Digital Video of Live-Scan Fingerprint Data

National Institute of Standards and Technology Data Gateway

NIST Digital Video of Live-Scan Fingerprint Data (PC database for purchase)   NIST Special Database 24 contains MPEG-2 (Moving Picture Experts Group) compressed digital video of live-scan fingerprint data. The database is being distributed for use in developing and testing of fingerprint verification systems.

Comparison of precision and speed in laparoscopic and robot-assisted surgical task performance.

PubMed

Zihni, Ahmed; Gerull, William D; Cavallo, Jaime A; Ge, Tianjia; Ray, Shuddhadeb; Chiu, Jason; Brunt, L Michael; Awad, Michael M

2018-03-01

Robotic platforms have the potential advantage of providing additional dexterity and precision to surgeons while performing complex laparoscopic tasks, especially for those in training. Few quantitative evaluations of surgical task performance comparing laparoscopic and robotic platforms among surgeons of varying experience levels have been done. We compared measures of quality and efficiency of Fundamentals of Laparoscopic Surgery task performance on these platforms in novices and experienced laparoscopic and robotic surgeons. Fourteen novices, 12 expert laparoscopic surgeons (>100 laparoscopic procedures performed, no robotics experience), and five expert robotic surgeons (>25 robotic procedures performed) performed three Fundamentals of Laparoscopic Surgery tasks on both laparoscopic and robotic platforms: peg transfer (PT), pattern cutting (PC), and intracorporeal suturing. All tasks were repeated three times by each subject on each platform in a randomized order. Mean completion times and mean errors per trial (EPT) were calculated for each task on both platforms. Results were compared using Student's t-test (P < 0.05 considered statistically significant). Among novices, greater errors were noted during laparoscopic PC (Lap 2.21 versus Robot 0.88 EPT, P < 0.001). Among expert laparoscopists, greater errors were noted during laparoscopic PT compared with robotic (PT: Lap 0.14 versus Robot 0.00 EPT, P = 0.04). Among expert robotic surgeons, greater errors were noted during laparoscopic PC compared with robotic (Lap 0.80 versus Robot 0.13 EPT, P = 0.02). Among expert laparoscopists, task performance was slower on the robotic platform compared with laparoscopy. In comparisons of expert laparoscopists performing tasks on the laparoscopic platform and expert robotic surgeons performing tasks on the robotic platform, expert robotic surgeons demonstrated fewer errors during the PC task (P = 0.009). Robotic assistance provided a reduction in errors at all experience levels for some laparoscopic tasks, but no benefit in the speed of task performance. Robotic assistance may provide some benefit in precision of surgical task performance. Copyright © 2017 Elsevier Inc. All rights reserved.

CLIPS - C LANGUAGE INTEGRATED PRODUCTION SYSTEM (IBM PC VERSION)

NASA Technical Reports Server (NTRS)

Riley, G.

1994-01-01

The C Language Integrated Production System, CLIPS, is a shell for developing expert systems. It is designed to allow artificial intelligence research, development, and delivery on conventional computers. The primary design goals for CLIPS are portability, efficiency, and functionality. For these reasons, the program is written in C. CLIPS meets or outperforms most micro- and minicomputer based artificial intelligence tools. CLIPS is a forward chaining rule-based language. The program contains an inference engine and a language syntax that provide a framework for the construction of an expert system. It also includes tools for debugging an application. CLIPS is based on the Rete algorithm, which enables very efficient pattern matching. The collection of conditions and actions to be taken if the conditions are met is constructed into a rule network. As facts are asserted either prior to or during a session, CLIPS pattern-matches the number of fields. Wildcards and variables are supported for both single and multiple fields. CLIPS syntax allows the inclusion of externally defined functions (outside functions which are written in a language other than CLIPS). CLIPS itself can be embedded in a program such that the expert system is available as a simple subroutine call. Advanced features found in CLIPS version 4.3 include an integrated microEMACS editor, the ability to generate C source code from a CLIPS rule base to produce a dedicated executable, binary load and save capabilities for CLIPS rule bases, and the utility program CRSV (Cross-Reference, Style, and Verification) designed to facilitate the development and maintenance of large rule bases. Five machine versions are available. Each machine version includes the source and the executable for that machine. The UNIX version includes the source and binaries for IBM RS/6000, Sun3 series, and Sun4 series computers. The UNIX, DEC VAX, and DEC RISC Workstation versions are line oriented. The PC version and the Macintosh version each contain a windowing variant of CLIPS as well as the standard line oriented version. The mouse/window interface version for the PC works with a Microsoft compatible mouse or without a mouse. This window version uses the proprietary CURSES library for the PC, but a working executable of the window version is provided. The window oriented version for the Macintosh includes a version which uses a full Macintosh-style interface, including an integrated editor. This version allows the user to observe the changing fact base and rule activations in separate windows while a CLIPS program is executing. The IBM PC version is available bundled with CLIPSITS, The CLIPS Intelligent Tutoring System for a special combined price (COS-10025). The goal of CLIPSITS is to provide the student with a tool to practice the syntax and concepts covered in the CLIPS User's Guide. It attempts to provide expert diagnosis and advice during problem solving which is typically not available without an instructor. CLIPSITS is divided into 10 lessons which mirror the first 10 chapters of the CLIPS User's Guide. The program was developed for the IBM PC series with a hard disk. CLIPSITS is also available separately as MSC-21679. The CLIPS program is written in C for interactive execution and has been implemented on an IBM PC computer operating under DOS, a Macintosh and DEC VAX series computers operating under VMS or ULTRIX. The line oriented version should run on any computer system which supports a full (Kernighan and Ritchie) C compiler or the ANSI standard C language. CLIPS was developed in 1986 and Version 4.2 was released in July of 1988. Version 4.3 was released in June of 1989.

