Sample records for panel members international

  1. 3. DETAIL OF TRUSS PANELS AND INCLINED PORTAL MEMBER AT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. DETAIL OF TRUSS PANELS AND INCLINED PORTAL MEMBER AT THE SOUTHEAST ENTRANCE TO THE BRIDGE, LOOKING WEST. - Chicago, Madison & Northern Railroad, Sanitary & Ship Canal Bridge, Spanning Sanitary & Ship Canal, east of Kedzie Avenue, Chicago, Cook County, IL

  2. 75 FR 7469 - Panel Member List for Hydropower Licensing Study Dispute Resolution; Notice Extending Filing Date...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-02-19

    ... List for Hydropower Licensing Study Dispute Resolution; Notice Extending Filing Date for Applications for Panel Member List for Hydropower Licensing Study Dispute Resolution February 4, 2010. On October... on a list of resource experts willing to serve as a third panel member in the Commission's hydropower...

  3. Prevalence of financial conflicts of interest among panel members producing clinical practice guidelines in Canada and United States: cross sectional study.

    PubMed

    Neuman, Jennifer; Korenstein, Deborah; Ross, Joseph S; Keyhani, Salomeh

    2011-10-11

    To determine the prevalence of financial conflicts of interest among members of panels producing clinical practice guidelines on screening, treatment, or both for hyperlipidaemia or diabetes. Cross sectional study. Relevant guidelines published by national organisations in the United States and Canada between 2000 and 2010. Members of guideline panels. Prevalence of financial conflicts of interest among members of guideline panels and chairs of panels. Fourteen guidelines met our search criteria, of which five had no accompanying declaration of conflicts of interest by panel members. 288 panel members had participated in the guideline development process. Among the 288 panel members, 138 (48%) reported conflicts of interest at the time of the publication of the guideline and 150 (52%) either stated that they had no such conflicts or did not have an opportunity to declare any. Among 73 panellists who formally declared no conflicts, 8 (11%) were found to have one or more. Twelve of the 14 guideline panels evaluated identified chairs, among whom six had financial conflicts of interest. Overall, 150 (52%) panel members had conflicts, of which 138 were declared and 12 were undeclared. Panel members from government sponsored guidelines were less likely to have conflicts of interest compared with guidelines sponsored by non-government sources (15/92 (16%) v 135/196 (69%); P<0.001). The prevalence of financial conflicts of interest and their under-reporting by members of panels producing clinical practice guidelines on hyperlipidaemia or diabetes was high, and a relatively high proportion of guidelines did not have public disclosure of conflicts of interest. Organisations that produce guidelines should minimise conflicts of interest among panel members to ensure the credibility and evidence based nature of the guidelines' content.

  4. 78 FR 66422 - Appointment of Members of the Legal Division to the Performance Review Board, Internal Revenue...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-05

    ... DEPARTMENT OF THE TREASURY Appointment of Members of the Legal Division to the Performance Review... Performance Review Board, Internal Revenue Service Panel: 1. Chairperson, Christopher Sterner, Deputy Chief... & Accounting) This publication is required by 5 U.S.C. 4314(c)(4). [[Page 66423

  5. Lightweight, Thermally Insulating Structural Panels

    NASA Technical Reports Server (NTRS)

    Eisen, Howard J.; Hickey, Gregory; Wen, Liang-Chi; Layman, William E.; Rainen, Richard A.; Birur, Gajanana C.

    1996-01-01

    Lightweight, thermally insulating panels that also serve as structural members developed. Honeycomb-core panel filled with low-thermal-conductivity, opacified silica aerogel preventing convection and minimizes internal radiation. Copper coating on face sheets reduces radiation. Overall thermal conductivities of panels smaller than state-of-art commercial non-structurally-supporting foam and fibrous insulations. On Earth, panels suitable for use in low-air-pressure environments in which lightweight, compact, structurally supporting insulation needed; for example, aboard high-altitude aircraft or in partially evacuated panels in refrigerators.

  6. International Focus: Highlighting APPA Members Worldwide

    ERIC Educational Resources Information Center

    Glazner, Steve, Comp.

    2011-01-01

    While most APPA member institutions are located in the United States and Canada, there are also 45 of member institutions located internationally--from Australia and New Zealand to Southeast Asia to the Middle East to Europe. This article focuses on four of its international members: (1) American University of Kuwait (AUK); (2) American University…

  7. Innovation in values based public health nursing student selection: A qualitative evaluation of candidate and selection panel member perspectives.

    PubMed

    McGraw, Caroline; Abbott, Stephen; Brook, Judy

    2018-02-19

    Values based recruitment emerges from the premise that a high degree of value congruence, or the extent to which an individual's values are similar to those of the health organization in which they work, leads to organizational effectiveness. The aim of this evaluation was to explore how candidates and selection panel members experienced and perceived innovative methods of values based public health nursing student selection. The evaluation was framed by a qualitative exploratory design involving semi-structured interviews and a group exercise. Data were thematically analyzed. Eight semi-structured interviews were conducted with selection panel members. Twenty-two successful candidates took part in a group exercise. The use of photo elicitation interviews and situational judgment questions in the context of selection to a university-run public health nursing educational program was explored. While candidates were ambivalent about the use of photo elicitation interviews, with some misunderstanding the task, selection panel members saw the benefits for improving candidate expression and reducing gaming and deception. Situational interview questions were endorsed by candidates and selection panel members due to their fidelity to real-life problems and the ability of panel members to discern value congruence from candidates' responses. Both techniques offered innovative solutions to candidate selection for entry to the public health nursing education program. © 2018 Wiley Periodicals, Inc.

  8. 77 FR 13389 - Art Advisory Panel of the Commissioner of Internal Revenue

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-06

    ... 2512 of the Internal Revenue Code of 1986. In order for the Panel to perform this function, Panel... Administration, has also approved renewal of the Panel. The membership of the Panel is balanced between museum...

  9. NAS Panel faults export controls

    NASA Astrophysics Data System (ADS)

    Katzoff, Judith A.

    A study prepared by a top-level panel says that current export controls on militarily sensitive U.S. technology may be “overcorrecting” previous weaknesses in that system, resulting in “a complex and confusing control system” that makes it more difficult for U.S. businesses to compete in international markets. Moreover, this control system has “an increasingly corrosive effect” on U.S. relations with allies. The panel recommended that the United States concentrate more effort on bringing about uniformity in the export control policies of countries belonging to the Coordinating Committee on Multilateral Export Controls (CoCom), i.e., most of the member nations in NATO (the North Atlantic Treaty Organization) and Japan.The 21-member panel was appointed by the Committee on Science, Engineering, and Public Policy (COSEPUP), a joint unit of the National Academy of Sciences (NAS), the National Academy of Engineering (NAE), and the Institute of Medicine (IOM). The panel, composed of administrators, researchers, and former government officials, was chaired by AGU member Lew Allen, Jr., director of the Jet Propulsion Laboratory (Pasadena, Calif.) and former chief of staff of the U.S. Air Force. Their report was supported by NAS funds, by a number of private organizations (including AGU), by the U.S. Departments of Commerce, Defense, Energy, and State, by the National Science Foundation, and by the National Aeronautics and Space Administration.

  10. 78 FR 76285 - Proposed Information Collection; Comment Request; Panel Member Survey To Develop Indicators of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-17

    ... Collection; Comment Request; Panel Member Survey To Develop Indicators of Resilient Coastal Tourism AGENCY... survey is to better understand the factors that shape the tourism industry's ability to adapt to or.... resiliency) in order to develop a set of indicators to measure the resiliency of coastal tourism. To help...

  11. Panel 5: Microbiology and Immunology Panel

    PubMed Central

    Murphy, Timothy F.; Chonmaitree, Tasnee; Barenkamp, Stephen; Kyd, Jennelle; Nokso-Koivisto, Johanna; Patel, Janak A.; Heikkinen, Terho; Yamanaka, Noboru; Ogra, Pearay; Swords, W. Edward; Sih, Tania; Pettigrew, Melinda M.

    2014-01-01

    Objective The objective is to perform a comprehensive review of the literature from January 2007 through June 2011 on the virology, bacteriology, and immunology related to otitis media. Data Sources PubMed database of the National Library of Medicine. Review Methods Three subpanels with co-chairs comprising experts in the virology, bacteriology, and immunology of otitis media were formed. Each of the panels reviewed the literature in their respective fields and wrote draft reviews. The reviews were shared with all panel members, and a second draft was created. The entire panel met at the 10th International Symposium on Recent Advances in Otitis Media in June 2011 and discussed the review and refined the content further. A final draft was created, circulated, and approved by the panel. Conclusion Excellent progress has been made in the past 4 years in advancing an understanding of the microbiology and immunology of otitis media. Advances include laboratory-based basic studies, cell-based assays, work in animal models, and clinical studies. Implications for Practice The advances of the past 4 years formed the basis of a series of short-term and long-term research goals in an effort to guide the field. Accomplishing these goals will provide opportunities for the development of novel interventions, including new ways to better treat and prevent otitis media. PMID:23536533

  12. Panel 4: Report of the Microbiology Panel

    PubMed Central

    Barenkamp, Stephen J.; Chonmaitree, Tasnee; Hakansson, Anders P.; Heikkinen, Terho; King, Samantha; Nokso-Koivisto, Johanna; Novotny, Laura A.; Patel, Janak A.; Pettigrew, Melinda; Swords, W. Edward

    2017-01-01

    Objective To perform a comprehensive review of the literature from July 2011 until June 2015 on the virology and bacteriology of otitis media in children. Data Sources PubMed database of the National Library of Medicine. Review Methods Two subpanels comprising experts in the virology and bacteriology of otitis media were created. Each panel reviewed the relevant literature in the fields of virology and bacteriology and generated draft reviews. These initial reviews were distributed to all panel members prior to meeting together at the Post-symposium Research Conference of the 18th International Symposium on Recent Advances in Otitis Media, National Harbor, Maryland, in June 2015. A final draft was created, circulated, and approved by all panel members. Conclusions Excellent progress has been made in the past 4 years in advancing our understanding of the microbiology of otitis media. Numerous advances were made in basic laboratory studies, in animal models of otitis media, in better understanding the epidemiology of disease, and in clinical practice. Implications for Practice (1) Many viruses cause acute otitis media without bacterial coinfection, and such cases do not require antibiotic treatment. (2) When respiratory syncytial virus, metapneumovirus, and influenza virus peak in the community, practitioners can expect to see an increase in clinical otitis media cases. (3) Biomarkers that predict which children with upper respiratory tract infections will develop otitis media may be available in the future. (4) Compounds that target newly identified bacterial virulence determinants may be available as future treatment options for children with otitis media. PMID:28372529

  13. Panel 4: Report of the Microbiology Panel.

    PubMed

    Barenkamp, Stephen J; Chonmaitree, Tasnee; Hakansson, Anders P; Heikkinen, Terho; King, Samantha; Nokso-Koivisto, Johanna; Novotny, Laura A; Patel, Janak A; Pettigrew, Melinda; Swords, W Edward

    2017-04-01

    Objective To perform a comprehensive review of the literature from July 2011 until June 2015 on the virology and bacteriology of otitis media in children. Data Sources PubMed database of the National Library of Medicine. Review Methods Two subpanels comprising experts in the virology and bacteriology of otitis media were created. Each panel reviewed the relevant literature in the fields of virology and bacteriology and generated draft reviews. These initial reviews were distributed to all panel members prior to meeting together at the Post-symposium Research Conference of the 18th International Symposium on Recent Advances in Otitis Media, National Harbor, Maryland, in June 2015. A final draft was created, circulated, and approved by all panel members. Conclusions Excellent progress has been made in the past 4 years in advancing our understanding of the microbiology of otitis media. Numerous advances were made in basic laboratory studies, in animal models of otitis media, in better understanding the epidemiology of disease, and in clinical practice. Implications for Practice (1) Many viruses cause acute otitis media without bacterial coinfection, and such cases do not require antibiotic treatment. (2) When respiratory syncytial virus, metapneumovirus, and influenza virus peak in the community, practitioners can expect to see an increase in clinical otitis media cases. (3) Biomarkers that predict which children with upper respiratory tract infections will develop otitis media may be available in the future. (4) Compounds that target newly identified bacterial virulence determinants may be available as future treatment options for children with otitis media.

  14. Solar panel truss mounting systems and methods

    DOEpatents

    Al-Haddad, Tristan Farris; Cavieres, Andres; Gentry, Russell; Goodman, Joseph; Nolan, Wade; Pitelka, Taylor; Rahimzadeh, Keyan; Brooks, Bradley; Lohr, Joshua; Crooks, Ryan; Porges, Jamie; Rubin, Daniel

    2015-10-20

    An exemplary embodiment of the present invention provides a solar panel truss mounting system comprising a base and a truss assembly coupled to the base. The truss assembly comprises a first panel rail mount, second panel rail mount parallel to the first panel rail mount, base rail mount parallel to the first and second panel rail mounts, and a plurality of support members. A first portion of the plurality of support members extends between the first and second panel rail mounts. A second portion of the plurality of support members extends between the first panel rail mount and the base rail mount. A third portion of the plurality of support members extends between the second panel rail mount and the base rail mount. The system can further comprise a plurality of connectors for coupling a plurality of photovoltaic solar panels to the truss assembly.

  15. Solar panel truss mounting systems and methods

    DOEpatents

    Al-Haddad, Tristan Farris; Cavieres, Andres; Gentry, Russell; Goodman, Joseph; Nolan, Wade; Pitelka, Taylor; Rahimzadeh, Keyan; Brooks, Bradley; Lohr, Joshua; Crooks, Ryan; Porges, Jamie; Rubin, Daniel

    2016-06-28

    An exemplary embodiment of the present invention provides a solar panel truss mounting system comprising a base and a truss assembly coupled to the base. The truss assembly comprises a first panel rail mount, second panel rail mount parallel to the first panel rail mount, base rail mount parallel to the first and second panel rail mounts, and a plurality of support members. A first portion of the plurality of support members extends between the first and second panel rail mounts. A second portion of the plurality of support members extends between the first panel rail mount and the base rail mount. A third portion of the plurality of support members extends between the second panel rail mount and the base rail mount. The system can further comprise a plurality of connectors for coupling a plurality of photovoltaic solar panels to the truss assembly.

  16. Solar panel truss mounting systems and methods

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Al-Haddad, Tristan Farris; Cavieres, Andres; Gentry, Russell

    An exemplary embodiment of the present invention provides a solar panel truss mounting system comprising a base and a truss assembly coupled to the base. The truss assembly comprises a first panel rail mount, second panel rail mount parallel to the first panel rail mount, base rail mount parallel to the first and second panel rail mounts, and a plurality of support members. A first portion of the plurality of support members extends between the first and second panel rail mounts. A second portion of the plurality of support members extends between the first panel rail mount and the basemore » rail mount. A third portion of the plurality of support members extends between the second panel rail mount and the base rail mount. The system can further comprise a plurality of connectors for coupling a plurality of photovoltaic solar panels to the truss assembly.« less

  17. 76 FR 52016 - NASA International Space Station Advisory Committee and the Aerospace Safety Advisory Panel; Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-19

    ... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice (11-074)] NASA International Space Station Advisory Committee and the Aerospace Safety Advisory Panel; Meeting AGENCY: National Aeronautics and Space... meeting of the NASA International Space Station Advisory Committee and the Aerospace Safety Advisory Panel...

  18. Structural Stability of a Stiffened Aluminum Fuselage Panel Subjected to Combined Mechanical and Internal Pressure Loads

    NASA Technical Reports Server (NTRS)

    Rouse, Marshall; Young, Richard D.; Gehrki, Ralph R.

    2003-01-01

    Results from an experimental and analytical study of a curved stiffened aluminum panel subjected to combined mechanical and internal pressure loads are presented. The panel loading conditions were simulated using a D-box test fixture. Analytical buckling load results calculated from a finite element analysis are presented and compared to experimental results. Buckling results presented indicate that the buckling load of the fuselage panel is significantly influenced by internal pressure loading. The experimental results suggest that the stress distribution is uniform in the panel prior to buckling. Nonlinear finite element analysis results correlates well with experimental results up to buckling.

  19. Panelized wall system with foam core insulation

    DOEpatents

    Kosny, Jan [Oak Ridge, TN; Gaskin, Sally [Houston, TX

    2009-10-20

    A wall system includes a plurality of wall members, the wall members having a first metal panel, a second metal panel, and an insulating core between the first panel and the second panel. At least one of the first panel and the second panel include ridge portions. The insulating core can be a foam, such as a polyurethane foam. The foam can include at least one opacifier to improve the k-factor of the foam.

  20. Fabric panel clean change-out frame

    DOEpatents

    Brown, Ronald M.

    1995-01-31

    A fabric panel clean change-out frame, for use on a containment structure having rigid walls, is formed of a compression frame and a closure panel. The frame is formed of elongated spacers, each carrying a plurality of closely spaced flat springs, and each having a hooked lip extending on the side of the spring facing the spacer. The closure panel is includes a perimeter frame formed of flexible, wedge-shaped frame members that are receivable under the springs to deflect the hooked lips. A groove on the flexible frame members engages the hooked lips and locks the frame members in place under the springs. A flexible fabric panel is connected to the flexible frame members and closes its center.

  1. Don’t Tug on Superman’s Cape: In Defense of Convening Authority Selection and Appointment of Court-Martial Panel Members

    DTIC Science & Technology

    2003-04-01

    Charlottesville, Virginia. Member of the bars of Nebraska and the Court of Appeals for the Armed Forces. This article was submitted in partial completion of the...Oversight of Panel-Member Selection Process ................................. 34 1. 1789 to 1916: A Period of Limited Oversight...Code of Military Justice: New Statutory Limitations on Convening Authority Discretion

  2. Panel 3: Genetics and Precision Medicine of Otitis Media.

    PubMed

    Lin, Jizhen; Hafrén, Hena; Kerschner, Joseph; Li, Jian-Dong; Brown, Steve; Zheng, Qing Y; Preciado, Diego; Nakamura, Yoshihisa; Huang, Qiuhong; Zhang, Yan

    2017-04-01

    Objective The objective is to perform a comprehensive review of the literature up to 2015 on the genetics and precision medicine relevant to otitis media. Data Sources PubMed database of the National Library of Medicine. Review Methods Two subpanels were formed comprising experts in the genetics and precision medicine of otitis media. Each of the panels reviewed the literature in their respective fields and wrote draft reviews. The reviews were shared with all panel members, and a merged draft was created. The entire panel met at the 18th International Symposium on Recent Advances in Otitis Media in June 2015 and discussed the review and refined the content. A final draft was made, circulated, and approved by the panel members. Conclusion Many genes relevant to otitis media have been identified in the last 4 years in advancing our knowledge regarding the predisposition of the middle ear mucosa to commensals and pathogens. Advances include mutant animal models and clinical studies. Many signaling pathways are involved in the predisposition of otitis media. Implications for Practice New knowledge on the genetic background relevant to otitis media forms a basis of novel potential interventions, including potential new ways to treat otitis media.

  3. 78 FR 16756 - International Civil Aviation Organization's (ICAO) Dangerous Goods Panel; Notice of Public Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-18

    ... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration International Civil Aviation Organization's (ICAO) Dangerous Goods Panel; Notice of Public Meeting AGENCY: Federal Aviation Administration... Aviation Organization's (ICAO) Dangerous Goods Panel's (DGP's) Spring Working Group to be held April 15-19...

  4. 77 FR 53250 - International Civil Aviation Organization's (ICAO) Dangerous Goods Panel; Notice of Public Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-31

    ... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration International Civil Aviation Organization's (ICAO) Dangerous Goods Panel; Notice of Public Meeting AGENCY: Federal Aviation Administration... Aviation Organization's (ICAO) Dangerous Goods Panel's (DGP's) Fall Working Group to be held October 15-19...

  5. The supersonic triplet - A new aerodynamic panel singularity with directional properties. [internal wave elimination

    NASA Technical Reports Server (NTRS)

    Woodward, F. A.; Landrum, E. J.

    1979-01-01

    A new supersonic triplet singularity has been developed which eliminates internal waves generated by panels having supersonic edges. The triplet is a linear combination of source and vortex distributions which provides the desired directional properties in the flow field surrounding the panel. The theoretical development of the triplet is described, together with its application to the calculation of surface pressure on arbitrary body shapes. Examples are presented comparing the results of the new method with other supersonic panel methods and with experimental data.

  6. 77 FR 21157 - Internal Revenue Service; Open Meeting of the Taxpayer Advocacy Panel Refund Processing...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-09

    ... public comments, ideas, and suggestions on improving customer service at the Internal Revenue Service... DEPARTMENT OF THE TREASURY Internal Revenue Service; Open Meeting of the Taxpayer Advocacy Panel Refund Processing Communications Project Committee AGENCY: Internal Revenue Service (IRS), Treasury...

  7. Results and harmonization guidelines from two large-scale international Elispot proficiency panels conducted by the Cancer Vaccine Consortium (CVC/SVI).

    PubMed

    Janetzki, Sylvia; Panageas, Katherine S; Ben-Porat, Leah; Boyer, Jean; Britten, Cedrik M; Clay, Timothy M; Kalos, Michael; Maecker, Holden T; Romero, Pedro; Yuan, Jianda; Kast, W Martin; Hoos, Axel

    2008-03-01

    The Cancer Vaccine Consortium of the Sabin Vaccine Institute (CVC/SVI) is conducting an ongoing large-scale immune monitoring harmonization program through its members and affiliated associations. This effort was brought to life as an external validation program by conducting an international Elispot proficiency panel with 36 laboratories in 2005, and was followed by a second panel with 29 participating laboratories in 2006 allowing for application of learnings from the first panel. Critical protocol choices, as well as standardization and validation practices among laboratories were assessed through detailed surveys. Although panel participants had to follow general guidelines in order to allow comparison of results, each laboratory was able to use its own protocols, materials and reagents. The second panel recorded an overall significantly improved performance, as measured by the ability to detect all predefined responses correctly. Protocol choices and laboratory practices, which can have a dramatic effect on the overall assay outcome, were identified and lead to the following recommendations: (A) Establish a laboratory SOP for Elispot testing procedures including (A1) a counting method for apoptotic cells for determining adequate cell dilution for plating, and (A2) overnight rest of cells prior to plating and incubation, (B) Use only pre-tested serum optimized for low background: high signal ratio, (C) Establish a laboratory SOP for plate reading including (C1) human auditing during the reading process and (C2) adequate adjustments for technical artifacts, and (D) Only allow trained personnel, which is certified per laboratory SOPs to conduct assays. Recommendations described under (A) were found to make a statistically significant difference in assay performance, while the remaining recommendations are based on practical experiences confirmed by the panel results, which could not be statistically tested. These results provide initial harmonization guidelines

  8. MO-E-BRB-03: Panel Member

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Salter, B.

    2016-06-15

    In this interactive session, lung SBRT patient cases will be presented to highlight real-world considerations for ensuring safe and accurate treatment delivery. An expert panel of speakers will discuss challenges specific to lung SBRT including patient selection, patient immobilization techniques, 4D CT simulation and respiratory motion management, target delineation for treatment planning, online treatment alignment, and established prescription regimens and OAR dose limits. Practical examples of cases, including the patient flow thought the clinical process are presented and audience participation will be encouraged. This panel session is designed to provide case demonstration and review for lung SBRT in terms ofmore » (1) clinical appropriateness in patient selection, (2) strategies for simulation, including 4D and respiratory motion management, and (3) applying multi imaging modality (4D CT imaging, MRI, PET) for tumor volume delineation and motion extent, and (4) image guidance in treatment delivery. Learning Objectives: Understand the established requirements for patient selection in lung SBRT Become familiar with the various immobilization strategies for lung SBRT, including technology for respiratory motion management Understand the benefits and pitfalls of applying multi imaging modality (4D CT imaging, MRI, PET) for tumor volume delineation and motion extent determination for lung SBRT Understand established prescription regimes and OAR dose limits.« less

  9. MO-E-BRB-01: Panel Member

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Benedict, S.

    2016-06-15

    In this interactive session, lung SBRT patient cases will be presented to highlight real-world considerations for ensuring safe and accurate treatment delivery. An expert panel of speakers will discuss challenges specific to lung SBRT including patient selection, patient immobilization techniques, 4D CT simulation and respiratory motion management, target delineation for treatment planning, online treatment alignment, and established prescription regimens and OAR dose limits. Practical examples of cases, including the patient flow thought the clinical process are presented and audience participation will be encouraged. This panel session is designed to provide case demonstration and review for lung SBRT in terms ofmore » (1) clinical appropriateness in patient selection, (2) strategies for simulation, including 4D and respiratory motion management, and (3) applying multi imaging modality (4D CT imaging, MRI, PET) for tumor volume delineation and motion extent, and (4) image guidance in treatment delivery. Learning Objectives: Understand the established requirements for patient selection in lung SBRT Become familiar with the various immobilization strategies for lung SBRT, including technology for respiratory motion management Understand the benefits and pitfalls of applying multi imaging modality (4D CT imaging, MRI, PET) for tumor volume delineation and motion extent determination for lung SBRT Understand established prescription regimes and OAR dose limits.« less

  10. MO-F-201-01: Panel Member

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Evans, J.

    The goal of this session is to provide guidance to medical physicists undergoing the American Board of Radiology certification process in therapeutic medical physics. This panel discussion will focus on parts 2 (computer-based) and 3 (oral) of the examination. Unlike the latter portions of the exam which are specialty-driven, part 1 is universal for all medical physics fields and will not be addressed. This session is structured into different topics that aim to guide the participants on how to successfully prepare for the board exams. The subjects of discussion will include timing and strategies for exam preparation, crucial differences inmore » preparing for the clinical computer-based exam versus the oral exam, what study tools are currently available for each, etc. The panel discussion format will allow the speakers to collectively present their experience and advice relating to each topic and foment audience participation. Learning Objectives: Know the main differences between what is expected for parts 2 and 3 Know different resources for test preparation Know how to formulate a plan to best study for each part based on the specific skill set the two parts require Know how to best present his/her answers during the oral examination – demeanor, answer structure, etc.« less

  11. MO-F-201-03: Panel Member

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Studenski, M.

    The goal of this session is to provide guidance to medical physicists undergoing the American Board of Radiology certification process in therapeutic medical physics. This panel discussion will focus on parts 2 (computer-based) and 3 (oral) of the examination. Unlike the latter portions of the exam which are specialty-driven, part 1 is universal for all medical physics fields and will not be addressed. This session is structured into different topics that aim to guide the participants on how to successfully prepare for the board exams. The subjects of discussion will include timing and strategies for exam preparation, crucial differences inmore » preparing for the clinical computer-based exam versus the oral exam, what study tools are currently available for each, etc. The panel discussion format will allow the speakers to collectively present their experience and advice relating to each topic and foment audience participation. Learning Objectives: Know the main differences between what is expected for parts 2 and 3 Know different resources for test preparation Know how to formulate a plan to best study for each part based on the specific skill set the two parts require Know how to best present his/her answers during the oral examination – demeanor, answer structure, etc.« less

  12. MO-F-201-04: Panel Member

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    McNutt, T.

    The goal of this session is to provide guidance to medical physicists undergoing the American Board of Radiology certification process in therapeutic medical physics. This panel discussion will focus on parts 2 (computer-based) and 3 (oral) of the examination. Unlike the latter portions of the exam which are specialty-driven, part 1 is universal for all medical physics fields and will not be addressed. This session is structured into different topics that aim to guide the participants on how to successfully prepare for the board exams. The subjects of discussion will include timing and strategies for exam preparation, crucial differences inmore » preparing for the clinical computer-based exam versus the oral exam, what study tools are currently available for each, etc. The panel discussion format will allow the speakers to collectively present their experience and advice relating to each topic and foment audience participation. Learning Objectives: Know the main differences between what is expected for parts 2 and 3 Know different resources for test preparation Know how to formulate a plan to best study for each part based on the specific skill set the two parts require Know how to best present his/her answers during the oral examination – demeanor, answer structure, etc.« less

  13. MO-F-201-02: Panel Member

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Padilla, L.

    The goal of this session is to provide guidance to medical physicists undergoing the American Board of Radiology certification process in therapeutic medical physics. This panel discussion will focus on parts 2 (computer-based) and 3 (oral) of the examination. Unlike the latter portions of the exam which are specialty-driven, part 1 is universal for all medical physics fields and will not be addressed. This session is structured into different topics that aim to guide the participants on how to successfully prepare for the board exams. The subjects of discussion will include timing and strategies for exam preparation, crucial differences inmore » preparing for the clinical computer-based exam versus the oral exam, what study tools are currently available for each, etc. The panel discussion format will allow the speakers to collectively present their experience and advice relating to each topic and foment audience participation. Learning Objectives: Know the main differences between what is expected for parts 2 and 3 Know different resources for test preparation Know how to formulate a plan to best study for each part based on the specific skill set the two parts require Know how to best present his/her answers during the oral examination – demeanor, answer structure, etc.« less

  14. Report of the panel on international programs

    NASA Technical Reports Server (NTRS)

    Anderson, Allen Joel; Fuchs, Karl W.; Ganeka, Yasuhiro; Gaur, Vinod; Green, Andrew A.; Siegfried, W.; Lambert, Anthony; Rais, Jacub; Reighber, Christopher; Seeger, Herman

    1991-01-01

    The panel recommends that NASA participate and take an active role in the continuous monitoring of existing regional networks, the realization of high resolution geopotential and topographic missions, the establishment of interconnection of the reference frames as defined by different space techniques, the development and implementation of automation for all ground-to-space observing systems, calibration and validation experiments for measuring techniques and data, the establishment of international space-based networks for real-time transmission of high density space data in standardized formats, tracking and support for non-NASA missions, and the extension of state-of-the art observing and analysis techniques to developing nations.

  15. Antiretroviral treatment of adult HIV infection: 2008 recommendations of the International AIDS Society-USA panel.

    PubMed

    Hammer, Scott M; Eron, Joseph J; Reiss, Peter; Schooley, Robert T; Thompson, Melanie A; Walmsley, Sharon; Cahn, Pedro; Fischl, Margaret A; Gatell, Jose M; Hirsch, Martin S; Jacobsen, Donna M; Montaner, Julio S G; Richman, Douglas D; Yeni, Patrick G; Volberding, Paul A

    2008-08-06

    The availability of new antiretroviral drugs and formulations, including drugs in new classes, and recent data on treatment choices for antiretroviral-naive and -experienced patients warrant an update of the International AIDS Society-USA guidelines for the use of antiretroviral therapy in adult human immunodeficiency virus (HIV) infection. To summarize new data in the field and to provide current recommendations for the antiretroviral management and laboratory monitoring of HIV infection. This report provides guidelines in key areas of antiretroviral management: when to initiate therapy, choice of initial regimens, patient monitoring, when to change therapy, and how best to approach treatment options, including optimal use of recently approved drugs (maraviroc, raltegravir, and etravirine) in treatment-experienced patients. A 14-member panel with expertise in HIV research and clinical care was appointed. Data published or presented at selected scientific conferences since the last panel report (August 2006) through June 2008 were identified. Data that changed the previous guidelines were reviewed by the panel (according to section). Guidelines were drafted by section writing committees and were then reviewed and edited by the entire panel. Recommendations were made by panel consensus. New data and considerations support initiating therapy before CD4 cell count declines to less than 350/microL. In patients with 350 CD4 cells/microL or more, the decision to begin therapy should be individualized based on the presence of comorbidities, risk factors for progression to AIDS and non-AIDS diseases, and patient readiness for treatment. In addition to the prior recommendation that a high plasma viral load (eg, >100,000 copies/mL) and rapidly declining CD4 cell count (>100/microL per year) should prompt treatment initiation, active hepatitis B or C virus coinfection, cardiovascular disease risk, and HIV-associated nephropathy increasingly prompt earlier therapy. The initial

  16. Response of Composite Fuselage Sandwich Side Panels Subjected to Internal Pressure and Axial Tension

    NASA Technical Reports Server (NTRS)

    Rouse, Marshall; Ambur, Damodar R.; Dopker, Bernard; Shah, Bharat

    1998-01-01

    The results from an experimental and analytical study of two composite sandwich fuselage side panels for a transport aircraft are presented. Each panel has two window cutouts and three frames and utilizes a distinctly different structural concept. These panels have been evaluated with internal pressure loads that generate biaxial tension loading conditions. Design limit load and design ultimate load tests have been performed on both panels. One of the sandwich panels was tested with the middle frame removed to demonstrate the suitability of this two-frame design for supporting the prescribed biaxial loading conditions with twice the initial frame spacing of 20 inches. A damage tolerance study was conducted on the two-frame panel by cutting a notch in the panel that originates at the edge of a cutout and extends in the panel hoop direction through the window-belt area. This panel with a notch was tested in a combined-load condition to demonstrate the structural damage tolerance at the design limit load condition. Both the sandwich panel designs successfully satisfied all desired load requirements in the experimental part of the study, and experimental results from the two-frame panel with and without damage are fully explained by the analytical results. The results of this study suggest that there is potential for using sandwich structural concepts with greater than the usual 20-in. wide frame spacing to further reduce aircraft fuselage structural weight.

  17. Effect of air flow, panel curvature, and internal pressurization on field-incidence transmission loss

    NASA Technical Reports Server (NTRS)

    Koval, L. R.

    1976-01-01

    In the context of sound transmission through aircraft fuselage panels, equations for the field-incidence transmission loss (TL) of a single-walled panel are derived that include the effects of external air flow, panel curvature, and internal fuselage pressurization. Flow is shown to provide a modest increase in TL that is uniform with frequency up to the critical frequency. The increase is about 2 dB at Mach number M = 0.5, and about 3.5 dB at M = 1. Above the critical frequency where TL is damping controlled, the increase can be slightly larger at certain frequencies. Curvature is found to stiffen the panel, thereby increasing the TL at low frequencies, but also to introduce a dip at the 'ring frequency' of a full cylinder having the same radius as the panel. Pressurization appears to produce a slight decrease in TL throughout the frequency range, and also slightly shifts the dips at the critical frequency and at the ring frequency.

  18. Evaluation of a Composite Sandwich Fuselage Side Panel with Damage and Subjected to Internal Pressure

    NASA Technical Reports Server (NTRS)

    Rouse, Marshall; Ambur, Damodar R.; Bodine, Jerry; Dopker, Bernhard

    1997-01-01

    The results from an experimental and analytical study of a composite sandwich fuselage side panel for a transport aircraft are presented. The panel has two window cutouts and three frames, and has been evaluated with internal pressure loads that generate biaxial tension loading conditions. Design limit load and design ultimate load tests have been performed on the graphite-epoxy sandwich panel with the middle frame removed to demonstrate the suitability of this two-frame design for supporting the prescribed biaxial loading conditions with twice the initial frame spacing of 20 inches. The two-frame panel was damaged by cutting a notch that originates at the edge of a cutout and extends in the panel hoop direction through the window-belt area. This panel with a notch was tested in a combined-load condition to demonstrate the structural damage tolerance at the design limit load condition. The two panel configurations successfully satisfied all design load requirements in the experimental part of the study, and the three-frame and two-frame panel responses are fully explained by the analysis results. The results of this study suggest that there is potential for using sandwich structural concepts with greater than the usual 20-in.-wide frame spacing to further reduce aircraft fuselage structural weight.

  19. How a concerned family member, friend or member of the public can help someone with gambling problems: a Delphi consensus study.

    PubMed

    Bond, Kathy S; Jorm, Anthony F; Miller, Helen E; Rodda, Simone N; Reavley, Nicola J; Kelly, Claire M; Kitchener, Betty A

    2016-02-03

    Gambling is an enjoyable recreational pursuit for many people. However, for some it can lead to significant harms. The Delphi expert consensus method was used to develop guidelines for how a concerned family member, friend or member of the public can recognise the signs of gambling problems and support a person to change their gambling. A systematic review of websites, books and journal articles was conducted to develop a questionnaire containing items about the knowledge, skills and actions needed for supporting a person with gambling problems. These items were rated over three rounds by two international expert panels comprising people with a lived experience of gambling problems and professionals who treat people with gambling problems or research gambling problems. A total of 66 experts (34 with lived experience and 32 professionals) rated 412 helping statements according to whether they thought the statements should be included in these guidelines. There were 234 helping statements that were endorsed by at least 80 % of members of both of the expert panels. These endorsed statements were used to develop the guidelines. Two groups of experts were able to reach substantial consensus on how someone can recognise the signs of gambling problems and support a person to change.

  20. Application of a low order panel method to complex three-dimensional internal flow problems

    NASA Technical Reports Server (NTRS)

    Ashby, D. L.; Sandlin, D. R.

    1986-01-01

    An evaluation of the ability of a low order panel method to predict complex three-dimensional internal flow fields was made. The computer code VSAERO was used as a basis for the evaluation. Guidelines for modeling internal flow geometries were determined and the effects of varying the boundary conditions and the use of numerical approximations on the solutions accuracy were studied. Several test cases were run and the results were compared with theoretical or experimental results. Modeling an internal flow geometry as a closed box with normal velocities specified on an inlet and exit face provided accurate results and gave the user control over the boundary conditions. The values of the boundary conditions greatly influenced the amount of leakage an internal flow geometry suffered and could be adjusted to eliminate leakage. The use of the far-field approximation to reduce computation time influenced the accuracy of a solution and was coupled with the values of the boundary conditions needed to eliminate leakage. The error induced in the influence coefficients by using the far-field approximation was found to be dependent on the type of influence coefficient, the far-field radius, and the aspect ratio of the panels.

  1. Panel Session on the Future of Few-Body Physics

    NASA Astrophysics Data System (ADS)

    Bakker, Bernard L. G.; Carbonell, Jaume; Elster, Charlotte; Epelbaum, Evgeny; Kalantar-Nayestanaki, Nasser; Richard, Jean-Marc

    2014-08-01

    During the 22nd European Few-Body Conference, a session was devoted to a panel discussion on the future of few-body physics. The panel members were Charlotte Elster, Jaume Carbonell, Evgeny Epelbaum, Nasser Kalantar-Nayestanaki, and Jean-Marc Richard. The session was chaired by Ben Bakker. After presentations by the panel members, several topics were discussed with the audience. The conclusions of this discussion are presented in this paper.

  2. The effect of air flow, panel curvature, and internal pressurization on field-incidence transmission loss. [acoustic propagation through aircraft fuselage

    NASA Technical Reports Server (NTRS)

    Koval, L. R.

    1975-01-01

    In the context of sound transmission through aircraft fuselage panels, equations for the field-incidence transmission loss (TL) of a single-walled panel are derived that include the effects of external air flow, panel curvature, and internal fuselage pressurization. These effects are incorporated into the classical equations for the TL of single panels, and the resulting double integral for field-incidence TL is numerically evaluated for a specific set of parameters.

  3. Solar panels for the International Space Station are uncrated and moved in the SSPF

    NASA Technical Reports Server (NTRS)

    1998-01-01

    In the Space Station Processing Facility, a worker (left) guides the lifting of solar panels for the International Space Station (ISS). The panels are the first set of U.S.-provided solar arrays and batteries for ISS, scheduled to be part of mission STS-97 in December 1999. The mission, fifth in the U.S. flights for construction of ISS, will build and enhance the capabilities of the Space Station. It will deliver the solar panels as well as radiators to provide cooling. The Shuttle will spend 5 days docked to the station, which at that time will be staffed by the first station crew. Two space walks will be conducted to complete assembly operations while the arrays are attached and unfurled. A communications system for voice and telemetry also will be installed.

  4. Establishment of an International University: Report of the United Nations Panel of Experts and the Director-General's Proposals in This Connexion.

    ERIC Educational Resources Information Center

    United Nations Educational, Scientific, and Cultural Organization, Paris (France).

    This document contains the report and recommendations of the United Nations Panel of Experts on the Establishment of an International University. The panel feels that such a university would be highly beneficial to all nations. The first function of an International University would be to concern itself with problems such as those of coexistence…

  5. Human Factors and the International Space Station

    NASA Technical Reports Server (NTRS)

    Peacock, Brian; Rajulu, Sudhakar; Novak, Jennifer; Rathjen, Thomas; Whitmore, Mihriban; Maida, James; Woolford, Barbara

    2001-01-01

    The purposes of this panel are to inform the human factors community regarding the challenges of designing the International Space Station (ISS) and to stimulate the broader human factors community into participating in the various basic and applied research opportunities associated with the ISS. This panel describes the variety of techniques used to plan and evaluate human factors for living and working in space. The panel members have contributed to many different aspects of the ISS design and operations. Architecture, equipment, and human physical performance requirements for various tasks have all been tailored to the requirements of operating in microgravity.

  6. Propulsion and Energetics Panel Working Group 14 on Suitable Averaging Techniques in Non-Uniform Internal Flows

    DTIC Science & Technology

    1983-06-01

    PANEL WORKING GROUP 14 on SUITABLE AVERAGING TECHNIQUES IN NON-UNIFORM INTERNAL FLOWS Edited by M.Pianko Office National d’Etudes et de...d’Etudes et de Recherches Aerospatiales Pratt and Whitney Government Products Division Rocketdyne Division of Rockwell International , Inc. Teledyne CAE...actions exerted by individual components on the gas flow must be known. These specific component effects are distributed internally within the

  7. Solar panels for the International Space Station are uncrated and moved in the SSPF

    NASA Technical Reports Server (NTRS)

    1998-01-01

    In the Space Station Processing Facility, the overhead crane slowly moves solar panels intended for the International Space Station (ISS). The panels are the first set of U.S.-provided solar arrays and batteries for ISS, scheduled to be part of mission STS-97 in December 1999. The mission, fifth in the U.S. flights for construction of ISS, will build and enhance the capabilities of the Space Station. It will deliver the solar panels as well as radiators to provide cooling. The Shuttle will spend 5 days docked to the station, which at that time will be staffed by the first station crew. Two space walks will be conducted to complete assembly operations while the arrays are attached and unfurled. A communications system for voice and telemetry also will be installed. At the left of the crane and panels is the Multipurpose Logistics Module (MPLM), the Leonardo A reusable logistics carrier, the MPLM is scheduled to be launched on Space Shuttle Mission STS-100, targeted for April 2000.

  8. Solar panels for the International Space Station are uncrated and moved in the SSPF

    NASA Technical Reports Server (NTRS)

    1998-01-01

    In the Space Station Processing Facility, workers on the floor watch as the overhead crane moves solar panels intended for the International Space Station (ISS). The panels are the first set of U.S.-provided solar arrays and batteries for ISS, scheduled to be part of mission STS-97 in December 1999. The mission, fifth in the U.S. flights for construction of ISS, will build and enhance the capabilities of the Space Station. It will deliver the solar panels as well as radiators to provide cooling. The Shuttle will spend five days docked to the station, which at that time will be staffed by the first station crew. Two space walks will be conducted to complete assembly operations while the arrays are attached and unfurled. A communications system for voice and telemetry also will be installed.

  9. Internal Stress Monitoring of In-Service Structural Steel Members with Ultrasonic Method

    PubMed Central

    Li, Zuohua; He, Jingbo; Teng, Jun; Wang, Ying

    2016-01-01

    Internal stress in structural steel members is an important parameter for steel structures in their design, construction, and service stages. However, it is hard to measure via traditional approaches. Among the existing non-destructive testing (NDT) methods, the ultrasonic method has received the most research attention. Longitudinal critically refracted (Lcr) waves, which propagate parallel to the surface of the material within an effective depth, have shown great potential as an effective stress measurement approach. This paper presents a systematic non-destructive evaluation method to determine the internal stress in in-service structural steel members using Lcr waves. Based on theory of acoustoelasticity, a stress evaluation formula is derived. Factor of stress to acoustic time difference is used to describe the relationship between stress and measurable acoustic results. A testing facility is developed and used to demonstrate the performance of the proposed method. Two steel members are measured by using the proposed method and the traditional strain gauge method for verification. Parametric studies are performed on three steel members and the aluminum plate to investigate the factors that influence the testing results. The results show that the proposed method is effective and accurate for determining stress in in-service structural steel members. PMID:28773347

  10. Internal Stress Monitoring of In-Service Structural Steel Members with Ultrasonic Method.

    PubMed

    Li, Zuohua; He, Jingbo; Teng, Jun; Wang, Ying

    2016-03-23

    Internal stress in structural steel members is an important parameter for steel structures in their design, construction, and service stages. However, it is hard to measure via traditional approaches. Among the existing non-destructive testing (NDT) methods, the ultrasonic method has received the most research attention. Longitudinal critically refracted (Lcr) waves, which propagate parallel to the surface of the material within an effective depth, have shown great potential as an effective stress measurement approach. This paper presents a systematic non-destructive evaluation method to determine the internal stress in in-service structural steel members using Lcr waves. Based on theory of acoustoelasticity, a stress evaluation formula is derived. Factor of stress to acoustic time difference is used to describe the relationship between stress and measurable acoustic results. A testing facility is developed and used to demonstrate the performance of the proposed method. Two steel members are measured by using the proposed method and the traditional strain gauge method for verification. Parametric studies are performed on three steel members and the aluminum plate to investigate the factors that influence the testing results. The results show that the proposed method is effective and accurate for determining stress in in-service structural steel members.

  11. KENNEDY SPACE CENTER, FLA. - STS-114 Mission Specialists Andrew Thomas and Soichi Noguchi look at the leading edge of Discovery’s wing with RCC panels removed. Noguchi is with the Japanese Aerospace and Exploration Agency. Crew members are at KSC becoming familiar with Shuttle and mission equipment. The mission is Logistics Flight 1, which is scheduled to deliver supplies and equipment plus the external stowage platform to the International Space Station.

    NASA Image and Video Library

    2004-03-05

    KENNEDY SPACE CENTER, FLA. - STS-114 Mission Specialists Andrew Thomas and Soichi Noguchi look at the leading edge of Discovery’s wing with RCC panels removed. Noguchi is with the Japanese Aerospace and Exploration Agency. Crew members are at KSC becoming familiar with Shuttle and mission equipment. The mission is Logistics Flight 1, which is scheduled to deliver supplies and equipment plus the external stowage platform to the International Space Station.

  12. 49 CFR 845.22 - Technical panel.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 7 2010-10-01 2010-10-01 false Technical panel. 845.22 Section 845.22... Technical panel. The Director, Bureau of Accident Investigation, or the Director, Bureau of Field Operations, shall designate members of the Board's technical staff to participate in the hearing and initially...

  13. Aerospace Safety Advisory Panel

    NASA Technical Reports Server (NTRS)

    1999-01-01

    This report covers the activities of the Aerospace Safety Advisory Panel (ASAP) for calendar year 1998-a year of sharp contrasts and significant successes at NASA. The year opened with the announcement of large workforce cutbacks. The slip in the schedule for launching the International Space Station (ISS) created a five-month hiatus in Space Shuttle launches. This slack period ended with the successful and highly publicized launch of the STS-95 mission. As the year closed, ISS assembly began with the successful orbiting and joining of the Functional Cargo Block (FGB), Zarya, from Russia and the Unity Node from the United States. Throughout the year, the Panel maintained its scrutiny of NASA's safety processes. Of particular interest were the potential effects on safety of workforce reductions and the continued transition of functions to the Space Flight Operations Contractor. Attention was also given to the risk management plans of the Aero-Space Technology programs, including the X-33, X-34, and X-38. Overall, the Panel concluded that safety is well served for the present. The picture is not as clear for the future. Cutbacks have limited the depth of talent available. In many cases, technical specialties are 'one deep.' The extended hiring freeze has resulted in an older workforce that will inevitably suffer significant departures from retirements in the near future. The resulting 'brain drain' could represent a future safety risk unless appropriate succession planning is started expeditiously. This and other topics are covered in the section addressing workforce. The major NASA programs are also limited in their ability to plan property for the future. This is of particular concern for the Space Shuttle and ISS because these programs are scheduled to operate well into the next century. In the case of the Space Shuttle, beneficial and mandatory safety and operational upgrades are being delayed because of a lack of sufficient present funding. Likewise, the ISS has

  14. Supporting public involvement in interview and other panels: a systematic review.

    PubMed

    Baxter, Susan; Clowes, Mark; Muir, Delia; Baird, Wendy; Broadway-Parkinson, Andrea; Bennett, Carole

    2017-10-01

    Members of the public are increasingly being invited to become members of a variety of different panels and boards. This study aimed to systematically search the literature to identify studies relating to support or training provided to members of the public who are asked to be members of an interview panel. A systematic search for published and unpublished studies was carried out from June to September 2015. The search methods included electronic database searching, reference list screening, citation searching and scrutinizing online sources. We included studies of any design including published and unpublished documents which outlined preparation or guidance relating to public participants who were members of interview panels or representatives on other types of panels or committees. Results were synthesised via narrative methods. Thirty-six documents were included in the review. Scrutiny of this literature highlighted ten areas which require consideration when including members of the public on interview panels: financial resources; clarity of role; role in the interview process; role in evaluation; training; orientation/induction; information needs; terminology; support; and other public representative needs such as timing, accessibility and support with information technology. The results of the review emphasize a range of elements that need to be fully considered when planning the involvement of public participants on interview panels. It highlights potential issues relating to the degree of involvement of public representatives in evaluating/grading decisions and the need for preparation and on-going support. © 2016 The Authors. Health Expectations Published by John Wiley & Sons Ltd.

  15. SU-B-BRA-07: Panel Member

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Halvorsen, P.

