Exploration of the Factors That Support Learning: Web-Based Activity and Testing Systems in Community College Algebra [Conference Long Paper

ERIC Educational Resources Information Center

Hauk, Shandy; Matlen, Bryan J.

2017-01-01

This is an extended conference proceedings report [Long Paper] based on a shorter contributed report at the same conference. A variety of computerized learning platforms exist. In mathematics, most include sets of problems to complete. Feedback to users ranges from a single word like "Correct!" to offers of hints and partially- to…

iES - An Intelligent Electronic Sales Platform

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stanton, V L; Korbe III, W; Gao, J G

Current e-commerce systems support online shopping based on electronic product catalogs. The major issues associated with catalog-based commerce systems are: difficulty in distinguishing one retailer from another, complex navigation with confusing links, and a lack of personalized service. This paper reports an intelligent solution to address these issues. Our solution will provide a more personalized sales experience through the use of a transaction-based knowledge model that includes both the rules used for reasoning as well as the corresponding actions. Based on this solution, we have developed an intelligent electronic sales platform that is supported by a framework which provides themore » desired personalization as well as extensibility and customization capabilities. This paper reports our design and development of this system and application examples.« less

A bibliography on formal methods for system specification, design and validation

NASA Technical Reports Server (NTRS)

Meyer, J. F.; Furchtgott, D. G.; Movaghar, A.

1982-01-01

Literature on the specification, design, verification, testing, and evaluation of avionics systems was surveyed, providing 655 citations. Journal papers, conference papers, and technical reports are included. Manual and computer-based methods were employed. Keywords used in the online search are listed.

A Real-Time Knowledge Based Expert System For Diagnostic Problem Solving

NASA Astrophysics Data System (ADS)

Esteva, Juan C.; Reynolds, Robert G.

1986-03-01

This paper is a preliminary report of a real-time expert system which is concerned with the detection and diagnosis of electrical deviations in on-board vehicle-based electrical systems. The target systems are being tested at radio frequencies to evaluate their capability to be operated at designed levels of efficiency in an electromagnetic environment. The measurement of this capability is known as ElectroMagnetic Compatibility (EMC). The Intelligent Deviation Diagnosis (IDD) system consists of two basic modules the Automatic Data Acquisition Module (ADAM) and the Diagnosis System (DS). In this paper only the diagnosis system is described.

Mission of the Future. Proceedings of the Annual Convention of the Association for the Development of Computer-Based Instructional Systems. Volume I: General Session Papers and Project Reports (San Diego, California, February 27 to March 1, 1979).

ERIC Educational Resources Information Center

Association for the Development of Computer-based Instructional Systems.

The first of three volumes of papers presented at the 1979 ADCIS convention, this collection includes most of the 30 papers presented at the general session and 34 project reports. The general session opened with seven papers on various aspects of videodisc technology and five papers describing phases in the life of CBE sites. The remaining…

Design a Learning-Oriented Fall Event Reporting System Based on Kirkpatrick Model.

PubMed

Zhou, Sicheng; Kang, Hong; Gong, Yang

2017-01-01

Patient fall has been a severe problem in healthcare facilities around the world due to its prevalence and cost. Routine fall prevention training programs are not as effective as expected. Using event reporting systems is the trend for reducing patient safety events such as falls, although some limitations of the systems exist at current stage. We summarized these limitations through literature review, and developed an improved web-based fall event reporting system. The Kirkpatrick model, widely used in the business area for training program evaluation, has been integrated during the design of our system. Different from traditional event reporting systems that only collect and store the reports, our system automatically annotates and analyzes the reported events, and provides users with timely knowledge support specific to the reported event. The paper illustrates the design of our system and how its features are intended to reduce patient falls by learning from previous errors.

View-Based Searching Systems--Progress Towards Effective Disintermediation.

ERIC Educational Resources Information Center

Pollitt, A. Steven; Smith, Martin P.; Treglown, Mark; Braekevelt, Patrick

This paper presents the background and then reports progress made in the development of two view-based searching systems--HIBROWSE for EMBASE, searching Europe's most important biomedical bibliographic database, and HIBROWSE for EPOQUE, improving access to the European Parliament's Online Query System. The HIBROWSE approach to searching promises…

Color Reproduction System Based on Color Appearance Model and Gamut Mapping

DTIC Science & Technology

2000-07-01

and Gamut Mapping DISTRIBUTION: Approved for public release, distribution unlimited This paper is part of the following report: TITLE: Input/Output...report: ADP011333 thru ADP011362 UNCLASSIFIED Color reproduction system based on color appearance model and gamut mapping Fang-Hsuan Cheng, Chih-Yuan...perception is usually different. Basically, the influence factors are device calibration and characterization, viewing condition, device gamut and human

From the front line, report from a near paperless hospital: mixed reception among health care professionals.

PubMed

Lium, Jan-Tore; Laerum, Hallvard; Schulz, Tom; Faxvaag, Arild

2006-01-01

Many Norwegian hospitals that are equipped with an electronic medical record (EMR) system now have proceeded to withdraw the paper-based medical record from clinical workflow. In two previous survey-based studies on the effect of removing the paper-based medical record on the work of physicians, nurses and medical secretaries, we concluded that to scan and eliminate the paper based record was feasible, but that the medical secretaries were the group that reported to benefit the most from the change. To further explore the effects of removing the paper based record, especially in regard to medical personnel, we now have conducted a follow up study of a hospital that has scanned and eliminated its paper-based record. A survey of 27 physicians, 60 nurses and 30 medical secretaries was conducted. The results were compared with those from a previous study conducted three years earlier at the same department. The questionnaire (see online Appendix) covered the frequency of use of the EMR system for specific tasks by physicians, nurses and medical secretaries, the ease of performing these tasks compared to previous routines, user satisfaction and computer literacy. Both physicians and nurses displayed increased use of the EMR compared to the previous study, while medical secretaries reported generally unchanged but high use. The increase in use was not accompanied by a similar change in factors such as computer literacy or technical changes, suggesting that these typical success factors are necessary but not sufficient.

Automatic classification of radiological reports for clinical care.

PubMed

Gerevini, Alfonso Emilio; Lavelli, Alberto; Maffi, Alessandro; Maroldi, Roberto; Minard, Anne-Lyse; Serina, Ivan; Squassina, Guido

2018-06-07

Radiological reporting generates a large amount of free-text clinical narratives, a potentially valuable source of information for improving clinical care and supporting research. The use of automatic techniques to analyze such reports is necessary to make their content effectively available to radiologists in an aggregated form. In this paper we focus on the classification of chest computed tomography reports according to a classification schema proposed for this task by radiologists of the Italian hospital ASST Spedali Civili di Brescia. The proposed system is built exploiting a training data set containing reports annotated by radiologists. Each report is classified according to the schema developed by radiologists and textual evidences are marked in the report. The annotations are then used to train different machine learning based classifiers. We present in this paper a method based on a cascade of classifiers which make use of a set of syntactic and semantic features. The resulting system is a novel hierarchical classification system for the given task, that we have experimentally evaluated. Copyright © 2018 Elsevier B.V. All rights reserved.

Research on the Language of the English Classroom: A Disconnected Dream.

ERIC Educational Resources Information Center

Kluwin, Thomas N.

Methods used in studies of the classroom language of the English teacher are described in this paper and some results of the research are reported. The paper first describes three methods traditionally employed in the description of the language of the English classroom--live observation systems, coding systems based on transcripts, and…

Readings in Computer Based Guidance. The Bartlesville System.

ERIC Educational Resources Information Center

Bartlesville Public Schools, OK.

The document contains six papers which deal with the need for change in guidance and counseling due to the overwhelming amount of data which is insufficiently processed by conventional manual systems. Included in these papers are discussions on when these changes should occur and the nature of their alterations. The reports consider some of the…

The Development of a Web-Based Attendance System with RFID for Higher Education Institution in Binus University

NASA Astrophysics Data System (ADS)

Kurniali, S.; Mayliana

2014-03-01

This study focuses on the development of a web-based attendance system with RFID in a Indonesian higher education institution. The development of this system is motivated due to the fact that the students' attendance records are one of the important elements that reflect their academic achievements. However, the current manual practice implemented is causing such a hassle. Empowering the usage of the new RFID based student card, a new web based-attendance system has been built to cater the recording and reporting of not just the student's' attendances, but also the lecturer's and taught topics in the class. The development of this system is inspired by the senior management. And the system can be easily accessed through the learning management system and can generate a report in real time, This paper will discuss in details the development until the maintaining phase of the system. Result achieved is the innovation of developing the system proved reliable to support related business processes and empowered the intention to maximize the usage of the RFID card. Considered as a successful implementation, this paper will give an input for others who want to implement a similar system.

NASA scheduling technologies

NASA Technical Reports Server (NTRS)

Adair, Jerry R.

1994-01-01

This paper is a consolidated report on ten major planning and scheduling systems that have been developed by the National Aeronautics and Space Administration (NASA). A description of each system, its components, and how it could be potentially used in private industry is provided in this paper. The planning and scheduling technology represented by the systems ranges from activity based scheduling employing artificial intelligence (AI) techniques to constraint based, iterative repair scheduling. The space related application domains in which the systems have been deployed vary from Space Shuttle monitoring during launch countdown to long term Hubble Space Telescope (HST) scheduling. This paper also describes any correlation that may exist between the work done on different planning and scheduling systems. Finally, this paper documents the lessons learned from the work and research performed in planning and scheduling technology and describes the areas where future work will be conducted.

A Novel Physical Sensing Principle for Liquid Characterization Using Paper-Based Hygro-Mechanical Systems (PB-HMS).

PubMed

Perez-Cruz, Angel; Stiharu, Ion; Dominguez-Gonzalez, Aurelio

2017-07-20

In recent years paper-based microfluidic systems have emerged as versatile tools for developing sensors in different areas. In this work; we report a novel physical sensing principle for the characterization of liquids using a paper-based hygro-mechanical system (PB-HMS). The PB-HMS is formed by the interaction of liquid droplets and paper-based mini-structures such as cantilever beams. The proposed principle takes advantage of the hygroscopic properties of paper to produce hygro-mechanical motion. The dynamic response of the PB-HMS reveals information about the tested liquid that can be applied to characterize certain properties of liquids. A suggested method to characterize liquids by means of the proposed principle is introduced. The experimental results show the feasibility of such a method. It is expected that the proposed principle may be applied to sense properties of liquids in different applications where both disposability and portability are of extreme importance.

Downtime procedures for the 21st century: using a fully integrated health record for uninterrupted electronic reporting of laboratory results during laboratory information system downtimes.

PubMed

Oral, Bulent; Cullen, Regina M; Diaz, Danny L; Hod, Eldad A; Kratz, Alexander

2015-01-01

Downtimes of the laboratory information system (LIS) or its interface to the electronic medical record (EMR) disrupt the reporting of laboratory results. Traditionally, laboratories have relied on paper-based or phone-based reporting methods during these events. We developed a novel downtime procedure that combines advance placement of orders by clinicians for planned downtimes, the printing of laboratory results from instruments, and scanning of the instrument printouts into our EMR. The new procedure allows the analysis of samples from planned phlebotomies with no delays, even during LIS downtimes. It also enables the electronic reporting of all clinically urgent results during downtimes, including intensive care and emergency department samples, thereby largely avoiding paper- and phone-based communication of laboratory results. With the capabilities of EMRs and LISs rapidly evolving, information technology (IT) teams, laboratories, and clinicians need to collaborate closely, review their systems' capabilities, and design innovative ways to apply all available IT functions to optimize patient care during downtimes. Copyright© by the American Society for Clinical Pathology.

Assessment of data quality of and staff satisfaction with an electronic health record system in a developing country (Uganda): a qualitative and quantitative comparative study.

PubMed

Ndira, S P; Rosenberger, K D; Wetter, T

2008-01-01

To assess if electronic health record systems in developing countries can improve on timeliness, availability and accuracy of routine health reports and staff satisfaction after introducing the electronic system, compared to the paper-based alternative. The research was conducted with hospital staff of Tororo District Hospital in Uganda. A comparative intervention study with qualitative and quantitative methods was used to compare the paper-based (pre-test) to the electronic system (post-test) focusing on accuracy, availability and timeliness of monthly routine reports about mothers visiting the hospital; and staff satisfaction with the electronic system as outcome measures. Timeliness: pre-test 13 of 19 months delivered to the district timely, delivery dates for six months could not be established; post-test 100%. pre-test 79% of reports were present at the district health office; post-test 100%. Accuracy: pre-test 73.2% of selected reports could be independently confirmed as correct; post-test 71.2%. Difficulties were encountered in finding enough mothers through direct follow up to inquire on accuracy of information recorded about them. Staff interviews showed that the electronic system is appreciated by the majority of the hospital staff. Remaining obstacles include staff workload, power shortages, network breakdowns and parallel data entry (paper-based and electronic). While timeliness and availability improved, improvement of accuracy could not be established. Better approaches to ascertaining accuracy have to be devised, e.g. evaluation of intended use. For success, organizational, managerial and social challenges must be addressed beyond technical aspects.

PZT Active Frequency Based Wind Blade Fatigue to Failure Testing Results for Various Blade Designs

DTIC Science & Technology

2011-09-01

PZT Active Frequency Based Wind Blade Fatigue to Failure Testing Results for Various Blade Designs R. J. WERLINK...number. 1. REPORT DATE SEP 2011 2. REPORT TYPE N/A 3. DATES COVERED - 4. TITLE AND SUBTITLE PZT Active Frequency Based Wind Blade Fatigue ...18 Abstract: This paper summarizes NASA PZT Health Monitoring System results previously reported for 9 meter blade Fatigue loading to failure

Development of a vision-based pH reading system

NASA Astrophysics Data System (ADS)

Hur, Min Goo; Kong, Young Bae; Lee, Eun Je; Park, Jeong Hoon; Yang, Seung Dae; Moon, Ha Jung; Lee, Dong Hoon

2015-10-01

pH paper is generally used for pH interpretation in the QC (quality control) process of radiopharmaceuticals. pH paper is easy to handle and useful for small samples such as radio-isotopes and radioisotope (RI)-labeled compounds for positron emission tomography (PET). However, pHpaper-based detecting methods may have some errors due limitations of eye sight and inaccurate readings. In this paper, we report a new device for pH reading and related software. The proposed pH reading system is developed with a vision algorithm based on the RGB library. The pH reading system is divided into two parts. First is the reading device that consists of a light source, a CCD camera and a data acquisition (DAQ) board. To improve the accuracy of the sensitivity, we utilize the three primary colors of the LED (light emission diode) in the reading device. The use of three colors is better than the use of a single color for a white LED because of wavelength. The other is a graph user interface (GUI) program for a vision interface and report generation. The GUI program inserts the color codes of the pH paper into the database; then, the CCD camera captures the pH paper and compares its color with the RGB database image in the reading mode. The software captures and reports information on the samples, such as pH results, capture images, and library images, and saves them as excel files.

Performance and user acceptance of the Bhutan febrile and malaria information system: report from a pilot study.

PubMed

Tobgay, Tashi; Samdrup, Pema; Jamtsho, Thinley; Mannion, Kylie; Ortega, Leonard; Khamsiriwatchara, Amnat; Price, Ric N; Thriemer, Kamala; Kaewkungwal, Jaranit

2016-01-29

Over the last decade, Bhutan has made substantial progress in controlling malaria. The country is now in an elimination phase, aiming to achieve no locally transmitted malaria by 2018. However, challenges remain and innovative control strategies are needed to overcome these. The evaluation and user acceptance of a robust surveillance tool applicable for informing malaria elimination activities is reported here. The Bhutan Febrile and Malaria Information System (BFMIS) is a combination of web-based and mobile technology that captures malariometric surveillance data and generates real time reports. The system was rolled out at six sites and data uploaded regularly for analysis. Data completeness, accuracy and data turnaround time were accessed by comparison to traditional paper based surveillance records. User acceptance and willingness for further roll out was assessed using qualitative and quantitative data. Data completeness was nearly 10 % higher using the electronic system than the paper logs, and accuracy and validity of both approaches was comparable (up to 0.05 % in valid data and up to 3.06 % inaccurate data). Data turnaround time was faster using the BFMIS. General user satisfaction with the BFMIS was high, with high willingness of health facilities to adopt the system. Qualitative interviews revealed several areas for improvement before scale up. The BFMIS had numerous advantages over the paper-based system and based on the findings of the survey the Vector-Borne Disease Control Programme has taken the decision to incorporate the BMFIS and expand its use throughout all areas at risk for malaria as a key surveillance tool.

Use of and attitudes to a hospital information system by medical secretaries, nurses and physicians deprived of the paper-based medical record: a case report.

PubMed

Laerum, Hallvard; Karlsen, Tom H; Faxvaag, Arild

2004-10-16

Most hospitals keep and update their paper-based medical records after introducing an electronic medical record or a hospital information system (HIS). This case report describes a HIS in a hospital where the paper-based medical records are scanned and eliminated. To evaluate the HIS comprehensively, the perspectives of medical secretaries and nurses are described as well as that of physicians. We have used questionnaires and interviews to assess and compare frequency of use of the HIS for essential tasks, task performance and user satisfaction among medical secretaries, nurses and physicians. The medical secretaries use the HIS much more than the nurses and the physicians, and they consider that the electronic HIS greatly has simplified their work. The work of nurses and physicians has also become simplified, but they find less satisfaction with the system, particularly with the use of scanned document images. Although the basis for reference is limited, the results support the assertion that replacing the paper-based medical record primarily benefits the medical secretaries, and to a lesser degree the nurses and the physicians. The varying results in the different employee groups emphasize the need for a multidisciplinary approach when evaluating a HIS.

Use of and attitudes to a hospital information system by medical secretaries, nurses and physicians deprived of the paper-based medical record: a case report

PubMed Central

Lærum, Hallvard; Karlsen, Tom H; Faxvaag, Arild

2004-01-01

Background Most hospitals keep and update their paper-based medical records after introducing an electronic medical record or a hospital information system (HIS). This case report describes a HIS in a hospital where the paper-based medical records are scanned and eliminated. To evaluate the HIS comprehensively, the perspectives of medical secretaries and nurses are described as well as that of physicians. Methods We have used questionnaires and interviews to assess and compare frequency of use of the HIS for essential tasks, task performance and user satisfaction among medical secretaries, nurses and physicians. Results The medical secretaries use the HIS much more than the nurses and the physicians, and they consider that the electronic HIS greatly has simplified their work. The work of nurses and physicians has also become simplified, but they find less satisfaction with the system, particularly with the use of scanned document images. Conclusions Although the basis for reference is limited, the results support the assertion that replacing the paper-based medical record primarily benefits the medical secretaries, and to a lesser degree the nurses and the physicians. The varying results in the different employee groups emphasize the need for a multidisciplinary approach when evaluating a HIS. PMID:15488150

The usefulness of a mobile device-based system for patient-reported outcomes in a spine outpatient clinic.

PubMed

Kim, Chi Heon; Chung, Chun Kee; Choi, Yunhee; Shin, HyunJeong; Woo, Ji Won; Kim, Sung-Mi; Lee, Hyuk-Joon

2016-07-01

Patient-reported outcomes (PROs) are typically collected using a paper form, but this format is cumbersome to incorporate into outpatient clinic visits as well as in research. Therefore, we developed a mobile device-based system (mobile system) for spinal PRO. We hypothesized that this system may improve the quality of care in an outpatient clinic. This study aimed to analyze the patient-reported efficacy of a mobile system through a survey of patients' responses compared with a paper system. A prospective observational study was carried out. Surveys were conducted for 103 patients who had experience using both the paper and electronic systems in the outpatient clinic. Patient-reported positive response score (PRS) was the outcome measure. The survey included the characteristics of the patients (sex, age, use of smartphone, familiarity with smartphone applications, proficiency of typing with mobile device, site of pain, and education level) and eight questions in four domains: (1) efficacy in the waiting room, (2) efficacy during the clinic visit, (3) overall satisfaction, and (4) opinion about the use of this system. The response to each question was scored from 1 to 5 (1, negative; 5, positive response). The patient-reported PRS was calculated by adding the scores of the 8 questions and converting the total range to 0-100 (60, neutral). The mean PRS of the 8 questions was 79.8 (95% CI, 76.7-83.9). The mean PRS was 78.9 (75.6-82.2) at the waiting room and was 80.5 (77.1-83.9) during the clinic. The PRS for overall satisfaction and use of this system were 83.3 (79.6-87.0) and 77.1 (71.9-82.3), respectively. The use of smartphones and the proficiency of typing were independently significant predictors of PRS with an R(2) value of 0.325. The mobile device-based system improved the patient-reported efficacy in spine outpatient clinics. However, various factors such as the use of smartphones need to be considered when developing and applying mobile systems. Copyright © 2016 Elsevier Inc. All rights reserved.

Chugach School District: A Personalized, Performance-Based System. Insights from the Field. CompetencyWorks Report

ERIC Educational Resources Information Center

Sturgis, Chris

2016-01-01

This paper explores how an Alaskan school district shifted from a traditional K-12 education system to a personalized, performance-based system, embedded in the culture of the community, which led to increased student achievement. Chugach School District (CSD) first implemented competency education over twenty years ago, paving the way in…

SOCRATES, a Computer-Based Instructional System in Theory and Research. Technical Report.

ERIC Educational Resources Information Center

Stolurow, Lawrence M.

The paper describes a cybernetic computer-based instructional system, SOCRATES, the teaching model which led to its development, and some of the research accomplished with it. The acronym, SOCRATES, is System for Organizing Content to Review and Teach Educational Subject. It consists of a group of student input-output (I/O) stations wired to a…

GUIDON-WATCH: A Graphic Interface for Viewing a Knowledge-Based System. Technical Report #14.

ERIC Educational Resources Information Center

Richer, Mark H.; Clancey, William J.

This paper describes GUIDON-WATCH, a graphic interface that uses multiple windows and a mouse to allow a student to browse a knowledge base and view reasoning processes during diagnostic problem solving. The GUIDON project at Stanford University is investigating how knowledge-based systems can provide the basis for teaching programs, and this…

Textpresso site-specific recombinases: A text-mining server for the recombinase literature including Cre mice and conditional alleles.

PubMed

Urbanski, William M; Condie, Brian G

2009-12-01

Textpresso Site Specific Recombinases (http://ssrc.genetics.uga.edu/) is a text-mining web server for searching a database of more than 9,000 full-text publications. The papers and abstracts in this database represent a wide range of topics related to site-specific recombinase (SSR) research tools. Included in the database are most of the papers that report the characterization or use of mouse strains that express Cre recombinase as well as papers that describe or analyze mouse lines that carry conditional (floxed) alleles or SSR-activated transgenes/knockins. The database also includes reports describing SSR-based cloning methods such as the Gateway or the Creator systems, papers reporting the development or use of SSR-based tools in systems such as Drosophila, bacteria, parasites, stem cells, yeast, plants, zebrafish, and Xenopus as well as publications that describe the biochemistry, genetics, or molecular structure of the SSRs themselves. Textpresso Site Specific Recombinases is the only comprehensive text-mining resource available for the literature describing the biology and technical applications of SSRs. (c) 2009 Wiley-Liss, Inc.

The Social Life of a Data Base

NASA Technical Reports Server (NTRS)

Linde, Charlotte; Wales, Roxana; Clancy, Dan (Technical Monitor)

2002-01-01

This paper presents the complex social life of a large data base. The topics include: 1) Social Construction of Mechanisms of Memory; 2) Data Bases: The Invisible Memory Mechanism; 3) The Human in the Machine; 4) Data of the Study: A Large-Scale Problem Reporting Data Base; 5) The PRACA Study; 6) Description of PRACA; 7) PRACA and Paper; 8) Multiple Uses of PRACA; 9) The Work of PRACA; 10) Multiple Forms of Invisibility; 11) Such Systems are Everywhere; and 12) Two Morals to the Story. This paper is in viewgraph form.

Choosing Open Source ERP Systems: What Reasons Are There For Doing So?

NASA Astrophysics Data System (ADS)

Johansson, Björn; Sudzina, Frantisek

Enterprise resource planning (ERP) systems attract a high attention and open source software does it as well. The question is then if, and if so, when do open source ERP systems take off. The paper describes the status of open source ERP systems. Based on literature review of ERP system selection criteria based on Web of Science articles, it discusses reported reasons for choosing open source or proprietary ERP systems. Last but not least, the article presents some conclusions that could act as input for future research. The paper aims at building up a foundation for the basic question: What are the reasons for an organization to adopt open source ERP systems.

Validation study of an electronic method of condensed outcomes tools reporting in orthopaedics.

PubMed

Farr, Jack; Verma, Nikhil; Cole, Brian J

2013-12-01

Patient-reported outcomes (PRO) instruments are a vital source of data for evaluating the efficacy of medical treatments. Historically, outcomes instruments have been designed, validated, and implemented as paper-based questionnaires. The collection of paper-based outcomes information may result in patients becoming fatigued as they respond to redundant questions. This problem is exacerbated when multiple PRO measures are provided to a single patient. In addition, the management and analysis of data collected in paper format involves labor-intensive processes to score and render the data analyzable. Computer-based outcomes systems have the potential to mitigate these problems by reformatting multiple outcomes tools into a single, user-friendly tool.The study aimed to determine whether the electronic outcomes system presented produces results comparable with the test-retest correlations reported for the corresponding orthopedic paper-based outcomes instruments.The study is designed as a crossover study based on consecutive orthopaedic patients arriving at one of two designated orthopedic knee clinics.Patients were assigned to complete either a paper or a computer-administered questionnaire based on a similar set of questions (Knee injury and Osteoarthritis Outcome Score, International Knee Documentation Committee form, 36-Item Short Form survey, version 1, Lysholm Knee Scoring Scale). Each patient completed the same surveys using the other instrument, so that all patients had completed both paper and electronic versions. Correlations between the results from the two modes were studied and compared with test-retest data from the original validation studies.The original validation studies established test-retest reliability by computing correlation coefficients for two administrations of the paper instrument. Those correlation coefficients were all in the range of 0.7 to 0.9, which was deemed satisfactory. The present study computed correlation coefficients between the paper and electronic modes of administration. These correlation coefficients demonstrated similar results with an overall value of 0.86.On the basis of the correlation coefficients, the electronic application of commonly used knee outcome scores compare variably to the traditional paper variants with a high rate of test-retest correlation. This equivalence supports the use of the condensed electronic outcomes system and validates comparison of scores between electronic and paper modes. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

A perspective on paper-based microfluidics: Current status and future trends

PubMed Central

Li, Xu; Ballerini, David R.; Shen, Wei

2012-01-01

“Paper-based microfluidics” or “lab on paper,” as a burgeoning research field with its beginning in 2007, provides a novel system for fluid handling and fluid analysis for a variety of applications including health diagnostics, environmental monitoring as well as food quality testing. The reasons why paper becomes an attractive substrate for making microfluidic systems include: (1) it is a ubiquitous and extremely cheap cellulosic material; (2) it is compatible with many chemical/biochemical/medical applications; and (3) it transports liquids using capillary forces without the assistance of external forces. By building microfluidic channels on paper, liquid flow is confined within the channels, and therefore, liquid flow can be guided in a controlled manner. A variety of 2D and even 3D microfluidic channels have been created on paper, which are able to transport liquids in the predesigned pathways on paper. At the current stage of its development, paper-based microfluidic system is claimed to be low-cost, easy-to-use, disposable, and equipment-free, and therefore, is a rising technology particularly relevant to improving the healthcare and disease screening in the developing world, especially for those areas with no- or low-infrastructure and limited trained medical and health professionals. The research in paper-based microfluidics is experiencing a period of explosion; most published works have focused on: (1) inventing low-cost and simple fabrication techniques for paper-based microfluidic devices; and (2) exploring new applications of paper-based microfluidics by incorporating efficient detection methods. This paper aims to review both the fabrication techniques and applications of paper-based microfluidics reported to date. This paper also attempts to convey to the readers, from the authors’ point of view the current limitations of paper-based microfluidics which require further research, and a few perspective directions this new analytical system may take in its development. PMID:22662067

Spring-like electroactive actuators based on paper/ionogel/metal nanocomposites

NASA Astrophysics Data System (ADS)

Santaniello, Tommaso; Migliorini, Lorenzo; Borghi, Francesca; Yan, Yunsong; Rondinini, Sandra; Lenardi, Cristina; Milani, Paolo

2018-06-01

We report about a novel class of electroactive nanocomposites designed to perform spring-like actuation at low applied voltages. These systems are based on the impregnation of plain paper with a highly conductive ionogel, interpenetrating nanostructured conducting electrodes are printed on the paper/ionogel substrate by supersonic cluster beam deposition. Due to the structure and mechanical properties of the paper substrates, helix-shaped actuators can be obtained by coiling strips of the nanocomposites, thus enabling the production of electroactive components exhibiting motion up to two millimeters with a polarization of 5 V. Our approach constitutes a promising solution for the development of adaptive soft robotic architectures and smart flexible systems with bio-inspired motility.

A low cost instrumentation system to analyze different types of milk adulteration.

PubMed

Das, Siuli; Sivaramakrishna, Mulinti; Biswas, Karabi; Goswami, Bhaswati

2015-05-01

In this paper, the design of a complete instrumentation system to detect different types of milk adulteration has been reported. A simple to use indicator type readout device is reported which can be used by milk community people. A low cost microcontroller based automatic sensing system is also reported to detect 'synthetic milk', which has been reconstructed after adulterating the milk with 'liquid-whey'. Copyright © 2014 ISA. Published by Elsevier Ltd. All rights reserved.

The feasibility of paper-based Tracking Codes and electronic medical record systems to monitor tobacco-use assessment and intervention in an Individual Practice Association (IPA) Model health maintenance organization (HMO).

PubMed

Bentz, Charles J; Davis, Nancy; Bayley, Bruce

2002-01-01

Despite evidence of its effectiveness, tobacco cessation is not systematically addressed in routine healthcare settings. Its measurement is part of the problem. A pilot study was designed to develop and implement two different tobacco tracking systems in two independent primary care offices that participated in an IPA Model health maintenance organization in Portland, Oregon. The first clinic, which utilized a paper-based charting system, implemented CPT-like tracking codes to measure and report tobacco-cessation activities, which were eventually included in the managed-care organization's (MCO) claims database. The second clinic implemented an electronic tracking system based on its computerized electronic medical record (EMR) charting system. This paper describes the pilot study, including the processes involved in building provider acceptance for the new tracking systems in these two clinics, the barriers and successes encountered during implementation, and the resources expended by the clinics and by the MCO during the pilot. The findings from the 3-month implementation period were that documentation of tobacco-use status remained stable at 42-45% in the paper-based clinic and increased from 79% to 88% in the EMR clinic. This pilot study demonstrated that Tracking Codes are a feasible preventive-care tracking system in paper-based medical offices. However, high levels of effort and support are needed, and a critical mass of insurers and health plans would need to adopt Tracking Codes before widespread use could be expected. Results of the EMR-based tracking system are also reviewed and discussed.

Case Study: Converting Paper-based Case Report Forms to an Electronic Format (e-CRF) with ACASI Self-Report Integration.

PubMed

Mierzwa, Stan; Souidi, Samir; Akello, Carolyne; Etima, Juliane; Ssebagala, Richard; Nolan, Monica; Kabwigu, Samuel; Nakablito, Clemensia

2017-01-01

This paper will discuss the integration of electronic Case Report Forms (e-CRFs) into an already existing Android-based Audio Computer-Assisted Self-Interview (ACASI) software solution that was developed for a public health project in Kampala, Uganda, the technical outcome results, and lessons learned that may be useful to other projects requiring or considering such a technology solution. The developed product can function without a connection to the Internet and allows for synchronizing collected data once connectivity is possible. Previously, only paper-based CRFs were utilized at the Uganda project site. A subset or select group of CRFs were targeted for integration with ACASI in order to test feasibility and success. Survey volume, error rate, and acceptance of the system, as well as the operational and technical design of the solution, will be discussed.

An overview of the USL/DBMS NASA/PC R and D project working paper series

NASA Technical Reports Server (NTRS)

Dominick, Wayne D. (Editor)

1984-01-01

An introduction is given to the University of Southwestern Louisiana Data Base Management System (USL/DBMS) NASA/PC R and D Working Paper Series which has been established to provide a foundation for both a formal and informal information dissemination mechanism concerning PC-based research and development activities being performed pursuant to the NASA contract. This entry also serves as an index to the collection of Working Paper Series reports.

MICROPROCESSOR CONTROL OF ROTOGRAVURE AIRFLOWS

EPA Science Inventory

The report discusses the technical and economic viability of using micro-processor-based control technology to collect volatile organic compound (VOC) emissions from a paper coating operation. The microprocessor-based control system monitors and controls both the airflow rate and...

A LabVIEW-Based Virtual Instrument System for Laser-Induced Fluorescence Spectroscopy.

PubMed

Wu, Qijun; Wang, Lufei; Zu, Lily

2011-01-01

We report the design and operation of a Virtual Instrument (VI) system based on LabVIEW 2009 for laser-induced fluorescence experiments. This system achieves synchronous control of equipment and acquisition of real-time fluorescence data communicating with a single computer via GPIB, USB, RS232, and parallel ports. The reported VI system can also accomplish data display, saving, and analysis, and printing the results. The VI system performs sequences of operations automatically, and this system has been successfully applied to obtain the excitation and dispersion spectra of α-methylnaphthalene. The reported VI system opens up new possibilities for researchers and increases the efficiency and precision of experiments. The design and operation of the VI system are described in detail in this paper, and the advantages that this system can provide are highlighted.

A LabVIEW-Based Virtual Instrument System for Laser-Induced Fluorescence Spectroscopy

PubMed Central

Wu, Qijun; Wang, Lufei; Zu, Lily

2011-01-01

We report the design and operation of a Virtual Instrument (VI) system based on LabVIEW 2009 for laser-induced fluorescence experiments. This system achieves synchronous control of equipment and acquisition of real-time fluorescence data communicating with a single computer via GPIB, USB, RS232, and parallel ports. The reported VI system can also accomplish data display, saving, and analysis, and printing the results. The VI system performs sequences of operations automatically, and this system has been successfully applied to obtain the excitation and dispersion spectra of α-methylnaphthalene. The reported VI system opens up new possibilities for researchers and increases the efficiency and precision of experiments. The design and operation of the VI system are described in detail in this paper, and the advantages that this system can provide are highlighted. PMID:22013388

Education and Caste in India

ERIC Educational Resources Information Center

Chauhan, Chandra Pal Singh

2008-01-01

This paper analyses the policy of reservation for lower castes in India. This policy is similar to that of affirmative action in the United States. The paper provides a brief overview of the caste system and discusses the types of groups that are eligible for reservation, based on data from government reports. The stance of this paper is that…

Electronic Self-report Assessment--Cancer (ESRA-C): Working towards an integrated survey system.

PubMed

Karras, Bryant T; Wolpin, Seth; Lober, William B; Bush, Nigel; Fann, Jesse R; Berry, Donna L

2006-01-01

The Clinical Informatics Research Group and Biobehavioral Nursing and Health Systems at the University of Washington are working with interdisciplinary teams to improve patient care and tracking of patient-reported symptoms and outcomes by creating an extensible web-based survey and intervention platform. The findings and cumulative experience from these processes have led to incremental improvements and variations in each new implementation of the platform. This paper presents progress in the first year of a three-year NIH study entitled Electronic Self Report Assessment--Cancer (ESRA-C). The project's goals are to enhance and evaluate the web-based computerized patient self-reporting and assessment system at the Seattle Cancer Care Alliance. Preliminary work and lessons learned in the modification of the platform and enhancements to the system will be described.

First European Congress on Documentation Systems and Networks. Luxembourg, 16th, 17th and 18th May 1973.

ERIC Educational Resources Information Center

Commission des Communautes Europeennes (Luxembourg).

The conference proceedings contained in this document include invited papers, transcripts of discussions following those papers, and the reports of topical committees that met during the three day conference held in Luxembourg, May 1973. The focus of the conference was on the design and use of information retrieval and data base systems in various…

Implementation of an Open Source Library Management System: Experiences with Koha 3.0 at the Royal London Homoeopathic Hospital

ERIC Educational Resources Information Center

Bissels, Gerhard

2008-01-01

Purpose: The purpose of this paper is to describe the selection process and criteria that led to the implementation of the Koha 3.0 library management system (LMS) at the Complementary and Alternative Medicine Library and Information Service (CAMLIS), Royal London Homoeopathic Hospital. Design/methodology/approach: The paper is a report based on…

CMOS Active Pixel Sensor Star Tracker with Regional Electronic Shutter

NASA Technical Reports Server (NTRS)

Yadid-Pecht, Orly; Pain, Bedabrata; Staller, Craig; Clark, Christopher; Fossum, Eric

1996-01-01

The guidance system in a spacecraft determines spacecraft attitude by matching an observed star field to a star catalog....An APS(active pixel sensor)-based system can reduce mass and power consumption and radiation effects compared to a CCD(charge-coupled device)-based system...This paper reports an APS (active pixel sensor) with locally variable times, achieved through individual pixel reset (IPR).

Developing Distributed Collaboration Systems at NASA: A Report from the Field

NASA Technical Reports Server (NTRS)

Becerra-Fernandez, Irma; Stewart, Helen; Knight, Chris; Norvig, Peter (Technical Monitor)

2001-01-01

Web-based collaborative systems have assumed a pivotal role in the information systems development arena. While business to customers (B-to-C) and business to business (B-to-B) electronic commerce systems, search engines, and chat sites are the focus of attention, web-based systems span the gamut of information systems that were traditionally confined to internal organizational client server networks. For example, the Domino Application Server allows Lotus Notes (trademarked) uses to build collaborative intranet applications and mySAP.com (trademarked) enables web portals and e-commerce applications for SAP users. This paper presents the experiences in the development of one such system: Postdoc, a government off-the-shelf web-based collaborative environment. Issues related to the design of web-based collaborative information systems, including lessons learned from the development and deployment of the system as well as measured performance, are presented in this paper. Finally, the limitations of the implementation approach as well as future plans are presented as well.

Near field communications technology and the potential to reduce medication errors through multidisciplinary application

PubMed Central

Pegler, Joe; Lehane, Elaine; Livingstone, Vicki; McCarthy, Nora; Sahm, Laura J.; Tabirca, Sabin; O’Driscoll, Aoife; Corrigan, Mark

2016-01-01

Background Patient safety requires optimal management of medications. Electronic systems are encouraged to reduce medication errors. Near field communications (NFC) is an emerging technology that may be used to develop novel medication management systems. Methods An NFC-based system was designed to facilitate prescribing, administration and review of medications commonly used on surgical wards. Final year medical, nursing, and pharmacy students were recruited to test the electronic system in a cross-over observational setting on a simulated ward. Medication errors were compared against errors recorded using a paper-based system. Results A significant difference in the commission of medication errors was seen when NFC and paper-based medication systems were compared. Paper use resulted in a mean of 4.09 errors per prescribing round while NFC prescribing resulted in a mean of 0.22 errors per simulated prescribing round (P=0.000). Likewise, medication administration errors were reduced from a mean of 2.30 per drug round with a Paper system to a mean of 0.80 errors per round using NFC (P<0.015). A mean satisfaction score of 2.30 was reported by users, (rated on seven-point scale with 1 denoting total satisfaction with system use and 7 denoting total dissatisfaction). Conclusions An NFC based medication system may be used to effectively reduce medication errors in a simulated ward environment. PMID:28293602

Near field communications technology and the potential to reduce medication errors through multidisciplinary application.

PubMed

O'Connell, Emer; Pegler, Joe; Lehane, Elaine; Livingstone, Vicki; McCarthy, Nora; Sahm, Laura J; Tabirca, Sabin; O'Driscoll, Aoife; Corrigan, Mark

2016-01-01

Patient safety requires optimal management of medications. Electronic systems are encouraged to reduce medication errors. Near field communications (NFC) is an emerging technology that may be used to develop novel medication management systems. An NFC-based system was designed to facilitate prescribing, administration and review of medications commonly used on surgical wards. Final year medical, nursing, and pharmacy students were recruited to test the electronic system in a cross-over observational setting on a simulated ward. Medication errors were compared against errors recorded using a paper-based system. A significant difference in the commission of medication errors was seen when NFC and paper-based medication systems were compared. Paper use resulted in a mean of 4.09 errors per prescribing round while NFC prescribing resulted in a mean of 0.22 errors per simulated prescribing round (P=0.000). Likewise, medication administration errors were reduced from a mean of 2.30 per drug round with a Paper system to a mean of 0.80 errors per round using NFC (P<0.015). A mean satisfaction score of 2.30 was reported by users, (rated on seven-point scale with 1 denoting total satisfaction with system use and 7 denoting total dissatisfaction). An NFC based medication system may be used to effectively reduce medication errors in a simulated ward environment.

Impact of Environment-Based Teaching on Student Achievement: A Study of Washington State Middle Schools

ERIC Educational Resources Information Center

Bartosh, Oksana; Tudor, Margaret; Ferguson, Lynne; Taylor, Catherine

2009-01-01

This paper reports on a project which investigates the impact of systemic environmental education (EE) programs on student achievement on EE-based integrated tests and standardized tests in math, language arts, and listening. Systemic environmental education programs are defined by curriculum designed to align and integrate subjects around real…

Web-Based Essay Critiquing System and EFL Students' Writing: A Quantitative and Qualitative Investigation

ERIC Educational Resources Information Center

Lee, Cynthia; Wong, Kelvin C. K.; Cheung, William K.; Lee, Fion S. L.

2009-01-01

The paper first describes a web-based essay critiquing system developed by the authors using latent semantic analysis (LSA), an automatic text analysis technique, to provide students with immediate feedback on content and organisation for revision whenever there is an internet connection. It reports on its effectiveness in enhancing adult EFL…

Outcome-Based Education: Its Relevance to State and National Decision Making. Synthesis Report 9.

ERIC Educational Resources Information Center

Massanari, Carol B.

This paper on identifying education outcomes for students with disabilities proposes a framework for applying an outcome-based approach throughout the education system, by looking at the needs of the three major levels of the system (local, state, and national); defining different uses for the term "outcome" in order to achieve consensus…

The Telecommunications and Data Acquisition Report

NASA Technical Reports Server (NTRS)

Yuen, Joseph H. (Editor)

1993-01-01

This quarterly publication provides archival reports on developments in programs managed by JPL's Office of Telecommunications and Data Acquisition (TDA). In space communications, radio navigation, radio science, and ground-based radio and radar astronomy, it reports on activities of the Deep Space Network (DSN) in planning, supporting research and technology, implementation, and operations. Also included are standards activity at JPL for space data and information systems and reimbursable DSN work performed for other space agencies through NASA. The papers included in this document cover satellite tracking and ground-based navigation, spacecraft-ground communications, and optical communication systems for the Deep Space Network.

Developing an electronic system to manage and track emergency medications.

PubMed

Hamm, Mark W; Calabrese, Samuel V; Knoer, Scott J; Duty, Ashley M

2018-03-01

The development of a Web-based program to track and manage emergency medications with radio frequency identification (RFID) is described. At the Cleveland Clinic, medication kit restocking records and dispense locations were historically documented using a paper record-keeping system. The Cleveland Clinic investigated options to replace the paper-based tracking logs with a Web-based program that could track the real-time location and inventory of emergency medication kits. Vendor collaboration with a board of pharmacy (BOP) compliance inspector and pharmacy personnel resulted in the creation of a dual barcoding system using medication and pocket labels. The Web-based program was integrated with a Cleveland Clinic-developed asset tracking system using active RFID tags to give the real-time location of the medication kit. The Web-based program and the asset tracking system allowed identification of kits nearing expiration or containing recalled medications. Conversion from a paper-based system to a Web-based program began in October 2013. After 119 days, data were evaluated to assess the success of the conversion. Pharmacists spent an average of 27 minutes per day approving medication kits during the postimplementation period versus 102 minutes daily using the paper-based system, representing a 74% decrease in pharmacist time spent on this task. Prospective reports are generated monthly to allow the manager to assess the expected workload and adjust staffing for the next month. Implementation of a BOP-approved Web-based system for managing and tracking emergency medications with RFID integration decreased pharmacist review time, minimized compliance risk, and increased access to real-time data. Copyright © 2018 by the American Society of Health-System Pharmacists, Inc. All rights reserved.

Cedar Avenue driver assist system evaluation report.

DOT National Transportation Integrated Search

2011-12-01

This paper summarizes an evaluation of the Driver Assist System (DAS) used by the Minnesota Valley Transit Authority (MTVA) for bus shoulder operations. The DAS is a GPS-based technology suite that provides lane-position feedback to the driver via a ...

Automated Classification of Radiology Reports for Acute Lung Injury: Comparison of Keyword and Machine Learning Based Natural Language Processing Approaches.

PubMed

Solti, Imre; Cooke, Colin R; Xia, Fei; Wurfel, Mark M

2009-11-01

This paper compares the performance of keyword and machine learning-based chest x-ray report classification for Acute Lung Injury (ALI). ALI mortality is approximately 30 percent. High mortality is, in part, a consequence of delayed manual chest x-ray classification. An automated system could reduce the time to recognize ALI and lead to reductions in mortality. For our study, 96 and 857 chest x-ray reports in two corpora were labeled by domain experts for ALI. We developed a keyword and a Maximum Entropy-based classification system. Word unigram and character n-grams provided the features for the machine learning system. The Maximum Entropy algorithm with character 6-gram achieved the highest performance (Recall=0.91, Precision=0.90 and F-measure=0.91) on the 857-report corpus. This study has shown that for the classification of ALI chest x-ray reports, the machine learning approach is superior to the keyword based system and achieves comparable results to highest performing physician annotators.

Automated Classification of Radiology Reports for Acute Lung Injury: Comparison of Keyword and Machine Learning Based Natural Language Processing Approaches

PubMed Central

Solti, Imre; Cooke, Colin R.; Xia, Fei; Wurfel, Mark M.

2010-01-01

This paper compares the performance of keyword and machine learning-based chest x-ray report classification for Acute Lung Injury (ALI). ALI mortality is approximately 30 percent. High mortality is, in part, a consequence of delayed manual chest x-ray classification. An automated system could reduce the time to recognize ALI and lead to reductions in mortality. For our study, 96 and 857 chest x-ray reports in two corpora were labeled by domain experts for ALI. We developed a keyword and a Maximum Entropy-based classification system. Word unigram and character n-grams provided the features for the machine learning system. The Maximum Entropy algorithm with character 6-gram achieved the highest performance (Recall=0.91, Precision=0.90 and F-measure=0.91) on the 857-report corpus. This study has shown that for the classification of ALI chest x-ray reports, the machine learning approach is superior to the keyword based system and achieves comparable results to highest performing physician annotators. PMID:21152268

On Building an Ontological Knowledge Base for Managing Patient Safety Events.

PubMed

Liang, Chen; Gong, Yang

2015-01-01

Over the past decade, improving healthcare quality and safety through patient safety event reporting systems has drawn much attention. Unfortunately, such systems are suffering from low data quality, inefficient data entry and ineffective information retrieval. For improving the systems, we develop a semantic web ontology based on the WHO International Classification for Patient Safety (ICPS) and AHRQ Common Formats for patient safety event reporting. The ontology holds potential in enhancing knowledge management and information retrieval, as well as providing flexible data entry and case analysis for both reporters and reviewers of patient safety events. In this paper, we detailed our efforts in data acquisition, transformation, implementation and initial evaluation of the ontology.

Knowledge Management System Model for Learning Organisations

ERIC Educational Resources Information Center

Amin, Yousif; Monamad, Roshayu

2017-01-01

Based on the literature of knowledge management (KM), this paper reports on the progress of developing a new knowledge management system (KMS) model with components architecture that are distributed over the widely-recognised socio-technical system (STS) aspects to guide developers for selecting the most applicable components to support their KM…

The Nature of Feedback in English: Teacher Practices

ERIC Educational Resources Information Center

Dargusch, Joanne

2014-01-01

This paper reports on the findings of a study that investigated formative assessment practices of Senior English teachers in the standards-based Queensland assessment system. This paper focuses in particular on the teachers' provision of feedback on rough draft summative assessment items. It identifies the links between assessment criteria and…

A searching and reporting system for relational databases using a graph-based metadata representation.

PubMed

Hewitt, Robin; Gobbi, Alberto; Lee, Man-Ling

2005-01-01

Relational databases are the current standard for storing and retrieving data in the pharmaceutical and biotech industries. However, retrieving data from a relational database requires specialized knowledge of the database schema and of the SQL query language. At Anadys, we have developed an easy-to-use system for searching and reporting data in a relational database to support our drug discovery project teams. This system is fast and flexible and allows users to access all data without having to write SQL queries. This paper presents the hierarchical, graph-based metadata representation and SQL-construction methods that, together, are the basis of this system's capabilities.

No paper, but the same routines: a qualitative exploration of experiences in two Norwegian hospitals deprived of the paper based medical record.

PubMed

Lium, Jan-Tore; Tjora, Aksel; Faxvaag, Arild

2008-01-10

It has been shown that implementation of electronic medical records (EMR) and withdrawal of the paper-based medical record is feasible, but represents a drastic change in the information environment of hospital physicians. Previous investigations have revealed considerable inter-hospital variations in EMR system use and user satisfaction. The aim of this study was to further explore changes of clinicians' work after the EMR system implementation process and how they experienced working in a paper-deprived information environment. Qualitative study based on 18 semi-structured interviews with physicians in two Norwegian hospitals. Ten different but related characteristics of work within the EMR-based practice were identified; (1) there was closer clinical and administrative cooperation during the implementation processes; (2) there were greater benefits when everybody used the system; (3) systems supported freshmen better than experienced physicians; (4) the EMR was useful in regard to professional learning; (5) new users were given an introduction to the system by experienced; (6) younger clinicians reported different attitudes than senior clinicians, but this might be related to more than age and previous experience with computers; (7) the EMR made it easier to generate free-text notes, but this also created a potential for information overflow; (8) there is little or no support for mobile work; (9) instances of downtime are still experienced, and this influenced the attitude towards the system and (10) clinicians preferred EMR-only compared to combined paper and electronic systems. Despite the removal of paper-based records from clinical workflow (a change that hospital clinicians perceived as highly useful), many of the old routines remained unchanged, limiting the potential of the EMR system. Thus, there is a need to not only remove paper in the physical sense, but also to established routines to fully achieve the benefits of an EMR system.

No paper, but the same routines: a qualitative exploration of experiences in two Norwegian hospitals deprived of the paper based medical record

PubMed Central

Lium, Jan-Tore; Tjora, Aksel; Faxvaag, Arild

2008-01-01

Background It has been shown that implementation of electronic medical records (EMR) and withdrawal of the paper-based medical record is feasible, but represents a drastic change in the information environment of hospital physicians. Previous investigations have revealed considerable inter-hospital variations in EMR system use and user satisfaction. The aim of this study was to further explore changes of clinicians' work after the EMR system implementation process and how they experienced working in a paper-deprived information environment. Methods Qualitative study based on 18 semi-structured interviews with physicians in two Norwegian hospitals. Results Ten different but related characteristics of work within the EMR-based practice were identified; (1) there was closer clinical and administrative cooperation during the implementation processes; (2) there were greater benefits when everybody used the system; (3) systems supported freshmen better than experienced physicians; (4) the EMR was useful in regard to professional learning; (5) new users were given an introduction to the system by experienced; (6) younger clinicians reported different attitudes than senior clinicians, but this might be related to more than age and previous experience with computers; (7) the EMR made it easier to generate free-text notes, but this also created a potential for information overflow; (8) there is little or no support for mobile work; (9) instances of downtime are still experienced, and this influenced the attitude towards the system and (10) clinicians preferred EMR-only compared to combined paper and electronic systems. Conclusion Despite the removal of paper-based records from clinical workflow (a change that hospital clinicians perceived as highly useful), many of the old routines remained unchanged, limiting the potential of the EMR system. Thus, there is a need to not only remove paper in the physical sense, but also to established routines to fully achieve the benefits of an EMR system. PMID:18186935

An Assessment for Learning System Called ACED: Designing for Learning Effectiveness and Accessibility. Research Report. ETS RR-07-26

ERIC Educational Resources Information Center

Shute, Valerie J.; Hansen, Eric G.; Almond, Russell G.

2007-01-01

This paper reports on a 3-year, NSF-funded research and development project called ACED: Adaptive Content with Evidence-based Diagnosis. The purpose of the project was to design, develop, and evaluate an assessment for learning (AfL) system for diverse students, using Algebra I content related to geometric sequences (i.e., successive numbers…

Simultaneous real-time data collection methods

NASA Technical Reports Server (NTRS)

Klincsek, Thomas

1992-01-01

This paper describes the development of electronic test equipment which executes, supervises, and reports on various tests. This validation process uses computers to analyze test results and report conclusions. The test equipment consists of an electronics component and the data collection and reporting unit. The PC software, display screens, and real-time data-base are described. Pass-fail procedures and data replay are discussed. The OS2 operating system and Presentation Manager user interface system were used to create a highly interactive automated system. The system outputs are hardcopy printouts and MS DOS format files which may be used as input for other PC programs.

Identifying the decision to be supported: a review of papers from environmental modelling and software

USGS Publications Warehouse

Sojda, Richard S.; Chen, Serena H.; El Sawah, Sondoss; Guillaume, Joseph H.A.; Jakeman, A.J.; Lautenbach, Sven; McIntosh, Brian S.; Rizzoli, A.E.; Seppelt, Ralf; Struss, Peter; Voinov, Alexey; Volk, Martin

2012-01-01

Two of the basic tenets of decision support system efforts are to help identify and structure the decisions to be supported, and to then provide analysis in how those decisions might be best made. One example from wetland management would be that wildlife biologists must decide when to draw down water levels to optimise aquatic invertebrates as food for breeding ducks. Once such a decision is identified, a system or tool to help them make that decision in the face of current and projected climate conditions could be developed. We examined a random sample of 100 papers published from 2001-2011 in Environmental Modelling and Software that used the phrase “decision support system” or “decision support tool”, and which are characteristic of different sectors. In our review, 41% of the systems and tools related to the water resources sector, 34% were related to agriculture, and 22% to the conservation of fish, wildlife, and protected area management. Only 60% of the papers were deemed to be reporting on DSS. This was based on the papers reviewed not having directly identified a specific decision to be supported. We also report on the techniques that were used to identify the decisions, such as formal survey, focus group, expert opinion, or sole judgment of the author(s). The primary underlying modelling system, e.g., expert system, agent based model, Bayesian belief network, geographical information system (GIS), and the like was categorised next. Finally, since decision support typically should target some aspect of unstructured decisions, we subjectively determined to what degree this was the case. In only 23% of the papers reviewed, did the system appear to tackle unstructured decisions. This knowledge should be useful in helping workers in the field develop more effective systems and tools, especially by being exposed to the approaches in different, but related, disciplines. We propose that a standard blueprint for reporting on DSS be developed for consideration by journal editors to aid them in filtering papers that use the term, “decision support”.

Advanced Mirror System Demonstrator (AMSD) Risk Management

NASA Technical Reports Server (NTRS)

Byberg, Alicia; Russell, J. Kevin; Kaukler, Donna; Burdine, Robert V. (Technical Monitor)

2002-01-01

This paper will report risk issues associated with designing, manufacturing, and testing the Advanced Mirror System Demonstrator (AMSD). The Advanced Mirror System Demonstrator (AMSD) will be developed as a lightweight primary mirror system that can be produced at a low cost and with a short manufacturing schedule. This technology will add to the knowledge base for selection for the Next Generation Space Telescope (NGST), Space Based Laser (SBL), Research Laboratory mission (AFRL), and other government agency programs.

Discovering Recurring Anomalies in Text Reports Regarding Complex Space Systems

NASA Technical Reports Server (NTRS)

Zane-Ulman, Brett; Srivastava, Ashok N.

2005-01-01

Many existing complex space systems have a significant amount of historical maintenance and problem data bases that are stored in unstructured text forms. For some platforms, these reports may be encoded as scanned images rather than even searchable text. The problem that we address in this paper is the discovery of recurring anomalies and relationships between different problem reports that may indicate larger systemic problems. We will illustrate our techniques on data from discrepancy reports regarding software anomalies in the Space Shuttle. These free text reports are written by a number of different penp!e, thus the emphasis and wording varies considerably.

Multi-material classification of dry recyclables from municipal solid waste based on thermal imaging.

PubMed

Gundupalli, Sathish Paulraj; Hait, Subrata; Thakur, Atul

2017-12-01

There has been a significant rise in municipal solid waste (MSW) generation in the last few decades due to rapid urbanization and industrialization. Due to the lack of source segregation practice, a need for automated segregation of recyclables from MSW exists in the developing countries. This paper reports a thermal imaging based system for classifying useful recyclables from simulated MSW sample. Experimental results have demonstrated the possibility to use thermal imaging technique for classification and a robotic system for sorting of recyclables in a single process step. The reported classification system yields an accuracy in the range of 85-96% and is comparable with the existing single-material recyclable classification techniques. We believe that the reported thermal imaging based system can emerge as a viable and inexpensive large-scale classification-cum-sorting technology in recycling plants for processing MSW in developing countries. Copyright © 2017 Elsevier Ltd. All rights reserved.

Effects and Satisfaction of Medical Device Safety Information Reporting System Using Electronic Medical Record.