CLIPS - C LANGUAGE INTEGRATED PRODUCTION SYSTEM (IBM PC VERSION WITH CLIPSITS)

NASA Technical Reports Server (NTRS)

Riley, , .

1994-01-01

The C Language Integrated Production System, CLIPS, is a shell for developing expert systems. It is designed to allow artificial intelligence research, development, and delivery on conventional computers. The primary design goals for CLIPS are portability, efficiency, and functionality. For these reasons, the program is written in C. CLIPS meets or outperforms most micro- and minicomputer based artificial intelligence tools. CLIPS is a forward chaining rule-based language. The program contains an inference engine and a language syntax that provide a framework for the construction of an expert system. It also includes tools for debugging an application. CLIPS is based on the Rete algorithm, which enables very efficient pattern matching. The collection of conditions and actions to be taken if the conditions are met is constructed into a rule network. As facts are asserted either prior to or during a session, CLIPS pattern-matches the number of fields. Wildcards and variables are supported for both single and multiple fields. CLIPS syntax allows the inclusion of externally defined functions (outside functions which are written in a language other than CLIPS). CLIPS itself can be embedded in a program such that the expert system is available as a simple subroutine call. Advanced features found in CLIPS version 4.3 include an integrated microEMACS editor, the ability to generate C source code from a CLIPS rule base to produce a dedicated executable, binary load and save capabilities for CLIPS rule bases, and the utility program CRSV (Cross-Reference, Style, and Verification) designed to facilitate the development and maintenance of large rule bases. Five machine versions are available. Each machine version includes the source and the executable for that machine. The UNIX version includes the source and binaries for IBM RS/6000, Sun3 series, and Sun4 series computers. The UNIX, DEC VAX, and DEC RISC Workstation versions are line oriented. The PC version and the Macintosh version each contain a windowing variant of CLIPS as well as the standard line oriented version. The mouse/window interface version for the PC works with a Microsoft compatible mouse or without a mouse. This window version uses the proprietary CURSES library for the PC, but a working executable of the window version is provided. The window oriented version for the Macintosh includes a version which uses a full Macintosh-style interface, including an integrated editor. This version allows the user to observe the changing fact base and rule activations in separate windows while a CLIPS program is executing. The IBM PC version is available bundled with CLIPSITS, The CLIPS Intelligent Tutoring System for a special combined price (COS-10025). The goal of CLIPSITS is to provide the student with a tool to practice the syntax and concepts covered in the CLIPS User's Guide. It attempts to provide expert diagnosis and advice during problem solving which is typically not available without an instructor. CLIPSITS is divided into 10 lessons which mirror the first 10 chapters of the CLIPS User's Guide. The program was developed for the IBM PC series with a hard disk. CLIPSITS is also available separately as MSC-21679. The CLIPS program is written in C for interactive execution and has been implemented on an IBM PC computer operating under DOS, a Macintosh and DEC VAX series computers operating under VMS or ULTRIX. The line oriented version should run on any computer system which supports a full (Kernighan and Ritchie) C compiler or the ANSI standard C language. CLIPS was developed in 1986 and Version 4.2 was released in July of 1988. Version 4.3 was released in June of 1989.

Spacelab data processing facility (SLDPF) quality assurance (QA)/data accounting (DA) expert systems - Transition from prototypes to operational systems

NASA Technical Reports Server (NTRS)

Basile, Lisa

1988-01-01

The SLDPF is responsible for the capture, quality monitoring processing, accounting, and shipment of Spacelab and/or Attached Shuttle Payloads (ASP) telemetry data to various user facilities. Expert systems will aid in the performance of the quality assurance and data accounting functions of the two SLDPF functional elements: the Spacelab Input Processing System (SIPS) and the Spacelab Output Processing System (SOPS). Prototypes were developed for each as independent efforts. The SIPS Knowledge System Prototype (KSP) used the commercial shell OPS5+ on an IBM PC/AT; the SOPS Expert System Prototype used the expert system shell CLIPS implemented on a Macintosh personal computer. Both prototypes emulate the duties of the respective QA/DA analysts based upon analyst input and predetermined mission criteria parameters, and recommended instructions and decisions governing the reprocessing, release, or holding for further analysis of data. These prototypes demonstrated feasibility and high potential for operational systems. Increase in productivity, decrease of tedium, consistency, concise historical records, and a training tool for new analyses were the principal advantages. An operational configuration, taking advantage of the SLDPF network capabilities, is under development with the expert systems being installed on SUN workstations. This new configuration in conjunction with the potential of the expert systems will enhance the efficiency, in both time and quality, of the SLDPF's release of Spacelab/AST data products.

Spacelab data processing facility (SLDPF) Quality Assurance (QA)/Data Accounting (DA) expert systems: Transition from prototypes to operational systems

NASA Technical Reports Server (NTRS)

Basile, Lisa

1988-01-01

The SLDPF is responsible for the capture, quality monitoring processing, accounting, and shipment of Spacelab and/or Attached Shuttle Payloads (ASP) telemetry data to various user facilities. Expert systems will aid in the performance of the quality assurance and data accounting functions of the two SLDPF functional elements: the Spacelab Input Processing System (SIPS) and the Spacelab Output Processing System (SOPS). Prototypes were developed for each as independent efforts. The SIPS Knowledge System Prototype (KSP) used the commercial shell OPS5+ on an IBM PC/AT; the SOPS Expert System Prototype used the expert system shell CLIPS implemented on a Macintosh personal computer. Both prototypes emulate the duties of the respective QA/DA analysts based upon analyst input and predetermined mission criteria parameters, and recommended instructions and decisions governing the reprocessing, release, or holding for further analysis of data. These prototypes demonstrated feasibility and high potential for operational systems. Increase in productivity, decrease of tedium, consistency, concise historial records, and a training tool for new analyses were the principal advantages. An operational configuration, taking advantage of the SLDPF network capabilities, is under development with the expert systems being installed on SUN workstations. This new configuration in conjunction with the potential of the expert systems will enhance the efficiency, in both time and quality, of the SLDPF's release of Spacelab/AST data products.

