Science.gov

Sample records for para sobrevivencia al

  1. "The Only Mexican in the Room": "Sobrevivencia" as a Way of Knowing for Mexican Transnational Students and Families

    ERIC Educational Resources Information Center

    Kasun, G. Sue

    2015-01-01

    Drawing upon multisited ethnographic case studies in the United States and Mexico, I demonstrate "sobrevivencia", a survivalist way of knowing of Mexican-origin families. Through an underdog mentality, family members persisted and sometimes thrived. However, the grittiness of the underdog mentality did not always work out. By…

  2. "The Only Mexican in the Room": "Sobrevivencia" as a Way of Knowing for Mexican Transnational Students and Families

    ERIC Educational Resources Information Center

    Kasun, G. Sue

    2015-01-01

    Drawing upon multisited ethnographic case studies in the United States and Mexico, I demonstrate "sobrevivencia", a survivalist way of knowing of Mexican-origin families. Through an underdog mentality, family members persisted and sometimes thrived. However, the grittiness of the underdog mentality did not always work out. By…

  3. Al-doped graphene-like BN nanosheet as a sensor for para-nitrophenol: DFT study

    NASA Astrophysics Data System (ADS)

    Peyghan, Ali Ahmadi; Noei, Maziar; Yourdkhani, Sirous

    2013-07-01

    We investigated the electronic sensitivity of pristine and Al-doped BN sheets to para-nitrophenol (p-NP) by using density functional calculations. It was found that p-NP adsorption on the pristine sheet is endothermic and unfavorable. By replacing adsorbing boron atom of the sheet surface by an Al atom, the sheet becomes more reactive to p-NP, so energy of 20.4 kcal/mol is released upon adsorption process. Upon p-NP adsorption on the Al-doped BN sheet, HOMO/LUMO energy gap of the sheet is dramatically decreased from 5.39 to 1.23 eV and it becomes a p-type semiconductor. Thus, the Al-doped BN sheet may transform the presence of p-NP molecule into an electrical signal, and it might be potentially used in p-NP sensors.

  4. [Al

    PubMed

    Purath; Köppe; Schnöckel

    1999-10-04

    A "naked" aluminum atom links two aluminum tetrahedra in the [Al(7){N(SiMe(3))(2)}(6)](-) ion (see picture), which results from the reaction of a metastable AlCl solution with LiN(SiMe(3))(2) and crystallizes with [Li(OEt(2))(3)](+) as cation. This unique structure among molecular metal atom clusters represents a small but characteristic section of cubic close-packed aluminum.

  5. "Estudio tribologico de aceros para moldes. Aplicacion al moldeo por inyeccion de polibutilentereftalato reforzado con fibra de vidrio"

    NASA Astrophysics Data System (ADS)

    Martinez Mateo, Isidoro Jose

    Mould materials for injection moulding of polymers and polymer-matrix composites represent a relevant industrial economic sector due to the large quantity of pieces and components processed. The material selection for mould manufacturing, its composition and heat treatment, the hardening procedures and machining and finishing processes determine the service performance and life of the mould. In the first part of the present study, the relationship between the hardness and microstructure and the wear resistance of mould steels from large blocks has been studied by pin-on-disc tests, studying the main wear mechanisms. In order to determine the surface damage on mould steels under real injection conditions, different commercial steels have been studied by measuring the variation of surface roughness with the number of injected pieces with different reinforcement percentages and different mould geometries, by using optical profilometry and scanning electron microscopy techniques. It was important to determine the variation of surface roughness of the moulded pieces with the number of injection operations. The materials used were polybutyleneterephthalate pure and reinforced with either 20% or 50% glass fibre. For the different mould designs, the evolution of the glass fibre orientation with injection flow has been determined by image analysis and related to roughness changes and surface damage, both of the composite parts and of the mould steel surface. Finally, the abrasion resistance of the composite parts has been studied by scratch tests as a function of the number of injected parts and of the scratch direction with respect to injection flow and glass fibre orientation. Los materiales para moldes de inyeccion de polimeros y materiales compuestos representan un sector economicamente muy relevante debido al gran aumento del numero de componentes fabricados a partir de materiales polimericos obtenidos mediante moldeo por inyeccion. La seleccion del material para la

  6. EXPERIENCIAS RELACIONADAS A UNA INTERVENCIÓN PARA REDUCIR EL ESTIGMA RELACIONADO AL VIH/SIDA ENTRE ESTUDIANTES DE MEDICINA EN PUERTO RICO

    PubMed Central

    Cintrón-Bou, Francheska; Varas-Díaz, Nelson; Marzán-Rodríguez, Melissa; Neilands, Torsten B.

    2016-01-01

    Existe estigma relacionado al VIH. A las personas con VIH/SIDA-PCVS se les viola sus derechos y obstaculiza su bienestar mental/físico. Profesionales de la salud-PS son fuente de apoyo primordial, sin embargo estos/as le estigmatizan. Es útil adiestrar a PS en relación al estigma social. Implantamos la intervención para reducir el estigma relacionado al VIH/SIDA con 507 estudiantes de medicina. Resultó ser una intervención efectiva, hubo reducción en los niveles de estigma a partir de nuestra intervención y diferencias significativas con el grupo control (p≤.05). Generar espacios de adiestramiento para atender el estigma relacionado al VIH/SIDA es pertinente para la psicología comunitaria porque colaboramos en la reducción de actitudes estigmatizantes que afectan adversamente la prevención de nuevas infecciones, la adherencia al tratamiento antirretroviral y la calidad de vida. PMID:27829690

  7. Antimycobacterial, antimicrobial, and biocompatibility properties of para-aminosalicylic acid with zinc layered hydroxide and Zn/Al layered double hydroxide nanocomposites

    PubMed Central

    Saifullah, Bullo; El Zowalaty, Mohamed E; Arulselvan, Palanisamy; Fakurazi, Sharida; Webster, Thomas J; Geilich, Benjamin M; Hussein, Mohd Zobir

    2014-01-01

    The treatment of tuberculosis by chemotherapy is complicated due to multiple drug prescriptions, long treatment duration, and adverse side effects. We report here for the first time an in vitro therapeutic effect of nanocomposites based on para-aminosalicylic acid with zinc layered hydroxide (PAS-ZLH) and zinc-aluminum layered double hydroxides (PAS-Zn/Al LDH), against mycobacteria, Gram-positive bacteria, and Gram-negative bacteria. The nanocomposites demonstrated good antimycobacterial activity and were found to be effective in killing Gram-positive and Gram-negative bacteria. A biocompatibility study revealed good biocompatibility of the PAS-ZLH nanocomposites against normal human MRC-5 lung cells. The para-aminosalicylic acid loading was quantified with high-performance liquid chromatography analysis. In summary, the present preliminary in vitro studies are highly encouraging for further in vivo studies of PAS-ZLH and PAS-Zn/Al LDH nanocomposites to treat tuberculosis. PMID:25114509

  8. Antimycobacterial, antimicrobial, and biocompatibility properties of para-aminosalicylic acid with zinc layered hydroxide and Zn/Al layered double hydroxide nanocomposites.

    PubMed

    Saifullah, Bullo; El Zowalaty, Mohamed E; Arulselvan, Palanisamy; Fakurazi, Sharida; Webster, Thomas J; Geilich, Benjamin M; Hussein, Mohd Zobir

    2014-01-01

    The treatment of tuberculosis by chemotherapy is complicated due to multiple drug prescriptions, long treatment duration, and adverse side effects. We report here for the first time an in vitro therapeutic effect of nanocomposites based on para-aminosalicylic acid with zinc layered hydroxide (PAS-ZLH) and zinc-aluminum layered double hydroxides (PAS-Zn/Al LDH), against mycobacteria, Gram-positive bacteria, and Gram-negative bacteria. The nanocomposites demonstrated good antimycobacterial activity and were found to be effective in killing Gram-positive and Gram-negative bacteria. A biocompatibility study revealed good biocompatibility of the PAS-ZLH nanocomposites against normal human MRC-5 lung cells. The para-aminosalicylic acid loading was quantified with high-performance liquid chromatography analysis. In summary, the present preliminary in vitro studies are highly encouraging for further in vivo studies of PAS-ZLH and PAS-Zn/Al LDH nanocomposites to treat tuberculosis.

  9. Agregación de para-H2 en chorros supersónicos: del dímero al sólido

    NASA Astrophysics Data System (ADS)

    María Fernández, José

    En este trabajo se mostrarán los estudios de expansiones supersónicas de para-H2 desde toberas criogénicas, realizados en el laboratorio de Fluidodinámica Molecular del IEM. Hemos registrado los espectros Raman de dichas expansiones en el intervalo de frecuencias de 4145 a 4162 cm-1, próximo a la línea Q(0) del monómero no rotante H2, a 4161.18 cm-1. En el espectro Raman, además de la línea Q(0) del monómero, se observan unos picos débiles, que, por su comportamiento con la temperatura de la tobera y la distancia a la misma, asignamos a la transición homóloga en agregados de p-H2. Dependiendo de las condiciones, se observan agregados pequeños (de 2 a 13 moléculas de p-H2), agregados medios y masivos, y se llega incluso al líquido y al sólido. Las asignaciones se apoyan en un modelo sencillo, basado en la perturbación, debida al potencial intermolecular, de los estados vibracionales v=0 y v=1 en los agregados de p-H2. Se mostrarán detalles de la instalación experimental, ejemplos de los espectros obtenidos en diversas condiciones, y detalles de la interpretación cuantitativa.

  10. Diagnosing ALS

    MedlinePlus

    ... that a person diagnosed with ALS seek a second opinion from an ALS "expert" - someone who diagnoses and treats many ALS patients and has training in this medical specialty. The ALS Association maintains a list of recognized experts in the field of ALS. See ALS Association Certified Centers of ...

  11. Tiempo para un cambio

    NASA Astrophysics Data System (ADS)

    Woltjer, L.

    1987-06-01

    En la reunion celebrada en diciembre dei ano pasado informe al Consejo de mi deseo de terminar mi contrato como Director General de la ESO una vez que fuera aprobado el proyecto dei VLT, que se espera sucedera hacia fines de este aAo. Cuando fue renovada mi designacion hace tres aAos, el Consejo conocia mi intencion de no completar los cinco aAos dei contrato debido a mi deseo de disponer de mas tiempo para otras actividades. Ahora, una vez terminada la fase preparatoria para el VLT, Y habiendose presentado el proyecto formalmente al Consejo el dia 31 de marzo, y esperando su muy probable aprobacion antes dei termino de este ano, me parece que el 10 de enero de 1988 presenta una excelente fecha para que se produzca un cambio en la administracion de la ESO.

  12. ALS Association

    MedlinePlus

    ... toward a world without ALS! Walk to Defeat ALS® Walk to Defeat ALS® draws people of all ... We need your help. I Will Advocate National ALS Registry The National ALS Registry is a congressionally ...

  13. ALS - resources

    MedlinePlus

    Resources - ALS ... The following organizations are good resources for information on amyotrophic lateral sclerosis : Muscular Dystrophy Association -- www.mda.org/disease/amyotrophic-lateral-sclerosis National Amyotrophic Lateral Sclerosis (ALS) ...

  14. Description of Citricoccus nitrophenolicus sp. nov., a para-nitrophenol degrading actinobacterium isolated from a wastewater treatment plant and emended description of the genus Citricoccus Altenburger et al. 2002.

    PubMed

    Nielsen, Marie Bank; Kjeldsen, Kasper Urup; Ingvorsen, Kjeld

    2011-03-01

    A novel actinobacterium, designated PNP1(T), was isolated from a wastewater treatment plant at a pesticide factory by selective enrichment with para-nitrophenol. The strictly aerobic strain PNP1(T) grew with para-nitrophenol as the sole carbon and energy source. Metabolism of para-nitrophenol resulted in the stoichiometric release of nitrite. When incubated with both para-nitrophenol and acetate, para-nitrophenol was degraded and utilized as growth substrate prior to acetate. When grown on acetate (in the absence of ammonium) both nitrite and nitrate served as nitrogen sources, nitrate being quantitatively reduced to nitrite which accumulated in cultures during aerobic growth. Cells were coccoid and stained Gram-positive, were non-motile and did not form endospores. Colonies of strain PNP1(T) on agar medium were bright yellow, circular and smooth. The dominant menaquinone was MK-8(H(2)) (54%) and the major cellular fatty acid was anteiso C15:0 (75%). Strain PNP1(T) grew optimally at 27°C, at pH 8-8.5, at salinities 3% (w/v) NaCl, yet exhibited a substantial halotolerance with growth occurring at salinities up to 17% (w/v) NaCl. In addition to para-nitrophenol, a range of sugars, short chain fatty acids and alcohols served as electron donors for growth. The DNA G + C mol% was 68%. The genotypic and phenotypic properties suggest that strain PNP1(T) represents a novel species of the actinobacterial genus Citricoccus for which the name Citricoccus nitrophenolicus is proposed. It is the first member of this genus that has been reported to hydrolyze and grow on para-nitrophenol. The type strain is PNP1(T) (=DSM 23311(T) = CCUG 59571(T)).

  15. Desarrollo y validación de una nueva tecnología, basada en arginina al 1.5%, un compuesto de calcio insoluble y fluoruro, para el uso diario en la prevención y tratamiento de la caries dental.

    PubMed

    Cummins, D

    2013-10-22

    este artículo discute brevemente la prevalencia de caries, la naturaleza multifactorial de su etiología, el riesgo de caries y el papel y eficacia del fluoruro. Resalta también la investigación sobre el metabolismo bacteriano, que ha aportado conocimientos sobre la defensa natural oral contra la caries y la base para el desarrollo de una nueva tecnología para la prevención diaria y el tratamiento de la caries. Por último, se resume la evidencia que respalda que la tecnología complementa y mejora la eficacia anti-caries de la crema dental con fluoruro. los datos globales muestran que a pesar de la exitosa introducción del fluoruro, la caries dental es una enfermedad prevalente. La experiencia de caries depende del balance entre el consumo de azúcares, la higiene oral y el uso del fluoruro. Hay tres conceptos científicos que son fundamentales en las nuevas mediciones para detectar, tratar y monitorear la caries: (1) la caries dental es un proceso dinámico, (2) la caries dental es un proceso continuo de etapas que van desde reversible (pre-clínica) hasta irreversible (lesiones clínicamente detectables), y (3) el proceso de la caries es un balance de factores patológicos y protectores que pueden modularse para el manejo de la caries. El fluoruro funciona como factor protector al detener y revertir el proceso de la caries, pero el fluoruro no previene los factores patológicos que inician el proceso. Se ha identificado una tecnología novedosa, basada en arginina y un compuesto insoluble de calcio, que está dirigida a la placa dental para prevenir la iniciación del proceso de caries al reducir los factores patológicos. Como los mecanismos de acción de la arginina y el fluoruro son altamente complementarios, se ha desarrollado un nuevo dentífrico que combina la arginina y el fluoruro, y se ha probado clínicamente que brinda una prevención superior contra la caries. Copyright © 2013 Elsevier Ltd. All rights reserved.

  16. AL Amyloidosis

    PubMed Central

    2012-01-01

    Definition of the disease AL amyloidosis results from extra-cellular deposition of fibril-forming monoclonal immunoglobulin (Ig) light chains (LC) (most commonly of lambda isotype) usually secreted by a small plasma cell clone. Most patients have evidence of isolated monoclonal gammopathy or smoldering myeloma, and the occurrence of AL amyloidosis in patients with symptomatic multiple myeloma or other B-cell lymphoproliferative disorders is unusual. The key event in the development of AL amyloidosis is the change in the secondary or tertiary structure of an abnormal monoclonal LC, which results in instable conformation. This conformational change is responsible for abnormal folding of the LC, rich in β leaves, which assemble into monomers that stack together to form amyloid fibrils. Epidemiology AL amyloidosis is the most common type of systemic amyloidois in developed countries with an estimated incidence of 9 cases/million inhabitant/year. The average age of diagnosed patients is 65 years and less than 10% of patients are under 50. Clinical description The clinical presentation is protean, because of the wide number of tissues or organs that may be affected. The most common presenting symptoms are asthenia and dyspnoea, which are poorly specific and may account for delayed diagnosis. Renal manifestations are the most frequent, affecting two thirds of patients at presentation. They are characterized by heavy proteinuria, with nephrotic syndrome and impaired renal function in half of the patients. Heart involvement, which is present at diagnosis in more than 50% of patients, leading to restrictive cardiopathy, is the most serious complication and engages prognosis. Diagnostic methods The diagnosis relies on pathological examination of an involved site showing Congo red-positive amyloid deposits, with typical apple-green birefringence under polarized light, that stain positive with an anti-LC antibody by immunohistochemistry and/or immunofluorescence. Due to the

  17. Abu al-Layth al-Libi

    DTIC Science & Technology

    2015-02-01

    jihadi doctrine, al-Libi enrolled himself in the recently erected and highly popular al-Faruq 2 “Al-Sahab Releases ‘Winds of Paradise , Part III...February 2008, http://news.bbc.co.uk/2/hi/south_asia/7220823.stm. 3 “Al-Sahab Releases ‘Winds of Paradise , Part III,’” Global Terrorism Research Project...5 “Al-Sahab Releases ‘Winds of Paradise , Part III,’” Global Terrorism Research Project. 6 Ibid. The date provided in the video is 1410

  18. ParaDIS_lib

    SciTech Connect

    Cook, Richard D.

    2016-05-25

    The ParaDIS_lib software is a project that is funded by the DOE ASC Program. Its purpose is to provide visualization and analysis capabilities for the existing ParaDIS parallel dislocation dynamics simulation code.

  19. What Is ALS?

    MedlinePlus

    ... Javits, actor David Niven, “Sesame Street” creator Jon Stone, boxing champion Ezzard Charles, NBA Hall of Fame ... Help for People with ALS and Caregivers Read stories from families living with ALS Forms of ALS ...

  20. /Cu-Al System

    NASA Astrophysics Data System (ADS)

    Kish, Orel; Froumin, Natalya; Aizenshtein, Michael; Frage, Nachum

    2014-05-01

    Wettability and interfacial interaction of the Ta2O5/Cu-Al system were studied. Pure Cu does not wet the Ta2O5 substrate, and improved spreading is achieved when relatively a high fraction of the active element (~40 at.% Al) was added. The Al2O3 and AlTaO4 phases were observed at the Ta2O5/Cu-Al interface. A thermodynamic evaluation allowed us to suggest that the lack of wetting bellow 40 at.% Al is due to the presence of a native oxide, which covers the drop. The conditions of the native oxide decomposition and the formation of the volatile Al2O suboxide strongly depend on the vacuum level during sessile drop experiments and the composition of the Cu-Al alloy. In our case, Al contents greater than 40% provides thermodynamic conditions for the formation of Al2O (as a result of Al reaction with Al2O3) and the drop spreading. It was suggested that the final contact angle in the Ta2O5/Cu-Al system (50°) is determined by Ta adsorption on the newly formed alumina interlayer.

  1. ALS (Amyotrophic Lateral Sclerosis)

    MedlinePlus

    ... risk factors for veterans include exposure to lead, pesticides, and other environmental toxins. ALS is recognized as ... from scientific studies suggests that both genetics and environment play a role in the development of ALS. ...

  2. Lou Gehrig's Disease (ALS)

    MedlinePlus

    ... 1930s. People in England and Australia call ALS motor neurone disease (MND). The French refer to it ... about ALS in 1869. Lou Gehrig's disease damages motor neurons in the brain and spinal cord. Motor ...

  3. Genetic testing in ALS

    PubMed Central

    McLaughlin, Russell L.; Heverin, Mark; Thorpe, Owen; Abrahams, Sharon; Al-Chalabi, Ammar; Hardiman, Orla

    2017-01-01

    Objective: To determine the degree of consensus among clinicians on the clinical use of genetic testing in amyotrophic lateral sclerosis (ALS) and the factors that determine decision-making. Methods: ALS researchers worldwide were invited to participate in a detailed online survey to determine their attitudes and practices relating to genetic testing. Results: Responses from 167 clinicians from 21 different countries were analyzed. The majority of respondents (73.3%) do not consider that there is a consensus definition of familial ALS (FALS). Fifty-seven percent consider a family history of frontotemporal dementia and 48.5% the presence of a known ALS genetic mutation as sufficient for a diagnosis of FALS. Most respondents (90.2%) offer genetic testing to patients they define as having FALS and 49.4% to patients with sporadic ALS. Four main genes (SOD1, C9orf72, TARDBP, and FUS) are commonly tested. A total of 55.2% of respondents would seek genetic testing if they had personally received a diagnosis of ALS. Forty-two percent never offer presymptomatic testing to family members of patients with FALS. Responses varied between ALS specialists and nonspecialists and based on the number of new patients seen per year. Conclusions: There is a lack of consensus among clinicians as to the definition of FALS. Substantial variation exists in attitude and practices related to genetic testing of patients and presymptomatic testing of their relatives across geographic regions and between experienced specialists in ALS and nonspecialists. PMID:28159885

  4. Ventilatory Control in ALS

    PubMed Central

    Nichols, Nicole L.; Van Dyke, J.; Nashold, L.; Satriotomo, I.; Suzuki, M.; Mitchell, G.S.

    2015-01-01

    Amyotrophic lateral sclerosis (ALS) is a fatal, progressive neurodegenerative disease. ALS selectively causes degeneration in upper and lower (spinal) motor neurons, leading to muscle weakness, paralysis and death by ventilatory failure. Although ventilatory failure is generally the cause of death in ALS, little is known concerning the impact of this disorder on respiratory motor neurons, the consequences of respiratory motor neuron cell death, or the ability of the respiratory control system to “fight back” via mechanisms of compensatory respiratory plasticity. Here we review known effects of ALS on breathing, including possible effects on rhythm generation, respiratory motor neurons, and their target organs: the respiratory muscles. We consider evidence for spontaneous compensatory plasticity, preserving breathing well into disease progression despite dramatic loss of spinal respiratory motor neurons. Finally, we review current and potential therapeutic approaches directed toward preserving the capacity to breathe in ALS patients. PMID:23692930

  5. ALS2 mutations

    PubMed Central

    Schneider, Susanne A.; Carr, Lucinda; Deuschl, Guenther; Hopfner, Franziska; Stamelou, Maria; Wood, Nicholas W.; Bhatia, Kailash P.

    2014-01-01

    Objective: To determine the genetic etiology in 2 consanguineous families who presented a novel phenotype of autosomal recessive juvenile amyotrophic lateral sclerosis associated with generalized dystonia. Methods: A combination of homozygosity mapping and whole-exome sequencing in the first family and Sanger sequencing of candidate genes in the second family were used. Results: Both families were found to have homozygous loss-of-function mutations in the amyotrophic lateral sclerosis 2 (juvenile) (ALS2) gene. Conclusions: We report generalized dystonia and cerebellar signs in association with ALS2-related disease. We suggest that the ALS2 gene should be screened for mutations in patients who present with a similar phenotype. PMID:24562058

  6. Initial Symptoms of ALS

    MedlinePlus

    ... Combine your passion and commitment to finding a cure for ALS while achieving physical challenges through athletic events Register ... - 1275 K Street NW - Suite 250 - Washington, DC 20005 All content and works posted on this website are owned ...

  7. Genetic Testing for ALS

    MedlinePlus

    ... Some medical centers may require a neurological exam, psychological assessment and counseling before predictive testing. If a person in the family with ALS has a negative genetic test result (no identified genetic mutation), testing family members ...

  8. Lou Gehrig's Disease (ALS)

    MedlinePlus

    ... when it becomes necessary. For instance, a power wheelchair can enable a paralyzed person with ALS to ... done these things despite being confined to a wheelchair for many years, being able to move only ...

  9. Rub al Khali, Arabia

    NASA Image and Video Library

    2008-08-08

    NASA Terra spacecraft shows the Rub al Khali, one of the largest sand deserts in the world, encompassing most of the southern third of the Arabian Peninsula; it includes parts of Oman, United Arab Emirates, and Yemen.

  10. Ag-Al-Ca

    NASA Astrophysics Data System (ADS)

    Carow-Watamura, U.; Louzguine, D. V.; Takeuchi, A.

    This document is part of Part 1 http://dx.doi.org/10.1007/97.etType="URL"/> 'Systems from Ag-Al-Ca to Au-Pd-Si' of Subvolume B 'Physical Properties of Ternary Amorphous Alloys' of Volume 37 'Phase Diagrams and Physical Properties of Nonequilibrium Alloys' of Landolt-Börnstein - Group III 'Condensed Matter'. It contains the Chapter 'Ag-Al-Ca' with the content:

  11. Radial Velocities with PARAS

    NASA Astrophysics Data System (ADS)

    Roy, Arpita; Mahadevan, S.; Chakraborty, A.; Pathan, F. M.; Anandarao, B. G.

    2010-01-01

    The Physical Research Laboratory Advanced Radial-velocity All-sky Search (PARAS) is an efficient fiber-fed cross-dispersed high-resolution echelle spectrograph that will see first light in early 2010. This instrument is being built at the Physical Research laboratory (PRL) and will be attached to the 1.2m telescope at Gurushikhar Observatory at Mt. Abu, India. PARAS has a single-shot wavelength coverage of 370nm to 850nm at a spectral resolution of R 70000 and will be housed in a vacuum chamber (at 1x10-2 mbar pressure) in a highly temperature controlled environment. This renders the spectrograph extremely suitable for exoplanet searches with high velocity precision using the simultaneous Thorium-Argon wavelength calibration method. We are in the process of developing an automated data analysis pipeline for echelle data reduction and precise radial velocity extraction based on the REDUCE package of Piskunov & Valenti (2002), which is especially careful in dealing with CCD defects, extraneous noise, and cosmic ray spikes. Here we discuss the current status of the PARAS project and details and tests of the data analysis procedure, as well as results from ongoing PARAS commissioning activities.

  12. Frequently Asked Questions about ALS and the ALS Registry

    MedlinePlus

    ... long do people with familial ALS live? Do clusters of ALS possibly exist? (I have been told ... related?) What are the problems with studying possible clusters of ALS? What are motor neuron (nerve cell) ...

  13. Epidemiology of ALS.

    PubMed

    Nelson, L M

    Amyotrophic lateral sclerosis (ALS) is an adult-onset neurodegenerative disorder of unknown etiology. ALS onset is rare before age 40 and increases with age thereafter. Men are at higher risk than women (ratio 1.3:1). Other than age and gender, the only indisputable risk factor for ALS is genetic susceptibility, with familial cases occurring in about 10% of most case series. Genetic linkage studies have provided evidence that a mutant form of the gene that codes for Cu/Zn superoxide dismutase, an endogenous free radical scavenger, is important in 15-20% of familial cases. Epidemiologic studies have identified associations of sporadic ALS with work in occupations that involve toxicant exposure. Environmental toxicants may act against a background of increased genetic susceptibility; however, genetically acquired biochemical defects have not been identified in sporadic ALS patients. Other epidemiologic theories of disease etiology have emphasized the potential role of physical trauma, electrical shock, and vigorous physical exertion, but evidence regarding these factors is inconsistent.

  14. Statins: Do They Cause ALS?

    MedlinePlus

    Statins: Do they cause ALS? Do statins cause amyotrophic lateral sclerosis (ALS)? Answers from Francisco Lopez-Jimenez, M.D. ... D. References Sorensen HT, et al. Statins and amyotrophic lateral sclerosis: The level of evidence for an association. Journal ...

  15. Photoelectron spectroscopy of the aluminum hydride anions: AlH2-, AlH3-, Al2H6-, Al3H9-, and Al4H12-

    NASA Astrophysics Data System (ADS)

    Zhang, Xinxing; Wang, Haopeng; Collins, Evan; Lim, Alane; Ganteför, Gerd; Kiran, Boggavarapu; Schnöckel, Hansgeorg; Eichhorn, Bryan; Bowen, Kit

    2013-03-01

    We report measurements of the negative ion photoelectron spectra of the simple aluminum hydride anions: AlH2-, AlH3-, Al2H6-, Al3H9-, and Al4H12-. From these spectra, we measured the vertical detachment energies of the anions, and we estimated the electron affinities of their neutral counterparts. Our results for AlH2-, AlH3-, and Al2H6- were also compared with previous predictions by theory.

  16. Photoelectron spectroscopy of the aluminum hydride anions: AlH2(-), AlH3(-), Al2H6(-), Al3H9(-), and Al4H12(-).

    PubMed

    Zhang, Xinxing; Wang, Haopeng; Collins, Evan; Lim, Alane; Ganteför, Gerd; Kiran, Boggavarapu; Schnöckel, Hansgeorg; Eichhorn, Bryan; Bowen, Kit

    2013-03-28

    We report measurements of the negative ion photoelectron spectra of the simple aluminum hydride anions: AlH2(-), AlH3(-), Al2H6(-), Al3H9(-), and Al4H12(-). From these spectra, we measured the vertical detachment energies of the anions, and we estimated the electron affinities of their neutral counterparts. Our results for AlH2(-), AlH3(-), and Al2H6(-) were also compared with previous predictions by theory.

  17. ALS superbend magnet system

    SciTech Connect

    Zbasnik, J.; Wang, S.T.; Chen, J.Y.; DeVries, G.J.; DeMarco, R.; Fahmie, M.; Geyer, A.; Green, M.A.; Harkins, J.; Henderson, T.; Hinkson, J.; Hoyer, E.H.; Krupnick, J.; Marks, S.; Ottens, F.; Paterson, J.A.; Pipersky, P.; Portmann, G.; Robin, D.A.; Schlueter, R.D.; Steier, C.; Taylor, C.E.; Wahrer, R.

    2000-09-15

    The Lawrence Berkeley National Laboratory is preparing to upgrade the Advanced Light Source (ALS) with three superconducting dipoles (Superbends). In this paper we present the final magnet system design which incorporates R&D test results and addresses the ALS operational concerns of alignment, availability, and economy. The design incorporates conduction-cooled Nb-Ti windings and HTS current leads, epoxy-glass suspension straps, and a Gifford-McMahon cryocooler to supply steady state refrigeration. We also present the current status of fabrication and testing.

  18. Al Shanker Remembers.

    ERIC Educational Resources Information Center

    American Educator, 2000

    2000-01-01

    In a 1996 interview shortly before his death, Al Shanker, longtime president of the American Federation of Teachers, discussed such topics as: his own educational experiences; how he learned about political fighting in the Boy Scouts; the appeal of socialism; multinational corporations and the nation state; teaching tough students; and John Dewey…

  19. Fosetyl-al

    Integrated Risk Information System (IRIS)

    Integrated Risk Information System ( IRIS ) Chemical Assessment Summary U.S . Environmental Protection Agency National Center for Environmental Assessment This IRIS Summary has been removed from the IRIS database and is available for historical reference purposes . ( July 2016 ) Fosetyl - al ; CASRN

  20. Proton irradiation studies on Al and Al5083 alloy

    NASA Astrophysics Data System (ADS)

    Bhattacharyya, P.; Gayathri, N.; Bhattacharya, M.; Gupta, A. Dutta; Sarkar, Apu; Dhar, S.; Mitra, M. K.; Mukherjee, P.

    2017-10-01

    The change in the microstructural parameters and microhardness values in 6.5 MeV proton irradiated pure Al and Al5083 alloy samples have been evaluated using different model based techniques of X-ray diffraction Line Profile Analysis (XRD) and microindendation techniques. The detailed line profile analysis of the XRD data showed that the domain size increases and saturates with irradiation dose both in the case of Al and Al5083 alloy. The corresponding microstrain values did not show any change with irradiation dose in the case of the pure Al but showed an increase at higher irradiation doses in the case of Al5083 alloy. The microindendation results showed that unirradiated Al5083 alloy has higher hardness value compared to that of unirradiated pure Al. The hardness increased marginally with irradiation dose in the case of Al5083, whereas for pure Al, there was no significant change with dose.

  1. Al Sumelat Water Network. Village of Al Sumelat, Iraq

    DTIC Science & Technology

    2006-03-15

    OFFICE OF THE SPECIAL INSPECTOR GENERAL FOR IRAQ RECONSTRUCTION AL SUMELAT WATER NETWORK VILLAGE OF AL SUMELAT, IRAQ...Sumelat Water Network Village of Al Sumelat, Iraq 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e...Al Sumelat Water Network Village of Al Sumelat, Iraq Synopsis Introduction. This report was previously provided on a limited distribution basis

  2. ALS insertion devices

    NASA Astrophysics Data System (ADS)

    Hoyer, E.; Chin, J.; Halbach, K.; Hassenzahl, W. V.; Humphries, D.; Kincaid, B.; Lancaster, H.; Plate, D.

    1991-08-01

    The Advanced Light Source (ALS), the first US third generation synchrotron radiation source, is currently under construction at the Lawrence Berkeley Laboratory. The low-emittance, 1.5 GeV electron storage ring and the insertion devices are specifically designed to produce high brightness beams in the UV to soft X-Ray range. The planned initial complement of insertion devices includes four 4.6 m long undulators, with period lengths of 3.9 cm, 5.0 cm (2) and 8.0 cm, and a 2.9 m long wiggler of 16 cm period length. Undulator design is well advanced and fabrication has begun on the 5.0 cm and 8.0 cm period length undulators. This paper discusses ALS insertion device requirements; general design philosophy; and design of the magnetic structure, support structure/drive systems, control system and vacuum system.

  3. “Surviving is not the same as living”: Cancer and Sobrevivencia in Puerto Rico

    PubMed Central

    Dyer, Karen E.

    2015-01-01

    “Cancer survivorship” is an evolving concept that has been elaborated to a large extent in the mainland U.S. through the work of national advocacy organizations, and it has served as a source of cohesion for many people who have experienced cancer. However, anthropologists and other social scientists have argued that dominant meanings of survivorship—such as the idea of “cancer as a gift” or the role of positive thinking in influencing the disease course—reflect distinctively American cultural values, and survivorship outside the U.S. has remained largely unexplored even while the concept has gained some traction globally. This paper explores how the concepts of “survivorship” and “survivor” are engaged in the setting of Puerto Rico, an unincorporated territory of the U.S., and how well they are seen to explain the nature of post-treatment life. Ethnographic fieldwork for this study was conducted over 12 months split between two field visits (2 months and 10 months) between June 2010 and March 2012 in San Juan, the capital city, and Ponce, a smaller city on the southern coast. This paper is based on interviews with 23 participants treated for cancer as young adults. Participants drew from many of the prevailing discourses of survivorship—such as transformation and the importance of optimism—as well as from what they understood to be distinctive aspects of Puerto Rican culture and identity, in the crafting of a local understanding of post-treatment life. Support organizations played a key role in shaping roles and expectations associated with having had cancer, and in solidifying particular views of survivorship more broadly. PMID:25785670

  4. a New Equation of State for Solid para-HYDROGEN

    NASA Astrophysics Data System (ADS)

    Wang, Lecheng; Le Roy, Robert J.; Roy, Pierre-Nicholas

    2015-06-01

    Solid para-H_2 is a popular accommodating host for impurity spectroscopy due to its unique softness and the spherical symmetry of para-H_2 in its J}=0 rotational level. To simulate the properties of impurity-doped solid para-H_2, a reliable model for the `soft' pure solid para-H_2 at different pressures is highly desirable. While a couple of experimental and theoretical studies aimed at elucidating the equation of state (EOS) of solid para-H_2 have been reported, the calculated EOS was shown to be heavily dependent on the potential energy surface (PES) between two para-H_2 that was used in the simulations. The current study also demonstrates that different choices of the parameters governing the Quantum Monte Carlo simulation could produce different EOS curves. To obtain a reliable model for pure solid para-H_2, we used a new 1-D para-H_2 PES reported by Faruk et al. that was obtained by averaging over Hinde's highly accurate 6-D H_2--H_2 PES. The EOS of pure solid para-H_2 was calculated using the PIMC algorithm with periodic boundary conditions (PBC). To precisely determine the equilibrium density of solid para-H_2, both the value of the PIMC time step (τ) and the number of particles in the PBC cell were extrapolated to convergence. The resulting EOS agreed well with experimental observations, and the hcp structured solid para-H_2 was found to be more stable than the fcc one at 4.2K, in agreement with experiment. The vibrational frequency shift of para-H_2 as a function of the density of the pure solid was also calculated, and the value of the shift at the equilibrium density is found to agree well with experiment. T. Momose, H. Honshina, M. Fushitani and H. Katsuki, Vib. Spectrosc. 34, 95(2004). M. E. Fajardo, J. Phys. Chem. A 117, 13504 (2013). I. F. Silvera, Rev. Mod. Phys. 52, 393(1980). F. Operetto and F. Pederiva, Phys. Rev. B 73, 184124(2006). T. Omiyinka and M. Boninsegni, Phys. Rev. B 88, 024112(2013). N. Faruk, M. Schmidt, H. Li, R. J. Le Roy, and P

  5. Al Jazirah, Sudan

    NASA Technical Reports Server (NTRS)

    2008-01-01

    Al Jazirah (also Gezira) is one of the 26 states of Sudan. The state lies between the Blue Nile and the White Nile in the east-central region of the country. It is a well populated area suitable for agriculture. The area was at the southern end of Nubia and little is known about its ancient history and only limited archaeological work has been conducted in this area. The region has benefited from the Gezira Scheme, a program to foster cotton farming begun in 1925. At that time the Sennar Dam and numerous irrigation canals were built. Al Jazirah became the Sudan's major agricultural region with more than 2.5 million acres (10,000 km) under cultivation. The initial development project was semi-private, but the government nationalized it in 1950. Cotton production increased in the 1970s but by the 1990s increased wheat production has supplanted a third of the land formerly seeded with cotton.

    The image was acquired December 25, 2006, covers an area of 56 x 36.4 km, and is located near 14.5 degrees north latitude, 33.1 degrees east longitude.

    The U.S. science team is located at NASA's Jet Propulsion Laboratory, Pasadena, Calif. The Terra mission is part of NASA's Science Mission Directorate.

  6. Al Jazirah, Sudan

    NASA Technical Reports Server (NTRS)

    2008-01-01

    Al Jazirah (also Gezira) is one of the 26 states of Sudan. The state lies between the Blue Nile and the White Nile in the east-central region of the country. It is a well populated area suitable for agriculture. The area was at the southern end of Nubia and little is known about its ancient history and only limited archaeological work has been conducted in this area. The region has benefited from the Gezira Scheme, a program to foster cotton farming begun in 1925. At that time the Sennar Dam and numerous irrigation canals were built. Al Jazirah became the Sudan's major agricultural region with more than 2.5 million acres (10,000 km) under cultivation. The initial development project was semi-private, but the government nationalized it in 1950. Cotton production increased in the 1970s but by the 1990s increased wheat production has supplanted a third of the land formerly seeded with cotton.

    The image was acquired December 25, 2006, covers an area of 56 x 36.4 km, and is located near 14.5 degrees north latitude, 33.1 degrees east longitude.

    The U.S. science team is located at NASA's Jet Propulsion Laboratory, Pasadena, Calif. The Terra mission is part of NASA's Science Mission Directorate.

  7. AL Amyloidosis and Agent Orange

    MedlinePlus

    ... for survivors' benefits . Research on AL amyloidosis and herbicides The Health and Medicine Division (formally known as ... to the compounds of interest found in the herbicide Agent Orange and AL amyloidosis." VA made a ...

  8. Al Qaeda as a System

    DTIC Science & Technology

    2006-03-15

    either as welcome guests or parasites . As welcome guests, Al Qaeda members take sanctuary in sponsor states. Sponsor states provide Al Qaeda with...sponsorship, Al Qaeda takes sanctuary as parasites either overtly or covertly. They take overt sanctuary in countries that publicly claim a policy...39 Yehudit Barsky, “Al Qa’ida, Iran, and Hezbollah: A Continuing Symbiosis ,” The American Jewish Committee Series on Terrorism , February 2004, 2-3

  9. Al(+)-ligand binding energies

    NASA Technical Reports Server (NTRS)

    Sodupe, M.; Bauschlicher, Charles W., Jr.

    1991-01-01

    Ab initio calculations are used to optimize the structure and determine the binding energies of Al(+) to a series of ligands. For Al(+)-CN, the bonding was found to have a large covalent component. For the remaining ligands, the bonding is shown to be electrostatic in origin. The results obtained for Al(+) are compared with those previously reported for Mg(+).

  10. Planar Para Algebras, Reflection Positivity

    NASA Astrophysics Data System (ADS)

    Jaffe, Arthur; Liu, Zhengwei

    2017-05-01

    We define a planar para algebra, which arises naturally from combining planar algebras with the idea of ZN para symmetry in physics. A subfactor planar para algebra is a Hilbert space representation of planar tangles with parafermionic defects that are invariant under para isotopy. For each ZN, we construct a family of subfactor planar para algebras that play the role of Temperley-Lieb-Jones planar algebras. The first example in this family is the parafermion planar para algebra (PAPPA). Based on this example, we introduce parafermion Pauli matrices, quaternion relations, and braided relations for parafermion algebras, which one can use in the study of quantum information. An important ingredient in planar para algebra theory is the string Fourier transform (SFT), which we use on the matrix algebra generated by the Pauli matrices. Two different reflections play an important role in the theory of planar para algebras. One is the adjoint operator; the other is the modular conjugation in Tomita-Takesaki theory. We use the latter one to define the double algebra and to introduce reflection positivity. We give a new and geometric proof of reflection positivity by relating the two reflections through the string Fourier transform.

  11. Doppelthydrophile Blockcopolymere als Mineralisationstemplate

    NASA Astrophysics Data System (ADS)

    Kasparova, Pavla

    2002-07-01

    Die vorliegende Arbeit beschäftigt sich mit der Synthese und den Eigenschaften von doppelthydrophilen Blockcopolymeren und ihrer Anwendung in einem biomimetischen Mineralisationsprozeß von Calciumcarbonat und Bariumsulfat. Doppelthydrophile Blockcopolymere bestehen aus einem hydrophilen Block, der nicht mit Mineralien wechselwirkt und einem zweiten Polyelektrolyt-Block, der stark mit Mineraloberflächen wechselwirkt. Diese Blockcopolymere wurden durch ringöffnende Polymerisation von N-carboxyanhydriden (NCA's) und a-methoxy-ω-amino[poly(ethylene glycol)] PEG-NH2 als Initiator hergestellt. Die hergestellten Blockcopolymere wurden als effektive Wachstumsmodifikatoren für die Kristallisation von Calciumcarbonat und Bariumsulfat Mineralien eingesetzt. Die so erhaltenen Mineralpartikel (Kugeln, Hantel, eiförmige Partikel) wurden durch Lichtmikroskopie in Lösung, SEM und TEM charakterisiert. Röntgenweitwinkelstreuung (WAXS) wurde verwendet, um die Modifikation von Calciumcarbonat zu ermitteln und die Größe der Calciumcarbonat- und Bariumsulfat-Nanopartikel zu ermitteln. This work describes the synthesis and characterization of double hydrophilic block copolymers and their use in a biomimetic mineralization process of Calcium Carbonate and Barium Sulfate. Double hydrophilic block copolymers consist of a hydrophilic block that does not interact with minerals and another hydrophilic polyelectrolyte block that strongly interacts with mineral surfaces. These polymers were synthesised via ring opening polymerisation of N-carboxyanhydride (NCA), and the first hydrophilic block a-methoxy-ω-amino[poly(ethylene glycol)] PEG-NH2 was used as an initiator. The prepared block copolymers were used as effective crystal growth modifiers to control the crystallization of Calcium Carbonate and Barium Sulfate minerals. The resulting mineral particles (spheres, dumbbells, egg-like particles) were characterised by light microscopy in solution, by SEM, and by TEM. X-Ray scattering

  12. Submicron Nb-Al/Al oxide-Nb tunnel junctions sandwiched between Al films

    NASA Astrophysics Data System (ADS)

    Maier, D.; Rothermel, H.; Gundlach, K. H.; Zimmermann, R.

    1996-02-01

    A process has been developed to embed Nb-Al/Al oxide-Nb junctions in planar structures of Al films. The submicron junctions are defined by photoresist lines. Motivation for this effort is a possible application of Nb junctions confined between normal conducting Al films as mixers above 700 GHz where Nb films loose their superconductive properties and tuning circuits made out of Nb therefore exhibit losses. First mixer results at 816 GHz are presented.

  13. Path integral molecular dynamics simulation of solid para-hydrogen with an aluminum impurity

    NASA Astrophysics Data System (ADS)

    Mirijanian, Dina T.; Alexander, Millard H.; Voth, Gregory A.

    2002-11-01

    The equilibrium properties of an aluminum impurity trapped in solid para-hydrogen have been studied. The results were compared to those of a previous study by Krumrine et al. [J. Chem. Phys. 113 (2000) 9079] with an atomic boron. In the presence of vacancy defect, when the orientation-dependent Al- pH 2 potential is used, the Al atom is displaced to a position half way between its original substituted site and the vacancy site. Thermodynamic results also indicate that the presence of a neighboring vacancy helps to stabilize the Al impurity to a far greater extent than in the case of the B impurity.

  14. Growth and Optical Properties of Al rich AlN/AlGaN Quantum Wells

    NASA Astrophysics Data System (ADS)

    Tahtamouni, T. M. Al; Nepal, N.; Nakarmi, M. L.; Lin, J. Y.; Jiang, H. X.

    2006-03-01

    Al rich AlGaN alloys are promising materials for the applications in the optoelectronic devices such as deep ultraviolet (UV) emitters and detectors in the spectral range down to 200 nm. AlGaN based UV emitters (λ<340nm) has applications in bio-chemical agent detection and medical research/ health care. To realize deep UV emission (λ< 280 nm) Al rich AlGaN based quantum wells (QWs) are required. We report here the growth of AlN/AlxGa1-xNQWs (x>0.65) on AlN/sapphire templates by metalorganic chemical vapor deposition (MOCVD). Deep UV photoluminescence (PL) was employed to study the optical properties of the QWs. Well width (Al composition) dependence was studied by varying the QW thickness (Al composition) with fixed x ˜ 0.65 (well width at 3 nm). Optical properties of these QWs such as the effects of alloy fluctuation, temperature, strain and piezoelectric field, carrier and exciton localizations on the quantum efficiency have been studied. Carrier and exciton dynamics were probed. Implications of our findings on the applications of Al rich AlN/AlGaN QWs for UV emitters and detectors will also be discussed.

  15. Studies of 27Al NMR in SrAl4

    NASA Astrophysics Data System (ADS)

    Niki, Haruo; Higa, Nonoka; Kuroshima, Hiroko; Toji, Tatsuki; Morishima, Mach; Minei, Motofumi; Yogi, Mamoru; Nakamura, Ai; Hedo, Masato; Nakama, Takao; Ōnuki, Yoshichika; Harima, Hisatomo

    A charge density wave (CDW) transition at TCDW = 243 K and a structural phase (SP) transition at approximately 100 K occur in SrAl4 with the BaAl4-type body center tetragonal structure, which is the divalent and non-4f electron reference compound of EuAl4. To understand the behaviors of the CDW and SP transitions, the 27Al NMR measurements using a single crystal and a powder sample of SrAl4 have been carried out. The line width below TCDW is modulated by an electrical quadruple interaction between 27Al nucleus and CDW charge modulation. The incommensurate CDW state below TCDW changes into a different structure below TSP. The temperature dependences of Knight shifts of 27Al(I) and 27Al(II) show the different behaviors. The temperature variation of 27Al(I) Knight shift shows anomalies at the CDW and SP transition temperatures, revealing the shift to negative side below TCDW, which is attributable to the core polarization of the d-electrons. However, 27Al(II) Knight shift keeps almost constant except for the small shift due to the SP transition. The 1/T1T of 27Al(I) indicates the obvious changes due to the CDW and SP transitions, while that of 27Al(II) takes a constant value. The density of state at the Fermi level at Al(I) site below 60 K would be about 0.9 times less than that above TCDW.

  16. Morton et al. Reply

    NASA Technical Reports Server (NTRS)

    Morton, Douglas C.; Nagol, Jyoteshwar; Carabajal, Claudia C.; Rosette, Jacqueline; Palace, Michael; Cook, Bruce D.; Vermote, Eric F.; Harding, David J.; North, Peter R. J.

    2016-01-01

    Multiple mechanisms could lead to up-regulation of dry-season photosynthesis in Amazon forests, including canopy phenology and illumination geometry. We specifically tested two mechanisms for phenology-driven changes in Amazon forests during dry-season months, and the combined evidence from passive optical and lidar satellite data was incompatible with large net changes in canopy leaf area or leaf reflectance suggested by previous studies. We therefore hypothesized that seasonal changes in the fraction of sunlit and shaded canopies, one aspect of bidirectional reflectance effects in Moderate Resolution Imaging Spectroradiometer (MODIS) data, could alter light availability for dry-season photosynthesis and the photosynthetic capacity of Amazon forests without large net changes in canopy composition. Subsequent work supports the hypothesis that seasonal changes in illumination geometry and diffuse light regulate light saturation in Amazon forests. These studies clarify the physical mechanisms that govern light availability in Amazon forests from seasonal variability in direct and diffuse illumination. Previously, in the debate over light limitation of Amazon forest productivity, seasonal changes in the distribution of light within complex Amazon forest canopies were confounded with dry-season increases in total incoming photosynthetically active radiation. In the accompanying Comment, Saleska et al. do not fully account for this confounding effect of forest structure on photosynthetic capacity.

  17. Morton et al. Reply

    NASA Technical Reports Server (NTRS)

    Morton, Douglas C.; Nagol, Jyoteshwar; Carabajal, Claudia C.; Rosette, Jacqueline; Palace, Michael; Cook, Bruce D.; Vermote, Eric F.; Harding, David J.; North, Peter R. J.

    2016-01-01

    Multiple mechanisms could lead to up-regulation of dry-season photosynthesis in Amazon forests, including canopy phenology and illumination geometry. We specifically tested two mechanisms for phenology-driven changes in Amazon forests during dry-season months, and the combined evidence from passive optical and lidar satellite data was incompatible with large net changes in canopy leaf area or leaf reflectance suggested by previous studies. We therefore hypothesized that seasonal changes in the fraction of sunlit and shaded canopies, one aspect of bidirectional reflectance effects in Moderate Resolution Imaging Spectroradiometer (MODIS) data, could alter light availability for dry-season photosynthesis and the photosynthetic capacity of Amazon forests without large net changes in canopy composition. Subsequent work supports the hypothesis that seasonal changes in illumination geometry and diffuse light regulate light saturation in Amazon forests. These studies clarify the physical mechanisms that govern light availability in Amazon forests from seasonal variability in direct and diffuse illumination. Previously, in the debate over light limitation of Amazon forest productivity, seasonal changes in the distribution of light within complex Amazon forest canopies were confounded with dry-season increases in total incoming photosynthetically active radiation. In the accompanying Comment, Saleska et al. do not fully account for this confounding effect of forest structure on photosynthetic capacity.

  18. Rub' al Khali, Arabia

    NASA Technical Reports Server (NTRS)

    2008-01-01

    The Rub' al Khali is one of the largest sand deserts in the world, encompassing most of the southern third of the Arabian Peninsula. It includes parts of Oman, United Arab Emirates, and Yemen. The desert covers 650,000 square kilometers, more than the area of France. Largely unexplored until recently, the desert is 1000 km long and 500 km wide. The first documented journeys made by Westerners were those of Bertram Thomas in 1931 and St. John Philby in 1932. With daytime temperatures reaching 55 degrees Celsius, and dunes taller than 330 meters, the desert may be one of the most forbidding places on Earth.

    The image was acquired December 2, 2005, covers an area of 54.8 x 61.9 km, and is located near 20.7 degrees north latitude, 53.6 degrees east longitude.

    The U.S. science team is located at NASA's Jet Propulsion Laboratory, Pasadena, Calif. The Terra mission is part of NASA's Science Mission Directorate.

  19. The Evolution of Al Qaeda

    DTIC Science & Technology

    2007-06-15

    www.carleton.ca/cciss/res_docs/itac/gendron_e.pdf; Internet. 26Muhammad Abd al-salam Faraj, Al-Farīdah al-Ghā’ibah, trans. Johannes J.G. Jansen and... Theo Van Gogh.91 Hoffman also supports the idea proposed by other experts like Benjamin Orbach and Keith Blanchard of the Congressional Research...religious intolerance over cartoons in Danish newspapers, the assassination of Theo Van Goeh, and increasing discontent among disassociated Muslim

  20. Alexandria (Al Iskandariya), Egypt

    NASA Technical Reports Server (NTRS)

    2002-01-01

    This image of Alexandria was taken by astronauts on board the International Space Station in December 2000 using an Electronic Still Camera. A wider-angle view (STS088-739-90) taken from the Space Shuttle in December 1998 is available for context. Alexandria (Al Iskandariya) occupies a T-shaped peninsula and strip of land separating the Mediterranean from Lake Mariout. Originally the town was built upon a mole (stone breakwater) called Heptastadium, which joined the island of Pharos (see referenced website, below) to the mainland. Since then sedimentary deposits have widened the mole. Since 1905, when the 370,000 Alexandrians lived in an area of about 4 sq km between the two harbors, the city (population 4 million; see referenced website, below) has grown beyond its medieval walls and now occupies an area of about 300 sq km. The Mahmudiya Canal, connecting Alexandria with the Nile, runs to the south of the city and, by a series of locks, enters the harbor of the principal port of Egypt (note ships). The reddish and ochre polygons west of Lake Mariout are salt-evaporation, chemical-storage, and water-treatment ponds within the coastal lagoon. Reference Youssef Halim and Fatma Abou Shouk, 2000, Human impacts on Alexandria's marine environment: UNESCO, Coastal Regions and Small Islands Unit (CSI), Coastal Management Sourcebooks 2 (accessed December 20, 2000) Additional photographs taken by astronauts can be viewed at NASA-JSC's Gateway to Astronaut Photography of Earth. Image ISS001-ESC-5025 provided by the Earth Sciences and Image Analysis Laboratory, Johnson Space Center.

  1. Is there a paraneoplastic ALS?

    PubMed

    Corcia, Philippe; Gordon, Paul H; Camdessanche, Jean-Philippe

    2015-06-01

    Our objective was to examine the strength of evidence in support of the paraneoplastic syndrome (PNS) as one cause of ALS and, if the association appears more likely than chance, determine which features of ALS imply concurrent malignancy. We reviewed the literature on concurrent ALS and neoplasia assessing the strength of evidence for the association. Most accounts of ALS and neoplasm are case reports or small uncontrolled series. In order of strength of evidence, three clinical situations that support a paraneoplastic aetiology for ALS are: 1) laboratory evidence of well-characterized onconeuronal antibodies, most often anti-Hu, anti-Yo or anti-Ri; 2) co-occurrence of ALS and a neoplasm known to cause PNS, usually lymphoma or cancer of the breast; and 3) combined ALS and a neoplasm not classically associated with PNS, without detectable onconeuronal antibodies. Clinical features that warrant evaluation of neoplasm include upper motor neuron disease in elderly females, rapid progression, non-motor signs, and young onset. In conclusion, most examples of ALS and neoplasm do not constitute a classically established PNS. Rare instances of elevated onconeuronal antibody titres or typical neoplasm, implies that, albeit rare, the PNS is one of a multitude of causes of ALS.

  2. Understanding ALS: new therapeutic approaches.

    PubMed

    Musarò, Antonio

    2013-09-01

    Amyotrophic lateral sclerosis (ALS) is a fatal neurodegenerative disease associated with motor neuron degeneration, muscle atrophy and paralysis. Although numerous pathological mechanisms have been elucidated, ALS remains an invariably fatal disease in the absence of any effective therapy. The heterogeneity of the disease and the failure to develop satisfactory therapeutic protocols reinforce the view that ALS is a multi-factorial and multi-systemic disease. Thus, a better understanding of the pathogenic mechanisms and study of the potential pathological relationship between the various cellular processes is required to ensure efficacious therapy. The pathogenic mechanisms associated with ALS are reviewed, and the strengths and limitations of some new therapeutic approaches are discussed.

  3. Impurity Enhancement of Al_2O_3/Al Adhesion

    NASA Astrophysics Data System (ADS)

    Wang, Xiao-Gang; Smith, John R.; Zhang, Wenqing; Evans, Anthony

    2003-03-01

    Our first-principles computations indicate that the clean Al_2O_3/Al interface is relatively weak - weaker than bulk Al. Fracture experiments reveal that the interface is relatively strong with observed failure in bulk Al, however. This paradox is resolved via doping effects of the common impurity C. We have found that only 1/3 of a monolayer of carbon segregated to the interface can increase the work of separation by a factor of 3. The resulting strong interface is consistent with fracture experiments. It arises due to void formation in the interface, which provides low-strain sites for the carbon to segregate to. The degree of void formation is consistent with the relatively high heat of oxide formation of Al.

  4. Interfacial characterization of Al-Al thermocompression bonds

    SciTech Connect

    Malik, N.; Carvalho, P. A.; Poppe, E.; Finstad, T. G.

    2016-05-28

    Interfaces formed by Al-Al thermocompression bonding were studied by the transmission electron microscopy. Si wafer pairs having patterned bonding frames were bonded using Al films deposited on Si or SiO{sub 2} as intermediate bonding media. A bond force of 36 or 60 kN at bonding temperatures ranging from 400–550 °C was applied for a duration of 60 min. Differences in the bonded interfaces of 200 μm wide sealing frames were investigated. It was observed that the interface had voids for bonding with 36 kN at 400 °C for Al deposited both on Si and on SiO{sub 2}. However, the dicing yield was 33% for Al on Si and 98% for Al on SiO{sub 2}, attesting for the higher quality of the latter bonds. Both a bond force of 60 kN applied at 400 °C and a bond force of 36 kN applied at 550 °C resulted in completely bonded frames with dicing yields of, respectively, 100% and 96%. A high density of long dislocations in the Al grains was observed for the 60 kN case, while the higher temperature resulted in grain boundary rotation away from the original Al-Al interface towards more stable configurations. Possible bonding mechanisms and reasons for the large difference in bonding quality of the Al films deposited on Si or SiO{sub 2} are discussed.

  5. Climate and Conflict: A Comment on Hsiang et al.s Reply to Buhaug et al

    DTIC Science & Technology

    2014-01-01

    a wide range of climatic events, from heat waves via excess rainfall to global ENSO cycles; and a wide range of spatial scales, from municipalities...again analytical consistency; The Hsiang et al. (2011) study considers a global ENSO effect whereas the studies in the valid sample investigate a local...some of the studies described in Hsiang et al. (2013). Specifically, Buhaug et al. exclude the effects of ENSO and PDSI when estimating the aggregate

  6. Thermal Modeling of Al-Al and Al-Steel Friction Stir Spot Welding

    NASA Astrophysics Data System (ADS)

    Jedrasiak, P.; Shercliff, H. R.; Reilly, A.; McShane, G. J.; Chen, Y. C.; Wang, L.; Robson, J.; Prangnell, P.

    2016-09-01

    This paper presents a finite element thermal model for similar and dissimilar alloy friction stir spot welding (FSSW). The model is calibrated and validated using instrumented lap joints in Al-Al and Al-Fe automotive sheet alloys. The model successfully predicts the thermal histories for a range of process conditions. The resulting temperature histories are used to predict the growth of intermetallic phases at the interface in Al-Fe welds. Temperature predictions were used to study the evolution of hardness of a precipitation-hardened aluminum alloy during post-weld aging after FSSW.

  7. Explosive destruction of 26Al

    NASA Astrophysics Data System (ADS)

    Kahl, D.; Yamaguchi, H.; Shimizu, H.; Abe, K.; Beliuskina, O.; Cha, S. M.; Chae, K. Y.; Ge, Z.; Hayakawa, S.; Kwag, M. S.; Kim, D. H.; Moon, J. Y.; Park, S. Y.; Yang, L.

    2017-09-01

    The γ -ray emission associated with the radioactive decay of 26Al is one of the key pieces of observational evidence indicating stellar nucleosynthesis is an ongoing process in our Galaxy, and it was the first such radioactivity to be detected. Despite numerous efforts in stellar modeling, observation, nuclear theory, and nuclear experiment over the past four decades, the precise sites and origin of Galactic ^{26} Al remain elusive. We explore the present experimental knowledge concerning the destruction of ^{26} Al in massive stars. The precise stellar rates of neutron-induced reactions on ^{26} Al, such as (n,p) and (n, α , have among the largest impacts on the total ^{26} Al yield. Meanwhile, reactions involving the short-lived isomeric state of ^{26} Al such as radiative proton capture are highly-uncertain at present. Although we presented on-going experimental work from n_TOF at CERN with an ^{26} Al target, the present proceeding focuses only on the ^{26} Al isomeric radioactive beam production aspect and the first experimental results at CRIB.

  8. Philosophieren als Unterrichtsprinzip im Mathematikunterricht

    NASA Astrophysics Data System (ADS)

    Meerwaldt, Diana

    Philosophieren und Mathematik scheinen zunächst gegensätzliche Bereiche zu sein, die sich kaum vereinbaren lassen. Dies trifft für eine Auffassung zu, die Philosophieren als "Gerede" disqualifiziert und Mathematik als eine reine "Formelwissenschaft" begreift. Beide Auffassungen werden den Gegenständen nicht gerecht.

  9. Characteristics of CeCoIn5/Al/AlOx/Nb and CeCoIn5/Al/AlOx/Al Tunnel Junctions

    SciTech Connect

    Petrovic, C.; Nevirkovets, I.P.; Chernyashevskyy, O.; Hu, R.; Ketterson, J.B.; Sarma, B.K.

    2009-03-03

    We report characteristics of CeCoIn{sub 5}/Al/AlO{sub x}/Nb and CeCoIn{sub 5}/Al/AlO{sub x}/Al tunnel junctions fabricated on the (0 0 1) surface of CeCoIn{sub 5} crystal platelets. The main result of this work is the observation of a low Josephson current (as compared with that expected from the Ambegaokar-Baratoff formula), which is consistent with idea that the order parameter in the heavy-fermion superconductor CeCoIn{sub 5} has unconventional pairing symmetry.

  10. Medical application of 26Al

    NASA Astrophysics Data System (ADS)

    Steinhausen, C.; Gerisch, P.; Heisinger, B.; Hohl, Ch.; Kislinger, G.; Korschinek, G.; Niedermayer, M.; Nolte, E.; Dumitru, M.; Alvarez-Brückmann, M.; Schneider, M.; Ittel, T. H.

    1996-06-01

    Accelerator mass spectrometry (AMS) measurements with 26Al as tracer were performed in order to study the aluminium metabolism and anomalies in the human body and in rats. In particular, the differences between healthy volunteers and patients with renal failure were investigated. The obtained data points of 26Al in blood and urine were described by an open compartment model with three peripheral compartments. It was found that the minimum of peripheral compartments needed to describe 26Al concentrations in blood and urine over a time period of three years is at least three.

  11. Reply to Gopalswamy et al.

    NASA Technical Reports Server (NTRS)

    Cane, H. V.; Richardson, I. G.

