Detecting past changes of effective population size

PubMed Central

Nikolic, Natacha; Chevalet, Claude

2014-01-01

Understanding and predicting population abundance is a major challenge confronting scientists. Several genetic models have been developed using microsatellite markers to estimate the present and ancestral effective population sizes. However, to get an overview on the evolution of population requires that past fluctuation of population size be traceable. To address the question, we developed a new model estimating the past changes of effective population size from microsatellite by resolving coalescence theory and using approximate likelihoods in a Monte Carlo Markov Chain approach. The efficiency of the model and its sensitivity to gene flow and to assumptions on the mutational process were checked using simulated data and analysis. The model was found especially useful to provide evidence of transient changes of population size in the past. The times at which some past demographic events cannot be detected because they are too ancient and the risk that gene flow may suggest the false detection of a bottleneck are discussed considering the distribution of coalescence times. The method was applied on real data sets from several Atlantic salmon populations. The method called VarEff (Variation of Effective size) was implemented in the R package VarEff and is made available at https://qgsp.jouy.inra.fr and at http://cran.r-project.org/web/packages/VarEff. PMID:25067949

Study of the migration phenomena of specific metals in canned tomato paste before and after opening. Validation of a new quality indicator for opened cans.

PubMed

Raptopoulou, Kalomoira G; Pasias, Ioannis N; Thomaidis, Nikolaos S; Proestos, Charalampos

2014-07-01

A method for the simultaneous determination of Cd-Pb, As-Cu, Cr-Ni and Fe-Mn in canned tomato paste samples by Electrothermal Atomic Absorption Spectrometry was developed and validated. The validation procedure was conducted according to the terms of the European regulation for the official control of contaminants in foods. The validated method was applied for the determination of these metals and metalloids in 13 different tomato paste samples and the results showed that Cd content was higher than the maximum permissible value of 0.050 mg kg(-1) as proposed in European Regulation (EC) No 1881/2006 concerning fresh fruits and vegetables. Furthermore, a new quality indicator was evaluated in order to provide information about tomato paste quality and the appropriate storage time of an opened canned tomato paste. Finally, a migration test was accomplished based on the calculation of mass balance and the comparison of the elemental content in canned tomato paste samples and in aseptic paper pack and it was proved that Fe and Pb were the main metals migrating in tomato paste samples. Copyright © 2014 Elsevier Ltd. All rights reserved.

Quantitative studies of bird movement: a methodological review

USGS Publications Warehouse

Nichols, J.D.; Kaiser, A.

1999-01-01

The past several years have seen development of a number of statistical models and methods for drawing inferences about bird movement using data from marked individuals. It can be difficult to keep up with this rapid development of new methods, so our purpose here is to categorize and review methods for drawing inferences about avian movement. We also outline recommendations about future work dealing both with methods development and actual studies directed at hypotheses about bird movement of interest from conservation, management, or ecological perspectives.

2010 Diffraction Methods in Structural Biology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dr. Ana Gonzalez

2011-03-10

Advances in basic methodologies have played a major role in the dramatic progress in macromolecular crystallography over the past decade, both in terms of overall productivity and in the increasing complexity of the systems being successfully tackled. The 2010 Gordon Research Conference on Diffraction Methods in Structural Biology will, as in the past, focus on the most recent developments in methodology, covering all aspects of the process from crystallization to model building and refinement, complemented by examples of structural highlights and complementary methods. Extensive discussion will be encouraged and it is hoped that all attendees will participate by giving oralmore » or poster presentations, the latter using the excellent poster display area available at Bates College. The relatively small size and informal atmosphere of the meeting provides an excellent opportunity for all participants, especially younger scientists, to meet and exchange ideas with leading methods developers.« less

Method of moments comparison for soot population modeling in turbulent combustion

NASA Astrophysics Data System (ADS)

Chong, Shao Teng; Im, Hong; Raman, Venkat

2017-11-01

Representation of soot population is an important component in the efficient computational prediction of particulate emissions. However, there are a number of moments-based techniques with varying numerical complexity. In the past, development of such methods has been principally carried out on canonical laminar and 0-D flows. However, their applications in realistic solvers developed for turbulent combustion may face challenges from turbulence closure to selection of moment sets. In this work, the accuracy and relative computational expense of a few common soot method of moments are tested in canonical turbulent flames for different configurations. Large eddy simulation (LES) will be used as the turbulence modeling framework. In grid-filtered LES, the interaction of numerical and modeling errors is a first-order problem that can undermine the accuracy of soot predictions. In the past, special moments-based methods for solvers that transport high frequency content fluid with ability to reconstruct particle size distribution have been developed. Here, a similar analysis will be carried out for the moment-based soot modeling approaches above. Specifically, realizability of moments methods with nonlinear advection schemes will be discussed.

Performance of human fecal anaerobe-associated PCR-based assays in a multi-laboratory method evaluation study

EPA Science Inventory

A number of PCR-based methods for detecting human fecal material in environmental waters have been developed over the past decade, but these methods have rarely received independent comparative testing. Here, we evaluated ten of these methods (BacH, BacHum-UCD, B. thetaiotaomic...

Comparison of Past, Present, and Future Volume Estimation Methods for Tennessee

Treesearch

Stanley J. Zarnoch; Alexander Clark; Ray A. Souter

2003-01-01

Forest Inventory and Analysis 1999 survey data for Tennessee were used to compare stem-volume estimates obtained using a previous method, the current method, and newly developed taper models that will be used in the future. Compared to the current method, individual tree volumes were consistently underestimated with the previous method, especially for the hardwoods....

Comparison of sprinkler droplet size and velocity measurements using a laser precipitation meter and photographic method

USDA-ARS?s Scientific Manuscript database

Kinetic energy of water droplets has a substantial effect on development of a soil surface seal and infiltration rate of bare soil. Methods for measuring sprinkler droplet size and velocity needed to calculate droplet kinetic energy have been developed and tested over the past 50 years, each with ad...

How to select basis sets and computational methods for carbohydrate modeling

USDA-ARS?s Scientific Manuscript database

In the last decade there have been significant improvements in computer hardware but also in development of quantum mechanical methods. This makes it more feasible to study large carbohydrate molecules via quantum mechanical methods whereas in the past studies of carbohydrates were restricted to em...

Wildfire Detection using by Multi Dimensional Histogram in Boreal Forest

NASA Astrophysics Data System (ADS)

Honda, K.; Kimura, K.; Honma, T.

2008-12-01

Early detection of wildfires is an issue for reduction of damage to environment and human. There are some attempts to detect wildfires by using satellite imagery, which are mainly classified into three methods: Dozier Method(1981-), Threshold Method(1986-) and Contextual Method(1994-). However, the accuracy of these methods is not enough: some commission and omission errors are included in the detected results. In addition, it is not so easy to analyze satellite imagery with high accuracy because of insufficient ground truth data. Kudoh and Hosoi (2003) developed the detection method by using three-dimensional (3D) histogram from past fire data with the NOAA-AVHRR imagery. But their method is impractical because their method depends on their handworks to pick up past fire data from huge data. Therefore, the purpose of this study is to collect fire points as hot spots efficiently from satellite imagery and to improve the method to detect wildfires with the collected data. As our method, we collect past fire data with the Alaska Fire History data obtained by the Alaska Fire Service (AFS). We select points that are expected to be wildfires, and pick up the points inside the fire area of the AFS data. Next, we make 3D histogram with the past fire data. In this study, we use Bands 1, 21 and 32 of MODIS. We calculate the likelihood to detect wildfires with the three-dimensional histogram. As our result, we select wildfires with the 3D histogram effectively. We can detect the troidally spreading wildfire. This result shows the evidence of good wildfire detection. However, the area surrounding glacier tends to rise brightness temperature. It is a false alarm. Burnt area and bare ground are sometimes indicated as false alarms, so that it is necessary to improve this method. Additionally, we are trying various combinations of MODIS bands as the better method to detect wildfire effectively. So as to adjust our method in another area, we are applying our method to tropical forest in Kalimantan, Indonesia and around Chiang Mai, Thailand. But the ground truth data in these areas is lesser than the one in Alaska. Our method needs lots of accurate observed data to make multi-dimensional histogram in the same area. In this study, we can show the system to select wildfire data efficiently from satellite imagery. Furthermore, the development of multi-dimensional histogram from past fire data makes it possible to detect wildfires accurately.

Quantitative studies of bird movement: A methodological review

USGS Publications Warehouse

Nichols, J.D.; Kaiser, A.

1999-01-01

The past several years have seen the development of a number of statistical models and methods for drawing inferences about bird movement using data from marked individuals. It can be difficult to keep up with this rapid development of new methods, so our purpose here is to categorize and review methods for drawing inferences about avian movement. We also outline recommendations about future work, dealing both with methodological developments and with studies directed at hypotheses about bird movement of interest from conservation, management, or ecological perspectives.

LES of a ducted propeller with rotor and stator in crashback

NASA Astrophysics Data System (ADS)

Jang, Hyunchul; Mahesh, Krishnan

2012-11-01

A sliding interface method is developed for large eddy simulation (LES) of flow past ducted propellers with both rotor and stator. The method is developed for arbitrarily shaped unstructured elements on massively parallel computing platforms. Novel algorithms for searching sliding elements, interpolation at the sliding interface, and data structures for message passing are developed. We perform LES of flow past a ducted propeller with stator blades in the crashback mode of operation, where a marine vessel is quickly decelerated by rotating the propeller in reverse. The unsteady loads predicted by LES are in good agreement with experiments. A highly unsteady vortex ring is observed outside the duct. High pressure fluctuations are observed near the blade tips, which significantly contribute to the side-force. This work is supported by the United States Office of Naval Research.

New Electrochemically-Modified Carbon Paste Inclusion β-Cyclodextrin and Carbon Nanotubes Sensors for Quantification of Dorzolamide Hydrochloride.

PubMed

Alarfaj, Nawal Ahmad; El-Tohamy, Maha Farouk

2016-12-02

The present article introduces a new approach to fabricate carbon paste sensors, including carbon paste, modified carbon paste inclusion β-cyclodextrin, and carbon nanotubes for the quantification of dorzolamide hydrochloride (DRZ). This study is mainly based on the construction of three different carbon paste sensors by the incorporation of DRZ with phosphotungstic acid (PTA) to form dorzolamide-phosphotungstate (DRZ-PT) as an electroactive material in the presence of the solvent mediator ortho-nitrophenyloctyl ether ( o -NPOE). The fabricated conventional carbon paste sensor (sensor I), as well as the other modified carbon paste sensors using β-cyclodextrin (sensor II) and carbon nanotubes (sensor III), have been investigated. The sensors displayed Nernstian responses of 55.4 ± 0.6, 56.4 ± 0.4 and 58.1 ± 0.2 mV·decade -1 over concentration ranges of 1.0 × 10 -5 -1.0 × 10 -2 , 1.0 × 10 -6 -1.0 × 10 -2 , and 5.0 × 10 -8 -1.0 × 10 -2 mol·L -1 with lower detection limits of 5.0 × 10 -6 , 5.0 × 10 -7 , and 2.5 × 10 -9 mol·L -1 for sensors I, II, and III, respectively. The critical performance of the developed sensors was checked with respect to the effect of various parameters, including pH, selectivity, response time, linear concentration relationship, lifespan, etc. Method validation was applied according to the international conference on harmonisation of technical requirements for registration of pharmaceuticals for human use ICH guidelines. The developed sensors were employed for the determination of DRZ in its bulk and dosage forms, as well as bio-samples. The observed data were statistically analyzed and compared with those obtained from other published methods.

Development of a computational model for predicting solar wind flows past nonmagnetic terrestrial planets

NASA Technical Reports Server (NTRS)

Stahara, S. S.; Spreiter, J. R.

1983-01-01

A computational model for the determination of the detailed plasma and magnetic field properties of the global interaction of the solar wind with nonmagnetic terrestrial planetary obstacles is described. The theoretical method is based on an established single fluid, steady, dissipationless, magnetohydrodynamic continuum model, and is appropriate for the calculation of supersonic, super-Alfvenic solar wind flow past terrestrial ionospheres.

Supercomputer modeling of flow past hypersonic flight vehicles

NASA Astrophysics Data System (ADS)

Ermakov, M. K.; Kryukov, I. A.

2017-02-01

A software platform for MPI-based parallel solution of the Navier-Stokes (Euler) equations for viscous heat-conductive compressible perfect gas on 3-D unstructured meshes is developed. The discretization and solution of the Navier-Stokes equations are constructed on generalized S.K. Godunov’s method and the second order approximation in space and time. Developed software platform allows to carry out effectively flow past hypersonic flight vehicles simulations for the Mach numbers 6 and higher, and numerical meshes with up to 1 billion numerical cells and with up to 128 processors.

Use of colliery spoil for infilling mine workings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ghataora, G.S.; Jarvis, S.T.

1996-12-31

Colliery spoil has been used as a major constituent of rock paste, a controlled low-strength bulk infill material, to infill abandoned limestone mines in the West Midlands of England since the early 1980s. During this time the design of colliery spoil rock paste has been modified and improved to ensure that strengths are achieved and consolidation is minimized. This paper describes the methods used for measuring and monitoring the development of the strength of rock paste used to infill the Littleton Street Mine in Walsall, England. The mine had a volume of about 500,000 m{sup 3} and is possibly themore » largest underground void to be infilled with rock paste.« less

[Progress in stable isotope labeled quantitative proteomics methods].

PubMed

Zhou, Yuan; Shan, Yichu; Zhang, Lihua; Zhang, Yukui

2013-06-01

Quantitative proteomics is an important research field in post-genomics era. There are two strategies for proteome quantification: label-free methods and stable isotope labeling methods which have become the most important strategy for quantitative proteomics at present. In the past few years, a number of quantitative methods have been developed, which support the fast development in biology research. In this work, we discuss the progress in the stable isotope labeling methods for quantitative proteomics including relative and absolute quantitative proteomics, and then give our opinions on the outlook of proteome quantification methods.

Velocity distribution of electrons in time-varying low-temperature plasmas: progress in theoretical procedures over the past 70 years

NASA Astrophysics Data System (ADS)

Makabe, Toshiaki

2018-03-01

A time-varying low-temperature plasma sustained by electrical powers with various kinds of fRequencies has played a key role in the historical development of new technologies, such as gas lasers, ozonizers, micro display panels, dry processing of materials, medical care, and so on, since World War II. Electrons in a time-modulated low-temperature plasma have a proper velocity spectrum, i.e. velocity distribution dependent on the microscopic quantum characteristics of the feed gas molecule and on the external field strength and the frequency. In order to solve and evaluate the time-varying velocity distribution, we have mostly two types of theoretical methods based on the classical and linear Boltzmann equations, namely, the expansion method using the orthogonal function and the procedure of non-expansional temporal evolution. Both methods have been developed discontinuously and progressively in synchronization with those technological developments. In this review, we will explore the historical development of the theoretical procedure to evaluate the electron velocity distribution in a time-varying low-temperature plasma over the past 70 years.

PE Metrics: Background, Testing Theory, and Methods

ERIC Educational Resources Information Center

Zhu, Weimo; Rink, Judy; Placek, Judith H.; Graber, Kim C.; Fox, Connie; Fisette, Jennifer L.; Dyson, Ben; Park, Youngsik; Avery, Marybell; Franck, Marian; Raynes, De

2011-01-01

New testing theories, concepts, and psychometric methods (e.g., item response theory, test equating, and item bank) developed during the past several decades have many advantages over previous theories and methods. In spite of their introduction to the field, they have not been fully accepted by physical educators. Further, the manner in which…

Hybrid finite volume-finite element model for the numerical analysis of furrow irrigation and fertigation

USDA-ARS?s Scientific Manuscript database

Although slowly abandoned in developed countries, furrow irrigation systems continue to be a dominant irrigation method in developing countries. Numerical models represent powerful tools to assess irrigation and fertigation efficiency. While several models have been proposed in the past, the develop...

Reconstruction of past equilibrium line altitude using ice extent data

NASA Astrophysics Data System (ADS)

Visnjevic, Vjeran; Herman, Frederic; Podladchikov, Yuri

2017-04-01

With the end of the Last Glacial Maximum (LGM), about 20 000 years ago, ended the most recent long-lasting cold phase in Earth's history. This last glacial advance left a strong observable imprint on the landscape, such as abandoned moraines, trimlines and other glacial geomorphic features. These features provide a valuable record of past continental climate. In particular, terminal moraines reflect the extent of glaciers and ice-caps, which itself reflects past temperature and precipitation conditions. Here we present an inverse approach, based on a Tikhonov regularization, we have recently developed to reconstruct the LGM mass balance from observed ice extent data. The ice flow model is developed using the shallow ice approximation and solved explicitly using Graphical Processing Units (GPU). The mass balance field, b, is the constrained variable defined by the ice surface S, balance rate β and the spatially variable equilibrium line altitude field (ELA): b = min (β ṡ(S(x,y)- ELA (x,y)),c). (1) where c is a maximum accumulation rate. We show that such a mass balance, and thus the spatially variable ELA field, can be inferred from the observed past ice extent and ice thickness at high resolution and very efficiently. The GPU implementation allows us solve one 1024x1024 grid points forward model run under 0.5s, which significantly reduces the time needed for our inverse method to converge. We start with synthetic test to demonstrate the method. We then apply the method to LGM ice extents of South Island of New Zealand, the Patagonian Andes, where we can see a clear influence of Westerlies on the ELA, and the European Alps. These examples show that the method is capable of constraining spatial variations in mass balance at the scale of a mountain range, and provide us with information on past continental climate.

Factors Affecting Accuracy of Past Tense Production in Children with Specific Language Impairment and Their Typically Developing Peers: The Influence of Verb Transitivity, Clause Location, and Sentence Type

ERIC Educational Resources Information Center

Owen, Amanda J.

2010-01-01

Purpose: The author examined the influence of sentence type, clause order, and verb transitivity on the accuracy of children's past tense productions. All groups of children, but especially children with specific language impairment (SLI), were predicted to decrease accuracy as linguistic complexity increased. Method: The author elicited past…

Molecular sieving using nanofilters: past, present and future.

PubMed

Han, Jongyoon; Fu, Jianping; Schoch, Reto B

2008-01-01

Filtration of molecules by nanometer-sized structures is ubiquitous in our everyday life, but our understanding of such molecular filtration processes is far less than desired. Until recently, one of the main reasons was the lack of experimental methods that can help provide detailed, microscopic pictures of molecule-nanostructure interactions. Several innovations in experimental methods, such as nuclear track-etched membranes developed in the 70s, and more recent development of nanofluidic molecular filters, played pivotal roles in advancing our understanding. With the ability to make truly molecular-scale filters and pores with well-defined sizes, shapes, and surface properties, now we are well positioned to engineer better functionality in molecular sieving, separation and other membrane applications. Reviewing past theoretical developments (often scattered across different fields) and connecting them to the most recent advances in the field would be essential to get a full, unified view on this important engineering question.

Toward a Social Psychophysics of Face Communication.

PubMed

Jack, Rachael E; Schyns, Philippe G

2017-01-03

As a highly social species, humans are equipped with a powerful tool for social communication-the face. Although seemingly simple, the human face can elicit multiple social perceptions due to the rich variations of its movements, morphology, and complexion. Consequently, identifying precisely what face information elicits different social perceptions is a complex empirical challenge that has largely remained beyond the reach of traditional methods. In the past decade, the emerging field of social psychophysics has developed new methods to address this challenge, with the potential to transfer psychophysical laws of social perception to the digital economy via avatars and social robots. At this exciting juncture, it is timely to review these new methodological developments. In this article, we introduce and review the foundational methodological developments of social psychophysics, present work done in the past decade that has advanced understanding of the face as a tool for social communication, and discuss the major challenges that lie ahead.

Handbook of Research Methods in Social and Personality Psychology

NASA Astrophysics Data System (ADS)

Reis, Harry T.; Judd, Charles M.

2000-03-01

This volume provides an overview of research methods in contemporary social psychology. Coverage includes conceptual issues in research design, methods of research, and statistical approaches. Because the range of research methods available for social psychology have expanded extensively in the past decade, both traditional and innovative methods are presented. The goal is to introduce new and established researchers alike to new methodological developments in the field.

Highly reliable field electron emitters produced from reproducible damage-free carbon nanotube composite pastes with optimal inorganic fillers.

PubMed

Kim, Jae-Woo; Jeong, Jin-Woo; Kang, Jun-Tae; Choi, Sungyoul; Ahn, Seungjoon; Song, Yoon-Ho

2014-02-14

Highly reliable field electron emitters were developed using a formulation for reproducible damage-free carbon nanotube (CNT) composite pastes with optimal inorganic fillers and a ball-milling method. We carefully controlled the ball-milling sequence and time to avoid any damage to the CNTs, which incorporated fillers that were fully dispersed as paste constituents. The field electron emitters fabricated by printing the CNT pastes were found to exhibit almost perfect adhesion of the CNT emitters to the cathode, along with good uniformity and reproducibility. A high field enhancement factor of around 10,000 was achieved from the CNT field emitters developed. By selecting nano-sized metal alloys and oxides and using the same formulation sequence, we also developed reliable field emitters that could survive high-temperature post processing. These field emitters had high durability to post vacuum annealing at 950 °C, guaranteeing survival of the brazing process used in the sealing of field emission x-ray tubes. We evaluated the field emitters in a triode configuration in the harsh environment of a tiny vacuum-sealed vessel and observed very reliable operation for 30 h at a high current density of 350 mA cm(-2). The CNT pastes and related field emitters that were developed could be usefully applied in reliable field emission devices.

Highly reliable field electron emitters produced from reproducible damage-free carbon nanotube composite pastes with optimal inorganic fillers

NASA Astrophysics Data System (ADS)

Kim, Jae-Woo; Jeong, Jin-Woo; Kang, Jun-Tae; Choi, Sungyoul; Ahn, Seungjoon; Song, Yoon-Ho

2014-02-01

Highly reliable field electron emitters were developed using a formulation for reproducible damage-free carbon nanotube (CNT) composite pastes with optimal inorganic fillers and a ball-milling method. We carefully controlled the ball-milling sequence and time to avoid any damage to the CNTs, which incorporated fillers that were fully dispersed as paste constituents. The field electron emitters fabricated by printing the CNT pastes were found to exhibit almost perfect adhesion of the CNT emitters to the cathode, along with good uniformity and reproducibility. A high field enhancement factor of around 10 000 was achieved from the CNT field emitters developed. By selecting nano-sized metal alloys and oxides and using the same formulation sequence, we also developed reliable field emitters that could survive high-temperature post processing. These field emitters had high durability to post vacuum annealing at 950 °C, guaranteeing survival of the brazing process used in the sealing of field emission x-ray tubes. We evaluated the field emitters in a triode configuration in the harsh environment of a tiny vacuum-sealed vessel and observed very reliable operation for 30 h at a high current density of 350 mA cm-2. The CNT pastes and related field emitters that were developed could be usefully applied in reliable field emission devices.

Production, characterization, and mechanical behavior of cementitious materials incorporating carbon nanofibers

NASA Astrophysics Data System (ADS)

Yazdanbakhsh, Ardavan

Carbon nanotubes (CNTs) and carbon nanofirbers (CNFs) have excellent properties (mechanical, electrical, magnetic, etc.), which can make them effective nanoreinforcements for improving the properties of materials. The incorporation of CNT/Fs in a wide variety of materials has been researched extensively in the past decade. However, the past study on the reinforcement of cementitious materials with these nanofilaments has been limited. The findings from those studies indicate that CNT/Fs did not significantly improve the mechanical properties of cementitious materials. Two major parameters influence the effectiveness of any discrete inclusion in composite material: The dispersion quality of the inclusions and the interfacial bond between the inclusions and matrix. The main focus of this dissertation is on the dispersion factor, and consists of three main tasks: First a novel thermodynamic-based method for dispersion quantification was developed. Second, a new method, incorporating the utilization of silica fume, was devised to improve and stabilize the dispersion of CNFs in cement paste. And third, the dispersion quantification method and mechanical testing were employed to measure, compare, and correlate the dispersion and mechanical properties of CNF-incorporated cement paste produced with the conventional and new methods. Finally, the main benefits, including the increase in strength and resistance to shrinkage cracking, obtained from the utilization of CNFs in cement paste will be presented. The investigations and the corresponding results show that the novel dispersion quantification method can be implemented easily to perform a wide variety of tasks ranging from measuring dispersion of nanofilaments in composites using their optical/SEM micrographs as input, to measuring the effect of cement particle/clump size on the dispersion of nano inclusions in cement paste. It was found that cement particles do not affect the dispersion of nano inclusions in cement paste significantly while the dispersion of nano inclusions can notably degenerates if the cement particles are agglomerated. The novel dispersion quantification method shows that, the dispersion of CNFs in cement paste significantly improves by utilizing silica fume. However, it was found that the dispersion of silica fume particles is an important parameter and poorly dispersed silica fume cannot enhance the overall dispersion of nano inclusions in cementitious materials. Finally, the mechanical testing and experimentations showed that CNFs, in absence of moist curing, even if poorly dispersed, can provide important benefits in terms of strength and crack resistance.

Non-intrusive methods of characterizing vehicles on the highway.

DOT National Transportation Integrated Search

2003-06-01

Over the past year we have worked on the development of a real-time laser-based non-intrusive field-deployable detection system for delineation of moving vehicles. The primary goal of the project is to develop a roadway detection system that can be u...

Past Accomplishments and Future Challenges

ERIC Educational Resources Information Center

Danielson, Louis; Doolittle, Jennifer; Bradley, Renee

2005-01-01

Three broad issues continue to dramatically impact the education of children with specific learning disabilities (SLD): (1) the development and implementation of scientifically defensible methods of identification; (2) the development and implementation of scientific interventions to ensure that children with SLD have access to and make progress…

Methods of albumin estimation in clinical biochemistry: Past, present, and future.

PubMed

Kumar, Deepak; Banerjee, Dibyajyoti

2017-06-01

Estimation of serum and urinary albumin is routinely performed in clinical biochemistry laboratories. In the past, precipitation-based methods were popular for estimation of human serum albumin (HSA). Currently, dye-binding or immunochemical methods are widely practiced. Each of these methods has its limitations. Research endeavors to overcome such limitations are on-going. The current trends in methodological aspects of albumin estimation guiding the field have not been reviewed. Therefore, it is the need of the hour to review several aspects of albumin estimation. The present review focuses on the modern trends of research from a conceptual point of view and gives an overview of recent developments to offer the readers a comprehensive understanding of the subject. Copyright © 2017 Elsevier B.V. All rights reserved.

A Machine Learning System for Analyzing Human Tactics in a Game

NASA Astrophysics Data System (ADS)

Ito, Hirotaka; Tanaka, Toshimitsu; Sugie, Noboru

In order to realize advanced man-machine interfaces, it is desired to develop a system that can infer the mental state of human users and then return appropriate responses. As the first step toward the above goal, we developed a system capable of inferring human tactics in a simple game played between the system and a human. We present a machine learning system that plays a color expectation game. The system infers the tactics of the opponent, and then decides the action based on the result. We employed a modified version of classifier system like XCS in order to design the system. In addition, three methods are proposed in order to accelerate the learning rate. They are a masking method, an iterative method, and tactics templates. The results of computer experiments confirmed that the proposed methods effectively accelerate the machine learning. The masking method and the iterative method are effective to a simple strategy that considers only a part of past information. However, study speed of these methods is not enough for the tactics that refers to a lot of past information. For the case, the tactics template was able to settle the study rapidly when the tactics is identified.

The past and future of modeling forest dynamics: from growth and yield curves to forest landscape models

Treesearch

Stephen R. Shifley; Hong S. He; Heike Lischke; Wen J. Wang; Wenchi Jin; Eric J. Gustafson; Jonathan R. Thompson; Frank R. Thompson; William D. Dijak; Jian Yang

2017-01-01

Context. Quantitative models of forest dynamics have followed a progression toward methods with increased detail, complexity, and spatial extent. Objectives. We highlight milestones in the development of forest dynamics models and identify future research and application opportunities. Methods. We reviewed...

ORD research and results using biological end points to detect exposures to contaminants of emerging concern

EPA Science Inventory

For the past nine years the Ecological Exposure Research Division (EERD) has been developing methods for the assessment of EDCs and other contaminants of emerging concern (CECs). These methods include genomic techniques for detecting the presence and potential exposure to human p...

Adapting to climate change

Treesearch

Constance I. Millar; Christopher W. Swanston; David L. Peterson

2014-01-01

Federal agencies have led the development of adaptation principles and tools in forest ecosystems over the past decade. Successful adaptation efforts generally require organizations to: (1) develop science-management partnerships, (2) provide education on climate change science, (3) provide a toolkit of methods and processes for vulnerability assessment and adaptation...

Research Questions to Identify Ecological Indicators Most Useful for Linking Ecosystems and Human Wellbeing

EPA Science Inventory

Background/Question/Methods While the desirability of ecological indicators that foster social science interpretation and use as well as public comprehension is well established, guidelines for developing indicators that meet these needs are not as well developed. In the past f...

A review on detection methods used for foodborne pathogens

PubMed Central

Priyanka, B.; Patil, Rajashekhar K.; Dwarakanath, Sulatha

2016-01-01

Foodborne pathogens have been a cause of a large number of diseases worldwide and more so in developing countries. This has a major economic impact. It is important to contain them, and to do so, early detection is very crucial. Detection and diagnostics relied on culture-based methods to begin with and have developed in the recent past parallel to the developments towards immunological methods such as enzyme-linked immunosorbent assays (ELISA) and molecular biology-based methods such as polymerase chain reaction (PCR). The aim has always been to find a rapid, sensitive, specific and cost-effective method. Ranging from culturing of microbes to the futuristic biosensor technology, the methods have had this common goal. This review summarizes the recent trends and brings together methods that have been developed over the years. PMID:28139531

Large space antenna communications systems: Integrated Langley Research Center/Jet Propulsion Laboratory technology development activities. 1: Introduction

NASA Technical Reports Server (NTRS)

Campbell, T. G.

1983-01-01

The Jet Propulsion Laboratory and the Langley Research Center have been developing technology related to large space antennas (LSA) during the past several years. The need for a communication system research program became apparent during the recent studies for the Land Mobile Satellite System. This study indicated the need for additional research in (1) electromagnetic analysis methods, (2) design and development of multiple beam feed systems, and (3) the measurement methods for LSA reflectors.

New Electrochemically-Modified Carbon Paste Inclusion β-Cyclodextrin and Carbon Nanotubes Sensors for Quantification of Dorzolamide Hydrochloride

PubMed Central

Alarfaj, Nawal Ahmad; El-Tohamy, Maha Farouk

2016-01-01

The present article introduces a new approach to fabricate carbon paste sensors, including carbon paste, modified carbon paste inclusion β-cyclodextrin, and carbon nanotubes for the quantification of dorzolamide hydrochloride (DRZ). This study is mainly based on the construction of three different carbon paste sensors by the incorporation of DRZ with phosphotungstic acid (PTA) to form dorzolamide-phosphotungstate (DRZ-PT) as an electroactive material in the presence of the solvent mediator ortho-nitrophenyloctyl ether (o-NPOE). The fabricated conventional carbon paste sensor (sensor I), as well as the other modified carbon paste sensors using β-cyclodextrin (sensor II) and carbon nanotubes (sensor III), have been investigated. The sensors displayed Nernstian responses of 55.4 ± 0.6, 56.4 ± 0.4 and 58.1 ± 0.2 mV·decade−1 over concentration ranges of 1.0 × 10−5–1.0 × 10−2, 1.0 × 10−6–1.0 × 10−2, and 5.0 × 10−8–1.0 × 10−2 mol·L−1 with lower detection limits of 5.0 × 10−6, 5.0 × 10−7, and 2.5 × 10−9 mol·L−1 for sensors I, II, and III, respectively. The critical performance of the developed sensors was checked with respect to the effect of various parameters, including pH, selectivity, response time, linear concentration relationship, lifespan, etc. Method validation was applied according to the international conference on harmonisation of technical requirements for registration of pharmaceuticals for human use ICH guidelines. The developed sensors were employed for the determination of DRZ in its bulk and dosage forms, as well as bio-samples. The observed data were statistically analyzed and compared with those obtained from other published methods. PMID:27918458

Bridge scour monitoring technologies : development of evaluation and selection protocols for application on river bridges in Minnesota.

DOT National Transportation Integrated Search

2010-03-01

Bridge failure or loss of structural integrity can result from scour of riverbed sediment near bridge abutments or : piers during high-flow events in rivers. In the past 20 years, several methods of monitoring bridge scour have been : developed spann...

Methods for transcriptomic analyses of the porcine host immune response: application to Salmonella infection using microarrays

USDA-ARS?s Scientific Manuscript database

Technological developments in both the collection and analysis of molecular genetic data over the past few years have provided new opportunities for an improved understanding of the global response to pathogen exposure. Such developments are particularly dramatic for scientists studying the pig, whe...

Development of laboratory test methods to replace the simulated high-temperature grout fluidity test.

DOT National Transportation Integrated Search

2014-06-01

This report contains a summary of the research performed to develop a replacement for the high-temperature grout : fluidity (HTGF) test. The HTGF test was employed in the past by FDOT to qualify post-tensioning (PT) grouts for use in : post-tensioned...

Pedagogical Documentation and Its Relation to Everyday Activities in Early Years

ERIC Educational Resources Information Center

Rintakorpi, Kati; Reunamo, Jyrki

2017-01-01

Documentation in early childhood education and care (ECEC) institutions has been developed for decades in various contexts. Today, documentation is preferred as an inclusive method of evaluating, planning, and developing ECEC in the curricula of many countries. Qualitative research on documentation has increased in past years, but quantitative…

Trends in financing and availability of capital

Treesearch

Donald G. Schink

1980-01-01

The past, present and future of recreation enterprise financing is developed in this paper. Developers need to utilize all available methods of financing sound projects. The long-term solution to the problems depend on better information, improved educational programs, and a loan program tailored to the needs of this industry.

Multimedia Enhanced Course Management System: Web Based Interactive Application Development for Universities

ERIC Educational Resources Information Center

Emiroglu, Bulent Gursel

2007-01-01

Of the fields on which developments related to information and communication technologies are effective will keep increasing is education. That's why the methods and techniques that have been formed over the long years may change relatively. In the past years, the field of higher education has been impacted very much from the developments and…

Method Engineering: A Service-Oriented Approach

NASA Astrophysics Data System (ADS)

Cauvet, Corine

In the past, a large variety of methods have been published ranging from very generic frameworks to methods for specific information systems. Method Engineering has emerged as a research discipline for designing, constructing and adapting methods for Information Systems development. Several approaches have been proposed as paradigms in method engineering. The meta modeling approach provides means for building methods by instantiation, the component-based approach aims at supporting the development of methods by using modularization constructs such as method fragments, method chunks and method components. This chapter presents an approach (SO2M) for method engineering based on the service paradigm. We consider services as autonomous computational entities that are self-describing, self-configuring and self-adapting. They can be described, published, discovered and dynamically composed for processing a consumer's demand (a developer's requirement). The method service concept is proposed to capture a development process fragment for achieving a goal. Goal orientation in service specification and the principle of service dynamic composition support method construction and method adaptation to different development contexts.

Nurturing Positive Mental Health: Mindfulness for Wellbeing in Counseling

ERIC Educational Resources Information Center

Rybak, Christopher

2013-01-01

As increasing attention has been given in the past decade to positive psychology, this has likewise been directed toward understanding methods of nurturing positive mental health. These methods have moved toward empowering clients in the development of skills to enhance their own sense of wellbeing (Khong, Counseling and Spirituality, 25, 67-84,…

Integrating Poetry and "To Kill a Mockingbird."

ERIC Educational Resources Information Center

Jolley, Susan Arpajian

2002-01-01

Outlines a method of teaching "To Kill a Mockingbird" along with the study of poetry. Notes that this method allows students to consider the themes of courage and developing compassion. Concludes that teaching such a multigenre unit allows students to look for connections among fact and fiction, the past and present, their own lives and…

Sediment Toxicity Testing

EPA Science Inventory

Sediment toxicity testing has become a fundamental component of regulatory frameworks for assessing the risks posed by contaminated sediments and for development of chemical sediment quality guidelines. Over the past two decades, sediment toxicity testing methods have advanced co...

Analyzing the flavor compounds in Chinese traditional fermented shrimp pastes by HS-SPME-GC/MS and electronic nose

NASA Astrophysics Data System (ADS)

Fan, Yan; Yin, Li'ang; Xue, Yong; Li, Zhaojie; Hou, Hu; Xue, Changhu

2017-04-01

Shrimp paste is a type of condiments with high nutritional value. However, the flavors of shrimp paste, particularly the non-uniformity flavors, have limited its application in food processing. In order to identify the characteristic flavor compounds in Chinese traditional shrimp pastes, five kinds of typical commercial products were evaluated in this study. The differences in the volatile composition of the five products were investigated. Solid phase micro-extraction method was employed to extract the volatile compounds. GC-MS and electronic nose were applied to identify the compounds, and the data were analyzed using principal component analysis (PCA). A total of 62 volatile compounds were identified, including 8 alcohols, 7 aldehydes, 3 ketones, 7 ethers, 7 acids, 3 esters, 6 hydrocarbons, 12 pyrazines, 2 phenols, and 7 other compounds. The typical volatile compounds contributing to the flavor of shrimp paste were found as follows: dimethyl disulfide, dimethyl tetrasulfide, dimethyl trisulfide, 2, 3, 5-trimethyl-6-ethyl pyrazine, ethyl-2, 5-dimethyl-pyrazine, phenol and indole. Propanoic acid, butanoic acid, furans, and 2-hydroxy-3-pentanone caused unpleasant odors, such as pungent and rancid odors. Principal component analysis showed that the content of volatile compounds varied depending on the processing conditions and shrimp species. These results indicated that the combinations of multiple analysis and identification methods could make up the limitations of a single method, enhance the accuracy of identification, and provide useful information for sensory research and product development.

25 Years of Self-organized Criticality: Numerical Detection Methods

NASA Astrophysics Data System (ADS)

McAteer, R. T. James; Aschwanden, Markus J.; Dimitropoulou, Michaila; Georgoulis, Manolis K.; Pruessner, Gunnar; Morales, Laura; Ireland, Jack; Abramenko, Valentyna

2016-01-01

The detection and characterization of self-organized criticality (SOC), in both real and simulated data, has undergone many significant revisions over the past 25 years. The explosive advances in the many numerical methods available for detecting, discriminating, and ultimately testing, SOC have played a critical role in developing our understanding of how systems experience and exhibit SOC. In this article, methods of detecting SOC are reviewed; from correlations to complexity to critical quantities. A description of the basic autocorrelation method leads into a detailed analysis of application-oriented methods developed in the last 25 years. In the second half of this manuscript space-based, time-based and spatial-temporal methods are reviewed and the prevalence of power laws in nature is described, with an emphasis on event detection and characterization. The search for numerical methods to clearly and unambiguously detect SOC in data often leads us outside the comfort zone of our own disciplines—the answers to these questions are often obtained by studying the advances made in other fields of study. In addition, numerical detection methods often provide the optimum link between simulations and experiments in scientific research. We seek to explore this boundary where the rubber meets the road, to review this expanding field of research of numerical detection of SOC systems over the past 25 years, and to iterate forwards so as to provide some foresight and guidance into developing breakthroughs in this subject over the next quarter of a century.

An Analysis of the Development of Auricular Acupuncture in China in the Past 10 Years.

PubMed

Zhao, Baixiao; Meng, Xiaonan; Sun, Jie

2018-06-01

Objective: The aim of this research was to analyze recent developments of auricular acupuncture in China during the past 10 years, from 2007 to 2016. Methods: The articles evaluated related to auricular acupuncture studies published in the last 10 years, from 2007 to 2016. The articles were retrieved from the China National Knowledge Infrastructure (CNKI) full-text journal database and from Tsinghua Tongfang, the Chinese Knowledge net. The history of auricular acupuncture, the overall status of the research, and the current use of standardization were analyzed and summarized. Results: The literature research of auricular acupuncture in China revealed that there was a high frequency of publications over the last 10 years. Conclusions: Development of more auricular acupuncture research teams, improvement of the level and quality of the research, and basic and clinical research investigations on auricular acupuncture in China have demonstrated continuous improvement in the past 10 years. It is hoped that this research will continue into the future, offering greater contributions to the development of auricular acupuncture for the health care of human beings.

Function-Task-Competency Approach to Curriculum Development in Vocational Education in Agriculture: Research Report No. 1. Project Background, Plan, and Model Development.

ERIC Educational Resources Information Center

Matteson, Harold R.

The report explains the construction of the function-task-competency method of developing vocational education curricula in agriculture at the secondary and postsecondary levels. It discusses at some length five approaches to the development of vocational education curricula used in the past: the subject approach (which centers on subjects taught…

Preparation Methods: past and Potential Methods of Food Preparation for Space

NASA Technical Reports Server (NTRS)

Huber, C. S.

1985-01-01

The logical progression of development of space food systems during the Mercury, Gemini, Apollo, Skylab and Shuttle programs is outlined. The preparation methods which include no preparation to heating, cooling and freezing are reviewed. The introduction of some new and exciting technological advances is proposed, which should result in a system providing crew members with appetizing, safe, nutritious and convenient food.

The effect of calcium hydroxide on the steroid component of Ledermix and Odontopaste.

PubMed

Athanassiadis, M; Jacobsen, N; Parashos, P

2011-12-01

To investigate the chemical interaction of calcium hydroxide with the corticosteroid triamcinolone acetonide in Ledermix Paste and in Odontopaste, a new steroid/antibiotic paste. Validated methods were developed to analyse the interaction of calcium hydroxide in two forms, Pulpdent Paste and calcium hydroxide powder, with triamcinolone acetonide within Odontopaste and Ledermix Paste. High-performance liquid chromatography (HPLC) was used to analyse the mixed samples of the pastes and calcium hydroxide. The concentration of triamcinolone acetonide within the pastes was determined over 0, 2, 6, 24 and 72-h time-points. All tests with the HPLC involved the testing of the standard with triplicate injections alongside the samples. All samples were tested in duplicate with each injected twice; therefore, four tests were performed for each investigation. Linearity, precision and specificity of the testing procedures and apparatus were validated. Descriptive statistics are provided. In both pastes, there was a marked rapid destruction of the triamcinolone acetonide steroid upon mixing with calcium hydroxide. Odontopaste suffered a lower rate of destruction of the triamcinolone acetonide component than Ledermix Paste, but both pastes showed very similar degrees of steroid destruction after 72 h. When using calcium hydroxide powder with Ledermix Paste, the triamcinolone was destroyed entirely and immediately. The addition of calcium hydroxide to Odontopaste or Ledermix Paste results in the rapid destruction of the steroid. © 2011 International Endodontic Journal.

Half-century research developments in maritime accidents: Future directions.

PubMed

Luo, Meifeng; Shin, Sung-Ho

2016-04-19

Over the past 50 years, research in maritime accidents has undergone a series of fundamental changes. Understanding the evolution of these changes can help maritime communities to know what has been done in the past, how maritime safety can be improved in the future, and how to reduce or eliminate the risks to ships, the lives aboard them, the cargo they carry, and the marine environment. This study conducts a comprehensive literature review on research in maritime accidents, comprising 572 papers published in 125 journals over the 50 years from 1965 to 2014. The patterns of evolution of the researchers, the journals, the disciplines involved, the research methods, the major issues and causes, and the data sources are identified, and the changes explained. We find that the main focus of research in maritime accidents has shifted over the past 50 years from naval architecture to human error, and may continue to expand into socio-economic factors. In addition, future research in maritime accidents will be multi-disciplinary, use multiple data sources, and adopt advanced research methods, to account for complex interactions between the natural environment, the development of naval technology, human behavior, and shipping market conditions. Copyright © 2016 Elsevier Ltd. All rights reserved.

Marzipan: polymerase chain reaction-driven methods for authenticity control.

PubMed

Brüning, Philipp; Haase, Ilka; Matissek, Reinhard; Fischer, Markus

2011-11-23

According to German food guidelines, almonds are the only oilseed ingredient allowed for the production of marzipan. Persipan is a marzipan surrogate in which the almonds are replaced by apricot or peach kernels. Cross-contamination of marzipan products with persipan may occur if both products are produced using the same production line. Adulterations or dilutions, respectively, of marzipan with other plant-derived products, for example, lupine or pea, have also been found. Almond and apricot plants are closely related. Consequently, classical analytical methods for the identification/differentiation often fail or are not sensitive enough to quantify apricot concentrations below 1%. Polymerase chain reaction (PCR)-based methods have been shown to enable the differentiation of closely related plant species in the past. These methods are characterized by high specificity and low detection limits. Isolation methods were developed and evaluated especially with respect to the matrix marzipan in terms of yield, purity, integrity, and amplificability of the isolated DNA. For the reliable detection of apricot, peach, pea, bean, lupine, soy, cashew, pistachio, and chickpea, qualitative standard and duplex PCR methods were developed and established. The applicability of these methods was tested by cross-reaction studies and analysis of spiked raw pastes. Contaminations at the level of 0.1% could be detected.

The Multigrid-Mask Numerical Method for Solution of Incompressible Navier-Stokes Equations

NASA Technical Reports Server (NTRS)

Ku, Hwar-Ching; Popel, Aleksander S.

1996-01-01

A multigrid-mask method for solution of incompressible Navier-Stokes equations in primitive variable form has been developed. The main objective is to apply this method in conjunction with the pseudospectral element method solving flow past multiple objects. There are two key steps involved in calculating flow past multiple objects. The first step utilizes only Cartesian grid points. This homogeneous or mask method step permits flow into the interior rectangular elements contained in objects, but with the restriction that the velocity for those Cartesian elements within and on the surface of an object should be small or zero. This step easily produces an approximate flow field on Cartesian grid points covering the entire flow field. The second or heterogeneous step corrects the approximate flow field to account for the actual shape of the objects by solving the flow field based on the local coordinates surrounding each object and adapted to it. The noise occurring in data communication between the global (low frequency) coordinates and the local (high frequency) coordinates is eliminated by the multigrid method when the Schwarz Alternating Procedure (SAP) is implemented. Two dimensional flow past circular and elliptic cylinders will be presented to demonstrate the versatility of the proposed method. An interesting phenomenon is found that when the second elliptic cylinder is placed in the wake of the first elliptic cylinder a traction force results in a negative drag coefficient.

An Interactive, Physics-Based Unmanned Ground Vehicle Simulator Leveraging Open Source Gaming Technology: Progress in the Development and Application of the Virtual Autonomous Navigation Environment (VANE) Desktop

DTIC Science & Technology

2009-01-01

interface, mechatronics, video games 1. INTRODUCTION Engineering methods have substantially and continuously evolved over the past 40 years. In the past...1970s, video games have pioneered interactive simulation and laid the groundwork for inexpensive computing that individuals, corporations, and...purposes. This has not gone unnoticed, and software technology and techniques evolved for video games are beginning to have extraordinary impact in

Parameter Studies, time-dependent simulations and design with automated Cartesian methods

NASA Technical Reports Server (NTRS)

Aftosmis, Michael

2005-01-01

Over the past decade, NASA has made a substantial investment in developing adaptive Cartesian grid methods for aerodynamic simulation. Cartesian-based methods played a key role in both the Space Shuttle Accident Investigation and in NASA's return to flight activities. The talk will provide an overview of recent technological developments focusing on the generation of large-scale aerodynamic databases, automated CAD-based design, and time-dependent simulations with of bodies in relative motion. Automation, scalability and robustness underly all of these applications and research in each of these topics will be presented.

Seismic retrofit guidelines for Utah highway bridges.

DOT National Transportation Integrated Search

2009-05-01

Much of Utahs population dwells in a seismically active region, and many of the bridges connecting transportation lifelines predate the rigorous seismic design standards that have been developed in the past 10-20 years. Seismic retrofitting method...

Past, present and prospect of an Artificial Intelligence (AI) based model for sediment transport prediction

NASA Astrophysics Data System (ADS)

Afan, Haitham Abdulmohsin; El-shafie, Ahmed; Mohtar, Wan Hanna Melini Wan; Yaseen, Zaher Mundher

2016-10-01

An accurate model for sediment prediction is a priority for all hydrological researchers. Many conventional methods have shown an inability to achieve an accurate prediction of suspended sediment. These methods are unable to understand the behaviour of sediment transport in rivers due to the complexity, noise, non-stationarity, and dynamism of the sediment pattern. In the past two decades, Artificial Intelligence (AI) and computational approaches have become a remarkable tool for developing an accurate model. These approaches are considered a powerful tool for solving any non-linear model, as they can deal easily with a large number of data and sophisticated models. This paper is a review of all AI approaches that have been applied in sediment modelling. The current research focuses on the development of AI application in sediment transport. In addition, the review identifies major challenges and opportunities for prospective research. Throughout the literature, complementary models superior to classical modelling.

Theories and Research in Educational Technology and Distance Learning Instruction through Blackboard

ERIC Educational Resources Information Center

Ouyang, John Ronghua; Stanley, Nile

2014-01-01

Educational technology is a fast-growing and increasingly developed subject in education during the past 50 years. The focus of the development of its theories and research is oriented into the methods and effectiveness of its implementation. This presentation is reviewing various educational technology related theories, exploring and discussing…

Maternal Employment and Child Development: A Fresh Look Using Newer Methods

ERIC Educational Resources Information Center

Hill, Jennifer L.; Waldfogel, Jane; Brooks-Gunn, Jeanne; Han, Wen-Jui

2005-01-01

The employment rate for mothers with young children has increased dramatically over the past 25 years. Estimating the effects of maternal employment on children's development is challenged by selection bias and the missing data endemic to most policy research. To address these issues, this study uses propensity score matching and multiple…

Is Graduate Students' Research Exposure to Business Ethics Comprehensive?

ERIC Educational Resources Information Center

Piotrowski, Chris; Guyette, Roger W., Jr.

2013-01-01

Graduate-level education, at its core, has a focus on specific, in-depth disciplinary subject matter, with a strong emphasis on methods, conceptual framework, and research. For the developing student, exposure to both past and current research developments is mainly achieved by reading and studying articles published in leading journals in their…

TEACHING MACHINES AND PROGRAMMED LEARNING, A SOURCE BOOK.

ERIC Educational Resources Information Center

LUMSDAINE, A.A., ED.; GLASER, ROBERT, ED.

BROUGHT TOGETHER HERE IS THE WIDELY-SCATTERED LITERATURE ON SELF-INSTRUCTIONAL PROGRAMS AND DEVICES BY LEADERS, PAST AND PRESENT, IN THEIR DEVELOPMENT. S.L. PRESSEY IN HIS ARTICLES DESCRIBES THE APPARATUS, METHODS, THEORY, AND RESULTS ATTENDANT UPON USE OF HIS TEST-SCORING DEVICES. B.F. SKINNER IN HIS ARTICLES DEVELOPS THEORY, DESCRIBES MACHINES,…

Lumber Grading With A Computer Vision System

Treesearch

Richard W. Conners; Tai-Hoon Cho; Philip A. Araman

1989-01-01

Over the past few years significant progress has been made in developing a computer vision system for locating and identifying defects on surfaced hardwood lumber. Unfortunately, until September of 1988 little research had gone into developing methods for analyzing rough lumber. This task is arguably more complex than the analysis of surfaced lumber. The prime...

Extension of FRI for modeling of electrocardiogram signals.

PubMed

Quick, R Frank; Crochiere, Ronald E; Hong, John H; Hormati, Ali; Baechler, Gilles

2012-01-01

Recent work has developed a modeling method applicable to certain types of signals having a "finite rate of innovation" (FRI). Such signals contain a sparse collection of time- or frequency-limited pulses having a restricted set of allowable pulse shapes. A limitation of past work on FRI is that all of the pulses must have the same shape. Many real signals, including electrocardiograms, consist of pulses with varying widths and asymmetry, and therefore are not well fit by the past FRI methods. We present an extension of FRI allowing pulses having variable pulse width (VPW) and asymmetry. We show example results for electrocardiograms and discuss the possibility of application to signal compression and diagnostics.

Learning from escaped prescribed fire reviews [Abstract

Treesearch

Anne Black; Dave Thomas; James Saveland

2011-01-01

Over the past decade, the wildland fire community has developed a number of innovative methods for conducting a review following escape of a prescribed fire. The stated purpose been to identify methods that not only meet policy requirements, but to reduce future escapes. Implicit is the assumption that a review leads to learning. Yet, as organizational learning expert...

Status and future prospects of using numerical methods to study complex flows at High Reynolds numbers

NASA Technical Reports Server (NTRS)

Maccormack, R. W.

1978-01-01

The calculation of flow fields past aircraft configuration at flight Reynolds numbers is considered. Progress in devising accurate and efficient numerical methods, in understanding and modeling the physics of turbulence, and in developing reliable and powerful computer hardware is discussed. Emphasis is placed on efficient solutions to the Navier-Stokes equations.

Likelihood Methods for Adaptive Filtering and Smoothing. Technical Report #455.

ERIC Educational Resources Information Center

Butler, Ronald W.