The integrated proactive surveillance system for prostate cancer.

PubMed

Wang, Haibin; Yatawara, Mahendra; Huang, Shao-Chi; Dudley, Kevin; Szekely, Christine; Holden, Stuart; Piantadosi, Steven

2012-01-01

In this paper, we present the design and implementation of the integrated proactive surveillance system for prostate cancer (PASS-PC). The integrated PASS-PC is a multi-institutional web-based system aimed at collecting a variety of data on prostate cancer patients in a standardized and efficient way. The integrated PASS-PC was commissioned by the Prostate Cancer Foundation (PCF) and built through the joint of efforts by a group of experts in medical oncology, genetics, pathology, nutrition, and cancer research informatics. Their main goal is facilitating the efficient and uniform collection of critical demographic, lifestyle, nutritional, dietary and clinical information to be used in developing new strategies in diagnosing, preventing and treating prostate cancer.The integrated PASS-PC is designed based on common industry standards - a three tiered architecture and a Service- Oriented Architecture (SOA). It utilizes open source software and programming languages such as HTML, PHP, CSS, JQuery, Drupal and MySQL. We also use a commercial database management system - Oracle 11g. The integrated PASS-PC project uses a "confederation model" that encourages participation of any interested center, irrespective of its size or location. The integrated PASS-PC utilizes a standardized approach to data collection and reporting, and uses extensive validation procedures to prevent entering erroneous data. The integrated PASS-PC controlled vocabulary is harmonized with the National Cancer Institute (NCI) Thesaurus. Currently, two cancer centers in the USA are participating in the integrated PASS-PC project.THE FINAL SYSTEM HAS THREE MAIN COMPONENTS: 1. National Prostate Surveillance Network (NPSN) website; 2. NPSN myConnect portal; 3. Proactive Surveillance System for Prostate Cancer (PASS-PC). PASS-PC is a cancer Biomedical Informatics Grid (caBIG) compatible product. The integrated PASS-PC provides a foundation for collaborative prostate cancer research. It has been built to meet the short term goal of gathering prostate cancer related data, but also with the prerequisites in place for future evolution into a cancer research informatics platform. In the future this will be vital for successful prostate cancer studies, care and treatment.

The Integrated Proactive Surveillance System for Prostate Cancer

PubMed Central

Wang, Haibin; Yatawara, Mahendra; Huang, Shao-Chi; Dudley, Kevin; Szekely, Christine; Holden, Stuart; Piantadosi, Steven

2012-01-01

In this paper, we present the design and implementation of the integrated proactive surveillance system for prostate cancer (PASS-PC). The integrated PASS-PC is a multi-institutional web-based system aimed at collecting a variety of data on prostate cancer patients in a standardized and efficient way. The integrated PASS-PC was commissioned by the Prostate Cancer Foundation (PCF) and built through the joint of efforts by a group of experts in medical oncology, genetics, pathology, nutrition, and cancer research informatics. Their main goal is facilitating the efficient and uniform collection of critical demographic, lifestyle, nutritional, dietary and clinical information to be used in developing new strategies in diagnosing, preventing and treating prostate cancer. The integrated PASS-PC is designed based on common industry standards – a three tiered architecture and a Service- Oriented Architecture (SOA). It utilizes open source software and programming languages such as HTML, PHP, CSS, JQuery, Drupal and MySQL. We also use a commercial database management system – Oracle 11g. The integrated PASS-PC project uses a “confederation model” that encourages participation of any interested center, irrespective of its size or location. The integrated PASS-PC utilizes a standardized approach to data collection and reporting, and uses extensive validation procedures to prevent entering erroneous data. The integrated PASS-PC controlled vocabulary is harmonized with the National Cancer Institute (NCI) Thesaurus. Currently, two cancer centers in the USA are participating in the integrated PASS-PC project. The final system has three main components: 1. National Prostate Surveillance Network (NPSN) website; 2. NPSN myConnect portal; 3. Proactive Surveillance System for Prostate Cancer (PASS-PC). PASS-PC is a cancer Biomedical Informatics Grid (caBIG) compatible product. The integrated PASS-PC provides a foundation for collaborative prostate cancer research. It has been built to meet the short term goal of gathering prostate cancer related data, but also with the prerequisites in place for future evolution into a cancer research informatics platform. In the future this will be vital for successful prostate cancer studies, care and treatment. PMID:22505956

PC-SPES (PDQ®)—Health Professional Version

Cancer.gov

Expert-reviewed information summary about the use of PC-SPES as a treatment for prostate cancer. Note: The information in this summary is no longer being updated and is provided for reference purposes only.

PC-SPES (PDQ®)—Patient Version

Cancer.gov

Expert-reviewed information summary about the use of PC-SPES as a treatment for prostate cancer. Note: The information in this summary is no longer being updated and is provided for reference purposes only.

System control module diagnostic Expert Assistant

NASA Technical Reports Server (NTRS)

Flores, Luis M.; Hansen, Roger F.