PubMed

Jang, Hye Jung; Choi, Young Deuk; Kim, Nam Hyun

2017-04-01

This paper describes an evaluation study on the effectiveness of developing an in-hospital medical device safety information reporting system for managing safety information, including adverse incident data related to medical devices, following the enactment of the Medical Device Act in Korea. Medical device safety information reports were analyzed for 190 cases that took place prior to the application of a medical device safety information reporting system and during a period when the reporting system was used. Also, questionnaires were used to measure the effectiveness of the medical device safety information reporting system. The analysis was based on the questionnaire responses of 15 reporters who submitted reports in both the pre- and post-reporting system periods. Sixty-two reports were submitted in paper form, but after the system was set up, this number more than doubled to 128 reports in electronic form. In terms of itemized reporting, a total of 45 items were reported. Before the system was used, 23 items had been reported, but this increased to 32 items after the system was put to use. All survey variables of satisfaction received a mean of over 3 points, while positive attitude , potential benefits , and positive benefits all exceeded 4 points, each receiving 4.20, 4.20, and 4.13, respectively. Among the variables, time-consuming and decision-making had the lowest mean values, each receiving 3.53. Satisfaction was found to be high for system quality and user satisfaction , but relatively low for time-consuming and decision-making . We were able to verify that effective reporting and monitoring of adverse incidents and the safety of medical devices can be implemented through the establishment of an in-hospital medical device safety information reporting system that can enhance patient safety and medical device risk management.

Performance of Case-Based Reasoning Retrieval Using Classification Based on Associations versus Jcolibri and FreeCBR: A Further Validation Study

NASA Astrophysics Data System (ADS)

Aljuboori, Ahmed S.; Coenen, Frans; Nsaif, Mohammed; Parsons, David J.

2018-05-01

Case-Based Reasoning (CBR) plays a major role in expert system research. However, a critical problem can be met when a CBR system retrieves incorrect cases. Class Association Rules (CARs) have been utilized to offer a potential solution in a previous work. The aim of this paper was to perform further validation of Case-Based Reasoning using a Classification based on Association Rules (CBRAR) to enhance the performance of Similarity Based Retrieval (SBR). The CBRAR strategy uses a classed frequent pattern tree algorithm (FP-CAR) in order to disambiguate wrongly retrieved cases in CBR. The research reported in this paper makes contributions to both fields of CBR and Association Rules Mining (ARM) in that full target cases can be extracted from the FP-CAR algorithm without invoking P-trees and union operations. The dataset used in this paper provided more efficient results when the SBR retrieves unrelated answers. The accuracy of the proposed CBRAR system outperforms the results obtained by existing CBR tools such as Jcolibri and FreeCBR.

Inconsistency in the Reporting of Adverse Events in Total Ankle Arthroplasty: A Systematic Review of the Literature.

PubMed

Mercer, Jeff; Penner, Murray; Wing, Kevin; Younger, Alastair S E

2016-02-01

Systems for classifying complications have been proposed for many surgical subspecialties. The goal of this systematic review was to analyze the number and frequency of different terms used to identify complications in total ankle arthroplasty. We hypothesized that this terminology would be highly variable, supporting a need for a standardized system of reporting. Studies that met predefined inclusion/exclusion criteria were analyzed to identify terminology used to describe adverse events. All terms were then tabulated and quantified with regard to diversity and frequency of use across all included studies. Terms were also grouped into 10 categories, and the number of reported occurrences of each adverse event was calculated. A reporting tool was then developed. Of 572 unique terms used to describe adverse outcomes in 117 studies, 55.9% (320/572) were used in only a single study. The category that was most frequently reported was revision surgery, with 86% of papers reporting on this event using 115 different terms. Other categories included "additional non-revision surgeries" (74% of papers, 93 terms), "loosening/osteolysis" (63% of papers, 86 terms), "fractures" (60% of papers, 53 terms), "wound problems" (52% of papers, 27 terms), "infection" (52% of papers, 27 terms), "implant problems" (50% of papers, 57 terms), "soft tissue injuries" (31% of papers, 30 terms), "heterotopic ossification" (22% of papers, 17 terms), and "pain" (18% of papers, 11 terms). The reporting of complications and adverse outcomes for total ankle arthroplasty was highly variable. This lack of consistency impedes the accurate reporting and interpretation of data required for the development of cohesive, evidence-based treatment guidelines for end-stage ankle arthritis. Standardized reporting tools are urgently needed. This study presents a prototype worksheet for the standardized assessment and reporting of adverse events. Level-III, decision analyses, systematic review of Level III studies and above. © The Author(s) 2015.

Designing a Classification System for Internet Offenders: Doing Cognitive Distortions

ERIC Educational Resources Information Center

Hundersmarck, Steven F.; Durkin, Keith F.; Delong, Ronald L.

2007-01-01

Televised features such as NBC's "To Catch a Predator" have highlighted the growing problem posed by Internet sexual predators. This paper reports on the authors' attempts in designing a classification system for Internet offenders. The classification system was designed based on existing theory, understanding the nature of Internet offenders and…

32 CFR 1290.9 - Forms and reports.

Code of Federal Regulations, 2014 CFR

2014-07-01

.... Magistrate system is based on use of a four-ply ticket designed to provide legal notice to violators and... departments. The DD Form 1805 is printed on chemically carbonized paper and prenumbered in series for... 635, Security/Criminal Incident Report, denoting the date, time, place, and type of violation, and the...

32 CFR 1290.9 - Forms and reports.

Code of Federal Regulations, 2013 CFR

2013-07-01

.... Magistrate system is based on use of a four-ply ticket designed to provide legal notice to violators and... departments. The DD Form 1805 is printed on chemically carbonized paper and prenumbered in series for... 635, Security/Criminal Incident Report, denoting the date, time, place, and type of violation, and the...

32 CFR 1290.9 - Forms and reports.

Code of Federal Regulations, 2012 CFR

2012-07-01

.... Magistrate system is based on use of a four-ply ticket designed to provide legal notice to violators and... departments. The DD Form 1805 is printed on chemically carbonized paper and prenumbered in series for... 635, Security/Criminal Incident Report, denoting the date, time, place, and type of violation, and the...

Development of a Work Control System for Propulsion Testing at NASA Stennis

NASA Technical Reports Server (NTRS)

Messer, Elizabeth A.

2005-01-01

In 1996 Stennis Space Center was given management authority for all Propulsion Testing for NASA. Over the next few years several research and development (R&D) test facilities were completed and brought up to full operation in what is known as the E-Complex Test Facility at Stennis Space Center. To construct, activate and operate these test facilities, a manual paper-based work control system was created. After utilizing this paper-based work control system for approximately three years, it became apparent that the research and development test area needed a better method to execute, monitor, and report on tasks required to further propulsion testing. The paper based system did not provide the engineers adequate visibility into work tasks or the tracking of testing or hardware discrepancies. This system also restricted the engineer s ability to utilize and access past knowledge and experiences given the severe schedule limitations for most R&D propulsion testing projects. Therefore a system was developed to meet the growing need of Test Operations called the Propulsion Test Directorate (PTD) Work Control System. This system is used to plan, perform, and track tasks that support testing and also to capture lessons learned while doing so.

A report on the USL NASA/RECON project. Part 2: PC-based R and D in support of IS and R applications

NASA Technical Reports Server (NTRS)

Dominick, Wayne D. (Editor); Chum, Frank Y.; Hall, Philip P.; Moreau, Dennis R.; Triantafyllopoulos, Spiros

1984-01-01

This Working Paper Series entry describes the PC R and D development effort initiated as part of the NASA/RECON Project at the University of Southwestern Louisiana. This effort involves the development of a PC-based environment for the prototyping and evaluation of various tools designed to enhance the interaction between scientists and engineers and remote information systems. The design of PC-based tools for the enhancement of the NASA/RECON university-level courses is described as well as the design of a multi-functional PC-based workstation to support access to and processing of information from local, distributed, and remote sources. Course preparation activities are described in a companion report entitled A Report on the USL NASA/RECON Project: Part 1, the Development of a Transportable, University-Level, IS and R Educational Program, by Suzy Gallagher and Martin Granier, USL/DBMS NASA/RECON Working Paper Series report number DBMS.NASA/RECON-7.

Response of data-driven artificial neural network-based TEC models to neutral wind for different locations, seasons, and solar activity levels from the Indian longitude sector

NASA Astrophysics Data System (ADS)

Sur, D.; Haldar, S.; Ray, S.; Paul, A.

2017-07-01

The perturbations imposed on transionospheric signals by the ionosphere are a major concern for navigation. The dynamic nature of the ionosphere in the low-latitude equatorial region and the Indian longitude sector has some specific characteristics such as sharp temporal and latitudinal variation of total electron content (TEC). TEC in the Indian longitude sector also undergoes seasonal variations. The large magnitude and sharp variation of TEC cause large and variable range errors for satellite-based navigation system such as Global Positioning System (GPS) throughout the day. For accurate navigation using satellite-based augmentation systems, proper prediction of TEC under certain geophysical conditions is necessary in the equatorial region. It has been reported in the literature that prediction accuracy of TEC has been improved using measured data-driven artificial neural network (ANN)-based vertical TEC (VTEC) models, compared to standard ionospheric models. A set of observations carried out in the Indian longitude sector have been reported in this paper in order to find the amount of improvement in performance accuracy of an ANN-based VTEC model after incorporation of neutral wind as model input. The variations of this improvement in prediction accuracy with respect to latitude, longitude, season, and solar activity have also been reported in this paper.

Comparison of PSF maxima and minima of multiple annuli coded aperture (MACA) and complementary multiple annuli coded aperture (CMACA) systems

NASA Astrophysics Data System (ADS)

Ratnam, Challa; Lakshmana Rao, Vadlamudi; Lachaa Goud, Sivagouni

2006-10-01

In the present paper, and a series of papers to follow, the Fourier analytical properties of multiple annuli coded aperture (MACA) and complementary multiple annuli coded aperture (CMACA) systems are investigated. First, the transmission function for MACA and CMACA is derived using Fourier methods and, based on the Fresnel-Kirchoff diffraction theory, the formulae for the point spread function are formulated. The PSF maxima and minima are calculated for both the MACA and CMACA systems. The dependence of these properties on the number of zones is studied and reported in this paper.

The digital pen and paper technology: implementation and use in an existing clinical information system.

PubMed

Despont-Gros, Christelle; Bœuf, Christophe; Geissbuhler, Antoine; Lovis, Christian

2005-01-01

Evaluation of the technical feasibility of tight integration of the digital pen and paper technology in an existing computerized patient record.Technology: The digital pen is a normal pen able to record all actions of the user and to analyze a micro pattern printed on the paper. The digital paper is a normal paper printed with an almost invisible micro pattern of small dots encoding information such as position and identifiers. We report our experience in the implementation and the use of this technology in an existing large clinical information system for acquiring clinical information. It is possible to print uniquely identified forms using the digital paper technology. These forms can be pre-filled with clinical readable information about the patient. When care providers complete these forms using the digital pen, it is possible to acquire the data in a structured computerized patient record. The technology is easy to integrate in a component-based architecture based on Web Services. The digital pen and paper is a cost-effective technology that can be integrated in an existing clinical information system and allows fast and easy bedside clinical information acquisition without the need for an expensive infrastructure based on traditional portable devices or wireless devices.

Selected papers in the applied computer sciences 1992

USGS Publications Warehouse

Wiltshire, Denise A.

1992-01-01

This compilation of short papers reports on technical advances in the applied computer sciences. The papers describe computer applications in support of earth science investigations and research. This is the third volume in the series "Selected Papers in the Applied Computer Sciences." Listed below are the topics addressed in the compilation:Integration of geographic information systems and expert systems for resource management,Visualization of topography using digital image processing,Development of a ground-water data base for the southeastern Uited States using a geographic information system,Integration and aggregation of stream-drainage data using a geographic information system,Procedures used in production of digital geologic coverage using compact disc read-only memory (CD-ROM) technology, andAutomated methods for producing a technical publication on estimated water use in the United States.

Realization of time keeping alarming system based on CTI technique

NASA Astrophysics Data System (ADS)

Cai, Cheng-Lin; Dong, Shao-Wu

2003-12-01

An application of CTI (Computer Telephone Integration) technique to fault alarming in time keeping system is presented in this paper. Two key parts of this alarming system, telephone phonic card and TTS (Text To Speech) are briefly introduced. A series of events and methods for programming interface based on ActiveX control (phonic.OCX) is discussed, and an alarming program module is developed. The alarming program module can be used in reporting accidents for time keeping system, and can also be applied to power supply system and environmental monitoring system.

Development of Incident Report Database for Organizational Learning

NASA Astrophysics Data System (ADS)

Otsuka, Yuichi; Abe, Tomotaka; Noguchi, Hiroshi; Makinouchi, Akifumi

The necessity of an incident reporting system has recently been increasing for hospitals. Japan Council for Quality Health Care (JCQHC) started operating a national incident reporting system to which domestic hospitals would report their incidents. However, the reporting system obtained an additional problem for the hospitals. They managed their own systems which collected reports by papers. The purposes of the reporting systems was to analyze considerable causes involved in incidents to improve the quality of patient safety management. On the contrary, the national reporting system aimed at collecting a statistical tendency of normal incidents. Simultaneously operating the two systems would be too much workload for safety managers. The load may have the managers rest only a short time for summarizing occurrences, not enough for analyzing their causes. However, to the authors' knowledge, there has not been an integrating policy of the two forms to adapt them to practical situations in patient safety management. The scope of this paper is to establish the integrated form in order to use in analyzing the causes of incidents as well as reporting for the national system. We have developed new data base system using XML + XSLT and Java Servlet. The developed system is composed of three computers; DB server , DB client and Data sending server. To investigate usability of the developed system, we conducted a monitoring test by real workers in reporting workplaces. The result of subjective evaluations by examinees was so preferable for the developed system. The results of usability test and the achievement of increasing the number of reports after the introduction can demonstrate the enough effectiveness of the developed system for supporting the activity of patient safety management.

User Centered System Design: Papers for the CHI � Conference on Human Factors in Computer Systems.

DTIC Science & Technology

1983-11-01

purpose of the United States Government. ONR REPORT830383 2e0 104 Unclagsified ’tCCU*ITY CLASSIFICATION OF THIS PAGE (Whom, Des enteredE) REPORT... con - mand languages versus menu-based systems, choices of names, and handheld computers versus work stations are examined briefly. UN.ATkrr SErXjftTyv...lsted above in alphabetical order their intentions during the session. An extract from one of We wish to thank Don Norman. Bob Glushko, and Jnathan

Undergraduate Students' Mental Operations in Systems of Differential Equations

ERIC Educational Resources Information Center

Whitehead, Karen; Rasmussen, Chris

2003-01-01

This paper reports on research conducted to understand undergraduate students' ways of reasoning about systems of differential equations (SDEs). As part of a semester long classroom teaching experiment in a first course in differential equations, we conducted task-based interviews with six students after their study of first order differential…

CAA: Computer Assisted Athletics.

ERIC Educational Resources Information Center

Hall, John H.

Computers have been used in a variety of applications for athletics since the late 1950's. These have ranged from computer-controlled electric scoreboards to computer-designed pole vaulting poles. Described in this paper are a computer-based athletic injury reporting system and a computer-assisted football scouting system. The injury reporting…

Engineering: A Look Inward and a Reach Outward.

ERIC Educational Resources Information Center

Reisman, Arnold, Ed.

Reported are speeches presented at a Summer Engineering Symposium which deals with the general theme "Man in Contemporary Society." A historical perspective of engineering leading to its future role in society was established. From this base other papers applied engineering concepts to socioeconomic systems, educational systems, simulation in…

[Design of a miniaturized blood temperature-varying system based on computer distributed control].

PubMed

Xu, Qiang; Zhou, Zhaoying; Peng, Jiegang; Zhu, Junhua

2007-10-01

Blood temperature-varying has been widely applied in clinical practice such as extracorporeal circulation for whole-body perfusion hyperthermia (WBPH), body rewarming and blood temperature-varying in organ transplantation. This paper reports a novel DCS (Computer distributed control)-based blood temperature-varying system which includes therapy management function and whose hardware and software can be extended easily. Simulation results illustrate that this system provides precise temperature control with good performance in various operation conditions.

Creating and indexing teaching files from free-text patient reports.

PubMed Central

Johnson, D. B.; Chu, W. W.; Dionisio, J. D.; Taira, R. K.; Kangarloo, H.

1999-01-01

Teaching files based on real patient data can enhance the education of students, staff and other colleagues. Although information retrieval system can index free-text documents using keywords, these systems do not work well where content bearing terms (e.g., anatomy descriptions) frequently appears. This paper describes a system that uses multi-word indexing terms to provide access to free-text patient reports. The utilization of multi-word indexing allows better modeling of the content of medical reports, thus improving retrieval performance. The method used to select indexing terms as well as early evaluation of retrieval performance is discussed. PMID:10566473

Application of automation and robotics to lunar surface human exploration operations

NASA Technical Reports Server (NTRS)

Woodcock, Gordon R.; Sherwood, Brent; Buddington, Patricia A.; Bares, Leona C.; Folsom, Rolfe; Mah, Robert; Lousma, Jack

1990-01-01

Major results of a study applying automation and robotics to lunar surface base buildup and operations concepts are reported. The study developed a reference base scenario with specific goals, equipment concepts, robot concepts, activity schedules and buildup manifests. It examined crew roles, contingency cases and system reliability, and proposed a set of technologies appropriate and necessary for effective lunar operations. This paper refers readers to four companion papers for quantitative details where appropriate.

Design And Implementation Of Integrated Vision-Based Robotic Workcells

NASA Astrophysics Data System (ADS)

Chen, Michael J.

1985-01-01

Reports have been sparse on large-scale, intelligent integration of complete robotic systems for automating the microelectronics industry. This paper describes the application of state-of-the-art computer-vision technology for manufacturing of miniaturized electronic components. The concepts of FMS - Flexible Manufacturing Systems, work cells, and work stations and their control hierarchy are illustrated in this paper. Several computer-controlled work cells used in the production of thin-film magnetic heads are described. These cells use vision for in-process control of head-fixture alignment and real-time inspection of production parameters. The vision sensor and other optoelectronic sensors, coupled with transport mechanisms such as steppers, x-y-z tables, and robots, have created complete sensorimotor systems. These systems greatly increase the manufacturing throughput as well as the quality of the final product. This paper uses these automated work cells as examples to exemplify the underlying design philosophy and principles in the fabrication of vision-based robotic systems.

Mechanism-based Pharmacovigilance over the Life Sciences Linked Open Data Cloud.

PubMed

Kamdar, Maulik R; Musen, Mark A

2017-01-01

Adverse drug reactions (ADR) result in significant morbidity and mortality in patients, and a substantial proportion of these ADRs are caused by drug-drug interactions (DDIs). Pharmacovigilance methods are used to detect unanticipated DDIs and ADRs by mining Spontaneous Reporting Systems, such as the US FDA Adverse Event Reporting System (FAERS). However, these methods do not provide mechanistic explanations for the discovered drug-ADR associations in a systematic manner. In this paper, we present a systems pharmacology-based approach to perform mechanism-based pharmacovigilance. We integrate data and knowledge from four different sources using Semantic Web Technologies and Linked Data principles to generate a systems network. We present a network-based Apriori algorithm for association mining in FAERS reports. We evaluate our method against existing pharmacovigilance methods for three different validation sets. Our method has AUROC statistics of 0.7-0.8, similar to current methods, and event-specific thresholds generate AUROC statistics greater than 0.75 for certain ADRs. Finally, we discuss the benefits of using Semantic Web technologies to attain the objectives for mechanism-based pharmacovigilance.

Implementation of learning outcome attainment measurement system in aviation engineering higher education

NASA Astrophysics Data System (ADS)

Salleh, I. Mohd; Mat Rani, M.

2017-12-01

This paper aims to discuss the effectiveness of the Learning Outcome Attainment Measurement System in assisting Outcome Based Education (OBE) for Aviation Engineering Higher Education in Malaysia. Direct assessments are discussed to show the implementation processes that become a key role in the successful outcome measurement system. A case study presented in this paper involves investigation on the implementation of the system in Aircraft Structure course for Bachelor in Aircraft Engineering Technology program in UniKL-MIAT. The data has been collected for five semesters, starting from July 2014 until July 2016. The study instruments used include the report generated in Learning Outcomes Measurements System (LOAMS) that contains information on the course learning outcomes (CLO) individual and course average performance reports. The report derived from LOAMS is analyzed and the data analysis has revealed that there is a positive significant correlation between the individual performance and the average performance reports. The results for analysis of variance has further revealed that there is a significant difference in OBE grade score among the report. Independent samples F-test results, on the other hand, indicate that the variances of the two populations are unequal.

Computer Assisted Instructional Design for Computer-Based Instruction. Final Report. Working Papers.

ERIC Educational Resources Information Center

Russell, Daniel M.; Pirolli, Peter

Recent advances in artificial intelligence and the cognitive sciences have made it possible to develop successful intelligent computer-aided instructional systems for technical and scientific training. In addition, computer-aided design (CAD) environments that support the rapid development of such computer-based instruction have also been recently…

Bacteria-powered battery on paper.

PubMed

Fraiwan, Arwa; Choi, Seokheun

2014-12-21

Paper-based devices have recently emerged as simple and low-cost paradigms for fluid manipulation and analytical/clinical testing. However, there are significant challenges in developing paper-based devices at the system level, which contain integrated paper-based power sources. Here, we report a microfabricated paper-based bacteria-powered battery that is capable of generating power from microbial metabolism. The battery on paper showed a very short start-up time relative to conventional microbial fuel cells (MFCs); paper substrates eliminated the time traditional MFCs required to accumulate and acclimate bacteria on the anode. Only four batteries connected in series provided desired values of current and potential to power an LED for more than 30 minutes. The battery featured (i) a low-cost paper-based proton exchange membrane directly patterned on commercially available parchment paper and (ii) paper reservoirs for holding the anolyte and the catholyte for an extended period of time. Based on this concept, we also demonstrate the use of paper-based test platforms for the rapid characterization of electricity-generating bacteria. This paper-based microbial screening tool does not require external pumps/tubings and represents the most rapid test platform (<50 min) compared with the time needed by using traditional screening tools (up to 103 days) and even recently proposed MEMS arrays (< 2 days).

A novel shape-based coding-decoding technique for an industrial visual inspection system.

PubMed

Mukherjee, Anirban; Chaudhuri, Subhasis; Dutta, Pranab K; Sen, Siddhartha; Patra, Amit

2004-01-01

This paper describes a unique single camera-based dimension storage method for image-based measurement. The system has been designed and implemented in one of the integrated steel plants of India. The purpose of the system is to encode the frontal cross-sectional area of an ingot. The encoded data will be stored in a database to facilitate the future manufacturing diagnostic process. The compression efficiency and reconstruction error of the lossy encoding technique have been reported and found to be quite encouraging.

Dealing with Change in Hong Kong Schools Using Strategic Thinking Skills

ERIC Educational Resources Information Center

Pang, Nicholas Sun-Keung; Pisapia, John

2012-01-01

This paper reports an investigation into the strategic thinking skills of school leaders in Hong Kong. By adapting the Strategic Thinking Questionnaire in the school context and based on data self-reported from 543 Hong Kong school leaders, three cognitive capabilities with strategic thinking were identified: reflection, systems thinking and…

Smart Desktops for Teachers. ECS Issue Paper: Technology.

ERIC Educational Resources Information Center

Palaich, Robert M.; Good, Dixie Griffin; Stout, Connie; Vickery, Emily

This report presents the results of a study of how emerging technologies can help educators deliver standards-based education to K-12 students. The first section of the report provides background on the new technology offerings and defines smart desktop systems. The second section lists critical questions for decisionmakers related to general…

Very High-Temperature Reactor (VHTR) Proliferation Resistance and Physical Protection (PR&PP)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moses, David Lewis

2011-10-01

This report documents the detailed background information that has been compiled to support the preparation of a much shorter white paper on the design features and fuel cycles of Very High-Temperature Reactors (VHTRs), including the proposed Next-Generation Nuclear Plant (NGNP), to identify the important proliferation resistance and physical protection (PR&PP) aspects of the proposed concepts. The shorter white paper derived from the information in this report was prepared for the Department of Energy Office of Nuclear Science and Technology for the Generation IV International Forum (GIF) VHTR Systems Steering Committee (SSC) as input to the GIF Proliferation Resistance and Physicalmore » Protection Working Group (PR&PPWG) (http://www.gen-4.org/Technology/horizontal/proliferation.htm). The short white paper was edited by the GIF VHTR SCC to address their concerns and thus may differ from the information presented in this supporting report. The GIF PR&PPWG will use the derived white paper based on this report along with other white papers on the six alternative Generation IV design concepts (http://www.gen-4.org/Technology/systems/index.htm) to employ an evaluation methodology that can be applied and will evolve from the earliest stages of design. This methodology will guide system designers, program policy makers, and external stakeholders in evaluating the response of each system, to determine each system's resistance to proliferation threats and robustness against sabotage and terrorism threats, and thereby guide future international cooperation on ensuring safeguards in the deployment of the Generation IV systems. The format and content of this report is that specified in a template prepared by the GIF PR&PPWG. Other than the level of detail, the key exception to the specified template format is the addition of Appendix C to document the history and status of coated-particle fuel reprocessing technologies, which fuel reprocessing technologies have yet to be deployed commercially and have only been demonstrated in testing at a laboratory scale.« less

Development of a Flexible Computerized Management Infrastructure for a Commercial Nuclear Power Plant

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ali, Syed Firasat; Hajek, Brian K.; Usman, Shoaib

The report emphasizes smooth transition from paper-based procedure systems (PBPSs) to computer-based procedure systems (CBPSs) for the existing commercial nuclear power plants in the U.S. The expected advantages and of the transition are mentioned including continued, safe and efficient operation of the plants under their recently acquired or desired extended licenses. The report proposes a three-stage survey to aid in developing a national strategic plan for the transition from PBPSs to CBPSs. It also includes a comprehensive questionnaire that can be readily used for the first stage of the suggested survey.

CBP for Field Workers – Results and Insights from Three Usability and Interface Design Evaluations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Oxstrand, Johanna Helene; Le Blanc, Katya Lee; Bly, Aaron Douglas

2015-09-01

Nearly all activities that involve human interaction with the systems in a nuclear power plant are guided by procedures. Even though the paper-based procedures (PBPs) currently used by industry have a demonstrated history of ensuring safety, improving procedure use could yield significant savings in increased efficiency as well as improved nuclear safety through human performance gains. The nuclear industry is constantly trying to find ways to decrease the human error rate, especially the human errors associated with procedure use. As a step toward the goal of improving procedure use and adherence, researchers in the Light-Water Reactor Sustainability (LWRS) Program, togethermore » with the nuclear industry, have been investigating the possibility and feasibility of replacing the current paper-based procedure process with a computer-based procedure (CBP) system. This report describes a field evaluation of new design concepts of a prototype computer-based procedure system.« less

MEMS piezoresistive cantilever for the direct measurement of cardiomyocyte contractile force

NASA Astrophysics Data System (ADS)

Matsudaira, Kenei; Nguyen, Thanh-Vinh; Hirayama Shoji, Kayoko; Tsukagoshi, Takuya; Takahata, Tomoyuki; Shimoyama, Isao

2017-10-01

This paper reports on a method to directly measure the contractile forces of cardiomyocytes using MEMS (micro electro mechanical systems)-based force sensors. The fabricated sensor chip consists of piezoresistive cantilevers that can measure contractile forces with high frequency (several tens of kHz) and high sensing resolution (less than 0.1 nN). Moreover, the proposed method does not require a complex observation system or image processing, which are necessary in conventional optical-based methods. This paper describes the design, fabrication, and evaluation of the proposed device and demonstrates the direct measurements of contractile forces of cardiomyocytes using the fabricated device.

Detection of telomerase on upconversion nanoparticle modified cellulose paper.

PubMed

Wang, Faming; Li, Wen; Wang, Jiasi; Ren, Jinsong; Qu, Xiaogang

2015-07-25

Herein we report a convenient and sensitive method for the detection of telomerase activity based on upconversion nanoparticle (UCNP) modified cellulose paper. Compared with many solution-phase systems, this paper chip is more stable and easily stores the test results. What's more, the low background fluorescence of the UCNPs increases the sensitivity of this method, and the low telomerase levels in different cell lines can clearly be discriminated by the naked eye.

Discovery: Faculty Publications and Presentations, Fiscal Year 1980. Volume 1. Books, Texts, Manuals, Chapters, Papers, Reports, and Presentations

DTIC Science & Technology

1980-09-01

organizationally dysfunctional behavior. Of course, the latter includes racism , sexism , and brutality. c. "Transcultural Health Care." Menlo Park...area rule. The paper discusses the theory as it pertains to the simplication wind tunnel experiments used to verify the theory , a program developed...34Computerized Test Generation System" (Research) The purpose of the system is to allow a course director to build a data base of questions. statistics

A Model-based Approach to Reactive Self-Configuring Systems

NASA Technical Reports Server (NTRS)

Williams, Brian C.; Nayak, P. Pandurang

1996-01-01

This paper describes Livingstone, an implemented kernel for a self-reconfiguring autonomous system, that is reactive and uses component-based declarative models. The paper presents a formal characterization of the representation formalism used in Livingstone, and reports on our experience with the implementation in a variety of domains. Livingstone's representation formalism achieves broad coverage of hybrid software/hardware systems by coupling the concurrent transition system models underlying concurrent reactive languages with the discrete qualitative representations developed in model-based reasoning. We achieve a reactive system that performs significant deductions in the sense/response loop by drawing on our past experience at building fast prepositional conflict-based algorithms for model-based diagnosis, and by framing a model-based configuration manager as a prepositional, conflict-based feedback controller that generates focused, optimal responses. Livingstone automates all these tasks using a single model and a single core deductive engine, thus making significant progress towards achieving a central goal of model-based reasoning. Livingstone, together with the HSTS planning and scheduling engine and the RAPS executive, has been selected as the core autonomy architecture for Deep Space One, the first spacecraft for NASA's New Millennium program.

Real-time monitoring of school absenteeism to enhance disease surveillance: a pilot study of a mobile electronic reporting system.

PubMed

Lawpoolsri, Saranath; Khamsiriwatchara, Amnat; Liulark, Wongwat; Taweeseneepitch, Komchaluch; Sangvichean, Aumnuyphan; Thongprarong, Wiraporn; Kaewkungwal, Jaranit; Singhasivanon, Pratap

2014-05-12

School absenteeism is a common source of data used in syndromic surveillance, which can eventually be used for early outbreak detection. However, the absenteeism reporting system in most schools, especially in developing countries, relies on a paper-based method that limits its use for disease surveillance or outbreak detection. The objective of this study was to develop an electronic real-time reporting system on school absenteeism for syndromic surveillance. An electronic (Web-based) school absenteeism reporting system was developed to embed it within the normal routine process of absenteeism reporting. This electronic system allowed teachers to update students' attendance status via mobile tablets. The data from all classes and schools were then automatically sent to a centralized database for further analysis and presentation, and for monitoring temporal and spatial patterns of absent students. In addition, the system also had a disease investigation module, which provided a link between absenteeism data from schools and local health centers, to investigate causes of fever among sick students. The electronic school absenteeism reporting system was implemented in 7 primary schools in Bangkok, Thailand, with total participation of approximately 5000 students. During May-October 2012 (first semester), the percentage of absentees varied between 1% and 10%. The peak of school absenteeism (sick leave) was observed between July and September 2012, which coincided with the peak of dengue cases in children aged 6-12 years being reported to the disease surveillance system. The timeliness of a reporting system is a critical function in any surveillance system. Web-based application and mobile technology can potentially enhance the use of school absenteeism data for syndromic surveillance and outbreak detection. This study presents the factors that determine the implementation success of this reporting system.

Implementing a Quality Management Framework in a Higher Education Organisation: A Case Study

ERIC Educational Resources Information Center

O'Mahony, Kim; Garavan, Thomas N.

2012-01-01

Purpose: This paper aims to report and analyse the lessons learned from a case study on the implementation of a quality management system within an IT Division in a higher education (HE) organisation. Design/methodology/approach: The paper is based on a review of the relevant literatures and the use of primary sources such as document analysis,…

Creating a Next-Generation System of K-12 English Learner Language Proficiency Assessments. Research Report. ETS RR-16-06

ERIC Educational Resources Information Center

Hauck, Maurice Cogan; Wolf, Mikyung Kim; Mislevy, Robert

2016-01-01

This paper is the first in a series from Educational Testing Service (ETS) concerning English language proficiency (ELP) assessments for K-12 English learners (ELs). The goal of this paper, and the series, is to present research-based ideas, principles, and recommendations for consideration by those who are conceptualizing, developing, and…

Reformulating Testing to Measure Thinking and Learning. Technical Report No. 6898.

ERIC Educational Resources Information Center

Collins, Allan

This paper discusses systemic problems with testing and outlines two scenarios for reformulating testing based on intelligent tutoring systems. Five desiderata are provided to underpin the type of testing proposed: (1) tests should emphasize learning and thinking; (2) tests should require generation as well as selection; (3) tests should be…

The Accountability Dimension in Quality Assurance: An International Comparison

ERIC Educational Resources Information Center

Stensaker, Bjorn; Harvey, Lee

2013-01-01

The paper reports from a comparative study on systems of quality assurance in 19 countries around the globe, and how these systems function as accountability mechanisms. Based on a theoretical framework for assessing how accountability mechanisms can contribute to build trust in the higher education sector, the analysis of the quality assurance…

A New Nightly Build System for LHCb

NASA Astrophysics Data System (ADS)

Clemencic, M.; Couturier, B.

2014-06-01

The nightly build system used so far by LHCb has been implemented as an extension of the system developed by CERN PH/SFT group (as presented at CHEP2010). Although this version has been working for many years, it has several limitations in terms of extensibility, management and ease of use, so that it was decided to develop a new version based on a continuous integration system. In this paper we describe a new implementation of the LHCb Nightly Build System based on the open source continuous integration system Jenkins and report on the experience of configuring a complex build workflow in Jenkins.

Electronic medical record in cardiology: a 10-year Italian experience.

PubMed

Carpeggiani, Clara; Macerata, Alberto; Morales, Maria Aurora

2015-08-01

the aim of this study was to report a ten years experience in the electronic medical record (EMR) use. An estimated 80% of healthcare transactions are still paper-based. an EMR system was built at the end of 1998 in an Italian tertiary care center to achieve total integration among different human and instrumental sources, eliminating paper-based medical records. Physicians and nurses who used EMR system reported their opinions. In particular the hospital activity supported electronically, regarding 4,911 adult patients hospitalized in the 2004- 2008 period, was examined. the final EMR product integrated multimedia document (text, images, signals). EMR presented for the most part advantages and was well adopted by the personnel. Appropriateness evaluation was also possible for some procedures. Some disadvantages were encountered, such as start-up costs, long time required to learn how to use the tool, little to no standardization between systems and the EMR technology. the EMR is a strategic goal for clinical system integration to allow a better health care quality. The advantages of the EMR overcome the disadvantages, yielding a positive return on investment to health care organization.

Enhanced terahertz imaging system performance analysis and design tool for concealed weapon identification

NASA Astrophysics Data System (ADS)

Murrill, Steven R.; Franck, Charmaine C.; Espinola, Richard L.; Petkie, Douglas T.; De Lucia, Frank C.; Jacobs, Eddie L.

2011-11-01

The U.S. Army Research Laboratory (ARL) and the U.S. Army Night Vision and Electronic Sensors Directorate (NVESD) have developed a terahertz-band imaging system performance model/tool for detection and identification of concealed weaponry. The details of the MATLAB-based model which accounts for the effects of all critical sensor and display components, and for the effects of atmospheric attenuation, concealment material attenuation, and active illumination, were reported on at the 2005 SPIE Europe Security & Defence Symposium (Brugge). An advanced version of the base model that accounts for both the dramatic impact that target and background orientation can have on target observability as related to specular and Lambertian reflections captured by an active-illumination-based imaging system, and for the impact of target and background thermal emission, was reported on at the 2007 SPIE Defense and Security Symposium (Orlando). This paper will provide a comprehensive review of an enhanced, user-friendly, Windows-executable, terahertz-band imaging system performance analysis and design tool that now includes additional features such as a MODTRAN-based atmospheric attenuation calculator and advanced system architecture configuration inputs that allow for straightforward performance analysis of active or passive systems based on scanning (single- or line-array detector element(s)) or staring (focal-plane-array detector elements) imaging architectures. This newly enhanced THz imaging system design tool is an extension of the advanced THz imaging system performance model that was developed under the Defense Advanced Research Project Agency's (DARPA) Terahertz Imaging Focal-Plane Technology (TIFT) program. This paper will also provide example system component (active-illumination source and detector) trade-study analyses using the new features of this user-friendly THz imaging system performance analysis and design tool.

Towards an integrated defense system for cyber security situation awareness experiment

NASA Astrophysics Data System (ADS)

Zhang, Hanlin; Wei, Sixiao; Ge, Linqiang; Shen, Dan; Yu, Wei; Blasch, Erik P.; Pham, Khanh D.; Chen, Genshe

2015-05-01

In this paper, an implemented defense system is demonstrated to carry out cyber security situation awareness. The developed system consists of distributed passive and active network sensors designed to effectively capture suspicious information associated with cyber threats, effective detection schemes to accurately distinguish attacks, and network actors to rapidly mitigate attacks. Based on the collected data from network sensors, image-based and signals-based detection schemes are implemented to detect attacks. To further mitigate attacks, deployed dynamic firewalls on hosts dynamically update detection information reported from the detection schemes and block attacks. The experimental results show the effectiveness of the proposed system. A future plan to design an effective defense system is also discussed based on system theory.

A Comparison of Web-Based and Paper-and-Pencil Homework on Student Performance in College Algebra

ERIC Educational Resources Information Center

Hauk, Shandy; Powers, Robert A.; Segalla, Angelo

2015-01-01

College algebra fulfills general education requirements at many colleges in the United States. The study reported here investigated differences in mathematics achievement between undergraduates in college algebra classes using one of two homework methods: "WeBWorK," an open-source system for web-based homework, or traditional…

Paper-based electrochemical sensing platform with integral battery and electrochromic read-out.

PubMed

Liu, Hong; Crooks, Richard M

2012-03-06

We report a battery-powered, microelectrochemical sensing platform that reports its output using an electrochromic display. The platform is fabricated based on paper fluidics and uses a Prussian blue spot electrodeposited on an indium-doped tin oxide thin film as the electrochromic indicator. The integrated metal/air battery powers both the electrochemical sensor and the electrochromic read-out, which are in electrical contact via a paper reservoir. The sample activates the battery and the presence of analyte in the sample initiates the color change of the Prussian blue spot. The entire system is assembled on the lab bench, without the need for cleanroom facilities. The applicability of the device to point-of-care sensing is demonstrated by qualitative detection of 0.1 mM glucose and H(2)O(2) in artificial urine samples.

Use of an electronic medical record improves the quality of urban pediatric primary care.

PubMed

Adams, William G; Mann, Adriana M; Bauchner, Howard

2003-03-01

To evaluate the quality of pediatric primary care, including preventive services, before and after the introduction of an electronic medical record (EMR) developed for use in an urban pediatric primary care center. A pre-postintervention analysis was used in the study. The intervention was a pediatric EMR. Routine health care maintenance visits for children <5 years old were reviewed, and documentation during preintervention (paper-based, 1998) and postintervention visits (computer-based, 2000) was compared. A total of 235 paper-based visits and 986 computer-based visits met study criteria. Twelve clinicians (all attendings or nurse practitioners) contributed an average of 19.4 paper-based visits (range: 5-39) and 7 of these clinicians contributed an average of 141 computer-based visits each (range: 61-213). Computer-based clinicians were significantly more likely to address a variety of routine health care maintenance topics including: diet (relative risk [RR]: 1.09), sleep (RR: 1.46), at least 1 psychosocial issue (RR: 1.42), smoking in the home (RR: 15.68), lead risk assessment (RR: 106.54), exposure to domestic or community violence (RR: 35.19), guns in the home (RR: 58.11), behavioral or social developmental milestones (RR: 2.49), infant sleep position (RR: 9.29), breastfeeding (RR: 1.99), poison control (RR: 3.82), and child safety (RR: 1.29). Trends toward improved lead exposure, vision, and hearing screening were seen; however, differences were not significant. Users of the system reported that its use had improved the overall quality of care delivered, was well-accepted by families, and improved guidance quality; however, 5 of 7 users reported that eye-to-eye contact with patients was reduced, and 4 of 7 reported that use of the system increased the duration of visits (mean: 9.3 minutes longer). All users recommended continued use of the system. Use of the EMR in this study was associated with improved quality of care. This experience suggests that EMRs can be successfully used in busy urban pediatric primary care centers and, as recommended by the Institute of Medicine, must play a central role in the redesign of the US health care system.

Design of smart home gateway based on Wi-Fi and ZigBee

NASA Astrophysics Data System (ADS)

Li, Yang

2018-04-01

With the increasing demand for home lifestyle, the traditional smart home products have been unable to meet the needs of users. Aim at the complex wiring, high cost and difficult operation problems of traditional smart home system, this paper designs a home gateway for smart home system based on Wi-Fi and ZigBee. This paper first gives a smart home system architecture base on cloud server, Wi-Fi and ZigBee. This architecture enables users to access the smart home system remotely from Internet through the cloud server or through Wi-Fi at home. It also offers the flexibility and low cost of ZigBee wireless networking for home equipment. This paper analyzes the functional requirements of the home gateway, and designs a modular hardware architecture based on the RT5350 wireless gateway module and the CC2530 ZigBee coordinator module. Also designs the software of the home gateway, including the gateway master program and the ZigBee coordinator program. Finally, the smart home system and home gateway are tested in two kinds of network environments, internal network and external network. The test results show that the designed home gateway can meet the requirements, support remote and local access, support multi-user, support information security technology, and can timely report equipment status information.

Qualitative and quantitative evaluation of EHR-integrated mobile patient questionnaires regarding usability and cost-efficiency.

PubMed

Fritz, Fleur; Balhorn, Sebastian; Riek, Markus; Breil, Bernhard; Dugas, Martin

2012-05-01

The objective of this evaluation study is to assess a web-based application, currently available on iPad, to document questionnaires regarding patient reported outcomes such as quality of life. Based on the single source approach, the results of these questionnaires are available in the electronic health record to be used for treatment and research purposes. The assessment focuses on the usability and efficiency of the system. The system usability scale questionnaire with seven additional items was used to rate the usability by the patients. It was formally validated by a Cronbach Alpha test. In addition, semi-structured interviews were conducted with patients and medical staff. Time and cost measures, based on official tables of costs, were taken through workflow observations. This study was conducted in the department of dermatology at the University Hospital of Münster, Germany from April to June 2011. Using the web-based application questionnaire, results about patient reported outcomes like quality of life are immediately available in the electronic health record and can be used for treatment or research purposes. 118 patients and four staff members participated in the study. The usability score reached 80 from 100 points and patients as well as medical staff stated in the interviews that the usability of the web-based system was high, and they preferred it to the previously used paper-based questionnaires. In the setting of our pilot department the mobile devices amortized their costs after 6.7 months. In general, depending on the professional group who are going to post process the paper-based forms, the earliest break-even point to use mobile questionnaires is at 1737 paper sheets per year. The mobile patient questionnaires, integrated into the electronic health record, were well accepted in our pilot setting with high usability scores from patients and medical staff alike. The system has also proved to be cost-efficient compared to the paper-based workflow, given that a certain number of questionnaires is used per year. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Ontology-based reusable clinical document template production system.

PubMed

Nam, Sejin; Lee, Sungin; Kim, James G Boram; Kim, Hong-Gee

2012-01-01

Clinical documents embody professional clinical knowledge. This paper shows an effective clinical document template (CDT) production system that uses a clinical description entity (CDE) model, a CDE ontology, and a knowledge management system called STEP that manages ontology-based clinical description entities. The ontology represents CDEs and their inter-relations, and the STEP system stores and manages CDE ontology-based information regarding CDTs. The system also provides Web Services interfaces for search and reasoning over clinical entities. The system was populated with entities and relations extracted from 35 CDTs that were used in admission, discharge, and progress reports, as well as those used in nursing and operation functions. A clinical document template editor is shown that uses STEP.

First Operational Experience With a High-Energy Physics Run Control System Based on Web Technologies

NASA Astrophysics Data System (ADS)

Bauer, Gerry; Beccati, Barbara; Behrens, Ulf; Biery, Kurt; Branson, James; Bukowiec, Sebastian; Cano, Eric; Cheung, Harry; Ciganek, Marek; Cittolin, Sergio; Coarasa Perez, Jose Antonio; Deldicque, Christian; Erhan, Samim; Gigi, Dominique; Glege, Frank; Gomez-Reino, Robert; Gulmini, Michele; Hatton, Derek; Hwong, Yi Ling; Loizides, Constantin; Ma, Frank; Masetti, Lorenzo; Meijers, Frans; Meschi, Emilio; Meyer, Andreas; Mommsen, Remigius K.; Moser, Roland; O'Dell, Vivian; Oh, Alexander; Orsini, Luciano; Paus, Christoph; Petrucci, Andrea; Pieri, Marco; Racz, Attila; Raginel, Olivier; Sakulin, Hannes; Sani, Matteo; Schieferdecker, Philipp; Schwick, Christoph; Shpakov, Dennis; Simon, Michal; Sumorok, Konstanty; Yoon, Andre Sungho

2012-08-01

Run control systems of modern high-energy particle physics experiments have requirements similar to those of today's Internet applications. The Compact Muon Solenoid (CMS) collaboration at CERN's Large Hadron Collider (LHC) therefore decided to build the run control system for its detector based on web technologies. The system is composed of Java Web Applications distributed over a set of Apache Tomcat servlet containers that connect to a database back-end. Users interact with the system through a web browser. The present paper reports on the successful scaling of the system from a small test setup to the production data acquisition system that comprises around 10.000 applications running on a cluster of about 1600 hosts. We report on operational aspects during the first phase of operation with colliding beams including performance, stability, integration with the CMS Detector Control System and tools to guide the operator.

Object-Oriented Modeling of an Energy Harvesting System Based on Thermoelectric Generators

NASA Astrophysics Data System (ADS)

Nesarajah, Marco; Frey, Georg

This paper deals with the modeling of an energy harvesting system based on thermoelectric generators (TEG), and the validation of the model by means of a test bench. TEGs are capable to improve the overall energy efficiency of energy systems, e.g. combustion engines or heating systems, by using the remaining waste heat to generate electrical power. Previously, a component-oriented model of the TEG itself was developed in Modelica® language. With this model any TEG can be described and simulated given the material properties and the physical dimension. Now, this model was extended by the surrounding components to a complete model of a thermoelectric energy harvesting system. In addition to the TEG, the model contains the cooling system, the heat source, and the power electronics. To validate the simulation model, a test bench was built and installed on an oil-fired household heating system. The paper reports results of the measurements and discusses the validity of the developed simulation models. Furthermore, the efficiency of the proposed energy harvesting system is derived and possible improvements based on design variations tested in the simulation model are proposed.

Computer Aided Diagnostic Support System for Skin Cancer: A Review of Techniques and Algorithms

PubMed Central

Masood, Ammara; Al-Jumaily, Adel Ali

2013-01-01

Image-based computer aided diagnosis systems have significant potential for screening and early detection of malignant melanoma. We review the state of the art in these systems and examine current practices, problems, and prospects of image acquisition, pre-processing, segmentation, feature extraction and selection, and classification of dermoscopic images. This paper reports statistics and results from the most important implementations reported to date. We compared the performance of several classifiers specifically developed for skin lesion diagnosis and discussed the corresponding findings. Whenever available, indication of various conditions that affect the technique's performance is reported. We suggest a framework for comparative assessment of skin cancer diagnostic models and review the results based on these models. The deficiencies in some of the existing studies are highlighted and suggestions for future research are provided. PMID:24575126

Using a trauma-informed policy approach to create a resilient urban food system.

PubMed

Hecht, Amelie A; Biehl, Erin; Buzogany, Sarah; Neff, Roni A

2018-07-01

Food insecurity is associated with toxic stress and adverse long-term physical and mental health outcomes. It can be experienced chronically and also triggered or exacerbated by natural and human-made hazards that destabilize the food system. The Baltimore Food System Resilience Advisory Report was created to strengthen the resilience of the city's food system and improve short- and long-term food security. Recognizing food insecurity as a form of trauma, the report was developed using the principles of trauma-informed social policy. In the present paper, we examine how the report applied trauma-informed principles to policy development, discuss the challenges and benefits of using a trauma-informed approach, and provide recommendations for others seeking to create trauma-informed food policy. Report recommendations were developed based on: semi-structured interviews with food system stakeholders; input from community members at outreach events; a literature review; Geographic Information System mapping; and other analyses. The present paper explores findings from the stakeholder interviews. Baltimore, Maryland, USA. Baltimore food system stakeholders stratified by two informant categories: organizations focused on promoting food access (n 13) and community leaders (n 12). Stakeholder interviews informed the recommendations included in the report and supported the idea that chronic and acute food insecurity are experienced as trauma in the Baltimore community. Applying a trauma-informed approach to the development of the Baltimore Food System Resilience Advisory Report contributed to policy recommendations that were community-informed and designed to lessen the traumatic impact of food insecurity.

Geodemographics as a tool for targeting neighbourhoods in public health campaigns

NASA Astrophysics Data System (ADS)

Petersen, Jakob; Gibin, Maurizio; Longley, Paul; Mateos, Pablo; Atkinson, Philip; Ashby, David

2011-06-01

Geodemographics offers the prospects of integrating, modelling and mapping health care needs and other health indicators that are useful for targeting neighbourhoods in public health campaigns. Yet reports about this application domain has to date been sporadic. The purpose of this paper is to examine the potential of a bespoke geodemographic system for neighbourhood targeting in an inner city public health authority, Southwark Primary Care Trust, London. This system, the London Output Area Classification (LOAC), is compared to six other geodemographic systems from both governmental and commercial sources. The paper proposes two new indicators for assessing the performance of geodemographic systems for neighbourhood targeting based on local hospital demand data. The paper also analyses and discusses the utility of age- and sex standardisation of geodemographic profiles of health care demand.

Developing Guidelines for Assessing Visual Analytics Environments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Scholtz, Jean

2011-07-01

In this paper, we develop guidelines for evaluating visual analytic environments based on a synthesis of reviews for the entries to the 2009 Visual Analytics Science and Technology (VAST) Symposium Challenge and from a user study with professional intelligence analysts. By analyzing the 2009 VAST Challenge reviews we gained a better understanding of what is important to our reviewers, both visualization researchers and professional analysts. We also report on a small user study with professional analysts to determine the important factors that they use in evaluating visual analysis systems. We then looked at guidelines developed by researchers in various domainsmore » and synthesized these into an initial set for use by others in the community. In a second part of the user study, we looked at guidelines for a new aspect of visual analytic systems – the generation of reports. Future visual analytic systems have been challenged to help analysts generate their reports. In our study we worked with analysts to understand the criteria they used to evaluate the quality of analytic reports. We propose that this knowledge will be useful as researchers look at systems to automate some of the report generation.1 Based on these efforts, we produced some initial guidelines for evaluating visual analytic environment and for evaluation of analytic reports. It is important to understand that these guidelines are initial drafts and are limited in scope because of the type of tasks for which the visual analytic systems used in the studies in this paper were designed. More research and refinement is needed by the Visual Analytics Community to provide additional evaluation guidelines for different types of visual analytic environments.« less

It's Easy To Be Wise after the Event: Concepts for Redesigning an Educational System on Logistics Derived from Reflecting Its Development and Use.

ERIC Educational Resources Information Center

Neumann, Gaby; Ziems, Dietrich; Hopner, Christian

This paper introduces a multimedia-based educational system on logistics developed at the University of Magdeburg (Germany), reports on development and implementation of the prototype, and discusses ideas for redesign. The system was tested, used, and evaluated at the university and within a European network of 24 universities, colleges, and…

A MEMS-based super fast dew point hygrometer—construction and medical applications

NASA Astrophysics Data System (ADS)

Jachowicz, Ryszard S.; Weremczuk, Jerzy; Paczesny, Daniel; Tarapata, Grzegorz

2009-12-01

The paper shows how MEMS (micro-electro-mechanical system) technology and a modified principle of fast temperature control (by heat injection instead of careful control of cooling) can considerably improve the dynamic parameters of dew point hygrometers. Some aspects of MEMS-type integrated sensor construction and technology, whole measurement system design, the control algorithm to run the system as well as empirical dynamic parameters from the tests are discussed too. The hygrometer can easily obtain five to six measurements per second with an uncertainty of less than 0.3 K. The meter range is between -10 °C and 40 °C dew point. In the second part of the paper (section 2), two different successful applications in medicine based on fast humidity measurements have been discussed. Some specific constructions of these super fast dew point hygrometers based on a MEMS sensor as well as limited empirical results from clinical tests have been reported too.

Characterization of plasticized PEO-PAM blend polymer electrolyte system

NASA Astrophysics Data System (ADS)

Dave, Gargi; Kanchan, Dinesh

2017-05-01

Present study reports characterization studies of NaCF3SO3 based PEO-PAM Blend Polymer Electrolyte (BPE) system with varying amount of EC+PC as plasticizer prepared by solution cast technique. Structural analysis and surface topography have been performed using FTIR and SEM studies. To understand, thermal properties, DSC studies have been undertaken in the present paper

Utilizing JUSUR in an Information Systems Course

ERIC Educational Resources Information Center

Zouhair, Jalila

2010-01-01

The aims of this paper are to report the perceptions of both faculty and students when JUSUR, a web based Learning Management System, is used to supplement the teaching inside and outside the classroom during one academic subject; and to compare the experience of the instructor who had previously taught the same course using a course website to…

Examining the Use of Computer Algebra Systems in University-Level Mathematics Teaching

ERIC Educational Resources Information Center

Lavicza, Zsolt

2009-01-01

The use of Computer Algebra Systems (CAS) is becoming increasingly important and widespread in mathematics research and teaching. In this paper, I will report on a questionnaire study enquiring about mathematicians' use of CAS in mathematics teaching in three countries; the United States, the United Kingdom, and Hungary. Based on the responses…

Building Intrusion Detection with a Wireless Sensor Network

NASA Astrophysics Data System (ADS)

Wälchli, Markus; Braun, Torsten

This paper addresses the detection and reporting of abnormal building access with a wireless sensor network. A common office room, offering space for two working persons, has been monitored with ten sensor nodes and a base station. The task of the system is to report suspicious office occupation such as office searching by thieves. On the other hand, normal office occupation should not throw alarms. In order to save energy for communication, the system provides all nodes with some adaptive short-term memory. Thus, a set of sensor activation patterns can be temporarily learned. The local memory is implemented as an Adaptive Resonance Theory (ART) neural network. Unknown event patterns detected on sensor node level are reported to the base station, where the system-wide anomaly detection is performed. The anomaly detector is lightweight and completely self-learning. The system can be run autonomously or it could be used as a triggering system to turn on an additional high-resolution system on demand. Our building monitoring system has proven to work reliably in different evaluated scenarios. Communication costs of up to 90% could be saved compared to a threshold-based approach without local memory.

Silicon nanowires reliability and robustness investigation using AFM-based techniques

NASA Astrophysics Data System (ADS)

Bieniek, Tomasz; Janczyk, Grzegorz; Janus, Paweł; Grabiec, Piotr; Nieprzecki, Marek; Wielgoszewski, Grzegorz; Moczała, Magdalena; Gotszalk, Teodor; Buitrago, Elizabeth; Badia, Montserrat F.; Ionescu, Adrian M.

2013-07-01

Silicon nanowires (SiNWs) have undergone intensive research for their application in novel integrated systems such as field effect transistor (FET) biosensors and mass sensing resonators profiting from large surface-to-volume ratios (nano dimensions). Such devices have been shown to have the potential for outstanding performances in terms of high sensitivity, selectivity through surface modification and unprecedented structural characteristics. This paper presents the results of mechanical characterization done for various types of suspended SiNWs arranged in a 3D array. The characterization has been performed using techniques based on atomic force microscopy (AFM). This investigation is a necessary prerequisite for the reliable and robust design of any biosensing system. This paper also describes the applied investigation methodology and reports measurement results aggregated during series of AFM-based tests.

Supporting Assessment Autonomy: How One Small School Articulated the Infrastructure Needed to Own and Use Student Data

ERIC Educational Resources Information Center

Quartz, Karen Hunter; Kawasaki, Jarod; Sotelo, Daniel; Merino, Kimberly

2014-01-01

This paper reports the results of an 18-month integrated, problem-solving research study of one new school's efforts to create a K-12 system of student assessment data that reflects their innovative vision for personalized and student-centered instruction. Based on interview, observational, and documentary data, the authors report how…

The NASA Aviation Safety Reporting System

NASA Technical Reports Server (NTRS)

1983-01-01

This is the fourteenth in a series of reports based on safety-related incidents submitted to the NASA Aviation Safety Reporting System by pilots, controllers, and, occasionally, other participants in the National Aviation System (refs. 1-13). ASRS operates under a memorandum of agreement between the National Aviation and Space Administration and the Federal Aviation Administration. The report contains, first, a special study prepared by the ASRS Office Staff, of pilot- and controller-submitted reports related to the perceived operation of the ATC system since the 1981 walkout of the controllers' labor organization. Next is a research paper analyzing incidents occurring while single-pilot crews were conducting IFR flights. A third section presents a selection of Alert Bulletins issued by ASRS, with the responses they have elicited from FAA and others concerned. Finally, the report contains a list of publications produced by ASRS with instructions for obtaining them.

