Science.gov

Sample records for part ii experimental

  1. Gas Atomization of Amorphous Aluminum Powder: Part II. Experimental Investigation

    NASA Astrophysics Data System (ADS)

    Zheng, Baolong; Lin, Yaojun; Zhou, Yizhang; Lavernia, Enrique J.

    2009-12-01

    The optimal processing parameters that are required to atomize amorphous Al were established on the basis of numerical simulations in part I of this study. In this part II, the characterization of cooling rate experienced by gas-atomized, Al-based amorphous powders was studied via experiments. An experimental investigation was implemented to validate the numerical predictions reported in part I of this study. The cooling rate experienced by the powders, for example, was experimentally determined on the basis of dendrite arm spacing correlations, and the results were compared with the numerical predictions. The experimental studies were completed using commercial Al 2024 as a baseline material and Al90Gd7Ni2Fe1 metallic glass (MG). The results showed that the cooling rate of droplets increases with decreasing particle size, with an increasing proportion of helium in the atomization gas and with increasing melt superheat. The experimental results reported in this article suggest good agreement between experiments and numerical simulations.

  2. Matter from Outside Our Solar System -- New Insights, Part II. Experimental Measurements and Interpretation.

    ERIC Educational Resources Information Center

    Wefel, John P.

    1982-01-01

    The second of two parts (part 1 in v20 n4, p222, Apr 1982) focuses on experimental techniques used to study cosmic-ray isotopic composition, experimental results, and comparison between cosmic-ray source matter and solar-system material. Several models for nucleosynthesis and evolution of cosmic-source matter are also discussed. (Author/JN)

  3. Computational and experimental prediction of dust production in pebble bed reactors, Part II

    SciTech Connect

    Mie Hiruta; Gannon Johnson; Maziar Rostamian; Gabriel P. Potirniche; Abderrafi M. Ougouag; Massimo Bertino; Louis Franzel; Akira Tokuhiro

    2013-10-01

    This paper is the continuation of Part I, which describes the high temperature and high pressure helium environment wear tests of graphite–graphite in frictional contact. In the present work, it has been attempted to simulate a Pebble Bed Reactor core environment as compared to Part I. The experimental apparatus, which is a custom-designed tribometer, is capable of performing wear tests at PBR relevant higher temperatures and pressures under a helium environment. This environment facilitates prediction of wear mass loss of graphite as dust particulates from the pebble bed. The experimental results of high temperature helium environment are used to anticipate the amount of wear mass produced in a pebble bed nuclear reactor.

  4. Peripapillary and posterior scleral mechanics--part II: experimental and inverse finite element characterization.

    PubMed

    Girard, Michaël J A; Downs, J Crawford; Bottlang, Michael; Burgoyne, Claude F; Suh, J-K Francis

    2009-05-01

    The posterior sclera likely plays an important role in the development of glaucoma, and accurate characterization of its mechanical properties is needed to understand its impact on the more delicate optic nerve head--the primary site of damage in the disease. The posterior scleral shells from both eyes of one rhesus monkey were individually mounted on a custom-built pressurization apparatus. Intraocular pressure was incrementally increased from 5 mm Hg to 45 mm Hg, and the 3D displacements were measured using electronic speckle pattern interferometry. Finite element meshes of each posterior scleral shell were reconstructed from data generated by a 3D digitizer arm (shape) and a 20 MHz ultrasound transducer (thickness). An anisotropic hyperelastic constitutive model described in a companion paper (Girard, Downs, Burgoyne, and Suh, 2009, "Peripapillary and Posterior Scleral Mechanics--Part I: Development of an Anisotropic Hyperelastic Constitutive Model," ASME J. Biomech. Eng., 131, p. 051011), which includes stretch-induced stiffening and multidirectional alignment of the collagen fibers, was applied to each reconstructed mesh. Surface node displacements of each model were fitted to the experimental displacements using an inverse finite element method, which estimated a unique set of 13 model parameters. The predictions of the proposed constitutive model matched the 3D experimental displacements well. In both eyes, the tangent modulus increased dramatically with IOP, which indicates that the sclera is mechanically nonlinear. The sclera adjacent to the optic nerve head, known as the peripapillary sclera, was thickest and exhibited the lowest tangent modulus, which might have contributed to the uniform distribution of the structural stiffness for each entire scleral shell. Posterior scleral deformation following acute IOP elevations appears to be nonlinear and governed by the underlying scleral collagen microstructure as predicted by finite element modeling. The

  5. Dissecting Diversity Part II

    ERIC Educational Resources Information Center

    Matthews, Frank

    2005-01-01

    This article presents "Dissecting Diversity, Part II," the conclusion of a wide-ranging two-part roundtable discussion on diversity in higher education. The participants were as follows: Lezli Baskerville, J.D., President and CEO of the National Association for Equal Opportunity (NAFEO); Dr. Gerald E. Gipp, Executive Director of the…

  6. Experimental violation of a Bell-Leggett-Garg inequality using weak measurements, Part II: The Violation

    NASA Astrophysics Data System (ADS)

    White, T. C.; Mutus, J.; Dressel, J.; Kelly, J.; Barends, R.; Megrant, A.; Jeffrey, E.; Sank, D.; Campbell, B.; Chen, Y.; Chen, Z.; Chiaro, B.; Dunsworth, A.; Fowler, A.; Hoi, I.-C.; Neill, C.; O'Malley, P. J. J.; Roushan, P.; Quintana, C.; Vainsencher, A.; Wenner, J.; Korotkov, A. N.; Cleland, A. N.; Martinis, J. M.

    2015-03-01

    We experimentally demonstrate the violation of a hybrid Bell-Leggett-Garg inequality that avoids both the disjoint sampling and fair sampling loopholes that are common to traditional Bell inequalities. Our algorithm uses sequential weak measurements of a Bell state that are implemented with four superconducting Xmon qubits. In this second of two talks, we present experimental detail on the measurement of the CHSH correlator and the analysis of error mechanisms. We find that the dependence of the correlations on the measurement strength shows excellent agreement with theoretical predictions, but the magnitude of the correlator varies greatly with system fidelity. For sufficiently weak and high fidelity measurements, we achieve a violation that is many standard deviations above the classical limit.

  7. The effect of selective photosuppression of sensitized pathogenic microflora: Part II. Experimental validation on animals

    NASA Astrophysics Data System (ADS)

    Masychev, Viktor I.; Risovannaya, Olga N.

    2005-03-01

    Results of in vivo experiments have shown the maximum effectiveness of combined use of photo sensitizer 0,1% gel Radachlorine simultaneously with continuous and super pulse low energy irradiation of the diode laser with energy density 400 J/cm2, and power 1W. Given parameters have lead to complete elimination of Streptococcus pyogenes from inflammation foci in oral cavity of experimental animals.

  8. Determination of competitive adsorption isotherms applying the nonlinear frequency response method. Part II. Experimental demonstration.

    PubMed

    Ilić, Milica; Petkovska, Menka; Seidel-Morgenstern, Andreas

    2009-08-14

    This paper demonstrates an experimental application of the nonlinear frequency response (FR) method extension to determine adsorption isotherms of binary mixtures. This method, based on the analysis of the response of a chromatographic column subjected to the sinusoidal inlet concentration changes, is shown to be an alternative for isotherm determination. The critical issue related to the successful application of the method is to reach experimentally the low frequency asymptotic behaviour of the corresponding frequency response functions (FRFs). Although, there are different possibilities to perform periodical inlet concentration changes, in this paper only simultaneous changes for both components were considered. The adsorption of phenol and 2-phenylethanol on octadecyl silica was analyzed experimentally using a mixture of methanol and water as a solvent. Parameters of competitive isotherms were also estimated for comparison using the classical perturbation method. Despite certain differences between competitive isotherms estimated with the two methods that were found, the obtained results show the potential of the nonlinear FR method for measuring competitive isotherms.

  9. Dissolution of particles in binary alloys: part II. experimental investigation on an Al-Si alloy

    NASA Astrophysics Data System (ADS)

    Tundal, Ulf H.; Ryum, Nils

    1992-02-01

    A detailed experimental study of the dissolution kinetics of Si particles in an Al-Si alloy has been carried out in order to test the validity of the two models presented in the accompanying article.[1] In these models, the dissolution kinetics are dependent on the particle size distribution of the alloy. An alloy with composition Co = 0.77 at. pct Si was heat-treated in order to obtain rather coarse spherical particles (1 to 10 μn). The size distribution of the particles was found to be close to the log-normal distribution. At high temperatures, when the solvus concentration was well above Co, the experimental values were very close to the values of the model which predicted the highest dissolution rates. At lower temperatures, when the solvus concentration was closer to C o, the experimental values lay in between the values predicted by the two models. The results clearly demonstrate that a size distribution of particles must be included in the model if an accurate prediction of the dissolution kinetics is to be achieved.

  10. Influence of a stationary magnetic field on water relations in lettuce seeds. Part II: experimental results.

    PubMed

    Reina, F G; Pascual, L A; Fundora, I A

    2001-12-01

    An experimental study on water absorption by lettuce seeds previously treated in a stationary magnetic field of 0-10 mT is presented. A significant increase in the rate with which the seeds absorb water is observed in the interval 0-10 mT of magnetic treatment. An increment in the total mass of absorbed water in this interval is also observed. These results are consistent with the reports on the increase of germination rate of the seeds, and the theoretical calculation of the variations induced by magnetic fields in the ionic currents across the cellular membrane. The fields originate in changes in the ionic concentration and thus in the osmotic pressure which regulates the entrance of water to the seeds. The good correlation between the theoretical approach and experimental results provides strong evidence that the magnetic field alters the water relations in seeds, and this effect may be the explanation of the reported alterations in germination rate of seeds by the magnetic field.

  11. Performance of Higher Order Campbell methods, Part II: calibration and experimental application

    NASA Astrophysics Data System (ADS)

    Elter, Zs.; de Izarra, G.; Filliatre, P.; Jammes, C.; Pázsit, I.

    2016-11-01

    Applying Higher Order Campbelling methods in neutron flux monitoring with fission chambers is advantageous due to their capabilities to suppress the impact of unwanted noises and signal contributions (such as gamma radiation). This work aims to verify through experimental results that the basic assumptions behind the Higher Order Campelling methods are valid in critical reactors. The experiments, reported in this work, were performed at the MINERVE reactor in Cadarache. It is shown that the calibration of a fission chamber and the associated electronic system is possible in higher order mode. With the use of unbiased cumulant estimators and with digital processing, it is shown that over a wide count rate range, accurate count rate estimation can be achieved based on signal samples of a few ms, which is a significant progress compared to similar experimental results in the literature. The difference between the count rate estimated by pulse counting and by the Higher Order Campelling is less than 4%. The work also investigates the possibility of monitoring transient events. For this purpose, a control rod drop event was followed in Higher Order Campbelling mode.

  12. PART II: Comparison of Theoretical and Experimental Estimations of Site Effects

    NASA Astrophysics Data System (ADS)

    Triantafyllidis, P.; Hatzidimitriou, P. M.; Suhadolc, P.; Theodulidis, N.; Anastasiadis, A.

    To check the reliability and the quality of the theoretically estimated ground responses obtained from the 2-D simulation by the application of the hybrid method in PART-I, we compare some of them with those obtained at the same sites from observed data using the Standard Spectral Ratio (SSR). The comparison validates our synthetic modeling and shows that in cases of complex geometries, the use of at least 2-D numerical simulations is required in order to reliably evaluate site effects and thus facilitate the microzonation of the city of Thessaloniki.

  13. Refining the Experimental Analysis of Academic Skills Deficits: Part II. Use of Brief Experimental Analysis to Evaluate Reading Fluency Treatments

    ERIC Educational Resources Information Center

    Daly, Edward J., III; Bonfiglio, Christine M.; Mattson, Tara; Persampieri, Michael; Foreman-Yates, Kristin

    2006-01-01

    The technology of brief experimental analysis is just beginning to be used for identification of effective treatments for individual students who experience difficulty with oral reading fluency. In this study, the effect of a reading fluency treatment package was examined on easy and hard passages, and generalization was assessed on passages with…

  14. Probabilistic evidential assessment of gunshot residue particle evidence (Part II): Bayesian parameter estimation for experimental count data.

    PubMed

    Biedermann, A; Bozza, S; Taroni, F

    2011-03-20

    Part I of this series of articles focused on the construction of graphical probabilistic inference procedures, at various levels of detail, for assessing the evidential value of gunshot residue (GSR) particle evidence. The proposed models--in the form of Bayesian networks--address the issues of background presence of GSR particles, analytical performance (i.e., the efficiency of evidence searching and analysis procedures) and contamination. The use and practical implementation of Bayesian networks for case pre-assessment is also discussed. This paper, Part II, concentrates on Bayesian parameter estimation. This topic complements Part I in that it offers means for producing estimates usable for the numerical specification of the proposed probabilistic graphical models. Bayesian estimation procedures are given a primary focus of attention because they allow the scientist to combine (his/her) prior knowledge about the problem of interest with newly acquired experimental data. The present paper also considers further topics such as the sensitivity of the likelihood ratio due to uncertainty in parameters and the study of likelihood ratio values obtained for members of particular populations (e.g., individuals with or without exposure to GSR).

  15. Post-Messinian evolution of the Florence Rise area (Western Cyprus Arc) Part II: Experimental modeling

    NASA Astrophysics Data System (ADS)

    Sellier, N. C.; Vendeville, B. C.; Loncke, L.

    2013-04-01

    The Florence rise is located southwest of the island of Cyprus and belongs to the western part of the Cyprus arc. The Florence rise is an accretionary prism, with some amount of strike slip, where the thick layer of evaporitic Messinian decouples deformation in the post-Messinian cover from that in the pre-Messinian "basement." The basement structural highs, whether presently active or inactive, influence the deformation and displacement patterns of the salt and its overburden. Our first experiment focused on the presence, in nature, of normal faults located above basement thrusts. Deformation of the salt layer and its overburden was influenced by several processes. On one hand, the entire model was subjected to regional shortening, and basement thrusts formed. On the other hand, the local vertical rise associated with basement thrusts created local slopes down which the salt and overburden glided gravitationally, in some places leading to the formation of normal faults in an otherwise compressional regional setting. Our second experiment was designed to model the buttressing effect of the Florence rise and the Eratosthenes Seamount on thin-skinned displacement patterns during regional gravity spreading of the Nile cone. Results indicate that in the Northeastern distal region, buttressing by these two basement highs forced the salt and its overburden to flow northeastward, as a lateral escape toward the free boundary of the region.

  16. Mycotoxins revisited: Part II.

    PubMed

    Berger, Kyan J; Guss, David A

    2005-02-01

    Mushrooms are ubiquitous in nature. They are an important source of nutrition, however, certain varieties contain chemicals that can be highly toxic to humans. Industrially cultivated mushrooms are historically very safe, whereas foraging for mushrooms or accidental ingestion of mushrooms in the environment can result in serious illness and death. The emergency department is the most common site of presentation for patients suffering from acute mushroom poisoning. Although recognition can be facilitated by identification of a characteristic toxidrome, the presenting manifestations can be variable and have considerable overlap with more common and generally benign clinical syndromes. The goal of this two-part article is to review the knowledge base on this subject and provide information that will assist the clinician in the early consideration, diagnosis and treatment of mushroom poisoning. Part I reviewed the epidemiology and demographics of mushroom poisoning, the physical characteristics of the most toxic varieties, the classification of the toxic species, and presented an overview of the cyclopeptide-containing mushroom class. Part II is focused on the presentation of the other classes of toxic mushrooms along with an up-to-date review of the most recently identified poisonous varieties.

  17. Rockets -- Part II.

    ERIC Educational Resources Information Center

    Leitner, Alfred

    1982-01-01

    If two rockets are identical except that one engine burns in one-tenth the time of the other (total impulse and initial fuel mass of the two engines being the same), which rocket will rise higher? Why? The answer to this question (part 1 response in v20 n6, p410, Sep 1982) is provided. (Author/JN)

  18. Understanding Math - Part II.

    ERIC Educational Resources Information Center

    Wyks, Hollis W.; Austin, Robert J.

    This is the second remedial workbook-text in a two-part series written for deaf students at the secondary level. It covers fractions, geometry formulas, decimals and percents, and time. For the first workbook, see SE 015 827, and for the teacher's guide, see SE 015 829. (DT)

  19. Method and device for dynamic modelling of rubbery materials applied to human soft tissues. Part II: device and experimental results

    NASA Astrophysics Data System (ADS)

    Alaci, S.; Ciornei, M. C.; Ciornei, F. C.; Filote, C.; Romanu, I. C.

    2016-11-01

    The paper presents the experimental results obtained on an experimental device where a horizontal rubber wire is stretched by a transversal oscillating force - that is a body with an acceleration sensor attached, placed at the middle of it that oscillates freely. A nonlinear model was proposed for the experimental test rig, the differential equation of motion was offered and a series of curves were traced and compared to the experimental ones. One can conclude that the theoretical model certifies very well the behaviour of the real model. An open problem remains the manner of adopting the parameters characteristic to the dissipative element of the system.

  20. An Experimental Approach to the Functional Analysis of Text Building Behaviour. Part II. The Information Flow. No. 48.

    ERIC Educational Resources Information Center

    Bierschenk, Bernhard

    In contrast to the mass-related verbal flow description given in part I, this report focuses on the cooperative interaction of textual agents and objectives in the production of information flows. Perspective Text Analysis (PTA) is used with the purpose of establishing their physical and functional significance in a non-mass based description of…

  1. Hydrodynamic radius determination with asymmetrical flow field-flow fractionation using decaying cross-flows. Part II. Experimental evaluation.

    PubMed

    Magnusson, Emma; Håkansson, Andreas; Janiak, John; Bergenståhl, Björn; Nilsson, Lars

    2012-08-31

    In this study we investigate the effect of programmed cross-flows on the error in the hydrodynamic radii (r(h)) determination with asymmetrical flow field-flow fractionation (AsFlFFF). Three different standard polystyrene particles (nominal radii of 30 and 40 and 50 nm) are fractionated with exponentially and linearly decaying cross-flows with different decay rates. Hydrodynamic radii are calculated according to retention theory including steric effects. Rapid decay is expected to give rise to systematic deviations in r(h) determination. The error in r(h) was found to be small when decay rates with half-lives longer than 6 min were used, whereas steeper decays could give rise to errors as high as 16% of the particle size. The error is often explained in terms of secondary relaxation. However, comparisons show that experimental errors are significantly larger than what would be expected due to secondary relaxation, suggesting that other factors also have to be considered in order to fully understand deviations for rapidly decaying cross-flow.

  2. Improved Titanium Billet Inspection Sensitivity through Optimized Phased Array Design, Part II: Experimental Validation and Comparative Study with Multizone

    SciTech Connect

    Hassan, W.; Vensel, F.; Knowles, B.

    2006-03-06

    The inspection of critical rotating components of aircraft engines has made important advances over the last decade. The development of Phased Array (PA) inspection capability for billet and forging materials used in the manufacturing of critical engine rotating components has been a priority for Honeywell Aerospace. The demonstration of improved PA inspection system sensitivity over what is currently used at the inspection houses is a critical step in the development of this technology and its introduction to the supply base as a production inspection. As described in Part I (in these proceedings), a new phased array transducer was designed and manufactured for optimal inspection of eight inch diameter Ti-6Al-4V billets. After confirming that the transducer was manufactured in accordance with the design specifications a validation study was conducted to assess the sensitivity improvement of the PAI over the current capability of Multi-zone (MZ) inspection. The results of this study confirm the significant ({approx_equal} 6 dB in FBH number sign sensitivity) improvement of the PAI sensitivity over that of MZI.

  3. Statistical model based iterative reconstruction (MBIR) in clinical CT systems. Part II. Experimental assessment of spatial resolution performance

    SciTech Connect

    Li, Ke; Chen, Guang-Hong; Garrett, John; Ge, Yongshuai

    2014-07-15

    Purpose: Statistical model based iterative reconstruction (MBIR) methods have been introduced to clinical CT systems and are being used in some clinical diagnostic applications. The purpose of this paper is to experimentally assess the unique spatial resolution characteristics of this nonlinear reconstruction method and identify its potential impact on the detectabilities and the associated radiation dose levels for specific imaging tasks. Methods: The thoracic section of a pediatric phantom was repeatedly scanned 50 or 100 times using a 64-slice clinical CT scanner at four different dose levels [CTDI{sub vol} =4, 8, 12, 16 (mGy)]. Both filtered backprojection (FBP) and MBIR (Veo{sup ®}, GE Healthcare, Waukesha, WI) were used for image reconstruction and results were compared with one another. Eight test objects in the phantom with contrast levels ranging from 13 to 1710 HU were used to assess spatial resolution. The axial spatial resolution was quantified with the point spread function (PSF), while the z resolution was quantified with the slice sensitivity profile. Both were measured locally on the test objects and in the image domain. The dependence of spatial resolution on contrast and dose levels was studied. The study also features a systematic investigation of the potential trade-off between spatial resolution and locally defined noise and their joint impact on the overall image quality, which was quantified by the image domain-based channelized Hotelling observer (CHO) detectability index d′. Results: (1) The axial spatial resolution of MBIR depends on both radiation dose level and image contrast level, whereas it is supposedly independent of these two factors in FBP. The axial spatial resolution of MBIR always improved with an increasing radiation dose level and/or contrast level. (2) The axial spatial resolution of MBIR became equivalent to that of FBP at some transitional contrast level, above which MBIR demonstrated superior spatial resolution than

  4. Determination of the Clean Air Delivery Rate (CADR) of Photocatalytic Oxidation (PCO) Purifiers for Indoor Air Pollutants Using a Closed-Loop Reactor. Part II: Experimental Results.

    PubMed

    Héquet, Valérie; Batault, Frédéric; Raillard, Cécile; Thévenet, Frédéric; Le Coq, Laurence; Dumont, Éric

    2017-03-06

    The performances of a laboratory PhotoCatalytic Oxidation (PCO) device were determined using a recirculation closed-loop pilot reactor. The closed-loop system was modeled by associating equations related to two ideal reactors: a perfectly mixed reservoir with a volume of VR = 0.42 m³ and a plug flow system corresponding to the PCO device with a volume of VP = 5.6 × 10(-3) m³. The PCO device was composed of a pleated photocatalytic filter (1100 cm²) and two 18-W UVA fluorescent tubes. The Clean Air Delivery Rate (CADR) of the apparatus was measured under different operating conditions. The influence of three operating parameters was investigated: (i) light irradiance I from 0.10 to 2.0 mW·cm(-2); (ii) air velocity v from 0.2 to 1.9 m·s(-1); and (iii) initial toluene concentration C₀ (200, 600, 1000 and 4700 ppbv). The results showed that the conditions needed to apply a first-order decay model to the experimental data (described in Part I) were fulfilled. The CADR values, ranging from 0.35 to 3.95 m³·h(-1), were mainly dependent on the light irradiance intensity. A square root influence of the light irradiance was observed. Although the CADR of the PCO device inserted in the closed-loop reactor did not theoretically depend on the flow rate (see Part I), the experimental results did not enable the confirmation of this prediction. The initial concentration was also a parameter influencing the CADR, as well as the toluene degradation rate. The maximum degradation rate rmax ranged from 342 to 4894 ppbv/h. Finally, this study evidenced that a recirculation closed-loop pilot could be used to develop a reliable standard test method to assess the effectiveness of PCO devices.

  5. Thermal-Hydraulic Analysis of an Experimental Reactor Cavity Cooling System with Air. Part I: Experiments; Part II: Separate Effects Tests and Modeling

    SciTech Connect

    Corradin, Michael; Anderson, M.; Muci, M.; Hassan, Yassin; Dominguez, A.; Tokuhiro, Akira; Hamman, K.

    2014-10-15

    This experimental study investigates the thermal hydraulic behavior and the heat removal performance for a scaled Reactor Cavity Cooling System (RCCS) with air. A quarter-scale RCCS facility was designed and built based on a full-scale General Atomics (GA) RCCS design concept for the Modular High Temperature Gas Reactor (MHTGR). The GA RCCS is a passive cooling system that draws in air to use as the cooling fluid to remove heat radiated from the reactor pressure vessel to the air-cooled riser tubes and discharged the heated air into the atmosphere. Scaling laws were used to preserve key aspects and to maintain similarity. The scaled air RCCS facility at UW-Madison is a quarter-scale reduced length experiment housing six riser ducts that represent a 9.5° sector slice of the full-scale GA air RCCS concept. Radiant heaters were used to simulate the heat radiation from the reactor pressure vessel. The maximum power that can be achieved with the radiant heaters is 40 kW with a peak heat flux of 25 kW per meter squared. The quarter-scale RCCS was run under different heat loading cases and operated successfully. Instabilities were observed in some experiments in which one of the two exhaust ducts experienced a flow reversal for a period of time. The data and analysis presented show that the RCCS has promising potential to be a decay heat removal system during an accident scenario.

  6. Bioengineering studies of periodic external compression as prophylaxis against deep vein thrombosis-part II: experimental studies on a stimulated leg.

    PubMed

    Olson, D A; Kamm, R D; Shapiro, A H

    1982-05-01

    In this companion paper to "Part I: Numerical Simulations, " we report in vitro experimental studies performed on a simple model leg consisting of a "vein" of thin-walled latex tubing surrounded by "tissue" of open-pore foam rubber. Three modes of periodic external compression, were investigated: i) uniform compression; (ii) graded compression, decreasing from ankle to knee; and (iii) sequential compression, progressing from ankle to knee. The modes are compared on the basis of three hemodynamic criteria: degree of vessel collapse, level of fluid velocity, and level of shear stress. In uniform compression these measures of merit are distributed very nonuniformly along the length of the leg: they are high near the proximal end of the cuff but low elsewhere, a result due to the formation proximally of a partially occlusive throat. The latter does not form in either graded or sequential compression, with the consequence that favorable values of the three measures of merit occur more uniformly along the length of the pressurized region. It is concluded that either the graded or sequential mode of compression, or perhaps a combination of the two, would be more effective than uniform compression as a prophylaxis against deep vein thrombosis.

  7. Exploring Water Pollution. Part II

    ERIC Educational Resources Information Center

    Rillo, Thomas J.

    1975-01-01

    This is part two of a three part article related to the science activity of exploring environmental problems. Part one dealt with background information for the classroom teacher. Presented here is a suggested lesson plan on water pollution. Objectives, important concepts and instructional procedures are suggested. (EB)

  8. Variable viscosity and density biofilm simulations using an immersed boundary method, part II: Experimental validation and the heterogeneous rheology-IBM

    NASA Astrophysics Data System (ADS)

    Stotsky, Jay A.; Hammond, Jason F.; Pavlovsky, Leonid; Stewart, Elizabeth J.; Younger, John G.; Solomon, Michael J.; Bortz, David M.

    2016-07-01

    The goal of this work is to develop a numerical simulation that accurately captures the biomechanical response of bacterial biofilms and their associated extracellular matrix (ECM). In this, the second of a two-part effort, the primary focus is on formally presenting the heterogeneous rheology Immersed Boundary Method (hrIBM) and validating our model by comparison to experimental results. With this extension of the Immersed Boundary Method (IBM), we use the techniques originally developed in Part I ([19]) to treat biofilms as viscoelastic fluids possessing variable rheological properties anchored to a set of moving locations (i.e., the bacteria locations). In particular, we incorporate spatially continuous variable viscosity and density fields into our model. Although in [14,15], variable viscosity is used in an IBM context to model discrete viscosity changes across interfaces, to our knowledge this work and Part I are the first to apply the IBM to model a continuously variable viscosity field. We validate our modeling approach from Part I by comparing dynamic moduli and compliance moduli computed from our model to data from mechanical characterization experiments on Staphylococcus epidermidis biofilms. The experimental setup is described in [26] in which biofilms are grown and tested in a parallel plate rheometer. In order to initialize the positions of bacteria in the biofilm, experimentally obtained three dimensional coordinate data was used. One of the major conclusions of this effort is that treating the spring-like connections between bacteria as Maxwell or Zener elements provides good agreement with the mechanical characterization data. We also found that initializing the simulations with different coordinate data sets only led to small changes in the mechanical characterization results. Matlab code used to produce results in this paper will be available at https://github.com/MathBioCU/BiofilmSim.

  9. Expertise revisited, Part II: Contributory expertise.

    PubMed

    Collins, Harry; Evans, Robert; Weinel, Martin

    2016-04-01

    In Part I of this two part paper we tried to elicit the 'essence' of the notion of interactional expertise by looking at its origins. In Part II we will look at the notion of contributory expertise. The exercise has been triggered by recent discussion of these concepts in this journal by Plaisance and Kennedy and by Goddiksen.

  10. Air Pollution Control, Part II.

    ERIC Educational Resources Information Center

    Strauss, Werner, Ed.

    This book contains five major articles in areas of current importance in air pollution control. They are written by authors who are actively participating in the areas on which they report. It is the aim of each article to completely cover theory, experimentation, and practice in the field discussed. The contents are as follows: Emissions,…

  11. A musculoskeletal model of the equine forelimb for determining surface stresses and strains in the humerus-part II. Experimental testing and model validation.

    PubMed

    Pollock, Sarah; Stover, Susan M; Hull, M L; Galuppo, Larry D

    2008-08-01

    The first objective of this study was to experimentally determine surface bone strain magnitudes and directions at the donor site for bone grafts, the site predisposed to stress fracture, the medial and cranial aspects of the transverse cross section corresponding to the stress fracture site, and the middle of the diaphysis of the humerus of a simplified in vitro laboratory preparation. The second objective was to determine whether computing strains solely in the direction of the longitudinal axis of the humerus in the mathematical model was inherently limited by comparing the strains measured along the longitudinal axis of the bone to the principal strain magnitudes and directions. The final objective was to determine whether the mathematical model formulated in Part I [Pollock et al., 2008, ASME J. Biomech. Eng., 130, p. 041006] is valid for determining the bone surface strains at the various locations on the humerus where experimentally measured longitudinal strains are comparable to principal strains. Triple rosette strain gauges were applied at four locations circumferentially on each of two cross sections of interest using a simplified in vitro laboratory preparation. The muscles included the biceps brachii muscle in addition to loaded shoulder muscles that were predicted active by the mathematical model. Strains from the middle grid of each rosette, aligned along the longitudinal axis of the humerus, were compared with calculated principal strain magnitudes and directions. The results indicated that calculating strains solely in the direction of the longitudinal axis is appropriate at six of eight locations. At the cranial and medial aspects of the middle of the diaphysis, the average minimum principal strain was not comparable to the average experimental longitudinal strain. Further analysis at the remaining six locations indicated that the mathematical model formulated in Part I predicts strains within +/-2 standard deviations of experimental strains at

  12. 30 CFR Appendix II to Subpart D of... - Appendix II to Subpart D of Part 18

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... ACCESSORIES Machines Assembled With Certified or Explosion-Proof Components, Field Modifications of Approved Machines, and Permits To Use Experimental Equipment Pt. 18, Subpt. D, App. II Appendix II to Subpart D of Part 18 LIST OF FIGURES Figure No. Title 1 Typical layout drawing of a machine. 2 Sample bill...

  13. 30 CFR Appendix II to Subpart D of... - Appendix II to Subpart D of Part 18

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... ACCESSORIES Machines Assembled With Certified or Explosion-Proof Components, Field Modifications of Approved Machines, and Permits To Use Experimental Equipment Pt. 18, Subpt. D, App. II Appendix II to Subpart D of Part 18 LIST OF FIGURES Figure No. Title 1 Typical layout drawing of a machine. 2 Sample bill...

  14. Playing It Safe: Part II.

    ERIC Educational Resources Information Center

    Penman, Kenneth A.; Niccolai, Frances R.

    1985-01-01

    Explains how to prevent outdoor sports injuries; discusses related litigation and specific cases involving playing field turf, tennis, skiing, and pools; and sets out facility design and maintenance considerations and recommendations. A sidebar provides information about injury insurance available to NCAA schools. Part I of this article appeared…

  15. Local Area Networks: Part II.

    ERIC Educational Resources Information Center

    Dessy, Raymond E., Ed.

    1982-01-01

    Discusses five approaches used by industry/colleges to provide local area network (LAN) capabilities in the analytical laboratory: (1) mixed baseband bus network coupled to a star net; (2) broadband bus network; (3) ring network; (4) star network coupled to broadband net; and (5) simple multiprocessor center. Part I (September issue) focused on…

  16. Roots/Routes: Part II

    ERIC Educational Resources Information Center

    Swanson, Dalene M.

    2009-01-01

    This narrative acts as an articulation of a journey of many routes. Following Part I of the same research journey of rootedness/routedness, it debates the nature of transformation and transcendence beyond personal and political paradoxes informed by neoliberalism and related repressive globalizing discourses. Through a more personal, descriptive,…

  17. Understanding Radiation Thermometry. Part II

    NASA Technical Reports Server (NTRS)

    Risch, Timothy K.

    2015-01-01

    This document is a two-part course on the theory and practice of radiation thermometry. Radiation thermometry is the technique for determining the temperature of a surface or a volume by measuring the electromagnetic radiation it emits. This course covers the theory and practice of radiative thermometry and emphasizes the modern application of the field using commercially available electronic detectors and optical components. The course covers the historical development of the field, the fundamental physics of radiative surfaces, along with modern measurement methods and equipment.

  18. Revenue cycle management, Part II.

    PubMed

    Crew, Matt

    2007-01-01

    The proper management of your revenue cycle requires the application of "best practices" and the continual monitoring and measuring of the entire cycle. The correct technology will enable you to gain the insight and efficiencies needed in the ever-changing healthcare economy. The revenue cycle is a process that begins when you negotiate payor contracts, set fees, and schedule appointments and continues until claims are paid in full. Every single step in the cycle carries equal importance. Monitoring all phases and a commitment to continually communicating the results will allow you to achieve unparalleled success. In part I of this article, we explored the importance of contracting, scheduling, and case management as well as coding and clinical documentation. We will now take a closer look at the benefits charge capture, claim submission, payment posting, accounts receivable follow-up, and reporting can mean to your practice.

  19. Tubing extrusion made easier, Part II.

    PubMed

    Ferrandino, Mike

    2004-11-01

    An increased understanding of the primary elements will lead to greater control of the extrusion process. In the ongoing quest to produce tubing with consistent properties. Part II of this two-part article makes recommendations on best practice in barrel and screw design, compression ratios and dies.

  20. Sports Concussion Management: part II.

    PubMed

    Terrell, Thomas R; Cox, Conrad B; Bielak, Ken; Casmus, Robert; Laskowitz, Daniel; Nichols, Gregory

    2014-02-01

    Millions of concussions occur every year in the United States. The public interest in concussion has increased after a number of high-profile deaths in high school athletes from sports-related head trauma and in some professional athletes from chronic traumatic encephalopathy. One of the most active areas of research in sports medicine during the last decade has been the evaluation and management of concussion. In this second article of a two-part series, we provide an overview of the latest scientific advances in concussion research. This overview includes an update on the pathobiological changes that occur during concussion and the results of biomechanical studies. In addition, to aid the practicing clinician, we review the literature on proven and currently studied concussion risk factors, including a history of concussion, fatigue, and age. Genetic polymorphisms and biomarkers may provide risk-prediction capability, but at present the research remains inconclusive. Diffusion tensor imaging and functional magnetic resonance imaging are promising technologies that reveal more sophisticated data about the impact of concussion on the brain. We review the existing literature on the application of these neuroimaging modalities to sports concussion. An update from the Fourth International Conference on Concussion in Sport, with highlights of new recommendations, and the presentation of the third edition of the Sports Concussion Assessment Tool to evaluate acute concussion, concludes our review.

  1. Fatigue Life Prediction of Carbon Fiber-Reinforced Ceramic-Matrix Composites at Room and Elevated Temperatures. Part II: Experimental Comparisons

    NASA Astrophysics Data System (ADS)

    Longbiao, Li

    2015-12-01

    This paper follows on from the earlier study (Part I) which investigated the fatigue behavior of unidirectional, cross-ply and 2.5D C/SiC composites at room and elevated temperatures. In this paper, a micromechanics approach to predict the fatigue life S-N curves of fiber-reinforced CMCs has been developed considering the fatigue damage mechanism of interface wear or interface oxidation. Upon first loading to fatigue peak stress, matrix multicracking and fiber/matrix interface debonding occur. The two-parameter Weibull model is used to describe fibers strength distribution. The stress carried by broken and intact fibres on the matrix crack plane under fatigue loading is determined based on the Global Load Sharing (GLS) criterion. The fibres failure probabilities under fatigue loading considering the degradation of interface shear stress and fibres strength have been obtained. When the broken fibres fraction approaches critical value, the composite would fatigue fail. The fatigue life S-N curves of unidirectional, cross-ply and 2.5D C/SiC composites at room and elevated temperatures have been predicted. The predicted results agreed with experimental data.

  2. Epilepsy Care in Developing Countries: Part II of II

    PubMed Central

    Birbeck, Gretchen L

    2010-01-01

    Although 80% of people with epilepsy reside in resource poor, developing countries, epilepsy care in these regions remains limited and the majority of epilepsy patients go untreated. Cost-effective, sustainable epilepsy care services, delivering first-line antiepileptic drugs through established primary health care facilities, are needed to decrease these treatment gaps. Neurologists with local experience and knowledge of the culture, who are willing to serve as educators, policy advisors, and advocates, can make a difference. This is Part II of a two-part article. Part I reviewed the burden of epilepsy and the current state of resources for treatment in developing countries, while Part II will now discuss various aspects of care in these countries. PMID:20944819

  3. Globalization in the pharmaceutical industry, Part II.

    PubMed

    Casadio Tarabusi, C; Vickery, G

    1998-01-01

    This is the second of a two-part report on the pharmaceutical industry. Part II begins with a discussion of foreign direct investment and inter-firm networks, which covers international mergers, acquisitions, and minority participation; market shares of foreign-controlled firms; international collaboration agreements (with a special note on agreements in biotechnology); and licensing agreements. The final section of the report covers governmental policies on health and safety regulation, price regulation, industry and technology, trade, foreign investment, protection of intellectual property, and competition.

  4. Analysis of the quench propagation along Nb3Sn Rutherford cables with the THELMA code. Part II: Model predictions and comparison with experimental results

    NASA Astrophysics Data System (ADS)

    Manfreda, G.; Bellina, F.; Bajas, H.; Perez, J. C.

    2016-12-01

    To improve the technology of the new generation of accelerator magnets, prototypes are being manufactured and tested in several laboratories. In parallel, many numerical analyses are being carried out to predict the magnets behaviour and interpret the experimental results. This paper focuses on the quench propagation velocity, which is a crucial parameter as regards the energy dissipation along the magnet conductor. The THELMA code, originally developed for cable-in-conduit conductors for fusion magnets, has been used to study such quench propagation. To this purpose, new code modules have been added to describe the Rutherford cable geometry, the material non-linear thermal properties and to describe the thermal conduction problem in transient regime. THELMA can describe the Rutherford cable at the strand level, modelling both the electrical and thermal contact resistances between strands and enabling the analysis of the effects of local hot spots and quench heaters. This paper describes the model application to a sample of Short Model Coil tested at CERN: a comparison is made between the experimental results and the model prediction, showing a good agreement. A comparison is also made with the prediction of the most common analytical models, which give large inaccuracies when dealing with low n-index cables like Nb3Sn cables.

  5. Localization-based super-resolution microscopy with an sCMOS camera part II: experimental methodology for comparing sCMOS with EMCCD cameras.

    PubMed

    Long, Fan; Zeng, Shaoqun; Huang, Zhen-Li

    2012-07-30

    Nowadays, there is a hot debate among industry and academic researchers that whether the newly developed scientific-grade Complementary Metal Oxide Semiconductor (sCMOS) cameras could become the image sensors of choice in localization-based super-resolution microscopy. To help researchers find answers to this question, here we reported an experimental methodology for quantitatively comparing the performance of low-light cameras in single molecule detection (characterized via image SNR) and localization (via localization accuracy). We found that a newly launched sCMOS camera can present superior imaging performance than a popular Electron Multiplying Charge Coupled Device (EMCCD) camera in a signal range (15-12000 photon/pixel) more than enough for typical localization-based super-resolution microscopy.

  6. Fuel and fission product behaviour in early phases of a severe accident. Part II: Interpretation of the experimental results of the PHEBUS FPT2 test

    NASA Astrophysics Data System (ADS)

    Dubourg, R.; Barrachin, M.; Ducher, R.; Gavillet, D.; De Bremaecker, A.

    2014-10-01

    One objective of the FPT2 test of the PHEBUS FP Program was to study the degradation of an irradiated UO2 fuel bundle and the fission product behaviour under conditions of low steam flow. The results of the post-irradiation examinations (PIE) at the upper levels (823 mm and 900 mm) of the test section previously reported are interpreted in the present paper. Solid state interactions between fuel and cladding have been compared with the characteristics of interaction identified in the previous separate-effect tests. Corium resulting from the interaction between fuel and cladding was formed. The uranium concentration in the corium is compared to analytical tests and a scenario for the corium formation is proposed. The analysis showed that, despite the rather low fuel burn up, the conditions of temperature and oxygen potential reached during the starvation phase are able to give an early very significant release fraction of caesium. A significant part (but not all) of the molybdenum was segregated at grain boundaries and trapped in metallic inclusions from which they were totally removed in the final part of the experiment. During the steam starvation phase, the conditions of oxygen potential were favourable for the formation of simple Ba and BaO chemical forms but the temperature was too low to provoke their volatility. This is one important difference with out-of-pile experiments such as VERCORS for which only a combination of high temperature and low oxygen potential induced a significant barium release. Finally another significant difference with analytical out-of-pile experiments comes from the formation of foamy zones due to the fission gas presence in FPT2-type experiments which give an additional possibility for the formation of stable fission product compounds.

  7. Aspidosperma (Apocynaceae) plant cytotoxicity and activity towards malaria parasites. Part II: experimental studies with Aspidosperma ramiflorum in vivo and in vitro

    PubMed Central

    Aguiar, Anna CC; Cunha, Ananda C; Ceravolo, Isabela Penna; Gonçalves, Regina A Correia; Oliveira, Arildo JB; Krettli, Antoniana Ursine

    2015-01-01

    Several species of Aspidosperma plants are used to treat diseases in the tropics, including Aspidosperma ramiflorum, which acts against leishmaniasis, an activity that is experimentally confirmed. The species, known as guatambu-yellow, yellow peroba, coffee-peroba andmatiambu, grows in the Atlantic Forest of Brazil in the South to the Southeast regions. Through a guided biofractionation of A. ramiflorum extracts, the plant activity against Plasmodium falciparum was evaluated in vitro for toxicity towards human hepatoma G2 cells, normal monkey kidney cells and nonimmortalised human monocytes isolated from peripheral blood. Six of the seven extracts tested were active at low doses (half-maximal drug inhibitory concentration < 3.8 µg/mL); the aqueous extract was inactive. Overall, the plant extracts and the purified compounds displayed low toxicity in vitro. A nonsoluble extract fraction and one purified alkaloid isositsirikine (compound 5) displayed high selectivity indexes (SI) (= 56 and 113, respectively), whereas compounds 2 and 3 were toxic (SI < 10). The structure, activity and low toxicity of isositsirikine in vitro are described here for the first time in A. ramiflorum, but only the neutral and precipitate plant fractions were tested for activity, which caused up to 53% parasitaemia inhibition of Plasmodium berghei in mice with blood-induced malaria. This plant species is likely to be useful in the further development of an antimalarial drug, but its pharmacological evaluation is still required. PMID:26560981

  8. Aspidosperma (Apocynaceae) plant cytotoxicity and activity towards malaria parasites. Part II: experimental studies withAspidosperma ramiflorum in vivo and in vitro.

    PubMed

    Aguiar, Anna C C; Cunha, Ananda C; Ceravolo, Isabela Penna; Gonçalves, Regina A Correia; Oliveira, Arildo J B; Krettli, Antoniana Ursine

    2015-11-01

    Several species of Aspidosperma plants are used to treat diseases in the tropics, including Aspidosperma ramiflorum, which acts against leishmaniasis, an activity that is experimentally confirmed. The species, known as guatambu-yellow, yellow peroba, coffee-peroba and matiambu, grows in the Atlantic Forest of Brazil in the South to the Southeast regions. Through a guided biofractionation of A. ramiflorum extracts, the plant activity against Plasmodium falciparum was evaluated in vitro for toxicity towards human hepatoma G2 cells, normal monkey kidney cells and nonimmortalised human monocytes isolated from peripheral blood. Six of the seven extracts tested were active at low doses (half-maximal drug inhibitory concentration < 3.8 µg/mL); the aqueous extract was inactive. Overall, the plant extracts and the purified compounds displayed low toxicity in vitro. A nonsoluble extract fraction and one purified alkaloid isositsirikine (compound 5) displayed high selectivity indexes (SI) (= 56 and 113, respectively), whereas compounds 2 and 3 were toxic (SI < 10). The structure, activity and low toxicity of isositsirikine in vitro are described here for the first time in A. ramiflorum, but only the neutral and precipitate plant fractions were tested for activity, which caused up to 53% parasitaemia inhibition of Plasmodium berghei in mice with blood-induced malaria. This plant species is likely to be useful in the further development of an antimalarial drug, but its pharmacological evaluation is still required.

  9. The effects of high molecular weight hyaluronic acid (Hylan G-F 20) on experimentally induced temporomandibular joint osteoartrosis: part II.

    PubMed

    Duygu, G; Güler, N; Cam, B; Kürkçü, M

    2011-12-01

    The aim of this study was to determine the efficacy of Hylan G-F 20 on experimentally induced osteoarthritic changes in rabbit temporomandibular joint (TMJ). A 3mg/ml concentration of sodium mono iodoacetate (MIA) had been injected into both joints of 24 rabbits to create osteoartrosis. The study group was injected with Hylan G-F 20 in one joint and saline in the contralateral joint as a control (once a week for 3 weeks). Histological changes in articular cartilage, osteochondral junction, chondrocyte appearance and subchondral bone were determined at 4, 6, and 8 weeks. Regarding cartilage, there was a statistically significant difference between the two groups at 4 weeks. Degenerative bony changes to subchondral bone were significantly higher in the controls. No statistical difference was found in the study group at 6 weeks. A positive correlation was found between osteochondral junction and subchondral bone in the study group at 8 weeks. The changes in chondrocyte appearance were significantly decreased in the study group at all follow-up times. Intra-articular injection of Hylan G-F 20 decreased cartilage changes in early stage TMJ osteoartrosis and clustering of chondrocytes showed the chondroprotective effects of Hylan G-F 20 caused by hypertrophic responses.

  10. 10 CFR Appendix II to Part 504 - Fuel Price Computation

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 4 2011-01-01 2011-01-01 false Fuel Price Computation II Appendix II to Part 504 Energy DEPARTMENT OF ENERGY (CONTINUED) ALTERNATE FUELS EXISTING POWERPLANTS Pt. 504, App. II Appendix II to Part 504—Fuel Price Computation (a) Introduction. This appendix provides the equations and...

  11. 10 CFR Appendix II to Part 504 - Fuel Price Computation

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 4 2012-01-01 2012-01-01 false Fuel Price Computation II Appendix II to Part 504 Energy DEPARTMENT OF ENERGY (CONTINUED) ALTERNATE FUELS EXISTING POWERPLANTS Pt. 504, App. II Appendix II to Part 504—Fuel Price Computation (a) Introduction. This appendix provides the equations and...

  12. 10 CFR Appendix II to Part 504 - Fuel Price Computation

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Fuel Price Computation II Appendix II to Part 504 Energy DEPARTMENT OF ENERGY (CONTINUED) ALTERNATE FUELS EXISTING POWERPLANTS Pt. 504, App. II Appendix II to Part... example fuel price and inflation indices based on the latest data appearing in the Energy...

  13. 40 CFR Appendix II to Part 261 - [Reserved

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 25 2010-07-01 2010-07-01 false II Appendix II to Part 261 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) IDENTIFICATION AND LISTING OF HAZARDOUS WASTE Appendix II to Part 261...

  14. 10 CFR Appendix II to Part 504 - Fuel Price Computation

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... equations II-1 and II-2. This table contains annual fuel price indices for distillate oil, residual oil... i = MPB where: FPB i = Price of the proposed fuel (distillate oil, residual oil, or natural gas) in... 10 Energy 4 2014-01-01 2014-01-01 false Fuel Price Computation II Appendix II to Part 504...

  15. Critical appraisal: dental amalgam update--part II: biological effects.

    PubMed

    Wahl, Michael J; Swift, Edward J

    2013-12-01

    Dental amalgam restorations have been controversial for over 150 years. In Part I of this Critical Appraisal, the clinical efficacy of dental amalgam was updated. Here in Part II, the biological effects of dental amalgam are addressed.

  16. 10 CFR Appendix II to Part 504 - Fuel Price Computation

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... II-2. This table contains annual fuel price indices for distillate oil, residual oil, natural gas...=Price of the proposed fuel (distillate oil, residual oil, or natural gas) in year i. MPB=The current... 10 Energy 4 2013-01-01 2013-01-01 false Fuel Price Computation II Appendix II to Part 504...

  17. 40 CFR Appendix II to Part 86 - Temperature Schedules

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 19 2011-07-01 2011-07-01 false Temperature Schedules II Appendix II... Appendix II to Part 86—Temperature Schedules (a) Ambient temperature cycle for the diurnal emission portion of the evaporative emission test (see § 86.133). Table I—Temperature Versus Time Sequence Use...

  18. 40 CFR Appendix II to Part 86 - Temperature Schedules

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 20 2012-07-01 2012-07-01 false Temperature Schedules II Appendix II... Appendix II to Part 86—Temperature Schedules (a) Ambient temperature cycle for the diurnal emission portion of the evaporative emission test (see § 86.133). Table I—Temperature Versus Time Sequence Use...

  19. 40 CFR Appendix II to Part 86 - Temperature Schedules

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 19 2010-07-01 2010-07-01 false Temperature Schedules II Appendix II... Appendix II to Part 86—Temperature Schedules (a) Ambient temperature cycle for the diurnal emission portion of the evaporative emission test (see § 86.133). Table I—Temperature Versus Time Sequence Use...

  20. 40 CFR Appendix II to Part 86 - Temperature Schedules

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 20 2013-07-01 2013-07-01 false Temperature Schedules II Appendix II... Appendix II to Part 86—Temperature Schedules (a) Ambient temperature cycle for the diurnal emission portion of the evaporative emission test (see § 86.133). Table I—Temperature Versus Time Sequence Use...

  1. 40 CFR Appendixes I-Ii to Part 268 - [Reserved

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 28 2013-07-01 2013-07-01 false I Appendixes I-II to Part 268 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) LAND DISPOSAL RESTRICTIONS Appendixes I-II to Part 268...

  2. 40 CFR Appendixes I-Ii to Part 268 - [Reserved

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 28 2012-07-01 2012-07-01 false I Appendixes I-II to Part 268 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) LAND DISPOSAL RESTRICTIONS Appendixes I-II to Part 268...

  3. 40 CFR Appendixes I-Ii to Part 268 - [Reserved

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 27 2011-07-01 2011-07-01 false I Appendixes I-II to Part 268 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) LAND DISPOSAL RESTRICTIONS Appendixes I-II to Part 268...

  4. 40 CFR Appendixes I-Ii to Part 268 - [Reserved

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 26 2010-07-01 2010-07-01 false I Appendixes I-II to Part 268 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) LAND DISPOSAL RESTRICTIONS Appendixes I-II to Part 268...

  5. 40 CFR Appendixes I-Ii to Part 268 - [Reserved

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 27 2014-07-01 2014-07-01 false I Appendixes I-II to Part 268 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) LAND DISPOSAL RESTRICTIONS Appendixes I-II to Part 268...

  6. Reclaiming Kindergarten: Part II--Questions about Policy

    ERIC Educational Resources Information Center

    Gullo, Dominic F.; Hughes, Kim

    2011-01-01

    Part II of "Reclaiming Kindergarten" continues the discussion related to responding to the crisis in today's kindergarten. In Part II, two policy questions are posed, the answers to which seek to respond to this continuing crisis. The questions center on issues related to engaging families in kindergarten and the need to consider a new early…

  7. Talking about the Weather, Part II.

    ERIC Educational Resources Information Center

    Gibb, Allan A.

    1984-01-01

    This second part of a two-part article highlights some mathematics involved in the study of meteorology. Examples are given of the application of mathematics to the study of the atmosphere, with three problems discussed. (MNS)

  8. Water Pollution: Part I, Municipal Wastewaters; Part II, Industrial Wastewaters.

    ERIC Educational Resources Information Center

    Fowler, K. E. M.

    This publication is an annotated bibliography of municipal and industrial wastewater literature. This publication consists of two parts plus appendices. Part one is entitled Municipal Wastewaters and includes publications in such areas as health effects of polluted waters, federal policy and legislation, biology and chemistry of polluted water,…

  9. Phenomenology of electromagnetic coupling. Part II

    SciTech Connect

    King, R.J.; Ludwigsen, A.P.; Kunz, K.S.

    1985-08-01

    This report is the second of a planned series which summarize efforts at Lawrence Livermore National Laboratory relating to phenomenology studies of back door coupling from several MHz to 10's of GHz. These studies are pertinent to high altitude EMP (HEMP), enhanced HEMP and microwave coupling. Part I dealt with coupling through apertures into large free-standing cavities having, at most, one interior cable. An overview of the effort is given, and a summary of the effects observed in Part I. The main effort since Part I has been devoted to Facilities Development, development of an interior coupling decomposition model and coupling experiments. Projected future effort is discussed.

  10. Fire prevention on airplanes. Part II

    NASA Technical Reports Server (NTRS)

    Sabatier, J

    1929-01-01

    This part of the report presents a detailed examination of spark prevention, fire extinguishers, and fuel tank location and design. A continued program of investigations and research is also proposed.

  11. Electric injury, Part II: Specific injuries.

    PubMed

    Fish, R M

    2000-01-01

    Electric injury can cause disruption of cardiac rhythm and breathing, burns, fractures, dislocations, rhabdomyolysis, eye and ear injury, oral and gastrointestinal injury, vascular damage, disseminated intravascular coagulation, peripheral and spinal cord injury, and Reflex Sympathetic Dystrophy. Secondary trauma from falls, fires, flying debris, and inhalation injury can complicate the clinical picture. Diagnostic and treatment considerations for electric injuries are described in this article, which is the second part of a three-part series on electric injuries.

  12. Prescription pricing across Canada (Part II).

    PubMed

    Archer, F

    1984-09-01

    The first of a two part article entitled "Prescription Pricing Across Canada" appeared in the June issue of CPJ. The article was prompted by recent press reports of a prescription drug study commissioned by the Saskatchewan government, and the consequent attention-getting headlines. The first article dealt with the Western provinces. The second part discusses prescription pricing in Ontario, Québec, New Brunswick, Nova Scotia, Prince Edward Island, Newfoundland, and the Northwest Territories.

  13. Teaching Elementary Particle Physics, Part II

    ERIC Educational Resources Information Center

    Hobson, Art

    2011-01-01

    In order to explain certain features of radioactive beta decay, Wolfgang Pauli suggested in 1930 that the nucleus emitted, in addition to a beta particle, another particle of an entirely new type. The hypothesized particle, dubbed the neutrino, would not be discovered experimentally for another 25 years. It's not easy to detect neutrinos, because…

  14. Inquiry and Living History, Part II

    ERIC Educational Resources Information Center

    Coatney, Sharon; Smalley, Rachel

    2006-01-01

    In the first part of this article, the authors introduced the living history program. This yearly, weeklong program features living portrayals of famous people, which becomes a catalyst for teaching curricular standards, as well as providing the spark for inquiry. Successful implementation of this program requires providing teachers with…

  15. The Metis Nation--Part Two II.

    ERIC Educational Resources Information Center

    Dorian, John

    1978-01-01

    This article deals with historical events involving the Metis people from the time Manitoba entered the Confederation to the conclusion of the 1885 battle at Fish Creek near Batoche, Saskatchewan. Part I is in the Summer, 1978 issue of the Northian. (Author/RTS)

  16. Cutting out the Middleman: Part II.

    ERIC Educational Resources Information Center

    Hansen, Shirley; Crittenden, Chris

    1985-01-01

    The second part of the article published in "American School and University," December 1984 (EA 518 236), outlines specific steps administrators need to take to determine whether or not a direct purchase of natural gas is going to benefit their schools. (MLF)

  17. 40 CFR Appendix II to Part 86 - Temperature Schedules

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 19 2014-07-01 2014-07-01 false Temperature Schedules II Appendix II... to Part 86—Temperature Schedules (a) Ambient temperature cycle for the diurnal emission portion of the evaporative emission test (see § 86.133). Table I—Temperature Versus Time Sequence Use...

  18. Wound healing: part II. Clinical applications.

    PubMed

    Janis, Jeffrey; Harrison, Bridget

    2014-03-01

    Treatment of all wounds requires adequate wound bed preparation, beginning with irrigation and débridement. Complicated or chronic wounds may also require treatment adjuncts or specialized wound healing products. An extensive body of research and development has introduced novel wound healing therapies and scar management options. In this second of a two-part continuing medical education series on wound healing, the reader is offered an update on current wound healing technologies and recommendations for obtaining optimal outcomes.