1990-01-01

The Orbiter EXperiments (OEX) Program was established by NASA's Office of Aeronautics and Space Technology (OAST) to accomplish the precise data collection necessary to support a complete and accurate assessment of Space Transportation System (STS) Orbiter performance during all phases of a mission. During a mission, data generated by the various experiments are conveyed to the OEX System Control Module (SCM) which arranges for and monitors storage of the data on the OEX tape recorder. The SCM Diagnostic Expert Assistant (DEA) is an expert system which provides on demand advice to technicians performing repairs of a malfunctioning SCM. The DEA is a self-contained, data-driven knowledge-based system written in the 'C' Language Production System (CLIPS) for a portable micro-computer of the IBM PC/XT class. The DEA reasons about SCM hardware faults at multiple levels; the most detailed layer of encoded knowledge of the SCM is a representation of individual components and layouts of the custom-designed component boards.

CLIPS - C LANGUAGE INTEGRATED PRODUCTION SYSTEM (MACINTOSH VERSION)

NASA Technical Reports Server (NTRS)

Culbert, C.

1994-01-01

The C Language Integrated Production System, CLIPS, is a shell for developing expert systems. It is designed to allow artificial intelligence research, development, and delivery on conventional computers. The primary design goals for CLIPS are portability, efficiency, and functionality. For these reasons, the program is written in C. CLIPS meets or outperforms most micro- and minicomputer based artificial intelligence tools. CLIPS is a forward chaining rule-based language. The program contains an inference engine and a language syntax that provide a framework for the construction of an expert system. It also includes tools for debugging an application. CLIPS is based on the Rete algorithm, which enables very efficient pattern matching. The collection of conditions and actions to be taken if the conditions are met is constructed into a rule network. As facts are asserted either prior to or during a session, CLIPS pattern-matches the number of fields. Wildcards and variables are supported for both single and multiple fields. CLIPS syntax allows the inclusion of externally defined functions (outside functions which are written in a language other than CLIPS). CLIPS itself can be embedded in a program such that the expert system is available as a simple subroutine call. Advanced features found in CLIPS version 4.3 include an integrated microEMACS editor, the ability to generate C source code from a CLIPS rule base to produce a dedicated executable, binary load and save capabilities for CLIPS rule bases, and the utility program CRSV (Cross-Reference, Style, and Verification) designed to facilitate the development and maintenance of large rule bases. Five machine versions are available. Each machine version includes the source and the executable for that machine. The UNIX version includes the source and binaries for IBM RS/6000, Sun3 series, and Sun4 series computers. The UNIX, DEC VAX, and DEC RISC Workstation versions are line oriented. The PC version and the Macintosh version each contain a windowing variant of CLIPS as well as the standard line oriented version. The mouse/window interface version for the PC works with a Microsoft compatible mouse or without a mouse. This window version uses the proprietary CURSES library for the PC, but a working executable of the window version is provided. The window oriented version for the Macintosh includes a version which uses a full Macintosh-style interface, including an integrated editor. This version allows the user to observe the changing fact base and rule activations in separate windows while a CLIPS program is executing. The IBM PC version is available bundled with CLIPSITS, The CLIPS Intelligent Tutoring System for a special combined price (COS-10025). The goal of CLIPSITS is to provide the student with a tool to practice the syntax and concepts covered in the CLIPS User's Guide. It attempts to provide expert diagnosis and advice during problem solving which is typically not available without an instructor. CLIPSITS is divided into 10 lessons which mirror the first 10 chapters of the CLIPS User's Guide. The program was developed for the IBM PC series with a hard disk. CLIPSITS is also available separately as MSC-21679. The CLIPS program is written in C for interactive execution and has been implemented on an IBM PC computer operating under DOS, a Macintosh and DEC VAX series computers operating under VMS or ULTRIX. The line oriented version should run on any computer system which supports a full (Kernighan and Ritchie) C compiler or the ANSI standard C language. CLIPS was developed in 1986 and Version 4.2 was released in July of 1988. Version 4.3 was released in June of 1989.

The role of genetics in improving forest health

Treesearch

Mary F. Mahalovich

1995-01-01

An often ignored tool to improve forest health is the application of genetics-Tree improvement programs in the Inland West utilize genetic principles to develop-seed transfer guidelines to avoid the problems associated with off-site plantings and to improve characteristics in conifers related to forest health. PC-based expert systems have been developed to aid in seed...

Living Color Frame System: PC graphics tool for data visualization

NASA Technical Reports Server (NTRS)

Truong, Long V.

1993-01-01

Living Color Frame System (LCFS) is a personal computer software tool for generating real-time graphics applications. It is highly applicable for a wide range of data visualization in virtual environment applications. Engineers often use computer graphics to enhance the interpretation of data under observation. These graphics become more complicated when 'run time' animations are required, such as found in many typical modern artificial intelligence and expert systems. Living Color Frame System solves many of these real-time graphics problems.

Predicate calculus, artificial intelligence, and workers' compensation.

PubMed

Harber, P; McCoy, J M

1989-05-01

Application of principles of predicate calculus (PC) and artificial intelligence (AI) search methods to occupational medicine can meet several goals. First, they can improve understanding of the diagnostic process and recognition of the sources of uncertainty in knowledge and in case specific information. Second, PC provides a rational means of resolving differences in conclusion based upon the same premises. Third, understanding of these principles allows separation of knowledge (facts) from the process by which they are used and therefore facilitates development of AI-based expert systems. Application of PC to recognizing causation of pulmonary fibrosis is demonstrated in this paper, providing a method that can be generalized to other problems in occupational medicine. Application of PC and understanding of AI search routines may be particularly applicable to workers' compensation where explicit statement of rational and inferential process is necessary. This approach is useful in the diagnosis of occupational lung disease and may be particularly valuable in workers' compensation considerations, wherein explicit statement of rationale is needed.

