Measurement of dowel bar response in rigid pavement

DOT National Transportation Integrated Search

1999-01-01

The effectiveness of load transfer between adjacent slabs is an important component of long term rigid pavement performance. When load transfer is minimal or non-existent, concrete slabs must carry the full weight of truck axles across their entire l...

The development of performance prediction models for Virginia's interstate highway system.

DOT National Transportation Integrated Search

1995-01-01

Performance prediction models are a key component of any well-designed pavement management system. In this study, data compiled from the condition surveys conducted annually on Virginia's pavement network were used to develop prediction models for mo...

A method to assess the use of new and recycled materials in pavements.

DOT National Transportation Integrated Search

2015-04-01

This report includes the results of a research project aimed at developing a comprehensive analysis : framework for evaluating new and recycled materials to be used in pavements in Michigan. Two basic : components of the framework are: (i) Engineerin...

Effectiveness of Chip Sealing and Micro Surfacing on Pavement Serviceability and Life : Executive Summary Report

DOT National Transportation Integrated Search

2010-05-01

Chip Seal and Micro Surfacing are important components of ODOTs pavement preventive maintenance program. Thorough understanding of how well these treatments are performing is critical to the nature and extent of their continued use in the future. ...

User's guide: estimation of key PCC, base, subbase, and pavement engineering properties from routine tests and physical characteristics

DOT National Transportation Integrated Search

2012-08-01

Material characterization is a critical component of modern day pavement analysis, design, construction, quality : control/quality assurance, management, and rehabilitation. At each stage during the life of a project, the influence of : several funda...

Determination of the appropriate use of pavement surface history in the KDOT life-cycle analysis process.

DOT National Transportation Integrated Search

2008-09-01

The primary objective of this study was to evaluate KDOTs pavement surfacing history and recommend : whether or not the departments life-cycle cost analysis (LCCA) procedure should include a surfacing history : component, and, if so, how the LC...

Research of cost aspects of cement pavements construction

NASA Astrophysics Data System (ADS)

Bezuglyi, Artem; Illiash, Sergii; Tymoshchuk, Oleksandr

2017-09-01

The tendency to increasing traffic volume on public roads and to increased axle loads of vehicles makes the road scientists to develop scientifically justified methods for preserving the existing and developing the new transport network of Ukraine. One of the options for solving such issues is the construction of roads with rigid (cement concrete) pavement. However, any solution must be justified considering technical and economic components. This paper presents the results of the research of cost aspects of cement pavements construction.

The effect of loading time on flexible pavement dynamic response: a finite element analysis

NASA Astrophysics Data System (ADS)

Yin, Hao; Solaimanian, Mansour; Kumar, Tanmay; Stoffels, Shelley

2007-12-01

Dynamic response of asphalt concrete (AC) pavements under moving load is a key component for accurate prediction of flexible pavement performance. The time and temperature dependency of AC materials calls for utilizing advanced material characterization and mechanistic theories, such as viscoelasticity and stress/strain analysis. In layered elastic analysis, as implemented in the new Mechanistic-Empirical Pavement Design Guide (MEPDG), the time dependency is accounted for by calculating the loading times at different AC layer depths. In this study, the time effect on pavement response was evaluated by means of the concept of “pseudo temperature.” With the pavement temperature measured from instrumented thermocouples, the time and temperature dependency of AC materials was integrated into one single factor, termed “effective temperature.” Via this effective temperature, pavement responses under a transient load were predicted through finite element analysis. In the finite element model, viscoelastic behavior of AC materials was characterized through relaxation moduli, while the layers with unbound granular material were assumed to be in an elastic mode. The analysis was conducted for two different AC mixtures in a simplified flexible pavement structure at two different seasons. Finite element analysis results reveal that the loading time has a more pronounced impact on pavement response in the summer for both asphalt types. The results indicate that for reasonable prediction of dynamic response in flexible pavements, the effect of the depth-dependent loading time on pavement temperature should be considered.

Contributions of the Long-Term Pavement Performance Program to Pavement Management System Improvements: Better Data and Performance Models

DOT National Transportation Integrated Search

2008-05-21

The United States interstate highways and other components of the national highway system are approaching the end of their effective service lives. Many segments of this network have already surpassed their design lives and require frequent repair. S...

Road Asphalt Pavements Analyzed by Airborne Thermal Remote Sensing: Preliminary Results of the Venice Highway.

PubMed

Pascucci, Simone; Bassani, Cristiana; Palombo, Angelo; Poscolieri, Maurizio; Cavalli, Rosa

2008-02-22

This paper describes a fast procedure for evaluating asphalt pavement surface defects using airborne emissivity data. To develop this procedure, we used airborne multispectral emissivity data covering an urban test area close to Venice (Italy).For this study, we first identify and select the roads' asphalt pavements on Multispectral Infrared Visible Imaging Spectrometer (MIVIS) imagery using a segmentation procedure. Next, since in asphalt pavements the surface defects are strictly related to the decrease of oily components that cause an increase of the abundance of surfacing limestone, the diagnostic absorption emissivity peak at 11.2μm of the limestone was used for retrieving from MIVIS emissivity data the areas exhibiting defects on asphalt pavements surface.The results showed that MIVIS emissivity allows establishing a threshold that points out those asphalt road sites on which a check for a maintenance intervention is required. Therefore, this technique can supply local government authorities an efficient, rapid and repeatable road mapping procedure providing the location of the asphalt pavements to be checked.

Road Asphalt Pavements Analyzed by Airborne Thermal Remote Sensing: Preliminary Results of the Venice Highway

PubMed Central

Pascucci, Simone; Bassani, Cristiana; Palombo, Angelo; Poscolieri, Maurizio; Cavalli, Rosa

2008-01-01

This paper describes a fast procedure for evaluating asphalt pavement surface defects using airborne emissivity data. To develop this procedure, we used airborne multispectral emissivity data covering an urban test area close to Venice (Italy).For this study, we first identify and select the roads' asphalt pavements on Multispectral Infrared Visible Imaging Spectrometer (MIVIS) imagery using a segmentation procedure. Next, since in asphalt pavements the surface defects are strictly related to the decrease of oily components that cause an increase of the abundance of surfacing limestone, the diagnostic absorption emissivity peak at 11.2μm of the limestone was used for retrieving from MIVIS emissivity data the areas exhibiting defects on asphalt pavements surface.The results showed that MIVIS emissivity allows establishing a threshold that points out those asphalt road sites on which a check for a maintenance intervention is required. Therefore, this technique can supply local government authorities an efficient, rapid and repeatable road mapping procedure providing the location of the asphalt pavements to be checked. PMID:27879765

Modified pavement cement concrete

NASA Astrophysics Data System (ADS)

Botsman, L. N.; Ageeva, M. S.; Botsman, A. N.; Shapovalov, S. M.

2018-03-01

The paper suggests design principles of pavement cement concrete, which covers optimization of compositions and structures at the stage of mixture components selection due to the use of plasticizing agents and air-retaining substances that increase the viability of a concrete mixture. It also demonstrates advisability of using plasticizing agents together with air-retaining substances when developing pavement concrete compositions, which provides for the improvement of physical and mechanical properties of concrete and the reduction of cement binding agent consumption thus preserving strength indicators. The paper shows dependences of the main physical-mechanical parameters of concrete on cement consumption, a type and amount of additives.

Experimental pavement delineation treatments

NASA Astrophysics Data System (ADS)

Bryden, J. E.; Lorini, R. A.

1981-06-01

Visibility and durability of materials used to delineate shoulders and medians adjacent to asphalt pavements were evaluated. Materials evaluated were polysulfide and coal tar epoxies, one and two component polyesters, portland cement, acrylic paints, modified-alkyd traffic paint, preformed plastic tape, and thermoplastic markings. Neat applications, sand mortars, and surface treatments were installed in several geometric patterns including cross hatches, solid median treatments, and various widths of edge lines. Thermoplastic pavement markings generally performed very well, providing good visibility under adverse viewing conditions for at least 4 years. Thermoplastic 4 in. wide edge lines appear to provide adequate visibility for most conditions.

Synthesis study of nondestructive testing devices for use in overlay thickness design of flexible pavements

NASA Astrophysics Data System (ADS)

Smith, R. E.; Lytton, R. L.

1984-04-01

A ready reference for highway engineers who are interested in purchasing nondestructive testing (NDT) equipment for use in designing overlays for flexible pavements was prepared. All commercially available equipment is described. Information includes basic descriptions plus current prices quoted by the manufacturers/distributors. To determine user comments, a questionnaire was sent to nine State agencies, and one Federal agency. The responses to these questionnaires are summarized. Overlay thickness design procedures for flexible pavements are reviewed. Important components related to the use of NDT deflection measuremnts in overlay design are identified and addressed. Summary tables of equipment characteristics and overlay design procedures are presented.

Highway pavement performance test for colored thin anti-skidding layers

NASA Astrophysics Data System (ADS)

Gao, Wei; Cui, Wei; Xu, Ming

2018-03-01

Based on the actual service condition of highway pavement colored thin anti-skidding layers, with materials of color quartz sand and two-component acrylic resin as basis, we designed such tests as the bond strength, shearing strength, tear strength, fatigue performance and aggregate polished value, and included the freeze-thaw cycle and de-icing salt and other factors in the experiment, connecting with the climate characteristics of circumpolar latitude and low altitude in Heilongjiang province. Through the pavement performance test, it is confirmed that the colored thin anti-skidding layers can adapt to cold and humid climate conditions, and its physical mechanical properties are good.

Urban pavement surface temperature. Comparison of numerical and statistical approach

NASA Astrophysics Data System (ADS)

Marchetti, Mario; Khalifa, Abderrahmen; Bues, Michel; Bouilloud, Ludovic; Martin, Eric; Chancibaut, Katia

2015-04-01

The forecast of pavement surface temperature is very specific in the context of urban winter maintenance. to manage snow plowing and salting of roads. Such forecast mainly relies on numerical models based on a description of the energy balance between the atmosphere, the buildings and the pavement, with a canyon configuration. Nevertheless, there is a specific need in the physical description and the numerical implementation of the traffic in the energy flux balance. This traffic was originally considered as a constant. Many changes were performed in a numerical model to describe as accurately as possible the traffic effects on this urban energy balance, such as tires friction, pavement-air exchange coefficient, and infrared flux neat balance. Some experiments based on infrared thermography and radiometry were then conducted to quantify the effect fo traffic on urban pavement surface. Based on meteorological data, corresponding pavement temperature forecast were calculated and were compared with fiels measurements. Results indicated a good agreement between the forecast from the numerical model based on this energy balance approach. A complementary forecast approach based on principal component analysis (PCA) and partial least-square regression (PLS) was also developed, with data from thermal mapping usng infrared radiometry. The forecast of pavement surface temperature with air temperature was obtained in the specific case of urban configurtation, and considering traffic into measurements used for the statistical analysis. A comparison between results from the numerical model based on energy balance, and PCA/PLS was then conducted, indicating the advantages and limits of each approach.

Epoxy asphalt concrete is a perspective material for the construction of roads

NASA Astrophysics Data System (ADS)

Vyrozhemskyi, Valerii; Kopynets, Ivan; Kischynskyi, Sergii; Bidnenko, Nataliia

2017-09-01

An effective way to increase the durability of asphalt concrete pavements that are subject to high traffic loads and adverse weather and climatic factors is the use of polymer additives which drastically improve the rheological and physical-mechanical properties of bitumen. The use of thermosetting polymers including epoxy resins for asphalt and bitumen modification is seen as a perspective solution for this issue. Conducted at DerzhdorNDI SE studies have proved high riding qualities of asphalt pavements that contain epoxy resins. When replacing 20-35% of bitumen with epoxy component, a significant improvement in strength characteristics of asphalt pavement is noted, especially at elevated temperatures. Specific feature of epoxy asphalt concrete is its ability to gain strength over a long-term operation. Thus, despite the increased cost of epoxy asphalt concrete, long service life of pavements on its basis (up to 30 years as predicted) ensures a high profitability of using this material, especially on the roads with heavy traffic and severe traffic conditions.

Ground tire rubber (GTR) as a component material in concrete mixtures for paving concrete.

DOT National Transportation Integrated Search

2015-02-01

This research was done to investigate if the problems associated with flexibility and temperature sensitivity (expansion and : contraction) in roadway concrete pavements can be addressed by replacing some of the fine or coarse aggregate component : w...

Modeling the Hydrologic Processes of a Permeable Pavement ...

EPA Pesticide Factsheets

A permeable pavement system can capture stormwater to reduce runoff volume and flow rate, improve onsite groundwater recharge, and enhance pollutant controls within the site. A new unit process model for evaluating the hydrologic performance of a permeable pavement system has been developed in this study. The developed model can continuously simulate infiltration through the permeable pavement surface, exfiltration from the storage to the surrounding in situ soils, and clogging impacts on infiltration/exfiltration capacity at the pavement surface and the bottom of the subsurface storage unit. The exfiltration modeling component simulates vertical and horizontal exfiltration independently based on Darcy’s formula with the Green-Ampt approximation. The developed model can be arranged with physically-based modeling parameters, such as hydraulic conductivity, Manning’s friction flow parameters, saturated and field capacity volumetric water contents, porosity, density, etc. The developed model was calibrated using high-frequency observed data. The modeled water depths are well matched with the observed values (R2 = 0.90). The modeling results show that horizontal exfiltration through the side walls of the subsurface storage unit is a prevailing factor in determining the hydrologic performance of the system, especially where the storage unit is developed in a long, narrow shape; or with a high risk of bottom compaction and clogging. This paper presents unit

Oxygen demand of aircraft and airfield pavement deicers and alternative freezing point depressants

USGS Publications Warehouse

Corsi, Steven R.; Mericas, Dean; Bowman, George

2012-01-01

Aircraft and pavement deicing formulations and other potential freezing point depressants were tested for biochemical oxygen demand (BOD) and chemical oxygen demand (COD). Propylene glycol-based aircraft deicers exhibited greater BOD5 than ethylene glycol-based aircraft deicers, and ethylene glycol-based products had lower degradation rates than propylene glycol-based products. Sodium formate pavement deicers had lower COD than acetate-based pavement deicers. The BOD and COD results for acetate-based pavement deicers (PDMs) were consistently lower than those for aircraft deicers, but degradation rates were greater in the acetate-based PDM than in aircraft deicers. In a 40-day testing of aircraft and pavement deicers, BOD results at 20°C (standard) were consistently greater than the results from 5°C (low) tests. The degree of difference between standard and low temperature BOD results varied among tested products. Freshwater BOD test results were not substantially different from marine water tests at 20°C, but glycols degraded slower in marine water than in fresh water for low temperature tests. Acetate-based products had greater percentage degradation than glycols at both temperatures. An additive component of the sodium formate pavement deicer exhibited toxicity to the microorganisms, so BOD testing did not work properly for this formulation. BOD testing of alternative freezing point depressants worked well for some, there was little response for some, and for others there was a lag in response while microorganisms acclimated to the freezing point depressant as a food source. Where the traditional BOD5 test performed adequately, values ranged from 251 to 1,580 g/kg. Where the modified test performed adequately, values of BOD28 ranged from 242 to 1,540 g/kg.

Classroom Laboratory Report: Using an Image Database System in Engineering Education.

ERIC Educational Resources Information Center

Alam, Javed; And Others

1991-01-01

Describes an image database system assembled using separate computer components that was developed to overcome text-only computer hardware storage and retrieval limitations for a pavement design class. (JJK)

Design and implementation of PAVEMON: A GIS web-based pavement monitoring system based on large amounts of heterogeneous sensors data

NASA Astrophysics Data System (ADS)

Shahini Shamsabadi, Salar

A web-based PAVEment MONitoring system, PAVEMON, is a GIS oriented platform for accommodating, representing, and leveraging data from a multi-modal mobile sensor system. Stated sensor system consists of acoustic, optical, electromagnetic, and GPS sensors and is capable of producing as much as 1 Terabyte of data per day. Multi-channel raw sensor data (microphone, accelerometer, tire pressure sensor, video) and processed results (road profile, crack density, international roughness index, micro texture depth, etc.) are outputs of this sensor system. By correlating the sensor measurements and positioning data collected in tight time synchronization, PAVEMON attaches a spatial component to all the datasets. These spatially indexed outputs are placed into an Oracle database which integrates seamlessly with PAVEMON's web-based system. The web-based system of PAVEMON consists of two major modules: 1) a GIS module for visualizing and spatial analysis of pavement condition information layers, and 2) a decision-support module for managing maintenance and repair (Mℝ) activities and predicting future budget needs. PAVEMON weaves together sensor data with third-party climate and traffic information from the National Oceanic and Atmospheric Administration (NOAA) and Long Term Pavement Performance (LTPP) databases for an organized data driven approach to conduct pavement management activities. PAVEMON deals with heterogeneous and redundant observations by fusing them for jointly-derived higher-confidence results. A prominent example of the fusion algorithms developed within PAVEMON is a data fusion algorithm used for estimating the overall pavement conditions in terms of ASTM's Pavement Condition Index (PCI). PAVEMON predicts PCI by undertaking a statistical fusion approach and selecting a subset of all the sensor measurements. Other fusion algorithms include noise-removal algorithms to remove false negatives in the sensor data in addition to fusion algorithms developed for identifying features on the road. PAVEMON offers an ideal research and monitoring platform for rapid, intelligent and comprehensive evaluation of tomorrow's transportation infrastructure based on up-to-date data from heterogeneous sensor systems.

Distress modeling for DARWin-ME : final report.

DOT National Transportation Integrated Search

2013-12-01

Distress prediction models, or transfer functions, are key components of the Pavement M-E Design and relevant analysis. The accuracy of such models depends on a successful process of calibration and subsequent validation of model coefficients in the ...

Surface friction measurements of fine-graded asphalt mixtures : final report, June 2008.

DOT National Transportation Integrated Search

2008-06-01

Skid resistance is generated by the development of friction between the vehicle tire and : roadway surface, and is partially dependent upon the characteristics of the pavement : texture. Microtexture and macrotexture are the critical components of pa...

Structural performance of ultra-thin whitetopping on Illinois roadways and parking lots.

DOT National Transportation Integrated Search

2014-08-01

A performance evaluation of ultra-thin whitetopping (UTW) pavements in Illinois was undertaken in 20122014 : to evaluate current design procedures and to determine design life criteria for future projects. The two main : components of this evaluat...

Ground tire rubber (GTR) as a component material in concrete mixtures for paving concrete, phase 2 : [summary].

DOT National Transportation Integrated Search

2015-02-01

Using ground tire rubber (GTR) in : concrete mixtures is a possible solution : to mitigating flexibility and thermal : expansion issues with high-strength : concrete pavements. Florida State : University researchers designed concrete : mixtures using...

Phenomenological Modeling and Laboratory Simulation of Long-Term Aging of Asphalt Mixtures

NASA Astrophysics Data System (ADS)

Elwardany, Michael Dawoud

The accurate characterization of asphalt mixture properties as a function of pavement service life is becoming more important as more powerful pavement design and performance prediction methods are implemented. Oxidative aging is a major distress mechanism of asphalt pavements. Aging increases the stiffness and brittleness of the material, which leads to a high cracking potential. Thus, an improved understanding of the aging phenomenon and its effect on asphalt binder chemical and rheological properties will allow for the prediction of mixture properties as a function of pavement service life. Many researchers have conducted laboratory binder thin-film aging studies; however, this approach does not allow for studying the physicochemical effects of mineral fillers on age hardening rates in asphalt mixtures. Moreover, aging phenomenon in the field is governed by kinetics of binder oxidation, oxygen diffusion through mastic phase, and oxygen percolation throughout the air voids structure. In this study, laboratory aging trials were conducted on mixtures prepared using component materials of several field projects throughout the USA and Canada. Laboratory aged materials were compared against field cores sampled at different ages. Results suggested that oven aging of loose mixture at 95°C is the most promising laboratory long-term aging method. Additionally, an empirical model was developed in order to account for the effect of mineral fillers on age hardening rates in asphalt mixtures. Kinetics modeling was used to predict field aging levels throughout pavement thickness and to determine the required laboratory aging duration to match field aging. Kinetics model outputs are calibrated using measured data from the field to account for the effects of oxygen diffusion and percolation. Finally, the calibrated model was validated using independent set of field sections. This work is expected to provide basis for improved asphalt mixture and pavement design procedures in order to save taxpayers' money.

Estimation of low temperature properties of RAP binder without extraction : final report.

DOT National Transportation Integrated Search

2016-04-01

In recent years, the use of reclaimed asphalt pavement (RAP) as a component of asphalt mixtures has : become a common practice. For many years, researchers and DOT officials have questioned the adverse : effects, if any, of using solvents to extract ...

Tiled fuzzy Hough transform for crack detection

NASA Astrophysics Data System (ADS)

Vaheesan, Kanapathippillai; Chandrakumar, Chanjief; Mathavan, Senthan; Kamal, Khurram; Rahman, Mujib; Al-Habaibeh, Amin

2015-04-01

Surface cracks can be the bellwether of the failure of any component under loading as it indicates the component's fracture due to stresses and usage. For this reason, crack detection is indispensable for the condition monitoring and quality control of road surfaces. Pavement images have high levels of intensity variation and texture content, hence the crack detection is difficult. Moreover, shallow cracks result in very low contrast image pixels making their detection difficult. For these reasons, studies on pavement crack detection is active even after years of research. In this paper, the fuzzy Hough transform is employed, for the first time to detect cracks on any surface. The contribution of texture pixels to the accumulator array is reduced by using the tiled version of the Hough transform. Precision values of 78% and a recall of 72% are obtaining for an image set obtained from an industrial imaging system containing very low contrast cracking. When only high contrast crack segments are considered the values move to mid to high 90%.

Evaluation of Precast Panels for Airfield Pavement Repair. Phase 2: Results of Accelerated Pavement Testing

DTIC Science & Technology

2013-09-01

ER D C/ G SL T R -1 3 -2 4 Evaluation of Precast Panels for Airfield Pavement Repair Phase II: Results of Accelerated Pavement Testing...default. ERDC/GSL TR-13-24 September 2013 Evaluation of Precast Panels for Airfield Pavement Repair Phase II: Results of Accelerated Pavement ... pavement testing using a C-17 load cart to evaluate the performance of a precast portland cement concrete (PCC) pavement repair system. The system

The effect of contaminant on skid resistance of pavement surface

NASA Astrophysics Data System (ADS)

Lubis, A. S.; Muis, Z. A.; Gultom, E. M.

2018-03-01

Skid resistance of the pavement surface is the force generated by the movement of the wheels of the vehicle on the surface of the pavement. Contaminants are materials that cover the surface of the pavement affecting the skid resistance of the pavement surface. The contaminant acts as a coating interface or direct contact of the pavement surface with the wheels of the vehicle which can cause adverse effects, such as the decreasing value of skid resistance of the pavement surface. This study aims to analyze the effect of some types of contaminants on skid resistance of pavement surfaces. The contaminants that used in this study were water, sand, salt, and lubricating oil. The study was conducted by direct testing on two types of pavement: flexible pavement and rigid pavement. The measurements of the skid resistance were made using the British Pendulum Tester with British Pendulum Number for two conditions: before and after the pavement surface was covered with contaminants. The results showed that there was a contaminant effect on skid resistance of pavement surface. Skid resistance of pavement surfaces decreased after the contaminants were covered in water, sand, salt, and lubricant by 20.1%, 22.8%, 37.1% and 50.5% respectively.

Pavement markings and safety.

DOT National Transportation Integrated Search

2010-11-01

Previous research on pavement markings from a safety perspective tackled various issues such as pavement marking retroreflectivity : variability, relationship between pavement marking retroreflectivity and driver visibility, or pavement marking impro...

Development of a 3/4-inch minus base course type a specification for Montana : final report.

DOT National Transportation Integrated Search

2016-12-01

Gravel bases are a critical component of roads, providing drainage, structural support, and load distribution within the pavement structure. Montana specifications currently exist for a 2-inch minus (Grade 5A) and 1- inch minus (Grade 6A) crushed b...

Methods for assessing the polishing characteristics of coarse aggregates for use in pavement surface layers.

DOT National Transportation Integrated Search

2010-06-01

The predominant aggregate resources located in the western parts of Virginia are carbonate rocks. The mineral components of these rocks tend to be relatively soft and subject to abrasive wear under traffic that leads to a fairly rapid smoothing of th...

Expedient Repair Materials for Roadway Pavements

DTIC Science & Technology

2005-03-01

SILSPEC 900 PNS Patch/spall SSI Const. & Indus. Elastomeric conc. Matls Sikadur 22 Lo-Mod Sika Corp. Epoxy polymer concrete SikaTop 123 Plus Thin...patch Sika 2-component, polymer- 15 min modified Sikaset Roadway Patch Patch/spall Sika 1-comp. with high 15-25 min (15 min) (2000) alumina cement (not

49 CFR 571.122 - Standard No. 122; Motorcycle brake systems.

Code of Federal Regulations, 2012 CFR

2012-10-01

... mile before any brake application. Skid number means the frictional resistance of a pavement measured... control designed so that a leakage-type failure of a pressure component in a single subsystem (except... pounds). S5.8Service brake system design durability. Each motorcycle shall be capable of completing all...

An assessment of the skid resistance effect on traffic safety under wet-pavement conditions.

PubMed

Pardillo Mayora, José M; Jurado Piña, Rafael

2009-07-01

Pavement-tire friction provides the grip that is required for maintaining vehicle control and for stopping in emergency situations. Statistically significant negative correlations of skid resistance values and wet-pavement accident rates have been found in previous research. Skid resistance measured with SCRIM and crash data from over 1750km of two-lane rural roads in the Spanish National Road System were analyzed to determine the influence of pavement conditions on safety and to assess the effects of improving pavement friction on safety. Both wet- and dry-pavement crash rates presented a decreasing trend as skid resistance values increased. Thresholds in SCRIM coefficient values associated with significant decreases in wet-pavement crash rates were determined. Pavement friction improvement schemes were found to yield significant reductions in wet-pavement crash rates averaging 68%. The results confirm the importance of maintaining adequate levels of pavement friction to safeguard traffic safety as well as the potential of pavement friction improvement schemes to achieve significant crash reductions.

A probabilistic and adaptive approach to modeling performance of pavement infrastructure

DOT National Transportation Integrated Search

2007-08-01

Accurate prediction of pavement performance is critical to pavement management agencies. Reliable and accurate predictions of pavement infrastructure performance can save significant amounts of money for pavement infrastructure management agencies th...

California state of the pavement report, 1999

DOT National Transportation Integrated Search

2001-03-01

This report presents the results of the 1999 Pavement Condition Survey for the State of California. It gives an overview of pavement conditions, vehicle miles traveled on rough pavements, needs classification, and pavement performance. For each of th...

Analysis relating to pavement material characterizations and their effects on pavement performance.

DOT National Transportation Integrated Search

1998-01-01

This report presents the analysis conducted on relating pavement performance or response measures and design considerations to specific pavement layers utilizing data contained in the Long-Term Pavement Performance Program National Information Manage...

Mechanistic-empirical pavement design guide calibration for pavement rehabilitation.

DOT National Transportation Integrated Search

2013-01-01

The Oregon Department of Transportation (ODOT) is in the process of implementing the recently introduced AASHTO : Mechanistic-Empirical Pavement Design Guide (MEPDG) for new pavement sections. The majority of pavement work : conducted by ODOT involve...

Base course resilient modulus for the mechanistic-empirical pavement design guide : [summary].

DOT National Transportation Integrated Search

2011-01-01

Elastic modulus determination is often used in designing pavements and evaluating pavement performance. The Mechanistic-Empirical Pavement Design Guide (MEPDG) has become an important source of guidance for pavement design and rehabilitation. MEPDG r...

Improving Rutting Resistance of Pavement Structures Using Geosynthetics: An Overview

PubMed Central

Karim, Mohamed Rehan; Khodaii, Ali; Almasi, Mohammad Hadi

2014-01-01

A pavement structure consists of several layers for the primary purpose of transmitting and distributing traffic loads to the subgrade. Rutting is one form of pavement distresses that may influence the performance of road pavements. Geosynthetics is one type of synthetic materials utilized for improving the performance of pavements against rutting. Various studies have been conducted on using different geosynthetic materials in pavement structures by different researchers. One of the practices is a reinforcing material in asphalt pavements. This paper intends to present and discuss the discoveries from some of the studies on utilizing geosynthetics in flexible pavements as reinforcement against permanent deformation (rutting). PMID:24526919

Improving rutting resistance of pavement structures using geosynthetics: an overview.

PubMed

Mirzapour Mounes, Sina; Karim, Mohamed Rehan; Khodaii, Ali; Almasi, Mohammad Hadi

2014-01-01

A pavement structure consists of several layers for the primary purpose of transmitting and distributing traffic loads to the subgrade. Rutting is one form of pavement distresses that may influence the performance of road pavements. Geosynthetics is one type of synthetic materials utilized for improving the performance of pavements against rutting. Various studies have been conducted on using different geosynthetic materials in pavement structures by different researchers. One of the practices is a reinforcing material in asphalt pavements. This paper intends to present and discuss the discoveries from some of the studies on utilizing geosynthetics in flexible pavements as reinforcement against permanent deformation (rutting).

Performance trends of rehabilitated AC pavements

DOT National Transportation Integrated Search

2000-10-01

The General Pavement Study (GPS) 6 experiment, "AC Overlay of AC Pavements," involves pavement test sections where an asphalt concrete (AC) overlay was placed on an existing AC pavement. This TechBrief summarizes the results of a study of the GPS-6 e...

Fatigue cracking in road pavement

NASA Astrophysics Data System (ADS)

Mackiewicz, P.

2018-05-01

The article presents the problem of modelling fatigue phenomena occurring in the road pavement. The example of two selected pavements shows the changes occurring under the influence of the load in different places of the pavement layers. Attention is paid to various values of longitudinal and transverse strains generated at the moment of passing the wheel on the pavement. It was found that the key element in the crack propagation analysis is the method of transferring the load to the pavement by the tire and the strain distribution in the pavement. During the passage of the wheel in the lower layers of the pavement, a complex stress state arises. Then vertical, horizontal and tangent stresses with various values appear. The numerical analyses carried out with the use of finite element methods allowed to assess the strain and stress changes occurring in the process of cracking road pavement. It has been shown that low-thickness pavements are susceptible to fatigue cracks arising "bottom to top", while pavements thicker are susceptible to "top to bottom" cracks. The analysis of the type of stress allowed to determine the cracking mechanism.

