Improving quality through performance-based financing in district hospitals in Rwanda between 2006 and 2010: a 5-year experience.

PubMed

Janssen, Willy; Ngirabega, Jean de Dieu; Matungwa, Michel; Van Bastelaere, Stefaan

2015-01-01

Since 2000 performance-based financing (PBF) made its way to sub-Saharan health systems in an attempt to improve service delivery. In Rwanda initial experiences in 2001 and 2002 led to a scaling up of the initiative to all health centres (HC) and district hospitals (DH). In 2008 PBF became national strategy. PBF was introduced in Rwanda in 2006 at the DH level. Evaluation on their service delivery was carried out quarterly in the following areas: hospital management, support to the health centres and clinical activities. We studied four DHs. After 5 years, an improvement in the quantity of clinical activities was observed, as well as quality in hospital management, in HC support and in clinical activities. PBF proves to be a promising approach in strengthening and maintaining quality service delivery in the sub-Saharan district hospitals. © The Author(s) 2014 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

Effects of photoperiod on wheat growth, development and yield in CELSS

NASA Astrophysics Data System (ADS)

Yunze, Shen; Shuangsheng, Guo

2014-12-01

A Controlled Ecological Life Support System (CELSS) is a sealed system used in spaceflight in order to provide astronauts with food and O2 by plants. It is of great significance to increase the energy-using efficiency because energy is extremely deficient in the space. Therefore, the objective of this research was to increase the energy-using efficiency of wheat by regulating the photoperiod. Sixteen treatments were set in total: four photoperiods before flowering (PBF) combined with four photoperiods after flowering (PAF) of 12 h, 16 h, 20 h and 24 h. The light source was red-blue LED (90% red+10% blue). As a result, the growth period of wheat was largely extended by shorter PBF, particularly the number of days from tillering to jointing and from jointing to heading. The period from flowering to maturity was extended by shorter PAF. Shorter PBF and longer PAF could increase not only the yield but also the energy-using efficiency of wheat. As for the nutritional quality, longer photoperiod (both PBF and PAF) increased starch concentration as well as decreased protein concentration of seeds. The effects of PBF and PAF were interactional. The lighting strategy with PBF of 12 h and PAF of 24 h was proved to be the optimum photoperiod for wheat cultivation in CELSS. The mechanisms of photoperiod effect contain two aspects. Firstly, photoperiod is a signal for many processes in plant growth, particularly the process of ear differentiation. Shorter PBF promoted the ear differentiation of wheat, increasing the spikelet number, floret number and seed number and thus enhancing the yield. Secondly, longer photoperiod leads to more light energy input and longer time of photosynthesis, so that longer PAF provided more photosynthate and increased seed yield.

Interrelationships between BMI, skinfold thicknesses, percent body fat, and cardiovascular disease risk factors among U.S. children and adolescents.

PubMed

Freedman, David S; Ogden, Cynthia L; Kit, Brian K

2015-11-18

Although the estimation of body fatness by Slaughter skinfold thickness equations (PBF(Slaughter)) has been widely used, the accuracy of this method is uncertain. We have previously examined the interrelationships among the body mass index (BMI), PBF(Slaughter), percent body fat from dual energy X-ray absorptiometry (PBF(DXA)) and CVD risk factor levels among children who were examined in the Bogalusa Heart Study and in the Pediatric Rosetta Body Composition Project. The current analyses examine these associations among 7599 8- to 19-year-olds who participated in the (U.S.) National Health and Nutrition Examination Survey from 1999 to 2004. We analyzed (1) the agreement between (1) estimates of percent body fat calculated from the Slaughter skinfold thickness equations and from DXA, and (2) the relation of lipid, lipoprotein, and blood pressure levels to BMI, PBF(Slaughter) and PBF(DXA). PBF(Slaughter) was highly correlated (r ~ 0.85) with PBF(DXA). However, among children with a relatively low skinfold thicknesses sum (triceps + subscapular), PBF(Slaughter) underestimated PBF(DXA) by 8 to 9 percentage points. In contrast, PBF(Slaughter) overestimated PBF(DXA) by 10 points among boys with a skinfold thickness sum ≥ 50 mm. After adjustment for sex and age, lipid levels were related similarly to the body mass index, PBF(DXA) and PBF(Slaughter). There were, however, small differences in associations with blood pressure levels: systolic blood pressure was more strongly associated with body mass index, but diastolic blood pressure was more strongly associated with percent body fat. The Slaughter equations yield biased estimates of body fatness. In general, lipid and blood pressure levels are related similarly to levels of BMI (following adjustment for sex and age), PBF(Slaughter,) and PBF(DXA).

Tracking Global Fund HIV/AIDS resources used for sexual and reproductive health service integration: case study from Ethiopia.

PubMed

Mookherji, Sangeeta; Ski, Samantha; Huntington, Dale

2015-05-27

The Global Fund to Fight AIDS, Tuberculosis & Malaria (GF) strives for high value for money, encouraging countries to integrate synergistic services and systems strengthening to maximize investments. The GF needs to show how, and how much, its grants support more than just HIV/AIDS, TB and malaria. Sexual and Reproductive Health (SRH) has been part of HIV/AIDS grants since 2007. Previous studies showed the GF PBF system does not allow resource tracking for SRH integration within HIV/AIDS grants. We present findings from a resource tracking case study using primary data collected at country level. Ethiopia was the study site. We reviewed data from four HIV/AIDS grants from January 2009-June 2011 and categorized SDAs and activities as directly, indirectly, or not related to SRH integration. Data included: GF PBF data; financial, performance, in-depth interview and facility observation data from Ethiopia. All HIV/AIDS grants in Ethiopia support SRH integration activities (12-100%). Using activities within SDAs, expenditures directly supporting SRH integration increased from 25% to 66% for the largest HIV/AIDS grant, and from 21% to 34% for the smaller PMTCT-focused grant. Using SDAs to categorize expenditures underestimated direct investments in SRH integration; activity-based categorization is more accurate. The important finding is that primary data collection could not resolve the limitations in using GF GPR data for resource tracking. The remedy is to require existing activity-based budgets and expenditure reports as part of PBF reporting requirements, and make them available in the grant portfolio database. The GF should do this quickly, as it is a serious shortfall in the GF guiding principle of transparency. Showing high value for money is important for maximizing impact and replenishments. The Global Fund should routinely track HIV/AIDs grant expenditures to disease control, service integration, and overall health systems strengthening. The current PBF system will not allow this. Real-time expenditure analysis could be achieved by integrating existing activity-based financial data into the routine PBF system. The GF's New Funding Model and the 2012-2016 strategy present good opportunities for over-hauling the PBF system to improve transparency and allow the GF to monitor and maximize value for money.

Performance-based financing contributes to the resilience of health services affected by the Liberian Ebola outbreak

PubMed Central

Mapleh, L.; Ade, S.; Harries, A. D.; Bhat, P.; Kateh, F.; Dahn, B.

2017-01-01

Setting: The Liberian counties of Bong, with performance-based financing (PBF) for all 36 public primary-care facilities, and Margibi, with no PBF for its 24 public primary-care facilities. Objective: To compare whether specific maternal and child health indicators changed in the two counties during the pre-Ebola (2013), Ebola (2014) and post-Ebola (2015) disease outbreak periods from July to September each year. Design: This was a cross-sectional study. Results: For pregnant women, the numbers of antenatal visits, intermittent preventive malaria treatments, human immunodeficiency virus (HIV) tests and facility-based births with skilled attendants all fell during the Ebola period, with decreases being significantly more marked in Margibi County. Apart from HIV testing, which remained low in both counties, these indicators increased in the post-Ebola period, with increases significantly more marked in Bong than in Margibi. The number of childhood immunisations decreased significantly in Bong in the Ebola period compared with the pre-Ebola period, but increased to above pre-Ebola levels in the post-Ebola period. There were markedly larger decreases in childhood immunisations in Margibi County during the Ebola period, which remained significantly lower in the post-Ebola period compared with Bong County. Conclusion: In a PBF-supported county, selected maternal and childhood health indicators showed less deterioration during Ebola and better recovery post-Ebola than in a non-PBF-supported county. PMID:28744447

Performance-based financing contributes to the resilience of health services affected by the Liberian Ebola outbreak.

PubMed

Mussah, V G; Mapleh, L; Ade, S; Harries, A D; Bhat, P; Kateh, F; Dahn, B

2017-06-21

Setting: The Liberian counties of Bong, with performance-based financing (PBF) for all 36 public primary-care facilities, and Margibi, with no PBF for its 24 public primary-care facilities. Objective: To compare whether specific maternal and child health indicators changed in the two counties during the pre-Ebola (2013), Ebola (2014) and post-Ebola (2015) disease outbreak periods from July to September each year. Design: This was a cross-sectional study. Results: For pregnant women, the numbers of antenatal visits, intermittent preventive malaria treatments, human immunodeficiency virus (HIV) tests and facility-based births with skilled attendants all fell during the Ebola period, with decreases being significantly more marked in Margibi County. Apart from HIV testing, which remained low in both counties, these indicators increased in the post-Ebola period, with increases significantly more marked in Bong than in Margibi. The number of childhood immunisations decreased significantly in Bong in the Ebola period compared with the pre-Ebola period, but increased to above pre-Ebola levels in the post-Ebola period. There were markedly larger decreases in childhood immunisations in Margibi County during the Ebola period, which remained significantly lower in the post-Ebola period compared with Bong County. Conclusion: In a PBF-supported county, selected maternal and childhood health indicators showed less deterioration during Ebola and better recovery post-Ebola than in a non-PBF-supported county.

Social Factors Associated with Non-initiation and Cessation of Predominant Breastfeeding in a Mother-Child Cohort in Spain.

PubMed

Villar, Maria; Santa-Marina, Loreto; Murcia, Mario; Amiano, Pilar; Gimeno, Silvia; Ballester, Ferran; Julvez, Jordi; Romaguera, Dora; Fernández-Somoano, Ana; Tardón, Adonina; Ibarluzea, Jesús

2018-05-01

Objective The aim of the study was to identify factors associated with non-initiation and cessation of predominant breastfeeding (PBF) in a mother-child cohort from Spain. Materials and Methods The analysis included 2195 mother-infant from birth to 14 months post- delivery recruited between 2004 and 2008. Maternal characteristics were collected during the pregnancy. Lactation data were obtained at 6 and 14 months after delivery. PBF was defined as intake of breast milk plus liquids like juices or water. The PBF cessation was calculated using the date that women started PBF and the date that she reported to start giving infant formula and/or food. The relationship between maternal variables and PBF initiation and cessation was modeled using logistic and Cox proportional hazards regression analysis. Results The prevalence of PBF at hospital discharge was 85.3, 53.4% at 3 months, 46.1% at 4 months and 7.2% at 6 month. Only two women continued PBF at 12 months and none at 14 months. The initiating of PBF was associated with higher levels of maternal education, being a first-time mother and worked in a non-manual occupation. Higher level of physical activity, not smoking and having a healthy BMI, were also positively associated with PBF initiation. PBF cessation was higher in young, obese women, who had had complications during the pregnancy, and who had lower levels of education and smoked. The employment status of women, in week 32 of pregnancy and also in month 14 post-delivery, determined likelihood of PBF cessation. Conclusions Healthier habits and education positively influenced PBF initiation and duration. Decrease in PBF duration rates in Spain can be interpreted in part as a consequence of women returning to work.

PBF Reactor Building (PER620). PBF crane holds fuel test assembly ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF Reactor Building (PER-620). PBF crane holds fuel test assembly aloft prior to lowering into reactor for test. Date: 1982. INEEL negative no. 82-4909 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

PBF. Oblique and contextual view of PBF Cooling Tower, PER720. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF. Oblique and contextual view of PBF Cooling Tower, PER-720. Camera facing northeast. Auxiliary Building (PER-624) abuts Cooling Tower. Demolition equipment has arrived. Date: August 2003. INEEL negative no. HD-35-11-2 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

Performance-based financing in low-income and middle-income countries: isn’t it time for a rethink?

PubMed Central

Albert, Lucien; Bisala, Badibanga N’Sambuka; Bodson, Oriane; Bonnet, Emmanuel; Bossyns, Paul; Colombo, Sandro; De Brouwere, Vincent; Dumont, Alexandre; Eclou, Dieudonné Sèdjro; Gyselinck, Karel; Hane, Fatoumata; Marchal, Bruno; Meloni, Remo; Noirhomme, Mathieu; Noterman, Jean-Pierre; Samb, Oumar Mallé; Ssengooba, Freddie; Touré, Laurence; Turcotte-Tremblay, Anne-Marie; Van Belle, Sara; Vinard, Philippe

2018-01-01

This paper questions the view that performance-based financing (PBF) in the health sector is an effective, efficient and equitable approach to improving the performance of health systems in low-income and middle-income countries (LMICs). PBF was conceived as an open approach adapted to specific country needs, having the potential to foster system-wide reforms. However, as with many strategies and tools, there is a gap between what was planned and what is actually implemented. This paper argues that PBF as it is currently implemented in many contexts does not satisfy the promises. First, since the start of PBF implementation in LMICs, concerns have been raised on the basis of empirical evidence from different settings and disciplines that indicated the risks, cost and perverse effects. However, PBF implementation was rushed despite insufficient evidence of its effectiveness. Second, there is a lack of domestic ownership of PBF. Considering the amounts of time and money it now absorbs, and the lack of evidence of effectiveness and efficiency, PBF can be characterised as a donor fad. Third, by presenting itself as a comprehensive approach that makes it possible to address all aspects of the health system in any context, PBF monopolises attention and focuses policy dialogue on the short-term results of PBF programmes while diverting attention and resources from broader processes of change and necessary reforms. Too little care is given to system-wide and long-term effects, so that PBF can actually damage health services and systems. This paper ends by proposing entry points for alternative approaches. PMID:29564163

Body fat and body-mass index among a multiethnic sample of college-age men and women.

PubMed

Carpenter, Catherine L; Yan, Eric; Chen, Steve; Hong, Kurt; Arechiga, Adam; Kim, Woo S; Deng, Max; Li, Zhaoping; Heber, David

2013-01-01

Obesity prevalence and average body composition vary by US race and gender. Asian Americans have the lowest prevalence of obesity. Relying on body-mass index (BMI) to estimate obesity prevalence may misclassify subgroups that appear normally weighted but have excess body fat. We evaluated percentage body fat (PBF) and BMI to determine whether BMI reflects PBF consistently across different races. 940 college students were recruited from a local public university over four consecutive years. We measured PBF by bioelectrical impedance analysis (BIA), weight by physicians' scales, and height with stadiometers. Our sample comprised Asians (49%), Caucasians (23%), Hispanics (7%), and Other (21%). Participants averaged 21.4 years old; BMI was 22.9 kg/m(2); PBF was 24.8%. BMI and PBF varied significantly by race and gender (P value = 0.002 and 0.005 for men; 0.0009 and 0.0008 for women). Asian-American women had the lowest BMI (21.5 kg/m(2)) but the second highest PBF (27.8%). Linear association between BMI and PBF was the weakest (r (2) = 0.09) among Asian-American women and BMI had the poorest sensitivity (37%) to detect PBF. The high PBF with low BMI pattern exhibited by Asian-American women suggests that they could escape detection for obesity-related disease if BMI is the sole measure that estimates body composition.

Performance-based financing: the same is different.

PubMed

Renmans, Dimitri; Holvoet, Nathalie; Criel, Bart; Meessen, Bruno

2017-07-01

Although it is increasingly acknowledged within the Performance-Based Financing (PBF) research community that PBF is more than just payments based on outputs verified for quality, this narrow definition of PBF is still very present in many studies and evaluations. This leads to missed opportunities, misunderstandings and an unhelpful debate. Therefore, we reinforce the claim that PBF should be viewed as a reform package focused on targeted services with many different aspects that go beyond the health worker level. Failing to acknowledge the importance of the different elements of PBF negatively influences the task of practitioners, researchers and policymakers alike. After making the case for this wider definition, we propose three research pathways (describing, understanding and framing PBF) and give a short and tentative starting point for future research, leaving the floor open for more in-depth discussions. From these three vantage points it appears that when it comes to PBF 'the same is different'. Notwithstanding the increased complexity due to the use of the wider definition, progress on these three different research pathways will strongly improve our knowledge, lead to better adapted PBF programs and create a more nuanced debate on PBF. © The Author 2017. Published by Oxford University Press in association with The London School of Hygiene and Tropical Medicine. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Performance-based financing in the context of the complex remuneration of health workers: findings from a mixed-method study in rural Sierra Leone.

PubMed

Bertone, Maria Paola; Lagarde, Mylene; Witter, Sophie

2016-07-19

There is growing interest on the impact of performance-based financing (PBF) on health workers' motivation and performance. However, the literature so far tends to look at PBF payments in isolation, without reference to the overall remuneration of health workers. Taking the case of Sierra Leone, where PBF was introduced in 2011, this study investigates the absolute and relative contribution of PBF to health workers' income and explores their views on PBF bonuses, in comparison to and interaction with other incomes. The study is based on a mixed-methods research consisting in a survey and an 8-week longitudinal logbook collecting data on the incomes of primary health workers (n = 266) and 39 in-depth interviews with a subsample of the same workers, carried out in three districts of Sierra Leone (Bo, Kenema and Moyamba). Our results show that in this setting PBF contributes about 10 % of the total income of health workers. Despite this relatively low contribution, their views on the bonuses are positive, especially compared to the negative views on salary. We find that this is because PBF is seen as a complement, with less sense of entitlement compared to the official salary. Moreover, PBF has a specific role within the income utilization strategies enacted by health workers, as it provides extra money which can be used for emergencies or reinvested in income generating activities. However, implementation issues with the PBF scheme, such as delays in payment and difficulties in access, cause a series of problems that limit the motivational effects of the incentives. Overall, staff still favor salary increases over increases in PBF. The study confirms that the remuneration of health workers is complex and interrelated so that the different financial incentives cannot be examined independently from one. It also shows that the implementation of PBF schemes has an impact on the way it does or does not motivate health workers, and must be thoroughly researched in order to assess the impact of PBF.

An equity analysis of performance-based financing in Rwanda: are services reaching the poorest women?

PubMed

Priedeman Skiles, Martha; Curtis, Siân L; Basinga, Paulin; Angeles, Gustavo

2013-12-01

Maternal health services continue to favour the wealthiest in lower and middle income countries. Debate about the potential of performance-based financing (PBF) to address these disparities continues. As PBF is adopted by countries, it is critical to understand the equity effects for maternal services. The aim of this study is to examine the effects of PBF on equity in maternal health service use when no specific provisions target the poorest in the population. In Rwanda, PBF was designed to increase health service use, which was universally low. Paired districts were randomly assigned to intervention and control for PBF implementation. Using Rwanda's Demographic Health Survey data from 2005 (pre-intervention) and 2007-8 (post-intervention), a cluster-level panel dataset of 7899 women 15-49 years of age from intervention (4477) and control districts (3422) was created. The impact of PBF on reported use of facility deliveries, antenatal care (ANC) and modern contraceptive use was estimated using a difference-in-differences model with community fixed effects. Interaction terms between wealth quintiles and PBF were estimated to identify the differential effect of PBF among poorer women. The probability of a facility delivery increased by 10 percentage points in the intervention when compared with the control districts (P = 0.014), while no significant effects were noted for ANC visits or modern contraceptive use. Service use increased for intervention and control populations and across all wealth quintiles from 2005 to 2007, with no evidence that PBF was a pro-poor or a pro-rich strategy. Insurance remained a positive predictor of service use. This research suggests that if service use is uniformly low then a PBF programme that incentivizes select services, such as facility deliveries, may improve service use overall. However, if the equity gap is extreme, then a PBF programme without equity targets will do little to alleviate disparities.

Pulmonary blood flow redistribution by increased gravitational force

NASA Technical Reports Server (NTRS)

Hlastala, M. P.; Chornuk, M. A.; Self, D. A.; Kallas, H. J.; Burns, J. W.; Bernard, S.; Polissar, N. L.; Glenny, R. W.

1998-01-01

This study was undertaken to assess the influence of gravity on the distribution of pulmonary blood flow (PBF) using increased inertial force as a perturbation. PBF was studied in unanesthetized swine exposed to -Gx (dorsal-to-ventral direction, prone position), where G is the magnitude of the force of gravity at the surface of the Earth, on the Armstrong Laboratory Centrifuge at Brooks Air Force Base. PBF was measured using 15-micron fluorescent microspheres, a method with markedly enhanced spatial resolution. Each animal was exposed randomly to -1, -2, and -3 Gx. Pulmonary vascular pressures, cardiac output, heart rate, arterial blood gases, and PBF distribution were measured at each G level. Heterogeneity of PBF distribution as measured by the coefficient of variation of PBF distribution increased from 0.38 +/- 0.05 to 0.55 +/- 0.11 to 0.72 +/- 0.16 at -1, -2, and -3 Gx, respectively. At -1 Gx, PBF was greatest in the ventral and cranial and lowest in the dorsal and caudal regions of the lung. With increased -Gx, this gradient was augmented in both directions. Extrapolation of these values to 0 G predicts a slight dorsal (nondependent) region dominance of PBF and a coefficient of variation of 0.22 in microgravity. Analysis of variance revealed that a fixed component (vascular structure) accounted for 81% and nonstructure components (including gravity) accounted for the remaining 19% of the PBF variance across the entire experiment (all 3 gravitational levels). The results are inconsistent with the predictions of the zone model.

Improved oral bioavalability of mebudipine upon administration in PhytoSolve and Phosal-based formulation (PBF).

PubMed

Khani, Samira; Keyhanfar, Fariborz

2014-02-01

The aim of this investigation was to examine the efficacy of PhytoSolve and Phosal-based formulation (PBF) to enhance the oral bioavailability of mebudipine, which is a poorly water-soluble calcium channel blocker. The solubility of mebudipine in various oils was determined. PhytoSolve was prepared with a medium-chain triglyceride (MCT) oil (20%), soybean phospholipids (5%), and a 70% fructose solution (75%). The influence of the weight ratio of Phosal 50PG to glycerol in PBF on the mean globule size was studied with dynamic light scattering. The optimized formulation was evaluated for robustness toward dilution, transparency, droplet size, and zeta potential. The in vivo oral absorption of different mebudipine formulations (PhytoSolve, PBF, oily solution, and suspension) were evaluated in rats. The optimized PBF contained Phosal 50PG/glycerol in a 6:4 ratio (w/w). The PBF and PhytoSolve formulations were miscible with water in any ratio and did not demonstrate any phase separation or drug precipitation over 1 month of storage. The mean particle size of PhytoSolve and PBF were 138.5 ± 9.0 and 74.4 ± 2.5 nm, respectively. The in vivo study demonstrated that the oral bioavailability of PhytoSolve and PBF in rats was significantly higher than that of the other formulations. The PhytoSolve and PBF formulations of mebudipine are found to be more bioavailable compared with suspension and oily solutions during an in vivo study in rats. These formulations might be new alternative carriers that increase the oral bioavailability of poorly water-soluble molecules, such as mebudipine.

High protein buckwheat flour suppresses hypercholesterolemia in rats and gallstone formation in mice by hypercholesterolemic diet and body fat in rats because of its low protein digestibility.

PubMed

Tomotake, Hiroyuki; Yamamoto, Naoe; Yanaka, Noriyuki; Ohinata, Hiroshi; Yamazaki, Rikio; Kayashita, Jun; Kato, Norihisa

2006-02-01

This study evaluated the physiologic properties of high protein buckwheat flour (PBF) by examining its effects on serum cholesterol and body fat in rats and on cholesterol gallstone formation in mice. Animals were fed experimental diets that contained casein, buckwheat protein extract (BWP), or PBF as a protein source (net protein content 200 g/kg). In experiment 1, consumption of PBF and BWP for 10 d caused 33% and 31% decreases, respectively, in serum cholesterol of rats fed cholesterol-enriched diets when compared with consumption of casein (P < 0.05). Dietary PBF caused a significant decrease in liver cholesterol, whereas dietary BWP caused only a slight decrease (P > 0.05). Fecal excretion of neutral and acidic steroids in the PBF group was significantly higher than those in the BWP and casein groups. In experiment 2, consumption of PBF for 10 d significantly suppressed adipose tissue weight and hepatic activity of fatty acid synthase in rats fed cholesterol-free diets compared with consumption of casein (P < 0.05), whereas that of BWP for this period caused only a slight decrease in adipose tissue weight (P > 0.05). In experiment 3, dietary PBF and BWP significantly decreased the incidence of cholesterol gallstones and lithogenic index in mice fed cholesterol-enriched diets for 27 d, which was associated with increased fecal excretion of acidic steroids. This study demonstrated that PBF has strong activities against hypercholesterolemia, obesity, and gallstone formation, suggesting a potential usefulness of PBF as functional ingredient.

Efficiency of herbal medicine Dai-kenchu-to on portal blood flow in rat models.

PubMed

Muraoka, Izumi; Takatsuki, Mitsuhisa; Soyama, Akihiko; Yamaguchi, Izumi; Tanaka, Shiro; Tanaka, Takayuki; Kinoshita, Ayaka; Hara, Takanobu; Kuroki, Tamotsu; Eguchi, Susumu

2015-09-01

To clarify the influence of Dai-Kenchu-To (DKT) on portal blood flow (PBF), PBF was continuously measured with Doppler ultrasound. Normal liver rats were divided into a DKT 90 mg/kg, DKT 270 mg/kg administered group, and control, while cirrhotic liver rats were divided into a DKT-LC 90 mg/kg administered group and Control-LC. The PBF was measured after the administration of either DKT or water for 60 min by laser Doppler flowmetry system. The PBF in the DKT 90 increased approximately 10 min after DKT was administrated, and elevated levels were maintained for approximately 10 min. A comparison of the increase in PBF by the calculating the area under the curve (AUC) revealed that flow was significantly higher in the DKT 90 compared to either the control or the DKT 270 (p < 0.05). The cirrhotic liver group showed stable PBF in both the DKT-LC and Control-LC. The AUC, revealed no significant difference between the DKT-LC and Control-LC. DKT induced an increase in PBF in normal livers; however, its effects were insufficient to increase PBF in the cirrhotic livers. No increase in the portal blood flow in the cirrhotic liver rats was probably the result of the cirrhotic liver, which had fibrotic change, and, therefore, may not have had sufficient compliance to accept the increasing blood flow volume from the intestinal tract. We suggested DKT has the potential to protect the liver by increasing PBF when the liver has either normal or mild to moderate dysfunction.

PBF Reactor Building (PER620). Fuel rod test assembly is on ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF Reactor Building (PER-620). Fuel rod test assembly is on display at PBF. Date: 1982. INEEL negative no. 82-4893 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

SPERTI/PBF. Contextual aerial view after PBF had begun operating, but ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

SPERT-I/PBF. Contextual aerial view after PBF had begun operating, but prior to expansion of southwest corner of Reactor Building (PER-620). Camera facing northeast. Reactor Building in center of view. Cooling Tower (PER-720) to its left. Warehouse (PER-625) at lower left was built in 1966. SPERT-I Reactor Building (PER-605) and Instrument Cell Building (PER-604) at right of view. Buried cables and piping proceed from PBF toward lower edge of view to Control Building further south and out of view. Photographer: Farmer. Date: March 26, 1976. INEEL negative no. 76-1344 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

PBF Cooling Tower detail. Camera facing southwest into north side ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF Cooling Tower detail. Camera facing southwest into north side of Tower. Five horizontal layers of splash bars constitute fill decks, which will break up falling water into droplets, promoting evaporative cooling. Louvered faces, through which air enters tower, are on east and west sides. Louvers have been installed. Support framework for one of two venturi-shaped fan stacks (or "vents") is in center top. Orifices in hot basins (not in view) will distribute water over fill. Photographer: Kirsh. Date: May 15, 1969. INEEL negative no. 69-3032 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

Residual stress prediction in a powder bed fusion manufactured Ti6Al4V hip stem

NASA Astrophysics Data System (ADS)

Barrett, Richard A.; Etienne, Titouan; Duddy, Cormac; Harrison, Noel M.

2017-10-01

Powder bed fusion (PBF) is a category of additive manufacturing (AM) that is particularly suitable for the production of 3D metallic components. In PBF, only material in the current build layer is at the required melt temperature, with the previously melted and solidified layers reducing in temperature, thus generating a significant thermal gradient within the metallic component, particularly for laser based PBF components. The internal thermal stresses are subsequently relieved in a post-processing heat-treatment step. Failure to adequately remove these stresses can result in cracking and component failure. A prototype hip stem was manufactured from Ti6Al4V via laser PBF but was found to have fractured during over-seas shipping. This study examines the evolution of thermal stresses during the laser PBF manufacturing and heat treatment processes of the hip stem in a 2D finite element analysis (FEA) and compares it to an electron beam PBF process. A custom written script for the automatic conversion of a gross geometry finite element model into a thin layer- by-layer finite element model was developed. The build process, heat treatment (for laser PBF) and the subsequent cooling were simulated at the component level. The results demonstrate the effectiveness of the heat treatment in reducing PBF induced thermal stresses, and the concentration of stresses in the region that fractured.

Incentives to change: effects of performance-based financing on health workers in Zambia.

PubMed

Shen, Gordon C; Nguyen, Ha Thi Hong; Das, Ashis; Sachingongu, Nkenda; Chansa, Collins; Qamruddin, Jumana; Friedman, Jed

2017-02-28

Performance-based financing (PBF) has been implemented in a number of countries with the aim of transforming health systems and improving maternal and child health. This paper examines the effect of PBF on health workers' job satisfaction, motivation, and attrition in Zambia. It uses a randomized intervention/control design to evaluate before-after changes for three groups: intervention (PBF) group, control 1 (C1; enhanced financing) group, and control 2 (C2; pure control) group. Mixed methods are employed. The quantitative portion comprises of a baseline and an endline survey. The survey and sampling scheme were designed to allow for a rigorous impact evaluation of PBF or C1 on several key performance indicators. The qualitative portion seeks to explain the pathways underlying the observed differences through interviews conducted at the beginning and at the three-year mark of the PBF program. Econometric analysis shows that PBF led to increased job satisfaction and decreased attrition on a subset of measures, with little effect on motivation. The C1 group also experienced some positive effects on job satisfaction. The null results of the quantitative assessment of motivation cohere with those of the qualitative assessment, which revealed that workers remain motivated by their dedication to the profession and to provide health care to the community rather than by financial incentives. The qualitative evidence also provides two explanations for higher overall job satisfaction in the C1 than in the PBF group: better working conditions and more effective supervision from the District Medical Office. The PBF group had higher satisfaction with compensation than both control groups because they have higher compensation and financial autonomy, which was intended to be part of the PBF intervention. While PBF could not address all the reasons for attrition, it did lower turnover because those health centers were staffed with qualified personnel and the personnel had role clarity. In Zambia, the implementation of PBF schemes brought about a significant increase in job satisfaction and a decrease in attrition, but had no significant effect on motivation. Enhanced health financing also increased stated job satisfaction.

Efficiency of herbal medicine Dai-kenchu-to on portal blood flow in rat models

PubMed Central

Muraoka, Izumi; Takatsuki, Mitsuhisa; Soyama, Akihiko; Yamaguchi, Izumi; Tanaka, Shiro; Tanaka, Takayuki; Kinoshita, Ayaka; Hara, Takanobu; Kuroki, Tamotsu; Eguchi, Susumu

2015-01-01

Introduction To clarify the influence of Dai-Kenchu-To (DKT) on portal blood flow (PBF), PBF was continuously measured with Doppler ultrasound. Methods Normal liver rats were divided into a DKT 90 mg/kg, DKT 270 mg/kg administered group, and control, while cirrhotic liver rats were divided into a DKT-LC 90 mg/kg administered group and Control-LC. The PBF was measured after the administration of either DKT or water for 60 min by laser Doppler flowmetry system. Results The PBF in the DKT 90 increased approximately 10 min after DKT was administrated, and elevated levels were maintained for approximately 10 min. A comparison of the increase in PBF by the calculating the area under the curve (AUC) revealed that flow was significantly higher in the DKT 90 compared to either the control or the DKT 270 (p < 0.05). The cirrhotic liver group showed stable PBF in both the DKT-LC and Control-LC. The AUC, revealed no significant difference between the DKT-LC and Control-LC. Discussion DKT induced an increase in PBF in normal livers; however, its effects were insufficient to increase PBF in the cirrhotic livers. No increase in the portal blood flow in the cirrhotic liver rats was probably the result of the cirrhotic liver, which had fibrotic change, and, therefore, may not have had sufficient compliance to accept the increasing blood flow volume from the intestinal tract. Conclusion We suggested DKT has the potential to protect the liver by increasing PBF when the liver has either normal or mild to moderate dysfunction. PMID:26155361

Context matters (but how and why?) A hypothesis-led literature review of performance based financing in fragile and conflict-affected health systems.

PubMed

Bertone, Maria Paola; Falisse, Jean-Benoît; Russo, Giuliano; Witter, Sophie

2018-01-01

Performance-based financing (PBF) schemes have been expanding rapidly across low and middle income countries in the past decade, with considerable external financing from multilateral, bilateral and global health initiatives. Many of these countries have been fragile and conflict-affected (FCAS), but while the influence of context is acknowledged to be important to the operation of PBF, there has been little examination of how it affects adoption and implementation of PBF. This article lays out initial hypotheses about how FCAS contexts may influence the adoption, adaption, implementation and health system effects of PBF. These are then interrogated through a review of available grey and published literature (140 documents in total, covering 23 PBF schemes). We find that PBF has been more common in FCAS contexts, which were also more commonly early adopters. Very little explanation of the rationale for its adoption, in particular in relation with the contextual features, is given in programme documents. However, there are a number of factors which could explain this, including the greater role of external actors and donors, a greater openness to institutional reform, and lower levels of trust within the public system and between government and donors, all of which favour more contractual approaches. These suggest that rather than emerging despite fragility, conditions of fragility may favour the rapid emergence of PBF. We also document few emerging adaptations of PBF to humanitarian settings and limited evidence of health system effects which may be contextually driven, but these require more in-depth analysis. Another area meriting more study is the political economy of PBF and its diffusion across contexts.

Pulsed photothermal interferometry for spectroscopic gas detection with hollow-core optical fibre

PubMed Central

Lin, Yuechuan; Jin, Wei; Yang, Fan; Ma, Jun; Wang, Chao; Ho, Hoi Lut; Liu, Yang

2016-01-01

Gas detection with hollow-core photonic bandgap fibre (HC-PBF) and pulsed photothermal (PT) interferometry spectroscopy are studied theoretically and experimentally. A theoretical model is developed and used to compute the gas-absorption-induced temperature and phase modulation in a HC-PBF filled with low-concentration of C2H2 in nitrogen. The PT phase modulation dynamics for different pulse duration, peak power and energy of pump beam are numerically modelled, which are supported by the experimental results obtained around the P(9) absorption line of C2H2 at 1530.371 nm. Thermal conduction is identified as the main process responsible for the phase modulation dynamics. For a constant peak pump power level, the phase modulation is found to increase with pulse duration up to ~1.2 μs, while it increases with decreasing pulse duration for a constant pulse energy. It is theoretically possible to achieve ppb level detection of C2H2 with ~1 m length HC-PBF and a pump beam with ~10 ns pulse duration and ~100 nJ pulse energy. PMID:28009011

Pulsed photothermal interferometry for spectroscopic gas detection with hollow-core optical fibre.

PubMed

Lin, Yuechuan; Jin, Wei; Yang, Fan; Ma, Jun; Wang, Chao; Ho, Hoi Lut; Liu, Yang

2016-12-23

Gas detection with hollow-core photonic bandgap fibre (HC-PBF) and pulsed photothermal (PT) interferometry spectroscopy are studied theoretically and experimentally. A theoretical model is developed and used to compute the gas-absorption-induced temperature and phase modulation in a HC-PBF filled with low-concentration of C 2 H 2 in nitrogen. The PT phase modulation dynamics for different pulse duration, peak power and energy of pump beam are numerically modelled, which are supported by the experimental results obtained around the P(9) absorption line of C 2 H 2 at 1530.371 nm. Thermal conduction is identified as the main process responsible for the phase modulation dynamics. For a constant peak pump power level, the phase modulation is found to increase with pulse duration up to ~1.2 μs, while it increases with decreasing pulse duration for a constant pulse energy. It is theoretically possible to achieve ppb level detection of C 2 H 2 with ~1 m length HC-PBF and a pump beam with ~10 ns pulse duration and ~100 nJ pulse energy.

Association between body mass index and body fat in 9-11-year-old children from countries spanning a range of human development.

PubMed

Katzmarzyk, P T; Barreira, T V; Broyles, S T; Chaput, J-P; Fogelholm, M; Hu, G; Kuriyan, R; Kurpad, A; Lambert, E V; Maher, C; Maia, J; Matsudo, V; Olds, T; Onywera, V; Sarmiento, O L; Standage, M; Tremblay, M S; Tudor-Locke, C; Zhao, P; Church, T S

2015-12-01

The purpose was to assess associations between body mass index (BMI) and body fat in a multinational sample of 9-11-year-old children. The sample included 7265 children from countries ranging in human development. Total body fat (TBF) and percentage body fat (PBF) were measured with a Tanita SC-240 scale and BMI z-scores (BMIz) and percentiles were computed using reference data from the World Health Organization and the U.S. Centers for Disease Control and Prevention, respectively. Mean PBF at BMIz values of -1, 0 and +1 were estimated using multilevel models. Correlations between BMI and TBF were >0.90 in all countries, and correlations between BMI and PBF ranged from 0.76 to 0.96. Boys from India had higher PBF than boys from several other countries at all levels of BMIz. Kenyan girls had lower levels of PBF than girls from several other countries at all levels of BMIz. Boys and girls from Colombia had higher values of PBF at BMIz=-1, whereas Colombian boys at BMIz 0 and +1 also had higher values of PBF than boys in other countries. Our results show a consistently high correlation between BMI and adiposity in children from countries representing a wide range of human development.

PBF Reactor Building (PER620). Reactor vessel arrives from gate city ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF Reactor Building (PER-620). Reactor vessel arrives from gate city steel at door of PBF. On flatbed, it is too high to fit under door. Photographer: Larry Page. Date: February 13, 1970. INEEL negative no. 70-737 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

PBF Reactor Building (PER620). Detail of arrangement of highdensity blocks ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF Reactor Building (PER-620). Detail of arrangement of high-density blocks and other basement shielding. Date: February 1966. Ebasco Services 1205 PER/PBF 620-A-7. INEEL index no. 761-0620-00-205-123070 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

Reduced thermal sensitivity of hybrid air-core photonic band-gap fiber ring resonator

NASA Astrophysics Data System (ADS)

Feng, Li-shuang; Wang, Kai; Jiao, Hong-chen; Wang, Jun-jie; Liu, Dan-ni; Yang, Zhao-hua

2018-01-01

A novel hybrid air-core photonic band-gap fiber (PBF) ring resonator with twin 90° polarization-axis rotated splices is proposed and demonstrated. Frist, we measure the temperature dependent birefringence coefficient of air-core PBF and Panda fiber. Experimental results show that the relative temperature dependent birefringence coefficient of air-core PBF is 1.42×10-8/°C, which is typically 16 times less than that of Panda fiber. Then, we extract the geometry profile of air-core PBF from scanning electron microscope (SEM) images. Numerical modal is built to distinguish the fast axis and slow axis in the fiber. By precisely setting the length difference in air-core PBF and Panda fiber between two 90° polarization-axis rotated splicing points, the hybrid air-core PBF ring resonator is constructed, and the finesse of the resonator is 8.4. Environmental birefringence variation induced by temperature change can be well compensated, and experimental results show an 18-fold reduction in thermal sensitivity, compared with resonator with twin 0° polarization-axis rotated splices.

Improving health worker performance: The patient-perspective from a PBF program in Rwanda.

PubMed

Lannes, Laurence

2015-08-01

The effect of performance-based financing (PBF) on patients' perception of primary health care services in developing countries in not well documented. Data from a randomized impact evaluation in Rwanda conducted between 2006 and 2008 in 157 primary level facilities is used to explore patients' satisfaction with clinical and non-clinical services and quantify the contribution of individual and facility characteristics to satisfaction including PBF. Improvements in productivity, availability and competences of the health workforce following the implementation of PBF have a positive effect on patients' satisfaction with clinical services even if patients' satisfaction is not tied to a reward. The positive effect of PBF on non-clinical dimensions of satisfaction also suggests that PBF incentivizes providers to raise patients' satisfaction with non-clinical services if it is associated with future financial gains. It is recommended that low and middle income countries build on the experience from high income countries to better listen to patients' voice in general and include an assessment of patients' satisfaction in incentive mechanisms as a way to increase the benefits of the strategy. Copyright © 2015 Elsevier Ltd. All rights reserved.

Does performance-based financing increase value for money in low- and middle- income countries? A systematic review.

PubMed

Turcotte-Tremblay, Anne-Marie; Spagnolo, Jessica; De Allegri, Manuela; Ridde, Valéry

2016-12-01

Governments of low- and middle-income countries (LMICs) are widely implementing performance-based financing (PBF) to improve healthcare services. However, it is unclear whether PBF provides good value for money compared to status quo or other interventions aimed at strengthening the healthcare system in LMICs. The objective of this systematic review is to identify and synthesize the existing literature that examines whether PBF represents an efficient manner of investing resources. We considered PBF to be efficient when improved care quality or quantity was achieved with equal or lower costs, or alternatively, when the same quality of care was achieved using less financial resources. A manual search of the reference lists of two recent systematic reviews on economic evaluations of PBF was conducted to identify articles that met our inclusion and exclusion criteria. Subsequently, a search strategy was developed with the help of a librarian. The following databases and search engines were used: PubMed, EconLit, Google Scholar and Google. Experts on economic evaluations were consulted for validation of the selected studies. A total of seven articles from five LMICs were selected for this review. We found the overall strength of the evidence to be weak. None of the articles were full economic evaluations; they did not make clear connections between the costs and effects of PBF. Only one study reported using a randomized controlled trial, but issues with the randomization procedure were reported. Important alternative interventions to strengthen the capacities of the healthcare system have not been considered. Few studies examined the costs and consequences of PBF in the long term. Important costs and consequences were omitted from the evaluations. Few LMICs are represented in the literature, despite wide implementation. Lastly, most articles had at least one author employed by an organization involved in the implementation of PBF, thereby resulting in potential conflicts of interest. Stronger empirical evidence on whether PBF represents good value for money in LMICs is needed.

Reduced pulmonary blood flow in regions of injury 2 hours after acid aspiration in rats.

PubMed

Richter, Torsten; Bergmann, Ralf; Musch, Guido; Pietzsch, Jens; Koch, Thea

2015-01-01

Aspiration-induced lung injury can decrease gas exchange and increase mortality. Acute lung injury following acid aspiration is characterized by elevated pulmonary blood flow (PBF) in damaged lung areas in the early inflammation stage. Knowledge of PBF patterns after acid aspiration is important for targeting intravenous treatments. We examined PBF in an experimental model at a later stage (2 hours after injury). Anesthetized Wistar-Unilever rats (n = 5) underwent unilateral endobronchial instillation of hydrochloric acid. The PBF distribution was compared between injured and uninjured sides and with that of untreated control animals (n = 6). Changes in lung density after injury were measured using computed tomography (CT). Regional PBF distribution was determined quantitatively in vivo 2 hours after acid instillation by measuring the concentration of [(68)Ga]-radiolabeled microspheres using positron emission tomography. CT scans revealed increased lung density in areas of acid aspiration. Lung injury was accompanied by impaired gas exchange. Acid aspiration decreased the arterial pressure of oxygen from 157 mmHg [139;165] to 74 mmHg [67;86] at 20 minutes and tended toward restoration to 109 mmHg [69;114] at 110 minutes (P < 0.001). The PBF ratio of the middle region of the injured versus uninjured lungs of the aspiration group (0.86 [0.7;0.9], median [25%;75%]) was significantly lower than the PBF ratio in the left versus right lung of the control group (1.02 [1.0;1.05]; P = 0.016). The PBF pattern 2 hours after aspiration-induced lung injury showed a redistribution of PBF away from injured regions that was likely responsible for the partial recovery from hypoxemia over time. Treatments given intravenously 2 hours after acid-induced lung injury may not preferentially reach the injured lung regions, contrary to what occurs during the first hour of inflammation. Please see related article: http://dx.doi.org/10.1186/s12871-015-0014-z.

The effect of performance-based financing on illness, care-seeking and treatment among children: an impact evaluation in Rwanda.

PubMed

Skiles, Martha Priedeman; Curtis, Siân L; Basinga, Paulin; Angeles, Gustavo; Thirumurthy, Harsha

2015-09-14

Performance-based financing (PBF) strategies are promoted as a supply-side, results-based financing mechanism to improve primary health care. This study estimated the effects of Rwanda's PBF program on less-incentivized child health services and examined the differential program impact by household poverty. Districts were allocated to intervention and comparison for PBF implementation in Rwanda. Using Demographic Health Survey data from 2005 to 2007-08, a community-level panel dataset of 5781 children less than 5 years of age from intervention and comparison districts was created. The impacts of PBF on reported childhood illness, facility care-seeking, and treatment received were estimated using a difference-in-differences model with community fixed effects. An interaction term between poverty and the program was estimated to identify the differential effect of PBF among children from poorer families. There was no measurable difference in estimated probability of reporting illness with diarrhea, fever or acute respiratory infections between the intervention and comparison groups. Seeking care at a facility for these illnesses increased over time, however no differential effect by PBF was seen. The estimated effect of PBF on receipt of treatment for poor children is 45 percentage points higher (p = 0.047) compared to the non-poor children seeking care for diarrhea or fever. PBF, a supply-side incentive program, improved the quality of treatment received by poor children conditional on patients seeking care, but it did not impact the propensity to seek care. These findings provide additional evidence that PBF incentivizes the critical role staff play in assuring quality services, but does little to influence consumer demand for these services. Efforts to improve child health need to address both supply and demand, with additional attention to barriers due to poverty if equity in service use is a concern.

Association between body mass index and body fat in 9–11-year-old children from countries spanning a range of human development

PubMed Central

Katzmarzyk, P T; Barreira, T V; Broyles, S T; Chaput, J-P; Fogelholm, M; Hu, G; Kuriyan, R; Kurpad, A; Lambert, E V; Maher, C; Maia, J; Matsudo, V; Olds, T; Onywera, V; Sarmiento, O L; Standage, M; Tremblay, M S; Tudor-Locke, C; Zhao, P; Church, T S

2015-01-01

The purpose was to assess associations between body mass index (BMI) and body fat in a multinational sample of 9–11-year-old children. The sample included 7265 children from countries ranging in human development. Total body fat (TBF) and percentage body fat (PBF) were measured with a Tanita SC-240 scale and BMI z-scores (BMIz) and percentiles were computed using reference data from the World Health Organization and the U.S. Centers for Disease Control and Prevention, respectively. Mean PBF at BMIz values of −1, 0 and +1 were estimated using multilevel models. Correlations between BMI and TBF were >0.90 in all countries, and correlations between BMI and PBF ranged from 0.76 to 0.96. Boys from India had higher PBF than boys from several other countries at all levels of BMIz. Kenyan girls had lower levels of PBF than girls from several other countries at all levels of BMIz. Boys and girls from Colombia had higher values of PBF at BMIz=−1, whereas Colombian boys at BMIz 0 and +1 also had higher values of PBF than boys in other countries. Our results show a consistently high correlation between BMI and adiposity in children from countries representing a wide range of human development. PMID:27152184

PBF Control Building (PER619). Interior detail of control room's severe ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF Control Building (PER-619). Interior detail of control room's severe fuel damage instrument panel. Indicators provided real-time information about test underway in PBF reactor. Note audio speaker. Date: May 2004. INEEL negative no, HD-41-7-4 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

General layout of reactor and control areas upon advent of ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

General layout of reactor and control areas upon advent of power burst facility (PBF). Shows relationship of PBF to SPERT-I, -II, -III, and -IV. Ebasco Services 1205-PER/PBF-U-102. Date: July 1965. INEEL index no. 761-0100-00-205-123006 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

The effect of intraosseous local anesthesia of 4% articaine with 1:100,000 epinephrine on pulpal blood flow and pulpal anesthesia of mandibular molars and canines.

PubMed

Vongsavan, Kadkao; Samdrup, Tshering; Kijsamanmith, Kanittha; Rirattanapong, Praphasri; Vongsavan, Noppakun

2018-05-10

The aim of this study was to determine the effect of intraosseous (IO) anesthesia with 4% articaine and 1:100,000 epinephrine on pulpal blood flow (PBF) and pulpal anesthesia of mandibular first molars and canines in human subjects. Ten healthy volunteers with intact mandibular first molar and canine were given an osteocentral technique of IO injection using the Quick Sleeper 5 system and 4% articaine with 1:100,000 epinephrine at distal site of mandibular first molar. The PBF was monitored by a laser Doppler flowmeter (LDF). Pulpal anesthesia was assessed with an electric pulp tester (EPT). IO injection caused a decrease in PBF in molars from 6.31 ± 3.85 perfusion units (P.U.) before injection to 2.51 ± 2.53 P.U. 1 min after injection (P < 0.001). The percentage reduction in PBF was 60% after 1 min and PBF returned back to the baseline after 45 min. No significant reduction in PBF was observed in the canines (P = 0.212). For pulpal anesthesia in the molars, the mean onset was 2.40 ± 0.84 min and the mean duration was 38 ± 16.19 min. In the canines, there was a decrease in the sensitivity to EPT but complete pulpal anesthesia was not achieved. IO injection distal to mandibular first molar caused a decrease in PBF and successful pulpal anesthesia in first molar, but not in canine. Both PBF and EPT readings returned to normal, suggesting that pulpal ischemia may not occur. IO anesthesia is safe to use as a primary technique in teeth with normal pulp.

Changes in Maxillary Canine Pulpal Blood Flow During Dentoalveolar Distraction Osteogenesis.

PubMed

Ersahan, Seyda; Sabuncuoglu, Fidan Alakus

2016-05-01

The aim of this study was to assess the effects of dentoalveolar distraction osteogenesis (DD) on the pulpal blood flow (PBF) of maxillary canines. A laser Doppler flowmeter (LDF) was used to measure PBF in maxillary canines of 10 patients undergoing DD (study group) and 10 nonsurgical subjects who received no orthodontic treatment (control group). PBF was measured at baseline, at 4 and 7 days postoperatively, at the end of distraction and at the end of consolidation in the study group and at similar time-points in nonsurgical control subjects. Data were analyzed using paired and Student t tests, with the significance level set at 0.05. Study findings showed that baseline PBF values did not differ significantly between groups. PBF in the control group did not vary over time; however, in the study group, an initial decrease in PBF was observed at 4 days postoperatively and was followed by a gradual increase to preoperative levels at the end of distraction. During the DD latency period, there appears to be a short-lived ischemic phase when perfusion of pulp tissue declines; however, blood-flow returns to normal by the end of distraction.

Waist circumference cut-off in relation to body mass index and percentage of body fat in adult women from Merida, Mexico.

PubMed

Datta Banik, Sudip; Dickinson, Federico

2015-01-01

Waist circumference (WC) as an index of central obesity is related to body mass index (BMI) and percent body fat (PBF). Waist circumference data were analyzed to identify a WC cut-off for adult women with respect to BMI-based obesity (≥ 30 kg/m²) and PBF. The sample was 138 women aged 22 to 41 years with Maya ancestry (based on surnames) in Merida, Yucatan, measured during 2011 - 2013. Anthropometric parameters included height, body weight (BW), and BMI. The PBF was estimated by bioelectrical impedance. Estimated cut-offs per centimeter WC (80 - 99 cm) were predicted by BMI for obesity (≥ 30 kg m⁻²; binomial: Yes = 1, No = 0) and PBF (continuous variable) using binary logistic regression analyses. Mean age was 32 years, mean BMI was 29 kg m(-2) and mean WC was 89 cm. The sample exhibited high PBF (44 %), and high rates of overweight (44%) and obesity (40%). The threshold WC (≥ 93 cm) had high sensitivity (80%), specificity (82%), Youden Index value (0.62), and correct classification rate (82%). The area under the receiver operating characteristic curve was 88 %. The WC ≥ 93 cm cut-off had corresponding values for mean BMI (34 kg m⁻²) and PBF (47%). The optimal WC cut-off at 93 cm significantly identified central obesity for BMI ≥ 30 kg m⁻² and PBF for this sample.

PBF Reactor Building (PER620). Construction view shows native lava rock ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF Reactor Building (PER-620). Construction view shows native lava rock surrounding basement excavation and general complexity of planning required to build the PBF. A three-inch low-pressure air line protrudes from wall just below left center. Date: February 21, 1967. Photographer: Larry Page. INEEL negative no. 67-1125 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

SPERTI contextual view of instrument cell building, PER606. South facade. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

SPERT-I contextual view of instrument cell building, PER-606. South facade. Camera facing northwest. PBF Cooling Tower in view at right. High bay of PBF Reactor Building, PER-602, is further to right. PBF-625 at left edge of view. Date: August 2003. INEEL negative no. HD-35-3-4 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

The impact of the Bolsa Família Program on food consumption: a comparative study of the southeast and northeast regions of Brazil.

PubMed

Sperandio, Naiara; Rodrigues, Cristiana Tristão; Franceschini, Sylvia do Carmo Castro; Priore, Silvia Eloiza

2017-06-01

The aim of this study was to evaluate the impact of the Bolsa Família Program (PBF) on food consumption in the northeast and southeast regions of Brazil. The database was obtained from the individual food consumption module of the Household Budget Survey conducted in 2008-09. Consumption was assessed through two food records. The food was categorized into four groups: fresh or minimally processed food; culinary ingredients; processed food; and ultra-processed food. To analyze the impact, the propensity score matching method was used, which compares the individual recipients and non-recipients of the PBF in relation to a group of socioeconomic characteristics. After the propensity score was calculated, the impact of the PBF was estimated through the nearest-neighbor matching algorithm. In both regions, more than 60% of the daily total calories consumed by PBF recipients came from foods that had not undergone industrial processing. The recipients of PBF had a low level of consumption of processed and ultra-processed food in both regions, and an increased level of consumption of fresh or minimally processed food in the northeast. The results indicate the importance of adopting intersectoral policies in parallel to the PBF in order to strengthen healthy eating practices.

Assessment of EchoMRI-AH versus dual-energy X-ray absorptiometry by iDXA to measure human body composition.

PubMed

Marlatt, K L; Greenway, F L; Ravussin, E

2017-04-01

Comparison of percent fat mass across different body composition analysis devices is important given variation in technology accuracy and precision, as well as the growing need for cross-validation of devices often applied across longitudinal studies. We compared EchoMRI-AH and Lunar iDXA quantification of percent body fat (PBF) in 84 adults (43M, 41F), with the mean age 39.7±15.9 years and body mass index (BMI) 26.2±5.3 kg/m 2 . PBF correlated strongly between devices (r>0.95, P<0.0001). A prediction equation was derived in half of the subjects, and the other half were used to cross-validate the proposed equation (EchoMRI-AH PBF=[(0.94 × iDXA PBF)+(0.14 × Age)+(3.3 × Female)-8.83). The mean PBF difference (predicted-measured) in the validation group was not different from 0 (diff=0.27%, 95% confidence interval: -0.42-0.96, P=0.430). Bland-Altman plots showed a bias with higher measured PBF on EchoMRI-AH versus iDXA in all 84 subjects (β=0.13, P<0.0001). The proposed prediction equation was valid in our cross-validation sample, and it has the potential to be applied across multicenter studies.