Training the Workforce: Description of a Longitudinal Interdisciplinary Education and Mentoring Program in Palliative Care.

PubMed

Levine, Stacie; O'Mahony, Sean; Baron, Aliza; Ansari, Aziz; Deamant, Catherine; Frader, Joel; Leyva, Ileana; Marschke, Michael; Preodor, Michael

2017-04-01

The rapid increase in demand for palliative care (PC) services has led to concerns regarding workforce shortages and threats to the resiliency of PC teams. To describe the development, implementation, and evaluation of a regional interdisciplinary training program in PC. Thirty nurse and physician fellows representing 22 health systems across the Chicago region participated in a two-year PC training program. The curriculum was delivered through multiple conferences, self-directed e-learning, and individualized mentoring by expert local faculty (mentors). Fellows shadowed mentors' clinical practices and received guidance on designing, implementing, and evaluating a practice improvement project to address gaps in PC at their institutions. Enduring, interdisciplinary relationships were built at all levels across health care organizations. Fellows made significant increases in knowledge and self-reported confidence in adult and pediatric PC and program development skills and frequency performing these skills. Fellows and mentors reported high satisfaction with the educational program. This interdisciplinary PC training model addressed local workforce issues by increasing the number of clinicians capable of providing PC. Unique features include individualized longitudinal mentoring, interdisciplinary education, on-site project implementation, and local network building. Future research will address the impact of the addition of social work and chaplain trainees to the program. Copyright © 2017 American Academy of Hospice and Palliative Medicine. Published by Elsevier Inc. All rights reserved.

The Shrinkage Model And Expert System Of Plastic Lens Formation

NASA Astrophysics Data System (ADS)

Chang, Rong-Seng

1988-06-01

Shrinkage causes both the appearance & dimension defects of the injected plastic lens. We have built up a model of state equations with the help of finite element analysis program to estimate the volume change (shrinkage and swelling) under the combinations of injection variables such as pressure and temperature etc., then the personal computer expert system has been build up to make that knowledge conveniently available to the user in the model design, process planning, process operation and some other work. The domain knowledge is represented by a R-graph (Relationship-graph) model which states the relationships of variables & equations. This model could be compare with other models in the expert system. If the user has better model to solve the shrinkage problem, the program will evaluate it automatically and a learning file will be trigger by the expert system to teach the user to update their knowledge base and modify the old model by this better model. The Rubin's model and Gilmore's model have been input to the expert system. The conflict has been solved both from the user and the deeper knowledge base. A cube prism and the convex lens examples have been shown in this paper. This program is written by MULISP language in IBM PC-AT. The natural language provides English Explaination of know why and know how and the automatic English translation for the equation rules and the production rules.

Pneumocystis and Pneumocystosis: first meeting of experts from Latin-American and Portuguese-speaking countries - a mini-review.

PubMed

Esteves, Francisco; Medrano, Francisco J; de Armas, Yaxsier; Wissmann, Gustavo; Calderón, Enrique J; Matos, Olga

2014-05-01

The Pneumocystis and Pneumocystosis: first meeting of experts from Latin-American and Portuguese-speaking countries was held in Lisbon, Portugal, on 24-26 October 2013. A total of 20 speakers from Latin America, Africa and Europe participated in the meeting. The epidemiological studies presented in this meeting begin to change the misconception that since the AIDS epidemic, Pneumocystis pneumonia (PcP) has become an infrequent disease, showing that today PcP remains a major opportunistic infection in HIV-infected patients in both developed and developing countries and an emerging problem in immunocompromised patients without HIV infection worldwide. PcP management remains a challenge. Right now, the combination of caspofungin and trimethoprim-sulfamethoxazole (TMP-SMX) is a promising therapeutic approach that needs to be assessed in controlled clinical trials.

The SIGNAL expert system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Struve, R.

The SIGNAL insurance companies have developed an expert system for the support of its customer sales service. It was introduced at the end of 1993 and is currently used by approximately 500 customer service representatives. It involves a counseling system, which enables customer sales personnel to produce high-quality benefit analyses at the point of sale. It is not only an information system for the agent but involves the customer in an active role (through the implementation of sales talks, the conscious visualization of facts, the generation of natural language explanations etc.). Thus, the customer is not faced with a faitmore » accompli but is actively involved in solving the problem. To meet these requirements, several Al techniques are used, as described further below. The application has increased sales efficiency, optimized customer contact time and decreased training requirements. The system is developed with KEE (and reimplemented in Allegro CL/PC) and runs on notebooks with 8 MB RAM.« less

Development of a monitoring instrument to assess the performance of the Swiss primary care system.

PubMed

Ebert, Sonja T; Pittet, Valérie; Cornuz, Jacques; Senn, Nicolas

2017-11-29

The Swiss health system is customer-driven with fee-for-service paiement scheme and universal coverage. It is highly performing but expensive and health information systems are scarcely implemented. The Swiss Primary Care Active Monitoring (SPAM) program aims to develop an instrument able to describe the performance and effectiveness of the Swiss PC system. Based on a Literature review we developed a conceptual framework and selected indicators according to their ability to reflect the Swiss PC system. A two round modified RAND method with 24 inter-/national experts took place to select primary/secondary indicators (validity, clarity, agreement). A limited set of priority indicators was selected (importance, priority) in a third round. A conceptual framework covering three domains (structure, process, outcome) subdivided into twelve sections (funding, access, organisation/ workflow of resources, (Para-)Medical training, management of knowledge, clinical-/interpersonal care, health status, satisfaction of PC providers/ consumers, equity) was generated. 365 indicators were pre-selected and 335 were finally retained. 56 were kept as priority indicators.- Among the remaining, 199 were identified as primary and 80 as secondary indicators. All domains and sections are represented. The development of the SPAM program allowed the construction of a consensual instrument in a traditionally unregulated health system through a modified RAND method. The selected 56 priority indicators render the SPAM instrument a comprehensive tool supporting a better understanding of the Swiss PC system's performance and effectiveness as well as in identifying potential ways to improve quality of care. Further challenges will be to update indicators regularly and to assess validity and sensitivity-to-change over time.