Evaluation of Procedures for Backcalculation of Airfield Pavement Moduli

DTIC Science & Technology

2015-08-01

to develop pavement design and structural evaluation criteria, procedures, and software to ensure that its airfield pavements can support mission...aircraft. As tire pressures and aircraft weights have increased steadily during this time, the design and evaluation software– Pavement -Transportation...the remaining life for the pavement in terms of remaining pavement life (passes-to-failure) or allowable gross aircraft loads and also to design

Laboratory pavement polishing device (wear machine) versus field friction test units and accumulative traffic (ADT). Phase 2. Correlation study

NASA Astrophysics Data System (ADS)

Godwin, H. F.; Loyed, D. B.; Miley, W. G.; Page, G. C.

1981-04-01

The degree to which pavement wear (vehicular traffic) could be predicted from testing samples of in-service pavements in the laboratory pavement polishing device was determined. This investigation was made on asphaltic concrete pavements, primarily friction courses used in Florida. These pavements were tested at different levels of accumulative traffic (ADT) for approximately 2 years.

Proceedings. National conference on preservation, repair, and rehabilitation of concrete pavements, St. Louis, Missouri, April 21-24, 2009.

DOT National Transportation Integrated Search

2009-01-01

Part 1Pavement Condition Evaluation, Impact, and Durability; Part 2Concrete Pavement Preservation, Repair, and Rehabilitation; Part 3Concrete Pavement Repair Techniques and Experiences; Part 4Concrete Pavement Surface Texture; Part 5Emergin...

Onsite use of recycled asphalt pavement materials and geocells to reconstruct pavements damaged by heavy trucks.

DOT National Transportation Integrated Search

2011-07-01

Asphalt pavements deteriorate with traffic (especially heavy trucks) and time. Maintenance and overlaying may solve minor to : medium pavement distress problems. When the condition of a pavement becomes badly deteriorated, reconstruction of the : pav...

Chapter G: Tentative Correlation Between CIPW Normin pl (Total Plagioclase) and Los Angeles Wear in Precambrian Midcontinental Granites-Examples from Missouri and Oklahoma, with Applications and Limitations for Use

USGS Publications Warehouse

Davis, George H.

2004-01-01

The normative chemical classification of Cross, Iddings, Pirsson, and Washington (CIPW) is commonly used in igneous petrology to distinguish igneous rocks by comparing their magmatic chemistries for similar and dissimilar components. A potential use for this classification other than in petrologic studies is in the rapid assessment of aggregate sources, possibly leading to an economic advantage for an aggregate producer or user, by providing the opportunity to determine whether further physical testing of an aggregate is warranted before its use in asphalt or concrete pavement. However, the CIPW classification currently should not be substituted for the physical testing required in specifications by State departments of transportation. Demands for physical testing of aggregates have increased nationally as users seek to maximize the quality of the aggregate they purchase for their pavements. Concrete pavements are being laid with increased thicknesses to withstand increasing highway loads. New pavement mixes, most notably Superior Performance Asphalt Pavement ('Superpave'), are designed for additional service life. For both concrete and asphalt, the intent is to generate a durable pavement with a longer service life that should decrease overall life-cycle costs. Numerous aggregate producers possess chemical-composition data available for examination to answer questions from the potential user. State geological surveys also possess chemical-composition data for stone sources. Paired with the results of physical testing, chemical- composition data provide indicative information about stone durability and aggregate strength. The Missouri Department of Transportation has noted a possible relation among coarse-grained Precambrian granites of the midcontinental region, correlating the results of abrasion testing with the contents of normative minerals, also known as normins, calculated from chemical composition data. Thus, normin pl ( total plagioclase) can predict, by way of simple regression, the Los Angeles wear for granite samples collected in Missouri. The results of this abrasion testing were extended to another granite in Oklahoma where normin pl predicted Los Angeles wear to within 0.6 percent. This relation may also exist for granitic rocks outside the Oklahoma-Missouri region, as well as for other igneous-rock types.

Assessment of the Uretek process on continuously reinforced concrete pavement, jointed concrete pavement, and bridge approach slabs : technical assistance report.

DOT National Transportation Integrated Search

2004-12-01

This study evaluates the rehabilitation method utilizing the injection of Uretek (polyurethane) into the pavement structures on continuously reinforced concrete pavement (CRCP), jointed concrete pavement (JCP), and bridge approach slabs. The polyuret...

MoDOT pavement preservation research program volume III, development of pavement family and treatment performance models.

DOT National Transportation Integrated Search

2015-10-01

Pavement performance models describe the deterioration behavior of pavements. They are essential in a pavement management : system if the goal is to make more objective, reliable, and cost-effective decisions regarding the timing and nature of paveme...

Application of high performance concrete in the pavement system : structural response of high performance concrete pavements.

DOT National Transportation Integrated Search

2002-03-01

Rigid pavements make up a significant percentage of highway systems in the United States and abroad. Concrete pavements provide an economical and durable solution for highway systems, because the pavements last longer and require less maintenance. Re...

Calibration of pavement response models for the mechanistic-empirical pavement design method

DOT National Transportation Integrated Search

2007-09-01

Most pavement design methodologies assume that the tire-pavement contact stress is equal to the tire inflation pressure and uniformly distributed over a circular contact area. However, tire-pavement contact area is not in a circular shape and the con...

Application of high performance concrete in the pavement system : structural response of high performance concrete pavement : executive summary.

DOT National Transportation Integrated Search

2002-01-01

Rigid pavements make up a significant percentage of highway systems in the United States and abroad. Concrete pavements provide an economical and durable solution for highway systems, because the pavements last longer and require less maintenance. Re...

Fiberglass-Reinforced Rigid Polyurethane Expedient Pavement Subject to Simulated F-4 Aircraft Traffic.

DTIC Science & Technology

1980-05-01

34 4,. * ., Table B-I. CPR-739 Rigid Polyurethane Foam Component Characteristics [ Cream Time, 120 sec; Rise Time, 13 sec; Cure Time, 24 hr at 750F...INC. E Colic Soil Tech Dept. Pennsauken. NJ SANDIA LABORATORIES Library Div., Livermore CA SCHUPACK ASSOC SO. NORWALK. CT (SCHUPACK) SHELL OIL CO

49 CFR 571.122 - Standard No. 122; Motorcycle brake systems.

Code of Federal Regulations, 2011 CFR

2011-10-01

... mile before any brake application. Skid number means the frictional resistance of a pavement measured... subsystems actuated by a single control designed so that a leakage-type failure of a pressure component in a...), but not less than 0 Newtons (0 pounds). S5.8Service brake system design durability. Each motorcycle...

49 CFR 571.122 - Standard No. 122; Motorcycle brake systems.

Code of Federal Regulations, 2010 CFR

2010-10-01

... mile before any brake application. Skid number means the frictional resistance of a pavement measured... subsystems actuated by a single control designed so that a leakage-type failure of a pressure component in a...), but not less than 0 Newtons (0 pounds). S5.8Service brake system design durability. Each motorcycle...

49 CFR 571.105 - Standard No. 105; Hydraulic and electric brake systems.

Code of Federal Regulations, 2014 CFR

2014-10-01

... current, and which may include a non-electrical source of power designed to charge batteries and... dissipating electrical energy. Skid number means the frictional resistance of a pavement measured in..., designed so that a single failure in any subsystem (such as a leakage-type failure of a pressure component...

49 CFR 571.105 - Standard No. 105; Hydraulic and electric brake systems.

Code of Federal Regulations, 2012 CFR

2012-10-01

... current, and which may include a non-electrical source of power designed to charge batteries and... dissipating electrical energy. Skid number means the frictional resistance of a pavement measured in..., designed so that a single failure in any subsystem (such as a leakage-type failure of a pressure component...

49 CFR 571.105 - Standard No. 105; Hydraulic and electric brake systems.

Code of Federal Regulations, 2013 CFR

2013-10-01

... current, and which may include a non-electrical source of power designed to charge batteries and... dissipating electrical energy. Skid number means the frictional resistance of a pavement measured in..., designed so that a single failure in any subsystem (such as a leakage-type failure of a pressure component...

Evaluation of Long-Term Pavement Performance (LTTP) Climatic Data for Use in Mechanistic-Empirical Pavement Design Guide (MEPDG) Calibration and Other Pavement Analysis

DOT National Transportation Integrated Search

2015-05-01

Improvements in the Long-Term Pavement Performance (LTPP) Programs climate data are needed to support current and future research into climate effects on pavement materials, design, and performance. The calibration and enhancement of the Mechanist...

Effectiveness of various public private partnership pavement rehabilitation treatments: A big data informatics survival analysis of pavement service life : final report.

DOT National Transportation Integrated Search

2017-09-29

Past research efforts have used a wide variety of methodological approaches to analyze pavement performance indicators, pavement rehabilitation treatments, and pavement service life. Using big data informatics methods, the intent of this study is to ...

Extending the Service Life of Pavements

NASA Astrophysics Data System (ADS)

Gschwendt, Ivan

2018-03-01

The cost of road construction and expenditures on the maintenance of pavements, i.e., their whole life cost, represents a lot of money. The paper describes a procedure for a pavement management system with degradation models and estimates the length of time for the rehabilitation of an asphalt pavement. Using a theory of pavement mechanics, we calculated the stresses and strains on the layers of two pavement models. High modulus asphalt concrete, an asphalt mix with a high binder content, and an asphalt mix with binder modifications are new road building materials. Prolonging the time for the rehabilitation of pavements is possible.

A new structure of permeable pavement for mitigating urban heat island.

PubMed

Liu, Yong; Li, Tian; Peng, Hangyu

2018-09-01

The urban heat island (UHI) effect has been a great threat to human habitation, and how to mitigate this problem has been a global concern over decades. This paper addresses the cooling effect of a novel permeable pavement called evaporation-enhancing permeable pavement, which has capillary columns in aggregate and a liner at the bottom. To explore the efficiency of mitigating the UHI, bench-scale permeable pavement units with capillary columns were developed and compared with conventional permeable pavement. Criteria of capillary capacities of the column, evaporation rates, and surface temperature of the pavements were monitored under simulated rainfall and Shanghai local weather conditions. Results show the capillary column was important in increasing evaporation by lifting water from the bottom to the surface, and the evaporation-enhancing permeable pavement was cooler than a conventional permeable pavement by as much as 9.4°C during the experimental period. Moreover, the cooling effect of the former pavement could persist more than seven days under the condition of no further rainfall. Statistical analysis result reveals that evaporation-enhancing permeable pavement can mitigate the UHI effect significantly more than a conventional permeable pavement. Copyright © 2018 Elsevier B.V. All rights reserved.

Impact of pavement conditions on crash severity.

PubMed

Li, Yingfeng; Liu, Chunxiao; Ding, Liang

2013-10-01

Pavement condition has been known as a key factor related to ride quality, but it is less clear how exactly pavement conditions are related to traffic crashes. The researchers used Geographic Information System (GIS) to link Texas Department of Transportation (TxDOT) Crash Record Information System (CRIS) data and Pavement Management Information System (PMIS) data, which provided an opportunity to examine the impact of pavement conditions on traffic crashes in depth. The study analyzed the correlation between several key pavement condition ratings or scores and crash severity based on a large number of crashes in Texas between 2008 and 2009. The results in general suggested that poor pavement condition scores and ratings were associated with proportionally more severe crashes, but very poor pavement conditions were actually associated with less severe crashes. Very good pavement conditions might induce speeding behaviors and therefore could have caused more severe crashes, especially on non-freeway arterials and during favorable driving conditions. In addition, the results showed that the effects of pavement conditions on crash severity were more evident for passenger vehicles than for commercial vehicles. These results provide insights on how pavement conditions may have contributed to crashes, which may be valuable for safety improvement during pavement design and maintenance. Readers should notice that, although the study found statistically significant effects of pavement variables on crash severity, the effects were rather minor in reality as suggested by frequency analyses. Copyright © 2013 Elsevier Ltd. All rights reserved.

The effects of varying the tire cap ply, sidewall filler height and pavement surface texture on tire/pavement noise generation

DOT National Transportation Integrated Search

2003-02-01

In order to better understand the effect of tire carcass construction and pavement texture on tire/pavement noise generation, a measurement program was conducted on a group of four automobile tires on three pavement textures. The tires included all c...

23 CFR 971.208 - Federal lands pavement management system (PMS).

Code of Federal Regulations, 2012 CFR

2012-04-01

... 23 Highways 1 2012-04-01 2012-04-01 false Federal lands pavement management system (PMS). 971.208... lands pavement management system (PMS). In addition to the requirements provided in § 971.204, the PMS... the concepts described in the AASHTO's “Pavement Management Guide.” 1 1 “Pavement Management Guide...

23 CFR 971.208 - Federal lands pavement management system (PMS).

Code of Federal Regulations, 2010 CFR

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false Federal lands pavement management system (PMS). 971.208... lands pavement management system (PMS). In addition to the requirements provided in § 971.204, the PMS... the concepts described in the AASHTO's “Pavement Management Guide.” 1 1 “Pavement Management Guide...

23 CFR 973.208 - Indian lands pavement management system (PMS).

Code of Federal Regulations, 2013 CFR

2013-04-01

... 23 Highways 1 2013-04-01 2013-04-01 false Indian lands pavement management system (PMS). 973.208... PROGRAM Bureau of Indian Affairs Management Systems § 973.208 Indian lands pavement management system (PMS... concepts described in the AASHTO's “Pavement Management Guide.” 1 1 “Pavement Management Guide,” AASHTO...

23 CFR 973.208 - Indian lands pavement management system (PMS).

Code of Federal Regulations, 2010 CFR

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false Indian lands pavement management system (PMS). 973.208... PROGRAM Bureau of Indian Affairs Management Systems § 973.208 Indian lands pavement management system (PMS... concepts described in the AASHTO's “Pavement Management Guide.” 1 1 “Pavement Management Guide,” AASHTO...

23 CFR 971.208 - Federal lands pavement management system (PMS).

Code of Federal Regulations, 2011 CFR

2011-04-01

... 23 Highways 1 2011-04-01 2011-04-01 false Federal lands pavement management system (PMS). 971.208... lands pavement management system (PMS). In addition to the requirements provided in § 971.204, the PMS... the concepts described in the AASHTO's “Pavement Management Guide.” 1 1 “Pavement Management Guide...

23 CFR 971.208 - Federal lands pavement management system (PMS).

Code of Federal Regulations, 2014 CFR

2014-04-01

... 23 Highways 1 2014-04-01 2014-04-01 false Federal lands pavement management system (PMS). 971.208... lands pavement management system (PMS). In addition to the requirements provided in § 971.204, the PMS... the concepts described in the AASHTO's “Pavement Management Guide.” 1 1 “Pavement Management Guide...

23 CFR 973.208 - Indian lands pavement management system (PMS).

Code of Federal Regulations, 2012 CFR

2012-04-01

... 23 Highways 1 2012-04-01 2012-04-01 false Indian lands pavement management system (PMS). 973.208... PROGRAM Bureau of Indian Affairs Management Systems § 973.208 Indian lands pavement management system (PMS... concepts described in the AASHTO's “Pavement Management Guide.” 1 1 “Pavement Management Guide,” AASHTO...

23 CFR 971.208 - Federal lands pavement management system (PMS).

Code of Federal Regulations, 2013 CFR

2013-04-01

... 23 Highways 1 2013-04-01 2013-04-01 false Federal lands pavement management system (PMS). 971.208... lands pavement management system (PMS). In addition to the requirements provided in § 971.204, the PMS... the concepts described in the AASHTO's “Pavement Management Guide.” 1 1 “Pavement Management Guide...

23 CFR 973.208 - Indian lands pavement management system (PMS).

Code of Federal Regulations, 2014 CFR

2014-04-01

... 23 Highways 1 2014-04-01 2014-04-01 false Indian lands pavement management system (PMS). 973.208... PROGRAM Bureau of Indian Affairs Management Systems § 973.208 Indian lands pavement management system (PMS... concepts described in the AASHTO's “Pavement Management Guide.” 1 1 “Pavement Management Guide,” AASHTO...

23 CFR 973.208 - Indian lands pavement management system (PMS).

Code of Federal Regulations, 2011 CFR

2011-04-01

... 23 Highways 1 2011-04-01 2011-04-01 false Indian lands pavement management system (PMS). 973.208... PROGRAM Bureau of Indian Affairs Management Systems § 973.208 Indian lands pavement management system (PMS... concepts described in the AASHTO's “Pavement Management Guide.” 1 1 “Pavement Management Guide,” AASHTO...

Preparation for implementation of the mechanistic-empirical pavement design guide in Michigan, part 3 : local calibration and validation of the pavement-ME performance models.

DOT National Transportation Integrated Search

2014-11-01

The main objective of Part 3 was to locally calibrate and validate the mechanistic-empirical pavement : design guide (Pavement-ME) performance models to Michigan conditions. The local calibration of the : performance models in the Pavement-ME is a ch...

Thermal stability analysis under embankment with asphalt pavement and cement pavement in permafrost regions.

PubMed

Junwei, Zhang; Jinping, Li; Xiaojuan, Quan

2013-01-01

The permafrost degradation is the fundamental cause generating embankment diseases and pavement diseases in permafrost region while the permafrost degradation is related with temperature. Based on the field monitoring results of ground temperature along G214 Highway in high temperature permafrost regions, both the ground temperatures in superficial layer and the annual average temperatures under the embankment were discussed, respectively, for concrete pavements and asphalt pavements. The maximum depth of temperature field under the embankment for concrete pavements and asphalt pavements was also studied by using the finite element method. The results of numerical analysis indicate that there were remarkable seasonal differences of the ground temperatures in superficial layer between asphalt pavement and concrete pavement. The maximum influencing depth of temperature field under the permafrost embankment for every pavement was under the depth of 8 m. The thawed cores under both embankments have close relation with the maximum thawed depth, the embankment height, and the service time. The effective measurements will be proposed to keep the thermal stabilities of highway embankment by the results.

Thermal Stability Analysis under Embankment with Asphalt Pavement and Cement Pavement in Permafrost Regions

PubMed Central

Jinping, Li; Xiaojuan, Quan

2013-01-01

The permafrost degradation is the fundamental cause generating embankment diseases and pavement diseases in permafrost region while the permafrost degradation is related with temperature. Based on the field monitoring results of ground temperature along G214 Highway in high temperature permafrost regions, both the ground temperatures in superficial layer and the annual average temperatures under the embankment were discussed, respectively, for concrete pavements and asphalt pavements. The maximum depth of temperature field under the embankment for concrete pavements and asphalt pavements was also studied by using the finite element method. The results of numerical analysis indicate that there were remarkable seasonal differences of the ground temperatures in superficial layer between asphalt pavement and concrete pavement. The maximum influencing depth of temperature field under the permafrost embankment for every pavement was under the depth of 8 m. The thawed cores under both embankments have close relation with the maximum thawed depth, the embankment height, and the service time. The effective measurements will be proposed to keep the thermal stabilities of highway embankment by the results. PMID:24027444

Development of Pavement Temperature Contours for India

NASA Astrophysics Data System (ADS)

Nivitha, M. R.; Krishnan, J. M.

2014-06-01

The stress-strain response of the bituminous pavements is highly sensitive to temperature. To systematically analyze the pavement performance, it is necessary that one understands the variation of pavement temperature spatially and temporally during the life time of a pavement. In this investigation, historic air temperature data for 37 locations across India was collected. Using this database, pavement temperature data was predicted by an appropriate air temperature-pavement temperature model. High and low temperature pavement temperature contours were generated for the first time for India. It was seen that the locations spanning from Srinagar to Madhya Pradesh and Rajasthan to Orissa were extremely critical. The minimum temperature in these locations was 10 C and the maximum temperature was around 68 C. Clearly such information is necessary when making choice of binder grade and bituminous layer thickness.

Guide to cement-based integrated pavement solutions.

DOT National Transportation Integrated Search

2011-08-01

This guide provides a clear, concise, and cohesive presentation of cement-bound materials options for 10 : specific engineering pavement applications: new concrete pavements, concrete overlays, pervious concrete, : precast pavements, roller-compacted...

Mechanistic-empirical Pavement Design Guide Implementation

DOT National Transportation Integrated Search

2010-06-01

The recently introduced Mechanistic-Empirical Pavement Design Guide (MEPDG) and associated computer software provides a state-of-practice mechanistic-empirical highway pavement design methodology. The MEPDG methodology is based on pavement responses ...

Optimization and standardization of pavement management processes.

DOT National Transportation Integrated Search

2004-08-01

This report addresses issues related to optimization and standardization of current pavement management processes in Kentucky. Historical pavement management records were analyzed, which indicates that standardization is necessary in future pavement ...

Mechanics based model for predicting structure-induced rolling resistance (SRR) of the tire-pavement system

NASA Astrophysics Data System (ADS)

Shakiba, Maryam; Ozer, Hasan; Ziyadi, Mojtaba; Al-Qadi, Imad L.

2016-11-01

The structure-induced rolling resistance of pavements, and its impact on vehicle fuel consumption, is investigated in this study. The structural response of pavement causes additional rolling resistance and fuel consumption of vehicles through deformation of pavement and various dissipation mechanisms associated with inelastic material properties and damping. Accurate and computationally efficient models are required to capture these mechanisms and obtain realistic estimates of changes in vehicle fuel consumption. Two mechanistic-based approaches are currently used to calculate vehicle fuel consumption as related to structural rolling resistance: dissipation-induced and deflection-induced methods. The deflection-induced approach is adopted in this study, and realistic representation of pavement-vehicle interactions (PVIs) is incorporated. In addition to considering viscoelastic behavior of asphalt concrete layers, the realistic representation of PVIs in this study includes non-uniform three-dimensional tire contact stresses and dynamic analysis in pavement simulations. The effects of analysis type, tire contact stresses, pavement viscoelastic properties, pavement damping coefficients, vehicle speed, and pavement temperature are then investigated.

Pavement Performance : Approaches Using Predictive Analytics

DOT National Transportation Integrated Search

2018-03-23

Acceptable pavement condition is paramount to road safety. Using predictive analytics techniques, this project attempted to develop models that provide an assessment of pavement condition based on an array of indictors that include pavement distress,...

Evaluation of the effectiveness of drainage layers.

DOT National Transportation Integrated Search

2007-12-31

Research has shown that pavement subdrainage systems can increase the life of pavements by removing : water that is detrimental to the pavement structure. The Mississippi Department of Transportation (MDOT) : began including pavement subdrainage syst...

Minnesota Local Agency Pavement Marking : Mining Existing Data

DOT National Transportation Integrated Search

2017-11-01

Pavement marking is important for safety. Maximizing pavement marking performance in terms of increased retroreflectivity, within limited budget constraints, allows agencies to make better decisions toward providing more effective pavement marking pe...

Quantitative analysis of microtubule orientation in interdigitated leaf pavement cells.

PubMed

Akita, Kae; Higaki, Takumi; Kutsuna, Natsumaro; Hasezawa, Seiichiro

2015-01-01

Leaf pavement cells are shaped like a jigsaw puzzle in most dicotyledon species. Molecular genetic studies have identified several genes required for pavement cells morphogenesis and proposed that microtubules play crucial roles in the interdigitation of pavement cells. In this study, we performed quantitative analysis of cortical microtubule orientation in leaf pavement cells in Arabidopsis thaliana. We captured confocal images of cortical microtubules in cotyledon leaf epidermis expressing GFP-tubulinβ and quantitatively evaluated the microtubule orientations relative to the pavement cell growth axis using original image processing techniques. Our results showed that microtubules kept parallel orientations to the growth axis during pavement cell growth. In addition, we showed that immersion treatment of seed cotyledons in solutions containing tubulin polymerization and depolymerization inhibitors decreased pavement cell complexity. Treatment with oryzalin and colchicine inhibited the symmetric division of guard mother cells.

Tactile pavement for guiding walking direction: An assessment of heading direction and gait stability.

PubMed

Pluijter, Nanda; de Wit, Lieke P W; Bruijn, Sjoerd M; Plaisier, Myrthe A

2015-10-01

For maintaining heading direction while walking we heavily rely on vision. Therefore, walking in the absence of vision or with visual attention directed elsewhere potentially leads to dangerous situations. Here we investigated whether tactile information from the feet can be used as a (partial) substitute for vision in maintaining a stable heading direction. If so, participants should be better able to keep a constant heading direction on tactile pavement that indicates directionality than on regular flat pavement. However, such a pavement may also be destabilizing. Thus we asked participants to walk straight ahead on regular pavement, and on tactile pavement (tiles with ridges along the walking direction) while varying the amount of vision. We assessed the effects of the type of pavement as well as the amount of vision on the variability of the heading direction as well as gait stability. Both of these measures were calculated from accelerations and angular velocities recorded from a smartphone attached to the participants trunk. Results showed that on tactile pavement participants had a less variations in their heading direction than on regular pavement. The drawback, however, was that the tactile pavement used in this study decreased gait stability. In sum, tactile pavement can be used as a partial substitute for vision in maintaining heading direction, but it can also decrease gait stability. Future work should focus on designing tactile pavement that does provided directional clues, but is less destabilizing. Copyright © 2015 Elsevier B.V. All rights reserved.

Assessment of Asphalt Concrete Reinforcement Grid in Flexible Pavements

DTIC Science & Technology

2016-05-01

Guide for the Design of Pavement Structures (1993) remains in use and describes in detail the accepted procedures for both the design and maintenance...of pavement structures. Design considerations include pavement perfor- mance, traffic, subgrade soil, construction materials, environment, drain- age...Association of State Highway and Transportation Officials). 1993. Guide for the Design of Pavement Structures. Washington, DC: American Association of

Proactive pavement asset management with climate change aspects

NASA Astrophysics Data System (ADS)

Zofka, Adam

2018-05-01

Pavement Asset Management System is a systematic and objective tool to manage pavement network based on the rational, engineering and economic principles. Once implemented and mature Pavement Asset Management System serves the entire range of users starting with the maintenance engineers and ending with the decision-makers. Such a system is necessary to coordinate agency management strategy including proactive maintenance. Basic inputs in the majority of existing Pavement Asset Management System approaches comprise the actual pavement inventory with associated construction history and condition, traffic information as well as various economical parameters. Some Pavement Management System approaches include also weather aspects which is of particular importance considering ongoing climate changes. This paper presents challenges in implementing the Pavement Asset Management System for those National Road Administrations that manage their pavement assets using more traditional strategies, e.g. worse-first approach. Special considerations are given to weather-related inputs and associated analysis to demonstrate the effects of climate change in a short- and long-term range. Based on the presented examples this paper concludes that National Road Administrations should account for the weather-related factors in their Pavement Management Systems as this has a significant impact on the system outcomes from the safety and economical perspective.

Performance of pervious pavement parking bays storing rainwater in the north of Spain.

PubMed

Gomez-Ullate, E; Bayon, J R; Coupe, S; Castro-Fresno, D

2010-01-01

Pervious pavements are drainage techniques that improve urban water management in a sustainable manner. An experimental pervious pavement parking area has been constructed in the north of Spain (Santander), with the aim of harvesting good quality rainwater. Forty-five pervious pavement structures have been designed and constructed to measure stored water quantity and quality simultaneously. Ten of these structures are specifically constructed with different geotextile layers for improving water storage within the pavements. Following the confirmation in previous laboratory experiments that the geotextile influenced on water storage, two different geosynthetics (Inbitex and a One Way evaporation control membrane) and control pervious pavements with no geotextile layers were tested in the field. Weather conditions were monitored in order to find correlations with the water storage within the pervious pavement models tested. During one year of monitoring the three different pervious pavement types tested remained at their maximum storage capacity. The heavy rain events which occurred during the experimental period caused evaporation rates within the pervious pavements to be not significant, but allowed the researchers to observe certain trends in the water storage. Temperature was the most closely correlated weather factor with the level of the water stored within the pervious pavements tested.

Study on Flexible Pavement Failures in Soft Soil Tropical Regions

NASA Astrophysics Data System (ADS)

Jayakumar, M.; Chee Soon, Lee

2015-04-01

Road network system experienced rapid upgrowth since ages ago and it started developing in Malaysia during the colonization of British due to its significant impacts in transportation field. Flexible pavement, the major road network in Malaysia, has been deteriorating by various types of distresses which cause descending serviceability of the pavement structure. This paper discusses the pavement condition assessment carried out in Sarawak and Sabah, Malaysia to have design solutions for flexible pavement failures. Field tests were conducted to examine the subgrade strength of existing roads in Sarawak at various failure locations, to assess the impact of subgrade strength on pavement failures. Research outcomes from field condition assessment and subgrade testing showed that the critical causes of pavement failures are inadequate design and maintenance of drainage system and shoulder cross fall, along with inadequate pavement thickness provided by may be assuming the conservative value of soil strength at optimum moisture content, whereas the exiting and expected subgrade strengths at equilibrium moisture content are far below. Our further research shows that stabilized existing recycled asphalt and base materials to use as a sub-base along with bitumen stabilized open graded base in the pavement composition may be a viable solution for pavement failures.

Measurement, Construction, and Maintenance of Skid-Resistant Airport Pavement Surfaces

DOT National Transportation Integrated Search

1997-03-18

This advisory circular (AC) contains guidelines and procedures for the design : and construction of skid-resistant pavement, pavement evaluation with friction : measuring equipment, and maintenance of high skid-resistant pavements. 45p.

Evaluation of MDOT's Distress Thresholds for Maintained Pavement Projects

DOT National Transportation Integrated Search

2012-07-30

As an alternative to traditional contracting, pavement warranty has been adopted in Mississippi since 2000, aimed to : enhance pavement performance and protect the investment in pavement construction. Currently, a manual distress survey : method and ...

Analyses Relating to Pavement Material Characterizations and Their Effects......

DOT National Transportation Integrated Search

1998-01-01

This report presents the analysis conducted on relating pavement performance or response measures and design considerations to specific pavement layers utilizing data contained in the Long Term Pavement Performance Program National Information Manage...

Prestressed pavement rehabilitation.

DOT National Transportation Integrated Search

2009-06-23

In 1989, a landmark pavement project was opened to traffic in Blair County, Pennsylvania, that received national attention. The pavement was a two-mile section of prestressed concrete pavement that was constructed on the northbound lanes of what is n...

Analysis of Cracking in Jointed Plain Concrete Pavements

DOT National Transportation Integrated Search

2017-03-01

This paper investigates the trends of longitudinal and transverse cracking in jointed concrete pavements based on Long-Term Pavement Performance (LTPP) Program Strategic Study of Structural Factors for Rigid Pavements (SPS-2) data. The impacts of sla...