Relationship between body mass index and adiposity in prepubertal children: ethnic and geographic comparisons between New York City and Jinan City (China)

PubMed Central

Navder, Khursheed P.; He, Qing; Zhang, Xiaojing; He, Suyuan; Gong, Luxia; Sun, Yungao; Deckelbaum, Richard J.; Thornton, John; Gallagher, Dympna

2009-01-01

Body mass index (BMI) is often used as a surrogate estimate of percent body fat in epidemiological studies. This study tested the hypothesis that BMI is representative of body fatness independent of age, sex, ethnicity, and geographic location in prepubertal children. The study sample included a total of 605 prepubertal children (275 girls and 330 boys) of which 247 were Chinese from Jinan, Shandong, Mainland China, and 358 children were from various ethnic backgrounds in New York City (NYC): 121 Caucasians, 94 African Americans, and 143 Asians (Chinese and Korean). In this cross-sectional study, dual energy X-ray absorptiometry was used to quantify total body fat (TBF) and percent body fat (PBF). Prepubertal status was assessed by the criteria of Tanner. Multiple regression models were developed with TBF and PBF as the dependent variables and BMI, age, sex, and ethnicity as independent variables. Multiple regression analysis showed that BMI alone explained 85% and 69% of between-subject variance for TBF and PBF, respectively. Sex was a significant contributor to the models (P < 0.001) with girls having higher TBF and PBF than boys. Ethnicity and geographic location were significant contributors to the model (P < 0.0001) with Asians (Jinan and NYC Asians) having higher PBF than all non-Asian groups (P < 0.0001), and Jinan Asians having higher TBF and PBF than NYC-Asians. Among prepubertal children, for the same BMI, Asians have significantly higher PBF compared with African Americans and Caucasians. Caution is warranted when applying BMI across sex and ethnic prepubertal groups. PMID:19541740

Prediction of microstructure, residual stress, and deformation in laser powder bed fusion process

NASA Astrophysics Data System (ADS)

Yang, Y. P.; Jamshidinia, M.; Boulware, P.; Kelly, S. M.

2018-05-01

Laser powder bed fusion (L-PBF) process has been investigated significantly to build production parts with a complex shape. Modeling tools, which can be used in a part level, are essential to allow engineers to fine tune the shape design and process parameters for additive manufacturing. This study focuses on developing modeling methods to predict microstructure, hardness, residual stress, and deformation in large L-PBF built parts. A transient sequentially coupled thermal and metallurgical analysis method was developed to predict microstructure and hardness on L-PBF built high-strength, low-alloy steel parts. A moving heat-source model was used in this analysis to accurately predict the temperature history. A kinetics based model which was developed to predict microstructure in the heat-affected zone of a welded joint was extended to predict the microstructure and hardness in an L-PBF build by inputting the predicted temperature history. The tempering effect resulting from the following built layers on the current-layer microstructural phases were modeled, which is the key to predict the final hardness correctly. It was also found that the top layers of a build part have higher hardness because of the lack of the tempering effect. A sequentially coupled thermal and mechanical analysis method was developed to predict residual stress and deformation for an L-PBF build part. It was found that a line-heating model is not suitable for analyzing a large L-PBF built part. The layer heating method is a potential method for analyzing a large L-PBF built part. The experiment was conducted to validate the model predictions.

Longitudinal associations between key dietary behaviors and weight gain over time: transitions through the adolescent years.

PubMed

Laska, Melissa N; Murray, David M; Lytle, Leslie A; Harnack, Lisa J

2012-01-01

Previous studies have yielded inconsistent results when documenting the association between key dietary factors and adolescent weight change over time. The purpose of this study was to examine the extent to which changes in adolescent sugar-sweetened beverage (SSB), diet soda, breakfast, and fast-food consumption were associated with changes in BMI and percent body fat (PBF). This study analyzed data from a sample of 693 Minnesota adolescents followed over 2 years. Random coefficient models were used to examine the relationship between dietary intake and BMI and PBF and to separate cross-sectional and longitudinal associations. Adjusting for total physical activity, total energy intake, puberty, race, socioeconomic status, and age, cross-sectional findings indicated that for both males and females, breakfast consumption was significantly and inversely associated with BMI and PBF, and diet soda intake was significantly and positively associated with BMI and PBF among females. In longitudinal analyses, however, there were fewer significant associations. Among males there was evidence of a significant longitudinal association between SSB consumption and PBF; after adjustment for energy intake, an increase of one serving of SSB per day was associated with an increase of 0.7 units of PBF among males. This study adds to previous research through its methodological strengths, including adjustment for physical activity and energy intake assessed using state-of-the-art methods (i.e., accelerometers and 24-h dietary recalls), as well as its evaluation of both BMI and PBF. Additional research is needed to better understand the complex constellation of factors that contribute to adolescent weight gain over time.

Mindful eating reduces impulsive food choice in adolescents and adults.

PubMed

Hendrickson, Kelsie L; Rasmussen, Erin B

2017-03-01

The present study tested the extent to which age and obesity predicted impulsive choices for food and monetary outcomes and tested how a brief mindful-eating training would alter delay discounting for food and money choices compared with control groups. First, 172 adolescents (M age = 13.13 years) and 176 (M age = 23.33 years) adults completed the Food Choice Questionnaire (FCQ) and Monetary Choice Questionnaire (MCQ) as measures of food and money delay discounting, respectively. Then, participants returned to the lab and were randomly assigned to complete a brief mindful-eating training, watch a DVD on nutrition, or serve as a control. Participants completed the FCQ and MCQ again as a postmanipulation measure. Participants with high percent body fat (PBF) were more impulsive for food than those with low PBF. Adults with high PBF were also more impulsive for money compared with adults with low PBF; no PBF-related differences were found for adolescents. Participants in the mindful-eating group exhibited more self-controlled choices for food, but not for money. The control conditions did not exhibit changes. The study suggests that individuals with high PBF make more impulsive food choices relative to those with low PBF, which could increase the risk of obesity over time. It also is the first to demonstrate shifts in choice patterns for food and money using a brief mindful-eating training with adolescents. Mindful eating is a beneficial strategy to reduce impulsive food choice, at least temporarily, that may impede weight gain. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Can performance-based financing help reaching the poor with maternal and child health services? The experience of rural Rwanda.

PubMed

Lannes, Laurence; Meessen, Bruno; Soucat, Agnes; Basinga, Paulin

2016-07-01

More than 20 countries in Africa are scaling up performance-based financing (PBF), but its impact on equity in access to health services remains to be documented. This paper draws on evidence from Rwanda to examine the capacity of PBF to ensure equal access to key health interventions especially in rural areas where most of the poor live. Specifically, it focuses on maternal and child health services, distinguishing two wealth groups, and uses data from a rigorous impact evaluation. Difference-in-difference technique is used, and different model specifications are tested: control for unobserved heterogeneity and common random error using linear probability model, seemingly unrelated regression equations, and clustering and fixed effects. Results suggest that in Rwanda, PBF improved efficiency rather than equity for most health services. We find that PBF achieved efficiency gains by improving access to health services for those easier to reach, generally the relatively more affluent. It turns out to be less effective in reaching the poorest. Our results illustrate the advantages of rigorous randomized impact evaluation data as results published earlier using a nationally representative survey (Demographic and Health Survey) were not able to capture the pro-rich nature of the PBF scheme in Rwanda. Our paper advocates for building mechanisms targeting the vulnerable groups in PBF strategies. It also highlights the need to understand the impact of PBF together with the specific development of health insurance coverage and the organization of the health system. Copyright © 2015 John Wiley & Sons, Ltd.

Comparison of Eight Equations That Predict Percent Body Fat Using Skinfolds in American Youth

PubMed Central

Roberts, Amy; Cai, Jianwen; Berge, Jerica M.; Stevens, June

2016-01-01

Abstract Background: Skinfolds are often used in equations to predict percent body fat (PBF) in youth. Although there are numerous such equations published, there is limited information to help researchers determine which equation to use for their sample. Methods: Using data from the 1999–2006 National Health and Nutrition Examination Surveys (NHANES), we compared eight published equations for prediction of PBF. These published equations all included triceps and/or subscapular skinfold measurements. We examined the PBF equations in a nationally representative sample of American youth that was matched by age, sex, and race/ethnicity to the original equation development population and a full sample of 8- to 18-year-olds. We compared the equation-predicted PBF to the dual-emission X-ray absorptiometry (DXA)-measured PBF. The adjusted R2, root mean square error (RMSE), and mean signed difference (MSD) were compared. The MSDs were used to examine accuracy and differential bias by age, sex, and race/ethnicity. Results: When applied to the full range of 8- 18-year-old youth, the R2 values ranged from 0.495 to 0.738. The MSD between predicted and DXA-measured PBF indicated high average accuracy (MSD between −1.0 and 1.0) for only three equations (Bray subscapular equation and Dezenberg equations [with and without race/ethnicity]). The majority of the equations showed differential bias by sex, race/ethnicity, weight status, or age. Conclusions: These findings indicate that investigators should use caution in the selection of an equation to predict PBF in youth given that results may vary systematically in important subgroups. PMID:27045618

Pulmonary blood flow and pulmonary hypertension: Is the pulmonary circulation flowophobic or flowophilic?

PubMed Central

Kulik, Thomas J.

2012-01-01

Increased pulmonary blood flow (PBF) is widely thought to provoke pulmonary vascular obstructive disease (PVO), but the impact of wall shear stress in the lung is actually poorly defined. We examined information from patients having cardiac lesions which impact the pulmonary circulation in distinct ways, as well as experimental studies, asking how altered hemodynamics impact the risk of developing PVO. Our results are as follows: (1) with atrial septal defect (ASD; increased PBF but low PAP), shear stress may be increased but there is little tendency to develop PVO; (2) with normal PBF but increased pulmonary vascular resistance (PVR; mitral valve disease) shear stress may also be increased but risk of PVO still low; (3) with high PVR and PBF (e.g., large ventricular septal defect), wall shear stress is markedly increased and the likelihood of developing PVO is much higher than with high PBF or PAP only; and (4) with ASD, experimental and clinical observations suggest that increased PBF plus another stimulus (e.g., endothelial inflammation) may be required for PVO. We conclude that modestly increased wall shear stress (e.g., ASD) infrequently provokes PVO, and likely requires other factors to be harmful. Likewise, increased PAP seldom causes PVO. Markedly increased wall shear stress may greatly increase the likelihood of PVO, but we cannot discriminate its effect from the combined effects of increased PAP and PBF. Finally, the age of onset of increased PAP may critically impact the risk of PVO. Some implications of these observations for future investigations are discussed. PMID:23130101

Liver stiffness and portal blood flow modifications induced by a liquid meal consumption: pathogenetic mechanisms and clinical relevance.

PubMed

Barone, Michele; Iannone, Andrea; Brunetti, Natale Daniele; Sebastiani, Francesco; Cecere, Onofrio; Berardi, Elsa; Antonica, Gianfranco; Di Leo, Alfredo

2015-05-01

The correlation between liver stiffness (LS) variations and portal blood flow (PBF) modifications induced by a standardized liquid meal consumption and the clinical relevance of this matter are two aspects not yet fully elucidated. Herein, we evaluated the variations of LS and PBF after a standardized liquid meal intake in patients with chronic liver disease. PBF and LS were determined after an overnight fasting period in 54 patients. They were divided in three groups according to baseline LS (absent, moderate, and severe). They consumed 200 ml of water and a standardized liquid meal (300 Kcal/200 ml) after 60 min. PBF and LS were measured at 30 min after water and liquid meal consumption. In all groups, LS and PBF values significantly increased only after meal consumption. A significant correlation between baseline LS values and post-meal increase of LS was observed. Moreover, higher basal stiffness values were associated to a larger increase of LS variation after meal consumption. The effect of the meal on LS remained statistically significant after multiple regression analysis. A significant correlation between increase of LS and PBF was found in patients with absent and moderate baseline LS. Nine patients (17%) switched from a lower to a higher level of LS after meal consumption. A low calories/low-volume meal is capable of significantly increasing LS regardless of the grade of stiffness, determining a reclassification rate of 17%. In presence of minimal or moderate stiffness, the increase of LS is significantly correlated with the augment of PBF.

Prediction of microstructure, residual stress, and deformation in laser powder bed fusion process

NASA Astrophysics Data System (ADS)

Yang, Y. P.; Jamshidinia, M.; Boulware, P.; Kelly, S. M.

2017-12-01

Laser powder bed fusion (L-PBF) process has been investigated significantly to build production parts with a complex shape. Modeling tools, which can be used in a part level, are essential to allow engineers to fine tune the shape design and process parameters for additive manufacturing. This study focuses on developing modeling methods to predict microstructure, hardness, residual stress, and deformation in large L-PBF built parts. A transient sequentially coupled thermal and metallurgical analysis method was developed to predict microstructure and hardness on L-PBF built high-strength, low-alloy steel parts. A moving heat-source model was used in this analysis to accurately predict the temperature history. A kinetics based model which was developed to predict microstructure in the heat-affected zone of a welded joint was extended to predict the microstructure and hardness in an L-PBF build by inputting the predicted temperature history. The tempering effect resulting from the following built layers on the current-layer microstructural phases were modeled, which is the key to predict the final hardness correctly. It was also found that the top layers of a build part have higher hardness because of the lack of the tempering effect. A sequentially coupled thermal and mechanical analysis method was developed to predict residual stress and deformation for an L-PBF build part. It was found that a line-heating model is not suitable for analyzing a large L-PBF built part. The layer heating method is a potential method for analyzing a large L-PBF built part. The experiment was conducted to validate the model predictions.

Comparison of Eight Equations That Predict Percent Body Fat Using Skinfolds in American Youth.

PubMed

Truesdale, Kimberly P; Roberts, Amy; Cai, Jianwen; Berge, Jerica M; Stevens, June

2016-08-01

Skinfolds are often used in equations to predict percent body fat (PBF) in youth. Although there are numerous such equations published, there is limited information to help researchers determine which equation to use for their sample. Using data from the 1999-2006 National Health and Nutrition Examination Surveys (NHANES), we compared eight published equations for prediction of PBF. These published equations all included triceps and/or subscapular skinfold measurements. We examined the PBF equations in a nationally representative sample of American youth that was matched by age, sex, and race/ethnicity to the original equation development population and a full sample of 8- to 18-year-olds. We compared the equation-predicted PBF to the dual-emission X-ray absorptiometry (DXA)-measured PBF. The adjusted R(2), root mean square error (RMSE), and mean signed difference (MSD) were compared. The MSDs were used to examine accuracy and differential bias by age, sex, and race/ethnicity. When applied to the full range of 8- 18-year-old youth, the R(2) values ranged from 0.495 to 0.738. The MSD between predicted and DXA-measured PBF indicated high average accuracy (MSD between -1.0 and 1.0) for only three equations (Bray subscapular equation and Dezenberg equations [with and without race/ethnicity]). The majority of the equations showed differential bias by sex, race/ethnicity, weight status, or age. These findings indicate that investigators should use caution in the selection of an equation to predict PBF in youth given that results may vary systematically in important subgroups.

PBF Reactor Building (PER620). After lowering reactor vessel onto blocks, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF Reactor Building (PER-620). After lowering reactor vessel onto blocks, it is rolled on logs into PBF. Metal framework under vessel is handling device. Various penetrations in reactor bottom were for instrumentation, poison injection, drains. Large one, below center "manhole" was for primary coolant. Photographer: Larry Page. Date: February 13, 1970. INEEL negative no. 70-736 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

Changes in human pulp blood flow during canine retraction.

PubMed

Sabuncuoglu, Fidan Alakus; Ersahan, Seyda

2016-08-01

To evaluate the effects of maxillary canine retraction on pulpal blood flow (PBF) in humans as recorded by laser Doppler flowmetry (LDF). Maxillary canines of 24 participants were divided into two groups (n = 12 each). Teeth in the study group underwent maxillary canine retraction using mini-implants as anchorage for approximately 4 months, with 100 g of force applied via coil springs. Subjects in the control group received no orthodontic treatment. LDF measurements were recorded at baseline (T0); during retraction, at 24 hours (T1), 3 days (T2), 7 days (T3) and 1 month (T4); and at the end of retraction (T5) in the study group and at similar time-points in control subjects. Data were analyzed using the Friedman, Wilcoxon signed rank and Mann-Whitney U tests, with the significance level set at 0.05. No significant changes in PBF perfusion units (PU) were observed in the control group over the course of the study. However, PBF in the study group increased significantly from T0 (3.6 ± 0.2 PU) to T1 (3.7 ± 0.2 PU, p < 0.001) and decreased severely from T1 to T2 (3.3 ± 0.1, p < 0.001). PBF in the study group was still significantly lower at T3 (3.4 ± 0.1 PU, p < 0.001) in comparison to T0; however, at T4 and T5, PBF was found to have returned to pre-retraction levels. The fact that PBF values returned to initial levels within one month of the initiation of retraction despite short-term, hyperaemic, regressive changes demonstrates that the changes observed in PBF during canine retraction are reversible.

Maize endosperm-specific transcription factors O2 and PBF network the regulation of protein and starch synthesis

PubMed Central

Zhang, Zhiyong; Zheng, Xixi; Yang, Jun; Messing, Joachim; Wu, Yongrui

2016-01-01

The maize endosperm-specific transcription factors opaque2 (O2) and prolamine-box binding factor (PBF) regulate storage protein zein genes. We show that they also control starch synthesis. The starch content in the PbfRNAi and o2 mutants was reduced by ∼5% and 11%, respectively, compared with normal genotypes. In the double-mutant PbfRNAi;o2, starch was decreased by 25%. Transcriptome analysis reveals that >1,000 genes were affected in each of the two mutants and in the double mutant; these genes were mainly enriched in sugar and protein metabolism. Pyruvate orthophosphate dikinase 1 and 2 (PPDKs) and starch synthase III (SSIII) are critical components in the starch biosynthetic enzyme complex. The expression of PPDK1, PPDK2, and SSIII and their protein levels are further reduced in the double mutants as compared with the single mutants. When the promoters of these genes were analyzed, we found a prolamine box and an O2 box that can be additively transactivated by PBF and O2. Starch synthase IIa (SSIIa, encoding another starch synthase for amylopectin) and starch branching enzyme 1 (SBEI, encoding one of the two main starch branching enzymes) are not directly regulated by PBF and O2, but their protein levels are significantly decreased in the o2 mutant and are further decreased in the double mutant, indicating that o2 and PbfRNAi may affect the levels of some other transcription factor(s) or mRNA regulatory factor(s) that in turn would affect the transcript and protein levels of SSIIa and SBEI. These findings show that three important traits—nutritional quality, calories, and yield—are linked through the same transcription factors. PMID:27621432

Performance-based financing for improving HIV/AIDS service delivery: a systematic review.

PubMed

Suthar, Amitabh B; Nagata, Jason M; Nsanzimana, Sabin; Bärnighausen, Till; Negussie, Eyerusalem K; Doherty, Meg C

2017-01-04

Although domestic HIV/AIDS financing is increasing, international HIV/AIDS financing has plateaued. Providing incentives for the health system (i.e. performance-based financing [PBF]) may help countries achieve more with available resources. We systematically reviewed effects of PBF on HIV/AIDS service delivery to inform WHO guidelines. PubMed, WHO Index Medicus, conference databases, and clinical trial registries were searched in April 2015 for randomised trials, comparative contemporaneous studies, or time-series studies. Studies evaluating PBF in people with HIV were included when they reported service quality, access, or cost. Meta-analyses were not possible due to limited data. This study is registered with PROSPERO, number CRD42015023207. Four studies, published from 2009 to 2015 and including 173,262 people, met the eligibility criteria. All studies were from Sub-Saharan Africa. PBF did not improve individual testing coverage (relative risk [RR], 1.00, 95% confidence interval [CI] 0.89 to 1.13), improved couples testing coverage (RR 1.11, 95% CI 1.02 to 1.20), and improved pregnant women testing coverage (RR 1.29, 95% CI 1.28-1.30). PBF improved coverage of antiretrovirals in pregnant women (RR 1.55, 95% CI 1.50 to 1.59), infants (RR 1.92, 95% CI 1.84 to 2.01), and adults (RR 1.74, 1.64 to 1.85). PBF reduced attrition (RR 0.84, 95% CI 0.74 to 0.96) and treatment failure (odds ratio 0.55, 95% CI 0.32 to 0.97). Potential harms were not reported. Although the limited data suggests PBF positively affected HIV service access and quality, critical health system and governance knowledge gaps remain. More research is needed to inform national policymaking.

Opening the 'black box' of performance-based financing in low- and lower middle-income countries: a review of the literature.

PubMed

Renmans, Dimitri; Holvoet, Nathalie; Orach, Christopher Garimoi; Criel, Bart

2016-11-01

Although performance-based financing (PBF) receives increasing attention in the literature, a lot remains unknown about the exact mechanisms triggered by PBF arrangements. This article aims to summarize current knowledge on how PBF works, set out what still needs to be investigated and formulate recommendations for researchers and policymakers from donor and recipient countries alike. Drawing on an extensive systematic literature review of peer-reviewed journals, we analysed 35 relevant articles. To guide us through this variety of studies, point out relevant issues and structure findings, we use a comprehensive analytical framework based on eight dimensions. The review inter alia indicates that PBF is generally welcomed by the main actors (patients, health workers and health managers), yet what PBF actually entails is less straightforward. More research is needed on the exact mechanisms through which not only incentives but also ancillary components operate. This knowledge is essential if we really want to appreciate the effectiveness, desirability and appropriate format of PBF as one of the possible answers to the challenges in the health sector of low-and lower middle-income countries. A clear definition of the research constructs is a primordial starting point for such research. © The Author 2016. Published by Oxford University Press in association with The London School of Hygiene and Tropical Medicine. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Community participation and voice mechanisms under performance-based financing schemes in Burundi.

PubMed

Falisse, Jean-Benoît; Meessen, Bruno; Ndayishimiye, Juvénal; Bossuyt, Michel

2012-05-01

Community participation is often described as a key for primary health care in low-income countries. Recent performance-based financing (PBF) initiatives have renewed the interest in this strategy by questioning the accountability of those in charge at the health centre (HC) level. We analyse the place of two downward accountability mechanisms in a PBF scheme: health committees elected among the communities and community-based organizations (CBOs) contracted as verifiers of health facilities' performance. We evaluated 100 health committees and 79 CBOs using original data collected in six Burundi provinces (2009-2010) and a framework based on the literature on community participation in health and New Institutional Economics. Health committees appear to be rather ineffective, focusing on supporting the medical staff and not on representing the population. CBOs do convey information about the concerns of the population to the health authorities; yet, they represent only a few users and lack the ability to force changes. PBF does not automatically imply more 'voice' from the population, but introduces an interesting complement to health committees with CBOs. However, important efforts remain necessary to make both mechanisms work. More experiments and analysis are needed to develop truly efficient 'downward' mechanisms of accountability at the HC level. © 2012 Blackwell Publishing Ltd.

Glutamate control of pulpal blood flow in the incisor dental pulp of the rat.

PubMed

Zerari-Mailly, Fouzia; Braud, Adeline; Davido, Nicolas; Touré, Babacar; Azérad, Jean; Boucher, Yves

2012-10-01

Glutamate is present in primary sensory afferents innervating the dental pulp and is known to exert vasoactive effects. The aims of this study were (i) to assess pulpal blood flow (PBF) after glutamate infusion in the dental pulp and (ii) to observe the distribution of glutamatergic nerve fibers expressing the vesicular transporters of glutamate (VGluT). The PBF was monitored with laser Doppler flowmetry before and after glutamate (0.5 M) infusion in the dental pulp vs. saline infusion. Immunochemistry for VGluT1, 2, and 3 was performed in addition to immunochemistry for the vascular and neuronal markers smooth-muscle actin (SMA), isolectin B4 (IB4), and calcitonin gene-related peptide (CGRP). Glutamate infusion resulted in a PBF increase that lasted for 60 s. Positive immunolabeling was observed for the three glutamate transporters, but was more pronounced for VGluT3. Moreover, VGluT3 immunoreactivity was observed within nerve fibers entering the dental pulp and terminating at the periphery and at the vicinity of odontoblasts. Also, VGluT3 was colocalized with the vascular marker SMA, and in some nerve fibers with IB4, but not with CGRP. This study provides support for a control of dental pulp microcirculation by neurons expressing VGluT3. © 2012 Eur J Oral Sci.

Case formulation and management using pattern-based formulation (PBF) methodology: clinical case 1.

PubMed

Fernando, Irosh; Cohen, Martin

2014-02-01

A tool for psychiatric case formulation known as pattern-based formulation (PBF) has been recently introduced. This paper presents an application of this methodology in formulating and managing complex clinical cases. The symptomatology of the clinical presentation has been parsed into individual clinical phenomena and interpreted by selecting explanatory models. The clinical presentation demonstrates how PBF has been used as a clinical tool to guide clinicians' thinking, that takes a structured approach to manage multiple issues using a broad range of management strategies. In doing so, the paper also introduces a number of patterns related to the observed clinical phenomena that can be re-used as explanatory models when formulating other clinical cases. It is expected that this paper will assist clinicians, and particularly trainees, to better understand PBF methodology and apply it to improve their formulation skills.

Percentage body fat in apparently healthy school children from northern India.

PubMed

Khadgawat, R; Marwaha, R K; Tandon, N; Mehan, N; Upadhyay, A D; Sastry, A; Bhadra, K

2013-09-01

Increased prevalence of obesity in childhood and adolescence, defined by the use of body mass index (BMI), has drawn attention towards direct measurement of body fat. To develop age-and sex-specific reference distribution of body fat in apparently healthy North-Indian children in the age group of 7-17 years and to assess agreement between obesity (defined by BMI) and excess body fat. Study subjects for this cross sectional study included 1640 apparently healthy school children (825 boys; 815 girls) aged 7-17 years. Total body fat was measured by dual energy X-rays absorptiometry (DXA). The excess body fat by DXA was defined by two methods, prevalence matching and with the use of 85th and 95th centile cutoffs. The mean ± SD, 3rd, 10th, 25th, 50th, 75th, 90th and 97th centile values of percentage body fat (PBF) are presented. PBF was highly correlated with BMI in both boys and girls (all boys: r=0.76, P<0.0001; all girls r=0.81, P<0.0001). There was no significant difference noted in PBF between boys and girls at the age of 7-8 years. From 9 years onwards, girls had significantly higher PBF than boys. Moderate degree of agreement was observed between BMI and PBF by DXA by both methods. Smoothened reference distribution of PBF for North-Indian children and adolescents in Delhi are provided. Indian children accumulate more body fat during peri-pubertal years in comparison with US children.

Breast-feeding in South Korea: factors influencing its initiation and duration.

PubMed

Chung, Woojin; Kim, Hanjoong; Nam, Chung-Mo

2008-03-01

To investigate factors influencing the practices of partial breast-feeding (PBF) and exclusive breast-feeding (EBF). A national, cross-sectional survey was conducted among married women aged 15-49 years from May to August 2003. South Korea. A total of 865 mothers answered questions regarding the feeding practices of their youngest baby, born between January 2001 and May 2003. The initiation rates of PBF and EBF were 81% and 63%, respectively. However, the median durations of PBF and EBF were very short: 12 and 8 weeks, respectively. According to stepwise logistic and Cox regression analyses, the more prenatal care women received, the more likely they were to initiate PBF and EBF but the less likely to continue EBF. Delivery by Caesarean section decreased the initiation of PBF and EBF. The mother's education level and employment status before marriage, the amount of prenatal care, delivery method and baby's status at birth affected breast-feeding initiation, whereas the amount of prenatal care influenced breast-feeding duration. To promote breast-feeding, education and campaigning on the importance of continued breast-feeding should be provided to the general public, particularly to health workers in maternity units.

Body Fat Measurements in Singaporean Adults Using Four Methods

PubMed Central

Bi, Xinyan; Loo, Yi Ting

2018-01-01

Few studies have been conducted to measure body composition in Asian populations. In this study, we determined the percent body fat (PBF) by using dual-energy X-ray absorptiometry (DEXA), air-displacement plethysmography (ADP or BOD POD), bioelectrical impedance analysis (BIA) and skinfold (SKF) in 445 healthy Singaporean adults. We observed that the BOD POD, BIA and SKF estimates of PBF were highly correlated with that from DEXA (as a reference method) among Singaporean adults. However, they all underestimated PBF (differences of 3.9% for BOD POD, 5.6% for BIA and 12.5% for SKF). Our results filled a gap in the literature by testing the relationships between DEXA and BOD POD, BIA and SKF in a large sample with a wide range of body mass index (BMI) from 16.1 to 37.5 kg/m2 and age from 21 to 69.2 years. The differences of PBF measured by different methods were dependent on age, gender and ethnicity. No significant difference was observed between DEXA and BOD POD in men aged > 40 or in BMI tertile 3. However, the mean difference between DEXA and BOD POD was significant in women. Different measuring methods of estimating PBF therefore must be cautiously interpreted. PMID:29510545

PbF2-based single crystals and phase diagrams of PbF2-MF2 systems (M = Mg, Ca, Sr, Ba, Cd)

NASA Astrophysics Data System (ADS)

Buchinskaya, I. I.; Fedorov, Pavel P.; Sobolev, B. P.

1997-07-01

Optical grade single crystals of Pb0.67Cd0.33F2 and Pb1-xCaxF2 (x less than 0.05) were grown by the Bridgman technique in graphite crucibles under fluorinating atmosphere of teflon pyrolysis products. For determinations of concentration areas of solid solutions, suitable for crystal growth, the phase interactions in the systems PbF2 with fluorides of alkaline-earth elements and Cd were studied by DTA and x-ray powder diffraction techniques. Phase diagrams were described by corresponding thermodynamic models. Transition from pure PbF2 to two- component Pb0.67Cd0.33F2 crystal is accompanied by some increase in radiation hardness of the latter and positive changes of mechanical characteristics (the Pb0.67Cd0.33F2 composition microhardness is 147 plus or minus 5 kg/mm2 that is 5 times that of a pure lead fluoride, 28 plus or minus 4 kg/mm2). These solid solutions have a cubic Fm3m fluorite-type lattice as a high-temperature modification of PbF2.

PBF (PER620) interior, basement level. Sampling equipment. Date: May 2004. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF (PER-620) interior, basement level. Sampling equipment. Date: May 2004. INEEL negative no. HD-41-5-4 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

PBF (PER620) interior. Counting room, main floor. Date: May 2004. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF (PER-620) interior. Counting room, main floor. Date: May 2004. INEEL negative no. HD-41-6-1 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

PBF Reactor Building (PER620). Plot plan shows layout, including auxiliary ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF Reactor Building (PER-620). Plot plan shows layout, including auxiliary buildings: Emergency Generator (621), Hose House (622), Cooling Tower Auxiliary (624), Maintenance and Storage Warehouse (625), Gas Cylinder Storage (627), Hose House (628), Cooling Tower (720), Substation (719), and other features. Road connections between PBF Reactor, its control building, and SPERT-I site. Note cable trenches along road to control building. Date: July 1965. Ebasco Services, PER-U-101. INEEL index no. 761-0100-00-205-123005 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

Behavior Management and Behavioral Change: How Can We Tell Them Apart?

ERIC Educational Resources Information Center

Olive, Edna

2010-01-01

Understanding the differences between behavior management and behavior change helps adults identify the differences between the two and teaches them what they can do to be effective in the use of both. This article introduces Positive Behavior Facilitation (PBF) Tool #3 which aims to support adults in understanding the differences between behavior…

Similarity in percent body fat between white and Vietnamese women: implication for a universal definition of obesity.

PubMed

Ho-Pham, Lan T; Lai, Thai Q; Nguyen, Nguyen D; Barrett-Connor, Elizabeth; Nguyen, Tuan V

2010-06-01

It has been widely assumed that for a given BMI, Asians have higher percent body fat (PBF) than whites, and that the BMI threshold for defining obesity in Asians should be lower than the threshold for whites. This study sought to test this assumption by comparing the PBF between US white and Vietnamese women. The study was designed as a comparative cross-sectional investigation. In the first study, 210 Vietnamese women ages between 50 and 85 were randomly selected from various districts in Ho Chi Minh City (Vietnam). In the second study, 419 women of the same age range were randomly selected from the Rancho Bernardo Study (San Diego, CA). In both studies, lean mass (LM) and fat mass (FM) were measured by dual-energy X-ray absorptiometry (DXA) (QDR 4500; Hologic). PBF was derived as FM over body weight. Compared with Vietnamese women, white women had much more FM (24.8 +/- 8.1 kg vs. 18.8 +/- 4.9 kg; P < 0.0001) and greater PBF (36.4 +/- 6.5% vs. 35.0 +/- 6.2%; P = 0.012). However, there was no significant difference in PBF between the two groups after matching for BMI (35.1 +/- 6.2% vs. 35.0 +/- 5.7%; P = 0.87) or for age and BMI (35.6 +/- 5.1% vs. 35.8 +/- 5.9%; P = 0.79). Using the criteria of BMI >or=30, 19% of US white women and 5% of Vietnamese women were classified as obese. Approximately 54% of US white women and 53% of Vietnamese women had their PBF >35% (P = 0.80). Although white women had greater BMI, body weight, and FM than Vietnamese women, their PBF was virtually identical. Further research is required to derive a more appropriate BMI threshold for defining obesity for Asian women.

Nitric oxide, prostaglandins and angiotensin II in the regulation of renal medullary blood flow during volume expansion.

PubMed

Moreno, Carol; Llinás, María T; Rodriguez, Francisca; Moreno, Juan M; Salazar, F Javier

2016-03-01

Regulation of medullary blood flow (MBF) is essential in maintaining renal function and blood pressure. However, it is unknown whether outer MBF (OMBF) and papillary blood flow (PBF) are regulated independently when extracellular volume (ECV) is enhanced. The aim of this study was to determine whether OMBF and PBF are differently regulated and whether there is an interaction between nitric oxide (NO), prostaglandins (PGs) and angiotensin II (Ang II) in regulating OMBF and PBF when ECV is enhanced. To achieve these goals, OMBF and PBF were measured by laser-Doppler in volume-expanded rats treated with a cyclooxygenase inhibitor (meclofenamate, 3 mg/kg) and/or a NO synthesis inhibitor (L-nitro-arginine methyl ester (L-NAME), 3 μg/kg/min) and/or Ang II (10 ng/kg/min). OMBF was unchanged by NO or PGs synthesis inhibition but decreased by 36 % (P < 0.05) when L-NAME and meclofenamate were infused simultaneously. PBF was similarly reduced by L-NAME (12 %), meclofenamate (17 %) or L-NAME + meclofenamate (19 %). Ang II did not modify OMBF, but it led to a similar decrease (P < 0.05) in OMBF when it was administered to rats with reduced NO (32 %), PGs (36 %) or NO and PGs (37 %) synthesis. In contrast, the fall in PBF induced by Ang II (12 %) was enhanced (P < 0.05) by the simultaneous PGs (30 %) or PGs and NO (31 %) synthesis inhibition but not in L-NAME-treated rats (20 %). This study presents novel findings suggesting that blood flows to the outer medulla and renal papilla are differently regulated and showing that there is a complex interaction between NO, PGs and Ang II in regulating OMBF and PBF when ECV is enhanced.

PBF (PER620) interior, first basement level. Sampling equipment. Date: March ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF (PER-620) interior, first basement level. Sampling equipment. Date: March 2004. INEEL negative no. HD-41-4-1 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

PBF (PER620) interior, basement level. Detail of coolant piping. Date: ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF (PER-620) interior, basement level. Detail of coolant piping. Date: May 2004. INEEL negative no. HD-41-5-2 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

Alternative methods for measuring obesity in African American women.

PubMed

Clark, Ashley E; Taylor, Jacquelyn Y; Wu, Chun Yi; Smith, Jennifer A

2013-03-01

The use of body mass index (BMI) may not be the most appropriate measurement tool in determining obesity in diverse populations. We studied a convenience sample of 108 African American (AA) women to determine the best method for measuring obesity in this at-risk population. The purpose of this study was to determine if percent body fat (PBF) and percent body water (PBW) could be used as alternatives to BMI in predicting obesity and risk for hypertension (HTN) among AA women. After accounting for age, BMI, and the use of anti-hypertensive medication, PBF (p = 0.0125) and PBW (p = 0.0297) were significantly associated with systolic blood pressure, while BMI was not. Likewise, PBF (p = 0.0316) was significantly associated with diastolic blood pressure, while PBW and BMI were not. Thus, health care practitioners should consider alternative anthropometric measurements such as PBF when assessing obesity in AA women.

[The debate concerning performance-based financing in Africa South of the Sahara: analysis of the nature].

PubMed

Manitu, Serge Mayaka; Meessen, Bruno; Lushimba, Michel Muvudi; Macq, Jean

2015-01-01

Performance-based financing (PBF) is a strategy designed to link thefunding of health services to predetermined results. Payment by an independent strategic purchaser is subject to verification of effective achievement of health outcomes in terms ofquantity and quality. This article investigates the complex tensions observed in relation to performance based financing (PBF) and identifies some reasons for disagreement on this approach. This study was essentially qualitative. Interviews were conducted with a panel of experts on PBF mobilizing their ability to reflect on the various arguments and positions concerning this financing mechanism. To enhance our analyses, we proposed a framework based on the main reasonsfor scientific or political controversies and factors involved in their emergence. Analysis of the information collected therefore consisted of combining experts verbatim reports with corresponding factors of controversies of our framework. Graphic representations of the differences were also established. Tensions concerning PBF are based on facts (experts' interpretation ofPBF), principles and values (around each expert's conceptual framework), balances of power between experts but also inappropriate behavior in the discussion process. Viewpoints remain isolated, each individual experience and an overview are lacking, which can interfere with decision-making and maintain the Health system reform crisis. Potential solutions to reduce these tensions are proposed. Our study shows that experts have difficulties agreeing on a theoretical priority approach to PBE. A good understanding of the nature of the tensions and an improvement in the quality of dialogue will promote a real dynamic of change and the proposal of an agenda of PBF actions.

PBF (PER620) interior. System control racks, secondary control and equipment ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF (PER-620) interior. System control racks, secondary control and equipment room. Date: May 2004. INEEL negative no. HD-41-6-2 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

Performance-based financing as a health system reform: mapping the key dimensions for monitoring and evaluation.

PubMed

Witter, Sophie; Toonen, Jurrien; Meessen, Bruno; Kagubare, Jean; Fritsche, György; Vaughan, Kelsey

2013-09-29

Performance-based financing is increasingly being applied in a variety of contexts, with the expectation that it can improve the performance of health systems. However, while there is a growing literature on implementation issues and effects on outputs, there has been relatively little focus on interactions between PBF and health systems and how these should be studied. This paper aims to contribute to filling that gap by developing a framework for assessing the interactions between PBF and health systems, focusing on low and middle income countries. In doing so, it elaborates a general framework for monitoring and evaluating health system reforms in general. This paper is based on an exploratory literature review and on the work of a group of academics and PBF practitioners. The group developed ideas for the monitoring and evaluation framework through exchange of emails and working documents. Ideas were further refined through discussion at the Health Systems Research symposium in Beijing in October 2012, through comments from members of the online PBF Community of Practice and Beijing participants, and through discussion with PBF experts in Bergen in June 2013. The paper starts with a discussion of definitions, to clarify the core concept of PBF and how the different terms are used. It then develops a framework for monitoring its interactions with the health system, structured around five domains of context, the development process, design, implementation and effects. Some of the key questions for monitoring and evaluation are highlighted, and a systematic approach to monitoring effects proposed, structured according to the health system pillars, but also according to inputs, processes and outputs. The paper lays out a broad framework within which indicators can be prioritised for monitoring and evaluation of PBF or other health system reforms. It highlights the dynamic linkages between the domains and the different pillars. All of these are also framed within inter-sectoral and wider societal contexts. It highlights the importance of differentiating short term and long term effects, and also effects (intended and unintended) at different levels of the health system, and for different sectors and areas of the country. Outstanding work will include using and refining the framework and agreeing on the most important hypotheses to test using it, in relation to PBF but also other purchasing and provider payment reforms, as well as appropriate research methods to use for this task.

Preliminary Investigation on Life Cycle Inventory of Powder Bed Fusion of Stainless Steel

NASA Astrophysics Data System (ADS)

Nyamekye, Patricia; Piili, Heidi; Leino, Maija; Salminen, Antti

Manufacturing of work pieces from stainless steel with laser additive manufacturing, known also as laser sintering or 3D printing may increase energy and material efficiency. The use of powder bed fusion offers advantages to make parts for dynamic applications of light weight and near-net-shape products. Due to these advantages among others, PBF may also reduce emissions and operational cost in various applications. However, there are only few life cycle assessment studies examining this subject despite its prospect to business opportunity. The application of Life Cycle Inventory (LCI) in Powder Bed Fusion (PBF) provides a distinct evaluation of material and energy consumption. LCI offers a possibility to improve knowledge of process efficiency. This study investigates effect of process sustainability in terms of raw material, energy and time consumption with PBF and CNC machining. The results of the experimental study indicated lower energy efficiency in the production process with PBF. This study revealed that specific energy consumption in PBF decreased when several components are built simultaneously than if they would be built individually. This is due to fact that energy consumption per part is lower. On the contrary, amount of energy needed to machine on part in case of CNC machining is lower when parts are done separately.

Spatial and temporal variability in the trans-Pacific migration of Pacific bluefin tuna (Thunnus orientalis) revealed by archival tags

NASA Astrophysics Data System (ADS)

Fujioka, Ko; Fukuda, Hiromu; Tei, Yaoki; Okamoto, Suguru; Kiyofuji, Hidetada; Furukawa, Seishiro; Takagi, Junichi; Estess, Ethan; Farwell, Charles J.; Fuller, Daniel W.; Suzuki, Nobuaki; Ohshimo, Seiji; Kitagawa, Takashi

2018-03-01

Archival electronic tags were internally implanted in 713 age-0 Pacific bluefin tuna (PBF) caught in their nursery waters off the southern coast of Japan and in the East China Sea over an extended study period (1995-2015) to clarify the spatial and temporal variability of their trans-Pacific migration. Two hundred twenty-five of these tagged tuna were recaptured by fisheries (31.6%), and we successfully retrieved tag data from 14 of 21 individuals recovered in the Eastern pacific. Furthermore, one archival tag recovered in the Western Pacific revealed that the individual had performed a trans-Pacific migration, so in total 21 tagged PBF were shown to have migrated to the Eastern Pacific (2.9% of the total tags released). We successfully downloaded data from 15 of these 21 archival tags, which revealed that some age-1 PBF migrate rapidly (123.9 ± 82.8 km day-1) and directly from waters offshore of Japan to the eastern Pacific (160.0°E to 130.0°W), a journey that takes an average of 2.5 months (ranging from 1.2 to 5.5 months) through relatively cool waters (14.7 ± 2.0 °C). All juvenile PBF began their trans-Pacific migration shortly after exposure to cooler water temperatures (<14 °C), suggesting that sustained residence in lower water temperatures presents a physiological challenge for this age class. Three patterns were identified in the timing of the departure of juvenile PBF from the western Pacific: departing 12-14 months post-hatch (N = 7) in early summer (May-July), departing 17-19 months post-hatch (N = 7) in late autumn (October-December), and departing 21 months post-hatch (N = 1) in late winter (February). The PBF tagged along the southern coast of Japan (SCJ) arrived in the eastern Pacific earlier than those tagged in the East China Sea (ECS), most likely due to the shorter travel distance. Additionally, the PBF that began their trans-Pacific migration in the earlier period remained in an offshore foraging zone (the Kuroshio-Oyashio transition region) for shorter periods (2.8 months on average) and at lower latitudes (35.0°N) during the spring, while the PBF that delayed their migration spent more time (6.7 months on average) in the productive waters between 35.0 and 45.0°N during the spring-autumn months. The variability in the departure timing of the trans-Pacific migration of age-1 PBF may be related to geographic differences between nursery areas in addition to oceanographic conditions and foraging opportunities encountered by the tuna in the offshore waters of Japan during their first year.

PBF Cooling Tower (PER720). Camera faces south to show north ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF Cooling Tower (PER-720). Camera faces south to show north facade. Note enclosed stairway. Date: August 2003. INEEL negative no. HD-35-10-3 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

PBF Reactor Building (PER620). Canal takes shape, with rebar and ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF Reactor Building (PER-620). Canal takes shape, with rebar and concrete placement underway. Photographer: John Capek. Date: August 16, 1967. INEEL negative no. 67-4370 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

PBF Cooling Tower (PER720). Closeup detail of louvered wall panels ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF Cooling Tower (PER-720). Close-up detail of louvered wall panels on south facade. Date: August 2003. INEEL negative no. HD-35-11-1 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

PBF Control Building auxiliary features, including fire hose house and ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF Control Building auxiliary features, including fire hose house and sewage system. Ebasco Services 1205 PER/PER-A-4. INEEL undex no. 760-0619-00-205-123024 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

Increase in pulmonary blood flow at birth: role of oxygen and lung aeration.

PubMed

Lang, Justin A R; Pearson, James T; Binder-Heschl, Corinna; Wallace, Megan J; Siew, Melissa L; Kitchen, Marcus J; te Pas, Arjan B; Fouras, Andreas; Lewis, Robert A; Polglase, Graeme R; Shirai, Mikiyasu; Hooper, Stuart B

2016-03-01

Lung aeration stimulates the increase in pulmonary blood flow (PBF) at birth, but the spatial relationships between PBF and lung aeration and the role of increased oxygenation remain unclear. Using simultaneous phase-contrast X-ray imaging and angiography, we have investigated the separate roles of lung aeration and increased oxygenation in PBF changes at birth using near-term (30 days of gestation) rabbit kits (n = 18). Rabbits were imaged before ventilation, then the right lung was ventilated with 100% nitrogen (N2), air or 100% O2 (oxygen), before all kits were switched to ventilation in air, followed by ventilation of both lungs using air. Unilateral ventilation of the right lung with 100% N2 significantly increased heart rate (from 69.4 ± 4.9 to 93.0 ± 15.0 bpm), the diameters of both left and right pulmonary axial arteries, number of visible vessels in both left and right lungs, relative PBF index in both pulmonary arteries, and reduced bolus transit time for both left and right axial arteries (from 1.34 ± 0.39 and 1.81 ± 0.43 s to 0.52 ± 0.17 and 0.89 ± 0.21 s in the left and right axial arteries, respectively). Similar changes were observed with 100% oxygen, but increases in visible vessel number and vessel diameter of the axial arteries were greater in the ventilated right lung during unilateral ventilation. These findings confirm that PBF increase at birth is not spatially related to lung aeration and that the increase in PBF to unventilated regions is unrelated to oxygenation, although oxygen can potentiate this increase. © 2015 The Authors. The Journal of Physiology © 2015 The Physiological Society.

Physicians' and nurses' attitudes towards performance-based financial incentives in Burundi: a qualitative study in the province of Gitega.

PubMed

Rudasingwa, Martin; Uwizeye, Marie Rose

2017-01-01

Performance-based financing (PBF) was first implemented in Burundi in 2006 as a pilot programme in three provinces and was rolled out nationwide in 2010. PBF is a reform approach to improve the quality, quantity, and equity of health services and aims at achieving universal health coverage. It focuses on how to best motivate health practitioners. To elicit physicians' and nurses' experiences and views on how PBF influenced and helped them in healthcare delivery. A qualitative cross-sectional study was carried out among frontline health workers such as physicians and nurses. The data was gathered through individual face-to-face, in-depth, semi-structured interviews with 6 physicians and 30 nurses from February to March 2011 in three hospitals in Gitega Province. A simple framework approach and thematic analysis using a combination of manual technique and MAXQDA software guided the analysis of the interview data. Overall, the interviewees felt that the PBF scheme had provided positive motivation to improve the quality of care, mainly in the structures and process of care. The utilization of health services and the relationship between health practitioners and patients also improved. The salary top-ups were recognized as the most significant impetus to increase effort in improving the quality of care. The small and sometimes delayed financial incentives paid to physicians and nurses were criticized. The findings of this study also indicate that the positive interaction between performance-based incentive schemes and other health policies is crucial in achieving comprehensive improvement in healthcare delivery. PBF has the potential to motivate medical staff to improve healthcare provision. The views of medical staff and the context of the area of implementation have to be taken into consideration when designing and implementing PBF schemes.

76 FR 4341 - Combined Notice of Filings #1

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-25

... Time on Thursday, February 03, 2011. Docket Numbers: ER10-2077-004. Applicants: PBF Power Marketing LLC. Description: Supplemental Information/Request Change-in-Status Notification of PBF Power Marketing LLC. Filed...-certification [or self-recertification] listed above, do not institute a proceeding regarding qualifying...

PBF Reactor Building (PER620). Floor at left of view is ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF Reactor Building (PER-620). Floor at left of view is floor of first basement. Photographer: Farmer/Capek. Date: March 17, 1967. INEEL negative no. 67-1753 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

PBF Cooling Tower detail. Camera facing southwest. Wood fill rises ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF Cooling Tower detail. Camera facing southwest. Wood fill rises from foundation piers of cold water basin. Photographer: Kirsh. Date: May 1, 1969. INEEL negative no. 69-2826 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

PBF (PER620) west facade. Camera facing east. Note 1980 addition ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF (PER-620) west facade. Camera facing east. Note 1980 addition on south side of west wall. Date: March 2004. INEEL negative no. HD-41-3-3 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

The Quality Improvement of Emulsion-type Pork Sausages Formulated by Substituting Pork Back fat with Rice Bran Oil

PubMed Central

Yum, Hyeon-Woong; Seo, Jin-Kyu; Jeong, Jin-Yeon; Kim, Gap-Don; Rahman, M. Shafiur; Yang, Han-Sul

2018-01-01

The effects of pork back fat (PBF) substitution with various concentrations of rice bran oil (RBO) (50%, 45%, 40% and 35%) on the physicochemical characteristics and sensory attributes of emulsion-type pork sausages were studied. The modified pork sausages were compared with control sausages produced using PBF only. The sausages with RBO had significantly lower (p<0.05) moisture content than the control sausages. Sausages made from PBF substituted with 40% RBO showed the lowest cooking loss. Substitution of PBF with RBO had no significant effect on the emulsion stability of pork sausages. All sausages with RBO showed significantly lower (p<0.05) hardness values than control sausages. Sausages with RBO also had significantly higher values (p<0.05) of unsaturated fatty acid and polyunsaturated to saturated fatty acid contents than the controls. RBO substitution had no effect on the flavor intensity of sausages, but it improved the tenderness and produced a softer texture. PMID:29725230

Elucidating the Relations Between Monotonic and Fatigue Properties of Laser Powder Bed Fusion Stainless Steel 316L

NASA Astrophysics Data System (ADS)

Zhang, Meng; Sun, Chen-Nan; Zhang, Xiang; Goh, Phoi Chin; Wei, Jun; Li, Hua; Hardacre, David

2018-03-01

The laser powder bed fusion (L-PBF) technique builds parts with higher static strength than the conventional manufacturing processes through the formation of ultrafine grains. However, its fatigue endurance strength σ f does not match the increased monotonic tensile strength σ b. This work examines the monotonic and fatigue properties of as-built and heat-treated L-PBF stainless steel 316L. It was found that the general linear relation σ f = mσ b for describing conventional ferrous materials is not applicable to L-PBF parts because of the influence of porosity. Instead, the ductility parameter correlated linearly with fatigue strength and was proposed as the new fatigue assessment criterion for porous L-PBF parts. Annealed parts conformed to the strength-ductility trade-off. Fatigue resistance was reduced at short lives, but the effect was partially offset by the higher ductility such that comparing with an as-built part of equivalent monotonic strength, the heat-treated parts were more fatigue resistant.

The assisted bidirectional Glenn: a novel surgical approach for first-stage single-ventricle heart palliation.

PubMed

Esmaily-Moghadam, Mahdi; Hsia, Tain-Yen; Marsden, Alison L

2015-03-01

Outcomes after a modified Blalock-Taussig shunt (mBTS) in neonates with single-ventricle physiology remain unsatisfactory. However, initial palliation with a superior cavopulmonary connection, such as a bidirectional Glenn (BDG), is discouraged, owing to potential for inadequate pulmonary blood flow (PBF). We tested the feasibility of a novel surgical approach, adopting the engineering concept of an ejector pump, whereby the flow in the BDG is "assisted" by injection of a high-energy flow stream from the systemic circulation. Realistic 3-dimensional models of the neonatal mBTS and BDG circulations were created. The "assisted" bidirectional Glenn (ABG) consisted of a shunt between the right innominate artery and the superior vena cava (SVC), with a 1.5-mm clip near the SVC anastomosis to create a Venturi effect. The 3 models were coupled to a validated hydraulic circulation model, and 2 pulmonary vascular resistance (PVR) values (7 and 2.3 Wood units) were simulated. The ABG provided the highest systemic oxygen saturation and oxygen delivery at both PVR levels. In addition to achieving higher PBF than the BDG, the ABG produced a lower single-ventricular workload than mBTS. SVC pressure was highest in the ABG model (ABG: 15; Glenn: 11; mBTS: 3 mm Hg; PVR = 7 Wood units), but at low PVR, the SVC pressure was significantly lower (ABG: 8; Glenn: 6; mBTS: <3 mm Hg). Adopting the principle of an ejector pump, with additional flow directed into the SVC in a BDG, the ABG appears to increase PBF with a modest increase in SVC and pulmonary arterial pressure. Although multiscale modeling results demonstrate the conceptual feasibility of the ABG circulation, further technical refinement and investigations are necessary, especially in an appropriate animal model. Copyright © 2015 The American Association for Thoracic Surgery. Published by Elsevier Inc. All rights reserved.

PBF (PER620) north facade. Camera facing south. Small metal shed ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF (PER-620) north facade. Camera facing south. Small metal shed at right is Stack Gas Monitor Building, PER-629. Date: March 2004. INEEL negative no. HD-41-2-4 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

PBF Control Building (PER619). Interior in data acquisition room showing ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF Control Building (PER-619). Interior in data acquisition room showing data racks. The system recorded multiple channels of data during tests. INEEL negative no. HD-41-8-1 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

PBF Control Building (PER619) south facade. Camera faces north. Note ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF Control Building (PER-619) south facade. Camera faces north. Note buried tanks with bollards protecting their access hatches. Date: July 2004. INEEL negative no. HD-41-10-4 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

Performance-based financing as a health system reform: mapping the key dimensions for monitoring and evaluation

PubMed Central

2013-01-01

Background Performance-based financing is increasingly being applied in a variety of contexts, with the expectation that it can improve the performance of health systems. However, while there is a growing literature on implementation issues and effects on outputs, there has been relatively little focus on interactions between PBF and health systems and how these should be studied. This paper aims to contribute to filling that gap by developing a framework for assessing the interactions between PBF and health systems, focusing on low and middle income countries. In doing so, it elaborates a general framework for monitoring and evaluating health system reforms in general. Methods This paper is based on an exploratory literature review and on the work of a group of academics and PBF practitioners. The group developed ideas for the monitoring and evaluation framework through exchange of emails and working documents. Ideas were further refined through discussion at the Health Systems Research symposium in Beijing in October 2012, through comments from members of the online PBF Community of Practice and Beijing participants, and through discussion with PBF experts in Bergen in June 2013. Results The paper starts with a discussion of definitions, to clarify the core concept of PBF and how the different terms are used. It then develops a framework for monitoring its interactions with the health system, structured around five domains of context, the development process, design, implementation and effects. Some of the key questions for monitoring and evaluation are highlighted, and a systematic approach to monitoring effects proposed, structured according to the health system pillars, but also according to inputs, processes and outputs. Conclusions The paper lays out a broad framework within which indicators can be prioritised for monitoring and evaluation of PBF or other health system reforms. It highlights the dynamic linkages between the domains and the different pillars. All of these are also framed within inter-sectoral and wider societal contexts. It highlights the importance of differentiating short term and long term effects, and also effects (intended and unintended) at different levels of the health system, and for different sectors and areas of the country. Outstanding work will include using and refining the framework and agreeing on the most important hypotheses to test using it, in relation to PBF but also other purchasing and provider payment reforms, as well as appropriate research methods to use for this task. PMID:24073625

75 FR 32453 - Combined Notice of Filings #1

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-08

... Wednesday, June 16, 2010. Docket Numbers: ER10-1097-001. Applicants: PBF Power Marketing LLC. Description: PBF Power Marketing LLC submits tariff filing per 35.17(b): Amended MBR Application, to be effective 6...-recertification] listed above, do not institute a proceeding regarding qualifying facility status. A notice of...