Expert systems for fault diagnosis in nuclear reactor control

NASA Astrophysics Data System (ADS)

Jalel, N. A.; Nicholson, H.

1990-11-01

An expert system for accident analysis and fault diagnosis for the Loss Of Fluid Test (LOFT) reactor, a small scale pressurized water reactor, was developed for a personal computer. The knowledge of the system is presented using a production rule approach with a backward chaining inference engine. The data base of the system includes simulated dependent state variables of the LOFT reactor model. Another system is designed to assist the operator in choosing the appropriate cooling mode and to diagnose the fault in the selected cooling system. The response tree, which is used to provide the link between a list of very specific accident sequences and a set of generic emergency procedures which help the operator in monitoring system status, and to differentiate between different accident sequences and select the correct procedures, is used to build the system knowledge base. Both systems are written in TURBO PROLOG language and can be run on an IBM PC compatible with 640k RAM, 40 Mbyte hard disk and color graphics.

A data analysis expert system for large established distributed databases

NASA Technical Reports Server (NTRS)

Gnacek, Anne-Marie; An, Y. Kim; Ryan, J. Patrick

1987-01-01

A design for a natural language database interface system, called the Deductively Augmented NASA Management Decision support System (DANMDS), is presented. The DANMDS system components have been chosen on the basis of the following considerations: maximal employment of the existing NASA IBM-PC computers and supporting software; local structuring and storing of external data via the entity-relationship model; a natural easy-to-use error-free database query language; user ability to alter query language vocabulary and data analysis heuristic; and significant artificial intelligence data analysis heuristic techniques that allow the system to become progressively and automatically more useful.

Building a taxonomy of integrated palliative care initiatives: results from a focus group

PubMed Central

Ewert, Benjamin; Hodiamont, Farina; van Wijngaarden, Jeroen; Payne, Sheila; Groot, Marieke; Hasselaar, Jeroen; Menten, Johann; Radbruch, Lukas

2016-01-01

Background Empirical evidence suggests that integrated palliative care (IPC) increases the quality of care for palliative patients and supports professional caregivers. Existing IPC initiatives in Europe vary in their design and are hardly comparable. InSuP-C, a European Union research project, aimed to build a taxonomy of IPC initiatives applicable across diseases, healthcare sectors and systems. Methods The taxonomy of IPC initiatives was developed in cooperation with an international and multidisciplinary focus group of 18 experts. Subsequently, a consensus meeting of 10 experts revised a preliminary taxonomy and adopted the final classification system. Results Consisting of eight categories, with two to four items each, the taxonomy covers the process and structure of IPC initiatives. If two items in at least one category apply to an initiative, a minimum level of integration is assumed to have been reached. Categories range from the type of initiative (items: pathway, model or guideline) to patients’ key contact (items: non-pc specialist, pc specialist, general practitioner). Experts recommended the inclusion of two new categories: level of care (items: primary, secondary or tertiary) indicating at which stage palliative care is integrated and primary focus of intervention describing IPC givers’ different roles (items: treating function, advising/consulting or training) in the care process. Conclusions Empirical studies are required to investigate how the taxonomy is used in practice and whether it covers the reality of patients in need of palliative care. The InSuP-C project will test this taxonomy empirically in selected initiatives using IPC. PMID:26647043

1st Evidence-based Italian consensus conference on cytoreductive surgery and hyperthermic intraperitoneal chemotherapy for peritoneal carcinosis from ovarian cancer.

PubMed

Cavaliere, Davide; Cirocchi, Roberto; Coccolini, Federico; Fagotti, Anna; Fambrini, Massimiliano; Federici, Orietta; Lorusso, Domenica; Vaira, Marco; Ceresoli, Marco; Delrio, Paolo; Garofalo, Alfredo; Pignata, Sandro; Scollo, Paolo; Trojano, Vito; Amadori, Andrea; Ansaloni, Luca; Cariti, Giuseppe; De Cian, Franco; De Iaco, Pierandrea; De Simone, Michele; Deraco, Marcello; Donini, Annibale; Fiorentini, Giammaria; Frigerio, Luigi; Greggi, Stefano; Macrì, Antonio; Pasqual, Enrico Maria; Roviello, Franco; Sammartino, Paolo; Sassaroli, Cinzia; Scambia, Giovanni; Staudacher, Carlo; Vici, Patrizia; Vizza, Enrico; Valle, Mario

2017-11-23

Ovarian cancer (OC) remains relatively rare, although it is among the top 4 causes of cancer death for women younger than 50. The aggressive nature of the disease and its often late diagnosis with peritoneal involvement have an impact on prognosis. The current scientific literature presents ambiguous or uncertain indications for management of peritoneal carcinosis (PC) from OC, both owing to the lack of sufficient scientific data and their heterogeneity or lack of consistency. Therefore, the Italian Society of Surgical Oncology (SICO), the Italian Society of Obstetrics and Gynaecology, the Italian Association of Hospital Obstetricians and Gynaecologists, and the Italian Association of Medical Oncology conducted a multidisciplinary consensus conference (CC) on management of advanced OC presenting with PC during the SICO annual meeting in Naples, Italy, on September 10-11, 2015. An expert committee developed questions on diagnosis and staging work-up, indications, and procedural aspects for peritonectomy, systemic chemotherapy, and hyperthermic intraperitoneal chemotherapy for PC from OC. These questions were provided to 6 invited speakers who answered with an evidence-based report. Each report was submitted to a jury panel, representative of Italian experts in the fields of surgical oncology, gynecology, and medical oncology. The jury panel revised the reports before and after the open discussion during the CC. This article is the final document containing the clinical evidence reports and statements, revised and approved by all the authors before submission.