Best practices for architectural pavement treatments : final report.

DOT National Transportation Integrated Search

2010-03-01

Architectural Pavement Treatments are special treatments applied to pavements to enhance the aesthetic : character of the pavement and the surrounding environs in which they are applied. They achieve this objective : by imparting special colors and/o...

Pavement condition model based on automated pavement distress surveys.

DOT National Transportation Integrated Search

2014-05-01

Many government agencies and private consulting companies must deal with the issue of : pavement maintenance. The ability to maintain an in-service pavement structure in : acceptable condition from structural and functional points of view is related ...

Pavement profile viewer and analyzer : product brief.

DOT National Transportation Integrated Search

2003-06-01

Pavement Profile Viewer and Analyzer, or ProVAL, is a software package that imports, displays, and analyzes the characteristics of pavement profiles from many different sources. ProVAL can analyze pavement profiles using several methods, including In...

Existing pavement input information for the mechanistic-empirical pavement design guide.

DOT National Transportation Integrated Search

2009-02-01

The objective of this study is to systematically evaluate the Iowa Department of Transportations (DOTs) existing Pavement Management Information System (PMIS) with respect to the input information required for Mechanistic-Empirical Pavement Des...

The Rigid Pavement Database: Overview and Data Collection Plan

DOT National Transportation Integrated Search

1998-06-01

The rigid pavement (RP) database contains historical distress data obtained from more than 400 continuously reinforced concrete pavements(CRCP) and jointed concrete pavements (JCP) across the state of Texas. Data collection efforts began in 1974 and ...

A guide for local agency pavement managers

DOT National Transportation Integrated Search

1994-12-01

The purpose of this guide is to provide Washington's local agencies with a practical document that will assist pavement managers in understanding the pavement management process and the steps necessary to implement their own pavement management syste...

Composite pavement systems : synthesis of design and construction practices.

DOT National Transportation Integrated Search

2008-01-01

Composite pavement systems have shown the potential for becoming a cost-effective pavement alternative for highways with high and heavy traffic volumes, especially in Europe. This study investigated the design and performance of composite pavement st...

Long-Term Pavement Performance Program falling weight deflectometer maintenance manual

DOT National Transportation Integrated Search

2006-12-01

The Federal Highway Administrations (FHWA) Long-Term Pavement Performance (LTPP) program operates eight Dynatest Model 8000 FWDs to collect deflection data on in-service pavement test sections across North America. LTPP has collected pavement defl...

Study on the Vehicle Dynamic Load Considering the Vehicle-Pavement Coupled Effect

NASA Astrophysics Data System (ADS)

Xu, H. L.; He, L.; An, D.

2017-11-01

The vibration of vehicle-pavement interaction system is sophisticated random vibration process and the vehicle-pavement coupled effect was not considered in the previous study. A new linear elastic model of the vehicle-pavement coupled system was established in the paper. The new model was verified with field measurement which could reflect the real vibration between vehicle and pavement. Using the new model, the study on the vehicle dynamic load considering the vehicle-pavement coupled effect showed that random forces (centralization) between vehicle and pavement were influenced largely by vehicle-pavement coupled effect. Numerical calculation indicated that the maximum of random forces in coupled model was 2.4 times than that in uncoupled model. Inquiring the reason, it was found that the main vibration frequency of the vehicle non-suspension system was similar with that of the vehicle suspension system in the coupled model and the resonance vibration lead to vehicle dynamic load increase significantly.

Quantitative analysis of microtubule orientation in interdigitated leaf pavement cells

PubMed Central

Akita, Kae; Higaki, Takumi; Kutsuna, Natsumaro; Hasezawa, Seiichiro

2015-01-01

Leaf pavement cells are shaped like a jigsaw puzzle in most dicotyledon species. Molecular genetic studies have identified several genes required for pavement cells morphogenesis and proposed that microtubules play crucial roles in the interdigitation of pavement cells. In this study, we performed quantitative analysis of cortical microtubule orientation in leaf pavement cells in Arabidopsis thaliana. We captured confocal images of cortical microtubules in cotyledon leaf epidermis expressing GFP-tubulinβ and quantitatively evaluated the microtubule orientations relative to the pavement cell growth axis using original image processing techniques. Our results showed that microtubules kept parallel orientations to the growth axis during pavement cell growth. In addition, we showed that immersion treatment of seed cotyledons in solutions containing tubulin polymerization and depolymerization inhibitors decreased pavement cell complexity. Treatment with oryzalin and colchicine inhibited the symmetric division of guard mother cells. PMID:26039484

Full-Scale Accelerated Testing of Multi-axial Geogrid Stabilized Flexible Pavements

DTIC Science & Technology

2017-06-01

costs and reduced budgets, transportation officials are often tasked with applying innovative solutions to pavement design and construction projects... pavement designers . 1.2 Objective The objective of this effort was to construct and traffic full-scale flexible pavement sections to provide...Development Center (ERDC) constructed the full-scale test section as designed by Tensar under shelter in its Hangar 2 Pavement Test Facility. During

Texas flexible pavements overlays : review and analysis of existing databases.

DOT National Transportation Integrated Search

2011-12-01

Proper calibration of pavement design and rehabilitation performance models to : conditions in Texas is essential for cost-effective flexible pavement design. The degree of : excellence with which TxDOTs pavement design models is calibrated will d...

Development of measures to improve field performance of retroreflective raised pavement markers.

DOT National Transportation Integrated Search

2009-02-01

Retroreflective raised pavement markers (RRPMs) are routinely used in Texas to supplement highway : pavement markings. In recent years, problems of marker failure such as poor retention on pavements, : physical damage, and loss of retroreflectivity a...

Multi-resolution information mining and a computer vision approach to pavement condition distress analysis.

DOT National Transportation Integrated Search

2014-07-01

Pavement Condition surveys are carried out periodically to gather information on pavement distresses that will guide decision-making for maintenance and preservation. Traditional methods involve manual pavement inspections which are time-consuming : ...

Evaluation of MDOT's Distress Thresholds for Maintained June 30, 2012 Pavement Projects

DOT National Transportation Integrated Search

2012-05-30

As an alternative to traditional contracting, pavement warranty has been adopted in Mississippi since 2000, aimed to : enhance pavement performance and protect the investment in pavement construction. Currently, a manual distress survey : method and ...

Predicting pavement condition index using international roughness index in Washington DC.

DOT National Transportation Integrated Search

2014-09-01

A number of pavement condition indices are used to conduct pavement management assessments, two of which are the : International Roughness Index (IRI) and Pavement Condition Index (PCI). The IRI is typically measured using specialized : equipment tha...

Pavement Recycling Guidelines for State and Local Governments: Participant's Reference Book

DOT National Transportation Integrated Search

1998-03-01

Recycling or reuse of existing asphalt pavement materials to produce new pavement materials has the following advantages: (a) reduce costs of construction, (b) conservation of aggregate and binder, (c) preservation of the existing pavement geometrics...

Comparison of winter temperature profiles in asphalt and concrete pavements.

DOT National Transportation Integrated Search

2014-06-01

The objectives of this research were to 1) determine which pavement type, asphalt or concrete, has : higher surface temperatures in winter and 2) compare the subsurface temperatures under asphalt and : concrete pavements to determine the pavement typ...

Pavement testing facility : effects of tire pressure on flexible pavement response performance

DOT National Transportation Integrated Search

1989-08-01

The effects of tire pressure on flexible pavement response and performance were evaluated using data from the first phase of research at the Federal Highway Administration's Pavement Testing Facility. The Accelerated Loading Facility testing machine ...

Evaluation of Long-Life Concrete Pavement Practices for Use in Florida

DOT National Transportation Integrated Search

2012-11-01

Current Florida construction practices produce asphalt pavements with a service life of 12 to 20 years before needing rehabilitation; concrete pavements are typically designed for 20 years. However, pavements with much longer design lives are possibl...

23 CFR 500.106 - PMS.

Code of Federal Regulations, 2010 CFR

2010-04-01

... process that provides information for use in implementing cost-effective pavement reconstruction, rehabilitation, and preventative maintenance programs and that results in pavements designed to accommodate... the “AASHTO Guidelines for Pavement Management Systems.” 1 1 AASHTO Guidelines for Pavement Management...

23 CFR 500.106 - PMS.

Code of Federal Regulations, 2012 CFR

2012-04-01

... process that provides information for use in implementing cost-effective pavement reconstruction, rehabilitation, and preventative maintenance programs and that results in pavements designed to accommodate... the “AASHTO Guidelines for Pavement Management Systems.” 1 1 AASHTO Guidelines for Pavement Management...

23 CFR 500.106 - PMS.

Code of Federal Regulations, 2014 CFR

2014-04-01

... process that provides information for use in implementing cost-effective pavement reconstruction, rehabilitation, and preventative maintenance programs and that results in pavements designed to accommodate... the “AASHTO Guidelines for Pavement Management Systems.” 1 1 AASHTO Guidelines for Pavement Management...

23 CFR 500.106 - PMS.

Code of Federal Regulations, 2011 CFR

2011-04-01

... process that provides information for use in implementing cost-effective pavement reconstruction, rehabilitation, and preventative maintenance programs and that results in pavements designed to accommodate... the “AASHTO Guidelines for Pavement Management Systems.” 1 1 AASHTO Guidelines for Pavement Management...

Characterization of material properties for mechanistic-empirical pavement design in Wyoming : final report.

DOT National Transportation Integrated Search

2016-12-01

The Wyoming Department of Transportation (WYDOT) recently transitioned from the empirical AASHTO Design for Design of Pavement Structures to the Mechanistic Empirical Pavement Design Guide (MEPDG) as their standard pavement design procedure. A compre...

Pavement thickness design for local roads in Iowa.

DOT National Transportation Integrated Search

2010-02-01

Three pavement design software packages were compared with regards to how they were different in determining design input parameters and their influences on the pavement thickness. StreetPave designs the concrete pavement thickness based on the PCA m...

23 CFR 500.106 - PMS.

Code of Federal Regulations, 2013 CFR

2013-04-01

... process that provides information for use in implementing cost-effective pavement reconstruction, rehabilitation, and preventative maintenance programs and that results in pavements designed to accommodate... the “AASHTO Guidelines for Pavement Management Systems.” 1 1 AASHTO Guidelines for Pavement Management...

On-board sound intensity tire-pavement noise study in North Carolina.

DOT National Transportation Integrated Search

2011-12-01

"This research investigated tire-pavement noise on various types of pavements across North Carolina by using On- : Board Sound Intensity (OBSI) method. To mitigate traffic noise, quieter pavement may provide advantages that : noise barriers cannot. T...

An overview of joint deterioration in concrete pavement : mechanisms, solution properties, and sealers.

DOT National Transportation Integrated Search

2013-01-01

Concrete pavements represent a large portion of the transportation : infrastructure. While the vast majority of concrete pavements : provide excellent long-term performance, a portion of these : pavements have recently shown premature joint deteriora...

Identification of pavement distress in Kentucky.

DOT National Transportation Integrated Search

2006-04-01

In Kentucky, the roads are comprised primarily of two types of pavement. The first being Portland Cement Concrete (PCC) a rigid pavement, and the other is Asphaltic Concrete (AC), a flexible pavement. There is a noticeable difference in their appeara...

Pavement sound absorption measurements in the U.S.

DOT National Transportation Integrated Search

2012-08-19

In the U.S., the topic of pavement sound absorption in regard to tire-pavement noise has shown increased interest and research over the last several years. Four types of pavement sound absorption measurements with various applications are discussed: ...

Local agency pavement marking plan : final report, July 2010.

DOT National Transportation Integrated Search

2010-07-01

The proposed FHWA amendments to the MUTCD will change the way local agencies manage their pavement markings and places a : focus on pavement marking quality and management methods. This research effort demonstrates how a pavement marking maintenance ...

Evaluation of full depth asphaltic concrete pavements : final report.

DOT National Transportation Integrated Search

1982-10-01

the aim of this study was to evaluate the full depth asphaltic concrete pavement design concept by observing the performance characteristics of two 13-inch pavements constructed in 1970. Pavement performance measurements, over an 11-year period, incl...

Seasonal variations in the moduli of unbound pavement layers.

DOT National Transportation Integrated Search

2006-07-01

The in situ moduli of unbound pavement materials vary on a seasonal basis as a function of temperature and moisture conditions. : Knowledge of these variations is required for accurate prediction of pavement life for pavement design and other pavemen...

Summary of research on snowplowable raised pavement markers and recommendations for placing markers.

DOT National Transportation Integrated Search

1980-01-01

Reduced visibility on the highway due to darkness and adverse weather conditions results in an inability of motorists to readily observe pavement markings. Because raised pavement markers provide increased pavement and roadway delineation, the feasib...

Evaluation of Long-Life Concrete Pavement Practices for Use in Florida : [Summary

DOT National Transportation Integrated Search

2012-01-01

Current Florida construction practices produce asphalt pavements with a service life of 12 to 20 years before needing rehabilitation; concrete pavements are typically designed for 20 years. However, pavements with much longer design lives are possibl...

Feasibility of reclaimed asphalt pavement as aggregate in portland cement concrete pavements.

DOT National Transportation Integrated Search

2013-11-01

This research effort was focused on evaluating the feasibility of using minimally processed reclaimed : asphalt pavement (RAP) as aggregate replacement in concrete pavements. This research demonstrated : that concretes with up to 50 percent of the fi...

Performance determination of precast concrete slabs used for the repair of rigid pavements.

DOT National Transportation Integrated Search

2014-10-01

The safety of civilians is of paramount importance during the construction and repair of concrete pavements. : A complete understanding of the pavement distresses that compromise the structural stability and performance : of rigid pavements are requi...

Verification of mechanistic-empirical design models for flexible pavements through accelerated pavement testing : technical summary.

DOT National Transportation Integrated Search

2014-08-01

Midwest States Accelerated Pavement Testing Pooled-Fund Program, financed by the : highway departments of Kansas, Iowa, and Missouri, has supported an accelerated : pavement testing (APT) project to validate several models incorporated in the NCHRP :...

Developing a network-level structural capacity index for structural evaluation of pavements.

DOT National Transportation Integrated Search

2013-03-01

The objective of this project was to develop a structural index for use in network-level pavement evaluation to facilitate : the inclusion of the pavements structural condition in pavement management applications. The primary goal of network-level...

Determination of coefficient of thermal expansion effects on Louisiana's PCC pavement design.

DOT National Transportation Integrated Search

2011-12-01

With the development of the Mechanistic Empirical Pavement Design Guide (MEPDG) as a new pavement design tool, the : coefficient of thermal expansion (CTE) is now considered a more important design parameter in estimating pavement : performance inclu...

Investigation of pavement permeability : Old Bridge Road.

DOT National Transportation Integrated Search

2001-01-01

Several instances of wet pavement and pavement icing on Old Bridge Road were reported to VDOT's Lake Ridge Area Headquarters when no new precipitation had fallen. The pavement structure appears to hold water. This water seeps to the surface at a numb...

Evaluation and analysis of LTPP pavement layer thickness data

DOT National Transportation Integrated Search

2002-07-30

In 2001, the Federal Highway Administration sponsored a study to review pavement layer thickness data for Long Term Pavement Performance (LTPP) sites. The main objective of the study was to assess the quality and completeness of pavement layering inf...

Enhancing GDOT's Computerized Pavement Condition Evaluation System for Pavement Condition Survey

DOT National Transportation Integrated Search

2017-09-01

The Computerized Pavement Condition Evaluation System (COPACES) is a software tool that has been used by the Georgia Department of Transportation (GDOT) for its statewide pavement condition survey since the late 1990s. The previous version was releas...

Development of local calibration factors and design criteria values for mechanistic-empirical pavement design.

DOT National Transportation Integrated Search

2015-08-01

A mechanistic-empirical (ME) pavement design procedure allows for analyzing and selecting pavement structures based : on predicted distress progression resulting from stresses and strains within the pavement over its design life. The Virginia : Depar...

77 FR 49852 - Notice of Passenger Facility Charge (PFC) Approvals and Disapprovals

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-17

... of Projects Approved for Collection and Use: Runway 11/29 pavement rehabilitation. Taxiway B pavement rehabilitation. Runway 15/33 pavement rehabilitation. Aircraft rescue and firefighting equipment acquisition. Security enhancements. Rehabilitate concrete commercial apron. General aviation apron pavement...

Monitoring and modeling of pavement response and performance task B : New York, executive summary report.

DOT National Transportation Integrated Search

2012-01-01

Problem: Perpetual asphalt concrete (AC) and long-lasting : Portland cement concrete (PCC) pavements are relatively : new to the pavement community. These newer pavements : require the use of innovative Mechanistic-Empirical (ME) : design procedures,...

Local calibration of the MEPDG for flexible pavement design.

DOT National Transportation Integrated Search

2011-10-01

In an effort to move toward pavement designs that employ mechanistic principles, the AASHTO Joint : Task Force on Pavements initiated an effort in 1996 to develop an improved pavement design guide. The : project called for the development of a design...

Development of Alabama traffic factors for use in mechanistic-empirical pavement design.

DOT National Transportation Integrated Search

2015-02-01

The pavement engineering community is moving toward design practices that use mechanistic-empirical (M-E) approaches to the design and analysis of pavement structures. This effort is : embodied in the Mechanistic-Empirical Pavement Design Guide (MEPD...

Sealants and cold regions pavement seals : a review

DOT National Transportation Integrated Search

1995-05-01

A pavement joint seal prevents the passage of liquids into the pavement base and the intrusion of solids into the joint. The primary mechanical requirements of a pavement seal are that it respond elastically or viscoelastically to any movement of the...

Asphalt surface treatment practice in southeastern United States : [tech summary].

DOT National Transportation Integrated Search

2014-09-01

Pavement preservation is an approach in enhancing pavement performance using a set of practices that extends the life : of the pavement and improves safety and ride quality. According to the World Banks Pavement Deterioration Model, the : cost of ...

Verification of mechanistic-empirical design models for flexible pavements through accelerated pavement testing.

DOT National Transportation Integrated Search

2014-08-01

The Midwest States Accelerated Pavement Testing Pooled Fund Program, financed by the highway : departments of Kansas, Iowa, and Missouri, has supported an accelerated pavement testing (APT) project to : validate several models incorporated in the NCH...

Optimal Maintenance Works for the Aborshada Road in the Western Region of Libya

NASA Astrophysics Data System (ADS)

Youssef, Medhat Abdelrahman; Elbasher, Abdelbary Altayb

2014-09-01

In this research, the condition of a road pavement was investigated for the Aborshada Road in the Gharian region of Libya to determine the optimal maintenance works. Previously, a simple engineering judgment was the only procedure followed by the Gharian municipal engineers for evaluating pavements and prioritizing maintenance. The surface condition of the Aborshada Road pavement was investigated using "the Pavement Condition Index (PCI)" visual technique. The pavement was inspected to survey the different distresses in each sample unit. Ninteen pavement distresses were classified according to the PCI standards (PCI for roads and parking lots became an ASTM standard in 2007 (D6433-07)). It was necessary to know the most common distresses of the Aborshada Road to provide assistance for the decision maker in his evaluation of the pavement and the optimum repair method to be selected. This study reveals the actual performance of the pavements and suggests the research required for dealing with the pavement maintenance problem in Libya, especially in the western region. The best maintenance alternative for Aborshada Road was Case No. 3 (Potholes, Long. & Trans. Cracking and Alligator Crack Maintenance). Also, the most common pavement distresses on the Aborshada Road were Distress Nos. 1, 3, 6, 7, 10 and 13 according to the ASTM - D6433-07 classification

Study of Georgia's pavement deterioration/life and potential risks of delayed pavement resurfacing and rehabilitation.

DOT National Transportation Integrated Search

2016-08-01

Georgia has continuously been rated as one of the states with the smoothest pavements in the United States because the Georgia Department of Transportation (GDOT) has established a standardized pavement condition evaluation system (PACES) for consist...

Performance of rehabilitated asphalt concrete pavements in LTPP experiments (data collected through February 1997).

DOT National Transportation Integrated Search

2000-06-01

Two experiments are included within the Long Term Pavement Performance (LTPP) program to provide data on the performance of : rehabilitated asphalt concrete (AC) pavements. These two experiments include Specific Pavement Studies No. 5 (SPS-5) and Gen...

Evaluation of crack-sealing milled pavement in the effort to reduce transverse cracking.

DOT National Transportation Integrated Search

2015-01-01

To determine if crack sealing milled pavement prior to overlay will deter the : migration of transverse cracking, or have an effect on pavement performance, : when compared to an adjacent milled pavement that receives no crack sealing : treatment.

Effect of Michigan multi-axle trucks on pavement distress and profile: executive summary.

DOT National Transportation Integrated Search

2009-02-01

Truck traffic is a major factor in pavement design because truck loads are the primary cause of : pavement distresses. Trucks have different axle configurations that cause different levels of : pavement damage. The American Association of State Highw...

Colorado Department of Transportation hot-mix asphalt crack sealing and filling best practices guidelines.

DOT National Transportation Integrated Search

2014-10-01

Crack sealing and filling on hot mix asphalt (HMA) pavements are cost-effective pavement preservation techniques that improve pavement performance and : extend the life of existing pavements. If performed in a timely and effective manner, crack seali...

Future design of perpetual pavements for New Mexico.

DOT National Transportation Integrated Search

2009-12-29

This study provides guidance for future designs of perpetual pavements in New Mexico. The perpetual pavement in this study refers to only hot mix asphalt (HMA) pavement sections designed for a useful life of 50 years or more without having major dist...

Determination of coefficient of thermal expansion for Portland Cement Concrete pavements for MEPDG Implementation

DOT National Transportation Integrated Search

2012-10-01

The Coefficient of Thermal Expansion (CTE) is an important parameter in Portland Cement Concrete (PCC) pavement analysis and design as it is directly proportional to the magnitude of temperature-related pavement deformations throughout the pavement s...

Determination of coefficient of thermal expansion For Portland Cement Concrete pavements for MEPDG Implementation

DOT National Transportation Integrated Search

2012-10-01

The Coefficient of Thermal Expansion (CTE) is an important parameter in Portland Cement Concrete (PCC) pavement analysis and design as it is directly proportional to the magnitude of temperature-related pavement deformations throughout the pavement s...

Laboratory data to determine impact of coarse aggregate type and cementitious materials on design thickness of PCC pavements.

DOT National Transportation Integrated Search

2016-12-01

The Mississippi Department of Transportation (MDOT) needed mechanical and volume change properties of portland cement concrete (PCC) pavement in order to implement pavement thickness design procedures of the Mechanistic-Empirical Pavement Design Guid...

Layer moduli of Nebraska pavements for the new Mechanistic-Empirical Pavement Design Guide (MEPDG).

DOT National Transportation Integrated Search

2010-12-01

As a step-wise implementation effort of the Mechanistic-Empirical Pavement Design Guide (MEPDG) for the design : and analysis of Nebraska flexible pavement systems, this research developed a database of layer moduli dynamic : modulus, creep compl...

MoDOT pavement preservation research program volume IV, pavement evaluation tools-data collection methods.

DOT National Transportation Integrated Search

2015-10-01

The overarching goal of the MoDOT Pavement Preservation Research Program, Task 3: Pavement Evaluation Tools Data : Collection Methods was to identify and evaluate methods to rapidly obtain network-level and project-level information relevant to :...

Evaluation of experimental flexible pavements : interim report no. 1, construction of Altavista Bypass experimental pavement.

DOT National Transportation Integrated Search

1974-01-01

Deflection tests conducted during the construction and shortly after the completion of a large experimental pavement project are reported. Four different pavement designs, as follows, are compared: 1. 6-inch cement stabilized subgrade, 6-inch crushed...

Application of empirical and mechanistic-empirical pavement design procedures to Mn/ROAD concrete pavement test sections

DOT National Transportation Integrated Search

1997-05-01

Current pavement design procedures are based principally on empirical approaches. The current trend toward developing more mechanistic-empirical type pavement design methods led Minnesota to develop the Minnesota Road Research Project (Mn/ROAD), a lo...

Field investigation of high performance pavements in Virginia.

DOT National Transportation Integrated Search

2005-01-01

This study evaluated 18 pavement sections located in high-traffic highways in Virginia to find a premium pavement design with a life span of 40 years or more using current and past field experience. The selected pavement sections were thought to perf...

Effect of environmental factors on pavement deterioration : Final report, Volume II of II

DOT National Transportation Integrated Search

1988-11-01

A computerized model for the determination of pavement deterioration responsibilities due to load and non-load related factors was developed. The model is based on predicted pavement performance and the relationship of pavement performance to a quant...

Effect of environmental factors on pavement deterioration : Final report, Volume I of II.

DOT National Transportation Integrated Search

1988-11-01

A computerized model for the determination of pavement deterioration responsibilities due to load and non-load related factors was developed. The model is based on predicted pavement performance and the relationship of pavement performance to a quant...

Molecular mechanisms controlling pavement cell shape in Arabidopsis leaves.

PubMed

Qian, Pingping; Hou, Suiwen; Guo, Guangqin

2009-08-01

Pavement cells have an interlocking jigsaw puzzle-shaped leaf surface pattern. Twenty-three genes involved in the pavement cell morphogenesis were discovered until now. The mutations of these genes through various means lead to pavement cell shape defects, such as loss or lack of interdigitation, the reduction of lobing, gaps between lobe and neck regions in pavement cells, and distorted trichomes. These phenotypes are affected by the organization of microtubules and microfilaments. Microtubule bands are considered corresponding with the neck regions of the cell, while lobe formation depends on patches of microfilaments. The pathway of Rho of plant (ROP) GTPase signaling cascades regulates overall activity of the cytoskeleton in pavement cells. Some other proteins, in addition to the ROPs, SCAR/WAVE, and ARP2/3 complexes, are also involved in the pavement cell morphogenesis.

Assessing the role of pavement macrotexture in preventing crashes on highways.

PubMed

Pulugurtha, Srinivas S; Kusam, Prasanna R; Patel, Kuvleshay J

2010-02-01

The objective of this article is to assess the role of pavement macrotexture in preventing crashes on highways in the State of North Carolina. Laser profilometer data obtained from the North Carolina Department of Transportation (NCDOT) for highways comprising four corridors are processed to calculate pavement macrotexture at 100-m (approximately 330-ft) sections according to the American Society for Testing and Materials (ASTM) standards. Crash data collected over the same lengths of the corridors were integrated with the calculated pavement macrotexture for each section. Scatterplots were generated to assess the role of pavement macrotexture on crashes and logarithm of crashes. Regression analyses were conducted by considering predictor variables such as million vehicle miles of travel (as a function of traffic volume and length), the number of interchanges, the number of at-grade intersections, the number of grade-separated interchanges, and the number of bridges, culverts, and overhead signs along with pavement macrotexture to study the statistical significance of relationship between pavement macrotexture and crashes (both linear and log-linear) when compared to other predictor variables. Scatterplots and regression analysis conducted indicate a more statistically significant relationship between pavement macrotexture and logarithm of crashes than between pavement macrotexture and crashes. The coefficient for pavement macrotexture, in general, is negative, indicating that the number of crashes or logarithm of crashes decreases as it increases. The relation between pavement macrotexture and logarithm of crashes is generally stronger than between most other predictor variables and crashes or logarithm of crashes. Based on results obtained, it can be concluded that maintaining pavement macrotexture greater than or equal to 1.524 mm (0.06 in.) as a threshold limit would possibly reduce crashes and provide safe transportation to road users on highways.

Experimental studies of the dilution of vehicle exhaust pollutants by environment-protecting pervious pavement.

PubMed

Liu, Chung-Ming; Chen, Jui-Wen; Tsai, Jen-Hui; Lin, Wei-Shian; Yen, M-T; Chen, Ting-Hao

2012-01-01

This study determines whether environment-protecting pervious pavement can dilute pollutants immediately after emissions from vehicle. The turbulence-driven dry-deposition process is too slow to be considered in this aspect. The pavement used is the JW pavement (according to its inventors name), a high-load-bearing water-permeable pavement with patents in over 100 countries, which has already been used for more than 8 years in Taiwan and is well suited to replacing conventional road pavement, making the potential implementation of the study results feasible. The design of this study included two sets of experiments. Variation of the air pollutant concentrations within a fenced area over the JW pavement with one vehicle discharging emissions into was monitored and compared with results over a non-JW pavement. The ambient wind speed was low during the first experiment, and the results obtained were highly credible. It was found that the JW pavement diluted vehicle pollutant emissions near the ground surface by 40%-87% within 5 min of emission; whereas the data at 2 m height suggested that about 58%-97% of pollutants were trapped underneath the pavement 20 min after emission. Those quantitative estimations may be off by +/- 10%, if errors in emissions and measurements were considered. SO2 and CO2 underwent the most significant reduction. Very likely, pollutants were forced to move underneath due to the special design of the pavement. During the second experiment, ambient wind speeds were high and the results obtained had less credibility, but they did not disprove the pollutant dilution capacity of the JW pavement. In order to track the fate of pollutants, parts of the pavement were removed to reveal a micro version of wetland underneath, which could possibly hold the responsibility of absorbing and decomposing pollutants to forms harmless to the environment and human health.

Usage of digital image correlation in assessment of behavior of block element pavement structure

NASA Astrophysics Data System (ADS)

Grygierek, M.; Grzesik, B.; Rokitowski, P.; Rusin, T.

2018-05-01

In diagnostics of existing road pavement structures deflection measurements have fundamental meaning, because of ability to assess present stiffness (bearing capacity) of whole layered construction. During test loading the reaction of pavement structure to applied load is measured in central point or in a few points located along a straight on a 1.5 ÷ 1.8 m distance (i.e. Falling Weight Deflectometer) in similar spacing equal to 20 ÷ 30 cm. Typical measuring techniques are productive and precise enough for most common pavement structures such as flexible, semi-rigid and rigid. It should be noted that in experimental research as well as in pavements in complex stress state, measurement techniques allowing observation of pavement deformation in 3D would have been very helpful. A great example of that type of pavements is a block element pavement structure consisting of i.e. paving blocks or stone slabs. Due to high stiffness and confined ability of cooperation of surrounding block elements, in that type of pavements fatigue life is strongly connected with displacement distribution. Unfortunately, typical deflection measurement methods forefend displacement observations and rotation of single block elements like paving blocks or slabs. Another difficult problem is to carry out unmistakable analysis of cooperation between neighboring elements. For more precise observations of displacements state of block element pavements under a wheel load a Digital Image Correlation (DIC) was used. Application of this method for assessment of behavior of stone slabs pavement under a traffic load enabled the monitoring of deformations distribution and encouraged to formulate conclusions about the initiation mechanism and development of damages in this type of pavement structures. Results shown in this article were obtained in field tests executed on an exploited pavement structure with a surface course made of granite slabs with dimensions 0.5x1.0x0.14 m.