PBF Reactor Building (PER620). Camera in first basement, facing south ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF Reactor Building (PER-620). Camera in first basement, facing south and upward toward main floor. Cable trays being erected. Photographer: Kirsh. Date: May 20, 1969. INEEL negative no. 69-3110 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

PBF (PER620) interior, second basement level. Coolant and tank piping. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF (PER-620) interior, second basement level. Coolant and tank piping. Mark on vertical pipe says, "H.P. Demin. Water." (High pressure demineralized water.) Date: March 2004. INEEL negative no. HD-41-4-3 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

PBF (PER620) interior, basement level. Concrete wall shows outline of ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF (PER-620) interior, basement level. Concrete wall shows outline of reactor basin. Sign says, "Flashing Light - Reactor On - Evacuate Area." Date: May 2004. INEEL negative no. HD-41-5-3 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

PBF (PER620) south facade. Camera facing north. Note pedestrian bridge ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF (PER-620) south facade. Camera facing north. Note pedestrian bridge crossing over conduit. Central high bay contains reactor room and canal. Date: March 2004. INEEL negative no. HD-41-2-1 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

PBF Control Building (PER619). Interior of control room shows control ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF Control Building (PER-619). Interior of control room shows control console from direction facing visitors room and its observation window. Camera facing northeast. Date: May 2004. INEEL negative no. HD-41-7-1 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

PBF Cooling Tower Auxiliary Building (PER624) interior. Camera facing north. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF Cooling Tower Auxiliary Building (PER-624) interior. Camera facing north. Deluge valves and automatic fire protection piping for Cooling Tower. Photographer: Holmes. Date: May 20, 1970. INEEL negative no. 70-2323 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

PBF Reactor Building (PER620) Cubicle 13. Plan, section, details. Note ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF Reactor Building (PER-620) Cubicle 13. Plan, section, details. Note "quality assurance" code at bottom of drawing. Aerojet Nuclear Company. Date: May 1976. INEEL index no. 761-0620-00-400-195279 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

PBF Cubicle 13. Shield wall details illustrate shielding technique of ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF Cubicle 13. Shield wall details illustrate shielding technique of stepped penetrations and brick layout scheme for valve stem extension sleeve. Aerojet Nuclear Company. Date: May 1976. INEEL index no. 761-0620-00-400-195280 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

PBF (PER620) interior, first basement. Detail of valves and other ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF (PER-620) interior, first basement. Detail of valves and other penetrations along wall. Bricks are made of high density shielding materials. Date: March 2004. INEEL negative no. HD-41-4-2 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

PBF Cooling Tower. View of stairway to fan deck. Vents ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF Cooling Tower. View of stairway to fan deck. Vents are made of redwood. Camera facing southwest toward north side of Cooling Tower. Siding is corrugated asbestos concrete. Photographer: Kirsh. Date: June 6, 1969. INEEL negative no. 69-3463 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

PBF Reactor Building (PER620). Camera in second basement near subpile ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF Reactor Building (PER-620). Camera in second basement near sub-pile room (directly below reactor vessel). Door and penetrations lead to sub-pile room. Date: August 15, 1969. Photographer: Larry Page. INEEL negative no. 69-4310 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

PBF Cooling Tower contextual view. Camera facing southwest. West wing ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF Cooling Tower contextual view. Camera facing southwest. West wing and north facade (rear) of Reactor Building (PER-620) is at left; Cooling Tower to right. Photographer: Kirsh. Date: November 2, 1970. INEEL negative no. 70-4913 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

PBF (PER620) interior. Detail view of door in north wall ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF (PER-620) interior. Detail view of door in north wall of reactor bay. Camera facing north. Note tonnage weighting of hatch covers in floor. Date: May 2004. INEEL negative no. HD-41-8-2 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

PBF (PER620) interior. Detail view of actuator platform and control ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF (PER-620) interior. Detail view of actuator platform and control rod mechanism. Camera facing easterly from floor level. Reactor pool at lower left of view. Date: March 2004. INEEL negative no. HD-41-3-3 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

PBF Reactor Building (PER620). Camera faces southeast. Concrete placement will ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF Reactor Building (PER-620). Camera faces southeast. Concrete placement will leave opening for neutron camera to be installed later. Note vertical piping within rebar. Photographer: John Capek. Date: July 6, 1967. INEEL negative no. 67-3514 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

PBF Reactor Building (PER620). Aerial view of early construction. Camera ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF Reactor Building (PER-620). Aerial view of early construction. Camera facing northwest. Excavation and concrete placement in two basements are underway. Note exposed lava rock. Photographer: Farmer. Date: March 22, 1965. INEEL negative no. 65-2219 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

PBF Reactor Building (PER620). Camera faces north into highbay/reactor pit ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF Reactor Building (PER-620). Camera faces north into high-bay/reactor pit area. Inside from for reactor enclosure is in place. Photographer: John Capek. Date: March 15, 1967. INEEL negative no. 67-1769 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

PBF Reactor Building (PER620). Camera facing south end of high ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF Reactor Building (PER-620). Camera facing south end of high bay. Vertical-lift door is being installed. Later, pneumatic seals will be installed around door. Photographer: Kirsh. Date: September 31, 1968. INEEL negative no. 68-3176 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

PBF Reactor Building (PER620) as seen from control room window ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF Reactor Building (PER-620) as seen from control room window in PER-619. Photographer stood just outside window. Note exposed communication cables on desert surface. Date: July 2004. INEEL negative no. HD-41-9-3 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

PBF Reactor Building (PER620). Cubicle 10 detail. Camera facing west ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF Reactor Building (PER-620). Cubicle 10 detail. Camera facing west toward brick shield wall. Valve stems against wall penetrate through east wall of cubicle. Photographer: John Capek. Date: August 19, 1970. INEEL negative no. 70-3469 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

75 FR 24941 - PBF Power Marketing LLC; Supplemental Notice That Initial Market-Based Rate Filing Includes...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-06

... Marketing LLC; Supplemental Notice That Initial Market- Based Rate Filing Includes Request for Blanket... of PBF Power Marketing LLC's application for market-based rate authority, with an accompanying rate... protests and interventions in lieu of paper, using the FERC Online links at http://www.ferc.gov . To...

Gas phase bio-filter for the removal of triethylamine (TEA) from air: microbial diversity analysis with reference to design parameters.

PubMed

Gandu, Bharath; Sandhya, K; Gangagni Rao, A; Swamy, Y V

2013-07-01

Biotic (packed bio-filter; PBF) and abiotic (packed filter; PF) studies were carried out on two similar 2L gas phase filters for the removal of triethylamine (TEA) at inlet concentration in the range of 250-280 ppmV. Removal efficiency (RE) of PBF remained in the range of 90-99% during the stable period of operation (170 days) whereas RE of PF dropped gradually to 10% in a span of 90 days. Five different bacterial species viz; Aeromonas sp., Alcaligenes sp., Arthrobacter sp., Klebsiella sp., and Pseudomonas sp., were identified in PBF. It was observed that diethyl amine, ethylamine and nitrate were formed as metabolites during the degradation pathway. Empty bed residence time of 20s, mass loading rate of 202.26 g/m(3)/h, space velocity of 178.82 m(3)/m(3)/h and elimination capacity of 201.52 g/m(3)/h were found to be optimum design parameters for PBF to get RE in the range of 90-99%. Copyright © 2013 Elsevier Ltd. All rights reserved.

Hydration status of exclusively and partially breastfed near-term newborns in the first week of life.

PubMed

Kusuma, Sirisha; Agrawal, Sunil Kumar; Kumar, Praveen; Narang, Anil; Prasad, Rajendra

2009-08-01

An in-hospital prospective, observational cohort study was conducted to assess the effects of type of feeding (exclusively breastfed [EBF] vs partially breastfed [PBF]) on the hydration status of near-term newborns in the first week of life. A total of 205 babies of 35 to 37 weeks of completed gestation were enrolled (82 in the EBF group and 123 in the PBF group). The overall incidence of significant weight loss (>or=10%) was 18% with no significant difference between EBF and PBF groups (18.3% vs 17.9%, P=.94). The incidence of hypernatremia (serum NA>or=150 meq/L) was 2.4% in the EBF group and 5.7% in the PBF group (P=.32). The factors associated with significant weight loss in the total cohort were having a mother with previous negative breastfeeding experience (adjusted odds ratio [OR]=16.5, 95% confidence interval [CI]=2.1-115.7), exposure to phototherapy (adjusted OR=9.0, 95% CI=2.5-31.8), and cesarean delivery (adjusted OR=6.7, 95% CI=2.3-19.7).

Dynamic Network Communication in the Human Functional Connectome Predicts Perceptual Variability in Visual Illusion.

PubMed

Wang, Zhiwei; Zeljic, Kristina; Jiang, Qinying; Gu, Yong; Wang, Wei; Wang, Zheng

2018-01-01

Ubiquitous variability between individuals in visual perception is difficult to standardize and has thus essentially been ignored. Here we construct a quantitative psychophysical measure of illusory rotary motion based on the Pinna-Brelstaff figure (PBF) in 73 healthy volunteers and investigate the neural circuit mechanisms underlying perceptual variation using functional magnetic resonance imaging (fMRI). We acquired fMRI data from a subset of 42 subjects during spontaneous and 3 stimulus conditions: expanding PBF, expanding modified-PBF (illusion-free) and expanding modified-PBF with physical rotation. Brain-wide graph analysis of stimulus-evoked functional connectivity patterns yielded a functionally segregated architecture containing 3 discrete hierarchical networks, commonly shared between rest and stimulation conditions. Strikingly, communication efficiency and strength between 2 networks predominantly located in visual areas robustly predicted individual perceptual differences solely in the illusory stimulus condition. These unprecedented findings demonstrate that stimulus-dependent, not spontaneous, dynamic functional integration between distributed brain networks contributes to perceptual variability in humans. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

Efectos combinados de la ampliación de la atención primaria de salud y de las transferencias condicionadas de dinero en efectivo sobre la mortalidad infantil en Brasil, 1998–2010*

PubMed Central

Guanais, Frederico C.

2015-01-01

Objetivos. Examiné los efectos combinados del acceso a la atención primaria mediante el Programa de Salud Familiar (PSF) y las transferencias condicionadas de dinero en efectivo del Programa Bolsa Familia (PBF) sobre la mortalidad infantil posneonatal (MIPN) en Brasil. Métodos. Empleé un análisis ecológico longitudinal usando datos en panel de 4 583 municipios brasileños de 1998 al 2010, con 54 253 observaciones en total. Estimé modelos de regresión de efectos fijos por mínimos cuadrados ordinarios, con la tasa de MIPN como la variable dependiente y el PSF, el PBF y sus interacciones como las principales variables independientes de interés. Resultados. La asociación de una mayor cobertura del PSF con una menor tasa de MIPN se volvió más fuerte conforme aumentaba la cobertura del PBF. En los promedios de todas las demás variables, cuando la cobertura de PBF era 25%, la MIPN predicha fue 5,24 (intervalo de confianza [IC] de 95% = 4,95, 5,53) para una cobertura del PSF de 0%, y de 3,54 (IC de 95% = 2,77, 4,31) para una cobertura del PSF de 100%. Cuando la cobertura del PBF era de 60%, la MIPN predicha fue 4,65 (IC de 95% = 4,36, 4,94) para una cobertura del PSF de 0%, y de 1,38 (IC de 95% = 0,88, 1,89) para una cobertura del PSF de 100%. Conclusiones. El efecto del PSF depende de la ampliación del PBF. Para las poblaciones empobrecidas y subatendidas, la combinación de intervenciones tanto del lado de la oferta como del lado de la demanda podría ser necesaria para mejorar los resultados en salud.

Obesity in Korean pre-adolescent school children: comparison of various anthropometric measurements based on bioelectrical impedance analysis.

PubMed

Yoo, S; Lee, S-Y; Kim, K-N; Sung, E

2006-07-01

To examine the relationships between body mass index (BMI), percentage-weight-for-height (PWH) and percentage body fat (PBF), and to compare their validity based on PBF with the BMI criteria of International Obesity Task Force (IOTF) for childhood obesity in Korean pre-adolescent school children. Statistical comparative analysis for anthropometric measures. Korean pre-adolescent children (438 boys and 454 girls, aged 8-12 years, mean BMI 19.5+/-3.4 kg/m2). Body mass index and PWH were calculated as body size indices from height and weight. Hand-to-foot bioelectrical impedance analysis (BIA) was performed to obtain PBF values, with obese children defined as PBF above 35%. Sensitivity and specificity were displayed with the gold standard of PBF, and receiver operating characteristic (ROC) curves were used to assess the performance of BMI and PWH in detecting obesity. The prevalence of obesity varied by the criteria: 18.8% by Korean BMI standards for 95 percentile, 11% by the IOTF-BMI 30 kg/m2 and 29.4% by Korean PWH cutoffs. Body mass index and PWH were significantly correlated with PBF after adjusting for age, 0.910 (P<0.01) and 0.915 (P<0.01), respectively. The sensitivity and specificity of the PWH cutoffs were 0.909 and 0.882, respectively. The local BMI 95 percentiles had lower sensitivity (0.714) and specificity (0.790). The IOTF-BMI definition showed much lower sensitivity (0.457) and higher specificity (0.990). The BMI cutoffs corresponding with the highest accuracy were smaller than IOTF-BMI 30 kg/m2 for all age groups in both boys and girls. The prevalence of obesity among Korean pre-adolescent children widely varied according to the diagnostic criteria applied. Universally recommended cutoffs for children by IOTF showed the lowest sensitivity among the criteria used, and may therefore underestimate obesity in this population.

Physicians’ and nurses’ attitudes towards performance-based financial incentives in Burundi: a qualitative study in the province of Gitega

PubMed Central

Rudasingwa, Martin; Uwizeye, Marie Rose

2017-01-01

ABSTRACT Background: Performance-based financing (PBF) was first implemented in Burundi in 2006 as a pilot programme in three provinces and was rolled out nationwide in 2010. PBF is a reform approach to improve the quality, quantity, and equity of health services and aims at achieving universal health coverage. It focuses on how to best motivate health practitioners. Objective: To elicit physicians’ and nurses’ experiences and views on how PBF influenced and helped them in healthcare delivery. Methods: A qualitative cross-sectional study was carried out among frontline health workers such as physicians and nurses. The data was gathered through individual face-to-face, in-depth, semi-structured interviews with 6 physicians and 30 nurses from February to March 2011 in three hospitals in Gitega Province. A simple framework approach and thematic analysis using a combination of manual technique and MAXQDA software guided the analysis of the interview data. Results: Overall, the interviewees felt that the PBF scheme had provided positive motivation to improve the quality of care, mainly in the structures and process of care. The utilization of health services and the relationship between health practitioners and patients also improved. The salary top-ups were recognized as the most significant impetus to increase effort in improving the quality of care. The small and sometimes delayed financial incentives paid to physicians and nurses were criticized. The findings of this study also indicate that the positive interaction between performance-based incentive schemes and other health policies is crucial in achieving comprehensive improvement in healthcare delivery. Conclusions: PBF has the potential to motivate medical staff to improve healthcare provision. The views of medical staff and the context of the area of implementation have to be taken into consideration when designing and implementing PBF schemes. PMID:28452651

'The money can be a motivator, to me a little, but mostly PBF just helps me to do better in my job.' An exploration of the motivational mechanisms of performance-based financing for health workers in Malawi.

PubMed

Lohmann, Julia; Wilhelm, Danielle; Kambala, Christabel; Brenner, Stephan; Muula, Adamson S; De Allegri, Manuela

2018-03-01

Performance-based financing (PBF) is assumed to improve health care delivery by motivating health workers to enhance their work performance. However, the exact motivational mechanisms through which PBF is assumed to produce such changes are poorly understood to date. Although PBF is increasingly recognized as a complex health systems intervention, its motivational effect for individual health workers is still often reduced to financial 'carrots and sticks' in the literature and discourse. Aiming to contribute to the development of a more comprehensive understanding of the motivational mechanisms, we explored how PBF impacted health worker motivation in the context of the Malawian Results-based Financing for Maternal and Newborn Health (RBF4MNH) Initiative. We conducted in-depth interviews with 41 nurses, medical assistants and clinical officers from primary- and secondary-level health facilities 1 and 2 years after the introduction of RBF4MNH in 2013. Six categories of motivational mechanisms emerged: RBF4MNH motivated health workers to improve their performance (1) by acting as a periodic wake-up call to deficiencies in their day-to-day practice; (2) by providing direction and goals to work towards; (3) by strengthening perceived ability to perform successfully at work and triggering a sense of accomplishment; (4) by instilling feelings of recognition; (5) by altering social dynamics, improving team work towards a common goal, but also introducing social pressure; and (6) by offering a 'nice to have' opportunity to earn extra income. However, respondents also perceived weaknesses of the intervention design, implementation-related challenges and contextual constraints that kept RBF4MNH from developing its full motivating potential. Our results underline PBF's potential to affect health workers' motivation in ways which go far beyond the direct effects of financial rewards to individuals. We strongly recommend considering all motivational mechanisms more explicitly in future PBF design to fully exploit the approach's capacity for enhancing health worker performance. © The Author 2017. Published by Oxford University Press in association with The London School of Hygiene and Tropical Medicine. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Parents' Perspective of the Impact of School Practices on the Functioning of Students with Special Educational Needs

ERIC Educational Resources Information Center

Lui, Ming; Yang, Lan; Sin, Kuen-Fung

2017-01-01

Students with special educational needs (SEN) are at an elevated risk of psychological and behavioural dysfunctions. In this study, we conducted a survey of parents of students with SEN in Hong Kong to examine the impact of two school practices--learning support and school climate--on the psychological and behavioural functioning (PBF) of students…

PBF Reactor Building (PER620). Cubicle 10 area in basement. Highdensity ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF Reactor Building (PER-620). Cubicle 10 area in basement. High-density shielding bricks will protect personnel from radiation coming from in-pile-tube coolant and blowdown tank. Photographer: John Capek. Date: January 26, 1970. INEEL negative no. 70-348 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

PBF Reactor Building (PER620). Detail of fuel test assembly in ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF Reactor Building (PER-620). Detail of fuel test assembly in preparation for test. When complete, it will fit into in-pile tube. The maximum outside diameter of which must be about 8.25 inches. Date: 1982. INEEL negative no. 82-4908 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

PBF (PER620) interior. Detail view across top of reactor tank. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF (PER-620) interior. Detail view across top of reactor tank. Camera facing northeast. Ait tubing is cleanup equipment. Note projections from reactor structure above water level in tank. Date: May 2004. INEEL negative no. HD-41-5-1 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

PBF Cooling Tower (PER720) and its Auxiliary Building (PER625). Camera ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF Cooling Tower (PER-720) and its Auxiliary Building (PER-625). Camera facing west shows east facades. Center pipe carried secondary coolant water from reactor. Building to distributor basin. Date: August 2003. INEEL negative no. HD-35-10-1 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

PBF Cooling Tower (PER720), and Auxiliary Building (PER624). Camera faces ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF Cooling Tower (PER-720), and Auxiliary Building (PER-624). Camera faces north to show south facades. Oblong vertical structure at left of center is weather shield for stairway. Date: August 2003. INEEL negative no. HD-35-10-4 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

PBF Control Building (PER619) floor plan and elevations. Room numbers ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF Control Building (PER-619) floor plan and elevations. Room numbers and functions. Roof plans for "high" roof and rest of roof. Ebasco Services 1205-PER/PER 619-A-1. Date: July 1965. INEEL index no. 760-0619-00-205-123022 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

Infrared-to-visible conversion luminescence of Er 3+ ions in lead borate transparent glass-ceramics

NASA Astrophysics Data System (ADS)

Pisarski, Wojciech A.; Pisarska, Joanna; Lisiecki, Radosław; Grobelny, Łukasz; Dominiak-Dzik, Grażyna; Ryba-Romanowski, Witold

2009-10-01

Transparent glass-ceramics were successfully prepared during controlled heat treatment of lead borate glasses. The PbF 2 particles were dispersed into a borate glass matrix which was evidenced by X-ray diffraction analysis. The phase identification revealed that crystalline peaks can be related to the orthorhombic PbF 2 phase. Green up-conversion luminescence due to the 4S 3/2- 4I 15/2 transition of Er 3+ ions was registered. In comparison to the precursor glass the luminescence intensity was considerably higher, whereas the luminescence linewidth slightly decreased in the studied oxyfluoride transparent glass-ceramics. It indicated that a part of the trivalent erbium was incorporated into the PbF 2 crystalline phase.

[Social exclusion and health inequity: a case study based on a cash distribution program (Bolsa Família) in Brazil].

PubMed

Alves, Hayda; Escorel, Sarah

2013-12-01

To understand the impact of Bolsa Família (PBF), a federal cash transfer program, and to analyze its effects on social inclusion and exclusion processes experienced by low-income families in Brazil, with a focus on the program's potential to help overcome health inequity. This qualitative investigation used a case study methodology including observant participation, review of documents, and semi-structured interviews with current and former PBF beneficiaries, as well as with the program's local managers. The study was conducted in a small city in the state of Rio de Janeiro with a high social exclusion index and 100% coverage by the Family Health Strategy (Estratégia Saúde da Família, ESF) program. The economic, political, social, and cultural dimensions of social exclusion and inclusion processes were used to guide data collection and analysis. The program facilitated social inclusion of low-income families, especially in the economic and social dimensions. Nevertheless, it did not produce the changes desired by the beneficiaries in the work dimension. The effects on the political dimension were limited by the insufficient social engagement of the PBF. The interviewees underscored the positive effects of the ESF, which allowed them to exercise their right to health by granting them wider access to primary health care services. However, these effects appeared to be unrelated to the PBF. The results reveal effects, limitations, and challenges of the PBF towards modifying the social determinants of health inequity, in order to promote more effective changes in the social exclusion/inclusion dynamics affecting low-income families.

Foot-to-foot bioelectrical impedance analysis: a valuable tool for the measurement of body composition in children.

PubMed

Tyrrell, V J; Richards, G; Hofman, P; Gillies, G F; Robinson, E; Cutfield, W S

2001-02-01

To determine the accuracy of foot-to-foot bioelectrical impedance analysis (BIA) and anthropometric indices as measures of body composition in children. Comparison of foot-to-foot BIA and anthropometry to dual-energy X-ray absorptiometry (DEXA)-derived body composition in a multi-ethnic group of children. : Eighty-two European, NZ Maori and Pacific Island children aged 4.9-10.9 y. DEXA body composition, foot-to-foot bioelectrical impedance, height, weight, hip and waist measurements. Using a BIA prediction equation derived from our study population we found a high correlation between DEXA and BIA in the estimation of fat-free mass (FFM), fat mass (FM) and percentage body fat (PBF) (r=0.98, 0.98 and 0.94, respectively). BIA-FFM underestimated DEXA-FFM by a mean of 0.75 kg, BIA-FM overestimated DEXA-FM by a mean of 1.02 kg and BIA-PBF overestimated DEXA-PBF by a mean of 2.53%. The correlation between six anthropometric indices (body mass index (BMI), ponderal index, Chinn's weight-for-height index, BMI standard deviation score, weight-for-length index and Cole's weight-for-height index) and DEXA were also examined. The correlation of these indices with PBF was remarkably similar (r=0.85-0.87), more variable with FM (r=0.77-0.94) and poor with FFM (r=0.41-0.75). BIA correlated better than anthropometric indices in the estimation of FFM, FM and PBF. Foot-to-foot BIA is an accurate technique in the measurement of body composition.

Kinetic Risk Factors of Running-Related Injuries in Female Recreational Runners.

PubMed

Napier, Christopher; MacLean, Christopher L; Maurer, Jessica; Taunton, Jack E; Hunt, Michael A

2018-05-30

Our objective was to prospectively investigate the association of kinetic variables with running-related injury (RRI) risk. Seventy-four healthy female recreational runners ran on an instrumented treadmill while 3D kinetic and kinematic data were collected. Kinetic outcomes were vertical impact transient, average vertical loading rate, instantaneous vertical loading rate, active peak, vertical impulse, and peak braking force (PBF). Participants followed a 15-week half-marathon training program. Exposure time (hours of running) was calculated from start of program until onset of injury, loss to follow-up, or end of program. After converting kinetic variables from continuous to ordinal variables based on tertiles, Cox proportional hazard models with competing risks were fit for each variable independently, before analysis in a forward stepwise multivariable model. Sixty-five participants were included in the final analysis, with a 33.8% injury rate. PBF was the only kinetic variable that was a significant predictor of RRI. Runners in the highest tertile (PBF <-0.27 BW) were injured at 5.08 times the rate of those in the middle tertile and 7.98 times the rate of those in the lowest tertile. When analyzed in the multivariable model, no kinetic variables made a significant contribution to predicting injury beyond what had already been accounted for by PBF alone. Findings from this study suggest PBF is associated with a significantly higher injury hazard ratio in female recreational runners and should be considered as a target for gait retraining interventions. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

Pulpal and Periodontal Tissues Changes Associated with Le Fort I and Sagittal Split Ramus Osteotomies: A review

PubMed Central

Lazaridis, Konstantinos; Athanasiou, Athanasios E.

2018-01-01

Introduction: Le Fort I and sagittal split ramus osteotomies are the most commonly performed orthognathic surgery procedures on the maxilla and mandible, respectively. Techniques: Despite progress in the techniques, these procedures may still be associated with morbidity, expressed as inflammation, inadequate bony union, periodontal damages or in extreme cases even total bone loss. Discussion: Through a comprehensive review of the literature, the influences of maxillary and mandibular surgery on Pulpal Blood Flow (PBF), pulp sensitivity and pulp vitality are examined. Moreover, adverse effects of maxillary surgery on tooth color and periodontal tissues are also reported. The effects had a variety of expression. Concerning maxillary surgery, some studies showed an initial increase in PBF followed by a decrease to the baseline or even lower levels after 1-3 months. Other studies found an initial decrease in PBF followed by an increase soon after. There were also studies that showed no significant PBF changes, in contrast. Conclusion: Concerning mandibular surgery, a recent study showed a decrease in PBF immediately after sagittal split ramus osteotomy. Some authors detected tooth discoloration of maxillary teeth after Le Fort I osteotomy. Root resorption and root injury were also detected, but were of minor significance. Usually, these adverse effects derive from injury of the vessels of the palatal pedicle. This pedicle should be maintained intact for the avoidance of blood flow impairments. In addition, the descending palatine artery should be protected during maxillary surgery procedures in order to maintain the highest possible blood flow on the maxillary teeth. PMID:29456771

PBF Cooling Tower (PER720). Camera faces east to show west ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF Cooling Tower (PER-720). Camera faces east to show west facade. Sloped (louvered) panels in this and opposite facade allow air to enter tower and cool water falling on splash bars within. Date: August 2003. INEEL negative no. HD-35-10-2 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

PBF detail of metal pedestrian bridge over exposed control cables, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF detail of metal pedestrian bridge over exposed control cables, which run between Control (PER-619) and Reactor Buildings (PER-620). Camera facing northwest. Southwest corner of PER-620 at upper right of view. Date: May 2004. INEEL negative no. HD-41-6-3 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

PBF Reactor Building (PER620). Camera facing north toward south facade. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF Reactor Building (PER-620). Camera facing north toward south facade. Note west-wing siding on concrete block; high-bay siding of metal. Excavation and forms for signal and cable trenches proceed from building. Photographer: Kirsh. Date August 20, 1968. INEEL negative no. 68-3332 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

Power Burst Facility (PBF), PER620, contextual and oblique view. Camera ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Power Burst Facility (PBF), PER-620, contextual and oblique view. Camera facing northwest. South and east facade. The 1980 west-wing expansion is left of center bay. Concrete structure at right is PER-730. Date: March 2004. INEEL negative no. HD-41-2-3 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

PBF Control Building (PER619). Interior of control room. Control console ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF Control Building (PER-619). Interior of control room. Control console in center of room. Indicator panels along walls. Window shown in ID-33-F-120 is between control panels at left. Camera facing northwest. Date: May 2004. INEEL negative no. HD-41-7-3 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

PBF Reactor Building (PER620). Camera is facing east and down ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF Reactor Building (PER-620). Camera is facing east and down into canal and storage pit for fuel rod assemblies. Stainless steel liner is being applied, temporarily covered with plywood for protection. Photographer: John Capek. Date: August 29, 1969. INEEL negative no. 69-4641 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

PBF Reactor Building (PER620). Cubicle 10. Camera facing southeast. Loop ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF Reactor Building (PER-620). Cubicle 10. Camera facing southeast. Loop pressurizer on right. Other equipment includes loop strained, control valves, loop piping, pressurizer interchanger, and cleanup system cooler. High-density shielding brick walls. Photographer: Kirsh. Date: November 2, 1970. INEEL negative no. 70-4908 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

Institutional Characteristics That Lead to Increased Student Success Points for Community Colleges in Texas

ERIC Educational Resources Information Center

Hanes, Carol Moore

2017-01-01

Over 40% of undergraduates in the United States attend a community college; however, fewer than 50% complete a degree or certificate within 6 years. As a result, national and state leaders have endorsed completion agenda initiatives, including performance-based funding (PBF). Texas implemented a form of PBF for the 2014-2015 Academic Year (AY)…

Er-doped lead borate glasses and transparent glass ceramics for near-infrared luminescence and up-conversion applications.

PubMed

Pisarski, Wojciech A; Goryczka, Tomasz; Pisarska, Joanna; Ryba-Romanowski, Witold

2007-03-15

Lead borate based glasses have been analyzed using Raman and infrared spectroscopy. The formation of different borate groups and the direction of BO3 <--> BO4 conversion strongly depends on the PbO- and/or PbF2-to-B2O3 ratio in chemical composition. PbF2-PbO-B2O3 based glasses containing Er3+ ions have been studied after annealing. The orthorhombic PbF2 crystallites are formed during thermal treatment, which was evidenced by X-ray diffraction analysis. Near-infrared luminescence at 1530 nm and green up-conversion at 545 nm have been registered for samples before and after annealing. The luminescence bands correspond to 4I13/2-4I15/2 and 4S3/2-4I15/2 transitions of Er3+ ions, respectively. In comparison to the precursor glasses, the luminescence intensities are higher in the studied transparent oxyfluoride glass ceramics. Simultaneously, the half-width of the luminescence lines slightly decreases. It can be the evidence that a small amount of the Er3+ ions is incorporated into the orthorhombic PbF2 phase.

Performance Based Financing and Uptake of Maternal and Child Health Services in Yobe Sate, Northern Nigeria

PubMed Central

Ashir, Garba M.; Doctor, Henry V.; Afenyadu, Godwin Y.

2013-01-01

Reported maternal and child health (MCH) outcomes in Nigeria are amongst the worst in the world, with Nigeria second only to India in the number of maternal deaths. At the national level, maternal mortality ratios (MMRs) are estimated at 630 deaths per 100,000 live births (LBs) but vary from as low as 370 deaths per 100,000 LBs in the southern states to over 1,000 deaths per 100,000 LBs in the northern states. We report findings from a performance based financing (PBF) pilot study in Yobe State, northern Nigeria aimed at improving MCH outcomes as part of efforts to find strategies aimed at accelerating attainment of Millennium Development Goals for MCH. Results show that the demand-side PBF led to increased utilization of key MCH services (antenatal care and skilled delivery) but had no significant effect on completion of child immunization using measles as a proxy indicator. We discuss these results within the context of PBF schemes and the need for a careful consideration of all the critical processes and risks associated with demand-side PBF schemes in improving MCH outcomes in the study area and similar settings. PMID:23618473

Third strike for Idaho reactor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Crawford, M.

Differing opinions concerning the modification of the Power Burst Facility (PBF) at Idaho Falls to turn the facility into a research and cancer treatment center are reported. Energy Secretary James Watkins convened an independent panel to examine once again the merits of converting the PBF, and the committee concluded that there is neither enough information currently available sufficiently encouraging to convert the PBF or to maintain it for this purpose. Idaho legislators have used their influence to include $13 million in the Department of Energy 1991 budget for design studies, limited reactor modifications, and maintenance. After the report of themore » committee, Secretary Watkins must decide to either ask congress to rescind the $13 million appropriated for 1991 or spend money to close down the reactor in 1992.« less

PBF Reactor Building (PER620). Camera faces south toward verticallift door, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF Reactor Building (PER-620). Camera faces south toward vertical-lift door, which is closed. Note crane and its trolley positioned near door; its rails along side walls. Reactor vessel and lifting beams are positioned above reactor pit. Photographer: John Capek. Date: January 9, 1970. INEEL negative no. 70-132 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

PBF Cooling Tower under construction. Cold water basin is five ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF Cooling Tower under construction. Cold water basin is five feet deep. Foundation and basin walls are reinforced concrete. Camera facing west. Pipe openings through wall in front are outlets for return flow of cool water to reactor building. Photographer: John Capek. Date: September 4, 1968. INEEL negative no. 68-3473 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

PBF Cooling Tower. Hot deck of Cooling Tower with fan ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF Cooling Tower. Hot deck of Cooling Tower with fan motors in place. Fan's propeller blades (not in view) rotate within lower portion of vents. Inlet pipe is a left of view. Contractor's construction buildings in view to right. Photographer: Larry Page. Date: June 30, 1969. INEEL negative no. 69-3781 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

Quality of Care in Performance-Based Financing: How It Is Incorporated in 32 Programs Across 28 Countries

PubMed Central

Gergen, Jessica; Josephson, Erik; Coe, Martha; Ski, Samantha; Madhavan, Supriya; Bauhoff, Sebastian

2017-01-01

ABSTRACT Objective: To describe how quality of care is incorporated into performance-based financing (PBF) programs, what quality indicators are being used, and how these indicators are measured and verified. Methods: An exploratory scoping methodology was used to characterize the full range of quality components in 32 PBF programs, initiated between 2008 and 2015 in 28 low- and middle-income countries, totaling 68 quality tools and 8,490 quality indicators. The programs were identified through a review of the peer-reviewed and gray literature as well as through expert consultation with key donor representatives. Findings: Most of the PBF programs were implemented in sub-Saharan Africa and most were funded primarily by the World Bank. On average, PBF quality tools contained 125 indicators predominately assessing maternal, newborn, and child health and facility management and infrastructure. Indicators were primarily measured via checklists (78%, or 6,656 of 8,490 indicators), which largely (over 90%) measured structural aspects of quality, such as equipment, beds, and infrastructure. Of the most common indicators across checklists, 74% measured structural aspects and 24% measured processes of clinical care. The quality portion of the payment formulas were in the form of bonuses (59%), penalties (27%), or both (hybrid) (14%). The median percentage (of a performance payment) allocated to health facilities was 60%, ranging from 10% to 100%, while the median percentage allocated to health care providers was 55%, ranging from 20% to 80%. Nearly all of the programs included in the analysis (91%, n=29) verified quality scores quarterly (every 3 months), typically by regional government teams. Conclusion: PBF is a potentially appealing instrument to address shortfalls in quality of care by linking verified performance measurement with strategic incentives and could ultimately help meet policy priorities at the country and global levels, including the ambitious Sustainable Development Goals. The substantial variation and complexity in how PBF programs incorporate quality of care considerations suggests a need to further examine whether differences in design are associated with differential program impacts. PMID:28298338

Quality of Care in Performance-Based Financing: How It Is Incorporated in 32 Programs Across 28 Countries.

PubMed

Gergen, Jessica; Josephson, Erik; Coe, Martha; Ski, Samantha; Madhavan, Supriya; Bauhoff, Sebastian

2017-03-24

To describe how quality of care is incorporated into performance-based financing (PBF) programs, what quality indicators are being used, and how these indicators are measured and verified. An exploratory scoping methodology was used to characterize the full range of quality components in 32 PBF programs, initiated between 2008 and 2015 in 28 low- and middle-income countries, totaling 68 quality tools and 8,490 quality indicators. The programs were identified through a review of the peer-reviewed and gray literature as well as through expert consultation with key donor representatives. Most of the PBF programs were implemented in sub-Saharan Africa and most were funded primarily by the World Bank. On average, PBF quality tools contained 125 indicators predominately assessing maternal, newborn, and child health and facility management and infrastructure. Indicators were primarily measured via checklists (78%, or 6,656 of 8,490 indicators), which largely (over 90%) measured structural aspects of quality, such as equipment, beds, and infrastructure. Of the most common indicators across checklists, 74% measured structural aspects and 24% measured processes of clinical care. The quality portion of the payment formulas were in the form of bonuses (59%), penalties (27%), or both (hybrid) (14%). The median percentage (of a performance payment) allocated to health facilities was 60%, ranging from 10% to 100%, while the median percentage allocated to health care providers was 55%, ranging from 20% to 80%. Nearly all of the programs included in the analysis (91%, n=29) verified quality scores quarterly (every 3 months), typically by regional government teams. PBF is a potentially appealing instrument to address shortfalls in quality of care by linking verified performance measurement with strategic incentives and could ultimately help meet policy priorities at the country and global levels, including the ambitious Sustainable Development Goals. The substantial variation and complexity in how PBF programs incorporate quality of care considerations suggests a need to further examine whether differences in design are associated with differential program impacts. © Gergen et al.

Impact of implementing performance-based financing on childhood malnutrition in Rwanda.

PubMed

Binagwaho, Agnes; Condo, Jeanine; Wagner, Claire; Ngabo, Fidele; Karema, Corine; Kanters, Steve; Forrest, Jamie I; Bizimana, Jean de Dieu

2014-11-04

Malnutrition remains a serious concern in Rwanda, particularly among children under-5 years. Performance-based financing (PBF), an innovative health systems financing strategy, has been implemented at the national level since 2008. This study aimed to assess the impact of PBF and other factors associated with the prevalence of three classifications of malnutrition (stunting, wasting and underweight) in children under-5 years in Rwanda. The study is a cross-sectional study comprising of 713 children under five years old from 557 households, whose anthropometric measurements (height, weight and age) had been obtained as part of the 2008 Rwanda General Health and HIV household survey. Z-scores for height-for-age, weight-for-age, weight-for-height, and body mass index-for-age were analyzed according to the World Health Organization 2006 Child Growth Standards. Random intercept logistic regression models were used to regress each anthropometric measure (WAZ, HAZ and WHZ) against child, maternal and household characteristics. Child participants ranged in age from 0 to 60 months, 20.2% of children were under 12 months and 5.1% were HIV positive. The prevalence of wasting was 8.8%; of stunting was 58.4%; and of underweight status was 20.7%. Maternal emotional and social wellbeing was protective of wasting in children under-5 years of age. Living in districts implementing PBF was protective of wasting (Adjusted Odds Ratio: 0.43; 95% confidence interval: 0.19-0.97). Living in a district with PBF was not found to be associated with either stunting or underweight status among children under-5. PBF may have a protective association with particular forms of malnutrition among children under-5 years in Rwanda. These findings warrant further investigation in relation to the impact of implementing innovative financing schemes on health outcomes.

A study on the implementation fidelity of the performance-based financing policy in Burkina Faso after 12 months.

PubMed

Bodson, Oriane; Barro, Ahmed; Turcotte-Tremblay, Anne-Marie; Zanté, Nestor; Somé, Paul-André; Ridde, Valéry

2018-01-01

Performance-based financing (PBF) in the health sector has recently gained momentum in low- and middle-income countries (LMICs) as one of the ways forward for achieving Universal Health Coverage. The major principle underlying PBF is that health centers are remunerated based on the quantity and quality of services they provide. PBF has been operating in Burkina Faso since 2011, and as a pilot project since 2014 in 15 health districts randomly assigned into four different models, before an eventual scale-up. Despite the need for expeditious documentation of the impact of PBF, caution is advised to avoid adopting hasty conclusions. Above all, it is crucial to understand why and how an impact is produced or not. Our implementation fidelity study approached this inquiry by comparing, after 12 months of operation, the activities implemented against what was planned initially and will make it possible later to establish links with the policy's impacts. Our study compared, in 21 health centers from three health districts, the implementation of activities that were core to the process in terms of content, coverage, and temporality. Data were collected through document analysis, as well as from individual interviews and focus groups with key informants. In the first year of implementation, solid foundations were put in place for the intervention. Even so, implementation deficiencies and delays were observed with respect to certain performance auditing procedures, as well as in payments of PBF subsidies, which compromised the incentive-based rationale to some extent. Over next months, efforts should be made to adjust the intervention more closely to context and to the original planning.

Are health workers motivated by income? Job motivation of Cambodian primary health workers implementing performance-based financing.

PubMed

Khim, Keovathanak

2016-01-01

Financial incentives are widely used in performance-based financing (PBF) schemes, but their contribution to health workers' incomes and job motivation is poorly understood. Cambodia undertook health sector reform from the middle of 2009 and PBF was employed as a part of the reform process. This study examines job motivation for primary health workers (PHWs) under PBF reform in Cambodia and assesses the relationship between job motivation and income. A cross-sectional self-administered survey was conducted on 266 PHWs, from 54 health centers in the 15 districts involved in the reform. The health workers were asked to report all sources of income from public sector jobs and provide answers to 20 items related to job motivation. Factor analysis was conducted to identify the latent variables of job motivation. Factors associated with motivation were identified through multivariable regression. PHWs reported multiple sources of income and an average total income of US$190 per month. Financial incentives under the PBF scheme account for 42% of the average total income. PHWs had an index motivation score of 4.9 (on a scale from one to six), suggesting they had generally high job motivation that was related to a sense of community service, respect, and job benefits. Regression analysis indicated that income and the perception of a fair distribution of incentives were both statistically significant in association with higher job motivation scores. Financial incentives used in the reform formed a significant part of health workers' income and influenced their job motivation. Improving job motivation requires fixing payment mechanisms and increasing the size of incentives. PBF is more likely to succeed when income, training needs, and the desire for a sense of community service are addressed and institutionalized within the health system.

Performance-based financing to increase utilization of maternal health services: Evidence from Burkina Faso.

PubMed

Steenland, Maria; Robyn, Paul Jacob; Compaore, Philippe; Kabore, Moussa; Tapsoba, Boukary; Zongo, Aloys; Haidara, Ousmane Diadie; Fink, Günther

2017-12-01

Performance-based financing (PBF) programs are increasingly implemented in low and middle-income countries to improve health service quality and utilization. In April 2011, a PBF pilot program was launched in Boulsa, Leo and Titao districts in Burkina Faso with the objective of increasing the provision and quality of maternal health services. We evaluate the impact of this program using facility-level administrative data from the national health management information system (HMIS). Primary outcomes were the number of antenatal care visits, the proportion of antenatal care visits that occurred during the first trimester of pregnancy, the number of institutional deliveries and the number of postnatal care visits. To assess program impact we use a difference-in-differences approach, comparing changes in health service provision post-introduction with changes in matched comparison areas. All models were estimated using ordinary least squares (OLS) regression models with standard errors clustered at the facility level. On average, PBF facilities had 2.3 more antenatal care visits (95% CI [0.446-4.225]), 2.1 more deliveries (95% CI [0.034-4.069]) and 9.5 more postnatal care visits (95% CI [6.099, 12.903]) each month after the introduction of PBF. Compared to the service provision levels prior to the interventions, this implies a relative increase of 27.7 percent for ANC, of 9.2 percent for deliveries, and of 118.7 percent for postnatal care. Given the positive results observed during the pre-pilot period and the limited resources available in the health sector, the PBF program in Burkina Faso may be a low-cost, high impact intervention to improve maternal and child health.

Examining the Associations among Fibrocystic Breast Change, Total Lean Mass, and Percent Body Fat.

PubMed

Chen, Yuan-Yuei; Fang, Wen-Hui; Wang, Chung-Ching; Kao, Tung-Wei; Chang, Yaw-Wen; Yang, Hui-Fang; Wu, Chen-Jung; Sun, Yu-Shan; Chen, Wei-Liang

2018-06-15

Fibrocystic breast change (FBC) is extremely common and occurrs in 90% of women during their lives. The association between body composition and risk of breast cancer is well established. We hypothesized that the effect might exist during the development of FBC. Our aim was to examine the relationships of total lean mass (TLM) and percent body fat (PBF) with FBC in a general female population. In total, 8477 female subjects aged 20 years or older were enrolled in the study at the Tri-Service General Hospital in Taiwan from 2011 to 2016. Comprehensive examinations including biochemical data, measurements of body composition and breast ultrasound were performed. PBF was positively associated with the presence of FBC (OR = 1.039, 95%CI: 1.018-1.060), and TLM showed the opposite result (OR = 0.893, 95%CI: 0.861-0.926). Condition of metabolic syndrome (MetS), diabetes (DM) and fatty liver modified the association between PBF and FBC (P < 0.001, P = 0.032 and P = 0.007, respectively). Female subjects diagnosed with MetS, DM, and fatty liver had higher risk of developing FBC than control subjects (OR = 1.110, 95%CI: 1.052-1.171; OR = 1.144, 95%CI: 1.024-1.278; OR = 1.049, 95%CI: 1.019, 1.080). Those with higher PBF (for highest quartile versus lowest, OR = 2.451, 95%CI: 1.523-3.944) or lower TLM (for highest quartile versus lowest, OR = 0.279, 95%CI: 0.171-0.455) had increased risk of developing FBC. In conclusion, increased PBF and reduced TLM were likely to predict the risk of the presence of FBC in a general female population.

PBF Reactor Building (PER620). Camera is in cab of electricpowered ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF Reactor Building (PER-620). Camera is in cab of electric-powered rail crane and facing east. Reactor pit and storage canal have been shaped. Floors for wings on east and west side are above and below reactor in view. Photographer: Larry Page. Date: August 23, 1967. INEEL negative no. 67-4403 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

Twelve months of implementation of health care performance‐based financing in Burkina Faso: A qualitative multiple case study

PubMed Central

Yaogo, Maurice; Zongo, Sylvie; Somé, Paul‐André; Turcotte‐Tremblay, Anne‐Marie

2017-01-01

Abstract To improve health services' quantity and quality, African countries are increasingly engaging in performance‐based financing (PBF) interventions. Studies to understand their implementation in francophone West Africa are rare. This study analysed PBF implementation in Burkina Faso 12 months post‐launch in late 2014. The design was a multiple and contrasted case study involving 18 cases (health centres). Empirical data were collected from observations, informal (n = 224) and formal (n = 459) interviews, and documents. Outside the circle of persons trained in PBF, few in the community had knowledge of it. In some health centres, the fact that staff were receiving bonuses was intentionally not announced to populations and community leaders. Most local actors thought PBF was just another project, but the majority appreciated it. There were significant delays in setting up agencies for performance monitoring, auditing, and contracting, as well as in the payment. The first audits led rapidly to coping strategies among health workers and occasionally to some staging beforehand. No community‐based audits had yet been done. Distribution of bonuses varied from one centre to another. This study shows the importance of understanding the implementation of public health interventions in Africa and of uncovering coping strategies. PMID:28671285

Blood-flow change and recovery of sensibility in the maxillary dental pulp during and after maxillary distraction: a pilot study.

PubMed

Harada, Kiyoshi; Sato, Masaru; Omura, Ken

2004-11-01

To examine the change in blood flow and recovery of sensibility in the maxillary dental pulp during and after maxillary distraction. The subjects included 5 patients undergoing high Le Fort I osteotomy and maxillary distraction (D-group) and a reference group of 14 patients who underwent a common single-segment Le Fort I osteotomy, 1-stage maxillary advancement, and mandibular setback surgery (C-group). Eleven (D-group) and 54 (C-group) maxillary incisors were assessed preoperatively and at 1-7 days, 14 days, and 3 months postoperatively. Pulpal blood flow (PBF) was measured by laser Doppler flowmetry, and pulpal sensibility (PS) was investigated by electrodiagnostics. From postoperative days 1 to 5 (the latency period), the PBF tended to be higher in the D-group than in the C-group. From day 6 to 3 months postoperatively (during and after maxillary distraction), the PBF values of the 2 groups were similar. The PS remained negative up to 14 days postoperatively in both groups. However, at 3 months after the operation, a higher proportion (90.9%) of teeth in the D-group was positive for PS. These results suggest that maxillary distraction is a favorable technique for maintenance of PBF and recovery of PS in the maxillary teeth after surgery.

Longitudinal associations between key dietary behaviors and weight gain over time: Transitions through the adolescent years

PubMed Central

Laska, Melissa N.; Murray, David M.; Lytle, Leslie A.; Harnack, Lisa J.

2012-01-01

Previous studies have yielded inconsistent results in documenting the association between key dietary factors and adolescent weight change over time. The purpose of this study was to examine the extent to which changes in adolescent sugar-sweetened beverage, diet soda, breakfast and fast food consumption were associated with changes in BMI and percent body fat (PBF), both cross-sectionally and longitudinally. Our sample included 693 Minnesota adolescents followed over two years. Adjusting for physical activity, puberty, race, socio-economic status, age, and total energy intake, cross-sectional findings indicated that for both males and females, diet soda consumption was significantly and positively associated with BMI and PBF, and breakfast intake was significantly and negatively associated with BMI and PBF among girls. In longitudinal analyses, however, there were no significant associations after adjusting for the number of tests performed. This study adds to previous research through its methodological strengths, including adjustment for physical activity and energy intake assessed using state-of-the-art methods (i.e., accelerometers and 24-hour dietary recalls), as well as its evaluation of both BMI and PBF. Additional research is needed to better understand the complex constellation of factors that contribute to adolescent weight gain over time. PMID:21701567

PBF Reactor Building (PER620). Camera faces south along west wall. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF Reactor Building (PER-620). Camera faces south along west wall. Gap between native lava rock and concrete basement walls is being backfilled and compacted. Wire mesh protects workers from falling rock. Note penetrations for piping that will carry secondary coolant water to Cooling Tower. Photographer: Holmes. Date: June 15, 1967. INEEL negative no. 67-3665 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

PBF Cooling Tower and it Auxiliary Building (PER624) to left ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF Cooling Tower and it Auxiliary Building (PER-624) to left of tower. Camera facing west and the east louvered face of the tower. Details include secondary coolant water riser piping and flow control valves (butterfly valves) to distribute water evenly to all sections of tower. Photographer: Holmes. Date: May, 20, 1970. INEEL negative no. 70-2322 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

Thermographic Measurements of the Commercial Laser Powder Bed Fusion Process at NIST

PubMed Central

Lane, Brandon; Moylan, Shawn; Whitenton, Eric; Ma, Li

2016-01-01

Measurement of the high-temperature melt pool region in the laser powder bed fusion (L-PBF) process is a primary focus of researchers to further understand the dynamic physics of the heating, melting, adhesion, and cooling which define this commercially popular additive manufacturing process. This paper will detail the design, execution, and results of high speed, high magnification in-situ thermographic measurements conducted at the National Institute of Standards and Technology (NIST) focusing on the melt pool region of a commercial L-PBF process. Multiple phenomena are observed including plasma plume and hot particle ejection from the melt region. The thermographic measurement process will be detailed with emphasis on the ‘measurability’ of observed phenomena and the sources of measurement uncertainty. Further discussion will relate these thermographic results to other efforts at NIST towards L-PBF process finite element simulation and development of in-situ sensing and control methodologies. PMID:28058036

Thermographic Measurements of the Commercial Laser Powder Bed Fusion Process at NIST.

PubMed

Lane, Brandon; Moylan, Shawn; Whitenton, Eric; Ma, Li

2016-01-01

Measurement of the high-temperature melt pool region in the laser powder bed fusion (L-PBF) process is a primary focus of researchers to further understand the dynamic physics of the heating, melting, adhesion, and cooling which define this commercially popular additive manufacturing process. This paper will detail the design, execution, and results of high speed, high magnification in-situ thermographic measurements conducted at the National Institute of Standards and Technology (NIST) focusing on the melt pool region of a commercial L-PBF process. Multiple phenomena are observed including plasma plume and hot particle ejection from the melt region. The thermographic measurement process will be detailed with emphasis on the 'measurability' of observed phenomena and the sources of measurement uncertainty. Further discussion will relate these thermographic results to other efforts at NIST towards L-PBF process finite element simulation and development of in-situ sensing and control methodologies.

PBF Cooling Tower. View from highbay roof of Reactor Building ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF Cooling Tower. View from high-bay roof of Reactor Building (PER-620). Camera faces northwest. East louvered face has been installed. Inlet pipes protrude from fan deck. Two redwood vents under construction at top. Note piping, control, and power lines at sub-grade level in trench leading to Reactor Building. Photographer: Kirsh. Date: June 6, 1969. INEEL negative no. 69-3466 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

PBF Reactor Building (PER620). Camera facing southeast in second basement. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF Reactor Building (PER-620). Camera facing southeast in second basement. Round form and reinforcing steel surround reactor vessel pit, which will be heavily shielded by several feet of concrete. Block-out is for door to sub-pile room. Rectangular form and rebar beyond pit is for canal wall. Photographer: John Capek. Date: March 10, 1967. INEEL negative no. 67-1643 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

Single-Event Effect Testing of the Linear Technology LTC6103HMS8#PBF Current Sense Amplifier

NASA Technical Reports Server (NTRS)

Yau, Ka-Yen; Campola, Michael J.; Wilcox, Edward

2016-01-01

The LTC6103HMS8#PBF (henceforth abbreviated as LTC6103) current sense amplifier from Linear Technology was tested for both destructive and non-destructive single-event effects (SEE) using the heavy-ion cyclotron accelerator beam at Lawrence Berkeley National Laboratory (LBNL) Berkeley Accelerator Effects (BASE) facility. During testing, the input voltages and output currents were monitored to detect single event latch-up (SEL) and single-event transients (SETs).

Twelve months of implementation of health care performance-based financing in Burkina Faso: A qualitative multiple case study.

PubMed

Ridde, Valéry; Yaogo, Maurice; Zongo, Sylvie; Somé, Paul-André; Turcotte-Tremblay, Anne-Marie

2018-01-01

To improve health services' quantity and quality, African countries are increasingly engaging in performance-based financing (PBF) interventions. Studies to understand their implementation in francophone West Africa are rare. This study analysed PBF implementation in Burkina Faso 12 months post-launch in late 2014. The design was a multiple and contrasted case study involving 18 cases (health centres). Empirical data were collected from observations, informal (n = 224) and formal (n = 459) interviews, and documents. Outside the circle of persons trained in PBF, few in the community had knowledge of it. In some health centres, the fact that staff were receiving bonuses was intentionally not announced to populations and community leaders. Most local actors thought PBF was just another project, but the majority appreciated it. There were significant delays in setting up agencies for performance monitoring, auditing, and contracting, as well as in the payment. The first audits led rapidly to coping strategies among health workers and occasionally to some staging beforehand. No community-based audits had yet been done. Distribution of bonuses varied from one centre to another. This study shows the importance of understanding the implementation of public health interventions in Africa and of uncovering coping strategies. © 2017 The Authors. The International Journal of Health Planning and Management Published by John Wiley & Sons Ltd.

A Metallurgical Evaluation of the Powder-Bed Laser Additive Manufactured 4140 Steel Material

NASA Astrophysics Data System (ADS)

Wang, Wesley; Kelly, Shawn

2016-03-01

Using laser powder bed fusion (PBF-L) additive manufacturing (AM) process for steel or iron powder has been attempted for decades. This work used a medium carbon steel (AISI 4140) powder to explore the feasibility of AM. The high carbon equivalent of 4140 steel (CEIIW ≈ 0.83) has a strong tendency toward cold cracking. As such, the process parameters must be carefully controlled to ensure the AM build quality. Through an orthogonally designed experimental matrix, a laser-welding procedure was successfully developed to produce 4140 steel AM builds with no welding defects. In addition, the microstructure and micro-cleanliness of the as-welded PBF-L AM builds were also examined. The results showed an ultra-fine martensite lath structure and an ultra-clean internal quality with minimal oxide inclusion distribution. After optimizing the PBF-L AM process parameters, including the laser power and scan speed, the as-welded AM builds yielded an average tensile strength higher than 1482 MPa and an average 33 J Charpy V-notch impact toughness at -18°C. The surface quality, tensile strength, and Charpy V-notch impact toughness of AM builds were comparable to the wrought 4140 steel. The excellent mechanical properties of 4140 steel builds created by the PBF-L AM AM process make industrial production more feasible, which shows great potential for application in the aerospace, automobile, and machinery industries.