    2003-01-01

    The comment of Gopalswamy et al. (thereafter GMY) relates to a letter discussing coronal mass ejections (CMEs), interplanetary ejecta and geomagnetic storms. GMY contend that Cane et al. incorrectly identified ejecta (interplanetary CMEs) and hypothesize that this is because Cane et al. fail to understand how to separate ejecta from "shock sheaths" when interpreting solar wind and energetic particle data sets. They (GMY) are wrong be cause the relevant section of the paper was concerned with the propagation time to 1 AU of any potentially geoeffective structures caused by CMEs, i.e. upstream compression regions with or without shocks, or ejecta. In other words, the travel times used by Cane et al. were purposefully and deliberately distinct from ejecta travel times (except for those slow ejecta, approx. 30% of their events, which generated no upstream features), and no error in identification was involved. The confusion of GMY stems from the description did not characterize the observations sufficiently clearly.

  12. In memory of Al Cameron

    NASA Astrophysics Data System (ADS)

    Cowan, John; Truran, James W.

    Al Cameron, who died recently (October 3, 2005) at 80, was one of the giants in astrophysics. His insights were profound and his interests were wide-ranging. Originally trained as a nuclear physicist, he made major contributions in a number of fields, including nuclear reactions in stars, nucleosynthesis, the abundances of the elements in the Solar System, and the origin of the Solar System and the Moon. In 1957, Cameron and, independently, Burbidge, Burbidge, Fowler and Hoyle, wrote seminal papers on nuclear astrophysics. Most of our current ideas concerning ele- ment formation in stars have followed from those two pioneering and historical works. Al also made many contributions in the field of Solar System physics. Particularly noteworthy in this regard was Cameron's work on the formation of the Moon. Al was also a good friend and mentor of young people. Al Cameron will be missed by many in the community both for his scientific contributions and for his friendship.

  13. Al-Co-Fe (030)

    NASA Astrophysics Data System (ADS)

    Carow-Watamura, U.; Louzguine, D. V.; Takeuchi, A.

    This document is part of Part 1 http://dx.doi.org/10.1007/9getType="URL"/> 'Systems from Ag-Al-Ca to Au-Pd-Si' of Subvolume B 'Physical Properties of Ternary Amorphous Alloys' of Volume 37 'Phase Diagrams and Physical Properties of Nonequilibrium Alloys' of Landolt-Börnstein - Group III 'Condensed Matter'. It contains the Chapter 'Al-Co-Fe (030)' with the content:

  14. Al-La-Nb (068)

    NASA Astrophysics Data System (ADS)

    Carow-Watamura, U.; Louzguine, D. V.; Takeuchi, A.

    This document is part of Part 1 http://dx.doi.org/10.1007/97.etType="URL"/> 'Systems from Ag-Al-Ca to Au-Pd-Si' of Subvolume B 'Physical Properties of Ternary Amorphous Alloys' of Volume 37 'Phase Diagrams and Physical Properties of Nonequilibrium Alloys' of Landolt-Börnstein - Group III 'Condensed Matter'. It contains the Chapter 'Al-La-Nb (068)' with the content:

  15. Al-Cu-Zr (050)

    NASA Astrophysics Data System (ADS)

    Carow-Watamura, U.; Louzguine, D. V.; Takeuchi, A.

    This document is part of Part 1 http://dx.doi.org/10.1007/9getType="URL"/> 'Systems from Ag-Al-Ca to Au-Pd-Si' of Subvolume B 'Physical Properties of Ternary Amorphous Alloys' of Volume 37 'Phase Diagrams and Physical Properties of Nonequilibrium Alloys' of Landolt-Börnstein - Group III 'Condensed Matter'. It contains the Chapter 'Al-Cu-Zr (050)' with the content:

  16. Al-La-Ni (069)

    NASA Astrophysics Data System (ADS)

    Carow-Watamura, U.; Louzguine, D. V.; Takeuchi, A.

    This document is part of Part 1 http://dx.doi.org/10.1007/9getType="URL"/> 'Systems from Ag-Al-Ca to Au-Pd-Si' of Subvolume B 'Physical Properties of Ternary Amorphous Alloys' of Volume 37 'Phase Diagrams and Physical Properties of Nonequilibrium Alloys' of Landolt-Börnstein - Group III 'Condensed Matter'. It contains the Chapter 'Al-La-Ni (069)' with the content:

  17. Al-Au-La (010)

    NASA Astrophysics Data System (ADS)

    Carow-Watamura, U.; Louzguine, D. V.; Takeuchi, A.

    This document is part of Part 1 http://dx.doi.org/10.1007/9getType="URL"/> 'Systems from Ag-Al-Ca to Au-Pd-Si' of Subvolume B 'Physical Properties of Ternary Amorphous Alloys' of Volume 37 'Phase Diagrams and Physical Properties of Nonequilibrium Alloys' of Landolt-Börnstein - Group III 'Condensed Matter'. It contains the Chapter 'Al-Au-La (010)' with the content:

  18. Al-Ce-V (029)

    NASA Astrophysics Data System (ADS)

    Carow-Watamura, U.; Louzguine, D. V.; Takeuchi, A.

    This document is part of Part 1 http://dx.doi.org/10.1007/97.etType="URL"/> 'Systems from Ag-Al-Ca to Au-Pd-Si' of Subvolume B 'Physical Properties of Ternary Amorphous Alloys' of Volume 37 'Phase Diagrams and Physical Properties of Nonequilibrium Alloys' of Landolt-Börnstein - Group III 'Condensed Matter'. It contains the Chapter 'Al-Ce-V (029)' with the content:

  19. ALS: focus on purinergic signalling.

    PubMed

    Volonté, Cinzia; Apolloni, Savina; Carrì, Maria Teresa; D'Ambrosi, Nadia

    2011-10-01

    Amyotrophic lateral sclerosis (ALS) is one of the most common neuromuscular diseases. It is devastating and fatal, causing progressive paralysis of all voluntary muscles and eventually death, while sparing cognitive functions. A pathological hallmark of ALS is neuroinflammation mediated by non-neuronal cells in the nervous system, such as microglia and astrocytes that accelerate the disease progression. Scientists have neither found a unique key mechanism, nor an effective treatment against ALS, supposedly because it is a multi-factorial and multi-systemic disease. Extracellular purines and pyrimidines are widespread and powerful physiopathological molecules, signalling to most cell types and directing cell-to-cell communication networks. They are instrumental for instance for neurotransmission, muscle contraction and immune surveillance. Recent work has reported the crucial involvement of purinergic pathways in many neurodegenerative and neuroinflammatory diseases, comprising ALS. Especially P2 receptors for ATP, P1 receptors for adenosine, and nucleotide transporters were found to be modulated in ALS cells and tissues, playing a potential role in the disease. Given the composite cellular cross-talk occurring during ALS and the established action of extracellular purines/pyrimidines as neuron-to-glia alarm signal in the nervous system, a mutual query in these two fields should now be whether, how and when purinergic would meet ALS. In this review, we will highlight the early cellular and molecular purinergic cross-talk that participates to ALS etiopathology, with the conviction that better understanding of purinergic dynamics might provide original research perspectives, stimulate alternative disease modelling, and the design and testing of more powerful targeted therapeutics against this relentlessly progressive disorder. Copyright © 2011 Elsevier Inc. All rights reserved.

  20. Para-hydrogen narrow filament evaporation at low temperature

    NASA Astrophysics Data System (ADS)

    Elizarova, T. G.; Gogolin, A. A.; Montero, S.

    2012-11-01

    Undercooling of liquid para-hydrogen (pH2) below its freezing point at equilibrium (13.8 K) has been shown recently in flowing micro-filaments evaporating in low density background gas [M. Kühnel et al, Phys. Rev. Lett. 106, 245301 (2011)]. An hydrodynamical model accounting for this process is reported here. Analytical expressions for the local temperature T of a filament, averaged over its cross section, are obtained as a function of distance z to the nozzle. Comparison with the experiment is shown. It is shown also that the thermocapillary forces induce a parabolic profile of velocity across the jet.

  1. Mensaje para alumnos y padres

    NASA Image and Video Library

    El astronauta de la NASA José Hernández alienta a los estudiantes a que sigan sus sueños. Hernández también habla acerca del papel que juegan los padres para ayudar a que sus hijos hagan realidad s...

  2. Comparing the Thermodynamic Behaviour of Al(1)+ZrO2(s) to Al(1)+Al2O3(s)

    NASA Technical Reports Server (NTRS)

    Copland, Evan

    2004-01-01

    In an effort to better determine the thermodynamic properties of Al(g) and Al2O(g). the vapor in equilibrium with Al(l)+ZrO2(s) was compared to the vapor in equilibrium with Al(l)+Al2O3(s) over temperature range 1197-to-1509K. The comparison was made directly by Knudsen effusion-cell mass spectrometry with an instrument configured for a multiple effusion-cell vapor source (multi-cell KEMS). Second law enthalpies of vaporization of Al(g) and Al2O(g) together with activity measurements show that Al(l)+ZrO2(s) is thermodynamically equivalent to Al(l)+Al2O3(s), indicating Al(l) remained pure and Al2O3(s) was present in the ZrO2-cell. Subsequent observation of the Al(l)/ZrO2 and vapor/ZrO2 interfaces revealed a thin Al2O3-layer had formed, separating the ZrO2-cell from Al(l) and Al(g)+Al2O(g), effectively transforming it into an Al2O3 effusion-cell. This behavior agrees with recent observations made for Beta-NiAl(Pt) alloys measured in ZrO2 effusion-cell.

  3. Ab initio modeling of zincblende AlN layer in Al-AlN-TiN multilayers

    SciTech Connect

    Yadav, S. K. E-mail: yadav.satyesh@gmail.com Liu, X.-Y. E-mail: yadav.satyesh@gmail.com; Wang, J.

    2016-06-14

    An unusual growth mechanism of metastable zincblende AlN thin film by diffusion of nitrogen atoms into Al lattice is established. Using first-principles density functional theory, we studied the possibility of thermodynamic stability of AlN as a zincblende phase due to epitaxial strains and interface effect, which fails to explain the formation of zincblende AlN. We then compared the formation energetics of rocksalt and zincblende AlN in fcc Al through direct diffusion of nitrogen atoms to Al octahedral and tetrahedral interstitials. The formation of a zincblende AlN thin film is determined to be a kinetically driven process, not a thermodynamically driven process.

  4. A solid state NMR study of layered double hydroxides intercalated with para-amino salicylate, a tuberculosis drug.

    PubMed

    Jensen, Nicholai Daugaard; Bjerring, Morten; Nielsen, Ulla Gro

    2016-09-01

    Para-amino salicylate (PAS), a tuberculosis drug, was intercalated in three different layered double hydroxides (MgAl, ZnAl, and CaAl-LDH) and the samples were studied by multi-nuclear ((1)H, (13)C, and (27)Al) solid state NMR (SSNMR) spectroscopy in combination with powder X-ray diffraction (PXRD), elemental analysis and IR-spectroscopy to gain insight into the bulk and atomic level structure of these LDHs especially with a view to the purity of the LDH-PAS materials and the concentration of impurities. The intercalations of PAS in MgAl-, ZnAl-, and CaAl-LDH's were confirmed by (13)C SSNMR and PXRD. Moreover, (13)C MAS NMR and infrared spectroscopy show that PAS did not decompose during synthesis. Large amounts (20-41%) of amorphous aluminum impurities were detected in the structure using (27)Al single pulse and 3QMAS NMR spectra, which in combination with (1)H single and double quantum experiments also showed that the M(II):Al ratio was higher than predicted from the bulk metal composition of MgAl-PAS and ZnAl-PAS. Moreover, the first high-resolution (1)H SSNMR spectra of a CaAl LDH is reported and assigned using (1)H single and double quantum experiments in combination with (27)Al{(1)H} HETCOR.

  5. Benefits for Military Veterans with ALS

    MedlinePlus

    ... and Caregivers Newly Diagnosed Clinical Trials Familial ALS Military Veterans For Caregivers Resources Read stories from families living with ALS ALS Registry Augmentative Communication Site Map | Press Room | FAQ | Policies | RSS | Contact ...

  6. Response to Zambon et al.

    PubMed

    Laplante, Caroline; Pollard, Thomas D

    2017-02-06

    Stimulated by our 2015 Current Biology paper [1], Zambon et al. reinvestigated how three myosin isoforms participate in the formation and constriction of the contractile ring in fission yeast. Our paper presented evidence that these myosin isoforms have distinct roles: "Conventional myosin-II Myo2 is crucial to ring assembly, unconventional myosin-II Myp2 is most important for ring constriction, and type V myosin Myo51 aids the other two myosins." Zambon et al. used different markers to reexamine the contributions of the three myosins to cytokinesis and concluded "that Myo2p is the major motor involved in ring contraction in S. pombe." Here, we show that most of the differences observed by Zambon et al. can be attributed to their use of the Rlc1p-3GFP marker, which genetically interacts with myo2-E1. Copyright © 2017 Elsevier Ltd. All rights reserved.

  7. FTD and ALS: genetic ties that bind.

    PubMed

    Orr, Harry T

    2011-10-20

    Curiously, amyotrophic lateral sclerosis (ALS) and frontotemporal dementia (FTD), seemingly disparate neurodegenerative disorders, can be inherited together. Two groups (DeJesus-Hernandez et al. and Renton et al.) show that the long sought after ALS/FTD mutation on chromosomal region 9p is a hexanucleotide expansion in C90RF72. These studies, plus a study on X-linked ALS/FTD, provide molecular starting points for identifying pathways that link ALS and FTD pathogenesis.

  8. Superconductivity in Al/Al2O3 interface

    NASA Astrophysics Data System (ADS)

    Palnichenko, A. V.; Vyaselev, O. M.; Mazilkin, A. A.; Khasanov, S. S.

    2016-06-01

    Metastable superconductivity at Tc ≈ 65 K has been observed in Al foil subjected to special oxidation process, according to the ac magnetic susceptibility and electrical resistance measurements. Comparison of the ac susceptibility and the dc magnetization measurements infers that the superconductivity arises within the interfacial granular layer formed during the oxidation process between metallic aluminum and its oxide.

  9. Baumard et al.'s moral markets lack market dynamics.

    PubMed

    Fessler, Daniel M T; Holbrook, Colin

    2013-02-01

    Market models are indeed indispensable to understanding the evolution of cooperation and its emotional substrates. Unfortunately, Baumard et al. eschew market thinking in stressing the supposed invariance of moral/cooperative behavior across circumstances. To the contrary, humans display contingent morality/cooperation, and these shifts are best accounted for by market models of partner choice for mutually beneficial collaboration.

  10. ALS - A unique design approach

    NASA Astrophysics Data System (ADS)

    Chamberlain, Roger A.

    1990-09-01

    An advanced launch system (ALS), which is intended to be flexible and to deliver a wide range of payloads at a reduced cost, is discussed. The ALS concept also features total quality management, modular subsystems, standardized interfaces, standardized missions, and off-line payload encapsulation. The technological improvements include manufacturing of dry structures, use of composite materials, adaptive guidance and control systems, and laser-initiated radar systems. The operational improvements range from paperless management, to rocket engine leak detection devices and automated ground operations.

  11. Wadi Al Dawasir, Saudi Arabia

    NASA Image and Video Library

    2015-10-20

    In the middle of the Arabian desert the city Green Oasis Wadi Al Dawasir is being developed as a new urban center for the Wadi Al Dawasir region of Saudi Arabia, as shown in this image from NASA Terra spacecraft. Huge solar fields supply the entire city and the surrounding region with energy. Hundreds of circular agricultural fields are fed by center pivot irrigation apparatus, drawing water from subterranean aquifers. The image was acquired March 30, 2013, covers an area of 30 x 45 km, and is located at 20.2 degrees north, 44.8 degrees east. http://photojournal.jpl.nasa.gov/catalog/PIA20077

  12. Unsolvated Al(C6F5)3: structural features and electronic interaction with ferrocene.

    PubMed

    Chen, Jiawei; Chen, Eugene Y-X

    2016-04-14

    Alkyl/aryl ligand exchange between AlEt3 and B(C6F5)3 in hexanes enables the formation and isolation of the unsolvated Al(C6F5)3 as a crystalline solid, the structure of which has been determined by single-crystal X-ray diffraction analysis. Instead of forming the anticipated AlF contacts with the seemingly more accessible meta- and para-F's of -C6F5 groups, two Al(C6F5)3 molecules form a dimeric structure with double AlF interactions between the Al center of one molecule and the ortho-F atom of the -C6F5 group on the other molecule. This mode of interactions is apparently linked to the thermal and shock sensitivity of the unsolvated Al(C6F5)3 in the solid state. To compare with the B(C6F5)3/ferrocene frustrated Lewis pair system, the complexation between Al(C6F5)3 and ferrocene has also been studied, which affords a stable adduct formed through the η(1)-coordination of Al to one of the CCp atoms, similar to the alane-toluene or benzene complex.

  13. Al-Qaeda as Insurgency

    DTIC Science & Technology

    2005-03-18

    that directs military conduct; instead, in the words of Regis Debray “. . . the guerrilla force is the party in embryo.” Regis Debray , Revolution in...Jenkins. Deterrence and Influence in Counterterrorism: A Component in the War on al Qaeda . Santa Monica, CA: RAND, 2002. Debray , Regis . Revolution in

  14. Response to Moras et al.

    PubMed

    Rastinejad, Fraydoon; Ollendorff, Vincent; Polikarpov, Igor

    2015-06-01

    We recently reviewed full-length nuclear receptor (NR) structures in an Opinion article wherein we carefully evaluated a large body of literature. As heads of three separate laboratories working on NR architectures, we expressed our shared insights and critical comments. One group (Moras et al.) has declined to accept our strong concerns about several of their published reports. We comment on their letter.

  15. Dynamic Modeling of ALS Systems

    NASA Technical Reports Server (NTRS)

    Jones, Harry

    2002-01-01

    The purpose of dynamic modeling and simulation of Advanced Life Support (ALS) systems is to help design them. Static steady state systems analysis provides basic information and is necessary to guide dynamic modeling, but static analysis is not sufficient to design and compare systems. ALS systems must respond to external input variations and internal off-nominal behavior. Buffer sizing, resupply scheduling, failure response, and control system design are aspects of dynamic system design. We develop two dynamic mass flow models and use them in simulations to evaluate systems issues, optimize designs, and make system design trades. One model is of nitrogen leakage in the space station, the other is of a waste processor failure in a regenerative life support system. Most systems analyses are concerned with optimizing the cost/benefit of a system at its nominal steady-state operating point. ALS analysis must go beyond the static steady state to include dynamic system design. All life support systems exhibit behavior that varies over time. ALS systems must respond to equipment operating cycles, repair schedules, and occasional off-nominal behavior or malfunctions. Biological components, such as bioreactors, composters, and food plant growth chambers, usually have operating cycles or other complex time behavior. Buffer sizes, material stocks, and resupply rates determine dynamic system behavior and directly affect system mass and cost. Dynamic simulation is needed to avoid the extremes of costly over-design of buffers and material reserves or system failure due to insufficient buffers and lack of stored material.

  16. AlGaN solar-blind avalanche photodiodes with AlInN/AlGaN distributed Bragg reflectors

    NASA Astrophysics Data System (ADS)

    Yao, Chujun; Ye, Xuanchao; Sun, Rui; Yang, Guofeng; Wang, Jin; Lu, Yanan; Yan, Pengfei; Cao, Jintao

    2017-06-01

    AlGaN solar-blind avalanche photodiodes (APDs) with AlInN/AlGaN distributed Bragg reflectors (DBRs) operated at lower avalanche breakdown voltage are numerically demonstrated. The p-type AlGaN layer and the multiplicative layer with low Al composition are introduced to construct the polarization-induced electric field, which can significantly reduce the avalanche breakdown voltage of the APDs. Calculated results exhibit that the avalanche breakdown voltage of the designed APDs decrease by 13% compared with the conventional device structure. Simultaneously, an improved solar-blind spectral responsivity is achieved due to the inserted AlInN/AlGaN DBRs.

  17. Large rectification magnetoresistance in nonmagnetic Al/Ge/Al heterojunctions

    NASA Astrophysics Data System (ADS)

    Zhang, Kun; Li, Huan-Huan; Grünberg, Peter; Li, Qiang; Ye, Sheng-Tao; Tian, Yu-Feng; Yan, Shi-Shen; Lin, Zhao-Jun; Kang, Shi-Shou; Chen, Yan-Xue; Liu, Guo-Lei; Mei, Liang-Mo

    2015-09-01

    Magnetoresistance and rectification are two fundamental physical properties of heterojunctions and respectively have wide applications in spintronics devices. Being different from the well known various magnetoresistance effects, here we report a brand new large magnetoresistance that can be regarded as rectification magnetoresistance: the application of a pure small sinusoidal alternating-current to the nonmagnetic Al/Ge Schottky heterojunctions can generate a significant direct-current voltage, and this rectification voltage strongly varies with the external magnetic field. We find that the rectification magnetoresistance in Al/Ge Schottky heterojunctions is as large as 250% at room temperature, which is greatly enhanced as compared with the conventional magnetoresistance of 70%. The findings of rectification magnetoresistance open the way to the new nonmagnetic Ge-based spintronics devices of large rectification magnetoresistance at ambient temperature under the alternating-current due to the simultaneous implementation of the rectification and magnetoresistance in the same devices.

  18. Large rectification magnetoresistance in nonmagnetic Al/Ge/Al heterojunctions

    PubMed Central

    Zhang, Kun; Li, Huan-huan; Grünberg, Peter; Li, Qiang; Ye, Sheng-tao; Tian, Yu-feng; Yan, Shi-shen; Lin, Zhao-jun; Kang, Shi-shou; Chen, Yan-xue; Liu, Guo-lei; Mei, Liang-mo

    2015-01-01

    Magnetoresistance and rectification are two fundamental physical properties of heterojunctions and respectively have wide applications in spintronics devices. Being different from the well known various magnetoresistance effects, here we report a brand new large magnetoresistance that can be regarded as rectification magnetoresistance: the application of a pure small sinusoidal alternating-current to the nonmagnetic Al/Ge Schottky heterojunctions can generate a significant direct-current voltage, and this rectification voltage strongly varies with the external magnetic field. We find that the rectification magnetoresistance in Al/Ge Schottky heterojunctions is as large as 250% at room temperature, which is greatly enhanced as compared with the conventional magnetoresistance of 70%. The findings of rectification magnetoresistance open the way to the new nonmagnetic Ge-based spintronics devices of large rectification magnetoresistance at ambient temperature under the alternating-current due to the simultaneous implementation of the rectification and magnetoresistance in the same devices. PMID:26387967

  19. Large rectification magnetoresistance in nonmagnetic Al/Ge/Al heterojunctions.

    PubMed

    Zhang, Kun; Li, Huan-Huan; Grünberg, Peter; Li, Qiang; Ye, Sheng-Tao; Tian, Yu-Feng; Yan, Shi-Shen; Lin, Zhao-Jun; Kang, Shi-Shou; Chen, Yan-Xue; Liu, Guo-Lei; Mei, Liang-Mo

    2015-09-21

    Magnetoresistance and rectification are two fundamental physical properties of heterojunctions and respectively have wide applications in spintronics devices. Being different from the well known various magnetoresistance effects, here we report a brand new large magnetoresistance that can be regarded as rectification magnetoresistance: the application of a pure small sinusoidal alternating-current to the nonmagnetic Al/Ge Schottky heterojunctions can generate a significant direct-current voltage, and this rectification voltage strongly varies with the external magnetic field. We find that the rectification magnetoresistance in Al/Ge Schottky heterojunctions is as large as 250% at room temperature, which is greatly enhanced as compared with the conventional magnetoresistance of 70%. The findings of rectification magnetoresistance open the way to the new nonmagnetic Ge-based spintronics devices of large rectification magnetoresistance at ambient temperature under the alternating-current due to the simultaneous implementation of the rectification and magnetoresistance in the same devices.

  20. AlSb/InAs/AlSb quantum wells

    NASA Technical Reports Server (NTRS)

    Kroemer, Herbert

    1990-01-01

    Researchers studied the InAs/AlSb system recently, obtaining 12nm wide quantum wells with room temperature mobilities up to 28,000 cm(exp 2)/V center dot S and low-temperature mobilities up to 325,000 cm(exp 2)/V center dot S, both at high electron sheet concentrations in the 10(exp 12)/cm(exp 2) range (corresponding to volume concentrations in the 10(exp 18)/cm(exp 2) range). These wells were not intentionally doped; the combination of high carrier concentrations and high mobilities suggest that the electrons are due to not-intentional modulation doping by an unknown donor in the AlSb barriers, presumably a stoichiometric defect, like an antisite donor. Inasmuch as not intentionally doped bulk AlSb is semi-insulating, the donor must be a deep one, being ionized only by draining into the even deeper InAs quantum well. The excellent transport properties are confirmed by other observations, like excellent quantum Hall effect data, and the successful use of the quantum wells as superconductive weak links between Nb electrodes, with unprecendentedly high critical current densities. The system is promising for future field effect transistors (FETs), but many processing problems must first be solved. Although the researchers have achieved FETs, the results so far have not been competitive with GaAs FETs.

  1. Thermal conductance of a pressed Al-Al contact

    NASA Astrophysics Data System (ADS)

    Wanner, M.

    1981-01-01

    Thermal conductance of a screw-fastened joint between two blocks of Al-alloys has been measured. An AlMg4.5Mn-block, the end of which is cooled by liquid helium, constitutes the upper part of the sample and the contact is formed at the face surface of a cylindrical extension of that block onto which a cylinder, made of AlMgSi1, is pressed by means of a copper-nickel screw. Pressing of the contact was carried out at room temperature by applying a defined torque, M, to the fastening screw. Three samples of the same shape but with differently treated surfaces of contact (machined flat, electro-chemically polished, with gold plated contacts) were studied. The results showed that the machined flat surfaces yield the best contact and that the contact conductance (measured in the range 4.2 K to 1.8 K) of all samples increased with increasing torque. In addition to thermal measurements, a study of the electrical conductance would be very interesting to determine the different contributions of phonon and electron heat conduction by means of the Wiedemann-Franz law. The work is useful for the GIRL (German Infra-Red Laboratory) space experiment.

  2. Effect of interface geometry on electron tunnelling in Al/Al2O3/Al junctions

    NASA Astrophysics Data System (ADS)

    Koberidze, M.; Feshchenko, A. V.; Puska, M. J.; Nieminen, R. M.; Pekola, J. P.

    2016-04-01

    We investigate how different interface geometries of an Al/Al2O3 junction, a common component of modern tunnel devices, affect electron transport through the tunnel barrier. We study six distinct Al/Al2O3 interfaces which differ in stacking sequences of the metal and the oxide surface atoms and the oxide termination. To construct model potential barrier profiles for each examined geometry, we rely on first-principles density-functional theory (DFT) calculations for the barrier heights and the shapes of the interface regions as well as on experimental data for the barrier widths. We show that even tiny variations in the atomic arrangement at the interface cause significant changes in the tunnel barrier parameters and, consequently, in electron transport properties. Especially, we find that variations in the crucial barrier heights and widths can be as large as 2 eV and 5 Å, respectively. Finally, to gain information about the average properties of the measured junction, we fit the conductance calculated within the Wentzel-Kramers-Brillouin approximation to the experimental data and interpret the fit parameters with the help of the DFT results.

  3. Relativity and Al^+ Optical Clocks

    NASA Astrophysics Data System (ADS)

    Chou, Chin-Wen; Hume, David B.; Wineland, David J.; Rosenband, Till

    2010-03-01

    We have constructed an optical clock based on quantum logic spectroscopy of an Al+ ion that has a fractional frequency inaccuracy of 8.6x10-18. The frequency of the ^1S0<->^3P0 clock transition is compared to that of a previously constructed Al^+ optical clock with a statistical measurement uncertainty of 7.0x10-18. The two clocks exhibit a relative stability of 2.8x10-15&-1/2circ;, and a fractional frequency difference of -1.8x10-17, consistent with the accuracy limit of the older clock. By comparing the frequencies of the clocks, we have observed relativistic effects, such as time dilation due to velocities less than 10 m/s and the gravitational red shift from a 0.33 m height change of one of the clocks.

  4. Emerging mechanisms of molecular pathology in ALS

    PubMed Central

    Peters, Owen M.; Ghasemi, Mehdi; Brown, Robert H.

    2015-01-01

    Amyotrophic lateral sclerosis (ALS) is a devastating degenerative disease characterized by progressive loss of motor neurons in the motor cortex, brainstem, and spinal cord. Although defined as a motor disorder, ALS can arise concurrently with frontotemporal lobal dementia (FTLD). ALS begins focally but disseminates to cause paralysis and death. About 10% of ALS cases are caused by gene mutations, and more than 40 ALS-associated genes have been identified. While important questions about the biology of this disease remain unanswered, investigations of ALS genes have delineated pathogenic roles for (a) perturbations in protein stability and degradation, (b) altered homeostasis of critical RNA- and DNA-binding proteins, (c) impaired cytoskeleton function, and (d) non-neuronal cells as modifiers of the ALS phenotype. The rapidity of progress in ALS genetics and the subsequent acquisition of insights into the molecular biology of these genes provide grounds for optimism that meaningful therapies for ALS are attainable. PMID:25932674

  5. [Coagulation behavior of Al13 species].

    PubMed

    Hu, Cheng-zhi; Liu, Hui-juan; Qu, Jiu-hui

    2006-12-01

    Coagulation behavior of Al13 species was examined in synthetic water with high alkalinity and high humic acid concentration from viewpoint of the transformation of Al hydrolysis products during the coagulation process. The results indicated that coagulation efficiency of Al coagulants positively correlated with the content of Al13 in the coagulation process. Aluminum chloride (AlCl3) was more effective than polyaluminum chloride (PACI) in removing turbidity and dissolved organic matter in the synthetic water because AlCl3 could not only generate Al13 species but also function as pH control agent in the coagulation process. During coagulation process pH control can improve coagulation process through regulating Al speciation, and AlCl3 benefited most from pH control.

  6. Synthesis of AlN/Al Polycrystals along with Al Nanoparticles Using Thermal Plasma Route

    SciTech Connect

    Kanhe, Nilesh S.; Nawale, A. B.; Kulkarni, N. V.; Bhoraskar, S. V.; Mathe, V. L.; Das, A. K.

    2011-07-15

    This paper for the first time reports the (200) oriented growth of hexagonal Aluminum nitride crystals during synthesis of aluminum nanoparticles in dc transferred arc thermal plasma reactor by gas phase condensation in nitrogen plasma. The structural and morphological study of as synthesized AlN crystal and aluminium nanoparticles was done by using the x-ray diffraction method, scanning electron microscopy and transmission electron microscopy.

  7. Investigations of Al-Dalang and Al-Hawashat meteorites

    NASA Astrophysics Data System (ADS)

    Gismelseed, A. M.; Abdallah, S. B.; Al-Rawas, A. D.; Al-Mabsali, F. N.; Widatallah, H. M.; Elzain, M. E.; Yousif, A. A.; Ericsson, T.; Annersten, H.

    2016-12-01

    Mössbauer spectroscopy, X-ray diffraction (XRD) measurements, and electron microprobe analysis (EMPA) have been performed on two meteorites named Al-Dalang and Al-Hawashat after identifying their falling sites in the Western region of Sudan. These two meteorites are ordinary chondrites with similar mineralogy. XRD and EMPA show that the two specimens consist of primary olivine, ortho-pyroxene and later crystallising clino-pyroxene as reaction rims against plagioclase. Fe-metal phases are dominated by kamacite (≈6 wt.% Ni) and minor amounts of tetrataenite (≈52 wt.% Ni). Troilite (FeS) and alabandite (MnS) are optically observed as sulphide phases. The Mössbauer measurements at 295 and 78 K are in agreement with the above characterizations, showing at least two paramagnetic doublets which are assigned to olivine and pyroxene and magnetic sextets assigned to kamacite (hyperfine field ≈33.5 T) and troilite FeS (hyperfine field ≈31 T).

  8. Al-Al2O3-Pd junction hydrogen sensor

    NASA Astrophysics Data System (ADS)

    Okuyama, K.; Takinami, N.; Chiba, Y.; Ohshima, S.; Kambe, S.

    1994-07-01

    Al-Al2O3-Pd MIM (metal insulator metal) junctions fabricated on a glass substrate were tested as hydrogen sensors. The I-V (current versus voltage) characteristics of the junctions were measured at room temperature in a vacuum of 10-5 Torr and in H2 gas of 10-2-100 Torr. A significant increase in the current was observed upon introduction of H2 gas. This phenomenon is believed to occur due to the work function lowering of the hydrogen-absorbed Pd top electrode. The rise time was on the order of minutes, while the recovery time when hydrogen was purged was more than 20 h. However, when the junction was placed in an oxidizing ambient such as air, the recovery time was drastically reduced to the order of minutes, indicating that the device is operative as a hydrogen sensor in the atmospheric ambient. Hydrogen adsorption and desorption behavior of the Pd film was also investigated using a Pd coated quartz microbalance, and the results explained the current response of the Pd MIM junction to hydrogen in the presence of oxygen.

  9. Electronic spectroscopy of the Al +-Ar complex

    NASA Astrophysics Data System (ADS)

    Lei, Jie; Dagdigian, Paul J.

    1999-05-01

    The laser fluorescence excitation spectrum of the Al +-Ar complex near the Al + ion 3s3p 1P ← 3s 2 1S resonance transition is reported. An excited-state ( v', 0) progression and the (0, 1) hot band were observed. Rotational analysis revealed that these bands involve an electronic transition from the Al +-Ar X 1Σ+ ground state to the 1Σ+ state correlating with the Al +( 1P)+Ar asymptote. Rotational constants and upper-state vibrational constants and the dissociation energy were determined. The spectroscopic constants of the two observed Al +-Ar electronic states are compared with those for neutral AlAr states.

  10. Ab initio modeling of zincblende AlN layer in Al-AlN-TiN multilayers

    DOE PAGES

    Yadav, S. K.; Wang, J.; Liu, X. -Y.

    2016-06-13

    An unusual growth mechanism of metastable zincblende AlN thin film by diffusion of nitrogen atoms into Al lattice is established. Using first-principles density functional theory, we studied the possibility of thermodynamic stability of AlN as a zincblende phase due to epitaxial strains and interface effect, which fails to explain the formation of zincblende AlN. We then compared the formation energetics of rocksalt and zincblende AlN in fcc Al through direct diffusion of nitrogen atoms to Al octahedral and tetrahedral interstitials. Furthermore, the formation of a zincblende AlN thin film is determined to be a kinetically driven process, not a thermodynamicallymore » driven process.« less

  11. Remodelar Correctamente: Guía de Prácticas Acreditadas Seguras Para Trabajar Con Plomo

    EPA Pesticide Factsheets

    Información general sobre los requisitos legales de las prácticas relacionadas al manejo seguro del plomo para dueños de hogares, inquilinos, proveedores de cuido infantil, y padres durante las actividades de remodelación

  12. MoSI (Monitoreo de Sobrevivencia Invernal): assessing habitat-specific overwintering survival of neotropical migratory landbirds

    Treesearch

    David F. DeSante; T. Scott Sillett; Rodney B. Siegel; James F. Saracco; Claudia A. Romo de Vivar Alvarez; Salvadora Morales; Alexis Cerezo; Danielle R. Kaschube; Manuel Grosselet; Borja Mila

    2005-01-01

    Recent evidence suggests that population declines in many Neotropical-wintering migratory landbird species are caused by habitat loss and degradation on their wintering grounds. Such habitat loss and degradation can lower overwintering survival rates and cause surviving birds to leave their wintering grounds in poor physical condition, leading to high mortality during...

  13. Sobre la terapia génica para enfermedades de la retina.

    PubMed

    Fischer, M Dominik

    2017-07-11

    Las mutaciones en un gran número de genes provocan degeneración de la retina y ceguera sin que exista actualmente cura alguna. En las últimas décadas, la terapia génica para enfermedades de la retina ha evolucionado y se ha convertido en un nuevo y prometedor paradigma terapéutico para estas enfermedades poco comunes. Este artículo refleja las ideas y los conceptos que parten de la ciencia básica hacia la aplicabilidad de la terapia génica en el ámbito clínico. Se describen los avances y las reflexiones actuales sobre la eficacia de los ensayos clínicos en la actualidad y se discuten los posibles obstáculos y soluciones de cara al futuro de la terapia génica para enfermedades de la retina. © 2017 S. Karger AG, Basel.

  14. NiAl-base composite containing high volume fraction of AlN for advanced engines

    NASA Technical Reports Server (NTRS)

    Hebsur, Mohan (Inventor); Whittenbeger, John D. (Inventor); Lowell, Carl F. (Inventor)

    1994-01-01

    A particulate reinforced NiAl-AlN composite alloy has a NiAl matrix and greater than about 13 volume percent fine particles of AlN within the matrix. The particles preferably have a diameter from about 15 nanometers to about 50 nanometers. The particulate reinforced NiAl-AlN composite alloy may be prepared by cryomilling prealloyed NiAl in liquid nitrogen using grinding media having a diameter of from about 2 to 6 mm at an impeller speed of from about 450 RPM to about 800 RPM. The cryomilling may be done for a duration of from about 4 hours to about 20 hours to obtain a cryomilled powder. The cryomilled powder may be consolidated to form the particulate reinforced NiAl-AlN composite alloy. The particulate reinforced alloy can further include a toughening alloy. The toughening alloy may include NiCrAlY, FeCrAlY, and FeAl.

  15. Microstructure and Oxidation Behavior of Al and Al/NiCrAlY Coatings on Pure Titanium Alloy

    NASA Astrophysics Data System (ADS)

    Gong, Xue; Zhang, Nannan; Zhang, Zhongli; Chen, Ruirun; Lin, Danyang

    2017-06-01

    To improve the oxidation resistance of Ti alloys, a NiCrAlY coating was deposited as diffusion barrier between aluminum overlay coating and pure Ti substrate by air plasma spraying method. The microstructure and oxidation behavior of Al coatings with and without NiCrAlY diffusion barrier were investigated in isothermal oxidation tests at 800 °C for 100 h. The results indicate that the weight gain of the Al/NiCrAlY coating was 4.16 × 10-5 mg2 cm-4 s-1, whereas that of the single Al coating was 9.52 × 10-5 mg2 cm-4 s-1 after 100 h oxidation. As compared with single Al coating, the Al/NiCrAlY coating revealed lower oxidation rate and excellent oxidation resistance by forming thin Al2O3 + NiO scales at overlaying coating/diffusion barrier and diffusion barrier/substrate interfaces. Meanwhile, the inward diffusion of Al and the outward diffusion of Ti were inhibited effectively by the NiCrAlY diffusion barrier.

  16. Consoer et al PFOS dataset

    EPA Pesticide Factsheets

    This ScienceHub entry was developed for the published paper: Consoer et al., 2016, Toxicokinetics of perfluorooctane sulfonate in rainow trout (Oncorhynchus mykiss), Environ. Toxicol. Chem. 35:717-727. Individual rainbow trout were exposed to PFOS by bolus injection (elimination studies) or by adding PFOS to incoming water (branchial uptake studies). The trout were fitted with indwelling catheters and urinary cannulae to permit periodic collection of blood and urine. Additional sampling was conducted to evaluate PFOS uptake from and elimination to respired water. Data obtained from each fish was evaluated using a clearance-volume pharmacokinetic model. Modeled kinetic parameters were then averaged to develop summary statistics which were used as a basis for interpreting modeled results and making comparisons to a previous study of rainbow trout exposed to perfluorooctanoate (PFOA; Consoer et al., 2014, Aquat. Toxicol. 156:65-73). The results of this study, combined with that of the previous PFOA study, suggest that PFOA is a substrate for renal transporters in fish while glomerular filtration alone may be sufficient to explain the observed renal elimination of PFOS. These findings demonstrate that models developed to predict the bioaccumulation of perfluoroalkyl acids by fish must account for differences in renal clearance of individual compounds.This dataset is associated with the following publication:Consoer, D., A. Hoffman , P. Fitzsimmons , P. Kosia

  17. Phosphorus Enhances Al Resistance in Al-resistant Lespedeza bicolor but not in Al-sensitive L. cuneata Under Relatively High Al Stress

    PubMed Central

    Sun, Qing Bin; Shen, Ren Fang; Zhao, Xue Qiang; Chen, Rong Fu; Dong, Xiao Ying

    2008-01-01

    Background and Aims Aluminium (Al) toxicity and phosphorus (P) deficiency often co-exist in acidic soils and limit crop production worldwide. Lespedeza bicolor is a leguminous forage species that grows very well in infertile, acidic soils. The objective of this study was to investigate the effects of Al and P interactions on growth of Lespedeza and the distributions of Al and P in two different Al-resistant species, and to explore whether P can ameliorate the toxic effect of Al in the two species. Methods Two species, Lespedeza bicolor and L. cuneata, were grown for 30 d with alternate Al and P treatments in a hydroponics system. Harvested roots were examined using a root-system scanner, and the contents of Al, P and other nutrient elements in the plants were determined using inductively coupled plasma-atomic emission spectroscopy (ICP-AES). Haematoxylin staining was used to observe the distribution of Al in the roots of seedlings. After pre-culture with or without P application, organic acids in the exudates of roots exposed to Al were held in an anion-exchange resin, eluted with 2 m HCl and then analysed using high-performance liquid chromatography (HPLC). Key Results Lespedeza bicolor exhibited a stronger Al resistance than did L. cuneata; Al exclusion mechanisms may mainly be responsible for resistance. P application alleviated the toxic effect of Al on root growth in L. bicolor, while no obvious effects were observed in L. cuneata. Much less Al was accumulated in roots of L. bicolor than in L. cuneata after P application, and the P contents in both roots and shoots increased much more for L. bicolor than for L. cuneata. Lespedeza bicolor showed a higher P/Al ratio in roots and shoots than did L. cuneata. P application decreased the Al accumulation in root tips of L. bicolor but not in L. cuneata. The amount of Al-induced organic acid (citrate and malate) exudation from roots pre-cultured with P was much less than from roots without P application; no malate and

  18. Effects of the Al content on pore structures of porous TieAl alloys

    SciTech Connect

    Jaing, Y; He, Y H; Xu, N P; Zou, J; Huang, B; Lui, C T

    2008-01-01

    Porous TieAl alloys with different nominal compositions were fabricated through a reactive synthesis of Ti and Al elemental powders. It has been found that the pore parameters vary with the Al contents, indicating that the nature of the pores can be manipulated through changing the Al contents. In addition, detailed structural characterizations showed that the fabricated porous TieAl alloys can have three crystalline phases (i.e., a2-Ti3Al, g-TiAl, and TiAl3) when using different compositions. The fundamental reasons behind these phenomena have been explored.

  19. Cenomanian-Turonian biostratigraphy of the Jardas Al Abid area, Al Jabal Al Akhdar, northeast Libya

    NASA Astrophysics Data System (ADS)

    El Qot, Gamal M.; Abdulsamad, Esam O.

    2016-09-01

    The Upper Cenomanian-Turonian succession exposed at Jardas al'Abid area consists mainly of carbonates with siliciclastic intercalations. This succession is subdivided lithostratigraphically into: Qasr al'Abid (Late Cenomanian) and Al Baniyah (Late Cenomanian-Coniacian) formations. This sequence is relatively rich in macrofossil assemblages especially bivalves, gastropods, and echinoids with rare ammonites. Based on the first occurrence (FO) and last occurrence (LO) of some index species of these macrofossil groups, an integrated biostratigraphic framework has been constructed. The studied Cenomanian-Turonian sequence is subdivided biostratigraphically into three ammonite biozones; Pseudaspidoceras pseudonodosoides Total Range Zone, Choffaticeras segne Total Range Zone, and Coilopoceras requienianum Total Range Zone. Based on the rest of macrofossil assemblages other than the ammonites, eight biozones were recognized; Mecaster batnensis Total Range Zone, Ceratostreon flabellatum-Neithea dutrugei Acme Zone, Costagyra olisiponensis Acme Zone, Pycnodonte (Phygraea) vesicularis vesiculosa Acme Zone, Mytiloides labiatus Total Range Zone = Mecaster turonensis Acme Zone, Rachiosoma rectilineatum-Curvostrea rouvillei-Tylostoma (T.) globosum Assemblage Zone, Radiolites sp.-Apricardia? matheroni Total Range Zone, and Nerinea requieniana Total Range Zone. Most of the proposed biozones are recorded for the first time from Libya. The integration among these biozones as well as local and inter-regional correlation of the biozones have been discussed. The stage boundaries of the studied stratigraphic intervals are discussed, where the Cenomanian/Turonian boundary is delineated at the last occurrence (LO) of Pseudaspidoceras pseudonodosoides (Choffat), while the Turonian/Coniacian boundary is delineated arbitrary being agree with the LO of the Turonian fauna.

  20. Photoelectrical, photophysical and photocatalytic properties of Al based MOFs: MIL-53(Al) and MIL-53-NH2(Al)

    NASA Astrophysics Data System (ADS)

    An, Yang; Li, Huiliang; Liu, Yuanyuan; Huang, Baibiao; Sun, Qilong; Dai, Ying; Qin, Xiaoyan; Zhang, Xiaoyang

    2016-01-01

    Two Al based MOFs (MIL-53(Al) and MIL-53-NH2 (Al)) were synthesized, and their photoelectrical, photophysical and photocatalytic properties towards oxygen evolution from water were investigated. Different from the ligand to metal charge transfer process previously reported, we proposes a new photocatalytic mechanism based on electron tunneling according to the results of theoretical calculation, steady state and time resolved fluorescence spectra. The organic linkers absorb photons, giving rise to electrons and holes. Then, the photogenerated electrons tunnel through the AlO6-octahedra, which not only inhibit the recombination of photogenerated charge carriers, but also is a key factor to the photocatalytic activity of Al based MOFs.

  1. Programa de conservacion para aves migratorias neotropicales

    Treesearch

    Deborah Finch; Marcia Wilson; Roberto Roca

    1992-01-01

    Mas de 250 especies de aves terrestres migran a Norte America durante la epoca reproductiva para aprovechar los sistemas templados. No obstante, las aves migratorias neotropicales pasan la mayor parte de su ciclo de vida en los habitat tropicales y subtropicales de paises latinoamericanos y caribefios donde viven en una asociacion cercana con las aves residentes. Para...

  2. Aluminium distribution in ZSM-5 revisited: The role of Al-Al interactions

    SciTech Connect

    Ruiz-Salvador, A. Rabdel; Grau-Crespo, Ricardo; Gray, Aileen E.; Lewis, Dewi W.

    2013-02-15

    We present a theoretical study of the distribution of Al atoms in zeolite ZSM-5 with Si/Al=47, where we focus on the role of Al-Al interactions rather than on the energetics of Al/Si substitutions at individual sites. Using interatomic potential methods, we evaluate the energies of the full set of symmetrically independent configurations of Al siting in a Si{sub 94}Al{sub 2}O{sub 192} cell. The equilibrium Al distribution is determined by the interplay of two factors: the energetics of the Al/Si substitution at an individual site, which tends to populate particular T sites (e.g., the T14 site), and the Al-Al interaction, which at this Si/Al maximises Al-Al distances in general agreement with Dempsey's rule. However, it is found that the interaction energy changes approximately as the inverse of the square of the distance between the two Al atoms, rather than the inverse of the distance expected if this were merely charge repulsion. Moreover, we find that the anisotropic nature of the framework density plays an important role in determining the magnitude of the interactions, which are not simply dependent on Al-Al distances. - Graphical abstract: Role of Al-Al interactions in high silica ZSM-5 is shown to be anisotropic in nature and not dependent solely on Coulombic interactions. Highlights: Black-Right-Pointing-Pointer Si-Al distribution in ZSM-5 is revisited, stressing the role of the Al-Al interaction. Black-Right-Pointing-Pointer Coulomb interactions are not the key factors controlling the Al siting. Black-Right-Pointing-Pointer Anisotropy of the framework is identified as a source of departure from Dempsey's rule.

  3. Framework Al zoning in zeolite ECR-1.

    PubMed

    Shin, Jiho; Ahn, Nak Ho; Cho, Sung June; Ren, Limin; Xiao, Feng-Shou; Hong, Suk Bong

    2014-02-25

    Rietveld analyses of the synchrotron X-ray diffraction data for various cation forms of zeolite ECR-1 have demonstrated framework Al zoning, which parallels the alternation of Al-rich maz and Al-poor mor layers. This can be further supported by notable differences in the average bond valence of its 10 crystallographically distinct tetrahedral sites.

  4. Study of the Al/graphite interface

    NASA Astrophysics Data System (ADS)

    Lu, Hua; Shen, Dian-hong; Deng, Xin-fa; Xue, Qi-kun; Froumin, N.; Polak, M.

    2001-09-01

    Thin Al films with a thickness of 20-30nm were prepared by ultra-high vacuum deposition of Al onto a graphite surface parallel to a (0001) basal plane. The samples were annealed up to 1070K. X-ray photoelectron spectroscopy analysis has shown that for temperatures just higher than 770K, a little carbide occurs in the Al film and only an Al-C phase is present at the Al/graphite interface. After annealing at 970K, the Al4C3 phase can be observed and the binding energy of the Al2p electrons increases continuously from 72.7 to 74.2eV with increasing temperature up to 1070K. Auger electron spectroscopy depth profiles are measured to investigate the phases existing in the Al film as well as at the Al/graphite interface. It is found that the Al4C3 phase at the interface is the final product of a series of Al carbides from the interfacial reaction between Al and graphite.

  5. Nonstoichiometry of Al-Zr intermetallic phases

    SciTech Connect

    Radmilovic, V.; Thomas, G.

    1994-06-01

    Nonstoichiometry of metastable cubic {beta}{prime} and equilibrium tetragonal {beta} Al-Zr intermetallic phases of the nominal composition Al{sub 3}Zr in Al-rich alloys has been extensively studied. It is proposed that the ``dark contrast`` of {beta}{prime} core in {beta}{prime}/{sigma}{prime} complex precipitates, in Al-Li-Zr based alloys, is caused by incorporation of Al and Li atoms into the {beta}{prime} phase on Zr sublattice sites, forming nonstoichiometric Al-Zr intermetallic phases, rather than by Li partitioning only. {beta}{prime} particles contain very small amounts of Zr, approximately 5 at.%, much less than the stoichiometric 25 at.% in the Al{sub 3}Zr metastable phase. These particles are, according to simulation of high resolution images, of the Al{sub 3}(Al{sub 0.4}Li{sub 0.4}Zr{sub 0.2}) type. Nonstoichiometric particles of average composition Al{sub 4}Zr and Al{sub 6}Zr are observed also in the binary Al-Zr alloy, even after annealing for several hours at 600{degree}C.

  6. Nuevos sistemas de frecuencia intermedia para el IAR

    NASA Astrophysics Data System (ADS)

    Olalde, J. C.; Perilli, D.; Larrarte, J. J.

    Se presenta el diagrama en bloques de los nuevos sistemas de Frecuencia Intermedia para los dos radiómetros instalados en el IAR. Entre las características más importantes del sistema podemos mencionar la posibilidad de conectar cualquiera de las dos antenas a los ``backend" disponibles: analizador espectral de alta resolución (META II) de 0,05 Hz, autocorrelador de 1008 canales y contínuo. Se incorporan al sistema nuevos sintetizadores de frecuencia implementados con PLL y la moderna técnica de síntesis digital directa. Por último, el conjunto del sistema es susceptible de ser configurado por las computadoras de adquisición de datos, supervisadas por otra, que entrega el estado de funcionamiento actual y evita la selección de configuraciones incorrectas por parte del usuario.

  7. Spontaneous Emission Between - and Para-Levels of Water-Ion H_2O^+

    NASA Astrophysics Data System (ADS)

    Tanaka, Keiichi; Harada, Kensuke; Nanbu, Shinkoh; Oka, Takeshi

    2012-06-01

    Nuclear spin conversion interaction of water ion, H_2O^+, has been studied to derive spontaneous emission lifetime between ortho- and para-levels. H_2O^+ is a radical ion with the ^2B_1 electronic ground state. Its off-diagonal electron spin-nuclear spin interaction term, Tab(S_aΔ I_b + S_bΔ I_a), connects para and ortho levels, because Δ I = I_1 - I_2 has nonvanishing matrix elements between I = 0 and 1. The mixing by this term with Tab = 72 MHz predicted by ab initio theory in the MRD-CI/Bk level, is many orders of magnitude larger than for closed shell molecules because of the large magnetic interaction due to the un-paired electron. Using the molecular constants reported by Mürtz et al. by FIR-LMR, we searched for ortho and para coupling channels below 1000 cm-1 with accidental near degeneracy between para and ortho levels. For example, hyperfine components of the 42,2(ortho) and 33,0(para) levels mix by 1.2 × 10-3 due to their near degeneracy (Δ E = 0.417 cm-1), and give the ortho-para spontaneous emission lifetime of about 0.63 year. The most significant low lying 10,1(para) and 11,1(ortho) levels, on the contrary, mix only by 8.7 × 10-5 because of their large separation (Δ E = 16.267 cm-1) and give the spontaneous emission lifetime from 10,1(para) to 00,0(ortho) of about 100 year.These results qualitatively help to understand the observed high ortho- to para- H_2O^+ ratio of 4.8 ± 0.5 toward Sgr B2 but they are too slow to compete with the conversion by collision unless the number density of the region is very low (n ˜1 cm-3) or radiative temperature is very high (T_r > 100 K). M. Staikova, B. Engels, M. Peric, and S.D. Peyerimhoff, Mol. Phys. 80, 1485 (1993) P. Mürtz, L.R. Zink, K.M. Evenson, and J.M. Brown J. Chem. Phys. 109, 9744 (1998). LP. Schilke, et al., A&A 521, L11 (2010).

  8. Opportunity's 'Rub al Khali' Panorama

    NASA Technical Reports Server (NTRS)

    2005-01-01

    [figure removed for brevity, see original site] Click on the image for Opportunity's 'Rub al Khali' Panorama (QTVR)

    This panoramic image, dubbed 'Rub al Khali,' was acquired by NASA's Mars Exploration Rover Opportunity on the plains of Meridiani during the period from the rover's 456th to 464th sols on Mars (May 6 to May 14, 2005). Opportunity was about 2 kilometers (1.2 miles) south of 'Endurance Crater' at a place known informally as 'Purgatory Dune.'

    The rover was stuck in the dune's deep fine sand for more than a month. 'Rub al Khali' (Arabic translation: 'the empty quarter') was chosen as the name for this panorama because it is the name of a similarly barren, desolate part of the Saudi Arabian desert on Earth.

    The view spans 360 degrees. It consists of images obtained in 97 individual pointings of the panoramic camera. The camera took images with five camera filters at each pointing. This 22,780-by-6,000-pixel mosaic is an approximately true-color rendering generated using the images acquired through filters admitting light wavelengths of 750, 530, and 480 nanometers.

    Lighting varied during the nine sols it took to acquire this panorama, resulting in some small image seams within the mosaic. These seams have been smoothed in sky parts of the mosaic to better simulate the vista that a person would see if able to view it all at the same time on Mars.

    Opportunity's tracks leading back to the north (center of the panorama) are a reminder of the rover's long trek from Endurance Crater. The deep ruts dug by Opportunity's wheels as it became stuck in the sand appear in the foreground. The crest and trough of the last ripple the rover crossed before getting stuck is visible in the center. These wind-formed sand features are only about 10 to 15 centimeters (4 to 6 inches) tall. The crest of the actual ripple where the rover got stuck can be seen just to the right of center. The tracks and a few other places on and near ripple crests can

  9. Cyclic oxidation resistance of a reaction milled NiAl-AlN composite

    NASA Technical Reports Server (NTRS)

    Lowell, Carl E.; Barrett, Charles A.; Whittenberger, J. D.

    1990-01-01

    Based upon recent mechanical property tests a NiAl-AlN composite produced by cryomilling has very attractive high temperature strength. This paper focuses on the oxidation resistance of the NiAl-AlN composite at 1473 and 1573 K as compared to that of Ni-47Al-0.15Zr, one of the most oxidation resistant intermetallics. The results of cyclic oxidation tests show that the NiAl-AlN composite has excellent properties although not quite as good as those of Ni-47Al-0.15Zr. The onset of failure of the NiAl-AlN was unique in that it was not accompanied by a change in scale composition from alumina to less protective oxides. Failure in the composite appears to be related to the entrapment of AlN particles within the alumina scale.

  10. Wear behavior of Al-Al{sub 3}Ti composite manufactured by a centrifugal method

    SciTech Connect

    Watanabe, Yoshimi; Yamanaka, Noboru; Fukui, Yasuyoshi

    1999-12-01

    The purpose of the present study was to develop a wear-resistant, light Al-Al{sub 3}Ti composite material. An Al-Al{sub 3}Ti composite specimen was machined from a thick-walled tube of Al-Al{sub 3}Ti functionally graded material (FGM) manufactured by the centrifugal method from a commercial ingot of Al-5 mass% Ti master alloy. The alloy was heated to a temperature where solid Al{sub 3}Ti particles resided in a liquid Al matrix, and then the centrifugal method was carried out. Al{sub 3}Ti particles in a commercial alloy ingot exist as platelets, and this shape was maintained through the casting. Three kinds of wear specimens were prepared, taking into account the morphology of the Al{sub 3}Ti particles in the thick-walled FGM tube; the Al{sub 3}Ti particles were arranged with their platelet planes nearly normal to the radial direction as a result of the applied centrifugal force. The wear resistance of the Al-Al{sub 3}Ti composite was significantly higher than that of pure Al. Wear-resistance anisotropy and dissolution of the Al{sub 3}Ti into the Al matrix at the near-surface region, around 100 {micro}m in depth, were also observed. The mechanism of the supersaturated-layer formation and the origin of the anisotropic wear resistance are discussed.

  11. Systems Engineering Techniques for ALS Decision Making

    NASA Technical Reports Server (NTRS)

    Rodriquez, Luis F.; Drysdale, Alan E.; Jones, Harry; Levri, Julie A.

    2004-01-01

    The Advanced Life Support (ALS) Metric is the predominant tool for predicting the cost of ALS systems. Metric goals for the ALS Program are daunting, requiring a threefold increase in the ALS Metric by 2010. Confounding the problem, the rate new ALS technologies reach the maturity required for consideration in the ALS Metric and the rate at which new configurations are developed is slow, limiting the search space and potentially giving the perspective of a ALS technology, the ALS Metric may remain elusive. This paper is a sequel to a paper published in the proceedings of the 2003 ICES conference entitled, "Managing to the metric: an approach to optimizing life support costs." The conclusions of that paper state that the largest contributors to the ALS Metric should be targeted by ALS researchers and management for maximum metric reductions. Certainly, these areas potentially offer large potential benefits to future ALS missions; however, the ALS Metric is not the only decision-making tool available to the community. To facilitate decision-making within the ALS community a combination of metrics should be utilized, such as the Equivalent System Mass (ESM)-based ALS metric, but also those available through techniques such as life cycle costing and faithful consideration of the sensitivity of the assumed models and data. Often a lack of data is cited as the reason why these techniques are not considered for utilization. An existing database development effort within the ALS community, known as OPIS, may provide the opportunity to collect the necessary information to enable the proposed systems analyses. A review of these additional analysis techniques is provided, focusing on the data necessary to enable these. The discussion is concluded by proposing how the data may be utilized by analysts in the future.

  12. Instandhaltungsmanagement als Gestaltungsfeld Ganzheitlicher Produktionssysteme

    NASA Astrophysics Data System (ADS)

    Dombrowski, Uwe; Schulze, Sven; Otano, Isabel Crespo

    Sich kontinuierlich verändernde Rahmenbedingungen, wie beispielsweise eine steigende Variantenvielfalt, verkürzte Produktlebenszyklen sowie Kundenforderungen nach höherer Qualität, kürzeren Lieferzeiten und geringeren Kosten, fordern von produzierenden Unternehmen eine stetige Anpassung der Prozesse, der Organisation und der Strukturen. Seit den 90er Jahren versuchen immer mehr deutsche Unternehmen diesen veränderten Anforderungen mit der Einführung eines Ganzheitlichen Produktionssystems (GPS) zu begegnen. Ganzheitliche Produktionssysteme sind dabei in ihren Grundlagen an das Toyota Produktionssystem angelehnt, vereinigen aber auch weitere Methoden zu einem unternehmensspezifischen Regelwerk. Im Rahmen des langfristigen Trends zu unternehmensindividuellen Produktionssystemen wird sowohl in der Industrie als auch in der Forschung intensiv über das Toyota Produktionssystem, Lean Production, Lean Management und Ganzheitliche Produktionssysteme diskutiert, werden Konzepte zu Implementierung und Betrieb erstellt und die Wirtschaftlichkeit untersucht.

  13. The formaldehyde ortho/para ratio as a probe of dark cloud chemistry and evolution

    NASA Technical Reports Server (NTRS)

    Dickens, J. E.; Irvine, W. M.

    1999-01-01

    We present measurements of the H2CO ortho/para ratio toward four star-forming cores, L723, L1228, L1527, and L43, and one quiescent core, L1498. Combining these data with earlier results by Minh et al., three quiescent cores are found to have ortho/para ratios near 3, the ratio of statistical weights expected for gas-phase formation processes. In contrast, ortho/para ratios are 1.5-2.1 in five star-forming cores, suggesting thermalization at a kinetic temperature of 10 K. We attribute modification of the ortho/para ratio in the latter cores to formation and/or equilibration of H2CO on grains with sub-sequent release back into the gas phase due to the increased energy inputs from the forming star and outflow. We see accompanying enhancements in the H2CO abundance relative to H, to support this idea. The results suggest that the formaldehyde ortho/para ratio can differentiate between quiescent cores and those in which low-mass star formation has occurred.

  14. The formaldehyde ortho/para ratio as a probe of dark cloud chemistry and evolution

    NASA Technical Reports Server (NTRS)

    Dickens, J. E.; Irvine, W. M.

    1999-01-01

    We present measurements of the H2CO ortho/para ratio toward four star-forming cores, L723, L1228, L1527, and L43, and one quiescent core, L1498. Combining these data with earlier results by Minh et al., three quiescent cores are found to have ortho/para ratios near 3, the ratio of statistical weights expected for gas-phase formation processes. In contrast, ortho/para ratios are 1.5-2.1 in five star-forming cores, suggesting thermalization at a kinetic temperature of 10 K. We attribute modification of the ortho/para ratio in the latter cores to formation and/or equilibration of H2CO on grains with sub-sequent release back into the gas phase due to the increased energy inputs from the forming star and outflow. We see accompanying enhancements in the H2CO abundance relative to H, to support this idea. The results suggest that the formaldehyde ortho/para ratio can differentiate between quiescent cores and those in which low-mass star formation has occurred.