A memory efficient user interface for CLIPS micro-computer applications

NASA Technical Reports Server (NTRS)

Sterle, Mark E.; Mayer, Richard J.; Jordan, Janice A.; Brodale, Howard N.; Lin, Min-Jin

1990-01-01

The goal of the Integrated Southern Pine Beetle Expert System (ISPBEX) is to provide expert level knowledge concerning treatment advice that is convenient and easy to use for Forest Service personnel. ISPBEX was developed in CLIPS and delivered on an IBM PC AT class micro-computer, operating with an MS/DOS operating system. This restricted the size of the run time system to 640K. In order to provide a robust expert system, with on-line explanation, help, and alternative actions menus, as well as features that allow the user to back up or execute 'what if' scenarios, a memory efficient menuing system was developed to interface with the CLIPS programs. By robust, we mean an expert system that (1) is user friendly, (2) provides reasonable solutions for a wide variety of domain specific problems, (3) explains why some solutions were suggested but others were not, and (4) provides technical information relating to the problem solution. Several advantages were gained by using this type of user interface (UI). First, by storing the menus on the hard disk (instead of main memory) during program execution, a more robust system could be implemented. Second, since the menus were built rapidly, development time was reduced. Third, the user may try a new scenario by backing up to any of the input screens and revising segments of the original input without having to retype all the information. And fourth, asserting facts from the menus provided for a dynamic and flexible fact base. This UI technology has been applied successfully in expert systems applications in forest management, agriculture, and manufacturing. This paper discusses the architecture of the UI system, human factors considerations, and the menu syntax design.

A low-cost digital filing system for echocardiography data with MPEG4 compression and its application to remote diagnosis.

PubMed

Umeda, Akira; Iwata, Yasushi; Okada, Yasumasa; Shimada, Megumi; Baba, Akiyasu; Minatogawa, Yasuyuki; Yamada, Takayasu; Chino, Masao; Watanabe, Takafumi; Akaishi, Makoto

2004-12-01

The high cost of digital echocardiographs and the large size of data files hinder the adoption of remote diagnosis of digitized echocardiography data. We have developed a low-cost digital filing system for echocardiography data. In this system, data from a conventional analog echocardiograph are captured using a personal computer (PC) equipped with an analog-to-digital converter board. Motion picture data are promptly compressed using a moving pictures expert group (MPEG) 4 codec. The digitized data with preliminary reports obtained in a rural hospital are then sent to cardiologists at distant urban general hospitals via the internet. The cardiologists can evaluate the data using widely available movie-viewing software (Windows Media Player). The diagnostic accuracy of this double-check system was confirmed by comparison with ordinary super-VHS videotapes. We have demonstrated that digitization of echocardiography data from a conventional analog echocardiograph and MPEG 4 compression can be performed using an ordinary PC-based system, and that this system enables highly efficient digital storage and remote diagnosis at low cost.

CLIPS interface development tools and their application

NASA Technical Reports Server (NTRS)

Engel, Bernard A.; Rewerts, Chris C.; Srinivasan, Raghavan; Rogers, Joseph B.; Jones, Don D.

1990-01-01

A package of C-based PC user interface development functions has been developed and integrated into CLIPS. The primary function is ASK which provides a means to ask the user questions via multiple choice menus or the keyboard and then returns the user response to CLIPS. A parameter-like structure supplies information for the interface. Another function, SHOW, provides a means to paginate and display text. A third function, TITLE, formats and displays title screens. A similar set of C-based functions that are more general and thus will run on UNIX and machines have also been developed. Seven expert system applications were transformed from commercial development environments into CLIPS and utilize ASK, SHOW, and TITLE. Development of numerous new expert system applications using CLIPS and these interface functions has started. These functions greatly reduce the time required to build interfaces for CLIPS applications.

Personal Computer (PC) Thermal Analyzer

DTIC Science & Technology

1990-03-01

demonstrate the power of the PC Thermal Analyzer, it was compared with an existing thermal analysis method. Specifically, the PC Thermal Analyzer was...34Intelligence" I T Kowledge 1 User I Inference e Base I Interface 1i FMechanisms H 1 asI I II - I L m m m m m m - m m i m m - m m - m I- m i m Expert...Temperature in degrees centi- grade? (2) What is the total Heat Output ( power dissipation) in watts?). 25 BOARD ASSEMBLY ~UI U2 aooo 0i0000t00 U15

Determination of the ecological connectivity between landscape patches obtained using the knowledge engineer (expert) classification technique

NASA Astrophysics Data System (ADS)