  19. Drugs, money and society (Part II).

    PubMed

    Walley, Tom

    2010-09-01

    Pharmacoeconomics started as marketing but has developed into a valuable tool in the fuller assessment of drug therapies. Its principles are now widely accepted, and many countries have government-funded agencies with responsibility for its application, most notably the National Institute for Health and Clinical Excellence in England. Many clinical pharmacologists are active in this area, and the discipline itself is part of the clinical pharmacology trainees' curriculum. Further developments will include value-based pricing and its use in cost sharing arrangements between health service and manufacturers.

  20. Treatment of superficial mycoses: review - part II*

    PubMed Central

    Dias, Maria Fernanda Reis Gavazzoni; Bernardes-Filho, Fred; Quaresma-Santos, Maria Victória Pinto; Amorim, Adriana Gutstein da Fonseca; Schechtman, Regina Casz; Azulay, David Rubem

    2013-01-01

    Superficial fungal infections of the hair, skin and nails are a major cause of morbidity in the world. Choosing the right treatment is not always simple because of the possibility of drug interactions and side effects. The first part of the article discusses the main treatments for superficial mycoses - keratophytoses, dermatophytosis, candidiasis, with a practical approach to the most commonly-used topical and systemic drugs , referring also to their dosage and duration of use. Promising new, antifungal therapeutic alternatives are also highlighted, as well as available options on the Brazilian and world markets. PMID:24474103

  1. Teaching Elementary Particle Physics, Part II

    NASA Astrophysics Data System (ADS)

    Hobson, Art

    2011-03-01

    In order to explain certain features of radioactive beta decay, Wolfgang Pauli suggested in 1930 that the nucleus emitted, in addition to a beta particle, another particle of an entirely new type. The hypothesized particle, dubbed the neutrino, would not be discovered experimentally for another 25 years. It's not easy to detect neutrinos, because they respond to neither the EM force nor the strong force. For example, the mean free path (average penetration distance before it interacts) of a typical beta-decay neutrino moving through solid lead is about 1.5 light years! Enrico Fermi argued that neutrinos indicated a new force was at work. During the 1930s, he quickly adapted ideas from the developing new theory of QED to this new force, dubbed the weak force. Fermi's theory was able to predict the half-lives of beta-emitting nuclei and the range of energies of the emitted beta particles.

  2. Biosimilars in Dermatology: Current Situation (Part II).

    PubMed

    Puig, L; Carretero, G; Daudén, E; Ferrándiz, C; Marrón, S E; Martorell, A; Pérez-Suárez, B; Rodriguez-Cerdeira, C; Ruiz-Villaverde, R; Sánchez-Carazo, J L; Velasco, M

    2015-09-01

    The first biosimilar version of a biologic agent used to treat psoriasis (infliximab) entered the Spanish market on February 16 of this year, and more biosimilars can be expected to follow in the coming months and years. Logically, this new situation will have economic repercussions and alter prescribing patterns among dermatologists. In this second part of the review, we will look at several somewhat contentious issues, such as the extrapolation of indications, interchangeability, and automatic substitution. We will also review the biosimilars with indications for psoriasis currently in the clinical development pipeline and assess their potential to offer comparable efficacy and safety to the reference product while contributing to the sustainability of the public health care system.

  3. Bases of Radio Direction Finding, Part II

    DTIC Science & Technology

    1977-12-22

    FTD-ID(RS)T-2232-77 Part 2 of 2 FOREIGN TECHNOLOGY DIVISION BASES OF RADIO DIRECTION FINDING by I. S. Kukes, M. Ye. Starik -3- 0DAM Approved for...FOREIGN TECHNOLOGY DI- FOREIGN TECHNOLOGY DIVISION I VISION. j WP.AFB, OHIO. FTD- ID(RS)T-2232-77 Date22 Dec 1977 Table of Contents U.S. Board on...2939, Nt 8, LTI). 3. 11.2 WI ir-p x( o a~ B. B OcitowiwN -punpcKi:. si’Hovim’ paAisonve.1CI* MONil . PCJA.-.It3A. OTA. A9JI1041-1oTS, .1943. 11.3. C a R

  4. Submodeling Simulations in Fusion Welds: Part II

    NASA Astrophysics Data System (ADS)

    Bonifaz, E. A.

    2013-11-01

    In part I, three-dimensional transient non-linear sub modeling heat transfer simulations were performed to study the thermal histories and thermal cycles that occur during the welding process at the macro, meso and micro scales. In the present work, the corresponding non-uniform temperature changes were imposed as load conditions on structural calculations to study the evolution of localized plastic strains and residual stresses at these sub-level scales. To reach the goal, a three-dimensional finite element elastic-plastic model (ABAQUS code) was developed. The sub-modeling technique proposed to be used in coupling phase-field (and/or digital microstructures) codes with finite element codes, was used to mesh a local part of the model with a refined mesh based on interpolation of the solution from an initial, relatively coarse, macro global model. The meso-sub-model is the global model for the subsequent micro sub-model. The strategy used to calculate temperatures, strains and residual stresses at the macro, meso and micro scale level, is very flexible to be used to any number of levels. The objective of this research was to initiate the development of microstructural models to identify fusion welding process parameters for preserving the single crystal nature of gas turbine blades during repair procedures. The multi-scale submodeling approach can be used to capture weld pool features at the macro-meso scale level, and micro residual stress and secondary dendrite arm spacing features at the micro scale level.

  5. Kick, Glide, Pole! Cross-Country Skiing Fun (Part II)

    ERIC Educational Resources Information Center

    Duoos, Bridget A.

    2012-01-01

    Part I of Kick, Glide, Pole! Cross-Country Skiing Fun, which was published in last issue, discussed how to select cross-country ski equipment, dress for the activity and the biomechanics of the diagonal stride. Part II focuses on teaching the diagonal stride technique and begins with a progression of indoor activities. Incorporating this fun,…

  6. Photoprotection: part II. Sunscreen: development, efficacy, and controversies.

    PubMed

    Jansen, Rebecca; Osterwalder, Uli; Wang, Steven Q; Burnett, Mark; Lim, Henry W

    2013-12-01

    In addition to the naturally occurring, physical, and systemic photoprotective agents reviewed in part I, topical ultraviolet radiation filters are an important cornerstone of photoprotection. Sunscreen development, efficacy, testing, and controversies are reviewed in part II of this continuing medical education article.

  7. A Physicist for All Seasons: Part II

    NASA Astrophysics Data System (ADS)

    Oppenheimer, Frank

    2013-06-01

    The second part of this interview covers Frank Oppenheimer's move to the University of California at Berkeley and wartime work at the Westinghouse Research Laboratories in Pittsburgh, Pennsylvania, at the electromagnetic-separation plant in Oak Ridge, Tennessee, and at Los Alamos, New Mexico (1941-1945); his postwar research at Berkeley (1945-1947); his appointment at the University of Minnesota in 1947 and firing two years later after being required to testify before the House Un-American Activities Committee; his decade as a rancher in Colorado (1949-1959) and high-school science teacher toward the end of this period; his research at the University of Colorado in Boulder after 1959; his year as a Guggenheim Fellow at University College London in 1965; and his founding of the Exploratorium in San Francisco. California, in 1969. He also discusses his wartime relations with his older brother Robert and postwar events in Robert's life, including his Hearings before the Personnel Security Board of the Atomic Energy Commission in 1954.

  8. Overactive bladder - 18 years - Part II.

    PubMed

    Truzzi, Jose Carlos; Gomes, Cristiano Mendes; Bezerra, Carlos A; Plata, Ivan Mauricio; Campos, Jose; Garrido, Gustavo Luis; Almeida, Fernando G; Averbeck, Marcio Augusto; Fornari, Alexandre; Salazar, Anibal; Dell'Oro, Arturo; Cintra, Caio; Sacomani, Carlos Alberto Ricetto; Tapia, Juan Pablo; Brambila, Eduardo; Longo, Emilio Miguel; Rocha, Flavio Trigo; Coutinho, Francisco; Favre, Gabriel; Garcia, Jose Antonio; Castano, Juan; Reyes, Miguel; Leyton, Rodrigo Eugenio; Ferreira, Ruiter Silva; Duran, Sergio; Lopez, Vanda; Reges, Ricardo

    2016-01-01

    Traditionally, the treatment of overactive bladder syndrome has been based on the use of oral medications with the purpose of reestablishing the detrusor stability. The recent better understanding of the urothelial physiology fostered conceptual changes, and the oral anticholinergics - pillars of the overactive bladder pharmacotherapy - started to be not only recognized for their properties of inhibiting the detrusor contractile activity, but also their action on the bladder afference, and therefore, on the reduction of the symptoms that constitute the syndrome. Beta-adrenergic agonists, which were recently added to the list of drugs for the treatment of overactive bladder, still wait for a definitive positioning - as either a second-line therapy or an adjuvant to oral anticholinergics. Conservative treatment failure, whether due to unsatisfactory results or the presence of adverse side effects, define it as refractory overactive bladder. In this context, the intravesical injection of botulinum toxin type A emerged as an effective option for the existing gap between the primary measures and more complex procedures such as bladder augmentation. Sacral neuromodulation, described three decades ago, had its indication reinforced in this overactive bladder era. Likewise, the electric stimulation of the tibial nerve is now a minimally invasive alternative to treat those with refractory overactive bladder. The results of the systematic literature review on the oral pharmacological treatment and the treatment of refractory overactive bladder gave rise to this second part of the review article Overactive Bladder - 18 years, prepared during the 1st Latin-American Consultation on Overactive Bladder.

  9. Wave Propagation in Polymers, Part II

    NASA Astrophysics Data System (ADS)

    Newlander, David C.; Charest, Jacques A.; Lilly, Martin D.; Eisler, Robert D.

    1999-06-01

    Work reported in a previous study (Wave Propagations in Polymers, Part I, J.A. Charest, M.D. Lilly, 44th ARA Meeting Munich, Germany Sept. 17-20, 1993) discussed gas gun plane wave impact work and the measurements of stress wave profiles in Polycarbonate at around 2 kbars. The wave profiles were obtained using combined carbon and PVDF thin film stress gauges. The results showed amplitude attenuation and dispersion effects which were neither expected nor predictable from available hydrocode models. The data have been revisited using a modified material model and the PUFF74 computer code. These new wave profile calculations show remarkable agreement with the previous experiments in Polycarbonate. The model treats the material as viscoelastic-plastic using methods developed by Bade (Dynamic Response Model for PMMA, W. L. Bade, AVCO Systems Division, TR K500-74-WLB-204, Oct. 1, 1974). The measured and calculated results are quite different from those exhibited by PMMA at similar impact conditions. This work is expected to further our understanding of the processes that control wave propagation in highly-compressible and viscoelastic/viscoplastic media. It is also expected to provide clues on the effects of high strain rates on properties such as the modulus of elasticity, strength, and material loading behavior.

  10. DICOM: key concepts--part II.

    PubMed

    Kabachinski, Jeff

    2005-01-01

    The objective of these two installments of IT World was to give a general overview of DICOM and to take a look at different parts of the standard to get a sense of its main themes. We found that the standard provides a common reference for all developers but does not impose a single type of implementation. This allows for innovation. The standard is also built for flexibility, able to adapt to new modalities that have a need to communicate. The speedy acceptance of DICOM by the medical imaging industry is opening new possibilities for healthcare organizations to increase the quality while decreasing the cost of patient care. All of the DICOM networked supporting medical equipment as well as the organization's computer systems made by multiple original equipment manufacturers and located at one site or many sites can communicate by means of DICOM. This gives us the opportunity for medical images to be captured and communicated quicker. The result enables physicians to make diagnoses and treatment decisions sooner. It's all good stuff and even more reason why we should endeavor to understand the basics of DICOM. DICOM is here to stay!

  11. Minimizing Glovebox Glove Breaches: PART II.

    SciTech Connect

    Cournoyer, M. E.; Andrade, R.M.; Taylor, D. J.; Stimmel, J. J.; Zaelke, R. L.; Balkey, J. J.

    2005-01-01

    As a matter of good business practices, a team of glovebox experts from Los Alamos National Laboratory (LANL) has been assembled to proactively investigate processes and procedures that minimize unplanned breaches in the glovebox, e.g., glove failures. A major part of this effort involves the review of glovebox glove failures that have occurred at the Plutonium Facility and at the Chemical and Metallurgy Research Facility. Information dating back to 1993 has been compiled from formal records. This data has been combined with information obtained from a baseline inventory of about 9,000 glovebox gloves. The key attributes tracked include those related to location, the glovebox glove, type and location of breaches, the worker, and the consequences resulting from breaches. This glovebox glove failure analysis yielded results in the areas of the ease of collecting this type of data, the causes of most glove failures that have occurred, the effectiveness of current controls, and recommendations to improve hazard control systems. As expected, a significant number of breaches involve high-risk operations such as grinding, hammering, using sharps (especially screwdrivers), and assembling equipment. Surprisingly, tasks such as the movement of equipment and material between gloveboxes and the opening of cans are also major contributions of breaches. Almost half the gloves fail within a year of their install date. The greatest consequence for over 90% of glovebox glove failures is alpha contamination of protective clothing. Personnel self-monitoring at the gloveboxes continues to be the most effective way of detecting glovebox glove failures. Glove failures from these tasks can be reduced through changes in procedures and the design of remote-handling apparatus. The Nuclear Materials Technology Division management uses this information to improve hazard control systems to reduce the number of unplanned breaches in the glovebox further. As a result, excursions of contaminants

  12. Ontario Universities Benefits Survey, 1991-92. Part I: Benefits Excluding Pensions [and] Part II: Pensions.

    ERIC Educational Resources Information Center

    Council of Senior Administrative Officers--Universities of Ontario, Toronto.

    This report, which combined Part I and Part II of a benefit study, presents data from a survey of Ontario universities concerning fringe benefits offered in 1991-92. Part I is made up of a series of tables displaying the information on particular benefits institution-by-institution. The first five tables cover general aspects of benefits,…

  13. EDUCATION AND THE DEVELOPMENT OF IN-RESIDENCE TRAINING PROGRAMS, PART I, PART II.

    ERIC Educational Resources Information Center

    MELICAN, ROBERT L.; PURCELL, FRANCIS P.

    THE TWO PARTS OF THIS DISCUSSION CONSIDER THE DEVELOPMENT OF RESIDENTIAL PROGRAMS FOR VOCATIONAL AND SOCIAL TRAINING TO MEET THE PROBLEMS OF THE LOW-INCOME SCHOOL DROPOUT. PART I REVIEWS THE HISTORICAL BACKGROUND OF RESIDENCY PROGRAMS IN SUCH EDUCATIONAL INSTITUTIONS AS COLLEGES, UNIVERSITIES, CHURCHES, AND SUMMER CAMPS. PART II DEALS WITH THE…

  14. AT2 DS II - Accelerator System Design (Part II) - CCC Video Conference

    SciTech Connect

    2010-12-17

    Discussion Session - Accelerator System Design (Part II) Tutors: C. Darve, J. Weisend II, Ph. Lebrun, A. Dabrowski, U. Raich Video Conference with the CERN Control Center. Experts in the field of Accelerator science will be available to answer the students questions. This session will link the CCC and SA (using Codec VC).

  15. AT2 DS II - Accelerator System Design (Part II) - CCC Video Conference

    ScienceCinema

    None

    2016-07-12

    Discussion Session - Accelerator System Design (Part II) Tutors: C. Darve, J. Weisend II, Ph. Lebrun, A. Dabrowski, U. Raich Video Conference with the CERN Control Center. Experts in the field of Accelerator science will be available to answer the students questions. This session will link the CCC and SA (using Codec VC).

  16. A Conversation with William A. Fowler Part II

    NASA Astrophysics Data System (ADS)

    Greenberg, John

    2005-06-01

    Physicist William A.Fowler initiated an experimental program in nuclear astrophysics after World War II. He recalls here the Steady State versus Big Bang controversy and his celebrated collaboration with Fred Hoyle and Geoffrey and Margaret Burbidge on nucleosynthesis in stars. He also comments on the shift away from nuclear physics in universities to large accelerators and national laboratories.

  17. Recent Economic Perspectives on Political Economy, Part II*

    PubMed Central

    Dewan, Torun; Shepsle, Kenneth A.

    2013-01-01

    In recent years some of the best theoretical work on the political economy of political institutions and processes has begun surfacing outside the political science mainstream in high quality economics journals. This two-part paper surveys these contributions from a recent five-year period. In Part I, the focus is on elections, voting and information aggregation, followed by treatments of parties, candidates, and coalitions. In Part II, papers on economic performance and redistribution, constitutional design, and incentives, institutions, and the quality of political elites are discussed. Part II concludes with a discussion of the methodological bases common to economics and political science, the way economists have used political science research, and some new themes and arbitrage opportunities. PMID:23606754

  18. High Performance Liquid Chromatography/Video Fluorometry. Part II. Applications.

    DTIC Science & Technology

    1981-09-30

    HIGH PERFORMANCE LIQUID CHROMATOGRAPHY /VIDEO FLUOROMETRY. PART...REP«T_N&:-ŗ/ High Performance Liquid Chromatography /Video Fluorometry» Part II. Applications« by | Dennis C./Shelly* Michael P./Vogarty and...Data EnlirtdJ REPORT DOCUMENTATION PAGE t. REPORT NUMBER 2 GOVT ACCESSION NO 4. T1TI.F (and Submit) lP-^fffsyva High Performance Liquid Chromatography

  19. Ethical Research Practices: Collaborative Action Research, Part II

    ERIC Educational Resources Information Center

    Calvin, Chris

    2004-01-01

    This is part II of a case study involving a large federally funded technology grant program implemented across several central Texas school districts and was followed by the researcher-participant at the university level as well as one of the campus sites. Many ethical research questions were raised during this study such as the use of participant…

  20. The Nature of Reinforcement: Part I. (Volume I), Part II. (Volume II).

    ERIC Educational Resources Information Center

    Glaser, Robert, Ed.

    Part One of this report describes the first half of a conference, designed to examine the nature of reinforcement, which was held at the University of Pittsburgh in June 1969. The topics discussed include: "Reward in Human Learning: Theoretical Issues and Strategic Choice Points"; "Are Reinforcement Concepts Able to Provide Reinforcement for…

  1. 40 CFR Appendix II to Part 257 - Appendix II to Part 257

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... to Part 257 A. Processes To Significantly Reduce Pathogens Aerobic digestion: The process is... of which temperatures average on a daily basis above 0 °C. Anaerobic digestion: The process is...: Liquid sludge is heated to temperatures of 180 °C for 30 minutes. Thermophilic Aerobic Digestion:...

  2. 40 CFR Appendix II to Part 257 - Appendix II to Part 257

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... to Part 257 A. Processes To Significantly Reduce Pathogens Aerobic digestion: The process is... of which temperatures average on a daily basis above 0 °C. Anaerobic digestion: The process is...: Liquid sludge is heated to temperatures of 180 °C for 30 minutes. Thermophilic Aerobic Digestion:...

  3. 40 CFR Appendix II to Part 257 - Appendix II to Part 257

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... to Part 257 A. Processes To Significantly Reduce Pathogens Aerobic digestion: The process is... of which temperatures average on a daily basis above 0 °C. Anaerobic digestion: The process is...: Liquid sludge is heated to temperatures of 180 °C for 30 minutes. Thermophilic Aerobic Digestion:...

  4. 40 CFR Appendix II to Part 257 - Appendix II to Part 257

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... to Part 257 A. Processes To Significantly Reduce Pathogens Aerobic digestion: The process is... of which temperatures average on a daily basis above 0 °C. Anaerobic digestion: The process is...: Liquid sludge is heated to temperatures of 180 °C for 30 minutes. Thermophilic Aerobic Digestion:...

  5. 40 CFR Appendix II to Part 257 - Appendix II to Part 257

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... to Part 257 A. Processes To Significantly Reduce Pathogens Aerobic digestion: The process is... of which temperatures average on a daily basis above 0 °C. Anaerobic digestion: The process is...: Liquid sludge is heated to temperatures of 180 °C for 30 minutes. Thermophilic Aerobic Digestion:...

  6. Recent advances in small bowel diseases: Part II

    PubMed Central

    Thomson, Alan BR; Chopra, Angeli; Clandinin, Michael Tom; Freeman, Hugh

    2012-01-01

    As is the case in all areas of gastroenterology and hepatology, in 2009 and 2010 there were many advances in our knowledge and understanding of small intestinal diseases. Over 1000 publications were reviewed, and the important advances in basic science as well as clinical applications were considered. In Part II we review six topics: absorption, short bowel syndrome, smooth muscle function and intestinal motility, tumors, diagnostic imaging, and cystic fibrosis. PMID:22807605

  7. Probabilistic finite-state machines--part II.

    PubMed

    Vidal, Enrique; Thollard, Frank; de la Higuera, Colin; Casacuberta, Francisco; Carrasco, Rafael C

    2005-07-01

    Probabilistic finite-state machines are used today in a variety of areas in pattern recognition or in fields to which pattern recognition is linked. In Part I of this paper, we surveyed these objects and studied their properties. In this Part II, we study the relations between probabilistic finite-state automata and other well-known devices that generate strings like hidden Markov models and n-grams and provide theorems, algorithms, and properties that represent a current state of the art of these objects.

  8. The Value of Imaging Part II: Value beyond Image Interpretation.

    PubMed

    Duong, Phuong-Anh T; Pastel, David A; Sadigh, Gelareh; Ballard, David; Sullivan, Joseph C; Bresnahan, Brian; Buch, Karen; Duszak, Richard

    2016-01-01

    Although image interpretation is an essential part of radiologists' value, there are other ways in which we contribute to patient care. Part II of the value of imaging series reviews current initiatives that demonstrate value beyond the image interpretation. Standardizing processes, reducing the radiation dose of our examinations, clarifying written reports, improving communications with patients and providers, and promoting appropriate imaging through decision support are all ways we can provide safer, more consistent, and higher quality care. As payers and policy makers push to drive value, research that demonstrates the value of these endeavors, or lack thereof, will become increasingly sought after and supported.

  9. Experimental Stark Shift of Some Xe II UV Lines

    SciTech Connect

    Djurovic, S.; Cirisan, M.; Pelaez, R. J.; Aparicio, J. A.; Mar, S.

    2008-10-22

    Stark broadening and shift of Xe II lines have been the subject of many experimental and theoretical studie. Here, the results of Stark shift measurements for six Xe II lines are presented. All given results are here reported for the first time. Two lines belong to 5d-6p, two to 5d-7p and one to 5d-4f transition. In this experiment pulsed arc plasma made of mixture of 95% helium and 5% xenon was used. Measured electron densities and temperatures were in the range of (0.2-1.8)10{sup 23}m{sup -3} and 18300-25500 K respectively.

  10. Polycystic ovary syndrome: a review for dermatologists: Part II. Treatment.

    PubMed

    Buzney, Elizabeth; Sheu, Johanna; Buzney, Catherine; Reynolds, Rachel V

    2014-11-01

    Dermatologists are in a key position to treat the manifestations of polycystic ovary syndrome (PCOS). The management of PCOS should be tailored to each woman's specific goals, reproductive interests, and particular constellation of symptoms. Therefore, a multidisciplinary approach is recommended. In part II of this continuing medical education article, we present the available safety and efficacy data regarding treatments for women with acne, hirsutism, and androgenetic alopecia. Therapies discussed include lifestyle modification, topical therapies, combined oral contraceptives, antiandrogen agents, and insulin-sensitizing drugs. Treatment recommendations are made based on the current available evidence.

  11. Wideband, low-frequency springless vibration energy harvesters: part II

    NASA Astrophysics Data System (ADS)

    Bendame, Mohamed; Abdel-Rahman, Eihab; Soliman, Mostafa

    2016-11-01

    This paper concludes a two-part investigation of a novel architecture for vibration energy harvesting (VEH), the springless VEH. In this part, we study vertical springless electromagnetic VEHs where the direction of motion is aligned with the gravitational field. Experimental results show the existence of three topologies in the response of vertical springless VEHs; linear, single-impact, and double-impact. A model, encompassing all three topologies, was developed and validated by comparison to experimental results. We found that vertical springless VEHs demonstrate low frequency harvesting (<20 Hz), widebeand harvesting (bandwidths up to \\text{BW}=11.2 Hz), and an optimal output power of P  =  7.52 mW at a base acceleration of 0.6 g. While horizontal springless VEHs typically offer more output power, the single-impact regime of the vertical springless VEHs offers the simultaneous advantages of wider harvesting bandwidths at lower operating frequencies.

  12. The "Pseudocommando" mass murderer: part II, the language of revenge.

    PubMed

    Knoll, James L

    2010-01-01

    In Part I of this article, research on pseudocommandos was reviewed, and the important role that revenge fantasies play in motivating such persons to commit mass murder-suicide was discussed. Before carrying out their mass shootings, pseudocommandos may communicate some final message to the public or news media. These communications are rich sources of data about their motives and psychopathology. In Part II of this article, forensic psycholinguistic analysis is applied to clarify the primary motivations, detect the presence of mental illness, and discern important individual differences in the final communications of two recent pseudocommandos: Seung-Hui Cho (Virginia Tech) and Jiverly Wong (Binghamton, NY). Although both men committed offenses that qualify them as pseudocommandos, their final communications reveal striking differences in their psychopathology.

  13. Structure Learning and Statistical Estimation in Distribution Networks - Part II

    SciTech Connect

    Deka, Deepjyoti; Backhaus, Scott N.; Chertkov, Michael

    2015-02-13

    Limited placement of real-time monitoring devices in the distribution grid, recent trends notwithstanding, has prevented the easy implementation of demand-response and other smart grid applications. Part I of this paper discusses the problem of learning the operational structure of the grid from nodal voltage measurements. In this work (Part II), the learning of the operational radial structure is coupled with the problem of estimating nodal consumption statistics and inferring the line parameters in the grid. Based on a Linear-Coupled(LC) approximation of AC power flows equations, polynomial time algorithms are designed to identify the structure and estimate nodal load characteristics and/or line parameters in the grid using the available nodal voltage measurements. Then the structure learning algorithm is extended to cases with missing data, where available observations are limited to a fraction of the grid nodes. The efficacy of the presented algorithms are demonstrated through simulations on several distribution test cases.

  14. PREREM: an interactive data preprocessing code for INREM II. Part I: user's manual. Part II: code structure

    SciTech Connect

    Ryan, M.T.; Fields, D.E.

    1981-05-01

    PREREM is an interactive computer code developed as a data preprocessor for the INREM-II (Killough, Dunning, and Pleasant, 1978a) internal dose program. PREREM is intended to provide easy access to current and self-consistent nuclear decay and radionuclide-specific metabolic data sets. Provision is made for revision of metabolic data, and the code is intended for both production and research applications. Documentation for the code is in two parts. Part I is a user's manual which emphasizes interpretation of program prompts and choice of user input. Part II stresses internal structure and flow of program control and is intended to assist the researcher who wishes to revise or modify the code or add to its capabilities. PREREM is written for execution on a Digital Equipment Corporation PDP-10 System and much of the code will require revision before it can be run on other machines. The source program length is 950 lines (116 blocks) and computer core required for execution is 212 K bytes. The user must also have sufficient file space for metabolic and S-factor data sets. Further, 64 100 K byte blocks of computer storage space are required for the nuclear decay data file. Computer storage space must also be available for any output files produced during the PREREM execution. 9 refs., 8 tabs.

  15. Blade System Design Study. Part II, final project report (GEC).

    SciTech Connect

    Griffin, Dayton A.

    2009-05-01

    As part of the U.S. Department of Energy's Low Wind Speed Turbine program, Global Energy Concepts LLC (GEC)1 has studied alternative composite materials for wind turbine blades in the multi-megawatt size range. This work in one of the Blade System Design Studies (BSDS) funded through Sandia National Laboratories. The BSDS program was conducted in two phases. In the Part I BSDS, GEC assessed candidate innovations in composite materials, manufacturing processes, and structural configurations. GEC also made recommendations for testing composite coupons, details, assemblies, and blade substructures to be carried out in the Part II study (BSDS-II). The BSDS-II contract period began in May 2003, and testing was initiated in June 2004. The current report summarizes the results from the BSDS-II test program. Composite materials evaluated include carbon fiber in both pre-impregnated and vacuum-assisted resin transfer molding (VARTM) forms. Initial thin-coupon static testing included a wide range of parameters, including variation in manufacturer, fiber tow size, fabric architecture, and resin type. A smaller set of these materials and process types was also evaluated in thin-coupon fatigue testing, and in ply-drop and ply-transition panels. The majority of materials used epoxy resin, with vinyl ester (VE) resin also used for selected cases. Late in the project, testing of unidirectional fiberglass was added to provide an updated baseline against which to evaluate the carbon material performance. Numerous unidirectional carbon fabrics were considered for evaluation with VARTM infusion. All but one fabric style considered suffered either from poor infusibility or waviness of fibers combined with poor compaction. The exception was a triaxial carbon-fiberglass fabric produced by SAERTEX. This fabric became the primary choice for infused articles throughout the test program. The generally positive results obtained in this program for the SAERTEX material have led to its being

  16. A Survey of Optometry Graduates to Determine Practice Patterns: Part II: Licensure and Practice Establishment Experiences.

    ERIC Educational Resources Information Center

    Bleimann, Robert L.; Smith, Lee W.

    1985-01-01

    A summary of Part II of a two-volume study of optometry graduates conducted by the Association of Schools and Colleges of Optometry is presented. Part II includes the analysis of the graduates' licensure and practice establishment experiences. (MLW)

  17. 40 CFR Appendix II to Part 1054 - Duty Cycles for Laboratory Testing

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 34 2012-07-01 2012-07-01 false Duty Cycles for Laboratory Testing II Appendix II to Part 1054 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR.... 1054, App. II Appendix II to Part 1054—Duty Cycles for Laboratory Testing (a) Test handheld...

  18. 40 CFR Appendix II to Part 1054 - Duty Cycles for Laboratory Testing

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 33 2014-07-01 2014-07-01 false Duty Cycles for Laboratory Testing II Appendix II to Part 1054 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR.... 1054, App. II Appendix II to Part 1054—Duty Cycles for Laboratory Testing (a) Test handheld...

  19. 40 CFR Appendix II to Part 1054 - Duty Cycles for Laboratory Testing

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 34 2013-07-01 2013-07-01 false Duty Cycles for Laboratory Testing II Appendix II to Part 1054 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR.... 1054, App. II Appendix II to Part 1054—Duty Cycles for Laboratory Testing (a) Test handheld...

  20. 40 CFR Appendix II to Part 1054 - Duty Cycles for Laboratory Testing

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 33 2011-07-01 2011-07-01 false Duty Cycles for Laboratory Testing II Appendix II to Part 1054 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR.... 1054, App. II Appendix II to Part 1054—Duty Cycles for Laboratory Testing (a) Test handheld...

  1. 40 CFR Appendix II to Part 1054 - Duty Cycles for Laboratory Testing

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Duty Cycles for Laboratory Testing II Appendix II to Part 1054 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR.... 1054, App. II Appendix II to Part 1054—Duty Cycles for Laboratory Testing (a) Test handheld...

  2. 40 CFR Appendix II to Part 1048 - Large Spark-ignition (SI) Composite Transient Cycle

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 34 2013-07-01 2013-07-01 false Large Spark-ignition (SI) Composite Transient Cycle II Appendix II to Part 1048 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY.... 1048, App. II Appendix II to Part 1048—Large Spark-ignition (SI) Composite Transient Cycle...

  3. 10 CFR Appendix II to Part 960 - NRC and EPA Requirements for Preclosure Repository Performance

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 4 2011-01-01 2011-01-01 false NRC and EPA Requirements for Preclosure Repository Performance II Appendix II to Part 960 Energy DEPARTMENT OF ENERGY GENERAL GUIDELINES FOR THE PRELIMINARY SCREENING OF POTENTIAL SITES FOR A NUCLEAR WASTE REPOSITORY Pt. 960, App. II Appendix II to Part 960—NRC...

  4. 10 CFR Appendix II to Part 960 - NRC and EPA Requirements for Preclosure Repository Performance

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 4 2014-01-01 2014-01-01 false NRC and EPA Requirements for Preclosure Repository Performance II Appendix II to Part 960 Energy DEPARTMENT OF ENERGY GENERAL GUIDELINES FOR THE PRELIMINARY SCREENING OF POTENTIAL SITES FOR A NUCLEAR WASTE REPOSITORY Pt. 960, App. II Appendix II to Part 960—NRC...

  5. 10 CFR Appendix II to Part 960 - NRC and EPA Requirements for Preclosure Repository Performance

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 4 2012-01-01 2012-01-01 false NRC and EPA Requirements for Preclosure Repository Performance II Appendix II to Part 960 Energy DEPARTMENT OF ENERGY GENERAL GUIDELINES FOR THE PRELIMINARY SCREENING OF POTENTIAL SITES FOR A NUCLEAR WASTE REPOSITORY Pt. 960, App. II Appendix II to Part 960—NRC...

  6. 10 CFR Appendix II to Part 960 - NRC and EPA Requirements for Preclosure Repository Performance

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false NRC and EPA Requirements for Preclosure Repository Performance II Appendix II to Part 960 Energy DEPARTMENT OF ENERGY GENERAL GUIDELINES FOR THE PRELIMINARY SCREENING OF POTENTIAL SITES FOR A NUCLEAR WASTE REPOSITORY Pt. 960, App. II Appendix II to Part 960—NRC...

  7. 10 CFR Appendix II to Part 960 - NRC and EPA Requirements for Preclosure Repository Performance

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 4 2013-01-01 2013-01-01 false NRC and EPA Requirements for Preclosure Repository Performance II Appendix II to Part 960 Energy DEPARTMENT OF ENERGY GENERAL GUIDELINES FOR THE PRELIMINARY SCREENING OF POTENTIAL SITES FOR A NUCLEAR WASTE REPOSITORY Pt. 960, App. II Appendix II to Part 960—NRC...

  8. 31 CFR Appendix II(f) to Part 13 - Overhead and Administrative Costs

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Overhead and Administrative Costs II(F) Appendix II(F) to Part 13 Money and Finance: Treasury Office of the Secretary of the Treasury... Pt. 13, App. II(F) Appendix II(F) to Part 13—Overhead and Administrative Costs Date: Select Only...

  9. 31 CFR Appendix II(f) to Part 13 - Overhead and Administrative Costs

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 31 Money and Finance: Treasury 1 2011-07-01 2011-07-01 false Overhead and Administrative Costs II(F) Appendix II(F) to Part 13 Money and Finance: Treasury Office of the Secretary of the Treasury... Pt. 13, App. II(F) Appendix II(F) to Part 13—Overhead and Administrative Costs Date: Select Only...

  10. Mammalian Toxicity of Munitions Compounds. Phase II. Effects of Multiple Doses Part II. 2,4-Dinitrotoluene

    DTIC Science & Technology

    1978-11-01

    II: Effects of Multiple Doses Part !I: 2,4-T)initrotoiuene I Progres Report No. 3 oNovember 1978 by 3I Cheng-Chun Lee U Hirty V. Ellis, III Jo.,n J...Sciences Division November 1978 vii :. •I~~~~AMMALIAN TOXICITY OF MUNITIONS COMPOUNDS ... ... PHASE IIz Effects of Multiple Doses m . ............... PART...161 xi MAMOMALIAN TOXICITY OF MUNITION COMPOUNDS PHASE II: Effects of Multiple Dones PART II: 2,4

  11. Decommissioning of Experimental Breeder Reactor - II Complex, Post Sodium Draining

    SciTech Connect

    J. A. Michelbacher; S. Paul Henslee; Collin J. Knight; Steven R. sherman

    2005-09-01

    The Experimental Breeder Reactor - II (EBR-II) was shutdown in September 1994 as mandated by the United States Department of Energy. This sodium-cooled reactor had been in service since 1964. The bulk sodium was drained from the primary and secondary systems and processed. Residual sodium remaining in the systems after draining was converted into sodium bicarbonate using humid carbon dioxide. This technique was tested at Argonne National Laboratory in Illinois under controlled conditions, then demonstrated on a larger scale by treating residual sodium within the EBR-II secondary cooling system, followed by the primary tank. This process, terminated in 2002, was used to place a layer of sodium bicarbonate over all exposed surfaces of sodium. Treatment of the remaining EBR-II sodium is governed by the Resource Conservation and Recovery Act (RCRA). The Idaho Department of Environmental Quality issued a RCRA Operating Permit in 2002, mandating that all hazardous materials be removed from EBR-II within a 10 year period, with the ability to extend the permit and treatment period for another 10 years. A preliminary plan has been formulated to remove the remaining sodium and NaK from the primary and secondary systems using moist carbon dioxide, steam and nitrogen, and a water flush. The moist carbon dioxide treatment was resumed in May 2004. As of August 2005, approximately 60% of the residual sodium within the EBR-II primary tank had been treated. This process will continue through the end of 2005, when it is forecast that the process will become increasingly ineffective. At that time, subsequent treatment processes will be planned and initiated. It should be noted that the processes and anticipated costs associated with these processes are preliminary. Detailed engineering has not been performed, and approval for these methods has not been obtained from the regulator or the sponsors.

  12. 77 FR 60743 - Proposed Collection; Comment Request for Schedule F, Part II and III (Form 1040)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-04

    ... Internal Revenue Service Proposed Collection; Comment Request for Schedule F, Part II and III (Form 1040... Law 104-13 (44 U.S.C. 3506(c)(2)(A)). Currently, the IRS is soliciting comments concerning Schedule F... Number: Schedule F, Part II and III (Form 1040). Abstract: Schedule F, Part II and III (Form 1040)...

  13. Kinetic modeling of light limitation and sulfur deprivation effects in the induction of hydrogen production with Chlamydomonas reinhardtii. Part II: Definition of model-based protocols and experimental validation.

    PubMed

    Degrenne, B; Pruvost, J; Titica, M; Takache, H; Legrand, J

    2011-10-01

    Photosynthetic hydrogen production under light by the green microalga Chlamydomonas reinhardtii was investigated in a torus-shaped PBR in sulfur-deprived conditions. Culture conditions, represented by the dry biomass concentration of the inoculum, sulfate concentration, and incident photon flux density (PFD), were optimized based on a previously published model (Fouchard et al., 2009. Biotechnol Bioeng 102:232-245). This allowed a strictly autotrophic production, whereas the sulfur-deprived protocol is usually applied in photoheterotrophic conditions. Experimental results combined with additional information from kinetic simulations emphasize effects of sulfur deprivation and light attenuation in the PBR in inducing anoxia and hydrogen production. A broad range of PFD was tested (up to 500 µmol photons m(-2) s(-1) ). Maximum hydrogen productivities were 1.0 ± 0.2 mL H₂ /h/L (or 25 ± 5 mL H₂ /m(2) h) and 3.1 mL ± 0.4 H₂ /h L (or 77.5 ± 10 mL H₂ /m(2) h), at 110 and 500 µmol photons m(-2) s(-1) , respectively. These values approached a maximum specific productivity of approximately 1.9 mL ± 0.4 H₂ /h/g of biomass dry weight, clearly indicative of a limitation in cell capacity to produce hydrogen. The efficiency of the process and further optimizations are discussed.

  14. 49 CFR Appendix A-Ii to Part 541 - Lines With Antitheft Devices Which Are Exempted in-Part From the Parts-Marking Requirements of...

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 6 2011-10-01 2011-10-01 false Lines With Antitheft Devices Which Are Exempted in-Part From the Parts-Marking Requirements of This Standard Pursuant to 49 CFR Part 543 A Appendix A-II... STANDARD Pt. 541, App. A-II Appendix A-II to Part 541—Lines With Antitheft Devices Which Are Exempted...

  15. 49 CFR Appendix A-Ii to Part 541 - Lines With Antitheft Devices Which Are Exempted in-Part From the Parts-Marking Requirements of...

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 6 2010-10-01 2010-10-01 false Lines With Antitheft Devices Which Are Exempted in-Part From the Parts-Marking Requirements of This Standard Pursuant to 49 CFR Part 543 A Appendix A-II... STANDARD Pt. 541, App. A-II Appendix A-II to Part 541—Lines With Antitheft Devices Which Are Exempted...

  16. Antiviral medication in sexually transmitted diseases. Part II: HIV.

    PubMed

    Majewska, Anna; Mlynarczyk-Bonikowska, Beata; Malejczyk, Magdalena; Mlynarczyk, Grazyna; Majewski, Slawomir

    2015-01-01

    This is a second part of a review under a main title Antiviral medication in sexually transmitted diseases. In the part we published in Mini Rev Med Chem. 2013,13(13):1837-45, we have described mechanisms of action and mechanism of resistance to antiviral agents used in genital herpes and genital HPV infection. The Part II review focuses on therapeutic options in HIV infection. In 1987, 6 years after the recognition of AIDS, the FDA approved the first drug against HIV--zidovudine. Since then a lot of antiretroviral drugs are available. The most effective treatment for HIV is highly active antiretroviral therapy--a combination of several antiretroviral medicines that cause a reduction of HIV blood concentration and often results in substantial recovery of impaired immunologic function. At present, there are over 20 drugs licensed and used for the treatment of HIV/AIDS, and these drugs are divided into one of six classes. Investigational agents include GS-7340, the prodrug of tenofovir and BMS-663068--the first in a novel class of drugs that blocks the binding of the HIV gp120 to the CD4 receptor.

  17. Experimental Stark widths and shifts of Ti II spectral lines

    NASA Astrophysics Data System (ADS)

    Manrique, J.; Aguilera, J. A.; Aragón, C.

    2016-10-01

    Stark widths and shifts of Ti II lines with wavelengths in the range 2500-4600 Å have been determined by laser-induced breakdown spectroscopy. The temperature and electron density of the plasma vary in the ranges 11 970-15 520 K and (2.0-7.2) × 1017 cm-3, respectively, for the different measurement instants from 0.6 to 1.8 μs. The samples used are fused glass discs with different titanium concentrations, selected to control the self-absorption of the lines. The Stark widths and shifts are compared with the experimental and theoretical data available in the literature.

  18. Current status of experimental breeder reactor-II [EBR-II] shutdown planning

    SciTech Connect

    McDermott, M. D.; Griffin, C. D.; Michelbacher, J. A.; Earle, O. K.

    2000-05-08

    The Experimental Breeder Reactor--II (EBR-II) at Argonne National Laboratory--West (ANL-W) in Idaho, was shutdown in September, 1994 as mandated by the US Department of Energy. This sodium cooled reactor had been in service since 1964, and was to be placed in an industrially and radiologically safe condition for ultimate decommissioning. The deactivation of a liquid metal reactor presents unique concerns. The first major task associated with the project was the removal of all fueled assemblies. In addition, sodium must be drained from systems and processed for ultimate disposal. Residual quantities of sodium remaining in systems must be deactivated or inerted to preclude future hazards associated with pyrophoricity and generation of potentially explosive hydrogen gas. A Sodium Process Facility was designed and constructed to react the elemental sodium from the EBR-II primary and secondary systems to sodium hydroxide for disposal. This facility has a design capacity to allow the reaction of the complete inventory of sodium at ANL-W in less than two years. Additional quantities of sodium from the Fermi-1 reactor are also being treated at the Sodium Process Facility. The sodium environment and the EBR-II configuration, combined with the radiation and contamination associated with thirty years of reactor operation, posed problems specific to liquid metal reactor deactivation. The methods being developed and implemented at EBR-II can be applied to other similar situations in the US and abroad.

  19. Primer of statistics in dental research: Part II.

    PubMed

    Shintani, Ayumi

    2014-04-01

    The Part I of Primer of Statistics in Dental Research covered five topics that are often mentioned in statistical check list of many peer-review journals including (1) statistical graph, (2) how to deal with outliers, (3) p-value and confidence interval, (4) testing equivalence, and (5) multiplicity Adjustment. The Part II of the series covers another set of important topics in dental statistics including (1) selecting the proper statistical tests, (2) repeated measures analysis, (3) epidemiological consideration for causal association, and (4) analysis of agreement. First, a guide in selecting the proper statistical tests based on the research question will be laid out in text and with a table so that researchers choose the univariable statistical test by answering five simple questions. Second, the importance of utilizing repeated measures analysis will be illustrated. This is a key component of data analysis as in many dental studies, observations are considered repeated in a single patient (several teeth are measured in a single patient). Third, concepts of confounding and the use of regression analysis are explained by going over a famous observational cohort study. Lastly, the use of proper agreement analysis vs. correlation for study of agreement will be discussed to avoid a common pitfall in dental research.

  20. Reforming Science Education: Part II. Utilizing Kieran Egan's Educational Metatheory

    NASA Astrophysics Data System (ADS)

    Schulz, Roland M.

    2009-04-01

    This paper is the second of two parts and continues the conversation which had called for a shift in the conceptual focus of science education towards philosophy of education, with the requirement to develop a discipline-specific “philosophy” of science education. In Part I, conflicting conceptions of science literacy were identified with disparate “visions” tied to competing research programs as well as school-based curricular paradigms. The impasse in the goals of science education and thereto, the contending views of science literacy, were themselves associated with three underlying fundamental aims of education (knowledge-itself; personal development; socialization) which, it was argued, usually undercut the potential of each other. During periods of “crisis-talk” and throughout science educational history these three aims have repeatedly attempted to assert themselves. The inability of science education research to affect long-term change in classrooms was correlated not only to the failure to reach a consensus on the aims (due to competing programs and to the educational ideologies of their social groups), but especially to the failure of developing true educational theories (largely neglected since Hirst). Such theories, especially metatheories, could serve to reinforce science education’s growing sense of academic autonomy and independence from socio-economic demands. In Part II, I offer as a suggestion Egan’s cultural-linguistic theory as a metatheory to help resolve the impasse. I hope to make reformers familiar with his important ideas in general, and more specifically, to show how they can complement HPS rationales and reinforce the work of those researchers who have emphasized the value of narrative in learning science.

  1. 40 CFR Appendix II to Part 1039 - Steady-State Duty Cycles

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... II to Part 1039 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW AND IN-USE NONROAD COMPRESSION-IGNITION ENGINES Pt. 1039, App. II Appendix II to Part 1039—Steady-State Duty Cycles (a) The following duty cycles apply for...

  2. 40 CFR Appendix II to Part 600 - Sample Fuel Economy Calculations

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 31 2012-07-01 2012-07-01 false Sample Fuel Economy Calculations II Appendix II to Part 600 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) ENERGY POLICY FUEL ECONOMY AND GREENHOUSE GAS EXHAUST EMISSIONS OF MOTOR VEHICLES Pt. 600, App. II Appendix II...

  3. 40 CFR Appendix II to Part 600 - Sample Fuel Economy Calculations

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 30 2014-07-01 2014-07-01 false Sample Fuel Economy Calculations II Appendix II to Part 600 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) ENERGY POLICY FUEL ECONOMY AND GREENHOUSE GAS EXHAUST EMISSIONS OF MOTOR VEHICLES Pt. 600, App. II Appendix II...

  4. Overview of the Pegasus-II experimental program

    SciTech Connect

    Shlachter, J.S.; Adams, P.J.; Atchison, W.L.

    1998-12-31

    Pegasus-II is a pulsed power facility at Los Alamos National Laboratory which is used to conduct a variety of experiments in the high energy density regime, with applications to the physics of nuclear weapons as well as basic science. The chief mission of the facility is the systematic investigation of hydrodynamic physics issues through the use of a magnetically-driven, cylindrical imploding liner. At 4.3-MJ of stored energy, Pegasus-II is one of the largest capacitor-bank facilities in the world. Peak currents as high as 12 MA have been produced with a quarter-cycle time of 6--8 {micro}s. The active portion of the standardized aluminum liner is a 3.2-g right hollow cylinder designed such that the inner surface of the liner remains at solid aluminum density during the course of the experiment. The run-in time for a typical experiment is {approximately}10 {micro}s. For some experiments, a diagnostic package is placed inside the liner to analyze physical processes associated with multi-microsecond convergent implosions of macroscopic solid shells. These campaigns include the study of instability growth rates, hydrodynamic bounce and mix, and mechanical heating associated with high strain and strain rate. Other experimental studies, in particular those examining the shock /production of ejecta and shock-driven hydrodynamic vortex formation and compression, have involved the use of an internal target package. By varying the Pegasus-II operating conditions, the impact of the liner on an internal target of a few cm diameter results in shock pressures of 100kBar--1MBar with liner velocities of 3 mm/{micro}s--10 mm/{micro}s. Some experiments have been conducted in the regime where strength of materials affects the hydrodynamical behavior of the system, while for other target designs, efforts have been made to minimize the role of material strength. Hydrodynamic experiments on Pegasus-II uniquely combine convergent geometry with axial diagnostic access of macroscopic

  5. Recovery in soccer : part ii-recovery strategies.

    PubMed

    Nédélec, Mathieu; McCall, Alan; Carling, Chris; Legall, Franck; Berthoin, Serge; Dupont, Gregory

    2013-01-01

    In the formerly published part I of this two-part review, we examined fatigue after soccer matchplay and recovery kinetics of physical performance, and cognitive, subjective and biological markers. To reduce the magnitude of fatigue and to accelerate the time to fully recover after completion, several recovery strategies are now used in professional soccer teams. During congested fixture schedules, recovery strategies are highly required to alleviate post-match fatigue, and then to regain performance faster and reduce the risk of injury. Fatigue following competition is multifactorial and mainly related to dehydration, glycogen depletion, muscle damage and mental fatigue. Recovery strategies should consequently be targeted against the major causes of fatigue. Strategies reviewed in part II of this article were nutritional intake, cold water immersion, sleeping, active recovery, stretching, compression garments, massage and electrical stimulation. Some strategies such as hydration, diet and sleep are effective in their ability to counteract the fatigue mechanisms. Providing milk drinks to players at the end of competition and a meal containing high-glycaemic index carbohydrate and protein within the hour following the match are effective in replenishing substrate stores and optimizing muscle-damage repair. Sleep is an essential part of recovery management. Sleep disturbance after a match is common and can negatively impact on the recovery process. Cold water immersion is effective during acute periods of match congestion in order to regain performance levels faster and repress the acute inflammatory process. Scientific evidence for other strategies reviewed in their ability to accelerate the return to the initial level of performance is still lacking. These include active recovery, stretching, compression garments, massage and electrical stimulation. While this does not mean that these strategies do not aid the recovery process, the protocols implemented up until

  6. Shutdown and Closure of the Experimental Breeder Reactor - II

    SciTech Connect

    Michelbacher, John A.; Baily, Carl E.; Baird, Daniel K.; Henslee, S. Paul; Knight, Collin J.; Rosenberg, Kenneth E.

    2002-07-01

    The Department of Energy mandated the termination of the Integral Fast Reactor (IFR) Program, effective October 1, 1994. To comply with this decision, Argonne National Laboratory-West (ANL-W) prepared a plan providing detailed requirements to maintain the Experimental Breeder Reactor - II (EBR-II) in a radiologically and industrially safe condition, including removal of all irradiated fuel assemblies from the reactor plant, and removal and stabilization of the primary and secondary sodium, a liquid metal used to transfer heat within the reactor plant. The EBR-II is a pool-type reactor. The primary system contained approximately 325 m{sup 3} (86,000 gallons) of sodium and the secondary system contained 50 m{sup 3} (13,000 gallons). In order to properly dispose of the sodium in compliance with the Resource Conservation and Recovery Act (RCRA), a facility was built to react the sodium to a solid sodium hydroxide monolith for burial as a low level waste in a land disposal facility. Deactivation of a liquid metal fast breeder reactor (LMFBR) presents unique concerns. Residual amounts of sodium remaining in circuits and components must be passivated, inerted, or removed to preclude future concerns with sodium-air reactions that could generate potentially explosive mixtures of hydrogen and leave corrosive compounds. The passivation process being implemented utilizes a moist carbon dioxide gas that generates a passive layer of sodium carbonate/sodium bicarbonate over any quantities of residual sodium. Tests being conducted will determine the maximum depths of sodium that can be reacted using this method, defining the amount that must be dealt with later to achieve RCRA clean closure. Deactivation of the EBR-II complex is on schedule for a March, 2002, completion. Each system associated with EBR-II has an associated lay-up plan defining the system end state, as well as instructions for achieving the lay-up condition. A goal of system-by-system lay-up is to minimize

  7. A pesticide emission model (PEM) Part II: model evaluation

    NASA Astrophysics Data System (ADS)

    Scholtz, M. T.; Voldner, E.; Van Heyst, B. J.; McMillan, A. C.; Pattey, E.

    In the first part of the paper, the development of a numerical pesticide emission model (PEM) is described for predicting the volatilization of pesticides applied to agricultural soils and crops through soil incorporation, surface spraying, or in the furrow at the time of planting. In this paper the results of three steps toward the evaluation of PEM are reported. The evaluation involves: (i) verifying the numerical algorithms and computer code through comparison of PEM simulations with an available analytical solution of the advection/diffusion equation for semi-volatile solutes in soil; (ii) comparing hourly heat, moisture and emission fluxes of trifluralin and triallate modeled by PEM with fluxes measured using the relaxed eddy-accumulation technique; and (iii) comparison of the PEM predictions of persistence half-life for 29 pesticides with the ranges of persistence found in the literature. The overall conclusion from this limited evaluation study is that PEM is a useful model for estimating the volatilization rates of pesticides from agricultural soils and crops. The lack of reliable estimates of chemical and photochemical degradation rates of pesticide on foliage, however, introduces large uncertainties in the estimates from any model of the volatilization of pesticide that impacts the canopy.

  8. Dynamic spreading of nanofluids on solids part II: modeling.

    PubMed

    Liu, Kuan-Liang; Kondiparty, Kirtiprakash; Nikolov, Alex D; Wasan, Darsh

    2012-11-27

    Recent studies on the spreading phenomena of liquid dispersions of nanoparticles (nanofluids) have revealed that the self-layering and two-dimensional structuring of nanoparticles in the three-phase contact region exert structural disjoining pressure, which drives the spreading of nanofluids by forming a continuous wedge film between the liquid (e.g., oil) and solid surface. Motivated by the practical applications of the phenomenon and experimental results reported in Part I of this two-part series, we thoroughly investigated the spreading dynamics of nanofluids against an oil drop on a solid surface. With the Laplace equation as a starting point, the spreading process is modeled by Navier-Stokes equations through the lubrication approach, which considers the structural disjoining pressure, gravity, and van der Waals force. The temporal interface profile and advancing inner contact line velocity of nanofluidic films are analyzed through varying the effective nanoparticle concentration, the outer contact angle, the effective nanoparticle size, and capillary pressure. It is found that a fast and spontaneous advance of the inner contact line movement can be obtained by increasing the nanoparticle concentration, decreasing the nanoparticle size, and/or decreasing the interfacial tension. Once the nanofluidic film is formed, the advancing inner contact line movement reaches a constant velocity, which is independent of the outer contact angle if the interfacial tension is held constant.

  9. Modified sprint interval training protocols. Part II. Psychological responses.

    PubMed

    Townsend, Logan K; Islam, Hashim; Dunn, Emily; Eys, Mark; Robertson-Wilson, Jennifer; Hazell, Tom J

    2017-04-01

    Sprint-interval training (SIT) is a viable method to improve health and fitness. However, researchers have questioned the utility of SIT because of its strenuous nature. The current study aimed to determine if manipulating the sprint and recovery duration, while maintaining the 1:8 work to rest ratio, could uncover a more favourable SIT protocol. Nine healthy active males (age, 23.3 ± 3.0 years; body mass index, 22.4 ± 2.2 kg·m(-2); maximal oxygen consumption, 48.9 ± 5.3 mL·kg(-1)·min(-1)) participated in 3 experimental running SIT sessions: (i) 30:240 (4 × 30-s efforts, 240-s recovery), (ii) 15:120 (8 × 15-s efforts, 120-s recovery), (iii) 5:40 (24 × 5-s efforts, 40-s recovery), and (iv) a final behavioural choice follow-up session. Affect, intentions, task self-efficacy, enjoyment, and preference were evaluated. Midway through exercise, affect became more positive for 5:40 compared with 30:240 (p < 0.05) and postexercise affect was greater for both 5:40 (p = 0.014) and 15:120 (p = 0.015) compared with 30:240. Participants expressed greater intentions to perform 5:40 3 and 5 times/week compared with 15:120 and 30:240 (p < 0.05). Participants felt more confident in their ability to perform 5:40 (p = 0.001) and 15:120 (p = 0.008) compared with 30:240. The 5:40 session was also rated as more enjoyable than 15:120 (p = 0.025) and 30:240 (p = 0.026). All participants preferred the 5:40 protocol. These data suggest that shorter sprints with more repetitions are perceived as more enjoyable and lead to greater intentions to engage in SIT.

  10. IPCC Working Group II: Impacts and Adaptation Part I

    NASA Astrophysics Data System (ADS)

    Pulwarty, R. S.