The dynamic linear model or Kalman filtering model provides a useful methodology for predicting the past, present, and future states of a dynamic system, such as an object in motion or an economic or social indicator that is changing systematically with time. Recursive likelihood methods for adaptive Kalman filtering and smoothing are developed.…

The Career Counseling Needs of Mothers in the Criminal Justice System

ERIC Educational Resources Information Center

Laux, John M.; Calmes, Stephanie; Moe, Jeffry L.; Dupuy, Paula J.; Cox, Jane A.; Ventura, Lois A.; Williamson, Celia; Benjamin, Barbaranne J.; Lambert, Eric

2011-01-01

The past 2 decades have produced a rapid increase in the numbers of incarcerated mothers. This study investigated both career development and the career counseling needs of mothers in the criminal justice system. A mixed-methods design was employed using both qualitative interviews (n = 1,161) and quantitative survey methods (n = 1,170).…

Developing a Theory of Digitally-Enabled Trial-Based Problem Solving through Simulation Methods: The Case of Direct-Response Marketing

ERIC Educational Resources Information Center

Clark, Joseph Warren

2012-01-01

In turbulent business environments, change is rapid, continuous, and unpredictable. Turbulence undermines those adaptive problem solving methods that generate solutions by extrapolating from what worked (or did not work) in the past. To cope with this challenge, organizations utilize trial-based problem solving (TBPS) approaches in which they…

Critical review: Injectability of calcium phosphate pastes and cements.

PubMed

O'Neill, R; McCarthy, H O; Montufar, E B; Ginebra, M-P; Wilson, D I; Lennon, A; Dunne, N

2017-03-01

Calcium phosphate cements (CPC) have seen clinical success in many dental and orthopaedic applications in recent years. The properties of CPC essential for clinical success are reviewed in this article, which includes properties of the set cement (e.g. bioresorbability, biocompatibility, porosity and mechanical properties) and unset cement (e.g. setting time, cohesion, flow properties and ease of delivery to the surgical site). Emphasis is on the delivery of calcium phosphate (CaP) pastes and CPC, in particular the occurrence of separation of the liquid and solid components of the pastes and cements during injection; and established methods to reduce this phase separation. In addition a review of phase separation mechanisms observed during the extrusion of other biphasic paste systems and the theoretical models used to describe these mechanisms are discussed. Occurrence of phase separation of calcium phosphate pastes and cements during injection limits their full exploitation as a bone substitute in minimally invasive surgical applications. Due to lack of theoretical understanding of the phase separation mechanism(s), optimisation of an injectable CPC that satisfies clinical requirements has proven difficult. However, phase separation of pastes during delivery has been the focus across several research fields. Therefore in addition to a review of methods to reduce phase separation of CPC and the associated constraints, a review of phase separation mechanisms observed during extrusion of other pastes and the theoretical models used to describe these mechanisms is presented. It is anticipated this review will benefit future attempts to develop injectable calcium phosphate based systems. Crown Copyright © 2016. Published by Elsevier Ltd. All rights reserved.

A brief review on recent developments of electrochemical sensors in environmental application for PGMs.

PubMed

Silwana, Bongiwe; Van Der Horst, Charlton; Iwuoha, Emmanuel; Somerset, Vernon

2016-12-05

This study offers a brief review of the latest developments and applications of electrochemical sensors for the detection of Platinum Group Metals (PGMs) using electrochemical sensors. In particular, significant advances in electrochemical sensors made over the past decade and sensing methodologies associated with the introduction of nanostructures are highlighted. Amongst a variety of detection methods that have been developed for PGMs, nanoparticles offer the unrivaled merits of high sensitivity. Rapid detection of PGMs is a key step to promote improvement of the public health and individual quality of life. Conventional methods to detect PGMs rely on time-consuming and labor intensive procedures such as extraction, isolation, enrichment, counting, etc., prior to measurement. This results in laborious sample preparation and testing over several days. This study reviewed the state-of-the-art application of nanoparticles (NPs) in electrochemical analysis of environmental pollutants. This review is intended to provide environmental scientists and engineers an overview of current rapid detection methods, a close look at the nanoparticles based electrodes and identification of knowledge gaps and future research needs. We summarize electrodes that have been used in the past for detection of PGMs. We describe several examples of applications in environmental electrochemical sensors and performance in terms of sensitivity and selectivity for all the sensors utilized for PGMs detection. NPs have promising potential to increase competitiveness of electrochemical sensors in environmental monitoring, though this review has focused mainly on sensors used in the past decade for PGMs detection. This review therefore provides a synthesis of outstanding performances in recent advances in the nanosensor application for PGMs determination.

Maximum-likelihood techniques for joint segmentation-classification of multispectral chromosome images.

PubMed

Schwartzkopf, Wade C; Bovik, Alan C; Evans, Brian L

2005-12-01

Traditional chromosome imaging has been limited to grayscale images, but recently a 5-fluorophore combinatorial labeling technique (M-FISH) was developed wherein each class of chromosomes binds with a different combination of fluorophores. This results in a multispectral image, where each class of chromosomes has distinct spectral components. In this paper, we develop new methods for automatic chromosome identification by exploiting the multispectral information in M-FISH chromosome images and by jointly performing chromosome segmentation and classification. We (1) develop a maximum-likelihood hypothesis test that uses multispectral information, together with conventional criteria, to select the best segmentation possibility; (2) use this likelihood function to combine chromosome segmentation and classification into a robust chromosome identification system; and (3) show that the proposed likelihood function can also be used as a reliable indicator of errors in segmentation, errors in classification, and chromosome anomalies, which can be indicators of radiation damage, cancer, and a wide variety of inherited diseases. We show that the proposed multispectral joint segmentation-classification method outperforms past grayscale segmentation methods when decomposing touching chromosomes. We also show that it outperforms past M-FISH classification techniques that do not use segmentation information.

How well can body size represent effects of the environment on demographic rates? Disentangling correlated explanatory variables.

PubMed

Brooks, Mollie E; Mugabo, Marianne; Rodgers, Gwendolen M; Benton, Timothy G; Ozgul, Arpat

2016-03-01

Demographic rates are shaped by the interaction of past and current environments that individuals in a population experience. Past environments shape individual states via selection and plasticity, and fitness-related traits (e.g. individual size) are commonly used in demographic analyses to represent the effect of past environments on demographic rates. We quantified how well the size of individuals captures the effects of a population's past and current environments on demographic rates in a well-studied experimental system of soil mites. We decomposed these interrelated sources of variation with a novel method of multiple regression that is useful for understanding nonlinear relationships between responses and multicollinear explanatory variables. We graphically present the results using area-proportional Venn diagrams. Our novel method was developed by combining existing methods and expanding upon them. We showed that the strength of size as a proxy for the past environment varied widely among vital rates. For instance, in this organism with an income breeding life history, the environment had more effect on reproduction than individual size, but with substantial overlap indicating that size encompassed some of the effects of the past environment on fecundity. This demonstrates that the strength of size as a proxy for the past environment can vary widely among life-history processes within a species, and this variation should be taken into consideration in trait-based demographic or individual-based approaches that focus on phenotypic traits as state variables. Furthermore, the strength of a proxy will depend on what state variable(s) and what demographic rate is being examined; that is, different measures of body size (e.g. length, volume, mass, fat stores) will be better or worse proxies for various life-history processes. © 2016 The Authors. Journal of Animal Ecology © 2016 British Ecological Society.

48 CFR 715.305 - Proposal evaluation.

Code of Federal Regulations, 2011 CFR

2011-10-01

....305 Section 715.305 Federal Acquisition Regulations System AGENCY FOR INTERNATIONAL DEVELOPMENT CONTRACTING METHODS AND CONTRACT TYPES CONTRACTING BY NEGOTIATION Source Selection 715.305 Proposal evaluation... Contractor Performance System to evaluate past performance. (Access to the system by USAID contracting office...

Let's Be Blunt: Consumption Methods Matter Among Black Marijuana Smokers.

PubMed

Montgomery, LaTrice; Bagot, Kara

2016-05-01

Despite the high prevalence of blunt (i.e., hollowed-out cigars that are filled with marijuana) use among Black marijuana smokers, few studies have examined if and how blunt users differ from traditional joint users. The current study compared the prevalence and patterns of use for those who smoked blunts in the past month (i.e., blunt users) with those who used marijuana through other methods (i.e., other marijuana users). The sample included 935 Black past-month marijuana smokers participating in the 2013 National Survey on Drug Use and Health. Among past-month marijuana smokers, 73.2% were blunt users and 26.8% were other marijuana users. Overall, blunt users initiated marijuana use at an earlier age (15.9 vs. 17.3 years, p < .01) and reported more days of marijuana use in the past month (16 vs. 8 days, p < .01) than did other marijuana users. There were also differences by gender. Among females, blunt users reported a higher odds of past-year marijuana abuse or dependence (23.8%) than other marijuana users (11.2%) (adjusted odds ratio = 1.23, 95% CI [1.12, 3.17], p < .01). However, blunt-using males reported similar odds of past-year marijuana abuse or dependence (approximately 25%) as other marijuana-using males. These findings highlight the need for targeted interventions for blunt users as a subgroup of marijuana users, especially among Black females, who may be at increased risk for developing a marijuana use disorder as a result of blunt smoking.

Voltammetric sensor based on carbon paste electrode modified with molecular imprinted polymer for determination of sulfadiazine in milk and human serum.

PubMed

Sadeghi, Susan; Motaharian, Ali

2013-12-01

A new sensitive voltammetric sensor for determination of sulfadiazine is described. The developed sensor is based on carbon paste electrode modified with sulfadiazine imprinted polymer (MIP) as a recognition element. For comparison, a non-imprinted polymer (NIP) modified carbon paste electrode was prepared. Cyclic voltammetry (CV) and differential pulse voltammetry (DPV) methods were performed to study the binding event and electrochemical behavior of sulfadiazine at the modified carbon paste electrodes. The determination of sulfadiazine after its extraction onto the electrode surface was carried out by DPV at 0.92 V vs. Ag/AgCl owing to oxidation of sulfadiazine. Under the optimized operational conditions, the peak current obtained at the MIP modified carbon paste electrode was proportional to the sulfadiazine concentration within the range of 2.0×10(-7)-1.0×10(-4) mol L(-1) with a detection limit and sensitivity of 1.4×10(-7) mol L(-1) and 4.2×10(5) μA L mol(-1), respectively. The reproducibility of the developed sensor in terms of relative standard deviation was 2.6%. The sensor was successfully applied for determination of sulfadiazine in spiked cow milk and human serum samples with recovery values in the range of 96.7-100.9%. © 2013.

PROGRAMMED INSTRUCTION AND TEACHING MACHINES IN SCHOOLS OF DEVELOPING COUNTRIES AND TECHNOLOGY IN EDUCATION--PAST, PRESENT, AND FUTURE.

ERIC Educational Resources Information Center

SPAULDING, SETH

IN THE FIRST PART OF THE DOCUMENT, RESULTS OF GROUP DISCUSSIONS ON THE USE OF PROGRAMED INSTRUCTION (PI) AND TEACHING MACHINES IN DEVELOPING COUNTRIES ARE SUMMARIZED, EMPHASIZING (1) PROBLEMS OF DEVELOPING NATIONS, (2) QUESTIONS ON PI METHODS AND MATERIALS, AND (3) STRATEGIES FOR THE INTRODUCTION OF PI. THE SECOND PART OF THE DOCUMENT IS AN ESSAY…

Native SAD is maturing.

PubMed

Rose, John P; Wang, Bi-Cheng; Weiss, Manfred S

2015-07-01

Native SAD phasing uses the anomalous scattering signal of light atoms in the crystalline, native samples of macromolecules collected from single-wavelength X-ray diffraction experiments. These atoms include sodium, magnesium, phosphorus, sulfur, chlorine, potassium and calcium. Native SAD phasing is challenging and is critically dependent on the collection of accurate data. Over the past five years, advances in diffraction hardware, crystallographic software, data-collection methods and strategies, and the use of data statistics have been witnessed which allow 'highly accurate data' to be routinely collected. Today, native SAD sits on the verge of becoming a 'first-choice' method for both de novo and molecular-replacement structure determination. This article will focus on advances that have caught the attention of the community over the past five years. It will also highlight both de novo native SAD structures and recent structures that were key to methods development.

Professional Development for Sessional Staff in Higher Education: A Review of Current Evidence

ERIC Educational Resources Information Center

Hitch, Danielle; Mahoney, Paige; Macfarlane, Susie

2018-01-01

The aim of this study was to provide an integrated review of evidence published in the past decade around professional development for sessional staff in higher education. Using the Integrating Theory, Evidence and Action method, the review analysed recent evidence using the three principles of the Benchmarking Leadership and Advancement of…

A simple and rapid chromatographic method to determine unauthorized basic colorants (rhodamine B, auramine O, and pararosaniline) in processed foods.

PubMed

Tatebe, Chiye; Zhong, Xining; Ohtsuki, Takashi; Kubota, Hiroki; Sato, Kyoko; Akiyama, Hiroshi

2014-09-01

A simple and rapid high-performance liquid chromatography (HPLC) method to determine basic colorants such as pararosaniline (PA), auramine O (AO), and rhodamine B (RB) in various processed foods was developed. Linearity of the calibration curves ranged from 0.05 to 50 μg/mL for PA and 0.05-100 μg/mL for AO and RB. The detection and quantification limits (LOD and LOQ) of the basic colorants, which were evaluated as signal-to-noise ratios of 3 for LOD and 10 for LOQ, ranged from 0.0125 to 0.05 and 0.025 to 0.125 μg/g, respectively. The recoveries and relative standard deviations of three basic colorants in six processed foods, namely, chili sauce, curry paste, gochujang (hot pepper paste), tandoori chicken (roasted chicken prepared with yogurt and spices), powder soup, and shrimp powder ranged from 70.2% to 102.8% and 0.8% to 8.0%, respectively. The intraday precision of the recovery test ranged from 1.7% to 4.5%, whereas the interday precision ranged from 3.7% to 7.7%. The reported method has been successfully applied to basic colorant determination in various processed foods such as fat-based food matrices (curry paste and tandoori chicken), chili products (gochujang and chili sauce), and protein-based products (shrimp powder and powder soup). Thin layer chromatography and liquid chromatography/mass spectrometry methods for the determination of basic colorants in processed foods were also developed for rapid analysis and identification, respectively. These methods are very useful for monitoring unauthorized basic colorants in inspection centers or quarantine laboratories in many countries.

Experimental investigation into infrasonic emissions from atmospheric turbulence.

PubMed

Shams, Qamar A; Zuckerwar, Allan J; Burkett, Cecil G; Weistroffer, George R; Hugo, Derek R

2013-03-01

Clear air turbulence (CAT) is the leading cause of in-flight injuries and in severe cases can result in fatalities. The purpose of this work is to design and develop an infrasonic array network for early warning of clear air turbulence. The infrasonic system consists of an infrasonic three-microphone array, compact windscreens, and data management system. Past experimental efforts to detect acoustic emissions from CAT have been limited. An array of three infrasonic microphones, operating in the field at NASA Langley Research Center, on several occasions received signals interpreted as infrasonic emissions from CAT. Following comparison with current lidar and other past methods, the principle of operation, the experimental methods, and experimental data are presented for case studies and confirmed by pilot reports. The power spectral density of the received signals was found to fit a power law having an exponent of -6 to -7, which is found to be characteristics of infrasonic emissions from CAT, in contrast to findings of the past.

Solar flare neon and solar cosmic ray fluxes in the past using gas-rich meteorites

NASA Technical Reports Server (NTRS)

Nautiyal, C. M.; Rao, M. N.

1986-01-01

Methods were developed earlier to deduce the composition of solar flare neon and to determine the solar cosmic ray proton fluxes in the past using etched lunar samples and at present, these techniques are extended to gas rich meteorites. By considering high temperature Ne data points for Pantar, Fayetteville and other gas rich meteorites and by applying the three component Ne-decomposition methods, the solar cosmic ray and galactic cosmic ray produced spallation Ne components from the trapped SF-Ne was resolved. Using appropiate SCR and GCR production rates, in the case of Pantar, for example, a GCR exposure age of 2 m.y. was estimated for Pantar-Dark while Pantar-Light yielded a GCR age of approx. 3 m.y. However the SCR exposure age of Pantar-Dark is two orders of magnitude higher than the average surface exposure ages of lunar soils. The possibility of higher proton fluxes in the past is discussed.

HiveScience: A Citizen Science Project for Beekeepers##

EPA Science Inventory

Over the past decade, beekeepers have been experiencing unacceptably high colony losses while the demand for insect-pollinated crops has tripled during the same time period. Underscoring the need to develop reliable methods for predicting colony health, the United States Departme...

CAN WE BELIEVE OUR RESULTS?

EPA Science Inventory

Numerous waterborne outbreaks of cryptosporidiosis have occurred recently with the most notable being the 1993 episode in Milwaukee. Due to these outbreaks and the concern for public health, the past decade has seen a massive effort expended on the development of methods to dete...

Fast preconditioned multigrid solution of the Euler and Navier-Stokes equations for steady, compressible flows

NASA Astrophysics Data System (ADS)

Caughey, David A.; Jameson, Antony

2003-10-01

New versions of implicit algorithms are developed for the efficient solution of the Euler and Navier-Stokes equations of compressible flow. The methods are based on a preconditioned, lower-upper (LU) implementation of a non-linear, symmetric Gauss-Seidel (SGS) algorithm for use as a smoothing algorithm in a multigrid method. Previously, this method had been implemented for flows in quasi-one-dimensional ducts and for two-dimensional flows past airfoils on boundary-conforming O-type grids for a variety of symmetric limited positive (SLIP) spatial approximations, including the scalar dissipation and convective upwind split pressure (CUSP) schemes. Here results are presented for both inviscid and viscous (laminar) flows past airfoils on boundary-conforming C-type grids. The method is significantly faster than earlier explicit or implicit methods for inviscid problems, allowing solution of these problems to the level of truncation error in three to five multigrid cycles. Viscous solutions still require as many as twenty multigrid cycles.

Review of Recent Methodological Developments in Group-Randomized Trials: Part 2-Analysis.

PubMed

Turner, Elizabeth L; Prague, Melanie; Gallis, John A; Li, Fan; Murray, David M

2017-07-01

In 2004, Murray et al. reviewed methodological developments in the design and analysis of group-randomized trials (GRTs). We have updated that review with developments in analysis of the past 13 years, with a companion article to focus on developments in design. We discuss developments in the topics of the earlier review (e.g., methods for parallel-arm GRTs, individually randomized group-treatment trials, and missing data) and in new topics, including methods to account for multiple-level clustering and alternative estimation methods (e.g., augmented generalized estimating equations, targeted maximum likelihood, and quadratic inference functions). In addition, we describe developments in analysis of alternative group designs (including stepped-wedge GRTs, network-randomized trials, and pseudocluster randomized trials), which require clustering to be accounted for in their design and analysis.

Review of Research on Educational Leadership and Management in Asia: A Comparative Analysis of Research Topics and Methods, 1995-2012

ERIC Educational Resources Information Center

Hallinger, Philip; Chen, Junjun

2015-01-01

Over the past two decades scholars have called for a more concerted effort to develop an empirically grounded literature on educational leadership outside of mainstream "Western" contexts. This paper reports the results of a review of research topics and methods that comprise the literature on educational leadership and management in…

In-situ visualisation of hyphal structure and arrangement in mycoprotein pastes.

PubMed

Miri, Taghi; Cox, Philip W; Fryer, Peter J

2003-02-01

A novel method to examine the morphology and structure of fungal hyphae in solid pastes used for the production of meat alternative product is presented. A sample of fermentation broth was fluorescently stained with Calcofluor White and added back to the broth, mixed and then a paste made using ultra-filtration. Fibre visualisation was by fluorescence microscopy and quantification by manual image analysis. This method enables the determination of fibre length and orientation within the paste. Imaging of the hypha fibre paste proved that its structure was 'isotropic', i.e. that fibres were randomly oriented in all directions. Processing of the paste altered the orientation of the fibres, the method was able to identify and quantify the changes in fibre position.

Developments of solid materials for UF 6 sampling

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, Nicholas; Hebden, Andrew; Savina, Joseph

2017-11-15

This project demonstrated that a device using majority Commercial Off the Shelf (COTS) components could be used to collect uranium hexafluoride samples safely from gaseous or solid sources. The device was based on the successful Cristallini method developed by ABACC over the past 10 years. The system was designed to capture and store the UF 6 as an inert fluoride salt to ease transportation regulations. In addition, the method was considerably faster than traditional cryogenic methods, collected enough material to perform analyses without undue waste, and could be used either inside a facility or in the storage yard.

Time Domain Radar Laboratory Operating System Development and Transient EM Analysis.

DTIC Science & Technology

1981-09-01

polarization of the return, arg used. Other similar methods use amplitude and phase differences or special properties of Rayleigh region scattering. All these...3ptias Inverse Scattering ... 19 2. "!xact" Inverse Scattering !Nethod .. 20 3. Other Methods ................... 21 C. REVIEW OF TDRL PROGRESS AT SPS...explicit independant variable in.most methods . In the past, frequency domain analysis has been the primary means of analyzing aan-monochromatic EM

Pressure algorithm for elliptic flow calculations with the PDF method

NASA Technical Reports Server (NTRS)

Anand, M. S.; Pope, S. B.; Mongia, H. C.

1991-01-01

An algorithm to determine the mean pressure field for elliptic flow calculations with the probability density function (PDF) method is developed and applied. The PDF method is a most promising approach for the computation of turbulent reacting flows. Previous computations of elliptic flows with the method were in conjunction with conventional finite volume based calculations that provided the mean pressure field. The algorithm developed and described here permits the mean pressure field to be determined within the PDF calculations. The PDF method incorporating the pressure algorithm is applied to the flow past a backward-facing step. The results are in good agreement with data for the reattachment length, mean velocities, and turbulence quantities including triple correlations.

Calculation of potential flow past non-lifting bodies at angle of attack using axial and surface singularity methods. M.S. Thesis. Contractor Report, 1 Jan. 1981 - 31 Aug. 1982

NASA Technical Reports Server (NTRS)

Shu, J. Y.

1983-01-01

Two different singularity methods have been utilized to calculate the potential flow past a three dimensional non-lifting body. Two separate FORTRAN computer programs have been developed to implement these theoretical models, which will in the future allow inclusion of the fuselage effect in a pair of existing subcritical wing design computer programs. The first method uses higher order axial singularity distributions to model axisymmetric bodies of revolution in an either axial or inclined uniform potential flow. Use of inset of the singularity line away from the body for blunt noses, and cosine-type element distributions have been applied to obtain the optimal results. Excellent agreement to five significant figures with the exact solution pressure coefficient value has been found for a series of ellipsoids at different angles of attack. Solutions obtained for other axisymmetric bodies compare well with available experimental data. The second method utilizes distributions of singularities on the body surface, in the form of a discrete vortex lattice. This program is capable of modeling arbitrary three dimensional non-lifting bodies. Much effort has been devoted to finding the optimal method of calculating the tangential velocity on the body surface, extending techniques previously developed by other workers.

Configurations and calibration methods for passive sampling techniques.

PubMed

Ouyang, Gangfeng; Pawliszyn, Janusz

2007-10-19

Passive sampling technology has developed very quickly in the past 15 years, and is widely used for the monitoring of pollutants in different environments. The design and quantification of passive sampling devices require an appropriate calibration method. Current calibration methods that exist for passive sampling, including equilibrium extraction, linear uptake, and kinetic calibration, are presented in this review. A number of state-of-the-art passive sampling devices that can be used for aqueous and air monitoring are introduced according to their calibration methods.

Second-Order Slender-Body Theory-Axisymmetric Flow

NASA Technical Reports Server (NTRS)

VanDyke, Milton D.

1959-01-01

Slender-body theory for subsonic and supersonic flow past bodies of revolution is extended to a second approximation, Methods are developed for handling the difficulties that arise at round ends, Comparison is made with experiment and with other theories for several simple shapes.

Contextmapping in Primary Design and Technology Education: A Fruitful Method to Develop Empathy for and Insight in User Needs

ERIC Educational Resources Information Center

Klapwijk, Remke; Van Doorn, Fenne

2015-01-01

Human-centered design is of growing importance for professional designers and in the past two decades a series of techniques for designers to develop understanding of and empathy with a diversity of users has been developed within this field. In the second half of the twentieth century, intended users were involved late in the design process, i.e.…

Novel Injectable Calcium Phosphate Bone Cement from Wet Chemical Precipitation Method

NASA Astrophysics Data System (ADS)

Hablee, S.; Sopyan, I.; Mel, M.; Salleh, H. M.; Rahman, M. M.; Singh, R.

2017-06-01

Calcium phosphate cement has been prepared via chemical precipitation method for injectable bone filling materials. Calcium hydroxide, Ca(OH)2, and diammonium hydrogen phosphate, (NH4)2HPO4, were used as calcium and phosphorus precursors respectively. The synthesized powder was mixed with water at different powder-to-liquid (P/L) ratios, which was adjusted at 0.8, 0.9, 1.0, 1.1 and 1.2. The influence of P/L ratio on the injectability, setting time and mechanical strength of calcium phosphate cement paste has been evaluated. The synthesized powder appeared as purely hydroxyapatite with nanosized and agglomerated spherical particles. All cement pastes show excellent injectability except for the paste with P/L ratio 1.2. Calcium phosphate cement with P/L ratio 1.1 shows the ideal cement for bone filler application with good injectability, the initial and final setting times of 30 min and 160 min, and the compression strength of 2.47 MPa. The result indicated that the newly developed calcium phosphate cement is physically suitable for bone filler application. This paper presents our investigation on the effect of P/L ratio on the handling and mechanical properties of calcium phosphate cement prepared via wet chemical precipitation method.

Knowledge Domain and Emerging Trends in Organic Photovoltaic Technology: A Scientometric Review Based on CiteSpace Analysis.

PubMed

Xiao, Fengjun; Li, Chengzhi; Sun, Jiangman; Zhang, Lianjie

2017-01-01

To study the rapid growth of research on organic photovoltaic (OPV) technology, development trends in the relevant research are analyzed based on CiteSpace software of text mining and visualization in scientific literature. By this analytical method, the outputs and cooperation of authors, the hot research topics, the vital references and the development trend of OPV are identified and visualized. Different from the traditional review articles by the experts on OPV, this work provides a new method of visualizing information about the development of the OPV technology research over the past decade quantitatively.

Knowledge Domain and Emerging trends in Organic Photovoltaic Technology: A Scientometric Review Based on CiteSpace Analysis

NASA Astrophysics Data System (ADS)

Xiao, Fengjun; Li, Chengzhi; Sun, Jiangman; Zhang, Lianjie

2017-09-01

To study the rapid growth of research on organic photovoltaic (OPV) technology, development trends in the relevant research are analyzed based on CiteSpace software of text mining and visualization in scientific literature. By this analytical method, the outputs and cooperation of authors, the hot research topics, the vital references and the development trend of OPV are identified and visualized. Different from the traditional review articles by the experts on OPV, this work provides a new method of visualizing information about the development of the OPV technology research over the past decade quantitatively.

MMP Inhibitors: Past, present and future.

PubMed

Cathcart, Jillian M; Cao, Jian

2015-06-01

  Development of inhibitors of matrix metalloproteinases (MMPs) has been fraught with challenges. Early compounds largely failed due to poor selectivity and bioavailability. Dose-limiting side effects, off-target interactions, and improperly designed clinical trials significantly impeded clinical success. As information becomes available and technology evolves, tools to combat these obstacles have been developed. Improved methods for high throughput screening and drug design have led to identification of compounds exhibiting high potency, binding affinity, and favorable pharmacokinetic profiles. Current research into MMP inhibitors employs innovative approaches for drug delivery methods and allosteric inhibitors. Such innovation is key for development of clinically successful compounds.

Developing comparative criminology and the case of China: an introduction.

PubMed

Liu, Jianhong

2007-02-01

Although comparative criminology has made significant development during the past decade or so, systematic empirical research has only developed along a few topics. Comparative criminology has never occupied a central position in criminology. This article analyzes the major theoretical and methodological impediments in the development of comparative criminology. It stresses a need to shift methodology from a conventional primary approach that uses the nation as the unit of analysis to an in-depth case study method as a primary methodological approach. The article maintains that case study method can overcome the limitation of its descriptive tradition and become a promising methodological approach for comparative criminology.

Genetic modification of hematopoietic stem cells with nonviral systems: past progress and future prospects.

PubMed

Papapetrou, E P; Zoumbos, N C; Athanassiadou, A

2005-10-01

Serious unwanted complications provoked by retroviral gene transfer into hematopoietic stem cells (HSCs) have recently raised the need for the development and assessment of alternative gene transfer vectors. Within this context, nonviral gene transfer systems are attracting increasing interest. Their main advantages include low cost, ease of handling and large-scale production, large packaging capacity and, most importantly, biosafety. While nonviral gene transfer into HSCs has been restricted in the past by poor transfection efficiency and transient maintenance, in recent years, biotechnological developments are converting nonviral transfer into a realistic approach for genetic modification of cells of hematopoietic origin. Herein we provide an overview of past accomplishments in the field of nonviral gene transfer into hematopoietic progenitor/stem cells and we point at future challenges. We argue that episomally maintained self-replicating vectors combined with physical methods of delivery show the greatest promise among nonviral gene transfer strategies for the treatment of disorders of the hematopoietic system.

The Development of Memory Maintenance: Children's Use of Phonological Rehearsal and Attentional Refreshment in Working Memory Tasks

ERIC Educational Resources Information Center

Tam, Helen; Jarrold, Christopher; Baddeley, Alan D.; Sabatos-DeVito, Maura

2010-01-01

Past research suggests that children begin to phonologically rehearse at around 7 years of age. Less is known regarding the development of refreshment, an attention-based maintenance mechanism. Therefore, the use of these two maintenance methods by 6- and 8-year-olds was assessed using memory span tasks that varied in their opportunities for…

Comparison of drop size and velocity measurements by a laser precipitation meter and low-speed photography for an agriculture sprinkler

USDA-ARS?s Scientific Manuscript database

Kinetic energy of water droplets has a substantial effect on development of a soil surface seal and infiltration rate of bare soil. Methods for measuring sprinkler droplet size and velocity needed to calculate droplet kinetic energy have been developed and tested over the past 50 years, each with ad...

A method for examining the impacts of Oregon land use laws on forest lands and farmlands

Treesearch

David L. Azuma; Gary Lettman; Erica Hanson

2009-01-01

Over the past 8 years, the Pacific Northwest Research Station Forest Inventory and Analysis unit, in conjunction with the Oregon Department of Forestry, Oregon Department of Agriculture, and Oregon Department of Land Conservation and Development, has researched the effect of Oregon's land use laws on the conversion and development of land. The studies have used...

A Multi-Year Program Developing an Explicit Reflective Pedagogy for Teaching Pre-Service Teachers the Nature of Science by Ostention

ERIC Educational Resources Information Center

Smith, Mike U.; Scharmann, Lawrence

2008-01-01

This investigation delineates a multi-year action research agenda designed to develop an instructional model for teaching the nature of science (NOS) to preservice science teachers. Our past research strongly supports the use of explicit reflective instructional methods, which includes Thomas Kuhn's notion of learning by ostention and treating…

Characterizations of Rapid Sintered Nanosilver Joint for Attaching Power Chips

PubMed Central

Feng, Shuang-Tao; Mei, Yun-Hui; Chen, Gang; Li, Xin; Lu, Guo-Quan

2016-01-01

Sintering of nanosilver paste has been extensively studied as a lead-free die-attach solution for bonding semiconductor power chips, such as the power insulated gated bipolar transistor (IGBT). However, for the traditional method of bonding IGBT chips, an external pressure of a few MPa is reported necessary for the sintering time of ~1 h. In order to shorten the processing duration time, we developed a rapid way to sinter nanosilver paste for bonding IGBT chips in less than 5 min using pulsed current. In this way, we firstly dried as-printed paste at about 100 °C to get rid of many volatile solvents because they may result in defects or voids during the out-gassing from the paste. Then, the pre-dried paste was further heated by pulse current ranging from 1.2 kA to 2.4 kA for several seconds. The whole procedure was less than 3 min and did not require any gas protection. We could obtain robust sintered joint with shear strength of 30–35 MPa for bonding 1200-V, 25-A IGBT and superior thermal properties. Static and dynamic electrical performance of the as-bonded IGBT assemblies was also characterized to verify the feasibility of this rapid sintering method. The results indicate that the electrical performance is comparable or even partially better than that of commercial IGBT modules. The microstructure evolution of the rapid sintered joints was also studied by scanning electron microscopy (SEM). This work may benefit the wide usage of nanosilver paste for rapid bonding IGBT chips in the future. PMID:28773686

Characterizations of Rapid Sintered Nanosilver Joint for Attaching Power Chips.

PubMed

Feng, Shuang-Tao; Mei, Yun-Hui; Chen, Gang; Li, Xin; Lu, Guo-Quan

2016-07-12

Sintering of nanosilver paste has been extensively studied as a lead-free die-attach solution for bonding semiconductor power chips, such as the power insulated gated bipolar transistor (IGBT). However, for the traditional method of bonding IGBT chips, an external pressure of a few MPa is reported necessary for the sintering time of ~1 h. In order to shorten the processing duration time, we developed a rapid way to sinter nanosilver paste for bonding IGBT chips in less than 5 min using pulsed current. In this way, we firstly dried as-printed paste at about 100 °C to get rid of many volatile solvents because they may result in defects or voids during the out-gassing from the paste. Then, the pre-dried paste was further heated by pulse current ranging from 1.2 kA to 2.4 kA for several seconds. The whole procedure was less than 3 min and did not require any gas protection. We could obtain robust sintered joint with shear strength of 30-35 MPa for bonding 1200-V, 25-A IGBT and superior thermal properties. Static and dynamic electrical performance of the as-bonded IGBT assemblies was also characterized to verify the feasibility of this rapid sintering method. The results indicate that the electrical performance is comparable or even partially better than that of commercial IGBT modules. The microstructure evolution of the rapid sintered joints was also studied by scanning electron microscopy (SEM). This work may benefit the wide usage of nanosilver paste for rapid bonding IGBT chips in the future.

Finite element analysis (FEA) analysis of the preflex beam

NASA Astrophysics Data System (ADS)

Wan, Lijuan; Gao, Qilang

2017-10-01

The development of finite element analysis (FEA) has been relatively mature, and is one of the important means of structural analysis. This method changes the problem that the research of complex structure in the past needs to be done by a large number of experiments. Through the finite element method, the numerical simulation of the structure can be used to achieve a variety of static and dynamic simulation analysis of the mechanical problems, it is also convenient to study the parameters of the structural parameters. Combined with a certain number of experiments to verify the simulation model can be completed in the past all the needs of experimental research. The nonlinear finite element method is used to simulate the flexural behavior of the prestressed composite beams with corrugated steel webs. The finite element analysis is used to understand the mechanical properties of the structure under the action of bending load.

Native SAD is maturing

PubMed Central

Rose, John P.; Wang, Bi-Cheng; Weiss, Manfred S.

2015-01-01

Native SAD phasing uses the anomalous scattering signal of light atoms in the crystalline, native samples of macromolecules collected from single-wavelength X-ray diffraction experiments. These atoms include sodium, magnesium, phosphorus, sulfur, chlorine, potassium and calcium. Native SAD phasing is challenging and is critically dependent on the collection of accurate data. Over the past five years, advances in diffraction hardware, crystallographic software, data-collection methods and strategies, and the use of data statistics have been witnessed which allow ‘highly accurate data’ to be routinely collected. Today, native SAD sits on the verge of becoming a ‘first-choice’ method for both de novo and molecular-replacement structure determination. This article will focus on advances that have caught the attention of the community over the past five years. It will also highlight both de novo native SAD structures and recent structures that were key to methods development. PMID:26175902

Vibrational spectroscopy

Treesearch

Umesh P. Agarwal; Rajai Atalla

2010-01-01

Vibrational spectroscopy is an important tool in modern chemistry. In the past two decades, thanks to significant improvements in instrumentation and the development of new interpretive tools, it has become increasingly important for studies of lignin. This chapter presents the three important instrumental methods-Raman spectroscopy, infrared (IR) spectroscopy, and...

Development of acoustic emission evaluation method for repaired prestressed concrete bridge girders.

DOT National Transportation Integrated Search

2011-06-01

Acoustic emission (AE) monitoring has proven to be a useful nondestructive testing tool in ordinary reinforced concrete beams. Over the past decade, however, the technique has also been used to test other concrete structures. It has been seen that ac...

Montaigne's Uses of Classical Learning.

ERIC Educational Resources Information Center

Hall, Michael L.

1997-01-01

M. de Montaigne's essay "On the Education of Children" (1580) demonstrates the importance of examining classical authors to test understanding and develop judgment. Montaigne's method provides a way to study cultural heritage and to use the past to examine current issues. Implications for teaching today are discussed. (SLD)

DETECTION OF CRYPTOSPORIDIUM OOCYSTS IN SOURCE AND FINISHED WATERS

EPA Science Inventory

Numerous waterborne outbreaks of cryptosporidiosis have occurred with the most notable being the 1993 episode in Milwaukee. As a result, the past decade has seen a massive effort expended on the development of methods to detect Cryptosporidium parvum oocysts in source and finish...

Agro-ecoregionalization of Iowa using multivariate geographical clustering

Treesearch

Carol L. Williams; William W. Hargrove; Matt Leibman; David E. James

2008-01-01

Agro-ecoregionalization is categorization of landscapes for use in crop suitability analysis, strategic agroeconomic development, risk analysis, and other purposes. Past agro-ecoregionalizations have been subjective, expert opinion driven, crop specific, and unsuitable for statistical extrapolation. Use of quantitative analytical methods provides an opportunity for...

CHEMICAL MASS BALANCE MODEL: EPA-CMB8.2

EPA Science Inventory

The Chemical Mass Balance (CMB) method has been a popular approach for receptor modeling of ambient air pollutants for over two decades. For the past few years the U.S. Environmental Protection Agency's Office of Research and Development (ORD) and Office of Air Quality Plannin...

PLANT INCORPORATED PROTECTANT CROP MONITORING USING REMOTE SENSING

EPA Science Inventory

The extent of past and anticipated plantings of transgenic corn in the United States requires a new approach to monitor this important crop for the development of pest resistance. Remote sensing by aerial and/or satellite images may provide a method of identifying transgenic pest...

Lunar cement and lunar concrete

NASA Technical Reports Server (NTRS)

Lin, T. D.

1991-01-01

Results of a study to investigate methods of producing cements from lunar materials are presented. A chemical process and a differential volatilization process to enrich lime content in selected lunar materials were identified. One new cement made from lime and anorthite developed compressive strengths of 39 Mpa (5500 psi) for 1 inch paste cubes. The second, a hypothetical composition based on differential volatilization of basalt, formed a mineral glass which was activated with an alkaline additive. The 1 inch paste cubes, cured at 100C and 100 percent humidity, developed compressive strengths in excess of 49 Mpa (7100 psi). Also discussed are tests made with Apollo 16 lunar soil and an ongoing investigation of a proposed dry mix/steam injection procedure for casting concrete on the Moon.

Methods for studying the zebrafish brain: past, present and future.

PubMed

Wyatt, Cameron; Bartoszek, Ewelina M; Yaksi, Emre

2015-07-01

The zebrafish (Danio rerio) is one of the most promising new model organisms. The increasing popularity of this amazing small vertebrate is evident from the exponentially growing numbers of research articles, funded projects and new discoveries associated with the use of zebrafish for studying development, brain function, human diseases and screening for new drugs. Thanks to the development of novel technologies, the range of zebrafish research is constantly expanding with new tools synergistically enhancing traditional techniques. In this review we will highlight the past and present techniques which have made, and continue to make, zebrafish an attractive model organism for various fields of biology, with a specific focus on neuroscience. © 2015 Federation of European Neuroscience Societies and John Wiley & Sons Ltd.

Present and future molecular testing of lung carcinoma.

PubMed

Dacic, Sanja; Nikiforova, Marina N

2014-03-01

The rapid development of targeted therapies has tremendously changed clinical management of lung carcinoma patients and set the stage for similar developments in other tumor types. Many studies have been published in the past decade in search for the most acceptable method of assessment for predictors of response to targeted therapies in lung cancer. As a result, several guidelines for molecular testing have been published in a past couple of years. Because of accumulated evidence that targetable drugs show the best efficacy and improved progression survival rates in lung cancer patients whose tumors have a specific genotype, molecular testing for predictors of therapy response has became standard of care. Presently, testing for EGFR mutations and ALK rearrangements in lung adenocarcinoma has been standardized. The landscape of targetable genomic alterations in lung carcinoma is expanding, but none of other potentially targetable biomarkers have been standardized outside of clinical trials. This review will summarize current practice of molecular testing. Future methods in molecular testing of lung carcinoma will be briefly reviewed.

Epidemiology of infectious diseases transmitted by drinking water in developed countries.

PubMed

Hartemann, P; Newman, R; Foliguet, J M

1986-01-01

Research on the epidemiology of infectious diseases attributable to drinking water, common in the US during the past 20 years at least, is not yet really widespread in France. The role played by water in the transmission of certain infectious agents was important in European countries during past centuries but at present the incidence of waterborne diseases can be considered as very low. The absence of well-established data is due to the difficulty in reporting correctly a few minor outbreaks in a situation of very low endemicity. After a survey of the reported outbreaks, this paper deals with risk assessment of waterborne diseases in developed countries as well as special problems linked with proving transmission via water and with the nature of the infectious agents, and the development of monitoring methods for increasing our knowledge of this epidemiology.

Quantifying the relative contributions of lexical and phonological factors to regular past tense accuracy

PubMed Central

Owen Van Horne, Amanda J.; Green Fager, Melanie

2015-01-01

Purpose Children with specific language impairment (SLI) frequently have difficulty producing the past tense. This study aimed to quantify the relative influence of telicity (i.e., the completedness of an event), verb frequency, and stem final phonemes on the production of past tense by school-age children with SLI and their typically-developing (TD) peers. Method Archival elicited production data from children with SLI between the ages of 6 and 9 and TD peers ages 4 to 8 were reanalyzed. Past tense accuracy was predicted using measures of telicity, verb frequency measures, and properties of the final consonant of the verb stem. Result All children were highly accurate when verbs were telic, the inflected form was frequently heard in the past tense, and the word ended in a sonorant/ non-alveolar consonant. All children were less accurate when verbs were atelic, rarely heard in the past tense, or ended in a word final obstruent or alveolar consonant. SLI status depressed overall accuracy rates, but did not influence how facilitative a given factor was. Conclusion Some factors that have been believed to be useful only when children are first discovering past tense, such as telicity, appear to be influential in later years as well. PMID:25879455

Development of Novel Potentiometric Sensors for Determination of Lidocaine Hydrochloride in Pharmaceutical Preparations, Serum and Urine Samples

PubMed Central

Ali, Tamer Awad; Mohamed, Gehad Genidy; Yahya, Ghada A.

2017-01-01

This article is focused on the determination of lidocaine hydrochloride as a local anaesthetic drug. A potentiometric method based on modified screen-printed and modified carbon paste ion-selective electrodes was described for the determination of lidocaine hydrochloride in different pharmaceutical preparations and biological fluids (urine and serum). It was based on potentiometric titration of lidocaine hydrochloride using modified screen-printed and carbon paste electrodes as end point indicator sensors. The influences of the paste composition, different conditioning parameters and foreign ions on the electrodes performance were investigated and response times of the electrodes were studied. The electrodes showed Nernstian response of 58.9 and 57.5 mV decade-1 in the concentration range of 1×10-7–1×10-2 and 6.2×10-7–1×10-2 mol L-1 for modified screen-printed and carbon paste electrodes, respectively. The electrodes were found to be usable within the pH range of 2.0–8.0 and 2.0-7.5, exhibited a fast response time (about 6 and 4) low detection limit (1×10-7 and 6.2×10-7 mol L-1), long lifetime (6 and 4 months) and good stability for modified screen-printed (Electrode VII) and carbon paste electrodes (Electrode III), respectively. The electrodes were successfully applied for the determination of lidocaine hydrochloride in pure solutions, pharmaceutical preparation and biological fluids (urine and serum) samples. The results obtained applying these potentiometric electrodes were comparable with British pharmacopeia. The method validation parameters were optimized and the method can be applied for routine analysis of lidocaine hydrochloride drug. PMID:28979305

Development of Novel Potentiometric Sensors for Determination of Lidocaine Hydrochloride in Pharmaceutical Preparations, Serum and Urine Samples.

PubMed

Ali, Tamer Awad; Mohamed, Gehad Genidy; Yahya, Ghada A

2017-01-01

This article is focused on the determination of lidocaine hydrochloride as a local anaesthetic drug. A potentiometric method based on modified screen-printed and modified carbon paste ion-selective electrodes was described for the determination of lidocaine hydrochloride in different pharmaceutical preparations and biological fluids (urine and serum). It was based on potentiometric titration of lidocaine hydrochloride using modified screen-printed and carbon paste electrodes as end point indicator sensors. The influences of the paste composition, different conditioning parameters and foreign ions on the electrodes performance were investigated and response times of the electrodes were studied. The electrodes showed Nernstian response of 58.9 and 57.5 mV decade -1 in the concentration range of 1×10 -7 -1×10 -2 and 6.2×10 -7 -1×10 -2 mol L -1 for modified screen-printed and carbon paste electrodes, respectively. The electrodes were found to be usable within the pH range of 2.0-8.0 and 2.0-7.5, exhibited a fast response time (about 6 and 4) low detection limit (1×10 -7 and 6.2×10 -7 mol L -1 ), long lifetime (6 and 4 months) and good stability for modified screen-printed (Electrode VII) and carbon paste electrodes (Electrode III), respectively. The electrodes were successfully applied for the determination of lidocaine hydrochloride in pure solutions, pharmaceutical preparation and biological fluids (urine and serum) samples. The results obtained applying these potentiometric electrodes were comparable with British pharmacopeia. The method validation parameters were optimized and the method can be applied for routine analysis of lidocaine hydrochloride drug.

Predictive Mechanical Characterization of Macro-Molecular Material Chemistry Structures of Cement Paste at Nano Scale - Two-phase Macro-Molecular Structures of Calcium Silicate Hydrate, Tri-Calcium Silicate, Di-Calcium Silicate and Calcium Hydroxide

NASA Astrophysics Data System (ADS)

Padilla Espinosa, Ingrid Marcela

Concrete is a hierarchical composite material with a random structure over a wide range of length scales. At submicron length scale the main component of concrete is cement paste, formed by the reaction of Portland cement clinkers and water. Cement paste acts as a binding matrix for the other components and is responsible for the strength of concrete. Cement paste microstructure contains voids, hydrated and unhydrated cement phases. The main crystalline phases of unhydrated cement are tri-calcium silicate (C3S) and di-calcium silicate (C2S), and of hydrated cement are calcium silicate hydrate (CSH) and calcium hydroxide (CH). Although efforts have been made to comprehend the chemical and physical nature of cement paste, studies at molecular level have primarily been focused on individual components. Present research focuses on the development of a method to model, at molecular level, and analysis of the two-phase combination of hydrated and unhydrated phases of cement paste as macromolecular systems. Computational molecular modeling could help in understanding the influence of the phase interactions on the material properties, and mechanical performance of cement paste. Present work also strives to create a framework for molecular level models suitable for potential better comparisons with low length scale experimental methods, in which the sizes of the samples involve the mixture of different hydrated and unhydrated crystalline phases of cement paste. Two approaches based on two-phase cement paste macromolecular structures, one involving admixed molecular phases, and the second involving cluster of two molecular phases are investigated. The mechanical properties of two-phase macromolecular systems of cement paste consisting of key hydrated phase CSH and unhydrated phases C3S or C2S, as well as CSH with the second hydrated phase CH were calculated. It was found that these cement paste two-phase macromolecular systems predicted an isotropic material behavior. Also, these systems exhibited a high bulk modulus, compared to the elastic modulus. These results are an indication and concur with the high compression strength of cement paste seen at engineering length scale. In addition, the bulk modulus of two-phase systems consisting of hydrated CSH and unhydrated C3S or C2S was found to increase with higher levels of unhydrated components. The interaction energies of two-phase cement paste molecular structures studied in the present work were calculated, showing that a higher interaction is attained when the two phases are admixed as small components instead of cluster of phases. Finally, the mechanical behavior under shear deformation was predicted by using a quasi-static deformation method and analyzed for a representative two-phase (CSH and C2S) macromolecular structure of cement paste.

A novel fast ion chromatographic method for the analysis of fluoride in Antarctic snow and ice.

PubMed

Severi, Mirko; Becagli, Silvia; Frosini, Daniele; Marconi, Miriam; Traversi, Rita; Udisti, Roberto

2014-01-01

Ice cores are widely used to reconstruct past changes of the climate system. For instance, the ice core record of numerous water-soluble and insoluble chemical species that are trapped in snow and ice offer the possibility to investigate past changes of various key compounds present in the atmosphere (i.e., aerosol, reactive gases). We developed a new method for the quantitative determination of fluoride in ice cores at sub-μg L(-1) levels by coupling a flow injection analysis technique with a fast ion chromatography separation based on the "heart cut" column switching technology. Sensitivity, linear range (up to 60 μg L(-1)), reproducibility, and detection limit (0.02 μg L(-1)) were evaluated for the new method. This method was successfully applied to the analysis of fluoride at trace levels in more than 450 recent snow samples collected during the 1998-1999 International Trans-Antarctica Scientific Expedition traverse in East Antarctica at sites located between 170 and 850 km from the coastline.

Research Trends in Evidence-Based Medicine: A Joinpoint Regression Analysis of More than 50 Years of Publication Data

PubMed Central

Hung, Bui The; Long, Nguyen Phuoc; Hung, Le Phi; Luan, Nguyen Thien; Anh, Nguyen Hoang; Nghi, Tran Diem; Van Hieu, Mai; Trang, Nguyen Thi Huyen; Rafidinarivo, Herizo Fabien; Anh, Nguyen Ky; Hawkes, David; Huy, Nguyen Tien; Hirayama, Kenji

2015-01-01

Background Evidence-based medicine (EBM) has developed as the dominant paradigm of assessment of evidence that is used in clinical practice. Since its development, EBM has been applied to integrate the best available research into diagnosis and treatment with the purpose of improving patient care. In the EBM era, a hierarchy of evidence has been proposed, including various types of research methods, such as meta-analysis (MA), systematic review (SRV), randomized controlled trial (RCT), case report (CR), practice guideline (PGL), and so on. Although there are numerous studies examining the impact and importance of specific cases of EBM in clinical practice, there is a lack of research quantitatively measuring publication trends in the growth and development of EBM. Therefore, a bibliometric analysis was constructed to determine the scientific productivity of EBM research over decades. Methods NCBI PubMed database was used to search, retrieve and classify publications according to research method and year of publication. Joinpoint regression analysis was undertaken to analyze trends in research productivity and the prevalence of individual research methods. Findings Analysis indicates that MA and SRV, which are classified as the highest ranking of evidence in the EBM, accounted for a relatively small but auspicious number of publications. For most research methods, the annual percent change (APC) indicates a consistent increase in publication frequency. MA, SRV and RCT show the highest rate of publication growth in the past twenty years. Only controlled clinical trials (CCT) shows a non-significant reduction in publications over the past ten years. Conclusions Higher quality research methods, such as MA, SRV and RCT, are showing continuous publication growth, which suggests an acknowledgement of the value of these methods. This study provides the first quantitative assessment of research method publication trends in EBM. PMID:25849641

Genetics-based methods for detection of Salmonella spp. in foods.

PubMed

Mozola, Mark A

2006-01-01

Genetic methods are now at the forefront of foodborne pathogen testing. The sensitivity, specificity, and inclusivity advantages offered by deoxyribonucleic acid (DNA) probe technology have driven an intense effort in methods development over the past 20 years. DNA probe-based methods for Salmonella spp. and other pathogens have progressed from time-consuming procedures involving the use of radioisotopes to simple, high throughput, automated assays. The analytical sensitivity of nucleic acid amplification technology has facilitated a reduction in analysis time by allowing enriched samples to be tested for previously undetectable quantities of analyte. This article will trace the evolution of the development of genetic methods for detection of Salmonella in foods, review the basic assay formats and their advantages and limitations, and discuss method performance characteristics and considerations for selection of methods.

We can be heroes: MLA’s leadership journey(s)*

PubMed Central

Tooey, Mary Joan (M.J.)

