure Ch and Ge films had slightly yellow and white appearances, respectively, while films incorporated with GSE in combination with ZEO had grey appearances. This study indicated the some benefits of addition of ZEO and GSE into Ch and Ge films and their potentials for application as biodegradable active packaging. Copyright © 2017 Elsevier B.V. All rights reserved.

  18. Nutritional value of cold-pressed rapeseed oil during long term storage as influenced by the type of packaging material, exposure to light & oxygen and storage temperature.

    PubMed

    Wroniak, Małgorzata; Rękas, Agnieszka

    2016-02-01

    The effect of various conditions (storage temperature, exposure to light, access of oxygen) and different packaging material (amber glass, amber polyethylene terephthalate) on the nutritional value of cold-pressed rapeseed oil during 12 months of storage was investigated. Quantified quality parameters included: acidity, peroxide value, spectrophotometric indices (K 232 , K 268 ), fatty acid composition, tocopherols and sterols. Storage of oil at 4 °C was found to be most appropriate for maintaining the quality of cold-pressed rapeseed oil. Exposure of oil samples stored at room temperature to light in combination with the access of oxygen caused the most pronounced losses in the total tocopherols (ca. 90-91 % of α-T, and ca. 80-81 % of γ-T), total phytosterols (ca. 15-16 %) and substantial deterioration in oil qualitative properties. Although storage at room temperature is common for use in households, storage of at low temperatures (4 °C) significantly increases the possibility of prolonged shelf life of cold-pressed rapeseed oil.

  19. [Corpse disposal by concealment in transport containers or packaging materials: Examination by post-mortem computed tomography (PMCT) before forensic autopsy].

    PubMed

    Hasegawa, Iwao; Heinemann, Axel; Jahnke, Philipp; Wilke, Nadine; Kammal, Michael; Püschel, Klaus

    2014-01-01

    The presented case reports illustrate the value of post-mortem computed tomography in cases of homicide in which the body was hidden in a container or packaging material and could not be inspected directly from outside. In Case 1, the body was forced into a suitcase, which was then thrown into a flood basin. Post-mortem computed tomography (PMCT) visualized the compressed and extremely flexed body inside the suitcase as well as fractures of the left temporal bone, the left ulna and the left side of the mandible. After recovery of the body, the consequences of long-term immersion in fresh water became visible. At autopsy, a laceration in the left temporal region and a temporal bone fracture were observed. The fractures of the left ulna and the left jaw were associated with moderate hematoma. In Case 2, the body of an 11-year-old girl was retrieved from a plastic bag concealed in a garden shed. The cause of death was ligature strangulation. In the presented cases, PMCT was performed as part of the police investigations for reliable primary documentation of the contents of the containers without further manipulation. Thus the human body, its position inside the container and the presence of bone injuries could be demonstrated before opening the container. In such cases, post-mortem imaging provides reliable and rapid information to the investigating authorities before autopsy already.

  20. 49 CFR 173.411 - Industrial packagings.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS REGULATIONS SHIPPERS-GENERAL REQUIREMENTS FOR SHIPMENTS AND PACKAGINGS Class 7 (Radioactive) Materials § 173.411 Industrial packagings. (a) General. Each... contents are restricted to solid materials; (ii) They satisfy the requirements for Type IP-1 specified in...

  1. 49 CFR 173.411 - Industrial packagings.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS REGULATIONS SHIPPERS-GENERAL REQUIREMENTS FOR SHIPMENTS AND PACKAGINGS Class 7 (Radioactive) Materials § 173.411 Industrial packagings. (a) General. Each... contents are restricted to solid materials; (ii) They satisfy the requirements for Type IP-1 specified in...

  2. 49 CFR 173.411 - Industrial packagings.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS REGULATIONS SHIPPERS-GENERAL REQUIREMENTS FOR SHIPMENTS AND PACKAGINGS Class 7 (Radioactive) Materials § 173.411 Industrial packagings. (a) General. Each... contents are restricted to solid materials; (ii) They satisfy the requirements for Type IP-1 specified in...