    2016-06-15

    In the current rapidly changing Healthcare environment, many groups are competing for limited resources. How can medical physicists position themselves to be a relevant stakeholder in the discussion of how those resources are allocated Our value goes beyond what can be shown in a business plan and is heavily involved with safety and quality. Three areas will be explored: What is our value? Who needs to receive that message? How do we communicate that message? To help frame the discussion in terms of how other stakeholders may view the value of medical physicists, a physician and an administrator will presentmore » their perspective. Lastly, a multidisciplinary panel will present real life examples of strategies that can be utilized today to establish the value of medical physicists. The presentation of these examples will lead into an interactive question and answer time. V. Willcut, I work for Elekta. There was no research associated with this talk.« less

  16. SU-B-BRA-09: Panel Member

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Willcut, V.

    2016-06-15

    In the current rapidly changing Healthcare environment, many groups are competing for limited resources. How can medical physicists position themselves to be a relevant stakeholder in the discussion of how those resources are allocated Our value goes beyond what can be shown in a business plan and is heavily involved with safety and quality. Three areas will be explored: What is our value? Who needs to receive that message? How do we communicate that message? To help frame the discussion in terms of how other stakeholders may view the value of medical physicists, a physician and an administrator will presentmore » their perspective. Lastly, a multidisciplinary panel will present real life examples of strategies that can be utilized today to establish the value of medical physicists. The presentation of these examples will lead into an interactive question and answer time. V. Willcut, I work for Elekta. There was no research associated with this talk.« less

  17. SU-B-BRA-08: Panel Member

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hazle, J.

    2016-06-15

    In the current rapidly changing Healthcare environment, many groups are competing for limited resources. How can medical physicists position themselves to be a relevant stakeholder in the discussion of how those resources are allocated Our value goes beyond what can be shown in a business plan and is heavily involved with safety and quality. Three areas will be explored: What is our value? Who needs to receive that message? How do we communicate that message? To help frame the discussion in terms of how other stakeholders may view the value of medical physicists, a physician and an administrator will presentmore » their perspective. Lastly, a multidisciplinary panel will present real life examples of strategies that can be utilized today to establish the value of medical physicists. The presentation of these examples will lead into an interactive question and answer time. V. Willcut, I work for Elekta. There was no research associated with this talk.« less

  18. SU-B-BRA-05: Panel Member

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Pavord, D.

    2016-06-15

    In the current rapidly changing Healthcare environment, many groups are competing for limited resources. How can medical physicists position themselves to be a relevant stakeholder in the discussion of how those resources are allocated Our value goes beyond what can be shown in a business plan and is heavily involved with safety and quality. Three areas will be explored: What is our value? Who needs to receive that message? How do we communicate that message? To help frame the discussion in terms of how other stakeholders may view the value of medical physicists, a physician and an administrator will presentmore » their perspective. Lastly, a multidisciplinary panel will present real life examples of strategies that can be utilized today to establish the value of medical physicists. The presentation of these examples will lead into an interactive question and answer time. V. Willcut, I work for Elekta. There was no research associated with this talk.« less

  19. SU-B-BRA-06: Panel Member

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Clements, J.

    2016-06-15

    In the current rapidly changing Healthcare environment, many groups are competing for limited resources. How can medical physicists position themselves to be a relevant stakeholder in the discussion of how those resources are allocated Our value goes beyond what can be shown in a business plan and is heavily involved with safety and quality. Three areas will be explored: What is our value? Who needs to receive that message? How do we communicate that message? To help frame the discussion in terms of how other stakeholders may view the value of medical physicists, a physician and an administrator will presentmore » their perspective. Lastly, a multidisciplinary panel will present real life examples of strategies that can be utilized today to establish the value of medical physicists. The presentation of these examples will lead into an interactive question and answer time. V. Willcut, I work for Elekta. There was no research associated with this talk.« less

  20. Implementation of a panel of service users for the evaluation of mental health outpatient services.

    PubMed

    Perreault, Michel; Renaud, Jeff; Bourassa, Francine; Beauchesne, Louise; Mpiana, André; Bernier, Sylvain; Milton, Diana

    2010-12-01

    The purpose of this study is to describe the experience of a standing panel of psychiatric outpatients over a period of five years. The procedure is used as a complementary method to assess client satisfaction regarding services provided by a Montreal psychiatric institute. During this period, 13 meetings were held, involving a total of 22 patients as active members of the panel. These sessions allowed 11 decision makers of the institute to consult the panel regarding various topics such as service organization, quality of services, and client information. In a context of internal evaluation, by giving direct and rapid access to service users' perspectives on key issues regarding service provision, the panel appeared to be a practical procedure for use in complement with other satisfaction assessment methods. Unplanned effects included the recruitment of participants as patient representatives on different hospital committees and associations, and as presenters in conferences and congresses.

  1. 75 FR 73166 - Art Advisory Panel-Closed Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-11-29

    ... DEPARTMENT OF THE TREASURY Internal Revenue Service Art Advisory Panel--Closed Meeting AGENCY: Internal Revenue Service, Treasury. ACTION: Notice of Closed Meeting of Art Advisory Panel for Decorative Art. SUMMARY: A closed meeting of the Art Advisory Panel will be held in Washington, DC. DATES: The...

  2. Heat Conductivity Resistance of Concrete Wall Panel by Water Flowing in Different Orientations of Internal PVC pipe

    NASA Astrophysics Data System (ADS)

    Umi, N. N.; Norazman, M. N.; Daud, N. M.; Yusof, M. A.; Yahya, M. A.; Othman, M.

    2018-04-01

    Green building technology and sustainability development is current focus in the world nowadays. In Malaysia and most tropical countries the maximum temperature recorded typically at 35°C. Air-conditioning system has become a necessity in occupied buildings, thereby increasing the cost of electric consumption. The aim of this study is to find out the solution in minimizing heat transfer from the external environment and intentions towards going green. In this study, the experimental work includes testing three types of concrete wall panels. The main heat intervention material in this research is 2 inch diameter Polyvinyl Chloride (PVC) pipe embedded at the center of the concrete wall panel, while the EPS foam beads were added to the cement content in the concrete mix forming the outer layer of the wall panel. Water from the rainwater harvesting system is regulated in the PVC pipe to intervene with the heat conductivity through the wall panel. Results from the experimental works show that the internal surface temperature of these heat resistance wall panels is to 3□C lower than control wall panel from plain interlocking bricks.

  3. Solar panels for the International Space Station are uncrated and moved in the SSPF

    NASA Technical Reports Server (NTRS)

    1998-01-01

    Solar panels for the International Space Station (ISS) are uncrated in the Space Station Processing Facility. They are the first set of U.S.-provided solar arrays and batteries for ISS, scheduled to be part of mission STS-97 in December 1999. The mission, fifth in the U.S. flights for construction of ISS, will build and enhance the capabilities of Space Station. It will deliver the solar panels as well as radiators to provide cooling. The Shuttle will spend 5 days docked to the station, which at that time will be staffed by the first station crew. Two space walks will be conducted to complete assembly operations while the arrays are attached and unfurled. A communications system for voice and telemetry also will be installed.

  4. Meeting highlights--International Consensus Panel on the treatment of primary breast cancer.

    PubMed

    Taguchi, Tetsuo

    2002-03-01

    The 7th International Conference on Adjuvant Therapy of Primary Breast Cancer, with several thousand delegates from 70 countries, was held in February 2001 in St. Gallen, Switzerland. Its consensus recommendations were summarized in the Sept. 15 issue of the Journal of Clinical Oncology (Vol. 19, No. 18, 2001: pp 3817-3827). The panel conference developed guidelines advising that all patients with endocrine-responsive tumors receive anti-hormonal therapy, including those at minimal risk of recurrence (defined as a 10% risk at 10 years). The panel further lowered the threshold defining endocrine-responsive disease to tumors containing as few as 1% of cells that stain positive for steroid hormone receptors. Treatment of primary breast cancer should depend on the hormonal status of tumors. The last set of guidelines, issued in 1998, supported a more limited use of endocrine-based therapy, but recent research has convinced the oncology community otherwise. Postmenopausal women have the greatest prevalence of hormone-positive tumors, and more than one-third of breast cancers in women of child-bearing age are estrogen dependent. The panel also highlighted several other important advances, including: the importance of factoring patient preferences into treatment decisions; the value of sentinel lymph node biopsy in avoiding extensive surgery; and incorporation of new agents and improved outcome in the treatment of breast cancer.

  5. A pilot Internet "Value of Health" Panel: recruitment, participation and compliance

    PubMed Central

    Stein, Ken; Dyer, Matthew; Crabb, Tania; Milne, Ruairidh; Round, Alison; Ratcliffe, Julie; Brazier, John

    2006-01-01

    Objectives To pilot using a panel of members of the public to provide preference data via the Internet Methods A stratified random sample of members of the general public was recruited and familiarised with the standard gamble procedure using an Internet based tool. Health states were perdiodically presented in "sets" corresponding to different conditions, during the study. The following were described: Recruitment (proportion of people approached who were trained); Participation (a) the proportion of people trained who provided any preferences and (b) the proportion of panel members who contributed to each "set" of values; and Compliance (the proportion, per participant, of preference tasks which were completed). The influence of covariates on these outcomes was investigated using univariate and multivariate analyses. Results A panel of 112 people was recruited. 23% of those approached (n = 5,320) responded to the invitation, and 24% of respondents (n = 1,215) were willing to participate (net = 5.5%). However, eventual recruitment rates, following training, were low (2.1% of those approached). Recruitment from areas of high socioeconomic deprivation and among ethnic minority communities was low. Eighteen sets of health state descriptions were considered over 14 months. 74% of panel members carried out at least one valuation task. People from areas of higher socioeconomic deprivation and unmarried people were less likely to participate. An average of 41% of panel members expressed preferences on each set of descriptions. Compliance ranged from 3% to 100%. Conclusion It is feasible to establish a panel of members of the general public to express preferences on a wide range of health state descriptions using the Internet, although differential recruitment and attrition are important challenges. Particular attention to recruitment and retention in areas of high socioeconomic deprivation and among ethnic minority communities is necessary. Nevertheless, the panel

  6. A pilot Internet "value of health" panel: recruitment, participation and compliance.

    PubMed

    Stein, Ken; Dyer, Matthew; Crabb, Tania; Milne, Ruairidh; Round, Alison; Ratcliffe, Julie; Brazier, John

    2006-11-27

    To pilot using a panel of members of the public to provide preference data via the Internet A stratified random sample of members of the general public was recruited and familiarized with the standard gamble procedure using an Internet based tool. Health states were periodically presented in "sets" corresponding to different conditions, during the study. The following were described: Recruitment (proportion of people approached who were trained); Participation (a) the proportion of people trained who provided any preferences and (b) the proportion of panel members who contributed to each "set" of values; and Compliance (the proportion, per participant, of preference tasks which were completed). The influence of covariates on these outcomes was investigated using univariate and multivariate analyses. A panel of 112 people was recruited. 23% of those approached (n = 5,320) responded to the invitation, and 24% of respondents (n = 1,215) were willing to participate (net = 5.5%). However, eventual recruitment rates, following training, were low (2.1% of those approached). Recruitment from areas of high socioeconomic deprivation and among ethnic minority communities was low. Eighteen sets of health state descriptions were considered over 14 months. 74% of panel members carried out at least one valuation task. People from areas of higher socioeconomic deprivation and unmarried people were less likely to participate. An average of 41% of panel members expressed preferences on each set of descriptions. Compliance ranged from 3% to 100%. It is feasible to establish a panel of members of the general public to express preferences on a wide range of health state descriptions using the Internet, although differential recruitment and attrition are important challenges. Particular attention to recruitment and retention in areas of high socioeconomic deprivation and among ethnic minority communities is necessary. Nevertheless, the panel approach to preference measurement using the

  7. Space Exploration Initiative Fuels, Materials and Related Nuclear Propulsion Technologies Panel

    NASA Technical Reports Server (NTRS)

    Bhattacharyya, S. K.; Olsen, C.; Cooper, R.; Matthews, R. B.; Walter, C.; Titran, R. J.

    1993-01-01

    This report was prepared by members of the Fuels, Materials and Related Technologies Panel, with assistance from a number of industry observers as well as laboratory colleagues of the panel members. It represents a consensus view of the panel members. This report was not subjected to a thorough review by DOE, NASA or DoD, and the opinions expressed should not be construed to represent the official position of these organizations, individually or jointly. Topics addressed include: requirement for fuels and materials development for nuclear thermal propulsion (NTP) and nuclear electric propulsion (NEP); overview of proposed concepts; fuels technology development plan; materials technology development plan; other reactor technology development; and fuels and materials requirements for advanced propulsion concepts.

  8. Conflicts of interest among committee members in the National Academies’ genetically engineered crop study

    PubMed Central

    2017-01-01

    The National Academies of Sciences, Engineering and Medicine (NASEM) publishes numerous reports each year that are received with high esteem by the scientific community and public policy makers. The NASEM has internal standards for selecting committee members that author its reports, mostly from academia, and vetting conflicts of interest. This study examines whether there were any financial conflicts of interest (COIs) among the twenty invited committee members who wrote the 2016 report on genetically engineered (GE) crops. Our results showed that six panel members had one or more reportable financial COIs, none of which were disclosed in the report. We also report on institutional COIs held by the NASEM related to the report. The difference between our findings and the NASEM reporting standards are discussed. PMID:28245228

  9. Panel discussion: The future of IR astronomy

    NASA Technical Reports Server (NTRS)

    Caroff, Lawrence J.

    1995-01-01

    A panel discussion was held on the future of IR astronomy. The chairman gave a brief introduction to current planned programs for NASA and other space agencies, followed by short contributions from the six panel members on a variety of special topics. After that, a short question and answer session was held.

  10. 7 CFR 1940.968 - Rural Economic Development Review Panel Grant (Panel Grant).

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ..., but not limited to, the following: (1) Travel and lodging expenses; (2) Salaries for State coordinator...; purchase real estate, equipment or vehicles; rent, improve, or renovate office space; or repair and... otherwise reimburse panel members unless distance traveled exceed 50 miles. (h) Other considerations—(1...

  11. Fracture healing: a consensus report from the International Osteoporosis Foundation Fracture Working Group.

    PubMed

    Silverman, S L; Kupperman, E S; Bukata, S V

    2016-07-01

    We used the RAND UCLA appropriateness method to decide appropriateness of use of osteoporosis medication after incident fracture and potential for fracture healing and make suggestions for trial design for clinical and preclinical research. To develop appropriateness criteria to assist in the use and study of osteoporosis medications in patients with recent fracture and in the potential use of osteoporosis medications to enhance delayed fracture healing. To promote further research by suggesting preclinical and clinical trial design for studies where fracture healing is the endpoint. RAND/UCLA appropriateness method (RUAM). A panel of experts, both members and non-members of the International Osteoporosis Foundation Fracture Working Group, were identified consisting of geriatricians, rheumatologists, orthopedists, endocrinologists, and internists. This resulted in a round 1 panel of 15 panelists, round 2 panel of 15 members, and a round 3 panel of 14 members. Agreement on statements and scenarios using RUAM. Three rounds of voting by panelists took place. Agreement in a third round was reached for 111 statements and scenarios, measured by median panel ratings and the amount of dispersion of panel ratings, based on the interpercentile range. An expert panel validated a set of statements and scenarios about the use of osteoporosis medications after incident fracture and use of these medications to enhance delayed fracture healing and made recommendations for study designs to investigate the effect of osteoporosis medications on fracture healing. The result of this exercise is intended to assist in improving patient care by identifying the appropriateness of use of osteoporosis medications after fracture and in fracture healing and to make suggestions for further preclinical and clinical research.

  12. 34 CFR 350.52 - What is the composition of a peer review panel?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... panel will consider; (ii) The roles of potential panel members in those activities; and (iii) The... Department. (4) Whether the panel includes knowledgeable individuals with disabilities, or parents, family...

  13. 34 CFR 350.52 - What is the composition of a peer review panel?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... panel will consider; (ii) The roles of potential panel members in those activities; and (iii) The... Department. (4) Whether the panel includes knowledgeable individuals with disabilities, or parents, family...

  14. 34 CFR 350.52 - What is the composition of a peer review panel?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... panel will consider; (ii) The roles of potential panel members in those activities; and (iii) The... Department. (4) Whether the panel includes knowledgeable individuals with disabilities, or parents, family...

  15. International definition of a point-of-care test in family practice: a modified e-Delphi procedure.

    PubMed

    Schols, Angel M R; Dinant, Geert-Jan; Hopstaken, Rogier; Price, Christopher P; Kusters, Ron; Cals, Jochen W L

    2018-01-29

    The use of point-of-care tests (POCTs) in family practice is increasing, and the term POCT is often used in medical literature and clinical practice. Yet, no widely supported definition by several professional fields exists. To reach consensus on an international definition of a POCT in family practice. We performed a modified international e-Delphi procedure of four rounds among expert panel members from different professional backgrounds-family practitioners, laboratory specialists, policymakers, researchers and manufacturers. Of 27 panel members from seven different countries, 26 participated in all rounds. Most panel members were active in POCT research or policymaking and 70% worked in family medicine. After choosing important components, structuring of answers and feedback, the following definition was chosen as the best or second best definition by 81% of panel members: a point-of-care test in family practice is a test to support clinical decision making, which is performed by a qualified member of the practice staff nearby the patient and on any part of the patient's body or its derivatives, during or very close to the time of consultation, to help the patient and physician to decide upon the best suited approach, and of which the results should be known at the time of the clinical decision making. The definition emerging from this study can inform family practitioners, laboratory specialists, policymakers and manufacturers on the most widely supported and recognized definition and could act as a clear starting point for the organization and execution of professional point-of-care testing in family practice worldwide. © The Author(s) 2018. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  16. Thermal-Diode Sandwich Panel

    NASA Technical Reports Server (NTRS)

    Basiulis, A.

    1986-01-01

    Thermal diode sandwich panel transfers heat in one direction, but when heat load reversed, switches off and acts as thermal insulator. Proposed to control temperature in spacecraft and in supersonic missiles to protect internal electronics. In combination with conventional heat pipes, used in solar panels and other heat-sensitive systems.

  17. Interest in international surgical volunteerism: results of a survey of members of the American Pediatric Surgical Association.

    PubMed

    Butler, Marilyn W; Krishnaswami, Sanjay; Rothstein, David H; Cusick, Robert A

    2011-12-01

    This study assesses interest in international volunteer work by members of the American Pediatric Surgical Association (APSA) and attempts to identify demographics, motivations, obstacles, and institutional issues of the respondents. An online survey service was used to send a 25-question survey to all APSA members with email addresses in November 2009. An answer to all questions was not required. Written comments were encouraged. The survey was sent to 807 members of whom 316 responded, for a response rate of 39%. International work had been done previously by 48% of respondents, whereas 95% stated that they were interested or perhaps interested in doing so. Most (83%) were interested in operating with local surgeons to teach them how to perform procedures. Altruism was the chief motivation in 75% of respondents. Primary obstacles to doing international work were family obligations and lack of time, although 37% stated that a lack of information about volunteer opportunities was an issue. A significant number of respondents (48%) stated that their institution had no established international collaborations. This study suggests that there is interest in international volunteerism among many members of APSA. Understanding the issues surrounding surgical volunteerism may facilitate humanitarian involvement among pediatric surgeons. Copyright © 2011 Elsevier Inc. All rights reserved.

  18. Perceptions of growth monitoring and promotion among an international panel of district medical officers.

    PubMed

    Roberfroid, Dominique; Lefèvre, Pierre; Hoerée, Tom; Kolsteren, Patrick

    2005-09-01

    The growth chart has been proposed as an educational tool to make the child's growth visible to both health workers and caregivers and to enhance communication between them. In the case of growth faltering, this would trigger timely corrective measures. Although the relevance of growth monitoring and promotion (GMP) has often been questioned in the literature, opinions of District Medical Officers responsible for local implementation of GMP are unknown. The aim of this qualitative research was to explore the perceptions and difficulties of an international panel of District Medical Officers regarding GMP. As an exploratory study, in-depth interviews of an international panel of District Medical Officers (n=19) were conducted. Data were coded using the QSR Nudist 5.0 software. A discrepancy between intended purposes and practice of GMP was detected at two levels. First, lack of participation of care-givers was reported. Second, the District Medical Officers expressed a restrictive interpretation of the concept of growth monitoring. The communication with parents was never reported as a means or a result of GMP, neither as an evaluation criterion of programme efficiency. The growth chart was mainly considered a tool intended to be used by health services for the purpose of diagnosis. This two-fold discrepancy between the intention of international policy-planners and practice of local programme implementers could be a crucial factor affecting the performance of GMP. More emphasis should be put on social communication and involvement of caregivers.

  19. Evaluation of Founding Members of the International Academy of Health Sciences Informatics (IAHSI) Based on Google Scholar and Scopus Parameters

    PubMed Central

    Masic, Izet

    2017-01-01

    Introduction: The International Academy of Health Sciences Informatics (IAHSI) is established by International Medical Informatics Association (IMIA) which is the world body for health and biomedical informatics. The Academy will serve as an honor society that recognizes expertise in biomedical and health informatics internationally. Academy membership will be one of the highest honors in the international field of biomedical and health informatics. Aim: To present scientometric analysis of founding members of the International Academy of Health Sciences Informatics, to evaluate members and their scientific rating. Material and methods: The work has an analytical character and presents analysis of the data obtained from the Google Scholar and Scopus database. Results are shown through number of cases, percentage and graphically. Results: The analysis showed a significant correlation between the Academy and the country (continent) of origin of the academician. In IAHSI are mainly represented academics originating from Europe - 40 members (33,3%), North America - 39 members (32,5%), Asia - 20 members (16,6%), South America - 9 members (7,5%), Australia - 7 members (5,8%), while only 5 members or 4,16% come from Africa. Conclusion: Criteria for number of representatives of each continent to main academic communities are relatively questionable, as this analysis showed. Development of Health Sciences Informatics should be the main purpose, and it should be evenly distributed with slight deviations in number of representatives of each continent. PMID:29284909

  20. Evaluation of Founding Members of the International Academy of Health Sciences Informatics (IAHSI) Based on Google Scholar and Scopus Parameters.

    PubMed

    Masic, Izet

    2017-12-01

    The International Academy of Health Sciences Informatics (IAHSI) is established by International Medical Informatics Association (IMIA) which is the world body for health and biomedical informatics. The Academy will serve as an honor society that recognizes expertise in biomedical and health informatics internationally. Academy membership will be one of the highest honors in the international field of biomedical and health informatics. To present scientometric analysis of founding members of the International Academy of Health Sciences Informatics, to evaluate members and their scientific rating. The work has an analytical character and presents analysis of the data obtained from the Google Scholar and Scopus database. Results are shown through number of cases, percentage and graphically. The analysis showed a significant correlation between the Academy and the country (continent) of origin of the academician. In IAHSI are mainly represented academics originating from Europe - 40 members (33,3%), North America - 39 members (32,5%), Asia - 20 members (16,6%), South America - 9 members (7,5%), Australia - 7 members (5,8%), while only 5 members or 4,16% come from Africa. Criteria for number of representatives of each continent to main academic communities are relatively questionable, as this analysis showed. Development of Health Sciences Informatics should be the main purpose, and it should be evenly distributed with slight deviations in number of representatives of each continent.

  1. TU-A-BRB-03: Panel Member

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Winey, B.

    2016-06-15

    Brain stereotactic radiosurgery (SRS) and spine stereotactic body radiation therapy (SBRT) are commonly treated by a multidisciplinary team of neurosurgeons, radiation oncologists, and medical physicists. However the treatment objectives, constraints, and technical considerations involved can be quite different between the two techniques. In this interactive session an expert panel of speakers will present clinical brain SRS and spine SBRT cases in order to demonstrate real-world considerations for ensuring safe and accurate treatment delivery and to highlight the significant differences in approach for each treatment site. The session will include discussion of topic such as clinical indications, immobilization, target definition, normalmore » tissue tolerance limits, and beam arrangements. Learning Objectives: Understand the differences in indications and dose/fractionation strategies for intracranial SRS and spine SBRT. Describe the different treatment modalities which can be used to deliver intracranial SRS and spine SBRT. Cite the major differences in treatment setup and delivery principles between intracranial and spine treatments. Identify key critical structures and clinical dosimetric tolerance levels for spine SBRT and intracranial SRS. Understand areas of ongoing work to standardize intracranial SRS and spine SBRT procedures. Schlesinger: Research support: Elekta Instruments, AB; D. Schlesinger, Elekta Instruments, AB - research support; B. Winey, No relevant external funding for this subject.« less

  2. TU-A-BRB-02: Panel Member

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Ma, L.

    2016-06-15

    Brain stereotactic radiosurgery (SRS) and spine stereotactic body radiation therapy (SBRT) are commonly treated by a multidisciplinary team of neurosurgeons, radiation oncologists, and medical physicists. However the treatment objectives, constraints, and technical considerations involved can be quite different between the two techniques. In this interactive session an expert panel of speakers will present clinical brain SRS and spine SBRT cases in order to demonstrate real-world considerations for ensuring safe and accurate treatment delivery and to highlight the significant differences in approach for each treatment site. The session will include discussion of topic such as clinical indications, immobilization, target definition, normalmore » tissue tolerance limits, and beam arrangements. Learning Objectives: Understand the differences in indications and dose/fractionation strategies for intracranial SRS and spine SBRT. Describe the different treatment modalities which can be used to deliver intracranial SRS and spine SBRT. Cite the major differences in treatment setup and delivery principles between intracranial and spine treatments. Identify key critical structures and clinical dosimetric tolerance levels for spine SBRT and intracranial SRS. Understand areas of ongoing work to standardize intracranial SRS and spine SBRT procedures. Schlesinger: Research support: Elekta Instruments, AB; D. Schlesinger, Elekta Instruments, AB - research support; B. Winey, No relevant external funding for this subject.« less

  3. TU-A-BRB-01: Panel Member

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Schlesinger, D.

    2016-06-15

    Brain stereotactic radiosurgery (SRS) and spine stereotactic body radiation therapy (SBRT) are commonly treated by a multidisciplinary team of neurosurgeons, radiation oncologists, and medical physicists. However the treatment objectives, constraints, and technical considerations involved can be quite different between the two techniques. In this interactive session an expert panel of speakers will present clinical brain SRS and spine SBRT cases in order to demonstrate real-world considerations for ensuring safe and accurate treatment delivery and to highlight the significant differences in approach for each treatment site. The session will include discussion of topic such as clinical indications, immobilization, target definition, normalmore » tissue tolerance limits, and beam arrangements. Learning Objectives: Understand the differences in indications and dose/fractionation strategies for intracranial SRS and spine SBRT. Describe the different treatment modalities which can be used to deliver intracranial SRS and spine SBRT. Cite the major differences in treatment setup and delivery principles between intracranial and spine treatments. Identify key critical structures and clinical dosimetric tolerance levels for spine SBRT and intracranial SRS. Understand areas of ongoing work to standardize intracranial SRS and spine SBRT procedures. Schlesinger: Research support: Elekta Instruments, AB; D. Schlesinger, Elekta Instruments, AB - research support; B. Winey, No relevant external funding for this subject.« less

  4. Aerospace Safety Advisory Panel

    NASA Technical Reports Server (NTRS)

    2002-01-01

    This Annual Report of the Aerospace Safety Advisory Panel (ASAP) presents results of activities during calendar year 2001. The year was marked by significant achievements in the Space Shuttle and International Space Station (ISS) programs and encouraging accomplishments by the Aerospace Technology Enterprise. Unfortunately, there were also disquieting mishaps with the X-43, a LearJet, and a wind tunnel. Each mishap was analyzed in an orderly process to ascertain causes and derive lessons learned. Both these accomplishments and the responses to the mishaps led the Panel to conclude that safety and risk management is currently being well served within NASA. NASA's operations evidence high levels of safety consciousness and sincere efforts to place safety foremost. Nevertheless, the Panel's safety concerns have never been greater. This dichotomy has arisen because the focus of most NASA programs has been directed toward program survival rather than effective life cycle planning. Last year's Annual Report focused on the need for NASA to adopt a realistically long planning horizon for the aging Space Shuttle so that safety would not erode. NASA's response to the report concurred with this finding. Nevertheless, there has been a greater emphasis on current operations to the apparent detriment of long-term planning. Budget cutbacks and shifts in priorities have severely limited the resources available to the Space Shuttle and ISS for application to risk-reduction and life-extension efforts. As a result, funds originally intended for long-term safety-related activities have been used for operations. Thus, while safety continues to be well served at present, the basis for future safety has eroded. Section II of this report develops this theme in more detail and presents several important, overarching findings and recommendations that apply to many if not all of NASA's programs. Section III of the report presents other significant findings, recommendations and supporting

  5. Lipid Panel

    MedlinePlus

    ... Time and International Normalized Ratio (PT/INR) PSEN1 Quantitative Immunoglobulins Red Blood Cell (RBC) Antibody Identification Red ... typically includes a fasting lipid panel. Beyond that, research continues into the usefulness of other non-traditional ...

  6. 78 FR 57903 - Aerospace Safety Advisory Panel; Charter Renewal

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-09-20

    ... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice: 13-116] Aerospace Safety Advisory Panel; Charter Renewal AGENCY: National Aeronautics and Space Administration (NASA). ACTION: Notice of renewal... except it adds verbiage that a member of the panel shall be allowed necessary travel expenses per statute...

  7. Foster family care review by judicial-citizen panels: an evaluation.

    PubMed

    Lindsey, E W; Wodarski, J S

    1986-01-01

    The findings of this study are mixed. In general, after one year of judicial-citizen review, there is no clear indication that this alternative to internal case review has led to more positive outcomes for children in foster care. This finding should be heartening to public child welfare agency personnel whose motivation for accountability has been called into question by proponents of external foster care review. At least when compared with a new citizen review system, the already existing internal review system measured up quite well. Although the study did not indicate a clear pattern of more positive outcomes for the study group, there is evidence of some favorable characteristics of CRPs that may show promise for the future. With additional training in developing behaviorally measurable and time-limited parental objectives, citizen panels may be able to maintain some of their initial strength in this area. Increased involvement of juvenile court judges in cases where little or no progress is made could motivate some parents to meet specified objectives and speed up the process of terminating parental rights when no progress has been demonstrated within specified time periods. The data also indicate a need for some adjustment to the process used to involve parents in case reviews. Another potentially positive outcome was highlighted during interviews with the juvenile court judges and the DFCS staff in the three study counties. Many of these respondents believed that the process had the potential for moving children out of foster care more quickly than does the internal review process. In addition to this primary goal, however, respondents were excited about the potential for heightened community awareness and education as citizens come to understand more about the plight of foster children and family conditions that can lead to placement. Interviews with panel members themselves indicated a definite belief that the community needed to accept more

  8. 20 CFR 801.301 - Quorum and votes of the permanent Board; panels within the Board.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ..., whenever action is taken by the entire permanent Board sitting en banc, three permanent members of the... except en banc review to panels of three members. Each panel shall consist of at least two permanent... modified by the concurring vote of at least three permanent members sitting en banc. (d) En banc action is...

  9. 20 CFR 801.301 - Quorum and votes of the permanent Board; panels within the Board.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ..., whenever action is taken by the entire permanent Board sitting en banc, three permanent members of the... except en banc review to panels of three members. Each panel shall consist of at least two permanent... modified by the concurring vote of at least three permanent members sitting en banc. (d) En banc action is...

  10. 20 CFR 801.301 - Quorum and votes of the permanent Board; panels within the Board.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ..., whenever action is taken by the entire permanent Board sitting en banc, three permanent members of the... except en banc review to panels of three members. Each panel shall consist of at least two permanent... modified by the concurring vote of at least three permanent members sitting en banc. (d) En banc action is...

  11. 20 CFR 801.301 - Quorum and votes of the permanent Board; panels within the Board.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ..., whenever action is taken by the entire permanent Board sitting en banc, three permanent members of the... except en banc review to panels of three members. Each panel shall consist of at least two permanent... modified by the concurring vote of at least three permanent members sitting en banc. (d) En banc action is...

  12. 20 CFR 801.301 - Quorum and votes of the permanent Board; panels within the Board.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ..., whenever action is taken by the entire permanent Board sitting en banc, three permanent members of the... except en banc review to panels of three members. Each panel shall consist of at least two permanent... modified by the concurring vote of at least three permanent members sitting en banc. (d) En banc action is...

  13. Catastrophic Health Expenditures for Households with Disabled Members: Evidence from the Korean Health Panel

    PubMed Central

    2016-01-01

    Persons with disabilities use more health care services due to ill health and face higher health care expenses and burden. This study explored the incidence of catastrophic health expenditures of households with persons with disabilities compared to that of those without such persons. We used the Korean Health Panel (KHP) dataset for the years 2010 and 2011. The final sample was 5,610 households; 800 (14.3%) of these were households with a person with a disability and 4,810 (85.7%) were households without such a person. Households with a person with a disability faced higher catastrophic health expenditures, spending about 1.2 to 1.4 times more of their annual living expenditures for out-of-pocket medical expenses, compared to households without persons with disabilities. Households having low economic status and members with chronic disease were more likely to face catastrophic health expenditures, while those receiving public assistance were less likely. Exemption or reduction of out-of-pocket payments in the National Health Insurance and additional financial support are needed so that the people with disabilities can use medical services without suffering financial crisis. PMID:26955233

  14. Catastrophic Health Expenditures for Households with Disabled Members: Evidence from the Korean Health Panel.

    PubMed

    Lee, Jeong-Eun; Shin, Hyung-Ik; Do, Young Kyung; Yang, Eun Joo

    2016-03-01

    Persons with disabilities use more health care services due to ill health and face higher health care expenses and burden. This study explored the incidence of catastrophic health expenditures of households with persons with disabilities compared to that of those without such persons. We used the Korean Health Panel (KHP) dataset for the years 2010 and 2011. The final sample was 5,610 households; 800 (14.3%) of these were households with a person with a disability and 4,810 (85.7%) were households without such a person. Households with a person with a disability faced higher catastrophic health expenditures, spending about 1.2 to 1.4 times more of their annual living expenditures for out-of-pocket medical expenses, compared to households without persons with disabilities. Households having low economic status and members with chronic disease were more likely to face catastrophic health expenditures, while those receiving public assistance were less likely. Exemption or reduction of out-of-pocket payments in the National Health Insurance and additional financial support are needed so that the people with disabilities can use medical services without suffering financial crisis.

  15. 78 FR 69097 - Performance Review Board Members

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-18

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Performance Review Board Members Title 5, U.S.C. Section... Performance Review Board Members be published in the Federal Register. The following persons may be named to serve on the Performance Review Boards or Panels, which oversee the evaluation of performance appraisals...

  16. Online market research panel members as controls in case-control studies to investigate gastrointestinal disease outbreaks: early experiences and lessons learnt from the UK.

    PubMed

    Mook, P; McCormick, J; Kanagarajah, S; Adak, G K; Cleary, P; Elson, R; Gobin, M; Hawker, J; Inns, T; Sinclair, C; Trienekens, S C M; Vivancos, R; McCarthy, N D

    2018-03-01

    Established methods of recruiting population controls for case-control studies to investigate gastrointestinal disease outbreaks can be time consuming, resulting in delays in identifying the source or vehicle of infection. After an initial evaluation of using online market research panel members as controls in a case-control study to investigate a Salmonella outbreak in 2013, this method was applied in four further studies in the UK between 2014 and 2016. We used data from all five studies and interviews with members of each outbreak control team and market research panel provider to review operational issues, evaluate risk of bias in this approach and consider methods to reduce confounding and bias. The investigators of each outbreak reported likely time and cost savings from using market research controls. There were systematic differences between case and control groups in some studies but no evidence that conclusions on the likely source or vehicle of infection were incorrect. Potential selection biases introduced by using this sampling frame and the low response rate are unclear. Methods that might reduce confounding and some bias should be balanced with concerns for overmatching. Further evaluation of this approach using comparisons with traditional methods and population-based exposure survey data is recommended.

  17. Oven wall panel construction

    DOEpatents

    Ellison, Kenneth; Whike, Alan S.

    1980-04-22

    An oven roof or wall is formed from modular panels, each of which comprises an inner fabric and an outer fabric. Each such fabric is formed with an angle iron framework and somewhat resilient tie-bars or welded at their ends to flanges of the angle irons to maintain the inner and outer frameworks in spaced disposition while minimizing heat transfer by conduction and permitting some degree of relative movement on expansion and contraction of the module components. Suitable thermal insulation is provided within the module. Panels or skins are secured to the fabric frameworks and each such skin is secured to a framework and projects laterally so as slidingly to overlie the adjacent frame member of an adjacent panel in turn to permit relative movement during expansion and contraction.

  18. 77 FR 9255 - Medicare Program: Notice of Six Membership Appointments to the Advisory Panel on Hospital...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-16

    ... Panel on Hospital Outpatient Payment (HOP, the Panel). The six appointments to the 19 member Panel will... Advisory Panel on Hospital Outpatient Payment (HOP, the Panel) is governed by the provisions of the Federal...

  19. 75 FR 1684 - Art Advisory Panel-Notice of Closed Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-01-12

    ... DEPARTMENT OF THE TREASURY Internal Revenue Service Art Advisory Panel--Notice of Closed Meeting AGENCY: Internal Revenue Service, Treasury. ACTION: Notice of Closed Meeting of Art Advisory Panel. SUMMARY: Closed meeting of the Art Advisory Panel will be held in Washington, DC. DATES: The meeting will...

  20. 76 FR 53169 - Art Advisory Panel-Notice of Closed Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-25

    ... DEPARTMENT OF THE TREASURY Internal Revenue Service Art Advisory Panel--Notice of Closed Meeting AGENCY: Internal Revenue Service, Treasury. ACTION: Notice of closed meeting of Art Advisory Panel for Fine Art. SUMMARY: Closed meeting of the Art Advisory Panel will be held in Washington, DC. DATES: The...

  1. 78 FR 32307 - Art Advisory Panel-Notice of Closed Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-29

    ... DEPARTMENT OF THE TREASURY Internal Revenue Service Art Advisory Panel--Notice of Closed Meeting AGENCY: Internal Revenue Service, Treasury. ACTION: Notice of closed meeting of Art Advisory Panel. SUMMARY: Closed meeting of the Art Advisory Panel will be held in Baltimore, MD. DATES: The meeting will...

  2. 75 FR 19465 - Art Advisory Panel-Notice of Closed Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-14

    ... DEPARTMENT OF THE TREASURY Internal Revenue Service Art Advisory Panel--Notice of Closed Meeting AGENCY: Internal Revenue Service, Treasury. ACTION: Notice of closed meeting of Art Advisory Panel. SUMMARY: Closed meeting of the Art Advisory Panel will be held in Washington, DC. DATES: The meeting will...

  3. 76 FR 17189 - Art Advisory Panel-Notice of closed meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-28

    ... DEPARTMENT OF THE TREASURY Internal Revenue Service Art Advisory Panel--Notice of closed meeting AGENCY: Internal Revenue Service, Treasury. ACTION: Notice of closed meeting of Art Advisory Panel for Fine Art. SUMMARY: Closed meeting of the Art Advisory Panel will be held in Washington, DC. DATES: The...

  4. 75 FR 22437 - Art Advisory Panel-Notice of Closed Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-28

    ... DEPARTMENT OF THE TREASURY Internal Revenue Service Art Advisory Panel--Notice of Closed Meeting AGENCY: Internal Revenue Service, Treasury. ACTION: Notice of Closed Meeting of Art Advisory Panel. SUMMARY: Closed meeting of the Art Advisory Panel will be held in Washington, DC. DATES: The meeting will...

  5. 76 FR 30243 - Art Advisory Panel-Notice of Closed Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-05-24

    ... DEPARTMENT OF THE TREASURY Internal Revenue Service Art Advisory Panel--Notice of Closed Meeting AGENCY: Internal Revenue Service, Treasury. ACTION: Notice of closed meeting of Art Advisory Panel. SUMMARY: Closed meeting of the Art Advisory Panel will be held in Washington, DC. DATES: The meeting will...

  6. 78 FR 59098 - Art Advisory Panel-Notice of Closed Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-09-25

    ... DEPARTMENT OF THE TREASURY Internal Revenue Service Art Advisory Panel--Notice of Closed Meeting AGENCY: Internal Revenue Service, Treasury. ACTION: Notice of closed meeting of Art Advisory Panel. SUMMARY: Closed meeting of the Art Advisory Panel will be held in Washington, DC. DATES: The meeting will...

  7. 78 FR 73586 - Art Advisory Panel-Notice of Closed Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-06

    ... DEPARTMENT OF THE TREASURY Internal Revenue Service Art Advisory Panel--Notice of Closed Meeting AGENCY: Internal Revenue Service, Treasury. ACTION: Notice of Closed Meeting of Art Advisory Panel. SUMMARY: Closed meeting of the Art Advisory Panel will be held in Washington, DC. DATES: The meeting will...

  8. 75 FR 54444 - Art Advisory Panel-Notice of Closed Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-09-07

    ... DEPARTMENT OF THE TREASURY Internal Revenue Service Art Advisory Panel--Notice of Closed Meeting AGENCY: Internal Revenue Service, Treasury. ACTION: Notice of Closed Meeting of Art Advisory Panel for Fine Art. SUMMARY: Closed meeting of the Art Advisory Panel will be held in Washington, DC. DATES: The...

  9. 77 FR 17570 - Art Advisory Panel-Notice of Closed Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-26

    ... DEPARTMENT OF THE TREASURY Internal Revenue Service Art Advisory Panel--Notice of Closed Meeting AGENCY: Internal Revenue Service, Treasury. ACTION: Notice of Closed Meeting of Art Advisory Panel. SUMMARY: Closed meeting of the Art Advisory Panel for Fine Art will be held in New York, NY. DATES: The...

  10. 78 FR 16049 - Art Advisory Panel-Notice of Closed Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-13

    ... DEPARTMENT OF THE TREASURY Internal Revenue Service Art Advisory Panel--Notice of Closed Meeting AGENCY: Internal Revenue Service, Treasury. ACTION: Notice of Closed Meeting of Art Advisory Panel. SUMMARY: Closed meeting of the Art Advisory Panel will be held in New York, NY. DATES: The meeting will be...

  11. 75 FR 22558 - Federal Advisory Committee; Chief of Naval Operations Executive Panel; Charter Renewal

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-29

    ... authorities in the fields of science, engineering, business, and political-military. Panel Members appointed... Panel (hereafter referred to as the Panel). FOR FURTHER INFORMATION CONTACT: Jim Freeman, Deputy... INFORMATION: The Panel is a discretionary Federal advisory committee that shall provide independent advice and...

  12. Concentrating photovoltaic solar panel

    DOEpatents

    Cashion, Steven A; Bowser, Michael R; Farrelly, Mark B; Hines, Braden E; Holmes, Howard C; Johnson, Jr., Richard L; Russell, Richard J; Turk, Michael F

    2014-04-15

    The present invention relates to photovoltaic power systems, photovoltaic concentrator modules, and related methods. In particular, the present invention features concentrator modules having interior points of attachment for an articulating mechanism and/or an articulating mechanism that has a unique arrangement of chassis members so as to isolate bending, etc. from being transferred among the chassis members. The present invention also features adjustable solar panel mounting features and/or mounting features with two or more degrees of freedom. The present invention also features a mechanical fastener for secondary optics in a concentrator module.

  13. 78 FR 7434 - Medicare Program: Notice of Two Membership Appointments to the Advisory Panel on Hospital...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-01

    ... Panel on Hospital Outpatient Payment (HOP, the Panel). The two new appointments to the Panel will each... Classification groups and weights. The Advisory Panel on Hospital Outpatient Payment (HOP, the Panel) is governed... members to the Advisory Panel on Hospital Outpatient Payment (HOP, the Panel) to fill two vacancies on the...

  14. Babes in the Woods: The Wanderings of the National Reading Panel.

    ERIC Educational Resources Information Center

    Yatvin, Joanne

    2002-01-01

    Former member of the National Reading Panel criticizes the composition, deliberations, and decisions of the panel, authorized by Congress in 1997, leading to its April 2000 report supporting the hierarchy-of-skills reading model. (PKP)

  15. 29 CFR 1614.307 - Organization of Special Panel.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Labor Regulations Relating to Labor (Continued) EQUAL EMPLOYMENT OPPORTUNITY COMMISSION FEDERAL SECTOR... each time a panel is convened; and (3) One member of the EEOC designated by the Chairman of the... Chairman of the EEOC shall each designate one member from their respective agencies to serve on the Special...

  16. 29 CFR 1614.307 - Organization of Special Panel.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Labor Regulations Relating to Labor (Continued) EQUAL EMPLOYMENT OPPORTUNITY COMMISSION FEDERAL SECTOR... each time a panel is convened; and (3) One member of the EEOC designated by the Chairman of the... Chairman of the EEOC shall each designate one member from their respective agencies to serve on the Special...

  17. 29 CFR 1614.307 - Organization of Special Panel.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Labor Regulations Relating to Labor (Continued) EQUAL EMPLOYMENT OPPORTUNITY COMMISSION FEDERAL SECTOR... each time a panel is convened; and (3) One member of the EEOC designated by the Chairman of the... Chairman of the EEOC shall each designate one member from their respective agencies to serve on the Special...

  18. 29 CFR 1614.307 - Organization of Special Panel.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Labor Regulations Relating to Labor (Continued) EQUAL EMPLOYMENT OPPORTUNITY COMMISSION FEDERAL SECTOR... each time a panel is convened; and (3) One member of the EEOC designated by the Chairman of the... Chairman of the EEOC shall each designate one member from their respective agencies to serve on the Special...

  19. 29 CFR 1614.307 - Organization of Special Panel.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Labor Regulations Relating to Labor (Continued) EQUAL EMPLOYMENT OPPORTUNITY COMMISSION FEDERAL SECTOR... each time a panel is convened; and (3) One member of the EEOC designated by the Chairman of the... Chairman of the EEOC shall each designate one member from their respective agencies to serve on the Special...

  20. Chinese International Students' and Faculty Members' Views of Plagiarism in Higher Education

    ERIC Educational Resources Information Center

    Grigg, Alan

    2016-01-01

    As the enrollment of Chinese international students (CIS) increased at a private institution in the Midwest, so did suspected cases of plagiarism. This study addressed the problem of how faculty members grappled with CIS' interpretation and application of Western-based views of plagiarism. The purpose of the study was to identify similarities and…

  1. 5 CFR 1501.5 - Panels of the Board.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 5 Administrative Personnel 3 2010-01-01 2010-01-01 false Panels of the Board. 1501.5 Section 1501.5 Administrative Personnel THE INTERNATIONAL ORGANIZATIONS EMPLOYEES LOYALTY BOARD OPERATIONS OF THE INTERNATIONAL ORGANIZATIONS EMPLOYEES LOYALTY BOARD § 1501.5 Panels of the Board. All hearings shall be held by...

  2. Use of Internet panels to conduct surveys.

    PubMed

    Hays, Ron D; Liu, Honghu; Kapteyn, Arie

    2015-09-01

    The use of Internet panels to collect survey data is increasing because it is cost-effective, enables access to large and diverse samples quickly, takes less time than traditional methods to obtain data for analysis, and the standardization of the data collection process makes studies easy to replicate. A variety of probability-based panels have been created, including Telepanel/CentERpanel, Knowledge Networks (now GFK KnowledgePanel), the American Life Panel, the Longitudinal Internet Studies for the Social Sciences panel, and the Understanding America Study panel. Despite the advantage of having a known denominator (sampling frame), the probability-based Internet panels often have low recruitment participation rates, and some have argued that there is little practical difference between opting out of a probability sample and opting into a nonprobability (convenience) Internet panel. This article provides an overview of both probability-based and convenience panels, discussing potential benefits and cautions for each method, and summarizing the approaches used to weight panel respondents in order to better represent the underlying population. Challenges of using Internet panel data are discussed, including false answers, careless responses, giving the same answer repeatedly, getting multiple surveys from the same respondent, and panelists being members of multiple panels. More is to be learned about Internet panels generally and about Web-based data collection, as well as how to evaluate data collected using mobile devices and social-media platforms.

  3. Estimating a Reasonable Patient Panel Size for Primary Care Physicians With Team-Based Task Delegation

    PubMed Central

    Altschuler, Justin; Margolius, David; Bodenheimer, Thomas; Grumbach, Kevin

    2012-01-01

    PURPOSE Primary care faces the dilemma of excessive patient panel sizes in an environment of a primary care physician shortage. We aimed to estimate primary care panel sizes under different models of task delegation to nonphysician members of the primary care team. METHODS We used published estimates of the time it takes for a primary care physician to provide preventive, chronic, and acute care for a panel of 2,500 patients, and modeled how panel sizes would change if portions of preventive and chronic care services were delegated to nonphysician team members. RESULTS Using 3 assumptions about the degree of task delegation that could be achieved (77%, 60%, and 50% of preventive care, and 47%, 30%, and 25% of chronic care), we estimated that a primary care team could reasonably care for a panel of 1,947, 1,523, or 1,387 patients. CONCLUSIONS If portions of preventive and chronic care services are delegated to nonphysician team members, primary care practices can provide recommended preventive and chronic care with panel sizes that are achievable with the available primary care workforce. PMID:22966102

  4. Estimating a reasonable patient panel size for primary care physicians with team-based task delegation.

    PubMed

    Altschuler, Justin; Margolius, David; Bodenheimer, Thomas; Grumbach, Kevin

    2012-01-01

    PURPOSE Primary care faces the dilemma of excessive patient panel sizes in an environment of a primary care physician shortage. We aimed to estimate primary care panel sizes under different models of task delegation to nonphysician members of the primary care team. METHODS We used published estimates of the time it takes for a primary care physician to provide preventive, chronic, and acute care for a panel of 2,500 patients, and modeled how panel sizes would change if portions of preventive and chronic care services were delegated to nonphysician team members. RESULTS Using 3 assumptions about the degree of task delegation that could be achieved (77%, 60%, and 50% of preventive care, and 47%, 30%, and 25% of chronic care), we estimated that a primary care team could reasonably care for a panel of 1,947, 1,523, or 1,387 patients. CONCLUSIONS If portions of preventive and chronic care services are delegated to nonphysician team members, primary care practices can provide recommended preventive and chronic care with panel sizes that are achievable with the available primary care workforce.