2017-01-01

Objective Are there key attributes of leaders? Extrovert versus introvert? Charismatic? Detail oriented? Visionary? How do past leaders of the Medical Library Association (MLA) stack up? What leadership skills will MLA’s leaders need in a complex information future? Leadership attributes of MLA’s past and current presidents were studied to determine the common characteristics shared among these leaders. An examination of the leadership literature identified critical leadership characteristics essential to successful future leaders. MLA’s past, current, and future leadership development efforts were examined. Finally, all members were encouraged to consider leadership with a small “l” and become leaders based on their own strengths, interests, and environments. Methods A text analysis was performed on past presidential profiles, the past twenty-five years of MLA presidents were surveyed, and conversations with MLA’s current presidents were held to determine commonalities among leadership characteristics. These were compared and contrasted with characteristics in the current leadership literature regarding the qualities of future leaders. Results The text analysis of past presidential profiles was not particularly revelatory regarding leadership qualities of early MLA presidents although several generalized traits emerged including collaborative traits; management traits such as effectiveness and efficiency, innovation, and vision; personal traits such as humor and energy; and finally, a passion for the work were revealed. These aligned with traits identified in the survey of the past twenty-five years of MLA presidents and with the thoughts of the president-elect, president, and past president. Additional qualities identified were communication skills, political acumen, creativity, courage, and respect for the opinions and concerns of all members. MLA’s current leadership programs were reviewed in the context of examining traits needed by leaders of the future. A lack of focus on the needs of middle managers and the development of individual leadership skills was identified. Conclusions As an organization, MLA should focus on leadership development in contrast to management training to prepare members as leaders in careers and work that may be vastly different than current situations. Equipping members with the skills enabling them to lead and thrive in these diverse situations, whether as the heads of programs or middle managers, or exploring and empowering individual leadership development while maintaining a passion for the profession, will be essential. PMID:28096752

Analysis of high-incidence separated flow past airfoils

NASA Technical Reports Server (NTRS)

Chia, K. N.; Osswald, G. A.; Chia, U.

1989-01-01

An unsteady Navier-Stokes (NS) analysis is developed and used to carefully examine high-incidence aerodynamic separated flows past airfoils. Clustered conformal C-grids are employed for the 12 percent thick symmetric Joukowski airfoil as well as for the NACA 0012 airfoil with a sharp trailing edge. The clustering is controlled by appropriate one-dimensional stretching transformations. An attempt is made to resolve many of the dominant scales of an unsteady flow with massive separation, while maintaining the transformation metrics to be smooth and continuous in the entire flow field. A fully implicit time-marching alternating-direction implicit-block Gaussian elimination (ADI-BGE) method is employed, in which no use is made of any explicit artificial dissipation. Detailed results are obtained for massively separated, unsteady flow past symmetric Joukowski and NACA 0012 airfoils.

Flow of nanofluid past a Riga plate

NASA Astrophysics Data System (ADS)

Ahmad, Adeel; Asghar, Saleem; Afzal, Sumaira

2016-03-01

This paper studies the mixed convection boundary layer flow of a nanofluid past a vertical Riga plate in the presence of strong suction. The mathematical model incorporates the Brownian motion and thermophoresis effects due to nanofluid and the Grinberg-term for the wall parallel Lorentz force due to Riga plate. The analytical solution of the problem is presented using the perturbation method for small Brownian and thermophoresis diffusion parameters. The numerical solution is also presented to ensure the reliability of the asymptotic method. The comparison of the two solutions shows an excellent agreement. The correlation expressions for skin friction, Nusselt number and Sherwood number are developed by performing linear regression on the obtained numerical data. The effects of nanofluid and the Lorentz force due to Riga plate, on the skin friction are discussed.

Improved product energy intensity benchmarking metrics for thermally concentrated food products.

PubMed

Walker, Michael E; Arnold, Craig S; Lettieri, David J; Hutchins, Margot J; Masanet, Eric

2014-10-21

Product energy intensity (PEI) metrics allow industry and policymakers to quantify manufacturing energy requirements on a product-output basis. However, complexities can arise for benchmarking of thermally concentrated products, particularly in the food processing industry, due to differences in outlet composition, feed material composition, and processing technology. This study analyzes tomato paste as a typical, high-volume concentrated product using a thermodynamics-based model. Results show that PEI for tomato pastes and purees varies from 1200 to 9700 kJ/kg over the range of 8%-40% outlet solids concentration for a 3-effect evaporator, and 980-7000 kJ/kg for a 5-effect evaporator. Further, the PEI for producing paste at 31% outlet solids concentration in a 3-effect evaporator varies from 13,000 kJ/kg at 3% feed solids concentration to 5900 kJ/kg at 6%; for a 5-effect evaporator, the variation is from 9200 kJ/kg at 3%, to 4300 kJ/kg at 6%. Methods to compare the PEI of different product concentrations on a standard basis are evaluated. This paper also presents methods to develop PEI benchmark values for multiple plants. These results focus on the case of a tomato paste processing facility, but can be extended to other products and industries that utilize thermal concentration.

Characteristics of Chemical and Functional Properties of Modified Cassava Flour (Manihot esculenta) by Autoclaving-Cooling Cycles Method

NASA Astrophysics Data System (ADS)

Cecep Erwan Andriansyah, Raden; Rahman, Taufik; Herminiati, Ainia; Rahman, Nurhaidar; Luthfiyanti, Rohmah

2017-12-01

The modified cassava flour can be made using the method of the autoclaving cooling cycle (AAC). The stability of the warming can be seen from the decreasing value of breakdown viscosity, while the stability of the stirring process can be seen by the decreasing value of setback viscosity. The stages of research include: (1) the making of cassava flour, (2) the making of modified cassava flour by the method of treatment of ACC with a variety of flour concentration and autoclaving time, (3) chemical analysis of the moisture, ash, fat, protein, carbohydrate; The functional properties of the pasting characteristics to the initial temperature of the pasting, peak viscosity, hot paste viscosity, breakdown viscosity, cold paste viscosity and setback viscosity. The result shows that cassava flour modified by treatment of flour concentration 16% and autoclaving time 41 minutes having pasting code and pasting viscosity which is resistant to high temperature. Flour with this character is flour that is expected to maintain the texture of processed products with a paste form that remains stable. Utilization of modified cassava flour by the ACC method can be applied to the pasting product such as noodle and spaghetti, hoping to support for food diversification program to reduce dependence on wheat flour in Indonesia.

Wind energy developments in the 20th century

NASA Technical Reports Server (NTRS)

Vargo, D. J.

1974-01-01

Wind turbine systems of the past are reviewed and wind energy is reexamined as a future source of power. Various phases and objectives of the Wind Energy Program are discussed. Conclusions indicate that wind generated energy must be considered economically competitive with other power production methods.

Methodology in Bi- and Multilingual Studies: From Simplification to Complexity

ERIC Educational Resources Information Center

Aronin, Larissa; Jessner, Ulrike

2014-01-01

Research methodology is determined by theoretical approaches. This article discusses methods of multilingualism research in connection with theoretical developments in linguistics, psycholinguistics, sociolinguistics, and education. Taking a brief glance at the past, the article starts with a discussion of an issue underlying the choice of…

Line-scan hyperspectral imaging techniques for food and agricultural applications

USDA-ARS?s Scientific Manuscript database

Hyperspectral imaging technologies in the food and agricultural area have been evolved rapidly during the past 15 years owing to tremendous interest from both academic and industrial fields. Line-scan hyperspectral imaging is a major method that has been intensively researched and developed in diffe...

Effects of protection forests on rockfall risks: implementation in the Swiss risk concept

NASA Astrophysics Data System (ADS)

Trappmann, Daniel; Moos, Christine; Fehlmann, Michael; Ernst, Jacqueline; Sandri, Arthur; Dorren, Luuk; Stoffel, Markus

2016-04-01

Forests growing on slopes below active rockfall cliffs can provide effective protection for human lives and infrastructures. The risk-based approach for natural hazards in Switzerland shall take such biological measures just like existing technical protective measures into account, provided that certain criteria regarding condition, maintenance and durability are met. This contribution describes a project in which we are investigating how the effects of protection forests can be considered in rockfall risk analyses in an appropriate way. In principle, protection forests reduce rockfall risks in three different ways: (i) reduction of the event magnitude (energy) due to collisions with tree stems; (ii) reduction of frequency of occurrence of a given scenario (block volume arriving at the damage potential); (iii) reduction of spatial probability of occurrence (spread and runout) of a given scenario in case of multiple fragments during one event. The aim of this work is to develop methods for adequately implementing these three effects of rockfall protection forests in risk calculations. To achieve this, we use rockfall simulations taking collisions with trees into account and detailed field validation. On five test sites, detailed knowledge on past rockfall activity is gathered by combining investigations of impacted trees, analysis of documented historical events, and deposits in the field. Based on this empirical data on past rockfalls, a methodology is developed that allows transferring real past rockfall activity to simulation results obtained with the three-dimensional, process-based model Rockyfor3D. Different ways of quantifying the protective role of forests will be considered by comparing simulation results with and without forest cover. Combining these different research approaches, systematic considerations shall lead to the development of methods for adequate inclusion of the protective effects of forests in risk calculations. The applicability of the developed methods will be tested on the case study slopes in order to ensure practical applicability to a broad range of rockfall situations on forested slopes.

In situ methods for Li-ion battery research: A review of recent developments

NASA Astrophysics Data System (ADS)

Harks, P. P. R. M. L.; Mulder, F. M.; Notten, P. H. L.

2015-08-01

A considerable amount of research is being directed towards improving lithium-ion batteries in order to meet today's market demands. In particular in situ investigations of Li-ion batteries have proven extremely insightful, but require the electrochemical cell to be fully compatible with the conditions of the testing method and are therefore often challenging to execute. Advantageously, in the past few years significant progress has been made with new, more advanced, in situ techniques. Herein, a comprehensive overview of in situ methods for studying Li-ion batteries is given, with the emphasis on new developments and reported experimental highlights.

Empirical Distributional Semantics: Methods and Biomedical Applications

PubMed Central

Cohen, Trevor; Widdows, Dominic

2009-01-01

Over the past fifteen years, a range of methods have been developed that are able to learn human-like estimates of the semantic relatedness between terms from the way in which these terms are distributed in a corpus of unannotated natural language text. These methods have also been evaluated in a number of applications in the cognitive science, computational linguistics and the information retrieval literatures. In this paper, we review the available methodologies for derivation of semantic relatedness from free text, as well as their evaluation in a variety of biomedical and other applications. Recent methodological developments, and their applicability to several existing applications are also discussed. PMID:19232399

Computer-assisted techniques to evaluate fringe patterns

NASA Astrophysics Data System (ADS)

Sciammarella, Cesar A.; Bhat, Gopalakrishna K.

1992-01-01

Strain measurement using interferometry requires an efficient way to extract the desired information from interferometric fringes. Availability of digital image processing systems makes it possible to use digital techniques for the analysis of fringes. In the past, there have been several developments in the area of one dimensional and two dimensional fringe analysis techniques, including the carrier fringe method (spatial heterodyning) and the phase stepping (quasi-heterodyning) technique. This paper presents some new developments in the area of two dimensional fringe analysis, including a phase stepping technique supplemented by the carrier fringe method and a two dimensional Fourier transform method to obtain the strain directly from the discontinuous phase contour map.

Integrating Stealth

DTIC Science & Technology

2015-12-01

Over the past two decades the United States has revolutionized the war fighting industry with advancements in Low Observable ( LO ) technology and...precision strike capability. Advanced LO weapon systems such as the F-35, F-22 and the B-2 have been developed and portrayed as stealth aircraft. In...Because LO technology is in a physical form, methods can and have been developed to exploit the inherent weaknesses. Additionally, the technological

On the Development and Use of Large Chemical Similarity Networks, Informatics Best Practices and Novel Chemical Descriptors towards Materials Quantitative Structure Property Relationships

ERIC Educational Resources Information Center

Krein, Michael

2011-01-01

After decades of development and use in a variety of application areas, Quantitative Structure Property Relationships (QSPRs) and related descriptor-based statistical learning methods have achieved a level of infamy due to their misuse. The field is rife with past examples of overtrained models, overoptimistic performance assessment, and outright…

Mapping debris-flow hazard in Honolulu using a DEM

USGS Publications Warehouse

Ellen, Stephen D.; Mark, Robert K.; ,

1993-01-01

A method for mapping hazard posed by debris flows has been developed and applied to an area near Honolulu, Hawaii. The method uses studies of past debris flows to characterize sites of initiation, volume at initiation, and volume-change behavior during flow. Digital simulations of debris flows based on these characteristics are then routed through a digital elevation model (DEM) to estimate degree of hazard over the area.

The Development of Accepted Performance Items to Demonstrate Braille Competence in the Nemeth Code for Mathematics and Science Notation

ERIC Educational Resources Information Center

Smith, Derrick; Rosenblum, L. Penny

2013-01-01

Introduction: The purpose of the study presented here was the initial validation of a comprehensive set of competencies focused solely on the Nemeth code. Methods: Using the Delphi method, 20 expert panelists were recruited to participate in the study on the basis of their past experience in teaching a university-level course in the Nemeth code.…

Disease Modeling via Large-Scale Network Analysis

DTIC Science & Technology

2015-05-20

SECURITY CLASSIFICATION OF: A central goal of genetics is to learn how the genotype of an organism determines its phenotype. We address the implicit...guarantees for the methods. In the past, we have developed predictive methods general enough to apply to potentially any genetic trait, varying from... genetics is to learn how the genotype of an organism determines its phenotype. We address the implicit problem of predicting the association of genes with

Isotope archaeology: reading the past in metals, minerals, and bone.

PubMed

Stos-Gale, Z A

1992-01-01

The latest edition of the Oxford Dictionary (1989) defines archaeology as '... the scientific study of the remains and monuments of the prehistoric period'. It is not surprising, therefore, that modern archaeology draws as much as possible on scientific methods of investigation developed in other fields. In the last ten years the powerful method of quantitative isotope analysis has brought a new dimension to the examination of archaeological finds.

Unstructured Cartesian refinement with sharp interface immersed boundary method for 3D unsteady incompressible flows

NASA Astrophysics Data System (ADS)

Angelidis, Dionysios; Chawdhary, Saurabh; Sotiropoulos, Fotis

2016-11-01

A novel numerical method is developed for solving the 3D, unsteady, incompressible Navier-Stokes equations on locally refined fully unstructured Cartesian grids in domains with arbitrarily complex immersed boundaries. Owing to the utilization of the fractional step method on an unstructured Cartesian hybrid staggered/non-staggered grid layout, flux mismatch and pressure discontinuity issues are avoided and the divergence free constraint is inherently satisfied to machine zero. Auxiliary/hanging nodes are used to facilitate the discretization of the governing equations. The second-order accuracy of the solver is ensured by using multi-dimension Lagrange interpolation operators and appropriate differencing schemes at the interface of regions with different levels of refinement. The sharp interface immersed boundary method is augmented with local near-boundary refinement to handle arbitrarily complex boundaries. The discrete momentum equation is solved with the matrix free Newton-Krylov method and the Krylov-subspace method is employed to solve the Poisson equation. The second-order accuracy of the proposed method on unstructured Cartesian grids is demonstrated by solving the Poisson equation with a known analytical solution. A number of three-dimensional laminar flow simulations of increasing complexity illustrate the ability of the method to handle flows across a range of Reynolds numbers and flow regimes. Laminar steady and unsteady flows past a sphere and the oblique vortex shedding from a circular cylinder mounted between two end walls demonstrate the accuracy, the efficiency and the smooth transition of scales and coherent structures across refinement levels. Large-eddy simulation (LES) past a miniature wind turbine rotor, parameterized using the actuator line approach, indicates the ability of the fully unstructured solver to simulate complex turbulent flows. Finally, a geometry resolving LES of turbulent flow past a complete hydrokinetic turbine illustrates the potential of the method to simulate turbulent flows past geometrically complex bodies on locally refined meshes. In all the cases, the results are found to be in very good agreement with published data and savings in computational resources are achieved.

Physical and Electrical Properties of SiO2 Layer Synthesized by Eco-Friendly Method

NASA Astrophysics Data System (ADS)

Jong-Woong Kim,; Young-Seok Kim,; Sung-Jei Hong,; Tae-Hwan Hong,; Jeong-In Han,

2010-05-01

SiO2 thin film has a wide range of applications, including insulation layers in microelectronic devices, such as semiconductors and flat panel displays, due to its advantageous characteristics. Herein, we developed a new eco-friendly method for manufacturing SiO2 nanoparticles and, thereby, SiO2 paste to be used in the digital printing process for the fabrication of SiO2 film. By excluding harmful Cl- and NO3- elements from the SiO2 nanoparticle synthetic process, we were able to lower the heat treatment temperature for the SiO2 precursor from 600 to 300 °C and the diameter of the final SiO2 nanoparticles to about 14 nm. The synthesized SiO2 nanoparticles were dispersed in an organic solvent with additives to make a SiO2 paste for feasibility testing. The SiO2 paste was printed onto a glass substrate to test the feasibility of using it for digital printing. The insulation resistance of the printed film was high enough for it to be used as an insulation layer for passivation.

Nonparametric and Semiparametric Regression Estimation for Length-biased Survival Data

PubMed Central

Shen, Yu; Ning, Jing; Qin, Jing

2016-01-01

For the past several decades, nonparametric and semiparametric modeling for conventional right-censored survival data has been investigated intensively under a noninformative censoring mechanism. However, these methods may not be applicable for analyzing right-censored survival data that arise from prevalent cohorts when the failure times are subject to length-biased sampling. This review article is intended to provide a summary of some newly developed methods as well as established methods for analyzing length-biased data. PMID:27086362

Ergonomics and sustainable development in the past two decades (1992-2011): Research trends and how ergonomics can contribute to sustainable development.

PubMed

Radjiyev, Ayubkhon; Qiu, Hai; Xiong, Shuping; Nam, KyungHyun

2015-01-01

The need for sustainable development has been widely recognized and sustainable development has become a hot topic of various disciplines even though the role of ergonomics in it is seldom reported or considered. This study conducts a systematic survey of research publications in the fields of ergonomics and sustainable development over the past two decades (1992-2011), in order to identify their research trends and convergent areas where ergonomics can play an important role in sustainable development. The results show that 'methods and techniques', 'human characteristics', 'work design and organization', 'health and safety' and 'workplace and equipment design' are the top five frequently researched areas in ergonomics. Ergonomics has an opportunity to contribute its knowledge especially to 'industrial and product design', 'architecture', 'health and safety' and 'HCI' (especially for energy reduction issues) categories of sustainable development. Typical methodologies and general guidance on how to contribute the expertise of ergonomist to sustainable development are also discussed. Copyright © 2014 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Estimating past precipitation and temperature from fossil ostracodes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, A.J.; Forester, R.M.

1994-12-31

The fossil records of certain aquatic organisms provide a way of obtaining meaningful estimates of past temperature and precipitation. These estimates of past environmental conditions are derived from multivariate statistical methods that are in turn based on the modern biogeographic distributions and environmental tolerances of the biota of interest. These estimates are helpful in conducting slimate studies as part of the Yucca Mountain site characterization. Ostracodes are microscopic crustaceans that produce bivalved calcite shells which are easily fossilized in the sediments of the lakes and wetlands in which the animals lived. The modern biogeographic distribution and environmental conditions of livingmore » ostracodes are the basis for the interpretation of the past environmental conditions of the fossil ostracodes. The major assumption in this method of interpretation is that the environmental tolerances of ostracodes have not changed substantially over thousands of years. Two methods using these modern analogs to determine past environmental conditions are the modern analog method and the range method. The range method also considers the information provided by fossil ostracode assemblages that have no modern analog in today`s world.« less

The impact of heterogeneity in individual frailty on the dynamics of mortality.

PubMed

Vaupel, J W; Manton, K G; Stallard, E

1979-08-01

Life table methods are developed for populations whose members differ in their endowment for longevity. Unlike standard methods, which ignore such heterogeneity, these methods use different calculations to construct cohort, period, and individual life tables. The results imply that standard methods overestimate current life expectancy and potential gains in life expectancy from health and safety interventions, while underestimating rates of individual aging, past progress in reducing mortality, and mortality differentials between pairs of populations. Calculations based on Swedish mortality data suggest that these errors may be important, especially in old age.

Comparison of methods for estimating flood magnitudes on small streams in Georgia

USGS Publications Warehouse

Hess, Glen W.; Price, McGlone

1989-01-01

The U.S. Geological Survey has collected flood data for small, natural streams at many sites throughout Georgia during the past 20 years. Flood-frequency relations were developed for these data using four methods: (1) observed (log-Pearson Type III analysis) data, (2) rainfall-runoff model, (3) regional regression equations, and (4) map-model combination. The results of the latter three methods were compared to the analyses of the observed data in order to quantify the differences in the methods and determine if the differences are statistically significant.

Power Quality Improvement Utilizing Photovoltaic Generation Connected to a Weak Grid

DOE Office of Scientific and Technical Information (OSTI.GOV)

Muljadi, Eduard; Tumbelaka, Hanny H.; Gao, Wenzhong

Microgrid research and development in the past decades have been one of the most popular topics. Similarly, the photovoltaic generation has been surging among renewable generation in the past few years, thanks to the availability, affordability, technology maturity of the PV panels and the PV inverter in the general market. Unfortunately, quite often, the PV installations are connected to weak grids and may have been considered as the culprit of poor power quality affecting other loads in particular sensitive loads connected to the same point of common coupling (PCC). This paper is intended to demystify the renewable generation, and turnsmore » the negative perception into positive revelation of the superiority of PV generation to the power quality improvement in a microgrid system. The main objective of this work is to develop a control method for the PV inverter so that the power quality at the PCC will be improved under various disturbances. The method is to control the reactive current based on utilizing the grid current to counteract the negative impact of the disturbances. The proposed control method is verified in PSIM platform. Promising results have been obtained.« less

Nanosensors and nanomaterials for monitoring glucose in diabetes

PubMed Central

Cash, Kevin J.; Clark, Heather A.

2010-01-01

Worldwide, diabetes is a rapidly growing problem that is managed at the individual level by monitoring and controlling blood glucose levels to minimize the negative effects of the disease. Because of limitations in diagnostic methods, significant research efforts are focused on developing improved methods to measure glucose. Nanotechnology has impacted these efforts by increasing the surface area of sensors, improving the catalytic properties of electrodes and providing nanoscale sensors. Herein, we discuss developments in the past several years on both nanosensors that directly measure glucose as well as nanomaterials that improve glucose sensor function. Finally, we discuss challenges that must be overcome to apply these developments in the clinic. PMID:20869318

Preliminary analysis of the JAPE ground vehicle test data with an artificial neural network classifier

NASA Technical Reports Server (NTRS)

Larsen, Nathan F.; Carnes, Ben L.

1993-01-01

Remotely sensing and classifying military vehicles in a battlefield environment have been the source of much research over the past 20 years. The ability to know where threat vehicles are located is an obvious advantage to military personnel. In the past active methods of ground vehicle detection such as radar have been used, but with the advancement of technology to locate these active sensors, passive sensors are preferred. Passive sensors detect acoustic emissions, seismic movement, electromagnetic radiation, etc., produced by the target and use this information to describe it. Deriving the mathematical models to classify vehicles in this manner has been, and is, quite complex and not always reliable. However, with the resurgence of artificial neural network (ANN) research in the past few years, developing models for this work may be a thing of the past. Preliminary results from an ANN analysis to the tank signatures recorded at the Joint Acoustic Propagation Experiment (JAPE) at the US Army White Sands Missile Range, NM, in July 1991, are presented.

Effect of paste processing on residue levels of imidacloprid, pyraclostrobin, azoxystrobin and fipronil in winter jujube.

PubMed

Peng, Wei; Zhao, Liuwei; Liu, Fengmao; Xue, Jiaying; Li, Huichen; Shi, Kaiwei

2014-01-01

The changes of imidacloprid, pyraclostrobin, azoxystrobin and fipronil residues were studied to investigate the carryover of pesticide residues in winter jujube during paste processing. A multi-residue analytical method for winter jujube was developed based on the QuEChERS approach. The recoveries for the pesticides were between 87.5% and 116.2%. LODs ranged from 0.002 to 0.1 mg kg(-1). The processing factor (Pf) is defined as the ratio of pesticide residue concentration in the paste to that in winter jujube. Pf was higher than 1 for the removal of extra water, and other steps were generally less than 1, indicating that the whole process resulted in lower pesticide residue levels in paste. Peeling would be the critical step for pesticide removal. Processing factors varied among different pesticides studied. The results are useful to address optimisation of the processing techniques in a manner that leads to considerable pesticide residue reduction.

Perspectives on Rural Health Workforce Issues: Illinois-Arkansas Comparison

ERIC Educational Resources Information Center

MacDowell, Martin; Glasser, Michael; Fitts, Michael; Fratzke, Mel; Peters, Karen

2009-01-01

Context: Past research has documented rural physician and health care professional shortages. Purpose: Rural hospital chief executive officers' (CEOs') reported shortages of health professionals and perceptions about recruiting and retention are compared in Illinois and Arkansas. Methods: A survey, previously developed and sent to 28 CEOs in…

Movement Education-Past-Present-Future.

ERIC Educational Resources Information Center

Fowler, John S.

Physical education in England at the secondary school level was dominated in the 1950's by a formal, disciplinary method of teaching known as the "Swedish Drill," developed from the remedial gymnastics of P. H. Ling. However, at the elementary education level, a change towards informality, discovery learning, learning environments, and…

INTERNATIONAL PERSPECTIVE: U.S. EPA'S APPROACH TO SURVEILLANCE AND MANAGEMENT OF WATER QUALITY

EPA Science Inventory

For the past 35 years, the Environmental Protection Agency (EPA) has been establishing health-based standards for more than 80 contaminants and developing water quality methods and tools to monitor, assess, and report on the health of America's water resources. The Safe Drinking ...

Family Stories: Eliciting Tolerance and Understanding

ERIC Educational Resources Information Center

Dukes, Melanie Anne Dillett

2009-01-01

The past and present provide an important reference to understanding the circumstances and cultural differences that assist in the development of our methods of interaction. Therefore, the purpose of the study was to provide a process of personal self-reflection of experiences by which administrators, school officials, staff, and faculty can…

Annotation: Neurofeedback--Train Your Brain to Train Behaviour

ERIC Educational Resources Information Center

Heinrich, Hartmut; Gevensleben, Holger; Strehl, Ute

2007-01-01

Background: Neurofeedback (NF) is a form of behavioural training aimed at developing skills for self-regulation of brain activity. Within the past decade, several NF studies have been published that tend to overcome the methodological shortcomings of earlier studies. This annotation describes the methodical basis of NF and reviews the evidence…

Designing Flat-Plate Photovoltaic Arrays

NASA Technical Reports Server (NTRS)

Ross, R. G., Jr.

1984-01-01

Report presents overview of state of art in design techniques for flat-plate solar photovoltaic modules and arrays. Paper discusses design requirements, design analyses, and test methods identified and developed for this technology over past several years in effort to reduce cost and improve utility and reliability for broad spectrum of terrestrial applications.

DEVELOPMENT OF DURATION-CURVE BASED METHODS FOR QUALIFYING VARIABILITY AND CHANGE IN WATERSHED HYDROLOGY AND WATER QUALITY

EPA Science Inventory

During the past decades, U.S. Environmental Protection Agency (EPA), U.S. Department of Agriculture (USDA) and other Federal program administrative and regulatory agencies spent considerable amounts of time and money to manage risks to surface waters associated with agricultural ...

Attitudes of Face-to-Face and E-Learning Instructors toward "Active Learning"

ERIC Educational Resources Information Center

Pundak, David; Herscovitz, Orit; Shacham, Miri

2010-01-01

Instruction in higher education has developed significantly over the past two decades, influenced by two trends: promotion of active learning methods and integration of web technology in e-Learning. Many studies found that active teaching improves students' success, involvement and thinking skills. Nevertheless, internationally, most instructors…

METHODS FOR AQUATIC RESOURCE ASSESSMENT (MARA) FY 2008 - 2012

EPA Science Inventory

For the past 17 years, members of the Freshwater Ecology Branch (FEB) at EPA’s Western Ecology Division (WED) have been engaged in research to develop the concepts and tools that would allow EPA and it’s partners to monitor the status and trends in the condition of freshwater sys...

Telecommunications and the Rural American, Today and Tomorrow.

ERIC Educational Resources Information Center

Filep, Robert T.

A number of projects have been conducted over the past 10 years to demonstrate how rural education services might be provided via satellite and other methods of telecommunications. Paralleling these activities has been rapid development of telecommunications technology. Increased capacity at reduced cost has been realized in successive…

"If You Cannot Say It, Point to It"

ERIC Educational Resources Information Center

Crews, Sarah

2014-01-01

Practice as research and performance as research are methods that have developed significantly over the past decade and have subsequently caused debate within the creative arts industry and in university culture. During a research seminar at Goldsmiths University in 2011, Professor Dan Rebellato proposed the question: "What if there is no…

EXPERIENCES WITH USING PROBABILISTIC EXPOSURE ANALYSIS METHODS IN THE U.S. EPA

EPA Science Inventory

Over the past decade various Offices and Programs within the U.S. EPA have either initiated or increased the development and application of probabilistic exposure analysis models. These models have been applied to a broad range of research or regulatory problems in EPA, such as e...

An in vitro Comparative Evaluation of Three Remineralizing Agents using Confocal Microscopy

PubMed Central

Chokshi, Achala; Konde, Sapna; Shetty, Sunil Raj; Chandra, Kumar Narayan; Jana, Sinjana; Mhambrey, Sanjana; Thakur, Sneha

2016-01-01

Introduction The caries process has been thought to be irreversible, resulting in the permanent loss of tooth substance and eventually the development of a cavity. Recent approaches focused on application of remineralizing agents to incipient carious lesions, aim at controlling demineralization and promoting remineralization. Remineralizing agents create a supersaturated environment around the lesion; thus, preventing mineral loss and forces calcium and phosphate ions in the vacant areas. Aim To compare and evaluate the remineralization potential of Fluoride Varnish, CPP-ACP Paste (Casein Phosphopeptide-Amorphous Calcium Phosphate) and fTCP Paste (functionalized Tricalcium Phosphate) using confocal microscope. Materials and Methods Two windows of 3X3mm were created on the labial cervical and incisal thirds in 60 permanent maxillary central incisors. The teeth were demineralized to create artificial caries and divided into three groups of 20 each. Group I specimens were coated with Fluoride Varnish once whereas those in CPP-ACP paste group and fTCP group were brushed for 2 minutes, twice daily for 20 and 40 days. The specimens were stored in artificial saliva during the study period and were later sectioned and observed under confocal microscope. Data obtained was statistically analyzed using Fischer’s exact test, ANOVA and post-hoc Bonferroni’s test. Results Fluoride Varnish, CPP-ACP Paste and fTCP Paste showed remineralization of artificial carious lesions at both the time intervals. Fluoride varnish showed the highest remineralization followed by CPP-ACP Paste and fTCP Paste. A statistically significant increase in remineralization potential of CPP-ACP Paste and fTCP Paste was observed at the end of 40 days as compared to 20 days. Conclusion Fluoride varnish showed the greatest remineralization potential of artificial carious lesions followed by CPP-ACP Paste and fTCP Paste respectively. PMID:27504408

An odor flux model for cattle feedlots

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ormerod, R.J.

1994-12-31

Odor nuisance associated with cattle feedlots has been an issue of major interest and concern to regulators, rural communities and the beef industry in Australia over the past decade. Methods of assessing the likely impacts of new feedlots on community odor exposure are still being developed, but in the past few years much has been learnt about the processes of odor generation, flux and dispersion as well as the acceptability of feedlot odor to exposed communities. This paper outlines a model which simulates the complex physical and chemical processes leading to odor emissions in a simple and practical framework. Themore » model, named BULSMEL, has been developed as a response to regulatory requirements for quantitative assessments of odor impact. It will continue to be refined as more data are gathered.« less

Limitations in small artisanal gold mining addressed by educational components paired with alternative mining methods.

PubMed

Zolnikov, Tara R

2012-03-01

Current solutions continue to be inadequate in addressing the longstanding, worldwide problem of mercury emissions from small artisanal gold mining. Mercury, an inexpensive and easily accessible heavy metal, is used in the process of extracting gold from ore. Mercury emissions disperse, affecting human populations by causing adverse health effects and environmental and social ramifications. Many developing nations have sizable gold ore deposits, making small artisanal gold mining a major source of employment in the world. Poverty drives vulnerable, rural populations into gold mining because of social and economic instabilities. Educational programs responding to this environmental hazard have been implemented in the past, but have had low positive results due to lack of governmental support and little economic incentive. Educational and enforced intervention programs must be developed in conjunction with governmental agencies in order to successfully eliminate this ongoing problem. Industry leaders offered hopeful suggestions, but revealed limitations when trying to develop encompassing solutions to halt mercury emissions. This research highlights potential options that have been attempted in the past and suggests alternative solutions to improve upon these methods. Some methods include buyer impact recognition, risk assessment proposals exposing a cost-benefit analysis and toxicokinetic modeling, public health awareness campaigns, and the education of miners, healthcare workers, and locals within hazardous areas of mercury exposure. These methods, paired with the implementation of alternative mining techniques, propose a substantial reduction of mercury emissions. Copyright © 2011 Elsevier B.V. All rights reserved.

Next-Generation Sequencing Analyses of Bacterial Community Structures in Soybean Pastes Produced in Northeast China.

PubMed

Lee, Mi-Hwa; Li, Fan-Zhu; Lee, Jiyeon; Kang, Jisu; Lim, Seong-Il; Nam, Young-Do

2017-04-01

Fermented soybean foods contain nutritional components including easily digestible peptides, cholesterol-free oils, minerals, and vitamins. Various fermented soybean foods have been developed and are consumed as flavoring condiments in Asian regions. While the quality of fermented soybean foods is largely affected by microorganisms that participate in the fermentation process, our knowledge about the microorganisms in soybean pastes manufactured in Northeast China is limited. The current study used a culture-independent barcoded pyrosequencing method targeting hypervariable V1/V2 regions of the 16S rRNA gene to evaluate Korean doenjang and soybean pastes prepared by the Hun Chinese (SPHC) and Korean minority (SPKM) populations in Northeast China. In total, 63399 high-quality sequences were derived from 16 soybean paste samples collected in Northeast China. Each bacterial species-level taxon of SPHC, SPKM, and Korean doenjang was clustered separately. Each paste contained representative bacterial species that could be distinguished from each other: Bacillus subtilis in SPKM, Tetragenococcus halophilus in SPHC, and Enterococcus durans in Korean doenjang. This is the 1st massive sequencing-based study analyzing microbial communities in soybean pastes manufactured in Northeast China, compared to Korean doenjang. Our results clearly showed that each soybean paste contained unique microbial communities that varied depending on the manufacturing process and location. © 2017 Institute of Food Technologists®.

Transgenic cotton: from biotransformation methods to agricultural application.

PubMed

Zhang, Baohong

2013-01-01

Transgenic cotton is among the first transgenic plants commercially adopted around the world. Since it was first introduced into the field in the middle of 1990s, transgenic cotton has been quickly adopted by cotton farmers in many developed and developing countries. Transgenic cotton has offered many important environmental, social, and economic benefits, including reduced usage of pesticides, indirect increase of yield, minimizing environmental pollution, and reducing labor and cost. Agrobacterium-mediated genetic transformation method is the major method for obtaining transgenic cotton. However, pollen tube pathway-mediated method is also used, particularly by scientists in China, to breed commercial transgenic cotton. Although transgenic cotton plants with disease-resistance, abiotic stress tolerance, and improved fiber quality have been developed in the past decades, insect-resistant and herbicide-tolerant cotton are the two dominant transgenic cottons in the transgenic cotton market.

IEA Wind Task 26: The Past and Future Cost of Wind Energy, Work Package 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lantz, E.; Wiser, R.; Hand, M.

2012-05-01

Over the past 30 years, wind power has become a mainstream source of electricity generation around the world. However, the future of wind power will depend a great deal on the ability of the industry to continue to achieve cost of energy reductions. In this summary report, developed as part of the International Energy Agency Wind Implementing Agreement Task 26, titled 'The Cost of Wind Energy,' we provide a review of historical costs, evaluate near-term market trends, review the methods used to estimate long-term cost trajectories, and summarize the range of costs projected for onshore wind energy across an arraymore » of forward-looking studies and scenarios. We also highlight the influence of high-level market variables on both past and future wind energy costs.« less

Method Of Making An Ultracapacitor Electrode

DOEpatents

Wei, Chang; Jerabek, Elihu Calvin; DeJager, Katherine Dana; LeBlanc, Jr., Oliver Harris

2003-05-06

A paste of organic solvent with dissolved organic salt and active carbon is formed and a uniform film of the paste is applied onto a substrate by casting the paste into a clearance between a knife blade and the substrate. The paste is evaporated to form a paste electrode for an ultracapacitor.

Method of making an ultracapacitor electrode

DOEpatents

Wei, Chang; Jerabek, Elihu Calvin; DeJager, Katherine Dana; LeBlanc, Jr., Oliver Harris

2001-10-16

A paste of organic solvent with dissolved organic salt and active carbon is formed and a uniform film of the paste is applied onto a substrate by casting the paste into a clearance between a knife blade and the substrate. The paste is evaporated to form a paste electrode for an ultracapacitor.

Physical, proximate, functional and pasting properties of flour produced from gamma irradiated cowpea (Vigna unguiculata, L. Walp)

NASA Astrophysics Data System (ADS)

Darfour, B.; Wilson, D. D.; Ofosu, D. O.; Ocloo, F. C. K.

2012-04-01

Cowpeas are leguminous seeds widely produced and consumed in most developing countries of sub Saharan Africa. The aim of this study was to determine the physical, proximate, functional and pasting properties of flour obtained from gamma irradiated cowpea. Four cowpea cultivars were irradiated with gamma radiation at dose levels of 0.25, 0.5, 0.75, 1.0 and 1.5 kGy with the unirradiated cultivars serving as controls. The samples were hammer milled, sieved and stored at 4 °C for analysis. Physical, proximate, functional, pasting properties were determined using appropriate methods. In general, the irradiation dose applied to cowpea for insect control did not significantly affect the physical and proximate properties of the flour. However, significant increase (p<0.05) was achieved in paste bulk density, water and oil absorption capacities, foam capacities and least gelation concentrations of flour in general, which may be attributed to the irradiation. The radiation reduced the swelling power and water solubility index significantly. The peak temperature, peak viscosity and setback viscosity of the pastes were significantly (p<0.05) reduced while breakdown viscosity was significantly (p<0.05) increased by the radiation. It was established that the doses used on cowpea affected both the functional and pasting properties of the flour.

Oral retention of fluoride from a mucosa adhesive paste (Orabase) supplemented with NaF--a pilot study.

PubMed

Gabre, Pia; Ellefsen, Birita; Birkhed, Dowen; Gahnberg, Lars

2005-01-01

Individuals with cognitive impairments have an increased caries risk. Methods to prevent caries based on home care use of fluorides (F) presuppose a person's ability to cooperate and follow instructions. The aim of the present investigation was therefore to develop and evaluate an F-containing mucosa adhesive paste, which can be applied in home care by nursing staff. A cross-over, double-blind study design was used. The F concentrations were studied in whole saliva and interproximal fluid samples after application of a paste with 0.1% F based on the mucosa adhesive Orabase. A placebo product without F was used as control. In six healthy adults the paste was applied before sleep in the vestibulum in the region of the first molar in each quadrant. The application was repeated during four nights. Six hours after the application of the F paste the F concentrations in the interproximal areas and whole saliva had increased by 12-160 times compared to samples collected before the applications. The lower increase of the interproximal F concentrations was observed in the front region. The results suggest that an F-containing mucosa adhesive paste may be a promising vehicle for caries prevention in subjects unable to follow traditional home care recommendations.

Understanding Drug Use Over the Life Course: Past, Present, and Future

PubMed Central

Hser, Yih-Ing; Hamilton, Alison; Niv, Noosha

2009-01-01

Over the past 20 years, much exciting addiction research has been conducted. Extensive knowledge has been gathered about comorbid issues, particularly mental health disorders, HIV, and criminal justice involvement. Health services addiction research has become increasingly sophisticated, shifting its focus from patients to consider also services, organizations, and financing structures. Furthermore, through several long-term follow-up studies, empirical evidence convincingly demonstrates that drug dependence is not an acute disorder, and is best understood through a life course perspective with an emphasis on chronicity This article highlights three major directions for future addiction research: developing strategies for chronic care (including longitudinal intervention studies), furthering cross-system linkage and coordination, and utilizing innovative methods (e.g., growth curve modeling, longitudinal mixed methods research) to strengthen the evidence base for the life course perspective on drug addiction. PMID:21234276

The production and quality of tomato concentrates.

PubMed

Hayes, W A; Smith, P G; Morris, A E

1998-10-01

The standards and specifications for the quality and composition of tomato concentrates are reviewed. The main quality parameters of tomato puree and paste are color, consistency and flavor. Overall, there is an absence of standardization of methods and instruments to define quality. While color can now be measured objectively, there are currently no standard color requirements for tomato concentrates. Rheological measurements on both tomato juice and concentrates are reviewed; the power law finds wide applicability, although other rheological characteristics, particularly time dependency, have received far less attention and there has been little effort to relate rheological understanding to the commonly used empirical tests such as consistency measurements. The volatiles responsible for flavor and odor have been identified to the point where the natural odor of tomato paste can be imitated. Attempts to develop objective methods as a substitute for sensory assessment are reviewed.

Ignitability test method

NASA Technical Reports Server (NTRS)

Bement, Laurence J.; Schimmel, Morry L.

1989-01-01

To overcome serious weaknesses in determining the performance of initiating devices, a novel 'ignitability test method', representing actual design interfaces and ignition materials, has been developed. Ignition device output consists of heat, light, gas an burning particles. Past research methods have evaluated these parameters individually. This paper describes the development and demonstration of an ignitability test method combining all these parameters, and the quantitative assessment of the ignition performance of two widely used percussion primers, the M42C1-PA101 and the M42C2-793. The ignition materials used for this evaluation were several powder, granule and pellet sizes of black powder and boron-potassium nitrate. This test method should be useful for performance evaluation of all initiator types, quality assurance, evaluation of ignition interfaces, and service life studies of initiators and ignition materials.

Progress in adapting k-NN methods for forest mapping and estimation using the new annual Forest Inventory and Analysis data

Treesearch

Reija Haapanen; Kimmo Lehtinen; Jukka Miettinen; Marvin E. Bauer; Alan R. Ek

2002-01-01

The k-nearest neighbor (k-NN) method has been undergoing development and testing for applications with USDA Forest Service Forest Inventory and Analysis (FIA) data in Minnesota since 1997. Research began using the 1987-1990 FIA inventory of the state, the then standard 10-point cluster plots, and Landsat TM imagery. In the past year, research has moved to examine...

Climatic Change--Past, Present & Future

ERIC Educational Resources Information Center

Lindholm, Roy C.

1976-01-01

Presented is a review of studies investigating factors affecting climatic changes in the Earth's atmosphere--past, present, and future. Dating methods, particularly the Oxygen 18/16 method, are discussed. (SL)

Document Form and Character Recognition using SVM

NASA Astrophysics Data System (ADS)

Park, Sang-Sung; Shin, Young-Geun; Jung, Won-Kyo; Ahn, Dong-Kyu; Jang, Dong-Sik

2009-08-01

Because of development of computer and information communication, EDI (Electronic Data Interchange) has been developing. There is OCR (Optical Character Recognition) of Pattern recognition technology for EDI. OCR contributed to changing many manual in the past into automation. But for the more perfect database of document, much manual is needed for excluding unnecessary recognition. To resolve this problem, we propose document form based character recognition method in this study. Proposed method is divided into document form recognition part and character recognition part. Especially, in character recognition, change character into binarization by using SVM algorithm and extract more correct feature value.

Aeronautic Instruments. Section VI : Aerial Navigation and Navigating Instruments

NASA Technical Reports Server (NTRS)

Eaton, H N

1923-01-01

This report outlines briefly the methods of aerial navigation which have been developed during the past few years, with a description of the different instruments used. Dead reckoning, the most universal method of aerial navigation, is first discussed. Then follows an outline of the principles of navigation by astronomical observation; a discussion of the practical use of natural horizons, such as sea, land, and cloud, in making extant observations; the use of artificial horizons, including the bubble, pendulum, and gyroscopic types. A description is given of the recent development of the radio direction finder and its application to navigation.

Experimental Study on Comprehensive Performance of Full Tailings Paste Filling in Jiaojia Gold Mine.

NASA Astrophysics Data System (ADS)

Zhang, Z. H.; Zou, Q. B.; Wang, P. Z.

2017-11-01

Filling mining method is the main method of modern underground mining. High concentration cementation is carried out using coarse tailing of +37 μm, and the mine has maturely used classified tailings paste filling technology. The gold mine studied on the performance of full tailings paste filling in order to maximize the use of tailings, reduce -37 μm fine tailings discharged into the tailing pond, reduce mining cost and eliminate security risks. The results show that: comprehensive index of full tailings paste filling is higher than that of classified tailings high concentration cementation filling, and the full tailings paste filling of 76% mass concentration has the best comprehensive index of slump, expansibility, yield stress and viscosity to meet the mining method requirements, which can effectively reduce the mining loss rate and dilution rate.

Factors influencing the intention of women in rural Ghana to adopt postpartum family planning

PubMed Central

2013-01-01

Background Uptake of postpartum family planning (PPFP) remains low in sub-Saharan Africa and very little is known about how pregnant women arrive at their decisions to adopt PPFP. This information is needed to guide the development of interventions to promote PPFP. Methods We conducted a survey among pregnant women attending antenatal clinics in a rural district in Ghana. We used univariate and multivariate logistic regression analysis to explore how knowledge of various family planning (FP) methods, past experience with their use and the acceptability of PPFP to male partners and close relations influenced the intention of pregnant women to adopt PPFP. Results We interviewed 1914 pregnant women in four health facilities. About 84% considered PPFP acceptable, and 70% intended to adopt a method. The most preferred methods were injectables (31.5%), exclusive breastfeeding (16.7%), and oral contraceptive pills (14.8%). Women whose first choice of PPFP method were injectables were more likely to be women who had had past experience with its use (O.R = 2.07, 95% C.I. 1.50-2.87). Acceptability of PPFP by the pregnant woman (O.R. = 3.21, 1.64-6.26), perception of partner acceptability (O.R. = 3.20, 1.94-5.48), having had prior experience with the use of injectables (O.R. = 3.72, 2.61-5.30) were the strongest predictors of the intention to adopt PPFP. Conversely women who knew about the diaphragm (O.R. = 0.59, 0.38-0.93) and those who had past experience with IUD use (O.R. = 0.13, 0.05-0.38) were less likely to want to adopt PPFP. Conclusions Acceptability of PPFP to the pregnant woman, male partner approval, and past experience with the use of injectables are important factors in the PPFP decisions of women in this population. Antenatal and early postnatal care need to be adapted to take these factors into consideration. PMID:23870234

Comparison of physicochemical and functional properties of flour and starch extract in different methods from Africa locust bean (Parkia biglobosa) seeds.

PubMed

Sankhon, Abdoulaye; Amadou, Issoufou; Yao, Wei-Rong; Wang, Heya; Qian, He; Sangare, Moustapha

2014-01-01

African locust bean tree is an important food tree for both human and livestock such as husks and pods. It plays a very vital role in the rural areas. The aim of this study was to evaluate some physicochemical, mineral characteristics and functional properties of flour and starch extract produced from Parkia biglobosa seeds, using different methods. Three different methods were used for starch extraction in other to get the Starch yield (%),composition analysis for; moisture, protein, fat, ash and fiber contents of flour and starch extracts from Parkia biglobosa were determined on dry basis (db), by AACC method, color and PH value measurements was carried out using color flex spectrocolorimeter, and the official method of AOAC respectively. Pasting properties was determined and X-ray powder starch diffraction was used to examine the crystalline property of flour and starch extract. Gelatinization characteristics and in vitro starch digestibility were also determined, test results were processed using one-way analysis of variance (ANOVA). Flour showed higher (P < 0.05), moisture content, fat, carbohydrate, amylopectine, and protein content than starch, while amylose content of this starch was higher (P<0.05). Phosphorus, sodium, magnesium, and potassium minerals content were higher in flour than starch. Pasting properties, gelatinisation, color, pH values, water and oil absorption capacity content of the flour were found to be higher than that of starch. The pasting characteristics showed a decrease of viscosity, final viscosity, set back value, breakdown, and pasting temperature of flour when compared to that of starch. From our results, we speculate that flour from native Parkia biglobosa grown in Guinea under controlled environmental conditions could be considered as an ideal RS material, whereas the extract Parkia starch could be an ideal SDS material. Therefore, these may offer an interesting alternative for food developers, depending on their characteristics and functional properties.

A Review of Computational Methods for Finding Non-Coding RNA Genes

PubMed Central

Abbas, Qaisar; Raza, Syed Mansoor; Biyabani, Azizuddin Ahmed; Jaffar, Muhammad Arfan

2016-01-01

Finding non-coding RNA (ncRNA) genes has emerged over the past few years as a cutting-edge trend in bioinformatics. There are numerous computational intelligence (CI) challenges in the annotation and interpretation of ncRNAs because it requires a domain-related expert knowledge in CI techniques. Moreover, there are many classes predicted yet not experimentally verified by researchers. Recently, researchers have applied many CI methods to predict the classes of ncRNAs. However, the diverse CI approaches lack a definitive classification framework to take advantage of past studies. A few review papers have attempted to summarize CI approaches, but focused on the particular methodological viewpoints. Accordingly, in this article, we summarize in greater detail than previously available, the CI techniques for finding ncRNAs genes. We differentiate from the existing bodies of research and discuss concisely the technical merits of various techniques. Lastly, we review the limitations of ncRNA gene-finding CI methods with a point-of-view towards the development of new computational tools. PMID:27918472

Preparing ultrafine PbS powders from the scrap lead-acid battery by sulfurization and inert gas condensation

NASA Astrophysics Data System (ADS)

Xia, Huipeng; Zhan, Lu; Xie, Bing

2017-02-01

A novel method for preparing ultrafine PbS powders involving sulfurization combined with inert gas condensation is developed in this paper, which is applicable to recycle Pb from lead paste of spent lead-acid batteries. Initially, the effects of the evaporation and condensation temperature, the inert gas pressure, the condensation distance and substrate on the morphology of as-obtained PbS ultrafine particles are intensively investigated using sulfur powders and lead particles as reagents. Highly dispersed and homogeneous PbS nanoparticles can be prepared under the optimized conditions which are 1223 K heating temperature, 573 K condensation temperature, 100 Pa inert gas pressure and 60 cm condensation distance. Furthermore, this method is successfully applied to recycle Pb from the lead paste of spent lead acid battery to prepare PbS ultrafine powders. This work does not only provide the theoretical fundamental for PbS preparation, but also provides a novel and efficient method for recycling spent lead-acid battery with high added-value products.

Assessment of human energy exchange: historical overview.

PubMed

Heymsfield, S B; Bourgeois, B; Thomas, D M

2017-03-01

Energy exchange is fundamental to life and is a cornerstone in the study of human physiology, metabolism and nutrition. A global effort is underway to further our understanding of human energy exchange and its components as a means of establishing the mechanistic underpinnings of the evolving obesity and chronic disease epidemics. The current report establishes a conceptual historical framework for examining the evolution of energy exchange concepts and measurement methods. We review developments taking place over more than 2000 years during which humans endeavored to establish the source of body heat, the 'fire of life'. Major conceptual and methodological advances over the past three centuries have incrementally advanced the field and created the energy exchange paradigm within which we now work. As in the past, innovative experimental ideas and measurement methods are now needed to answer important questions brought to light by the obesity and chronic disease epidemics. Nevertheless, older classical measurement methods based on calorimetry techniques still hold a strong position in the field as many diet and weight-related questions remain unanswered.

Methodology, status and plans for development and assessment of HEXTRAN, TRAB and APROS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vanttola, T.; Rajamaeki, M.; Tiihonen, O.

1997-07-01

A number of transient and accident analysis codes have been developed in Finland during the past twenty years mainly for the needs of their own power plants, but some of the codes have also been utilized elsewhere. The continuous validation, simultaneous development and experiences obtained in commercial applications have considerably improved the performance and range of application of the codes. At present, the methods allow fairly covering accident analysis of the Finnish nuclear power plants.

Toxin Detection by Surface Plasmon Resonance

PubMed Central

Hodnik, Vesna; Anderluh, Gregor

2009-01-01

Significant efforts have been invested in the past years for the development of analytical methods for fast toxin detection in food and water. Immunochemical methods like ELISA, spectroscopy and chromatography are the most used in toxin detection. Different methods have been linked, e.g. liquid chromatography and mass spectrometry (LC-MS), in order to detect as low concentrations as possible. Surface plasmon resonance (SPR) is one of the new biophysical methods which enables rapid toxin detection. Moreover, this method was already included in portable sensors for on-site determinations. In this paper we describe some of the most common methods for toxin detection, with an emphasis on SPR. PMID:22573957

Pathways to lean software development: An analysis of effective methods of change

NASA Astrophysics Data System (ADS)

Hanson, Richard D.

This qualitative Delphi study explored the challenges that exist in delivering software on time, within budget, and with the original scope identified. The literature review identified many attempts over the past several decades to reform the methods used to develop software. These attempts found that the classical waterfall method, which is firmly entrenched in American business today was to blame for this difficulty (Chatterjee, 2010). Each of these proponents of new methods sought to remove waste, lighten out the process, and implement lean principles in software development. Through this study, the experts evaluated the barriers to effective development principles and defined leadership qualities necessary to overcome these barriers. The barriers identified were issues of resistance to change, risk and reward issues, and management buy-in. Thirty experts in software development from several Fortune 500 companies across the United States explored each of these issues in detail. The conclusion reached by these experts was that visionary leadership is necessary to overcome these challenges.