The Tire Noise Performance of Nevada Highway Pavements: On-Board Sound Intensity (OBSI) Measurement

DOT National Transportation Integrated Search

2008-06-01

On Board Sound Intensity measurements were conducted on freeway segments in the vicinity of Las Vegas and Reno, Nevada in an effort to document the tire-pavement noise levels of existing pavements. Tested pavements included Portland Cement Concrete (...

Sawing and sealing joints in bituminous pavements to control cracking

DOT National Transportation Integrated Search

1996-03-01

The practice of sawing and sealing joints in pavements is not a new one. In fact, it is common practice in the construction of jointed Portland Cement Concrete (PCC) pavements. The idea of sawing and sealing joints in bituminous pavements is much les...

Long-Term Pavement Performance Ohio SPS-1 and SPS-2 Dynamic Load Response Data Processing

DOT National Transportation Integrated Search

2015-03-01

The dynamic load response (DLR) Study Team reinterpreted 4,290 Ohio Specific Pavement Studies (SPS)-1 (asphalt concrete pavements) raw traces and 9,240 Ohio SPS-2 (portland cement concrete pavements) raw traces, correcting the data issues identified ...

Improved guidance for users of the 1993 AASHTO flexible pavement design procedures : LTPP TechBrief

DOT National Transportation Integrated Search

1997-08-01

A key design challenge faced by engineers using the 1993 AASHTO Guide for Design of Pavement Structures (AASHTO Guide) is the determination of appropriate design parameters for the subgrade and pavement materials. The Long-Term Pavement Performance (...

Travel better, travel longer : a pocket guide to improve traffic control and mobility for our older population

DOT National Transportation Integrated Search

1995-02-01

Pavement related effects of changes in truck size and weight regulations include the following: (1) Increased traffic loadings require thicker pavements which, in turn, increase the construction cost of pavements. (2) For existing pavements, increase...

Study of Georgia's pavement deterioration/life and potential risks of delayed pavement resurfacing and rehabilitation : final report.

DOT National Transportation Integrated Search

2016-08-01

Georgia has continuously been rated as one of the states with the smoothest pavements in the United States because the Georgia Department of Transportation (GDOT) has established a standardized pavement condition evaluation system (PACES) for consist...

Study of Georgia's pavement deterioration/life and potential risks of delayed pavement resurfacing and rehabilitation : final report.

DOT National Transportation Integrated Search

2016-08-01

Georgia has continuously been rated as one of the states with the smoothest pavements in the United States : because the Georgia Department of Transportation (GDOT) has established a standardized pavement condition : evaluation system (PACES) for con...

An assessment of the feasibility of developing and implementing an automated pavement distress survey system incorporating digital image processing.

DOT National Transportation Integrated Search

1997-01-01

The rational allocation of pavement maintenance resources requires the periodic assessment of the condition of all pavements. Traditional manual pavement distress surveys, which are based on visual inspection, are labor intensive, slow, and expensive...

Feasibility of reclaimed asphalt pavement as aggregate in portland cement concrete pavement, phase II : field demonstration.

DOT National Transportation Integrated Search

2015-10-01

This research was focused on evaluating the feasibility of using minimally processed reclaimed asphalt pavement (RAP) as : aggregate replacement in concrete pavements. An initial phase of research demonstrated that concretes with up to 50 percent : o...

Evaluation of the MIT-Scan-T2 for non-destructive PCC pavement thickness determination.

DOT National Transportation Integrated Search

2008-07-01

The MIT-Scan-T2 device is marketed as a non-destructive way to determine pavement thickness on both : HMA and PCC pavements. PCC pavement thickness determination is an important incentivedisincentive : measurement for the Iowa DOT and contractors. Th...

Evaluation of various hot mix asphalt pavement thicknesses over rubblized concrete pavement.

DOT National Transportation Integrated Search

2011-07-01

In 1999, the Wisconsin DOT constructed two test sections as part of a rubblized PCC pavement project on I-39 to evaluate whether : increased HMA thickness could extend the pavement system's service life. Design thicknesses of the control and test sec...

Performance of warranted asphalt pavements : smoothness and performance of Indiana warranted asphalt pavements.

DOT National Transportation Integrated Search

2016-06-01

In the early 1990s the Indiana Department of Transportation (INDOT) developed a five-year warranty specification for asphalt pavements : with the first project being built in 1996. In 2004, results indicated that the asphalt pavements built with the ...

Evaluation of portland cement concrete pavement with high slag content cement.

DOT National Transportation Integrated Search

2013-10-01

The performance of a section of concrete pavement built with 30 percent Ground Granulated Blast Furnace Slag (GGBFS) is compared to a control section of concrete pavement built with 25 percent GGBFS to determine if the higher slag content pavement is...

Integration and Evaluation of Automated Pavement Distress Data in INDOT’s Pavement Management System

DOT National Transportation Integrated Search

2017-05-01

This study was in two parts. The first part established and demonstrated a framework for pavement data integration. This is critical for fulfilling QC/QA needs of INDOTs pavement management system, because the precision of the physical location re...

Functionality Enhancement of Industrialized Optical Fiber Sensors and System Developed for Full-Scale Pavement Monitoring

PubMed Central

Wang, Huaping; Liu, Wanqiu; He, Jianping; Xing, Xiaoying; Cao, Dandan; Gao, Xipeng; Hao, Xiaowei; Cheng, Hongwei; Zhou, Zhi

2014-01-01

Pavements always play a predominant role in transportation. Health monitoring of pavements is becoming more and more significant, as frequently suffering from cracks, rutting, and slippage renders them prematurely out of service. Effective and reliable sensing elements are thus in high demand to make prognosis on the mechanical properties and occurrence of damage to pavements. Therefore, in this paper, various types of functionality enhancement of industrialized optical fiber sensors for pavement monitoring are developed, with the corresponding operational principles clarified in theory and the performance double checked by basic experiments. Furthermore, a self-healing optical fiber sensing network system is adopted to accomplish full-scale monitoring of pavements. The application of optical fiber sensors assembly and self-healing network system in pavement has been carried out to validate the feasibility. It has been proved that the research in this article provides a valuable method and meaningful guidance for the integrity monitoring of civil structures, especially pavements. PMID:24854060

New findings regarding the significance of pavement skid resistance for road safety on Swiss freeways.

PubMed

Lindenmann, H P

2006-01-01

The significance of the influence of poor pavement skid resistance values on accident frequency in wet pavement conditions has been the object of many studies over several years. The various investigations have produced very diverse findings. Only seldom, however, has detailed consideration been given to the central question of whether pavement skid resistance is a decisive parameter in the occurrence of local accident "black spots." Until now, the focus has been more on describing a relationship between pavement skid resistance and accident frequency. In the course of the network-wide survey of the states of pavements and of accident occurrence on Switzerland's freeways from 1999 to 2003, it emerged that a relationship with inadequate pavement skid resistance was provable for only a small proportion of accident black spots. These findings were used to frame a guideline for authorities and highway operators about how to treat skid resistance when assessing pavements and accident occurrence on freeways.

Effective flow resistivity of highway pavements.

PubMed

Rochat, Judith L; Read, David R

2013-12-01

In the case of highway traffic noise, propagating sound is influenced by the ground over which it travels, whether it is the pavement itself or the ground between the highway and nearby communities. Properly accounting for ground type in modeling can increase accuracy in noise impact determinations and noise abatement design. Pavement-specific effective flow resistivity values are being investigated for inclusion in the Federal Highway Administration Traffic Noise Model, which uses these values in the sound propagation algorithms and currently applies a single effective flow resistivity value to all pavement. Pavement-specific effective flow resistivity values were obtained by applying a modified version of the American National Standards Institute S1.18 standard. The data analysis process was tailored to allow for increased sensitivity and extraction of effective flow resistivity values for a broad range of pavements (sound absorptive to reflective). For porous pavements (sound absorptive), it was determined that examination of the measured data can reveal influence from an underlying structure. Use of such techniques can aid in the design of quieter pavements.

Durable high strength cement concrete topping for asphalt roads

NASA Astrophysics Data System (ADS)

Vyrozhemskyi, Valerii; Krayushkina, Kateryna; Bidnenko, Nataliia

2017-09-01

Work on improving riding qualities of pavements by means of placing a thin cement layer with high roughness and strength properties on the existing asphalt pavement were conducted in Ukraine for the first time. Such pavement is called HPCM (High Performance Cementitious Material). This is a high-strength thin cement-layer pavement of 8-9 mm thickness reinforced with metal or polymer fiber of less than 5 mm length. Increased grip properties are caused by placement of stone material of 3-5 mm fraction on the concrete surface. As a result of the research, the preparation and placement technology of high-strength cement thin-layer pavement reinforced with fiber was developed to improve friction properties of existing asphalt pavements which ensures their roughness and durability. It must be emphasized that HPCM is a fundamentally new type of thin-layer pavement in which a rigid layer of 10 mm thickness is placed on a non-rigid base thereby improving riding qualities of asphalt pavement at any season of a year.

Investigation on dynamical interaction between a heavy vehicle and road pavement

NASA Astrophysics Data System (ADS)

Yang, Shaopu; Li, Shaohua; Lu, Yongjie

2010-08-01

This paper presents a model for three-dimensional, heavy vehicle-pavement-foundation coupled system, which is modelled as a seven-DOF vehicle moving along a simply supported double-layer rectangular thin plate on a linear viscoelastic foundation. The vertical tyre force is described by a single point-contact model, while the pavement-foundation is modelled as a double-layer plate on a linear viscoelastic foundation. Using the Galerkin method and quick direct integral method, the dynamical behaviour of the vehicle-pavement-foundation coupled system is investigated numerically and compared with that of traditional vehicle system and pavement system. The effects of coupling action on vehicle body vertical acceleration, suspension deformations, tyre forces and pavement displacements are also obtained. The investigation shows that the coupling action could not be neglected even on a smooth road surface, such as highway. Thus, it is necessary to investigate the dynamics of vehicle and pavement simultaneously based on the vehicle-pavement-foundation coupled system.

Functionality enhancement of industrialized optical fiber sensors and system developed for full-scale pavement monitoring.

PubMed

Wang, Huaping; Liu, Wanqiu; He, Jianping; Xing, Xiaoying; Cao, Dandan; Gao, Xipeng; Hao, Xiaowei; Cheng, Hongwei; Zhou, Zhi

2014-05-19

Pavements always play a predominant role in transportation. Health monitoring of pavements is becoming more and more significant, as frequently suffering from cracks, rutting, and slippage renders them prematurely out of service. Effective and reliable sensing elements are thus in high demand to make prognosis on the mechanical properties and occurrence of damage to pavements. Therefore, in this paper, various types of functionality enhancement of industrialized optical fiber sensors for pavement monitoring are developed, with the corresponding operational principles clarified in theory and the performance double checked by basic experiments. Furthermore, a self-healing optical fiber sensing network system is adopted to accomplish full-scale monitoring of pavements. The application of optical fiber sensors assembly and self-healing network system in pavement has been carried out to validate the feasibility. It has been proved that the research in this article provides a valuable method and meaningful guidance for the integrity monitoring of civil structures, especially pavements.

Mechanistic interpretation of nondestructive pavement testing deflections

NASA Astrophysics Data System (ADS)

Hoffman, M. S.; Thompson, M. R.

1981-06-01

A method for the back calculation of material properties in flexible pavements based on the interpretation of surface deflection measurements is proposed. The ILLI-PAVE, a stress-dependent finite element pavement model, was used to generate data for developing algorithms and nomographs for deflection basin interpretation. Twenty four different flexible pavement sections throughout the State of Illinois were studied. Deflections were measured and loading mode effects on pavement response were investigated. The factors controlling the pavement response to different loading modes are identified and explained. Correlations between different devices are developed. The back calculated parameters derived from the proposed evaluation procedure can be used as inputs for asphalt concrete overlay design.

Study on road surface source pollution controlled by permeable pavement

NASA Astrophysics Data System (ADS)

Zheng, Chaocheng

2018-06-01

The increase of impermeable pavement in urban construction not only increases the runoff of the pavement, but also produces a large number of Non-Point Source Pollution. In the process of controlling road surface runoff by permeable pavement, a large number of particulate matter will be withheld when rainwater is being infiltrated, so as to control the source pollution at the source. In this experiment, we determined the effect of permeable road surface to remove heavy pollutants in the laboratory and discussed the related factors that affect the non-point pollution of permeable pavement, so as to provide a theoretical basis for the application of permeable pavement.

Continuously reinforced concrete pavement inventory

NASA Astrophysics Data System (ADS)

Halverson, A. D.; Hagen, M. G.

1982-09-01

A typical concrete pavement has expansion and contraction joints across and along the pavement surface. The joints allow the pavement to change in dimension with changes in temperature. A continuously reinforced concrete pavement (CRCP) does not have expansion or contraction joints. Random, closely spaced cracks are expected to develop naturally and allow for expansion and contraction due to temperature changes. The many random cracks eliminate expensive joint maintenance. This maintenance-free service life feature has not occurred in Minnesota. This CRCP inventory is a physical evaluation of the extent of corrosion on random sections of pavement. It is related to concurrent efforts which will evaluate CRCP rehabilitation techniques.

Roadmap to quieter highways

NASA Astrophysics Data System (ADS)

Corbisier, Christopher

2005-09-01

Research in Europe, as documented by an FHWA/AASHTO European Scan Tour held in May 2004, and recent activity in Arizona and California, has fostered much interest in ``quiet pavements.'' On September 14-16, 2004, an FHWA sponsored Roadmap to Quieter Highways workshop was held at Purdue University. Participants were from the disciplines of pavement, safety, and noise from FHWA, State departments of transportation, industry (paving associations, general contractors, tire, and vehicle manufacturers), and academia. After several breakout sessions in the areas of policy, construction, maintenance, analysis (measurement and prediction), research, and design, the group had identified the knowledge gaps and developed a plan to fill those gaps. Several activities have been implemented based on the Roadmap to Quieter Highways. An Expert Task Group was formed to provide a draft provisional standard for the measurement methodologies, e.g., source, wayside, pavement absorption. A Tire/Pavement 101 workshop is being developed to educate pavement practitioners in noise concepts and noise practitioners in pavement concepts. A Tire/Pavement Noise clearinghouse is being developed as a one-stop location for all current tire/pavement noise or quiet pavement activities. Several research studies have been started and a second workshop will be held in 2006 to assess progress of the Roadmap.

Mapping asphalt pavement aging and condition using multiple endmember spectral mixture analysis in Beijing, China

NASA Astrophysics Data System (ADS)

Pan, Yifan; Zhang, Xianfeng; Tian, Jie; Jin, Xu; Luo, Lun; Yang, Ke

2017-01-01

Asphalt road reflectance spectra change as pavement ages. This provides the possibility for remote sensing to be used to monitor a change in asphalt pavement conditions. However, the relatively narrow geometry of roads and the relatively coarse spatial resolution of remotely sensed imagery result in mixtures between pavement and adjacent landcovers (e.g., vegetation, buildings, and soil), increasing uncertainties in spectral analysis. To overcome this problem, multiple endmember spectral mixture analysis (MESMA) was used to map the asphalt pavement condition using Worldview-2 satellite imagery in this study. Based on extensive field investigation and in situ measurements, aged asphalt pavements were categorized into four stages-preliminarily aged, moderately aged, heavily aged, and distressed. The spectral characteristics in the first three stages were further analyzed, and a MESMA unmixing analysis was conducted to map these three kinds of pavement conditions from the Worldview-2 image. The results showed that the road pavement conditions could be detected well and mapped with an overall accuracy of 81.71% and Kappa coefficient of 0.77. Finally, a quantitative assessment of the pavement conditions for each road segment in this study area was conducted to inform road maintenance management.

Pavement temperature and burns: streets of fire.

PubMed

Harrington, W Z; Strohschein, B L; Reedy, D; Harrington, J E; Schiller, W R

1995-11-01

To measure pavement temperatures over a 24-hour period to determine when patients are at risk for burns and to report cases of pavement burns with predisposing factors. Descriptive study of pavement temperatures and retrospective case series of 23 patients with pavement burns admitted to the Maricopa Medical Center during the years 1986 to 1992. Twenty-three patients with pavement burns serious enough for them to be admitted to the burn center. We measured the temperatures of asphalt, cement, and other outdoor materials hourly for one 24-hour period using a thermocouple thermometer. Asphalt pavement was hot enough to cause burns from 9 AM to 7 PM during the summer months. It was hot enough to cause a second-degree burn within 35 seconds from 10 AM to 5 PM. The group of burned patients could be divided into three categories: incapacitated, restrained, and sensory deficient. All burns involved less than 13% of the total body surface area. During summer days in the desert, pavement is often hot enough to cause burns and does so with regularity in the southwestern United States. No one should be allowed to remain in contact with hot pavement, even transiently.

DOE Office of Scientific and Technical Information (OSTI.GOV)

G.A. Valentine; C.D. Harrington

Formation of desert pavement and accretionary soils are intimately linked in arid environments such as the Mojave Desert. Well-sorted fallout scoria lapilli at Lathrop Wells (75-80 ky) and Red Cone ({approx}1 Ma) volcanoes (southern Nevada) formed an excellent starting material for pavement, allowing infiltration of eolian silt and fine sand that first clogs the pore space of underlying tephra and then aggrades and develops vesicular A (Av) horizons. Variations in original pyroclast sizes provide insight into minimum and maximum clast sizes that promote pavement and soil formation: pavement becomes ineffective when clasts can saltate under the strongest winds, while clastsmore » larger than coarse lapilli are unable to form an interlocking pavement that promotes silt accumulation (necessary for Av development). Contrary to predictions that all pavements above altitudes of {approx}400 m would have been ''reset'' in their development after late Pleistocene vegetation advances (about 15 ka), the soils and pavements show clear differences in maturity between the two volcanoes. This indicates that either the pavement soils develop slowly over many 10,000's of years and then are very stable, or that, if they are disrupted by vegetation advances, subsequent pavements are reestablished with successively more mature characteristics.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

G.A. Valentine; C.D. Harrington

Formation of desert pavement and accretionary soils are intimately linked in arid environments such as the Mojave Desert. Well-sorted fallout scoria lapilli at Lathrop Wells (75-80 ky) and Red Cone ({approx}1 Ma) volcanoes (southern Nevada) formed an excellent starting material for pavement, allowing infiltration of eolian silt and fine sand that first clogs the pore space of underlying tephra and then aggrades and develops vesicular A (Av) horizons. Variations in original pyroclast sizes provide insight into minimum and maximum clast sizes that promote pavement and soil formation: pavement becomes ineffective when clasts can saltate under the strongest winds, while clastsmore » larger than coarse lapilli are unable to form an interlocking pavement that promotes silt accumulation (necessary for Av development). Contrary to predictions that all pavements above altitudes of {approx}400 m would have been ''reset'' in their development after late Pleistocene vegetation advances (about 15 ka), the soils and pavements show clear differences in maturity between the two volcanoes. This indicates that either the pavements/soils develop slowly over many 10,000's of years and then are very stable, or that, if they are disrupted by vegetation advances, subsequent pavements are reestablished with successively more mature characteristics.« less

Advanced Pavement Design: Finite Element Modeling for Rigid Pavement Joints, Report II: Model Development

DOT National Transportation Integrated Search

1998-03-01

The contribution of a cement-stabilized base course to the strength of the rigid pavement structure is poorly understood. The objective of this research was to obtain data on the response of the rigid pavement slab-joint-foundation system by conducti...

An integrated pavement data management and feedback system (PAMS) : evaluation of pavement condition rating procedure.

DOT National Transportation Integrated Search

1984-08-01

This report describes an evaluation of a method for use in the Highway Needs Study pavement condition rating. The methods by which the Department generates and manages pavement condition data in the overall process of providing a network of highways ...

Integration of pavement cracking prediction model with asset management and vehicle-infrastructure interaction models.

DOT National Transportation Integrated Search

2015-01-01

Not long after the construction of a pavement or a new pavement surface, various : forms of deterioration begin to accumulate due to the harsh effects of traffic loading : combined with weathering action. In a recent NEXTRANS project, a pavement crac...

Building accurate historic and future climate MEPDG input files for Louisiana DOTD : tech summary.

DOT National Transportation Integrated Search

2017-02-01

The new pavement design process (originally MEPDG, then DARWin-ME, and now Pavement ME Design) requires two types : of inputs to infl uence the prediction of pavement distress for a selected set of pavement materials and structure. One input is : tra...

76 FR 67018 - Notice to Manufacturers of Airport In-Pavement Stationary Runway Weather Information Systems

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-28

...-Pavement Stationary Runway Weather Information Systems AGENCY: Federal Aviation Administration (FAA), U.S. DOT. ACTION: Notice to Manufacturers of In-Pavement Stationary Runway Weather Information Systems... waivers to foreign manufacturers of Active or Passive In- Pavement Stationary Runway Weather Information...

Nighttime visibility of in-service pavement markings, pavement markers, and guardrail delineation in Alaska (with and without continuous lighting).

DOT National Transportation Integrated Search

2011-03-01

This research determined the visibility of in-service pavement markings along lighted and unlighted highway sections, and compared : visibility of in-service pavement markings to the FHWA proposed minimum retroreflectivity levels for the Alaska Depar...

Long-term Performance of Granular Bases Including the Effect of Wet-Dry Cycles on Inverted Base Pavement Performance

DOT National Transportation Integrated Search

2017-06-01

The main objective of this study was to advance the understanding of alternative pavement designs. In particular, potential techniques such as inverted base pavements (IBP) have increased the importance of granular aggregate bases (GAB) in pavement s...

Design and construction of PCC pavements, volume 2 : design features and practices that influence performance of pavements.

DOT National Transportation Integrated Search

1998-10-01

A study has been conducted to evaluate and analyze portland cement concrete (PCC) pavements in order to : develop recommendations for the design and construction of long-lived concrete pavements. It involved a : detailed evaluation and analysis of th...

Improved characterization of truck traffic volumes and axle loads for mechanistic-empirical pavement design : [executive summary report].

DOT National Transportation Integrated Search

2012-12-01

Traffic is one of the primary inputs in pavement design. Traditional pavement design procedures account for traffic using the equivalent single axle loads (ESALs) accumulated during the life of the pavement structure. This procedure is based on co...

Develop guidelines for pavement preservation treatments and for building a pavement preservation program platform for Alaska.

DOT National Transportation Integrated Search

2012-11-01

This reports summarizes the project findings including the following: : An evaluation of the current pavement preservation program used in Alaska and a roadmap to grow the program : A summary of the best practices in terms of pavement preserv...

Crack identification for rigid pavements using unmanned aerial vehicles

NASA Astrophysics Data System (ADS)

Bahaddin Ersoz, Ahmet; Pekcan, Onur; Teke, Turker

2017-09-01

Pavement condition assessment is an essential piece of modern pavement management systems as rehabilitation strategies are planned based upon its outcomes. For proper evaluation of existing pavements, they must be continuously and effectively monitored using practical means. Conventionally, truck-based pavement monitoring systems have been in-use in assessing the remaining life of in-service pavements. Although such systems produce accurate results, their use can be expensive and data processing can be time consuming, which make them infeasible considering the demand for quick pavement evaluation. To overcome such problems, Unmanned Aerial Vehicles (UAVs) can be used as an alternative as they are relatively cheaper and easier-to-use. In this study, we propose a UAV based pavement crack identification system for monitoring rigid pavements’ existing conditions. The system consists of recently introduced image processing algorithms used together with conventional machine learning techniques, both of which are used to perform detection of cracks on rigid pavements’ surface and their classification. Through image processing, the distinct features of labelled crack bodies are first obtained from the UAV based images and then used for training of a Support Vector Machine (SVM) model. The performance of the developed SVM model was assessed with a field study performed along a rigid pavement exposed to low traffic and serious temperature changes. Available cracks were classified using the UAV based system and obtained results indicate it ensures a good alternative solution for pavement monitoring applications.

Nature based solutions to mitigate soil sealing in urban areas: Results from a 4-year study comparing permeable, porous, and impermeable pavements.

PubMed

Fini, A; Frangi, P; Mori, J; Donzelli, D; Ferrini, F

2017-07-01

Soil sealing is one of the most pervasive forms of soil degradation that follows urbanization and, despite innovative pavements (i.e. pervious) are being installed in urban areas to mitigate it, there is little research on the effects of pervious pavements on soil water and carbon cycle and on the physiology of urban trees. The aim of this 4-year experiment was to assess the effects of three pavements, differing in permeability to water and gases, on some soil physical parameters, and on growth and physiology of newly planted Celtis australis and Fraxinus ornus. Treatments were: 1) impermeable pavement (asphalt on concrete sub-base); 2) permeable pavement (pavers on crushed rock sub-base); 3) porous design (porous pavement on crushed rock sub-base); 4) control (unpaved soil, kept free of weed by chemical control). Soil (temperature, moisture, oxygen content and CO 2 efflux) and plant (above- and below-ground growth, leaf gas exchange, chlorophyll fluorescence, water relations) parameters were measured. All types of pavements altered the water cycle compared to unpaved soil plots, but this disturbance was less intense in porous pavements than in other soil cover types. Porous pavements allowed both higher infiltration and evaporation of water than both pavers and asphalt. Reduction of evaporative cooling from soil paved with permeable and impermeable pavements contributed to significant soil warming: at 20cm depth, soils under concrete pavers and asphalt were 4 and 5°C warmer than soil covered by porous pavements and unpaved soils, respectively. Thus, enhancing evaporation from paved soil by the use of porous pavements may contribute to mitigating urban heat islands. CO 2 greatly accumulated under impermeable and permeable pavements, but not under porous pavements, which showed CO 2 efflux rates similar to control. Soil oxygen slightly decreased only beneath asphalt. Growth of newly planted C. australis and F. ornus was little affected by pavement type. Tree transpiration rapidly depleted soil moisture compared to the not-planted scenario, but soil moisture did not fall below wilting point (particularly in the deeper soil layers, i.e. 40-50cm) in any treatment. While C. australis showed similar leaf gas exchange and water relations in all treatments, F. ornus showed a depression in CO 2 assimilation and slight signs of stress of the photosynthetic apparatus when planted in soil covered with impermeable pavement. The effects of soil cover with different materials on tree growth and physiology were little, because newly planted trees have most of their roots still confined in the unpaved planting pit. Still, the reduction of soil sealing around the planting pit triggered the establishment of sensitive species such as ash. Further research is needed to assess the effects of different pavement types on established, larger trees. Copyright © 2017 Elsevier Inc. All rights reserved.

Evaluation of MIT-SCAN-T2 for Thickness Quality Control for PCC and HMA Pavements

DOT National Transportation Integrated Search

2018-02-01

Thickness is currently a pay item for PCC pavements and a quality control item for both PCC and HMA pavements. A change in pavement thickness of 0.5 in. can result in a change of multiple years of service. Current thickness measurements are performed...

Long-term Plan for Concrete Pavement Research and Technology--The Concrete Pavement Road Map : Volume II, Tracks

DOT National Transportation Integrated Search

2005-09-01

The Long-Term Plan for Concrete Pavement Research and Technology (CP Road Map) is a holistic, strategic : plan for concrete pavement research and technology transfer. The CP Road Map is a 7- to 10-year plan that : includes 12 distinct but integrated ...

Summary report on the performance of open graded friction course quieter pavements : I-5 Lynnwood, SR-520 Medina, I-405 Bellevue.

DOT National Transportation Integrated Search

2013-09-01

This document summarizes the acoustic properties and pavement performance of three asphalt quieter pavement projects. Each of the projects included open graded friction course pavement built with sections of crumb rubber and polymer modified asphalt ...

Finite element simulation of structural performance on flexible pavements with stabilized base/treated sub-base materials under accelerated loading : research project capsule.

DOT National Transportation Integrated Search

2008-12-01

PROBLEM: The full-scale accelerated pavement testing (APT) provides a unique tool for pavement : engineers to directly collect pavement performance and failure data under heavy : wheel loading. However, running a full-scale APT experiment is very exp...

Evaluation of current Louisiana flexible pavement structures using PMS data and new mechanistic-empirical pavement design guide.

DOT National Transportation Integrated Search

2012-04-01

The new Mechanistic-Empirical Pavement Design Guide (MEPDG) developed under the National Cooperative Highway Research Program (NCHRP) Project 1-37A represents a major change as compared to the 1993 AASHTO Pavement Design Guide. The MEPDG provides a r...

Hot mix asphalt research investigation for Connecticut : part C - permeability/porosity testing of HMA mix designs.

DOT National Transportation Integrated Search

2014-07-01

The presence of water in asphalt pavements is detrimental to the life of the pavement. Most construction specifications require the pavement to be compacted to a specific air void content. As an asphalt pavement's air void contents increase, the perm...

How to reduce tire-pavement noise : better practices for constructing and texturing concrete pavement surfaces.

DOT National Transportation Integrated Search

2012-08-01

Concrete pavements can be designed and constructed to be as quiet as any other conventional pavement type in use today. This report provides an overview of how this can be doneand done consistently. In order to construct a quieter concrete pavemen...

Long-term Plan for Concrete Pavement Research and Technology--the Concrete Pavement Road Map (second generation) : Volume II, Tracks

DOT National Transportation Integrated Search

2012-07-01

The Long-Term Plan for Concrete Pavement Research and Technology (CP Road Map) is a holistic strategic plan for : concrete pavement research and technology transfer. The CP Road Map is a living plan that includes 12 distinct but : integrated research...

Predictive design procedures, VESYS users manual : an interim design method for flexible pavements using the VESYS structural subsystem

DOT National Transportation Integrated Search

1978-01-01

This manual has been written to provide the pavement manager and design engineer with a ready reference of procedures to predict the structural responses and hence the integrity of flexible pavements. A pavement section of known geometry is chosen, a...

Finite element simulation of structural performance on flexible pavements with stabilized base/treated subbase materials under accelerated loading : tech summary.

DOT National Transportation Integrated Search

2011-12-01

Accelerated pavement testing (APT) has been increasingly used by state highway agencies in recent years for evaluating pavement : design and performance through applying a simulative heavy vehicular load to the pavement section under controlled fi el...

Field Performance of Fiber-Reinforced Concrete Airfield Pavements.