    2007-12-01

    The IPCC (as opposed to the UN Framework Convention) defines climate change as" any change in climate over time, whether due to natural variability or as a result of human activity". The IPCC Working Group II (Impacts, Adaptation, Vulnerability) was charged with assessing the scientific, technical, environmental, economic, and social aspects of vulnerability to climate change, and, the negative and positive consequences for ecological systems, socio-economic sectors, and human health. The Working Group II report focused on the following issues for different sectors and regions (e.g. water, agriculture, biodiversity) and communities (coastal, island, etc.): · The role of adaptation in reducing vulnerability and impacts, · Assessment of adaptation capacity, options and constraints, and · Enhancing adaptation practice and operations. This presentation will address the following questions in the context of the results of the IPCC Fourth Assessment Report WG II: · What are the barriers, knowledge gaps, and opportunities for impacts assessments? · How are decisions about adaptation being made, and what types of adaptation strategies are being undertaken? · What are good adaptation practices and how are they learned over time? Examples will be drawn from the freshwater resources, small islands and adaptation chapters to which the presenter contributed. Many lessons have been identified but few have been implemented or evaluated over time. Adaptation occurs in the context of multiple stresses. Adaptation will be important in coping with early impacts in the near-term and continue to be important as our climate changes, regardless of how that change is derived. It is important to note that unmitigated climate change could, in the long term, exceed the capacity of different natural, managed and human systems to adapt. The assessment leads to the following conclusions: · Adaptation to climate change is already taking place, but on a limited basis · Adaptation measures

  11. Fundamentals of Trapped Ion Mobility Spectrometry Part II: Fluid Dynamics.

    PubMed

    Silveira, Joshua A; Michelmann, Karsten; Ridgeway, Mark E; Park, Melvin A

    2016-04-01

    Trapped ion mobility spectrometry (TIMS) is a new high resolution (R up to ~300) separation technique that utilizes an electric field to hold ions stationary against a moving gas. Recently, an analytical model for TIMS was derived and, in part, experimentally verified. A central, but not yet fully explored, component of the model involves the fluid dynamics at work. The present study characterizes the fluid dynamics in TIMS using simulations and ion mobility experiments. Results indicate that subsonic laminar flow develops in the analyzer, with pressure-dependent gas velocities between ~120 and 170 m/s measured at the position of ion elution. One of the key philosophical questions addressed is: how can mobility be measured in a dynamic system wherein the gas is expanding and its velocity is changing? We noted previously that the analytically useful work is primarily done on ions as they traverse the electric field gradient plateau in the analyzer. In the present work, we show that the position-dependent change in gas velocity on the plateau is balanced by a change in pressure and temperature, ultimately resulting in near position-independent drag force. That the drag force, and related variables, are nearly constant allows for the use of relatively simple equations to describe TIMS behavior. Nonetheless, we derive a more comprehensive model, which accounts for the spatial dependence of the flow variables. Experimental resolving power trends were found to be in close agreement with the theoretical dependence of the drag force, thus validating another principal component of TIMS theory.

  12. Fundamentals of Trapped Ion Mobility Spectrometry Part II: Fluid Dynamics

    NASA Astrophysics Data System (ADS)

    Silveira, Joshua A.; Michelmann, Karsten; Ridgeway, Mark E.; Park, Melvin A.

    2016-04-01

    Trapped ion mobility spectrometry (TIMS) is a new high resolution (R up to ~300) separation technique that utilizes an electric field to hold ions stationary against a moving gas. Recently, an analytical model for TIMS was derived and, in part, experimentally verified. A central, but not yet fully explored, component of the model involves the fluid dynamics at work. The present study characterizes the fluid dynamics in TIMS using simulations and ion mobility experiments. Results indicate that subsonic laminar flow develops in the analyzer, with pressure-dependent gas velocities between ~120 and 170 m/s measured at the position of ion elution. One of the key philosophical questions addressed is: how can mobility be measured in a dynamic system wherein the gas is expanding and its velocity is changing? We noted previously that the analytically useful work is primarily done on ions as they traverse the electric field gradient plateau in the analyzer. In the present work, we show that the position-dependent change in gas velocity on the plateau is balanced by a change in pressure and temperature, ultimately resulting in near position-independent drag force. That the drag force, and related variables, are nearly constant allows for the use of relatively simple equations to describe TIMS behavior. Nonetheless, we derive a more comprehensive model, which accounts for the spatial dependence of the flow variables. Experimental resolving power trends were found to be in close agreement with the theoretical dependence of the drag force, thus validating another principal component of TIMS theory.

  13. Autism and EMF? Plausibility of a pathophysiological link part II.

    PubMed

    Herbert, Martha R; Sage, Cindy

    2013-06-01

    Autism spectrum conditions (ASCs) are defined behaviorally, but they also involve multileveled disturbances of underlying biology that find striking parallels in the physiological impacts of electromagnetic frequency and radiofrequency radiation exposures (EMF/RFR). Part I (Vol 776) of this paper reviewed the critical contributions pathophysiology may make to the etiology, pathogenesis and ongoing generation of behaviors currently defined as being core features of ASCs. We reviewed pathophysiological damage to core cellular processes that are associated both with ASCs and with biological effects of EMF/RFR exposures that contribute to chronically disrupted homeostasis. Many studies of people with ASCs have identified oxidative stress and evidence of free radical damage, cellular stress proteins, and deficiencies of antioxidants such as glutathione. Elevated intracellular calcium in ASCs may be due to genetics or may be downstream of inflammation or environmental exposures. Cell membrane lipids may be peroxidized, mitochondria may be dysfunctional, and various kinds of immune system disturbances are common. Brain oxidative stress and inflammation as well as measures consistent with blood-brain barrier and brain perfusion compromise have been documented. Part II of this paper documents how behaviors in ASCs may emerge from alterations of electrophysiological oscillatory synchronization, how EMF/RFR could contribute to these by de-tuning the organism, and policy implications of these vulnerabilities. It details evidence for mitochondrial dysfunction, immune system dysregulation, neuroinflammation and brain blood flow alterations, altered electrophysiology, disruption of electromagnetic signaling, synchrony, and sensory processing, de-tuning of the brain and organism, with autistic behaviors as emergent properties emanating from this pathophysiology. Changes in brain and autonomic nervous system electrophysiological function and sensory processing predominate, seizures

  14. 40 CFR Appendix II to Part 600 - Sample Fuel Economy Calculations

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 31 2013-07-01 2013-07-01 false Sample Fuel Economy Calculations II... FUEL ECONOMY AND GREENHOUSE GAS EXHAUST EMISSIONS OF MOTOR VEHICLES Pt. 600, App. II Appendix II to Part 600—Sample Fuel Economy Calculations (a) This sample fuel economy calculation is applicable...

  15. 40 CFR Appendix II to Part 600 - Sample Fuel Economy Calculations

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 30 2011-07-01 2011-07-01 false Sample Fuel Economy Calculations II... FUEL ECONOMY AND CARBON-RELATED EXHAUST EMISSIONS OF MOTOR VEHICLES Pt. 600, App. II Appendix II to Part 600—Sample Fuel Economy Calculations (a) This sample fuel economy calculation is applicable...

  16. 40 CFR Appendix II to Part 600 - Sample Fuel Economy Calculations

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Sample Fuel Economy Calculations II... FUEL ECONOMY AND CARBON-RELATED EXHAUST EMISSIONS OF MOTOR VEHICLES Pt. 600, App. II Appendix II to Part 600—Sample Fuel Economy Calculations (a) This sample fuel economy calculation is applicable...

  17. PROBABILITY BASED CORROSION CONTROL FOR WASTE TANKS - PART II

    SciTech Connect

    Hoffman, E.; Edwards, T.

    2010-12-09

    As part of an ongoing study to evaluate the discontinuity in the corrosion controls at the SRS tank farm, a study was conducted this year to assess the minimum concentrations below 1 molar nitrate, see Figure 1. Current controls on the tank farm solution chemistry are in place to prevent the initiation and propagation of pitting and stress corrosion cracking in the primary steel waste tanks. The controls are based upon a series of experiments performed with simulated solutions on materials used for construction of the tanks, namely ASTM A537 carbon steel (A537). During FY09, an experimental program was undertaken to investigate the risk associated with reducing the minimum molar nitrite concentration required to confidently inhibit pitting in dilute solutions (i.e., less than 1 molar nitrate). The experimental results and conclusions herein provide a statistical basis to quantify the probability of pitting for the tank wall exposed to various solutions with dilute concentrations of nitrate and nitrite. Understanding the probability for pitting will allow the facility to make tank-specific risk-based decisions for chemistry control. Based on previous electrochemical testing, a statistical test matrix was developed to refine and solidify the application of the statistical mixture/amount model to corrosion of A537 steel. A mixture/amount model was identified based on statistical analysis of recent and historically collected electrochemical data. This model provides a more complex relationship between the nitrate and nitrite concentrations and the probability of pitting than is represented by the model underlying the current chemistry control program, and its use may provide a technical basis for the utilization of less nitrite to inhibit pitting at concentrations below 1 molar nitrate. FY09 results fit within the mixture/amount model, and further refine the nitrate regime in which the model is applicable. The combination of visual observations and cyclic

  18. FPGA-accelerated adaptive optics wavefront control part II

    NASA Astrophysics Data System (ADS)

    Mauch, S.; Barth, A.; Reger, J.; Reinlein, C.; Appelfelder, M.; Beckert, E.

    2015-03-01

    We present progressive work that is based on our recently developed rapid control prototyping system (RCP), designed for the implementation of high-performance adaptive optical control algorithms using a continuous de-formable mirror (DM). The RCP system, presented in 2014, is resorting to a Xilinx Kintex-7 Field Programmable Gate Array (FPGA), placed on a self-developed PCIe card, and installed on a high-performance computer that runs a hard real-time Linux operating system. For this purpose, algorithms for the efficient evaluation of data from a Shack-Hartmann wavefront sensor (SHWFS) on an FPGA have been developed. The corresponding analog input and output cards are designed for exploiting the maximum possible performance while not being constrained to a specific DM and control algorithm due to the RCP approach. In this second part of our contribution, we focus on recent results that we achieved with this novel experimental setup. By presenting results which are far superior to the former ones, we further justify the deployment of the RCP system and its required time and resources. We conducted various experiments for revealing the effective performance, i.e. the maximum manageable complexity in the controller design that may be achieved in real-time without performance losses. A detailed analysis of the hidden latencies is carried out, showing that these latencies have been drastically reduced. In addition, a series of concepts relating the evaluation of the wavefront as well as designing and synthesizing a wavefront are thoroughly investigated with the goal to overcome some of the prevalent limitations. Furthermore, principal results regarding the closed-loop performance of the low-speed dynamics of the integrated heater in a DM concept are illustrated in detail; to be combined with the piezo-electric high-speed actuators in the next step

  19. Topics in Chemical Instrumentation, Cl. Thermoluminescence: Part II. Instrumentation.

    ERIC Educational Resources Information Center

    Manche, Emanuel P.

    1979-01-01

    Presents part two on the use of the detection of thermoluminescence as an analytical tool for the chemistry laboratory and allied science. This part discusses instrumentation used and investigates recent developments in instrumentation for thermoluminescence. (HM)

  20. Coping With the Problems of a Technological Age, Part II.

    ERIC Educational Resources Information Center

    New York State Education Dept., Albany. Bureau of Secondary Curriculum Development.

    This is another report in a series of programs dealing with the problems of a technological age. It is assumed that teachers will use both parts of this report. Part I deals with the problems of technology and how it affects our lives. It also discusses the energy crisis created, in part, by technology and deals specifically with coal and…

  1. 10 CFR Appendix II to Part 1050 - DOE Form 3735.3-Foreign Travel Statement

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 4 2014-01-01 2014-01-01 false DOE Form 3735.3-Foreign Travel Statement II Appendix II to.... II Appendix II to Part 1050—DOE Form 3735.3—Foreign Travel Statement EC01OC91.041 Statement Concerning Acceptance of Travel or Travel Expenses From a Foreign Government Item 1. This statement is to...

  2. 10 CFR Appendix II to Part 1050 - DOE Form 3735.3-Foreign Travel Statement

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 4 2011-01-01 2011-01-01 false DOE Form 3735.3-Foreign Travel Statement II Appendix II to.... II Appendix II to Part 1050—DOE Form 3735.3—Foreign Travel Statement EC01OC91.041 Statement Concerning Acceptance of Travel or Travel Expenses From a Foreign Government Item 1.This statement is to...

  3. 10 CFR Appendix II to Part 1050 - DOE Form 3735.3-Foreign Travel Statement

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false DOE Form 3735.3-Foreign Travel Statement II Appendix II to.... II Appendix II to Part 1050—DOE Form 3735.3—Foreign Travel Statement EC01OC91.041 Statement Concerning Acceptance of Travel or Travel Expenses From a Foreign Government Item 1.This statement is to...

  4. 10 CFR Appendix II to Part 1050 - DOE Form 3735.3-Foreign Travel Statement

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 4 2013-01-01 2013-01-01 false DOE Form 3735.3-Foreign Travel Statement II Appendix II to.... II Appendix II to Part 1050—DOE Form 3735.3—Foreign Travel Statement EC01OC91.041 Statement Concerning Acceptance of Travel or Travel Expenses From a Foreign Government Item 1.This statement is to...

  5. 10 CFR Appendix II to Part 1050 - DOE Form 3735.3-Foreign Travel Statement

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 4 2012-01-01 2012-01-01 false DOE Form 3735.3-Foreign Travel Statement II Appendix II to.... II Appendix II to Part 1050—DOE Form 3735.3—Foreign Travel Statement EC01OC91.041 Statement Concerning Acceptance of Travel or Travel Expenses From a Foreign Government Item 1.This statement is to...

  6. Reforming Science Education: Part II. Utilizing Kieran Egan's Educational Metatheory

    ERIC Educational Resources Information Center

    Schulz, Roland M.

    2009-01-01

    This paper is the second of two parts and continues the conversation which had called for a shift in the conceptual focus of science education towards philosophy of education, with the requirement to develop a discipline-specific "philosophy" of science education. In Part I, conflicting conceptions of science literacy were identified with…

  7. Laboratory Connections. Commercial Interfacing Packages: Part II: Software and Applications.

    ERIC Educational Resources Information Center

    Powers, Michael H.

    1989-01-01

    Describes the titration of a weak base with a strong acid and subsequent treatment of experimental data using commercially available software. Provides a BASIC program for determining first and second derivatives of data input. Lists 6 references. (YP)

  8. Growth of lithium triborate crystals. II. Experimental results

    NASA Astrophysics Data System (ADS)

    Parfeniuk, C.; Samarasekera, I. V.; Weinberg, F.; Edel, J.; Fjeldsted, K.; Lent, B.

    1996-02-01

    In Part I [C. Parfeniuk, I.V. Samarasekera and F. Weinberg, J. Crystal Growth 158 (1996) 514], a mathematical model of the flux growth of lithium triborate (LBO) crystals was used to calculate the temperature distribution and fluid flow in the melt during growth. In this report the model results are related to experimental observations. Temperature measurements in the melt, for different crucible rotation rates, are compared to the corresponding temperatures determined from the model. Direct observations of fluid flow in the melt, using a transparent glycerol/water solution as a physical model, are related to the calculated flow paths and velocities. As the LBO crystal grows, the rejected MoO 3 flux concentrates ahead of the interface leading to the formation of eutectic phases. The factors leading to the formation of these phases are examined, using flow velocity values determined from the model. A number of LBO crystals were grown, first using convenient growth parameters, and then using parameters determined from the model results. The size and quality of the crystals obtained are discussed and related to the growth conditions.

  9. Classroom Demonstrations of Polymer Principles Part II. Polymer Formation.

    ERIC Educational Resources Information Center

    Rodriguez, F.; And Others

    1987-01-01

    This is part two in a series on classroom demonstrations of polymer principles. Described is how large molecules can be assembled from subunits (the process of polymerization). Examples chosen include both linear and branched or cross-linked molecules. (RH)

  10. Predictors of performance on the National Board of Chiropractic Examiners Parts I and II*

    PubMed Central

    McCall, Angela R.; Harvey, Richard D.

    2014-01-01

    Objective The purpose of this study was to examine predictors for success on Parts I and II of the National Board of Chiropractic Examiners (NBCE) written examinations. Methods Two validity studies were conducted to examine the criterion validity of Logan College assessments for Part I and II NBCE scores. Both studies consisted of a longitudinal design to examine the validity of entrance grade point average (GPA), in-program chiropractic course content GPA, and an institutional practice exam on Parts I and II of the NBCE. Results Analyses revealed that Part I GPA and practice exam scores combined accounted for 72% of the variance within Part I NBCE scores. Furthermore, every subtest of the Part I NBCE could be reliably predicted by course performance. In the 2nd study, Part I GPA, Part I NBCE score, and Part II GPA accounted for 75% of the variance within Part II NBCE scores. Conclusions Internal training and educational assessments (eg, course grades and practice exams) proved to be strong determinants of NBCE performance above and beyond initial levels of preparedness, thus validating the impact of the chiropractic curriculum on NBCE test achievement. PMID:24611459

  11. Mental Retardation Grants; Part II, Research and Demonstration. Fiscal Year 1968.

    ERIC Educational Resources Information Center

    Department of Health, Education, and Welfare, Washington, DC. Secretary's Committee on Mental Retardation.

    Part II of a two-part publication listing mental retardation grants awarded by the U.S. Department of Health, Education, and Welfare in fiscal year 1968 (July 1, 1967, to June 30, 1968), the text includes grants awarded in the areas of research and demonstration. (Part I covers grants in training and construction.) Grants are arranged according to…

  12. A model of neurovascular coupling and the BOLD response PART II.

    PubMed

    Mathias, E J; Plank, M J; David, T

    2017-04-01

    A mathematical model is developed which describes a signalling mechanism of neurovascular coupling with a model of a pyramidal neuron and its corresponding fMRI BOLD response. In the first part of two papers (Part I) we described the integration of the neurovascular coupling unit extended to include a complex neuron model, which includes the important Na/K ATPase pump, with a model that provides a BOLD signal taking its input from the cerebral blood flow and the metabolic rate of oxygen consumption. We showed that this produced a viable signal in terms of initial dip, positive and negative BOLD signals. In this paper (PART II) our model predicts the variations of the BOLD response due to variations in neuronal activity and indicates that the BOLD signal could be used as an initial biomarker for neuronal dysfunction or variations in the perfusion of blood to the cerebral tissue. We have compared the simulated hypoxic BOLD response to experimental BOLD signals observed in the hippocampus during hypoxia showing good agreement. This approach of combined quantitative modelling of neurovascular coupling response and its BOLD response will enable more specific assessment of a brain region.

  13. Electron diffraction based analysis of phase fractions and texture in nanocrystalline thin films, part II: implementation.

    PubMed

    Lábár, János L

    2009-02-01

    This series of articles describes a method that performs (semi)quantitative phase analysis for nanocrystalline transmission electron microscope samples from selected area electron diffraction (SAED) patterns. Volume fractions of phases and their textures are obtained separately in the method. First, the two-dimensional SAED pattern is converted into an X-ray diffraction-like one-dimensional distribution. Volume fractions of the nanocrystalline components are determined by fitting the spectral components, calculated for the previously identified phases with a priori known structures. Blackman correction is also applied to take into account dynamic effects for medium grain sizes. Peak shapes and experimental parameters (camera length, etc.) are refined during the fitting iterations. Parameter space is explored with the help of the Downhill-SIMPLEX algorithm. Part I presented the principles, while Part II now elaborates current implementation, and Part III will demonstrate its usage by examples. The method is implemented in a computer program that runs under the Windows operating system on IBM PC compatible machines.

  14. Collision of a vortex ring on granular material. Part II. Erosion of the granular layer

    NASA Astrophysics Data System (ADS)

    Yoshida, Junya; Masuda, Naoya; Ito, Boku; Furuya, Takayoshi; Sano, Osamu

    2012-02-01

    In our previous paper (part I), an experimental result was presented on the normal impact of a vortex ring on the granular layer (glass beads of diameter 0.10 mm), which was placed at a specified distance from the outlet of the vortex ring generator. The Reynolds number of the vortex ring ranged from 1000 to 6000, whereas the traveling distance ranged from 2 to 13 times of the diameter of the vortex ring generator nozzle. In part I, the deformation of the vortex ring impacting on the granular layer and the development of the secondary vortex ring were focused. In this paper (part II), the erosion of the granular surface by the vortex ring is described. Various patterns were found depending on the Reynolds number of the vortex ring and the traveling distance. Two patterns, one (grooves) which has radial striations from the central depressed region to the outer edge of the rim and the other (dimples) which is characterized by isolated small depressions around the outer edge of the rim, are examined in detail. The formation processes of these patterns are elucidated in terms of the deformation of the vortex ring.

  15. Computational and experimental prediction of dust production in pebble bed reactors -- Part I

    SciTech Connect

    Maziar Rostamian; Gannon Johnson; Mie Hiruta; Gabriel P. Potirniche; Abderrafi M. Ougouag; Joshua J. Cogliati; Akira Tokuhiro

    2013-10-01

    This paper describes the computational modeling and simulation, and experimental testing of graphite moderators in frictional contacts as anticipated in a pebble bed reactor. The potential of carbonaceous particulate generation due to frictional contact at the surface of pebbles and the ensuing entrainment and transport into the gas coolant are safety concerns at elevated temperatures under accident scenarios such as air ingress in the high temperature gas-cooled reactor. The safety concerns are due to the documented ability of carbonaceous particulates to adsorb fission products and transport them in the primary circuit of the pebble bed reactor, thus potentially giving rise to a relevant source term under accident scenarios. Here, a finite element approach is implemented to develop a nonlinear wear model in air environment. In this model, material wear coefficient is related to the changes in asperity height during wear. The present work reports a comparison between the finite element simulations and the experimental results obtained using a custom-designed tribometer. The experimental and computational results are used to estimate the quantity of nuclear grade graphite dust produced from a typical anticipated configuration. In Part II, results from a helium environment at higher temperatures and pressures are experimentally studied.

  16. Charting Relationships in American Popular Film. Part II.

    ERIC Educational Resources Information Center

    Burke, Ken

    1998-01-01

    Explores the concept of genre evolution through the experimental, classic, refinement, and deconstructivist phases of American films. A series of detailed diagrams present a synthesis of influences and developments in the western, supercop, detective, gangster, futuristic science fiction, fantasy, outer space science fiction, horror, musical, and…

  17. Operational strategies for dispatchable combined cycle plants, Part II

    SciTech Connect

    Nolan, J.P.; Landis, F.P.

    1996-11-01

    The Brush Cogeneration Facility is a dual-unit, combined cycle, cogeneration plant, operating in a dual cycling, automatically-dispatchable mode. Part I of this report described the contract, including automatic generation control (AGC) by Public Service Company of Colorado (PSCO), and the operation of Unit One. This part of the report covers the operation of Unit Two. Unit two is still in its operating infancy, but is showing that fuel efficiency and low emissions levels are not incompatible with cycling, load-following service. 1 fig.

  18. Karst geomorphology: From hydrological functioning to palaeoenvironmental reconstructions. Part II

    NASA Astrophysics Data System (ADS)

    De Waele, Jo; Gutierrez, Francisco; Audra, Philippe

    2015-10-01

    In January 2015, the first part of the special issue on karst, entitled "Karst geomorphology: From hydrological functioning to palaeoenvironmental reconstructions" was published (Geomorphology, Vol. 229). This second part of the special issue comprises seven research papers covering a broad geographical canvas including Japan, Slovenia, France, Spain, Croatia, and Poland-Ukraine. Both issues mainly emanate from the contributions presented in the Karst session of the 8th International Conference of Geomorphology (International Association of Geomorphologists), held in Paris in August 2013, enriched with some invited papers.

  19. Biomedical research ethics: an Islamic view part II.

    PubMed

    Afifi, Raafat Y

    2007-12-01

    In part I of this article I discussed why Islam rejects secularization and this is not because the ethical principles embedded in Islam's teachings are archaic and out of touch with current realities. In addition, I pointed out the agreement between general broad principles of research ethics and Islamic teachings concerning life; which showed clearly that Islam has addressed the regulation of ethics in research more than 14 centuries ago. In this part, I will address two controversial issues concerning women's rights and age of consent for children as possible research subjects in a Muslim community.

  20. Curriculum Guide for Hospitality Education. Part II. Exemplary Project.

    ERIC Educational Resources Information Center

    Kalani, Henry

    This second of a two-part study designed to develop a hospitality education program model for Hawaii's community colleges is based on the primary data gathered in a survey of the hospitality industry characteristics, manpower requirements, and employment demands. (Survey data is reported in volume 1 of the study.) The introductory section of this…

  1. Finding Out about Archaeology: Parts I and II.

    ERIC Educational Resources Information Center

    Archaeological Inst. of America, Boston, MA.

    This packet of materials presents selected, descriptive bibliographies for children and young adults. Instructional materials for the use of teachers and parents are also included. Focusing on the subject of archaeology, part 1 of the annotated bibliography presents instructional materials coded for appropriate grade level use. Each entry…

  2. Solar Energy Education. Reader, Part II. Sun story. [Includes glossary

    SciTech Connect

    Not Available

    1981-05-01

    Magazine articles which focus on the subject of solar energy are presented. The booklet prepared is the second of a four part series of the Solar Energy Reader. Excerpts from the magazines include the history of solar energy, mythology and tales, and selected poetry on the sun. A glossary of energy related terms is included. (BCS)

  3. CONTEMPORARY ARABIC READERS--II. ARABIC ESSAYS, PART 1. TEXTS.

    ERIC Educational Resources Information Center

    MCCARUS, ERNEST N.; AND OTHERS

    INTENDED FOR INTERMEDIATE-LEVEL STUDENTS, "PART 1" OF THIS SECOND VOLUME IN THE "CONTEMPORARY ARABIC READERS" SERIES PRESENTS A COLLECTION OF 20 ESSAYS WRITTEN BY OUTSTANDING ARAB LITERARY FIGURES. SUBJECTS RANGE FROM POLITICAL AND RELIGIOUS PHILOSOPHY IN THE ARAB WORLD TO ECONOMIC DEVELOPMENT AND REFORMS IN AGRICULTURE AND THE WRITING SYSTEM. THE…

  4. The Need for Ocean Literacy in the Classroom: Part II

    ERIC Educational Resources Information Center

    Schoedinger, Sarah; Cava, Francesca; Jewell, Beth

    2006-01-01

    As mentioned in Part I, certain classroom activities can help students learn about the ocean and empower them to make informed decisions about their impacts on the environment. One such activity focuses on harmful algal blooms (HABs). In this article, the authors include background information on HABs and then present two activities. Activity 1 is…

  5. Aesthetic Pursuits: Windows, Frames, Words, Images--Part II

    ERIC Educational Resources Information Center

    Burke, Ken

    2005-01-01

    In Part I of this study (Burke, 2005), the author presented the essentials of Image Presentation Theory--IPT--and its application to the analytical explication of various spatial designs in and psychological responses to images, from the illusions of depth in what is referred to as "windows" in cinema theory to the more patterned abstractions of…

  6. DIY Soundcard Based Temperature Logging System. Part II: Applications

    ERIC Educational Resources Information Center

    Nunn, John

    2016-01-01

    This paper demonstrates some simple applications of how temperature logging systems may be used to monitor simple heat experiments, and how the data obtained can be analysed to get some additional insight into the physical processes. [For "DIY Soundcard Based Temperature Logging System. Part I: Design," see EJ1114124.

  7. Topics in Finance: Part II--Financial Analysis

    ERIC Educational Resources Information Center

    Laux, Judy

    2010-01-01

    The second article in a series designed to supplement the introductory financial management course, this essay addresses financial statement analysis, including its impact on stock valuation, disclosure, and managerial behavior. [For "Topics in Finance Part I--Introduction and Stockholder Wealth Maximization," see EJ1060345.

  8. Surface anatomy and surface landmarks for thoracic surgery: Part II.

    PubMed

    Smith, Shona E; Darling, Gail E

    2011-05-01

    Surface anatomy is an integral part of a thoracic surgeon's armamentarium to assist with the diagnosis, staging, and treatment of thoracic pathology. As reviewed in this article, the surface landmarks of the lungs, heart, great vessels, and mediastinum are critical for appropriate patient care and should be learned in conjunction with classic anatomy.

  9. Searching for the Right Way to Begin Class: Part II

    ERIC Educational Resources Information Center

    Lawry, John D.

    2012-01-01

    Part I, "Searching for the Right Way to Begin Class," described the various iterations of beginning class rituals the author used over the years. Those rituals began with a prayer to the Holy Spirit as was required at the Catholic women's college Marymount in Tarrytown, New York, where he first taught out of graduate school in 1965. That…

  10. Laboratory Animal Housing--Parts I and II.

    ERIC Educational Resources Information Center

    Runkle, Robert S.

    1963-01-01

    In recent years, the use of laboratory animals for bio-medical research has shown marked increase. Economic and efficient housing is a necessity. This two part report established guidelines for design and selection of materials for conventional animal housing. Contents include--(1) production and breeding facilities, (2) quarantine facilities, (3)…

  11. High-speed Oil Engines for Vehicles. Part II

    NASA Technical Reports Server (NTRS)

    Hausfelder, Ludwig

    1927-01-01

    Further progress toward the satisfactory solution of the difficult problem of the distribution and atomization of the injected fuel was made by extensive experimentation with various fuel valves, nozzles, and atomizing devices. Valuable information was also obtained through numerous experimental researches on the combustion of oils and the manner of introducing the combustion air into the cylinder, as well as on the physical processes of atomization, the determination of the size of drops, etc. These researches led to the conclusion that it is possible, even without producing great turbulence in the combustion chamber and at moderate pump pressure, if the degree of atomization and the penetrative power of the fuel jet are adapted to the shape of the combustion chamber and to the dimensions of the cylinder.

  12. Fourier Transform Infrared Spectroscopy: Part II. Advantages of FT-IR.

    ERIC Educational Resources Information Center

    Perkins, W. D.

    1987-01-01

    This is Part II in a series on Fourier transform infrared spectroscopy (FT-IR). Described are various advantages of FT-IR spectroscopy including energy advantages, wavenumber accuracy, constant resolution, polarization effects, and stepping at grating changes. (RH)

  13. 40 CFR Appendix II to Part 1068 - Emission-Related Parameters and Specifications

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 33 2014-07-01 2014-07-01 false Emission-Related Parameters and Specifications II Appendix II to Part 1068 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED.... Pressure and vacuum relief settings. XI. Warning Systems Related to Emission Controls. 1....

  14. 40 CFR Appendix II to Part 1042 - Steady-State Duty Cycles

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 33 2011-07-01 2011-07-01 false Steady-State Duty Cycles II Appendix II to Part 1042 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW AND IN-USE MARINE COMPRESSION-IGNITION ENGINES AND VESSELS Pt....

  15. 40 CFR Appendix II to Part 266 - Tier I Feed Rate Screening Limits for Total Chlorine

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 28 2012-07-01 2012-07-01 false Tier I Feed Rate Screening Limits for Total Chlorine II Appendix II to Part 266 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Screening Limits for Total Chlorine Terrain-adjusted effective stack height (m) Noncomplex Terrain Urban...

  16. 40 CFR Appendix II to Part 266 - Tier I Feed Rate Screening Limits for Total Chlorine

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 27 2011-07-01 2011-07-01 false Tier I Feed Rate Screening Limits for Total Chlorine II Appendix II to Part 266 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Screening Limits for Total Chlorine Terrain-adjusted effective stack height (m) Noncomplex Terrain Urban...

  17. 40 CFR Appendix II to Part 266 - Tier I Feed Rate Screening Limits for Total Chlorine

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 27 2014-07-01 2014-07-01 false Tier I Feed Rate Screening Limits for Total Chlorine II Appendix II to Part 266 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Screening Limits for Total Chlorine Terrain-adjusted effective stack height (m) Noncomplex Terrain Urban...

  18. 40 CFR Appendix II to Part 266 - Tier I Feed Rate Screening Limits for Total Chlorine

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 28 2013-07-01 2013-07-01 false Tier I Feed Rate Screening Limits for Total Chlorine II Appendix II to Part 266 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Screening Limits for Total Chlorine Terrain-adjusted effective stack height (m) Noncomplex Terrain Urban...

  19. 40 CFR Appendix II to Part 266 - Tier I Feed Rate Screening Limits for Total Chlorine

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 26 2010-07-01 2010-07-01 false Tier I Feed Rate Screening Limits for Total Chlorine II Appendix II to Part 266 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Screening Limits for Total Chlorine Terrain-adjusted effective stack height (m) Noncomplex Terrain Urban...

  20. 40 CFR Appendix II to Part 1045 - Duty Cycles for Propulsion Marine Engines

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 34 2012-07-01 2012-07-01 false Duty Cycles for Propulsion Marine...) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM SPARK-IGNITION PROPULSION MARINE ENGINES AND VESSELS Pt. 1045, App. II Appendix II to Part 1045—Duty Cycles for Propulsion Marine Engines (a)...

  1. 40 CFR Appendix II to Part 258 - List of Hazardous Inorganic and Organic Constituents

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 26 2012-07-01 2011-07-01 true List of Hazardous Inorganic and Organic Constituents II Appendix II to Part 258 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... of Hazardous Inorganic and Organic Constituents Common name 1 CAS RN 2 Chemical abstracts...

  2. 40 CFR Appendix II to Part 258 - List of Hazardous Inorganic and Organic Constituents

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 24 2010-07-01 2010-07-01 false List of Hazardous Inorganic and Organic Constituents II Appendix II to Part 258 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... 258—List of Hazardous Inorganic and Organic Constituents Common name 1 CAS RN 2 Chemical...

  3. 40 CFR Appendix II to Part 258 - List of Hazardous Inorganic and Organic Constituents

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 26 2013-07-01 2013-07-01 false List of Hazardous Inorganic and Organic Constituents II Appendix II to Part 258 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... 258—List of Hazardous Inorganic and Organic Constituents Common name 1 CAS RN 2 Chemical...

  4. 40 CFR Appendix II to Part 258 - List of Hazardous Inorganic and Organic Constituents

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 25 2014-07-01 2014-07-01 false List of Hazardous Inorganic and Organic Constituents II Appendix II to Part 258 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... 258—List of Hazardous Inorganic and Organic Constituents Common name 1 CAS RN 2 Chemical...

  5. 40 CFR Appendix II to Part 258 - List of Hazardous Inorganic and Organic Constituents

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 25 2011-07-01 2011-07-01 false List of Hazardous Inorganic and Organic Constituents II Appendix II to Part 258 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... 258—List of Hazardous Inorganic and Organic Constituents Common name 1 CAS RN 2 Chemical...

  6. 31 CFR Appendix II to Part 13 - Form of Bill for Reimbursement

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Form of Bill for Reimbursement II Appendix II to Part 13 Money and Finance: Treasury Office of the Secretary of the Treasury PROCEDURES FOR... Accounting Office at such reasonable times and places as may be mutually agreed upon by said...

  7. 40 CFR Appendix II to Part 1045 - Duty Cycles for Propulsion Marine Engines

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 33 2014-07-01 2014-07-01 false Duty Cycles for Propulsion Marine...) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM SPARK-IGNITION PROPULSION MARINE ENGINES AND VESSELS Pt. 1045, App. II Appendix II to Part 1045—Duty Cycles for Propulsion Marine Engines (a)...

  8. 40 CFR Appendix II to Part 1045 - Duty Cycles for Propulsion Marine Engines

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Duty Cycles for Propulsion Marine...) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM SPARK-IGNITION PROPULSION MARINE ENGINES AND VESSELS Pt. 1045, App. II Appendix II to Part 1045—Duty Cycles for Propulsion Marine Engines (a)...

  9. 40 CFR Appendix II to Part 1045 - Duty Cycles for Propulsion Marine Engines

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 34 2013-07-01 2013-07-01 false Duty Cycles for Propulsion Marine...) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM SPARK-IGNITION PROPULSION MARINE ENGINES AND VESSELS Pt. 1045, App. II Appendix II to Part 1045—Duty Cycles for Propulsion Marine Engines (a)...

  10. 40 CFR Appendix II to Part 1045 - Duty Cycles for Propulsion Marine Engines

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 33 2011-07-01 2011-07-01 false Duty Cycles for Propulsion Marine...) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM SPARK-IGNITION PROPULSION MARINE ENGINES AND VESSELS Pt. 1045, App. II Appendix II to Part 1045—Duty Cycles for Propulsion Marine Engines (a)...

  11. Part I. Mechanisms of injury associated with extracorporeal shock wave lithotripsy; Part II. Exsolution of volatiles

    NASA Astrophysics Data System (ADS)

    Howard, Danny Dwayne

    Part I - Shock waves are focused in extracorporeal shock wave lithotripsy (ESWL) machines to strengths sufficient to fracture kidney stones. Substantial side effects-most of them acute-have resulted from this procedure, including injury to soft tissue. The focusing of shock waves through various layers of tissue is a complex process which stimulates many bio-mechano-chemical responses.This thesis presents results of an in vitro study of the initial mechanical stimulus. Planar nitrocellulose membranes of order 10 um thick were used as models of thin tissue structures. Two modes of failure were recorded: Failure due to cavitation collapsing on or near the membranes, and failure induced by altering the structure of shock waves. Tests were done in water at and around F2 to characterize the extent of cavitation damage, and was found to be confined within the focal region, 1.2 cm along the axis of focus.Scattering media were used to simulate the effects of acoustic nonuniformity of tissue and to alter the structure of focusing shock waves. 40 um diameter (average) hollow glass spheres were added to ethylene glycol, glycerine and castor oil to vary the properties of the scattering media. Multiple layer samples of various types of phantom tissue were tested in degassed castor oil to gauge the validity of the scattering media. The scattering media and tissue samples increased the rise time decreased strain rate in a similar fashion. Membranes were damaged by the decreased strain rate and accumulated effects of the altered structure: After about 20 or so shocks immersed in the scattering media and after about 100 shocks behind the tissue samples. The mode of failure was tearing with multiple tears in some cases from about .1 cm to about 3 cm depending of the number of shocks and membrane thickness.Part II - This work examines the exsolution of volatiles-carbon dioxide from water-in a cylindrical test cell under different pressure conditions. Water was supersaturated with

  12. Achieving hemostasis in dermatology-Part II: Topical hemostatic agents.

    PubMed

    Glick, Jaimie B; Kaur, Ravneet R; Siegel, Daniel

    2013-07-01

    Bleeding is a common occurrence during any dermatologic surgery that disrupts blood vessels. The complications of excess bleeding can include delayed wound healing, hematoma formation, infection, dehiscence, and necrosis. In part one of this review, we discussed the pre-operative, intra-operative, and post-operative management of patients undergoing dermatologic surgery. In Part two, we discuss traditional and new topical hemostatic agents used to achieve hemostasis in dermatological procedures and surgery. We will evaluate the caustic and non-caustic hemostatic agents as well as hemostatic dressings. The mechanisms of action, side effect profile, and advantages and disadvantages of the topical hemostatic agents are provided. Sources for this article were found searching the English literature in PubMed for the time period 1940 to March 2012. A thorough bibliography search was also performed and key references examined.

  13. GSTARS computer models and their applications, Part II: Applications

    USGS Publications Warehouse

    Simoes, F.J.M.; Yang, C.T.

    2008-01-01

    In part 1 of this two-paper series, a brief summary of the basic concepts and theories used in developing the Generalized Stream Tube model for Alluvial River Simulation (GSTARS) computer models was presented. Part 2 provides examples that illustrate some of the capabilities of the GSTARS models and how they can be applied to solve a wide range of river and reservoir sedimentation problems. Laboratory and field case studies are used and the examples show representative applications of the earlier and of the more recent versions of GSTARS. Some of the more recent capabilities implemented in GSTARS3, one of the latest versions of the series, are also discussed here with more detail. ?? 2008 International Research and Training Centre on Erosion and Sedimentation and the World Association for Sedimentation and Erosion Research.

  14. Power and power-to-flow reactivity transfer functions in EBR-II (Experimental Breeder Reactor II) fuel

    SciTech Connect

    Grimm, K.N.; Meneghetti, D. )

    1989-11-01

    Reactivity transfer functions are important in determining the reactivity history during a power transient. Overall nodal transfer functions have been calculated for different subassembly types in the Experimental Breeder Reactor II (EBR-II). Steady-state calculations for temperature changes and, hence, reactivities for power changes have been separated into power and power-to-flow-dependent terms. Axial nodal transfer functions separated into power and power-to-flow-dependent components are reported in this paper for a typical EBR-II fuel pin. This provides an improved understanding of the time dependence of these components in transient situations.

  15. Glass polymorphism in glycerol-water mixtures: II. Experimental studies.

    PubMed

    Bachler, Johannes; Fuentes-Landete, Violeta; Jahn, David A; Wong, Jessina; Giovambattista, Nicolas; Loerting, Thomas

    2016-04-28

    We report a detailed experimental study of (i) pressure-induced transformations in glycerol-water mixtures at T = 77 K and P = 0-1.8 GPa, and (ii) heating-induced transformations of glycerol-water mixtures recovered at 1 atm and T = 77 K. Our samples are prepared by cooling the solutions at ambient pressure at various cooling rates (100 K s(-1)-10 K h(-1)) and for the whole range of glycerol mole fractions, χ(g). Depending on concentration and cooling rates, cooling leads to samples containing amorphous ice (χg ≥ 0.20), ice (χ(g) ≤ 0.32), and/or "distorted ice" (0 < χ(g) ≤ 0.38). Upon compression, we find that (a) fully vitrified samples at χ(g) ≥ 0.20 do not show glass polymorphism, in agreement with previous works; (b) samples containing ice show pressure-induced amorphization (PIA) leading to the formation of high-density amorphous ice (HDA). PIA of ice domains within the glycerol-water mixtures is shown to be possible only up to χ(g) ≈ 0.32 (T = 77 K). This is rather surprising since it has been known that at χ(g) < 0.38, cooling leads to phase-separated samples with ice and maximally freeze-concentrated solution of χ(g) ≈ 0.38. Accordingly, in the range 0.32 < χ(g) < 0.38, we suggest that the water domains freeze into an interfacial ice, i.e., a highly-distorted form of layered ice, which is unable to transform to HDA upon compression. Upon heating samples recovered at 1 atm, we observe a rich phase behavior. Differential scanning calorimetry indicates that only at χ(g) ≤ 0.15, the water domains within the sample exhibit polyamorphism, i.e., the HDA-to-LDA (low-density amorphous ice) transformation. At 0.15 < χ(g) ≤ 0.38, samples contain ice, interfacial ice, and/or HDA domains. All samples (χ(g) ≤ 0.38) show: the crystallization of amorphous ice domains, followed by the glass transition of the vitrified glycerol-water domains and, finally, the melting of ice at high temperatures. Our work exemplifies the complex "phase" behavior

  16. Glass polymorphism in glycerol–water mixtures: II. Experimental studies

    PubMed Central

    Bachler, Johannes; Fuentes-Landete, Violeta; Jahn, David A.; Wong, Jessina; Giovambattista, Nicolas

    2016-01-01

    We report a detailed experimental study of (i) pressure-induced transformations in glycerol–water mixtures at T = 77 K and P = 0–1.8 GPa, and (ii) heating-induced transformations of glycerol–water mixtures recovered at 1 atm and T = 77 K. Our samples are prepared by cooling the solutions at ambient pressure at various cooling rates (100 K s–1–10 K h–1) and for the whole range of glycerol mole fractions, χ g. Depending on concentration and cooling rates, cooling leads to samples containing amorphous ice (χ g ≥ 0.20), ice (χ g ≤ 0.32), and/or “distorted ice” (0 < χ g ≤ 0.38). Upon compression, we find that (a) fully vitrified samples at χ g ≥ 0.20 do not show glass polymorphism, in agreement with previous works; (b) samples containing ice show pressure-induced amorphization (PIA) leading to the formation of high-density amorphous ice (HDA). PIA of ice domains within the glycerol–water mixtures is shown to be possible only up to χ g ≈ 0.32 (T = 77 K). This is rather surprising since it has been known that at χ g < 0.38, cooling leads to phase-separated samples with ice and maximally freeze-concentrated solution of χ g ≈ 0.38. Accordingly, in the range 0.32 < χ g < 0.38, we suggest that the water domains freeze into an interfacial ice, i.e., a highly-distorted form of layered ice, which is unable to transform to HDA upon compression. Upon heating samples recovered at 1 atm, we observe a rich phase behavior. Differential scanning calorimetry indicates that only at χ g ≤ 0.15, the water domains within the sample exhibit polyamorphism, i.e., the HDA-to-LDA (low-density amorphous ice) transformation. At 0.15 < χ g ≤ 0.38, samples contain ice, interfacial ice, and/or HDA domains. All samples (χ g ≤ 0.38) show: the crystallization of amorphous ice domains, followed by the glass transition of the vitrified glycerol–water domains and, finally, the melting of ice at high temperatures. Our work exemplifies the complex

  17. Underwater Electromagnetic Sensor Networks, Part II: Localization and Network Simulations.

    PubMed

    Zazo, Javier; Macua, Sergio Valcarcel; Zazo, Santiago; Pérez, Marina; Pérez-Álvarez, Iván; Jiménez, Eugenio; Cardona, Laura; Brito, Joaquín Hernández; Quevedo, Eduardo

    2016-12-17

    In the first part of the paper, we modeled and characterized the underwater radio channel in shallowwaters. In the second part,we analyze the application requirements for an underwaterwireless sensor network (U-WSN) operating in the same environment and perform detailed simulations. We consider two localization applications, namely self-localization and navigation aid, and propose algorithms that work well under the specific constraints associated with U-WSN, namely low connectivity, low data rates and high packet loss probability. We propose an algorithm where the sensor nodes collaboratively estimate their unknown positions in the network using a low number of anchor nodes and distance measurements from the underwater channel. Once the network has been self-located, we consider a node estimating its position for underwater navigation communicating with neighboring nodes. We also propose a communication system and simulate the whole electromagnetic U-WSN in the Castalia simulator to evaluate the network performance, including propagation impairments (e.g., noise, interference), radio parameters (e.g., modulation scheme, bandwidth, transmit power), hardware limitations (e.g., clock drift, transmission buffer) and complete MAC and routing protocols. We also explain the changes that have to be done to Castalia in order to perform the simulations. In addition, we propose a parametric model of the communication channel that matches well with the results from the first part of this paper. Finally, we provide simulation results for some illustrative scenarios.

  18. Slag Behavior in Gasifiers. Part II: Constitutive Modeling of Slag

    SciTech Connect

    Massoudi, Mehrdad; Wang, Ping

    2013-02-07

    The viscosity of slag and the thermal conductivity of ash deposits are among two of the most important constitutive parameters that need to be studied. The accurate formulation or representations of the (transport) properties of coal present a special challenge of modeling efforts in computational fluid dynamics applications. Studies have indicated that slag viscosity must be within a certain range of temperatures for tapping and the membrane wall to be accessible, for example, between 1,300 °C and 1,500 °C, the viscosity is approximately 25 Pa·s. As the operating temperature decreases, the slag cools and solid crystals begin to form. Since slag behaves as a non-linear fluid, we discuss the constitutive modeling of slag and the important parameters that must be studied. We propose a new constitutive model, where the stress tensor not only has a yield stress part, but it also has a viscous part with a shear rate dependency of the viscosity, along with temperature and concentration dependency, while allowing for the possibility of the normal stress effects. In Part I, we reviewed, identify and discuss the key coal ash properties and the operating conditions impacting slag behavior.

  19. Underwater Electromagnetic Sensor Networks, Part II: Localization and Network Simulations

    PubMed Central

    Zazo, Javier; Valcarcel Macua, Sergio; Zazo, Santiago; Pérez, Marina; Pérez-Álvarez, Iván; Jiménez, Eugenio; Cardona, Laura; Brito, Joaquín Hernández; Quevedo, Eduardo

    2016-01-01

    In the first part of the paper, we modeled and characterized the underwater radio channel in shallow waters. In the second part, we analyze the application requirements for an underwater wireless sensor network (U-WSN) operating in the same environment and perform detailed simulations. We consider two localization applications, namely self-localization and navigation aid, and propose algorithms that work well under the specific constraints associated with U-WSN, namely low connectivity, low data rates and high packet loss probability. We propose an algorithm where the sensor nodes collaboratively estimate their unknown positions in the network using a low number of anchor nodes and distance measurements from the underwater channel. Once the network has been self-located, we consider a node estimating its position for underwater navigation communicating with neighboring nodes. We also propose a communication system and simulate the whole electromagnetic U-WSN in the Castalia simulator to evaluate the network performance, including propagation impairments (e.g., noise, interference), radio parameters (e.g., modulation scheme, bandwidth, transmit power), hardware limitations (e.g., clock drift, transmission buffer) and complete MAC and routing protocols. We also explain the changes that have to be done to Castalia in order to perform the simulations. In addition, we propose a parametric model of the communication channel that matches well with the results from the first part of this paper. Finally, we provide simulation results for some illustrative scenarios. PMID:27999309

  20. Cancer Chemotherapy: Past, Present, and Future—Part II

    PubMed Central

    Wright, Jane C.

    1984-01-01

    Cancer is of major concern today because of its high mortality. It is estimated that 66 million people in this country will eventually develop cancer; 1983 estimates were 855,000 new cases and 440,000 deaths from cancer. Because of limitations of surgery and radiation therapy in effecting a cure for cancer, chemotherapy has become increasingly important. The developments in the chemical control of cancer in man are encouraging. This two-part paper* covers the historical milestones in the development of the chemical and hormonal control of cancer, present successes with the use of polychemotherapy, and the hopeful trend in research. PMID:6492179

  1. Responsive Persistence Part II. Practices of Postmodern Therapists.

    PubMed

    Sutherland, Olga; Dienhart, Anna; Turner, Jean

    2013-10-01

    This article, a companion to Part I of this series of articles, discusses how therapists informed by social constructionist and postmodern ideas enact persistence in their work with families. Transcripts and video-recordings of therapy interaction facilitated by selected major champions for three postmodern (collaborative) therapies: Michael White (narrative therapy), Harlene Anderson (collaborative language systems approach), and Bill O'Hanlon (solution-oriented therapy) were examined for persistence practices. The article offers a range of possible ways in which postmodern therapists may enact their influence in facilitating generative and helpful conversations with families and remain responsive to clients' preferences and understandings. Implications for family therapy practice, training, and supervision are discussed.

  2. Nanoparticles and the blood coagulation system. Part II: safety concerns.

    PubMed

    Ilinskaya, Anna N; Dobrovolskaia, Marina A

    2013-06-01

    Nanoparticle interactions with the blood coagulation system can be beneficial or adverse depending on the intended use of a nanomaterial. Nanoparticles can be engineered to be procoagulant or to carry coagulation-initiating factors to treat certain disorders. Likewise, they can be designed to be anticoagulant or to carry anticoagulant drugs to intervene in other pathological conditions in which coagulation is a concern. An overview of the coagulation system was given and a discussion of a desirable interface between this system and engineered nanomaterials was assessed in part I, which was published in the May 2013 issue of Nanomedicine. Unwanted pro- and anti-coagulant properties of nanoparticles represent significant concerns in the field of nanomedicine, and often hamper the development and transition into the clinic of many promising engineered nanocarriers. This part will focus on the undesirable effects of engineered nanomaterials on the blood coagulation system. We will discuss the relationship between the physicochemical properties of nanoparticles (e.g., size, charge and hydrophobicity) that determine their negative effects on the blood coagulation system in order to understand how manipulation of these properties can help to overcome unwanted side effects.

  3. The year's new drugs & biologics 2014 - Part II: trends & challenges.

    PubMed

    Graul, A I; Serebrov, M; Cruces, E; Tracy, M; Dulsat, C

    2015-02-01

    2014 was a year of continued high activity in the pharma and biotech industry, as evidenced in part I of this annual two-part review article published last month in this journal (1). As of December 23, 2014, a total of 55 new chemical and biological entities had reached their first markets worldwide, together with another 29 important new line extensions. Another 19 products were approved for the first time during the year but not yet launched by December 23. Furthermore, during the now-traditional year-end sprint, several regulatory agencies issued last-minute approvals for other compounds that missed the deadline for inclusion in that article, bringing the total of new approvals for the year to a somewhat higher number. In addition to the successful development, registration and launch of new drugs and biologics, there are various other trends and tendencies that serve as indicators of the overall health and status of the industry. These include the pursuit of novel programs designed by regulators to stimulate the development of drugs for diseases that are currently under-treated; the regular and pragmatic culling by companies of their R&D pipelines; and the decision to unify pipelines, portfolios and sales forces through mergers and acquisitions.

  4. Solar System: Surfing the Edge of Chaos Part II

    NASA Astrophysics Data System (ADS)

    Hayes, Wayne B.; Danforth, C. M.

    2008-05-01

    The orbital positions and masses of the Jovian planets are known only to a few parts in 107. At the 2006 DDA meeting in Halifax, I presented results, recently published in Nature Physics and MNRAS, which demonstrated the existence of both chaotic and near-regular orbits within the current observational error volume. In this talk, joint work with Chris Danforth of the University of Vermont, we present results demonstrating extremely rich structure of Lyapunov times within the uncertainty volume across many two-dimensional slices through initial-condition space. These slices include the Cartesian product of every pair of orbital semi-major axes ap, plus Cartesian products between ap and eccentricity ep for each Jovian planet p. Some of the observed structure is reminiscent of Guzzo's "Web of 3-body resonances", although it is not clear that 3-body resonances are the cause in this case since the structure extends several orders of magnitude below the scale at which Murray + Holman's 3-body resonance theory has been explored. Some of the structure is entirely unlike that seen in Guzzo's Web, and may require further theoretical development to understand. Finally, several "zoom-in” plots, reminiscent of those done for the Mandelbrot set, demonstrate that the structure continues down, at least, to scales of about one part in 109. In all cases, we verify the reliability of our integrations using convergence tests to demonstrate that the picture does not change even when the integration timestep is decreased significantly.

  5. Collagenolytic (necrobiotic) granulomas: part II--the 'red' granulomas.

    PubMed

    Lynch, Jane M; Barrett, Terry L

    2004-07-01

    A collagenolytic or necrobiotic non-infectious granuloma is one in which a granulomatous infiltrate develops around a central area of altered collagen and elastic fibers. The altered fibers lose their distinct boundaries and exhibit new staining patterns, becoming either more basophilic or eosinophilic. Within the area of altered collagen, there may be deposition of acellular substances such as mucin (blue) or fibrin (red), or there may be neutrophils with nuclear dust (blue), eosinophils (red), or flame figures (red). These color distinctions can be used as a simple algorithm for the diagnosis of collagenolytic granulomas, i.e. 'blue' granulomas vs. 'red' granulomas. Eight diagnoses are included within these two groupings, which are discussed in this two-part article. In the previously published first part, the clinical presentation, pathogenesis and histologic features of the 'blue' collagenolytic granulomas were discussed. These are the lesions of granuloma annulare, Wegener's granulomatosis, and rheumatoid vasculitis. In this second half of the series, the 'red' collagenolytic granulomas are discussed; these are the lesions of necrobiosis lipoidica, necrobiotic xanthogranuloma, rheumatoid nodules, Churg-Strauss syndrome, and eosinophilic cellulitis (Well's Syndrome).

  6. Active flow control for a NACA-0012 Profile: Part II

    NASA Astrophysics Data System (ADS)

    Oualli, H.; Makadem, M.; Ouchene, H.; Ferfouri, A.; Bouabdallah, A.; Gad-El-Hak, M.

    2016-11-01

    Active flow control is applied to a NACA-0012 profile. The experiments are conducted in a wind tunnel. Using a high-resolution visible-light camera and tomography, flow visualizations are carried out. LES finite-volume 3D code is used to complement the physical experiments. The symmetric wing is clipped into two parts, and those parts extend and retract along the chord according to the same sinusoidal law we optimized last year for the same profile but clipped at an angle of 60 deg, instead of the original 90 deg. The Reynolds number range is extended to 500,000, thus covering the flying regimes of micro-UAVs, UAVs, as well as small aircraft. When the nascent cavity is open and the attack angle is 30 deg, the drag coefficient is increased by 1,300%, as compared to the uncontrolled case. However, when the cavity is covered and Re <=105 , a relatively small frequency, f <= 30 Hz, is required for the drag coefficient to drop to negative values. At the maximum Reynolds number, thrust is generated but only at much higher frequencies, 12 <= f <= 16 kHz.

  7. Histologic features of alopecias: part II: scarring alopecias.

    PubMed

    Bernárdez, C; Molina-Ruiz, A M; Requena, L

    2015-05-01

    The diagnosis of disorders of the hair and scalp can generally be made on clinical grounds, but clinical signs are not always diagnostic and in some cases more invasive techniques, such as a biopsy, may be necessary. This 2-part article is a detailed review of the histologic features of the main types of alopecia based on the traditional classification of these disorders into 2 major groups: scarring and nonscarring alopecias. Scarring alopecias are disorders in which the hair follicle is replaced by fibrous scar tissue, a process that leads to permanent hair loss. In nonscarring alopecias, the follicles are preserved and hair growth can resume when the cause of the problem is eliminated. In the second part of this review, we describe the histologic features of the main forms of scarring alopecia. Since a close clinical-pathological correlation is essential for making a correct histopathologic diagnosis of alopecia, we also include a brief description of the clinical features of the principal forms of this disorder.