Calculation of compressible boundary layer flow about airfoils by a finite element/finite difference method

NASA Technical Reports Server (NTRS)

Strong, Stuart L.; Meade, Andrew J., Jr.

1992-01-01

Preliminary results are presented of a finite element/finite difference method (semidiscrete Galerkin method) used to calculate compressible boundary layer flow about airfoils, in which the group finite element scheme is applied to the Dorodnitsyn formulation of the boundary layer equations. The semidiscrete Galerkin (SDG) method promises to be fast, accurate and computationally efficient. The SDG method can also be applied to any smoothly connected airfoil shape without modification and possesses the potential capability of calculating boundary layer solutions beyond flow separation. Results are presented for low speed laminar flow past a circular cylinder and past a NACA 0012 airfoil at zero angle of attack at a Mach number of 0.5. Also shown are results for compressible flow past a flat plate for a Mach number range of 0 to 10 and results for incompressible turbulent flow past a flat plate. All numerical solutions assume an attached boundary layer.

Development of rigorous fatty acid near-infrared spectroscopy quantitation methods in support of soybean oil improvement

USDA-ARS?s Scientific Manuscript database

The seed of soybean (Glycine max L. Merr) is a valuable source of high quality edible oil and protein. Despite dramatic breeding gains over the past 80 years, soybean seed oil continues to be oxidatively unstable. Until recently, the majority of soybean oil underwent partial chemical hydrogenation. ...

Reflection on Prosperity: Localization of Pedagogy in China

ERIC Educational Resources Information Center

Wu, Daishu

2009-01-01

In the past 20 years, China has seen an influx of foreign pedagogies that emphasize Western concepts such as dualistic opposition and linear development. As educational studies have become localized to China's environment, there has been a tendency to substitute transplanted ideas for methods based on local research. As such Chinese educational…

Reconstructing Readability: Recent Developments and Recommendations in the Analysis of Text Difficulty

ERIC Educational Resources Information Center

Benjamin, Rebekah George

2012-01-01

Largely due to technological advances, methods for analyzing readability have increased significantly in recent years. While past researchers designed hundreds of formulas to estimate the difficulty of texts for readers, controversy has surrounded their use for decades, with criticism stemming largely from their application in creating new texts…

Hybridized Tennis Games for Utilization-Level and Higher Learners

ERIC Educational Resources Information Center

Kahan, David

2006-01-01

Over the past 10 years a number of articles pertaining to teaching tennis to elementary and middle school students have appeared (see Resources at the end of this article). These articles have focused on topics such as tactical play, basic skill instruction and drill, teaching progressions, organizational methods, and fitness development. While…

Curriculum Development in Studio-Style University Physics and Implications for Dissemination of Research-Based Reforms

ERIC Educational Resources Information Center

Foote, Kathleen T.

2016-01-01

Over the past few decades, a growing body of evidence demonstrates that students learn best in engaging, interactive, collaborative, and inquiry-based environments. However, most college science classes are still taught with traditional methods suggesting the existing selection of research-based instructional materials has not widely transformed…

The Policy Delphi: A Method for Identifying Intended and Unintended Consequences of Educational Policy

ERIC Educational Resources Information Center

Manley, R. Adam

2013-01-01

This article highlights a rarely utilized but effective technique for identifying intended and unintended consequences of past or current policy or policy change. The author guides the reader through the process of identifying potential participants, contacting participants, developing the policy Delphi instrument, and analyzing the findings by…

The Development of Temporal Metamemory

ERIC Educational Resources Information Center

Friedman, William J.

2007-01-01

In two studies of knowledge about the properties and processes of memory for the times of past events, 178 children from 5 through 13 years of age and 40 adults answered questions about how they would remember times on different scales, how temporal memory is affected by retention interval, and the usefulness of different methods. The adults…

A Review on Making Things See: Augmented Reality for Futuristic Virtual Educator

ERIC Educational Resources Information Center

Iqbal, Javid; Sidhu, Manjit Singh

2017-01-01

In the past few years many choreographers have focused upon implementation of computer technology to enhance their artistic skills. Computer vision technology presents new methods for learning, instructing, developing, and assessing physical movements as well as provides scope to expand dance resources and rediscover the learning process. This…

Vocational Evaluation of Severely Physically Impaired Individuals: Considerations and Techniques.

ERIC Educational Resources Information Center

Bates, Laurence A.

In the past two decades, significant advances have been made in understanding the vocational potential of severely physically impaired adults. However, instruments to evaluate the vocational ability of these persons have been scarce or unsuitable, and attempts to adapt existing instruments or to develop new methods of evaluating these persons have…

Factors Influencing Learning through Play in ICT Settings

ERIC Educational Resources Information Center

Kennewell, Steve; Morgan, Alex

2006-01-01

Using a mixed method approach of questionnaires, observations and field notes, the authors have studied a number of settings during the past two years which have focussed on the development of ICT capability through play. Some of these have involved children identified as disaffected or disadvantaged, whilst others have involved initial teacher…

Instructed Pragmatics at a Glance: Where Instructional Studies Were, Are, and Should Be Going

ERIC Educational Resources Information Center

Taguchi, Naoko

2015-01-01

This paper brings together the research and developments of instructed pragmatics over the past three decades by reporting the synthesis findings of instructional intervention studies in interlanguage pragmatics. Two questions have guided this investigation: (1) is instruction effective in learning pragmatics?; and (2) what methods are most…

Activities Using Headsticks and Optical Pointers: A Description of Methods.

ERIC Educational Resources Information Center

Eriksson, Britt-Marie; And Others

A variety of head-mounted aids have been developed in the past decade to fill in the functional gaps of children and adults unable to use their hands at standard capacity. For those with speech difficulties, the optical pointer, headstick and mouthstick also provide communication alternatives. This handbook discusses the characteristics of several…

Educating the Gifted Child: Challenge and Response in the U.S.A.

ERIC Educational Resources Information Center

Khatena, Joe

Considered in the paper are past and current developments in the education of gifted and talented students in the United States. Discussed are the following aspects: identification (including specific evaluations of giftedness, and distinctions between creativity and I.Q.); programing methods and approaches (such as creative problem solving…

Attack on Academic Dishonesty: What "Lies" Ahead?

ERIC Educational Resources Information Center

Marshall, Leisa L.; Varnon, Anthony W.

2017-01-01

The purpose of this study is to apply corporate fraud fighting methods to develop a framework for fighting academic dishonesty in higher education. The evidence in the literature overwhelmingly supports the existence of academic dishonesty in higher education, with increases in admitted cheating over the past several decades and as many as 80…

Jealousy: novel methods and neural correlates.

PubMed

Harmon-Jones, Eddie; Peterson, Carly K; Harris, Christine R

2009-02-01

Because of the difficulties surrounding the evocation of jealousy, past research has relied on reactions to hypothetical scenarios and recall of past experiences of jealousy. Both methodologies have limitations, however. The present research was designed to develop a method of evoking jealousy in the laboratory that would be well controlled, ethically permissible, and psychologically meaningful. Study 1 demonstrated that jealousy could be evoked in a modified version of K. D. Williams' (2007) Cyberball ostracism paradigm in which the rejecting person was computer-generated. Study 2, the first to examine neural activity during the active experience of jealousy, tested whether experienced jealousy was associated with greater relative left or right frontal cortical activation. The findings revealed that the experience of jealousy was correlated with greater relative left frontal cortical activation toward the "sexually" desired partner. This pattern of activation suggests that jealousy is associated with approach motivation. Taken together, the present studies developed a laboratory paradigm for the study of jealousy that should help foster research on one of the most social of emotions. (c) 2009 APA, all rights reserved

Determining noise temperatures in beam waveguide systems

NASA Technical Reports Server (NTRS)

Imbriale, W.; Veruttipong, W.; Otoshi, T.; Franco, M.

1994-01-01

A new 34-m research and development antenna was fabricated and tested as a precursor to introducing beam waveguide (BWG) antennas and Ka-band (32 GHz) frequencies into the NASA/JPL Deep Space Network. For deep space use, system noise temperature is a critical parameter. There are thought to be two major contributors to noise temperature in a BWG system: the spillover past the mirrors, and the conductivity loss in the walls. However, to date, there are no generally accepted methods for computing noise temperatures in a beam waveguide system. An extensive measurement program was undertaken to determine noise temperatures in such a system along with a correspondent effort in analytic prediction. Utilizing a very sensitive radiometer, noise temperature measurements were made at the Cassegrain focus, an intermediate focal point, and the focal point in the basement pedestal room. Several different horn diameters were used to simulate different amounts of spillover past the mirrors. Two analytic procedures were developed for computing noise temperature, one utilizing circular waveguide modes and the other a semiempirical approach. The results of both prediction methods are compared to the experimental data.

Energy systems research and development for petroleum refineries

DOE Office of Scientific and Technical Information (OSTI.GOV)

Robertson, J.L.

1982-08-01

For the past several years, Exxon Reasearch and Engineering has carried out a specific RandD program aimed at improving refinery energy efficiency through optimization of energy systems. Energy systems include: steam/power systems, heat exchange systems including hot oil and hot water belts and fuel systems, as well as some of the processes. This paper will describe the three major thrusts of this program which are: development of methods to support Site Energy Survey activities; development of energy management methods; and energy system optimization, which includes development of consistent, realistic, economic incentives for energy system improvements. Project selection criteria will alsomore » be discussed. The technique of a site energy survey will also be described briefly.« less

Advances in Optical Fiber-Based Faraday Rotation Diagnostics

DOE Office of Scientific and Technical Information (OSTI.GOV)

White, A D; McHale, G B; Goerz, D A

2009-07-27

In the past two years, we have used optical fiber-based Faraday Rotation Diagnostics (FRDs) to measure pulsed currents on several dozen capacitively driven and explosively driven pulsed power experiments. We have made simplifications to the necessary hardware for quadrature-encoded polarization analysis, including development of an all-fiber analysis scheme. We have developed a numerical model that is useful for predicting and quantifying deviations from the ideal diagnostic response. We have developed a method of analyzing quadrature-encoded FRD data that is simple to perform and offers numerous advantages over several existing methods. When comparison has been possible, we have seen good agreementmore » with our FRDs and other current sensors.« less

Nanosensors and nanomaterials for monitoring glucose in diabetes.

PubMed

Cash, Kevin J; Clark, Heather A

2010-12-01

Worldwide, diabetes is a rapidly growing problem that is managed at the individual level by monitoring and controlling blood glucose levels to minimize the negative effects of the disease. Because of limitations in diagnostic methods, significant research efforts are focused on developing improved methods to measure glucose. Nanotechnology has impacted these efforts by increasing the surface area of sensors, improving the catalytic properties of electrodes and providing nanoscale sensors. Here, we discuss developments in the past several years on both nanosensors that directly measure glucose and nanomaterials that improve glucose sensor function. Finally, we discuss challenges that must be overcome to apply these developments in the clinic. Copyright © 2010 Elsevier Ltd. All rights reserved.

Mass spectrometry for biomarker development

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wu, Chaochao; Liu, Tao; Baker, Erin Shammel

2015-06-19

Biomarkers potentially play a crucial role in early disease diagnosis, prognosis and targeted therapy. In the past decade, mass spectrometry based proteomics has become increasingly important in biomarker development due to large advances in technology and associated methods. This chapter mainly focuses on the application of broad (e.g. shotgun) proteomics in biomarker discovery and the utility of targeted proteomics in biomarker verification and validation. A range of mass spectrometry methodologies are discussed emphasizing their efficacy in the different stages in biomarker development, with a particular emphasis on blood biomarker development.

Adaptive Design of Confirmatory Trials: Advances and Challenges

PubMed Central

Lai, Tze Leung; Lavori, Philip W.; Tsang, Ka Wai

2015-01-01

The past decade witnessed major developments in innovative designs of confirmatory clinical trials, and adaptive designs represent the most active area of these developments. We give an overview of the developments and associated statistical methods in several classes of adaptive designs of confirmatory trials. We also discuss their statistical difficulties and implementation challenges, and show how these problems are connected to other branches of mainstream Statistics, which we then apply to resolve the difficulties and bypass the bottlenecks in the development of adaptive designs for the next decade. PMID:26079372

Three-Dimensional Steady Supersonic Euler Flow Past a Concave Cornered Wedge with Lower Pressure at the Downstream

NASA Astrophysics Data System (ADS)

Qu, Aifang; Xiang, Wei

2018-05-01

In this paper, we study the stability of the three-dimensional jet created by a supersonic flow past a concave cornered wedge with the lower pressure at the downstream. The gas beyond the jet boundary is assumed to be static. It can be formulated as a nonlinear hyperbolic free boundary problem in a cornered domain with two characteristic free boundaries of different types: one is the rarefaction wave, while the other one is the contact discontinuity, which can be either a vortex sheet or an entropy wave. A more delicate argument is developed to establish the existence and stability of the square jet structure under the perturbation of the supersonic incoming flow and the pressure at the downstream. The methods and techniques developed here are also helpful for other problems involving similar difficulties.

Direct Write Processing of Multi-micron Thickness Copper Nano-particle Paste on Flexible Substrates with 532 nm Laser Wavelength

NASA Astrophysics Data System (ADS)

Lopez-Espiricueta, Dunia; Fearon, Eamonn; Edwardson, Stuart; Dearden, Geoffrey

The Laser Assisted Direct Write (LA-DW) method has been implemented in the development of different markets and material processing, recently also used for creating Printed Circuit Boards (PCB) or electrical circuitry. The process consists in the deposition of metallic nano-particle (NP) inks, which are afterwards cured or sintered by laser irradiation, thus creating conductive pathways; advantages are speed, accuracy and the protection of the heat affected zone (HAZ). This research will study the behaviour of the heat dissipation relatively within the Nano-particle Copper paste after being irradiated with 1064 nm and 532 nm wavelengths, research will be developed on different widths and depths deposited onto flat surfaces such as flexible PET. Comparisons to be made between resistivity results obtained from different wavelengths.

New processable modified polyimide resins for adhesive and matrix applications

NASA Technical Reports Server (NTRS)

Landman, D.

1985-01-01

A broad product line of bismaleimide modified epoxy adhesives which are cured by conventional addition curing methods is described. These products fill a market need for 232 C (450 F) service adhesives which are cured in a manner similar to conventional 177 C (350 F) epoxy adhesives. The products described include film adhesives, pastes, and a primer. Subsequent development work has resulted in a new bismaleimide modified epoxy resin which uses a unique addition curing mechanism. This has resulted in products with improved thermomechanical properties compared to conventional bismaleimide epoxy resins. A film adhesive, paste, and matrix resin for composites using this new technology are described. In all cases, the products developed are heat cured by using typical epoxy cure cycles i.e., 1 hour at 177 C (350 F) followed by 2 hours postcure at 246 C (475 F).

Preparation of magnetic TNT-imprinted polymer nanoparticles and their accumulation onto magnetic carbon paste electrode for TNT determination.

PubMed

Alizadeh, Taher

2014-11-15

In this study, the TNT-imprinted polymer shell was created on nano-sized Fe3O4 cores in order to construct the nano-sized magnetic molecularly imprinted polymer (nano-MMIP). For this purpose, the surface of the synthesized magnetic nanoparticles was modified with methacrylic acid. The modified particles were then utilized as the core on which the TNT-imprinted polymeric shell was synthesized. The synthesized materials were then characterized by scanning electron microscopy, FT-IR and thermal gravimetric analysis (TGA). The resulting nano-MMIP particles were suspended in TNT solution and then collected on the surface of a carbon paste electrode via a permanent magnet, situated within the CP electrode. The extracted TNT was analyzed on the CP electrode by applying square wave voltammetry (SWV). It was found that the oxidative signal of TNT is much favorable for TNT detection on the resulting magnetic carbon paste electrode. The electrode with nano-MMIP showed distinctly higher signal to TNT, compared to that containing magnetic non-imprinted polymer (MNIP) nanoparticles. All parameters influencing the method performance including extraction pH, extraction time and sorbent amount were evaluated and optimized. The developed method showed a dynamic linear concentration range of 1.0-130.0 nM for TNT measurement. The detection limit of the method was calculated to be 0.5 nM. The method showed appropriate capability for TNT analysis in real water samples. Copyright © 2014. Published by Elsevier B.V.

Analysis of nonintervention studies: technical supplement.

PubMed

Aickin, Mikel

2012-01-01

Methods for analyzing data in nonintervention clinical studies are substantially different from those that are appropriate for randomized clinical trials. Although the latter methods are well known, the former are not. A systematic approach for dealing with statistical confounding in nonintervention research has been developed over the past 30 to 40 years, and the essence of this theory constitutes the contents of this article. An accompanying, less technical article explains the implications of these results for clinical research.

Coupled-cluster computations of atomic nuclei

NASA Astrophysics Data System (ADS)

Hagen, G.; Papenbrock, T.; Hjorth-Jensen, M.; Dean, D. J.

2014-09-01

In the past decade, coupled-cluster theory has seen a renaissance in nuclear physics, with computations of neutron-rich and medium-mass nuclei. The method is efficient for nuclei with product-state references, and it describes many aspects of weakly bound and unbound nuclei. This report reviews the technical and conceptual developments of this method in nuclear physics, and the results of coupled-cluster calculations for nucleonic matter, and for exotic isotopes of helium, oxygen, calcium, and some of their neighbors.

The WISTAH hand study: A prospective cohort study of distal upper extremity musculoskeletal disorders

PubMed Central

2012-01-01

Background Few prospective cohort studies of distal upper extremity musculoskeletal disorders have been performed. Past studies have provided somewhat conflicting evidence for occupational risk factors and have largely reported data without adjustments for many personal and psychosocial factors. Methods/design A multi-center prospective cohort study was incepted to quantify risk factors for distal upper extremity musculoskeletal disorders and potentially develop improved methods for analyzing jobs. Disorders to analyze included carpal tunnel syndrome, lateral epicondylalgia, medial epicondylalgia, trigger digit, deQuervain’s stenosing tenosynovitis and other tendinoses. Workers have thus far been enrolled from 17 different employment settings in 3 diverse US states and performed widely varying work. At baseline, workers undergo laptop administered questionnaires, structured interviews, two standardized physical examinations and nerve conduction studies to ascertain demographic, medical history, psychosocial factors and current musculoskeletal disorders. All workers’ jobs are individually measured for physical factors and are videotaped. Workers are followed monthly for the development of musculoskeletal disorders. Repeat nerve conduction studies are performed for those with symptoms of tingling and numbness in the prior six months. Changes in jobs necessitate re-measure and re-videotaping of job physical factors. Case definitions have been established. Point prevalence of carpal tunnel syndrome is a combination of paraesthesias in at least two median nerve-served digits plus an abnormal nerve conduction study at baseline. The lifetime cumulative incidence of carpal tunnel syndrome will also include those with a past history of carpal tunnel syndrome. Incident cases will exclude those with either a past history or prevalent cases at baseline. Statistical methods planned include survival analyses and logistic regression. Discussion A prospective cohort study of distal upper extremity musculoskeletal disorders is underway and has successfully enrolled over 1,000 workers to date. PMID:22672216

Methods for Prediction of High-Speed Reacting Flows in Aerospace Propulsion

NASA Technical Reports Server (NTRS)

Drummond, J. Philip

2014-01-01

Research to develop high-speed airbreathing aerospace propulsion systems was underway in the late 1950s. A major part of the effort involved the supersonic combustion ramjet, or scramjet, engine. Work had also begun to develop computational techniques for solving the equations governing the flow through a scramjet engine. However, scramjet technology and the computational methods to assist in its evolution would remain apart for another decade. The principal barrier was that the computational methods needed for engine evolution lacked the computer technology required for solving the discrete equations resulting from the numerical methods. Even today, computer resources remain a major pacing item in overcoming this barrier. Significant advances have been made over the past 35 years, however, in modeling the supersonic chemically reacting flow in a scramjet combustor. To see how scramjet development and the required computational tools finally merged, we briefly trace the evolution of the technology in both areas.

[Technology Development for X-Ray Reflection for the Constellation-X Reflection Grating Spectrometer (RGS)

NASA Technical Reports Server (NTRS)

Schattenburg, Mark L.

2003-01-01

This Grant covers MIT support for the technology development of x-ray reflection gratings for the Constellation-X Reflection Grating Spectrometer (RGS). Since the start of the Grant MIT has extended its previously-developed patterning and super-smooth, blazed grating fabrication technology to ten-times smaller grating periods and ten-times larger blaze angles to demonstrate feasibility and performance in the off-plane grating geometry. In the past year we successfully developed several nanoimprint grating replication methods that achieved very high fidelity replication of master silicon gratings. Grating geometry on the nano and macro scales were faithfully replicated, demonstrating the viability of the process for manufacturing the thousands of gratings required for the RGS. We also successfully developed an improved metrology truss for holding test grating substrates during metrology. The flatness goal of grating substrates is under 500 nm. In the past, grating holders would cause non-repeatable distortion of >> 500 nm to the substrates due to friction and gravity sag. The new holder has a repeatability of under 50 nm which is adequate for the proposed RGS grating substrates.

Back-to-the-future: a fresh policy initiative for fisheries and a restoration ecology for ocean ecosystems

PubMed Central

Pitcher, Tony J.

2005-01-01

‘Back-to-the-future’ (BTF) is an integrative approach to a restoration ecology of the oceans that attempts to solve the fisheries crisis. To this end, it harnesses the latest understanding of ecosystem processes, developments in whole ecosystem simulation modelling, and insight into the human dimension of fisheries management. BTF includes new methods for describing past ecosystems, designing fisheries that meet criteria for sustainability and responsibility, and evaluating the costs and benefits of fisheries in restored ecosystems. Evaluation of alternative policy choices, involving trade-offs between conservation and economic values, employs a range of economic, social and ecological measures. Automated searches maximize values of objective functions, and the methodology includes analyses of model parameter uncertainty. Participatory workshops attempt to maximize compliance by fostering a sense of ownership among all stakeholders. Some challenges that have still to be met include improving methods for quantitatively describing the past, reducing uncertainty in ecosystem simulation techniques and in making policy choices robust against climate change. Critical issues include whether past ecosystems make viable policy goals, and whether desirable goals may be reached from today’s ecosystem. Examples from case studies in British Columbia, Newfoundland and elsewhere are presented. PMID:15713591

A cognitive stressor for event-related potential studies: the Portland arithmetic stress task.

PubMed

Atchley, Rachel; Ellingson, Roger; Klee, Daniel; Memmott, Tabatha; Oken, Barry

2017-05-01

In this experiment, we developed and evaluated the Portland Arithmetic Stress Task (PAST) as a cognitive stressor to evaluate acute and sustained stress reactivity for event-related potential (ERP) studies. The PAST is a titrated arithmetic task adapted from the Montreal Imaging Stress Task (MIST), with added experimental control over presentation parameters, improved and synchronized acoustic feedback and generation of timing markers needed for physiological analyzes of real-time brain activity. Thirty-one older adults (M = 60 years) completed the PAST. EEG was recorded to assess feedback-related negativity (FRN) and the magnitude of the stress response through autonomic nervous system activity and salivary cortisol. Physiological measures other than EEG included heart rate, respiration rate, heart rate variability, blood pressure and salivary cortisol. These measures were collected at several time points throughout the task. Feedback-related negativity evoked-potential responses were elicited and they significantly differed depending on whether positive or negative feedback was received. The PAST also increased systolic blood pressure, heart rate variability and respiration rates compared to a control condition attentional task. These preliminary results suggest that the PAST is an effective cognitive stressor. Successful measurement of the feedback-related negativity suggests that the PAST is conducive to EEG and time-sensitive ERP experiments. Moreover, the physiological findings support the PAST as a potent method for inducing stress in older adult participants. Further research is needed to confirm these results, but the PAST shows promise as a tool for cognitive stress induction for time-locked event-related potential experiments.

Sensitivity analysis of discrete structural systems: A survey

NASA Technical Reports Server (NTRS)

Adelman, H. M.; Haftka, R. T.

1984-01-01

Methods for calculating sensitivity derivatives for discrete structural systems are surveyed, primarily covering literature published during the past two decades. Methods are described for calculating derivatives of static displacements and stresses, eigenvalues and eigenvectors, transient structural response, and derivatives of optimum structural designs with respect to problem parameters. The survey is focused on publications addressed to structural analysis, but also includes a number of methods developed in nonstructural fields such as electronics, controls, and physical chemistry which are directly applicable to structural problems. Most notable among the nonstructural-based methods are the adjoint variable technique from control theory, and the Green's function and FAST methods from physical chemistry.

Conjugate-gradient optimization method for orbital-free density functional calculations.

PubMed

Jiang, Hong; Yang, Weitao

2004-08-01

Orbital-free density functional theory as an extension of traditional Thomas-Fermi theory has attracted a lot of interest in the past decade because of developments in both more accurate kinetic energy functionals and highly efficient numerical methodology. In this paper, we developed a conjugate-gradient method for the numerical solution of spin-dependent extended Thomas-Fermi equation by incorporating techniques previously used in Kohn-Sham calculations. The key ingredient of the method is an approximate line-search scheme and a collective treatment of two spin densities in the case of spin-dependent extended Thomas-Fermi problem. Test calculations for a quartic two-dimensional quantum dot system and a three-dimensional sodium cluster Na216 with a local pseudopotential demonstrate that the method is accurate and efficient. (c) 2004 American Institute of Physics.

Ethnographic analogy, the comparative method, and archaeological special pleading.

PubMed

Currie, Adrian

2016-02-01

Ethnographic analogy, the use of comparative data from anthropology to inform reconstructions of past human societies, has a troubled history. Archaeologists often express concern about, or outright reject, the practice--and sometimes do so in problematically general terms. This is odd, as (or so I argue) the use of comparative data in archaeology is the same pattern of reasoning as the 'comparative method' in biology, which is a well-developed and robust set of inferences which play a central role in discovering the biological past. In pointing out this continuity, I argue that there is no 'special pleading' on the part of archaeologists in this regard: biologists must overcome analogous epistemic difficulties in their use of comparative data. I then go on to emphasize the local, empirically tractable ways in which particular ethnographic analogies may be licensed. Copyright © 2015 Elsevier Ltd. All rights reserved.

Holography: childrens' window to relativity

NASA Astrophysics Data System (ADS)

MacShane, James E.

1995-02-01

This paper is concerned with the development of the concept of natural education. Psychology has discovered that all humans learn intuitively the cultural concepts of time from birth to eight and one-half to ten years of age. Einstein showed us that this must also be the natural time for the development of spatial concepts. The importance of this has been dramatized for me in the past eight years that I have been developing the Laser Arts and Holography Programs and Workshops. I have worked with over 100,000 students kindergarten through eighth grade. I have worked with 175 students age 8 to 10 in three hour and one half workshops specifically on the development of time and space concepts. The concepts developed are based upon the vast amount of psychological evidence related to the natural development of time and space understandings, Dr. Nils Abramson's 'Light in Flight' and subsequent work on the clarification of relativity through holography, and Maria Montessori's method of Scientific Education. The paper also demonstrates the natural method of teaching science to younger students is to teach scientifically. All of the research which has been done in the past 100 years has been used by the educational institutions to try to improve the system. What has not been done is changing the system to how humans learn. Because of the perceived hi-tech nature of the program I am able to dramatize the potential. An outline for a holography curriculum kindergarten through eighth grade is included.

Research trend in thermally stimulated current method for development of materials and devices in Japan

NASA Astrophysics Data System (ADS)

Iwamoto, Mitsumasa; Taguchi, Dai

2018-03-01

Thermally stimulated current (TSC) measurement is widely used in a variety of research fields, i.e., physics, electronics, electrical engineering, chemistry, ceramics, and biology. TSC is short-circuit current that flows owing to the displacement of charges in samples during heating. TSC measurement is very simple, but TSC curves give very important information on charge behaviors. In the 1970s, TSC measurement contributed greatly to the development of electrical insulation engineering, semiconductor device technology, and so forth. Accordingly, the TSC experimental technique and its analytical method advanced. Over the past decades, many new molecules and advanced functional materials have been discovered and developed. Along with this, TSC measurement has attracted much attention in industries and academic laboratories as a way of characterizing newly discovered materials and devices. In this review, we report the latest research trend in the TSC method for the development of materials and devices in Japan.

Recent Advances in the Method of Forces: Integrated Force Method of Structural Analysis

NASA Technical Reports Server (NTRS)

Patnaik, Surya N.; Coroneos, Rula M.; Hopkins, Dale A.

1998-01-01

Stress that can be induced in an elastic continuum can be determined directly through the simultaneous application of the equilibrium equations and the compatibility conditions. In the literature, this direct stress formulation is referred to as the integrated force method. This method, which uses forces as the primary unknowns, complements the popular equilibrium-based stiffness method, which considers displacements as the unknowns. The integrated force method produces accurate stress, displacement, and frequency results even for modest finite element models. This version of the force method should be developed as an alternative to the stiffness method because the latter method, which has been researched for the past several decades, may have entered its developmental plateau. Stress plays a primary role in the development of aerospace and other products, and its analysis is difficult. Therefore, it is advisable to use both methods to calculate stress and eliminate errors through comparison. This paper examines the role of the integrated force method in analysis, animation and design.

Learning from the Past: Supporting Teaching through the "Facing the Past" History Project in South Africa

ERIC Educational Resources Information Center

Tibbitts, Felisa

2006-01-01

This article presents an innovative professional development project, "Facing the Past-Transforming Our Future," developed collaboratively by the Western Cape Educational Department, the Cape Town Holocaust Centre (CTHC), and the US-based teacher professional development organization Facing History and Ourselves (FHAO). "Facing the…

Effect of calcium hydroxide and triple antibiotic paste as intracanal medicaments on the incidence of inter-appointment flare-up in diabetic patients: An in vivo study

PubMed Central

Pai, Swathi; Vivekananda Pai, A. R.; Thomas, Manuel S.; Bhat, Vishal

2014-01-01

Aim: To evaluate and compare the effect of antibacterial intracanal medicaments on inter-appointment flare-up in diabetic patients. Materials and Methods: Fifty diabetic patients requiring root canal treatment were assigned into groups I, II, and III. In group I, no intracanal medicament was placed. In groups II and III, calcium hydroxide and triple antibiotic pastes were placed as intracanal medicaments, respectively. Patients were instructed to record their pain on days 1, 2, 3, 7, and 14. Inter-appointment flare-up was evaluated using verbal rating scale (VRS). Results: Overall incidence of inter-appointment flare-up among diabetic patients was found to be 16%. In group I, 50% of the patients and in group II, 15% of the patients developed inter-appointment flare-up. However, no patients in group III developed inter-appointment flare-up. The comparison of these results was found to be statistically significant (P = 0.002; χ2 = 12.426). However, with respect to intergroup comparison, only the difference between groups I and III was found to be statistically significant (P = 0.002; χ2 = 12.00). Conclusions: Calcium hydroxide and triple antibiotic paste are effective for managing inter-appointment flare-ups in diabetic patients. Triple antibiotic paste is more effective than calcium hydroxide in preventing the occurrence of flare-up in diabetic patients. PMID:24944440

Cannabis Problem Experiences Among Users of the Tobacco-Cannabis Combination Known As Blunts

PubMed Central

Fairman, Brian J.

2015-01-01

Background In most of the world, cannabis smokers mix loose tobacco inside a joint, pipe, spliff, or cone. More recently, a ‘blunt’ formulation combines these two drugs by inserting cannabis into a hollowed-out cigar. Epidemiological research linking simultaneous use of these two drugs and the development of cannabis use disorders (CUD) remains unclear. This study estimates associations linking blunt smoking with levels and subtypes of cannabis problems. Methods Cross-sectional data on 27,767 past-year cannabis users were analyzed from the US National Survey on Drug Use and Health (NSDUH) conducted from 2009–2012. Ten self-reported items of DSM-IV CUD features elicited a single latent trait of cannabis problem (CP) severity, which was then regressed on past-year blunt smoking and past-month blunt frequency measures within the context of a conceptual model. Differential item functioning (DIF) analysis evaluated potential bias in CP feature response by blunt smoking history. Results Past-year blunt smoking was associated with higher CP severity compared to cannabis users who did not smoke blunts. Days of blunt smoking in the past month also predicted higher CP severity than less frequent blunt use. Those smoking blunts experienced more subjectively felt tolerance and having spent more time obtaining or using cannabis, but were less likely to experience other problems, even at the same level of CP severity. Conclusions These findings suggest smoking blunts might promote the development of problematic cannabis use. Responses to cannabis problems differed by history of blunt smoking, possibly implicating an influence of tobacco on measurement of cannabis use disorders. PMID:25746234

Development of high-viscosity, two-paste bioactive bone cements.

PubMed

Deb, S; Aiyathurai, L; Roether, J A; Luklinska, Z B

2005-06-01

Self-curing two-paste bone cements have been developed using methacrylate monomers with a view to formulate cements with low polymerization exotherm, low shrinkage, better mechanical properties, and improved adhesion to bone and implant surfaces. The monomers include bis-phenol A glycidyl dimethacrylate (bis-GMA), urethane dimethacrylate (UDMA) and triethylene glycol dimethacrylate (TEGDMA) as a viscosity modifier. Two-paste systems were formulated containing 60% by weight of a bioactive ceramic, hydroxyapatite. A methacroyloxy silane (A174) was used as a coupling agent due to its higher water stability in comparison to other aminosilanes to silanate the hydroxyapatite particles prior to composite formulation. A comparison of the FT-infrared spectrum of hydroxyapatite and silanated hydroxyapatite showed the presence of the carbonyl groups ( approximately 1720 cm(-1)), -C=C-( approximately 1630 cm(-1)) and Si-O- (1300-1250 cm(-1)) which indicated the availability of silane groups on the filler surface. Two methods of mixing were effected to form the bone cement: firstly by mixing in an open bowl and secondly by extruding the two pastes by an auto-mixing tip using a gun to dispense the pastes. Both types of cements yielded low polymerization exotherms with good mechanical properties; however, the lower viscosity of UDMA allowed better extrusion and handling properties. A biologically active apatite layer formed on the bone cement surface within a short period after its immersion in simulated body fluid, demonstrating in vitro bioactivity of the composite. This preliminary data thus suggests that UDMA is a viable alternative to bis-GMA as a polymerizable matrix in the formation of bone cements.

A speciation solver for cement paste modeling and the semismooth Newton method

DOE Office of Scientific and Technical Information (OSTI.GOV)

Georget, Fabien, E-mail: fabieng@princeton.edu; Prévost, Jean H., E-mail: prevost@princeton.edu; Vanderbei, Robert J., E-mail: rvdb@princeton.edu

2015-02-15

The mineral assemblage of a cement paste may vary considerably with its environment. In addition, the water content of a cement paste is relatively low and the ionic strength of the interstitial solution is often high. These conditions are extreme conditions with respect to the common assumptions made in speciation problem. Furthermore the common trial and error algorithm to find the phase assemblage does not provide any guarantee of convergence. We propose a speciation solver based on a semismooth Newton method adapted to the thermodynamic modeling of cement paste. The strong theoretical properties associated with these methods offer practical advantages.more » Results of numerical experiments indicate that the algorithm is reliable, robust, and efficient.« less

Use of isotope ratio mass spectrometry to differentiate between endogenous steroids and synthetic homologues in cattle: a review.

PubMed

Janssens, Geert; Courtheyn, Dirk; Mangelinckx, Sven; Prévost, Stéphanie; Bichon, Emmanuelle; Monteau, Fabrice; De Poorter, Geert; De Kimpe, Norbert; Le Bizec, Bruno

2013-04-15

Although substantial technical advances have been achieved during the past decades to extend and facilitate the analysis of growth promoters in cattle, the detection of abuse of synthetic analogs of naturally occurring hormones has remained a challenging issue. When it became clear that the exogenous origin of steroid hormones could be traced based on the (13)C/(12)C isotope ratio of the substances, GC/C/IRMS has been successfully implemented to this aim since the end of the past century. However, due to the costly character of the instrumental setup, the susceptibility of the equipment to errors and the complex and time consuming sample preparation, this method is up until now only applied by a limited number of laboratories. In this review, the general principles as well as the practical application of GC/C/IRMS to differentiate between endogenous steroids and exogenously synthesized homologous compounds in cattle will be discussed in detail, and will be placed next to other existing and to be developed methods based on isotope ratio mass spectrometry. Finally, the link will be made with the field of sports doping, where GC/C/IRMS has been established within the World Anti-Doping Agency (WADA) approved methods as the official technique to differentiate between exogenous and endogenous steroids over the past few years. Copyright © 2013 Elsevier B.V. All rights reserved.

Phylogenetic framework for coevolutionary studies: a compass for exploring jungles of tangled trees.

PubMed

Martínez-Aquino, Andrés

2016-08-01

Phylogenetics is used to detect past evolutionary events, from how species originated to how their ecological interactions with other species arose, which can mirror cophylogenetic patterns. Cophylogenetic reconstructions uncover past ecological relationships between taxa through inferred coevolutionary events on trees, for example, codivergence, duplication, host-switching, and loss. These events can be detected by cophylogenetic analyses based on nodes and the length and branching pattern of the phylogenetic trees of symbiotic associations, for example, host-parasite. In the past 2 decades, algorithms have been developed for cophylogetenic analyses and implemented in different software, for example, statistical congruence index and event-based methods. Based on the combination of these approaches, it is possible to integrate temporal information into cophylogenetical inference, such as estimates of lineage divergence times between 2 taxa, for example, hosts and parasites. Additionally, the advances in phylogenetic biogeography applying methods based on parametric process models and combined Bayesian approaches, can be useful for interpreting coevolutionary histories in a scenario of biogeographical area connectivity through time. This article briefly reviews the basics of parasitology and provides an overview of software packages in cophylogenetic methods. Thus, the objective here is to present a phylogenetic framework for coevolutionary studies, with special emphasis on groups of parasitic organisms. Researchers wishing to undertake phylogeny-based coevolutionary studies can use this review as a "compass" when "walking" through jungles of tangled phylogenetic trees.

Phylogenetic framework for coevolutionary studies: a compass for exploring jungles of tangled trees

PubMed Central

2016-01-01

Abstract Phylogenetics is used to detect past evolutionary events, from how species originated to how their ecological interactions with other species arose, which can mirror cophylogenetic patterns. Cophylogenetic reconstructions uncover past ecological relationships between taxa through inferred coevolutionary events on trees, for example, codivergence, duplication, host-switching, and loss. These events can be detected by cophylogenetic analyses based on nodes and the length and branching pattern of the phylogenetic trees of symbiotic associations, for example, host–parasite. In the past 2 decades, algorithms have been developed for cophylogetenic analyses and implemented in different software, for example, statistical congruence index and event-based methods. Based on the combination of these approaches, it is possible to integrate temporal information into cophylogenetical inference, such as estimates of lineage divergence times between 2 taxa, for example, hosts and parasites. Additionally, the advances in phylogenetic biogeography applying methods based on parametric process models and combined Bayesian approaches, can be useful for interpreting coevolutionary histories in a scenario of biogeographical area connectivity through time. This article briefly reviews the basics of parasitology and provides an overview of software packages in cophylogenetic methods. Thus, the objective here is to present a phylogenetic framework for coevolutionary studies, with special emphasis on groups of parasitic organisms. Researchers wishing to undertake phylogeny-based coevolutionary studies can use this review as a “compass” when “walking” through jungles of tangled phylogenetic trees. PMID:29491928

Sparse QSAR modelling methods for therapeutic and regenerative medicine

NASA Astrophysics Data System (ADS)

Winkler, David A.

2018-02-01

The quantitative structure-activity relationships method was popularized by Hansch and Fujita over 50 years ago. The usefulness of the method for drug design and development has been shown in the intervening years. As it was developed initially to elucidate which molecular properties modulated the relative potency of putative agrochemicals, and at a time when computing resources were scarce, there is much scope for applying modern mathematical methods to improve the QSAR method and to extending the general concept to the discovery and optimization of bioactive molecules and materials more broadly. I describe research over the past two decades where we have rebuilt the unit operations of the QSAR method using improved mathematical techniques, and have applied this valuable platform technology to new important areas of research and industry such as nanoscience, omics technologies, advanced materials, and regenerative medicine. This paper was presented as the 2017 ACS Herman Skolnik lecture.

A study of best practices in promoting sustainable urbanization in China.

PubMed

Tan, Yongtao; Xu, Hui; Jiao, Liudan; Ochoa, J Jorge; Shen, Liyin

2017-05-15

In the past twenty years, various sustainable urban development policies and methods had been implemented within China, such that sustainable urbanization is now more widely accepted. Some of these policies and methods have been found to be successful in improving the sustainability of cities in China. Those practices can be defined as the best practices of sustainable urbanization, which can provide useful references for future urban developments. However, few existing studies examine how to learn from these best practices. Combining the methods of content analysis and social network analysis, this paper conducts a comprehensive study on 150 best practices of sustainable urbanization in China. The methods and outcomes of the 150 best practices are identified. The research findings demonstrate the statistics of categories, methods and outcomes of the 150 best practices and the main adopted methods. The achieved outcomes in different regions of China are also presented. Copyright © 2017 Elsevier Ltd. All rights reserved.

College Drinking: Content Analysis of 30 Years of Research

ERIC Educational Resources Information Center

Broughton, Elizabeth Ann; Molasso, William R.

2006-01-01

Researchers applied a content analysis method to evaluate the 119 articles about college drinking that appeared in "Journal of College Student Development" and "NASPA Journal" during the past 30 years. The data revealed that a greater proportion of articles on college drinking appeared in the last decade (5.82%) than in the first decade (1.60%).…

Wiki, a New Wave of Innovation for Teaching and Collaborative Learning

ERIC Educational Resources Information Center

Mirzajani, Hassan; HajiAlizadeh, Kobra; Gorji, Omolbanin Hashemi; Zerafat, Romina; Saravi, Hanieh Rasouli; Alami, Reza

2015-01-01

Educational technology is a dynamic major which is ever developing. In the past, educational technology was one dimensional, but nowadays it has become multi-dimensional, flexible and learner-centered. A revolution has happened in teaching methods from the perspective of web. Novel technologies in web and new role of users' have led to the…

Pine Response and Hardwood Development After Brushsawing and Manual Herbicide Release of Loblolly Pine

Treesearch

Ronald L. Muir; Dwight K. Laur; Glenn R. Glover; James H. Miller

1998-01-01

Manually applied release treatments with herbicides have been increasing in use over the past decade in forests of the southeastern U.S.. Both industrial and non-industrial forest land managers are employing directed foliar sprays and basal sprays of herbicides. Innovations of these standard application methods utilize lower volumes, better nozzles, and improved...

The Great Leap Forward: Stepping Cautiously into the Proficiency-Based Classroom.

ERIC Educational Resources Information Center

Lovik, Thomas A.

As with any other development in foreign language education, it is critical that the elements of proficiency teaching be transferred to practitioners so that past mistakes, such as those made with the audiolingual method, are not repeated. Proficiency teaching must be carefully analyzed and critically presented to the next generation of teachers.…

Developing a Survey Instrument to Explore Career Pathways of Past Teacher Education Students

ERIC Educational Resources Information Center

Kidd, Lynda

2015-01-01

Despite reported shortages of teachers world-wide, around 50% of teacher education students do not establish themselves in the teaching profession. It is therefore important to confirm the career pathways these students undertake and that teacher education degrees are of benefit to them throughout their career. This paper describes the method used…

The Development of Interdisciplinary Thinking in the New Postmodern Education

ERIC Educational Resources Information Center

Yang, Shu Nu

2013-01-01

As an educator, it is always interesting to learn and employ new and creative ways of thinking and methods in teaching. However, the application of these new ideas in our classrooms needs more examination for better ways of implementation. Since the postmodernist theory and approaches have been practiced in education in the past few decades, the…

How (and Whether) to Teach Undergraduates about the Replication Crisis in Psychological Science

ERIC Educational Resources Information Center

Chopik, William J.; Bremner, Ryan H.; Defever, Andrew M.; Keller, Victor N.

2018-01-01

Over the past 10 years, crises surrounding replication, fraud, and best practices in research methods have dominated discussions in the field of psychology. However, no research exists examining how to communicate these issues to undergraduates and what effect this has on their attitudes toward the field. We developed and validated a 1-hr lecture…

Practical Methods for Estimating Software Systems Fault Content and Location

NASA Technical Reports Server (NTRS)

Nikora, A.; Schneidewind, N.; Munson, J.

1999-01-01

Over the past several years, we have developed techniques to discriminate between fault-prone software modules and those that are not, to estimate a software system's residual fault content, to identify those portions of a software system having the highest estimated number of faults, and to estimate the effects of requirements changes on software quality.

The "Public Opinion Survey of Human Attributes-Stuttering" (POSHA-S): Summary Framework and Empirical Comparisons

ERIC Educational Resources Information Center

St. Louis, Kenneth O.

2011-01-01

Purpose: The "Public Opinion Survey of Human Attributes-Stuttering" ("POSHA-S") was developed to make available worldwide a standard measure of public attitudes toward stuttering that is practical, reliable, valid, and translatable. Mean data from past field studies as comparisons for interpretation of "POSHA-S" results are reported. Method: Means…

Study on the Filament Yarns Spreading Techniques and Assessment Methods of the Electronic Fiberglass Fabric

NASA Astrophysics Data System (ADS)

Wang, Xi; Chen, Shouhui; Zheng, Tianyong; Ning, Xiangchun; Dai, Yifei

2018-03-01

The filament yarns spreading techniques of electronic fiberglass fabric were developed in the past few years in order to meet the requirements of the development of electronic industry. Copper clad laminate (CCL) requires that the warp and weft yarns of the fabric could be spread out of apart and formed flat. The penetration performance of resin could be improved due to the filament yarns spreading techniques of electronic fiberglass fabric, the same as peeling strength of CCL and drilling performance of printed circuit board (PCB). This paper shows the filament yarns spreading techniques of electronic fiberglass fabric from several aspects, such as methods and functions, also with the assessment methods of their effects.

Travel Demand Modeling

DOE Office of Scientific and Technical Information (OSTI.GOV)

Southworth, Frank; Garrow, Dr. Laurie

This chapter describes the principal types of both passenger and freight demand models in use today, providing a brief history of model development supported by references to a number of popular texts on the subject, and directing the reader to papers covering some of the more recent technical developments in the area. Over the past half century a variety of methods have been used to estimate and forecast travel demands, drawing concepts from economic/utility maximization theory, transportation system optimization and spatial interaction theory, using and often combining solution techniques as varied as Box-Jenkins methods, non-linear multivariate regression, non-linear mathematical programming,more » and agent-based microsimulation.« less

Developments in neonatal technology continue to improve infant outcomes.

PubMed

Noble, Lawrence

2003-09-01

The past 20 years have yielded little success in reducing prematurity rates or decreasing the major morbidities of premature infants. Determination of interventions to decrease prematurity rates, and the development of methods to reduce premature neurologic damage, are the challenges for the next 20 years. With the advent of genetic analysis and the ability to study environmental and genetic interactions, we may be on the threshold of another significant decrease in mortality and morbidity in the premature infant.

Algorithms and software for solving finite element equations on serial and parallel architectures

NASA Technical Reports Server (NTRS)

George, Alan

1989-01-01

Over the past 15 years numerous new techniques have been developed for solving systems of equations and eigenvalue problems arising in finite element computations. A package called SPARSPAK has been developed by the author and his co-workers which exploits these new methods. The broad objective of this research project is to incorporate some of this software in the Computational Structural Mechanics (CSM) testbed, and to extend the techniques for use on multiprocessor architectures.

Blue to Green: How Past Energy Transitions Inform the Department of Defense’s Energy Strategy

DTIC Science & Technology

2012-06-01

www.netl.doe.gov/technologies/coalpower/ gasification /gasifipedia/5-support/5- 11_ftsynthesis.html (accessed March 19, 2012) 245 Biomass feedstock can be...fuels from renewable fuel sources. The two methods that are currently the furthest developed are Fischer-Tropsch (FT) synthesis ( biomass to liquid...years of isolation brought on by apartheid.244 In the FT synthesis process proposed by renewable energy developers today, biomass feedstock is heated

Extraction, bioavailability, and bioefficacy of capsaicinoids.

PubMed

Lu, Muwen; Ho, Chi-Tang; Huang, Qingrong

2017-01-01

Capsaicinoids are active constituents responsible for the pungent and spicy flavor in chili peppers. During the past few decades, various extraction methods of capsaicinoids from peppers have been developed with high yields. Through biological studies, pharmacological benefits have been reported such as pain relief, antiinflammation, anticancer, cardio-protection, as well as weight loss. In this paper, the extraction methods and bioavailability of capsaicinoids are reviewed and discussed. In addition, the pharmacological effects and their underlying mechanisms are also studied. Copyright © 2016. Published by Elsevier B.V.

History, research and practice of forensic anthropology in Thailand.

PubMed

Traithepchanapai, Pongpon; Mahakkanukrauh, Pasuk; Kranioti, Elena F

2016-04-01

Forensic anthropology is an increasingly developing discipline born about a century ago in the United States with the objective to contribute the knowledge of bone biology and physical anthropology to the emerging needs of the court of law. The development of research in biological and forensic anthropology has made rapid progress worldwide in the past few years, however, in most countries--with the exception of the United States--forensic anthropology work is still considered within the duties of the forensic pathologist. This paper attempts to summarise the history and development of forensic anthropology in Thailand by providing information on past and current research and practice that can help forensic practitioners to apply existing methods in forensic cases and mass disasters. It is hoped that the lessons learned from the tsunami catastrophe and the emerging need for positive identification in medicolegal settings will lead to rapid advances in education, training and professional engagement of anthropologists from the forensic departments and the law enforcement agencies in Thailand. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

[When history meets molecular medicine: molecular history of human tuberculosis].

PubMed

Ottini, Laura; Falchetti, Mario

2010-01-01

Tuberculosis represents one of the humankind's most socially devastating diseases. Despite a long history of medical research and the development of effective therapies, this disease remains a global health danger even in the 21st century. Tuberculosis may cause death but infected people with effective immunity may remain healthy for years, suggesting long-term host-pathogen co-existence. Because of its antiquity, a supposed association with human settlements and the tendency to leave typical lesions on skeletal and mummified remains, tuberculosis has been the object of intensive multidisciplinary studies, including paleo-pathological research. During the past 10 years molecular paleo-pathology developed as a new scientific discipline allowing the study of ancient pathogens by direct detection of their DNA. In this work, we reviewed evidences for tuberculosis in ancient human remains, current methods for identifying ancient mycobacterial DNA and explored current theories of Mycobacterium tuberculosis evolution and their implications in the global development of tuberculosis looking into the past and present at the same time.

A promise kept.

PubMed

Harper, W James

2010-01-01

This article is largely biographical and relates to my experiences of the past 67 years in research and teaching, both of equal importance in my life. I was fortunate to start at the beginning of the development of instrumental methods of analysis and have eagerly embraced each new methodology as it became available. This paper is dedicated to all those students and colleagues who taught me much and whose efforts are mainly responsible for what has been accomplished in our work with food science and technology. The research focused primarily on trying to find out the "why" behind the problems that food, and especially the dairy products area, encountered over the past 65 years. The teaching has tried to foster thinking and problem solving.

A Survey of the Methods Developed in the National Coal Board's Pneumoconiosis Field Research for Correlating Environmental Exposure with Medical Condition

PubMed Central

Fay, J. W. J.; Ashford, J. R.

1961-01-01

The correlation of the medical and environmental data (i.e. the derivation of the dosage-response relationship) in a study such as the National Coal Board's Pneumoconiosis Field Research (P.F.R.) is subject to many complicating factors compared with the more conventional types of biological assay. Several methods have been developed within the Research to overcome these difficulties, and the new procedures are described. Each is concerned with the estimation of the direct relation between the radiological abnormality associated with simple pneumoconiosis and some single measure of the past hazard, but the basic techniques are sufficiently general to be applicable in other fields of study. The first development involves the definition of an underlying continuous scale of radiological abnormality. This prepares the way for the derivation of the “quantitative” relation between exposure and response, to replace the “semi-quantal” relation which is inherent in the use of a small number of discrete categories of radiological abnormality. The effect of errors of observation of dosage and response on the corresponding quantitative and quantal relationships is then determined. The second development concerns the use of a “multi-dimensional” representation of past hazard. Most of the men under observation had worked in a number of different mining occupations before their first chest radiograph was taken, but this exposure cannot be assessed in terms of dust concentrations, for which reliable data are not available. Nevertheless, it is shown that past hazard can usefully be represented by three “dimensions” corresponding to the periods spent in three main types of environment—(a) the coal-face (coal-getting shift), (b) the coal-face (preparation shift) and (c) elsewhere underground. Each man's past exposure up to the time of his first chest radiograph can be expressed in terms of these three dimensions and the effect of each environment separately can be determined. The third development extends the multi-dimensional approach to cover not only the working history before the first medical examination, but also the recorded exposure (in terms of measured dust concentrations), to which each man has been subject between the first and subsequent “follow-up” surveys. This measured exposure is regarded as one dimension of the man's total exposure up to the time of his second (or later) examination, and it is possible in this way to determine the direct relation between radiological abnormality and measured exposure, even when this component represents only part of the total hazard to which the man has been subject. The application of the methods is illustrated by the analysis of some of the data which have been obtained in the Pneumoconiosis Field Research. PMID:13698432

Factors influencing the intention of women in rural Ghana to adopt postpartum family planning.