  5. Curriculum Studies in Brazil: Intellectual Histories, Present Circumstances. International and Development Education

    ERIC Educational Resources Information Center

    Pinar, William F., Ed.

    2011-01-01

    This collection, comprised of chapters focused on the intellectual histories and present circumstances of curriculum studies in Brazil, is Pinar's summary of exchanges (occurring over a two-year period) between the authors and members of an International Panel (scholars working in Finland, South Africa, the United States). From these and the…

  6. Internal radiation exposure of Ground Self-Defense Force members involved in the management of the Fukushima Nuclear Power Plant disaster.

    PubMed

    Naoi, Yutaka; Fujikawa, Akira; Kyoto, Yukishige; Kunishima, Naoaki; Ono, Masahiro; Watanabe, Yukie

    2013-01-01

    When the Great East Japan Earthquake occurred on March 11, 2011, the Ground Self-Defense Force (GSDF) was dispatched nationally to Northeast area in Japan. The highly trained GSDF members were simultaneously assigned to various missions for the Fukushima Nuclear Power Plants disaster. The missions of GSDF terminated on August 31, 2011. Special medical examinations were conducted for the members as they returned to each military unit. GSDF members who were assigned to the nuclear power plant were at risk of radiation exposure; therefore, pocket dosimeters were used to assess external radiation exposure. A few months after the mission was terminated, measurements of internal radiation exposure were performed. This is the first report of the internal exposure of GSDF members who worked in the restricted radiation contamination area. Here, we report the amounts of internal and external exposure of and the equipment used by the GSDF members.

  7. EUROSCAN INTERNATIONAL NETWORK MEMBER AGENCIES: THEIR STRUCTURE, PROCESSES, AND OUTPUTS.

    PubMed

    Packer, Claire; Simpson, Sue; de Almeida, Rosimary Terezinha

    2015-01-01

    The EuroScan International Network is a global network of publicly funded early awareness and alert (EAA) systems for health technologies. We describe the EuroScan member agency systems and methods, and highlight the potential for increased collaboration. EuroScan members completed postal questionnaires supplemented with telephone interviews in 2012 to elicit additional information and check equivalence of responses. Information was updated between March and May 2013. Fifteen of the seventeen member agencies responded. The principal purpose of agencies is to inform decisions on coverage or reimbursement of health services and decisions on undertaking secondary research. The main users of information are national governments; health professionals; health services purchasers, commissioners, and decision makers; and healthcare providers. Most EuroScan agencies are small with almost half having fewer than two whole time equivalent staff. Ten agencies use both active and passive identification approaches, four use only active approaches. Most start identification in the experimental or investigational stages of the technology life cycle. All agencies assessed technologies when they are between the investigational and established, but under diffusion stages. Barriers to collaboration revolve around different system aims, purposes, and requirements; a lack of staff, finance, or opportunity; language differences; and restrictions on dissemination. Although many barriers to collaboration were identified, the majority of agencies were supportive of increased collaboration either involving the whole EuroScan Network or between individual agencies. Despite differences in the detailed identification processes, members thought that this was the most feasible phase to develop additional collaboration.

  8. Survey of International Members of the American Thoracic Society on Climate Change and Health.

    PubMed

    Sarfaty, Mona; Kreslake, Jennifer; Ewart, Gary; Guidotti, Tee L; Thurston, George D; Balmes, John R; Maibach, Edward W

    2016-10-01

    The American Thoracic Society (ATS), in collaboration with George Mason University, surveyed international members of the society to assess perceptions, clinical experiences, and preferred policy responses related to global climate change. A recruitment email was sent by the ATS President in October 2015 to 5,013 international members. Subsequently, four reminder emails were sent to nonrespondents. Responses were received from 489 members in 68 countries; the response rate was 9.8%. Half of respondents reported working in countries in Asia (25%) or Europe (25%), with the remainder in South America (18%), North America (Canada and Mexico) (18%), Australia or New Zealand (9%), and Africa (6%). Survey estimate confidence intervals were ± 5% or smaller. A high percentage of international ATS survey respondents judged that climate change is happening (96%), that it is driven by human activity (70%), and that it is relevant to patient care ("a great deal"/"a moderate amount") (80%). A majority of respondents also indicated they are already observing health impacts of climate change among their patients; most commonly as increases in chronic disease severity from air pollution (88%), allergic symptoms from exposure to plants or mold (72%), and severe weather injuries (69%). An even larger majority anticipated seeing these climate-related health impacts in the next two decades. Respondents further indicated that physicians and physician organizations should play an active role in educating patients, the public, and policy makers on the human health effects of climate change. International ATS respondents, like their counterparts in the U.S., observed that human health is already adversely affected by climate change, and support responses to address this situation.

  9. 76 FR 12418 - Recruitment Notice for the Taxpayer Advocacy Panel

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-07

    ... for Recruitment of IRS Taxpayer Advocacy Panel (TAP) Members. DATES: March 14, 2011 through April 29... Advocacy Panel (TAP). The mission of the TAP is to listen to taxpayers, identify issues that affect taxpayers, and make suggestions for improving IRS service and customer satisfaction. The TAP serves as an...

  10. 77 FR 13390 - Recruitment Notice for the Taxpayer Advocacy Panel

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-06

    ... for Recruitment of IRS Taxpayer Advocacy Panel (TAP) Members. DATES: March 19, 2012 through April 27... Advocacy Panel (TAP). The mission of the TAP is to listen to taxpayers, identify issues that affect taxpayers, and make suggestions for improving IRS service and customer satisfaction. The TAP serves as an...

  11. 75 FR 9028 - Recruitment Notice for the Taxpayer Advocacy Panel

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-02-26

    ... for Recruitment of IRS Taxpayer Advocacy Panel (TAP) Members. DATES: March 15, 2010 through April 30... Advocacy Panel (TAP). The mission of the TAP is to listen to taxpayers, identify issues that affect taxpayers, and make suggestions for improving IRS service and customer satisfaction. The TAP serves as an...

  12. Brief Report: Do Delinquency and Community Violence Exposure Explain Internalizing Problems in Early Adolescent Gang Members?

    ERIC Educational Resources Information Center

    Madan, Anjana; Mrug, Sylvie; Windle, Michael

    2011-01-01

    Adolescent gang members are at higher risk for internalizing problems as well as exposure to community violence and delinquency. This study examined whether gang membership in early adolescence is associated with internalizing problems (depression, anxiety, and suicidal behavior) and whether these associations are mediated by delinquency and…

  13. Medical Physics Panel Discussion

    NASA Astrophysics Data System (ADS)

    Guèye, Paul; Avery, Steven; Baird, Richard; Soares, Christopher; Amols, Howard; Tripuraneni, Prabhakar; Majewski, Stan; Weisenberger, Drew

    2006-03-01

    The panel discussion will explore opportunities and vistas in medical physics research and practice, medical imaging, teaching medical physics to undergraduates, and medical physics curricula as a recruiting tool for physics departments. Panel members consist of representatives from NSBP (Paul Guèye and Steven Avery), NIH/NIBIB (Richard Baird), NIST (Christopher Soares), AAPM (Howard Amols), ASTRO (Prabhakar Tripuraneni), and Jefferson Lab (Stan Majewski and Drew Weisenberger). Medical Physicists are part of Departments of Radiation Oncology at hospitals and medical centers. The field of medical physics includes radiation therapy physics, medical diagnostic and imaging physics, nuclear medicine physics, and medical radiation safety. It also ranges from basic researcher (at college institutions, industries, and laboratories) to applications in clinical environments.

  14. Genetic Characterization of a Panel of Diverse HIV-1 Isolates at Seven International Sites

    PubMed Central

    Chen, Yue; Sanchez, Ana M.; Sabino, Ester; Hunt, Gillian; Ledwaba, Johanna; Hackett, John; Swanson, Priscilla; Hewlett, Indira; Ragupathy, Viswanath; Vikram Vemula, Sai; Zeng, Peibin; Tee, Kok-Keng; Chow, Wei Zhen; Ji, Hezhao; Sandstrom, Paul; Denny, Thomas N.; Busch, Michael P.; Gao, Feng

    2016-01-01

    HIV-1 subtypes and drug resistance are routinely tested by many international surveillance groups. However, results from different sites often vary. A systematic comparison of results from multiple sites is needed to determine whether a standardized protocol is required for consistent and accurate data analysis. A panel of well-characterized HIV-1 isolates (N = 50) from the External Quality Assurance Program Oversight Laboratory (EQAPOL) was assembled for evaluation at seven international sites. This virus panel included seven subtypes, six circulating recombinant forms (CRFs), nine unique recombinant forms (URFs) and three group O viruses. Seven viruses contained 10 major drug resistance mutations (DRMs). HIV-1 isolates were prepared at a concentration of 107 copies/ml and compiled into blinded panels. Subtypes and DRMs were determined with partial or full pol gene sequences by conventional Sanger sequencing and/or Next Generation Sequencing (NGS). Subtype and DRM results were reported and decoded for comparison with full-length genome sequences generated by EQAPOL. The partial pol gene was amplified by RT-PCR and sequenced for 89.4%-100% of group M viruses at six sites. Subtyping results of majority of the viruses (83%-97.9%) were correctly determined for the partial pol sequences. All 10 major DRMs in seven isolates were detected at these six sites. The complete pol gene sequence was also obtained by NGS at one site. However, this method missed six group M viruses and sequences contained host chromosome fragments. Three group O viruses were only characterized with additional group O-specific RT-PCR primers employed by one site. These results indicate that PCR protocols and subtyping tools should be standardized to efficiently amplify diverse viruses and more consistently assign virus genotypes, which is critical for accurate global subtype and drug resistance surveillance. Targeted NGS analysis of partial pol sequences can serve as an alternative approach

  15. Genetic Characterization of a Panel of Diverse HIV-1 Isolates at Seven International Sites.

    PubMed

    Hora, Bhavna; Keating, Sheila M; Chen, Yue; Sanchez, Ana M; Sabino, Ester; Hunt, Gillian; Ledwaba, Johanna; Hackett, John; Swanson, Priscilla; Hewlett, Indira; Ragupathy, Viswanath; Vikram Vemula, Sai; Zeng, Peibin; Tee, Kok-Keng; Chow, Wei Zhen; Ji, Hezhao; Sandstrom, Paul; Denny, Thomas N; Busch, Michael P; Gao, Feng

    2016-01-01

    HIV-1 subtypes and drug resistance are routinely tested by many international surveillance groups. However, results from different sites often vary. A systematic comparison of results from multiple sites is needed to determine whether a standardized protocol is required for consistent and accurate data analysis. A panel of well-characterized HIV-1 isolates (N = 50) from the External Quality Assurance Program Oversight Laboratory (EQAPOL) was assembled for evaluation at seven international sites. This virus panel included seven subtypes, six circulating recombinant forms (CRFs), nine unique recombinant forms (URFs) and three group O viruses. Seven viruses contained 10 major drug resistance mutations (DRMs). HIV-1 isolates were prepared at a concentration of 107 copies/ml and compiled into blinded panels. Subtypes and DRMs were determined with partial or full pol gene sequences by conventional Sanger sequencing and/or Next Generation Sequencing (NGS). Subtype and DRM results were reported and decoded for comparison with full-length genome sequences generated by EQAPOL. The partial pol gene was amplified by RT-PCR and sequenced for 89.4%-100% of group M viruses at six sites. Subtyping results of majority of the viruses (83%-97.9%) were correctly determined for the partial pol sequences. All 10 major DRMs in seven isolates were detected at these six sites. The complete pol gene sequence was also obtained by NGS at one site. However, this method missed six group M viruses and sequences contained host chromosome fragments. Three group O viruses were only characterized with additional group O-specific RT-PCR primers employed by one site. These results indicate that PCR protocols and subtyping tools should be standardized to efficiently amplify diverse viruses and more consistently assign virus genotypes, which is critical for accurate global subtype and drug resistance surveillance. Targeted NGS analysis of partial pol sequences can serve as an alternative approach

  16. Mount assembly for porous transition panel at annular combustor outlet

    NASA Technical Reports Server (NTRS)

    Sweeney, Ralph B. (Inventor); Verdouw, Albert J. (Inventor)

    1980-01-01

    A gas turbine engine combustor assembly of annular configuration has outer and inner walls made up of a plurality of axially extending multi-layered porous metal panels joined together at butt joints therebetween and each outer and inner wall including a transition panel of porous metal defining a combustor assembly outlet supported by a combustor mount assembly including a stiffener ring having a side undercut thereon fit over a transition panel end face; and wherein an annular weld joins the ring to the end face to transmit exhaust heat from the end face to the stiffener ring for dissipation from the combustor; a combustor pilot member is located in axially spaced, surrounding relationship to the end face and connector means support the stiffener ring in free floating relationship with the pilot member to compensate for both radial and axial thermal expansion of the transition panel; and said connector means includes a radial gap for maintaining a controlled flow of coolant from outside of the transition panel into cooling relationship with the stiffener ring and said weld to further cool the end face against excessive heat build-up therein during flow of hot gas exhaust through said outlet.

  17. Alternative Shear Panel Configurations for Light Wood Construction. Development, Seismic Performance, and Design Guidance

    NASA Astrophysics Data System (ADS)

    Wilcoski, James; Fischer, Chad; Allison, Tim; Malach, Kelly Jo

    2002-04-01

    Shear panels are used in light wood construction to resist lateral loads resulting from earthquakes or strong winds. These panels are typically made of wooden sheathing nailed to building frame members, but this standard panel design interferes with the installation of sheet insulation. A non-insulated shear panel conducts heat between the building interior and exterior wasting considerable amounts of energy. Several alternative shear panel designs were developed to avoid this insulation-mounting problem and sample panels were tested according to standard cyclic test protocols. One of the alternative designs consisted of diagonal steel straps nailed directly to the structural framing. Several others consisted of sheathing nailed to 2 x 4 framing then set into a larger 2 x 6 structural frame in such a way that no sheathing protruded beyond the edge of the 2 x 6 members. Also samples of industry-standard shear panels were constructed and tested in order to establish a performance baseline. Analytical models were developed to size test panels and predict panel behavior. A procedure was developed for establishing design capacities based on both test data and established baseline panel design capacity. The behavior of each panel configuration is documented and recommended design capacities are presented.

  18. The COSMIN checklist for assessing the methodological quality of studies on measurement properties of health status measurement instruments: an international Delphi study.

    PubMed

    Mokkink, Lidwine B; Terwee, Caroline B; Patrick, Donald L; Alonso, Jordi; Stratford, Paul W; Knol, Dirk L; Bouter, Lex M; de Vet, Henrica C W

    2010-05-01

    Aim of the COSMIN study (COnsensus-based Standards for the selection of health status Measurement INstruments) was to develop a consensus-based checklist to evaluate the methodological quality of studies on measurement properties. We present the COSMIN checklist and the agreement of the panel on the items of the checklist. A four-round Delphi study was performed with international experts (psychologists, epidemiologists, statisticians and clinicians). Of the 91 invited experts, 57 agreed to participate (63%). Panel members were asked to rate their (dis)agreement with each proposal on a five-point scale. Consensus was considered to be reached when at least 67% of the panel members indicated 'agree' or 'strongly agree'. Consensus was reached on the inclusion of the following measurement properties: internal consistency, reliability, measurement error, content validity (including face validity), construct validity (including structural validity, hypotheses testing and cross-cultural validity), criterion validity, responsiveness, and interpretability. The latter was not considered a measurement property. The panel also reached consensus on how these properties should be assessed. The resulting COSMIN checklist could be useful when selecting a measurement instrument, peer-reviewing a manuscript, designing or reporting a study on measurement properties, or for educational purposes.

  19. Citizen Review Panels for Child Protective Services: A National Profile

    ERIC Educational Resources Information Center

    Jones, Blake L.; Royse, David

    2008-01-01

    Citizen Review Panels (CRPs) for Child Protective Services are groups of citizen-volunteers throughout the United States who are federally mandated to evaluate local and state child protection systems. This study presents a profile of 332 CRP members in 20 states with regards to their demographic information, length of time on the panel, and …

  20. Technical Evaluation Report on the Flight Mechanics Panel Symposium on the Flight Mechanics Panel Symposium on Space Vehicle Flight Mechanics (La Mecanique du Vol des Vehicules Spatiaux)

    DTIC Science & Technology

    1990-11-01

    control and including final recovery for a wide range of space vehicles from tethered satellite systems and flexible space structures to the space plane...flight mechanics, members from the Fluid Dynamics Panel, the Guidance and Control Panel, the Propulsion and Energetics Panel and the Structures and... Structures and Materials which should be overcome for a successful realization of a human Space Transportation System in the 21st century. He

  1. 75 FR 11999 - Open Meeting of the Taxpayer Advocacy Panel Joint Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-12

    ... Panel is soliciting public comment, ideas, and suggestions on improving customer service at the Internal... DEPARTMENT OF THE TREASURY Internal Revenue Service Open Meeting of the Taxpayer Advocacy Panel Joint Committee AGENCY: Internal Revenue Service (IRS) Treasury. ACTION: Notice of Meeting. SUMMARY: An...

  2. 75 FR 68403 - Open meeting of the Taxpayer Advocacy Panel

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-11-05

    ... DEPARTMENT OF THE TREASURY Internal Revenue Service Open meeting of the Taxpayer Advocacy Panel AGENCY: Internal Revenue Service (IRS) Treasury. ACTION: Notice of meeting. SUMMARY: An open meeting of....C. App. (1988) that an open meeting of the Taxpayer Advocacy Panel will be held Tuesday, December 7...

  3. Treatment Guidelines for Preoperative Radiation Therapy for Retroperitoneal Sarcoma: Preliminary Consensus of an International Expert Panel

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Baldini, Elizabeth H., E-mail: ebaldini@partners.org; Wang, Dian; Haas, Rick L.M.

    Purpose: Evidence for external beam radiation therapy (RT) as part of treatment for retroperitoneal sarcoma (RPS) is limited. Preoperative RT is the subject of a current randomized trial, but the results will not be available for many years. In the meantime, many practitioners use preoperative RT for RPS, and although this approach is used in practice, there are no radiation treatment guidelines. An international expert panel was convened to develop consensus treatment guidelines for preoperative RT for RPS. Methods and Materials: An expert panel of 15 academic radiation oncologists who specialize in the treatment of sarcoma was assembled. A systematicmore » review of reports related to RT for RPS, RT for extremity sarcoma, and RT-related toxicities for organs at risk was performed. Due to the paucity of high-quality published data on the subject of RT for RPS, consensus recommendations were based largely on expert opinion derived from clinical experience and extrapolation of relevant published reports. It is intended that these clinical practice guidelines be updated as pertinent data become available. Results: Treatment guidelines for preoperative RT for RPS are presented. Conclusions: An international panel of radiation oncologists who specialize in sarcoma reached consensus guidelines for preoperative RT for RPS. Many of the recommendations are based on expert opinion because of the absence of higher level evidence and, thus, are best regarded as preliminary. We emphasize that the role of preoperative RT for RPS has not been proven, and we await data from the European Organization for Research and Treatment of Cancer (EORTC) study of preoperative radiotherapy plus surgery versus surgery alone for patients with RPS. Further data are also anticipated pertaining to normal tissue dose constraints, particularly for bowel tolerance. Nonetheless, as we await these data, the guidelines herein can be used to establish treatment uniformity to aid future assessments of

  4. Outbrief - Long Life Rocket Engine Panel

    NASA Technical Reports Server (NTRS)

    Quinn, Jason Eugene

    2004-01-01

    This white paper is an overview of the JANNAF Long Life Rocket Engine (LLRE) Panel results from the last several years of activity. The LLRE Panel has met over the last several years in order to develop an approach for the development of long life rocket engines. Membership for this panel was drawn from a diverse set of the groups currently working on rocket engines (Le. government labs, both large and small companies and university members). The LLRE Panel was formed in order to determine the best way to enable the design of rocket engine systems that have life capability greater than 500 cycles while meeting or exceeding current performance levels (Specific Impulse and Thrust/Weight) with a 1/1,OOO,OOO likelihood of vehicle loss due to rocket system failure. After several meetings and much independent work the panel reached a consensus opinion that the primary issues preventing LLRE are a lack of: physics based life prediction, combined loads prediction, understanding of material microphysics, cost effective system level testing. and the inclusion of fabrication process effects into physics based models. With the expected level of funding devoted to LLRE development, the panel recommended that fundamental research efforts focused on these five areas be emphasized.

  5. Panel to review EOSDIS plans

    NASA Technical Reports Server (NTRS)

    1994-01-01

    Formed in Jan. 1992, the Panel to Review EOSDIS Plans was charged with advising NASA on its plans for developing the Earth Observing System (EOS) Data and Information System (EOSDIS). Specifically, the panel was asked to do the following: assess the validity of the engineering and technical underpinnings of the EOSDIS; assess its potential value to scientific users; suggest how technical risk can be minimized; and assess whether current plans are sufficiently resilient to be adaptable to changing technology and requirements such as budget environments, data volumes, new users, and new databases. The panel completed an interim report (Addendum A) and transmitted it to NASA and other interested parties in the government on 9 Apr. 1992. Because of a delay in NASA's plans to select the contractor for EOSDIS, the panel was not able to complete its review of the program according to the original government request. With the issuance of a letter report (Addendum B) on 28 Sep. 1992, the panel became inactive until such time as NASA could release the details of the contractor's proposed architecture, schedule, and costs for developing EOSDIS. In early 1993, NASA awarded the contract for the EOSDIS Core System (ECS). On 20 Apr. 1993, NASA asked the panel to reconvene to do the following: ( 1) complete its review of NASA's approach to the EOSDIS architecture and implementation; (2) appraise NASA's responses to the panel's previous recommendations; and (3) review the planning for EOSDIS in the context of NASA's role in the Global Change Data and Information System (GCDIS) implementation plan. To respond to the NASA charge, the panel met three times in 1993 including sessions with NASA officials and the EOSDIS contractor. In addition, several of the panel members visited individual Distributed Active Archive Centers (DAAC's) to obtain additional views of EOSDIS. The panel has now obtained substantial information on the EOSDIS budget, contractor work program, and current

  6. Panel discussions: Industrial support sector requirements

    NASA Technical Reports Server (NTRS)

    Washom, B.

    1982-01-01

    Industrial support was the subject of a panel discussion on solar energy technology. Members of various energy-related businesses and agencies were present. Topics cofered include: (1) solar collectors; (2) solar energy policy; (3) government/industry relations; and (4) economic factors which influence the use of solar energy.

  7. ASAP members view LVSA and Orion Stage Adapter

    NASA Image and Video Library

    2018-03-12

    ASAP, (Aerospace Safety Advisory Panel), members, Dr. Sandra Magnus, Dr. Donald P. McErlean, Dr. George Nield, Captain Christopher Saindon, Mr. David West, Dr. Patricia Sanders, Ms. Carol Hamilton, Ms. Evette Whatley, Ms. Paula Frankel, view LVSA, (Launch Vehicle Stage Adapter), and Orion Stage Adapter. Members were escorted to buildings 4707 and 4708 by Andrew Schorr, Deputy Manager for Spacecraft/Payload Integration & Evolution Office (SPIE)

  8. 21 CFR 516.141 - Qualified expert panels.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... its consideration. Such information should be submitted directly to the Director, OMUMS, when notified... an officer, director, trustee, general partner or employee: (i) Is currently receiving or seeking... potential qualified expert panel member must submit to the Director, OMUMS, the following information...

  9. Predicting the vibroacoustic response of satellite equipment panels.

    PubMed

    Conlon, S C; Hambric, S A

    2003-03-01

    Modern satellites are constructed of large, lightweight equipment panels that are strongly excited by acoustic pressures during launch. During design, performing vibroacoustic analyses to evaluate and ensure the integrity of the complex electronics mounted on the panels is critical. In this study the attached equipment is explicitly addressed and how its properties affect the panel responses is characterized. FEA and BEA methods are used to derive realistic parameters to input to a SEA hybrid model of a panel with multiple attachments. Specifically, conductance/modal density and radiation efficiency for nonhomogeneous panel structures with and without mass loading are computed. The validity of using the spatially averaged conductance of panels with irregular features for deriving the structure modal density is demonstrated. Maidanik's proposed method of modifying the traditional SEA input power is implemented, illustrating the importance of accounting for system internal couplings when calculating the external input power. The predictions using the SEA hybrid model agree with the measured data trends, and are found to be most sensitive to the assumed dynamic mass ratio (attachments/structure) and the attachment internal loss factor. Additional experimental and analytical investigations are recommended to better characterize dynamic masses, modal densities and loss factors.

  10. Working Papers: Astronomy and Astrophysics Panel Reports

    NASA Technical Reports Server (NTRS)

    Bahcall, John N.; Beichman, Charles A.; Canizares, Claude; Cronin, James; Heeschen, David; Houck, James; Hunten, Donald; Mckee, Christopher F.; Noyes, Robert; Ostriker, Jeremiah P.

    1991-01-01

    The papers of the panels appointed by the Astronomy and Astrophysics survey Committee are compiled. These papers were advisory to the survey committee and represent the opinions of the members of each panel in the context of their individual charges. The following subject areas are covered: radio astronomy, infrared astronomy, optical/IR from ground, UV-optical from space, interferometry, high energy from space, particle astrophysics, theory and laboratory astrophysics, solar astronomy, planetary astronomy, computing and data processing, policy opportunities, benefits to the nation from astronomy and astrophysics, status of the profession, and science opportunities.

  11. Expanding Disease Definitions in Guidelines and Expert Panel Ties to Industry: A Cross-sectional Study of Common Conditions in the United States

    PubMed Central

    Moynihan, Raymond N.; Cooke, Georga P. E.; Doust, Jenny A.; Bero, Lisa; Hill, Suzanne; Glasziou, Paul P.

    2013-01-01

    Background Financial ties between health professionals and industry may unduly influence professional judgments and some researchers have suggested that widening disease definitions may be one driver of over-diagnosis, bringing potentially unnecessary labeling and harm. We aimed to identify guidelines in which disease definitions were changed, to assess whether any proposed changes would increase the numbers of individuals considered to have the disease, whether potential harms of expanding disease definitions were investigated, and the extent of members' industry ties. Methods and Findings We undertook a cross-sectional study of the most recent publication between 2000 and 2013 from national and international guideline panels making decisions about definitions or diagnostic criteria for common conditions in the United States. We assessed whether proposed changes widened or narrowed disease definitions, rationales offered, mention of potential harms of those changes, and the nature and extent of disclosed ties between members and pharmaceutical or device companies. Of 16 publications on 14 common conditions, ten proposed changes widening and one narrowing definitions. For five, impact was unclear. Widening fell into three categories: creating “pre-disease”; lowering diagnostic thresholds; and proposing earlier or different diagnostic methods. Rationales included standardising diagnostic criteria and new evidence about risks for people previously considered to not have the disease. No publication included rigorous assessment of potential harms of proposed changes. Among 14 panels with disclosures, the average proportion of members with industry ties was 75%. Twelve were chaired by people with ties. For members with ties, the median number of companies to which they had ties was seven. Companies with ties to the highest proportions of members were active in the relevant therapeutic area. Limitations arise from reliance on only disclosed ties, and exclusion of

  12. Implementation of a novel population panel management curriculum among interprofessional health care trainees.

    PubMed

    Kaminetzky, Catherine P; Beste, Lauren A; Poppe, Anne P; Doan, Daniel B; Mun, Howard K; Woods, Nancy Fugate; Wipf, Joyce E

    2017-12-22

    Gaps in chronic disease management have led to calls for novel methods of interprofessional, team-based care. Population panel management (PPM), the process of continuous quality improvement across groups of patients, is rarely included in health professions training for physicians, nurses, or pharmacists. The feasibility and acceptance of such training across different healthcare professions is unknown. We developed and implemented a novel, interprofessional PPM curriculum targeted to diverse health professions trainees. The curriculum was implemented annually among internal medicine residents, nurse practitioner students and residents, and pharmacy residents co-located in a large, academic primary care site. Small groups of interprofessional trainees participated in supervised quarterly seminars focusing on chronic disease management (e.g., diabetes mellitus, hypertension, or chronic obstructive pulmonary disease) or processes of care (e.g., emergency department utilization for nonacute conditions or chronic opioid management). Following brief didactic presentations, trainees self-assessed their clinic performance using patient-level chart review, presented individual cases to interprofessional staff and faculty, and implemented subsequent feedback with their clinic team. We report data from 2011 to 2015. Program evaluation included post-session participant surveys regarding attitudes, knowledge and confidence towards PPM, ability to identify patients for referral to interprofessional team members, and major learning points from the session. Directed content analysis was performed on an open-ended survey question. Trainees (n = 168) completed 122 evaluation assessments. Trainees overwhelmingly reported increased confidence in using PPM and increased knowledge about managing their patient panel. Trainees reported improved ability to identify patients who would benefit from multidisciplinary care or referral to another team member. Directed content analysis

  13. CAPP Panel Discussion: The Future of Astronomy & Astrophysics at NASA

    NASA Astrophysics Data System (ADS)

    Burns, Jack O.

    2006-12-01

    The president's proposed budget for FY2007 for NASA sets out significant reductions in the growth for space science funding, as well as reductions to previously planned Explorer and Flagship missions. With this proposed budget and recent changes in NASA's Advisory structure, this is a good time to assess the state of astronomy and astrophysics at NASA. The AAS Committee on Astronomy & Public Policy has assembled a distinguished panel to discuss the FY2007 budget and what it implies for the future. Panel Members: Dr. Jack Schmitt, Chair of NAC (confirmed). Dr. Anneila Sargent, Cal Tech, chair of NRC Board of Physics and Astronomy (confirmed). Dr. Neil deGrasse Tyson, American Museum of Natural History, member of NAC. Dr. Garth Illingworth, University of California at Santa Cruz, Chair of AAAC (confirmed) Dr. Len Fisk, University of Michigan, Chair of SSB and ex-officio member of NAC (confirmed).

  14. 76 FR 37197 - Open Meeting of the Taxpayer Advocacy Panel Joint Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-24

    ... Panel is soliciting public comments, ideas, and suggestions on improving customer service at the... DEPARTMENT OF THE TREASURY Internal Revenue Service Open Meeting of the Taxpayer Advocacy Panel Joint Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of meeting. SUMMARY: An...

  15. 78 FR 15126 - Open Meeting of the Taxpayer Advocacy Panel Joint Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-08

    ... Panel is soliciting public comments, ideas, and suggestions on improving customer service at the... DEPARTMENT OF THE TREASURY Internal Revenue Service Open Meeting of the Taxpayer Advocacy Panel Joint Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of meeting. SUMMARY: An...

  16. 77 FR 61054 - Open Meeting of the Taxpayer Advocacy Panel Joint Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-05

    ... Panel is soliciting public comments, ideas, and suggestions on improving customer service at the... DEPARTMENT OF THE TREASURY Internal Revenue Service Open Meeting of the Taxpayer Advocacy Panel Joint Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of meeting. SUMMARY: An...

  17. 77 FR 21156 - Open Meeting of the Taxpayer Advocacy Panel Joint Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-09

    ... Panel is soliciting public comments, ideas, and suggestions on improving customer service at the... DEPARTMENT OF THE TREASURY Internal Revenue Service Open Meeting of the Taxpayer Advocacy Panel Joint Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of meeting. SUMMARY: An...

  18. 77 FR 8327 - Open Meeting of the Taxpayer Advocacy Panel Joint Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-14

    ... Panel is soliciting public comments, ideas, and suggestions on improving customer service at the... DEPARTMENT OF THE TREASURY Internal Revenue Service Open Meeting of the Taxpayer Advocacy Panel Joint Committee AGENCY: Internal Revenue Service (IRS) Treasury. ACTION: Notice of meeting. SUMMARY: An...

  19. 77 FR 5313 - Open Meeting of the Taxpayer Advocacy Panel Joint Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-02

    ... Panel is soliciting public comments, ideas, and suggestions on improving customer service at the... DEPARTMENT OF THE TREASURY Internal Revenue Service Open Meeting of the Taxpayer Advocacy Panel Joint Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of meeting. SUMMARY: An...

  20. 78 FR 11277 - Open Meeting of the Taxpayer Advocacy Panel Joint Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-15

    ... Panel is soliciting public comments, ideas, and suggestions on improving customer service at the... DEPARTMENT OF THE TREASURY Internal Revenue Service Open Meeting of the Taxpayer Advocacy Panel Joint Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of Meeting. SUMMARY: An...

  1. 77 FR 20488 - Open Meeting of the Taxpayer Advocacy Panel Joint Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-04

    ... Panel is soliciting public comments, ideas, and suggestions on improving customer service at the... DEPARTMENT OF THE TREASURY Internal Revenue Service Open Meeting of the Taxpayer Advocacy Panel Joint Committee AGENCY: Internal Revenue Service (IRS) Treasury. ACTION: Notice of meeting. SUMMARY: An...

  2. 76 FR 6190 - Open Meeting of the Taxpayer Advocacy Panel Joint Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-03

    ... Panel is soliciting public comments, ideas, and suggestions on improving customer service at the... DEPARTMENT OF THE TREASURY Internal Revenue Service Open Meeting of the Taxpayer Advocacy Panel Joint Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of meeting. SUMMARY: An...

  3. Surviving Sepsis Campaign: International Guidelines for Management of Sepsis and Septic Shock: 2016.

    PubMed

    Rhodes, Andrew; Evans, Laura E; Alhazzani, Waleed; Levy, Mitchell M; Antonelli, Massimo; Ferrer, Ricard; Kumar, Anand; Sevransky, Jonathan E; Sprung, Charles L; Nunnally, Mark E; Rochwerg, Bram; Rubenfeld, Gordon D; Angus, Derek C; Annane, Djillali; Beale, Richard J; Bellinghan, Geoffrey J; Bernard, Gordon R; Chiche, Jean-Daniel; Coopersmith, Craig; De Backer, Daniel P; French, Craig J; Fujishima, Seitaro; Gerlach, Herwig; Hidalgo, Jorge Luis; Hollenberg, Steven M; Jones, Alan E; Karnad, Dilip R; Kleinpell, Ruth M; Koh, Younsuk; Lisboa, Thiago Costa; Machado, Flavia R; Marini, John J; Marshall, John C; Mazuski, John E; McIntyre, Lauralyn A; McLean, Anthony S; Mehta, Sangeeta; Moreno, Rui P; Myburgh, John; Navalesi, Paolo; Nishida, Osamu; Osborn, Tiffany M; Perner, Anders; Plunkett, Colleen M; Ranieri, Marco; Schorr, Christa A; Seckel, Maureen A; Seymour, Christopher W; Shieh, Lisa; Shukri, Khalid A; Simpson, Steven Q; Singer, Mervyn; Thompson, B Taylor; Townsend, Sean R; Van der Poll, Thomas; Vincent, Jean-Louis; Wiersinga, W Joost; Zimmerman, Janice L; Dellinger, R Phillip

    2017-03-01

    To provide an update to "Surviving Sepsis Campaign Guidelines for Management of Sepsis and Septic Shock: 2012". A consensus committee of 55 international experts representing 25 international organizations was convened. Nominal groups were assembled at key international meetings (for those committee members attending the conference). A formal conflict-of-interest (COI) policy was developed at the onset of the process and enforced throughout. A stand-alone meeting was held for all panel members in December 2015. Teleconferences and electronic-based discussion among subgroups and among the entire committee served as an integral part of the development. The panel consisted of five sections: hemodynamics, infection, adjunctive therapies, metabolic, and ventilation. Population, intervention, comparison, and outcomes (PICO) questions were reviewed and updated as needed, and evidence profiles were generated. Each subgroup generated a list of questions, searched for best available evidence, and then followed the principles of the Grading of Recommendations Assessment, Development, and Evaluation (GRADE) system to assess the quality of evidence from high to very low, and to formulate recommendations as strong or weak, or best practice statement when applicable. The Surviving Sepsis Guideline panel provided 93 statements on early management and resuscitation of patients with sepsis or septic shock. Overall, 32 were strong recommendations, 39 were weak recommendations, and 18 were best-practice statements. No recommendation was provided for four questions. Substantial agreement exists among a large cohort of international experts regarding many strong recommendations for the best care of patients with sepsis. Although a significant number of aspects of care have relatively weak support, evidence-based recommendations regarding the acute management of sepsis and septic shock are the foundation of improved outcomes for these critically ill patients with high mortality.

  4. Surviving Sepsis Campaign: International Guidelines for Management of Sepsis and Septic Shock: 2016.

    PubMed

    Rhodes, Andrew; Evans, Laura E; Alhazzani, Waleed; Levy, Mitchell M; Antonelli, Massimo; Ferrer, Ricard; Kumar, Anand; Sevransky, Jonathan E; Sprung, Charles L; Nunnally, Mark E; Rochwerg, Bram; Rubenfeld, Gordon D; Angus, Derek C; Annane, Djillali; Beale, Richard J; Bellinghan, Geoffrey J; Bernard, Gordon R; Chiche, Jean-Daniel; Coopersmith, Craig; De Backer, Daniel P; French, Craig J; Fujishima, Seitaro; Gerlach, Herwig; Hidalgo, Jorge Luis; Hollenberg, Steven M; Jones, Alan E; Karnad, Dilip R; Kleinpell, Ruth M; Koh, Younsuck; Lisboa, Thiago Costa; Machado, Flavia R; Marini, John J; Marshall, John C; Mazuski, John E; McIntyre, Lauralyn A; McLean, Anthony S; Mehta, Sangeeta; Moreno, Rui P; Myburgh, John; Navalesi, Paolo; Nishida, Osamu; Osborn, Tiffany M; Perner, Anders; Plunkett, Colleen M; Ranieri, Marco; Schorr, Christa A; Seckel, Maureen A; Seymour, Christopher W; Shieh, Lisa; Shukri, Khalid A; Simpson, Steven Q; Singer, Mervyn; Thompson, B Taylor; Townsend, Sean R; Van der Poll, Thomas; Vincent, Jean-Louis; Wiersinga, W Joost; Zimmerman, Janice L; Dellinger, R Phillip

    2017-03-01

    To provide an update to "Surviving Sepsis Campaign Guidelines for Management of Sepsis and Septic Shock: 2012." A consensus committee of 55 international experts representing 25 international organizations was convened. Nominal groups were assembled at key international meetings (for those committee members attending the conference). A formal conflict-of-interest (COI) policy was developed at the onset of the process and enforced throughout. A stand-alone meeting was held for all panel members in December 2015. Teleconferences and electronic-based discussion among subgroups and among the entire committee served as an integral part of the development. The panel consisted of five sections: hemodynamics, infection, adjunctive therapies, metabolic, and ventilation. Population, intervention, comparison, and outcomes (PICO) questions were reviewed and updated as needed, and evidence profiles were generated. Each subgroup generated a list of questions, searched for best available evidence, and then followed the principles of the Grading of Recommendations Assessment, Development, and Evaluation (GRADE) system to assess the quality of evidence from high to very low, and to formulate recommendations as strong or weak, or best practice statement when applicable. The Surviving Sepsis Guideline panel provided 93 statements on early management and resuscitation of patients with sepsis or septic shock. Overall, 32 were strong recommendations, 39 were weak recommendations, and 18 were best-practice statements. No recommendation was provided for four questions. Substantial agreement exists among a large cohort of international experts regarding many strong recommendations for the best care of patients with sepsis. Although a significant number of aspects of care have relatively weak support, evidence-based recommendations regarding the acute management of sepsis and septic shock are the foundation of improved outcomes for these critically ill patients with high mortality.

  5. Stepped inlet optical panel

    DOEpatents

    Veligdan, James T.

    2001-01-01

    An optical panel includes stacked optical waveguides having stepped inlet facets collectively defining an inlet face for receiving image light, and having beveled outlet faces collectively defining a display screen for displaying the image light channeled through the waveguides by internal reflection.

  6. Solar array panels seen from JPM window

    NASA Image and Video Library

    2008-06-10

    S124-E-008618 (10 June 2008) --- A partial view of International Space Station solar panels and Earth's atmosphere are photographed by a STS-124 crewmember on the International Space Station while Space Shuttle Discovery is docked with the station.

  7. EPA Announces FIFRA Science Advisory Panel Meeting on PBPK and Asks for Nominations for Panel Members

    EPA Pesticide Factsheets

    On June 6, 2017, the EPA published a Federal Register Notice (EPA-HQ-OPP-2017-0180) for both the meeting and seeking nominees to serve as ad hoc expert members of the FIFRA SAP on physiologically based pharmacokinetic (PBPK) modeling.

  8. Summary of the SWOT panel's evaluation of the organisation and financing of the Danish health care system.

    PubMed

    Christiansen, Terkel

    2002-02-01

    The organisation and financing of the Danish health care system was evaluated within a framework of a SWOT analysis (analysis of strengths, weaknesses, opportunities and threats) by a panel of five members with a background in health economics. This paper systematically summarises the panel's assessments, within the framework of the triangular model of health care. The members of the panel are in agreement on a number of aspects, while their views on other aspects differ. In general they find many strength in the way the system is organised and financed more so in the primary sector than in the hospital sector.

  9. Sentinel node biopsy for prostate cancer: report from a consensus panel meeting.

    PubMed

    van der Poel, Henk G; Wit, Esther M; Acar, Cenk; van den Berg, Nynke S; van Leeuwen, Fijs W B; Valdes Olmos, Renato A; Winter, Alexander; Wawroschek, Friedhelm; Liedberg, Fredrik; Maclennan, Steven; Lam, Thomas

    2017-08-01

    To explore the evidence and knowledge gaps in sentinel node biopsy (SNB) in prostate cancer through a consensus panel of experts. A two-round Delphi survey among experts was followed by a consensus panel meeting of 16 experts in February 2016. Agreement voting was performed using the research and development project/University of California, Los Angeles Appropriateness Methodology on 150 statements in nine domains. The disagreement index based on the interpercentile range, adjusted for symmetry score, was used to assess consensus and non-consensus among panel members. Consensus was obtained on 91 of 150 statements (61%). The main outcomes were: (1) the results from an extended lymph node dissection (eLND) are still considered the 'gold standard', and sentinel node (SN) detection should be combined with eLND, at least in patients with intermediate- and high-risk prostate cancer; (2) the role of SN detection in low-risk prostate cancer is unclear; and (3) future studies should contain oncological endpoints as number of positive nodes outside the eLND template, false-negative and false-positive SN procedures, and recurrence-free survival. A high rate of consensus was obtained regarding outcome measures of future clinical trials on SNB (89%). Consensus on tracer technology was only obtained in 47% of statements, reflecting a need for further research and standardization in this area. The low-level evidence in the available literature and the composition of mainly SNB users in the panel constitute the major limitations of the study. Consensus on a majority of elementary statements on SN detection in prostate cancer was obtained.; therefore, the results from this consensus report will provide a basis for the design of further studies in the field. A group of experts identified evidence and knowledge gaps on SN detection in prostate cancer and its application in daily practice. Information from the consensus statements can be used to direct further studies. © 2017 The

  10. Skin, Stringer, and Fastener Loads in Buckled Fuselage Panels

    NASA Technical Reports Server (NTRS)

    Young, Richard D.; Rose, Cheryl A.; Starnes, James H., Jr.

    2001-01-01

    The results of a numerical study to assess the effect of skin buckling on the internal load distribution in a stiffened fuselage panel, with and without longitudinal cracks, are presented. In addition, the impact of changes in the internal loads on the fatigue life and residual strength of a fuselage panel is assessed. A generic narrow-body fuselage panel is considered. The entire panel is modeled using shell elements and considerable detail is included to represent the geometric-nonlinear response of the buckled skin, cross section deformation of the stiffening components, and details of the skin-string attachment with discrete fasteners. Results are presented for a fixed internal pressure and various combinations of axial tension or compression loads. Results illustrating the effect of skin buckling on the stress distribution in the skin and stringer, and fastener loads are presented. Results are presented for the pristine structure, and for cases where damage is introduced in the form of a longitudinal crack adjacent to the stringer, or failed fastener elements. The results indicate that axial compression loads and skin buckling can have a significant effect on the circumferential stress in the skin, and fastener loads, which will influence damage initiation, and a comparable effect on stress intensity factors for cases with cracks. The effects on stress intensity factors will influence damage propagation rates and the residual strength of the panel.

  11. International Science Policy. A Compilation of Papers Prepared for the 12th Meeting of the Panel on Science and Technology.

    ERIC Educational Resources Information Center

    Congress of the U.S., Washington, DC. House Committee on Science and Technology.

    The papers included in this compilation were presented at the 1971 meeting of the Panel on Science and Technology of the U. S. House of Representatives Committee on Science and Astronautics, and concern various aspects of international science policy. The papers include an address by the Secretary of State on "U. S. Foreign Policy in a…

  12. International Expert Panel Consensus Guidelines for Structure and Delivery of Qigong Exercise for Cancer Care Programming

    PubMed Central

    Klein, Penelope; Picard, George; Schneider, Roger; Oh, Byeongsang

    2017-01-01

    Integrative oncology, including Qigong, is a relatively new concept in modern healthcare. Evidence of benefits of Qigong in cancer survivors is emerging. As such, several cancer centers, world-wide, have introduced Qigong as part of integrative medicine within supportive cancer care programming. Qigong exercise programming content and quality varies among institutions due to lack of standard guidelines and, at present, relies solely on the instructor’s skills, knowledge, personal preferences and clinical experience. Development of consensus guidelines recommending the basic structure and delivery of Qigong programming in cancer care can potentiate quality assurance and reduce risk of harm. This applied qualitative research utilized a modified Delphi approach to formulate consensus guidelines. Guidelines were developed through discussions among an international expert panel (N = 13) with representation from Australia, Canada, Ireland, and the United States. Panel communication was predominantly conducted by email and occurred from November 2016 through February 2017. Expert panel work resulted in the generation of a work product: Qigong in Cancer Care Guidelines: A Working Paper including: (a) Consensus Guidelines for structure and delivery of Qigong exercise for Cancer care programming; (b) Consensus guidelines for instructor competence for teaching Qigong exercise for cancer care classes; (c) Screening tool for safe participation in Qigong exercise; (d) Class participant instructions for maintaining safety during Qigong exercise; and (e) Advice from the field. Generation of these resources is the first step in establishing recommendations for ‘best practice’ in the area of Qigong for cancer care programming.

  13. Visual Impairment/Intracranial Pressure Research Clinical Advisory Panel (RCAP) Meeting. [Summary Report

    NASA Technical Reports Server (NTRS)

    Villarreal, Jennifer

    2014-01-01

    The Visual Impairment/Intracranial Pressure (VIIP) Research and Clinical Advisory Panel convened on December 1, 2014 at the ISS Conference Facility in Houston. The panel members were provided updates to the current clinical cases and treatment plans along with the latest research activities (http://humanresearchroadmap.nasa.gov/Risks/?i=105) and preliminary study results. The following is a summary of this meeting.

  14. The role of appearance schematicity in the internalization of media appearance ideals: A panel study of preadolescents.

    PubMed

    Rousseau, Ann; Gamble, Hilary; Eggermont, Steven

    2017-10-01

    Individuals who are more strongly invested in their appearance, appearance schematics, have a tendency to engage in appearance-related comparison. Appearance schematicity consists of two components. The self-evaluative component concerns the degree to which appearance is central to self-worth, referred to as dysfunctional appearance beliefs. Motivational salience refers to the engagement in behaviors designed to enhance appearance, such as body surveillance. Based on a three-wave panel survey of 973 Flemish preadolescents (M age  = 11.15, SD = 1.13) we found that the motivational and self-evaluative components had a different impact on media internalization. For preadolescents who engaged in more body surveillance, watching television resulted in more media internalization. For preadolescents who had fewer dysfunctional appearance beliefs, watching television resulted in more media internalization. These findings suggest that appearance schematicity is an important susceptibility variable in the relationship between TV-exposure and media internalization, and emphasize the importance of investigating individual dispositions beyond gender differences. Copyright © 2017 The Foundation for Professionals in Services for Adolescents. Published by Elsevier Ltd. All rights reserved.

  15. Environmental Performance of North American Wood Panel Manufacturing

    Treesearch

    R. Bergman; D. Kaestner; A. Taylor

    2015-01-01

    Manufacturing building products such as wood panels has environmental impacts, including contributions to climate change. This paper is a compilation of four studies quantifying these impacts using the life-cycle assessment (LCA) method on five wood-based panel products made in North America during 2012. LCA is an internationally accepted and standardized method for...

  16. 75 FR 8190 - Art Advisory Panel of the Commissioner of Internal Revenue Service

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-02-23

    ... function, Panel records and discussions must include tax return information. Therefore, the Panel meetings... balanced between museum directors and curators, art dealers and auction representatives to afford differing...

  17. Finding and engaging patients and the public to work collaboratively on an acute infection microbiology research public panel.