Slow neutron total cross-section, transmission and reflection calculation for poly- and mono-NaCl and PbF2 crystals

NASA Astrophysics Data System (ADS)

Mansy, Muhammad S.; Adib, M.; Habib, N.; Bashter, I. I.; Morcos, H. N.; El-Mesiry, M. S.

2016-10-01

A detailed study about the calculation of total neutron cross-section, transmission and reflection from crystalline materials was performed. The developed computer code is approved to be sufficient for the required calculations, also an excellent agreement has been shown when comparing the code results with the other calculated and measured values. The optimal monochromator and filter parameters were discussed in terms of crystal orientation, mosaic spread, and thickness. Calculations show that 30 cm thick of PbF2 poly-crystal is an excellent cold neutron filter producing neutron wavelengths longer than 0.66 nm needed for the investigation of magnetic structure experiments. While mono-crystal filter PbF2 cut along its (1 1 1), having mosaic spread (η = 0.5°) and thickness 10 cm can only transmit thermal neutrons of the desired wavelengths and suppress epithermal and γ-rays forming unwanted background, when it is cooled to liquid nitrogen temperature. NaCl (2 0 0) and PbF2 (1 1 1) monochromator crystals having mosaic spread (η = 0.5°) and thickness 10 mm shows high neutron reflectivity for neutron wavelengths (λ = 0.114 nm and λ = 0.43 nm) when they used as a thermal and cold neutron monochromators respectively with very low contamination from higher order reflections.

[Telephone support for breastfeeding by primary care: a randomised multicentre trial].

PubMed

Balaguer Martínez, Josep Vicent; Valcarce Pérez, Inmaculada; Esquivel Ojeda, Jessica Noelia; Hernández Gil, Alicia; Martín Jiménez, María Del Pilar; Bernad Albareda, Mercè

2018-03-22

To evaluate a telephone support programme for mothers who breastfeed for the first 6 months. A randomised unmasked clinical trial was conducted in 5 urban Primary Care centres that included mothers with healthy newborns who were breastfeeding exclusively (EBF) or partially (PBF). The control group received the usual care. The intervention group also received telephone support for breastfeeding on a weekly basis for the first 2months and then every 2weeks until the sixth month. The type of breastfeeding was recorded in the usual check-up visit (1, 2, 4 and 6 months). The study included 193 patients in the intervention group, and 187 in a control group. The greatest increase in the percentage of EBF was observed at 6 months: 21.4% in the control group compared to 30.1% in the intervention group. However, in the adjusted odds ratios analysis, confidence intervals did not show statistical significance. The odds ratio at 1 month, 2 months, 4 months, and 6 months for EBF were 1.45 (0.91-2.31), 1.35 (0.87-2.08), 1.21 (0.80-1.81), and 1.58 (0.99-2.53), respectively. The odds ratio in the same age groups for any type of breastfeeding (EBF + PBF) were 1.65 (0.39-7.00), 2.08 (0.94-4.61), 1.37 (0.79-2.38), and 1.60 (0.98-2.61), respectively. Telephone intervention was not effective enough to generalise it. Copyright © 2018. Publicado por Elsevier España, S.L.U.

Trend of Body Compositions with Aging among Chinese Adolescents, Adults and Elders.

PubMed

Xu, T; Zhu, G; Han, S

2015-12-01

Rare reports can be found about sex- and age-specific body composition survey among Chinese population. The aim of this study is to explore the change of sex-specific body compositions with aging among Chinese adolescents, adults and elders. In a large-scale population survey about physiological constants and health conditions, 75,714 subjects who aged from 8 to 80 completed body composition array. Body mass index (BMI), percentage body fat (PBF), water percentage of body weight (WPBW), water percentage of lean body mass (WPLBM), fat-free mass index (FFMI) and basic metabolic rate were examined with Biodynamics BI-310 body composition analyzer. General obesity is defined as BMI equal to or greater than 28 kg/m2. The prevalence rates of general obesity were 9.4% for males and 7.7% for females respectively. With aging, PBF and FMI showed a U-shape curvilinear trend and WPBW showed a parabolic trend for males. At same age group: 18-19 age groups, PBF and FMI declined to the valley and WPBW rose to the peak. For females, PBF, WPBW and FMI changed in a linear trend. The values of WPLBM and FFMI showed same curvilinear trend for two genders. WPLBM changed in a U-shape trend and touched the valley in twenties for males and in 18-19 age groups for females. The value of FFMI was larger for older age groups in the younger generation but smaller in the older generation. A parabolic trend peaking was seen in the thirties for males and in the forties for females. Regression models with age as independent variable showed that the larger rate of increase of PBF and smaller rates of increase for WPBM and WPLBM with aging for males. This study presents detailed data about sex-specific body composition conditions. Different change trend with aging was found about body composition conditions.

Application of receiver operating characteristic curve in the assessment of the value of body mass index, waist circumference and percentage of body fat in the Diagnosis of Polycystic Ovary Syndrome in childbearing women.

PubMed

Dou, Pan; Ju, Huiyan; Shang, Jing; Li, Xueying; Xue, Qing; Xu, Yang; Guo, Xiaohui

2016-08-24

There are various parameters to analyze obesity, however, no standard reference to predict, screen or diagnose PCOS with various obesity parameters has been established, and the accuracy of these parameters still needs to be studied.This study was to use the receiver operating characteristic (ROC) curve to explore the different values of three obesity parameters, body mass index (BMI), waist circumference (WC) and percentage of body fat (PBF) in the diagnosis of polycystic ovary syndrome (PCOS) in Chinese childbearing women. Three hundred patients who were diagnosed with PCOS at Center of Reproductive Medicine and Genetics of Peking University First Hospital were enrolled in this study, and 110 healthy age-matched women were enrolled as controls. The characteristics of BMI, WC and PBF in PCOS patients were analyzed. Compared with the control group, all the three obesity parameters were significantly increased in PCOS group. In terms of ROC area under the curve, WC > PBF > BMI, and they were all significantly different from those of the control. At a cut-off point of 80.5 cm, WC has a sensitivity of 73.6 % and a specificity of 85 % in diagnosis of PCOS; At a cut-off point of 29 %, PBF has a sensitivity of 88.2 % and a specificity of 57.7 % in diagnosis of PCOS; and at a cut-off point of 26.6 kg/m(2), BMI has a sensitivity of 54.5 % and a specificity of 98 % in diagnosis of PCOS. WC, BMI and PBF are valuable in screening and diagnosis of PCOS in Chinese childbearing women. PBF can be used to screen PCOS as it has a better sensitivity, while BMI can be used in the diagnosis of PCOS as it has a better specificity.

Are health workers motivated by income? Job motivation of Cambodian primary health workers implementing performance-based financing

PubMed Central

Khim, Keovathanak

2016-01-01

Background Financial incentives are widely used in performance-based financing (PBF) schemes, but their contribution to health workers’ incomes and job motivation is poorly understood. Cambodia undertook health sector reform from the middle of 2009 and PBF was employed as a part of the reform process. Objective This study examines job motivation for primary health workers (PHWs) under PBF reform in Cambodia and assesses the relationship between job motivation and income. Design A cross-sectional self-administered survey was conducted on 266 PHWs, from 54 health centers in the 15 districts involved in the reform. The health workers were asked to report all sources of income from public sector jobs and provide answers to 20 items related to job motivation. Factor analysis was conducted to identify the latent variables of job motivation. Factors associated with motivation were identified through multivariable regression. Results PHWs reported multiple sources of income and an average total income of US$190 per month. Financial incentives under the PBF scheme account for 42% of the average total income. PHWs had an index motivation score of 4.9 (on a scale from one to six), suggesting they had generally high job motivation that was related to a sense of community service, respect, and job benefits. Regression analysis indicated that income and the perception of a fair distribution of incentives were both statistically significant in association with higher job motivation scores. Conclusions Financial incentives used in the reform formed a significant part of health workers’ income and influenced their job motivation. Improving job motivation requires fixing payment mechanisms and increasing the size of incentives. PBF is more likely to succeed when income, training needs, and the desire for a sense of community service are addressed and institutionalized within the health system. PMID:27319575

Setting performance-based financing in the health sector agenda: a case study in Cameroon.

PubMed

Sieleunou, Isidore; Turcotte-Tremblay, Anne-Marie; Fotso, Jean-Claude Taptué; Tamga, Denise Magne; Yumo, Habakkuk Azinyui; Kouokam, Estelle; Ridde, Valery

2017-08-01

More than 30 countries in sub-Saharan Africa have introduced performance-based financing (PBF) in their healthcare systems. Yet, there has been little research on the process by which PBF was put on the national policy agenda in Africa. This study examines the policy process behind the introduction of PBF program in Cameroon. The research is an explanatory case study using the Kingdon multiple streams framework. We conducted a document review and 25 interviews with various types of actors involved in the policy process. We conducted thematic analysis using a hybrid deductive-inductive approach for data analysis. By 2004, several reports and events had provided evidence on the state of the poor health outcomes and health financing in the country, thereby raising awareness of the situation. As a result, decision-makers identified the lack of a suitable health financing policy as an important issue that needed to be addressed. The change in the political discourse toward more accountability made room to test new mechanisms. A group of policy entrepreneurs from the World Bank, through numerous forms of influence (financial, ideational, network and knowledge-based) and building on several ongoing reforms, collaborated with senior government officials to place the PBF program on the agenda. The policy changes occurred as the result of two open policy windows (i.e. national and international), and in both instances, policy entrepreneurs were able to couple the policy streams to effect change. The policy agenda of PBF in Cameroon underlined the importance of a perceived crisis in the policy reform process and the advantage of building a team to carry forward the policy process. It also highlighted the role of other sources of information alongside scientific evidence (eg.: workshop and study tour), as well as the role of previous policies and experiences, in shaping or influencing respectively the way issues are framed and reformers' actions and choices.

The effect of oxygen content during an initial sustained inflation on heart rate in asphyxiated near-term lambs.

PubMed

Sobotka, K S; Ong, T; Polglase, G R; Crossley, K J; Moss, T J M; Hooper, S B

2015-07-01

At birth, an initial sustained inflation (SI) uniformly aerates the lungs, increases arterial oxygenation and rapidly improves circulatory recovery in asphyxiated newborns. We hypothesised that lung aeration, in the absence of an increase in arterial oxygenation, can increase heart rate (HR) in asphyxiated near-term lambs. Lambs were delivered and instrumented at 139±2 days of gestation. Asphyxia was induced by umbilical cord clamping and then delaying the onset of ventilation until mean carotid arterial pressures (CAPs) had decreased <20 mm Hg. Lambs then received a single 30-s SI using nitrogen (N2; n=6), 5% oxygen (O2; n=6), 21% O2 (n=6) or 100% O2 (n=6) followed by ventilation in air for 30 min. HR, CAP and pulmonary blood flow (PBF) were continuously recorded. HR and PBF increased more quickly in lambs resuscitated with 100% and 21% O2 than with 5% O2 or N2. HR and PBF recovery in the 5% O2 group was delayed relative to all other oxygen SI groups. HR in 5%, 21% and 100% O2 groups reached 100 bpm before the SI was complete. HR and PBF in the N2 group did not increase until 10 s after the SI was completed and ventilation was initiated with air. CAP tended to increase quicker in all O2 groups than in N2 group. Oxygen content during an SI is important for circulatory recovery in asphyxiated lambs. This increase in HR is likely driven by the increase in PBF and venous return to the heart. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

PBF Reactor Building (PER620). In subpile room, camera faces southeast ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF Reactor Building (PER-620). In sub-pile room, camera faces southeast and looks up toward bottom of reactor vessel. Upper assembly in center of view is in-pile tube as it connects to vessel. Lower lateral constraints and rotating control cable are in position. Other connections have been bolted together. Note light bulbs for scale. Photographer: John Capek. Date: August 21, 1970. INEEL negative no. 70-3494 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

PBF Reactor Building (PER620) basement, inside cubicle 13. Lead bricks ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF Reactor Building (PER-620) basement, inside cubicle 13. Lead bricks shield the fission product detection system (FPDS). The system detected fission products in pressure loop from in-pile tube. shielding was to prevent other radiation in cubicle from interfering. Assembly of bricks in foreground will slide back to enclose and shield equipment in the three chambers. Date: 1982. INEEL negative no. 82-6376 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

PBF Reactor Building (PER620). Camera on main floor faces south ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF Reactor Building (PER-620). Camera on main floor faces south (open) doorway. In foreground is canal gate, lined with stainless steel and painted with protective coatings. Reactor pit is round with protective coatings. Reactor put is round form discernible beyond. Lifting beams and rigging are in place for a load test before reactor vessel arrives. Photographer: John Capek. Date: January 26, 1970. INEEL negative no. 70-347 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

The prevalence of obesity in children and young people with Down syndrome.

PubMed

O' Shea, Muireann; O' Shea, Carol; Gibson, Louise; Leo, Jennifer; Carty, Catherine

2018-05-15

Overweight and obesity is a growing concern among individuals with intellectual disabilities; however, little is known about the prevalence among children and youth with Down syndrome (CYDS). The purpose of this study was to determine the prevalence of overweight/obesity among CYDS in South West Ireland. This cross-sectional study measured height and weight of 61 CYDS aged 4-16 years. Body mass index (BMI) was calculated and percentage body fat (PBF) was measured using bio-electrical impendence analysis (BIA). Using the International Obesity Task Force BMI cut-offs, 51.6% of males and 40% of females were overweight/obese compared to 32% and 14.8%, respectively, using PBF. The mean PBF for males was 18.76 versus females 22.38 (p < .05). There is a higher prevalence of overweight/obesity, particularly in males, compared to the general population of children. The difference in estimation of overweight/obesity between BMI and BIA has implications for research and clinical practice. © 2018 John Wiley & Sons Ltd.

Correlation of adiposity indices with cardiovascular disease risk factors in healthy adults of Singapore: a cross-sectional study.

PubMed

Bi, Xinyan; Tey, Siew Ling; Leong, Claudia; Quek, Rina; Loo, Yi Ting; Henry, Christiani Jeyakumar

2016-01-01

Obesity has long been highlighted for its association with increased incidence of cardiovascular disease (CVD). Nonetheless, the best adiposity indices to evaluate the CVD risk factors remain contentious and few studies have been performed in Asian populations. In the present study, we compared the association strength of percent body fat (PBF) to indirect anthropometric measures of general adiposity (body mass index (BMI) and body adiposity index (BAI)) and central adiposity (waist circumference (WC), and waist-to-hip ratio (WHR)) for the prediction of CVD risk factors in healthy men and women living in Singapore. A total of 125 individuals (63 men and 62 women) took part in this study. PBF was measured by using three different techniques, including bioelectrical impedance analysis (BIA), BOD POD, and dual-energy X-ray absorptiometry (DEXA). Anthropometric measurements (WC, hip circumference (HC), height, and weight), fasting blood glucose (FBG), fasting serum insulin (FSI), and lipid profiles were determined according to standard protocols. Correlations of anthropometric measurements and PBF with CVD risk factors were compared. Irrespective of the measuring techniques, PBF showed strong positive correlations with FSI, HOMA-IR, TC/HDL, TG/HDL, and LDL/HDL in both genders. While PBF was highly correlated with FBG, SBP, and DBP in females, no significant relationships were observed in males. Amongst the five anthropometric measures of adiposity, BAI was the best predictor for CVD risk factors in female participants (r = 0.593 for HOMA-IR, r = 0.542 for TG/HDL, r = 0.474 for SBP, and r = 0.448 for DBP). For males, the combination of WC (r = 0.629 for HOMA-IR, and r = 0.446 for TG/HDL) and WHR (r = 0.352 for SBP, and r = 0.366 for DBP) had the best correlation with CVD risk factors. Measurement of PBF does not outperform the simple anthropometric measurements of obesity, i.e. BAI, WC, and WHR, in the prediction of CVD risk factors in healthy Asian adults. While measures of central adiposity (WC and WHR) tend to show stronger associations with CVD risk factors in males, measures of general adiposity (BAI) seems to be the best predictor in females. The gender differences in the association between adiposity indices and CVD risk factors may relate to different body fat distribution in males and females living in Singapore. These results may find further clinical utility to identify patients with CVD risk factors in a more efficient way.

Posttest calculation of the PBF LOC-11B and LOC-11C experiments using RELAP4/MOD6. [PWR

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hendrix, C.E.

Comparisons between RELAP4/MOD6, Update 4 code-calculated and measured experimental data are presented for the PBF LOC-11C and LOC-11B experiments. Independent code verification techniques are now being developed and this study represents a preliminary effort applying structured criteria for developing computer models, selecting code input, and performing base-run analyses. Where deficiencies are indicated in the base-case representation of the experiment, methods of code and criteria improvement are developed and appropriate recommendations are made.

PBF Reactor Building (PER620) under construction. Aerial view with camera ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF Reactor Building (PER-620) under construction. Aerial view with camera facing northeast. Steel framework is exposed for west wing and high bay. Concrete block siding on east wing. Railroad crane set up on west side. Note trenches proceeding from front of building. Left trench is for secondary coolant and will lead to Cooling Tower. Shorter trench will contain cables leading to control area. Photographer: Larry Page. Date: March 22, 1967. INEEL negative no. 67-5025 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

All-fiber gas sensor with intracavity photothermal spectroscopy.

PubMed

Zhao, Yan; Jin, Wei; Lin, Yuechuan; Yang, Fan; Ho, Hoi Lut

2018-04-01

We present an all-fiber intracavity photothermal (IC-PT) spectroscopic gas sensor with a hollow-core photonic bandgap fiber (HC-PBF) gas cell. The gas cell is placed inside a fiber-ring laser cavity to achieve higher laser light intensity in the hollow core and hence higher PT modulation signal. An experiment with a 0.62-m-long HC-PBF gas cell demonstrated a noise equivalent concentration of 176 ppb acetylene. Theoretical modeling shows that the IC-PT sensor has the potential of achieving sub-ppb (parts-per-billion) acetylene detection sensitivity.

Measuring and understanding the effects of a performance based financing scheme applied to nutrition services in Burundi-a mixed method impact evaluation design.

PubMed

Nimpagaritse, Manassé; Korachais, Catherine; Roberfroid, Dominique; Kolsteren, Patrick; Zine Eddine El Idrissi, Moulay Driss; Meessen, Bruno

2016-06-14

Malnutrition is a huge problem in Burundi. In order to improve the provision of services at hospital, health centre and community levels, the Ministry of Health is piloting the introduction of malnutrition prevention and care indicators within its performance based financing (PBF) scheme. Paying for units of services and for qualitative indicators is expected to enhance provision and quality of these nutrition services, as PBF has done, in Burundi and elsewhere, for several other services. This paper presents the protocol for the impact evaluation of the PBF scheme applied to malnutrition. The research design consists in a mixed methods model adopting a sequential explanatory design. The quantitative component is a cluster-randomized controlled evaluation design: among the 90 health centres selected for the study, half receive payment related to their results in malnutrition activities, while the other half get a budget allocation. Qualitative research will be carried out both during the intervention period and at the end of the quantitative evaluation. Data are collected from 1) baseline and follow-up surveys of 90 health centres and 6,480 households with children aged 6 to 23 months, 2) logbooks filled in weekly in health centres, and 3) in-depth interviews and focus group discussions. The evaluation aims to provide the best estimate of the impact of the project on malnutrition outcomes in the community as well as outputs at the health centre level (malnutrition care outputs) and to describe quantitatively and qualitatively the changes that took place (or did not take place) within health centres as a result of the program. Although PBF schemes are blooming in low in-come countries, there is still a need for evidence, especially on the impact of revising the list of remunerated indicators. It is expected that this impact evaluation will be helpful for the national policy dialogue in Burundi, but it will also provide key evidence for countries with an existing PBF scheme and confronted with malnutrition problems on the appropriateness to extend the strategy to nutrition services. ClinicalTrials.gov PRS Identifier: NCT02721160; registered March 2016.

Analysis of association of gene variants with obesity traits in New Zealand European children at 6 years of age.

PubMed

Krishnan, Mohanraj; Thompson, John M D; Mitchell, Edwin A; Murphy, Rinki; McCowan, Lesley M E; Shelling, Andrew N; On Behalf Of The Children Of Scope Study Group, G

2017-07-25

Childhood obesity is a public health problem, which is associated with a long-term increased risk of cardiovascular disease and premature mortality. Several gene variants have previously been identified that have provided novel insights into biological factors that contribute to the development of obesity. As obesity tracks through childhood into adulthood, identification of the genetic factors for obesity in early life is important. The objective of this study was to identify putative associations between genetic variants and obesity traits in children at 6 years of age. We recruited 1208 children of mothers from the New Zealand centre of the international Screening for Pregnancy Endpoints (SCOPE) study. Eighty common genetic variants associated with obesity traits were evaluated by the Sequenom assay. Body mass index standardised scores (BMI z-scores) and percentage body fat (PBF; measured by bio-impedance assay (BIA)) were used as anthropometric measures of obesity. A positive correlation was found between BMI z-scores and PBF (p < 0.001, r = 0.756). Two subsets of gene variants were associated with BMI z-scores (HOXB5-rs9299, SH2B1-rs7498665, NPC1-rs1805081 and MSRA-rs545854) and PBF (TMEM18-rs6548238, NPY-rs17149106, ETV-rs7647305, NPY-rs16139, TIMELESS-rs4630333, FTO-rs9939609, UCP2-rs659366, MAP2K5-rs2241423 and FAIM2-rs7138803) in the genotype models. However, there was an absence of overlapping association between any of the gene variants with BMI z-scores and PBF. A further five variants were associated with BMI z-scores (TMEM18-rs6548238, FTO-rs9939609 and MC4R-rs17782313) and PBF (SH2B1-rs7498665 and FTO-rs1421085) once separated by genetic models (additive, recessive and dominant) of inheritance. This study has identified significant associations between numerous gene variants selected on the basis of prior association with obesity and obesity traits in New Zealand European children.

Adiposity, fractional exhaled nitric oxide, and asthma in U.S. children.

PubMed

Han, Yueh-Ying; Forno, Erick; Celedón, Juan C

2014-07-01

Whether allergic airway inflammation mediates the association between overweight or obesity and childhood asthma is unknown. To examine adiposity, asthma, and fractional exhaled nitric oxide (FeNO) in U.S. children. Cross-sectional study of indicators of adiposity or obesity, FeNO (a biomarker of eosinophilic airway inflammation), and asthma in 2,681 children aged 6-17 years in the 2007-2010 National Health and Nutrition Examination Survey. Adiposity measures included body mass index (BMI), percent body fat (PBF), and waist circumference (WC). BMI, PBF, and WC were associated with asthma among children with low FeNO (odds ratio, 1.54-1.68; P < 0.01), but not among children with increased FeNO. Among children without asthma, BMI, PBF, and WC were associated with higher FEV1 and FVC, and lower FEV1/FVC. Among children with asthma and a high FeNO, all adiposity indicators were associated with decreased FEV1/FVC (β = -1.5% to -1.7% per z score) but not with FEV1 or FVC. Higher BMI or PBF was associated with worse asthma severity or control in children with asthma and increased FeNO, but not in children with asthma and low FeNO. Similar results were obtained in a secondary multivariate analysis of overweight or obesity (defined as BMI ≥85th percentile) and asthma or indicators of asthma severity or control, stratified by FeNO level. Adiposity indicators are associated with asthma in children with low FeNO. Among children with asthma, adiposity indicators are associated with worse asthma severity or control in those with high FeNO.

Variations in respiratory excretion of carbon dioxide can be used to calculate pulmonary blood flow.

PubMed

Preiss, David A; Azami, Takafumi; Urman, Richard D

2015-02-01

A non-invasive means of measuring pulmonary blood flow (PBF) would have numerous benefits in medicine. Traditionally, respiratory-based methods require breathing maneuvers, partial rebreathing, or foreign gas mixing because exhaled CO2 volume on a per-breath basis does not accurately represent alveolar exchange of CO2. We hypothesized that if the dilutional effect of the functional residual capacity was accounted for, the relationship between the calculated volume of CO2 removed per breath and the alveolar partial pressure of CO2 would be reversely linear. A computer model was developed that uses variable tidal breathing to calculate CO2 removal per breath at the level of the alveoli. We iterated estimates for functional residual capacity to create the best linear fit of alveolar CO2 pressure and CO2 elimination for 10 minutes of breathing and incorporated the volume of CO2 elimination into the Fick equation to calculate PBF. The relationship between alveolar pressure of CO2 and CO2 elimination produced an R(2) = 0.83. The optimal functional residual capacity differed from the "actual" capacity by 0.25 L (8.3%). The repeatability coefficient leveled at 0.09 at 10 breaths and the difference between the PBF calculated by the model and the preset blood flow was 0.62 ± 0.53 L/minute. With variations in tidal breathing, a linear relationship exists between alveolar CO2 pressure and CO2 elimination. Existing technology may be used to calculate CO2 elimination during quiet breathing and might therefore be used to accurately calculate PBF in humans with healthy lungs.

Long working hours and overweight and obesity in working adults.

PubMed

Kim, Byung-Mi; Lee, Bo-Eun; Park, Hye-Sook; Kim, Young-Ju; Suh, Young-Ju; Kim, Jeong-Youn; Shin, Ji-Young; Ha, Eun-Hee

2016-01-01

Previous studies have identified a link between gender and the various risk factors associated with obesity. We examined obesity risk factors in working adults to identify the effects of differences in body mass index (BMI) and percentage body fat (PBF) between women and men. A total of 1,120 adults agreed to participate in the study. Data from 711 participants, including 411 women and 300 men, were analyzed. Multiple logistic regression analysis was used to estimate the effects of risk factors on obesity and being overweight. In addition, the least-squares (LS) means of both BMI and PBF were estimated by analysis of covariance (ANCOVA) in a generalized linear model. Increases in BMI and PBF were significantly related to an age > 50 years and long working hours in women after compensating for confounding factors. Using the PBF criterion, the odds ratio (OR) of being overweight or obese in women > 50 years of age who worked for > 9 h a day was 3.9 (95% confidence interval [CI], 1.05-11.00). For BMI, women who were > 50 years of age and worked for > 9 h a day were 3.82 times (95% CI, 1.31-11.14) more likely to be overweight or obese than those who were < 50 years of age and worked for < 9 h a day. Obesity in working adults was associated with > 50 years of age and long working hours in women. Further studies are needed to investigate the underlying mechanisms of this relationship and its potential implications for the prevention and management of excess weight and obesity.

POWER-BURST FACILITY (PBF) CONCEPTUAL DESIGN

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wasserman, A.A.; Johnson, S.O.; Heffner, R.E.

1963-06-21

A description is presented of the conceptual design of a high- performance, pulsed reactor called the Power Burst Facility (PBF). This reactor is designed to generate power bursts with initial asymptotic periods as short as 1 msec, producing energy releases large enough to destroy entire fuel subassemblies placed in a capsule or flow loop mounted in the reactor, all without damage to the reactor itself. It will be used primarily to evaluate the consequences and hazards of very rapid destructive accidents in reactors representing the entire range of current nuclear technology as applied to power generation, propulsion, and testing. Itmore » will also be used to carry out detailed studies of nondestructive reactivity feedback mechanisms in the shortperiod domain. The facility was designed to be sufficiently flexible to accommodate future cores of even more advanced design. The design for the first reactor core is based upon proven technology; hence, completion of the final design of this core will involve no significant development delays. Construction of the PBF is proposed to begin in September 1984, and is expected to take approximately 20 months to complete. (auth)« less

PBF Reactor Building (PER620) basement. Workers wearing protective gear work ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF Reactor Building (PER-620) basement. Workers wearing protective gear work inside cubicle 13 on the fission product detection system. Man on left is atop shielded box shown in previous photo. Posture of second man illustrates waist-high height of shielding box. His hand rests on the access panel, which has been filled with lead bricks and which has been slid shut to enclose detection instruments within box. Photographer: John Capek. Date: January 24, 1983. INEEL negative no. 83-41-3-5 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

Adiposity, Fractional Exhaled Nitric Oxide, and Asthma in U.S. Children

PubMed Central

Han, Yueh-Ying; Forno, Erick

2014-01-01

Rationale: Whether allergic airway inflammation mediates the association between overweight or obesity and childhood asthma is unknown. Objectives: To examine adiposity, asthma, and fractional exhaled nitric oxide (FeNO) in U.S. children. Methods: Cross-sectional study of indicators of adiposity or obesity, FeNO (a biomarker of eosinophilic airway inflammation), and asthma in 2,681 children aged 6–17 years in the 2007–2010 National Health and Nutrition Examination Survey. Adiposity measures included body mass index (BMI), percent body fat (PBF), and waist circumference (WC). Measurements and Main Results: BMI, PBF, and WC were associated with asthma among children with low FeNO (odds ratio, 1.54–1.68; P < 0.01), but not among children with increased FeNO. Among children without asthma, BMI, PBF, and WC were associated with higher FEV1 and FVC, and lower FEV1/FVC. Among children with asthma and a high FeNO, all adiposity indicators were associated with decreased FEV1/FVC (β = −1.5% to −1.7% per z score) but not with FEV1 or FVC. Higher BMI or PBF was associated with worse asthma severity or control in children with asthma and increased FeNO, but not in children with asthma and low FeNO. Similar results were obtained in a secondary multivariate analysis of overweight or obesity (defined as BMI ≥85th percentile) and asthma or indicators of asthma severity or control, stratified by FeNO level. Conclusions: Adiposity indicators are associated with asthma in children with low FeNO. Among children with asthma, adiposity indicators are associated with worse asthma severity or control in those with high FeNO. PMID:24922361

How do performance-based financing programmes measure quality of care? A descriptive analysis of 68 quality checklists from 28 low- and middle-income countries

PubMed Central

Josephson, Erik; Gergen, Jessica; Coe, Martha; Ski, Samantha; Madhavan, Supriya; Bauhoff, Sebastian

2017-01-01

Abstract This paper seeks to systematically describe the length and content of quality checklists used in performance-based financing programmes, their similarities and differences, and how checklists have evolved over time. We compiled a list of supply-side, health facility-based performance-based financing (PBF) programmes in low- and lower middle-income countries based on a document review. We then solicited PBF manuals and quality checklists from implementers and donors of these PBF mechanisms. We entered each indicator from each quality checklist into a database verbatim in English, and translated into English from French where appropriate, and categorized each indicator according to the Donabedian framework and an author-derived categorization. We extracted 8,490 quality indicators from 68 quality checklists across 32 PBF implementations in 28 countries. On average, checklists contained 125 indicators; within the same program, checklists tend to grow as they are updated. Using the Donabedian framework, 80% of indicators were structure-type, 19% process-type, and less than 1% outcome-type. The author-derived categorization showed that 57% of indicators relate to availability of resources, 24% to managing the facility and 17% assess knowledge and effort. There is a high degree of similarity in a narrow set of indicators used in checklists for common service types such as maternal, neonatal and child health. We conclude that performance-based financing offers an appealing approach to targeting specific quality shortfalls and advancing toward the Sustainable Development Goals of high quality coverage. Currently most indicators focus on structural issues and resource availability. There is scope to rationalize and evolve the quality checklists of these programs to help achieve national and global goals to improve quality of care. PMID:28549142

A novel Streptomyces spp. integration vector derived from the S. venezuelae phage, SV1.

PubMed

Fayed, Bahgat; Younger, Ellen; Taylor, Gabrielle; Smith, Margaret C M

2014-05-30

Integrating vectors based on the int/attP loci of temperate phages are convenient and used widely, particularly for cloning genes in Streptomyces spp. We have constructed and tested a novel integrating vector based on g27, encoding integrase, and attP site from the phage, SV1. This plasmid, pBF3 integrates efficiently in S. coelicolor and S. lividans but surprisingly fails to generate stable integrants in S. venezuelae, the natural host for phage SV1. pBF3 promises to be a useful addition to the range of integrating vectors currently available for Streptomyces molecular genetics.

High temperature thermoplastic elastomers synthesized by living anionic polymerization in hydrocarbon solvent at room temperature

DOE PAGES

Schlegel, Ralf; Williams, Katherine; Voyloy, Dimitry; ...

2016-03-30

We present the synthesis and characterization of a new class of high temperature thermoplastic elastomers composed of polybenzofulvene–polyisoprene–polybenzofulvene (FIF) triblock copolymers. All copolymers were prepared by living anionic polymerization in benzene at room temperature. Homopolymerization and effects of additives on the glass transition temperature (T g) of polybenzofulvene (PBF) were also investigated. Among all triblock copolymers studied, FIF with 14 vol % of PBF exhibited a maximum stress of 14.3 ± 1.3 MPa and strain at break of 1390 ± 66% from tensile tests. The stress–strain curves of FIF-10 and 14 were analyzed by a statistical molecular approach using amore » nonaffine tube model to estimate the thermoplastic elastomer behavior. Dynamic mechanical analysis showed that the softening temperature of PBF in FIF was 145 °C, much higher than that of thermoplastic elastomers with polystyrene hard blocks. Microphase separation of FIF triblock copolymers was observed by small-angle X-ray scattering, even though long-range order was not achieved under the annealing conditions employed. Additionally, the microphase separation of the resulting triblock copolymers was examined by atomic force microscopy.« less

High temperature thermoplastic elastomers synthesized by living anionic polymerization in hydrocarbon solvent at room temperature

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schlegel, Ralf; Williams, Katherine; Voyloy, Dimitry

We present the synthesis and characterization of a new class of high temperature thermoplastic elastomers composed of polybenzofulvene–polyisoprene–polybenzofulvene (FIF) triblock copolymers. All copolymers were prepared by living anionic polymerization in benzene at room temperature. Homopolymerization and effects of additives on the glass transition temperature (T g) of polybenzofulvene (PBF) were also investigated. Among all triblock copolymers studied, FIF with 14 vol % of PBF exhibited a maximum stress of 14.3 ± 1.3 MPa and strain at break of 1390 ± 66% from tensile tests. The stress–strain curves of FIF-10 and 14 were analyzed by a statistical molecular approach using amore » nonaffine tube model to estimate the thermoplastic elastomer behavior. Dynamic mechanical analysis showed that the softening temperature of PBF in FIF was 145 °C, much higher than that of thermoplastic elastomers with polystyrene hard blocks. Microphase separation of FIF triblock copolymers was observed by small-angle X-ray scattering, even though long-range order was not achieved under the annealing conditions employed. Additionally, the microphase separation of the resulting triblock copolymers was examined by atomic force microscopy.« less

Effect of furosemide on pulmonary blood flow distribution in resting and exercising horses

NASA Technical Reports Server (NTRS)

Erickson, H. H.; Bernard, S. L.; Glenny, R. W.; Fedde, M. R.; Polissar, N. L.; Basaraba, R. J.; Walther, S. M.; Gaughan, E. M.; McMurphy, R.; Hlastala, M. P.

1999-01-01

We determined the spatial distribution of pulmonary blood flow (PBF) with 15-micron fluorescent-labeled microspheres during rest and exercise in five Thoroughbred horses before and 4 h after furosemide administration (0.5 mg/kg iv). The primary finding of this study was that PBF redistribution occurred from rest to exercise, both with and without furosemide. However, there was less blood flow to the dorsal portion of the lung during exercise postfurosemide compared with prefurosemide. Furosemide did alter the resting perfusion distribution by increasing the flow to the ventral regions of the lung; however, that increase in flow was abated with exercise. Other findings included 1) unchanged gas exchange and cardiac output during rest and exercise after vs. before furosemide, 2) a decrease in pulmonary arterial pressure after furosemide, 3) an increase in the slope of the relationship of PBF vs. vertical height up the lung during exercise, both with and without furosemide, and 4) a decrease in blood flow to the dorsal region of the lung at rest after furosemide. Pulmonary perfusion variability within the lung may be a function of the anatomy of the pulmonary vessels that results in a predominantly fixed spatial pattern of flow distribution.

Distributed gas sensing with optical fibre photothermal interferometry.

PubMed

Lin, Yuechuan; Liu, Fei; He, Xiangge; Jin, Wei; Zhang, Min; Yang, Fan; Ho, Hoi Lut; Tan, Yanzhen; Gu, Lijuan

2017-12-11

We report the first distributed optical fibre trace-gas detection system based on photothermal interferometry (PTI) in a hollow-core photonic bandgap fibre (HC-PBF). Absorption of a modulated pump propagating in the gas-filled HC-PBF generates distributed phase modulation along the fibre, which is detected by a dual-pulse heterodyne phase-sensitive optical time-domain reflectometry (OTDR) system. Quasi-distributed sensing experiment with two 28-meter-long HC-PBF sensing sections connected by single-mode transmission fibres demonstrated a limit of detection (LOD) of ∼10 ppb acetylene with a pump power level of 55 mW and an effective noise bandwidth (ENBW) of 0.01 Hz, corresponding to a normalized detection limit of 5.5ppb⋅W/Hz. Distributed sensing experiment over a 200-meter-long sensing cable made of serially connected HC-PBFs demonstrated a LOD of ∼ 5 ppm with 62.5 mW peak pump power and 11.8 Hz ENBW, or a normalized detection limit of 312ppb⋅W/Hz. The spatial resolution of the current distributed detection system is limited to ∼ 30 m, but it is possible to reduce down to 1 meter or smaller by optimizing the phase detection system.

Impact of Performance-Based Financing in a Low-Resource Setting: A Decade of Experience in Cambodia.

PubMed

Van de Poel, Ellen; Flores, Gabriela; Ir, Por; O'Donnell, Owen

2016-06-01

This paper exploits the geographic expansion of performance-based financing (PBF) in Cambodia over a decade to estimate its effect on the utilization of maternal and child health services. PBF is estimated to raise the proportion of births occurring in incentivized public health facilities by 7.5 percentage points (25%). A substantial part of this effect arises from switching the location of institutional births from private to public facilities; there is no significant impact on deliveries supervised by a skilled birth attendant, nor is there any significant effect on neonatal mortality, antenatal care and vaccination rates. The impact on births in public facilities is much greater if PBF is accompanied by maternity vouchers that cover user fees, but there is no significant effect among the poorest women. Heterogeneous effects across schemes differing in design suggest that maintaining management authority within a health district while giving explicit service targets to facilities is more effective in raising utilization than contracting management to a non-governmental organization while denying it full autonomy and leaving financial penalties vague. Copyright © 2015 John Wiley & Sons, Ltd. Copyright © 2015 John Wiley & Sons, Ltd.

Experimental and Theoretical Studies of the Pure Rotational Spectra of Lead Halides: PbF and PbCl

NASA Astrophysics Data System (ADS)

Norman, Spencer; Dawes, Richard; Grubbs, G. S., II; Cooke, S. A.; Long, B. E.; Dewberry, Chris

2014-06-01

The pure rotational spectrum of lead monochloride, PbCl, has been measured and analyzed using chirped pulse and cavity Fourier transform microwave (CP-FTMW and FTMW) spectrometers equipped with an ablation source. Refined parameters of an effective Hamiltonian including fine and hyperfine interactions similar to those previously reported by Fink et al. [1] were determined. Dynamically-weighted, explicitly-correlated MRCI-F12 calculations [2] were performed for both PbF and the valence isoelectronic PbCl to predict potential energy curves (PEC). Spin-orbit coupling was included in the calculations, which is known to split the X12Π1/2 and X22Π3/2 components of the ground electronic state by roughly 8280 wn in both lead halide systems. Calculated rotational levels were obtained using the PECs and compared with experiment including previously published results for PbF [3]. References: 1- K. Ziebarth, K. D. Setzer, O. Shestakov,1 and E. H. Fink, J. Mol. Spec. 191, 108 (1998). 2- B. J. Barker et al. J. Chem. Phys. 137, 214313 (2012). 3- R. J. Mawhorter et al. Phys. Rev. A 84, 022508 (2011).

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stan, Camelia V.; Dutta, Rajkrishna; White, Claire E.

Lead fluoride, PbF 2, was investigated experimentally in the laser-heated diamond anvil cell by x-ray diffraction to pressures of 75 GPa at room temperature and to 64.5 GPa and 2430 K, as well as through first-principles density functional theory calculations up to 70 GPa. During room temperature compression, no discontinuous changes in the x-ray diffraction pattern or volume were observed, but the lattice parameters displayed highly anomalous trends between 10-22 GPa with enhanced compressibility along the a direction and reduced or even negative compressibility along b and c. Theoretical calculations of valence electron densities at 22 GPa showed that α-PbFmore » 2 underwent a pressure-induced isosymmetric phase transition to a postcotunnite Co 2Si structure and also revealed the detailed atomic rearrangements associated with the development of an extra Pb-F bond in the high-pressure phase. Our x-ray results and theoretical calculations are consistent with an isosymmetric phase transition smoothly occurring over 10-22 GPa rather than abruptly as previously suggested. The characteristic values for the cell constants a/c and (a+c)/b, which are used to distinguish among cotunnite-, Co 2Si-, and Ni 2In-type phases, require modification based on our results. An equation of state fit yields a bulk modulus, K 0, of 72(3) GPa for the cotunnite-type, and an ambient-pressure volume, V 0, of 182(2)Å 3, and K 0=81(4)GPa for the Co 2Si-type phase when fixing the pressure derivative of the bulk modulus, K 0'=4. Upon heating above 1200 K at pressures at or above 25.9 GPa, PbF 2 partially transformed to the hexagonal Ni 2In-type phase but wholly or partially reverted back to Co 2Si-type phase upon temperature quench. From 43-65 GPa, nearly complete transformation to the Ni 2In-type PbF 2 was observed at high temperature, but the material partially transformed back to the orthorhombic phase upon temperature quench. Our results show that high-pressure behavior of PbF 2 is distinct from that of the alkaline earth fluorides with similar ionic radii. These results also have relevance to understanding the behavior of lanthanide and actinide dioxides, which have been predicted theoretically to exhibit similar isosymmetric transitions at Mbar pressures.« less

Slowing and cooling of heavy or light (even with a tiny electric dipole moment) polar molecules using a novel, versatile electrostatic Stark decelerator.

PubMed

Wang, Qin; Hou, Shunyong; Xu, Liang; Yin, Jianping

2016-02-21

To meet some demands for realizing precise measurements of an electric dipole moment of electron (eEDM) and examining cold collisions or cold chemical physics, we have proposed a novel, versatile electrostatic Stark decelerator with an array of true 3D electric potential wells, which are created by a series of horizontally-oriented, U-shaped electrodes with time-sequence controlling high voltages (± HV) and two guiding electrodes with a constant voltage. We have calculated the 2D electric field distribution, the Stark shifts of the four lowest rotational sub-levels of PbF molecules in the X1(2)Π1/2(v = 0) electronic and vibrational ground states as well as the population in the different rotational levels. We have discussed the 2D longitudinal and transverse phase-space acceptances of PbF molecules in our decelerator. Subsequently, we have simulated the dynamic processes of the decelerated PbF molecules using the 3D Monte-Carlo method, and have found that a supersonic PbF beam with a velocity of 300 m s(-1) can be efficiently slowed to about 5 m s(-1), which will greatly enhance the sensitivities to research a parity violation and measure an eEDM. In addition, we have investigated the dependences of the longitudinal velocity spread, longitudinal temperature and bunching efficiency on both the number of guiding stages and high voltages, and found that after bunching, a cold packet of PbF molecules in the J = 7/2, MΩ = -7/4 state with a longitudinal velocity spread of 0.69 m s(-1) (corresponding to a longitudinal temperature of 2.35 mK) will be produced by our high-efficient decelerator, which will generate a high energy-resolution molecular beam for studying cold collision physics. Finally, our novel decelerator can also be used to efficiently slow NO molecules with a tiny electric dipole moment (EDM) of 0.16 D from 315 m s(-1) to 28 m s(-1). It is clear that our proposed new decelerator has a good slowing performance and experimental feasibility as well as wide applications in the field of precise measurements and cold molecule physics.

High-pressure polymorphism of Pb F 2 to 75 GPa

DOE PAGES

Stan, Camelia V.; Dutta, Rajkrishna; White, Claire E.; ...

2016-07-06

Lead fluoride, PbF 2, was investigated experimentally in the laser-heated diamond anvil cell by x-ray diffraction to pressures of 75 GPa at room temperature and to 64.5 GPa and 2430 K, as well as through first-principles density functional theory calculations up to 70 GPa. During room temperature compression, no discontinuous changes in the x-ray diffraction pattern or volume were observed, but the lattice parameters displayed highly anomalous trends between 10-22 GPa with enhanced compressibility along the a direction and reduced or even negative compressibility along b and c. Theoretical calculations of valence electron densities at 22 GPa showed that α-PbFmore » 2 underwent a pressure-induced isosymmetric phase transition to a postcotunnite Co 2Si structure and also revealed the detailed atomic rearrangements associated with the development of an extra Pb-F bond in the high-pressure phase. Our x-ray results and theoretical calculations are consistent with an isosymmetric phase transition smoothly occurring over 10-22 GPa rather than abruptly as previously suggested. The characteristic values for the cell constants a/c and (a+c)/b, which are used to distinguish among cotunnite-, Co 2Si-, and Ni 2In-type phases, require modification based on our results. An equation of state fit yields a bulk modulus, K 0, of 72(3) GPa for the cotunnite-type, and an ambient-pressure volume, V 0, of 182(2)Å 3, and K 0=81(4)GPa for the Co 2Si-type phase when fixing the pressure derivative of the bulk modulus, K 0'=4. Upon heating above 1200 K at pressures at or above 25.9 GPa, PbF 2 partially transformed to the hexagonal Ni 2In-type phase but wholly or partially reverted back to Co 2Si-type phase upon temperature quench. From 43-65 GPa, nearly complete transformation to the Ni 2In-type PbF 2 was observed at high temperature, but the material partially transformed back to the orthorhombic phase upon temperature quench. Our results show that high-pressure behavior of PbF 2 is distinct from that of the alkaline earth fluorides with similar ionic radii. These results also have relevance to understanding the behavior of lanthanide and actinide dioxides, which have been predicted theoretically to exhibit similar isosymmetric transitions at Mbar pressures.« less

Development of magnetic resonance technology for noninvasive boron quantification

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bradshaw, K.M.

1990-11-01

Boron magnetic resonance imaging (MRI) and spectroscopy (MRS) were developed in support of the noninvasive boron quantification task of the Idaho National Engineering Laboratory (INEL) Power Burst Facility/Boron Neutron Capture Therapy (PBF/BNCT) program. The hardware and software described in this report are modifications specific to a GE Signa{trademark} MRI system, release 3.X and are necessary for boron magnetic resonance operation. The technology developed in this task has been applied to obtaining animal pharmacokinetic data of boron compounds (drug time response) and the in-vivo localization of boron in animal tissue noninvasively. 9 refs., 21 figs.

The structural properties of PbF2 by molecular dynamics

NASA Astrophysics Data System (ADS)

Chergui, Y.; Nehaoua, N.; Telghemti, B.; Guemid, S.; Deraddji, N. E.; Belkhir, H.; Mekki, D. E.

2010-08-01

This work presents the use of molecular dynamics (MD) and the code of Dl_Poly, in order to study the structure of fluoride glass after melting and quenching. We are realized the processing phase liquid-phase, simulating rapid quenching at different speeds to see the effect of quenching rate on the operation of the devitrification. This technique of simulation has become a powerful tool for investigating the microscopic behaviour of matter as well as for calculating macroscopic observable quantities. As basic results, we calculated the interatomic distance, angles and statistics, which help us to know the geometric form and the structure of PbF2. These results are in experimental agreement to those reported in literature.

PBF (PER620) interior of Reactor Room. Camera facing south from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF (PER-620) interior of Reactor Room. Camera facing south from stairway platform in southwest corner (similar to platform in view at left). Reactor was beneath water in circular tank. Fuel was stored in the canal north of it. Platform and apparatus at right is reactor bridge with control rod mechanisms and actuators. The entire apparatus swung over the reactor and pool during operations. Personnel in view are involved with decontamination and preparation of facility for demolition. Note rails near ceiling for crane; motor for rollup door at upper center of view. Date: March 2004. INEEL negative no. HD-41-3-2 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

Pathways to high and low performance: factors differentiating primary care facilities under performance-based financing in Nigeria

PubMed Central

Mabuchi, Shunsuke; Sesan, Temilade; Bennett, Sara C

2018-01-01

Abstract The determinants of primary health facility performance in developing countries have not been well studied. One of the most under-researched areas is health facility management. This study investigated health facilities under the pilot performance-based financing (PBF) scheme in Nigeria, and aimed to understand which factors differentiated primary health care centres (PHCCs) which had performed well, vs those which had not, with a focus on health facility management practices. We used a multiple case study where we compared two high-performing PHCCs and two low-performing PHCCs for each of the two PBF target states. Two teams of two trained local researchers spent 1 week at each PHCC and collected semi-structured interview, observation and documentary data. Data from interviews were transcribed, translated and coded using a framework approach. The data for each PHCC were synthesized to understand dynamic interactions of different elements in each case. We then compared the characteristics of high and low performers. The areas in which critical differences between high and low-performers emerged were: community engagement and support; and performance and staff management. We also found that (i) contextual and health system factors particularly staffing, access and competition with other providers; (ii) health centre management including community engagement, performance management and staff management; and (iii) community leader support interacted and drove performance improvement among the PHCCs. Among them, we found that good health centre management can overcome some contextual and health system barriers and enhance community leader support. This study findings suggest a strong need to select capable and motivated health centre managers, provide long-term coaching in managerial skills, and motivate them to improve their practices. The study also highlights the need to position engagement with community leaders as a key management practice and a central element of interventions to improve PHCC performance. PMID:29077844

Suppression of pulmonary vasculature in lung perfusion MRI using correlation analysis.

PubMed

Risse, Frank; Kuder, Tristan A; Kauczor, Hans-Ulrich; Semmler, Wolfhard; Fink, Christian

2009-11-01

The purpose of the study was to evaluate the feasibility of suppressing the pulmonary vasculature in lung perfusion MRI using cross-correlation analysis (CCA). Perfusion magnetic resonance imaging (MRI) (3D FLASH, TR/TE/flip angle: 0.8 ms/2.1 ms/40 degrees ) of the lungs was performed in seven healthy volunteers at 1.5 Tesla after injection of Gd-DTPA. CCA was performed pixel-wise in lung segmentations using the signal time-course of the main pulmonary artery and left atrium as references. Pixels with high correlation coefficients were considered as arterial or venous and excluded from further analysis. Quantitative perfusion parameters [pulmonary blood flow (PBF) and volume (PBV)] were calculated for manual lung segmentations separately, with the entire left and right lung with all intrapulmonary vessels (IPV) included, excluded manually or excluded using CCA. The application of CCA allowed reliable suppression of hilar and large IPVs. Using vascular suppression by CCA, perfusion parameters were significantly reduced (p

Gaussian process-based surrogate modeling framework for process planning in laser powder-bed fusion additive manufacturing of 316L stainless steel

DOE PAGES

Tapia, Gustavo; Khairallah, Saad A.; Matthews, Manyalibo J.; ...

2017-09-22

Here, Laser Powder-Bed Fusion (L-PBF) metal-based additive manufacturing (AM) is complex and not fully understood. Successful processing for one material, might not necessarily apply to a different material. This paper describes a workflow process that aims at creating a material data sheet standard that describes regimes where the process can be expected to be robust. The procedure consists of building a Gaussian process-based surrogate model of the L-PBF process that predicts melt pool depth in single-track experiments given a laser power, scan speed, and laser beam size combination. The predictions are then mapped onto a power versus scan speed diagrammore » delimiting the conduction from the keyhole melting controlled regimes. This statistical framework is shown to be robust even for cases where experimental training data might be suboptimal in quality, if appropriate physics-based filters are applied. Additionally, it is demonstrated that a high-fidelity simulation model of L-PBF can equally be successfully used for building a surrogate model, which is beneficial since simulations are getting more efficient and are more practical to study the response of different materials, than to re-tool an AM machine for new material powder.« less

Gaussian process-based surrogate modeling framework for process planning in laser powder-bed fusion additive manufacturing of 316L stainless steel

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tapia, Gustavo; Khairallah, Saad A.; Matthews, Manyalibo J.

Here, Laser Powder-Bed Fusion (L-PBF) metal-based additive manufacturing (AM) is complex and not fully understood. Successful processing for one material, might not necessarily apply to a different material. This paper describes a workflow process that aims at creating a material data sheet standard that describes regimes where the process can be expected to be robust. The procedure consists of building a Gaussian process-based surrogate model of the L-PBF process that predicts melt pool depth in single-track experiments given a laser power, scan speed, and laser beam size combination. The predictions are then mapped onto a power versus scan speed diagrammore » delimiting the conduction from the keyhole melting controlled regimes. This statistical framework is shown to be robust even for cases where experimental training data might be suboptimal in quality, if appropriate physics-based filters are applied. Additionally, it is demonstrated that a high-fidelity simulation model of L-PBF can equally be successfully used for building a surrogate model, which is beneficial since simulations are getting more efficient and are more practical to study the response of different materials, than to re-tool an AM machine for new material powder.« less

The structure of Er3+-doped oxy-fluoride transparent glass-ceramics studied by Raman scattering

NASA Astrophysics Data System (ADS)

Tikhomirov, V. K.; Seddon, A. B.; Ferrari, M.; Montagna, M.; Santos, L. F.; Almeida, R. M.

2003-11-01

We show that the structure of transparent oxy-fluoride glass-ceramics formed by heat treatment of glasses of typical composition 32(SiO2):9(AlO1.5):31.5(CdF2):18.5(PbF2): 5.5(ZnF2):3.5(ErF3) mol% consists of ~ 12 nm diameter, Er3+-doped, β-PbF2 nano-crystals embedded in a silica-based glass network and connected to it via non-bridging O and F anions, or fluorine linkages such as Pb-F-Cd and Pb-F-Zn. It is proposed that the glass network structure is mostly chain-like and dominated by Si(O,F)4 tetrahedra with two bridging O and two non-bridging O and/or F atoms (Q2 units). SiO4 tetrahedra with zero and one bridging O (Q0 and Q1 units, respectively) are also present in the glass structure, in the approximate proportion Q0:Q1:Q2 = 1:1:3, a characteristic which appears to be of primary importance. The flexible, chain-like glass-network, with many broken bonds, results in easy accommodation of the Er3+-doped PbF2 nano-crystals, which are grown by heat-treatment of the precursor glass. The boson peak in the Raman spectrum of the precursor glass decreases in intensity upon ceramming and is partly converted to narrow crystalline peaks at lower frequency, consistent with the precipitation of PbF2 crystalline nano-particles. It is suggested that the boson peak involves localized vibrations of broken or stretched Pb-F bonds. The mean free path for these vibrations increases with ceramming, which involves partial crystallization of the glass network, resulting in a shift of the boson peak vibrations to lower-frequency crystalline peaks.

Increasing maternal percentage body fat in early second trimester: a risk factor for preeclampsia.

PubMed

Wang, Yanxia; Qiu, Jie; Zhou, Min; Wang, Youjie; Du, Yukai

2015-02-01

To determine if maternal percentage body fat (PBF) or fat free mass (FFM) in the early second trimester of pregnancy influenced the development of preeclampsia. A matched nested case-control study was conducted from a cohort study of 1668 women at Gansu provincial maternal and child care hospital from July 2007 to August 2011 in China. Maternal PBF and FFM were assessed by bioelectrical impedance analysis during 12th-16th gestational week. The demographic characteristics were all chart abstracted. After childbirth, 70 cases of preeclampsia were matched by race/age with 140 uncomplicated pregnancies women. Multivariate logistic regression analysis was performed to determine the associated risk factors. Pre-pregnancy body mass index were higher in women who subsequently developed preeclampsia compared with controls (p < 0.001). During 12th-16th gestational week, there were nearly 7-fold increase in the odds of preeclampsia (adjusted OR: 6.84, 95% CI: 4.15-41.60) among women with PBF ≥ 40% versus women with PBF < 40%. But FFM were not at further increased risk of the development of preeclampsia (adjusted OR, 1.02; 95% CI, 0.6-3.6). Maternal PBF but not FFM is a predictor of preeclampsia in the early second trimester. Excessive adipose tissue possibly played an important role in developing of preeclampsia.