  8. Fibre reinforced composite dental bridge. Part II: Numerical investigation.

    PubMed

    Li, W; Swain, M V; Li, Q; Ironside, J; Steven, G P

    2004-09-01

    Motivated by the clinical success and limitations on experimental investigation of the fibre-reinforced composite dental bridge, this paper aims at providing a numerical investigation into the bridge structure. The finite element (FE) model adopted here is constructed from computer tomography images of a physical bridge specimen. The stress and strain distributions in the bridge structure especially in the bonding interfaces are analyzed in detail. The peak stresses and their variations with the different bridge designs are evaluated. Due to the lower bond strengths of adhesives and the high stress concentration in the pontic-abutment interface, the likelihood of failure in the interface is predicted by finite element analysis. The validity of the numerical results is established by a good agreement between the FE prediction and the tests in the load-deflection responses, the structural stiffness as well as the failure location of the composite dental bridge.

  9. Supercurrent in the quantum Hall regime, part II

    NASA Astrophysics Data System (ADS)

    Amet, Francois; Ke, Chung Ting; Borzenets, Ivan; Wang, Jiyingmei; Watanabe, Kenji; Taniguchi, Takashi; Deacon, Russel; Yamamoto, Michihisa; Bomze, Yuriy; Tarucha, Seigo; Finkelstein, Gleb

    A novel promising route for creating topological states and excitations is to combine superconductivity and the quantum Hall effect. Despite this potential, signatures of superconductivity in the quantum Hall regime remain scarce, and a superconducting current through a Landau-quantized two-dimensional electron gas has so far eluded experimental observation. High-mobility graphene/BN heterostructures exhibit the quantum Hall effect at relatively low field and are therefore particularly suitable to study the fate of the Josephson effect in that regime. Here, we report the observation of a superconducting current through graphene at fields as high as 2 Tesla. In that regime, the normal-state resistance is quantized but pockets of superconductivity still persist at small current bias. We will describe their bias and temperature dependence. Magnetic field interference patterns in the supercurrent inform on possible mechanisms mediating this supercurrent.

  10. Elastodynamic analysis of a gear pump. Part II: Meshing phenomena and simulation results

    NASA Astrophysics Data System (ADS)

    Mucchi, E.; Dalpiaz, G.; Rivola, A.

    2010-10-01

    A non-linear lumped kineto-elastodynamic model for the prediction of the dynamic behaviour of external gear pumps is presented. It takes into account the most important phenomena involved in the operation of this kind of machines. Two main sources of noise and vibration can be considered: pressure and gear meshing. Fluid pressure distribution on gears, which is time-varying, is computed and included as a resultant external force and torque acting on the gears. Parametric excitations due to time-varying meshing stiffness, the tooth profile errors (obtained by a metrological analysis), the backlash effects between meshing teeth, the lubricant squeeze and the possibility of tooth contact on both lines of action were also included. Finally, the torsional stiffness and damping of the driving shaft and the non-linear behaviour of the hydrodynamic journal bearings were also taken into account. Model validation was carried out on the basis of experimental data concerning case accelerations and force reactions. The model can be used in order to analyse the pump dynamic behaviour and to identify the effects of modifications in design and operation parameters, in terms of vibration and dynamic forces. Part I is devoted to the calculation of the gear eccentricity in the steady-state condition as result of the balancing between mean pressure loads, mean meshing force and bearing reactions, while in Part II the meshing phenomena are fully explained and the main simulation results are presented.

  11. Cervical spondylotic myelopathy: Part II: clinical and imaging considerations *

    PubMed Central

    Burns, SH; O’Connor, SM; Mior, SA

    1991-01-01

    In this, the second of a two part series, we continue to review the recent literature pertaining to cervical spondylotic myelopathy (CSM). Caused by the compromise of the spinal canal resulting from the superimposition of spondylotic changes upon a congenitally narrowed canal, CSM has a predictable radiographic and clinical presentation. The clinical presentation frequently includes both upper and lower motor neuron signs and symptoms. Careful analysis of the plain film images usually reveals a spinal canal measuring 12 mm or less. Additional imaging modalities confirm the diagnosis. This paper presents the clinical and imaging characteristics underlying CSM and stresses the importance of including CSM in the differential diagnosis of patients complaining of neck and leg dysfunctions. ImagesFigure 1Figure 2Figure 3Figure 4

  12. Planar LTCC transformers for high voltage flyback converters: Part II.

    SciTech Connect

    Schofield, Daryl; Schare, Joshua M., Ph.D.; Slama, George; Abel, David

    2009-02-01

    This paper is a continuation of the work presented in SAND2007-2591 'Planar LTCC Transformers for High Voltage Flyback Converters'. The designs in that SAND report were all based on a ferrite tape/dielectric paste system originally developed by NASCENTechnoloy, Inc, who collaborated in the design and manufacturing of the planar LTCC flyback converters. The output/volume requirements were targeted to DoD application for hard target/mini fuzing at around 1500 V for reasonable primary peak currents. High voltages could be obtained but with considerable higher current. Work had begun on higher voltage systems and is where this report begins. Limits in material properties and processing capabilities show that the state-of-the-art has limited our practical output voltage from such a small part volume. In other words, the technology is currently limited within the allowable funding and interest.

  13. Electron scattering by molecules. II - Experimental methods and data

    NASA Technical Reports Server (NTRS)

    Trajmar, S.; Chutjian, A.; Register, D. F.

    1983-01-01

    Experimental techniques for measuring electron-molecule collision cross sections are briefly summarized. A survey of the available experimental cross section data is presented. The emphasis here is on elastic scattering, rotational, vibrational and electronic excitations, total electron scattering, and momentum transfer in the few eV to few hundred eV impact energy range. Reference is made to works concerned with high energy electron scattering, innershell and multi-electron excitations, conicidence methods and electron scattering in laser fields.

  14. Medical Education: Barefoot Doctors, Health Care, Health Education, Nursing Education, Pharmacy Education, Part II.

    ERIC Educational Resources Information Center

    Parker, Franklin

    1987-01-01

    This is Part II of a two-part annotated bibliography of selected references on medical education in the People's Republic of China. The references date from 1913 to 1982. Most of the references are from the 1960's and 1970's. (RH)

  15. An Occupation and Participation Approach to Reading Intervention (OPARI) Part II: Pilot Clinical Application

    ERIC Educational Resources Information Center

    Grajo, Lenin C.; Candler, Catherine

    2016-01-01

    The Occupation and Participation Approach to Reading Intervention (OPARI) is an intervention approach for children with reading difficulties that emphasizes reading as an important occupation of children. Part I presented the theoretical basis of the OPARI. Part II describes a pilot clinical application of the OPARI. Guided by Schkade and…

  16. MONGOLS OF THE TWENTIETH CENTURY, PART II. URALIC AND ALTAIC SERIES, VOLUME 37, PART 2.

    ERIC Educational Resources Information Center

    RUPEN, ROBERT A.

    THIS BIBLIOGRAPHY DIRECTLY SUPPLEMENTS AND IS INTENDED AS AN INTEGRAL PART OF "MONGOLS OF THE TWENTIETH CENTURY, PART I." THE RANGE OF SUBJECT MATTER, HOWEVER, GOES FAR BEYOND THE SPECIFIC CONCERNS OF THE FIRST VOLUME, COVERING GENERAL AND SPECIFIC BIBLIOGRAPHIES, UNSIGNED REPORTS AND DOCUMENTS, ENCYCLOPEDIAS, OFFICIAL HISTORIES,…

  17. Operational Control Procedures for the Activated Sludge Process, Part I - Observations, Part II - Control Tests.

    ERIC Educational Resources Information Center

    West, Alfred W.

    This is the first in a series of documents developed by the National Training and Operational Technology Center describing operational control procedures for the activated sludge process used in wastewater treatment. Part I of this document deals with physical observations which should be performed during each routine control test. Part II…

  18. Simulation of Slag Freeze Layer Formation: Part II: Numerical Model

    NASA Astrophysics Data System (ADS)

    Guevara, Fernando J.; Irons, Gordon A.

    2011-08-01

    The experiments from Part I with CaCl2-H2O solidification in a differentially heated, square cavity were simulated in two dimensions using a control volume technique in a fixed grid. The test conditions and physical properties of the fluid resulted in Prandtl and Rayleigh numbers in the range of 50 and 2.1 × 108, respectively, and the solidification was observed to be planar with dispersed solid particles. In the mathematical model, temperature-dependent viscosity and density functions were employed. To suppress velocities in the solid phase, various models were tested, and a high effective viscosity was found most appropriate. The results compare well with the experiments in terms of solid layer growth, horizontal and vertical velocities, heat transfer coefficients, and temperature distributions. Hydrodynamic boundary layers on the solidified front and on the hot vertical wall tend to be nonsymmetric, as well on the top and bottom adiabatic walls. The high viscosity value imposed on the two-phase zone affects the velocity profile close to the solid front and modifies the heat transfer rate.

  19. Medicine at the crossroads. Part II. Summary of completed project

    SciTech Connect

    1998-05-01

    Medicine at the crossroads (a.k.a. The Future of Medicine) is an 8-part series of one-hour documentaries which examines the scientific and social forces that have shaped the practice of medicine around the world. The series was developed and produced over a five-year period and in eleven countries. Among the major issues examined in the series are the education of medical practitioners and the communication of medical issues. The series also considers the dilemmas of modern medicine, including the treatment of the elderly and the dying, the myth of the quick fix in the face of chronic and incurable diseases such as HIV, and the far-reaching implications of genetic treatments. Finally, the series examines the global progress made in medical research and application, as well as the questions remaining to be answered. These include not only scientific treatment, but accessibility and other critical topics affecting the overall success of medical advances. Medicine at the crossroads is a co-production of Thirteen/WNET and BBC-TV in association with Television Espafiola SA (RTVE) and the Australian Broadcasting Corporation. Stefan Moore of Thirteen/WNET and Martin Freeth of BBC-TV are series producers. George Page is executive in charge of medicine at the crossroads. A list of scholarly advisors and a program synopses is attached.

  20. Imaging of juvenile idiopathic arthritis. Part II: Ultrasonography and MRI

    PubMed Central

    Grochowska, Elżbieta; Gietka, Piotr; Płaza, Mateusz; Pracoń, Grzegorz; Saied, Fadhil; Walentowska-Janowicz, Marta

    2016-01-01

    Juvenile idiopathic arthritis is the most common autoimmune systemic disease of the connective tissue affecting individuals in the developmental age. Radiography, which was described in the first part of this publication, is the standard modality in the assessment of this condition. Ultrasound and magnetic resonance imaging enable early detection of the disease which affects soft tissues, as well as bones. Ultrasound assessment involves: joint cavities, tendon sheaths and bursae for the presence of synovitis, intraand extraarticular fat tissue to visualize signs of inflammation, hyaline cartilage, cartilaginous epiphysis and subchondral bone to detect cysts and erosions, and ligaments, tendons and their entheses for signs of enthesopathies and tendinopathies. Magnetic resonance imaging is indicated in children with juvenile idiopathic arthritis for assessment of inflammation in peripheral joints, tendon sheaths and bursae, bone marrow involvement and identification of inflammatory lesions in whole-body MRI, particularly when the clinical picture is unclear. Also, MRI of the spine and spinal cord is used in order to diagnose synovial joint inflammation, bone marrow edema and spondylodiscitis as well as to assess their activity, location, and complications (spinal canal stenosis, subluxation, e.g. in the atlantoaxial region). This article discusses typical pathological changes seen on ultrasound and magnetic resonance imaging. The role of these two methods for disease monitoring, its identification in the pre-clinical stage and establishing its remission are also highlighted. PMID:27679727

  1. Eponyms in cardiothoracic radiology--part II: vascular.

    PubMed

    Mohammed, Tan-Lucien H; Saettele, Megan R; Saettele, Timothy; Patel, Vikas; Kanne, Jeffrey P

    2014-01-01

    Eponyms serve the purpose of honoring individuals who have made important observations and discoveries. As with other fields of medicine, eponyms are frequently encountered in radiology, particularly in chest radiology. However, inappropriate use of an eponym may lead to potentially dangerous miscommunication. Moreover, an eponym may honor the incorrect person or a person who falls into disrepute. Despite their limitations, eponyms are still widespread in the medical literature. Furthermore, in some circumstances, more than one individual may have contributed to the description or discovery of a particular anatomical structure or disease, whereas in others, an eponym may have been incorrectly applied initially and propagated for years in the medical literature. Nevertheless, radiologic eponyms are a means of honoring those who have made lasting contributions to the field of radiology, and familiarity with these eponyms is critical for proper reporting and accurate communication. In addition, the acquisition of some historical knowledge about those whose names are associated with various structures or pathologic conditions conveys a sense of humanity in the science of medicine. In this second part of a multipart series, the authors discuss a number of chest radiology eponyms as they relate to the pulmonary vasculature, including relevant clinical and imaging features, as well biographic information of the respective eponym׳s namesake.

  2. Multiscale modeling, simulations, and experiments of coating growth on nanofibers. Part II. Deposition

    SciTech Connect

    Buldum, A.; Clemons, C.B.; Dill, L.H.; Kreider, K.L.; Young, G.W.; Zheng, X.; Evans, E.A.; Zhang, G.; Hariharan, S.I.

    2005-08-15

    This work is Part II of an integrated experimental/modeling investigation of a procedure to coat nanofibers and core-clad nanostructures with thin-film materials using plasma-enhanced physical vapor deposition. In the experimental effort, electrospun polymer nanofibers are coated with aluminum materials under different operating conditions to observe changes in the coating morphology. This procedure begins with the sputtering of the coating material from a target. Part I [J. Appl. Phys. 98, 044303 (2005)] focused on the sputtering aspect and transport of the sputtered material through the reactor. That reactor level model determines the concentration field of the coating material. This field serves as input into the present species transport and deposition model for the region surrounding an individual nanofiber. The interrelationships among processing factors for the transport and deposition are investigated here from a detailed modeling approach that includes the salient physical and chemical phenomena. Solution strategies that couple continuum and atomistic models are used. At the continuum scale, transport dynamics near the nanofiber are described. At the atomic level, molecular dynamics (MD) simulations are used to study the deposition and sputtering mechanisms at the coating surface. Ion kinetic energies and fluxes are passed from the continuum sheath model to the MD simulations. These simulations calculate sputtering and sticking probabilities that in turn are used to calculate parameters for the continuum transport model. The continuum transport model leads to the definition of an evolution equation for the coating-free surface. This equation is solved using boundary perturbation and level set methods to determine the coating morphology as a function of operating conditions.

  3. Part I: Microscopic description of liquid He II. Part II: Uniformly approximated WKB method as used for the calculation of phase shifts in heavy-ion collision problems

    SciTech Connect

    Suebka, P.

    1984-01-01

    In Part I, the excitation spectrum of liquid He II is obtained using the two-body potential consists of a hardcore potential plus an outside attractive potential. The sum of two gaussian potential of Khanna and Das which is similar to the Lennard-Jones potential is chosen as the attractive potential. The t-matrix method due to Brueckner and Sawada is adopted with modifications to replace the interaction potential. The spectrum gives the phonon branch and the roton dip which resemble the excitation spectrum for liquid He II. The temperature dependence of the excitation spectrum enters into calculation through the zero-momentum state occupation number. A better approximation of thermodynamic functions is obtained by extending Landau's theory to the situation where the excitation is a function of temperature as well as of momentum. Our thermodynamic calculations also bear qualitative agreement with measurements on He II as expected.

  4. Why does Bangladesh remain so poor? Part II: eight answers.

    PubMed

    Maloney, C

    1985-01-01

    Bangladeshis of varying background all over the country were asked why they think poverty persists to such an extent in Bangladesh. Their answers provide a new perspective on the situation. The initial response often blames outside and natural causes -- floods, droughts, lack of resources, low demand for the country's exports, or historic exploitation. It is true that Bangladesh has virtually no mineral resources except gas. Yet, the soil, water, and human labor add up to a huge potential. The Third Five Year Plan emphasizes use of the soil, irrigation, tanks, rivers, and human labor. These provide the only hope for reducing poverty a little during the next 5 years. Bangladeshis as well as foreign observers most commonly cite overpopulation as the cause of poverty. Population growth is a cause of present poverty in Bangladesh but is not the only cause of poverty. The Third Five Year Plan goal to reduce annual growth to 1.8% is ambitious, but even if it is achieved the population will double in a few decades. As it would most likely be impossible for Bangladesh to support such numbers and maintain political and economic stability, such growth will have to be prevented. Poverty in Bangladesh is party a result of the long history of low urbanization, weak institutions, spotty and inadequate physical infrastructure, and insufficient entrapreneurship. Other reasons cited as causes of persisting poverty include illiteracy, idleness, class exploitation, the selfishness of individuals, and a lack of trust among people. All of the efforts of the poor themselves, various agencies, and the government, as examined in the 1st part of this discussion, fail to indicate any reason to hope that poverty in Bangladesh can be dramatically reduced any time soon. The Third Five Year Plan foresees a possible reduction of the number of those in poverty by 10%. According to the Plan itself, those in or near poverty comprise 85% of the people. The conditions under which the people of some

  5. Neuromorphic meets neuromechanics, part II: the role of fusimotor drive

    NASA Astrophysics Data System (ADS)

    Jalaleddini, Kian; Minos Niu, Chuanxin; Chakravarthi Raja, Suraj; Sohn, Won Joon; Loeb, Gerald E.; Sanger, Terence D.; Valero-Cuevas, Francisco J.

    2017-04-01

    Objective. We studied the fundamentals of muscle afferentation by building a Neuro–mechano–morphic system actuating a cadaveric finger. This system is a faithful implementation of the stretch reflex circuitry. It allowed the systematic exploration of the effects of different fusimotor drives to the muscle spindle on the closed-loop stretch reflex response. Approach. As in Part I of this work, sensory neurons conveyed proprioceptive information from muscle spindles (with static and dynamic fusimotor drive) to populations of α-motor neurons (with recruitment and rate coding properties). The motor commands were transformed into tendon forces by a Hill-type muscle model (with activation-contraction dynamics) via brushless DC motors. Two independent afferented muscles emulated the forces of flexor digitorum profundus and the extensor indicis proprius muscles, forming an antagonist pair at the metacarpophalangeal joint of a cadaveric index finger. We measured the physical response to repetitions of bi-directional ramp-and-hold rotational perturbations for 81 combinations of static and dynamic fusimotor drives, across four ramp velocities, and three levels of constant cortical drive to the α-motor neuron pool. Main results. We found that this system produced responses compatible with the physiological literature. Fusimotor and cortical drives had nonlinear effects on the reflex forces. In particular, only cortical drive affected the sensitivity of reflex forces to static fusimotor drive. In contrast, both static fusimotor and cortical drives reduced the sensitivity to dynamic fusimotor drive. Interestingly, realistic signal-dependent motor noise emerged naturally in our system without having been explicitly modeled. Significance. We demonstrate that these fundamental features of spinal afferentation sufficed to produce muscle function. As such, our Neuro–mechano–morphic system is a viable platform to study the spinal mechanisms for healthy muscle function

  6. Stress analysis in oral obturator prostheses, part II: photoelastic imaging

    NASA Astrophysics Data System (ADS)

    Pesqueira, Aldiéris Alves; Goiato, Marcelo Coelho; da Silva, Emily Vivianne Freitas; Haddad, Marcela Filié; Moreno, Amália; Zahoui, Abbas; dos Santos, Daniela Micheline

    2014-06-01

    In part I of the study, two attachment systems [O-ring; bar-clip (BC)] were used, and the system with three individualized O-rings provided the lowest stress on the implants and the support tissues. Therefore, the aim of this study was to assess the stress distribution, through the photoelastic method, on implant-retained palatal obturator prostheses associated with different attachment systems: BOC-splinted implants with a bar connected to two centrally placed O-rings, and BOD-splinted implants with a BC connected to two distally placed O-rings (cantilever). One photoelastic model of the maxilla with oral-sinus-nasal communication with three parallel implants was fabricated. Afterward, two implant-retained palatal obturator prostheses with the two attachment systems described above were constructed. Each assembly was positioned in a circular polariscope and a 100-N axial load was applied in three different regions with implants by using a universal testing machine. The results were obtained through photograph record analysis of stress. The BOD system exhibited the highest stress concentration, followed by the BOC system. The O-ring, centrally placed on the bar, allows higher mobility of the prostheses and homogeneously distributes the stress to the region of the alveolar ridge and implants. It can be concluded that the use of implants with O-rings, isolated or connected with a bar, to rehabilitate maxillectomized patients allows higher prosthesis mobility and homogeneously distributes the stress to the alveolar ridge region, which may result in greater chewing stress distribution to implants and bone tissue. The clinical implication of the augmented bone support loss after maxillectomy is the increase of stress in the attachment systems and, consequently, a higher tendency for displacement of the prosthesis.

  7. Is extreme learning machine feasible? A theoretical assessment (part II).

    PubMed

    Lin, Shaobo; Liu, Xia; Fang, Jian; Xu, Zongben

    2015-01-01

    An extreme learning machine (ELM) can be regarded as a two-stage feed-forward neural network (FNN) learning system that randomly assigns the connections with and within hidden neurons in the first stage and tunes the connections with output neurons in the second stage. Therefore, ELM training is essentially a linear learning problem, which significantly reduces the computational burden. Numerous applications show that such a computation burden reduction does not degrade the generalization capability. It has, however, been open that whether this is true in theory. The aim of this paper is to study the theoretical feasibility of ELM by analyzing the pros and cons of ELM. In the previous part of this topic, we pointed out that via appropriately selected activation functions, ELM does not degrade the generalization capability in the sense of expectation. In this paper, we launch the study in a different direction and show that the randomness of ELM also leads to certain negative consequences. On one hand, we find that the randomness causes an additional uncertainty problem of ELM, both in approximation and learning. On the other hand, we theoretically justify that there also exist activation functions such that the corresponding ELM degrades the generalization capability. In particular, we prove that the generalization capability of ELM with Gaussian kernel is essentially worse than that of FNN with Gaussian kernel. To facilitate the use of ELM, we also provide a remedy to such a degradation. We find that the well-developed coefficient regularization technique can essentially improve the generalization capability. The obtained results reveal the essential characteristic of ELM in a certain sense and give theoretical guidance concerning how to use ELM.

  8. The intra-uterine device. Part II: technical problems.

    PubMed

    Alexander, I

    1980-10-01

    In discussing the technical problems associated with the IUD, focus is on the basic insertion technique, the technique to use with the various IUDs (Copper 7, Lippes Loop, Copper T models, the Saf-T-coil, and the multiload 250), the timing of the insertion, and removal of the IUD. Bimanual examination of the pelvis must be performed before an IUD is inserted. Prior to starting the insertion, the patient should be given an explanation of what is to be done. As patients are unfamiliar with the appearance of most of the instruments, it is advisable to keep them from view. Having visualized the cervix and fixed the blades of the Cusco speculum in the open position, the cervix can be seized with a single toothed tenaculum or 7 inch Allis forceps. It is generally necessary to steady the cervix with a forcep as it straightens out the canal and uterine flexion. Sounding the uterine cavity will reveal its length and confirm any angulation. On occasion it is impossible to sound the cavity because the internal os is too tight or the endocervical canal has a pinhole external os. Force should be avoided. High fundal placement without perforating the uterus is the objective when inserting any IUD, and this is particularly important with the copper IUDs which depend on a close association of their copper elements to the endometrium. Generally, it is easier to insert a coil towards the end of the period when the cervix is partly dilated and any bleeding that occurs is masked. Insertion following abortion is commonly performed, and encouraging results have been achieved with insertions immediately postpartum. Removal can be done at any time.

  9. Overactive bladder – 18 years – Part II

    PubMed Central

    Truzzi, Jose Carlos; Gomes, Cristiano Mendes; Bezerra, Carlos A.; Plata, Ivan Mauricio; Campos, Jose; Garrido, Gustavo Luis; Almeida, Fernando G.; Averbeck, Marcio Augusto; Fornari, Alexandre; Salazar, Anibal; Dell’Oro, Arturo; Cintra, Caio; Sacomani, Carlos Alberto Ricetto; Tapia, Juan Pablo; Brambila, Eduardo; Longo, Emilio Miguel; Rocha, Flavio Trigo; Coutinho, Francisco; Favre, Gabriel; Garcia, José Antonio; Castaño, Juan; Reyes, Miguel; Leyton, Rodrigo Eugenio; Ferreira, Ruiter Silva; Duran, Sergio; López, Vanda; Reges, Ricardo

    2016-01-01

    ABSTRACT Traditionally, the treatment of overactive bladder syndrome has been based on the use of oral medications with the purpose of reestablishing the detrusor stability. The recent better understanding of the urothelial physiology fostered conceptual changes, and the oral anticholinergics – pillars of the overactive bladder pharmacotherapy – started to be not only recognized for their properties of inhibiting the detrusor contractile activity, but also their action on the bladder afference, and therefore, on the reduction of the symptoms that constitute the syndrome. Beta-adrenergic agonists, which were recently added to the list of drugs for the treatment of overactive bladder, still wait for a definitive positioning – as either a second-line therapy or an adjuvant to oral anticholinergics. Conservative treatment failure, whether due to unsatisfactory results or the presence of adverse side effects, define it as refractory overactive bladder. In this context, the intravesical injection of botulinum toxin type A emerged as an effective option for the existing gap between the primary measures and more complex procedures such as bladder augmentation. Sacral neuromodulation, described three decades ago, had its indication reinforced in this overactive bladder era. Likewise, the electric stimulation of the tibial nerve is now a minimally invasive alternative to treat those with refractory overactive bladder. The results of the systematic literature review on the oral pharmacological treatment and the treatment of refractory overactive bladder gave rise to this second part of the review article Overactive Bladder – 18 years, prepared during the 1st Latin-American Consultation on Overactive Bladder. PMID:27176185

  10. Death: A Part of Life. An Experimental Unit.

    ERIC Educational Resources Information Center

    Otero, George G.

    This experimental unit on death employs a cross-cultural comparison of death and burial customs to increase student understanding of the values and reasons behind events surrounding the end of the life cycle. Nine activities are presented in which students collect, label, analyze, and generalize about the relationship of death customs to the…

  11. Addressing future challenges for cancer services: part II.

    PubMed

    Maher, Jane; Radford, Gina

    2016-02-01

    Jane Maher & Gina Radford speak to Gemma Westcott, Commissioning Editor Jane Maher has been Macmillan's Chief Medical Officer since 1999 and now shares the role as Joint Chief Medical Officer with general practitioner Rosie Loftus, reflecting the growing need for specialists and generalists to work more effectively together. She has been an National Health Service (NHS) improvement clinical leader for over 10 years and is a Consultant Clinical Oncologist at Mount Vernon Cancer Centre and Hillingdon Hospital where she has worked for more than 20 years, during which she helped develop nonsurgical oncology services in five district general hospitals. She is a senior Clinical Lecturer at University College London and Visiting Professor in Cancer and Supportive Care at the Centre for Complexity Management at the University of Hertfordshire. Jane chaired the Maher Committee for the Department of Health in 1995, led the UK National Audit of Late Effects Pelvic Radiotherapy for the Royal College of Radiologists (RCR) in 2000 and, most recently, chaired the National Cancer Survivorship Initiative Consequences of Treatment work stream. She co-founded one of the first Cancer Support and Information services in the UK, winning the Nye Bevan award in 1992 and there are now more than 60 units based on this model. She is a member of the Older People and Cancer Clinical Advisory Group. She has written more than 100 published articles and is a UK representative for cancer survivorship in Europe and advises on cancer survivorship programs in Denmark and Canada. Gina Radford is Deputy Chief Medical Officer for England, a post she took up in January 2015. Prior to that, she has held a number of roles in public health, at local and regional level. Most recently she was Centre Director for Anglia and Essex for Public Health England, and as a part of that role helped lead nationally on the public health response to Ebola. She was until very recently Chair of one of the NICE public health

  12. Implementing a predictive modeling program, part II: Use of motivational interviewing in a predictive modeling program.

    PubMed

    Calhoun, Jean; Admire, Kaye S

    2005-01-01

    This is the second article of a two-part series about issues encountered in implementing a predictive modeling program. Part I looked at how to effectively implement a program and discussed helpful hints and lessons learned for case managers who are required to change their approach to patients. In Part II, we discuss the readiness to change model, examine the spirit of motivational interviewing and related techniques, and explore how motivational interviewing is different from more traditional interviewing and assessment methods.

  13. Guidelines for clinical engineering programs--Part I: guidelines for electrical isolation; Part II: performance evaluation of clinical engineering programs.

    PubMed

    Ridgway, M

    1980-01-01

    This series presents guidelines for: electrically isolated inputs and outputs; measuring the performance of hospital biomedical engineering programs; evaluating the risk of electric shock in hospitals; and for isolated power in anesthetizing locations. In Part I, specific recommendations are given for the use of insulated approach, battery-powered monitors in surgery, and for isolation requirements for devices connected to cardiac leads. In Part II, checklists are provided for the self-evaluation of an in-house, biomedical engineering staff. Parts III and IV, in future issues of this Journal, will include discussion of the theoretical electrical hazard potential in reference to the use of isolated power systems. The question of whether isolated power should be required in all anesthetizing locations will be discussed in Part IV.

  14. Synchrotron X-ray CT characterization of titanium parts fabricated by additive manufacturing. Part II. Defects.

    PubMed

    Scarlett, Nicola Vivienne Yorke; Tyson, Peter; Fraser, Darren; Mayo, Sheridan; Maksimenko, Anton

    2016-07-01

    Synchrotron X-ray tomography (SXRT) has been applied to the study of defects within three-dimensional printed titanium parts. These parts were made using the Arcam EBM(®) (electron beam melting) process which uses powdered titanium alloy, Ti64 (Ti alloy with approximately 6%Al and 4%V) as the feed and an electron beam for the sintering/welding. The experiment was conducted on the Imaging and Medical Beamline of the Australian Synchrotron. The samples represent a selection of complex shapes with a variety of internal morphologies. Inspection via SXRT has revealed a number of defects which may not otherwise have been seen. The location and nature of such defects combined with detailed knowledge of the process conditions can contribute to understanding the interplay between design and manufacturing strategy. This fundamental understanding may subsequently be incorporated into process modelling, prediction of properties and the development of robust methodologies for the production of defect-free parts.

  15. The Cu-Sn phase diagram, Part I: New experimental results.

    PubMed

    Fürtauer, S; Li, D; Cupid, D; Flandorfer, H

    2013-03-01

    Phase diagram investigation of the Cu-Sn system was carried out on twenty Cu-rich samples by thermal analysis (DTA), metallographic methods (EPMA/SEM-EDX) and crystallographic analysis (powder XRD, high temperature powder XRD). One main issue in this work was to investigate the high temperature phases beta (W-type) and gamma (BiF3-type) and to check the phase relations between them. In the high temperature powder XRD experiments the presence of the two-phase-field between the beta- and the gamma-phase could not be confirmed. Detailed study of primary literature together with our experimental results leads to a new phase diagram version with a higher order transformation between these two high temperature phases. The present work is designated as part I of our joint publication. The new findings described here have been included into a completely new thermodynamic assessment of the Cu-Sn phase diagram which is presented in part II.

  16. Ontario Universities Benefits Survey, 1993-94, Part I, Benefits Excluding Pensions [and] Part II: Pensions.

    ERIC Educational Resources Information Center

    Council of Senior Administrative Officers--Universities of Ontario, Toronto.

    This report presents data from a survey of Ontario (Canada) universities concerning employment benefits offered in 1993-94. Part I covers benefits other than pensions. Tables display the information on particular benefits institution-by-institution including: administration and insurance plans, communication of benefits, proposed changes,…

  17. Ontario Universities Benefits Survey 1994-96. Part I: Benefits Excluding Pensions [and] Part II: Pensions.

    ERIC Educational Resources Information Center

    Council of Ontario Universities, Toronto.

    This report presents data from a survey of Ontario (Canada) universities concerning employment benefits offered in 1994-96. Part 1 covers benefits other than pensions. Tables display the information on particular benefits institution-by-institution including: administration and insurance plans, communication of benefits, proposed changes, life and…

  18. The Didactics of Biology. A Selected Bibliography for 1979. Part I [and] Part II.

    ERIC Educational Resources Information Center

    Altmann, Antonin, Ed.; Lipertova, Pavla, Ed.

    Selected articles on various aspects of biology teaching published in 1979 have been annotated in this two-part bibliography. Entries from 18 journals representing 11 different countries are presented according to a topic area classification scheme listed in the table of contents. Countries represented include: Australia; Bulgaria; Czechoslovakia;…

  19. Research and Development: A Complex Relationship Part I [and] Part II.

    ERIC Educational Resources Information Center

    Pollard, John Douglas Edward

    Part 1 of this document describes the background, format, and early groundwork that went into the development of a test sponsored entirely by private enterprise. The discipline imposed by a financial bottom line imposes special pressures but also offers new opportunities. This private enterprise model is a multi-constructional process where…

  20. Helping Children Cope with Fears and Stress. Part I: Discussion and Activities. Part II: Facilitator's Guide.

    ERIC Educational Resources Information Center

    Robinson, Edward H.; And Others

    How fears, phobias, anxiety and stress develop in elementary school students and how these students can be assisted in coping with fears and stress are discussed in this book. Part 1, "Discussion and Activities," contains six sections. Section 1 presents an overview of fears, and stress in children. Section 2 presents 12 fear-specific activities…

  1. 30 CFR Appendix II to Subpart D of... - Appendix II to Subpart D of Part 18

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Part 18 LIST OF FIGURES Figure No. Title 1 Typical layout drawing of a machine. 2 Sample bill of material (to accompany layout drawing shown on figure 1) 3 Material to be included with the operating... wires shall not be used for grounding except in conjunction with diode(s) or equivalent. The...

  2. Nuestra Familia: Primaria para Adultos. Segunda Parte. Edicion Experimental (Our Family: Primer for Adults. Part Two. Experimental Edition).

    ERIC Educational Resources Information Center

    Instituto Nacional para la Educacion de los Adultos, Mexico City (Mexico).

    This textbook is part of a Mexican series of instructional materials designed for Spanish speaking adults who are in the process of becoming literate or have recently become literate in their native language. It is designed to orient people with little education or developing literacy skills to a sense of responsibility toward their families.…

  3. Nuestro Trabajo: Primaria para Adultos. Segunda Parte. Edicion Experimental (Our Work: Primer for Adults. Part Two. Experimental Edition).

    ERIC Educational Resources Information Center

    Instituto Nacional para la Educacion de los Adultos, Mexico City (Mexico).

    This workbook is part of a Mexican series of instructional materials designed for Spanish speaking adults who are in the process of becoming literate or have recently become literate in their native language. This workbook is designed to orient people who are only recently literate to the world of work and business. Topics covered include worker…

  4. Nuestra Comunidad: Primaria para Adultos. Segunda Parte. Edicion Experimental (Our Community: Primer for Adults. Part Two. Experimental Edition).

    ERIC Educational Resources Information Center

    Instituto Nacional para la Educacion de los Adultos, Mexico City (Mexico).

    This textbook is part of a Mexican series of instructional materials designed for Spanish speaking adults who are in the process of becoming literate or have recently become literate in their native language. It is designed to teach people with developing literacy skills to participate in a meaningful way in the life of their community. Topics…

  5. Instrumentation and control improvements at Experimental Breeder Reactor II

    SciTech Connect

    Christensen, L.J.; Planchon, H.P.

    1993-01-01

    The purpose of this paper is to describe instrumentation and control (I C) system improvements at Experimental Breeder Reactor 11 (EBR-11). The improvements are focused on three objectives; to keep the reactor and balance of plant (BOP) I C systems at a high level of reliability, to provide diagnostic systems that can provide accurate information needed for analysis of fuel performance, and to provide systems that will be prototypic of I C systems of the next generation of liquid metal reactor (LMR) plants.

  6. Instrumentation and control improvements at Experimental Breeder Reactor II

    SciTech Connect

    Christensen, L.J.; Planchon, H.P.

    1993-03-01

    The purpose of this paper is to describe instrumentation and control (I&C) system improvements at Experimental Breeder Reactor 11 (EBR-11). The improvements are focused on three objectives; to keep the reactor and balance of plant (BOP) I&C systems at a high level of reliability, to provide diagnostic systems that can provide accurate information needed for analysis of fuel performance, and to provide systems that will be prototypic of I&C systems of the next generation of liquid metal reactor (LMR) plants.

  7. Fibre reinforced composite dental bridge. Part I: Experimental investigation.

    PubMed

    Li, W; Swain, M V; Li, Q; Ironside, J; Steven, G P

    2004-09-01

    This experimental investigation aims at revealing the mechanical behaviour and failure pattern of direct fibre-reinforced resin-bonded dental bridge with various designs. To evaluate the overall effects of some newly developed dental materials, in the experiment, genuine composite dental bridge specimens are prepared and tested. The ultimate load, stiffness and mode at the failure of the bridges are measured and compared with the design variations. A good agreement between test and some clinical observations is demonstrated. It is verified that the weakest region appears across the pontic-abutment interface in the composite bridges. This study suggests that the composite bridges reinforced by fibres and supported by adjacent teeth could be of a higher structural strength and stiffness; therefore would provide better clinical performances.

  8. Understanding Medicines: Conceptual Analysis of Nurses' Needs for Knowledge and Understanding of Pharmacology (Part I). Understanding Medicines: Extending Pharmacology Education for Dependent and Independent Prescribing (Part II).

    ERIC Educational Resources Information Center

    Leathard, Helen L.

    2001-01-01

    Part I reviews what nurses need to know about the administration and prescription of medicines. Part II addresses drug classifications, actions and effects, and interactions. Also discussed are the challenges pharmacological issues pose for nursing education. (SK)

  9. Dynamic spreading of nanofluids on solids. Part I: experimental.

    PubMed

    Kondiparty, Kirtiprakash; Nikolov, Alex D; Wasan, Darsh; Liu, Kuan-Liang

    2012-10-16

    Nanofluids have enhanced thermophysical properties compared to fluids without nanoparticles. Recent experiments have clearly shown that the presence of nanoparticles enhances the spreading of nanofluids. We report here the results of our experiments on the spreading of nanofluids comprising 5, 10, and 20 vol % silica suspensions of 19 nm particles displacing a sessile drop placed on a glass surface. The contact line position is observed from both the top and side views simultaneously using an advanced optical technique. It is found that the nanofluid spreads, forming a thin nanofluid film between the oil drop and the solid surface, which is seen as a bright inner contact line distinct from the conventional three-phase outer contact line. For the first time, the rate of the nanofluidic film spreading is experimentally observed as a function of the nanoparticle concentration and the oil drop volume. The speed of the inner contact line is seen to increase with an increase in the nanoparticle concentration and decrease with a decrease in the drop volume, that is, with an increase in the capillary pressure. Interestingly, the formation of the inner contact line is not seen in fluids without nanoparticles.

  10. Technical Information on the Carbonation of the EBR-II Reactor, Summary Report Part 2: Application to EBR-II Primary Sodium System and Related Systems

    SciTech Connect

    Steven R. Sherman; Collin J. Knight

    2006-03-01

    Residual sodium is defined as sodium metal that remains behind in pipes, vessels, and tanks after the bulk sodium metal has been melted and drained from such components. The residual sodium has the same chemical properties as bulk sodium, and differs from bulk sodium only in the thickness of the sodium deposit. Typically, sodium is considered residual when the thickness of the deposit is less than 5-6 cm. This residual sodium must be removed or deactivated when a pipe, vessel, system, or entire reactor is permanently taken out of service, in order to make the component or system safer and/or to comply with decontamination and decomissioning regulations. As an alternative to the established residual sodium deactivation techniques (steam-and-nitrogen, wet vapor nitrogen, etc.), a technique involving the use of moisture and carbon dioxide has been developed. With this technique, sodium metal is converted into sodium bicarbonate by reacting it with humid carbon dioxide. Hydrogen is emitted as a by-product. This technique was first developed in the laboratory by exposing sodium samples to humidifed carbon dioxide under controlled conditions, and then demonstrated on a larger scale by treating residual sodium within the Experimental Breeder Reactor II (EBR-II) secondary cooling system, followed by the primary cooling system, respectively. The EBR-II facility is located at the Idaho National Laboratory (INL) in southeastern Idaho, USA. This report is Part 2 of a two-part report. This second report provides a supplement to the first report and describes the application of the humdidified carbon dioxide technique ("carbonation") to the EBR-II primary tank, primary cover gas systems, and the intermediate heat exchanger. Future treatment plans are also provided.

  11. Torque Limit for Bolted Joint For Composites. Part B; Experimentation

    NASA Technical Reports Server (NTRS)

    Kostreva, Kristian M.

    2003-01-01

    Today, aerospace quality composite parts are generally made from either a unidirectional tape or a fabric prepreg form depending on the application. The matrix material, typically epoxy because of it dimensional stability, is pre-impregnated onto the fibers to ensure uniform distribution. Both of these composite forms are finding themselves used in applications where a joint is required. Two widely used joint methods are the classic mechanically fastened joint, and the contemporary bonded joint; however, the mechanically fastened joint is most commonly used by design engineers. A major portion of the research up-to-date about bolted composite joints has dealt with the inplane static load capacity. This work has helped to spawn standards dealing with filled-hole static joint strength. Other research has clearly shown that the clamp-up load in the mechanical fastener significantly affects the joint strength in a beneficial manner by reducing the bearing strength dependence of the composite laminate. One author reported a maximum increase in joint strength of 28%. This finding has helped to improve the reliability and efficiency of the joint in a composite structure.

  12. Experimental Breeder Reactor II (EBR-II): Instrumentation for core surveillance

    SciTech Connect

    Christensen, L.J.

    1989-01-01

    EBR-II has operated for 25 years in support of several major programs. During this time period, several of the original, non-replaceable, flow sensors, RDT sensors and thermocouples have failed in the primary system. This has led to the development of new sensors and the use of calculated values using computer models of the plant. It is important for the next generation of LMR reactors to minimize or eliminate the use of non-replaceable sensors. EBR-II is perhaps the best modeled reactor in the world, thanks to a dedicated T-H analysis program. The success of this program relied on excellent measurements of temperature and flow in subassemblies in the core. The instrumented subassemblies of the XX series provided that measurement capability. From this test series, EBR-II calculations showed that the core could withstand a loss-of-flow without scram accident and a loss-of-heat sink without scram accident from full reactor power without core damage. From this, reactor designers can now design with confidence, inherently safe reactors. 11 refs., 8 figs.

  13. Models and the dynamics of theory-building in physics. Part II-Case studies

    NASA Astrophysics Data System (ADS)

    Emch, Gérard G.

    In Part I, it was argued that models are best explained by considering the strategies from which they issue. A distinction was proposed between two classes of modeling that contribute to theory-building: H-modeling and L-modeling. Case studies are presented in this Part II to illustrate the characteristic features of these modeling strategies; examples are drawn from classical statistical mechanics and quantum physics.

  14. Cardiac angiotensin II type I and type II receptors are increased in rats submitted to experimental hypothyroidism

    PubMed Central

    Carneiro-Ramos, M S; Diniz, G P; Almeida, J; Vieira, R L P; Pinheiro, S V B; Santos, R A; Barreto-Chaves, M L M

    2007-01-01

    This study assessed the behaviour of angiotensin II (Ang II) receptors in an experimental hypothyroidism model in male Wistar rats. Animals were subjected to thyroidectomy and resting for 14 days. The alteration of cardiac mass was evaluated by total heart weight (HW), right ventricle weight (RVW), left ventricle weight (LVW), ratio of HW, RVW and LVW to body weight (BW) and atrial natriuretic factor (ANF) expression. Cardiac and plasma Ang II levels and serum T3 and T4 were determined. The mRNA and protein levels of Ang II receptors were investigated by RT-PCR and Western blotting, respectively. Functional analyses were performed using binding assays. T3 and T4 levels and the haemodynamic parameters confirmed the hypothyroid state. HW/BW, RVW/BW and LVW/BW ratios and the ANF expression were lower than those of control animals. No change was observed in cardiac or plasma Ang II levels. Both AT1/AT2 mRNA and protein levels were increased in the heart of hypothyroid animals due to a significant increase of these receptors in the RV. Experiments performed in cardiomyocytes showed a direct effect promoted by low thyroid hormone levels upon AT1 and AT2 receptors, discarding possible influence of haemodynamic parameters. Functional assays showed that both receptors are able to bind Ang II. Herein, we have identified, for the first time, a close and direct relation of elevated Ang II receptor levels in hypothyroidism. Whether the increase in these receptors in hypothyroidism is an alternative mechanism to compensate the atrophic state of heart or whether it may represent a potential means to the progression of heart failure remains unknown. PMID:17540701

  15. Civilian nuclear power on the drawing board: the development of Experimental Breeder Reactor-II.

    SciTech Connect

    Westfall, C.

    2003-02-20

    On September 28, 2001 a symposium was held at Argonne National Laboratory as part of the festivities to mark the 100th birthday of Enrico Fermi. The symposium celebrated Fermi's ''contribution to the development of nuclear power'' and focused on one particular ''line of development'' resulting from Fermi's interest in power reactors: Argonne's fast reactor program. Symposium participants made many references to the ways in which the program was linked to Fermi, who led the team which created the world's first self-sustaining nuclear chain reaction. For example, one presentation featured an April, 1944 memo that described a meeting attended by Fermi and others. The memo came from the time when research on plutonium and the nuclear chain reaction at Chicago's WWII Metallurgical Laboratory was nearing its end. Even as other parts of the Manhattan Engineering Project were building on this effort to create the bombs that would end the war, Fermi and his colleagues were taking the first steps to plan the use of nuclear energy in the postwar era. After noting that Fermi ''viewed the use of [nuclear] power for the heating of cities with sympathy,'' the group outlined several power reactor designs. In the course of discussion, Fermi and his colleagues took the first steps in conjuring the vision that would later be brought to life with Experimental Breeder Reactor I (EBR-I) and Experimental Breeder Reactor II (EBR-II), the celebrated achievements of the Argonne fast reactor program. Group members considered various schemes for a breeder reactor in which the relatively abundant U-238 would be placed near a core of fissionable material. The reactor would be a fast reactor; that is, neutrons would not be moderated, as were most wartime reactors. Thus, the large number of neutrons emitted in fast neutron fission would hit the U-238 and create ''extra'' fissionable material, that is, more than ''invested,'' and at the same time produce power. The group identified the problem of

  16. Experimental studies of U-Pu-Zr fast reactor fuel pins in EBR-II (Experimental Breeder Reactor)

    SciTech Connect

    Pahl, R.G.; Porter, D.L.; Lahm, C.E.; Hofman, G.L.

    1988-01-01

    The Integral Fast Reactor (IFR) is a generic reactor concept under development by Argonne National Laboratory. Much of the technology for the IFR is being demonstrated at the Experimental Breeder Reactor II (EBR-II) on the Department of Energy site near Idaho Falls, Idaho. The IFR concept relies on four technical features to achieve breakthroughs in nuclear power economics and safety: (1) a pool-type reactor configuration, (2) liquid sodium cooling, (3) metallic fuel, and (4) an integral fuel cycle with on-site reprocessing. The purpose of this paper will be to summarize our latest results of irradiation testing uranium-plutonium-zirconium (U-Pu-Zr) fuel in the EBR-II. 10 refs., 13 figs., 2 tabs.

  17. Title II, Part A: Don't Scrap It, Don't Dilute It, Fix It

    ERIC Educational Resources Information Center

    Coggshall, Jane G.

    2015-01-01

    The Issue: Washington is taking a close look at Title II, Part A (Title IIA) of the Elementary and Secondary Education Act (ESEA) as Congress debates reauthorization. The program sends roughly $2.5 billion a year to all states and nearly all districts to "(1) increase student academic achievement through strategies such as improving teacher…

  18. Instructional Climates in Preschool Children Who Are At-Risk. Part II: Perceived Physical Competence

    ERIC Educational Resources Information Center

    Robinson, Leah E.; Rudisill, Mary E.; Goodway, Jacqueline D.

    2009-01-01

    In Part II of this study, we examined the effect of two 9-week instructional climates (low-autonomy [LA] and mastery motivational climate [MMC]) on perceived physical competence (PPC) in preschoolers (N = 117). Participants were randomly assigned to an LA, MMC, or comparison group. PPC was assessed by a pretest, posttest, and retention test with…

  19. Managing the care of health and the cure of disease--Part II: Integration.

    PubMed

    Glouberman, S; Mintzberg, H

    2001-01-01

    The development of appropriate levels of integration in the system of health care and disease cure will require stronger collective cultures and enhanced communication among the key actors. Part II of this paper uses this line of argument to reframe four major issues in this system: coordination of acute cure and of community care, and collaboration in institutions and in the system at large.

  20. Student Performance on the NBME Part II Subtest and Subject Examination in Obstetrics-Gynecology.

    ERIC Educational Resources Information Center

    Metheny, William P.; Holzman, Gerald B.

    1988-01-01

    Comparison of the scores of 342 third-year medical students on the National Board of Medical Examiners subject examination and the Part II subtest on obstetrics-gynecology found significantly better performance on the former, suggesting a need to interpret the scores differently. (Author/MSE)

  1. Biology--Chemistry--Physics, Students' Guide, A Three-Year Sequence, Parts I and II.

    ERIC Educational Resources Information Center

    Scott, Arthur; And Others

    Parts I and II of the students' guide to the three-year integrated biology, chemistry, and physics course being prepared by the Portland Project Committee are contained in this guide. A committee reviewed and selected material developed by the national course improvement groups--Physical Science Study Committee, Chemical Bond Approach, Chemical…

  2. Thermoelectric Properties of Pristine and Doped Graphene Nanosheets and Graphene Nanoribbons: Part II

    NASA Astrophysics Data System (ADS)

    Muley, Sarang V.; Ravindra, N. M.

    2016-06-01

    In Part II of this study, approaches to improve the thermoelectric figure of merit ( ZT) of graphene nanosheets and nanoribbons is discussed. The presence of vacancies in graphene is found to increase the ZT of zigzag graphene nanoribbons significantly. Graphene can be a promising material with much better thermoelectric performance than conventional thermoelectrics.

  3. Experimental fluid dynamics. Part 1: Brief overview. Part 2: Flow modeling and verification experiments: RFE

    NASA Technical Reports Server (NTRS)

    Marvin, Joseph G.

    1987-01-01

    The role of experiment in Computational Fluid Dynamics (CFD) is discussed. Flow modeling of complex physics and determination of accuracy limits (confidence) are two ways in which experimentation can be used to develop CFD. The results of this discussion are presented in viewgraph form.

  4. Introduction to Psychology and Leadership. Research and Evaluation Plans; Part II.

    ERIC Educational Resources Information Center

    Westinghouse Learning Corp., Annapolis, MD.

    In the second of a two-part document (part I is under EM 010 475), the Westinghouse Learning Corporation provides further details on the research to be carried out in the experimental leadership course instituted at the United States Naval Academy (the final report appears under EM 010 418, EM 010 419, and EM 010 484). Further details are…

  5. Empirical Psycho-Aesthetics and Her Sisters: Substantive and Methodological Issues--Part II

    ERIC Educational Resources Information Center

    Konecni, Vladimir J.

    2013-01-01

    Empirical psycho-aesthetics is approached in this two-part article from two directions. Part I, which appeared in the Winter 2012 issue of "JAE," addressed definitional and organizational issues, including the field's origins, its relation to "sister" disciplines (experimental philosophy, cognitive neuroscience of art, and neuroaesthetics), and…

  6. An Analysis of a Finite Element Method for Convection-Diffusion Problems. Part II. A Posteriori Error Estimates and Adaptivity.

    DTIC Science & Technology

    1983-03-01

    AN ANALYSIS OF A FINITE ELEMENT METHOD FOR CONVECTION- DIFFUSION PROBLEMS PART II: A POSTERIORI ERROR ESTIMATES AND ADAPTIVITY by W. G. Szymczak Y 6a...PERIOD COVERED AN ANALYSIS OF A FINITE ELEMENT METHOD FOR final life of the contract CONVECTION- DIFFUSION PROBLEM S. Part II: A POSTERIORI ERROR ...Element Method for Convection- Diffusion Problems. Part II: A Posteriori Error Estimates and Adaptivity W. G. Szvmczak and I. Babu~ka# Laboratory for

  7. Technical Information on the Carbonation of the EBR-II Reactor, Summary Report Part 1: Laboratory Experiments and Application to EBR-II Secondary Sodium System

    SciTech Connect

    Steven R. Sherman

    2005-04-01

    Residual sodium is defined as sodium metal that remains behind in pipes, vessels, and tanks after the bulk sodium metal has been melted and drained from such components. The residual sodium has the same chemical properties as bulk sodium, and differs from bulk sodium only in the thickness of the sodium deposit. Typically, sodium is considered residual when the thickness of the deposit is less than 5-6 cm. This residual sodium must be removed or deactivated when a pipe, vessel, system, or entire reactor is permanently taken out of service, in order to make the component or system safer and/or to comply with decommissioning regulations. As an alternative to the established residual sodium deactivation techniques (steam-and-nitrogen, wet vapor nitrogen, etc.), a technique involving the use of moisture and carbon dioxide has been developed. With this technique, sodium metal is converted into sodium bicarbonate by reacting it with humid carbon dioxide. Hydrogen is emitted as a by-product. This technique was first developed in the laboratory by exposing sodium samples to humidified carbon dioxide under controlled conditions, and then demonstrated on a larger scale by treating residual sodium within the Experimental Breeder Reactor II (EBR-II) secondary cooling system, followed by the primary cooling system, respectively. The EBR-II facility is located at the Idaho National Laboratory (INL) in southeastern Idaho, U.S.A. This report is Part 1 of a two-part report. It is divided into three sections. The first section describes the chemistry of carbon dioxide-water-sodium reactions. The second section covers the laboratory experiments that were conducted in order to develop the residual sodium deactivation process. The third section discusses the application of the deactivation process to the treatment of residual sodium within the EBR-II secondary sodium cooling system. Part 2 of the report, under separate cover, describes the application of the technique to residual sodium

  8. The Basket Method for Selecting Balanced Samples. Part II. Applications to Price Estimation.

    DTIC Science & Technology

    1981-12-01

    AD-AI12 949 CLEMSON UNIV SC OEPT OF MATHEMATICAL SCIENCES F/B 12/1 THE BASKET METHOD FOR SELECTING BALANCED SAMPLES. PART 11. APPL-ETC(U) DEC SI K T...1111󈧝 1.4 1.6 MICROCOPY RESOLUTION TEST CHARTNN’( 4~ THE BASKET METHOD FOR SELECTING BALANCED SAMPLES - PART II: APPLICATIONS TO PRICE ESTIMATION * K...for Selecting Balanced Samples Part I: Applications to Price Estimation AB9TRACT The "Basket Method" of sampling, a tool designed to achieve

  9. Stochastic identification of composite material properties from limited experimental databases, part I: Experimental database construction

    NASA Astrophysics Data System (ADS)

    Mehrez, Loujaine; Moens, David; Vandepitte, Dirk

    2012-02-01

    Composite materials exhibit variability and uncertainties in their material properties with relation to their compositions and manufacturing processes. Conventional deterministic identification of composite material properties involves numerical-experimental characterisation techniques. These techniques do not account for the associated spatial variability and uncertainties in the identified properties. The objective of this work is to characterise spatially-stochastic macroscopic material properties of heterogeneous composite fabrics from limited-size macro-scale experimental measurements. The work is organised in a sequence of two papers. The first paper, present manuscript, is concerned with the construction of an experimental database of macroscopic material properties of heterogeneous composite fabrics from limited-size macro-scale experimental measurements. The mobility frequency response functions from a number of cantilever-beam specimens of the composite material are measured at selected points along each beam. These direct measurements are introduced to a set of deterministic inverse problems in order to reconstruct a database of heterogeneous Young's modulus spatial fields. The constructed database will be used, in the second paper of the sequence, to construct a stochastic model of the material properties that account for both aleatory uncertainties, related to sample inter-variability, as well as epistemic uncertainties due to insufficiency of the available data.

  10. Experimental Stark widths, shifts, and transition probabilities of several ArII lines

    SciTech Connect

    Aparicio, J. A.; Gigosos, M. A.; Mar, S.; Gonzalez, V. R.

    1997-01-05

    This paper is an extensive experimental contribution to the knowledge of ArII atomic parameters. This specie, which is very important for many astrophysical and industrial plasma diagnostics, has been extensively studied. However, there are still great differences in the experimental Stark widths and shifts coefficients, as well as a great lack of transition probability data, especially for lines coming from the very highly excited energy levels.

  11. Experimental Stark widths, shifts, and transition probabilities of several ArII lines

    SciTech Connect

    Aparicio, J.A.; Gigosos, M.A.; Mar, S.; Gonzalez, V.R.