  15. Magnetism of Al-substituted magnetite reduced from Al-hematite

    NASA Astrophysics Data System (ADS)

    Jiang, Zhaoxia; Liu, Qingsong; Zhao, Xiang; Roberts, Andrew P.; Heslop, David; Barrón, Vidal; Torrent, José

    2016-06-01

    Aluminum-substituted magnetite (Al-magnetite) reduced from Al-substituted hematite or goethite (Al-hematite or Al-goethite) is an environmentally important constituent of magnetically enhanced soils. In order to characterize the magnetic properties of Al-magnetite, two series of Al-magnetite samples were synthesized through reduction of Al-hematite by a mixed gas (80% CO2 and 20% CO) at 395°C for 72 h in a quartz tube furnace. Al-magnetite samples inherited the morphology of their parent Al-hematite samples, but only those transformed from Al-hematite synthesized at low temperature possessed surficial micropores, which originated from the release of structural water during heating. Surface micropores could thus serve as a practical fingerprint of fire or other high-temperature mineralogical alteration processes in natural environments, e.g., shear friction in seismic zones. In addition, Al substitution greatly affects the magnetic properties of Al-magnetite. For example, coercivity (Bc) increases with increasing Al content and then decreases slightly, while the saturation magnetization (Ms), Curie temperature (Tc), and Verwey transition temperature (Tv) all decrease with increasing Al content due to crystal defect formation and dilution of magnetic ions caused by Al incorporation. Moreover, different trends in the correlation between Tc and Bc can be used to discriminate titanomagnetite from Al-magnetite, which is likely to be important in environmental and paleomagnetic studies, particularly in soil.

  16. Diseño y Operación de un Secador Solar de Madera para Países Tropicales

    Treesearch

    Brian Bond; Omar Espinoza; Philip Araman

    2011-01-01

    La madera es usualmente secada a un contenido de humedad específico antes de ser transformada en productos finales. A pesar de que la madera puede ser secada al aire, la humedad ambiental en la mayoría de las ubicaciones previene a la madera alcanzar el contenido de humedad necesario para su estabilidad dimensional y adecuado procesamiento, especialmente para usos de...

  17. Functional Expression of Drosophila para Sodium Channels

    PubMed Central

    Warmke, Jeffrey W.; Reenan, Robert A.G.; Wang, Peiyi; Qian, Su; Arena, Joseph P.; Wang, Jixin; Wunderler, Denise; Liu, Ken; Kaczorowski, Gregory J.; Ploeg, Lex H.T. Van der; Ganetzky, Barry; Cohen, Charles J.

    1997-01-01

    The Drosophila para sodium channel α subunit was expressed in Xenopus oocytes alone and in combination with tipE, a putative Drosophila sodium channel accessory subunit. Coexpression of tipE with para results in elevated levels of sodium currents and accelerated current decay. Para/TipE sodium channels have biophysical and pharmacological properties similar to those of native channels. However, the pharmacology of these channels differs from that of vertebrate sodium channels: (a) toxin II from Anemonia sulcata, which slows inactivation, binds to Para and some mammalian sodium channels with similar affinity (Kd ≅ 10 nM), but this toxin causes a 100-fold greater decrease in the rate of inactivation of Para/TipE than of mammalian channels; (b) Para sodium channels are >10-fold more sensitive to block by tetrodotoxin; and (c) modification by the pyrethroid insecticide permethrin is >100-fold more potent for Para than for rat brain type IIA sodium channels. Our results suggest that the selective toxicity of pyrethroid insecticides is due at least in part to the greater affinity of pyrethroids for insect sodium channels than for mammalian sodium channels. PMID:9236205

  18. How to reduce the Al-texture in AlN films during film preparation

    NASA Astrophysics Data System (ADS)

    Yin, Ju-qian; Chen, Xi-ming; Yang, Bao-he; Zhang, Qian; Wu, Xiao-guo

    2012-09-01

    The preparation of aluminum nitrogen (AlN) film without Al texture is of great significance for the manufacture of high-performance surface acoustic wave (SAW) device. We research the process factors which bring Al into AlN film due to radio frequency (RF) magnetron sputtering system, and discuss how the process parameters influence the AlN thin film containing Al. In the research, it is found that the high sputtering power, the low deposition pressures and low partial pressure of Ar can lead to growing Al-texture during AlN thin film preparation, and the experiment also shows that filling the chamber with nitrogen gas can recrystallize a small amount of Al composition into AlN film during the annealing process in the high temperature environment.

  19. Atom probe analysis of AlN interlayers in AlGaN/AlN/GaN heterostructures

    SciTech Connect

    Mazumder, Baishakhi; Kaun, Stephen W.; Speck, James S.; Lu, Jing; Keller, Stacia; Mishra, Umesh K.

    2013-03-18

    Atom probe tomography was used to characterize AlN interlayers in AlGaN/AlN/GaN heterostructures grown by plasma-assisted molecular beam epitaxy (PAMBE), NH{sub 3}-based molecular beam epitaxy (NH{sub 3}-MBE), and metal-organic chemical vapor deposition (MOCVD). The PAMBE-grown AlN interlayer had the highest purity, with nearly 100% of group-III sites occupied by Al. The group-III site concentrations of Al for interlayers grown by NH{sub 3}-MBE and MOCVD were {approx}85% and {approx}47%, respectively. Hall measurements were performed to determine the two-dimensional electron gas mobility and sheet concentration. Sheet concentrations were {approx}25%-45% higher with molecular beam epitaxy than with MOCVD, and these results matched well with atom probe data.

  20. A comparison of mechanical properties between Al and Al3Mg

    NASA Astrophysics Data System (ADS)

    Yang, Rong; Tang, Bin; Gao, Tao

    2016-11-01

    On the basis of first principles calculations, we have calculated the elastic properties, stress-strain relations, ideal tensile strengths, ideal shear strengths, and the ideal compressed strengths of Al and Al3Mg. The stress-strain relations of Al3Mg are strikingly similar to those of Al, indicating that the crystal structure appears to be more important than the identity of the individual atoms during uniaxial deformation. Al3Mg is found to have larger moduli and higher strengths than Al but less ductile than Al. So Al3Mg is expected to be a harder material, consistent with its exploitation in Al precipitate-hardening mechanisms. The calculated elastic properties, tensile strengths and shear strengths of Al are consistent with experimental values or previous theoretical results. We also use another method (molecular dynamics (MD) simulations) to recalculate elastic constants, ideal tensile and compressed strength of Al3Mg for checking and comparing. We find that the results obtained by the two methods agree well with each other. The failure modes under uniaxial <100> tension are also explored for Al and Al3Mg. Our calculations confirm that Al fail by shear and predict that Al3Mg also fail by shear.

  1. Ti{sub 2}AlN thin films synthesized by annealing of (Ti+Al)/AlN multilayers

    SciTech Connect

    Cabioch, Thierry; Alkazaz, Malaz; Beaufort, Marie-France; Nicolai, Julien; Eyidi, Dominique; Eklund, Per

    2016-08-15

    Highlights: • Epitaxial thin films of the MAX phase Ti{sub 2}AlN are obtained by thermal annealing. • A new metastable (Ti,Al,N) solid solution with the structure of α-T is evidenced. • The formation of the MAX phase occurs at low temperature (600 °C). - Abstract: Single-phase Ti{sub 2}AlN thin films were obtained by annealing in vacuum of (Ti + Al)/AlN multilayers deposited at room temperature by magnetron sputtering onto single-crystalline (0001) 4H-SiC and (0001) Al{sub 2}O{sub 3} substrates. In-situ X-ray diffraction experiments combined with ex-situ cross-sectional transmission electron microscopy observations reveal that interdiffusion processes occur in the multilayer at a temperature of ∼400 °C leading to the formation of a (Ti, Al, N) solid solution, having the hexagonal structure of α-Ti, whereas the formation of Ti{sub 2}AlN occurs at 550–600 °C. Highly oriented (0002) Ti{sub 2}AlN thin films can be obtained after an annealing at 750 °C.

  2. Reply to Vance et al.

    SciTech Connect

    Woon-Chee Yee; Elliott, J.L; Kwon, J.M.; Goodfellow, P.

    1996-07-01

    In our report of a family with a motor and sensory polyneuropathy that was linked to chromosome 3q, we classified this neuropathy as a form of hereditary motor and sensory neuropathy II (HMSN II, also known as {open_quotes}CMT2{close_quotes}). Doubts have been raised by Vance et al. as to whether this neuropathy should be classified as hereditary sensory autonomic neuropathy I (HSAN I) instead of HMSN II. While it is reasonable to raise such doubts, we believe that the neuropathy is best designated as HMSN II for the reasons described below. The group of disorders described as HSAN are characterized by primary or predominant involvement of sensory and autonomic neurons that fail to develop or that undergo atrophy and degeneration. These disorders were extensively reviewed by Dyck and Ohta, who initially described them as the hereditary sensory neuropathies (HSN). It was Dyck who subsequently suggested that these disorders be designated HSAN rather than HSN, because of the presence of autonomic involvement. 8 refs.

  3. Response to Durif et al.

    PubMed

    Putman, Nathan F; Naisbett-Jones, Lewis C; Stephenson, Jessica F; Ladak, Sam; Young, Kyle A

    2017-09-25

    Our recent study [1] in Current Biology used a magnetic displacement experiment and simulations in an ocean circulation model to provide evidence that young European eels possess a 'magnetic map' that can aid their marine migration. Our results support two major conclusions: first, young eels distinguish among magnetic fields corresponding to locations across their marine range; second, for the fields that elicited significantly non-random orientation, swimming in the experimentally observed direction from the corresponding locations would increase entrainment in the Gulf Stream system. In their critique, Durif et al.[2] seem to conflate the separate and potentially independent 'map step' and 'compass step' of animal navigation. In the map step, an animal derives positional information to select a direction, whereas in the compass step the animal maintains that heading [3,4]. Our experiment was designed such that differences in eel orientation among treatments would indicate an ability to use the magnetic field as a map; the compass cue(s) used by eels was not investigated. Copyright © 2017 Elsevier Ltd. All rights reserved.

  4. Seltzer_et_al_2016

    EPA Pesticide Factsheets

    This dataset supports the modeling study of Seltzer et al. (2016) published in Atmospheric Environment. In this study, techniques typically used for future air quality projections are applied to a historical 11-year period to assess the performance of the modeling system when the driving meteorological conditions are obtained using dynamical downscaling of coarse-scale fields without correcting toward higher resolution observations. The Weather Research and Forecasting model and the Community Multiscale Air Quality model are used to simulate regional climate and air quality over the contiguous United States for 2000-2010. The air quality simulations for that historical period are then compared to observations from four national networks. Comparisons are drawn between defined performance metrics and other published modeling results for predicted ozone, fine particulate matter, and speciated fine particulate matter. The results indicate that the historical air quality simulations driven by dynamically downscaled meteorology are typically within defined modeling performance benchmarks and are consistent with results from other published modeling studies using finer-resolution meteorology. This indicates that the regional climate and air quality modeling framework utilized here does not introduce substantial bias, which provides confidence in the method??s use for future air quality projections.This dataset is associated with the following publication:Seltzer, K., C

  5. Using ParaPost Tenax fiberglass and ParaCore build-up material to restore severely damaged teeth.

    PubMed

    Caicedo, Ricardo; Castellon, Paulino

    2005-01-01

    This article describes a technique using ParaPost Tenax Fiber White, ParaPost Cement, and ParaPost ParaCore build-up material to restore a tooth with a significant loss of tooth structure. After successful root canal therapy, the posts were bonded in the canals and the core was built using ParaPost ParaCore build-up material. At that point, the tooth was prepared to receive a conventional porcelain-fused-to-metal crown.

  6. Ancient origins of axial patterning genes: Hox genes and ParaHox genes in the Cnidaria.

    PubMed

    Finnerty, J R; Martindale, M Q

    1999-01-01

    Among the bilaterally symmetrical, triploblastic animals (the Bilateria), a conserved set of developmental regulatory genes are known to function in patterning the anterior-posterior (AP) axis. This set includes the well-studied Hox cluster genes, and the recently described genes of the ParaHox cluster, which is believed to be the evolutionary sister of the Hox cluster (Brooke et al. 1998). The conserved role of these axial patterning genes in animals as diverse as frogs and flies is believed to reflect an underlying homology (i.e., all bilaterians derive from a common ancestor which possessed an AP axis and the developmental mechanisms responsible for patterning the axis). However, the origin and early evolution of Hox genes and ParaHox genes remain obscure. Repeated attempts have been made to reconstruct the early evolution of Hox genes by analyzing data from the triphoblastic animals, the Bilateria (Schubert et al. 1993; Zhang and Nei 1996). A more precise dating of Hox origins has been elusive due to a lack of sufficient information from outgroup taxa such as the phylum Cnidaria (corals, hydras, jellyfishes, and sea anemones). In combination with outgroup taxa, another potential source of information about Hox origins is outgroup genes (e.g., the genes of the ParaHox cluster). In this article, we present cDNA sequences of two Hox-like genes (anthox2 and anthox6) from the sea anemone, Nematostella vectensis. Phylogenetic analysis indicates that anthox2 (= Cnox2) is homologous to the GSX class of ParaHox genes, and anthox6 is homologous to the anterior class of Hox genes. Therefore, the origin of Hox genes and ParaHox genes occurred prior to the evolutionary split between the Cnidaria and the Bilateria and predated the evolution of the anterior-posterior axis of bilaterian animals. Our analysis also suggests that the central Hox class was invented in the bilaterian lineage, subsequent to their split from the Cnidaria.

  7. Growth and stress-induced transformation of zinc blende AlN layers in Al-AlN-TiN multilayers

    SciTech Connect

    Li, Nan; Yadav, Satyesh K.; Wang, Jian; Liu, Xiang -Yang; Misra, Amit

    2015-12-18

    We report that AlN nanolayers in sputter deposited {111}Al/AlN/TiN multilayers exhibit the metastable zinc-blende-structure (z-AlN). Based on density function theory calculations, the growth of the z-AlN is ascribed to the kinetically and energetically favored nitridation of the deposited aluminium layer. In situ nanoindentation of the as-deposited {111}Al/AlN/TiN multilayers in a high-resolution transmission electron microscope revealed the z-AlN to wurzite AlN phase transformation through collective glide of Shockley partial dislocations on every two {111} planes of the z-AlN.

  8. Growth and Stress-induced Transformation of Zinc blende AlN Layers in Al-AlN-TiN Multilayers

    PubMed Central

    Li, Nan; Yadav, Satyesh K.; Wang, Jian; Liu, Xiang-Yang; Misra, Amit

    2015-01-01

    AlN nanolayers in sputter deposited {111}Al/AlN/TiN multilayers exhibit the metastable zinc-blende-structure (z-AlN). Based on density function theory calculations, the growth of the z-AlN is ascribed to the kinetically and energetically favored nitridation of the deposited aluminium layer. In situ nanoindentation of the as-deposited {111}Al/AlN/TiN multilayers in a high-resolution transmission electron microscope revealed the z-AlN to wurzite AlN phase transformation through collective glide of Shockley partial dislocations on every two {111} planes of the z-AlN. PMID:26681109

  9. Growth and stress-induced transformation of zinc blende AlN layers in Al-AlN-TiN multilayers

    DOE PAGES

    Li, Nan; Yadav, Satyesh K.; Wang, Jian; ...

    2015-12-18

    We report that AlN nanolayers in sputter deposited {111}Al/AlN/TiN multilayers exhibit the metastable zinc-blende-structure (z-AlN). Based on density function theory calculations, the growth of the z-AlN is ascribed to the kinetically and energetically favored nitridation of the deposited aluminium layer. In situ nanoindentation of the as-deposited {111}Al/AlN/TiN multilayers in a high-resolution transmission electron microscope revealed the z-AlN to wurzite AlN phase transformation through collective glide of Shockley partial dislocations on every two {111} planes of the z-AlN.

  10. Protein Aggregation Inhibitors for ALS Therapy

    DTIC Science & Technology

    2013-07-01

    C. P. Multiple antioxidants in the prevention and treatment of Alzheimer disease: analysis of biologic rationale. Clin. Neuropharmacol. 2000, 23, 2...E.; Pfeiffer, E.; Jin, S.; Gamst, A.; Grundman, M.; Thomas, R.; Thal, L. J. Estrogen replacement therapy for treatment of mild to moderate Alzheimer ...general, exhibit a significant increased risk of developing ALS. There is no effective treatment for ALS; riluzole, the only FDA-approved drug for ALS

  11. Calcineurin hydrolysis of para-nitrophenyl phosphorothioate.

    PubMed

    Spannaus-Martin, Donna J; Martin, Bruce L

    2004-04-01

    para-Nitrophenyl phosphorothioate (pNPT) was hydrolyzed by calcineurin at initial rates slightly, but comparable to rates for para-nitrophenyl phosphate (pNPP). Kinetic characterization yielded higher estimates for both Km and Vmax compared to pNPP. Metal ion activation of phosphorothioate hydrolysis was more promiscuous. Unlike the hydrolysis of with pNPP, Ca2+, Mg2+, and Ba2+ activated calcineurin as well as Mn2+.

  12. The para-HK/QK correspondence

    NASA Astrophysics Data System (ADS)

    Dyckmanns, Malte; Vaughan, Owen

    2017-06-01

    We generalise the hyper-Kähler/quaternionic Kähler (HK/QK) correspondence to include para-geometries, and present a new concise proof that the target manifold of the HK/QK correspondence is quaternionic Kähler. As an application, we construct one-parameter deformations of the temporal and Euclidean supergravity c-map metrics and show that they are para-quaternionic Kähler.

  13. Orientation relationship of eutectoid FeAl and FeAl2

    PubMed Central

    Scherf, A.; Kauffmann, A.; Kauffmann-Weiss, S.; Scherer, T.; Li, X.; Stein, F.; Heilmaier, M.

    2016-01-01

    Fe–Al alloys in the aluminium range of 55–65 at.% exhibit a lamellar microstructure of B2-ordered FeAl and triclinic FeAl2, which is caused by a eutectoid decomposition of the high-temperature Fe5Al8 phase, the so-called ∊ phase. The orientation relationship of FeAl and FeAl2 has previously been studied by Bastin et al. [J. Cryst. Growth (1978 ▸), 43, 745] and Hirata et al. [Philos. Mag. Lett. (2008 ▸), 88, 491]. Since both results are based on different crystallographic data regarding FeAl2, the data are re-evaluated with respect to a recent re-determination of the FeAl2 phase provided by Chumak et al. [Acta Cryst. (2010 ▸), C66, i87]. It is found that both orientation relationships match subsequent to a rotation operation of 180° about a 〈112〉 crystallographic axis of FeAl or by applying the inversion symmetry of the FeAl2 crystal structure as suggested by the Chumak data set. Experimental evidence for the validity of the previously determined orientation relationships was found in as-cast fully lamellar material (random texture) as well as directionally solidified material (∼〈110〉FeAl || solidification direction) by means of orientation imaging microscopy and global texture measurements. In addition, a preferential interface between FeAl and FeAl2 was identified by means of trace analyses using cross sectioning with a focused ion beam. On the basis of these habit planes the orientation relationship between the two phases can be described by (01)FeAl || (114) and [111]FeAl || [10]. There is no evidence for twinning within FeAl lamellae or alternating orientations of FeAl lamellae. Based on the determined orientation and interface data, an atomistic model of the structure relationship of Fe5Al8, FeAl and FeAl2 in the vicinity of the eutectoid decomposition is derived. This model is analysed with respect to the strain which has to be accommodated at the interface of FeAl and FeAl2. PMID:27047304

  14. Tensile Behavior of Al2o3/feal + B and Al2o3/fecraly Composites

    NASA Technical Reports Server (NTRS)

    Draper, S. L.; Eldridge, J. I.; Aiken, B. J. M.

    1995-01-01

    The feasibility of Al2O3/FeAl + B and Al2O3/FeCrAlY composites for high-temperature applications was assessed. The major emphasis was on tensile behavior of both the monolithics and composites from 298 to 1100 K. However, the study also included determining the chemical compatibility of the composites, measuring the interfacial shear strengths, and investigating the effect of processing on the strength of the single-crystal Al2O3 fibers. The interfacial shear strengths were low for Al203/FeAl + B and moderate to high for Al203/FeCrAlY. The difference in interfacial bond strengths between the two systems affected the tensile behavior of the composites. The strength of the Al203 fiber was significantly degraded after composite processing for both composite systems and resulted in poor composite tensile properties. The ultimate tensile strength (UTS) values of the composites could generally be predicted with either rule of mixtures (ROM) calculations or existing models when using the strength of the etched-out fiber. The Al2O3/FeAl + B composite system was determined to be unfeasible due to poor interfacial shear strengths and a large mismatch in coefficient of thermal expansion (CTE). Development of the Al2O3/FeCrAlY system would require an effective diffusion barrier to minimize the fiber strength degradation during processing and elevated temperature service.

  15. Internal Detoxification Mechanism of Al in Hydrangea (Identification of Al Form in the Leaves).

    PubMed Central

    Ma, J. F.; Hiradate, S.; Nomoto, K.; Iwashita, T.; Matsumoto, H.

    1997-01-01

    An internal detoxification mechanism for Al was investigated in an Al-accumulating plant, hydrangea (Hydrangea macrophylla), focusing on Al forms present in the cells. The leaves of hydrangea contained as much as 15.7 mmol Al kg-1 fresh weight, and more than two-thirds of the Al was found in the cell sap. Using 27Al- nuclear magnetic resonance, the dominant peak of Al was observed at a chemical shift of 11 to 12 parts per million in both intact leaves and the extracted cell sap, which is in good accordance with the chemical shift for the 1:1 Al-citrate complex. Purification of cell sap by molecular sieve chromatography (Sephadex G-10) combined with ion-exclusion chromatography indicated that Al in fractions with the same retention time as citric acid contributed to the observed 27Al peak in the intact leaves. The molar ratio of Al to citric acid in the crude and purified cell sap approximated 1. The structure of the ligand chelated with Al was identified to be citric acid. Bioassay experiments showed that the purified Al complex from the cell sap did not inhibit root elongation of corn (Zea mays L.) and the viability of cells on the root tip surface was also not affected. These observations indicate that Al is bound to citric acid in the cells of hydrangea leaves. PMID:12223659

  16. First-principles study of the Al(001)-Al3Nb(001) interfacial properties

    NASA Astrophysics Data System (ADS)

    Ding, Yanhong; Xu, Rui

    2017-03-01

    The adhesion, interfacial energy and bonding on fcc-Al(001)/D022-Al3Nb(001) interface were investigated using density functional calculations. Considering different terminations of Al3Nb(001) (Al+Nb-terminated and Al-terminated) and stacking sites (top-, bridge- and center-sites), six Al(001)/Al3Nb(001) models were calculated. For the models with same stacking site, Al+Nb-terminated model has larger work of adhesion (Wad) than the Al-terminated one. For the models with same termination, the work of adhesion increases, and the interface energy decreases as the order of center-sited, bridge-sited and top-sited. Al+Nb-terminated-center-sited and Al-terminated-center-sited models are more stable among six models. The interfacial bonding was discussed with analysis of valence electron density distribution and partial density of states (PDOS). The bonding is mainly contributed from Al-Nb covalent bonds and Al-Al metallic interactions.

  17. Reactivity of aluminum cluster anions with ammonia: selective etching of Al11(-) and Al12(-).

    PubMed

    Grubisic, Andrej; Li, Xiang; Gantefoer, Gerd; Bowen, Kit H; Schnöckel, Hansgeorg; Tenorio, Francisco J; Martinez, Ana

    2009-11-14

    Reactivity of aluminum cluster anions toward ammonia was studied via mass spectrometry. Highly selective etching of Al(11)(-) and Al(12)(-) was observed at low concentrations of ammonia. However, at sufficiently high concentrations of ammonia, all other sizes of aluminum cluster anions, except for Al(13)(-), were also observed to deplete. The disappearance of Al(11)(-) and Al(12)(-) was accompanied by concurrent production of Al(11)NH(3)(-) and Al(12)NH(3)(-) species, respectively. Theoretical simulations of the photoelectron spectrum of Al(11)NH(3)(-) showed conclusively that its ammonia moiety is chemisorbed without dissociation, although in the case of Al(12)NH(3)(-), dissociation of the ammonia moiety could not be excluded. Moreover, since differences in calculated Al(n)(-) + NH(3) (n=9-12) reaction energies were not able to explain the observed selective etching of Al(11)(-) and Al(12)(-), we concluded that thermodynamics plays only a minor role in determining the observed reactivity pattern, and that kinetics is the more influential factor. In particular, the conversion from the physisorbed Al(n)(-)(NH(3)) to chemisorbed Al(n)NH(3)(-) species is proposed as the likely rate-limiting step.

  18. Response to Signorovitch et al.

    PubMed

    Flot, Jean-François; Debortoli, Nicolas; Hallet, Bernard; Van Doninck, Karine

    2016-08-22

    Signorovitch et al.[1] comment that an Oenothera-like meiosis [2] could produce a pattern similar to what we observed in our study of natural isolates of the bdelloid rotifer Adineta vaga, which we attributed to horizontal gene transfers (HGTs) [3]. Indeed, our HGT hypothesis appears at first sight difficult to conciliate with their observation of a congruent pattern of allele sharing at four large loci possibly located on different chromosomes [4]. However, one might imagine conditions under which massive horizontal gene transfer between bdelloid individuals could produce such a pattern, notably if the individuals involved had previously lost most of their heterozygosity because of their exposure to frequent desiccation (which produces DNA double-strand breaks [5]). In the published A. vaga genome the loss of heterozygosity due to large-scale gene conversion events or break-induced replication covers only about 10% of the genome [6], but this percentage may be much higher in environmental isolates that often experience dessication. Besides, if an Oenothera-like mode of meiosis occurs in bdelloids frequently enough to be detected in a single sampling of 29 individuals (as in [4]), one would expect males and meiosis to be observed at least occasionally, and instances of congruent allele sharing across loci should turn up frequently in genetic surveys. This was not the case in [3]: among the 82 A. vaga individuals sequenced for four nuclear markers, no trio of individuals presented congruent patterns of shared sequences at different loci. For these reasons, and in the absence of any direct evidence for an Oenothera-like meiosis in bdelloids, we still consider inter-bdelloid HGTs a more parsimonious explanation for our results. Copyright © 2016 Elsevier Ltd. All rights reserved.

  19. Al Pie De La Letra

    PubMed Central

    Ovbiagele, Bruce

    2014-01-01

    Background and Purpose Ethnic minorities are at higher stroke risk than non-Hispanic whites yet are less likely to have optimal vascular risk factor control. There is a need to develop culturally sensitive strategies for enhancing vascular risk reduction in minority patients with stroke. This study aimed to develop a postdischarge report card to boost treatment adherence among elderly Spanish-speaking patients with stroke within an urban health system. Methods This study included a total of 13 Spanish-only speaking participants aged ≥60 years discharged from a local government hospital in Los Angeles within 18 months of an index ischemic stroke and 6 caregivers engaged in focus groups and interviews. Structured interviews were conducted with 11 care providers and 9 administrators at the hospital. Framework analysis examined the data and elicited themes to adapt a pre-existing patient report card tool. Results Spontaneously using the same phrase, “Al pie de la letra,” several participants expressed a need to follow medical instructions accurately to prevent recurrent stroke and identified barriers/facilitators for doing so. They made comments about the pre-existing report card, advising several changes, including the clarification of phrases, and written instructions to explain the need for the card and how to fill it out. The providers and administrators recommended avenues for successfully using the card at the hospital. A new report card was created that incorporated all major perspectives. Conclusions Crafting a culturally sensitive tool for promoting treatment adherence in elderly Spanish-only-speaking patients with stroke within an urban health system using a participatory methodology is feasible. The efficacy of this new report card should be tested in a randomized controlled trial. PMID:20167904

  20. Genetics of Familial and Sporadic ALS

    ClinicalTrials.gov

    2017-01-04

    Amyotrophic Lateral Sclerosis (ALS); Familial Amyotrophic Lateral Sclerosis; Amyotrophic Lateral Sclerosis With Frontotemporal Dementia; Lou Gehrig's Disease; Motor Neuron Disease; Primary Lateral Sclerosis

  1. Mitochondrial disfunction as a cause of ALS.

    PubMed

    Pizzuti, Antonio; Petrucci, Simona

    2011-03-01

    Recent studies on patient with sporadic ALS and on in vitro and in vivo models of mendelian diseases have been addressed toward the unravelling of the mitochondrial behaviour in ALS, whether as a primarily pathogenic factor, or as a fundamental contributor to the cell death. Morphological evidence suggests mitochondria pathology in ALS and many physiological mechanisms involving these organelles appear deranged in ALS, such as energy production, apoptotic triggering, calcium homeostasis and axonal transport of mitochondria. The article briefly addresses recent advances on this field.

  2. Interfacial Phenomena in Al/Al, Al/Cu, and Cu/Cu Joints Soldered Using an Al-Zn Alloy with Ag or Cu Additions

    NASA Astrophysics Data System (ADS)

    Pstruś, Janusz; Gancarz, Tomasz

    2014-05-01

    The studies of soldered joints were carried out in systems: Al/solder/Al, Al/solder/Cu, Cu/solder/Cu, where the solder was (Al-Zn)EUT, (Al-Zn)EUT with 0.5, 1.0, and 1.5 at.% of Ag and (Al-Zn)EUT with 0.5, 1.0, and 1.5 at.% of Cu addition. Brazing was performed at 500 °C for 3 min. The EDS analysis indicated that the composition of the layers starting from the Cu pad was CuZn, Cu5Zn8, and CuZn4, respectively. Wetting tests were performed at 500 °C for 3, 8, 15, and 30 min, respectively. Thickness of the layers and their kinetics of growth were measured based on the SEM micrographs. The formation of interlayers was not observed from the side of Al pads. On the contrary, dissolution of the Al substrate and migration of Al-rich particles into the bulk of the solder were observed.

  3. Superbend era begins swiftly at the ALS

    SciTech Connect

    Robinson, Art; Tamura, Lori

    2001-11-29

    The successful installation and commissioning of high-field superconducting bend magnets (superbends) in three curved sectors of ALS storage ring was the first time the magnet lattice of an operating synchrotron light source has been retrofitted in this fundamental way. As a result, the ALS now offers an expanded spectral range well into the hard x-ray region without compromising either the number of undulators or their high brightness in the soft x-ray region for which the ALS design was originally optimized. In sum, when the superbend-enhanced ALS started up for user operations in October 2001, it marked the beginning of a new era in its history.

  4. Process for para-ethyltoluene dehydrogenation

    SciTech Connect

    Chu, C.C.

    1986-06-03

    A process is described of dehydrogenating para-ethyltoluene to selectively form para-methylstyrene comprising contacting to para-ethyltoluene under dehydrogenation reaction conditions with a catalyst composition comprising: (a) from about 30% to 60% by weight of iron oxide, calculated as ferric oxide; (b) from about 13% to 48% by weight of a potassium compound, calculated as potassium oxide; and (c) from about 0% to 5% by weight of a chromium compound, calculated as chromic oxide. The improvement is described comprising dehydrogenating the para-ethyltoluene with a catalyst composition comprising, in addition to the components (a), (b) and (c), a modifying component (d) capable of rendering the para-methylstyrene-containing dehydrogenation reaction effluent especially resistant to the subsequent formation of popcorn polymers when the dehydrogenation of para-ethyltoluene is conducted over the modified catalyst, the modifying component (d) being a bismuth compound present to the extent of from about 1% to 20% by weight of the catalyst composition, calculated as bismuth trioxide.

  5. A note on para-holomorphic Riemannian-Einstein manifolds

    NASA Astrophysics Data System (ADS)

    Ida, Cristian; Ionescu, Alexandru; Manea, Adelina

    2016-06-01

    The aim of this note is the study of Einstein condition for para-holomorphic Riemannian metrics in the para-complex geometry framework. First, we make some general considerations about para-complex Riemannian manifolds (not necessarily para-holomorphic). Next, using a one-to-one correspondence between para-holomorphic Riemannian metrics and para-Kähler-Norden metrics, we study the Einstein condition for a para-holomorphic Riemannian metric and the associated real para-Kähler-Norden metric on a para-complex manifold. Finally, it is shown that every semi-simple para-complex Lie group inherits a natural para-Kählerian-Norden Einstein metric.

  6. Spin-dependent tunneling junctions with AlN and AlON barriers

    NASA Astrophysics Data System (ADS)

    Sharma, Manish; Nickel, Janice H.; Anthony, Thomas C.; Wang, Shan X.

    2000-10-01

    We report on ferromagnetic spin-dependent tunneling (SDT) junctions with NiFe/AlN/NiFe and NiFe/AlON/NiFe structures. Good barriers were formed by plasma nitridation and oxy-nitridation of Al films. Tunneling magnetoresistance ratios (TMR) up to 18% were observed at room temperature. The devices exhibit lower resistance-area products than those seen in reference junctions with Al2O3 barriers. The degradation in TMR at higher bias voltages is found to be less than that found in standard alumina junctions. AlN and AlON could thus be alternate materials for the tunnel barrier in SDT junctions.

  7. Processing and Mechanical Properties of Directionally Solidified NiAl/NiAlTa Alloys

    NASA Technical Reports Server (NTRS)

    Johnson, D. R.; Oliver, B. F.; Noebe, R. D.; Whittenberger, J. D.

    1994-01-01

    Promising creep strengths were found for a directionally solidified NiAl-NiAlTa alloy when compared to other NiAl based intermetallics. The directionally solidified alloy had an off-eutectic composition that resulted in microstructures consisting of NiAl dendrites surrounded by aligned eutectic regions. The room temperature toughness of the two phase alloy was similar to that of polycrystalline NiAl even with the presence of the brittle Laves phase NiAlTa. Alloying additions that may improve the room temperature toughness by producing multiphase alloys are discussed.

  8. Atomic structure and oxygen deficiency of the ultrathin aluminium oxide barrier in Al/AlOx/Al Josephson junctions

    NASA Astrophysics Data System (ADS)

    Zeng, Lunjie; Tran, Dung Trung; Tai, Cheuk-Wai; Svensson, Gunnar; Olsson, Eva

    2016-07-01

    Al/AlOx/Al Josephson junctions are the building blocks of a wide range of superconducting quantum devices that are key elements for quantum computers, extremely sensitive magnetometers and radiation detectors. The properties of the junctions and the superconducting quantum devices are determined by the atomic structure of the tunnel barrier. The nanoscale dimension and disordered nature of the barrier oxide have been challenges for the direct experimental investigation of the atomic structure of the tunnel barrier. Here we show that the miniaturized dimension of the barrier and the interfacial interaction between crystalline Al and amorphous AlOx give rise to oxygen deficiency at the metal/oxide interfaces. In the interior of the barrier, the oxide resembles the atomic structure of bulk aluminium oxide. Atomic defects such as oxygen vacancies at the interfaces can be the origin of the two-level systems and contribute to decoherence and noise in superconducting quantum circuits.

  9. Atomic structure and oxygen deficiency of the ultrathin aluminium oxide barrier in Al/AlOx/Al Josephson junctions.

    PubMed

    Zeng, Lunjie; Tran, Dung Trung; Tai, Cheuk-Wai; Svensson, Gunnar; Olsson, Eva

    2016-07-12

    Al/AlOx/Al Josephson junctions are the building blocks of a wide range of superconducting quantum devices that are key elements for quantum computers, extremely sensitive magnetometers and radiation detectors. The properties of the junctions and the superconducting quantum devices are determined by the atomic structure of the tunnel barrier. The nanoscale dimension and disordered nature of the barrier oxide have been challenges for the direct experimental investigation of the atomic structure of the tunnel barrier. Here we show that the miniaturized dimension of the barrier and the interfacial interaction between crystalline Al and amorphous AlOx give rise to oxygen deficiency at the metal/oxide interfaces. In the interior of the barrier, the oxide resembles the atomic structure of bulk aluminium oxide. Atomic defects such as oxygen vacancies at the interfaces can be the origin of the two-level systems and contribute to decoherence and noise in superconducting quantum circuits.

  10. Atomic structure and oxygen deficiency of the ultrathin aluminium oxide barrier in Al/AlOx/Al Josephson junctions

    PubMed Central

    Zeng, Lunjie; Tran, Dung Trung; Tai, Cheuk-Wai; Svensson, Gunnar; Olsson, Eva

    2016-01-01

    Al/AlOx/Al Josephson junctions are the building blocks of a wide range of superconducting quantum devices that are key elements for quantum computers, extremely sensitive magnetometers and radiation detectors. The properties of the junctions and the superconducting quantum devices are determined by the atomic structure of the tunnel barrier. The nanoscale dimension and disordered nature of the barrier oxide have been challenges for the direct experimental investigation of the atomic structure of the tunnel barrier. Here we show that the miniaturized dimension of the barrier and the interfacial interaction between crystalline Al and amorphous AlOx give rise to oxygen deficiency at the metal/oxide interfaces. In the interior of the barrier, the oxide resembles the atomic structure of bulk aluminium oxide. Atomic defects such as oxygen vacancies at the interfaces can be the origin of the two-level systems and contribute to decoherence and noise in superconducting quantum circuits. PMID:27403611

  11. Microstructural and Phase Composition Differences Across the Interfaces in Al/Ti/Al Explosively Welded Clads

    NASA Astrophysics Data System (ADS)

    Fronczek, Dagmara Malgorzata; Chulist, Robert; Litynska-Dobrzynska, Lidia; Lopez, Gabriel Alejandro; Wierzbicka-Miernik, Anna; Schell, Norbert; Szulc, Zygmunt; Wojewoda-Budka, Joanna

    2017-06-01

    The microstructure and phase composition of Al/Ti/Al interfaces with respect to their localization were investigated. An aluminum-flyer plate exhibited finer grains located close to the upper interface than those present within the aluminum-base plate. The same tendency, but with a higher number of twins, was observed for titanium. Good quality bonding with a wavy shape and four intermetallic phases, namely, TiAl3, TiAl, TiAl2, and Ti3Al, was only obtained at the interface closer to the explosive material. The other interface was planar with three intermetallic compounds, excluding the metastable TiAl2 phase. As a result of a 100-hour annealing at 903 K (630 °C), an Al/TiAl3/Ti/TiAl3/Al sandwich was manufactured, formed with single crystalline Al layers. A substantial difference between the intermetallic layer thicknesses was measured, with 235.3 and 167.4 µm obtained for the layers corresponding to the upper and lower interfaces, respectively. An examination by transmission electron microscopy of a thin foil taken from the interface area after a 1-hour annealing at 825 K (552 °C) showed a mixture of randomly located TiAl3 grains within the aluminum. Finally, the hardness results were correlated with the microstructural changes across the samples.

  12. Influence of AlN thickness on AlGaN epilayer grown by MOCVD

    NASA Astrophysics Data System (ADS)

    Jayasakthi, M.; Juillaguet, S.; Peyre, H.; Konczewicz, L.; Baskar, K.; Contreras, S.

    2016-10-01

    AlGaN/AlN layers were grown by metalorganic chemical vapor deposition (MOCVD) on sapphire substrates. The AlN buffer thickness was varied from 400 nm to 800 nm. The AlGaN layer thickness was 1000 nm. The crystalline quality, thickness and composition of AlGaN were determined using high resolution X-ray diffraction (HRXRD). The threading dislocation density (TDD) was found to decrease with increase of AlN layer thickness. Reciprocal space mapping (RSM) was used to estimate the strain and relaxation between AlGaN and AlN. The optical properties of AlGaN layers were investigated by temperature dependent photoluminescence (PL). PL intensities of AlGaN layers increases with increasing the AlN thickness. The surface morphology of AlGaN was studied by atomic force microscopy (AFM). Root mean square (RMS) roughness values were found to be decreased while increase of AlN thickness.

  13. Microstructural and Phase Composition Differences Across the Interfaces in Al/Ti/Al Explosively Welded Clads

    NASA Astrophysics Data System (ADS)

    Fronczek, Dagmara Malgorzata; Chulist, Robert; Litynska-Dobrzynska, Lidia; Lopez, Gabriel Alejandro; Wierzbicka-Miernik, Anna; Schell, Norbert; Szulc, Zygmunt; Wojewoda-Budka, Joanna

    2017-09-01

    The microstructure and phase composition of Al/Ti/Al interfaces with respect to their localization were investigated. An aluminum-flyer plate exhibited finer grains located close to the upper interface than those present within the aluminum-base plate. The same tendency, but with a higher number of twins, was observed for titanium. Good quality bonding with a wavy shape and four intermetallic phases, namely, TiAl3, TiAl, TiAl2, and Ti3Al, was only obtained at the interface closer to the explosive material. The other interface was planar with three intermetallic compounds, excluding the metastable TiAl2 phase. As a result of a 100-hour annealing at 903 K (630 °C), an Al/TiAl3/Ti/TiAl3/Al sandwich was manufactured, formed with single crystalline Al layers. A substantial difference between the intermetallic layer thicknesses was measured, with 235.3 and 167.4 µm obtained for the layers corresponding to the upper and lower interfaces, respectively. An examination by transmission electron microscopy of a thin foil taken from the interface area after a 1-hour annealing at 825 K (552 °C) showed a mixture of randomly located TiAl3 grains within the aluminum. Finally, the hardness results were correlated with the microstructural changes across the samples.

  14. Effects of renal impairment on aluminum (Al) kinetics and Al-induced toxicity

    SciTech Connect

    Yokel, R.A.; McNamara, P.J.

    1986-03-01

    Al-induced toxicity most commonly occurs in the renally impaired. To study the influence of renal impairment on Al kinetics and toxicity, renally impaired rabbits were prepared by the remnant kidney procedure. Six weeks after partial nephrectomy creatinine clearance was 21% of controls and serum creatinine, BUN, Ca, and PO/sub 4/ were 222, 248, 122, and 50% of presurgery levels respectively. Serum Al kinetics after i.v. Al were: Al clearance 27%, initial and steady state volumes of distribution 50 and 80%, half life 362% and mean residence time 300% of controls (renally intact rabbits). Beginning 9 weeks after partial nephrectomy, rabbits received 145 to 160 ..mu..mole Al/kg s.c. daily, 5 x weekly x 4 weeks. Acquisition of a classically conditioned reflex (nictitating membrane extension) was impaired comparable to that produced by 100-200 ..mu..mole Al in controls but retention and extinction deficits were greater than those seen after 400 ..mu..mole Al in controls. Tissue Al concentrations were less than those seen after 200 ..mu..mole Al in controls. Body weight was comparable to that produced by 400 ..mu..mole Al in controls. These results suggest that renal impairment alters Al serum distribution, impairs its clearance, and increases the Al-induced impairment of memory and body weight gain.

  15. Diana Al-Hadid: Identity and Heritage

    ERIC Educational Resources Information Center

    Jungerberg, Tom; Smith, Anna; Borsh, Colleen

    2012-01-01

    Diana Al-Hadid's sculptures reflect the many locations, cultures, histories, and mythologies that have shaped her as an artist. In large-scale works which have the appearance of architectural ruins, Al-Hadid employs imagery drawn from many diverse interests including science and technology, history, and literature. She also incorporates images and…

  16. Diana Al-Hadid: Identity and Heritage

    ERIC Educational Resources Information Center

    Jungerberg, Tom; Smith, Anna; Borsh, Colleen

    2012-01-01

    Diana Al-Hadid's sculptures reflect the many locations, cultures, histories, and mythologies that have shaped her as an artist. In large-scale works which have the appearance of architectural ruins, Al-Hadid employs imagery drawn from many diverse interests including science and technology, history, and literature. She also incorporates images and…

  17. Durability Assessment of TiAl Alloys

    NASA Technical Reports Server (NTRS)

    Draper, Susan L.; Lerch, Bradley A.

    2008-01-01

    The durability of TiAl is a prime concern for the implementation of TiAl into aerospace engines. Two durability issues, the effect of high temperature exposure on mechanical properties and impact resistance, have been investigated and the results are summarized in this paper. Exposure to elevated temperatures has been shown to be detrimental to the room temperature ductility of gamma alloys with the most likely mechanisms being the ingress of interstitials from the surface. Fluorine ion implantation has been shown to improve the oxidation resistance of gamma alloys, and ideally it could also improve the environmental embrittlement of high Nb content TiAl alloys. The effect of F ion implantation on the surface oxidation and embrittlement of a third generation, high Nb content TiAl alloy (Ti-45Al-5Nb-B-C) were investigated. Additionally, the ballistic impact resistance of a variety of gamma alloys, including Ti-48Al-2Cr- 2Nb, Ti-47Al-2Cr-2Nb, ABB-2, ABB-23, NCG359E, 95A and Ti-45Al-5Nb-B-C was accessed. Differences in the ballistic impact properties of the various alloys will be discussed, particularly with respect to their manufacturing process, microstructure, and tensile properties.

  18. Sporadic and hereditary amyotrophic lateral sclerosis (ALS).

    PubMed

    Ajroud-Driss, Senda; Siddique, Teepu

    2015-04-01

    Genetic discoveries in ALS have a significant impact on deciphering molecular mechanisms of motor neuron degeneration. The identification of SOD1 as the first genetic cause of ALS led to the engineering of the SOD1 mouse, the backbone of ALS research, and set the stage for future genetic breakthroughs. In addition, careful analysis of ALS pathology added valuable pieces to the ALS puzzle. From this joint effort, major pathogenic pathways emerged. Whereas the study of TDP43, FUS and C9ORF72 pointed to the possible involvement of RNA biology in motor neuron survival, recent work on P62 and UBQLN2 refocused research on protein degradation pathways. Despite all these efforts, the etiology of most cases of sporadic ALS remains elusive. Newly acquired genomic tools now allow the identification of genetic and epigenetic factors that can either increase ALS risk or modulate disease phenotype. These developments will certainly allow for better disease modeling to identify novel therapeutic targets for ALS. This article is part of a Special Issue entitled: Neuromuscular Diseases: Pathology and Molecular Pathogenesis.

  19. Presymptomatic ALS genetic counseling and testing

    PubMed Central

    Stanislaw, Christine; Reyes, Eliana; Hussain, Sumaira; Cooley, Anne; Fernandez, Maria Catalina; Dauphin, Danielle D.; Michon, Sara-Claude; Andersen, Peter M.; Wuu, Joanne

    2016-01-01

    Remarkable advances in our understanding of the genetic contributions to amyotrophic lateral sclerosis (ALS) have sparked discussion and debate about whether clinical genetic testing should routinely be offered to patients with ALS. A related, but distinct, question is whether presymptomatic genetic testing should be offered to family members who may be at risk for developing ALS. Existing guidelines for presymptomatic counseling and testing are mostly based on small number of individuals, clinical judgment, and experience from other neurodegenerative disorders. Over the course of the last 8 years, we have provided testing and 317 genetic counseling sessions (including predecision, pretest, posttest, and ad hoc counseling) to 161 first-degree family members participating in the Pre-Symptomatic Familial ALS Study (Pre-fALS), as well as testing and 75 posttest counseling sessions to 63 individuals with familial ALS. Based on this experience, and the real-world challenges we have had to overcome in the process, we recommend an updated set of guidelines for providing presymptomatic genetic counseling and testing to people at high genetic risk for developing ALS. These recommendations are especially timely and relevant given the growing interest in studying presymptomatic ALS. PMID:27194384

  20. Quantitatively probing the Al distribution in zeolites.

    PubMed

    Vjunov, Aleksei; Fulton, John L; Huthwelker, Thomas; Pin, Sonia; Mei, Donghai; Schenter, Gregory K; Govind, Niranjan; Camaioni, Donald M; Hu, Jian Zhi; Lercher, Johannes A

    2014-06-11

    The degree of substitution of Si(4+) by Al(3+) in the oxygen-terminated tetrahedra (Al T-sites) of zeolites determines the concentration of ion-exchange and Brønsted acid sites. Because the location of the tetrahedra and the associated subtle variations in bond angles influence the acid strength, quantitative information about Al T-sites in the framework is critical to rationalize catalytic properties and to design new catalysts. A quantitative analysis is reported that uses a combination of extended X-ray absorption fine structure (EXAFS) analysis and (27)Al MAS NMR spectroscopy supported by DFT-based molecular dynamics simulations. To discriminate individual Al atoms, sets of ab initio EXAFS spectra for various T-sites are generated from DFT-based molecular dynamics simulations, allowing quantitative treatment of the EXAFS single- and multiple-photoelectron scattering processes out to 3-4 atom shells surrounding the Al absorption center. It is observed that identical zeolite types show dramatically different Al distributions. A preference of Al for T-sites that are part of one or more 4-member rings in the framework over those T-sites that are part of only 5- and 6-member rings in an HBEA150 zeolite has been determined using this analysis.

  1. 75 FR 62858 - United States, et al.

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-10-13

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF JUSTICE Antitrust Division United States, et al. v. American Express Company, et al.; Proposed Final Judgment and Competitive Impact Statement Notice is hereby given pursuant to the Antitrust Procedures and Penalties Act, 15 U.S.C. 16(b)-(h), that a proposed...

  2. Quantitatively Probing the Al Distribution in Zeolites

    SciTech Connect

    Vjunov, Aleksei; Fulton, John L.; Huthwelker, Thomas; Pin, Sonia; Mei, Donghai; Schenter, Gregory K.; Govind, Niranjan; Camaioni, Donald M.; Hu, Jian Z.; Lercher, Johannes A.

    2014-06-11

    The degree of substitution of Si4+ by Al3+ in the oxygen-terminated tetrahedra (Al T-sites) of zeolites determines the concentration of ion-exchange and Brønsted acid sites. As the location of the tetrahedra and the associated subtle variations in bond angles influence the acid strength, quantitative information about Al T-sites in the framework is critical to rationalize catalytic properties and to design new catalysts. A quantitative analysis is reported that uses a combination of extended X-ray absorption fine structure (EXAFS) analysis and 27Al MAS NMR spectroscopy supported by DFT-based molecular dynamics simulations. To discriminate individual Al atoms, sets of ab initio EXAFS spectra for various T-sites are generated from DFT-based molecular dynamics simulations allowing quantitative treatment of the EXAFS single- and multiple-photoelectron scattering processes out to 3-4 atom shells surrounding the Al absorption center. It is observed that identical zeolite types show dramatically different Al-distributions. A preference of Al for T-sites that are part of one or more 4-member rings in the framework over those T-sites that are part of only 5- and 6-member rings in the HBEA150 sample has been determined from a combination of these methods. This work was supported by the U. S. Department of Energy (DOE), Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences.

  3. Energetics of Al13 Keggin cluster compounds

    PubMed Central

    Armstrong, Christopher R.; Casey, William H.; Navrotsky, Alexandra

    2011-01-01

    The ϵ-Al13 Keggin aluminum hydroxide clusters are essential models in establishing molecular pathways for geochemical reactions. Enthalpies of formation are reported for two salts of aluminum centered ϵ-Keggin clusters, Al13 selenate, (Na(AlO4)Al12(OH)24(SeO4)4•12H2O) and Al13 sulfate, (NaAlO4Al12(OH)24(SO4)4•12H2O). The measured enthalpies of solution, ΔHsol, at 28 °C in 5 N HCl for the ε-Al13 selenate and sulfate are −924.57 (± 3.83) and −944.30 ( ± 5.66) kJ·mol-1, respectively. The enthalpies of formation from the elements, ΔHf,el, for Al13 selenate and sulfate are −19,656.35 ( ± 67.30) kJ·mol-1, and −20,892.39 ( ± 70.01) kJ·mol-1, respectively. In addition, ΔHf,el for sodium selenate decahydrate was calculated using data from high temperature oxide melt solution calorimetry measurements: −4,006.39 ( ± 11.91) kJ·mol-1. The formation of both ε-Al13 Keggin cluster compounds is exothermic from oxide-based components but energetically unfavorable with respect to a gibbsite-based assemblage. To understand the relative affinity of the ϵ-Keggin clusters for selenate and sulfate, the enthalpy associated with two S-Se exchange reactions was calculated. In the solid state, selenium is favored in the Al13 compound relative to the binary chalcogenate, while in 5 N HCl, sulfur is energetically favored in the cluster compound compared to the aqueous solution. This contribution represents the first thermodynamic study of ε-Al13 cluster compounds and establishes a method for other such molecules, including the substituted versions that have been created for kinetic studies. Underscoring the importance of ε-Al13 clusters in natural and anthropogenic systems, these data provide conclusive thermodynamic evidence that the Al13 Keggin cluster is a crucial intermediate species in the formation pathway from aqueous aluminum monomers to aluminum hydroxide precipitates. PMID:21852572

  4. Si Purification by Removal of Entrapped Al during Electromagnetic Solidification Refining of Si-Al Alloy

    NASA Astrophysics Data System (ADS)

    Yu, Wenzhou; Ma, Wenhui; Zheng, Zhong; Lei, Yun; Jiang, Weiyan; Li, Jie

    2017-10-01

    To investigate the effect of the removal of entrapped Al on Si purity during Al-Si electromagnetic solidification refining, the formation mechanism and removal principle of entrapped Al in primary Si were studied. The results showed that the agglomeration and irregular shape of primary Si crystals during electromagnetic solidification were the main reasons for the formation of entrapped Al; a higher initial Si content in an Al-Si alloy may result in higher amounts of entrapped Al. The entrapped Al can be effectively removed by first grinding the primary Si to powder particles of 20 μm and then leaching the particles with acid, which can simultaneously remove other impurities concentrated in the entrapped Al such as Fe, Ca, Ti, and B. Hence, it is proposed that the combination of electromagnetic solidification, acid leaching, and vacuum directional solidification could be used to obtain solar-grade silicon.

  5. Si Purification by Removal of Entrapped Al during Electromagnetic Solidification Refining of Si-Al Alloy

    NASA Astrophysics Data System (ADS)

    Yu, Wenzhou; Ma, Wenhui; Zheng, Zhong; Lei, Yun; Jiang, Weiyan; Li, Jie

    2017-06-01

    To investigate the effect of the removal of entrapped Al on Si purity during Al-Si electromagnetic solidification refining, the formation mechanism and removal principle of entrapped Al in primary Si were studied. The results showed that the agglomeration and irregular shape of primary Si crystals during electromagnetic solidification were the main reasons for the formation of entrapped Al; a higher initial Si content in an Al-Si alloy may result in higher amounts of entrapped Al. The entrapped Al can be effectively removed by first grinding the primary Si to powder particles of 20 μm and then leaching the particles with acid, which can simultaneously remove other impurities concentrated in the entrapped Al such as Fe, Ca, Ti, and B. Hence, it is proposed that the combination of electromagnetic solidification, acid leaching, and vacuum directional solidification could be used to obtain solar-grade silicon.

  6. Dose-enhancement effects in TaSi/Al- and Al-gate MOS devices

    SciTech Connect

    Fleetwood, D.M.; Beutler, D.E.; Draper, B.L.; Knott, D.; Brown, D.B.; Rosenstock, H.

    1988-01-01

    The response of MOS capacitors with TaSi/Al and Al electrodes to medium- and low-energy x-irradiation is investigated. Experimentally measured dose-enhancement effects are compared with computer simulations for these structures.

  7. NiAl alloys for structural uses

    NASA Technical Reports Server (NTRS)

    Koss, D. A.

    1991-01-01

    Alloys based on the intermetallic compound NiAl are of technological interest as high temperature structural alloys. These alloys possess a relatively low density, high melting temperature, good thermal conductivity, and (usually) good oxidation resistance. However, NiAl and NiAl-base alloys suffer from poor fracture resistance at low temperatures as well as inadequate creep strength at elevated temperatures. This research program explored macroalloying additions to NiAl-base alloys in order to identify possible alloying and processing routes which promote both low temperature fracture toughness and high temperature strength. Initial results from the study examined the additions of Fe, Co, and Hf on the microstructure, deformation, and fracture resistance of NiAl-based alloys. Of significance were the observations that the presence of the gamma-prime phase, based on Ni3Al, could enhance the fracture resistance if the gamma-prime were present as a continuous grain boundary film or 'necklace'; and the Ni-35Al-20Fe alloy was ductile in ribbon form despite a microstructure consisting solely of the B2 beta phase based on NiAl. The ductility inherent in the Ni-35Al-20Fe alloy was explored further in subsequent studies. Those results confirm the presence of ductility in the Ni-35Al-20Fe alloy after rapid cooling from 750 - 1000 C. However exposure at 550 C caused embrittlement; this was associated with an age-hardening reaction caused by the formation of Fe-rich precipitates. In contrast, to the Ni-35Al-20Fe alloy, exploratory research indicated that compositions in the range of Ni-35Al-12Fe retain the ordered B2 structure of NiAl, are ductile, and do not age-harden or embrittle after thermal exposure. Thus, our recent efforts have focused on the behavior of the Ni-35Al-12Fe alloy. A second parallel effort initiated in this program was to use an alternate processing technique, mechanical alloying, to improve the properties of NiAl-alloys. Mechanical alloying in the

  8. Phase stability in binary Ti-Al

    NASA Technical Reports Server (NTRS)

    Anderson, C. D.; Hofmeister, W. H.; Bayuzick, R. J.

    1991-01-01

    Binary Ti-Al samples containing from 46 to 54 at. pct Al were solidified while undercooled by various amounts using electromagnetic levitation techniques. A detailed thermal history of these samples was obtained with sampling rates as high as 500 KHz during recalescence. This very high sampling rate was essential to resolve the thermal events. Primary alpha solidification was observed in samples containing from 51 to 54 at. pct Al that were undercooled less than about 100 K at solidification. Primary beta solidification was found for all undercoolings tested in samples containing less than 51 at. pct Al and for undercoolings greater than about 100 K in samples containing 51 to 54 at. pct Al.

  9. The neuropathology of FTD associated With ALS.

    PubMed

    Mackenzie, Ian R A

    2007-01-01

    There is increasing recognition of a clinical overlap between frontotemporal dementia (FTD) and amyotrophic lateral sclerosis (ALS). Recent advances in our understanding of the neuropathologic, biochemical, and genetic basis of these conditions provides evidence for a common underlying pathogenesis. The neuropathology in most cases of FTD with ALS is a subtype of frontotemporal lobar degeneration, characterized by neuronal inclusions that are immunoreactive for ubiquitin but not tau (frontotemporal lobar degeneration with ubiquitinated inclusions). These cases show significant pathologic overlap with clinically pure FTD and those with classic ALS. Moreover, the ubiquitinated pathologic protein in all these conditions has recently been identified as TDP-43. A number of families have been reported with autosomal dominant FTD-ALS linked to chromosome 9p and these also have TDP-43-positive frontotemporal lobar degeneration with ubiquitinated inclusions pathology. Together, these findings suggest that FTD-ALS is part of a clinicopathologic spectrum of disease, now identified as TDP-43 proteinopathies.

  10. Photoelectrical, photophysical and photocatalytic properties of Al based MOFs: MIL-53(Al) and MIL-53-NH{sub 2}(Al)

    SciTech Connect

    An, Yang; Li, Huiliang; Liu, Yuanyuan; Huang, Baibiao; Sun, Qilong; Dai, Ying; Qin, Xiaoyan; Zhang, Xiaoyang

    2016-01-15

    Two Al based MOFs (MIL-53(Al) and MIL-53-NH{sub 2} (Al)) were synthesized, and their photoelectrical, photophysical and photocatalytic properties towards oxygen evolution from water were investigated. Different from the ligand to metal charge transfer process previously reported, we proposes a new photocatalytic mechanism based on electron tunneling according to the results of theoretical calculation, steady state and time resolved fluorescence spectra. The organic linkers absorb photons, giving rise to electrons and holes. Then, the photogenerated electrons tunnel through the AlO{sub 6}-octahedra, which not only inhibit the recombination of photogenerated charge carriers, but also is a key factor to the photocatalytic activity of Al based MOFs. - Graphical abstract: The photoelectrical, photophysical and photocatalytic properties towards oxygen evolution from water of two Al based MOFs were investigated. A new photocatalytic mechanism was proposed based on electron tunneling according to the results of both theoretical calculation and steady state, time resolved fluorescence spectra. The electron tunneling process not only inhibit the recombination of photogenerated charge carriers, but also is a key factor to the photocatalytic activity of Al based MOFs.

  11. High temperature creep behaviour of Al-rich Ti-Al alloys

    NASA Astrophysics Data System (ADS)

    Sturm, D.; Heilmaier, M.; Saage, H.; Aguilar, J.; Schmitz, G. J.; Drevermann, A.; Palm, M.; Stein, F.; Engberding, N.; Kelm, K.; Irsen, S.

    2010-07-01

    Compared to Ti-rich γ-TiAl-based alloys Al-rich Ti-Al alloys offer an additional reduction of in density and a better oxidation resistance which are both due to the increased Al content. Polycrystalline material was manufactured by centrifugal casting. Microstructural characterization was carried out employing light-optical, scanning and transmission electron microscopy and XRD analyses. The high temperature creep of two binary alloys, namely Al60Ti40 and Al62Ti38 was comparatively assessed with compression tests at constant true stress in a temperature range between 1173 and 1323 K in air. The alloys were tested in the cast condition (containing various amounts of the metastable phases Al5Ti3 and h-Al2Ti) and after annealing at 1223 K for 200 h which produced (thermodynamically stable) lamellar γ-TiAl + r-Al2Ti microstructures. In general, already the as-cast alloys exhibit a reasonable creep resistance at 1173 K. Compared with Al60Ti40, both, the as-cast and the annealed Al62Ti38 alloy exhibit better creep resistance up to 1323 K which can be rationalized by the reduced lamella spacing. The assessment of creep tests conducted at identical stress levels and varying temperatures yielded apparent activation energies for creep of Q = 430 kJ/mol for the annealed Al60Ti40 alloy and of Q = 383 kJ/mol for the annealed Al62Ti38 material. The latter coincides well with that of Al diffusion in γ-TiAl, whereas the former can be rationalized by the instability of the microstructure containing metastable phases.

  12. Microstructure and Mechanical Properties of Al-AL4C3 Materials

    DTIC Science & Technology

    2004-03-18

    MICROSTRUCTURE AND MECHANICAL PROPERTIES OF AL- AL4C3 MATERIALS Michal BESTERCI, Ľudovít PARILÁK Institute of Materials Research, Slovak Academy of...Carbon transformation to carbide Al4C3 is characterised for different heat treatment schedules and nine commercial carbon powders tested. The...transformed dispersed phase Al4C3 is than produced by a chemical reaction, which starts during milling, and it is completed at the next heat treatment

  13. Corrosion Studies of 2195 Al-Li Alloy and 2219 Al Alloy with Differing Surface Treatments

    NASA Technical Reports Server (NTRS)

    Danford, M. D.; Mendrek, M. J.

    1998-01-01

    Corrosion studies of 2195 Al-Li and 2219 Al alloys have been conducted using the scanning reference electrode technique (SRET) and the polarization resistance (PR) technique. The SRET was used to study corrosion mechanisms, while corrosion rate measurements were studied with the PR technique. Plates of Al203 blasted, soda blasted and conversion coated 2219 Al were coated with Deft primer and the corrosion rates studied with the EIS technique. Results from all of these studies are presented.