  3. A Thermodynamics Course Package in Onenote

    ERIC Educational Resources Information Center

    Falconer, John L.; Nicodemus, Garret D.; Medlin, J. Will; deGrazia, Janet; McDanel, Katherine P.

    2014-01-01

    A ready-to-use package of active-learning materials for a semester-long chemical engineering thermodynamics course was prepared for instructors, and similar materials are being prepared for a material and energy balance course. The course package includes ConcepTests, explanations of the ConcepTests for instructors, links to screencasts, chapter…

  4. Aquaculture information package

    SciTech Connect

    Boyd, T.; Rafferty, K.

    1998-08-01

    This package of information is intended to provide background information to developers of geothermal aquaculture projects. The material is divided into eight sections and includes information on market and price information for typical species, aquaculture water quality issues, typical species culture information, pond heat loss calculations, an aquaculture glossary, regional and university aquaculture offices and state aquaculture permit requirements. A bibliography containing 68 references is also included.

  5. Packaging food for radiation processing

    NASA Astrophysics Data System (ADS)

    Komolprasert, Vanee

    2016-12-01

    Irradiation can play an important role in reducing pathogens that cause food borne illness. Food processors and food safety experts prefer that food be irradiated after packaging to prevent post-irradiation contamination. Food irradiation has been studied for the last century. However, the implementation of irradiation on prepackaged food still faces challenges on how to assess the suitability and safety of these packaging materials used during irradiation. Irradiation is known to induce chemical changes to the food packaging materials resulting in the formation of breakdown products, so called radiolysis products (RP), which may migrate into foods and affect the safety of the irradiated foods. Therefore, the safety of the food packaging material (both polymers and adjuvants) must be determined to ensure safety of irradiated packaged food. Evaluating the safety of food packaging materials presents technical challenges because of the range of possible chemicals generated by ionizing radiation. These challenges and the U.S. regulations on food irradiation are discussed in this article.

  6. Electro-Microfluidic Packaging

    NASA Astrophysics Data System (ADS)

    Benavides, G. L.; Galambos, P. C.

    2002-06-01

    There are many examples of electro-microfluidic products that require cost effective packaging solutions. Industry has responded to a demand for products such as drop ejectors, chemical sensors, and biological sensors. Drop ejectors have consumer applications such as ink jet printing and scientific applications such as patterning self-assembled monolayers or ejecting picoliters of expensive analytes/reagents for chemical analysis. Drop ejectors can be used to perform chemical analysis, combinatorial chemistry, drug manufacture, drug discovery, drug delivery, and DNA sequencing. Chemical and biological micro-sensors can sniff the ambient environment for traces of dangerous materials such as explosives, toxins, or pathogens. Other biological sensors can be used to improve world health by providing timely diagnostics and applying corrective measures to the human body. Electro-microfluidic packaging can easily represent over fifty percent of the product cost and, as with Integrated Circuits (IC), the industry should evolve to standard packaging solutions. Standard packaging schemes will minimize cost and bring products to market sooner.

  7. Nanocellulose in green food packaging.

    PubMed

    Vilarinho, Fernanda; Sanches Silva, Ana; Vaz, M Fátima; Farinha, José Paulo

    2017-01-26

    The development of packaging materials with new functionalities and lower environmental impact is now an urgent need of our society. On one hand, the shelf-life extension of packaged products can be an answer to the exponential increase of worldwide demand for food. On the other hand, uncertainty of crude oil prices and reserves has imposed the necessity to find raw materials to replace oil-derived polymers. Additionally, consumers' awareness toward environmental issues increasingly pushes industries to look with renewed interest to "green" solutions. In response to these issues, numerous polymers have been exploited to develop biodegradable food packaging materials. Although the use of biopolymers has been limited due to their poor mechanical and barrier properties, these can be enhanced by adding reinforcing nanosized components to form nanocomposites. Cellulose is probably the most used and well-known renewable and sustainable raw material. The mechanical properties, reinforcing capabilities, abundance, low density, and biodegradability of nanosized cellulose make it an ideal candidate for polymer nanocomposites processing. Here we review the potential applications of cellulose based nanocomposites in food packaging materials, highlighting the several types of biopolymers with nanocellulose fillers that have been used to form bio-nanocomposite materials. The trends in nanocellulose packaging applications are also addressed.