DTIC Science & Technology

1986-07-01

were less severe at some fiver-reinforced concrete pavements at JFK airport in New York than at some of the other airports. The pavements at JFK ... airport did use a poly- ethylene sheet as a bond breaker between the fiber-reinforced overlay and base pavement. This may have helped reduce frictional

Design and construction of PCC pavements. Volume 1, summary of design features and construction practices that influence performance of pavements

DOT National Transportation Integrated Search

1998-04-01

A study has been conducted to evaluate and analyze Portland cement concrete (PCC) pavements in order to develop recommendations for the design and construction of long-lived concrete pavements. In involved a detailed evaluation and analysis of the PC...

Evaluation of current Louisiana flexible pavement structures using PMS data and new mechanistic-empirical pavement design guide : tech summary.

DOT National Transportation Integrated Search

2012-04-01

The new Mechanistic-Empirical Pavement Design Guide (MEPDG) developed under the National Cooperative Highway : Research Program (NCHRP) Project 1-37A represents a major change as compared to the 1993 AASHTO Pavement : Design Guide. MEPDG provides a r...

Long-Term Pavement Performance Program: Pavement Performance Measures and Forecasting and the Effects of Maintenance and Rehabilitation Strategy on Treatment Effectiveness [Tech Brief

DOT National Transportation Integrated Search

2016-08-01

This document is a technical summary of the Federal Highway Administration Long-Term Pavement Performance Program report, Pavement Performance Measures and Forecasting and the Effects of Maintenance and Rehabilitation Strategy on Treatment Effectiven...

Recommended practice for accepting new concrete pavement surfaces for tire/pavement noise : designation CPSCP PP 1-11 (rev 3/1/2011).

DOT National Transportation Integrated Search

2011-03-01

This practice provides guidance and example specification language intended for use by Owner- : Agencies in development of specific contract language when requiring the evaluation of : tire/pavement noise for new concrete pavement surfaces. The overa...

Design and construction of PCC pavements. Volume 2, design features and practices that influence performance of pavements

DOT National Transportation Integrated Search

1998-10-01

A study has been conducted to evaluate and analyze Portland cement concrete (PCC) pavements in order to develop recommendations for the design and construction of long-lived concrete pavements. In involved a detailed evaluation and analysis of the PC...

Double layer drainage performance of porous asphalt pavement

NASA Astrophysics Data System (ADS)

Ji, Yangyang; Xie, Jianguang; Liu, Mingxi

2018-06-01

In order to improve the design reliability of the double layer porous asphalt pavement, the 3D seepage finite element method was used to study the drainage capacity of double layer PAC pavements with different geometric parameters. It revealed that the effect of pavement drainage length, slope, permeability coefficient and structure design on the drainage capacity. The research of this paper can provide reference for the design of double layer porous asphalt pavement in different rainfall intensity areas, and provide guides for the related engineering design.

Surface properties-vehicle interaction

NASA Astrophysics Data System (ADS)

Huft, D. L.; Her, I.; Agrawal, S. K.; Zimmer, R. A.; Bester, C. J.

Several topics related to the surface properties of aircraft runways are discussed. The South Dakota profilometer; development of a data acquisition method for noncontact pavement macrotexture measurement; the traction of an aircraft tire on grooved and porous asphaltic concrete; holes in the pavements; the effect of pavement type and condition on the fuel consumption of vehicles; the traction loss of a suspended tire on a sinusoidal road; the effect of vehicle and driver characteristics on the psychological evaluation of road roughness; the correlation of subjective panel ratings of pavement ride quality with profilometer-derived measures of pavement roughness; a microprocessor-based noncontact distance measuring control system, and, the representation of pavement surface topography in predicting runoff depths and hydroplaning potential are discussed.

Long-term stormwater quantity and quality performance of permeable pavement systems.

PubMed

Brattebo, Benjamin O; Booth, Derek B

2003-11-01

This study examined the long-term effectiveness of permeable pavement as an alternative to traditional impervious asphalt pavement in a parking area. Four commercially available permeable pavement systems were evaluated after 6 years of daily parking usage for structural durability, ability to infiltrate precipitation, and impacts on infiltrate water quality. All four permeable pavement systems showed no major signs of wear. Virtually all rainwater infiltrated through the permeable pavements, with almost no surface runoff. The infiltrated water had significantly lower levels of copper and zinc than the direct surface runoff from the asphalt area. Motor oil was detected in 89% of samples from the asphalt runoff but not in any water sample infiltrated through the permeable pavement. Neither lead nor diesel fuel were detected in any sample. Infiltrate measured 5 years earlier displayed significantly higher concentrations of zinc and significantly lower concentrations of copper and lead.

Mechanical Response Analysis of Long-life Asphalt Pavement Structure of Yunluo High-speed on the Semi-rigid Base

NASA Astrophysics Data System (ADS)

Liu, Feng; Wu, Chuanhai; Xu, Xinquan; Li, Hao; Wang, Zhixiang

2018-01-01

In order to grasp the rule of the strain change of the semi-rigid asphalt pavement structure under the FWD load and provide a reliable theoretical and practical basis for the design of the pavement structure, based on the test section of Guangdong Yunluo expressway, taking FWD as the loading tool, by using the finite element analysis software ANSYS, the internal variation rules of each pavement structural layer were obtained. Based on the results of the theoretical analysis, the measured strain sensor was set up in the corresponding layer of the pavement structure, and the strain test plan was determined. Based on the analysis of the strain data obtained from several structural layers and field monitoring, the rationality of the type pavement structure and the strain test scheme were verified, so as to provide useful help for the design and the maintenance of the pavement structure.

Development of a classification method for a crack on a pavement surface images using machine learning

NASA Astrophysics Data System (ADS)

Hizukuri, Akiyoshi; Nagata, Takeshi

2017-03-01

The purpose of this study is to develop a classification method for a crack on a pavement surface image using machine learning to reduce a maintenance fee. Our database consists of 3500 pavement surface images. This includes 800 crack and 2700 normal pavement surface images. The pavement surface images first are decomposed into several sub-images using a discrete wavelet transform (DWT) decomposition. We then calculate the wavelet sub-band histogram from each several sub-images at each level. The support vector machine (SVM) with computed wavelet sub-band histogram is employed for distinguishing between a crack and normal pavement surface images. The accuracies of the proposed classification method are 85.3% for crack and 84.4% for normal pavement images. The proposed classification method achieved high performance. Therefore, the proposed method would be useful in maintenance inspection.

Effect of Bio based rejuvenator on mix design, Energy consumption and GHG Emission of High RAP Mixture

NASA Astrophysics Data System (ADS)

Abdullahi Ahmad, Kabiru; Ezree Abdullah, Mohd; Hassan, Norhidayah Abdul; Usman, Nura; Hassan, Mohd Rosli Mohd; Bilema, Munder A. M.; Modibbo Saeed, Saeed; Batari, Ahmad

2018-04-01

Concerns about the cost, availability, and environmental impact of using petroleum-based materials have led to increased usage of reclaimed asphalt pavement (RAP). Mean-while, the demand of the road industry to decrease the energy consumptions and reduce the release of greenhouse gases as well as other harmful gases, which cause serious air pollution has increased due to the amount of energy consumed is a major component of pavement construction that significantly contributes to the total cost. This paper evaluates the effects of Biobased rejuvenator known as JCO on the required heat energy and the amount of CO2 produced to increase the temperature of RAP and virgin aggregates and one binder from 25C to the point of mixing. The results showed that incorporating Biobased rejuvenator (JCO) can potentially reduce the required heat energy and amount of greenhouse gas produced by RAP and virgin, respectively.

Article title misstates the role of pavement sealers.

PubMed

O'Reilly, Kirk

2014-08-01

The claim made in the title of Witter et al. (2014) "Coal-tar-based sealcoated pavement: A major PAH source to urban stream sediments" is not supported by the data presented. The author's use of Pearson correlation coefficients is insufficient to indicate causation. The application of spatial analysis and principle component analysis did not include sealer specific inputs, so provides no basis for the claim. To test the hypothesis that sealers are a source of PAHs in the stream studied, EPA's Chemical Mass Balance (CMB) source evaluation model was applied to Witter's sediment data. CMB found an excellent fit (R(2) > 0.999) between measured and modeled PAH concentrations when sealers were not included as a potential source. This finding does not support Witter et al. (2014) claim that sealers are a major source of PAHs. Copyright © 2013 Elsevier Ltd. All rights reserved.

Long-term Plan for Concrete Pavement Research and Technology--the Concrete Pavement Road Map (second generation) : Volume I, Background and Summary

DOT National Transportation Integrated Search

2012-04-01

The Long-Term Plan for Concrete Pavement Research and Technology (CP Road Map) is a holistic strategic plan for concrete : pavement research and technology transfer. The CP Road Map is a living plan that includes 12 distinct but integrated research :...

Long-term Plan for Concrete Pavement Research and Technology--the Concrete Pavement Road Map : Volume I, Background and summary

DOT National Transportation Integrated Search

2005-09-01

The Long-Term Plan for Concrete Pavement Research and Technology (CP Road Map) is a holistic, strategic plan : for concrete pavement research and technology transfer. The CP Road Map is a 7- to 10-year plan that includes 12 : distinct but integrated ...

Evaluation of MIT-SCAN-T2 for thickness quality control for PCC and HMA pavements : research project capsule.

DOT National Transportation Integrated Search

2013-04-01

Thickness is currently a pay item for portland cement concrete (PCC) pavements : and a quality control item for both PCC and hot mix asphalt (HMA) pavements. : A change in pavement thickness of 0.5 in. can result in a reduction of multiple : years of...

Mechanistic-Empirical Pavement Design Guide Flexible Pavement Performance Prediction Models Volume III Field Guide - Calibration and User's Guide for the Mechanistic-Empirical Pavement Design Guide

DOT National Transportation Integrated Search

2007-08-01

The objective of this research study was to develop performance characteristics or variables (e.g., ride quality, rutting, : fatigue cracking, transverse cracking) of flexible pavements in Montana, and to use these characteristics in the : implementa...

23 CFR 972.208 - Federal lands pavement management system (PMS).

Code of Federal Regulations, 2011 CFR

2011-04-01

... 23 Highways 1 2011-04-01 2011-04-01 false Federal lands pavement management system (PMS). 972.208....208 Federal lands pavement management system (PMS). In addition to the requirements provided in § 972...) The PMS may be based on the concepts described in the AASHTO's “Pavement Management Guide.”2 2...

23 CFR 972.208 - Federal lands pavement management system (PMS).

Code of Federal Regulations, 2013 CFR

2013-04-01

... 23 Highways 1 2013-04-01 2013-04-01 false Federal lands pavement management system (PMS). 972.208....208 Federal lands pavement management system (PMS). In addition to the requirements provided in § 972...) The PMS may be based on the concepts described in the AASHTO's “Pavement Management Guide.”2 2...

23 CFR 972.208 - Federal lands pavement management system (PMS).

Code of Federal Regulations, 2014 CFR

2014-04-01

... 23 Highways 1 2014-04-01 2014-04-01 false Federal lands pavement management system (PMS). 972.208....208 Federal lands pavement management system (PMS). In addition to the requirements provided in § 972...) The PMS may be based on the concepts described in the AASHTO's “Pavement Management Guide.”2 2...

23 CFR 972.208 - Federal lands pavement management system (PMS).

Code of Federal Regulations, 2010 CFR

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false Federal lands pavement management system (PMS). 972.208....208 Federal lands pavement management system (PMS). In addition to the requirements provided in § 972...) The PMS may be based on the concepts described in the AASHTO's “Pavement Management Guide.”2 2...

23 CFR 972.208 - Federal lands pavement management system (PMS).

Code of Federal Regulations, 2012 CFR

2012-04-01

... 23 Highways 1 2012-04-01 2012-04-01 false Federal lands pavement management system (PMS). 972.208....208 Federal lands pavement management system (PMS). In addition to the requirements provided in § 972...) The PMS may be based on the concepts described in the AASHTO's “Pavement Management Guide.”2 2...

Hot mix asphalt research investigation for Connecticut, part D : evaluate the feasibility of using permeability for in-place density dispute resolution on bridge decks.

DOT National Transportation Integrated Search

2014-07-01

The presence of water in asphalt pavements is detrimental to the life of the pavement. Most : construction specifications require the pavement to be compacted to a specific air void content. As an asphalt : pavements air void content increases, th...

77 FR 22058 - Agency Information Collection Activities: Request for Comments for a New Information Collection

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-12

... Pavement Types in the FHWA Traffic Noise Model: Regulatory and Procedural Changes. Background: The Federal... to as ``quieter pavements.'' In 2003, the FHWA entered into the Quiet Pavement Pilot Program with the Arizona Department of Transportation, co-sponsored the 2004 International Scan on ``Quieter Pavement...

The leaf phenophase of deciduous species altered by land pavements

NASA Astrophysics Data System (ADS)

Chen, Yuanyuan; Wang, Xiaoke; Jiang, Bo; Li, Li

2018-06-01

It has been widely reported that the urban environment alters leaf and flowering phenophases; however, it remains unclear if land pavement is correlated with these alterations. In this paper, two popular deciduous urban trees in northern China, ash ( Fraxinus chinensis) and maple ( Acer truncatum), were planted in pervious and impervious pavements at three spacings (0.5 m × 0.5 m, 1.0 m × 1.0 m, and 2.0 m × 2.0 m apart). The beginning and end dates of the processes of leaf budburst and senescence were recorded in spring and fall of 2015, respectively. The results show that leaf budburst and senescence were significantly advanced in pavement compared to non-pavement lands. The date of full leaf budburst was earlier by 0.7-9.3 days for ash and by 0.3-2.3 days for maple under pavements than non-pavements, respectively. As tree spacing increases, the advanced days of leaf budburst became longer. Our results clearly indicate that alteration of leaf phenophases is attributed to land pavement, which should be taken into consideration in urban planning and urban plant management.

The leaf phenophase of deciduous species altered by land pavements

NASA Astrophysics Data System (ADS)

Chen, Yuanyuan; Wang, Xiaoke; Jiang, Bo; Li, Li

2018-02-01

It has been widely reported that the urban environment alters leaf and flowering phenophases; however, it remains unclear if land pavement is correlated with these alterations. In this paper, two popular deciduous urban trees in northern China, ash (Fraxinus chinensis) and maple (Acer truncatum), were planted in pervious and impervious pavements at three spacings (0.5 m × 0.5 m, 1.0 m × 1.0 m, and 2.0 m × 2.0 m apart). The beginning and end dates of the processes of leaf budburst and senescence were recorded in spring and fall of 2015, respectively. The results show that leaf budburst and senescence were significantly advanced in pavement compared to non-pavement lands. The date of full leaf budburst was earlier by 0.7-9.3 days for ash and by 0.3-2.3 days for maple under pavements than non-pavements, respectively. As tree spacing increases, the advanced days of leaf budburst became longer. Our results clearly indicate that alteration of leaf phenophases is attributed to land pavement, which should be taken into consideration in urban planning and urban plant management.

Numerical study of the thermal behavior of a new deicing road structure design with energy harvesting capabilities

NASA Astrophysics Data System (ADS)

Le Touz, Nicolas; Dumoulin, Jean

2015-04-01

Facing the heavy organisational, financial and environmental constraints imposed by usual winter maintenance salting operations, pavement engineers have been led to look for alternative solutions to avoid ice or snow deposit at pavements surface. Among the solutions, one is self-de-icing heating pavements, for which two technologies have been developed so far: one is based on embedded coils circulating a heated calorific fluid under the pavement surface; the other one relies on the use of embedded resistant electric wires. The use and operation of such systems in the world is still limited and was only confined to small road stretches or specific applications, such as bridges which are particularly sensitive to frost. One of the most significant "coil technology" example in Europe is the SERSO-System (Solar Energy recovery from road surfaces) built in 1994, on a Switzerland bridge. Many of these experiences are referenced in the technical literature, which provides state-of-the art papers (see for instance Eugster) and useful detailed information dealing with the construction and operational management of such installation. The present study is taking part of the Forever Open Road Concept addressed by the R5G: 5th Generation Road [1], one of the major project supported by IFSTTAR. It considers a different design of self-de-icing road that simplify its mode of construction and maintenance, compared to the two technologies mentioned above. It should also be noted that similar to pavements instrumented with coils, such structure could be used in the reversible way to capture the solar energy at the pavement surface during sunny days and store it, to either warm the pavement at a later stage or for exogenous needs (e.g. contribution to domestic hot water). To complete our study we also considered the use of semi-transparent pavement course wearing in place of the traditional opaque one. In the present study, a 2D model was developed using FEM approach. It combines 2 numerical models. One is dedicated to the calculation of the heat transfer inside the porous layer between the fluid and the structure according to the geometry studied and the physical properties of the components of the system. The second one addresses the heat transfer inside the different layer of the pavement and was adapted to allow the insertion of a semi-transparent surface layer (for sun radiation). The temperature spatial distribution within the structure and its surface is calculated at different time step according to the evolution of boundary conditions at its surface. Various location in France were selected and calculation of the temperature field was carried-out over a year. Discussion on the performances of such system versus its location is proposed. Influence of a semi-transparent layer is also discussed. Future works will compared numerical simulations with experiments thank to a dedicated test bench under development and that will allow to test various structure in parallel. References [1] W. J. Eugster, Road and Bridge Heating Geothermal Energy. Overview and examples, European Geothermal Congress 2007 [2] http://www.ifsttar.fr/en/recherche-expertise/colonne-1/nos-grands-projets/r5g-5th-generation-road/

Analysis of Load Stress for Asphalt Pavement of Lean Concrete Base

NASA Astrophysics Data System (ADS)

Lijun, Suo; Xinwu, Wang

The study revealed that whether it is early distresses in asphalt pavement or not depends largely on working performance of base. In the field of asphalt pavement, it is widely accepted that lean concrete base, compared with the general semi-rigid base, has better working performance, such as high strength and good eroding resistance. Problem of early distresses in asphalt pavement, which caused by more traffic loadings, can be settled effectively when lean concrete is used in asphalt pavement. Traffic loading is important parameter used in the analysis of the new pavement design. However, few studies have done extensive and intensive research on the load stress for asphalt pavement of lean concrete base. Because of that, it is necessary to study the load stress for the asphalt pavement. In the paper, first of all, three-dimension finite element model of the asphalt pavement is created for the aim of doing mechanical analysis for the asphalt pavement. And then, the two main objectives of this study are investigated. One is analysis for load stress of lean concrete base, and the other is analysis for load stress of asphalt surface. The results show that load stress of lean concrete base decreases, decrease and increase with increase of base's thickness, surface's thickness and ratio of base's modulus to foundation's modulus respectively. So far as the asphalt surface is concerned, maximum shearing stress, which is caused by load, is evident in asphalt surface which is located in transverse contraction joint of lean concrete base of asphalt pavement. Maximum shearing stress decrease, decrease, decrease and increase respectively with increase of the surface's modulus, the surface's thickness, base's thickness and ratio of base's modulus to foundation's modulus.

Use of Ground Penetrating Radar at the FAA's National Airport Pavement Test Facility

NASA Astrophysics Data System (ADS)

Injun, Song

2015-04-01

The Federal Aviation Administration (FAA) in the United States has used a ground-coupled Ground Penetrating Radar (GPR) at the National Airport Pavement Test Facility (NAPTF) since 2005. One of the primary objectives of the testing at the facility is to provide full-scale pavement response and failure information for use in airplane landing gear design and configuration studies. During the traffic testing at the facility, a GSSI GPR system was used to develop new procedures for monitoring Hot Mix Asphalt (HMA) pavement density changes that is directly related to pavement failure. After reviewing current setups for data acquisition software and procedures for identifying different pavement layers, dielectric constant and pavement thickness were selected as dominant parameters controlling HMA properties provided by GPR. A new methodology showing HMA density changes in terms of dielectric constant variations, called dielectric sweep test, was developed and applied in full-scale pavement test. The dielectric constant changes were successfully monitored with increasing airplane traffic numbers. The changes were compared to pavement performance data (permanent deformation). The measured dielectric constants based on the known HMA thicknesses were also compared with computed dielectric constants using an equation from ASTM D4748-98 Standard Test Method for Determining the Thickness of Bound Pavement Layers Using Short-Pulse Radar. Six inches diameter cylindrical cores were taken after construction and traffic testing for the HMA layer bulk specific gravity. The measured bulk specific gravity was also compared to monitor HMA density changes caused by aircraft traffic conditions. Additionally this presentation will review the applications of the FAA's ground-coupled GPR on embedded rebar identification in concrete pavement, sewer pipes in soil, and gage identifications in 3D plots.

GPR used in combination with other NDT methods for assessing pavements in PPP projects

NASA Astrophysics Data System (ADS)

Loizos, Andreas; Plati, Christina

2014-05-01

In the recent decades, Public-Private Partnerships (PPP) has been adopted for highway infrastructure procurement in many countries. PPP projects typically take the form of a section of highway and connecting roadways which are to be construction and managed for a given concession period. Over the course of the highway concession period, the private agency takes over the pavement maintenance and rehabilitation duties. On this purpose, it is critical to find the most cost effective way to maintain the infrastructure in compliance with the agreed upon performance measures and a Pavement Management Systems (PMS) is critical to the success of this process. For the prosperous operation of a PMS it is necessary to have appropriate procedures for pavement monitoring and evaluation, which is important in many areas of pavement engineering. Non Destructive Testing (NDT) has played a major role in pavement condition monitoring, assessments and evaluation accomplishing continuous and quick collection of pavement data. The analysis of this data can lead to indicators related to trigger values (criteria) that define the pavement condition based on which the pavement "health" is perceived helping decide whether there is the need or not to intervene in the pavement. The accomplished perception appoints required management activities for preserving pavements in favor not only of the involved highway/road agencies but also of users' service. Amongst NDT methods Ground Penetrating Radar (GPR) seems to be a very powerful toll, as it provides a range of condition and construction pavement information. It can support effectively the implementation of PMS activities in the framework of pavement monitoring and evaluation. Given that, the present work aims to the development and adaptation of a protocol for the use of GPR in combination with other NDT methods, such as Falling Weight Deflectometer (FWD), for assessing pavements in PPP projects. It is based on the experience of Laboratory of Pavement Engineering of National Technical University of Athens (NTUA) gained through its research activities in various Greek PPP projects as well its involvement in several related European and International scientific actions. It is suggested that the implementation of such protocol could support the pavement management activities with respect to the needs of a PPP project. This is accomplished through the resulted advantages that include simplicity in application, economic benefits and familiarity that are very important factors towards the optimization of the resources and the utilization of the available information; both of them are required for the orderly operation of a PPP project. Acknowledgments: This work benefited from networking activities carried out within the EU funded COST Action TU1208 "Civil Engineering Applications of Ground Penetrating Radar."

Performance of pavements designed with low-cost materials

NASA Astrophysics Data System (ADS)

Grau, R. W.; Yrjanson, W. A.; Packard, R. G.; Barksdale, R. D.; Potts, C. F.; Ruth, B. E.; Smith, L. L.; Huddleston, I. J.; Vinson, T. S.; Hicks, R. G.

1980-04-01

The following areas are discussed. Utilization of marginal aggregate materials for secondary road surface layers; econocrete pavements; current practices; construction and performance of sand-asphalt bases and performance of sand-asphalt and limerock pavements in Florida. Cement stabilization of degrading aggregates use of crushed stone screenings in highway construction (abridgement); and sulfur-asphalt pavement technology are also reviewed.

Improving Distribution of Military Programs’ Technical Criteria

DTIC Science & Technology

1993-08-01

Vacuum System ETL 1110-3-380 01/29/88 Std Distribution of Military Arfid Pavement Dsg ETL 1110-3-381 01/29/88 Airfield Pavement Design ETL 1110-3...Army Arfid O&M Facilities TM 5-825-2 08/01/78 Flexible Pavement Design for Airfields TM 5-825-2-1 11/01/89 Army Airfields Pavements, Flex (Appendix

Preparation of the implementation plan of AASHTO Mechanistic-Empirical Pavement Design Guide (M-EPDG) in Connecticut : Phase II : expanded sensitivity analysis and validation with pavement management data.

DOT National Transportation Integrated Search

2017-02-08

The study re-evaluates distress prediction models using the Mechanistic-Empirical Pavement Design Guide (MEPDG) and expands the sensitivity analysis to a wide range of pavement structures and soils. In addition, an extensive validation analysis of th...

Pavement-Transportation Computer Assisted Structural Engineering (PCASE) Implementation of the Modified Berggren (ModBerg) Equation for Computing the Frost Penetration Depth within Pavement Structures

DTIC Science & Technology

2012-04-01

ER D C/ G SL T R -1 2 -1 5 Pavement -Transportation Computer Assisted Structural Engineering (PCASE) Implementation of the Modified...Berggren (ModBerg) Equation for Computing the Frost Penetration Depth within Pavement Structures G eo te ch n ic al a n d S tr u ct u re s La b or at...April 2012 Pavement -Transportation Computer Assisted Structural Engineering (PCASE) Implementation of the Modified Berggren (ModBerg) Equation for

Review of modern methods for continuous friction measurement on airfield pavements

NASA Astrophysics Data System (ADS)

Iwanowski, Paweł; Blacha, Krzysztof; Wesołowski, Mariusz

2018-05-01

The safety of traffic, including both road and air traffic on a ground manoeuvre area, depends on many factors. These mainly include the anti-slip properties of a road or airfield pavement on which the traffic takes place. The basic pavement parameter that determines its characteristics in terms of anti-slip properties is the skid resistance, which constitutes the ratio of the wheel downforce and the friction on the contact surface. There are currently many devices for continuous measurement of the skid resistance (Continuous Friction-Measuring Equipment - CFME) around the world. Most of them, in principle, do not vary much from one another. Most of the devices measure the measuring wheel’s downforce on the pavement and the friction on the wheel-pavement contact surface. The skid resistance is the result of this measurement. The devices vary in many aspects, such as the type and size of the used measuring tyre, pavement-wheel slip or tyre pressure. This does not mean that the results obtained from various devices mbe directly compared. On the other hand, each device allows determining the pavement’s anti-slip conditions in terms of the requirements specified for the given type of devices, thereby enabling pavement classification in these terms. The classification allows for comparing the results obtained from various measuring devices. The paper presents an overview of equipment used in Poland and around the world to measure the skid resistance on airfield pavements. The authors draw attention to the requirements for pavements in terms of their roughness, with division into road and airfield pavements.

Evaluation Model for Pavement Surface Distress on 3d Point Clouds from Mobile Mapping System

NASA Astrophysics Data System (ADS)

Aoki, K.; Yamamoto, K.; Shimamura, H.

2012-07-01

This paper proposes a methodology to evaluate the pavement surface distress for maintenance planning of road pavement using 3D point clouds from Mobile Mapping System (MMS). The issue on maintenance planning of road pavement requires scheduled rehabilitation activities for damaged pavement sections to keep high level of services. The importance of this performance-based infrastructure asset management on actual inspection data is globally recognized. Inspection methodology of road pavement surface, a semi-automatic measurement system utilizing inspection vehicles for measuring surface deterioration indexes, such as cracking, rutting and IRI, have already been introduced and capable of continuously archiving the pavement performance data. However, any scheduled inspection using automatic measurement vehicle needs much cost according to the instruments' specification or inspection interval. Therefore, implementation of road maintenance work, especially for the local government, is difficult considering costeffectiveness. Based on this background, in this research, the methodologies for a simplified evaluation for pavement surface and assessment of damaged pavement section are proposed using 3D point clouds data to build urban 3D modelling. The simplified evaluation results of road surface were able to provide useful information for road administrator to find out the pavement section for a detailed examination and for an immediate repair work. In particular, the regularity of enumeration of 3D point clouds was evaluated using Chow-test and F-test model by extracting the section where the structural change of a coordinate value was remarkably achieved. Finally, the validity of the current methodology was investigated by conducting a case study dealing with the actual inspection data of the local roads.

The application of permeable pavement with emphasis on successful design, water quality benefits, and identification of knowledge and data gaps : a summary report from the National Center for Sustainable Transportation.

DOT National Transportation Integrated Search

2015-06-01

Permeable pavement presented in this paper is defined as a type of pavement that has ability : to store stormwater until it infiltrates through the subgrade soil and can function as a : conventional pavement to carry specific traffic load and speed. ...

Development of a pavement management system for Virginia : final report on phase I : application and verification of a pilot pavement condition inventory for Virginia interstate flexible pavements.

DOT National Transportation Integrated Search

1984-01-01

The study reported here addresses some of the earlier phases in the development of a pavement management system for the state of Virginia. Among the issues discussed are the development of an adequate data base and the implementation of a condition r...

Urban permeable pavement system design based on “sponge city” concept

NASA Astrophysics Data System (ADS)

Yu, M. M.; Zhu, J. W.; Gao, W. F.; Xu, D. P.; Zhao, M.

2017-08-01

Based on the “sponge city” concept, to implement the goal of building a city within the city to solve the sponge waterlogging, rational utilization of water resources, reduce water pollution this paper, combined with the city planning level in China, establishes the design system of city road flooding from the macro, medium and micro level, explore the design method of city water permeable pavement system, and has a practical significance the lower flood risk water ecological problems. On the macro level, we established an urban pavement sponge system under the regional ecological pattern by “spot permeable open space - low impact developing rain water road system - catchment area and catchment wetland”. On a medium level, this paper proposed the permeable suitability of pavement and the planning control indicators when combined with urban functional districts to conduct permeable pavement roads plans and controls. On micro level, the paper studied sponge technology design of permeable pavement from road structure, surface material, and other aspects aimed at the pavement permeability requirements.

Pavement markings and safety : tech transfer summary.

DOT National Transportation Integrated Search

2010-11-01

Objective: This study explores the statistical relationship between crash occurrence probability and longitudinal pavement marking retroreflectivity. : Problem Statement: Previous research on pavement markings, from a safety perspective, tackled vari...

Pavement marking performance analysis

DOT National Transportation Integrated Search

2009-06-30

This research evaluated pavement marking performance and developed useful degradation models for thermoplastic : and paint pavement markings which can help North Carolina meet the pending FHWA minimum retroreflectivity : requirements. The impacts of ...

Evaluation of airfield pavement evenness

NASA Astrophysics Data System (ADS)

Pietruszewski, Paweł; Poświata, Adam; Wesołowski, Mariusz

2018-05-01

The evenness of airfield pavements is one of the basic operating parameters, which characterize them. The evenness determines not only comfort of traffic along an airfield pavement, but also influences the size of dynamic effect on the pavement, hence, the safety of air operations. In addition, the evenness condition changing as a result of dynamic loads, adverse weather conditions or inappropriate airfield pavement construction technology, lead to deviations from the desired condition in the form of longitudinal and transverse unevenness. As a result, systematic and correct performance of tests is a very significant and required factor impacting the improvement of traffic safety on airfield pavements. If the data obtained through the measurements are not sufficiently reliable, they may consequently lead to making incorrect decisions, which can ultimately impact the safety of air operations.