PubMed

Eliason, Sebastian; Baiden, Frank; Quansah-Asare, Gloria; Graham-Hayfron, Yvonne; Bonsu, Derek; Phillips, James; Awusabo-Asare, Kofi

2013-07-22

Uptake of postpartum family planning (PPFP) remains low in sub-Saharan Africa and very little is known about how pregnant women arrive at their decisions to adopt PPFP. This information is needed to guide the development of interventions to promote PPFP. We conducted a survey among pregnant women attending antenatal clinics in a rural district in Ghana. We used univariate and multivariate logistic regression analysis to explore how knowledge of various family planning (FP) methods, past experience with their use and the acceptability of PPFP to male partners and close relations influenced the intention of pregnant women to adopt PPFP. We interviewed 1914 pregnant women in four health facilities. About 84% considered PPFP acceptable, and 70% intended to adopt a method. The most preferred methods were injectables (31.5%), exclusive breastfeeding (16.7%), and oral contraceptive pills (14.8%). Women whose first choice of PPFP method were injectables were more likely to be women who had had past experience with its use (O.R = 2.07, 95% C.I. 1.50-2.87). Acceptability of PPFP by the pregnant woman (O.R. = 3.21, 1.64-6.26), perception of partner acceptability (O.R. = 3.20, 1.94-5.48), having had prior experience with the use of injectables (O.R. = 3.72, 2.61-5.30) were the strongest predictors of the intention to adopt PPFP. Conversely women who knew about the diaphragm (O.R. = 0.59, 0.38-0.93) and those who had past experience with IUD use (O.R. = 0.13, 0.05-0.38) were less likely to want to adopt PPFP. Acceptability of PPFP to the pregnant woman, male partner approval, and past experience with the use of injectables are important factors in the PPFP decisions of women in this population. Antenatal and early postnatal care need to be adapted to take these factors into consideration.

Redundant actuator development study. [flight control systems for supersonic transport aircraft

NASA Technical Reports Server (NTRS)

Ryder, D. R.

1973-01-01

Current and past supersonic transport configurations are reviewed to assess redundancy requirements for future airplane control systems. Secondary actuators used in stability augmentation systems will probably be the most critical actuator application and require the highest level of redundancy. Two methods of actuator redundancy mechanization have been recommended for further study. Math models of the recommended systems have been developed for use in future computer simulations. A long range plan has been formulated for actuator hardware development and testing in conjunction with the NASA Flight Simulator for Advanced Aircraft.

Precision Editing of Large Animal Genomes

PubMed Central

Tan, Wenfang (Spring); Carlson, Daniel F.; Walton, Mark W.; Fahrenkrug, Scott C.; Hackett, Perry B.

2013-01-01

Transgenic animals are an important source of protein and nutrition for most humans and will play key roles in satisfying the increasing demand for food in an ever-increasing world population. The past decade has experienced a revolution in the development of methods that permit the introduction of specific alterations to complex genomes. This precision will enhance genome-based improvement of farm animals for food production. Precision genetics also will enhance the development of therapeutic biomaterials and models of human disease as resources for the development of advanced patient therapies. PMID:23084873

Enzyme-free ethanol sensor based on electrospun nickel nanoparticle-loaded carbon fiber paste electrode.

PubMed

Liu, Yang; Zhang, Lei; Guo, Qiaohui; Hou, Haoqing; You, Tianyan

2010-03-24

We have developed a novel nickel nanoparticle-loaded carbon fiber paste (NiCFP) electrode for enzyme-free determination of ethanol. An electrospinning technique was used to prepare the NiCF composite with large amounts of spherical nanoparticles firmly embedded in carbon fibers (CF). In application to electroanalysis of ethanol, the NiCFP electrode exhibited high amperometric response and good operational stability. The calibration curve was linear up to 87.5 mM with a detection limit of 0.25 mM, which is superior to that obtained with other transition metal based electrodes. For detection of ethanol present in liquor samples, the values obtained with the NiCFP electrode were in agreement with the ones declared on the label. The attractive analytical performance and simple preparation method make this novel material promising for the development of effective enzyme-free sensors. Copyright 2010 Elsevier B.V. All rights reserved.

The Past Achievements and Future Promises of Developmental Psychopathology: The Coming of Age of a Discipline

PubMed Central

Cicchetti, Dante; Toth, Sheree L.

2012-01-01

Over the past decades, developmental psychopathology has coalesced into a discipline that has made significant contributions toward the understanding of risk, psychopathology, and resilience in individuals across the life course. The overarching goal of the discipline has been to elucidate the interplay among biological, psychological, and social-contextual aspects of normal and abnormal development. In addition to directing efforts toward bridging fields of study and aiding in elucidating important truths about the processes underlying adaptation and maladaptation, investigators in developmental psychopathology have been equally devoted to developing and evaluating methods for preventing and ameliorating maladaptive and psychopathological outcomes. Increasingly, efforts are being made to conduct investigations at multiple levels of analysis and to translate basic research knowledge into real world contexts. In this article, the contributions, challenges, and future directions of the field are highlighted. PMID:19175810

Object-Based Retro-Classification Of A Agricultural Land Use: A Case Study Of Irrigated Croplands

NASA Astrophysics Data System (ADS)

Dubovyk, Olena; Conrad, Christopher; Khamzina, Asia; Menz, Gunter

2013-12-01

Availability of the historical crop maps is necessary for the assessment of land management practices and their effectiveness, as well as monitoring of environmental impacts of land uses. Lack of accurate current and past land-use information forestalls assessment of the occurred changes and their consequences and, thus, complicates knowledge-driven agrarian policy development. At the same time, lack of the sampling dataset for the past years often restrict mapping of historical land use. We proposed a methodology for a retro-assessment of several crops, based on multitemporal Landsat 5 TM imagery and a limited sampling dataset. The overall accuracy of the retro-map was 81% while accuracies for specific crop classes varied from 60% to 93%. If further elaborated, the developed method could be a useful tool for the generation of historical data on agricultural land use.

[Scenario analysis--a method for long-term planning].

PubMed

Stavem, K

2000-01-10

Scenarios are known from the film industry, as detailed descriptions of films. This has given name to scenario analysis, a method for long term planning using descriptions of composite future pictures. This article is an introduction to the scenario method. Scenarios describe plausible, not necessarily probable, developments. They focus on problems and questions that decision makers must be aware of and prepare to deal with, and the consequences of alternative decisions. Scenarios are used in corporate and governmental planning, and they can be useful and complementary to traditional planning and extrapolation of past experience. The method is particularly useful in a rapidly changing world with shifting external conditions.

Interplay between past market correlation structure changes and future volatility outbursts.

PubMed

Musmeci, Nicoló; Aste, Tomaso; Di Matteo, T

2016-11-18

We report significant relations between past changes in the market correlation structure and future changes in the market volatility. This relation is made evident by using a measure of "correlation structure persistence" on correlation-based information filtering networks that quantifies the rate of change of the market dependence structure. We also measured changes in the correlation structure by means of a "metacorrelation" that measures a lagged correlation between correlation matrices computed over different time windows. Both methods show a deep interplay between past changes in correlation structure and future changes in volatility and we demonstrate they can anticipate market risk variations and this can be used to better forecast portfolio risk. Notably, these methods overcome the curse of dimensionality that limits the applicability of traditional econometric tools to portfolios made of a large number of assets. We report on forecasting performances and statistical significance of both methods for two different equity datasets. We also identify an optimal region of parameters in terms of True Positive and False Positive trade-off, through a ROC curve analysis. We find that this forecasting method is robust and it outperforms logistic regression predictors based on past volatility only. Moreover the temporal analysis indicates that methods based on correlation structural persistence are able to adapt to abrupt changes in the market, such as financial crises, more rapidly than methods based on past volatility.

Interplay between past market correlation structure changes and future volatility outbursts

NASA Astrophysics Data System (ADS)

Musmeci, Nicoló; Aste, Tomaso; Di Matteo, T.

2016-11-01

We report significant relations between past changes in the market correlation structure and future changes in the market volatility. This relation is made evident by using a measure of “correlation structure persistence” on correlation-based information filtering networks that quantifies the rate of change of the market dependence structure. We also measured changes in the correlation structure by means of a “metacorrelation” that measures a lagged correlation between correlation matrices computed over different time windows. Both methods show a deep interplay between past changes in correlation structure and future changes in volatility and we demonstrate they can anticipate market risk variations and this can be used to better forecast portfolio risk. Notably, these methods overcome the curse of dimensionality that limits the applicability of traditional econometric tools to portfolios made of a large number of assets. We report on forecasting performances and statistical significance of both methods for two different equity datasets. We also identify an optimal region of parameters in terms of True Positive and False Positive trade-off, through a ROC curve analysis. We find that this forecasting method is robust and it outperforms logistic regression predictors based on past volatility only. Moreover the temporal analysis indicates that methods based on correlation structural persistence are able to adapt to abrupt changes in the market, such as financial crises, more rapidly than methods based on past volatility.

Interplay between past market correlation structure changes and future volatility outbursts

PubMed Central

Musmeci, Nicoló; Aste, Tomaso; Di Matteo, T.

2016-01-01

We report significant relations between past changes in the market correlation structure and future changes in the market volatility. This relation is made evident by using a measure of “correlation structure persistence” on correlation-based information filtering networks that quantifies the rate of change of the market dependence structure. We also measured changes in the correlation structure by means of a “metacorrelation” that measures a lagged correlation between correlation matrices computed over different time windows. Both methods show a deep interplay between past changes in correlation structure and future changes in volatility and we demonstrate they can anticipate market risk variations and this can be used to better forecast portfolio risk. Notably, these methods overcome the curse of dimensionality that limits the applicability of traditional econometric tools to portfolios made of a large number of assets. We report on forecasting performances and statistical significance of both methods for two different equity datasets. We also identify an optimal region of parameters in terms of True Positive and False Positive trade-off, through a ROC curve analysis. We find that this forecasting method is robust and it outperforms logistic regression predictors based on past volatility only. Moreover the temporal analysis indicates that methods based on correlation structural persistence are able to adapt to abrupt changes in the market, such as financial crises, more rapidly than methods based on past volatility. PMID:27857144

Value, Cost, and Sharing: Open Issues in Constrained Clustering

NASA Technical Reports Server (NTRS)

Wagstaff, Kiri L.

2006-01-01

Clustering is an important tool for data mining, since it can identify major patterns or trends without any supervision (labeled data). Over the past five years, semi-supervised (constrained) clustering methods have become very popular. These methods began with incorporating pairwise constraints and have developed into more general methods that can learn appropriate distance metrics. However, several important open questions have arisen about which constraints are most useful, how they can be actively acquired, and when and how they should be propagated to neighboring points. This position paper describes these open questions and suggests future directions for constrained clustering research.

Studying depression using imaging and machine learning methods.

PubMed

Patel, Meenal J; Khalaf, Alexander; Aizenstein, Howard J

2016-01-01

Depression is a complex clinical entity that can pose challenges for clinicians regarding both accurate diagnosis and effective timely treatment. These challenges have prompted the development of multiple machine learning methods to help improve the management of this disease. These methods utilize anatomical and physiological data acquired from neuroimaging to create models that can identify depressed patients vs. non-depressed patients and predict treatment outcomes. This article (1) presents a background on depression, imaging, and machine learning methodologies; (2) reviews methodologies of past studies that have used imaging and machine learning to study depression; and (3) suggests directions for future depression-related studies.

Invited Review Article: Tip modification methods for tip-enhanced Raman spectroscopy (TERS) and colloidal probe technique: A 10 year update (2006-2016) review

NASA Astrophysics Data System (ADS)

Yuan, C. C.; Zhang, D.; Gan, Y.

2017-03-01

Engineering atomic force microscopy tips for reliable tip enhanced Raman spectroscopy (TERS) and colloidal probe technique are becoming routine practices in many labs. In this 10 year update review, various new tip modification methods developed over the past decade are briefly reviewed to help researchers select the appropriate method. The perspective is put in a large context to discuss the opportunities and challenges in this area, including novel combinations of seemingly different methods, potential applications of some methods which were not originally intended for TERS tip fabrication, and the problems of high cost and poor reproducibility of tip fabrication.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fazalare, R.W.; Hayes, S.J.

One decision hydro project designers and developers make when building a new facility is what method to use to embed the turbine spiral case in the powerhouse concrete. The type of technique chosen often is based on the long-standing practice or individual preference of the plant owner. However, according to a recent industry survey, any method can be used successfully if proper design and installation procedures are followed. Although pressurized embedment has been the prominent method in the past, especially in the US, the bare deflated casing method is gaining popularity throughout the world because it can reduce cost andmore » construction time. This method has been the primary technique used with apparent success in Japan and Scandinavia.« less

Progress in computational toxicology.

PubMed

Ekins, Sean

2014-01-01

Computational methods have been widely applied to toxicology across pharmaceutical, consumer product and environmental fields over the past decade. Progress in computational toxicology is now reviewed. A literature review was performed on computational models for hepatotoxicity (e.g. for drug-induced liver injury (DILI)), cardiotoxicity, renal toxicity and genotoxicity. In addition various publications have been highlighted that use machine learning methods. Several computational toxicology model datasets from past publications were used to compare Bayesian and Support Vector Machine (SVM) learning methods. The increasing amounts of data for defined toxicology endpoints have enabled machine learning models that have been increasingly used for predictions. It is shown that across many different models Bayesian and SVM perform similarly based on cross validation data. Considerable progress has been made in computational toxicology in a decade in both model development and availability of larger scale or 'big data' models. The future efforts in toxicology data generation will likely provide us with hundreds of thousands of compounds that are readily accessible for machine learning models. These models will cover relevant chemistry space for pharmaceutical, consumer product and environmental applications. Copyright © 2013 Elsevier Inc. All rights reserved.

Trace level and highly selective determination of urea in various real samples based upon voltammetric analysis of diacetylmonoxime-urea reaction product on the carbon nanotube/carbon paste electrode.

PubMed

Alizadeh, Taher; Ganjali, Mohammad Reza; Rafiei, Faride

2017-06-29

In this study an innovative method was introduced for selective and precise determination of urea in various real samples including urine, blood serum, soil and water. The method was based on the square wave voltammetry determination of an electroactive product, generated during diacetylmonoxime reaction with urea. A carbon paste electrode, modified with multi-walled carbon nanotubes (MWCNTs) was found to be an appropriate electrochemical transducer for recording of the electrochemical signal. It was found that the chemical reaction conditions influenced the analytical signal directly. The calibration graph of the method was linear in the range of 1 × 10 -7 - 1 × 10 -2  mol L -1 . The detection limit was calculated to be 52 nmol L -1 . Relative standard error of the method was also calculated to be 3.9% (n = 3). The developed determination procedure was applied for urea determination in various real samples including soil, urine, plasma and water samples. Copyright © 2017 Elsevier B.V. All rights reserved.

Analysis of Longitudinal Studies With Repeated Outcome Measures: Adjusting for Time-Dependent Confounding Using Conventional Methods.

PubMed

Keogh, Ruth H; Daniel, Rhian M; VanderWeele, Tyler J; Vansteelandt, Stijn

2018-05-01

Estimation of causal effects of time-varying exposures using longitudinal data is a common problem in epidemiology. When there are time-varying confounders, which may include past outcomes, affected by prior exposure, standard regression methods can lead to bias. Methods such as inverse probability weighted estimation of marginal structural models have been developed to address this problem. However, in this paper we show how standard regression methods can be used, even in the presence of time-dependent confounding, to estimate the total effect of an exposure on a subsequent outcome by controlling appropriately for prior exposures, outcomes, and time-varying covariates. We refer to the resulting estimation approach as sequential conditional mean models (SCMMs), which can be fitted using generalized estimating equations. We outline this approach and describe how including propensity score adjustment is advantageous. We compare the causal effects being estimated using SCMMs and marginal structural models, and we compare the two approaches using simulations. SCMMs enable more precise inferences, with greater robustness against model misspecification via propensity score adjustment, and easily accommodate continuous exposures and interactions. A new test for direct effects of past exposures on a subsequent outcome is described.

Solar radiation and forest fuel moisture

Treesearch

George M. Byram; George M. Jemison

1943-01-01

A major contribution to progress in forest fire prevention and control during the past 10 years has been the development and widespread application of methods of rating forest fire danger. Fire danger rating systems are now in use in all the forest regions of the United States. They have been described by Gisborne, Brown and Davis, Curry et al., Matthews, Jemison, and...

Understanding Turkish Students' Preferences for Distance Education Depending on Financial Circumstances: A Large-Scale CHAID Analysis

ERIC Educational Resources Information Center

Firat, Mehmet

2017-01-01

In the past, distance education was used as a method to meet the educational needs of citizens with limited options to attend an institution of higher education. Nowadays, it has become irreplaceable in higher education thanks to developments in instructional technology. But the question of why students choose distance education is still…

Chapter 10 - Using simulation modeling to assess historical reference conditions for vegetation and fire regimes for the LANDFIRE Prototype Project

Treesearch

Sarah Pratt; Lisa Holsinger; Robert E. Keane

2006-01-01

A critical component of the Landscape Fire and Resource Management Planning Tools Prototype Project, or LANDFIRE Prototype Project, was the development of a nationally consistent method for estimating historical reference conditions for vegetation composition and structure and wildland fire regimes. These estimates of past vegetation composition and condition are used...

New methods for measuring atmospheric heavy noble gas isotope and elemental ratios in ice core samples.

PubMed

Bereiter, Bernhard; Kawamura, Kenji; Severinghaus, Jeffrey P

2018-05-30

The global ocean constitutes the largest heat buffer in the global climate system, but little is known about its past changes. The isotopic and elemental ratios of heavy noble gases (krypton and xenon), together with argon and nitrogen in trapped air from ice cores, can be used to reconstruct past mean ocean temperatures (MOTs). Here we introduce two successively developed methods to measure these parameters with a sufficient precision to provide new constraints on past changes in MOT. The air from an 800-g ice sample - containing roughly 80 mL STP air - is extracted and processed to be analyzed on two independent dual-inlet isotope ratio mass spectrometers. The primary isotope ratios (δ 15 N, δ 40 Ar and δ 86 Kr values) are obtained with precisions in the range of 1 per meg (0.001‰) per mass unit. The three elemental ratio values δKr/N 2 , δXe/N 2 and δXe/Kr are obtained using sequential (non-simultaneous) peak-jumping, reaching precisions in the range of 0.1-0.3‰. The latest version of the method achieves a 30% to 50% better precision on the elemental ratios and a twofold better sample throughput than the previous one. The method development uncovered an unexpected source of artefactual gas fractionation in a closed system that is caused by adiabatic cooling and warming of gases (termed adiabatic fractionation) - a potential source of measurement artifacts in other methods. The precisions of the three elemental ratios δKr/N 2 , δXe/N 2 and δXe/Kr - which all contain the same MOT information - suggest smaller uncertainties for reconstructed MOTs (±0.3-0.1°C) than previous studies have attained. Due to different sensitivities of the noble gases to changes in MOT, δXe/N 2 provides the best constraints on the MOT under the given precisions followed by δXe/Kr, and δKr/N 2 ; however, using all of them helps to detect methodological artifacts and issues with ice quality. Copyright © 2018 John Wiley & Sons, Ltd.

ISMB 2016 offers outstanding science, networking, and celebration

PubMed Central

Fogg, Christiana

2016-01-01

The annual international conference on Intelligent Systems for Molecular Biology (ISMB) is the major meeting of the International Society for Computational Biology (ISCB). Over the past 23 years the ISMB conference has grown to become the world's largest bioinformatics/computational biology conference. ISMB 2016 will be the year's most important computational biology event globally. The conferences provide a multidisciplinary forum for disseminating the latest developments in bioinformatics/computational biology. ISMB brings together scientists from computer science, molecular biology, mathematics, statistics and related fields. Its principal focus is on the development and application of advanced computational methods for biological problems. ISMB 2016 offers the strongest scientific program and the broadest scope of any international bioinformatics/computational biology conference. Building on past successes, the conference is designed to cater to variety of disciplines within the bioinformatics/computational biology community.  ISMB 2016 takes place July 8 - 12 at the Swan and Dolphin Hotel in Orlando, Florida, United States. For two days preceding the conference, additional opportunities including Satellite Meetings, Student Council Symposium, and a selection of Special Interest Group Meetings and Applied Knowledge Exchange Sessions (AKES) are all offered to enable registered participants to learn more on the latest methods and tools within specialty research areas. PMID:27347392

ISMB 2016 offers outstanding science, networking, and celebration.

PubMed

Fogg, Christiana

2016-01-01

The annual international conference on Intelligent Systems for Molecular Biology (ISMB) is the major meeting of the International Society for Computational Biology (ISCB). Over the past 23 years the ISMB conference has grown to become the world's largest bioinformatics/computational biology conference. ISMB 2016 will be the year's most important computational biology event globally. The conferences provide a multidisciplinary forum for disseminating the latest developments in bioinformatics/computational biology. ISMB brings together scientists from computer science, molecular biology, mathematics, statistics and related fields. Its principal focus is on the development and application of advanced computational methods for biological problems. ISMB 2016 offers the strongest scientific program and the broadest scope of any international bioinformatics/computational biology conference. Building on past successes, the conference is designed to cater to variety of disciplines within the bioinformatics/computational biology community.  ISMB 2016 takes place July 8 - 12 at the Swan and Dolphin Hotel in Orlando, Florida, United States. For two days preceding the conference, additional opportunities including Satellite Meetings, Student Council Symposium, and a selection of Special Interest Group Meetings and Applied Knowledge Exchange Sessions (AKES) are all offered to enable registered participants to learn more on the latest methods and tools within specialty research areas.

Novel strategies for controlling Streptococcus pyogenes infection and associated diseases: from potential peptide vaccines to antibody immunotherapy.

PubMed

Pandey, Manisha; Sekuloski, Silvana; Batzloff, Michael R

2009-07-01

Infections caused by group A streptococcus (GAS) represent a public health problem in both developing and developed countries. The current available methods of prevention are either inadequate or ineffective, which is highlighted by the resurgence in invasive GAS infections over the past two decades. The management of GAS and associated diseases requires new and improved approaches. This review discusses various potential approaches in controlling GAS infections, ranging from prophylactic vaccines to antibody immunotherapy.

Recent Trends in Quantum Chemical Modeling of Enzymatic Reactions.

PubMed

Himo, Fahmi

2017-05-24

The quantum chemical cluster approach is a powerful method for investigating enzymatic reactions. Over the past two decades, a large number of highly diverse systems have been studied and a great wealth of mechanistic insight has been developed using this technique. This Perspective reviews the current status of the methodology. The latest technical developments are highlighted, and challenges are discussed. Some recent applications are presented to illustrate the capabilities and progress of this approach, and likely future directions are outlined.

[Environmental Hazards Assessment Program annual report, June 1992--June 1993]. Use of diatom distributions to monitor environmental health

DOE Office of Scientific and Technical Information (OSTI.GOV)

Levine, R.H.

1993-12-01

A variety of approaches has been used in the past to assess the environmental impact of anthropogenic contaminants. One reliable index for aquatic environments is the analysis of diatom species distribution; the focus in this case being on the Savannah River. The completed objectives of this study were: (A) the development and use of procedures for measuring diatom distribution in the water column and (B) the development and evaluation of sediment sampling methods for retrospective analysis.

The Serpent Monte Carlo Code: Status, Development and Applications in 2013

NASA Astrophysics Data System (ADS)

Leppänen, Jaakko; Pusa, Maria; Viitanen, Tuomas; Valtavirta, Ville; Kaltiaisenaho, Toni

2014-06-01

The Serpent Monte Carlo reactor physics burnup calculation code has been developed at VTT Technical Research Centre of Finland since 2004, and is currently used in 100 universities and research organizations around the world. This paper presents the brief history of the project, together with the currently available methods and capabilities and plans for future work. Typical user applications are introduced in the form of a summary review on Serpent-related publications over the past few years.

Development and implementation of an audit tool for quality control of parenteral nutrition.

PubMed

García-Rodicio, Sonsoles; Abajo, Celia; Godoy, Mercedes; Catalá, Miguel Angel

2009-01-01

The aim of this article is to describe the development of a quality control methodology applied to patients receiving parenteral nutrition (PN) and to present the results obtained over the past 10 years. Development of the audit tool: In 1995, a total of 13 PN quality criteria and their standards were defined based on literature and past experiences. They were applied during 5 different 6-month audits carried out in subsequent years. According to the results of each audit, the criteria with lower validity were eliminated, while others were optimized and new criteria were introduced to complete the monitoring of other areas not previously examined. Currently, the quality control process includes 22 quality criteria and their standards that examine the following 4 different areas: (1) indication and duration of PN; (2) nutrition assessment, adequacy of the nutrition support, and monitoring; (3) metabolic and infectious complications; and (4) global efficacy of the nutrition support regimen. The authors describe the current definition of each criterion and present the results obtained in the 5 audits performed. In the past year, 9 of the 22 criteria reached the predefined standards. The areas detected for further improvements were: indication for PN, nutrition assessment, and management of catheter infections. The definition of quality criteria and their standards is an efficient method of providing a qualitative and quantitative analysis of the clinical care of patients receiving PN. It detects areas for improvement and assists in developing a methodology to work efficiently.

Dietary fibre: challenges in production and use of food composition data.

PubMed

Westenbrink, Susanne; Brunt, Kommer; van der Kamp, Jan-Willem

2013-10-01

Dietary fibre is a heterogeneous group of components for which several definitions and analytical methods were developed over the past decades, causing confusion among users and producers of dietary fibre data in food composition databases. An overview is given of current definitions and analytical methods. Some of the issues related to maintaining dietary fibre values in food composition databases are discussed. Newly developed AOAC methods (2009.01 or modifications) yield higher dietary fibre values, due to the inclusion of low molecular weight dietary fibre and resistant starch. For food composition databases procedures need to be developed to combine 'classic' and 'new' dietary fibre values since re-analysing all foods on short notice is impossible due to financial restrictions. Standardised value documentation procedures are important to evaluate dietary fibre values from several sources before exchanging and using the data, e.g. for dietary intake research. Copyright © 2012 Elsevier Ltd. All rights reserved.

[Genome editing of industrial microorganism].

PubMed

Zhu, Linjiang; Li, Qi

2015-03-01

Genome editing is defined as highly-effective and precise modification of cellular genome in a large scale. In recent years, such genome-editing methods have been rapidly developed in the field of industrial strain improvement. The quickly-updating methods thoroughly change the old mode of inefficient genetic modification, which is "one modification, one selection marker, and one target site". Highly-effective modification mode in genome editing have been developed including simultaneous modification of multiplex genes, highly-effective insertion, replacement, and deletion of target genes in the genome scale, cut-paste of a large DNA fragment. These new tools for microbial genome editing will certainly be applied widely, and increase the efficiency of industrial strain improvement, and promote the revolution of traditional fermentation industry and rapid development of novel industrial biotechnology like production of biofuel and biomaterial. The technological principle of these genome-editing methods and their applications were summarized in this review, which can benefit engineering and construction of industrial microorganism.

Gender Development Research in Sex Roles: Historical Trends and Future Directions.

PubMed

Zosuls, Kristina M; Miller, Cindy Faith; Ruble, Diane N; Martin, Carol Lynn; Fabes, Richard A

2011-06-01

The late 1960s through the 1970s marked an important turning point in the field of gender research, including theory and research in gender development. The establishment of Sex Roles in 1975 as a forum for this research represented an important milestone in the field. In this article, we celebrate the 35th anniversary of Sex Roles and, in particular, its contributions to the field of research on children's and adolescents' gender development. We examine the trends in research on gender development published in Sex Roles since its inception and use this analysis as a vehicle for exploring how the field has grown and evolved over the past few decades. We begin with a brief review of the history of this field of research since 1975. Then, we present a descriptive assessment of articles published on gender development in Sex Roles over time, and link this assessment to general trends that have occurred in the study of gender development over the past 35 years. We conclude with a discussion of future directions for the field of gender development. In particular, we highlight areas in which the journal could play a role in promoting more diversity in topics, methods, and ages employed in gender development research.

Gender Development Research in Sex Roles: Historical Trends and Future Directions

PubMed Central

Miller, Cindy Faith; Ruble, Diane N.; Martin, Carol Lynn; Fabes, Richard A.

2011-01-01

The late 1960s through the 1970s marked an important turning point in the field of gender research, including theory and research in gender development. The establishment of Sex Roles in 1975 as a forum for this research represented an important milestone in the field. In this article, we celebrate the 35th anniversary of Sex Roles and, in particular, its contributions to the field of research on children’s and adolescents’ gender development. We examine the trends in research on gender development published in Sex Roles since its inception and use this analysis as a vehicle for exploring how the field has grown and evolved over the past few decades. We begin with a brief review of the history of this field of research since 1975. Then, we present a descriptive assessment of articles published on gender development in Sex Roles over time, and link this assessment to general trends that have occurred in the study of gender development over the past 35 years. We conclude with a discussion of future directions for the field of gender development. In particular, we highlight areas in which the journal could play a role in promoting more diversity in topics, methods, and ages employed in gender development research. PMID:21747580

Toxicity and bioaccumulation of sediment-associated contaminants using freshwater invertebrates: A review of methods and applications

USGS Publications Warehouse

Ingersoll, C.G.; Ankley, G.T.; Benoit, D.A.; Brunson, E.L.; Burton, G.A.; Dwyer, F.J.; Hoke, R.A.; Landrum, P.F.; Norberg-King, T. J.; Winger, P.V.

1995-01-01

This paper reviews recent developments in methods for evaluating the toxicity and bioaccumulation of contaminants associated with freshwater sediments and summarizes example case studies demonstrating the application of these methods. Over the past decade, research has emphasized development of more specific testing procedures for conducting 10-d toxicity tests with the amphipod Hyalella azteca and the midge Chironomus tentans. Toxicity endpoints measured in these tests are survival for H. azteca and survival and growth for C. tentans. Guidance has also been developed for conducting 28-d bioaccumulation tests with the oligochaete Lumbriculus variegatus, including determination of bioaccumulation kinetics for different compound classes. These methods have been applied to a variety of sediments to address issues ranging from site assessments to bioavailability of organic and inorganic contaminants using field-collected and laboratory-spiked samples. Survival and growth of controls routinely meet or exceed test acceptability criteria. Results of laboratory bioaccumulation studies with L. variegatus have been confirmed with comparisons to residues (PCBs, PAHs, DDT) present from synoptically collected field populations of oligochaetes. Additional method development is currently underway to develop chronic toxicity tests and to provide additional data-confirming responses observed in laboratory sediment tests with natural benthic populations.

Development of iterative techniques for the solution of unsteady compressible viscous flows

NASA Technical Reports Server (NTRS)

Sankar, Lakshmi N.; Hixon, Duane

1992-01-01

The development of efficient iterative solution methods for the numerical solution of two- and three-dimensional compressible Navier-Stokes equations is discussed. Iterative time marching methods have several advantages over classical multi-step explicit time marching schemes, and non-iterative implicit time marching schemes. Iterative schemes have better stability characteristics than non-iterative explicit and implicit schemes. In this work, another approach based on the classical conjugate gradient method, known as the Generalized Minimum Residual (GMRES) algorithm is investigated. The GMRES algorithm has been used in the past by a number of researchers for solving steady viscous and inviscid flow problems. Here, we investigate the suitability of this algorithm for solving the system of non-linear equations that arise in unsteady Navier-Stokes solvers at each time step.

The effect of calcium hydroxide on the antibiotic component of Odontopaste and Ledermix paste.

PubMed

Athanassiadis, M; Jacobsen, N; Nassery, K; Parashos, P

2013-06-01

To investigate the chemical interaction of calcium hydroxide with the antibiotics demeclocycline calcium in Ledermix Paste and clindamycin hydrochloride in Odontopaste. Validated methods were developed to analyse the interaction of calcium hydroxide in two forms, Pulpdent and calcium hydroxide powder, with the two antibiotics. High-performance liquid chromatography (HPLC) was used to analyse the mixed samples of the pastes and calcium hydroxide. The concentration of demeclocycline calcium over 0-, 1-, 18-, 24-, 72-h and 7-day time-points was determined. The concentration of clindamycin hydrochloride over 1-, 6-, 24-, 72-h and 7-day time-points was determined. All tests with HPLC involved testing of the standard in duplicate alongside the samples. Linearity, precision and specificity of the testing procedures and apparatus were validated. Descriptive statistics are provided. The antibiotics in both Odontopaste and Ledermix Paste were affected by the addition of calcium hydroxide. When mixed with calcium hydroxide powder, Odontopaste had a 2% loss of clindamycin hydrochloride over 7 days, but when mixed with Pulpdent, there was a 36% loss over 7 days. Ledermix Paste showed an 80% loss of demeclocycline calcium over 7 days when mixed with calcium hydroxide powder and a 19% loss when mixed with Pulpdent over the 7-day period. The addition of calcium hydroxide to Odontopaste or Ledermix Paste results in reductions of the respective antibiotic over a 7-day time period. © 2012 International Endodontic Journal. Published by Blackwell Publishing Ltd.

Target detection method by airborne and spaceborne images fusion based on past images

NASA Astrophysics Data System (ADS)

Chen, Shanjing; Kang, Qing; Wang, Zhenggang; Shen, ZhiQiang; Pu, Huan; Han, Hao; Gu, Zhongzheng

2017-11-01

To solve the problem that remote sensing target detection method has low utilization rate of past remote sensing data on target area, and can not recognize camouflage target accurately, a target detection method by airborne and spaceborne images fusion based on past images is proposed in this paper. The target area's past of space remote sensing image is taken as background. The airborne and spaceborne remote sensing data is fused and target feature is extracted by the means of airborne and spaceborne images registration, target change feature extraction, background noise suppression and artificial target feature extraction based on real-time aerial optical remote sensing image. Finally, the support vector machine is used to detect and recognize the target on feature fusion data. The experimental results have established that the proposed method combines the target area change feature of airborne and spaceborne remote sensing images with target detection algorithm, and obtains fine detection and recognition effect on camouflage and non-camouflage targets.

Model-Free Optimal Tracking Control via Critic-Only Q-Learning.

PubMed

Luo, Biao; Liu, Derong; Huang, Tingwen; Wang, Ding

2016-10-01

Model-free control is an important and promising topic in control fields, which has attracted extensive attention in the past few years. In this paper, we aim to solve the model-free optimal tracking control problem of nonaffine nonlinear discrete-time systems. A critic-only Q-learning (CoQL) method is developed, which learns the optimal tracking control from real system data, and thus avoids solving the tracking Hamilton-Jacobi-Bellman equation. First, the Q-learning algorithm is proposed based on the augmented system, and its convergence is established. Using only one neural network for approximating the Q-function, the CoQL method is developed to implement the Q-learning algorithm. Furthermore, the convergence of the CoQL method is proved with the consideration of neural network approximation error. With the convergent Q-function obtained from the CoQL method, the adaptive optimal tracking control is designed based on the gradient descent scheme. Finally, the effectiveness of the developed CoQL method is demonstrated through simulation studies. The developed CoQL method learns with off-policy data and implements with a critic-only structure, thus it is easy to realize and overcome the inadequate exploration problem.

[Projection of prisoner numbers].

PubMed

Metz, Rainer; Sohn, Werner

2015-01-01

The past and future development of occupancy rates in prisons is of crucial importance for the judicial administration of every country. Basic factors for planning the required penal facilities are seasonal fluctuations, minimum, maximum and average occupancy as well as the present situation and potential development of certain imprisonment categories. As the prisoner number of a country is determined by a complex set of interdependent conditions, it has turned out to be difficult to provide any theoretical explanations. The idea accepted in criminology for a long time that prisoner numbers are interdependent with criminal policy must be regarded as having failed. Statistical and time series analyses may help, however, to identify the factors having influenced the development of prisoner numbers in the past. The analyses presented here, first describe such influencing factors from a criminological perspective and then deal with their statistical identification and modelling. Using the development of prisoner numbers in Hesse as an example, it has been found that modelling methods in which the independent variables predict the dependent variable with a time lag are particularly helpful. A potential complication is, however, that for predicting the number of prisoners the different dynamics in German and foreign prisoners require the development of further models.

Medical history and epidemiology: their contribution to the development of public health nursing.

PubMed

Earl, Catherine E

2009-01-01

The nursing profession historically has been involved in data collection in research efforts notably from the time of the Framingham Tuberculosis Project (1914-1923). Over the past century, nurses have become more sophisticated in their abilities to design, conduct, and analyze data. This article discusses the contributions of medicine and epidemiology to the development of public health nursing and the use of statistical methods by nurses in the United States in the 19th and 20th centuries. Knowledge acquired from this article will inform educators and researchers about the importance of using quantitative analysis, evidenced-based knowledge, and statistical methods when teaching students in all health professions.

Computational drug discovery

PubMed Central

Ou-Yang, Si-sheng; Lu, Jun-yan; Kong, Xiang-qian; Liang, Zhong-jie; Luo, Cheng; Jiang, Hualiang

2012-01-01

Computational drug discovery is an effective strategy for accelerating and economizing drug discovery and development process. Because of the dramatic increase in the availability of biological macromolecule and small molecule information, the applicability of computational drug discovery has been extended and broadly applied to nearly every stage in the drug discovery and development workflow, including target identification and validation, lead discovery and optimization and preclinical tests. Over the past decades, computational drug discovery methods such as molecular docking, pharmacophore modeling and mapping, de novo design, molecular similarity calculation and sequence-based virtual screening have been greatly improved. In this review, we present an overview of these important computational methods, platforms and successful applications in this field. PMID:22922346

Development of a multiple-parameter nonlinear perturbation procedure for transonic turbomachinery flows: Preliminary application to design/optimization problems

NASA Technical Reports Server (NTRS)

Stahara, S. S.; Elliott, J. P.; Spreiter, J. R.

1983-01-01

An investigation was conducted to continue the development of perturbation procedures and associated computational codes for rapidly determining approximations to nonlinear flow solutions, with the purpose of establishing a method for minimizing computational requirements associated with parametric design studies of transonic flows in turbomachines. The results reported here concern the extension of the previously developed successful method for single parameter perturbations to simultaneous multiple-parameter perturbations, and the preliminary application of the multiple-parameter procedure in combination with an optimization method to blade design/optimization problem. In order to provide as severe a test as possible of the method, attention is focused in particular on transonic flows which are highly supercritical. Flows past both isolated blades and compressor cascades, involving simultaneous changes in both flow and geometric parameters, are considered. Comparisons with the corresponding exact nonlinear solutions display remarkable accuracy and range of validity, in direct correspondence with previous results for single-parameter perturbations.

Direct ink writing of 3D conductive polyaniline structures and rheological modelling

NASA Astrophysics Data System (ADS)

Holness, F. Benjamin; Price, Aaron D.

2018-01-01

The intractable nature of conjugated polymers (CP) leads to practical limitations in the fabrication of CP-based transducers having complex three-dimensional geometries. Conventional CP device fabrication processes have focused primarily on thin-film deposition techniques; this study explores novel additive manufacturing processes specifically developed for CP with the ultimate goal of increasing the functionality of CP sensors and actuators. Herein we employ automated polymer paste extrusion processes for the direct ink writing of 3D conductive polyaniline (PANI) structures. Realization of these structures was enabled through a modified fused filament fabrication delta robot equipped with an integrated polymer paste extruder to fabricate high-resolution 3D conductive PANI structures. The required processability of PANI was achieved by means of a counterion-induced thermal doping method. The effect of thermal doping on the PANI-DBSA paste by means of a constitutive relationship to describe the paste flow as a function of the thermal doping time is explored. This relationship is incorporated within a flow model to predict the extruded track width as a function of various process parameters including: print speed, gauge pressure, nozzle diameter, and pre-extrusion thermal doping time.

Development of a Multiplex Real-Time PCR for Determination of Apricot in Marzipan Using the Plexor System.

PubMed

Schelm, Stefanie; Haase, Ilka; Fischer, Christin; Fischer, Markus

2017-01-18

Marzipan is a confectionary which is mostly offered in form of filled chocolate, pralines, or pure. According to the German guidelines for oil seeds only almonds, sugar and water are admitted ingredients of marzipan. A product very similar in taste is persipan which is used in the confectionary industry because of its stronger flavor. For persipan production almonds are replaced by debittered apricot or peach kernels. To guarantee high quality products for consumers, German raw paste producers have agreed a limit of apricot kernels in marzipan raw paste of 0.5%. Different DNA-based methods for quantitation of persipan contaminations in marzipan are already published. To increase the detection specificity compared to published intercalation dye-based assays, the present work demonstrate the utilization of a multiplex real-time PCR based on the Plexor technology. Thus, the present work enables the detection of at least 0.1% apricot DNA in almond DNA or less. By analyzing DNA mixtures, the theoretical limit of quantification of the duplex PCR for the quantitation of persipan raw paste DNA in marzipan raw paste DNA was determined as 0.05%.

Chinese literatures of radiation oncology covered by PubMed over the past five years.

PubMed

Niu, Dao-Li; Zhen, Jun-Jie; He, Fen

2010-04-01

PubMed is generally acknowledged for its scientificity in literature coverage and authority of literature retrieval . In recent years, many studies have been published in China about radiation oncology. We aimed to investigate the literatures about radiation oncology in China covered by PubMed over the past five years. We collected primary data by searching the PubMed database using the related subject words. The collected data were analyzed and evaluated by bibliometric methods. In the past five years, 550 articles by Chinese authors related to radiotherapy were indexed in PubMed. These articles were published in 160 journals among 26 Chinese provinces/cities. These articles mainly focused on radiation dose and computer-aided radiation therapy. Sixty-four articles were published by Chinese Journal of Cancer , which ranked the top. Forty-four articles were published by the International Journal of Radiation Oncology Biology Physics (IF=4.29), with the largest number among SCI journals. One hundred and sixteen articles from Guangdong Province were covered, accounting for 21.09%. Over the past five years, the discipline of radiation oncology has been greatly developed. The literatures mainly focus on clinical radiation oncology and their regional distribution is uneven.

Determination of carbohydrates in honey and milk by capillary electrophoresis in combination with graphene-cobalt microsphere hybrid paste electrodes.

PubMed

Liang, Peipei; Sun, Motao; He, Peimin; Zhang, Luyan; Chen, Gang

2016-01-01

A graphene-cobalt microsphere (CoMS) hybrid paste electrode was developed for the determination of carbohydrates in honey and milk in combination with capillary electrophoresis (CE). The performance of the electrodes was demonstrated by detecting mannitol, sucrose, lactose, glucose, and fructose after CE separation. The five analytes were well separated within 9 min in a 40 cm long capillary at a separation voltage of 12 kV. The electrodes exhibited pronounced electrocatalytic activity, lower detection potentials, enhanced signal-to-noise characteristics, and higher reproducibility. The relation between peak current and analyte concentration was linear over about three orders of magnitude. The proposed method had been employed to determine lactose in bovine milk and glucose and fructose in honey with satisfactory results. Because only electroactive substances in the samples could be detected on the paste electrode, the electropherograms of both food samples were simplified to some extent. Copyright © 2015 Elsevier Ltd. All rights reserved.

Recent Development of Techniques and Devices in Colorectal Endoscopic Submucosal Dissection

PubMed Central

Mizutani, Hiroya; Ono, Satoshi; Ohki, Daisuke; Takeuchi, Chihiro; Yakabi, Seiichi; Kataoka, Yosuke; Saito, Itaru; Sakaguchi, Yoshiki; Minatsuki, Chihiro; Tsuji, Yosuke; Niimi, Keiko; Kodashima, Shinya; Yamamichi, Nobutake; Fujishiro, Mitsuhiro; Koike, Kazuhiko

2017-01-01

Colorectal endoscopic submucosal dissection (ESD) is now a well-established endoscopic treatment for early-stage colorectal neoplasms, especially in Asian countries, including Japan. Despite the spread of colorectal ESD, there are still situations in which achieving successful submucosal dissection is difficult. Various novel techniques and devices have been developed to overcome these difficulties, and past reports have shown that some of these strategies can be applied to colorectal ESD. We review several recent developments in the field. The techniques reviewed include the pocket creation method and traction methods and the devices reviewed include the overtube with balloon and electrosurgical knives with water-jet function. These improved techniques and devices can facilitate safer, more reliable ESDs and expand its applicability and acceptability all over the world. PMID:29207854

Knowledge, beliefs and use of nursing methods in preventing pressure sores in Dutch hospitals.

PubMed

Halfens, R J; Eggink, M

1995-02-01

Different methods have been developed in the past to prevent patients from developing pressure sores. The consensus guidelines developed in the Netherlands make a distinction between preventive methods useful for all patients, methods useful only in individual cases, and methods which are not useful at all. This study explores the extent of use of the different methods within Dutch hospitals, and the knowledge and beliefs of nurses regarding the usefulness of these methods. A mail questionnaire was sent to a representative sample of nurses working within Dutch hospitals. A total of 373 questionnaires were returned and used for the analyses. The results showed that many methods judged by the consensus report as not useful, or only useful in individual cases, are still being used. Some methods which are judged as useful, like the use of a risk assessment scale, are used on only a few wards. The opinion of nurses regarding the usefulness of the methods differ from the guidelines of the consensus committee. Although there is agreement about most of the useful methods, there is less agreement about the methods which are useful in individual cases or methods which are not useful at all. In particular the use of massage and cream are, in the opinion of the nurses, useful in individual or in all cases.

New strategies for providing hormonal contraception in developing countries.

PubMed

Townsend, John W; Sitruk-Ware, Regine; Williams, Katherine; Askew, Ian; Brill, Klaus

2011-05-01

Even with progress in increasing access to effective contraception over the past decades, and the growing range of contraceptive methods available on the market, women in developing countries continue to report an unmet need for family planning. This constraint continues to challenge reproductive health policies and programs, while the momentum of population growth and the young age structure in developing countries leads to larger numbers of potential contraceptive users and increasing global demand in contraceptive markets. Of late, there is a renewed focus on increasing access to long-acting hormonal methods to effectively meet this need, establishing and effectively implementing new service delivery strategies. A number of processes have profoundly affected the procurement and use of hormonal contraceptive methods in developing countries: a supportive policy environment, evidence-based practices and an increasing diversity of delivery strategies play a significant part in increasing number of contraceptive users and the demand for hormonal contraception. Copyright © 2011 Elsevier Inc. All rights reserved.

Method and composition in which metal hydride particles are embedded in a silica network

DOEpatents

Heung, Leung K.

1999-01-01

A silica embedded metal hydride composition and a method for making such a composition. The composition is made via the following process: A quantity of fumed silica is blended with water to make a paste. After adding metal hydride particles, the paste is dried to form a solid. According to one embodiment of the invention, the solid is ground into granules for use of the product in hydrogen storage. Alternatively, the paste can be molded into plates or cylinders and then dried for use of the product as a hydrogen filter. Where mechanical strength is required, the paste can be impregnated in a porous substrate or wire network.

Cathodic stripping voltammetric determination of arsenic in sugarcane brandy at a modified carbon nanotube paste electrode.

PubMed

Teixeira, Meryene C; Tavares, Elisângela de F L; Saczk, Adelir A; Okumura, Leonardo L; Cardoso, Maria das Graças; Magriotis, Zuy M; de Oliveira, Marcelo F

2014-07-01

We have developed an eletroanalytical method that employs Cu(2+) solutions to determine arsenic in sugarcane brandy using an electrode consisting of carbon paste modified with carbon nanotubes (CNTPE) and polymeric resins. We used linear sweep (LSV) and differential-pulse (DPV) voltammetry with cathodic stripping for CNTPE containing mineral oil or silicone as binder. The analytical curves were linear from 30 to 110μgL(-1) and from 10 to 110μgL(-1) for LSV and DPV, respectively. The limits of detection (L.O.D.) and quantification (L.O.Q.) of CNTPE were 10.3 and 34.5μgL(-1) for mineral oil and 3.4 and 11.2μgL(-1) for silicone. We applied this method to determine arsenic in five commercial sugarcane brandy samples. The results agreed well with those obtained by hydride generation combined with atomic absorption spectrometry (HG AAS). Copyright © 2014 Elsevier Ltd. All rights reserved.

VIII. THE PAST, PRESENT, AND FUTURE OF DEVELOPMENTAL METHODOLOGY.

PubMed

Little, Todd D; Wang, Eugene W; Gorrall, Britt K

2017-06-01

This chapter selectively reviews the evolution of quantitative practices in the field of developmental methodology. The chapter begins with an overview of the past in developmental methodology, discussing the implementation and dissemination of latent variable modeling and, in particular, longitudinal structural equation modeling. It then turns to the present state of developmental methodology, highlighting current methodological advances in the field. Additionally, this section summarizes ample quantitative resources, ranging from key quantitative methods journal articles to the various quantitative methods training programs and institutes. The chapter concludes with the future of developmental methodology and puts forth seven future innovations in the field. The innovations discussed span the topics of measurement, modeling, temporal design, and planned missing data designs. Lastly, the chapter closes with a brief overview of advanced modeling techniques such as continuous time models, state space models, and the application of Bayesian estimation in the field of developmental methodology. © 2017 The Society for Research in Child Development, Inc.

A numerical investigation of viscous, incompressible flow past an axisymmetric body with and without spin

NASA Astrophysics Data System (ADS)

Weber, K. F.

1985-12-01

This study deals with a preliminary investigation of the effects of spin on the axisymmetric flow past a body of revolution. The study has its genesis larger problem of Magnus forces on spinning bodies at angle of attack. However, the fundamental behavior that arises when a spinning body is placed in a uniform stream is still not well understood; therefore, the problem of axisymmetric flow with spin was undertaken. The body consists of a 3-caliber cant-ogive blunted by a spherical nosecap, a 2-caliber cylindrical section, and a 1-caliber boattail. Numerical solutions of the compressible laminar Navier-Stokes equations are obtained using a modified version of the implicit-explicit method developed by MacCormack in 1981. The benchmark problem is the nonspinning body in uniform flow at a Reynolds number of 1.14. The results show that the modified method performs well and allows time steps that are in order of magnitude greater than those permitted by explicit stability criteria.

USSR Report, Cybernetics, Computers and Automation Technology

DTIC Science & Technology

1987-04-02

Communication Channel (NTR: PROBLEMY I RESHENIYA, No 14, 22 Jul-4 Aug 86) 52 EDUCATION Informatics and the National Information Resource (I. Chebotaru...the method of actions, which were successful in the past. The experience of previous developments is implemented in the prototype programs. Many data...of the converter lining, due to reduction of ferroalloy consumption, oxygen consumption and energy resource consumption and due to a decrease of

Mental Calculation Methods Used by 11-Year-Olds in Different Attainment Bands: A Reanalysis of Data from the 1987 APU Survey in the UK.

ERIC Educational Resources Information Center

Foxman, Derek; Beishuizen, Meindert

2002-01-01

Reanalyzes data obtained in 1987 on mental calculation strategies used by 11-year-olds in England, Wales, and Northern Ireland. Classifies mental strategies developed in the past decade in international research. Compares frequency and effectiveness of the strategies used by pupils of different levels of attainment. Discusses basic arithmetic…

Generating Automated Text Complexity Classifications That Are Aligned with Targeted Text Complexity Standards. Research Report. ETS RR-10-28

ERIC Educational Resources Information Center

Sheehan, Kathleen M.; Kostin, Irene; Futagi, Yoko; Flor, Michael

2010-01-01

The Common Core Standards call for students to be exposed to a much greater level of text complexity than has been the norm in schools for the past 40 years. Textbook publishers, teachers, and assessment developers are being asked to refocus materials and methods to ensure that students are challenged to read texts at steadily increasing…

Ethical Mindfulness and Reflexivity: Managing a Research Relationship with Children and Young People in a 14-Year Qualitative Longitudinal Research (QLR) Study

ERIC Educational Resources Information Center

Warin, Jo

2011-01-01

This article draws on the articulation of a value for reflexivity that has accumulated within qualitative methods debates in the past decade. It demonstrates how reflexivity is interwoven with the concept of ethical mindfulness. The argument has developed from a consideration of the ethical dilemmas that were a salient aspect of an ongoing…

Five Decades of Research in Speech Motor Control: What Have We Learned, and Where Should We Go from Here?

ERIC Educational Resources Information Center

Perkell, Joseph S.

2013-01-01

Purpose: The author presents a view of research in speech motor control over the past 5 decades, as observed from within Ken Stevens's Speech Communication Group (SCG) in the Research Laboratory of Electronics at MIT. Method: The author presents a limited overview of some important developments and discoveries. The perspective is based…

Integrating Life Skills Into a Theory-Based Drug-Use Prevention Program: Effectiveness among Junior High Students in Taiwan

ERIC Educational Resources Information Center

Huang, Chiu-Mieh; Chien, Li-Yin; Cheng, Chin-Feng; Guo, Jong-Long

2012-01-01

Background: Drug use has been noted among students in Taiwan during the past decade and schools have a role in preventing or delaying students' drug use. We developed and evaluated a school-based, drug-use prevention program integrating the theory of planned behavior (TPB) and life skills for junior high school students. Methods: We recruited 441…

Aqua/Aura Updated Inclination Adjust Maneuver Performance Prediction Model

NASA Technical Reports Server (NTRS)

Boone, Spencer

2017-01-01

This presentation will discuss the updated Inclination Adjust Maneuver (IAM) performance prediction model that was developed for Aqua and Aura following the 2017 IAM series. This updated model uses statistical regression methods to identify potential long-term trends in maneuver parameters, yielding improved predictions when re-planning past maneuvers. The presentation has been reviewed and approved by Eric Moyer, ESMO Deputy Project Manager.