Effect of lead fluoride incorporation on the structure and luminescence properties of tungsten sodium phosphate glasses

NASA Astrophysics Data System (ADS)

Nardi, Rachel Prado Russo Delorenzo; Braz, Celso Eduardo; de Camargo, Andrea S. S.; Ribeiro, Sidney J. L.; Rocha, Lucas A.; Cassanjes, Fábia Castro; Poirier, Gael

2015-11-01

Tungsten phosphate glasses are known to be promising materials for several applications in optics such as non linear optical properties, lower phonon energy or photochromic effects related with tungsten oxide incorporation inside the phosphate network. In this study, lead fluoride has been incorporated in a 60NaPO3-40WO3 glass composition according to the ternary molar compositions (100 - x)[0.6NaPO3-0.4WO3]-xPbF2 with x varying from 0 to 60 mol%. The structural changes as a function of composition were investigated by thermal analysis, UV-visible absorption, Raman spectroscopy, X-ray diffraction of the crystallized samples, and Eu3+ emission in the visible. While DSC analyzes points out a strong decrease in the glass network connectivity and higher crystallization tendency with increasing PbF2 contents, Raman spectra clearly identify a progressive incorporation of PbF2 in the phosphate network with the formation of terminal Psbnd F and Wsbnd F bonds. These results are also in agreement with the crystallization of β-PbF2 observed for the most lead fluoride concentrated samples. Investigation of Eu3+ emission data in the visible showed longer 5D0 excited state lifetime values and higher quantum efficiencies. These results are discussed in terms of the assumption of higher local symmetry around Eu3+ with increasing PbF2 contents.

HABIT CHANGES OF Y3Al5O12 AND Y3Ga5O12 GROWN FROM A PbO-PbF2 FLUX,

DTIC Science & Technology

Al2O3 or - Ga2O3 ratio in the melt. Y3Ga5O12 crystals have a pure (211) habit when grown from either a Y2O3- or PbO-rich melt. The crystals develop...small (110) faces when grown from a Ga2O3 - or PbF2-rich melt. Y3Al5O12 crystals have a pure (110) when grown from either a PbF2- or Al2O3-rich melt... Ga2O3 -rich melts. It is believed that the habit variations are caused by changes in either the surface diffusion or step propagation, due to Pb

Thermal and refining processes, not fermentation, tend to reduce lipotropic capacity of plant-based foods.

PubMed

Fardet, Anthony; Martin, Jean-François; Chardigny, Jean-Michel

2011-08-01

Plant-based foods (PBF) are relevant and diversified sources of lipotropes, which are compounds preventing excess hepatic fat deposits. In a first study, we defined the lipotropic capacity (LC, %) of raw PBF as the means of 8 lipotrope densities (LD, mg/100 kcal), each expressed relative to that of a reference food ranking the highest considering its mean 8 LD ranks (LC(raw asparagus)=100%) (A. Fardet, J.-F. Martin and J. M. Chardigny, J. Food Comp. Anal., 2011, DOI: 10.1016/j.jfca.2011.1003.1013). We showed that vegetables appeared as the best source of lipotropes on a 100 kcal-basis compared to legumes, cereals, fruits and nuts. The main objective of this second study was to quantify the effect of processing on LD and LC of raw PBF based on lipotrope contents collected in a USDA (United State Department of Agriculture) database and the literature, i.e. betaine, choline, myo-inositol, methionine, magnesium, niacin, pantothenic acid and folate contents. Choline and betaine densities were not significantly affected by processing while methionine and lipotropic micronutrient densities were significantly decreased, especially for magnesium, pantothenate and folates. Myo-inositol density decreases were insignificant due to lower product number resulting from limited literature data. Lipotropic micronutrient densities were more affected by processing than other densities. Fermentations increased betaine (median change of +32%) and choline (+34%) densities. Canning and boiling vegetables increased choline densities (+26%). Globally, processing significantly reduced LC by ∼20%, fermentations being less drastic (median change of -5%) than refining (-33%) and thermal treatments (-16%). More specifically, canning increased LC of beetroot (536 vs 390%) and common bean (40 vs 36%) as fermentation towards LC grape (14 vs 7% for wine). Results were then mainly discussed based on percentages of lipotrope content changes on a dry-weight basis. Results of this study also showed that the LC is quite a relevant index to estimate effect of processing on lipotropic potential of PBF. This journal is © The Royal Society of Chemistry 2011

Phase sensitivity of fundamental mode to external atmospheric pressure for hollow-core photonic bandgap fiber

NASA Astrophysics Data System (ADS)

Xu, Xiaobin; Liu, Yangqian; Gao, Fuyu; Song, Ningfang

2018-07-01

Hollow-core photonic bandgap fibers (HC-PBFs) are suitable for spaceborne fiber optical gyroscopes owing to their excellent environmental adaptability. However, hundreds of small holes full of air at one atmosphere of pressure can make the HC-PBF sensitive to external atmospheric pressure. In this study, we investigated the phase sensitivity of the fundamental mode to external atmospheric pressure for the HC-PBF, and the experimental result indicates that the phase sensitivity is approximately 1.6 × 10-5 ppm/Pa, which is mostly contributed by the change in the pressure-induced length. Through the choice of coating, the phase sensitivity to external atmospheric pressure can be reduced by about a factor of five compared to current HC-PBFs, and the excellent temperature performance can be maintained at the same time.

Residual stress measurements via neutron diffraction of additive manufactured stainless steel 17-4 PH.

PubMed

Masoomi, Mohammad; Shamsaei, Nima; Winholtz, Robert A; Milner, Justin L; Gnäupel-Herold, Thomas; Elwany, Alaa; Mahmoudi, Mohamad; Thompson, Scott M

2017-08-01

Neutron diffraction was employed to measure internal residual stresses at various locations along stainless steel (SS) 17-4 PH specimens additively manufactured via laser-powder bed fusion (L-PBF). Of these specimens, two were rods (diameter=8 mm, length=80 mm) built vertically upward and one a parallelepiped (8×80×9 mm 3 ) built with its longest edge parallel to ground. One rod and the parallelepiped were left in their as-built condition, while the other rod was heat treated. Data presented provide insight into the microstructural characteristics of typical L-PBF SS 17-4 PH specimens and their dependence on build orientation and post-processing procedures such as heat treatment. Data have been deposited in the Data in Brief Dataverse repository (doi:10.7910/DVN/T41S3V).

Quantitative lung perfusion evaluation using Fourier decomposition perfusion MRI.

PubMed

Kjørstad, Åsmund; Corteville, Dominique M R; Fischer, Andre; Henzler, Thomas; Schmid-Bindert, Gerald; Zöllner, Frank G; Schad, Lothar R

2014-08-01

To quantitatively evaluate lung perfusion using Fourier decomposition perfusion MRI. The Fourier decomposition (FD) method is a noninvasive method for assessing ventilation- and perfusion-related information in the lungs, where the perfusion maps in particular have shown promise for clinical use. However, the perfusion maps are nonquantitative and dimensionless, making follow-ups and direct comparisons between patients difficult. We present an approach to obtain physically meaningful and quantifiable perfusion maps using the FD method. The standard FD perfusion images are quantified by comparing the partially blood-filled pixels in the lung parenchyma with the fully blood-filled pixels in the aorta. The percentage of blood in a pixel is then combined with the temporal information, yielding quantitative blood flow values. The values of 10 healthy volunteers are compared with SEEPAGE measurements which have shown high consistency with dynamic contrast enhanced-MRI. All pulmonary blood flow (PBF) values are within the expected range. The two methods are in good agreement (mean difference = 0.2 mL/min/100 mL, mean absolute difference = 11 mL/min/100 mL, mean PBF-FD = 150 mL/min/100 mL, mean PBF-SEEPAGE = 151 mL/min/100 mL). The Bland-Altman plot shows a good spread of values, indicating no systematic bias between the methods. Quantitative lung perfusion can be obtained using the Fourier Decomposition method combined with a small amount of postprocessing. Copyright © 2013 Wiley Periodicals, Inc.

Measurement and validation of measures for impulsive food choice across obese and healthy-weight individuals.

PubMed

Hendrickson, Kelsie L; Rasmussen, Erin B; Lawyer, Steven R

2015-07-01

The present study established a brief measure of delay discounting for food, the Food Choice Questionnaire (FCQ), and compared it to another more established measure of food discounting that uses the adjusting amount (AA) procedure. One hundred forty-four undergraduate participants completed either two measures of hypothetical food discounting (a computerized food AA procedure or the FCQ) or two measures of hypothetical money discounting [a computerized monetary AA procedure or the Monetary Choice questionnaire (MCQ)]. The money condition was used as a replication of previous work. Results indicated that the FCQ yielded consistent data that strongly correlated with the AA food discounting task. Moreover, a magnitude effect was found with the FCQ, such that smaller amounts of food were discounted more steeply than larger amounts. In addition, individuals with higher percent body fat (PBF) discounted food more steeply than individuals with lower PBF. The MCQ, which also produced a magnitude effect, and the monetary adjusting amount procedure yielded data that were orderly, consistent, and correlated strongly with one another, replicating previous literature. This study is the first to show that a novel measure of food discounting (the FCQ) yields consistent data strongly correlated with an established measure of food discounting and is sensitive to PBF. Moreover, the FCQ is easier and quicker to administer than the AA procedure, which may interest researchers who use discounting tasks in food-related research. Copyright © 2015 Elsevier Ltd. All rights reserved.

The Effective Hamiltonian for the Ground State of 207Pb19F and New Measurements of the Fine Structure Spectrum Near 1.2 μ m.

NASA Astrophysics Data System (ADS)

Mawhorter, Richard; Murphey, Benjamin; Baum, Alexander; Sears, Trevor J.; Yang, T. Zh.; Rupasinghe, P. M.; McRaven, C. P.; Shafer-Ray, N. E.; Alphei, Lukas D.; Grabow, Jens-Uwe.

2011-06-01

We have measured rotational transitions in the ground, X_1 ^2Π1/2, electronic state of naturally occuring isotopomers of PbF in a supersonic free jet Fourier transform microwave spectrometer. The data for 207Pb19F is particularly interesting because it is a candidate for a future experimental e-EDM measurement. To fit the data for this species to the measurement precision, the nuclear spin-spin dipolar interaction and a second term that can be equivalently viewed as a centrifugal distortion correction to the familiar Frosch and Foley hyperfine coupling terms, or an Ω- dependent correction to the nuclear spin-rotational coupling are required, in addition to the standard terms. To characterize the higher X_2 ^2Π3/2 component of the ground state of PbF, we are attempting a direct measurement of transitions between the two components in a slit jet-cooled sample using a frequency comb-referenced extended cavity diode laser. This spectrum was originally detected in a hot source by Fourier transform near-infrared spectroscopy, but low-J transitions were unresolved at that time. Acknowledgments: Work at Brookhaven National Laboratory was carried out under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy. Work by N. E. Shafer-Ray was performed with support from the National Science Foundatation award NSF-0855431. J.-U. Grabow ackonwledges funding from the Deutsche Forschungsgemeinschaft and the Land Niedersachsen. K. Ziebarth, K. Setzer, O. Shestakov and E. Fink J. Molec. Spectrosc. 191, 108 1998.

Structure and up-conversion luminescence in sol-gel derived Er 3+-Yb 3+ co-doped SiO 2:PbF 2 nano-glass-ceramics

NASA Astrophysics Data System (ADS)

del-Castillo, J.; Yanes, A. C.; Méndez-Ramos, J.; Tikhomirov, V. K.; Rodríguez, V. D.

2009-11-01

Transparent oxyfluoride nano-glass-ceramics 90(SiO 2)10(PbF 2) co-doped with 0.3 Yb 3+ and 0.1 Er 3+ (mol%) have been prepared by thermal treatment of precursor sol-gel glasses. X-ray diffraction and high resolution transmission electron microscopy analysis pointed out a precipitation of cubic β-PbF 2 nanocrystals of certain diameter in nano-glass-ceramics varying from 10 to 20 nm depending on heat treatment conditions. The incorporation of Yb 3+ and Er 3+ dopants in these nanocrystals has been confirmed by signatures of luminescence spectroscopy. Up-conversion luminescence pumped at 980 nm has been detected. Colour tuneability of up-conversion luminescence varying pump power has been analyzed in terms of standard chromaticity diagram. This tuneability opens applications for up-conversion phosphors and three-dimensional optical recording.

An analysis of estimation of pulmonary blood flow by the single-breath method

NASA Technical Reports Server (NTRS)

Srinivasan, R.

1986-01-01

The single-breath method represents a simple noninvasive technique for the assessment of capillary blood flow across the lung. However, this method has not gained widespread acceptance, because its accuracy is still being questioned. A rigorous procedure is described for estimating pulmonary blood flow (PBF) using data obtained with the aid of the single-breath method. Attention is given to the minimization of data-processing errors in the presence of measurement errors and to questions regarding a correction for possible loss of CO2 in the lung tissue. It is pointed out that the estimations are based on the exact solution of the underlying differential equations which describe the dynamics of gas exchange in the lung. The reported study demonstrates the feasibility of obtaining highly reliable estimates of PBF from expiratory data in the presence of random measurement errors.

Emergency braking is affected by the use of cruise control.

PubMed

Jammes, Yves; Behr, Michel; Llari, Maxime; Bonicel, Sarah; Weber, Jean Paul; Berdah, Stephane

2017-08-18

We compared the differences in the braking response to vehicle collision between an active human emergency braking (control condition) and cruise control (CC) or adaptive cruise control (ACC). In 11 male subjects, age 22 to 67 years, we measured the active emergency braking response during manual driving using the accelerator pedal (control condition) or in condition mimicking CC or ACC. In both conditions, we measured the brake reaction time (BRT), delay to produce the peak braking force (PBD), total emergency braking response (BRT + PBD), and peak braking force (PBF). Electromyograms of leg and thigh muscles were recorded during braking. The tonic vibratory response (TVR), Hoffman reflex (HR), and M-waves were recorded in leg muscles to explore the change in sensorimotor control. No difference in PBF, TVR amplitude, HR latency, and H max /M max ratio were found between the control and CC/ACC conditions. On the other hand, BRT and PBD were significantly lengthened in the CC/ACC condition (240 ± 13 ms and 704 ± 70 ms, respectively) compared to control (183 ± 7 ms and 568 ± 36 ms, respectively). BRT increased with the age of participants and the driving experience shortened PBD and increased PBF. In male subjects, driving in a CC/ACC condition significantly delays the active emergency braking response to vehicle collision. This could result from higher amplitude of leg motion in the CC/ACC condition and/or by the age-related changes in motor control. Car and truck drivers must take account of the significant increase in the braking distance in a CC/ACC condition.

Simple anthropometrics are more correlated with health variables than are estimates of body composition in Yup'ik people.

PubMed

Bray, Maria; Pomeroy, Jeremy; Knowler, William C; Bersamin, Andrea; Hopkins, Scarlett; Brage, Søren; Stanhope, Kimber; Havel, Peter J; Boyer, Bert B

2013-09-01

To (1) evaluate the relationships between several indices of obesity with obesity-related risk factors; (2) compare the accuracy of body composition estimates derived from anthropometry and bioimpedance analysis (BIA) to estimates of body composition assessed by doubly-labeled water (DLW); and (3) establish equations for estimating fat mass (FM), fat-free mass (FFM), and percent body fat (PBF) in Yup'ik people. Participants included 1,056 adult Yup'ik people from 11 communities in Southwestern Alaska. In a sub-study of 30 participants, we developed population-specific linear regression models for estimating FM, FFM, and PBF from anthropometrics, age, sex, and BIA against criterion measures derived from total body water assessed with DLW. These models were then used with the population cohort and we analyzed the relationships between obesity indices and several health-related and disease status variables: (1) fasting plasma lipids, (2) glucose, (3) HbA1c, (4) adiponectin, (5) blood pressure, (6) diabetes (DM), and (7) cerebrocoronary vascular disease (CCVD) which includes stroke and heart disease. The best model for estimating FM in the sub-study used only three variables-sex, waist circumference (WC), and hip circumference and had multiple R(2) = 0.9730. FFM and PBF were calculated from FM and body weight. WC and other anthropometrics were more highly correlated with a number of obesity-related risk factors than were direct estimates of body composition. Body composition in Yup'ik people can be accurately estimated from simple anthropometrics. Copyright © 2012 The Obesity Society.

Simple Anthropometrics Are More Correlated with Health Variables than Are Estimates of Body Composition in Yup’ik People

PubMed Central

Bray, Maria; Pomeroy, Jeremy; Knowler, William C.; Bersamin, Andrea; Hopkins, Scarlett; Brage, Søren; Stanhope, Kimber; Havel, Peter J.; Boyer, Bert B.

2012-01-01

We aimed to: 1) evaluate the relationships between several indices of obesity with obesity-related risk factors; 2) compare the accuracy of body composition estimates derived from anthropometry and bioimpedance analysis (BIA) to estimates of body composition assessed by doubly-labeled water (DLW); and 3) establish equations for estimating fat mass (FM), fat-free mass (FFM), and percent body fat (PBF) in Yup’ik Eskimo people. Participants included 1056 adult Yup’ik People from 11 communities in Southwestern Alaska. In a substudy of 30 participants, we developed population-specific linear regression models for estimating FM, FFM, and PBF from anthropometrics, age, sex, and BIA against criterion measures derived from total body water assessed with DLW. These models were then used with the population cohort and we analyzed the relationships between obesity indices and several health-related and disease status variables: 1. fasting plasma lipids, 2. glucose, 3. HbA1c, 4. adiponectin, 5. blood pressure, 6) diabetes (DM), and 7) cerebrocoronary vascular disease (CCVD) which includes stroke and heart disease. The best model for estimating FM in the substudy used only three variables – sex, waist circumference (WC), and hip circumference and had multiple R2=0.9730. FFM and PBF were calculated from FM and body weight. WC and other anthropometrics were more highly correlated with a number of obesity-related risk factors than were direct estimates of body composition. We conclude that body composition in Yup’ik People can be accurately estimated from simple anthropometrics. PMID:23666898

Technological developments for strontium-90 determination using AMS

NASA Astrophysics Data System (ADS)

Satou, Yukihiko; Sueki, Keisuke; Sasa, Kimikazu; Matsunaka, Tetsuya; Takahashi, Tsutomu; Shibayama, Nao; Izumi, Daiki; Kinoshita, Norikazu; Matsuzaki, Hiroyuki

2015-10-01

Accelerator mass spectrometry (AMS) is one of method used for 90Sr determination. It would enable rapid 90Sr measurements from environmental samples such as water, soil, and milk. However, routine analysis of 90Sr using AMS has not yet been achieved because of difficulties associated with isobaric separation and production of intense negative ion beams characterized by currents from hundreds of nanoamperes to several microamperes. We have developed a rapid procedure for preparing samples with optimum compositions for use with AMS, which enables production of intense Sr beam currents from an ion source. Samples of SrF2 were prepared from a standard Sr solution and agricultural soil. The time required to prepare a SrF2 sample from a soil sample was 10 h. Negative 88SrF3- ions were successfully extracted at 500 nA from mixed samples of SrF2 and PbF2. In the present work, negative ions of 90Zr, included as an impurity, were accelerated with a tandem accelerator operated at a terminal voltage of 5 MV. Ions characterized by a charge state of 6+ were channeled into a gas counter. An atomic ratio of 90Zr/88Sr of 3 × 10-8 was estimated for the soil sample. No signal was detected from the assay of PbF2, which was pressed in an aluminum cathode, for a mass number of 90. PbF2 revealed good performance in the production of negative SrF3- molecular ion beams and detection of 90Sr with a gas counter.

Multi-scale Microstructure Characterization for Improved Understanding of Microstructure-Property Relationship in Additive Manufacturing

NASA Astrophysics Data System (ADS)

Song, Hye Yun

Additive manufacturing (AM) is the process for making 3-D objects by adding materials layer by layer. It can result in a marked reduction of the time and cost associated with designing and producing highly complex parts. Over the past decade, significant progress has been made in machine hardware and control software for process development to achieve dimensional accuracy and mitigate defects. On the other hand, the knowledge on microstructure-property relationship in the additively manufactured builds is still being established. In additive manufacturing, the interactions between the heat source and the material lead to a series of physical phenomena including localized heating, melting, solidification and micro-segregation, and cooling. Far-from-equilibrium microstructure can form as the material experiences a large number of repeated, rapid heating and cooling cycles (i.e. temperature gyrations) during depositions. The mechanical properties of additively manufactured parts are significantly influenced by their final microstructure. The overarching goal of the present research is to improve the fundamental understanding of microstructure-property relationship for AM parts. Specially, it is investigated the high-temperature creep strength of InconelRTM 718 (abbreviated as IN718 thereafter) fabricated by laser-powder bed fusion (L-PBF) AM. The specific objectives include (1) effect of support on the local microstructure, (2) microstructure evolution during post-built heat treatment, and (3) creep strength. Detailed microstructure characterization is performed using a multitude of tools including micro-hardness mapping, scanning electron microscope (SEM) along with electron backscatter diffraction (EBSD), and transmission electron microscope (TEM) for selected area diffraction (SAD) analysis and energy-dispersive X-ray spectroscopy (EDS). The characterized microstructure is correlated to the mechanical properties. Highlights of the research findings are discussed in the following. A support is a "temporary" structure typically built in-situ with the primary part to provide the structural support to the mass of overhanging features; it is subsequently removed after fabrication. During the building process, the existence of such support can affect the local heat flow from the build to the substrate, which in turn may influence the local microstructure. The first objective of this research is to develop a fundamental understanding of the effect of the support on the microstructure fabricated by L-PBF AM. Two groups of as-built samples, with support and without support, are studied. SEM along with EBSD is used to analyze the microstructure characteristics including the growth of the microstructures, the fraction of different microstructure and the misorientation among the microstructure grains. At the nano-scale resolution, TEM is used to identify the precipitate phases. In addition, the micro-hardness values are also measured for samples built with and without support. As a precipitation-strengthened alloy, the heat treatment is critical for IN718, since the desired mechanical properties, such as high-temperature tensile and creep strength, are only acquired by the formation of the strengthening precipitates, namely gamma' prime and gamma''. Currently, the industrial standards for the heat treatment of IN718 are developed for cast and wrought cases and not specifically for AM builds. Thus, it is essential to evaluate the effect of the heat treatment on the formation of the strengthening precipitates in IN718 builds fabricated by L-PBF AM, which is the focus of the second objective. Particularly, a modification to the industry standard heat treatment is developed to maximize the fraction of the strengthening precipitates in the IN718 builds. The microstructural characterizations are performed for several modified heat treatment cases including a homogenization step, solution annealing step and aging step. The micro-hardness values are measured for as-built conditions and several heat-treated conditions including the modified homogenization, solution anneal and aging steps. Finally, the oxidation behavior during the heat treatment is also discussed and compared to that for a piece of actual cast. The third objective of the present study is the evaluation of the mechanical properties of heat-treated IN718 builds produced by L-PBF AM. Particularly, creep test are performed to quantify the mechanical properties of the heat-treated IN718 builds. The creep samples are heat-treated using the following condition: homogenization at 1100 °C for 2 hours followed by air cooling (AC), and aging at 760 °C for 10 hours also followed by AC. For the creep test, the samples are loaded at a constant stress (690 MPa or 100 ksi) at 649 °C (1200 °F) in accordance to Aerospace Material Standards (AMS) 5663. The creep rate of the heat-treated AM sample is compared with the literature data for wrought cases. The relationship of creep strength to the characteristic of the microstructures in the heat-treated IN718 builds is discussed. In summary, the research results provide insights into the microstructure-creep-strength relationship for IN718 fabricated by additive manufacturing. Particularly, a modified post-built heat treatment is developed to maximize the formation of strengthening precipitates and achieve large grains in IN718, resulting in a markedly higher creep strength when compared to the literature data for wrought cases. Taken as a whole, the new knowledge generated in this dissertation is essential to ensure the performance of additively manufactured parts in structural applications.

Catching Fire: An Analysis of Maine's Combined Heat and Power Energy Incentive Policies

NASA Astrophysics Data System (ADS)

Laufer, Joshua A.

This study qualitatively reviews and analyzes Maine's state-level incentive policies and regulations to catalyze the development of renewably fueled Combined Heat and Power (CHP) facilities by utilizing a framework developed by Janet Sawin. The results of the analysis indicate that additional opportunities exist to promote additional renewable CHP plant development through both strengthening existing state policies and passing new legislation. Maine's Renewable Portfolio Standard and Production-Based Incentive pilot program could be expanded in scope and in their level of support for renewable CHP. New policies could be enacted to further accelerate renewable CHP development in the state, such as a Production Tax Credit (PTC) and the creation of a grant program for level 2 feasibility studies within the existing Public Benefits Fund (PBF), Efficiency Maine Trust.

Preliminary Investigation of Keyhole Phenomena during Single Layer Fabrication in Laser Additive Manufacturing of Stainless Steel

NASA Astrophysics Data System (ADS)

Matilainen, Ville-Pekka; Piili, Heidi; Salminen, Antti; Nyrhilä, Olli

Laser additive manufacturing (LAM) is a fabrication technology that enables production of complex parts from metallic materials with mechanical properties comparable to conventionally manufactured parts. In the LAM process, parts are manufactured by melting metallic powder layer-by-layer with a laser beam. This manufacturing technology is nowadays called powder bed fusion (PBF) according to the ASTM F2792-12a standard. This strategy involves several different independent and dependent thermal cycles, all of which have an influence on the final properties of the manufactured part. The quality of PBF parts depends strongly on the characteristics of each single laser-melted track and each single layer. This study consequently concentrates on investigating the effects of process parameters such as laser power on single track and layer formation and laser-material interaction phenomena occurring during the PBF process. Experimental tests were done with two different machines: a modified research machine based on an EOS EOSINT M-series system and an EOS EOSINT M280 system. The material used was EOS stainless steel 17-4 PH. Process monitoring was done with an active illuminated high speed camera system. After microscopy analysis, it was concluded that a keyhole can form during laser additive manufacturing of stainless steel. It was noted that heat input has an important effect on the likelihood of keyhole formation. The threshold intensity value for keyhole formation of 106 W/cm2 was exceeded in all manufactured single tracks. Laser interaction time was found to have an effect on penetration depth and keyhole formation, since the penetration depth increased with increased laser interaction time. It was also concluded that active illuminated high speed camera systems are suitable for monitoring of the manufacturing process and facilitate process control.

In vivo assessment of bone healing following Piezotome® ultrasonic instrumentation.

PubMed

Reside, Jonathan; Everett, Eric; Padilla, Ricardo; Arce, Roger; Miguez, Patricia; Brodala, Nadine; De Kok, Ingeborg; Nares, Salvador

2015-04-01

This pilot study evaluated the molecular, histologic, and radiographic healing of bone to instrumentation with piezoelectric or high speed rotary (R) devices over a 3-week healing period. Fourteen Sprague-Dawley rats (Charles River Laboratories International, Inc., Wilmington, MA, USA) underwent bilateral tibial osteotomies prepared in a randomized split-leg design using Piezotome® (P1) (Satelec Acteon, Merignac, France), Piezotome 2® (P2) (Satelec Acteon), High-speed R instrumentation, or sham surgery (S). At 1 week, an osteogenesis array was used to evaluate differences in gene expression while quantitative analysis assessed percentage bone fill (PBF) and bone mineral density (BMD) in the defect, peripheral, and distant regions at 3 weeks. Qualitative histologic evaluation of healing osteotomies was also performed at 3 weeks. At 1 week, expression of 11 and 18 genes involved in bone healing was significantly (p < .05) lower following P1 and P2 instrumentation, respectively, relative to S whereas 16 and 4 genes were lower relative to R. No differences in PBF or BMD were detected between groups within the osteotomy defect. However, significant differences in PBF (p = .020) and BMD (p = .008) were noted along the peripheral region between P2 and R groups, being R the group with the lowest values. Histologically, smooth osteotomy margins were present following instrumentation using P1 or P2 relative to R. Piezoelectric instrumentation favors preservation of bone adjacent to osteotomies while variations in gene expression suggest differences in healing rates due to surgical modality. Bone instrumented by piezoelectric surgery appears less detrimental to bone healing than high-speed R device. © 2013 Wiley Periodicals, Inc.

Effect of early exclusive breastfeeding on morbidity among infants born to HIV-negative mothers in Zimbabwe.

PubMed

Koyanagi, Ai; Humphrey, Jean H; Moulton, Lawrence H; Ntozini, Robert; Mutasa, Kuda; Iliff, Peter; Black, Robert E

2009-05-01

Early exclusive breastfeeding (EBF) is recommended by the World Health Organization, but EBF rates remain low throughout the world. For infants born to breastfeeding HIV-positive mothers, early EBF is associated with a lower risk of postnatal transmission than is feeding breast milk together with other liquids or foods. No studies conducted in Africa have reported any benefits of EBF for infants born to HIV-negative women. The objective was to compare the rate of sick clinic visits by infants aged 43-182 d according to breastfeeding exclusivity [EBF, predominant breastfeeding (PBF), and mixed breastfeeding (MBF)]. We compared rates of all-cause clinic visits and clinic visits related to diarrhea and lower respiratory tract infection (LRTI) among a cohort of 9207 infants of HIV-negative mothers during 2 age intervals: 43-91 and 92-182 d according to exclusivity of breastfeeding. Breastfeeding exclusivity was defined in 2 ways ("ever since birth" and "previous 7 d") and was assessed at 43 and 91 d. EBF between birth and 3 mo was significantly protective against diarrhea between 3 and 6 mo of age with the "ever since birth" definition [incidence rate ratios (IRRs) of 8.83 (95% CI: 1.07, 65.53) and 8.76 (95% CI: 1.13, 68.09) for PBF and MBF, respectively] and with the "previous 7 d" definition [2.04 (95% CI: 1.11, 3.77) and 2.05 (95% CI: 1.13, 3.72) for PBF and MBF, respectively]. The adverse effect of MBF on LRTI visits was weaker, reaching borderline significance only by the "ever since birth" definition during the 43-91-d interval (IRR: 1.91; 95% CI: 0.99, 3.67). Early EBF is associated with a significant reduction in sick clinic visits, especially those due to diarrhea.

Data reconstruction can improve abundance index estimation: An example using Taiwanese longline data for Pacific bluefin tuna

PubMed Central

Fukuda, Hiromu; Maunder, Mark N.

2017-01-01

Catch-per-unit-effort (CPUE) is often the main piece of information used in fisheries stock assessment; however, the catch and effort data that are traditionally compiled from commercial logbooks can be incomplete or unreliable due to many reasons. Pacific bluefin tuna (PBF) is a seasonal target species in the Taiwanese longline fishery. Since 2010, detailed catch information for each PBF has been made available through a catch documentation scheme. However, previously, only market landing data with a low coverage of logbooks were available. Therefore, several nontraditional procedures were performed to reconstruct catch and effort data from many alternative data sources not directly obtained from fishers for 2001–2015: (1) Estimating the catch number from the landing weight for 2001–2003, for which the catch number information was incomplete, based on Monte Carlo simulation; (2) deriving fishing days for 2007–2009 from voyage data recorder data, based on a newly developed algorithm; and (3) deriving fishing days for 2001–2006 from vessel trip information, based on linear relationships between fishing and at-sea days. Subsequently, generalized linear mixed models were developed with the delta-lognormal assumption for standardizing the CPUE calculated from the reconstructed data, and three-stage model evaluation was performed using (1) Akaike and Bayesian information criteria to determine the most favorable variable composition of standardization models, (2) overall R2 via cross-validation to compare fitting performance between area-separated and area-combined standardizations, and (3) system-based testing to explore the consistency of the standardized CPUEs with auxiliary data in the PBF stock assessment model. The last stage of evaluation revealed high consistency among the data, thus demonstrating improvements in data reconstruction for estimating the abundance index, and consequently the stock assessment. PMID:28968434

Which index best correlates with body fat mass: BAI, BMI, waist or WHR?

PubMed

Suchanek, Pavel; Kralova Lesna, Ivana; Mengerova, Olga; Mrazkova, Jolana; Lanska, Vera; Stavek, Petr

2012-01-01

The body mass index (BMI) has been the most commonly applied clinical measure to characterise body composition in individuals. However, the BMI has been criticised as being an inaccurate measure of body fatness. Recently, a new index reflecting body composition, the Body Adiposity Index (BAI) was proposed. The BAI was calculated using the equation BAI=((hip circumference)/ ((height)1.5) - 18). The aim of this study was to compare estimates of body fat content, i.e., body adiposity index (BAI), BMI, waist-hip ratio (WHR) and waist and hip circumferences, with respect to their ability to predict the percentage of body fat (PBF). To select an optimal surrogate for adiposity, we examined the correlation between body adiposity percentage as measured by BIA and several variables, including BAI, BMI and WHR. Correlations ranged from a high of 0.78 for BMI, 0.67 for BAI and 0.66 for waist circumference to a low value of 0.39 for the WHR index. The correlation between PBF and BAI (R=0.67, R2=0.45, p<0.001) and the correlation between PBF and BMI (R=0.78, R2=0.60, p<0.001) were of similar magnitude. Based on our results and those of other studies, we can say that the BAI index is not a universally valid index that could be used in the place of the BMI index in a Caucasian population; indeed, it would not accurately reflect body fat mass and thus could lead to an increased risk of obesity. Further, WHR index is not a suitable for an estimation of body fat.

Prenatal Stress, Methylation in Inflammation-Related Genes, and Adiposity Measures in Early Childhood: the Programming Research in Obesity, Growth Environment and Social Stress Cohort Study.

PubMed

Wu, Shaowei; Gennings, Chris; Wright, Rosalind J; Wilson, Ander; Burris, Heather H; Just, Allan C; Braun, Joseph M; Svensson, Katherine; Zhong, Jia; Brennan, Kasey J M; Dereix, Alexandra; Cantoral, Alejandra; Schnaas, Lourdes; Téllez-Rojo, Martha Maria; Wright, Robert O; Baccarelli, Andrea A

2018-01-01

Maternal stress during pregnancy may influence childhood growth and adiposity, possibly through immune/inflammatory programming. We investigated whether exposure to prenatal stress and methylation in inflammation-related genes were associated with childhood adiposity in 424 mother-child pairs in Mexico City, Mexico. A stress index was created based on four prenatally administered stress-related scales (Exposure to Violence, Crisis in Family Systems, State-Trait Anxiety Inventory, and Edinburgh Postnatal Depression Scale). We measured weight, height, body fat mass (BFM), percentage body fat (PBF), and waist circumference in early childhood (age range, 4-6 years). Body mass index (BMI) z scores were calculated according to World Health Organization standards. DNA methylation in gene promoters of tumor necrosis factor α, interleukin 8, and interleukin 6 (IL6) in umbilical cord blood were determined by pyrosequencing. An interquartile range increase in stress index (27.3) was associated with decreases of 0.14 unit in BMI z score (95% confidence interval [CI] = -0.28 to -0.005), 5.6% in BFM (95% CI = -9.7 to -1.4), 3.5% in PBF (95% CI = -6.3 to -0.5), and 1.2% in waist circumference (95% CI = -2.4 to -0.04) in multivariable-adjusted models. An interquartile range increase in IL6 methylation (3.9%) was associated with increases of 0.23 unit in BMI z score (95% CI = 0.06-0.40), 8.1% (95% CI = 2.3-14.3) in BFM, 5.5% (95% CI = 1.7-9.5) in PBF, and 1.7% (95% CI = 0.2-3.3) in waist circumference. Prenatal stress was associated with decreased childhood adiposity, whereas cord blood IL6 methylation was associated with increased childhood adiposity in Mexican children.

Central and regional hemodynamics in prolonged space flights

NASA Astrophysics Data System (ADS)

Gazenko, O. G.; Shulzhenko, E. B.; Turchaninova, V. F.; Egorov, A. D.

This paper presents the results of measuring central and regional (head, forearm, calf) hemodynamics at rest and during provocative tests by the method of tetrapolar rheography in the course of Salyut-6-Soyuz and Salyut-7-Soyuz missions. The measurements were carried out during short-term (19 man-flights of 7 days in duration) and long-term (21 man-flights of 65-237 days in duration) manned missions. At rest, stroke volume (SV) and cardiac output (CO) as well as heart rate (HR) decreased insignificantly (in short-term flights) or remained essentially unchanged (in long-term flights). In prolonged flights CO increased significantly in response to exercise tests due to an increase in HR and the lack of changes in SV. After exercise tests SV and CO decreased as compared to the preflight level. During lower body negative pressure (LBNP) tests HR and CO were slightly higher than preflight. Changes in regional hemodynamics included a distinct decrease of pulse blood filling (PBF) of the calf, a reduction of the tone of large vessels of the calf and small vessels of the forearm. Head examination (in the region of the internal carotid artery) showed a decrease of PBF of the left hemisphere (during flight months 2-8) and a distinct decline of the tone of small vessels, mainly, in the right hemisphere. During LBNP tests the tone of pre- and postcapillary vessels of the brain returned to normal while PBF of the right and left hemisphere vessels declined. It has been shown that regional circulation variations depend on the area examined and are induced by a rearrangement of total hemodynamics of the human body in microgravity. This paper reviews the data concerning changes in central and regional circulation of men in space flights of different duration.

In Situ 3D Monitoring of Geometric Signatures in the Powder-Bed-Fusion Additive Manufacturing Process via Vision Sensing Methods.

PubMed

Li, Zhongwei; Liu, Xingjian; Wen, Shifeng; He, Piyao; Zhong, Kai; Wei, Qingsong; Shi, Yusheng; Liu, Sheng

2018-04-12

Lack of monitoring of the in situ process signatures is one of the challenges that has been restricting the improvement of Powder-Bed-Fusion Additive Manufacturing (PBF AM). Among various process signatures.

Effect of Laser Powder Bed Fusion Parameters on the Microstructure and Texture Development in Superelastic Ti-18Zr-14Nb Alloy

NASA Astrophysics Data System (ADS)

Kreitcberg, A.; Brailovski, V.; Sheremetyev, V.; Prokoshkin, S.

2017-12-01

The effect of different laser powder bed fusion (L-PBF) parameters on the phase composition, microstructure, and crystallographic texture of Ti-18Zr-14Nb alloy was studied. Two levels of laser power, scanning speed, and hatching space were used, while the layer thickness was kept constant. The resulting volume energy density was ranged from 20 to 60 J/mm3, and the build rate, from 12 to 36 cm3/h. The manufactured coupons were analyzed by X-ray diffractometry, transmission, and scanning electron microscopy. It was found that the greater influence observed on the microstructure and texture development was caused by the value of laser power, while the lowest, by that of hatching space. Based on the results obtained, the processing optimization strategy aimed at improving the density, superelastic, and fatigue properties of the L-PBF manufactured Ti-18Zr-14Nb alloy was proposed.

Soil health improvement in an organic orchard production system in Northwest Missouri

USDA-ARS?s Scientific Manuscript database

Prairie Birthday Farm (PBF), a diversified, organic enterprise on the loess hill landscape in northwestern Missouri, was previously managed as a conventional corn-soybean production system. Transition to organic farming began in 1995 and included soil organic matter restoration with native prairie e...

Performance-Based Funding in Public Schools.

ERIC Educational Resources Information Center

Foster, Charles A.; Marquart, Deanna J.

This report examines three performance-based funding (PBF) plans: (1) merit pay for teachers and/or administrators; (2) career ladders; and (3) formula-driven incentive payments to schools. The report contends that present-day problems in public schools result largely from the organizational structure of the educational enterprise. Being based on…

Ecologically-based management improves soil health in an organic orchard production system

USDA-ARS?s Scientific Manuscript database

Prairie Birthday Farm (PBF), a diversified, organic enterprise on the loess hill landscape in northwestern Missouri, was previously managed as a conventional corn-soybean production system. The soil (Sharpsburg silt loam; fine, montmorillonitic, mesic Typic Argiudolls) is mapped as an ‘eroded soil p...

Computer-Based Feedback and Goal Intervention: Learning Effects

ERIC Educational Resources Information Center

Valdez, Alfred

2012-01-01

This study investigated how a goal intervention influences the learning effects gained from feedback when acquiring concepts and rules pertaining to the topic of descriptive statistics. Three feedback conditions; knowledge of correct response feedback (KCRF), principle-based feedback (PBF), and no-feedback (NF), were crossed with two goal…

76 FR 36103 - Combined Notice of Filings #1

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-21

...-2077-005. Applicants: Delaware City Refining Company LLC, PBF Power Marketing LLC. Desciption: Delaware City Refining Company LLC, Triennial Market Power Analysis and Notice of Change in Status. Filed Date..., 2011. Docket Numbers: ER10-2074-001; ER10-2097-003. Applicants: Kansas City Power & Light Company, KCP...

75 FR 50746 - Endangered and Threatened Species; Take of Anadromous Fish

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-17

... and Threatened Species; Take of Anadromous Fish AGENCY: National Marine Fisheries Service (NMFS.... 1531 et seq.) and regulations governing listed fish and wildlife permits (50 CFR Parts 222-226). NMFS... is to evaluate factors limiting fish distribution and water quality in streams owned by PBF. The...

Performance-Based Funding: State Policy Influences on Small Rural Community Colleges

ERIC Educational Resources Information Center

Thornton, Zoë Mercedes; Friedel, Janice Nahra

2016-01-01

Performance-based funding (PBF) models intend to increase efficiency and productivity of the institution, thereby influencing organizational change. This change may be structural, programmatic, or procedural, and it may affect institutional practice and/or policy. The purpose of this qualitative case study was to understand the organizational…

Structural, morphological and optical investigations on electron-beam irradiated PbF2-TeO2-B2O3-Eu2O3 glasses

NASA Astrophysics Data System (ADS)

Wagh, Akshatha; Petwal, Vikash; Dwivedi, Jishnu; Upadhyaya, V.; Raviprakash, Y.; Kamath, Sudha D.

2016-09-01

Combined structural, optical and morphological studies were carried out on Eu2O3 doped PbF2-TeO2-B2O3 glass samples, before and after being subjected to electron beam of energy 7.5 MeV. XRD confirmed the amorphous nature of the glasses even after 150 kGy electron beam irradiation. Densities of the irradiated samples showed slightly greater values when compared to their respective values before irradiation, which proved the increase in the compaction of the network. The intensities of the three prominent bands; B-O-B linkages, BO4 units and BO3 units of FT-IR spectra, of the titled glasses, showed slight decrease after electron beam irradiation. The decrement in the values of energy band gap and shift in cut-off wavelength towards red edge, proved the formation of color centers in the glass network after irradiation. The change in Hunter L values, through color measurement was a proof for the Farbe/color/absorption centers created in the glass sites after irradiation.

Nd3+-doped TeO2-PbF2-AlF3 glasses for laser applications

NASA Astrophysics Data System (ADS)

Lalla, E. A.; Rodríguez-Mendoza, U. R.; Lozano-Gorrín, A. D.; Sanz-Arranz, A.; Rull, F.; Lavín, V.

2016-01-01

A study of the optical properties of Nd3+ ion in TeO2-PbF2-AlF3 glasses has been carried out for different Nd3+ concentrations. Based on the Judd-Ofelt theory, intensity parameters and radiative properties were determined from the absorption spectra. Focusing on the suitability of this host for laser applications, the spectroscopic quality factor χ was obtained with a value of 1.07, a value of the order of other compositions proposed as laser hosts. For the most intense emission corresponding with the 4F3/2 → 4I11/2 transition (1.06 μm), the absorption and emission and have been calculated with values of 1.20 × 10-20 cm2, 2.08 × 10-20 cm2. A positive value for the gain cross-sections has been found for a population inversion factor γ of 0.4 in the spectral range from 1060 to 1110 nm. All these results suggest the potentially use of this system as a laser host.

Emphysema on Thoracic CT and Exercise Ventilatory Inefficiency in Mild-to-Moderate COPD.

PubMed

Jones, Joshua H; Zelt, Joel T; Hirai, Daniel M; Diniz, Camilla V; Zaza, Aida; O'Donnell, Denis E; Neder, J Alberto

2017-04-01

There is growing evidence that emphysema on thoracic computed tomography (CT) is associated with poor exercise tolerance in COPD patients with only mild-to-moderate airflow obstruction. We hypothesized that an excessive ventilatory response to exercise (ventilatory inefficiency) would underlie these abnormalities. In a prospective study, 19 patients (FEV 1 = 82 ± 13%, 12 Global Initiative for Chronic Obstructive Lung Disease (GOLD) stage 1) and 26 controls underwent an incremental exercise test. Ventilatory inefficiency was assessed by the ventilation ([Formula: see text]E)/CO 2 output ([Formula: see text]CO 2 ) nadir. Pulmonary blood flow (PBF) in a submaximal test was calculated by inert gas rebreathing. Emphysema was quantified as % of attenuation areas below 950 HU. Patients typically presented with centrilobular emphysema (76.8 ± 10.1% of total emphysema) in the upper lobes (upper/total lung ratio = 0.82 ± 0.04). They had lower peak oxygen uptake ([Formula: see text]O 2 ), higher [Formula: see text]E/[Formula: see text]CO 2 nadir, and greater dyspnea scores than controls (p < 0.05). Lower peak [Formula: see text]O 2 and worse dyspnea were found in patients with higher [Formula: see text]E/[Formula: see text]CO 2 nadirs (≥30). Patients had blunted increases in PBF from rest to iso-[Formula: see text]O 2 exercise (p < 0.05). Higher [Formula: see text]E/[Formula: see text]CO 2 nadir in COPD was associated with emphysema severity (r = 0.63) which, in turn, was related to reduced lung diffusing capacity (r = -0.72) and blunted changes in PBF from rest to exercise (r = -0.69) (p < 0.01). Ventilation "wasted" in emphysematous areas is associated with impaired exercise ventilatory efficiency in mild-to-moderate COPD. Exercise ventilatory inefficiency links structure (emphysema) and function (D L CO) to a key clinical outcome (poor exercise tolerance) in COPD patients with only modest spirometric abnormalities.

Risk-based decision making to manage water quality failures caused by combined sewer overflows

NASA Astrophysics Data System (ADS)

Sriwastava, A. K.; Torres-Matallana, J. A.; Tait, S.; Schellart, A.

2017-12-01

Regulatory authorities set certain environmental permit for water utilities such that the combined sewer overflows (CSO) managed by these companies conform to the regulations. These utility companies face the risk of paying penalty or negative publicity in case they breach the environmental permit. These risks can be addressed by designing appropriate solutions such as investing in additional infrastructure which improve the system capacity and reduce the impact of CSO spills. The performance of these solutions is often estimated using urban drainage models. Hence, any uncertainty in these models can have a significant effect on the decision making process. This study outlines a risk-based decision making approach to address water quality failure caused by CSO spills. A calibrated lumped urban drainage model is used to simulate CSO spill quality in Haute-Sûre catchment in Luxembourg. Uncertainty in rainfall and model parameters is propagated through Monte Carlo simulations to quantify uncertainty in the concentration of ammonia in the CSO spill. A combination of decision alternatives such as the construction of a storage tank at the CSO and the reduction in the flow contribution of catchment surfaces are selected as planning measures to avoid the water quality failure. Failure is defined as exceedance of a concentration-duration based threshold based on Austrian emission standards for ammonia (De Toffol, 2006) with a certain frequency. For each decision alternative, uncertainty quantification results into a probability distribution of the number of annual CSO spill events which exceed the threshold. For each alternative, a buffered failure probability as defined in Rockafellar & Royset (2010), is estimated. Buffered failure probability (pbf) is a conservative estimate of failure probability (pf), however, unlike failure probability, it includes information about the upper tail of the distribution. A pareto-optimal set of solutions is obtained by performing mean- pbf optimization. The effectiveness of using buffered failure probability compared to the failure probability is tested by comparing the solutions obtained by using mean-pbf and mean-pf optimizations.

Gene-by-environment interactions of the CLOCK, PEMT, and GHRELIN loci with average sleep duration in relation to obesity traits using a cohort of 643 New Zealand European children.

PubMed

Krishnan, Mohanraj; Shelling, Andrew N; Wall, Clare R; Mitchell, Edwin A; Murphy, Rinki; McCowan, Lesley M E; Thompson, John M D

2017-09-01

Modern technology may have desensitised the 'biological clock' to environmental cues, disrupting the appropriate co-ordination of metabolic processes. Susceptibility to misalignment of circadian rhythms may be partly genetically influenced and effects on sleep quality and duration could predispose to poorer health outcomes. Shorter sleep duration is associated with obesity traits, which are brought on by an increased opportunity to eat and/or a shift of hormonal profile promoting hunger. We hypothesised that increased sleep duration will offset susceptible genetic effects, resulting in reduced obesity risk. We recruited 643 (male: 338; female: 305) European children born to participants in the New Zealand centre of the International Screening for Pregnancy Endpoints sleep study. Ten genes directly involved in the circadian rhythm machinery and a further 20 genes hypothesised to be driven by cyclic oscillations were evaluated by Sequenom assay. Multivariable regression was performed to test the interaction between gene variants and average sleep length (derived from actigraphy), in relation to obesity traits (body mass index (BMI) z-scores and percentage body fat (PBF)). No association was found between average sleep length and BMI z-scores (p = 0.056) or PBF (p = 0.609). Uncorrected genotype associations were detected between STAT-rs8069645 (p = 0.0052) and ADIPOQ-rs266729 (p = 0.019) with differences in average sleep duration. Evidence for uncorrected gene-by-sleep interactions of the CLOCK-rs4864548 (p = 0.0039), PEMT-936108 (p = 0.016) and GHRELIN-rs696217 (p = 0.046) were found in relation to BMI z-scores but not for PBF. Our results indicate that children may have different genetic susceptibility to the effects of sleep duration on obesity. Further confirmatory studies are required in other population cohorts of different age groups. Copyright © 2017 Elsevier B.V. All rights reserved.

Overweight in children and adolescents associated with TV viewing and parental weight: Project HeartBeat!

PubMed

Steffen, Lyn M; Dai, Shifan; Fulton, Janet E; Labarthe, Darwin R

2009-07-01

Parental obesity and TV viewing are risk factors for childhood obesity. This study assessed the association of children's TV viewing and computer use with body mass and examined whether parental weight status modified the association. Cross-sectional associations of parental weight status, hours of TV viewing and computer use, and children's body composition were studied in a subsample of 526 black and nonblack children, aged 8, 11, and 14 years at baseline, enrolled in Project HeartBeat!, a longitudinal study of cardiovascular disease risk factors, 1991-1995. BMI, fat-free mass (FFM), and percent body fat (PBF) were calculated from children's body composition measured at baseline. Children's TV viewing and computer use habits and parental height and weight were self-reported. Multivariate regression analysis was used in assessing inter-relations of parental weight status and child's TV viewing and computer use habits with BMI, FFM, PBF, and risk for overweight status (BMI > or =85th percentile), adjusting for age, gender, race, and Tanner stage. Children of one or two overweight/obese parents watched an average of 22+/-6 minutes or 30+/-11 minutes more TV per day than children of normal-weight parents, respectively (both p<0.01). In multivariate regression analyses, BMI and PBF increased significantly by 0.42 kg/m(2) and 1.14% (both p<0.001), respectively, for each hour of TV watched among children with overweight parents, but not for those with normal-weight parents (p(interaction)<0.05). Similar results were observed for total screen time. These study findings are consistent with a genetic contribution of parental weight; however, overweight/obese parents may also exhibit behavior patterns that negatively influence children's TV viewing and have an impact on child overweight status. The effect of parental BMI on children's BMI may have both a genetic and an environmental linkage.

Shifting from Enrollment-to Performance-Based Funding in Higher Education: What Can We Learn from Washington's Experience?

ERIC Educational Resources Information Center

Kaikkonen, Darby

2016-01-01

Performance-based funding (PBF) in higher education has grown in recent years as a means of institutional accountability and incentive for improving student success. Although most states have successfully implemented their respective systems, research on early funding models suggests a difficult fiscal environment can introduce tension between…

Chemical and enzymatic catalytic routes to polyesters and oligopeptides biobased materials

NASA Astrophysics Data System (ADS)

Zhu, Jianhui

My Ph.D research focuses on the synthesis and property studies of different biobased materials, including polyesters, polyurethanes and oligopeptides. The first study describes the synthesis, crystal structure and physico-mechanical properties of a bio-based polyester prepared from 2,5-furandicarboxylic acid (FDCA) and 1,4-butanediol. Melt-polycondensation experiments were conducted by a two-stage polymerization using titanium tetraisopropoxide (Ti[OiPr] 4) as catalyst. Polymerization conditions (catalyst concentration, reaction time and 2nd stage reaction temperature) were varied to optimize poly(butylene furan dicarboxylate), PBF, molecular weight. A series of PBFs with different Mw were characterized by Differential Scanning Calorimetry (DSC), Thermogravimetric Analysis (TGA), Dynamic Mechanical Thermal Analysis (DMTA), X-Ray diffraction and tensile testing. Influence of molecular weight and melting/crystallization enthalpy on PBF material tensile properties was explored. Cold-drawing tensile tests at room temperature for PBF with Mw 16K to 27K showed a brittle-to-ductile transition. When Mw reaches 38K, the Young's Modulus of PBF remains above 900 MPa, and the elongation at break increases to above 1000%. The mechanical properties, thermal properties and crystal structures of PBF were similar to petroleum derived poly(butylenes terephthalate), PBT. Fiber diagrams of uniaxially stretched PBF films were collected, indexed, and the unit cell was determined as triclinic (a=4.78(3) A, b=6.03(5) A, c=12.3(1) A, alpha=110.1(2)°, beta=121.1(3)°, gamma=100.6(2)°). A crystal structure was derived from this data and final atomic coordinates are reported. We concluded that there is a close similarity of the PBF structure to PBT alpha- and beta-forms. In the second study, a biobased long chain polyester polyol (PC14-OH) was synthesized from o-hydroxytetradecanoic acid (o-HOC14) and 1,4-butanediol. The first section about polyester polyurethanes describes the synthesis and physico-mechanical properties for two series of linear polyurethane elastomers built from polyol polyesters which contain bio-based o-hydroxytetradecanoic acid (o-HOC14) repeat units. Varied quantities of o-HOC14 was converted by a condensation polymerization catalyzed by titanium tetraisopropoxide (Ti[OiPr]4) to polyester polyol with Mn around 2K. By end-cap the polyols with excess amount of 1,4-butanediol, low number of carbonyl end group can be achieved so that the polyols can be further used as soft segment of thermoplastic polyurethanes (TPU). We have studied the thermo-mechanical properties of two-series polyurethanes with different polyester polyols or polyester polyols mixtures. With increasing amount of o-HOC14 content in the soft segment polyols of polyurethanes, tensile strength of the polyurethanes kept increasing from 30MPa to 470MPa while at the same time their elongation ratio decreased from 900% to 300%. Their mechanical behavior shifted from elastomer to semi-crystalline plastic. In the second section about polyether polyurethanes, PC14-OH and poly(tetrahydrofuran) mixtures were used as soft segment in linear polyurethane elastomer synthesis. Similar thermal and mechanical property changing trends were observed with increasing amount of PC14-OH up to 30 wt% of total soft segments. In this study, the functions of PC14-OH in thermoplastic polyurethane elastomers were identified, and there are several benefits of incorporating this long chain fatty acid. In the third study, seven amphiphilic alternating oligopeptides were synthesized via chemo-enzymatic routes. Four proteases (papain, bromelain, alpha-chymotrypsin, and trypsin) were evaluated to determine their efficiency in synthesizing alternating peptides. The first series is hydrophobic-anionic alternating oligopeptides targeting for self assembly smart material design. So far, beta-sheet secondary structure of the anionic alternating oligopeptides was not observed very clearly at low pH comparing to the cationic alternating oligopeptides (KL)x, which is probably due to the short chain length of the oligopeptides. Combination of cationic and anionic alternating oligopeptides has been tested by (KL)x and (LD)x mixtures at 1:1 weight ratio, beta-sheet secondary structure started to appear at neutral pH. The preliminary CD results of the mixtures have shown the potential to manipulate self assembly behavior at different pHs. The second series is alternating oligo(Lys-Trp) targeting for antimicrobial agent design. The alternating (KW)x was successfully synthesized by alpha-chymotrypsin in mixed solvent medium. Chain length of (KW)x can be varied when using different mixed solvent medium. In order to increase the solubility of (KW)x-OEt, C-terminal ethyl ester moiety was modified by reaction with ethylene diamine. Antimicrobial activities of (KW)x with different chain lengths have been tested against E.coli and S. aureus. Our work utilizes a simplified synthetic method to prepare alternating peptides at the cost of chain length uniformity. However, (KW)x-OEt (n=3--6) alternating peptide mixtures still possesses quite good antimicrobial activity while the preparation method is much more easier and greener, which means this method is more economical and environmental friendly. Moreover, the adjustment of reaction conditions and proteases can successfully enhance the control over KW alternating peptide chain length to better achieve more antimicrobial active products. (Abstract shortened by UMI.).