  14. Draft Genome Sequences of the Aerobic Strains Lactobacillus gasseri AL3 and AL5.

    PubMed

    Maresca, Diamante; De Filippis, Francesca; Tytgat, Hanne L P; de Vos, Willem M; Mauriello, Gianluigi

    2017-05-04

    Adaptation to the aerobic environment has been investigated in heterofermentative lactobacilli, while data on how homofermentative lactobacilli adapt to oxygen are limited. We report here the draft genome sequences of the aerobic strains Lactobacillus gasseri AL3 and AL5 that allow an in-depth investigation of the genes involved in oxidative metabolism and the stress response. Copyright © 2017 Maresca et al.

  15. The ParaScope parallel programming environment

    NASA Technical Reports Server (NTRS)

    Cooper, Keith D.; Hall, Mary W.; Hood, Robert T.; Kennedy, Ken; Mckinley, Kathryn S.; Mellor-Crummey, John M.; Torczon, Linda; Warren, Scott K.

    1993-01-01

    The ParaScope parallel programming environment, developed to support scientific programming of shared-memory multiprocessors, includes a collection of tools that use global program analysis to help users develop and debug parallel programs. This paper focuses on ParaScope's compilation system, its parallel program editor, and its parallel debugging system. The compilation system extends the traditional single-procedure compiler by providing a mechanism for managing the compilation of complete programs. Thus, ParaScope can support both traditional single-procedure optimization and optimization across procedure boundaries. The ParaScope editor brings both compiler analysis and user expertise to bear on program parallelization. It assists the knowledgeable user by displaying and managing analysis and by providing a variety of interactive program transformations that are effective in exposing parallelism. The debugging system detects and reports timing-dependent errors, called data races, in execution of parallel programs. The system combines static analysis, program instrumentation, and run-time reporting to provide a mechanical system for isolating errors in parallel program executions. Finally, we describe a new project to extend ParaScope to support programming in FORTRAN D, a machine-independent parallel programming language intended for use with both distributed-memory and shared-memory parallel computers.

  16. Ortho-para-hydrogen equilibration on Jupiter

    NASA Technical Reports Server (NTRS)

    Carlson, Barbara E.; Lacis, Andrew A.; Rossow, William B.

    1992-01-01

    Voyager IRIS observations reveal that the Jovian para-hydrogen fraction is not in thermodynamic equilibrium near the NH3 cloud top, implying that a vertical gradient exists between the high-temperature equilibrium value of 0.25 at depth and the cloud top values. The height-dependent para-hydrogen profile is obtained using an anisotropic multiple-scattering radiative transfer model. A vertical correlation is found to exist between the location of the para-hydrogen gradient and the NH3 cloud, strongly suggesting that paramagnetic conversion on NH3 cloud particle surfaces is the dominant equilibration mechanism. Below the NH3 cloud layer, the para fraction is constant with depth and equal to the high-temperature equilibrium value of 0.25. The degree of cloud-top equilibration appears to depend on the optical depth of the NH3 cloud layer. Belt-zone variations in the para-hydrogen profile seem to be due to differences in the strength of the vertical mixing.

  17. Autoguía para el telescopio 2,15 mts de CASLEO

    NASA Astrophysics Data System (ADS)

    Aballay, J. A.; Casagrande, A. R.; Pereyra, P. F.; Marún, A. H.

    Se está desarrollando un sistema de autoguía para el telescopio de 2,15 mts. El mismo se realizará aprovechando el Offset Guider. Al ocular móvil de éste se vinculará alguna cámara digital (ST4-ST7-CH250) para lograr la visión del objeto. El funcionamiento del equipo será el siguiente: primero, dadas las coordenadas del objeto a observar, se tomarán las coordenadas del telescopio para que, a través de una base de datos, se determine un campo de objetos que sirvan para la cámara de visión, luego, la PC obtendrá el offset entre la estrella de observación y la estrella seleccionada como guía, este valor será trasladado a los motores que posicionarán en forma automática el ocular. Una vez que la estrella es visualizada en la cámara (monitor de PC ) se correrá el programa que guiará el telescopio automáticamente.

  18. Japanese version of the ALS-FTD-Questionnaire (ALS-FTD-Q-J).

    PubMed

    Watanabe, Yasuhiro; Beeldman, Emma; Raaphorst, Joost; Izumi, Yuishin; Yoshino, Hiide; Masuda, Michihito; Atsuta, Naoki; Ito, Satoru; Adachi, Tadashi; Adachi, Yoshiki; Yokota, Osamu; Oda, Masaya; Hanashima, Ritsuko; Ogino, Mieko; Ichikawa, Hiroo; Hasegawa, Kazuko; Kimura, Hideki; Shimizu, Toshio; Aiba, Ikuko; Yabe, Hayato; Kanba, Makoto; Kusumi, Kimiyoshi; Aoki, Tetsuya; Hiroe, Yu; Watanabe, Hirohisa; Nishiyama, Kazutoshi; Nomoto, Masahiro; Sobue, Gen; Nakashima, Kenji

    2016-08-15

    Amyotrophic lateral sclerosis (ALS) and frontotemporal dementia (FTD) share common clinical, genetic and neuropathological features. Some ALS patients have behavioral/personality changes, which could result in significant obstacles in the care provided by family members and caregivers. An easy screening tool would contribute greatly to the evaluation of these symptoms. We translated the ALS-FTD-Questionnaire, developed in the Netherlands, into Japanese (ALS-FTD-Q-J) and examined the clinimetric properties (internal consistency, construct and clinical validity). Patients with ALS and/or behavioral variant FTD (bvFTD) were evaluated alongside healthy controls in this multicenter study. All ALS patients, regardless of bvFTD status, were further evaluated by the frontal behavioral inventory (FBI) and for frontal/executive function, cognition, anxiety/depression, and motor functions. Data from 146 subjects were analyzed: ALS (92), ALS-bvFTD (6), bvFTD (16), and healthy controls (32). The internal consistency of the ALS-FTD-Q-J was good (Cronbach α=0.92). The ALS-FTD-Q-J showed construct validity as it exhibited a high correlation with the FBI (r=0.79). However, correlations were moderate with anxiety/depression and low with cognitive scales, in contrast to the original report, i.e. a moderate correlation with cognition and a low correlation with anxiety/depression. The ALS-FTD-Q-J discriminated ALS patients from (ALS-)bvFTD patients and controls. Thus, the ALS-FTD-Q-J is useful for evaluating Japanese ALS/FTD patients.

  19. Alanes formation on the Al(111) surface

    NASA Astrophysics Data System (ADS)

    Rangan, Sylvie; Veyan, Jean-Francois; Chabal, Yves J.; Chaudhuri, Santanu; Muckerman, James T.

    2008-03-01

    Alane clusters (AlxHy) are believed to be the ubiquitous intermediates in hydrogen storage reactions for a wide variety of alanates (LiAlH4, NaAlH4) currently considered for hydrogen storage. The formation and behavior of alanes at surfaces appear to control and limit the efficiency of hydrogen storage. In particular, hydrogen adsorption on the Al(111) surface leads to the coexistence of several adsorbed species, the concentration of which is affected by the step density, the surface coverage and the temperature. We combine density functional theory (DFT) and surface infra-red (IR) absorption spectroscopy to uncover the mechanisms for alane formation on Al(111) surfaces. At low coverage, DFT predicts a two-fold bridge site adsorption for atomic hydrogen, consistent with previous Electron Energy Loss Spectroscopy measurements. At higher coverage, the formation of small chemisorbed AlH3 occurs at the step edges. With increasing coverage AlH3 is extracted from the step edge and becomes highly mobile on the terraces in a weakly bound state. This mobility is the key factor leading to the growth of larger alanes through AlH3 oligomerization. For these large alanes, previous Thermal Programmed Desorption studies are discussed and compared to the thermal stability observed in IR.

  20. Effects of hydrogen absorption in TbNiAl and UNiAl

    SciTech Connect

    Bordallo, H.N.; Nakotte, H.; Schultz, A.; Kolomiets, A.V.; Havela, L.; Andreev, A.V.

    1998-12-31

    Although hydrides of intermetallic compounds are used extensively as hydrogen-storage media, little is known about the exact nature of metal-hydrogen interactions. However, this knowledge is of essential importance for the understanding of thermodynamics and other properties. Hydrides (deuterides) of TbNiAl and UNiAl have been widely studied because of drastic increase of magnetic ordering temperature under hydrogenation. Here the authors report neutron-diffraction results of the three deuterides, TbNiAlD{sub 1.28}, TbNiAlD{sub 0.8}a nd UNiAlD{sub 2.23}.

  1. Phase stability and microstructure of Al-Ti-Fe near Al{sub 3}Ti

    SciTech Connect

    Yang, T.Y.; Goo, E.

    1995-05-01

    The phase stability and microstructure of Al-Ti-Fe near Al{sub 3}Ti at 800 C are studied by using high resolution electron microscopy and backscattered electron imaging. One of the most significant changes resulting from the addition of small amounts of iron in this system is to convert tetragonal Al{sub 3}Ti or Al{sub 2}Ti into cubic Ll{sub 2} structures. In addition, the added iron can change the stacking structure of Al{sub 2}Ti and the domain size of the long-period one-dimensional antiphase domain structures. A partial ternary phase diagram in this region is also determined.

  2. Atomistic Modeling of RuAl and (RuNi) Al Alloys

    NASA Technical Reports Server (NTRS)

    Gargano, Pablo; Mosca, Hugo; Bozzolo, Guillermo; Noebe, Ronald D.; Gray, Hugh R. (Technical Monitor)

    2002-01-01

    Atomistic modeling of RuAl and RuAlNi alloys, using the BFS (Bozzolo-Ferrante-Smith) method for alloys is performed. The lattice parameter and energy of formation of B2 RuAl as a function of stoichiometry and the lattice parameter of (Ru(sub 50-x)Ni(sub x)Al(sub 50)) alloys as a function of Ni concentration are computed. BFS based Monte Carlo simulations indicate that compositions close to Ru25Ni25Al50 are single phase with no obvious evidence of a miscibility gap and separation of the individual B2 phases.

  3. A new discontinuously reinforced aluminum MMC: Al+AlB{sub 2} flakes

    SciTech Connect

    HALL,AARON C.; ECONOMY,J.

    2000-06-08

    Development of a novel metal matrix composite based on the Al-B alloy system has been undertaken. Preparation of this discontinuously reinforced material is based on the precipitation of high aspect ratio AlB{sub 2} from an Al-B alloy. This paper describes a number of efforts forced on preparing high volume fractions (> 30 v%) of AlB{sub 2} in aluminum. New insights into the behavior of the Al-B alloys system allowed this effort to be successful.

  4. Phase diagrams of Al-Si and Al-Ge systems

    NASA Astrophysics Data System (ADS)

    Kagaya, Hiroko-Matsuo; Imazawa, Kazumoto; Sato, Mayumi; Soma, Toshinobu

    1998-03-01

    Considering the contributions from the band and local mode frequencies, the temperature- and pressure-dependent mean-square displacement for Al-Si and Al-Ge solid solutions is quantitatively calculated to be similar to that for matrix Al. Then, the concentration-dependence of the Debye temperature at higher and lower temperatures is estimated, the pressure effect on the solidus curve is presented by applying Lindeman's melting law to the Al-Si and Al-Ge alloy systems. The solidus curve obtained increases as a function of the pressure, and is in good agreement with the observed tendency for these solid solutions.

  5. Decoding ALS: from genes to mechanism.

    PubMed

    Taylor, J Paul; Brown, Robert H; Cleveland, Don W

    2016-11-10

    Amyotrophic lateral sclerosis (ALS) is a progressive and uniformly fatal neurodegenerative disease. A plethora of genetic factors have been identified that drive the degeneration of motor neurons in ALS, increase susceptibility to the disease or influence the rate of its progression. Emerging themes include dysfunction in RNA metabolism and protein homeostasis, with specific defects in nucleocytoplasmic trafficking, the induction of stress at the endoplasmic reticulum and impaired dynamics of ribonucleoprotein bodies such as RNA granules that assemble through liquid-liquid phase separation. Extraordinary progress in understanding the biology of ALS provides new reasons for optimism that meaningful therapies will be identified.

  6. Ni{sub 3}Al aluminide alloys

    SciTech Connect

    Liu, C.T.

    1993-10-01

    This paper provides a brief review of the recent progress in research and development of Ni{sub 3}Al and its alloys. Emphasis has been placed on understanding low ductility and brittle fracture of Ni{sub 3}Al alloys at ambient and elevated temperatures. Recent studies have resulted in identifying both intrinsic and extrinsic factors governing the fracture behavior of Ni{sub 3}Al alloys. Parallel efforts on alloy design using physical metallurgy principles have led to properties for structural use. Industrial interest in these alloys is high, and examples of industrial involvement in processing and utilization of these alloys are briefly mentioned.

  7. Connection between the observable and centroid structural properties of a quantum fluid: application to liquid para-hydrogen.

    PubMed

    Blinov, Nicholas; Roy, Pierre-Nicholas

    2004-02-22

    It is shown that the discrepancy between path integral Monte Carlo [M. Zoppi et al., Phys. Rev. B 65, 092204 (2002)] and path integral centroid molecular dynamics [F. J. Bermejo et al., Phys. Rev. Lett. 84, 5359 (2000)] calculations of the static structure factor of liquid para-hydrogen can be explained based on a deconvolution equation connecting centroid and physical radial distribution functions. An explicit expression for the kernel of the deconvolution equation has been obtained using functional derivative techniques. In the superposition approximation, this kernel is given by the functional derivative of the effective potential with respect to the pairwise classical potential. Results of path integral Monte Carlo calculations for the radial distribution function and the static structure factor of liquid para-hydrogen are presented.

  8. Connection between the observable and centroid structural properties of a quantum fluid: Application to liquid para-hydrogen

    NASA Astrophysics Data System (ADS)

    Blinov, Nicholas; Roy, Pierre-Nicholas

    2004-02-01

    It is shown that the discrepancy between path integral Monte Carlo [M. Zoppi et al., Phys. Rev. B 65, 092204 (2002)] and path integral centroid molecular dynamics [F. J. Bermejo et al., Phys. Rev. Lett. 84, 5359 (2000)] calculations of the static structure factor of liquid para-hydrogen can be explained based on a deconvolution equation connecting centroid and physical radial distribution functions. An explicit expression for the kernel of the deconvolution equation has been obtained using functional derivative techniques. In the superposition approximation, this kernel is given by the functional derivative of the effective potential with respect to the pairwise classical potential. Results of path integral Monte Carlo calculations for the radial distribution function and the static structure factor of liquid para-hydrogen are presented.

  9. Arsenate uptake by Al nanoclusters and other Al-based sorbents during water treatment.

    PubMed

    Mertens, Jasmin; Rose, Jérôme; Wehrli, Bernhard; Furrer, Gerhard

    2016-01-01

    In many parts of the world, arsenic from geogenic and anthropogenic sources deteriorates the quality of drinking water resources. Effective methods of arsenic removal include adsorption and coagulation with iron- and aluminum-based materials, of which polyaluminum chloride is widely employed as coagulant in water treatment due to its low cost and high efficiency. We compared the arsenic uptake capacity and the arsenic bonding sites of different Al-based sorbents, including Al nanoclusters, polyaluminum chloride, polyaluminum granulate, and gibbsite. Extended X-ray absorption fine structure (EXAFS) spectroscopy revealed that As(V) forms bidentate-binuclear complexes in interaction with all Al-based removal agents. The octahedral configuration of nanoclusters and the distribution of sorption sites remain the same in all types of removal agents consisting of nano-scale Al oxyhydroxide particles. The obtained distances for As(V)-O and As(V)-Al agreed with previously published data and were found to be 1.69 ± 0.02 Å and 3.17-3.21 Å, respectively. Our study suggests that As(V) binds to Al nanoclusters as strongly as to Al oxide surfaces. The As sorption capacity of Al nanoclusters was found to be very similar to that of Al clusters in a polyaluminum chloride. The most efficient Al-based sorbents for arsenic removal were Al nanoclusters, followed by polyaluminum granulate.

  10. Morphology of AlN whiskers grown by reacting N2 gas and Al vapor

    NASA Astrophysics Data System (ADS)

    Matsumoto, M.; Saitou, H.; Takeuchi, Y.; Harada, S.; Tagawa, M.; Ujihara, T.

    2017-06-01

    We have investigated the morphology of AlN whiskers on a polycrystalline AlN substrate by using Fe-Al alloy melts under the different synthesis conditions. Formation density of the AlN whiskers increases and the diameter of the whisker decreases with increasing Al content of the Fe-Al alloy melt. Most of the AlN whiskers were zigzag shape with the hexagonal cross section. The longitudinal direction was the [0001] direction. The facet with the zigzag shape was the {1 1 bar 01} or {1 1 bar 0 1 bar } pyramidal plane and the period of the zigzag facet was almost constant. The average diameter of the whiskers and the period of the zigzag facet decrease with increasing Al content. At the initial stage of the whisker formation, the island of AlN formed on the AlN substrate and the pyramidal facet grows via step-flow growth. From the observation, we discussed the possible mechanism for the formation of the zigzag-shape AlN whiskers.

  11. Al6H18: A baby crystal of γ-AlH3

    NASA Astrophysics Data System (ADS)

    Kiran, B.; Kandalam, Anil K.; Xu, Jing; Ding, Y. H.; Sierka, M.; Bowen, K. H.; Schnöckel, H.

    2012-10-01

    Using global-minima search methods based on the density functional theory calculations of (AlH3)n (n = 1-8) clusters, we show that the growth pattern of alanes for n ≥ 4 is dominated by structures containing hexa-coordinated Al atoms. This is in contrast to the earlier studies where either linear or ring structures of AlH3 were predicted to be the preferred structures in which the Al atoms can have a maximum of five-fold coordination. Our calculations also reveal that the Al6H18 cluster, with its hexa-coordination of the Al atoms, resembles the unit-cell of γ-AlH3, thus Al6H18 is designated as the "baby crystal." The fragmentation energies of the (AlH3)n (n = 2-8) along with the dimerization energies for even n clusters indicate an enhanced stability of the Al6H18 cluster. Both covalent (hybridization) and ionic (charge) contribution to the bonding are the driving factors in stabilizing the isomers containing hexa-coordinated Al atoms.

  12. Al6H18: a baby crystal of γ-AlH3.

    PubMed

    Kiran, B; Kandalam, Anil K; Xu, Jing; Ding, Y H; Sierka, M; Bowen, K H; Schnöckel, H

    2012-10-07

    Using global-minima search methods based on the density functional theory calculations of (AlH(3))(n) (n = 1-8) clusters, we show that the growth pattern of alanes for n ≥ 4 is dominated by structures containing hexa-coordinated Al atoms. This is in contrast to the earlier studies where either linear or ring structures of AlH(3) were predicted to be the preferred structures in which the Al atoms can have a maximum of five-fold coordination. Our calculations also reveal that the Al(6)H(18) cluster, with its hexa-coordination of the Al atoms, resembles the unit-cell of γ-AlH(3), thus Al(6)H(18) is designated as the "baby crystal." The fragmentation energies of the (AlH(3))(n) (n = 2-8) along with the dimerization energies for even n clusters indicate an enhanced stability of the Al(6)H(18) cluster. Both covalent (hybridization) and ionic (charge) contribution to the bonding are the driving factors in stabilizing the isomers containing hexa-coordinated Al atoms.

  13. Oxidation of Al2O3 continuous fiber-reinforced/NiAl composites

    NASA Technical Reports Server (NTRS)

    Doychak, J.; Nesbitt, J. A.; Noebe, R. D.; Bowman, R. R.

    1992-01-01

    The 1200 C and 1300 C isothermal and cyclic oxidation behavior of Al2O3 continuous fiber-reinforced/NiAl composites were studied. Oxidation resulted in formation of Al2O3 external scales in a similar manner as scales formed on monolithic NiAl. The isothermal oxidation of an Al2O3/NiAl composite resulted in oxidation of the matrix along the fiber/matrix interface near the fiber ends. This oxide acted as a wedge between the fiber and the matrix, and, under cyclic oxidation conditions, led to further oxidation along the fiber lengths and eventual cracking of the composite. The oxidation behavior of composites in which the Al2O3 fibers were sputter coated with nickel prior to processing was much more severe. This was attributed to open channels around the fibers which formed during processing, most likely as a result of the diffusion of the nickel coating into the matrix.

  14. InAlN/AlN/GaN heterostructures for high electron mobility transistors

    NASA Astrophysics Data System (ADS)

    Usov, S. O.; Sakharov, A. V.; Tsatsulnikov, A. F.; Lundin, V. W.; Zavarin, E. E.; Nikolaev, A. E.; Yagovkina, M. A.; Zemlyakov, V. E.; Egorkin, V. I.; Ustinov, V. M.

    2016-08-01

    The results of development of InAlN/AlN/GaN heterostructures, grown on sapphire substrates by metal-organic chemical vapour deposition, and high electron mobility transistors (HEMTs) based on them are presented. The dependencies of the InAlN/AlN/GaN heterostructure properties on epitaxial growth conditions were investigated. The optimal indium content and InAlN barrier layer thicknesses of the heterostructures for HEMT s were determined. The possibility to improve the characteristics of HEMTs by in-situ passivation by Si3N4 thin protective layer deposited in the same epitaxial process was demonstrated. The InAlN/AlN/GaN heterostructure grown on sapphire substrate with diameter of 100 mm were obtained with sufficiently uniform distribution of sheet resistance. The HEMTs with saturation current of 1600 mA/mm and transconductance of 230 mS/mm are demonstrated.

  15. Effect of Al content on magnetic properties of Fe-Al Non-oriented electrical steel

    NASA Astrophysics Data System (ADS)

    Hong, Jaewan; Choi, Hyunseo; Lee, Seil; Kim, Jae Kwan; Koo, Yang mo

    2017-10-01

    The effects of Al content (0.53 ≤ Al ≤ 9.65 wt%) on microstructure, texture, magnetic flux density, permeability, core loss and magnetic domain structure of Fe-Al based electrical steel were measured or observed. Average grain size decreased as Al content increased, but Al contents had no severe effects on texture. Magnetic flux density and permeability tends to decrease as Al content increased. Total core loss Ptot was separated into hysteresis loss Ph, eddy-current loss Pe and anomalous loss Pa. As Al increased, Ph increased, but Pe and Pa decreased, so the optimal grain size increased. To reduce core loss of electrical steel with high resistivity, annealing should be conducted at high temperature and for a long time to increase grain size.

  16. Contribution to Kinetics of Superplastic Deformation of Dispersion Strengthened Al-Al4C3 System

    NASA Astrophysics Data System (ADS)

    Besterci, Michal; Varchola, Marián; Kováč, Ladislav; Velgosová, Oksana

    2012-02-01

    The influence of temperature at constant strain rate has been evaluated with respect to superplastic behavior of dispersion strengthened Al-Al4C3 composite with 4 vol.% of Al4C3 phase. The dispersion strengthened Al-Al4C3 was prepared by powder metallurgy. Material can be characterized by grain size around 1 μm and dispersed particle Al4C3 size around 50 nm. This material showed superplastic behavior for strain rate 10-3 s-1 by test temperature 573 K. The mechanism of superplastic deformation was also investigated. For the presented material with low content of disperse particle slip on grain boundaries is typical. The final fracture is transcrystalline with dimples with their mean size 1.25 μm. The dimples are initialized by Al4C3 particles in size from 40 to 50 nm.

  17. Oxidation of Al2O3 continuous fiber-reinforced/NiAl composites

    NASA Technical Reports Server (NTRS)

    Doychak, J.; Nesbitt, J. A.; Noebe, R. D.; Bowman, R. R.

    1992-01-01

    The 1200 C and 1300 C isothermal and cyclic oxidation behavior of Al2O3 continuous fiber-reinforced/NiAl composites were studied. Oxidation resulted in formation of Al2O3 external scales in a similar manner as scales formed on monolithic NiAl. The isothermal oxidation of an Al2O3/NiAl composite resulted in oxidation of the matrix along the fiber/matrix interface near the fiber ends. This oxide acted as a wedge between the fiber and the matrix, and, under cyclic oxidation conditions, led to further oxidation along the fiber lengths and eventual cracking of the composite. The oxidation behavior of composites in which the Al2O3 fibers were sputter coated with nickel prior to processing was much more severe. This was attributed to open channels around the fibers which formed during processing, most likely as a result of the diffusion of the nickel coating into the matrix.

  18. Elimination of AlGaN epilayer cracking by spatially patterned AlN mask

    NASA Astrophysics Data System (ADS)

    Sarzyński, Marcin; Kryśko, Marcin; Targowski, Grzegorz; Czernecki, Robert; Sarzyńska, Agnieszka; Libura, Adam; Krupczyński, Wiktor; Perlin, Piotr; Leszczyński, Michał

    2006-03-01

    The inherent problem in III-nitride technology is the cracking of AlGaN layers that results from lattice mismatch between AlGaN and GaN. In case of thin substrates (30-90μm), such as, bulk GaN grown by the high-pressure/high-temperature method, the bowing of AlGaN /GaN strained structures becomes an additional problem. To eliminate cracking and bowing, AlGaN layers were grown on GaN substrates with an AlN mask patterned to form 3-15μm wide windows. In the 3μm window, the AlGaN layer was not cracked, although its thickness and Al composition exceeded critical values for growth on nonpatterned substrates. Dislocation density in the windows was of 5×106/cm2.

  19. Fabrication of Al/Mg/Al Composites via Accumulative Roll Bonding and Their Mechanical Properties

    PubMed Central

    Nie, Jinfeng; Liu, Mingxing; Wang, Fang; Zhao, Yonghao; Li, Yusheng; Cao, Yang; Zhu, Yuntian

    2016-01-01

    Al(1060)/Mg(AZ31)/Al(1060) multilayered composite was successfully produced using an accumulative roll bonding (ARB) process for up to four cycles at an elevated temperature (400 °C). The microstructure evolution of the composites and the bonding characteristics at the interfaces between Al and Mg layers with increasing ARB cycles were characterized through optical microscopy, field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM). It was found that the grains of Al and Mg layers were significantly refined and Al3Mg2 and Al12 Mg17 intermetallic compound layers formed at the Al/Mg bonding interfaces. The strength increased gradually and the ultimate tensile strength (UTS) reached a maximum value of about 240 MPa at the third pass. Furthermore, the strengthening mechanism of the composite was analyzed based on the fracture morphologies. PMID:28774072

  20. 2D ACAR momentum density study of the nature of the positron surface state on Al(100)

    SciTech Connect

    Berko, S.; Canter, K.F.; Lynn, K.G.; Mills, A.P.; Roellig, L.O.; West, R.N.

    1985-01-01

    The two-dimensional angular correlation of the 2..gamma.. annihilation radiation (2D ACAR) has been measured from an Al(100) surface bombarded by 200-eV positrons. After removing the contribution of fast para-positronium annihilation, the spectrum from positrons annihilating at the surface exhibits a nearly isotropic conical shape with a (7.1 +- 0.5) mrad FWHM. 5 refs., 6 figs.

  1. Diffusion at the Al/Al oxide interface during electromigration in wide lines

    NASA Astrophysics Data System (ADS)

    Augur, R. A.; Wolters, R. A. M.; Schmidt, W.; Dirks, A. G.; Kordić, S.

    1996-03-01

    Significant large-scale modification of the surface of Al-Si conductors was observed, due to electromigration in wide lines and under low stress conditions. After electromigration stressing the Al layers showed local thickness variations, i.e., damage by thinning. The mechanism underlying this damage causes substantial metal transport. Nevertheless, damage by thinning has received little attention in the past. Thinning was observed: (1) in a number of different alloys (Al-Si, Al-Cu, Al-Si-V, and Al-Si-V-Pd), (2) with a number of different underlayers [SiO2, W-Ti (no vacuum break after Al deposition) and W-Ti (oxidized surface before Al deposition)], (3) over an extended temperature range, (4) over a range of current density, and (5) in structures with and without passivation. The results show that thinning is a general phenomenon. An activation energy of approximately 0.5 eV was determined for the temperature dependence of a combined mechanism of concurrent thinning plus voiding in Al99Si1. Several alternatives are examined to explain the observations, namely mass movement along dislocations, Al bulk diffusion, and diffusion at the interface between the Al and its oxide. It is shown that diffusion at the Al/Al oxide interface most probably plays an important role in the damage mechanism, even under stress conditions where grain boundary diffusion is traditionally thought to dominate. Results also showed that alloying of Al with Pd can reduce the effects of damage by thinning.

  2. Interdiffusion in Diffusion Couples: U-Mo v. Al and Al-Si

    SciTech Connect

    D. D. Keiser, Jr.; E. Perez; B. Yao; Y. H. Sohn

    2009-11-01

    Interdiffusion and microstructural development in the U-Mo-Al system was examined using solid-tosolid diffusion couples consisting of U-7wt.%Mo, U-10wt.%Mo and U-12wt.%Mo vs. pure Al, annealed at 600°C for 24 hours. The influence of Si alloying addition (up to 5 wt.%) in Al on the interdiffusion microstructural development was also examined using solid-to-solid diffusion couples consisting of U-7wt.%Mo, U-10wt.%Mo and U-12wt.%Mo vs. pure Al, Al-2wt.%Si, and Al-5wt.%Si annealed at 550°C up to 20 hours. Scanning electron microscopy (SEM), transmission electron microscopy (TEM) and electron probe microanalysis (EPMA) were employed to examine the development of a very fine multiphase intermetallic layer. In ternary U-Mo-Al diffusion couples annealed at 600°C for 24 hours, interdiffusion microstructure varied of finely dispersed UAl3, UAl4, U6Mo4Al43, and UMo2Al20 phases while the average composition throughout the interdiffusion zone remained constant at approximately 80 at.% Al. Interdiffusion microstructure observed by SEM/TEM analyses and diffusion paths drawn from concentration profiles determined by EPMA appear to deviate from the assumption of “local thermodynamic equilibrium,” and suggest that interdiffusion occurs via supersaturated UAl4 followed by equilibrium transformation into UAl3, U6Mo4Al43, UAl4 and UMo2Al20 phases. Similar observation was made for U-Mo vs. Al diffusion couples annealed at 550°C. The addition of Si (up to 5 wt.%) in Al significantly reduced the thickness of the intermetallic layer by changing the constituent phases of the interdiffusion zone developed in U-Mo vs. Al-Si diffusion couples. Specifically, the formation of (U,Mo)(Al,Si)3 with relatively large solubility for Mo and Si, along with UMo2Al20 phases was observed along with disappearance of U6Mo4Al43 and UAl4 phases. Simplified understanding based on U-Al, U-Si, and Mo-Si binary phase diagrams is discussed in the light of the beneficial effect of Si alloying addition.

  3. Optical properties of TiAlC/TiAlCN/TiAlSiCN/TiAlSiCO/TiAlSiO tandem absorber coatings by phase-modulated spectroscopic ellipsometry

    NASA Astrophysics Data System (ADS)

    Jyothi, J.; Biswas, A.; Sarkar, P.; Soum-Glaude, A.; Nagaraja, H. S.; Barshilia, Harish C.

    2017-07-01

    TiAlC, TiAlCN, TiAlSiCN, TiAlSiCO, and TiAlSiO layers of thicknesses 2.2 μm, 755, 491, 393, and 431 nm, respectively, were deposited on stainless steel, silicon, and glass substrates to study their refractive indices and extinction coefficients using the phase-modulated spectroscopic ellipsometry in the wavelength range of 300-1200 nm. Absorption coefficient of each layer was calculated from the extinction coefficient of the layer. The results indicate that the first three layers (i.e., TiAlC, TiAlCN, and TiAlSiCN) are absorbing in nature, while TiAlSiCO and TiAlSiO act as intermediate and antireflection layers. Subsequently, a tandem absorber of TiAlC/TiAlCN/TiAlSiCN/TiAlSiCO/TiAlSiO with layer thicknesses of 62, 20, 18, 16, and 27 nm, respectively, was deposited on stainless steel substrates to fabricate a spectrally selective coating with absorptance of 0.961 and emittance of 0.15 at 82 °C. The obtained refractive indices and extinction coefficients of the tandem absorber were used to simulate the reflectance of the deposited tandem absorber using SCOUT software. Simulated reflectance data of the tandem absorber showed a good agreement with the experimental data measured by UV-Vis-NIR and FTIR spectrophotometry. The angular dependence of the selective properties of the tandem absorber was studied by measuring the reflectance spectra of the tandem absorber at different incident angles.

  4. Pike International, LLC et al. Information Sheet

    EPA Pesticide Factsheets

    Pike International LLC, et al. (the Company) is located in New Haven, Connecticut. The Complaint involves the lease of, and renovation activities conducted at, property constructed prior to 1978, located in New Haven, Connecticut.

  5. Substitutional alloy of Ce and Al

    PubMed Central

    Zeng, Qiao-Shi; Ding, Yang; Mao, Wendy L.; Luo, Wei; Blomqvist, Andreas; Ahuja, Rajeev; Yang, Wenge; Shu, Jinfu; Sinogeikin, Stas V.; Meng, Yue; Brewe, Dale L.; Jiang, Jian-Zhong; Mao, Ho-kwang

    2009-01-01

    The formation of substitutional alloys has been restricted to elements with similar atomic radii and electronegativity. Using high-pressure at 298 K, we synthesized a face-centered cubic disordered alloy of highly dissimilar elements (large Ce and small Al atoms) by compressing the Ce3Al intermetallic compound >15 GPa or the Ce3Al metallic glass >25 GPa. Synchrotron X-ray diffraction, Ce L3-edge absorption spectroscopy, and ab initio calculations revealed that the pressure-induced Kondo volume collapse and 4f electron delocalization of Ce reduced the differences between Ce and Al and brought them within the Hume-Rothery (HR) limit for substitutional alloying. The alloy remained after complete release of pressure, which was also accompanied by the transformation of Ce back to its ambient 4f electron localized state and reversal of the Kondo volume collapse, resulting in a non-HR alloy at ambient conditions. PMID:19188608

  6. 12th Annual ALS Users' Association Meeting

    SciTech Connect

    Robinson, Arthur L.

    1999-12-17

    Science took the front seat as 219 Advanced Light Source (ALS) users and staff gathered on Monday and Tuesday, October 18 and 19 for the twelfth annual users' meeting. The bulk of the meeting was dedicated to reports on science at the ALS. Packed into two busy days were 31 invited oral presentations and 80 submitted poster presentations, as well as time to visit 24 vendor booths. The oral sessions were dedicated to environmental science, chemical dynamics, biosciences, magnetic materials, and atomic and molecular science. In addition, there was an ALS highlights session that emphasized new results and a session comprising highlights from the young scientists who will carry the ALS into the future.

  7. ALS and Oxidative Stress: The Neurovascular Scenario

    PubMed Central

    Thakur, Keshav; Gupta, Pawan Kumar

    2013-01-01

    Oxidative stress and angiogenic factors have been placed as the prime focus of scientific investigations after an establishment of link between vascular endothelial growth factor promoter (VEGF), hypoxia, and amyotrophic lateral sclerosis (ALS) pathogenesis. Deletion of the hypoxia-response element in the vascular endothelial growth factor promoter and mutant superoxide dismutase 1 (SOD1) which are characterised by atrophy and muscle weakness resulted in phenotype resembling human ALS in mice. This results in lower motor neurodegeneration thus establishing an important link between motor neuron degeneration, vasculature, and angiogenic molecules. In this review, we have presented human, animal, and in vitro studies which suggest that molecules like VEGF have a therapeutic, diagnostic, and prognostic potential in ALS. Involvement of vascular growth factors and hypoxia response elements also highlights the converging role of oxidative stress and neurovascular network for understanding and treatment of various neurodegenerative disorders like ALS. PMID:24367722

  8. Half life of /sup 26/Al

    SciTech Connect

    Norris, T.L.; Gancarz, A.J.; Rokop, D.J.; Thomas, K.W.

    1983-01-01

    The half-life of /sup 26/Al has been redetermined because of suggestions of an error in the accepted value based on its use in calculating /sup 21/Ne production rates from cosmic rays in meteorites. Two solutions of /sup 26/Al were analyzed for the specific radioactivity and mass spectrometric determination of the /sup 26/Al concentration. The half-life obtained for /sup 26/Al was 7.05 x 10/sup 5/ years +- 3.7% at the two sigma level. This is identical to the accepted value of 7.16 x 10/sup 5/ years and indicates that problems with the /sup 21/Ne production rate is not due to an erroneous half-life.

  9. On Dobbert et al, 'Cultural Transmission...'

    ERIC Educational Resources Information Center

    Gearing, Frederick

    1984-01-01

    Criticizes Dobbert et al's model of cultural transmission (presented in earlier article) as being a species of social physics. Suggests improvements to the model, notably that observation and analysis at the emic level be taken into account. (RDN)

  10. Rogue Genes May Cause Some ALS Cases

    MedlinePlus

    ... known family history of the disease and a control group of 324 people without ALS. When researchers looked ... four times as likely as those in the control group to have rare and likely harmful gene variants -- ...

  11. On Dobbert et al, 'Cultural Transmission...'

    ERIC Educational Resources Information Center

    Gearing, Frederick

    1984-01-01

    Criticizes Dobbert et al's model of cultural transmission (presented in earlier article) as being a species of social physics. Suggests improvements to the model, notably that observation and analysis at the emic level be taken into account. (RDN)

  12. Cd ion implantation in AlN

    NASA Astrophysics Data System (ADS)

    Miranda, S. M. C.; Franco, N.; Alves, E.; Lorenz, K.

    2012-10-01

    AlN thin films were implanted with cadmium, to fluences of 1 × 1013 and 8 × 1014 at/cm2. The implanted samples were annealed at 950 °C under flowing nitrogen. Although implantation damage in AlN is known to be extremely stable the crystal could be fully recovered at low fluences. At high fluences the implantation damage was only partially removed. Implantation defects cause an expansion of the c-lattice parameter. For the high fluence sample the lattice site location of the ions was studied by Rutherford Backscattering/Channelling Spectrometry. Cd ions are found to be incorporated in substitutional Al sites in the crystal and no significant diffusion is seen upon thermal annealing. The observed high solubility limit and site stability are prerequisite for using Cd as p-type dopant in AlN.

  13. Innovative Al Damascene Process for Nanoscale Interconnects

    NASA Astrophysics Data System (ADS)

    Choi, Kyung‑In; Han, Sung‑Ho; Yun, Sera; Kim, Dae‑Yong; Hong, Jong Won; Lee, Sang Woo; Kim, Byung Hee; Kim, Sung‑Tae; Chung, U‑In; Moon, Joo‑Tae; Ryu, Byung‑Il

    2006-04-01

    A novel chemical vapor deposition (CVD)-Al technique of “bottom-up growth” was developed using methylpyrrolidine alane as a precursor and a (PVD)-TiN/CVD-TiN stacked barrier in a damascene structure. Poor step coverage of PVD-TiN caused an absence of PVD-TiN at the bottom of trenches, resulting in selective Al growth. The new method filled a 40-nm-wide trench (aspect ratio = 7.5) completely and showed robust electrical properties. The lowest line resistance was obtained at a stacked layer of PVD-TiN/CVD-Ru due to the low resistivity of Ru. Furthermore, the fine Al line structure fabricated by the new technique revealed that the Al line structure did not suffer severely from the size effect, which started to affect Cu damascene structures that were 50 nm wide.

  14. Ciencia, Sociedad, Soluciones: Una Introduccion al USGS

    USGS Publications Warehouse

    ,

    2001-01-01

    El USGS sirve a la nacion de los Estados Unidos proveyendo informacion fidedigna para ? Describir y comprender la Tierra; ? Minimizar la perdida de vidas y propiedades por desastres naturales; ? Manejar los recursos hidrologicos, biologicos, energeticos y minerales; y ? Mejorar y proteger nuestra calidad de vida.

  15. Melhoramentos no código Wilson-Devinney para binárias eclipsantes

    NASA Astrophysics Data System (ADS)

    Vieira, L. A.; Vaz, L. P. R.

    2003-08-01

    A análise de curvas de luz e velocidades radiais de sistemas binários eclipsantes pode ser feita por meio de vários modelos. Um desses é o Modelo Wilson-Devinney (WD). Ao longo dos anos, esse modelo sofreu várias alterações em seus códigos principais, com a finalidade de torná-lo mais consistente tanto fíisica como numericamente. O Modelo WD tem sido melhorado de várias maneiras em seus dois códigos: um para a predição das curvas de luz teórica e de velocidade radiais e outra para as soluções destas curvas. Teoricamente, na física do modelo, nós introduzimos a possibilidade de levar em conta os efeitos do movimento apsidal. Numericamente, nós introduzimos a possibilidade de usar o Método SIMPLEX no procedimento da solução, como uma alternativa para o já implementado Método de Mínimos Quadrados (Least Squares Method). Estas modificações, juntamente com outras já introduzidas pelo nosso grupo anteriormente, tornam o código mais eficiente na solução das curvas de luz e de velocidade radiais de binárias eclipsantes. Como o modelo tem sido usado para analisar sistemas com componentes pré-sequência principal (TY CrA, Casey et al. 1998, Vaz et al. 1998), SM 790, Stassun et al. 2003), este melhoramento beneficiará estes casos também. Apresentamos os resultados obtidos com a modificação do código WD por meio do uso de dados da estrela GL Carinae, comprovando, (1) que os parâmetros orbitais calculados por nós são coerentes com os obtidos anteriormente na literatura (Giménez & Clausen, 1986) e com os obtidos por Faria (1987), e (2) que a implementação do Método SIMPLEX torna o código mais lento mas completamente consistente internamente e evita os problemas gerados pelo uso do Método de Mínimos Quadrados, tais como imprecisão no cálculo das derivadas parciais e convergência para mínimos locais.

  16. Polymer-Oxide Nanolayer/Al Composite Cathode for Efficient Polymer Light-Emitting Diodes

    DTIC Science & Technology

    2007-06-30

    bis-(1-naphthyl)-N,N′-diphenyl-1,1′-biphenyl-4-4′-diamine (NPB) layers and made contact with the indium-tin-oxide (ITO)/ glass anode. Extensive studies...Ag:Ag2O coated on the glass substrate. The electroluminescence (EL) efficiency of 8.9 cd/A for phenyl-substituted poly(para-phenylene vinylene...of Fig. 3. The Ag:Ag2O electrode on the glass substrate, reported by Chen et al., [7] is used as a highly reflective anode, and supports the

  17. Patterns of inheritance in familial ALS.

    PubMed

    Bradley, Marcus; Bradley, Lloyd; de Belleroche, Jackie; Orrell, Richard W

    2005-05-10

    We investigated 185 families with ALS for evidence of anticipation and mitochondrial inheritance. Although initial analysis demonstrated significant anticipation of age at death between generations in patients with familial ALS, further analysis demonstrated features of regression to the mean, suggesting that the perceived differences are the result of bias. In addition, there was no evidence of an effect of preferential maternal inheritance, which would have supported transmission of mitochondrial DNA mutations.

  18. 17th Annual ALS Users' Association Meeting

    SciTech Connect

    Robinson, Art; Tamura, Lori

    2004-11-29

    It's not exactly Russian roulette, but scheduling October events outdoors is not risk-free, even in usually sunny California. An overflow crowd of more than 400 registered users, ALS staff, and vendors enjoyed a full indoor program featuring science highlights and workshops spread over two and a half days from October 18 to October 20. However, a major storm, heralding the onset of the San Francisco Bay Area rainy season, posed a few weather challenges for the events on the ALS patio.

  19. Modeling of precipitation in Al alloys

    SciTech Connect

    Asta, M.; Foiles, S.M.; Wolfer, W.G.

    1996-10-01

    Objective was the development of a computational model of precipitation from a supersaturated alloy solid solution. The model is based on the formalism of chemical-reaction-rate theory combined with classical descriptions of precipitate thermodynamic properties and a mean-field treatment of diffusion-limited growht and coarsening. For the case of precipitation of Al{sub 3}Sc in supersaturated Al-Sc alloys, it is demonstrated how the model can be used to calculate number densities and size distributions of precipitates as a function of aging time and temperature, including effects of continuous cooling and thermally generated point defects. Application of the model to a specific alloy system requires knowledge of diffusion data, point defect energetics, and thermodynamic properties for bulk phases and interphase interfaces. For interfaces and point defects, thermodynamic data can be difficult to measure and reliable values of defect free energies are often unavailable. For this reason, part of the efforts were devoted to applying semiempirical and first-principles atomistic techniques to the calculation of interfacial and point-defect thermodynamic properties. This report discusses applications for interphase interfaces in the Al-Ag, Al-Sc, and Al-Li alloy systems. We also describe atomistic work aimed at understanding the energetics of vacancy clusters in Al. These clusters serve as sinks for isolated vacancies during aging and their growth can lead to more complex defects, such as dislocation loops, that act as heterogeneous nucleation sites.

  20. How common are ALS plateaus and reversals?

    PubMed

    Bedlack, Richard S; Vaughan, Timothy; Wicks, Paul; Heywood, Jamie; Sinani, Ervin; Selsov, Roger; Macklin, Eric A; Schoenfeld, David; Cudkowicz, Merit; Sherman, Alex

    2016-03-01

    To determine the frequency of amyotrophic lateral sclerosis (ALS) plateaus and reversals in the Pooled Resource Open-Access ALS Clinical Trials (PRO-ACT) database. We analyzed Amyotrophic Lateral Sclerosis Functional Rating Scale (ALSFRS) and ALSFRS-revised (ALSFRS-R) data from PRO-ACT participants. The frequencies of participants experiencing plateaus (periods where scores did not change) were calculated over 6-, 12-, and 18-month epochs. The percentage of participants ever experiencing reversals (periods where scores improved) of different lengths were also calculated and plotted. Over 6 months, 25% of 3,132 participants did not decline. Over 12 months, 16% of 2,105 participants did not decline. Over 18 months, 7% of 1,218 participants did not decline. Small ALS reversals were also common, especially over shorter follow-up intervals; 14% of 1,343 participants had a 180-day interval where their ALSFRS-R slope was greater than zero. Fewer than 1% of participants ever experienced improvements of 4 or more ALSFRS-R points lasting at least 12 months. ALS plateaus and small reversals are common, especially over brief intervals. In light of these data, stable disease, especially for a short period of time, should not be interpreted as an ALS treatment effect. Large sustained ALS reversals, on the other hand, are rare, potentially important, and warrant further study. © 2015 American Academy of Neurology.

  1. Unusual Properties of Al_2H_6

    NASA Astrophysics Data System (ADS)

    Ganteför, G.; Burkart, S.; Seifert, G.; Rao, B. K.; Jena, P.

    2000-03-01

    Ab initio calculations based on density functional theory and generalized gradient approximation reveal the structure of Al_2H6 to be that of di-borane (B_2H_6) even though the chemistry of Al and B clusters are different. With an electron affinity of 0.44 eV and ionization potential of 10.14 eV, Al_2H6 bears the signature of a "magic" cluster. Unlike magic clusters in metallic systems, Al_2H6 is born out of the coalescence of two AlH3 which are also "magic" by themselves as dictated by their low electron affinity (0.28 eV) and high ionization potential (11.43 eV). The most striking property of Al_2H_6, however, is that its vertical electron detachment energy is about 2 eV higher than its adiabatic electron affinity signifying vast changes between the geometries of the anion and the neutral cluster. These predictions are verified experimentally by photodetachment spectroscopy.

  2. Theoretics-directed effect of copper or aluminum content on the ductility characteristics of Al-based (Al3Ti, AlTi, AlCu, AlTiCu2) intermetallic compounds

    NASA Astrophysics Data System (ADS)

    Li, Yong; Ma, Xiao-Juan; Liu, Qi-Jun; Kong, Ge-Xing; Ma, Hai-Xia; Wang, Wen-Peng; Wang, Yi-Gao; Jiao, Zhen; Liu, Fu-Sheng; Liu, Zheng-Tang

    2016-11-01

    First-principle simulations have been applied to investigate the effect of copper (Cu) or aluminum (Al) content on the ductility of Al3Ti, AlTi, AlCu, and AlTiCu2 alloys. The mechanical stable and elastic properties of Al-based intermetallic compounds are researched by density functional theory with the generalized gradient approximation (DFT-GGA). The calculated lattice constants are in conformity with the previous experimental and theoretical data. The deduced elastic constants show that the investigated Al3Ti, AlTi, AlCu, and AlTiCu2 structures are mechanically stable. Shear modulus, Young’s modulus, Poisson’s ratio, and the ratio B/G have also been figured out by using reckoned elastic constants. A further analysis of Young’s modulus and Poisson’s ratio reveals that the third added element copper content has significant effects on the Al-Ti-based ICs ductile character. Project supported by the National Natural Science Foundation of China (Grant Nos. 41674088, 11574254, 11272296, and 11547311), the National Basic Research Program of China (Grant No. 2011CB808201), the Fundamental Research Fund for the Central Universities, China (Grant Nos. 2682014ZT30 and 2682014ZT31), and the Fund of the State Key Laboratory of Solidification Processing in Northwestern Polytechnical University, China (Grant No. SKLSP201511).

  3. Brain FDG-PET changes in ALS and ALS-FTD.

    PubMed

    Renard, Dimitri; Collombier, Laurent; Castelnovo, Giovanni; Fourcade, Genevieve; Kotzki, Pierre-Olivier; LaBauge, Pierre

    2011-12-01

    FDG-PET in ALS most typically demonstrates a primary (and sometimes also supplementary) motor cortex hypometabolism, often associated with more diffuse cortical hypometabolism involving mostly the dorsolateral prefrontal cortex, the medial and lateral premotor cortices, and the bilateral insular cortex involvement. In ALS-FTD, extensive temporal hypometabolism is seen in addition to severe diffuse frontal hypometabolism. This study analyses FDG-PET findings in 6 ALS patients and 4 ALS-FTD patients. In addition to earlier described areas of hypometabolism in ALS, we found also reduced FDG-PET metabolism in the medial frontal cortex, the orbitofrontal cortex, and the anterior temporal lobe in our ALS patients. The anterolateral area was the best preserved part of the frontal lobe in ALS patients. In ALS-FTD, frontal and temporal hypometabolism was severe (and parietal hypometabolism was often also present) with relatively preserved perirolandic metabolism. In ALS, more diffuse frontal and temporal FDG-PET hypometabolism was seen than earlier reported, with the anterolateral area as the best preserved part of the frontal lobe. In ALS-FTD, relatively preserved perirolandic metabolism was seen, associated with severe frontal and temporal hypometabolism.

  4. Metastability in the MgAl2O4-Al2O3 System

    DOE PAGES

    Wilkerson, Kelley R.; Smith, Jeffrey D.; Hemrick, James G.

    2014-07-22

    Aluminum oxide must take a spinel form ( γ-Al2O3) at elevated temperatures in order for extensive solid solution to form between MgAl2O4 and α-Al2O3. The solvus line between MgAl2O4 and Al2O3 has been defined at 79.6 wt% Al2O3 at 1500°C, 83.0 wt% Al2O3 at 1600°C, and 86.5 wt% Al2O3 at 1700°C. A metastable region has been defined at temperatures up to 1700°C which could have significant implications for material processing and properties. Additionally, initial processing could have major implications on final chemistry. The spinel solid solution region has been extended to form an infinite solid solution with Al2O3 at elevatedmore » temperatures. A minimum in melting at 1975°C and a chemistry of 96 wt% Al2O3 rather than a eutectic is present, resulting in no eutectic crystal formation during solidification.« less

  5. Temperature dependence of the dielectric response of anodized Al-Al2O3-metal capacitors

    NASA Astrophysics Data System (ADS)

    Hickmott, T. W.

    2003-03-01

    The temperature dependence of capacitance, CM, and conductance, GM, of Al-Al2O3-metal capacitors with Cu, Ag, and Au electrodes has been measured between 100 and 340 K at seven frequencies between 10 kHz and 1 MHz. Al2O3 films between 15 and 64 nm thick were formed by anodizing evaporated Al films in borate-glycol or borate-H2O electrolyte. The interface capacitance at the Al2O3-metal interface, CI, which is in series with the capacitance CD due to the Al2O3 dielectric, is determined from plots of 1/CM versus insulator thickness. CI is not fixed for a given metal-insulator interface but depends on the vacuum system used to deposit the metal electrode. CI is nearly temperature independent. When CI is taken into account the dielectric constant of Al2O3 determined from capacitance measurements is ˜8.3 at 295 K. The dielectric constant does not depend on anodizing electrolyte, insulator thickness, metal electrode, deposition conditions for the metal electrode or measurement frequency. By contrast, GM of Al-Al2O3-metal capacitors depends on both the deposition conditions of the metal and on the metal. For Al-Al2O3-Cu capacitors, GM is larger for capacitors with large values of 1/CI that result when Cu is evaporated in an oil-pumped vacuum system. For Al-Al2O3-Ag capacitors, GM does not depend on the Ag deposition conditions.

  6. Vibrational properties of CaAlH5 and α-AlH3 with different AlH6 networks studied by inelastic neutron scattering.

    PubMed

    Sato, Toyoto; Ramirez-Cuesta, A J; Ikeda, Kazutaka; Orimo, Shin-ichi; Yamada, Kazuyoshi

    2011-09-05

    We performed a combined study using inelastic neutron scattering (INS) and first-principles calculations of the vibrational properties of CaAlH(5) and α-AlH(3) with different AlH(6) networks, a zigzag one-dimensional AlH(6) network for CaAlH(5), and a three-dimensional AlH(6) network for α-AlH(3). Both materials showed qualitatively similar INS spectra, in which CaAlH(5)/α-AlH(3) was mainly divided into three regions: (i) the translational modes (318/316 cm(-1)), (ii) the librational modes of the octahedral AlH(6) units (external molecular motion) in the lower frequency range and H-Al-H bond-bending modes (intra molecular motion) at a higher frequency (420-1157/513-1038 cm(-1)), and (iii) the Al-H bond-stretching modes (1238-1750/1486-1942 cm(-1)). In region ii, the appearance of both librational and bond-bending modes was determined by the networked nature of the octahedral AlH(6) units. In addition, the librational modes of AlH(6) on α-AlH(3) exhibit higher frequencies than CaAlH(5) due to the tighter bonding between the octahedral AlH(6) units. With regard to average frequencies for the Al-H, ω(S), bond-stretching modes, and average Al-H bond distances on the aluminum-based hydrides including CaAlH(5) and α-AlH(3), ω(S) showed lower frequencies that correlate with lengthening of the Al-H bond distances.

  7. Quantum dynamical simulations for nuclear spin selective laser control of ortho- and para-fulvene.

    PubMed

    Belz, S; Grohmann, T; Leibscher, M

    2009-07-21

    In the present paper we explore the prospects for laser control of the photoinduced nonadiabatic dynamics of para- and ortho-fulvene with the help of quantum dynamical simulations. Previous investigations [Bearpark et al., J. Am. Chem. Soc. 118, 5253 (1996); Alfalah et al., J. Chem. Phys. 130, 124318 (2009)] show that photoisomerization of fulvene is hindered by ultrafast radiationless decay through a conical intersection at planar configuration. Here, we demonstrate that photoisomerization can nevertheless be initiated by damping unfavorable nuclear vibrations with properly designed laser pulses. Moreover, we show that the resulting intramolecular torsion is nuclear spin selective. The selectivity of the photoexcitation with respect to the nuclear spin isomers can be further enhanced by applying an optimized sequence of two laser pulses.

  8. Relative importance of hydrolyzed Al(III) species (Al(a), Al(b), and Al(c)) during coagulation with polyaluminum chloride: a case study with the typical micro-polluted source waters.

    PubMed

    Yan, Mingquan; Wang, Dongsheng; Qu, Jiuhui; He, Wenjie; Chow, Christopher W K

    2007-12-15

    The relative importance of three different Al species, Al(a) (monomeric species, instantaneous reacted species), Al(b) (medium polymer species, reacted less than 120 min), and Al(c) (colloidal or solid species, no reaction), defined by timed complexation reaction rate measured by using ferron reagent in polyaluminum chloride (PACl) was investigated in terms of DOC (dissolved organic carbon), UV(254), and turbidity removal efficiencies. Micro-polluted, typical North China, source waters were used to conduct the experiments. The results show that DOC removal is correlated well to the content of Al(b). Removal of UV(254) is determined by the content of Al(b) and Al(c), particularly Al(c). Turbidity removal is primarily related to the content of Al(c); however, Al(b) could destabilize particles efficiently, and the flocs formed by Al(b) are not as large as those formed by Al(c), which affected the settling efficiency. Unlike the preformed Al(b), the in situ formed Al(b) could remove turbidity more efficiently since Al(c) is the dominant final species formed during coagulation. Al(a) shows a strong ability to react with some unsatisfied coordinate bonds of organic matter to facilitate particle and DOC removal. The distinct coagulation feature of Al(a), Al(b), and Al(c) can be applied to develop tailor-made PACl (with the correct distribution of Al species) to match the characteristics of raw water for optimized coagulation.

  9. Hox and ParaHox gene expression in early body plan patterning of polyplacophoran mollusks

    PubMed Central

    Fritsch, Martin; Wollesen, Tim

    2016-01-01

    ABSTRACT Molecular developmental studies of various bilaterians have shown that the identity of the anteroposterior body axis is controlled by Hox and ParaHox genes. Detailed Hox and ParaHox gene expression data are available for conchiferan mollusks, such as gastropods (snails and slugs) and cephalopods (squids and octopuses), whereas information on the putative conchiferan sister group, Aculifera, is still scarce (but see Fritsch et al., 2015 on Hox gene expression in the polyplacophoran Acanthochitona crinita). In contrast to gastropods and cephalopods, the Hox genes in polyplacophorans are expressed in an anteroposterior sequence similar to the condition in annelids and other bilaterians. Here, we present the expression patterns of the Hox genes Lox5, Lox4, and Lox2, together with the ParaHox gene caudal (Cdx) in the polyplacophoran A. crinita. To localize Hox and ParaHox gene transcription products, we also investigated the expression patterns of the genes FMRF and Elav, and the development of the nervous system. Similar to the other Hox genes, all three Acr‐Lox genes are expressed in an anteroposterior sequence. Transcripts of Acr‐Cdx are seemingly present in the forming hindgut at the posterior end. The expression patterns of both the central class Acr‐Lox genes and the Acr‐Cdx gene are strikingly similar to those in annelids and nemerteans. In Polyplacophora, the expression patterns of the Hox and ParaHox genes seem to be evolutionarily highly conserved, while in conchiferan mollusks these genes are co‐opted into novel functions that might have led to evolutionary novelties, at least in gastropods and cephalopods. PMID:27098677

  10. Hox and ParaHox gene expression in early body plan patterning of polyplacophoran mollusks.

    PubMed

    Fritsch, Martin; Wollesen, Tim; Wanninger, Andreas

    2016-03-01

    Molecular developmental studies of various bilaterians have shown that the identity of the anteroposterior body axis is controlled by Hox and ParaHox genes. Detailed Hox and ParaHox gene expression data are available for conchiferan mollusks, such as gastropods (snails and slugs) and cephalopods (squids and octopuses), whereas information on the putative conchiferan sister group, Aculifera, is still scarce (but see Fritsch et al., 2015 on Hox gene expression in the polyplacophoran Acanthochitona crinita). In contrast to gastropods and cephalopods, the Hox genes in polyplacophorans are expressed in an anteroposterior sequence similar to the condition in annelids and other bilaterians. Here, we present the expression patterns of the Hox genes Lox5, Lox4, and Lox2, together with the ParaHox gene caudal (Cdx) in the polyplacophoran A. crinita. To localize Hox and ParaHox gene transcription products, we also investigated the expression patterns of the genes FMRF and Elav, and the development of the nervous system. Similar to the other Hox genes, all three Acr-Lox genes are expressed in an anteroposterior sequence. Transcripts of Acr-Cdx are seemingly present in the forming hindgut at the posterior end. The expression patterns of both the central class Acr-Lox genes and the Acr-Cdx gene are strikingly similar to those in annelids and nemerteans. In Polyplacophora, the expression patterns of the Hox and ParaHox genes seem to be evolutionarily highly conserved, while in conchiferan mollusks these genes are co-opted into novel functions that might have led to evolutionary novelties, at least in gastropods and cephalopods.

  11. Protective Al2O3 scale formation on NbAl3-base alloys

    NASA Technical Reports Server (NTRS)

    Doychak, J.; Hebsur, M. G.

    1991-01-01

    The oxidation of NbAl3 with additions of Cr and Y was studied to determine the mechanisms of the beneficial effects of these elements upon oxidation. Cr additions to the binary NbAl3 alloy of up to 6.8 at. percent reduced the scale growth rates and promoted alpha-Al2O3 formation over much longer times relative to binary NbAl3. A major effect of Cr is to form a layer of AlNbCr at the metal/scale interface, which is inherently more oxidation-resistant than the matrix alloy in the long term. Yttrium additions to a Cr-containing alloy improved the scale growth rate and adherence and changed the scale microstructure to mimic that of a typical protective Al2O3 scale.

  12. Magnetic behavior of CoPt-AlN granular structure laminated with AlN layers

    NASA Astrophysics Data System (ADS)

    Yu, Youxing; Shi, Ji; Nakamura, Yoshio

    2011-04-01

    The magnetic behavior of CoPt-AlN granular structure laminated with AlN layers has been studied. Ultrathin multilayer structure, [CoPt0.5 nm/AlN0.5nm]4, is used as the precursor of the magnetic layers, which are separated by 5-nm-thick AlN layers. Upon thermal annealing, the ultrathin multilayer transforms into CoPt-AlN granular structure, and the thick AlN layers remain to be spacers. When the film was annealed at 400 °C, the out-of-plane direction becomes the easy axis of magnetization, although the coercivity remains small. TEM observation has proved that CoPt shows disklike shape at such an annealing temperature. When increasing the annealing temperature to 600 °C and above, the films show "isotropic" magnetic behavior due to the formation of equiaxial CoPt particles in the magnetic layers.