Gauging the Gaps in Student Problem-Solving Skills: Assessment of Individual and Group Use of Problem-Solving Strategies Using Online Discussions

ERIC Educational Resources Information Center

Anderson, William L.; Mitchell, Steven M.; Osgood, Marcy P.

2008-01-01

For the past 3 yr, faculty at the University of New Mexico, Department of Biochemistry and Molecular Biology have been using interactive online Problem-Based Learning (PBL) case discussions in our large-enrollment classes. We have developed an illustrative tracking method to monitor student use of problem-solving strategies to provide targeted…

Mapping the Themes, Impact, and Cohesion of Creativity Research over the Last 25 Years

ERIC Educational Resources Information Center

Williams, Rich; Runco, Mark A.; Berlow, Eric

2016-01-01

This article describes the themes found in the past 25 years of creativity research. Computational methods and network analysis were used to map keyword theme development across ~1,400 documents and ~5,000 unique keywords from 1990 (the first year keywords are available in Web of Science) to 2015. Data were retrieved from Web of Science using the…

Development and Testing of a Coupled Ocean-atmosphere Mesoscale Ensemble Prediction System

DTIC Science & Technology

2011-06-28

wind, temperature, and moisture variables, while the oceanographic ET is derived from ocean current, temperature, and salinity variables. Estimates of...wind, temperature, and moisture variables while the oceanographic ET is derived from ocean current temperature, and salinity variables. Estimates of...uncertainty in the model. Rigorously accurate ensemble methods for describing the distribution of future states given past information include particle

Service Networks and Patterns of Utilization: Mental Health Programs, Indian Health Service (IHS). Volume 1: Overview and Recommendations.

ERIC Educational Resources Information Center

Attneave, Carolyn L.; Beiser, Morton

Constituting an overview of a 10-volume report on the historical development and contemporary activities (1966-1973) of each of the 8 administrative Area Offices of the Indian Health Service (IHS) Mental Health Programs, this volume includes: the methods used for data collection (personal interviews with both past and present IHS key officials,…

Apollo/Skylab suit program-management systems study, volume 1

NASA Technical Reports Server (NTRS)

Mcniff, M.

1974-01-01

A management systems study for future spacesuit programs was conducted to assess past suit program requirements and management systems in addition to new and modified systems in order to identify the most cost effective methods for use during future spacesuit programs. The effort and its findings concerned the development and production of all hardware ranging from crew protective gear to total launch vehicles.

Spectral methods to detect surface mines

NASA Astrophysics Data System (ADS)

Winter, Edwin M.; Schatten Silvious, Miranda

2008-04-01

Over the past five years, advances have been made in the spectral detection of surface mines under minefield detection programs at the U. S. Army RDECOM CERDEC Night Vision and Electronic Sensors Directorate (NVESD). The problem of detecting surface land mines ranges from the relatively simple, the detection of large anti-vehicle mines on bare soil, to the very difficult, the detection of anti-personnel mines in thick vegetation. While spatial and spectral approaches can be applied to the detection of surface mines, spatial-only detection requires many pixels-on-target such that the mine is actually imaged and shape-based features can be exploited. This method is unreliable in vegetated areas because only part of the mine may be exposed, while spectral detection is possible without the mine being resolved. At NVESD, hyperspectral and multi-spectral sensors throughout the reflection and thermal spectral regimes have been applied to the mine detection problem. Data has been collected on mines in forest and desert regions and algorithms have been developed both to detect the mines as anomalies and to detect the mines based on their spectral signature. In addition to the detection of individual mines, algorithms have been developed to exploit the similarities of mines in a minefield to improve their detection probability. In this paper, the types of spectral data collected over the past five years will be summarized along with the advances in algorithm development.

Improved memory loading techniques for the TSRV display system

NASA Technical Reports Server (NTRS)

Easley, W. C.; Lynn, W. A.; Mcluer, D. G.

1986-01-01

A recent upgrade of the TSRV research flight system at NASA Langley Research Center retained the original monochrome display system. However, the display memory loading equipment was replaced requiring design and development of new methods of performing this task. This paper describes the new techniques developed to load memory in the display system. An outdated paper tape method for loading the BOOTSTRAP control program was replaced by EPROM storage of the characters contained on the tape. Rather than move a tape past an optical reader, a counter was implemented which steps sequentially through EPROM addresses and presents the same data to the loader circuitry. A cumbersome cassette tape method for loading the applications software was replaced with a floppy disk method using a microprocessor terminal installed as part of the upgrade. The cassette memory image was transferred to disk and a specific software loader was written for the terminal which duplicates the function of the cassette loader.

Polymeric nanoparticles: A study on the preparation variables and characterization methods.

PubMed

Crucho, Carina I C; Barros, Maria Teresa

2017-11-01

Since the emergence of Nanotechnology in the past decades, the development and design of nanomaterials has become an important field of research. An emerging component in this field is nanomedicine, wherein nanoscale materials are being developed for use as imaging agents or for drug delivery applications. Much work is currently focused in the preparation of well-defined nanomaterials in terms of size and shape. These factors play a significantly role in the nanomaterial behavior in vivo. In this context, this review focuses on the toolbox of available methods for the preparation of polymeric nanoparticles. We highlight some recent examples from the literature that demonstrate the influence of the preparation method on the physicochemical characteristics of the nanoparticles. Additionally, in the second part, the characterization methods for this type of nanoparticles are discussed. Copyright © 2017 Elsevier B.V. All rights reserved.

Computational methods to extract meaning from text and advance theories of human cognition.

PubMed

McNamara, Danielle S

2011-01-01

Over the past two decades, researchers have made great advances in the area of computational methods for extracting meaning from text. This research has to a large extent been spurred by the development of latent semantic analysis (LSA), a method for extracting and representing the meaning of words using statistical computations applied to large corpora of text. Since the advent of LSA, researchers have developed and tested alternative statistical methods designed to detect and analyze meaning in text corpora. This research exemplifies how statistical models of semantics play an important role in our understanding of cognition and contribute to the field of cognitive science. Importantly, these models afford large-scale representations of human knowledge and allow researchers to explore various questions regarding knowledge, discourse processing, text comprehension, and language. This topic includes the latest progress by the leading researchers in the endeavor to go beyond LSA. Copyright © 2010 Cognitive Science Society, Inc.

Alternative Test Methods for Developmental Neurotoxicity: A ...

EPA Pesticide Factsheets

Exposure to environmental contaminants is well documented to adversely impact the development of the nervous system. However, the time, animal and resource intensive EPA and OECD testing guideline methods for developmental neurotoxicity (DNT) are not a viable solution to characterizing potential chemical hazards for the thousands of untested chemicals currently in commerce. Thus, research efforts over the past decade have endeavored to develop cost-effective alternative DNT testing methods. These efforts have begun to generate data that can inform regulatory decisions. Yet there are major challenges to both the acceptance and use of this data. Major scientific challenges for DNT include development of new methods and models that are “fit for purpose”, development of a decision-use framework, and regulatory acceptance of the methods. It is critical to understand that use of data from these methods will be driven mainly by the regulatory problems being addressed. Some problems may be addressed with limited datasets, while others may require data for large numbers of chemicals, or require the development and use of new biological and computational models. For example mechanistic information derived from in vitro DNT assays can be used to inform weight of evidence (WoE) or integrated approaches to testing and assessment (IATA) approaches for chemical-specific assessments. Alternatively, in vitro data can be used to prioritize (for further testing) the thousands

Promoting Critical, Elaborative Discussions through a Collaboration Script and Argument Diagrams

ERIC Educational Resources Information Center

Scheuer, Oliver; McLaren, Bruce M.; Weinberger, Armin; Niebuhr, Sabine

2014-01-01

During the past two decades a variety of approaches to support argumentation learning in computer-based learning environments have been investigated. We present an approach that combines argumentation diagramming and collaboration scripts, two methods successfully used in the past individually. The rationale for combining the methods is to…

Quantitative health impact assessment: taking stock and moving forward.

PubMed

Fehr, Rainer; Hurley, Fintan; Mekel, Odile Cecile; Mackenbach, Johan P

2012-12-01

Over the past years, application of health impact assessment has increased substantially, and there has been a strong growth of tools that allow quantification of health impacts for a range of health relevant policies. We review these developments, and conclude that further tool development is no longer a main priority, although several aspects need to be further developed, such as methods to assess impacts on health inequalities and to assess uncertainties. The main new challenges are, first, to conduct a comparative evaluation of different tools, and, second, to ensure the maintenance and continued availability of the toolkits including their data contents.

Artificial Intelligence in Autonomous Telescopes

NASA Astrophysics Data System (ADS)

Mahoney, William; Thanjavur, Karun

2011-03-01

Artificial Intelligence (AI) is key to the natural evolution of today's automated telescopes to fully autonomous systems. Based on its rapid development over the past five decades, AI offers numerous, well-tested techniques for knowledge based decision making essential for real-time telescope monitoring and control, with minimal - and eventually no - human intervention. We present three applications of AI developed at CFHT for monitoring instantaneous sky conditions, assessing quality of imaging data, and a prototype for scheduling observations in real-time. Closely complementing the current remote operations at CFHT, we foresee further development of these methods and full integration in the near future.

Using modern analogues to reconstruct past landcover

NASA Astrophysics Data System (ADS)

Brewer, Simon

2016-04-01

The physical cover of the earth plays an important role in the earth system. It affects the climate through feedbacks such as albedo and surface roughness, forms part of the carbon cycle as both sink and source and is both affected by and can affect human societies. Reconstructing past changes in land use and land cover helps to understand how these interactions may have changed over time, and provides important boundary conditions for paleoclimate models. Pollen assemblages, extracted from sedimentary sequences, provide one of the most abundant sources of information about past changes in land cover over the Holocene period. However, the relationship between plant cover and sedimentary pollen abundance is complex and non-linear, being affected by differential dispersal, production and taxonomic resolution. One method to correct for this and provide quantified estimates of past land cover is to calibrate modern pollen assemblages against contemporary remotely sensed estimates of land cover. Results will be presented from developing such a calibration for a set of European modern pollen samples and AVHRR-based tree cover estimates. An emphasis will be placed on the output of validation tests of the calibration, and what this indicates for the predictive skill of this approach. The calibration will then be applied to a set of pollen sequences for the European continent for the past 11,000 years, and the patterns of reconstructed land cover will be discussed.

Preparation of High-Grade Powders from Tomato Paste Using a Vacuum Foam Drying Method.

PubMed

Sramek, Martin; Schweiggert, Ralf Martin; van Kampen, Andreas; Carle, Reinhold; Kohlus, Reinhard

2015-08-01

We present a rapid and gentle drying method for the production of high-grade tomato powders from double concentrated tomato paste, comparing results with powders obtained by foam mat air drying and freeze dried powders. The principle of this method consists of drying tomato paste in foamed state at low temperatures in vacuum. The formulations were dried at temperatures of 50, 60, and 70 °C and vacuum of 200 mbar. Foam stability was affected by low serum viscosity and the presence of solid particles in tomato paste. Consequently, serum viscosity was increased by maltodextrin addition, yielding optimum stability at tomato paste:maltodextrin ratio of 2.4:1 (w/w) in dry matter. Material foamability was improved by addition of 0.5% (w/w, fresh weight) egg white. Because of solid particles in tomato paste, foam air filling had to be limited to critical air volume fraction of Φ = 0.7. The paste was first pre-foamed to Φ = 0.2 and subsequently expanded in vacuo. After drying to a moisture content of 5.6% to 7.5% wet base (w.b.), the materials obtained were in glassy state. Qualities of the resulting powders were compared with those produced by freeze and air drying. Total color changes were the least after vacuum drying, whereas air drying resulted in noticeable color changes. Vacuum foam drying at 50 °C led to insignificant carotenoid losses, being equivalent to the time-consuming freeze drying method. In contrast, air drying caused lycopene and β-carotene losses of 18% to 33% and 14% to 19% respectively. Thus, vacuum foam drying enables production of high-grade tomato powders being qualitatively similar to powders obtained by freeze drying. © 2015 Institute of Food Technologists®

Towards extensive spatio-temporal reconstructions of North American land cover: a comparison of state-of-the-art pollen-vegetation models

NASA Astrophysics Data System (ADS)

Dawson, A.; Trachsel, M.; Goring, S. J.; Paciorek, C. J.; McLachlan, J. S.; Jackson, S. T.; Williams, J. W.

2017-12-01

Pollen records have been extensively used to reconstruct past changes in vegetation and study the underlying processes. However, developing the statistical techniques needed to accurately represent both data and process uncertainties is a formidable challenge. Recent advances in paleoecoinformatics (e.g. the Neotoma Paleoecology Database and the European Pollen Database), Bayesian age-depth models, and process-based pollen-vegetation models, and Bayesian hierarchical modeling have pushed paleovegetation reconstructions forward to a point where multiple sources of uncertainty can be incorporated into reconstructions, which in turn enables new hypotheses to be asked and more rigorous integration of paleovegetation data with earth system models and terrestrial ecosystem models. Several kinds of pollen-vegetation models have been developed, notably LOVE/REVEALS, STEPPS, and classical transfer functions such as the modern analog technique. LOVE/REVEALS has been adopted as the standard method for the LandCover6k effort to develop quantitative reconstructions of land cover for the Holocene, while STEPPS has been developed recently as part of the PalEON project and applied to reconstruct with uncertainty shifts in forest composition in New England and the upper Midwest during the late Holocene. Each PVM has different assumptions and structure and uses different input data, but few comparisons among approaches yet exist. Here, we present new reconstructions of land cover change in northern North America during the Holocene based on LOVE/REVEALS and data drawn from the Neotoma database and compare STEPPS-based reconstructions to those from LOVE/REVEALS. These parallel developments with LOVE/REVEALS provide an opportunity to compare and contrast models, and to begin to generate continental scale reconstructions, with explicit uncertainties, that can provide a base for interdisciplinary research within the biogeosciences. We show how STEPPS provides an important benchmark for past land-cover reconstruction, and how the LandCover 6k effort in North America advances our understanding of the past by allowing cross-continent comparisons using standardized methods and quantifying the impact of humans in the early Anthropocene.

On the generalized VIP time integral methodology for transient thermal problems

NASA Technical Reports Server (NTRS)

Mei, Youping; Chen, Xiaoqin; Tamma, Kumar K.; Sha, Desong

1993-01-01

The paper describes the development and applicability of a generalized VIrtual-Pulse (VIP) time integral method of computation for thermal problems. Unlike past approaches for general heat transfer computations, and with the advent of high speed computing technology and the importance of parallel computations for efficient use of computing environments, a major motivation via the developments described in this paper is the need for developing explicit computational procedures with improved accuracy and stability characteristics. As a consequence, a new and effective VIP methodology is described which inherits these improved characteristics. Numerical illustrative examples are provided to demonstrate the developments and validate the results obtained for thermal problems.

An improved method for predicting the lightning performance of high and extra-high-voltage substation shielding

NASA Astrophysics Data System (ADS)

Vinh, T.

1980-08-01

There is a need for better and more effective lightning protection for transmission and switching substations. In the past, a number of empirical methods were utilized to design systems to protect substations and transmission lines from direct lightning strokes. The need exists for convenient analytical lightning models adequate for engineering usage. In this study, analytical lightning models were developed along with a method for improved analysis of the physical properties of lightning through their use. This method of analysis is based upon the most recent statistical field data. The result is an improved method for predicting the occurrence of sheilding failure and for designing more effective protection for high and extra high voltage substations from direct strokes.

Recent Advances in Experimental Whole Genome Haplotyping Methods

PubMed Central

Huang, Mengting; Lu, Zuhong

2017-01-01

Haplotype plays a vital role in diverse fields; however, the sequencing technologies cannot resolve haplotype directly. Pioneers demonstrated several approaches to resolve haplotype in the early years, which was extensively reviewed. Since then, numerous methods have been developed recently that have significantly improved phasing performance. Here, we review experimental methods that have emerged mainly over the past five years, and categorize them into five classes according to their maximum scale of contiguity: (i) encapsulation, (ii) 3D structure capture and construction, (iii) compartmentalization, (iv) fluorography, (v) long-read sequencing. Several subsections of certain methods are attached to each class as instances. We also discuss the relative advantages and disadvantages of different classes and make comparisons among representative methods of each class. PMID:28891974

Trends in U.S., Past-Year Marijuana Use from 1985–2009; An Age-Period-Cohort Analysis

PubMed Central

Miech, Richard; Koester, Stephen

2014-01-01

Background We present a formal age-period-cohort analysis to examine if the recent increase in past-year marijuana use among the young is specific to the younger generation or if, instead, it is part of a general increase present across cohorts of all ages. This is the first age-period-cohort analysis of past-year marijuana use that includes adult trends from 2001–09. Methods Data come from the National Survey on Drug Use and Health, a series of annual, nationally-representative, cross-sectional surveys of the U.S. civilian, non-institutionalized population. The analysis focuses on the 25 year time span from 1985–2009 and uses the recently developed ‘intrinsic estimator’ algorithm to estimate independent effects of age, period, and cohort. Results The recent increase in past-year marijuana use is not unique to the youngest birth cohorts. An independent, positive influence of cohort membership on past-year marijuana use, net of historical period and age effects, is smaller for today’s youngest cohorts than it was for the cohorts that came immediately before, and, in fact, is at its lowest level in three decades. The recent increase in marijuana use among the young is more consistent with a historical period effect that has acted across all cohorts. Period and cohort trends differ substantially for Hispanics. Conclusions The major forces that drive trends in past-year marijuana use are moving away from cohort-specific factors and toward broad-based influences that affect cohorts of all ages. Strategic public health and policy efforts aimed at countering the recent increase in past-year marijuana use should do the same. PMID:22361212

Virtual Museums as Digital Storytellers for Dissemination of Built Environment: Possible Narratives and Outlooks for Appealing and Rich Encounters with the Past

NASA Astrophysics Data System (ADS)

Caspani, S.; Brumana, R.; Oreni, D.; Previtali, M.

2017-08-01

Virtual Museums (VMs) have emerged from the ongoing crossbreeding process between museums and digital technologies as an additional "channel" for disseminating content and providing knowledge about cultural heritage. VMs is a concept still in definition, as this paper attempts to briefly retrace, the recognition of its potential has motivated our efforts for further developments. Core questions that motivated the first phase of the research presented have been: can digital storytelling become the key feature of future VMs? May narratives approach support communication and understanding of cultural heritage providing enriching encounters with the past? May complex systems, such as the built environment and landscape (characterized by space-time relations among elements, that are often difficult to read or appreciate) find in digital storytelling a method that exploits their values as documents and palimpsests of human history? Can an increased awareness of the past contribute to support a sense of belonging and identity construction? Which kind of stories can be currently designed with the existing tools? The paper, after an introductory overview, provides a tentative reply to these questions combining the main findings offered by a series of recent studies related to this scenario with some preliminary direct investigations and, eventually, it proposes some outlooks for future developments.

Force Evaluation in the Lattice Boltzmann Method Involving Curved Geometry

NASA Technical Reports Server (NTRS)

Mei, Renwei; Yu, Dazhi; Shyy, Wei; Luo, Li-Shi; Bushnell, Dennis M. (Technical Monitor)

2002-01-01

The present work investigates two approaches for force evaluation in the lattice Boltzmann equation: the momentum- exchange method and the stress-integration method on the surface of a body. The boundary condition for the particle distribution functions on curved geometries is handled with second order accuracy based on our recent works. The stress-integration method is computationally laborious for two-dimensional flows and in general difficult to implement for three-dimensional flows, while the momentum-exchange method is reliable, accurate, and easy to implement for both two-dimensional and three-dimensional flows. Several test cases are selected to evaluate the present methods, including: (i) two-dimensional pressure-driven channel flow; (ii) two-dimensional uniform flow past a column of cylinders; (iii) two-dimensional flow past a cylinder asymmetrically placed in a channel (with vortex shedding); (iv) three-dimensional pressure-driven flow in a circular pipe; and (v) three-dimensional flow past a sphere. The drag evaluated by using the momentum-exchange method agrees well with the exact or other published results.

Sorting protein decoys by machine-learning-to-rank

PubMed Central

Jing, Xiaoyang; Wang, Kai; Lu, Ruqian; Dong, Qiwen

2016-01-01

Much progress has been made in Protein structure prediction during the last few decades. As the predicted models can span a broad range of accuracy spectrum, the accuracy of quality estimation becomes one of the key elements of successful protein structure prediction. Over the past years, a number of methods have been developed to address this issue, and these methods could be roughly divided into three categories: the single-model methods, clustering-based methods and quasi single-model methods. In this study, we develop a single-model method MQAPRank based on the learning-to-rank algorithm firstly, and then implement a quasi single-model method Quasi-MQAPRank. The proposed methods are benchmarked on the 3DRobot and CASP11 dataset. The five-fold cross-validation on the 3DRobot dataset shows the proposed single model method outperforms other methods whose outputs are taken as features of the proposed method, and the quasi single-model method can further enhance the performance. On the CASP11 dataset, the proposed methods also perform well compared with other leading methods in corresponding categories. In particular, the Quasi-MQAPRank method achieves a considerable performance on the CASP11 Best150 dataset. PMID:27530967

Sorting protein decoys by machine-learning-to-rank.

PubMed

Jing, Xiaoyang; Wang, Kai; Lu, Ruqian; Dong, Qiwen

2016-08-17

Much progress has been made in Protein structure prediction during the last few decades. As the predicted models can span a broad range of accuracy spectrum, the accuracy of quality estimation becomes one of the key elements of successful protein structure prediction. Over the past years, a number of methods have been developed to address this issue, and these methods could be roughly divided into three categories: the single-model methods, clustering-based methods and quasi single-model methods. In this study, we develop a single-model method MQAPRank based on the learning-to-rank algorithm firstly, and then implement a quasi single-model method Quasi-MQAPRank. The proposed methods are benchmarked on the 3DRobot and CASP11 dataset. The five-fold cross-validation on the 3DRobot dataset shows the proposed single model method outperforms other methods whose outputs are taken as features of the proposed method, and the quasi single-model method can further enhance the performance. On the CASP11 dataset, the proposed methods also perform well compared with other leading methods in corresponding categories. In particular, the Quasi-MQAPRank method achieves a considerable performance on the CASP11 Best150 dataset.

New Primary Standards for Establishing SI Traceability for Moisture Measurements in Solid Materials

NASA Astrophysics Data System (ADS)

Heinonen, M.; Bell, S.; Choi, B. Il; Cortellessa, G.; Fernicola, V.; Georgin, E.; Hudoklin, D.; Ionescu, G. V.; Ismail, N.; Keawprasert, T.; Krasheninina, M.; Aro, R.; Nielsen, J.; Oğuz Aytekin, S.; Österberg, P.; Skabar, J.; Strnad, R.

2018-01-01

A European research project METefnet addresses a fundamental obstacle to improving energy-intensive drying process control: due to ambiguous reference analysis methods and insufficient methods for estimating uncertainty in moisture measurements, the achievable accuracy in the past was limited and measurement uncertainties were largely unknown. This paper reports the developments in METefnet that provide a sound basis for the SI traceability: four new primary standards for realizing the water mass fraction were set up, analyzed and compared to each other. The operation of these standards is based on combining sample weighing with different water vapor detection techniques: cold trap, chilled mirror, electrolytic and coulometric Karl Fischer titration. The results show that an equivalence of 0.2 % has been achieved between the water mass fraction realizations and that the developed methods are applicable to a wide range of materials.

A Lie-Theoretic Perspective on O(n) Mass Matrix Inversion for Serial Manipulators and Polypeptide Chains.

PubMed

Lee, Kiju; Wang, Yunfeng; Chirikjian, Gregory S

2007-11-01

Over the past several decades a number of O(n) methods for forward and inverse dynamics computations have been developed in the multi-body dynamics and robotics literature. A method was developed in 1974 by Fixman for O(n) computation of the mass-matrix determinant for a serial polymer chain consisting of point masses. In other recent papers, we extended this method in order to compute the inverse of the mass matrix for serial chains consisting of point masses. In the present paper, we extend these ideas further and address the case of serial chains composed of rigid-bodies. This requires the use of relatively deep mathematics associated with the rotation group, SO(3), and the special Euclidean group, SE(3), and specifically, it requires that one differentiates functions of Lie-group-valued argument.

Impact of drying on pore structures in ettringite-rich cements

DOE Office of Scientific and Technical Information (OSTI.GOV)

Galan, I., E-mail: isabelgalan@abdn.ac.uk; Beltagui, H.; García-Maté, M.

Drying techniques affect the properties of cement pastes to varying extents. The effect of different drying techniques on calcium sulfoaluminate-based (C$A) cements and their constituent phases is reported for a range of simulated and commercial C$A pastes which are benchmarked against an OPC paste. The recommended methodologies used to dry samples were identified from the literature and include D-drying and solvent exchange. These methods were used in conjunction with mercury intrusion porosimetry (MIP) and X-ray powder diffraction (XRPD) measurements to assess the changes in pore structure and the damage to crystalline phases, respectively. D-drying and isopropanol exchange are the mostmore » satisfactory and least damaging methods for drying C$A based pastes.« less

Sensitivity-Uncertainty Based Nuclear Criticality Safety Validation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brown, Forrest B.

2016-09-20

These are slides from a seminar given to the University of Mexico Nuclear Engineering Department. Whisper is a statistical analysis package developed to support nuclear criticality safety validation. It uses the sensitivity profile data for an application as computed by MCNP6 along with covariance files for the nuclear data to determine a baseline upper-subcritical-limit for the application. Whisper and its associated benchmark files are developed and maintained as part of MCNP6, and will be distributed with all future releases of MCNP6. Although sensitivity-uncertainty methods for NCS validation have been under development for 20 years, continuous-energy Monte Carlo codes such asmore » MCNP could not determine the required adjoint-weighted tallies for sensitivity profiles. The recent introduction of the iterated fission probability method into MCNP led to the rapid development of sensitivity analysis capabilities for MCNP6 and the development of Whisper. Sensitivity-uncertainty based methods represent the future for NCS validation – making full use of today’s computer power to codify past approaches based largely on expert judgment. Validation results are defensible, auditable, and repeatable as needed with different assumptions and process models. The new methods can supplement, support, and extend traditional validation approaches.« less

Report of the Terrestrial Bodies Science Working Group. Volume 9: Complementary research and development

NASA Technical Reports Server (NTRS)

Fanale, F. P.; Kaula, W. M.; Mccord, T. B.; Trombka, J. L.

1977-01-01

Topics discussed include the need for: the conception and development of a wide spectrum of experiments, instruments, and vehicles in order to derive the proper return from an exploration program; the effective use of alternative methods of data acquisition involving ground-based, airborne and near Earth orbital techniques to supplement spacraft mission; and continued reduction and analysis of existing data including laboratory and theoretical studies in order to benefit fully from experiments and to build on the past programs toward a logical and efficient exploration of the solar system.

Utilization of UARS Data in Validation of Photochemical and Dynamical Mechanism in Stratospheric Models

NASA Technical Reports Server (NTRS)

Rodriquez, Jose M.; Hu, Wenjie; Ko, Malcolm K. W.

1995-01-01

We proposed model-data intercomparison studies for UARS data. In the past three months, we have been working on constructing analysis tools to diagnose the UARS data. The 'Trajectory mapping' technique, which was developed by Morris (1994), is adaptable to generate synoptic maps of trace gas data from asynoptic observations. An in-house trajectory model (kinematic methods following Merrill et al., 1986 and Pickering et al., 1994) has been developed in AER under contract with NASA/ACMAP and the trajectory mapping tool has been applied to analyze UARS measurement.

Surveillance theory applied to virus detection: a case for targeted discovery

USGS Publications Warehouse

Bogich, Tiffany L.; Anthony, Simon J.; Nichols, James D.

2013-01-01

Virus detection and mathematical modeling have gone through rapid developments in the past decade. Both offer new insights into the epidemiology of infectious disease and characterization of future risk; however, modeling has not yet been applied to designing the best surveillance strategies for viral and pathogen discovery. We review recent developments and propose methods to integrate viral and pathogen discovery and mathematical modeling through optimal surveillance theory, arguing for a more targeted approach to novel virus detection guided by the principles of adaptive management and structured decision-making.

Chemico-therapeutic approach to prevention of dental caries. [using stannous fluoride gel

NASA Technical Reports Server (NTRS)

Shannon, I. L.

1975-01-01

The program of chemical preventive dentistry is based primarily upon the development of a procedure for stabilizing stannous fluoride in solution by forcing it into glycerin. New topical fluoride treatment concentrates, fluoride containing gels and prophylaxis pastes, as well as a completely stable stannous fluoride dentifrice are made possible by the development of a rather complicated heat application method to force stannous fluoride into solution in glycerin. That the stannous fluoride is clinically effective in such a preparation is demonstrated briefly on orthodontic patients.

Alternative Practice Dental Hygiene in California: Past, Present, and Future

PubMed Central

MERTZ, ELIZABETH; GLASSMAN, PAUL

2012-01-01

This study examines the development of the registered dental hygienist in alternative practice in California through an analysis of archival documents, stakeholder interviews, and two surveys of the registered dental hygienist in alternative practice. Designing, testing and implementing a new practice model for dental hygienists took 23 years. Today, registered dental hygienists in alternative practice have developed viable alternative methods for delivering preventive oral health care services in a range of settings with patients who often have no other source of access to care. PMID:21337961

Compressible Navier-Stokes equations: A study of leading edge effects

NASA Technical Reports Server (NTRS)

Hariharan, S. I.; Karbhari, P. R.

1987-01-01

A computational method is developed that allows numerical calculations of the time dependent compressible Navier-Stokes equations.The current results concern a study of flow past a semi-infinite flat plate.Flow develops from given inflow conditions upstream and passes over the flat plate to leave the computational domain without reflecting at the downstream boundary. Leading edge effects are included in this paper. In addition, specification of a heated region which gets convected with the flow is considered. The time history of this convection is obtained, and it exhibits a wave phenomena.

Safe Practices for Copy and Paste in the EHR. Systematic Review, Recommendations, and Novel Model for Health IT Collaboration.

PubMed

Tsou, Amy Y; Lehmann, Christoph U; Michel, Jeremy; Solomon, Ronni; Possanza, Lorraine; Gandhi, Tejal

2017-01-11

Copy and paste functionality can support efficiency during clinical documentation, but may promote inaccurate documentation with risks for patient safety. The Partnership for Health IT Patient Safety was formed to gather data, conduct analysis, educate, and disseminate safe practices for safer care using health information technology (IT). To characterize copy and paste events in clinical care, identify safety risks, describe existing evidence, and develop implementable practice recommendations for safe reuse of information via copy and paste. The Partnership 1) reviewed 12 reported safety events, 2) solicited expert input, and 3) performed a systematic literature review (2010 to January 2015) to identify publications addressing frequency, perceptions/attitudes, patient safety risks, existing guidance, and potential interventions and mitigation practices. The literature review identified 51 publications that were included. Overall, 66% to 90% of clinicians routinely use copy and paste. One study of diagnostic errors found that copy and paste led to 2.6% of errors in which a missed diagnosis required patients to seek additional unplanned care. Copy and paste can promote note bloat, internal inconsistencies, error propagation, and documentation in the wrong patient chart. Existing guidance identified specific responsibilities for authors, organizations, and electronic health record (EHR) developers. Analysis of 12 reported copy and paste safety events was congruent with problems identified from the literature review. Despite regular copy and paste use, evidence regarding direct risk to patient safety remains sparse, with significant study limitations. Drawing on existing evidence, the Partnership developed four safe practice recommendations: 1) Provide a mechanism to make copy and paste material easily identifiable; 2) Ensure the provenance of copy and paste material is readily available; 3) Ensure adequate staff training and education; 4) Ensure copy and paste practices are regularly monitored, measured, and assessed.

Weather Typing-Based Flood Frequency Analysis Verified for Exceptional Historical Events of Past 500 Years Along the Meuse River

NASA Astrophysics Data System (ADS)

De Niel, J.; Demarée, G.; Willems, P.

2017-10-01

Governments, policy makers, and water managers are pushed by recent socioeconomic developments such as population growth and increased urbanization inclusive of occupation of floodplains to impose very stringent regulations on the design of hydrological structures. These structures need to withstand storms with return periods typically ranging between 1,250 and 10,000 years. Such quantification involves extrapolations of systematically measured instrumental data, possibly complemented by quantitative and/or qualitative historical data and paleoflood data. The accuracy of the extrapolations is, however, highly unclear in practice. In order to evaluate extreme river peak flow extrapolation and accuracy, we studied historical and instrumental data of the past 500 years along the Meuse River. We moreover propose an alternative method for the estimation of the extreme value distribution of river peak flows, based on weather types derived by sea level pressure reconstructions. This approach results in a more accurate estimation of the tail of the distribution, where current methods are underestimating the design levels related to extreme high return periods. The design flood for a 1,250 year return period is estimated at 4,800 m3 s-1 for the proposed method, compared with 3,450 and 3,900 m3 s-1 for a traditional method and a previous study.

Detached eddy simulation for turbulent fluid-structure interaction of moving bodies using the constraint-based immersed boundary method

NASA Astrophysics Data System (ADS)

Nangia, Nishant; Bhalla, Amneet P. S.; Griffith, Boyce E.; Patankar, Neelesh A.

2016-11-01

Flows over bodies of industrial importance often contain both an attached boundary layer region near the structure and a region of massively separated flow near its trailing edge. When simulating these flows with turbulence modeling, the Reynolds-averaged Navier-Stokes (RANS) approach is more efficient in the former, whereas large-eddy simulation (LES) is more accurate in the latter. Detached-eddy simulation (DES), based on the Spalart-Allmaras model, is a hybrid method that switches from RANS mode of solution in attached boundary layers to LES in detached flow regions. Simulations of turbulent flows over moving structures on a body-fitted mesh incur an enormous remeshing cost every time step. The constraint-based immersed boundary (cIB) method eliminates this operation by placing the structure on a Cartesian mesh and enforcing a rigidity constraint as an additional forcing in the Navier-Stokes momentum equation. We outline the formulation and development of a parallel DES-cIB method using adaptive mesh refinement. We show preliminary validation results for flows past stationary bodies with both attached and separated boundary layers along with results for turbulent flows past moving bodies. This work is supported by the National Science Foundation Graduate Research Fellowship under Grant No. DGE-1324585.

“Black Swans” of Hydrology: Can our Models Address the Science of Hydrologic Change?

NASA Astrophysics Data System (ADS)

Kumar, P.

2009-12-01

Coupled models of terrestrial hydrology and climate have grown in complexity leading to better understanding of the coupling between the hydrosphere, biosphere, and the climate system. During the past two decades, these models have evolved through generational changes as they have grown in sophistication in their ability to resolve spatial heterogeneity as well as vegetation dynamics and biogeochemistry. These developments have, in part, been driven by data collection efforts ranging from focused field campaigns to long-term observational networks, advances in remote sensing and other measurement technologies, along with sophisticated estimation and assimilation methods. However, the hydrologic cycle is changing leading to unexpected and unanticipated behavior through emergent dynamics and patterns that are not part of the historical milieu. Is there a new thinking that is needed to address this challenge? The goal of this talk is to draw from the modeling developments in the past two decades to foster a debate for moving forward.

Productivity costs in economic evaluations: past, present, future.

PubMed

Krol, Marieke; Brouwer, Werner; Rutten, Frans

2013-07-01

Productivity costs occur when the productivity of individuals is affected by illness, treatment, disability or premature death. The objective of this paper was to review past and current developments related to the inclusion, identification, measurement and valuation of productivity costs in economic evaluations. The main debates in the theory and practice of economic evaluations of health technologies described in this review have centred on the questions of whether and how to include productivity costs, especially productivity costs related to paid work. The past few decades have seen important progress in this area. There are important sources of productivity costs other than absenteeism (e.g. presenteeism and multiplier effects in co-workers), but their exact influence on costs remains unclear. Different measurement instruments have been developed over the years, but which instrument provides the most accurate estimates has not been established. Several valuation approaches have been proposed. While empirical research suggests that productivity costs are best included in the cost side of the cost-effectiveness ratio, the jury is still out regarding whether the human capital approach or the friction cost approach is the most appropriate valuation method to do so. Despite the progress and the substantial amount of scientific research, a consensus has not been reached on either the inclusion of productivity costs in economic evaluations or the methods used to produce productivity cost estimates. Such a lack of consensus has likely contributed to ignoring productivity costs in actual economic evaluations and is reflected in variations in national health economic guidelines. Further research is needed to lessen the controversy regarding the estimation of health-related productivity costs. More standardization would increase the comparability and credibility of economic evaluations taking a societal perspective.

The WISTAH hand study: a prospective cohort study of distal upper extremity musculoskeletal disorders.

PubMed

Garg, Arun; Hegmann, Kurt T; Wertsch, Jacqueline J; Kapellusch, Jay; Thiese, Matthew S; Bloswick, Donald; Merryweather, Andrew; Sesek, Richard; Deckow-Schaefer, Gwen; Foster, James; Wood, Eric; Kendall, Richard; Sheng, Xiaoming; Holubkov, Richard

2012-06-06

Few prospective cohort studies of distal upper extremity musculoskeletal disorders have been performed. Past studies have provided somewhat conflicting evidence for occupational risk factors and have largely reported data without adjustments for many personal and psychosocial factors. A multi-center prospective cohort study was incepted to quantify risk factors for distal upper extremity musculoskeletal disorders and potentially develop improved methods for analyzing jobs. Disorders to analyze included carpal tunnel syndrome, lateral epicondylalgia, medial epicondylalgia, trigger digit, deQuervain's stenosing tenosynovitis and other tendinoses. Workers have thus far been enrolled from 17 different employment settings in 3 diverse US states and performed widely varying work. At baseline, workers undergo laptop administered questionnaires, structured interviews, two standardized physical examinations and nerve conduction studies to ascertain demographic, medical history, psychosocial factors and current musculoskeletal disorders. All workers' jobs are individually measured for physical factors and are videotaped. Workers are followed monthly for the development of musculoskeletal disorders. Repeat nerve conduction studies are performed for those with symptoms of tingling and numbness in the prior six months. Changes in jobs necessitate re-measure and re-videotaping of job physical factors. Case definitions have been established. Point prevalence of carpal tunnel syndrome is a combination of paraesthesias in at least two median nerve-served digits plus an abnormal nerve conduction study at baseline. The lifetime cumulative incidence of carpal tunnel syndrome will also include those with a past history of carpal tunnel syndrome. Incident cases will exclude those with either a past history or prevalent cases at baseline. Statistical methods planned include survival analyses and logistic regression. A prospective cohort study of distal upper extremity musculoskeletal disorders is underway and has successfully enrolled over 1,000 workers to date.

[Biosynthesis of adipic acid].

PubMed

Han, Li; Chen, Wujiu; Yuan, Fei; Zhang, Yuanyuan; Wang, Qinhong; Ma, Yanhe

2013-10-01

Adipic acid is a six-carbon dicarboxylic acid, mainly for the production of polymers such as nylon, chemical fiber and engineering plastics. Its annual demand is close to 3 million tons worldwide. Currently, the industrial production of adipic acid is based on the oxidation of aromatics from non-renewable petroleum resources by chemo-catalytic processes. It is heavily polluted and unsustainable, and the possible alternative method for adipic acid production should be developed. In the past years, with the development of synthetic biology and metabolic engineering, green and clean biotechnological methods for adipic acid production attracted more attention. In this study, the research advances of adipic acid and its precursor production are reviewed, followed by addressing the perspective of the possible new pathways for adipic acid production.

Nuclear medicine and imaging research: Quantitative studies in radiopharmaceutical science

DOE Office of Scientific and Technical Information (OSTI.GOV)

Copper, M.; Beck, R.N.

1991-06-01

During the past three years the program has undergone a substantial revitalization. There has been no significant change in the scientific direction of this grant, in which emphasis continues to be placed on developing new or improved methods of obtaining quantitative data from radiotracer imaging studies. However, considerable scientific progress has been made in the three areas of interest: Radiochemistry, Quantitative Methodologies, and Experimental Methods and Feasibility Studies, resulting in a sharper focus of perspective and improved integration of the overall scientific effort. Changes in Faculty and staff, including development of new collaborations, have contributed to this, as has acquisitionmore » of additional and new equipment and renovations and expansion of the core facilities. 121 refs., 30 figs., 2 tabs.« less

Quantitative landslide risk assessment and mapping on the basis of recent occurrences

NASA Astrophysics Data System (ADS)

Remondo, Juan; Bonachea, Jaime; Cendrero, Antonio

A quantitative procedure for mapping landslide risk is developed from considerations of hazard, vulnerability and valuation of exposed elements. The approach based on former work by the authors, is applied in the Bajo Deba area (northern Spain) where a detailed study of landslide occurrence and damage in the recent past (last 50 years) was carried out. Analyses and mapping are implemented in a Geographic Information System (GIS). The method is based on a susceptibility model developed previously from statistical relationships between past landslides and terrain parameters related to instability. Extrapolations based on past landslide behaviour were used to calculate failure frequency for the next 50 years. A detailed inventory of direct damage due to landslides during the study period was carried out and the main elements at risk in the area identified and mapped. Past direct (monetary) losses per type of element were estimated and expressed as an average 'specific loss' for events of a given magnitude (corresponding to a specified scenario). Vulnerability was assessed by comparing losses with the actual value of the elements affected and expressed as a fraction of that value (0-1). From hazard, vulnerability and monetary value, risk was computed for each element considered. Direct risk maps (€/pixel/year) were obtained and indirect losses from the disruption of economic activities due to landslides assessed. The final result is a risk map and table combining all losses per pixel for a 50-year period. Total monetary value at risk for the Bajo Deba area in the next 50 years is about 2.4 × 10 6 Euros.

Developing Better Methods for Obtaining Long-Term (Debt) Financing for Expansion of Physical Facilities at Small, Nonprofit, Traditional Midwestern Colleges.

ERIC Educational Resources Information Center

Westin, Charles A.

This research explored the problem of private colleges borrowing money to pay for construction of needed buildings. The study revealed that most colleges had borrowed money in the past for construction. About two-thirds of those foresaw further construction, and one-half of those who planned to build also planned to borrow to meet part of the cost…

Adaptive optical fluorescence microscopy.

PubMed

Ji, Na

2017-03-31

The past quarter century has witnessed rapid developments of fluorescence microscopy techniques that enable structural and functional imaging of biological specimens at unprecedented depth and resolution. The performance of these methods in multicellular organisms, however, is degraded by sample-induced optical aberrations. Here I review recent work on incorporating adaptive optics, a technology originally applied in astronomical telescopes to combat atmospheric aberrations, to improve image quality of fluorescence microscopy for biological imaging.

Application of the Galerkin/least-squares formulation to the analysis of hypersonic flows. II - Flow past a double ellipse

NASA Technical Reports Server (NTRS)

Chalot, F.; Hughes, T. J. R.; Johan, Z.; Shakib, F.

1991-01-01

A finite element method for the compressible Navier-Stokes equations is introduced. The discretization is based on entropy variables. The methodology is developed within the framework of a Galerkin/least-squares formulation to which a discontinuity-capturing operator is added. Results for four test cases selected among those of the Workshop on Hypersonic Flows for Reentry Problems are presented.

Designing Playful Learning by Using Educational Board Game for Children in the Age Range of 7-12: (A Case Study: Recycling and Waste Separation Education Board Game)

ERIC Educational Resources Information Center

Mostowfi, Sara; Mamaghani, Nasser Koleini; Khorramar, Mehdi

2016-01-01

Due to a progressive deterioration of our planet and its resources, environmental education has become important and children are required to understand environmental issues at an early ages. So, they can cultivate the positive changes in the future. Over the past decade, many new evaluation methods have developed for evaluating user experience…

Calculation of solar wind flows about terrestrial planets

NASA Technical Reports Server (NTRS)

Stahara, S. S.; Spreiter, J. R.

1982-01-01

A computational model was developed for the determination of the plasma and magnetic field properties of the global interaction of the solar wind with terrestrial planetary magneto/ionospheres. The theoretical method is based on an established single fluid, steady, dissipationless, magnetohydrodynamic continuum model, and is appropriate for the calculation of supersonic, super Alfvenic solar wind flow past terrestrial planets. A summary is provided of the important research results.

Utilization of Porous Media for Condensing Heat Exchangers

NASA Technical Reports Server (NTRS)

Tuan, George C.

2006-01-01

The use of porous media as a mean of separating liquid condensate from the air stream in condensing heat exchangers has been explored in the past inside small plant growth chambers and in the Apollo Command Module. Both applications used a cooled porous media made of sintered stainless steel to cool and separate condensation from the air stream. However, the main issues with the utilization of porous media in the past have been the deterioration of the porous media over long duration, such as clogging and changes in surface wetting characteristics. In addition, for long duration usage, biofilm growth from microorganisms on the porous medial would also be an issue. In developing Porous Media Condensing Heat Exchangers (PMCHX) for future space applications, different porous materials and microbial growth control methods will need to be explored. This paper explores the work performed at JSC and GRC to evaluate different porous materials and microbial control methods to support the development of a Porous Media Condensing Heat Exchanger. It outlines the basic principles for designing a PMCHX and issues that were encountered and ways to resolve those issues. The PMCHX has potential of mass, volume, and power savings over current CHX and water separator technology and would be beneficial for long duration space missions.

Nonenzymatic glucose sensor based on renewable electrospun Ni nanoparticle-loaded carbon nanofiber paste electrode.

PubMed

Liu, Yang; Teng, Hong; Hou, Haoqing; You, Tianyan

2009-07-15

A novel nonenzymatic glucose sensor was developed based on the renewable Ni nanoparticle-loaded carbon nanofiber paste (NiCFP) electrode. The NiCF nanocomposite was prepared by combination of electrospinning technique with thermal treatment method. The scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images showed that large amounts of spherical nanoparticles were well dispersed on the surface or embedded in the carbon nanofibers. And the nanoparticles were composed of Ni and NiO, as revealed by energy dispersive X-ray spectroscopy (EDX) and X-ray powder diffraction (XRD). In application to nonenzymatic glucose determination, the renewable NiCFP electrodes, which were constructed by simply mixing the electrospun nanocomposite with mineral oil, exhibited strong and fast amperometric response without being poisoned by chloride ions. Low detection limit of 1 microM with wide linear range from 2 microM to 2.5 mM (R=0.9997) could be obtained. The current response of the proposed glucose sensor was highly sensitive and stable, attributing to the electrocatalytic performance of the firmly embedded Ni nanoparticles as well as the chemical inertness of the carbon-based electrode. The good analytical performance, low cost and straightforward preparation method made this novel electrode material promising for the development of effective glucose sensor.

Regression to the Mean and Changes in Risk Behavior following Study Enrollment in a Cohort of US Women at Risk for HIV

PubMed Central

Hughes, James P.; Haley, Danielle F.; Frew, Paula M.; Golin, Carol E.; Adimora, Adaora A; Kuo, Irene; Justman, Jessica; Soto-Torres, Lydia; Wang, Jing; Hodder, Sally

2015-01-01

Purpose Reductions in risk behaviors are common following enrollment in HIV prevention studies. We develop methods to quantify the proportion of change in risk behaviors that can be attributed to regression to the mean versus study participation and other factors. Methods A novel model that incorporates both regression to the mean and study participation effects is developed for binary measures. The model is used to estimate the proportion of change in the prevalence of “unprotected sex in the past 6 months” that can be attributed to study participation versus regression to the mean in a longitudinal cohort of women at risk for HIV infection who were recruited from ten US communities with high rates of HIV and poverty. HIV risk behaviors were evaluated using audio computer-assisted self-interviews at baseline and every 6 months for up to 12 months. Results The prevalence of “unprotected sex in the past 6 months” declined from 96% at baseline to 77% at 12 months. However, this change could be almost completely explained by regression to the mean. Conclusions Analyses that examine changes over time in cohorts selected for high or low risk behaviors should account for regression to the mean effects. PMID:25883065

3DHZETRN: Inhomogeneous Geometry Issues

NASA Technical Reports Server (NTRS)

Wilson, John W.; Slaba, Tony C.; Badavi, Francis F.

2017-01-01

Historical methods for assessing radiation exposure inside complicated geometries for space applications were limited by computational constraints and lack of knowledge associated with nuclear processes occurring over a broad range of particles and energies. Various methods were developed and utilized to simplify geometric representations and enable coupling with simplified but efficient particle transport codes. Recent transport code development efforts, leading to 3DHZETRN, now enable such approximate methods to be carefully assessed to determine if past exposure analyses and validation efforts based on those approximate methods need to be revisited. In this work, historical methods of representing inhomogeneous spacecraft geometry for radiation protection analysis are first reviewed. Two inhomogeneous geometry cases, previously studied with 3DHZETRN and Monte Carlo codes, are considered with various levels of geometric approximation. Fluence, dose, and dose equivalent values are computed in all cases and compared. It is found that although these historical geometry approximations can induce large errors in neutron fluences up to 100 MeV, errors on dose and dose equivalent are modest (<10%) for the cases studied here.

MR Guided PET Image Reconstruction

PubMed Central

Bai, Bing; Li, Quanzheng; Leahy, Richard M.

2013-01-01

The resolution of PET images is limited by the physics of positron-electron annihilation and instrumentation for photon coincidence detection. Model based methods that incorporate accurate physical and statistical models have produced significant improvements in reconstructed image quality when compared to filtered backprojection reconstruction methods. However, it has often been suggested that by incorporating anatomical information, the resolution and noise properties of PET images could be improved, leading to better quantitation or lesion detection. With the recent development of combined MR-PET scanners, it is possible to collect intrinsically co-registered MR images. It is therefore now possible to routinely make use of anatomical information in PET reconstruction, provided appropriate methods are available. In this paper we review research efforts over the past 20 years to develop these methods. We discuss approaches based on the use of both Markov random field priors and joint information or entropy measures. The general framework for these methods is described and their performance and longer term potential and limitations discussed. PMID:23178087

Non-spherical micro- and nanoparticles: fabrication, characterization and drug delivery applications.

PubMed

Mathaes, Roman; Winter, Gerhard; Besheer, Ahmed; Engert, Julia

2015-03-01

Micro- and nanoparticles in drug and vaccine delivery have opened up new possibilities in pharmaceutics. In the past, researchers focused mainly on particle size, surface chemistry and the use of various materials to control particle characteristics and functions. Lately, shape has been acknowledged as an important design parameter having an impact on the interaction with biological systems. In this review, we report on the latest developments in fabrication methods to tailor particle geometry, summarize analytical techniques for non-spherical particles and highlight the most important findings regarding their interaction with biological systems and their potential applications in drug delivery. The impact of shape on particle internalization into different cell types and particle biodistribution has been extensively studied in the past. Current research focuses on shape-dependent uptake mechanisms and applications for tumour therapy and vaccination. Different fabrication methods can be used to produce a variety of different particle types and shapes. Key challenges will be the transfer of new non-spherical particle fabrication methods from lab-scale to industrial large-scale production. Not all techniques may be scalable for the production of high quantities of particles. It will also be challenging to transfer the promising in vitro findings to suitable in vivo models.

A new back-and-forth iterative method for time-reversed convection modeling: Implications for the Cenozoic evolution of 3-D structure and dynamics of the mantle

NASA Astrophysics Data System (ADS)

Glišović, Petar; Forte, Alessandro M.

2016-06-01

The 3-D distribution of buoyancy in the convecting mantle drives a suite of convection-related manifestations. Although seismic tomography is providing increasingly resolved images of the present-day mantle heterogeneity, the distribution of mantle density variations in the geological past is unknown, and, by implication, this is true for the convection-related observables. The one major exception is tectonic plate motions, since geologic data are available to estimate their history and they currently provide the only available constraints on the evolution of 3-D mantle buoyancy in the past. We developed a new back-and-forth iterative method for time-reversed convection modeling with a procedure for matching plate velocity data at different instants in the past. The crucial aspect of this reconstruction methodology is to ensure that at all times plates are driven by buoyancy forces in the mantle and not vice versa. Employing tomography-based retrodictions over the Cenozoic, we estimate the global amplitude of the following observables: dynamic surface topography, the core-mantle boundary ellipticity, the free-air gravity anomalies, and the global divergence rates of tectonic plates. One of the major benefits of the new data assimilation method is the stable recovery of much shorter wavelength changes in heterogeneity than was possible in our previous work. We now resolve what appears to be two-stage subduction of the Farallon plate under the western U.S. and a deeply rooted East African Plume that is active under the Ethiopian volcanic fields during the Early Eocene.