    PubMed

    Grier, Sally; Evans, David; Gibson, Andy; Chin, Teh Li; Stoddart, Margaret; Kok, Michele; Campbell, Richard; Kenny, Val; MacGowan, Alasdair

    2018-01-01

    In 2015 a microbiology team in Bristol joined a European research project that aims to develop new antibiotics to fight drug resistant infections. The microbiology team were convinced of the benefits of patient and public involvement, but had found it difficult to find former patients to work with on earlier microbiology research. This paper describes how the team overcame this challenge to successfully recruit a PPI panel to develop PPI within the European project.The advice from people with experience in public involvement was to decide what criteria were desirable for panel membership, think about what the work of the panel might involve and how long the project will go on. The team decided that experience of suffering a serious acute infection would qualify people to comment on this project. Next, the team needed to identify ways of finding people to join the PPI panel.The microbiology research team tried different ways to approach potential panel members. These included distributing flyers at public research events, sending emails to potentially interested people, posting a message on the hospital Facebook page and approaching eligible people known to the team. A direct approach was the most successful method - either by email, mail or in person. Ultimately 16 people were selected to form the panel. Key factors for success were planning what the work of the panel might be, perseverance despite early lack of success, and one person having overall responsibility for setting up the panel, with the support of the whole team. Background In 2015 the microbiology research team became involved in a large European programme of research aiming to bring new antimicrobial drugs onto the market to combat the increasing problem of multi-drug resistant infection. With the purpose of developing patient and public involvement (PPI) in this project, the team decided to recruit a PPI panel to work with. The microbiology team had previously worked with a PPI panel on other

  18. P6 truss and radiator panels

    NASA Image and Video Library

    2005-07-28

    STS114-E-5283 (28 July 2005) --- This frame and STS114-E-5282 actually can be conjoined and rotated 90 degrees to make a single frame, providing an "astronaut's eye view" from Discovery's aft cabin looking toward the recently docked International Space Station. This frame shows the end of the P6 truss and a radiator panel. The two cropped cylinder-shaped objects are actually the base for the large solar array panels (out of frame).

  19. 61. Upper panel in cornerpower panel lcpa lower panel in ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    61. Upper panel in corner-power panel lcpa lower panel in corner-oxygen regeneration unit, at right-air conditioner control panel, on floor-bio-pack 45 for emergency breathing, looking northwest - Ellsworth Air Force Base, Delta Flight, Launch Control Facility, County Road CS23A, North of Exit 127, Interior, Jackson County, SD

  20. DETAIL VIEW OF SINGLE PANEL POINTS TAKEN FROM BRIDGE DECK, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    DETAIL VIEW OF SINGLE PANEL POINTS TAKEN FROM BRIDGE DECK, SHOWING CONNECTION BETWEEN VERTICAL AND UPPER CHORD MEMBER - White Bowstring Arch Truss Bridge, Spanning Yellow Creek at Cemetery Drive (Riverside Drive), Poland, Mahoning County, OH

  1. PLACING TOP CHORD CENTER PANEL. View to the northwest from ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    PLACING TOP CHORD CENTER PANEL. View to the northwest from the old suspension bridge. Chord members in place - South Fork Trinity River Bridge, State Highway 299 spanning South Fork Trinity River, Salyer, Trinity County, CA

  2. 78 FR 48231 - Open Meeting of the Taxpayer Advocacy Panel Joint Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-07

    ... DEPARTMENT OF THE TREASURY Internal Revenue Service Open Meeting of the Taxpayer Advocacy Panel... open meeting of the Taxpayer Advocacy Panel Joint Committee will be conducted. The Taxpayer Advocacy...) that an open meeting of the Taxpayer Advocacy Panel Joint Committee will be held Wednesday, September...

  3. How family members of mentally ill offenders experience the internment measure and (forensic) psychiatric treatment in Belgium: A qualitative study.

    PubMed

    Rowaert, Sara; Vandevelde, Stijn; Lemmens, Gilbert; Audenaert, Kurt

    Mentally ill offenders in Belgium can be subjected to mandated care under an "internment measure" if they are viewed as a danger to society. This study investigated how family members of mentally ill offenders experience this internment measure and view the (forensic) psychiatric treatment of their relative. Semi-structured interviews were conducted with 24 relatives and analysed using Nvivo 11. Six different themes emerged: (1) the criminal offence and the internment measure as an additional stigma, (2) ambivalent feelings towards the judicial system, (3) prison is not the right place to be, (4) mental health support as an answer to problems, (5) fight a losing battle, and (6) while there is life there is hope. The experiences of family members indicate the need for improved treatment guidelines that allow earlier compulsory interventions to prevent crime and preferential admission to (forensic) psychiatric facilities rather than prisons. In addition, family members expressed the need for better communication from mental health professionals and the judicial system during the process and greater availability of peer support. Copyright © 2017 Elsevier Ltd. All rights reserved.

  4. Panel discussion: Roles of space program in the Asia Pacific region

    NASA Astrophysics Data System (ADS)

    Nomura, Tamiya

    1992-03-01

    A panel discussion on the subject 'Roles played by space development in Asia Pacific region' was held chaired by Space Activities Commission member and attended by the representatives of the participating countries, special attendance and observers. Opinions were expressed by each representative on three subjects, that is, social effects and benefits obtained by remote sensing data, observation data desired to augment the effect, and expectation for developed countries in space development. President of NASDA (National Space Development Agency of Japan) expressed his intension to promote international cooperation for the Japanese Earth Resources Satellite-1 (JERS-1) verification program, utilization augmentation of Japanese earth observing satellites and human resource training and education. Deputy Director-General for Science and Technology Agency (STA) outlined ASCA (Association for Science Cooperation in Asia) seminar and STA fellowship in relation to human resource development. Chairman of the Japan International Space Year (ISY) Association cited the necessity of closer and extensive communication networks free from the existing commercial communication. Deputy-Minister for Posts and Telecommunications outlined the PARTNERS project (Post-operational utilization of the Engineering Test Satellite-5 (ETS-5)) for international cooperation in space activities in Asia Pacific region. President of the Institute of Space and Astronautical Science (ISAS) outlined Japan's present status of and international cooperation in space science.

  5. 78 FR 5778 - North American Free Trade Agreement (NAFTA), Article 1904 Binational Panel Reviews

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-01-28

    ... DEPARTMENT OF COMMERCE International Trade Administration North American Free Trade Agreement (NAFTA), Article 1904 Binational Panel Reviews AGENCY: NAFTA Secretariat, United States Section... the Panel Order and Rule 80 of the Article 1904 Panel Rules, the Panel Review was completed and the...

  6. A higher order panel method for linearized supersonic flow

    NASA Technical Reports Server (NTRS)

    Ehlers, F. E.; Epton, M. A.; Johnson, F. T.; Magnus, A. E.; Rubbert, P. E.

    1979-01-01

    The basic integral equations of linearized supersonic theory for an advanced supersonic panel method are derived. Methods using only linear varying source strength over each panel or only quadratic doublet strength over each panel gave good agreement with analytic solutions over cones and zero thickness cambered wings. For three dimensional bodies and wings of general shape, combined source and doublet panels with interior boundary conditions to eliminate the internal perturbations lead to a stable method providing good agreement experiment. A panel system with all edges contiguous resulted from dividing the basic four point non-planar panel into eight triangular subpanels, and the doublet strength was made continuous at all edges by a quadratic distribution over each subpanel. Superinclined panels were developed and tested on s simple nacelle and on an airplane model having engine inlets, with excellent results.

  7. Aerospace Safety Advisory Panel Annual Report for 1999

    NASA Technical Reports Server (NTRS)

    Blomberg, Richard D.

    2000-01-01

    This report covers the activities of the Aerospace Safety Advisory Panel (ASAP) for the calendar year 1999.This was a year of notable achievements and significant frustrations. Both the Space Shuttle and International Space Station (ISS) programs were delayed.The Space Shuttle prudently postponed launches after the occurrence of a wiring short during ascent of the STS-93 mission. The ISS construction schedule slipped as a result of the Space Shuttle delays and problems the Russians experienced in readying the Service Module and its launch vehicle. Each of these setbacks was dealt with in a constructive way. The STS-93 short circuit led to detailed wiring inspections and repairs on all four orbiters as well as analysis of other key subsystems for similar types of hidden damage. The ISS launch delays afforded time for further testing, training, development, and contingency planning. The safety consciousness of the NASA and contractor workforces, from hands-on labor to top management, continues high. Nevertheless, workforce issues remain among the most serious safety concerns of the Panel. Cutbacks and reorganizations over the past several years have resulted in problems related to workforce size, critical skills, and the extent of on-the-job experience. These problems have the potential to impact safety as the Space Shuttle launch rate increases to meet the demands of the ISS and its other customers. As with last year's report, these work- force-related issues were considered of sufficient import to place them first in the material that follows. Some of the same issues of concern for the Space Shuttle and ISS arose in a review of the launch vehicle for the Terra mission that the Panel was asked by NASA to undertake. Other areas the Panel was requested to assess included the readiness of the Inertial Upper Stage for the deployment of the Chandra X-ray Observatory and the possible safety impact of electromagnetic effects on the Space Shuttle. The findings and

  8. 6. DETAIL VIEW OF SINGLE PANEL POINTS TAKEN FROM BRIDGE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. DETAIL VIEW OF SINGLE PANEL POINTS TAKEN FROM BRIDGE DECK, SHOWING CONNECTION BETWEEN VERTICAL AND UPPER CHORD MEMBER. - White Bowstring Arch Truss Bridge, Spanning Yellow Creek at Cemetery Drive (Riverside Drive), Poland, Mahoning County, OH

  9. 78 FR 36303 - Open Meeting of the Taxpayer Advocacy Panel Joint Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-17

    ... DEPARTMENT OF THE TREASURY Internal Revenue Service Open Meeting of the Taxpayer Advocacy Panel... open meeting of the Taxpayer Advocacy Panel Joint Committee will be conducted. The Taxpayer Advocacy... open meeting of the Taxpayer Advocacy Panel Joint Committee will be held Wednesday, July 24, 2013 at 2...

  10. 77 FR 40410 - Open Meeting of the Taxpayer Advocacy Panel Joint Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-09

    ... DEPARTMENT OF THE TREASURY Internal Revenue Service Open Meeting of the Taxpayer Advocacy Panel... open meeting of the Taxpayer Advocacy Panel Joint Committee will be conducted. The Taxpayer Advocacy...) that an open meeting of the Taxpayer Advocacy Panel Joint Committee will be held Wednesday, August 22...

  11. Aerospace Safety Advisory Panel

    NASA Technical Reports Server (NTRS)

    1998-01-01

    During 1997, the Aerospace Safety Advisory Panel (ASAP) continued its safety reviews of NASA's human space flight and aeronautics programs. Efforts were focused on those areas that the Panel believed held the greatest potential to impact safety. Continuing safe Space Shuttle operations and progress in the manufacture and testing of primary components for the International Space Station (ISS) were noteworthy. The Panel has continued to monitor the safety implications of the transition of Space Shuttle operations to the United Space Alliance (USA). One area being watched closely relates to the staffing levels and skill mix in both NASA and USA. Therefore, a section of this report is devoted to personnel and other related issues that are a result of this change in NASA's way of doing business for the Space Shuttle. Attention will continue to be paid to this important topic in subsequent reports. Even though the Panel's activities for 1997 were extensive, fewer specific recommendations were formulated than has been the case in recent years. This is indicative of the current generally good state of safety of NASA programs. The Panel does, however, have several longer term concerns that have yet to develop to the level of a specific recommendation. These are covered in the introductory material for each topic area in Section 11. In another departure from past submissions, this report does not contain individual findings and recommendations for the aeronautics programs. While the Panel devoted its usual efforts to examining NASA's aeronautic centers and programs, no specific recommendations were identified for inclusion in this report. In lieu of recommendations, a summary of the Panel's observations of NASA's safety efforts in aeronautics and future Panel areas of emphasis is provided. With profound sadness the Panel notes the passing of our Chairman, Paul M. Johnstone, on December 17, 1997, and our Staff Assistant, Ms. Patricia M. Harman, on October 5, 1997. Other

  12. Panel management, team culture, and worklife experience.

    PubMed

    Willard-Grace, Rachel; Dubé, Kate; Hessler, Danielle; O'Brien, Bridget; Earnest, Gillian; Gupta, Reena; Shunk, Rebecca; Grumbach, Kevin

    2015-09-01

    Burnout and professional dissatisfaction are threats to the primary care workforce. We investigated the relationship between panel management capability, team culture, cynicism, and perceived "do-ability" of primary care among primary care providers (PCPs) and staff in primary care practices. We surveyed 326 PCPs and 142 staff members in 10 county-administered, 6 university-run, and 3 Veterans Affairs primary care clinics in a large urban area in 2013. Predictor variables included capability for performing panel management and perception of team culture. Outcome variables included 2 work experience measures--the Maslach Burnout Inventory cynicism scale and a 1-item measure of the "do-ability" of primary care this year compared with last year. Generalized Estimation Equation (GEE) models were used to account for clustering at the clinic level. Greater panel management capability and higher team culture were associated with lower cynicism among PCPs and staff and higher reported "do-ability" of primary care among PCPs. Panel management capability and team culture interacted to predict the 2 work experience outcomes. Among PCPs and staff reporting high team culture, there was little association between panel management capability and the outcomes, which were uniformly positive. However, there was a strong relationship between greater panel management capability and improved work experience outcomes for PCPs and staff reporting low team culture. Team-based processes of care such as panel management may be an important strategy to protect against cynicism and dissatisfaction in primary care, particularly in settings that are still working to improve their team culture. (c) 2015 APA, all rights reserved).

  13. 5. DETAIL VIEW OF TWO PANEL POINTS OF TRUSS, SHOWING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. DETAIL VIEW OF TWO PANEL POINTS OF TRUSS, SHOWING OVAL, TUBULAR UPPER CHORD MEMBER, VERTICALS, DIAGONALS, AND LOWER CHORD. - White Bowstring Arch Truss Bridge, Spanning Yellow Creek at Cemetery Drive (Riverside Drive), Poland, Mahoning County, OH

  14. Nutrititional Status Assessment of International Space Station Crew Members

    NASA Technical Reports Server (NTRS)

    Smith, S. M.; Zwart, S. R.; Block, G.; Rice, B. I.; Davis-Street, J. F.

    2005-01-01

    Defining optimal nutrient requirements is imperative to ensure crew health on long-duration space exploration missions. To date, nutrient requirement data have been extremely limited because of small sample sizes and difficulties associated with collecting biological samples. In this study, we examined changes in body composition, bone metabolism, hematology, general blood chemistry, and blood levels of selected vitamins and minerals after long-duration (128-195 d) space flight aboard the International Space Station. Crew members consumed an average of 80% of the recommended energy intakes, and on landing day their body weight had decreased (P=0.051). After flight, hematocrit was less, and serum femtin was greater than before flight (P<0.01). Serum iron, ferritin saturation, and transferrin had decreased after flight. The finding that other acute-phase proteins, including ceruloplasmin, retinol binding protein, transthyretin, and albumin were not changed after flight suggests that the changes in iron metabolism may not be strictly due to an inflammatory response. Urinary 8- hydroxy-2'-deoxyguanosine concentration was greater and superoxide dismutase was less after flight, indicating that oxidative damage had increased (P<0.05). Despite the reported use of vitamin D supplements during flight, serum 25-hydroxyvitamin D was significantly decreased after flight (P<0.01). Bone resorption was increased after flight, as indicated by several urinary markers of bone resorption. Bone formation, assessed by serum concentration of bone-specific alkaline phosphatase, was elevated only in crew members who landed in Russia, probably because of the longer time lapse between landing and sample collection. These data provide evidence that bone loss, compromised vitamin D status, and oxidative damage remain critical concerns for long-duration space flight.

  15. Hot-spot investigations of utility scale panel configurations

    NASA Technical Reports Server (NTRS)

    Arnett, J. C.; Dally, R. B.; Rumburg, J. P.

    1984-01-01

    The causes of array faults and efforts to mitigate their effects are examined. Research is concentrated on the panel for the 900 kw second phase of the Sacramento Municipal Utility District (SMUD) project. The panel is designed for hot spot tolerance without comprising efficiency under normal operating conditions. Series/paralleling internal to each module improves tolerance in the power quadrant to cell short or open circuits. Analtyical methods are developed for predicting worst case shade patterns and calculating the resultant cell temperature. Experiments conducted on a prototype panel support the analytical calculations.

  16. 77 FR 61052 - Open Meeting of the Taxpayer Advocacy Panel Toll-Free Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-05

    ... Taxpayer Advocacy Panel is soliciting public comments, ideas and suggestions on improving customer service... DEPARTMENT OF THE TREASURY Internal Revenue Service Open Meeting of the Taxpayer Advocacy Panel Toll-Free Project Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of meeting...

  17. 77 FR 21156 - Open Meeting of the Taxpayer Advocacy Panel Toll-Free Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-09

    ... Taxpayer Advocacy Panel is soliciting public comments, ideas and suggestions on improving customer service... DEPARTMENT OF THE TREASURY Internal Revenue Service Open Meeting of the Taxpayer Advocacy Panel Toll-Free Project Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of Meeting...

  18. 77 FR 8328 - Open Meeting of the Taxpayer Advocacy Panel Toll-Free Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-14

    ... Taxpayer Advocacy Panel is soliciting public comments, ideas and suggestions on improving customer service... DEPARTMENT OF THE TREASURY Internal Revenue Service Open Meeting of the Taxpayer Advocacy Panel Toll-Free Project Committee AGENCY: Internal Revenue Service (IRS) Treasury. ACTION: Notice of meeting...

  19. Panel urges cloning ethics boards

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Marshall, E.

    1997-01-03

    A 7-month review of the system that guides U.S. policy on the ethical, legal, and social issues (ELSI) of the Human Genome Project has concluded that it is time for a radical overhaul. A report completed last month recommends that a high-level policy board be created in the office of the Secretary of Health and Human Services to help develop policies on such sensitive issues as genetic privacy, antidiscrimination legislation, public education on genetic risks, and the regulation of genetic testing. If accepted, the proposal-from a review panel chaired by attorney Mark Rothstein of the University of Houston and geneticistmore » M. Anne Spence of the University of California, Irvine-would create a new panel of 15 to 18 members to serve as {open_quotes}a public forum for discussion of ... critical issues.{close_quotes} This panel would replace the current advisory body, known as the ELSI Working Group, and end what the report calls a {open_quotes}discordance{close_quotes} between the broad scope of the Working Group and the {open_quotes}very limited focus{close_quotes} of the research program under which it operates.« less

  20. Emissions and Noise Pervasive Panel

    NASA Technical Reports Server (NTRS)

    Henderson, Brenda; Lee, Chi

    2008-01-01

    Objectives include: Provide interagency coordination of technology development, aimed at engine noise reduction. a) Provide recommendations to the Steering Committee on potential areas of interagency technology collaboration to maximize the use of government investments in noise reduction. b) Serve as a forum for information and technology exchange in order to coordinate gas turbine engine environmental strategies and policies among the member agencies and industry; c) Coordinate activities across panel representatives; and d) Communicate progress to VAATE steering committee.

  1. PSI Member Profile.

    ERIC Educational Resources Information Center

    Professional Secretaries International, Kansas City, MO.

    A survey of 2,700 of the 27,000 members of Professional Secretaries International received 755 responses yielding the following profile of secretarial workers: (1) the average member is female, about 45 years old, married with no dependents living at home, and owns a single-family home in the suburbs; (2) most respondents have worked in office or…

  2. Effects of High School Exit Exams on Dropout Rates: Summary of a Panel Discussion.

    ERIC Educational Resources Information Center

    Chudowsky, Naomi; Gayler, Keith

    This paper summarizes a panel discussion that addressed exit-exam policies and dropout issues. It presents the panel members' conclusions about existing research and their recommendations on what kinds of further work are needed. Research on how exit exams affect dropout rates is limited and inconclusive, so policies continue to be made in the…

  3. Diagnosis and management of AML in adults: 2017 ELN recommendations from an international expert panel

    PubMed Central

    Estey, Elihu; Grimwade, David; Amadori, Sergio; Appelbaum, Frederick R.; Büchner, Thomas; Dombret, Hervé; Ebert, Benjamin L.; Fenaux, Pierre; Larson, Richard A.; Levine, Ross L.; Lo-Coco, Francesco; Naoe, Tomoki; Niederwieser, Dietger; Ossenkoppele, Gert J.; Sanz, Miguel; Sierra, Jorge; Tallman, Martin S.; Tien, Hwei-Fang; Wei, Andrew H.; Löwenberg, Bob; Bloomfield, Clara D.

    2017-01-01

    The first edition of the European LeukemiaNet (ELN) recommendations for diagnosis and management of acute myeloid leukemia (AML) in adults, published in 2010, has found broad acceptance by physicians and investigators caring for patients with AML. Recent advances, for example, in the discovery of the genomic landscape of the disease, in the development of assays for genetic testing and for detecting minimal residual disease (MRD), as well as in the development of novel antileukemic agents, prompted an international panel to provide updated evidence- and expert opinion-based recommendations. The recommendations include a revised version of the ELN genetic categories, a proposal for a response category based on MRD status, and criteria for progressive disease. PMID:27895058

  4. 76 FR 62364 - North American Free Trade Agreement (NAFTA), Article 1904 Binational Panel Reviews; Notice of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-07

    ... DEPARTMENT OF COMMERCE International Trade Administration North American Free Trade Agreement (NAFTA), Article 1904 Binational Panel Reviews; Notice of Completion of Panel Review AGENCY: NAFTA... of the Panel Order and Rule 80 of the Article 1904 Panel Rules, the Panel Review was completed and...

  5. PMARC - PANEL METHOD AMES RESEARCH CENTER

    NASA Technical Reports Server (NTRS)

    Ashby, D. L.

    1994-01-01

    Panel methods are moderate cost tools for solving a wide range of engineering problems. PMARC (Panel Method Ames Research Center) is a potential flow panel code that numerically predicts flow fields around complex three-dimensional geometries. PMARC's predecessor was a panel code named VSAERO which was developed for NASA by Analytical Methods, Inc. PMARC is a new program with many additional subroutines and a well-documented code suitable for powered-lift aerodynamic predictions. The program's open architecture facilitates modifications or additions of new features. Another improvement is the adjustable size code which allows for an optimum match between the computer hardware available to the user and the size of the problem being solved. PMARC can be resized (the maximum number of panels can be changed) in a matter of minutes. Several other state-of-the-art PMARC features include internal flow modeling for ducts and wind tunnel test sections, simple jet plume modeling essential for the analysis and design of powered-lift aircraft, and a time-stepping wake model which allows the study of both steady and unsteady motions. PMARC is a low-order panel method, which means the singularities are distributed with constant strength over each panel. In many cases low-order methods can provide nearly the same accuracy as higher order methods (where the singularities are allowed to vary linearly or quadratically over each panel). Low-order methods have the advantage of a shorter computation time and do not require exact matching between panels. The flow problem is solved by assuming that the body is at rest in a moving flow field. The body is modeled as a closed surface which divides space into two regions -- one region contains the flow field of interest and the other contains a fictitious flow. External flow problems, such as a wing in a uniform stream, have the external region as the flow field of interest and the internal flow as the fictitious flow. This arrangement is

  6. Learning from Each Other. The Official Proceedings of the International Symposium of Japan-America Societies (1st, Honolulu, Hawaii, June 18-21, 1995).

    ERIC Educational Resources Information Center

    Correa, E. Shan, Ed.

    This book provides a compilation of addresses and panel presentations from the 1995 International Symposium of Japan-America Societies. Twenty-nine eminent speakers and presenters, authorities on topics ranging from economics to education, shared dialogue with delegates who gathered for the first-ever meeting of members of Japan-America Societies…

  7. Life cycle impacts of North American wood panel Manufacturing

    Treesearch

    Richard Bergman; D. Kaestner; A. M. Taylor

    2016-01-01

    Manufacturing building products such as wood panels impacts the environment, including contributing to climate change. This study is a compilation of four studies quantifying these impacts using the life cycle assessment (LCA) method on five wood-based panel products made in North America during 2012. LCA is an internationally accepted and standardized method for...

  8. Nonlinear Analysis and Post-Test Correlation for a Curved PRSEUS Panel

    NASA Technical Reports Server (NTRS)

    Gould, Kevin; Lovejoy, Andrew E.; Jegley, Dawn; Neal, Albert L.; Linton, Kim, A.; Bergan, Andrew C.; Bakuckas, John G., Jr.

    2013-01-01

    The Pultruded Rod Stitched Efficient Unitized Structure (PRSEUS) concept, developed by The Boeing Company, has been extensively studied as part of the National Aeronautics and Space Administration's (NASA s) Environmentally Responsible Aviation (ERA) Program. The PRSEUS concept provides a light-weight alternative to aluminum or traditional composite design concepts and is applicable to traditional-shaped fuselage barrels and wings, as well as advanced configurations such as a hybrid wing body or truss braced wings. Therefore, NASA, the Federal Aviation Administration (FAA) and The Boeing Company partnered in an effort to assess the performance and damage arrestments capabilities of a PRSEUS concept panel using a full-scale curved panel in the FAA Full-Scale Aircraft Structural Test Evaluation and Research (FASTER) facility. Testing was conducted in the FASTER facility by subjecting the panel to axial tension loads applied to the ends of the panel, internal pressure, and combined axial tension and internal pressure loadings. Additionally, reactive hoop loads were applied to the skin and frames of the panel along its edges. The panel successfully supported the required design loads in the pristine condition and with a severed stiffener. The panel also demonstrated that the PRSEUS concept could arrest the progression of damage including crack arrestment and crack turning. This paper presents the nonlinear post-test analysis and correlation with test results for the curved PRSEUS panel. It is shown that nonlinear analysis can accurately calculate the behavior of a PRSEUS panel under tension, pressure and combined loading conditions.

  9. The development of optimal lightweight truss-core sandwich panels

    NASA Astrophysics Data System (ADS)

    Langhorst, Benjamin Robert

    Sandwich structures effectively provide lightweight stiffness and strength by sandwiching a low-density core between stiff face sheets. The performance of lightweight truss-core sandwich panels is enhanced through the design of novel truss arrangements and the development of methods by which the panels may be optimized. An introduction to sandwich panels is presented along with an overview of previous research of truss-core sandwich panels. Three alternative truss arrangements are developed and their corresponding advantages, disadvantages, and optimization routines are discussed. Finally, performance is investigated by theoretical and numerical methods, and it is shown that the relative structural efficiency of alternative truss cores varies with panel weight and load-carrying capacity. Discrete truss core sandwich panels can be designed to serve bending applications more efficiently than traditional pyramidal truss arrangements at low panel weights and load capacities. Additionally, discrete-truss cores permit the design of heterogeneous cores, which feature unit cells that vary in geometry throughout the panel according to the internal loads present at each unit cell's location. A discrete-truss core panel may be selectively strengthened to more efficiently support bending loads. Future research is proposed and additional areas for lightweight sandwich panel development are explained.

  10. Panel established to revise position statement on climate change

    NASA Astrophysics Data System (ADS)

    President Robert Dickinson has appointed a panel to review the current AGU position statement on climate change and greenhouse gases, and to consider revising the statement to reflect scientific progress over the last four years. Marvin Geller of the State University of New York-Stonybrook chairs the panel.Other panel members include: Andre Berger, George Lemaître Catholic University of Louvain, Belgium; Anny Cazenave, Observatoire Midi-Pyrénées, Toulouse, France; John Christy, University of Alabama, Huntsville; Ellen Druffel, University of California, Irvine; Jack Fellows, University Consortium for Atmospheric Research, Boulder; Hiroshi Kanzawa, Nagoya University, Japan; William Schlesinger, Duke University, Durham; William (Jim) Shuttleworth, University of Arizona; Eric Sundquist, U.S. Geological Survey, Woods Hole; Richard Turco, University of California, Los Angeles; Ilana Wainer, Universidade Cidade Sao Paulo, Brazil.

  11. Development of Cardiovascular Quality Indicators for Rheumatoid Arthritis: Results from an International Expert Panel Using a Novel Online Process

    PubMed Central

    Barber, Claire E. H.; Marshall, Deborah A; Alvarez, Nanette; John Mancini, G. B.; Lacaille, Diane; Keeling, Stephanie; Aviña-Zubieta, J. Antonio; Khodyakov, Dmitry; Barnabe, Cheryl; Faris, Peter; Smith, Alexa; Noormohamed, Raheem; Hazlewood, Glen; Martin, Liam O.; Esdaile, John M.

    2016-01-01

    Objective Patients with rheumatoid arthritis (RA) have a high risk of premature cardiovascular disease (CVD). We developed CVD quality indicators (QIs) for screening and use in Rheumatology clinics. Methods A systematic review of the literature on CVD risk reduction in RA and the general population was conducted. Based on the best practices identified from this review, a draft set of 12 candidate QIs were presented to a Canadian panel of rheumatologists and cardiologists (n=6) from three academic centers to achieve consensus on the QI specifications. The resulting 11 QIs were then evaluated by an online modified-Delphi panel of multidisciplinary health professionals and patients (n = 43) to determine their relevance, validity and feasibility in three rounds of online voting and threaded discussion using a modified RAND/UCLA Appropriateness Methodology. Results Response rates for the online panel were 86%. All 11 QIs were rated as highly relevant, valid and feasible (median rating ≥7 on a 1–9 scale) with no significant disagreement. The final QI set addresses the following themes: communication to primary care about increased CV risk in RA, CV risk assessment, defining smoking status and providing cessation counseling, screening and addressing hypertension, dyslipidemia and diabetes, exercise recommendations, body mass index screening and lifestyle counseling, minimizing corticosteroid use and communicating to patients at high risk of CVD about the risks/benefits of non-steroidal anti-inflammatory drugs. Conclusion Eleven QIs for CVD care in RA patients have been developed and are rated as highly relevant, valid and feasible by an international multidisciplinary panel. PMID:26178275

  12. PLACING TOP CHORD CENTER PANEL. View is to the northwest ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    PLACING TOP CHORD CENTER PANEL. View is to the northwest from the old suspension bridge. Chord members being moved into place by jigger stick and highline - South Fork Trinity River Bridge, State Highway 299 spanning South Fork Trinity River, Salyer, Trinity County, CA

  13. 2015 Dust Risk Standing Review Panel

    NASA Technical Reports Server (NTRS)

    Steinberg, Susan

    2015-01-01

    The 2015 Dust Risk Standing Review Panel (SRP) participated in a WebEx/teleconference with members of the Space Human Factors and Habitability (SHFH) Element, representatives from the Human Research Program (HRP), NASA Headquarters, and the NASA Research Education and Support Services on November 12, 2015. The SRP reviewed the updated Evidence Report for The Risk of Adverse Health and Performance Effects of Celestial Dust Exposure, as well as the Research Plan for this Risk.

  14. Sock Shaped Internal Strength Member for Towed Arrays

    DTIC Science & Technology

    hose -shaped sheath. The member has a plurality of longitudinally extending high strength cords formed of braids or strands of high tensile strength...interfering with the sensors’ acoustic sensing capabilities. The hose -shaped sheath contains the tubular-shaped strength member in a non-compressive...relationship to reduce the problems normally associated with flow noise. The cords are braided together in an eye-splice where they are wrapped about

  15. Diagnosis and management of AML in adults: 2017 ELN recommendations from an international expert panel.

    PubMed

    Döhner, Hartmut; Estey, Elihu; Grimwade, David; Amadori, Sergio; Appelbaum, Frederick R; Büchner, Thomas; Dombret, Hervé; Ebert, Benjamin L; Fenaux, Pierre; Larson, Richard A; Levine, Ross L; Lo-Coco, Francesco; Naoe, Tomoki; Niederwieser, Dietger; Ossenkoppele, Gert J; Sanz, Miguel; Sierra, Jorge; Tallman, Martin S; Tien, Hwei-Fang; Wei, Andrew H; Löwenberg, Bob; Bloomfield, Clara D

    2017-01-26

    The first edition of the European LeukemiaNet (ELN) recommendations for diagnosis and management of acute myeloid leukemia (AML) in adults, published in 2010, has found broad acceptance by physicians and investigators caring for patients with AML. Recent advances, for example, in the discovery of the genomic landscape of the disease, in the development of assays for genetic testing and for detecting minimal residual disease (MRD), as well as in the development of novel antileukemic agents, prompted an international panel to provide updated evidence- and expert opinion-based recommendations. The recommendations include a revised version of the ELN genetic categories, a proposal for a response category based on MRD status, and criteria for progressive disease. © 2017 by The American Society of Hematology.

  16. 77 FR 72325 - North American Free Trade Agreement (NAFTA), Article 1904 Binational Panel Reviews

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-12-05

    ... DEPARTMENT OF COMMERCE International Trade Administration North American Free Trade Agreement (NAFTA), Article 1904 Binational Panel Reviews AGENCY: NAFTA Secretariat, United States Section... Order and Rule 80 of the Article 1904 Panel Rules, the Panel Review was completed and the panelists were...

  17. 78 FR 10600 - North American Free Trade Agreement (NAFTA), Article 1904 Binational Panel Reviews

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-14

    ... DEPARTMENT OF COMMERCE International Trade Administration North American Free Trade Agreement (NAFTA), Article 1904 Binational Panel Reviews AGENCY: NAFTA Secretariat, United States Section... Order and Rule 80 of the Article 1904 Panel Rules, the Panel Review was completed and the panelists were...

  18. 78 FR 11627 - North American Free Trade Agreement (NAFTA), Article 1904 Binational Panel Reviews

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-19

    ... DEPARTMENT OF COMMERCE International Trade Administration North American Free Trade Agreement (NAFTA), Article 1904 Binational Panel Reviews AGENCY: NAFTA Secretariat, United States Section... Order and Rule 80 of the Article 1904 Panel Rules, the Panel Review was completed and the panelists were...

  19. 78 FR 17639 - North American Free Trade Agreement (NAFTA), Article 1904 Binational Panel Reviews

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-22

    ... DEPARTMENT OF COMMERCE International Trade Administration North American Free Trade Agreement (NAFTA), Article 1904 Binational Panel Reviews AGENCY: NAFTA Secretariat, United States Section... Order and Rule 80 of the Article 1904 Panel Rules, the Panel Review was completed and the panelists were...

  20. 76 FR 23286 - North American Free Trade Agreement (NAFTA), Article 1904 Binational Panel Reviews: Notice of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-26

    ... DEPARTMENT OF COMMERCE International Trade Administration North American Free Trade Agreement (NAFTA), Article 1904 Binational Panel Reviews: Notice of Completion of Panel Review AGENCY: NAFTA... Rule 80 of the Article 1904 Panel Rules, the Panel Review was completed and the panelists were...

  1. The Food and Drug Administration advisory committees and panels: how they are applied to the drug regulatory process.

    PubMed

    Ciociola, Arthur A; Karlstadt, Robyn G; Pambianco, Daniel J; Woods, Karen L; Ehrenpreis, Eli D

    2014-10-01

    Food and Drug Administration (FDA) advisory panels and committees play a critical role in advising the FDA on the safety and efficacy of medical devices and drugs marketed in the US. Advisory panel recommendations are used by the FDA to make decisions regarding medical products. Currently, the FDA utilizes over 50 advisory panels that serve the three major FDA centers, including the Centers for Biologics, Drugs and Device Products. Members of an advisory panel typically include academicians, clinicians, consumers, patients, and industry representatives. The FDA establishes the schedules for advisory panel meetings on an annual basis and a panel usually meets several times a year for two consecutive days in Washington, DC. Typically, the advisory panel discusses issues highlighted by the FDA and is then asked to vote a response to the questions posed in advance by the FDA. Advisory panel recommendations have a strong influence on FDA's decision to approve a product, as evidenced by the 214 Advisory Panels FDA convened between January 2008 to November 2012, during which advisory panel members voted to approve the product (or use of the product) ∼74% of the time, with FDA ultimately approving the medical product (or use of the product) ∼79% of the time. The ACG membership are encouraged to consider serving the public's interest by participating in an FDA advisory panel utilizing their expertise for the evaluation of a new drug or medical device, and providing advice about whether the product should be sold in the US.

  2. 75 FR 51286 - Certain Flat Panel Digital Televisions and Components Thereof; Notice of Investigation

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-19

    ... INTERNATIONAL TRADE COMMISSION [Inv. No. 337-TA-733] Certain Flat Panel Digital Televisions and... importation, and the sale within the United States after importation of certain flat panel digital televisions... after importation of certain flat panel digital televisions and components thereof that infringe one or...

  3. 75 FR 54594 - North American Free Trade Agreement (NAFTA), Article 1904; Binational Panel Reviews: Notice of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-09-08

    ... DEPARTMENT OF COMMERCE International Trade Administration North American Free Trade Agreement (NAFTA), Article 1904; Binational Panel Reviews: Notice of Completion of Panel Review AGENCY: NAFTA... was filed. Therefore, on the basis of the Panel Order and Rule 80 of the Article 1904 Panel Rules, the...

  4. Establishment and validation of analytical reference panels for the standardization of quantitative BCR-ABL1 measurements on the international scale.

    PubMed

    White, Helen E; Hedges, John; Bendit, Israel; Branford, Susan; Colomer, Dolors; Hochhaus, Andreas; Hughes, Timothy; Kamel-Reid, Suzanne; Kim, Dong-Wook; Modur, Vijay; Müller, Martin C; Pagnano, Katia B; Pane, Fabrizio; Radich, Jerry; Cross, Nicholas C P; Labourier, Emmanuel

    2013-06-01

    Current guidelines for managing Philadelphia-positive chronic myeloid leukemia include monitoring the expression of the BCR-ABL1 (breakpoint cluster region/c-abl oncogene 1, non-receptor tyrosine kinase) fusion gene by quantitative reverse-transcription PCR (RT-qPCR). Our goal was to establish and validate reference panels to mitigate the interlaboratory imprecision of quantitative BCR-ABL1 measurements and to facilitate global standardization on the international scale (IS). Four-level secondary reference panels were manufactured under controlled and validated processes with synthetic Armored RNA Quant molecules (Asuragen) calibrated to reference standards from the WHO and the NIST. Performance was evaluated in IS reference laboratories and with non-IS-standardized RT-qPCR methods. For most methods, percent ratios for BCR-ABL1 e13a2 and e14a2 relative to ABL1 or BCR were robust at 4 different levels and linear over 3 logarithms, from 10% to 0.01% on the IS. The intraassay and interassay imprecision was <2-fold overall. Performance was stable across 3 consecutive lots, in multiple laboratories, and over a period of 18 months to date. International field trials demonstrated the commutability of the reagents and their accurate alignment to the IS within the intra- and interlaboratory imprecision of IS-standardized methods. The synthetic calibrator panels are robust, reproducibly manufactured, analytically calibrated to the WHO primary standards, and compatible with most BCR-ABL1 RT-qPCR assay designs. The broad availability of secondary reference reagents will further facilitate interlaboratory comparative studies and independent quality assessment programs, which are of paramount importance for worldwide standardization of BCR-ABL1 monitoring results and the optimization of current and new therapeutic approaches for chronic myeloid leukemia. © 2013 American Association for Clinical Chemistry.

  5. 77 FR 40261 - The Interagency Security Classification Appeals Panel (ISCAP) Bylaws, Rules, and Appeal Procedures

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-09

    ... in order to fulfill the Panel's functions. (d) Member vacancies. Vacancies among the primary members... (Article I). 2003.2 Authority (Article II). 2003.3 Functions (Article III). 2003.4 Membership (Article IV... section 3.5 of the Order. 2003.14 Dissemination of ISCAP decisions. 2003.15 Additional functions...

  6. 76 FR 45007 - Open Meeting of the Taxpayer Advocacy Panel Tax Forms and Publications Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-07-27

    ... DEPARTMENT OF THE TREASURY Internal Revenue Service Open Meeting of the Taxpayer Advocacy Panel Tax Forms and Publications Project Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Tax Forms and Publications...

  7. 77 FR 67735 - Open Meeting of the Taxpayer Advocacy Panel Tax Forms and Publications Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-11-13

    ... DEPARTMENT OF THE TREASURY Internal Revenue Service Open Meeting of the Taxpayer Advocacy Panel Tax Forms and Publications Project Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of Meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Tax Forms and Publications...

  8. Solar Panels and Alternative Energy in the Eighth-Grade Classroom

    ERIC Educational Resources Information Center

    Buck, Laura

    2010-01-01

    In this solar panels and alternative energy project, students were challenged to develop a researchable question about solar energy and electronics and devise a means of answering it. Students worked cooperatively, with specific roles for each member, conducting research, conducting experiments, analyzing results, and writing the final…

  9. 76 FR 80949 - Request for Nominations for Voting Members on Public Advisory Panels or Committees

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-12-27

    .... Molecular and Clinical 1 June 1, 2012. Genetics Devices Panel of the Medical Devices Advisory Committee..., biochemical and/or molecular genetics, population genetics, epidemiology and related statistical training, and clinical molecular genetics testing (e.g., genotyping, array CGH, etc.). Individuals with experience in...

  10. 75 FR 40033 - Proposed Collection; Comment Request for Taxpayer Advocacy Panel (TAP) Tax Check Waiver

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-13

    ... Taxpayer Advocacy Panel (TAP) Tax Check Waiver AGENCY: Internal Revenue Service (IRS), Treasury. ACTION... comments concerning Taxpayer Advocacy Panel (TAP) Tax Check Waiver. DATES: Written comments should [email protected] . SUPPLEMENTARY INFORMATION: Title: Taxpayer Advocacy Panel (TAP) Tax Check Waiver. OMB...

  11. Perceptions of the Role of Short-Term Volunteerism in International Development: Views from Volunteers, Local Hosts, and Community Members.

    PubMed

    Loiseau, Bethina; Sibbald, Rebekah; Raman, Salem A; Darren, Benedict; Loh, Lawrence C; Dimaras, Helen

    2016-01-01

    Background. Short-term international volunteer trips traditionally involve volunteers from high-income countries travelling to low- and middle-income countries to assist in service-related development activities. Their duration typically ranges from 7 to 90 days. The city of La Romana, Dominican Republic, receives hundreds of short-term international volunteers annually. They participate in activities aimed at improving conditions faced by a marginalized ethnic-Haitian community living in bateyes. Methods. This qualitative analysis examined perceptions of short-term international volunteerism, held by three key stakeholder groups in La Romana: local hosts, international volunteers, and community members. Responses from semistructured interviews were recorded and analysed by thematic analysis. Results. Themes from the 3 groups were broadly categorized into general perceptions of short-term volunteerism and proposed best practices. These were further subdivided into perceptions of value, harms, and motivations associated with volunteer teams for the former and best practices around volunteer composition and selection, partnership, and skill sets and predeparture training for the latter. Conclusion. Notable challenges were associated with short-term volunteering, including an overemphasis on the material benefits from volunteer groups expressed by community member respondents; misalignment of the desired and actual skill sets of volunteers; duplicate and uncoordinated volunteer efforts; and the perpetuation of stereotypes suggesting that international volunteers possess superior knowledge or skills. Addressing these challenges is critical to optimizing the conduct of short-term volunteerism.

  12. Perceptions of the Role of Short-Term Volunteerism in International Development: Views from Volunteers, Local Hosts, and Community Members

    PubMed Central

    Loiseau, Bethina; Sibbald, Rebekah; Raman, Salem A.; Darren, Benedict; Loh, Lawrence C.

    2016-01-01

    Background. Short-term international volunteer trips traditionally involve volunteers from high-income countries travelling to low- and middle-income countries to assist in service-related development activities. Their duration typically ranges from 7 to 90 days. The city of La Romana, Dominican Republic, receives hundreds of short-term international volunteers annually. They participate in activities aimed at improving conditions faced by a marginalized ethnic-Haitian community living in bateyes. Methods. This qualitative analysis examined perceptions of short-term international volunteerism, held by three key stakeholder groups in La Romana: local hosts, international volunteers, and community members. Responses from semistructured interviews were recorded and analysed by thematic analysis. Results. Themes from the 3 groups were broadly categorized into general perceptions of short-term volunteerism and proposed best practices. These were further subdivided into perceptions of value, harms, and motivations associated with volunteer teams for the former and best practices around volunteer composition and selection, partnership, and skill sets and predeparture training for the latter. Conclusion. Notable challenges were associated with short-term volunteering, including an overemphasis on the material benefits from volunteer groups expressed by community member respondents; misalignment of the desired and actual skill sets of volunteers; duplicate and uncoordinated volunteer efforts; and the perpetuation of stereotypes suggesting that international volunteers possess superior knowledge or skills. Addressing these challenges is critical to optimizing the conduct of short-term volunteerism. PMID:27382372

  13. Individual payments as a longer-term incentive in online panels.

    PubMed

    Göritz, Anja S; Wolff, Hans-Georg; Goldstein, Daniel G

    2008-11-01

    Does it pay to pay online panel members? A three-wave longitudinal experiment was conducted with an online panel to examine whether per person payments, paid through an online intermediary, influence response and retention rates. In the payment condition, participants were promised payment for participation at each wave, whereas control participants were not offered any payment. The promise of a payment had a negative effect on response in Wave 1, but a positive effect on response in Wave 2. Payment had no significant effect on retention. Completing a given wave was an indicator for responding to a subsequent invitation.

  14. Diagnosis and management of acute myeloid leukemia in children and adolescents: recommendations from an international expert panel.

    PubMed

    Creutzig, Ursula; van den Heuvel-Eibrink, Marry M; Gibson, Brenda; Dworzak, Michael N; Adachi, Souichi; de Bont, Eveline; Harbott, Jochen; Hasle, Henrik; Johnston, Donna; Kinoshita, Akitoshi; Lehrnbecher, Thomas; Leverger, Guy; Mejstrikova, Ester; Meshinchi, Soheil; Pession, Andrea; Raimondi, Susana C; Sung, Lillian; Stary, Jan; Zwaan, Christian M; Kaspers, Gertjan J L; Reinhardt, Dirk

    2012-10-18

    Despite major improvements in outcome over the past decades, acute myeloid leukemia (AML) remains a life-threatening malignancy in children, with current survival rates of ∼70%. State-of-the-art recommendations in adult AML have recently been published in this journal by Döhner et al. The primary goal of an international expert panel of the International BFM Study Group AML Committee was to set standards for the management, diagnosis, response assessment, and treatment in childhood AML. This paper aims to discuss differences between childhood and adult AML, and to highlight recommendations that are specific to children. The particular relevance of new diagnostic and prognostic molecular markers in pediatric AML is presented. The general management of pediatric AML, the management of specific pediatric AML cohorts (such as infants) or subtypes of the disease occurring in children (such as Down syndrome related AML), as well as new therapeutic approaches, and the role of supportive care are discussed.

  15. Inward Leakage Variability between Respirator Fit Test Panels – Part I. Deterministic Approach

    PubMed Central

    Zhuang, Ziqing; Liu, Yuewei; Coffey, Christopher C.; Miller, Colleen; Szalajda, Jonathan

    2015-01-01

    Inter-panel variability has never been investigated. The objective of this study was to determine the variability between different anthropometric panels used to determine the inward leakage (IL) of N95 filtering facepiece respirators (FFRs) and elastomeric half-mask respirators (EHRs). A total of 144 subjects, who were both experienced and non-experienced N95 FFR users, were recruited. Five N95 FFRs and five N95 EHRs were randomly selected from among those models tested previously in our laboratory. The PortaCount Pro+ (without N95-Companion) was used to measure IL of the ambient particles with a detectable size range of 0.02 to 1 μm. The Occupational Safety and Health Administration standard fit test exercises were used for this study. IL test were performed for each subject using each of the 10 respirators. Each respirator/subject combination was tested in duplicate, resulting in a total 20 IL tests for each subject. Three 35-member panels were randomly selected without replacement from the 144 study subjects stratified by the National Institute for Occupational Safety and Health bivariate panel cell for conducting statistical analyses. The geometric mean (GM) IL values for all 10 studied respirators were not significantly different among the three randomly selected 35-member panels. Passing rate was not significantly different among the three panels for all respirators combined or by each model. This was true for all IL pass/fail levels of 1%, 2%, and 5%. Using 26 or more subjects to pass the IL test, all three panels had consistent passing/failing results for pass/fail levels of 1% and 5%. Some disagreement was observed for the 2% pass/fail level. Inter-panel variability exists, but it is small relative to the other sources of variation in fit testing data. The concern about inter-panel variability and other types of variability can be alleviated by properly selecting: pass/fail level (IL 1–5%); panel size (e.g., 25 or 35); and minimum number of subjects

  16. Pressure Testing of a Minimum Gauge PRSEUS Panel

    NASA Technical Reports Server (NTRS)

    Lovejoy, Andrew J.; Rouse, Marshall; Linton, Kim A.; Li, Victor P.

    2011-01-01

    Advanced aircraft configurations that have been developed to increase fuel efficiency require advanced, novel structural concepts capable of handling the unique load conditions that arise. One such concept is the Pultruded Rod Stitched Efficient Unitized Structure (PRSEUS) developed by the Boeing Company. The PRSEUS concept is being investigated by NASA s Environmentally Responsible Aviation (ERA) Program for use in a hybrid-wing body (HWB) aircraft. This paper summarizes the analysis and test of a PRSEUS panel subjected to internal pressure, the first such pressure test for this structural concept. The pressure panel used minimum gauge skin, with stringer and frame configurations consistent with previous PRSEUS tests. Analysis indicated that for the minimum gauge skin panel, the stringer locations exhibit fairly linear response, but the skin bays between the stringers exhibit nonlinear response. Excellent agreement was seen between nonlinear analysis and test results in the critical portion at the center of the panel. The pristine panel was capable of withstanding the required 18.4 psi pressure load condition without exhibiting any damage. The impacted panel was capable of withstanding a pressure load in excess of 28 psi before initial failure occurred at the center stringer, and the panel was capable of sustaining increased pressure load after the initial failure. This successful PRSEUS panel pressure panel test was a critical step in the building block approach for enabling the use of this advanced structural concept on future aircraft, such as the HWB.

  17. The International Confederation of Midwives: Global Standards for Midwifery Education (2010) with companion guidelines.