75 FR 38813 - Granting of Request for Early Termination of the Waiting Period Under the Premerger Notification...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-06

... status Party name 26-APR-10 20100597 G PBF Energy Partners LP. G Valero Energy Corporation. G The Premcor.... G Armstrong World Industries, Inc. G Asbestos Personal Injury. G Armstrong World Industries, Inc. 20100605 G Brookfield Special Situations II L.P. G Ainsworth Lumber Co. Ltd. G Ainsworth Lumber Co. Ltd...

19 F(α,n) thick target yield from 3.5 to 10.0 MeV

DOE PAGES

Norman, E.B.; Chupp, T.E.; Lesko, K.T.; ...

2015-09-01

Using a target of PbF2, the thick-target yield from the 19F(α,n) reaction was measured from Eα=3.5–10 MeV. From these results, we infer the thick-target neutron yields from targets of F2 and UF6 over this same alpha-particle energy range.

Yb3+-Er3+-Tm3+ co-doped nano-glass-ceramics tuneable up-conversion phosphor

NASA Astrophysics Data System (ADS)

Méndez-Ramos, J.; Rodriguez, V. D.; Tikhomirov, V. K.; Del-Castillo, J.; Yanes, A. C.

2008-08-01

Transparent Yb3+-Er3+-Tm3+ co-doped nano-glass-ceramics have been prepared, 32(SiO{2}) 9(AlO{1.5}) 31.5(CdF{2}) 18.5(PbF{2}) 5.5(ZnF{2}): 3.5(Yb-Er-TmF{3}) mol%, where the co-dopants partition mostly to the fluoride PbF{2}-based nano-crystals. A comparative study of the up-conversion luminescence in nano-glass-ceramics and its precursor glass indicates that these materials can be used as blue/green/red tuneable up-conversion phosphor, in particular for white light generation. A ratio between blue, green and red emission bands of the Tm3+ and Er3+ can be widely varied with nano-ceramming of the precursor glass and with changing a pump power of luminescence. The change in the ratio between the blue, green and red emission bands is explained to be due to substantial lowering phonon energy and shortening of inter-dopant distances with nano-ceramming of the precursor glass and due to change in the ratio of 2- and 3-photon up-conversion processes with pump power.

Cardiovascular transition at birth: a physiological sequence.

PubMed

Hooper, Stuart B; Te Pas, Arjan B; Lang, Justin; van Vonderen, Jeroen J; Roehr, Charles Christoph; Kluckow, Martin; Gill, Andrew W; Wallace, Euan M; Polglase, Graeme R

2015-05-01

The transition to newborn life at birth involves major cardiovascular changes that are triggered by lung aeration. These include a large increase in pulmonary blood flow (PBF), which is required for pulmonary gas exchange and to replace umbilical venous return as the source of preload for the left heart. Clamping the umbilical cord before PBF increases reduces venous return and preload for the left heart and thereby reduces cardiac output. Thus, if ventilation onset is delayed following cord clamping, the infant is at risk of superimposing an ischemic insult, due to low cardiac output, on top of an asphyxic insult. Much debate has centered on the timing of cord clamping at birth, focusing mainly on the potential for a time-dependent placental to infant blood transfusion. This has prompted recommendations for delayed cord clamping for a set time after birth in infants not requiring resuscitation. However, recent evidence indicates that ventilation onset before cord clamping mitigates the adverse cardiovascular consequences caused by immediate cord clamping. This indicates that the timing of cord clamping should be based on the infant's physiology rather than an arbitrary period of time and that delayed cord clamping may be of greatest benefit to apneic infants.

Plasma-Based Mixing Actuation in Airflow, Quantitated by Probe Breakdown Fluorescence

NASA Astrophysics Data System (ADS)

Leonov, Sergey; Firsov, Alexander; Shurupov, Michail; Yarantsev, Dmitry; Ohio State University Team; JIHT RAS Team

2013-09-01

Effective mixing of fuel and oxidizer in air-breathing engine at compressible conditions is an essential problem of high-speed combustion due to short residence time of gas mixture in the combustor of limited length. The effect of the mixing actuation by plasma is observed because of the gasdynamic instability arisen after the long filamentary discharge of submicrosecond duration generated along the contact zone of two co-flown gases. The work is focused on detail consideration of the mechanism of gas instability, promoted by plasma, on effect of the discharge specific localization, and on diagnostics development for qualitative and quantitative estimation of the mixing efficiency. The dynamics of relative concentration of gas components is examined quantitatively by means of Probe Discharge Breakdown Fluorescence (PBF). In this method an optical emission spectra of weak filamentary high-voltage nanosecond probe discharge are collected from local zone of interest in airflow. The first measurements of the mixing efficiency in vicinity of wall-injected secondary gas are presented. It is shown that the method of PBF could deliver experimental data on state of the two-component medium with <1 mcs and <5 mm of time and spatial resolution, correspondingly. Funded by AFOSR under Dr Chiping Li supervision

Food prices and body fatness among youths.

PubMed

Grossman, Michael; Tekin, Erdal; Wada, Roy

2014-01-01

We examine the effect of food prices on clinical measures of obesity, including body mass index (BMI) and percentage body fat (PBF) measures derived from bioelectrical impedance analysis (BIA) and dual energy X-ray absorptiometry (DXA), among youths ages 12 through 18 in the National Health and Nutrition Examination Survey. This is the first study to consider clinically measured levels of body composition rather than BMI to investigate the effects of food prices on obesity outcomes among youths classified by gender and race/ethnicity. Our findings suggest that increases in the real price per calorie of food for home consumption and the real price of fast-food restaurant food lead to improvements in obesity outcomes among youths. We also find that a rise in the real price of fruits and vegetables leads to increased obesity. Finally, our results indicate that measures of PBF derived from BIA and DXA are no less sensitive and in some cases more sensitive to the prices just mentioned than BMI, and serve an important role in demonstrating that rising food prices (except fruit and vegetable prices) are indeed associated with reductions in obesity rather than with reductions in body size proportions alone. Copyright © 2013 Elsevier B.V. All rights reserved.

Demonstration of array eddy current technology for real-time monitoring of laser powder bed fusion additive manufacturing process

NASA Astrophysics Data System (ADS)

Todorov, Evgueni; Boulware, Paul; Gaah, Kingsley

2018-03-01

Nondestructive evaluation (NDE) at various fabrication stages is required to assure quality of feedstock and solid builds. Industry efforts are shifting towards solutions that can provide real-time monitoring of additive manufacturing (AM) fabrication process layer-by-layer while the component is being built to reduce or eliminate dependence on post-process inspection. Array eddy current (AEC), electromagnetic NDE technique was developed and implemented to directly scan the component without physical contact with the powder and fused layer surfaces at elevated temperatures inside a LPBF chamber. The technique can detect discontinuities, surface irregularities, and undesirable metallurgical phase transformations in magnetic and nonmagnetic conductive materials used for laser fusion. The AEC hardware and software were integrated with the L-PBF test bed. Two layer-by-layer tests of Inconel 625 coupons with AM built discontinuities and lack of fusion were conducted inside the L-PBF chamber. The AEC technology demonstrated excellent sensitivity to seeded, natural surface, and near-surface-embedded discontinuities, while also detecting surface topography. The data was acquired and imaged in a layer-by-layer sequence demonstrating the real-time monitoring capabilities of this new technology.

Finite Element Analysis of Interaction of Laser Beam with Material in Laser Metal Powder Bed Fusion Process.

PubMed

Fu, Guang; Zhang, David Z; He, Allen N; Mao, Zhongfa; Zhang, Kaifei

2018-05-10

A deep understanding of the laser-material interaction mechanism, characterized by laser absorption, is very important in simulating the laser metal powder bed fusion (PBF) process. This is because the laser absorption of material affects the temperature distribution, which influences the thermal stress development and the final quality of parts. In this paper, a three-dimensional finite element analysis model of heat transfer taking into account the effect of material state and phase changes on laser absorption is presented to gain insight into the absorption mechanism, and the evolution of instantaneous absorptance in the laser metal PBF process. The results showed that the instantaneous absorptance was significantly affected by the time of laser radiation, as well as process parameters, such as hatch space, scanning velocity, and laser power, which were consistent with the experiment-based findings. The applicability of this model to temperature simulation was demonstrated by a comparative study, wherein the peak temperature in fusion process was simulated in two scenarios, with and without considering the effect of material state and phase changes on laser absorption, and the simulated results in the two scenarios were then compared with experimental data respectively.

Meal ingestion markedly increases liver stiffness suggesting the need for liver stiffness determination in fasting conditions.

PubMed

Alvarez, Daniel; Orozco, Federico; Mella, José María; Anders, Maria; Antinucci, Florencia; Mastai, Ricardo

2015-01-01

The introduction of noninvasive liver stiffness (LS) determination has heralded a new stage in the diagnosis and treatment of liver fibrosis. We evaluated the effect of food intake on LS in patients with different degrees of liver disease. We evaluated 24 patients (F≤1, n=11 and F> 1, n=13). LS (Fibroscan®) and portal blood flow (PBF) (Doppler ultrasound) were studied before and 30min after ingestion of a standard liquid meal. Food intake increased PBF (51±10%, p<0.001). Splanchnic hyperemia was accompanied by a significant rise in LS (from 7.8±3.3 to 10.3±4.1kPa, p<0.001). These increases were similar in patients with minimal fibrosis(F≤1) and in those with more advanced fibrosis or cirrhosis (F>1). Hemodynamic and LS values returned to baseline pre-meal levels within 2hours. LS increases markedly after ingestion of a standard meal, irrespective of the degree of fibrosis. Our results strongly suggest that LS should be measured in fasting conditions. Copyright © 2015 Elsevier España, S.L.U. and AEEH y AEG. All rights reserved.

Heat treatment versus properties studies associated with the Inconel 718 PBF acoustic filters

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smolik, G.R.; Reuter, W.G.

PBF acoustic filter Unit No. 1 cracked when heat treatment was attempted. The effects of prior thermal cycling, solution anneal temperature, and cooling rate from solution anneals were investigated. The investigations concerned influences of the above variables upon both 1400$sup 0$F stress rupture solution- annealed properties and room temperature age-hardened properties. 1400$sup 0$F stress rupture properties were of interest to assist the prevention of cracking during heat treatments. Room temperature age-hardened properties were needed to ensure that design requirement would be provided. Prior thermal cycling was investigated to determine if extra thermal cycles would be detrimental to the repaired filter.more » Slow furnace cools were considered as a means of reducing thermal stresses. Effects of solution annealing at 2000 and 1900$sup 0$F were also determined. Test results showed that slow cooling rates would not only reduce thermal stresses but also improve 1400$sup 0$F ductility. A modified aging treatment was established which provided the required 145 ksi room temperature yield strength for the slowly cooled material. Prior cooling did not degrade final age-hardened room temperature tensile or impact properties. (auth)« less

Process Evaluation of AISI 4340 Steel Manufactured by Laser Powder Bed Fusion

NASA Astrophysics Data System (ADS)

Jelis, Elias; Hespos, Michael R.; Ravindra, Nuggehalli M.

2018-01-01

Laser powder bed fusion (L-PBF) involves the consolidation of metal powder, layer by layer, through laser melting and solidification. In this study, process parameters are optimized for AISI 4340 steel to produce dense and homogeneous structures. The optimized process parameters produce mechanical properties at the center of the build plate that are comparable to wrought in the vertical and horizontal orientations after heat treatment and machining. Four subsequent builds are filled with specimens to evaluate the mechanical behavior as a function of location and orientation. Variations in the mechanical properties are likely due to recoater blade interactions with the powder and uneven gas flow. The results obtained in this study are analyzed to assess the reliability and reproducibility of the process. A different build evaluates the performance of near-net-shaped tensile specimens angled 35°-90° from the build plate surface (horizontal). Ductility measurements and surface roughness vary significantly as a function of the build angle. In the stress-relieved and as-built conditions, the mechanical behavior of vertically oriented specimens exhibits somewhat lower and more variable ductility than horizontally oriented specimens. Therefore, several process variables affect the mechanical properties of parts produced by the L-PBF process.

Fluoride glass compositions

DOE Office of Scientific and Technical Information (OSTI.GOV)

El-Bayoumi, O.

1983-08-09

This invention relates to Fluoride-based glasses that exhibit a high degree of transparency throughout the near ultraviolet visible and mid infrared portions of the spectrum. The glasses are composed of MgF2 and ZnF2 as essential compositional ingredients together with at least two other metallic fluorides from the group of YbF3, ThF4, PbF2, A1F3 and MnF2.

Additive Manufacturing of Fuel Injectors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sadek Tadros, Dr. Alber Alphonse; Ritter, Dr. George W.; Drews, Charles Donald

Additive manufacturing (AM), also known as 3D-printing, has been shifting from a novelty prototyping paradigm to a legitimate manufacturing tool capable of creating components for highly complex engineered products. An emerging AM technology for producing metal parts is the laser powder bed fusion (L-PBF) process; however, industry manufacturing specifications and component design practices for L-PBF have not yet been established. Solar Turbines Incorporated (Solar), an industrial gas turbine manufacturer, has been evaluating AM technology for development and production applications with the desire to enable accelerated product development cycle times, overall turbine efficiency improvements, and supply chain flexibility relative to conventionalmore » manufacturing processes (casting, brazing, welding). Accordingly, Solar teamed with EWI on a joint two-and-a-half-year project with the goal of developing a production L-PBF AM process capable of consistently producing high-nickel alloy material suitable for high temperature gas turbine engine fuel injector components. The project plan tasks were designed to understand the interaction of the process variables and their combined impact on the resultant AM material quality. The composition of the high-nickel alloy powders selected for this program met the conventional cast Hastelloy X compositional limits and were commercially available in different particle size distributions (PSD) from two suppliers. Solar produced all the test articles and both EWI and Solar shared responsibility for analyzing them. The effects of powder metal input stock, laser parameters, heat treatments, and post-finishing methods were evaluated. This process knowledge was then used to generate tensile, fatigue, and creep material properties data curves suitable for component design activities. The key process controls for ensuring consistent material properties were documented in AM powder and process specifications. The basic components of the project were: • Powder metal input stock: Powder characterization, dimensional accuracy, metallurgical characterization, and mechanical properties evaluation. • Process parameters: Laser parameter effects, post-printing heat-treatment development, mechanical properties evaluation, and post-finishing technique. • Material design curves: Room and elevated temperature tensiles, low cycle fatigue, and creep rupture properties curves generated. • AM specifications: Key metal powder characteristics, laser parameters, and heat-treatment controls identified.« less

Prescribing patterns and associated factors of antibiotic prescription in primary health care facilities of Kumbo East and Kumbo West Health Districts, North West Cameroon

PubMed Central

Chem, Elvis Dzelamonyuy; Anong, Damian Nota; Akoachere, Jane-Francis K. T.

2018-01-01

Background Inappropriate use of antibiotics is a global public health challenge and has been associated with antibiotic resistance. WHO reports show that efforts to promote rational antibiotic use in developing countries are poor. With the growing number of infections with antibiotic resistant bacteria, rational drug use becomes imperative and studies that promote rational drug use are highly necessary. Considering this, we investigated prescribing patterns and predictors of antibiotic prescription in primary health care facilities in Kumbo East (KE) and Kumbo West (KW) health districts in North West Cameroon, to contribute data which could influence policy on antibiotic use. Methods and findings A cross sectional retrospective study was conducted from April 2014 to April 2015 in 26 randomly selected primary care facilities. Questionnaires were administered to 59 antibiotic prescribers to determine factors that predict antibiotic prescribing. Data on antibiotic prescription were collected by review of consultation registers. Prescription rates and demographics, prescriber and institution factors were analyzed using ANOVA. The best predictor of prescription was determined using multiple linear regression analysis. Results A total of 30,096 prescriptions were reviewed. Overall antibiotic prescription rate was 36.71%, with a mean of 1.14 antibiotics prescribed per patient. Amoxicillin was the most prescribed (29.9%). The most prevalent indications for prescribing were respiratory tract infections (21.27%). All antibiotics prescribed were broad-spectrum. Antibiotics were prescribed for patients with malaria and also in situations where diagnosis was uncertain. Prescribing by generic name was 98.36% while 99.87% was from Essential Drug List. Use of laboratory results, patient turnout and Performance Based Financing (PBF) were significantly associated with antibiotic prescribing rates (p < 0.05). PBF moderated prescribing. Conclusion There was misuse of antibiotics in primary care facilities in study area. We recommend all primary care health facilities in study area to be included in the PBF scheme and that prescribing should only be done by physicians as the have adequate training. PMID:29505584

Cytokine signalling in rat pulp interstitial fluid and transcapillary fluid exchange during lipopolysaccharide-induced acute inflammation

PubMed Central

Bletsa, Athanasia; Berggreen, Ellen; Fristad, Inge; Tenstad, Olav; Wiig, Helge

2006-01-01

The dental pulp consists of loose connective tissue encased in rigid dentinal walls. Because of its topography the tissue has low interstitial compliance and limited capacity to expand during fluid volume changes. Due to limitations regarding access to interstitial fluid, basic knowledge on transcapillary fluid transport parameters is lacking for this organ. The scope of this project was dual: first we aimed at establishing a method for isolation of pulp interstitial fluid (IF), and second we applied the method in rats subjected to lipopolysaccharide (LPS)-induced endotoxaemia. The aim was to measure colloid osmotic pressure (COP) and pro-inflammatory cytokines in the pulp IF during acute inflammation. Fluid volumes and pulpal blood flow (PBF) were measured to obtain more information about microcirculatory changes that take place in this pulpitis model. By centrifugation of incisor pulp at 239 g we were able to extract fluid representative for IF. Pulp IF had a relative high control COP (∼83% of plasma COP) and was similar to plasma COP 3 h after LPS challenge. The pulp exhibited a high content of IF (0.60 ± 0.03 ml (g wet weight)−1) and a vascular volume of 0.03 ± 0.01 ml (g w.w.)−1 No differences were observed in the distribution of fluid volumes after 1.5 and 3 h LPS exposure. PBF and systemic blood pressure dropped significantly after LPS administration. PBF remained low whereas systemic blood pressure was re-established during the 3-h period, implying organ dysfunction. There was a differential pattern of cytokine expression in pulp IF and serum with cytokines such as IL-1α, IL-1β and TNF-α locally produced, whereas others such as IFN-γ and IL-6 were produced systemically and probably spilled over to the pulp IF after LPS exposure. Our findings show that pulp IF can be isolated by centrifugation and that this method is useful when studying fluid balance and extracellular signalling mechanisms in the dental pulp in normal and pathological conditions. PMID:16527857

Enhancement of luminescence properties in Er3+ doped TeO2-Na2O-PbX (X=O and F) ternary glasses.

PubMed

Kumar, Kaushal; Rai, S B; Rai, D K

2007-04-01

An enhancement of luminescence properties in Er3+ doped ternary glasses is observed on the addition of PbO/PbF2. The infrared to visible upconversion emission bands are observed at 410, 525, 550 and 658 nm, due to the 2H9/2-->4I15/2, 2H11/2-->4I15/2, 4S3/2-->4I15/2, 4F9/2-->4I15/2 transitions respectively, on excitation with 797 nm laser line. A detailed study reveals that the 2H9/2-->4I15/2 transition arises due to three step upconversion process while other transitions arise due to two step absorption. On excitation with 532 nm radiation, ultraviolet and violet upconversion bands centered at 380, 404, 410 and 475 nm wavelengths are observed along with one photon luminescence bands at 525, 550, 658 and 843 nm wavelengths. These bands are found due to the 4G11/2-->4I15/2, 2P3/2-->4I13/2, 2H9/2-->4I15/2, 2P3/2-->4I11/2, 2H11/2-->4I15/2, 4S3/2-->4I15/2, 4F9/2-->4I15/2 and 4S3/2-->4I13/2 transitions, respectively. Though incorporation of PbO and PbF2 both enhances fluorescence intensities however, PbF2 content has an important influence on upconversion luminescence emission. The incorporation of PbF2 enhances the red emission (658 nm) intensity by 1.5 times and the violet emission (410 nm) intensity by 2.0 times. A concentration dependence study of fluorescence reveals the rapid increase in the red (4F9/2-->4I15/2) emission intensity relative to the green (4S3/2-->4I15/2) emission with increase in the Er3+ ion concentration. This behaviour has been explained in terms of an energy transfer by relaxation between excited ions.

Engineering Technical Support Center Annual Report Fiscal Year 2015

EPA Science Inventory

The United States Environmental Protection Agency (EPA or Agency) Office of Research and Development (ORD) created the Engineering Technical Support Center (ETSC) in 1987, one of several technical support centers created as part of the Technical Support Project (TSP). ETSC provid...

Technical Support for Contaminated Sites | Science Inventory ...

EPA Pesticide Factsheets

In 1987, the U.S. Environmental Protection Agency’s (EPA) Office of Research and Development (ORD), Office of Land and Emergency Management, and EPA Regional waste management offices established the Technical Support Project. The creation of the Technical Support Project enabled ORD to provide effective technical assistance by ensuring ORD scientists and engineers were accessible to the Agency’s Office and Regional decision makers, including Remedial Project Managers, On-Scene Coordinators, and corrective action staff. Five ORD Technical Support Centers (TSCs) were created to facilitate this technical assistance. Three of the five TSCs are supported by the Sustainable and Healthy Communities Research Program, and are summarized in the poster being presented:• Engineering Technical Support Center (ETSC) in Cincinnati, Ohio• Ground Water Technical Support Center (GWTSC) in Ada, Oklahoma• Site Characterization and Monitoring Technical Support Center (SCMTSC) in Atlanta, GeorgiaOver the past 29 years, the Technical Support Centers have provided numerous influential products to its internal Agency clients and to those at the State level (through the EPA Regions). These products include, but are not limited to the following: Annual TSC reports from the three Centers, a hard-rock mining conference every other year, PRO-UCL software development for site characterization statistics, groundwater modeling using state-of-the-art modeling software, numerical mo

ORD Scientific and Engineering Technical Support for RPMs – Ground Water Technical Support Center

EPA Science Inventory

ORD Scientific and Engineering Technical Support for RPMs (and Others) is a hybrid informational and panel session that focuses on the technical support available from EPA’s Office of Research and Development (ORD) to RPMs and other EPA cleanup program staff. Examples of technica...

Obtaining Technical Support for Superfund, RCRA and Brownfields Site Issues Fact Sheet

EPA Pesticide Factsheets

EPA’s Technical Support Centers (TSCs) and other technical support services are available to Regional RemedialProject Managers, Corrective Action Staff, and On-Scene Coordinators needing specialized technical expertisefor specific tasks or projects.

Fluor Hanford, Inc. Groundwater and Technical Integration Support (Master Project) Quality Assurance Management Plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fix, N. J.

The scope of the Fluor Hanford, Inc. Groundwater and Technical Integration Support (Master Project) is to provide technical and integration support to Fluor Hanford, Inc., including operable unit investigations at 300-FF-5 and other groundwater operable units, strategic integration, technical integration and assessments, remediation decision support, and science and technology. This Quality Assurance Management Plan provides the quality assurance requirements and processes that will be followed by the Fluor Hanford, Inc. Groundwater and Technical Integration Support (Master Project).

Portal-drained viscera heat production in Iberian pigs fed betaine- and conjugated linoleic acid-supplemented diets.

PubMed

Rojas-Cano, María Luz; Lachica, Manuel; Lara, Luis; Haro, Ana; Fernández-Fígares, Ignacio

2017-01-01

Betaine and conjugated linoleic acid (CLA) may alter growth and body composition in pigs, although their mode of action is not well understood. Portal-drained viscera (PDV) have a disproportionate influence with respect to their masses, and this may affect the productivity of more profitable tissues. The objective of this study was to determine if the use of betaine and/or CLA in the diet affects PDV heat production. Postprandial portal blood flow (PBF) was greater (19.0%, P = 0.004) for control compared with the other three diets. The lowest (P < 0.001) value for postprandial PDV O 2 consumption corresponded to betaine + CLA followed by betaine and CLA diets (32.7, 25.4 and 17.7% respectively with respect to control diet). Postprandial PDV heat production was greater (26.4%, P < 0.001) for control with respect to the other three diets, with the minimum value corresponding to betaine + CLA (34.1% lower than control). Supplementation with betaine and/or CLA reduced the PBF, O 2 consumption and therefore PDV heat production with respect to control diet. This effect was more pronounced when betaine and CLA were supplemented together, potentially increasing the energy availability for other body tissues. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

Process defects and in situ monitoring methods in metal powder bed fusion: a review

NASA Astrophysics Data System (ADS)

Grasso, Marco; Colosimo, Bianca Maria

2017-04-01

Despite continuous technological enhancements of metal Additive Manufacturing (AM) systems, the lack of process repeatability and stability still represents a barrier for the industrial breakthrough. The most relevant metal AM applications currently involve industrial sectors (e.g. aerospace and bio-medical) where defects avoidance is fundamental. Because of this, there is the need to develop novel in situ monitoring tools able to keep under control the stability of the process on a layer-by-layer basis, and to detect the onset of defects as soon as possible. On the one hand, AM systems must be equipped with in situ sensing devices able to measure relevant quantities during the process, a.k.a. process signatures. On the other hand, in-process data analytics and statistical monitoring techniques are required to detect and localize the defects in an automated way. This paper reviews the literature and the commercial tools for in situ monitoring of powder bed fusion (PBF) processes. It explores the different categories of defects and their main causes, the most relevant process signatures and the in situ sensing approaches proposed so far. Particular attention is devoted to the development of automated defect detection rules and the study of process control strategies, which represent two critical fields for the development of future smart PBF systems.

Comparison of arsenic content in pelletized poultry house waste and biosolids fertilizer.

PubMed

Nachman, Keeve E; Mihalic, Jana N; Burke, Thomas A; Geyh, Alison S

2008-03-01

Managers of human biosolids have been incorporating the practice of waste pelletization for use as fertilizer since the mid 1920s, and waste pelletization has recently been embraced by some poultry producers as a way to move nutrients away from saturated agricultural land. However, the presence of arsenic in pelletized poultry house waste (PPHW) resulting from the use of organoarsenical antimicrobial drugs in poultry production raises concerns regarding additional incremental population exposures. Arsenic concentrations were determined in PPHW and pelletized biosolids fertilizer (PBF) samples. Pellets were processed using strong acid microwave digestion and analyzed by graphite furnace atomic absorption spectroscopy. The mean arsenic concentration in PPHW (20.1 ppm) fell within the lower part of the range of previously report arsenic concentrations in unpelletized poultry house waste. Arsenic concentrations in PBF, the source of which is less clear than for PPHW, were approximately a factor of 5 times lower than those in PPHW, with a mean concentration of 4.1 ppm. The pelletization and sale of these biological waste fertilizers present new pathways of exposure to arsenic in consumer populations who would otherwise not come into contact with these wastes. Arsenic exposures in humans resulting from use of these fertilizer pellets should be quantified to avoid potential unintended negative consequences of managing wastes through pelletization.

78 FR 70586 - Technical Support Document: Technical Update of the Social Cost of Carbon for Regulatory Impact...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-26

... OFFICE OF MANAGEMENT AND BUDGET Technical Support Document: Technical Update of the Social Cost of... Budget, Executive Office of the President. ACTION: Notice of availability and request for comments. SUMMARY: The Office of Management and Budget (OMB) requests comments on the Technical Support Document...

EPA Technical Support Centers (TSC): FY14 Lessons ...

EPA Pesticide Factsheets

EPA’s Technical Support Centers (TSC) included in ORD’s Safe and Healthy Communities (SHC) Research Action Plan fill the need for supplying subject-matter experts to continually assess state-of-the-art research and practices and channel this information to users in both direct applications (i.e., site-specific technical support) and general applications (i.e., technical transfer activities such as technical guidance documents, conferences, or workshops) . The TSCs are charged with providing solutions by: 1) linking EPA research to Agency decision-makers; 2) applying best practices to real world field applications; and 3) channeling feedback from field application to research communities. The TSP goal is to provide Regional Remedial Project Managers (RPMs), Corrective Action Staff, and On-Scene Coordinators (OSCs) with a diverse set of readily-accessible resources for technical assistance. This research summary provides six case studies – two from each of the three TSCs (Ground Water Technical Support Center, Engineering Technical Support Center, and Site Characterization Technical Support Center) – to exemplify and summarize the variety of TSC approaches that contribute to fulfilling the TSP mission. EPA’s Technical Support Centers (TSC) included in ORD’s Safe and Healthy Communities (SHC) Research Action Plan fill the need for supplying subject-matter experts to continually assess state-of-the-art research and practices and channel this informati

The calorimeter system of the new muon g-2 experiment at Fermilab

DOE PAGES

Alonzi, L. P.; Anastasi, A.; Bjorkquist, R.; ...

2015-12-02

The electromagnetic calorimeter for the new muon ( g–2) experiment at Fermilab will consist of arrays of PbF 2 Cerenkov crystals read out by large-area silicon photo-multiplier (SiPM) sensors. Here, we report here the requirements for this system, the achieved solution and the results obtained from a test beam using 2.0–4.5 GeV electrons with a 28-element prototype array.

Technical Support Documents Used to Develop the Chesapeake Bay TMDL

EPA Pesticide Factsheets

The Chesapeake Bay TMDL development was supported by several technical documents for water quality standards and allocation methodologies specific to the Chesapeake Bay. This page provides the technical support documents.

SUPERFUND TECHNICAL SUPPORT

EPA Science Inventory

Under this task, technical support is provided to Regional Remedial Project Managers (RPMs)/On-Scene Coordinators (OSCs) at Superfund, RCRA, and Brownfields sites contaminated with hazardous materials by the Technical Support Center (TSC) for Monitoring and Site Characterization....

Providing Services to Virtual Patrons.

ERIC Educational Resources Information Center

Hulshof, Robert

1999-01-01

Discusses the types of services libraries need to support patrons who access the library via the Internet or e-mail. Highlights include issues in technical support; establishing policies and procedures; tools for technical support, including hardware and software; impacts of technical support on staff; and future possibilities. (LRW)

A 5-mm piezo-scanning fiber device for high speed ultrafast laser microsurgery

PubMed Central

Ferhanoglu, Onur; Yildirim, Murat; Subramanian, Kaushik; Ben-Yakar, Adela

2014-01-01

Towards developing precise microsurgery tools for the clinic, we previously developed image-guided miniaturized devices using low repetition rate amplified ultrafast lasers for surgery. To improve the speed of tissue removal while reducing device diameter, here we present a new 5-mm diameter device that delivers high-repetition rate laser pulses for high speed ultrafast laser microsurgery. The device consists of an air-core photonic bandgap fiber (PBF) for the delivery of high energy pulses, a piezoelectric tube actuator for fiber scanning, and two aspheric lenses for focusing the light. Its inline optical architecture provides easy alignment and substantial size reduction to 5 mm diameter as compared to our previous MEMS-scanning devices while realizing improved intensity squared (two-photon) lateral and axial resolutions of 1.16 μm and 11.46 μm, respectively. Our study also sheds light on the maximum pulse energies that can be delivered through the air-core PBF and identifies cladding damage at the input facet of the fiber as the limiting factor. We have achieved a maximum energy delivery larger than 700 nJ at 92% coupling efficiency. An in depth analysis reveals how this value is greatly affected by possible slight misalignments of the beam during coupling and the measured small beam pointing fluctuations. In the absence of these imperfections, self-phase modulation becomes the limiting factor for the maximum energy delivery, setting the theoretical upper bound to near 2 μJ for a 1-m long, 7-μm, air-core PBF. Finally, the use of a 300 kHz repetition rate fiber laser enabled rapid ablation of 150 µm x 150 µm area within only 50 ms. Such ablation speeds can now allow the surgeons to translate the surgery device as fast as ~4 mm/s to continuously remove a thin layer of a 150 µm wide tissue. Thanks to a high optical transmission efficiency of the in-line optical architecture of the device and improved resolution, we could successfully perform ablation of scarred cheek pouch tissue, drilling through a thin slice. With further development, this device can serve as a precise and high speed ultrafast laser scalpel in the clinic. PMID:25071946

24 CFR 583.140 - Technical assistance.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 24 Housing and Urban Development 3 2010-04-01 2010-04-01 false Technical assistance. 583.140... Technical assistance. (a) General. HUD may set aside funds annually to provide technical assistance, either... technical assistance is for the purpose of promoting the development of supportive housing and supportive...

America Makes: National Additive Manufacturing Innovation Institute (NAMII) Project 1: Nondestructive Evaluation (NDE) of Complex Metallic Additive Manufactured (AM) Structures

DTIC Science & Technology

2014-06-01

layer-by-layer manufacturing of a component by using PBF processes is accompanied by the establishment of a unidirectional heat transfer along the build...direction. Because grain growth during solidification preferably occurs in the opposite direction of heat transfer , the formation of elongated...development and deployment of phased array technology.[69] Phased array ultrasonic (PAUT) sensors use multiple elements instead of a single element

Performance evaluation of a dynamic telepathology system (Panoptiq™) in the morphologic assessment of peripheral blood film abnormalities.

PubMed

Goswami, R; Pi, D; Pal, J; Cheng, K; Hudoba De Badyn, M

2015-06-01

The study evaluated the performance of a dynamic imaging telepathology system (Panoptiq(™) ) as a diagnostic aid to the identification of peripheral blood film (PBF) abnormalities. The study assumed a laboratory personnel working in a clinical laboratory were operating the telepathology system to seek diagnostic opinion from an external consulting hematopathologist. The study examined 100 blood films, encompassing 23 different hematological diseases, reactive or normal cases. The study revealed that with real-time image transmission in live scanning mode of operation, the telepathology system was able to aid reviewers in achieving excellent accuracy, that is correct interpretation of morphologic abnormalities obtained in 83/84 of the hematologic diseases and 12/12 of the reactive/normal conditions (Sensitivity: 0.99; Specificity: 1.00). In contrast, when only saved static images in digital capture mode of operation were reviewed remotely, interpretative omissions occurred in 8/84 of the hematologic diseases and 0/12 of the reactive/normal conditions (Sensitivity: 0.91; Specificity: 1.00). It is hypothesized that real-time operator-reviewer communication during live scanning played an important role in the identification of key morphologic abnormalities for review. Our study showed the Panoptiq system can be adopted reliably as a dynamic telepathology tool in aiding community laboratories in the triage of PBF cases for external diagnostic consultation. © 2014 John Wiley & Sons Ltd.

Obesity and motor coordination ability in Taiwanese children with and without developmental coordination disorder.

PubMed

Zhu, Yi-Ching; Wu, Sheng K; Cairney, John

2011-01-01

The purpose of this study was to investigate the associations between obesity and motor coordination ability in Taiwanese children with and without developmental coordination disorder (DCD). 2029 children (1078 boys, 951 girls) aged nine to ten years were chosen randomly from 14 elementary schools across Taiwan. We used bioelectrical impedance analysis to measure percentage of body fat (PBF) and the Movement Assessment Battery for Children test (MABC test) to evaluate the motor coordination ability. Using cut-off points based on PBF from past studies, boys and girls were divided into obese, overweight and normal-weight groups, respectively. In boys, total impairment scores and scores on balance subtest in the MABC were significantly higher in the obese and overweight groups when compared against the normal-weight group. Girls in the obese and the overweight groups had higher balance impairment scores than those of the normal-weight group. Among boys, the prevalence of obesity was highest in the DCD group, when compared to the borderline DCD and TD boys. A higher percentage of DCD girls were overweight and obese than TD girls. Obesity may be associated with poor motor coordination ability among boys and girls, and particularly in relation to balance ability. Children with DCD may have a higher risk to be overweight or obese in Taiwan. Copyright © 2010 Elsevier Ltd. All rights reserved.

Technical Support for Contaminated Sites

EPA Science Inventory

In 1987, the U.S. Environmental Protection Agency’s (EPA) Office of Research and Development (ORD), Office of Land and Emergency Management, and EPA Regional waste management offices established the Technical Support Project. The creation of the Technical Support Project enabled...

EPA'S GROUND WATER TECHNICAL SUPPORT CENTER

EPA Science Inventory

The purpose and the services provided by EPA's Ground Water Technical Support Center (GWTSC) will be presented. In 1987 the Office of Solid Waste and Emergency Response, Regional Waste Management Offices, and ORD established the Technical Support Project (TSP)

The purpos...

7 CFR 652.35 - State Conservationist decision.

Code of Federal Regulations, 2010 CFR

2010-01-01

... technical service provider, the technical service provider will be given written notice of that... technical service provider's written response and supporting documentation. Both a copy of the decision and..., DEPARTMENT OF AGRICULTURE SUPPORT ACTIVITIES TECHNICAL SERVICE PROVIDER ASSISTANCE Decertification § 652.35...

Technical Support Document for Version 3.6.1 of the COMcheck Software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bartlett, Rosemarie; Connell, Linda M.; Gowri, Krishnan

2009-09-29

This technical support document (TSD) is designed to explain the technical basis for the COMcheck software as originally developed based on the ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989). Documentation for other national model codes and standards and specific state energy codes supported in COMcheck has been added to this report as appendices. These appendices are intended to provide technical documentation for features specific to the supported codes and for any changes made for state-specific codes that differ from the standard features that support compliance with the national model codes and standards.

Pyyromethene-BF2 Complexes as Laser Dyes

DTIC Science & Technology

1990-05-24

pyrromethene S1 state via exciplex formation, a pro- cess well known for polyamines [20], was not incompatible with the available information... exciplex formation [21]. Strong fluorescence in a bidentate BF 2 complex with nitrogen and/or oxygen atoms as ligand term’ini was afforded by P-BF2...M. Gordon and W. R. Ware, Eds., "The Exciplex ," Academic Press, New York, 1975. [21] M. E. Huston, K. W. Haider, and A. W. Czarnik, J. Amer. Chem. Soc

Oxide glass used as inorganic template for fluorescent fluoride nanoparticles synthesis

NASA Astrophysics Data System (ADS)

Mortier, Michel; Patriarche, Gilles

2006-09-01

We report an original way to synthesise single-crystal PbF 2 nanoparticles by selective chemical attack of a bulk nanocomposite oxyfluoride glass-ceramic. Free of impurities and homogeneously doped with Er 3+ ions, the particles are of narrow size dispersion around 15 nm and weakly aggregated. The nanocrystallites emit a very intense green and blue up conversion fluorescence after infrared excitation. The doping level and the size of the particles is finely driven through the precursor glass-ceramic synthesis and composition.

Growth of Ce+3 Doped Oxides by the Traveling Solvent Zone Technique.

DTIC Science & Technology

1983-06-01

ambient 1100 0.05 9 PbTiO3 PbF 2/PbO ambient 1075 0.05 9 In this program, we have evaluated several fluxes for growth of LaA10 3 , LaAll-xMxO3 (M = Sc+ 3...TABLE 2. X-RAY DIFFRACTIN PARAMETERS MEASURED FOR ARC FURNACE SYNTHESIZED LaAIO3 AND LaAl 0 .7Sc0 303 LaAIO3 LaAl 0 .7Sc .303 hkl d(A) d(A) 3.71 3.86

Ground Water Technical Support Center (GWTSC) Annual ...

EPA Pesticide Factsheets

The Ground Water Technical Support Center (GWTSC) is part of the Ground Water and Ecosystems Restoration Division (GWERD), which is based in the Robert S. Kerr Environmental Research Center in Ada, Oklahoma. The GWERD is a research division of U.S. EPA’s National Risk Management Research Laboratory (NRMRL). The GWTSC is one of an interlinked group of specialized Technical Support Centersthat were established under the Technical Support Project (TSP). The GWTSC provides technical support on issues related to groundwater. Specifically, the GWTSC provides technical support to U.S. EPA and State regulators for issues and problems related to:1. subsurface contamination (contaminants in ground water, soils and sediments),2. cross-media transfer (movement of contaminants from the subsurface to other media such as surface water or air), and3. restoration of impacted ecosystems.The GWTSC works with Remedial Project Managers (RPMs) and other decision makers to solve specific problems at Superfund, RCRA (Resource Conservation and Recovery Act), Brownfields sites, and ecosystem restoration sites. The Ground Water Technical Support Center (GWTSC) is part of the Ground Water and Ecosystems Restoration Division (GWERD), which is based in the Robert S. Kerr Environmental Research Center in Ada, Oklahoma. The GWERD is a research division of U.S. EPA’s National Risk Management Research Laboratory (NRMRL). The GWTSC is one of an interlinked group of specialized Technical Suppo

Analysis of stakeholders networks of infant and young child nutrition programmes in Sri Lanka, India, Nepal, Bangladesh and Pakistan.

PubMed

Uddin, Shahadat; Mahmood, Hana; Senarath, Upul; Zahiruddin, Quazi; Karn, Sumit; Rasheed, Sabrina; Dibley, Michael

2017-06-13

Effective public policies are needed to support appropriate infant and young child feeding (IYCF) to ensure adequate child growth and development, especially in low and middle income countries. The aim of this study was to: (i) capture stakeholder networks in relation to funding and technical support for IYCF policy across five countries in South Asia (i.e. Sri Lanka, India, Nepal, Bangladesh and Pakistan); and (ii) understand how stakeholder networks differed between countries, and identify common actors and their patterns in network engagement across the region. The Net-Map method, which is an interview-based mapping technique to visualise and capture connections among different stakeholders that collaborate towards achieving a focused goal, has been used to map funding and technical support networks in all study sites. Our study was conducted at the national level in Bangladesh, India, Nepal, and Sri Lanka, as well as in selected states or provinces in India and Pakistan during 2013-2014. We analysed the network data using a social network analysis software (NodeXL). The number of stakeholders identified as providing technical support was higher than the number of stakeholders providing funding support, across all study sites. India (New Delhi site - national level) site had the highest number of influential stakeholders for both funding (43) and technical support (86) activities. Among all nine study sites, India (New Delhi - national level) and Sri Lanka had the highest number of participating government stakeholders (22) in their respective funding networks. Sri Lanka also had the highest number of participating government stakeholders for technical support (34) among all the study sites. Government stakeholders are more engaged in technical support activities compared with their involvement in funding activities. The United Nations Children's Emergency Fund (UNICEF) and the World Health Organization (WHO) were highly engaged stakeholders for both funding and technical support activities across all study sites. International stakeholders were highly involved in both the funding and technical support activities related to IYCF practices across these nine study sites. Government stakeholders received more support for funding and technical support activities from other stakeholders compared with the support that they offered. Stakeholders were, in general, more engaged for technical support activities compared with the funding activities.

Identifying Effective Strategies to Providing Technical Support to One-to-One Programs

ERIC Educational Resources Information Center

Thomas, Mark W.

2013-01-01

The problem of this study was that while one-to-one initiatives in the K-12 environment are growing, the technical support personnel that work in these environments are experiencing problems supporting these initiatives. The purposes of this study were to: (a) identify common problems of providing technical support in a one-to-one laptop program,…

75 FR 19297 - Energy Conservation Program: Public Meeting and Availability of the Preliminary Technical Support...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-14

... Conservation Program: Public Meeting and Availability of the Preliminary Technical Support Document for Walk-In... and availability of the preliminary technical support document regarding energy conservation standards..., the deadline for requesting to speak at the public meeting, and the deadline for submitting written...

40 CFR Appendix A to Part 67 - Technical Support Document

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 15 2010-07-01 2010-07-01 false Technical Support Document A Appendix A to Part 67 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS...—Technical Support Document Note: EPA will make copies of appendix A available from: Director, Stationary...

40 CFR Appendix A to Part 66 - Technical Support Document

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 15 2010-07-01 2010-07-01 false Technical Support Document A Appendix A to Part 66 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS...—Technical Support Document Note: For text of appendix A see appendix A to part 67. ...

40 CFR 412.31 - Effluent limitations attainable by the application of the best practicable control technology...

Code of Federal Regulations, 2010 CFR

2010-07-01

... supporting technical analysis and any other relevant information and data that would support such site... event. The technical analysis of the discharge of pollutants must include: (A) All daily inputs to the... the supporting technical analysis, including inspection of the CAFO. (3) The CAFO shall attain the...

40 CFR 412.31 - Effluent limitations attainable by the application of the best practicable control technology...

Code of Federal Regulations, 2011 CFR

2011-07-01

... supporting technical analysis and any other relevant information and data that would support such site... event. The technical analysis of the discharge of pollutants must include: (A) All daily inputs to the... the supporting technical analysis, including inspection of the CAFO. (3) The CAFO shall attain the...

Engineering Technical Support Center Annual Report Fiscal ...

EPA Pesticide Factsheets

The United States Environmental Protection Agency (EPA or Agency) Office of Research and Development (ORD) created the Engineering Technical Support Center (ETSC) in 1987, one of several technical support centers created as part of the Technical Support Project (TSP). ETSC provides engineering expertise to Agency program and regional offices and remediation teams working at contaminated sites across the country. The ETSC is operated within ORD’s Land Remediation and Pollution Control Division (LRPCD) of the National Risk Management Research Laboratory (NRMRL) in Cincinnati, Ohio. The ETSC’s mission is to provide site-specific scientific and engineering technical support to Remedial Project Managers, On-Scene Coordinators, and other remediation personnel at contaminated sites. This allows local, regional, or national authorities to work more quickly, efficiently, and cost effectively, while also increasing the technical experience of the remediation team. Since its inception, the ETSC has supported countless projects across all EPA Regions in almost all states and territories. This report highlights significant projects the ETSC supported in fiscal year 2015 (FY15). These projects addressed an array of environmental scenarios, such as remote mining contamination, expansive landfill waste, cumulative impacts from multiple contamination sources, and persistent threats from abandoned industrial sites. Constructing and testing new and innovative treatment technol

Supervised filters for EEG signal in naturally occurring epilepsy forecasting.

PubMed

Muñoz-Almaraz, Francisco Javier; Zamora-Martínez, Francisco; Botella-Rocamora, Paloma; Pardo, Juan

2017-01-01

Nearly 1% of the global population has Epilepsy. Forecasting epileptic seizures with an acceptable confidence level, could improve the disease treatment and thus the lifestyle of the people who suffer it. To do that the electroencephalogram (EEG) signal is usually studied through spectral power band filtering, but this paper proposes an alternative novel method of preprocessing the EEG signal based on supervised filters. Such filters have been employed in a machine learning algorithm, such as the K-Nearest Neighbor (KNN), to improve the prediction of seizures. The proposed solution extends with this novel approach an algorithm that was submitted to win the third prize of an international Data Science challenge promoted by Kaggle contest platform and the American Epilepsy Society, the Epilepsy Foundation, National Institutes of Health (NIH) and Mayo Clinic. A formal description of these preprocessing methods is presented and a detailed analysis in terms of Receiver Operating Characteristics (ROC) curve and Area Under ROC curve is performed. The obtained results show statistical significant improvements when compared with the spectral power band filtering (PBF) typical baseline. A trend between performance and the dataset size is observed, suggesting that the supervised filters bring better information, compared to the conventional PBF filters, as the dataset grows in terms of monitored variables (sensors) and time length. The paper demonstrates a better accuracy in forecasting when new filters are employed and its main contribution is in the field of machine learning algorithms to develop more accurate predictive systems.

Supervised filters for EEG signal in naturally occurring epilepsy forecasting

PubMed Central

2017-01-01

Nearly 1% of the global population has Epilepsy. Forecasting epileptic seizures with an acceptable confidence level, could improve the disease treatment and thus the lifestyle of the people who suffer it. To do that the electroencephalogram (EEG) signal is usually studied through spectral power band filtering, but this paper proposes an alternative novel method of preprocessing the EEG signal based on supervised filters. Such filters have been employed in a machine learning algorithm, such as the K-Nearest Neighbor (KNN), to improve the prediction of seizures. The proposed solution extends with this novel approach an algorithm that was submitted to win the third prize of an international Data Science challenge promoted by Kaggle contest platform and the American Epilepsy Society, the Epilepsy Foundation, National Institutes of Health (NIH) and Mayo Clinic. A formal description of these preprocessing methods is presented and a detailed analysis in terms of Receiver Operating Characteristics (ROC) curve and Area Under ROC curve is performed. The obtained results show statistical significant improvements when compared with the spectral power band filtering (PBF) typical baseline. A trend between performance and the dataset size is observed, suggesting that the supervised filters bring better information, compared to the conventional PBF filters, as the dataset grows in terms of monitored variables (sensors) and time length. The paper demonstrates a better accuracy in forecasting when new filters are employed and its main contribution is in the field of machine learning algorithms to develop more accurate predictive systems. PMID:28632737

PM trend study for the 1998 - 2012 period: Impact of Transport and Petroleum-based Fuels in Santiago Chile

NASA Astrophysics Data System (ADS)

Castillo, M. A.; Jhun, I.; Moreno, F.; Oyola, P.; Koutrakis, P.

2013-05-01

Santiago is the capital city of Chile and the combination of adverse climatic and geographical conditions, a continuously growing vehicle fleet, and an increasing number of industries, has made Santiago one of the most polluted cities in South America, and has been declared saturated zone for PM10 since 1996. Although there have been important reductions in the PM emissions due the implementation of the "Atmospheric Prevention and Decontamination Plan for the Metropolitan Region" (PPDA) however the efforts have not been enough to meet the actual standards. Currently is approved a standard for PM2.5, where the annual average is 20 μg/m3 and daily average 24 hr is 50 μg/m3. One of the PM2.5 sources are the traffic emission and one of the measures targeted in PPDA has been to regulate this source. In the last 20 years two of the main interventions have been the elimination of Lead in gasoline (2001) and the steadily reduced diesel sulfur content from 5,000 to 50 ppm. In this study we analyzed 14 years of PM2.5 mass and species concentration time's series, from April 1998 to August 2012, elemental chemical analysis was made for approximately 60% of samples using XRF technique at DRI Lab (USA). One of the objectives is evaluate the impact of fuel-related interventions and petroleum-based fuels (PBFs) sales. When was analyzed de lead concentration we found that is present in the environment despite of that was eliminated of gasoline 20 years ago. We analyzed the impact of diesel sulfur on ambient sulfur content, and was constructed a model to verify the relationship between ambient sulfur and diesel sulfur content after controlling for other covariates. The relation between ambient concentration and diesel content sulfur is linear, when the reduction of sulfur in diesel was from 1500 to 50 ppm the concentration decreased from 1.59 to 1.08 μg/m3. To determinate the impact of PBFs sales (gasoline, kerosene, petroleum) on PM2.5 concentration, we estimated PM2.5 regression model for PBF sales. In PM2.5 trend was observed an increase in 2005-2008 period ; when the PBF sales were included in the regression model, the concentration of PM2.5 was mitigated (2005-2008), this results indicates that if the PBF sales not had risen in this period the concentration of PM2.5 would not have increased as much.

The CHPRC Groundwater and Technical Integration Support (Master Project) Quality Assurance Management Plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fix, N. J.

The scope of the CH2M Hill Plateau Remediation Company, LLC (CHPRC) Groundwater and Technical Integration Support (Master Project) is for Pacific Northwest National Laboratory staff to provide technical and integration support to CHPRC. This work includes conducting investigations at the 300-FF-5 Operable Unit and other groundwater operable units, and providing strategic integration, technical integration and assessments, remediation decision support, and science and technology. The projects under this Master Project will be defined and included within the Master Project throughout the fiscal year, and will be incorporated into the Master Project Plan. This Quality Assurance Management Plan provides the quality assurancemore » requirements and processes that will be followed by the CHPRC Groundwater and Technical Integration Support (Master Project) and all releases associated with the CHPRC Soil and Groundwater Remediation Project. The plan is designed to be used exclusively by project staff.« less

Engineering Technical Support Center (ETSC)

EPA Pesticide Factsheets

ETSC is EPA’s technical support and resource centers responsible for providing specialized scientific and engineering support to decision-makers in the Agency’s ten regional offices, states, communities, and local businesses.

U.S. ENVIRONMENTAL PROTECTION AGENCY RESEARCH AND TECHNICAL SUPPORT NEEDS RELATED TO CONCEPTUAL MODEL DEVELOPMENT FOR SUBSURFACE REACTIVE TRANSPORT MODELING OF INORGANIC CONTAMINANTS, RADIONUCLIDES, AND NUTRIENTS

EPA Science Inventory

EPA's Office of Research and Development is responsible to EPA's Office of Solid Waste to provide research and technical support for waste site closures and the development of technical guidance in support of environmental regulations and programmatic policies. ORD is also respo...

Luminescent hybrid materials based on (8-hydroxyquinoline)-substituted metal-organic complexes and lead-borate glasses

NASA Astrophysics Data System (ADS)

Petrova, Olga B.; Anurova, Maria O.; Akkuzina, Alina A.; Saifutyarov, Rasim R.; Ermolaeva, Ekaterina V.; Avetisov, Roman I.; Khomyakov, Andrew V.; Taydakov, Ilya V.; Avetissov, Igor Ch.

2017-07-01

Novel luminescent organic-inorganic hybrid materials based on 8-hydroxyquinoline metal complexes (Liq, Kq, Naq, Rbq, Mgq2, Srq2, Znq2, Scq3, Alq3, Gaq3, and Inq3) have been synthesized by a high temperature exchange reaction with 80PbF2-20B2O3 inorganic low-melting glass. The mechanical and optical properties, transmission spectra, emission an excitation photoluminescence, and luminescence kinetic of hybrid materials were studied. All hybrid materials showed a wide luminescence band in the range 400-700 nm.

Comparison of Insect Kinin Analogs With cis-Peptide Bond Motif 4-Aminopyroglutamate Identifies Optimal Stereochemistry for Diuretic Activity

DTIC Science & Technology

2006-01-01

Amino acid side-chain-protecting groups were Pbf for Arg and Boc for Trp. The coupling of Fmoc-4-amino- pyroglutamic acids (Fmoc-aPy-OH, Fmoc-apy-OH...Inc. Biopolymers (Pept Sci) 88:1–7, 2007. Keywords: 4-aminopyroglutamic acid ; cis-peptide bond; b-turn mimetic; constrained insect kinin analog...analogs containing three stereochemical var- iants of the (2S, 4S)-4-aminopyroglutamic acid (APy) com- ponent (see Figure 1), a mimic of the cis-peptide

Technical Assistance and Program Support; DOD Historical Black Colleges and Universities and Minority Institutions Program.

DTIC Science & Technology

2000-04-01

AD Award Number: DAMD17-98-2-8012 TITLE: Technical Assistance and Program Support; DOD Historical Black Colleges and Universities and Minority...2000 3. REPORT TYPE AND DATES COVERED Annual (1 May 99 - 30 Apr 00): 4. TITLE AND SUBTITLE Technical Assistance and Program Support; DOD...UNCF’s Infrastructure Development Assistance Program (IDAP) has been involved myriad of tasks to support the Department of Defense’s interest to

77 FR 40026 - 36(b)(1) Arms Sales Notification

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-06

... and contractor logistics, Quality Assurance Team support services, engineering and technical support..., engineering and technical support, and other related elements of program support. The estimated cost is $49..., maintenance, or training is Confidential. Reverse engineering could reveal Confidential information...