The Sensitivity Analysis for the Flow Past Obstacles Problem with Respect to the Reynolds Number

PubMed Central

Ito, Kazufumi; Li, Zhilin; Qiao, Zhonghua

2013-01-01

In this paper, numerical sensitivity analysis with respect to the Reynolds number for the flow past obstacle problem is presented. To carry out such analysis, at each time step, we need to solve the incompressible Navier-Stokes equations on irregular domains twice, one for the primary variables; the other is for the sensitivity variables with homogeneous boundary conditions. The Navier-Stokes solver is the augmented immersed interface method for Navier-Stokes equations on irregular domains. One of the most important contribution of this paper is that our analysis can predict the critical Reynolds number at which the vortex shading begins to develop in the wake of the obstacle. Some interesting experiments are shown to illustrate how the critical Reynolds number varies with different geometric settings. PMID:24910780

The Sensitivity Analysis for the Flow Past Obstacles Problem with Respect to the Reynolds Number.

PubMed

Ito, Kazufumi; Li, Zhilin; Qiao, Zhonghua

2012-02-01

In this paper, numerical sensitivity analysis with respect to the Reynolds number for the flow past obstacle problem is presented. To carry out such analysis, at each time step, we need to solve the incompressible Navier-Stokes equations on irregular domains twice, one for the primary variables; the other is for the sensitivity variables with homogeneous boundary conditions. The Navier-Stokes solver is the augmented immersed interface method for Navier-Stokes equations on irregular domains. One of the most important contribution of this paper is that our analysis can predict the critical Reynolds number at which the vortex shading begins to develop in the wake of the obstacle. Some interesting experiments are shown to illustrate how the critical Reynolds number varies with different geometric settings.

Radiant heat fluxes in supersonic flow of an inviscid gas past three-dimensional bodies

NASA Astrophysics Data System (ADS)

Apshtein, E. Z.; Vartanian, N. V.; Sakharov, V. I.; Tirskii, G. A.

Supersonic flow of an inviscid non-heat-conducting gas past three-dimensional bodies of various shapes (spheres, ellipsoids, hyperboloids, paraboloids, and power-law bodies of revolution) in the earth atmosphere is investigated numerically in the velocity range 10-18 km/s for heights of 40-80 km and densities of the incoming flow ranging from 0.003 to 0.00017 kg/cu m. It is shown that, at a constant flight velocity, the ratio of the radiant heat flux to the flux at the critical point is largely determined by the angle of the shock wave and is practically independent of the body dimensions and flight height. The results are used to develop a simplified method for determining radiant fluxes toward the nose section of three-dimensional bodies.

Construction of a carbon ionic liquid paste electrode based on multi-walled carbon nanotubes-synthesized Schiff base composite for trace electrochemical detection of cadmium.

PubMed

Afkhami, Abbas; Khoshsafar, Hosein; Bagheri, Hasan; Madrakian, Tayyebeh

2014-02-01

A simple, highly sensitive and selective carbon nanocomposite electrode has been developed for the electrochemical trace determination of cadmium. This sensor was designed by incorporation of multi-walled carbon nanotubes (MWCNTs) and a new synthesized Schiff base into the carbon paste ionic liquid electrode (CPE(IL)) which provides remarkably improved sensitivity and selectivity for the electrochemical stripping assay of Cd(II). The detection limit of the method was found to be 0.08 μg L(-1) (S/N=3) that is lower than the maximum contaminant level of Cd(II) allowed by the Environmental Protection Agency (EPA) in standard drinking waters. The proposed electrode exhibits good applicability for monitoring Cd(II) in various real samples. © 2013.

Synthesis of Helical Carbon Fibers and Related Materials: A Review on the Past and Recent Developments

PubMed Central

Raghubanshi, Himanshu; Dikio, Ezekiel Dixon

2015-01-01

Helical carbon fibers (HCFs) have been widely studied due to their unique helical morphology and superior properties, which make them efficient materials for several potential applications. This review summarizes the past and current advancement on the synthesis of HCFs. The review focuses and discusses synthesis strategies and effect of experimental parameters on the growth of HCFs. The effect of preparation method of catalyst, catalyst nature, catalyst composition, catalyst size, catalyst initial and final shape, reaction temperature, reaction time, carbon source, impurities, and electromagnetic field on the growth of HCFs is reviewed. We also discuss the growth mechanism for HCFs and the synthesis of HCFs related materials. Finally, we conclude with a brief summary and an outlook on the challenges and future prospects of HCFs. PMID:28347045

The Use of an Orthopaedic Rating System in Major League Baseball

PubMed Central

McGahan, Patrick J.; Fronek, Jan; Hoenecke, Heinz R.; Keefe, Daniel

2014-01-01

Background: Although the majority of Major League Baseball teams use an orthopaedic rating system to evaluate draft picks, little has been published on the topic. Hypothesis: Our goal was to assess the attitudes among Major League Baseball physicians regarding 3 common diagnoses in pitching prospects, through the use of an orthopaedic rating system. Our hypothesis was that the assigned orthopaedic grades would vary among physicians, diagnoses, and operative-versus-nonoperative and recent-versus-past treatment. Study Design: Survey. Level of Evidence: Level 4. Methods: A survey in the form of 12 clinical vignettes was used to query Major League Baseball physicians regarding ulnar collateral ligament (UCL) injuries, type II superior labrum anterior posterior (SLAP) tears, and internal impingement. Respondents graded draft picks using an orthopaedic rating system. The vignettes covered both operative and nonoperative and recent and past treatment (successful return to pitching for 1 year). Results: The orthopaedic grades assigned by respondents were as follows (minimal, moderate, severe risk): past UCL reconstruction (73%, 27%, 0%), recent UCL reconstruction (19%, 77%, 4%), past UCL strain (28%, 60%, 12%), recent UCL strain (0%, 48%, 52%), past SLAP repair (52%, 48%, 0%), recent SLAP repair (4%, 64%, 32%), past SLAP nonoperative (28%, 60%, 12%), recent SLAP nonoperative (0%, 36%, 64%), past internal impingement operative (24%, 68%, 8%), recent internal impingement operative (8%, 32%, 60%), past internal impingement nonoperative (24%, 68%, 8%), and recent internal impingement nonoperative (4%, 48%, 44%). Conclusion: Team physicians are optimistic regarding the outcome of UCL reconstruction. In contrast, UCL strains, type II SLAP lesions, and internal impingement carry a guarded prognosis. For all diagnoses, regardless of treatment, the prognosis improved if a player returned to pitching for 1 full season. Clinical Relevance: This study represents a first step toward developing a standardized orthopaedic rating system that will facilitate more accurate player assessment and clearer communication among physicians. PMID:25177423

Screenee perception and health-related quality of life in colorectal cancer screening: a review.

PubMed

Pizzo, Elena; Pezzoli, Alessandro; Stockbrugger, Reinhold; Bracci, Enrico; Vagnoni, Emidia; Gullini, Sergio

2011-01-01

Screening for colorectal cancer (CRC) has become established to varying degrees in several Western countries for the past 30 years. Because of its effectiveness, screening has been adopted or is planned in a number of other countries. In most countries, the screening method (e.g., fecal occult blood test [FOBT], sigmoidoscopy) is followed by colonoscopy, for verification. In other countries (e.g., United States, Germany), colonoscopy is the preferred first-line investigation method. However, because colonoscopy is considered to be invasive, might be poorly tolerated, and can be associated with complications, the idea of adopting colonoscopy as the primary screening method suffers. Negative effects of screening methods can reduce participation in programs and thereby negate the desired effect on individual and societal health. At present, there is no generally accepted method either to assess the perception and satisfaction of patients screened or the outcome of the screening procedures in CRC. In this review, we discuss the past development and present availability of instruments to measure health-related quality of life (HRQoL), the scarce studies in which such instruments have been used in screening campaigns, and the findings. We suggest the creation of a specific instrument for the assessment of HRQoL in CRC screening. Copyright © 2011 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Investigation on the potential of waste cooking oil as a grinding aid in Portland cement.

PubMed

Li, Haoxin; Zhao, Jianfeng; Huang, Yuyan; Jiang, Zhengwu; Yang, Xiaojie; Yang, Zhenghong; Chen, Qing

2016-12-15

Although there are several methods for managing waste cooking oil (WCO), a significant result has not been achieved in China. A new method is required for safe WCO management that minimizes the environmental threat. In this context, this work was developed in which cement clinker and gypsum were interground with various WCOs, and their properties, such as grindability, water-cement ratio required to achieve a normal consistency, setting times, compressive strength, contents of calcium hydroxide and ettringite in the hardened paste, microstructure and economic and environmental considerations, were addressed in detail. The results show that, overall, WCO favorably improves cement grinding. WCO prolonged the cement setting times and resulted in longer setting times. Additionally, more remarkable effects were found in cements in which WCO contained more unsaturated fatty acid. WCOs increased the cement strength. However, this enhancement was rated with respect to the WCO contents and components. WCOs decreased the CH and AFt contents in the cement hardened paste. Even the AFt content at later ages was reduced when WCO was used. WCO also densify microstructure of the hardened cement paste. It is economically and environmentally feasible to use WCOs as grinding aids in the cement grinding process. These results contribute to the application of WCOs as grinding aids and to the safe management of WCO. Copyright © 2016 Elsevier Ltd. All rights reserved.

Genome-Wide Profiling of DNA Double-Strand Breaks by the BLESS and BLISS Methods.

PubMed

Mirzazadeh, Reza; Kallas, Tomasz; Bienko, Magda; Crosetto, Nicola

2018-01-01

DNA double-strand breaks (DSBs) are major DNA lesions that are constantly formed during physiological processes such as DNA replication, transcription, and recombination, or as a result of exogenous agents such as ionizing radiation, radiomimetic drugs, and genome editing nucleases. Unrepaired DSBs threaten genomic stability by leading to the formation of potentially oncogenic rearrangements such as translocations. In past few years, several methods based on next-generation sequencing (NGS) have been developed to study the genome-wide distribution of DSBs or their conversion to translocation events. We developed Breaks Labeling, Enrichment on Streptavidin, and Sequencing (BLESS), which was the first method for direct labeling of DSBs in situ followed by their genome-wide mapping at nucleotide resolution (Crosetto et al., Nat Methods 10:361-365, 2013). Recently, we have further expanded the quantitative nature, applicability, and scalability of BLESS by developing Breaks Labeling In Situ and Sequencing (BLISS) (Yan et al., Nat Commun 8:15058, 2017). Here, we first present an overview of existing methods for genome-wide localization of DSBs, and then focus on the BLESS and BLISS methods, discussing different assay design options depending on the sample type and application.

History and perspectives of bioanalytical methods for chemical warfare agent detection.

PubMed

Black, Robin M

2010-05-15

This paper provides a short historical overview of the development of bioanalytical methods for chemical warfare (CW) agents and their biological markers of exposure, with a more detailed overview of methods for organophosphorus nerve agents. Bioanalytical methods for unchanged CW agents are used primarily for toxicokinetic/toxicodynamic studies. An important aspect of nerve agent toxicokinetics is the different biological activity and detoxification pathways for enantiomers. CW agents have a relatively short lifetime in the human body, and are hydrolysed, metabolised, or adducted to nucleophilic sites on macromolecules such as proteins and DNA. These provide biological markers of exposure. In the past two decades, metabolites, protein adducts of nerve agents, vesicants and phosgene, and DNA adducts of sulfur and nitrogen mustards, have been identified and characterized. Sensitive analytical methods have been developed for their detection, based mainly on mass spectrometry combined with gas or liquid chromatography. Biological markers for sarin, VX and sulfur mustard have been validated in cases of accidental and deliberate human exposures. The concern for terrorist use of CW agents has stimulated the development of higher throughput analytical methods in support of homeland security. Copyright (c) 2010. Published by Elsevier B.V.

A Brief History of Evolving Diagnostics and Therapy for Gonorrhea: Lessons Learned.

PubMed

Hook, Edward W; Kirkcaldy, Robert D

2018-04-05

Progressively decreasing susceptibility of Neisseria gonorrhoeae to the antibiotics recommended for treatment has raised concerns about the public health threat of antibiotic resistant gonorrhea. This is not a new process and the organism has reliably developed resistance to all modern antibiotics used for treatment since the dawn of the antibiotic era. The history of changing recommendations for gonorrhea therapy however is complex and has been influenced by diagnostic test methods and surveillance. Understanding the impact of these influences may provide insights into current approaches to address this re-emerging public health challenge. We reviewed available literature on gonococcal susceptibility to therapeutic agents since the 1930s, changing methods for gonorrhea diagnosis, and public health recommendations for gonorrhea treatment. The literature review was supplemented by qualitative interviews with senior investigators who helped to shape gonorrhea management strategies over the past 50 years. The process of development of antimicrobial resistance to the antibiotics widely used for treatment appears to be an inexorable process. Many currently voiced concerns are similar to those raised in the past. The public health threat of increasing antimicrobial resistance by N. gonorrhoeae has been amplified as a result of a smaller pipeline introducing new drugs for gonorrhea treatment. Improved methods for gonorrhea diagnosis have also repeatedly influenced appreciation of the burden of disease caused by N. gonorrhoeae. U.S. Public Health Service leadership has also shaped and improved the management of this important public health problem.

Analysis of porosity distribution of large-scale porous media and their reconstruction by Langevin equation.

PubMed

Jafari, G Reza; Sahimi, Muhammad; Rasaei, M Reza; Tabar, M Reza Rahimi

2011-02-01

Several methods have been developed in the past for analyzing the porosity and other types of well logs for large-scale porous media, such as oil reservoirs, as well as their permeability distributions. We developed a method for analyzing the porosity logs ϕ(h) (where h is the depth) and similar data that are often nonstationary stochastic series. In this method one first generates a new stationary series based on the original data, and then analyzes the resulting series. It is shown that the series based on the successive increments of the log y(h)=ϕ(h+δh)-ϕ(h) is a stationary and Markov process, characterized by a Markov length scale h(M). The coefficients of the Kramers-Moyal expansion for the conditional probability density function (PDF) P(y,h|y(0),h(0)) are then computed. The resulting PDFs satisfy a Fokker-Planck (FP) equation, which is equivalent to a Langevin equation for y(h) that provides probabilistic predictions for the porosity logs. We also show that the Hurst exponent H of the self-affine distributions, which have been used in the past to describe the porosity logs, is directly linked to the drift and diffusion coefficients that we compute for the FP equation. Also computed are the level-crossing probabilities that provide insight into identifying the high or low values of the porosity beyond the depth interval in which the data have been measured. ©2011 American Physical Society

Innovative methods in soil phosphorus research: A review

PubMed Central

Kruse, Jens; Abraham, Marion; Amelung, Wulf; Baum, Christel; Bol, Roland; Kühn, Oliver; Lewandowski, Hans; Niederberger, Jörg; Oelmann, Yvonne; Rüger, Christopher; Santner, Jakob; Siebers, Meike; Siebers, Nina; Spohn, Marie; Vestergren, Johan; Vogts, Angela; Leinweber, Peter

2015-01-01

Phosphorus (P) is an indispensable element for all life on Earth and, during the past decade, concerns about the future of its global supply have stimulated much research on soil P and method development. This review provides an overview of advanced state-of-the-art methods currently used in soil P research. These involve bulk and spatially resolved spectroscopic and spectrometric P speciation methods (1 and 2D NMR, IR, Raman, Q-TOF MS/MS, high resolution-MS, NanoSIMS, XRF, XPS, (µ)XAS) as well as methods for assessing soil P reactions (sorption isotherms, quantum-chemical modeling, microbial biomass P, enzymes activity, DGT, 33P isotopic exchange, 18O isotope ratios). Required experimental set-ups and the potentials and limitations of individual methods present a guide for the selection of most suitable methods or combinations. PMID:26167132

Preparation and evaluation of lignosulfonates as a dispersant for gypsum paste from acid hydrolysis lignin.

PubMed

Matsushita, Yasuyuki; Yasuda, Seiichi

2005-03-01

In order to effectively utilize a by-product of the acid saccharification process of woody materials, the chemical conversion of guaiacyl sulfuric acid lignin (SAL), one of the acid hydrolysis lignins, into water-soluble sulfonated products with high dispersibitity was investigated. At first, SAL was phenolated (P-SAL) to enhance the solubility and reactivity. Lignosulfonates were prepared from P-SAL by three methods of hydroxymethylation followed by neutral sulfonation (two-step method), sulfomethylation (one-step method) and arylsulfonation. Surprisingly, all prepared lignosulfonates possessed 30 to 70% higher dispersibility for gypsum paste than the commercial lignosulfonate. Evaluation of the preparations for gypsum paste suggested that the higher molecular weights and sulfur contents of the preparations increased their dispersibility.

Erasure of memory in paste by irradiation of ultrasonic waves

NASA Astrophysics Data System (ADS)

Nakahara, Akio; Yoneyama, Ryota; Ito, Maruto; Matsuo, Yousuke; Kitsunezaki, So

2017-06-01

Densely packed colloidal suspension, called paste, remembers the direction of applied forces, such as vibration and flow, and these memories kept in paste can be visualized as morphology of desiccation crack patterns. For example, when the paste remembers the direction of vibration, all primary cracks propagate in the direction perpendicular to the direction of initial vibration. On the other hand, when the paste remembers the direction of flow, all primary cracks propagate along the direction of initial flow. These results indicate that external forces imprint easy-breakable direction into paste as memories. Therefore, by controlling memories in paste, we can tune to produce various types of crack patterns, such as cellular, radial, lamellar, ring, spiral and lattice structures. Recently we have found that memories in paste can be erased by the irradiation of ultrasonic waves to paste as we obtain only isotropic and cellular crack patterns without any anisotropy related to memory effect. This method can be applied to increase the breaking strength of dried paste by homogenizing microstructure in paste.

The method of complex characteristics for design of transonic blade sections

NASA Technical Reports Server (NTRS)

Bledsoe, M. R.

1986-01-01

A variety of computational methods were developed to obtain shockless or near shockless flow past two-dimensional airfoils. The approach used was the method of complex characteristics, which determines smooth solutions to the transonic flow equations based on an input speed distribution. General results from fluid mechanics are presented. An account of the method of complex characteristics is given including a description of the particular spaces and coordinates, conformal transformations, and numerical procedures that are used. The operation of the computer program COMPRES is presented along with examples of blade sections designed with the code. A user manual is included with a glossary to provide additional information which may be helpful. The computer program in Fortran, including numerous comment cards is listed.

Molecular testing for clinical diagnosis and epidemiological investigations of intestinal parasitic infections.

PubMed

Verweij, Jaco J; Stensvold, C Rune

2014-04-01

Over the past few decades, nucleic acid-based methods have been developed for the diagnosis of intestinal parasitic infections. Advantages of nucleic acid-based methods are numerous; typically, these include increased sensitivity and specificity and simpler standardization of diagnostic procedures. DNA samples can also be stored and used for genetic characterization and molecular typing, providing a valuable tool for surveys and surveillance studies. A variety of technologies have been applied, and some specific and general pitfalls and limitations have been identified. This review provides an overview of the multitude of methods that have been reported for the detection of intestinal parasites and offers some guidance in applying these methods in the clinical laboratory and in epidemiological studies.

Molecular Testing for Clinical Diagnosis and Epidemiological Investigations of Intestinal Parasitic Infections

PubMed Central

Stensvold, C. Rune

2014-01-01

SUMMARY Over the past few decades, nucleic acid-based methods have been developed for the diagnosis of intestinal parasitic infections. Advantages of nucleic acid-based methods are numerous; typically, these include increased sensitivity and specificity and simpler standardization of diagnostic procedures. DNA samples can also be stored and used for genetic characterization and molecular typing, providing a valuable tool for surveys and surveillance studies. A variety of technologies have been applied, and some specific and general pitfalls and limitations have been identified. This review provides an overview of the multitude of methods that have been reported for the detection of intestinal parasites and offers some guidance in applying these methods in the clinical laboratory and in epidemiological studies. PMID:24696439

A Science-Based Understanding of Cermet Processing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cesarano, III, Joseph; Roach, Robert Allen; Kilgo, Alice C.

2006-04-01

This report is a summary of the work completed in FY01 for science-based characterization of the processes used to fabricate 1) cermet vias in source feedthrus using slurry and paste-filling techniques and 2) cermet powder for dry pressing. Common defects found in cermet vias were characterized based on the ability of subsequent processing techniques (isopressing and firing) to remove the defects. Non-aqueous spray drying and mist granulation techniques were explored as alternative methods of creating CND50, the powder commonly used for dry pressed parts. Compaction and flow characteristics of these techniques were analyzed and compared to standard dry-ball-milled CND50. Duemore » to processing changes, changes in microstructure can occur. A microstructure characterization technique was developed to numerically describe cermet microstructure. Machining and electrical properties of dry pressed parts were also analyzed and related to microstructure using this analytical technique.3 Executive SummaryThis report outlines accomplishments in the science-based understanding of cermet processing up to fiscal year 2002 for Sandia National Laboratories. The three main areas of work are centered on 1) increasing production yields of slurry-filled cermets, 2) evaluating the viability of high-solids-loading pastes for the same cermet components, and 3) optimizing cermet powder used in pressing processes (CND50). An additional development that was created as a result of the effort to fully understand the impacts of alternative processing techniques is the use of analytical methods to relate microstructure to physical properties. Recommendations are suggested at the end of this report. Summaries of these four efforts are as follows:1.Increase Production Yields of Slurry-Filled Cermet Vias Finalized slurry filling criteria were determined based on three designs of experiments where the following factors were analyzed: vacuum time, solids loading, pressure drop across the filter paper, slurry injection rate, via prewetting, slurry injection angle, filter paper prewetting, and slurry mixing time. Many of these factors did not have an influence on defect formation. In order of decreasing importance, critical factors for defect formation by slurry filling are vacuum time (20 sec. optimal), slurry solids loading (20.0 g of cermet with 13.00 g of DGBEA solvent (21.2 vol%)), filling with the pipette in a vertical position, and faster injection rates (%7E765 l/s) as preferable to slower. No further recommendations for improvement to this process can be suggested. All findings of the slurry filling process have been transferred to CeramTec, the supplier. Paste filling methods appear to show more promise of increasing production yields. The types of flaws commonly found in slurry-filled vias were identified and followed throughout the entire source feedthru process. In general, all sizes of cracks healed during isopressing and firing steps. Additionally, small to medium sized voids (less than 1/3 the via diameter) can be healed. Porosity will usually lead to via necking, which may cause the part to be out of specification. Large voids (greater 4 than 1/3 of the diameter) and partial fills are not healed or produce significant necking. 2.Viability of High-Solids-Loading-Cermet Paste for Filling Source Feedthru ViaThe paste-filling process is easy to implement and easier to use. The high solids loading (>40 vol %) reduces the incidence of drying defects, which are seen in slurry filled (%7E23 vol %) vias. Additionally, the way in which the vias are filled (the paste is pushed from entrance to exit, displacing air as the paste front progresses), reduces the chance of entrapped voids, which are common in the slurry filling process. From the fair number of samples already filled, the likelihood of this process being a viable and reliable process is very good. Issues of concern for the paste process, as with any new process, are any problems that may arise in subsequent manufacturing stages of the neutron tube that may be affected by subtle changes in microstructure. Both MC4277 and MC4300-type source feedthrus were paste-filled by hand. X-ray analysis showed a much lower existence of voids in the green parts as compared to slurry-filled parts. The paste shows improvements in shelf life (weeks) as compared to slurry (minutes). This method of introducing the cermet to the via also lends itself very well to an automated filling process where a machine can either drill vias or, with the aid of a vision system, find pre-drilled vias and fill them with paste. The pastes used in this work prove the concept of this automated filling process as MC4277 sources have been filled using such a prototype machine, however, better performing pastes can be developed which are less hazardous (aqueous systems). The paste process was also used to successfully fill MC4300 "dogleg" type sources.3.Optimize CND50 Two methods of creating granulated cermet powder for comparison with dry-ball milled CND50 were explored. The first method, non-aqueous spray drying, was performed at Niro Inc. used a 40/60 (wt %) ethanol/toluene solvent and three binder systems; polyvinyl butyral (B79), ethylcellulose (Ethocel), and hydroxypropylcellulose (Klucel). Due to the nature of small spray-dry systems, an excess amount of fines was present in the granulated powder, which may have contributed to the low angles of repose (68 to 78). This is a moderate increase in 5 flowability as standard dry-ball milled powder possesses an angle of repose of 79-89. Mist granulated powders were produced with a tert-butanol solvent and polyvinyl butyral binder system. The angles of repose were more promising (28). More investigation into the mist granulation method is required. Also, aqueous spray drying may be possible with cermet and should be explored. Compaction of all granulated powders is much closer to a proven pressing powder (Sandi94 - angle of repose 29) which should allow cermet to be pressed to near net shape where die filling is difficult for non-flowing powders.4.Microstructure Characterization An analytical technique was developed to numerically characterize microstructures in terms of molybdenum dispersion, homogeneity, and percolation indices. This technique was applied to dry-ball-milled samples of various ball-milling times (0.5 to 20 hours). Significant change in the microstructure could be seen with milling time. Increased milling time caused agglomeration of molybdenum particles, increasing the percolation index, whereas short milling times promoted higher dispersion indices. This phenomenon is contrary to conventional understanding of mixing. However, conventional ball milling does not usually incorporate granules with binder and separate particles. This discrepancy may explain the odd mixing behavior. It is important to note that the high percolation index possessed by long ball mill times showed lower electrical resistance than low-percolation-index microstructures. However, machinability of high percolation, low-dispersion-index microstructures were poor as compared to microstructures with high dispersion indices and moderate percolation indices. This trade-off between dispersion and percolation (at constant molybdenum levels) suggests that microstructures can be achieved that posses good mechanical and electrical properties. Coincidentally, microstructures that satisfy this condition are produced by the standard dry-ball-milled CND50 (4 hour ball mill time). The performance and sensitivity of the microstructure characterization technique should be evaluated, specifically for electrical conductivity. Processing techniques to decrease the percolation index (lowering molybdenum content, excess ball milling, 6 larger molybdenum particles, etc.) should be employed to determine the point where cermet is not conductive or falls below electrical conduction specifications.7« less

BetaTPred: prediction of beta-TURNS in a protein using statistical algorithms.

PubMed

Kaur, Harpreet; Raghava, G P S

2002-03-01

beta-turns play an important role from a structural and functional point of view. beta-turns are the most common type of non-repetitive structures in proteins and comprise on average, 25% of the residues. In the past numerous methods have been developed to predict beta-turns in a protein. Most of these prediction methods are based on statistical approaches. In order to utilize the full potential of these methods, there is a need to develop a web server. This paper describes a web server called BetaTPred, developed for predicting beta-TURNS in a protein from its amino acid sequence. BetaTPred allows the user to predict turns in a protein using existing statistical algorithms. It also allows to predict different types of beta-TURNS e.g. type I, I', II, II', VI, VIII and non-specific. This server assists the users in predicting the consensus beta-TURNS in a protein. The server is accessible from http://imtech.res.in/raghava/betatpred/

Koopman operator theory: Past, present, and future

NASA Astrophysics Data System (ADS)

Brunton, Steven; Kaiser, Eurika; Kutz, Nathan

2017-11-01

Koopman operator theory has emerged as a dominant method to represent nonlinear dynamics in terms of an infinite-dimensional linear operator. The Koopman operator acts on the space of all possible measurement functions of the system state, advancing these measurements with the flow of the dynamics. A linear representation of nonlinear dynamics has tremendous potential to enable the prediction, estimation, and control of nonlinear systems with standard textbook methods developed for linear systems. Dynamic mode decomposition has become the leading data-driven method to approximate the Koopman operator, although there are still open questions and challenges around how to obtain accurate approximations for strongly nonlinear systems. This talk will provide an introductory overview of modern Koopman operator theory, reviewing the basics and describing recent theoretical and algorithmic developments. Particular emphasis will be placed on the use of data-driven Koopman theory to characterize and control high-dimensional fluid dynamic systems. This talk will also address key advances in the rapidly growing fields of machine learning and data science that are likely to drive future developments.

Concepts in ecological risk assessment. Professional paper

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnston, R.K.; Seligman, P.F.

1991-05-01

Assessing the risk of impact to natural ecosystems from xenobiotic compounds requires an accurate characterization of the threatened ecosystem, direct measures or estimates of environmental exposure, and a comprehensive evaluation of the biological effects from actual and potential contamination. Field and laboratory methods have been developed to obtain direct measures of environmental health. These methods have been implemented in monitoring programs to assess and verify the ecological risks of contamination from past events, such as hazardous waste disposal sites, as well as future scenarios, such as the environmental consequences from the use of biocides in antifouling bottom paints for ships.

Dissecting the genetics of complex traits using summary association statistics.

PubMed

Pasaniuc, Bogdan; Price, Alkes L

2017-02-01

During the past decade, genome-wide association studies (GWAS) have been used to successfully identify tens of thousands of genetic variants associated with complex traits and diseases. These studies have produced extensive repositories of genetic variation and trait measurements across large numbers of individuals, providing tremendous opportunities for further analyses. However, privacy concerns and other logistical considerations often limit access to individual-level genetic data, motivating the development of methods that analyse summary association statistics. Here, we review recent progress on statistical methods that leverage summary association data to gain insights into the genetic basis of complex traits and diseases.

Dissecting the genetics of complex traits using summary association statistics

PubMed Central

Pasaniuc, Bogdan; Price, Alkes L.

2017-01-01

During the past decade, genome-wide association studies (GWAS) have successfully identified tens of thousands of genetic variants associated with complex traits and diseases. These studies have produced extensive repositories of genetic variation and trait measurements across large numbers of individuals, providing tremendous opportunities for further analyses. However, privacy concerns and other logistical considerations often limit access to individual-level genetic data, motivating the development of methods that analyze summary association statistics. Here we review recent progress on statistical methods that leverage summary association data to gain insights into the genetic basis of complex traits and diseases. PMID:27840428

Methods for the Analysis of Protein Phosphorylation-Mediated Cellular Signaling Networks

NASA Astrophysics Data System (ADS)

White, Forest M.; Wolf-Yadlin, Alejandro

2016-06-01

Protein phosphorylation-mediated cellular signaling networks regulate almost all aspects of cell biology, including the responses to cellular stimulation and environmental alterations. These networks are highly complex and comprise hundreds of proteins and potentially thousands of phosphorylation sites. Multiple analytical methods have been developed over the past several decades to identify proteins and protein phosphorylation sites regulating cellular signaling, and to quantify the dynamic response of these sites to different cellular stimulation. Here we provide an overview of these methods, including the fundamental principles governing each method, their relative strengths and weaknesses, and some examples of how each method has been applied to the analysis of complex signaling networks. When applied correctly, each of these techniques can provide insight into the topology, dynamics, and regulation of protein phosphorylation signaling networks.

[Progress in industrial bioprocess engineering in China].

PubMed

Zhuang, Yingping; Chen, Hongzhang; Xia, Jianye; Tang, Wenjun; Zhao, Zhimin

2015-06-01

The advances of industrial biotechnology highly depend on the development of industrial bioprocess researches. In China, we are facing several challenges because of a huge national industrial fermentation capacity. The industrial bioprocess development experienced several main stages. This work mainly reviews the development of the industrial bioprocess in China during the past 30 or 40 years: including the early stage kinetics model study derived from classical chemical engineering, researching method based on control theory, multiple-parameter analysis techniques of on-line measuring instruments and techniques, and multi-scale analysis theory, and also solid state fermentation techniques and fermenters. In addition, the cutting edge of bioprocess engineering was also addressed.

Chemical genetics-based development of small molecules targeting hepatitis C virus.

PubMed

Jin, Guanghai; Lee, Jisu; Lee, Kyeong

2017-09-01

Hepatitis C virus (HCV) infection is a major worldwide problem that has emerged as one of the most significant diseases affecting humans. There are currently no vaccines or efficient therapies without side effects, despite today's advanced medical technology. Currently, the common therapy for most patients (i.e. genotype 1) is combination of HCV-specific direct-acting antivirals (DAAs). Up to 2011, the standard of care (SOC) was a combination of peg-IFNα with ribavirin (RBV). After approval of NS3/4A protease inhibitor, SOC was peg-IFNα and RBV with either the first-generation DAAs boceprevir or telaprevir. In the past several years, various novel small molecules have been discovered and some of them (i.e., HCV polymerase, protease, helicase and entry inhibitors) have undergone clinical trials. Between 2013 and 2016, the second-generation DAA drugs simeprevir, asunaprevir, daclatasvir, dasabuvir, sofosbuvir, and elbasvir were approved, as well as the combinational drugs Harvoni ® , Zepatier ® , Technivie ® , and Epclusa ® . A number of reviews have been recently published describing the structure-activity relationship (SAR) in the development of HCV inhibitors and outlining current therapeutic approaches to hepatitis C infection. Target identification involves studying a drug's mechanism of action (MOA), and a variety of target identification methods have been developed in the past few years. Chemical biology has emerged as a powerful tool for studying biological processes using small molecules. The use of chemical genetic methods is a valuable strategy for studying the molecular mechanisms of the viral lifecycle and screening for anti-viral agents. Two general screening approaches have been employed: forward and reverse chemical genetics. This review reveals information on the small molecules in HCV drug discovery by using chemical genetics for targeting the HCV protein and describes successful examples of targets identified with these methods.

Surface Mass Balance of the Greenland Ice Sheet Derived from Paleoclimate Reanalysis

NASA Astrophysics Data System (ADS)

Badgeley, J.; Steig, E. J.; Hakim, G. J.; Anderson, J.; Tardif, R.

2017-12-01

Modeling past ice-sheet behavior requires independent knowledge of past surface mass balance. Though models provide useful insight into ice-sheet response to climate forcing, if past climate is unknown, then ascertaining the rate and extent of past ice-sheet change is limited to geological and geophysical constraints. We use a novel data-assimilation framework developed under the Last Millennium Reanalysis Project (Hakim et al., 2016) to reconstruct past climate over ice sheets with the intent of creating an independent surface mass balance record for paleo ice-sheet modeling. Paleoclimate data assimilation combines the physics of climate models and the time series evidence of proxy records in an offline, ensemble-based approach. This framework allows for the assimilation of numerous proxy records and archive types while maintaining spatial consistency with known climate dynamics and physics captured by the models. In our reconstruction, we use the Community Climate System Model version 4, CMIP5 last millennium simulation (Taylor et al., 2012; Landrum et al., 2013) and a nearly complete database of ice core oxygen isotope records to reconstruct Holocene surface temperature and precipitation over the Greenland Ice Sheet on a decadal timescale. By applying a seasonality to this reconstruction (from the TraCE-21ka simulation; Liu et al., 2009), our reanalysis can be used in seasonally-based surface mass balance models. Here we discuss the methods behind our reanalysis and the performance of our reconstruction through prediction of unassimilated proxy records and comparison to paleoclimate reconstructions and reanalysis products.

Model-assisted development of a laminography inspection system

NASA Astrophysics Data System (ADS)

Grandin, R.; Gray, J.

2012-05-01

Traditional computed tomography (CT) is an effective method of determining the internal structure of an object through non-destructive means; however, inspection of certain objects, such as those with planar geometrics or with limited access, requires an alternate approach. An alternative is laminography and has been the focus of a number of researchers in the past decade for both medical and industrial inspections. Many research efforts rely on geometrically-simple analytical models, such as the Shepp-Logan phantom, for the development of their algorithms. Recent work at the Center for Non-Destructive Evaluation makes extensive use of a forward model, XRSIM, to study artifacts arising from the reconstruction method, the effects of complex geometries and known issues such as high density features on the laminography reconstruction process. The use of a model provides full knowledge of all aspects of the geometry and provides a means to quantitatively evaluate the impact of methods designed to reduce artifacts generated by the reconstruction methods or that are result of the part geometry. We will illustrate the use of forward simulations to quantitatively assess reconstruction algorithm development and artifact reduction.

The Importance of PRI Therapy for the Pastoral Counsellor

PubMed Central

2009-01-01

It is not always easy for pastoral counsellors to help people change. Often people have become stuck in their ways. Recent developments in the field of brain research help explain why change is difficult. This article discusses Past Reality Integration Therapy (PRI), a psychotherapeutic method that integrates recent findings of brain research and offers an important addition to the work of (pastoral) counsellors and psychotherapists. The use of this approach with Dutch students in their pastoral training is presented. Furthermore the importance of this new method for counsellors themselves, their clients and their work is discussed and some overall conclusions about the method and its practical application are presented. PMID:20835380

Study of grid independence of finite element method on MHD free convective casson fluid flow with slip effect

NASA Astrophysics Data System (ADS)

Raju, R. Srinivasa; Ramesh, K.

2018-05-01

The purpose of this work is to study the grid independence of finite element method on MHD Casson fluid flow past a vertically inclined plate filled in a porous medium in presence of chemical reaction, heat absorption, an external magnetic field and slip effect has been investigated. For this study of grid independence, a mathematical model is developed and analyzed by using appropriate mathematical technique, called finite element method. Grid study discussed with the help of numerical values of velocity, temperature and concentration profiles in tabular form. avourable comparisons with previously published work on various special cases of the problem are obtained.

Unplanned pregnancy: does past experience influence the use of a contraceptive method?

PubMed

Matteson, Kristen A; Peipert, Jeffrey F; Allsworth, Jenifer; Phipps, Maureen G; Redding, Colleen A

2006-01-01

To investigate whether women between the ages of 14 and 25 years with a past unplanned pregnancy were more likely to use a contraceptive method compared with women without a history of unplanned pregnancy. We analyzed baseline data of 424 nonpregnant women between the ages of 14 and 25 years enrolled in a randomized trial to prevent sexually transmitted diseases and unplanned pregnancy (Project PROTECT). Women at high risk for sexually transmitted diseases or unplanned pregnancy were included. Participants completed a demographic, substance use, and reproductive health questionnaire. We compared women with and without a history of unplanned pregnancy using bivariate analysis and log binomial regression. The prevalence of past unplanned pregnancy in this sample was 43%. Women reporting an unplanned pregnancy were older, and had less education, and were more likely to be nonwhite race or ethnicity. History of an unplanned pregnancy was not associated with usage of a contraceptive method (relative risk 1.01, 95% confidence interval 0.87-1.16) in bivariate analysis or when potential confounders were accounted for in the analysis (adjusted relative risk 1.10, 95% confidence interval 0.95-1.28). Several factors were associated with both unplanned pregnancy and overall contraceptive method use in this population. However, a past unplanned pregnancy was not associated with overall contraceptive method usage. Future studies are necessary to investigate the complex relationship between unplanned pregnancy and contraceptive method use. II-2.

Evaluating Behaviorally Oriented Aviation Maintenance Resource Management (MRM) Training and Programs: Methods, Results, and Conclusions

NASA Technical Reports Server (NTRS)

Taylor, James C.; Thomas, Robert L., III

2003-01-01

Assessment of the impact of Aviation Resource Management Programs on aviation culture and performance has compelled a considerable body of research (Taylor & Robertson, 1995; Taylor, 1998; Taylor & Patankar, 2001). In recent years new methods have been applied to the problem of maintenance error precipitated by factors such as the need for self-assessment of communication and trust. The present study - 2002 -- is an extension of that past work. This research project was designed as the conclusion of a larger effort to help understand, evaluate and validate the impact of Maintenance Resource Management (MRM) training programs, and other MRM interventions on participant attitudes, opinions, behaviors, and ultimately on enhanced safety performance. It includes research and development of evaluation methodology as well as examination of psychological constructs and correlates of maintainer performance. In particular, during 2002, three issues were addressed. First, the evaluation of two (independent & different) MRM programs for changing behaviors was undertaken. In one case we were able to further apply the approach to measuring written communication developed during 2001 (Taylor, 2002; Taylor & Thomas, 2003). Second, the MRM/TOQ surveys were made available for completion on the internet. The responses from these on-line surveys were automatically linked to a results calculator (like the one developed and described in Taylor, 2002) to aid industry users in analyzing and evaluating their local survey data on the internet. Third, the main trends and themes from our research about MRM programs over the past dozen years were reviewed.

Development of high dispersed TiO2 paste for transparent screen-printable self-cleaning coatings on glass

NASA Astrophysics Data System (ADS)

Wang, Yuanhao; Lu, Lin; Yang, Hongxing; Che, Quande

2013-01-01

This paper reports a cheap and facile method to fabricate transparent self-cleaning coatings on glass by screen-printing high dispersed TiO2 paste. Three kinds of ZrO2 beads with diameter of 2, 1, and 0.1-0.2 mm were utilized to investigate their influence on the grinding and dispersion of the commercial TiO2 powder in the ball mill. From the SEM images, surface profiler and transmittance spectrum it could be demonstrated that the smallest ZrO2 bead with the diameter of 0.1-0.2 mm was the best candidate to disperse the TiO2 powder into nanoscale size to make the high dispersed TiO2 paste which was the key factor to achieve a smooth, high transparent TiO2 coating. The surface wettability measurement showed that all the screen-printed coatings had super hydrophilic surfaces, which was independent to the surface morphology. However, the coating with the highest transparency showed the lowest photocatalytic activity which is mainly due to the light loss.

The experience of time in habitual teenage marijuana smokers.

PubMed

Dörr, Anneliese; Espinoza, Adriana; Acevedo, Jorge

2014-01-01

The research is qualitative; it studies the experience of time in young people who smoke marijuana in excess, given the high rate of smoking in the teenage years, a delicate stage regarding the planning of the future. Our objective is to see how the relationship between past and future plans is manifested in their biography, through goals and actions, in light of their ability to anticipate themselves. Our guiding principle is the ability to “anticipate oneself”, proposed by Sutter, a phenomenological psychiatrist. The information was obtained from the analysis of autobiographies of young persons through the hermeneutical phenomenological method developed by Lindseth, based on Ricoeur. The results reveal that in the biographies the past temporal dimension is characterized by poor descriptions, the present is where they extend themselves most, describing tastes, how they visualize themselves, but showing a lack of clarity in their interests. In the future we see the absence of reference, giving the impression of no progression from the past, and without awareness of the fact that the future possibilities or lack thereof are heavily dependent on present actions.

Improvement and evaluation of thermal, electrical, sealing and mechanical contacts, and their interface materials

NASA Astrophysics Data System (ADS)

Luo, Xiangcheng

Material contacts, including thermal, electrical, seating (fluid sealing and electromagnetic sealing) and mechanical (pressure) contacts, together with their interface materials, were, evaluated, and in some cases, improved beyond the state of the art. The evaluation involved the use of thermal, electrical and mechanical methods. For thermal contacts, this work evaluated and improved the heat transfer efficiency between two contacting components by developing various thermal interface pastes. Sodium silicate based thermal pastes (with boron nitride particles as the thermally conductive filler) as well as polyethylene glycol (PEG) based thermal pastes were developed and evaluated. The optimum volume fractions of BN in sodium silicate based pastes and PEG based pastes were 16% and 18% respectively. The contribution of Li+ ions to the thermal contact conductance in the PEG-based paste was confirmed. For electrical contacts, the relationship between the mechanical reliability and electrical reliability of solder/copper and silver-epoxy/copper joints was addressed. Mechanical pull-out testing was conducted on solder/copper and silver-epoxy/copper joints, while the contact electrical resistivity was measured. Cleansing of the copper surface was more effective for the reliability of silver-epoxy/copper joint than that of solder/copper joint. For sealing contacts, this work evaluated flexible graphite as an electromagnetic shielding gasket material. Flexible graphite was found to be at least comparable to conductive filled silicone (the state of the art) in terms of the shielding effectiveness. The conformability of flexible graphite with its mating metal surface under repeated compression was characterized by monitoring the contact electrical resistance, as the conformability is important to both electromagnetic scaling and fluid waling using flexible graphite. For mechanical contacts, this work focused on the correlation of the interface structure (such as elastic/plastic deformation, oxidation, strain hardening, passive layer damage, fracture, etc.) with the electrical contact resistance, which was measured in real time for contacts under dynamic compression, thus allowing both reversible and irreversible changes to be observed. The materials studied included metals (carbon steel, stainless steel, aluminum and copper), carbon fiber reinforced polymer-matrix composite (nylon-6), ceramic (mortar) and graphite, due to their relevance to fastening, concrete structures, electric brushes and electrical pressure contacts.

Meta-analysis and The Cochrane Collaboration: 20 years of the Cochrane Statistical Methods Group

PubMed Central

2013-01-01

The Statistical Methods Group has played a pivotal role in The Cochrane Collaboration over the past 20 years. The Statistical Methods Group has determined the direction of statistical methods used within Cochrane reviews, developed guidance for these methods, provided training, and continued to discuss and consider new and controversial issues in meta-analysis. The contribution of Statistical Methods Group members to the meta-analysis literature has been extensive and has helped to shape the wider meta-analysis landscape. In this paper, marking the 20th anniversary of The Cochrane Collaboration, we reflect on the history of the Statistical Methods Group, beginning in 1993 with the identification of aspects of statistical synthesis for which consensus was lacking about the best approach. We highlight some landmark methodological developments that Statistical Methods Group members have contributed to in the field of meta-analysis. We discuss how the Group implements and disseminates statistical methods within The Cochrane Collaboration. Finally, we consider the importance of robust statistical methodology for Cochrane systematic reviews, note research gaps, and reflect on the challenges that the Statistical Methods Group faces in its future direction. PMID:24280020

A Neuroconstructivist Model of Past Tense Development and Processing

ERIC Educational Resources Information Center

Westermann, Gert; Ruh, Nicolas

2012-01-01

We present a neural network model of learning and processing the English past tense that is based on the notion that experience-dependent cortical development is a core aspect of cognitive development. During learning the model adds and removes units and connections to develop a task-specific final architecture. The model provides an integrated…

Development of speech prostheses: current status and recent advances

PubMed Central

Brumberg, Jonathan S; Guenther, Frank H

2010-01-01

Brain–computer interfaces (BCIs) have been developed over the past decade to restore communication to persons with severe paralysis. In the most severe cases of paralysis, known as locked-in syndrome, patients retain cognition and sensation, but are capable of only slight voluntary eye movements. For these patients, no standard communication method is available, although some can use BCIs to communicate by selecting letters or words on a computer. Recent research has sought to improve on existing techniques by using BCIs to create a direct prediction of speech utterances rather than to simply control a spelling device. Such methods are the first steps towards speech prostheses as they are intended to entirely replace the vocal apparatus of paralyzed users. This article outlines many well known methods for restoration of communication by BCI and illustrates the difference between spelling devices and direct speech prediction or speech prosthesis. PMID:20822389

Numerical techniques for the solution of the compressible Navier-Stokes equations and implementation of turbulence models. [separated turbulent boundary layer flow problems

NASA Technical Reports Server (NTRS)

Baldwin, B. S.; Maccormack, R. W.; Deiwert, G. S.

1975-01-01

The time-splitting explicit numerical method of MacCormack is applied to separated turbulent boundary layer flow problems. Modifications of this basic method are developed to counter difficulties associated with complicated geometry and severe numerical resolution requirements of turbulence model equations. The accuracy of solutions is investigated by comparison with exact solutions for several simple cases. Procedures are developed for modifying the basic method to improve the accuracy. Numerical solutions of high-Reynolds-number separated flows over an airfoil and shock-separated flows over a flat plate are obtained. A simple mixing length model of turbulence is used for the transonic flow past an airfoil. A nonorthogonal mesh of arbitrary configuration facilitates the description of the flow field. For the simpler geometry associated with the flat plate, a rectangular mesh is used, and solutions are obtained based on a two-equation differential model of turbulence.

Google matrix analysis of directed networks

NASA Astrophysics Data System (ADS)

Ermann, Leonardo; Frahm, Klaus M.; Shepelyansky, Dima L.

2015-10-01

In the past decade modern societies have developed enormous communication and social networks. Their classification and information retrieval processing has become a formidable task for the society. Because of the rapid growth of the World Wide Web, and social and communication networks, new mathematical methods have been invented to characterize the properties of these networks in a more detailed and precise way. Various search engines extensively use such methods. It is highly important to develop new tools to classify and rank a massive amount of network information in a way that is adapted to internal network structures and characteristics. This review describes the Google matrix analysis of directed complex networks demonstrating its efficiency using various examples including the World Wide Web, Wikipedia, software architectures, world trade, social and citation networks, brain neural networks, DNA sequences, and Ulam networks. The analytical and numerical matrix methods used in this analysis originate from the fields of Markov chains, quantum chaos, and random matrix theory.

A Lie-Theoretic Perspective on O(n) Mass Matrix Inversion for Serial Manipulators and Polypeptide Chains

PubMed Central

Lee, Kiju; Wang, Yunfeng; Chirikjian, Gregory S.

2010-01-01

Over the past several decades a number of O(n) methods for forward and inverse dynamics computations have been developed in the multi-body dynamics and robotics literature. A method was developed in 1974 by Fixman for O(n) computation of the mass-matrix determinant for a serial polymer chain consisting of point masses. In other recent papers, we extended this method in order to compute the inverse of the mass matrix for serial chains consisting of point masses. In the present paper, we extend these ideas further and address the case of serial chains composed of rigid-bodies. This requires the use of relatively deep mathematics associated with the rotation group, SO(3), and the special Euclidean group, SE(3), and specifically, it requires that one differentiates functions of Lie-group-valued argument. PMID:20165563

Verification and Validation Studies for the LAVA CFD Solver

NASA Technical Reports Server (NTRS)

Moini-Yekta, Shayan; Barad, Michael F; Sozer, Emre; Brehm, Christoph; Housman, Jeffrey A.; Kiris, Cetin C.

2013-01-01

The verification and validation of the Launch Ascent and Vehicle Aerodynamics (LAVA) computational fluid dynamics (CFD) solver is presented. A modern strategy for verification and validation is described incorporating verification tests, validation benchmarks, continuous integration and version control methods for automated testing in a collaborative development environment. The purpose of the approach is to integrate the verification and validation process into the development of the solver and improve productivity. This paper uses the Method of Manufactured Solutions (MMS) for the verification of 2D Euler equations, 3D Navier-Stokes equations as well as turbulence models. A method for systematic refinement of unstructured grids is also presented. Verification using inviscid vortex propagation and flow over a flat plate is highlighted. Simulation results using laminar and turbulent flow past a NACA 0012 airfoil and ONERA M6 wing are validated against experimental and numerical data.

Computer-aided designing of immunosuppressive peptides based on IL-10 inducing potential

PubMed Central

Nagpal, Gandharva; Usmani, Salman Sadullah; Dhanda, Sandeep Kumar; Kaur, Harpreet; Singh, Sandeep; Sharma, Meenu; Raghava, Gajendra P. S.

2017-01-01

In the past, numerous methods have been developed to predict MHC class II binders or T-helper epitopes for designing the epitope-based vaccines against pathogens. In contrast, limited attempts have been made to develop methods for predicting T-helper epitopes/peptides that can induce a specific type of cytokine. This paper describes a method, developed for predicting interleukin-10 (IL-10) inducing peptides, a cytokine responsible for suppressing the immune system. All models were trained and tested on experimentally validated 394 IL-10 inducing and 848 non-inducing peptides. It was observed that certain types of residues and motifs are more frequent in IL-10 inducing peptides than in non-inducing peptides. Based on this analysis, we developed composition-based models using various machine-learning techniques. Random Forest-based model achieved the maximum Matthews’s Correlation Coefficient (MCC) value of 0.59 with an accuracy of 81.24% developed using dipeptide composition. In order to facilitate the community, we developed a web server “IL-10pred”, standalone packages and a mobile app for designing IL-10 inducing peptides (http://crdd.osdd.net/raghava/IL-10pred/). PMID:28211521

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ishii, H.; Fujino, H.; Bian, Z.

In this study, two types of marker-based tracking methods for Augmented Reality have been developed. One is a method which employs line-shaped markers and the other is a method which employs circular-shaped markers. These two methods recognize the markers by means of image processing and calculate the relative position and orientation between the markers and the camera in real time. The line-shaped markers are suitable to be pasted in the buildings such as NPPs where many pipes and tanks exist. The circular-shaped markers are suitable for the case that there are many obstacles and it is difficult to use line-shapedmore » markers because the obstacles hide the part of the line-shaped markers. Both methods can extend the maximum distance between the markers and the camera compared to the legacy marker-based tracking methods. (authors)« less

Molecular Modeling and Physicochemical Properties of Supramolecular Complexes of Limonene with α- and β-Cyclodextrins.

PubMed

Dos Passos Menezes, Paula; Dos Santos, Polliana Barbosa Pereira; Dória, Grace Anne Azevedo; de Sousa, Bruna Maria Hipólito; Serafini, Mairim Russo; Nunes, Paula Santos; Quintans-Júnior, Lucindo José; de Matos, Iara Lisboa; Alves, Péricles Barreto; Bezerra, Daniel Pereira; Mendonça Júnior, Francisco Jaime Bezerra; da Silva, Gabriel Francisco; de Aquino, Thiago Mendonça; de Souza Bento, Edson; Scotti, Marcus Tullius; Scotti, Luciana; de Souza Araujo, Adriano Antunes

2017-02-01

This study evaluated three different methods for the formation of an inclusion complex between alpha- and beta-cyclodextrin (α- and β-CD) and limonene (LIM) with the goal of improving the physicochemical properties of limonene. The study samples were prepared through physical mixing (PM), paste complexation (PC), and slurry complexation (SC) methods in the molar ratio of 1:1 (cyclodextrin:limonene). The complexes prepared were evaluated with thermogravimetry/derivate thermogravimetry, infrared spectroscopy, X-ray diffraction, complexation efficiency through gas chromatography/mass spectrometry analyses, molecular modeling, and nuclear magnetic resonance. The results showed that the physical mixing procedure did not produce complexation, but the paste and slurry methods produced inclusion complexes, which demonstrated interactions outside of the cavity of the CDs. However, the paste obtained with β-cyclodextrin did not demonstrate complexation in the gas chromatographic technique because, after extraction, most of the limonene was either surface-adsorbed by β-cyclodextrin or volatilized during the procedure. We conclude that paste complexation and slurry complexation are effective and economic methods to improve the physicochemical character of limonene and could have important applications in pharmacological activities in terms of an increase in solubility.