    1997-01-01

    This paper is an extensive experimental contribution to the knowledge of ArII atomic parameters. This specie, which is very important for many astrophysical and industrial plasma diagnostics, has been extensively studied. However, there are still great differences in the experimental Stark widths and shifts coefficients, as well as a great lack of transition probability data, especially for lines coming from the very highly excited energy levels. {copyright} {ital 1997 American Institute of Physics.}

  12. An International Round-Robin Study, Part II: Thermal Diffusivity, Specific Heat and Thermal Conductivity

    SciTech Connect

    Wang, Hsin; Porter, Wallace D; Bottner, Harold; Konig, Jan; Chen, Lidong; Bai, Shengqiang; Tritt, Terry M.; Mayolett, Alex; Senawiratne, Jayantha; Smith, Charlene; Harris, Fred; Gilbert, Partricia; Sharp, J; Lo, Jason; Keinke, Holger; Kiss, Laszlo I.

    2013-01-01

    For bulk thermoelectrics, figure-of-merit, ZT, still needs to improve from the current value of 1.0 - 1.5 to above 2 to be competitive to other alternative technologies. In recent years, the most significant improvements in ZT were mainly due to successful reduction of thermal conductivity. However, thermal conductivity cannot be measured directly at high temperatures. The combined measurements of thermal diffusivity and specific heat and density are required. It has been shown that thermal conductivity is the property with the greatest uncertainty and has a direct influence on the accuracy of the figure of merit. The International Energy Agency (IEA) group under the implementing agreement for Advanced Materials for Transportation (AMT) has conducted two international round-robins since 2009. This paper is Part II of the international round-robin testing of transport properties of bulk bismuth telluride. The main focuses in Part II are on thermal diffusivity, specific heat and thermal conductivity.

  13. 40 CFR Appendix III to Part 266 - Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 26 2010-07-01 2010-07-01 false Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride III Appendix III to Part 266 Protection of Environment... to Part 266—Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride...

  14. 40 CFR Appendix III to Part 266 - Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 27 2014-07-01 2014-07-01 false Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride III Appendix III to Part 266 Protection of Environment... to Part 266—Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride...

  15. 40 CFR Appendix III to Part 266 - Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 28 2012-07-01 2012-07-01 false Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride III Appendix III to Part 266 Protection of Environment... to Part 266—Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride...

  16. 40 CFR Appendix III to Part 266 - Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 27 2011-07-01 2011-07-01 false Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride III Appendix III to Part 266 Protection of Environment... to Part 266—Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride...

  17. 40 CFR Appendix III to Part 266 - Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 28 2013-07-01 2013-07-01 false Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride III Appendix III to Part 266 Protection of Environment... to Part 266—Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride...

  18. The structure and interpretation of cosmology: Part II. The concept of creation in inflation and quantum cosmology

    NASA Astrophysics Data System (ADS)

    McCabe, Gordon

    The purpose of the paper, of which this is part II, is to review, clarify, and critically analyse modern mathematical cosmology. The emphasis is upon mathematical objects and structures, rather than numerical computations. Part II provides a critical analysis of inflationary cosmology and quantum cosmology, with particular attention to the claims made that these theories can explain the creation of the universe.

  19. Photoinactivation of Photosystem II in wild-type and chlorophyll b-less barley leaves: which mechanism dominates depends on experimental circumstances.

    PubMed

    He, Jie; Yang, Wenquan; Qin, Lin; Fan, Da-Yong; Chow, Wah Soon

    2015-12-01

    Action spectra of photoinactivation of Photosystem II (PS II) in wild-type and chlorophyll b-less barley leaf segments were obtained. Photoinactivation of PS II was monitored by the delivery of electrons from PS II to PS I following single-turnover flashes superimposed on continuous far-red light, the time course of photoinactivation yielding a rate coefficient k i. Susceptibility of PS II to photoinactivation was quantified as the ratio of k i to the moderate irradiance (I) of light at each selected wavelength. k i/I was very much higher in blue light than in red light. The experimental conditions permitted little excess light energy absorbed by chlorophyll (not utilized in photochemical conversion or dissipated in controlled photoprotection) that could lead to photoinactivation of PS II. Therefore, direct absorption of light by Mn in PS II, rather than by chlorophyll, was more likely to have initiated the much more severe photoinactivation in blue light than in red light. Mutant leaves were ca. 1.5-fold more susceptible to photoinactivation than the wild type. Neither the excess-energy mechanism nor the Mn mechanism can explain this difference. Instead, the much lower chlorophyll content of mutant leaves could have exerted an exacerbating effect, possibly partly due to less mutual shading of chloroplasts in the mutant leaves. In general, which mechanism dominates depends on the experimental conditions.

  20. Recruitment Early Warning System and Accession Contingency Planning Process. Phase II. Part 1.

    DTIC Science & Technology

    1984-11-01

    RD-A154 613 RECRUITMENT EARLY WARNING SYSTEM AND ACCESSION i/7 CONTINGENCY PLANNING PROCE..(U) ECONOMIC RESEARCH LAB INC RESTON YA L GOLDBERG ET AL...11 TITLE (include Security Classification) Recruitment Early Warning System and Accession Contingency Planning Process Phase II, Part 1 Final Report...GROUP Early Warning System, Forecasting, Manpower Planning LV &V WA&Vm 19. ABSTRACT (Continue on reverse if necessary and identify by block ny.1ber

  1. A Long-Term Memory Competitive Process Model of a Common Procedural Error. Part II: Working Memory Load and Capacity

    DTIC Science & Technology

    2013-07-01

    A Long-Term Memory Competitive Process Model of a Common Procedural Error, Part II: Working Memory Load and Capacity Franklin P. Tamborello, II...00-00-2013 4. TITLE AND SUBTITLE A Long-Term Memory Competitive Process Model of a Common Procedural Error, Part II: Working Memory Load and...07370024.2011.601692 Tamborello, F. P., & Trafton, J. G. (2013). A long-term competitive process model of a common procedural error. In Proceedings of the 35th

  2. DEUTERIUM, TRITIUM, AND HELIUM DESORPTION FROM AGED TITANIUM TRITIDES. PART II.

    SciTech Connect

    Shanahan, K; Jeffrey Holder, J

    2006-08-17

    Six new samples of tritium-aged bulk titanium have been examined by thermal desorption and isotope exchange chemistry. The discovery of a lower temperature hydrogen desorption state in these materials, previously reported, has been confirmed in one of the new samples. The helium release of the samples shows the more severe effects obtained from longer aging periods, i.e. higher initial He/M ratios. Several of the more aged samples were spontaneously releasing helium. Part I discussed the new results on the new lower temperature hydrogen desorption state found in one more extensively studied sample. Part II will discuss the hydrogen/helium release behavior of the remaining samples.

  3. Thermoelectric Generators for Automotive Waste Heat Recovery Systems Part II: Parametric Evaluation and Topological Studies

    NASA Astrophysics Data System (ADS)

    Kumar, Sumeet; Heister, Stephen D.; Xu, Xianfan; Salvador, James R.; Meisner, Gregory P.

    2013-06-01

    A comprehensive numerical model has been proposed to model thermoelectric generators (TEGs) for automotive waste heat recovery. Details of the model and results from the analysis of General Motors' prototype TEG were described in part I of the study. In part II of this study, parametric evaluations are considered to assess the influence of heat exchanger, geometry, and thermoelectric module configurations to achieve optimization of the baseline model. The computational tool is also adapted to model other topologies such as transverse and circular configurations (hexagonal and cylindrical) maintaining the same volume as the baseline TEG. Performance analysis of these different topologies and parameters is presented and compared with the baseline design.

  4. Paleotectonic investigations of the Mississippian System in the United States: Parts I and II

    USGS Publications Warehouse

    Craig, Lawrence C.; Connor, Carol Waite; Others,

    1979-01-01

    This professional paper is the fifth in a series of paleotectonic studies each covering a geologic system in the conterminous United States. Part I provides a region-by-region discussion of data concerning the Mississippian System and an explanation and documentation for the maps and sections contained in part III. Part II of the paper provides a summary of the Mississippian System, presents interregional interpretations permitted by this study, and includes sections on notable features of the system. The maps contained in the separate case as part III may be divided into two groups: (1) a sequence of factual or basic maps that shows, with a minimum of interpretation, the Mississippian System as it occurs today, and (2) interpretive maps that attempt a reasonable reconstruction of the original extent of the system, its tectonics, environment, and geography.

  5. Can focusing on UPDRS Part II make assessments of Parkinson disease progression more efficient?

    PubMed

    Sampaio, Cristina

    2009-03-01

    Harrison et al. have attempted to validate Part II of the Unified Parkinson's Disease Rating Scale (UPDRS II) as a medication-independent measure of disease progression. The authors collected cross-sectional data from a cohort of 888 patients with idiopathic Parkinson disease, and they found a robust association between UPDRS II scores and disease duration. Other variables considered were the patients' levodopa status, age at disease onset, and scores on UPDRS I, II and III. The results suggest that a single UPDRS II measurement might be a good indicator of progression at a given time point, irrespective of the current disease-related circumstances. This concept is attractive in its simplicity and patient-centeredness. However, this evidence came from a single-center, retrospective study, the statistical model was constructed using a nonvalidated surrogate as an independent variable, and no external replication was conducted. Until further confirmation, therefore, Harrison et al.'s proposal can only be considered to be a working hypothesis.

  6. Alchemical poetry in medieval and early modern Europe: a preliminary survey and synthesis. Part II - Synthesis.

    PubMed

    Kahn, Didier

    2011-03-01

    This article provides a preliminary description of medieval and early modern alchemical poetry composed in Latin and in the principal vernacular languages of western Europe. It aims to distinguish the various genres in which this poetry flourished, and to identify the most representative aspects of each cultural epoch by considering the medieval and early modern periods in turn. Such a distinction (always somewhat artificial) between two broad historical periods may be justified by the appearance of new cultural phenomena that profoundly modified the character of early modern alchemical poetry: the ever-increasing importance of the prisca theologia, the alchemical interpretation of ancient mythology, and the rise of neo-Latin humanist poetry. Although early modern alchemy was marked by the appearance of new doctrines (notably the alchemical spiritus mundi and Paracelsianism), alchemical poetry was only superficially modified by criteria of a scientific nature, which therefore appear to be of lesser importance. This study falls into two parts. Part I provides a descriptive survey of extant poetry, and in Part II the results of the survey are analysed in order to highlight such distinctive features as the function of alchemical poetry, the influence of the book market on its evolution, its doctrinal content, and the question of whether any theory of alchemical poetry ever emerged. Part II is accompanied by an index of the authors and works cited in both parts.

  7. Validity of NBME Parts I and II for the Selection of Residents: The Case of Orthopaedic Surgery.

    ERIC Educational Resources Information Center

    Case, Susan M.

    The predictive validity of scores on the National Board of Medical Examiners (NBME) Part I and Part II examinations for the selection of residents in orthopaedic surgery was investigated. Use of NBME scores has been criticized because of the time lag between taking Part I and entering residency and because Part I content is not directly linked to…

  8. Endothelium-Dependent Relaxation and Angiotensin II Sensitivity in Experimental Preeclampsia

    PubMed Central

    van der Graaf, Anne Marijn; Wiegman, Marjon J.; Plösch, Torsten; Zeeman, Gerda G.; van Buiten, Azuwerus; Henning, Robert H.; Buikema, Hendrik; Faas, Marijke M.

    2013-01-01

    Objective We investigated endothelial dysfunction and the role of angiotensin (Ang)-II type I (AT1-R) and type II (AT2-R) receptor in the changes in the Ang-II sensitivity in experimental preeclampsia in the rat. Methods Aortic rings were isolated from low dose lipopolysaccharide (LPS) infused pregnant rats (experimental preeclampsia; n=9), saline-infused pregnant rats (n=8), and saline (n=8) and LPS (n=8) infused non-pregnant rats. Endothelium-dependent acetylcholine--mediated relaxation was studied in phenylephrine-preconstricted aortic rings in the presence of vehicle, NG-nitro-L-arginine methyl ester and/or indomethacin. To evaluate the role for AT1-R and AT2-R in Ang-II sensitivity, full concentration response curves were obtained for Ang-II in the presence of losartan or PD123319. mRNA expression of the AT1-R and AT2-R, eNOS and iNOS, COX1 and COX2 in aorta were evaluated using real-time RT-PCR. Results The role of vasodilator prostaglandins in the aorta was increased and the role of endothelium-derived hyperpolarizing factor and response of the AT1-R and AT2-R to Ang-II was decreased in pregnant saline infused rats as compared with non-pregnant rats. These changes were not observed during preeclampsia. Conclusion Pregnancy induced adaptations in endothelial function, which were not observed in the rat model for preeclampsia. This role of lack of pregnancy induced endothelial adaptation in the pathophysiology of experimental preeclampsia needs further investigation. PMID:24223202

  9. Subseabed disposal program annual report, January-December 1980. Volume II. Appendices (principal investigator progress reports). Part 1

    SciTech Connect

    Hinga, K.R.

    1981-07-01

    Volume II of the sixth annual report describing the progress and evaluating the status of the Subseabed Disposal Program contains the appendices referred to in Volume I, Summary and Status. Because of the length of Volume II, it has been split into two parts for publication purposes. Part 1 contains Appendices A-Q; Part 2 contains Appendices R-MM. Separate abstracts have been prepared for each appendix for inclusion in the Energy Data Base.

  10. A Lagrangian variational formulation for nonequilibrium thermodynamics. Part II: Continuum systems

    NASA Astrophysics Data System (ADS)

    Gay-Balmaz, François; Yoshimura, Hiroaki

    2017-01-01

    Part I of this paper introduced a Lagrangian variational formulation for nonequilibrium thermodynamics of discrete systems. This variational formulation extends Hamilton's principle to allow the inclusion of irreversible processes in the dynamics. The irreversibility is encoded into a nonlinear nonholonomic constraint given by the expression of entropy production associated to all the irreversible processes involved. In Part II, we develop this formulation for the case of continuum systems by extending the setting of Part I to infinite dimensional nonholonomic Lagrangian systems. The variational formulation is naturally expressed in the material representation, while its spatial version is obtained via a nonholonomic Lagrangian reduction by symmetry. The theory is illustrated with the examples of a viscous heat conducting fluid and its multicomponent extension including chemical reactions and mass transfer.

  11. A legacy of struggle: the OSHA ergonomics standard and beyond, Part II.

    PubMed

    Delp, Linda; Mojtahedi, Zahra; Sheikh, Hina; Lemus, Jackie

    2014-11-01

    The OSHA ergonomics standard issued in 2000 was repealed within four months through a Congressional resolution that limits future ergonomics rulemaking. This section continues the conversation initiated in Part I, documenting a legacy of struggle for an ergonomics standard through the voices of eight labor, academic, and government key informants. Part I summarized important components of the standard; described the convergence of labor activism, research, and government action that laid the foundation for a standard; and highlighted the debates that characterized the rulemaking process. Part II explores the anti-regulatory political landscape of the 1990s, as well as the key opponents, power dynamics, and legal maneuvers that led to repeal of the standard. This section also describes the impact of the ergonomics struggle beyond the standard itself and ends with a discussion of creative state-level policy initiatives and coalition approaches to prevent work-related musculoskeletal disorders (WMSDs) in today's sociopolitical context.

  12. Market-Based Coordination of Thermostatically Controlled Loads—Part II: Unknown Parameters and Case Studies

    SciTech Connect

    Li, Sen; Zhang, Wei; Lian, Jianming; Kalsi, Karanjit

    2016-03-01

    This two-part paper considers the coordination of a population of Thermostatically Controlled Loads (TCLs) with unknown parameters to achieve group objectives. The problem involves designing the bidding and market clearing strategy to motivate self-interested users to realize efficient energy allocation subject to a peak power constraint. The companion paper (Part I) formulates the problem and proposes a load coordination framework using the mechanism design approach. To address the unknown parameters, Part II of this paper presents a joint state and parameter estimation framework based on the expectation maximization algorithm. The overall framework is then validated using real-world weather data and price data, and is compared with other approaches in terms of aggregated power response. Simulation results indicate that our coordination framework can effectively improve the efficiency of the power grid operations and reduce power congestion at key times.

  13. Compassionate care: enhancing physician-patient communication and education in dermatology: Part II: Patient education.

    PubMed

    Hong, Judith; Nguyen, Tien V; Prose, Neil S

    2013-03-01

    Patient education is a fundamental part of caring for patients. A practice gap exists, where patients want more information, while health care providers are limited by time constraints or difficulty helping patients understand or remember. To provide patient-centered care, it is important to assess the needs and goals, health beliefs, and health literacy of each patient. This allows health care providers to individualize education for patients. The use of techniques, such as gaining attention, providing clear and memorable explanations, and assessing understanding through "teach-back," can improve patient education. Verbal education during the office visit is considered the criterion standard. However, handouts, visual aids, audiovisual media, and Internet websites are examples of teaching aids that can be used as an adjunct to verbal instruction. Part II of this 2-part series on patient-physician interaction reviews the importance and need for patient education along with specific guidelines and techniques that can be used.

  14. Advances in explosives analysis—part II: photon and neutron methods

    DOE PAGES

    Brown, Kathryn E.; Greenfield, Margo T.; McGrane, Shawn D.; ...

    2015-10-07

    The number and capability of explosives detection and analysis methods have increased dramatically since publication of the Analytical and Bioanalytical Chemistry special issue devoted to Explosives Analysis [Moore DS, Goodpaster JV, Anal Bioanal Chem 395:245–246, 2009]. Here we review and critically evaluate the latest (the past five years) important advances in explosives detection, with details of the improvements over previous methods, and suggest possible avenues towards further advances in, e.g., stand-off distance, detection limit, selectivity, and penetration through camouflage or packaging. Our review consists of two parts. Part I discussed methods based on animals, chemicals (including colorimetry, molecularly imprinted polymers,more » electrochemistry, and immunochemistry), ions (both ion-mobility spectrometry and mass spectrometry), and mechanical devices. In Part II, we review methods based on photons, from very energetic photons including X-rays and gamma rays down to the terahertz range, and neutrons.« less

  15. Advances in explosives analysis—part II: photon and neutron methods

    SciTech Connect

    Brown, Kathryn E.; Greenfield, Margo T.; McGrane, Shawn D.; Moore, David S.

    2015-10-07

    The number and capability of explosives detection and analysis methods have increased dramatically since publication of the Analytical and Bioanalytical Chemistry special issue devoted to Explosives Analysis [Moore DS, Goodpaster JV, Anal Bioanal Chem 395:245–246, 2009]. Here we review and critically evaluate the latest (the past five years) important advances in explosives detection, with details of the improvements over previous methods, and suggest possible avenues towards further advances in, e.g., stand-off distance, detection limit, selectivity, and penetration through camouflage or packaging. Our review consists of two parts. Part I discussed methods based on animals, chemicals (including colorimetry, molecularly imprinted polymers, electrochemistry, and immunochemistry), ions (both ion-mobility spectrometry and mass spectrometry), and mechanical devices. In Part II, we review methods based on photons, from very energetic photons including X-rays and gamma rays down to the terahertz range, and neutrons.

  16. PREFACE: Part II of the Proceedings of the 25th International Conference on Low Temperature Physics

    NASA Astrophysics Data System (ADS)

    Kes, Peter; Jochemsen, Reyer

    2009-03-01

    This Issue of Journal of Physics: Conference Series forms Part II of the Proceedings of the 25th International Conference on Low Temperature Physics (LT25) held in Amsterdam, The Netherlands, 6-13 August 2008. Part II contains the papers of short oral and poster presentations. In addition, it provides general information about the LT25 conference, such as a Report from the Organizers, an Activity Report to the IUPAP of the C5 Chairs, an overview of Committees, Sponsors and Exhibitors, and some Conference Statistics. Part I of the Proceedings of LT25 is a special issue of Journal of Physics: Condensed Matter. It contains the majority of the special invited lectures, such as the London Prize Lectures, the IUPAP Young Scientist Award Lectures, the Plenary and Half Plenary and Public Lectures, and the Historical Lectures presented at the conference excursion to Leiden. The JPCM LT25 special issue is available for free for a period of one year from publication (Journal of Physics: Condensed Matter). To ensure the high publication standard mandated by Journal of Physics: Condensed Matter and Journal of Physics: Conference Series, every paper was reviewed by at least one referee before it was accepted for publication. The Editors are indebted to many colleagues for invaluable assistance in the preparation and with the reviewing of the 900 papers appearing in Parts I and II of these Proceedings. In particular, we like to thank Carlo Beenakker, Jeroen van den Brink, Hans Brom, Jos de Jongh, Horst Rogalla, and Fons de Waele. Guest Editors Peter Kes and Reijer Jochemsen Leiden University, The Netherlands Conference logo

  17. Low-order dynamic modeling of the Experimental Breeder Reactor II

    SciTech Connect

    Berkan, R.C. . Dept. of Nuclear Engineering); Upadhyaya, B.R.; Kisner, R.A. )

    1990-07-01

    This report describes the development of a low-order, linear model of the Experimental Breeder Reactor II (EBR-II), including the primary system, intermediate heat exchanger, and steam generator subsystems. The linear model is developed to represent full-power steady state dynamics for low-level perturbations. Transient simulations are performed using model building and simulation capabilities of the computer software Matrix{sub x}. The inherently safe characteristics of the EBR-II are verified through the simulation studies. The results presented in this report also indicate an agreement between the linear model and the actual dynamics of the plant for several transients. Such models play a major role in the learning and in the improvement of nuclear reactor dynamics for control and signal validation studies. This research and development is sponsored by the Advanced Controls Program in the Instrumentation and Controls Division of the Oak Ridge National Laboratory. 17 refs., 67 figs., 15 tabs.

  18. Repulsive interactions induced by specific adsorption: Anomalous step diffusivity and inadequacy of nearest-neighbor Ising model. (part I experimental)

    NASA Astrophysics Data System (ADS)

    Al-Shakran, Mohammad; Kibler, Ludwig A.; Jacob, Timo; Ibach, Harald; Beltramo, Guillermo L.; Giesen, Margret

    2016-09-01

    This is Part I of two closely related papers, where we show that the specific adsorption of anions leads to a failure of the nearest-neighbor Ising model to describe island perimeter curvatures on Au(100) electrodes in dilute KBr, HCl and H2SO4 electrolytes and the therewith derived step diffusivity vs. step orientation. This result has major consequences for theoretical studies aiming at the understanding of growth, diffusion and degradation phenomena. Part I focuses on the experimental data. As shown theoretically in detail in Part II (doi:10.1016/j.susc.2016.03.022), a set of nearest-neighbor and next-nearest-neighbor interaction energies (ɛNN, ɛNNN) can uniquely be derived from the diffusivity of steps along <100> and <110>. We find strong repulsive next-nearest neighbor (NNN) interaction in KBr and HCl, whereas NNN interaction is negligibly for H2SO4. The NNN repulsive interaction energy ɛNNN therefore correlates positively with the Gibbs adsorption energy of the anions. We find furthermore that ɛNNN increases with increasing Br- and Cl- coverage. The results for ɛNN and ɛNNN are quantitatively consistent with the coverage dependence of the step line tension. We thereby establish a sound experimental base for theoretical studies on the energetics of steps in the presence of specific adsorption.

  19. The problem of mechanical compatibility of natural building stones in the restoration of monuments. Part II: Specimens with modified boundaries

    NASA Astrophysics Data System (ADS)

    Ninis, Nikolaos L.; Kourkoulis, Stavros K.

    2011-12-01

    It was pointed out in Part I of this short two-paper series, that the mechanical incompatibility between the authentic building stone of ancient monuments and the stones used as substitute ones during restoration projects, may be the reason of violation of basic restoration principles concerning the protection of the ancient material. In this context certain geometrical configurations of the boundaries of the specimens are examined in this Part II as a possible means of modifying the mechanical behaviour of the substitute stones, in order to make them as compatible as possible with the authentic material. Modifications of both the contact surfaces (in order to change the friction conditions) of the specimens as well as of the free ones (in order to quantify the influence of transforming the smooth cylindrical surface to a fluted one) are examined experimentally. This approach is based on existing observations and numerical studies indicating that the behaviour of a stone specimen in the post-peak region is affected by the geometrical configuration of its boundaries. Taking advantage of the experimental results an alternative compatibility criterion is introduced for situations where the “required” quality of the building stone is its ability to withstand deformation without failing structurally, a characteristic pertinent to statically indeterminate structures, whose design is based on deformation control. This criterion combines both peak stress and maximum failure strain providing a better insight into the problem of mechanical incompatibility of natural building stones.

  20. Part I: In-situ fluorometric quantification of microalgal neutral lipids. Part II: Thermal degradation behavior of investment casting polymer patterns

    NASA Astrophysics Data System (ADS)

    Zhao, Hongfang

    Research described in this dissertation covers two topics. Part-I is focused on in-situ determination of neutral lipid content of microalgae using a lipophilic fluorescent dye. The traditional Nile red stain-based method for detecting microalgal intracellular lipids is limited due to varying composition and thickness of rigid cell walls. In this study, the addition of dilute acid and heating of solution, were found to greatly enhance staining efficiency of Nile red for microalgal species evaluated. Oil-in-water (O/W) microemulsion stabilized by a non-ionic surfactant was employed as a pseudo-standard that mimics lipid-bearing microalgal cells suspended in water. The average neutral lipid contents determined were very close to the results obtained by traditional gravimetric method and solid phase extraction. Part II of the dissertation explores thermo-physico-chemical properties of polymeric pattern materials, including expanded polystyrene (EPS) foam, polyurethane foam, and epoxy stereolithography (SLA) patterns, that are used in investment casting. Density, elastic modulus, expansion coefficient, thermal degradation behavior, etc. were experimentally investigated for their effects on metal casting quality. The reduction in toxic hydrogen cyanide (HCN) generated during thermal decomposition of polyurethane pattern was achieved by increasing either oxidant level or residence time in heated zone. Thermal degradation kinetics of the pattern materials were examined with a thermogravimetric analysis and activation energies were determined by Kissinger and Flynn-Wall-Ozawa methods.

  1. Part I - Viscous evolution of point vortex equilibria Part II - Effects of body elasticity on stability of fish motion

    NASA Astrophysics Data System (ADS)

    Jing, Fangxu

    2011-12-01

    Vortex dynamics and solid-fluid interactions are two of the most important and most studied topics in fluid dynamics for their relevance to a wide range of applications from geophysical flows to locomotion in moving fluids. In this work, we investigate two problems in two parts: Part I studies the viscous evolution of point vortex equilibria; Part II studies the effects of body elasticity on the passive stability of submerged bodies. In Part I, we describe the viscous evolution of point vortex configurations that, in the absence of viscosity, are in a state of fixed or relative equilibrium. In particular, we examine four cases, three of them correspond to relative equilibria in the inviscid point vortex model and one corresponds to a fixed equilibrium. Our goal is to elucidate the dominant transient dynamical features of the flow. A multi-Gaussian "core growing" type of model is typically used in high fidelity numerical simulations, but we propose to implement it as a low-order model for the flow field. We show that all four configurations immediately begin to rotate unsteadily. We then examine in detail the qualitative and quantitative evolution of the structures as they evolve, and for each case show the sequence of topological bifurcations that occur both in a fixed reference frame, and in an appropriately chosen rotating reference frame. Comparisons between the cases help to reveal different features of the viscous evolution for short and intermediate time scales of vortex structures. We examine the dynamical evolution of passive particles in the viscously evolving flows and interpret it in relation to the evolving streamline patterns. Although the low-order multi-Gaussian model does not exactly coincide with the Navier-Stokes solution, the two results show remarkable resemblances in many aspects. In Part II, we examine the effects of body geometry and elasticity on the passive stability of motion in a perfect fluid. Our main motivation is to understand the

  2. PIC Simulations in Low Energy Part of PIP-II Proton Linac

    SciTech Connect

    Romanov, Gennady

    2014-07-01

    The front end of PIP-II linac is composed of a 30 keV ion source, low energy beam transport line (LEBT), 2.1 MeV radio frequency quadrupole (RFQ), and medium energy beam transport line (MEBT). This configuration is currently being assembled at Fermilab to support a complete systems test. The front end represents the primary technical risk with PIP-II, and so this step will validate the concept and demonstrate that the hardware can meet the specified requirements. SC accelerating cavities right after MEBT require high quality and well defined beam after RFQ to avoid excessive particle losses. In this paper we will present recent progress of beam dynamic study, using CST PIC simulation code, to investigate partial neutralization effect in LEBT, halo and tail formation in RFQ, total emittance growth and beam losses along low energy part of the linac.

  3. REINFORCEMENT IN CLASSROOM LEARNING. PART II, STUDIES OF REINFORCEMENT IN SIMULATED CLASSROOM SITUATIONS. PART III, IDENTIFICATION OF REINFORCERS OF HUMAN BEHAVIOR.

    ERIC Educational Resources Information Center

    TRAVERS, ROBERT M.W.; AND OTHERS

    REINFORCEMENT CONCEPTS DERIVED LARGELY FROM RESEARCH OF SUBHUMAN SUBJECTS WERE TESTED FOR APPLICABILITY TO HUMAN-LEARNING SITUATIONS SIMILAR TO THOSE THAT OCCUR IN SCHOOLS. A SERIES OF EXPLORATORY STUDIES CONDUCTED IS DESCRIBED IN PART II OF THIS REPORT. IN PART III, TWO EXPERIMENTS CONDUCTED TO DETERMINE THE REINFORCING VALUE OF DIFFERENT STIMULI…

  4. Effective Thermal and Electrical Conductivities of AgSnO2 During Sintering. Part II: Constitutive Modeling and Numerical Simulation

    NASA Astrophysics Data System (ADS)

    Brisson, Elodie; Desplats, Henri; Carre, Patrick; Keryvin, Vincent; Rogeon, Philippe; Feulvarch, Eric; Bonhomme, Alexandre

    2016-12-01

    During resistance sintering (RS) of a conductive porous material, effective electrical and thermal conductivities have a great influence on the thermal gradients inside the matter, which could induce heterogeneous microstructures. Part I of this investigation focused on the characterization of the effective conductivities of AgSnO2 during sintering conditions, with the understanding of the relations between their evolutions and the microstructure. In Part II, the emphasis is on the development of appropriate constitutive equations able to describe the evolutions of the effective conductivities of AgSnO2 during RS. This work proposes constitutive equations taking into account the two main mechanisms, identified in Part I, which modify the contact conditions between the particles. The first mechanism corresponds to viscoplastic deformations of particles. A creep behavior law is used to calculate the macroscopic deformation and the densification kinetics. The second one deals with bonding diffusion under the effect of temperature, which decreases the contact resistance between the particles. As no specific effect of current has been highlighted in the case of AgSnO2, the effective conductivities' behavior laws are available for RS and for hot pressing (HP). Relationships for effective conductivities are included in the numerical HP model and combined with governing laws. Finite element analyses are compared to experimental results obtained from HP tests to validate and discuss the model.

  5. Human Performance Review of the Retail Repair Parts Supply System. Volume II.

    DTIC Science & Technology

    1980-02-01

    R L KEESEE. B B CAMDEN, R M POWERS UNCLASSIFIED 1NEL-TM- 3 -80-VOL-I NL 11111112.211L Hill ’ IIII 1 1 1 -11IL25=14 44 MICROCOPY RESOLUTION TEST CH*T...NATIONAL BUREAU OF STANVARDS-2963- Technical Memorandum 3 -80 - HUMAN PERFORMANCE REVIEW OF THE RETAIL REPAIR PARTS SUPPLY SYSTEM VOLUME II 1 FINAL...forandum 3 -80 HUMAN PERFORMANCEJEVIEW OF THE XETAIL lP7AIR( f P RTS SUPPLY SYST M f ., " 1 .. UM UoL ._ (L XINAL UPT.!7 ’F J6 j+77 Richard S.j Camden

  6. PA impairment due to HIV infection. Part II: Building a professional support network. Forum.

    PubMed

    Behar, M; Bogstad, J R; Gage, L; James, D A; Mott, J S

    1989-11-01

    Several members of the AAPA's Lesbian and Gay Physician Assistants Caucus who participated in the roundtable PAs and HIV-Antibody Testing: The Need for Guidelines When the Practitioner Is at Risk (1989;13[5]:146-158) met with members of the 12-Step/Caduceus Caucus to begin developing a cooperative effort to assist PAs who test positive for antibodies to the human immunodeficiency virus, and to explore other HIV-associated impairment issues. Part II focuses on concerns of the provider who is HIV-antibody positive as well as ways PA groups can cooperate to raise the profession's conciousness further and recommend guidelines and policy.

  7. A framework for biodynamic feedthrough analysis--part II: validation and application.

    PubMed

    Venrooij, Joost; van Paassen, Marinus M; Mulder, Mark; Abbink, David A; Mulder, Max; van der Helm, Frans C T; Bulthoff, Heinrich H

    2014-09-01

    Biodynamic feedthrough (BDFT) is a complex phenomenon, that has been studied for several decades. However, there is little consensus on how to approach the BDFT problem in terms of definitions, nomenclature, and mathematical descriptions. In this paper, the framework for BDFT analysis, as presented in Part I of this dual publication, is validated and applied. The goal of this framework is twofold. First of all, it provides some common ground between the seemingly large range of different approaches existing in BDFT literature. Secondly, the framework itself allows for gaining new insights into BDFT phenomena. Using recently obtained measurement data, parts of the framework that were not already addressed elsewhere, are validated. As an example of a practical application of the framework, it will be demonstrated how the effects of control device dynamics on BDFT can be understood and accurately predicted. Other ways of employing the framework are illustrated by interpreting the results of three selected studies from the literature using the BDFT framework. The presentation of the BDFT framework is divided into two parts. This paper, Part II, addresses the validation and application of the framework. Part I, which is also published in this journal issue, addresses the theoretical foundations of the framework. The work is presented in two separate papers to allow for a detailed discussion of both the framework's theoretical background and its validation.

  8. The FERRUM Project: Experimental Transition Probabilities of [Fe II] and Astrophysical Applications

    NASA Technical Reports Server (NTRS)

    Hartman, H.; Derkatch, A.; Donnelly, M. P.; Gull, T.; Hibbert, A.; Johannsson, S.; Lundberg, H.; Mannervik, S.; Norlin, L. -O.; Rostohar, D.

    2002-01-01

    We report on experimental transition probabilities for thirteen forbidden [Fe II] lines originating from three different metastable Fe II levels. Radiative lifetimes have been measured of two metastable states by applying a laser probing technique on a stored ion beam. Branching ratios for the radiative decay channels, i.e. M1 and E2 transitions, are derived from observed intensity ratios of forbidden lines in astrophysical spectra and compared with theoretical data. The lifetimes and branching ratios are combined to derive absolute transition probabilities, A-values. We present the first experimental lifetime values for the two Fe II levels a(sup 4)G(sub 9/2) and b(sup 2)H(sub 11/2) and A-values for 13 forbidden transitions from a(sup 6)S(sub 5/2), a(sup 4)G(sub 9/2) and b(sup 4)D(sub 7/2) in the optical region. A discrepancy between the measured and calculated values of the lifetime for the b(sup 2)H(sub 11/2) level is discussed in terms of level mixing. We have used the code CIV3 to calculate transition probabilities of the a(sup 6)D-a(sup 6)S transitions. We have also studied observational branching ratios for lines from 5 other metastable Fe II levels and compared them to calculated values. A consistency in the deviation between calibrated observational intensity ratios and theoretical branching ratios for lines in a wider wavelength region supports the use of [Fe II] lines for determination of reddening.

  9. Transferring diffractive optics from research to commercial applications: Part II - size estimations for selected markets

    NASA Astrophysics Data System (ADS)

    Brunner, Robert

    2014-04-01

    In a series of two contributions, decisive business-related aspects of the current process status to transfer research results on diffractive optical elements (DOEs) into commercial solutions are discussed. In part I, the focus was on the patent landscape. Here, in part II, market estimations concerning DOEs for selected applications are presented, comprising classical spectroscopic gratings, security features on banknotes, DOEs for high-end applications, e.g., for the semiconductor manufacturing market and diffractive intra-ocular lenses. The derived market sizes are referred to the optical elements, itself, rather than to the enabled instruments. The estimated market volumes are mainly addressed to scientifically and technologically oriented optical engineers to serve as a rough classification of the commercial dimensions of DOEs in the different market segments and do not claim to be exhaustive.

  10. Signal classification using global dynamical models, Part II: SONAR data analysis

    SciTech Connect

    Kremliovsky, M.; Kadtke, J.

    1996-06-01

    In Part I of this paper, we described a numerical method for nonlinear signal detection and classification which made use of techniques borrowed from dynamical systems theory. Here in Part II of the paper, we will describe an example of data analysis using this method, for data consisting of open ocean acoustic (SONAR) recordings of marine mammal transients, supplied from NUWC sources. The purpose here is two-fold: first to give a more operational description of the technique and provide rules-of-thumb for parameter choices; and second to discuss some new issues raised by the analysis of non-ideal (real-world) data sets. The particular data set considered here is quite non-stationary, relatively noisy, is not clearly localized in the background, and as such provides a difficult challenge for most detection/classification schemes. {copyright} {ital 1996 American Institute of Physics.}

  11. Design of site specific radiopharmaceuticals for tumor imaging. (Parts I and II)

    SciTech Connect

    Van Dort, M.E.

    1983-01-01

    Part I. Synthetic methods were developed for the preparation of several iodinated benzoic acid hydrazides as labeling moieties for indirect tagging of carbonyl-containing bio-molecules and potential tumor-imaging agents. Biodistribution studies conducted in mice on the derivatives having the I-125 label ortho to a phenolic OH demonstrated a rapid in vivo deiodination. Part II. The reported high melanin binding affinity of quinoline and other heterocyclic antimalarial drugs led to the development of many analogues of such molecules as potential melanoma-imaging agents. Once such analogue iodochloroquine does exhibit high melanin binding, but has found limited clinical use due to appreciable accumulation in non-target tissues such as the adrenal cortex and inner ear. This project developed a new series of candidate melanoma imaging agents which would be easier to radio-label, could yield higher specific activity product, and which might demonstrate more favorable pharmacokinetic and dosimetric characteristics compared to iodochloroquine.

  12. Signal classification using global dynamical models, Part II: SONAR data analysis

    NASA Astrophysics Data System (ADS)

    Kremliovsky, Michael; Kadtke, James

    1996-06-01

    In Part I of this paper, we described a numerical method for nonlinear signal detection and classification which made use of techniques borrowed from dynamical systems theory. Here in Part II of the paper, we will describe an example of data analysis using this method, for data consisting of open ocean acoustic (SONAR) recordings of marine mammal transients, supplied from NUWC sources. The purpose here is two-fold: first to give a more operational description of the technique and provide rules-of-thumb for parameter choices; and second to discuss some new issues raised by the analysis of non-ideal (real-world) data sets. The particular data set considered here is quite non-stationary, relatively noisy, is not clearly localized in the background, and as such provides a difficult challenge for most detection/classification schemes.

  13. Exploring Cancer Therapeutics with Natural Products from African Medicinal Plants, Part II: Alkaloids, Terpenoids and Flavonoids.

    PubMed

    Nwodo, Justina N; Ibezim, Akachukwu; Simoben, Conrad V; Ntie-Kang, Fidele

    2016-01-01

    Cancer stands as second most common cause of disease-related deaths in humans. Resistance of cancer to chemotherapy remains challenging to both scientists and physicians. Medicinal plants are known to contribute significantly to a large population of Africa, which is to a very large extent linked to folkloric claims which is part of their livelihood. In this review paper, the potential of naturally occurring anti-cancer agents from African flora has been explored, with suggested modes of action, where such data is available. Literature search revealed plant-derived compounds from African flora showing anti-cancer and/or cytotoxic activities, which have been tested in vitro and in vivo. This corresponds to 400 compounds (from mildly active to very active) covering various compound classes. However, in this part II, we only discussed the three major compound classes which are: flavonoids, alkaloids and terpenoids.

  14. Pregnancy in women with renal disease. Part II: specific underlying renal conditions.

    PubMed

    Vidaeff, Alex C; Yeomans, Edward R; Ramin, Susan M

    2008-08-01

    The obstetric outcome in women with kidney disease has improved in recent years due to continuous progress in obstetrics and neonatology, as well as better medical management of hypertension and renal disease. However, every pregnancy in these women remains a high-risk pregnancy. When considering the interaction between renal disease and pregnancy, maternal outcomes are related to the initial level of renal dysfunction more than to the specific underlying disease. With regards to fetal outcomes, though, a distinction may exist between renal dysfunction resulting from primary renal disease and that in which renal involvement is part of a systemic disease. In part II of this review, some specific causes of renal failure affecting pregnancy are considered.

  15. Caterpillars and moths: Part II. Dermatologic manifestations of encounters with Lepidoptera.

    PubMed

    Hossler, Eric W

    2010-01-01

    Caterpillars and moths (order Lepidoptera) are uncommonly recognized causes of adverse cutaneous reactions, such as localized stings, papular dermatitis, and urticarial wheals. These reactions are typically mild and self-limited; however, in South America, the sting of Lonomia caterpillars can cause a potentially fatal hemorrhagic diathesis related to massive fibrinolysis. In addition, ocular inflammation and prominent arthralgias have been reported to be caused by caterpillar exposures. Therapies for mucocutaneous reactions to Lepidoptera are largely empiric, with the exception of antivenin against Lonomia obliqua envenomation. Part II of this two-part series on caterpillars and moths reviews the varied symptoms caused by Lepidopteran exposures, reviews the differential diagnosis, and discusses appropriate treatment algorithms.

  16. Part I. Inviscid, Swirling Flows and Vortex Breakdown. Part II. a Numerical Investigation of the Lundgren Turbulence Model.

    NASA Astrophysics Data System (ADS)

    Buntine, James Douglas

    Part I. A study of the behaviour of an inviscid, swirling fluid is performed. This flow can be described by the Squire-Long equation if the constraints of time -independence and axisymmetry are invoked. The particular case of flow through a diverging pipe is selected and a study is conducted to determine over what range of parameters (both pipe inlet conditions and geometry) does a (unique) solution exist. The work is performed with a view to understanding how the phenomenon of vortex breakdown develops. Experiments and previous numerical studies have indicated that the flow is sensitive to boundary conditions particularly at the pipe inlet. A "quasi-cylindrical" simplification of the Squire-Long equation is compared with the more complete model and shown to be able to account for most of its behaviour. An advantage of this latter representation is the relatively undetailed description of the flow geometry it requires in order to calculate a solution. "Criticality" or the ability of small disturbances to propagate upstream is related to results of the quasi -cylindrical and axisymmetric flow models. This leads to an examination of claims made by researchers such as Benjamin and Hall concerning the interrelationship between "failure" of the quasi-cylindrical model and the occurrence of a "critical" flow state. Other criteria for predicting the onset of vortex breakdown are considered in the context of the model employed, particularly those of Brown & Lopez and Spall, Gatski & Grosch. Part II. Lundgren (1982) developed an analytical model for homogeneous turbulence based on a collection of contracting spiral vortices each embedded in an axisymmetric strain field. Using asymptotic approximations he was able to deduce the Kolmogorov k^{-5/3} behaviour for inertial scales in the turbulence energy spectrum. Pullin & Saffman have enlarged upon his work to make a number of predictions about the behaviour of turbulence described by the model. This work investigates the

  17. Part I: Sound color in the music of Gyorgy Kurtag, Part II: "Leopard's Path," thirteen visions for chamber ensemble

    NASA Astrophysics Data System (ADS)

    Iachimciuc, Igor

    The dissertation is in two parts, a theoretical study and a musical composition. In Part I the music of Gyorgy Kurtag is analyzed from the point of view of sound color. A brief description of what is understood by the term sound color, and various ways of achieving specific coloristic effects, are presented in the Introduction. An examination of Kurtag's approaches to the domain of sound color occupies the chapters that follow. The musical examples that are analyzed are selected from Kurtag's different compositional periods, showing a certain consistency in sound color techniques, the most important of which are already present in the String Quartet, Op. 1. The compositions selected for analysis are written for different ensembles, but regardless of the instrumentation, certain principles of the formation and organization of sound color remain the same. Rather than relying on extended instrumental techniques, Kurtag creates a large variety of sound colors using traditional means such as pitch material, register, density, rhythm, timbral combinations, dynamics, texture, spatial displacement of the instruments, and the overall musical context. Each sound color unit in Kurtag's music is a separate entity, conceived as a complete microcosm. Sound color units can either be juxtaposed as contrasting elements, forming sound color variations, or superimposed, often resulting in a Klangfarbenmelodie effect. Some of the same gestural figures (objets trouves) appear in different compositions, but with significant coloristic modifications. Thus, the principle of sound color variations is not only a strong organizational tool, but also a characteristic stylistic feature of the music of Gyorgy Kurtag. Part II, Leopard's Path (2010), for flute, clarinet, violin, cello, cimbalom, and piano, is an original composition inspired by the painting of Jesse Allen, a San Francisco based artist. The composition is conceived as a cycle of thirteen short movements. Ten of these movements are

  18. Experimental observation of topological Fermi arcs in type-II Weyl semimetal MoTe2

    NASA Astrophysics Data System (ADS)

    Deng, Ke; Wan, Guoliang; Deng, Peng; Zhang, Kenan; Ding, Shijie; Wang, Eryin; Yan, Mingzhe; Huang, Huaqing; Zhang, Hongyun; Xu, Zhilin; Denlinger, Jonathan; Fedorov, Alexei; Yang, Haitao; Duan, Wenhui; Yao, Hong; Wu, Yang; Fan, Shoushan; Zhang, Haijun; Chen, Xi; Zhou, Shuyun

    2016-12-01

    Weyl semimetal is a new quantum state of matter hosting the condensed matter physics counterpart of the relativistic Weyl fermions originally introduced in high-energy physics. The Weyl semimetal phase realized in the TaAs class of materials features multiple Fermi arcs arising from topological surface states and exhibits novel quantum phenomena, such as a chiral anomaly-induced negative magnetoresistance and possibly emergent supersymmetry. Recently it was proposed theoretically that a new type (type-II) of Weyl fermion that arises due to the breaking of Lorentz invariance, which does not have a counterpart in high-energy physics, can emerge as topologically protected touching between electron and hole pockets. Here, we report direct experimental evidence of topological Fermi arcs in the predicted type-II Weyl semimetal MoTe2 (refs ,,). The topological surface states are confirmed by directly observing the surface states using bulk- and surface-sensitive angle-resolved photoemission spectroscopy, and the quasi-particle interference pattern between the putative topological Fermi arcs in scanning tunnelling microscopy. By establishing MoTe2 as an experimental realization of a type-II Weyl semimetal, our work opens up opportunities for probing the physical properties of this exciting new state.

  19. Mineral resources of parts of the Departments of Antioquia and Caldas, Zone II, Colombia

    USGS Publications Warehouse

    Hall, R.B.; Feininger, Tomas; Barrero, L.; Dario, Rico H.; ,; Alvarez, A.

    1970-01-01

    The mineral resources of an area of 40,000 sq km, principally in the Department of Antioquia, but including small parts of the Departments of Caldas, C6rdoba, Risaralda, and Tolima, were investigated during the period 1964-68. The area is designated Zone II by the Colombian Inventario Minero Nacional(lMN). The geology of approximately 45 percent of this area, or 18,000 sq km, has been mapped by IMN. Zone II has been a gold producer for centuries, and still produces 75 percent of Colombia's gold. Silver is recovered as a byproduct. Ferruginous laterites have been investigated as potential sources of iron ore but are not commercially exploitable. Nickeliferous laterite on serpentinite near Ure in the extreme northwest corner of the Zone is potentially exploitable, although less promising than similar laterites at Cerro Matoso, north of the Zone boundary. Known deposits of mercury, chromium, manganese, and copper are small and have limited economic potentia1. Cement raw materials are important among nonmetallic resources, and four companies are engaged in the manufacture of portland cement. The eastern half of Zone II contains large carbonate rock reserves, but poor accessibility is a handicap to greater development at present. Dolomite near Amalfi is quarried for the glass-making and other industries. Clay saprolite is abundant and widely used in making brick and tiles in backyard kilns. Kaolin of good quality near La Union is used by the ceramic industry. Subbituminous coal beds of Tertiary are an important resource in the western part of the zone and have good potential for greater development. Aggregate materials for construction are varied and abundant. Deposits of sodic feldspar, talc, decorative stone, and silica are exploited on a small scale. Chrysotils asbestos deposits north of Campamento are being developed to supply fiber for Colombia's thriving asbestos-cement industry, which is presently dependent upon imported fiber. Wollastonite and andalusite are

  20. Analysis of Radionuclide Releases from the Fukushima Dai-ichi Nuclear Power Plant Accident Part II

    NASA Astrophysics Data System (ADS)

    Achim, Pascal; Monfort, Marguerite; Le Petit, Gilbert; Gross, Philippe; Douysset, Guilhem; Taffary, Thomas; Blanchard, Xavier; Moulin, Christophe

    2014-03-01

    The present part of the publication (Part II) deals with long range dispersion of radionuclides emitted into the atmosphere during the Fukushima Dai-ichi accident that occurred after the March 11, 2011 tsunami. The first part (Part I) is dedicated to the accident features relying on radionuclide detections performed by monitoring stations of the Comprehensive Nuclear Test Ban Treaty Organization network. In this study, the emissions of the three fission products Cs-137, I-131 and Xe-133 are investigated. Regarding Xe-133, the total release is estimated to be of the order of 6 × 1018 Bq emitted during the explosions of units 1, 2 and 3. The total source term estimated gives a fraction of core inventory of about 8 × 1018 Bq at the time of reactors shutdown. This result suggests that at least 80 % of the core inventory has been released into the atmosphere and indicates a broad meltdown of reactor cores. Total atmospheric releases of Cs-137 and I-131 aerosols are estimated to be 1016 and 1017 Bq, respectively. By neglecting gas/particulate conversion phenomena, the total release of I-131 (gas + aerosol) could be estimated to be 4 × 1017 Bq. Atmospheric transport simulations suggest that the main air emissions have occurred during the events of March 14, 2011 (UTC) and that no major release occurred after March 23. The radioactivity emitted into the atmosphere could represent 10 % of the Chernobyl accident releases for I-131 and Cs-137.

  1. An Evaluative Survey Report on ESEA Title II: Fiscal Years 1966-1968. Part I, Analysis and Interpretation. Part II, Tables.

    ERIC Educational Resources Information Center

    Office of Education (DHEW), Washington, DC.

    This report provides benchmark data on the effects that the provision of school library resources, textbooks, and other instructional materials under Title II of the Elementary and Secondary Education Act (ESEA) has had on education in the nation's public and private elementary and secondary schools. The passage of Title II of ESEA set the stage…

  2. Experimental and calculational analyses of actinide samples irradiated in EBR-II

    SciTech Connect

    Gilai, D.; Williams, M.L.; Cooper, J.H.; Laing, W.R.; Walker, R.L.; Raman, S.; Stelson, P.H.

    1982-10-01

    Higher actinides influence the characteristics of spent and recycled fuel and dominate the long-term hazards of the reactor waste. Reactor irradiation experiments provide useful benchmarks for testing the evaluated nuclear data for these actinides. During 1967 to 1970, several actinide samples were irradiated in the Idaho EBR-II fast reactor. These samples have now been analyzed, employing mass and alpha spectrometry, to determine the heavy element products. A simple spherical model for the EBR-II core and a recent version of the ORIGEN code with ENDF/B-V data were employed to calculate the exposure products. A detailed comparison between the experimental and calculated results has been made. For samples irradiated at locations near the core center, agreement within 10% was obtained for the major isotopes and their first daughters, and within 20% for the nuclides up the chain. A sensitivity analysis showed that the assumed flux should be increased by 10%.

  3. Development and comparison of a TOPAZ-II system model with experimental data

    SciTech Connect

    Paramonov, D.V.; El-Genk, M.S. . Inst. for Space Nuclear Power Studies)

    1994-11-01

    An integrated model of the TOPAZ-II space nuclear reactor system is developed and compared with measurements from the TOPAZ-II, V-71 unit tests. For a given reactor thermal power, the model calculates the coolant flow rate, temperature, and pressure throughout the system; load electric power; and overall system efficiency. Model predictions showed good agreement with the experimental data. The calculated coolant temperatures and pressure are within 15 K (< 2%) and 12% of the measurements, respectively. Analysis showed that at the nominal operating thermal power of the system (115 kW), and NaK coolant is highly subcooled. The largest subcooling of 365 K occurs at the exit of the electromagnetic pump, where coolant pressure is highest, and the lowest subcooling of 275 K occurs at the exit of the reactor core, where coolant temperature is highest.

  4. On the heat flux vector for flowing granular materials--part II: derivation and special cases

    SciTech Connect

    Massoudi, Mehrdad

    2006-09-10

    Heat transfer plays a major role in the processing of many particulate materials. The heat flux vector is commonly modelled by the Fourier's law of heat conduction and for complex materials such as non-linear fluids, porous media, or granular materials, the coefficient of thermal conductivity is generalized by assuming that it would depend on a host of material and kinematical parameters such as temperature, shear rate, porosity or concentration, etc. In Part I, we will give a brief review of the basic equations of thermodynamics and heat transfer to indicate the importance of the modelling of the heat flux vector. We will also discuss the concept of effective thermal conductivity (ETC) in granular and porous media. In Part II, we propose and subsequently derive a properly frame-invariant constitutive relationship for the heat flux vector for a (single phase) flowing granular medium. Standard methods in continuum mechanics such as representation theorems and homogenization techniques are used. It is shown that the heat flux vector in addition to being proportional to the temperature gradient (the Fourier's law), could also depend on the gradient of density (or volume fraction), and D (the symmetric part of the velocity gradient) in an appropriate manner. The emphasis in this paper is on the idea that for complex non-linear materials it is the heat flux vector which should be studied; obtaining or proposing generalized form of the thermal conductivity is not always appropriate or sufficient.

  5. Synthesis, experimental and theoretical characterization of palladium(II) and platinum(II) saccharinate complexes with 2-(2-pyridyl)benzimidazole

    NASA Astrophysics Data System (ADS)

    Guney, Emel; Kaya, Yunus; Yilmaz, Veysel T.; Gumus, Sedat

    2011-09-01

    New palladium(II) and platinum(II) complexes of saccharinate (sac) with 2-(2-pyridyl)benzimidazole (pybim) have been synthesized and characterized by elemental analysis and spectroscopic techniques. From the experimental studies, these complexes were formulated as [Pd(pybim)(sac) 2] ( 1), and [Pt(pybim)(sac) 2]·4H 2O ( 2). The ground-state geometries of both complexes were optimized using density functional theory (DFT) methods at the B3LYP level. A bidentate pybim ligand together with two N-coordinated sac ligands form the square-planar MN 4 coordination geometry around the palladium(II) and platinum(II) ions. The calculated IR and UV-vis spectral data have been correlated to the experimental results. Thermal analysis data support the molecular structures of both complexes.

  6. Sorption modelling on illite. Part II: Actinide sorption and linear free energy relationships

    NASA Astrophysics Data System (ADS)

    Bradbury, M. H.; Baeyens, B.

    2009-02-01

    Sorption edge data for Ni(II), Co(II), Eu(III) and Sn(IV) [Bradbury M. H. and Baeyens B. (2009) Sorption modelling on illite. Part I: titration measurements and sorption of Ni(II), Co(II), Eu(III) and Sn(IV), Part I] on purified Na-Illite du Puy are available from some previous work, and some new measurements for Am(III), Th(IV), Pa(V) and U(VI) are presented here. All of these sorption edge measurements have been modelled with a 2 site protolysis non-electrostatic surface complexation and cation exchange (2SPNE SC/CE) sorption model for which the site types, site capacities and protolysis constants were fixed [Bradbury M. H. and Baeyens B. (2009), Part I]. In addition, two further data sets for the sorption of Am(III) and Np(V) on Illite du Puy, obtained from the literature, were also modelled in this work. Thus, surface complexation constants for the strong sites in the 2SPNE SC/CE sorption model for nine metals with valence states from II to VI have been obtained. A linear relationship between the logarithm of strong site metal binding constants, SK x-1, and the logarithm of the corresponding aqueous hydrolysis stability constant, OHK x, extending over nearly 35 orders of magnitude is established here for illite for these nine metals. Such correlations are often termed linear free energy relationships (LFER), and although they are quite common in aqueous phase chemistry, they are much less so in surface chemistry, especially over this large range. The LFER for illite could be described by the equation: logSK=7.9±0.4+(0.83±0.02)logOHKx where, " x" is an integer. A similar relationship has been previously obtained for montmorillonite, thus LFERs relating to the sorption on two of the most important clay minerals present in natural systems have been established. Such an LFER approach is an extremely useful tool for estimating surface complexation constants for metals in a chemically consistent manner. It provides a means of obtaining sorption values for

  7. The Mental Health Recovery Movement and Family Therapy, Part II: A Collaborative, Appreciative Approach for Supporting Mental Health Recovery

    ERIC Educational Resources Information Center

    Gehart, Diane R.

    2012-01-01

    A continuation of Part I, which introduced mental health recovery concepts to family therapists, Part II of this article outlines a collaborative, appreciative approach for working in recovery-oriented contexts. This approach draws primarily upon postmodern therapies, which have numerous social justice and strength-based practices that are easily…

  8. Sexuality and Personal Relationships for People with an Intellectual Disability. Part II: Staff and Family Carer Perspectives

    ERIC Educational Resources Information Center

    Evans, D. S.; McGuire, B. E.; Healy, E.; Carley, S. N.