  8. Effectiveness of the International Phytosanitary Standard ISPM No. 15 on Reducing Wood Borer Infestation Rates in Wood Packaging Material Entering the United States

    PubMed Central

    Haack, Robert A.; Britton, Kerry O.; Brockerhoff, Eckehard G.; Cavey, Joseph F.; Garrett, Lynn J.; Kimberley, Mark; Lowenstein, Frank; Nuding, Amelia; Olson, Lars J.; Turner, James; Vasilaky, Kathryn N.

    2014-01-01

    Numerous bark- and wood-infesting insects have been introduced to new countries by international trade where some have caused severe environmental and economic damage. Wood packaging material (WPM), such as pallets, is one of the high risk pathways for the introduction of wood pests. International recognition of this risk resulted in adoption of International Standards for Phytosanitary Measures No. 15 (ISPM15) in 2002, which provides treatment standards for WPM used in international trade. ISPM15 was originally developed by members of the International Plant Protection Convention to “practically eliminate” the risk of international transport of most bark and wood pests via WPM. The United States (US) implemented ISPM15 in three phases during 2005–2006. We compared pest interception rates of WPM inspected at US ports before and after US implementation of ISPM15 using the US Department of Agriculture AQIM (Agriculture Quarantine Inspection Monitoring) database. Analyses of records from 2003–2009 indicated that WPM infestation rates declined 36–52% following ISPM15 implementation, with results varying in statistical significance depending on the selected starting parameters. Power analyses of the AQIM data indicated there was at least a 95% chance of detecting a statistically significant reduction in infestation rates if they dropped by 90% post-ISPM15, but the probability fell as the impact of ISPM15 lessened. We discuss several factors that could have reduced the apparent impact of ISPM15 on lowering WPM infestation levels, and suggest ways that ISPM15 could be improved. The paucity of international interception data impeded our ability to conduct more thorough analyses of the impact of ISPM15, and demonstrates the need for well-planned sampling programs before and after implementation of major phytosanitary policies so that their effectiveness can be assessed. We also present summary data for bark- and wood-boring insects intercepted on WPM at US ports

  9. Effectiveness of the International Phytosanitary Standard ISPM No. 15 on reducing wood borer infestation rates in wood packaging material entering the United States.

    PubMed

    Haack, Robert A; Britton, Kerry O; Brockerhoff, Eckehard G; Cavey, Joseph F; Garrett, Lynn J; Kimberley, Mark; Lowenstein, Frank; Nuding, Amelia; Olson, Lars J; Turner, James; Vasilaky, Kathryn N

    2014-01-01

    Numerous bark- and wood-infesting insects have been introduced to new countries by international trade where some have caused severe environmental and economic damage. Wood packaging material (WPM), such as pallets, is one of the high risk pathways for the introduction of wood pests. International recognition of this risk resulted in adoption of International Standards for Phytosanitary Measures No. 15 (ISPM15) in 2002, which provides treatment standards for WPM used in international trade. ISPM15 was originally developed by members of the International Plant Protection Convention to "practically eliminate" the risk of international transport of most bark and wood pests via WPM. The United States (US) implemented ISPM15 in three phases during 2005-2006. We compared pest interception rates of WPM inspected at US ports before and after US implementation of ISPM15 using the US Department of Agriculture AQIM (Agriculture Quarantine Inspection Monitoring) database. Analyses of records from 2003-2009 indicated that WPM infestation rates declined 36-52% following ISPM15 implementation, with results varying in statistical significance depending on the selected starting parameters. Power analyses of the AQIM data indicated there was at least a 95% chance of detecting a statistically significant reduction in infestation rates if they dropped by 90% post-ISPM15, but the probability fell as the impact of ISPM15 lessened. We discuss several factors that could have reduced the apparent impact of ISPM15 on lowering WPM infestation levels, and suggest ways that ISPM15 could be improved. The paucity of international interception data impeded our ability to conduct more thorough analyses of the impact of ISPM15, and demonstrates the need for well-planned sampling programs before and after implementation of major phytosanitary policies so that their effectiveness can be assessed. We also present summary data for bark- and wood-boring insects intercepted on WPM at US ports during 1984-2008.