    PubMed

    Thompson, Joyce B; Fullerton, Judith T; Sawyer, Angela J

    2011-08-01

    a 2-year study was conducted to develop Global Standards for Midwifery Education in keeping with core documents of the International Confederation of Midwives. Elements of the standards were based on evidence available in the published and unpublished literature. Companion Guidelines to assist in implementing the standards were also developed. a modified Delphi survey process was conducted in two rounds following item validation by a panel of midwifery education experts. a global survey conducted in 88 countries. midwifery educators and clinicians associated with midwifery education located in any of the ICM member association countries. Additional participants included an Expert Midwifery Resource Group, other Key Stakeholders, midwifery regulators and policy makers. A total of 241 individuals from 46 ICM member association countries and ten non-member countries responded to one or both of the survey rounds. survey respondents expressed an opinion on whether to retain or to delete any of the proposed components of the standards. Version one had 109 proposed components and version two had 111 items for consideration. a majority consensus of .80 was required to accept an item without further deliberation. The Education Standards Task Force (expert panel) made final decisions in the four instances where this level of consensus was not reached, retaining all four items. The panel also amended the wording of selected items or added new items based on feedback received from survey respondents. The final document contains 10 Preface items, 35 glossary terms, and 37 discrete standards with 27 sub-sections. Copyright © 2011 Elsevier Ltd. All rights reserved.

  18. The ACT transport: Panacea for the 80's or designer's illusion (panel discussion)

    NASA Technical Reports Server (NTRS)

    1976-01-01

    A panel discussion was held which attempted to make an objective and pragmatic assessment of the standing of active control technology. The discussion focused on the standing of active control technology relative to civil air transport applications, the value as opposed to the cost of the projected benefits, the need for research, development, and demonstration, the role of government and industry in developing the technology, the major obstacles to its implementation, and the probable timing of the full utilization of active control technology in commercial transportation. An edited transcription of the prepared statements of the panel members and the subsequent open discussion between the panel and the audience is presented.

  19. Economic analysis of complementary, alternative, and integrative medicine: considerations raised by an expert panel.

    PubMed

    Coulter, Ian D; Herman, Patricia M; Nataraj, Shanthi

    2013-07-25

    An international panel of experts was convened to examine the challenges faced in conducting economic analyses of Complementary, Alternative and Integrative Medicine (CAIM). A one and a half-day panel of experts was convened in early 2011 to discuss what was needed to bring about robust economic analysis of CAIM. The goals of the expert panel were to review the current state of the science of economic evaluations in health, and to discuss the issues involved in applying these methods to CAIM, recognizing its unique characteristics. The panel proceedings were audiotaped and a thematic analysis was conducted independently by two researchers. The results were then discussed and differences resolved. This manuscript summarizes the discussions held by the panel members on each theme. The panel identified seven major themes regarding economic evaluation that are particularly salient to determining the economics of CAIM: standardization (in order to compare CAIM with conventional therapies, the same basic economic evaluation methods and framework must be used); identifying the question being asked, the audience targeted for the results and whose perspective is being used (e.g., the patient perspective is especially relevant to CAIM because of the high level of self-referral and out-of-pocket payment); the analytic methods to be used (e.g., the importance of treatment description and fidelity); the outcomes to be measured (e.g., it is important to consider a broad range of outcomes, particularly for CAIM therapies, which often treat the whole person rather than a specific symptom or disease); costs (e.g., again because of treating the whole person, the impact of CAIM on overall healthcare costs, rather than only disease-specific costs, should be measured); implementation (e.g., highlighting studies where CAIM allows cost savings may help offset its image as an "add on" cost); and generalizability (e.g., proper reporting can enable study results to be useful beyond the

  20. Developing a patient and family research advisory panel to include people with significant disease, multimorbidity and advanced age.

    PubMed

    Portalupi, Laura B; Lewis, Carmen L; Miller, Carl D; Whiteman-Jones, Kerry L; Sather, Kay A; Nease, Donald E; Matlock, Daniel D

    2017-06-01

    People who have experienced illness due to significant disease, multimorbidity and/or advanced age are high utilizers of the health care system. Yet this population has had little formal opportunity to participate in guiding the health care research agenda, and few mechanisms exist for researchers to engage this population in an efficient way. We describe the process of developing a standing patient and family advisory panel to incorporate this population's voice into research in the USA. The panel was created at the University of Colorado. Preliminary panel development consisted of a needs assessment, information gathering and participant recruitment. We collected feedback from researchers who consulted with the panel and from panel members in order to better understand the experience from the patient and family member perspective. The patient and family research advisory panel consists of eight advisors who have experience with significant disease, multimorbidity and/or advanced age, two physicians and a program manager. The panel meets every other month for 2 hours with the main purpose of advising diverse researchers on health care studies. People with significant disease, multimorbidity and/or advanced age represent a growing demographic in the USA, and their engagement in research is essential as the model of health care delivery moves from volume to value. © The Author 2017. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  1. 75 FR 62630 - Open Meeting of the Taxpayer Advocacy Panel Tax Forms and Publications/MLI Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-10-12

    ... DEPARTMENT OF THE TREASURY Internal Revenue Service Open Meeting of the Taxpayer Advocacy Panel Tax Forms and Publications/MLI Project Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Tax Forms and...

  2. 75 FR 39330 - Open Meeting of the Taxpayer Advocacy Panel Tax Forms and Publications/MLI Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-08

    ... DEPARTMENT OF THE TREASURY Internal Revenue Service Open Meeting of the Taxpayer Advocacy Panel Tax Forms and Publications/MLI Project Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Tax Forms and...

  3. 75 FR 55404 - Open Meeting of the Taxpayer Advocacy Panel Tax Forms and Publications/MLI Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-09-10

    ... DEPARTMENT OF THE TREASURY Internal Revenue Service Open Meeting of the Taxpayer Advocacy Panel Tax Forms and Publications/MLI Project Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Tax Forms and...

  4. The Warwick Agreement on femoroacetabular impingement syndrome (FAI syndrome): an international consensus statement.

    PubMed

    Griffin, D R; Dickenson, E J; O'Donnell, J; Agricola, R; Awan, T; Beck, M; Clohisy, J C; Dijkstra, H P; Falvey, E; Gimpel, M; Hinman, R S; Hölmich, P; Kassarjian, A; Martin, H D; Martin, R; Mather, R C; Philippon, M J; Reiman, M P; Takla, A; Thorborg, K; Walker, S; Weir, A; Bennell, K L

    2016-10-01

    The 2016 Warwick Agreement on femoroacetabular impingement (FAI) syndrome was convened to build an international, multidisciplinary consensus on the diagnosis and management of patients with FAI syndrome. 22 panel members and 1 patient from 9 countries and 5 different specialties participated in a 1-day consensus meeting on 29 June 2016. Prior to the meeting, 6 questions were agreed on, and recent relevant systematic reviews and seminal literature were circulated. Panel members gave presentations on the topics of the agreed questions at Sports Hip 2016, an open meeting held in the UK on 27-29 June. Presentations were followed by open discussion. At the 1-day consensus meeting, panel members developed statements in response to each question through open discussion; members then scored their level of agreement with each response on a scale of 0-10. Substantial agreement (range 9.5-10) was reached for each of the 6 consensus questions, and the associated terminology was agreed on. The term 'femoroacetabular impingement syndrome' was introduced to reflect the central role of patients' symptoms in the disorder. To reach a diagnosis, patients should have appropriate symptoms, positive clinical signs and imaging findings. Suitable treatments are conservative care, rehabilitation, and arthroscopic or open surgery. Current understanding of prognosis and topics for future research were discussed. The 2016 Warwick Agreement on FAI syndrome is an international multidisciplinary agreement on the diagnosis, treatment principles and key terminology relating to FAI syndrome.Author note The Warwick Agreement on femoroacetabular impingement syndrome has been endorsed by the following 25 clinical societies: American Medical Society for Sports Medicine (AMSSM), Association of Chartered Physiotherapists in Sports and Exercise Medicine (ACPSEM), Australasian College of Sports and Exercise Physicians (ACSEP), Austian Sports Physiotherapists, British Association of Sports and Exercise

  5. International Space Station (ISS)

    NASA Image and Video Library

    2002-10-09

    Back dropped against a blue and white Earth, the Space Shuttle Orbiter Atlantis was photographed by an Expedition 5 crew member onboard the International Space Station (ISS) during rendezvous and docking operations. Docking occurred at 10:17 am on October 9, 2002. The Starboard 1 (S1) Integrated Truss Structure, the primary payload of the STS-112 mission, can be seen in Atlantis' cargo bay. Installed and outfitted within 3 sessions of Extravehicular Activity (EVA) during the 11 day mission, the S1 truss provides structural support for the orbiting research facility's radiator panels, which use ammonia to cool the Station's complex power system. The S1 truss, attached to the S0 (S Zero) truss installed by the previous STS-110 mission, flows 637 pounds of anhydrous ammonia through three heat rejection radiators.

  6. Guidelines for Improving Entry Into and Retention in Care and Antiretroviral Adherence for Persons With HIV: Evidence-Based Recommendations From an International Association of Physicians in AIDS Care Panel

    PubMed Central

    Thompson, Melanie A.; Mugavero, Michael J.; Amico, K. Rivet; Cargill, Victoria A.; Chang, Larry W.; Gross, Robert; Orrell, Catherine; Altice, Frederick L.; Bangsberg, David R.; Bartlett, John G.; Beckwith, Curt G.; Dowshen, Nadia; Gordon, Christopher M.; Horn, Tim; Kumar, Princy; Scott, James D.; Stirratt, Michael J.; Remien, Robert H.; Simoni, Jane M.; Nachega, Jean B.

    2014-01-01

    Description After HIV diagnosis, timely entry into HIV medical care and retention in that care are essential to the provision of effective antiretroviral therapy (ART). ART adherence is among the key determinants of successful HIV treatment outcome and is essential to minimize the emergence of drug resistance. The International Association of Physicians in AIDS Care convened a panel to develop evidence-based recommendations to optimize entry into and retention in care and ART adherence for people with HIV. Methods A systematic literature search was conducted to produce an evidence base restricted to randomized, controlled trials and observational studies with comparators that had at least 1 measured biological or behavioral end point. A total of 325 studies met the criteria. Two reviewers independently extracted and coded data from each study using a standardized data extraction form. Panel members drafted recommendations based on the body of evidence for each method or intervention and then graded the overall quality of the body of evidence and the strength for each recommendation. Recommendations Recommendations are provided for monitoring of entry into and retention in care, interventions to improve entry and retention, and monitoring of and interventions to improve ART adherence. Recommendations cover ART strategies, adherence tools, education and counseling, and health system and service delivery interventions. In addition, they cover specific issues pertaining to pregnant women, incarcerated individuals, homeless and marginally housed individuals, and children and adolescents, as well as substance use and mental health disorders. Recommendations for future research in all areas are also provided. PMID:22393036

  7. Low Velocity Blunt Impact on Lightweight Composite Sandwich Panels

    NASA Astrophysics Data System (ADS)

    Chan, Monica Kar

    There is an increased desire to incorporate more composite sandwich structures into modern aircrafts. Because in-service aircrafts routinely experience impact damage during maintenance due to ground vehicle collision, dropped equipment, or foreign object damage (FOD) impact, it is necessary to understand their impact characteristics, particularly when blunt impact sources create internal damage with little or no external visibility. The objective of this investigation is to explore damage formation in lightweight composite sandwich panels due to low-velocity impacts of variable tip radius and energy level. The correlation between barely visible external dent formation and internal core damage was explored as a function of impact tip radius. A pendulum impactor was used to impact composite sandwich panels having honeycomb core while held in a 165 mm square window fixture. The panels were impacted by hardened steel tips with radii of 12.7, 25.4, 50.8, and 76.2 mm at energy levels ranging from 2 to 14 J. Experimental data showed little dependence of external dent depth on tip radius at very low energies of 2 to 6 J, and thus, there was also little variation in visibility due to tip radius. Four modes of internal core damage were identified. Internal damage span and depth were dependent on impact tip radius. Damage depth was also radius-dependent, but stabilized at constant depth independent of kinetic energy. Internal damage span increased with increasing impact energy, but not with increasing tip radius, suggesting a relationship between maximum damage tip radius with core density/size.

  8. The development of a core syllabus for the teaching of oral anatomy, histology, and embryology to dental students via an international 'Delphi Panel'.

    PubMed

    Moxham, Bernard John; McHanwell, Stephen; Berkovitz, Barry

    2018-03-01

    The formulation of core syllabuses for the biomedical sciences within medical and dental courses is partially driven by the need to cope with decreased time allocations for these subjects as a result of major curricular changes taking place worldwide. There is also a requirement to deal with the request for increased clinical relevance. In response to such demands, the International Federation of Associations of Anatomists (IFAA) is devising core syllabuses for the anatomical sciences relating to the education and training of both scientific and clinical professions. The process initially involves using Delphi Panels consisting of a team of anatomists, scientists, and clinicians who evaluate syllabus content in detail and accord each element/topic 'essential,' 'important,' 'acceptable,' or 'not required' status. Their conjectures, published on the IFAA website, provide merely a framework to enable other stakeholders to comment. The approach is international in scope, is conceptually 'democratic,' and is developmentally fluid in being readily available for amendment. The aim is to set internationally recognized standards and thus to provide guidelines concerning anatomical knowledge when engaged in course development. This article presents the deliberations of an IFAA Delphi Panel into a core syllabus for oral anatomy, histology, and embryology within the dental curriculum. Clin. Anat. 31:231-249, 2018. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

  9. Leveraging geospatial data, technology, and methods for improving the health of communities: priorities and strategies from an expert panel convened by the CDC.

    PubMed

    Elmore, Kim; Flanagan, Barry; Jones, Nicholas F; Heitgerd, Janet L

    2010-04-01

    In 2008, CDC convened an expert panel to gather input on the use of geospatial science in surveillance, research and program activities focused on CDC's Healthy Communities Goal. The panel suggested six priorities: spatially enable and strengthen public health surveillance infrastructure; develop metrics for geospatial categorization of community health and health inequity; evaluate the feasibility and validity of standard metrics of community health and health inequities; support and develop GIScience and geospatial analysis; provide geospatial capacity building, training and education; and, engage non-traditional partners. Following the meeting, the strategies and action items suggested by the expert panel were reviewed by a CDC subcommittee to determine priorities relative to ongoing CDC geospatial activities, recognizing that many activities may need to occur either in parallel, or occur multiple times across phases. Phase A of the action items centers on developing leadership support. Phase B focuses on developing internal and external capacity in both physical (e.g., software and hardware) and intellectual infrastructure. Phase C of the action items plan concerns the development and integration of geospatial methods. In summary, the panel members provided critical input to the development of CDC's strategic thinking on integrating geospatial methods and research issues across program efforts in support of its Healthy Communities Goal.

  10. Hybrid TE panel test results

    NASA Technical Reports Server (NTRS)

    Bifano, W. J.

    1972-01-01

    Test results are presented for a nine couple (3 x 3 array) thermoelectric panel of hybrid thermocouples. In the hybrid couple, a hollow cylinder of p-type Si-Ge is used to encapsulate a segmented PbTe/Si-Ge n-leg. The hybrid couple is predicted to offer a 10- to 15-percent improvement in performance relative to all Si-Ge couples. The efficiency, output power, and internal resistance of the panel as well as the resistances of the individual hybrid couples are presented as a function of test time covering a period of more than 2600 hours. Initial test results indicated hybrid couple performance consistent with design predictions. Extraneous resistance ranged from 20 to 25% of the hybrid couple thermoelectric resistance.

  11. 78 FR 69395 - Meeting of the Ocean Research Advisory Panel

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-19

    ...: Department of the Navy, DoD. ACTION: Notice of Open Meeting. SUMMARY: The Ocean Research Advisory Panel will hold a regularly scheduled meeting. The meeting will be open to the public. Members of the public who..., Arlington, VA 22203- 1995, telephone 703-696-4532. SUPPLEMENTARY INFORMATION: This notice of open meeting is...

  12. Conflict of Interest Policies and Industry Relationships of Guideline Development Group Members: A Cross-Sectional Study of Clinical Practice Guidelines for Depression.

    PubMed

    Cosgrove, Lisa; Krimsky, Sheldon; Wheeler, Emily E; Peters, Shannon M; Brodt, Madeline; Shaughnessy, Allen F

    2017-01-01

    Because of increased attention to the issue of trustworthiness of clinical practice guidelines, it may be that both transparency and management of industry associations of guideline development groups (GDGs) have improved. The purpose of the present study was to assess a) the disclosure requirements of GDGs in a cross-section of guidelines for major depression; and, b) the extent and type of conflicts of panel members. Treatment guidelines for major depression were identified and searched for conflict of interest policies and disclosure statements. Multi-modal screens for undeclared conflicts were also conducted. Fourteen guidelines with a total of 172 panel members were included in the analysis. Eleven of the 14 guidelines (78%) had a stated conflict of interest policy or disclosure statement, although the policies varied widely. Most (57%) of the guidelines were developed by panels that had members with industry financial ties to drug companies that manufacture antidepressant medication. However, only a minority of total panel members (18%) had such conflicts of interest. Drug company speakers bureau participation was the most common type of conflict. Although some progress has been made, organizations that develop guidelines should continue to work toward greater transparency and minimization of financial conflicts of interest.

  13. 75 FR 10789 - Meeting of the Uniform Formulary Beneficiary Advisory Panel

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-09

    ... written statements instead of addressing the Panel. Waiver Due to internal DoD difficulties, beyond the... closed to the public. Written Statements Pursuant to 41 CFR 102-3.105(j) and 102-3.140, the public or interested organizations may submit written statements to the membership of the Panel at any time or in...

  14. COTS Initiative Panel Discussion

    NASA Image and Video Library

    2013-11-13

    NASA Administrator Charles Bolden delivers remarks before a panel discussion on the Commercial Orbital Transportation Services (COTS) initiative at NASA Headquarters in Washington on Wednesday, November 13, 2013. Through COTS, NASA's partners Space Exploration Technologies Corp. (SpaceX) and Orbital Sciences Corp., developed new U.S. rockets and spacecraft, launched from U.S. soil, capable of transporting cargo to low-Earth orbit and the International Space Station. Photo Credit: (NASA/Jay Westcott)

  15. COTS Initiative Panel Discussion

    NASA Image and Video Library

    2013-11-13

    Gwynne Shotwell, President of SpaceX, delivers remarks panel discussion on the Commercial Orbital Transportation Services (COTS) initiative at NASA Headquarters in Washington on Wednesday, November 13, 2013. Through COTS, NASA's partners Space Exploration Technologies Corp. (SpaceX) and Orbital Sciences Corp., developed new U.S. rockets and spacecraft, launched from U.S. soil, capable of transporting cargo to low-Earth orbit and the International Space Station. Photo Credit: (NASA/Jay Westcott)

  16. Decadal Survey: Planetary Rings Panel

    NASA Astrophysics Data System (ADS)

    Gordon, M. K.; Cuzzi, J. N.; Lissauer, J. J.; Poulet, F.; Brahic, A.; Charnoz, S.; Ferrari, C.; Burns, J. A.; Nicholson, P. D.; Durisen, R. H.; Rappaport, N. J.; Spilker, L. J.; Yanamandra-Fisher, P.; Bosh, A. S.; Olkin, C.; Larson, S. M.; Graps, A. L.; Krueger, H.; Black, G. J.; Festou, M.; Karjalainen, R.; Salo, H. J.; Murray, C. D.; Showalter, M. R.; Dones, L.; Levison, H. F.; Namouni, F.; Araki, S.; Lewis, M. C.; Brooks, S.; Colwell, J. E.; Esposito, L. W.; Horanyi, M.; Stewart, G. R.; Krivov, A.; Schmidt, J.; Spahn, F.; Hamilton, D. P.; Giuliatti-Winter, S.; French, R. G.

    2001-11-01

    The National Research Council's Committee on Planetary and Lunar Exploration(COMPLEX) met earlier this year to begin the organization of a major activity, "A New Strategy for Solar System Exploration." Several members of the planetary rings community formed an ad hoc panel to discuss the current state and future prospects for the study of planetary rings. In this paper we summarize fundamental questions of ring science, list the key science questions expected to occupy the planetary rings community for the decade 2003-2013, outline the initiatives, missions, and other supporting activities needed to address those questions, and recommend priorities.

  17. Performance of different SNP panels for parentage testing in two East Asian cattle breeds.

    PubMed

    Strucken, E M; Gudex, B; Ferdosi, M H; Lee, H K; Song, K D; Gibson, J P; Kelly, M; Piper, E K; Porto-Neto, L R; Lee, S H; Gondro, C

    2014-08-01

    The International Society for Animal Genetics (ISAG) proposed a panel of single nucleotide polymorphisms (SNPs) for parentage testing in cattle (a core panel of 100 SNPs and an additional list of 100 SNPs). However, markers specific to East Asian taurine cattle breeds were not included, and no information is available as to whether the ISAG panel performs adequately for these breeds. We tested ISAG's core (100 SNP) and full (200 SNP) panels on two East Asian taurine breeds: the Korean Hanwoo and the Japanese Wagyu, the latter from the Australian herd. Even though the power of exclusion was high at 0.99 for both ISAG panels, the core panel performed poorly with 3.01% false-positive assignments in the Hanwoo population and 3.57% in the Wagyu. The full ISAG panel identified all sire-offspring relations correctly in both populations with 0.02% of relations wrongly excluded in the Hanwoo population. Based on these results, we created and tested two population-specific marker panels: one for the Wagyu population, which showed no false-positive assignments with either 100 or 200 SNPs, and a second panel for the Hanwoo, which still had some false-positive assignments with 100 SNPs but no false positives using 200 SNPs. In conclusion, for parentage assignment in East Asian cattle breeds, only the full ISAG panel is adequate for parentage testing. If fewer markers should be used, it is advisable to use population-specific markers rather than the ISAG panel. © 2014 Stichting International Foundation for Animal Genetics.

  18. Aerospace Safety Advisory Panel Annual Report February 1996

    NASA Technical Reports Server (NTRS)

    1996-01-01

    The Aerospace Safety Advisory Panel (ASAP) presents its annual report covering February through December 1995. Findings and recommendations include the areas of the Space Shuttle Program, the International Space Station, Aeronautics, and Other. Information to support these findings is included in this report. NASA's response to last year's annual report is included as an appendix. With regards to the Space Shuttle Program, the panel addresses the potential for safety problems due to organizational changes by increasing its scrutiny of Space Shuttle operations and planning.

  19. International aspirations for speech-language pathologists' practice with multilingual children with speech sound disorders: development of a position paper.

    PubMed

    McLeod, Sharynne; Verdon, Sarah; Bowen, Caroline

    2013-01-01

    A major challenge for the speech-language pathology profession in many cultures is to address the mismatch between the "linguistic homogeneity of the speech-language pathology profession and the linguistic diversity of its clientele" (Caesar & Kohler, 2007, p. 198). This paper outlines the development of the Multilingual Children with Speech Sound Disorders: Position Paper created to guide speech-language pathologists' (SLPs') facilitation of multilingual children's speech. An international expert panel was assembled comprising 57 researchers (SLPs, linguists, phoneticians, and speech scientists) with knowledge about multilingual children's speech, or children with speech sound disorders. Combined, they had worked in 33 countries and used 26 languages in professional practice. Fourteen panel members met for a one-day workshop to identify key points for inclusion in the position paper. Subsequently, 42 additional panel members participated online to contribute to drafts of the position paper. A thematic analysis was undertaken of the major areas of discussion using two data sources: (a) face-to-face workshop transcript (133 pages) and (b) online discussion artifacts (104 pages). Finally, a moderator with international expertise in working with children with speech sound disorders facilitated the incorporation of the panel's recommendations. The following themes were identified: definitions, scope, framework, evidence, challenges, practices, and consideration of a multilingual audience. The resulting position paper contains guidelines for providing services to multilingual children with speech sound disorders (http://www.csu.edu.au/research/multilingual-speech/position-paper). The paper is structured using the International Classification of Functioning, Disability and Health: Children and Youth Version (World Health Organization, 2007) and incorporates recommendations for (a) children and families, (b) SLPs' assessment and intervention, (c) SLPs' professional

  20. View of Kotov working with Debris Panels during EVA18

    NASA Image and Video Library

    2007-05-30

    ISS015-E-10043 (30 May 2007) --- Cosmonaut Oleg V. Kotov, Expedition 15 flight engineer representing Russia's Federal Space Agency, wearing a Russian Orlan spacesuit, participates in a session of extravehicular activity (EVA). Among other tasks, Kotov and cosmonaut Fyodor N. Yurchikhin (out of frame), commander representing Russia's Federal Space Agency, retrieved the "Christmas tree" bundle of three packages of 17 protective debris panels for installation around the forward cone of the Zvezda Service Module of the International Space Station and to install the first set of those panels. The aluminum debris protection panels are designed to shield the module from micro-meteoroids.

  1. 78 FR 57838 - North American Free Trade Agreement Binational Panel Reviews

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-09-20

    ... DEPARTMENT OF COMMERCE International Trade Administration [Secretariat File No. USA-MEX-2011- 1904... States Section, International Trade Administration, Department of Commerce. ACTION: Notice of completion of panel review of the Department of Commerce's final determination. SUMMARY: Pursuant to the...

  2. TWRS vadose zone contamination issue expert panel report

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Shafer, D.S.

    1997-05-01

    When members were first canvassed for participation in the Vadose Zone Expert Panel the stated purpose for convening the Panel was to review a controversial draft report, the SX Tank Farm Report. This report was produced by a DOE Grand Junction Project Office (GJPO) contractor, RUST Geotech, now MACTEC-ERS, for the DOE Richland Office (DOERL). Three meetings were planned for June, July and August, 1995 to review the draft report and to complete a Panel report by mid-September. The Expert Panel has found its efforts confounded by various non-technical issues. The Expert Panel has chosen to address some of themore » non-technical issues in this Preface rather than to dilute the technical discussion that follows in the body of this independent expert panel status report (Panel Report). Rather than performing a straightforward manuscript review, the Panel was asked to resolve conflicting interpretations of gamma-ray logging measurements performed in vadose zone boreholes (drywells) surrounding the high-level radioactive wastes of the SX tank farm. There are numerous and complex technical issues that must be evaluated before the vertical and radial extent of contaminant migration at the SX tank farm can be accurately assessed. When the Panel first met in early June, 1996, it quickly became apparent that the scientific and technical issues were obscured by policy and institutional affairs which have polarized discussion among various segments of the Hanford organization. This situation reflects the kinds of institutional problems described separately in reports by the National Research Council of the National Academy of Sciences (NAS/NRC), The Hanford Tanks Environmental Impacts and Policy Choices and BmTiers to Science: Technical Management of the Department of Energy Environmental Remediation Program. The Vadose Zone Characterization Program, appears to be caught between conflicting pressures and organizational mandates, some imposed from outside DOE-RL and some self

  3. COTS Initiative Panel Discussion

    NASA Image and Video Library

    2013-11-13

    Alan Lindenmoyer, Manager of Commercial Crew and Cargo Program at NASA, delivers remarks panel discussion on the Commercial Orbital Transportation Services (COTS) initiative at NASA Headquarters in Washington on Wednesday, November 13, 2013. Through COTS, NASA's partners Space Exploration Technologies Corp. (SpaceX) and Orbital Sciences Corp., developed new U.S. rockets and spacecraft, launched from U.S. soil, capable of transporting cargo to low-Earth orbit and the International Space Station. Photo Credit: (NASA/Jay Westcott)

  4. COTS Initiative Panel Discussion

    NASA Image and Video Library

    2013-11-13

    Phil McAlister, Director of Commercial Spaceflight Development at NASA, delivers remarks panel discussion on the Commercial Orbital Transportation Services (COTS) initiative at NASA Headquarters in Washington on Wednesday, November 13, 2013. Through COTS, NASA's partners Space Exploration Technologies Corp. (SpaceX) and Orbital Sciences Corp., developed new U.S. rockets and spacecraft, launched from U.S. soil, capable of transporting cargo to low-Earth orbit and the International Space Station. Photo Credit: (NASA/Jay Westcott)

  5. COTS Initiative Panel Discussion

    NASA Image and Video Library

    2013-11-13

    Frank Slazer, Vice President of Space Systems, Aerospace Industries Association, delivers remarks panel discussion on the Commercial Orbital Transportation Services (COTS) initiative at NASA Headquarters in Washington on Wednesday, November 13, 2013. Through COTS, NASA's partners Space Exploration Technologies Corp. (SpaceX) and Orbital Sciences Corp., developed new U.S. rockets and spacecraft, launched from U.S. soil, capable of transporting cargo to low-Earth orbit and the International Space Station. Photo Credit: (NASA/Jay Westcott)

  6. Commentary on the 2014 BP guidelines from the panel appointed to the Eighth Joint National Committee (JNC 8).

    PubMed

    Reisin, Efrain; Harris, Raymond C; Rahman, Mahboob

    2014-11-01

    The recently published article "2014 Evidence-based guideline for the management of high blood pressure in adults: Report from the panel members appointed to the Eighth Joint National Committee (JNC 8)" (James et al., JAMA 311: 507-520, 2014) has generated considerable controversy. In this commentary, we evaluate the document and compare the recommendations contained within it with those of the JNC 7 and other national and international guidelines. The evidence quality rating approach followed by the article "2014 Evidence-based guideline for the management of high blood pressure in adults: Report from the panel members appointed to the Eighth Joint National Committee (JNC 8)" (James et al., JAMA 311: 507-520, 2014) disqualified nearly 98% of previous studies from review; as a result, some of the key recommendations were on the basis of expert opinion alone. We are especially concerned that the recommendation to raise the systolic/diastolic BP levels at which treatment is initiated to ≥150/≥90 mmHg in adults≥60 years old may affect cardiovascular and renal health in these patients. Additionally, we recommend that hypertension guidelines should be updated every 3-4 years with a fresh approach to the definition of target BP levels, the use of modern technology in the diagnosis of hypertension, and the treatment of hypertension in special populations not addressed in earlier guidelines. Copyright © 2014 by the American Society of Nephrology.

  7. Heat exchanger panel

    NASA Technical Reports Server (NTRS)

    Warburton, Robert E. (Inventor); Cuva, William J. (Inventor)

    2005-01-01

    The present invention relates to a heat exchanger panel which has broad utility in high temperature environments. The heat exchanger panel has a first panel, a second panel, and at least one fluid containment device positioned intermediate the first and second panels. At least one of the first panel and the second panel have at least one feature on an interior surface to accommodate the at least one fluid containment device. In a preferred embodiment, each of the first and second panels is formed from a high conductivity, high temperature composite material. Also, in a preferred embodiment, the first and second panels are joined together by one or more composite fasteners.

  8. Introduction and Overview of the Industrial Interactive Panel Session

    NASA Astrophysics Data System (ADS)

    Seiler, David

    2014-03-01

    A unique industrial panel covering the challenges and needs of various industries and how being innovative is important. The session involves two invited industry speakers (24 minutes each) who will set the stage for the interactive round table panel session. The Panel, led by moderator Mark Bernius (Morgan Advanced Materials), consists of the two invited speakers plus an additional five industry panelists. The first thirty minutes of the panel session has the five additional panelists introducing themselves and their work/company. These introductions could include what they or their company does, sharing one or two technical highlights, listing some challenges or needs for physicists, and what innovation breakthroughs are needed in their industries. The final hour of the session will be highly interactive with questions to the panel coming from the moderator, the audience, and the panelists themselves. Questions that might be addressed include: how physicists are or could be critical in advancing innovation; how can AIP/APS/FIAP help industry get the physics help they need to be innovative (knowledge, the right staff, etc.); what role can students and post docs play in advancing industry's mission; etc. We invite you to participate in this interactive session and ask our industry experts your own interesting and challenging questions. The invited speakers are George Thompson, Intel, and Rick Watkins, Nike. The panel members also include Jason Cleveland, Asylum Research; Robert Doering, Texas Instruments; William Gallagher, IBM T.J. Watson Research Center; James Hollenhorst, Agilent Technologies; and Martin Poitzsch, Schlumberger-Doll Research.

  9. 78 FR 36302 - Open Meeting of the Taxpayer Advocacy Panel Taxpayer Communications Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-17

    ... Taxpayer Communications Project Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice... Communications Project Committee will be conducted. The Taxpayer Advocacy Panel is soliciting public comments... Taxpayer Advocacy Panel Taxpayer Communications Project Committee will be held Thursday, July 18, 2013, at...

  10. 78 FR 48230 - Open Meeting of the Taxpayer Advocacy Panel Taxpayer Communications Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-07

    ... Taxpayer Communications Project Committee AGENCY: Internal Revenue Service (IRS) Treasury. ACTION: Notice of Meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Taxpayer Communications Project... Taxpayer Advocacy Panel Taxpayer Communications Project Committee will be held Thursday, September 19, 2013...

  11. 78 FR 69940 - Open Meeting of the Taxpayer Advocacy Panel Taxpayer Communications Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-21

    ... Taxpayer Communications Project Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Taxpayer Communications Project... Taxpayer Advocacy Panel Taxpayer Communications Project Committee will be held Thursday, December 19, 2013...

  12. The utility of online panel surveys versus computer-assisted interviews in obtaining substance-use prevalence estimates in the Netherlands.

    PubMed

    Spijkerman, Renske; Knibbe, Ronald; Knoops, Kim; Van De Mheen, Dike; Van Den Eijnden, Regina

    2009-10-01

    Rather than using the traditional, costly method of personal interviews in a general population sample, substance-use prevalence rates can be derived more conveniently from data collected among members of an online access panel. To examine the utility of this method, we compared the outcomes of an online survey with those obtained with the computer-assisted personal interviews (CAPI) method. Data were gathered from a large sample of online panellists and in a two-stage stratified sample of the Dutch population using the CAPI method. The Netherlands. Participants  The online sample comprised 57 125 Dutch online panellists (15-64 years) of Survey Sampling International LLC (SSI), and the CAPI cohort 7204 respondents (15-64 years). All participants answered identical questions about their use of alcohol, cannabis, ecstasy, cocaine and performance-enhancing drugs. The CAPI respondents were asked additionally about internet access and online panel membership. Both data sets were weighted statistically according to the distribution of demographic characteristics of the general Dutch population. Response rates were 35.5% (n = 20 282) for the online panel cohort and 62.7% (n = 4516) for the CAPI cohort. The data showed almost consistently lower substance-use prevalence rates for the CAPI respondents. Although the observed differences could be due to bias in both data sets, coverage and non-response bias were higher in the online panel survey. Despite its economic advantage, the online panel survey showed stronger non-response and coverage bias than the CAPI survey, leading to less reliable estimates of substance use in the general population. © 2009 The Authors. Journal compilation © 2009 Society for the Study of Addiction.

  13. Solar Array Panels and Earths Horizon during Expedition 13

    NASA Image and Video Library

    2006-07-24

    ISS013-E-64485 (24 July 2006) --- Earth's horizon and station solar array panels are featured in this image photographed by an Expedition 13 crewmember from a window on the International Space Station.

  14. QT Interval Screening in Methadone Maintenance Treatment: Report of a SAMHSA Expert Panel

    PubMed Central

    Martin, Judith A.; Campbell, Anthony; Killip, Thomas; Kotz, Margaret; Krantz, Mori J.; Kreek, Mary Jeanne; McCarroll, Brian A.; Mehta, Davendra; Payte, J. Thomas; Stimmel, Barry; Taylor, Trusandra; Wilford, Bonnie B.

    2014-01-01

    In an effort to enhance patient safety in Opioid Treatment Programs (OTPs), the Substance Abuse and Mental Health Services Administration (SAMHSA) convened a multi-disciplinary Expert Panel on the Cardiac Effects of Methadone. Panel members reviewed the literature, regulatory actions, professional guidances, and OTPs’ experiences regarding adverse cardiac events associated with methadone. The Panel concluded that, to the extent possible, every OTP should have a universal Cardiac Risk Management Plan (incorporating clinical assessment, ECG assessment, risk stratification, and prevention of drug interactions) for all patients, and should strongly consider patient-specific risk minimization strategies (such as careful patient monitoring, obtaining ECGs as indicated by a particular patient’s risk profile, and adjusting the methadone dose as needed) for patients with identified risk factors for adverse cardiac events. The Panel also suggested specific modifications to informed consent documents, patient education, staff education, and methadone protocols. PMID:22026519

  15. JTEC Panel report on electronic manufacturing and packaging in Japan

    NASA Technical Reports Server (NTRS)

    Kelly, Michael J.; Boulton, William R. (Editor); Kukowski, John; Meieran, Gene; Pecht, Michael; Peeples, John; Tummala, Rao; Dehaemer, Michael J.; Holdridge, Geoff (Editor); Gamota, George

    1995-01-01

    This report summarizes the status of electronic manufacturing and packaging technology in Japan in comparison to that in the United States, and its impact on competition in electronic manufacturing in general. In addition to electronic manufacturing technologies, the report covers technology and manufacturing infrastructure, electronics manufacturing and assembly, quality assurance and reliability in the Japanese electronics industry, and successful product realization strategies. The panel found that Japan leads the United States in almost every electronics packaging technology. Japan clearly has achieved a strategic advantage in electronics production and process technologies. Panel members believe that Japanese competitors could be leading U.S. firms by as much as a decade in some electronics process technologies.

  16. Payload advisory panel recommendations

    NASA Technical Reports Server (NTRS)

    Moore, Berrien, III

    1991-01-01

    The Payload Advisory Panel proposes a restructured Earth Observing System (EOS) mission to address high-priority science and environmental policy issues in Earth System Science. These issues have been identified through studies conducted by the Intergovernmental Panel on Climate Change (IPCC), the United States Environmental Protection Agency (EPA), and the Committee on Earth and Environmental Sciences (CEES). The restructured EOS defers efforts to improve the understanding of the middle and upper stratosphere and solid earth geophysics. The strategy of the mission combines high priority new measurements with continuation of critical data sets begun by missions which precede EOS. Collaborative arrangements with international partners are an essential part of the program and additional arrangements are posed. The need for continuity in Earth observations and the urgency of environmental questions require launch of some EOS elements as soon as possible. They further require maintenance of the EOS objective of obtaining consistent 15-year measurement records.

  17. Payload advisory panel recommendations

    NASA Astrophysics Data System (ADS)

    Moore, Berrien, III

    1991-11-01

    The Payload Advisory Panel proposes a restructured Earth Observing System (EOS) mission to address high-priority science and environmental policy issues in Earth System Science. These issues have been identified through studies conducted by the Intergovernmental Panel on Climate Change (IPCC), the United States Environmental Protection Agency (EPA), and the Committee on Earth and Environmental Sciences (CEES). The restructured EOS defers efforts to improve the understanding of the middle and upper stratosphere and solid earth geophysics. The strategy of the mission combines high priority new measurements with continuation of critical data sets begun by missions which precede EOS. Collaborative arrangements with international partners are an essential part of the program and additional arrangements are posed. The need for continuity in Earth observations and the urgency of environmental questions require launch of some EOS elements as soon as possible. They further require maintenance of the EOS objective of obtaining consistent 15-year measurement records.

  18. 78 FR 78517 - Open Meeting of the Taxpayer Advocacy Panel Taxpayer Communications Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-26

    ... Taxpayer Communications Project Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of Meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Taxpayer Communications Project... Panel Taxpayer Communications Project Committee will be held Thursday, January 23, 2014, at 2:00 p.m...

  19. 78 FR 64063 - Open Meeting of the Taxpayer Advocacy Panel Taxpayer Communications Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-10-25

    ... Taxpayer Communications Project Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Taxpayer Communications Project... Panel Taxpayer Communications Project Committee will be held Thursday, November 21, 2013, at 2:00 p.m...

  20. 78 FR 3501 - Open Meeting of the Taxpayer Advocacy Panel Taxpayer Communications Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-01-16

    ... Taxpayer Communications Project Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Taxpayer Communications Project... Panel Taxpayer Communications Project Committee will be held Thursday, February 21, 2013 at 2:00 p.m...

  1. 78 FR 56270 - Open Meeting of the Taxpayer Advocacy Panel Taxpayer Communications Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-09-12

    ... Taxpayer Communications Project Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Taxpayer Communications Project... Panel Taxpayer Communications Project Committee will be held Thursday, October 17, 2013, at 2:00 p.m...

  2. 77 FR 74920 - Open Meeting of the Taxpayer Advocacy Panel Taxpayer Communications Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-12-18

    ... Taxpayer Communications Project Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Taxpayer Communications Project... Panel Taxpayer Communications Project Committee will be held Thursday, January 17, 2013 from 2:00 p.m...

  3. 78 FR 41193 - Open Meeting of the Taxpayer Advocacy Panel Taxpayer Communications Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-09

    ... Taxpayer Communications Project Committee AGENCY: Internal Revenue Service (IRS) Treasury. ACTION: Notice of Meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Taxpayer Communications Project... Panel Taxpayer Communications Project Committee will be held Thursday, August 15, 2013, at 2:00 p.m...

  4. 77 FR 37101 - Open Meeting of the Taxpayer Advocacy Panel Bankruptcy Compliance Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-20

    ... Bankruptcy Compliance Project Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Bankruptcy Compliance Project Committee will be conducted. The Taxpayer Advocacy Panel is soliciting public comments, ideas, and suggestions on...

  5. 77 FR 47165 - Open Meeting of the Taxpayer Advocacy Panel Bankruptcy Compliance Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-07

    ... Bankruptcy Compliance Project Committee AGENCY: Internal Revenue Service (IRS) Treasury. ACTION: Notice of meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Bankruptcy Compliance Project Committee will be conducted. The Taxpayer Advocacy Panel is soliciting public comments, ideas, and suggestions on...

  6. Creep Behavior of Structural Insulated Panels (SIPS): Results from a Pilot Study

    Treesearch

    Dwight McDonald; Marshall Begel; C. Adam Senalik; Robert Ross; Thomas D. Skaggs; Borjen Yeh; Thomas Williamson

    2014-01-01

    Structural insulated panels (SIPs) have been recognized as construction materials in the International Residential Code (IRC) since 2009. Although most SIPs are used in wall applications, they can also be used as roof or floor panels that are subjected to long-term transverse loading, for which SIP creep performance may be critical in design. However, limited...

  7. 75 FR 51285 - In the Matter of Certain Flat Panel Digital Televisions and Components Thereof; Notice of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-19

    ... INTERNATIONAL TRADE COMMISSION [Inv. No. 337-TA-733] In the Matter of Certain Flat Panel Digital... importation, and the sale within the United States after importation of certain flat panel digital televisions... sale within the United States after importation of certain flat panel digital televisions and...

  8. Updated Panel-Method Computer Program

    NASA Technical Reports Server (NTRS)

    Ashby, Dale L.

    1995-01-01

    Panel code PMARC_12 (Panel Method Ames Research Center, version 12) computes potential-flow fields around complex three-dimensional bodies such as complete aircraft models. Contains several advanced features, including internal mathematical modeling of flow, time-stepping wake model for simulating either steady or unsteady motions, capability for Trefftz computation of drag induced by plane, and capability for computation of off-body and on-body streamlines, and capability of computation of boundary-layer parameters by use of two-dimensional integral boundary-layer method along surface streamlines. Investigators interested in visual representations of phenomena, may want to consider obtaining program GVS (ARC-13361), General visualization System. GVS is Silicon Graphics IRIS program created to support scientific-visualization needs of PMARC_12. GVS available separately from COSMIC. PMARC_12 written in standard FORTRAN 77, with exception of NAMELIST extension used for input.

  9. 77 FR 1677 - FIFRA Scientific Advisory Panel; Notice of Public Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-01-11

    ... serve as ad hoc members of the FIFRA SAP for this meeting. As part of a broader process for developing a... overall balance of different scientific perspectives on the panel. In order to have the collective breadth... populations dropped dramatically during the mid-20th century. The United States is one of many countries now...

  10. 76 FR 77892 - Open Meeting of the Taxpayer Advocacy Panel Refund Processing Communications Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-12-14

    ... Refund Processing Communications Project Committee AGENCY: Internal Revenue Service (IRS) Treasury... Communications Project Committee will be conducted. The Taxpayer Advocacy Panel is soliciting public comments... the Taxpayer Advocacy Panel Refund Processing Communications Project Committee will be held Tuesday...

  11. An evaluation of the International Society for Animal Genetics recommended parentage and identification panel for the domestic pigeon (Columba livia domestica).

    PubMed

    de Groot, M; van Haeringen, W A

    2017-08-01

    In this study, the International Society for Animal Genetics (ISAG) recommended panel for the identification of the domestic pigeon (Columba livia domestica) is characterized based on commonly used statistical parameters. The marker panel is based on 16 short tandem repeat (STR) loci (PIGN15, PIGN10, PIGN57, PIGN26, CliμD16, CliμD19, PIGN12, CliμD17, CliμT17, PIGN04, CliμD01, CliμD11, CliμD35, CliμT02, CliμT13, CliμT43). The alleles of the 16 loci consist of a mixture of tri-, tetra-, penta- and hexameric repeat patterns. A sex determination marker was included in the multiplex for quality control. The repeat sequence of the PIGN markers was previously unpublished and therefore sequenced to reveal the sequence pattern. In total, 1421 pigeons were genotyped on 16 STR loci to generate allele frequency data for each locus. For all 16 markers combined, a PE1 (combined non-exclusion probability, first parent) of 0.9986 and PE2 (combined non-exclusion probability, second parent) of >0.9999 was observed. Comparing the alleged father and mother, a PE value of >0.9999 was observed. Two of the markers, CliμD19 and PIGN12, were found to have relatively high Hardy-Weinberg equilibrium and F(null) values. Therefore these markers may be considered to be replaced by other STRs. Another point of discussion may be to add a gender identification marker to the recommended ISAG panel. Not only can this serve as an extra identification marker, but this can also confirm the sex of a sample, because it is challenging to determine the sex based on phenotypical characteristics, especially for chicks. In conclusion, the set of 16 STR markers can be used in routine parentage verification and the identification of individuals. © 2017 Stichting International Foundation for Animal Genetics.

  12. 77 FR 61053 - Open Meeting of the Taxpayer Advocacy Panel Refund Processing Communications Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-05

    ... Refund Processing Communications Project Committee AGENCY: Internal Revenue Service (IRS), Treasury... Communications Project Committee will be conducted. The Taxpayer Advocacy Panel is soliciting public comments... Advocacy Panel Refund Processing Communications Project Committee will be held Thursday, November 1, 2012...

  13. 77 FR 2610 - Open Meeting of the Taxpayer Advocacy Panel Refund Processing Communications Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-01-18

    ... Refund Processing Communications Project Committee AGENCY: Internal Revenue Service (IRS) Treasury... Communications Project Committee will be conducted. The Taxpayer Advocacy Panel is soliciting public comments... Advocacy Panel Refund Processing Communications Project Committee will be held Thursday, February 2, 2012...

  14. 77 FR 8327 - Open Meeting of the Taxpayer Advocacy Panel Refund Processing Communications Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-14

    ... Refund Processing Communications Project Committee AGENCY: Internal Revenue Service (IRS) Treasury... Communications Project Committee will be conducted. The Taxpayer Advocacy Panel is soliciting public comments... Taxpayer Advocacy Panel Refund Processing Communications Project Committee will be held Thursday, March 01...

  15. 77 FR 47165 - Open Meeting of the Taxpayer Advocacy Panel Refund Processing Communications Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-07

    ... Refund Processing Communications Project Committee AGENCY: Internal Revenue Service (IRS) Treasury... Communications Project Committee will be conducted. The Taxpayer Advocacy Panel is soliciting public comments... Advocacy Panel Refund Processing Communications Project Committee will be held Thursday, September 6, 2012...

  16. SEALING MEANS FOR RELATIVELY ROTATABLE MEMBERS

    DOEpatents

    Skarstrom, C.S.

    1960-10-25

    A sealing means is offered for maintaining a seal between a pair of relatively rotatable members, panticularly between a rotating shaft and a stationary member surrounding the shaft. The sealing is accomplished by means of a flange extending outward radially on each of a plurality of sealing rings mounted on the rotating member which fit into annular grooves in the stationary member and are held in sealing relation therewith by means of spring rings. In addition, means are provided for passing a sealing gas through the seal sunfaces to prevent accumulation of lubricant and for scavenging any gas which may have leaked from the internal member into the seal area.

  17. 19 CFR 122.75b - Electronic manifest requirement for crew members and non-crew members onboard commercial aircraft...

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... Record locator, if available; (xv) International Air Transport Association (IATA) departure port code... authorized by law. (f) Master crew member and non-crew member lists. Air carriers subject to the requirements... THE TREASURY AIR COMMERCE REGULATIONS Documents Required for Clearance and Permission To Depart...

  18. 19 CFR 122.75b - Electronic manifest requirement for crew members and non-crew members onboard commercial aircraft...

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... Record locator, if available; (xv) International Air Transport Association (IATA) departure port code... authorized by law. (f) Master crew member and non-crew member lists. Air carriers subject to the requirements... THE TREASURY AIR COMMERCE REGULATIONS Documents Required for Clearance and Permission To Depart...

  19. 19 CFR 122.75b - Electronic manifest requirement for crew members and non-crew members onboard commercial aircraft...

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... Record locator, if available; (xv) International Air Transport Association (IATA) departure port code... authorized by law. (f) Master crew member and non-crew member lists. Air carriers subject to the requirements... THE TREASURY AIR COMMERCE REGULATIONS Documents Required for Clearance and Permission To Depart...

  20. Diffractive flat panel solar concentrators of a novel design.

    PubMed

    de Jong, Ties M; de Boer, Dick K G; Bastiaansen, Cees W M

    2016-07-11

    A novel design for a flat panel solar concentrator is presented which is based on a light guide with a grating applied on top that diffracts light into total internal reflection. By combining geometrical and diffractive optics the geometrical concentration ratio is optimized according to the principles of nonimaging optics, while the thickness of the device is minimized due to the use of total internal reflection.

  1. 7 CFR 1940.968 - Rural Economic Development Review Panel Grant (Panel Grant).