Artificial Intelligence Technology for the Maintainer's Associate. Final Report for the Period October 1983 to December 1985.

ERIC Educational Resources Information Center

Richardson, J. Jeffrey; And Others

In keeping with current Department of Defense policies on integrated diagnostics and a reduced reliance on paper-based documentation, the concept of a portable, expert-system-based job aid and training device was proposed to assist inexperienced electronics maintenance technicians in learning to maintain sophisticated equipment. A prototype was…

The Benefits of Florida's Test-Based Promotion System. Civic Report. No. 68

ERIC Educational Resources Information Center

Winters, Marcus A.

2012-01-01

State and municipal policymakers are increasingly addressing the practice of social promotion in schools--moving children along to the next grade whether or not they have mastered the curriculum--by mandating test-based grade promotion. This paper draws conclusions about the effects of a policy limiting social promotion. To do so, it employs a…

The Role of Activity Based Costing (ABC) in Educational Support Services: A White Paper.

ERIC Educational Resources Information Center

Edds, Daniel B.

Many front-line managers who are assuming more financial responsibility for their organizations find traditional cost accounting inadequate for their needs and are turning to Activity Based Costing (ABC). ABC is not a financial reporting system to serve the needs of regulatory agencies, but a tool that tracks costs from the general ledger…

A Central Support System Can Facilitate Implementation and Sustainability of a Classroom-Based Undergraduate Research Experience (CURE) in Genomics

ERIC Educational Resources Information Center

Lopatto, David; Hauser, Charles; Jones, Christopher J.; Paetkau, Don; Chandrasekaran, Vidya; Dunbar, David; MacKinnon, Christy; Stamm, Joyce; Alvarez, Consuelo; Barnard, Daron; Bedard, James E. J.; Bednarski, April E.; Bhalla, Satish; Braverman, John M.; Burg, Martin; Chung, Hui-Min; DeJong, Randall J.; DiAngelo, Justin R.; Du, Chunguang; Eckdahl, Todd T.; Emerson, Julia; Frary, Amy; Frohlich, Donald; Goodman, Anya L.; Gosser, Yuying; Govind, Shubha; Haberman, Adam; Hark, Amy T.; Hoogewerf, Arlene; Johnson, Diana; Kadlec, Lisa; Kaehler, Marian; Key, S. Catherine Silver; Kokan, Nighat P.; Kopp, Olga R.; Kuleck, Gary A.; Lopilato, Jane; Martinez-Cruzado, Juan C.; McNeil, Gerard; Mel, Stephanie; Nagengast, Alexis; Overvoorde, Paul J.; Parrish, Susan; Preuss, Mary L.; Reed, Laura D.; Regisford, E. Gloria; Revie, Dennis; Robic, Srebrenka; Roecklien-Canfield, Jennifer A.; Rosenwald, Anne G.; Rubin, Michael R.; Saville, Kenneth; Schroeder, Stephanie; Sharif, Karim A.; Shaw, Mary; Skuse, Gary; Smith, Christopher D.; Smith, Mary; Smith, Sheryl T.; Spana, Eric P.; Spratt, Mary; Sreenivasan, Aparna; Thompson, Jeffrey S.; Wawersik, Matthew; Wolyniak, Michael J.; Youngblom, James; Zhou, Leming; Buhler, Jeremy; Mardis, Elaine; Leung, Wilson; Shaffer, Christopher D.; Threlfall, Jennifer; Elgin, Sarah C. R.

2014-01-01

In their 2012 report, the President's Council of Advisors on Science and Technology advocated "replacing standard science laboratory courses with discovery-based research courses"--a challenging proposition that presents practical and pedagogical difficulties. In this paper, we describe our collective experiences working with the…

School-Based Mental Health Services: Service System Reform in South Carolina.

ERIC Educational Resources Information Center

Motes, Patricia Stone; Pumariega, Andres; Simpson, Mary Ann; Sanderson, Jennifer

This paper reports on the University of South Carolina School-Based Mental Health Project, a program which provides mental health services within a public school setting in an effort to maximize the preventive and educational effects of mental health services within schools. The project is also developing a model to serve as a foundation for a…

Predicting medical staff intention to use an online reporting system with modified unified theory of acceptance and use of technology.

PubMed

Chang, I-Chiu; Hsu, Hui-Mei

2012-01-01

Barriers to report incident events using an online information system (IS) may be different from those of a paper-based reporting system. The nationwide online Patient-Safety Reporting System (PSRS) contains a value judgment behind use of the system, similar to the Value of Perceived Consequence (VPC), which is seldom discussed in ISs applications of other disciplines. This study developed a more adequate research framework by integrating the VPC construct into the well-known Unified Theory of Acceptance and Use of Technology (UTAUT) model as a theoretical base to explore the predictors of medical staff's intention to use online PSRS. The results showed that management support was an important factor to influence medical staff's intention of using PSRS. The effects of factors such as performance expectancy, perceived positive, and perceived negative consequence on medical staff's intention of using PSRS were moderated by gender, age, experience, and occupation. The results proved that the modified UTAUT model is significant and useful in predicting medical staff's intention of using the nationwide online PSRS.

Limitations and obstacles of the spontaneous adverse drugs reactions reporting: Two “challenging” case reports

PubMed Central

Palleria, Caterina; Leporini, Christian; Chimirri, Serafina; Marrazzo, Giuseppina; Sacchetta, Sabrina; Bruno, Lucrezia; Lista, Rosaria M.; Staltari, Orietta; Scuteri, Antonio; Scicchitano, Francesca; Russo, Emilio

2013-01-01

Introduction: Nowadays, based on several epidemiological data, iatrogenic disease is an emerging public health problem, especially in industrialized countries. Adverse drugs reactions (ADRs) are extremely common and, therefore, clinically, socially, and economically worthy of attention. Spontaneous reporting system for suspected ADRs represents the cornerstone of the pharmacovigilance, because it allows rapid detection of potential alarm signals related to drugs use. However, spontaneous reporting system shows several limitations, which are mainly related to under-reporting. In this paper, we describe two particular case reports, which emphasize some reasons of under-reporting and other common criticisms of spontaneous reporting systems. Materials and Methods: We performed a computer-aided search of Medline, PubMed, Embase, Cochrane library databases, national and international databases of suspected ADRs reports in order to identify previous published case reports and spontaneous reports about the ADRs reviewed in this paper, and to examine the role of suspected drugs in the pathogenesis of the described adverse reactions. Results: First, we reported a case of tizanidine-induced hemorrhagic cystitis. In the second case report, we presented an episode of asthma exacerbation after taking bimatoprost. Through the review of these two cases, we highlighted some common criticisms of spontaneous reporting systems: under-reporting and false causality attribution. Discussion and Conclusion: Healthcare workers sometimes do not report ADRs because it is challenging to establish with certainty the causal relationship between drug and adverse reaction; however, according to a key principle of pharmacovigilance, it is always better to report even a suspicion to generate an alarm in the interest of protecting public health. PMID:24347986

Limitations and obstacles of the spontaneous adverse drugs reactions reporting: Two "challenging" case reports.

PubMed

Palleria, Caterina; Leporini, Christian; Chimirri, Serafina; Marrazzo, Giuseppina; Sacchetta, Sabrina; Bruno, Lucrezia; Lista, Rosaria M; Staltari, Orietta; Scuteri, Antonio; Scicchitano, Francesca; Russo, Emilio

2013-12-01

Nowadays, based on several epidemiological data, iatrogenic disease is an emerging public health problem, especially in industrialized countries. Adverse drugs reactions (ADRs) are extremely common and, therefore, clinically, socially, and economically worthy of attention. Spontaneous reporting system for suspected ADRs represents the cornerstone of the pharmacovigilance, because it allows rapid detection of potential alarm signals related to drugs use. However, spontaneous reporting system shows several limitations, which are mainly related to under-reporting. In this paper, we describe two particular case reports, which emphasize some reasons of under-reporting and other common criticisms of spontaneous reporting systems. We performed a computer-aided search of Medline, PubMed, Embase, Cochrane library databases, national and international databases of suspected ADRs reports in order to identify previous published case reports and spontaneous reports about the ADRs reviewed in this paper, and to examine the role of suspected drugs in the pathogenesis of the described adverse reactions. First, we reported a case of tizanidine-induced hemorrhagic cystitis. In the second case report, we presented an episode of asthma exacerbation after taking bimatoprost. Through the review of these two cases, we highlighted some common criticisms of spontaneous reporting systems: under-reporting and false causality attribution. Healthcare workers sometimes do not report ADRs because it is challenging to establish with certainty the causal relationship between drug and adverse reaction; however, according to a key principle of pharmacovigilance, it is always better to report even a suspicion to generate an alarm in the interest of protecting public health.

Ship Detection Using High Resolution Satellite Imagery and Space-Based AIS

NASA Astrophysics Data System (ADS)

Hannevik, Tonje Nanette; Skauen, Andreas N.; Olsen, R. B.

2013-03-01

This paper presents a trial carried out in the Malangen area close to Tromsø city in the north of Norway in September 2010. High resolution Synthetic Aperture Radar (SAR) images from RADARSAT-2 were used to analyse how SAR images and cooperative reporting can be combined. Data from the Automatic Identification System, both land-based and space-based, have been used to identify detected vessels in the SAR images. The paper presents results of ship detection in high resolution RADARSAT-2 Standard Quad-Pol images, and how these results together with land-based and space-based AIS can be used. Some examples of tracking of vessels are also shown.

Fault Location Based on Synchronized Measurements: A Comprehensive Survey

PubMed Central

Al-Mohammed, A. H.; Abido, M. A.

2014-01-01

This paper presents a comprehensive survey on transmission and distribution fault location algorithms that utilize synchronized measurements. Algorithms based on two-end synchronized measurements and fault location algorithms on three-terminal and multiterminal lines are reviewed. Series capacitors equipped with metal oxide varistors (MOVs), when set on a transmission line, create certain problems for line fault locators and, therefore, fault location on series-compensated lines is discussed. The paper reports the work carried out on adaptive fault location algorithms aiming at achieving better fault location accuracy. Work associated with fault location on power system networks, although limited, is also summarized. Additionally, the nonstandard high-frequency-related fault location techniques based on wavelet transform are discussed. Finally, the paper highlights the area for future research. PMID:24701191

Ultralight Cut-Paper-Based Self-Charging Power Unit for Self-Powered Portable Electronic and Medical Systems.

PubMed

Guo, Hengyu; Yeh, Min-Hsin; Zi, Yunlong; Wen, Zhen; Chen, Jie; Liu, Guanlin; Hu, Chenguo; Wang, Zhong Lin

2017-05-23

The development of lightweight, superportable, and sustainable power sources has become an urgent need for most modern personal electronics. Here, we report a cut-paper-based self-charging power unit (PC-SCPU) that is capable of simultaneously harvesting and storing energy from body movement by combining a paper-based triboelectric nanogenerator (TENG) and a supercapacitor (SC), respectively. Utilizing the paper as the substrate with an assembled cut-paper architecture, an ultralight rhombic-shaped TENG is achieved with highly specific mass/volume charge output (82 nC g -1 /75 nC cm -3 ) compared with the traditional acrylic-based TENG (5.7 nC g -1 /5.8 nC cm -3 ), which can effectively charge the SC (∼1 mF) to ∼1 V in minutes. This wallet-contained PC-SCPU is then demonstrated as a sustainable power source for driving wearable and portable electronic devices such as a wireless remote control, electric watch, or temperature sensor. This study presents a potential paper-based portable SCPU for practical and medical applications.

Proceedings of the Seventh International Symposium on Methodologies for Intelligent Systems (Poster Session)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harber, K.S.

1993-05-01

This report contains the following papers: Implications in vivid logic; a self-learning bayesian expert system; a natural language generation system for a heterogeneous distributed database system; competence-switching'' managed by intelligent systems; strategy acquisition by an artificial neural network: Experiments in learning to play a stochastic game; viewpoints and selective inheritance in object-oriented modeling; multivariate discretization of continuous attributes for machine learning; utilization of the case-based reasoning method to resolve dynamic problems; formalization of an ontology of ceramic science in CLASSIC; linguistic tools for intelligent systems; an application of rough sets in knowledge synthesis; and a relational model for imprecise queries.more » These papers have been indexed separately.« less

Proceedings of the Seventh International Symposium on Methodologies for Intelligent Systems (Poster Session)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harber, K.S.

1993-05-01

This report contains the following papers: Implications in vivid logic; a self-learning Bayesian Expert System; a natural language generation system for a heterogeneous distributed database system; ``competence-switching`` managed by intelligent systems; strategy acquisition by an artificial neural network: Experiments in learning to play a stochastic game; viewpoints and selective inheritance in object-oriented modeling; multivariate discretization of continuous attributes for machine learning; utilization of the case-based reasoning method to resolve dynamic problems; formalization of an ontology of ceramic science in CLASSIC; linguistic tools for intelligent systems; an application of rough sets in knowledge synthesis; and a relational model for imprecise queries.more » These papers have been indexed separately.« less

GIS based solid waste management information system for Nagpur, India.

PubMed

Vijay, Ritesh; Jain, Preeti; Sharma, N; Bhattacharyya, J K; Vaidya, A N; Sohony, R A

2013-01-01

Solid waste management is one of the major problems of today's world and needs to be addressed by proper utilization of technologies and design of effective, flexible and structured information system. Therefore, the objective of this paper was to design and develop a GIS based solid waste management information system as a decision making and planning tool for regularities and municipal authorities. The system integrates geo-spatial features of the city and database of existing solid waste management. GIS based information system facilitates modules of visualization, query interface, statistical analysis, report generation and database modification. It also provides modules like solid waste estimation, collection, transportation and disposal details. The information system is user-friendly, standalone and platform independent.

Natural language processing in pathology: a scoping review.

PubMed

Burger, Gerard; Abu-Hanna, Ameen; de Keizer, Nicolette; Cornet, Ronald

2016-07-22

Encoded pathology data are key for medical registries and analyses, but pathology information is often expressed as free text. We reviewed and assessed the use of NLP (natural language processing) for encoding pathology documents. Papers addressing NLP in pathology were retrieved from PubMed, Association for Computing Machinery (ACM) Digital Library and Association for Computational Linguistics (ACL) Anthology. We reviewed and summarised the study objectives; NLP methods used and their validation; software implementations; the performance on the dataset used and any reported use in practice. The main objectives of the 38 included papers were encoding and extraction of clinically relevant information from pathology reports. Common approaches were word/phrase matching, probabilistic machine learning and rule-based systems. Five papers (13%) compared different methods on the same dataset. Four papers did not specify the method(s) used. 18 of the 26 studies that reported F-measure, recall or precision reported values of over 0.9. Proprietary software was the most frequently mentioned category (14 studies); General Architecture for Text Engineering (GATE) was the most applied architecture overall. Practical system use was reported in four papers. Most papers used expert annotation validation. Different methods are used in NLP research in pathology, and good performances, that is, high precision and recall, high retrieval/removal rates, are reported for all of these. Lack of validation and of shared datasets precludes performance comparison. More comparative analysis and validation are needed to provide better insight into the performance and merits of these methods. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Knowledge Based Systems: A Critical Survey of Major Concepts, Issues, and Techniques. M.S. Thesis Final Report, 1 Jul. 1985 - 31 Dec. 1987

NASA Technical Reports Server (NTRS)

Dominick, Wayne D. (Editor); Kavi, Srinu

1984-01-01

This Working Paper Series entry presents a detailed survey of knowledge based systems. After being in a relatively dormant state for many years, only recently is Artificial Intelligence (AI) - that branch of computer science that attempts to have machines emulate intelligent behavior - accomplishing practical results. Most of these results can be attributed to the design and use of Knowledge-Based Systems, KBSs (or ecpert systems) - problem solving computer programs that can reach a level of performance comparable to that of a human expert in some specialized problem domain. These systems can act as a consultant for various requirements like medical diagnosis, military threat analysis, project risk assessment, etc. These systems possess knowledge to enable them to make intelligent desisions. They are, however, not meant to replace the human specialists in any particular domain. A critical survey of recent work in interactive KBSs is reported. A case study (MYCIN) of a KBS, a list of existing KBSs, and an introduction to the Japanese Fifth Generation Computer Project are provided as appendices. Finally, an extensive set of KBS-related references is provided at the end of the report.

Contributions to the AIAA Guidance, Navigation and Control Conference

NASA Technical Reports Server (NTRS)

Campbell, S. D. (Editor)

2002-01-01

This report contains six papers presented by the Lincoln Laboratory Air Traffic Control Systems Group at the American Institute of Aeronautics & Astronautics (AIAA) Guidance, Navigation and Control (GNC) conference on 6-9 August 2001 in Montreal, Canada. The work reported was sponsored by the NASA Advanced Air Transportation Technologies (AATT) program and the FAA Free Flight Phase 1 (FFP1) program. The papers are based on studies completed at Lincoln Laboratory in collaboration with staff at NASA Ames Research Center. These papers were presented in the Air Traffic Automation Session of the conference and fall into three major areas: Traffic Analysis & Benefits Studies, Weather/Automation Integration and Surface Surveillance. In the first area, a paper by Andrews & Robinson presents an analysis of the efficiency of runway operations at Dallas/Ft. Worth using a tool called PARO, and a paper by Welch, Andrews & Robinson presents a delay benefit results for the Final Approach Spacing Tool (FAST). In the second area, a paper by Campbell, et al describes a new weather distribution systems for the Center/TRACON Automation System (CTAS) that allows ingestion of multiple weather sources, and a paper by Vandevenne, Lloyd & Hogaboom describes the use of the NOAA Eta model as a backup wind data source for CTAS. Also in this area, a paper by Murphy & Campbell presents initial steps towards integrating weather impacted routes into FAST. In the third area, a paper by Welch, Bussolari and Atkins presents an initial operational concept for using surface surveillance to reduce taxi delays.

[Design and implementation of real-time control of changes to national Chinese medicine resources fill system based on GIS].

PubMed

Zhang, Tian; Li, Jun-de; Cheng, Meng; Li, Ying; Lin, Zhong-Bin; Shen, Yi-Hua; Huang, Lu-Qi

2017-11-01

The dynamic monitoring data of traditional Chinese medicine resources is one of the important tasks of the dynamic monitoring system of Chinese medicine resources,the system has formed a periodic monitoring data reporting mechanism. Data authenticity and accuracy are the basis for the sustainable and healthy development of Chinese medicine resources dynamic monitoring,information technology is an effective means to improve the efficiency of data reporting, reporting quality. Data production based on dynamic monitoring is of great significance for grasp the trend of change and development of Chinese medicine resources. In order to achieve the real-time control of changes to the national Chinese medicine resources, we build the Chinese medicine resources dynamic monitoring system. In order to solve the problems in practice, we have upgraded the fill system by using the data of GIS. In order to achieve the multidimensional, improve safety, practicality and standardization of the data, which laid a foundation for subsequent processing of data. The system can collect the information of the cultivation of Chinese herbal medicines,production and sales of daily reporting data, provide the Chinese herbal medicine market,fast growing industry environment such as positioning center. In this paper, the design and implementation of the system are expounded.According to the business requirements, we designed 12 forms, 98 collection indicators to meet the needs of dynamic monitoring of traditional Chinese medicine resources. This paper will introduce the development content, design and implementation, main function characteristics and application effect of the national Chinese medicine resources fill System. To explain the role that GIS technology plays in the system and how to realize the cultivation of Chinese herbal medicines, production and sales of daily reporting data, provide the Chinese herbal medicine market,fast growing industry environment such as positioning center,and information collecting. Copyright© by the Chinese Pharmaceutical Association.

Using System Mass (SM), Equivalent Mass (EM), Equivalent System Mass (ESM) or Life Cycle Mass (LCM) in Advanced Life Support (ALS) Reporting

NASA Technical Reports Server (NTRS)

Jones, Harry

2003-01-01

The Advanced Life Support (ALS) has used a single number, Equivalent System Mass (ESM), for both reporting progress and technology selection. ESM is the launch mass required to provide a space system. ESM indicates launch cost. ESM alone is inadequate for technology selection, which should include other metrics such as Technology Readiness Level (TRL) and Life Cycle Cost (LCC) and also consider perfom.arxe 2nd risk. ESM has proven difficult to implement as a reporting metric, partly because it includes non-mass technology selection factors. Since it will not be used exclusively for technology selection, a new reporting metric can be made easier to compute and explain. Systems design trades-off performance, cost, and risk, but a risk weighted cost/benefit metric would be too complex to report. Since life support has fixed requirements, different systems usually have roughly equal performance. Risk is important since failure can harm the crew, but it is difficult to treat simply. Cost is not easy to estimate, but preliminary space system cost estimates are usually based on mass, which is better estimated than cost. Amass-based cost estimate, similar to ESM, would be a good single reporting metric. The paper defines and compares four mass-based cost estimates, Equivalent Mass (EM), Equivalent System Mass (ESM), Life Cycle Mass (LCM), and System Mass (SM). EM is traditional in life support and includes mass, volume, power, cooling and logistics. ESM is the specifically defined ALS metric, which adds crew time and possibly other cost factors to EM. LCM is a new metric, a mass-based estimate of LCC measured in mass units. SM includes only the factors of EM that are originally measured in mass, the hardware and logistics mass. All four mass-based metrics usually give similar comparisons. SM is by far the simplest to compute and easiest to explain.

Factors associated with good compliance and long-term sustainability in a practitioner-based livestock disease surveillance system.

PubMed

Zurbrigg, Katherine J; Van den Borre, Nicole M

2013-03-01

The Ontario Farm call Surveillance Project (OFSP) was a practitioner-based, syndromic surveillance system for livestock disease. Three data-recording methods (paper, web-based, and handheld electronic) used by participating veterinarians were compared for timeliness (when the report arrived at the OFSP office), completeness of the report, and the usage and costs of incentives offered to veterinarians as compensation for their time to record data. There were no statistically significant differences in these parameters among the 3 data-recording methods. This indicates that different data-recording methods can be used within a single veterinary surveillance program while maintaining data integrity and timely reporting. Factors such as ease of data collection and providing incentives valued by veterinarians ensured high compliance and long-term participation in the project. It also increased the diversity of the participant group, reducing the likelihood of biased data submissions.

Factors associated with good compliance and long-term sustainability in a practitioner-based livestock disease surveillance system

PubMed Central

Zurbrigg, Katherine J.; Van den Borre, Nicole M.

2013-01-01

The Ontario Farm call Surveillance Project (OFSP) was a practitioner-based, syndromic surveillance system for livestock disease. Three data-recording methods (paper, web-based, and handheld electronic) used by participating veterinarians were compared for timeliness (when the report arrived at the OFSP office), completeness of the report, and the usage and costs of incentives offered to veterinarians as compensation for their time to record data. There were no statistically significant differences in these parameters among the 3 data-recording methods. This indicates that different data-recording methods can be used within a single veterinary surveillance program while maintaining data integrity and timely reporting. Factors such as ease of data collection and providing incentives valued by veterinarians ensured high compliance and long-term participation in the project. It also increased the diversity of the participant group, reducing the likelihood of biased data submissions. PMID:23997260

A Design Research Study of a Curriculum and Diagnostic Assessment System for a Learning Trajectory on Equipartitioning

ERIC Educational Resources Information Center

Confrey, Jere; Maloney, Alan

2015-01-01

Design research studies provide significant opportunities to study new innovations and approaches and how they affect the forms of learning in complex classroom ecologies. This paper reports on a two-week long design research study with twelve 2nd through 4th graders using curricular materials and a tablet-based diagnostic assessment system, both…

A research agenda for bridging the 'quality chasm.'.

PubMed

Fernandopulle, Rushika; Ferris, Timothy; Epstein, Arnold; McNeil, Barbara; Newhouse, Joseph; Pisano, Gary; Blumenthal, David

2003-01-01

Realizing the vision of the IOM's landmark report, Crossing the Quality Chasm, will require new knowledge to support new policy and management. This paper lays out a research agenda that must be pursued if the health care system is to bridge the quality chasm. Based on a consensus process involving leading health care researchers and authorities, the paper highlights knowledge gaps and research directions in five areas identified by the Quality Chasm report as critical to its goals of building organizational supports for change; applying evidence to health care delivery; developing information technology; aligning payment policies with quality improvement; and preparing the workforce.

Bringing Back the Social Affordances of the Paper Memo to Aerospace Systems Engineering Work

NASA Technical Reports Server (NTRS)

Davidoff, Scott; Holloway, Alexandra

2014-01-01

Model-based systems engineering (MBSE) is a relatively new field that brings together the interdisciplinary study of technological components of a project (systems engineering) with a model-based ontology to express the hierarchical and behavioral relationships between the components (computational modeling). Despite the compelling promises of the benefits of MBSE, such as improved communication and productivity due to an underlying language and data model, we observed hesitation to its adoption at the NASA Jet Propulsion Laboratory. To investigate, we conducted a six-month ethnographic field investigation and needs validation with 19 systems engineers. This paper contributes our observations of a generational shift in one of JPL's core technologies. We report on a cultural misunderstanding between communities of practice that bolsters the existing technology drag. Given the high cost of failure, we springboard our observations into a design hypothesis - an intervention that blends the social affordances of the narrative-based work flow with the rich technological advantages of explicit data references and relationships of the model-based approach. We provide a design rationale, and the results of our evaluation.

Surveillance of work-related asthma in new york state.

PubMed

Tice, Cori J; Cummings, Karen R; Gelberg, Kitty H

2010-04-01

The objective of this paper is to determine the percent of adults with asthma attributable to work and describe characteristics of the work-related asthma population in New York State. Sociodemographic and control characteristics of those with and without work-related asthma are compared. Data from three population-based surveys and one case-based surveillance system were analyzed. Work-relatedness of asthma was determined by self-report for the population-based surveys and by physician report for the case-based system. Self-reported sociodemographic and control characteristics were analyzed for the population-based surveys by work-relatedness. The percent of work-relatedness among adults with current asthma in New York State ranged from 10.6% to 44.5%. Significantly more adults with work-related asthma had poorly controlled asthma than those without work-related asthma. More adults with work-related asthma also tended to be employed in the manufacturing, educational services, and public administration industries than the general population. The most frequently reported exposure was dust. Adults with work-related asthma have decreased control and adverse socioeconomic impacts compared to those with asthma that is not work-related. Increased recognition and physician reporting is necessary to further prevent the impact of work-related exposures.

The use of multiple models in case-based diagnosis

NASA Technical Reports Server (NTRS)

Karamouzis, Stamos T.; Feyock, Stefan

1993-01-01

The work described in this paper has as its goal the integration of a number of reasoning techniques into a unified intelligent information system that will aid flight crews with malfunction diagnosis and prognostication. One of these approaches involves using the extensive archive of information contained in aircraft accident reports along with various models of the aircraft as the basis for case-based reasoning about malfunctions. Case-based reasoning draws conclusions on the basis of similarities between the present situation and prior experience. We maintain that the ability of a CBR program to reason about physical systems is significantly enhanced by the addition to the CBR program of various models. This paper describes the diagnostic concepts implemented in a prototypical case based reasoner that operates in the domain of in-flight fault diagnosis, the various models used in conjunction with the reasoner's CBR component, and results from a preliminary evaluation.

Per Pupil Expenditures and School District Accreditation: What Does the Total Per Pupil Expenditure Indicator in the 1993 Mississippi Report Card Really Mean?

ERIC Educational Resources Information Center

Mathews, Jerry G.; Johnson, Gary P.

The 1993 Mississippi Report Card was the result of legislative and accountability processes. The state's Education Reform Act of 1982 created a mandate to establish a performance-based school-accreditation system. This paper presents findings of a study that disaggregated and analyzed the total per-pupil expenditure indicators in the 1993…

Barriers to e-health business processes.

PubMed

Mieczkowska, Suzanne; Hinton, Matthew; Barnes, David

2004-01-01

This paper builds from recent case study research in commercial organisations to develop the hypothesis that many of the barriers to e-health processes are similar to those encountered by commercial businesses. The paper reports findings from a case study within the pathology department of a UK National Health Service (NHS) Trust. The NHS has a risk-averse culture where many individuals practice defensive behaviour and there are deeply embedded working practices. The paper suggests that if the NHS is to seize the opportunities offered by substantial new investments in e-health systems that utilise internet-based ICTs, greater effort needs to be made to understand and address the socio-cultural factors affecting the UK healthcare system.

Paper-based membraneless hydrogen peroxide fuel cell prepared by micro-fabrication

NASA Astrophysics Data System (ADS)

Mousavi Ehteshami, Seyyed Mohsen; Asadnia, Mohsen; Tan, Swee Ngin; Chan, Siew Hwa

2016-01-01

A paper-based membraneless single-compartment hydrogen peroxide power source prepared by micro-electromechanical systems (MEMS) technology is reported. The cell utilizes hydrogen peroxide as both fuel and oxidant in a low volume cell fabricated on paper. The fabrication method used is a simple method where precise, small-sized patterns are produced which include the hydrophilic paper bounded by hydrophobic resin. Open circuit potentials of 0.61 V and 0.32 V are achieved for the cells fabricated with Prussian Blue as the cathode and aluminium/nickel as the anode materials, respectively. The power produced by the cells is 0.81 mW cm-2 at 0.26 V and 0.38 mW cm-2 at 0.14 V, respectively, even after the cell is bent or distorted. Such a fuel cell provides an easily fabricated, environmentally friendly, flexible and cost saving power source. The cell may be integrated within a self-sustained diagnostic system to provide the on-demand power for future bio-sensing applications.

A qualitative appraisal of stakeholder reactions to a tool for burden of disease-based health system budgeting in Ghana.

PubMed

Awoonor-Williams, John Koku; Schmitt, Margaret L; Tiah, Janet; Ndago, Joyce; Asuru, Rofina; Bawah, Ayaga A; Phillips, James F

2016-01-01

In 2010, the Ghana Health Service launched a program of cooperation with the Tanzania Ministry of Health and Social Welfare that was designed to adapt Tanzania's PLANREP budgeting and reporting tool to Ghana's primary health care program. The product of this collaboration is a system of budgeting, data visualization, and reporting that is known as the District Health Planning and Reporting Tool (DiHPART). This study was conducted to evaluate the design and implementation processes (technical, procedures, feedback, maintenance, and monitoring) of the DiHPART tool in northern Ghana. This paper reports on a qualitative appraisal of user reactions to the DiHPART system and implications of pilot experience for national scale-up. A total of 20 health officials responsible for financial planning operations were drawn from the national, regional, and district levels of the health system and interviewed in open-ended discussions about their reactions to DiHPART and suggestions for systems development. The findings show that technical shortcomings merit correction before scale-up can proceed. The review makes note of features of the software system that could be developed, based on experience gained from the pilot. Changes in the national system of financial reporting and budgeting complicate DiHPART utilization. This attests to the importance of pursuing a software application framework that anticipates the need for automated software generation. Despite challenges encountered in the pilot, the results lend support to the notion that evidence-based budgeting merits development and implementation in Ghana.

Building an Online Library for Interpretation Training: Explorations into an Effective Blended-Learning Mode

ERIC Educational Resources Information Center

Chan, Clara Ho-yan

2014-01-01

This paper reports on a blended-learning project that aims to develop a web-based library of interpreting practice resources built on the course management system Blackboard for Hong Kong interpretation students to practise outside the classroom. It also evaluates the library's effectiveness for learning, based on a case study that uses it to…

Developing a Cross-Platform Web Application for Online EFL Vocabulary Learning Courses

ERIC Educational Resources Information Center

Enokida, Kazumichi; Sakaue, Tatsuya; Morita, Mitsuhiro; Kida, Shusaku; Ohnishi, Akio

2017-01-01

In this paper, the development of a web application for self-access English vocabulary courses at a national university in Japan will be reported upon. Whilst the basic concepts are inherited from an old Flash-based online vocabulary learning system that had been long used at the university, the new HTML5-based app comes with several new features…

TBT: Telecommunications-Based Training in the 90s (DELTA Programme--Action Line III). Proceedings of the Workshop (Madrid, Spain, January 21-22, 1991).

ERIC Educational Resources Information Center

Commission of the European Communities, Brussels (Belgium).

This report contains a collection of papers presented at a workshop on telecommunications-based training systems as part of the DELTA (Developing European Learning through Technological Advance) Action Line III, which addressed research in telecommunications for open and distance education. The following presentations are included: (1)…

Assessing I-Grid(TM) web-based monitoring for power quality and reliability benchmarking

DOE Office of Scientific and Technical Information (OSTI.GOV)

Divan, Deepak; Brumsickle, William; Eto, Joseph

2003-04-30

This paper presents preliminary findings from DOEs pilot program. The results show how a web-based monitoring system can form the basis for aggregation of data and correlation and benchmarking across broad geographical lines. A longer report describes additional findings from the pilot, including impacts of power quality and reliability on customers operations [Divan, Brumsickle, Eto 2003].

Winter Simulation Conference, Miami Beach, Fla., December 4-6, 1978, Proceedings. Volumes 1 & 2

NASA Technical Reports Server (NTRS)

Highland, H. J. (Editor); Nielsen, N. R.; Hull, L. G.

1978-01-01

The papers report on the various aspects of simulation such as random variate generation, simulation optimization, ranking and selection of alternatives, model management, documentation, data bases, and instructional methods. Simulation studies in a wide variety of fields are described, including system design and scheduling, government and social systems, agriculture, computer systems, the military, transportation, corporate planning, ecosystems, health care, manufacturing and industrial systems, computer networks, education, energy, production planning and control, financial models, behavioral models, information systems, and inventory control.

Natural language query system design for interactive information storage and retrieval systems. Presentation visuals. M.S. Thesis Final Report, 1 Jul. 1985 - 31 Dec. 1987

NASA Technical Reports Server (NTRS)

Dominick, Wayne D. (Editor); Liu, I-Hsiung

1985-01-01

This Working Paper Series entry represents a collection of presentation visuals associated with the companion report entitled Natural Language Query System Design for Interactive Information Storage and Retrieval Systems, USL/DBMS NASA/RECON Working Paper Series report number DBMS.NASA/RECON-17.

Measures of effectiveness:an annotated bibliography.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Campbell, Philip LaRoche

The purpose of this report is to provide guidance, from the open literature, on developing a set of ''measures of effectiveness'' (MoEs) and using them to evaluate a system. Approximately twenty papers and books are reviewed. The papers that provide the clearest understanding of MoEs are identified (Sproles [46], [48], [50]). The seminal work on value-focused thinking (VFT), an approach that bridges the gap between MoEs and a system, is also identified (Keeney [25]). And finally three examples of the use of VFT in evaluating a system based on MoEs are identified (Jackson et al. [21], Kerchner & Deckro [27],more » and Doyle et al. [14]). Notes are provided of the papers and books to pursue in order to take this study to the next level of detail.« less

Formal implementation of a performance evaluation model for the face recognition system.

PubMed

Shin, Yong-Nyuo; Kim, Jason; Lee, Yong-Jun; Shin, Woochang; Choi, Jin-Young

2008-01-01

Due to usability features, practical applications, and its lack of intrusiveness, face recognition technology, based on information, derived from individuals' facial features, has been attracting considerable attention recently. Reported recognition rates of commercialized face recognition systems cannot be admitted as official recognition rates, as they are based on assumptions that are beneficial to the specific system and face database. Therefore, performance evaluation methods and tools are necessary to objectively measure the accuracy and performance of any face recognition system. In this paper, we propose and formalize a performance evaluation model for the biometric recognition system, implementing an evaluation tool for face recognition systems based on the proposed model. Furthermore, we performed evaluations objectively by providing guidelines for the design and implementation of a performance evaluation system, formalizing the performance test process.

Development of a novel optimization tool for electron linacs inspired by artificial intelligence techniques in video games

NASA Astrophysics Data System (ADS)

Meier, E.; Biedron, S. G.; LeBlanc, G.; Morgan, M. J.

2011-03-01

This paper reports the results of an advanced algorithm for the optimization of electron beam parameters in Free Electron Laser (FEL) Linacs. In the novel approach presented in this paper, the system uses state of the art developments in video games to mimic an operator's decisions to perform an optimization task when no prior knowledge, other than constraints on the actuators is available. The system was tested for the simultaneous optimization of the energy spread and the transmission of the Australian Synchrotron Linac. The proposed system successfully increased the transmission of the machine from 90% to 97% and decreased the energy spread of the beam from 1.04% to 0.91%. Results of a control experiment performed at the new FERMI@Elettra FEL is also reported, suggesting the adaptability of the scheme for beam-based control.

Development and Evaluation of a Diagnostic Documentation Support System using Knowledge Processing

NASA Astrophysics Data System (ADS)

Makino, Kyoko; Hayakawa, Rumi; Terai, Koichi; Fukatsu, Hiroshi

In this paper, we will introduce a system which supports creating diagnostic reports. Diagnostic reports are documents by doctors of radiology describing the existence and nonexistence of abnormalities from the inspection images, such as CT and MRI, and summarize a patient's state and disease. Our system indicates insufficiencies in these reports created by younger doctors, by using knowledge processing based on a medical knowledge dictionary. These indications are not only clerical errors, but the system also analyzes the purpose of the inspection and determines whether a comparison with a former inspection is required, or whether there is any shortage in description. We verified our system by using actual data of 2,233 report pairs, a pair comprised of a report written by a younger doctor and a check result of the report by an experienced doctor. The results of the verification showed that the rules of string analysis for detecting clerical errors and sentence wordiness obtained a recall of over 90% and a precision of over 75%. Moreover, the rules based on a medical knowledge dictionary for detecting the lack of required comparison with a former inspection and the shortage in description for the inspection purpose obtained a recall of over 70%. From these results, we confirmed that our system contributes to the quality improvement of diagnostic reports. We expect that our system can comprehensively support diagnostic documentations by cooperating with the interface which refers to inspection images or past reports.

Celss nutrition system utilizing snails

NASA Astrophysics Data System (ADS)

Midorikawa, Y.; Fujii, T.; Ohira, A.; Nitta, K.

At the 40th IAF Congress in Malaga, a nutrition system for a lunar base CELSS was presented. A lunar base with a total of eight crew members was envisaged. In this paper, four species of plants—rice, soybean, lettuce and strawberry—were introduced to the system. These plants were sufficient to satisfy fundamental nutritional needs of the crew members. The supply of nutrition from plants and the human nutritional requirements could almost be balanced. Our study revealed that the necessary plant cultivation area per crew member would be nearly 40 m 3 in the lunar base. The sources of nutrition considered in the study were energy, sugar, fat, amino acids, inorganic salt and vitamins; however, calcium, vitamin B 2, vitamin A and sodium were found to be lacking. Therefore, a subsystem to supply these elements is of considerable value. In this paper, we report on a study for breeding snails and utilizing meat as food. Nutrients supplied from snails are shown to compensate for the abovementioned lacking elements. We evaluate the snail breeder and the associated food supply system as a subsystem of closed ecological life support system.

Computerized Clinical Decision Support: Contributions from 2015

PubMed Central

Bouaud, J.

2016-01-01

Summary Objective To summarize recent research and select the best papers published in 2015 in the field of computerized clinical decision support for the Decision Support section of the IMIA yearbook. Method A literature review was performed by searching two bibliographic databases for papers related to clinical decision support systems (CDSSs) and computerized provider order entry (CPOE) systems. The aim was to identify a list of candidate best papers from the retrieved papers that were then peer-reviewed by external reviewers. A consensus meeting between the two section editors and the IMIA editorial team was finally conducted to conclude in the best paper selection. Results Among the 974 retrieved papers, the entire review process resulted in the selection of four best papers. One paper reports on a CDSS routinely applied in pediatrics for more than 10 years, relying on adaptations of the Arden Syntax. Another paper assessed the acceptability and feasibility of an important CPOE evaluation tool in hospitals outside the US where it was developed. The third paper is a systematic, qualitative review, concerning usability flaws of medication-related alerting functions, providing an important evidence-based, methodological contribution in the domain of CDSS design and development in general. Lastly, the fourth paper describes a study quantifying the effect of a complex, continuous-care, guideline-based CDSS on the correctness and completeness of clinicians’ decisions. Conclusions While there are notable examples of routinely used decision support systems, this 2015 review on CDSSs and CPOE systems still shows that, despite methodological contributions, theoretical frameworks, and prototype developments, these technologies are not yet widely spread (at least with their full functionalities) in routine clinical practice. Further research, testing, evaluation, and training are still needed for these tools to be adopted in clinical practice and, ultimately, illustrate the benefits that they promise. PMID:27830247

3D sensors and micro-fabricated detector systems

NASA Astrophysics Data System (ADS)

Da Vià, Cinzia

2014-11-01

Micro-systems based on the Micro Electro Mechanical Systems (MEMS) technology have been used in miniaturized low power and low mass smart structures in medicine, biology and space applications. Recently similar features found their way inside high energy physics with applications in vertex detectors for high-luminosity LHC Upgrades, with 3D sensors, 3D integration and efficient power management using silicon micro-channel cooling. This paper reports on the state of this development.

[Introduction and some problems of the rapid time series laboratory reporting system].

PubMed

Kanao, M; Yamashita, K; Kuwajima, M

1999-09-01

We introduced an on-line system of biochemical, hematological, serological, urinary, bacteriological, and emergency examinations and associated office work using a client server system NEC PC-LACS based on a system consisting of concentration of outpatient blood collection, concentration of outpatient reception, and outpatient examination by reservation. Using this on-line system, results of 71 items in chemical serological, hematological, and urinary examinations are rapidly reported within 1 hour. Since the ordering system at our hospital has not been completed yet, we constructed a rapid time series reporting system in which time series data obtained on 5 serial occasions are printed on 2 sheets of A4 paper at the time of the final report. In each consultation room of the medical outpatient clinic, at the neuromedical outpatient clinic, and at the kidney center where examinations are frequently performed, terminal equipment and a printer for inquiry were established for real-time output of time series reports. Results are reported by FAX to the other outpatient clinics and wards, and subsequently, time series reports are output at the clinical laboratory department. This system allowed rapid examination, especially preconsultation examination. This system was also useful for reducing office work and effectively utilize examination data.

Implementing and integrating a clinically driven electronic medical record for radiation oncology in a large medical enterprise.

PubMed

Kirkpatrick, John P; Light, Kim L; Walker, Robyn M; Georgas, Debra L; Antoine, Phillip A; Clough, Robert W; Cozart, Heidi B; Yin, Fang-Fang; Yoo, Sua; Willett, Christopher G

2013-01-01

While our department is heavily invested in computer-based treatment planning, we historically relied on paper-based charts for management of Radiation Oncology patients. In early 2009, we initiated the process of conversion to an electronic medical record (EMR) eliminating the need for paper charts. Key goals included the ability to readily access information wherever and whenever needed, without compromising safety, treatment quality, confidentiality, or productivity. In February, 2009, we formed a multi-disciplinary team of Radiation Oncology physicians, nurses, therapists, administrators, physicists/dosimetrists, and information technology (IT) specialists, along with staff from the Duke Health System IT department. The team identified all existing processes and associated information/reports, established the framework for the EMR system and generated, tested and implemented specific EMR processes. Two broad classes of information were identified: information which must be readily accessed by anyone in the health system versus that used solely within the Radiation Oncology department. Examples of the former are consultation reports, weekly treatment check notes, and treatment summaries; the latter includes treatment plans, daily therapy records, and quality assurance reports. To manage the former, we utilized the enterprise-wide system, which required an intensive effort to design and implement procedures to export information from Radiation Oncology into that system. To manage "Radiation Oncology" data, we used our existing system (ARIA, Varian Medical Systems.) The ability to access both systems simultaneously from a single workstation (WS) was essential, requiring new WS and modified software. As of January, 2010, all new treatments were managed solely with an EMR. We find that an EMR makes information more widely accessible and does not compromise patient safety, treatment quality, or confidentiality. However, compared to paper charts, time required by clinicians to access/enter patient information has substantially increased. While productivity is improving with experience, substantial growth will require better integration of the system components, decreased access times, and improved user interfaces. $127K was spent on new hardware and software; elimination of paper yields projected savings of $21K/year. One year after conversion to an EMR, more than 90% of department staff favored the EMR over the previous paper charts. Successful implementation of a Radiation Oncology EMR required not only the effort and commitment of all functions of the department, but support from senior health system management, corporate IT, and vendors. Realization of the full benefits of an EMR will require experience, faster/better integrated software, and continual improvement in underlying clinical processes.

Aqueous gating of van der Waals materials on bilayer nanopaper.

PubMed

Bao, Wenzhong; Fang, Zhiqiang; Wan, Jiayu; Dai, Jiaqi; Zhu, Hongli; Han, Xiaogang; Yang, Xiaofeng; Preston, Colin; Hu, Liangbing

2014-10-28

In this work, we report transistors made of van der Waals materials on a mesoporous paper with a smooth nanoscale surface. The aqueous transistor has a novel planar structure with source, drain, and gate electrodes on the same surface of the paper, while the mesoporous paper is used as an electrolyte reservoir. These transistors are enabled by an all-cellulose paper with nanofibrillated cellulose (NFC) on the top surface that leads to an excellent surface smoothness, while the rest of the microsized cellulose fibers can absorb electrolyte effectively. Based on two-dimensional van der Waals materials, including MoS2 and graphene, we demonstrate high-performance transistors with a large on-off ratio and low subthreshold swing. Such planar transistors with absorbed electrolyte gating can be used as sensors integrated with other components to form paper microfluidic systems. This study is significant for future paper-based electronics and biosensors.

A Paper-Based Electrochromic Array for Visualized Electrochemical Sensing.

PubMed

Zhang, Fengling; Cai, Tianyi; Ma, Liang; Zhan, Liyuan; Liu, Hong

2017-01-31

We report a battery-powered, paper-based electrochromic array for visualized electrochemical sensing. The paper-based sensing system consists of six parallel electrochemical cells, which are powered by an aluminum-air battery. Each single electrochemical cell uses a Prussian Blue spot electrodeposited on an indium-doped tin oxide thin film as the electrochromic indicator. Each electrochemical cell is preloaded with increasing amounts of analyte. The sample activates the battery for the sensing. Both the preloaded analyte and the analyte in the sample initiate the color change of Prussian Blue to Prussian White. With a reaction time of 60 s, the number of electrochemical cells with complete color changes is correlated to the concentration of analyte in the sample. As a proof-of-concept analyte, lactic acid was detected semi-quantitatively using the naked eye.

Website design: technical, social and medical issues for self-reporting by elderly patients.

PubMed

Taylor, Mark J; Stables, Rod; Matata, Bashir; Lisboa, Paulo J G; Laws, Andy; Almond, Peter

2014-06-01

There is growing interest in the use of the Internet for interacting with patients, both in terms of healthcare information provision and information gathering. In this article, we examine the issues in designing healthcare websites for elderly users. In particular, this article uses a year-long case study of the development of a web-based system for self-reporting of symptoms and quality of life with a view to examine the issues relating to website design for elderly users. The issues identified included the technical, social and medical aspects of website design for elderly users. The web-based system developed was based on the European Quality of Life 5-Dimensions health-status questionnaire, a commonly used tool for patient self-reporting of quality of life, and the more specific coronary revascularisation outcome questionnaire. Currently, self-reporting is generally administered in the form of paper-based questionnaires to be completed in the outpatient clinic or at home. There are a variety of issues relating to elderly users, which imply that websites for elderly patients may involve different design considerations to other types of websites.

Manned Mars missions: A working group report

NASA Technical Reports Server (NTRS)

Duke, Michael B. (Editor); Keaton, Paul W. (Editor)

1986-01-01

The discussions of the Working Group (based in large part on working papers, which will shortly be published separately) are summarized. These papers cover a broad range of subjects which need to be addressed in the formulation of such a formidable enterprise as a manned Mars program. Science objective and operations; Mars surface infrastructure and activities; mission and system concepts and configurations; life sciences; impacts on the space infrastructure; and costs, schedules, and organizations are addressed.

A vibration-based health monitoring program for a large and seismically vulnerable masonry dome

NASA Astrophysics Data System (ADS)

Pecorelli, M. L.; Ceravolo, R.; De Lucia, G.; Epicoco, R.

2017-05-01

Vibration-based health monitoring of monumental structures must rely on efficient and, as far as possible, automatic modal analysis procedures. Relatively low excitation energy provided by traffic, wind and other sources is usually sufficient to detect structural changes, as those produced by earthquakes and extreme events. Above all, in-operation modal analysis is a non-invasive diagnostic technique that can support optimal strategies for the preservation of architectural heritage, especially if complemented by model-driven procedures. In this paper, the preliminary steps towards a fully automated vibration-based monitoring of the world’s largest masonry oval dome (internal axes of 37.23 by 24.89 m) are presented. More specifically, the paper reports on signal treatment operations conducted to set up the permanent dynamic monitoring system of the dome and to realise a robust automatic identification procedure. Preliminary considerations on the effects of temperature on dynamic parameters are finally reported.

Receiver design, performance analysis, and evaluation for space-borne laser altimeters and space-to-space laser ranging systems

NASA Technical Reports Server (NTRS)

Davidson, Frederic M.; Sun, Xiaoli; Field, Christopher T.

1995-01-01

This Interim report consists of a manuscript, 'Receiver Design for Satellite to Satellite Laser Ranging Instrument,' and copies of two papers we co-authored, 'Demonstration of High Sensitivity Laser Ranging System' and 'Semiconductor Laser-Based Ranging Instrument for Earth Gravity Measurements. ' These two papers were presented at the conference Semiconductor Lasers, Advanced Devices and Applications, August 21 -23, 1995, Keystone Colorado. The manuscript is a draft in the preparation for publication, which summarizes the theory we developed on space-borne laser ranging instrument for gravity measurements.

Constructing Model of Relationship among Behaviors and Injuries to Products Based on Large Scale Text Data on Injuries

NASA Astrophysics Data System (ADS)

Nomori, Koji; Kitamura, Koji; Motomura, Yoichi; Nishida, Yoshifumi; Yamanaka, Tatsuhiro; Komatsubara, Akinori

In Japan, childhood injury prevention is urgent issue. Safety measures through creating knowledge of injury data are essential for preventing childhood injuries. Especially the injury prevention approach by product modification is very important. The risk assessment is one of the most fundamental methods to design safety products. The conventional risk assessment has been carried out subjectively because product makers have poor data on injuries. This paper deals with evidence-based risk assessment, in which artificial intelligence technologies are strongly needed. This paper describes a new method of foreseeing usage of products, which is the first step of the evidence-based risk assessment, and presents a retrieval system of injury data. The system enables a product designer to foresee how children use a product and which types of injuries occur due to the product in daily environment. The developed system consists of large scale injury data, text mining technology and probabilistic modeling technology. Large scale text data on childhood injuries was collected from medical institutions by an injury surveillance system. Types of behaviors to a product were derived from the injury text data using text mining technology. The relationship among products, types of behaviors, types of injuries and characteristics of children was modeled by Bayesian Network. The fundamental functions of the developed system and examples of new findings obtained by the system are reported in this paper.

Using computer software to improve group decision-making.

PubMed

Mockler, R J; Dologite, D G

1991-08-01

This article provides a review of some of the work done in the area of knowledge-based systems for strategic planning. Since 1985, with the founding of the Center for Knowledge-based Systems for Business Management, the project has focused on developing knowledge-based systems (KBS) based on these models. In addition, the project also involves developing a variety of computer and non-computer methods and techniques for assisting both technical and non-technical managers and individuals to do decision modelling and KBS development. This paper presents a summary of one segment of the project: a description of integrative groupware useful in strategic planning. The work described here is part of an ongoing research project. As part of this project, for example, over 200 non-technical and technical business managers, most of them working full-time during the project, developed over 160 KBS prototype systems in conjunction with MBA course in strategic planning and management decision making. Based on replies to a survey of this test group, 28 per cent of the survey respondents reported their KBS were used at work, 21 per cent reportedly received promotions, pay rises or new jobs based on their KBS development work, and 12 per cent reported their work led to participation in other KBS development projects at work. All but two of the survey respondents reported that their work on the KBS development project led to a substantial increase in their job knowledge or performance.

Learning to Teach Online: Promoting Success through Professional Development

ERIC Educational Resources Information Center

Hinson, Janice M.; LaPrairie, Kimberely N.

2005-01-01

The study reported in this paper examined the types of professional-development activities, support systems, and organizational structures necessary for community college faculty to make transitions from traditional teaching to Web-based teaching. Results indicate that (a) instructional change can by initiated through sustained professional…

A review of the design and clinical evaluation of the ShefStim array-based functional electrical stimulation system.

PubMed

Kenney, Laurence P; Heller, Ben W; Barker, Anthony T; Reeves, Mark L; Healey, Jamie; Good, Timothy R; Cooper, Glen; Sha, Ning; Prenton, Sarah; Liu, Anmin; Howard, David

2016-11-01

Functional electrical stimulation has been shown to be a safe and effective means of correcting foot drop of central neurological origin. Current surface-based devices typically consist of a single channel stimulator, a sensor for determining gait phase and a cuff, within which is housed the anode and cathode. The cuff-mounted electrode design reduces the likelihood of large errors in electrode placement, but the user is still fully responsible for selecting the correct stimulation level each time the system is donned. Researchers have investigated different approaches to automating aspects of setup and/or use, including recent promising work based on iterative learning techniques. This paper reports on the design and clinical evaluation of an electrode array-based FES system for the correction of drop foot, ShefStim. The paper reviews the design process from proof of concept lab-based study, through modelling of the array geometry and interface layer to array search algorithm development. Finally, the paper summarises two clinical studies involving patients with drop foot. The results suggest that the ShefStim system with automated setup produces results which are comparable with clinician setup of conventional systems. Further, the final study demonstrated that patients can use the system without clinical supervision. When used unsupervised, setup time was 14min (9min for automated search plus 5min for donning the equipment), although this figure could be reduced significantly with relatively minor changes to the design. Copyright © 2016 IPEM. Published by Elsevier Ltd. All rights reserved.

An observation tool to study air traffic control and flightdeck collaboration.

PubMed

Cox, Gemma; Sharples, Sarah; Stedmon, Alex; Wilson, John

2007-07-01

The complex systems of the flightdeck (FD) and the Air Traffic Control Centre (ATC) are characterised by numerous concurrently operating and interacting communication channels between people and between people and machines/computer systems. This paper describes work in support of investigating the impact of changes to technologies and responsibilities within this system with respect to human factors. It focuses primarily on the introduction of datalink (text-based communication rather than traditional radio communication) and the move towards freeflight (pilot-mediated air traffic control). Air traffic management investigations have outlined these specific changes as strategies to enable further increases in the volume of air traffic. A systems approach was taken and field studies were conducted. Small numbers of domain experts such as air traffic controllers (ATCOs) were involved in the field-based observations of how people interact with systems and each other. This paper summarises the overall research approach taken and then specifically reports on the field-based observations including the justification, development, and findings of the observation tool used. The observation tool examined information propagation through the air traffic control-flightdeck (ATC-FD) system, and resulted in models of possible information trajectories through the system.

Note: A resonating reflector-based optical system for motion measurement in micro-cantilever arrays

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sathishkumar, P.; Punyabrahma, P.; Sri Muthu Mrinalini, R.

A robust, compact optical measurement unit for motion measurement in micro-cantilever arrays enables development of portable micro-cantilever sensors. This paper reports on an optical beam deflection-based system to measure the deflection of micro-cantilevers in an array that employs a single laser source, a single detector, and a resonating reflector to scan the measurement laser across the array. A strategy is also proposed to extract the deflection of individual cantilevers from the acquired data. The proposed system and measurement strategy are experimentally evaluated and demonstrated to measure motion of multiple cantilevers in an array.

Intelligent Data Analysis in the EMERCOM Information System

NASA Astrophysics Data System (ADS)

Elena, Sharafutdinova; Tatiana, Avdeenko; Bakaev, Maxim

2017-01-01

The paper describes an information system development project for the Russian Ministry of Emergency Situations (MES, whose international operations body is known as EMERCOM), which was attended by the representatives of both the IT industry and the academia. Besides the general description of the system, we put forward OLAP and Data Mining-based approaches towards the intelligent analysis of the data accumulated in the database. In particular, some operational OLAP reports and an example of multi-dimensional information space based on OLAP Data Warehouse are presented. Finally, we outline Data Mining application to support decision-making regarding security inspections planning and results consideration.

The Use of an Online Learning and Teaching System for Monitoring Computer Aided Design Student Participation and Predicting Student Success

ERIC Educational Resources Information Center

Akhtar, S.; Warburton, S.; Xu, W.