  13. Effects of Al(III) and Nano-Al13 Species on Malate Dehydrogenase Activity

    PubMed Central

    Yang, Xiaodi; Cai, Ling; Peng, Yu; Li, Huihui; Chen, Rong Fu; Shen, Ren Fang

    2011-01-01

    The effects of different aluminum species on malate dehydrogenase (MDH) activity were investigated by monitoring amperometric i-t curves for the oxidation of NADH at low overpotential using a functionalized multi-wall nanotube (MWNT) modified glass carbon electrode (GCE). The results showed that Al(III) and Al13 can activate the enzymatic activity of MDH, and the activation reaches maximum levels as the Al(III) and Al13 concentration increase. Our study also found that the effects of Al(III) and Al13 on the activity of MDH depended on the pH value and aluminum speciation. Electrochemical and circular dichroism spectra methods were applied to study the effects of nano-sized aluminum compounds on biomolecules. PMID:22163924

  14. Triclinic Ni[sub 2]Al phase in 63. 1 atomic percent NiAl

    SciTech Connect

    Murthy, A.S.; Goo, E. . Dept. of Materials Science and Engineering)

    1994-01-01

    Transmission electron microscopy (TEM) studies on the 63.1 at pct NiAl specimens aged in the L1[sub 0] phase indicate the presence of localized regions consisting of very high-density twins along with precipitates of Ni[sub 2]Al stoichiometry. In regions representative of the 7R phase, it is observed that the ordered Ni[sub 2]Al phase exists in lattice correspondence with the 7R phase. Based on the electron-diffraction results, the crystal structure of this Ni[sub 2]Al phase is determined to be triclinic, belonging to the space group P[bar 1]. This new Ni[sub 2]Al phase alternatively may be viewed as a periodically microtwinned monoclinic Ni[sub 2]Al phase, existing in coherence with the matrix L1[sub 0] phase that is also periodically microtwinned.

  15. Potential skin involvement in ALS: revisiting Charcot's observation - a review of skin abnormalities in ALS.

    PubMed

    Paré, Bastien; Gros-Louis, François

    2017-03-25

    Amyotrophic lateral sclerosis (ALS) is a neurodegenerative disease affecting motor neurons of the brain and spinal cord, leading to progressive paralysis and death. Interestingly, many skin changes have been reported in ALS patients, but never as yet fully explained. These observations could be due to the common embryonic origin of the skin and neural tissue known as the ectodermal germ layer. Following the first observation in ALS patients' skin by Dr Charcot in the 19th century, in the absence of bedsores unlike other bedridden patients, other morphological and molecular changes have been observed. Thus, the skin could be of interest in the study of ALS and other neurodegenerative diseases. This review summarizes skin changes reported in the literature over the years and discusses about a novel in vitro ALS tissue-engineered skin model, derived from patients, for the study of ALS.

  16. Microscopic Properties of Long-Period Ordering in Al-Rich TiAl Alloys

    NASA Astrophysics Data System (ADS)

    Hata, S.; Nakano, T.; Kuwano, N.; Itakura, M.; Matsumura, S.; Umakoshi, Y.

    2008-07-01

    The ordering mechanism of long-period superstructures (LPSs) in Al-rich TiAl alloys has been investigated by high-resolution transmission electron microscopy (HRTEM). The LPSs are classified in terms of arrangements of base clusters with different shapes and compositions formed in Ti-rich (002) layers of L10-TiAl matrix: square Ti4Al, fat rhombus Ti3Al, and lean rhombus Ti2Al type clusters. The HRTEM observations revealed that antiphase boundaries of long-range-ordered LPS domains and short-range-ordered microdomains are constructed by various space-filling arrangements of the base clusters. Such a microscopic property characterized by the base clusters and their arrangements is markedly analogous to that of the {left< {{text{1,1/2,0}}} rightrangle } * special-point ordering alloys such as Ni-Mo.

  17. Effects of Al(III) and nano-Al13 species on malate dehydrogenase activity.

    PubMed

    Yang, Xiaodi; Cai, Ling; Peng, Yu; Li, Huihui; Chen, Rong Fu; Shen, Ren Fang

    2011-01-01

    The effects of different aluminum species on malate dehydrogenase (MDH) activity were investigated by monitoring amperometric i-t curves for the oxidation of NADH at low overpotential using a functionalized multi-wall nanotube (MWNT) modified glass carbon electrode (GCE). The results showed that Al(III) and Al(13) can activate the enzymatic activity of MDH, and the activation reaches maximum levels as the Al(III) and Al(13) concentration increase. Our study also found that the effects of Al(III) and Al(13) on the activity of MDH depended on the pH value and aluminum speciation. Electrochemical and circular dichroism spectra methods were applied to study the effects of nano-sized aluminum compounds on biomolecules.

  18. TEM studies of oxidized NiAl and Ni3Al cross sections

    NASA Technical Reports Server (NTRS)

    Doychak, J.; Ruhle, M.

    1989-01-01

    Cross sections of oxide scale/(Ni-Al) intermetallics were prepared by a new method and studied using primarily TEM. The cross sections were prepared by encasing an oxidized metal specimen sandwich in a low-melting-temperature zinc alloy. Observations of oxidized zirconium-doped beta-NiAl cross sections revealed crystallographic voids beneath an adherent Al2O3 scale. The oxide-metal interface was incoherent, but a high dislocation density in the metal near the interface suggested that a large tensile stress was induced by the attached oxide scale. A duplex Al2O3-NiAl2O4 scale formed on zirconium-doped and zirconium/boron-doped gamma-prime-Ni3Al alloys. Additional results are presented involving oxidation mechanisms and oxide-metal interface structures.

  19. Improved AlGaN/GaN high electron mobility transistor using AlN interlayers

    NASA Astrophysics Data System (ADS)

    Jiménez, A.; Bougrioua, Z.; Tirado, J. M.; Braña, A. F.; Calleja, E.; Muñoz, E.; Moerman, I.

    2003-06-01

    This work reports on the effects of AlN interlayers embedded into the GaN semi-insulating buffer of AlGaN/GaN high electron mobility transistors, in comparison with standard heterostructures without AlN interlayers. Detailed optical and structural characterization data are presented, along with computer simulation results. The AlN interlayers generate a compressive strain in the GaN topmost layer, which slightly reduces the total polarization field, but most important, it prevents the AlGaN barrier from plastic relaxation. The final result is an enhanced polarization field with respect to standard heterostructures, providing an increased channel carrier density and pinch-off voltage. Electrical characterization confirms the advantages of using AlN interlayers, reaching maximum drain current density and extrinsic transconductance as high as 1.4 A/mm and 266 mS/mm, respectively, for 0.2-μm gate length.

  20. Thermal Properties in the MgAl2O4-Al2O3 System

    SciTech Connect

    Wilkerson, Dr. Kelley R.; Smith, Jeffrey D; Hemrick, James Gordon

    2013-01-01

    Compositional effects on the thermal diffusivity in the MgAl2O4-Al2O3 system were studied. The lowest thermal diffusivity, 0.0258 +/-5% cm/s, was measured between 79.8 and 83.9 wt% Al2O3 quenched from various temperatures between 1500 and 1700C. All of the chemistries in this range extend past the solvus, but still form a singe super-saturated spinel solid solution, regardless of quenching tempeature. A super-saturated metastable solid solution region was observed at 1500, 1600, and 1700C extending to 83.9, 85.2, and 87.1 wt% Al2O3, respectively. Beyond 83.9% Al2O3 a significant increase in thermal diffusivity, 11.7%, was observed and its attributed to precipiation of Al2O3 through spinodal decomposition.

  1. Process Capability Analysis of Vacuum Moulding for Development of Al-Al2O3 MMC

    NASA Astrophysics Data System (ADS)

    Singh, R.

    2013-01-01

    The purpose of the present study is to investigate process capability of vacuum moulding (VM) for development of Al-Al2O3 metal matrix composite (MMC). Starting from the identification of component, prototypes were prepared (with three different input parameters namely: vacuum pressure; component volume and sand grit size to give output in form of dimensional accuracy). Measurements on the coordinate measuring machine helped in calculating the dimensional tolerances of the Al-Al2O3 MMC prepared. Some important mechanical properties were also compared to verify the suitability of the components. Final components produced are acceptable as per ISO standard UNI EN 20286-I (1995). The results of study suggest that VM process lies in ±4.5 sigma (σ) limit as regard to dimensional accuracy of Al-Al2O3 MMC is concerned. This process ensures rapid production of pre-series technological prototypes and proof of concept at less production cost and time.

  2. Structural inheritance and difference between Ti2AlC, Ti3AlC2 and Ti5Al2C3 under pressure from first principles

    NASA Astrophysics Data System (ADS)

    Gao, Qing-He; Du, An; Yang, Ze-Jin

    2017-01-01

    The structural inheritance and difference between Ti2AlC, Ti3AlC2 and Ti5Al2C3 under pressure from first principles are studied. The results indicate that the lattice parameter a are almost the same within Ti2AlC, Ti3AlC2 and Ti5Al2C3, and the value of c in Ti5Al2C3 is the sum of Ti2AlC and Ti3AlC2 which is revealed by the covalently bonded chain in the electron density difference: Al-Ti-C-Ti-Al for Ti2AlC, Al-Ti2-C-Ti1-C-Ti2-Al for Ti3AlC2 and Al-Ti3-C2-Ti3-Al-Ti2-C1-Ti1-C1-Ti2-Al for Ti5Al2C3. The calculated axial compressibilities, volumetric shrinkage, elastic constant c11, c33/c11 ratio, bulk modulus, shear modulus, and Young’s modulus of Ti5Al2C3 are within the range of the end members (Ti2AlC and Ti3AlC2) in a wide pressure range of 0-100 GPa. Only Ti2AlC is isotropic crystal at about 50 GPa within the Ti-Al-C compounds. All of the Ti 3d density of states curves of the three compounds move from lower energy to higher energy level with pressure increasing. The similarities of respective bond length, bond overlap population (Ti-C, Ti-Al and Ti-Ti), atom Mulliken charges under pressure as well as the electron density difference for the three compounds are discovered. Among the Ti-Al-C ternary compounds, Ti-Ti bond behaves least compressibility, whereas the Ti-Al bond is softer than that of Ti-C bonds, which can also been confirmed by the density of states and electron density difference. Bond overlap populations of Ti-Ti, Ti-C and Ti-Al indicate that the ionicity interaction becomes more and more stronger in the three structures as the pressure increasing. Mulliken charges of Ti1, Ti2, Ti3, C and Al are 0.65, 0.42, 0.39, -0.73, -0.04 at 0 GPa, respectively, which are consistent with the Pauling scale.

  3. The lowest ionization potentials of Al2

    NASA Technical Reports Server (NTRS)

    Bauschlicher, Charles W., Jr.; Barnes, Leslie A.; Taylor, Peter R.

    1988-01-01

    Potential curves for the lowest two electronic states (X 2 sigma g + and A 2 pi u) of Al2(+) were computed using complete active space SCF/multireference CI wave functions and large Gaussian basis sets. The lowest observable vertical ionization potential (to Al2(+) X 2 sigma g +) of the Al2 X 3 pi u ground state is calculated to occur around 6.1 eV, in excellent agreement with the experimental range of 6.0 to 6.42 eV obtained in recent cluster ionization studies by Cox and co-workers. The second vertical ionization potential (to Al2(+) A 2 pi u) occurs near 6.4 eV, also within the experimental range. The adiabatic IP of 5.90 eV is in good agreement with the value of 5.8 to 6.1 eV deduced by Hanley and co-workers from the difference in thresholds between collision induced dissociation processes of Al3(+). The computed IP values are somewhat larger than those deduced from branching ratios in cluster fragmentation experiments by Jarrold and co-workers. The observation of an ionization threshold below 6.42 eV is shown to be incompatible with an Al2 ground electronic state assignment of 3 sigma g -, but the separation between the two lowest states of Al2 is so small that it is likely that both are populated in the experiments, so that this does not provide unambiguous support for the recent theoretical assignment of the ground state as 3 pi u.

  4. Two-Phase (TiAl+TiCrAl) Coating Alloys for Titanium Aluminides

    NASA Technical Reports Server (NTRS)

    Brady, Michael P. (Inventor); Smialek, James L. (Inventor); Brindley, William J. (Inventor)

    1998-01-01

    A coating for protecting titanium aluminide alloys, including the TiAl gamma + Ti3Al (alpha(sub 2)) class, from oxidative attack and interstitial embrittlement at temperatures up to at least 1000 C. is disclosed. This protective coating consists essentially of titanium, aluminum. and chromium in the following approximate atomic ratio: Ti(41.5-34.5)Al(49-53)Cr(9.5-12.5)

  5. Influence of RCS on Al-3Mg and Al-3Mg-0.25Sc alloys

    NASA Astrophysics Data System (ADS)

    Bhovi, Prabhakar M.; Venkateswarlu, K.

    2016-02-01

    An influence of repetitive corrugation and straightening (RCS) was studied on Al-3Mg and Al-3Mg-0.25Sc alloys up to eight passes. Each pass consist of a corrugation and followed by straightening. This has resulted in introducing large plastic strain in sample, and thus led to formation of sub-micron grain sizes with high angle grain boundaries. These sub grain formation was eventually resulted in improved mechanical properties. The average grain size of Al-3Mg-0.25Sc alloy after 8 passes yielded to ∼0.6pm. Microhardness, strength properties were evaluated and it suggests that RCS was responsible for high hardness values as compared to the as cast samples. The microhardness values after RCS were 105 HV and 130 HV for Al-3Mg and Al-3Mg-0.25Sc alloys, respectively. Similarly, ∼ 40% improvement in tensile strength from 240 MPa to 370 MPa was observed for Al- 3Mg-0.25Sc alloy after RCS process.Al-3Mg and Al-3Mg-0.25Scalloys exhibited maximum strength of 220 MPa and 370 MPa, respectively. It is concluded that RCS process has a strong influence on Al- 3Mg and Al-3Mg-0.25Sc alloys for obtaining improved mechanical properties and grain refinement. In addition to RCS process and presence of AESc precipitates in Al-3Mg-0.25Sc alloy had a significant role in grain refinement and improved mechanical properties as compared to Al-3Mg alloy.

  6. Stabilization of itinerant (band) magnetism in FeAl by Ga substitution for Al

    NASA Astrophysics Data System (ADS)

    Papaconstantopoulos, D. A.; Mazin, I. I.; Hathaway, K. B.

    2001-06-01

    Band structure calculations of FeGa1-xAlx have been performed, to further investigate the stability of ferromagnetism in FeAl. The Stoner parameter increases by about 20% at the FeGa end. This is also confirmed by our spin-polarized calculations. We conclude that Ga substitution for Al is likely to stabilize the elusive (or illusive) ferromagnetic state in FeAl.

  7. Another Security Improvement over the Lin et al.'s E-voting Scheme

    NASA Astrophysics Data System (ADS)

    Asaar, Maryam Rajabzadeh; Mohajeri, Javad; Salmasizadeh, Mahmoud

    In 2003, Lin et al. have proposed an electronic voting scheme which can be utilized in large-scale elections, and claimed it detects double voting. But in this paper, by presenting an attack, we show that voters can successfully vote more than once without being detected. Hence, we propose a new modified scheme based on the Lin et al.'s scheme with the same efficiency to solve this weakness and analyze its security.

  8. Quantum chemical study of the reactions of Al, AlO and AlOH with H2O2

    NASA Astrophysics Data System (ADS)

    Sharipov, Alexander S.; Starik, Alexander M.

    2016-02-01

    Quantum chemical calculations with the use of hybrid density functional with perturbative second-order correlation and dispersion correction are carried out to study the reactions of Al, AlO and AlOH with the H2O2 molecule. The values of energy barriers are estimated by means of extrapolation to the basis set limit. The energetically favorable reaction pathways have been revealed during the examination of the potential energy surfaces. Complex character of the processes under study has been established. It has been found that the initial stages of the considered processes are barrierless. Appropriate rate constants for principal channels of the reactions under study have been estimated by using capture model and canonical variational theory. The Arrhenius approximations for these channels have been proposed for the temperature range T = 300-4000 K.

  9. Regulation of the Bacillus subtilis alsS, alsD, and alsR genes involved in post-exponential-phase production of acetoin.

    PubMed

    Renna, M C; Najimudin, N; Winik, L R; Zahler, S A

    1993-06-01

    Acetoin is a major extracellular product of Bacillus subtilis grown on glucose and other fermentable carbon sources. The enzymes responsible for the formation of acetoin, acetolactate synthase, and acetolactate decarboxylase are synthesized in detectable amounts only in cells that have reached stationary phase. We have cloned and sequenced the genes encoding these enzymes, alsS and alsD, as well as a gene, alsR, that regulates their expression. alsS and alsD appear to compose a single operon, while alsR is transcribed divergently from the alsSD operon. AlsR shows significant homology to the LysR family of bacterial activator proteins, and when alsR is disrupted the alsSD operon is not expressed. Transcriptional fusions to alsS and alsR revealed that AlsR is required for the transcription of the alsSD operon, which increases during stationary phase. Two mutations that cause increased expression of the alsSD operon have been isolated, cloned, and sequenced. They each change an amino acid in the AlsR protein.

  10. Effect of addition of Si on thermal and electrical properties of Al-Si-Al2O3 composites

    NASA Astrophysics Data System (ADS)

    Cao, R.; Jiang, J. X.; Wu, C.; Jiang, X. S.

    2017-06-01

    Al-5wt.%Si-Al2O3, Al-10wt.%Si-Al2O3, Al-20wt.%Si-Al2O3 composites were fabricated by powder metallurgy and in-situ reactive synthesis technology. The impact of the addition of Si on the thermal and electrical properties was tested and analysed for vary in silicon content in Al-Si-Al2O3 composites. Results show that both thermal expansion coefficient and thermal conductivity decreased as silicon content increased because Si and Al2O3 dispersed in the Al matrix uniformly to suppress the high thermal expansion of Al to a large extent as well as the interfacial thermal resistance which led to the decline in thermal conductivity. Electrical resistivity increased when silicon content was increased because low thermal expansion coefficient particles of Si and Al2O3 severely damaged the continuity of the Al matrix which hindered movement of electron in the matrix.

  11. Small Al clusters. II - Structure and binding in Al(n) (n = 2-6, 13)

    NASA Technical Reports Server (NTRS)

    Pettersson, Lars G. M.; Bauschlicher, Charles W., Jr.; Halicioglu, Timur

    1987-01-01

    The structure and stability of aluminum clusters containing up to six atoms have been studied using correlated wave functions and extended basis sets. The lowest energy structure is planar for Al4 and Al5, but three dimensional for Al6. The icosahedral, hcp, fcc, and two planar structures of Al13 were considered at the SCF level. The lowest energy structure is the icosahedron, but the planar structures are fairly low lying even in this case. A simplified description using two- and three-body interaction potentials is found to agree well with the ab initio structures and binding energies.

  12. Thermal oxidation of the intermetallic phases Al8Mo3 and AlMo3

    NASA Astrophysics Data System (ADS)

    Oster, Michael; Tapp, Joshua; Hagenow, Alexander; Möller, Angela

    2017-07-01

    The thermal oxidation reactions of the intermetallic phases Al8Mo3 and AlMo3 were investigated and analyzed by ex-situ powder-x-ray diffraction (XRD), difference thermal analysis (DTA), thermogravimetry (TGA), and infrared spectroscopy (IR). The initial oxidation reactions in air were found to yield Al2O3 and AlMo3 in the case of Al8Mo3 (Tonset =725 °C), and MoO3 as well as Al8-xMo3 (Tonset =435 °C) for the pure intermetallic phase AlMo3, respectively. Thus, both intermetallic phases are coexisting in an equilibrium within a temperature range of 300 °C under oxidizing conditions. The formation of β-Al2(MoO4)3 followed the second oxidizing process of the respective minority component at elevated temperatures. Decomposition and evaporation of the volatile MoO3 yielded α-Al2O3 as the residue at 1000 °C.

  13. The Dissociation Energies of AlH2 and AlAr

    NASA Technical Reports Server (NTRS)

    Ricca, Alessandra; Partridge, Harry; Bauschlicher, Charles W., Jr.; Visscher, Luuk; Langhoff, Stephen R. (Technical Monitor)

    1995-01-01

    The D(sub 0) values for AlH2 and AlAr are computed using the coupled cluster approach in conjunction with large basis sets. Basis set superposition and spin-orbit effects are accounted for as they are sizeable due to the small binding energy. The computed dissociation energy for AlAr is 101 /cm , which is 83% of the experimental value (122.4/ cm). Our best estimate for the H2 binding energy in AlH2 is 40 +/- 28 /cm.

  14. Synthesis of core-shell AlOOH hollow nanospheres by reacting Al nanoparticles with water

    NASA Astrophysics Data System (ADS)

    Lozhkomoev, A. S.; Glazkova, E. A.; Bakina, O. V.; Lerner, M. I.; Gotman, I.; Gutmanas, E. Y.; Kazantsev, S. O.; Psakhie, S. G.

    2016-05-01

    A novel route for the synthesis of boehmite nanospheres with a hollow core and the shell composed of highly crumpled AlOOH nanosheets by oxidizing Al nanopowder in pure water under mild processing conditions is described. The stepwise events of Al transformation into boehmite are followed by monitoring the pH in the reaction medium. A mechanism of formation of hollow AlOOH nanospheres with a well-defined shape and crystallinity is proposed which includes the hydration of the Al oxide passivation layer, local corrosion of metallic Al accompanied by hydrogen evolution, the rupture of the protective layer, the dissolution of Al from the particle interior and the deposition of AlOOH nanosheets on the outer surface. In contrast to previously reported methods of boehmite nanoparticle synthesis, the proposed method is simple, and environmentally friendly and allows the generation of hydrogen gas as a by-product. Due to their high surface area and high, slit-shaped nanoporosity, the synthesized AlOOH nanostructures hold promise for the development of more effective catalysts, adsorbents, vaccines and drug carriers.

  15. Ohmic contacts to Al-rich AlGaN heterostructures

    DOE PAGES

    Douglas, E. A.; Reza, S.; Sanchez, C.; ...

    2017-06-06

    Due to the ultra-wide bandgap of Al-rich AlGaN, up to 5.8 eV for the structures in this study, obtaining low resistance ohmic contacts is inherently difficult to achieve. A comparative study of three different fabrication schemes is presented for obtaining ohmic contacts to an Al-rich AlGaN channel. Schottky-like behavior was observed for several different planar metallization stacks (and anneal temperatures), in addition to a dry-etch recess metallization contact scheme on Al0.85Ga0.15N/Al0.66Ga0.34N. However, a dry etch recess followed by n+-GaN regrowth fabrication process is reported as a means to obtain lower contact resistivity ohmic contacts on a Al0.85Ga0.15N/Al0.66Ga0.34N heterostructure. In conclusion,more » specific contact resistivity of 5×10-3 Ω cm2 was achieved after annealing Ti/Al/Ni/Au metallization.« less

  16. Small Al clusters. II - Structure and binding in Al(n) (n = 2-6, 13)

    NASA Technical Reports Server (NTRS)

    Pettersson, Lars G. M.; Bauschlicher, Charles W., Jr.; Halicioglu, Timur

    1987-01-01

    The structure and stability of aluminum clusters containing up to six atoms have been studied using correlated wave functions and extended basis sets. The lowest energy structure is planar for Al4 and Al5, but three dimensional for Al6. The icosahedral, hcp, fcc, and two planar structures of Al13 were considered at the SCF level. The lowest energy structure is the icosahedron, but the planar structures are fairly low lying even in this case. A simplified description using two- and three-body interaction potentials is found to agree well with the ab initio structures and binding energies.

  17. Study on Mg/Al Weld Seam Based on Zn–Mg–Al Ternary Alloy

    PubMed Central

    Liu, Liming; Liu, Fei; Zhu, Meili

    2014-01-01

    Based on the idea of alloying welding seams, a series of Zn–xAl filler metals was calculated and designed for joining Mg/Al dissimilar metals by gas tungsten arc (GTA) welding. An infrared thermography system was used to measure the temperature of the welding pool during the welding process to investigate the solidification process. It was found that the mechanical properties of the welded joints were improved with the increasing of the Al content in the Zn–xAl filler metals, and when Zn–30Al was used as the filler metal, the ultimate tensile strength could reach a maximum of 120 MPa. The reason for the average tensile strength of the joint increasing was that the weak zone of the joint using Zn–30Al filler metal was generated primarily by α-Al instead of MgZn2. When Zn–40Al was used as the filler metal, a new transition zone, about 20 μm-wide, appeared in the edge of the fusion zone near the Mg base metal. Due to the transition zones consisting of MgZn2- and Al-based solid solution, the mechanical property of the joints was deteriorated. PMID:28788508

  18. AlN/IDT/AlN/Sapphire SAW Heterostructure for High-Temperature Applications.

    PubMed

    Legrani, Ouarda; Aubert, Thierry; Elmazria, Omar; Bartasyte, Ausrine; Nicolay, Pascal; Talbi, Abdelkrim; Boulet, Pascal; Ghanbaja, Jaafar; Mangin, Denis

    2016-06-01

    Recent studies have evidenced that Pt/AlN/Sapphire surface acoustic wave (SAW) devices are promising for high-temperature high-frequency applications. However, they cannot be used above 700°C in air atmosphere as the Pt interdigital transducers (IDTs) agglomerate and the AlN layer oxidizes in such conditions. In this paper, we explore the possibility to use an AlN protective overlayer to concurrently hinder these phenomena. To do so, AlN/IDT/AlN/Sapphire heterostructures undergo successive annealing steps from 800°C to 1000°C in air atmosphere. The impact of each step on the morphology, microstructure, and phase composition of AlN and Pt films is evaluated using optical microscopy, scanning and transmission electron microscopy (SEM and TEM), X-ray diffraction (XRD), and secondary ion mass spectroscopy (SIMS). Finally, acoustical performance at room temperature of both protected and unprotected SAW devices are compared, as well as the effects of annealing on these performance. These investigations show that the use of an overlayer is one possible solution to strongly hinder the Pt IDTs agglomeration up to 1000°C. Moreover, AlN/IDT/AlN/Sapphire SAW heterostructures show promising performances in terms of stability up to 800°C. At higher temperatures, the oxidation of AlN is more intense and makes it inappropriate to be used as a protective layer.

  19. HYDROGEN ADSORPTION ON β-TiAl (001) AND Ni/TiAl (001) SURFACES

    NASA Astrophysics Data System (ADS)

    Mubarak, A. A. Karim; Alelaimi, Mahmoud

    2014-04-01

    In this paper, we present first principles calculations of the energetic, electronic and magnetic properties of the variant termination of TiAl (001) and Ni/TiAl (001) surfaces with and without hydrogen atoms. The calculations have been performed within the density functional theory using full-potential linearized augmented plane wave method. The generalized gradient approximation (GGA) is utilized as the exchange-correlation energy. The octahedral site is the stable absorption site of H atom in the β-TiAl system. This absorption reduces the cohesive energy of β-TiAl system due to increase in the lattice constant. The surface energy for both TiAl (001) terminations is calculated. The stable adsorption site of H atoms on the variant termination of TiAl (001) surface is performed. The adsorption energy of hydrogen on Ti is more energetic than that on Al. The adsorption of H atom on both terminations of H/Ni/TiAl (001) is more preferable at the bridge site. The adsorption energies are enhanced on Ni atom due to the contraction between d-Ni bands and TiAl substrate band.

  20. The Dissociation Energies of AlH2 and AlAr

    NASA Technical Reports Server (NTRS)

    Ricca, Alessandra; Partridge, Harry; Bauschlicher, Charles W., Jr.; Visscher, Luuk; Langhoff, Stephen R. (Technical Monitor)

    1995-01-01

    The D(sub 0) values for AlH2 and AlAr are computed using the coupled cluster approach in conjunction with large basis sets. Basis set superposition and spin-orbit effects are accounted for as they are sizeable due to the small binding energy. The computed dissociation energy for AlAr is 101 /cm , which is 83% of the experimental value (122.4/ cm). Our best estimate for the H2 binding energy in AlH2 is 40 +/- 28 /cm.

  1. High temperature deformation of NiAl and CoAl

    NASA Technical Reports Server (NTRS)

    Nix, W. D.

    1982-01-01

    The high temperature mechanical properties of the aluminides are reviewed with respect to their potential as high temperature structural materials. It is shown that NiAl and CoAl are substantially stronger than the pure metals Ni and Co at high temperatures and approach the strength of some superalloys, particularly when those superalloys are tested in "weak" directions. The factors that limit and control the high temperature strengths of NiAl and CoAl are examined to provide a basis for the development of intermetallic alloys of this type.

  2. Possible Involvement of Al-Induced Electrical Signals in Al Tolerance in Wheat.

    PubMed Central

    Papernik, L. A.; Kochian, L. V.

    1997-01-01

    The relationship between Al-induced depolarization of root-cell transmembrane electrical potentials (Em) and Al tolerance in wheat (Triticum aestivum L.) was investigated. Al exposure induced depolarizations of Em in the Al-tolerant wheat cultivars Atlas and ET3, but not in the Al-sensitive wheat cultivars Scout and ES3. The depolarizations of Em occured in root cap cells and as far back as 10 mm from the root tip. The depolarization was specific to Al3+; no depolarization was observed when roots were exposed to the rhizotoxic trivalent cation La3+. The Al-induced depolarization occurred in the presence of anion-channel antagonists that blocked the release of malate, indicating that the depolarization is not due to the electrogenic efflux of malate2-. K+-induced depolarizations in the root cap were of the same magnitude as Al-induced depolarizations, but did not trigger malate release, indicating that Al-induced depolarization of root cap cell membrane potentials is probably linked to, but is not sufficient to trigger, malate release. PMID:12223834

  3. Al Studies with INTEGRAL's Spectrometer SPI

    NASA Astrophysics Data System (ADS)

    Diehl, R.; Kretschmer, K.; Lichti, G.; Schönfelder, V.; Strong, A. W.; von Kienlin, A.; Knödlseder, J.; Jean, P.; Lonjou, V.; Weidenspointner, G.; Roques, J.-P.; Vedrenne, G.; Schanne, S.; Mowlavi, N.; Winkler, C.; Wunderer, C.

    2004-10-01

    26 Al radioactivity traces recent nucleosynthesis throughout the Galaxy, and is known to be produced in massive stars and novae. The map from its decay gamma-ray line suggests massive stars to dominate, but high-resolution line spectroscopy is expected to supplement imaging of 26 Al source regions and thus to help decide about the 26 Al injection process and interstellar environment, hence about the specific massive-star subgroup and phase which produces interstellar 26 Al. The INTEGRAL Spectrometer SPI has observed Galactic 26 Al radioactivity in its 1809 keV gamma-ray line during its first inner-Galaxy survey. Instrumental background lines make analysis difficult; yet, a clear signal from the inner Galaxy agrees with expectations. In particular, SPI has constrained the line width to exclude previously- reported line broadenings corresponding to velocities >500 km s-1 . The signal-to-background ratio of percent implies that detector response and background modeling need to be fine-tuned to eventually enable line shape deconvolution in order to extract source location information along the line of sight. Key words: nucleosynthesis; supernovae; novae; massive stars; instruments: gamma-ray telescopes.

  4. Survey and alignment at the ALS

    SciTech Connect

    Krebs, G.F.; Lauritzen, T.; Thur, W.

    1995-11-01

    This paper describes survey and alignment at the Lawrence Berkeley National Laboratory`s Advanced Light Source (ALS) accelerators from 1993 to 1995. The ALS is a 1.0 - 1.9 GeV electron accelerator producing extremely bright synchrotron light in the UV and soft-X-ray wavelengths. At the ALS, electrons are accelerated in a LINAC to 50 MeV, injected into a booster ring for further acceleration and finally injected into the storage ring. This is shown schematically in Figure 1. The storage ring, some 200 m in circumference, has been run with electron currents above 400 mA with lifetimes as high as 24 hours. The ALS is a third generation light source and requires for efficient storage ring operation, magnets aligned to within 150 mm of their ideal position. To accomplish this a network of monuments was established and their positions measured with respect to one another. The data was reduced using GEONET`` and STAR*NET`` software. Using the monuments as reference points, magnet positions were measured and alignment confirmed using the Kem Electronic Coordinate Determination System (ECDS``). A number of other papers dealing with survey and alignment (S&A) at the ALS have been written that may further elucidate some details of the methods and systems described in this paper.

  5. Coating of a layer of Au on Al13 : The findings of icosahedral Al@Al12Au20- and Al12Au202- fullerenes using ab initio pseudopotential calculations

    NASA Astrophysics Data System (ADS)

    Kumar, Vijay

    2009-02-01

    We report results of ab initio pseudopotential calculations on the nanocoating of gold on an icosahedral Al13 cluster and the findings of icosahedrally symmetric endohedral Al@Al12Au20- and empty cage Al12Au202- compound fullerenes formed of metal atoms. Twelve Al atoms cap the pentagonal faces of a dodecahedral Au20 cage in which each Au atom has three Al atoms and three Au atoms as nearest neighbors. Mixing of Al13 and Au20 magic clusters leads to a large heat of formation of 0.55 eV/atom and high stability of the Al@Al12Au20 compound fullerene. The binding energies of Al12Au20 and Al@Al12Au20 are 3.017 and 3.007 eV/atom, respectively, which are much larger than 2.457 eV/atom for Au32 fullerene, leading to the possibility of their high abundance.

  6. 78 FR 76054 - Establishment of Class E Airspace; Chatom, AL

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-16

    ..., Georgia 30320; telephone (404) 305-6364. ] SUPPLEMENTARY INFORMATION: History On September 4, 2013, the... Above the Surface of the Earth. * * * * * ASO AL E5 Chatom, AL Roy Wilcox Airport, AL (Lat. 31 27'06''...

  7. Different Mechanisms of Four Aluminum (Al)-Resistant Transgenes for Al Toxicity in Arabidopsis1

    PubMed Central

    Ezaki, Bunichi; Katsuhara, Maki; Kawamura, Masako; Matsumoto, Hideaki

    2001-01-01

    We have characterized the mechanism of action of four transgenes (AtBCB [Arabidopsis blue copper-binding protein], parB [tobacco {Nicotiana tabacum} glutathione S-transferase], NtPox [tobacco peroxidase], and NtGDI1 [tobacco GDP dissociation inhibitor]) that independently Al resistance on transgenic Arabidopsis. All four transgenic lines showed lower deposition of callose after Al treatment than the Landsberg erecta ecotype of Arabidopsis, confirming that the four genes function to ameliorate Al toxicity. Influx and efflux experiments of Al ions suggested that the AtBCB gene may suppress Al absorption, whereas expression of the NtGDI1 gene promotes a release of Al in the root tip region of Arabidopsis. The total enzyme activities of glutathione S-transferases or peroxidases in transgenic lines carrying either the parB or NtPox genes were significantly higher than in the Landsberg erecta ecotype of Arabidopsis, and these enzyme activities were maintained at higher levels during Al stress. Furthermore, lipid peroxidation caused by Al stress was repressed in these two transgenic lines, suggesting that overexpression of these two genes diminishes oxidative damage caused by Al stress. Al-treated roots of transgenic plants were also stained by 4′,6-diamino-2-phenylindole to monitor cell death caused by Al toxicity. The result suggested that cell death is repressed in the NtPox line. Analysis of F1 hybrids between the four transgenic lines suggests that more resistant transgenic plants can be constructed by combinations of these four genes. PMID:11706174

  8. Blue electroluminescence from AlN nanowhiskers

    NASA Astrophysics Data System (ADS)

    Vokhmintsev, A. S.; Weinstein, I. A.; Chaikin, D. V.; Fedorov, M. D.; Afonin, Yu. D.

    2015-04-01

    AlN nanowhiskers with an average diameter of 68 nm, for which a chemical analysis showed an Al: N ratio of about 1: 0.8 and a high content of oxygen and carbon impurities, have been synthesized. The electroluminescent properties of the nanostructures have been studied at room temperature in the spectral range of 4.0-1.77 eV (310-700 nm) at varied voltage (75-200 V) and frequency (0.5-10.0 kHz) of the exciting harmonic signal. It is shown that the electroluminescence recorded in the blue spectral range is constituted by bands peaked at E max ≈ 2.53 and 2.75 eV and half-widths ω ≈ 0.39 and 0.30 eV, respectively, which may be associated with electron-optical transitions involving impurity-vacancy centers in the anion and cation sublattices of AlN.

  9. Boron strengthening in FeAl

    SciTech Connect

    Baker, I.; Li, X.; Xiao, H.; Klein, O.; Nelson, C.; Carleton, R.L.; George, E.P.

    1998-11-01

    The effect of boron on the strength of B2-structured FeAl is considered as a function of composition, grain size and temperature. Boron does not affect the concentrations of antisite atoms or vacancies present, with the former increasing and the latter decreasing with increasing deviation from the stoichiometric composition. When vacancies are absent, the strength increase per at. % B per unit lattice strain, {Delta}{sigma}/({Delta}c x {epsilon}) increases with increasing aluminum concentration, but when vacancies are present (>45 at. % Al), {Delta}{sigma}/({Delta}c x {epsilon}) decreases again. Boron increases grain size strengthening in FeAl. B strengthening is roughly independent of temperature up to the yield strength peak but above the point, when diffusion-assisted deformation occurs, boron strengthening increases dramatically.

  10. Unraveling hypothyroidism in AL amyloidosis: Authors' reply.

    PubMed

    Muchtar, Eli; Gertz, Morie

    2017-09-01

    We read with interest the insightful comments by Benvenga and Guarneri (1) on our recently published paper which assessed the high prevalence of hypothyroidism among patients with immunoglobulin light chain (AL) amyloidosis.(2) The paper was the first research paper to address this topic in AL amyloidosis, so we appreciate any insights that can expand the understanding of this complex disease. Amyloidosis is an extremely heterogeneous disorder, and therefore various pathogenic mechanisms may play a role in organ dysfunction. We therefore acknowledge that various causes can lead to the high prevalence (approximately 1 out of 5 patients) of hypothyroidism in Al amyloidosis. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

  11. Vínculos observacionais para o processo-S em estrelas gigantes de Bário

    NASA Astrophysics Data System (ADS)

    Smiljanic, R. H. S.; Porto de Mello, G. F.; da Silva, L.

    2003-08-01

    Estrelas de bário são gigantes vermelhas de tipo GK que apresentam excessos atmosféricos dos elementos do processo-s. Tais excessos são esperados em estrelas na fase de pulsos térmicos do AGB (TP-AGB). As estrelas de bário são, no entanto, menos massivas e menos luminosas que as estrelas do AGB, assim, não poderiam ter se auto-enriquecido. Seu enriquecimento teria origem em uma estrela companheira, inicialmente mais massiva, que evolui pelo TP-AGB, se auto-enriquece com os elementos do processo-s e transfere material contaminado para a atmosfera da atual estrela de bário. A companheira evolui então para anã branca deixando de ser observada diretamente. As estrelas de bário são, portanto, úteis como testes observacionais para teorias de nucleossíntese pelo processo-s, convecção e perda de massa. Análises detalhadas de abundância com dados de alta qualidade para estes objetos são ainda escassas na literatura. Neste trabalho construímos modelos de atmosferas e, procedendo a uma análise diferencial, determinamos parâmetros atmosféricos e evolutivos de uma amostra de dez gigantes de bário e quatro normais. Determinamos seus padrões de abundância para Na, Mg, Al, Si, Ca, Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Sr, Y, Zr, Ba, La, Ce, Nd, Sm, Eu e Gd, concluindo que algumas estrelas classificadas na literatura como gigantes de bário são na verdade gigantes normais. Comparamos dois padrões médios de abundância, para estrelas com grandes excessos e estrelas com excessos moderados, com modelos teóricos de enriquecimento pelo processo-s. Os dois grupos de estrelas são ajustados pelos mesmos parâmetros de exposição de nêutrons. Tal resultado sugere que a ocorrência do fenômeno de bário com diferentes intensidades não se deve a diferentes exposições de nêutrons. Discutimos ainda efeitos nucleossintéticos, ligados ao processo-s, sugeridos na literatura para os elementos Cu, Mn, V e Sc.

  12. Para-methylstyrene from toluene and acetaldehyde

    SciTech Connect

    Innes, R.A.; Occelli, M.L.

    1984-08-01

    High yields of para-methylstyrene (PMS) were obtained in this study by coupling toluene and acetaldehyde then cracking the resultant 1,1-ditolylethane (DTE) to give equimolar amounts of PMS and toluene. In the first step, a total DTE and ''trimer'' yield of 98% on toluene and 93% on acetaldehyde was obtained using 98% sulfuric acid as catalyst at 5-10/sup 0/C. In the second step, a choline chloride-offretite cracked DTE with 84.0% conversion and 91% selectivity to PMS and toluene. Additional PMS can be obtained by cracking the by-product ''trimer'' formed by coupling DTE and toluene with acetaldehyde. Zeolite Rho was as active but yielded less PMS (86%) and produced more para-ethyltoluene (PET), an undesirable by-product.

  13. [Al-Biruni--a universal scientist].

    PubMed

    Kujundzić, E; Masić, I

    1999-01-01

    Al-Biruni's was of Persian descent. He was born in Horesmiya and had studied mathematics, history and medicine. Acquiring knowledge from these sciences, he wrote an outstanding work on chronology of several nations and devoted it to Ziyarit ruler Kabus. He made a chronological overview of calendars from many nations, including Persians, Greeks, Egyptians, Jews, Melkitian and Nestorian Christians, Sabeyaans as well as the old Arabs. Data presented in the work, according to the later authors, were taken from very reliable sources. He was contemporary of Ibn-Sina, and thanks to their friendship, they have discussed very much miscellaneous topics. He belonged to the group of scholars, taken by Gaznevian Soultan Mahmud to a long journey to India. Afterwards Al-Biruni wrote and published detailed work "Description of India"--a work on cultural history of India. Due to excellent abilities of Al-Biruni as a philosopher and scholar, there are still significant and reliable notes about buddhistic philosophy, structure of castes and Brahmans' life style. In this Al-Biruni's masterpiece, there are many comparative analysis of Suffism and certain Indian philosophical methods. Al-Biruni's most important work is "Pharmacopoeia"--"Kitab al-saydala", which brilliantly describes all medicaments. This work has been published in many languages. He also wrote few works on astronomy and astrology. In those works he has explained some astrological events through scientific approach in a such peculiar way that nobody has ever explained before. He was also interested in sciences like geology, mineralology, geography, mathematics, psychology and many others.

  14. A Comment on Eerland et al. (2016).

    PubMed

    Hart, William

    2016-03-01

    People imagine criminal behavior in greater detail and ascribe more blame to criminals when a description of a crime is written using the imperfective verb aspect (Hart & Albarracín, 2011, Experiment 3). An initiative to reproduce these findings conducted by Eerland et al. (2016) yielded a lack of replication. Eerland et al. have suggested that the original effect was likely driven by a Type I error produced by methodological aspects of the experiment, including low sample size. Recent conceptual replications of Hart and Albarracín's effect (Sherrill, Eerland, Zwaan, & Magliano, 2015), however, might imply the effect could be contingent on sample characteristics.

  15. Vibrations on Al surfaces covered by sodium

    NASA Astrophysics Data System (ADS)

    Rusina, G. G.; Eremeev, S. V.; Borisova, S. D.; Sklyadneva, I. Yu.; Chulkov, E. V.

    2006-09-01

    In this paper we present the results of a comparative study of vibrational and structural properties of the ordered (√{3}×√{3})R30∘ and c(2 × 2) phases formed by Na adatoms at room temperature on the Al(1 1 1) and Al(1 0 0) surfaces, respectively. The surface relaxation, surface phonon dispersion, and polarization of vibrational modes are calculated using the embedded-atom method. Our calculated structural parameters are in agreement with experimental and ab initio results. The obtained vibrational frequencies compare fairly well with available experimental data.

  16. Complementary and Alternative Therapies in ALS

    PubMed Central

    Bedlack, Richard S.; Joyce, Nanette; Carter, Gregory T.; Pagononi, Sabrina; Karam, Chafic

    2015-01-01

    Synopsis Given the severity of their illness and lack of effective disease modifying agents, it is not surprising that most patients with ALS consider trying complementary and alternative therapies. Some of the most commonly considered alternative therapies include special diets, nutritional supplements, cannabis, acupuncture, chelation and energy healing. This chapter reviews these in detail. We also describe 3 models by which physicians may frame discussions about alternative therapies: paternalism, autonomy and shared decision making. Finally, we review a program called ALSUntangled which using shared shared decision making to review alternative therapies for ALS. PMID:26515629

  17. Al Qaeda: A Modern Day Lernaean Hydra

    DTIC Science & Technology

    2010-03-01

    St ra te gy R es ea rc h Pr oj ec t AL QAEDA: A MODERN DAY LERNAEAN HYDRA BY MR. MARK A. D’AMATO Department of Army Civilian...strategist, Abu Naji , estimated that 500,000 mujahideen would be necessary “for our long battle and to achieve the results we want.”50 This number...Riedel, The Search for Al Qaeda, Its Leadership, Ideology, and Future, 101. 40 Anthony H . Cordesman, “A Tenuous Case for Strategic Patience in Iraq

  18. Al Qaeda Refining a Failing Strategy

    DTIC Science & Technology

    2008-01-01

    ndupress .ndu.edu issue 51, 4th quarter 2008 / JFQ 117 Al Qaeda Refining a Failing Strategy By M a r t i n J . H a r t Martin J. Hart is an...weak efforts to organize Damage to Pentagon after September 11 attack 1s t C om ba t C am er a S qu ad ro n (C ed ric H . R ud is ill) Report...defeatism.7 Al Qaeda believes such violence can radicalize the Muslim population in a way that simple proselytizing cannot. Naji , for example, calls

  19. The Future of Al Qa’ida

    DTIC Science & Technology

    2011-05-24

    commissions and panels; and private review and oversight bodies. C O R P O R A T I O N For More Information Visit RAND at www.rand.org Explore RAND...affiliated groups and its leadership. A range of senior officials, including Saif al-Adel and Abu Miqad al-Masri, continue to play key roles. Finally, there...20 30 40 50 60 70 2003 2005 2006 2007 2008 2009 2010 Turkey Egypt Jordan Lebanon Indonesia Pakistan Pe rc te nt ag e  of   R es po nd en ts  w it h  Co

  20. Distribution and size of lava shields on the Al Haruj al Aswad and the Al Haruj al Abyad Volcanic Systems, Central Libya

    NASA Astrophysics Data System (ADS)

    Elshaafi, Abdelsalam; Gudmundsson, Agust

    2017-05-01

    The Al Haruj Volcanic Province (AHVP) consists of two distinct volcanic systems. In the north is the system of Al Haruj al Aswad, covering an area of 34,200 km2, while in the south the system of Al Haruj al Abyad, covering an area of 7,850 km2. The systems have produced some 432 monogenetic volcanoes, primarily scoria (cinder) cones, lava shields, and maars. The density distribution of the volcanoes in each system, plotted as eruption points or sites, has a roughly elliptical surface expression, suggesting similar plan-view geometry of the magma sources, here suggested as deep-seated reservoirs. More specifically, the Al Haruj al Aswad magma reservoir has major and minor axes of 210 km and 119 km, respectively, and an area of 19,176 km2, the corresponding figures for the Haruj al Abyad reservoir being 108 km and 74 km, for the axes, and 6209 km2 for the area. We measured 55 lava shields on the AHVP. They are mostly restricted to the northern and southern parts of AHVP and date from late Miocene to (at least) the end of Pleistocene, while some may have been active into Holocene. In fact, although primarily monogenetic, some of the lava shields show evidence of (possibly Holocene) fissure eruptions in the summit parts. The early lava shields tend to be located at the edges of volcanic systems and with greater volumes than later (more central) shields. The average lava shield basal diameter is 4.5 km and height 63 m. There is strong linear correlation between lava shield volume and basal area, the coefficient of determination (R2) being about 0.75. When 22 Holocene Icelandic lava shields are added to the dataset, for comparison, the correlation between volume and basal area becomes R2 = 0.95. Numerical models suggest that the local stress fields favoured rupture and dyke injection at the margins of the source reservoirs during late Miocene - early Pliocene, in agreement with the distribution of the early, large-volume shields.

  1. Electronic circuits having NiAl and Ni.sub.3 Al substrates

    DOEpatents

    Deevi, Seetharama C.; Sikka, Vinod K.

    1999-01-01

    An electronic circuit component having improved mechanical properties and thermal conductivity comprises NiAl and/or Ni.sub.3 Al, upon which an alumina layer is formed prior to applying the conductive elements. Additional layers of copper-aluminum alloy or copper further improve mechanical strength and thermal conductivity.

  2. An Alternative Perspective on von Winterfeldt et al.'s (1997) Test of Consequence Monotonicity

    ERIC Educational Resources Information Center

    Ho, Moon-Ho R.; Regenwetter, Michel; Niederee, Reinhard; Heyer, Dieter

    2005-01-01

    D. von Winterfeldt, N.-K. Chung, R. D. Luce, and Y. Cho (see record 1997-03378-008) provided several tests for consequence monotonicity of choice or judgment, using certainty equivalents of gambles. The authors reaxiomatized consequence monotonicity in a probabilistic framework and reanalyzed von Winterfeldt et al.'s main experiment via a…

  3. Transport mechanisms of leakage current in Al2O3/InAlAs MOS capacitors

    NASA Astrophysics Data System (ADS)

    Jin, Chengji; Lu, Hongliang; Zhang, Yimen; Zhang, Yuming; Guan, He; Wu, Lifan; Lu, Bin; Liu, Chen

    2016-09-01

    An Al2O3 layer is inserted between the InAlAs layer and the metal gate in InAs/AlSb HEMTs to suppress the leakage current. The transport mechanisms of leakage current in Al2O3/InAlAs metal-oxide-semiconductor (MOS) capacitors at both positive and negative biases at different temperatures ranging from 10 °C to 70 °C are investigated. For positive bias, the leakage current is dominated by Schottky emission. Based on the fitted straight lines, the relative dielectric constant of Al2O3 and the barrier height between Al2O3 and InAlAs are extracted. However, for negative bias, the leakage current is dominated by Frenkel-Poole (F-P) emission and the depth of the trap energy level from the conduction band (ϕt) is extracted. Furthermore, authors explain the reason why the dominating mechanisms at positive and negative biases are different.

  4. Directional Solidification and Mechanical Properties of NiAl-NiAlTa Alloys

    NASA Technical Reports Server (NTRS)

    Johnson, D. R.; Chen, X. F.; Oliver, B. F.; Noebe, R. D.; Whittenberger, J. D.

    1995-01-01

    Directional solidification of eutectic alloys is a promising technique for producing in-situ composite materials exhibiting a balance of properties. Consequently, the microstructure, creep strength and fracture toughness of directionally solidified NiAl-NiAlTa alloys were investigated. Directional solidification was performed by containerless processing techniques to minimize alloy contamination. The eutectic composition was found to be NiAl-15.5 at% Ta and well-aligned microstructures were produced at this composition. A near-eutectic alloy of NiAl-14.5Ta was also investigated. Directional solidification of the near-eutectic composition resulted in microstructures consisting of NiAl dendrites surrounded by aligned eutectic regions. The off-eutectic alloy exhibited promising compressive creep strengths compared to other NiAl-based intermetallics, while preliminary testing indicated that the eutectic alloy was competitive with Ni-base single crystal superalloys. The room temperature toughness of these two-phase alloys was similar to that of polycrystalline NiAl even with the presence of the brittle Laves phase NiAlTa.

  5. Draft Genome Sequences of the Aerobic Strains Lactobacillus gasseri AL3 and AL5

    PubMed Central

    Maresca, Diamante; De Filippis, Francesca; de Vos, Willem M.

    2017-01-01

    ABSTRACT Adaptation to the aerobic environment has been investigated in heterofermentative lactobacilli, while data on how homofermentative lactobacilli adapt to oxygen are limited. We report here the draft genome sequences of the aerobic strains Lactobacillus gasseri AL3 and AL5 that allow an in-depth investigation of the genes involved in oxidative metabolism and the stress response. PMID:28473372

  6. Heterogeneity of Mg Isotopes and Variable ^26Al/^27Al Ratio in FUN CAIs

    NASA Astrophysics Data System (ADS)

    Park, C.; Nagashima, K.; Hutcheon, I. D.; Wasserburg, G. J.; Papanastassiou, D. A.; Davis, A. M.; Huss, G. R.; Krot, A. N.

    2013-09-01

    We report high-precision Mg-isotope data of individual minerals from the Axtell 2271, BG82DH8, EK1-4-1, C1, TE, and CG14 FUN CAIs, which shows variations in both Mg-isotope ratio and ^26Al/^27Al ratio.

  7. Fabrication and Characterization of AL-AL4C3 Nanocomposite by Mechanical Alloying

    NASA Astrophysics Data System (ADS)

    Mohammad Sharifi, E.; Enayati, M. H.; Karimzadeh, F.

    Aluminum carbide (Al4C3) seems to be an ideal reinforcement for producing aluminum matrix composites. Al4C3 has high hardness and shear strength as well as a high melting point. The dispersion of Al4C3 particles in the matrix produces a pinning effect that reduces aluminum grain growth, which improves the mechanical properties. In this study, aluminum powders were mixed with 4.5 wt.% graphite and mechanically alloyed using a high-energy ball mill in order to produce Al-Al4C3 nanocomposite. The structural evaluation of powder particles after different milling times was studied by X-ray diffractometry, scanning electron microscopy and microhardness measurements. The aluminum crystallite size estimated with broadening of XRD peaks by Williamson-Hall formula. XRD results suggested that the grain size of aluminum decreased to nanometer range (30 nm) during ball milling. No Al4C3 formed during the mechanical alloying process. Milled powders were then annealed at 300-600 °C for 1 h under argon atmosphere. Annealing at temperatures higher than 300 °C led to formation of Al4C3 phase which increased as annealing temperature increased. Aluminum grain size remained in nanometer range after annealing process. The microhardness of powder particles increased after annealing. Both effects are due to the formation of nanosized Al4C3 particles.

  8. An Alternative Perspective on von Winterfeldt et al.'s (1997) Test of Consequence Monotonicity

    ERIC Educational Resources Information Center

    Ho, Moon-Ho R.; Regenwetter, Michel; Niederee, Reinhard; Heyer, Dieter

    2005-01-01

    D. von Winterfeldt, N.-K. Chung, R. D. Luce, and Y. Cho (see record 1997-03378-008) provided several tests for consequence monotonicity of choice or judgment, using certainty equivalents of gambles. The authors reaxiomatized consequence monotonicity in a probabilistic framework and reanalyzed von Winterfeldt et al.'s main experiment via a…

  9. The Genyornis Egg: Response to Miller et al.'s commentary on Grellet-Tinner et al., 2016

    NASA Astrophysics Data System (ADS)

    Grellet-Tinner, Gerald; Spooner, Nigel A.; Handley, Warren D.; Worthy, Trevor H.

    2017-04-01

    Williams (1981) and Williams and Rich (1991) attributed Australian Quaternary fossil eggshell that differed from that of emu Dromaius novaehollandiae to the extinct bird Genyornis newtoni without any osteological or embryonic support. Such association by proximity or abundance mirrors the case of the mistaken association of oviraptor eggs to Protoceratops in the 1920's by Andrews (Grellet-Tinner and Makovicky, 2006). No other candidate species was considered, and this attribution has been unchallenged and followed by everyone thereafter. Much research has been done on this Australian eggshell, with one result being that the extinction of the parent of this eggshell is the most well documented for a taxon in Australia (e.g., Miller et al., 1999, 2005). Grellet-Tinner et al. (2016) raised several problems with the identity of the eggshell Williams (1981) attributed to Genyornis newtoni and suggested that extinct megapodes of the genus Progura were the more likely layer of this eggshell type, therein referred to as ;putative Genyornis oological material; (PGOM). Miller et al. (2017) challenged our hypothesis stating that ;Based on the dimensions of the reconstructed Spooner Egg,Grellet-Tinner et al. (2016)argue that PGOM is too small for a bird with the body mass estimated for Genyornis (168-275 kg) … …[and] …. None of the additional PGOM observations reported byGrellet-Tinner et al. (2016)are inconsistent with a Genyornis parent;. Here we take the opportunity to respond to their critique, the basis of which resolves into a few points, which we address in turn.

  10. Electronic Spectroscopy of AlArn Clusters: Evidence for Surface Binding of Al Atoms

    NASA Astrophysics Data System (ADS)

    Okumura, Mitchio; Spotts, James M.; Wong, Chi-Kin

    1997-04-01

    Solvent-induced-frequency shifts and splittings of the 3p arrow 3d transition of Al atoms in Al(Ar)n clusters were studied to investigate the site occupied by the Al atom in these clusters. The electronic spectra were recorded near 300 nm for several sizes in the range n = 1 to 60 by resonant two-photon photoionization spectroscopy. The observed bands differ significantly from UV absorption spectra of Al atoms in Ar matrices, and the variations in splittings and shifts as a function of cluster size do not converge on the matrix limit. These results are interpreted with a model in which the Al atom is bound to the surface of an Arn cluster rather than solvated within the cluster interior.

  11. Al/sub 2/O/sub 3/ adherence on CoCrAl alloys

    SciTech Connect

    Kingsley, L.M.

    1980-04-01

    Adherence of protective oxides on NiCrAl and CoCrAl superalloys has been promoted by a dispersion of a highly oxygen reactive element or its oxide being produced within the protection system. Two aspects of this subject are investigated here: the use of Al/sub 2/O/sub 3/ as both the dispersion and protective oxide; and the production of an HfO/sub 2/ dispersion while simultaneously aluminizing the alloy. It was found that an Al/sub 2/O/sub 3/ dispersion will act to promote the adherence of an external scale of Al/sub 2/O/sub 3/ to a degree comparable to previously tested dispersions and an HfO/sub 2/ dispersion comparable to that produced by a Rhines pack treatment is produced during aluminization.

  12. 1400 and 1500 K Compressive Creep Properties of an NiAl/AlN Composite

    NASA Technical Reports Server (NTRS)

    Whittenberger, J. D.; Arzt, Eduard; Luton, Michael J.

    1992-01-01

    Compressive creep properties of an NiAl/AlN(p) composite produced by a reaction milling process were investigated at 1400 and 1500 K and at slow strain rates, to investigate the relative strength of this composite at high temperatures, and to determine if the consolidation technique affects the 1400 K creep properties. Results indicate that the stress exponent of the NiAl/AlN(p) composite was similar to that for unreinforced NiAl. However, the activation energy for the composite was found to be more than twice that measured in the unreinforced matrix. Oxidation did not affect the composite at 1400 K, but a significant attack was observed in a sample subjected to fast deformation at 1500 K.

  13. Temperature dependence of the activity of Al in dilute Ni(Al) solid solutions

    SciTech Connect

    Jiang Yong; Smith, J. R.; Evans, A. G.

    2006-12-01

    Activities of dilute Al solid solutions in Ni are determined from a first-principles approach. Both thermal lattice vibration and electronic contributions to free energies are considered and compared. Vibrational contributions tend to dominate the temperature dependencies of the free energies, though electron thermal effects are significant. Calculations show opposing temperature trends for the formation enthalpies and entropies, leading to a partial cancellation of their role in the overall energetics. Nevertheless, their remaining temperature effects are strong. Over the temperature range, 400 KAl activity coefficient varies by 15 orders of magnitude, due to the relative strength of Al-Ni and Al-Al bonds. The Ni activity coefficient only varies less than 4% over the same range. Calculational results compare well with available experimental data. The thermodynamic principles elucidated from the calculations are used to provide a fundamental interpretation.

  14. Fundamental Influence of C on Adhesion of the Al2O3/Al Interface

    NASA Astrophysics Data System (ADS)

    Wang, Xiao-Gang; Smith, John R.; Evans, Anthony

    2002-12-01

    Our first-principles computations indicate that the clean Al2O3/Al interface is relatively weak—weaker than bulk Al. Fracture experiments reveal that the interface is relatively strong with observed failure in bulk Al, however. This paradox is resolved via doping effects of the common impurity C. We have found that only 1/3 of a monolayer of carbon segregated to the interface can increase the work of separation by a factor of 3. The resulting strong interface is consistent with fracture experiments. It arises due to void formation in the interface, which provides low-strain sites for the carbon to segregate to. The degree of void formation is consistent with the relatively high heat of oxide formation of Al.

  15. Grain refinement of 7075Al alloy microstructures by inoculation with Al-Ti-B master alloy

    NASA Astrophysics Data System (ADS)

    Hotea, V.; Juhasz, J.; Cadar, F.

    2017-05-01

    This paper aims to bring some clarification on grain refinement and modification of high strength alloys used in aerospace technique. In this work it was taken into account 7075 Al alloy, and the melt treatment was carried out by placing in the form of master alloy wire ternary AlTiB the casting trough at 730°C. The morphology of the resulting microstructures was characterized by optical microscopy. Micrographs unfinished and finished with pre-alloy containing ternary Al5Ti1B evidence fine crystals, crystal containing no columnar structure and highlights the size of the dendrites, and intermetallic phases occurring at grain boundaries in Al-Zn-Mg-Cu alloy. It has been found that these intermetallic compounds are MgZn2 type. AlTiB master alloys finishing ensures a fine eutectic structure, which determines the properties of hardware and improving the mechanical properties of aluminum alloys used in aeronautical engineering.

  16. 1300 K compressive properties of a reaction milled NiAl-AlN composites

    NASA Technical Reports Server (NTRS)

    Whittenberger, J. Daniel; Arzt, Eduard; Luton, Michael J.

    1990-01-01

    When B2 crystal-structure nickel aluminide is subjected to high-intensity mechanical ball milling in a liquid nitrogen bath, or 'cryomilling', an NiAl composite is obtained which contains about 10 vol pct AlN particles. This composition arises from the incorporation of N during cryomilling; during subsequent thermomechanical processing, the N reacts with Al. While compressive testing of extruded or isostatically pressed specimens at 1300 K indicated that strength at relatively fast strain rates is slightly dependent on consolidation method, slower strain rates indicate no clear dependency on densification technique: four different consolidation methods were found to yield similar creep strengths. The creep properties of NiAl-AlN are similar to those of the single-crystal Ni-base superalloy NASAIR 100.

  17. An impedance study of complex Al/Cu-Al2O3 electrode

    NASA Astrophysics Data System (ADS)

    Denisova, J.; Katkevics, J.; Erts, D.; Viksna, A.

    2011-06-01

    Electrochemical impedance spectroscopy (EIS) was used to investigate different Cu deposition regimes on Al surface obtained by internal electrolysis and to characterize properties of fabricated electrodes. EIS experimental data confirmed that Cu deposition by internal electrolysis is realized and the complex electrode system is obtained. The main difficulty in preparation of Al/Cu electrodes is to prevent aluminium oxidation before and during electrochemical deposition of Cu particles. In this work NaCl, CH3COONa, K2SO4, mono- and diammonium citrate electrolytes were examined to determine their suitability for impedance measurements. Al/Cu-Al2O3 electrode composition was approved by equivalent circuit analysis, optical and scanning electron microscope methods. The most optimal Cu deposition mode using internal electrolysis was determined. The obtained results are promising for future electrochemical fabrication of nanostructures directly on Al surfaces by internal electrolysis.

  18. CVD Fiber Coatings for Al2O3/NiAl Composites

    NASA Technical Reports Server (NTRS)

    Boss, Daniel E.