    2009-01-01

    Background: Recent ideological shifts in service provision promote appropriate sexual expression for people with an intellectual disability (ID), although there is little evidence that such advances in ideology are matched by current service provision. Part II of the current two-part study assessed the attitudes of staff and family carers to the…

  9. Learning Climate in Schools: Part II. Teacher Views of the Learning and Organizational Climate in Schools. Evaluation Brief.

    ERIC Educational Resources Information Center

    Cobb, Carolyn

    Part I of the Learning Climate in Schools evaluation brief looked at violence and disruptive behavior in the North Carolina public schools from several perspectives, including that of teachers expressed in an annual survey. Part II examines teacher perceptions of learning and organizational climates using another set of teacher responses to the…

  10. Psychoeducational Interventions with Pediatric Cancer Patients: Part II. Effects of Information and Skills Training on Health-Related Outcomes

    ERIC Educational Resources Information Center

    Beale, Ivan L.; Bradlyn, Andrew S.; Kato, Pamela M.

    2003-01-01

    In Part I of this paper, we described a model that was used as a framework for reviewing studies of psychoeducational interventions intended to influence illness- and treatment-related behaviors and attitudes in pediatric cancer patients. In Part II, we distinguish between interventions that attempt to influence patients' behaviors just by…

  11. Nickel(II), copper(II) and zinc(II) metallo-intercalators: structural details of the DNA-binding by a combined experimental and computational investigation.

    PubMed

    Lauria, Antonino; Bonsignore, Riccardo; Terenzi, Alessio; Spinello, Angelo; Giannici, Francesco; Longo, Alessandro; Almerico, Anna Maria; Barone, Giampaolo

    2014-04-28

    We present a thorough characterization of the interaction of novel nickel(II) (1), copper(II) (2) and zinc(II) (3) Schiff base complexes with native calf thymus DNA (ct-DNA), in buffered aqueous solution at pH 7.5. UV-vis absorption, circular dichroism (CD) and viscometry titrations provided clear evidence of the intercalative mechanism of the three square-planar metal complexes, allowing us to determine the intrinsic DNA-binding constants (K(b)), equal to 1.3 × 10(7), 2.9 × 10(6), and 6.2 × 10(5) M(-1) for 1, 2 and 3, respectively. Preferential affinity, of one order of magnitude, toward AT compared to GC base pair sequences was detected by UV-vis absorption titrations of 1 with [poly(dG-dC)]2 and [poly(dA-dT)]2. Structural details of the intercalation site of the three metal complexes within [dodeca(dA-dT)]2 were obtained by molecular dynamics (MD) simulations followed by density functional theory/molecular mechanics (DFT/MM) calculations. The calculations revealed that three major intermolecular interactions contribute to the strong affinity between DNA and the three metal complexes: (1) the electrostatic attraction between the two positively charged triethylammoniummethyl groups of the metal complexes and the negatively charged phosphate groups of the DNA backbone; (2) the intercalation of the naphthalene moiety within the four nitrogen bases of the intercalation site; (3) the metal coordination by exocyclic donor atoms of the bases, specifically the carbonyl oxygen and amine nitrogen atoms. Remarkably, the Gibbs formation free energy calculated for the intercalation complexes of 1, 2 and 3 with [dodeca(dA-dT)]2 in the implicit water solution is in agreement with the experimental Gibbs free energy values obtained from the DNA-binding constants as ΔG° = -RT ln(K(b)). In particular, the DNA-binding affinity trend, 1 > 2 > 3, is reproduced. Finally, the first shell coordination distances calculated for the intercalation complex 3/[dodeca(dA-dT)]2 are in

  12. Third-space fluid shift in elderly patients undergoing gastrointestinal surgery: Part II: nursing assessment.

    PubMed

    Wotton, Karen; Redden, Maurine

    2002-08-01

    Third-space fluid shift is the mobilisation of body fluid to a non-contributory space rendering it unavailable to the circulatory system. It is a recurrent clinical phenomenon requiring swift identification to minimise deleterious effects. Nurses experience difficulties however in its early identification, diagnosis and subsequent treatment because of the lack of consensual and consistent information regarding third-spacing. This article, part II, building on the previous article, explores the clinical validly and reliability of signs and symptoms of both phases of third-space fluid shift. In addition it reinforces the use multiple patient assessment cues if nurses are to differentiate between, and accurately respond to, the various causes of both hypovolaemia and hypervolaemia. It assists nurses to increase their knowledge and uderstanding of third-space fluid shift in patients undergoing gastrointestinal surgery.

  13. Putting microbes to work: dairy fermentation, cell factories and bioactive peptides. Part II: bioactive peptide functions.

    PubMed

    Hayes, Maria; Stanton, Catherine; Fitzgerald, Gerald F; Ross, R Paul

    2007-04-01

    A variety of milk-derived biologically active peptides have been shown to exert both functional and physiological roles in vitro and in vivo, and because of this are of particular interest for food science and nutrition applications. Biological activities associated with such peptides include immunomodulatory, antibacterial, anti-hypertensive and opioid-like properties. Milk proteins are recognized as a primary source of bioactive peptides, which can be encrypted within the amino acid sequence of dairy proteins, requiring proteolysis for release and activation. Fermentation of milk proteins using the proteolytic systems of lactic acid bacteria is an attractive approach for generation of functional foods enriched in bioactive peptides given the low cost and positive nutritional image associated with fermented milk drinks and yoghurt. In Part II of this review, we focus on examples of milk-derived bioactive peptides and their associated health benefits, to illustrate the potential of this area for the design and improvement of future functional foods.

  14. Repository Planning, Design, and Engineering: Part II-Equipment and Costing.

    PubMed

    Baird, Phillip M; Gunter, Elaine W

    2016-08-01

    Part II of this article discusses and provides guidance on the equipment and systems necessary to operate a repository. The various types of storage equipment and monitoring and support systems are presented in detail. While the material focuses on the large repository, the requirements for a small-scale startup are also presented. Cost estimates and a cost model for establishing a repository are presented. The cost model presents an expected range of acquisition costs for the large capital items in developing a repository. A range of 5,000-7,000 ft(2) constructed has been assumed, with 50 frozen storage units, to reflect a successful operation with growth potential. No design or engineering costs, permit or regulatory costs, or smaller items such as the computers, software, furniture, phones, and barcode readers required for operations have been included.

  15. Implementing AORN recommended practices for a safe environment of care, part II.

    PubMed

    Kennedy, Lynne

    2014-09-01

    Construction in and around a working perioperative suite is a challenge beyond merely managing traffic patterns and maintaining the sterile field. The AORN "Recommended practices for a safe environment of care, part II" provides guidance on building design; movement of patients, personnel, supplies, and equipment; environmental controls; safety and security; and control of noise and distractions. Whether the OR suite evolves through construction, reconstruction, or remodeling, a multidisciplinary team of construction experts and health care professionals should create a functional plan and communicate at every stage of the project to maintain a safe environment and achieve a well-designed outcome. Emergency preparedness, a facility-wide security plan, and minimization of noise and distractions in the OR also help enhance the safety of the perioperative environment.

  16. Periodontal Research: Basics and beyond – Part II (Ethical issues, sampling, outcome measures and bias)

    PubMed Central

    Avula, Haritha

    2013-01-01

    A good research beginning refers to formulating a well-defined research question, developing a hypothesis and choosing an appropriate study design. The first part of the review series has discussed these issues in depth and this paper intends to throw light on other issues pertaining to the implementation of research. These include the various ethical norms and standards in human experimentation, the eligibility criteria for the participants, sampling methods and sample size calculation, various outcome measures that need to be defined and the biases that can be introduced in research. PMID:24174747

  17. Traveling-wave piezoelectric linear motor part II: experiment and performance evaluation.

    PubMed

    Ting, Yung; Li, Chun-Chung; Chen, Liang-Chiang; Yang, Chieh-Min

    2007-04-01

    This article continues the discussion of a traveling-wave piezoelectric linear motor. Part I of this article dealt with the design and analysis of the stator of a traveling-wave piezoelectric linear motor. In this part, the discussion focuses on the structure and modeling of the contact layer and the carriage. In addition, the performance analysis and evaluation of the linear motor also are dealt with in this study. The traveling wave is created by stator, which is constructed by a series of bimorph actuators arranged in a line and connected to form a meander-line structure. Analytical and experimental results of the performance are presented and shown to be almost in agreement. Power losses due to friction and transmission are studied and found to be significant. Compared with other types of linear motors, the motor in this study is capable of supporting heavier loads and provides a larger thrust force.

  18. Liquid metal reactor deactivation as applied to the experimental breeder reactor - II.

    SciTech Connect

    Earle, O. K.; Michelbacher, J. A.; Pfannenstiel, D. F.; Wells, P. B.

    1999-05-28

    The Experimental Breeder Reactor-II (EBR-II) at Argonne National Laboratory-West (ANL-W) was shutdown in September, 1994. This sodium cooled reactor had been in service since 1964, and by the US Department of Energy (DOE) mandate, was to be placed in an industrially and radiologically safe condition for ultimate decommissioning. The deactivation of a liquid metal reactor presents unique concerns. The first major task associated with the project was the removal of all fueled assemblies. In addition, sodium must be drained from systems and processed for ultimate disposal. Residual quantities of sodium remaining in systems must be deactivated or inerted to preclude future hazards associated with pyrophoricity and generation of potentially explosive hydrogen gas. A Sodium Process Facility (SPF) was designed and constructed to react the elemental sodium from the EBR-II primary and secondary systems to sodium hydroxide for disposal. This facility has a design capacity to allow the reaction of the complete inventory of sodium at ANL-W in less than two years. Additional quantities of sodium from the Fermi-1 reactor are also being treated at the SPF.

  19. Formation of As(II)-pyrite during experimental replacement of magnetite under hydrothermal conditions

    NASA Astrophysics Data System (ADS)

    Qian, Gujie; Brugger, Joël; Testemale, Denis; Skinner, William; Pring, Allan

    2013-01-01

    A 'new' type of arsenian pyrite was formed during experimental replacement of magnetite under hydrothermal conditions (T = 125 and 220 °C; Psat) and in the presence of S(-II) and various As-containing species. The amount of As in pyrite depended on the As-source, with sources containing cationic As (As(II), As(III) and As(V)) resulting in considerably higher amounts of As in the product arsenian pyrite than anionic sources. The highest As content was 23.83 ± 0.20 wt%, corresponding to a S:Fe:As molar ratio of 2:0.58:0.42. Electron probe micro-analyses revealed an inverse correlation between the Fe and As contents in the arsenian pyrite, indicating that As is substituting for Fe. Arsenic concentrations were highly inhomogeneous within the pyrite rim; in general, higher As contents were found within solid pyrite growing on the outer rim, compared to the highly porous and texturally complex pyrite found close to the reaction boundary. This likely reflects different uptake mechanisms for As during the pyrite nucleation and growth stages. X-ray Absorption Near Edge Structure (XANES) analyses showed that the As in the arsenian pyrite was predominantly in the form of As(II). Cross-sectional X-ray photoelectron spectroscopy (XPS) analysis of the arsenian pyrite confirmed the presence of As(II), but also showed evidence for more oxidized species (As(III) and As(V) oxides), as well as small amounts of polymeric As-As bonding. This indicates a large difference between As in the bulk (XANES measurements) and at the pyrite surface (XPS). Ab initio XANES calculations are consistent with As replacing Fe in pyrite in the form of As(II). Our experimental study suggests that the formal oxidation state of As in this type of arsenian pyrite is close to +2, and that in addition to fluid composition and oxidation state, the reaction path leading to pyrite formation plays a significant role in controlling the chemistry of arsenian pyrite.

  20. Experimental Infection of Domestic Pigs with African Swine Fever Virus Lithuania 2014 Genotype II Field Isolate.

    PubMed

    Gallardo, C; Soler, A; Nieto, R; Cano, C; Pelayo, V; Sánchez, M A; Pridotkas, G; Fernandez-Pinero, J; Briones, V; Arias, M

    2017-02-01

    An experimental infection was conducted to evaluate horizontal transmission, clinical, virological and humoral response induced in domestic pigs infected with African swine fever (ASF) genotype II virus circulating in 2014 into the European Union (EU). Ten naive pigs were placed in contact with eight pigs experimentally inoculated with the Lithuanian LT14/1490 ASF virus (ASFV) responsible for the first ASF case detected in wild boar in Lithuania in January 2014. Clinical examination and rectal temperature were recorded each day. Blood sampling from every animal was carried out twice weekly. Blood samples were examined for presence of ASF virus-specific antibodies and for determining the ASFV viral load. From the obtained results, it was concluded that the Lithuanian ASFV induced an acute disease which resulted in 94, 5% mortality. The disease was easily detected by real-time PCR prior to the onset of clinical signs and 33% of the animals seroconverted. All findings were in accordance with observations previously made in domestic pigs and wild boar when infected with ASF genotype II viruses characterized by a high virulence. One in-contact pig remained asymptomatic and survived the infection. The role of such animals in virus transmission would need further investigation.

  1. Experimental Products Development Team (EPDT) Supporting New AWIPS . Part 2; Capabilities

    NASA Technical Reports Server (NTRS)

    Burks, Jason E.

    2015-01-01

    In 2012, the Experimental Products Development Team (EPDT) was formed within NASA's Short-term Prediction Research and Transition (SPoRT) Center to create training for development of plug-ins to extend the National Weather Service (NWS) Advanced Weather Interactive Processing System (AWIPS) version 2. The broader atmospheric science community had a need for AWIPS II development training being created at SPoRT and EPDT was expanded to include other groups who were looking for training. Since the expansion of the group occurred, EPDT has provided AWIPS II development training to over thirty participants spanning a wide variety of groups such as NWS Systems Engineering Center, NWS Meteorological Development Laboratory, and several NOAA Cooperative Institutes. Participants within EPDT solidify their learning experience through hands-on learning and by participating in a "code-sprint" in which they troubleshoot existing and develop plug-ins. The hands-on learning workshop is instructor lead with participants completing exercises within the AWIPS II Development Environment. During the code sprints EPDT groups work on projects important to the community and have worked on various plug-ins such as an RGB image recipe creation tool, and an mPing (crowd sourced precipitation type reporting system) ingest and display. EPDT has developed a well-defined training regime which prepares participants to fully develop plug-ins for the extendible AWIPS II architecture from ingest to the display of new data. SPoRT has hosted 2 learning workshops and 1 code sprint over the last two years, and continues to build and shape the EPDT group based on feedback from previous workshops. The presentation will provide an overview of EPDT current and future activities, and best practices developed within EPDT.

  2. High fidelity studies of exploding foil initiator bridges, Part 1: Experimental method

    NASA Astrophysics Data System (ADS)

    Bowden, Mike; Neal, William

    2017-01-01

    Simulations of high voltage detonators, such as Exploding Bridgewire (EBW) and Exploding Foil Initiators (EFI), have historically been simple, often empirical, one-dimensional models capable of predicting parameters such as current, voltage and in the case of EFIs, flyer velocity. Correspondingly, experimental methods have in general been limited to the same parameters. With the advent of complex, first principles magnetohydrodynamic codes such as ALEGRA and ALE-MHD, it is now possible to simulate these components in three dimensions, predicting a much greater range of parameters than before. A significant improvement in experimental capability was therefore required to ensure these simulations could be adequately validated. In this first paper of a three part study, the experimental method for determining the current, voltage, flyer velocity and multi-dimensional profile of detonator components is presented. This improved capability, along with high fidelity simulations, offer an opportunity to gain a greater understanding of the processes behind the functioning of EBW and EFI detonators.

  3. Theory and Implementation of Nuclear Safety System Codes - Part II: System Code Closure Relations, Validation, and Limitations

    SciTech Connect

    Glenn A Roth; Fatih Aydogan

    2014-09-01

    This is Part II of two articles describing the details of thermal-hydraulic sys- tem codes. In this second part of the article series, the system code closure relationships (used to model thermal and mechanical non-equilibrium and the coupling of the phases) for the governing equations are discussed and evaluated. These include several thermal and hydraulic models, such as heat transfer coefficients for various flow regimes, two phase pressure correlations, two phase friction correlations, drag coefficients and interfacial models be- tween the fields. These models are often developed from experimental data. The experiment conditions should be understood to evaluate the efficacy of the closure models. Code verification and validation, including Separate Effects Tests (SETs) and Integral effects tests (IETs) is also assessed. It can be shown from the assessments that the test cases cover a significant section of the system code capabilities, but some of the more advanced reactor designs will push the limits of validation for the codes. Lastly, the limitations of the codes are discussed by considering next generation power plants, such as Small Modular Reactors (SMRs), analyz- ing not only existing nuclear power plants, but also next generation nuclear power plants. The nuclear industry is developing new, innovative reactor designs, such as Small Modular Reactors (SMRs), High-Temperature Gas-cooled Reactors (HTGRs) and others. Sub-types of these reactor designs utilize pebbles, prismatic graphite moderators, helical steam generators, in- novative fuel types, and many other design features that may not be fully analyzed by current system codes. This second part completes the series on the comparison and evaluation of the selected reactor system codes by discussing the closure relations, val- idation and limitations. These two articles indicate areas where the models can be improved to adequately address issues with new reactor design and development.

  4. Modeling powder encapsulation in dosator-based machines: II. Experimental evaluation.

    PubMed

    Khawam, Ammar; Schultz, Leon

    2011-12-15

    A theoretical model was previously derived to predict powder encapsulation in dosator-based machines. The theoretical basis of the model was discussed earlier. In this part; the model was evaluated experimentally using two powder formulations with substantially different flow behavior. Encapsulation experiments were performed using a Zanasi encapsulation machine under two sets of experimental conditions. Model predicted outcomes such as encapsulation fill weight and plug height were compared to those experimentally obtained. Results showed a high correlation between predicted and actual outcomes demonstrating the model's success in predicting the encapsulation of both formulations. The model is a potentially useful in silico analysis tool that can be used for capsule dosage form development in accordance to quality by design (QbD) principles.

  5. Geomagnetic Field Variations as Determined from Bulgarian Archaeomagnetic Data. Part II: The Last 8000 Years

    NASA Astrophysics Data System (ADS)

    Kovacheva, Mary; Jordanova, Neli; Karloukovski, Vassil

    The knowledge about past secular variations of the geomagnetic field is achieved on the basis of archaeomagnetic researches of which the Bulgarian studies form an extended data set. In Part I (Kovacheva and Toshkov, 1994), the methodology used in the Sofia palaeomagnetic laboratory was described and the secular variation curves for the last 2000 years were shown. In Part II (this paper), the basic characteristics of the prehistoric materials used in the archaeomagnetic studies are emphasised, particularly in the context of the rock magnetic studies used in connection with palaeointensity determinations. The results of magnetic anisotropy studies of the prehistoric ovens and other fired structures are summarised, including the anisotropy correction of the palaeointensity results for prehistoric materials, different from bricks and pottery. Curves of the direction and intensity of the geomagnetic field during the last 8000 years in Bulgaria are given. The available directional and intensity values have been used to calculate the variation curve of the virtual dipole moment (VDM) for the last 8000 years based on different time interval averages. The path of virtual geomagnetic pole (VGP) positions is discussed.

  6. Interactions between DNA and gemini surfactant: impact on gene therapy: part II.

    PubMed

    Ahmed, Taksim; Kamel, Amany O; Wettig, Shawn D

    2016-02-01

    Nonviral gene delivery, provides distinct treatment modalities for the inherited and acquired diseases, relies upon the encapsulation of a gene of interest, which is then ideally delivered to the target cells. Variations in the chemical structure of gemini surfactants and subsequent physicochemical characteristics of the gemini-based lipoplexes and their impact on efficient gene transfection were assessed in part I, which was published in first March 2016 issue of Nanomedicine (1103). In order to design an efficient vector using gemini surfactants, the interaction of the surfactant with DNA and other components of the delivery system must be characterized, and more critically, well understood. Such studies will help to understand how nonviral transfection complexes, in general, overcome various cellular barriers. The Langmuir-Blodgett monolayer studies, atomic force microscopy, differential scanning calorimetry, isothermal titration calorimetry, small-angle x-ray scattering, are extensively used to evaluate the interaction behavior of gemini surfactants with DNA and other vector components. Part II of this review focuses on the use of these unique techniques to understand their interaction with DNA.

  7. Diagnosing DSM-IV--Part II: Eysenck (1986) and the essentialist fallacy.

    PubMed

    Wakefield, J C

    1997-07-01

    In Part I (Wakefield, 1997, Behaviour Research and Therapy, 35, 633-649) of this two-article series, I used the harmful dysfunction analysis of the concept of disorder (Wakefield, 1992a, American Psychologist, 47, 373-388) to 'diagnose' a problem with DSM-IV. I argued that DSM-IV diagnostic criteria often violate the 'dysfunction' requirement by invalidity classifying harms not caused by dysfunctions as disorders. In Part II, I examine Eysenck's (Eysenck, 1986, Contemporary directions in psychopathology: Toward the DSM-IV) argument that DSM commits a 'categorical fallacy' and should be replaced by dimensional diagnoses based on Eysenckian personality traits. I argue that Eysenck's proposed diagnostic criteria violate the 'harm' requirement by invalidly classifying symptomless conditions as disorders. Eysenck commits an 'essentialist fallacy'; he misconstrues 'disorder' as an essentialist theoretical concept when in fact it is a hybrid theoretical-practical or 'cause-effect' concept. He thus ignores the harmful effects essential to disorder that are captured in DSM's symptom-based categories.

  8. Pharmacokinetics, Pharmacodynamics, and Pharmacogenomics of Immunosuppressants in Allogeneic Hematopoietic Cell Transplantation: Part II.

    PubMed

    McCune, Jeannine S; Bemer, Meagan J; Long-Boyle, Janel

    2016-05-01

    Part I of this article included a pertinent review of allogeneic hematopoietic cell transplantation (alloHCT), the role of postgraft immunosuppression in alloHCT, and the pharmacokinetics, pharmacodynamics, and pharmacogenomics of the calcineurin inhibitors and methotrexate. In this article (Part II), we review the pharmacokinetics, pharmacodynamics, and pharmacogenomics of mycophenolic acid (MPA), sirolimus, and the antithymocyte globulins (ATG). We then discuss target concentration intervention (TCI) of these postgraft immunosuppressants in alloHCT patients, with a focus on current evidence for TCI and on how TCI may improve clinical management in these patients. Currently, TCI using trough concentrations is conducted for sirolimus in alloHCT patients. Several studies demonstrate that MPA plasma exposure is associated with clinical outcomes, with an increasing number of alloHCT patients needing TCI of MPA. Compared with MPA, there are fewer pharmacokinetic/dynamic studies of rabbit ATG and horse ATG in alloHCT patients. Future pharmacokinetic/dynamic research of postgraft immunosuppressants should include '-omics'-based tools: pharmacogenomics may be used to gain an improved understanding of the covariates influencing pharmacokinetics as well as proteomics and metabolomics as novel methods to elucidate pharmacodynamic responses.

  9. Interview-Based Qualitative Research in Emergency Care Part II: Data Collection, Analysis and Results Reporting

    PubMed Central

    Ranney, Megan L.; Meisel, Zachary; Choo, Esther K.; Garro, Aris; Sasson, Comilla; Morrow, Kathleen

    2015-01-01

    Qualitative methods are increasingly being used in emergency care research. Rigorous qualitative methods can play a critical role in advancing the emergency care research agenda by allowing investigators to generate hypotheses, gain an in-depth understanding of health problems or specific populations, create expert consensus, and develop new intervention and dissemination strategies. In Part I of this two-article series, we provided an introduction to general principles of applied qualitative health research and examples of its common use in emergency care research, describing study designs and data collection methods most relevant to our field (observation, individual interviews, and focus groups). Here in Part II of this series, we outline the specific steps necessary to conduct a valid and reliable qualitative research project, with a focus on interview-based studies. These elements include building the research team, preparing data collection guides, defining and obtaining an adequate sample, collecting and organizing qualitative data, and coding and analyzing the data. We also discuss potential ethical considerations unique to qualitative research as it relates to emergency care research. PMID:26284572

  10. Fracture prediction for the proximal femur using finite element models: Part II--Nonlinear analysis.

    PubMed

    Lotz, J C; Cheal, E J; Hayes, W C

    1991-11-01

    In Part I we reported the results of linear finite element models of the proximal femur generated using geometric and constitutive data collected with quantitative computed tomography. These models demonstrated excellent agreement with in vitro studies when used to predict ultimate failure loads. In Part II, we report our extension of those finite element models to include nonlinear behavior of the trabecular and cortical bone. A highly nonlinear material law, originally designed for representing concrete, was used for trabecular bone, while a bilinear material law was used for cortical bone. We found excellent agreement between the model predictions and in vitro fracture data for both the onset of bone yielding and bone fracture. For bone yielding, the model predictions were within 2 percent for a load which simulated one-legged stance and 1 percent for a load which simulated a fall. For bone fracture, the model predictions were within 1 percent and 17 percent, respectively. The models also demonstrated different fracture mechanisms for the two different loading configurations. For one-legged stance, failure within the primary compressive trabeculae at the subcapital region occurred first, leading to load transfer and, ultimately, failure of the surrounding cortical shell. However, for a fall, failure of the cortical and trabecular bone occurred simultaneously within the intertrochanteric region. These results support our previous findings that the strength of the subcapital region is primarily due to trabecular bone whereas the strength of the intertrochanteric region is primarily due to cortical bone.

  11. Interview-based Qualitative Research in Emergency Care Part II: Data Collection, Analysis and Results Reporting.

    PubMed

    Ranney, Megan L; Meisel, Zachary F; Choo, Esther K; Garro, Aris C; Sasson, Comilla; Morrow Guthrie, Kate

    2015-09-01

    Qualitative methods are increasingly being used in emergency care research. Rigorous qualitative methods can play a critical role in advancing the emergency care research agenda by allowing investigators to generate hypotheses, gain an in-depth understanding of health problems or specific populations, create expert consensus, and develop new intervention and dissemination strategies. In Part I of this two-article series, we provided an introduction to general principles of applied qualitative health research and examples of its common use in emergency care research, describing study designs and data collection methods most relevant to our field (observation, individual interviews, and focus groups). Here in Part II of this series, we outline the specific steps necessary to conduct a valid and reliable qualitative research project, with a focus on interview-based studies. These elements include building the research team, preparing data collection guides, defining and obtaining an adequate sample, collecting and organizing qualitative data, and coding and analyzing the data. We also discuss potential ethical considerations unique to qualitative research as it relates to emergency care research.

  12. State-of-the-art human gene therapy: part II. Gene therapy strategies and clinical applications.

    PubMed

    Wang, Dan; Gao, Guangping

    2014-09-01

    In Part I of this Review (Wang and Gao, 2014), we introduced recent advances in gene delivery technologies and explained how they have powered some of the current human gene therapy applications. In Part II, we expand the discussion on gene therapy applications, focusing on some of the most exciting clinical uses. To help readers to grasp the essence and to better organize the diverse applications, we categorize them under four gene therapy strategies: (1) gene replacement therapy for monogenic diseases, (2) gene addition for complex disorders and infectious diseases, (3) gene expression alteration targeting RNA, and (4) gene editing to introduce targeted changes in host genome. Human gene therapy started with the simple idea that replacing a faulty gene with a functional copy can cure a disease. It has been a long and bumpy road to finally translate this seemingly straightforward concept into reality. As many disease mechanisms unraveled, gene therapists have employed a gene addition strategy backed by a deep knowledge of what goes wrong in diseases and how to harness host cellular machinery to battle against diseases. Breakthroughs in other biotechnologies, such as RNA interference and genome editing by chimeric nucleases, have the potential to be integrated into gene therapy. Although clinical trials utilizing these new technologies are currently sparse, these innovations are expected to greatly broaden the scope of gene therapy in the near future.

  13. Population-based public health interventions: innovations in practice, teaching, and management. Part II.

    PubMed

    Keller, Linda Olson; Strohschein, Susan; Schaffer, Marjorie A; Lia-Hoagberg, Betty

    2004-01-01

    The Intervention Wheel is a population-based practice model that encompasses three levels of practice (community, systems, and individual/family) and 17 public health interventions. Each intervention and practice level contributes to improving population health. The Intervention Wheel, previously known as the Public Health Intervention Model, was originally introduced in 1998 by the Minnesota Department of Health, Section of Public Health Nursing (PHN). The model has been widely disseminated and used throughout the United States since that time. The evidence supporting the Intervention Wheel was recently subjected to a rigorous critique by regional and national experts. This critical process, which involved hundreds of public health nurses, resulted in a more robust Intervention Wheel and established the validity of the model. The critique also produced basic steps and best practices for each of the 17 interventions. Part I describes the Intervention Wheel, defines population-based practice, and details the recommended modifications and validation process. Part II provides examples of the innovative ways that the Intervention Wheel is being used in public health/PHN practice, education, and administration. The two articles provide a foundation and vision for population-based PHN practice and direction for improving population health.

  14. Advanced computational tools for PEM fuel cell design. Part 2. Detailed experimental validation and parametric study

    NASA Astrophysics Data System (ADS)

    Sui, P. C.; Kumar, S.; Djilali, N.

    This paper reports on the systematic experimental validation of a comprehensive 3D CFD-based computational model presented and documented in Part 1. Simulations for unit cells with straight channels, similar to the Ballard Mk902 hardware, are performed and analyzed in conjunction with detailed current mapping measurements and water mass distributions in the membrane-electrode assembly. The experiments were designed to display sensitivity of the cell over a range of operating parameters including current density, humidification, and coolant temperature, making the data particularly well suited for systematic validation. Based on the validation and analysis of the predictions, values of model parameters, including the electro-osmotic drag coefficient, capillary diffusion coefficient, and catalyst specific surface area are determined adjusted to fit experimental data of current density and MEA water content. The predicted net water flux out of the anode (normalized by the total water generated) increases as anode humidification water flow rate is increased, in agreement with experimental results. A modification of the constitutive equation for the capillary diffusivity of water in the porous electrodes that attempts to incorporate the experimentally observed immobile (or irreducible) saturation yields a better fit of the predicted MEA water mass with experimental data. The specific surface area parameter used in the catalyst layer model is found to be effective in tuning the simulations to predict the correct cell voltage over a range of stoichiometries.

  15. North Atlantic Simulations in Coordinated Ocean-Ice Reference Experiments Phase II (CORE-II) . Part II; Inter-Annual to Decadal Variability

    NASA Technical Reports Server (NTRS)

    Danabasoglu, Gokhan; Yeager, Steve G.; Kim, Who M.; Behrens, Erik; Bentsen, Mats; Bi, Daohua; Biastoch, Arne; Bleck, Rainer; Boening, Claus; Bozec, Alexandra; Canuto, Vittorio M.; Howard, Armando M.; Kelley, Maxwell

    2015-01-01

    Simulated inter-annual to decadal variability and trends in the North Atlantic for the 1958-2007 period from twenty global ocean - sea-ice coupled models are presented. These simulations are performed as contributions to the second phase of the Coordinated Ocean-ice Reference Experiments (CORE-II). The study is Part II of our companion paper (Danabasoglu et al., 2014) which documented the mean states in the North Atlantic from the same models. A major focus of the present study is the representation of Atlantic meridional overturning circulation (AMOC) variability in the participating models. Relationships between AMOC variability and those of some other related variables, such as subpolar mixed layer depths, the North Atlantic Oscillation (NAO), and the Labrador Sea upper-ocean hydrographic properties, are also investigated. In general, AMOC variability shows three distinct stages. During the first stage that lasts until the mid- to late-1970s, AMOC is relatively steady, remaining lower than its long-term (1958-2007) mean. Thereafter, AMOC intensifies with maximum transports achieved in the mid- to late-1990s. This enhancement is then followed by a weakening trend until the end of our integration period. This sequence of low frequency AMOC variability is consistent with previous studies. Regarding strengthening of AMOC between about the mid-1970s and the mid-1990s, our results support a previously identified variability mechanism where AMOC intensification is connected to increased deep water formation in the subpolar North Atlantic, driven by NAO-related surface fluxes. The simulations tend to show general agreement in their representations of, for example, AMOC, sea surface temperature (SST), and subpolar mixed layer depth variabilities. In particular, the observed variability of the North Atlantic SSTs is captured well by all models. These findings indicate that simulated variability and trends are primarily dictated by the atmospheric datasets which include

  16. North Atlantic simulations in Coordinated Ocean-ice Reference Experiments phase II (CORE-II). Part II: Inter-annual to decadal variability

    NASA Astrophysics Data System (ADS)

    Danabasoglu, Gokhan; Yeager, Steve G.; Kim, Who M.; Behrens, Erik; Bentsen, Mats; Bi, Daohua; Biastoch, Arne; Bleck, Rainer; Böning, Claus; Bozec, Alexandra; Canuto, Vittorio M.; Cassou, Christophe; Chassignet, Eric; Coward, Andrew C.; Danilov, Sergey; Diansky, Nikolay; Drange, Helge; Farneti, Riccardo; Fernandez, Elodie; Fogli, Pier Giuseppe; Forget, Gael; Fujii, Yosuke; Griffies, Stephen M.; Gusev, Anatoly; Heimbach, Patrick; Howard, Armando; Ilicak, Mehmet; Jung, Thomas; Karspeck, Alicia R.; Kelley, Maxwell; Large, William G.; Leboissetier, Anthony; Lu, Jianhua; Madec, Gurvan; Marsland, Simon J.; Masina, Simona; Navarra, Antonio; Nurser, A. J. George; Pirani, Anna; Romanou, Anastasia; Salas y Mélia, David; Samuels, Bonita L.; Scheinert, Markus; Sidorenko, Dmitry; Sun, Shan; Treguier, Anne-Marie; Tsujino, Hiroyuki; Uotila, Petteri; Valcke, Sophie; Voldoire, Aurore; Wang, Qiang; Yashayaev, Igor

    2016-01-01

    Simulated inter-annual to decadal variability and trends in the North Atlantic for the 1958-2007 period from twenty global ocean - sea-ice coupled models are presented. These simulations are performed as contributions to the second phase of the Coordinated Ocean-ice Reference Experiments (CORE-II). The study is Part II of our companion paper (Danabasoglu et al., 2014) which documented the mean states in the North Atlantic from the same models. A major focus of the present study is the representation of Atlantic meridional overturning circulation (AMOC) variability in the participating models. Relationships between AMOC variability and those of some other related variables, such as subpolar mixed layer depths, the North Atlantic Oscillation (NAO), and the Labrador Sea upper-ocean hydrographic properties, are also investigated. In general, AMOC variability shows three distinct stages. During the first stage that lasts until the mid- to late-1970s, AMOC is relatively steady, remaining lower than its long-term (1958-2007) mean. Thereafter, AMOC intensifies with maximum transports achieved in the mid- to late-1990s. This enhancement is then followed by a weakening trend until the end of our integration period. This sequence of low frequency AMOC variability is consistent with previous studies. Regarding strengthening of AMOC between about the mid-1970s and the mid-1990s, our results support a previously identified variability mechanism where AMOC intensification is connected to increased deep water formation in the subpolar North Atlantic, driven by NAO-related surface fluxes. The simulations tend to show general agreement in their temporal representations of, for example, AMOC, sea surface temperature (SST), and subpolar mixed layer depth variabilities. In particular, the observed variability of the North Atlantic SSTs is captured well by all models. These findings indicate that simulated variability and trends are primarily dictated by the atmospheric datasets which

  17. Transient PVT measurements and model predictions for vessel heat transfer. Part II.

    SciTech Connect

    Felver, Todd G.; Paradiso, Nicholas Joseph; Winters, William S., Jr.; Evans, Gregory Herbert; Rice, Steven F.

    2010-07-01

    Part I of this report focused on the acquisition and presentation of transient PVT data sets that can be used to validate gas transfer models. Here in Part II we focus primarily on describing models and validating these models using the data sets. Our models are intended to describe the high speed transport of compressible gases in arbitrary arrangements of vessels, tubing, valving and flow branches. Our models fall into three categories: (1) network flow models in which flow paths are modeled as one-dimensional flow and vessels are modeled as single control volumes, (2) CFD (Computational Fluid Dynamics) models in which flow in and between vessels is modeled in three dimensions and (3) coupled network/CFD models in which vessels are modeled using CFD and flows between vessels are modeled using a network flow code. In our work we utilized NETFLOW as our network flow code and FUEGO for our CFD code. Since network flow models lack three-dimensional resolution, correlations for heat transfer and tube frictional pressure drop are required to resolve important physics not being captured by the model. Here we describe how vessel heat transfer correlations were improved using the data and present direct model-data comparisons for all tests documented in Part I. Our results show that our network flow models have been substantially improved. The CFD modeling presented here describes the complex nature of vessel heat transfer and for the first time demonstrates that flow and heat transfer in vessels can be modeled directly without the need for correlations.

  18. Rare or remarkable microfungi from Oaxaca (south Mexico)--Part II.

    PubMed

    Ale-Agha, N; Jensen, M; Brassmann, M; Kautz, S; Eilmus, S; Ballhorn, D J

    2008-01-01

    Microfungi were collected in southern Mexico in the vicinity of Puerto Escondido, Oaxaca in 2007. In 2006, samples were gathered from Acacia myrmecophytes [(Remarkable microfungi from Oaxaca of Acacia species) Part I]. In the present investigation [Part II], we collected microfungi from different parts of a variety of wild and cultivated higher plants belonging to the families Anacardiaceae, Caricaceae, Fabaceae, Moraceae, and Nyctaginacae. The microfungi found here live as parasites or saprophytes. Interestingly, the species Colletotrichum lindemuthianum (Sacc. and Magn.) Briosi and Cavara has repeatedly been used to cause fungal infections of Phaseolus lunatus leaves in laboratory experiments. We could now find the same fungus as parasite on the same host plants under field conditions showing that results obtained in the laboratory are also relevant in nature. Most of the fungal species collected belong to the classes Ascomycotina, Basidiomycotina and Deuteromycotina. Until now, some of the microfungi identified in this study have been rarely observed before or have been reported for the first time in Mexico, for example: Pestalotia acaciae Thüm. on Acacia collinsii Safford; Corynespora cassiicola (Berk. and M.A. Curtis) C.T. Wei on Carica papaya L.; Botryosphaeria ribis Grossenb. and Duggar and Cercosporella leucaenae (Raghu Ram and Mallaiah) U. Braun (new for Mexico) and Camptomeris leucaenae (F. Stevens and Dalbey) Syd. (new for Mexico) on Leucaena leucocephala (Lam.) de Wit.; Oidium clitoriae Narayanas. and K. Ramakr. and Phakopsora cf. pachyrhizi Sydow and Sydow (new for Mexico) on Clitoria ternatea L.; Botryosphaeria obtusa (Schw.) Shoemaker on Prosopis juliflora (Sw.) DC.; Cylindrocladium scoparium Morg. on Ficus benjamina L.; Acremonium sp. on Bougainvillea sp. All specimens are located in the herbarium ESS. Mycotheca Parva collection G.B. Feige and N. Ale-Agha.

  19. Gunshot residue testing in suicides: Part II: Analysis by inductive coupled plasma-atomic emission spectrometry.

    PubMed

    Molina, D Kimberley; Castorena, Joe L; Martinez, Michael; Garcia, James; DiMaio, Vincent J M

    2007-09-01

    Several different methods can be employed to test for gunshot residue (GSR) on a decedent's hands, including scanning electron microscopy with energy dispersive x-ray (SEM/EDX) and inductive coupled plasma-atomic emission spectrometry (ICP-AES). In part I of this 2-part series, GSR results performed by SEM/EDX in undisputed cases of suicidal handgun wounds were studied. In part II, the same population was studied, deceased persons with undisputed suicidal handgun wounds, but GSR testing was performed using ICP-AES. A total of 102 cases were studied and analyzed for caliber of weapon, proximity of wound, and the results of the GSR testing. This study found that 50% of cases where the deceased was known to have fired a handgun immediately prior to death had positive GSR results by ICP/AES, which did not differ from the results of GSR testing by SEM/EDX. Since only 50% of cases where the person is known to have fired a weapon were positive for GSR by either method, this test should not be relied upon to determine whether someone has discharged a firearm and is not useful as a determining factor of whether or not a wound is self-inflicted or non-self-inflicted. While a positive GSR result may be of use, a negative result is not helpful in the medical examiner setting as a negative result indicates that either a person fired a weapon prior to death or a person did not fire a weapon prior to death.

  20. Carbonic Anhydrase Inhibitors. Part 461 Inhibition of Carbonic Anhydrase Isozymes I, II and IV With Trifluoromethylsulfonamide Derivatives and Their Zinc(II) and Copper(II) Complexes

    PubMed Central

    Mincione, Giovanna; Scozzafava, Andrea

    1997-01-01

    Reaction of aromatic/heterocyclic sulfonamides containing a free amino group with triflic anhydride afforded compounds possessing trifluoromethanesulfonamido moieties in their molecule. The Zn(II) and Cu(II) complexes of these new sulfonamides were prepared and characterized by standard procedures (elemental analysis, spectroscopic, magnetic, thermogravimetric and conductimetric measurements). The new derivatives showed good inhibitory activity against three isozymes of carbonic anhydrase (CA), i.e., CA I, II and IV. PMID:18475762

  1. Hydrodynamic Radii of Intrinsically Disordered Proteins Determined from Experimental Polyproline II Propensities.

    PubMed

    Tomasso, Maria E; Tarver, Micheal J; Devarajan, Deepa; Whitten, Steven T

    2016-01-01

    The properties of disordered proteins are thought to depend on intrinsic conformational propensities for polyproline II (PPII) structure. While intrinsic PPII propensities have been measured for the common biological amino acids in short peptides, the ability of these experimentally determined propensities to quantitatively reproduce structural behavior in intrinsically disordered proteins (IDPs) has not been established. Presented here are results from molecular simulations of disordered proteins showing that the hydrodynamic radius (Rh) can be predicted from experimental PPII propensities with good agreement, even when charge-based considerations are omitted. The simulations demonstrate that Rh and chain propensity for PPII structure are linked via a simple power-law scaling relationship, which was tested using the experimental Rh of 22 IDPs covering a wide range of peptide lengths, net charge, and sequence composition. Charge effects on Rh were found to be generally weak when compared to PPII effects on Rh. Results from this study indicate that the hydrodynamic dimensions of IDPs are evidence of considerable sequence-dependent backbone propensities for PPII structure that qualitatively, if not quantitatively, match conformational propensities measured in peptides.

  2. Electronic and optical response of functionalized Ru(II) complexes: joint theoretical and experimental study

    SciTech Connect

    Kilina, Svetlana; Tretiak, Sergei; Sykora, Milan; Albert, Victor; Badaeva, Ekaterina; Koposov, Alexey

    2008-01-01

    New photovoltaic and photocatalysis applications have been recently proposed based on the hybrid Ru(II)-bipyridine-complex/semiconductor quantum dot systems. In order to attach the Ru(II) complex to the surface of a semiconductor, a linking bridge -- a carboxyl group -- needs to be added to one or two of the 2,2'-bipyridine (bpy) ligands. Such changes in the ligand structure affect electronic and optical properties and, consequently, the charge transfer reactivity of Ru(II)-systems. In this study, we analyze the effects brought by functionalization of bipyridine ligands with the methyl, carboxyl, and carboxilate groups on the electronic structure and optical response of the [Ru(bpy){sub 3}]{sup 2+} complex. First principle calculations based on density functional theory (DFT) and time dependent DFT (TDDFT) are used to simulate the ground and excited-state properties, respectively, of functionalized Ru-complexes in the gas phase and acetonitrile solution. In addition, an effective Frenkel exciton model is used to explain the optical activity and splitting patterns of the low-energy excited states in all molecules. All theoretical results nicely complement and allow for detailed interpretation of experimental absorption spectra of Ru-complexes that have been done in parallel with our theoretical investigations. We found that the carboxyl group breaks the degeneracy of two low-energy optically bright excited states and red-shifts the absorption spectrum, while leaves ionization and affinity energies of complexes almost unchanged. Experimental studies show that deprotonation of the carboxyl group in the Ru-complexes results in a slight blue shift and decrease of oscillator strengths of the low energy absorption peaks. Comparison of experimental and theoretical linear response spectra of deprotonated complexes demonstrate strong agreement if the theoretical calculations are performed with the addition of a dielectric continuum model. A polar solvent is found to play an

  3. Systemic Pulsatile Pressure in Type II Endoleaks After Stent Grafting of Experimental Abdominal Aortic Aneurysms

    SciTech Connect

    Pitton, Michael Bernhard Schmenger, Patrick; Dueber, Christoph; Neufang, Achim; Thelen, Manfred

    2003-06-15

    Purpose: To investigate pressure and maximum rate of rise of systolic pressure (peak dP/dt) in completely excluded aneurysms and endoleaks to determine the hemodynamic impact of endoleaks. Methods: In mongrel dogs (n =36) experimental aneurysms were created by insertion of a patch (portion of rectus abdomen is muscle sheath) into the infrarenalaorta. In group I (n 18), all aortic branches of the aneurysm were ligated and all aneurysms were completely excluded by stent grafts. Group II (n = 18) consisted of aneurysms with patent aortic side branches that represented sources of endoleaks.One week (n = 12), six weeks (n = 12),and six months (n = 12) after stent grafting,hemodynamic measurements were obtained in thrombosed aneurysms and proved endoleaks. Systemic blood pressure and intraaneurysmal pressure were simultaneously measured and the respective peak dP/dt were computed. Results: At the six-month follow-up, the systolic-pressure ratio (intraaneurysmatic pressure: systemic pressure)was significantly increased in endoleaks compared to non-perfused areas(0.879 {+-} 0.042 versus 0.438 {+-} 0.176, p <0.01, group II) or completely excluded aneurysms (0.385 {+-}0.221, group I). Peak dP/dt ratio (intraaneurysmal peak dP/dt: systemic peak dP/dt) was 0.922 {+-} 0.154 in endoleaks, compared to 0.084 {+-} 0.080 in non-perfused areas (group II, p <0.01), and was 0.146 {+-} 0.121 in completely excluded aneurysms (group I). The diastolic-pressure ratio was also increased inendoleaks compared to non-perfused areas (0.929 {+-} 0.088 versus 0.655 {+-} 0.231, p < 0.01, group II) or completely excluded aneurysms (0.641 {+-} 0.278, group I). In excluded aneurysms, pressure exposure declined as the length of the follow-up period increased. Conclusion: Type II endoleaks transmit pulsatile pressure of near systemic level and indicate insufficient treatment result. In contrast, complete endovascular exclusion of aneurysms results in significantly reduced pressure exposure.

  4. On Flowfield Periodicity in the NASA Transonic Flutter Cascade. Part 1; Experimental Study

    NASA Technical Reports Server (NTRS)

    Lepicovsky, J.; McFarland, E. R.; Chima, R. V.; Wood, J. R.

    2000-01-01

    An extensive study to improve flow uniformity and periodicity in the NASA Transonic Flutter Cascade is presented here. The results are reported in two independent parts dealing with the experimental approach and the analytical approach. The first part, the Experimental Study, focuses first on the data sets acquired in this facility in the past and explains several discrepancies, particularly the questions of actual flow incidence and cascade back pressure levels. Next, available means for control and modifications of the cascade flowfield, boundary layer bleed and tailboard settings are presented in detail. This is followed by experimental data sets acquired in modified test facility configurations that were based on analytical predictions of the cascade flowfield. Finally, several important conclusions about improving the cascade flowfield uniformity and blade load periodicity are summarized. The important conclusions are: (1) boundary layer bleed does not improve the cascade flow periodicity; (2) tunnel wall contours must be carefully matched to the expected shape of cascade streamlines; (3) actual flow incidence for each cascade configuration rather must be measured instead of relying on the tunnel geometry; and (4) the current cascade configuration exhibits a very high blade load uniformity over six blades from blade #2 to blade #7, and the facility is now ready for unsteady pressure data acquisition.

  5. An experimental type II mixed cryoglobulinemia with renal glomerulopathy in ICR mice triggered by Capillaria hepatica infection.

    PubMed

    Aihara, Naoyuki; Chambers, James Kenn; Hosono, Kei; Kamiie, Junichi; Shirota, Kinji

    2011-12-01

    Type II mixed cryoglobulinemia is characterized by systemic vasculitis with deposition of cryoprecipitatable-immunoglobulins containing rheumatoid factor. Pathogenesis of type II mixed cryoglobulinemia has not yet been completely clarified because of the lack of an experimental animal. Here, we report an animal model of type II mixed cryoglobulinemia that is induced by experimental infection with Capillaria hepatica in ICR mice. Capillaria hepatica is a nematode that causes necrotic hepatitis in several mammals. In this study, mice experimentally infected with C. hepatica eggs developed cryoglobulinemia at 20 and 30 days post injection. Using immunological analysis, cryoglobulinemia in infected mice was classified as type II mixed cryoglobulinemia by detection of monoclonal IgM rheumatoid factor and IgA in the cryoprecipitate of serum. Using immunofluorescence, we observed an increase in the number of double-positive cells for µ heavy and κ light chains of immunoglobulin in the spleens of infected mice. Histopathologically, this model was characterized by glomerulopathy associated with intense deposition of IgM and IgA filling in capillary lumina. Ultrastructural analysis showed that glomerular deposits consisted of stacks of twisted microtubular structures. These serological and histological features resembled those of type II mixed cryoglobulinemia in human. This is the first experimental animal model of type II mixed cryoglobulinemia that will enable detailed studies on the pathogenesis of cryoglobulinemia.

  6. 40 CFR Appendix II to Part 1068 - Emission-Related Parameters and Specifications

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...) AIR POLLUTION CONTROLS GENERAL COMPLIANCE PROVISIONS FOR ENGINE PROGRAMS Pt. 1068, App. II Appendix II.... Compression ratio. 2. Type of air aspiration (natural, Roots-blown, supercharged, turbocharged). 3. Valves... bottom-dead center). II. Intake Air System. 1. Roots blower/supercharger/turbocharger calibration....

  7. Experimental diagenesis of organo-mineral structures formed by microaerophilic Fe(II)-oxidizing bacteria.

    PubMed

    Picard, Aude; Kappler, Andreas; Schmid, Gregor; Quaroni, Luca; Obst, Martin

    2015-02-18

    Twisted stalks are organo-mineral structures produced by some microaerophilic Fe(II)-oxidizing bacteria at O2 concentrations as low as 3 μM. The presence of these structures in rocks having experienced a diagenetic history could indicate microbial Fe(II)-oxidizing activity as well as localized abundance of oxygen at the time of sediment deposition. Here we use spectroscopy and analytical microscopy to evaluate if--and what kind of--transformations occur in twisted stalks through experimental diagenesis. Unique mineral textures appear on stalks as temperature and pressure conditions increase. Haematite and magnetite form from ferrihydrite at 170 °C-120 MPa. Yet the twisted morphology of the stalks, and the organic matrix, mainly composed of long-chain saturated aliphatic compounds, are preserved at 250 °C-140 MPa. Our results suggest that iron minerals might play a role in maintaining the structural and chemical integrity of stalks under diagenetic conditions and provide spectroscopic signatures for the search of ancient life in the rock record.

  8. High fidelity studies of exploding foil initiator bridges, Part 2: Experimental results

    NASA Astrophysics Data System (ADS)

    Neal, William; Bowden, Mike

    2017-01-01

    Simulations of high voltage detonators, such as Exploding Bridgewire (EBW) and Exploding Foil Initiators (EFI), have historically been simple, often empirical, one-dimensional models capable of predicting parameters such as current, voltage, and in the case of EFIs, flyer velocity. Experimental methods have correspondingly generally been limited to the same parameters. With the advent of complex, first principles magnetohydrodynamic codes such as ALEGRA MHD, it is now possible to simulate these components in three dimensions and predict greater range of parameters than before. A significant improvement in experimental capability was therefore required to ensure these simulations could be adequately verified. In this second paper of a three part study, data is presented from a flexible foil EFI header experiment. This study has shown that there is significant bridge expansion before time of peak voltage and that heating within the bridge material is spatially affected by the microstructure of the metal foil.

  9. Elasto-dynamic analysis of a gear pump-Part III: Experimental validation procedure and model extension to helical gears

    NASA Astrophysics Data System (ADS)

    Mucchi, E.; Dalpiaz, G.

    2015-01-01

    This work concerns external gear pumps for automotive applications, which operate at high speed and low pressure. In previous works of the authors (Part I and II, [1,2]), a non-linear lumped-parameter kineto-elastodynamic model for the prediction of the dynamic behaviour of external gear pumps was presented. It takes into account the most important phenomena involved in the operation of this kind of machine. The two main sources of noise and vibration are considered: pressure pulsation and gear meshing. The model has been used in order to foresee the influence of working conditions and design modifications on vibration generation. The model's experimental validation is a difficult task. Thus, Part III proposes a novel methodology for the validation carried out by the comparison of simulations and experimental results concerning forces and moments: it deals with the external and inertial components acting on the gears, estimated by the model, and the reactions and inertial components on the pump casing and the test plate, obtained by measurements. The validation is carried out comparing the level of the time synchronous average in the time domain and the waterfall maps in the frequency domain, with particular attention to identify system resonances. The validation results are satisfactory globally, but discrepancies are still present. Moreover, the assessed model has been properly modified for the application to a new virtual pump prototype with helical gears in order to foresee gear accelerations and dynamic forces. Part IV is focused on improvements in the modelling and analysis of the phenomena bound to the pressure evolution around the gears in order to achieve results closer to the measured values. As a matter of fact, the simulation results have shown that a variable meshing stiffness has a notable contribution on the dynamic behaviour of the pump but this is not as important as the pressure phenomena. As a consequence, the original model was modified with the

  10. Robust detection of gearbox deterioration using compromised autoregressive modeling and Kolmogorov Smirnov test statistic. Part II: Experiment and application

    NASA Astrophysics Data System (ADS)

    Zhan, Yimin; Mechefske, Chris K.

    2007-07-01

    Optimal maintenance decision analysis is heavily dependent on the accuracy of condition indicators. A condition indicator that is subject to such varying operating conditions as load is unable to provide precise condition information of the monitored object for making optimal operational maintenance decisions even if the maintenance program is established within a rigorous theoretical framework. For this reason, the performance of condition monitoring techniques applied to rotating machinery under varying load conditions has been a long-term concern and has attracted intensive research interest. Part I of this study proposed a novel technique based on adaptive autoregressive modeling and hypothesis tests. The method is able to automatically search for the optimal time-series model order and establish a compromised autoregressive model fitting based on the healthy gear motion residual signals under varying load conditions. The condition of the monitored gearbox is numerically represented by a modified Kolmogorov-Smirnov test statistic. Part II of this study is devoted to applications of the proposed technique to entire lifetime condition detection of three gearboxes with distinct physical specifications, distinct load conditions, and distinct failure modes. A comprehensive and thorough comparative study is conducted between the proposed technique and several counterparts. The detection technique is further enhanced by a proposed method to automatically identify and generate fault alerts with the aid of the Wilcoxon rank-sum test and thus requires no supervision from maintenance personnel. Experimental analysis demonstrated that the proposed technique applied to automatic identification and generation of fault alerts also features two highly desirable properties, i.e. few false alerts and early alert for incipient faults. Furthermore, it is found that the proposed technique is able to identify two types of abnormalities, i.e. strong ghost components abruptly

  11. Experimental Investigation of Laser Transmission Welding of Thermoplastics with Part-Adapted Temperature Fields

    NASA Astrophysics Data System (ADS)

    Devrient, M.; Kern, M.; Jaeschke, P.; Stute, U.; Haferkamp, H.; Schmidt, M.

    Laser transmission welding is known for high flexibility, extraordinary potential for process automation and outstanding weld seam properties. Problems may occur due to the poor gap-bridging capability of contour welding. Gaps of a few tens of microns can lead to processing issues such as welding failures, poor achievable process speed or low weld seam strengths. To overcome this, laser transmission welding with part-adapted temperature fields was developed, and is experimentally investigated here. Results concerning the process behavior, dependent on several oscillation types of the laser beam, as well as achieved tensile shear strengths and the monitored gap-bridging capability are presented.

  12. Dendritic Growth Morphologies in Al-Zn Alloys—Part II: Phase-Field Computations

    NASA Astrophysics Data System (ADS)

    Dantzig, J. A.; Di Napoli, Paolo; Friedli, J.; Rappaz, M.

    2013-12-01

    In Part I of this article, the role of the Zn content in the development of solidification microstructures in Al-Zn alloys was investigated experimentally using X-ray tomographic microscopy. The transition region between dendrites found at low Zn content and dendrites found at high Zn content was characterized by textured seaweed-type structures. This Dendrite Orientation Transition (DOT) was explained by the effect of the Zn content on the weak anisotropy of the solid-liquid interfacial energy of Al. In order to further support this interpretation and to elucidate the growth mechanisms of the complex structures that form in the DOT region, a detailed phase-field study exploring anisotropy parameters' space is presented in this paper. For equiaxed growth, our results essentially recapitulate those of Haxhimali et al.[1] in simulations for pure materials. We find distinct regions of the parameter space associated with and dendrites, separated by a region where hyperbranched dendrites are observed. In simulations of directional solidification, we find similar behavior at the extrema, but in this case, the anisotropy parameters corresponding to the hyperbranched region produce textured seaweeds. As noted in the experimental work reported in Part I, these structures are actually dendrites that prefer to grow misaligned with respect to the thermal gradient direction. We also show that in this region, the dendrites grow with a blunted tip that oscillates and splits, resulting in an oriented trunk that continuously emits side branches in other directions. We conclude by making a correlation between the alloy composition and surface energy anisotropy parameters.