2017-01-01

In this paper we report on the use of a purpose built Computer Support Collaborative learning environment designed to support lab-based CAD teaching through the monitoring of student participation and identified predictors of success. This was carried out by analysing data from the interactive learning system and correlating student behaviour with…

Design and realization of the compound text-based test questions library management system

NASA Astrophysics Data System (ADS)

Shi, Lei; Feng, Lin; Zhao, Xin

2011-12-01

The test questions library management system is the essential part of the on-line examination system. The basic demand for which is to deal with compound text including information like images, formulae and create the corresponding Word documents. Having compared with the two current solutions of creating documents, this paper presents a design proposal of Word Automation mechanism based on OLE/COM technology, and discusses the way of Word Automation application in detail and at last provides the operating results of the system which have high reference value in improving the generated efficiency of project documents and report forms.

High speed, high performance, portable, dual-channel, optical fiber Bragg grating (FBG) demodulator

NASA Astrophysics Data System (ADS)

Zhang, Hongtao; Wei, Zhanxiong; Fan, Lingling; Wang, Pengfei; Zhao, Xilin; Wang, Zhenhua; Yang, Shangming; Cui, Hong-Liang

2009-10-01

A high speed, high performance, portable, dual-channel, optical Fiber Bragg Grating demodulator based on fiber Fabry- Pérot tunable filter (FFP-FT) is reported in this paper. The high speed demodulation can be achieved to detect the dynamical loads of vehicles with speed of 15 mph. However, the drifts of piezoelectric transducer (PZT) in the cavity of FFP-FT dramatically degrade the stability of system. Two schemes are implemented to improve the stability of system. Firstly, a temperature control system is installed to effectively remove the thermal drifts of PZT. Secondly, a scheme of changing the bias voltage of FFP-FT to restrain non-thermal drifts has been realized at lab and will be further developed to an automatic control system based on microcontroller. Although this demodulator is originally used in Weight-In- Motion (WIM) sensing system, it can be extended into other aspects and the schemes presented in this paper will be useful in many applications.

Electronic clinical safety reporting system: a benefits evaluation.

PubMed

Elliott, Pamela; Martin, Desmond; Neville, Doreen

2014-06-11

Eastern Health, a large health care organization in Newfoundland and Labrador (NL), started a staged implementation of an electronic occurrence reporting system (used interchangeably with "clinical safety reporting system") in 2008, completing Phase One in 2009. The electronic clinical safety reporting system (CSRS) was designed to replace a paper-based system. The CSRS involves reporting on occurrences such as falls, safety/security issues, medication errors, treatment and procedural mishaps, medical equipment malfunctions, and close calls. The electronic system was purchased from a vendor in the United Kingdom that had implemented the system in the United Kingdom and other places, such as British Columbia. The main objective of the new system was to improve the reporting process with the goal of improving clinical safety. The project was funded jointly by Eastern Health and Canada Health Infoway. The objectives of the evaluation were to: (1) assess the CSRS on achieving its stated objectives (particularly, the benefits realized and lessons learned), and (2) identify contributions, if any, that can be made to the emerging field of electronic clinical safety reporting. The evaluation involved mixed methods, including extensive stakeholder participation, pre/post comparative study design, and triangulation of data where possible. The data were collected from several sources, such as project documentation, occurrence reporting records, stakeholder workshops, surveys, focus groups, and key informant interviews. The findings provided evidence that frontline staff and managers support the CSRS, identifying both benefits and areas for improvement. Many benefits were realized, such as increases in the number of occurrences reported, in occurrences reported within 48 hours, in occurrences reported by staff other than registered nurses, in close calls reported, and improved timelines for notification. There was also user satisfaction with the tool regarding ease of use, accessibility, and consistency. The implementation process encountered challenges related to customizing the software and the development of the classification system for coding occurrences. This impacted on the ability of the managers to close-out files in a timely fashion. The issues that were identified, and suggestions for improvements to the form itself, were shared with the Project Team as soon as they were noted. Changes were made to the system before the rollout. There were many benefits realized from the new system that can contribute to improved clinical safety. The participants preferred the electronic system over the paper-based system. The lessons learned during the implementation process resulted in recommendations that informed the rollout of the system in Eastern Health, and in other health care organizations in the province of Newfoundland and Labrador. This study also informed the evaluation of other health organizations in the province, which was completed in 2013.

Development and implementation of an HSE management system in E and P companies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bentley, P.D.; Mundhenk, D.L.; Jones, M.G.

1995-01-01

This paper describes the experience to date with safety management systems (SMS's) and describes their implementation after the Piper Alpha disaster and Lord Cullen's report. It also shows the gradual expansion of these systems toward fully integrated health, safety, and environment (HSE) management systems. The authors' company policy, which was clearly stated before publication of Lord Cullen's report, is that work should not start until the appropriate controls are in place. Work based on this policy and on objective-setting SMS's within Shell Intl. Petroleum Mij. (SIPM) E and P coordination started in earnest soon after the publication of the reportmore » in Nov. 1990 and has continued without interruption since that time. Objective-setting systems may be defined as systems where the company management sets its own objectives or goals on the basis of functional rather than prescriptive requirements and then goes on to demonstrate how such goals have been, or are being, met. The paper ends with a projection of what may be expected in the future.« less

Global Practices of Interprofessional Education (IPE) and Relevant International Activities.

PubMed

Arakawa, Naoko

2017-01-01

Activities related to interprofessional education (IPE) vary between countries according to local and national health needs and systems. The International Pharmaceutical Federation (FIP) Education Initiative endeavors to provide a global vision in IPE by the sharing of experiences and gathering of evidence collaboratively to facilitate country-level initiatives. The purpose of this paper is to contribute to the further development of IPE activities in pharmacy in Japan through sharing global perspectives and activities related to IPE. FIP Education Initiative published the Interprofessional Education in a Pharmacy Context: Global Report in September 2015, which marked a milestone in the growing recognition of IPE in pharmacy globally. The paper shared global and regional perspectives and experiences in IPE in pharmacy, both from the report and FIP activities. This paper can be seen as a snapshot of IPE-related international activities, which enables gaps and challenges in implementing IPE activities in Japan to be identified. This paper provides an opportunity to explore global trends and initiatives regarding IPE, and to consider how to form and implement IPE specifically based on Japanese health needs and systems.

Computational methods and software systems for dynamics and control of large space structures

NASA Technical Reports Server (NTRS)

Park, K. C.; Felippa, C. A.; Farhat, C.; Pramono, E.

1990-01-01

This final report on computational methods and software systems for dynamics and control of large space structures covers progress to date, projected developments in the final months of the grant, and conclusions. Pertinent reports and papers that have not appeared in scientific journals (or have not yet appeared in final form) are enclosed. The grant has supported research in two key areas of crucial importance to the computer-based simulation of large space structure. The first area involves multibody dynamics (MBD) of flexible space structures, with applications directed to deployment, construction, and maneuvering. The second area deals with advanced software systems, with emphasis on parallel processing. The latest research thrust in the second area, as reported here, involves massively parallel computers.

[Information technology for the management of health care data: the EPIweb project].

PubMed

Vittorini, Pierpaolo; Necozione, Stefano; di Orio, Ferdinando

2005-01-01

In the US, the Center for Disease Control and Prevention has produced has increased the permeability of the computer science technologies, in order to achieve a better and more efficient management of health care data. In this context, the present paper proposes a discussion regarding a web-based information system, called EPIweb. This system allows researchers to select the centers for the data entry, collect and elaborate health care data, produce technical reports and discuss results. Such a system aims to be easy-to-use, totally configurable and particularly suitable for the management of multicenter studies. The paper shows the EPIweb features, proposes a sample system run, and concludes with a discussion regarding both the advantages and the possible improvements and extensions.

U.S. Geological Survey Subsidence Interest Group Conference; proceedings of the Technical Meeting, Las Vegas, Nevada, February 14-16, 1995

USGS Publications Warehouse

Prince, Keith R.; Leake, Stanley A.

1997-01-01

Introducation to Papers: This report is a compilation of short papers that are based on oral presentations summarizing the results of recent research that were given at the third meeting of the Subsidence Interest Group held in Las Vegas, Nevada, February 14?16, 1995. The report includes case studies of land subsidence and aquifer-system deformation resulting from fluid withdrawal, geothermal development, and mine collapse. Methods for monitoring land subsidence using Global Positioning System technology for the rapid and accurate measurement of changes in land-surface altitude also are described. The current status of numerical simulation of land subsidence in the USGS is summarized, and several of the short papers deal with the development and application of new numerical techniques for simulation and quantification of aquifersystem deformation. Not all oral presentations made at the meeting are documented in this report. Several of the presentations were of ongoing research and as such, the findings were provisional in nature and were offered at the meeting to stimulate scientific discussion and debate among colleagues. The information presented in this report, although only a subset of the proceedings of the meeting in Las Vegas, should help expand the scientific basis for management decisions to mitigate or control the effects of land subsidence. The short papers describing the results of these studies provide a cross section of ongoing research in aquifer mechanics and land subsidence and also form an assessment of the current technology and 'state of the science.' The analytical and interpretive methods described in this report will be useful to scientists involved in studies of ground-water hydraulics and aquifer-system deformation.

Automation Improvements for Synchrotron Based Small Angle Scattering Using an Inexpensive Robotics Platform

DOE Office of Scientific and Technical Information (OSTI.GOV)

Quintana, John P.

This paper reports on the progress toward creating semi-autonomous motion control platforms for beamline applications using the iRobot Create registered platform. The goal is to create beamline research instrumentation where the motion paths are based on the local environment rather than position commanded from a control system, have low integration costs and also be scalable and easily maintainable.

Evaluation of Embedded System Component Utilized in Delivery Integrated Design Project Course

NASA Astrophysics Data System (ADS)

Junid, Syed Abdul Mutalib Al; Hussaini, Yusnira; Nazmie Osman, Fairul; Razak, Abdul Hadi Abdul; Idros, Mohd Faizul Md; Karimi Halim, Abdul

2018-03-01

This paper reports the evaluation of the embedded system component utilized in delivering the integrated electronic engineering design project course. The evaluation is conducted based on the report project submitted as to fulfil the assessment criteria for the integrated electronic engineering design project course named; engineering system design. Six projects were assessed in this evaluation. The evaluation covers the type of controller, programming language and the number of embedded component utilization as well. From the evaluation, the C-programming based language is the best solution preferred by the students which provide them flexibility in the programming. Moreover, the Analog to Digital converter is intensively used in the projects which include sensors in their proposed design. As a conclusion, in delivering the integrated design project course, the knowledge over the embedded system solution is very important since the high density of the knowledge acquired in accomplishing the project assigned.

Information Extraction for System-Software Safety Analysis: Calendar Year 2007 Year-End Report

NASA Technical Reports Server (NTRS)

Malin, Jane T.

2008-01-01

This annual report describes work to integrate a set of tools to support early model-based analysis of failures and hazards due to system-software interactions. The tools perform and assist analysts in the following tasks: 1) extract model parts from text for architecture and safety/hazard models; 2) combine the parts with library information to develop the models for visualization and analysis; 3) perform graph analysis on the models to identify possible paths from hazard sources to vulnerable entities and functions, in nominal and anomalous system-software configurations; 4) perform discrete-time-based simulation on the models to investigate scenarios where these paths may play a role in failures and mishaps; and 5) identify resulting candidate scenarios for software integration testing. This paper describes new challenges in a NASA abort system case, and enhancements made to develop the integrated tool set.

Development of eHOME, a Mobile Instrument for Reporting, Monitoring, and Consulting Drug-Related Problems in Home Care: Human-Centered Design Study

PubMed Central

Sino, Carolina Geertruida Maria; Heerdink, Eibert Rob; Schuurmans, Marieke Joanna

2018-01-01

Background Home care patients often use many medications and are prone to drug-related problems (DRPs). For the management of problems related to drug use, home care could add to the multidisciplinary expertise of general practitioners (GPs) and pharmacists. The home care observation of medication-related problems by home care employees (HOME)-instrument is paper-based and assists home care workers in reporting potential DRPs. To facilitate the multiprofessional consultation, a digital report of DRPs from the HOME-instrument and digital monitoring and consulting of DRPs between home care and general practices and pharmacies is desired. Objective The objective of this study was to develop an electronic HOME system (eHOME), a mobile version of the HOME-instrument that includes a monitoring and a consulting system for primary care. Methods The development phase of the Medical Research Council (MRC) framework was followed in which an iterative human-centered design (HCD) approach was applied. The approach involved a Delphi round for the context of use and user requirements analysis of the digital HOME-instrument and the monitoring and consulting system followed by 2 series of pilots for testing the usability and redesign. Results By using an iterative design approach and by involving home care workers, GPs, and pharmacists throughout the process as informants, design partners, and testers, important aspects that were crucial for system realization and user acceptance were revealed. Through the report webpage interface, which includes the adjusted content of the HOME-instrument and added home care practice–based problems, home care workers can digitally report observed DRPs. Furthermore, it was found that the monitoring and consulting webpage interfaces enable digital consultation between home care and general practices and pharmacies. The webpages were considered convenient, clear, easy, and usable. Conclusions By employing an HCD approach, the eHOME-instrument was found to be an easy-to-use system. The systematic approach promises a valuable contribution for the future development of digital mobile systems of paper-based tools. PMID:29514771

Development of eHOME, a Mobile Instrument for Reporting, Monitoring, and Consulting Drug-Related Problems in Home Care: Human-Centered Design Study.

PubMed

Dijkstra, Nienke Elske; Sino, Carolina Geertruida Maria; Heerdink, Eibert Rob; Schuurmans, Marieke Joanna

2018-03-07

Home care patients often use many medications and are prone to drug-related problems (DRPs). For the management of problems related to drug use, home care could add to the multidisciplinary expertise of general practitioners (GPs) and pharmacists. The home care observation of medication-related problems by home care employees (HOME)-instrument is paper-based and assists home care workers in reporting potential DRPs. To facilitate the multiprofessional consultation, a digital report of DRPs from the HOME-instrument and digital monitoring and consulting of DRPs between home care and general practices and pharmacies is desired. The objective of this study was to develop an electronic HOME system (eHOME), a mobile version of the HOME-instrument that includes a monitoring and a consulting system for primary care. The development phase of the Medical Research Council (MRC) framework was followed in which an iterative human-centered design (HCD) approach was applied. The approach involved a Delphi round for the context of use and user requirements analysis of the digital HOME-instrument and the monitoring and consulting system followed by 2 series of pilots for testing the usability and redesign. By using an iterative design approach and by involving home care workers, GPs, and pharmacists throughout the process as informants, design partners, and testers, important aspects that were crucial for system realization and user acceptance were revealed. Through the report webpage interface, which includes the adjusted content of the HOME-instrument and added home care practice-based problems, home care workers can digitally report observed DRPs. Furthermore, it was found that the monitoring and consulting webpage interfaces enable digital consultation between home care and general practices and pharmacies. The webpages were considered convenient, clear, easy, and usable. By employing an HCD approach, the eHOME-instrument was found to be an easy-to-use system. The systematic approach promises a valuable contribution for the future development of digital mobile systems of paper-based tools. ©Nienke Elske Dijkstra, Carolina Geertruida Maria Sino, Eibert Rob Heerdink, Marieke Joanna Schuurmans. Originally published in JMIR Human Factors (http://humanfactors.jmir.org), 07.03.2018.

Information and communication technology for managing pain in palliative care: a review of the literature.

PubMed

Allsop, Matthew J; Taylor, Sally; Mulvey, Matthew R; Bennett, Michael I; Bewick, Bridgette M

2015-12-01

Information and communication technology (ICT) systems are being developed for electronic symptom reporting across different stages of the cancer trajectory with research in palliative care at an early stage. This paper presents the first systematic search of the literature to review existing ICT systems intended to support management of pain in palliative care patients with cancer. The review was conducted according to Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines for systematic reviews and meta-analyses. Four databases (Embase, MEDLINE, PsycINFO and Healthcare Management Information Consortium) from 1990 to December 2012 were searched, with exclusion of papers based on their description of ICT systems and language used. 24 articles met the inclusion criteria, many of which reported the use of non-experimental research designs. Studies were identified at different stages of development with no systems having reached implementation. Most systems captured pain as part of quality-of-life measurement with wide variation in approaches to pain assessment. ICT systems for symptom reporting are emerging in the palliative care context. Future development of ICT systems need to increase the quality and scale of development work, consider how recommendations for pain measurement can be integrated and explore how to effectively use system feedback with patients. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Computerized provider order entry in the clinical laboratory

PubMed Central

Baron, Jason M.; Dighe, Anand S.

2011-01-01

Clinicians have traditionally ordered laboratory tests using paper-based orders and requisitions. However, paper orders are becoming increasingly incompatible with the complexities, challenges, and resource constraints of our modern healthcare systems and are being replaced by electronic order entry systems. Electronic systems that allow direct provider input of diagnostic testing or medication orders into a computer system are known as Computerized Provider Order Entry (CPOE) systems. Adoption of laboratory CPOE systems may offer institutions many benefits, including reduced test turnaround time, improved test utilization, and better adherence to practice guidelines. In this review, we outline the functionality of various CPOE implementations, review the reported benefits, and discuss strategies for using CPOE to improve the test ordering process. Further, we discuss barriers to the implementation of CPOE systems that have prevented their more widespread adoption. PMID:21886891

A fault isolation method based on the incidence matrix of an augmented system

NASA Astrophysics Data System (ADS)

Chen, Changxiong; Chen, Liping; Ding, Jianwan; Wu, Yizhong

2018-03-01

A new approach is proposed for isolating faults and fast identifying the redundant sensors of a system in this paper. By introducing fault signal as additional state variable, an augmented system model is constructed by the original system model, fault signals and sensor measurement equations. The structural properties of an augmented system model are provided in this paper. From the viewpoint of evaluating fault variables, the calculating correlations of the fault variables in the system can be found, which imply the fault isolation properties of the system. Compared with previous isolation approaches, the highlights of the new approach are that it can quickly find the faults which can be isolated using exclusive residuals, at the same time, and can identify the redundant sensors in the system, which are useful for the design of diagnosis system. The simulation of a four-tank system is reported to validate the proposed method.

Unsupervised Ontology Generation from Unstructured Text. CRESST Report 827

ERIC Educational Resources Information Center

Mousavi, Hamid; Kerr, Deirdre; Iseli, Markus R.

2013-01-01

Ontologies are a vital component of most knowledge acquisition systems, and recently there has been a huge demand for generating ontologies automatically since manual or supervised techniques are not scalable. In this paper, we introduce "OntoMiner", a rule-based, iterative method to extract and populate ontologies from unstructured or…

Positioning (Mis)Aligned: The (Un)Making of Intercultural Asynchronous Computer-Mediated Communication

ERIC Educational Resources Information Center

Wu, Zhiwei

2018-01-01

Framed from positioning theory and dynamic systems theory, the paper reports on a naturalistic study involving four Chinese participants and their American peers in an intercultural asynchronous computer-mediated communication (ACMC) activity. Based on the moment-by-moment analysis and triangulation of forum posts, reflective essays, and…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kargupta, H.; Stafford, B.; Hamzaoglu, I.

This paper describes an experimental parallel/distributed data mining system PADMA (PArallel Data Mining Agents) that uses software agents for local data accessing and analysis and a web based interface for interactive data visualization. It also presents the results of applying PADMA for detecting patterns in unstructured texts of postmortem reports and laboratory test data for Hepatitis C patients.

Upsurge and Upheaval in School Law.

ERIC Educational Resources Information Center

National Organization on Legal Problems of Education, Topeka, KS.

This report compiles papers and panel discussions, on various aspects of school law, that were presented at the 15th annual NOLPE convention. Major presentations include: Terrence E. Hatch, "The Principal's Role in Collective Negotiations"; Philip K. Piele, "Document-Based Information Systems Responsive to Legal Problems in Education"; Sam Duker,…

Working Conditions: Job Design. Working Paper #4.

ERIC Educational Resources Information Center

Gersten, Russell; And Others

This summary report presents an integration of findings on teachers' perceptions of their working conditions, based on survey and interview data from special educators in six large urban school districts. Emphasis is on perceptions of problems related to job design, the highly interrelated set of structures, systems, and processes intended to…

Knowledge Representation in a Physics Tutor. COINS Technical Report 86-37.

ERIC Educational Resources Information Center

Murray, Tom; Woolf, Beverly

This paper is based on the idea that designing a knowledge representation for an intelligent physics computer tutoring system depends, in part, on the target behavior anticipated from the student. In addition, the document distinguishes between qualitative and quantitative competence in physics. These competencies are illustrated through questions…

Information Prosthetics for the Handicapped. Final Report.

ERIC Educational Resources Information Center

Papert, Seymour A.

The paper describes the successful use of the LOGO System (an interactive graphics, computer based learning environment) with 12 severely physically handicapped adolescents with cerebral palsy. Five goals were set forth concerning the opportunity to work with microcomputers in interesting ways, the assessment of the students' spatial competence,…

State University System of Florida

ERIC Educational Resources Information Center

Board of Governors, State University System of Florida, 2012

2012-01-01

This paper presents some information about the State University System of Florida. The following are presented in this paper: (1) University Work Plans and Annual Reports; (2) State University System 2009 Annual Report; (3) Quick Facts: Planned New Degree Programs--2010 to 2013; (4) State University System Tuition Differential Summary, FY…

Research and development studies for MHD/coal power flow train components. Technical progress report, 1 September 1979-31 August 1980

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bloom, M. H.

1980-01-01

The aim of this program is to contribute to certain facets of the development of the MHD/coal power system, and particularly the CDIF of DOE with regard to its flow train. Consideration is given specifically to the electrical power take-off, the diagnostic and instrumentation systems, the combustor and MHD channel technology, and electrode alternatives. Within the constraints of the program, high priorities were assigned to the problems of power take-off and the related characteristics of the MHD channel, and to the establishment of a non-intrusive, laser-based diagnostic system. The next priority was given to the combustor modeling and to amore » significantly improved analysis of particle combustion. Separate abstracts were prepared for nine of the ten papers included. One paper was previously included in the data base. (WHK)« less

Section on Supernova Remnants and Cosmic Rays of the White Paper on the Status and Future of Ground-Based Gamma-Ray Astronomy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pohl, M.; /Iowa State U.; Abdo, Aous A.

This is a report on the findings of the SNR/cosmic-ray working group for the white paper on the status and future of ground-based gamma-ray astronomy. The white paper is an APS commissioned document, and the overall version has also been released and can be found on astro-ph. This detailed section of the white paper discusses the status of past and current attempts to observe shell-type supernova remnants and diffuse emission from cosmic rays at GeV-TeV energies. We concentrate on the potential of future ground-based gamma-ray experiments to study the acceleration of relativistic charged particles which is one of the mainmore » unsolved, yet fundamental, problems in modern astrophysics. The acceleration of particles relies on interactions between energetic particles and magnetic turbulence. In the case of SNRs we can perform spatially resolved studies in systems with known geometry, and the plasma physics deduced from these observations will help us to understand other systems where rapid particle acceleration is believed to occur and where observations as detailed as those of SNRs are not possible.« less

Multiscale Support Vector Learning With Projection Operator Wavelet Kernel for Nonlinear Dynamical System Identification.

PubMed

Lu, Zhao; Sun, Jing; Butts, Kenneth

2016-02-03

A giant leap has been made in the past couple of decades with the introduction of kernel-based learning as a mainstay for designing effective nonlinear computational learning algorithms. In view of the geometric interpretation of conditional expectation and the ubiquity of multiscale characteristics in highly complex nonlinear dynamic systems [1]-[3], this paper presents a new orthogonal projection operator wavelet kernel, aiming at developing an efficient computational learning approach for nonlinear dynamical system identification. In the framework of multiresolution analysis, the proposed projection operator wavelet kernel can fulfill the multiscale, multidimensional learning to estimate complex dependencies. The special advantage of the projection operator wavelet kernel developed in this paper lies in the fact that it has a closed-form expression, which greatly facilitates its application in kernel learning. To the best of our knowledge, it is the first closed-form orthogonal projection wavelet kernel reported in the literature. It provides a link between grid-based wavelets and mesh-free kernel-based methods. Simulation studies for identifying the parallel models of two benchmark nonlinear dynamical systems confirm its superiority in model accuracy and sparsity.

Technology-based management of environmental organizations using an Environmental Management Information System (EMIS): Design and development

NASA Astrophysics Data System (ADS)

Kouziokas, Georgios N.

2016-01-01

The adoption of Information and Communication Technologies (ICT) in environmental management has become a significant demand nowadays with the rapid growth of environmental information. This paper presents a prototype Environmental Management Information System (EMIS) that was developed to provide a systematic way of managing environmental data and human resources of an environmental organization. The system was designed using programming languages, a Database Management System (DBMS) and other technologies and programming tools and combines information from the relational database in order to achieve the principal goals of the environmental organization. The developed application can be used to store and elaborate information regarding: human resources data, environmental projects, observations, reports, data about the protected species, environmental measurements of pollutant factors or other kinds of analytical measurements and also the financial data of the organization. Furthermore, the system supports the visualization of spatial data structures by using geographic information systems (GIS) and web mapping technologies. This paper describes this prototype software application, its structure, its functions and how this system can be utilized to facilitate technology-based environmental management and decision-making process.

A high speed, portable, multi-function, weigh-in-motion (WIM) sensing system and a high performance optical fiber Bragg grating (FBG) demodulator

NASA Astrophysics Data System (ADS)

Zhang, Hongtao; Wei, Zhanxiong; Fan, Lingling; Yang, Shangming; Wang, Pengfei; Cui, Hong-Liang

2010-04-01

A high speed, portable, multi-function WIM sensing system based on Fiber Bragg Grating (FBG) technology is reported in this paper. This system is developed to measure the total weight, the distribution of weight of vehicle in motion, the distance of wheel axles and the distance between left and right wheels. In this system, a temperature control system and a real-time compensation system are employed to eliminate the drifts of optical fiber Fabry-Pérot tunable filter. Carbon Fiber Laminated Composites are used in the sensor heads to obtain high reliability and sensitivity. The speed of tested vehicles is up to 20 mph, the full scope of measurement is 4000 lbs, and the static resolution of sensor head is 20 lbs. The demodulator has high speed (500 Hz) data collection, and high stability. The demodulator and the light source are packed into a 17'' rack style enclosure. The prototype has been tested respectively at Stevens' campus and Army base. Some experiences of avoiding the pitfalls in developing this system are also presented in this paper.

A qualitative appraisal of stakeholder reactions to a tool for burden of disease–based health system budgeting in Ghana

PubMed Central

Awoonor-Williams, John Koku; Schmitt, Margaret L.; Tiah, Janet; Ndago, Joyce; Asuru, Rofina; Bawah, Ayaga A.; Phillips, James F.

2016-01-01

Background In 2010, the Ghana Health Service launched a program of cooperation with the Tanzania Ministry of Health and Social Welfare that was designed to adapt Tanzania's PLANREP budgeting and reporting tool to Ghana's primary health care program. The product of this collaboration is a system of budgeting, data visualization, and reporting that is known as the District Health Planning and Reporting Tool (DiHPART). Objective This study was conducted to evaluate the design and implementation processes (technical, procedures, feedback, maintenance, and monitoring) of the DiHPART tool in northern Ghana. Design This paper reports on a qualitative appraisal of user reactions to the DiHPART system and implications of pilot experience for national scale-up. A total of 20 health officials responsible for financial planning operations were drawn from the national, regional, and district levels of the health system and interviewed in open-ended discussions about their reactions to DiHPART and suggestions for systems development. Results The findings show that technical shortcomings merit correction before scale-up can proceed. The review makes note of features of the software system that could be developed, based on experience gained from the pilot. Changes in the national system of financial reporting and budgeting complicate DiHPART utilization. This attests to the importance of pursuing a software application framework that anticipates the need for automated software generation. Conclusions Despite challenges encountered in the pilot, the results lend support to the notion that evidence-based budgeting merits development and implementation in Ghana. PMID:27246868

Logistical Consideration in Computer-Based Screening of Astronaut Applicants

NASA Technical Reports Server (NTRS)

Galarza, Laura

2000-01-01

This presentation reviews the logistical, ergonomic, and psychometric issues and data related to the development and operational use of a computer-based system for the psychological screening of astronaut applicants. The Behavioral Health and Performance Group (BHPG) at the Johnson Space Center upgraded its astronaut psychological screening and selection procedures for the 1999 astronaut applicants and subsequent astronaut selection cycles. The questionnaires, tests, and inventories were upgraded from a paper-and-pencil system to a computer-based system. Members of the BHPG and a computer programmer designed and developed needed interfaces (screens, buttons, etc.) and programs for the astronaut psychological assessment system. This intranet-based system included the user-friendly computer-based administration of tests, test scoring, generation of reports, the integration of test administration and test output to a single system, and a complete database for past, present, and future selection data. Upon completion of the system development phase, four beta and usability tests were conducted with the newly developed system. The first three tests included 1 to 3 participants each. The final system test was conducted with 23 participants tested simultaneously. Usability and ergonomic data were collected from the system (beta) test participants and from 1999 astronaut applicants who volunteered the information in exchange for anonymity. Beta and usability test data were analyzed to examine operational, ergonomic, programming, test administration and scoring issues related to computer-based testing. Results showed a preference for computer-based testing over paper-and -pencil procedures. The data also reflected specific ergonomic, usability, psychometric, and logistical concerns that should be taken into account in future selection cycles. Conclusion. Psychological, psychometric, human and logistical factors must be examined and considered carefully when developing and using a computer-based system for psychological screening and selection.

Model Based Document and Report Generation for Systems Engineering

NASA Technical Reports Server (NTRS)

Delp, Christopher; Lam, Doris; Fosse, Elyse; Lee, Cin-Young

2013-01-01

As Model Based Systems Engineering (MBSE) practices gain adoption, various approaches have been developed in order to simplify and automate the process of generating documents from models. Essentially, all of these techniques can be unified around the concept of producing different views of the model according to the needs of the intended audience. In this paper, we will describe a technique developed at JPL of applying SysML Viewpoints and Views to generate documents and reports. An architecture of model-based view and document generation will be presented, and the necessary extensions to SysML with associated rationale will be explained. A survey of examples will highlight a variety of views that can be generated, and will provide some insight into how collaboration and integration is enabled. We will also describe the basic architecture for the enterprise applications that support this approach.

Model based document and report generation for systems engineering

NASA Astrophysics Data System (ADS)

Delp, C.; Lam, D.; Fosse, E.; Lee, Cin-Young

As Model Based Systems Engineering (MBSE) practices gain adoption, various approaches have been developed in order to simplify and automate the process of generating documents from models. Essentially, all of these techniques can be unified around the concept of producing different views of the model according to the needs of the intended audience. In this paper, we will describe a technique developed at JPL of applying SysML Viewpoints and Views to generate documents and reports. An architecture of model-based view and document generation will be presented, and the necessary extensions to SysML with associated rationale will be explained. A survey of examples will highlight a variety of views that can be generated, and will provide some insight into how collaboration and integration is enabled. We will also describe the basic architecture for the enterprise applications that support this approach.

Apoptosis and Self-Destruct: A Contribution to Autonomic Agents?

NASA Technical Reports Server (NTRS)

Sterritt, Roy; Hinchey, Mike

2004-01-01

Autonomic Computing (AC), a self-managing systems initiative based on the biological metaphor of the autonomic nervous system, is increasingly gaining momentum as the way forward in designing reliable systems. Agent technologies have been identified as a key enabler for engineering autonomicity in systems, both in terms of retrofitting autonomicity into legacy systems and designing new systems. The AC initiative provides an opportunity to consider other biological systems and principles in seeking new design strategies. This paper reports on one such investigation; utilizing the apoptosis metaphor of biological systems to provide a dynamic health indicator signal between autonomic agents.

OCLC In Retrospect; A Review Of the Impact of the OCLC System On the Administration of a Large University Technical Services Operations.

ERIC Educational Resources Information Center

Nitecki, Joseph Z.

The paper expresses the viewpoint of the author, based on his own two-year experience in supervising the use of the on-line Ohio College Library Center (OCLC) system in Temple University Library. The report contains a brief description of the formation of the Philadelphia Area Library Network (PALINET) and it lists some problems dealt with by…

England's New Market Based System of Student Education: An Initial Report. Research & Occasional Paper Series: CSHE.7.13

ERIC Educational Resources Information Center

Brown, Roger

2013-01-01

In 2012 the Conservative-Liberal Democrat Government introduced a number of reforms to the higher education system in England. The main change was to abolish direct state subsidies for the teaching of most subjects, and replace them with a state-subsidised tuition fee of up to $9,000 (US $13,700). A number of other changes were also made, all with…

Limitations imposed on fire PRA methods as the result of incomplete and uncertain fire event data.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nowlen, Steven Patrick; Hyslop, J. S.

2010-04-01

Fire probabilistic risk assessment (PRA) methods utilize data and insights gained from actual fire events in a variety of ways. For example, fire occurrence frequencies, manual fire fighting effectiveness and timing, and the distribution of fire events by fire source and plant location are all based directly on the historical experience base. Other factors are either derived indirectly or supported qualitatively based on insights from the event data. These factors include the general nature and intensity of plant fires, insights into operator performance, and insights into fire growth and damage behaviors. This paper will discuss the potential methodology improvements thatmore » could be realized if more complete fire event reporting information were available. Areas that could benefit from more complete event reporting that will be discussed in the paper include fire event frequency analysis, analysis of fire detection and suppression system performance including incipient detection systems, analysis of manual fire fighting performance, treatment of fire growth from incipient stages to fully-involved fires, operator response to fire events, the impact of smoke on plant operations and equipment, and the impact of fire-induced cable failures on plant electrical circuits.« less

Calibration of Smartphone-Based Weather Measurements Using Pairwise Gossip.

PubMed

Zamora, Jane Louie Fresco; Kashihara, Shigeru; Yamaguchi, Suguru

2015-01-01

Accurate and reliable daily global weather reports are necessary for weather forecasting and climate analysis. However, the availability of these reports continues to decline due to the lack of economic support and policies in maintaining ground weather measurement systems from where these reports are obtained. Thus, to mitigate data scarcity, it is required to utilize weather information from existing sensors and built-in smartphone sensors. However, as smartphone usage often varies according to human activity, it is difficult to obtain accurate measurement data. In this paper, we present a heuristic-based pairwise gossip algorithm that will calibrate smartphone-based pressure sensors with respect to fixed weather stations as our referential ground truth. Based on actual measurements, we have verified that smartphone-based readings are unstable when observed during movement. Using our calibration algorithm on actual smartphone-based pressure readings, the updated values were significantly closer to the ground truth values.

Calibration of Smartphone-Based Weather Measurements Using Pairwise Gossip

PubMed Central

Yamaguchi, Suguru

2015-01-01

Accurate and reliable daily global weather reports are necessary for weather forecasting and climate analysis. However, the availability of these reports continues to decline due to the lack of economic support and policies in maintaining ground weather measurement systems from where these reports are obtained. Thus, to mitigate data scarcity, it is required to utilize weather information from existing sensors and built-in smartphone sensors. However, as smartphone usage often varies according to human activity, it is difficult to obtain accurate measurement data. In this paper, we present a heuristic-based pairwise gossip algorithm that will calibrate smartphone-based pressure sensors with respect to fixed weather stations as our referential ground truth. Based on actual measurements, we have verified that smartphone-based readings are unstable when observed during movement. Using our calibration algorithm on actual smartphone-based pressure readings, the updated values were significantly closer to the ground truth values. PMID:26421312

Exchanging clinical knowledge via Internet.

PubMed

Buchan, I E; Hanka, R

1997-11-01

The need for effective and efficient exchange of clinical knowledge is increasing. Paper based methods for managing clinical knowledge are not meeting the demand for knowledge and this has undoubtedly contributed to the widely reported failures of clinical guidelines. Internet affords both opportunities and dangers for clinical knowledge. Systems such as Wax have demonstrated the importance of intuitive structure in the management of knowledge. We report on a new initiative for the global management of clinical knowledge.

RFID - based Staff Control System (SCS) in Kazakhstan

NASA Astrophysics Data System (ADS)

Saparkhojayev, N.

2015-06-01

RFID - based Staff Control System (SCS) will allow complete hands-free access control, monitoring the whereabouts of employee and record the attendance of the employee as well. Moreover, with a help of this system, it is possible to have a nice report at the end of the month and based on the total number of worked hours, the salary will be allocated to each personnel. The access tag can be read up to 10 centimeters from the RFID reader. The proposed system is based on UHF RFID readers, supported with antennas at gate and transaction sections, and employee identification cards containing RFID-transponders which are able to electronically store information that can be read / written even without the physical contact with the help of radio medium. This system is an innovative system, which describes the benefits of applying RFID- technology in the Education System process of Republic of Kazakhstan. This paper presents the experiments conducted to set up RFID based SCS.

High speed wavefront sensorless aberration correction in digital micromirror based confocal microscopy.

PubMed

Pozzi, P; Wilding, D; Soloviev, O; Verstraete, H; Bliek, L; Vdovin, G; Verhaegen, M

2017-01-23

The quality of fluorescence microscopy images is often impaired by the presence of sample induced optical aberrations. Adaptive optical elements such as deformable mirrors or spatial light modulators can be used to correct aberrations. However, previously reported techniques either require special sample preparation, or time consuming optimization procedures for the correction of static aberrations. This paper reports a technique for optical sectioning fluorescence microscopy capable of correcting dynamic aberrations in any fluorescent sample during the acquisition. This is achieved by implementing adaptive optics in a non conventional confocal microscopy setup, with multiple programmable confocal apertures, in which out of focus light can be separately detected, and used to optimize the correction performance with a sampling frequency an order of magnitude faster than the imaging rate of the system. The paper reports results comparing the correction performances to traditional image optimization algorithms, and demonstrates how the system can compensate for dynamic changes in the aberrations, such as those introduced during a focal stack acquisition though a thick sample.

Rhizoslides: paper-based growth system for non-destructive, high throughput phenotyping of root development by means of image analysis.

PubMed

Le Marié, Chantal; Kirchgessner, Norbert; Marschall, Daniela; Walter, Achim; Hund, Andreas

2014-01-01

A quantitative characterization of root system architecture is currently being attempted for various reasons. Non-destructive, rapid analyses of root system architecture are difficult to perform due to the hidden nature of the root. Hence, improved methods to measure root architecture are necessary to support knowledge-based plant breeding and to analyse root growth responses to environmental changes. Here, we report on the development of a novel method to reveal growth and architecture of maize root systems. The method is based on the cultivation of different root types within several layers of two-dimensional, large (50 × 60 cm) plates (rhizoslides). A central plexiglass screen stabilizes the system and is covered on both sides with germination paper providing water and nutrients for the developing root, followed by a transparent cover foil to prevent the roots from falling dry and to stabilize the system. The embryonic roots grow hidden between a Plexiglas surface and paper, whereas crown roots grow visible between paper and the transparent cover. Long cultivation with good image quality up to 20 days (four fully developed leaves) was enhanced by suppressing fungi with a fungicide. Based on hyperspectral microscopy imaging, the quality of different germination papers was tested and three provided sufficient contrast to distinguish between roots and background (segmentation). Illumination, image acquisition and segmentation were optimised to facilitate efficient root image analysis. Several software packages were evaluated with regard to their precision and the time investment needed to measure root system architecture. The software 'Smart Root' allowed precise evaluation of root development but needed substantial user interference. 'GiaRoots' provided the best segmentation method for batch processing in combination with a good analysis of global root characteristics but overestimated root length due to thinning artefacts. 'WhinRhizo' offered the most rapid and precise evaluation of root lengths in diameter classes, but had weaknesses with respect to image segmentation and analysis of root system architecture. A new technique has been established for non-destructive root growth studies and quantification of architectural traits beyond seedlings stages. However, automation of the scanning process and appropriate software remains the bottleneck for high throughput analysis.

An introduction to digital modulation and OFDM techniques

NASA Astrophysics Data System (ADS)

Maddocks, M. C. D.

This report differs from most BBC Research Department reports in that it does not contain details of a specific project undertaken at Kingswood Warren. While there has been a continuing development of aspects of digital modulation systems by BBC research engineers over many years, the purpose of this report is to be tutorial. That is, digital transmission techniques need to be explained in a general way if full advantage is to be obtained from other reports concerning digital broadcasting transmission systems. There are, however, references to other specialized publications if particular details are required. The text of this report is based on a paper which was prepared for an Institution of Electrical Engineers' vacation school on new broadcast standards and systems. It discusses, at a general level, the various issues and trade-offs that must be considered in the design of a digital modulation system for broadcast use. It particularly concentrates on giving a simple description of the use and benefits of OFDM systems. The particular issues can be applied to various future broadcast systems which are under development at the BBC and as part of collaborative work in international projects.

An effectiveness analysis of healthcare systems using a systems theoretic approach.

PubMed

Chuang, Sheuwen; Inder, Kerry

2009-10-24

The use of accreditation and quality measurement and reporting to improve healthcare quality and patient safety has been widespread across many countries. A review of the literature reveals no association between the accreditation system and the quality measurement and reporting systems, even when hospital compliance with these systems is satisfactory. Improvement of health care outcomes needs to be based on an appreciation of the whole system that contributes to those outcomes. The research literature currently lacks an appropriate analysis and is fragmented among activities. This paper aims to propose an integrated research model of these two systems and to demonstrate the usefulness of the resulting model for strategic research planning. To achieve these aims, a systematic integration of the healthcare accreditation and quality measurement/reporting systems is structured hierarchically. A holistic systems relationship model of the administration segment is developed to act as an investigation framework. A literature-based empirical study is used to validate the proposed relationships derived from the model. Australian experiences are used as evidence for the system effectiveness analysis and design base for an adaptive-control study proposal to show the usefulness of the system model for guiding strategic research. Three basic relationships were revealed and validated from the research literature. The systemic weaknesses of the accreditation system and quality measurement/reporting system from a system flow perspective were examined. The approach provides a system thinking structure to assist the design of quality improvement strategies. The proposed model discovers a fourth implicit relationship, a feedback between quality performance reporting components and choice of accreditation components that is likely to play an important role in health care outcomes. An example involving accreditation surveyors is developed that provides a systematic search for improving the impact of accreditation on quality of care and hence on the accreditation/performance correlation. There is clear value in developing a theoretical systems approach to achieving quality in health care. The introduction of the systematic surveyor-based search for improvements creates an adaptive-control system to optimize health care quality. It is hoped that these outcomes will stimulate further research in the development of strategic planning using systems theoretic approach for the improvement of quality in health care.

The digital language of amino acids.

PubMed

Kurić, L

2007-11-01

The subject of this paper is a digital approach to the investigation of the biochemical basis of genetic processes. The digital mechanism of nucleic acid and protein bio-syntheses, the evolution of biomacromolecules and, especially, the biochemical evolution of genetic language have been analyzed by the application of cybernetic methods, information theory and system theory, respectively. This paper reports the discovery of new methods for developing the new technologies in genetics. It is about the most advanced digital technology which is based on program, cybernetics and informational systems and laws. The results in the practical application of the new technology could be useful in bioinformatics, genetics, biochemistry, medicine and other natural sciences.

Microvalve-based bioprinting - process, bio-inks and applications.

PubMed

Ng, Wei Long; Lee, Jia Min; Yeong, Wai Yee; Win Naing, May

2017-03-28

Bioprinting is an emerging research field that has attracted tremendous attention for various applications; it offers a highly automated, advanced manufacturing platform for the fabrication of complex bioengineered constructs. Different bio-inks comprising multiple types of printable biomaterials and cells are utilized during the bioprinting process to improve the homology to native tissues and/or organs in a highly reproducible manner. This paper, presenting a first-time comprehensive yet succinct review of microvalve-based bioprinting, provides an in-depth analysis and comparison of different drop-on-demand bioprinting systems and highlights the important considerations for microvalve-based bioprinting systems. This review paper reports a detailed analysis of its printing process, bio-ink properties and cellular components on the printing outcomes. Lastly, this review highlights the significance of drop-on-demand bioprinting for various applications such as high-throughput screening, fundamental cell biology research, in situ bioprinting and fabrication of in vitro tissue constructs and also presents future directions to transform the microvalve-based bioprinting technology into imperative tools for tissue engineering and regenerative medicine.

Estimating the neutrally buoyant energy density of a Rankine-cycle/fuel-cell underwater propulsion system

NASA Astrophysics Data System (ADS)

Waters, Daniel F.; Cadou, Christopher P.

2014-02-01

A unique requirement of underwater vehicles' power/energy systems is that they remain neutrally buoyant over the course of a mission. Previous work published in the Journal of Power Sources reported gross as opposed to neutrally-buoyant energy densities of an integrated solid oxide fuel cell/Rankine-cycle based power system based on the exothermic reaction of aluminum with seawater. This paper corrects this shortcoming by presenting a model for estimating system mass and using it to update the key findings of the original paper in the context of the neutral buoyancy requirement. It also presents an expanded sensitivity analysis to illustrate the influence of various design and modeling assumptions. While energy density is very sensitive to turbine efficiency (sensitivity coefficient in excess of 0.60), it is relatively insensitive to all other major design parameters (sensitivity coefficients < 0.15) like compressor efficiency, inlet water temperature, scaling methodology, etc. The neutral buoyancy requirement introduces a significant (∼15%) energy density penalty but overall the system still appears to offer factors of five to eight improvements in energy density (i.e., vehicle range/endurance) over present battery-based technologies.

A comparison of smartphones to paper-based questionnaires for routine influenza sentinel surveillance, Kenya, 2011-2012.

PubMed

Njuguna, Henry N; Caselton, Deborah L; Arunga, Geoffrey O; Emukule, Gideon O; Kinyanjui, Dennis K; Kalani, Rosalia M; Kinkade, Carl; Muthoka, Phillip M; Katz, Mark A; Mott, Joshua A

2014-12-24

For disease surveillance, manual data collection using paper-based questionnaires can be time consuming and prone to errors. We introduced smartphone data collection to replace paper-based data collection for an influenza sentinel surveillance system in four hospitals in Kenya. We compared the quality, cost and timeliness of data collection between the smartphone data collection system and the paper-based system. Since 2006, the Kenya Ministry of Health (MoH) with technical support from the Kenya Medical Research Institute/Centers for Disease Control and Prevention (KEMRI/CDC) conducted hospital-based sentinel surveillance for influenza in Kenya. In May 2011, the MOH replaced paper-based collection with an electronic data collection system using Field Adapted Survey Toolkit (FAST) on HTC Touch Pro2 smartphones at four sentinel sites. We compared 880 paper-based questionnaires dated Jan 2010-Jun 2011 and 880 smartphone questionnaires dated May 2011-Jun 2012 from the four surveillance sites. For each site, we compared the quality, cost and timeliness of each data collection system. Incomplete records were more likely seen in data collected using pen-and-paper compared to data collected using smartphones (adjusted incidence rate ratio (aIRR) 7, 95% CI: 4.4-10.3). Errors and inconsistent answers were also more likely to be seen in data collected using pen-and-paper compared to data collected using smartphones (aIRR: 25, 95% CI: 12.5-51.8). Smartphone data was uploaded into the database in a median time of 7 days while paper-based data took a median of 21 days to be entered (p < 0.01). It cost USD 1,501 (9.4%) more to establish the smartphone data collection system ($17,500) than the pen-and-paper system (USD $15,999). During two years, however, the smartphone data collection system was $3,801 (7%) less expensive to operate ($50,200) when compared to pen-and-paper system ($54,001). Compared to paper-based data collection, an electronic data collection system produced fewer incomplete data, fewer errors and inconsistent responses and delivered data faster. Although start-up costs were higher, the overall costs of establishing and running the electronic data collection system were lower compared to paper-based data collection system. Electronic data collection using smartphones has potential to improve timeliness, data integrity and reduce costs.

On-Line Retrieval System Design; Part V of Scientific Report No. ISR-18, Information Storage and Retrieval...

ERIC Educational Resources Information Center

Cornell Univ., Ithaca, NY. Dept. of Computer Science.

On-line retrieval system design is discussed in the two papers which make up Part Five of this report on Salton's Magical Automatic Retriever of Texts (SMART) project report. The first paper: "A Prototype On-Line Document Retrieval System" by D. Williamson and R. Williamson outlines a design for a SMART on-line document retrieval system…

Moral Learning in the Space between Places: The Potential of Community-Based Moral Education.

ERIC Educational Resources Information Center

Schweigert, Francis J.

This paper presents the results of a heuristic and interpretive study of a public policy experiment in the criminal justice system, victim offender mediation conferencing. Conferences typically include the victim, the offender, their supporters and family members, and one or more conference facilitators. Participants report high levels of…

Exploring Competency Development with Mobile Devices

ERIC Educational Resources Information Center

DiGiuseppe, Maurice; Partosoedarso, Elita; Van Oostveen, Roland; Desjardins, Francois

2013-01-01

Computer-based technologies have been used in the field of education for over thirty years. However, more recently, powerful and more affordable mobile technologies are becoming popular in everyday life and the education system. This paper reports on an online survey of student body in a university in Ontario, Canada focused on the use of a wide…

Recruitment and Retention Problems in Paradise? Lessons from the Northern Mariana Islands.

ERIC Educational Resources Information Center

Rude, Harvey; And Others

This paper reports on a study that examined teacher recruitment and retention practices in the Northern Mariana Islands public school system. The study was conducted due to shortages of special education teachers and related services personnel. Based on a review of school district documents on recruitment and retention practices and interviews…

A Path to Formative Assessment through Naturalistic Inputs

ERIC Educational Resources Information Center

Cohen, Jonathan; Leroux, Audrey

2017-01-01

This paper reports on the development of a system in which naturalistic inputs are collected by a web-based e-reader and, in combination with a measurement of readers' comprehension of that text, are analyzed by a neural network to determine the nature of the relationship between the annotations and comprehension. Results showed that neural…

From Particular to Popular: Facilitating EFL Mobile-Supported Cooperative Reading

ERIC Educational Resources Information Center

Lan, Yu-Ju; Sung, Yao-Ting; Chang, Kuo-En

2013-01-01

This paper reports the results of an action research-based study that adapted a mobile-supported cooperative reading system into regular English as a foreign language (EFL) classes at one Taiwanese elementary school. The current study was comprised of two stages: adaptation and evaluation. During the adaptation stage, a mobile-supported…

Manpower Goals Planning and Accountability. Research Report 34.

ERIC Educational Resources Information Center

Niehaus, R. J.; Nitterhouse, D.

Based on previous application of goal programming models to manpower goals planning for large organizations, this paper structures the extensions from the planning process to the operations and control aspects of the management cycle. Emphasis is on the accountability necessary to make such a system an effective management control tool. In order…

From Dissemination to Propagation: A New Paradigm for Education Developers

ERIC Educational Resources Information Center

Froyd, Jeffrey E.; Henderson, Charles; Cole, Renée S.; Friedrichsen, Debra; Khatri, Raina; Stanford, Courtney

2017-01-01

Scholarly studies and national reports document failure of current efforts to achieve broad, sustained adoption of research-based instructional practices, despite compelling bodies of evidence supporting efficacy of many of these practices. The authors of this paper argue that many change agents who are working to promote systemic adoption of…

Data Collection and Use in Schools. PREL Briefing Paper.

ERIC Educational Resources Information Center

Farnsworth, Chenoa

This report summarizes the problems schools are encountering as they try to use data to gauge the effectiveness of standards-based education, accountability efforts, and school reform. It provides an overview of the education market, discusses the strengths and weaknesses of available software, and describes systems used by 19 states. The article…

Teacher Acceptance of Evaluation through Productivity Management.

ERIC Educational Resources Information Center

Garrett, A. Warren

This paper describes the purposes of educational evaluation with particular emphasis on school improvement. The evaluation process used was based upon the analytical tools developed and tested by the Educational Productivity Council (EPC) of the University of Texas. An early form of this model and reporting system was introduced to a group of 68…

Detection of chikungunya viral RNA in mosquito bodies on cationic (Q) paper based on innovations in synthetic biology.

PubMed

Glushakova, Lyudmyla G; Alto, Barry W; Kim, Myong Sang; Bradley, Andrea; Yaren, Ozlem; Benner, Steven A

2017-08-01

Chikungunya virus (CHIKV) represents a growing and global concern for public health that needs inexpensive and convenient methods to collect mosquitoes as potential carriers so that they can be preserved, stored and transported for later and/or remote analysis. Reported here is a cellulose-based paper, derivatized with quaternary ammonium groups ("Q-paper") that meets these needs. In a series of tests, infected mosquito bodies were squashed directly on Q-paper. Aqueous ammonia was then added on the mosquito bodies to release viral RNA that adsorbed on the cationic surface via electrostatic interactions. The samples were then stored (frozen) or transported. For analysis, the CHIKV nucleic acids were eluted from the Q-paper and PCR amplified in a workflow, previously developed, that also exploited two nucleic acid innovations, ("artificially expanded genetic information systems", AEGIS, and "self-avoiding molecular recognition systems", SAMRS). The amplicons were then analyzed by a Luminex hybridization assay. This procedure detected CHIKV RNA, if present, in each infected mosquito sample, but not in non-infected counterparts or ddH 2 O samples washes, with testing one week or ten months after sample collection. Copyright © 2017 Elsevier B.V. All rights reserved.

Manipulating flexible parts using a teleoperated system with time delay: An experiment

NASA Technical Reports Server (NTRS)

Kotoku, T.; Takamune, K.; Tanie, K.; Komoriya, K.; Matsuhira, N.; Asakura, M.; Bamba, H.

1994-01-01

This paper reports experiments involving the handling of flexible parts (e.g. wires) when using a teleoperated system with time delay. The task is principally a peg-in-hole task involving the wrapping of a wire around two posts on the task-board. It is difficult to estimate the effects of the flexible parts; therefore, on-line teleoperation is indispensable for this class of unpredictable task. We first propose a teleoperation system based on the predictive image display, then describe an experimental teleoperation testbed with a four second transmission time delay. Finally, we report on wire handling operations that were performed to evaluate the performance of this system. Those experiments will contribute to future advanced experiments for the MITI ETS-7 mission.

Using AI Planning Techniques to Automatically Generate Image Processing Procedures: A Preliminary Report

NASA Technical Reports Server (NTRS)

Chien, S.

1994-01-01

This paper describes work on the Multimission VICAR Planner (MVP) system to automatically construct executable image processing procedures for custom image processing requests for the JPL Multimission Image Processing Lab (MIPL). This paper focuses on two issues. First, large search spaces caused by complex plans required the use of hand encoded control information. In order to address this in a manner similar to that used by human experts, MVP uses a decomposition-based planner to implement hierarchical/skeletal planning at the higher level and then uses a classical operator based planner to solve subproblems in contexts defined by the high-level decomposition.

Effect of heater geometry and cavity volume on the sensitivity of a thermal convection-based tilt sensor

NASA Astrophysics Data System (ADS)

Han, Maeum; Keon Kim, Jae; Kong, Seong Ho; Kang, Shin-Won; Jung, Daewoong

2018-06-01

This paper reports a micro-electro-mechanical-system (MEMS)-based tilt sensor using air medium. Since the working mechanism of the sensor is the thermal convection in a sealed chamber, structural parameters that can affect thermal convection must be considered to optimize the performance of the sensor. This paper presents the experimental results that were conducted by optimizing several parameters such as the heater geometry, input power and cavity volume. We observed that an increase in the heating power and cavity volume can improve the sensitivity, and heater geometry plays important role in performance of the sensor.

a Radical Collaborative Approach: Developing a Model for Learning Theory, Human-Based Computation and Participant Motivation in a Rock-Art Heritage Application

NASA Astrophysics Data System (ADS)

Haubt, R.

2016-06-01

This paper explores a Radical Collaborative Approach in the global and centralized Rock-Art Database project to find new ways to look at rock-art by making information more accessible and more visible through public contributions. It looks at rock-art through the Key Performance Indicator (KPI), identified with the latest Australian State of the Environment Reports to help develop a better understanding of rock-art within a broader Cultural and Indigenous Heritage context. Using a practice-led approach the project develops a conceptual collaborative model that is deployed within the RADB Management System. Exploring learning theory, human-based computation and participant motivation the paper develops a procedure for deploying collaborative functions within the interface design of the RADB Management System. The paper presents the results of the collaborative model implementation and discusses considerations for the next iteration of the RADB Universe within an Agile Development Approach.

Modeling Renewable Penertration Using a Network Economic Model

NASA Astrophysics Data System (ADS)

Lamont, A.

2001-03-01

This paper evaluates the accuracy of a network economic modeling approach in designing energy systems having renewable and conventional generators. The network approach models the system as a network of processes such as demands, generators, markets, and resources. The model reaches a solution by exchanging prices and quantity information between the nodes of the system. This formulation is very flexible and takes very little time to build and modify models. This paper reports an experiment designing a system with photovoltaic and base and peak fossil generators. The level of PV penetration as a function of its price and the capacities of the fossil generators were determined using the network approach and using an exact, analytic approach. It is found that the two methods agree very closely in terms of the optimal capacities and are nearly identical in terms of annual system costs.

Lots of data, how do we use it? Strengths and inaccuracies of utility acid rain electronic data reports

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schott, J.