    1995-01-01

    While sapphire-fiber-reinforced nickel aluminide (Al2O3/NiAl) composites are an attractive candidate for high-temperature structures, the significant difference in the coefficient of thermal expansion between the NiAl matrix and the sapphire fiber creates substantial residual stresses in the composite. This study seeks to produce two fiber-coating systems with the potential to reduce the residual stresses in the sapphire/NiAl composite system. Chemical vapor deposition (CVD) was used to produce both the compensating and compliant-fiber coatings for use in sapphire/NiAl composites. A special reactor was designed and built to produce the FGM and to handle the toxic nickel precursors. This process was successfully used to produce 500-foot lengths of fiber with coating thicknesses of approximately 3 microns, 5 microns, and 10 microns.

  19. Bonding characters of Al-containing bulk metallic glasses studied by 27Al NMR.

    PubMed

    Xi, X K; Sandor, M T; Wang, H J; Wang, J Q; Wang, W H; Wu, Y

    2011-03-23

    We report very small (27)Al metallic shifts in a series of Cu-Zr-Al bulk metallic glasses. This observation and the Korringa type of spin-lattice relaxation behavior suggest that s-character wavefunctions weakly participate in bonding and opens the possibility of enhanced covalency (pd hybridization) with increasing Al concentration, in good agreement with elastic constants and hardness measurements. Moreover, ab initio calculations show that this bonding character originates from the strong Al 3p band and Zr 4d band hybridization since their atomic energy levels are closer to each other while the Al 3s band is localized far below the Fermi level. This study might provide a chemical view for understanding flow and fracture mechanisms of these bulk glass-forming alloys.

  20. El aprendizaje significativo en las ciencias al participar en proyectos de investigacion cientifica

    NASA Astrophysics Data System (ADS)

    Mora Polanco, Miguelena

    La ciencia es el eje fundamental a traves del cual se desarrollan las habilidades necesarias para el pensar cientifico que va a la busqueda del conocimiento cientifico. La intencion de este estudio fue indagar en el tema de investigacion cientifica desde el punto de vista de los participantes en los siguientes aspectos relacionados con la experiencia de investigacion cientifica: a) conceptos, b) proceso, c) destrezas y d) disposicion. Tambien se analizaron: a) las perspectivas del metodo cientifico, b) la estrategia de ensenanza, c) la cultura cientifica y d) la exposicion del proyecto investigativo en la Feria Cientifica; como parte del aprendizaje significativo de la ciencias de los participantes. Esta investigacion cualitativa propuso como diseno el estudio de caso. Los aspectos relacionados a la experiencia de participar en proyecto de investigacion cientifica son el fenomeno o caso bajo estudio. En el estudio participaron cinco (5) estudiantes egresados de escuela publica o privada que cursaban hasta el tercer ano de estudios universitarios, conducentes a un bachillerato en educacion secundaria en ciencias o en ciencias naturales. Las tecnicas utilizadas para recopilar los datos fueron: analisis de documentos del DEPR, revision de artefactos y entrevistas profundas. Para el analisis de los datos de las entrevistas se utilizo el modelo de Wolcott (1994). Del analisis de documentos del DEPR se identificaron areas a mejorar en las guias de las cartas circulares con relacion a la investigacion escolar y la feria cientifica. El analisis de los artefactos proveyo evidencia de como los internados, simposios e investigaciones fomentan el que los estudiantes se superen en el aspecto cognitivo, se conviertan en creadores del conocimiento, al hacer suyo los conceptos para poder explicarlos al publico. De las entrevistas los participantes manifestaron que la experiencia de investigacion fue una de aprendizaje significativo que los marco para toda la vida y les expandio su

  1. Wear characteristics of Al-AlN composites produced in-situ by nitrogenation

    NASA Astrophysics Data System (ADS)

    Pradhan, S.; Jena, S. K.; Patnaik, S. C.; Swain, P. K.; Majhi, J.

    2015-02-01

    In the present scenario most of the parts used in automobile and aerospace industries are made of composites. Aluminium metal has a very high strength to weight ratio. Al-AlN metal matrix composites have excellent mechanical properties like good wear resistance, high hardness and high strength to weight ratio which are obtained from low density of aluminium and high hardness and wear resistance of AlN. Therefore, use of Al-AlN MMC leads to advantages in automobile industries as it reduces fuel consumption and gives better structural strength. The composites can be produced ex-situ by introducing AlN as reinforcement into the metal matrix and in- situ by nitrogenation process. In the present process Al-AlN composites were fabricated by treating molten aluminium with a mixture of CaO and NH4Cl and held at temperature range at 750-930°C and then cast into a metal mould. Addition of CaO to NH4Cl is found to have a more pronounced effect as a nitrogenation agent in comparison with NH4Cl in the molten aluminium in the temperature range of 700- 1000°C. Castings of aluminium and Al-AlN composites were prepared by mixing different ratios of aluminium and NH4Cl, at different casting temperatures and holding time. Wear resistance and hardness of the samples were determined, and microstructure studies were carried out. The composite formed using higher amount of NH4Cl had higher hardness and wear resistance.

  2. Formation of gamma(sup prime)-Ni3Al via the Peritectoid Reaction: gamma + beta (+ Al2O3)=gamma(sup prime)(+ Al2O3)

    NASA Technical Reports Server (NTRS)

    Copeland, Evan

    2008-01-01

    The activities of Al and Ni were measured using multi-cell Knudsen effusion-cell mass spectrometry (multi-cell KEMS), over the composition range 8-32 at.%Al and temperature range T=1400-1750 K in the Ni-Al-O system. These measurements establish that equilibrium solidification of gamma(sup prime)-Ni3Al-containing alloys occurs by the eutectic reaction, L (+ Al2O3)=gamma + Beta(+ Al2O3), at 1640 +/- 1 K and a liquid composition of 24.8 +/- 0.2 at.%al (at an unknown oxygen content). The {gamma + Beta (+Al2O3} phase field is stable over the temperature range 1633-1640 K, and gamma(sup prime)-Ni3Al forms via the peritectoid, gamma + Beta (+ Al2O3)=gamma(sup prime) (+ Al2O3), at 1633 +/- 1 K. This behavior is consistent with the current Ni-Al phase diagram and a new diagram is proposed. This new Ni-Al phase diagram explains a number of unusual steady-state solidification structures reported previously and provides a much simpler reaction scheme in the vicinity of the gamma(sup prime)-Ni2Al phase field.

  3. Formation of gamma'-Ni3Al via the Peritectoid Reaction: gamma plus beta (+Al2O3) equals gamma'(+Al2O3)

    NASA Technical Reports Server (NTRS)

    Copland, Evan

    2008-01-01

    The activities of Al and Ni were measured using multi-cell Knudsen effusion-cell mass spectrometry (multi-cell KEMS), over the composition range 8 - 32 at.%Al and temperature range T = 1400 - 1750 K in the Ni-Al-O system. These measurements establish that equilibrium solidification of gamma'-Ni3Al-containing alloys occurs by the eutectic reaction, L (+ Al2O3) = gamma + beta (+ Al2O3), at 1640 plus or minus 1 K and a liquid composition of 24.8 plus or minus 0.2 at.%Al (at an unknown oxygen content). The {gamma + beta + Al2O3} phase field is stable over the temperature range 1633 - 1640 K, and gamma'-Ni3Al forms via the peritectiod, gamma + beta (+ Al2O3) = gamma'(+ Al2O3), at 1633 plus or minus 1 K. This behavior is inconsistent with the current Ni-Al phase diagram and a new diagram is proposed. This new Ni-Al phase diagram explains a number of unusual steady state solidification structures reported previously and provides a much simpler reaction scheme in the vicinity of the gamma'-Ni3Al phase field.

  4. Fragrance material review on 1-(para-menthen-6-yl)-1-propanone.

    PubMed

    Scognamiglio, J; Letizia, C S; Api, A M

    2013-12-01

    A toxicologic and dermatologic review of 1-(para-Menthen-6-yl)-1-propanone when used as a fragrance ingredient is presented. 1-(para-Menthen-6-yl)-1-propanone is a member of the fragrance structural group Alkyl Cyclic Ketones. These fragrances can be described as being composed of an alkyl, R1, and various substituted and bicyclic saturated or unsaturated cyclic hydrocarbons, R2, in which one of the rings may include up to 12 carbons. Alternatively, R2 may be a carbon bridge of C2-C4 carbon chain length between the ketone and cyclic hydrocarbon. This review contains a detailed summary of all available toxicology and dermatology papers that are related to this individual fragrance ingredient and is not intended as a stand-alone document. Available data for 1-(para-Menthen-6-yl)-1-propanone were evaluated then summarized and includes physical properties, acute toxicity, skin irritation, and skin sensitization, data. A safety assessment of the entire Alkyl Cyclic Ketones will be published simultaneously with this document; please refer to Belsito et al. (2013) [Belsito, D., Bickers, D., Bruze, M., Calow, P., Dagli, M., Fryer, A.D., Greim, H., Miyachi, Y., Saurat, J.H., Sipes, I.G., 2013 A Toxicologic and Dermatologic Assessment of Alkyl Cyclic Ketones When Used as Fragrance Ingredients. Submitted with this manuscript.] for an overall assessment of the safe use of this material and all Alkyl Cyclic Ketones in fragrances. Copyright © 2013. Published by Elsevier Ltd.

  5. Reduced graphene oxide as a protection layer for Al

    NASA Astrophysics Data System (ADS)

    Jang, Haneul; Kim, Jae-Hun; Kang, Heon; Bae, Donghyun; Chang, Hyejung; Choi, Hyunjoo

    2017-06-01

    This study proposes a facile solution process to generate a reduced graphene oxide (rGO) protection layer on Al, in which polyvinyl alcohol (PVA) is used to enhance interfacial bonding between Al and rGO. A multi-level analysis indicated that PVA-aided coating induced numerous conjugations between Al and rGO by producing a large number of hydroxyl groups on the Al surface. The Al plate directly coated by rGO showed good corrosion resistance compared with the pristine Al, implying that rGO may act as an effective corrosion barrier for Al. Moreover, the Al coated by the PVA-aided process exhibited higher corrosion resistance than the directly coated Al as well as the pristine Al due to the enhanced adhesion between Al and rGO.

  6. El uso de la neuromodulación para el tratamiento del temblor

    PubMed Central

    Bendersky, Damián; Ajler, Pablo; Yampolsky, Claudio

    2014-01-01

    Introducción: El temblor puede ser un desorden incapacitante y el tratamiento de primera línea para estos pacientes es farmacológico. Sin embargo, este tratamiento puede llevar a una reducción satisfactoria del temblor en sólo el 50% de los pacientes con temblor esencial. La talamotomía era el tratamiento de elección para el temblor refractario al tratamiento médico hasta que comenzó a utilizarse la estimulación cerebral profunda (ECP) del núcleo ventral intermedio (Vim) del tálamo. En la actualidad, raramente se realiza la talamotomía. Métodos: Este artículo es una revisión no sistemática de las indicaciones, resultados, parámetros de programación y técnica quirúrgica de la ECP del Vim para el tratamiento del temblor. Resultados: Aunque los resultados clínicos son similares usando la talamotomía o la ECP del Vim, la primera causa más efectos adversos que la última. Además, la ECP puede ser usada bilateralmente, mientras que la talamotomía tiene un alto riesgo de causar disartria cuando se realiza de ambos lados. La ECP del Vim logró una adecuada mejoría del temblor en varias series de pacientes con temblor causado por temblor esencial, enfermedad de Parkinson o esclerosis múltiple. Además del Vim, hay otros blancos que están siendo usados por varios autores, tales como la zona incerta y las radiaciones prelemniscales. Conclusión: La ECP del Vim es un tratamiento útil para el temblor incapacitante refractario al tratamiento médico. Es esencial realizar una precisa selección de pacientes, así como utilizar una técnica quirúrgica correcta. Aún se desconoce el mejor blanco estereotáctico para el temblor, aunque el Vim es el más usado. PMID:25165613

  7. The modulation structure induced changes in mechanical properties of TiAlN/Al2O3 multilayers

    NASA Astrophysics Data System (ADS)

    Yan, J. Y.; Li, D. J.; Dong, L.; Gao, C. K.; Wang, N.; Deng, X. Y.; Gu, H. Q.; Wan, R. X.; Sun, X.

    2013-07-01

    TiAlN/Al2O3 multilayers which had different separate layer thickness of TiAlN or Al2O3 were synthesized by sputtering Ti3Al and Al2O3 targets with N2 and Ar gases. The influence of modulation periods and modulation ratios on structure and properties of TiAlN/Al2O3 multilayers was investigated using scanning electron microscopy, X-ray diffraction, X-ray Photoelectron Spectroscopy, surface profiler, and nanoindenter. Compared to TiAlN layer with only (2 0 0) preferred orientation, TiAlN/Al2O3 multilayers were crystallized with orientations in the TiAlN (1 1 1), TiAlN (2 2 2) and AlN (1 0 0). Besides, weak Al2O3 (0 2 2) orientation is observed, when modulation period is 8.9 nm. The maximum hardness about 36.6 GPa was obtained at modulation period of 10.4 nm and modulation ratio of 10:1. The hardness and the toughness of TiAlN/Al2O3 multilayers increase as individual TiAlN layer thickness increases.

  8. 76 FR 35938 - The Designation of Othman al-Ghamdi Also Known as Al Umairah al-Ghamdi, Also Known as Uthman al...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-20

    ... [Federal Register Volume 76, Number 118 (Monday, June 20, 2011)] [Notices] [Page 35938] [FR Doc No: 2011-15290] DEPARTMENT OF STATE [Public Notice 7505] The Designation of Othman al-Ghamdi Also Known as... the Federal Register. Dated: May 11, 2011. Hillary Rodham Clinton, Secretary of State. [FR Doc....

  9. Hughes et al.: Science or Promotion?

    ERIC Educational Resources Information Center

    Loman, L. Anthony; Siegel, Gary L.

    2013-01-01

    The Hughes et al. paper is critiqued generally and in specific areas. The weak nature of the authors' empirical work is discussed along with their enigmatic writing and vague and incorrect use of references, and their simultaneous use of sweeping statements of opinion and narrow analytical focus. This review examines the authors' errors…

  10. Al-Qaida: Terrorist Selection and Recruitment

    DTIC Science & Technology

    2006-01-01

    like them, not alien outsiders. 9. Surrounding potential recruits with peers who are already established recruits. 10. E. Goffman , Behavior in Public...Cultic Studies Journal 1:2 (1984): 167–177. 88 SECTION 1 Al-Qaida and Global Jihad Goffman , E., Behavior in Public Places: Notes on the Social

  11. 75 FR 1420 - Alabama Disaster # AL-00025

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-01-11

    ... From the Federal Register Online via the Government Publishing Office SMALL BUSINESS ADMINISTRATION Alabama Disaster AL-00025 AGENCY: U.S. Small Business Administration. ACTION: Notice. SUMMARY: This is a notice of an Administrative declaration of a disaster for the State of Alabama dated...

  12. 78 FR 4967 - Alabama Disaster #AL-00046

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-01-23

    ... From the Federal Register Online via the Government Publishing Office SMALL BUSINESS ADMINISTRATION Alabama Disaster AL-00046 AGENCY: U.S. Small Business Administration. ACTION: Notice. SUMMARY: This is a notice of an Administrative declaration of a disaster for the State of ALABAMA dated...

  13. 75 FR 474 - Alabama Disaster #AL-00026

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-01-05

    ... [Federal Register Volume 75, Number 2 (Tuesday, January 5, 2010)] [Notices] [Pages 474-475] [FR Doc No: E9-31259] SMALL BUSINESS ADMINISTRATION [Disaster Declaration 11988 and 11989] Alabama Disaster AL-00026 AGENCY: U.S. Small Business Administration. ACTION: Notice. SUMMARY: This is a Notice...

  14. 78 FR 26100 - Alabama Disaster #AL-00050

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-03

    ... From the Federal Register Online via the Government Publishing Office SMALL BUSINESS ADMINISTRATION Alabama Disaster AL-00050 AGENCY: U.S. Small Business Administration. ACTION: Notice. SUMMARY: This is a notice of an Administrative declaration of a disaster for the State of Alabama dated...

  15. 77 FR 7227 - Alabama Disaster #AL-00040

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-10

    ... From the Federal Register Online via the Government Publishing Office SMALL BUSINESS ADMINISTRATION Alabama Disaster AL-00040 AGENCY: U.S. Small Business Administration. ACTION: Notice. SUMMARY: This is a Notice of the Presidential declaration of a major disaster for the State of Alabama...

  16. 75 FR 26814 - Alabama Disaster #AL-00031

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-05-12

    ... [Federal Register Volume 75, Number 91 (Wednesday, May 12, 2010)] [Notices] [Pages 26814-26815] [FR Doc No: 2010-11201] SMALL BUSINESS ADMINISTRATION [Disaster Declaration 12157 and 12158] Alabama Disaster AL-00031 AGENCY: U.S. Small Business Administration. ACTION: Notice. SUMMARY: This is a Notice...

  17. 78 FR 22361 - Alabama Disaster #AL-00049

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-15

    ... From the Federal Register Online via the Government Publishing Office SMALL BUSINESS ADMINISTRATION Alabama Disaster AL-00049 AGENCY: U.S. Small Business Administration. ACTION: Notice. SUMMARY: This is a notice of an Administrative declaration of a disaster for the State of Alabama dated...

  18. 75 FR 26813 - Alabama Disaster #AL-00029

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-05-12

    ... [Federal Register Volume 75, Number 91 (Wednesday, May 12, 2010)] [Notices] [Pages 26813-26814] [FR Doc No: 2010-11199] SMALL BUSINESS ADMINISTRATION [Disaster Declaration 12155 and 12156] Alabama Disaster AL-00029 AGENCY: Small Business Administration. ACTION: Notice. SUMMARY: This is a Notice of...

  19. Quantum Criticality in YFe2Al10

    NASA Astrophysics Data System (ADS)

    Gannon, William; Wu, Liusuo; Zaliznyak, Igor; Qiu, Yiming; Rodriguez-Rivera, Jose; Aronson, Meigan

    Quantum criticality has been studied in many systems, but there are few systems where observed scaling can be unified with a critical free energy F, or where the critical exponents form the basis for QC universality classes. We have identified a new layered material YFe2Al10 that shows remarkably strong QC behavior, where the scaling properties of the magnetic susceptibility and specific heat are consistent with the same F. Recent neutron scattering results paint a remarkable picture of the QC fluctuations in YFe2Al10. In contrast to classical transitions, where fluctuations are relatively long ranged and inelastic scattering is observed at a magnetic zone center, in YFe2Al10 the scattering is independent of wave vector in the critical plane, indicating that the fluctuations are spatially localized, while out of plane scattering indicates that the interplaner interactions are restricted to nearest neighbors. The dynamical susceptibility χ'' ~=E-2 , and is wholly temperature independent, indicating that E/T scaling is present, the signature of QC fluctuations. These results hint that the the criticality in YFe2Al10 is local, which until now has only been found in a few f-electron based compounds.

  20. Correction to Rothermund et al. (2005)

    ERIC Educational Resources Information Center

    Rothermund, Klaus; Wentura, Dirk; De Houwer, Jan

    2005-01-01

    This article reports an error in the article "Retrieval of Incidental Stimulus-Response Associations as a Source of Negative Priming" by Rothermund et al. ("Journal of Experimental Psychology: Learning, Memory, and Cognition," Vol 31(3) May 2005, 482-495). Table 1 (p. 484) was incorrectly typeset. The correct layout is provided. (The following…

  1. Cryptanalysis on Cheng et al. protocol

    NASA Astrophysics Data System (ADS)

    Thakur, Tejeshwari

    2016-06-01

    Deployment of new node in any wireless sensor network is a sensitive task. This is the reason why, an Access Control Protocol is required in WSN. In this paper, we demonstrate that Access Control Protocol proposed by Cheng et al.[1] for Wireless Sensor Network is insecure. The reason is that this protocol fails to resist the active attack.

  2. Al-Ghazali on Moral Education

    ERIC Educational Resources Information Center

    Alavi, Hamid Reza

    2007-01-01

    Al-Ghazali (1058-1111 CE) is probably the most influential scholar, philosopher, theologian, legal expert, religious reformer and mystic in the history of Islam. Although he wrote extensively about education, and particularly about moral education, this writing is scattered through a number of different works and has received less scholarly…

  3. SPI measurements of Galactic 26Al

    NASA Astrophysics Data System (ADS)

    Diehl, R.; Knödlseder, J.; Lichti, G. G.; Kretschmer, K.; Schanne, S.; Schönfelder, V.; Strong, A. W.; von Kienlin, A.; Weidenspointner, G.; Winkler, C.; Wunderer, C.

    2003-11-01

    The precision measurement of the 1809 keV gamma-ray line from Galactic 26Al is one of the goals of the SPI spectrometer on INTEGRAL with its Ge detector camera. We aim for determination of the detailed shape of this gamma-ray line, and its variation for different source regions along the plane of the Galaxy. Data from the first part of the core program observations of the first mission year have been inspected. A clear detection of the 26Al line at =~ 5-7 sigma significance demonstrates that SPI will deepen 26Al studies. The line intensity is consistent with expectations from previous experiments, and the line appears narrower than the 5.4 keV FWHM reported by GRIS, more consistent with RHESSI's recent value. Only preliminary statements can be made at this time, however, due to the multi-component background underlying the signal at =~ 40 times higher intensity than the signal from Galactic 26Al.

  4. Kinematics of Disease Progression in Bulbar ALS

    ERIC Educational Resources Information Center

    Yunusova, Yana; Green, Jordan R.; Lindstrom, Mary J.; Ball, Laura J.; Pattee, Gary L.; Zinman, Lorne

    2010-01-01

    The goal of this study was to investigate the deterioration of lip and jaw movements during speech longitudinally in three individuals diagnosed with bulbar amyotrophic lateral sclerosis (ALS). The study was motivated by the need to understand the relationship between physiologic changes in speech movements and clinical measures of speech…

  5. Hughes et al.: Science or Promotion?

    ERIC Educational Resources Information Center

    Loman, L. Anthony; Siegel, Gary L.

    2013-01-01

    The Hughes et al. paper is critiqued generally and in specific areas. The weak nature of the authors' empirical work is discussed along with their enigmatic writing and vague and incorrect use of references, and their simultaneous use of sweeping statements of opinion and narrow analytical focus. This review examines the authors' errors…

  6. Al Qaeda: Profile and Threat Assessment

    DTIC Science & Technology

    2005-08-17

    Egypt. Like Abd al-Rahman, Zawahiri had been imprisoned but ultimately acquitted for the October 1981 assassination of Egyptian President Anwar Sadat...killed in Kabul, Afghanistan by U.S. Predator; September 11 planner Khalid Shaikh Mohammed, arrested by Pakistani agents near Rawalpindi; key

  7. Ternary Dy-Er-Al magnetic refrigerants

    DOEpatents

    Gschneidner, K.A. Jr.; Takeya, Hiroyuki

    1995-07-25

    A ternary magnetic refrigerant material comprising (Dy{sub 1{minus}x}Er{sub x})Al{sub 2} for a magnetic refrigerator using the Joule-Brayton thermodynamic cycle spanning a temperature range from about 60K to about 10K, which can be adjusted by changing the Dy to Er ratio of the refrigerant. 29 figs.

  8. Ternary Dy-Er-Al magnetic refrigerants

    DOEpatents

    Gschneidner, Jr., Karl A.; Takeya, Hiroyuki

    1995-07-25

    A ternary magnetic refrigerant material comprising (Dy.sub.1-x Er.sub.x)Al.sub.2 for a magnetic refrigerator using the Joule-Brayton thermodynamic cycle spanning a temperature range from about 60K to about 10K, which can be adjusted by changing the Dy to Er ratio of the refrigerant.

  9. Electron impact exctation of Al X

    NASA Astrophysics Data System (ADS)

    Aggarwal, Kanti; Keenan, Francis

    2013-05-01

    Emission lines of Al ions, including Al X, are important for the modeling and diagnostics of lasing, fusion and astrophysical plasmas, for which atomic data are required for a variety of parameters, such as energy levels, radiative rates (A- values), and excitation rates or equivalently the effective collision strengths (Υ), which are obtained from the electron impact collision strengths (Ω). Experimentally, energy levels are available for Al X on the NIST website, but there is paucity for accurate collisional atomic data. Therefore, here we report a complete set of results (namely energy levels, radiative rates, and effective collision strengths) for all transitions among the lowest 98 levels of Al X. These levels belong to the (1s2) 2s2, 2s2p, 2p2, 2s3 l, 2p3 l, 2s4 l, and 2p4 l configurations. Finally, we also report the A- values for four types of transitions, namely electric dipole (E1), electric quadrupole (E2), magnetic dipole (M1), and magnetic quadrupole (M2), because these are also required for plasma modeling. For our calculations of wavefunctions, we have adopted the fully relativistic GRASP code, and for the calculations of Ω, the Dirac atomic R-matrix code (DARC) of PH Norrington and IP Grant. Additionally, parallel ca

  10. Kinematics of Disease Progression in Bulbar ALS

    ERIC Educational Resources Information Center

    Yunusova, Yana; Green, Jordan R.; Lindstrom, Mary J.; Ball, Laura J.; Pattee, Gary L.; Zinman, Lorne

    2010-01-01

    The goal of this study was to investigate the deterioration of lip and jaw movements during speech longitudinally in three individuals diagnosed with bulbar amyotrophic lateral sclerosis (ALS). The study was motivated by the need to understand the relationship between physiologic changes in speech movements and clinical measures of speech…

  11. U-ALS: A Ubiquitous Learning Environment

    ERIC Educational Resources Information Center

    Piovesan, Sandra Dutra; Passerino, Liliana Maria; Medina, Roseclea Duarte

    2012-01-01

    The diffusion of the use of the learning virtual environments presents a great potential for the development of an application which meet the necessities in the education area. In view of the importance of a more dynamic application and that can adapt itself continuously to the students' necessities, the "U-ALS" (Ubiquitous Adapted Learning…

  12. Hopkins in the A/L

    NASA Image and Video Library

    2013-12-18

    View of Mike Hopkins, Expedition 38 Flight Engineer (FE), during remove and replace (R&R) of Hard Upper Torso (HUT) of Extravehicular Mobility Unit (EMU), in the airlock (A/L) during preparation for EVA-24. Photo was taken during Expedition 38. Image was released by astronaut on Twitter.

  13. Al/Cl2 molten salt battery

    NASA Technical Reports Server (NTRS)

    Giner, J.

    1972-01-01

    Molten salt battery has been developed with theoretical energy density of 5.2 j/kg (650 W-h/lb). Battery, which operates at 150 C, can be used in primary mode or as rechargeable battery. Battery has aluminum anode and chlorine cathode. Electrolyte is mixture of AlCl3, NaCl, and some alkali metal halide such as KCl.

  14. Bierman {ital et al.}Reply:

    SciTech Connect

    Bierman, J.D.; Chan, P.; Liang, J.F.; Kelly, M.P.; Sonzogni, A.A.; Vandenbosch, R.

    1997-05-01

    reply to the Comment by C.H.Dasso et al., Phys. Rev. Lett. 78,XXX(1997). A Reply to the Comment by C.H. Dasso and J. Fern{acute a}ndez-Niello. {copyright} {ital 1997} {ital The American Physical Society}

  15. Desarrollo de un instrumento para medir percepciones sobre el contexto de construccion del conocimiento cientifico de estudiantes universitarios de nuevo ingreso

    NASA Astrophysics Data System (ADS)

    Garcia-Ramirez, Jaime Antonio

    En esta investigacion, se desarrollo un instrumento que permite medir percepciones relacionadas al contexto de constriccion del conocimiento cientifico. Se examinaron instrumentos existentes y se encontro que el VOSTS (Views on science, technology, and society), instrumento desarrollado empiricamente en Canada por Aikenhead, Ryan y Fleming, podia traducirse y validarse en el contexto cultural puertorriqueno. El instrumento es extenso, consta de 113 reactivos, cada uno con una premisa basica relacionada a la tematica ciencia, tecnologia y sociedad y un numero de alternativas relacionadas a la premisa que oscila entre siete y trece. Se delimito su utilizacion a los quince reactivos identificados por los autores como relacionados a la construccion social del conocimiento cientifico. Metodologicamente, se procedio a utilizar el modelo de adaptacion intercultural, que permite que el instrumento desarrollado satisfaga las dimensiones de equivalencia semantica, de contenido, tecnica, de criterio y conceptual, atemperado asi al instrumento original. Se cumplio con este proposito mediante la traduccion de la version original en ingles al espanol y viceversa. Se utilizaron comites para examinar la traduccion y la retro-traduccion del instrumento. Se realizo una prueba piloto con estudiantes universitarios de nuevo ingreso, utilizando el instrumento traducido para asegurar su intelegibilidad. La confiabilidad del instrumento se determino mediante la intervencion de un panel de expertos quienes clasificaron las distintas posiciones dentro de cada reactivo en: realista, con merito e ingenua; se transformaron estas opciones en valores numericos lo que permitio establecer una escala Likert para cada una. Se suministro el instrumento a una muestra de estudiantes universitarios de nuevo ingreso con caracteristicas similares a las de la poblacion puertorriquena en cuanto a ejecucion en las pruebas de aptitud verbal y matematica del College Board. Los resultados de sus contestaciones

  16. [Dietary training for school food service providers in support of the Acuerdo Nacional para la Salud Alimentaria].

    PubMed

    Muñoz-Dávila, Carolina; Rangel-Peniche, Diana Beatriz

    2015-01-01

    Introducción: en apoyo a la problemática de sobrepeso y obesidad en México, en el 2010 se publicó el Acuerdo Nacional para la Salud Alimentaria. A nivel escolar, los comodatarios se consideraron fundamentales para cumplir con ciertos compromisos. El objetivo de esta intervención fue capacitar a comodatarios de los Establecimientos de Consumo Escolar (ECE) en cuanto a los criterios establecidos en los “Lineamientos Generales para el Expendio y Distribución de Alimentos en Planteles de Educación Básica.” Métodos: participaron 13 ECE en San Luis Potosí. Con base en un diagnóstico inicial, se diseñó un curso-taller de 5 sesiones. Se evaluaron conocimientos en materia alimentaria al inicio y al final de las sesiones. Se obtuvo el porcentaje de apego en cuanto a higiene general, preparación y distribución de alimentos, al inicio, al mes y a los dos meses postintervención. Resultados: los comodatarios presentaron pocos conocimientos en los objetivos que persigue el “Acuerdo” en grupos y combinación de alimentos así como en lectura de etiquetas; con cambios significativos en los dos últimos tras la intervención. El porcentaje inicial de cumplimiento en higiene general fue del 60 %, con un incremento de casi 20 % postcapacitación. La preparación y distribución de alimentos no presentaron cambios significativos. Conclusiones: los comodatarios adquirieron conocimientos sobre los lineamientos que debe cubrir un ECE, sin ponerlos en práctica, dado el impacto que ello implica en su economía.

  17. Some TEM observations of Al2O3 scales formed on NiCrAl alloys

    NASA Technical Reports Server (NTRS)

    Smialek, J.; Gibala, R.

    1979-01-01

    The microstructural development of Al2O3 scales on NiCrAl alloys has been examined by transmission electron microscopy. Voids were observed within grains in scales formed on a pure NiCrAl alloy. Both voids and oxide grains grew measurably with oxidation time at 1100 C. The size and amount of porosity decreased towards the oxide-metal growth interface. The voids resulted from an excess number of oxygen vacancies near the oxidemetal interface. Short-circuit diffusion paths were discussed in reference to current growth stress models for oxide scales. Transient oxidation of pure, Y-doped, and Zr-doped NiCrAl was also examined. Oriented alpha-(Al, Cr)2O3 and Ni(Al, Cr)2O4 scales often coexisted in layered structures on all three alloys. Close-packed oxygen planes and directions in the corundum and spinel layers were parallel. The close relationship between oxide layers provided a gradual transition from initial transient scales to steady state Al2O3 growth.

  18. Some TEM observations of Al2O3 scales formed on NiCrAl alloys

    NASA Technical Reports Server (NTRS)

    Smialek, J.; Gibala, R.

    1979-01-01

    The microstructural development of Al2O3 scales on NiCrAl alloys has been examined by transmission electron microscopy. Voids have been observed within grains in scales formed on a pure NiCrAl alloy. Both voids and oxide grains grew measurably with oxidation time at 1100 C. The size and amount of porosity decreased towards the oxide-metal growth interface. It was postulated that the voids resulted from an excess number of oxygen vacancies near the oxide-metal interface. Short-circuit diffusion paths were discussed in reference to current growth stress models for oxide scales. Transient oxidations of pure, Y-doped, and Zr-doped NiCrAl was also examined. Oriented alpha-(Al,Cr)2O3 and Ni(Al,Cr)2O4 scales often coexisted in layered structures on all three alloys. Close-packed oxygen planes and directions in the corundum and spinel layers were parallel. The close relationships between oxide layers provided a gradual transition from initial transient scales to steady state Al2O3 growth.

  19. Effect of speciation transformation on the coagulation behavior of Al(13) and Al(13) aggregates.

    PubMed

    Wu, Xiaohong; Ye, Changqing; Wang, Dongsheng; Ge, Xiaopeng; Tang, Hongxiao

    2009-01-01

    Flocculation of kaolin suspension with aluminium fractal polycations was investigated as a function of aluminium concentration and pH. Aluminium flocculants included Al(13) and Al(13) aggregates with OH/Al ratio of 2.6 and 2.8, respectively. The flocculation kinetics and floc size distribution were monitored by light scattering. The characterization of flocculants showed that the tridecatmer Al(13) and bridged [Al(13)](n) with out-sphere structure were the dominant species for all flocculants in a wide pH range. The coagulation results indicated that the pre and in situ-formed [Al(13)](n) play a key role in removing particles. With the increasing concentration of [Al(13)](n), coagulation mechanisms were transformed from charge-neutralization, electro-patch coagulation to bridge-aggregation. Moreover, sweep-flocculation was involved at higher dosage besides other three mechanisms when amorphous aluminium oxides formed. Hence, chemical interaction between particles and flocculants evolved from surface adsorption to surface precipitation for aluminium polycations by virtue of species transformation.

  20. A novel Al matrix composite reinforced by nano-AlNp network

    PubMed Central

    Ma, X.; Zhao, Y. F.; Tian, W. J.; Qian, Z.; Chen, H. W.; Wu, Y. Y.; Liu, X. F.

    2016-01-01

    In pursuit of lightweighting of automobiles and low emission of transportation, the efforts to develop high-strength, heat-resistant and fatigue-resistant Al alloys and/or composites have been ongoing. Here we report a novel Al matrix composite with ultrahigh strength reinforced by a three dimensional network of nano-AlN particles for the first time. The in-situ synthesized AlN particles are connected by twinning bonding chains and built up a three dimensional network strengthening Al matrix enormously like the skeleton to human body. The composite containing 16.4wt.% AlN particles shows excellent properties: the ultimate tensile strengths can be up to 518MPa at room temperature and 190MPa at 350 °C. This peculiar performance results from the novel spatial distribution of nano-scale AlN particles. Our findings in this work would help to develop a potential candidate for high-performance heat resistance light-metal based materials. PMID:27721417

  1. AlGaN/AlN integrated photonics platform for the ultraviolet and visible spectral range.

    PubMed

    Soltani, Mohammad; Soref, Richard; Palacios, Tomas; Englund, Dirk

    2016-10-31

    We analyze a photonic integrated circuit (PIC) platform comprised of a crystalline AlxGa1-xN optical guiding layer on an AlN substrate for the ultraviolet to visible (UV-vis) wavelength range. An Al composition of x~0.65 provides a refractive index difference of ~0.1 between AlxGa1-xN and AlN, and a small lattice mismatch (< 1%) that minimizes crystal dislocations at the AlxGa1-xN/AlN interface. This small refractive index difference is beneficial at shorter wavelengths to avoid extra-small waveguide dimensions. The platform enables compact waveguides and bends with high field confinement in the wavelength range from 700 nm down to 300 nm (and potentially lower) with waveguide cross-section dimensions comparable to those used for telecom PICs such as silicon and silicon nitride waveguides, allowing for well-established optical lithography. This platform can potentially enable cost-effective, manufacturable, monolithic UV-vis photonic integrated circuits.

  2. Some TEM observations of Al2O3 scales formed on NiCrAl alloys

    NASA Technical Reports Server (NTRS)

    Smialek, J.; Gibala, R.

    1979-01-01

    The microstructural development of Al2O3 scales on NiCrAl alloys has been examined by transmission electron microscopy. Voids have been observed within grains in scales formed on a pure NiCrAl alloy. Both voids and oxide grains grew measurably with oxidation time at 1100 C. The size and amount of porosity decreased towards the oxide-metal growth interface. It was postulated that the voids resulted from an excess number of oxygen vacancies near the oxide-metal interface. Short-circuit diffusion paths were discussed in reference to current growth stress models for oxide scales. Transient oxidations of pure, Y-doped, and Zr-doped NiCrAl was also examined. Oriented alpha-(Al,Cr)2O3 and Ni(Al,Cr)2O4 scales often coexisted in layered structures on all three alloys. Close-packed oxygen planes and directions in the corundum and spinel layers were parallel. The close relationships between oxide layers provided a gradual transition from initial transient scales to steady state Al2O3 growth.

  3. A novel Al matrix composite reinforced by nano-AlNp network.

    PubMed

    Ma, X; Zhao, Y F; Tian, W J; Qian, Z; Chen, H W; Wu, Y Y; Liu, X F

    2016-10-10

    In pursuit of lightweighting of automobiles and low emission of transportation, the efforts to develop high-strength, heat-resistant and fatigue-resistant Al alloys and/or composites have been ongoing. Here we report a novel Al matrix composite with ultrahigh strength reinforced by a three dimensional network of nano-AlN particles for the first time. The in-situ synthesized AlN particles are connected by twinning bonding chains and built up a three dimensional network strengthening Al matrix enormously like the skeleton to human body. The composite containing 16.4wt.% AlN particles shows excellent properties: the ultimate tensile strengths can be up to 518MPa at room temperature and 190MPa at 350 °C. This peculiar performance results from the novel spatial distribution of nano-scale AlN particles. Our findings in this work would help to develop a potential candidate for high-performance heat resistance light-metal based materials.

  4. Wetting of polycrystalline SiC by molten Al and Al-Si alloys

    NASA Astrophysics Data System (ADS)

    Cong, Xiao-Shuang; Shen, Ping; Wang, Yi; Jiang, Qichuan

    2014-10-01

    The wetting of α-SiC by molten Al and Al-Si alloys was investigated using a dispensed sessile drop method in a high vacuum. In the Al-SiC system, representative wetting stages were identified. The liquid spreading was initially controlled by the deoxidation of the SiC surface and then by the formation of Al4C3 at the interface. The intrinsic contact angle for molten Al on the polycrystalline α-SiC surface was suggested to be lower than 90̊ provided that the oxide films covering the Al and SiC surfaces were removed, i.e., the system is partial wetting in nature. An increase in the Si concentration in liquid Al weakened the interfacial reaction but improved the final wettability. The role of the Si addition on the wetting was presumably attributed to its segregation at the interface and the formation of strong chemical bonds with the SiC surface.

  5. A novel Al matrix composite reinforced by nano-AlNp network

    NASA Astrophysics Data System (ADS)

    Ma, X.; Zhao, Y. F.; Tian, W. J.; Qian, Z.; Chen, H. W.; Wu, Y. Y.; Liu, X. F.

    2016-10-01

    In pursuit of lightweighting of automobiles and low emission of transportation, the efforts to develop high-strength, heat-resistant and fatigue-resistant Al alloys and/or composites have been ongoing. Here we report a novel Al matrix composite with ultrahigh strength reinforced by a three dimensional network of nano-AlN particles for the first time. The in-situ synthesized AlN particles are connected by twinning bonding chains and built up a three dimensional network strengthening Al matrix enormously like the skeleton to human body. The composite containing 16.4wt.% AlN particles shows excellent properties: the ultimate tensile strengths can be up to 518MPa at room temperature and 190MPa at 350 °C. This peculiar performance results from the novel spatial distribution of nano-scale AlN particles. Our findings in this work would help to develop a potential candidate for high-performance heat resistance light-metal based materials.

  6. Investigation of water assisted phase transformation process from AlPO4-5 to AlPO4-tridymite

    SciTech Connect

    Xu, Suochang; Zhao, Zhenchao; Hu, Mary Y.; Han, Xiuwen; Hu, Jian Zhi; Bao, Xinhe

    2016-03-01

    Water assisted phase transformation process from crystalized AlPO4-5 to AlPO4-tridymite was studied by the combination of X-ray diffraction (XRD), Scanning Electron Microscopy (SEM) and in situ multinuclear MAS NMR. It is found that water first activates the residue amorphous aluminophosphate in crystalized AlPO4-5 sample through hydrolysis and condensation reactions. Then the activated aluminophosphate species reassemble into AlPO4-tridymite crystalline. Meanwhile, AlPO4-5 transforms into orthorhombic phase during heating process. With further crystallization of AlPO4-tridymite, the amorphous phase is gradually consumed, and mass transportation between AlPO4-5 and AlPO4-tridymite is established through gradually amorphization of AlPO4-5. Finally, most of the AlPO4-5 transforms into the thermodynamically stable dense phase AlPO4-tridymite.

  7. Electrochemical formation of Al-Tm intermetallics in eutectic LiCl-KCl melt containing Tm and Al ions

    NASA Astrophysics Data System (ADS)

    Li, Xing; Yan, Yong-De; Zhang, Mi-Lin; Tang, Hao; Ji, De-Bin; Han, Wei; Xue, Yun; Zhang, Zhi-Jian

    2014-09-01

    This work focuses on investigating the electrochemical formation of Al-Tm and Al-Li-Tm alloys in LiCl-KCl-AlCl3-Tm2O3 melt on both W and Al electrodes. Thermodynamic calculation and electrochemical behavior of LiCl-KCl melt containing both AlCl3 and Tm2O3 showed that AlCl3 can chlorinate Tm2O3 to release Tm(III) ions. Three kinds of Al-Tm intermetallics at about -1.26, -1.32 and -1.43 V were detected by means of various electrochemical measurement techniques, i.e. cyclic voltammetry, square wave voltammetry and open circuit chronopotentiometry. Potentiostatic and galvanostatic electrolysis were carried out on Al and W electrodes to prepare Al-Tm and Al-Li-Tm alloys, respectively. The composition of Al-Li-Tm alloys was analyzed by inductive coupled plasma atomic emission spectrometer (ICP-AES).

  8. Aberrant distributions of nuclear pore complex proteins in ALS mice and ALS patients.

    PubMed

    Shang, Jingwei; Yamashita, Toru; Nakano, Yumiko; Morihara, Ryuta; Li, Xianghong; Feng, Tian; Liu, Xia; Huang, Yong; Fukui, Yusuke; Hishikawa, Nozomi; Ohta, Yasuyuki; Abe, Koji

    2017-03-24

    Nuclear pore complexes (NPCs) play important roles in traffic of molecules between the nucleus and cytoplasm, aberrant distributions of components of NPCs were demonstrated in C9orf72 amyotrophic lateral sclerosis (C9-ALS) patients, but it is elusive whether such abnormities are also the case with other cause of ALS disease. In the present study, we investigated the spatiotemporal distributions of RanGAP1 and 4 representative nucleoporins (GP210, NUP205, NUP107 and NUP50) of NPCs in human Cu/Zn superoxide dismutase-1 mutation transgenic (SOD1-Tg) mice and sporadic ALS patients. Compared with wild type (WT), these proteins displayed age-dependent and progressive nuclear precipitations, and cytoplasmic aberrant expressions in motor neurons of lumbar cord in SOD1-Tg mice from 10 to 18weeks (W). Double immunofluorescent analysis showed abnormal nuclear retention and apparent co-localizations of RanGAPl with NUP205 and NUP205 with NUPl07, meanwhile, GP210 with NUP205 mainly co-localized in the nuclear envelope (NE) of motor neurons. Furthermore, RanGAP1, GP210 and NUP50 showed similarly abnormal nuclear precipitations and cytoplasmic upregulations in SOD1-Tg mice and ALS patients, moreover, aberrant co-localizations of RanGAP1 with TDP-43 and NUP205 with TDP-43 were also observed in motor neurons. The present study indicated that the mislocalization of these proteins of NPCs may underlie the pathogenesis of ALS both in SOD1-Tg mice and human sporadic ALS patients, and these dysfunctions may be a fundamental pathway for ALS that is not specific only in C9-ALS but also in SOD1-ALS, which may be amenable to pharmacotherapeutic intervention.

  9. An epidemiological study of cutaneous leishmaniasis in Al-jabal Al-gharbi, Libya.

    PubMed

    Abdellatif, Manal Z M; El-Mabrouk, Khamis; Ewis, Ashraf A

    2013-02-01

    Cutaneous leishmaniasis (CL) is an endemic parasitic infection in the Mediterranean region, including Libya and its Al-jabal Al-gharbi province. We aimed at studying the occupational relevance as well as other epidemiological aspects of CL. We investigated 140 CL cases who attended at Gharyan outpatient polyclinic during a period of 6 months in 2009. CL infection was clinically diagnosed and confirmed by demonstration of Leishmania parasites on smears from lesions. Our findings showed that males were more affected than females (P=0.04), and people above 10-years were more affected than younger ones (P=0.0001). A significant percent of CL cases belonged to Al-Kawasem subprovince (P=0.0001). Farm-related activities were the most frequent occupations among CL cases (P=0.04). In addition to farm workers, housewives and students are at risk groups since they are engaged at farm activities. Moreover, those who have occupations that require staying outdoors for a part of night, e.g., policemen, are also at risk. Compared to children, adult CL patients had multiple lesions (P=0.001) that were more prevalent in their upper and lower extremities than the face (P=0.0001). We conclude that CL is a major health problem in Al-jabal Al-gharbi province of Libya. The presence of rodents and sandflies makes it a suitable environment for Leishmania to spread in an endemic epidemiological pattern. Being engaged in farming activities or outdoor occupations increases the risk of infection. Various clinical patterns of CL suggest the presence of more than 1 species of Leishmania at Al-jabal Al-gharbi province. We propose that the 2 species responsible for CL in this area are L. major and L. tropica. Further investigations to identify the leishmanial species responsible for CL at Al-jabal Al-gharbi together with adoption of preventive and control programs are needed.

  10. An Epidemiological Study of Cutaneous Leishmaniasis in Al-Jabal Al-Gharbi, Libya

    PubMed Central

    Abdellatif, Manal Z. M.; El-Mabrouk, Khamis

    2013-01-01

    Cutaneous leishmaniasis (CL) is an endemic parasitic infection in the Mediterranean region, including Libya and its Al-jabal Al-gharbi province. We aimed at studying the occupational relevance as well as other epidemiological aspects of CL. We investigated 140 CL cases who attended at Gharyan outpatient polyclinic during a period of 6 months in 2009. CL infection was clinically diagnosed and confirmed by demonstration of Leishmania parasites on smears from lesions. Our findings showed that males were more affected than females (P=0.04), and people above 10-years were more affected than younger ones (P=0.0001). A significant percent of CL cases belonged to Al-Kawasem subprovince (P=0.0001). Farm-related activities were the most frequent occupations among CL cases (P=0.04). In addition to farm workers, housewives and students are at risk groups since they are engaged at farm activities. Moreover, those who have occupations that require staying outdoors for a part of night, e.g., policemen, are also at risk. Compared to children, adult CL patients had multiple lesions (P=0.001) that were more prevalent in their upper and lower extremities than the face (P=0.0001). We conclude that CL is a major health problem in Al-jabal Al-gharbi province of Libya. The presence of rodents and sandflies makes it a suitable environment for Leishmania to spread in an endemic epidemiological pattern. Being engaged in farming activities or outdoor occupations increases the risk of infection. Various clinical patterns of CL suggest the presence of more than 1 species of Leishmania at Al-jabal Al-gharbi province. We propose that the 2 species responsible for CL in this area are L. major and L. tropica. Further investigations to identify the leishmanial species responsible for CL at Al-jabal Al-gharbi together with adoption of preventive and control programs are needed. PMID:23467624

  11. Non-volatile Al2O3 Memory using Nanoscale Al-rich Al2O3 Thin Film as a Charge Storage Layer

    NASA Astrophysics Data System (ADS)

    Nakata, Shunji; Saito, Kunio; Shimada, Masaru

    2006-04-01

    This article describes the fabrication process and capacitance-voltage (C-V) characteristics of a new non-volatile Al2O3 memory with nanoscale thin film deposited by electron-cyclotron-resonance sputtering. Al-rich Al2O3 shows characteristics somewhere between Al and Al2O3 in the refractive index and wet etching rate. C-V characteristics of Al-rich Al2O3 memory show a large hysteresis window due to the Al-rich structure, while there is no hysteresis window in the case of stoichiometric Al2O3. This memory is expected to stay non-volatile for several years or more because the capacitance value after writing and erasing operation remained almost unchanged after 4 h at T=85 °C. Also, another new memory structure comprising SiO2/Al2O3 and the Al-rich Al2O3 structure is proposed, which features increased mobility due to the reduction of electron scattering at the Si/Al2O3 interface.

  12. Mechanochemical synthesis and crystal structure of alpha'-AlD3 and alpha-AlD3.

    PubMed

    Brinks, Hendrik W; Istad-Lem, Andreas; Hauback, Bjørn C

    2006-12-28

    AlD3 AlD3 was synthesized by ball milling of 3LiAlD4 + AlCl3. Planetary ball milling at room temperature resulted in a mixture of AlD3 (alpha and alpha') and Al in addition to LiCl, whereas cryomilling at 77 K resulted in only AlD3 and LiCl. The AlD3 obtained was a mixture of about 2/3alpha and 1/3alpha'. Alpha' was determined by powder neutron diffraction to take the beta-AlF3 structure with space group Cmcm and a = 6.470(3), b = 11.117(5), and c = 6.562(2) A. It is built up of corner-sharing AlD6 octahedra in an open structure with hexagonal holes of radius 3.9 A. Alpha' slowly decomposes during storage at 40 degrees C. Alpha-AlD3 is also described by a corner-sharing AlD6 network but in a more dense ReO3-type arrangement. Both AlD3 modifications have slightly shorter Al-D distances compared to Na3AlD6, Na2LiAlD6, and K2NaAlH6.

  13. Theoretical study of the vibrational properties of NaAlH4 with AlH3 vacancies

    NASA Astrophysics Data System (ADS)

    Chou, Mei-Yin; Zhang, Feng; Wang, Yan

    2011-03-01

    We investigate from first-principles calculations the vibrational properties in the presence of the AlH3 vacancy in both α and γ phases of NaAlH4 . When AlH3 is removed from an AlH4- anion, the remaining H recombines with another neighboring AlH4- anion and forms an AlH52 - unit with slightly deformed D3 h symmetry. For both α - and γ -NaAlH4 , the AlH3 vacancy induces several isolated phonon modes that are highly localized on the AlH52 - unit with frequencies within the band gap separating the Al-H stretching modes and Al-H bending modes in pure NaAlH4 . Similar localized phonon modes also exist in the gap separating the Al-H bending modes and the modes involving the rotation of AlH4- anions for the γ phase. On the other hand, for both α and γ phases of NaAlH4 with charged AlH4- vacancies, no isolated phonon modes were found to be localized in the vacancy region with frequencies within the band gap of the pure crystal. These theoretical findings suggest further experimental studies to identify the defects that are involved in the decomposition of NaAlH4 .

  14. Mechanical properties and electronic structures of Fe-Al intermetallic

    NASA Astrophysics Data System (ADS)

    Liu, YaHui; Chong, XiaoYu; Jiang, YeHua; Zhou, Rong; Feng, Jing

    2017-02-01

    Using the first-principles calculations, the elastic properties, anisotropy properties, electronic structures, Debye temperature and stability of Fe-Al (Fe3Al, FeAl, FeAl2, Fe2Al5 and FeAl3) binary compounds were calculated. The formation enthalpy and cohesive energy of these Fe-Al compounds are negative, and show they are thermodynamically stable structures. Fe2Al5 has the lowest formation enthalpy, which shows the Fe2Al5 is the most stable of Fe-Al binary compounds. These Fe-Al compounds display disparate anisotropy due to the calculated different shape of the 3D curved surface of the Young's modulus and anisotropic index. Fe3Al has the biggest bulk modulus with the value 233.2 GPa. FeAl has the biggest Yong's modulus and shear modulus with the value 296.2 GPa and 119.8 GPa, respectively. The partial density of states, total density of states and electron density distribution maps of the binary Fe-Al binary compounds are analyzed. The bonding characteristics of these Fe-Al binary compounds are mainly combination by covalent bond and metallic bonds. Meanwhile, also exist anti-bond effect. Moreover, the Debye temperatures and sound velocity of these Fe-Al compounds are explored.

  15. When Validity Testing Lacks Validity: Comment on Levine et al.

    ERIC Educational Resources Information Center

    Kim, Min-Sun; Raja, Narayan S.

    2003-01-01

    Addresses each of the three main areas of Levine et al.'s (see this issue, CS 764 297) validity testing: mean differences in self-construals between Asians and Westerners and within individuals; priming experiments; and factor analysis of self-construal scales. Suggests that Levine et al.'s conclusions on crucial aspects of validity are untenable.…

  16. The dissociation energies of AlH 2 and AlAr

    NASA Astrophysics Data System (ADS)

    Partridge, Harry; Bauschlicher, Charles W., Jr.; Visscher, Luuk

    1995-11-01

    The D0 values for AlH 2 and AlAr are computed using the coupled cluster approach in conjunction with large basis sets. Basis set superposition and spin-orbit effects are accounted for, as they are significant due to the small binding energy. The computed dissociation energy ( D0) for AlAr is 114 cm -1, which is 93% of the experimental value (122.4 cm -1). Our best estimate for the AlH 2 binding energy is 38 ± 26 cm -1.

  17. Ferromagnetic ordering in NpAl2: Magnetic susceptibility and 27Al nuclear magnetic resonance

    NASA Astrophysics Data System (ADS)

    Martel, L.; Griveau, J.-C.; Eloirdi, R.; Selfslag, C.; Colineau, E.; Caciuffo, R.

    2015-08-01

    We report on the magnetic properties of the neptunium based ferromagnetic compound NpAl2. We used magnetization measurements and 27Al NMR spectroscopy to access magnetic features related to the paramagnetic and ordered states (TC=56 K). While very precise DC SQUID magnetization measurements confirm ferromagnetic ordering, they show a relatively small hysteresis loop at 5 K reduced with a coercive field HCo~3000 Oe. The variable offset cumulative spectra (VOCS) acquired in the paramagnetic state show a high sensitivity of the 27Al nuclei spectral parameters (Knight shifts and line broadening) to the ferromagnetic ordering, even at room temperature.

  18. Hot Corrosion Behavior of Stainless Steel with Al-Si/Al-Si-Cr Coating

    NASA Astrophysics Data System (ADS)

    Fu, Guangyan; Wu, Yongzhao; Liu, Qun; Li, Rongguang; Su, Yong

    2017-03-01

    The 1Cr18Ni9Ti stainless steel with Al-Si/Al-Si-Cr coatings is prepared by slurry process and vacuum diffusion, and the hot corrosion behavior of the stainless steel with/without the coatings is studied under the condition of Na2SO4 film at 950 °C in air. Results show that the corrosion kinetics of stainless steel, the stainless steel with Al-Si coating and the stainless steel with Al-Si-Cr coating follow parabolic laws in several segments. After 24 h corrosion, the sequence of the mass gain for the three alloys is the stainless steel with Al-Si-Cr coating < the stainless steel with Al-Si coating < the stainless steel without any coating. The corrosion products of the three alloys are layered. Thereinto, the corrosion products of stainless steel without coating are divided into two layers, where the outside layer contains a composite of Fe2O3 and FeO, and the inner layer is Cr2O3. The corrosion products of the stainless steel with Al-Si coating are also divided into two layers, of which the outside layer mainly consists of Cr2O3, and the inner layer is mainly SiO2. The corrosion film of the stainless steel with Al-Si-Cr coating is thin and dense, which combines well with substrate. Thereinto, the outside layer is mainly Cr2O3, and the inside layer is Al2O3. In the matrix of all of the three alloys, there exist small amount of sulfides. Continuous and protective films of Cr2O3, SiO2 and Al2O3 form on the surface of the stainless steel with Al-Si and Al-Si-Cr coatings, which prevent further oxidation or sulfide corrosion of matrix metals, and this is the main reason for the much smaller mass gain of the two alloys than that of the stainless steel without any coatings in the 24 h hot corrosion process.

  19. Corrosion Fatigue of Al-Zn-Mg and and Al-Mg-Li Alloys.

    DTIC Science & Technology

    1986-01-01

    surface of a sample of the Al-Zn-Mg alloy tested in 0.5 M sodium chloride, at a constant potential of -0.8 I..* xiii ..:S: Vuce ...potential of -0.8 Vuce (10OX). 20g .71 179 eL 4 0.2 mm Figure 97 The fracture surface of a sample of the Al-Zn-Mg alloy tested in 0.5 N sodium...fracture surface of a sample of the Al-Zn-Mg alloy tested in 0.5 N sodium chloride at a constant potential of-1.0 Vuce (20X). : Figure 100 The fracture

  20. Superconductivity of Al/Al2O3 interface formed under shock-wave conditions

    NASA Astrophysics Data System (ADS)

    Shakhray, D. V.; Avdonin, V. V.; Palnichenko, A. V.; Vyaselev, O. M.

    2015-11-01

    A mixture of powdered Al and Al2O3 has been subjected to a shock-wave pressure of ≈ 170 kbar, followed by vacuum-encapsulating and quenching of the product to liquid nitrogen. The ac magnetic susceptibility measurements of the samples have revealed metastable superconductivity with Tc ≈ 37 K, characterized by glassy dynamics of the shielding currents below Tc. Comparison of the ac susceptibility and the dc magnetization measurements infers that the superconductivity arises within the interfacial granular layer formed between metallic Al and its oxide due to the shock-wave treatment.

  1. Revisiting Deng et al.'s Multiparty Quantum Secret Sharing Protocol

    NASA Astrophysics Data System (ADS)

    Hwang, Tzonelih; Hwang, Cheng-Chieh; Yang, Chun-Wei; Li, Chuan-Ming

    2011-09-01

    The multiparty quantum secret sharing protocol [Deng et al. in Chin. Phys. Lett. 23: 1084-1087, 2006] is revisited in this study. It is found that the performance of Deng et al.'s protocol can be much improved by using the techniques of block-transmission and decoy single photons. As a result, the qubit efficiency is improved 2.4 times and only one classical communication, a public discussion, and two quantum communications between each agent and the secret holder are needed rather than n classical communications, n public discussions, and 3n/2 quantum communications required in the original scheme.

  2. Metal clusters with hidden ground states: Melting and structural transitions in Al115(+), Al116(+), and Al117(+).

    PubMed

    Cao, Baopeng; Starace, Anne K; Judd, Oscar H; Bhattacharyya, Indrani; Jarrold, Martin F

    2009-09-28

    Heat capacities measured as a function of temperature for Al(115)(+), Al(116)(+), and Al(117)(+) show two well-resolved peaks, at around 450 and 600 K. After being annealed to 523 K (a temperature between the two peaks) or to 773 K (well above both peaks), the high temperature peak remains unchanged but the low temperature peak disappears. After considering the possible explanations, the low temperature peak is attributed to a structural transition and the high temperature peak to the melting of the higher enthalpy structure generated by the structural transition. The annealing results show that the liquid clusters freeze exclusively into the higher enthalpy structure and that the lower enthalpy structure is not accessible from the higher enthalpy one on the timescale of the experiments. We suggest that the low enthalpy structure observed before annealing results from epitaxy, where the smaller clusters act as a nucleus and follow a growth pattern that provides access to the low enthalpy structure. The solid-to-solid transition that leads to the low temperature peak in the heat capacity does not occur under equilibrium but requires a superheated solid.

  3. Ab initio modeling of zincblende AlN layer in Al-AlN-TiN multilayers

    SciTech Connect

    Yadav, S. K.; Wang, J.; Liu, X. -Y.

    2016-06-13

    An unusual growth mechanism of metastable zincblende AlN thin film by diffusion of nitrogen atoms into Al lattice is established. Using first-principles density functional theory, we studied the possibility of thermodynamic stability of AlN as a zincblende phase due to epitaxial strains and interface effect, which fails to explain the formation of zincblende AlN. We then compared the formation energetics of rocksalt and zincblende AlN in fcc Al through direct diffusion of nitrogen atoms to Al octahedral and tetrahedral interstitials. Furthermore, the formation of a zincblende AlN thin film is determined to be a kinetically driven process, not a thermodynamically driven process.

  4. Ab initio modeling of zincblende AlN layer in Al-AlN-TiN multilayers

    SciTech Connect

    Yadav, S. K.; Wang, J.; Liu, X. -Y.

    2016-06-13

    An unusual growth mechanism of metastable zincblende AlN thin film by diffusion of nitrogen atoms into Al lattice is established. Using first-principles density functional theory, we studied the possibility of thermodynamic stability of AlN as a zincblende phase due to epitaxial strains and interface effect, which fails to explain the formation of zincblende AlN. We then compared the formation energetics of rocksalt and zincblende AlN in fcc Al through direct diffusion of nitrogen atoms to Al octahedral and tetrahedral interstitials. Furthermore, the formation of a zincblende AlN thin film is determined to be a kinetically driven process, not a thermodynamically driven process.

  5. Para Bombay phenotype--a case report.

    PubMed

    Mathai, J; Sulochana, P V; Sathyabhama, S

    1997-10-01

    Bombay phenotype is peculiar in that red cells are not agglutinated by antisera A, B or H; while serum contains anti A, B and H. Existence of modifying genes at independent loci with variable expression of ABO genes is postulated. We report here a case of partial suppression where antigens could be detected by elution tests and unlike classical Bombay type, normal amount of appropriate blood group substances were present in saliva. This case of para Bombay phenotype was detected as a result of discrepancy in cell and serum group ng. This highlights the importance of both forward and reverse grouping in ABO testing.

  6. Core-excitonic lines at the Al 2p surface optical-absorption threshold of AlAs and AlP

    NASA Astrophysics Data System (ADS)

    Kelly, M. K.; Niles, D. W.; Perfetti, P.; Colavita, E.; Savoia, A.; Margaritondo, G.; Henzler, M.

    1985-10-01

    The optical-absorption spectra of AlAs and AlP exhibit unusual features-strong Al 2p core-excitonic lines. The data were obtained with synchrotron-radiation photoemission in the partial-yield mode. The analysis was based on the approach proposed by Johnson, Fock, Ley, and Cardona for AlSb and on Onodera and Toyozawa's exciton theory.

  7. Saturn’s Tropospheric Temperatures and Para-Hydrogen Distribution from Ten Years of Cassini Observations

    NASA Astrophysics Data System (ADS)

    Fletcher, Leigh N.; Irwin, Patrick G.; Sinclair, James; Giles, Rohini; Barstow, Joanna; Achterberg, Richard K.; Orton, Glenn S.