A Summary of Research on Energy Saving and Emission Reduction of Transportation

NASA Astrophysics Data System (ADS)

Cheng, Dongxiang; Wu, Lufen

2017-12-01

Road transport is an important part of transportation, and road in the field of energy-saving emission reduction is a very important industry. According to the existing problems of road energy saving and emission reduction, this paper elaborates the domestic and international research on energy saving and emission reduction from three aspects: road network optimization, pavement material and pavement maintenance. Road network optimization may be overlooked, and the research content is still relatively preliminary; pavement materials mainly from the asphalt pavement temperature mixed asphalt technology research; pavement maintenance technology development is relatively comprehensive.

Mechanical performance of porous concrete pavement containing nano black rice husk ash

NASA Astrophysics Data System (ADS)

Ibrahim, M. Y. Mohd; Ramadhansyah, P. J.; Rosli, H. Mohd; Ibrahim, M. H. Wan

2018-01-01

This paper presents an experimental research on the performance of nano black rice husk ash on the porous concrete pavement properties. The performance of the porous concrete pavement mixtures was investigated based on their compressive strength, flexural strength, and splitting tensile strength. The results indicated that using nano material from black rice husk ash improved the mechanical properties of porous concrete pavement. In addition, the result of compressive, flexural, and splitting tensile strength was increased with increasing in curing age. Finally, porous concrete pavement with 10% replacement levels exhibited an excellent performance with good strength compared to others.

Georgia concrete pavement performance and longevity.

DOT National Transportation Integrated Search

2012-02-01

The Georgia Department of Transportation (GDOT) has effectively utilized its pavement management system (PMS) to make informed, data-driven pavement maintenance decisions, including project selection, project prioritization, and funding allocation. C...

Serviceable pavement marking retroreflectivity levels : technical report.

DOT National Transportation Integrated Search

2009-03-01

This research addressed an array of issues related to measuring pavement markings retroreflectivity, factors : related to pavement marking performance, subjective evaluation process, best practices for using mobile : retroreflectometers, sampling pav...

Assessment of highway pavements using GPR

NASA Astrophysics Data System (ADS)

Plati, Christina; Loizos, Andreas

2015-04-01

Highway infrastructure is a prerequisite for a functioning economy and social life. Highways, often prone to congestion and disruption, are one of the aspects of a modern transport network that require maximum efficiency if an integrated transport network, and sustainable mobility, is to be achieved. Assessing the condition of highway structures, to plan subsequent maintenance, is essential to allow the long-term functioning of a road network. Optimizing the methods used for such assessment will lead to better information being obtained about the road and underlying ground conditions. The condition of highway structures will be affected by a number of factors, including the properties of the highway pavement, the supporting sub-base and the subgrade (natural ground), and the ability to obtain good information about the entire road structure, from pavement to subgrade, allows appropriate maintenance programs to be planned. The maintenance of highway pavements causes considerable cost and in many cases obstruction to traffic flow. In this situation, methods that provide information on the present condition of pavement structure non-destructively and economically are of great interest. It has been shown that Ground-Penetrating-Radar (GPR), which is a Non Destructive Technique (NDT), can deliver information that is useful for the planning of pavement maintenance activities. More specifically GPR is used by pavement engineers in order to determine physical properties and characteristics of the pavement structure, information that is valuable for the assessment of pavement condition. This work gives an overview on the practical application of GPR using examples from highway asphalt pavements monitoring. The presented individual applications of GPR pavement diagnostics concern structure homogeneity, thickness of pavement layers, dielectric properties of asphalt materials etc. It is worthwhile mentioning that a number of applications are standard procedures, either separately or in combination with other NDT methods, but even for them there is still a room for improvement and there is still need to set stricter regulations Comparisons between radar results and ground truth data produce evidence in support of the statement that the accuracy and reliability of radar results is sufficient for facing many issues related to the evaluation of asphalt pavements. Thus, benefits and limits of this method are shown and recommendations for GPR inspections are presented. Acknowledgments: This work benefited from networking activities carried out within the EU funded COST Action TU1208 "Civil Engineering Applications of Ground Penetrating Radar."

Impacts of pavement types on in-vehicle noise and human health.

PubMed

Li, Qing; Qiao, Fengxiang; Yu, Lei

2016-01-01

Noise is a major source of pollution that can affect the human physiology and living environment. According to the World Health Organization (WHO), an exposure for longer than 24 hours to noise levels above 70 dB(A) may damage human hearing sensitivity, induce adverse health effects, and cause anxiety to residents nearby roadways. Pavement type with different roughness is one of the associated sources that may contribute to in-vehicle noise. Most previous studies have focused on the impact of pavement type on the surrounding acoustic environment of roadways, and given little attention to in-vehicle noise levels. This paper explores the impacts of different pavement types on in-vehicle noise levels and the associated adverse health effects. An old concrete pavement and a pavement with a thin asphalt overlay were chosen as the test beds. The in-vehicle noise caused by the asphalt and concrete pavements were measured, as well as the drivers' corresponding heart rates and reported riding comfort. Results show that the overall in-vehicle sound levels are higher than 70 dB(A) even at midnight. The newly overlaid asphalt pavement reduced in-vehicle noise at a driving speed of 96.5 km/hr by approximately 6 dB(A). Further, on the concrete pavement with higher roughness, driver heart rates were significantly higher than on the asphalt pavement. Drivers reported feeling more comfortable when driving on asphalt than on concrete pavement. Further tests on more drivers with different demographic characteristics, along highways with complicated configurations, and an examination of more factors contributing to in-vehicle noise are recommended, in addition to measuring additional physical symptoms of both drivers and passengers. While there have been many previous noise-related studies, few have addressed in-vehicle noise. Most studies have focused on the noise that residents have complained about, such as neighborhood traffic noise. As yet, there have been no complaints by drivers that their own in-vehicle noise is too loud. Nevertheless, it is a fact that in-vehicle noise can also result in adverse health effects if it exceeds 85 dB(A). Results of this study show that in-vehicle noise was strongly associated with pavement type and roughness; also, driver heart rate patterns presented statistically significant differences on different types of pavement with different roughness.

Hot in-Place Recycling of Asphalt Pavements.

DTIC Science & Technology

1987-08-04

WEARING SPECIFIED THICKNESS SURFACE • b. With ’Tew Aggregate, Modifier, And Asphalt ," ..’ . ,,, /f",’"" 4.. Figure 8. Typical Cold In-Place...34. .. .; ’-. , .?-. . ; ,....",.’.". ’. .- +-;-?,..- . .-’. , .. ’.,,..-, . ..- ?.,,,..-N ....-, ..,-. -".,,’." - HOT IN-PLACE RECYCLING OF ASPHALT PAVEMENTS An Engineering Report by0 Michael Lawrence Dowdy Submitted...for asphalt pavements. This type of asphalt pavement recycling process is becoming

The use of reflective and permeable pavements as a potential practice for heat island mitigation and stormwater management

NASA Astrophysics Data System (ADS)

Li, H.; Harvey, J. T.; Holland, T. J.; Kayhanian, M.

2013-03-01

To help address the built environmental issues of both heat island and stormwater runoff, strategies that make pavements cooler and permeable have been investigated through measurements and modeling of a set of pavement test sections. The investigation included the hydraulic and thermal performance of the pavements. The permeability results showed that permeable interlocking concrete pavers have the highest permeability (or infiltration rate, ˜0.5 cm s-1). The two permeable asphalt pavements showed the lowest permeability, but still had an infiltration rate of ˜0.1 cm s-1, which is adequate to drain rainwater without generating surface runoff during most typical rain events in central California. An increase in albedo can significantly reduce the daytime high surface temperature in summer. Permeable pavements under wet conditions could give lower surface temperatures than impermeable pavements. The cooling effect highly depends on the availability of moisture near the surface layer and the evaporation rate. The peak cooling effect of watering for the test sections was approximately 15-35 °C on the pavement surface temperature in the early afternoon during summer in central California. The evaporative cooling effect on the pavement surface temperature at 4:00 pm on the third day (25 h after watering) was still 2-7 °C lower compared to that on the second day, without considering the higher air temperature on the third day. A separate and related simulation study performed by UCPRC showed that full depth permeable pavements, if designed properly, can carry both light-duty traffic and certain heavy-duty vehicles while retaining the runoff volume captured from an average California storm event. These preliminarily results indicated the technical feasibility of combined reflective and permeable pavements for addressing the built environment issues related to both heat island mitigation and stormwater runoff management.

Noise-tolerant inverse analysis models for nondestructive evaluation of transportation infrastructure systems using neural networks

NASA Astrophysics Data System (ADS)

Ceylan, Halil; Gopalakrishnan, Kasthurirangan; Birkan Bayrak, Mustafa; Guclu, Alper

2013-09-01

The need to rapidly and cost-effectively evaluate the present condition of pavement infrastructure is a critical issue concerning the deterioration of ageing transportation infrastructure all around the world. Nondestructive testing (NDT) and evaluation methods are well-suited for characterising materials and determining structural integrity of pavement systems. The falling weight deflectometer (FWD) is a NDT equipment used to assess the structural condition of highway and airfield pavement systems and to determine the moduli of pavement layers. This involves static or dynamic inverse analysis (referred to as backcalculation) of FWD deflection profiles in the pavement surface under a simulated truck load. The main objective of this study was to employ biologically inspired computational systems to develop robust pavement layer moduli backcalculation algorithms that can tolerate noise or inaccuracies in the FWD deflection data collected in the field. Artificial neural systems, also known as artificial neural networks (ANNs), are valuable computational intelligence tools that are increasingly being used to solve resource-intensive complex engineering problems. Unlike the linear elastic layered theory commonly used in pavement layer backcalculation, non-linear unbound aggregate base and subgrade soil response models were used in an axisymmetric finite element structural analysis programme to generate synthetic database for training and testing the ANN models. In order to develop more robust networks that can tolerate the noisy or inaccurate pavement deflection patterns in the NDT data, several network architectures were trained with varying levels of noise in them. The trained ANN models were capable of rapidly predicting the pavement layer moduli and critical pavement responses (tensile strains at the bottom of the asphalt concrete layer, compressive strains on top of the subgrade layer and the deviator stresses on top of the subgrade layer), and also pavement surface deflections with very low average errors comparable with those obtained directly from the finite element analyses.

Subsurface defect detection in first layer of pavement structure and reinforced civil engineering structure by FRP bonding using active infrared thermography

NASA Astrophysics Data System (ADS)

Dumoulin, Jean; Ibos, Laurent

2010-05-01

In many countries road network ages while road traffic and maintenance costs increase. Nowadays, thousand and thousand kilometers of roads are each year submitted to surface distress survey. They generally lean on pavement surface imaging measurement techniques, mainly in the visible spectrum, coupled with visual inspection or image processing detection of emergent distresses. Nevertheless, optimisation of maintenance works and costs requires an early detection of defects within the pavement structure when they still are hidden from surface. Accordingly, alternative measurement techniques for pavement monitoring are currently under investigation (seismic methods, step frequency radar). On the other hand, strengthening or retrofitting of reinforced concrete structures by externally bonded Fiber Reinforced Polymer (FRP) systems is now a commonly accepted and widespread technique. However, the use of bonding techniques always implies following rigorous installing procedures. To ensure the durability and long-term performance of the FRP reinforcements, conformance checking through an in situ auscultation of the bonded FRP systems is then highly suitable. The quality-control program should involve a set of adequate inspections and tests. Visual inspection and acoustic sounding (hammer tap) are commonly used to detect delaminations (disbonds) but are unable to provide sufficient information about the depth (in case of multilayered composite) and width of debonded areas. Consequently, rapid and efficient inspection methods are also required. Among the non destructive methods under study, active infrared thermography was investigated both for pavement and civil engineering structures through experiments in laboratory and numerical simulations, because of its ability to be also used on field. Pulse Thermography (PT), Pulse Phase Thermography (PPT) and Principal Component Thermography (PCT) approaches have been tested onto pavement samples and CFRP bonding on concrete samples in laboratory. In parallel numerical simulations have been used to generate a set of time sequence of thermal maps for simulated samples with and without subsurface defect. Using this set of experimental and simulated data different approaches (thermal contrast, FFT analysis, polynomial interpolation, singular value decomposition…) for defect location have been studied and compared. Defect depth retrieval was also studied on such data using different thermal model coupled to a direct or an inverse approach. Trials were conducted both with an uncooled and cooled infrared camera with different measurement performances. Results obtained will be discussed and analysed in the paper we plan to present. Finally, combining numerical simulations and experiments allows us discussing on the sensitivity influence of the infrared camera used to detect subsurface defects.

Pervious Pavement System Evaluation-Poster

EPA Science Inventory

Pervious pavement is a low impact development stormwater control. The Environmental Protection Agency's Urban Watershed Management Branch is evaluating interlocking concrete pavingstone pervious pavement systems. The pavingstones themselves are impermeable, but the spaces between...

Long term pavement performance computed parameter : frost penetration

DOT National Transportation Integrated Search

2008-11-01

As the pavement design process moves toward mechanistic-empirical techniques, knowledge of seasonal changes in pavement structural characteristics becomes critical. Specifically, frost penetration information is necessary for determining the effect o...

Saw & seal, airport pavement.

DOT National Transportation Integrated Search

2009-05-01

Due to extreme cold temperatures, hot bituminous pavements on Maines airports are subject to transverse : or thermal cracking. This can lead to poorly performing pavement structure causing heaving and : settlement problems. Studies have shown that...

Calibration of PMIS pavement performance prediction models.

DOT National Transportation Integrated Search

2012-02-01

Improve the accuracy of TxDOTs existing pavement performance prediction models through calibrating these models using actual field data obtained from the Pavement Management Information System (PMIS). : Ensure logical performance superiority patte...

Profilograph specification study.

DOT National Transportation Integrated Search

2010-10-01

Pavement smoothness is probably the single most important indicator of pavement performance according to the traveling public. Rough or uneven pavements adversely affect driver safety, ride quality, fuel efficiency, and vehicle wear and tear. Rough p...

Guidelines and implementation recommendations.

DOT National Transportation Integrated Search

2017-05-01

Based on findings from the literature review, laboratory tests, and pavement performance : simulations, researchers concluded that the use of reclaimed asphalt pavement (RAP) in Portland : cement concrete (PCC) is largely feasible for the pavement ap...

Quieter pavements guidance document

DOT National Transportation Integrated Search

2013-02-01

This report provides guidance and better practice recommendations to the National Park : Service for selecting pavement surfaces to minimize tire-pavement noise. The report : contains an overview of common technologies and methods for quieter pavemen...

Local differentiation of cell wall matrix polysaccharides in sinuous pavement cells: its possible involvement in the flexibility of cell shape.

PubMed

Sotiriou, P; Giannoutsou, E; Panteris, E; Galatis, B; Apostolakos, P

2018-03-01

The distribution of homogalacturonans (HGAs) displaying different degrees of esterification as well as of callose was examined in cell walls of mature pavement cells in two angiosperm and two fern species. We investigated whether local cell wall matrix differentiation may enable pavement cells to respond to mechanical tension forces by transiently altering their shape. HGA epitopes, identified with 2F4, JIM5 and JIM7 antibodies, and callose were immunolocalised in hand-made or semithin leaf sections. Callose was also stained with aniline blue. The structure of pavement cells was studied with light and transmission electron microscopy (TEM). In all species examined, pavement cells displayed wavy anticlinal cell walls, but the waviness pattern differed between angiosperms and ferns. The angiosperm pavement cells were tightly interconnected throughout their whole depth, while in ferns they were interconnected only close to the external periclinal cell wall and intercellular spaces were developed between them close to the mesophyll. Although the HGA epitopes examined were located along the whole cell wall surface, the 2F4- and JIM5- epitopes were especially localised at cell lobe tips. In fern pavement cells, the contact sites were impregnated with callose and JIM5-HGA epitopes. When tension forces were applied on leaf regions, the pavement cells elongated along the stretching axis, due to a decrease in waviness of anticlinal cell walls. After removal of tension forces, the original cell shape was resumed. The presented data support that HGA epitopes make the anticlinal pavement cell walls flexible, in order to reversibly alter their shape. Furthermore, callose seems to offer stability to cell contacts between pavement cells, as already suggested in photosynthetic mesophyll cells. © 2017 German Society for Plant Sciences and The Royal Botanical Society of the Netherlands.

Patton's tracks in the Mojave Desert, USA: An ecological legacy

USGS Publications Warehouse

Belnap, Jayne; Warren, Steven D.

2002-01-01

Recovery of soil properties from World War II-era military training exercises in the Mojave Desert was measured approximately 55 years following disturbance. Tracks from military vehicles were still visible, particularly in areas of desert pavement. Soil penetrability was much lower in visible tracks than outside the tracks. Soils in tracks had fewer rocks in the top 10cm of the soil profile than adjacent untracked soils. Larger particles (> 4.8mm) formed a moderately well-developed pavement outside of the tracks, while smaller, loose particles ( h 4.8mm) dominated the surface of the tracks. The time required to restore the desert pavement is likely to be measured in centuries. Based on biomass estimates, the cyanobacterial component of biological soil crusts had recovered 46-65% in tracks, compared to outside the tracks. Overall recovery of lichen cover has been much slower. Under plant canopies, cover of Collema tenax was not significantly different between areas inside and outside the tracks; however, recovery of Catapyrenium squamulosum was only 36%. In plant interspaces with less favorable moisture and temperature conditions, C. tenax showed a 6% recovery and C. squamulosum a 3% recovery. Assuming recovery of the biological soil crust is linear, and complete only when the most sensitive species (C. squamulosum) has fully recovered in the most limiting microhabitats (plant interspaces), it may require almost two millennia for full recovery of these areas.

Pavement smoothness indices : research brief.

DOT National Transportation Integrated Search

1998-08-01

Many in the asphalt industry believe that initial pavement smoothness directly relates to : pavement life. Public perception of smoothness is also important. Oregon is interested in : determining the appropriate method of measurement to quantify smoo...

Investigation of early distress in Wisconsin rubblized pavements.

DOT National Transportation Integrated Search

2011-07-01

This study investigated premature distress formation in Wisconsin HMA overlays of rubblized concrete pavement. The premature : distress was tented transverse cracking, which formed during the winter season and significantly affected pavement ride. Th...

Evaluation of pavement marking performance.

DOT National Transportation Integrated Search

2008-06-01

The objective of the investigation was to evaluate the useful life of pavement markings. The Manual on Uniform Traffic Control Devices (MUTCD) provides general guidelines for the application and installation of pavement markings. However, performance...

Training development for pavement preservation.

DOT National Transportation Integrated Search

2013-05-01

This research project strives to help the Iowa Department of Transportation (DOT) fully achieve the full benefits of pavement : preservation through training on proper selection, design, and application of pavement preservation treatments. In some ca...

Experimental flexible pavements.

DOT National Transportation Integrated Search

1971-01-01

A program of construction and the performance evaluation of three major Virginia experimental flexible pavements is reported. The objective of the program was to evaluate the performance of pavements incorporating new or timely design concepts and to...

Pavement scores synthesis.

DOT National Transportation Integrated Search

2009-02-01

The purpose of this synthesis was to summarize the use of pavement scores by the states, including the : rating methods used, the score scales, and descriptions; if the scores are used for recommending pavement : maintenance and rehabilitation action...

Development of reliable pavement models.

DOT National Transportation Integrated Search

2011-05-01

The current report proposes a framework for estimating the reliability of a given pavement structure as analyzed by : the Mechanistic-Empirical Pavement Design Guide (MEPDG). The methodology proposes using a previously fit : response surface, in plac...

Concrete pavement joint deterioration.

DOT National Transportation Integrated Search

2015-12-01

Concrete pavements are an important part of our national infrastructure. In recent years the relatively small number of reported joints deteriorating prematurely in concrete pavements around Indiana has increased. Changes over the past 45 years in IN...

Joint sealant materials for concrete pavement repairs.

DOT National Transportation Integrated Search

1991-01-01

This report on joint sealant materials for concrete pavement repairs is based on conversations with specialists from several states, the Federal Highway Administration, the Portland Cement Association, and the American Concrete Pavement Association, ...

Flexible pavement rehabilitation using pulverization.

DOT National Transportation Integrated Search

2008-06-01

Pulverization is a roadway rehabilitation strategy that involves in-place recycling of the entire existing flexible pavement layer and some of the existing granular base layer (Figure 1). Pavement pulverization provides an alternative to conventional...

Alternative pavements for snowmobile crossings.

DOT National Transportation Integrated Search

2009-09-01

Excessive highway pavement wear from snowmobile traffic is a maintenance problem for the New Hampshire Department of : Transportation. The snowmobiles and trail grooming equipment scar and erode the pavement surfaces, eventually creating wide ruts ac...

Pavement Remaining Service Interval [Tech Brief

DOT National Transportation Integrated Search

2013-05-01

This document is a technical summary of the Federal Highway Administration reports, "Reformulated Pavement Remaining Service Life Framework" (FHWA-HRT-13-038) and "Pavement Remaining Service Interval Implementation Guidelines" (FHWA-HRT-13-050). At t...

The Simulation Realization of Pavement Roughness in the Time Domain

NASA Astrophysics Data System (ADS)

XU, H. L.; He, L.; An, D.

2017-10-01

As the needs for the dynamic study on the vehicle-pavement system and the simulated vibration table test, how to simulate the pavement roughness actually is important guarantee for whether calculation and test can reflect the actual situation or not. Using the power spectral density function, the simulation of pavement roughness can be realized by Fourier inverse transform. The main idea of this method was that the spectrum amplitude and random phase were obtained separately according to the power spectrum, and then the simulation of pavement roughness was obtained in the time domain through the Fourier inverse transform (IFFT). In the process, the sampling interval (Δl) was 0.1m, and the sampling points(N) was 4096, which satisfied the accuracy requirements. Using this method, the simulate results of pavement roughness (A~H grades) were obtain in the time domain.

Assessment of technical condition of concrete pavement by the example of district road

NASA Astrophysics Data System (ADS)

Linek, M.; Nita, P.; Żebrowski, W.; Wolka, P.

2018-05-01

The article presents the comprehensive assessment of concrete pavement condition. Analyses included the district road located in the swietokrzyskie province, used for 11 years. Comparative analyses were conducted twice. The first analysis was carried out after 9 years of pavement operation, in 2015. In order to assess the extent of pavement degradation, the tests were repeated in 2017. Within the scope of field research, the traffic intensity within the analysed road section was determined. Visual assessment of pavement condition was conducted, according to the guidelines included in SOSN-B. Visual assessment can be extended by ground-penetrating radar measurements which allow to provide comprehensive assessment of the occurred structure changes within its entire thickness and length. The assessment included also performance parameters, i.e. pavement regularity, surface roughness and texture. Extension of test results by the assessment of changes in internal structure of concrete composite and structure observations by means of Scanning Electron Microscope allow for the assessment of parameters of internal structure of hardened concrete. Supplementing the observations of internal structure by means of computed tomography scan provides comprehensive information of possible discontinuities and composite structure. According to the analysis of the obtained results, conclusions concerning the analysed pavement condition were reached. It was determined that the pavement is distinguished by high performance parameters, its condition is good and it does not require any repairs. Maintenance treatment was suggested in order to extend the period of proper operation of the analysed pavement.

Difference in light-induced increase in ploidy level and cell size between adaxial and abaxial epidermal pavement cells of Phaseolus vulgaris primary leaves.

PubMed

Kinoshita, Isao; Sanbe, Akiko; Yokomura, E-iti

2008-01-01

Changes in nuclear DNA content and cell size of adaxial and abaxial epidermal pavement cells were investigated using bright light-induced leaf expansion of Phaseolus vulgaris plants. In primary leaves of bean plants grown under high (sunlight) or moderate (ML; photon flux density, 163 micromol m(-2) s(-1)) light, most adaxial epidermal pavement cells had a nucleus with the 4C amount of DNA, whereas most abaxial pavement cells had a 2C nucleus. In contrast, plants grown under low intensity white light (LL; 15 micromol m(-2) s(-1)) for 13 d, when cell proliferation of epidermal pavement cells had already finished, had a 2C nuclear DNA content in most adaxial pavement cells. When these LL-grown plants were transferred to ML, the increase in irradiance raised the frequency of 4C nuclei in adaxial but not in abaxial pavement cells within 4 d. On the other hand, the size of abaxial pavement cells increased by 53% within 4 d of transfer to ML and remained unchanged thereafter, whereas adaxial pavement cells continuously enlarged for 12 d. This suggests that the increase in adaxial cell size after 4 d is supported by the nuclear DNA doubling. The different responses between adaxial and abaxial epidermal cells were not induced by the different light intensity at both surfaces. It was shown that adaxial epidermal cells have a different property than abaxial ones.

Development of Probabilistic Rigid Pavement Design Methodologies for Military Airfields.

DTIC Science & Technology

1983-12-01

4A161102AT22, Task AO, Work Unit 009, "Methodology for Considering Material Variability in Pavement Design." OCE Project Monitor was Mr. S. S. Gillespie. The...PREFACE. .. ............................. VOLUME 1: STATE OF THE ART VARIABILITY OF AIRFIELD PAVEMENT MATERIALS VOLUME 11: MATHEMATICAL FORMULATION OF...VOLUME IV: PROBABILISTIC ANALYSIS OF RIGID AIRFIELD DESIGN BY ELASTIC LAYERED THEORY VOLUME I STATE OF THE ART VARIABILITY OF AIRFIELD PAVEMENT MATERIALS

Development and Evaluation of New Calibration Site, Tyndall AFB, for Continuous Friction Measurement Equipment

DTIC Science & Technology

2016-02-01

color images. The Air Force Civil Engineering Center (AFCEC) has been measuring military runway pavement friction and texture conditions around the...world for many years. In recent years, the friction measurements have been collected using seven GripTester (GT) trailers, and pavement texture...with several conclusions and recommendations are given as well as a list of appropriate references. pavement friction, calibration, pavement surface U U

Greenhouse Gas Emissions from Asphalt Pavement Construction: A Case Study in China

PubMed Central

Ma, Feng; Sha, Aimin; Lin, Ruiyu; Huang, Yue; Wang, Chao

2016-01-01

In China, the construction of asphalt pavement has a significant impact on the environment, and energy use and greenhouse gas (GHG) emissions from asphalt pavement construction have been receiving increasing attention in recent years. At present, there is no universal criterion for the evaluation of GHG emissions in asphalt pavement construction. This paper proposes to define the system boundaries for GHG emissions from asphalt pavement by using a process-based life cycle assessment method. A method for evaluating GHG emissions from asphalt pavement construction is suggested. The paper reports a case study of GHG emissions from a typical asphalt pavement construction project in China. The results show that the greenhouse gas emissions from the mixture mixing phase are the highest, and account for about 54% of the total amount. The second highest GHG emission phase is the production of raw materials. For GHG emissions of cement stabilized base/subbase, the production of raw materials emits the most, about 98%. The GHG emission for cement production alone is about 92%. The results indicate that any measures to reduce GHG emissions from asphalt pavement construction should be focused on the raw materials manufacturing stage. If the raw materials production phase is excluded, the measures to reduce GHG emissions should be aimed at the mixture mixing phase. PMID:27011196

Moisture Content Numerical Simulation on Structural Damage of Hot Mix Asphaltic Pavement

NASA Astrophysics Data System (ADS)

Abejide, O. S.; Mostafa, M. M. H.

2017-06-01

Considering the merits of road transportation in the economy and communication activities of the modern societies, it is imperative to design a safe, stable, efficient and cost effective road that will lead to increased economic development and growth of the South African nation. Although, the overarching effect of failed roads has in many ways led to increased travel time, loss of life and property; leading to reduced driver control on failed road sections (riding quality). Thus, time rate delamination of flexible pavement is a major focus of this study. Since structural collapse in a flexible pavement structure is caused by the evolution of different types of damage mechanisms; fatigue cracking, advanced crushing, temperature variation, and delamination. The effect of moisture content on HMA was analysed. The analysis from the multi-layered elastic model indicates that increase in moisture content in the underlying layer of HMA pavement results to increase in the strain of the individual layers and culminates to a decrease in the structural carrying capacity of the pavement with respect to number of load cycles that can be carried on the HMA pavement. This study shows a clear relationship between the moisture/saturation coefficient and the Elastic Modulus of the underlying geometric material layer properties of the pavement during the service life of the pavement.

Greenhouse Gas Emissions from Asphalt Pavement Construction: A Case Study in China.

PubMed

Ma, Feng; Sha, Aimin; Lin, Ruiyu; Huang, Yue; Wang, Chao

2016-03-22

In China, the construction of asphalt pavement has a significant impact on the environment, and energy use and greenhouse gas (GHG) emissions from asphalt pavement construction have been receiving increasing attention in recent years. At present, there is no universal criterion for the evaluation of GHG emissions in asphalt pavement construction. This paper proposes to define the system boundaries for GHG emissions from asphalt pavement by using a process-based life cycle assessment method. A method for evaluating GHG emissions from asphalt pavement construction is suggested. The paper reports a case study of GHG emissions from a typical asphalt pavement construction project in China. The results show that the greenhouse gas emissions from the mixture mixing phase are the highest, and account for about 54% of the total amount. The second highest GHG emission phase is the production of raw materials. For GHG emissions of cement stabilized base/subbase, the production of raw materials emits the most, about 98%. The GHG emission for cement production alone is about 92%. The results indicate that any measures to reduce GHG emissions from asphalt pavement construction should be focused on the raw materials manufacturing stage. If the raw materials production phase is excluded, the measures to reduce GHG emissions should be aimed at the mixture mixing phase.