Flow Cytometry Techniques in Radiation Biology

DTIC Science & Technology

1988-06-01

Henidtopoietic stem cells SUMMARY Hematopoietic stem cells ( HSC ) are present in the marrow at a concentration of approximately 2-3 HSC per 1000 nucleated marrow...cells. In the past, only clonogenic assays requiring 8-13 days and ten irradiated recipient rodents were available for assaying HSC . Because of the...importance of HSC in the postirradiation syndrome, we have developed a new rapid method based on flow cytometry not only to assay but also to purify and

Learning for Semantic Parsing with Kernels under Various Forms of Supervision

DTIC Science & Technology

2007-08-01

natural language sentences to their formal executable meaning representations. This is a challenging problem and is critical for developing computing...sentences are semantically tractable. This indi- cates that Geoquery is more challenging domain for semantic parsing than ATIS. In the past, there have been a...Combining parsers. In Proceedings of the Conference on Em- pirical Methods in Natural Language Processing and Very Large Corpora (EMNLP/ VLC -99), pp. 187–194

Modeling Flue Pipes: Subsonic Flow, Lattice Boltzmann, and Parallel Distributed Computers.

DTIC Science & Technology

1995-01-01

Abstract The problem of simulating the hydrodynamics and the acoustic waves inside wind musical instruments such as the recorder, the organ, and the ute...inside wind musical instruments such as the recorder, the organ, and the ute is considered. The problem is attacked by developing suitable local...applications such as the simulation of uid dynamics inside wind musical instruments. In the past, he has also worked on numerical methods for ordinary di

Closing the loop on improvement: Packaging experience in the Software Engineering Laboratory

NASA Technical Reports Server (NTRS)

Waligora, Sharon R.; Landis, Linda C.; Doland, Jerry T.

1994-01-01

As part of its award-winning software process improvement program, the Software Engineering Laboratory (SEL) has developed an effective method for packaging organizational best practices based on real project experience into useful handbooks and training courses. This paper shares the SEL's experience over the past 12 years creating and updating software process handbooks and training courses. It provides cost models and guidelines for successful experience packaging derived from SEL experience.

Theoretical Models for Aircraft Availability: Classical Approach to Identification of Trends, Seasonality, and System Constraints in the Development of Realized Models

DTIC Science & Technology

2004-03-01

predicting future events ( Heizer and Render , 1999). Forecasting techniques fall into two major categories, qualitative and quantitative methods...Globemaster III.” Excerpt from website. www.globalsecurity.org/military /systems/ aircraft/c-17-history.htm. 2003. Heizer , Jay, and Barry Render ...of the past data used to make the forecast ( Heizer , et. al., 1999). Explanatory forecasting models assume that the variable being forecasted

Recent advances in diagnostic microbiology.

PubMed

Bravo, Lulette Tricia C; Procop, Gary W

2009-07-01

The past decade has seen a surge in the development of a variety of molecular diagnostics designed to rapidly identify or characterize medically important microorganisms. We briefly review important advances in molecular microbiology, and then discuss specific assays that have been implemented in clinical microbiology laboratories throughout the country. We also discuss emerging methods and technologies that will soon be more widely used for the prompt and accurate detection of the agents of infectious diseases.

Computational Chemistry in the Pharmaceutical Industry: From Childhood to Adolescence.

PubMed

Hillisch, Alexander; Heinrich, Nikolaus; Wild, Hanno

2015-12-01

Computational chemistry within the pharmaceutical industry has grown into a field that proactively contributes to many aspects of drug design, including target selection and lead identification and optimization. While methodological advancements have been key to this development, organizational developments have been crucial to our success as well. In particular, the interaction between computational and medicinal chemistry and the integration of computational chemistry into the entire drug discovery process have been invaluable. Over the past ten years we have shaped and developed a highly efficient computational chemistry group for small-molecule drug discovery at Bayer HealthCare that has significantly impacted the clinical development pipeline. In this article we describe the setup and tasks of the computational group and discuss external collaborations. We explain what we have found to be the most valuable and productive methods and discuss future directions for computational chemistry method development. We share this information with the hope of igniting interesting discussions around this topic. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Directed evolution: tailoring biocatalysts for industrial applications.

PubMed

Kumar, Ashwani; Singh, Suren

2013-12-01

Current challenges and promises of white biotechnology encourage protein engineers to use a directed evolution approach to generate novel and useful biocatalysts for various sets of applications. Different methods of enzyme engineering have been used in the past in an attempt to produce enzymes with improved functions and properties. Recent advancement in the field of random mutagenesis, screening, selection and computational design increased the versatility and the rapid development of enzymes under strong selection pressure with directed evolution experiments. Techniques of directed evolution improve enzymes fitness without understanding them in great detail and clearly demonstrate its future role in adapting enzymes for use in industry. Despite significant advances to date regarding biocatalyst improvement, there still remains a need to improve mutagenesis strategies and development of easy screening and selection tools without significant human intervention. This review covers fundamental and major development of directed evolution techniques, and highlights the advances in mutagenesis, screening and selection methods with examples of enzymes developed by using these approaches. Several commonly used methods for creating molecular diversity with their advantages and disadvantages including some recently used strategies are also discussed.

Waterjet processes for coating removal

NASA Technical Reports Server (NTRS)

Burgess, Fletcher; Cosby, Steve; Hoppe, David

1995-01-01

USBI and NASA have been testing and investigating the use of high pressure water for coating removal for approximately the past 12 years at the Automated TPS (Thermal Protection System - ablative materials used for thermal protection during ascent and descent of the solid rocket boosters) Removal Facility located in the Productivity Enhancement Complex at Marshall Space Flight Center. Originally the task was to develop and automate the removal process and transfer the technology to a production facility at Kennedy Space Center. Since that time more and more applications and support roles for the waterjet technology have been realized. The facility has become a vital part of development activities ongoing at MSFC. It supports the development of environmentally compliant insulations, sealants, and coatings. It also supports bonding programs, test motors, and pressure vessels. The most recent role of the cell is supporting Thiokol Corporation's solid rocket motor program in the development of waterjet degreasing and paint stripping methods. Currently vapor degreasing methods use 500,000 lbs. of ozone depleting chemicals per year. This paper describes the major cell equipment, test methods practiced, and coatings that have been removed.

A Preliminary Analysis of Procedures to Teach Children with Autism to Report Past Behavior

ERIC Educational Resources Information Center

Shillingsburg, M. Alice; Cariveau, Tom; Talmadge, Bethany; Frampton, Sarah

2017-01-01

Deficits in reporting past behavior may have implications for a child's social development and safety. Behavioral interpretations of memory and research on do/say correspondence provide valuable strategies to teach reporting past behavior when deficits are observed. The current study examined procedures to teach accurate reporting of past behavior…

A method for the determination of acrylamide in a broad variety of processed foods by GC-MS using xanthydrol derivatization.

PubMed

Yamazaki, Kumiko; Isagawa, Satoshi; Kibune, Nobuyuki; Urushiyama, Tetsuo

2012-01-01

A novel GC-MS method was developed for the determination of acrylamide, which is applicable to a variety of processed foods, including potato snacks, corn snacks, biscuits, instant noodles, coffee, soy sauces and miso (fermented soy bean paste). The method involves the derivatization of acrylamide with xanthydrol instead of a bromine compound. Isotopically labelled acrylamide (d₃-acrylamide) was used as the internal standard. The aqueous extract from samples was purified using Sep-Pak™ C₁₈ and Sep-Pak™ AC-2 columns. For amino acid-rich samples, such as miso or soy sauce, an Extrelut™ column was used for purification or extraction. After reaction with xanthydrol, the resultant N-xanthyl acrylamide was determined by GC-MS. The method was validated for various food matrices and showed good linearity, precision and trueness. The limit of detection and limit of quantification ranged 0.5-5 and 5-20 µg kg⁻¹), respectively. The developed method was applied as an exploratory survey of acrylamide in Japanese foods and the method was shown to be applicable for all samples tested.

Uterine electromyography and light-induced fluorescence in the management of term and preterm labor.

PubMed

Garfield, R E; Maul, H; Maner, W; Fittkow, C; Olson, G; Shi, L; Saade, G R

2002-01-01

Understanding the physiology of the uterus and cervix during term and preterm parturition is crucial for developing methods to control their function and is essential to solving clinical problems related to labor. To date, only crude, inaccurate, and subjective methods are used to assess changes in uterine and cervical function in pregnancy. In the past several years, we have developed noninvasive methods to quantitatively evaluate the uterus and cervix based on recording of uterine electrical signals from the abdominal surface (uterine electromyography) and measurement of light-induced fluorescence (LIF) of cervical collagen (Collascope), respectively. Both methods are rapid and allow immediate assessment of uterine contractility and cervical ripening. Studies in animals and humans indicated that uterine and cervical performance can be monitored successfully during pregnancy using those approaches and that these techniques can be used during labor to better define management in a variety of conditions associated with labor. The potential benefits of the proposed instrumentation and methods include reducing the rate of preterm delivery, improving maternal and perinatal outcome, monitoring treatment, decreasing cesarean rate and providing research methods to understand uterine and cervical function.

Estimation and Application of Ecological Memory Functions in Time and Space

NASA Astrophysics Data System (ADS)

Itter, M.; Finley, A. O.; Dawson, A.

2017-12-01

A common goal in quantitative ecology is the estimation or prediction of ecological processes as a function of explanatory variables (or covariates). Frequently, the ecological process of interest and associated covariates vary in time, space, or both. Theory indicates many ecological processes exhibit memory to local, past conditions. Despite such theoretical understanding, few methods exist to integrate observations from the recent past or within a local neighborhood as drivers of these processes. We build upon recent methodological advances in ecology and spatial statistics to develop a Bayesian hierarchical framework to estimate so-called ecological memory functions; that is, weight-generating functions that specify the relative importance of local, past covariate observations to ecological processes. Memory functions are estimated using a set of basis functions in time and/or space, allowing for flexible ecological memory based on a reduced set of parameters. Ecological memory functions are entirely data driven under the Bayesian hierarchical framework—no a priori assumptions are made regarding functional forms. Memory function uncertainty follows directly from posterior distributions for model parameters allowing for tractable propagation of error to predictions of ecological processes. We apply the model framework to simulated spatio-temporal datasets generated using memory functions of varying complexity. The framework is also applied to estimate the ecological memory of annual boreal forest growth to local, past water availability. Consistent with ecological understanding of boreal forest growth dynamics, memory to past water availability peaks in the year previous to growth and slowly decays to zero in five to eight years. The Bayesian hierarchical framework has applicability to a broad range of ecosystems and processes allowing for increased understanding of ecosystem responses to local and past conditions and improved prediction of ecological processes.

Astronomical technology - the past and the future. Karl Schwarzschild Award Lecture 2015

NASA Astrophysics Data System (ADS)

Appenzeller, I.

2016-07-01

The past fifty years have been an epoch of impressive progress in the field of astronomical technology. Practically all the technical tools, which we use today, have been developed during that time span. While the first half of this period has been dominated by advances in the detector technologies, during the past two decades innovative telescope concepts have been developed for practically all wavelength ranges where astronomical observations are possible. Further important advances can be expected in the next few decades. Based on the experience of the past, some of the main sources of technological progress can be identified.

Application of molluscan analyses to the reconstruction of past environmental conditions in estuaries: Chapter 15

USGS Publications Warehouse

Wingard, G. Lynn; Surge, Donna

2017-01-01

Molluscs possess a number of attributes that make them an excellent source of past environmental conditions in estuaries: they are common in estuarine environments; they typically have hard shells and are usually well preserved in sediments; they are relatively easy to detect in the environment; they have limited mobility as adults; they grow by incremental addition of layers to their shells; and they are found in all the major environments surrounding estuaries—terrestrial, freshwater, brackish, and marine waters. Analysis of molluscan assemblages can contribute information about past changes in sea level, climate, land use patterns, anthropogenic alterations, salinity, and other parameters of the benthic habitat and water chemistry within the estuary. High-resolution (from less than a day to annual) records of changes in environmental parameters can be obtained by analyzing the incremental growth layers in mollusc shells (sclerochronology). The shell layers retain information on changes in water temperature, salinity, seasonality, climate, river discharge, productivity, pollution and human activity. Isotopic analyses of mollusc shell growth layers can be problematic in estuaries where water temperatures and isotopic ratios can vary simultaneously; however, methods are being developed to overcome these problems. In addition to sclerochronology, molluscs are important to Holocene and Pleistocene estuarine palaeoenvironmental studies because of their use in the development of age models through radiocarbon dating, amino acid racemization, uranium-thorium series dating, and electron spin resonance (ESR) dating.

Elementary teachers past experiences: A narrative study of the past personal and professional experiences of elementary teachers who use science to teach math and reading

NASA Astrophysics Data System (ADS)

Acre, Andrea M.

This qualitative study investigated the experiences of four elementary teachers who have elected to use science to teach math and reading/language arts in an attempt to identify what motivates them to do so. Identifying what experiences have motivated these teachers to go against the gain and teach elementary science in this current era of high-stakes tests is of the upmost importance given that science is being eliminated from the elementary curriculum and it is during the elementary years that students' nurture and develop their interest in science. Additionally, the United States is failing to produce enough college graduates in STEM areas to fill the thousands of STEM jobs each year. Through a review of the literature, the past trends and current trends of elementary science education were explored as well as teacher training. Furthermore, the literature reviewed inquiry teaching which is considered to be the most effective teaching method when teaching science at any level. Using John Dewey's Interest and Effort Relationship Theory and the Self-Determination Motivation Theory to guide this study, there were five prominent themes which emerged from the reconstructed stories of the four teachers: positive experiences with science, neutral/negative experiences with science, seeks meaningful professional development, influence and support from others, and regret/wants to do more.

Review and Future Research Directions about Major Monitoring Method of Soil Erosion

NASA Astrophysics Data System (ADS)

LI, Yue; Bai, Xiaoyong; Tian, Yichao; Luo, Guangjie

2017-05-01

Soil erosion is a highly serious ecological problem that occurs worldwide. Hence,scientific methods for accurate monitoring are needed to obtain soil erosion data. At present,numerous methods on soil erosion monitoring are being used internationally. In this paper, wepresent a systematic classification of these methods based on the date of establishment andtype of approach. This classification comprises five categories: runoff plot method, erosion pinmethod, radionuclide tracer method, model estimation, and 3S technology combined method.The backgrounds of their establishment are briefly introduced, the history of their developmentis reviewed, and the conditions for their application are enumerated. Their respectiveadvantages and disadvantages are compared and analysed, and future prospects regarding theirdevelopment are discussed. We conclude that the methods of soil erosion monitoring in the past 100 years of their development constantly considered the needs of the time. According to the progress of soil erosion monitoring technology throughout its history, we predict that the future trend in this field would move toward the development of quantitative, precise, and composite methods. This report serves as a valuable reference for scientific and technological workers globally, especially those engaged in soil erosion research.

Recent advances in wavelet technology

NASA Technical Reports Server (NTRS)

Wells, R. O., Jr.

1994-01-01

Wavelet research has been developing rapidly over the past five years, and in particular in the academic world there has been significant activity at numerous universities. In the industrial world, there has been developments at Aware, Inc., Lockheed, Martin-Marietta, TRW, Kodak, Exxon, and many others. The government agencies supporting wavelet research and development include ARPA, ONR, AFOSR, NASA, and many other agencies. The recent literature in the past five years includes a recent book which is an index of citations in the past decade on this subject, and it contains over 1,000 references and abstracts.

Rapid, accurate, and direct determination of total lycopene content in tomato paste

NASA Astrophysics Data System (ADS)

Bicanic, D.; Anese, M.; Luterotti, S.; Dadarlat, D.; Gibkes, J.; Lubbers, M.

2003-01-01

Lycopene that imparts red color to the tomato fruit is the most potent antioxidant among carotenes, an important nutrient and also used as a color ingredient in many food formulations. Since cooked and processed foods derived from tomatoes were shown to provide optimal lycopene boost, products such as paste, puree, juice, etc. are nowadays gaining popularity as dietary sources. The analysis of lycopene in tomato paste (partially dehydrated product prepared by vacuum concentrating tomato juice) is carried out using either high pressure liquid chromatography (HPLC), spectrophotometry, or by evaluating the color. The instability of lycopene during processes of extraction, etc., handling, and disposal of organic solvents makes the preparation of a sample for the analysis a delicate task. Despite a recognized need for accurate and rapid assessment of lycopene in tomato products no such method is available at present. The study described here focuses on a direct determination of a total lycopene content in different tomato pastes by means of the laser optothermal window (LOW) method at 502 nm. The concentration of lycopene in tomato paste ranged between 25 and 150 mg per 100 g product; the results are in excellent agreement with those obtained by spectrophotometry. The time needed to complete LOW analysis is very short, so that decomposition of pigment and the formation of artifacts are minimized. Preliminary results indicate a good degree of reproducibility making the LOW method suitable for routine assays of lycopene content in tomato paste.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rodriguez, Jennifer N.; Hwang, Wonjun; Horn, John

We report that the rupture of an intracranial aneurysm, which can result in severe mental disabilities or death, affects approximately 30,000 people in the United States annually. The traditional surgical method of treating these arterial malformations involves a full craniotomy procedure, wherein a clip is placed around the aneurysm neck. In recent decades, research and device development have focused on new endovascular treatment methods to occlude the aneurysm void space. These methods, some of which are currently in clinical use, utilize metal, polymeric, or hybrid devices delivered via catheter to the aneurysm site. In this review, we present several suchmore » devices, including those that have been approved for clinical use, and some that are currently in development. We present several design requirements for a successful aneurysm filling device and discuss the success or failure of current and past technologies. Lastly, we also present novel polymeric based aneurysm filling methods that are currently being tested in animal models that could result in superior healing.« less

Design and biocompatibility of endovascular aneurysm filling devices

DOE PAGES

Rodriguez, Jennifer N.; Hwang, Wonjun; Horn, John; ...

2014-08-04

We report that the rupture of an intracranial aneurysm, which can result in severe mental disabilities or death, affects approximately 30,000 people in the United States annually. The traditional surgical method of treating these arterial malformations involves a full craniotomy procedure, wherein a clip is placed around the aneurysm neck. In recent decades, research and device development have focused on new endovascular treatment methods to occlude the aneurysm void space. These methods, some of which are currently in clinical use, utilize metal, polymeric, or hybrid devices delivered via catheter to the aneurysm site. In this review, we present several suchmore » devices, including those that have been approved for clinical use, and some that are currently in development. We present several design requirements for a successful aneurysm filling device and discuss the success or failure of current and past technologies. Lastly, we also present novel polymeric based aneurysm filling methods that are currently being tested in animal models that could result in superior healing.« less

Design and biocompatibility of endovascular aneurysm filling devices

PubMed Central

Rodriguez, Jennifer N.; Hwang, Wonjun; Horn, John; Landsman, Todd L.; Boyle, Anthony; Wierzbicki, Mark A.; Hasan, Sayyeda M.; Follmer, Douglas; Bryant, Jesse; Small, Ward; Maitland, Duncan J.

2014-01-01

The rupture of an intracranial aneurysm, which can result in severe mental disabilities or death, affects approximately 30,000 people in the United States annually. The traditional surgical method of treating these arterial malformations involves a full craniotomy procedure, wherein a clip is placed around the aneurysm neck. In recent decades, research and device development have focused on new endovascular treatment methods to occlude the aneurysm void space. These methods, some of which are currently in clinical use, utilize metal, polymeric, or hybrid devices delivered via catheter to the aneurysm site. In this review, we present several such devices, including those that have been approved for clinical use, and some that are currently in development. We present several design requirements for a successful aneurysm filling device and discuss the success or failure of current and past technologies. We also present novel polymeric based aneurysm filling methods that are currently being tested in animal models that could result in superior healing. PMID:25044644

On the decomposition of life expectancy and limits to life.

PubMed

Mayhew, Les; Smith, David

2015-01-01

Life expectancy is a measure of how long people are expected to live and is widely used as a measure of human development. Variations in the measure reflect not only the process of ageing but also the impacts of such events as epidemics, wars, and economic recessions. Since 1950, the influence of these events in the most developed countries has waned and life expectancy continues to lengthen unabated. As a result, it has become more difficult to forecast long-run trends accurately, or identify possible upper limits. We present new methods for comparing past improvements in life expectancy and also future prospects, using data from five developed, low-mortality countries. We consider life expectancy in 10-year age intervals rather than over the remaining lifetime, and show how natural limits to life expectancy can be used to extrapolate trends. We discuss the implications and compare our approach with other commonly used methods.

Practical Issues in Implementing Software Reliability Measurement

NASA Technical Reports Server (NTRS)

Nikora, Allen P.; Schneidewind, Norman F.; Everett, William W.; Munson, John C.; Vouk, Mladen A.; Musa, John D.

1999-01-01

Many ways of estimating software systems' reliability, or reliability-related quantities, have been developed over the past several years. Of particular interest are methods that can be used to estimate a software system's fault content prior to test, or to discriminate between components that are fault-prone and those that are not. The results of these methods can be used to: 1) More accurately focus scarce fault identification resources on those portions of a software system most in need of it. 2) Estimate and forecast the risk of exposure to residual faults in a software system during operation, and develop risk and safety criteria to guide the release of a software system to fielded use. 3) Estimate the efficiency of test suites in detecting residual faults. 4) Estimate the stability of the software maintenance process.

Boron neutron capture therapy (BNCT) in Finland: technological and physical prospects after 20 years of experiences.

PubMed

Savolainen, Sauli; Kortesniemi, Mika; Timonen, Marjut; Reijonen, Vappu; Kuusela, Linda; Uusi-Simola, Jouni; Salli, Eero; Koivunoro, Hanna; Seppälä, Tiina; Lönnroth, Nadja; Välimäki, Petteri; Hyvönen, Heini; Kotiluoto, Petri; Serén, Tom; Kuronen, Antti; Heikkinen, Sami; Kosunen, Antti; Auterinen, Iiro

2013-05-01

Boron Neutron Capture Therapy (BNCT) is a binary radiotherapy method developed to treat patients with certain malignant tumours. To date, over 300 treatments have been carried out at the Finnish BNCT facility in various on-going and past clinical trials. In this technical review, we discuss our research work in the field of medical physics to form the groundwork for the Finnish BNCT patient treatments, as well as the possibilities to further develop and optimize the method in the future. Accordingly, the following aspects are described: neutron sources, beam dosimetry, treatment planning, boron imaging and determination, and finally the possibilities to detect the efficacy and effects of BNCT on patients. Copyright © 2012 Associazione Italiana di Fisica Medica. Published by Elsevier Ltd. All rights reserved.

Economic Measures of Pollination Services: Shortcomings and Future Directions.

PubMed

Breeze, Tom D; Gallai, Nicola; Garibaldi, Lucas A; Li, Xui S

2016-12-01

Over the past 20 years, there has been growing interest in the possible economic impacts of pollination service loss and management. Although the literature area has expanded rapidly, there remains ongoing debate about the usefulness of such exercises. Reviewing the methods and findings of the current body of literature, this review highlights three major trends: (i) estimated benefits are heterogeneous, even when using the same method, due to several often-neglected factors. (ii) The current body of literature focuses heavily on the developed world, neglecting the effects on developing countries. (iii) Very few studies are suitable for informing management and policy. The review highlights the need for fully interdisciplinary work that embeds stakeholders and economic impacts into primary ecological research. Copyright © 2016 Elsevier Ltd. All rights reserved.

Thermographic Phosphors for High Temperature Measurements: Principles, Current State of the Art and Recent Applications

PubMed Central

Khalid, Ashiq Hussain; Kontis, Konstantinos

2008-01-01

This paper reviews the state of phosphor thermometry, focusing on developments in the past 15 years. The fundamental principles and theory are presented, and the various spectral and temporal modes, including the lifetime decay, rise time and intensity ratio, are discussed. The entire phosphor measurement system, including relative advantages to conventional methods, choice of phosphors, bonding techniques, excitation sources and emission detection, is reviewed. Special attention is given to issues that may arise at high temperatures. A number of recent developments and applications are surveyed, with examples including: measurements in engines, hypersonic wind tunnel experiments, pyrolysis studies and droplet/spray/gas temperature determination. They show the technique is flexible and successful in measuring temperatures where conventional methods may prove to be unsuitable. PMID:27873836

Advances in spatial epidemiology and geographic information systems.

PubMed

Kirby, Russell S; Delmelle, Eric; Eberth, Jan M

2017-01-01

The field of spatial epidemiology has evolved rapidly in the past 2 decades. This study serves as a brief introduction to spatial epidemiology and the use of geographic information systems in applied research in epidemiology. We highlight technical developments and highlight opportunities to apply spatial analytic methods in epidemiologic research, focusing on methodologies involving geocoding, distance estimation, residential mobility, record linkage and data integration, spatial and spatio-temporal clustering, small area estimation, and Bayesian applications to disease mapping. The articles included in this issue incorporate many of these methods into their study designs and analytical frameworks. It is our hope that these studies will spur further development and utilization of spatial analysis and geographic information systems in epidemiologic research. Copyright © 2016 Elsevier Inc. All rights reserved.

On ways to overcome the magical capacity limit of working memory.

PubMed

Turi, Zsolt; Alekseichuk, Ivan; Paulus, Walter

2018-04-01

The ability to simultaneously process and maintain multiple pieces of information is limited. Over the past 50 years, observational methods have provided a large amount of insight regarding the neural mechanisms that underpin the mental capacity that we refer to as "working memory." More than 20 years ago, a neural coding scheme was proposed for working memory. As a result of technological developments, we can now not only observe but can also influence brain rhythms in humans. Building on these novel developments, we have begun to externally control brain oscillations in order to extend the limits of working memory.

[Advances of Molecular Diagnostic Techniques Application in Clinical Diagnosis.

PubMed

Ying, Bin-Wu

2016-11-01

Over the past 20 years,clinical molecular diagnostic technology has made rapid development,and became the most promising field in clinical laboratory medicine.In particular,with the development of genomics,clinical molecular diagnostic methods will reveal the nature of clinical diseases in a deeper level,thus guiding the clinical diagnosis and treatments.Many molecular diagnostic projects have been routinely applied in clinical works.This paper reviews the advances on application of clinical diagnostic techniques in infectious disease,tumor and genetic disorders,including nucleic acid amplification,biochip,next-generation sequencing,and automation molecular system,and so on.

Using three-dimensional imaging to assess treatment outcomes in orthodontics: a progress report from the University of the Pacific.

PubMed

Baumrind, S; Carlson, S; Beers, A; Curry, S; Norris, K; Boyd, R L

2003-01-01

Past research in integrated three-dimensional (3D) craniofacial mapping at the Craniofacial Research Instrumentation Laboratory (CRIL) of the University of the Pacific is summarized in narrative form. The advantages and limitations of recent commercial developments in the application of cone beam geometry volumetric X-ray scanners in dentistry and surface digital mapping of study casts are discussed. The rationale for methods currently in development at CRIL for merging longitudinal information from existing 3D study casts and two-dimensional lateral X-ray cephalograms in studies of orthodontic treatment outcome is presented.

On the characteristics of optimal transfers

NASA Astrophysics Data System (ADS)

Iorfida, Elisabetta

In the past 50 years the scientists have been developing and analysing methods and new algorithms that optimise an interplanetary trajectory according to one or more objectives. Within this field, in 1963 Lawden derived, from Pontryagin's minimum principle, the so-called `primer vector theory'. The main goal of this thesis is to develop a theoretical understanding of Lawden's theory, getting an insight into the optimality of a trajectory when mid-course corrections need to be applied. The novelty of the research is represented by a different approach to the primer vector theory, which simplifies the structure of the problem.

Study to develop improved methods to detect leakage in fluid systems, phase 2

NASA Technical Reports Server (NTRS)

Janus, J. C.; Cimerman, I.

1971-01-01

An ultrasonic contact sensor engineering prototype leak detection system was developed and its capabilities under cryogenic operations demonstrated. The results from tests indicate that the transducer performed well on liquid hydrogen plumbing, that flow and valve actuation could be monitored, and that the phase change from gaseous to liquid hydrogen could be detected by the externally mounted transducers. Tests also demonstrate the ability of the system to detect internal leaks past valve seats and to function as a flow meter. Such a system demonstrates that it is not necessary to break into welded systems to locate internal leaks.

Computational prediction of chemical reactions: current status and outlook.

PubMed

Engkvist, Ola; Norrby, Per-Ola; Selmi, Nidhal; Lam, Yu-Hong; Peng, Zhengwei; Sherer, Edward C; Amberg, Willi; Erhard, Thomas; Smyth, Lynette A

2018-06-01

Over the past few decades, various computational methods have become increasingly important for discovering and developing novel drugs. Computational prediction of chemical reactions is a key part of an efficient drug discovery process. In this review, we discuss important parts of this field, with a focus on utilizing reaction data to build predictive models, the existing programs for synthesis prediction, and usage of quantum mechanics and molecular mechanics (QM/MM) to explore chemical reactions. We also outline potential future developments with an emphasis on pre-competitive collaboration opportunities. Copyright © 2018 Elsevier Ltd. All rights reserved.

The State-of-the-Art of Materials Technology Used for Fossil and Nuclear Power Plants in China

NASA Astrophysics Data System (ADS)

Weng, Yuqing

Combined with the development of energy in China during the past 30 years, this paper clarified that high steam parameters ultra-supercritical (USC) coal-fired power plants and 1000MW nuclear power plants are the most important method to optimize energy structure and achieve national goals of energy saving and CO2 emission in China. Additionally, requirement of materials technology in high steam parameters USC coal-fired power plants and 1000MW nuclear power plants, current research and major development of relevant materials technology in China were briefly described in this paper.

The Role of Frequency in Learning Morphophonological Alternations: Implications for Children With Specific Language Impairment

PubMed Central

Demuth, Katherine; Petocz, Peter

2017-01-01

Purpose The aim of this article was to explore how the type of allomorph (e.g., past tense buzz[d] vs. nod[əd]) influences the ability to perceive and produce grammatical morphemes in children with typical development and with specific language impairment (SLI). Method The participants were monolingual Australian English–speaking children. The SLI group included 13 participants (mean age = 5;7 [years;months]); the control group included 19 children with typical development (mean age = 5;4). Both groups performed a grammaticality judgment and elicited production task with the same set of nonce verbs in third-person singular and past tense forms. Results Five-year-old children are still learning to generalize morphophonological patterns to novel verbs, and syllabic /əz/ and /əd/ allomorphs are significantly more challenging to produce, particularly for the SLI group. The greater phonetic content of these syllabic forms did not enhance perception. Conclusions Acquisition of morphophonological patterns involving low-frequency allomorphs is still underway in 5-year-old children with typical development, and it is even more protracted in SLI populations, despite these patterns being highly predictable. Children with SLI will therefore benefit from targeted intervention with low-frequency allomorphs. PMID:28510615

Biomedical and social contributions to sustainability.

PubMed

Wilmut, Ian; Wongtawan, Tuempong; Quigley, Mindy; Sullivan, Gareth

2011-05-13

Over the past two or three centuries, biomedical advances have provided methods to prevent and treat infectious diseases. These changes have greatly reduced human suffering and enhanced sustainability by allowing people to live longer and healthier lives. The challenge for the coming centuries will be to ensure that these longer, healthier lives are also more productive lives. We must build on the gains of the past by translating new discoveries in regenerative medicine into therapies for degenerative and genetic diseases. Stem cells may be used to identify drugs that prevent the development of symptoms or to replace cells that have either died or lost their physiological function. In the case of genetic diseases, it may be possible to correct the genetic error. While most conditions that might be treated in these ways are common to all communities, some are more prevalent in specific races. Provision of these and other benefits depends not only on attainment of the research objectives, but also upon our ability to make treatment opportunities available throughout both developed and developing communities. The long history of researching and treating infectious diseases shows that it may take many decades to reap the full benefit of the new biological understanding. © 2011 Royal Society

Regenerative endodontics as a tissue engineering approach: past, current and future.

PubMed

Malhotra, Neeraj; Mala, Kundabala

2012-12-01

With the reported startling statistics of high incidence of tooth decay and tooth loss, the current interest is focused on the development of alternate dental tissue replacement therapies. This has led to the application of dental tissue engineering as a clinically relevant method for the regeneration of dental tissues and generation of bioengineered whole tooth. Although, tissue engineering approach requires the three main key elements of stem cells, scaffold and morphogens, a conductive environment (fourth element) is equally important for successful engineering of any tissue and/or organ. The applications of this science has evolved continuously in dentistry, beginning from the application of Ca(OH)(2) in vital pulp therapy to the development of a fully functional bioengineered tooth (mice). Thus, with advances in basic research, recent reports and studies have shown successful application of tissue engineering in the field of dentistry. However, certain practical obstacles are yet to be overcome before dental tissue regeneration can be applied as evidence-based approach in clinics. The article highlights on the past achievements, current developments and future prospects of tissue engineering and regenerative therapy in the field of endodontics and bioengineered teeth (bioteeth). © 2012 The Authors. Australian Endodontic Journal © 2012 Australian Society of Endodontology.

Hydrodynamic Simulations of Protoplanetary Disks with GIZMO

NASA Astrophysics Data System (ADS)

Rice, Malena; Laughlin, Greg

2018-01-01

Over the past several decades, the field of computational fluid dynamics has rapidly advanced as the range of available numerical algorithms and computationally feasible physical problems has expanded. The development of modern numerical solvers has provided a compelling opportunity to reconsider previously obtained results in search for yet undiscovered effects that may be revealed through longer integration times and more precise numerical approaches. In this study, we compare the results of past hydrodynamic disk simulations with those obtained from modern analytical resources. We focus our study on the GIZMO code (Hopkins 2015), which uses meshless methods to solve the homogeneous Euler equations of hydrodynamics while eliminating problems arising as a result of advection between grid cells. By comparing modern simulations with prior results, we hope to provide an improved understanding of the impact of fluid mechanics upon the evolution of protoplanetary disks.

Cellular morphology of organic-inorganic hybrid foams based on alkali alumino-silicate matrix

NASA Astrophysics Data System (ADS)

Verdolotti, Letizia; Liguori, Barbara; Capasso, Ilaria; Caputo, Domenico; Lavorgna, Marino; Iannace, Salvatore

2014-05-01

Organic-inorganic hybrid foams based on an alkali alumino-silicate matrix were prepared by using different foaming methods. Initially, the synthesis of an inorganic matrix by using aluminosilicate particles, activated through a sodium silicate solution, was performed at room temperature. Subsequently the viscous paste was foamed by using three different methods. In the first method, gaseous hydrogen produced by the oxidization of Si powder in an alkaline media, was used as blowing agent to generate gas bubbles in the paste. In the second method, the porous structure was generated by mixing the paste with a "meringue" type of foam previously prepared by whipping, under vigorous stirring, a water solution containing vegetal proteins as surfactants. In the third method, a combination of these two methods was employed. The foamed systems were consolidated for 24 hours at 40°C and then characterized by FTIR, X-Ray diffraction, scanning electron microscopy (SEM) and compression tests. Low density foams (˜500 Kg/m3) with good cellular structure and mechanical properties were obtained by combining the "meringue" approach with the use of the chemical blowing agent based on Si.

A High-Resolution Record of Holocene Climate Variability from a Western Canadian Coastal Inlet

NASA Astrophysics Data System (ADS)

Dallimore, A.; Thomson, R. E.; Enkin, R. J.; Kulikov, E. A.; Bertram, M. A.; Wright, C. A.; Southon, J. R.; Barrie, J. V.; Baker, J.; Pienitz, R.; Calvert, S. E.; Chang, A. S.; Pedersen, T. F.

2004-12-01

Conditions within the Pacific Ocean have a major effect on the climate of northwestern North America. High resolution records of present and past northeast Pacific climate are revealed in our multi-disciplinary study of annually laminated marine sediments from anoxic coastal inlets of British Columbia. Past climate conditions for the entire Holocene are recorded in the sediment record contained in a 40 meter, annually laminated marine sediment core taken in Effingham Inlet, on the west coast of Vancouver Island, British Columbia, from the French ship the Marion Dufresne, as part of the international IMAGES program. By combining our eight year continuous instrument record of modern coastal ocean dynamics and climate with high-resolution analysis of depositional processes, we have been able to develop proxy measurements of past climatic and oceanographic changes on annual to millennial time scales. Results indicate that regional climate has oscillated on a variety of time scales throughout the Holocene. At times, climatic change has been dramatically rapid. We are also developing digital methods for statistical time-series analyses of physical sediment properties through the Holocene in order to obtain a more objective quantitative approach for detecting cyclicity in our data. Results of the time series analysis of lamination thickness reveals statistically significant spectral peaks of climate scale variability at established decadal to century time scales. These in turn may be related to solar cycles and quasi-cyclical ocean processes such as the Pacific Decadal Oscillation. However, the annually laminated time series are periodically interrupted by massive mud intervals which are related to bottom currents and at times paleo-seismic events, illustrating the need for a full understanding of modern oceanographic and sedimentation processes, so an accurate proxy record of past climate can be established.

Flexible Wing Base Micro Aerial Vehicles: Composite Materials for Micro Air Vehicles

NASA Technical Reports Server (NTRS)

Ifju, Peter G.; Ettinger, Scott; Jenkins, David; Martinez, Luis

2002-01-01

This paper will discuss the development of the University of Florida's Micro Air Vehicle concept. A series of flexible wing based aircraft that possess highly desirable flight characteristics were developed. Since computational methods to accurately model flight at the low Reynolds numbers associated with this scale are still under development, our effort has relied heavily on trial and error. Hence a time efficient method was developed to rapidly produce prototype designs. The airframe and wings are fabricated using a unique process that incorporates carbon fiber composite construction. Prototypes can be fabricated in around five man-hours, allowing many design revisions to be tested in a short period of time. The resulting aircraft are far more durable, yet lighter, than their conventional counterparts. This process allows for thorough testing of each design in order to determine what changes were required on the next prototype. The use of carbon fiber allows for wing flexibility without sacrificing durability. The construction methods developed for this project were the enabling technology that allowed us to implement our designs. The resulting aircraft were the winning entries in the International Micro Air Vehicle Competition for the past two years. Details of the construction method are provided in this paper along with a background on our flexible wing concept.

Use of space-filling curves to select sample locations in natural resource monitoring studies

Treesearch

Andrew Lister; Charles T. Scott

2009-01-01

The establishment of several large area monitoring networks over the past few decades has led to increased research into ways to spatially balance sample locations across the landscape. Many of these methods are well documented and have been used in the past with great success. In this paper, we present a method using geographic information systems (GIS) and fractals...

Examining the Relationship Between Past Orientation and US Suicide Rates: An Analysis Using Big Data-Driven Google Search Queries

PubMed Central

Lee, Donghyun; Lee, Hojun

2016-01-01

Background Internet search query data reflect the attitudes of the users, using which we can measure the past orientation to commit suicide. Examinations of past orientation often highlight certain predispositions of attitude, many of which can be suicide risk factors. Objective To investigate the relationship between past orientation and suicide rate by examining Google search queries. Methods We measured the past orientation using Google search query data by comparing the search volumes of the past year and those of the future year, across the 50 US states and the District of Columbia during the period from 2004 to 2012. We constructed a panel dataset with independent variables as control variables; we then undertook an analysis using multiple ordinary least squares regression and methods that leverage the Akaike information criterion and the Bayesian information criterion. Results It was found that past orientation had a positive relationship with the suicide rate (P≤.001) and that it improves the goodness-of-fit of the model regarding the suicide rate. Unemployment rate (P≤.001 in Models 3 and 4), Gini coefficient (P≤.001), and population growth rate (P≤.001) had a positive relationship with the suicide rate, whereas the gross state product (P≤.001) showed a negative relationship with the suicide rate. Conclusions We empirically identified the positive relationship between the suicide rate and past orientation, which was measured by big data-driven Google search query. PMID:26868917

Sources and methods to reconstruct past masting patterns in European oak species.

PubMed

Szabó, Péter

2012-01-01

The irregular occurrence of good seed years in forest trees is known in many parts of the world. Mast year frequency in the past few decades can be examined through field observational studies; however, masting patterns in the more distant past are equally important in gaining a better understanding of long-term forest ecology. Past masting patterns can be studied through the examination of historical written sources. These pose considerable challenges, because data in them were usually not recorded with the aim of providing information about masting. Several studies examined masting in the deeper past, however, authors hardly ever considered the methodological implications of using and combining various source types. This paper provides a critical overview of the types of archival written that are available for the reconstruction of past masting patterns for European oak species and proposes a method to unify and evaluate different types of data. Available sources cover approximately eight centuries and can be put into two basic categories: direct observations on the amount of acorns and references to sums of money received in exchange for access to acorns. Because archival sources are highly different in origin and quality, the optimal solution for creating databases for past masting data is a three-point scale: zero mast, moderate mast, good mast. When larger amounts of data are available in a unified three-point-scale database, they can be used to test hypotheses about past masting frequencies, the driving forces of masting or regional masting patterns.

CONTRACEPTION TECHNOLOGY: PAST, PRESENT AND FUTURE

PubMed Central

Sitruk-Ware, Regine; Nath, Anita; Mishell, Daniel R.

2012-01-01

Steady progress in contraception research has been achieved over the past 50 years. Hormonal and non-hormonal modern contraceptives have improved women’s lives by reducing different health conditions that contributed to considerable morbidity. However the contraceptives available today are not suitable to all users and the need to expand contraceptive choices still exists. Novel products such as new implants, contraceptive vaginal rings, transdermal patches and newer combinations of oral contraceptives have recently been introduced in family planning programs and hormonal contraception is widely used for spacing and limiting births. Concerns over the adverse effects of hormonal contraceptives have led to research and development of new combinations with improved metabolic profile. Recent developments include use of natural compounds such as estradiol (E2) and estradiol valerate (E2V) with the hope to decrease thrombotic risk, in combination with newer progestins derived from the progesterone structure or from spirolactone, in order to avoid the androgenic effects. Progesterone antagonists and progesterone receptor modulators are highly effective in blocking ovulation and preventing follicular rupture and are undergoing investigations in the form of oral pills and in semi long-acting delivery systems. Future developments also include the combination of a contraceptive with an antiretroviral agent for dual contraception and protection against sexually transmitted diseases, to be used before intercourse or on demand, as well as for continuous use in dual-protection rings. Alhough clinical trials of male contraception have reflected promising results, limited involvement of industry in that area of research has decreased the likelihood of having a male method available in the current decade. Development of non-hormonal methods are still at an early stage of research, with the identification of specific targets within the reproductive system in ovaries and testes, as well as interactions between spermatozoa and ova. It is hoped that the introduction of new methods with additional health benefits would help women and couples with unmet needs to obtain access to a wider range of contraceptives with improved acceptability. PMID:22995540

The development of catalytic nucleophilic additions of terminal alkynes in water.

PubMed

Li, Chao-Jun

2010-04-20

One of the major research endeavors in synthetic chemistry over the past two decades is the exploration of synthetic methods that work under ambient atmosphere with benign solvents, that maximize atom utilization, and that directly transform natural resources, such as renewable biomass, from their native states into useful chemical products, thus avoiding the need for protecting groups. The nucleophilic addition of terminal alkynes to various unsaturated electrophiles is a classical (textbook) reaction in organic chemistry, allowing the formation of a C-C bond while simultaneously introducing the alkyne functionality. A prerequisite of this classical reaction is the stoichiometric generation of highly reactive metal acetylides. Over the past decade, our laboratory and others have been exploring an alternative, the catalytic and direct nucleophilic addition of terminal alkynes to unsaturated electrophiles in water. We found that various terminal alkynes can react efficiently with a wide range of such electrophiles in water (or organic solvent) in the presence of simple and readily available catalysts, such as copper, silver, gold, iron, palladium, and others. In this Account, we describe the development of these synthetic methods, focusing primarily on results from our laboratory. Our studies include the following: (i) catalytic reaction of terminal alkynes with acid chloride, (ii) catalytic addition of terminal alkynes to aldehydes and ketones, (iii) catalytic addition of alkynes to C=N bonds, and (iv) catalytic conjugate additions. Most importantly, these reactions can tolerate various functional groups and, in many cases, perform better in water than in organic solvents, clearly defying classical reactivities predicated on the relative acidities of water, alcohols, and terminal alkynes. We further discuss multicomponent and enantioselective reactions that were developed. These methods provide an alternative to the traditional requirement of separate steps in classical alkyne reactions, including the pregeneration of metal acetylides with stoichiometric, highly basic reagents and the preprotection of sensitive functional groups. Accordingly, these techniques have greatly enhanced overall synthetic efficiencies and furthered our long-term objective of developing Grignard-type reactions in water.

Contraception technology: past, present and future.

PubMed

Sitruk-Ware, Regine; Nath, Anita; Mishell, Daniel R

2013-03-01

Steady progress in contraception research has been achieved over the past 50 years. Hormonal and nonhormonal modern contraceptives have improved women's lives by reducing different health conditions that contributed to considerable morbidity. However, the contraceptives available today are not suitable to all users, and the need to expand contraceptive choices still exists. Novel products such as new implants, contraceptive vaginal rings, transdermal patches and newer combinations of oral contraceptives have recently been introduced in family planning programs, and hormonal contraception is widely used for spacing and limiting births. Concerns over the adverse effects of hormonal contraceptives have led to research and development of new combinations with improved metabolic profile. Recent developments include use of natural compounds such as estradiol and estradiol valerate with the hope to decrease thrombotic risk, in combination with newer progestins derived from the progesterone structure or from spirolactone, in order to avoid the androgenic effects. Progesterone antagonists and progesterone receptor modulators are highly effective in blocking ovulation and preventing follicular rupture and are undergoing investigations in the form of oral pills and in semi-long-acting delivery systems. Future developments also include the combination of a contraceptive with an antiretroviral agent for dual contraception and protection against sexually transmitted diseases, to be used before intercourse or on demand, as well as for continuous use in dual-protection rings. Although clinical trials of male contraception have reflected promising results, limited involvement of industry in that area of research has decreased the likelihood of having a male method available in the current decade. Development of nonhormonal methods is still at an early stage of research, with the identification of specific targets within the reproductive system in ovaries and testes, as well as interactions between spermatozoa and ova. It is hoped that the introduction of new methods with additional health benefits would help women and couples with unmet needs to obtain access to a wider range of contraceptives with improved acceptability. Copyright © 2013 Elsevier Inc. All rights reserved.

Resistant starch: Variation among high amylose rice varieties and its relationship with apparent amylose content, pasting properties and cooking methods.

PubMed

Chen, Ming-Hsuan; Bergman, Christine J; McClung, Anna M; Everette, Jace D; Tabien, Rodante E

2017-11-01

Resistant starch (RS), which is not hydrolyzed in the small intestine, has proposed health benefits. We evaluated 40 high amylose rice varieties for RS content in cooked rice and a 1.9-fold difference was found. Some varieties had more than two-fold greater RS content than a US long-grain intermediate-amylose rice. The high amylose varieties were grouped into four classes according to paste viscosity and gelatinization temperature based on genetic variants of the Waxy and Starch Synthase IIa genes, respectively. RS content was not different between the four paste viscosity-gelatinization temperature classes. Multiple linear regression analysis showed that apparent amylose content and pasting temperature were strong predictors of RS within each class. Two cooking methods, fixed water-to-rice ratio/time and in excess-water/minimum-cook-time, were compared using six rice varieties that were extremes in RS in each of the genetic variant classes, no difference in RS content due to cooking method was observed. Published by Elsevier Ltd.

Development of a REBCO HTS magnet for Maglev - repeated bending tests of HTS pancake coils -

NASA Astrophysics Data System (ADS)

Sugino, Motohikoa; Mizuno, Katsutoshi; Tanaka, Minoru; Ogata, Masafumi

2018-01-01

In the past study, two manufacturing methods were developed that can manufacture pancake coils by using REBCO coated conductors. It was confirmed that the conductors have no electric degradation that caused by the manufacturing method. The durability evaluation tests of the pancake coils were conducted as the final evaluation of the coil manufacturing method in this study. The repeated bending deformation was applied to manufactured pancake coils in the tests. As the results of these tests, it was confirmed that the pancake coils that were manufactured by two methods had the durability for the repeated bending deformation and the coils maintained the appropriate mechanical performance and electric performance. We adopted the fusion bonding method as the coil manufacturing method of the HTS magnet Furthermore, using the prototype pancake coil that was manufactured by the fusion bonding method as a test sample, the repeated bending test under the exited condition was conducted. Thus it was confirmed that the coil manufactured by the fusion bonding method has no degradation of the electricity performance and the mechanical properties even if the repeated bending deformation was applied under the exited condition.

Nondestructive Evaluation of Aircraft and Spacecraft Wiring

NASA Technical Reports Server (NTRS)

White, John E.; Tucholski, Edward J.; Green, Robert E., Jr.

2004-01-01

Spacecraft, and especially aircraft, often fry well past their original design lives and, therefore, the need to develop nondestructive evaluation procedures for inspection of vital structures in these craft is extremely important. One of the more recent problems is the degradation of wiring and wiring insulation. The present paper describes several nondestructive characterization methods which afford the possibility to detect wiring and insulation degradation in-situ prior to major problems with the safety of aircraft and spacecraft.

International Harmonization of Food Safety Assessment of Pesticide Residues.

PubMed

Ambrus, Árpád

2016-01-13

This paper summarizes the development of principles and methods applied within the program of the FAO/WHO Codex Alimentarius during the past 50 years for the safety assessment of pesticide residues in food and feed and establishing maximum residue limits (MRLs) to promote free international trade and assure the safety of consumers. The role of major international organizations in this process, the FAO capacity building activities, and some problematic areas that require special attention are briefly described.

Functional brain imaging in neuropsychology over the past 25 years.

PubMed

Roalf, David R; Gur, Ruben C

2017-11-01

Outline effects of functional neuroimaging on neuropsychology over the past 25 years. Functional neuroimaging methods and studies will be described that provide a historical context, offer examples of the utility of neuroimaging in specific domains, and discuss the limitations and future directions of neuroimaging in neuropsychology. Tracking the history of publications on functional neuroimaging related to neuropsychology indicates early involvement of neuropsychologists in the development of these methodologies. Initial progress in neuropsychological application of functional neuroimaging has been hampered by costs and the exposure to ionizing radiation. With rapid evolution of functional methods-in particular functional MRI (fMRI)-neuroimaging has profoundly transformed our knowledge of the brain. Its current applications span the spectrum of normative development to clinical applications. The field is moving toward applying sophisticated statistical approaches that will help elucidate distinct neural activation networks associated with specific behavioral domains. The impact of functional neuroimaging on clinical neuropsychology is more circumscribed, but the prospects remain enticing. The theoretical insights and empirical findings of functional neuroimaging have been led by many neuropsychologists and have transformed the field of behavioral neuroscience. Thus far they have had limited effects on the clinical practices of neuropsychologists. Perhaps it is time to add training in functional neuroimaging to the clinical neuropsychologist's toolkit and from there to the clinic or bedside. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Validity and reproducibility of a food frequency questionnaire (FFQ) for dietary assessment in Malay adolescents in Malaysia.

PubMed

Nurul-Fadhilah, Abdullah; Teo, Pey Sze; Foo, Leng Huat

2012-01-01

Food frequency questionnaire (FFQ) must be tailored to the target populations because dietary habits vary within the populations due to differences in cultural and lifestyles practices. Limited information is available to assess the validity of FFQ used among Malaysian adolescents. To construct the validity and reproducibility of a newly developed FFQ in assessing habitual nutrients intake over the past year of 170 Malay adolescent boys and girls in Kelantan, Malaysia. The FFQ that consisted of 124 food items was assessed, whereas three days of 24-hours dietary recalls (DR) was administered as the standard criteria method. Estimated mean intake for most nutrients assessed by the FFQ were higher as compared to the three DRs (p<0.05). Pearson correlation coefficients for energy-adjusted nutrients intake between both methods were ranged from 0.22 (zinc) to 0.68 (calcium) with a median r-value of 0.43. The cross classification of quartile analysis showed that most nutrients were classified into the same or adjacent quartiles (median=52.7%). For the reproducibility of FFQ, the correlation of nutrients ranged from 0.43 for carotene to 0.86 for total fat intake (median=0.67), after adjusting for total energy intake. The newly developed dietary FFQ is a relatively good and valid tool in assessing habitual nutrients intake for the past year among Malay adolescents in Malaysia.