1996-12-31

Entergy Corporation is a Phase II utility with a fossil generation base composed primarily natural gas and low sulfur coal. This paper presents an analysis of a large Phase II utility`s continuous emissions monitoring data reported to EPA under Title IV Acid Rain. Electric utilities currently report hourly emissions of NOx, SO{sub 2}, CO{sub 2}, fuel use, and generation through electronic data reports to EPA. This paper describes strengths and weaknesses of the data reported to EPA as determined through an analysis of 1995 data. Emissions reported by this company tinder acid rain for SO{sub 2} and NOx are verymore » different from emissions reported to state agencies for annual emission inventory purposes in past years and will represent a significant break with historic trends. A comparison of emissions has been made of 1995 emissions reported under Electronic Data Reports to the emissions that would have been reported using emission factors and fuel data in past years. In addition, the paper examines the impacts of 40 CFR Part 75 Acid Rain requirements such as missing data substitution and monitor bias adjustments. Measurement system errors including stack flow measurement and false NOx Lb/MMBtu readings at very low loads are discussed. This paper describes the implications for public policy, compliance, emissions inventories, and business decisions of Part 75 acid rain monitoring and reporting requirements.« less

Optical fiber-based system for continuous measurement of in-bore projectile velocity.

PubMed

Wang, Guohua; Sun, Jinglin; Li, Qiang

2014-08-01

This paper reports the design of an optical fiber-based velocity measurement system and its application in measuring the in-bore projectile velocity. The measurement principle of the implemented system is based on Doppler effect and heterodyne detection technique. The analysis of the velocity measurement principle deduces the relationship between the projectile velocity and the instantaneous frequency (IF) of the optical fiber-based system output signal. To extract the IF of the fast-changing signal carrying the velocity information, an IF extraction algorithm based on the continuous wavelet transforms is detailed. Besides, the performance of the algorithm is analyzed by performing corresponding simulation. At last, an in-bore projectile velocity measurement experiment with a sniper rifle having a 720 m/s muzzle velocity is performed to verify the feasibility of the optical fiber-based velocity measurement system. Experiment results show that the measured muzzle velocity is 718.61 m/s, and the relative uncertainty of the measured muzzle velocity is approximately 0.021%.

Optical fiber-based system for continuous measurement of in-bore projectile velocity

NASA Astrophysics Data System (ADS)

Wang, Guohua; Sun, Jinglin; Li, Qiang

2014-08-01

This paper reports the design of an optical fiber-based velocity measurement system and its application in measuring the in-bore projectile velocity. The measurement principle of the implemented system is based on Doppler effect and heterodyne detection technique. The analysis of the velocity measurement principle deduces the relationship between the projectile velocity and the instantaneous frequency (IF) of the optical fiber-based system output signal. To extract the IF of the fast-changing signal carrying the velocity information, an IF extraction algorithm based on the continuous wavelet transforms is detailed. Besides, the performance of the algorithm is analyzed by performing corresponding simulation. At last, an in-bore projectile velocity measurement experiment with a sniper rifle having a 720 m/s muzzle velocity is performed to verify the feasibility of the optical fiber-based velocity measurement system. Experiment results show that the measured muzzle velocity is 718.61 m/s, and the relative uncertainty of the measured muzzle velocity is approximately 0.021%.

Superhydrophobic surfaces’ influence on streaming current based energy harvester

NASA Astrophysics Data System (ADS)

Fouché, Florent; Dargent, Thomas; Coffinier, Yannick; Treizebré, Anthony; Vlandas, Alexis; Senez, Vincent

2016-11-01

The purpose of this paper is to report the design, fabrication and characterization of silicon-based microfluidic channels with superhydrophobic walls for energy harvesting. We present the fabrication step of silicon based streaming current energy harvester and the nanostructuration of the microchannel walls. We characterize the superhydrophobic properties of the surface in a closed system. Our preliminary results on the electrical characterization of the device show a 43% increase of power harvested with our superhydrophobic surface compared to a planar hydrophobic surface.

Digital surfaces and hydrogeologic data for the Mesozoic through early Tertiary rocks in the Southeastern Coastal Plain in parts of Mississippi, Alabama, Georgia, South Carolina, and Florida

USGS Publications Warehouse

Cannon, Debra M.; Bellino, Jason C.; Williams, Lester J.

2012-01-01

A digital dataset of hydrogeologic data for Mesozoic through early Tertiary rocks in the Southeastern Coastal Plain was developed using data from five U.S. Geological Survey (USGS) reports published between 1951 and 1996. These reports contain maps and data depicting the extent and elevation of the Southeast Coastal Plain stratigraphic and hydrogeologic units in Florida and parts of Mississippi, Alabama, Georgia, and South Carolina. The reports are: Professional Paper 1410-B (Renken, 1996), Professional Paper 1088 (Brown and others, 1979), Professional Paper 524-G (Applin and Applin, 1967), Professional Paper 447 (Applin and Applin, 1965), and Circular 91 (Applin, 1951). The digital dataset provides hydrogeologic data for the USGS Energy Resources Program assessment of potential reservoirs for carbon sequestration and for the USGS Groundwater Resource Program assessment of saline aquifers in the southeastern United States. A Geographic Information System (ArcGIS 9.3.1) was used to construct 33 digital (raster) surfaces representing the top or base of key stratigraphic and hydrogeologic units. In addition, the Geographic Information System was used to generate 102 geo-referenced scanned maps from the five reports and a geo-database containing structural and thickness contours, faults, extent polygons, and common features. The dataset also includes point data of well construction and stratigraphic elevations and scanned images of two geologic cross sections and a nomenclature chart.

Minitrack on data and knowledge base issues in genomics at the 27th Hawaii International Conference on system sciences

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-05-01

This report is a summary of the proceedings from the Minitrack on Data and Knowledge Base Issues in Genomics at the 27th Hawaii International Conference on System Science, January 4 - 7, 1994. The minitrack was organized by Dong-Guk Shin (University of Connecticut) and Francois Rechenmann (INRIA, France). Support was jointly provided by the NSF, NIH and DOE. The minitrack included, after rigorous review, ten full papers and four extended abstracts in the following five different research subareas of genome informatics: data modeling and management, sequence analysis, graphical user interface, interoperation in a heterogenous computing environment, and system integration inmore » a knowledge-based approach.« less

Predicting Road Conditions with Internet Search

PubMed Central

2016-01-01

Traffic congestion is an important problem both on an individual and on a societal level and much research has been done to explain and prevent their emergence. There are currently many systems which provide a reasonably good picture of actual road traffic by employing either fixed measurement points on highways or so called “floating car data” i.e. by using velocity and location data from roaming, networked, GPS enabled members of traffic. Some of these systems also offer forecasting of road conditions based on such historical data. To my knowledge there is as yet no system which offers advance notice on road conditions based on a signal which is guaranteed to occur in advance of these conditions and this is the novelty of this paper. Google Search intensity for the German word stau (i.e. traffic jam) peaks 2 hours ahead of the number of traffic jam reports as reported by the ADAC, a well known German automobile club and the largest of its kind in Europe. This is true both in the morning (7 am to 9 am) and in the evening (4 pm to 6 pm). The main result of this paper is then that after controlling for time-of-day and day-of-week effects we can still explain a significant additional portion of the variation of the number of traffic jam reports with Google Trends and we can thus explain well over 80% of the variation of road conditions using Google search activity. A one percent increase in Google stau searches implies a .4 percent increase of traffic jams. Our paper is a proof of concept that aggregate, timely delivered behavioural data can help fine tune modern societies and prompts for more research with better, more disaggregated data in order to also achieve practical solutions. PMID:27571518

A microwave exciter for Cs frequency standards based on a sapphire-loaded cavity oscillator.

PubMed

Koga, Y; McNeilage, C; Searls, J H; Ohshima, S

2001-01-01

A low noise and highly stable microwave exciter system has been built for Cs atomic frequency standards using a tunable sapphire-loaded cavity oscillator (SLCO), which works at room temperature. This paper discusses the successful implementation of a control system for locking the SLCO to a long-term reference signal and reports an upper limit of the achieved frequency tracking error 6 x 10(-15) at tau = 1 s.

An enhanced MMW and SMMW/THz imaging system performance prediction and analysis tool for concealed weapon detection and pilotage obstacle avoidance

NASA Astrophysics Data System (ADS)

Murrill, Steven R.; Jacobs, Eddie L.; Franck, Charmaine C.; Petkie, Douglas T.; De Lucia, Frank C.

2015-10-01

The U.S. Army Research Laboratory (ARL) has continued to develop and enhance a millimeter-wave (MMW) and submillimeter- wave (SMMW)/terahertz (THz)-band imaging system performance prediction and analysis tool for both the detection and identification of concealed weaponry, and for pilotage obstacle avoidance. The details of the MATLAB-based model which accounts for the effects of all critical sensor and display components, for the effects of atmospheric attenuation, concealment material attenuation, and active illumination, were reported on at the 2005 SPIE Europe Security and Defence Symposium (Brugge). An advanced version of the base model that accounts for both the dramatic impact that target and background orientation can have on target observability as related to specular and Lambertian reflections captured by an active-illumination-based imaging system, and for the impact of target and background thermal emission, was reported on at the 2007 SPIE Defense and Security Symposium (Orlando). Further development of this tool that includes a MODTRAN-based atmospheric attenuation calculator and advanced system architecture configuration inputs that allow for straightforward performance analysis of active or passive systems based on scanning (single- or line-array detector element(s)) or staring (focal-plane-array detector elements) imaging architectures was reported on at the 2011 SPIE Europe Security and Defence Symposium (Prague). This paper provides a comprehensive review of a newly enhanced MMW and SMMW/THz imaging system analysis and design tool that now includes an improved noise sub-model for more accurate and reliable performance predictions, the capability to account for postcapture image contrast enhancement, and the capability to account for concealment material backscatter with active-illumination- based systems. Present plans for additional expansion of the model's predictive capabilities are also outlined.

A Comprehension Based Analysis of Autoflight System Interfaces

NASA Technical Reports Server (NTRS)

Palmer, Everett (Technical Monitor); Polson, Peter G.

2003-01-01

This cooperative agreement supported Dr. Peter Polson's participation in two interrelated research programs. The first was the development of the Situation-Goal-Behavior (SGB) Model that is both a formal description of an avionics system's logic and behavior and a representation of a system that can be understood by avionics designers, pilots, and training developers. The second was the development of a usability inspection method based on an approximate model, RAFIV, of pilot interactions with the Flight Management System (FMS). The main purpose of this report is to integrate the two models and provide a context in order to better characterize the accomplishments of this research program. A major focus of both the previous and this Cooperative Agreement was the development of usability evaluation methods that can be effectively utilized during all phases of the design, development, and certification process of modern avionics systems. The current efforts to validate these methods have involved showing that they generate useful analyses of known operational and training problems with the current generation of avionics systems in modern commercial airliners. This report is organized into seven sections. Following the overview, the second section describes the Goal-Situation-Behavior model and its applications. The next section summarizes the foundations of the RAFIV model and describes the model in some detail. The contents of both these sections are derived from previous reports referenced in footnotes. The fourth section integrates these two models into a complete design evaluation and training development framework. The fifth section contains conclusions and possible future directions for research. References are in Section 6. Section 7 contains the titles and abstracts of the papers paper describing in more detail the results of this research program.

Strontium Adsorption and Desorption Reactions in Model Drinking Water Distribution Systems

DTIC Science & Technology

2014-02-04

PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ORGANIZATION. 1. REPORT DATE (DD-MM-YYYY) 2. REPORT TYPE 3. DATES COVERED (From - To) 4. TITLE AND SUBTITLE...be enbmild lo the publications date base., in acx:ordanee with referenca (a). It is th$ opinion of the. author that the subjeet paper (is _ ) (IS...XANES INTRODUCTION Tammie L. Gerke (corresponding author) Department of Geology and Environmental Earth Science. Miami University, USA E-mail

An Assessment of Information Exchange Practices, Challenges, and Opportunities to Support US Disease Surveillance in 3 States.

PubMed

Garcia, Macarena C; Garrett, Nedra Y; Singletary, Vivian; Brown, Sheereen; Hennessy-Burt, Tamara; Haney, Gillian; Link, Kimberly; Tripp, Jennifer; Mac Kenzie, William R; Yoon, Paula

2017-12-07

State and local public health agencies collect and use surveillance data to identify outbreaks, track cases, investigate causes, and implement measures to protect the public-s health through various surveillance systems and data exchange practices. The purpose of this assessment was to better understand current practices at state and local public health agencies for collecting, managing, processing, reporting, and exchanging notifiable disease surveillance information. Over an 18-month period (January 2014-June 2015), we evaluated the process of data exchange between surveillance systems, reporting burdens, and challenges within 3 states (California, Idaho, and Massachusetts) that were using 3 different reporting systems. All 3 states use a combination of paper-based and electronic information systems for managing and exchanging data on reportable conditions within the state. The flow of data from local jurisdictions to the state health departments varies considerably. When state and local information systems are not interoperable, manual duplicative data entry and other work-arounds are often required. The results of the assessment show the complexity of disease reporting at the state and local levels and the multiple systems, processes, and resources engaged in preparing, processing, and transmitting data that limit interoperability and decrease efficiency. Through this structured assessment, the Centers for Disease Control and Prevention (CDC) has a better understanding of the complexities for surveillance of using commercial off-the-shelf data systems (California and Massachusetts), and CDC-developed National Electronic Disease Surveillance System Base System. More efficient data exchange and use of data will help facilitate interoperability between National Notifiable Diseases Surveillance Systems.

If You Build It Will They Come? Teacher Use of Student Performance Data on a Web-Based Tool. NBER Working Paper No. 17486

ERIC Educational Resources Information Center

Tyler, John H.

2011-01-01

The past decade has seen increased testing of students and the concomitant proliferation of computer-based systems to store, manage, analyze, and report the data that comes from these tests. The research to date on teacher use of these data has mostly been qualitative and has mostly focused on the conditions that are necessary (but not necessarily…

Paired peer review of university classroom teaching in a school of nursing and midwifery.

PubMed

Bennett, Paul N; Parker, Steve; Smigiel, Heather

2012-08-01

Peer review of university classroom teaching can increase the quality of teaching but is not universally practiced in Australian universities. To report an evaluation of paired peer-review process using both paper and web based teaching evaluation tools. Twenty university teachers in one metropolitan Australian School of Nursing and Midwifery were randomly paired and then randomly assigned to a paper based or web-based peer review tool. Each teacher reviewed each other's classroom teaching as part of a peer review program. The participants then completed an 18 question survey evaluating the peer review tool and paired evaluation process. Responses were analyzed using frequencies and percentages. Regardless of the tool used, participants found this process of peer review positive (75%), collegial (78%), supportive (61%) and non-threatening (71%). Participants reported that the peer review will improve their own classroom delivery (61%), teaching evaluation (61%) and planning (53%). The web-based tool was found to be easier to use and allowed more space than the paper-based tool. Implementation of a web-based paired peer review system can be a positive method of peer review of university classroom teaching. Pairing of teachers to review each other's classroom teaching is a promising strategy and has the potential to improve teaching in teaching universities. Copyright © 2011 Elsevier Ltd. All rights reserved.

A knowledge-based, concept-oriented view generation system for clinical data.

PubMed

Zeng, Q; Cimino, J J

2001-04-01

Information overload is a well-known problem for clinicians who must review large amounts of data in patient records. Concept-oriented views, which organize patient data around clinical concepts such as diagnostic strategies and therapeutic goals, may offer a solution to the problem of information overload. However, although concept-oriented views are desirable, they are difficult to create and maintain. We have developed a general-purpose, knowledge-based approach to the generation of concept-oriented views and have developed a system to test our approach. The system creates concept-oriented views through automated identification of relevant patient data. The knowledge in the system is represented by both a semantic network and rules. The key relevant data identification function is accomplished by a rule-based traversal of the semantic network. This paper focuses on the design and implementation of the system; an evaluation of the system is reported separately.

PMMA denture base material enhancement: a review of fiber, filler, and nanofiller addition

PubMed Central

Gad, Mohammed M; Fouda, Shaimaa M; Al-Harbi, Fahad A; Näpänkangas, Ritva; Raustia, Aune

2017-01-01

This paper reviews acrylic denture base resin enhancement during the past few decades. Specific attention is given to the effect of fiber, filler, and nanofiller addition on poly(methyl methacrylate) (PMMA) properties. The review is based on scientific reviews, papers, and abstracts, as well as studies concerning the effect of additives, fibers, fillers, and reinforcement materials on PMMA, published between 1974 and 2016. Many studies have reported improvement of PMMA denture base material with the addition of fillers, fibers, nanofiller, and hybrid reinforcement. However, most of the studies were limited to in vitro investigations without bioactivity and clinical implications. Considering the findings of the review, there is no ideal denture base material, but the properties of PMMA could be improved with some modifications, especially with silanized nanoparticle addition and a hybrid reinforcement system. PMID:28553115

A technology ecosystem perspective on hospital management information systems: lessons from the health literature.

PubMed

Bain, Christopher A; Standing, Craig

2009-01-01

Hospital managers have a large range of information needs including quality metrics, financial reports, access information needs, educational, resourcing and decision support needs. Currently these needs involve interactions by managers with numerous disparate systems, both electronic such as SAP, Oracle Financials, PAS' (patient administration systems) like HOMER, and relevant websites; and paper-based systems. Hospital management information systems (HMIS) can be thought of sitting within a Technology Ecosystem (TE). In addition, Hospital Management Information Systems (HMIS) could benefit from a broader and deeper TE model, and the HMIS environment may in fact represents its own TE (the HMTE). This research will examine lessons from the health literature in relation to some of these issues, and propose an extension to the base model of a TE.

Automated unit-level testing with heuristic rules

NASA Technical Reports Server (NTRS)

Carlisle, W. Homer; Chang, Kai-Hsiung; Cross, James H.; Keleher, William; Shackelford, Keith

1990-01-01

Software testing plays a significant role in the development of complex software systems. Current testing methods generally require significant effort to generate meaningful test cases. The QUEST/Ada system is a prototype system designed using CLIPS to experiment with expert system based test case generation. The prototype is designed to test for condition coverage, and attempts to generate test cases to cover all feasible branches contained in an Ada program. This paper reports on heuristics sued by the system. These heuristics vary according to the amount of knowledge obtained by preprocessing and execution of the boolean conditions in the program.

Determining Component Probability using Problem Report Data for Ground Systems used in Manned Space Flight

NASA Technical Reports Server (NTRS)

Monaghan, Mark W.; Gillespie, Amanda M.

2013-01-01

During the shuttle era NASA utilized a failure reporting system called the Problem Reporting and Corrective Action (PRACA) it purpose was to identify and track system non-conformance. The PRACA system over the years evolved from a relatively nominal way to identify system problems to a very complex tracking and report generating data base. The PRACA system became the primary method to categorize any and all anomalies from corrosion to catastrophic failure. The systems documented in the PRACA system range from flight hardware to ground or facility support equipment. While the PRACA system is complex, it does possess all the failure modes, times of occurrence, length of system delay, parts repaired or replaced, and corrective action performed. The difficulty is mining the data then to utilize that data in order to estimate component, Line Replaceable Unit (LRU), and system reliability analysis metrics. In this paper, we identify a methodology to categorize qualitative data from the ground system PRACA data base for common ground or facility support equipment. Then utilizing a heuristic developed for review of the PRACA data determine what reports identify a credible failure. These data are the used to determine inter-arrival times to perform an estimation of a metric for repairable component-or LRU reliability. This analysis is used to determine failure modes of the equipment, determine the probability of the component failure mode, and support various quantitative differing techniques for performing repairable system analysis. The result is that an effective and concise estimate of components used in manned space flight operations. The advantage is the components or LRU's are evaluated in the same environment and condition that occurs during the launch process.

ASICs Approach for the Implementation of a Symmetric Triangular Fuzzy Coprocessor and Its Application to Adaptive Filtering

NASA Technical Reports Server (NTRS)

Starks, Scott; Abdel-Hafeez, Saleh; Usevitch, Bryan

1997-01-01

This paper discusses the implementation of a fuzzy logic system using an ASICs design approach. The approach is based upon combining the inherent advantages of symmetric triangular membership functions and fuzzy singleton sets to obtain a novel structure for fuzzy logic system application development. The resulting structure utilizes a fuzzy static RAM to store the rule-base and the end-points of the triangular membership functions. This provides advantages over other approaches in which all sampled values of membership functions for all universes must be stored. The fuzzy coprocessor structure implements the fuzzification and defuzzification processes through a two-stage parallel pipeline architecture which is capable of executing complex fuzzy computations in less than 0.55us with an accuracy of more than 95%, thus making it suitable for a wide range of applications. Using the approach presented in this paper, a fuzzy logic rule-base can be directly downloaded via a host processor to an onchip rule-base memory with a size of 64 words. The fuzzy coprocessor's design supports up to 49 rules for seven fuzzy membership functions associated with each of the chip's two input variables. This feature allows designers to create fuzzy logic systems without the need for additional on-board memory. Finally, the paper reports on simulation studies that were conducted for several adaptive filter applications using the least mean squared adaptive algorithm for adjusting the knowledge rule-base.

An intermodal network model of coal distribution in the United States and its economic implications for the inland waterway system Kentucky : final report.

DOT National Transportation Integrated Search

2016-01-22

This paper describes a GIS-based intermodal network model for the shipment of coal in the United States. The purpose : of this research was to investigate the role played by railways, waterways, and highways in the movement of coal from : its source ...

Accountability Synopticism: How a Think Tank and the Media Developed a Quasimarket for School Choice in British Columbia

ERIC Educational Resources Information Center

Simmonds, Michael; Webb, P. Taylor

2013-01-01

This paper describes how a locally developed school ranking system affected student enrolment patterns in British Columbia over time. In developing an annual school "report card" that was published in newspapers and online, the Vancouver-based Fraser Institute created a marketplace for school choice by devising an accountability scheme…

Markers' Perceptions regarding the Onscreen Marking of Liberal Studies in the Hong Kong Public Examination System

ERIC Educational Resources Information Center

Coniam, David; Yeung, Sau-chu Alison

2010-01-01

This article reports the move from paper-based marking (PBM) to onscreen marking (OSM) in Hong Kong for the subject Liberal Studies--whose objectives involve broadening students' horizons through critical examination of current issues. While currently a small candidature subject of approximately 3300, from 2009, the subject will become compulsory…

A Resource Management Tool for Implementing Strategic Direction in an Academic Department

ERIC Educational Resources Information Center

Ringwood, John V.; Devitt, Frank; Doherty, Sean; Farrell, Ronan; Lawlor, Bob; McLoone, Sean C.; McLoone, Seamus F.; Rogers, Alan; Villing, Rudi; Ward, Tomas

2005-01-01

This paper reports on a load balancing system for an academic department, which can be used as an implementation mechanism for strategic planning. In essence, it consists of weighting each activity within the department and performing workload allocation based on this transparent scheme. The experience to date has been very positive, in terms of…

Clinical Assessment of the RHUMART System Based on the Use of Pulsed Electromagnetic Fields with Low Frequency.

ERIC Educational Resources Information Center

Begue-Simon, A-M.; Drolet, R. A.

1993-01-01

Difficulties in using the double-blind method of evaluation with use of Pulsed Electromagnetic Fields led to an open evaluation with 96 patients with musculoskeletal diseases, neurological disorders, circulatory diseases, or gastroenterological diseases. This paper reports the impact of use on dependency, pain, and patient satisfaction. (DB)

The Influence of Academic Values on Scholarly Publication and Communication Practices. Research and Occasional Paper Series: CSHE.13.06

ERIC Educational Resources Information Center

Harley, Diane; Earl-Novell, Sarah; Arter, Jennifer; Lawrence, Shannon; King, C. Judson

2006-01-01

This study reports on five disciplinary case studies that explore academic value systems as they influence publishing behavior and attitudes of University of California, Berkeley faculty. The case studies are based on direct interviews with relevant stakeholders--faculty, advancement reviewers, librarians, and editors--in five fields: chemical…

Keeping Teachers in the Center: A Framework of Data-Driven Decision-Making

ERIC Educational Resources Information Center

Light, Daniel; Wexler, Dara H.; Heinze, Juliette

2004-01-01

The Education Development Center's Center for Children and Technology (CCT) conducted a three year study of a large-scale data reporting system, developed by the Grow Network for New York City's Department of Education. This paper presents a framework based on two years of research exploring the intersection of decision-support technologies,…

YF-12 Experiments Symposium, Volume 1

NASA Technical Reports Server (NTRS)

1978-01-01

Papers presented by personnel from the Dryden Flight Research Center, the Lewis Research Center, and the Ames Research Center are presented. Topics cover propulsion system performance, inlet time varying distortion, structures, aircraft controls, propulsion controls, and aerodynamics. The reports were based on analytical studies, laboratory experiments, wind tunnel tests, and extensive flight research with two YF-12 airplanes.

A Web Based Intelligent Training System for SMEs

ERIC Educational Resources Information Center

Mullins, Roisin; Duan, Yanqing; Hamblin, David; Burrell, Phillip; Jin, Huan; Jerzy, Goluchowski; Ewa, Ziemba; Aleksander, Billewicz

2007-01-01

It is widely accepted that employees in small business suffer from a lack of knowledge and skills. This lack of skills means that small companies will miss out on new business opportunities. This is even more evident with respect to the adoption of Internet marketing in Small and Medium Enterprises (SMEs). This paper reports a pilot research…

Effectiveness and Utility of Terminal Tablet as Electric Textbooks for Nursing Practicum

ERIC Educational Resources Information Center

Nakamura, Yumiko; Fukayama, Kaori; Majima, Yukie

2015-01-01

Based on the Nursing Learning Support System, which was developed and tested by our university, this study developed the "Digital Nursing Dictionary (ver. 2)," a terminal tablet with a new function of an electronic books, by taking advantage of the developed ICT. This paper describes an interim report of the results of those assessments.…

What makes dissatisfied state park campers?

Treesearch

Malcolm I. Bevins

1992-01-01

This paper reports the findings of a joint project of the University of Vermont and the Vermont Department of Forests and Parks. The goal of the project was to develop a reliable system for monitoring camper satisfaction. Camper complaints were translated into demerits based upon the rated importance of the complaint. The summation of demerits was correlated with the...

Designing Flight Deck Procedures

NASA Technical Reports Server (NTRS)

Degani, Asaf; Wiener, Earl

2005-01-01

Three reports address the design of flight-deck procedures and various aspects of human interaction with cockpit systems that have direct impact on flight safety. One report, On the Typography of Flight- Deck Documentation, discusses basic research about typography and the kind of information needed by designers of flight deck documentation. Flight crews reading poorly designed documentation may easily overlook a crucial item on the checklist. The report surveys and summarizes the available literature regarding the design and typographical aspects of printed material. It focuses on typographical factors such as proper typefaces, character height, use of lower- and upper-case characters, line length, and spacing. Graphical aspects such as layout, color coding, fonts, and character contrast are discussed; and several cockpit conditions such as lighting levels and glare are addressed, as well as usage factors such as angular alignment, paper quality, and colors. Most of the insights and recommendations discussed in this report are transferable to paperless cockpit systems of the future and computer-based procedure displays (e.g., "electronic flight bag") in aerospace systems and similar systems that are used in other industries such as medical, nuclear systems, maritime operations, and military systems.

Effectively marketing prepaid medical care with decision support systems.

PubMed

Forgionne, G A

1991-01-01

The paper reports a decision support system (DSS) that enables health plan administrators to quickly and easily: (1) manage relevant medical care market (consumer preference and competitors' program) information and (2) convert the information into appropriate medical care delivery and/or payment policies. As the paper demonstrates, the DSS enables providers to design cost efficient and market effective medical care programs. The DSS provides knowledge about subscriber preferences, customer desires, and the program offerings of the competition. It then helps administrators structure a medical care plan in a way that best meets consumer needs in view of the competition. This market effective plan has the potential to generate substantial amounts of additional revenue for the program. Since the system's data base consists mainly of the provider's records, routine transactions, and other readily available documents, the DSS can be implemented at a nominal incremental cost. The paper also evaluates the impact of the information system on the general financial performance of existing dental and mental health plans. In addition, the paper examines how the system can help contain the cost of providing medical care while providing better services to more potential beneficiaries than current approaches.

Coordination of a complex welfare system case: rehabilitation entity in Finland.

PubMed

Miettinen, Sari; Ashorn, Ulla; Lehto, Juhani; Viitanen, Elina

2011-01-01

The main purpose of this article is to analyse the institutional and political structures of the Finnish rehabilitation entity and the governmental efforts to improve the governance of the rehabilitation policy. Rehabilitation in Finland is a complex welfare system which has undergone several coordination attempts during the last two decades. The centrality of the coordination of this welfare system is obvious. Based on the content analysis of three Government's rehabilitation reports from 1994 to 2002 and their background papers, this article provides two main findings. First, the rehabilitation entity seems to be based on different funding strategies, different governing and different coordination models between the rehabilitation subsystems. Second, the governance discourse in the reports seems to be unchanging with a predominantly hierarchical mode. The article concludes with a discussion on the challenges to coordinate this kind of a complex welfare system as an entity and also how to overcome those challenges. Copyright © 2010 John Wiley & Sons, Ltd.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Munganahalli, D.

Sedco Forex is a drilling contractor that operates approximately 80 rigs on land and offshore worldwide. The HSE management system developed by Sedco Forex is an effort to prevent accidents and minimize losses. An integral part of the HSE management system is establishing risk profiles and thereby minimizing risk and reducing loss exposures. Risk profiles are established based on accident reports, potential accident reports and other risk identification reports (RIR) like the Du Pont STOP system. A rig could fill in as many as 30 accident reports, 30 potential accident reports and 500 STOP cards each year. Statistics are importantmore » for an HSE management system, since they are indicators of success or failure of HSE systems. It is however difficult to establish risk profiles based on statistical information, unless tools are available at the rig site to aid with the analysis. Risk profiles are then used to identify important areas in the operation that may require specific attention to minimize the loss exposure. Programs to address the loss exposure can then be identified and implemented with either a local or corporate approach. In January 1995, Sedco Forex implemented a uniform HSE Database on all the rigs worldwide. In one year companywide, the HSE database would contain information on approximately 500 accident and potential accident reports, and 10,000 STOP cards. This paper demonstrates the salient features of the database and describes how it has helped in establishing key risk profiles. It also shows a recent example of how risk profiles have been established at the corporate level and used to identify the key contributing factors to hands and finger injuries. Based on this information, a campaign was launched to minimize the frequency of occurrence and associated loss attributed to hands and fingers accidents.« less

Ca2+-Regulated Photoproteins: Effective Immunoassay Reporters

PubMed Central

Frank, Ludmila A.

2010-01-01

Ca2+-regulated photoproteins of luminous marine coelenterates are of interest and a challenge for researchers as a unique bioluminescent system and as a promising analytical instrument for both in vivo and in vitro applications. The proteins are comprehensively studied as to biochemical properties, tertiary structures, bioluminescence mechanism, etc. This knowledge, along with available recombinant proteins serves the basis for development of unique bioluminescent detection systems that are “self-contained”, triggerable, fast, highly sensitive, and non-hazardous. In the paper, we focus on the use of photoproteins as reporters in binding assays based on immunological recognition element—bioluminescent immunoassay and hybridization immunoassay, their advantages and prospects. PMID:22163526

A web-based referral system for neurosurgery--a solution to our problems?

PubMed

Choo, Melissa C; Thennakon, Shyamica; Shapey, Jonathan; Tolias, Christos M

2011-06-01

Accurate handover is very important in the running of all modern neurosurgical units. Referrals are notoriously difficult to track and review due to poor quality of written paper-based recorded information for handover (illegibility, incomplete paper trail, repetition of information and loss of patients). We have recently introduced a web-based referral system to three of our referring hospitals. To review the experience of a tertiary neurosurgical unit in using the UK's first real time online referral system and to discuss its strengths and weaknesses in comparison to the currently used written paper-based referral system. A retrospective analysis of all paper-based referrals made to our unit in March 2009, compared to 14 months' referrals through the web system. Patterns of information recorded in both systems were investigated and advantages and disadvantages of each identified. One hundred ninety-six patients were referred using the online system, 483 using the traditional method. Significant problems of illegibility and missing information were identified with the paper-based referrals. In comparison, 100% documentation was achieved with the online referral system. Only 63% penetrance in the best performing trust was found using the online system, with significant delays in responding to referrals. Traditional written paper-based referrals do not provide an acceptable level of documentation. We present our experience and difficulties implementing a web-based system to address this. Although our data are unable to show improved patient care, we believe the potential benefits of a fully integrated system may offer a solution.

Generation of recombinant rotaviruses expressing fluorescent proteins using an optimized reverse genetics system.

PubMed

Komoto, Satoshi; Fukuda, Saori; Ide, Tomihiko; Ito, Naoto; Sugiyama, Makoto; Yoshikawa, Tetsushi; Murata, Takayuki; Taniguchi, Koki

2018-04-18

An entirely plasmid-based reverse genetics system for rotaviruses was established very recently. We improved the reverse genetics system to generate recombinant rotavirus by transfecting only 11 cDNA plasmids for its 11 gene segments under the condition of increasing the ratio of the cDNA plasmids for NSP2 and NSP5 genes. Utilizing this highly efficient system, we then engineered infectious recombinant rotaviruses expressing bioluminescent (NanoLuc luciferase) and fluorescent (EGFP and mCherry) reporters. These recombinant rotaviruses expressing reporters remained genetically stable during serial passages. Our reverse genetics approach and recombinant rotaviruses carrying reporter genes will be great additions to the tool kit for studying the molecular virology of rotavirus, and for developing future next-generation vaccines and expression vectors. IMPORTANCE Rotavirus is one of the most important pathogens causing severe gastroenteritis in young children worldwide. In this paper, we describe a robust and simple reverse genetics system based on only rotavirus cDNAs, and its application for engineering infectious recombinant rotaviruses harboring bioluminescent (NanoLuc) and fluorescent (EGFP and mCherry) protein genes. This highly efficient reverse genetics system and recombinant RVAs expressing reporters could be powerful tools for the study of different aspects of rotavirus replication. Furthermore, they may be useful for next-generation vaccine production for this medically important virus. Copyright © 2018 American Society for Microbiology.

A Resonant Synchronous Vibration Based Approach for Rotor Imbalance Detection

NASA Technical Reports Server (NTRS)

Luo, Huangeng; Rodriquez, Hector; Hallman, Darren; Lewicki, David G.

2006-01-01

This paper presents a methodology of detecting rotor imbalances, such as mass imbalance and crack-induced imbalance, using shaft synchronous vibrations. An iterative scheme is developed to identify parameters from measured synchronous vibration data. A detection system is integrated by using state-of-the-art commercial analysis equipment. A laboratory rotor test rig is used to verify the system integration and algorithm validation. A real engine test has been carried out and the results are reported.

Software dependability in the Tandem GUARDIAN system

NASA Technical Reports Server (NTRS)

Lee, Inhwan; Iyer, Ravishankar K.

1995-01-01

Based on extensive field failure data for Tandem's GUARDIAN operating system this paper discusses evaluation of the dependability of operational software. Software faults considered are major defects that result in processor failures and invoke backup processes to take over. The paper categorizes the underlying causes of software failures and evaluates the effectiveness of the process pair technique in tolerating software faults. A model to describe the impact of software faults on the reliability of an overall system is proposed. The model is used to evaluate the significance of key factors that determine software dependability and to identify areas for improvement. An analysis of the data shows that about 77% of processor failures that are initially considered due to software are confirmed as software problems. The analysis shows that the use of process pairs to provide checkpointing and restart (originally intended for tolerating hardware faults) allows the system to tolerate about 75% of reported software faults that result in processor failures. The loose coupling between processors, which results in the backup execution (the processor state and the sequence of events) being different from the original execution, is a major reason for the measured software fault tolerance. Over two-thirds (72%) of measured software failures are recurrences of previously reported faults. Modeling, based on the data, shows that, in addition to reducing the number of software faults, software dependability can be enhanced by reducing the recurrence rate.

A novel symbiotic organisms search algorithm for congestion management in deregulated environment

NASA Astrophysics Data System (ADS)

Verma, Sumit; Saha, Subhodip; Mukherjee, V.

2017-01-01

In today's competitive electricity market, managing transmission congestion in deregulated power system has created challenges for independent system operators to operate the transmission lines reliably within the limits. This paper proposes a new meta-heuristic algorithm, called as symbiotic organisms search (SOS) algorithm, for congestion management (CM) problem in pool based electricity market by real power rescheduling of generators. Inspired by interactions among organisms in ecosystem, SOS algorithm is a recent population based algorithm which does not require any algorithm specific control parameters unlike other algorithms. Various security constraints such as load bus voltage and line loading are taken into account while dealing with the CM problem. In this paper, the proposed SOS algorithm is applied on modified IEEE 30- and 57-bus test power system for the solution of CM problem. The results, thus, obtained are compared to those reported in the recent state-of-the-art literature. The efficacy of the proposed SOS algorithm for obtaining the higher quality solution is also established.

A novel symbiotic organisms search algorithm for congestion management in deregulated environment

NASA Astrophysics Data System (ADS)

Verma, Sumit; Saha, Subhodip; Mukherjee, V.

2017-01-01

In today's competitive electricity market, managing transmission congestion in deregulated power system has created challenges for independent system operators to operate the transmission lines reliably within the limits. This paper proposes a new meta-heuristic algorithm, called as symbiotic organisms search (SOS) algorithm, for congestion management (CM) problem in pool-based electricity market by real power rescheduling of generators. Inspired by interactions among organisms in ecosystem, SOS algorithm is a recent population-based algorithm which does not require any algorithm specific control parameters unlike other algorithms. Various security constraints such as load bus voltage and line loading are taken into account while dealing with the CM problem. In this paper, the proposed SOS algorithm is applied on modified IEEE 30- and 57-bus test power system for the solution of CM problem. The results, thus, obtained are compared to those reported in the recent state-of-the-art literature. The efficacy of the proposed SOS algorithm for obtaining the higher quality solution is also established.

Improving the efficiency of a user-driven learning system with reconfigurable hardware. Application to DNA splicing.

PubMed

Lemoine, E; Merceron, D; Sallantin, J; Nguifo, E M

1999-01-01

This paper describes a new approach to problem solving by splitting up problem component parts between software and hardware. Our main idea arises from the combination of two previously published works. The first one proposed a conceptual environment of concept modelling in which the machine and the human expert interact. The second one reported an algorithm based on reconfigurable hardware system which outperforms any kind of previously published genetic data base scanning hardware or algorithms. Here we show how efficient the interaction between the machine and the expert is when the concept modelling is based on reconfigurable hardware system. Their cooperation is thus achieved with an real time interaction speed. The designed system has been partially applied to the recognition of primate splice junctions sites in genetic sequences.

Study on corporate social responsibility evaluation system based on stakeholder theory

NASA Astrophysics Data System (ADS)

Ma, J.; Deng, Liming

2011-10-01

The issue of Corporate Social Responsibility (CSR) has been attracting the attention from many disciplines such as economics, management, laws, sociality and philosophy since last century. The purpose of this study is to explore the impact of CSR on performance and develop a CSR evaluation system. Building on the definition of CSR and Stakeholder theory, this article built a path-relationship model of CSR and business operation performance. The paper also constructed CSR evaluation system based on KLD index, GRJ report, CSR accounting account, SA8000, ISO14000 etc. The research provides a basis for future studies about the relationship between CSR and business performance and shed some light on the evaluation of CSR practices.

Characterization of Early Age Curing and Shrinkage of Metakaolin-Based Inorganic Binders with Different Rheological Behavior by Fiber Bragg Grating Sensors.

PubMed

Palumbo, Giovanna; Iadicicco, Agostino; Messina, Francesco; Ferone, Claudio; Campopiano, Stefania; Cioffi, Raffaele; Colangelo, Francesco

2017-12-22

This paper reports results related to early age temperature and shrinkage measurements by means fiber Bragg gratings (FBGs), which were embedded in geopolymer matrices. The sensors were properly packaged in order to discriminate between different shrinkage behavior and temperature development. Geopolymer systems based on metakaolin were investigated, which dealt with different commercial aluminosilicate precursors and siliceous filler contents. The proposed measuring system will allow us to control, in a very accurate way, the early age phases of the binding systems made by metakaolin geopolymer. A series of experiments were conducted on different compositions; moreover, rheological issues related to the proposed experimental method were also assessed.

Noncoherent Doppler tracking: first flight results

NASA Astrophysics Data System (ADS)

DeBoy, Christopher C.; Robert Jensen, J.; Asher, Mark S.

2005-01-01

Noncoherent Doppler tracking has been devised as a means to achieve highly accurate, two-way Doppler measurements with a simple, transceiver-based communications system. This technique has been flown as an experiment on the Thermosphere, Ionosphere, Mesosphere, Energetics and Dynamics (TIMED) spacecraft, (launched 7 December 2001), as the operational technique for Doppler tracking on CONTOUR, and is baselined on several future deep space missions at JHU/APL. This paper reports on initial results from a series of successful tests of this technique between the TIMED spacecraft and NASA ground stations in the Deep Space Network. It also examines the advantages that noncoherent Doppler tracking and a transceiver-based system may offer to small satellite systems, including reduced cost, mass, and power.

Biosensing for the protection of water quality

DOE Office of Scientific and Technical Information (OSTI.GOV)

Firth, B.K.; Cieslek, P.R.

1990-04-01

This paper reports that Weyerhaeuser's Rothschild sulfite pulp and paper facility produces approximately 150 a.d. tons/day of pulp and 350 tons/day of fine paper. The wastewater receives secondary treatment in an activated sludge system for removing solids and reducing the biochemical oxygen demand (BOD{sub 5}). The BOD{sub 5} is reduced nearly 98% across the secondary system. The final effluent is discharged into the Wisconsin River. After extensive field work, the Wisconsin Dept. of Natural Resources (DNR) developed the Qual III model to represent the assimilative capacity of the Wisconsin River. Using both the Qual III model and guidelines set forthmore » in Section 208 of the Water Pollution Control Act of 1972 (PL 92-500), the agency developed allocations restricting the discharge of BOD{sub 5} wasteload. This paper reports that as a result of the DNR modeling, the Rothschild facility has been under a variable restriction on BOD{sub 5} since 1983. The restrictive period is May through October, with daily BOD{sub 5} discharge limits of between 1360 and 7711 kg/day. Discharge limits change daily based on the receiving water flow, the water temperature, and the allocation period. Industrial companies that discharge effluent to the Wisconsin River system have a serious problem when the river flow is moderated to low and their final effluent BOD{sub 5} loadings begin to approach the wasteload limits.« less

A Novel Electronic Data Collection System for Large-Scale Surveys of Neglected Tropical Diseases

PubMed Central

King, Jonathan D.; Buolamwini, Joy; Cromwell, Elizabeth A.; Panfel, Andrew; Teferi, Tesfaye; Zerihun, Mulat; Melak, Berhanu; Watson, Jessica; Tadesse, Zerihun; Vienneau, Danielle; Ngondi, Jeremiah; Utzinger, Jürg; Odermatt, Peter; Emerson, Paul M.

2013-01-01

Background Large cross-sectional household surveys are common for measuring indicators of neglected tropical disease control programs. As an alternative to standard paper-based data collection, we utilized novel paperless technology to collect data electronically from over 12,000 households in Ethiopia. Methodology We conducted a needs assessment to design an Android-based electronic data collection and management system. We then evaluated the system by reporting results of a pilot trial and from comparisons of two, large-scale surveys; one with traditional paper questionnaires and the other with tablet computers, including accuracy, person-time days, and costs incurred. Principle Findings The electronic data collection system met core functions in household surveys and overcame constraints identified in the needs assessment. Pilot data recorders took 264 (standard deviation (SD) 152 sec) and 260 sec (SD 122 sec) per person registered to complete household surveys using paper and tablets, respectively (P = 0.77). Data recorders felt a lack of connection with the interviewee during the first days using electronic devices, but preferred to collect data electronically in future surveys. Electronic data collection saved time by giving results immediately, obviating the need for double data entry and cross-correcting. The proportion of identified data entry errors in disease classification did not differ between the two data collection methods. Geographic coordinates collected using the tablets were more accurate than coordinates transcribed on a paper form. Costs of the equipment required for electronic data collection was approximately the same cost incurred for data entry of questionnaires, whereas repeated use of the electronic equipment may increase cost savings. Conclusions/Significance Conducting a needs assessment and pilot testing allowed the design to specifically match the functionality required for surveys. Electronic data collection using an Android-based technology was suitable for a large-scale health survey, saved time, provided more accurate geo-coordinates, and was preferred by recorders over standard paper-based questionnaires. PMID:24066147

340nm UV LED excitation in time-resolved fluorescence system for europium-based immunoassays detection

NASA Astrophysics Data System (ADS)

Rodenko, Olga; Fodgaard, Henrik; Tidemand-Lichtenberg, Peter; Pedersen, Christian

2017-02-01

In immunoassay analyzers for in-vitro diagnostics, Xenon flash lamps have been widely used as excitation light sources. Recent advancements in UV LED technology and its advantages over the flash lamps such as smaller footprint, better wall-plug efficiency, narrow emission spectrum, and no significant afterglow, have made them attractive light sources for gated detection systems. In this paper, we report on the implementation of a 340 nm UV LED based time-resolved fluorescence system based on europium chelate as a fluorescent marker. The system performance was tested with the immunoassay based on the cardiac marker, TnI. The same signal-to-noise ratio as for the flash lamp based system was obtained, operating the LED below specified maximum current. The background counts of the system and its main contributors were measured and analyzed. The background of the system of the LED based unit was improved by 39% compared to that of the Xenon flash lamp based unit, due to the LEDs narrower emission spectrum and longer pulse width. Key parameters of the LED system are discussed to further optimize the signal-to-noise ratio and signal-to-background, and hence the sensitivity of the instrument.

BIM authoring for an image-based bridge maintenance system of existing cable-supported bridges

NASA Astrophysics Data System (ADS)

Dang, N. S.; Shim, C. S.

2018-04-01

Infrastructure nowadays is increasingly become the main backbone for the metropolitan development in general. Along with the rise of new facilities, the demand in term of maintenance for the existing bridges is indispensable. Recently, the terminology of “preventive maintenance” is not unfamiliar with the engineer, literally is the use of a bridge maintenance system (BMS) based on a BIM-oriented model. In this paper, the process of generating a BMS based on BIM model is introduced in detail. Data management for this BMS is separated into two modules: site inspection system and information management system. The noteworthy aspect of this model lays on the closed and automatic process of “capture image, generate the technical damage report, and upload/feedback to the BMS” in real-time. A pilot BMS system for a cable-supported bridge is presented which showed a good performance and potential to further development of preventive maintenance.

A ZigBee-based wireless system for monitoring vital signs in hyperbaric chambers: Technical report.

PubMed

Carmona, Cristian; Alorda, Bartomeu; Gracia, Luis; Perez-Vidal, Carlos; Salinas, Antonio

2017-01-01

This paper presents the replacement of a traditional wired communication link of the hyperbaric chambers with a wireless ZigBee-based system. This move allows a reduction in the costs of seals capable of withstanding the internal pressures and gives rise to a more versatile system. The new system is able to capture and process individual vital signs like the electrocardiography signal, and other analog sources, sending the data to an external computer and allowing analysis, representation and sharing with medical staff. This system solves such problems as the attenuation of the signal produced by the metal walls of the hyperbaric chamber and has a coverage area large enough to manage up to six patients with an effective data rate conversion of 2kHz. Furthermore, a battery-based and multiparameter platform is designed for multipatient hyperbaric chambers. Copyright© Undersea and Hyperbaric Medical Society.

Wavelet and Multiresolution Analysis for Finite Element Networking Paradigms

NASA Technical Reports Server (NTRS)

Kurdila, Andrew J.; Sharpley, Robert C.

1999-01-01

This paper presents a final report on Wavelet and Multiresolution Analysis for Finite Element Networking Paradigms. The focus of this research is to derive and implement: 1) Wavelet based methodologies for the compression, transmission, decoding, and visualization of three dimensional finite element geometry and simulation data in a network environment; 2) methodologies for interactive algorithm monitoring and tracking in computational mechanics; and 3) Methodologies for interactive algorithm steering for the acceleration of large scale finite element simulations. Also included in this report are appendices describing the derivation of wavelet based Particle Image Velocity algorithms and reduced order input-output models for nonlinear systems by utilizing wavelet approximations.

Mathematical modelling of the human cardiovascular system in the presence of stenosis

NASA Technical Reports Server (NTRS)

Sud, V. K.; Srinivasan, R. S.; Charles, J. B.; Bungo, M. W.

1993-01-01

This paper reports a theoretical study on the distribution of blood flow in the human cardiovascular system when one or more blood vessels are affected by stenosis. The analysis employs a mathematical model of the entire system based on the finite element method. The arterial-venous network is represented by a large number of interconnected segments in the model. Values for the model parameters are based upon the published data on the physiological and rheological properties of blood. Computational results show how blood flow through various parts of the cardiovascular system is affected by stenosis in different blood vessels. No significant changes in the flow parameters of the cardiovascular system were found to occur when the reduction in the lumen diameter of the stenosed vessels was less than 65%.

Performance assessment in brain-computer interface-based augmentative and alternative communication

PubMed Central

2013-01-01

A large number of incommensurable metrics are currently used to report the performance of brain-computer interfaces (BCI) used for augmentative and alterative communication (AAC). The lack of standard metrics precludes the comparison of different BCI-based AAC systems, hindering rapid growth and development of this technology. This paper presents a review of the metrics that have been used to report performance of BCIs used for AAC from January 2005 to January 2012. We distinguish between Level 1 metrics used to report performance at the output of the BCI Control Module, which translates brain signals into logical control output, and Level 2 metrics at the Selection Enhancement Module, which translates logical control to semantic control. We recommend that: (1) the commensurate metrics Mutual Information or Information Transfer Rate (ITR) be used to report Level 1 BCI performance, as these metrics represent information throughput, which is of interest in BCIs for AAC; 2) the BCI-Utility metric be used to report Level 2 BCI performance, as it is capable of handling all current methods of improving BCI performance; (3) these metrics should be supplemented by information specific to each unique BCI configuration; and (4) studies involving Selection Enhancement Modules should report performance at both Level 1 and Level 2 in the BCI system. Following these recommendations will enable efficient comparison between both BCI Control and Selection Enhancement Modules, accelerating research and development of BCI-based AAC systems. PMID:23680020

A prototype implementation of a network-level intrusion detection system. Technical report number CS91-11

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heady, R.; Luger, G.F.; Maccabe, A.B.

1991-05-15

This paper presents the implementation of a prototype network level intrusion detection system. The prototype system monitors base level information in network packets (source, destination, packet size, time, and network protocol), learning the normal patterns and announcing anomalies as they occur. The goal of this research is to determine the applicability of current intrusion detection technology to the detection of network level intrusions. In particular, the authors are investigating the possibility of using this technology to detect and react to worm programs.

Visual interaction: models, systems, prototypes. The Pictorial Computing Laboratory at the University of Rome La Sapienza.

PubMed

Bottoni, Paolo; Cinque, Luigi; De Marsico, Maria; Levialdi, Stefano; Panizzi, Emanuele

2006-06-01

This paper reports on the research activities performed by the Pictorial Computing Laboratory at the University of Rome, La Sapienza, during the last 5 years. Such work, essentially is based on the study of humancomputer interaction, spans from metamodels of interaction down to prototypes of interactive systems for both synchronous multimedia communication and groupwork, annotation systems for web pages, also encompassing theoretical and practical issues of visual languages and environments also including pattern recognition algorithms. Some applications are also considered like e-learning and collaborative work.

Rescheduling with iterative repair

NASA Technical Reports Server (NTRS)

Zweben, Monte; Davis, Eugene; Daun, Brian; Deale, Michael

1992-01-01

This paper presents a new approach to rescheduling called constraint-based iterative repair. This approach gives our system the ability to satisfy domain constraints, address optimization concerns, minimize perturbation to the original schedule, and produce modified schedules quickly. The system begins with an initial, flawed schedule and then iteratively repairs constraint violations until a conflict-free schedule is produced. In an empirical demonstration, we vary the importance of minimizing perturbation and report how fast the system is able to resolve conflicts in a given time bound. These experiments were performed within the domain of Space Shuttle ground processing.

Variable Coded Modulation software simulation

NASA Astrophysics Data System (ADS)

Sielicki, Thomas A.; Hamkins, Jon; Thorsen, Denise

This paper reports on the design and performance of a new Variable Coded Modulation (VCM) system. This VCM system comprises eight of NASA's recommended codes from the Consultative Committee for Space Data Systems (CCSDS) standards, including four turbo and four AR4JA/C2 low-density parity-check codes, together with six modulations types (BPSK, QPSK, 8-PSK, 16-APSK, 32-APSK, 64-APSK). The signaling protocol for the transmission mode is based on a CCSDS recommendation. The coded modulation may be dynamically chosen, block to block, to optimize throughput.

Beyond the online catalog: developing an academic information system in the sciences.

PubMed Central

Crawford, S; Halbrook, B; Kelly, E; Stucki, L

1987-01-01

The online public access catalog consists essentially of a machine-readable database with network capabilities. Like other computer-based information systems, it may be continuously enhanced by the addition of new capabilities and databases. It may also become a gateway to other information networks. This paper reports the evolution of the Bibliographic Access and Control System (BACS) of Washington University in end-user searching, current awareness services, information management, and administrative functions. Ongoing research and development and the future of the online catalog are also discussed. PMID:3315052

Beyond the online catalog: developing an academic information system in the sciences.

PubMed

Crawford, S; Halbrook, B; Kelly, E; Stucki, L

1987-07-01

The online public access catalog consists essentially of a machine-readable database with network capabilities. Like other computer-based information systems, it may be continuously enhanced by the addition of new capabilities and databases. It may also become a gateway to other information networks. This paper reports the evolution of the Bibliographic Access and Control System (BACS) of Washington University in end-user searching, current awareness services, information management, and administrative functions. Ongoing research and development and the future of the online catalog are also discussed.

A tensor approach to modeling of nonhomogeneous nonlinear systems

NASA Technical Reports Server (NTRS)

Yurkovich, S.; Sain, M.

1980-01-01

Model following control methodology plays a key role in numerous application areas. Cases in point include flight control systems and gas turbine engine control systems. Typical uses of such a design strategy involve the determination of nonlinear models which generate requested control and response trajectories for various commands. Linear multivariable techniques provide trim about these motions; and protection logic is added to secure the hardware from excursions beyond the specification range. This paper reports upon experience in developing a general class of such nonlinear models based upon the idea of the algebraic tensor product.

Intelligent hypertext systems for aerospace engineering applications

NASA Technical Reports Server (NTRS)

Lo, Ching F.

1989-01-01

This paper is a progress report on the utilization of AI technology for assisting users locating and understanding technical information in manuals used for planning and conducting wind tunnel test. The specific goal is to create an Intelligent Hypertext System (IHS) for wind tunnel testing which combines the computerized manual in the form of hypertext and an advisory system that stores experts' knowledge and experiences. A prototype IHS for conducting transonic wind tunnel testing has been constructed with limited knowledge base. The prototype is being evaluated by potential users.

Meta-expert system for cargo container screening

NASA Astrophysics Data System (ADS)

Alberts, David S.

1994-02-01

This paper reports upon improvements and extensions of rule-based expert systems and related technologies in the context of their application to the cargo container screening problem. These innovations have been incorporated into a system built for and deployed by U.S. Customs with funding provided by the DCI's Counter Narcotics Committee. Given the serious nature of the drug smuggling threat and the low probability of intercept, the ability to target the extremely limited inspectional resources available to U.S. Customs is a prerequisite for success in fighting the `Drug War.'

Benchmarking hardware architecture candidates for the NFIRAOS real-time controller

NASA Astrophysics Data System (ADS)

Smith, Malcolm; Kerley, Dan; Herriot, Glen; Véran, Jean-Pierre

2014-07-01

As a part of the trade study for the Narrow Field Infrared Adaptive Optics System, the adaptive optics system for the Thirty Meter Telescope, we investigated the feasibility of performing real-time control computation using a Linux operating system and Intel Xeon E5 CPUs. We also investigated a Xeon Phi based architecture which allows higher levels of parallelism. This paper summarizes both the CPU based real-time controller architecture and the Xeon Phi based RTC. The Intel Xeon E5 CPU solution meets the requirements and performs the computation for one AO cycle in an average of 767 microseconds. The Xeon Phi solution did not meet the 1200 microsecond time requirement and also suffered from unpredictable execution times. More detailed benchmark results are reported for both architectures.

The system evaluation for report writing skills of summary by HGA-SVM with Ontology: Medical case study in problem based learning

NASA Astrophysics Data System (ADS)

Yenaeng, Sasikanchana; Saelee, Somkid; Samai, Wirachai

2018-01-01

The system evaluation for report writing skills of summary by Hybrid Genetic Algorithm-Support Vector Machines (HGA-SVM) with Ontology of Medical Case Study in Problem Based Learning (PBL) is a system was developed as a guideline of scoring for the facilitators or medical teacher. The essay answers come from medical student of medical education courses in the nervous system motion and Behavior I and II subject, a third year medical student 20 groups of 9-10 people, the Faculty of Medicine in Prince of Songkla University (PSU). The audit committee have the opinion that the ratings of individual facilitators are inadequate, this system to solve such problems. In this paper proposes a development of the system evaluation for report writing skills of summary by HGA-SVM with Ontology of medical case study in PBL which the mean scores of machine learning score and humans (facilitators) score were not different at the significantly level .05 all 3 essay parts contain problem essay part, hypothesis essay part and learning objective essay part. The result show that, the average score all 3 essay parts that were not significantly different from the rate at the level of significance .05.