48 CFR 2052.215-75 - Proposal presentation and format.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., i.e., competitive vs. noncompetitive, and the cost evaluation. (c) “Written Technical and Management... * copies. (1) The written Technical and Management Proposal or Oral Presentation and Supporting... objectives of this procurement. (3) The written Technical Proposal or Oral Presentation and Supporting...

The power of a collaborative relationship between technical assistance providers and community prevention teams: A correlational and longitudinal study

PubMed Central

Chilenski, Sarah M.; Perkins, Daniel F.; Olson, Jonathan; Hoffman, Lesa; Feinberg, Mark E.; Greenberg, Mark; Welsh, Janet; Crowley, D. Max; Spoth, Richard

2015-01-01

Background Historically, effectiveness of community collaborative prevention efforts has been mixed. Consequently, research has been undertaken to better understand the factors that support their effectiveness; theory and some related empirical research suggests that the provision of technical assistance is one important supporting factor. The current study examines one aspect of technical assistance that may be important in supporting coalition effectiveness, the collaborative relationship between the technical assistance provider and site lead implementer. Methods Four and one-half years of data were collected from technical assistance providers and prevention team members from the 14 community prevention teams involved in the PROSPER project. Results Spearman correlation analyses with longitudinal data show that the levels of the collaborative relationship during one phase of collaborative team functioning associated with characteristics of internal team functioning in future phases. Conclusions Results suggest that community collaborative prevention work should consider the collaborative nature of the technical assistance provider – prevention community team relationship when designing and conducting technical assistance activities, and it may be important to continually assess these dynamics to support high quality implementation. PMID:26476860

2005 v4.2 Technical Support Document

EPA Pesticide Factsheets

Technical Support Document for the Final Transport Rule describes how updated 2005 NEI, version 2 emissions and were processed for air quality modeling in support of the Cross-state Air Pollution Rule (CSAPR).

Organizational Structures and Processes to Support and Sustain Effective Technical Assistance in a State-Wide Multi-Tiered System of Support Initiative

ERIC Educational Resources Information Center

Morrison, Julie Q.; Russell, Christine; Dyer, Stephanie; Metcalf, Terri; Rahschulte, Rebecca L.

2014-01-01

Despite the national proliferation of technical assistance as a driver for school reform and as a model for embedded and sustained professional development, very little is known about the organizational structures and processes needed to support technical assistance. The purpose of this paper is to describe a structured needs assessment process…

Minnesota Deaf-Blind Technical Assistance Project. Final Report.

ERIC Educational Resources Information Center

Kloos, Eric

This final report describes activities and accomplishments of the 3-year federally supported Minnesota Deaf-Blind Technical Assistance Project. The project provided training and technical assistance, information sharing, and support services to families of children with deaf-blindness. Activities and accomplishments included: collaboration with…

76 FR 69612 - Amendment to the International Traffic in Arms Regulations: Sudan

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-09

... related technical training and assistance to monitoring, verification, or peace support operations... uses, and related technical training and assistance; (3) personal protective gear for the personal use... technical training and assistance to monitoring, verification, or peace support operations, including those...

75 FR 12740 - Wyoming Interstate Company, Inc.; Notice of Technical Conference

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-17

... additional technical, engineering, and operational support for its proposed gas quality allocation procedures... should be prepared to support its position with adequate technical, engineering, and operational information. FERC conferences are accessible under section 508 of the Rehabilitation Act of 1973. For...

The Role of the Technical Specialist in Disaster Response and Recovery

NASA Astrophysics Data System (ADS)

Curtis, J. C.

2017-12-01

Technical Specialists provide scientific expertise for making operational decisions during natural hazards emergencies. Technical Specialists are important members of any Incident Management Team (IMT) as is described in in the National Incident Management System (NIMS) that has been designed to respond to emergencies. Safety for the responders and the threatened population is the foremost consideration in command decisions and objectives, and the Technical Specialist is on scene and in the command post to support and promote safety while aiding decisions for incident objectives. The Technical Specialist's expertise can also support plans, logistics, and even finance as well as operations. This presentation will provide actual examples of the value of on-scene Technical Specialists, using National Weather Service "Decision Support Meteorologists" and "Incident Meteorologists". These examples will demonstrate the critical role of scientists that are trained in advising and presenting life-critical analysis and forecasts during emergencies. A case will be made for local, state, and/or a national registry of trained and deployment-ready scientists that can support emergency response.

Scaffolding Collaborative Technical Writing with Procedural Facilitation and Synchronous Discussion

ERIC Educational Resources Information Center

Yeh, Shiou-Wen; Lo, Jia-Jiunn; Huang, Jeng-Jia

2011-01-01

With the advent of computer technology, researchers and instructors are attempting to devise computer support for effective collaborative technical writing. In this study, a computer-supported environment for collaborative technical writing was developed. This system (Process-Writing Wizard) provides process-oriented scaffolds and a synchronous…

USACE AIS Transmit Technical Support Summary Report

DTIC Science & Technology

2014-09-01

the TAG block for the correct transmitters, and then send to the USACE AIS network. B. Outbound openings in the USCG firewall for the USCG Message...USACE AIS Transmit Technical Support Summary Report Distribution Statement A: Approved for public release; distribution is unlimited...September 2014 Report No. CD-D-09-15 USACE AIS Transmit Technical Support Summary Report ii UNCLAS//Public | CG-926 RDC | I. Gonin et al. Public

Transforming South-South technical support to fight noncommunicable diseases.

PubMed

Shakow, Aaron D A; Bukhman, Gene; Adebona, Olumuyiwa; Greene, Jeremy; de Dieu Ngirabega, Jean; Binagwaho, Agnès

2012-03-01

At the UN High-Level Meeting on non-communicable diseases (NCD) in September 2011, each member state was challenged to create a multisectoral national policy and plan for the prevention and control of non-communicable disease by 2013. Few low-income countries, however, currently have such plans. Their governments are likely to turn for assistance in drafting and implementation to multilateral agencies and Contract Technical Support Organizations recommended by development partners. Yet because many NCD seen in the lowest-income countries differ significantly from those prevalent elsewhere, existing providers of external technical support may lack the necessary experience to support strategic planning for NCD interventions in these settings. This article reviews currently available mechanisms of technical support for health sector planning. It places them in the broader historical context of post- World War II international development assistance and the more recent campaigns for horizontal "South-South" cooperation and aid effectiveness. It proposes bilateral technical assistance by low income-countries themselves as the natural evolution of development assistance in health. Such programs, it argues, may be able to improve the quality of technical support to low-income countries for strategic planning in the NCD area while directing resources to the regions where they are most needed. Copyright © 2012 World Heart Federation (Geneva). Published by Elsevier B.V. All rights reserved.

A Theory of Sex Differences in Technical Aptitude and Some Supporting Evidence.

PubMed

Schmidt, Frank L

2011-11-01

In this article, I present a theory that explains the origin of sex differences in technical aptitudes. The theory takes as proven that there are no sex differences in general mental ability (GMA), and it postulates that sex differences in technical aptitude (TA) stem from differences in experience in technical areas, which is in turn based on sex differences in technical interests. Using a large data set, I tested and found support for four predictions made by this theory: (a) the construct level correlation between technical aptitude and GMA is larger for females than males, (b) the observed and true score variability of technical aptitude is greater among males than females, (c) at every level of GMA females have lower levels of technical aptitude, and (d) technical aptitude measures used as estimates of GMA for decision purposes would result in underestimation of GMA levels for girls and women. Given that GMA carries the weight of prediction of job performance, the support found for this last prediction suggests that, for many jobs, technical aptitude tests may underpredict the job performance of female applicants and employees. Future research should examine this question. © Association for Psychological Science 2011.

GROUND WATER TECHNICAL SUPPORT CENTER

EPA Science Inventory

EPA's Office of Research and Development operates a Ground Water Technical Support Center (GWTSC). The Center provides support on issues regarding subsurface contamination, contaminant fluxes to other media (e.g., surface water or air), and ecosystem restoration. The GWTSC creat...

2005 v4.3 Technical Support Document

EPA Pesticide Factsheets

Emissions Modeling for the Final Mercury and Air Toxics Standards Technical Support Document describes how updated 2005 NEI, version 2 emissions were processed for air quality modeling in support of the final Mercury and Air Toxics Standards (MATS).

Blockade of renal medullary bradykinin B2 receptors increases tubular sodium reabsorption in rats fed a normal-salt diet

PubMed Central

Sivritas, Sema-Hayriye; Ploth, David W.; Fitzgibbon, Wayne R.

2008-01-01

The present study was performed to test the hypothesis that under normal physiological conditions and/or during augmentation of kinin levels, intrarenal kinins act on medullary bradykinin B2 (BKB2) receptors to acutely increase papillary blood flow (PBF) and therefore Na+ excretion. We determined the effect of acute inner medullary interstitial (IMI) BKB2 receptor blockade on renal hemodynamics and excretory function in rats fed either a normal (0.23%)- or a low (0.08%)-NaCl diet. For each NaCl diet, two groups of rats were studied. Baseline renal hemodynamic and excretory function were determined during IMI infusion of 0.9% NaCl into the left kidney. The infusion was then either changed to HOE-140 (100 μg·kg−1·h−1, treated group) or maintained with 0.9% NaCl (time control group), and the parameters were again determined. In rats fed a normal-salt diet, HOE-140 infusion decreased left kidney Na+ excretion (urinary Na+ extraction rate) and fractional Na+ excretion by 40 ± 5% and 40 ± 4%, respectively (P < 0.01), but did not alter glomerular filtration rate, inner medullary blood flow (PBF), or cortical blood flow. In rats fed a low-salt diet, HOE-140 infusion did not alter renal regional hemodynamics or excretory function. We conclude that in rats fed a normal-salt diet, kinins act tonically via medullary BKB2 receptors to increase Na+ excretion independent of changes in inner medullary blood flow. PMID:18632797

The Effect of Aerobic or Aerobic-Strength Exercise on Body Composition and Functional Capacity in Patients with BMI ≥35 after Bariatric Surgery: a Randomized Control Trial.

PubMed

Hassannejad, Alireza; Khalaj, Alireza; Mansournia, Mohammad Ali; Rajabian Tabesh, Mastaneh; Alizadeh, Zahra

2017-11-01

Although previous studies suggested that bariatric surgery is the most effective and sustainable treatment method for morbid obesity in long term, but without changing in lifestyle, maintaining optimal weight loss is almost impossible. Sixty morbid obese patients (BMI ≥ 35) were evaluated before and after 12 weeks of bariatric surgery in order to compare the impact of two different exercise programs on body composition and functional capacity outcomes. Participants were divided into three groups: aerobic (A), aerobic-strength (AS), and control (C) group. Aerobic capacity was assessed with 12-min walk-run test (12MWRT). One-repetition maximum (1RM) test was performed to evaluation upper limb muscle strength. Lower extremity functional capacity was assessed by sit-to-stand test. Weight, percent body fat (PBF), and fat mass (FM) reduced greater in the trial groups in comparison to the C group (P < 0.05). In the AS group, the reduction of fat-free mass (FFM) was significantly lower than that in the other groups. Mean changes in 12MWRT increased significantly in the intervention groups. The mean change in the sit-to-stand scores was not statistically significant between the three groups. Comparing the intervention groups showed that mean changes in 1RM variables increased in AS group (P = 0.03). The data suggests a positive effect of exercise on weight and PBF decrease after surgery, and it leads to significant improvement on aerobic capacity. Moreover, doing resisted exercise caused greater preserving of lean mass.

Heterogeneity of pulmonary perfusion as a mechanistic image-based phenotype in emphysema susceptible smokers.

PubMed

Alford, Sara K; van Beek, Edwin J R; McLennan, Geoffrey; Hoffman, Eric A

2010-04-20

Recent evidence suggests that endothelial dysfunction and pathology of pulmonary vascular responses may serve as a precursor to smoking-associated emphysema. Although it is known that emphysematous destruction leads to vasculature changes, less is known about early regional vascular dysfunction which may contribute to and precede emphysematous changes. We sought to test the hypothesis, via multidetector row CT (MDCT) perfusion imaging, that smokers showing early signs of emphysema susceptibility have a greater heterogeneity in regional perfusion parameters than emphysema-free smokers and persons who had never smoked (NS). Assuming that all smokers have a consistent inflammatory response, increased perfusion heterogeneity in emphysema-susceptible smokers would be consistent with the notion that these subjects may have the inability to block hypoxic vasoconstriction in patchy, small regions of inflammation. Dynamic ECG-gated MDCT perfusion scans with a central bolus injection of contrast were acquired in 17 NS, 12 smokers with normal CT imaging studies (SNI), and 12 smokers with subtle CT findings of centrilobular emphysema (SCE). All subjects had normal spirometry. Quantitative image analysis determined regional perfusion parameters, pulmonary blood flow (PBF), and mean transit time (MTT). Mean and coefficient of variation were calculated, and statistical differences were assessed with one-way ANOVA. MDCT-based MTT and PBF measurements demonstrate globally increased heterogeneity in SCE subjects compared with NS and SNI subjects but demonstrate similarity between NS and SNI subjects. These findings demonstrate a functional lung-imaging measure that provides a more mechanistically oriented phenotype that differentiates smokers with and without evidence of emphysema susceptibility.

Differentiated Technical Assistance for Sustainable Transformation. Technical Assistance Brief #2

ERIC Educational Resources Information Center

McCart, Amy; McSheehan, Michael; Sailor, Wayne

2015-01-01

Schoolwide Integrated Framework for Transformation (SWIFT) Center's technical assistance process supports states, districts, and schools as they become excellent and equitable teaching and learning environments for "all" students. Each school with support from its district begins this process from its own starting point and travels its…

31 CFR 543.301 - Arms or any related materiel.

Code of Federal Regulations, 2010 CFR

2010-07-01

... solely for humanitarian or protective use, and related technical assistance and training; (c) Supplies of... of arms and related materiel and technical training and assistance intended solely for support of or... technical assistance intended solely for the support of or use by the United Nations Operation in Côte d...

31 CFR 547.301 - Arms or any related materiel.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) Supplies of arms and related materiel, technical training, and assistance intended solely for support of or... of arms and related materiel, technical training, and assistance described in paragraphs (a)(1... technical training and assistance intended solely for support of or use by MONUC; (c) Supplies of non-lethal...

Air Quality Modeling Technical Support Document for the Final Cross State Air Pollution Rule Update

EPA Pesticide Factsheets

In this technical support document (TSD) we describe the air quality modeling performed to support the final Cross State Air Pollution Rule for the 2008 ozone National Ambient Air Quality Standards (NAAQS).

78 FR 30233 - Defense Federal Acquisition Regulation Supplement; Government Support Contractor Access to...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-22

... Number 0750-AG38 Defense Federal Acquisition Regulation Supplement; Government Support Contractor Access... Government support contractors to have access to proprietary technical data belonging to prime contractors and other third parties, provided that the technical data owner may require the support contractor to...

The power of a collaborative relationship between technical assistance providers and community prevention teams: A correlational and longitudinal study.

PubMed

Chilenski, Sarah M; Perkins, Daniel F; Olson, Jonathan; Hoffman, Lesa; Feinberg, Mark E; Greenberg, Mark; Welsh, Janet; Crowley, D Max; Spoth, Richard

2016-02-01

Historically, effectiveness of community collaborative prevention efforts has been mixed. Consequently, research has been undertaken to better understand the factors that support their effectiveness; theory and some related empirical research suggests that the provision of technical assistance is one important supporting factor. The current study examines one aspect of technical assistance that may be important in supporting coalition effectiveness, the collaborative relationship between the technical assistance provider and site lead implementer. Four and one-half years of data were collected from technical assistance providers and prevention team members from the 14 community prevention teams involved in the PROSPER project. Spearman correlation analyses with longitudinal data show that the levels of the collaborative relationship during one phase of collaborative team functioning associated with characteristics of internal team functioning in future phases. Results suggest that community collaborative prevention work should consider the collaborative nature of the technical assistance provider - prevention community team relationship when designing and conducting technical assistance activities, and it may be important to continually assess these dynamics to support high quality implementation. Copyright © 2015 Elsevier Ltd. All rights reserved.

ERLN Technical Support for Labs

EPA Pesticide Factsheets

The Environmental Response Laboratory Network provides policies and guidance on lab and data requirements, Standardized Analytical Methods, and technical support for water and radiological sampling and analysis

Air Quality Modeling Technical Support Document for the 2008 Ozone NAAQS Cross-State Air Pollution Rule Proposal

EPA Pesticide Factsheets

In this technical support document (TSD) we describe the air quality modeling performed to support the proposed Cross-State Air Pollution Rule for the 2008 ozone National Ambient Air Quality Standards (NAAQS)

Air Quality Modeling Technical Support Document for the 2015 Ozone NAAQS Preliminary Interstate Transport Assessment

EPA Pesticide Factsheets

In this technical support document (TSD) EPA describes the air quality modeling performed to support the 2015 ozone National Ambient Air Quality Standards (NAAQS) preliminary interstate transport assessment Notice of Data Availability (NODA).

78 FR 45869 - Approval and Promulgation of State Implementation Plans; State of Montana; Interstate Transport...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-30

... of Montana's submission because the submission did not include any technical analysis to support its..., EPA disagrees with that concern. Our technical analysis confirmed that emissions from Montana in total... irrelevant factors and lacks any technical analysis to support the State's conclusion with respect to...

76 FR 14835 - Approval and Promulgation of Air Quality Implementation Plan; Missouri; Proposed Disapproval of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-18

... the state's conclusion should be supported by an adequate technical analysis. EPA recommended the...)(2)(D)(i)(I) must be supported by an adequate technical analysis.\\5\\ EPA recommended the various..., the state did not further evaluate or demonstrate with a technical analysis that these measures...

76 FR 43167 - Approval and Promulgation of Air Quality Implementation Plan; North Carolina; Disapproval of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-20

... stated that the state's conclusion should be supported by an adequate technical analysis. Second, EPA... revision must be supported by an adequate technical analysis, including, but not limited to, information... disapproval where the Agency states: ``* * * without an adequate technical analysis EPA does not believe that...

76 FR 14831 - Approval and Promulgation of Air Quality Implementation Plan; Kansas; Proposed Disapproval of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-18

... State's conclusion should be supported by an adequate technical analysis. EPA recommended the various...) must be supported by an adequate technical analysis.\\5\\ EPA recommended the various types of... evaluate or demonstrate with a technical analysis that these measures address the requirements of 110(a)(2...

76 FR 43159 - Approval and Promulgation of Air Quality Implementation Plan; Georgia; Disapproval of Interstate...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-20

... stated that the state's conclusion should be supported by an adequate technical analysis. Second, EPA...'' provisions, the state's SIP revision must be supported by an adequate technical analysis, including, but not..., proposed disapproval where the Agency states: ``* * * without an adequate technical analysis EPA does not...

76 FR 43128 - Approval and Promulgation of Air Quality Implementation Plan; Alabama; Disapproval of Interstate...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-20

..., if so, address the impact. The state's conclusion must be supported by an adequate technical analysis...'' provisions, the state's SIP revision must be supported by an adequate technical analysis, including, but not... disapproval where the Agency states: ``* * *without an adequate technical analysis EPA does not believe that...

Design Study for Project on Standard Operating Procedures for Technical Library Services.

ERIC Educational Resources Information Center

Libbey, Miles A.; And Others

The overall objective of the Technical Information Support Activities (TISA) Project is the production of a "Post Commander's Handbook." The handbook will be instrumental in achieving greater utilization of available technical information resources to assist army scientists and engineers engaged in the support of army combat and other…

Computer Supported Education at Fox Valley Technical Institute. IBM Application Brief.

ERIC Educational Resources Information Center

International Business Machines Corp., White Plains, NY.

Fox Valley Technical Institute (FVTI) has developed an approach to education which emphasizes competency-based, round-the-clock education entailing short terms, flexible class schedules, and individualized instruction and which has as its focus strong computer support at classroom, technical, and management levels. The college provides 6,000…

Testing Services

NASA Technical Reports Server (NTRS)

1993-01-01

Trace Laboratories is an independent testing laboratory specializing in testing printed circuit boards, automotive products and military hardware. Technical information from NASA Tech Briefs and two subsequent JPL Technical Support packages have assisted Trace in testing surface insulation resistance on printed circuit board materials. Testing time was reduced and customer service was improved because of Jet Propulsion Laboratory technical support packages.

78 FR 78939 - 36(b)(1) Arms Sales Notification

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-27

... Quantity or Quantities of Articles or Services under Consideration for Purchase: C-130J technical, engineering and software support; software updates and patches; familiarization training for Portable Flight... and contractor technical support services; and other related elements of logistics and program support...

Computer-Based Methods for Thermodynamic Analysis of Materials Processing.

DTIC Science & Technology

1983-11-30

metallic alloys (12,13), silicides (14),and oxynitride * . systems (15). - . 2. Thermochemical System Employed to Characterize Binary Ill-V Phase Diagrams The...reference to Figure I shows that the stable form of RbF is the sodium chloride S form. Table I shows that OGH -oS -RFRFLS-RFRFLM-12866-.381T J/g.at. (5...KF, BF=(I/3)8aF LF-(I/4)LaF3V PF-(113)PbF 2 S- Sodium Chloride Structures Stable form of NF, KE, RE and (;F L-Liquid, M-Stable form of ZF, KeStable form

Distal Insertions of the Biceps Femoris

PubMed Central

Branch, Eric A.; Anz, Adam W.

2015-01-01

Background: Avulsion of the biceps femoris from the fibula and proximal tibia is encountered in clinical practice. While the anatomy of the primary posterolateral corner structures has been qualitatively and quantitatively described, a quantitative analysis regarding the insertions of the biceps femoris on the fibula and proximal tibia is lacking. Purpose: To quantitatively assess the insertions of the biceps femoris, fibular collateral ligament (FCL), and anterolateral ligament (ALL) on the fibula and proximal tibia as well as establish relationships among these structures and to pertinent surgical anatomy. Study Design: Descriptive laboratory study. Methods: Dissections were performed on 12 nonpaired, fresh-frozen cadaveric specimens identifying the biceps femoris, FCL, and ALL, and their insertions on the proximal tibia and fibula. The footprint areas, orientations, and distances from relevant osseous landmarks were measured using a 3-dimensional coordinate measurement device. Results: Dissection produced 6 easily identifiable and reproducible anatomic footprints. Tibial footprints included the insertion of the ALL and an insertion of the biceps femoris (TBF). Fibular footprints included the insertion of the FCL, a distal insertion of the biceps femoris (DBF), a medial footprint of the biceps femoris (MBF), and a proximal footprint of the biceps femoris (PBF). The mean area of these footprints (95% CI) was as follows: ALL, 53.0 mm2 (38.4-67.6); TBF, 93.9 mm2 (72.0-115.8); FCL, 86.8 mm2 (72.3-101.2); DBF, 119 mm2 (91.1-146.9); MBF, 46.8 mm2 (29.0-64.5); and PBF, 215 mm2 (192.4-237.5). The mean distance (95% CI) from the Gerdy tubercle to the center of the ALL footprint was 24.3 mm (21.6-27.0) and to the center of the TBF was 22.5 mm (21.0-24.0). The center of the DBF was 8.68 mm (7.0-10.3) from the anterior border of the fibula, the center of the FCL was 14.6 mm (12.5-16.7) from the anterior border of the fibula and 20.7 mm (19.0-22.4) from the tip of the fibular styloid, and the center of the PBF was 8.96 mm (8.2-9.7) from the tip of the fibular styloid. Conclusion: A tibial footprint, distal fibular footprint, medial fibular footprint, and proximal fibular footprint were all consistent components of the insertion of the biceps femoris. Consistent relationships existed between the biceps femoris and insertions of the ALL and FCL. Clinical Relevance: The size of these footprints and distances from pertinent surgical landmarks will guide repairs of biceps femoris avulsion injuries. PMID:26535398

Arterial-to-end-tidal carbon dioxide tension difference in children with congenital heart disease.

PubMed

Choudhury, Minati; Kiran, Usha; Choudhary, Shiv Kumar; Airan, Balram

2006-04-01

This study estimated the arterial-to-end-tidal carbon dioxide tension difference (deltaPaCO2-PE'CO2) in children with congenital heart disease; evaluated whether hyperventilation can reduce this difference; and analyzed the relationship between the difference and the oxygen saturation (SaO2) and hemoglobin level. Prospective clinical study. Tertiary health care center. One hundred patients scheduled for correction of their underlying cardiac defect with either right-to-left or left-to-right intracardiac shunts were divided into 4 groups (n = 25 each): (1) N1, cyanotic with severe pulmonary artery hypertension; (2) N2, cyanotic with normal or decreased pulmonary artery pressure (PAP); (3) N3, acyanotic with normal or mild increases in PAP and severe increases in pulmonary blood flow (PBF); and (4) N4, acyanotic with normal PAP and normal or mild increase in PBF. All the patients received the same anesthetic regimen. The initial settings for tidal volume, respiratory rate, and inspiratory-to-expiratory (I:E) ratio were 10 mL/kg, 15 to 30 breath/min, and inspired time 40% of the total respiratory period with a 10% end-inspiratory pause. After the measurement of oxygen saturation, PO2, Hb, and deltaPaCO2-PE'CO2, all the children were hyperventilated (tidal volume: 14-15 mL/kg, respiratory rate: 5-6 breaths/min more than the initial rate, I:E ratio: same) to observe its effects on the deltaPaCO2-PE'CO2. The deltaPaCO2-PE'CO2, when predicted from the oxygen saturation, hemoglobin concentration, and PaO2, was found to be greater than the observed value in the first 3 groups (p < 0.001); whereas in group N4 these 2 values were comparable. It was also found that the gradient was higher when there was a decrease in SaO2 and an increase in the hemoglobin level. After hyperventilation, in groups N1 and N3, deltaPaCO2-PE'CO2 was decreased when compared with their baseline values; this reduction was not as much as predicted (p = 0.363 and 0.236, respectively). However, in groups N2 and N4 posthyperventilation, the deltaPaCO2-PE'27 CO2 was decreased significantly below their baseline measurements. These decreases were as much predicted. The deltaPaCO2-end-tidal carbon dioxide (PE'CO2) can be increased both in cyanotic and acyanotic children. Increased PAP is as important as increased PBF or right-to-left shunting in producing disorders in carbon dioxide homeostasis. Hyperventilation is of little use in reducing deltaPaCO2-PE'CO2 in children with high PAPs and pulmonary hyperperfusion.

Cherenkov radiation-based three-dimensional position-sensitive PET detector: A Monte Carlo study.

PubMed

Ota, Ryosuke; Yamada, Ryoko; Moriya, Takahiro; Hasegawa, Tomoyuki

2018-05-01

Cherenkov radiation has recently received attention due to its prompt emission phenomenon, which has the potential to improve the timing performance of radiation detectors dedicated to positron emission tomography (PET). In this study, a Cherenkov-based three-dimensional (3D) position-sensitive radiation detector was proposed, which is composed of a monolithic lead fluoride (PbF 2 ) crystal and a photodetector array of which the signals can be readout independently. Monte Carlo simulations were performed to estimate the performance of the proposed detector. The position- and time resolution were evaluated under various practical conditions. The radiator size and various properties of the photodetector, e.g., readout pitch and single photon timing resolution (SPTR), were parameterized. The single photon time response of the photodetector was assumed to be a single Gaussian for the simplification. The photo detection efficiency of the photodetector was ideally 100% for all wavelengths. Compton scattering was included in simulations, but partly analyzed. To estimate the position at which a γ-ray interacted in the Cherenkov radiator, the center-of-gravity (COG) method was employed. In addition, to estimate the depth-of-interaction (DOI) principal component analysis (PCA), which is a multivariate analysis method and has been used to identify the patterns in data, was employed. The time-space distribution of Cherenkov photons was quantified to perform PCA. To evaluate coincidence time resolution (CTR), the time difference of two independent γ-ray events was calculated. The detection time was defined as the first photon time after the SPTR of the photodetector was taken into account. The position resolution on the photodetector plane could be estimated with high accuracy, by using a small number of Cherenkov photons. Moreover, PCA showed an ability to estimate the DOI. The position resolution heavily depends on the pitch of the photodetector array and the radiator thickness. If the readout pitch were ideally 0 and practically 3 mm, a full-width at half-maximum (FWHM) of 0.348 and 1.92 mm was achievable with a 10-mm-thick PbF 2 crystal, respectively. Furthermore, first-order correlation could be observed between the primary principal component and the true DOI. To obtain a coincidence timing resolution better than 100-ps FWHM with a 20-mm-thick PbF 2 crystal, a photodetector with SPTR of better than σ = 30 ps was necessary. From these results, the improvement of SPTR allows us to achieve CTR better than 100-ps FWHM, even in the case where a 20-mm-thick radiator is used. Our proposed detector has the potential to estimate the 3D interaction position of γ-rays in the radiator, using only time and space information of Cherenkov photons. © 2018 American Association of Physicists in Medicine.

76 FR 4579 - Approval and Promulgation of Air Quality Implementation Plan; New Jersey and New York...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-26

... supported by an adequate technical analysis. EPA recommended the various types of information that could be...) must be supported by an adequate technical analysis. In the 2009 Guidance, EPA recommended the various...) because the State did not evaluate or demonstrate with a technical analysis that the emissions reduction...

76 FR 4584 - Approval and Promulgation of Air Quality Implementation Plans; Georgia; Disapproval of Interstate...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-26

... conclusion must be supported by an adequate technical analysis. Second, EPA recommended the various types of... requirement of section 110(a)(2)(D)(i)(I) must be supported by an adequate technical analysis. Additionally... evaluate or demonstrate with a technical analysis that this measure and their intention to rely to the...

78 FR 11124 - EPA Responses to State and Tribal 2010 Sulfur Dioxide Designation Recommendations: Notice of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-15

... supporting technical analyses, can be found on the EPA's Internet Web site at http://www.epa.gov... you for clarification due to technical difficulties, the EPA may not be able to consider your input... possible in supporting your views. Describe any assumptions and provide any technical information and/or...

Engineering Technical Support Center Annual Report Fiscal Year 2014; Technical Support and Innovative Research for Contaminated Sites

EPA Science Inventory

This report highlights significant projects that the ETSC has supported throughout fiscal year 2014. Projects have addressed an array of environmental scenarios, including but not limited to remote mining contamination, expansive landfill waste, sediment remediation by capping, ...

Urban Rail Supporting Technology Program Fiscal Year 1974 Year End Summary

DOT National Transportation Integrated Search

1975-03-01

Major areas include program management, technical support and application engineering, facilities development, test and evaluation, and technology development. Specific technical discussion includes track measurement systems; UMTA facilities developm...

Solar Technical Assistance Team Webinars | State, Local, and Tribal

Science.gov Websites

Governments | NREL Solar Technical Assistance Team Webinars Solar Technical Assistance Team Webinars NREL's Solar Technical Assistance Team (STAT), with support from the U.S. Department of Energy

Effects of Demographic Characteristics, Educational Background, and Supporting Factors on ICT Readiness of Technical and Vocational Teachers in Malaysia

ERIC Educational Resources Information Center

Alazzam, Abu-Obaideh; Bakar, Ab Rahim; Hamzah, Ramlah; Asimiran, S.

2012-01-01

The aim of this study was to examine ICT readiness and the effects of demographic characteristics, educational background, and support factors on the ICT readiness of technical and vocational teachers in Malaysia. The questionnaire was administered to 329 technical and vocational teachers who are teaching engineering subjects in Malaysian…

Engineering Technical Support Center Annual Report Fiscal Year 2013; Technical Support and Innovative Research for Contaminated Sites

EPA Science Inventory

This report summarizes a variety of significant projects that the ETSC, located in the Land Remediation and Pollution Control Division (LRPCD), National Risk Management Research Laboratory (NRMRL), has supported throughout fiscal year 2013. Projects have addressed an array of env...

Technical Support Services for the Office of Naval Research Littoral Warfare Advanced Development Project

DTIC Science & Technology

2005-09-30

Technical Support Services for the Office of Naval Research Littoral Warfare Advanced Development Project William R. Metzger Marine...Support Services for the Office of Naval Research Littoral Warfare Advanced Development Project 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT

77 FR 28393 - Disease, Disability, and Injury Prevention and Control Special Emphasis Panel (SEP): Initial Review

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-14

... Support Post Earthquake Reconstruction, Cholera and HIV/AIDS Response, FOA GH12-001, and Research and Technical Assistance for Public Health Laboratories in Haiti to Support Post Earthquake Reconstruction... and Technical Assistance for Public Health Interventions in Haiti to Support Post Earthquake...

Feasibility of quantification of the distribution of blood flow in the normal human fetal circulation using CMR: a cross-sectional study.

PubMed

Seed, Mike; van Amerom, Joshua F P; Yoo, Shi-Joon; Al Nafisi, Bahiyah; Grosse-Wortmann, Lars; Jaeggi, Edgar; Jansz, Michael S; Macgowan, Christopher K

2012-11-26

We present the first phase contrast (PC) cardiovascular magnetic resonance (CMR) measurements of the distribution of blood flow in twelve late gestation human fetuses. These were obtained using a retrospective gating technique known as metric optimised gating (MOG). A validation experiment was performed in five adult volunteers where conventional cardiac gating was compared with MOG. Linear regression and Bland Altman plots were used to compare MOG with the gold standard of conventional gating. Measurements using MOG were then made in twelve normal fetuses at a median gestational age of 37 weeks (range 30-39 weeks). Flow was measured in the major fetal vessels and indexed to the fetal weight. There was good correlation between the conventional gated and MOG measurements in the adult validation experiment (R=0.96). Mean flows in ml/min/kg with standard deviations in the major fetal vessels were as follows: combined ventricular output (CVO) 540 ± 101, main pulmonary artery (MPA) 327 ± 68, ascending aorta (AAo) 198 ± 38, superior vena cava (SVC) 147 ± 46, ductus arteriosus (DA) 220 ± 39,pulmonary blood flow (PBF) 106 ± 59,descending aorta (DAo) 273 ± 85, umbilical vein (UV) 160 ± 62, foramen ovale (FO)107 ± 54. Results expressed as mean percentages of the CVO with standard deviations were as follows: MPA 60 ± 4, AAo37 ± 4, SVC 28 ± 7, DA 41 ± 8, PBF 19 ± 10, DAo50 ± 12, UV 30 ± 9, FO 21 ± 12. This study demonstrates how PC CMR with MOG is a feasible technique for measuring the distribution of the normal human fetal circulation in late pregnancy. Our preliminary results are in keeping with findings from previous experimental work in fetal lambs.

Using an Alternate Reality Game to Increase Physical Activity and Decrease Obesity Risk of College Students

PubMed Central

Johnston, Jeanne D.; Massey, Anne P.; Marker-Hoffman, Rickie Lee

2012-01-01

Background This quasi-experimental study investigated a game intervention—specifically, an alternate reality game (ARG)—as a means to influence college students’ physical activity (PA). An ARG is an interactive narrative that takes place in the real world and uses multiple media to reveal a story. Method Three sections of a college health course (n = 115 freshman students) were assigned either to a game group that played the ARG or to a comparison group that learned how to use exercise equipment in weekly laboratory sessions. Pre- and post-intervention measures included weight, waist circumference, body mass index (BMI), percentage body fat (PBF), and self-reported moderate physical activity (MPA) and vigorous physical activity (VPA), and PA (steps/week). Results A significant group x time interaction (p = .001) was detected for PA, with a significant increase in PA for the game (p < .001) versus a significant decrease (p = .001) for the comparison group. Significant within-group increases for weight (p = .001), BMI (p = .001), and PBF (p = .001) were detected. A significant group x time interaction (p = .001) was detected when analyzing self-reported VPA, with both groups reporting decreases in VPA over time; however, the decrease was only significant for the comparison group (p < .001). No significant group differences were found for MPA. Conclusions It is important that any intervention meet the needs and interests of its target population. Here, the ARG was designed in light of the learning preferences of today’s college students—collaborative and social, experiential and media-rich. Our results provide preliminary evidence that a game intervention can positively influence PA within the college student population. PMID:22920809

Open lung approach vs acute respiratory distress syndrome network ventilation in experimental acute lung injury.

PubMed

Spieth, P M; Güldner, A; Carvalho, A R; Kasper, M; Pelosi, P; Uhlig, S; Koch, T; Gama de Abreu, M

2011-09-01

Setting and strategies of mechanical ventilation with positive end-expiratory pressure (PEEP) in acute lung injury (ALI) remains controversial. This study compares the effects between lung-protective mechanical ventilation according to the Acute Respiratory Distress Syndrome Network recommendations (ARDSnet) and the open lung approach (OLA) on pulmonary function and inflammatory response. Eighteen juvenile pigs were anaesthetized, mechanically ventilated, and instrumented. ALI was induced by surfactant washout. Animals were randomly assigned to mechanical ventilation according to the ARDSnet protocol or the OLA (n=9 per group). Gas exchange, haemodynamics, pulmonary blood flow (PBF) distribution, and respiratory mechanics were measured at intervals and the lungs were removed after 6 h of mechanical ventilation for further analysis. PEEP and mean airway pressure were higher in the OLA than in the ARDSnet group [15 cmH(2)O, range 14-18 cmH(2)O, compared with 12 cmH(2)O; 20.5 (sd 2.3) compared with 18 (1.4) cmH(2)O by the end of the experiment, respectively], and OLA was associated with improved oxygenation compared with the ARDSnet group after 6 h. OLA showed more alveolar overdistension, especially in gravitationally non-dependent regions, while the ARDSnet group was associated with more intra-alveolar haemorrhage. Inflammatory mediators and markers of lung parenchymal stress did not differ significantly between groups. The PBF shifted from ventral to dorsal during OLA compared with ARDSnet protocol [-0.02 (-0.09 to -0.01) compared with -0.08 (-0.12 to -0.06), dorsal-ventral gradients after 6 h, respectively]. According to the OLA, mechanical ventilation improved oxygenation and redistributed pulmonary perfusion when compared with the ARDSnet protocol, without differences in lung inflammatory response.

Effects of parents' employment status on changes in body mass index and percent body fat in adolescent girls.

PubMed

Lee, Sunmin; Young, Deborah Rohm; Pratt, Charlotte A; Jobe, Jared B; Chae, Soo Eun; McMurray, Robert G; Johnson, Carolyn C; Going, Scott B; Elder, John P; Stevens, June

2012-12-01

Parents' employment status is frequently cited as a possible predictor of child weight status. Despite the importance of the topic, only a few studies have been conducted. No longitudinal studies have been conducted in the United States. A cohort of 1201 girls from the Trial of Activity for Adolescent Girls was used. Height, weight, and percent body fat (PBF) were measured at the 6th and 8th grades. Parents' employment status (measured at 6th grade) was categorized into working full time (reference), part time, unemployed, working or staying at home, and don't know. Mixed-model regression was used to reflect the hierarchical design of our study and adjusted for age, race, parents' education level, free or reduced-price school lunch status, and living arrangement. Girls whose mothers worked part time or stayed at home had a decreased risk of excess weight gain [relative risk (RR) = 0.94, 95% confidence interval (CI) 0.88, 1.00; RR = 0.89, 95% CI 0.79, 1.00, respectively] compared to girls whose mothers worked full time. Girls whose fathers were unemployed had a moderately increased risk of excess weight gain (RR = 1.13, 95% CI 1.00, 1.26) compared to girls whose fathers worked full time. Having an unemployed mother or part-time or stay-at-home father was not associated with excess weight gain. Parents' employment status was not associated with excess PBF gain. Our findings suggest that the availability of the mother has a greater influence on the weight of the daughter than the availability of the father. There is a need for a better understanding of how parents' employment status influences excess weight gain in adolescent girls.

Endothelin-1 stimulates catalase activity through the PKCδ mediated phosphorylation of Serine 167

PubMed Central

Rafikov, Ruslan; Kumar, Sanjiv; Aggarwal, Saurabh; Hou, Yali; Kangath, Archana; Pardo, Daniel; Fineman, Jeffrey R.; Black, Stephen M.

2013-01-01

Our previous studies have shown that endothelin-1 (ET-1) stimulates catalase activity in endothelial cells and lambs with acute increases in pulmonary blood flow (PBF), without altering gene expression. The purpose of this study was to investigate the molecular mechanism by which this occurs. Exposing pulmonary arterial endothelial cells (PAEC) to ET-1 increased catalase activity and decreased cellular hydrogen peroxide (H2O2) levels. These changes correlated with an increase in serine phosphorylated catalase. Using the inhibitory peptide δV1.1, this phosphorylation was shown to be PKCδ dependent. Mass spectrometry identified serine167 as the phosphorylation site. Site-directed mutagenesis was used to generate a phospho-mimic (S167D) catalase. Activity assays using recombinant protein purified from E.coli or transiently transfected COS-7 cells, demonstrated that S167D-catalase had an increased ability to degrade H2O2 compared to the wildtype enzyme. Using a phospho-specific antibody, we were able to verify that pS167 catalase levels are modulated in lambs with acute increases in PBF in the presence and absence of the ET receptor antagonist, tezosentan. S167 is being located on the dimeric interface suggesting it could be involved in regulating the formation of catalase tetramers. To evaluate this possibility we utilized analytical gel-filtration to examine the multimeric structure of recombinant wildtype- and S167D-catalase. We found that recombinant wildtype catalase was present as a mixture of monomers and dimers while S167D catalase was primarily tetrameric. Further, the incubation of wildtype catalase with PKCδ was sufficient to convert wildtype catalase into a tetrameric structure. In conclusion, this is the first report indicating that the phosphorylation of catalase regulates its multimeric structure and activity. PMID:24211614

Effects of Parents' Employment Status on Changes in Body Mass Index and Percent Body Fat in Adolescent Girls

PubMed Central

Young, Deborah Rohm; Pratt, Charlotte A.; Jobe, Jared B.; Chae, Soo Eun; McMurray, Robert G.; Johnson, Carolyn C.; Going, Scott B.; Elder, John P.; Stevens, June

2012-01-01

Abstract Background Parents' employment status is frequently cited as a possible predictor of child weight status. Despite the importance of the topic, only a few studies have been conducted. No longitudinal studies have been conducted in the United States. Methods A cohort of 1201 girls from the Trial of Activity for Adolescent Girls was used. Height, weight, and percent body fat (PBF) were measured at the 6th and 8th grades. Parents' employment status (measured at 6th grade) was categorized into working full time (reference), part time, unemployed, working or staying at home, and don't know. Mixed-model regression was used to reflect the hierarchical design of our study and adjusted for age, race, parents' education level, free or reduced-price school lunch status, and living arrangement. Results Girls whose mothers worked part time or stayed at home had a decreased risk of excess weight gain [relative risk (RR)=0.94, 95% confidence interval (CI) 0.88, 1.00; RR=0.89, 95% CI 0.79, 1.00, respectively] compared to girls whose mothers worked full time. Girls whose fathers were unemployed had a moderately increased risk of excess weight gain (RR=1.13, 95% CI 1.00, 1.26) compared to girls whose fathers worked full time. Having an unemployed mother or part-time or stay-at-home father was not associated with excess weight gain. Parents' employment status was not associated with excess PBF gain. Conclusions Our findings suggest that the availability of the mother has a greater influence on the weight of the daughter than the availability of the father. There is a need for a better understanding of how parents' employment status influences excess weight gain in adolescent girls. PMID:23181918

Using an alternate reality game to increase physical activity and decrease obesity risk of college students.

PubMed

Johnston, Jeanne D; Massey, Anne P; Marker-Hoffman, Rickie Lee

2012-07-01

This quasi-experimental study investigated a game intervention--specifically, an alternate reality game (ARG)--as a means to influence college students' physical activity (PA). An ARG is an interactive narrative that takes place in the real world and uses multiple media to reveal a story. Three sections of a college health course (n = 115 freshman students) were assigned either to a game group that played the ARG or to a comparison group that learned how to use exercise equipment in weekly laboratory sessions. Pre- and post-intervention measures included weight, waist circumference, body mass index (BMI), percentage body fat (PBF), and self-reported moderate physical activity (MPA) and vigorous physical activity (VPA), and PA (steps/week). A significant group x time interaction (p = .001) was detected for PA, with a significant increase in PA for the game (p < .001) versus a significant decrease (p = .001) for the comparison group. Significant within-group increases for weight (p = .001), BMI (p = .001), and PBF (p = .001) were detected. A significant group x time interaction (p = .001) was detected when analyzing self-reported VPA, with both groups reporting decreases in VPA over time; however, the decrease was only significant for the comparison group (p < .001). No significant group differences were found for MPA. It is important that any intervention meet the needs and interests of its target population. Here, the ARG was designed in light of the learning preferences of today's college students--collaborative and social, experiential and media-rich. Our results provide preliminary evidence that a game intervention can positively influence PA within the college student population. © 2012 Diabetes Technology Society.

Composition dependent structural and optical properties of PbF₂-TeO₂-B₂O₃-Eu₂O₃ glasses.

PubMed

Wagh, Akshatha; Raviprakash, Y; Upadhyaya, Vyasa; Kamath, Sudha D

2015-12-05

Boric oxide based quaternary glasses in the system PbF2-TeO2-B2O3-Eu2O3 have been prepared by melt quenching technique. Density, molar volume, FTIR, UV-Vis techniques were used to probe the structural modifications with incorporation of europium ions in the glass network. An increase in glass density & decrease in molar volume (Vm) values proved the structural changes occurring in coordination of boron atom [conversion of BO3 units to BO4]. This resulted in the increase of the compaction of the prepared glasses with increase in Eu2O3 contents. The amorphous natures of the samples were ascertained by XRD and metallization criterion (M) studies. XPS study showed the values of core-level binding energy [O1s, Eu3d, Eu4d, Te3d, Te4d, Pd4f, Pb5d, O1s, and F1s] of (PbF2-TeO2-B2O3-Eu2O3) the glass matrix. The frequency and temperature dependence of dielectric properties of present glasses were investigated in the frequency range of 1 Hz-10 MHz and temperature range of 313-773K. The study of dielectric measurements proved good insulating and thermal stability of the prepared glasses. At room temperature, dielectric loss [tanδ] values were negligibly small for prepared glasses and increased with increase in temperature. FTIR spectroscopy results were in good agreement with optical band energy gap, density, molar volume and hardness values revealing network modifications caused by europium ions in the glass structure. Copyright © 2015 Elsevier B.V. All rights reserved.

Cenozoic intraplate tectonics in Central Patagonia: Record of main Andean phases in a weak upper plate

NASA Astrophysics Data System (ADS)

Gianni, G. M.; Echaurren, A.; Folguera, A.; Likerman, J.; Encinas, A.; García, H. P. A.; Dal Molin, C.; Valencia, V. A.

2017-11-01

Contraction in intraplate areas is still poorly understood relative to similar deformation at plate margins. In order to contribute to its comprehension, we study the Patagonian broken foreland (PBF) in South America whose evolution remains controversial. Time constraints of tectonic events and structural characterization of this belt are limited. Also, major causes of strain location in this orogen far from the plate margin are enigmatic. To unravel tectonic events, we studied the Cenozoic sedimentary record of the central sector of the Patagonian broken foreland (San Bernardo fold and thrust belt, 44°30‧S-46°S) and the Andes (Meseta de Chalia, 46°S) following an approach involving growth-strata detection, U-Pb geochronology and structural modeling. Additionally, we elaborate a high resolution analysis of the effective elastic thickness (Te) to examine the relation between intraplate contraction location and variations in lithospheric strength. The occurrence of Eocene growth-strata ( 44-40 Ma) suggests that contraction in the Andes and the Patagonian broken foreland was linked to the Incaic phase. Detection of synextensional deposits suggests that the broken foreland collapsed partially during Oligocene to early Miocene. During middle Miocene times, the Quechua contractional phase produced folding of Neogene volcanic rocks and olistostrome deposition at 17 Ma. Finally, the presented Te map shows that intraplate contraction related to Andean phases localized preferentially along weak lithospheric zones (Te < 15 km). Hence, the observed strain distribution in the PBF appears to be controlled by lateral variations in the lithospheric strength. Variations in this parameter could be related to thermo-mechanical weakening produced by intraplate rifting in Paleozoic-Mesozoic times.

Household costs and time to seek care for pregnancy related complications: The role of results-based financing.

PubMed

Chinkhumba, Jobiba; De Allegri, Manuela; Mazalale, Jacob; Brenner, Stephan; Mathanga, Don; Muula, Adamson S; Robberstad, Bjarne

2017-01-01

Results-based financing (RBF) schemes-including performance based financing (PBF) and conditional cash transfers (CCT)-are increasingly being used to encourage use and improve quality of institutional health care for pregnant women in order to reduce maternal and neonatal mortality in low-income countries. While there is emerging evidence that RBF can increase service use and quality, little is known on the impact of RBF on costs and time to seek care for obstetric complications, although the two represent important dimensions of access. We conducted this study to fill the existing gap in knowledge by investigating the impact of RBF (PBF+CCT) on household costs and time to seek care for obstetric complications in four districts in Malawi. The analysis included data on 2,219 women with obstetric complications from three waves of a population-based survey conducted at baseline in 2013 and repeated in 2014(midline) and 2015(endline). Using a before and after approach with controls, we applied generalized linear models to study the association between RBF and household costs and time to seek care. Results indicated that receipt of RBF was associated with a significant reduction in the expected mean time to seek care for women experiencing an obstetric complication. Relative to non-RBF, time to seek care in RBF areas decreased by 27.3% (95%CI: 28.4-25.9) at midline and 34.2% (95%CI: 37.8-30.4) at endline. No substantial change in household costs was observed. We conclude that the reduced time to seek care is a manifestation of RBF induced quality improvements, prompting faster decisions on care seeking at household level. Our results suggest RBF may contribute to timely emergency care seeking and thus ultimately reduce maternal and neonatal mortality in beneficiary populations.

Planning a DSN support section technical library

NASA Technical Reports Server (NTRS)

Bailey, T.; Chatburn, C. C.

1980-01-01

The planning procedure being used to establish a technical library for the Deep Space Network support section is described. The inventory and survey methods employed are described and the preliminary results of these methods are discussed.

Draft federal GHG accounting and reporting : technical support document

DOT National Transportation Integrated Search

2010-07-01

This is a technical support document (TSD) that accompanies the Federal Greenhouse Gas Accounting and Reporting Guidance (or Guidance). This document provides detailed information on the inventory reporting process and accepted calculation methodolog...

The coevolution of innovation and technical intelligence in primates

PubMed Central

Street, Sally E.; Whalen, Andrew; Laland, Kevin N.

2016-01-01

In birds and primates, the frequency of behavioural innovation has been shown to covary with absolute and relative brain size, leading to the suggestion that large brains allow animals to innovate, and/or that selection for innovativeness, together with social learning, may have driven brain enlargement. We examined the relationship between primate brain size and both technical (i.e. tool using) and non-technical innovation, deploying a combination of phylogenetically informed regression and exploratory causal graph analyses. Regression analyses revealed that absolute and relative brain size correlated positively with technical innovation, and exhibited consistently weaker, but still positive, relationships with non-technical innovation. These findings mirror similar results in birds. Our exploratory causal graph analyses suggested that technical innovation shares strong direct relationships with brain size, body size, social learning rate and social group size, whereas non-technical innovation did not exhibit a direct relationship with brain size. Nonetheless, non-technical innovation was linked to brain size indirectly via diet and life-history variables. Our findings support ‘technical intelligence’ hypotheses in linking technical innovation to encephalization in the restricted set of primate lineages where technical innovation has been reported. Our findings also provide support for a broad co-evolving complex of brain, behaviour, life-history, social and dietary variables, providing secondary support for social and ecological intelligence hypotheses. The ability to gain access to difficult-to-extract, but potentially nutrient-rich, resources through tool use may have conferred on some primates adaptive advantages, leading to selection for brain circuitry that underlies technical proficiency. PMID:26926276

The coevolution of innovation and technical intelligence in primates.

PubMed

Navarrete, Ana F; Reader, Simon M; Street, Sally E; Whalen, Andrew; Laland, Kevin N

2016-03-19

In birds and primates, the frequency of behavioural innovation has been shown to covary with absolute and relative brain size, leading to the suggestion that large brains allow animals to innovate, and/or that selection for innovativeness, together with social learning, may have driven brain enlargement. We examined the relationship between primate brain size and both technical (i.e. tool using) and non-technical innovation, deploying a combination of phylogenetically informed regression and exploratory causal graph analyses. Regression analyses revealed that absolute and relative brain size correlated positively with technical innovation, and exhibited consistently weaker, but still positive, relationships with non-technical innovation. These findings mirror similar results in birds. Our exploratory causal graph analyses suggested that technical innovation shares strong direct relationships with brain size, body size, social learning rate and social group size, whereas non-technical innovation did not exhibit a direct relationship with brain size. Nonetheless, non-technical innovation was linked to brain size indirectly via diet and life-history variables. Our findings support 'technical intelligence' hypotheses in linking technical innovation to encephalization in the restricted set of primate lineages where technical innovation has been reported. Our findings also provide support for a broad co-evolving complex of brain, behaviour, life-history, social and dietary variables, providing secondary support for social and ecological intelligence hypotheses. The ability to gain access to difficult-to-extract, but potentially nutrient-rich, resources through tool use may have conferred on some primates adaptive advantages, leading to selection for brain circuitry that underlies technical proficiency. © 2016 The Author(s).

7 CFR 653.3 - Adaptation of technical standards.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 6 2012-01-01 2012-01-01 false Adaptation of technical standards. 653.3 Section 653.3..., DEPARTMENT OF AGRICULTURE SUPPORT ACTIVITIES TECHNICAL STANDARDS § 653.3 Adaptation of technical standards. Technical standards and criteria developed on a national basis may require special adaptation to meet local...

7 CFR 653.3 - Adaptation of technical standards.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 6 2014-01-01 2014-01-01 false Adaptation of technical standards. 653.3 Section 653.3..., DEPARTMENT OF AGRICULTURE SUPPORT ACTIVITIES TECHNICAL STANDARDS § 653.3 Adaptation of technical standards. Technical standards and criteria developed on a national basis may require special adaptation to meet local...

7 CFR 653.3 - Adaptation of technical standards.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 6 2011-01-01 2011-01-01 false Adaptation of technical standards. 653.3 Section 653.3..., DEPARTMENT OF AGRICULTURE SUPPORT ACTIVITIES TECHNICAL STANDARDS § 653.3 Adaptation of technical standards. Technical standards and criteria developed on a national basis may require special adaptation to meet local...

7 CFR 653.3 - Adaptation of technical standards.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 6 2013-01-01 2013-01-01 false Adaptation of technical standards. 653.3 Section 653.3..., DEPARTMENT OF AGRICULTURE SUPPORT ACTIVITIES TECHNICAL STANDARDS § 653.3 Adaptation of technical standards. Technical standards and criteria developed on a national basis may require special adaptation to meet local...

Technical support for Life Sciences communities on a production grid infrastructure.

PubMed

Michel, Franck; Montagnat, Johan; Glatard, Tristan

2012-01-01

Production operation of large distributed computing infrastructures (DCI) still requires a lot of human intervention to reach acceptable quality of service. This may be achievable for scientific communities with solid IT support, but it remains a show-stopper for others. Some application execution environments are used to hide runtime technical issues from end users. But they mostly aim at fault-tolerance rather than incident resolution, and their operation still requires substantial manpower. A longer-term support activity is thus needed to ensure sustained quality of service for Virtual Organisations (VO). This paper describes how the biomed VO has addressed this challenge by setting up a technical support team. Its organisation, tooling, daily tasks, and procedures are described. Results are shown in terms of resource usage by end users, amount of reported incidents, and developed software tools. Based on our experience, we suggest ways to measure the impact of the technical support, perspectives to decrease its human cost and make it more community-specific.