    2014-11-01

    Cassini/CIRS observations of Saturn’s 10-1400 cm-1 spectrum have been inverted to construct a global record of tropospheric temperature and para-hydrogen variability over the ten-year span of the Cassini mission. The data record the slow reversal of seasonal asymmetries in tropospheric conditions from northern winter (2004, Ls=293), through northern spring equinox (2009, Ls=0) to the present day (2014, Ls=60). Mid-latitude tropospheric temperatures have cooled by approximately 4-6 K in the south and warmed by 2-4 K in the north, with the seasonal contrast decreasing with depth. CIRS detected the north polar minimum 100-mbar temperatures 6-8 years after winter solstice, whereas the south polar maximum occurred 1-2 years after summer solstice, consistent with the lag times predicted by radiative equilibrium models. Warm polar cyclones and the northern hexagon persist throughout the mission, suggesting that they are permanent features of Saturn’s tropospheric circulation. The 200-mbar thermal enhancement (“knee”) that was strongest in the summer but weak or absent in winter in 2004-2006 (Fletcher et al., 2007, Icarus 189, p.457-478) has now shifted northward and is present globally in 2014, suggestive of radiative heating in Saturn’s tropospheric haze layer. Saturn’s para-H2 fraction, which serves as a tracer of both tropospheric mixing and the efficiency of re-equilibration between the ortho- and para-hydrogen states, is slowly altering: super-equilibrium conditions (para-H2 fraction exceeding equilibrium expectations and suggestive of subsiding airmasses) that dominated the southern summer hemisphere are now weakening, whereas the sub-equilibrium conditions (suggestive of uplift) of the northern winter are being replaced by equilibrium or super-equilibrium conditions in spring. The thermal ‘knee’ and the para-H2 distribution are tracking both the increased spring illumination and the increasing tropospheric haze opacity of the springtime hemisphere

  8. Adherent Al2O3 scales produced on undoped NiCrAl alloys

    NASA Technical Reports Server (NTRS)

    Smialek, James L.

    1986-01-01

    Repeated oxidation and polishing of high purity Ni-15Cr-13Al has dramatically changed its cyclic oxidation behavior from nonadherent to adherent. No apparent change in scale phase, morphology or interface structure occurred during this transition, dismissing any mechanism based on pegging, vacancy sink, or growth stress. The principle change that did occur was a reduction in the sulfur content from 10 ppmw to 3 ppmw after 25 cycles at 1120 C. These observations are used to support the model of Al2O3 scale adherence put forth by Smeggil et al. which claims that Al2O3 scale spallation occurs due to sulfur segregation and bond deterioration at the oxide-metal interface.

  9. Proximity effect and interface transparency in Al/InAs-nanowire/Al diffusive junctions

    NASA Astrophysics Data System (ADS)

    Bubis, A. V.; Denisov, A. O.; Piatrusha, S. U.; Batov, I. E.; Khrapai, V. S.; Becker, J.; Treu, J.; Ruhstorfer, D.; Koblmüller, G.

    2017-09-01

    We investigate the proximity effect in InAs nanowire (NW) junctions with superconducting contacts made of Al. The carrier density in InAs is tuned by means of the back gate voltage V g. At high positive V g the devices feature transport signatures characteristic of diffusive junctions with highly transparent interfaces—sizable excess current, re-entrant resistance effect and proximity gap values ({{{Δ }}}N) close to the Al gap ({{{Δ }}}0). At decreasing V g, we observe a reduction of the proximity gap down to {{{Δ }}}N≈ {{{Δ }}}0/2 at NW conductances ∼ 2 {{{e}}}2 {{{h}}}-1, which is interpreted in terms of carrier density dependent reduction of the Al/InAs interface transparency. We demonstrate that the experimental behavior of {{{Δ }}}N is closely reproduced by a model with rectangular potential barrier at the Al/InAs interface.

  10. Interdiffusion in the Mg-Al system and Intrinsic Diffusion in (Al3Mg2) Phase

    SciTech Connect

    Brennan, Sarah; Bermudez, Katrina; Kulkarni, Nagraj S; Sohn, Yong Ho

    2011-01-01

    Increasing use and development of lightweight Mg-alloys have led to the desire for more fundamental research in and understanding of Mg-based systems. As a strengthening component, Al is one of the most important and common alloying elements for Mg-alloys. In this study, solid-to-solid diffusion couple techniques were employed to examine the interdiffusion between pure Mg and Al. Diffusion anneals were carried out at 300 , 350 , and 400 C for 720, 360, and 240 hours, respectively. Optical and scanning electron microscopies (SEM) were employed to observe the formation of the intermetallics -Al12Mg17 and -Al3Mg2, but not -phase. Concentration profiles were determined using X-ray energy dispersive spectroscopy (XEDS). The growth constants and activation energies were determined for each intermetallic phase.

  11. High quality UV AlGaN/AlGaN distributed Bragg reflectors and microcavities

    NASA Astrophysics Data System (ADS)

    Mitrofanov, Oleg; Schmult, S.; Manfra, M. J.; Siegrist, T.; Weimann, N. G.; Sergent, A. M.; Molnar, R. J.

    2007-02-01

    We demonstrate high-reflectivity crack-free Al 0.18Ga 0.82N/Al 0.8Ga 0.2N distributed Bragg reflectors (DBR) and monolithic microcavities grown by molecular beam epitaxy on thick c-axis GaN templates. The elastic strain energy in the epilayer is minimized by compensating the compressive and tensile stress in every period of the DBR structure. A 25 period DBR mirror provides a 26nm-wide stop band centered at 347 nm with the maximum reflectivity higher than 99%. The high-reflectivity DBRs can be used to form high Q-factor monolithic AlGaN/AlGaN microcavities.

  12. 'Abd al-Rahman al-Sufi's 3-Step Magnitude System

    NASA Astrophysics Data System (ADS)

    Hafez, Ihsan; Stephenson, F. Richard; Orchiston, Wayne

    'Abd al-Rahmān al-ūfī's Book of the Fixed Stars dates from around AD 964 and is one of the most important medieval Arabic treatises on astronomy. In this paper we begin with a very brief introduction to the Book of the Fixed Stars. This book contains an extensive star catalogue that lists star coordinates and magnitude estimates for all of the Ptolemaic stars. However, in his book al-hūfī utilized three distinct intermediate magnitude values whereas Ptolemy only mentioned two. We believe that al-hūfī used what we have termed a '3-step intermediate magnitude system,' which is more accurate than Ptolemy's 2-step intermediate system. In this paper we examine in detail the accuracy of this unique 3-step system in comparison with Ptolemy's and modern magnitude values.

  13. Room-Temperature Quantum Ballistic Transport in Monolithic Ultrascaled Al-Ge-Al Nanowire Heterostructures.

    PubMed

    Sistani, Masiar; Staudinger, Philipp; Greil, Johannes; Holzbauer, Martin; Detz, Hermann; Bertagnolli, Emmerich; Lugstein, Alois

    2017-08-09

    Conductance quantization at room temperature is a key requirement for the utilizing of ballistic transport for, e.g., high-performance, low-power dissipating transistors operating at the upper limit of "on"-state conductance or multivalued logic gates. So far, studying conductance quantization has been restricted to high-mobility materials at ultralow temperatures and requires sophisticated nanostructure formation techniques and precise lithography for contact formation. Utilizing a thermally induced exchange reaction between single-crystalline Ge nanowires and Al pads, we achieved monolithic Al-Ge-Al NW heterostructures with ultrasmall Ge segments contacted by self-aligned quasi one-dimensional crystalline Al leads. By integration in electrostatically modulated back-gated field-effect transistors, we demonstrate the first experimental observation of room temperature quantum ballistic transport in Ge, favorable for integration in complementary metal-oxide-semiconductor platform technology.

  14. Fabrication of Fe-Al nanoparticles by selective oxidation of Fe-Al thin films

    NASA Astrophysics Data System (ADS)

    Jang, Pyungwoo; Shin, Seungchan; Jung, Chip-Sup; Kim, Kwang-Ho; Seomoon, Kyu

    2013-04-01

    The possibility of a new technique for fabricating nanoparticles from thin films using selective oxidation in an atmosphere mixture of water vapor and hydrogen was investigated. Fe-5wt.%Al films were RF-sputtered and annealed in the atmosphere mixture at 900°C for up to 200 min, in order to oxidize aluminum selectively. Thermodynamics simulation showed that temperatures exceeding 800°C are necessary to prevent iron from being oxidized, as confirmed by the depth profile of XPS. As the annealing time increased, the morphology of the 200-nm Fe-Al films changed from the continuous to the discontinuous type; thus, particulate Fe-Al films formed after 100 min. The particulate 10- to 100-nm Fe-Al films showed super-paramagnetic behavior after the oxidation. Thus, a new technique for fabricating nanoparticles was successfully introduced using selective oxidation.

  15. Rechargeable Al/Cl2 battery with molten AlCl4/-/ electrolyte.

    NASA Technical Reports Server (NTRS)

    Holleck, G. L.; Giner, J.; Burrows, B.

    1972-01-01

    A molten salt system based on Al- and Cl2 carbon electrodes, with an AlCl3 alkali chloride eutectic as electrolyte, offers promise as a rechargeable, high energy density battery which can operate at a relatively low temperature. Electrode kinetic studies showed that the electrode reactions at the Al anode were rapid and that the observed passivation phenomena were due to the formation at the electrode surface of a solid salt layer resulting from concentration changes on anodic or cathodic current flow. It was established that carbon electrodes were intrinsically active for chlorine reduction in AlCl3-alkali chloride melts. By means of a rotating vitreous carbon disk electrode, the kinetic parameters were determined.

  16. Rechargeable Al/Cl2 battery with molten AlCl4/-/ electrolyte.

    NASA Technical Reports Server (NTRS)

    Holleck, G. L.; Giner, J.; Burrows, B.

    1972-01-01

    A molten salt system based on Al- and Cl2 carbon electrodes, with an AlCl3 alkali chloride eutectic as electrolyte, offers promise as a rechargeable, high energy density battery which can operate at a relatively low temperature. Electrode kinetic studies showed that the electrode reactions at the Al anode were rapid and that the observed passivation phenomena were due to the formation at the electrode surface of a solid salt layer resulting from concentration changes on anodic or cathodic current flow. It was established that carbon electrodes were intrinsically active for chlorine reduction in AlCl3-alkali chloride melts. By means of a rotating vitreous carbon disk electrode, the kinetic parameters were determined.

  17. Local stress-induced effects on AlGaAs/AlOx oxidation front shape

    SciTech Connect

    Chouchane, F.; Almuneau, G. Arnoult, A.; Lacoste, G.; Fontaine, C.; Cherkashin, N.

    2014-07-28

    The lateral oxidation of thick AlGaAs layers (>500 nm) is studied. An uncommon shape of the oxide tip is evidenced and attributed to the embedded stress distribution, inherent to the oxidation reaction. Experimental and numerical studies of the internal strain in oxidized Al{sub x}Ga{sub 1−x}As/GaAs structures were carried out by dark-field electron holography and finite element methods. A mapping of the strain distribution around the AlGaAs/oxide interface demonstrates the main role of internal stress on the shaping of the oxide front. These results demonstrate the high relevance of strain in oxide-confined III-V devices, in particular, with over-500-nm thick AlOx confinement layers.

  18. Ni{sub 3}Al technology transfer

    SciTech Connect

    Sikka, V.K.; Viswanathan, S.; Santella, M.L.

    1997-04-01

    Ductile Ni{sub 3}Al and Ni{sub 3}Al-based alloys have been identified for a range of applications. These applications require the use of material in a variety of product forms such as sheet, plate, bar, wire, tubing, piping, and castings. Although significant progress has been made in the melting, casting, and near-net-shape forming of nickel aluminides, some issues still remain. These include the need for: (1) high-strength castable composition for many applications that have been identified; (2) castability (mold type, fluidity, hot-shortness, porosity, etc.); (3) weld reparability of castings; and (4) workability of cast or powder metallurgy product to sheet, bar, and wire. The four issues listed above can be {open_quotes}show stoppers{close_quotes} for the commercial application of nickel aluminides. This report describes the work completed to address some of these issues during FY 1996.

  19. Ni{sub 3}Al technology transfer

    SciTech Connect

    Sikka, V.K.; Santella, M.L.; Alexander, D.J.

    1995-05-01

    Ductile Ni{sub 3}Al and Ni{sub 3}Al-based alloys have been identified for a range of applications. These applications require the use of material in a variety of product forms such as sheet, plate, bar, tubing, piping, and castings. Although significant progress has been made in the melting, casting, and near-net-shape forming of nickel aluminides, some issues still remain. These include the need for (1)high-strength castable composition for turbochargers, furnace furniture, and hot-die applications; (2) castability (fluidity, hot-shortness, porosity, etc.); (3) weld reparability of castings; and (4) hot fabricability of cast ingots. All of the issues listed above can be {open_quotes}show stoppers{close_quotes} for the commercial application of nickel aluminides. This report describes work completed to address some of these issues during the fourth quarter of FY 1994.

  20. The β-decay of 22Al

    NASA Astrophysics Data System (ADS)

    Achouri, N. L.; de Oliveira Santos, F.; Lewitowicz, M.; Blank, B.; Äystö, J.; Canchel, G.; Czajkowski, S.; Dendooven, P.; Emsallem, A.; Giovinazzo, J.; Guillet, N.; Jokinen, A.; Laird, A. M.; Longour, C.; Peräjärvi, K.; Smirnova, N.; Stanoiu, M.; Thomas, J.-C.

    2006-03-01

    In an experiment performed at the LISE3 facility of GANIL, we studied the decay of 22Al produced by the fragmentation of a 36Ar primary beam. A β-decay half-life of T 1/2 = 91.1±0.5ms was measured. The β-delayed one- and two-proton emission as well as β-α and β-delayed γ-decays were measured and allowed us to establish a partial decay scheme for this nucleus. New levels were determined in the daughter nucleus 22Mg. The comparison with model calculations strongly favours a spin-parity of I π = 4+ for the ground state of 22Al.

  1. Observable Proxies For 26 Al Enhancement

    SciTech Connect

    Fryer, Christopher L; Young, Patrick A; Ellinger, Carola I; Arnett, William D

    2008-01-01

    We consider the cospatial production of elements in supernova explosions to find observationally detectable proxies for enhancement of {sup 26}Al in supernova ejecta and stellar systems. Using four progenitors we explore a range of 1D explosions at different energies and an asymmetric 3D explosion. We find that the most reliable indicator of the presence of {sup 26}Al in unmixed ejecta is a very low S/Si ratio ({approx} 0.05). Production of N in O/S/Si-rich regions is also indicative. The biologically important element P is produced at its highest abundance in the same regions. Proxies should be detectable in supernova ejecta with high spatial resolution multi wavelength observations, but the small absolute abundance of material injected into a proto-planetary disk makes detection unlikely in existing or forming stellar/planetary systems.

  2. DFT study of Al doped armchair SWCNTs

    SciTech Connect

    Dhiman, Shobhna; Rani, Anita; Kumar, Ranjan; Dharamvir, Keya

    2016-05-23

    Electronic properties of endohedrally doped armchair single-walled carbon nanotubes (SWCNTs) with a chain of six Al atoms have been studied using ab-initio density functional theory. We investigate the binding energy/atom, ionization potential, electron Affinity and Homo-Lumo gap of doped armchair SWNTs from (4,4) to (6,6) with two ends open. BE/dopant atom and ionization potential is maximum for (6, 6) doped armchair carbon nanotube; suggest that it is more stable than (4, 4) and (5, 5) doped tubes. HOMO - LUMO gap of Al doped arm chair carbon nanotubes decreases linearly with the increase in diameter of the tube. This shows that confinement induce a strong effect on electronic properties of doped tubes. These combined systems can be used for future nano electronics. The ab–initio calculations were performed with SIESTA code using generalized gradient approximation (GGA).

  3. Development of SiAlON materials

    NASA Technical Reports Server (NTRS)

    Layden, G. K.

    1979-01-01

    Cold pressing and sintering techniques were used to produce ceramic test specimens in which the major phase was either Si3N4 or a solid solution having the beta Si3N4 structure. Additional components were incorporated to promote liquid phase sintering. Glass and/or crystalline phase were consequently retained in boundaries between Si3N4 grains which largely determined the physical properties of the bodies. Systems investigated most extensively included R-Si-Al-O-N (R = rare earth element) Zr-Si-Al-O-N, Y-Si-Be-O-N, and R1-R2-Si-O-N. Room temperature and 1370 C modulus of ruptured, 1370 C creep, and oxidation behavior are discussed in terms of phase relationships in a parent quinery, and relavent oxide systems.

  4. Impact of superbends at the ALS

    SciTech Connect

    Nishimura, H.; Robin, D.

    1999-03-19

    To satisfy a demand for high energy, high brightness x-ray sources at the Advanced Light Source (ALS), a plan is in place to replace three 1.3 Tesla normal conducting bending magnets with three 5 Tesla superconducting magnets (superbends) in the year 2001. In this paper they discuss the impact of the superbends on the ALS beam parameters and particle dynamics. In particular they show the effect on the emittance, energy spread, and lifetime. They find that by adjusting the dispersion to be positive in the straight section they are able to largely restore the horizontal emittance. The vertical emittance can be adjusted independently to control the lifetime. The particle dynamics are investigated through particle tracking with a frequency analysis postprocessor. They find that by placing the three superbends symmetrically around the ring there is ample dynamic aperture for injection and lifetime.

  5. Forging of FeAl intermetallic compounds

    SciTech Connect

    Flores, O.; Juarez, J.; Campillo, B.; Martinez, L.; Schneibel, J.H.

    1994-09-01

    Much activity has been concentrated on the development of intermetallic compounds with the aim of improving tensile ductility, fracture toughness and high notch sensitivity in order to develop an attractive combination of properties for high and low temperature applications. This paper reports experience in processing and forging of FeAl intermetallic of B2 type. During the experiments two different temperatures were employed, and the specimens were forged after annealing in air, 10{sup {minus}2} torr vacuum and argon. From the results it was learned that annealing FeAl in argon atmosphere prior to forging resulted in better deformation behavior than for the other two environments. For the higher forging temperature used in the experiments (700C), the as-cast microstructure becomes partially recrystallized.

  6. Investigation of Phase Equilibria and Some Properties of Alloys of Ti-Al-Fe and Ti-Al-V Systems,

    DTIC Science & Technology

    Some data on the structure and properties of Ti-Al-Fe alloys are presented. The phase equilibria in alloys in the system Ti-Al-V were studies...However, the data available in the literature on phase equilibria in the systems Ti-Al-Fe and Ti-Al-V require refinement, as they are insufficiently

  7. Bulk Al-Al3Zr composite prepared by mechanical alloying and hot extrusion for high-temperature applications

    NASA Astrophysics Data System (ADS)

    Pourkhorshid, E.; Enayati, M. H.; Sabooni, S.; Karimzadeh, F.; Paydar, M. H.

    2017-08-01

    Bulk Al/Al3Zr composite was prepared by a combination of mechanical alloying (MA) and hot extrusion processes. Elemental Al and Zr powders were milled for up to 10 h and heat treated at 600°C for 1 h to form stable Al3Zr. The prepared Al3Zr powder was then mixed with the pure Al powder to produce an Al-Al3Zr composite. The composite powder was finally consolidated by hot extrusion at 550°C. The mechanical properties of consolidated samples were evaluated by hardness and tension tests at room and elevated temperatures. The results show that annealing of the 10-h-milled powder at 600°C for 1 h led to the formation of a stable Al3Zr phase. Differential scanning calorimetry (DSC) results confirmed that the formation of Al3Zr began with the nucleation of a metastable phase, which subsequently transformed to the stable tetragonal Al3Zr structure. The tension yield strength of the Al-10wt%Al3Zr composite was determined to be 103 MPa, which is approximately twice that for pure Al (53 MPa). The yield stress of the Al/Al3Zr composite at 300°C is just 10% lower than that at room temperature, which demonstrates the strong potential for the prepared composite to be used in high-temperature structural applications.

  8. Structure and ductility of TiAl

    SciTech Connect

    Imayev, R.; Salishchev, G.; Imayev, V.; Shagiev, M.; Kuznetzov, A.

    1995-12-31

    The effect of structural factors (grain size and grain boundary structure) and strain rate on the deformation mechanism and ductility of TiAl in the temperature range of brittle-to-ductile transition and at room temperature was systematically investigated. It has been established that it is possible to substantially affect the deformation mechanism and ductility of this intermetallic by controlling structural factors, particularly the grain size, and varying the strain rate.

  9. Methodological comments: McFarlane et al.

    PubMed

    Kraemer, Helena Chmura

    2015-01-01

    Does the McFarlane et al study provide a model for practical trials? Unfortunately, not. The methodological problems are here reviewed and used as a springboard to set out methodological criteria that might define such a model. © The Author 2014. Published by Oxford University Press on behalf of the Maryland Psychiatric Research Center. All rights reserved. For permissions, please email: journals.permissions@oup.com.

  10. Al Qaeda as a Charismatic Phenomenon

    DTIC Science & Technology

    2009-06-01

    QUESTIONS Scholars’ frequent use of the concept of charisma in the study of social revolutions, terrorist, and insurgent movements gives rise to the...frequent use of charisma to explain collective behavior in the study of social revolutions, terrorist, and insurgent movements gives rise to the thesis...that Osama bin Laden has used his ability to finance or bankroll terrorist operations as a means to exercise control in Al Qaeda.204 In fact, Rolland

  11. Psychosocial adjustment to ALS: a longitudinal study.

    PubMed

    Matuz, Tamara; Birbaumer, Niels; Hautzinger, Martin; Kübler, Andrea

    2015-01-01

    For the current study the Lazarian stress-coping theory and the appendant model of psychosocial adjustment to chronic illness and disabilities (Pakenham, 1999) has shaped the foundation for identifying determinants of adjustment to ALS. We aimed to investigate the evolution of psychosocial adjustment to ALS and to determine its long-term predictors. A longitudinal study design with four measurement time points was therefore, used to assess patients' quality of life, depression, and stress-coping model related aspects, such as illness characteristics, social support, cognitive appraisals, and coping strategies during a period of 2 years. Regression analyses revealed that 55% of the variance of severity of depressive symptoms and 47% of the variance in quality of life at T2 was accounted for by all the T1 predictor variables taken together. On the level of individual contributions, protective buffering, and appraisal of own coping potential accounted for a significant percentage in the variance in severity of depressive symptoms, whereas problem management coping strategies explained variance in quality of life scores. Illness characteristics at T2 did not explain any variance of both adjustment outcomes. Overall, the pattern of the longitudinal results indicated stable depressive symptoms and quality of life indices reflecting a successful adjustment to the disease across four measurement time points during a period of about two years. Empirical evidence is provided for the predictive value of social support, cognitive appraisals, and coping strategies, but not illness parameters such as severity and duration for adaptation to ALS. The current study contributes to a better conceptualization of adjustment, allowing us to provide evidence-based support beyond medical and physical intervention for people with ALS.

  12. Psychosocial adjustment to ALS: a longitudinal study

    PubMed Central

    Matuz, Tamara; Birbaumer, Niels; Hautzinger, Martin; Kübler, Andrea

    2015-01-01

    For the current study the Lazarian stress-coping theory and the appendant model of psychosocial adjustment to chronic illness and disabilities (Pakenham, 1999) has shaped the foundation for identifying determinants of adjustment to ALS. We aimed to investigate the evolution of psychosocial adjustment to ALS and to determine its long-term predictors. A longitudinal study design with four measurement time points was therefore, used to assess patients' quality of life, depression, and stress-coping model related aspects, such as illness characteristics, social support, cognitive appraisals, and coping strategies during a period of 2 years. Regression analyses revealed that 55% of the variance of severity of depressive symptoms and 47% of the variance in quality of life at T2 was accounted for by all the T1 predictor variables taken together. On the level of individual contributions, protective buffering, and appraisal of own coping potential accounted for a significant percentage in the variance in severity of depressive symptoms, whereas problem management coping strategies explained variance in quality of life scores. Illness characteristics at T2 did not explain any variance of both adjustment outcomes. Overall, the pattern of the longitudinal results indicated stable depressive symptoms and quality of life indices reflecting a successful adjustment to the disease across four measurement time points during a period of about two years. Empirical evidence is provided for the predictive value of social support, cognitive appraisals, and coping strategies, but not illness parameters such as severity and duration for adaptation to ALS. The current study contributes to a better conceptualization of adjustment, allowing us to provide evidence-based support beyond medical and physical intervention for people with ALS. PMID:26441696

  13. An Al Qaeda Way of War

    DTIC Science & Technology

    2012-05-17

    information on water supply and wastewater management practices in the U.S. and abroad. There has also been interest in insecticides and pest control ...no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control ...members have sought information on Supervisory Control and Data Acquisition systems available on multiple web sites. [Al Qaeda] specifically sought

  14. Hypermetabolism as a Risk Factor for ALS

    DTIC Science & Technology

    2012-07-01

    4 Introduction Amyotrophic Lateral Sclerosis (ALS), a neurodegenerative disorder characterized by the progressive loss of motor...Gonzalez de Aguilar JL, & Loeffler JP: Evidence for defective energy homeostasis in amyotrophic lateral sclerosis : benefit of a high-energy diet in a...and supplements in amyotrophic lateral sclerosis and other neurodegenerative disorders. Curr Opin Clin Nutr Metab Care 6:631- 43, 2002. 8. Lagier

  15. Hypermetabolism as a Risk Factor for ALS

    DTIC Science & Technology

    2013-09-01

    Ubiquitinated TDP-43 in frontotemporal lobar degeneration and amyotrophic lateral sclerosis . Science 314, 130–133 (2006). 2. Weihl, C. C. et al. TDP-43...body fat, likely working through a protein called Tbc1d1 which is known to control fat metabolism in skeletal muscle . To test this hypothesis, we...generated conditional Tdp-43 knockout mice using a muscle -specific (MLC) driver of Cre recombinase. Loss of Tdp-43 in skeletal muscle led to adult onset

  16. Al Kazim Water Supply, Nassriya, Iraq

    DTIC Science & Technology

    2008-07-23

    water network a perimeter fence Project Assessment Objectives. The objective of this project assessment was to provide real-time information...network connecting to the existing water network . To date, the Al Kazim Water Supply project results are consistent with the original contract...treatment plant, an above ground storage reservoir, a pipe network connecting to the existing water network , and an approximately 160 linear meter

  17. Al Ager Water Compact Unit, Nassriya, Iraq

    DTIC Science & Technology

    2008-07-22

    plant was to contain a reverse osmosis unit, an above-ground storage reservoir, a pipe network connecting to the existing water network , and a...the existing water network , and a perimeter fence for the new facility. To date, the Al Ager Water Compact Unit project results are consistent with...of 110 millimeter (mm) polyvinyl chloride (PVC), connection to the existing water network , and a perimeter fence measuring approximately 50-m x 30-m

  18. Neutron spectroscopy of γ-AlH3

    NASA Astrophysics Data System (ADS)

    Kolesnikov, Alexander; Graetz, Jason; Jensen, Craig; Langley, Walker; Antonov, Vladimir

    2009-03-01

    The density of vibrational states, G(E), for γ-AlH3 is measured by inelastic neutron scattering. The obtained spectrum noticeably differs from that of α-AlH3, because α-AlH3 has a structure built of corner-sharing AlH6 octahedra, while the γ-AlH3 is composed of both corner- and edge-sharing AlH6 octahedra. The first acoustic phonon peak in the G(E) of γ-AlH3 appears at a lower energy and the band of translational modes extends to higher energies (55 vs. 42 meV) than in the spectrum of α-AlH3. The bands of Al-H bending modes are observed at about the same energies of 60--140 meV in γ-AlH3 and α-AlH3, only the structures of the bands are different. The Al-H stretching modes in the γ-phase show eight peaks in the range 145 to 265 meV, while in the α-phase they exhibits only two peaks at 200 and 235 meV. The G(E) spectrum of γ-AlH3 is in good agreement with recent simulations [Y. Wang et al., Phys. Rev. B 77 (2008) 014101], which took into account the existence of a unique double-bridge bond between certain Al and H atoms.

  19. Transmission electron microscopy studies of squeeze cast Al-AlN composites.

    PubMed

    Chédru, M.; Vicens, J.; Chermant, J. L.; Mordike, B. L.

    2001-02-01

    Aluminium-matrix composites containing approximately 45 vol.% AlN particles were fabricated by melt infiltration of aluminium into an AlN preform under a pressure up to 130 MPa. Three types of aluminium alloy (2024, 6060 and 5754) were used. The as-prepared composites were studied by light microscopy, scanning and transmission electron microscopies, and energy-dispersive X-ray spectroscopy. As a result of the melt infiltration process, the composites are very dense and the microstructure shows a homogeneous distribution of the reinforcement. The interfaces are clean with very little porosity. Composites with 2024 and 6060 matrices were carefully studied by transmission electron microscopy (TEM) and high resolution electron microscopy (HREM) after heat treatments. Dislocation density in the matrix of the reinforced material increases due to the difference in thermal expansion coefficients of aluminium alloys and AlN. This can induce an accelerated ageing response of the coherent and semicoherent precipitations of age-hardened matrices. This behaviour has been studied in the 2024 and 6060 composites by using microhardness measurements and TEM. Reactions between the AlN reinforcement and aluminium matrices (6060 and 5754) were observed and analysed by TEM. Matrices containing some of magnesium display a MgAl2O4 spinel formation at the AlN/matrix interface. The spinel formation is probably due to the reaction between magnesium of the matrix and the thin Al2O3 layer on the AlN surfaces. This reaction can affect the mechanical behaviour of the composite infiltrated with the 5754 matrix. This has been confirmed by overageing some samples at high temperatures (300 degrees C and 550 degrees C) for 10 days in order to emphasize the interfacial reactions.

  20. Toughening mechanisms in Al/Al-SiC laminated metal composites

    SciTech Connect

    Lesuer, D.R.; Wadsworth, J.; Riddle, R.A.; Syn, C.K.; Lewandowski, J.J.; Hunt, W.H. Jr.

    1996-12-31

    The fracture toughness of laminated metal composites consisting of alternating layers of a metal matrix composite (Al6090/SiC/25p) and a monolithic aluminum alloy (Al5182) has been studied as a function of the volume fraction of the component materials. Finite element simulations of the fracture toughness tests have been used to study the mechanisms of crack growth and extrinsic toughening. The mechanisms responsible for toughening in laminated metal composites are described.

  1. Structure and mechanical behavior of Al-Al4C3 composites

    NASA Astrophysics Data System (ADS)

    Kulkov, S. N.; Vorozhtsov, S. A.

    2011-04-01

    Results obtained from an x-ray phase analysis and mechanical tests on compression of hot-pressed Al-Al 4 C 3 composites with 5 or 10 wt.% C added to the initial powder mixture are presented. It is shown that the higher is the amount of aluminum carbide formed under hot pressing, the higher are the yield stress and the effective elastic modulus of the composite.

  2. Three-Dimensional FIB/EBSD Characterization of Irradiated HfAl3-Al Composite

    SciTech Connect

    Hua, Zilong; Guillen, Donna Post; Harris, William; Ban, Heng

    2016-09-01

    A thermal neutron absorbing material, comprised of 28.4 vol% HfAl3 in an Al matrix, was developed to serve as a conductively cooled thermal neutron filter to enable fast flux materials and fuels testing in a pressurized water reactor. In order to observe the microstructural change of the HfAl3-Al composite due to neutron irradiation, an EBSD-FIB characterization approach is developed and presented in this paper. Using the focused ion beam (FIB), the sample was fabricated to 25µm × 25µm × 20 µm and mounted on the grid. A series of operations were carried out repetitively on the sample top surface to prepare it for scanning electron microscopy (SEM). First, a ~100-nm layer was removed by high voltage FIB milling. Then, several cleaning passes were performed on the newly exposed surface using low voltage FIB milling to improve the SEM image quality. Last, the surface was scanned by Electron Backscattering Diffraction (EBSD) to obtain the two-dimensional image. After 50 to 100 two-dimensional images were collected, the images were stacked to reconstruct a three-dimensional model using DREAM.3D software. Two such reconstructed three-dimensional models were obtained from samples of the original and post-irradiation HfAl3-Al composite respectively, from which the most significant microstructural change caused by neutron irradiation apparently is the size reduction of both HfAl3 and Al grains. The possible reason is the thermal expansion and related thermal strain from the thermal neutron absorption. This technique can be applied to three-dimensional microstructure characterization of irradiated materials.

  3. Energetic ion bombarded Fe/Al multilayers

    SciTech Connect

    Al-Busaidy, M.S.; Crapper, M.D.

    2006-05-15

    The utility of ion-assisted deposition is investigated to explore the possibility of counteracting the deficiency of back-reflected current of Ar neutrals in the case of lighter elements such as Al. A range of energetically ion bombarded Fe/Al multilayers sputtered with applied surface bias of 0, -200, or -400 V were deposited onto Si(111) substrates in an argon atmosphere of 4 mTorr using a computer controlled dc magnetron sputtering system. Grazing incidence reflectivity and rocking curve scans by synchrotron x rays of wavelength of 1.38 A were used to investigate the structures of the interfaces produced. Substantial evidence has been gathered to suggest the gradual suppression of interfacial mixing and reduction in interfacial roughness with increases of applied bias. The densification of the Al microstructure was noticeable and may be a consequence of resputtering attributable to the induced ion bombardment. The average interfacial roughnesses were calculated for the 0, -200, and -400 V samples to be 7{+-}0.5, 6{+-}0.5, and 5{+-}0.5 A respectfully demonstrating a 30% improvement in interface quality. Data from rocking curve scans point to improved long-range correlated roughness in energetically deposited samples. The computational code based on the recursive algorithm developed by Parratt [Phys. Rev. 95, 359 (1954)] was successful in the simulation of the specular reflectivity curves.

  4. Dielectronic Recombination of Al-Like Ions

    NASA Astrophysics Data System (ADS)

    Abdel-Naby, Shahin; Nikolic, Dragan; Gorczyca, Thomas W.; Badnell, Nigel R.; Savin, Daniel W.

    2008-05-01

    Accurate dielectronic recombination (DR) data are important for cosmic and laboratory plasma modeling. Over the past few years, our group has computed reliable DR data for all isoelectronic sequences up through Mg-like ions. Recently, we have focused our work on the complex third-row M-shell isoelectronic sequences, especially Al-like. Previous calculations for the DR rate coefficient for S^3+ were performed only within a non-relativistic LS-coupling approximation. Fe^13+ DR calculations, including semi-relativistic effects, have been completed and tested against the Heidelberg heavy-ion Test Storage Ring facility measurements. Here we present semi-relativistic DR rate coefficient calculations for a wide range of Al-like ions using AUTOSTRUCTURE, a level-resolved distorted-wave program package. The important effect of fine structure splitting in the Al-like ground state will be discussed. Finally, our results are fitted into a simple formula for use by astrophysical plasma modelers.This work was funded in part by NASA (APRA), NASA (SHP) SR&T, and UK PPARC grants.

  5. Diet and dietetics in al-Andalus.

    PubMed

    Salas-Salvadó, Jordi; Huetos-Solano, Maria D; García-Lorda, Pilar; Bulló, Mònica

    2006-08-01

    Al-Andalus society (711-1492) based its idea of health on the wisdom of Classical Greece, the Hippocratic-Galenic theories, as well as the Persian and Hindu cultures. The twelfth century in al-Andalus is considered to be the most prolific period for works of a scientific and technical nature. At the time, the main treatises on dietetics were written and this science reached its widest expression with such leading figures as Ibn Wāfīd, Avenzoar, Averroes and Maimonides, whose works revealed the first scientific knowledge on the nutritional processes of the human body. Diet was regarded as being essential for health and the prevention of disease. Dietary guidelines were written for different age groups, different body types and different seasons of the year. The amount of food to be ingested, the number of meals recommended and the order in which the food should be consumed were all issues that were discussed. A variety of foods were thought to have medicinal properties, some of which are known today. The diet in al-Andalus was varied and very probably made a substantial contribution to the origin of the present-day Mediterranean diet, rich in olive oil, wholemeal cereals, fruit and vegetables, fish, lamb, poultry, nuts and spices. We also find that many of the terms in current use in diet and agriculture are a living testimony to the Arabic influence, as are many of the dishes of our varied Mediterranean gastronomy.

  6. KCAT, Xradia, ALS and APS Performance Summary

    SciTech Connect

    Waters, A; Martz, H; Brown, W

    2004-09-30

    At Lawrence Livermore National Laboratory (LLNL) particular emphasis is being placed on the nondestructive characterization (NDC) of components, subassemblies and assemblies of millimeter-size extent with micrometer-size features (mesoscale). These mesoscale objects include materials that vary widely in composition, density, geometry and embedded features. Characterizing these mesoscale objects is critical for corroborating the physics codes that underlie LLNL's Stockpile Stewardship mission. In this report we present results from our efforts to quantitatively characterize the performance of several x-ray systems in an effort to benchmark existing systems and to determine which systems may have the best potential for our mesoscale imaging needs. Several different x-ray digital radiography (DR) and computed tomography (CT) systems exist that may be applicable to our mesoscale object characterization requirements, including microfocus and synchrotron systems. The systems we have benchmarked include KCAT (LLNL developed) and Xradia {mu}XCT (Xradia, Inc., Concord, CA), both microfocus systems, and Beamline 1-ID at the Advance Photon Source (APS) and the Tomography Beamline at the Advanced Light Source (ALS), both synchrotron based systems. The ALS Tomography Beamline is a new installation, and the data presented and analyzed here is some of the first to be acquired at the facility. It is important to note that the ALS system had not yet been optimized at the time we acquired data. Results for each of these systems has been independently documented elsewhere. In this report we summarize and compare the characterization results for these systems.

  7. Microplastic flow in SIC/AL composites

    SciTech Connect

    Shi, N.; Arsenault, R.J.

    1995-12-31

    Experimentally it has been determined that if a composite containing a reinforcement which has a different (in general lower) thermal coefficient of expansion as compared to the matrix, then upon cooling from the processing or annealing temperature, plastic relaxation of the misfit strain will occur. Also, experimentally it has been shown that as the size of the reinforcement is increased, i.e., from small spheres to large spheres, there is a decrease in the summation of the effective plastic strain in the matrix. In other words there is a decrease in the average dislocation density in the matrix. However, if the shape of the reinforcement is changed from spherical to short fiber to continuous filament, then the dislocation density increases. This experimental data is obtained at a constant volume fraction. A very simple model of plastic relaxation based on prismatic punching of dislocations from the interface can account for the decrease in the dislocation density with an increase reinforcement size, and the increase in dislocation density when changing the shape from a sphere to a continuous filament. A FEM analysis of the shape factor is also capable of predicting the correct trend. However, at present the continuum mechanics methods that have been investigated can not predict the size dependence. A simple model to explain the size effect in Al{sub 2}O{sub 3}/NiAl composites based on the deformation characteristics of NiAl will be discussed.

  8. Lower motor neuron dysfunction in ALS.

    PubMed

    de Carvalho, Mamede; Swash, Michael

    2016-07-01

    In the motor system there is a complex interplay between cortical structures and spinal cord lower motor neurons (LMN). In this system both inhibitory and excitatory neurons have relevant roles. LMN loss is a marker of motor neuron disease/amyotrophic lateral sclerosis (MND/ALS). Conventional needle electromyography (EMG) does not allow LMN loss to be quantified. Measurement of compound muscle action potential (CMAP) amplitude or area, and the neurophysiological index, provide a surrogate estimate of the number of functional motor units. Increased motor neuronal excitability is a neurophysiological marker of ALS in the context of a suspected clinical and electrophysiological diagnosis. In the LMN system, fasciculation potentials (FPs) are the earliest changes observed in affected muscles, a feature of LMN hyperexcitability. Reinnervation is best investigated by needle EMG although other methods can be explored. Moreover needle EMG give information about the temporal profile of the reinnervation process, important ancillary data. Quantitative motor unit potential analysis is a valuable method of evaluating reinnervation. The importance of FPs has been recognized in the Awaji criteria for the electrodiagnosis of ALS, criteria that are a sensitive adjunct to the revised El Escorial criteria. Finally, functionality of LMN's, and perhaps excitability studies in motor nerves, aids understanding of the disease process, allowing measurement of potential treatment effects in clinical trials. Other investigational techniques, such as electrical impedance myography, muscle and nerve ultrasound, and spinal cord imaging methods may prove useful in future. Copyright © 2016 International Federation of Clinical Neurophysiology. Published by Elsevier Ireland Ltd. All rights reserved.

  9. AlN antiresonant layer ARROW waveguides

    NASA Astrophysics Data System (ADS)

    Pelegrini, M. V.; Carvalho, D. O.; Alayo, M. I.; Pereyra, I.

    2010-02-01

    Aluminum Nitride (AlN) is a wide band gap III-V semiconductor material often used for optical applications due to its transparency and high refractive index. We have produced and characterized AlN thin films by reactive r.f. magnetron sputtering in different Ar-N2 atmospheres in order to verify the best gaseous concentration to be utilized as anti-resonant layer in ARROW waveguides. The corresponding films were characterized by Fourier transform infrared spectroscopy (FTIR), Rutherford backscattering spectroscopy (RBS), Ellipsometry and visible optical absorption. The AlN properties did not varied significantly between the films deposited with 20 and 70 sccm of N2, most of the variations occurred for films deposited with 18 sccm of N2 or below. The film deposited with 20 sccm was selected to be used as the first ARROW layer in the fabricated waveguides. Two routines were used to design the waveguides parameters, the transfer matrix method (TMM) and the semi-vectorial non-uniform finite difference method (NU-FDM). Attenuation as low as 3.5dB/cm was obtained for a 7 μm wide waveguide.

  10. An ALS (Advanced Light Source) handbook

    SciTech Connect

    Not Available

    1988-11-01

    This booklet aims to provide the prospective user of the Advanced Light Source with a concise description of the radiation a researcher might expect at his or her experimental station. The focus is therefore on the characteristics of the light that emerges from insertion devices and bending magnets and on how components of the beam lines further alter the properties of the radiation. The specifications and operating parameters of the ALS injection system and storage ring are of only peripheral interest. To this end, Sections 3 and 5 and most of Section 4 are devoted to summary presentations, by means of performance plots and tabular compilations, of radiation characteristics at the ALS--spectral brightness, flux, coherent power, resolution, time structure, etc.--assuming a representative set of four undulators and one wiggler and a corresponding set of five beam lines. As a complement to these performance summaries, Section 1 is a general introductory discussion of synchrotron radiation and the ALS, and Section 2 provides a compendious introduction to the characteristics of synchrotron radiation from bending magnets, wigglers, and undulators. In addition, Section 4 briefly introduces the theory of diffraction grating and crystal monochromators. 15 refs., 28 figs., 5 tabs.

  11. Room Temperature Radiolytic Synthesized Cu@CuAlO2-Al2O3 Nanoparticles

    PubMed Central

    Abedini, Alam; Saion, Elias; Larki, Farhad; Zakaria, Azmi; Noroozi, Monir; Soltani, Nayereh

    2012-01-01

    Colloidal Cu@CuAlO2-Al2O3 bimetallic nanoparticles were prepared by a gamma irradiation method in an aqueous system in the presence of polyvinyl pyrrolidone (PVP) and isopropanol respectively as a colloidal stabilizer and scavenger of hydrogen and hydroxyl radicals. The gamma irradiation was carried out in a 60Co gamma source chamber with different doses up to 120 kGy. The formation of Cu@CuAlO2-Al2O3 nanoparticles was observed initially by the change in color of the colloidal samples from colorless to brown. Fourier transform infrared spectroscopy (FTIR) confirmed the presence of bonds between polymer chains and the metal surface at all radiation doses. Results of transmission electron microscopy (TEM), energy dispersive X-ray spectrometry (EDX), and X-ray diffraction (XRD) showed that Cu@CuAlO2-Al2O3 nanoparticles are in a core-shell structure. By controlling the absorbed dose and precursor concentration, nanoclusters with different particle sizes were obtained. The average particle diameter increased with increased precursor concentration and decreased with increased dose. This is due to the competition between nucleation, growth, and aggregation processes in the formation of nanoclusters during irradiation. PMID:23109893

  12. Softening Kinetics in High Al and High Al-Nb-Microalloyed Steels

    NASA Astrophysics Data System (ADS)

    Pereda, B.; Aretxabaleta, Z.; López, B.

    2015-03-01

    Double-hit torsion tests were performed in order to study the effect of high Al levels (up to 2 wt.%) and Nb microalloying (up to 0.07 wt.%) on the static softening kinetics of 0.2%C-2%Mn steels. The addition of 1%Al leads to a delay in the softening kinetics due to solute-drag effect, equivalent to that exerted by 0.027%Nb. For the 2%Al steels, at temperatures below 1000 °C, γ → α phase transformation occurs after deformation, resulting in a larger retardation of the softening kinetics. At temperatures higher than 1000 °C, Nb in solid solution also contributes to the retardation of the static softening kinetics, and at lower temperatures NbC strain-induced precipitation leads to incomplete softening for the 1%Al steel, and to a complex interaction between softening, phase transformation, and NbC strain-induced precipitation for the 2%Al-Nb steels. The effect of Al on the static softening kinetics was quantified and introduced in a model developed in previous works for the prediction of the austenite microstructural evolution. In order to validate the results of the model, multipass torsion tests were carried out at conditions representative of hot strip and plate rolling mills. Model predictions show reasonable agreement with the results obtained at different deformation conditions.

  13. Internal photoemission in Ag-Al2O3-Al junctions

    NASA Technical Reports Server (NTRS)

    Guedes, J. M. P.; Slayman, C. W.; Gustafson, T. K.; Jain, R. K.

    1979-01-01

    The magnitude of the photon-induced current in Ag-Al2O3-Al metal-oxide-metal junctions has been studied as a function of photon energy and angle of incident radiation. Photocurrents were theoretically analyzed on the basis of a modified vacuum photoemission model (Jain, 1975; Slayman et al., to be published). Optical constants previously reported in the literature (Irani et al., 1971; Ehnrereich et al., 1963) were used to calculate the true spatial generation rate in Ag and Al as a function of the angle, polarization of incident radiation, and film thickness. Results were found to be in very good agreement with experimentally determined values for a tunable dye laser with a KDP doubling crystal pumped by a Q-switched Nd:YAG laser with a LiIO3 doubling crystal. The system provided risetimes of 50 ns or less and peak powers of 10 W. Under short circuit conditions, the photoresponse to incident power was linear up to available power densities of 10 kW/sq cm. Quantum efficiencies of about 0.1% at zero-bias, near 3.8 eV under P polarization, were typically observed.

  14. Redistribution of Ti and Al in deuterium charged TiAl

    NASA Technical Reports Server (NTRS)

    Legzdina, D.; Robertson, I. M.; Birnbaum, H. K.

    1992-01-01

    The redistribution of titanium and aluminum in a single-phase TiAl alloy that has been exposed to a high pressure of deuterium gas at high temperature is studied. The microstructure in the as-received, uncharged condition consisted of single-phase gamma TiAl grains and a random distribution of precipitates. Precipitates were distributed throughout the matrix and along the grain boundaries. The chemistry of the precipitates varied considerably; some were rich in Al, while other were mostly Ti with some Si and Al. The dislocation density in most grains was low, although in a few grains a high dislocation density was observed. FCC deuterides with a lattice parameter of 0.45 nm form in a Ti-52.1Al-2.1Ta (at. pct) alloy after exposure to 1.38 MPa of deuterium gas at 650 C for 213 hr. The structure and lattice parameter are consistent with the formation of Ti(l)D2. The deuterides that form in this alloy are enriched in Ti and deficient in Al and Ta compared to the deuteride-free matrix. Regions of the matrix contiguous with the deuterides have a correspondingly enhanced aluminum and tantalum concentration.

  15. Redistribution of Ti and Al in deuterium charged TiAl

    NASA Technical Reports Server (NTRS)

    Legzdina, D.; Robertson, I. M.; Birnbaum, H. K.

    1992-01-01

    The redistribution of titanium and aluminum in a single-phase TiAl alloy that has been exposed to a high pressure of deuterium gas at high temperature is studied. The microstructure in the as-received, uncharged condition consisted of single-phase gamma TiAl grains and a random distribution of precipitates. Precipitates were distributed throughout the matrix and along the grain boundaries. The chemistry of the precipitates varied considerably; some were rich in Al, while other were mostly Ti with some Si and Al. The dislocation density in most grains was low, although in a few grains a high dislocation density was observed. FCC deuterides with a lattice parameter of 0.45 nm form in a Ti-52.1Al-2.1Ta (at. pct) alloy after exposure to 1.38 MPa of deuterium gas at 650 C for 213 hr. The structure and lattice parameter are consistent with the formation of Ti(l)D2. The deuterides that form in this alloy are enriched in Ti and deficient in Al and Ta compared to the deuteride-free matrix. Regions of the matrix contiguous with the deuterides have a correspondingly enhanced aluminum and tantalum concentration.

  16. A comparative wear study on Al-Li and Al-Li/SiC composite

    SciTech Connect

    Okumus, S. Cem Karslioglu, Ramazan Akbulut, Hatem

    2013-12-16

    Aluminum-lithium based unreinforced (Al-8090) alloy and Al-8090/SiCp/17 vol.% metal matrix composite produced by extrusion after spray co-deposition. A dry ball-on disk wear test was carried out for both alloy and composite. The tests were performed against an Al{sub 2}O{sub 3} ball, 10 mm in diameter, at room temperature and in laboratory air conditions with a relative humidity of 40-60%. Sliding speed was chosen as 1.0 ms{sup −1} and normal loads of 1.0, 3.0 and 5.0 N were employed at a constant sliding distance of 1000 m. The wear damage on the specimens was evaluated via measurement of wear depth and diameter. Microstructural and wear characterization was carried out via scanning electron microscopy (SEM). The results showed that wear loss of the Al-8090/SiC composite was less than that of the Al-8090 matrix alloy. Plastic deformation observed on the wear surface of the composite and the matrix alloy, and the higher the applied load the greater the plastic deformation. Scanning electron microscopy examinations of wear tracks also reveal that delamination fracture was the dominant wear mechanism during the wear progression. Friction coefficient was maximum at the low applied load in the case of the Al-8090/SiC composite while a gradual increase was observed with applied load for the matrix alloy.

  17. Evaluation of aerial microbial pollutants in Al-Haram Al-Nabawi during pilgrimage of 2013.

    PubMed

    Alananbeh, Kholoud M; Boquellah, Nahla; Kaff, Nadia Al; Ahmadi, Majid Al

    2017-01-01

    Al-Madinah Al-Munawwarah is the second holiest site in Islam. The possibility of new emerging microbes is valid due to the increased number of pilgrims. The objectives of the current study were to estimate the numbers of fungi and bacteria inside and outside Al-Haram Al-Nabawi and to find whether new bacterial and fungal species have emerged compared to previous studies. Air samples were collected twice a day from 12 spots and four directions during the pilgrim year of 2013 for four consecutive weeks by using the sedimentation method. Thirty five genera and fifty eight species were identified. The most recovered bacterial genera were Staphylococcus, Micrococcus, Bacillus, and Dermacoccus with 32.47%, 18.18%, 12.85%, and 11.23%, respectively. Fifty nine isolates of fungi were molecularly identified. Aspergillus species had the highest percentage (78%). The other fungal genera identified (Alternaria triticina, Emericella nidulans, Emericella striata, Mucor circinelloides, Penicillium chrysogenum, Penicillium minioluteum, Rhizopus arrhizus, Rhizopus oryzae, and Syncephalastrum racemosum) had less than 5% frequency. In places such as Al-Haram Al-Nabawi, a large and crowded public (millions) exist especially during pilgrimages and Ramadan, thus, exposure to microorganisms is high. On the other hand, microorganism infectivity depends on many factors including their virulence, landing site, and person's immunity. For those reasons, many aspects should be considered to avoid aerosol contaminants.

  18. On q-DEFORMED Para Oscillators and PARA-q Oscillators

    NASA Astrophysics Data System (ADS)

    Kumari, M. Krishna; Shanta, P.; Chaturvedi, S.; Srinivasan, V.

    Three generalized commutation relations for a single mode of the harmonic oscillator which contains para-bose and q oscillator commutation relations are constructed. These are shown to be inequivalent. The coherent states of the annihilation operator for these three cases are also constructed.

  19. Allergic contact dermatitis to para-phenylenediamine.

    PubMed

    Jenkins, David; Chow, Elizabeth T

    2015-02-01

    Exposure to hair dye is the most frequent route of sensitisation to para-phenylenediamine (PPD), a common contact allergen. International studies have examined the profile of PPD, but Australian-sourced information is lacking. Patients are often dissatisfied with advice to stop dyeing their hair. This study examines patients' characteristics, patch test results and outcomes of PPD allergy from a single Australian centre, through a retrospective analysis of patch test data from 2006 to 2013 at the Liverpool Hospital Dermatology Department. It reviews the science of hair dye allergy, examines alternative hair dyes and investigates strategies for hair dyeing. Of 584 patients, 11 were allergic to PPD. Our PPD allergy prevalence rate of 2% is at the lower end of international reported rates. About half these patients also react to para-toluenediamine (PTD). Affected patients experience a significant lifestyle disturbance. In all, 78% tried alternative hair dyes after the patch test diagnosis and more than half continued to dye their hair. Alternative non-PPD hair dyes are available but the marketplace can be confusing. Although some patients are able to tolerate alternative hair dyes, caution is needed as the risk of developing an allergy to other hair dye ingredients, especially PTD, is high.

  20. Dopant-Free GaN/AlN/AlGaN Radial Nanowire Heterostructures as High Electron Mobility Transistors

    DTIC Science & Technology

    2016-06-07

    microscopy (TEM) studies reveal that the GaN/ AlN/AlGaN radial nanowire heterostructures are dislocation -free single crystals. In addition, the...due to a reduction or elimination of impurity scattering by separating the dopants and surface potential fluctuations from the conduction channel . We...AlN/AlGaN radial nanowire heterostructures are dislocation -free single crystals. In addition, the thicknesses and compositions of the individual AlN

  1. Uso de Sustancias en Mujeres con Desventaja Social: Riesgo para el Contagio de VIH/SIDA

    PubMed Central

    Cianelli, R.; Ferrer, L; Bernales, M.; Miner, S.; Irarrázabal, L.; Molina, Y.

    2009-01-01

    Antecedentes La caracterización epidemiológica en Chile apunta a feminización, pauperización y heterosexualización de la epidemia del VIH, lo que implica un mayor riesgo para las mujeres en desventaja social. Si a esto se suma la utilización de sustancias, la vulnerabilidad de este grupo frente al VIH/SIDA aumenta. Objetivo Describir el uso de sustancias en mujeres con desventaja social e identificar factores de riesgo de contagio de VIH, asociados a este consumo. Material y Método 52 mujeres fueron entrevistadas como parte del proyecto “Testeando una intervención en prevención de VIH/SIDA en mujeres chilenas” GRANT # RO1 TW 006977. Se describen variables sociodemográficas y de consumo de sustancias a través de estadísticas descriptivas y se analiza la relación entre variables a través de pruebas de correlación. Resultados Los resultados indican un perfil sociodemográfico que sitúa a las mujeres en situación de vulnerabilidad frente al contagio de VIH/SIDA, con alto índice de uso de sustancias que acentúa el riesgo. Conclusiones Los hallazgos apuntan a la necesidad de considerar intervenciones que se enfoquen en la prevención de VIH en mujeres, abordando los riesgos asociados al consumo de sustancias. PMID:21197380

  2. Unveiling the Semicoherent Interface with Definite Orientation Relationships between Reinforcements and Matrix in Novel Al3BC/Al Composites.

    PubMed

    Zhao, Yongfeng; Qian, Zhao; Ma, Xia; Chen, Houwen; Gao, Tong; Wu, Yuying; Liu, Xiangfa

    2016-10-05

    High-strength lightweight Al-based composites are promising materials for a wide range of applications. To provide high performance, a strong bonding interface for effective load transfer from the matrix to the reinforcement is essential. In this work, the novel Al3BC reinforced Al composites have been in situ fabricated through a liquid-solid reaction method and the bonding interface between Al3BC and Al matrix has been unveiled. The HRTEM characterizations on the Al3BC/Al interface verify it to be a semicoherent bonding structure with definite orientation relationships: (0001)Al3BC//(11̅1)Al;[112̅0]Al3BC//[011]Al. Periodic arrays of geometrical misfit dislocations are also observed along the interface at each (0001)Al3BC plane or every five (11̅1)Al planes. This kind of interface between the reinforcement and the matrix is strong enough for effective load transfer, which would lead to the evidently improved strength and stiffness of the introduced new Al3BC/Al composites.

  3. Electrical stress effect on Josephson tunneling through ultrathin AlOx barrier in Nb/Al/AlOx/Nb junctions

    NASA Astrophysics Data System (ADS)

    Tolpygo, Sergey K.; Amparo, Denis

    2008-09-01

    The effect of dc electrical stress and breakdown on Josephson and quasiparticle tunneling in Nb/Al/AlOx/Nb junctions with ultrathin AlOx barriers typical for applications in superconductor digital electronics has been investigated. The junctions' conductance at room temperature and current-voltage (I-V) characteristics at 4.2 K have been measured after the consecutive stressing of the tunnel barrier at room temperature. Electrical stress was applied using current ramps with increasing amplitude ranging from 0 to ˜1000Ic corresponding to voltages across the barrier up to ˜0.65 V, where Ic is the Josephson critical current. A very soft breakdown has been observed with polarity-dependent breakdown current (voltage). As the stressing progresses, a dramatic increase in subgap conductance of the junctions, the appearance of subharmonic current steps, and a gradual increase in both the critical and the excess currents as well as a decrease in the normal-state resistance have been observed. The observed changes in superconducting tunneling suggest a model in which a progressively increasing number of defects and associated additional conduction channels [superconducting quantum point contacts (SQPCs)] are induced by electric field in the tunnel barrier. By comparing the I-V characteristics of these conduction channels with the nonstationary theory of current transport in SQPCs based on multiple Andreev reflections by Averin and Bardas, the typical transparency D of the induced SQPCs was estimated as D ˜0.7. The number of induced SQPCs was found to grow with voltage across the barrier as sinh(V /V0) with V0=0.045 V, in good agreement with the proposed model of defect formation by ion electromigration. The observed polarity dependence of the breakdown current (voltage) is also consistent with the model. Based on the observed magnitude of breakdown currents, electric breakdown of AlOx barrier during plasma processing was considered to be an unlikely cause of fabrication

  4. The oxidation of Ni-rich Ni-Al intermetallics

    NASA Technical Reports Server (NTRS)

    Doychak, Joseph; Smialek, James L.; Barrett, Charles A.

    1988-01-01

    The oxidation of Ni-Al intermetallic alloys in the beta-NiAl phase field and in the two phase beta-NiAl/gamma'-Ni3Al phase field has been studied between 1000 and 1400 C. The stoichiometric beta-NiAl alloy doped with Zr was superior to other alloy compositions under cyclic and isothermal oxidation. The isothermal growth rates did not increase monotonically as the alloy Al content was decreased. The characteristically ridged alpha-Al2O3 scale morphology, consisting of cells of thin, textured oxide with thick growth ridges at cell boundaries, forms on oxidized beta-NiAl alloys. The correlation of scale features with isothermal growth rates indicates a predominant grain boundary diffusion growth mechanism. The 1200 C cyclic oxidation resistance decreases near the lower end of the beta-NiAl phase field.

  5. Creep and Toughness of Cryomilled NiAl Containing Cr

    NASA Technical Reports Server (NTRS)

    Whittenberger, J. Daniel; Aikin, Beverly; Salem, Jon

    2000-01-01

    NiAl-AlN + Cr composites were produced by blending cryomilled NiAl powder with approx. 10 vol % Cr flakes. In comparison to the as-consolidated matrices, hot isostatically pressed Cr-modified materials did not demonstrate any significant improvement in toughness. Hot extruded NiAl-AlN+10.5Cr, however, possessed a toughness twice that determine for the base NiAl-AlN alloy. Measurement of the 1200 to 1400 K plastic flow properties revealed that the strength of the composites was completely controlled by the properties of the NiAl-AlN matrices. This behavior could be successfully modeled by the Rule-of-Mixtures, where load is shed from the weak Cr to the strong matrix.

  6. Unexpected Stability of Al4H6: a Borane Analog?

    NASA Astrophysics Data System (ADS)

    Xi, Li; Grubisic, Andrej; Stokes, Sarah; Gantefor, Gerd; Bowen, Kit; Boggavarapu, Kiran; Willis, Mary; Jena, Puru; Burgert, Ralph; Schnockel, Hans; Cordes, James

    2007-03-01

    While boron has many hydrides, aluminum has been thought to exhibit relatively few. A combined anion photoelectron and density functional theory computational study of the Al4H6^- anion, and its corresponding neutral, Al4H6, showed that Al4H6 can be understood in terms of the Wade-Mingos rules for electron counting, suggesting that it may be a borane analog. The data support an Al4H6 structure with a distorted tetrahedral aluminum atom framework, four terminal Al-H bonds, and two sets of counter-positioned Al-H-Al bridging bonds. The large HOMO-LUMO gap found for Al4H6 together with its exceptionally high heat of combustion further suggests that Al4H6 may be an important energetic material, if it can be prepared in bulk. This report announces the opening of a new chapter in aluminum-hydrogen chemistry.

  7. Reactive plasma spraying of Al-Ti alloys

    SciTech Connect

    Entezarian, M.; Shanker, K.; Tsantrizos, P.G.; Allaire, F.; Immarigeon, J.P.; Drew, R.A.L.

    1995-12-31

    Reactive plasma spraying was used to synthesize Al alloys containing a dispersion of TiAl{sub 3} intermetallics. Either Al powder or Al wire and TiCl{sub 4} were the raw materials used. The size, distribution, and morphology of the intermetallic phase were a function of the injection manner of the starting materials, the plasma process parameters, and the molar ratio of the reactants (TiCl{sub 4}/Al). Under optimum conditions, a fine dispersion of micron sized intermetallics was obtained. Investigation of the reaction mechanism showed that the particle`s temperature was a critical factor in producing a fine dispersion of TiAl{sub 3} phase in an Al matrix. Materials produced at temperatures below the melting point of TiAl{sub 3} resulted in a microstructure containing an Al core with a TiAl{sub 3} shell. In contrast, materials produced at higher temperatures resulted in a fine TiAl{sub 3} phase precipitating from the Al-Ti melt during the solidification process. Products were collected as porous deposited layers whose surface was contaminated with chlorides. The products were subjected to purification followed by hot rolling for further consolidation. The effectiveness of vacuum thermal treatment on the removal of Cl was investigated. Al chlorides could be removed by thermal treatments at temperatures below the melting point of Al, while some of the Ti subchlorides required higher temperatures. The mechanical properties of the consolidated materials were also determined and are reported.