Performance of a fail-safe system to follow up abnormal mammograms in primary care.

PubMed

Grossman, Ellie; Phillips, Russell S; Weingart, Saul N

2010-09-01

Missed and delayed breast cancer diagnoses are major sources of potential harm to patients and medical malpractice liability in the United States. Follow-up of abnormal mammogram results is an essential but challenging component of safe breast care. To explore the value of an inexpensive method to follow up abnormal test results, we examined a paper-based fail-safe system. We examined a fail-safe system used to follow up abnormal mammograms at a primary care practice at an urban teaching hospital. We analyzed all abnormal mammogram reports and clinicians' responses to follow-up reminders. We characterized potential lapses identified in this system and used regression models to identify patient, provider, and test result characteristics associated with such lapses. Clinicians responded to fail-safe reminders for 92% of 948 abnormal mammograms. Clinicians reported that they were unaware of the abnormal result in 8% of cases and that there was no follow-up plan in place for 3% of cases. Clinicians with more years of experience were more likely to be aware of the abnormal result (odds of being unaware per incremental year in practice, 0.92; 95% confidence interval, 0.88-0.97) and were more likely to have a follow-up plan. A paper-based fail-safe system for abnormal mammograms is feasible in a primary care practice. However, special care is warranted to ensure full clinician adherence and address staff transitions and trainee-related issues.

Image-based tracking: a new emerging standard

NASA Astrophysics Data System (ADS)

Antonisse, Jim; Randall, Scott

2012-06-01

Automated moving object detection and tracking are increasingly viewed as solutions to the enormous data volumes resulting from emerging wide-area persistent surveillance systems. In a previous paper we described a Motion Imagery Standards Board (MISB) initiative to help address this problem: the specification of a micro-architecture for the automatic extraction of motion indicators and tracks. This paper reports on the development of an extended specification of the plug-and-play tracking micro-architecture, on its status as an emerging standard across DoD, the Intelligence Community, and NATO.

Irradiation control parameters for computer-assisted laser photocoagulation of the retina

NASA Astrophysics Data System (ADS)

Naess, Espen; Molvik, Torstein; Barrett, Steven F.; Wright, Cameron H. G.; de Graaf, Peter W.

2001-06-01

A system for robotically assisted retinal surgery has been developed to rapidly and safely place lesions on the retina for photocoagulation therapy. This system provides real- time, motion stabilized lesion placement for typical irradiation times of 100 ms. The system consists of three main subsystems: a global, digital-based tracking subsystem; a fast, local analog tracking subsystem; and a confocal reflectance subsystem to control lesion parameters dynamically. We have reported on these subsystems in previous SPIE presentations. This paper concentrates on the development of the second hybrid system prototype. Considerable progress has been made toward reducing the footprint of the optical system, simplifying the user interface, fully characterizing the analog tracking system and using measurable lesion reflectance growth parameters to develop a noninvasive method to infer lesion depth. This method will allow dynamic control of laser dosimetry to provide similar lesions across the non-uniform retinal surface. These system improvements and progress toward a clinically significant system are covered in detail within this paper.

The Fleet Application for Scheduling and Tracking (FAST) Management Website

NASA Technical Reports Server (NTRS)

Marrero-Perez, Radames J.

2014-01-01

The FAST application was designed to replace the paper and pen method of checking out and checking in GSA Vehicles at KSC. By innovating from a paper and pen based checkout system to a fully digital one, not only the resources wasted by printing the checkout forms have been reduced, but it also reduces significantly the time that users and fleet managers need to interact with the system as well as improving the record accuracy for each vehicle. The vehicle information is pulled from a centralized database server in the SPSDL. In an attempt to add a new feature to the FAST application, the author of this report (alongside the FAST developers) has been designing and developing the FAST Management Website. The GSA fleet managers had to rely on the FAST developers in order to add new vehicles, edit vehicles and previous transactions, or for generating vehicles reports. By providing an easy-to-use FAST Management Website portal, the GSA fleet managers are now able to easily move vehicles, edit records, and print reports.

Surgical treatment of hepatocellular carcinoma: evidence-based outcomes.

PubMed

Yamazaki, Shintaro; Takayama, Tadatoshi

2008-02-07

Surgeons may be severely criticized from the perspective of evidence-based medicine because the majority of surgical publications appear not to be convincing. In the top nine surgical journals in 1996, half of the 175 publications refer to pilot studies lacking a control group, 18% to animal experiments, and only 5% to randomized controlled trials (RCT). There are five levels of clinical evidence: level 1 (randomized controlled trial), level 2 (prospective concurrent cohort study), level 3 (retrospective historical cohort study), level 4 (pre-post study), and level 5 (case report). Recently, a Japanese evidence-based guideline for the surgical treatment of hepatocellular carcinoma (HCC) was made by a committee (Chairman, Professor Makuuchi and five members). We searched the literature using the Medline Dialog System with four keywords: HCC, surgery, English papers, in the last 20 years. A total of 915 publications were identified systematically reviewed. At the first selection (in which surgery-dominant papers were selected), 478 papers survived. In the second selection (clearly concluded papers), 181 papers survived. In the final selection (clinically significant papers), 100 papers survived. The evidence level of the 100 surviving papers is shown here: level-1 papers (13%), level-2 papers (11%), level-3 papers (52%), and level-4 papers (24%); therefore, there were 24% prospective papers and 76% retrospective papers. Here, we present a part of the guideline on the five main surgical issues: indication to operation, operative procedure, peri-operative care, prognostic factor, and post-operative adjuvant therapy.

Surgical treatment of hepatocellular carcinoma: Evidence-based outcomes

PubMed Central

Yamazaki, Shintaro; Takayama, Tadatoshi

2008-01-01

Surgeons may be severely criticized from the perspective of evidence-based medicine because the majority of surgical publications appear not to be convincing. In the top nine surgical journals in 1996, half of the 175 publications refer to pilot studies lacking a control group, 18% to animal experiments, and only 5% to randomized controlled trials (RCT). There are five levels of clinical evidence: level 1 (randomized controlled trial), level 2 (prospective concurrent cohort study), level 3 (retrospective historical cohort study), level 4 (pre-post study), and level 5 (case report). Recently, a Japanese evidence-based guideline for the surgical treatment of hepatocellular carcinoma (HCC) was made by a committee (Chairman, Professor Makuuchi and five members). We searched the literature using the Medline Dialog System with four keywords: HCC, surgery, English papers, in the last 20 years. A total of 915 publications were identified systematically reviewed. At the first selection (in which surgery-dominant papers were selected), 478 papers survived. In the second selection (clearly concluded papers), 181 papers survived. In the final selection (clinically significant papers), 100 papers survived. The evidence level of the 100 surviving papers is shown here: level-1 papers (13%), level-2 papers (11%), level-3 papers (52%), and level-4 papers (24%); therefore, there were 24% prospective papers and 76% retrospective papers. Here, we present a part of the guideline on the five main surgical issues: indication to operation, operative procedure, peri-operative care, prognostic factor, and post-operative adjuvant therapy. PMID:18205256

Autonomous Driver Based on an Intelligent System of Decision-Making.

PubMed

Czubenko, Michał; Kowalczuk, Zdzisław; Ordys, Andrew

The paper presents and discusses a system ( xDriver ) which uses an Intelligent System of Decision-making (ISD) for the task of car driving. The principal subject is the implementation, simulation and testing of the ISD system described earlier in our publications (Kowalczuk and Czubenko in artificial intelligence and soft computing lecture notes in computer science, lecture notes in artificial intelligence, Springer, Berlin, 2010, 2010, In Int J Appl Math Comput Sci 21(4):621-635, 2011, In Pomiary Autom Robot 2(17):60-5, 2013) for the task of autonomous driving. The design of the whole ISD system is a result of a thorough modelling of human psychology based on an extensive literature study. Concepts somehow similar to the ISD system can be found in the literature (Muhlestein in Cognit Comput 5(1):99-105, 2012; Wiggins in Cognit Comput 4(3):306-319, 2012), but there are no reports of a system which would model the human psychology for the purpose of autonomously driving a car. The paper describes assumptions for simulation, the set of needs and reactions (characterizing the ISD system), the road model and the vehicle model, as well as presents some results of simulation. It proves that the xDriver system may behave on the road as a very inexperienced driver.

Perceptions of the Feasibility and Practicalities of Text Messaging-Based Infectious Disease Surveillance: A Questionnaire Survey.

PubMed

Dang, Linh Thuy; Vu, Nguyen Cong; Vu, Thiem Dinh; James, Spencer L; Katona, Peter; Katona, Lindsay; Rosen, Joseph M; Nguyen, Cuong Kieu

2016-05-25

In Vietnam, infectious disease surveillance data are collected via a paper-based system through four government tiers leading to a large delay. Meanwhile, mobile phones are abundant and very popular in the country, and known to be a useful tool in health care worldwide. Therefore, there is a great potential for the development of a timely disease surveillance system through the use of mobile phone short message service (SMS) text messages. This study aims to explore insights about the feasibility and practicalities of the utilization of SMS text messaging-based interventions in disease-reporting systems by identifying potential challenges and barriers in the text messaging process and looking at lessons learned. An SMS text messaging-based disease tracking system was set up in Vietnam with patient reports texted by clinic staff. Two 6-month trials utilizing this disease tracking system were designed and implemented in two northern provinces of Vietnam to report two infectious diseases: diarrhea and influenza-like illness. A structured self-reported questionnaire was developed to measure the feasibility and practicalities of the system from the participants. On the completion of the second trial in 2013, participating health staff from 40 commune health centers in the two pilot provinces were asked to complete the survey (N=80). Most participants were female (61%, 49/80) and nearly half (44%, 35/80) were heads of a commune health center. Approximately two-thirds (63%, 50/80) of participants retained the basic structure of the SMS text message report and there was a strong influence (OR 28.2, 95% CI 5.3-151.2) of those people on the time they spent texting the information. The majority (88%, 70/80) felt the information conveyed in the SMS text message report was not difficult to understand. Most (86%, 69/80) believed that they could report all 28 infectious diseases asked for by the Ministry of Health by using SMS text messaging. From a health center staff perspective, a disease-reporting system utilizing text messaging technology is easy to use and has great potential to be implemented and expanded nationwide. The survey showed positive perceptions and feedback from the participants and contributed to a promising practical solution to improve the surveillance system of infectious disease in Vietnam.

2015-2016 Florida Adult Education Assessment Technical Assistance Paper

ERIC Educational Resources Information Center

Florida Department of Education, 2016

2016-01-01

This technical assistance paper provides guidance to individuals with test administration responsibilities in adult education programs. These policies apply to the approved assessments that programs may use to report educational gains in compliance with the National Reporting System (NRS) requirements. The NRS is the accountability system for the…

2016-2017 Florida Adult Education Assessment Technical Assistance Paper

ERIC Educational Resources Information Center

Florida Department of Education, 2017

2017-01-01

This technical assistance paper provides guidance to individuals with test administration responsibilities in adult education programs. These policies apply to the approved assessments that programs may use to report educational gains in compliance with the National Reporting System (NRS) requirements. The NRS is the accountability system for the…

Hand-held computer operating system program for collection of resident experience data.

PubMed

Malan, T K; Haffner, W H; Armstrong, A Y; Satin, A J

2000-11-01

To describe a system for recording resident experience involving hand-held computers with the Palm Operating System (3 Com, Inc., Santa Clara, CA). Hand-held personal computers (PCs) are popular, easy to use, inexpensive, portable, and can share data among other operating systems. Residents in our program carry individual hand-held database computers to record Residency Review Committee (RRC) reportable patient encounters. Each resident's data is transferred to a single central relational database compatible with Microsoft Access (Microsoft Corporation, Redmond, WA). Patient data entry and subsequent transfer to a central database is accomplished with commercially available software that requires minimal computer expertise to implement and maintain. The central database can then be used for statistical analysis or to create required RRC resident experience reports. As a result, the data collection and transfer process takes less time for residents and program director alike, than paper-based or central computer-based systems. The system of collecting resident encounter data using hand-held computers with the Palm Operating System is easy to use, relatively inexpensive, accurate, and secure. The user-friendly system provides prompt, complete, and accurate data, enhancing the education of residents while facilitating the job of the program director.

The capability of lithography simulation based on MVM-SEM® system

NASA Astrophysics Data System (ADS)

Yoshikawa, Shingo; Fujii, Nobuaki; Kanno, Koichi; Imai, Hidemichi; Hayano, Katsuya; Miyashita, Hiroyuki; Shida, Soichi; Murakawa, Tsutomu; Kuribara, Masayuki; Matsumoto, Jun; Nakamura, Takayuki; Matsushita, Shohei; Hara, Daisuke; Pang, Linyong

2015-10-01

The 1Xnm technology node lithography is using SMO-ILT, NTD or more complex pattern. Therefore in mask defect inspection, defect verification becomes more difficult because many nuisance defects are detected in aggressive mask feature. One key Technology of mask manufacture is defect verification to use aerial image simulator or other printability simulation. AIMS™ Technology is excellent correlation for the wafer and standards tool for defect verification however it is difficult for verification over hundred numbers or more. We reported capability of defect verification based on lithography simulation with a SEM system that architecture and software is excellent correlation for simple line and space.[1] In this paper, we use a SEM system for the next generation combined with a lithography simulation tool for SMO-ILT, NTD and other complex pattern lithography. Furthermore we will use three dimension (3D) lithography simulation based on Multi Vision Metrology SEM system. Finally, we will confirm the performance of the 2D and 3D lithography simulation based on SEM system for a photomask verification.

A cloud-based system for automatic glaucoma screening.

PubMed

Fengshou Yin; Damon Wing Kee Wong; Ying Quan; Ai Ping Yow; Ngan Meng Tan; Gopalakrishnan, Kavitha; Beng Hai Lee; Yanwu Xu; Zhuo Zhang; Jun Cheng; Jiang Liu

2015-08-01

In recent years, there has been increasing interest in the use of automatic computer-based systems for the detection of eye diseases including glaucoma. However, these systems are usually standalone software with basic functions only, limiting their usage in a large scale. In this paper, we introduce an online cloud-based system for automatic glaucoma screening through the use of medical image-based pattern classification technologies. It is designed in a hybrid cloud pattern to offer both accessibility and enhanced security. Raw data including patient's medical condition and fundus image, and resultant medical reports are collected and distributed through the public cloud tier. In the private cloud tier, automatic analysis and assessment of colour retinal fundus images are performed. The ubiquitous anywhere access nature of the system through the cloud platform facilitates a more efficient and cost-effective means of glaucoma screening, allowing the disease to be detected earlier and enabling early intervention for more efficient intervention and disease management.

Leveraging Electronic Tablets for General Pediatric Care

PubMed Central

McKee, S.; Dugan, T.M.; Downs, S.M.

2015-01-01

Summary Background We have previously shown that a scan-able paper based interface linked to a computerized clinical decision support system (CDSS) can effectively screen patients in pediatric waiting rooms and support the physician using evidence based care guidelines at the time of clinical encounter. However, the use of scan-able paper based interface has many inherent limitations including lacking real time communication with the CDSS and being prone to human and system errors. An electronic tablet based user interface can not only overcome these limitations, but may also support advanced functionality for clinical and research use. However, use of such devices for pediatric care is not well studied in clinical settings. Objective In this pilot study, we enhance our pediatric CDSS with an electronic tablet based user interface and evaluate it for usability as well as for changes in patient questionnaire completion rates. Methods Child Health Improvement through Computers Leveraging Electronic Tablets or CHICLET is an electronic tablet based user interface. It is developed to augment the existing scan-able paper interface to our CDSS. For the purposes of this study, we deployed CHICLET in one outpatient pediatric clinic. Usability factors for CHICLET were evaluated via caregiver and staff surveys. Results When compared to the scan-able paper based interface, we observed an 18% increase or 30% relative increase in question completion rates using CHICLET. This difference was statistically significant. Caregivers and staff survey results were positive for using CHICLET in clinical environment. Conclusions Electronic tablets are a viable interface for capturing patient self-report in pediatric waiting rooms. We further hypothesize that the use of electronic tablet based interfaces will drive advances in computerized clinical decision support and create opportunities for patient engagement. PMID:25848409

Monitoring wildlife-vehicle collisions in the information age: how smartphones can improve data collection.

PubMed

Olson, Daniel D; Bissonette, John A; Cramer, Patricia C; Green, Ashley D; Davis, Scott T; Jackson, Patrick J; Coster, Daniel C

2014-01-01

Currently there is a critical need for accurate and standardized wildlife-vehicle collision data, because it is the underpinning of mitigation projects that protect both drivers and wildlife. Gathering data can be challenging because wildlife-vehicle collisions occur over broad areas, during all seasons of the year, and in large numbers. Collecting data of this magnitude requires an efficient data collection system. Presently there is no widely adopted system that is both efficient and accurate. Our objective was to develop and test an integrated smartphone-based system for reporting wildlife-vehicle collision data. The WVC Reporter system we developed consisted of a mobile web application for data collection, a database for centralized storage of data, and a desktop web application for viewing data. The smartphones that we tested for use with the application produced accurate locations (median error = 4.6-5.2 m), and reduced location error 99% versus reporting only the highway/marker. Additionally, mean times for data entry using the mobile web application (22.0-26.5 s) were substantially shorter than using the pen/paper method (52 s). We also found the pen/paper method had a data entry error rate of 10% and those errors were virtually eliminated using the mobile web application. During the first year of use, 6,822 animal carcasses were reported using WVC Reporter. The desktop web application improved access to WVC data and allowed users to easily visualize wildlife-vehicle collision patterns at multiple scales. The WVC Reporter integrated several modern technologies into a seamless method for collecting, managing, and using WVC data. As a result, the system increased efficiency in reporting, improved accuracy, and enhanced visualization of data. The development costs for the system were minor relative to the potential benefits of having spatially accurate and temporally current wildlife-vehicle collision data.

Monitoring Wildlife-Vehicle Collisions in the Information Age: How Smartphones Can Improve Data Collection

PubMed Central

Olson, Daniel D.; Bissonette, John A.; Cramer, Patricia C.; Green, Ashley D.; Davis, Scott T.; Jackson, Patrick J.; Coster, Daniel C.

2014-01-01

Background Currently there is a critical need for accurate and standardized wildlife-vehicle collision data, because it is the underpinning of mitigation projects that protect both drivers and wildlife. Gathering data can be challenging because wildlife-vehicle collisions occur over broad areas, during all seasons of the year, and in large numbers. Collecting data of this magnitude requires an efficient data collection system. Presently there is no widely adopted system that is both efficient and accurate. Methodology/Principal Findings Our objective was to develop and test an integrated smartphone-based system for reporting wildlife-vehicle collision data. The WVC Reporter system we developed consisted of a mobile web application for data collection, a database for centralized storage of data, and a desktop web application for viewing data. The smartphones that we tested for use with the application produced accurate locations (median error = 4.6–5.2 m), and reduced location error 99% versus reporting only the highway/marker. Additionally, mean times for data entry using the mobile web application (22.0–26.5 s) were substantially shorter than using the pen/paper method (52 s). We also found the pen/paper method had a data entry error rate of 10% and those errors were virtually eliminated using the mobile web application. During the first year of use, 6,822 animal carcasses were reported using WVC Reporter. The desktop web application improved access to WVC data and allowed users to easily visualize wildlife-vehicle collision patterns at multiple scales. Conclusions/Significance The WVC Reporter integrated several modern technologies into a seamless method for collecting, managing, and using WVC data. As a result, the system increased efficiency in reporting, improved accuracy, and enhanced visualization of data. The development costs for the system were minor relative to the potential benefits of having spatially accurate and temporally current wildlife-vehicle collision data. PMID:24897502

Automatic Multilevel Parallelization Using OpenMP

NASA Technical Reports Server (NTRS)

Jin, Hao-Qiang; Jost, Gabriele; Yan, Jerry; Ayguade, Eduard; Gonzalez, Marc; Martorell, Xavier; Biegel, Bryan (Technical Monitor)

2002-01-01

In this paper we describe the extension of the CAPO parallelization support tool to support multilevel parallelism based on OpenMP directives. CAPO generates OpenMP directives with extensions supported by the NanosCompiler to allow for directive nesting and definition of thread groups. We report first results for several benchmark codes and one full application that have been parallelized using our system.

Locally Based Educational Research and Curriculum Development in Developing Countries - the Teacher's Role. IIEP Occasional Papers No. 40.

ERIC Educational Resources Information Center

Hawes, H. W. R.

This report examines the ability of teachers in developing countries to study their educational systems and to develop curriculum materials appropriate to local schools and local conditions, in the face of attitudes and policies frequently inconducive to innovative effort. Part one examines the need for involving teachers in research and survey…

Facilitating Student Learning in Distance Education: A Case Study on the Development and Implementation of a Multifaceted Feedback System

ERIC Educational Resources Information Center

Uribe, Samantha N.; Vaughan, Michelle

2017-01-01

This paper reports on a case study conducted in an American university investigating the role of feedback within a distance education environment. Based on data gathered from online and hybrid undergraduate students in a teacher education program and supported by existing research, we describe how we support online learners by implementing a…

Programs to Aid Unemployed Aerospace Professionals: Implications for Mid-Life Career Redirection.

ERIC Educational Resources Information Center

Thompson, Velma Montoya

The Rand paper on programs facilitating the mid-life career redirection of unemployed aerospace professionals is 1 of 20 policy-related research reports commissioned by the Division of Social Systems and Human Resources in the Research Applied to National Needs Program of the National Science Foundation. It is based on the evaluation of some 300…

The Impact of Achieve3000 on Elementary Literacy Outcomes: Evidence from a Two-Year Randomized Control Trial

ERIC Educational Resources Information Center

Hill, Darryl V.; Lenard, Matthew A.; Page, Lindsay Coleman

2016-01-01

School districts are increasingly adopting technology-based resources in an attempt to improve student achievement. This paper reports the two-year results from randomized control trial of Achieve3000 in the Wake County Public School System (WCPSS) in Raleigh, North Carolina. Achieve3000 is an early literacy program that differentiates non-fiction…

Towards the Development of a Comprehensive Pedagogical Framework for Pronunciation Training Based on Adapted Automatic Speech Recognition Systems

ERIC Educational Resources Information Center

Ali, Saandia

2016-01-01

This paper reports on the early stages of a locally funded research and development project taking place at Rennes 2 university. It aims at developing a comprehensive pedagogical framework for pronunciation training for adult learners of English. This framework will combine a direct approach to pronunciation training (face-to-face teaching) with…

Next-Generation Summative English Language Proficiency Assessments for English Learners: Priorities for Policy and Research. Research Report. ETS RR-16-08

ERIC Educational Resources Information Center

Wolf, Mikyung Kim; Guzman-Orth, Danielle; Hauck, Maurice Cogan

2016-01-01

This paper is the third in a series concerning English language proficiency (ELP) assessments for K-12 English learners (ELs). The series, produced from Educational Testing Service (ETS), is intended to provide theory- and evidence-based principles and recommendations for improving next-generation ELP assessment systems, policies, and practices…

CLOSSS: A Machine Readable Data Base of Social Science Serials, Progress Report, 1971-1972. Working Paper No. 8.

ERIC Educational Resources Information Center

Roberts, S. A.; Bradshaw, R. G.

Deisgn of Information Systems in the Social Sciences (DISISS) is a research project conducted to describe the main characteristics of the literature of the social sciences using bibliometric techniques. A comprehensive machine readable file of social science serials was developed which is called CLOSSS (Check List of Social Science Serials). Data…

The Progress of CDAS

NASA Technical Reports Server (NTRS)

Zhu, Renjie; Zhang, Xiuzhong; Wei, Wenren; Xiang, Ying; Li, Bin; Wu, Yajun; Shu, Fengchun; Luo, Jintao; Wang, Jinqing; Xue, Zhuhe;

Initial animal studies of a wireless, batteryless, MEMS implant for cardiovascular applications.

PubMed

Najafi, Nader; Ludomirsky, Achiau

2004-03-01

This paper reports the results of the initial animal studies of a wireless, batteryless, implantable pressure sensor using microelectromechanical systems (MEMS) technology. The animal studies were acute and proved the functional feasibility of using MEMS technology for wireless bio sensing. The results are very encouraging and surpassed the majority of the application's requirements, including high sampling speed and high resolution. Based on the lessons learned, second generation wireless sensors are being developed that will provide total system solution.

A solar light driven dual photoelectrode photocatalytic fuel cell (PFC) for simultaneous wastewater treatment and electricity generation.

PubMed

Bai, Jing; Wang, Rui; Li, Yunpo; Tang, Yuanyuan; Zeng, Qingyi; Xia, Ligang; Li, Xuejin; Li, Jinhua; Li, Caolong; Zhou, Baoxue

2016-07-05

In this paper, a novel dual heterojunction Photocatalytic Fuel Cell (PFC) system based on BiVO4/TiO2 nanotubes/FTO photoanode and ZnO/CuO nanowires/FTO photocathode has been designed. Compared with the electrodes in PFCs reported in earlier literatures, the proposed heterojunction not only enhances the visible light absorption but also offers a higher photoconversion efficiency. In addition, the nanostructured heterojunction owns a large surface area that ensures a large amount of active sites for organics degradation. The performance of the PFC base on the dual photoelectrodes was also studied herein. The results indicated that the PFC in ths paper exhibits a superior performance and its JV(max) reached 0.116 mw cm(-2), which is higher than that in most of reported PFCs with a Pt-free photocathode. When hazardous organic compounds such as methyl orange, Congo red and methylene blue were decomposed, the degradation rates obtained is to be 76%, 83%, and 90% respectively after 80 mins reaction. The proposed heterojunction photoelectrodes provided great potential for cost-effective and high-efficiency organic pollutants degradation and electricity generation in a PFC system. Copyright © 2016 Elsevier B.V. All rights reserved.

Fiscal year 1979 scientific and technical reports, articles, papers and presentations

NASA Technical Reports Server (NTRS)

White, O. L. (Compiler)

1979-01-01

This bibliography lists approximately 590 formal NASA technical reports, papers published in technical journals, presentations by MSFC personnel, and reports of MSFC contractors introduced into the NASA scientific and technical information system in 1979.

The Dynamic Aviation Data System (DADS).

PubMed

Soman, S; Strome, T; Francescutti, L H

1997-08-01

This paper proposes The Dynamic Aviation Data System (DADS), which integrates a variety of existing information sources regarding flight to serve as a tool to pilots in dealing with the challenges of flight. The system is composed of three main parts: a pilot's history on disk; a system that can read proposed flight plans and make suggestions based upon Geographical Information Systems, weather, aircraft, and case report databases that exist throughout North America; and a small hand-held computer that interfaces with the aircraft's instruments and that can be brought into the cockpit to aid the pilot before and during flight. The system is based upon technology that currently exists and information that is already regularly collected. While many issues regarding implementation and cost efficiency of the system need to be addressed, the system shows promise in its ability to make useful flight safety information available to all pilots in order to save lives.

The FoReVer Methodology: A MBSE Framework for Formal Verification

NASA Astrophysics Data System (ADS)

Baracchi, Laura; Mazzini, Silvia; Cimatti, Alessandro; Tonetta, Stefano; Garcia, Gerald

2013-08-01

The need for high level of confidence and operational integrity in critical space (software) systems is well recognized in the Space industry and has been addressed so far through rigorous System and Software Development Processes and stringent Verification and Validation regimes. The Model Based Space System Engineering process (MBSSE) derived in the System and Software Functional Requirement Techniques study (SSFRT) focused on the application of model based engineering technologies to support the space system and software development processes, from mission level requirements to software implementation through model refinements and translations. In this paper we report on our work in the ESA-funded FoReVer project where we aim at developing methodological, theoretical and technological support for a systematic approach to the space avionics system development, in phases 0/A/B/C. FoReVer enriches the MBSSE process with contract-based formal verification of properties, at different stages from system to software, through a step-wise refinement approach, with the support for a Software Reference Architecture.

Immunity-Based Aircraft Fault Detection System

NASA Technical Reports Server (NTRS)

Dasgupta, D.; KrishnaKumar, K.; Wong, D.; Berry, M.

2004-01-01

In the study reported in this paper, we have developed and applied an Artificial Immune System (AIS) algorithm for aircraft fault detection, as an extension to a previous work on intelligent flight control (IFC). Though the prior studies had established the benefits of IFC, one area of weakness that needed to be strengthened was the control dead band induced by commanding a failed surface. Since the IFC approach uses fault accommodation with no detection, the dead band, although it reduces over time due to learning, is present and causes degradation in handling qualities. If the failure can be identified, this dead band can be further A ed to ensure rapid fault accommodation and better handling qualities. The paper describes the application of an immunity-based approach that can detect a broad spectrum of known and unforeseen failures. The approach incorporates the knowledge of the normal operational behavior of the aircraft from sensory data, and probabilistically generates a set of pattern detectors that can detect any abnormalities (including faults) in the behavior pattern indicating unsafe in-flight operation. We developed a tool called MILD (Multi-level Immune Learning Detection) based on a real-valued negative selection algorithm that can generate a small number of specialized detectors (as signatures of known failure conditions) and a larger set of generalized detectors for unknown (or possible) fault conditions. Once the fault is detected and identified, an adaptive control system would use this detection information to stabilize the aircraft by utilizing available resources (control surfaces). We experimented with data sets collected under normal and various simulated failure conditions using a piloted motion-base simulation facility. The reported results are from a collection of test cases that reflect the performance of the proposed immunity-based fault detection algorithm.

Medical decision-making inspired from aerospace multisensor data fusion concepts.

PubMed

Pombo, Nuno; Bousson, Kouamana; Araújo, Pedro; Viana, Joaquim

2015-01-01

In recent years, Internet-delivered treatments have been largely used for pain monitoring, offering healthcare professionals and patients the ability to interact anywhere and at any time. Electronic diaries have been increasingly adopted as the preferred methodology to collect data related to pain intensity and symptoms, replacing traditional pen-and-paper diaries. This article presents a multisensor data fusion methodology based on the capabilities provided by aerospace systems to evaluate the effects of electronic and pen-and-paper diaries on pain. We examined English-language studies of randomized controlled trials that use computerized systems and the Internet to collect data about chronic pain complaints. These studies were obtained from three data sources: BioMed Central, PubMed Central and ScienceDirect from the year 2000 until 30 June 2012. Based on comparisons of the reported pain intensity collected during pre- and post-treatment in both the control and intervention groups, the proposed multisensor data fusion model revealed that the benefits of technology and pen-and-paper are qualitatively equivalent [Formula: see text]. We conclude that the proposed model is suitable, intelligible, easy to implement, time efficient and resource efficient.

Assessment of the quality of reporting in abstracts of systematic reviews with meta-analyses in periodontology and implant dentistry.

PubMed

Faggion, C M; Liu, J; Huda, F; Atieh, M

2014-04-01

Proper scientific reporting is necessary to ensure the correct interpretation of study results by readers. The main objective of this study was to assess the quality of reporting in abstracts of systematic reviews (SRs) with meta-analyses in periodontology and implant dentistry. Differences in reporting of abstracts in Cochrane and paper-based reviews were also assessed. The PubMed electronic database and the Cochrane database for SRs were searched on November 11, 2012, independently and in duplicate, for SRs with meta-analyses related to interventions in periodontology and implant dentistry. Assessment of the quality of reporting was performed independently and in duplicate, taking into account items related to the effect direction, numerical estimates of effect size, measures of precision, probability and consistency. We initially screened 433 papers and included 146 (127 paper-based and 19 Cochrane reviews, respectively). The direction of evidence was reported in two-thirds of the abstracts while strength of evidence and measure of precision (i.e., confidence interval) were reported in less than half the selected abstracts. Measures of consistency such as I(2) statistics were reported in only 5% of the selected sample of abstracts. Cochrane abstracts reported the limitations of evidence and precision better than paper-based ones. Two items ("meta-analysis" in title and abstract, respectively), were nevertheless better reported in paper-based abstracts. Abstracts of SRs with meta-analyses in periodontology and implant dentistry currently have no uniform standard of reporting, which may hinder readers' understanding of study outcomes. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Starworld: Preparing Accountants for the Future: A Case-Based Approach to Teach International Financial Reporting Standards Using ERP Software

ERIC Educational Resources Information Center

Ragan, Joseph M.; Savino, Christopher J.; Parashac, Paul; Hosler, Jonathan C.

2010-01-01

International Financial Reporting Standards now constitute an important part of educating young professional accountants. This paper looks at a case based process to teach International Financial Reporting Standards using integrated Enterprise Resource Planning software. The case contained within the paper can be used within a variety of courses…

Using TELOS for the planning of the information system audit

NASA Astrophysics Data System (ADS)

Drljaca, D. P.; Latinovic, B.

2018-01-01

This paper intent is to analyse different aspects of information system audit and to synthesise them into the feasibility study report in order to facilitate decision making and planning of information system audit process. The TELOS methodology provides a comprehensive and holistic review for making feasibility study in general. This paper examines the use of TELOS in the identification of possible factors that may influence the decision on implementing information system audit. The research question relates to TELOS provision of sufficient information to decision makers to plan an information system audit. It was found that the TELOS methodology can be successfully applied in the process of approving and planning of information system audit. The five aspects of the feasibility study, if performed objectively, can provide sufficient information to decision makers to commission an information system audit, and also contribute better planning of the audit. Using TELOS methodology can assure evidence-based and cost-effective decision-making process and facilitate planning of the audit. The paper proposes an original approach, not examined until now. It is usual to use TELOS for different purposes and when there is a need for conveying of the feasibility study, but not in the planning of the information system audit. This gives originality to the paper and opens further research questions about evaluation of the feasibility study and possible research on comparative and complementary methodologies.

New photosensitive systems for volume phase holography

NASA Astrophysics Data System (ADS)

Bianco, Andrea; Colella, Letizia; Galli, Paola; Zanutta, Alessio; Bertarelli, Chiara

2017-05-01

Volume phase holographic elements are becoming attractive thanks to the large efficiency and good optical quality. They are based on photosensitive materials where a modulation of the refractive index is induced. In this paper, we highlight the strategies to obtain a change in the refractive index in a dielectric material, namely a change in the material density and/or in the molecular polarizability. Moreover, we show the results achieved for materials that undergo the photo-Fries reaction as function of the molecular structure and the illumination conditions. We also report the results on a system based on the diazo Meldrum's acid where volatile molecules are produced upon light exposure.

Technology and testing.

PubMed

Quellmalz, Edys S; Pellegrino, James W

2009-01-02

Large-scale testing of educational outcomes benefits already from technological applications that address logistics such as development, administration, and scoring of tests, as well as reporting of results. Innovative applications of technology also provide rich, authentic tasks that challenge the sorts of integrated knowledge, critical thinking, and problem solving seldom well addressed in paper-based tests. Such tasks can be used on both large-scale and classroom-based assessments. Balanced assessment systems can be developed that integrate curriculum-embedded, benchmark, and summative assessments across classroom, district, state, national, and international levels. We discuss here the potential of technology to launch a new era of integrated, learning-centered assessment systems.

A medical informatics perspective on clinical decision support systems. Findings from the yearbook 2013 section on decision support.

PubMed

Bouaud, J; Lamy, J-B

2013-01-01

To summarize excellent research and to select best papers published in 2012 in the field of computer-based decision support in healthcare. A bibliographic search focused on clinical decision support systems (CDSSs) and computer provider order entry was performed, followed by a double-blind literature review. The review process yielded six papers, illustrating various aspects of clinical decision support. The first paper is a systematic review of CDSS intervention trials in real settings, and considers different types of possible outcomes. It emphasizes the heterogeneity of studies and confirms that CDSSs can improve process measures but that evidence lacks for other types of outcomes, especially clinical or economic. Four other papers tackle the safety of drug prescribing and show that CDSSs can be efficient in reducing prescription errors. The sixth paper exemplifies the growing role of ontological resources which can be used for several applications including decision support. CDSS research has to be continuously developed and assessed. The wide variety of systems and of interventions limits the understanding of factors of success of CDSS implementations. A standardization in the characterization of CDSSs and of intervention trial reporting will help to overcome this obstacle.

Low-cost three-dimensional millimeter-wave holographic imaging system based on a frequency-scanning antenna.

PubMed

Amin Nili, Vahid; Mansouri, Ehsan; Kavehvash, Zahra; Fakharzadeh, Mohammad; Shabany, Mahdi; Khavasi, Amin

2018-01-01

In this paper, a closed-form two-dimensional reconstruction technique for hybrid frequency and mechanical scanning millimeter-wave (MMW) imaging systems is proposed. Although being commercially implemented in many imaging systems as a low-cost real-time solution, the results of frequency scanning systems have been reconstructed numerically or have been reported as the captured raw data with no clear details. Furthermore, this paper proposes a new framework to utilize the captured data of different frequencies for three-dimensional (3D) reconstruction based on novel proposed closed-form relations. The hybrid frequency and mechanical scanning structure, together with the proposed reconstruction method, yields a low-cost MMW imaging system with a satisfying performance. The extracted reconstruction formulations are validated through numerical simulations, which show comparable image quality with conventional MMW imaging systems, i.e., switched-array (SA) and phased-array (PA) structures. Extensive simulations are also performed in the presence of additive noise, demonstrating the acceptable robustness of the system against system noise compared to SA and comparable performance with PA. Finally, 3D reconstruction of the simulated data shows a depth resolution of better than 10 cm with minimum degradation of lateral resolution in the 10 GHz frequency bandwidth.

A real-time spectroscopic sensor for monitoring laser welding processes.

PubMed

Sibillano, Teresa; Ancona, Antonio; Berardi, Vincenzo; Lugarà, Pietro Mario

2009-01-01

In this paper we report on the development of a sensor for real time monitoring of laser welding processes based on spectroscopic techniques. The system is based on the acquisition of the optical spectra emitted from the laser generated plasma plume and their use to implement an on-line algorithm for both the calculation of the plasma electron temperature and the analysis of the correlations between selected spectral lines. The sensor has been patented and it is currently available on the market.

Representing Human Expertise by the OWL Web Ontology Language to Support Knowledge Engineering in Decision Support Systems.

PubMed

Ramzan, Asia; Wang, Hai; Buckingham, Christopher

2014-01-01

Clinical decision support systems (CDSSs) often base their knowledge and advice on human expertise. Knowledge representation needs to be in a format that can be easily understood by human users as well as supporting ongoing knowledge engineering, including evolution and consistency of knowledge. This paper reports on the development of an ontology specification for managing knowledge engineering in a CDSS for assessing and managing risks associated with mental-health problems. The Galatean Risk and Safety Tool, GRiST, represents mental-health expertise in the form of a psychological model of classification. The hierarchical structure was directly represented in the machine using an XML document. Functionality of the model and knowledge management were controlled using attributes in the XML nodes, with an accompanying paper manual for specifying how end-user tools should behave when interfacing with the XML. This paper explains the advantages of using the web-ontology language, OWL, as the specification, details some of the issues and problems encountered in translating the psychological model to OWL, and shows how OWL benefits knowledge engineering. The conclusions are that OWL can have an important role in managing complex knowledge domains for systems based on human expertise without impeding the end-users' understanding of the knowledge base. The generic classification model underpinning GRiST makes it applicable to many decision domains and the accompanying OWL specification facilitates its implementation.

Improving rates of screening and prevention by leveraging existing information systems.

PubMed

Neil, Nancy

2003-11-01

In 1997 Virginia Mason Health System (VMMC), a vertically integrated hospital and multispecialty group practice, had no process or system to deliver the right patient clinical data, in the right form, at the right place--when providers needed it for effective patient care. Without any new investment in technology, a work group of five individuals leveraged existing, primarily paper-based information systems to launch development and implementation of a provider prompting tool--a primary care and prevention (PCP) report--which prompted providers to complete screening, prevention, and disease management services at every patient appointment. The work group developed and pilot tested the report and created a mechanism by which the report could be delivered just in time before each patient's appointment. The report integrated information from independent appointment scheduling, laboratory results reporting, patient demographics, and billing data sources. MEASURING THE PCP REPORT'S IMPACT: The results of two separate analyses demonstrate improvement in rates of screening and prevention across VMMC soon after the PCP report became available. These results led senior leadership to make the PCP report's utilization a systemwide imperative. The PCP report is used by nearly all primary care providers as a prompt to complete screening, prevention, and disease management services at every patient appointment.

Analysis of decision fusion algorithms in handling uncertainties for integrated health monitoring systems

NASA Astrophysics Data System (ADS)

Zein-Sabatto, Saleh; Mikhail, Maged; Bodruzzaman, Mohammad; DeSimio, Martin; Derriso, Mark; Behbahani, Alireza

2012-06-01

It has been widely accepted that data fusion and information fusion methods can improve the accuracy and robustness of decision-making in structural health monitoring systems. It is arguably true nonetheless, that decision-level is equally beneficial when applied to integrated health monitoring systems. Several decisions at low-levels of abstraction may be produced by different decision-makers; however, decision-level fusion is required at the final stage of the process to provide accurate assessment about the health of the monitored system as a whole. An example of such integrated systems with complex decision-making scenarios is the integrated health monitoring of aircraft. Thorough understanding of the characteristics of the decision-fusion methodologies is a crucial step for successful implementation of such decision-fusion systems. In this paper, we have presented the major information fusion methodologies reported in the literature, i.e., probabilistic, evidential, and artificial intelligent based methods. The theoretical basis and characteristics of these methodologies are explained and their performances are analyzed. Second, candidate methods from the above fusion methodologies, i.e., Bayesian, Dempster-Shafer, and fuzzy logic algorithms are selected and their applications are extended to decisions fusion. Finally, fusion algorithms are developed based on the selected fusion methods and their performance are tested on decisions generated from synthetic data and from experimental data. Also in this paper, a modeling methodology, i.e. cloud model, for generating synthetic decisions is presented and used. Using the cloud model, both types of uncertainties; randomness and fuzziness, involved in real decision-making are modeled. Synthetic decisions are generated with an unbiased process and varying interaction complexities among decisions to provide for fair performance comparison of the selected decision-fusion algorithms. For verification purposes, implementation results of the developed fusion algorithms on structural health monitoring data collected from experimental tests are reported in this paper.

Early Childhood Education in Saudi Arabia: Report

ERIC Educational Resources Information Center

Rabaah, Alqassem; Doaa, Dashash; Asma, Alzahrani

2016-01-01

This paper reviewed the development of early childhood education (ECE) in Saudi Arabia and its strengths and weaknesses. The paper discusses the contextual background of Saudi Arabia, including its geography, demographics, social system, economy, political system and religion. In addition, the paper investigated the education system at large in…

Analysis of general aviation single-pilot IFR incident data obtained from the NASA Aviation Safety Reporting System

NASA Technical Reports Server (NTRS)

Bergeron, H. P.

1983-01-01

An analysis of incident data obtained from the NASA Aviation Safety Reporting System (ASRS) has been made to determine the problem areas in general aviation single-pilot IFR (SPIFR) operations. The Aviation Safety Reporting System data base is a compilation of voluntary reports of incidents from any person who has observed or been involved in an occurrence which was believed to have posed a threat to flight safety. This paper examines only those reported incidents specifically related to general aviation single-pilot IFR operations. The frequency of occurrence of factors related to the incidents was the criterion used to define significant problem areas and, hence, to suggest where research is needed. The data was cataloged into one of five major problem areas: (1) controller judgment and response problems, (2) pilot judgment and response problems, (3) air traffic control (ATC) intrafacility and interfacility conflicts, (4) ATC and pilot communication problems, and (5) IFR-VFR conflicts. In addition, several points common to all or most of the problems were observed and reported. These included human error, communications, procedures and rules, and work load.

Implementation of an Electronic Data Collection Tool to Monitor Nursing-Sensitive Indicators in a Large Academic Health Sciences Centre.

PubMed

Backman, Chantal; Vanderloo, Saskia; Momtahan, Kathy; d'Entremont, Barb; Freeman, Lisa; Kachuik, Lynn; Rossy, Dianne; Mille, Toba; Mojaverian, Naghmeh; Lemire-Rodger, Ginette; Forster, Alan

2015-09-01

Monitoring the quality of nursing care is essential to identify patients at risk, measure adherence to hospital policies and evaluate the effectiveness of best practice interventions. However, monitoring nursing-sensitive indicators (NSI) is a challenge. Prevalence surveys are one method used by some organizations to monitor NSI, which are patient outcomes that are directly affected by the quantity or quality of nursing care that the patient receives. The aim of this paper is to describe the development of an innovative electronic data collection tool to monitor NSI. In the preliminary development work, we designed a mobile computing application with pre-populated patient census information to collect the nursing quality data. In subsequent phases, we refined this process by designing an electronic trigger using The Ottawa Hospital's Patient Safety Learning System, which automatically generated a case report form for each inpatient based on the hospital's daily patient census on the day of the prevalence survey. Both of these electronic data collection tools were accessible on tablet computers, which substantially reduced data collection, analysis and reporting time compared to previous paper-based methods. The electronic trigger provided improved completeness of the data. This work leveraged the use of tablet computers combined with a web-based application for patient data collection at point of care. Overall, the electronic methods improved data completeness and timeliness compared to traditional paper-based methods. This initiative has resulted in the ability to collect and report on NSI organization-wide to advance decision-making support and identify quality improvement opportunities within the organization. Copyright © 2015 Longwoods Publishing.

A knowledge-based patient assessment system: conceptual and technical design.

PubMed Central

Reilly, C. A.; Zielstorff, R. D.; Fox, R. L.; O'Connell, E. M.; Carroll, D. L.; Conley, K. A.; Fitzgerald, P.; Eng, T. K.; Martin, A.; Zidik, C. M.; Segal, M.

2000-01-01

This paper describes the design of an inpatient patient assessment application that captures nursing assessment data using a wireless laptop computer. The primary aim of this system is to capture structured information for facilitating decision support and quality monitoring. The system also aims to improve efficiency of recording patient assessments, reduce costs, and improve discharge planning and early identification of patient learning needs. Object-oriented methods were used to elicit functional requirements and to model the proposed system. A tools-based development approach is being used to facilitate rapid development and easy modification of assessment items and rules for decision support. Criteria for evaluation include perceived utility by clinician users, validity of decision support rules, time spent recording assessments, and perceived utility of aggregate reports for quality monitoring. PMID:11079970

A knowledge-based patient assessment system: conceptual and technical design.

PubMed

Reilly, C A; Zielstorff, R D; Fox, R L; O'Connell, E M; Carroll, D L; Conley, K A; Fitzgerald, P; Eng, T K; Martin, A; Zidik, C M; Segal, M

2000-01-01

This paper describes the design of an inpatient patient assessment application that captures nursing assessment data using a wireless laptop computer. The primary aim of this system is to capture structured information for facilitating decision support and quality monitoring. The system also aims to improve efficiency of recording patient assessments, reduce costs, and improve discharge planning and early identification of patient learning needs. Object-oriented methods were used to elicit functional requirements and to model the proposed system. A tools-based development approach is being used to facilitate rapid development and easy modification of assessment items and rules for decision support. Criteria for evaluation include perceived utility by clinician users, validity of decision support rules, time spent recording assessments, and perceived utility of aggregate reports for quality monitoring.

[A computer-aided image diagnosis and study system].

PubMed

Li, Zhangyong; Xie, Zhengxiang

2004-08-01

The revolution in information processing, particularly the digitizing of medicine, has changed the medical study, work and management. This paper reports a method to design a system for computer-aided image diagnosis and study. Combined with some good idea of graph-text system and picture archives communicate system (PACS), the system was realized and used for "prescription through computer", "managing images" and "reading images under computer and helping the diagnosis". Also typical examples were constructed in a database and used to teach the beginners. The system was developed by the visual developing tools based on object oriented programming (OOP) and was carried into operation on the Windows 9X platform. The system possesses friendly man-machine interface.

Transitioning to Intel-based Linux Servers in the Payload Operations Integration Center

NASA Technical Reports Server (NTRS)

Guillebeau, P. L.

2004-01-01

The MSFC Payload Operations Integration Center (POIC) is the focal point for International Space Station (ISS) payload operations. The POIC contains the facilities, hardware, software and communication interface necessary to support payload operations. ISS ground system support for processing and display of real-time spacecraft and telemetry and command data has been operational for several years. The hardware components were reaching end of life and vendor costs were increasing while ISS budgets were becoming severely constrained. Therefore it has been necessary to migrate the Unix portions of our ground systems to commodity priced Intel-based Linux servers. hardware architecture including networks, data storage, and highly available resources. This paper will concentrate on the Linux migration implementation for the software portion of our ground system. The migration began with 3.5 million lines of code running on Unix platforms with separate servers for telemetry, command, Payload information management systems, web, system control, remote server interface and databases. The Intel-based system is scheduled to be available for initial operational use by August 2004 The overall migration to Intel-based Linux servers in the control center involves changes to the This paper will address the Linux migration study approach including the proof of concept, criticality of customer buy-in and importance of beginning with POSlX compliant code. It will focus on the development approach explaining the software lifecycle. Other aspects of development will be covered including phased implementation, interim milestones and metrics measurements and reporting mechanisms. This paper will also address the testing approach covering all levels of testing including development, development integration, IV&V, user beta testing and acceptance testing. Test results including performance numbers compared with Unix servers will be included. need for a smooth transition while maintaining real-time support. An important aspect of the paper will involve challenges and lessons learned. product compatibility, implications of phasing decisions and tracking of dependencies, particularly non- software dependencies. The paper will also discuss scheduling challenges providing real-time flight support during the migration and the requirement to incorporate in the migration changes being made simultaneously for flight support. This paper will also address the deployment approach including user involvement in testing and the , This includes COTS product compatibility, implications of phasing decisions and tracking of dependencies, particularly non- software dependencies. The paper will also discuss scheduling challenges providing real-time flight support during the migration and the requirement to incorporate in the migration changes being made simultaneously for flight support.

Gradient Projection Anti-windup Scheme on Constrained Planar LTI Systems

DTIC Science & Technology

2010-03-15

was recognized as a largely open problem in a recent survey paper . This report analyzes the properties of the GPAW scheme applied to an input...recent survey paper [2] that anti- windup compensation for nonlinear systems remains largely an open problem. To this end, [3] and relevant references...controllers, the solution of which was recognized as a largely open problem in a recent survey paper . This report analyzes the properties of the GPAW

A global, comprehensive review of literature related to paper recycling: A pressing need for a uniform system of terms and definitions.

PubMed

Ervasti, Ilpo; Miranda, Ruben; Kauranen, Ilkka

2016-02-01

A global, comprehensive review of terms and definitions related to paper recycling was conducted in this article. Terms and definitions related to paper recycling have varied in the course of time. Different terms and different definitions for the same thing are being used in different geographical regions and by different organizations. Definitions are different based on varying conceptions of waste paper as a raw material. Definitions of how to make various calculations related to paper recycling activity are inconsistent. Even such fundamental basic definitions like how to calculate recycling rate and paper consumption are not uniform. It could be concluded that there is no uniform system of terms and definitions related to paper recycling and the implications of this deficiency are profound. For example, it is difficult to reliably compare with each other statistics from different times and from different geographical regions. It is not possible to measure if targets for recycling activities are met if the terms describing the targets are not uniformly defined. In cases of reporting data for recycling targets, the lack of uniform terminology can, for example, impede the necessary transparency between different stakeholders and may allow for deception. The authors conclude there is a pressing need to develop a uniform system of terms and definition for terms related to paper recycling. Copyright © 2015 Elsevier Ltd. All rights reserved.

Equivalence of electronic and paper-based patient-reported outcome measures.

PubMed

Campbell, Niloufar; Ali, Faraz; Finlay, Andrew Y; Salek, Sam S

2015-08-01

Electronic formats (ePROs) of paper-based patient-reported outcomes (PROs) should be validated before they can be reliably used. This review aimed to examine studies investigating measurement equivalence between ePROs and their paper originals to identify methodologies used and to determine the extent of such validation. Three databases (OvidSP, Web of Science and PubMed) were searched using a set of keywords. Results were examined for compliance with inclusion criteria. Articles or abstracts that directly compared screen-based electronic versions of PROs with their validated paper-based originals, with regard to their measurement equivalence, were included. Publications were excluded if the only instruments reported were stand-alone visual analogue scales or interactive voice response formats. Papers published before 2007 were excluded, as a previous meta-analysis examined papers published before this time. Fifty-five studies investigating 79 instruments met the inclusion criteria. 53 % of the 79 instruments studied were condition specific. Several instruments, such as the SF-36, were reported in more than one publication. The most frequently reported formats for ePROs were Web-based versions. In 78 % of the publications, there was evidence of equivalence or comparability between the two formats as judged by study authors. Of the 30 publications that provided preference data, 87 % found that overall participants preferred the electronic format. When examining equivalence between paper and electronic versions of PROs, formats are usually judged by authors to be equivalent. Participants prefer electronic formats. This literature review gives encouragement to the further widespread development and use of ePROs.

Econometric Models of Education, Some Applications. Education and Development, Technical Reports.

ERIC Educational Resources Information Center

Tinbergen, Jan; And Others

This report contains five papers which describe mathematical models of the educational system as it relates to economic growth. Experimental applications of the models to particular educational systems are discussed. Three papers, by L. J. Emmerij, J. Blum, and G. Williams, discuss planning models for the calculation of educational requirements…

Design and Implementation of an Underlay Control Channel for Cognitive Radios

DOE Office of Scientific and Technical Information (OSTI.GOV)

Daryl Wasden; Hussein Moradi; Behrouz Farhang-Boroujeny

Implementation of any cognitive radio network requires an effective control channel that can operate under various modes of activity from the primary users. This paper reports the design and implementation of a filter bank multicarrier spread spectrum (FBMC-SS) system for use as the control channel in cognitive radio networks. The proposed design is based on a filtered multitone (FMT) implementation. Carrier and timing acquisition and tracking methods as well as a blind channel estimation method are developed for the proposed control channel. We also report an implementation of the proposed FBMC-SS system on a hardware platform; a FlexRIO FPGA modulemore » from National Instruments.« less

Computer-Tailored Intervention for Juvenile Offenders

PubMed Central

LEVESQUE, DEBORAH A.; JOHNSON, JANET L.; WELCH, CAROL A.; PROCHASKA, JANICE M.; FERNANDEZ, ANNE C.

2012-01-01

Studies assessing the efficacy of juvenile justice interventions show small effects on recidivism and other outcomes. This paper describes the development of a prototype of a multimedia computer-tailored intervention (“Rise Above Your Situation”or RAYS) that relies on an evidence-based model of behavior change, the Transtheoretical Model, and expert system technology to deliver assessments, feedback, printed reports, and counselor reports with intervention ideas. In a feasibility test involving 60 system-involved youths and their counselors, evaluations of the program were favorable: 91.7% of youths agreed that the program could help them make positive changes, and 86.7% agreed that the program could give their counselor helpful information about them. PMID:23264754

A Recipe for Streamlining Mission Management

NASA Technical Reports Server (NTRS)

Mitchell, Andrew E.; Semancik, Susan K.

2004-01-01

This paper describes a project's design and implementation for streamlining mission management with knowledge capture processes across multiple organizations of a NASA directorate. Thc project's focus is on standardizing processes and reports; enabling secure information access and case of maintenance; automating and tracking appropriate workflow rules through process mapping; and infusing new technologies. This paper will describe a small team's experiences using XML technologies through an enhanced vendor suite of applications integrated on Windows-based platforms called the Wallops Integrated Scheduling and Document Management System (WISDMS). This paper describes our results using this system in a variety of endeavors, including providing range project scheduling and resource management for a Range and Mission Management Office; implementing an automated Customer Feedback system for a directorate; streamlining mission status reporting across a directorate; and initiating a document management, configuration management and portal access system for a Range Safety Office's programs. The end result is a reduction of the knowledge gap through better integration and distribution of information, improved process performance, automated metric gathering, and quicker identification of problem areas and issues. However, the real proof of the pudding comes through overcoming the user's reluctance to replace familiar, seasoned processes with new technology ingredients blended with automated procedures in an untested recipe. This paper shares some of the team's observations that led to better implementation techniques, as well as an IS0 9001 Best Practices citation. This project has provided a unique opportunity to advance NASA's competency in new technologies, as well as to strategically implement them within an organizational structure, while wetting the appetite for continued improvements in mission management.

On the utility of threads for data parallel programming

NASA Technical Reports Server (NTRS)

Fahringer, Thomas; Haines, Matthew; Mehrotra, Piyush

1995-01-01

Threads provide a useful programming model for asynchronous behavior because of their ability to encapsulate units of work that can then be scheduled for execution at runtime, based on the dynamic state of a system. Recently, the threaded model has been applied to the domain of data parallel scientific codes, and initial reports indicate that the threaded model can produce performance gains over non-threaded approaches, primarily through the use of overlapping useful computation with communication latency. However, overlapping computation with communication is possible without the benefit of threads if the communication system supports asynchronous primitives, and this comparison has not been made in previous papers. This paper provides a critical look at the utility of lightweight threads as applied to data parallel scientific programming.