32 CFR 203.10 - Eligible activities.

Code of Federal Regulations, 2013 CFR

2013-07-01

... with technical reports that summarize data and support cleanup decisions. Technical assistance may be provided to review plans and interpret technical reports for community members of RABs and TRCs. These...) MISCELLANEOUS TECHNICAL ASSISTANCE FOR PUBLIC PARTICIPATION (TAPP) IN DEFENSE ENVIRONMENTAL RESTORATION...

32 CFR 203.10 - Eligible activities.

Code of Federal Regulations, 2014 CFR

2014-07-01

... with technical reports that summarize data and support cleanup decisions. Technical assistance may be provided to review plans and interpret technical reports for community members of RABs and TRCs. These...) MISCELLANEOUS TECHNICAL ASSISTANCE FOR PUBLIC PARTICIPATION (TAPP) IN DEFENSE ENVIRONMENTAL RESTORATION...

32 CFR 203.10 - Eligible activities.

Code of Federal Regulations, 2012 CFR

2012-07-01

... with technical reports that summarize data and support cleanup decisions. Technical assistance may be provided to review plans and interpret technical reports for community members of RABs and TRCs. These...) MISCELLANEOUS TECHNICAL ASSISTANCE FOR PUBLIC PARTICIPATION (TAPP) IN DEFENSE ENVIRONMENTAL RESTORATION...

Geotechnical support and topical studies for nuclear waste geologic repositories

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1989-01-01

The present report lists the technical reviews and comments made during the fiscal year 1988 and summarizes the technical progress of the topical studies. In the area of technical assistance, there were numerous activities detailed in the next section. These included 24 geotechnical support activities, including reviews of 6 Study Plans (SP) and participation in 6 SP Review Workshops, review of one whole document Site Characterization Plan (SCP) and participation in the Assembled Document SCP Review Workshops by 6 LBL reviewers; the hosting of a DOE program review, the rewriting of the project statement of work, 2 trips to technicalmore » and planning meetings; preparation of proposed work statements for two new topics for DOE, and 5 instances of technical assistance to DOE. These activities are described in a Table in the following section entitled Geoscience Technical Support for Nuclear Waste Geologic Repositories.''« less

Engineering Technical Support Center, Innovative Science and Technical Support for Cost-Effective Cleanups: Five Year Summary Report for 2007-2012

EPA Science Inventory

This report summarizes a variety of significant projects that ETSC and its colleagues in the Land Remediation and Pollution Control Division (LRPCD) have supported during the last five years. Projects have addressed an array of environmental scenarios, including remote mining co...

USAF/SCEEE Graduate Student Summer Support Program (1982). Management and Technical Report.

DTIC Science & Technology

1982-10-01

AD-A130 767 USAF/SCEEE GRADUATE STUDENT SUMMER SUPPORT PROGRAM (1982) MANAGEMENT AND..(U) SOUTHEASTERN CENTER FORELECTRICAL ENGINEERING EDUCATION INC...SUMMER SUPPORT PROGRAM Conducted by Southeastern Center for Electrical Engineering Education under USAF Contract Number F49620-82-C-0035 MANAGEMENT ...UNITED STATES AIR FORCE GRADUATE STUDENT SL24MER SUPPORT PROGRAM 1982 PROGRAM MANAGEMENT AND TECHNICAL REPORT SOUTHEASTERN CENTER FOR ELECTRICAL

Quality user support: Supporting quality users

DOE Office of Scientific and Technical Information (OSTI.GOV)

Woolley, T.C.

1994-12-31

During the past decade, fundamental changes have occurred in technical computing in the oil industry. Technical computing systems have moved from local, fragmented quantity, to global, integrated, quality. The compute power available to the average geoscientist at his desktop has grown exponentially. Technical computing applications have increased in integration and complexity. At the same time, there has been a significant change in the work force due to the pressures of restructuring, and the increased focus on international opportunities. The profile of the user of technical computing resources has changed. Users are generally more mature, knowledgeable, and team oriented than theirmore » predecessors. In the 1990s, computer literacy is a requirement. This paper describes the steps taken by Oryx Energy Company to address the problems and opportunities created by the explosive growth in computing power and needs, coupled with the contraction of the business. A successful user support strategy will be described. Characteristics of the program include: (1) Client driven support; (2) Empowerment of highly skilled professionals to fill the support role; (3) Routine and ongoing modification to the support plan; (4) Utilization of the support assignment to create highly trained advocates on the line; (5) Integration of the support role to the reservoir management team. Results of the plan include a highly trained work force, stakeholder teams that include support personnel, and global support from a centralized support organization.« less

Technical Support Project for Cleaning Up Contaminated Sites - Expertise Directory

EPA Pesticide Factsheets

This directory is searchable and provides a snapshot of the various types of expertise possessed by the current members of the three Technical Support Project forums. It is based on input provided by the members themselves.

76 FR 68429 - 36(b)(1) Arms Sales Notification

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-04

... documentation, U.S. Government and contractor engineering, technical, and logistics personnel support services, and other related elements of logistics support. (iv) Military Department: Navy (USMC) (SDH). (v.... Government and contractor engineering, technical, and logistics personnel [[Page 68432

Technical Support Document for Title V Permitting of Printing Facilities

EPA Pesticide Factsheets

Stationary source emissions monitoring is required to demonstrate that a source is meeting the requirements in Federal or state rules, including Title V. This document provides the technical support for compliance in the printing and publishing industry.

AHMCT Intelligent Roadway Information System (IRIS) technical support and testing

DOT National Transportation Integrated Search

2011-12-31

This report documents the research project AHMCT IRIS Technical Support and Testing, : performed under contract 65A0275, Task ID 1777. It presents an overview of the Intelligent : Roadway Information System (IRIS), and its design and function. ...

AHMCT Intelligent Roadway Information System (IRIS) technical support and testing.

DOT National Transportation Integrated Search

2011-12-01

This report documents the research project AHMCT IRIS Technical Support and Testing, : performed under contract 65A0275, Task ID 1777. It presents an overview of the Intelligent : Roadway Information System (IRIS), and its design and function. ...

A systems approach to implementation of eLearning in medical education: five MEPI schools' journeys.

PubMed

Vovides, Yianna; Chale, Selamawit Bedada; Gadhula, Rumbidzayi; Kebaetse, Masego B; Nigussie, Netsanet Animut; Suleman, Fatima; Tibyampansha, Dativa; Ibrahim, Glory Ramadhan; Ntabaye, Moshi; Frehywot, Seble; Nkomazana, Oathokwa

2014-08-01

How should eLearning be implemented in resource-constrained settings? The introduction of eLearning at four African medical schools and one school of pharmacy, all part of the Medical Education Partnership Initiative (MEPI) eLearning Technical Working Group, highlighted the need for five factors essential for successful and sustainable implementation: institutional support; faculty engagement; student engagement; technical expertise; and infrastructure and support systems. All five MEPI schools reported strengthening technical expertise, infrastructure, and support systems; four schools indicated that they were also successful in developing student engagement; and three reported making good progress in building institutional support. Faculty engagement was the one core component that all five schools needed to enhance.

External Technical Support for School Improvement: Critical Issues from the Chilean Experience

ERIC Educational Resources Information Center

Osses, Alejandra; Bellei, Cristián; Valenzuela, Juan Pablo

2015-01-01

To what extent school improvement processes can be initiated and sustained from the outside has been a relevant question for policy-makers seeking to increase quality in education. Since 2008, the Chilean Government is strongly promoting the use of external technical support (ETS) services to support school improvement processes, as part of the…

78 FR 2449 - Office of Small Credit Unions (OSCUI) Grant Program Access for Credit Unions

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-11

... availability. The OSCUI Grant Program serves as a source of financial support, in the form of technical... provides financial support in the form of technical assistance grants to LICUs. These funds help improve...

77 FR 52698 - 36(b)(1) Arms Sales Notification

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-30

... training equipment, publications and technical data, U.S. Government and contractor technical and logistics personnel services and other related elements of program and logistics support. (iv) Military Department..., publications and technical data, U.S. Government and contractor technical and logistics personnel services and...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gauglitz, Phillip A.; Bontha, Jagannadha R.; Daniel, Richard C.

The Hanford Waste Treatment and Immobilization Plant (WTP) is currently being designed and constructed to pretreat and vitrify a large portion of the waste in the 177 underground waste storage tanks at the Hanford Site. A number of technical issues related to the design of the pretreatment facility (PTF) of the WTP have been identified. These issues must be resolved prior to the U.S. Department of Energy (DOE) Office of River Protection (ORP) reaching a decision to proceed with engineering, procurement, and construction activities for the PTF. One of the issues is Technical Issue T1 - Hydrogen Gas Release frommore » Vessels (hereafter referred to as T1). The focus of T1 is identifying controls for hydrogen release and completing any testing required to close the technical issue. In advance of selecting specific controls for hydrogen gas safety, a number of preliminary technical studies were initiated to support anticipated future testing and to improve the understanding of hydrogen gas generation, retention, and release within PTF vessels. These activities supported the development of a plan defining an overall strategy and approach for addressing T1 and achieving technical endpoints identified for T1. Preliminary studies also supported the development of a test plan for conducting testing and analysis to support closing T1. Both of these plans were developed in advance of selecting specific controls, and in the course of working on T1 it was decided that the testing and analysis identified in the test plan were not immediately needed. However, planning activities and preliminary studies led to significant technical progress in a number of areas. This report summarizes the progress to date from the preliminary technical studies. The technical results in this report should not be used for WTP design or safety and hazards analyses and technical results are marked with the following statement: “Preliminary Technical Results for Planning – Not to be used for WTP Design or Safety Analyses.”« less

The Independent Technical Analysis Process

DOE Office of Scientific and Technical Information (OSTI.GOV)

Duberstein, Corey A.; Ham, Kenneth D.; Dauble, Dennis D.

2007-04-13

The Bonneville Power Administration (BPA) contracted with the Pacific Northwest National Laboratory (PNNL) to provide technical analytical support for system-wide fish passage information (BPA Project No. 2006-010-00). The goal of this project was to produce rigorous technical analysis products using independent analysts and anonymous peer reviewers. In the past, regional parties have interacted with a single entity, the Fish Passage Center to access the data, analyses, and coordination related to fish passage. This project provided an independent technical source for non-routine fish passage analyses while allowing routine support functions to be performed by other well-qualified entities.

7 CFR 652.6 - Department delivery of technical services.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 6 2010-01-01 2010-01-01 false Department delivery of technical services. 652.6... CONSERVATION SERVICE, DEPARTMENT OF AGRICULTURE SUPPORT ACTIVITIES TECHNICAL SERVICE PROVIDER ASSISTANCE General Provisions § 652.6 Department delivery of technical services. (a) The Department may enter into a...

7 CFR 652.4 - Technical service standards.

Code of Federal Regulations, 2010 CFR

2010-01-01

... technologies and practices. (c) A technical service provider must assume responsibility in writing for the... 7 Agriculture 6 2010-01-01 2010-01-01 false Technical service standards. 652.4 Section 652.4..., DEPARTMENT OF AGRICULTURE SUPPORT ACTIVITIES TECHNICAL SERVICE PROVIDER ASSISTANCE General Provisions § 652.4...

Technical Assistance Needs Assessments (TANAs)

EPA Pesticide Factsheets

The Technical Assistance Needs Assessment (TANA) is a process to identify whether a community requires additional support from EPA in order to understand technical information and have meaningful participation in the Superfund decision-making process.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Green, D.W.; Heinrich, R.R.; Jensen, K.J.

Technical and administrative activities of the Analytical Chemistry Laboratory (ACL) are reported for fiscal year 1984. The ACL is a full-cost-recovery service center, with the primary mission of providing a broad range of technical support services to the scientific and engineering programs at ANL. In addition, ACL conducts a research program in analytical chemistry, works on instrumental and methods development, and provides analytical services for governmental, educational, and industrial organizations. The ACL is administratively within the Chemical Technology Division, the principal user, but provides technical support for all of the technical divisions and programs at ANL. The ACL has threemore » technical groups - Chemical Analysis, Instrumental Analysis, and Organic Analysis. Under technical activities 26 projects are briefly described. Under professional activities, a list is presented for publications and reports, oral presentations, awards and meetings attended. 6 figs., 2 tabs.« less

A Socio-technical Approach for Transient SME Alliances

NASA Astrophysics Data System (ADS)

Rezgui, Yacine

The paper discusses technical requirements to promote the adoption of alliance modes of operation by SMEs in the construction sector. These requirements have provided a basis for specifying a set of functionality to support the collaboration and cooperation needs of SMEs. While service-oriented architectures and semantic web services provide the middleware technology to implement the identified functionality, a number of key technical limitations have been identified, including lack of support for the dynamic and non-functional characteristics of SME alliances distributed business processes, lack of execution monitoring functionality to manage running business processes, and lack of support for semantic reasoning to enable SME business process service composition. The paper examines these issues and provides key directions for supporting SME alliances effectively.

Technical requirements for bioassay support services

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hickman, D.P.; Anderson, A.L.

1991-05-01

This document provides the technical basis for the Chem-Nuclear Geotech (Geotech) bioassay program. It includes information and details that can be used as a model in providing technical contents and requirements for bioassay laboratory support, either internally or in solicitations by Geotech to obtain subcontractor laboratory support. It provides a detailed summary and description of the types of bioassay samples to be expected in support of Geotech remedial projects for the US Department of Energy and the bioassay services and analytical requirements necessary to process such samples, including required limits of sensitivity. General responsibilities of the bioassay laboratory are alsomore » addressed, including quality assurance. Peripheral information of importance to the program is included in the appendices of this document. 7 tabs.« less

34 CFR 300.702 - Technical assistance.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 34 Education 2 2010-07-01 2010-07-01 false Technical assistance. 300.702 Section 300.702 Education..., and Use of Funds § 300.702 Technical assistance. (a) In general. The Secretary may reserve not more... to support technical assistance activities authorized under section 616(i) of the Act. (b) Maximum...

Site Characterization and Monitoring Technical Support Center FY16 Report

EPA Science Inventory

SCMTSC’s primary goal is to provide technical assistance to regional programs on complex hazardous waste site characterization issues. This annual report illustrates the range and extent of projects that SCMTSC supported in FY 2016. Our principal audiences are site project manage...

Implementation of quality improvement techniques for management and technical processes in the ACRV project

NASA Technical Reports Server (NTRS)

Raiman, Laura B.

1992-01-01

Total Quality Management (TQM) is a cooperative form of doing business that relies on the talents of everyone in an organization to continually improve quality and productivity, using teams and an assortment of statistical and measurement tools. The objective of the activities described in this paper was to implement effective improvement tools and techniques in order to build work processes which support good management and technical decisions and actions which are crucial to the success of the ACRV project. The objectives were met by applications in both the technical and management areas. The management applications involved initiating focused continuous improvement projects with widespread team membership. The technical applications involved applying proven statistical tools and techniques to the technical issues associated with the ACRV Project. Specific activities related to the objective included working with a support contractor team to improve support processes, examining processes involved in international activities, a series of tutorials presented to the New Initiatives Office and support contractors, a briefing to NIO managers, and work with the NIO Q+ Team. On the technical side, work included analyzing data from the large-scale W.A.T.E.R. test, landing mode trade analyses, and targeting probability calculations. The results of these efforts will help to develop a disciplined, ongoing process for producing fundamental decisions and actions that shape and guide the ACRV organization .

Implementation of quality improvement techniques for management and technical processes in the ACRV project

NASA Astrophysics Data System (ADS)

Raiman, Laura B.

1992-12-01

Total Quality Management (TQM) is a cooperative form of doing business that relies on the talents of everyone in an organization to continually improve quality and productivity, using teams and an assortment of statistical and measurement tools. The objective of the activities described in this paper was to implement effective improvement tools and techniques in order to build work processes which support good management and technical decisions and actions which are crucial to the success of the ACRV project. The objectives were met by applications in both the technical and management areas. The management applications involved initiating focused continuous improvement projects with widespread team membership. The technical applications involved applying proven statistical tools and techniques to the technical issues associated with the ACRV Project. Specific activities related to the objective included working with a support contractor team to improve support processes, examining processes involved in international activities, a series of tutorials presented to the New Initiatives Office and support contractors, a briefing to NIO managers, and work with the NIO Q+ Team. On the technical side, work included analyzing data from the large-scale W.A.T.E.R. test, landing mode trade analyses, and targeting probability calculations. The results of these efforts will help to develop a disciplined, ongoing process for producing fundamental decisions and actions that shape and guide the ACRV organization .

Clinical success of implant-supported and tooth-implant-supported double crown-retained dentures.

PubMed

Bernhart, Gunda; Koob, Andreas; Schmitter, Marc; Gabbert, Olaf; Stober, Thomas; Rammelsberg, Peter

2012-08-01

The objective of this retrospective study was to compare biological and technical complications of implant-supported and tooth-implant-supported double crown-retained dentures (DCRDs) with those of tooth-supported DCRDs. Sixty-three DCRDs were monitored. One study group included 16 prostheses with a combination of implants and natural teeth as double crowns (ti group), whereas in the second study group, 19 dentures were retained exclusively on implants (ii group); a third study group with 28 exclusively tooth-supported dentures served as controls (tt group). Tooth loss, implant failure, and technical complications (loss of retention of primary crown, abutment screw loosening, loss of facing, fracture of resin denture teeth and fracture of saddle resin) were analysed. During the observation period of 24 months, no implants or teeth were lost in the ti group and three technical complications were recorded. In the ii group, two implants were lost, two cases of peri-implantitis occurred and four technical complications were observed. In the tt group, two cases of tooth loss and seven technical complications were observed. At the time of the last examination, all prostheses of the ti group and the ii group were functional. Patients of these two study groups reported high satisfaction with both function and aesthetics with no significant difference between the two groups. Treatment with DCRDs showed comparable results in the three study groups. The 2-year results indicate that double crowns can be recommended for implant and combined tooth-implant-retained dentures.

Technical challenges involved in supporting the Lambda Point Experiment

NASA Technical Reports Server (NTRS)

Petrac, D.; Israelsson, U.; Otth, D.; Simmons, L.; Staats, J.; Thompson, A.

1990-01-01

The Lambda Point Experiment (LPE) is one of the instruments included in the U.S. Microgravity Payload Mission 1 planned for one of the Space Shuttle flights in 1992. The objective of the experiment is to measure the heat capacity of liquid helium within a narrow interval around the transition between superfluid and normal helium (the lambda point) with an unprecedented temperature resolution of about 10 to the -10th. Multiple technical challenges are presented in the areas of structural support, safety analysis, and modal frequency tests. This paper describes the technical challenges of JPL's multidisciplinary involvement in support of these experiments in microgravity.

ICU staffing: identification and survey of staff involved in providing technical support services to Australian and New Zealand intensive care units.

PubMed

Carter, B G; Kiraly, N; Hochmann, M; Stephens, R; Osborne, A

2007-04-01

We conducted a survey of all (200) Australian and New Zealand intensive care units to determine the presence and nature of staff employed in a technical support role. Specifically, we attempted to identify staff who are formally employed in a role where they are directly responsible for the equipment used in intensive care. Of 130 returned surveys, 80 units (62%) reported not having any personnel in this role. In these units technical tasks were most commonly performed by registered nurses (79%) but were also performed by a variety of other personnel. Fifty units (38%), consisting of approximately 105 individuals providing a total of 84.3 EFTs and most commonly in public (84%) or metropolitan (70%) hospitals or level 3 (64%) intensive care units, did have one or more staff acting in a formal technical support role. The most common groups filling the technical support role were nurses (42%), technicians (24%), biomedical engineers (10%) and technologists (6%). The most common duties performed were equipment troubleshooting (92%), training (80%), equipment evaluation (80%), ordering supplies (77%), consumable evaluation (75%), equipment cleaning (73%), delivery of supplies (70%), handling product recalls (65%), equipment maintenance (65%) and sitting on hospital committees (52%). This is the first attempt to identify and understand the technical support role in Australian and New Zealand intensive care units. Numerous issues remain and future work will hopefully add to our findings, with the possibility of formal recognition of the role, training and/or accreditation and its extension into other hospital departments.

Innovative Socio-Technical Environments in Support of Distributed Intelligence and Lifelong Learning

ERIC Educational Resources Information Center

Fischer, G; Konomi, S.

2007-01-01

Individual, unaided human abilities are constrained. Media have helped us to transcend boundaries in thinking, working, learning and collaborating by supporting "distributed intelligence". Wireless and mobile technologies provide new opportunities for creating novel socio-technical environments and thereby empowering humans, but not without…

ERD WATERSHED AND WATER QUALITY MODEL DEVELOPMENT AND TECHNICAL SUPPORT PROGRAM

EPA Science Inventory

The ERD has a long history in providing model research and development and technical support to Regions, States and the Office of Water for watersheds/water quality ecosystem research. The ERD efforts are described in major subtasks comprising the Program. Briefly, these are:

78 FR 36538 - 36(b)(1) Arms Sales Notification

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-18

... training equipment, U.S. Government and contractor engineering, technical and logistics support services... equipment, U.S. Government and contractor engineering, technical and logistics support services, and other... central government and the country's outlying areas. The sale of these C-130Js to Libya will significantly...

EPA Technical Support Centers (TSC): FY14 Lessons Learned

EPA Science Inventory

EPA’s Technical Support Centers (TSC) included in ORD’s Safe and Healthy Communities (SHC) Research Action Plan fill the need for supplying subject-matter experts to continually assess state-of-the-art research and practices and channel this information to users in both direct ap...

75 FR 27227 - Energy Conservation Program: Energy Conservation Standards for Residential Central Air...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-14

... that DOE could consider for these products. DOE also encouraged written comments on these subjects... conservation standards notice of public meeting (NOPM) and availability of the preliminary technical support... Federal Register notice announcing the availability of its preliminary technical support document for...

76 FR 17573 - Energy Conservation Standards for Commercial Refrigeration Equipment: Public Meeting and...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-30

... Preliminary Technical Support Document AGENCY: Office of Energy Efficiency and Renewable Energy, Department of Energy. ACTION: Notice of public meeting and availability of preliminary technical support document... refrigeration equipment. In addition, DOE encourages written comments on these subjects. To inform interested...

Groundwater Technical Support Center (GWTSC) Annual Report Fiscal Year 2016 (FY16)

EPA Science Inventory

The Groundwater Technical Support Center (GWTSC) is part of the Groundwater, Watershed, and Ecosystem Restoration Division (GWERD), which is based in the Robert S. Kerr Environmental Research Center in Ada, Oklahoma. The GWERD is a research division of EPA’s National Risk M...

78 FR 20503 - Energy Conservation Program: Availability of the Interim Technical Support Document for High...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-05

... Conservation Program: Availability of the Interim Technical Support Document for High-Intensity Discharge Lamps... high-intensity discharge (HID) lamps energy conservation standards in the Federal Register. This... interim analysis for high- intensity discharge lamps energy conservation standards. The notice provided...

76 FR 43175 - Approval of Air Quality Implementation Plans; Indiana and Ohio; Disapproval of Interstate...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-20

... impact. EPA stated that the state's conclusion should be supported by an adequate technical analysis. EPA... by an adequate technical analysis. IDEM did not provide a technical analysis in its submittal, but... technical analysis and justification necessary to make that demonstration. Indiana did not provide any...

Head Start Impact Study. Technical Report

ERIC Educational Resources Information Center

Puma, Michael; Bell, Stephen; Cook, Ronna; Heid, Camilla; Shapiro, Gary; Broene, Pam; Jenkins, Frank; Fletcher, Philip; Quinn, Liz; Friedman, Janet; Ciarico, Janet; Rohacek, Monica; Adams, Gina; Spier, Elizabeth

2010-01-01

This Technical Report is designed to provide technical detail to support the analysis and findings presented in the "Head Start Impact Study Final Report" (U.S. Department of Health and Human Services, January 2010). Chapter 1 provides an overview of the Head Start Impact Study and its findings. Chapter 2 provides technical information on the…

Ground Water Technical Support Center (GWTSC) Annual Report Fiscal Year 2014 (FY14)

EPA Science Inventory

The Ground Water Technical Support Center (GWTSC) is part of the Ground Water and Ecosystems Restoration Division (GWERD), which is based in the Robert S. Kerr Environmental Research Center in Ada, Oklahoma. The GWERD is a research division of U.S. EPA's National Risk Management...

Ground Water Technical Support Center (GWTSC) Annual Report Fiscal Year 2015

EPA Science Inventory

The Ground Water Technical Support Center (GWTSC) is part of the Ground Water and Ecosystems Restoration Division (GWERD), which is based in the Robert S. Kerr Environmental Research Center in Ada, Oklahoma. The GWERD is a research division of U.S. EPA’s National Risk Management ...

76 FR 67194 - Administration on Children, Youth and Families Announces the Award of a Single-Source Program...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-31

... Support Expanded Training and Technical Assistance to the Pennsylvania Coalition Against Domestic Violence... and Services Act (FVPSA) Technical Assistance (TA) Project. CFDA Number: 93.592. Statutory Authority... Domestic Violence in Harrisburg, PA. The supplemental funds will support the grantee in providing training...

75 FR 56021 - Energy Conservation Standards for Battery Chargers and External Power Supplies: Public Meeting...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-15

... Preliminary Technical Support Document AGENCY: Office of Energy Efficiency and Renewable Energy, Department of Energy. ACTION: Notice of public meeting and availability of preliminary technical support document... that DOE could consider for these products. DOE also encourages interested parties to submit written...

75 FR 14319 - Energy Conservation Standards for Fluorescent Lamp Ballasts: Public Meeting and Availability of...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-24

... Technical Support Document AGENCY: Office of Energy Efficiency and Renewable Energy, Department of Energy. ACTION: Notice of public meeting and availability of preliminary technical support document. SUMMARY: The... products. DOE encourages written comments on these subjects. To inform interested parties and facilitate...

76 FR 18127 - Energy Conservation Standards for Metal Halide Lamp Fixtures: Public Meeting and Availability of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-01

... Technical Support Document AGENCY: Office of Energy Efficiency and Renewable Energy, Department of Energy. ACTION: Notice of public meeting and availability of preliminary technical support document. SUMMARY: The... for this equipment. DOE encourages written comments on these subjects. To inform interested parties...

77 FR 43015 - Energy Conservation Standards for Commercial and Industrial Electric Motors: Public Meeting and...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-23

... Motors: Public Meeting and Availability of the Preliminary Technical Support Document AGENCY: Office of... availability of preliminary technical support document. SUMMARY: The U.S. Department of Energy (DOE or... consider for this equipment. DOE also encourages interested parties to submit written comments on these...

77 FR 13026 - Energy Conservation Program: Energy Conservation Standard for Automatic Commercial Ice Makers

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-05

... written comments on these subjects. This document announces an extension of the time period for submitting... preliminary technical support document (preliminary TSD) for automatic commercial ice makers. The comment... published a Federal Register notice announcing the availability of its preliminary technical support...

77 FR 3404 - Energy Conservation Standards for Automatic Commercial Ice Makers: Public Meeting and...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-24

... Technical Support Document AGENCY: Office of Energy Efficiency and Renewable Energy, Department of Energy. ACTION: Notice of public meeting and availability of preliminary technical support document. SUMMARY: The... commercial ice makers. In addition, DOE encourages written comments on these subjects. To inform interested...

75 FR 17080 - Energy Conservation Standards for Walk-in Coolers and Walk-in Freezers: Public Meeting and...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-05

... Preliminary Technical Support Document AGENCY: Office of Energy Efficiency and Renewable Energy, Department of Energy. ACTION: Notice of public meeting and availability of preliminary technical support document... consider for this equipment. In addition, DOE encourages written comments on these subjects. To inform...

77 FR 40530 - Energy Conservation Standards for Residential Furnace Fans: Public Meeting and Availability of...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-10

... Technical Support Document AGENCY: Office of Energy Efficiency and Renewable Energy, Department of Energy. ACTION: Notice of public meeting and availability of preliminary technical support document. SUMMARY: The... furnace fans. In addition, DOE encourages written comments on these subjects. To inform interested parties...

34 CFR 380.6 - What activities may the Secretary fund under technical assistance supported employment projects?

Code of Federal Regulations, 2010 CFR

2010-07-01

... Department of Education (Continued) OFFICE OF SPECIAL EDUCATION AND REHABILITATIVE SERVICES, DEPARTMENT OF EDUCATION SPECIAL PROJECTS AND DEMONSTRATIONS FOR PROVIDING SUPPORTED EMPLOYMENT SERVICES TO INDIVIDUALS... 34 Education 2 2010-07-01 2010-07-01 false What activities may the Secretary fund under technical...

(Review Draft) Radiation Site Cleanup Regulations: Technical Support Document For The Development Of Radionuclide Cleanup Levels For Soil

EPA Pesticide Factsheets

This document describes parts of the technical analysis being undertaken in support of standards that ensure certain sites are cleaned up to a level that is protective of human health and the environment before they are released for public use.

Technical assessment of PSSC-supported experiments and demonstrations

NASA Technical Reports Server (NTRS)

1978-01-01

A description of CTS and ATS short-term and long-term satellite demonstration supported through usage of a satellite communication ground station complex is presented. User assessments about the programmatic impact of their demonstrations and experiments were summarized. The technical planning and coordination process involved in satellite utilization is also presented.

ITS/CVO technical project management for non-technical managers : participant guide

DOT National Transportation Integrated Search

1998-09-01

In 1996, the FHWA Office of Motor Carriers (OMC) identified the need to develop a Technical Training Program to support the deployment of Intelligent Transportation System (ITS) technologies for Commercial Vehicle Operations (CVO). The workforce -...

7 CFR 652.36 - Appeal of decertification decisions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... technical service provider's written appeal, the Chief or his designee, will make a final determination, in... CONSERVATION SERVICE, DEPARTMENT OF AGRICULTURE SUPPORT ACTIVITIES TECHNICAL SERVICE PROVIDER ASSISTANCE... of the State Conservationist's decertification determination, the technical service provider may...

Principles and Procedures in Technical Assistance: An Approach to Educational Change

ERIC Educational Resources Information Center

Lillie, David L.; Black, Talbot

1976-01-01

The Technical Assistance Development System (TADS) has developed through the years a system for technical assistance and has identified some important principles that should be followed in the operation of organizational support systems. (Author/ER)

Technical assistance from state health departments for communities engaged in policy, systems, and environmental change: the ACHIEVE Program.

PubMed

Hefelfinger, Jenny; Patty, Alice; Ussery, Ann; Young, Walter

2013-10-24

This study assessed the value of technical assistance provided by state health department expert advisors and by the staff of the National Association of Chronic Disease Directors (NACDD) to community groups that participated in the Action Communities for Health, Innovation, and Environmental Change (ACHIEVE) Program, a CDC-funded health promotion program. We analyzed quantitative and qualitative data reported by community project coordinators to assess the nature and value of technical assistance provided by expert advisors and NACDD staff and the usefulness of ACHIEVE resources in the development and implementation of community action plans. A grounded theory approach was used to analyze and categorize phrases in text data provided by community coordinators. Open coding placed conceptual labels on text phrases. Frequency distributions of the quantitative data are described and discussed. The most valuable technical assistance and program support resources were those determined to be in the interpersonal domain (ie, interactions with state expert advisors, NACDD staff, and peer-to-peer support). The most valuable technical assistance events were action institutes, coaches' meetings, webinars, and technical assistance conference calls. This analysis suggests that ACHIEVE communities valued the management and training assistance provided by expert advisors and NACDD staff. State health department expert advisors provided technical guidance and support, including such skills or knowledge-based services as best-practice strategies, review and discussion of community assessment data, sustainability planning, and identification of possible funding opportunities. NACDD staff led development and implementation of technical assistance events.

Correlation Functions and Glass Structure

NASA Astrophysics Data System (ADS)

Chergui, Y.; Nehaoua, N.; Telghemti, B.; Guemid, S.; Deraddji, N. E.; Belkhir, H.; Mekki, D. E.

2011-04-01

This work presents the use of molecular dynamics (MD) and the code of Dl Poly, in order to study the structure of fluoride glass after melting and quenching. We are realized the processing phase liquid-phase, simulating rapid quenching at different speeds to see the effect of quenching rate on the operation of the devitrification. This technique of simulation has become a powerful tool for investigating the microscopic behaviour of matter as well as for calculating macroscopic observable quantities. As basic results, we calculated the interatomic distance, angles and statistics, which help us to know the geometric form and the structure of PbF2. These results are in experimental agreement to those reported in literature.

Technical Support Document for Version 3.9.1 of the COMcheck Software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bartlett, Rosemarie; Connell, Linda M.; Gowri, Krishnan

2012-09-01

COMcheck provides an optional way to demonstrate compliance with commercial and high-rise residential building energy codes. Commercial buildings include all use groups except single family and multifamily not over three stories in height. COMcheck was originally based on ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989) requirements and is intended for use with various codes based on Standard 90.1, including the Codification of ASHRAE/IES Standard 90.1-1989 (90.1-1989 Code) (ASHRAE 1989a, 1993b) and ASHRAE/IESNA Standard 90.1-1999 (Standard 90.1-1999). This includes jurisdictions that have adopted the 90.1-1989 Code, Standard 90.1-1989, Standard 90.1-1999, or their own code based on one of these. We view Standard 90.1-1989more » and the 90.1-1989 Code as having equivalent technical content and have used both as source documents in developing COMcheck. This technical support document (TSD) is designed to explain the technical basis for the COMcheck software as originally developed based on the ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989). Documentation for other national model codes and standards and specific state energy codes supported in COMcheck has been added to this report as appendices. These appendices are intended to provide technical documentation for features specific to the supported codes and for any changes made for state-specific codes that differ from the standard features that support compliance with the national model codes and standards. Beginning with COMcheck version 3.8.0, support for 90.1-1989, 90.1-1999, and the 1998 IECC and version 3.9.0 support for 2000 and 2001 IECC are no longer included, but those sections remain in this document for reference purposes.« less

AACE: an innovative partnership to enhance aircraft safety

NASA Astrophysics Data System (ADS)

Shurtleff, William W.

1999-01-01

The Federal Aviation Administration established the Airworthiness Assurance Center of Excellence (AACE) in September 1997, through a cooperative agreement grant with Iowa State University (ISU) and The Ohio State University (OSU). A technical support contract with the Center is now in place as well. Initially the Center has five areas of concentration supporting advances in airworthiness assurance. These are 1. Maintenance, inspection, and repair, 2. Propulsion and fuel systems safety, 3. Crashworthiness, 4. Advanced materials, and 5. Landing gear systems performance and safety. AACE has nine core members who provide guidance to the Program Management Office at ISU/OSU through a Board of Directors. The core members are: Arizona State University, Iowa State University, Northwestern University, The Ohio State University, University of Dayton, University of Maryland, University of California - Los Angeles, Wichita State University, and Sandia National Laboratories. The organization also includes numerous academic affiliates, industry partners, government laboratories and other organizations. The Center now has over thirty technical projects supporting technical advances in airworthiness assurance. All these projects have industry guidance and support. This paper discusses the current technical program of the center and the highlights of the five-year plan for technical work. Also included is a description of the factors that make the Center an innovative partnership to promote aircraft safety.

Space station attached payload program support

NASA Technical Reports Server (NTRS)

Estes, Maurice G., Jr.; Brown, Bardle D.

1989-01-01

The USRA is providing management and technical support for the peer review of the Space Station Freedom Attached Payload proposals. USRA is arranging for consultants to evaluate proposals, arranging meeting facilities for the reviewers to meet in Huntsville, Alabama and management of the actual review meetings. Assistance in developing an Experiment Requirements Data Base and Engineering/Technical Assessment support for the MSFC Technical Evaluation Team is also being provided. The results of the project will be coordinated into a consistent set of reviews and reports by USRA. The strengths and weaknesses analysis provided by the peer panel reviewers will by used NASA personnel in the selection of experiments for implementation on the Space Station Freedom.

Technical Assistance to Developers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rockward, Tommy; Borup, Rodney L.; Garzon, Fernando H.

2012-07-17

This task supports the allowance of technical assistance to fuel-cell component and system developers as directed by the DOE. This task includes testing of novel materials and participation in the further development and validation of single cell test protocols. This task also covers technical assistance to DOE Working Groups, the U.S. Council for Automotive Research (USCAR) and the USCAR/DOE Driving Research and Innovation for Vehicle efficiency and Energy sustainability (U.S. Drive) Fuel Cell Technology Team. Assistance includes technical validation of new fuel cell materials and methods, single cell fuel cell testing to support the development of targets and test protocols,more » and regular advisory participation in other working groups and reviews. This assistance is made available to PEM fuel cell developers by request and DOE Approval. The objectives are to: (1) Support technically, as directed by DOE, fuel cell component and system developers; (2) Assess fuel cell materials and components and give feedback to developers; (3) Assist the DOE Durability Working Group with the development of various new material durability Testing protocols; and (4) Provide support to the U.S. Council for Automotive Research (USCAR) and the USCAR/DOE Fuel Cell Technology Team. FY2012 specific technical objectives are: (1) Evaluate novel MPL materials; (2) Develop of startup/ shutdown protocol; (3) Test the impact of hydrophobic treatment on graphite bi-polar plates; (4) Perform complete diagnostics on metal bi-polar plates for corrosion; and (5) Participate and lead efforts in the DOE Working Groups.« less

7 CFR 652.21 - Certification criteria and requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... must: (1) Have the required technical training, education, and experience to perform the level of technical assistance for which certification is sought; (2) Meet any applicable professional or business... CONSERVATION SERVICE, DEPARTMENT OF AGRICULTURE SUPPORT ACTIVITIES TECHNICAL SERVICE PROVIDER ASSISTANCE...

Small Potatoes No More.

ERIC Educational Resources Information Center

Ries, Eric

2000-01-01

Idaho has improved its historically poor career and technical education programs by changing priorities and increasing state support. A large grant from the J.A. and Kathryn Albertson Foundation is being used to develop professional-technical academies and to train career and technical teachers. (JOW)

7 CFR 652.3 - Administration.

Code of Federal Regulations, 2010 CFR

2010-01-01

... AGRICULTURE SUPPORT ACTIVITIES TECHNICAL SERVICE PROVIDER ASSISTANCE General Provisions § 652.3 Administration. (a) As provided in this part, the Department will provide technical assistance to participants directly, or at the option of the participant, through a technical service provider in accordance with the...

7 CFR 652.2 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... AGRICULTURE SUPPORT ACTIVITIES TECHNICAL SERVICE PROVIDER ASSISTANCE General Provisions § 652.2 Definitions... public agencies certified by NRCS to provide technical services to a participant. Certification means the... technical service for conservation planning or a specific conservation practice or system; or (2) An entity...

Development of Hydrogen Education Programs for Government Officials

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baxter, Shannon; Keller, Russ

1. Subcontractor/Technical Subject Matter Expert (Tasks 1-3) 2. Technical lead for LFG cleanup and hydrogen production systems Support for Feasibility Study 3. Technical Lead for Feasibility Study Coordination of site preparation activities for all project equipment 4. Host site

47 CFR 80.659 - Technical requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 5 2010-10-01 2010-10-01 false Technical requirements. 80.659 Section 80.659 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES STATIONS IN THE MARITIME SERVICES Maritime Support Stations § 80.659 Technical requirements. The authorized frequency...

Exploring the Capability of Evaluating Technical Solutions: A Collaborative Study into the Primary Technology Classroom

ERIC Educational Resources Information Center

Björkholm, Eva

2014-01-01

Within the field of technology education, evaluating technical solutions is considered as an important topic. Research indicates that pupils have difficulties in evaluating technical solutions in terms of fitness for purpose, i.e. how effective a technical solution supports its intended function. By using the learning study, which is an iterative…

The Relationship between Return on Profitability and Costs of Outsourcing Information Technology Technical Support

ERIC Educational Resources Information Center

Odion, Segun

2011-01-01

The purpose of this quantitative correlational research study was to examine the relationship between costs of operation and total return on profitability of outsourcing information technology technical support in a two-year period of outsourcing operations. United States of America list of Fortune 1000 companies' chief information officers…

48 CFR 915.404-2 - Information to support proposal analysis.

Code of Federal Regulations, 2010 CFR

2010-10-01

... for the auditor's review. (ii) Copies of technical analysis reports prepared by DOE technical or other... proposal analysis. 915.404-2 Section 915.404-2 Federal Acquisition Regulations System DEPARTMENT OF ENERGY... support proposal analysis. (a)(1) Field pricing assistance as discussed in FAR 15.404-2(a) is not required...

Supporting Minority-Serving Institutions in Their Program Improvement Efforts: A Responsive Technical Assistance Approach

ERIC Educational Resources Information Center

Bay, Mary; Lopez-Reyna, Norma A.; Guillory, Barbara L.

2012-01-01

To reform a special education teacher preparation program can be gratifying, difficult, complex, political, and urgently needed. The Monarch Center, a federally funded technical assistance center, was established to guide and support minority-serving institutions in their efforts to improve their teacher preparation programs. Four guidelines…

Analytical Chemistry Division. Annual progress report for period ending December 31, 1980

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lyon, W.S.

1981-05-01

This report is divided into: analytical methodology; mass and emission spectrometry; technical support; bio/organic analysis; nuclear and radiochemical analysis; quality assurance, safety, and tabulation of analyses; supplementary activities; and presentation of research results. Separate abstracts were prepared for the technical support, bio/organic analysis, and nuclear and radiochemical analysis. (DLC)

A conservation ontology and knowledge base to support delivery of technical assistance to agricultural producers in the united states

USDA-ARS?s Scientific Manuscript database

Information systems supporting the delivery of conservation technical assistance by the United States Department of Agriculture (USDA) to agricultural producers on working lands have become increasingly complex over the past 25 years. They are constrained by inconsistent coordination of domain knowl...

Promoting Teachers' Learning and Knowledge Building in a Socio-Technical System

ERIC Educational Resources Information Center

Tammets, Kairit; Pata, Kai; Laanpere, Mart

2013-01-01

The study proposes a way in which the learning and knowledge building (LKB) framework, which is consistent with the knowledge conversion phases proposed by Nonaka and Takeuchi, supports teachers' informal and self-directed workplace learning. An LKB framework in a socio-technical system was developed to support professional development in an…

Ground Water Technical Support Center (GWTSC) Annual Report FY 2012: October 2011 – September 2012

EPA Science Inventory

The Ground Water Technical Support Center (GWTSC) is part of the Ground Water and Ecosystems Restoration Division (GWERD), which is based in the Robert S. Kerr Environmental Research Center in Ada, Oklahoma. The GWERD is a research division of U.S. EPA's National Risk Management...

A consumer guide: tools to manage vegetation and fuels.

Treesearch

David L. Peterson; Louisa Evers; Rebecca A. Gravenmier; Ellen Eberhardt

2007-01-01

Current efforts to improve the scientific basis for fire management on public lands will benefit from more efficient transfer of technical information and tools that support planning, implementation, and effectiveness of vegetation and hazardous fuel treatments. The technical scope, complexity, and relevant spatial scale of analytical and decision support tools differ...

Friend or Foe? New Managerialism and Technical, Administrative and Clerical Support Staff in Australian Universities

ERIC Educational Resources Information Center

Pick, David; Teo, Stephen; Yeung, Melissa

2012-01-01

The aim of this paper is to assess and conceptualise the effects of new managerialism-related organisational reforms in three Australian public universities on technical, administrative and clerical support staff job stressors and job satisfaction. Using a mixed method approach consisting of a quantitative core component and qualitative…

7 CFR 653.4 - Availability of technical standards.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 6 2010-01-01 2010-01-01 false Availability of technical standards. 653.4 Section 653.4 Agriculture Regulations of the Department of Agriculture (Continued) NATURAL RESOURCES CONSERVATION SERVICE, DEPARTMENT OF AGRICULTURE SUPPORT ACTIVITIES TECHNICAL STANDARDS § 653.4 Availability of...

A Guide to Locating Technical Reports in U.S. Government Publications Collections. Metrodocs Monograph One. First Edition.

ERIC Educational Resources Information Center

Hardick, Mary

This guide is designed to provide aid and support to library staff in finding government scientific and technical reports. Following an introduction to bibliographic sources for the technical report literature, the guide outlines a general search strategy for the retrieval of technical reports and presents an overview of the following five major…

Technical Assistance From State Health Departments for Communities Engaged in Policy, Systems, and Environmental Change: The ACHIEVE Program

PubMed Central

Hefelfinger, Jenny; Patty, Alice; Ussery, Ann

2013-01-01

Introduction This study assessed the value of technical assistance provided by state health department expert advisors and by the staff of the National Association of Chronic Disease Directors (NACDD) to community groups that participated in the Action Communities for Health, Innovation, and Environmental Change (ACHIEVE) Program, a CDC-funded health promotion program. Methods We analyzed quantitative and qualitative data reported by community project coordinators to assess the nature and value of technical assistance provided by expert advisors and NACDD staff and the usefulness of ACHIEVE resources in the development and implementation of community action plans. A grounded theory approach was used to analyze and categorize phrases in text data provided by community coordinators. Open coding placed conceptual labels on text phrases. Frequency distributions of the quantitative data are described and discussed. Results The most valuable technical assistance and program support resources were those determined to be in the interpersonal domain (ie, interactions with state expert advisors, NACDD staff, and peer-to-peer support). The most valuable technical assistance events were action institutes, coaches’ meetings, webinars, and technical assistance conference calls. Conclusion This analysis suggests that ACHIEVE communities valued the management and training assistance provided by expert advisors and NACDD staff. State health department expert advisors provided technical guidance and support, including such skills or knowledge-based services as best-practice strategies, review and discussion of community assessment data, sustainability planning, and identification of possible funding opportunities. NACDD staff led development and implementation of technical assistance events. PMID:24157078

Nitric oxide alterations following acute ductal constriction in the fetal lamb: a role for superoxide

PubMed Central

Hsu, Jong-Hau; Oishi, Peter; Wiseman, Dean A.; Hou, Yali; Chikovani, Omar; Datar, Sanjeev; Sajti, Eniko; Johengen, Michael J.; Harmon, Cynthia; Black, Stephen M.

2010-01-01

Acute partial compression of the fetal ductus arteriosus (DA) results in an initial abrupt increase in pulmonary blood flow (PBF), which is followed by a significant reduction in PBF to baseline values over the ensuing 2–4 h. We have previously demonstrated that this potent vasoconstricting response is due, in part, to an endothelin-1 (ET-1)-mediated decrease in nitric oxide synthase (NOS) activity. In addition, in vitro data demonstrate that ET-1 increases superoxide levels in pulmonary arterial smooth muscle cells and that oxidative stress alters NOS activity. Therefore, the objectives of this study were to determine the potential role of superoxide in the alterations of hemodynamics and NOS activity following acute ductal constriction in the late-gestation fetal lamb. Eighteen anesthetized near-term fetal lambs were instrumented, and a lung biopsy was performed. After a 48-h recovery, acute constriction of the DA was performed by inflating a vascular occluder. Polyethylene glycol-superoxide dismutase (PEG-SOD; 1,000–1,500 units/kg, n = 7) or PEG-alone (vehicle control group, n = 5) was injected into the pulmonary artery before ductal constriction. Six animals had a sham operation. In PEG-alone-treated lambs, acute ductal constriction rapidly decreased pulmonary vascular resistance (PVR) by 88%. However, by 4 h, PVR returned to preconstriction baseline. This vasoconstriction was associated with an increase in lung superoxide levels (82%), a decrease in total NOS activity (50%), and an increase in P-eNOS-Thr495 (52%) (P < 0.05). PEG-SOD prevented the increase of superoxide after ductal constriction, attenuated the vasoconstriction, preserved NOS activity, and increased P-eNOS Ser1177 (307%, P < 0.05). Sham procedure induced no changes. These data suggest that an acute decrease in NOS activity that is mediated, in part, by increased superoxide levels, and alterations in the phosphorylation status of the endothelial NOS isoform, underlie the pulmonary vascular response to acute ductal constriction. PMID:20363848

Tracking urban carbon footprints from production and consumption perspectives

NASA Astrophysics Data System (ADS)

Lin, Jianyi; Hu, Yuanchao; Cui, Shenghui; Kang, Jiefeng; Ramaswami, Anu

2015-05-01

Cities are hotspots of socio-economic activities and greenhouse gas emissions. The aim of this study was to extend the research range of the urban carbon footprint (CF) to cover emissions embodied in products traded among regions and intra-city sectors. Using Xiamen City as a study case, the total urban-related emissions were evaluated, and the carbon flows among regions and intra-city sectors were tracked. Then five urban CF accountings were evaluated, including purely geographic accounting (PGA), community-wide infrastructure footprint (CIF), and consumption-based footprint (CBF) methods, as well as the newly defined production-based footprint (PBF) and purely production footprint (PPF). Research results show that the total urban-related emissions of Xiamen City in 2010 were 55.2 Mt CO2e/y, of which total carbon flow among regions or intra-city sectors accounted for 53.7 Mt CO2e/y. Within the total carbon flow, import and export respectively accounted for 59 and 65%, highlighting the importance of emissions embodied in trade. By regional trade balance, North America and Europe were the largest net carbon exported-to regions, and Mainland China and Taiwan the largest net carbon imported-from regions. Among intra-sector carbon flows, manufacturing was the largest emission-consuming sector of the total urban carbon flow, accounting for 77.4, and 98% of carbon export was through industrial products trade. By the PBF, PPF, CIF, PGA and CBF methods, the urban CFs were respectively 53.7 Mt CO2e/y, 44.8 Mt CO2e/y, 28.4 Mt CO2e/y, 23.7 Mt CO2e/y, and 19.0 Mt CO2e/y, so all of the other four CFs were higher than the CBF. All of these results indicate that urban carbon mitigation must consider the supply chain management of imported goods, the production efficiency within the city, the consumption patterns of urban consumers, and the responsibility of the ultimate consumers outside the city.

Household costs and time to seek care for pregnancy related complications: The role of results-based financing

PubMed Central

Chinkhumba, Jobiba; De Allegri, Manuela; Mazalale, Jacob; Brenner, Stephan; Mathanga, Don; Muula, Adamson S.; Robberstad, Bjarne

2017-01-01

Results-based financing (RBF) schemes–including performance based financing (PBF) and conditional cash transfers (CCT)-are increasingly being used to encourage use and improve quality of institutional health care for pregnant women in order to reduce maternal and neonatal mortality in low-income countries. While there is emerging evidence that RBF can increase service use and quality, little is known on the impact of RBF on costs and time to seek care for obstetric complications, although the two represent important dimensions of access. We conducted this study to fill the existing gap in knowledge by investigating the impact of RBF (PBF+CCT) on household costs and time to seek care for obstetric complications in four districts in Malawi. The analysis included data on 2,219 women with obstetric complications from three waves of a population-based survey conducted at baseline in 2013 and repeated in 2014(midline) and 2015(endline). Using a before and after approach with controls, we applied generalized linear models to study the association between RBF and household costs and time to seek care. Results indicated that receipt of RBF was associated with a significant reduction in the expected mean time to seek care for women experiencing an obstetric complication. Relative to non-RBF, time to seek care in RBF areas decreased by 27.3% (95%CI: 28.4–25.9) at midline and 34.2% (95%CI: 37.8–30.4) at endline. No substantial change in household costs was observed. We conclude that the reduced time to seek care is a manifestation of RBF induced quality improvements, prompting faster decisions on care seeking at household level. Our results suggest RBF may contribute to timely emergency care seeking and thus ultimately reduce maternal and neonatal mortality in beneficiary populations. PMID:28934320

RE: Request for Correction, Technical Support Document, Greenhouse Gas Emissions Reporting from the Petroleum and Natural Gas Industry

EPA Pesticide Factsheets

The Industrial Energy Consumers of America (IECA) joins the U.S. Chamber of Commerce in its request for correction of information developed by the Environmental Protection Agency (EPA) in a background technical support document titled Greenhouse Gas Emissions Reporting from the Petroleum and Natural Gas Industry

129. ARAII Administrative and technical support building (ARA606) sections showing ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

129. ARA-II Administrative and technical support building (ARA-606) sections showing roof and wall details and longitudinal section. C.A. Sundberg and Associates 866-area/ALPR-606-A-5. Date: May 1958. Ineel index code no. 070-0606-00-822-102828. - Idaho National Engineering Laboratory, Army Reactors Experimental Area, Scoville, Butte County, ID

128. ARAII Administrative and technical support building (ARA606) elevations for ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

128. ARA-II Administrative and technical support building (ARA-606) elevations for northwest, southwest, northeast, and southeast sides. C.A. Sundberg and Associates 866-area/ALPR-606-A-3. Date: May 1958. Ineel index code no. 070-0606-00-822-102826. - Idaho National Engineering Laboratory, Army Reactors Experimental Area, Scoville, Butte County, ID

78 FR 77721 - Office of Small Credit Unions (OSCUI) Grant Program Access for Credit Unions

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-24

... any success or failure to meet objectives for use of proceeds, outcome, or impact. NCUA, in its sole... availability. The OSCUI Grant Program serves as a source of financial support, in the form of technical... provides financial support in the form of technical assistance grants to LICUs. These funds help improve...

Technical Adequacy and Acceptability of Curriculum-Based Measurement and the Measures of Academic Progress

ERIC Educational Resources Information Center

January, Stacy-Ann A.; Ardoin, Scott P.

2015-01-01

Curriculum-based measurement in reading (CBM-R) and the Measures of Academic Progress (MAP) are assessment tools widely employed for universal screening in schools. Although a large body of research supports the validity of CBM-R, limited empirical evidence exists supporting the technical adequacy of MAP or the acceptability of either measure for…

Process Hood Stand Support Steel

DOE Office of Scientific and Technical Information (OSTI.GOV)

VAN KATWIJK, C.

2000-04-03

This package is written to comply with EN-6-035-00 for upgrade dedication of commercial grade items (CGI). The SNF-5953 CGI package provides the Technical evaluation to identify the critical characteristics and the acceptance criteria associated with the safety function of the Hood Stand Support Steel. Completion of the technical and quality requirements identified in the dedication package will provide enough data to be reasonably assured that CGI Hood Stand Support Steel will perform its SC function.

Technical Support Document for Version 3.9.0 of the COMcheck Software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bartlett, Rosemarie; Connell, Linda M.; Gowri, Krishnan

2011-09-01

COMcheck provides an optional way to demonstrate compliance with commercial and high-rise residential building energy codes. Commercial buildings include all use groups except single family and multifamily not over three stories in height. COMcheck was originally based on ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989) requirements and is intended for use with various codes based on Standard 90.1, including the Codification of ASHRAE/IES Standard 90.1-1989 (90.1-1989 Code) (ASHRAE 1989a, 1993b) and ASHRAE/IESNA Standard 90.1-1999 (Standard 90.1-1999). This includes jurisdictions that have adopted the 90.1-1989 Code, Standard 90.1-1989, Standard 90.1-1999, or their own code based on one of these. We view Standard 90.1-1989more » and the 90.1-1989 Code as having equivalent technical content and have used both as source documents in developing COMcheck. This technical support document (TSD) is designed to explain the technical basis for the COMcheck software as originally developed based on the ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989). Documentation for other national model codes and standards and specific state energy codes supported in COMcheck has been added to this report as appendices. These appendices are intended to provide technical documentation for features specific to the supported codes and for any changes made for state-specific codes that differ from the standard features that support compliance with the national model codes and standards. Beginning with COMcheck version 3.8.0, support for 90.1-1989, 90.1-1999, and the 1998 IECC are no longer included, but those sections remain in this document for reference purposes.« less

The National Geospatial Technical Operations Center

USGS Publications Warehouse

Craun, Kari J.; Constance, Eric W.; Donnelly, Jay; Newell, Mark R.

2009-01-01

The United States Geological Survey (USGS) National Geospatial Technical Operations Center (NGTOC) provides geospatial technical expertise in support of the National Geospatial Program in its development of The National Map, National Atlas of the United States, and implementation of key components of the National Spatial Data Infrastructure (NSDI).