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 13 2013-01-01 2013-01-01 false Rural Economic Development Review Panel Grant (Panel... of Certain Rural Development Programs § 1940.968 Rural Economic Development Review Panel Grant (Panel... associated with a State rural economic development review panel. (b) Objective. The objective of the Panel...

  2. Maximizing the Utility of the Serum Repository With Current Technologies and Recommendations to Meet Future Needs: Report of the Technical Panel.

    PubMed

    Baird, Coleen P

    2015-10-01

    The Department of Defense Serum Repository (DoDSR) of the Armed Forces Health Surveillance Center (AFHSC), Silver Spring, Maryland, has over 55 million specimens. Over 80% of these specimens are linked to individual health data. In response to Congressional and Department of Defense (DoD) concern about toxic exposures of deployed Service members and rapidly developing laboratory capabilities that may identify those exposed, the AFHSC hosted two panels in 2013. The first, the Needs Panel, focused on assessing the needs of the DoD that may be met using the current DoDSR and an enhanced repository. The second panel, the Technical Panel, focused on identifying the emerging laboratory technologies that are or will be available to DoD public health workers and researchers. This report summarizes the recommendations of the Technical Panel, to include identified gaps in the ability of the current DoDSR to address questions of interest to the DoD, the availability of laboratory technology to address these needs, and the types and quality of specimens required from Service members possibly exposed. Reprint & Copyright © 2015 Association of Military Surgeons of the U.S.

  3. What are fair study benefits in international health research? Consulting community members in Kenya.

    PubMed

    Njue, Maureen; Kombe, Francis; Mwalukore, Salim; Molyneux, Sassy; Marsh, Vicki

    2014-01-01

    Planning study benefits and payments for participants in international health research in low- income settings can be a difficult and controversial process, with particular challenges in balancing risks of undue inducement and exploitation and understanding how researchers should take account of background inequities. At an international health research programme in Kenya, this study aimed to map local residents' informed and reasoned views on the effects of different levels of study benefits and payments to inform local policy and wider debates in international research. Using a relatively novel two-stage process community consultation approach, five participatory workshops involving 90 local residents from diverse constituencies were followed by 15 small group discussions, with components of information-sharing, deliberation and reflection to situate normative reasoning within debates. Framework Analysis drew inductively and deductively on voice-recorded discussions and field notes supported by Nvivo 10 software, and the international research ethics literature. Community members' views on study benefits and payments were diverse, with complex contextual influences and interplay between risks of giving 'too many' and 'too few' benefits, including the role of cash. While recognising important risks for free choice, research relationships and community values in giving 'too many', the greatest concerns were risks of unfairness in giving 'too few' benefits, given difficulties in assessing indirect costs of participation and the serious consequences for families of underestimation, related to perceptions of researchers' responsibilities. Providing benefits and payments to participants in international research in low-income settings is an essential means by which researchers meet individual-level and structural forms of ethical responsibilities, but understanding how this can be achieved requires a careful account of social realities and local judgment. Concerns

  4. Interactive optical panel

    DOEpatents

    Veligdan, J.T.

    1995-10-03

    An interactive optical panel assembly includes an optical panel having a plurality of ribbon optical waveguides stacked together with opposite ends thereof defining panel first and second faces. A light source provides an image beam to the panel first face for being channeled through the waveguides and emitted from the panel second face in the form of a viewable light image. A remote device produces a response beam over a discrete selection area of the panel second face for being channeled through at least one of the waveguides toward the panel first face. A light sensor is disposed across a plurality of the waveguides for detecting the response beam therein for providing interactive capability. 10 figs.

  5. 75 FR 51465 - Medicare Program; Announcement of Five New Members to the Advisory Panel on Ambulatory Payment...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-20

    ... Panel. This expertise encompasses hospital payment systems; hospital medical-care delivery systems; provider billing systems; APC groups, Current Procedural Terminology codes, and alpha-numeric Healthcare Common Procedure Coding System codes; and the use of, and payment for, drugs and medical devices in the...

  6. 77 FR 30590 - Open meeting of the Taxpayer Advocacy Panel Toll-Free Project Committee.

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-23

    ... Toll-Free Project Committee. AGENCY: Internal Revenue Service (IRS) Treasury. ACTION: Notice of meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Toll-Free Project Committee will be conducted. The.... (1988) that an open meeting of the Taxpayer Advocacy Panel Toll-Free Project Committee will be held...

  7. 77 FR 37102 - Open Meeting of the Taxpayer Advocacy Panel Toll-Free Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-20

    ... Toll-Free Project Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Toll-Free Project Committee will be conducted. The.... (1988) that an open meeting of the Taxpayer Advocacy Panel Toll-Free Project Committee will be held...

  8. 78 FR 15125 - Open Meeting of the Taxpayer Advocacy Panel Taxpayer Communications Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-08

    ... suggestions on improving customer service at the Internal Revenue Service. DATES: The meeting will be held... DEPARTMENT OF THE TREASURY Internal Revenue Service Open Meeting of the Taxpayer Advocacy Panel Taxpayer Communications Project Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice...

  9. 77 FR 8328 - Open Meeting of the Taxpayer Advocacy Panel Bankruptcy Compliance Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-14

    ... improving customer service at the Internal Revenue Service. DATES: The meeting will be held Tuesday, March... DEPARTMENT OF THE TREASURY Internal Revenue Service Open Meeting of the Taxpayer Advocacy Panel Bankruptcy Compliance Project Committee AGENCY: Internal Revenue Service (IRS) Treasury. ACTION: Notice of...

  10. 77 FR 61054 - Open Meeting of the Taxpayer Advocacy Panel Bankruptcy Compliance Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-05

    ... improving customer service at the Internal Revenue Service. DATES: The meeting will be held Tuesday... DEPARTMENT OF THE TREASURY Internal Revenue Service Open Meeting of the Taxpayer Advocacy Panel Bankruptcy Compliance Project Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of...

  11. 75 FR 11998 - Open Meeting of the Taxpayer Advocacy Panel Taxpayer Assistance Center Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-12

    ... improving customer service at the Internal Revenue Service. DATES: The meeting will be held Tuesday, April... DEPARTMENT OF THE TREASURY Internal Revenue Service Open Meeting of the Taxpayer Advocacy Panel Taxpayer Assistance Center Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of...

  12. 78 FR 11277 - Open Meeting of the Taxpayer Advocacy Panel Taxpayer Communications Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-15

    ... suggestions on improving customer service at the Internal Revenue Service. DATES: The meeting will be held... DEPARTMENT OF THE TREASURY Internal Revenue Service Open Meeting of the Taxpayer Advocacy Panel Taxpayer Communications Project Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice...

  13. 75 FR 4137 - Open Meeting of the Taxpayer Advocacy Panel Taxpayer Assistance Center Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-01-26

    ... improving customer service at the Internal Revenue Service. DATES: The meeting will be held Tuesday... DEPARTMENT OF THE TREASURY Internal Revenue Service Open Meeting of the Taxpayer Advocacy Panel Taxpayer Assistance Center Committee AGENCY: Internal Revenue Service (IRS) Treasury. ACTION: Notice of...

  14. 77 FR 55526 - Open Meeting of the Taxpayer Advocacy Panel Refund Processing Communications Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-10

    ... Refund Processing Communications Project Committee AGENCY: Internal Revenue Service (IRS), Treasury... Communications Project Committee will be conducted. The Taxpayer Advocacy Panel is soliciting public comments... Panel Refund Processing Communications Project Committee will be held Thursday, October 4, 2012 at 2 p.m...

  15. 77 FR 40410 - Open Meeting of the Taxpayer Advocacy Panel Refund Processing Communications Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-09

    ... Refund Processing Communications Project Committee AGENCY: Internal Revenue Service (IRS), Treasury... Communications Project Committee will be conducted. The Taxpayer Advocacy Panel is soliciting public comments... Panel Refund Processing Communications Project Committee will be held Thursday, August 2, 2012 at 2:00 p...

  16. Improved panels for clinical immune phenotyping: Utilization of the violet laser.

    PubMed

    Ryherd, Mark; Plassmeyer, Matthew; Alexander, Connor; Eugenio, Ines; Kleschenko, Yuliya; Badger, Ariel; Gupta, Raavi; Alpan, Oral; Sønder, Søren Ulrik

    2017-05-10

    Clinical diagnostic laboratories are subject to numerous regulations imposed by government agencies. Laboratory developed tests for flow cytometry panels are essentially restricted to the use of analyte-specific reagents (ASR) antibodies. With the advances in clinical flow cytometry systems, there is a trend toward the utilization of blue/red/violet laser flow systems and 8 to 10-color panels. Currently, the selection of commercially available ASR antibodies for the violet laser is very limited. The market is dominated by Brilliant Violet 421 (BV421) manufactured by BD Biosciences and Pacific Blue (PB) manufactured by Beckman Coulter. In this study, we compare BV421 and PB conjugated ASR antibodies. Whole blood was stained and acquired on a Gallios flow cytometer system. For single color staining, the stain index (SI) was calculated. For the two panels, the compensation matrix was calculated and the performance of the antibody cocktails analyzed in FCS Express. The results show that five out of six tested BV421 conjugated antibodies have significantly higher SI than their PB counterparts. Furthermore, BV421 antibodies require less compensation for spillover than PB. Finally, BV421 conjugated antibodies give better separation between negative and positive populations in the context of an 8 and 10 color panel without affecting the intensity of the other dyes. Overall, using BV421 conjugated antibodies results in better separation between populations compared to PB conjugated antibodies without negatively affecting other fluorochromes in our panels. We conclude that the BV421 conjugated ASR antibodies are currently the better available option for clinical flow panels. © 2017 International Clinical Cytometry Society. © 2017 International Clinical Cytometry Society.

  17. Health monitoring of precast bridge deck panels reinforced with glass fiber reinforced polymer (GFRP) bars.

    DOT National Transportation Integrated Search

    2012-03-01

    The present research project investigates monitoring concrete precast panels for bridge decks that are reinforced with Glass Fiber Reinforced Polymer (GFRP) bars. Due to the lack of long term research on concrete members reinforced with GFRP bars, lo...

  18. Life testing of a nine-couple hybrid thermoelectric panel

    NASA Technical Reports Server (NTRS)

    Bifano, W. J.

    1973-01-01

    Life test data are presented for a nine couple thermoelectric panel of hybrid couples tested at an average hot junction temperature of 840 C (1113 K). In the hybrid couple, a hollow cylinder of p-type Si-Ge is used to encapsulate a segmented PbTe/Si-Ge n-leg. The output power and internal resistance of the panel as well as the resistances of the individual hybrid couples are presented as functions of test time covering a period of more than 4200 hours. Test results indicated improved stability relative to hybrid couples tested at higher temperatures. Thermal cycling of the panel resulted in an order of magnitude increase in room temperature resistance. However, very little change in resistance at operating temperatures was noted following the thermal cycles.

  19. Observations from the AAMC advisory panel on biomedical research.

    PubMed

    Cohen, D H

    1991-10-01

    The author gives a brief history of the events that led to the establishment of the Association of American Medical Colleges (AAMC) Advisory Panel on Biomedical Research, describes some of its early activities, and discusses some of the issues that the biomedical research community is facing. Specifically, he describes how the competition for research funding that became particularly intense in 1989-90 eroded the well-orchestrated coalition approach to appropriations that had been the norm. Another disturbing development was a growing tension between research faculty and the administrators of their institutions. To address these problems, the author, under the aegis of the AAMC, convened a series of workshops during the summer of 1990 to provide a forum for airing concerns and allowing different groups to become aware of each other's positions and perceptions. These workshops were quite useful and helped in framing some important issues. Also deriving from the workshops was the recognition that a continuing advisory group on research policy was needed; thus the AAMC advisory panel was created. The author describes its unusual characteristics and its importance. Subcommittees were later established to facilitate the effectiveness of the panel. Early in the panel's deliberations it became clear that it was important to bring into the meeting various knowledgeable individuals to educate and interact with panel members. The author concludes by surveying the larger picture of the public's eroding confidence in research universities and higher education in general, the punitive environment that this has created in Congress, the increasingly harsh economic situation, and what these conditions may portend for future research funding.

  20. Reporting studies on time to diagnosis: proposal of a guideline by an international panel (REST).

    PubMed

    Launay, Elise; Cohen, Jérémie F; Bossuyt, Patrick M; Buekens, Pierre; Deeks, Jonathan; Dye, Timothy; Feltbower, Richard; Ferrari, Andrea; Kramer, Michael; Leeflang, Mariska; Moher, David; Moons, Karel G; von Elm, Erik; Ravaud, Philippe; Chalumeau, Martin

    2016-09-27

    Studies on time to diagnosis are an increasing field of clinical research that may help to plan corrective actions and identify inequities in access to healthcare. Specific features of time to diagnosis studies, such as how participants were selected and how time to diagnosis was defined and measured, are poorly reported. The present study aims to derive a reporting guideline for studies on time to diagnosis. Each item of a list previously used to evaluate the completeness of reporting of studies on time to diagnosis was independently evaluated by a core panel of international experts (n = 11) for relevance and readability before an open electronic discussion allowed consensus to be reached on a refined list. The list was then submitted with an explanatory document to first, last and/or corresponding authors (n = 98) of published systematic reviews on time to diagnosis (n = 45) for relevance and readability, and finally approved by the core expert panel. The refined reporting guideline consists of a 19-item checklist: six items are about the process of participant selection (with a suggested flowchart), six about the definition and measurement of time to diagnosis, and three about optional analyses of associations between time to diagnosis and participant characteristics and health outcomes. Of 24 responding authors of systematic reviews, more than 21 (≥88 %) rated the items as relevant, and more than 17 (≥70 %) as readable; 19 of 22 (86 %) authors stated that they would potentially use the reporting guideline in the future. We propose a reporting guideline (REST) that could help authors, reviewers, and editors of time to diagnosis study reports to improve the completeness and the accuracy of their reporting.

  1. 77 FR 21155 - Open Meeting of the Taxpayer Advocacy Panel Bankruptcy Compliance Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-09

    ... improving customer service at the Internal Revenue Service. DATES: The meeting will be held Tuesday, May 8... DEPARTMENT OF THE TREASURY Internal Revenue Service Open Meeting of the Taxpayer Advocacy Panel Bankruptcy Compliance Project Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of...

  2. 78 FR 36303 - Open Meeting of the Taxpayer Advocacy Panel Notices and Correspondence Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-17

    ... Notices and Correspondence Project Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of Meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Notices and Correspondence... Act, 5 U.S.C. App. (1988) that a meeting of the Taxpayer Advocacy Panel Notices and Correspondence...

  3. 78 FR 22948 - Open Meeting of the Taxpayer Advocacy Panel Notices and Correspondence Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-17

    ... Notices and Correspondence Project Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of Meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Notices and Correspondence... Act, 5 U.S.C. App. (1988) that a meeting of the Taxpayer Advocacy Panel Notices and Correspondence...

  4. 78 FR 28946 - Open Meeting of the Taxpayer Advocacy Panel Notices and Correspondence Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-16

    ... Notices and Correspondence Project Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of Meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Notices and Correspondence... Act, 5 U.S.C. App. (1988) that a meeting of the Taxpayer Advocacy Panel Notices and Correspondence...

  5. Two-dimensional character of internal rotation of furfural and other five-member heterocyclic aromatic aldehydes

    NASA Astrophysics Data System (ADS)

    Bataev, Vadim A.; Pupyshev, Vladimir I.; Godunov, Igor A.

    2016-05-01

    The features of nuclear motion corresponding to the rotation of the formyl group (CHO) are studied for the molecules of furfural and some other five-member heterocyclic aromatic aldehydes by the use of MP2/6-311G** quantum chemical approximation. It is demonstrated that the traditional one-dimensional models of internal rotation for the molecules studied have only limited applicability. The reason is the strong kinematic interaction of the rotation of the CHO group and out-of-plane CHO deformation that is realized for the molecules under consideration. The computational procedure based on the two-dimensional approximation is considered for low lying vibrational states as more adequate to the problem.

  6. Hilfiker retaining walls with full height cast-in-place panels

    DOT National Transportation Integrated Search

    1998-02-01

    Construction of retaining walls utilizing full height panels introduces a degree of indeterminacy to the structure. The ability to effectively analyze the internal behavior of such systems, and limited field performance, qualifies them as appropriate...

  7. Quiet Honeycomb Panels

    NASA Technical Reports Server (NTRS)

    Palumbo, Daniel L.; Klos, Jacob

    2010-01-01

    Sandwich honeycomb composite panels are lightweight and strong, and, therefore, provide a reasonable alternative to the aluminum ring frame/stringer architecture currently used for most aircraft airframes. The drawback to honeycomb panels is that they radiate noise into the aircraft cabin veil- efficiently provoking the need for additional sound treatment which adds weight and reduces the material's cost advantage. A series of honeycomb panels was made -hick incorporated different design strategies aimed at reducing the honeycomb panels' radiation efficiency while at the same time maintaining their strength. The majority of the designs were centered around the concept of creating areas of reduced stiffness in the panel by adding voids and recesses to the core. The effort culminated with a reinforced/recessed panel which had 6 dB higher transmission loss than the baseline solid core panel while maintaining comparable strength.

  8. Interactive optical panel

    DOEpatents

    Veligdan, James T.

    1995-10-03

    An interactive optical panel assembly 34 includes an optical panel 10 having a plurality of ribbon optical waveguides 12 stacked together with opposite ends thereof defining panel first and second faces 16, 18. A light source 20 provides an image beam 22 to the panel first face 16 for being channeled through the waveguides 12 and emitted from the panel second face 18 in the form of a viewable light image 24a. A remote device 38 produces a response beam 40 over a discrete selection area 36 of the panel second face 18 for being channeled through at least one of the waveguides 12 toward the panel first face 16. A light sensor 42,50 is disposed across a plurality of the waveguides 12 for detecting the response beam 40 therein for providing interactive capability.

  9. Senior GRADE methodologists encounter challenges as part of WHO guideline development panels: an inductive content analysis.

    PubMed

    Alexander, Paul E; Li, Shelly-Anne; Gionfriddo, Michael R; Stoltzfus, Rebecca J; Neumann, Ignacio; Brito, Juan P; Djulbegovic, Benjamin; Montori, Victor M; Schünemann, Holger J; Guyatt, Gordon H

    2016-02-01

    The World Health Organization (WHO) classifies a substantial proportion of their recommendations as strong despite low or very low confidence (certainty) in estimates of effect. Such discordant recommendations are often inconsistent with Grading of Recommendations Assessment, Development and Evaluation (GRADE) guidance. To gain the perspective of senior WHO methodology chairs regarding panels' use of GRADE, particularly regarding discordant recommendations. Senior active GRADE methodologists who had served on at least two WHO panels and were an author on at least one peer-reviewed published article on GRADE methodology. Five eligible methodologists participated in detailed semistructured interviews. Respondents answered questions regarding how they were viewed by other panelists and WHO leadership, and how they handled situations when panelists made discordant recommendations they felt were inappropriate. They also provided information on how the process can be improved. Interviews were recorded and transcribed, and inductive content analysis was used to derive codes, categories, and emergent themes. Three themes emerged from the interviews of five methodologists: (1) The perceived role of methodologists in the process, (2) Contributors to discordant recommendations, and (3) Strategies for improvement. Salient findings included (1) a perceived tension between methodologists and WHO panels as a result of panel members' resistance to adhering to GRADE guidance; (2) both financial and nonfinancial conflicts of interest among panel members as an explanation for discordant recommendations; and (3) the need for greater clarity of, and support for, the role of methodologists as co-chairs of panels. These findings suggest that the role of the GRADE methodologist as a co-chair needs to be clarified by the WHO leadership. They further suggest the need for additional training for panelists, quality monitoring, and feedback to ensure optimal use of GRADE in guideline

  10. Going Global: Dispatches from Experienced Board Members

    ERIC Educational Resources Information Center

    Lovett, Clara M.

    2011-01-01

    Board members are increasingly being asked to bless a variety of international engagements. But how many trustees truly understand how to evaluate opportunities or assess potential risks? The author interviewed board members at institutions that already have committed significant resources to global agendas. These interviewees represent a wide…

  11. Safety Panel Resources

    NASA Technical Reports Server (NTRS)

    Stewart, Christine E.

    2008-01-01

    The goal of this paper is to explore what resources are potentially available to safety panels and to provide some guidance on how to utilize those resources. While the examples used in this paper will concentrate on the Flight Equipment and Reliability Review Panel (FESRRP) and Extravehicular Activity (EVA) hardware that have come through that panel, as well as resources at Johnson Space Center, the paper will address how this applies to safety panels in general, and where possible cite examples for other safety panels.

  12. 76 FR 56878 - Open Meeting of the Taxpayer Advocacy Panel Volunteer Income Tax Assistance Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-14

    ... Volunteer Income Tax Assistance Project Committee AGENCY: Internal Revenue Service (IRS) Treasury. ACTION: Notice of meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Volunteer Income Tax... Taxpayer Advocacy Panel Volunteer Income Tax Assistance Project Committee will be held Tuesday, October 11...

  13. 76 FR 37199 - Open Meeting of the Taxpayer Advocacy Panel Taxpayer Assistance Center Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-24

    ... suggestions on improving customer service at the Internal Revenue Service. DATES: The meeting will be held... DEPARTMENT OF THE TREASURY Internal Revenue Service Open Meeting of the Taxpayer Advocacy Panel Taxpayer Assistance Center Project Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION...

  14. 77 FR 61053 - Open Meeting of the Taxpayer Advocacy Panel Return Processing Delays Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-05

    ... suggestions on improving customer service at the Internal Revenue Service. DATES: The meeting will be held... DEPARTMENT OF THE TREASURY Internal Revenue Service Open Meeting of the Taxpayer Advocacy Panel Return Processing Delays Project Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION...

  15. 77 FR 21156 - Open Meeting of the Taxpayer Advocacy Panel Return Processing Delays Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-09

    ... suggestions on improving customer service at the Internal Revenue Service. DATES: The meeting will be held... DEPARTMENT OF THE TREASURY Internal Revenue Service Open Meeting of the Taxpayer Advocacy Panel Return Processing Delays Project Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION...

  16. 76 FR 6189 - Open Meeting of the Taxpayer Advocacy Panel Taxpayer Assistance Center Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-03

    ... suggestions on improving customer service at the Internal Revenue Service. DATES: The meeting will be held... DEPARTMENT OF THE TREASURY Internal Revenue Service Open Meeting of the Taxpayer Advocacy Panel Taxpayer Assistance Center Project Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION...

  17. 77 FR 8328 - Open Meeting of the Taxpayer Advocacy Panel Return Processing Delays Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-14

    ... suggestions on improving customer service at the Internal Revenue Service. DATES: The meeting will be held... DEPARTMENT OF THE TREASURY Internal Revenue Service Open Meeting of the Taxpayer Advocacy Panel Return Processing Delays Project Committee AGENCY: Internal Revenue Service (IRS) Treasury. ACTION...

  18. International Cooperation in the Field of International Space Station (ISS) Payload Safety

    NASA Technical Reports Server (NTRS)

    Heimann, Timothy; Larsen, Axel M.; Rose, Summer; Sgobba, Tommaso

    2005-01-01

    In the frame of the International Space Station (ISS) Program cooperation, in 1998, the European Space Agency (ESA) approached the National Aeronautics and Space Administration (NASA) with the unique concept of a Payload Safety Review Panel (PSRP) "franchise" based at the European Space Technology Center (ESTEC), where the panel would be capable of autonomously reviewing flight hardware for safety. This paper will recount the course of an ambitious idea as it progressed into a fully functional reality. It will show how a panel initially conceived at NASA to serve a national programme has evolved into an international safety cooperation asset. The PSRP established at NASA began reviewing ISS payloads approximately in late 1994 or early 1995 as an expansion of the pre-existing Shuttle Program PSRP. This paper briefly describes the fundamental Shuttle safety process and the establishment of the safety requirements for payloads intending to use the Space Transportation System and International Space Station (ISS). The paper will also offer some historical statistics about the experiments that completed the payload safety process for Shuttle and ISS. The paper 1 then presents the background of ISS agreements and international treaties that had to be taken into account when establishing the ESA PSRP. The detailed franchising model will be expounded upon, followed by an outline of the cooperation charter approved by the NASA Associate Administrator, Office of Space Flight, and ESA Director of Manned Spaceflight and Microgravity. The resulting ESA PSRP implementation and its success statistics to date will then be addressed. Additionally the paper presents the ongoing developments with the Japan Aerospace Exploration Agency. The discussion will conclude with ideas for future developments, such to achieve a fully integrated international system of payload safety panels for ISS.

  19. PMARC_12 - PANEL METHOD AMES RESEARCH CENTER, VERSION 12

    NASA Technical Reports Server (NTRS)

    Ashby, D. L.

    1994-01-01

    Panel method computer programs are software tools of moderate cost used for solving a wide range of engineering problems. The panel code PMARC_12 (Panel Method Ames Research Center, version 12) can compute the potential flow field around complex three-dimensional bodies such as complete aircraft models. PMARC_12 is a well-documented, highly structured code with an open architecture that facilitates modifications and the addition of new features. Adjustable arrays are used throughout the code, with dimensioning controlled by a set of parameter statements contained in an include file; thus, the size of the code (i.e. the number of panels that it can handle) can be changed very quickly. This allows the user to tailor PMARC_12 to specific problems and computer hardware constraints. In addition, PMARC_12 can be configured (through one of the parameter statements in the include file) so that the code's iterative matrix solver is run entirely in RAM, rather than reading a large matrix from disk at each iteration. This significantly increases the execution speed of the code, but it requires a large amount of RAM memory. PMARC_12 contains several advanced features, including internal flow modeling, a time-stepping wake model for simulating either steady or unsteady (including oscillatory) motions, a Trefftz plane induced drag computation, off-body and on-body streamline computations, and computation of boundary layer parameters using a two-dimensional integral boundary layer method along surface streamlines. In a panel method, the surface of the body over which the flow field is to be computed is represented by a set of panels. Singularities are distributed on the panels to perturb the flow field around the body surfaces. PMARC_12 uses constant strength source and doublet distributions over each panel, thus making it a low order panel method. Higher order panel methods allow the singularity strength to vary linearly or quadratically across each panel. Experience has shown

  20. New chairman takes helm at Climate Change Panel

    NASA Astrophysics Data System (ADS)

    Showstack, Randy

    An Indian industrial engineer and economist who supports the Kyoto Protocol, and who has sharply criticized the administration of George W. Bush on the climate change issue for not doing enough to curb greenhouse gas emissions, won the first-ever contested election for chairman of the Intergovernmental Panel on Climate Change (IPCC) during a meeting on 19 April.Rajendra Pachauri is the first representative from a developing country to chair the IPCC, a panel of about 2,500 experts on a wide range of areas related to climate change. The IPCC was established in 1988 by the World Meteorological Organization and the United Nations Environment Programme. In total, the IPCC currently includes 192 member states. Although the bulk of the IPCC's work is conducted by three technical working groups, the chairman plays a key role in facilitating the overall process of the IPCC, organizing the scientific debate within the IPCC, and serving as chief spokesman.

  1. Intergovernmental Panel on Climate Change. First Assessment Report Overview.

    ERIC Educational Resources Information Center

    International Environmental Affairs, 1991

    1991-01-01

    Presented are policymakers' summaries of the three working groups of the Intergovernmental Panel on Climate Change (IPCC)--science, impacts, and response strategies, the report of the IPCC Special Committee on the Participation of Developing Countries, and a discussion of international cooperation and future work. (CW)

  2. 75 FR 7539 - Open Meeting of the Area 4 Taxpayer Advocacy Panel (Including the States of Illinois, Indiana...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-02-19

    ...An open meeting of the Area 4 Taxpayer Advocacy Panel will be conducted. The Taxpayer Advocacy Panel is soliciting public comments, ideas, and suggestions on improving customer service at the Internal Revenue Service.

  3. Analysis of Wind Forces on Roof-Top Solar Panel

    NASA Astrophysics Data System (ADS)

    Panta, Yogendra; Kudav, Ganesh

    2011-03-01

    Structural loads on solar panels include forces due to high wind, gravity, thermal expansion, and earthquakes. International Building Code (IBC) and the American Society of Civil Engineers are two commonly used approaches in solar industries to address wind loads. Minimum Design Loads for Buildings and Other Structures (ASCE 7-02) can be used to calculate wind uplift loads on roof-mounted solar panels. The present study is primarily focused on 2D and 3D modeling with steady, and turbulent flow over an inclined solar panel on the flat based roof to predict the wind forces for designing wind management system. For the numerical simulation, 3-D incompressible flow with the standard k- ɛ was adopted and commercial CFD software ANSYS FLUENT was used. Results were then validated with wind tunnel experiments with a good agreement. Solar panels with various aspect ratios for various high wind speeds and angle of attacks were modeled and simulated in order to predict the wind loads in various scenarios. The present study concluded to reduce the strong wind uplift by designing a guide plate or a deflector before the panel. Acknowledgments to Northern States Metal Inc., OH (GK & YP) and School of Graduate Studies of YSU for RP & URC 2009-2010 (YP).

  4. International comparisons of the technical efficiency of the hospital sector: panel data analysis of OECD countries using parametric and non-parametric approaches.

    PubMed

    Varabyova, Yauheniya; Schreyögg, Jonas

    2013-09-01

    There is a growing interest in the cross-country comparisons of the performance of national health care systems. The present work provides a comparison of the technical efficiency of the hospital sector using unbalanced panel data from OECD countries over the period 2000-2009. The estimation of the technical efficiency of the hospital sector is performed using nonparametric data envelopment analysis (DEA) and parametric stochastic frontier analysis (SFA). Internal and external validity of findings is assessed by estimating the Spearman rank correlations between the results obtained in different model specifications. The panel-data analyses using two-step DEA and one-stage SFA show that countries, which have higher health care expenditure per capita, tend to have a more technically efficient hospital sector. Whether the expenditure is financed through private or public sources is not related to the technical efficiency of the hospital sector. On the other hand, the hospital sector in countries with higher income inequality and longer average hospital length of stay is less technically efficient. Copyright © 2013 The Authors. Published by Elsevier Ireland Ltd.. All rights reserved.

  5. Environmental Influences on Well-Being: A Dyadic Latent Panel Analysis of Spousal Similarity

    ERIC Educational Resources Information Center

    Schimmack, Ulrich; Lucas, Richard E.

    2010-01-01

    This article uses dyadic latent panel analysis (DLPA) to examine environmental influences on well-being. DLPA requires longitudinal dyadic data. It decomposes the observed variance of both members of a dyad into a trait, state, and an error component. Furthermore, state variance is decomposed into initial and new state variance. Total observed…

  6. Axial Compression Behavior of a New Type of Prefabricated Concrete Sandwich Wall Panel

    NASA Astrophysics Data System (ADS)

    Qun, Xie; Shuai, Wang; Chun, Liu

    2018-03-01

    A novel type of prefabricated concrete sandwich wall panel which could be used as a load-bearing structural element in buildings has been presented in this paper. Compared with the traditional sandwich panels, there are several typical characteristics for this wall system, including core columns confined by spiral stirrup along the cross-section of panel with 600mm spacing, precast foamed concrete block between two structural layers as internal insulation part, and a three-dimensional (3D) steel wire skeleton in each layer which is composed of two vertical steel wire meshes connected by horizontally short steel bar. All steel segments in the panel are automatically prefabricated in factory and then are assembled to form steel system in site. In order to investigate the structural behavior of this wall panel, two full-scale panels have been experimentally studied under axial compressive load. The test results show that the wall panel presents good load-bearing capacity and integral stiffness without out-of-plane flexural failure. Compared to the panel with planar steel wire mesh in concrete layer, the panel with 3D steel wire skeleton presents higher strength and better rigidity even in the condition of same steel ratio in panels which verifies that the 3D steel skeleton could greatly enhance the structural behavior of sandwich panel.

  7. Expert panels as a reference standard in orthodontic research: An assessment of published methods and reporting.

    PubMed

    Lempesi, Evangelia; Toulia, Electra; Pandis, Nikolaos

    2017-04-01

    The aim of this study was to investigate the expert panel methodology applied in orthodontics and its reporting quality. Additionally, the relationship between the reporting quality and a range of variables was explored. PubMed was searched for orthodontic studies in which the final diagnosis or assessment was made by 2 or more experts published up to March 16, 2015. Reporting quality assessment was conducted using an established modified checklist. The relationship between potential predictors and the total score was assessed using univariable linear regression. We identified 237 studies with a mean score of 9.97 (SD, 1.12) out of a maximum of 15. Critical information about panel methodology was missing in all studies. The panel composition differed substantially across studies, ranging from 2 to 646 panel members, with large variations in the expertise represented. Only 17 studies (7.2%) reported sample size calculations to justify the panel size. Panel members were partly blinded in 65 (27.4%) studies. Most studies failed to report which statistic was used to compute intrarater (65.8%) and interrater (66.2%) agreements. Journal type (nonorthodontic: β, 0.23; 95% CI, -0.07 to 0.54 compared with orthodontic), publication year (β, 0; 95% CI, -0.02 to 0.02 for each additional year), number of authors (1-3: β, 0.30; 95% CI, -0.13 to 0.74 compared with at least 6; 4-5: β, 0.18; 95% CI, -0.29 to 0.33 compared with at least 6), and number of centers involved (single: β, 0.20; 95% CI, -0.14 to 0.54 compared with multicenter) were not significant predictors of improved reporting. Studies published in Asia and Australia had significantly lower scores compared with those published in Europe (β, -0.54; 95% CI, -0.92 to -0.17). Formal guidelines on methodology and reporting of studies involving expert panels are required. Copyright © 2016 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

  8. 76 FR 17996 - Open Meeting of the Taxpayer Advocacy Panel Volunteer Income Tax Assistance Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-31

    ... Volunteer Income Tax Assistance Project Committee AGENCY: Internal Revenue Service (IRS) Treasury. ACTION: Notice of meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Volunteer Income Tax...) that a meeting of the Taxpayer Advocacy Panel Volunteer Income Tax Assistance Project Committee will be...

  9. 76 FR 45004 - Open Meeting of the Taxpayer Advocacy Panel Volunteer Income Tax Assistance Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-07-27

    ... Volunteer Income Tax Assistance Project Committee AGENCY: Internal Revenue Service (IRS) Treasury. ACTION: Notice of meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Volunteer Income Tax... Panel Volunteer Income Tax Assistance Project Committee will be held Tuesday, September 13, 2011, 2 p.m...

  10. 75 FR 18955 - Open Meeting of the Taxpayer Advocacy Panel Volunteer Income Tax Assistance Issue Committee.

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-13

    ... Volunteer Income Tax Assistance Issue Committee. AGENCY: Internal Revenue Service (IRS) Treasury. ACTION: Corrected notice of meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Volunteer Income Tax... Taxpayer Advocacy Panel Volunteer Income Tax Assistance Issue Committee will be held Thursday, May 7, 2010...

  11. 76 FR 63716 - Open Meeting of the Taxpayer Advocacy Panel Volunteer Income Tax Assistance Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-13

    ... Volunteer Income Tax Assistance Project Committee AGENCY: Internal Revenue Service (IRS) Treasury. ACTION: Notice of meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Volunteer Income Tax... Panel Volunteer Income Tax Assistance Project Committee will be held Tuesday, November 08, 2011, 2 p.m...

  12. 76 FR 10944 - Open Meeting of the Taxpayer Advocacy Panel Earned Income Tax Credit Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-28

    ... Earned Income Tax Credit Project Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Earned Income Tax Credit... meeting of the Taxpayer Advocacy Panel Earned Income Tax Credit Project Committee will be held Tuesday...

  13. 75 FR 4140 - Open Meeting of the Taxpayer Advocacy Panel Earned Income Tax Credit Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-01-26

    ... Earned Income Tax Credit Project Committee AGENCY: Internal Revenue Service (IRS) Treasury. ACTION... Tax Credit Project Committee will be conducted. The Taxpayer Advocacy Panel is soliciting public... Advocacy Panel Earned Income Tax Credit Project Committee will be held Wednesday, February 24, 2010, at 1 p...

  14. A Cross-Lag Panel Analysis of Low Self-Esteem as a Predictor of Adolescent Internalizing Symptoms in a Prospective Longitudinal Study.

    PubMed

    In-Albon, Tina; Meyer, Andrea H; Metzke, Christa Winkler; Steinhausen, Hans-Christoph

    2017-06-01

    Self-esteem, generally regarded as an important indicator of adolescents' mental health, was assessed by a self-report questionnaire in a school sample of 593 subjects who had been assessed at 3 time points over 7 years between 11 and 25 years of age within the Zurich Psychology and Psychopathology Study (ZAPPS). Cross-lagged panel analyses of the longitudinal data from ZAPPS indicated that self-esteem was predictive of internalizing problems and had an impact on internalizing symptoms when the analyses were adjusted for coping behavior, efficiency of social networks, and impact of stressful life events. Self-esteem was also stable (r = .37-.60) within the observed age range, after controlling for prior levels of the predicted variables. The findings support the impact of self-esteem on mental health and indicate the importance of addressing self-esteem in prevention and intervention programs.

  15. Advanced concentrator panels

    NASA Technical Reports Server (NTRS)

    Bell, D. M.; Bedard, R. J., Jr.

    1981-01-01

    The prototype fabrication of a lightweight, high-quality cellular glass substrate reflective panel for use in an advanced point-focusing solar concentrator was completed. The reflective panel is a gore shaped segment of an 11-m paraboloidal dish. The overall concentrator design and the design of the reflective panels are described. prototype-specific panel design modifications are discussed and the fabrication approach and procedure outlined.

  16. The Influence of Faculty Exchange Programs on Faculty Members' Professional Development

    ERIC Educational Resources Information Center

    Alkarzon, Awni

    2016-01-01

    This paper addresses the problems facing faculty members, who made short-term international exchange programs in foreign countries; in their attempts to internationalize the campus through teaching, research, and service. Some faculty members who participated in foreign exchange programs try to infuse their international experience through…

  17. Development of a Pressure Box to Evaluate Reusable-Launch-Vehicle Cryogenic-Tank Panels

    NASA Technical Reports Server (NTRS)

    Ambur, Damodar R.; Sikora, Joseph; Maguire, James F.; Winn, Peter M.

    1996-01-01

    A cryogenic pressure-box test machine has been designed and is being developed to test full-scale reusable-launch-vehicle cryogenic-tank panels. This machine is equipped with an internal pressurization system, a cryogenic cooling system, and a heating system to simulate the mechanical and thermal loading conditions that are representative of a reusable-launch-vehicle mission profile. The cryogenic cooling system uses liquid helium and liquid nitrogen to simulate liquid hydrogen and liquid oxygen tank internal temperatures. A quartz lamp heating system is used for heating the external surface of the test panels to simulate cryogenic-tank external surface temperatures during re-entry of the launch vehicle. The pressurization system uses gaseous helium and is designed to be controlled independently of the cooling system. The tensile loads in the axial direction of the test panel are simulated by means of hydraulic actuators and a load control system. The hoop loads in the test panel are reacted by load-calibrated turnbuckles attached to the skin and frame elements of the test panel. The load distribution in the skin and frames can be adjusted to correspond to the tank structure by using these turnbuckles. The seal between the test panel and the cryogenic pressure box is made from a reinforced Teflon material which can withstand pressures greater than 52 psig at cryogenic temperatures. Analytical results and tests on prototype test components indicate that most of the cryogenic-tank loading conditions that occur in flight can be simulated in the cryogenic pressure-box test machine.

  18. Workplace Literacy: Business, Government, and Academic Perspectives. Panel Discussion.

    ERIC Educational Resources Information Center

    Malicky, Grace, Comp.; Dieleman, Carolyn; Campbell, Lloyd; Wong, Bill; Krahn, Harvey

    1998-01-01

    Presents highlights of a panel discussion on workplace literacy at the Literacy in the 21st Century Research Conference (Edmonton, Alberta, October 1997). Participants from business, government, and university discussed Syncrude Canada's Workplace Literacy Program, implications of the International Adult Literacy Survey for the labor market, and…

  19. Recommendations for the performance rating of flat plate terrestrial photovoltaic solar panels

    NASA Technical Reports Server (NTRS)

    Treble, F. C.

    1976-01-01

    A review of recommendations for standardizing the performance rating of flat plate terrestrial solar panels is given to develop an international standard code of practice for performance rating. Required data to characterize the performance of a solar panel are listed. Other items discussed are: (1) basic measurement procedures; (2) performance measurement in natural sunlight and simulated sunlight; (3) standard solar cells; (4) the normal incidence method; (5) global method and (6) definition of peak power.

  20. What Are Fair Study Benefits in International Health Research? Consulting Community Members in Kenya

    PubMed Central

    Njue, Maureen; Kombe, Francis; Mwalukore, Salim; Molyneux, Sassy; Marsh, Vicki

    2014-01-01

    Background Planning study benefits and payments for participants in international health research in low- income settings can be a difficult and controversial process, with particular challenges in balancing risks of undue inducement and exploitation and understanding how researchers should take account of background inequities. At an international health research programme in Kenya, this study aimed to map local residents' informed and reasoned views on the effects of different levels of study benefits and payments to inform local policy and wider debates in international research. Methods and Findings Using a relatively novel two-stage process community consultation approach, five participatory workshops involving 90 local residents from diverse constituencies were followed by 15 small group discussions, with components of information-sharing, deliberation and reflection to situate normative reasoning within debates. Framework Analysis drew inductively and deductively on voice- recorded discussions and field notes supported by Nvivo 10 software, and the international research ethics literature. Community members' views on study benefits and payments were diverse, with complex contextual influences and interplay between risks of giving ‘too many’ and ‘too few’ benefits, including the role of cash. While recognising important risks for free choice, research relationships and community values in giving ‘too many’, the greatest concerns were risks of unfairness in giving ‘too few’ benefits, given difficulties in assessing indirect costs of participation and the serious consequences for families of underestimation, related to perceptions of researchers' responsibilities. Conclusions Providing benefits and payments to participants in international research in low-income settings is an essential means by which researchers meet individual-level and structural forms of ethical responsibilities, but understanding how this can be achieved requires a careful

  1. KENNEDY SPACE CENTER, FLA. - Jim Landy, NDE specialist with United Space Alliance (USA), prepares equipment to examine a Reinforced Carbon Carbon panel using flash thermography. A relatively new procedure at KSC, thermography uses high intensity light to heat areas of the panels. The panels are then immediately scanned with an infrared camera. As the panels cool, any internal flaws are revealed. The gray carbon composite RCC panels are attached to the leading edge of the wing of the orbiters. They have sufficient strength to withstand the aerodynamic forces experienced during launch and reentry, which can reach as high as 800 pounds per square foot. The operating range of RCC is from minus 250º F to about 3,000º F, the temperature produced by friction with the atmosphere during reentry. The panels will be installed on the orbiter Discovery, designated for the first Return to Flight mission, STS-114.

    NASA Image and Video Library

    2004-03-10

    KENNEDY SPACE CENTER, FLA. - Jim Landy, NDE specialist with United Space Alliance (USA), prepares equipment to examine a Reinforced Carbon Carbon panel using flash thermography. A relatively new procedure at KSC, thermography uses high intensity light to heat areas of the panels. The panels are then immediately scanned with an infrared camera. As the panels cool, any internal flaws are revealed. The gray carbon composite RCC panels are attached to the leading edge of the wing of the orbiters. They have sufficient strength to withstand the aerodynamic forces experienced during launch and reentry, which can reach as high as 800 pounds per square foot. The operating range of RCC is from minus 250º F to about 3,000º F, the temperature produced by friction with the atmosphere during reentry. The panels will be installed on the orbiter Discovery, designated for the first Return to Flight mission, STS-114.

  2. KENNEDY SPACE CENTER, FLA. - Jim Landy, NDE specialist with USA, points to an area of a Reinforced Carbon Carbon panel just examined using flash thermography. A relatively new procedure at KSC, thermography uses high intensity light to heat areas of the panels. The panels are then immediately scanned with an infrared camera. As the panels cool, any internal flaws are revealed. The gray carbon composite RCC panels are attached to the leading edge of the wing of the orbiters. They have sufficient strength to withstand the aerodynamic forces experienced during launch and reentry, which can reach as high as 800 pounds per square foot. The operating range of RCC is from minus 250º F to about 3,000º F, the temperature produced by friction with the atmosphere during reentry. The panels will be installed on the orbiter Discovery, designated for the first Return to Flight mission, STS-114.

    NASA Image and Video Library

    2004-03-10

    KENNEDY SPACE CENTER, FLA. - Jim Landy, NDE specialist with USA, points to an area of a Reinforced Carbon Carbon panel just examined using flash thermography. A relatively new procedure at KSC, thermography uses high intensity light to heat areas of the panels. The panels are then immediately scanned with an infrared camera. As the panels cool, any internal flaws are revealed. The gray carbon composite RCC panels are attached to the leading edge of the wing of the orbiters. They have sufficient strength to withstand the aerodynamic forces experienced during launch and reentry, which can reach as high as 800 pounds per square foot. The operating range of RCC is from minus 250º F to about 3,000º F, the temperature produced by friction with the atmosphere during reentry. The panels will be installed on the orbiter Discovery, designated for the first Return to Flight mission, STS-114.

  3. KENNEDY SPACE CENTER, FLA. - Jim Landy, NDE specialist with United Space Alliance (USA), examines a Reinforced Carbon Carbon panel using flash thermography. A relatively new procedure at KSC, thermography uses high intensity light to heat areas of the panels. The panels are then immediately scanned with an infrared camera. As the panels cool, any internal flaws are revealed. The gray carbon composite RCC panels are attached to the leading edge of the wing of the orbiters. They have sufficient strength to withstand the aerodynamic forces experienced during launch and reentry, which can reach as high as 800 pounds per square foot. The operating range of RCC is from minus 250º F to about 3,000º F, the temperature produced by friction with the atmosphere during reentry. The panels will be installed on the orbiter Discovery, designated for the first Return to Flight mission, STS-114.

    NASA Image and Video Library

    2004-03-10

    KENNEDY SPACE CENTER, FLA. - Jim Landy, NDE specialist with United Space Alliance (USA), examines a Reinforced Carbon Carbon panel using flash thermography. A relatively new procedure at KSC, thermography uses high intensity light to heat areas of the panels. The panels are then immediately scanned with an infrared camera. As the panels cool, any internal flaws are revealed. The gray carbon composite RCC panels are attached to the leading edge of the wing of the orbiters. They have sufficient strength to withstand the aerodynamic forces experienced during launch and reentry, which can reach as high as 800 pounds per square foot. The operating range of RCC is from minus 250º F to about 3,000º F, the temperature produced by friction with the atmosphere during reentry. The panels will be installed on the orbiter Discovery, designated for the first Return to Flight mission, STS-114.

  4. KENNEDY SPACE CENTER, FLA. - Jim Landy, NDE specialist with United Space Alliance, sets up equipment to examine a Reinforced Carbon Carbon panel using flash thermography. A relatively new procedure at KSC, thermography uses high intensity light to heat areas of the panels. The panels are then immediately scanned with an infrared camera. As the panels cool, any internal flaws are revealed. The gray carbon composite RCC panels are attached to the leading edge of the wing of the orbiters. They have sufficient strength to withstand the aerodynamic forces experienced during launch and reentry, which can reach as high as 800 pounds per square foot. The operating range of RCC is from minus 250º F to about 3,000º F, the temperature produced by friction with the atmosphere during reentry. The panels will be installed on the orbiter Discovery, designated for the first Return to Flight mission, STS-114.

    NASA Image and Video Library

    2004-03-10

    KENNEDY SPACE CENTER, FLA. - Jim Landy, NDE specialist with United Space Alliance, sets up equipment to examine a Reinforced Carbon Carbon panel using flash thermography. A relatively new procedure at KSC, thermography uses high intensity light to heat areas of the panels. The panels are then immediately scanned with an infrared camera. As the panels cool, any internal flaws are revealed. The gray carbon composite RCC panels are attached to the leading edge of the wing of the orbiters. They have sufficient strength to withstand the aerodynamic forces experienced during launch and reentry, which can reach as high as 800 pounds per square foot. The operating range of RCC is from minus 250º F to about 3,000º F, the temperature produced by friction with the atmosphere during reentry. The panels will be installed on the orbiter Discovery, designated for the first Return to Flight mission, STS-114.

  5. Calibration with confidence: a principled method for panel assessment.

    PubMed

    MacKay, R S; Kenna, R; Low, R J; Parker, S

    2017-02-01

    Frequently, a set of objects has to be evaluated by a panel of assessors, but not every object is assessed by every assessor. A problem facing such panels is how to take into account different standards among panel members and varying levels of confidence in their scores. Here, a mathematically based algorithm is developed to calibrate the scores of such assessors, addressing both of these issues. The algorithm is based on the connectivity of the graph of assessors and objects evaluated, incorporating declared confidences as weights on its edges. If the graph is sufficiently well connected, relative standards can be inferred by comparing how assessors rate objects they assess in common, weighted by the levels of confidence of each assessment. By removing these biases, 'true' values are inferred for all the objects. Reliability estimates for the resulting values are obtained. The algorithm is tested in two case studies: one by computer simulation and another based on realistic evaluation data. The process is compared to the simple averaging procedure in widespread use, and to Fisher's additive incomplete block analysis. It is anticipated that the algorithm will prove useful in a wide variety of situations such as evaluation of the quality of research submitted to national assessment exercises; appraisal of grant proposals submitted to funding panels; ranking of job applicants; and judgement of performances on degree courses wherein candidates can choose from lists of options.

  6. Calibration with confidence: a principled method for panel assessment

    PubMed Central

    MacKay, R. S.; Low, R. J.; Parker, S.