The 1975 Ride Quality Symposium

NASA Technical Reports Server (NTRS)

1975-01-01

A compilation is presented of papers reported at the 1975 Ride Quality Symposium held in Williamsburg, Virginia, August 11-12, 1975. The symposium, jointly sponsored by NASA and the United States Department of Transportation, was held to provide a forum for determining the current state of the art relative to the technology base of ride quality information applicable to current and proposed transportation systems. Emphasis focused on passenger reactions to ride environment and on implications of these reactions to the design and operation of air, land, and water transportation systems acceptable to the traveling public. Papers are grouped in the following five categories: needs and uses for ride quality technology, vehicle environments and dynamics, investigative approaches and testing procedures, experimental ride quality studies, and ride quality modeling and criteria.

Characterization of Early Age Curing and Shrinkage of Metakaolin-Based Inorganic Binders with Different Rheological Behavior by Fiber Bragg Grating Sensors

PubMed Central

Palumbo, Giovanna; Iadicicco, Agostino; Messina, Francesco; Campopiano, Stefania; Cioffi, Raffaele; Colangelo, Francesco

2017-01-01

This paper reports results related to early age temperature and shrinkage measurements by means fiber Bragg gratings (FBGs), which were embedded in geopolymer matrices. The sensors were properly packaged in order to discriminate between different shrinkage behavior and temperature development. Geopolymer systems based on metakaolin were investigated, which dealt with different commercial aluminosilicate precursors and siliceous filler contents. The proposed measuring system will allow us to control, in a very accurate way, the early age phases of the binding systems made by metakaolin geopolymer. A series of experiments were conducted on different compositions; moreover, rheological issues related to the proposed experimental method were also assessed. PMID:29271912

A Possible Approach for Addressing Neglected Human Factors Issues of Systems Engineering

NASA Technical Reports Server (NTRS)

Johnson, Christopher W.; Holloway, C. Michael

2011-01-01

The increasing complexity of safety-critical applications has led to the introduction of decision support tools in the transportation and process industries. Automation has also been introduced to support operator intervention in safety-critical applications. These innovations help reduce overall operator workload, and filter application data to maximize the finite cognitive and perceptual resources of system operators. However, these benefits do not come without a cost. Increased computational support for the end-users of safety-critical applications leads to increased reliance on engineers to monitor and maintain automated systems and decision support tools. This paper argues that by focussing on the end-users of complex applications, previous research has tended to neglect the demands that are being placed on systems engineers. The argument is illustrated through discussing three recent accidents. The paper concludes by presenting a possible strategy for building and using highly automated systems based on increased attention by management and regulators, improvements in competency and training for technical staff, sustained support for engineering team resource management, and the development of incident reporting systems for infrastructure failures. This paper represents preliminary work, about which we seek comments and suggestions.

Cogeneration Technology Alternatives Study (CTAS). Volume 6: Computer data. Part 2: Residual-fired nocogeneration process boiler

NASA Technical Reports Server (NTRS)

Knightly, W. F.

1980-01-01

About fifty industrial processes from the largest energy consuming sectors were used as a basis for matching a similar number of energy conversion systems that are considered as candidate which can be made available by the 1985 to 2000 time period. The sectors considered included food, textiles, lumber, paper, chemicals, petroleum, glass, and primary metals. The energy conversion systems included steam and gas turbines, diesels, thermionics, stirling, closed cycle and steam injected gas turbines, and fuel cells. Fuels considered were coal, both coal and petroleum based residual and distillate liquid fuels, and low Btu gas obtained through the on site gasification of coal. Computer generated reports of the fuel consumption and savings, capital costs, economics and emissions of the cogeneration energy conversion systems (ECS's) heat and power matched to the individual industrial processes are presented. National fuel and emissions savings are also reported for each ECS assuming it alone is implemented. Two nocogeneration base cases are included: coal fired and residual fired process boilers.

Cogeneration Technology Alternatives Study (CTAS). Volume 6: Computer data. Part 1: Coal-fired nocogeneration process boiler, section A

NASA Technical Reports Server (NTRS)

Knightly, W. F.

1980-01-01

About fifty industrial processes from the largest energy consuming sectors were used as a basis for matching a similar number of energy conversion systems that are considered as candidate which can be made available by the 1985 to 2000 time period. The sectors considered included food, textiles, lumber, paper, chemicals, petroleum, glass, and primary metals. The energy conversion systems included steam and gas turbines, diesels, thermionics, stirling, closed cycle and steam injected gas turbines, and fuel cells. Fuels considered were coal, both coal and petroleum based residual and distillate liquid fuels, and low Btu gas obtained through the on site gasification of coal. Computer generated reports of the fuels consumption and savings, capital costs, economics and emissions of the cogeneration energy conversion systems (ECS's) heat and power matched to the individual industrial processes are presented. National fuel and emissions savings are also reported for each ECS assuming it alone is implemented. Two nocogeneration base cases are included: coal fired and residual fired process boilers.

Cogeneration Technology Alternatives Study (CTAS). Volume 6: Computer data. Part 1: Coal-fired nocogeneration process boiler, section B

NASA Technical Reports Server (NTRS)

Knightly, W. F.

1980-01-01

About fifty industrial processes from the largest energy consuming sectors were used as a basis for matching a similar number of energy conversion systems that are considered as candidate which can be made available by the 1985 to 2000 time period. The sectors considered included food, textiles, lumber, paper, chemicals, petroleum, glass, and primary metals. The energy conversion systems included steam and gas turbines, diesels, thermionics, stirling, closed cycle and steam injected gas turbines, and fuel cells. Fuels considered were coal, both coal and petroleum based residual and distillate liquid fuels, and low Btu gas obtained through the on site gasification of coal. Computer generated reports of the fuel consumption and savings, capital costs, economics and emissions of the cogeneration energy conversion systems (ECS's) heat and power matched to the individual industrial processes are presented. National fuel and emissions savings are also reported for each ECS assuming it alone is implemented. Two nocogeneration base cases are included: coal fired and residual fired process boilers.

Sublingual immunotherapy: World Allergy Organization position paper 2013 update.

PubMed

Canonica, Giorgio Walter; Cox, Linda; Pawankar, Ruby; Baena-Cagnani, Carlos E; Blaiss, Michael; Bonini, Sergio; Bousquet, Jean; Calderón, Moises; Compalati, Enrico; Durham, Stephen R; van Wijk, Roy Gerth; Larenas-Linnemann, Désirée; Nelson, Harold; Passalacqua, Giovanni; Pfaar, Oliver; Rosário, Nelson; Ryan, Dermot; Rosenwasser, Lanny; Schmid-Grendelmeier, Peter; Senna, Gianenrico; Valovirta, Erkka; Van Bever, Hugo; Vichyanond, Pakit; Wahn, Ulrich; Yusuf, Osman

2014-03-28

We have prepared this document, "Sublingual Immunotherapy: World Allergy Organization Position Paper 2013 Update", according to the evidence-based criteria, revising and updating chapters of the originally published paper, "Sublingual Immunotherapy: World Allergy Organization Position Paper 2009", available at http://www.waojournal.org. Namely, these comprise: "Mechanisms of sublingual immunotherapy;" "Clinical efficacy of sublingual immunotherapy" - reporting all the data of all controlled trials published after 2009; "Safety of sublingual immunotherapy" - with the recently published Grading System for adverse reactions; "Impact of sublingual immunotherapy on the natural history of respiratory allergy" - with the relevant evidences published since 2009; "Efficacy of SLIT in children" - with detailed analysis of all the studies; "Definition of SLIT patient selection" - reporting the criteria for eligibility to sublingual immunotherapy; "The future of immunotherapy in the community care setting"; "Methodology of clinical trials according to the current scientific and regulatory standards"; and "Guideline development: from evidence-based medicine to patients' views" - including the evolution of the methods to make clinical recommendations.Additionally, we have added new chapters to cover a few emerging crucial topics: "Practical aspects of schedules and dosages and counseling for adherence" - which is crucial in clinical practice for all treatments; "Perspectives and new approaches" - including recombinant allergens, adjuvants, modified allergens, and the concept of validity of the single products. Furthermore, "Raising public awareness about sublingual immunotherapy", as a need for our patients, and strategies to increase awareness of allergen immunotherapy (AIT) among patients, the medical community, all healthcare stakeholders, and public opinion, are also reported in detail.

Building the capacity of policy-makers and planners to strengthen mental health systems in low- and middle-income countries: a systematic review.

PubMed

Keynejad, Roxanne; Semrau, Maya; Toynbee, Mark; Evans-Lacko, Sara; Lund, Crick; Gureje, Oye; Ndyanabangi, Sheila; Courtin, Emilie; Abdulmalik, Jibril O; Alem, Atalay; Fekadu, Abebaw; Thornicroft, Graham; Hanlon, Charlotte

2016-10-21

Little is known about the interventions required to build the capacity of mental health policy-makers and planners in low- and middle-income countries (LMICs). We conducted a systematic review with the primary aim of identifying and synthesizing the evidence base for building the capacity of policy-makers and planners to strengthen mental health systems in LMICs. We searched MEDLINE, Embase, PsycINFO, Web of Knowledge, Web of Science, Scopus, CINAHL, LILACS, ScieELO, Google Scholar and Cochrane databases for studies reporting evidence, experience or evaluation of capacity-building of policy-makers, service planners or managers in mental health system strengthening in LMICs. Reports in English, Spanish, Portuguese, French or German were included. Additional papers were identified by hand-searching references and contacting experts and key informants. Database searches yielded 2922 abstracts and 28 additional papers were identified. Following screening, 409 full papers were reviewed, of which 14 fulfilled inclusion criteria for the review. Data were extracted from all included papers and synthesized into a narrative review. Only a small number of mental health system-related capacity-building interventions for policy-makers and planners in LMICs were described. Most models of capacity-building combined brief training with longer term mentorship, dialogue and/or the establishment of networks of support. However, rigorous research and evaluation methods were largely absent, with studies being of low quality, limiting the potential to separate mental health system strengthening outcomes from the effects of associated contextual factors. This review demonstrates the need for partnership approaches to building the capacity of mental health policy-makers and planners in LMICs, assessed rigorously against pre-specified conceptual frameworks and hypotheses, utilising longitudinal evaluation and mixed quantitative and qualitative approaches.

Design and development of a web-based application for diabetes patient data management.

PubMed

Deo, S S; Deobagkar, D N; Deobagkar, Deepti D

2005-01-01

A web-based database management system developed for collecting, managing and analysing information of diabetes patients is described here. It is a searchable, client-server, relational database application, developed on the Windows platform using Oracle, Active Server Pages (ASP), Visual Basic Script (VB Script) and Java Script. The software is menu-driven and allows authorized healthcare providers to access, enter, update and analyse patient information. Graphical representation of data can be generated by the system using bar charts and pie charts. An interactive web interface allows users to query the database and generate reports. Alpha- and beta-testing of the system was carried out and the system at present holds records of 500 diabetes patients and is found useful in diagnosis and treatment. In addition to providing patient data on a continuous basis in a simple format, the system is used in population and comparative analysis. It has proved to be of significant advantage to the healthcare provider as compared to the paper-based system.

Creative Engineering Based Education with Autonomous Robots Considering Job Search Support

NASA Astrophysics Data System (ADS)

Takezawa, Satoshi; Nagamatsu, Masao; Takashima, Akihiko; Nakamura, Kaeko; Ohtake, Hideo; Yoshida, Kanou

The Robotics Course in our Mechanical Systems Engineering Department offers “Robotics Exercise Lessons” as one of its Problem-Solution Based Specialized Subjects. This is intended to motivate students learning and to help them acquire fundamental items and skills on mechanical engineering and improve understanding of Robotics Basic Theory. Our current curriculum was established to accomplish this objective based on two pieces of research in 2005: an evaluation questionnaire on the education of our Mechanical Systems Engineering Department for graduates and a survey on the kind of human resources which companies are seeking and their expectations for our department. This paper reports the academic results and reflections of job search support in recent years as inherited and developed from the previous curriculum.

Specification-based software sizing: An empirical investigation of function metrics

NASA Technical Reports Server (NTRS)

Jeffery, Ross; Stathis, John

1993-01-01

For some time the software industry has espoused the need for improved specification-based software size metrics. This paper reports on a study of nineteen recently developed systems in a variety of application domains. The systems were developed by a single software services corporation using a variety of languages. The study investigated several metric characteristics. It shows that: earlier research into inter-item correlation within the overall function count is partially supported; a priori function counts, in themself, do not explain the majority of the effort variation in software development in the organization studied; documentation quality is critical to accurate function identification; and rater error is substantial in manual function counting. The implication of these findings for organizations using function based metrics are explored.

A P&T Committee's Transition to a Complete Electronic Meeting System-A Multisite Institution Experience.

PubMed

Al-Jedai, Ahmed H; Algain, Roaa A; Alghamidi, Said A; Al-Jazairi, Abdulrazaq S; Amin, Rashid; Bin Hussain, Ibrahim Z

2017-10-01

In the last few decades, changes to formulary management processes have taken place in institutions with closed formulary systems. However, many P&T committees continued to operate using traditional paper-based systems. Paper-based systems have many limitations, including confidentiality, efficiency, open voting, and paper wastage. This becomes more challenging when dealing with a multisite P&T committee that handles formulary matters across the whole health care system. In this paper, we discuss the implementation of the first paperless, completely electronic, Web-based formulary management system across a large health care system in the Middle East. We describe the transitioning of a multisite P&T committee in a large tertiary care institution from a paper-based to an all-electronic system. The challenges and limitations of running a multisite P&T committee utilizing a paper system are discussed. The design and development of a Web-based committee floor management application that can be used from notebooks, tablets, and hand-held devices is described. Implementation of a flexible, interactive, easy-to-use, and efficient electronic formulary management system is explained in detail. The development of an electronic P&T committee meeting system that encompasses electronic document sharing, voting, and communication could help multisite health care systems unify their formularies across multiple sites. Our experience might not be generalizable to all institutions because this depends heavily on system features, existing processes and workflow, and implementation across different sites.

Laser based bi-directional Gbit ground links with the Tesat transportable adaptive optical ground station

NASA Astrophysics Data System (ADS)

Heine, Frank; Saucke, Karen; Troendle, Daniel; Motzigemba, Matthias; Bischl, Hermann; Elser, Dominique; Marquardt, Christoph; Henninger, Hennes; Meyer, Rolf; Richter, Ines; Sodnik, Zoran

2017-02-01

Optical ground stations can be an alternative to radio frequency based transmit (forward) and receive (return) systems for data relay services and other applications including direct to earth optical communications from low earth orbit spacecrafts, deep space receivers, space based quantum key distribution systems and Tbps capacity feeder links to geostationary spacecrafts. The Tesat Transportable Adaptive Optical Ground Station is operational since September 2015 at the European Space Agency site in Tenerife, Spain.. This paper reports about the results of the 2016 experimental campaigns including the characterization of the optical channel from Tenerife for an optimized coding scheme, the performance of the T-AOGS under different atmospheric conditions and the first successful measurements of the suitability of the Alphasat LCT optical downlink performance for future continuous variable quantum key distribution systems.

Detection of tunnel excavation using fiber optic reflectometry: experimental validation

NASA Astrophysics Data System (ADS)

Linker, Raphael; Klar, Assaf

2013-06-01

Cross-border smuggling tunnels enable unmonitored movement of people and goods, and pose a severe threat to homeland security. In recent years, we have been working on the development of a system based on fiber- optic Brillouin time domain reflectometry (BOTDR) for detecting tunnel excavation. In two previous SPIE publications we have reported the initial development of the system as well as its validation using small-scale experiments. This paper reports, for the first time, results of full-scale experiments and discusses the system performance. The results confirm that distributed measurement of strain profiles in fiber cables buried at shallow depth enable detection of tunnel excavation, and by proper data processing, these measurements enable precise localization of the tunnel, as well as reasonable estimation of its depth.

A procedure for linking psychosocial job characteristics data to health surveys.

PubMed Central

Schwartz, J E; Pieper, C F; Karasek, R A

1988-01-01

A system is presented for linking information about psychosocial characteristics of job situations to national health surveys. Job information can be imputed to individuals on surveys that contain three-digit US Census occupation codes. Occupational mean scores on psychosocial job characteristics-control over task situation (decision latitude), psychological work load, physical exertion, and other measures-for the linkage system are derived from US national surveys of working conditions (Quality of Employment Surveys 1969, 1972, and 1977). This paper discusses a new method for reducing the biases in multivariate analyses that are likely to arise when utilizing linkage systems based on mean scores. Such biases are reduced by modifying the linkage system to adjust imputed individual scores for demographic factors such as age, education, race, marital status and, implicitly, sex (since men and women have separate linkage data bases). Statistics on the linkage system's efficiency and reliability are reported. All dimensions have high inter-survey reproducibility. Despite their psychosocial nature, decision latitude and physical exertion can be more efficiently imputed with the linkage system than earnings (a non-psychosocial job characteristic). The linkage system presented here is a useful tool for initial epidemiological studies of the consequences of psychosocial job characteristics and constitutes the methodological basis for the subsequent paper. PMID:3389426

Novel concept of washing for microfluidic paper-based analytical devices based on capillary force of paper substrates.

PubMed

Mohammadi, Saeed; Busa, Lori Shayne Alamo; Maeki, Masatoshi; Mohamadi, Reza M; Ishida, Akihiko; Tani, Hirofumi; Tokeshi, Manabu

2016-11-01

A novel washing technique for microfluidic paper-based analytical devices (μPADs) that is based on the spontaneous capillary action of paper and eliminates unbound antigen and antibody in a sandwich immunoassay is reported. Liquids can flow through a porous medium (such as paper) in the absence of external pressure as a result of capillary action. Uniform results were achieved when washing a paper substrate in a PDMS holder which was integrated with a cartridge absorber acting as a porous medium. Our study demonstrated that applying this washing technique would allow μPADs to become the least expensive microfluidic device platform with high reproducibility and sensitivity. In a model μPAD assay that utilized this novel washing technique, C-reactive protein (CRP) was detected with a limit of detection (LOD) of 5 μg mL -1 . Graphical Abstract A novel washing technique for microfluidic paper-based analytical devices (μPADs) that is based on the spontaneous capillary action of paper and eliminates unbound antigen and antibody in a sandwich immunoassay is reported.

A Satellite-Based Infrastructure Providing Broadband IP Services on Board High Speed Trains

NASA Astrophysics Data System (ADS)

Feltrin, Eros; Weller, Elisabeth

After the earlier technologies that offered satellite mobile services for civil and military applications, today’s specific antenna design, modulation techniques and most powerful new generation satellites also allow a good level of performance to be achieved on-board high speed modes of transport such as aircraft and trains. This paper reports the Eutelsat’s experience in the developing and deploying architecture based on a spread spectrum system in order to provide broadband connectivity on board of high speed trains. After introducing the adopted technologies, the architecture and the constraints, some results obtained from analysis, testing and measuring of the availability of the service are reported and commented upon.

Fiscal year 1981 scientific and technical reports, articles, papers, and presentations

NASA Technical Reports Server (NTRS)

Thacker, S. S. (Compiler)

1981-01-01

This bibliography lists approximately 503 formal NASA technical reports, papers published in technical journals, and presentations by MSFC personnel in FY-1981. It also includes papers of MSFC contractors. Citations announced in the NASA scientific and technical information system are noted.

The effects of global health initiatives on country health systems: a review of the evidence from HIV/AIDS control.

PubMed

Biesma, Regien G; Brugha, Ruairí; Harmer, Andrew; Walsh, Aisling; Spicer, Neil; Walt, Gill

2009-07-01

This paper reviews country-level evidence about the impact of global health initiatives (GHIs), which have had profound effects on recipient country health systems in middle and low income countries. We have selected three initiatives that account for an estimated two-thirds of external funding earmarked for HIV/AIDS control in resource-poor countries: the Global Fund to Fight AIDS, TB and Malaria, the World Bank Multi-country AIDS Program (MAP) and the US President's Emergency Plan for AIDS Relief (PEPFAR). This paper draws on 31 original country-specific and cross-country articles and reports, based on country-level fieldwork conducted between 2002 and 2007. Positive effects have included a rapid scale-up in HIV/AIDS service delivery, greater stakeholder participation, and channelling of funds to non-governmental stakeholders, mainly NGOs and faith-based bodies. Negative effects include distortion of recipient countries' national policies, notably through distracting governments from coordinated efforts to strengthen health systems and re-verticalization of planning, management and monitoring and evaluation systems. Sub-national and district studies are needed to assess the degree to which GHIs are learning to align with and build the capacities of countries to respond to HIV/AIDS; whether marginalized populations access and benefit from GHI-funded programmes; and about the cost-effectiveness and long-term sustainability of the HIV and AIDS programmes funded by the GHIs. Three multi-country sets of evaluations, which will be reporting in 2009, will answer some of these questions.

Effectiveness of capacity building interventions relevant to public health practice: a systematic review.

PubMed

DeCorby-Watson, Kara; Mensah, Gloria; Bergeron, Kim; Abdi, Samiya; Rempel, Benjamin; Manson, Heather

2018-06-01

This systematic review assessed the effectiveness of capacity building interventions relevant to public health practice. The aim is to inform and improve capacity building interventions. Four strategies were used: 1) electronic database searching; 2) reference lists of included papers; 3) key informant consultation; and 4) grey literature searching. Inclusion (e.g., published in English) and exclusion criteria (e.g., non-English language papers published earlier than 2005) are outlined with included papers focusing on capacity building, learning plans, or professional development plans within public health and related settings, such as non-governmental organizations, government, or community-based organizations relating to public health or healthcare. Outcomes of interest included changes in knowledge, skill or confidence (self-efficacy), changes in practice (application or intent), and perceived support or supportive environments, with outcomes reported at the individual, organizational or systems level(s). Quality assessment of all included papers was completed. Fourteen papers were included in this review. These papers reported on six intervention types: 1) internet-based instruction, 2) training and workshops, 3) technical assistance, 4) education using self-directed learning, 5) communities of practice, and 6) multi-strategy interventions. The available literature showed improvements in one or more capacity-building outcomes of interest, mainly in terms of individual-level outcomes. The available literature was moderate in quality and showed a range of methodological issues. There is evidence to inform capacity building programming and how interventions can be selected to optimize impact. Organizations should carefully consider methods for analysis of capacity building interventions offered; specifically, through which mechanisms, to whom, and for which purpose. Capacity-building interventions can enhance knowledge, skill, self-efficacy (including confidence), changes in practice or policies, behaviour change, application, and system-level capacity. However in applying available evidence, organizations should consider the outcomes of highest priority, selecting intervention(s) effective for the outcome(s) of interest. Examples are given for selecting intervention(s) to match priorities and context, knowing effectiveness evidence is only one consideration in decision making. Future evaluations should: extend beyond the individual level, assess outcomes at organizational and systems levels, include objective measures of effect, assess baseline conditions, and evaluate features most critical to the success of interventions.

A P&T Committee’s Transition to a Complete Electronic Meeting System—A Multisite Institution Experience

PubMed Central

Al-Jedai, Ahmed H.; Algain, Roaa A.; Alghamidi, Said A.; Al-Jazairi, Abdulrazaq S.; Amin, Rashid; Bin Hussain, Ibrahim Z.

2017-01-01

Purpose In the last few decades, changes to formulary management processes have taken place in institutions with closed formulary systems. However, many P&T committees continued to operate using traditional paper-based systems. Paper-based systems have many limitations, including confidentiality, efficiency, open voting, and paper wastage. This becomes more challenging when dealing with a multisite P&T committee that handles formulary matters across the whole health care system. In this paper, we discuss the implementation of the first paperless, completely electronic, Web-based formulary management system across a large health care system in the Middle East. Summary We describe the transitioning of a multisite P&T committee in a large tertiary care institution from a paper-based to an all-electronic system. The challenges and limitations of running a multisite P&T committee utilizing a paper system are discussed. The design and development of a Web-based committee floor management application that can be used from notebooks, tablets, and hand-held devices is described. Implementation of a flexible, interactive, easy-to-use, and efficient electronic formulary management system is explained in detail. Conclusion The development of an electronic P&T committee meeting system that encompasses electronic document sharing, voting, and communication could help multisite health care systems unify their formularies across multiple sites. Our experience might not be generalizable to all institutions because this depends heavily on system features, existing processes and workflow, and implementation across different sites. PMID:29018301

Online Error Reporting for Managing Quality Control Within Radiology.

PubMed

Golnari, Pedram; Forsberg, Daniel; Rosipko, Beverly; Sunshine, Jeffrey L

2016-06-01

Information technology systems within health care, such as picture archiving and communication system (PACS) in radiology, can have a positive impact on production but can also risk compromising quality. The widespread use of PACS has removed the previous feedback loop between radiologists and technologists. Instead of direct communication of quality discrepancies found for an examination, the radiologist submitted a paper-based quality-control report. A web-based issue-reporting tool can help restore some of the feedback loop and also provide possibilities for more detailed analysis of submitted errors. The purpose of this study was to evaluate the hypothesis that data from use of an online error reporting software for quality control can focus our efforts within our department. For the 372,258 radiologic examinations conducted during the 6-month period study, 930 errors (390 exam protocol, 390 exam validation, and 150 exam technique) were submitted, corresponding to an error rate of 0.25 %. Within the category exam protocol, technologist documentation had the highest number of submitted errors in ultrasonography (77 errors [44 %]), while imaging protocol errors were the highest subtype error for computed tomography modality (35 errors [18 %]). Positioning and incorrect accession had the highest errors in the exam technique and exam validation error category, respectively, for nearly all of the modalities. An error rate less than 1 % could signify a system with a very high quality; however, a more likely explanation is that not all errors were detected or reported. Furthermore, staff reception of the error reporting system could also affect the reporting rate.

Usability Methods for Ensuring Health Information Technology Safety: Evidence-Based Approaches. Contribution of the IMIA Working Group Health Informatics for Patient Safety.

PubMed

Borycki, E; Kushniruk, A; Nohr, C; Takeda, H; Kuwata, S; Carvalho, C; Bainbridge, M; Kannry, J

2013-01-01

Issues related to lack of system usability and potential safety hazards continue to be reported in the health information technology (HIT) literature. Usability engineering methods are increasingly used to ensure improved system usability and they are also beginning to be applied more widely for ensuring the safety of HIT applications. These methods are being used in the design and implementation of many HIT systems. In this paper we describe evidence-based approaches to applying usability engineering methods. A multi-phased approach to ensuring system usability and safety in healthcare is described. Usability inspection methods are first described including the development of evidence-based safety heuristics for HIT. Laboratory-based usability testing is then conducted under artificial conditions to test if a system has any base level usability problems that need to be corrected. Usability problems that are detected are corrected and then a new phase is initiated where the system is tested under more realistic conditions using clinical simulations. This phase may involve testing the system with simulated patients. Finally, an additional phase may be conducted, involving a naturalistic study of system use under real-world clinical conditions. The methods described have been employed in the analysis of the usability and safety of a wide range of HIT applications, including electronic health record systems, decision support systems and consumer health applications. It has been found that at least usability inspection and usability testing should be applied prior to the widespread release of HIT. However, wherever possible, additional layers of testing involving clinical simulations and a naturalistic evaluation will likely detect usability and safety issues that may not otherwise be detected prior to widespread system release. The framework presented in the paper can be applied in order to develop more usable and safer HIT, based on multiple layers of evidence.

Implementation and evaluation of a hypercube-based method for spatiotemporal exploration and analysis

NASA Astrophysics Data System (ADS)

Marchand, Pierre; Brisebois, Alexandre; Bédard, Yvan; Edwards, Geoffrey

This paper presents the results obtained with a new type of spatiotemporal topological dimension implemented within a hypercube, i.e., within a multidimensional database (MDDB) structure formed by the conjunction of several thematic, spatial and temporal dimensions. Our goal is to support efficient SpatioTemporal Exploration and Analysis (STEA) in the context of Automatic Position Reporting System (APRS), the worldwide amateur radio system for position report transmission. Mobile APRS stations are equipped with GPS navigation systems to provide real-time positioning reports. Previous research about the multidimensional approach has proved good potential for spatiotemporal exploration and analysis despite a lack of explicit topological operators (spatial, temporal and spatiotemporal). Our project implemented such operators through a hierarchy of operators that are applied to pairs of instances of objects. At the top of the hierarchy, users can use simple operators such as "same place", "same time" or "same time, same place". As they drill down into the hierarchy, more detailed topological operators are made available such as "adjacent immediately after", "touch during" or more detailed operators. This hierarchy is structured according to four levels of granularity based on cognitive models, generalized relationships and formal models of topological relationships. In this paper, we also describe the generic approach which allows efficient STEA within the multidimensional approach. Finally, we demonstrate that such an implementation offers query run times which permit to maintain a "train-of-thought" during exploration and analysis operations as they are compatible with Newell's cognitive band (query runtime<10 s) (Newell, A., 1990. Unified theories of cognition. Harvard University Press, Cambridge MA, 549 p.).

High-performance green flexible electronics based on biodegradable cellulose nanofibril paper

PubMed Central

Jung, Yei Hwan; Chang, Tzu-Hsuan; Zhang, Huilong; Yao, Chunhua; Zheng, Qifeng; Yang, Vina W.; Mi, Hongyi; Kim, Munho; Cho, Sang June; Park, Dong-Wook; Jiang, Hao; Lee, Juhwan; Qiu, Yijie; Zhou, Weidong; Cai, Zhiyong; Gong, Shaoqin; Ma, Zhenqiang

2015-01-01

Today's consumer electronics, such as cell phones, tablets and other portable electronic devices, are typically made of non-renewable, non-biodegradable, and sometimes potentially toxic (for example, gallium arsenide) materials. These consumer electronics are frequently upgraded or discarded, leading to serious environmental contamination. Thus, electronic systems consisting of renewable and biodegradable materials and minimal amount of potentially toxic materials are desirable. Here we report high-performance flexible microwave and digital electronics that consume the smallest amount of potentially toxic materials on biobased, biodegradable and flexible cellulose nanofibril papers. Furthermore, we demonstrate gallium arsenide microwave devices, the consumer wireless workhorse, in a transferrable thin-film form. Successful fabrication of key electrical components on the flexible cellulose nanofibril paper with comparable performance to their rigid counterparts and clear demonstration of fungal biodegradation of the cellulose-nanofibril-based electronics suggest that it is feasible to fabricate high-performance flexible electronics using ecofriendly materials. PMID:26006731

High-performance green flexible electronics based on biodegradable cellulose nanofibril paper.

PubMed

Jung, Yei Hwan; Chang, Tzu-Hsuan; Zhang, Huilong; Yao, Chunhua; Zheng, Qifeng; Yang, Vina W; Mi, Hongyi; Kim, Munho; Cho, Sang June; Park, Dong-Wook; Jiang, Hao; Lee, Juhwan; Qiu, Yijie; Zhou, Weidong; Cai, Zhiyong; Gong, Shaoqin; Ma, Zhenqiang

2015-05-26

Today's consumer electronics, such as cell phones, tablets and other portable electronic devices, are typically made of non-renewable, non-biodegradable, and sometimes potentially toxic (for example, gallium arsenide) materials. These consumer electronics are frequently upgraded or discarded, leading to serious environmental contamination. Thus, electronic systems consisting of renewable and biodegradable materials and minimal amount of potentially toxic materials are desirable. Here we report high-performance flexible microwave and digital electronics that consume the smallest amount of potentially toxic materials on biobased, biodegradable and flexible cellulose nanofibril papers. Furthermore, we demonstrate gallium arsenide microwave devices, the consumer wireless workhorse, in a transferrable thin-film form. Successful fabrication of key electrical components on the flexible cellulose nanofibril paper with comparable performance to their rigid counterparts and clear demonstration of fungal biodegradation of the cellulose-nanofibril-based electronics suggest that it is feasible to fabricate high-performance flexible electronics using ecofriendly materials.

High-performance green flexible electronics based on biodegradable cellulose nanofibril paper

NASA Astrophysics Data System (ADS)

Jung, Yei Hwan; Chang, Tzu-Hsuan; Zhang, Huilong; Yao, Chunhua; Zheng, Qifeng; Yang, Vina W.; Mi, Hongyi; Kim, Munho; Cho, Sang June; Park, Dong-Wook; Jiang, Hao; Lee, Juhwan; Qiu, Yijie; Zhou, Weidong; Cai, Zhiyong; Gong, Shaoqin; Ma, Zhenqiang

2015-05-01

Today's consumer electronics, such as cell phones, tablets and other portable electronic devices, are typically made of non-renewable, non-biodegradable, and sometimes potentially toxic (for example, gallium arsenide) materials. These consumer electronics are frequently upgraded or discarded, leading to serious environmental contamination. Thus, electronic systems consisting of renewable and biodegradable materials and minimal amount of potentially toxic materials are desirable. Here we report high-performance flexible microwave and digital electronics that consume the smallest amount of potentially toxic materials on biobased, biodegradable and flexible cellulose nanofibril papers. Furthermore, we demonstrate gallium arsenide microwave devices, the consumer wireless workhorse, in a transferrable thin-film form. Successful fabrication of key electrical components on the flexible cellulose nanofibril paper with comparable performance to their rigid counterparts and clear demonstration of fungal biodegradation of the cellulose-nanofibril-based electronics suggest that it is feasible to fabricate high-performance flexible electronics using ecofriendly materials.

Governance Structures for Open Innovation: A Preliminary Framework

NASA Astrophysics Data System (ADS)

Feller, Joseph; Finnegan, Patrick; Hayes, Jeremy; O'Reilly, Philip

This research-in-progress paper presents a preliminary framework of four open innovation governance structures. The study seeks to describe four distinct ways in which firms utilize hierarchical relationships, organizational intermediaries, and the market system to supply and acquire intellectual property and/or innovation capabilities from sources external to the firm. This paper reports on phase one of the study, which involved an analysis of six open innovation exemplars based on public data. This phase of the study reveals that governance structures for open innovation can be categorized based on whether they (1) are mediated or direct or (2) seek to acquire intellectual property or innovation capability. We analyze the differences in four governance structures along seven dimensions, and reveal the importance of knowledge dispersion and uncertainty to the use of open innovation hierarchies, brokerages, and markets. The paper concludes by examining the implications of the findings and outlining the next phase of the study.

Identifying Stages in a Learning Hierarchy for Use in Formative Assessment--The Example of Line Graphs

ERIC Educational Resources Information Center

Stacey, Kaye; Price, Beth; Steinle, Vicki

2012-01-01

This paper discusses issues arising in the design of questions to use in an on-line computer-based formative assessment system, focussing on how best to identify the stages of a learning hierarchy for reporting to teachers. Data from several hundred students is used to illustrate how design decisions have been made for a test on interpreting line…

Information system to manage anatomical knowledge and image data about brain

NASA Astrophysics Data System (ADS)

Barillot, Christian; Gibaud, Bernard; Montabord, E.; Garlatti, S.; Gauthier, N.; Kanellos, I.

1994-09-01

This paper reports about first results obtained in a project aiming at developing a computerized system to manage knowledge about brain anatomy. The emphasis is put on the design of a knowledge base which includes a symbolic model of cerebral anatomical structures (grey nuclei, cortical structures such as gyri and sulci, verntricles, vessels, etc.) and of hypermedia facilities allowing to retrieve and display information associated with the objects (texts, drawings, images). Atlas plates digitized from a stereotactic atlas are also used to provide natural and effective communication means between the user and the system.

Research on IPv6 intrusion detection system Snort-based

NASA Astrophysics Data System (ADS)

Shen, Zihao; Wang, Hui

2010-07-01

This paper introduces the common intrusion detection technologies, discusses the work flow of Snort intrusion detection system, and analyzes IPv6 data packet encapsulation and protocol decoding technology. We propose the expanding Snort architecture to support IPv6 intrusion detection in accordance with CIDF standard combined with protocol analysis technology and pattern matching technology, and present its composition. The research indicates that the expanding Snort system can effectively detect various intrusion attacks; it is high in detection efficiency and detection accuracy and reduces false alarm and omission report, which effectively solves the problem of IPv6 intrusion detection.

Scaling-up health information systems to improve HIV treatment: An assessment of initial patient monitoring systems in Mozambique.

PubMed

Hochgesang, Mindy; Zamudio-Haas, Sophia; Moran, Lissa; Nhampossa, Leopoldo; Packel, Laura; Leslie, Hannah; Richards, Janise; Shade, Starley B

2017-01-01

The rapid scale-up of HIV care and treatment in resource-limited countries requires concurrent, rapid development of health information systems to support quality service delivery. Mozambique, a country with an 11.5% prevalence of HIV, has developed nation-wide patient monitoring systems (PMS) with standardized reporting tools, utilized by all HIV treatment providers in paper or electronic form. Evaluation of the initial implementation of PMS can inform and strengthen future development as the country moves towards a harmonized, sustainable health information system. This assessment was conducted in order to 1) characterize data collection and reporting processes and PMS resources available and 2) provide evidence-based recommendations for harmonization and sustainability of PMS. This baseline assessment of PMS was conducted with eight non-governmental organizations that supported the Ministry of Health to provide 90% of HIV care and treatment in Mozambique. The study team conducted structured and semi-structured surveys at 18 health facilities located in all 11 provinces. Seventy-nine staff were interviewed. Deductive a priori analytic categories guided analysis. Health facilities have implemented paper and electronic monitoring systems with varying success. Where in use, robust electronic PMS facilitate facility-level reporting of required indicators; improve ability to identify patients lost to follow-up; and support facility and patient management. Challenges to implementation of monitoring systems include a lack of national guidelines and norms for patient level HIS, variable system implementation and functionality, and limited human and infrastructure resources to maximize system functionality and information use. This initial assessment supports the need for national guidelines to harmonize, expand, and strengthen HIV-related health information systems. Recommendations may benefit other countries with similar epidemiologic and resource-constrained environments seeking to improve PMS implementation. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Towards collaborative filtering recommender systems for tailored health communications.

PubMed

Marlin, Benjamin M; Adams, Roy J; Sadasivam, Rajani; Houston, Thomas K

2013-01-01

The goal of computer tailored health communications (CTHC) is to promote healthy behaviors by sending messages tailored to individual patients. Current CTHC systems collect baseline patient "profiles" and then use expert-written, rule-based systems to target messages to subsets of patients. Our main interest in this work is the study of collaborative filtering-based CTHC systems that can learn to tailor future message selections to individual patients based explicit feedback about past message selections. This paper reports the results of a study designed to collect explicit feedback (ratings) regarding four aspects of messages from 100 subjects in the smoking cessation support domain. Our results show that most users have positive opinions of most messages and that the ratings for all four aspects of the messages are highly correlated with each other. Finally, we conduct a range of rating prediction experiments comparing several different model variations. Our results show that predicting future ratings based on each user's past ratings contributes the most to predictive accuracy.

Towards Collaborative Filtering Recommender Systems for Tailored Health Communications

PubMed Central

Marlin, Benjamin M.; Adams, Roy J.; Sadasivam, Rajani; Houston, Thomas K.

2013-01-01

The goal of computer tailored health communications (CTHC) is to promote healthy behaviors by sending messages tailored to individual patients. Current CTHC systems collect baseline patient “profiles” and then use expert-written, rule-based systems to target messages to subsets of patients. Our main interest in this work is the study of collaborative filtering-based CTHC systems that can learn to tailor future message selections to individual patients based explicit feedback about past message selections. This paper reports the results of a study designed to collect explicit feedback (ratings) regarding four aspects of messages from 100 subjects in the smoking cessation support domain. Our results show that most users have positive opinions of most messages and that the ratings for all four aspects of the messages are highly correlated with each other. Finally, we conduct a range of rating prediction experiments comparing several different model variations. Our results show that predicting future ratings based on each user’s past ratings contributes the most to predictive accuracy. PMID:24551430

Sustainable mobile information infrastructures in low resource settings.

PubMed

Braa, Kristin; Purkayastha, Saptarshi

2010-01-01

Developing countries represent the fastest growing mobile markets in the world. For people with no computing access, a mobile will be their first computing device. Mobile technologies offer a significant potential to strengthen health systems in developing countries with respect to community based monitoring, reporting, feedback to service providers, and strengthening communication and coordination between different health functionaries, medical officers and the community. However, there are various challenges in realizing this potential including technological such as lack of power, social, institutional and use issues. In this paper a case study from India on mobile health implementation and use will be reported. An underlying principle guiding this paper is to see mobile technology not as a "stand alone device" but potentially an integral component of an integrated mobile supported health information infrastructure.

Results for the Brine Evaporation Bag (BEB) Brine Processing Test

NASA Technical Reports Server (NTRS)

Delzeit, Lance; Flynn, Michael; Fisher, John; Shaw, Hali; Kawashima, Brian; Beeler, David; Howard, Kevin

2015-01-01

The recent Brine Processing Test compared the NASA Forward Osmosis Brine Dewatering (FOBD), Paragon Ionomer Water Processor (IWP), UMPQUA Ultrasonic Brine Dewatering System (UBDS), and the NASA Brine Evaporation Bag (BEB). This paper reports the results of the BEB. The BEB was operated at 70 deg C and a base pressure of 12 torr. The BEB was operated in a batch mode, and processed 0.4L of brine per batch. Two different brine feeds were tested, a chromic acid-urine brine and a chromic acid-urine-hygiene mix brine. The chromic acid-urine brine, known as the ISS Alternate Pretreatment Brine, had an average processing rate of 95 mL/hr with a specific power of 5kWhr/L. The complete results of these tests will be reported within this paper.

Learning to leverage existing information systems: Part 1. Principles.

PubMed

Neil, Nancy; Nerenz, David

2003-10-01

The success of performance improvement efforts depends on effective measurement and feedback regarding clinical processes and outcomes. Yet most health care organizations have fragmented rather than integrated data systems. Methods and practical guidance are provided for leveraging available information sources to obtain and create valid performance improvement-related information for use by clinicians and administrators. At Virginia Mason Health System (VMHS; Seattle), a vertically integrated hospital and multispecialty group practice, patient records are paper based and are supplemented with electronic reporting for laboratory and radiology services. Despite growth in the resources and interest devoted to organization-wide performance measurement, quality improvement, and evidence-based tools, VMHS's information systems consist of largely stand-alone, legacy systems organized around the ability to retrieve information on patients, one at a time. By 2002, without any investment in technology, VMHS had developed standardized, clinic-wide key indicators of performance updated and reported regularly at the patient, provider, site, and organizational levels. On the basis of VHMS's experience, principles can be suggested to guide other organizations to explore solutions using their own information systems: for example, start simply, but start; identify information needs; tap multiple data streams; and improve incrementally.

Multifunctional Surface-Enhanced Raman Spectroscopy-Detectable Silver Nanoparticles Combined Photodynamic Therapy and pH-Triggered Chemotherapy.

PubMed

Srinivasan, Supriya; Bhardwaj, Vinay; Nagasetti, Abhignyan; Fernandez-Fernandez, Alicia; McGoron, Anthony J

2016-12-01

This research paper reports the development of a multifunctional anti-cancer prodrug system based on silver nanoparticles. This prodrug system is composed of 70-nm sized nanoparticles and features photodynamic therapeutic properties and active, pH-triggered drug release. The silver nanoparticles are decorated with a folic acid (FA) targeting ligand via an amide bond, and also conjugated to the chemotherapeutic drug doxorubicin (DOX) via an acid-cleavable hydrazone bond. Both FA and DOX are attached to the silver nanoparticles through a polyethylene glycol (PEG) spacer. This prodrug system can preferentially enter cells that over-express folic acid receptors, with subsequent intracellular drug release triggered by reduced intracellular pH. Moreover, the silver nanoparticle carrier system exhibits photodynamic therapeutic (PDT) activity, so that the cell viability of cancer cells that overexpress folate receptors can be further reduced upon light irradiation. The dual effects of pH-triggered drug release and PDT increase the therapeutic efficacy of this system. The multifunctional nanoparticles can be probed intracellularly through Surface-Enhanced Raman Spectroscopy (SERS) and fluorescence spectroscopy. The current report explores the applicability of this multifunctional silver nanoparticle-based system for cancer theranostics.

Network Penetration Testing and Research

NASA Technical Reports Server (NTRS)

Murphy, Brandon F.

2013-01-01

This paper will focus the on research and testing done on penetrating a network for security purposes. This research will provide the IT security office new methods of attacks across and against a company's network as well as introduce them to new platforms and software that can be used to better assist with protecting against such attacks. Throughout this paper testing and research has been done on two different Linux based operating systems, for attacking and compromising a Windows based host computer. Backtrack 5 and BlackBuntu (Linux based penetration testing operating systems) are two different "attacker'' computers that will attempt to plant viruses and or NASA USRP - Internship Final Report exploits on a host Windows 7 operating system, as well as try to retrieve information from the host. On each Linux OS (Backtrack 5 and BlackBuntu) there is penetration testing software which provides the necessary tools to create exploits that can compromise a windows system as well as other operating systems. This paper will focus on two main methods of deploying exploits 1 onto a host computer in order to retrieve information from a compromised system. One method of deployment for an exploit that was tested is known as a "social engineering" exploit. This type of method requires interaction from unsuspecting user. With this user interaction, a deployed exploit may allow a malicious user to gain access to the unsuspecting user's computer as well as the network that such computer is connected to. Due to more advance security setting and antivirus protection and detection, this method is easily identified and defended against. The second method of exploit deployment is the method mainly focused upon within this paper. This method required extensive research on the best way to compromise a security enabled protected network. Once a network has been compromised, then any and all devices connected to such network has the potential to be compromised as well. With a compromised network, computers and devices can be penetrated through deployed exploits. This paper will illustrate the research done to test ability to penetrate a network without user interaction, in order to retrieve personal information from a targeted host.

Multi-parameter monitoring of electrical machines using integrated fibre Bragg gratings

NASA Astrophysics Data System (ADS)

Fabian, Matthias; Hind, David; Gerada, Chris; Sun, Tong; Grattan, Kenneth T. V.

2017-04-01

In this paper a sensor system for multi-parameter electrical machine condition monitoring is reported. The proposed FBG-based system allows for the simultaneous monitoring of machine vibration, rotor speed and position, torque, spinning direction, temperature distribution along the stator windings and on the rotor surface as well as the stator wave frequency. This all-optical sensing solution reduces the component count of conventional sensor systems, i.e., all 48 sensing elements are contained within the machine operated by a single sensing interrogation unit. In this work, the sensing system has been successfully integrated into and tested on a permanent magnet motor prototype.

Design and Operation of an Electrochemical Methanol Concentration Sensor for Direct Methanol Fuel Cell Systems

NASA Technical Reports Server (NTRS)

Narayanan, S. R.; Valdez, T. I.; Chun, W.

2000-01-01

The development of a 150-Watt packaged power source based on liquid feed direct methanol fuel cells is being pursued currently at the Jet propulsion Laboratory for defense applications. In our studies we find that the concentration of methanol in the fuel circulation loop affects the electrical performance and efficiency the direct methanol fuel cell systems significantly. The practical operation of direct methanol fuel cell systems, therefore, requires accurate monitoring and control of methanol concentration. The present paper reports on the principle and demonstration of an in-house developed electrochemical sensor suitable for direct methanol fuel cell systems.

Rescheduling with iterative repair

NASA Technical Reports Server (NTRS)

Zweben, Monte; Davis, Eugene; Daun, Brian; Deale, Michael

1992-01-01

This paper presents a new approach to rescheduling called constraint-based iterative repair. This approach gives our system the ability to satisfy domain constraints, address optimization concerns, minimize perturbation to the original schedule, produce modified schedules, quickly, and exhibits 'anytime' behavior. The system begins with an initial, flawed schedule and then iteratively repairs constraint violations until a conflict-free schedule is produced. In an empirical demonstration, we vary the importance of minimizing perturbation and report how fast the system is able to resolve conflicts in a given time bound. We also show the anytime characteristics of the system. These experiments were performed within the domain of Space Shuttle ground processing.

An analytical fuzzy-based approach to ?-gain optimal control of input-affine nonlinear systems using Newton-type algorithm

NASA Astrophysics Data System (ADS)

Milic, Vladimir; Kasac, Josip; Novakovic, Branko

2015-10-01

This paper is concerned with ?-gain optimisation of input-affine nonlinear systems controlled by analytic fuzzy logic system. Unlike the conventional fuzzy-based strategies, the non-conventional analytic fuzzy control method does not require an explicit fuzzy rule base. As the first contribution of this paper, we prove, by using the Stone-Weierstrass theorem, that the proposed fuzzy system without rule base is universal approximator. The second contribution of this paper is an algorithm for solving a finite-horizon minimax problem for ?-gain optimisation. The proposed algorithm consists of recursive chain rule for first- and second-order derivatives, Newton's method, multi-step Adams method and automatic differentiation. Finally, the results of this paper are evaluated on a second-order nonlinear system.

Attitudes and Perceptions of Students in a Systems Engineering E-Learnig Course

ERIC Educational Resources Information Center

de Vega, Carolina Armijo; McAnally-Salas, Lewis; Lavigne, Gilles

2009-01-01

In this paper is reported the attitudes and perception of students in a systems Engineering e-learning course and a teacher with more than six years of experience teaching online courses. The paper reports the teacher and students' perceptions about the e-learning courses experience. Personalized interviews with some of the students were carried…

A web-based incident reporting system: a two years' experience in an Italian research and teaching hospital.

PubMed

Bodina, A; Demarchi, A; Castaldi, S

2014-01-01

A web-based incident reporting system (IRS) is a tool allowing healthcare workers to voluntary and anonymously report adverse events/near misses. In 2010, this system was introduced in a research and teaching hospital in metropolitan area in the North part of Italy, in order to detect errors and to learn from failures in care delivery. The aim of this paper is to assess whether and how IRS has proved to be a valuable tool to manage clinical risk and improve healthcare quality. Adverse events are reported anonymously by staff members with the use of an online template form available in the hospital intranet. We retrospectively reviewed the recorded data for each incident/near miss reported between January 2011 and December 2012. The number of reported incidents/near misses was 521 in 2011 and 442 in 2012. In the two years the admissions were 36.974 and 36.107 respectively. We noticed that nursing staff made more use of IRS and that reported errors were basically related to prescription and administration of medications. Much international literature reports that adverse events and near misses are 10% of admissions. Our data are far from that number, thus meaning that a failure in reporting adverse events exists. This consideration, together with the high number of near misses in comparison with occurred errors, leads us to speculate that adverse events with serious consequences for patients are marginally reported. Probably the lack of a strong leadership considering IRS as an instrument for improving quality and operators' reluctance to overcome the culture of blame may negatively affect IRS.

The Prevalence of Phenylketonuria in Arab Countries, Turkey, and Iran: A Systematic Review.

PubMed

El-Metwally, Ashraf; Yousef Al-Ahaidib, Lujane; Ayman Sunqurah, Alaa; Al-Surimi, Khaled; Househ, Mowafa; Alshehri, Ali; Da'ar, Omar B; Abdul Razzak, Hira; AlOdaib, Ali Nasser

2018-01-01

This paper seeks to identify the prevalence of Phenylketonuria (PKU) in Arab countries, Turkey, and Iran. The study reviewed the existence of comprehensive national newborn screening programs and reported consanguinity rates. A computer based literature search was conducted using relevant keywords to retrieve studies conducted on PKU. A total of 34 articles were included. Prevalence was categorized based on the type of screening method used for PKU diagnoses. The prevalence of classical PKU diagnosed through a comprehensive national newborn screening program ranged from 0.005% to 0.0167%. The highest prevalence was reported in Turkey at 0.0167%, whereas the lowest prevalence was reported in the UAE, 0.005%. The findings of this review emphasize the need for the establishment of more efficient reporting systems in these countries that would help measure Disability-Adjusted Life Year (DALY) in order to estimate the overall societal burden of PKU.

Evaluation of natural language processing systems: Issues and approaches

DOE Office of Scientific and Technical Information (OSTI.GOV)

Guida, G.; Mauri, G.

This paper encompasses two main topics: a broad and general analysis of the issue of performance evaluation of NLP systems and a report on a specific approach developed by the authors and experimented on a sample test case. More precisely, it first presents a brief survey of the major works in the area of NLP systems evaluation. Then, after introducing the notion of the life cycle of an NLP system, it focuses on the concept of performance evaluation and analyzes the scope and the major problems of the investigation. The tools generally used within computer science to assess the qualitymore » of a software system are briefly reviewed, and their applicability to the task of evaluation of NLP systems is discussed. Particular attention is devoted to the concepts of efficiency, correctness, reliability, and adequacy, and how all of them basically fail in capturing the peculiar features of performance evaluation of an NLP system is discussed. Two main approaches to performance evaluation are later introduced; namely, black-box- and model-based, and their most important characteristics are presented. Finally, a specific model for performance evaluation proposed by the authors is illustrated, and the results of an experiment with a sample application are reported. The paper concludes with a discussion on research perspective, open problems, and importance of performance evaluation to industrial applications.« less

Medical Device Integration Model Based on the Internet of Things

PubMed Central

Hao, Aiyu; Wang, Ling

2015-01-01

At present, hospitals in our country have basically established the HIS system, which manages registration, treatment, and charge, among many others, of patients. During treatment, patients need to use medical devices repeatedly to acquire all sorts of inspection data. Currently, the output data of the medical devices are often manually input into information system, which is easy to get wrong or easy to cause mismatches between inspection reports and patients. For some small hospitals of which information construction is still relatively weak, the information generated by the devices is still presented in the form of paper reports. When doctors or patients want to have access to the data at a given time again, they can only look at the paper files. Data integration between medical devices has long been a difficult problem for the medical information system, because the data from medical devices are lack of mandatory unified global standards and have outstanding heterogeneity of devices. In order to protect their own interests, manufacturers use special protocols, etc., thus causing medical decices to still be the "lonely island" of hospital information system. Besides, unfocused application of the data will lead to failure to achieve a reasonable distribution of medical resources. With the deepening of IT construction in hospitals, medical information systems will be bound to develop towards mobile applications, intelligent analysis, and interconnection and interworking, on the premise that there is an effective medical device integration (MDI) technology. To this end, this paper presents a MDI model based on the Internet of Things (IoT). Through abstract classification, this model is able to extract the common characteristics of the devices, resolve the heterogeneous differences between them, and employ a unified protocol to integrate data between devices. And by the IoT technology, it realizes interconnection network of devices and conducts associate matching between the data and the inspected at the device terminal in a timely manner. PMID:26628938

Medical Device Integration Model Based on the Internet of Things.

PubMed

Hao, Aiyu; Wang, Ling

2015-01-01

At present, hospitals in our country have basically established the HIS system, which manages registration, treatment, and charge, among many others, of patients. During treatment, patients need to use medical devices repeatedly to acquire all sorts of inspection data. Currently, the output data of the medical devices are often manually input into information system, which is easy to get wrong or easy to cause mismatches between inspection reports and patients. For some small hospitals of which information construction is still relatively weak, the information generated by the devices is still presented in the form of paper reports. When doctors or patients want to have access to the data at a given time again, they can only look at the paper files. Data integration between medical devices has long been a difficult problem for the medical information system, because the data from medical devices are lack of mandatory unified global standards and have outstanding heterogeneity of devices. In order to protect their own interests, manufacturers use special protocols, etc., thus causing medical decices to still be the "lonely island" of hospital information system. Besides, unfocused application of the data will lead to failure to achieve a reasonable distribution of medical resources. With the deepening of IT construction in hospitals, medical information systems will be bound to develop towards mobile applications, intelligent analysis, and interconnection and interworking, on the premise that there is an effective medical device integration (MDI) technology. To this end, this paper presents a MDI model based on the Internet of Things (IoT). Through abstract classification, this model is able to extract the common characteristics of the devices, resolve the heterogeneous differences between them, and employ a unified protocol to integrate data between devices. And by the IoT technology, it realizes interconnection network of devices and conducts associate matching between the data and the inspected at the device terminal in a timely manner.

Sustainability in Health care by allocating resources effectively (SHARE) 1: introducing a series of papers reporting an investigation of disinvestment in a local healthcare setting.

PubMed

Harris, Claire; Green, Sally; Ramsey, Wayne; Allen, Kelly; King, Richard

2017-05-04

This is the first in a series of papers reporting Sustainability in Health care by Allocating Resources Effectively (SHARE). The SHARE Program is an investigation of concepts, opportunities, methods and implications for evidence-based investment and disinvestment in health technologies and clinical practices in a local healthcare setting. The papers in this series are targeted at clinicians, managers, policy makers, health service researchers and implementation scientists working in this context. This paper presents an overview of the organisation-wide, systematic, integrated, evidence-based approach taken by one Australian healthcare network and provides an introduction and guide to the suite of papers reporting the experiences and outcomes.

Delay-based signal shapers and acfa 2020 blended wing body flight control system

NASA Astrophysics Data System (ADS)

Kucera, V.; Hromčík, M.

2013-12-01

The purpose of this paper is twofold. First: results related to application of signal shapers, imposed on pilot's commands, in cooperation with feedback flight control system (FCS) are reported for the case of ACFA2020 (Active Control for Flexible 2020 Aircraft) blended-wingbody (BWB) design. The results suggest that signal shapers can cooperate nicely both with FCS focused on the rigid-body dynamics only, as well as with an implemented and properly working active damping system. In both cases, the amount of vibrations due to pilot's inputs (manoeuvres) can be substantially reduced. Second: combination of signal shapers and rate-limiters is discussed in detail. Rate-limiters, representing finite achievable rates of servos for control surfaces, deteriorate considerably performance of the delay-based shapers. Configuration proposes only open-loop response of the free aircraft (without controller) for shaped reference respect to nonlinearities at action surface. Standard versions of the shapers cannot be therefore directly applied, especially for higher control surfaces deflections. Instead, two efficient alternatives can be used, suggested in the paper, that take the rate limitations into account at the design stage already.