  13. Characterisation and optimisation of flexible transfer lines for liquid helium. Part II: Thermohydraulic modelling

    NASA Astrophysics Data System (ADS)

    Dittmar, N.; Haberstroh, Ch.; Hesse, U.; Krzyzowski, M.

    2016-10-01

    In part one of this publication experimental results for a single-channel transfer line used at liquid helium (LHe) decant stations are presented. The transfer of LHe into mobile dewars is an unavoidable process since the places of storage and usage are generally located apart from each other. The experimental results have shown that reasonable amounts of LHe evaporate due to heat leak and pressure drop. Thus, generated helium cold gas has to be collected and reliquefied, demanding a huge amount of electrical energy. Although this transfer process is common in cryogenic laboratories, no existing code could be found to model it. Therefore, a thermohydraulic model has been developed to model the LHe flow at operating conditions using published heat transfer and pressure drop correlations. This paper covers the basic equations used to calculate heat transfer and pressure drop, as well as the validation of the thermohydraulic code, and its application within the optimisation process. The final transfer line design features reduced heat leak and pressure drop values based on a combined measurement and modelling campaign in the range of 0.112 < pin < 0.148 MPa, 190 < G < 450 kg/(m2 s), and 0.04 < xout < 0.12.

  14. The Danieli Inventory of Multigenerational Legacies of Trauma, Part II: Reparative Adaptational Impacts.

    PubMed

    Danieli, Yael; Norris, Fran H; Lindert, Jutta; Paisner, Vera; Kronenberg, Sefi; Engdahl, Brian; Richter, Julia

    2015-05-01

    The impacts of the Holocaust on children of survivors have been widely investigated. However, consensus is limited, and no validated measures have been tailored with or to them. We aimed to develop and validate a scale that measures these specific impacts (Part II of the Danieli Inventory of Multigenerational Legacies of Trauma). We studied 484 adult children of survivors who participated in a cross-sectional web-based survey in English or Hebrew; of these, 191 participated in a clinical interview. Exploratory factor analyses of 58 items to reduce and refine the measure yielded a 36-item scale, Reparative Adaptational Impacts, that had excellent internal consistency (α = .91) and congruence between English and Hebrew versions (φ ≥ .95). Associations between impacts and SCID-based diagnoses of major depressive episode, posttraumatic stress disorder, and generalized anxiety disorder were moderate to strong (ds = 0.48-0.89). Strong associations also emerged between severity of offspring's reparative adaptational impacts and intensity of their parents' posttrauma adaptational styles (Multiple R = .72), with intensity of victim style, especially the mother's, having the strongest effect (β = .31-.33). Having both research and clinical relevance for assessing Holocaust survivors' offspring, future studies might investigate the scale's generalizability to other populations affected by mass trauma.

  15. Correlative anatomy for the electrophysiologist, part II: cardiac ganglia, phrenic nerve, coronary venous system.

    PubMed

    Lachman, Nirusha; Syed, Faisal F; Habib, Ammar; Kapa, Suraj; Bisco, Susan E; Venkatachalam, K L; Asirvatham, Samuel J

    2011-01-01

    Cardiac Ganglia, Phrenic Nerve, Coronary Venous System. There is an increasing need for invasive electrophysiologists to appreciate the exact anatomy of the epicardial space and the coronary veins. The location of the epicardial fat, the complementary relationship with the main cardiac veins, and the location of sensitive structures (arteries, phrenic nerve, esophagus) have become required knowledge for electrophysiologists, and accessing the epicardial space with this thorough knowledge of the pericardial sinuses and recesses is essential to allow radiographic correlation during catheter manipulation. In this review, we briefly describe the anatomy of the pericardial space and then discuss the specific correlation for the invasive electrophysiologist, highlighting epicardial access, catheter navigation, and avoidance of collateral injury, with specific attention to the important recesses of the pericardial space, their regional anatomy, and radiographic correlation when navigating catheters to these locations. We also discuss the anatomy of the main cardiac veins in the context of catheter mapping and ablation of the epicardial substrate through the venous system and without subxiphoid pericardial access. In part II of this series we discuss the detailed regional anatomy of the cardiac ganglia, phrenic nerve, and coronary venous system.

  16. Structural interfaces in linear elasticity. Part II: Effective properties and neutrality

    NASA Astrophysics Data System (ADS)

    Bertoldi, K.; Bigoni, D.; Drugan, W. J.

    2007-01-01

    The model of structural interfaces developed in Part I of this paper allows us to analytically attack and solve different problems of stress concentration and composites. In particular, (i) new formulae are given for effective properties of composite materials containing dilute suspensions of (randomly oriented) reinforced elliptical voids or inclusions; (ii) a new definition is proposed for inclusion neutrality (to account for the fact that the matrix is always 'overstressed', and thus non-neutral in a classical sense, at the contacts with the interfacial structure), which is shown to provide interesting stress optimality conditions. More generally, it is shown that the incorporation of an interfacial structure at the contact between two elastic solids exhibits properties that cannot be obtained using the more conventional approach of the zero-thickness, linear interface. For instance: contrary to the zero-thickness interface, both bulk and shear effective moduli can be optimized for a structural interface; effective properties higher that those possible with a perfect interface can be attained with a structural interface; and neutrality holds with a structural interface for a substantially broader range of parameters than for a zero-thickness interface.

  17. Testing and Analysis of a Composite Non-Cylindrical Aircraft Fuselage Structure . Part II; Severe Damage

    NASA Technical Reports Server (NTRS)

    Przekop, Adam; Jegley, Dawn C.; Lovejoy, Andrew E.; Rouse, Marshall; Wu, Hsi-Yung T.

    2016-01-01

    The Environmentally Responsible Aviation Project aimed to develop aircraft technologies enabling significant fuel burn and community noise reductions. Small incremental changes to the conventional metallic alloy-based 'tube and wing' configuration were not sufficient to achieve the desired metrics. One airframe concept identified by the project as having the potential to dramatically improve aircraft performance was a composite-based hybrid wing body configuration. Such a concept, however, presented inherent challenges stemming from, among other factors, the necessity to transfer wing loads through the entire center fuselage section which accommodates a pressurized cabin confined by flat or nearly flat panels. This paper discusses a finite element analysis and the testing of a large-scale hybrid wing body center section structure developed and constructed to demonstrate that the Pultruded Rod Stitched Efficient Unitized Structure concept can meet these challenging demands of the next generation airframes. Part II of the paper considers the final test to failure of the test article in the presence of an intentionally inflicted severe discrete source damage under the wing up-bending loading condition. Finite element analysis results are compared with measurements acquired during the test and demonstrate that the hybrid wing body test article was able to redistribute and support the required design loads in a severely damaged condition.

  18. Reproduction in the space environment: Part II. Concerns for human reproduction

    NASA Technical Reports Server (NTRS)

    Jennings, R. T.; Santy, P. A.

    1990-01-01

    Long-duration space flight and eventual colonization of our solar system will require successful control of reproductive function and a thorough understanding of factors unique to space flight and their impact on gynecologic and obstetric parameters. Part II of this paper examines the specific environmental factors associated with space flight and the implications for human reproduction. Space environmental hazards discussed include radiation, alteration in atmospheric pressure and breathing gas partial pressures, prolonged toxicological exposure, and microgravity. The effects of countermeasures necessary to reduce cardiovascular deconditioning, calcium loss, muscle wasting, and neurovestibular problems are also considered. In addition, the impact of microgravity on male fertility and gamete quality is explored. Due to current constraints, human pregnancy is now contraindicated for space flight. However, a program to explore effective countermeasures to current constraints and develop the required health care delivery capability for extended-duration space flight is suggested. A program of Earth- and space-based research to provide further answers to reproductive questions is suggested.

  19. Nanoparticle mass transfer from lung airways to systemic regions--Part II: Multi-compartmental modeling.

    PubMed

    Kolanjiyil, Arun V; Kleinstreuer, Clement

    2013-12-01

    This is the second article of a two-part paper, combining high-resolution computer simulation results of inhaled nanoparticle deposition in a human airway model (Kolanjiyil and Kleinstreuer, 2013, "Nanoparticle Mass Transfer From Lung Airways to Systemic Regions--Part I: Whole-Lung Aerosol Dynamics," ASME J. Biomech. Eng., 135(12), p. 121003) with a new multicompartmental model for insoluble nanoparticle barrier mass transfer into systemic regions. Specifically, it allows for the prediction of temporal nanoparticle accumulation in the blood and lymphatic systems and in organs. The multicompartmental model parameters were determined from experimental retention and clearance data in rat lungs and then the validated model was applied to humans based on pharmacokinetic cross-species extrapolation. This hybrid simulator is a computationally efficient tool to predict the nanoparticle kinetics in the human body. The study provides critical insight into nanomaterial deposition and distribution from the lungs to systemic regions. The quantitative results are useful in diverse fields such as toxicology for exposure-risk analysis of ubiquitous nanomaterial and pharmacology for nanodrug development and targeting.

  20. Open-source MFIX-DEM software for gas-solids flows: Part II Validation studies

    SciTech Connect

    Li, Tingwen; Garg, Rahul; Galvin, Janine; Pannala, Sreekanth

    2012-01-01

    With rapid advancements in computer hardware and numerical algorithms, computational fluid dynamics (CFD) has been increasingly employed as a useful tool for investigating the complex hydrodynamics inherent in multiphase flows. An important step during the development of a CFD model and prior to its application is conducting careful and comprehensive verification and validation studies. Accordingly, efforts to verify and validate the open-source MFIX-DEM software, which can be used for simulating the gas solids flow using an Eulerian reference frame for the continuum fluid and a Lagrangian discrete framework (Discrete Element Method) for the particles, have been made at the National Energy Technology Laboratory (NETL). In part I of this paper, extensive verification studies were presented and in this part, detailed validation studies of MFIX-DEM are presented. A series of test cases covering a range of gas solids flow applications were conducted. In particular the numerical results for the random packing of a binary particle mixture, the repose angle of a sandpile formed during a side charge process, velocity, granular temperature, and voidage profiles from a bounded granular shear flow, lateral voidage and velocity profiles from a monodisperse bubbling fluidized bed, lateral velocity profiles from a spouted bed, and the dynamics of segregation of a binary mixture in a bubbling bed were compared with available experimental data, and in some instances with empirical correlations. In addition, sensitivity studies were conducted for various parameters to quantify the error in the numerical simulation.

  1. Open-Source MFIX-DEM Software for Gas-Solids Flows: Part II - Validation Studies

    SciTech Connect

    Li, Tingwen

    2012-04-01

    With rapid advancements in computer hardware and numerical algorithms, computational fluid dynamics (CFD) has been increasingly employed as a useful tool for investigating the complex hydrodynamics inherent in multiphase flows. An important step during the development of a CFD model and prior to its application is conducting careful and comprehensive verification and validation studies. Accordingly, efforts to verify and validate the open-source MFIX-DEM software, which can be used for simulating the gas–solids flow using an Eulerian reference frame for the continuum fluid and a Lagrangian discrete framework (Discrete Element Method) for the particles, have been made at the National Energy Technology Laboratory (NETL). In part I of this paper, extensive verification studies were presented and in this part, detailed validation studies of MFIX-DEM are presented. A series of test cases covering a range of gas–solids flow applications were conducted. In particular the numerical results for the random packing of a binary particle mixture, the repose angle of a sandpile formed during a side charge process, velocity, granular temperature, and voidage profiles from a bounded granular shear flow, lateral voidage and velocity profiles from a monodisperse bubbling fluidized bed, lateral velocity profiles from a spouted bed, and the dynamics of segregation of a binary mixture in a bubbling bed were compared with available experimental data, and in some instances with empirical correlations. In addition, sensitivity studies were conducted for various parameters to quantify the error in the numerical simulation.

  2. Dicopper(II) metallacyclophanes as multifunctional magnetic devices: a joint experimental and computational study.

    PubMed

    Castellano, María; Ruiz-García, Rafael; Cano, Joan; Ferrando-Soria, Jesús; Pardo, Emilio; Fortea-Pérez, Francisco R; Stiriba, Salah-Eddine; Julve, Miguel; Lloret, Francesc

    2015-03-17

    Metallosupramolecular complexes constitute an important advance in the emerging fields of molecular spintronics and quantum computation and a useful platform in the development of active components of spintronic circuits and quantum computers for applications in information processing and storage. The external control of chemical reactivity (electro- and photochemical) and physical properties (electronic and magnetic) in metallosupramolecular complexes is a current challenge in supramolecular coordination chemistry, which lies at the interface of several other supramolecular disciplines, including electro-, photo-, and magnetochemistry. The specific control of current flow or spin delocalization through a molecular assembly in response to one or many input signals leads to the concept of developing a molecule-based spintronics that can be viewed as a potential alternative to the classical molecule-based electronics. A great variety of factors can influence over these electronically or magnetically coupled, metallosupramolecular complexes in a reversible manner, electronic or photonic external stimuli being the most promising ones. The response ability of the metal centers and/or the organic bridging ligands to the application of an electric field or light irradiation, together with the geometrical features that allow the precise positioning in space of substituent groups, make these metal-organic systems particularly suitable to build highly integrated molecular spintronic circuits. In this Account, we describe the chemistry and physics of dinuclear copper(II) metallacyclophanes with oxamato-containing dinucleating ligands featuring redox- and photoactive aromatic spacers. Our recent works on dicopper(II) metallacyclophanes and earlier ones on related organic cyclophanes are now compared in a critical manner. Special focus is placed on the ligand design as well as in the combination of experimental and computational methods to demonstrate the multifunctionality

  3. Coordinator(a) de Servicios Clinicos. Parte I (Unidad I-IV). Parte II (Unidad V-VI). Guia. Documento de Trabajo (Clinical Services Coordinator. Part I. Units I-IV. Part II. Units V-VI. Guide. Working Document).

    ERIC Educational Resources Information Center

    Puerto Rico State Dept. of Education, Hato Rey. Area for Vocational and Technical Education.

    This guide is intended for instructing secondary students in the occupation of clinical services coordinator in a hospital. The first part contains four units on the following subjects: the occupation of clinical services coordinator; interpersonal relationships; ethical/legal aspects; and communications (telephone, intercom, and others). For each…

  4. Centrifugal slurry pump wear and hydraulic studies. Phase II report. Experimental studies

    SciTech Connect

    Mistry, D.; Cooper, P.; Biswas, C.; Sloteman, D.; Onuschak, A.

    1983-01-01

    This report describes the work performed by Ingersoll-Rand Research, Inc., under Phase II, Experimental Studies for the contract entitled, Centrifugal Slurry Pump Wear and Hydraulic Studies. This work was carried out for the US Department of Energy under Contract No. DE-AC-82PC50035. The basic development approach pursued this phase is presented, followed by a discussion on wear relationships. The analysis, which resulted in the development of a mathematical wear model relating pump life to some of the key design and operating parameters, is presented. The results, observations, and conclusions of the experimental investigation on small scale pumps that led to the selected design features for the prototype pump are discussed. The material investigation was performed at IRRI, ORNL and Battelle. The rationale for selecting the materials for testing, the test methods and apparatus used, and the results obtained are presented followed by a discussion on materials for a prototype pump. In addition, the prototype pump test facility description, as well as the related design and equipment details, are presented. 20 references, 53 figures, 13 tables.

  5. Case Control Study of Type II Decompression Sickness Associated with Patent Foramen Ovale in Experimental No-Decompression Dives

    DTIC Science & Technology

    2010-05-01

    Navy Experimental Diving Unit 321 Bullfinch Rd. Panama City, FL 32407-7015 TA 07-08 NEDU TR 10-07 May 2010 CASE CONTROL STUDY OF TYPE II...08 NO. 11. TITLE (Include Security Classification) (U) Case Control Study of Type II Decompression Sickness Associated with Patent Foramen Ovale in...Unit, NEDU 19. ABSTRACT (Continue on reverse if necessary and identify by block number) This is a retrospective case control study comparing

  6. Towards multi-resolution global climate modeling with ECHAM6-FESOM. Part II: climate variability

    NASA Astrophysics Data System (ADS)

    Rackow, T.; Goessling, H. F.; Jung, T.; Sidorenko, D.; Semmler, T.; Barbi, D.; Handorf, D.

    2016-06-01

    This study forms part II of two papers describing ECHAM6-FESOM, a newly established global climate model with a unique multi-resolution sea ice-ocean component. While part I deals with the model description and the mean climate state, here we examine the internal climate variability of the model under constant present-day (1990) conditions. We (1) assess the internal variations in the model in terms of objective variability performance indices, (2) analyze variations in global mean surface temperature and put them in context to variations in the observed record, with particular emphasis on the recent warming slowdown, (3) analyze and validate the most common atmospheric and oceanic variability patterns, (4) diagnose the potential predictability of various climate indices, and (5) put the multi-resolution approach to the test by comparing two setups that differ only in oceanic resolution in the equatorial belt, where one ocean mesh keeps the coarse ~1° resolution applied in the adjacent open-ocean regions and the other mesh is gradually refined to ~0.25°. Objective variability performance indices show that, in the considered setups, ECHAM6-FESOM performs overall favourably compared to five well-established climate models. Internal variations of the global mean surface temperature in the model are consistent with observed fluctuations and suggest that the recent warming slowdown can be explained as a once-in-one-hundred-years event caused by internal climate variability; periods of strong cooling in the model (`hiatus' analogs) are mainly associated with ENSO-related variability and to a lesser degree also to PDO shifts, with the AMO playing a minor role. Common atmospheric and oceanic variability patterns are simulated largely consistent with their real counterparts. Typical deficits also found in other models at similar resolutions remain, in particular too weak non-seasonal variability of SSTs over large parts of the ocean and episodic periods of almost absent

  7. Basic Services for Children: A Continuing Search for Learning Priorities. A Dossier for Initiating a Dialogue--Part II, 1978. Experiments and Innovations in Education No. 37.

    ERIC Educational Resources Information Center

    United Nations Educational, Scientific, and Cultural Organization, Paris (France).

    Both parts I and II of the dossier are collections of selected activities directed toward the deprived young in a developing world. This book, part II, departs from its predecessor in that it takes a more global view of education services to both children and adults in developing countries. Part A discusses the philosophy and scope of the dossier.…

  8. Training psychotherapists in attributes of "mind" from Zen and psychoanalytic perspectives, Part II: Attention, here and now, nonattachment, and compassion.

    PubMed

    Twemlow, S W

    2001-01-01

    Part II of this paper enumerates four additional attributes of mind derived from Zen that could enrich the training of a psychotherapist. These include: training and modulation of the therapist's attention, the centrality of the concept of "here and now," what it is and is not, and the natural unpressured emergence of compassion as a manifestation of the therapist's nature.

  9. Serial displacement chromatofocusing and its applications in multidimensional chromatography and gel electrophoresis: II. Experimental results.

    PubMed

    Shen, Hong; Li, Xiang; Bieberich, Charles; Frey, Douglas D

    2009-02-06

    Part I of this study investigated the theory and basic characteristics of "serial displacement chromatofocusing" (SDC). In Part II of this study, SDC is applied to two prototype applications which have potential uses in proteomics and related areas involving the analysis of complex analyte mixtures. In the first application, SDC was used as a prefractionation method prior to two-dimensional polyacrylamide gel electrophoresis (2D-PAGE) to separate a human prostate cancer cell lysate. It was observed that the resolution achieved in narrow-pI-range 2D-PAGE was improved when using SDC prefractionation, so that SDC may be useful as a low-cost, high-speed, and highly scalable alternative to electrophoretic prefractionation methods for 2D-PAGE. The second application involves the use of SDC as the first dimension, and reversed-phase chromatography as the second dimension, to produce a novel, fully automated, two-dimensional high-performance liquid chromatography technique. The method was shown to have performance advantages over one-dimensional reversed-phase chromatography for peptide separations.

  10. Final Report for Dynamic Models for Causal Analysis of Panel Data. Models for Change in Quantitative Variables, Part II Scholastic Models. Part II, Chapter 4.

    ERIC Educational Resources Information Center

    Hannan, Michael T.

    This document is part of a series of chapters described in SO 011 759. Stochastic models for the sociological analysis of change and the change process in quantitative variables are presented. The author lays groundwork for the statistical treatment of simple stochastic differential equations (SDEs) and discusses some of the continuities of…

  11. An assessment of the Arctic Ocean in a suite of interannual CORE-II simulations. Part II: Liquid freshwater

    NASA Astrophysics Data System (ADS)

    Wang, Qiang; Ilicak, Mehmet; Gerdes, Rüdiger; Drange, Helge; Aksenov, Yevgeny; Bailey, David A.; Bentsen, Mats; Biastoch, Arne; Bozec, Alexandra; Böning, Claus; Cassou, Christophe; Chassignet, Eric; Coward, Andrew C.; Curry, Beth; Danabasoglu, Gokhan; Danilov, Sergey; Fernandez, Elodie; Fogli, Pier Giuseppe; Fujii, Yosuke; Griffies, Stephen M.; Iovino, Doroteaciro; Jahn, Alexandra; Jung, Thomas; Large, William G.; Lee, Craig; Lique, Camille; Lu, Jianhua; Masina, Simona; Nurser, A. J. George; Rabe, Benjamin; Roth, Christina; Salas y Mélia, David; Samuels, Bonita L.; Spence, Paul; Tsujino, Hiroyuki; Valcke, Sophie; Voldoire, Aurore; Wang, Xuezhu; Yeager, Steve G.

    2016-03-01

    The Arctic Ocean simulated in 14 global ocean-sea ice models in the framework of the Coordinated Ocean-ice Reference Experiments, phase II (CORE-II) is analyzed in this study. The focus is on the Arctic liquid freshwater (FW) sources and freshwater content (FWC). The models agree on the interannual variability of liquid FW transport at the gateways where the ocean volume transport determines the FW transport variability. The variation of liquid FWC is induced by both the surface FW flux (associated with sea ice production) and lateral liquid FW transport, which are in phase when averaged on decadal time scales. The liquid FWC shows an increase starting from the mid-1990s, caused by the reduction of both sea ice formation and liquid FW export, with the former being more significant in most of the models. The mean state of the FW budget is less consistently simulated than the temporal variability. The model ensemble means of liquid FW transport through the Arctic gateways compare well with observations. On average, the models have too high mean FWC, weaker upward trends of FWC in the recent decade than the observation, and low consistency in the temporal variation of FWC spatial distribution, which needs to be further explored for the purpose of model development.

  12. North Atlantic simulations in Coordinated Ocean-ice Reference Experiments phase II (CORE-II). Part I: Mean states

    NASA Astrophysics Data System (ADS)

    Danabasoglu, Gokhan; Yeager, Steve G.; Bailey, David; Behrens, Erik; Bentsen, Mats; Bi, Daohua; Biastoch, Arne; Böning, Claus; Bozec, Alexandra; Canuto, Vittorio M.; Cassou, Christophe; Chassignet, Eric; Coward, Andrew C.; Danilov, Sergey; Diansky, Nikolay; Drange, Helge; Farneti, Riccardo; Fernandez, Elodie; Fogli, Pier Giuseppe; Forget, Gael; Fujii, Yosuke; Griffies, Stephen M.; Gusev, Anatoly; Heimbach, Patrick; Howard, Armando; Jung, Thomas; Kelley, Maxwell; Large, William G.; Leboissetier, Anthony; Lu, Jianhua; Madec, Gurvan; Marsland, Simon J.; Masina, Simona; Navarra, Antonio; George Nurser, A. J.; Pirani, Anna; y Mélia, David Salas; Samuels, Bonita L.; Scheinert, Markus; Sidorenko, Dmitry; Treguier, Anne-Marie; Tsujino, Hiroyuki; Uotila, Petteri; Valcke, Sophie; Voldoire, Aurore; Wang, Qiang

    2014-01-01

    Simulation characteristics from eighteen global ocean-sea-ice coupled models are presented with a focus on the mean Atlantic meridional overturning circulation (AMOC) and other related fields in the North Atlantic. These experiments use inter-annually varying atmospheric forcing data sets for the 60-year period from 1948 to 2007 and are performed as contributions to the second phase of the Coordinated Ocean-ice Reference Experiments (CORE-II). The protocol for conducting such CORE-II experiments is summarized. Despite using the same atmospheric forcing, the solutions show significant differences. As most models also differ from available observations, biases in the Labrador Sea region in upper-ocean potential temperature and salinity distributions, mixed layer depths, and sea-ice cover are identified as contributors to differences in AMOC. These differences in the solutions do not suggest an obvious grouping of the models based on their ocean model lineage, their vertical coordinate representations, or surface salinity restoring strengths. Thus, the solution differences among the models are attributed primarily to use of different subgrid scale parameterizations and parameter choices as well as to differences in vertical and horizontal grid resolutions in the ocean models. Use of a wide variety of sea-ice models with diverse snow and sea-ice albedo treatments also contributes to these differences. Based on the diagnostics considered, the majority of the models appear suitable for use in studies involving the North Atlantic, but some models require dedicated development effort.

  13. REACTION WHEEL ATTITUDE CONTROL FOR SPACE VEHICLES. PART II. EXPERIMENTAL. SECTION 1,

    DTIC Science & Technology

    A laboratory model simulating, insofar as practical, a single axis of a space vehicle with a reaction wheel control system was constructed from off...activiated, generating sufficient impulse to reduce the wheel speed to zero. The system then returns to the reaction wheel mode of control. Several

  14. Stress-Dilatancy for Soils. Part II: Experimental Validation for Triaxial Tests

    NASA Astrophysics Data System (ADS)

    Szypcio, Zenon

    2016-12-01

    Different forms of the stress-dilatancy relations obtained based on the frictional theory for the triaxial condition are presented. The analysed test data show that the shear resistance of many soils is purely frictional. The angle Φ0 represents the resistance of the soil as a combined effect of sliding and particle rolling on the macro-scale during shear at the critical frictional state. The stress-plastic dilatancy relations differ not only for triaxial compression and extension but also for drained and undrained conditions. The experiment investigated shows the correctness of the frictional state theory in the triaxial condition.

  15. Chapter 5: Methods and protocols in peripheral nerve regeneration experimental research: part II-morphological techniques.

    PubMed

    Raimondo, Stefania; Fornaro, Michele; Di Scipio, Federica; Ronchi, Giulia; Giacobini-Robecchi, Maria G; Geuna, Stefano

    2009-01-01

    This paper critically overviews the main procedures used for carrying out morphological analysis of peripheral nerve fibers in light, confocal, and electron microscopy. In particular, this paper emphasizes the importance of osmium tetroxide post-fixation as a useful procedure to be adopted independently from the embedding medium. In order to facilitate the use of any described techniques, all protocols are presented in full details. The pros and cons for each method are critically addressed and practical indications on the different imaging approaches are reported. Moreover, the basic rules of morpho-quantitative stereological analysis of nerve fibers are described addressing the important concepts of design-based sampling and the disector. Finally, a comparison of stereological analysis on myelinated nerve fibers between paraffin- and resin-embedded rat radial nerves is reported showing that different embedding procedures might influence the distribution of size parameters.

  16. Evaluation and Visualization of Surface Defects - a Numerical and Experimental Study on Sheet-Metal Parts

    SciTech Connect

    Andersson, A.

    2005-08-05

    The ability to predict surface defects in outer panels is of vital importance in the automotive industry, especially for brands in the premium car segment. Today, measures to prevent these defects can not be taken until a test part has been manufactured, which requires a great deal of time and expense. The decision as to whether a certain surface is of acceptable quality or not is based on subjective evaluation. It is quite possible to detect a defect by measurement, but it is not possible to correlate measured defects and the subjective evaluation. If all results could be based on the same criteria, it would be possible to compare a surface by both FE simulations, experiments and subjective evaluation with the same result.In order to find a solution concerning the prediction of surface defects, a laboratory tool was manufactured and analysed both experimentally and numerically. The tool represents the area around a fuel filler lid and the aim was to recreate surface defects, so-called 'teddy bear ears'. A major problem with the evaluation of such defects is that the panels are evaluated manually and to a great extent subjectivity is involved in the classification and judgement of the defects. In this study the same computer software was used for the evaluation of both the experimental and the numerical results. In this software the surface defects were indicated by a change in the curvature of the panel. The results showed good agreement between numerical and experimental results. Furthermore, the evaluation software gave a good indication of the appearance of the surface defects compared to an analysis done in existing tools for surface quality measurements. Since the agreement between numerical and experimental results was good, this indicates that these tools can be used for an early verification of surface defects in outer panels.

  17. Comprehensive Employment and Training Act. Review and Oversight. Part I: Background and First Year Results. Part II: Public Policy Issues.

    ERIC Educational Resources Information Center

    Employment and Training Administration (DOL), Washington, DC.

    This report reviews the establishment and early performance of the comprehensive manpower system established by the Comprehensive Employment and Training Act (CETA). The report is divided into two major sections. Part 1 examines the background and first year results of the CETA program. The legislative and programmatic antecedents to CETA are…

  18. The Design of Research Laboratories. Part I: A General Assessment. Part II: Air Conditioning and Conditioned Rooms.

    ERIC Educational Resources Information Center

    Legget, R. F.; Hutcheon, N. B.

    Design factors in the planning of research laboratories are described which include--(1) location, (2) future expansion, (3) internal flexibility, (4) provision of services, (5) laboratory furnishing, (6) internal traffic, (7) space requirements, and (8) building costs. A second part discusses air-conditioning and conditioned rooms--(1)…

  19. School Reform through Instructional Support: The Pennsylvania Initiative. Part I: The Instructional Support Team (IST) [and] Part II: Instructional Evaluation.

    ERIC Educational Resources Information Center

    Kovaleski, Joseph F.; Tucker, James A.; Duffy, Daniel J., Jr.; Lowery, Paul E.; Gickling, Edward E.

    1995-01-01

    The document features two articles on school reform in Pennsylvania. Part one discusses the Instruction Support Team (IST) (Kovaleski, Tucker, and Duffy). The IST process is an intensive building-based pre-referral intervention program to assist elementary students experiencing difficulty in the classroom. The IST is a working group of teachers…

  20. Industry Wage Surveys: Banking and Life Insurance, December 1976. Part I--Banking. Part II--Life Insurance. Bulletin 1988.

    ERIC Educational Resources Information Center

    Barsky, Carl

    This report presents the results of a survey conducted by the Bureau of Labor Statistics to determine wages and related benefits in (1) the banking industry and (2) for employees in home offices and regional head offices of life insurance carriers. Part 1 discusses banking industry characteristics and presents data for tellers and selected…

  1. The Akron Story Part I: Summer Foreign Language Camps and The Akron Story Part II: Europe on $15 a Day.

    ERIC Educational Resources Information Center

    Durden, John D.; And Others

    1984-01-01

    Two articles combined here describe aspects of the Akron, Ohio Public Schools' summer foreign language immersion camps for both students and teachers. The first article, "The Akron Story Part I: Summer Foreign Language Camps" (John D. Durden and Sandra K. Strauber), outlines the structure of the camps, in which students live in simulated…

  2. Sixth IASLIC Seminar Papers. Part I: Reference Service-in-Action. Part II: Processing & Servicing of Special Materials in Libraries.

    ERIC Educational Resources Information Center

    Indian Association of Special Libraries & Information Centres, Calcutta (India).

    Part I contains 22 papers covering all aspects of the library reference services including sources of reference materials, an evaluation of reference sources, building a reference collection, training a reference librarian, and the needs of the industrial and medical communities for reference services. All the papers are slanted toward the special…

  3. Harmonization of strategies for the validation of quantitative analytical procedures. A SFSTP proposal--part II.

    PubMed

    Hubert, Ph; Nguyen-Huu, J-J; Boulanger, B; Chapuzet, E; Chiap, P; Cohen, N; Compagnon, P-A; Dewé, W; Feinberg, M; Lallier, M; Laurentie, M; Mercier, N; Muzard, G; Nivet, C; Valat, L; Rozet, E

    2007-09-21

    As reported in a previous paper, the main objective of the new commission of the Société Française des Sciences et Techniques Pharmaceutiques (SFSTP) was the harmonisation of approaches for the validation of quantitative analytical procedures. In a series of meetings, members of this Commission have first tried to review the objectives of analytical methods and the objectives of validation methods and to recommend the use of two-sided beta-expectation tolerance intervals for total error of validation samples (accuracy profile) in the acceptance/rejection of analytical method in validation phase. In the context of the harmonization, the other objectives were: (i) to propose a consensus on the norms usually recognized, while widely incorporating the ISO terminology; (ii) to recommend to validate the analytical procedure accordingly to the way it will be used in routine; (iii) to elaborate a rational, practical and statistically reliable strategy to assure the quality of the analytical results generated. This strategy has been formalised in a guide and the three latter objectives made by the Commission are summarised in the present paper which is the second part of summary report of the SFSTP commission. The SFSTP guide has been produced to help analysts to validate their analytical methods. It is the result of a consensus between professionals having expertise in analytical and/or statistical fields. The suggestions presented in this paper should therefore help the analyst to design and perform the minimum number validation experiments needed to obtain all the required information to establish and demonstrate the reliability of its analytical procedure.

  4. [Verrucous pastern dermatitis syndrome in heavy draught horses. Part II: Clinical findings].

    PubMed

    Geburek, F; Deegen, E; Hewicker-Trautwein, M; Ohnesorge, B

    2005-07-01

    In the present field study the skin of the feet of 37 heavy draught horses of different breeds showing verrucous pastern dermatitis was examined clinically. Included were the degree of severity of the disease and the prevalence of anatomically normal structures associated with the skin: fetlock tufts of hair ("feathering"), ergots, chestnuts, bulges in the pastern region, cannon circumference. Each horse was examined for Chorioptes sp. skin mites. Information was also collected on the development of the skin alterations and housing conditions and feeding. These individual data were correlated with the clinical degree of severity of verrucous pastern dermatitis, which was evaluated using a numerical code (scoring system). In addition, punch biopsies were taken from the diseased skin of the feet and from healthy skin of the neck for comparative patho-histological examination (see Part III). Verrucous pastern dermatitis is a chronic disease which can be divided into four groups: scaling (group I), hyperkeratotic and hyperplastic plaque-like lesions (group II), tuberous skin masses (group III), and verrucous skin lesions with rugged surfaces (group IV). No correlation was found between the clinical degree of severity of the skin lesions and sex, breed, amount of work, use of stallions for breeding, grooming condition of the hair, white markings in the foot region, or Chorioptes sp. infestation. In regard to feeding it was found that the amount of maize and oats fed had some influence on the clinical degree of severity. Statistical analysis revealed a significant correlation between the clinical degree of severity and the age, the grooming condition of the hooves, and the mean cannon circumference. The prevalence of fetlock tufts of hair, chestnuts, ergots, and anatomically normal bulges in the pastern region also increased significantly with the clinical degree of severity. Furthermore the study revealed that the clinical degree of severity depended on the hygienic

  5. The new production theory for health care through clinical reengineering: a study of clinical guidelines--Part II.

    PubMed

    Sharp, J R

    1995-01-01

    In Part I of this two-part article, in the December 1994 issue of the journal, the author discussed the manufacturing theories of Peter Drucker in terms of their applicability for the health care field. He concluded that Drucker's four principles and practices of manufacturing--statistical quality control, manufacturing accounting, modular organization, and systems approach--do have application to the health care system. Clinical guidelines, a variation on the Drucker theory, are a specific example of the manufacturing process in health. The performance to date of some guidelines and their implications for the health care reform debate are discussed in Part II of the article.

  6. The 183-WSL Fast Rain Rate Retrieval Algorithm. Part II: Validation Using Ground Radar Measurements

    NASA Technical Reports Server (NTRS)

    Laviola, Sante; Levizzani, Vincenzo

    2014-01-01

    The Water vapour Strong Lines at 183 GHz (183-WSL) algorithm is a method for the retrieval of rain rates and precipitation type classification (convectivestratiform), that makes use of the water vapor absorption lines centered at 183.31 GHz of the Advanced Microwave Sounding Unit module B (AMSU-B) and of the Microwave Humidity Sounder (MHS) flying on NOAA-15-18 and NOAA-19Metop-A satellite series, respectively. The characteristics of this algorithm were described in Part I of this paper together with comparisons against analogous precipitation products. The focus of Part II is the analysis of the performance of the 183-WSL technique based on surface radar measurements. The ground truth dataset consists of 2.5 years of rainfall intensity fields from the NIMROD European radar network which covers North-Western Europe. The investigation of the 183-WSL retrieval performance is based on a twofold approach: 1) the dichotomous statistic is used to evaluate the capabilities of the method to identify rain and no-rain clouds; 2) the accuracy statistic is applied to quantify the errors in the estimation of rain rates.The results reveal that the 183-WSL technique shows good skills in the detection of rainno-rain areas and in the quantification of rain rate intensities. The categorical analysis shows annual values of the POD, FAR and HK indices varying in the range 0.80-0.82, 0.330.36 and 0.39-0.46, respectively. The RMSE value is 2.8 millimeters per hour for the whole period despite an overestimation in the retrieved rain rates. Of note is the distribution of the 183-WSL monthly mean rain rate with respect to radar: the seasonal fluctuations of the average rainfalls measured by radar are reproduced by the 183-WSL. However, the retrieval method appears to suffer for the winter seasonal conditions especially when the soil is partially frozen and the surface emissivity drastically changes. This fact is verified observing the discrepancy distribution diagrams where2the 183-WSL

  7. EXPERIMENTAL EVALUATION OF CHEMICAL SEQUESTRATION OF CARBON DIOXIDE IN DEEP AQUIFER MEDIA - PHASE II

    SciTech Connect

    Neeraj Gupta; Bruce Sass; Jennifer Ickes

    2000-11-28

    In 1998 Battelle was selected by the U.S. Department of Energy's (DOE) National Energy Technology Laboratory (NETL) under a Novel Concepts project grant to continue Phase II research on the feasibility of carbon dioxide (CO{sub 2}) sequestration in deep saline formations. The focus of this investigation is to conduct detailed laboratory experiments to examine factors that may affect chemical sequestration of CO{sub 2} in deep saline formations. Reactions between sandstone and other geologic media from potential host reservoirs, brine solutions, and CO{sub 2} are being investigated under high-pressure conditions. Some experiments also include sulfur dioxide (SO{sub 2}) gases to evaluate the potential for co-injection of CO{sub 2} and SO{sub 2} related gases in the deep formations. In addition, an assessment of engineering and economic aspects is being conducted. This current Technical Progress Report describes the status of the project as of September 2000. The major activities undertaken during the quarter included several experiments conducted to investigate the effects of pressure, temperature, time, and brine composition on rock samples from potential host reservoirs. Samples (both powder and slab) were taken from the Mt. Simon Sandstone, a potential CO{sub 2} host formation in the Ohio, the Eau Claire Shale, and Rome Dolomite samples that form the caprock for Mt. Simon Sandstone. Also, a sample with high calcium plagioclase content from Frio Formation in Texas was used. In addition, mineral samples for relatively pure Anorthite and glauconite were experimented on with and without the presence of additional clay minerals such as kaolinite and montmorillonite. The experiments were run for one to two months at pressures similar to deep reservoirs and temperatures set at 50 C or 150 C. Several enhancements were made to the experimental equipment to allow for mixing of reactants and to improve sample collection methods. The resulting fluids (gases and liquids) as

  8. A novel urotensin II receptor antagonist, KR-36996, improved cardiac function and attenuated cardiac hypertrophy in experimental heart failure.

    PubMed

    Oh, Kwang-Seok; Lee, Jeong Hyun; Yi, Kyu Yang; Lim, Chae Jo; Park, Byung Kil; Seo, Ho Won; Lee, Byung Ho

    2017-03-15

    Urotensin II and its receptor are thought to be involved in various cardiovascular diseases such as heart failure, pulmonary hypertension and atherosclerosis. Since the regulation of the urotensin II/urotensin II receptor offers a great potential for therapeutic strategies related to the treatment of cardiovascular diseases, the study of selective and potent antagonists for urotensin II receptor is more fascinating. This study was designed to determine the potential therapeutic effects of a newly developed novel urotensin II receptor antagonist, N-(1-(3-bromo-4-(piperidin-4-yloxy)benzyl)piperidin-4-yl)benzo[b]thiophene-3-carboxamide (KR-36996), in experimental models of heart failure. KR-36996 displayed a high binding affinity (Ki=4.44±0.67nM) and selectivity for urotensin II receptor. In cell-based study, KR-36996 significantly inhibited urotensin II-induced stress fiber formation and cellular hypertrophy in H9c2UT cells. In transverse aortic constriction-induced cardiac hypertrophy model in mice, the daily oral administration of KR-36996 (30mg/kg) for 14 days significantly decreased left ventricular weight by 40% (P<0.05). In myocardial infarction-induced chronic heart failure model in rats, repeated echocardiography and hemodynamic measurements demonstrated remarkable improvement of the cardiac performance by KR-36996 treatment (25 and 50mg/kg/day, p.o.) for 12 weeks. Moreover, KR-36996 decreased interstitial fibrosis and cardiomyocyte hypertrophy in the infarct border zone. These results suggest that potent and selective urotensin II receptor antagonist could efficiently attenuate both cardiac hypertrophy and dysfunction in experimental heart failure. KR-36996 may be useful as an effective urotensin II receptor antagonist for pharmaceutical or clinical applications.

  9. The Interstellar Abundance of Lead: Experimental Oscillator Strengths for Pb II λ1203 and λ1433 and New Detections of Pb II in the Interstellar Medium

    NASA Astrophysics Data System (ADS)

    Ritchey, Adam Michael; Heidarian, Negar; Irving, Richard E.; Federman, Steven R.; Ellis, David G.; Cheng, Song; Curtis, Larry J.; Furman, W. A.

    2015-08-01

    Accurate gas-phase abundances of ions in the interstellar medium may be obtained through the analysis of interstellar absorption lines, but only if the oscillator strengths (f-values) of the relevant transitions are well known. For dominant ions, comparison of the gas-phase abundance with the appropriate solar reference abundance yields the degree to which the element is incorporated into interstellar dust grains. Singly-ionized lead is the dominant form of this element in the neutral interstellar medium. However, while Pb II has several strong resonance lines in the ultraviolet, the f-values for these transitions are uncertain. Here, we present the first experimentally determined oscillator strengths for the Pb II transitions at 1203.6 Å and 1433.9 Å, obtained from lifetime measurements made using beam-foil techniques. We also present new detections of these lines in the interstellar medium from an analysis of archival spectra acquired by the Space Telescope Imaging Spectrograph onboard the Hubble Space Telescope. Notably, our observations of the Pb II λ1203 line represent the first detection of this transition in interstellar gas. Our experimental f-values for the Pb II λ1203 and λ1433 transitions are consistent with recent theoretical results, including our own relativistic calculations, but are significantly smaller than previous values based on older calculations. For the Pb II λ1433 line, in particular, our new f-value yields an increase in the interstellar abundance of Pb of 0.43 dex over estimates based on the f-value listed by Morton. With our revised f-values, and with our new detections of Pb II λ1203 and λ1433, we find that the depletion of Pb onto interstellar grains is not nearly as severe as previously thought, and is very similar to the depletions seen for elements such as Zn and Sn, which have similar condensation temperatures.

  10. Laser weldability of 21Cr-6Ni-9Mn stainless steel: Part II - Weldability diagrams

    SciTech Connect

    Tate, Stephen B.; Javernick, Daniel Anthony; Lienert, Thomas J.; Liu, Stephen

    2016-11-02

    In this second part of the study, weldability diagrams developed to relate solidification crack susceptibility and chemical composition for laser welded type 21Cr-6Ni-9Mn (21-6-9) stainless steel are presented. Sigmajig testing on 14 commercial 21-6-9 alloys, 20 experimental 21-6-9 alloys, and 7 other high-N, high-Mn austenitic stainless steels was used to develop weldability diagrams for solidification crack susceptibility for laser welding of type 21-6-9. Three travel speeds were used to show the changes in minimum Creq/Nieq for primary ferrite solidification as solidification rate increase d with travel speed . Primary austenite solidification was observed below 1.55 Creq/Nieq (Espy equivalents) at 21 mm/s travel speed. At 42 mm/s travel speed , a mix of solidification modes were displayed for alloys from 1.55-1.75 Creq/Nieq. Primary ferrite solidification was observed above 1.75 Creq/Nieq at both 42 and 85 mm/s travel speeds. No solidification cracking was observed for alloys with primary ferrite solidification. Lastly, variable cracking behavior was found in alloys with primary austenite solidification, but in general cracking was observed in alloys with greater than 0.02 wt-% combined impurity content according to (P+0.2S).

  11. Laser weldability of 21Cr-6Ni-9Mn stainless steel: Part II - Weldability diagrams

    DOE PAGES

    Tate, Stephen B.; Javernick, Daniel Anthony; Lienert, Thomas J.; ...

    2016-11-02

    In this second part of the study, weldability diagrams developed to relate solidification crack susceptibility and chemical composition for laser welded type 21Cr-6Ni-9Mn (21-6-9) stainless steel are presented. Sigmajig testing on 14 commercial 21-6-9 alloys, 20 experimental 21-6-9 alloys, and 7 other high-N, high-Mn austenitic stainless steels was used to develop weldability diagrams for solidification crack susceptibility for laser welding of type 21-6-9. Three travel speeds were used to show the changes in minimum Creq/Nieq for primary ferrite solidification as solidification rate increase d with travel speed . Primary austenite solidification was observed below 1.55 Creq/Nieq (Espy equivalents) at 21more » mm/s travel speed. At 42 mm/s travel speed , a mix of solidification modes were displayed for alloys from 1.55-1.75 Creq/Nieq. Primary ferrite solidification was observed above 1.75 Creq/Nieq at both 42 and 85 mm/s travel speeds. No solidification cracking was observed for alloys with primary ferrite solidification. Lastly, variable cracking behavior was found in alloys with primary austenite solidification, but in general cracking was observed in alloys with greater than 0.02 wt-% combined impurity content according to (P+0.2S).« less

  12. Rate of reduction of ore-carbon composites: Part II. Modeling of reduction in extended composites

    SciTech Connect

    Fortini, O.M.; Fruehan, R.J.

    2005-12-01

    A new process for ironmaking was proposed using a rotary hearth furnace and an iron bath smelter to produce iron employing wood charcoal as an energy source and reductant. This paper examines reactions in composite pellet samples with sizes close to sizes used in industrial practice (10 to 16 min in diameter). A model was constructed using the combined kinetic mechanism developed in Part I of this series of articles along with equations for the computation of pellet temperature and shrinkage during the reaction. The analysis of reaction rates measured for pellets with wood charcoal showed that heat transfer plays a significant role in their overall rate of reaction at elevated temperatures. The slower rates measured in pellets containing coal char show that the intrinsic kinetics of carbon oxidation is more significant than heat transfer. Model calculations suggest that the rates are highly sensitive to the thermal conductivity of pellets containing wood charcoal and are less sensitive to the external conditions of heat transfer. It was seen that the changes in pellet surface area and diameter due to shrinkage introduce little change on reaction rates. The model developed provides an adequate description of pellets of wood charcoal up to circa 90% of reduction. Experimentally determined rates of reduction of iron oxide by wood charcoal were approximately 5 to 10 times faster than rates measured in pellets with coal char.

  13. An Ansatz Regarding Relativistic Space Travel Part II-Propulsion Realities

    SciTech Connect

    Murad, Paul A

    2008-01-21

    Travel to the stars can involve a perilous journey in an unfriendly space-time continuum that can include singularities, nonlinear events, gravity as a function of both position and vehicle velocity, and extra dimensional effects discussed in Part I. Such a device may possibly use field propulsion technology. Although several field propulsion schemes exist, a proposed candidate is based upon using an electromagnetic drive that uses a rotating magnetic field superimposed on the spacecraft's stationary or static electric field. This is comparable to a Searl generator and the field interaction would generate an electromagnetic vortex to create nonlinear gravitational effects possibly due to an inverse Gertsenshtein relationship to push against the intrinsic gravitational field of a planet. Moreover, changing alignment of the magnetic field axis with the electric field will induce a margin of lateral controllability. Issues such as assessing this combined effect of using both electric and magnetic fields are discussed. Finally, the need for experimental data is stressed to validate these otherwise very speculative theoretical notions.

  14. An Ansatz Regarding Relativistic Space Travel Part II-Propulsion Realities

    NASA Astrophysics Data System (ADS)

    Murad, Paul A.

    2008-01-01

    Travel to the stars can involve a perilous journey in an unfriendly space-time continuum that can include singularities, nonlinear events, gravity as a function of both position and vehicle velocity, and extra dimensional effects discussed in Part I. Such a device may possibly use field propulsion technology. Although several field propulsion schemes exist, a proposed candidate is based upon using an electromagnetic drive that uses a rotating magnetic field superimposed on the spacecraft's stationary or static electric field. This is comparable to a Searl generator and the field interaction would generate an electromagnetic vortex to create nonlinear gravitational effects possibly due to an inverse Gertsenshtein relationship to push against the intrinsic gravitational field of a planet. Moreover, changing alignment of the magnetic field axis with the electric field will induce a margin of lateral controllability. Issues such as assessing this combined effect of using both electric and magnetic fields are discussed. Finally, the need for experimental data is stressed to validate these otherwise very speculative theoretical notions.

  15. Contributions to North American Ethnology, Volume II, Part II: The Klamath Indians of southwestern Oregon: dictionary of the Klamath language

    USGS Publications Warehouse

    Gatschet, Albert Samuel; Powell, John Wesley

    1890-01-01

    The present Dictionary, divided in two parts, contains the lexical portion of an Oregonian language never before reduced to writing. In view of the numerous obstacles and difficulties encountered in the preparation of such a work, a few hints upon its origin and tendencies will be of service in directing the studies of those who wish to acquire a more intimate knowledge of this energetic and well developed western language.

  16. Inlet Flow Test Calibration for a Small Axial Compressor Facility. Part 1: Design and Experimental Results

    NASA Technical Reports Server (NTRS)

    Miller, D. P.; Prahst, P. S.

    1994-01-01

    An axial compressor test rig has been designed for the operation of small turbomachines. The inlet region consisted of a long flowpath region with two series of support struts and a flapped inlet guide vane. A flow test was run to calibrate and determine the source and magnitudes of the loss mechanisms in the inlet for a highly loaded two-stage axial compressor test. Several flow conditions and IGV angle settings were established in which detailed surveys were completed. Boundary layer bleed was also provided along the casing of the inlet behind the support struts and ahead of the IGV. A detailed discussion of the flowpath design along with a summary of the experimental results are provided in Part 1.

  17. The structure of small, vapor-deposited particles. II - Experimental study of particles with hexagonal profile

    NASA Technical Reports Server (NTRS)

    Yacaman, M. J.; Heinemann, K.; Yang, C. Y.; Poppa, H.

    1979-01-01

    'Multiply-twinned' gold particles with hexagonal bright field TEM profile were determined to be icosahedra composed of 20 identical and twin-related tetrahedral building units that do not have an fcc structure. The crystal structure of these slightly deformed tetrahedra is rhombohedral. Experimental evidence supporting this particle model was obtained by selected-zone dark field and weak beam dark field electron microscopy. In conjunction with the results of part I, it has been concluded that multiply-twinned gold particles of pentagonal or hexagonal profile that are found during the early stages of the vapor deposition growth process on alkali halide surfaces do not have an fcc crystal structure, which is in obvious contrast to the structure of bulk gold.

  18. Changes and significance of IL-25 in chicken collagen II-induced experimental arthritis (CIA).

    PubMed

    Kaiwen, Wang; Zhaoliang, Su; Yinxia, Zhao; Siamak, Sandoghchian Shotorbani; Zhijun, Jiao; Yuan, Xue; Heng, Yang; Dong, Zheng; Yanfang, Liu; Pei, Shen; Shengjun, Wang; Qixiang, Shao; Xinxiang, Huang; Liwei, Lu; Huaxi, Xu

    2012-08-01

    Rheumatoid arthritis (RA) is an autoimmune inflammatory disease. It is a systemic inflammatory disease, characterized by chronic, symmetrical, multi-articular synovial arthritis. IL-25 (IL-17E) is a member of the recently emerged cytokine family (IL-17s), which is expressed in Th2 cells and bone marrow-derived mast cells. Unlike the other members of this family, IL-25 is capable of inducing Th2-associated cytokines (IL-4, IL-5, and IL-13) and also promotes the release of some pro-immune factors (IL-6 and IL-8). IL-25 is also a pleiotropic factor, which constitutes a tissue-specific pathological injury and chronic inflammation. In this study, we used chicken collagen II-induced experimental arthritis (CIA) model in DBA/1 mice to investigate the relationship between IL-25 and other inflammatory factors, revealing the possible mechanism in CIA. Our results showed that the expression level of IL-25 was enhanced in the late stage of CIA, and IL-17 was increased in the early stage of the disease. It is well known that IL-17 has a crucial role in the development of RA pathogenesis, and IL-25 plays a significant role in humoral immune. For reasons given above, we suggested that the IL-25 inhibited IL-17 expression to some extent, while enhancing the production of IL-4. It was confirmed that IL-25 not only regulated the cellular immune, but also involved the humoral immune in rheumatoid arthritis.

  19. Analysis of Experimental Data for High Burnup PWR Spent Fuel Isotopic Validation - Vandellos II Reactor

    SciTech Connect

    Ilas, Germina; Gauld, Ian C

    2011-01-01

    This report is one of the several recent NUREG/CR reports documenting benchmark-quality radiochemical assay data and the use of the data to validate computer code predictions of isotopic composition for spent nuclear fuel, to establish the uncertainty and bias associated with code predictions. The experimental data analyzed in the current report were acquired from a high-burnup fuel program coordinated by Spanish organizations. The measurements included extensive actinide and fission product data of importance to spent fuel safety applications, including burnup credit, decay heat, and radiation source terms. Six unique spent fuel samples from three uranium oxide fuel rods were analyzed. The fuel rods had a 4.5 wt % {sup 235}U initial enrichment and were irradiated in the Vandellos II pressurized water reactor operated in Spain. The burnups of the fuel samples range from 42 to 78 GWd/MTU. The measurements were used to validate the two-dimensional depletion sequence TRITON in the SCALE computer code system.

  20. Vibration Based Crack Detection in a Rotating Disk. Part 2; Experimental Results

    NASA Technical Reports Server (NTRS)

    Gyekenyesi, Andrew L.; Sawicki, Jerzy T.; Martin, Richard E.; Haase, Wayne C.; Baaklini, George

    2005-01-01

    This paper describes the experimental results concerning the detection of a crack in a rotating disk. The goal was to utilize blade tip clearance and shaft vibration measurements to monitor changes in the system's center of mass and/or blade deformation behaviors. The concept of the approach is based on the fact that the development of a disk crack results in a distorted strain field within the component. As a result, a minute deformation in the disk's geometry as well as a change in the system's center of mass occurs. Here, a notch was used to simulate an actual crack. The vibration based experimental results failed to identify the existence of a notch when utilizing the approach described above, even with a rather large, circumferential notch (l.2 in.) located approximately mid-span on the disk (disk radius = 4.63 in. with notch at r = 2.12 in.). This was somewhat expected, since the finite element based results in Part 1 of this study predicted changes in blade tip clearance as well as center of mass shifts due to a notch to be less than 0.001 in. Therefore, the small changes incurred by the notch could not be differentiated from the mechanical and electrical noise of the rotor system. Although the crack detection technique of interest failed to identify the existence ofthe notch, the vibration data produced and captured here will be utilized in upcoming studies that will focus on different data mining techniques concerning damage detection in a disk.

  1. Integration of Error Compensation of Coordinate Measuring Machines into Feature Measurement: Part II—Experimental Implementation

    PubMed Central

    Calvo, Roque; D’Amato, Roberto; Gómez, Emilio; Domingo, Rosario

    2016-01-01

    Coordinate measuring machines (CMM) are main instruments of measurement in laboratories and in industrial quality control. A compensation error model has been formulated (Part I). It integrates error and uncertainty in the feature measurement model. Experimental implementation for the verification of this model is carried out based on the direct testing on a moving bridge CMM. The regression results by axis are quantified and compared to CMM indication with respect to the assigned values of the measurand. Next, testing of selected measurements of length, flatness, dihedral angle, and roundness features are accomplished. The measurement of calibrated gauge blocks for length or angle, flatness verification of the CMM granite table and roundness of a precision glass hemisphere are presented under a setup of repeatability conditions. The results are analysed and compared with alternative methods of estimation. The overall performance of the model is endorsed through experimental verification, as well as the practical use and the model capability to contribute in the improvement of current standard CMM measuring capabilities. PMID:27754441

  2. Method of extraction of the Mueller-Jones part out of an experimental Mueller matrix

    NASA Astrophysics Data System (ADS)

    Savenkov, Sergey N.; Marienko, Valeri V.