  10. Changes in pectin methyl esterase activity with different packaging materials and stages of fruit harvesting during cold storage of pear cv. Punjab beauty.

    PubMed

    Kaur, Kirandeep; Dhillon, W S; Mahajan, B V C

    2014-10-01

    Pear cv. Punjab Beauty has become quite popular in Punjab. Excessive softening during cold storage leading to low shelf life is the major factor limiting its wider adoption. Studies were, therefore, conducted to determine the firmness and pectin methyl esterase (PME) activity at 4 harvest dates (2nd, 3rd and 4th week of July, and 1st week of August). Various packaging materials i.e. corrugated fiber board boxes and crates with high and low density polyethylene liners, corrugated fiber board boxes, crates and wooden boxes were also evaluated for their role in extending the shelf life of fruits. The enzyme activity and fruit firmness was evaluated periodically after 30, 45, 60 and 75 days of storage at 0-1 °C and 90-95 % RH. The firmness of the fruits decreased with the increase in storage intervals but the enzyme activity increased with the storage period up to 60 days and declined thereafter. Ripening-related changes in all the harvests were characterized mainly by an increase in the solubilization of pectin with a concomitant decrease in the degree of firmness. There was a continuous increase in enzyme activity with the advancement in harvesting dates and then fell sharply in the advanced ripening stages. Highest pectin methyl esterase activity was in fruits packed in crates followed by wooden boxes and corrugated fiber board boxes while the lowest was recorded in fruits packed in corrugated fiber board boxes with high density polyethylene liners. Therefore, high density polyethylene lined CFB boxes proved to be most effective in preventing the loss in firmness.

  11. Influence of Al 2O 3 additions on the crystallization mechanism and properties of diopside/anorthite hybrid glass-ceramics for LED packaging materials

    NASA Astrophysics Data System (ADS)

    Kang, Mina; Kang, Seunggu

    2011-07-01

    The crystallization mechanism and properties of diopside (CaMgSi 2O 6)/anorthite (CaAl 2Si 2O 8) hybrid glass-ceramics fabricated from a CMSA (CaO-MgO-SiO 2-Al 2O 3) glass system were studied as a function of Al 2O 3 additions. The parent glass prepared was pressed to pellets isostatically and was sintered to produce glass-ceramics. A non-isothermal analysis was performed to study the crystallization behavior of diopside/anorthite hybrid glass-ceramics using differential thermal analysis (DTA) with various heating rates (5-20 K min -1) and John-Mehl-Avrami and Kissinger equations. The occupying ratio of diopside and anorthite phases, crystal identification and microstructure in the glass-ceramics containing various Al 2O 3 contents were analyzed. Also the thermal conductivity and density of diopside/anorthite composites were measured to apply to LED packaging materials. The main crystalline phases for CaO-MgO-SiO 2-Al 2O 3 glass-ceramics system containing 8.6 wt% or less Al 2O 3, and 15.9 wt% or more Al 2O 3 were the diopside and anorthite, respectively. The difference (Δ T) of initiation temperature for crystallized ( Tx) and glass transition temperature ( Tg), calculated from the DTA curve for a glass is inversely proportional to the density of glass-ceramics fabricated from the glass. The highest crystallization temperature was 946 °C for the glass-ceramics containing 27.4 wt% Al 2O 3, which is low enough to apply the LTCC process. The glass-ceramics of diopside base with no Al 2O 3 added had the highest thermal conductivity of 2.372 W/m °C among all specimens fabricated in this study.

  12. Packaging of solid state devices

    DOEpatents

    Glidden, Steven C.; Sanders, Howard D.

    2006-01-03

    A package for one or more solid state devices in a single module that allows for operation at high voltage, high current, or both high voltage and high current. Low thermal resistance between the solid state devices and an exterior of the package and matched coefficient of thermal expansion between the solid state devices and the materials used in packaging enables high power operation. The solid state devices are soldered between two layers of ceramic with metal traces that interconnect the devices and external contacts. This approach provides a simple method for assembling and encapsulating high power solid state devices.