Effects of studded tires on roadside airborne dust pollution in Niigata, Japan

NASA Astrophysics Data System (ADS)

Fukuzaki, Norio; Yanaka, Takaaki; Urushiyama, Yoshio

Two series of dust samples, collected by Andersen impactors (denoted by AN) and low-volume air samplers (denoted by LV), were investigated with respect to roadside airborne dusts collected in two different periods in 1983. These were the periods (i) with studded tires (February and March) and (ii) without studded tires (October). Multi-element determinations of these samples were made by neutron activation analysis and atomic absorption spectrometry. The total concentration of AN in roadside air for period (i) was about three times higher than for the period without studded tires. The lithophilic elements such as Na, Al, K, Ca, Ti, Fe and Th, and component-metal elements of stud tip, W and Ta, produced a significant increase in atmospheric concentration in winter. The contribution of pavement material, one of the most interesting components of airborne particles in this study, was related to total AN and LV by the chemical element balance method. It made up only 16 percent (9.1 μgm -3) of AN in October, compared with 46 percent (70.2 μgm -3) in February. It was also observed that the atmospheric concentrations of pavement debris to total LV decreased with the distance from the road to each sampling site.

A Research on Low Modulus Distributed Fiber Optical Sensor for Pavement Material Strain Monitoring

PubMed Central

Meng, Lingjian; Wang, Linbing; Hou, Yue; Yan, Guannan

2017-01-01

The accumulated irreversible deformation in pavement under repeated vehicle loadings will cause fatigue failure of asphalt concrete. It is necessary to monitor the mechanical response of pavement under load by using sensors. Previous studies have limitations in modulus accommodation between the sensor and asphalt pavement, and it is difficult to achieve the distributed monitoring goal. To solve these problems, a new type of low modulus distributed optical fiber sensor (DOFS) for asphalt pavement strain monitoring is fabricated. Laboratory experiments have proved the applicability and accuracy of the newly-designed sensor. This paper presents the results of the development. PMID:29048393

A Research on Low Modulus Distributed Fiber Optical Sensor for Pavement Material Strain Monitoring.

PubMed

Meng, Lingjian; Wang, Linbing; Hou, Yue; Yan, Guannan

2017-10-19

The accumulated irreversible deformation in pavement under repeated vehicle loadings will cause fatigue failure of asphalt concrete. It is necessary to monitor the mechanical response of pavement under load by using sensors. Previous studies have limitations in modulus accommodation between the sensor and asphalt pavement, and it is difficult to achieve the distributed monitoring goal. To solve these problems, a new type of low modulus distributed optical fiber sensor (DOFS) for asphalt pavement strain monitoring is fabricated. Laboratory experiments have proved the applicability and accuracy of the newly-designed sensor. This paper presents the results of the development.

Asphaltic concrete pavement survey.

DOT National Transportation Integrated Search

1963-04-01

The ever increasing problem of wheel path rutting and excessive desification of asphaltic concrete pavement has been the subject of asphalt technology for quite sometime. It is known that the density of the pavement, which is significant for several ...

Estimation of subgrade resilient modulus using the unconfined compression test.

DOT National Transportation Integrated Search

2014-11-01

To facilitate pavement design, the new proposed mechanistic-empirical pavement design guide recommends the resilient : modulus to characterize subgrade soil and its use for calculating pavement responses attributable to traffic and environmental : lo...

Ground penetrating radar (GPR) for pavement evaluation.

DOT National Transportation Integrated Search

2012-12-01

In the near future the Arkansas State Highway and Transportation Department Pavement Management System (PMS) will utilize a : Falling Weight Deflectometer (FWD) to collect network level pavement structural data to aid in predicting performance of pav...

The wearing characteristics of mineral aggregates in highway pavements.

DOT National Transportation Integrated Search

1970-01-01

Fifteen asphaltic concrete and seventeen portland cement concrete pavements located in Virginia were chosen for studies of aggregate wear and related wet pavement friction. Coarse aggregates from thirteen different geologic formations and quarry sour...

Long-Term Pavement Performance Automated Faulting Measurement

DOT National Transportation Integrated Search

2015-02-01

This study focused on identifying transverse joint locations on jointed plain concrete pavements using an automated joint detection algorithm and computing faulting at these locations using Long-Term Pavement Performance (LTPP) Program profile data c...

Operating the Portable Seismic Pavement Analyzer

DTIC Science & Technology

2006-12-01

8 Thickness versus modulus...amplitude versus time waveforms....................................................................... 9 Figure 10. A thickness versus Young’s modulus plot...modulus of portland cement concrete (PCC) and asphalt concrete (AC) pavements. Additional strength parameters necessary for structural pavement

Best practices and performance assessment for preventive maintenance treatments for Virginia pavements.

DOT National Transportation Integrated Search

2015-08-01

Preventive maintenance has the potential to improve network condition by retarding future pavement deterioration. This : report outlines guidelines for implementing a preventive maintenance policy for bituminous pavements. : Preventive maintenance tr...

Development of cost-effective pavement treatment selection and treatment performance models.

DOT National Transportation Integrated Search

2015-09-01

Louisiana Department of Transportation and Development (DOTD) has spent substantial financial resources on various : rehabilitation and maintenance treatments to minimize pavement distresses and improve pavement life. Such treatments : include, but a...

Field tack coat evaluator (ATACKer)

DOT National Transportation Integrated Search

2004-12-15

Asphalt tack coats are applied during pavement construction to ensure bond between pavement layers, thus providing a more durable pavement. A prototype tack coat evaluation device (TCED) was developed to evaluate the tensile and torque-shear strength...

Long-term infiltration capacity of different types of permeable pavements.

DOT National Transportation Integrated Search

2017-08-01

Permeable pavements such as porous asphalt, pervious concrete and permeable interlocking concrete pavers are relatively novel alternatives to conventional pavement that allow rain and snowmelt to infiltrate, thereby reducing runoff, flooding and nonp...

Sustainable concrete pavements : a manual of practice.

DOT National Transportation Integrated Search

2011-08-01

Developed as a more detailed follow-up to a 2009 briefing document, Building Sustainable Pavement with Concrete, this guide provides a clear, concise, and cohesive discussion of pavement sustainability concepts and of recommended practices for maximi...

Implementation of a pavement management system in Virginia.

DOT National Transportation Integrated Search

1987-01-01

The report summarizes the developments in pavement management in the Virginia Department of Transportation through late 1986. Included are discussions of the pavement management process with examples of priority programming, long-range projection of ...

Calibrating the mechanistic-empirical pavement design guide for Kansas.

DOT National Transportation Integrated Search

2015-04-01

The Kansas Department of Transportation (KDOT) is moving toward the implementation of the new American : Association of State Highway and Transportation Officials (AASHTO) Mechanistic-Empirical Pavement Design Guide (MEPDG) : for pavement design. The...

First year progress report on the development of the Texas flexible pavement database.

DOT National Transportation Integrated Search

2008-01-01

Comprehensive and reliable databases are essential for the development, validation, and calibration of any pavement : design and rehabilitation system. These databases should include material properties, pavement structural : characteristics, highway...

Assessment of asphalt concrete reinforcement grid in flexible pavements : final report.

DOT National Transportation Integrated Search

2016-05-01

This report investigated the application of accepted methods of pavement structural evaluation to independently assess the potential structural benefit of asphalt geogrid reinforcement of an operational flexible highway pavement. The asphalt interlay...

Estimating Cumulative Traffic Loads, Final Report for Phase 1

DOT National Transportation Integrated Search

2000-07-01

The knowledge of traffic loads is a prerequisite for the pavement analysis process, especially for the development of load-related distress prediction models. Furthermore, the emerging mechanistically based pavement performance models and pavement de...

Magnetic Tomography - Assessing Tie Bar and Dowel Bar Placement Accuracy

DOT National Transportation Integrated Search

2017-12-01

The Kansas Department of Transportation (KDOT) constructs portland cement concrete pavements (PCCP) for new highway expansions and/or for replacement of existing highway pavement using slip-form paving operations. Typical concrete pavement constructi...

Iowa calibration of MEPDG performance prediction models.

DOT National Transportation Integrated Search

2013-06-01

This study aims to improve the accuracy of AASHTO Mechanistic-Empirical Pavement Design Guide (MEPDG) pavement : performance predictions for Iowa pavement systems through local calibration of MEPDG prediction models. A total of 130 : representative p...

Mechanistic-empirical design concepts for continuously reinforced concrete pavements in Illinois.

DOT National Transportation Integrated Search

2009-04-01

The Illinois Department of Transportation (IDOT) currently has an existing jointed plain concrete pavement : (JPCP) design based on mechanistic-empirical (M-E) principles. However, their continuously reinforced concrete : pavement (CRCP) design proce...

Deterioration of jointed Portland cement concrete pavements.

DOT National Transportation Integrated Search

1975-01-01

Information has been gathered regarding the performance of more than 400 lane-miles of jointed PCC interstate pavements located in five construction districts in Virginia. The factors causing pavement deterioration have been identified, the processes...

Status report on pavement management.

DOT National Transportation Integrated Search

1984-01-01

This report traces the developments in pavement management in the Virginia Department of Highways and Transportation from the initial efforts in the mid-1970s through early 1984. Included are status reports on pavement management for the interstate, ...

Field tack coat evaluator (ATACKer).

DOT National Transportation Integrated Search

2004-12-14

Asphalt tack coats are applied during pavement construction to ensure bond between pavement layers, thus providing : a more durable pavement. A prototype tack coat evaluation device (TCED) was developed to evaluate the tensile and : torque-shear stre...

Retroreflectivity database study.

DOT National Transportation Integrated Search

2009-07-16

Pavement marking delineation is one method to provide positive driver guidance on all roadway types. There are a variety of pavement markings used by local and state transportation agencies in the United States. The type of pavement marking applied t...

Ground Penetrating Radar : Pavement Layer Thickness Evaluation

DOT National Transportation Integrated Search

2003-12-01

The following report demonstrates the accuracy of using Ground Penetrating Radar (GPR) to determine both the surface layer thickness for asphalt, and concrete pavements. In addition tests were conducted to identify GPR's repeatability on dry pavement...

Ground penetrating radar, pavement layer thickness evaluation

DOT National Transportation Integrated Search

2002-12-01

The following report demonstrates the accuracy of using Ground Penetrating Radar (GPR) to determine both the surface layer thickness for asphalt, and concrete pavements. In addition tests were conducted to identify GPR's repeatability on dry pavement...

Ground Penetrating Radar : Pavement Layer Thickness Evaluation

DOT National Transportation Integrated Search

2002-12-01

The following report demonstrates the accuracy of using Ground Penetrating Radar (GPR) to determine both the surface layer thickness for asphalt, and concrete pavements. In addition tests were conducted to identify GPR's repeatability on dry pavement...

Subsurface condition evaluation for asphalt pavement preservation treatments.

DOT National Transportation Integrated Search

2013-04-01

This report presents a case study on the SR70 section with microsurface for understanding its performance; a development of a : methodology for evaluating the asphalt pavement subsurface condition for applying pavement preservation treatments; and...

Effect of subsurface drainage on the structural capacity of flexible pavement.

DOT National Transportation Integrated Search

2005-01-01

Following the recommendation of the Virginia Transportation Research Council's Pavement Research Advisory Committee, this project was initiated to determine the effectiveness of including subsurface drainage systems in pavements in Virginia. The rese...

Evaluation of experimental flexible pavements : final report.

DOT National Transportation Integrated Search

1979-01-01

The construction and performance of seven Virginia flexible pavements containing at least some experimental features were evaluated. The objective was to evaluate the performance of the pavements incorporating new or timely design concepts and to ass...

Evaluation of rubblization project in Ohio : executive summary report.

DOT National Transportation Integrated Search

2011-03-01

Concrete pavements are highly susceptible to variations in temperature. During summer months, the concrete pavements expand and, contract during winter months. Such movements, particularly at the joints in concrete pavements during winter months, exe...

A pavement management research program for Oregon highways : final report.

DOT National Transportation Integrated Search

1989-12-01

An extensive program was developed to measure pavement deflection skid resistance, and rideability throughout Oregon. The data from those "objective" measures were then evaluated for correlations with observed pavement distress and traffic factors. :...

Evaluation of pavement surface friction treatments.

DOT National Transportation Integrated Search

2011-12-01

The implementation of a pavement preservation program involves a learning curve with not only a determination to succeed, but : also the courage to fail. Also, successful implementation of pavement preservation program requires knowledge of the perfo...

Environmental assessment of pavement infrastructure: A systematic review.

PubMed

Inyim, Peeraya; Pereyra, Jose; Bienvenu, Michael; Mostafavi, Ali

2016-07-01

Through a critical review and systematic analysis of pavement life cycle assessment (LCA) studies published over the past two decades, this study shows that the available information regarding the environmental impacts of pavement infrastructure is not sufficient to determine what pavement type is more environmentally sustainable. Limitations and uncertainties related to data, system boundary and functional unit definitions, consideration of use and maintenance phase impacts, are identified as the main reasons for inconsistency of reported results in pavement LCA studies. The study outcomes also highlight the need for advancement of knowledge pertaining to: (1) utilization of performance-adjusted functional units, (2) accurate estimation of use, maintenance, and end-of-life impacts, (3) incorporation of the dynamic and uncertain nature of pavement condition performance in impact assessment; (4) development of region-specific inventory data for impact estimation; and (5) consideration of a standard set of impact categories for comparison of environmental performance of different pavement types. Advancing the knowledge in these areas is critical in providing consistent and reliable results to inform decision-making toward more sustainable roadway infrastructure. Copyright © 2016 Elsevier Ltd. All rights reserved.

Thermal behavior of an asphalt pavement in the laboratory and in the parking lot.

PubMed

Martinkauppi, J B; Mäkiranta, A; Kiijärvi, J; Hiltunen, E

2015-01-01

The urban, constructed areas are full of buildings and different kinds of pavements and have a noticeable lack of trees and flora. These areas are accumulating the heat from the Sun, people, vehicles, and constructions. One interesting heat collector is the asphalt pavement. How does the heat transfer to different layers under the pavement or does it? What are the temperatures under the pavement in Finland where the winter can be pretty hard? How can those temperatures be measured accurately? These are the main questions this paper gives the preliminary answers to. First the thermal behavior of asphalt and the layers beneath are researched in the laboratory and then the measurement field is bored and dug in the parking in the Western coast of Finland, 63°5'45'' N. Distributed temperature sensing method was found to be a good choice for temperature measurements. Thermal behavior of pavement has been monitored in different layers and the preliminary results have been published here. The goal of this research is to assess the applicability of asphalt pavements for heat energy collection.

Thermal Behavior of an Asphalt Pavement in the Laboratory and in the Parking Lot

PubMed Central

Martinkauppi, J. B.; Mäkiranta, A.; Kiijärvi, J.; Hiltunen, E.

2015-01-01

The urban, constructed areas are full of buildings and different kinds of pavements and have a noticeable lack of trees and flora. These areas are accumulating the heat from the Sun, people, vehicles, and constructions. One interesting heat collector is the asphalt pavement. How does the heat transfer to different layers under the pavement or does it? What are the temperatures under the pavement in Finland where the winter can be pretty hard? How can those temperatures be measured accurately? These are the main questions this paper gives the preliminary answers to. First the thermal behavior of asphalt and the layers beneath are researched in the laboratory and then the measurement field is bored and dug in the parking in the Western coast of Finland, 63°5′45′′ N. Distributed temperature sensing method was found to be a good choice for temperature measurements. Thermal behavior of pavement has been monitored in different layers and the preliminary results have been published here. The goal of this research is to assess the applicability of asphalt pavements for heat energy collection. PMID:25861679

Study of a rehabilitated road using GPR and FWD

NASA Astrophysics Data System (ADS)

Marecos, Vania; Fontul, Simona; de Lurdes Antunes, Maria; Solla, Mercedes; Pajewski, Lara

2017-04-01

This work focus on the structural evaluation of a rehabilitated road after the conclusion of the first phase of the improvement works. The activities developed in the study comprised the characterization of the pavement layers condition (before the application of the asphalt surface layer) and the prediction of the pavement bearing capacity (taking into account the contribution of the wearing course, to be placed in accordance with the project specifications). For this study two non-destructive tests (NDT) were combined: Falling Weight Deflectometer (FWD) and Ground Penetrating Radar (GPR). The original pavement was essentially composed by a granular layer treated with a bituminous emulsion. The main objectives of the rehabilitation works were the enlargement of the road platform in selected locations, with the construction of a new pavement, and also the reinforcement of the existing pavement to increase its bearing capacity. The FWD tests were performed to assess the bearing capacity of the pavement and were conducted along the outer wheel path, in both directions. The spacing between measurement points was 75 m and the applied impulse load was 50 kN. The results showed a great variability of the deflections measured along the section under study. A preliminary zonation of the pavement was carried out, and was latter adjusted based on the results of the GPR. To determine the thickness of the pavement layers a GPR survey was carried out using a 1.8 GHz antenna and a radar control unit SIR-20, both from GSSI. The GPR tests were performed continuously along the same line as the FWD tests. The GPR tests allowed for the identification of the different structures of the pavement, corresponding to the zones with the new pavement and the existing pavement with reinforcement. Some cores were extracted to calibrate the thickness of the GPR bituminous layers, to verify the conditions of adhesion between layers and also to perform laboratory tests to characterize the bituminous mixtures. Test pits were also carried out to calibrate the GPR thickness for the granular layers. It was concluded that the areas with higher deflections coincided with the new pavement areas. The GPR results showed that in the existing reinforced pavement zones the total thickness of the reinforcement layers were higher than design values. On the other hand, for the new pavement zones, it was observed lower thicknesses for the base and sub-base layers and also for the binder layer, in comparison with the design values. The results of the laboratory tests carried out on samples of the bituminous mixtures showed that, in general, those mixtures had percentages of bitumen and porosities above the expected values. Based on the tests carried out, pavement response models were established and their predictable load capacity was estimated. This abstract is a contribution to COST Action TU1208 Civil Engineering Applications of Ground Penetrating Radar.

Selecting a preventive maintenance treatment for flexible pavements

DOT National Transportation Integrated Search

2000-06-14

Maintenance engineers have been applying treatments to both flexible and rigid pavements for as long as such pavements have existed. The types and application of various treatments for both corrective and preventive maintenance have been the subject ...

Pavement condition survey guide for city streets

DOT National Transportation Integrated Search

1994-06-01

The Pavement Condition Survey Guide for City Streets was developed to provide an easy, consistent means of assessing city street pavement conditions, both within a community and statewide. The guide includes an easy-to-use subjective condition rating...

Minimization of reflection cracks in flexible pavements.

DOT National Transportation Integrated Search

1977-01-01

This report describes the performance of fabrics used under overlays in an effort to minimize longitudinal and alligator cracking in flexible pavements. It is concluded, although the sample size is small, that the treatments will extend the pavement ...

Estimation of Asphalt Pavement Life

DOT National Transportation Integrated Search

2002-01-01

The milling of asphalt concrete (AC) pavement surface refers to the mechanical removal of a part of the pavement surface. The Kansas Department of Transportation (KDOT) and the Kansas Turnpike Authority (KTA) routinely mill the surfaces of some AC pa...

Assessment of stripped asphalt pavement.

DOT National Transportation Integrated Search

1989-01-01

Many miles of stripped pavement need to be restored to a serviceable condition, but there is no accepted procedure to determine whether the pavement should remain in place or be removed during the rehabilitation process. This report describes the att...

LTPP distress identification manual sets a standard for states

DOT National Transportation Integrated Search

2002-01-01

A brief note about the usefulness of the LTPP program's Distress Identification Manual in helping States with their pavement management and maintenance activities. Accurate reports of pavement conditions are crucial to pavement management and mainten...

Marginal Aggregates in Flexible Pavements: Field Evaluation

DOT National Transportation Integrated Search

1998-04-01

The purpose of this study was to evaluate the utilization of substandard or marginal aggregates in flexible pavement construction of airport pavements. This investigation was undertaken to evaluate the effects of using lower quality aggregates such a...

Quiet pavement systems in Europe

DOT National Transportation Integrated Search

2005-05-01

Noise pollution is a growing concern in the United States. A major contributor of highway noise is at the tire-pavement interface, which means that quieter pavements could lead to reductions in traffic-generated noise. The Federal Highway Administrat...

Monitoring and modeling of pavement response and performance : executive summary report.

DOT National Transportation Integrated Search

2010-06-01

Objective: : Over the years, the Ohio Department of Transportation has : constructed several pavements with a range of designs and : materials to study and improve overall statewide : performance. These pavements require constant monitoring : to dete...

Implementation of new pavement performance prediction models in PMIS : report

DOT National Transportation Integrated Search

2012-08-01

Pavement performance prediction models and maintenance and rehabilitation (M&R) optimization processes : enable managers and engineers to plan and prioritize pavement M&R activities in a cost-effective manner. : This report describes TxDOTs effort...

Evaluation of concrete pavements with materials-related distress : appendix G.

DOT National Transportation Integrated Search

2010-03-02

An evaluation of cores sampled from six concrete pavements was performed. Factors contributing to pavement distress observed in the field were determined, including expansive alkali-silica reactivity and freeze-thaw deterioration related to poor entr...

Long-Term Monitoring of Pavement Maintenance Materials Test Sites

DOT National Transportation Integrated Search

1998-06-01

The Strategic Highway Research Program's {SHRP) H-106 pothole repair experiment was part of the most extensive pavement maintenance experiment ever conducted. Started under SHRP and continued under the Long-Term Pavement Performance program's Long-Te...

Asphalt surface treatment practice in southeastern United States.

DOT National Transportation Integrated Search

2014-07-01

It costs less to maintain roads in good condition than in poor condition. Pavement preservation is a set of : activities to extend pavement life, improve safety, and meet road user expectations. Surface treatments are : pavement preservation treatmen...

An approach to pavement management in Virginia.

DOT National Transportation Integrated Search

1981-01-01

The report summarizes the objectives and benefits of formal pavement management systems and outlines an approach believed by the author to be practical for Virginia. The management of Virginia interstate pavements and a proposed random-sampling plan ...

Performance of a thirty-two year old concrete pavement

DOT National Transportation Integrated Search

1996-01-01

This report reviews pavement performance testing results on an experimental concrete pavement built on Minnesota T.H. 36 in 1958 that contains variations in joint spacing, reinforcement, dowels, and transverse joint fillers. South Dakota Profile Serv...

Investigation of image archiving for pavement surface distress survey

DOT National Transportation Integrated Search

1999-07-26

The categorization and quantification of the type, severity, and extent of pavement surface distress is a primary method for assessing pavement condition. The current data collection system in the Arkansas State Highway and Transportation Department ...

Implementation and local calibration of the MEPDG transfer functions in Wyoming.

DOT National Transportation Integrated Search

2015-11-01

The Wyoming Department of Transportation (WYDOT) currently uses the empirical AASHTO Design for Design of : Pavement Structures as their standard pavement design procedure. WYDOT plans to transition to the Mechanistic : Empirical Pavement Design Guid...

Mobile geographic information system solution for pavement condition surveys [summary].

DOT National Transportation Integrated Search

2012-01-01

The State Materials Office (SMO) of the Florida : Department of Transportation (FDOT) performs : annual Pavement Condition Surveys (PCS) of : the Departments extensive pavement network. : This work is performed by single-person crews in : inertial...

Evaluation of recycled concrete as aggregate in new concrete pavements.

DOT National Transportation Integrated Search

2014-04-01

This study evaluated the use of recycled concrete as coarse aggregate in new concrete pavements. : Recycled concrete aggregate (RCA) produced from demolished pavements in three geographically dispersed locations in Washington state were used to perfo...

Life Cycle Cost Analysis of Portland Cement Concrete Pavements

DOT National Transportation Integrated Search

1999-09-01

This report describes the development of a new life cycle cost analysis methodology for Portland cement concrete pavements - one that considers all aspects of pavement design, construction, maintenance, and user impacts throughout the analysis period...

Development of a Rolling Dynamic Deflectometer for Continuous Deflection Testing of Pavements

DOT National Transportation Integrated Search

1998-05-01

A rolling dynamic deflectometer (RDD) was developed as a nondestructive method for determining continuous deflection profiles of pavements. Unlike other commonly used pavement testing methods, the RDD performs continuous rather than discrete measurem...

2006 LTPP Product List

DOT National Transportation Integrated Search

2006-01-01

The Federal Highway Administration's (FHWA) Long-Term Pavement Performance (LTPP) program is a 20-year study of inservice pavements designed to provide the data required to understand how and why pavements perform the way they do. The U.S. Congress m...

Slipperiness of highway pavements : phase 1, final report.

DOT National Transportation Integrated Search

1971-01-01

To gain knowledge of the wet friction levels needed for various traffic conditions, this study evaluated the relationships between (1) accumulated traffic volumes and pavement friction, and (2) percent wet accidents and pavement friction. In addition...

Texas flexible pavements and overlays : year 5 report - complete data documentation.

DOT National Transportation Integrated Search

2017-05-01

Proper calibration and validation of pavement design and performance models to Texas conditions is : essential for cost-effective flexible pavement design, performance predictions, and maintenance/rehab : strategies. The veracity of the calibration o...

Software offers transparent, straightforward assessment of pavement additives : research spotlight.

DOT National Transportation Integrated Search

2015-04-01

Adding new materials to pavement layers is a proven technique to : improve performance. Many types of additivesfrom engineered : polymers and acids to recycled pavement, crumb rubber, shingles : and glasshave been used to help construct better ...

Traffic load spectra development for the 2002 AASHTO pavement design guide

DOT National Transportation Integrated Search

2004-12-30

Accurate knowledge of traffic volumes and loading is essential to structural pavement design and performance. Underestimation of design traffic can result in premature pavement failures and excessive rehabilitation costs. Overestimation can result in...

Recovery Act Home

Science.gov Websites

LAYING PAVEMENT Kirtland Air Force Base, N.M. - Workers lay new pavement to repair a parking lot . Slideshow 1 Slideshow 2 Kirtland Air Force Base, N.M. - Workers lay new pavement to repair a parking lot

AASHTO mechanistic-empirical pavement design guide parametric study.

DOT National Transportation Integrated Search

2012-03-01

This study focuses on assessing the robustness of the AASHTO Mechanistic-Empirical Pavement Design Guide (MEPDG v 1.1) for rigid pavement : design projects in Wisconsin. The primary tasks conducted in this study included performing sensitivity analys...

Draft user's guide for UDOT mechanistic-empirical pavement design.

DOT National Transportation Integrated Search

2009-10-01

Validation of the new AASHTO Mechanistic-Empirical Pavement Design Guides (MEPDG) nationally calibrated pavement distress and smoothness prediction models when applied under Utah conditions, and local calibration of the new hot-mix asphalt (HMA) p...

Calibrating the mechanistic-empirical pavement design guide for Kansas : [technical summary].

DOT National Transportation Integrated Search

2015-04-01

The Kansas Department of Transportation (KDOT) is moving toward the implementation : of the new American Association of State Highway and Transportation Officials : (AASHTO) Mechanistic-Empirical Pavement Design Guide (MEPDG) for pavement : design. T...

Effectiveness study on temporary pavement marking removals methods.

DOT National Transportation Integrated Search

2011-06-01

"This study was conducted to identify effective temporary marking removal methods and procedures on concrete and asphalt pavements. Pavement markings provide guidance to road travelers and can lead to accidents when not properly removed. Current stat...

Effectiveness study on temporary pavement marking removals methods.

DOT National Transportation Integrated Search

2011-06-01

This study was conducted to identify effective temporary marking removal methods and procedures on concrete and asphalt pavements. Pavement markings provide guidance to road travelers and can lead to accidents when not properly removed. Current state...

Evaluation of Pavement Safety Performance

DOT National Transportation Integrated Search

2015-02-01

The intent of this study was to isolate the effects of various low-cost pavement treatments on roadway safety. This was a retrospective study of pavement safety performance, looking back at crash data before and after treatments were installed. Both ...

Preliminary study to develop standard acceptance tests for pervious concrete.

DOT National Transportation Integrated Search

2017-05-01

Pervious concrete pavements are permeable pavement systems that are desired for their role in stormwater management and runoff control. Increased popularity in pervious concrete pavement applications has raised the need for the development of quality...

Improving the Acoustical Performance of Porous Asphalt Pavements

DOT National Transportation Integrated Search

1999-09-01

Selection of pavement for noise reduction considerations is becoming a major concern for those involved in highway construction within densely populated areas. However, the pavements available are designed for durability and safety reasons and not fo...

Reducing roughness in rehabilitated asphalt concrete (AC) pavements

DOT National Transportation Integrated Search

1998-12-01

A recently completed study entitled, "The Investigation of Development of Pavement Roughness" (FHWA-RD-97-147), initiated by the Long Term Pavement Performance (LTPP) program, provides an answer to the question of how much different rehabilitation tr...

Rumble strips installation on thin pavement overlays.

DOT National Transportation Integrated Search

2014-09-01

The purpose of this project was to establish a synthesis of best practices from various state and other transportation agency stakeholders regarding the installation and re-installation of rumble strips on pavements treated with a thin pavement overl...

Evaluation of concrete pavements with materials-related distress : final report.

DOT National Transportation Integrated Search

2010-03-02

An evaluation of cores sampled from six concrete pavements was performed. Factors : contributing to pavement distress observed in the field were determined, including expansive : alkali-silica reactivity and freeze-thaw deterioration related to poor ...

Evaluation of concrete pavements with materials-related distress : appendix F.

DOT National Transportation Integrated Search

2010-03-02

An evaluation of cores sampled from six concrete pavements was performed. Factors contributing to pavement distress observed in the field were determined, including expansive alkali-silica reactivity and freeze-thaw deterioration related to poor entr...

Evaluation of concrete pavements with materials-related distress : appendix E.

DOT National Transportation Integrated Search

2010-03-02

An evaluation of cores sampled from six concrete pavements was performed. Factors contributing to pavement distress observed in the field were determined, including expansive alkali-silica reactivity and freeze-thaw deterioration related to poor entr...

Evaluation of concrete pavements with materials-related distress : appendix D.

DOT National Transportation Integrated Search

2010-03-02

An evaluation of cores sampled from six concrete pavements was performed. Factors contributing to pavement distress observed in the field were determined, including expansive alkali-silica reactivity and freeze-thaw deterioration related to poor entr...

Evaluation of concrete pavements with materials-related distress : appendix B.

DOT National Transportation Integrated Search

2010-02-02

An evaluation of cores sampled from six concrete pavements was performed. Factors contributing to pavement distress observed in the field were determined, including expansive alkali-silica reactivity and freeze-thaw deterioration related to poor entr...

Effectiveness of noise barriers installed adjacent to transverse grooved concrete pavement.

DOT National Transportation Integrated Search

2009-10-16

In recent years the Ohio Department of Transportation (ODOT) has reconstructed a number of roadways where asphalt pavements were replaced with random transverse grooved concrete pavements. Upon completion, residents living adjacent to the reconstruct...

Evaluation of inlaid durable pavement markings in an Oregon snow zone.