    1997-05-01

    Properly measured experimental Mueller matrix contains complete information on depolarization, anisotropy properties of studied object and on value of isotropic change of probated radiation intensity by studied object as well. They know that Jones matrix contains complete information on value of isotropic change of probated radiation intensity and on anisotropy properties of studied object. Thus, in the case of absent of depolarization and measurement errors reducing to existence of, so called, overpolarization there exist a one-to-one correspondence between Mueller and Jones matrix. Mueller matrix will then be called a Mueller-Jones matrix. The possibility of extraction of Mueller-Jones part out of any experimental Mueller matrix is extremely important because of following. First, it allows us to obtain everything about depolarization properties of studied object directly. Depolarization is very informative 'object' and now, in the majority, one knows little about its nature and methods of its complete description. Second, one gets the possibility to operate with correspondent Jones matrix to analyze of which there exist the powerful methods such as solving of the spectral problem and application of the decomposition theorem formerly proved by the present authors. The distinctive feature of the method proposed here is that it allows us in the best way to take into consideration the important fact that far from all elements of initial Mueller matrix contains information on depolarization.

  3. Final Safety Analysis Addenda to Hazards Summary Report, Experimental Breeder Reactor II (EBR-II): upgrading of plant protection system. Volume II

    SciTech Connect

    Allen, N. L.; Keeton, J. M.; Sackett, J. I.

    1980-06-01

    This report is the second in a series of compilations of the formal Final Safety Analysis Addenda (FSAA`s) to the EBR-II Hazard Summary Report and Addendum. Sections 2 and 3 are edited versions of the original FSAA`s prepared in support of certain modifications to the reactor-shutdown-system portion of the EBR-II plant-protection system. Section 4 is an edited version of the original FSAA prepared in support of certain modifications to a system classified as an engineered safety feature. These sections describe the pre- and postmodification system, the rationale for the modification, and required supporting safety analysis. Section 5 provides an updated description and analysis of the EBR-II emergency power system. Section 6 summarizes all significant modifications to the EBR-II plant-protection system to date.

  4. Environmental impact of pyrolysis of mixed WEEE plastics part 1: Experimental pyrolysis data.

    PubMed

    Alston, Sue M; Clark, Allan D; Arnold, J Cris; Stein, Bridget K

    2011-11-01

    Growth in waste electrical and electronic equipment (WEEE) is posing increasing problems of waste management, partly resulting from its plastic content. WEEE plastics include a range of polymers, some of which can be sorted and extracted for recycling. However a nonrecyclable fraction remains containing a mixture of polymers contaminated with other materials, and pyrolysis is a potential means of recovering the energy content of this. In preparation for a life cycle assessment of this option, described in part 2 of this paper set, data were collected from trials using experimental pyrolysis equipment representative of a continuous commercial process operated at 800 °C. The feedstock contained acrylonitrile-butadiene-styrene and high impact polystyrene with high levels of additives, and dense polymers including polyvinylchloride, polycarbonate, polyphenylene oxide, and polymethyl methacrylate. On average 39% was converted to gases, 36% to oils, and 25% remained as residue. About 35% of the gas was methane and 42% carbon monoxide, plus other hydrocarbons, oxygen and carbon dioxide. The oils were almost all aromatic, forming a similar mixture to fuel oil. The residue was mainly carbon with inorganic compounds from the plastic additives and most of the chlorine from the feedstock. The results showed that the process produced around 70% of the original plastic weight as potential fuel.

  5. Combustion chemistry and flame structure of furan group biofuels using molecular-beam mass spectrometry and gas chromatography - Part II: 2-Methylfuran.

    PubMed

    Tran, Luc-Sy; Togbé, Casimir; Liu, Dong; Felsmann, Daniel; Oßwald, Patrick; Glaude, Pierre-Alexandre; Fournet, René; Sirjean, Baptiste; Battin-Leclerc, Frédérique; Kohse-Höinghaus, Katharina

    2014-03-01

    This is Part II of a series of three papers which jointly address the combustion chemistry of furan and its alkylated derivatives 2-methylfuran (MF) and 2,5-dimethylfuran (DMF) under premixed low-pressure flame conditions. Some of them are considered to be promising biofuels. With furan as a common basis studied in Part I of this series, the present paper addresses two laminar premixed low-pressure (20 and 40 mbar) flat argon-diluted (50%) flames of MF which were studied with electron-ionization molecular-beam mass spectrometry (EI-MBMS) and gas chromatography (GC) for equivalence ratios φ=1.0 and 1.7, identical conditions to those for the previously reported furan flames. Mole fractions of reactants, products as well as stable and reactive intermediates were measured as a function of the distance above the burner. Kinetic modeling was performed using a comprehensive reaction mechanism for all three fuels given in Part I and described in the three parts of this series. A comparison of the experimental results and the simulation shows reasonable agreement, as also seen for the furan flames in Part I before. This set of experiments is thus considered to be a valuable additional basis for the validation of the model. The main reaction pathways of MF consumption have been derived from reaction flow analyses, and differences to furan combustion chemistry under the same conditions are discussed.

  6. Peak-summer East Asian rainfall predictability and prediction part II: extratropical East Asia

    NASA Astrophysics Data System (ADS)

    Yim, So-Young; Wang, Bin; Xing, Wen

    2016-07-01

    The part II of the present study focuses on northern East Asia (NEA: 26°N-50°N, 100°-140°E), exploring the source and limit of the predictability of the peak summer (July-August) rainfall. Prediction of NEA peak summer rainfall is extremely challenging because of the exposure of the NEA to midlatitude influence. By examining four coupled climate models' multi-model ensemble (MME) hindcast during 1979-2010, we found that the domain-averaged MME temporal correlation coefficient (TCC) skill is only 0.13. It is unclear whether the dynamical models' poor skills are due to limited predictability of the peak-summer NEA rainfall. In the present study we attempted to address this issue by applying predictable mode analysis method using 35-year observations (1979-2013). Four empirical orthogonal modes of variability and associated major potential sources of variability are identified: (a) an equatorial western Pacific (EWP)-NEA teleconnection driven by EWP sea surface temperature (SST) anomalies, (b) a western Pacific subtropical high and Indo-Pacific dipole SST feedback mode, (c) a central Pacific-El Nino-Southern Oscillation mode, and (d) a Eurasian wave train pattern. Physically meaningful predictors for each principal component (PC) were selected based on analysis of the lead-lag correlations with the persistent and tendency fields of SST and sea-level pressure from March to June. A suite of physical-empirical (P-E) models is established to predict the four leading PCs. The peak summer rainfall anomaly pattern is then objectively predicted by using the predicted PCs and the corresponding observed spatial patterns. A 35-year cross-validated hindcast over the NEA yields a domain-averaged TCC skill of 0.36, which is significantly higher than the MME dynamical hindcast (0.13). The estimated maximum potential attainable TCC skill averaged over the entire domain is around 0.61, suggesting that the current dynamical prediction models may have large rooms to improve

  7. Citrus fruits. Part II. Chemistry, technology, and quality evaluation. B. Technology.

    PubMed

    Ranganna, S; Govindarajan, V S; Ramana, K V

    1983-01-01

    In Part II of this review on citrus fruits, the literature on chemistry, technology, and quality evaluation are critically considered. Sweet oranges, mandarin, grapefruit, lemon, and lime are generally used for processing. The literature on chemical components of citrus fruit which include sugars, polysaccharides, organic acids, nitrogenous constituents and lipids; carotenoids which contribute to color; vitamins and minerals and flavonoids; limonoids, some of which impart bitterness to the juice; and the volatile components which contribute to aroma were reviewed in section A. Chilled and pasteurized juices, juice concentrates, and beverages are the important products manufactured commercially, and to a limited extent powdered citrus juices, canned segments, and marmalades. The literature on the manufacture of these products also as new types of juice and oil extractors; TASTE and other types of evaporators; tank farms to store juice and concentrate in bulk; aseptic filling in bulk containers and retail packs; alternate flexible and rigid containers other than glass and tin; and recovery of volatile flavoring constituents during juice processing are some of the important technological developments in the recent past and have been discussed in this section. Bitterness in citrus juices and its control, composition of cloud, and its stability and changes during storage have been reviewed. Essential oils, pectin, frozen and dried juice sacs, dried pulp and molasses, flavonoids, seed oil, and meal are the important byproducts, the manufacture of which is given in essential details. Generally, consumers judge the product on the basis of its sensory attributes. The quality of finished product is dependent upon the raw materials used and control of processes. In section C, the U.S. Department of Agriculture (USDA) standards for different products, physicochemical and microbiological parameters prescribed as indices of quality of fruit, juice, concentrate, and other

  8. A new coincidence model for single particle counters, Part II: Advances and applications.

    PubMed

    Knapp, J Z; Lieberman, A; Abramson, L R

    1994-01-01

    Accuracy, acceptance limits and methods for U.S.P. (788) contaminating particle assays published in the XXII Revision are refined in U.S.P. XXIII. In both Revisions, although different numerical values and methods are employed, particle contamination limits remain constants for all S.V.I. container volumes. The effect of this quality standard is high particle concentration acceptance limits in the smallest S.V.I. container sizes. The effect of these high concentrations is to introduce both undercount errors and false counts into U.S.P. (788) SVI contaminating particle assays. There is general agreement that the count of high concentrations of particles by a single particle light extinction counter result in an increase of the average size of the distribution of particles reported and a decrease in their total number. The error mechanism is termed "signal coincidence." Understanding and control of both these problems is unified with the introduction of the count efficiency parameter. Part I of this paper makes available two core concepts with which evaluation and control of coincidence error in single particle counters can be accurately quantified. These two core concepts are the "Particle Triggered Poisson Model," a new more accurate statistical model of the particle counting process and a concentration measure that includes the effect of particle size on the counting capability of a detector. Use of these concepts make it possible to evaluate particle detector count efficiency capability from experimental data of the coincidence effect. This is an application paper. It combines the theory in the Part I paper with the replicability of particle counters into a simple test protocol. The test results can be used to calculate a contour of particle size and count within which both undercount errors and the introduction of false counts into U.S.P. (788) particle assays are controlled. From the data analyzed it can be seen that any single particle size test cannot

  9. The upper cenozoic evolution of the Duero and Ebro fluvial systems (N-Spain): part I. paleogeography; part II. geomorphology

    NASA Astrophysics Data System (ADS)

    Mikeš, Daniel

    2010-09-01

    Lack of age dates in the terrigenous Cenozoic sediments of the Duero and the Ebro sedimentary basins has complicated tecto-stratic correlation across the two basins. We tentatively synthesize a range of existing studies and new data to construct a rough general paleogeography throughout Upper Cenozoic times. The more extensive erosion of the Ebro has been previously attributed to the earlier moment of opening. We tentatively analyse lithostratic data to conclude that the lower knick-point and different lithologies have also contributed to the deeper erosion in the Ebro Basin. We conclude from lithostratic data and field evidence that the W half of the Rioja was part of the Duero in earlier times and that the escarpment retreated westward through the Rioja in four subsequent episodes of erosion. The tilt of the NW Duero is a consequence of isostatic rebound to this erosion.

  10. Part I. Inviscid, swirling flows and vortex breakdown. Part II. A numerical investigation of the Lundgren turbulence model

    SciTech Connect

    Buntine, J.D.

    1994-12-31

    Part I. A study of the behaviour of an inviscid, swirling fluid is performed. This flow can be described by the Squire-Long equation if the constraints of time-independence and axisymmetry are invoked. The particular case of flow through a diverging pipe is selected and a study is conducted to determine over what range of parameters does a solution exist. The work is performed with a view to understanding how the phenomenon of vortex breakdown develops. Experiments and previous numerical studies have indicated that the flow is sensitive to boundary conditions particularly at the pipe inlet. A {open_quotes}quasi-cylindrical{close_quotes} amplification of the Squire-Long equation is compared with the more complete model and shown to be able to account for most of its behaviour. An advantage of this latter representation is the relatively undetailed description of the flow geometry it requires in order to calculate a solution. {open_quotes}Criticality{close_quotes} or the ability of small disturbances to propagate upstream is related to results of the quasi-cylindrical and axisymmetric flow models. This leads to an examination of claims made by researchers such as Benjamin and Hall concerning the interrelationship between {open_quotes}failure{close_quotes} of the quasi-cylindrical model and the occurrence of a {open_quotes}critical{close_quotes} flow state. Lundgren developed an analytical model for homogeneous turbulence based on a collection of contracting spiral vortices each embedded in an axisymmetric strain field. Using asymptotic approximations he was able to deduce the Kolmogorov k{sup {minus}5/3} behaviour for inertial scales in the turbulence energy spectrum. Pullin & Saffman have enlarged upon his work to make a number of predictions about the behaviour of turbulence described by the model. This work investigates the model numerically. The first part considers how the flow description compares with numerical simulations using the Navier-Stokes equations.

  11. Kinetic modeling of hardwood prehydrolysis. Part II. Xylan removal by dilute hydrochloric acid prehydrolysis

    SciTech Connect

    Connor, A.H.; Libkie, K.; Springer, E.L.

    1986-06-01

    A study was made of the kinetics of xylan hemicellulose removal with 0.10 M HCl at 120 degrees C from quaking aspen (Populus tremuloides), paper birch (Betula papyrifera), American elm (Ulmus americana), red maple (Acer rubrum), and southern red oak (Quercus falcata). The mathematical model developed in Part I to describe the kinetics of xylan removal by water prehydrolysis of these species could be used to model xylan removal with dilute hydrochloric acid. Xylan removal could thus be modelled as the sum of two parallel first-order reactions - one fast and one slow. However, unlike the case with water prehydrolysis where the rate constants for the fast and slow reaction processes could be correlated with each other, they could not be correlated for HCl prehydrolysis. Instead, these constant values determined for each species clustered about average values for all the species as a whole. A single set of parameters determined from a nonlinear least squares fit of the experimental prehydrolysis data for all the species as a whole to the model could be used to describe the course of xylan removal from all the species. The fact that one set of parameters could be used suggests that the same reactions are taking place on prehydrolysis and the chemical structure and physical morphology of the xylan hemicellulose were essentially the same in the species studied and probably in all temperate hardwood species. The model thus provides a good approximation of xylan removal from any temperate hardwood with dilute hydrochloric acid at the reaction conditions studied. 20 references.

  12. A review of biomass burning emissions part II: intensive physical properties of biomass burning particles

    NASA Astrophysics Data System (ADS)

    Reid, J. S.; Koppmann, R.; Eck, T. F.; Eleuterio, D. P.

    2005-03-01

    The last decade has seen tremendous advances in atmospheric aerosol particle research that is often performed in the context of climate and global change science. Biomass burning, one of the largest sources of accumulation mode particles globally, has been closely studied for its radiative, geochemical, and dynamic impacts. These studies have taken many forms including laboratory burns, in situ experiments, remote sensing, and modeling. While the differing perspectives of these studies have ultimately improved our qualitative understanding of biomass-burning issues, the varied nature of the work make inter-comparisons and resolutions of some specific issues difficult. In short, the literature base has become a milieu of small pieces of the biomass-burning puzzle. This manuscript, the second part of four, examines the properties of biomass-burning particle emissions. Here we review and discuss the literature concerning the measurement of smoke particle size, chemistry, thermodynamic properties, and emission factors. Where appropriate, critiques of measurement techniques are presented. We show that very large differences in measured particle properties have appeared in the literature, in particular with regards to particle carbon budgets. We investigate emissions uncertainties using scale analyses, which shows that while emission factors for grass and brush are relatively well known, very large uncertainties still exist in emission factors of boreal, temperate and some tropical forests. Based on an uncertainty analysis of the community data set of biomass burning measurements, we present simplified models for particle size and emission factors. We close this review paper with a discussion of the community experimental data, point to lapses in the data set, and prioritize future research topics.

  13. A review of biomass burning emissions, part II: Intensive physical properties of biomass burning particles

    NASA Astrophysics Data System (ADS)

    Reid, J. S.; Koppmann, R.; Eck, T. F.; Eleuterio, D. P.

    2004-09-01

    The last decade has seen tremendous advances in atmospheric aerosol particle research that is often performed in the context of climate and global change science. Biomass burning, one of the largest sources of accumulation mode particles globally, has been closely studied for its radiative, geochemical, and dynamic impacts. These studies have taken many forms including laboratory burns, in situ experiments, remote sensing, and modeling. While the differing perspectives of these studies have ultimately improved our qualitative understanding of biomass burning issues, the varied nature of the work make inter-comparisons and resolutions of some specific issues difficult. In short, the literature base has become a milieu of small pieces of the biomass-burning puzzle. This manuscript, the second part of four, examines the properties of biomass-burning particle emissions. Here we review and discuss the literature concerning the measurement of smoke particle size, chemistry, thermodynamic properties, and emission factors. Where appropriate, critiques of measurement techniques are presented. We show that very large differences in measured particle properties have appeared in the literature, in particular with regards to particle carbon budgets. We investigate emissions uncertainties using scale analyses, which shows that while emission factors for grass and brush are relatively well known, very large uncertainties still exist in emission factors of boreal, temperate and some tropical forests. Based on an uncertainty analysis of the community data set of biomass burning measurements, we present simplified models for particle size and emission factors. We close this review paper with a discussion of the community experimental data, point to lapses in the data set, and prioritize future research topics.

  14. Regulation of mitochondrial bioenergetic function by hydrogen sulfide. Part II. Pathophysiological and therapeutic aspects

    PubMed Central

    Módis, Katalin; Bos, Eelke M; Calzia, Enrico; van Goor, Harry; Coletta, Ciro; Papapetropoulos, Andreas; Hellmich, Mark R; Radermacher, Peter; Bouillaud, Frédéric; Szabo, Csaba

    2014-01-01

    Emerging work demonstrates the dual regulation of mitochondrial function by hydrogen sulfide (H2S), including, at lower concentrations, a stimulatory effect as an electron donor, and, at higher concentrations, an inhibitory effect on cytochrome C oxidase. In the current article, we overview the pathophysiological and therapeutic aspects of these processes. During cellular hypoxia/acidosis, the inhibitory effect of H2S on complex IV is enhanced, which may shift the balance of H2S from protective to deleterious. Several pathophysiological conditions are associated with an overproduction of H2S (e.g. sepsis), while in other disease states H2S levels and H2S bioavailability are reduced and its therapeutic replacement is warranted (e.g. diabetic vascular complications). Moreover, recent studies demonstrate that colorectal cancer cells up-regulate the H2S-producing enzyme cystathionine β-synthase (CBS), and utilize its product, H2S, as a metabolic fuel and tumour-cell survival factor; pharmacological CBS inhibition or genetic CBS silencing suppresses cancer cell bioenergetics and suppresses cell proliferation and cell chemotaxis. In the last chapter of the current article, we overview the field of H2S-induced therapeutic ‘suspended animation’, a concept in which a temporary pharmacological reduction in cell metabolism is achieved, producing a decreased oxygen demand for the experimental therapy of critical illness and/or organ transplantation. Linked Articles This article is part of a themed issue on Mitochondrial Pharmacology: Energy, Injury & Beyond. To view the other articles in this issue visit http://dx.doi.org/10.1111/bph.2014.171.issue-8 PMID:23991749

  15. Online sorting of recovered wood waste by automated XRF-technology: part II. Sorting efficiencies.

    PubMed

    Hasan, A Rasem; Solo-Gabriele, Helena; Townsend, Timothy

    2011-04-01

    Sorting of waste wood is an important process practiced at recycling facilities in order to detect and divert contaminants from recycled wood products. Contaminants of concern include arsenic, chromium and copper found in chemically preserved wood. The objective of this research was to evaluate the sorting efficiencies of both treated and untreated parts of the wood waste stream, and metal (As, Cr and Cu) mass recoveries by the use of automated X-ray fluorescence (XRF) systems. A full-scale system was used for experimentation. This unit consisted of an XRF-detection chamber mounted on the top of a conveyor and a pneumatic slide-way diverter which sorted wood into presumed treated and presumed untreated piles. A randomized block design was used to evaluate the operational conveyance parameters of the system, including wood feed rate and conveyor belt speed. Results indicated that online sorting efficiencies of waste wood by XRF technology were high based on number and weight of pieces (70-87% and 75-92% for treated wood and 66-97% and 68-96% for untreated wood, respectively). These sorting efficiencies achieved mass recovery for metals of 81-99% for As, 75-95% for Cu and 82-99% of Cr. The incorrect sorting of wood was attributed almost equally to deficiencies in the detection and conveyance/diversion systems. Even with its deficiencies, the system was capable of producing a recyclable portion that met residential soil quality levels established for Florida, for an infeed that contained 5% of treated wood.

  16. An Interactive Activation Model of the Effect of Context in Perception. Part II. Report No. 8003.

    ERIC Educational Resources Information Center

    Rumelhart, David E.; McClelland, James L.

    This report is the second in a two-part series introducing an interactive activation model of context effects in perception. In the first part, a model for the perception of letters in words and other contexts was described and applied to a number of experiments. This second part applies the same model to a number of new experiments designed to…

  17. Mixed Layer Depth in the Aegean, Marmara, Black and Azov Seas: Part II: Relation to the Sonic Layer Depth

    DTIC Science & Technology

    2009-03-03

    r.com/ locate / jmarsysMixed layer depth in the Aegean, Marmara, Black and Azov Seas : Part II: Relation to the sonic layer depth Robert W. Helber a...index terms: The Aegean Sea The Black Sea The Azov Sea Keywords: Sound transmission Mixed layer depth Climatologyt analysis of the seasonal evolution of...the sonic layer depth (SLD) relative to the mixed layer depth (MLD) for the Aegean, Marmara, Black, and Azov Seas . SLD identifies the acoustic ducting

  18. Dynamic regime marginal structural mean models for estimation of optimal dynamic treatment regimes, Part II: proofs of results.

    PubMed

    Orellana, Liliana; Rotnitzky, Andrea; Robins, James M

    2010-03-03

    In this companion article to "Dynamic Regime Marginal Structural Mean Models for Estimation of Optimal Dynamic Treatment Regimes, Part I: Main Content" [Orellana, Rotnitzky and Robins (2010), IJB, Vol. 6, Iss. 2, Art. 7] we present (i) proofs of the claims in that paper, (ii) a proposal for the computation of a confidence set for the optimal index when this lies in a finite set, and (iii) an example to aid the interpretation of the positivity assumption.

  19. Dynamic Regime Marginal Structural Mean Models for Estimation of Optimal Dynamic Treatment Regimes, Part II: Proofs of Results*

    PubMed Central

    Orellana, Liliana; Rotnitzky, Andrea; Robins, James M.

    2010-01-01

    In this companion article to “Dynamic Regime Marginal Structural Mean Models for Estimation of Optimal Dynamic Treatment Regimes, Part I: Main Content” [Orellana, Rotnitzky and Robins (2010), IJB, Vol. 6, Iss. 2, Art. 7] we present (i) proofs of the claims in that paper, (ii) a proposal for the computation of a confidence set for the optimal index when this lies in a finite set, and (iii) an example to aid the interpretation of the positivity assumption. PMID:20405047

  20. Advanced control strategies for HVAC&R systems—An overview: Part II: Soft and fusion control

    SciTech Connect

    D. Subbaram Naidu; Craig G. Rieger

    2011-04-01

    A chronological overview of the advanced control strategies for HVAC&R is presented. The overview focuses on hard-computing or control techniques, such as proportional-integral-derivative, optimal, nonlinear, adaptive, and robust; soft-computing or control techniques, such as neural networks, fuzzy logic, genetic algorithms; and the fusion or hybrid of hard and soft control techniques. Part I focused on hardcontrol strategies; Part II focuses on soft and fusion control and some future directions in HVA&R research. This overview is not intended to be an exhaustive survey on this topic, and any omissions of other works is purely unintentional.

  1. Part I. Metabolites of Penicillium verrucosum var. cyclopium; Part II. Regioselective deuteriations of deoxyribose and incorporation into deoxynucleosides

    SciTech Connect

    Hodge, R.P.

    1988-01-01

    Penicillium verrucosum var. cyclopium is the fungus responsible for several outbreaks of neurotoxicoses among cattle in Tennessee beginning in 1979. Verrucosidin isolated from samples of P. verrucosum var. cyclopium was later shown to be a powerful neurotoxin capable of paralyzing its victims and was also said to cause tremoring in some cases. Part I of this dissertation describes the re-investigation of metabolites of P. verrucosum var. cyclopium and tremorgenicity of verrucosidin. Verrucosidin has been shown in this study to be non-tremorgenic. This research also describes development of efficient synthetic methods for incorporation of deuterium into the deoxyribose moiety of deoxyribonucleosides. Deuteriated deoxynucleosides are presently being considered for synthesis of deuteriated sequences of DNA to be utilized in {sup 1}H NMR studies of solution conformation and dynamics, as well as interactions with proteins, drugs, metals and carcinogens. A route for synthesizing 2-deoxy-D-ribose from D-ribonic-acid-{gamma}-lactone incorporating deuterium at the C-1, C-2 or C-5 positions is presented.

  2. Land-Grant College Education 1910 to 1920. Part II: The Liberal Arts and Sciences Including Miscellaneous Subjects and Activities. Bulletin, 1924, No. 37

    ERIC Educational Resources Information Center

    John, Walton C., Ed.

    1925-01-01

    This survey of land-grant college education is divided into five sections, published separately as follows: Part I: History and Educational Objectives of Land-Grant College Education; Part II: The Liberal Arts and Sciences and Miscellaneous Subjects in Land-Grant Colleges; Part III: Agricultural Education in Land-Grant Colleges; Part IV:…

  3. Experimental and theoretical approaches for Cd(II) biosorption from aqueous solution using Oryza sativa biomass.

    PubMed

    Fawzy, Manal; Nasr, Mahmoud; Helmi, Shacker; Nagy, Heba

    2016-11-01

    Biomass of Oryza sativa (OS) was tested for the removal of Cd(II) ions from synthetic and real wastewater samples. Batch experiments were conducted to investigate the effects of operating parameters on Cd(II) biosorption. Fourier transform infrared spectroscopy, scanning electron microscopy, and energy-dispersive x-ray spectroscopy were used to examine the surface characteristics of the Cd(II)-loaded biomass. The maximum removal efficiency of Cd(II) was 89.4% at optimum pH 6.0, biosorbent dose 10.0 g L(-1), initial Cd(II) 50 mg L(-1), and biosorbent particle size 0.5 mm. The applicability of Langmuir and Freundlich isotherms to the sorbent system implied the existence of both monolayer and heterogeneous surface conditions. Kinetic studies revealed that the adsorption process of Cd(II) followed the pseudo-second-order model (r2: 0.99). On the theoretical side, an adaptive neuro-fuzzy inference system (ANFIS) was applied to select the operating parameter that mostly influences the Cd(II) biosorption process. Results from ANFIS indicated that pH was the most influential parameter affecting Cd(II) removal efficiency, indicating that the biomass of OS was strongly pH sensitive. Finally, the biomass was confirmed to adsorb Cd(II) from real wastewater samples with removal efficiency close to 100%. However, feasibility studies of such systems on a large-scale application remain to be investigated.

  4. Numerical and experimental analysis of factors leading to suture dehiscence after Billroth II gastric resection.

    PubMed

    Cvetkovic, Aleksandar M; Milasinovic, Danko Z; Peulic, Aleksandar S; Mijailovic, Nikola V; Filipovic, Nenad D; Zdravkovic, Nebojsa D

    2014-11-01

    The main goal of this study was to numerically quantify risk of duodenal stump blowout after Billroth II (BII) gastric resection. Our hypothesis was that the geometry of the reconstructed tract after BII resection is one of the key factors that can lead to duodenal dehiscence. We used computational fluid dynamics (CFD) with finite element (FE) simulations of various models of BII reconstructed gastrointestinal (GI) tract, as well as non-perfused, ex vivo, porcine experimental models. As main geometrical parameters for FE postoperative models we have used duodenal stump length and inclination between gastric remnant and duodenal stump. Virtual gastric resection was performed on each of 3D FE models based on multislice Computer Tomography (CT) DICOM. According to our computer simulation the difference between maximal duodenal stump pressures for models with most and least preferable geometry of reconstructed GI tract is about 30%. We compared the resulting postoperative duodenal pressure from computer simulations with duodenal stump dehiscence pressure from the experiment. Pressure at duodenal stump after BII resection obtained by computer simulation is 4-5 times lower than the dehiscence pressure according to our experiment on isolated bowel segment. Our conclusion is that if the surgery is performed technically correct, geometry variations of the reconstructed GI tract by themselves are not sufficient to cause duodenal stump blowout. Pressure that develops in the duodenal stump after BII resection using omega loop, only in the conjunction with other risk factors can cause duodenal dehiscence. Increased duodenal pressure after BII resection is risk factor. Hence we recommend the routine use of Roux en Y anastomosis as a safer solution in terms of resulting intraluminal pressure. However, if the surgeon decides to perform BII reconstruction, results obtained with this methodology can be valuable.

  5. Experimental Study Of SHEFEX II Hypersonic Aerodynamics And Canard Efficiency In H2K

    NASA Astrophysics Data System (ADS)

    Neeb, D.; Gulhan, A.

    2011-05-01

    One main objective of the DLR SHEFEX programme is to prove that sharp edged vehicles are capable of performing a re-entry into earth atmosphere by using a simple thermal protection system consisting of flat ceramic tiles. In comparison to blunt nose configurations like the Space shuttle, which are normally used for re-entry configurations, the SHEFEX TPS design is able to significantly reduce the costs and complexity of TPS structures and simultaneously increase the aerodynamic performance of the flight vehicle [1], [2]. To study its characteristics and perform several defined in-flight experiments during re-entry, the vehicle’s attitude will be controlled actively by canards [3]. In the framework of the SHEFEX II project an experimental investigation has been conducted in the hypersonic wind tunnel H2K to characterize the aerodynamic performance of the vehicle in hypersonic flow regime. The model has a modular design to enable the study of a variety of different influencing parameters. Its 4 circumferential canards have been made independently adjustable to account for the simulation of different manoeuvre conditions. To study the control behaviour of the vehicle and validate CFD data, a variation of canard deflections, angle of attack and angle of sideslip have been applied. Tests have been carried out at Mach 7 and 8.7 with a Reynolds number sensitivity study at the lower Mach number. The model was equipped with a six component internal balance to realize accurate coefficient measurements. The flow topology has been analyzed using Schlieren images. Beside general aerodynamic performance and canard efficiencies, flow phenomena like shock impingement on the canards could be determined by Schlieren images as well as by the derived coefficients.

  6. Strategic Petroleum Reserve (SPR) oil storage cavern sulphur mines 2-4-5 certification tests and analysis. Part I: 1981 testing. Part II: 1982 testing

    SciTech Connect

    Beasley, R.R.

    1982-12-01

    Well leak tests and a cavern pressure were conducted in June through December 1981, and are described in Part I. The tests did not indicate conclusively that there was no leakage from the cavern, but the data indicate that cavern structural failure during oil storage is unlikely. The test results indicated that retesting and well workover were desirable prior to making a decision on the cavern use. Well leak tests were conducted in March through May 1982, and are described in Part II. The tests indicated that there was no significant leakage from wells 2 and 4 but that the leakage from wells 2A and 5 exceeded the DOE criterion. Because of the proximity of cavern 2-4-5 to the edge of the salt, this cavern should be considered for only one fill/withdrawal cycle prior to extensive reevaluation. 57 figures, 17 tables.

  7. DOE program guide for universities and other research groups. Part I. DOE Research and Development Programs; Part II. DOE Procurement and Assistance Policies/Procedures

    SciTech Connect

    Not Available

    1980-03-01

    This guide addresses the DOE responsibility for fostering advanced research and development of all energy resources, both current and potential. It is intended to provide, in a single publication, all the fundamental information needed by an institution to develop a potential working relationship with DOE. Part I describes DOE research and development programs and facilities, and identifies areas of additional research needs and potential areas for new research opportunities. It also summarizes budget data and identifies the DOE program information contacts for each program. Part II provides researchers and research administrators with an introduction to the DOE administrative policies and procedures for submission and evaluation of proposals and the administration of resulting grants, cooperative agreements, and research contracts. (RWR)

  8. Further considerations on the evaluation of potential reduced-risk tobacco products. Part II: Re-assessment of a heuristic using the CPS-II database.

    PubMed

    Murrelle, Lenn; Coggins, Christopher R E; Gennings, Chris; Carchman, Richard A; Lee, Peter N; Zedler, Barbara K; Heidbreder, Christian

    2010-06-01

    In a previous analysis (see Part I) we proposed a heuristic for assessing the efficacy of potential reduced-risk tobacco products (PRRPs) on lung cancer (LC) rates, using smoking cessation data published in a report from the Iowa Women's Health Study (IWHS) as a basis for sample size estimates. In this study, an additional analysis was performed using cessation data from the much larger Cancer Prevention Study II (CPS-II), which also provides data on different durations of cessation. Statistical methods were used to assess whether smokers switching to a PRRP would reduce their risk of LC. Furthermore, non-inferiority tests compared the LC risk in switchers to that in smokers who had quit smoking. The present work shows that similar sample size estimates were obtained whether the analysis was based on the IWHS or the CPS-II data sets, suggesting that the heuristic may be generally applicable to prospective real-life studies to evaluate PRRPs. Non-inferiority testing of switchers compared with quitters required approximately 10-fold more subjects than did superiority testing of switchers compared with smokers. Altogether, these estimates indicate that it is feasible, in terms of study duration and sample size, to clinically assess the LC risk-reducing potential of a PRRP.

  9. Human Rehabilitation Techniques. Disability Analyses: Chronic Disease Disabilities. Volume II, Part C.

    ERIC Educational Resources Information Center

    Sigelman, C.; And Others

    Volume II, Section C of a six-volume final report (which covers the findings of a research project on policy and technology related to rehabilitation of disabled individuals) presents a review of literature on six types of chronic disease disabilities--rheumatoid arthritis, coronary heart disease, emphysema, carcinoma of the colon/rectum, kidney…

  10. Airflow analyses using thermal imaging in Arizona's Meteor Crater as part of METCRAX II

    NASA Astrophysics Data System (ADS)

    Grudzielanek, A. Martina; Vogt, Roland; Cermak, Jan; Maric, Mateja; Feigenwinter, Iris; Whiteman, C. David; Lehner, Manuela; Hoch, Sebastian W.; Krauß, Matthias G.; Bernhofer, Christian; Pitacco, Andrea

    2016-04-01

    In October 2013 the second Meteor Crater Experiment (METCRAX II) took place at the Barringer Meteorite Crater (aka Meteor Crater) in north central Arizona, USA. Downslope-windstorm-type flows (DWF), the main research objective of METCRAX II, were measured by a comprehensive set of meteorological sensors deployed in and around the crater. During two weeks of METCRAX II five infrared (IR) time lapse cameras (VarioCAM® hr research & VarioCAM® High Definition, InfraTec) were installed at various locations on the crater rim to record high-resolution images of the surface temperatures within the crater from different viewpoints. Changes of surface temperature are indicative of air temperature changes induced by flow dynamics inside the crater, including the DWF. By correlating thermal IR surface temperature data with meteorological sensor data during intensive observational periods the applicability of the IR method of representing flow dynamics can be assessed. We present evaluation results and draw conclusions relative to the application of this method for observing air flow dynamics in the crater. In addition we show the potential of the IR method for METCRAX II in 1) visualizing airflow processes to improve understanding of these flows, and 2) analyzing cold-air flows and cold-air pooling.

  11. Human Rehabilitation Techniques. Disability Analyses: Behavioral Disabilities. Volume II, Part B.

    ERIC Educational Resources Information Center

    Sigelman, C.; And Others

    Volume II, Section B of a six-volume final report (which covers the findings of a research project on policy and technology related to rehabilitation of disabled individuals) presents a review of literature on three types of behavior disabilities--epilepsy, mental retardation, and schizophrenia. Individual chapters on each disability cover the…

  12. AUTOMOTIVE DIESEL MAINTENANCE 2. UNIT XV, UNDERSTANDING DC GENERATOR PRINCIPLES (PART II).

    ERIC Educational Resources Information Center

    Human Engineering Inst., Cleveland, OH.

    THIS MODULE OF A 25-MODULE COURSE IS DESIGNED TO DEVELOP AN UNDERSTANDING OF MAINTENANCE PROCEDURES FOR DIRECT CURRENT GENERATORS USED ON DIESEL POWERED EQUIPMENT. TOPICS ARE SPECIAL GENERATOR CIRCUITS, GENERATOR TESTING, AND GENERATOR POLARITY. THE MODULE CONSISTS OF A SELF-INSTRUCTIONAL PROGRAMED TRAINING FILM "DC GENERATORS II--GENERATOR…

  13. Experimental and DFT characterization, antioxidant and anticancer activities of a Cu(II)-irbesartan complex: structure-antihypertensive activity relationships in Cu(II)-sartan complexes.

    PubMed

    Islas, María S; Luengo, Alicia; Franca, Carlos A; Merino, Mercedes Griera; Calleros, Laura; Rodriguez-Puyol, Manuel; Lezama, Luis; Ferrer, Evelina G; Williams, Patricia A M

    2016-10-01

    The coordination compound of the antihypertensive ligand irbesartan (irb) with copper(II) (CuIrb) was synthesized and characterized by FTIR, FT-Raman, UV-visible, reflectance and EPR spectroscopies. Experimental evidence allowed the implementation of structural and vibrational studies by theoretical calculations made in the light of the density functional theory (DFT). This compound was designed to induce structural modifications on the ligand. No antioxidant effects were displayed by both compounds, though CuIrb behaved as a weak 1,1-diphenyl-2-picrylhydrazyl radical (DPPH(·)) scavenger (IC50 = 425 μM). The measurements of the contractile capacity on human mesangial cell lines showed that CuIrb improved the antihypertensive effects of the parent medication. In vitro cell growth inhibition against prostate cancer cell lines (LNCaP and DU 145) was measured for CuIrb, irbesartan and copper(II). These cell lines have been selected since the angiotensin II type 1 (AT1) receptor (that was blocked by the angiotensin receptor blockers, ARB) has been identified in them. The complex exerted anticancer behavior (at 100 μM) improving the activity of the ligand. Flow cytometry determinations were used to determine late apoptotic mechanisms of cell death. Experimental and DFT characterization of an irbesartan copper(II) complex has been performed. The complex exhibits low scavenging activity against DPPH(·) and significant growth inhibition of LNCaP and DU 145 prostate cancer cell lines. Flow cytometry determinations were used to determine late apoptotic mechanisms of cell death. This compound improved the antihypertensive effect of irbesartan. This effect was observed earlier for the mononuclear Cu-candesartan complex, but not in structurally modified sartans forming dinuclear or octanuclear Cu-sartan compounds.

  14. Heat Transfer in a Complex Trailing Edge Passage for a High Pressure Turbine Blade - Part 1: Experimental Measurements. Part 1; Experimental Measurements

    NASA Technical Reports Server (NTRS)

    Bunker, Ronald S.; Wetzel, Todd G.; Rigby, David L.; Reddy, D. R. (Technical Monitor)

    2000-01-01

    A combined experimental and computational study has been performed to investigate the detailed heat transfer coefficient distributions within a complex blade trailing edge passage. The experimental measurements are made using a steady liquid crystal thermography technique applied to one major side of the passage. The geometry of the trailing edge passage is that of a two-pass serpentine circuit with a sharp 180-degree turning region at the tip. The upflow channel is split by interrupted ribs into two major subchannels, one of which is turbulated. This channel has an average aspect ratio of roughly 14:1. The spanwise extent of the channel geometry includes both area convergence from root to tip, as well as taper towards the trailing edge apex. The average section Reynolds numbers tested in this upflow channel range from 55,000 to 98,000. The tip section contains a turning vane near the extreme comer. The downflow channel has an aspect ratio of about 5:1, and also includes convergence and taper. Turbulators of varying sizes are included in this channel also. Both detailed heat transfer and pressure distribution measurements are presented. The pressure measurements are incorporated into a flow network model illustrating the major loss contributors.

  15. The Assessment of Teaching in Higher Education: A Critical Retrospect and a Proposal. Part II: A Proposal

    ERIC Educational Resources Information Center

    Johnson, Henry C., Jr.; And Others

    1975-01-01

    Develops two models used as the basis for the proposed Teaching Assessment Program (TAP): a 4-stage gnometectonic (process of coming-to-know) model of teaching and a model of intellectual development. Describes experimental use of teacher and student report forms for the TAP. ("Part I: A Critical Retrospect" is EJ 116-234.) (JT)

  16. Virtual and experimental high-throughput screening (HTS) in search of novel inosine 5'-monophosphate dehydrogenase II (IMPDH II) inhibitors

    NASA Astrophysics Data System (ADS)

    Dunkern, Torsten; Prabhu, Arati; Kharkar, Prashant S.; Goebel, Heike; Rolser, Edith; Burckhard-Boer, Waltraud; Arumugam, Premkumar; Makhija, Mahindra T.

    2012-11-01

    IMPDH (Inosine 5'-monophosphate dehydrogenase) catalyzes a rate-limiting step in the de novo biosynthesis of guanine nucleotides. IMPDH inhibition in sensitive cell types (e.g., lymphocytes) blocks proliferation (by blocking RNA and DNA synthesis as a result of decreased cellular levels of guanine nucleotides). This makes it an interesting target for cancer and autoimmune disorders. Currently available IMPDH inhibitors such as mycophenolic acid (MPA, uncompetitive inhibitor) and nucleoside analogs (e.g., ribavirin, competitive inhibitor after intracellular activation by phosphorylation) have unfavorable tolerability profiles which limit their use. Hence, the quest for novel IMPDH inhibitors continues. In the present study, a ligand-based virtual screening using IMPDH inhibitor pharmacophore models was performed on in-house compound collection. A total of 50,000 virtual hits were selected for primary screen using in vitro IMPDH II inhibition up to 10 μM. The list of 2,500 hits (with >70 % inhibition) was further subjected to hit confirmation for the determination of IC50 values. The hits obtained were further clustered using maximum common substructure based formalism resulting in 90 classes and 7 singletons. A thorough inspection of these yielded 7 interesting classes in terms of mini-SAR with IC50 values ranging from 0.163 μM to little over 25 μM. The average ligand efficiency was found to be 0.3 for the best class. The classes thus discovered represent structurally novel chemotypes which can be taken up for further development.

  17. Instrumentation: Photodiode Array Detectors in UV-VIS Spectroscopy. Part II.

    ERIC Educational Resources Information Center

    Jones, Dianna G.

    1985-01-01

    A previous part (Analytical Chemistry; v57 n9 p1057A) discussed the theoretical aspects of diode ultraviolet-visual (UV-VIS) spectroscopy. This part describes the applications of diode arrays in analytical chemistry, also considering spectroelectrochemistry, high performance liquid chromatography (HPLC), HPLC data processing, stopped flow, and…

  18. Affirmatives and Negatives of Space-Career Prospects-Part II.

    ERIC Educational Resources Information Center

    Bole-Becker, Luanne C.

    1990-01-01

    The second part of a two-part series on careers in the space program discusses the academic credentials and experience required for various career paths within the space industry. NASA-sponsored cooperative training and research programs for undergraduate and graduate students are listed and discussed. (TE)

  19. CONTEMPORARY ARABIC READERS--II. ARABIC ESSAYS, PART 2. NOTES AND GLOSSARIES.

    ERIC Educational Resources Information Center

    MCCARUS, ERNEST N.; AND OTHERS

    "PART 2" OF THE SECOND VOLUME OF THE "CONTEMPORARY ARABIC READERS" SERIES CONTAINS THE GRAMMATICAL NOTES AND INDIVIDUAL ARABIC-ENGLISH GLOSSARIES FOR THE ESSAYS INCLUDED IN "PART 1." PREFACING EACH GLOSSARY IS A SHORT BIOGRAPHICAL NOTE ON THE AUTHOR OF THE ESSAY. ALL WORDS OF THE FIRST TEN SELECTIONS ARE GLOSSED EXCEPT FOR THE FIRST 200 ITEMS IN…

  20. The Lesson of Hiroshima and Nagasaki. Part II: The Present and Future.

    ERIC Educational Resources Information Center

    Kauffman, George B.

    1985-01-01

    Part I (SE 537 587) briefly reviewed the scientific discoveries underlying the atomic bomb and its technological development. This part examines the implications of these events for science education. Areas considered include the nuclear arms race, nuclear winter, the Strategic Defense Initiative, and others. (DH)

  1. ORIENTATION CLASSES FOR IN-MIGRANT TRANSIENT CHILDREN. A FIRST REPORT, PART II.

    ERIC Educational Resources Information Center

    PONDER, EDDIE G.; AND OTHERS

    A 3-YEAR STUDY OF THE ORIENTATION OF IMMIGRANT TRANSIENT CHILDREN WAS INITIATED IN SEPTEMBER, 1960. PART ONE GIVES AN OVERVIEW OF THE PROJECT FOR THE SCHOOL YEAR 1961-61. IT REVIEWS THE ORGANIZATION OF THE ORIENTATION CLASSES, THE INSERVICE PROGRAM, COMMUNITY ORIENTATION, AND REPORTS OF SPECIAL SERVICES GIVEN TO THE PROJECT CLASSES. PART TWO…

  2. Intermediate Mathematics, Student's Text, Part II, Unit No. 18. Revised Edition.

    ERIC Educational Resources Information Center

    Allen, Frank B.; And Others

    This is part two of a two-part SMSG intermediate mathematics text for high school students. The aim of the text is to focus attention on mathematical ideas which are appropriate for study by college-capable students in the eleventh grade. Chapter topics include number systems, an introduction to coordinate geometry in the plane, the function…

  3. Elementary Metric Curriculum - Project T.I.M.E. (Timely Implementation of Metric Education). Part II.

    ERIC Educational Resources Information Center

    Community School District 18, Brooklyn, NY.

    This is the second part of a two-part teacher's manual for an ISS-based elementary school course in the metric system. Behavioral objectives and student activities are included. Topics include: (1) capacity; (2) calculation of volume and surface area of cylinders and cones; (3) mass; (4) temperature; and (5) metric conversions. (BB)

  4. REMOTE SENSING TOOLS ASSIST IN ENVIRONMENTAL FORENSICS PART II - DIGITAL TOOLS

    EPA Science Inventory

    This is part two of a two-part discussion, in which we will provide an overview of the use of GIS and GPS in environmental analysis and enforcement.

    GIS describes a system that manages, analyzes and displays geographic information. Environmental applications include anal...

  5. Basic Metrics--Part I, II and III. Teacher's Guide [and] Student Materials.

    ERIC Educational Resources Information Center

    Noyes, Joan

    Individualized classroom activities for use in learning centers to teach junior and senior high school students about the metric system are provided. The activities are organized into three sequential parts, each of which takes from four to six hours to complete. There is a teacher's guide and a student booklet for each part. The teachers' guides…

  6. Off-normal performance of EBR-II (Experimental Breeder Reactor) driver fuel

    SciTech Connect

    Seidel, B.R.; Batte, G.L.; Lahm, C.E.; Fryer, R.M.; Koenig, J.F.; Hofman, G.L.

    1986-09-01

    The off-normal performance of EBR-II Mark-II driver fuel has been more than satisfactory as demonstrated by robust reliability under repeated transient overpower and undercooled loss-of-flow tests, by benign run-beyond-cladding-breach behavior, and by forgiving response to fabrication defects including lack of bond. Test results have verified that the metallic driver fuel is very tolerant of off-normal events. This behavior has allowed EBR-II to operate in a combined steady-state and transient mode to provide test capability without limitation from the metallic driver fuel.

  7. The Shock and Vibration Bulletin. Part 4. Prediction and Experimental Techniques, Isolation and Damping

    DTIC Science & Technology

    1973-06-01

    FREQUENCY ( Htl Figure 8 - Main Strut Torsional and Bending Response Spectrum. Torsional Initial Load 3 4 5 S FREQUENCY IHil #’■ *1 CHANNEL I...C II Crosslinking C SMRD 100 60 Crosslinked Clear Compo Effect 1 SMRD 104 90 Crosshnked Clear Compo III Plaslk izer HH>» 20 40 5 Plastiozed C...evaluate the consistency of the formulations. Group II samples were made to investigate the effect of adding a crosslinker to the base resin. It was

  8. Filtrates & Residues: Experimental Work with Tin (II) Chloride in a High School.

    ERIC Educational Resources Information Center

    Sanchez, Manuela Martin

    1988-01-01

    Presents a high school chemistry lab experiment using tin (II) chloride to explore the concepts of hydrolysis, Le Chatelier's principle, and electrolysis. Presents methodology and the chemistry involved. Offers questions for the students. (MVL)

  9. An analytical and experimental stress analysis of a practical mode II fracture-test specimen

    NASA Technical Reports Server (NTRS)

    Chisholm, D. B.; Jones, D. L.

    1975-01-01

    A boundary collocation method has been employed to determine the Mode II stress intensity factors for a pair of through-the-thickness edge cracks in a finite isotropic plate. An elastostatic analysis has been carried out in terms of the complete Williams stress function employing both even and odd components. The results of the numerical analysis were verified by a two-step procedure whereby the symmetric and antisymmetric portions of the solution were independently compared with existing solutions. The complete solution was verified by comparison with a photoelastic analysis. A compact shear specimen (CSS) of Hysol epoxy resin was loaded in a photoelastic experiment designed to study the isochromatic fringe patterns resulting from the Mode II crack tip stress distribution. The experiment verified that a pure Mode II stress distribution existed in the neighborhood of the crack tips and confirmed the accuracy of the boundary collocation solution for the Mode II stress intensity factors.

  10. DETECTORS AND EXPERIMENTAL METHODS: Online measurement of the BEPC II background using RadFET dosimeters

    NASA Astrophysics Data System (ADS)

    Gong, Hui; Li, Jin; Gong, Guang-Hua; Li, Yu-Xiong; Hou, Lei; Shao, Bei-Bei

    2009-09-01

    To monitor the integral dose deposited in the BESIII electromagnetic calorimeter whose performance degrades due to exposure to the BEPC II background, a 400 nm IMPL RadFET dosimeter-based integral dose online monitor system is built. After calibration with the 60Co source and verification with TLD in the pulse radiation fields, an experiment was arranged to measure the BEPC II background online. The results are presented.

  11. Polycyclic aromatic hydrocarbons in Danish leafy crops. Part I: PAH in kale and beets relate to point sources of PAH. Part II: a survey of PAH in commercial grown fresh and deep-frozen kale

    SciTech Connect

    Vahl, M.; Beck, J.; Stoebet, M.

    1982-01-01

    Part I discusses the investigation of Polycyclic Aromatic Hydrocarbons (PAH) has been to demonstrate the possible pollution of leafy vegetables from expected PAH-emmissions, and to compare with similar investigations in Scandinavia. Part II is a survey has been to establish levels of PAH to which consumers are normally exposed from intake of fruits and above ground parts of vegetables.

  12. Experimental studies of transpiration cooling with shock interaction in hypersonic flow, part B

    NASA Technical Reports Server (NTRS)

    Holden, Michael S.

    1994-01-01

    This report describes the result of experimental studies conducted to examine the effects of the impingement of an oblique shock on the flowfield and surface characteristics of a transpiration-cooled wall in turbulent hypersonic flow. The principal objective of this work was to determine whether the interaction between the oblique shock and the low-momentum region of the transpiration-cooled boundary layer created a highly distorted flowfield and resulted in a significant reduction in the cooling effectiveness of the transpiration-cooled surface. As a part of this program, we also sought to determine the effectiveness of transpiration cooling with nitrogen and helium injectants for a wide range of blowing rates under constant-pressure conditions in the absence of shock interaction. This experimental program was conducted in the Calspan 48-Inch Shock Tunnel at nominal Mach numbers of 6 and 8, for a Reynolds number of 7.5 x 10(exp 6). For these test conditions, we obtained fully turbulent boundary layers upstream of the interaction regions over the transpiration-cooled segment of the flat plate. The experimental program was conducted in two phases. In the first phase, we examined the effects of mass-addition level and coolant properties on the cooling effectiveness of transpiration-cooled surfaces in the absence of shock interaction. In the second phase of the program, we examined the effects of oblique shock impingement on the flowfield and surface characteristics of a transpiration-cooled surface. The studies were conducted for a range of shock strengths with nitrogen and helium coolants to examine how the distribution of heat transfer and pressure and the characteristics of the flowfield in the interaction region varied with shock strength and the level of mass addition from the transpiration-cooled section of the model. The effects of the distribution of the blowing rate along the interaction regions were also examined for a range of blowing rates through the

  13. 48 CFR 15.204-3 - Part II-Contract Clauses.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... CONTRACTING METHODS AND CONTRACT TYPES CONTRACTING BY NEGOTIATION Solicitation and Receipt of Proposals and Information 15.204-3 Part II—Contract Clauses. Section I, Contract clauses. The contracting officer...

  14. Home on the Big River, Part II: Great River Habitat Quality Indices

    EPA Science Inventory

    USEPA’s EMAP sampled the Upper Mississippi, Missouri, and Ohio Rivers from 2004 through 2006 as part of an integrated assessment of ecological condition. These Great Rivers are important human recreational destinations and transportation corridors, and represent significant wild...

  15. The flipped classroom for professional development: part II. making podcasts and videos.

    PubMed

    Smith, Charlene M; McDonald, Katie

    2013-11-01

    As described in Part I, podcasts and videos are educational technologies used to flip the classroom. This column describes the technology options for creating podcasts and videos and offers tips on developing podcasts and videos.

  16. Multibody Graph Transformations and Analysis Part II: Closed-chain constraint embedding

    PubMed Central

    Jain, Abhinandan

    2011-01-01

    This is the second part of a two-part paper that develops graph theoretic techniques for the topological transformation and analysis of multibody system dynamics. The first part focused on tree systems, and developed systematic and rigorous techniques for the partitioning, aggregation and sub-structuring of multibody dynamics models. This second part, uses the aggregation techniques as the foundation to develop the constraint-embedding technique that enables the transformation of the non-tree system graphs into tree graphs. This enables the application of a large family of analytical and computational techniques for trees to closed-chain systems. This is illustrated through an extension of the low-order articulated-body forward dynamics algorithm for tree systems to closed-chain systems. PMID:22267894

  17. Machinability of Green Powder Metallurgy Components: Part II. Sintered Properties of Components Machined in Green State

    NASA Astrophysics Data System (ADS)

    Robert-Perron, Etienne; Blais, Carl; Pelletier, Sylvain; Thomas, Yannig

    2007-06-01

    The green machining process is virtually a must if the powder metallurgy (PM) industries are to solve the lower machining performances associated with PM components. This process is known for lowering the rate of tool wear. Recent improvements in binder/lubricant technologies have led to high-green-strength systems that enable green machining. Combined with the optimized cutting parameters determined in Part I of the study, the green machining of PM components seems to be a viable process for fabricating high performance parts on large scale and complete other shaping processes. This second part of our study presents a comparison between the machining behaviors and the sintered properties of components machined prior to or after sintering. The results show that the radial crush strength measured on rings machined in their green state is equal to that of parts machined after sintering.

  18. Geometry with Coordinates, Student's Text, Part II, Unit 48. Revised Edition.

    ERIC Educational Resources Information Center

    Allen, Frank B.; And Others

    This is part two of a two-part SMSG geometry text for high school students. One of the goals of the text is the development of analytic geometry hand-in-hand with synthetic geometry. The authors emphasize that both are deductive systems and that it is useful to have more than one mode of attack in solving problems. The text begins the development…

  19. Fracture strength and elastic modulus as a function of porosity for hydroxyapatite and other brittle materials, Part II

    SciTech Connect

    Fan, Xiaofeng; Case, Eldon D; Ren, Fei; Shu, Yutian; Baumann, Melissa

    2012-01-01

    Part I of this paper discussed the Weibull modulus m, versus porosity P behavior of brittle materials, including HA. While the Weibull modulus m deals with the scatter in fracture strength data, this paper (Part II) focuses on two additional key mechanical properties of porous materials, namely the average fracture strength f , and Young s modulus E, for P in the interval from P zero to P PG (the porosity of the unfired compacts). The f versus P data for HA from this study and the literature data for alumina, yttria stabilized zirconia (YSZ) and silicon nitride are describedwell by functions of , where = 1 P/PG = the degree of densification. A similar function of applies to the E versus P behavior of HA from this study and data from the literature for alumina, titanium and YSZ. All of the data analyzed in this study (Part II) are based on partially and fully sintered powder compacts (excluding green powder compacts), thus the f / 0 versus and E /E0 versus relationships may apply only to such specimens.

  20. Orthodontic treatment for the TMJ patient following splint therapy to stabilize a displaced disk(s): a systemized approach. Part II.

    PubMed

    Brenkert, Dennis R

    2010-10-01

    Orthodontic treatment for a patient who has had a displaced disk or disks and has been stabilized by anterior repositioning splint therapy presents the dentist with a difficult orthodontic problem. Frequently, there is a posterior open bite present, with the anterior teeth only occluding in the stabilized TMJ position upon removal of the splint. The current articles (Part II of II presented here) will present an organized TMJ/orthodontic diagnosis [Part I, J Craniomandib Pract2010; 28(3):193-199] and orthodontic treatment method (Part II) to properly treat these patients to a consistent stabilized occlusion compatible with the TMJ splint stabilized position.