  13. Controlling lipid oxidation of food by active packaging technologies.

    PubMed

    Tian, Fang; Decker, Eric A; Goddard, Julie M

    2013-04-30

    Active packaging is an innovative strategy in preventing lipid oxidation. Different active substances with different mechanisms of action have been investigated for imparting antioxidant activity to active packaging systems, including free radical scavengers, metal chelators, ultraviolet (UV) absorbers, oxygen scavengers, and singlet oxygen quenchers. Antioxidant agents have been incorporated into active packaging systems in different forms, mainly including independent sachet packages, adhesive-bonded labels, physical adsorption/coating on packaging material surface, being incorporated into packaging polymer matrix, multilayer films, and covalent immobilization onto the food contact packaging surface. In this paper, we review recent advances in antioxidant active packaging with the highlight of the development and application of non-migratory active packaging systems. The potential use of emerging technologies in antioxidant active packaging is also emphasized. We further describe challenges and opportunities towards the commercial application of such antioxidant active packaging systems, with a focus on maintaining safety, quality and nutrition of packaged foods.

  14. Microwave thawing package and method

    DOEpatents

    Fathi, Zakaryae; Lauf, Robert J.

    2004-03-16

    A package for containing frozen liquids during an electromagnetic thawing process includes: a first section adapted for containing a frozen material and exposing the frozen material to electromagnetic energy; a second section adapted for receiving thawed liquid material and shielding the thawed liquid material from further exposure to electromagnetic energy; and a fluid communication means for allowing fluid flow between the first section and the second section.

  15. 49 CFR 173.223 - Packagings for certain flammable solids.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ...). (2) Fiberboard box (4G) or fiber drum (1G), with a plastic inner packaging not exceeding 5 kg (11 lbs... 49 Transportation 2 2013-10-01 2013-10-01 false Packagings for certain flammable solids. 173.223...-GENERAL REQUIREMENTS FOR SHIPMENTS AND PACKAGINGS Non-bulk Packaging for Hazardous Materials Other Than...

  16. 49 CFR 173.223 - Packagings for certain flammable solids.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ...). (2) Fiberboard box (4G) or fiber drum (1G), with a plastic inner packaging not exceeding 5 kg (11 lbs... 49 Transportation 2 2012-10-01 2012-10-01 false Packagings for certain flammable solids. 173.223...-GENERAL REQUIREMENTS FOR SHIPMENTS AND PACKAGINGS Non-bulk Packaging for Hazardous Materials Other Than...

  17. 49 CFR 173.223 - Packagings for certain flammable solids.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ...). (2) Fiberboard box (4G) or fiber drum (1G), with a plastic inner packaging not exceeding 5 kg (11 lbs... 49 Transportation 2 2014-10-01 2014-10-01 false Packagings for certain flammable solids. 173.223...-GENERAL REQUIREMENTS FOR SHIPMENTS AND PACKAGINGS Non-bulk Packaging for Hazardous Materials Other Than...

  18. 49 CFR 173.416 - Authorized Type B packages.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 2 2011-10-01 2011-10-01 false Authorized Type B packages. 173.416 Section 173... REQUIREMENTS FOR SHIPMENTS AND PACKAGINGS Class 7 (Radioactive) Materials § 173.416 Authorized Type B packages. Each of the following packages is authorized for shipment of quantities exceeding A1 or A2, as...

  19. 49 CFR 174.50 - Nonconforming or leaking packages.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 2 2011-10-01 2011-10-01 false Nonconforming or leaking packages. 174.50 Section... General Operating Requirements § 174.50 Nonconforming or leaking packages. A leaking non-bulk package may... package containing a hazardous material may be moved without repair or approval only so far as necessary...

  20. 49 CFR 174.50 - Nonconforming or leaking packages.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Nonconforming or leaking packages. 174.50 Section... General Operating Requirements § 174.50 Nonconforming or leaking packages. A leaking non-bulk package may... package containing a hazardous material may be moved without repair or approval only so far as necessary...