    2017-01-01

    Frequently, a set of objects has to be evaluated by a panel of assessors, but not every object is assessed by every assessor. A problem facing such panels is how to take into account different standards among panel members and varying levels of confidence in their scores. Here, a mathematically based algorithm is developed to calibrate the scores of such assessors, addressing both of these issues. The algorithm is based on the connectivity of the graph of assessors and objects evaluated, incorporating declared confidences as weights on its edges. If the graph is sufficiently well connected, relative standards can be inferred by comparing how assessors rate objects they assess in common, weighted by the levels of confidence of each assessment. By removing these biases, ‘true’ values are inferred for all the objects. Reliability estimates for the resulting values are obtained. The algorithm is tested in two case studies: one by computer simulation and another based on realistic evaluation data. The process is compared to the simple averaging procedure in widespread use, and to Fisher's additive incomplete block analysis. It is anticipated that the algorithm will prove useful in a wide variety of situations such as evaluation of the quality of research submitted to national assessment exercises; appraisal of grant proposals submitted to funding panels; ranking of job applicants; and judgement of performances on degree courses wherein candidates can choose from lists of options. PMID:28386432

  7. Application of water flowing PVC pipe and EPS foam bead as insulation for wall panel

    NASA Astrophysics Data System (ADS)

    Ali, Umi Nadiah; Nor, Norazman Mohamad; Yusuf, Mohammed Alias; Othman, Maidiana; Yahya, Muhamad Azani

    2018-02-01

    Malaysia located in tropical climate which have a typical temperature range between 21 °C to 36 °C. Due to this, air-conditioning system for buildings become a necessity to provide comfort to occupants. In order to reduce the energy consumption of the air-conditioning system, the transmission of heat from outdoor to indoor space should be kept as minimum as possible. This article discuss about a technology to resist heat transfer through concrete wall panel using a hybrid method. In this research, PVC pipe was embedded at the center of concrete wall panel while the EPS foam beads were added about 1% of the cement content in the concrete mix forming the outer layer of the wall panel. Water is regulated in the PVC pipe from the rainwater harvesting system. The aim of this study is to minimize heat transfer from the external environment into the building. Internal building temperature which indicated in BS EN ISO 7730 or ASHRAE Standard 55 where the comfort indoor thermal is below 25°C during the daytime. Study observed that the internal surface temperature of heat resistance wall panel is up to 3°C lower than control wall panel. Therefore, we can conclude that application of heat resistance wall panel can lead to lower interior building temperature.

  8. 77 FR 47166 - Open Meeting of the Taxpayer Advocacy Panel Tax Forms and Publications Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-07

    ... Tax Forms and Publications Project Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION... Project Committee will be conducted. The Taxpayer Advocacy Panel is soliciting public comments, ideas and... Panel Tax Forms and Publications Project Committee will be held Wednesday, September 12, 2012, at 2:00 p...

  9. 77 FR 67735 - Open Meeting of the Taxpayer Advocacy Panel Toll-Free Phone Line Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-11-13

    ... Toll-Free Phone Line Project Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of Meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Toll-Free Phone Line Project... Taxpayer Advocacy Panel Toll-Free Phone Line Project Committee will be held Monday, December 3rd, 2012...

  10. 76 FR 10942 - Open Meeting of the Taxpayer Advocacy Panel Volunteer Income Tax Assistance Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-28

    ... Volunteer Income Tax Assistance Project Committee AGENCY: Internal Revenue Service, Treasury. ACTION: Notice of meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Volunteer Income Tax Assistance... Act, 5 U.S.C. App. (1988) that a meeting of the Taxpayer Advocacy Panel Volunteer Income Tax...

  11. 78 FR 64293 - Open Meeting of the Taxpayer Advocacy Panel Tax Forms and Publications Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-10-28

    ... Tax Forms and Publications Project Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Tax Forms and Publications... Panel Tax Forms and Publications Project Committee will be held Wednesday, November 13, 2013 at 11:00 a...

  12. 76 FR 45006 - Open Meeting of the Taxpayer Advocacy Panel Earned Income Tax Credit Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-07-27

    ... Earned Income Tax Credit Project Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Earned Income Tax Credit... Panel Earned Income Tax Credit Project Committee will be held Monday, September 26, 2011, at 3 p.m...

  13. The Berlin International Consensus Meeting on Concussion in Sport.

    PubMed

    Davis, Gavin A; Ellenbogen, Richard G; Bailes, Julian; Cantu, Robert C; Johnston, Karen M; Manley, Geoffrey T; Nagahiro, Shinji; Sills, Allen; Tator, Charles H; McCrory, Paul

    2018-02-01

    The Fifth International Conference on Concussion in Sport was held in Berlin in October 2016. A series of 12 questions and subquestions was developed and the expert panel members were required to perform a systematic review to answer each question. Following presentation at the Berlin meeting of the systematic review, poster abstracts and audience discussion, the summary Consensus Statement was produced. Further, a series of tools for the management of sport-related concussion was developed, including the Sport Concussion Assessment Tool Fifth edition (SCAT5), the Child SCAT5, and the Concussion Recognition Tool Fifth edition. This paper elaborates on this process, the outcomes, and explores the implications for neurosurgeons in the management of sport-related concussion. Copyright © 2017 by the Congress of Neurological Surgeons.

  14. Wills, Trusts, and Charitable Estate Planning: An Analysis of Document Effectiveness Using Panel Data

    ERIC Educational Resources Information Center

    James, Russell N., III

    2009-01-01

    This paper compares pre-death charitable testamentary expectations with post-death distributions for deceased panel members in the 1995-2006 Health and Retirement Study. Most respondents who reported having a charitable estate plan in the survey wave immediately prior to their death ultimately generated no charitable estate gift after death.…

  15. 76 FR 46897 - Open Meeting of the Taxpayer Advocacy Panel Small Business/Self Employed Correspondence Exam Toll...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-03

    ... Small Business/Self Employed Correspondence Exam Toll Free Project Committee AGENCY: Internal Revenue... Panel Small Business/ Self Employed Correspondence Exam Toll Free Project Committee will be conducted....C. App. (1988) that an open meeting of the Taxpayer Advocacy Panel Small Business/Self Employed...

  16. 76 FR 37893 - Open Meeting of the Taxpayer Advocacy Panel Small Business/Self Employed Correspondence Exam Toll...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-28

    ... Small Business/Self Employed Correspondence Exam Toll Free Project Committee AGENCY: Internal Revenue... Panel Small Business/ Self Employed Correspondence Exam Toll Free Project Committee will be conducted....C. App. (1988) that an open meeting of the Taxpayer Advocacy Panel Small Business/Self Employed...

  17. 76 FR 6190 - Open Meeting of the Taxpayer Advocacy Panel Small Business/Self Employed Correspondence Exam Toll...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-03

    ... Small Business/Self Employed Correspondence Exam Toll Free Project Committee AGENCY: Internal Revenue... Panel Small Business/ Self Employed Correspondence Exam Toll Free Project Committee will be conducted....C. App. (1988) that an open meeting of the Taxpayer Advocacy Panel Small Business/Self Employed...

  18. 76 FR 10942 - Open Meeting of the Taxpayer Advocacy Panel Small Business/Self Employed Correspondence Exam Toll...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-28

    ... Small Business/Self Employed Correspondence Exam Toll Free Project Committee AGENCY: Internal Revenue... Panel Small Business/ Self Employed Correspondence Exam Toll Free Project Committee will be conducted....C. App. (1988) that an open meeting of the Taxpayer Advocacy Panel Small Business/Self Employed...

  19. 75 FR 33895 - Open Meeting of the Taxpayer Advocacy Panel Volunteer Income Tax Assistance Issue Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-15

    ... Volunteer Income Tax Assistance Issue Committee AGENCY: Internal Revenue Service (IRS) Treasury. ACTION: Notice of meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Volunteer Income Tax Issue... Act, 5 U.S.C. App. (1988) that a meeting of the Taxpayer Advocacy Panel Volunteer Income Tax Issue...

  20. 75 FR 55406 - Open Meeting of the Taxpayer Advocacy Panel Volunteer Income Tax Assistance Issue Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-09-10

    ... Volunteer Income Tax Assistance Issue Committee AGENCY: Internal Revenue Service (IRS) Treasury. ACTION: Notice of meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Volunteer Income Tax Issue... Advisory Committee Act, 5 U.S.C. App. (1988) that a meeting of the Taxpayer Advocacy Panel Volunteer Income...

  1. 75 FR 62631 - Open Meeting of the Taxpayer Advocacy Panel Volunteer Income Tax Assistance Issue Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-10-12

    ... Volunteer Income Tax Assistance Issue Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Volunteer Income Tax Issue... Advisory Committee Act, 5 U.S.C. App. (1988) that a meeting of the Taxpayer Advocacy Panel Volunteer Income...

  2. 75 FR 39332 - Open Meeting of the Taxpayer Advocacy Panel Volunteer Income Tax Assistance Issue Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-08

    ... Volunteer Income Tax Assistance Issue Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Volunteer Income Tax Issue... Act, 5 U.S.C. App. (1988) that a meeting of the Taxpayer Advocacy Panel Volunteer Income Tax Issue...

  3. 75 FR 47348 - Open Meeting of the Taxpayer Advocacy Panel Volunteer Income Tax Assistance Issue Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-05

    ... Volunteer Income Tax Assistance Issue Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Volunteer Income Tax Issue... Advisory Committee Act, 5 U.S.C. App. (1988) that a meeting of the Taxpayer Advocacy Panel Volunteer Income...

  4. 75 FR 10864 - Open Meeting of the Taxpayer Advocacy Panel Volunteer Income Tax Assistance Issue Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-09

    ... Volunteer Income Tax Assistance Issue Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of Meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Volunteer Income Tax Issue... Act, 5 U.S.C. App. (1988) that a meeting of the Taxpayer Advocacy Panel Volunteer Income Tax Issue...

  5. 76 FR 17995 - Open Meeting of the Taxpayer Advocacy Panel Tax Forms and Publications Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-31

    ... Tax Forms and Publications Project Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Tax Forms and Publications... Panel Tax Forms and Publications Project Committee will be held Thursday, May 5, 2011 from 8 a.m. to 4...

  6. 75 FR 25317 - Open Meeting of the Taxpayer Advocacy Panel Volunteer Income Tax Assistance Issue Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-05-07

    ... Volunteer Income Tax Assistance Issue Committee AGENCY: Internal Revenue Service (IRS) Treasury. ACTION: Notice of meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Volunteer Income Tax Issue... Act, 5 U.S.C. App. (1988) that a meeting of the Taxpayer Advocacy Panel Volunteer Income Tax Issue...

  7. 75 FR 33894 - Open Meeting of the Taxpayer Advocacy Panel Earned Income Tax Credit Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-15

    ... Earned Income Tax Credit Project Committee AGENCY: Internal Revenue Service (IRS) Treasury. ACTION: Notice of meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Earned Income Tax Credit... Act, 5 U.S.C. App. (1988) that an open meeting of the Taxpayer Advocacy Panel Earned Income Tax Credit...

  8. 76 FR 17995 - Open Meeting of the Taxpayer Advocacy Panel Earned Income Tax Credit Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-31

    ... Earned Income Tax Credit Project Committee AGENCY: Internal Revenue Service (IRS) Treasury. ACTION: Notice of meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Earned Income Tax Credit... Act, 5 U.S.C. App. (1988) that an open meeting of the Taxpayer Advocacy Panel Earned Income Tax Credit...

  9. 76 FR 32024 - Open Meeting of the Taxpayer Advocacy Panel Earned Income Tax Credit Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-02

    ... Earned Income Tax Credit Project Committee AGENCY: Internal Revenue Service (IRS) Treasury. ACTION: Notice of Meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Earned Income Tax Credit... Act, 5 U.S.C. App. (1988) that an open meeting of the Taxpayer Advocacy Panel Earned Income Tax Credit...

  10. 75 FR 18955 - Open Meeting of the Taxpayer Advocacy Panel Earned Income Tax Credit Project Committee.

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-13

    ... Earned Income Tax Credit Project Committee. AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Earned Income Tax Credit... Act, 5 U.S.C. App. (1988) that an open meeting of the Taxpayer Advocacy Panel Earned Income Tax Credit...

  11. 75 FR 25316 - Open Meeting of the Taxpayer Advocacy Panel Earned Income Tax Credit Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-05-07

    ... Earned Income Tax Credit Project Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Earned Income Tax Credit... Act, 5 U.S.C. App. (1988) that an open meeting of the Taxpayer Advocacy Panel Earned Income Tax Credit...

  12. 75 FR 7540 - Open Meeting of the Taxpayer Advocacy Panel Earned Income Tax Credit Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-02-19

    ... Earned Income Tax Credit Project Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Earned Income Tax Credit... Act, 5 U.S.C. App. (1988) that an open meeting of the Taxpayer Advocacy Panel Earned Income Tax Credit...

  13. 76 FR 6188 - Open Meeting of the Taxpayer Advocacy Panel Earned Income Tax Credit Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-03

    ... Earned Income Tax Credit Project Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of meeting. SUMMARY: An open Meeting of the Taxpayer Advocacy Panel Earned Income Tax Credit... Panel Earned Income Tax Credit Project Committee will be held Monday, March 28, 2011, at 2 p.m., Eastern...

  14. 76 FR 22171 - Open Meeting of the Taxpayer Advocacy Panel Earned Income Tax Credit Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-20

    ... Earned Income Tax Credit Project Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Earned Income Tax Credit... Act, 5 U.S.C. App. (1988) that an open meeting of the Taxpayer Advocacy Panel Earned Income Tax Credit...

  15. 76 FR 2197 - Open Meeting of the Taxpayer Advocacy Panel Earned Income Tax Credit Project Committee.

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-01-12

    ... Earned Income Tax Credit Project Committee. AGENCY: Internal Revenue Service (IRS) Treasury. ACTION: Notice of meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Earned Income Tax Credit... Act, 5 U.S.C. App. (1988) that an open meeting of the Taxpayer Advocacy Panel Earned Income Tax Credit...

  16. 75 FR 4140 - Open Meeting of the Taxpayer Advocacy Panel Small Business/Self Employed Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-01-26

    ... suggestions on improving customer service at the Internal Revenue Service. DATES: The meeting will be held... DEPARTMENT OF THE TREASURY Internal Revenue Service Open Meeting of the Taxpayer Advocacy Panel Small Business/Self Employed Project Committee AGENCY: Internal Revenue Service (IRS) Treasury. ACTION...

  17. 75 FR 4139 - Open Meeting of the Taxpayer Advocacy Panel Volunteer Income Tax Assistance Issue Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-01-26

    ... suggestions on improving customer service at the Internal Revenue Service. DATES: The meeting will be held... DEPARTMENT OF THE TREASURY Internal Revenue Service Open Meeting of the Taxpayer Advocacy Panel Volunteer Income Tax Assistance Issue Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION...

  18. Panel workload assessment in US primary care: accounting for non-face-to-face panel management activities.

    PubMed

    Arndt, Brian; Tuan, Wen-Jan; White, Jennifer; Schumacher, Jessica

    2014-01-01

    An understanding of primary care provider (PCP) workload is an important consideration in establishing optimal PCP panel size. However, no widely acceptable measure of PCP workload exists that incorporates the effort involved with both non-face-to-face patient care activities and face-to-face encounters. Accounting for this gap is critical given the increase in non-face-to-face PCP activities that has accompanied electronic health records (EHRs) (eg, electronic messaging). Our goal was to provide a comprehensive assessment of perceived PCP workload, accounting for aspects of both face-to-face and non-face-to-face encounters. Internal medicine, family medicine, and pediatric PCPs completed a self-administered survey about the perceived workload involved with face-to-face and non-face-to-face panel management activities as well as the perceived challenge associated with caring for patients with particular biomedical, demographic, and psychosocial characteristics (n = 185). Survey results were combined with EHR data at the individual patient and PCP service levels to assess PCP panel workload, accounting for face-to-face and non-face-to-face utilization. Of the multiple face-to-face and non-face-to-face activities associated with routine primary care, PCPs considered hospital admissions, obstetric care, hospital discharges, and new patient preventive health visits to be greater workload than non-face-to-face activities such as telephone calls, electronic communication, generating letters, and medication refills. Total workload within PCP panels at the individual patient level varied by overall health status, and the total workload of non-face-to-face panel management activities associated with routine primary care was greater than the total workload associated with face-to-face encounters regardless of health status. We used PCP survey results coupled with EHR data to assess PCP workload associated with both face-to-face as well as non-face-to-face panel management

  19. Metallic artifacts from internal scaphoid fracture fixation screws: comparison between C-arm flat-panel, cone-beam, and multidetector computed tomography.

    PubMed

    Finkenstaedt, Tim; Morsbach, Fabian; Calcagni, Maurizio; Vich, Magdalena; Pfirrmann, Christian W A; Alkadhi, Hatem; Runge, Val M; Andreisek, Gustav; Guggenberger, Roman

    2014-08-01

    The aim of this study was to compare image quality and extent of artifacts from scaphoid fracture fixation screws using different computed tomography (CT) modalities and radiation dose protocols. Imaging of 6 cadaveric wrists with artificial scaphoid fractures and different fixation screws was performed in 2 screw positions (45° and 90° orientation in relation to the x/y-axis) using multidetector CT (MDCT) and 2 flat-panel CT modalities, C-arm flat-panel CT (FPCT) and cone-beam CT (CBCT), the latter 2 with low and standard radiation dose protocols. Mean cartilage attenuation and metal artifact-induced absolute Hounsfield unit changes (= artifact extent) were measured. Two independent radiologists evaluated different image quality criteria using a 5-point Likert-scale. Interreader agreements (Cohen κ) were calculated. Mean absolute Hounsfield unit changes and quality ratings were compared using Friedman and Wilcoxon signed-rank tests. Artifact extent was significantly smaller for MDCT and standard-dose FPCT compared with CBCT low- and standard-dose acquisitions (all P < 0.05). No significant differences in artifact extent among different screw types and scanning positions were noted (P > 0.05). Both MDCT and FPCT standard-dose protocols showed equal ratings for screw bone interface, fracture line, and trabecular bone evaluation (P = 0.06, 0.2, and 0.2, respectively) and performed significantly better than FPCT low- and CBCT low- and standard-dose acquisitions (all P < 0.05). Good interreader agreement was found for image quality comparisons (Cohen κ = 0.76-0.78). Both MDCT and FPCT standard-dose acquisition showed comparatively less metal-induced artifacts and better overall image quality compared with FPCT low-dose and both CBCT acquisitions. Flat-panel CT may provide sufficient image quality to serve as a versatile CT alternative for postoperative imaging of internally fixated wrist fractures.

  20. 75 FR 18955 - Open Meeting of the Taxpayer Advocacy Panel Tax Forms and Publications/MLI Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-13

    ... Tax Forms and Publications/MLI Project Committee AGENCY: Internal Revenue Service (IRS), Treasury... Publications/MLI Project Committee will be conducted. The Taxpayer Advocacy Panel is soliciting public comments... Taxpayer Advocacy Panel Tax Forms and Publications/MLI Project Committee will be held Thursday, May 13...

  1. KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility (OPF), United Space Alliance technicians replace the attachment points for the spars on the interior of a wing of Space Shuttle Atlantis. Reinforced Carbon Carbon (RCC) panels are mechanically attached to the wing with a series of floating joints - spars - to reduce loading on the panels caused by wing deflections. The aluminum and the metallic attachments are protected from exceeding temperature limits by internal insulation. The next launch of Atlantis will be on mission STS-114, a utilization and logistics flight to the International Space Station.

    NASA Image and Video Library

    2003-09-03

    KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility (OPF), United Space Alliance technicians replace the attachment points for the spars on the interior of a wing of Space Shuttle Atlantis. Reinforced Carbon Carbon (RCC) panels are mechanically attached to the wing with a series of floating joints - spars - to reduce loading on the panels caused by wing deflections. The aluminum and the metallic attachments are protected from exceeding temperature limits by internal insulation. The next launch of Atlantis will be on mission STS-114, a utilization and logistics flight to the International Space Station.

  2. View of Solar Array Panels taken during Expedition 16

    NASA Image and Video Library

    2007-12-09

    ISS016-E-015496 (9 Dec. 2007) --- Solar array panels of the International Space Station are featured in this image photographed by an Expedition 16 crewmember (out of frame) from a window on the station. The blackness of space and airglow of Earth's horizon provide the backdrop for the scene.

  3. Method of producing ceramic distribution members for solid state electrolyte cells

    NASA Technical Reports Server (NTRS)

    Clark, Douglas J. (Inventor); Galica, Leo M. (Inventor); Losey, Robert W. (Inventor); Suitor, Jerry W. (Inventor)

    1995-01-01

    A solid state electrolyte cells apparatus and method of producing is disclosed. The apparatus can be used for separating oxygen from an oxygen-containing feedstock or as a fuel cell for reacting fluids. Cells can be stacked so that fluids can be introduced and removed from the apparatus through ceramic distribution members having ports designed for distributing the fluids in parallel flow to and from each cell. The distribution members can also serve as electrodes to membranes or as membrane members between electrodes, The distribution member design does not contain any horizontal internal ports which allows the member to be thin. A method of tape casting in combination with an embossing method allows intricate radial ribs and bosses to be formed on each distribution member. The bosses serve as seals for the ports and allow the distribution members to be made without any horizontal internal ports.

  4. 78 FR 36304 - Open Meeting of the Taxpayer Advocacy Panel Toll-Free Phone Line Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-17

    ... Toll-Free Phone Line Project Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of Meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Toll-Free Phone Line Project... Act, 5 U.S.C. App. (1988) that an open meeting of the Taxpayer Advocacy Panel Toll-Free Phone Line...

  5. 77 FR 74920 - Open Meeting of the Taxpayer Advocacy Panel Toll-Free Phone Line Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-12-18

    ... Toll-Free Phone Line Project Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Toll-Free Phone Line Project... Advocacy Panel Toll-Free Phone Line Project Committee will be held Tuesday, January 15, 2013 at 11:00 a.m...

  6. 75 FR 11998 - Open meeting of the Taxpayer Advocacy Panel Earned Income Tax Credit Issue Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-12

    ... Earned Income Tax Credit Issue Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of Meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Earned Income Tax Credit Issue... Advocacy Panel Earned Income Tax Credit Issue Committee will be held Tuesday, April 20, 2010 from 8 a.m. to...

  7. PANEL LIBRARY AND EDITOR

    NASA Technical Reports Server (NTRS)

    Raible, E.

    1994-01-01

    The Panel Library and Editor is a graphical user interface (GUI) builder for the Silicon Graphics IRIS workstation family. The toolkit creates "widgets" which can be manipulated by the user. Its appearance is similar to that of the X-Windows System. The Panel Library is written in C and is used by programmers writing user-friendly mouse-driven applications for the IRIS. GUIs built using the Panel Library consist of "actuators" and "panels." Actuators are buttons, dials, sliders, or other mouse-driven symbols. Panels are groups of actuators that occupy separate windows on the IRIS workstation. The application user can alter variables in the graphics program, or fire off functions with a click on a button. The evolution of data values can be tracked with meters and strip charts, and dialog boxes with text processing can be built. Panels can be stored as icons when not in use. The Panel Editor is a program used to interactively create and test panel library interfaces in a simple and efficient way. The Panel Editor itself uses a panel library interface, so all actions are mouse driven. Extensive context-sensitive on-line help is provided. Programmers can graphically create and test the user interface without writing a single line of code. Once an interface is judged satisfactory, the Panel Editor will dump it out as a file of C code that can be used in an application. The Panel Library (v9.8) and Editor (v1.1) are written in C-Language (63%) and Scheme, a dialect of LISP, (37%) for Silicon Graphics 4D series workstations running IRIX 3.2 or higher. Approximately 10Mb of disk space is required once compiled. 1.5Mb of main memory is required to execute the panel editor. This program is available on a .25 inch streaming magnetic tape cartridge in UNIX tar format for an IRIS, and includes a copy of XScheme, the public-domain Scheme interpreter used by the Panel Editor. The Panel Library Programmer's Manual is included on the distribution media. The Panel Library and

  8. Two-dimensional character of internal rotation of furfural and other five-member heterocyclic aromatic aldehydes.

    PubMed

    Bataev, Vadim A; Pupyshev, Vladimir I; Godunov, Igor A

    2016-05-15

    The features of nuclear motion corresponding to the rotation of the formyl group (CHO) are studied for the molecules of furfural and some other five-member heterocyclic aromatic aldehydes by the use of MP2/6-311G** quantum chemical approximation. It is demonstrated that the traditional one-dimensional models of internal rotation for the molecules studied have only limited applicability. The reason is the strong kinematic interaction of the rotation of the CHO group and out-of-plane CHO deformation that is realized for the molecules under consideration. The computational procedure based on the two-dimensional approximation is considered for low lying vibrational states as more adequate to the problem. Copyright © 2016 Elsevier B.V. All rights reserved.

  9. 75 FR 62552 - Center for Scientific Review; Notice of Closed Meetings

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-10-12

    ... Special Emphasis Panel, Member Conflict: Risk Prevention and Health Behavior. Date: November 5, 2010. Time... Special Emphasis Panel, PAR-08-222: International Brain Disorders. Date: November 19, 2010. Time: 8:30 a.m...

  10. EMSL Geochemistry, Biogeochemistry and Subsurface Science-Science Theme Advisory Panel Meeting

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Brown, Gordon E.; Chaka, Anne; Shuh, David K.

    2011-08-01

    This report covers the topics of discussion and the recommendations of the panel members. On December 8 and 9, 2010, the Geochemistry, Biogeochemistry, and Subsurface Science (GBSS) Science Theme Advisory Panel (STAP) convened for a more in-depth exploration of the five Science Theme focus areas developed at a similar meeting held in 2009. The goal for the fiscal year (FY) 2011 meeting was to identify potential topical areas for science campaigns, necessary experimental development needs, and scientific members for potential research teams. After a review of the current science in each of the five focus areas, the 2010 STAP discussionsmore » successfully led to the identification of one well focused campaign idea in pore-scale modeling and five longer-term potential research campaign ideas that would likely require additional workshops to identify specific research thrusts. These five campaign areas can be grouped into two categories: (1) the application of advanced high-resolution, high mass accuracy experimental techniques to elucidate the interplay between geochemistry and microbial communities in terrestrial ecosystems and (2) coupled computation/experimental investigations of the electron transfer reactions either between mineral surfaces and outer membranes of microbial cells or between the outer and inner membranes of microbial cells.« less

  11. 75 FR 33894 - Open Meeting of the Taxpayer Advocacy Panel Tax Forms and Publications/MLI Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-15

    ... Tax Forms and Publications/MLI Project Committee AGENCY: Internal Revenue Service (IRS), Treasury... Publications/MLI Project Committee will be conducted. The Taxpayer Advocacy Panel is soliciting public comments... Panel Tax Forms and Publications/MLI Project Committee will be held Thursday, July 8, 2010, at 1 p.m...

  12. 75 FR 10865 - Open Meeting of the Taxpayer Advocacy Panel Tax Forms and Publications/MLI Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-09

    ... Tax Forms and Publications/MLI Project Committee AGENCY: Internal Revenue Service (IRS), Treasury... Publications/MLI Project Committee will be conducted. The Taxpayer Advocacy Panel is soliciting public comments... Panel Tax Forms and Publications/MLI Project Committee will be held Thursday, April 8, 2010, at 1 p.m...

  13. 75 FR 47347 - Open Meeting of the Taxpayer Advocacy Panel Tax Forms and Publications/MLI Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-05

    ... Tax Forms and Publications/MLI Project Committee AGENCY: Internal Revenue Service (IRS), Treasury... Publications/MLI Project Committee will be conducted. The Taxpayer Advocacy Panel is soliciting public comments... Panel Tax Forms and Publications/MLI Project Committee will be held Thursday, September 9, 2010, at 1 p...

  14. 77 FR 55525 - Open Meeting of the Taxpayer Advocacy Panel Face-to-Face Service Methods Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-10

    ... Face-to-Face Service Methods Project Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Face-to-Face Service Methods Project Committee will be conducted. The Taxpayer Advocacy Panel is soliciting public comments, ideas, and...

  15. Computational and experimental studies of microvascular void features for passive-adaptation of structural panel dynamic properties

    NASA Astrophysics Data System (ADS)

    Sears, Nicholas C.; Harne, Ryan L.

    2018-01-01

    The performance, integrity, and safety of built-up structural systems are critical to their effective employment in diverse engineering applications. In conflict with these goals, harmonic or random excitations of structural panels may promote large amplitude oscillations that are particularly harmful when excitation energies are concentrated around natural frequencies. This contributes to fatigue concerns, performance degradation, and failure. While studies have considered active or passive damping treatments that adapt material characteristics and configurations for structural control, it remains to be understood how vibration properties of structural panels may be tailored via internal material transitions. Motivated to fill this knowledge gap, this research explores an idea of adapting the static and dynamic material distribution of panels through embedded microvascular channels and strategically placed voids that permit the internal movement of fluids within the panels for structural dynamic control. Finite element model and experimental investigations probe how redistributing material in the form of microscale voids influences the global vibration modes and natural frequencies of structural panels. Through parameter studies, the relationships among void shape, number, size, and location are quantified towards their contribution to the changing structural dynamics. For the panel composition and boundary conditions considered in this report, the findings reveal that transferring material between strategically placed voids may result in eigenfrequency changes as great as 10.0, 5.0, and 7.4% for the first, second, and third modes, respectively.

  16. International Cooperation in the Field of International Space Station (ISS) Payload Safety

    NASA Astrophysics Data System (ADS)

    Grayson, C.; Sgobba, T.; Larsen, A.; Rose, S.; Heimann, T.; Ciancone, M.; Mulhern, V.

    2005-12-01

    In the frame of the International Space Station (ISS) Program cooperation, in 1998 the European Space Agency (ESA) approached the National Aeronautics and Space Administration (NASA) with the unique concept of a Payload Safety Review Panel (PSRP) "franchise" based at the European Space Technology Center (ESTEC), where the panel would be capable of autonomously reviewing flight hardware for safety. This paper will recount the course of an ambitious idea as it progressed into a fully functional reality. It will show how a panel initially conceived at NASA to serve a national programme has evolved into an international safety cooperation asset. The PSRP established at NASA began reviewing ISS payloads approximately in late 1994 or early 1995 as an expansion of the pre- existing Shuttle Program PSRP. This paper briefly describes the fundamental Shuttle safety process and the establishment of the safety requirements for payloads intending to use the Space Transportation System and ISS. The paper will also offer some historical statistics about the experiments that completed the payload safety process for Shuttle and ISS. The paper then presents the background of ISS agreements and international treaties that had to be considered when establishing the ESA PSRP. The paper will expound upon the detailed franchising model, followed by an outline of the cooperation charter approved by the NASA Associate Administrator, Office of Space Flight, and ESA Director of Manned Spaceflight and Microgravity. The paper will then address the resulting ESA PSRP implementation and its success statistics to date. Additionally, the paper presents ongoing developments with the Japan Aerospace Exploration Agency (JAXA). The discussion will conclude with ideas for future developments, such to achieve a fully integrated international system of payload safety panels for ISS.

  17. The GRADE evidence-to-decision framework: a report of its testing and application in 15 international guideline panels.

    PubMed

    Neumann, Ignacio; Brignardello-Petersen, Romina; Wiercioch, Wojtek; Carrasco-Labra, Alonso; Cuello, Carlos; Akl, Elie; Mustafa, Reem A; Al-Hazzani, Waleed; Etxeandia-Ikobaltzeta, Itziar; Rojas, Maria Ximena; Falavigna, Maicon; Santesso, Nancy; Brozek, Jan; Iorio, Alfonso; Alonso-Coello, Pablo; Schünemann, Holger J

    2016-07-15

    Judgments underlying guideline recommendations are seldom recorded and presented in a systematic fashion. The GRADE Evidence-to-Decision Framework (EtD) offers a transparent way to record and report guideline developers' judgments. In this paper, we report the experiences with the EtD frameworks in 15 real guideline panels. Following the guideline panel meetings, we asked methodologists participating in the panel to provide feedback regarding the EtD framework. They were instructed to consider their own experience and the feedback collected from the rest of the panel. Two investigators independently summarized the responses and jointly interpreted the data using pre-specified domains as coding system. We asked methodologists to review the results and provide further input to improve the structure of the EtDs iteratively. The EtD framework was well received, and the comments were generally positive. Methodologists felt that in a real guideline panel, the EtD framework helps structuring a complex process through relatively simple steps in an explicit and transparent way. However, some sections (e.g., "values and preferences" and "balance between benefits and harms") required further development and clarification that were considered in the current version of the EtD framework. The use of an EtD framework in guideline development offers a structured and explicit way to record and report the judgments and discussion of guideline panels during the formulation of recommendations. In addition, it facilitates the formulation of recommendations, assessment of their strength, and identifying gaps in research.

  18. Panel 5: Immunology.

    PubMed

    Kyd, Jennelle M; Hotomi, Muneki; Kono, Masamitsu; Kurabi, Arwa; Pichichero, Michael; Ryan, Allen; Swords, W Edward; Thornton, Ruth

    2017-04-01

    Objective To perform a state-of-the-art review of the literature from January 2012 through May 2015 on studies that advanced our knowledge of the innate and adaptive immunology related to otitis media. This review also proposes future directions for research in this area. Data Sources PubMed database of the National Library of Medicine. Review Methods Three subpanels comprising experts in the field focused on sections relevant to cytokines, innate immunity, and adaptive immunity. The review focused on animal, cell line, and human studies and was critical in relation to the recommendations from the previous publication and for determination of the proposed goals and priorities. The panel met at the 18th International Symposium on Recent Advances in Otitis Media in June 2015 to consolidate its prior search results and discuss, plan, and refine the review. The panel approved the final draft. Conclusion From 2012 to 2014, tremendous progresses in immunology of otitis media were established-especially in the areas of innate immunity associated with the pathogenesis of otitis media. Implications for Practice The advances of the past 4 years formed the basis for a series of short- and long-term research goals in an effort to guide the field. Accomplishing these goals will provide opportunities for the development of novel interventions, including new ways to better treat and prevent otitis media, especially for recurrent otitis media.

  19. Hypervelocity Impact Performance of Open Cell Foam Core Sandwich Panel Structures

    NASA Technical Reports Server (NTRS)

    Ryan, S.; Ordonez, E.; Christiansen, E. L.; Lear, D. M.

    2010-01-01

    Open cell metallic foam core sandwich panel structures are of interest for application in spacecraft micrometeoroid and orbital debris shields due to their novel form and advantageous structural and thermal performance. Repeated shocking as a result of secondary impacts upon individual foam ligaments during the penetration process acts to raise the thermal state of impacting projectiles ; resulting in fragmentation, melting, and vaporization at lower velocities than with traditional shielding configurations (e.g. Whipple shield). In order to characterize the protective capability of these structures, an extensive experimental campaign was performed by the Johnson Space Center Hypervelocity Impact Technology Facility, the results of which are reported in this paper. Although not capable of competing against the protection levels achievable with leading heavy shields in use on modern high-risk vehicles (i.e. International Space Station modules), metallic foam core sandwich panels are shown to provide a substantial improvement over comparable structural panels and traditional low weight shielding alternatives such as honeycomb sandwich panels and metallic Whipple shields. A ballistic limit equation, generalized in terms of panel geometry, is derived and presented in a form suitable for application in risk assessment codes.

  20. Space Network Interoperability Panel (SNIP) study

    NASA Technical Reports Server (NTRS)

    Ryan, Thomas; Lenhart, Klaus; Hara, Hideo

    1991-01-01

    The Space Network Interoperability Panel (SNIP) study is a tripartite study that involves the National Aeronautics and Space Administration (NASA), the European Space Agency (ESA), and the National Space Development Agency (NASDA) of Japan. SNIP involves an ongoing interoperability study of the Data Relay Satellite (DRS) Systems of the three organizations. The study is broken down into two parts; Phase one deals with S-band (2 GHz) interoperability and Phase two deals with Ka-band (20/30 GHz) interoperability (in addition to S-band). In 1987 the SNIP formed a Working Group to define and study operations concepts and technical subjects to assure compatibility of the international data relay systems. Since that time a number of Panel and Working Group meetings have been held to continue the study. Interoperability is of interest to the three agencies because it offers a number of potential operation and economic benefits. This paper presents the history and status of the SNIP study.

  1. Reinforced Honeycomb Panels

    NASA Technical Reports Server (NTRS)

    Bhat, Balakrishna T.; Akutagawa, Wesley; Wang, Taylor G.; Barber, Dan

    1989-01-01

    New honeycomb panel structure has increased strength and stiffness with little increase in weight. Some or all of walls of honeycomb cells reinforced with honeycomb panels having smaller cells, lightweight foam, or other reinforcing material. Strong, lightweight reinforced panels used in aircraft, car and truck bodies, cabinets for equipment and appliances, and buildings.

  2. 77 FR 47165 - Open Meeting of the Taxpayer Advocacy Panel Toll-Free Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-07

    ... Toll-Free Project Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Toll-Free Project Committee will be conducted. The... at the Internal Revenue Service. DATES: The meeting will be held Tuesday, September 4, 2012. FOR...

  3. Sharing data for public health research by members of an international online diabetes social network.

    PubMed

    Weitzman, Elissa R; Adida, Ben; Kelemen, Skyler; Mandl, Kenneth D

    2011-04-27

    Surveillance and response to diabetes may be accelerated through engaging online diabetes social networks (SNs) in consented research. We tested the willingness of an online diabetes community to share data for public health research by providing members with a privacy-preserving social networking software application for rapid temporal-geographic surveillance of glycemic control. SN-mediated collection of cross-sectional, member-reported data from an international online diabetes SN entered into a software application we made available in a "Facebook-like" environment to enable reporting, charting and optional sharing of recent hemoglobin A1c values through a geographic display. Self-enrollment by 17% (n = 1,136) of n = 6,500 active members representing 32 countries and 50 US states. Data were current with 83.1% of most recent A1c values reported obtained within the past 90 days. Sharing was high with 81.4% of users permitting data donation to the community display. 34.1% of users also displayed their A1cs on their SN profile page. Users selecting the most permissive sharing options had a lower average A1c (6.8%) than users not sharing with the community (7.1%, p = .038). 95% of users permitted re-contact. Unadjusted aggregate A1c reported by US users closely resembled aggregate 2007-2008 NHANES estimates (respectively, 6.9% and 6.9%, p = 0.85). Success within an early adopter community demonstrates that online SNs may comprise efficient platforms for bidirectional communication with and data acquisition from disease populations. Advancing this model for cohort and translational science and for use as a complementary surveillance approach will require understanding of inherent selection and publication (sharing) biases in the data and a technology model that supports autonomy, anonymity and privacy.

  4. Expression of ESBL-like activity in infrequently encountered members of the family Enterobacteriaceae.

    PubMed

    Abbott, Sharon L; Lidgard, Janice A; Cheung, Wendy K W; Obeso, Martha N; Berrada, Zenda L; Janda, J Michael

    2012-03-01

    A collection of 94 unusual members of the Enterobacteriaceae were screened for the presence of extended spectrum β-lactamases (ESBLs) using the MicroScan ESβL plus dried confirmation panel. Presumptively positive strains were then confirmed for the presence of an ESBL by double disk diffusion, E-test strips (AB Biodisk, Solna, Sweden) and PCR for SHV, TEM, and CTX-M2 genes. Of the 18 strains initially positive on the ESβL panel only three strains (Leminorella grimontii, Klebsiella ozaenae, and Kluyvera ascorbata) were positive by confirmation methods. These results suggest laboratories should be cautious regarding the methodology employed in screening for the presence of ESBLs in enteric bacteria. However, it should be noted that of the 94 strains, 29 were found to be resistant to two or more of the antibiotics present in the MicroScan ESβL plus panel indicating that there are potential treatment issues with these organisms despite their lack of ESBLs.

  5. Silica powders for powder evacuated thermal insulating panel and method

    DOEpatents

    Harris, Michael T.; Basaran, Osman A.; Kollie, Thomas G.; Weaver, Fred J.

    1996-01-01

    A powder evacuated thermal insulating panel using generally spherical and porous silica particles of a median size less than about 100 nanometers in diameter, a pour packing density of about 0.4 to 0.6 g/cm.sup.3 and an external surface area in the range of about 90 to 600 m.sup.2/ g is described. The silica powders are prepared by reacting a tetraakyl silicate with ammonia and water in an alcohol solvent, distilling the solution after the reaction to remove the ammonia and recover the alcohol. The resulting aqueous slurry was dried, ball-milled, and dried again to provide the silica particles with defined internal and external porosity. The nanometer size and the large external surface area of the silica particles along with the internal and external porosity of the silica particles provide powder evacuated thermal insulating panels with significantly higher R-values than obtainable using previously known silica powders.

  6. Silica powders for powder evacuated thermal insulating panel and method

    DOEpatents

    Harris, Michael T.; Basaran, Osman A.; Kollie, Thomas G.; Weaver, Fred J.

    1994-01-01

    A powder evacuated thermal insulating panel using generally spherical and porous silica particles of a median size less than about 100 nanometers in diameter, a pour packing density of about 0.4 to 0.6 g/cm.sup.3 and an external surface area in the range of about 90 to 600 m.sup.2 /g is described. The silica powders are prepared by reacting a tetraakyl silicate with ammonia and water in an alcohol solvent, distilling the solution after the reaction to remove the ammonia and recover the alcohol. The resulting aqueous slurry was dried, ball-milled, and dried again to provide the silica particles with defined internal and external porosity. The nanometer size and the large external surface area of the silica particles along with the internal and external porosity of the silica particles provide powder evacuated thermal insulating panels with significantly higher R-values than obtainable using previously known silica powders.

  7. Silica powders for powder evacuated thermal insulating panel and method

    DOEpatents

    Harris, Michael T.; Basaran, Osman A.; Kollie, Thomas G.; Weaver, Fred J.

    1995-01-01

    A powder evacuated thermal insulating panel using generally spherical and porous silica particles of a median size less than about 100 nanometers in diameter, a pour packing density of about 0.4 to 0.6 g/cm.sup.3 and an external surface area in the range of about 90 to 600 m.sup.2/ g is described. The silica powders are prepared by reacting a tetraakyl silicate with ammonia and water in an alcohol solvent, distilling the solution after the reaction to remove the ammonia and recover the alcohol. The resulting aqueous slurry was dried, ball-milled, and dried again to provide the silica particles with defined internal and external porosity. The nanometer size and the large external surface area of the silica particles along with the internal and external porosity of the silica particles provide powder evacuated thermal insulating panels with significantly higher R-values than obtainable using previously known silica powders.

  8. Silica powders for powder evacuated thermal insulating panel and method

    DOEpatents

    Harris, M.T.; Basaran, O.A.; Kollie, T.G.; Weaver, F.J.

    1996-01-02

    A powder evacuated thermal insulating panel using generally spherical and porous silica particles of a median size less than about 100 nanometers in diameter, a pour packing density of about 0.4 to 0.6 g/cm{sup 3} and an external surface area in the range of about 90 to 600 m{sup 2}/g is described. The silica powders are prepared by reacting a tetraalkyl silicate with ammonia and water in an alcohol solvent, distilling the solution after the reaction to remove the ammonia and recover the alcohol. The resulting aqueous slurry was dried, ball-milled, and dried again to provide the silica particles with defined internal and external porosity. The nanometer size and the large external surface area of the silica particles along with the internal and external porosity of the silica particles provide powder evacuated thermal insulating panels with significantly higher R-values than obtainable using previously known silica powders. 2 figs.

  9. Solar reflection panels

    DOEpatents

    Diver, Jr., Richard B.; Grossman, James W [Albuquerque, NM; Reshetnik, Michael [Boulder, CO

    2006-07-18

    A solar collector comprising a glass mirror, and a composite panel, wherein the back of the mirror is affixed to a front surface of the composite panel. The composite panel comprises a front sheet affixed to a surface of a core material, preferably a core material comprising a honeycomb structure, and a back sheet affixed to an opposite surface of the core material. The invention may further comprise a sealing strip, preferably comprising EPDM, positioned between the glass mirror and the front surface of the composite panel. The invention also is of methods of making such solar collectors.

  10. 77 FR 40411 - Open Meeting of the Taxpayer Advocacy Panel Face-to-Face Service Methods Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-09

    ... Face-to-Face Service Methods Project Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Face-to-Face Service Methods... Act, 5 U.S.C. App. (1988) that a meeting of the Taxpayer Advocacy Panel Face-to-Face Service Methods...

  11. 77 FR 8328 - Open Meeting of the Taxpayer Advocacy Panel Face-to-Face Service Methods Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-14

    ... Face-to-Face Service Methods Project Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Face-to-Face Service Methods... Panel Face-to-Face Service Methods Project Committee will be held Tuesday, March 13, 2012, at 2 p.m...

  12. 77 FR 37101 - Open Meeting of the Taxpayer Advocacy Panel Face-to-Face Service Methods Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-20

    ... Face-to-Face Service Methods Project Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Face-to-Face Service Methods... Act, 5 U.S.C. App. (1988) that a meeting of the Taxpayer Advocacy Panel Face-to-Face Service Methods...

  13. 77 FR 21157 - Open Meeting of the Taxpayer Advocacy Panel Face-to-Face Service Methods Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-09

    ... Face-to-Face Service Methods Project Committee AGENCY: Internal Revenue Service (IRS) Treasury. ACTION: Notice of meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Face-to-Face Service Methods... Act, 5 U.S.C. App. (1988) that a meeting of the Taxpayer Advocacy Panel Face-to-Face Service Methods...

  14. An Analysis of North Carolina's Rural Health Problems as Perceived by County Rural Development Panels.

    ERIC Educational Resources Information Center

    Hamilton, Vance E., Comp.

    A State Task Force on Rural Health was formed (January 1973) by the State Rural Development Committee to identify and analyze major rural health problems in North Carolina and to recommend alleviation strategies. The Task Force submitted open-ended questionnaires to members of the County Rural Development Panels to secure their perceptions of…

  15. KENNEDY SPACE CENTER, FLA. - Dan Phillips (left) and Donald Nielen, with United Space Alliance, watch a monitor as Jim Landy, NDE specialist with USA, prepares to examine a Reinforced Carbon Carbon panel (on the table, center) using flash thermography. A relatively new procedure at KSC, thermography uses high intensity light to heat areas of the panels. The panels are then immediately scanned with an infrared camera. As the panels cool, any internal flaws are revealed. The gray carbon composite RCC panels are attached to the leading edge of the wing of the orbiters. They have sufficient strength to withstand the aerodynamic forces experienced during launch and reentry, which can reach as high as 800 pounds per square foot. The operating range of RCC is from minus 250º F to about 3,000º F, the temperature produced by friction with the atmosphere during reentry. The panels will be installed on the orbiter Discovery, designated for the first Return to Flight mission, STS-114.

    NASA Image and Video Library

    2004-03-10

    KENNEDY SPACE CENTER, FLA. - Dan Phillips (left) and Donald Nielen, with United Space Alliance, watch a monitor as Jim Landy, NDE specialist with USA, prepares to examine a Reinforced Carbon Carbon panel (on the table, center) using flash thermography. A relatively new procedure at KSC, thermography uses high intensity light to heat areas of the panels. The panels are then immediately scanned with an infrared camera. As the panels cool, any internal flaws are revealed. The gray carbon composite RCC panels are attached to the leading edge of the wing of the orbiters. They have sufficient strength to withstand the aerodynamic forces experienced during launch and reentry, which can reach as high as 800 pounds per square foot. The operating range of RCC is from minus 250º F to about 3,000º F, the temperature produced by friction with the atmosphere during reentry. The panels will be installed on the orbiter Discovery, designated for the first Return to Flight mission, STS-114.

  16. Internal absorber solar collector

    DOEpatents

    Sletten, Carlyle J.; Herskovitz, Sheldon B.; Holt, F. S.; Sletten, E. J.

    1981-01-01

    Thin solar collecting panels are described made from arrays of small rod collectors consisting of a refracting dielectric rod lens with an absorber imbedded within it and a reflecting mirror coated on the back side of the dielectric rod. Non-tracking collector panels on vertical walls or roof tops receive approximately 90% of solar radiation within an acceptance zone 60.degree. in elevation angle by 120.degree. or more in the azimuth sectors with a collector concentration ratio of approximately 3.0. Miniaturized construction of the circular dielectric rods with internal absorbers reduces the weight per area of glass, plastic and metal used in the collector panels. No external parts or insulation are needed as heat losses are low due to partial vacuum or low conductivity gas surrounding heated portions of the collector. The miniature internal absorbers are generally made of solid copper with black selective surface and the collected solar heat is extracted at the collector ends by thermal conductivity along the absorber rods. Heat is removed from end fittings by use of liquid circulants. Several alternate constructions are provided for simplifying collector panel fabrication and for preventing the thermal expansion and contraction of the heated absorber or circulant tubes from damaging vacuum seals. In a modified version of the internal absorber collector, oil with temperature dependent viscosity is pumped through a segmented absorber which is now composed of closely spaced insulated metal tubes. In this way the circulant is automatically diverted through heated portions of the absorber giving higher collector concentration ratios than theoretically possible for an unsegmented absorber.

  17. 76 FR 11314 - Art Advisory Panel-Notice of Availability of Report of 2010 Closed Meetings

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-01

    ... DEPARTMENT OF THE TREASURY Internal Revenue Service Art Advisory Panel--Notice of Availability of..., the Government in the Sunshine Act, a report summarizing the closed meeting activities of the Art... at http://www.irs.gov . FOR FURTHER INFORMATION CONTACT: Joseph Bothwell, AP:TPV:ART, Internal...

  18. 76 FR 11314 - Art Advisory Panel-Notice of Availability of Report of 2009 Closed Meetings

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-01

    ... DEPARTMENT OF THE TREASURY Internal Revenue Service Art Advisory Panel--Notice of Availability of..., the Government in the Sunshine Act, a report summarizing the closed meeting activities of the Art... at http://www.irs.gov . FOR FURTHER INFORMATION CONTACT: Joseph Bothwell, AP:TPV:ART, Internal...