DOT National Transportation Integrated Search

2006-04-01

The Oregon Department of Transportation (ODOT) evaluated the use of inlaid durable pavement markings within a snow zone. Three different durable pavement marking products were installed and evaluated: Dura-Stripe, a methyl methacrylate; Permaline...

Free draining base materials properties : final report.

DOT National Transportation Integrated Search

1992-03-01

The importance of providing a positive drainage system and removing free water from pavement structures has long been recognized. Inadequate drainage of the pavement structures has been identified as one of the primary causes of pavement distress. In...

Effect of friction on rolling tire-pavement interaction

DOT National Transportation Integrated Search

2010-11-01

In this research, a three-dimensional (3-D) tire-pavement interaction model is developed using FEM to analyze the tire-pavement contact stress distributions at various rolling conditions (free rolling, braking/accelerating, and cornering). In additio...

Evaluating all-weather pavement markings in Illinois : volume 1.

DOT National Transportation Integrated Search

2015-12-01

Pavement markings provide critical guidance to motorists, especially under dark (non-lighted) conditions. However, the : ability to see these pavement markings on a wet, rainy night is problematic given that the presence of water : considerably decre...

Long-term pavement performance indicators for failed materials.

DOT National Transportation Integrated Search

2016-04-01

State Transportation Agencies (STAs) use quality control/quality assurance (QC/QA) specifications to guide the testing and inspection of : road pavement construction. Although failed materials of pavement rarely occur in practice, it is critical to h...

Crackscope : automatic pavement cracking inspection system.

DOT National Transportation Integrated Search

2008-08-01

The CrackScope system is an automated pavement crack rating system consisting of a : digital line scan camera, laser-line illuminator, and proprietary crack detection and classification : software. CrackScope is able to perform real-time pavement ins...

Long-term pavement performance program manual for profile measurements and processing

DOT National Transportation Integrated Search

2008-11-01

This manual describes operational procedures for measuring longitudinal pavement profiles for the Long-Term Pavement Performance (LTPP) Program using the International Cybernetics Corporation (ICC) road profiler, Face Company Dipstick, and the rod an...

High performance concrete pavement in Indiana.

DOT National Transportation Integrated Search

2011-01-01

Until the early 1990s, curling and warping of Portland cement concrete pavement did not concern : pavement engineers in many transportation agencies. Since beginning construction of the interstate system in the : United States in the late 1950s throu...

Evaluation of pavement surface friction treatments : [technical summary].

DOT National Transportation Integrated Search

2011-01-01

The implementation of a pavement preservation program involves a learning curve with not only a determination to succeed, but also the courage to fail. Successful implementation of pavement preservation program requires knowledge of the performance o...

Pavement marking extensions for deceleration lanes.

DOT National Transportation Integrated Search

1974-01-01

Pavement markings have definite and important functions in a proper scheme of traffic control. One such marking, the pavement edge line, has received much favorable public reaction. One of the limitations of the edge line as conventionally applied is...

Evaluation of concrete pavements with materials-related distress : appendix C.

DOT National Transportation Integrated Search

2010-03-02

An evaluation of cores sampled from six concrete pavements was performed. Factors contributing to pavement distress observed in the field were determined, including expansive alkali-silica reactivity and freeze-thaw deterioration related to poor entr...

Nondestructive pavement evaluation using finite element analysis based soft computing models.

DOT National Transportation Integrated Search

2009-09-15

Evaluating structural condition of existing, in-service pavements constitutes annually a major part of the : maintenance and rehabilitation activities undertaken by State Highway Agencies (SHAs). Accurate : estimation of pavement geometry and layer m...

Designing Base and Subbase to Resist Environmental Effects on Pavements

DOT National Transportation Integrated Search

2018-02-02

MnDOTs current pavement thickness design procedures do not characterize the effects of subgrade soil frost susceptibility. Previous research indicates frost action is the most severe environmental factor on pavement performance. The most accepted ...

Comparison Of Rehabilitation Strategies For AC Pavements

DOT National Transportation Integrated Search

2000-11-01

This TechBrief summarizes the results of a study of the Specific Pavement Study 5 (SPS-5) experiment entitled, "Performance of Rehabilitated Asphalt Concrete Pavements in the LTPP Experiments--Data Collected Through February 1997." The study document...

Public perceptions of the Midwest's pavements : executive summary: Wisconsin.

DOT National Transportation Integrated Search

2001-01-01

The primary objective of the study was to seek systematic customer input to improve the Departments' pavement improvement policy by: determining how drivers perceive the Departments' pavements in terms of comfort and convenience and related tradeoffs...

A Knowledge-Base for Rehabilitation of Airfield Concrete Pavements

DTIC Science & Technology

1991-01-01

pavement engineer is located at a Major Command which oversees the operation of several Air Force bases. The five largest commands are the Strategic Air... Strategic Air Command (SAC) pavement engineer at Offutt AFB, NE 1980 - 1982: COE Materials & Concrete Division (MRD) Laboratory engineer 1976 - 1980...LaFrenz TITLE OR POSITION: Strategic Air Command Pavement Engineer PHONE: MAIL ADDRESS: HQ SAC/DEM Offutt AFB, NE YEARS IN CURRENT ASSIGNMENT: 2 EXPERIENCE

A basic guide to overlay design using nondestructive testing equipment data

NASA Astrophysics Data System (ADS)

Turner, Vernon R.

1990-08-01

The purpose of this paper is to provide a basic and concise guide to designing asphalt concrete (AC) overlays over existing AC pavements. The basis for these designs is deflection data obtained from nondestructive testing (NDT) equipment. This data is used in design procedures which produce required overlay thickness or an estimate of remaining pavement life. This guide enables one to design overlays or better monitor the designs being performed by others. This paper will discuss three types of NDT equipment, the Asphalt Institute Overlay Designs by Deflection Analysis and by the effective thickness method as well as a method of estimating remaining pavement life, correlations between NDT equipment and recent correlations in Washington State. Asphalt overlays provide one of the most cost effective methods of improving existing pavements. Asphalt overlays can be used to strengthen existing pavements, to reduce maintenance costs, to increase pavement life, to provide a smoother ride, and to improve skid resistance.

Influence of temperature on fatigue life or reinforced pavement by whitetopping

NASA Astrophysics Data System (ADS)

Szydło, A.; Mackiewicz, P.

2018-05-01

The article presents the influence of temperature on the fatigue strength of concrete slabs used for reinforcing susceptible flexible pavement. In Poland, so far, there is no research on thermal interactions on concrete pavement. The article presents an analysis of various climatic conditions occurring in Poland and temperature distribution in concrete pavement. The dependence of daily temperature fluctuations on the temperatures appearing in the concrete slab was demonstrated. An analysis of thermal stresses in concrete slabs depending on their parameters was shown, and then fatigue life was determined. The applied 3DFEM model includes elements of contact, friction, and gravity in order to better approximate the behaviour of the board from temperature change. On this basis, the significant influence of cyclical daily temperature changes on the durability of the concrete pavement was indicated. The presented analyses can be applied to reinforcements of existing flexible pavements.

Importance of dowels in transversal joints in concrete pavements

NASA Astrophysics Data System (ADS)

Grosek, Jiri; Chupik, Vladimir; Stryk, Josef; Brezina, Ilja

2017-09-01

Concrete pavements are designed for heavy loaded road structures. Their usage brings a number of specific issues. It is necessary to solve them all to ensure that concrete pavements will fulfil their function along the whole design period. One of these issues concerns dowels, which are located in transversal joints. Modelling of load, caused by heavy vehicles, with the use of the finite element method, provides valuable information about the stress condition of concrete pavement. The results of modelling can be verified by measurements or experiments in practice. Dowels and tie bars in jointed unreinforced concrete pavements and the importance of their correct placement, dimensions and material quality on pavement behaviour and lifespan were studied as a part of R&D projects of Technology Agency of the Czech Republic Nos. TA02031195 and TE01020168. The paper presents the experience from the modelling and performed experiments and makes conclusions which are important for the use in practice.

Accelerated pavement testing of low-volume paved roads with geocell reinforcement.

DOT National Transportation Integrated Search

2015-03-01

The Midwest States Accelerated Pavement Testing Pooled-Fund Program, financed by the highway : departments of Kansas, Iowa, Missouri, and New York, has supported an accelerated pavement testing (APT) project : to study the rehabilitation of low-volum...

Guidelines for rehabilitating flexible pavements.

DOT National Transportation Integrated Search

1986-01-01

The guidelines presented in this report are intended as an aid to the engineer in selecting the most appropriate type of pavement rehabilitation from those that are available. The basic types of distress in pavement surfaces and their causes are desc...

Testing and assessment of portable seismic property analyzer.

DOT National Transportation Integrated Search

2014-02-01

Investigator will thoroughly test and assess the Portable Seismic Property Analyzer (PSPA), a hand-held device that focuses on : pavement layer properties. The device can be utilized on both rigid and flexible pavements. When used on rigid pavements,...

Evaluating the effectiveness of performance based pavement marking maintenance contracts in Texas.

DOT National Transportation Integrated Search

2014-01-01

Performance-based pavement marking maintenance contracts (PBPMMCs) are one of the latest : mechanisms used to maintain adequate pavement marking performance levels. TxDOT has issued two : PBPMMCs, but the effectiveness of these contracts as compared ...

Improvement of Michigan climatic files in pavement ME design.

DOT National Transportation Integrated Search

2015-10-01

Climatic inputs have a great influence on Mechanistic-Empirical design results of flexible : and rigid pavements. Currently the state of Michigan has 24 climatic files embedded in Pavement ME : Design (PMED), but several limitations have been identif...

Fifteen year performance review of Michigan's European concrete pavement.

DOT National Transportation Integrated Search

2010-02-01

In 1993, a special pavement demonstration project was constructed in Detroit on NB I-75 to evaluate the design features of some highly acclaimed European rigid pavements. The Michigan Department of Transportation (MDOT) and the Federal Highway Admini...

Longevity of highway pavements in Illinois : 2000 update

DOT National Transportation Integrated Search

2002-12-01

Results of the latest round of pavement longevity studies in Illinois provide updated performance data through 2000 for HMAC, JRCP, : and CRCP new construction as well as AC overlays (first, second, and third overlays) of these original pavements. Th...

Implementation of the MEPDG for flexible pavements in Idaho.

DOT National Transportation Integrated Search

2012-05-01

This study was conducted to assist the Idaho Transportation Department (ITD) in the implementation of the Mechanistic-Empirical Pavement Design Guide (MEPDG) for flexible pavements. The main research work in this study focused on establishing a mater...

Guidelines for PCC inputs to AASHTOWare Pavement ME.

DOT National Transportation Integrated Search

2014-12-01

The objective of this research study was to develop guidelines for portland cement concrete (PCC) material inputs to the : AASHTOWare Pavement ME Design program. The AASHTOWare Pavement ME Design is the software program used by the : Mississippi Depa...

The evaluation of pavement patching materials in Oregon : final report.

DOT National Transportation Integrated Search

1980-11-01

This report describes the installation and evaluation of trial pavement patching materials in Oregon. The patches were placed in Portland cement concrete and bituminous concrete pavements and evaluated for periods ranging from four to twelve months. ...

Overlay design method based on visual pavement distress.

DOT National Transportation Integrated Search

1978-01-01

A method for designing the thickness of overlays for bituminous concrete pavements in Virginia is described. In this method the thickness is calculated by rating the amount and severity of observed pavement distress and determining the total accumula...

0-6687 : minimize premature distresses in continuously reinforced concrete pavement : [project summary].

DOT National Transportation Integrated Search

2013-08-01

The performance of continuously reinforced concrete : pavement (CRCP) has been quite satisfactory in Texas, : providing one of the most cost-effective pavement systems : for the Texas Department of Transportation (TxDOT). : However, distresses do occ...

Airport pavement marking evaluation for reducing runway incursion

DOT National Transportation Integrated Search

2001-02-01

This study was undertaken to evaluate the widening of airport pavement marking in order to enhance their recognition. Results of this evaluation are aimed at reducing the potential of runway incursions and incidents by making airports pavement markin...

Twenty year performance review of Michigan's European concrete pavement.

DOT National Transportation Integrated Search

2013-10-01

In 1993, a special pavement demonstration project was constructed in Detroit on NB I-75 to evaluate the design features of some highly acclaimed European rigid pavements. The Michigan Department of Transportation (MDOT) and the Federal Highway Admini...

Continuous real time measurement of pavement quality during construction.

DOT National Transportation Integrated Search

2010-12-01

Intelligent Compaction has been investigated as a means of improving the quality of asphalt pavements during their : construction. The long term performance of an asphalt pavement is directly related to its load bearing capability and : is determined...

Pavement performance evaluation, phase II : data collection.

DOT National Transportation Integrated Search

2008-12-01

Phase I and II of this study tested approximately 1500 rehabilitated pavements (asphalt and PCC) : throughout the State. These pavements ranged from 5 to 15 years old and were intended to develop a : snapshot of how various rehabilitations were perfo...

A pavement management research program for Oregon highways : interim report.

DOT National Transportation Integrated Search

1985-03-01

This is the first in a series of reports documenting progress on a statewide pavement management research project. The overall project is conducting research into pavement life cycles of different rehabilitation treatment; the cost-effectiveness of e...

Development of index based pavement performance models for pavement management system (PMS) of LADOTD.

DOT National Transportation Integrated Search

2009-03-01

This report focuses on pavement performance and treatment models for Louisiana Department of : Transportation and Development (LADOTD) and is in continuation of Louisiana Transportation : Research Center (LTRC) Report No. 430 Development of Unifor...

Recommendations for extending asphalt pavement surface life within Washington State.

DOT National Transportation Integrated Search

2016-10-01

This study identifies and evaluates hot mix asphalt (HMA) mix design and construction techniques with potential for improving WSDOT pavement surface life. WSDOT pavement failure mechanisms are found to be predominantly cracking. Rutting may reach a f...

A Summary of Pavement and Material-Related Databases within the Texas Department of Transportation

DOT National Transportation Integrated Search

1999-09-01

This report summarizes important content and operational details about five different materials and pavement databases currently used by the Texas Department of Transportation (TxDOT). These databases include the Pavement Management Information Syste...

The road to successful ITS software acquisition : executive summary

DOT National Transportation Integrated Search

1999-04-01

The Long Term Pavement Performance (LTPP) program was established to support a broad range of pavement performance analyses leading to improved engineering tools to design, construct, and manage pavements. Since 1989, LTPP has collected data on the p...

Accelerated testing for studying pavement design and performance (FY 2003) : research summary.

DOT National Transportation Integrated Search

2008-01-01

The Midwest States Accelerated Pavement Testing Pooled Fund Program, financed by : the highway departments of Missouri, Iowa, Kansas and Nebraska, has supported an : accelerated pavement testing (APT) project to compare the performance of stabilized ...

Demonstration of using quieter pavement in Death Valley National Park

DOT National Transportation Integrated Search

2013-06-01

Death Valley National Park provided an environment that allowed a demonstration of : quieter pavement use. Sound measurements near the tire-pavement interface, near the : road, and in areas of frequent human use were conducted and analyses performed ...

Performance of high RAP pavement sections in NH.

DOT National Transportation Integrated Search

2015-06-01

This report summarizes the University of New Hampshire (UNH) results of test pavements used to : determine the effect of using higher amounts of Recycled Asphalt Pavement (RAP) in Hot Mix Asphalt : (HMA). : The New Hampshire Department of Transportat...

A mechanistic-empirical approach for evaluating the effect of diamond grinding and thin overlay on predicted pavement performance.

DOT National Transportation Integrated Search

2016-04-01

Advancements in pavement management practice require evaluating the performance of pavement preservation treatments using performance-related characteristics. However, state highway agencies face the challenge of developing performance-based relation...

Reflective crack mitigation guide for flexible pavements.

DOT National Transportation Integrated Search

2015-09-01

Reflective cracks form in pavements when hot-mix asphalt (HMA) overlays are placed over jointed and/or severely cracked rigid : and flexible pavements. In the first part of the research, survival analysis was conducted to identify the most appropriat...

Evaluation of experimental flexible pavements : interim report no. 2.

DOT National Transportation Integrated Search

1975-01-01

A program of construction and performance evaluation of seven Virginia flexible pavements containing at least some experimental features is reported. The objective of the program is to evaluate the performance of the pavements incorporating new or ti...

Effect of drainage in unbound aggregate bases on flexible pavement performance.

DOT National Transportation Integrated Search

2008-05-01

It has been well demonstrated that a positive subsurface drainage is beneficial in enhancing pavement performance and thus extending pavement service life. Typical permeable base materials include asphalt/cement-treated, open-graded aggregates and un...

Laboratory fatigue evaluation of continuously fiber-reinforced concrete pavement.

DOT National Transportation Integrated Search

2013-09-01

Portland cement concrete (PCC) is the worlds most versatile construction material. PCC has : been in use in the United States for over 100 years. PCC pavement is generally constructed as : either continually reinforced concrete pavement (CRCP) or ...

Idaho AASHTOWare pavement ME design user's guide, version 1.1.

DOT National Transportation Integrated Search

2014-03-01

The AASHTOWare Pavement ME Design procedure is based on mechanistic-empirical (M-E) design concepts. This means that the design procedure calculates pavement responses such as stresses, strains, and deflections under axle loads and climatic condition...

Exploring ways to prevent bonding of ice to pavement.

DOT National Transportation Integrated Search

1998-01-01

The objective of this study was to explore all possible means of preventing ice from bonding to pavement. New technologies, including new chemicals, new means of application, pavement conditioning, and timing of chemical application, were explored. T...

TPADANA 2.0: draft user's manual of TPAD data analysis software.

DOT National Transportation Integrated Search

2016-08-01

The Total Pavement Acceptance Device (TPAD) is a continuous pavement deflection test : device. Since the device is designed for total acceptance of pavements, the researchers have : combined the deflection testing with Ground Penetrating Radar (GPR),...

Pavement marking demonstration projects : state of Alaska and state of Tennessee.

DOT National Transportation Integrated Search

2013-11-01

This project evaluates the safety impacts, environmental impacts, and cost effectiveness of different pavement marking : systems as well as the effect of State bidding and procurement processes on the quality of pavement marking material : employed i...

POROUS PAVEMENT. PHASE I. DESIGN AND OPERATIONAL CRITERIA

EPA Science Inventory

Design and operational criteria, utilization concepts, benefits and disadvantages, as well as other characteristics of porous pavements are presented in this report. Particular emphasis is placed on porous asphalt pavements, but the criteria and design approach are applicable to ...

23 CFR 973.104 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-04-01

... cost-effective pavement reconstruction, rehabilitation, and preventive maintenance programs and policies, and that results in pavement designed to accommodate current and forecasted traffic in a safe... goods to levels that meet Federal, State and local needs. Indian lands pavement management system (PMS...

23 CFR 973.104 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-04-01

... cost-effective pavement reconstruction, rehabilitation, and preventive maintenance programs and policies, and that results in pavement designed to accommodate current and forecasted traffic in a safe... goods to levels that meet Federal, State and local needs. Indian lands pavement management system (PMS...

23 CFR 971.104 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-04-01

.... Federal lands pavement management system (PMS) means a systematic process used by the FS, FWS, and NPS that provides information for use in implementing cost-effective pavement reconstruction, rehabilitation, and preventive maintenance programs and policies, and that results in pavement designed to...

23 CFR 970.104 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-04-01

... information for use in implementing cost-effective pavement reconstruction, rehabilitation, and preventive maintenance programs and policies, and that results in pavement designed to accommodate current and forecasted....C. 204 to address transportation needs of Federal and Indian lands. Federal lands pavement...

Permeable Pavement Research at the Edison Environmental Center

EPA Science Inventory

There are few detailed studies of full-scale, replicated, actively-used permeable pavement systems. Practitioners need additional studies of permeable pavement systems in its intended application (parking lot, roadway, etc.) across a range of climatic events, daily usage conditio...

23 CFR 970.104 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-04-01

... information for use in implementing cost-effective pavement reconstruction, rehabilitation, and preventive maintenance programs and policies, and that results in pavement designed to accommodate current and forecasted....C. 204 to address transportation needs of Federal and Indian lands. Federal lands pavement...

23 CFR 970.104 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-04-01

... information for use in implementing cost-effective pavement reconstruction, rehabilitation, and preventive maintenance programs and policies, and that results in pavement designed to accommodate current and forecasted....C. 204 to address transportation needs of Federal and Indian lands. Federal lands pavement...

23 CFR 970.104 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-04-01

... information for use in implementing cost-effective pavement reconstruction, rehabilitation, and preventive maintenance programs and policies, and that results in pavement designed to accommodate current and forecasted....C. 204 to address transportation needs of Federal and Indian lands. Federal lands pavement...

23 CFR 973.104 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-04-01

... cost-effective pavement reconstruction, rehabilitation, and preventive maintenance programs and policies, and that results in pavement designed to accommodate current and forecasted traffic in a safe... goods to levels that meet Federal, State and local needs. Indian lands pavement management system (PMS...

23 CFR 971.104 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-04-01

.... Federal lands pavement management system (PMS) means a systematic process used by the FS, FWS, and NPS that provides information for use in implementing cost-effective pavement reconstruction, rehabilitation, and preventive maintenance programs and policies, and that results in pavement designed to...

23 CFR 973.104 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-04-01

... cost-effective pavement reconstruction, rehabilitation, and preventive maintenance programs and policies, and that results in pavement designed to accommodate current and forecasted traffic in a safe... goods to levels that meet Federal, State and local needs. Indian lands pavement management system (PMS...

Evaluation of flexible pavement performance using LTPP data.

DOT National Transportation Integrated Search

2002-07-01

Pavements are complicated physical structures responding in a complex way to : the influence of many variables. Understanding how the long-term performance of : pavement: relates to the factors such as environmental and traffic loads is key to : buil...

23 CFR 971.104 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-04-01

.... Federal lands pavement management system (PMS) means a systematic process used by the FS, FWS, and NPS that provides information for use in implementing cost-effective pavement reconstruction, rehabilitation, and preventive maintenance programs and policies, and that results in pavement designed to...

23 CFR 970.104 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-04-01

... information for use in implementing cost-effective pavement reconstruction, rehabilitation, and preventive maintenance programs and policies, and that results in pavement designed to accommodate current and forecasted....C. 204 to address transportation needs of Federal and Indian lands. Federal lands pavement...

23 CFR 973.104 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-04-01

... cost-effective pavement reconstruction, rehabilitation, and preventive maintenance programs and policies, and that results in pavement designed to accommodate current and forecasted traffic in a safe... goods to levels that meet Federal, State and local needs. Indian lands pavement management system (PMS...

23 CFR 971.104 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-04-01

.... Federal lands pavement management system (PMS) means a systematic process used by the FS, FWS, and NPS that provides information for use in implementing cost-effective pavement reconstruction, rehabilitation, and preventive maintenance programs and policies, and that results in pavement designed to...

Quantifying Evaporation in a Permeable Pavement System

EPA Science Inventory

Studies quantifying evaporation from permeable pavement systems are limited to a few laboratory studies and one field application. This research quantifies evaporation for a larger-scale field application by measuring the water balance from lined permeable pavement sections. Th...

23 CFR 971.104 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-04-01

.... Federal lands pavement management system (PMS) means a systematic process used by the FS, FWS, and NPS that provides information for use in implementing cost-effective pavement reconstruction, rehabilitation, and preventive maintenance programs and policies, and that results in pavement designed to...

Profile analysis of the LTPP SPS-6 site in Arizona.

DOT National Transportation Integrated Search

2010-07-01

"This report characterizes the longitudinal profiles of five pavement sections within the Arizona Specific : Pavement Studies 6 project throughout their service life. This project was built and monitored as part of : the Long-Term Pavement Performanc...

A Study Of In-Place Rutting Of Asphalt Pavements

DOT National Transportation Integrated Search

1989-01-01

The objective of this study was to evaluate in-place pavements experiencing rutting and pavements experiencing no rutting to begin to classify asphalt mixtures that should perform satisfactorily and those that would likely rut under traffic. The info...

Use of Falling Weight Deflectometer Data for Assessing Pavement Structural Evaluation Values

DOT National Transportation Integrated Search

1999-09-01

Structural evaluation can be very useful at the network level for project prioritization purposes. In the project priority ranking procedure of the Kansas Department of Transportation (KDOT), a pavement rating attribute, Pavement Structural Evaluatio...

Development of Pavement Performance Prediction Models for Preservation Treatments : Volume 2

DOT National Transportation Integrated Search

2018-04-01

The implementation of a pavement preservation program was initiated in Fiscal Year (FY) 2005 at the Illinois Department of Transportation (IDOT) by appropriating funding for four specific pavement preservation treatments. The types of treatments incl...

Density measurement verification for hot mixed asphalt concrete pavement construction.

DOT National Transportation Integrated Search

2010-06-01

Oregon Department of Transportation (ODOT) requires a minimum density for the construction of dense-graded hot mix asphalt concrete (HMAC) pavements to ensure the likelihood that the pavement will not experience distresses that reduce the expected se...

Density measurement verification for hot mix asphalt concrete pavement construction.

DOT National Transportation Integrated Search

2010-06-01

Oregon Department of Transportation (ODOT) requires a minimum density for the construction of dense-graded hot mix asphalt concrete (HMAC) pavements to ensure the likelihood that the pavement will not experience distresses that reduce the expected se...

Performance and cost effectiveness of permeable friction course (PFC) pavements.

DOT National Transportation Integrated Search

2013-02-01

In this project, the research team evaluated the performance of Permeable Friction Courses (PFC) over time and compared it against other types of wearing surface pavement layers. Several pavement sections including Asphalt Rubber (AR) PFCs, Performan...

Pavement management system for City of Madison : research brief.

DOT National Transportation Integrated Search

2016-11-01

In this study, a complete pavement management system (PMS) was created and implemented in : Madison, SD. The system consists of a street geodatabase, development of pavement performance : models and maintenance & rehabilitation (M&R) plans. The PMS d...

Performance studies of continuously reinforced concrete pavement : pavements without transverse steel.

DOT National Transportation Integrated Search

1972-01-01

The status of studies of the three continuously reinforced pavement projects near Charlottesville is reported. Of particular interest in these studies are the effects of the elimination of transverse reinforcing steel, the changing characteristics of...

Wet night visibility of pavement markings.

DOT National Transportation Integrated Search

2004-01-01

This report describes an investigation into the performance of pavement markings in wet night conditions. The performance of a typical pavement marking will degrade when it gets wet. This is a result of the flooding of the marking optics, thereby red...

Classification of Features of Pavement Profiles Using Empirical Mode Decomposition

DOT National Transportation Integrated Search

2014-12-01

The Long-Term Pavement Performance (LTPP) database contains surface profile data for numerous pavements that are used mainly for computing International Roughness Index (IRI).(2) In order to obtain more information from these surface profiles, a Hilb...

Evaluation of microcracking and chemical deterioration in concrete pavements.

DOT National Transportation Integrated Search

1995-10-31

The major objective of this research project was to investigate the : chemistry and morphology of portland cement concrete pavements in : Iowa. The integrity of the various pavements was evaluated qualitatively, : based on the presence or absence of ...

Evaluation of concrete pavements with materials-related distress : appendix A, part 1.

DOT National Transportation Integrated Search

2010-03-02

An evaluation of cores sampled from six concrete pavements was performed. Factors contributing to pavement distress observed in the field were determined, including expansive alkali-silica reactivity and freeze-thaw deterioration related to poor entr...

Evaluation of concrete pavements with materials-related distress : appendix A, part 3.

DOT National Transportation Integrated Search

2010-03-02

An evaluation of cores sampled from six concrete pavements was performed. Factors contributing to pavement distress observed in the field were determined, including expansive alkali-silica reactivity and freeze-thaw deterioration related to poor entr...

Evaluation of concrete pavements with materials-related distress : appendix A, part 2.

DOT National Transportation Integrated Search

2010-03-02

An evaluation of cores sampled from six concrete pavements was performed. Factors contributing to pavement distress observed in the field were determined, including expansive alkali-silica reactivity and freeze-thaw deterioration related to poor entr...

Predicting low-temperature cracking in asphalt pavements : [research brief].

DOT National Transportation Integrated Search

2011-12-01

In Wisconsin's winter climate, low temperatures can cause asphalt pavements to contract and crack, reducing their ride quality and service lives. To help engineers more accurately determine how well certain pavement designs will fare in such conditio...

Implementation and thickness optimization of perpetual pavements in Ohio.

DOT National Transportation Integrated Search

2015-06-01

This report documents the performance of perpetual pavement structures constructed by the Ohio Department of Transportation. : Three perpetual pavement test sections on U.S. Route 23 in Delaware, Ohio (DEL-23) were constructed with AC thicknesses 11 ...

Application and Validation of Remaining Service Interval Framework for Pavements

DOT National Transportation Integrated Search

2016-10-01

The pavement remaining service interval (RSI) terminology was developed to remove confusion caused by the multitude of meanings assigned to the various forms of pavement remaining service life (RSL). The RSI concept considers the complete maintenance...

Flexible and composite structures for premium pavements. Volume 2, Design manual

DOT National Transportation Integrated Search

1980-11-01

This design manual presents the results of a detailed study to identify and design flexible and composite pavement configurations which will perform as premium or "zero-maintenance" pavements. This manual includes identification and classification of...

I-81 in-place pavement recycling project.

DOT National Transportation Integrated Search

2014-08-01

During the 2011 construction season, the Virginia Department of Transportation (VDOT) completed an in-place pavement : recycling project to rehabilitate a section of pavement on I-81 near Staunton, Virginia. The project consisted of a 3.66-mile : sec...

Rubblization and base overlay of FM 912 and FM 1155.

DOT National Transportation Integrated Search

2010-01-01

In many instances rubblization may be a good option to convert a deteriorated concrete pavement into a : flexible pavement structure. In this project, the Texas Department of Transportation conducted rubblization : on portions of a concrete pavement ...

Monitoring and modeling of pavement response and performance : task A, Ohio.

DOT National Transportation Integrated Search

2010-06-01

Over the years, the Ohio Department of Transportation has constructed several pavements with a range of : designs and materials to study and improve overall statewide performance. These pavements require constant : monitoring to determine how they pe...

Evaluation of Asphalt Pavement Analyzer for HMA Design

DOT National Transportation Integrated Search

1999-06-01

Rutting is a common problem in hot mix asphalt pavements, particularly in hot climates and at intersections. The Asphalt Pavement Analyzer (APA) is a laboratory accelerated loading equipment that can be used to evaluate rutting potential of HMA. This...