  8. The Nature of Interfaces in Al-1050/Al-1050 and Al-1050/Mg-AZ31 Couples Joined by Magnetic Pulse Welding (MPW)

    NASA Astrophysics Data System (ADS)

    Stern, A.; Aizenshtein, M.; Moshe, G.; Cohen, S. R.; Frage, N.

    2013-07-01

    The microstructure and the phase composition of the interfaces of Al-1050/Al-1050 and Al-1050/Mg-AZ31 magnetic pulse welding (MPW) joints were characterized by SEM and TEM analyses. The mechanical properties were tested by nanoindentation. Properties of the Al-1050/Al-1050 interface joint were established. The interface is almost free from Al3Fe precipitates, which are present in the base metal. The hardness value is higher than that of the base metal; however, values of the Young's modulus of the interface and base metal are similar. It was suggested that the interface evolution in the Al-1050/Al-1050 system includes local melting and rapid solidification of the base materials. A wavy shaped heterogeneous interface was detected in the Al-1050/Mg-AZ31 joints. Some areas are free from visible intermetallic phases (IMPs), while others contain pockets of relatively coarse intermetallic precipitates. The presence of a relatively large fraction of globular porosity at the interface indicates that local melting takes place in the course of MPW. TEM characterization of regions free of IMPs at the interface reveals regions consisting of fcc supersaturated Al-Mg solid solution, apparently formed as a result of local mechanical alloying during MPW. In other regions, the composition and structure correspond to the Mg17Al12 phase, which was probably formed by local melting and rapid solidification.

  9. Comparative study on the influence of Al component at GaAlAs layer for GaAs/AlGaAs photocathode

    NASA Astrophysics Data System (ADS)

    Xu, Yuan; Chang, Benkang; Chen, Xinlong; Qian, Yunsheng

    2017-08-01

    We designed two transmission-mode GaAs/AlGaAs photocathodes with different Al x Ga1-x As layers, one has an Al x Ga1-x As layer with the Al component ranging from 0.9 to 0, and the other has a fixed Al component 0.7. Using the first-principle method, we calculated the electronic structure and absorption spectrum of Al x Ga1-x As at x = 0, 0.25, 0.5, 0.75 and 1, calculation results suggest that with the increase of the Al component, the band gap of Al x Ga1-x As increases. Then we activated the two samples, and obtained the spectral response curves and quantum efficiency curves; it is found that sample 1 has a better shortwave response and higher quantum efficiency at short wavelengths. Combined with the band structure diagram of the transmission-mode GaAs/AlGaAs photocathode and the fitted performance parameters, we analyze the phenomenon. It is found that the transmission-mode GaAs/AlGaAs photocathode with variable Al component and various doping structure can form a two-stage built-in electric field, which improves the probability of shortwave response photoelectrons escaping to the vacuum. In conclusion, such a structure reduces the influence of back-interface recombination, improves the shortwave response of the transmission-mode photocathode. Project supported by the National Natural Science Foundation of China (Nos. 91433108, 61301023).

  10. Effect of nitrogen incorporation into Al-based gate insulators in AlON/AlGaN/GaN metal-oxide-semiconductor structures

    NASA Astrophysics Data System (ADS)

    Asahara, Ryohei; Nozaki, Mikito; Yamada, Takahiro; Ito, Joyo; Nakazawa, Satoshi; Ishida, Masahiro; Ueda, Tetsuzo; Yoshigoe, Akitaka; Hosoi, Takuji; Shimura, Takayoshi; Watanabe, Heiji

    2016-10-01

    The superior physical and electrical properties of aluminum oxynitride (AlON) gate dielectrics on AlGaN/GaN substrates in terms of thermal stability, reliability, and interface quality were demonstrated by direct AlON deposition and subsequent annealing. Nitrogen incorporation into alumina was proven to be beneficial both for suppressing intermixing at the insulator/AlGaN interface and reducing the number of electrical defects in Al2O3 films. Consequently, we achieved high-quality AlON/AlGaN/GaN metal-oxide-semiconductor capacitors with improved stability against charge injection and a reduced interface state density as low as 1.2 × 1011 cm-2 eV-1. The impact of nitrogen incorporation into the insulator will be discussed on the basis of experimental findings.

  11. Chemical ordering and large tunnel magnetoresistance in Co2FeAl/MgAl2O4/Co2FeAl(001) junctions

    NASA Astrophysics Data System (ADS)

    Scheike, Thomas; Sukegawa, Hiroaki; Inomata, Koichiro; Ohkubo, Tadakatsu; Hono, Kazuhiro; Mitani, Seiji

    2016-05-01

    Epitaxial magnetic tunnel junctions (MTJs) with a Co2FeAl/CoFe (0.5 nm)/MgAl2O4/Co2FeAl(001) structure were fabricated by magnetron sputtering. High-temperature in situ annealing led to a high degree of B2-order in the Co2FeAl layers and cation order of the MgAl2O4 barrier. Large tunnel magnetoresistance (TMR) of up to 342% was obtained at room temperature (616% at 4 K), in contrast to the TMR ratio ( ≲ 160%) suppressed by the band-folding effect in Fe/cation-ordered MgAl2O4/Fe MTJs. The present study reveals that the high degree of B2-order and the resulting high spin polarization in the Co2FeAl electrodes enable us to bypass the band-folding problem in spinel barriers.

  12. Al-Ca and Al-Fe metal-metal composite strength, conductivity, and microstructure relationships

    SciTech Connect

    Kim, Hyong June

    2011-01-01

    Deformation processed metal-metal composites (DMMC’s) are composites formed by mechanical working (i.e., rolling, swaging, or wire drawing) of two-phase, ductile metal mixtures. Since both the matrix and reinforcing phase are ductile metals, the composites can be heavily deformed to reduce the thickness and spacing of the two phases. Recent studies have shown that heavily drawn DMMCs can achieve anomalously high strength and outstanding combinations of strength and conductivity. In this study, Al-Fe wire composite with 0.07, 0.1, and 0.2 volume fractions of Fe filaments and Al-Ca wire composite with 0.03, 0.06, and 0.09 volume fractions of Ca filaments were produced in situ, and their mechanical properties were measured as a function of deformation true strain. The Al-Fe composites displayed limited deformation of the Fe phase even at high true strains, resulting in little strengthening effect in those composites. Al-9vol%Ca wire was deformed to a deformation true strain of 13.76. The resulting Ca second-phase filaments were deformed to thicknesses on the order of one micrometer. The ultimate tensile strength increased exponentially with increasing deformation true strain, reaching a value of 197 MPa at a true strain of 13.76. This value is 2.5 times higher than the value predicted by the rule of mixtures. A quantitative relationship between UTS and deformation true strain was determined. X-ray diffraction data on transformation of Al + Ca microstructures to Al + various Al-Ca intermetallic compounds were obtained at the Advanced Photon Source at Argonne National Laboratory. Electrical conductivity was measured over a range of true strains and post-deformation heat treatment schedules.

  13. Transcriptome Analysis of Al-Induced Genes in Buckwheat (Fagopyrum esculentum Moench) Root Apex: New Insight into Al Toxicity and Resistance Mechanisms in an Al Accumulating Species.

    PubMed

    Xu, Jia Meng; Fan, Wei; Jin, Jian Feng; Lou, He Qiang; Chen, Wei Wei; Yang, Jian Li; Zheng, Shao Jian

    2017-01-01

    Relying on Al-activated root oxalate secretion, and internal detoxification and accumulation of Al, buckwheat is highly Al resistant. However, the molecular mechanisms responsible for these processes are still poorly understood. It is well-known that root apex is the critical region of Al toxicity that rapidly impairs a series of events, thus, resulting in inhibition of root elongation. Here, we carried out transcriptome analysis of the buckwheat root apex (0-1 cm) with regards to early response (first 6 h) to Al stress (20 μM), which is crucial for identification of both genes and processes involved in Al toxicity and tolerance mechanisms. We obtained 34,469 unigenes with 26,664 unigenes annotated in the NCBI database, and identified 589 up-regulated and 255 down-regulated differentially expressed genes (DEGs) under Al stress. Functional category analysis revealed that biological processes differ between up- and down-regulated genes, although 'metabolic processes' were the most affected category in both up- and down-regulated DEGs. Based on the data, it is proposed that Al stress affects a variety of biological processes that collectively contributes to the inhibition of root elongation. We identified 30 transporter genes and 27 transcription factor (TF) genes induced by Al. Gene homology analysis highlighted candidate genes encoding transporters associated with Al uptake, transport, detoxification, and accumulation. We also found that TFs play critical role in transcriptional regulation of Al resistance genes in buckwheat. In addition, gene duplication events are very common in the buckwheat genome, suggesting a possible role for gene duplication in the species' high Al resistance. Taken together, the transcriptomic analysis of buckwheat root apex shed light on the processes that contribute to the inhibition of root elongation. Furthermore, the comprehensive analysis of both transporter genes and TF genes not only deep our understanding on the responses of

  14. Covalent bonds in AlMnSi icosahedral quasicrystalline approximant

    PubMed

    Kirihara; Nakata; Takata; Kubota; Nishibori; Kimura; Sakata

    2000-10-16

    Electron density distributions were obtained using the maximum entropy method with synchrotron radiation powder data. In the metallic Al12Re, metallic bonding was observed for the icosahedral Al12 cluster with central Re atom. In the nonmetallic alpha-AlMnSi 1/1 approximant, covalent bonds were found in the electron density distribution of the Mackay icosahedral cluster without central atom. Rather than the Hume-Rothery mechanism, the covalency of Al (Si) icosahedron and that between Al (Si) and Mn atoms is considered to be the origin of the pseudogap and nonmetallic behavior of alpha-AlMnSi.

  15. Interfacial microstructure and growth mechanism of Al4C3 in Grf/Al composites fabricated by liquid pressure method.

    PubMed

    Xu, Wang; Chenchong, Wang; Zhichao, Zhang; Ping, Liang; Yanhua, Shi; Guofu, Zhang

    2014-10-01

    In this study, Grf/Al composite was fabricated by liquid pressure method. The diffusion layer and the nucleation and growth of Al4C3 were observed at the interface of Grf/Al composites by TEM and HRTEM. The growth mechanism of Al4C3 was analyzed in detail by crystallography theory. It was found that Al4C3 had no phase relations with the carbon fiber. (0001) layer of Al4C3 was parallel with main growth direction. Both the diffusion layer at the interface and crystal structure of Al4C3 affected the shape of Al4C3. At a certain position, Al4C3 could connect two fibers when the fibers were close to each other. Copyright © 2014 Elsevier Ltd. All rights reserved.

  16. Millimeter distance effects of surface plasmon polaritons in electroformed Al-Al2O3-Ag diodes

    NASA Astrophysics Data System (ADS)

    Hickmott, T. W.

    2017-02-01

    Electroforming of metal-insulator-metal diodes is a soft dielectric breakdown that changes the high resistance of as-prepared diodes to a low resistance state. Electroforming of Al-Al2O3-metal diodes with anodic Al2O3 results in voltage-controlled negative resistance in the current-voltage (I-V) characteristics, electroluminescence (EL), and electron emission into vacuum (EM). EL is due to electrons injected at the Al-Al2O3 interface combining with radiative defects in Al2O3. Surface plasmon polaritons (SPPs) are electromagnetic waves that can be excited by photons or electrons. SPPs are confined to a metal-dielectric interface, cause large electric fields in the metal and dielectric, and have ranges of micrometers. The temperature dependence of I-V curves, EL, and EM of a group of electroformed Al-Al2O3-Ag diodes with Al2O3 thicknesses between 12 nm and 20 nm, group A, was measured between 200 K and 300 K. After a sequence of temperature measurements, the Al-Al2O3-Ag diodes, the Al-Al2O3 regions between diodes, and portions of the Ag on the glass region that provides contacts to the diodes are darkened. The range of darkening is >7 mm in a diode with 12 nm of Al2O3 and 2.0-3.5 mm in diodes with Al2O3 thicknesses between 14 nm and 20 nm. Darkening is attributed to the occurrence of SPPs generated by EL photons at the Ag-Al2O3 and Al-Al2O3 interfaces. The results are compared to a second group of Al-Al2O3-Ag diodes with identical Al2O3 thicknesses, group B, that were prepared in the same way as the diodes of group A except for a difference in the deposition of Al films for the two groups. Al-Al2O3-Ag diodes of group B exhibit enhanced EL, which is attributed to spontaneous emission of recombination centers in Al2O3 being enhanced by large electromagnetic fields that are due to SPPs that are generated by EL photons.

  17. Processing and characterization of Al-Al3Nb prepared by mechanical alloying and equal channel angular pressing

    NASA Astrophysics Data System (ADS)

    Chandran, P.; Zafari, A.; Lui, E. W.; Xia, K.

    2017-05-01

    Mechanically alloyed Al with immiscible elements such as Nb can lead to a uniform distribution of nanoscaled precipitates which are highly stable compared to conventional alloying and with excellent interface, resulting in significant increase in strength without problems associated with nano ceramic particles in metal matrix composites. Although immiscible, Nb can be alloyed with Al through mechanical milling, forming trialuminide (Al3Nb), either directly or upon subsequent precipitation, which possesses high strength, stiffness and stability at elevated temperatures. In the present study, Al-5 at.% Nb supersaturated solid solution was achieved after prolonged ball milling and nano Al3Nb precipitates were formed during subsequent ageing at 530°C. The Al-Al3Nb powder was consolidated by equal channel angular pressing (ECAP) at 400°C, resulting in a fully dense material with a uniform distribution of nanoscaled Al3Nb precipitates in the Al matrix.

  18. Protegiendo a su familia de los terremotos-Los siete pasos a la seguridad para prepararse en caso de un terremoto (en espa?ol y en ingles)

    USGS Publications Warehouse

    Desarrollado por American Red Cross, Asian Pacific Fund

    2007-01-01

    Les escribimos esta carta para comunicarle un mensaje sumamente importante sobre las preparaciones de emergencia. Historicamente, hemos sufrido terremotos aqui en el Area de la Bahia de San Francisco que han causado graves privaciones para los residentes de la comunidad y da?os increibles a nuestras ciudades. Es probable que suframos un terremoto de gran magnitud en los proximos 30 a?os. Muchos de nosotros venimos de otros paises donde hemos pasado por terremotos y por eso creemos entenderlos. Sin embargo, la manera que nos preparamos para terremotos en nuestros paises de origen puede ser distinta a la que empleamos aca en los Estados Unidos. Muy pocas personas mueren a causa de los derrumbes de los edificios en el Area de la Bahia porque la mayoria de los edificios son construidos para resistir el sacudimiento de la tierra. Pero es muy probable que su familia no tenga atencion medica, alimentos o que esten separados del uno al otro por dias o semanas. Finalmente depende de usted mantener a su familia a salvo hasta que llegue asistencia, por eso les pedimos que nos unamos para aprender a cuidar a su familia antes, durante, y despues de un terremoto. El primer paso es leer este libro. Cada uno de su familia, ni?os y adultos, pueden aprender como prepararse para un terremoto. Haga participar e incluya sus ni?os; pueden ayudarle a prepararse. Aproveche las clases ofrecidas en su comunidad sobre las preparaciones de terremotos por la Cruz Roja Estadounidense (American Red Cross). Estos cursos de preparacion son gratis y disponibles en espa?ol para todos en la comunidad sin tomar en cuenta la historia de la familia, estado legal, genero o edad. Les recomendamos que tome ventaja de estas clases gratuitas. Para mas informacion consulte la ultima pagina de este libro. Recuerde que un terremoto puede ocurrir sin aviso y la unica manera de reducir el da?o de terremotos es estar preparados. !Preparese!

  19. Fabrication of Al/Al3Ti Functionally Graded Materials by Reaction Centrifugal Mixed-Powder Method

    NASA Astrophysics Data System (ADS)

    El-Hadad, Shimaa; Sato, Hisashi; Miura-Fujiwara, Eri; Watanabe, Yoshimi

    2011-01-01

    Formation of compositional gradient in Al/Al3Ti Functionally graded materials (FGMs) fabricated by the centrifugal method (CM) depends mainly on the centrifugal force and the processing temperature. In this study, a novel centrifugal method, reaction centrifugal mixed-powder method (RCMPM), was proposed to fabricate Al/Al3Ti FGMs under fixed centrifugal force (G=80). The effects of RCMPM processing temperature on the formation of Al3Ti intermetallics, its morphology and its distribution in the fabricated Al/Al3Ti FGMs have been investigated. Fine granular Al3Ti were observed at relatively lower processing temperature while the known coarse platelet-like particles of Al3Ti could be achieved at higher casting temperatures. Moreover, Ti3Al intermetallics compound and unreacted Ti phases are also observed along with Al3Ti particles. In addition, distribution of Al3Ti intermetallics size and their volume fraction showed a significant change when the Al/Al3Ti FGMs processed at different temperatures relative to the liquidus temperature of the master alloy.

  20. Transplacental passage of 26Al from pregnant rats to fetuses and 26Al transfer through maternal milk to suckling rats

    NASA Astrophysics Data System (ADS)

    Yumoto, S.; Nagai, H.; Matsuzaki, H.; Kobayashi, T.; Tada, W.; Ohki, Y.; Kakimi, S.; Kobayashi, K.

    2000-10-01

    Aluminium (Al) is toxic to the growth of fetuses and sucklings. However, the incorporation of Al into fetuses and sucklings in the periods of gestation and lactation has not been well clarified because Al lacks a suitable isotope for a tracer experiment. In this study, we used 26Al (a radioisotope of Al with half-life of 716,000 yr) as a tracer, and measured 26Al incorporation into fetuses and sucklings by accelerator mass spectrometry (AMS). To investigate Al incorporation into fetuses through transplacental passage, 26Al ( 26AlCl 3) was subcutaneously injected into pregnant rats on day 15 of gestation. 26Al was also subcutaneoulsy injected into lactating rats from day 1 to day 20 postpartum. By day 20 of gestation, 0.2% of the 26Al injected into a pregnant rat had been transferred to the fetuses, and 26Al was detected in the brain and liver of the fetuses. On day 9 postpartum, high levels of 26Al were demonstrated in the brain, liver, kidneys and blood of suckling rats. It is concluded that 26Al subcutaneously injected into pregnant rats and/or lactating rats is incorporated into their offspring through transplacental passage and/or maternal milk.

  1. Interdiffusion between U(Mo,Pt) or U(Mo,Zr) and Al or Al A356 alloy

    NASA Astrophysics Data System (ADS)

    Komar Varela, C.; Mirandou, M.; Aricó, S.; Balart, S.; Gribaudo, L.

    2009-12-01

    Solid state reactions in chemical diffusion couples U-7 wt.%Mo-0.9 wt.%Pt/Al at 580 °C and U-7 wt.%Mo-0.9 wt.%Pt/Al A356 alloy, U-7 wt.%Mo-1 wt.%Zr/Al and U-7 wt.%Mo-1 wt.%Zr/Al A356 alloy at 550 °C were characterized. Results were obtained from optical and scanning electron microscopy, electron probe microanalysis and X-ray diffraction. The UAl 3, UAl 4 and Al 20Mo 2U phases were identified in the interaction layers of γU(Mo,Pt)/Al and γU(Mo,Zr)/Al diffusion couples. Al 43Mo 4U 6 ternary compound was also identified in γU(Mo,Zr)/Al due to the decomposition of γU(Mo,Zr) phase. The U(Al,Si) 3 and U 3Si 5 phases were identified in the interaction layers of γU(Mo,Pt)/Al A356 and γU(Mo,Zr)/Al A356 diffusion couples. These phases are formed due to the migration of Si to the interaction layer. In the diffusion couple U(Mo,Zr)/Al A356, Zr 5Al 3 phase was also identified in the interaction layer. The use of synchrotron radiation at Brazilian Synchrotron Light Laboratory (LNLS, CNPq, Campinas, Brazil) was necessary to achieve a complete crystallographic characterization.

  2. TEM characterization of Al/Al{sub 2}O{sub 3} composite fabricated by reactive metal infiltration

    SciTech Connect

    Gao, Y.; Jia, J.; Loehman, R.E.; Ewsuk, K.G.

    1994-12-31

    The microstructure of Al/{alpha}-Al{sub 2}0{sub 3} composites made by infiltrating Al into dense mullite preforms has been characterized using transmission electron microscopy. Observations revealed that the formation of the Al/Al{sub 2}0{sub 3} composites involves three stages. Initially, Al infiltrates into a dense mullite preform through grain boundary diffusion, and reacts with mullite at grain boundaries to form a partial reaction zone. Then, a complete reaction takes place in the reaction region between the partial reaction zone and the full reaction zone to convert the dense mullite preform to a composite of {alpha}-Al{sub 2}0{sub 3} (matrix) and an Al-Si phase (thin channels). Finally, the reduced Si from the reaction diffuses out of the Al/Al{sub 2}0{sub 3} composite through the metal channels, whereas Al from the molten Al pool is continuously drawn to the reaction region until the mullite preform is consumed or the sample is removed from the molten Al pool. Based on the observed microstructure, infiltration mechanisms have been discussed, and a growth model of the composites is proposed in which the process involves repeated nucleation of Al{sub 2}0{sub 3} grains and grain growth.

  3. Oxidation of TiAl3 and L12 Coatings on Ti-45Al-5Nb Alloy at 1173K

    NASA Astrophysics Data System (ADS)

    Nishimoto, Takumi; Kitajima, Yuri; Hayashi, Shigenari; Narita, Toshio

    Oxidation behavior of TiAl3 and L12 coated Ti-45at%Al-5at%Nb alloys at 1173K in air was investigated using mass gain measurement, field emission scanning electron microscopy, transmission electron microscopy, electron-probe microanalysis, glow discharge optical electron spectroscopy, and glancing angle X-ray diffraction analysis. The TiAl3 formed meta-stable alumina θ-Al2O3, while the oxide scale on the L12 consisted of a duplex structure with an outer rutile TiO2 and an inner α-Al2O3. During the very initial stages of oxidation both Ti and Al in the L12 coating could be oxidized, and then the faster diffusing Ti goes out to form an outer, continuous Ti-rich oxide which covers the slow growing Al2O3. In case of the TiAl3 an outer, continuous TiO2 layer was not observed because of the smaller amount of Ti in the TiAl3. It could be concluded that the outer, Ti-rich oxide enhanced a phase transformation of Al2O3 from θ to α. To elucidate the Ti effect, Ti-vapor treated TiAl3 and Ni-50at%Al were oxidized at 1173K in air, and showed formation of an α-Al2O3, in contrast to θ-Al2O3 on their bare alloys.

  4. Effect of Ti Dopant on Surface Diffusion of Isolated Alane Species: A Comparison between Al (111) and Al (100) surfaces

    NASA Astrophysics Data System (ADS)

    Karim, Altaf; Muckerman, James

    2009-03-01

    Our density functional theory-based kinetic Monte Carlo simulations show that an embedded Ti atom creates a well in the potential energy surfaces of Al(111) and Al(100) as probed by hydrogen and other isolated alane species. Hydrogen adatoms become trapped around Ti atoms on an Al(111) surface, whereas Al adatoms do not exhibit any significant effect of the potential energy well created by the Ti atoms. In contrast to the case of Al(111), Al adatoms on an Al(100) surface also become trapped around the Ti atoms for a longer period of time compared to the hydrogen adatoms on this surface. Therefore, Ti sites on Al(100) become poisoned by the presence of Al adatoms around them for long periods of time, thereby blocking further dissociative adsorption of hydrogen. The overall diffusion of Al adatoms on an Al(100) surface is significantly lower compared to the Al(111) surface. This fact suggests that the Ti-doped Al(111) surface is perhaps more conducive to the production of alane species than the Ti-doped Al(100) surface despite its higher activation barrier for the dissociation of molecular hydrogen.

  5. Revisiting the Al/Al2O3 Interface: Coherent Interfaces and Misfit Accommodation

    DOE PAGES

    Pilania, Ghanshyam; Thijsse, Barend J.; Hoagland, Richard G.; ...

    2014-03-27

    We report the coherent and semi-coherent Al/α-Al2O3 interfaces using molecular dynamics simulations with a mixed, metallic-ionic atomistic model. For the coherent interfaces, both Al-terminated and O-terminated nonstoichiometric interfaces have been studied and their relative stability has been established. To understand the misfit accommodation at the semi-coherent interface, a 1-dimensional (1D) misfit dislocation model and a 2-dimensional (2D) dislocation network model have been studied. For the latter case, our analysis reveals an interface dislocation structure with a network of three sets of parallel dislocations, each with pure-edge character, giving rise to a pattern of coherent and stacking-fault-like regions at the interface.more » Structural relaxation at elevated temperatures leads to a further change of the dislocation pattern, which can be understood in terms of a competition between the stacking fault energy and the dislocation interaction energy at the interface. In conclusion, our results are expected to serve as an input for the subsequent dislocation dynamics models to understand and predict the macroscopic mechanical behavior of Al/α-Al2O3 composite heterostructures.« less

  6. Revisiting the Al/Al2O3 Interface: Coherent Interfaces and Misfit Accommodation

    PubMed Central

    Pilania, Ghanshyam; Thijsse, Barend J.; Hoagland, Richard G.; Lazić, Ivan; Valone, Steven M.; Liu, Xiang-Yang

    2014-01-01

    We study the coherent and semi-coherent Al/α-Al2O3 interfaces using molecular dynamics simulations with a mixed, metallic-ionic atomistic model. For the coherent interfaces, both Al-terminated and O-terminated nonstoichiometric interfaces have been studied and their relative stability has been established. To understand the misfit accommodation at the semi-coherent interface, a 1-dimensional (1D) misfit dislocation model and a 2-dimensional (2D) dislocation network model have been studied. For the latter case, our analysis reveals an interface dislocation structure with a network of three sets of parallel dislocations, each with pure-edge character, giving rise to a pattern of coherent and stacking-fault-like regions at the interface. Structural relaxation at elevated temperatures leads to a further change of the dislocation pattern, which can be understood in terms of a competition between the stacking fault energy and the dislocation interaction energy at the interface. Our results are expected to serve as an input for the subsequent dislocation dynamics models to understand and predict the macroscopic mechanical behavior of Al/α-Al2O3 composite heterostructures. PMID:24670940

  7. ALS Along the Axons - Expression of Coding and Noncoding RNA Differs in Axons of ALS models.

    PubMed

    Rotem, Nimrod; Magen, Iddo; Ionescu, Ariel; Gershoni-Emek, Noga; Altman, Topaz; Costa, Christopher J; Gradus, Tal; Pasmanik-Chor, Metsada; Willis, Dianna E; Ben-Dov, Iddo Z; Hornstein, Eran; Perlson, Eran

    2017-03-16

    Amyotrophic lateral sclerosis (ALS) is a multifactorial lethal motor neuron disease with no known treatment. Although the basic mechanism of its degenerative pathogenesis remains poorly understood, a subcellular spatial alteration in RNA metabolism is thought to play a key role. The nature of these RNAs remains elusive, and a comprehensive characterization of the axonal RNAs involved in maintaining neuronal health has yet to be described. Here, using cultured spinal cord (SC) neurons grown using a compartmented platform followed by next-generation sequencing (NGS) technology, we find that RNA expression differs between the somatic and axonal compartments of the neuron, for both mRNA and microRNA (miRNA). Further, the introduction of SOD1(G93A) and TDP43(A315T), established ALS-related mutations, changed the subcellular expression and localization of RNAs within the neurons, showing a spatial specificity to either the soma or the axon. Altogether, we provide here the first combined inclusive profile of mRNA and miRNA expression in two ALS models at the subcellular level. These data provide an important resource for studies on the roles of local protein synthesis and axon degeneration in ALS and can serve as a possible target pool for ALS treatment.

  8. Sensitization to para-tertiary-butylphenolformaldehyde resin.

    PubMed

    Massone, L; Anonide, A; Borghi, S; Usiglio, D

    1996-03-01

    Phenolformaldehyde resins, especially the para-tertiary-butylphenolformaldehyde resin (PTBP-FR), are widely used in industry and in numerous materials of everyday use, such as glues, adhesives, or inks. They can cause many occupational and nonoccupational cases of dermatitis. Forty-one patients with positive patch test results to PTBP-FR were selected for this study. They were patch-tested with a series of chemically related compounds and cross-reactions were noted. Phenolformaldehyde resin (PF-R) was frequently positive (65.8%), whereas other compounds gave a much smaller number of positive results. Cases of occupational exposure (24.4%), location of the dermatitis (hands were involved in 46.3% of cases), and possible sources of exposure (shoes were the responsible agent in 12.2% of cases) were evaluated. Phenolformaldehyde resins are an important cause of contact dermatitis and must be studied chemically and clinically to improve the prognosis of sensitized patients.

  9. Operating experience with the ALS linac

    SciTech Connect

    Selph, F.; Massoletti, D.

    1991-05-01

    The linac injector for the Advanced Light Source (ALS) at LBL was recently put into operation. Energy is 50 MeV, frequency 3 GHz. The electron gun delivers up to 6nC in a 3.0-ns bunch at 120 kV. A train of bunches is injected into a 1-Hz booster and accelerated to 1.5 GHz for storage ring injection. A magnetic analysis system is used for optimizing the linac. Measured beam properties from the gun and after acceleration in the linac are described. 9 refs., 3 figs.

  10. Ultranarrow AuPd and Al wires

    SciTech Connect

    Altomare, Fabio; Chang, Albert M.; Melloch, Michael R.; Hong Yuguang; Tu, Charles W.

    2005-04-25

    In this letter, we discuss a versatile template technique aimed to the fabrication of sub-10 nm wide wires. Using this technique, we have measured AuPd wires, 12 nm wide and as long as 20 {mu}m. Even materials that form a strong superficial oxide, and thus not suited to be used in combination with other techniques, can be employed. In particular, we have measured Al wires, with lateral width smaller or comparable to 10 nm, and length exceeding 10 {mu}m.

  11. Tribological Properties of Al Alloy Particle Composites

    NASA Astrophysics Data System (ADS)

    Prasad, S. V.; Rohatgi, P. K.

    1987-11-01

    In recent years, a variety of particle dispersed aluminum alloy composites have been synthesized. The tribological properties of these materials include sliding wear, friction, seizure resistance and abrasive wear (of composites containing solid lubricant as well as hard ceramic particles). The potential high-performance applications of Al-alloy-graphite composites include pistons for internal combustion engines and bearings. For such applications, the low stress abrasive wear rates of composites, containing high volume fractions (0.20-0.35), are comparable to that of heat treated 1045 steel.

  12. Response to de la Iglesia et al.

    PubMed

    Yetish, Gandhi; Kaplan, Hillard; Gurven, Michael; Wood, Brian; Pontzer, Herman; Manger, Paul R; Wilson, Charles; McGregor, Ronald; Siegel, Jerome M

    2016-04-04

    We wish to respond to the commentary of de la Iglesia et al. [1]. Studies comparing sleep in different communities have different goals. One frequent goal has been to determine how sleep is affected by manipulating specific 'modern' conditions. Many studies have investigated the effect of artificial light and electronic entertainment. Such studies have clearly shown that light, particularly blue light, delays sleep onset [2]. Studying the effect of artificial light on sleep was not a goal of our study. Copyright © 2016 Elsevier Ltd. All rights reserved.

  13. Development of SiAlON materials

    NASA Technical Reports Server (NTRS)

    Layden, G. K.

    1977-01-01

    Cold pressing and sintering techniques were used to produce ceramic bodies in which the major phase was beta prime Si3-Al-O-N4 solid solution. A variety of foreign oxides were used to promote liquid phase sintering, and this resulted in the incorporation of additional solid phases in the ceramic bodies which controlled elevated temperature properties. None of the bodies studied to date exhibited both adequate high temperature mechanical properties and oxidation resistance. Criteria are suggested to guide the formulation of bodies with improved high temperature properties.

  14. Elastic scattering of10C +27Al

    NASA Astrophysics Data System (ADS)

    Aguilera, E. F.; Kolata, J. J.; Martinez-Quiroz, E.; Lizcano, D.; Amador-Valenzuela, P.; García-Flores, A.; Bardayan, D. W.; O'Malley, P. D.; Monteiro, D. S.; Morcelle, V.; Carmichael, S.; Henderson, S. L.; Blankstein, D.; Hall, M. R.; Schultz, B.; Allen, J.; Kelly, J.

    2017-07-01

    Preliminary results for the elastic scattering of the Super-Borromean nucleus10C on27Al are presented, at E lab = 29 MeV. Taking the Sao Paulo potential as the bare potential, possible polarization potentials are investigated by adding a volume and a surface complex term to account for fusion and direct couplings, respectively. Besides an imaginary short-range potential to simulate the bulk of fusion, the best-fit polarization potential turns out to be real and has the effect of shifting the barrier radius up by 0.6 fm, thus suggesting a fusion enhancement.

  15. Tumor-Wachstumsmodellierung als parametrisches Bildregistrierproblem

    NASA Astrophysics Data System (ADS)

    Becker, Stefan; Jungmann, Jan Ole; Mang, Andreas; Buzug, Thorsten M.

    In der vorliegenden Arbeit stellen wir ein neues Modell zur Kopplung des Tumormasseeffektes an die, der Wachstumsmodellierung unterliegende, anisotrope Reaktionsdiffusionsgleichung vor. Die Gleichung wird auf einem hochaufgelösten Voxelgitter diskretisiert. Eine Modellierung der Anisotropie des Diffusionsprozesses ermöglicht die Integration von Diffusions-Tensor-Bildgebungsdaten. Die raumfordernde Wirkung des Tumors wird als parametrisches Bildregistrierproblem aufgefasst. Hierbei wird die resultierende Verteilung der Tumorzellkonzentration in die zu optimierende Zielfunktion integriert. Erste qualitative Ergebnisse zeigen, dass eine Minimierung der aufgestellten Zielfunktion zu einer plausiblen Modellierung des Masseeffektes führt.

  16. [Laparoscopic treatment of para-esophageal hernias].

    PubMed

    Collet, D; Wagner, T; Sa Cunha, A; Rault, A; Masson, B

    2006-10-01

    This retrospective study aims at analyzing the functional results obtained in patients operated by laparoscopy for a para-esophageal hernia. From 1994 to 2004, 38 patients underwent a laparoscopic procedure for a symptomatic para-esophageal hiatal hernia of at least 3/4 of the proximal stomach: 27 females and 11 males, mean age 65 years (extreme: 22-84). There was no case on emergency, 4 patients had have at least one episode of intrathoracic volvulus. The operation consisted in gastric reduction into the abdominal cavity, excision of the sac, suture of the crura reinforced with a mesh in 6 patients and the construction of a gastric wrap. A postoperative barium swallow was performed on POD 3 in order to confirm the anatomical result. Mean operating time was 157 minutes (75-480), no case was converted into laparotomy. Four postoperative complications were observed (morbidity 10.8%): one gastric perforation diagnosed on POD 1, 2 severe dysphagias linked to the wrap, and one atelectasia. There was no death in this series. Functional results were evaluated by the mean of a questionnaire in 33 patients who had a follow up more than 6 months. Thirty-three questionnaires have been sent, 3 patients were lost and one was dead. Among the 29 patients analyzed, 14 were very satisfied, 11 were satisfied and 3 were deceived by the operation. Best results are obtained in patients with GERD, dysphagia or postprandial cardiothoracic symptoms. These results compared to the published data allow us to discuss about indications of surgery, the necessity to removal the hernia sac, and the advantages to reinforce the crura by the mean of a non absorbable mesh.

  17. Time domain para hydrogen induced polarization.

    PubMed

    Ratajczyk, Tomasz; Gutmann, Torsten; Dillenberger, Sonja; Abdulhussaein, Safaa; Frydel, Jaroslaw; Breitzke, Hergen; Bommerich, Ute; Trantzschel, Thomas; Bernarding, Johannes; Magusin, Pieter C M M; Buntkowsky, Gerd

    2012-01-01

    Para hydrogen induced polarization (PHIP) is a powerful hyperpolarization technique, which increases the NMR sensitivity by several orders of magnitude. However the hyperpolarized signal is created as an anti-phase signal, which necessitates high magnetic field homogeneity and spectral resolution in the conventional PHIP schemes. This hampers the application of PHIP enhancement in many fields, as for example in food science, materials science or MRI, where low B(0)-fields or low B(0)-homogeneity do decrease spectral resolution, leading to potential extinction if in-phase and anti-phase hyperpolarization signals cannot be resolved. Herein, we demonstrate that the echo sequence (45°-τ-180°-τ) enables the acquisition of low resolution PHIP enhanced liquid state NMR signals of phenylpropiolic acid derivatives and phenylacetylene at a low cost low-resolution 0.54 T spectrometer. As low field TD-spectrometers are commonly used in industry or biomedicine for the relaxometry of oil-water mixtures, food, nano-particles, or other systems, we compare two variants of para-hydrogen induced polarization with data-evaluation in the time domain (TD-PHIP). In both TD-ALTADENA and the TD-PASADENA strong spin echoes could be detected under conditions when usually no anti-phase signals can be measured due to the lack of resolution. The results suggest that the time-domain detection of PHIP-enhanced signals opens up new application areas for low-field PHIP-hyperpolarization, such as non-invasive compound detection or new contrast agents and biomarkers in low-field Magnetic Resonance Imaging (MRI). Finally, solid-state NMR calculations are presented, which show that the solid echo (90y-τ-90x-τ) version of the TD-ALTADENA experiment is able to convert up to 10% of the PHIP signal into visible magnetization.

  18. Hot Corrosion Performance of AlO-CrO/NiCoCrAlYTa and AlO/NiCoCrAlYTa Coatings Deposited by Atmospheric Plasma Spraying

    NASA Astrophysics Data System (ADS)

    Tao, Chong; Wang, Lei; Cheng, Nailiang; Hu, Hengfa; Liu, Yang; Song, Xiu

    2016-04-01

    AlO-CrO/NiCoCrAlYTa and AlO/NiCoCrAlYTa coatings were deposited on 316L stainless steel substrate using atmospheric plasma spraying, respectively, in order to improve the oxidation and corrosion resistance. The hot corrosion performance of the coatings at 700 and 900 °C were studied, and the detailed microstructures and phase composition of the coatings were analyzed using x-ray diffraction, scanning electron microscope with energy dispersive spectrometer, and transmission electron microscope. The results show that both coatings are structurally featured by slatted layers, consisting of amorphous phase, Cr2O3, Ni3Al, and Al2O3. The hot corrosion resistance of AlO-CrO/NiCoCrAlYTa coating is better than that of AlO/NiCoCrAlYTa coating. This improvement is attributed to lower porosity and more compact Cr2O3 in AlO-CrO/NiCoCrAlYTa coating which performs better than Al2O3 in blocking further inward progress of corrosion and oxidization.

  19. Kerr effect enhancement and corrosion resistance improvement by AlN and AlSiN films (abstract)

    NASA Astrophysics Data System (ADS)

    Lee, Z. Y.; Miao, X. S.; Liu, X. J.; Lin, G. Q.; Wan, D. F.; Hu, Y. S.

    1990-05-01

    RE-TM amorphous thin films with perpendicular magnetic anisotropy are promising for use in erasable optical recording media. In order to improve the drawback of easy oxidation and lower C/N of RE-TM films, some protective layers such as SiO, SiO2, ZnS, AlN, and Si3N4 films were studied.1,2 We have studied the Kerr effect enhancement and corrosion resistance improvement by AlN and AlSiN films. AlN and AlSiN films were prepared on glass, PC, and PMMA substrates by a rf magnetron sputtering system with three targets using low sputtering power. The films have a high refractive index (2-2.15), high optical transparency (over 90%), and high stability. The relation between optical properties and rf reactive sputtering conditions (Ar: N2 ratio, total pressure, sputtering power, sputtering time), composition, spectral transmittance, and uniformity of sputtering AlN and AlSiN films were studied. The Kerr rotation angle was up to 1.5° in AlN/TbFeCo/glass and AlSiN/TbFeCo/glass multilayer structures (laser is incident from air). We also studied AlN/TbFeCo/AlN/glass, AlN/TbFeCo/AlN/Al/glass, AlSiN/TbFeCo/AlSiN/glass and multilayer structure films. The results show that AlN and AlSiN films provide sufficient Kerr effect enhancement and superior corrosion resistance improvement to the RE-TM films. The microstructure of those films were also studied by JEM, XRD, and XPS.

  20. Modelizacion, control e implementacion de un procesador energetico paralelo para aplicacion en sistemas multisalida

    NASA Astrophysics Data System (ADS)

    Ferreres Sabater, Agustin

    Cualquier sistema electronico que incluya un procesado o tratamiento de la senal, y ademas, algun tipo de actuador mecanico generalmente necesita, como minimo, dos tensiones diferentes de alimentacion. Excluyendo los sistemas de alimentacion distribuida, la solucion tecnica mas utilizada para proporcionar dos o mas tensiones consiste en las fuentes de alimentacion multisalida. En una fuente de alimentacion multisalida los diferentes circuitos que conforman cada salida comparten un mismo transformador de potencia optimizando coste, masa, y volumen. Las ventajas obtenidas con este procedimiento tienen en su contra el efecto que sobre cada salida individual provocan las demas en su conjunto debido, principalmente, a los efectos de los elementos parasitos de los componentes. Un cambio de carga en una de las salidas produce un transitorio que es visto por todas las demas como un efecto de impedancia cruzada, y al final del transitorio, la tension de cada salida es diferente respecto a la que tenian antes del transitorio. Este ultimo resultado se conoce como regulacion cruzada. La disminucion de los efectos de la regulacion cruzada ha sido objeto de estudio durante los ultimos anos. El objetivo ha sido el desarrollo de distintas estrategias que permiten, desde disminuir los efectos de la regulacion cruzada hasta los niveles deseables, a eliminarla completamente. El resultado final suele suponer una penalizacion sobre el diseno del sistema directamente proporcional al grado de regulacion a conseguir en las distintas salidas. Entre las soluciones propuestas para eliminar la regulacion cruzada las tecnicas de post-regulacion se han consolidado como la opcion mas aceptada ya que, pueden aplicarse a cualquier convertidor y no suponen ninguna complejidad adicional a la hora de plantear el diseno. En esta Tesis Doctoral se abordara el estudio de la tecnica conocida como postregulacion mediante transformador controlado, que si bien se ha empleado en convertidores resonantes, su

  1. Theory and X-ray Absorption Spectroscopy for Aluminum Coordination Complexes – Al K-Edge Studies of Charge and Bonding in (BDI)Al, (BDI)AlR2, and (BDI)AlX2 Complexes.

    PubMed

    Altman, Alison B; Pemmaraju, C D; Camp, Clément; Arnold, John; Minasian, Stefan G; Prendergast, David; Shuh, David K; Tyliszczak, Tolek

    2015-08-19

    Polarized aluminum K-edge X-ray absorption near edge structure (XANES) spectroscopy and first-principles calculations were used to probe electronic structure in a series of (BDI)Al, (BDI)AlX2, and (BDI)AlR2 coordination compounds (X = F, Cl, I; R = H, Me; BDI = 2,6-diisopropylphenyl-β-diketiminate). Spectral interpretations were guided by examination of the calculated transition energies and polarization-dependent oscillator strengths, which agreed well with the XANES spectroscopy measurements. Pre-edge features were assigned to transitions associated with the Al 3p orbitals involved in metal-ligand bonding. Qualitative trends in Al 1s core energy and valence orbital occupation were established through a systematic comparison of excited states derived from Al 3p orbitals with similar symmetries in a molecular orbital framework. These trends suggested that the higher transition energies observed for (BDI)AlX2 systems with more electronegative X(1-) ligands could be ascribed to a decrease in electron density around the aluminum atom, which causes an increase in the attractive potential of the Al nucleus and concomitant increase in the binding energy of the Al 1s core orbitals. For (BDI)Al and (BDI)AlH2 the experimental Al K-edge XANES spectra and spectra calculated using the eXcited electron and Core-Hole (XCH) approach had nearly identical energies for transitions to final state orbitals of similar composition and symmetry. These results implied that the charge distributions about the aluminum atoms in (BDI)Al and (BDI)AlH2 are similar relative to the (BDI)AlX2 and (BDI)AlMe2 compounds, despite having different formal oxidation states of +1 and +3, respectively. However, (BDI)Al was unique in that it exhibited a low-energy feature that was attributed to transitions into a low-lying p-orbital of b1 symmetry that is localized on Al and orthogonal to the (BDI)Al plane. The presence of this low-energy unoccupied molecular orbital on electron-rich (BDI)Al distinguishes

  2. Acoustic resonator with Al electrodes on an AlN layer and using a GaAs substrate

    DOEpatents

    Kline, Gerald R.; Lakin, Kenneth M.

    1985-12-03

    A method of fabricating an acoustic wave resonator wherein all processing steps are accomplished from a single side of said substrate. The method involves deposition of a multi-layered Al/AlN structure on a GaAs substrate followed by a series of fabrication steps to define a resonator from said composite. The resulting resonator comprises an AlN layer between two Al layers and another layer of AlN on an exterior of one of said Al layers.

  3. Nanoindentation of NiAl and Ni3Al crystals on (100), (110), and (111) surfaces: A molecular dynamics study

    NASA Astrophysics Data System (ADS)

    Seymour, Richard; Hemeryck, Anne; Nomura, Ken-ichi; Wang, Weiqiang; Kalia, Rajiv K.; Nakano, Aiichiro; Vashishta, Priya

    2014-04-01

    Molecular dynamics simulations were performed to study the nanoindentation of NiAl and Ni3Al crystals on three surfaces: (100), (110), and (111). The calculated load-displacement curves show discrete drops at certain indentation depths, indicating dislocation bursts during indentation. The hardness values for the two materials were found to depend significantly on the indented crystallographic plane: the (100) surface is the softest for NiAl and the hardest for Ni3Al. We also found distinctive deformation activities in the subsurface region in Ni3Al crystals, while dislocation loops propagate deep into the substrate in NiAl systems.

  4. Compressive strength of directionally solidified NiAl-NiAlNb intermetallics at 1200 and 1300 K

    NASA Technical Reports Server (NTRS)

    Whittenberger, J. D.; Reviere, R.; Noebe, R. D.; Oliver, B. F.

    1992-01-01

    Results are presented from measurements of 1200 K and 1300 K compressive properties of two directionally solidified NiAl-NiAlNb compositions (in at. pct): Ni-41.75Al-16.5Nb (eutectic composition) and Ni-47.5Al-8.9Nb-1.3C (Al-rich composition). Results showed that the strength of the eutectic was a factor of 2 greater than that of the Al-rich composition. However, the analysis of the compressive stress-strain data indicated that the deformation mechanism was the same in both materials.

  5. Data supporting Al-Abed et al., Environ. Sci.: Nano, 2016,

    EPA Pesticide Factsheets

    Data files representing each of the Figures and Tables published in Al-Abed et al., Environ. Sci.: Nano, 2016,3, 593. The data file names identify the Figure or Table and each file contains an internal set of data definitionsThis dataset is associated with the following publication:Al-Abed, S.R., J. Virkutyte, J. Ortenzio , R.M. McCarrick, L. Degn, R. Zucker , N. Coates , K. Cleveland, H. Ma, S. Diamond, K. Dreher , and W. Boyes. Environmental aging alters AI(OH)3 coating of TiO2 nanoparticles enhancing their photocatalytic and phototoxicity activities. Environmental Science: Nano. RSC Publishing, Cambridge, UK, N/A, (2016).

  6. FUV Reflectance of Recently Prepared Al Protected with AlF3: COR Program Technology Development

    NASA Technical Reports Server (NTRS)

    Quijada, Manuel

    2016-01-01

    Astronomical observations in the Far Ultraviolet (FUV) spectral region are some of the more challenging due to the very distant and faint objects that are typically searched for in cosmic origin studies such as origin of large scale structure, the formation, evolution, and age of galaxies and the origin of stellar and planetary systems. These challenges are driving the need to improve the performance of optical coatings over a wide spectral range that would increase reflectance in mirrors and reduced absorption in dielectric filters used in optical telescope for FUV observations. This paper will present recent advances in reflectance performance for Al+AlF3 mirrors optimized for Lyman-alpha wavelength by performing the deposition of the AlF3 overcoat at elevated substrate temperatures.

  7. Structural Analysis of Dispersion Strengthened Al-Al4C3 Material by XRD Method

    NASA Astrophysics Data System (ADS)

    Varchola, Marián; Saksl, Karel; Durišin, Juraj; Besterci, Michal

    2011-04-01

    Dispersion strengthened materials belong into the group of composite materials, which are made mainly by powder metallurgy. Their structure has a polycrystalline matrix, in which dispersion particles are incorporated, mainly oxide, carbide and nitride type. The Al-C systems belong among modern materials designed for work at elevated temperature. This work focused on a study of the microstructure in containing 4 vol.% Al4C3. The microstructure was analyzed X-ray diffraction line profile analysis. It is a powerful and convenient method to probe the microstructural characteristics of composites materials. In this paper the development of texture and size of crystallites in composite material dependence on annealing time and temperature was examined. Texture of the experimental materials was analyzed by means texture coefficient (TC). TC for the (220) plane in Al4C3 composite indicate the presence of markedly deformed texture. Size of crystallites depends on annealing temperatures and times.

  8. Investigation of etching techniques for superconductive Nb/Al-Al2O3/Nb fabrication processes

    NASA Technical Reports Server (NTRS)

    Lichtenberger, A. W.; Lea, D. M.; Lloyd, F. L.

    1993-01-01

    Wet etching, CF4 and SF6 reactive ion etching (RIE), RIE/wet hybrid etching, Cl-based RIE, ion milling, and liftoff techniques have been investigated for use in superconductive Nb/Al-Al2O3/Nb fabrication processes. High-quality superconductor-insulator-superconductor (SIS) junctions have been fabricated using a variety of these etching methods; however, each technique offers distinct tradeoffs for a given process an wafer design. In particular, it was shown that SF6 provides an excellent RIE chemistry for low-voltage anisotropic etching of Nb with high selectivity to Al. The SF6 tool has greatly improved the trilevel resist junction insulation process. Excellent repeatability, selectivity with respect to quartz, and submicron resolution make Cl2 + BCl3 + CHCl3 RIE a very attractive process for trilayer patterning.

  9. Highly strained AlAs-type interfaces in InAs/AlSb heterostructures

    SciTech Connect

    Vallet, M. Warot-Fonrose, B.; Gatel, C.; Nicolai, J.; Ponchet, A.; Claveau, Y.; Combe, N.; Magen, C.; Teissier, R.; Baranov, A. N.

    2016-05-23

    Spontaneously formed Al-As type interfaces of the InAs/AlSb system grown by molecular beam epitaxy for quantum cascade lasers were investigated by atomic resolution scanning transmission electron microscopy. Experimental strain profiles were compared to those coming from a model structure. High negative out-of-plane strains with the same order of magnitude as perfect Al-As interfaces were observed. The effects of the geometrical phase analysis used for strain determination were evidenced and discussed in the case of abrupt and huge variations of both atomic composition and bond length as observed in these interfaces. Intensity profiles performed on the same images confirmed that changes of chemical composition are the source of high strain fields at interfaces. The results show that spontaneously assembled interfaces are not perfect but extend over 2 or 3 monolayers.

  10. Reaction diffusion in the NiCrAl and CoCrAl systems

    NASA Technical Reports Server (NTRS)

    Levine, S. R.

    1978-01-01

    The paper assesses the effect of overlay coating and substrate composition on the kinetics of coating depletion by interdiffusion. This is accomplished by examining the constitution, kinetics and activation energies for a series of diffusion couples primarily of the NiCrAl/Ni-10Cr or CoCrAl/Ni-10Cr type annealed at temperatures in the range 1000-1205 C for times up to 500 hr. A general procedure is developed for analyzing diffusion in multicomponent multiphase systems. It is shown that by introducing the concept of beta-source strength, which can be determined from appropriate phase diagrams, the Wagner solution for consumption of a second phase in a semiinfinite couple is successfully applied to the analysis of MCrAl couples. Thus, correlation of beta-recession rate constants with couple composition, total and diffusional activation energies, and interdiffusion coefficients are determined.

  11. Salt metathesis for the synthesis of M-Al and M-H-Al bonds.

    PubMed

    Riddlestone, Ian M; Urbano, Juan; Phillips, Nicholas; Kelly, Michael J; Vidovic, Dragoslav; Bates, Joshua I; Taylor, Russell; Aldridge, Simon

    2013-01-07

    Salt metathesis has been exploited in the synthesis of M-Al bonds, stabilized by a variety of chelating N-donor substituents at aluminium and including the first examples of such systems featuring ancillary guanidinato frameworks. Importantly, this synthetic approach can be extended to the synthesis of σ-alane complexes through the use of hydride-containing transition metal nucleophiles. Cp'Mn(CO)(2)-[H(Cl)Al{(N(i)Pr)(2)CPh}] synthesized via this route features an alane ligand bound in a more 'side-on' fashion than other alane complexes, although DFT calculations imply that the potential energy surface associated with variation in the Mn-H-Al angle is a very soft one.

  12. AlH3 and Al2H6: Magic Clusters with Unmagical Properties

    NASA Astrophysics Data System (ADS)

    Rao, B. K.; Jena, P.; Burkart, S.; Ganteför, G.; Seifert, G.

    2001-01-01

    Enhanced stability, low electron affinity, and high ionization potential are the hallmarks of a ``magic'' cluster. With an electron affinity of 0.28 eV, ionization potential of 11.43 eV, and a large binding energy, AlH3 satisfies these criteria. However, unlike other magic clusters that interact only weakly with each other, two AlH3 clusters bind to each other with an energy of 1.54 eV. The resulting Al2H6, while also a magic cluster in its own right, possesses the most unusual property that the difference between its adiabatic and vertical detachment energy is about 2 eV-the largest of any known cluster. These results, based on density functional theory, are verified experimentally through photodetachment spectroscopy.

  13. CarbAl Heat Transfer Material

    NASA Technical Reports Server (NTRS)

    Fink, Richard

    2015-01-01

    The increasing use of power electronics, such as high-current semiconductor devices and modules, within space vehicles is driving the need to develop specialty thermal management materials in both the packaging of these discrete devices and the packaging of modules consisting of these device arrays. Developed by Applied Nanotech, Inc. (ANI), CarbAl heat transfer material is uniquely characterized by its low density, high thermal diffusivity, and high thermal conductivity. Its coefficient of thermal expansion (CTE) is similar to most power electronic materials, making it an effective base plate substrate for state-of-the-art silicon carbide (SiC) super junction transistors. The material currently is being used to optimize hybrid vehicle inverter packaging. Adapting CarbAl-based substrates to space applications was a major focus of the SBIR project work. In Phase I, ANI completed modeling and experimentation to validate its deployment in a space environment. Key parameters related to cryogenic temperature scaling of CTE, thermal conductivity, and mechanical strength. In Phase II, the company concentrated on improving heat sinks and thermally conductive circuit boards for power electronic applications.

  14. Combinatorial electrochemistry on Al Fe alloys

    NASA Astrophysics Data System (ADS)

    Ionut Mardare, Andrei; Prasad Yadav, Amar; Wieck, Andreas Dirk; Stratmann, Martin; Hassel, Achim Walter

    2008-07-01

    Combinatorial material development was combined with high throughput microelectrochemistry to allow an efficient but comprehensive investigation of the interface chemistry of Al rich Al Fe alloys as a function of their chemical composition. Composition spread thin films with a linear composition gradient were produced by thermal codeposition. A scanning droplet cell was used to determine the open circuit potential and to perform successive anodic oxide formation with intermittent impedance spectroscopy. The film formation factor, the relative permittivity of the oxides and the onset potential of oxide formation were determined quantitatively as function of the composition with a resolution of 0.5 at.%. An unexpected synergistic effect is found in a very narrow composition range between 9 and 12 at.% Fe. This effect, which shifts the onset potential by nearly 1 V, is discussed in terms of a local accumulation of Fe resulting in a redox stabilisation of space charge layer formation during high-field oxide growth. The results are supported by composition and depth dependent XPS measurements. Corrections were made to figures 5 and 6 of this article on 19 September 2008.

  15. Cysteine Modifications in the Pathogenesis of ALS

    PubMed Central

    Valle, Cristiana; Carrì, Maria Teresa

    2017-01-01

    Several proteins are found misfolded and aggregated in sporadic and genetic forms of amyotrophic lateral sclerosis (ALS). These include superoxide dismutase (SOD1), transactive response DNA-binding protein (TDP-43), fused in sarcoma/translocated in liposarcoma protein (FUS/TLS), p62, vasolin-containing protein (VCP), Ubiquilin-2 and dipeptide repeats produced by unconventional RAN-translation of the GGGGCC expansion in C9ORF72. Up to date, functional studies have not yet revealed a common mechanism for the formation of such diverse protein inclusions. Consolidated studies have demonstrated a fundamental role of cysteine residues in the aggregation process of SOD1 and TDP43, but disturbance of protein thiols homeostatic factors such as protein disulfide isomerases (PDI), glutathione, cysteine oxidation or palmitoylation might contribute to a general aberration of cysteine residues proteostasis in ALS. In this article we review the evidence that cysteine modifications may have a central role in many, if not all, forms of this disease. PMID:28167899

  16. TBK1 is associated with ALS and ALS-FTD in Sardinian patients.

    PubMed

    Borghero, Giuseppe; Pugliatti, Maura; Marrosu, Francesco; Marrosu, Maria Giovanna; Murru, Maria Rita; Floris, Gianluca; Cannas, Antonino; Occhineri, Patrizia; Cau, Tea B; Loi, Daniela; Ticca, Anna; Traccis, Sebastiano; Manera, Umberto; Canosa, Antonio; Moglia, Cristina; Calvo, Andrea; Barberis, Marco; Brunetti, Maura; Gibbs, J Raphael; Renton, Alan E; Errichiello, Edoardo; Zoledziewska, Magdalena; Mulas, Antonella; Qian, Yong; Din, Jun; Pliner, Hannah A; Traynor, Bryan J; Chiò, Adriano

    2016-07-01

    Recently, mutations in the TANK-binding kinase 1 (TBK1) gene were identified as a cause for amyotrophic lateral sclerosis (ALS) with or without comorbid frontotemporal dementia. We have assessed the frequency and clinical characteristics of TBK1 mutations in a cohort of ALS patients of Sardinian ancestry. Whole-exome sequencing was performed on Hiseq2000 platform (Illumina). Genome analysis Toolkit was used to align and to code variants according to Human Genome (UCSC hg19). Mutation was confirmed with Sanger sequence. In our screening of 186 Sardinian ALS cases, we found 3 (1.6%) patients carrying 3 distinct novel genetic variants: a nonsynonymous SNV c.1150C>T leading to a p.Arg384Thr change in exon 9; a nonsynonymous SNV c.1331G>A causes a p.Arg444Gln change in exon 11; and a frameshift deletion c.2070delG (p.Met690fs) at the exon 20 of the gene leading to a stop at 693 codon. The latter patients also carried missense mutation c.98C>T of the SQSTM1 gene causing a substitution of an arginine with a valine at the position 33 (p.Arg33Val). All variants were found to be deleterious according to in silico predictions. All cases were apparently sporadic and one of them showed frontotemporal dementia associated to ALS. These mutations were not found in 2 cohorts of 6780 ethnic-matched controls. We have found that TBK1 mutations account for 1.6% of Sardinian ALS cases. Our data support the notion that TBK1 is a novel ALS gene, providing important evidence complementary to the first descriptions.

  17. Growth and photoluminescence characteristics of AlGaAs nanowires

    NASA Astrophysics Data System (ADS)

    Wu, Z. H.; Sun, M.; Mei, X. Y.; Ruda, H. E.

    2004-07-01

    Growth of high-quality single-crystal AlGaAs nanowires was demonstrated using the vapor-liquid-solid (VLS) mechanism with molecular-beam epitaxy (MBE). Highly ordered AlGaAs nanowire arrays and GaAs /AlGaAs multilayer nanowires were also prepared. Photoluminescence (PL) from homogeneous AlGaAs and GaAs /AlGaAs multilayer nanowires was measured. The Al composition of the AlGaAs nanowires was found to be significantly lower than that for planar MBE films grown under the same conditions, as determined from PL and energy-dispersive x-ray spectroscopy measurements. This is explained in terms of the different growth mechanisms for VLS and normal MBE. Such AlGaAs nanowires are expected to have a wide range of applications in electronic and photonic devices.

  18. Microstructure and Creep Properties of TiAl-Ti3Al In-Situ Composites

    SciTech Connect

    Hodge, A M; Hsiung, L L

    2004-02-18

    Objectives: {lg_bullet} Exploit thermomechanical-processing techniques to fabricate TiAl/Ti3Al in-situ laminate composites with the size of lamella width down to submicron or nanometer length-scales. {lg_bullet} Characterize microstructure and elevated-temperature creep resistance of the in-situ composites. {lg_bullet} Investigate the fundamental interrelationships among microstructures, alloying additions, and mechanical properties of the in-situ composites so as to achieve the desired properties of the in-situ composites for high-temperature structural applications.

  19. Vanishing quasiparticle density in a hybrid Al/Cu/Al single-electron transistor

    NASA Astrophysics Data System (ADS)

    Saira, O.-P.; Kemppinen, A.; Maisi, V. F.; Pekola, J. P.

    2012-01-01

    The achievable fidelity of many nanoelectronic devices based on superconducting aluminum is limited by either the density of residual nonequilibrium quasiparticles nqp or the density of quasiparticle states in the gap, characterized by Dynes parameter γ. We infer upper bounds nqp<0.033μm-3 and γ<1.6×10-7 from transport measurements performed on Al/Cu/Al single-electron transistors, improving previous results by an order of magnitude. Owing to efficient microwave shielding and quasiparticle relaxation, a typical number of quasiparticles in the superconducting leads is zero.

  20. Excitonic localization at macrostep edges in AlGaN/AlGaN multiple quantum wells

    NASA Astrophysics Data System (ADS)

    Hou, Mengjun; Qin, Zhixin; Zhang, Lisheng; Han, Tianyang; Wang, Mingxing; Xu, Fujun; Wang, Xinqiang; Yu, Tongjun; Fang, Zheyu; Shen, Bo

    2017-04-01

    Double peaks at wavelength of 276 and 290 nm are observed for AlGaN/AlGaN multiple quantum wells (MQWs). Cathodoluminescence (CL) mappings identify that the emission at 290 nm originates from the macrostep edges. Potential minima induced by local variation of QW thickness and Ga incorporation are found along the step edges, where quantum wires (QWRs) are formed. The lateral advance rate of macrostep (∼310 nm/h) is obtained by investigating the distribution of QWRs. Temperature-dependent CL spectrum suggest that thermal quenching for 290 nm emission is dramatically suppressed compared with that for conventional QWs emission, which shows excitonic localization characteristics of QWRs.