  19. Ceramic distribution members for solid state electrolyte cells and method of producing

    NASA Technical Reports Server (NTRS)

    Clark, Douglas J. (Inventor); Galica, Leo M. (Inventor); Losey, Robert W. (Inventor); Suitor, Jerry W. (Inventor)

    1993-01-01

    A solid state electrolyte cells apparatus and method of producing is disclosed. The apparatus can be used for separating oxygen from an oxygen-containing feedstock or as a fuel cell for reacting fluids. Cells can be stacked so that fluids can be introduced and removed from the apparatus through ceramic distribution members having ports designed for distributing the fluids in parallel flow to and from each cell. The distribution members can also serve as electrodes to membranes or as membrane members between electrodes. The distribution member design does not contain any horizontal internal ports which allows the member to be thin. A method of tape casting in combination with an embossing method allows intricate radial ribs and bosses to be formed on each distribution member. The bosses serve as seals for the ports and allow the distribution members to be made without any horizontal internal ports.

  20. Flutter Research on Skin Panels

    NASA Technical Reports Server (NTRS)

    Kordes, Eldon E.; Tuovila, Weimer J.; Guy, Lawrence D.

    1960-01-01

    Representative experimental results are presented to show the current status of the panel flutter problem. Results are presented for unstiffened rectangular panels and for rectangular panels stiffened by corrugated backing. Flutter boundaries are established for all types of panels when considered on the basis of equivalent isotropic plates. The effects of Mach number, differential pressure, and aerodynamic heating on panel flutter are discussed. A flutter analysis of orthotropic panels is presented in the appendix.

  1. Large thermal protection system panel

    NASA Technical Reports Server (NTRS)

    Weinberg, David J. (Inventor); Myers, Franklin K. (Inventor); Tran, Tu T. (Inventor)

    2003-01-01

    A protective panel for a reusable launch vehicle provides enhanced moisture protection, simplified maintenance, and increased temperature resistance. The protective panel includes an outer ceramic matrix composite (CMC) panel, and an insulative bag assembly coupled to the outer CMC panel for isolating the launch vehicle from elevated temperatures and moisture. A standoff attachment system attaches the outer CMC panel and the bag assembly to the primary structure of the launch vehicle. The insulative bag assembly includes a foil bag having a first opening shrink fitted to the outer CMC panel such that the first opening and the outer CMC panel form a water tight seal at temperatures below a desired temperature threshold. Fibrous insulation is contained within the foil bag for protecting the launch vehicle from elevated temperatures. The insulative bag assembly further includes a back panel coupled to a second opening of the foil bag such that the fibrous insulation is encapsulated by the back panel, the foil bag, and the outer CMC panel. The use of a CMC material for the outer panel in conjunction with the insulative bag assembly eliminates the need for waterproofing processes, and ultimately allows for more efficient reentry profiles.

  2. 75 FR 39330 - Open Meeting of the Area 5 Taxpayer Advocacy Panel (Including the States of Iowa, Kansas...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-08

    ... DEPARTMENT OF THE TREASURY Internal Revenue Service Open Meeting of the Area 5 Taxpayer Advocacy Panel (Including the States of Iowa, Kansas, Minnesota, Missouri, Nebraska, Oklahoma, and Texas) AGENCY... Federal Advisory Committee Act, 5 U.S.C. App. (1988) that a meeting of the Area 5 Taxpayer Advocacy Panel...

  3. 75 FR 10864 - Open Meeting of the Area 5 Taxpayer Advocacy Panel (Including the States of Iowa, Kansas...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-09

    ... DEPARTMENT OF THE TREASURY Internal Revenue Service Open Meeting of the Area 5 Taxpayer Advocacy Panel (Including the States of Iowa, Kansas, Minnesota, Missouri, Nebraska, Oklahoma, and Texas) AGENCY... Federal Advisory Committee Act, 5 U.S.C. App. (1988) that a meeting of the Area 5 Taxpayer Advocacy Panel...

  4. Aerospace Safety Advisory Panel

    NASA Technical Reports Server (NTRS)

    2002-01-01

    This report presents the results of the Aerospace Safety Advisory Panel (ASAP) activities during 2002. The format of the report has been modified to capture a long-term perspective. Section II is new and highlights the Panel's view of NASA's safety progress during the year. Section III contains the pivotal safety issues facing NASA in the coming year. Section IV includes the program area findings and recommendations. The Panel has been asked by the Administrator to perform several special studies this year, and the resulting white papers appear in Appendix C. The year has been filled with significant achievements for NASA in both successful Space Shuttle operations and International Space Station (ISS) construction. Throughout the year, safety has been first and foremost in spite of many changes throughout the Agency. The relocation of the Orbiter Major Modifications (OMMs) from California to Kennedy Space Center (KSC) appears very successful. The transition of responsibilities for program management of the Space Shuttle and ISS programs from Johnson Space Center (JSC) to NASA Headquarters went smoothly. The decision to extend the life of the Space Shuttle as the primary NASA vehicle for access to space is viewed by the Panel as a prudent one. With the appropriate investments in safety improvements, in maintenance, in preserving appropriate inventories of spare parts, and in infrastructure, the Space Shuttle can provide safe and reliable support for the ISS for the foreseeable future. Indications of an aging Space Shuttle fleet occurred on more than one occasion this year. Several flaws went undetected in the early prelaunch tests and inspections. In all but one case, the problems were found prior to launch. These incidents were all handled properly and with safety as the guiding principle. Indeed, launches were postponed until the problems were fully understood and mitigating action could be taken. These incidents do, however, indicate the need to analyze the

  5. COTS Initiative Panel Discussion

    NASA Image and Video Library

    2013-11-13

    L-R: Alan Lindenmoyer, Manager of Commercial Crew and Cargo Program, NASA; Gwynne Shotwell, President, SpaceX; Frank Culbertson, Executive Vice President and General Manager, Orbital Sciences Advanced Programs Group; Frank Slazer, Vice President of Space Systems, Aerospace Industries Association and Phil McAlister, Director of Commercial Spaceflight Development at NASA, participate in a panel discussion on the Commercial Orbital Transportation Services (COTS) initiative at NASA Headquarters in Washington on Wednesday, November 13, 2013. Through COTS, NASA's partners Space Exploration Technologies Corp. (SpaceX) and Orbital Sciences Corp., developed new U.S. rockets and spacecraft, launched from U.S. soil, capable of transporting cargo to low-Earth orbit and the International Space Station. Photo Credit: (NASA/Jay Westcott)

  6. 77 FR 33810 - Art Advisory Panel-Notice of Availability of Report of 2011 Closed Meetings

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-07

    ... DEPARTMENT OF THE TREASURY Internal Revenue Service Art Advisory Panel--Notice of Availability of..., the Government in the Sunshine Act, a report summarizing the closed meeting activities of the Art... at www.irs.gov . FOR FURTHER INFORMATION CONTACT: Ruth Vriend, AP:TPV:ART, Internal Revenue Service...

  7. The “Virtual” Panel: A Computerized Model for LGBT Speaker Panels

    PubMed Central

    Beasley, Christopher; Torres-Harding, Susan; Pedersen, Paula J.

    2012-01-01

    Recent societal trends indicate more tolerance for homosexuality, but prejudice remains on college campuses. Speaker panels are commonly used in classrooms as a way to educate students about sexual diversity and decrease negative attitudes toward sexual diversity. The advent of computer delivered instruction presents a unique opportunity to broaden the impact of traditional speaker panels. The current investigation examined the influence of an interactive “virtual” gay and lesbian speaker panel on cognitive, affective, and behavioral homonegativity. Findings suggest the computer-administered panel is lowers homonegativity, particularly for affective experiential homonegativity. The implications of these findings for research and practice are discussed. PMID:23646036

  8. Hepatic (Liver) Function Panel

    MedlinePlus

    ... Educators Search English Español Blood Test: Hepatic (Liver) Function Panel KidsHealth / For Parents / Blood Test: Hepatic (Liver) ... kidneys ) is working. What Is a Hepatic (Liver) Function Panel? A liver function panel is a blood ...

  9. Aerospace Safety Advisory Panel

    NASA Technical Reports Server (NTRS)

    1999-01-01

    This report covers the activities of the Aerospace Safety Advisory Panel (ASAP) for calendar year 1998-a year of sharp contrasts and significant successes at NASA. The year opened with the announcement of large workforce cutbacks. The slip in the schedule for launching the International Space Station (ISS) created a 5-month hiatus in Space Shuttle launches. This slack period ended with the successful and highly publicized launch of the STS-95 mission. As the year closed, ISS assembly began with the successful orbiting and joining of the Functional Cargo Block (FGB), Zarya, from Russia and the Unity Node from the United States. Throughout the year, the Panel maintained its scrutiny of NASAs safety processes. Of particular interest were the potential effects on safety of workforce reductions and the continued transition of functions to the Space Flight Operations Contractor. Attention was also given to the risk management plans of the Aero-Space Technology programs, including the X-33, X-34, and X-38. Overall, the Panel concluded that safety is well served for the present. The picture is not as clear for the future. Cutbacks have limited the depth of talent available. In many cases, technical specialties are "one deep." The extended hiring freeze has resulted in an older workforce that will inevitably suffer significant departures from retirements in the near future. The resulting "brain drain" could represent a future safety risk unless appropriate succession planning is started expeditiously. This and other topics are covered in the section addressing workforce. In the case of the Space Shuttle, beneficial and mandatory safety and operational upgrades are being delayed because of a lack of sufficient present funding. Likewise, the ISS has little flexibility to begin long lead-time items for upgrades or contingency planning.

  10. Antinuclear antibody panel

    MedlinePlus

    ... ANA panel; ANA reflexive panel; SLE - ANA; Systemic lupus erythematosus - ANA ... have signs of an autoimmune disorder, particularly systemic lupus erythematosus . This test may be done if you ...

  11. 75 FR 76521 - Open Meeting of the Area 7 Taxpayer Advocacy Panel (Including the States of Alaska, California...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-08

    ... DEPARTMENT OF THE TREASURY Internal Revenue Service Open Meeting of the Area 7 Taxpayer Advocacy Panel (Including the States of Alaska, California, Hawaii, and Nevada) AGENCY: Internal Revenue Service (IRS) Treasury. [[Page 76522

  12. Standardization of Negative Controls in Diagnostic Immunohistochemistry: Recommendations From the International Ad Hoc Expert Panel

    PubMed Central

    Torlakovic, Emina E.; Francis, Glenn; Garratt, John; Gilks, Blake; Hyjek, Elizabeth; Ibrahim, Merdol; Miller, Rodney; Nielsen, Søren; Petcu, Eugen B.; Swanson, Paul E.; Taylor, Clive R.; Vyberg, Mogens

    2014-01-01

    Standardization of controls, both positive and negative controls, is needed for diagnostic immunohistochemistry (dIHC). The use of IHC-negative controls, irrespective of type, although well established, is not standardized. As such, the relevance and applicability of negative controls continues to challenge both pathologists and laboratory budgets. Despite the clear theoretical notion that appropriate controls serve to demonstrate the sensitivity and specificity of the dIHC test, it remains unclear which types of positive and negative controls are applicable and/or useful in day-to-day clinical practice. There is a perceived need to provide “best practice recommendations” for the use of negative controls. This perception is driven not only by logistics and cost issues, but also by increased pressure for accurate IHC testing, especially when IHC is performed for predictive markers, the number of which is rising as personalized medicine continues to develop. Herein, an international ad hoc expert panel reviews classification of negative controls relevant to clinical practice, proposes standard terminology for negative controls, considers the total evidence of IHC specificity that is available to pathologists, and develops a set of recommendations for the use of negative controls in dIHC based on “fit-for-use” principles. PMID:24714041

  13. Dual mode fuel injector with one piece needle valve member

    DOEpatents

    Lawrence, Keith E.; Hinrichsen, Michael H.; Buckman, Colby

    2005-01-18

    A fuel injector includes a homogenous charge nozzle outlet set and a conventional nozzle outlet set controlled respectively by inner and outer needle value members. The homogenous charged nozzle outlet set is defined by an outer needle value member that is moveably positioned in an injector body, which defines the conventional nozzle outlet set. The inner needle valve member is positioned in the outer needle valve member. The outer needle valve member is a piece component that includes at least one external guide surface, an external value surface and an internal valve seat.

  14. Installing a Carrier Panel on Endeavor in OPF 2

    NASA Image and Video Library

    2007-01-19

    In Orbiter Processing Facility bay 2, technicians Jesus Rodrigues (left) and James Johnson install a leading edge subsystem carrier panel on the right wing of Endeavour. The orbiter is scheduled for mission STS-118, targeted for launch on June 28. The mission will be the 22nd flight to the International Space Station, carrying another starboard array, S5, for installation.

  15. Installing a Carrier Panel on Endeavor in OPF 2

    NASA Image and Video Library

    2007-01-19

    In Orbiter Processing Facility bay 2, technicians James Johnson (left) and Jesus Rodrigues install a leading edge subsystem carrier panel on the right wing of Endeavour. The orbiter is scheduled for mission STS-118, targeted for launch on June 28. The mission will be the 22nd flight to the International Space Station, carrying another starboard array, S5, for installation.

  16. Production of Doctorates in the Biosciences, 1975-1980: An Experimental Forecast. Higher Education Panel Reports, No. 34.

    ERIC Educational Resources Information Center

    Atelsek, Frank J.; Gomberg, Irene L.

    A survey was undertaken in 1976 to obtain short-term estimates of doctorate production directly from the heads of the science departments involved. These biosciences departments were surveyed in the 235 member institutions of the Higher Education Panel that grant doctorates: anatomy, biochemistry, biology, biometry/biostatistics/biomathematics,…

  17. 75 FR 55405 - Open Meeting of the Taxpayer Advocacy Panel Small Business/Self Employed Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-09-10

    ... Small Business/Self Employed Project Committee AGENCY: Internal Revenue Service (IRS) Treasury. ACTION: Notice of meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Small Business/ Self Employed... suggestions on improving customer service at the Internal Revenue Service. DATES: The meeting will be held...

  18. 75 FR 33893 - Open Meeting of the Taxpayer Advocacy Panel Small Business/Self Employed Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-15

    ... Small Business/Self Employed Project Committee AGENCY: Internal Revenue Service (IRS) Treasury. ACTION: Notice of meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Small Business/ Self Employed... suggestions on improving customer service at the Internal Revenue Service. DATES: The meeting will be held...

  19. 75 FR 25317 - Open Meeting of the Taxpayer Advocacy Panel Small Business/Self Employed Issue Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-05-07

    ... Small Business/Self Employed Issue Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Small Business/ Self Employed... suggestions on improving customer service at the Internal Revenue Service. DATES: The meeting will be held...

  20. 75 FR 11999 - Open Meeting of the Taxpayer Advocacy Panel Small Business/Self Employed Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-12

    ... Small Business/Self Employed Project Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Small Business/ Self Employed... suggestions on improving customer service at the Internal Revenue Service. DATES: The meeting will be held...

  1. 75 FR 47348 - Open Meeting of the Taxpayer Advocacy Panel Small Business/Self Employed Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-05

    ... Small Business/Self Employed Project Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Small Business/ Self Employed... suggestions on improving customer service at the Internal Revenue Service. DATES: The meeting will be held...

  2. 75 FR 7539 - Open Meeting of the Taxpayer Advocacy Panel Small Business/Self Employed Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-02-19

    ... Small Business/Self Employed Project Committee AGENCY: Internal Revenue Service (IRS) Treasury. ACTION: Notice of meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Small Business/ Self Employed... suggestions on improving customer service at the Internal Revenue Service. DATES: The meeting will be held...

  3. 75 FR 62630 - Open Meeting of the Taxpayer Advocacy Panel Small Business/Self Employed Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-10-12

    ... Small Business/Self Employed Project Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Small Business/ Self Employed... suggestions on improving customer service at the Internal Revenue Service. DATES: The meeting will be held...

  4. 75 FR 18957 - Open Meeting of the Taxpayer Advocacy Panel Small Business/Self Employed Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-13

    ... Small Business/Self Employed Project Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Small Business/ Self Employed... suggestions on improving customer service at the Internal Revenue Service. DATES: The meeting will be held...

  5. 75 FR 39331 - Open Meeting of the Taxpayer Advocacy Panel Small Business/Self Employed Project Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-08

    ... Small Business/Self Employed Project Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Small Business/ Self Employed... suggestions on improving customer service at the Internal Revenue Service. DATES: The meeting will be held...

  6. A bacterial bioreporter panel to assay the cytotoxicity of atmospheric particulate matter

    NASA Astrophysics Data System (ADS)

    Kessler, Nivi; Schauer, James J.; Yagur-Kroll, Sharon; Melamed, Sahar; Tirosh, Ofir; Belkin, Shimshon; Erel, Yigal

    2012-12-01

    Numerous studies have demonstrated that elevated concentrations of suspended atmospheric particulate matter (PM) are associated with adverse health effects. In order to minimize the adverse public health effects of atmospheric PM by exposure management, there is a need for a greater understanding of the toxic mechanisms and the components that are responsible for the toxic effects. The aim of this study was to utilize bioassay techniques to investigate these aspects. For this purpose a reporter panel of 9 genetically engineered bacterial (Escherichia coli) strains was composed. Each panel member was designed to report on a different stress condition with a measurable light signal produced by the luciferase enzyme. Toxic mechanisms and components were studied using six anthropogenic PM source samples, including two vehicle combustion particles, three coal fly ash (CFA) samples and an urban dust sample. The most prominent outcome of the panel exposure results were broad panel responses observed for two of the CFA samples, indicating oxidative stress, respiration inhibition and iron deficiency. These responses were relieved when the samples were treated with EDTA, a non-specific metal chelator, suggesting the involvement of metals in the observed effects. Bioavailability analysis of the samples suggests that chromium was related to the toxic responses induced by two of the CFA samples. Oxidative stress was also observed in several samples of ambient atmospheric aerosols and excess metal toxicity in an urban dust sample collected in a parking lot. The reporter panel approach, as demonstrated in this study, has the potential of providing novel insights as to the mechanisms of atmospheric PM toxicity. Furthermore, combining the panel's results with bioavailability data can enlighten about the role of different PM components in the observed toxicity.

  7. Development of mental health first aid guidelines on how a member of the public can support a person affected by a traumatic event: a Delphi study

    PubMed Central

    2010-01-01

    Background People who experience traumatic events have an increased risk of developing a range of mental disorders. Appropriate early support from a member of the public, whether a friend, family member, co-worker or volunteer, may help to prevent the onset of a mental disorder or may minimise its severity. However, few people have the knowledge and skills required to assist. Simple guidelines may help members of the public to offer appropriate support when it is needed. Methods Guidelines were developed using the Delphi method to reach consensus in a panel of experts. Experts recruited to the panels included 37 professionals writing, planning or working clinically in the trauma area, and 17 consumer or carer advocates who had been affected by traumatic events. As input for the panels to consider, statements about how to assist someone who has experienced a traumatic event were sourced through a systematic search of both professional and lay literature. These statements were used to develop separate questionnaires about possible ways to assist adults and to assist children, and panel members answered either one questionnaire or both, depending on experience and expertise. The guidelines were written using the items most consistently endorsed by the panels across the three Delphi rounds. Results There were 180 items relating to helping adults, of which 65 were accepted, and 155 items relating to helping children, of which 71 were accepted. These statements were used to develop the two sets of guidelines appended to this paper. Conclusions There are a number of actions which may be useful for members of the public when they encounter someone who has experienced a traumatic event, and it is possible that these actions may help prevent the development of some mental health problems in the future. Positive social support, a strong theme in these guidelines, has some evidence for effectiveness in developing mental health problems in people who have experienced traumatic

  8. 76 FR 52735 - Members of Senior Executive Service Performance Review Boards

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-23

    ... DEPARTMENT OF THE TREASURY Internal Revenue Service Members of Senior Executive Service Performance Review Boards AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice. SUMMARY: The... 52736

  9. TRMM Solar Array Panels

    NASA Technical Reports Server (NTRS)

    1998-01-01

    This final report presents conclusions/recommendations concerning the TRMM Solar Array; deliverable list and schedule summary; waivers and deviations; as-shipped performance data, including flight panel verification matrix, panel output detail, shadow test summary, humidity test summary, reverse bias test panel; and finally, quality assurance summary.

  10. Optimization of Blended Wing Body Composite Panels Using Both NASTRAN and Genetic Algorithm

    NASA Technical Reports Server (NTRS)

    Lovejoy, Andrew E.

    2006-01-01

    The blended wing body (BWB) is a concept that has been investigated for improving the performance of transport aircraft. A trade study was conducted by evaluating four regions from a BWB design characterized by three fuselage bays and a 400,000 lb. gross take-off weight (GTW). This report describes the structural optimization of these regions via computational analysis and compares them to the baseline designs of the same construction. The identified regions were simplified for use in the optimization. The regions were represented by flat panels having appropriate classical boundary conditions and uniform force resultants along the panel edges. Panel-edge tractions and internal pressure values applied during the study were those determined by nonlinear NASTRAN analyses. Only one load case was considered in the optimization analysis for each panel region. Optimization was accomplished using both NASTRAN solution 200 and Genetic Algorithm (GA), with constraints imposed on stress, buckling, and minimum thicknesses. The NASTRAN optimization analyses often resulted in infeasible solutions due to violation of the constraints, whereas the GA enforced satisfaction of the constraints and, therefore, always ensured a feasible solution. However, both optimization methods encountered difficulties when the number of design variables was increased. In general, the optimized panels weighed less than the comparable baseline panels.

  11. Union Members Are Community Members

    ERIC Educational Resources Information Center

    Gray, David

    2013-01-01

    Unions serve their members' interests. But union members are also community members, and their interests go well beyond increasing pay and benefits. A local union president has found that his members are best served by participating in a community-wide coalition. Providing eyeglasses to needy students, promoting healthy eating, and increasing…

  12. Optimization of aircraft interior panels

    NASA Technical Reports Server (NTRS)

    Kourtides, Demetrius A.; Roper, Willard D.

    1986-01-01

    Eight different graphite composite panels were fabricated using four different resin matrices. The resin matrices included Hercules 71775, a blend of vinylpolystyrpyridine and bismaleimide, H795, a bismaleimide, Cycom 6162, a phenolic, and PSP 6022M, a polystyrylpyridine. Graphite panels were fabricated using fabric or unidirectional tape. This report describes the processes for preparing these panels and some of their mechanical, thermal and flammability properties. Panel properties are compared with state-of-the-art epoxy fiberglass composite panels.

  13. Composite panel development at JPL

    NASA Technical Reports Server (NTRS)

    Mcelroy, Paul; Helms, Rich

    1988-01-01

    Parametric computer studies can be use in a cost effective manner to determine optimized composite mirror panel designs. An InterDisciplinary computer Model (IDM) was created to aid in the development of high precision reflector panels for LDR. The materials properties, thermal responses, structural geometries, and radio/optical precision are synergistically analyzed for specific panel designs. Promising panels designs are fabricated and tested so that comparison with panel test results can be used to verify performance prediction models and accommodate design refinement. The iterative approach of computer design and model refinement with performance testing and materials optimization has shown good results for LDR panels.

  14. The Association of Team-Specific Workload and Staffing with Odds of Burnout Among VA Primary Care Team Members.

    PubMed

    Helfrich, Christian D; Simonetti, Joseph A; Clinton, Walter L; Wood, Gordon B; Taylor, Leslie; Schectman, Gordon; Stark, Richard; Rubenstein, Lisa V; Fihn, Stephan D; Nelson, Karin M

    2017-07-01

    Work-related burnout is common in primary care and is associated with worse patient safety, patient satisfaction, and employee mental health. Workload, staffing stability, and team completeness may be drivers of burnout. However, few studies have assessed these associations at the team level, and fewer still include members of the team beyond physicians. To study the associations of burnout among primary care providers (PCPs), nurse care managers, clinical associates (MAs, LPNs), and administrative clerks with the staffing and workload on their teams. We conducted an individual-level cross-sectional analysis of survey and administrative data in 2014. Primary care personnel at VA clinics responding to a national survey. Burnout was measured with a validated single-item survey measure dichotomized to indicate the presence of burnout. The independent variables were survey measures of team staffing (having a fully staffed team, serving on multiple teams, and turnover on the team), and workload both from survey items (working extended hours), and administrative data (patient panel overcapacity and average panel comorbidity). There were 4610 respondents (estimated response rate of 20.9%). The overall prevalence of burnout was 41%. In adjusted analyses, the strongest associations with burnout were having a fully staffed team (odds ratio [OR] = 0.55, 95% CI 0.47-0.65), having turnover on the team (OR = 1.67, 95% CI 1.43-1.94), and having patient panel overcapacity (OR = 1.19, 95% CI 1.01-1.40). The observed burnout prevalence was 30.1% lower (28.5% vs. 58.6%) for respondents working on fully staffed teams with no turnover and caring for a panel within capacity, relative to respondents in the inverse condition. Complete team staffing, turnover among team members, and panel overcapacity had strong, cumulative associations with burnout. Further research is needed to understand whether improvements in these factors would lower burnout.

  15. 75 FR 15714 - Voting and Nonvoting Consumer Representative Members on Public Advisory Committees and Panels...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-30

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2010-N-0001... Public Meeting AGENCY: Food and Drug Administration, HHS. ACTION: Notice of public meeting. The Food and... consumer interests on how to participate in the nomination and selection process for members representing...

  16. Attitude determination of planetary exploration rovers using solar panels characteristics and accelerometer

    NASA Astrophysics Data System (ADS)

    Ishida, Takayuki; Takahashi, Masaki

    2014-12-01

    In this study, we propose a new attitude determination system, which we call Irradiance-based Attitude Determination (IRAD). IRAD employs the characteristics and geometry of solar panels. First, the sun vector is estimated using data from solar panels including current, voltage, temperature, and the normal vectors of each solar panel. Because these values are obtained using internal sensors, it is easy for rovers to provide redundancy for IRAD. The normal vectors are used to apply to various shapes of rovers. Second, using the gravity vector obtained from an accelerometer, the attitude of a rover is estimated using a three-axis attitude determination method. The effectiveness of IRAD is verified through numerical simulations and experiments that show IRAD can estimate all the attitude angles (roll, pitch, and yaw) within a few degrees of accuracy, which is adequate for planetary explorations.

  17. 6. COMPRESSOR CONTROL PANELS: AT LEFT, 6,000 P.S.I. PANEL, CIRCA ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. COMPRESSOR CONTROL PANELS: AT LEFT, 6,000 P.S.I. PANEL, CIRCA 1957; AT RIGHT, FACING CAMERA, 10,000 P.S.I. PANEL. - Edwards Air Force Base, Air Force Rocket Propulsion Laboratory, Helium Compression Plant, Test Area 1-115, intersection of Altair & Saturn Boulevards, Boron, Kern County, CA

  18. Organizational member involvement in physical activity coalitions across the United States: development and testing of a novel survey instrument for assessing coalition functioning.

    PubMed

    Bornstein, Daniel B; Pate, Russell R; Beets, Michael W; Saunders, Ruth P; Blair, Steven N

    2015-06-01

    Coalitions are often composed of member organizations. Member involvement is thought to be associated with coalition success. No instrument currently exists for evaluating organizational member involvement in physical activity coalitions. This study aimed to develop a survey instrument for evaluating organizational member involvement in physical activity coalitions. The study was carried out in three phases: (a) developing a draft survey, (b) assessing the content validity of the draft survey, and (c) assessing the underlying factor structure, reliability, and validity of the survey. A cross-sectional design was employed. In Phase 1, a team of experts in survey development produced a draft survey. In Phase 2, the content validity of the draft survey was evaluated by a panel of individuals with expertise in physical activity coalitions. In Phase 3, the survey was administered to 120 individuals on local-, state-, and national-level physical activity coalitions. Responses were subjected to an exploratory factor analysis in order to determine the survey's underlying factor structure, reliability, and validity. Phases 1 and 2yielded a survey instrument with demonstrated content validity. Phase 3 yielded a three-factor model with three subscales: Strategic Alignment, Organizational Alignment, and Providing Input. Each subscale demonstrated high internal consistency reliability and construct validity. The survey instrument developed here demonstrated sound psychometric properties and provides new insight into organizational member involvement in physical activity coalitions. This instrument may be an important tool in developing a more complete picture of coalition functioning in physical activity coalitions specifically and health-based coalitions overall. © 2014 Society for Public Health Education.

  19. Development of Quiet Honeycomb Panels

    NASA Technical Reports Server (NTRS)

    Palumbo, Daniel L.; Klos, Jacob

    2009-01-01

    Sandwich honeycomb composite panels are lightweight and strong, and, therefore, provide a reasonable alternative to the aluminum ring framelstringer architecture currently used for most aircraft airframes. The drawback to honeycomb panels is that they radiate noise into the aircraft cabin very efficiently provoking the need for additional sound treatment which adds weight and reduces the material's cost advantage. A series of honeycomb panels were made which incorporated different design strategies aimed at reducing the honeycomb panels' radiation efficiency while at the same time maintaining its strength. The majority of the desi gns were centered around the concept of creatin g areas of reduced stiffness in the panel by adding voids and recesses to the core. The effort culminated with a reinforced./recessed panel which had 6 dB higher transmission loss than the baseline solid core panel while maintaining comparable strength.

  20. Supersonic Panel Flutter Test Results for Flat Fiber-Glass Sandwich Panels with Foamed Cores

    NASA Technical Reports Server (NTRS)

    Tuovila, W. J.; Presnell, John G., Jr.

    1961-01-01

    Flutter tests have been made on flat panels having a 1/4 inch-thick plastic-foam core covered with thin fiber-glass laminates. The testing was done in the Langley Unitary Plan wind tunnel at Mach numbers from 1.76 t o 2.87. The flutter boundary for these panels was found to be near the flutter boundary of thin metal panels when compared on the basis of an equivalent panel stiffness. The results also demonstrated that the depth of the cavity behind the panel has a pronounced influence on flutter. Changing the cavity depth from 1 1/2 inches to 1/2 inch reduced the dynamic pressure at start of flutter by 40 percent. No flutter was obtained when the spacers on the back of the panel were against the bottom of the cavity.

  1. Panel Resource Management (PRM) Implementation and Effects within Safety Review Panel Settings and Dynamics

    NASA Technical Reports Server (NTRS)

    Taylor, Robert W.; Nash, Sally K.

    2007-01-01

    While technical training and advanced degree's assure proficiency at specific tasks within engineering disciplines, they fail to address the potential for communication breakdown and decision making errors familiar to multicultural environments where language barriers, intimidating personalities and interdisciplinary misconceptions exist. In an effort to minimize these pitfalls to effective panel review, NASA's lead safety engineers to the ISS Safety Review Panel (SRP), and Payload Safety Review Panel (PSRP) initiated training with their engineers, in conjunction with the panel chairs, and began a Panel Resource Management (PRM) program. The intent of this program focuses on the ability to reduce the barriers inhibiting effective participation from all panel attendees by bolstering participants confidence levels through increased communication skills, situational awareness, debriefing, and a better technical understanding of requirements and systems.

  2. Solar panel cleaning robot

    NASA Astrophysics Data System (ADS)

    Nalladhimmu, Pavan Kumar Reddy; Priyadarshini, S.

    2018-04-01

    As the demand of electricity is increasing, there is need to using the renewable sources to produce the energy at present of power shortage, the use of solar energy could be beneficial to great extent and easy to get the maximum efficiency. There is an urgent in improving the efficiency of solar power generation. Current solar panels setups take a major power loss when unwanted obstructions cover the surface of the panels. To make solar energy more efficiency of solar array systems must be maximized efficiency evaluation of PV panels, that has been discussed with particular attention to the presence of dust on the efficiency of the PV panels have been highlighted. This paper gives the how the solar panel cleaning system works and designing of the cleaning system.

  3. Sound Transmission Loss Through a Corrugated-Core Sandwich Panel with Integrated Acoustic Resonators

    NASA Technical Reports Server (NTRS)

    Schiller, Noah H.; Allen, Albert R.; Zalewski, Bart F; Beck, Benjamin S.

    2014-01-01

    The goal of this study is to better understand the effect of structurally integrated resonators on the transmission loss of a sandwich panel. The sandwich panel has facesheets over a corrugated core, which creates long aligned chambers that run parallel to the facesheets. When ports are introduced through the facesheet, the long chambers within the core can be used as low-frequency acoustic resonators. By integrating the resonators within the structure they contribute to the static load bearing capability of the panel while also attenuating noise. An analytical model of a panel with embedded resonators is derived and compared with numerical simulations. Predictions show that acoustic resonators can significantly improve the transmission loss of the sandwich panel around the natural frequency of the resonators. In one configuration with 0.813 m long internal chambers, the diffuse field transmission loss is improved by more than 22 dB around 104 Hz. The benefit is achieved with no added mass or volume relative to the baseline structure. The embedded resonators are effective because they radiate sound out-of-phase with the structure. This results in destructive interference, which leads to less transmitted sound power.

  4. Defining the physician's duty to warn: consensus statement of Ontario's Medical Expert Panel on Duty to Inform

    PubMed Central

    Ferris, L E; Barkun, H; Carlisle, J; Hoffman, B; Katz, C; Silverman, M

    1998-01-01

    Ontario's Medical Expert Panel on Duty to Inform was formed to consider the duty of Ontario physicians in circumstances where a patient threatens to kill or cause serious bodily harm to a third party. The panel was concerned about the implications of any duty to inform on the integrity of the physician-patient relationship, particularly with respect to confidentiality. The panel agreed that regulations safeguarding the confidentiality of patient information ought to be changed only if there is a critical reason for doing so, but, after deliberation, the panel members concluded that the need to protect the public from serious risk of harm is a paramount concern that should supersede the duty of confidentiality. The recommendations reported here were endorsed in principle by the panelists and the groups they represented (the Royal College of Physicians and Surgeons of Canada, the Canadian Medical Protective Association, the College of Physicians and Surgeons of Ontario, the Ontario College of Family Physicians and the Ontario Medical Association) and are being implemented by the College of Physicians and Surgeons of Ontario. PMID:9629112

  5. Glass/Epoxy Door Panel for Automobiles

    NASA Technical Reports Server (NTRS)

    Bauer, J. L. JR.

    1985-01-01

    Lightweight panel cost-effective. Integrally-molded intrusion strap key feature of composite outer door panel. Strap replaces bulky and heavy steel instrusion beam of conventional door. Standard steel inner panel used for demonstration purposes. Door redesigned to exploit advantages of composite outer panel thinner. Outer panel for automobilie door, made of glass/epoxy composite material, lighter than conventional steel door panel, meets same strength requirements, and less expensive.

  6. Lightweight composites for modular panelized construction

    NASA Astrophysics Data System (ADS)

    Vaidya, Amol S.

    Rapid advances in construction materials technology have enabled civil engineers to achieve impressive gains in the safety, economy, and functionality of structures built to serve the common needs of society. Modular building systems is a fast-growing modern, form of construction gaining recognition for its increased efficiency and ability to apply modern technology to the needs of the market place. In the modular construction technique, a single structural panel can perform a number of functions such as providing thermal insulation, vibration damping, and structural strength. These multifunctional panels can be prefabricated in a manufacturing facility and then transferred to the construction site. A system that uses prefabricated panels for construction is called a "panelized construction system". This study focuses on the development of pre-cast, lightweight, multifunctional sandwich composite panels to be used for panelized construction. Two thermoplastic composite panels are proposed in this study, namely Composite Structural Insulated Panels (CSIPs) for exterior walls, floors and roofs, and Open Core Sandwich composite for multifunctional interior walls of a structure. Special manufacturing techniques are developed for manufacturing these panels. The structural behavior of these panels is analyzed based on various building design codes. Detailed descriptions of the design, cost analysis, manufacturing, finite element modeling and structural testing of these proposed panels are included in this study in the of form five peer-reviewed journal articles. The structural testing of the proposed panels involved in this study included flexural testing, axial compression testing, and low and high velocity impact testing. Based on the current study, the proposed CSIP wall and floor panels were found satisfactory, based on building design codes ASCE-7-05 and ACI-318-05. Joining techniques are proposed in this study for connecting the precast panels on the construction

  7. Recommendations for patient engagement in guideline development panels: A qualitative focus group study of guideline-naïve patients

    PubMed Central

    Mullins, C. Daniel; Gronseth, Gary S.; Gagliardi, Anna R.

    2017-01-01

    Background Patient and consumer engagement in clinical practice guideline development is internationally advocated, but limited research explores mechanisms for successful engagement. Objective To investigate the perspectives of potential patient/consumer guideline representatives on topics pertaining to engagement including guideline development group composition and barriers to and facilitators of engagement. Setting and participants Participants were guideline-naïve volunteers for programs designed to link community members to academic research with diverse ages, gender, race, and degrees of experience interacting with health care professionals. Methods Three focus groups and one key informant interview were conducted and analyzed using a qualitative descriptive approach. Results Participants recommended small, diverse guideline development groups engaging multiple patient/consumer stakeholders with no prior relationships with each other or professional panel members. No consensus was achieved on the ideal balance of patient/consumer and professional stakeholders. Pre-meeting reading/training and an identified contact person were described as keys to successful early engagement; skilled facilitators, understandable speech and language, and established mechanisms for soliciting patient opinions were suggested to enhance engagement at meetings. Conclusions Most suggestions for effective patient/consumer engagement in guidelines require forethought and planning but little additional expense, making these strategies easily accessible to guideline developers desiring to achieve more meaningful patient and consumer engagement. PMID:28319201

  8. Recommendations for patient engagement in guideline development panels: A qualitative focus group study of guideline-naïve patients.

    PubMed

    Armstrong, Melissa J; Mullins, C Daniel; Gronseth, Gary S; Gagliardi, Anna R

    2017-01-01

    Patient and consumer engagement in clinical practice guideline development is internationally advocated, but limited research explores mechanisms for successful engagement. To investigate the perspectives of potential patient/consumer guideline representatives on topics pertaining to engagement including guideline development group composition and barriers to and facilitators of engagement. Participants were guideline-naïve volunteers for programs designed to link community members to academic research with diverse ages, gender, race, and degrees of experience interacting with health care professionals. Three focus groups and one key informant interview were conducted and analyzed using a qualitative descriptive approach. Participants recommended small, diverse guideline development groups engaging multiple patient/consumer stakeholders with no prior relationships with each other or professional panel members. No consensus was achieved on the ideal balance of patient/consumer and professional stakeholders. Pre-meeting reading/training and an identified contact person were described as keys to successful early engagement; skilled facilitators, understandable speech and language, and established mechanisms for soliciting patient opinions were suggested to enhance engagement at meetings. Most suggestions for effective patient/consumer engagement in guidelines require forethought and planning but little additional expense, making these strategies easily accessible to guideline developers desiring to achieve more meaningful patient and consumer engagement.

  9. Thermal Performance of Orion Active Thermal Control System With Seven-Panel Reduced-Curvature Radiator

    NASA Technical Reports Server (NTRS)

    Wang, Xiao-Yen J.; Yuko, James R.

    2010-01-01

    The active thermal control system (ATCS) of the crew exploration vehicle (Orion) uses radiator panels with fluid loops as the primary system to reject heat from spacecraft. The Lockheed Martin (LM) baseline Orion ATCS uses eight-panel radiator coated with silver Teflon coating (STC) for International Space Station (ISS) missions, and uses seven-panel radiator coated with AZ 93 white paint for lunar missions. As an option to increase the radiator area with minimal impact on other component locations and interfaces, the reduced-curvature (RC) radiator concept was introduced and investigated here for the thermal perspective. Each RC radiator panel has 15 percent more area than each Lockheed Martin (LM) baseline radiator panel. The objective was to determine if the RC seven-panel radiator concept could be used in the ATCS for both ISS and lunar missions. Three radiator configurations the LM baseline, an RC seven-panel radiator with STC, and an RC seven-panel radiator with AZ 93 coating were considered in the ATCS for ISS missions. Two radiator configurations the LM baseline and an RC seven-panel radiator with AZ 93 coating were considered in the ATCS for lunar missions. A Simulink/MATLAB model of the ATCS was used to compute the ATCS performance. Some major hot phases on the thermal timeline were selected because of concern about the large amount of water sublimated for thermal topping. It was concluded that an ATCS with an RC seven-panel radiator could be used for both ISS and lunar missions, but with two different coatings STC for ISS missions and AZ 93 for lunar missions to provide performance similar to or better than that of the LM baseline ATCS.

  10. Aerospace Safety Advisory Panel

    NASA Technical Reports Server (NTRS)

    1993-01-01

    The Aerospace Safety Advisory Panel (ASAP) provided oversight on the safety aspects of many NASA programs. In addition, ASAP undertook three special studies. At the request of the Administrator, the panel assessed the requirements for an assured crew return vehicle (ACRV) for the space station and reviewed the organization of the safety and mission quality function within NASA. At the behest of Congress, the panel formed an independent, ad hoc working group to examine the safety and reliability of the space shuttle main engine. Section 2 presents findings and recommendations. Section 3 consists of information in support of these findings and recommendations. Appendices A, B, C, and D, respectively, cover the panel membership, the NASA response to the findings and recommendations in the March 1992 report, a chronology of the panel's activities during the reporting period, and the entire ACRV study report.

  11. KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility (OPF), a United Space Alliance technician examines the attachment points for the spars on the exterior of a wing of Space Shuttle Atlantis. Reinforced Carbon Carbon (RCC) panels are mechanically attached to the wing with a series of floating joints - spars - to reduce loading on the panels caused by wing deflections. The aluminum and the metallic attachments are protected from exceeding temperature limits by internal insulation. The next launch of Atlantis will be on mission STS-114, a utilization and logistics flight to the International Space Station.

    NASA Image and Video Library

    2003-09-03

    KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility (OPF), a United Space Alliance technician examines the attachment points for the spars on the exterior of a wing of Space Shuttle Atlantis. Reinforced Carbon Carbon (RCC) panels are mechanically attached to the wing with a series of floating joints - spars - to reduce loading on the panels caused by wing deflections. The aluminum and the metallic attachments are protected from exceeding temperature limits by internal insulation. The next launch of Atlantis will be on mission STS-114, a utilization and logistics flight to the International Space Station.

  12. KENNEDY SPACE CENTER, FLA. -In the Orbiter Processing Facility (OPF), a United Space Alliance technician examines the attachment points for the spars on the exterior of a wing of Space Shuttle Atlantis. Reinforced Carbon Carbon (RCC) panels are mechanically attached to the wing with a series of floating joints - spars - to reduce loading on the panels caused by wing deflections. The aluminum and the metallic attachments are protected from exceeding temperature limits by internal insulation. The next launch of Atlantis will be on mission STS-114, a utilization and logistics flight to the International Space Station.

    NASA Image and Video Library

    2003-09-03

    KENNEDY SPACE CENTER, FLA. -In the Orbiter Processing Facility (OPF), a United Space Alliance technician examines the attachment points for the spars on the exterior of a wing of Space Shuttle Atlantis. Reinforced Carbon Carbon (RCC) panels are mechanically attached to the wing with a series of floating joints - spars - to reduce loading on the panels caused by wing deflections. The aluminum and the metallic attachments are protected from exceeding temperature limits by internal insulation. The next launch of Atlantis will be on mission STS-114, a utilization and logistics flight to the International Space Station.

  13. 75 FR 34973 - New Mexico Collaborative Forest Restoration Program Technical Advisory Panel

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-21

    ... Collaborative Forest Restoration Program Technical Advisory Panel will meet in Albuquerque, New Mexico. The... meeting will be held at the Hyatt Place Albuquerque/ Uptown, 6901 Arvada Avenue, NE., Albuquerque, NM... International Forestry Staff, USDA Forest Service, 333 Broadway SE., Albuquerque, NM 87102. Comments may also be...

  14. Flexible optical panel

    DOEpatents

    Veligdan, James T.

    2001-01-01

    A flexible optical panel includes laminated optical waveguides, each including a ribbon core laminated between cladding, with the core being resilient in the plane of the core for elastically accommodating differential movement thereof to permit winding of the panel in a coil.

  15. Toward Earlier Inclusion of Pregnant and Postpartum Women in Tuberculosis Drug Trials: Consensus Statements From an International Expert Panel

    PubMed Central

    Gupta, Amita; Mathad, Jyoti S.; Abdel-Rahman, Susan M.; Albano, Jessica D.; Botgros, Radu; Brown, Vikki; Browning, Renee S.; Dawson, Liza; Dooley, Kelly E.; Gnanashanmugam, Devasena; Grinsztejn, Beatriz; Hernandez-Diaz, Sonia; Jean-Philippe, Patrick; Kim, Peter; Lyerly, Anne D.; Mirochnick, Mark; Mofenson, Lynne M.; Montepiedra, Grace; Piper, Jeanna; Sahin, Leyla; Savic, Radojka; Smith, Betsy; Spiegel, Hans; Swaminathan, Soumya; Watts, D. Heather; White, Amina

    2016-01-01

    Tuberculosis is a major cause of morbidity and mortality in women of childbearing age (15–44 years). Despite increased tuberculosis risk during pregnancy, optimal clinical treatment remains unclear: safety, tolerability, and pharmacokinetic data for many tuberculosis drugs are lacking, and trials of promising new tuberculosis drugs exclude pregnant women. To advance inclusion of pregnant and postpartum women in tuberculosis drug trials, the US National Institutes of Health convened an international expert panel. Discussions generated consensus statements (>75% agreement among panelists) identifying high-priority research areas during pregnancy, including: (1) preventing progression of latent tuberculosis infection, especially in women coinfected with human immunodeficiency virus; (2) evaluating new agents/regimens for treatment of multidrug-resistant tuberculosis; and (3) evaluating safety, tolerability and pharmacokinetics of tuberculosis drugs already in use during pregnancy and postpartum. Incorporating pregnant women into clinical trials would extend evidence-based tuberculosis prevention and treatment standards to this special population. PMID:26658057

  16. Make Your Own Solar Panel.

    ERIC Educational Resources Information Center

    Suzuki, David

    1992-01-01

    Presents an activity in which students make a simulated solar panel to learn about the principles behind energy production using solar panels. Provides information about how solar panels function to produce energy. (MCO)

  17. Effects of external and gap mean flows on sound transmission through a double-wall sandwich panel

    NASA Astrophysics Data System (ADS)

    Liu, Yu; Sebastian, Alexis

    2015-05-01

    This paper studies analytically the effects of an external mean flow and an internal gap mean flow on sound transmission through a double-wall sandwich panel lined with poroelastic materials. Biot's theory is employed to describe wave propagation in poroelastic materials, and the transfer matrix method with three types of boundary conditions is applied to solve the system simultaneously. The random incidence transmission loss in a diffuse field is calculated numerically, and the limiting angle of incidence due to total internal reflection is discussed in detail. The numerical predictions suggest that the sound insulation performance of such a double-wall panel is enhanced considerably by both external and gap mean flows particularly in the high-frequency range. Similar effects on transmission loss are observed for the two mean flows. It is shown that the effect of the gap mean flow depends on flow velocity, flow direction, gap depth and fluid properties and also that the fluid properties within the gap appear to influence the transmission loss more effectively than the gap flow. Despite the implementation difficulty in practice, an internal gap flow provides more design space for tuning the sound insulation performance of a double-wall sandwich panel and has great potential for active/passive noise control.

  18. Heat pipe thermal conditioning panel

    NASA Technical Reports Server (NTRS)

    Saaski, E. W.; Loose, J. D.; Mccoy, K. E.

    1974-01-01

    Thermal control of electronic hardware and experiments on future space vehicles is critical to proper functioning and long life. Thermal conditioning panels (cold plates) are a baseline control technique in current conceptual studies. Heat generating components mounted on the panels are typically cooled by fluid flowing through integral channels within the panel. However, replacing the pumped fluid coolant loop within the panel with heat pipes offers attractive advantages in weight, reliability, and installation. This report describes the development and fabrication of two large 0.76 x 0.76 m heat pipe thermal conditioning panels to verify performance and establish the design concept.

  19. Effects of press sizes on internal steam pressure during particleboard hot-pressing process

    Treesearch

    Zhiyong Cai; Michael Birkeland; James M. Wescott; Jane O' Dell; Jerrold E. Winandy

    2009-01-01

    Internal steam pressure produced during the hot-pressing cycle in particleboard production is critical to the newly developed bond strength that will determine the overall performance of particleboard. The difference between the accumulation of internal steam pressure for small panels made in the laboratory and that of large commercial-sized panels makes it difficult...

  20. Shame feeling in the Intensive Care Unit patient's family members.

    PubMed

    Koulouras, Vasilios; Konstanti, Zoe; Lepida, Dimitra; Papathanakos, Georgios; Gouva, Mary

    2017-08-01

    To investigate the levels of internal and external shame among family members of critically ill patients. This prospective study was conducted in 2012/2013 on family members of Intensive Care Unit patients using the Others As Shamer Scale and the Experiential Shame Scale questionnaires. Greek university hospital. Two hundred and twenty-three family members mean-aged (41.5±11.9) were studied, corresponding to 147 ICU patients. Out of these 223, 81 (36.3%) were men and 142 (63.7%) were women, while 79 (35.4%) lived with the patient. Family members who lived with the patient experienced higher internal and external shame compared to those who did not live with the patient (p=0.046 and p=0.028 respectively). Elementary and Junior High School graduates scored significantly higher than the other grades graduates in total Others As Shamer Scale, inferiority and emptiness scale (p<0.001). Intensive Care Unit patients' family members are prone to shame feelings, especially when being of low educational level. Health professionals have to take into consideration the possible implications for the patients and their care. Copyright © 2017 Elsevier Ltd. All rights reserved.