Paperless registration during survey enumerations and large oral cholera mass vaccination in Zanzibar, the United Republic of Tanzania

PubMed Central

Deen, Jaqueline L; Khatib, Ahmed; Enwere, Godwin; von Seidlein, Lorenz; Reyburn, Rita; Ali, Said Mohammed; Chang, Na Yoon; Perroud, Valérie; Marodon, Frédérique; Saleh, Abdul A; Hashim, R; Lopez, Anna Lena; Beard, James; Ley, Benedikt N; Thriemer, Kamala; Puri, Mahesh K; Sah, Binod; Jiddawi, Mohamed Saleh; Clemens, John D

2010-01-01

Abstract Problem Field trials require extensive data preparation and complex logistics. The use of personal digital assistants (PDAs) can bypass many of the traditional steps that are necessary in a paper-based data entry system. Approach We programmed, designed and supervised the use of PDAs for a large survey enumeration and mass vaccination campaign. Local setting The project was implemented in Zanzibar in the United Republic of Tanzania. Zanzibar is composed of two main islands, Unguja and Pemba, where outbreaks of cholera have been reported since the 1970s. Relevant changes PDAs allowed us to digitize information at the initial point of contact with the respondents. Immediate response by the system in case of error helped ensure the quality and reliability of the data. PDAs provided quick data summaries that allowed subsequent research activities to be implemented in a timely fashion. Lessons learnt Portability, immediate recording and linking of information enhanced structure data collection in our study. PDAs could be more useful than paper-based systems for data collection in the field, especially in impoverished settings in developing countries. PMID:20616976

Paperless registration during survey enumerations and large oral cholera mass vaccination in Zanzibar, the United Republic of Tanzania.

PubMed

Ali, Mohammad; Deen, Jaqueline L; Khatib, Ahmed; Enwere, Godwin; von Seidlein, Lorenz; Reyburn, Rita; Ali, Said Mohammed; Chang, Na Yoon; Perroud, Valérie; Marodon, Frédérique; Saleh, Abdul A; Hashim, R; Lopez, Anna Lena; Beard, James; Ley, Benedikt N; Thriemer, Kamala; Puri, Mahesh K; Sah, Binod; Jiddawi, Mohamed Saleh; Clemens, John D

2010-07-01

Field trials require extensive data preparation and complex logistics. The use of personal digital assistants (PDAs) can bypass many of the traditional steps that are necessary in a paper-based data entry system. We programmed, designed and supervised the use of PDAs for a large survey enumeration and mass vaccination campaign. The project was implemented in Zanzibar in the United Republic of Tanzania. Zanzibar is composed of two main islands, Unguja and Pemba, where outbreaks of cholera have been reported since the 1970s. PDAs allowed us to digitize information at the initial point of contact with the respondents. Immediate response by the system in case of error helped ensure the quality and reliability of the data. PDAs provided quick data summaries that allowed subsequent research activities to be implemented in a timely fashion. Portability, immediate recording and linking of information enhanced structure data collection in our study. PDAs could be more useful than paper-based systems for data collection in the field, especially in impoverished settings in developing countries.

Guest Editors' introduction

NASA Astrophysics Data System (ADS)

Magee, Jeff; Moffett, Jonathan

1996-06-01

Special Issue on Management This special issue contains seven papers originally presented at an International Workshop on Services for Managing Distributed Systems (SMDS'95), held in September 1995 in Karslruhe, Germany. The workshop was organized to present the results of two ESPRIT III funded projects, Sysman and IDSM, and more generally to bring together work in the area of distributed systems management. The workshop focused on the tools and techniques necessary for managing future large-scale, multi-organizational distributed systems. The open call for papers attracted a large number of submissions and the subsequent attendance at the workshop, which was larger than expected, clearly indicated that the topics addressed by the workshop were of considerable interest both to industry and academia. The papers selected for this special issue represent an excellent coverage of the issues addressed by the workshop. A particular focus of the workshop was the need to help managers deal with the size and complexity of modern distributed systems by the provision of automated support. This automation must have two prime characteristics: it must provide a flexible management system which responds rapidly to changing organizational needs, and it must provide both human managers and automated management components with the information that they need, in a form which can be used for decision-making. These two characteristics define the two main themes of this special issue. To satisfy the requirement for a flexible management system, workers in both industry and universities have turned to architectures which support policy directed management. In these architectures policy is explicitly represented and can be readily modified to meet changing requirements. The paper `Towards implementing policy-based systems management' by Meyer, Anstötz and Popien describes an approach whereby policy is enforced by event-triggered rules. Krause and Zimmermann in their paper `Implementing configuration management policies for distributed applications' present a system in which the configuration of the system in terms of its constituent components and their interconnections can be controlled by reconfiguration rules. Neumair and Wies in the paper `Case study: applying management policies to manage distributed queuing systems' examine how high-level policies can be transformed into practical and efficient implementations for the case of distributed job queuing systems. Koch and Krämer in `Rules and agents for automated management of distributed systems' describe the results of an experiment in using the software development environment Marvel to provide a rule based implementation of management policy. The paper by Jardin, `Supporting scalability and flexibility in a distributed management platform' reports on the experience of using a policy directed approach in the industrial strength TeMIP management platform. Both human managers and automated management components rely on a comprehensive monitoring system to provide accurate and timely information on which decisions are made to modify the operation of a system. The monitoring service must deal with condensing and summarizing the vast amount of data available to produce the events of interest to the controlling components of the overall management system. The paper `Distributed intelligent monitoring and reporting facilities' by Pavlou, Mykoniatis and Sanchez describes a flexible monitoring system in which the monitoring agents themselves are policy directed. Their monitoring system has been implemented in the context of the OSIMIS management platform. Debski and Janas in `The SysMan monitoring service and its management environment' describe the overall SysMan management system architecture and then concentrate on how event processing and distribution is supported in that architecture. The collection of papers gives a good overview of the current state of the art in distributed system management. It has reached a point at which a first generation of systems, based on policy representation within systems and automated monitoring systems, are coming into practical use. The papers also serve to identify many of the issues which are open research questions. In particular, as management systems increase in complexity, how far can we automate the refinement of high-level policies into implementations? How can we detect and resolve conflicts between policies? And how can monitoring services deal efficiently with ever-growing complexity and volume? We wish to acknowledge the many contributors, besides the authors, who have made this issue possible: the anonymous reviewers who have done much to assure the quality of these papers, Morris Sloman and his Programme Committee who convened the Workshop, and Thomas Usländer and his team at the Fraunhofer Institute in Karlsruhe who acted as hosts.

The role of risk-based prioritization in total quality management

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bennett, C.T.

1994-10-01

The climate in which government managers must make decisions grows more complex and uncertain. All stakeholders - the public, industry, and Congress - are demanding greater consciousness, responsibility, and accountability of programs and their budgets. Yet, managerial decisions have become multifaceted, involve greater risk, and operate over much longer time periods. Over the last four or five decades, as policy analysis and decisions became more complex, scientists from psychology, operations research, systems science, and economics have developed a more or less coherent process called decision analysis to aid program management. The process of decision analysis - a systems theoretic approachmore » - provides the backdrop for this paper. The Laboratory Integrated Prioritization System (LIPS) has been developed as a systems analytic and risk-based prioritization tool to aid the management of the Tri-Labs` (Lawrence Livermore, Los Alamos, and Sandia) operating resources. Preliminary analyses of the effects of LIPS has confirmed the practical benefits of decision and systems sciences - the systematic, quantitative reduction in uncertainty. To date, the use of LIPS - and, hence, its value - has been restricted to resource allocation within the Tri-Labs` operations budgets. This report extends the role of risk-based prioritization to the support of DOE Total Quality Management (TQM) programs. Furthermore, this paper will argue for the requirement to institutionalize an evolutionary, decision theoretic approach to the policy analysis of the Department of Energy`s Program Budget.« less

Innovation and fusion of x-ray and optical tomography for mouse studies of breast cancer

NASA Astrophysics Data System (ADS)

Wang, Ge; Cong, Wenxiang; Yang, Qingsong; Pian, Qi; Zhu, Shouping; Liang, Jimin; Barroso, Margarida; Intes, Xavier

2016-10-01

For early detection and targeted therapy, receptor expression profiling is instrumental to classifying breast cancer into sub-groups. In particular, human epidermal growth factor receptor 2 (HER2) expression has been shown to have both prognostic and predictive values. Recently, an increasingly more complex view of HER2 in breast cancer has emerged from genome sequencing that highlights the role of inter- and intra-tumor heterogeneity in therapy resistance. Studies on such heterogeneity demand high-content, high-resolution functional and molecular imaging in vivo, which cannot be achieved using any single imaging tool. Clearly, there is a critical need to develop a multimodality approach for breast cancer imaging. Since 2006, grating-based x-ray imaging has been developed for much-improved x-ray images. In 2014, the demonstration of fluorescence molecular tomography (FMT) guided by x-ray grating-based micro-CT was reported with encouraging results and major drawbacks. In this paper, we propose to integrate grating-based x-ray tomography (GXT) and high-dimensional optical tomography (HOT) into the first-of-its-kind truly-fused GXT-HOT (pronounced as "Get Hot") system for imaging of breast tumor heterogeneity, HER2 expression and dimerization, and therapeutic response. The primary innovation lies in developing a brand-new high-content, high-throughput x-ray optical imager based on several contemporary techniques to have MRI-type soft tissue contrast, PET-like sensitivity and specificity, and micro-CT-equivalent resolution. This system consists of two orthogonal x-ray Talbot-Lau interferometric imaging chains and a hyperspectral time-resolved single-pixel optical imager. Both the system design and pilot results will be reported in this paper, along with relevant issues under further investigation.

Weather Information Communications (WINCOMM) Overview and Status

NASA Technical Reports Server (NTRS)

Martzaklis, K.

2003-01-01

The second annual project review of Weather Information Communications (WINCOMM) is presented. The topics of discussion include: 1) In-Flight Weather Information; 2) System Elements; 3) Technology Investment Areas; 4) NAS Information Exchange; 5) FIS Datalink Architecture Analyses; 6) Hybrid FIS Datalink Architecture; 7) FIS Datalink Architecture Analyses; 8) Air Transport: Ground and Satellite-based Datalinks; 9) General Aviation: Ground and Satellite-based Datalinks; 10) Low Altitude AutoMET Reporting; 11) AutoMET: Airborne-based Datalinks; 12) Network Protocols Development; and 13) FAA/NASA Collaboration. A summary of WINCOMM is also included. This paper is in viewgraph form.

Managing Data in a GIS Environment

NASA Technical Reports Server (NTRS)

Beltran, Maria; Yiasemis, Haris

1997-01-01

A Geographic Information System (GIS) is a computer-based system that enables capture, modeling, manipulation, retrieval, analysis and presentation of geographically referenced data. A GIS operates in a dynamic environment of spatial and temporal information. This information is held in a database like any other information system, but performance is more of an issue for a geographic database than a traditional database due to the nature of the data. What distinguishes a GIS from other information systems is the spatial and temporal dimensions of the data and the volume of data (several gigabytes). Most traditional information systems are usually based around tables and textual reports, whereas GIS requires the use of cartographic forms and other visualization techniques. Much of the data can be represented using computer graphics, but a GIS is not a graphics database. A graphical system is concerned with the manipulation and presentation of graphical objects whereas a GIS handles geographic objects that have not only spatial dimensions but non-visual, i e., attribute and components. Furthermore, the nature of the data on which a GIS operates makes the traditional relational database approach inadequate for retrieving data and answering queries that reference spatial data. The purpose of this paper is to describe the efficiency issues behind storage and retrieval of data within a GIS database. Section 2 gives a general background on GIS, and describes the issues involved in custom vs. commercial and hybrid vs. integrated geographic information systems. Section 3 describes the efficiency issues concerning the management of data within a GIS environment. The paper ends with a summary of the main concerns of this paper.

Hydrogel-laden paper scaffold system for origami-based tissue engineering

PubMed Central

Kim, Su-Hwan; Lee, Hak Rae; Yu, Seung Jung; Han, Min-Eui; Lee, Doh Young; Kim, Soo Yeon; Ahn, Hee-Jin; Han, Mi-Jung; Lee, Tae-Ik; Kim, Taek-Soo; Kwon, Seong Keun; Im, Sung Gap; Hwang, Nathaniel S.

2015-01-01

In this study, we present a method for assembling biofunctionalized paper into a multiform structured scaffold system for reliable tissue regeneration using an origami-based approach. The surface of a paper was conformally modified with a poly(styrene-co-maleic anhydride) layer via initiated chemical vapor deposition followed by the immobilization of poly-l-lysine (PLL) and deposition of Ca2+. This procedure ensures the formation of alginate hydrogel on the paper due to Ca2+ diffusion. Furthermore, strong adhesion of the alginate hydrogel on the paper onto the paper substrate was achieved due to an electrostatic interaction between the alginate and PLL. The developed scaffold system was versatile and allowed area-selective cell seeding. Also, the hydrogel-laden paper could be folded freely into 3D tissue-like structures using a simple origami-based method. The cylindrically constructed paper scaffold system with chondrocytes was applied into a three-ring defect trachea in rabbits. The transplanted engineered tissues replaced the native trachea without stenosis after 4 wks. As for the custom-built scaffold system, the hydrogel-laden paper system will provide a robust and facile method for the formation of tissues mimicking native tissue constructs. PMID:26621717

Hydrogel-laden paper scaffold system for origami-based tissue engineering.

PubMed

Kim, Su-Hwan; Lee, Hak Rae; Yu, Seung Jung; Han, Min-Eui; Lee, Doh Young; Kim, Soo Yeon; Ahn, Hee-Jin; Han, Mi-Jung; Lee, Tae-Ik; Kim, Taek-Soo; Kwon, Seong Keun; Im, Sung Gap; Hwang, Nathaniel S

2015-12-15

In this study, we present a method for assembling biofunctionalized paper into a multiform structured scaffold system for reliable tissue regeneration using an origami-based approach. The surface of a paper was conformally modified with a poly(styrene-co-maleic anhydride) layer via initiated chemical vapor deposition followed by the immobilization of poly-l-lysine (PLL) and deposition of Ca(2+). This procedure ensures the formation of alginate hydrogel on the paper due to Ca(2+) diffusion. Furthermore, strong adhesion of the alginate hydrogel on the paper onto the paper substrate was achieved due to an electrostatic interaction between the alginate and PLL. The developed scaffold system was versatile and allowed area-selective cell seeding. Also, the hydrogel-laden paper could be folded freely into 3D tissue-like structures using a simple origami-based method. The cylindrically constructed paper scaffold system with chondrocytes was applied into a three-ring defect trachea in rabbits. The transplanted engineered tissues replaced the native trachea without stenosis after 4 wks. As for the custom-built scaffold system, the hydrogel-laden paper system will provide a robust and facile method for the formation of tissues mimicking native tissue constructs.

Parallel detection experiment of fluorescence confocal microscopy using DMD.

PubMed

Wang, Qingqing; Zheng, Jihong; Wang, Kangni; Gui, Kun; Guo, Hanming; Zhuang, Songlin

2016-05-01

Parallel detection of fluorescence confocal microscopy (PDFCM) system based on Digital Micromirror Device (DMD) is reported in this paper in order to realize simultaneous multi-channel imaging and improve detection speed. DMD is added into PDFCM system, working to take replace of the single traditional pinhole in the confocal system, which divides the laser source into multiple excitation beams. The PDFCM imaging system based on DMD is experimentally set up. The multi-channel image of fluorescence signal of potato cells sample is detected by parallel lateral scanning in order to verify the feasibility of introducing the DMD into fluorescence confocal microscope. In addition, for the purpose of characterizing the microscope, the depth response curve is also acquired. The experimental result shows that in contrast to conventional microscopy, the DMD-based PDFCM system has higher axial resolution and faster detection speed, which may bring some potential benefits in the biology and medicine analysis. SCANNING 38:234-239, 2016. © 2015 Wiley Periodicals, Inc. © Wiley Periodicals, Inc.

Flexible Wing Base Micro Aerial Vehicles: Vision-Guided Flight Stability and Autonomy for Micro Air Vehicles

NASA Technical Reports Server (NTRS)

Ettinger, Scott M.; Nechyba, Michael C.; Ifju, Peter G.; Wazak, Martin

2002-01-01

Substantial progress has been made recently towards design building and test-flying remotely piloted Micro Air Vehicle's (MAVs). We seek to complement this progress in overcoming the aerodynamic obstacles to.flight at very small scales with a vision stability and autonomy system. The developed system based on a robust horizon detection algorithm which we discuss in greater detail in a companion paper. In this paper, we first motivate the use of computer vision for MAV autonomy arguing that given current sensor technology, vision may he the only practical approach to the problem. We then briefly review our statistical vision-based horizon detection algorithm, which has been demonstrated at 30Hz with over 99.9% correct horizon identification. Next we develop robust schemes for the detection of extreme MAV attitudes, where no horizon is visible, and for the detection of horizon estimation errors, due to external factors such as video transmission noise. Finally, we discuss our feed-back controller for self-stabilized flight, and report results on vision autonomous flights of duration exceeding ten minutes.

Self-Powered Human-Interactive Transparent Nanopaper Systems.

PubMed

Zhong, Junwen; Zhu, Hongli; Zhong, Qize; Dai, Jiaqi; Li, Wenbo; Jang, Soo-Hwan; Yao, Yonggang; Henderson, Doug; Hu, Qiyi; Hu, Liangbing; Zhou, Jun

2015-07-28

Self-powered human-interactive but invisible electronics have many applications in anti-theft and anti-fake systems for human society. In this work, for the first time, we demonstrate a transparent paper-based, self-powered, and human-interactive flexible system. The system is based on an electrostatic induction mechanism with no extra power system appended. The self-powered, transparent paper device can be used for a transparent paper-based art anti-theft system in museums or for a smart mapping anti-fake system in precious packaging and documents, by virtue of the advantages of adding/removing freely, having no impairment on the appearance of the protected objects, and being easily mass manufactured. This initial study bridges the transparent nanopaper with a self-powered and human-interactive electronic system, paving the way for the development of smart transparent paper electronics.

The Use of an Audience Response System in an Elementary School–Based Health Education Program

PubMed Central

DeSorbo, Alexandra L.; Noble, James M.; Shaffer, Michele; Gerin, William; Williams, Olajide A.

2016-01-01

Background The audience response system (ARS) allows students to respond and interact anonymously with teachers via small handheld wireless keypads. Despite increasing popularity in classroom settings, the application of these devices to health education programming has not been studied. We assessed feasibility, engagement, and learning among children using an ARS compared with traditional pencil–paper formats, (ARS) for a stroke health education program. Method We compared outcome data generated via an ARS-based intervention to pencil–paper controls, including test scores and missing data rates among 265 schoolchildren 9 to 11 years old participating in stroke education. Among 119 children, we evaluated the feasibility of ARS use and explored student motivation with a 10-item questionnaire. We assessed facilitator experience with both methods. Results ARS use is feasible. Students reported having more fun (p < .001), increased attention (p < .001), participation (p < .001), and perceived learning outcomes (p < .001) compared with pencil–paper controls. Test scores showed highly positive improvement for both ARS and paper without additional benefits of ARS on learning. There was no difference in missing data rates (p < .001). Educators preferred the ARS. Conclusion The use of an ARS among children is feasible and improves student and facilitator engagement without additional benefits on stroke learning. PMID:23086554

Classification of patients with low back-related leg pain: a systematic review.

PubMed

Stynes, Siobhán; Konstantinou, Kika; Dunn, Kate M

2016-05-23

The identification of clinically relevant subgroups of low back pain (LBP) is considered the number one LBP research priority in primary care. One subgroup of LBP patients are those with back related leg pain. Leg pain frequently accompanies LBP and is associated with increased levels of disability and higher health costs than simple low back pain. Distinguishing between different types of low back-related leg pain (LBLP) is important for clinical management and research applications, but there is currently no clear agreement on how to define and identify LBLP due to nerve root involvement. The aim of this systematic review was to identify, describe and appraise papers that classify or subgroup populations with LBLP, and summarise how leg pain due to nerve root involvement is described and diagnosed in the various systems. The search strategy involved nine electronic databases including Medline and Embase, reference lists of eligible studies and relevant reviews. Selected papers were appraised independently by two reviewers using a standardised scoring tool. Of 13,358 initial potential eligible citations, 50 relevant papers were identified that reported on 22 classification systems. Papers were grouped according to purpose and criteria of the classification systems. Five themes emerged: (i) clinical features (ii) pathoanatomy (iii) treatment-based approach (iv) screening tools and prediction rules and (v) pain mechanisms. Three of the twenty two systems focused specifically on LBLP populations. Systems that scored highest following quality appraisal were ones where authors generally included statistical methods to develop their classifications, and supporting work had been published on the systems' validity, reliability and generalisability. There was lack of consistency in how LBLP due to nerve root involvement was described and diagnosed within the systems. Numerous classification systems exist that include patients with leg pain, a minority of them focus specifically on distinguishing between different presentations of leg pain. Further work is needed to identify clinically meaningful subgroups of LBLP patients, ideally based on large primary care cohort populations and using recommended methods for classification system development.

The use of information systems to transform utilities and regulatory commissions: The application of geographic information systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wirick, D.W.; Montgomery, G.E.; Wagman, D.C.

1995-09-01

One technology that can assist utilities remain financially viable in competitive markets and help utilities and regulators to better serve the public is information technology. Because geography is an important part of an electric, natural gas, telecommunications, or water utility, computer-based Geographic Information Systems (GIS) and related Automated Mapping/Facilities Management systems are emerging as core technologies for managing an ever-expanding variety of formerly manual or paper-based tasks. This report focuses on GIS as an example of the types of information systems that can be used by utilities and regulatory commissions. Chapter 2 provides general information about information systems and effectsmore » of information on organizations; Chapter 3 explores the conversion of an organization to an information-based one; Chapters 4 and 5 set out GIS as an example of the use of information technologies to transform the operations of utilities and commissions; Chapter 6 describes the use of GIS and other information systems for organizational reengineering efforts; and Chapter 7 examines the regulatory treatment of information systems.« less

Foot Plantar Pressure Measurement System: A Review

PubMed Central

Razak, Abdul Hadi Abdul; Zayegh, Aladin; Begg, Rezaul K.; Wahab, Yufridin

2012-01-01

Foot plantar pressure is the pressure field that acts between the foot and the support surface during everyday locomotor activities. Information derived from such pressure measures is important in gait and posture research for diagnosing lower limb problems, footwear design, sport biomechanics, injury prevention and other applications. This paper reviews foot plantar sensors characteristics as reported in the literature in addition to foot plantar pressure measurement systems applied to a variety of research problems. Strengths and limitations of current systems are discussed and a wireless foot plantar pressure system is proposed suitable for measuring high pressure distributions under the foot with high accuracy and reliability. The novel system is based on highly linear pressure sensors with no hysteresis. PMID:23012576

Mobile satellite business networks: A part of the European mobile system

NASA Technical Reports Server (NTRS)

deMateo, M. L.; Jongejans, A.; Loisy, C.; VanHimbeeck, C.; Marchal, J. P.; Borella, A.; Sartori, M.

1995-01-01

The European Space Agency (ESA) is presently procuring an L-band payload EMS, to be embarked on the ITALSAT-2 satellite due for launch in early 1996, in order to promote a regional European mobile system. One of the Land Mobile Communication systems supported by EMS is the MSBN (Mobile Satellite Business Network) voice and data system which will offer the services of a business network on a seamless European coverage. This paper will first recall the characteristics of the MSBN system, which is based on quasi-synchronized CDMA (Code Division Multiple Access) techniques in both directions, and then describe the CDMA receivers implementation. Main validation test results will also be reported confirming predicted performances.

Development of sustainable models for technology evaluation in hospital.

PubMed

Miniati, Roberto; Frosini, Francesco; Cecconi, Giulio; Dori, Fabrizio; Gentili, G Biffi

2014-01-01

This paper reports the development of standard techniques for technology evaluation in hospital carried out at the Florence Teaching Hospital Careggi (AOUC), where, as a complex system, the technological evaluation is a strategic and essential element for the maintenance of high-quality clinical activity and maximization of available resources. The aim of this paper has been the development of a system of economically sustainable models for the implementation of HTA and HS analyses in the hospital environment as well as presenting, in addition to a valid scientific resilience, the methodological and temporary flexibility to satisfy needs of hospital decision-makers. The evaluation models call for 3 main phases: an initial analysis of the in-hospital request, a collection of data, and finally a draft of a specific, easily usable set of reports. Three standardized and tested models of evaluation were developed, which, in relation to the objective of the request and schedule of the assignment, provide for the production of a speedy report (1-week), an intermediate report (1-month), or a extensive report typical of classical studies of hospital based HTA (1-year). It is then related to the evaluation model of the IORT (Intra-Operative Radiation Therapy) technology. The developed models have permitted the construction, using personnel and laboratories within the hospital, of an evaluation system reliable and responsive to the HOSPITAL's temporary needs based on the HS and HTA analyses in the hospital environment. Regarding the applicable case of IORT, this has shown how in-hospital requests have been satisfied in the preset time: although it establishes expected improvements on the social effect and weight of the illness and reveals a high territorial strategic relevance, the introduction of IORT in the hospital presents some criticalities on the impact on the healthcare organization and the necessity of specific training of medical technologist personnel.

An Ultralow-Power Sleep Spindle Detection System on Chip.

PubMed

Iranmanesh, Saam; Rodriguez-Villegas, Esther

2017-08-01

This paper describes a full system-on-chip to automatically detect sleep spindle events from scalp EEG signals. These events, which are known to play an important role on memory consolidation during sleep, are also characteristic of a number of neurological diseases. The operation of the system is based on a previously reported algorithm, which used the Teager energy operator, together with the Spectral Edge Frequency (SEF50) achieving more than 70% sensitivity and 98% specificity. The algorithm is now converted into a hardware analog based customized implementation in order to achieve extremely low levels of power. Experimental results prove that the system, which is fabricated in a 0.18 μm CMOS technology, is able to operate from a 1.25 V power supply consuming only 515 nW, with an accuracy that is comparable to its software counterpart.

Client Functional Assessment Data as Management Information: Woodrow Wilson Rehabilitation Center's Management Information System

PubMed Central

Steidle, Ernest F.

1983-01-01

This paper describes the design of a functional assessment system, a component of a management information system (MIS) that supports a comprehensive rehabilitation facility. Products of the subsystem document the functional status of rehabilitation clients through process evaluation reporting and outcomes reporting. The purpose of this paper is to describe the design of this MIS component. The environment supported, the integration requirements and the needed development approach is unique, requiring significant input from health care professionals, medical informatics specialists, statisticians and program evaluators. Strategies for the implementation of the functional assessment system are the major results reported in this paper. They are most useful to the systems designer or management engineer in a human service delivery setting. MIS plan development, computer file structure and access methods, and approaches to scheduling applications is described. Finally, the development of functional status measures is discussed. Application of the methodologies described will facilitate similar efforts towards systems development in other human service delivery settings.

Broad-area detection of structural irregularities in composites using fibre Bragg gratings

NASA Astrophysics Data System (ADS)

Davis, Claire E.; Norman, Patrick; Moss, Scott; Ratcliffe, Colin; Crane, Roger

2010-04-01

The Structural Irregularity and Damage Evaluation Routine (SIDER) is a broadband vibration-based technique that uses features in complex curvature operating shapes to locate damage and other areas with structural stiffness variations. It is designed for the inspection of large-scale composite structures not amenable to more conventional inspection methods. The current SIDER methodology relies on impact excitation at a series of grid points on the structure and records the response using a small number of accelerometers to determine the operational curvature shapes. This paper reports on a modification to the SIDER technique whereby the acceleration measurements are replaced with in-plane strain measurements using Fibre Bragg Gratings (FBGs). One of the major challenges associated with using Bragg gratings for this type of response measurement is that the strains induced by structural vibrations tend to be low, particularly at higher frequencies. This paper also reports on the development of an intensity-based, swept wavelength interrogation system to facilitate these measurements. The modified SIDER system was evaluated on an E-glass/vinyl ester composite test beam containing a machined notch. The measurements accurately detected the presence and location of the notch. The distributive capacity of FBGs means that these sensors have the potential to replace the excitation grid with a measurement grid, allowing for single point or environmental excitation. The spatially separated measurements of strain can be used to provide the curvature shapes directly. This change in approach could potentially transition SIDER from an interval-based, broad-area inspection tool to an in-service structural health monitoring system.

Using Knowledge Base for Event-Driven Scheduling of Web Monitoring Systems

NASA Astrophysics Data System (ADS)

Kim, Yang Sok; Kang, Sung Won; Kang, Byeong Ho; Compton, Paul

Web monitoring systems report any changes to their target web pages by revisiting them frequently. As they operate under significant resource constraints, it is essential to minimize revisits while ensuring minimal delay and maximum coverage. Various statistical scheduling methods have been proposed to resolve this problem; however, they are static and cannot easily cope with events in the real world. This paper proposes a new scheduling method that manages unpredictable events. An MCRDR (Multiple Classification Ripple-Down Rules) document classification knowledge base was reused to detect events and to initiate a prompt web monitoring process independent of a static monitoring schedule. Our experiment demonstrates that the approach improves monitoring efficiency significantly.

LabTrove: A Lightweight, Web Based, Laboratory “Blog” as a Route towards a Marked Up Record of Work in a Bioscience Research Laboratory

PubMed Central

Milsted, Andrew J.; Hale, Jennifer R.; Frey, Jeremy G.; Neylon, Cameron

2013-01-01

Background The electronic laboratory notebook (ELN) has the potential to replace the paper notebook with a marked-up digital record that can be searched and shared. However, it is a challenge to achieve these benefits without losing the usability and flexibility of traditional paper notebooks. We investigate a blog-based platform that addresses the issues associated with the development of a flexible system for recording scientific research. Methodology/Principal Findings We chose a blog-based approach with the journal characteristics of traditional notebooks in mind, recognizing the potential for linking together procedures, materials, samples, observations, data, and analysis reports. We implemented the LabTrove blog system as a server process written in PHP, using a MySQL database to persist posts and other research objects. We incorporated a metadata framework that is both extensible and flexible while promoting consistency and structure where appropriate. Our experience thus far is that LabTrove is capable of providing a successful electronic laboratory recording system. Conclusions/Significance LabTrove implements a one-item one-post system, which enables us to uniquely identify each element of the research record, such as data, samples, and protocols. This unique association between a post and a research element affords advantages for monitoring the use of materials and samples and for inspecting research processes. The combination of the one-item one-post system, consistent metadata, and full-text search provides us with a much more effective record than a paper notebook. The LabTrove approach provides a route towards reconciling the tensions and challenges that lie ahead in working towards the long-term goals for ELNs. LabTrove, an electronic laboratory notebook (ELN) system from the Smart Research Framework, based on a blog-type framework with full access control, facilitates the scientific experimental recording requirements for reproducibility, reuse, repurposing, and redeployment. PMID:23935832

LabTrove: a lightweight, web based, laboratory "blog" as a route towards a marked up record of work in a bioscience research laboratory.

PubMed

Milsted, Andrew J; Hale, Jennifer R; Frey, Jeremy G; Neylon, Cameron

2013-01-01

The electronic laboratory notebook (ELN) has the potential to replace the paper notebook with a marked-up digital record that can be searched and shared. However, it is a challenge to achieve these benefits without losing the usability and flexibility of traditional paper notebooks. We investigate a blog-based platform that addresses the issues associated with the development of a flexible system for recording scientific research. We chose a blog-based approach with the journal characteristics of traditional notebooks in mind, recognizing the potential for linking together procedures, materials, samples, observations, data, and analysis reports. We implemented the LabTrove blog system as a server process written in PHP, using a MySQL database to persist posts and other research objects. We incorporated a metadata framework that is both extensible and flexible while promoting consistency and structure where appropriate. Our experience thus far is that LabTrove is capable of providing a successful electronic laboratory recording system. LabTrove implements a one-item one-post system, which enables us to uniquely identify each element of the research record, such as data, samples, and protocols. This unique association between a post and a research element affords advantages for monitoring the use of materials and samples and for inspecting research processes. The combination of the one-item one-post system, consistent metadata, and full-text search provides us with a much more effective record than a paper notebook. The LabTrove approach provides a route towards reconciling the tensions and challenges that lie ahead in working towards the long-term goals for ELNs. LabTrove, an electronic laboratory notebook (ELN) system from the Smart Research Framework, based on a blog-type framework with full access control, facilitates the scientific experimental recording requirements for reproducibility, reuse, repurposing, and redeployment.

Online Paper Repositories and the Role of Scholarly Societies: An AERA Conference Report

ERIC Educational Resources Information Center

Educational Researcher, 2010

2010-01-01

This article examines issues faced by scholarly societies that are developing and sustaining online paper repositories. It is based on the AERA Conference on Online Paper Repositories, which focused on fundamental issues of policy and procedure important to the operations of online working paper repositories. The report and recommendations address…

The effect of organic farming systems on species diversity

NASA Astrophysics Data System (ADS)

Leksono, Amin Setyo

2017-11-01

Organic farming systems have been well known to support the diversity of a wide range of taxa, including microorganisms, arable flora, invertebrates, birds, and mammals, which benefit from organic management leading to increases in abundance and/or species richness. The objective of this paper is to review the effect of organic farming on species diversity reported in several articles and compare this with the current study in Gondanglegi, Malang. A review of several studies showed that organic farming systems have been reported to increase species diversity, including that of mammals, birds, arthropods, vascular plants and arbuscular mycorrhizal fungi. The researchers about arthropod groups consisted of carabid beetles, butterflies, wasps, predators, and bees. Agricultural landscape, habitat type, farming system, landscape composition and connectivity all contribute to explaining species biodiversity and richness. Moreover, based on current and relevant studies, the results showed that the application of refugia blocks has increased arthropod diversity and composition.

Usability of a barcode scanning system as a means of data entry on a PDA for self-report health outcome questionnaires: a pilot study in individuals over 60 years of age

PubMed Central

Boissy, Patrick; Jacobs, Karen; Roy, Serge H

2006-01-01

Background Throughout the medical and paramedical professions, self-report health status questionnaires are used to gather patient-reported outcome measures. The objective of this pilot study was to evaluate in individuals over 60 years of age the usability of a PDA-based barcode scanning system with a text-to-speech synthesizer to collect data electronically from self-report health outcome questionnaires. Methods Usability of the system was tested on a sample of 24 community-living older adults (7 men, 17 women) ranging in age from 63 to 93 years. After receiving a brief demonstration on the use of the barcode scanner, participants were randomly assigned to complete two sets of 16 questions using the bar code wand scanner for one set and a pen for the other. Usability was assessed using directed interviews with a usability questionnaire and performance-based metrics (task times, errors, sources of errors). Results Overall, participants found barcode scanning easy to learn, easy to use, and pleasant. Participants were marginally faster in completing the 16 survey questions when using pen entry (20/24 participants). The mean response time with the barcode scanner was 31 seconds longer than traditional pen entry for a subset of 16 questions (p = 0.001). The responsiveness of the scanning system, expressed as first scan success rate, was less than perfect, with approximately one-third of first scans requiring a rescan to successfully capture the data entry. The responsiveness of the system can be explained by a combination of factors such as the location of the scanning errors, the type of barcode used as an answer field in the paper version, and the optical characteristics of the barcode scanner. Conclusion The results presented in this study offer insights regarding the feasibility, usability and effectiveness of using a barcode scanner with older adults as an electronic data entry method on a PDA. While participants in this study found their experience with the barcode scanning system enjoyable and learned to become proficient in its use, the responsiveness of the system constitutes a barrier to wide-scale use of such a system. Optimizing the graphical presentation of the information on paper should significantly increase the system's responsiveness. PMID:17184533

Rapid MODIS-based detection of tree cover loss

NASA Astrophysics Data System (ADS)

Wheeler, David; Guzder-Williams, Brook; Petersen, Rachael; Thau, David

2018-07-01

This paper reports on recent improvements made to the FORMA (Hammer et al., 2014a) data product. The resulting system, FORMA250, is a 250-m alerting system updated daily. FORMA250 alerts are available through Global Forest Watch. These alerts can empower law enforcement officials, government agencies responsible for protecting forests, nongovernmental organizations, companies committed to sustainable forest management practices and supply chains, indigenous groups and forest-dependent communities. In addition, the alerts provide useful information for researchers who study temporal and spatial patterns of forest clearing.

Electronic case report forms and electronic data capture within clinical trials and pharmacoepidemiology.

PubMed

Rorie, David A; Flynn, Robert W V; Grieve, Kerr; Doney, Alexander; Mackenzie, Isla; MacDonald, Thomas M; Rogers, Amy

2017-09-01

Researchers in clinical and pharmacoepidemiology fields have adopted information technology (IT) and electronic data capture, but these remain underused despite the benefits. This review discusses electronic case report forms and electronic data capture, specifically within pharmacoepidemiology and clinical research. The review used PubMed and the Institute of Electrical and Electronic Engineers library. Search terms used were agreed by the authors and documented. PubMed is medical and health based, whereas Institute of Electrical and Electronic Engineers is technology based. The review focuses on electronic case report forms and electronic data capture, but briefly considers other relevant topics; consent, ethics and security. There were 1126 papers found using the search terms. Manual filtering and reviewing of abstracts further condensed this number to 136 relevant manuscripts. The papers were further categorized: 17 contained study data; 40 observational data; 27 anecdotal data; 47 covering methodology or design of systems; one case study; one literature review; two feasibility studies; and one cost analysis. Electronic case report forms, electronic data capture and IT in general are viewed with enthusiasm and are seen as a cost-effective means of improving research efficiency, educating participants and improving trial recruitment, provided concerns about how data will be protected from misuse can be addressed. Clear operational guidelines and best practises are key for healthcare providers, and researchers adopting IT, and further work is needed on improving integration of new technologies with current systems. A robust method of evaluation for technical innovation is required. © 2017 The Authors. British Journal of Clinical Pharmacology published by John Wiley & Sons Ltd on behalf of British Pharmacological Society.

Electronic case report forms and electronic data capture within clinical trials and pharmacoepidemiology

PubMed Central

Flynn, Robert W. V.; Grieve, Kerr; Doney, Alexander; Mackenzie, Isla; MacDonald, Thomas M.; Rogers, Amy

2017-01-01

Aims Researchers in clinical and pharmacoepidemiology fields have adopted information technology (IT) and electronic data capture, but these remain underused despite the benefits. This review discusses electronic case report forms and electronic data capture, specifically within pharmacoepidemiology and clinical research. Methods The review used PubMed and the Institute of Electrical and Electronic Engineers library. Search terms used were agreed by the authors and documented. PubMed is medical and health based, whereas Institute of Electrical and Electronic Engineers is technology based. The review focuses on electronic case report forms and electronic data capture, but briefly considers other relevant topics; consent, ethics and security. Results There were 1126 papers found using the search terms. Manual filtering and reviewing of abstracts further condensed this number to 136 relevant manuscripts. The papers were further categorized: 17 contained study data; 40 observational data; 27 anecdotal data; 47 covering methodology or design of systems; one case study; one literature review; two feasibility studies; and one cost analysis. Conclusion Electronic case report forms, electronic data capture and IT in general are viewed with enthusiasm and are seen as a cost‐effective means of improving research efficiency, educating participants and improving trial recruitment, provided concerns about how data will be protected from misuse can be addressed. Clear operational guidelines and best practises are key for healthcare providers, and researchers adopting IT, and further work is needed on improving integration of new technologies with current systems. A robust method of evaluation for technical innovation is required. PMID:28276585

Multifunctional microcontrollable interface module

NASA Astrophysics Data System (ADS)

Spitzer, Mark B.; Zavracky, Paul M.; Rensing, Noa M.; Crawford, J.; Hockman, Angela H.; Aquilino, P. D.; Girolamo, Henry J.

2001-08-01

This paper reports the development of a complete eyeglass- mounted computer interface system including display, camera and audio subsystems. The display system provides an SVGA image with a 20 degree horizontal field of view. The camera system has been optimized for face recognition and provides a 19 degree horizontal field of view. A microphone and built-in pre-amp optimized for voice recognition and a speaker on an articulated arm are included for audio. An important feature of the system is a high degree of adjustability and reconfigurability. The system has been developed for testing by the Military Police, in a complete system comprising the eyeglass-mounted interface, a wearable computer, and an RF link. Details of the design, construction, and performance of the eyeglass-based system are discussed.

A mobile field-work data collection system for the wireless era of health surveillance.

PubMed

Forsell, Marianne; Sjögren, Petteri; Renard, Matthew; Johansson, Olle

2011-03-01

In many countries or regions the capacity of health care resources is below the needs of the population and new approaches for health surveillance are needed. Innovative projects, utilizing wireless communication technology, contribute to reliable methods for field-work data collection and reporting to databases. The objective was to describe a new version of a wireless IT-support system for field-work data collection and administration. The system requirements were drawn from the design objective and translated to system functions. The system architecture was based on fieldwork experiences and administrative requirements. The Smartphone devices were HTC Touch Diamond2s, while the system was based on a platform with Microsoft .NET components, and a SQL Server 2005 with Microsoft Windows Server 2003 operating system. The user interfaces were based on .NET programming, and Microsoft Windows Mobile operating system. A synchronization module enabled download of field data to the database, via a General Packet Radio Services (GPRS) to a Local Area Network (LAN) interface. The field-workers considered the here-described applications user-friendly and almost self-instructing. The office administrators considered that the back-office interface facilitated retrieval of health reports and invoice distribution. The current IT-support system facilitates short lead times from fieldwork data registration to analysis, and is suitable for various applications. The advantages of wireless technology, and paper-free data administration need to be increasingly emphasized in development programs, in order to facilitate reliable and transparent use of limited resources.

Conversion of paper-based technical manuals to interactive electronic technical manuals

NASA Astrophysics Data System (ADS)

Kuo, Mu-Hsing

1999-12-01

An IETM is intended to be the functional equivalent of a paper-based Technical Manual (TM), and in most cases a total replacement for paper manual. In this paper, we will describe some of document image understanding technologies applied to the conversion of paper-based TMs to IETMs. Using these advanced technologies allow us to convert paper-based TMs to class 1/2 IETMs. However, these were not sufficient for an automated integrated logistics support system in the ROC Department of Defense. An advanced IETM system is therefore required. Such class 4/5 like IETM system could provide intelligent display of information and other user applications such as diagnostics, intelligent design and manufacturing, or computer-managed training. The author has developed some of the advanced functions, and examples will be shown to demonstrate the new aspect of IETMs.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pasquinelli, Ralph J.; /Fermilab; Jansson, Andreas

The LHC Schottky system consists for four independent 4.8 GHz triple down conversion receivers with associated data acquisition systems. Each system is capable of measuring tune, chromaticity, momentum spread in either horizontal or vertical planes; two systems per beam. The hardware commissioning has taken place from spring through fall of 2010. With nominal bunch beam currents of 10{sup 11} protons, the first incoherent Schottky signals were detected and analyzed. This paper will report on these initial commissioning results. A companion paper will report on the data analysis curve fitting and remote control user interface of the system. The Schottky systemmore » for the LHC was proposed in 2004 under the auspices of the LARP collaboration. Similar systems were commissioned in 2003 in the Fermilab Tevatron and Recycler accelerators as a means of measuring tunes noninvasively. The Schottky detector is based on the stochastic cooling pickups that were developed for the Fermilab Antiproton Source Debuncher cooling upgrade completed in 2002. These slotted line waveguide pickups have the advantage of large aperture coupled with high beam coupling characteristics. For stochastic cooling, wide bandwidths are integral to cooling performance. The bandwidth of slotted waveguide pickups can be tailored by choosing the length of the pickup and slot spacing. The Debuncher project covered the 4-8 GHz band with eight bands of pickups, each with approximately 500 MHz of bandwidth. For use as a Schottky detector, bandwidths of 100-200 MHz are required for gating, resulting in higher transfer impedance than those used for stochastic cooling. Details of hardware functionality are reported previously.« less

Web-services-based spatial decision support system to facilitate nuclear waste siting

NASA Astrophysics Data System (ADS)

Huang, L. Xinglai; Sheng, Grant

2006-10-01

The availability of spatial web services enables data sharing among managers, decision and policy makers and other stakeholders in much simpler ways than before and subsequently has created completely new opportunities in the process of spatial decision making. Though generally designed for a certain problem domain, web-services-based spatial decision support systems (WSDSS) can provide a flexible problem-solving environment to explore the decision problem, understand and refine problem definition, and generate and evaluate multiple alternatives for decision. This paper presents a new framework for the development of a web-services-based spatial decision support system. The WSDSS is comprised of distributed web services that either have their own functions or provide different geospatial data and may reside in different computers and locations. WSDSS includes six key components, namely: database management system, catalog, analysis functions and models, GIS viewers and editors, report generators, and graphical user interfaces. In this study, the architecture of a web-services-based spatial decision support system to facilitate nuclear waste siting is described as an example. The theoretical, conceptual and methodological challenges and issues associated with developing web services-based spatial decision support system are described.

Lab-on-a-chip with beta-poly(vinylidene fluoride) based acoustic microagitation.

PubMed

Cardoso, V F; Catarino, S O; Serrado Nunes, J; Rebouta, L; Rocha, J G; Lanceros-Méndez, S; Minas, G

2010-05-01

This paper reports a fully integrated disposable lab-on-a-chip with acoustic microagitation based on a piezoelectric ss-poly(vinylidene fluoride) (ss-PVDF) polymer. The device can be used for the measurement, by optical absorption spectroscopy, of biochemical parameters in physiological fluids. It comprises two dies: the fluidic die that contains the reaction chambers fabricated in SU-8 and the ss-PVDF polymer deposited underneath them; and the detection die that contains the photodetectors, its readout electronics, and the piezoelectric actuation electronics, all fabricated in a CMOS microelectronic process. The microagitation technique improves mixing and shortens reaction time. Further, it generates heating, which also improves the reaction time of the fluids. In this paper, the efficiency of the microagitation system is evaluated as a function of the amplitude and the frequency of the signal actuation. The relative contribution of the generated heating is also discussed. The system is tested for the measurement of the uric acid concentration in urine.

Management Information Systems for Vocational Education: A National Overview. Technical Report No. 1.

ERIC Educational Resources Information Center

Morgan, Robert L., Ed.; And Others

The document contains 12 papers. Two of the papers present opening and closing remarks to the conference. The other 10 deal with their State's management information system (MIS) in vocational education. The 10 papers are clustered according to whether they are primarily descriptive of student accounting (four papers), manpower supply and demand…

Ontology based decision system for breast cancer diagnosis

NASA Astrophysics Data System (ADS)

Trabelsi Ben Ameur, Soumaya; Cloppet, Florence; Wendling, Laurent; Sellami, Dorra

2018-04-01

In this paper, we focus on analysis and diagnosis of breast masses inspired by expert concepts and rules. Accordingly, a Bag of Words is built based on the ontology of breast cancer diagnosis, accurately described in the Breast Imaging Reporting and Data System. To fill the gap between low level knowledge and expert concepts, a semantic annotation is developed using a machine learning tool. Then, breast masses are classified into benign or malignant according to expert rules implicitly modeled with a set of classifiers (KNN, ANN, SVM and Decision Tree). This semantic context of analysis offers a frame where we can include external factors and other meta-knowledge such as patient risk factors as well as exploiting more than one modality. Based on MRI and DECEDM modalities, our developed system leads a recognition rate of 99.7% with Decision Tree where an improvement of 24.7 % is obtained owing to semantic analysis.

The ergodicity landscape of quantum theories

NASA Astrophysics Data System (ADS)

Ho, Wen Wei; Radičević, Đorđe

2018-02-01

This paper is a physicist’s review of the major conceptual issues concerning the problem of spectral universality in quantum systems. Here, we present a unified, graph-based view of all archetypical models of such universality (billiards, particles in random media, interacting spin or fermion systems). We find phenomenological relations between the onset of ergodicity (Gaussian-random delocalization of eigenstates) and the structure of the appropriate graphs, and we construct a heuristic picture of summing trajectories on graphs that describes why a generic interacting system should be ergodic. We also provide an operator-based discussion of quantum chaos and propose criteria to distinguish bases that can usefully diagnose ergodicity. The result of this analysis is a rough but systematic outline of how ergodicity changes across the space of all theories with a given Hilbert space dimension. As a particular example, we study the SYK model and report on the transition from maximal to partial ergodicity as the disorder strength is decreased.

An Overview of Recent Advances in Event-Triggered Consensus of Multiagent Systems.

PubMed

Ding, Lei; Han, Qing-Long; Ge, Xiaohua; Zhang, Xian-Ming

2018-04-01

Event-triggered consensus of multiagent systems (MASs) has attracted tremendous attention from both theoretical and practical perspectives due to the fact that it enables all agents eventually to reach an agreement upon a common quantity of interest while significantly alleviating utilization of communication and computation resources. This paper aims to provide an overview of recent advances in event-triggered consensus of MASs. First, a basic framework of multiagent event-triggered operational mechanisms is established. Second, representative results and methodologies reported in the literature are reviewed and some in-depth analysis is made on several event-triggered schemes, including event-based sampling schemes, model-based event-triggered schemes, sampled-data-based event-triggered schemes, and self-triggered sampling schemes. Third, two examples are outlined to show applicability of event-triggered consensus in power sharing of microgrids and formation control of multirobot systems, respectively. Finally, some challenging issues on event-triggered consensus are proposed for future research.

Monitoring complex detectors: the uSOP approach in the Belle II experiment

NASA Astrophysics Data System (ADS)

Di Capua, F.; Aloisio, A.; Ameli, F.; Anastasio, A.; Branchini, P.; Giordano, R.; Izzo, V.; Tortone, G.

2017-08-01

uSOP is a general purpose single board computer designed for deep embedded applications in control and monitoring of detectors, sensors and complex laboratory equipments. It is based on the AM3358 (1 GHz ARM Cortex A8 processor), equipped with USB and Ethernet interfaces. On-board RAM and solid state storage allows hosting a full LINUX distribution. In this paper we discuss the main aspects of the hardware and software design and the expandable peripheral architecture built around field busses. We report on several applications of uSOP system in the Belle II experiment, presently under construction at KEK (Tsukuba, Japan). In particular we will report the deployment of uSOP in the monitoring system framework of the endcap electromagnetic calorimeter.

Proposed Array-based Deep Space Network for NASA

NASA Technical Reports Server (NTRS)

Bagri, Durgadas S.; Statman, Joseph I.; Gatti, Mark S.

2007-01-01

The current assets of the Deep Space Network (DSN) of the National Aeronautics and Space Administration (NASA), especially the 70-m antennas, are aging and becoming less reliable. Furthermore, they are expensive to operate and difficult to upgrade for operation at Ka-band (321 GHz). Replacing them with comparable monolithic large antennas would be expensive. On the other hand, implementation of similar high-sensitivity assets can be achieved economically using an array-based architecture, where sensitivity is measured by G/T, the ratio of antenna gain to system temperature. An array-based architecture would also provide flexibility in operations and allow for easy addition of more G/T whenever required. Therefore, an array-based plan of the next-generation DSN for NASA has been proposed. The DSN array would provide more flexible downlink capability compared to the current DSN for robust telemetry, tracking and command services to the space missions of NASA and its international partners in a cost effective way. Instead of using the array as an element of the DSN and relying on the existing concept of operation, we explore a broader departure in establishing a more modern concept of operations to reduce the operations costs. This paper presents the array-based architecture for the next generation DSN. It includes system block diagram, operations philosophy, user's view of operations, operations management, and logistics like maintenance philosophy and anomaly analysis and reporting. To develop the various required technologies and understand the logistics of building the array-based lowcost system, a breadboard array of three antennas has been built. This paper briefly describes the breadboard array system and its performance.

Damage assessment in multilayered MEMS structures under thermal fatigue

NASA Astrophysics Data System (ADS)

Maligno, A. R.; Whalley, D. C.; Silberschmidt, V. V.

2011-07-01

This paper reports on the application of a Physics of Failure (PoF) methodology to assessing the reliability of a micro electro mechanical system (MEMS). Numerical simulations, based on the finite element method (FEM) using a sub-domain approach was used to examine the damage onset due to temperature variations (e.g. yielding of metals which may lead to thermal fatigue). In this work remeshing techniques were employed in order to develop a damage tolerance approach based on the assumption that initial flaws exist in the multi-layered.

A hybrid NIRS-EEG system for self-paced brain computer interface with online motor imagery.

PubMed

Koo, Bonkon; Lee, Hwan-Gon; Nam, Yunjun; Kang, Hyohyeong; Koh, Chin Su; Shin, Hyung-Cheul; Choi, Seungjin

2015-04-15

For a self-paced motor imagery based brain-computer interface (BCI), the system should be able to recognize the occurrence of a motor imagery, as well as the type of the motor imagery. However, because of the difficulty of detecting the occurrence of a motor imagery, general motor imagery based BCI studies have been focusing on the cued motor imagery paradigm. In this paper, we present a novel hybrid BCI system that uses near infrared spectroscopy (NIRS) and electroencephalography (EEG) systems together to achieve online self-paced motor imagery based BCI. We designed a unique sensor frame that records NIRS and EEG simultaneously for the realization of our system. Based on this hybrid system, we proposed a novel analysis method that detects the occurrence of a motor imagery with the NIRS system, and classifies its type with the EEG system. An online experiment demonstrated that our hybrid system had a true positive rate of about 88%, a false positive rate of 7% with an average response time of 10.36 s. As far as we know, there is no report that explored hemodynamic brain switch for self-paced motor imagery based BCI with hybrid EEG and NIRS system. From our experimental results, our hybrid system showed enough reliability for using in a practical self-paced motor imagery based BCI. Copyright © 2014 Elsevier B.V. All rights reserved.

The compact AMS facility at Guangzhou Institute of Geochemistry, Chinese Academy of Sciences

NASA Astrophysics Data System (ADS)

Zhu, Sanyuan; Ding, Ping; Wang, Ning; Shen, Chengde; Jia, Guodong; Zhang, Gan

2015-10-01

A compact 14C AMS facility manufactured by the National Electrostatics Corporation (NEC) has been installed at Guangzhou Institute of Geochemistry, Chinese Academy of Sciences (GIGCAS). The system is based on a Model 1.5SDH-1 Pelletron accelerator with a maximum terminal volt 0.6 MV. This paper reports the performance and the operation of this machine in the first several months after installation.

The El-Barta Child and Family Project--Community Based Early Child Care and Development Programme: An Integrated Approach. Working Papers in Early Childhood Development.

ERIC Educational Resources Information Center

Lanyasunya, Andrew Ropilo; Lesolayia, Moses S.

The advent of schooling, the cash economy, and new political systems have brought about many situations providing challenges to the Samburu and the Turkana nomadic pastoralists in northern Kenya. This report details the experiences of the staff of the El-barta project in working with communities within a situation of isolation, harsh climatic…

Automatic Multilevel Parallelization Using OpenMP

NASA Technical Reports Server (NTRS)

Jin, Hao-Qiang; Jost, Gabriele; Yan, Jerry; Ayguade, Eduard; Gonzalez, Marc; Martorell, Xavier; Biegel, Bryan (Technical Monitor)

2002-01-01

In this paper we describe the extension of the CAPO (CAPtools (Computer Aided Parallelization Toolkit) OpenMP) parallelization support tool to support multilevel parallelism based on OpenMP directives. CAPO generates OpenMP directives with extensions supported by the NanosCompiler to allow for directive nesting and definition of thread groups. We report some results for several benchmark codes and one full application that have been parallelized using our system.

Experiences of engineering Grid-based medical software.

PubMed

Estrella, F; Hauer, T; McClatchey, R; Odeh, M; Rogulin, D; Solomonides, T

2007-08-01

Grid-based technologies are emerging as potential solutions for managing and collaborating distributed resources in the biomedical domain. Few examples exist, however, of successful implementations of Grid-enabled medical systems and even fewer have been deployed for evaluation in practice. The objective of this paper is to evaluate the use in clinical practice of a Grid-based imaging prototype and to establish directions for engineering future medical Grid developments and their subsequent deployment. The MammoGrid project has deployed a prototype system for clinicians using the Grid as its information infrastructure. To assist in the specification of the system requirements (and for the first time in healthgrid applications), use-case modelling has been carried out in close collaboration with clinicians and radiologists who had no prior experience of this modelling technique. A critical qualitative and, where possible, quantitative analysis of the MammoGrid prototype is presented leading to a set of recommendations from the delivery of the first deployed Grid-based medical imaging application. We report critically on the application of software engineering techniques in the specification and implementation of the MammoGrid project and show that use-case modelling is a suitable vehicle for representing medical requirements and for communicating effectively with the clinical community. This paper also discusses the practical advantages and limitations of applying the Grid to real-life clinical applications and presents the consequent lessons learned. The work presented in this paper demonstrates that given suitable commitment from collaborating radiologists it is practical to deploy in practice medical imaging analysis applications using the Grid but that standardization in and stability of the Grid software is a necessary pre-requisite for successful healthgrids. The MammoGrid prototype has therefore paved the way for further advanced Grid-based deployments in the medical and biomedical domains.