Selim, Serdar; Sonmez, Namik Kemal; Onur, Isin; Coslu, Mesut

2017-10-01

Connection of similar landscape patches with ecological corridors supports habitat quality of these patches, increases urban ecological quality, and constitutes an important living and expansion area for wild life. Furthermore, habitat connectivity provided by urban green areas is supporting biodiversity in urban areas. In this study, possible ecological connections between landscape patches, which were achieved by using Expert classification technique and modeled with probabilistic connection index. Firstly, the reflection responses of plants to various bands are used as data in hypotheses. One of the important features of this method is being able to use more than one image at the same time in the formation of the hypothesis. For this reason, before starting the application of the Expert classification, the base images are prepared. In addition to the main image, the hypothesis conditions were also created for each class with the NDVI image which is commonly used in the vegetation researches. Besides, the results of the previously conducted supervised classification were taken into account. We applied this classification method by using the raster imagery with user-defined variables. Hereupon, to provide ecological connections of the tree cover which was achieved from the classification, we used Probabilistic Connection (PC) index. The probabilistic connection model which is used for landscape planning and conservation studies via detecting and prioritization critical areas for ecological connection characterizes the possibility of direct connection between habitats. As a result we obtained over % 90 total accuracy in accuracy assessment analysis. We provided ecological connections with PC index and we created inter-connected green spaces system. Thus, we offered and implicated green infrastructure system model takes place in the agenda of recent years.

Building a taxonomy of integrated palliative care initiatives: results from a focus group.

PubMed

Ewert, Benjamin; Hodiamont, Farina; van Wijngaarden, Jeroen; Payne, Sheila; Groot, Marieke; Hasselaar, Jeroen; Menten, Johann; Radbruch, Lukas

2016-03-01

Empirical evidence suggests that integrated palliative care (IPC) increases the quality of care for palliative patients and supports professional caregivers. Existing IPC initiatives in Europe vary in their design and are hardly comparable. InSuP-C, a European Union research project, aimed to build a taxonomy of IPC initiatives applicable across diseases, healthcare sectors and systems. The taxonomy of IPC initiatives was developed in cooperation with an international and multidisciplinary focus group of 18 experts. Subsequently, a consensus meeting of 10 experts revised a preliminary taxonomy and adopted the final classification system. Consisting of eight categories, with two to four items each, the taxonomy covers the process and structure of IPC initiatives. If two items in at least one category apply to an initiative, a minimum level of integration is assumed to have been reached. Categories range from the type of initiative (items: pathway, model or guideline) to patients' key contact (items: non-pc specialist, pc specialist, general practitioner). Experts recommended the inclusion of two new categories: level of care (items: primary, secondary or tertiary) indicating at which stage palliative care is integrated and primary focus of intervention describing IPC givers' different roles (items: treating function, advising/consulting or training) in the care process. Empirical studies are required to investigate how the taxonomy is used in practice and whether it covers the reality of patients in need of palliative care. The InSuP-C project will test this taxonomy empirically in selected initiatives using IPC. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

CRESST Human Performance Knowledge Mapping System

DTIC Science & Technology

2002-12-01

link subcategories. Semantica Evaluation copy unavailable Visual Mind M H No Cannot add relation labels. Smart Ideas H H No Easy to use. Linking in...Screen Users can access all top-level functions from the main screen shown in Figure 4. The design of the Web favored breadth over depth, which allows...based on whether their propositions match propositions in the expert map. LifeMap PC on the Web /Mac 0 http:/ /www2.ucsc.edu/-mlrg/mlrgtools.html This

Program Helps Generate And Manage Graphics

NASA Technical Reports Server (NTRS)

Truong, L. V.

1994-01-01

Living Color Frame Maker (LCFM) computer program generates computer-graphics frames. Graphical frames saved as text files, in readable and disclosed format, easily retrieved and manipulated by user programs for wide range of real-time visual information applications. LCFM implemented in frame-based expert system for visual aids in management of systems. Monitoring, diagnosis, and/or control, diagrams of circuits or systems brought to "life" by use of designated video colors and intensities to symbolize status of hardware components (via real-time feedback from sensors). Status of systems can be displayed. Written in C++ using Borland C++ 2.0 compiler for IBM PC-series computers and compatible computers running MS-DOS.

PC Software for Artificial Intelligence Applications.

PubMed

Epp, H; Kalin, M; Miller, D

1988-05-06

Our review has emphasized that AI tools are programming languages inspired by some problem-solving paradigm. We want to underscore their status as programming languages; even if an AI tool seems to fit a problem perfectly, its proficient use still requires the training and practice associated with any programming language. The programming manuals for PC-Plus, Smalltalk/ V, and Nexpert Object are all tutorial in nature, and the corresponding software packages come with sample applications. We find the manuals to be uniformly good introductions that try to anticipate the problems of a user who is new to the technology. All three vendors offer free technical support by telephone to licensed users. AI tools are sometimes oversold as a way to make programming easy or to avoid it altogether. The truth is that AI tools demand programming-but programming that allows you to concentrate on the essentials of the problem. If we had to implement a diagnostic system, we would look first to a product such as PC-Plus rather than BASIC or C, because PC-Plus is designed specifically for such a problem, whereas these conventional languages are not. If we had to implement a system that required graphical interfaces and could benefit from inheritance, we would look first to an object-oriented system such as Smalltalk/V that provides built-in mechanisms for both. If we had to implement an expert system that called for some mix of AI and conventional techniques, we would look first to a product such as Nexpert Object that integrates various problem-solving technologies. Finally, we might use FORTRAN if we were concerned primarily with programming a well-defined numerical algorithm. AI tools are a valuable complement to traditional languages.

Impact of a New Palliative Care Program on Health System Finances: An Analysis of the Palliative Care Program Inpatient Unit and Consultations at Johns Hopkins Medical Institutions.

PubMed

Isenberg, Sarina R; Lu, Chunhua; McQuade, John; Chan, Kelvin K W; Gill, Natasha; Cardamone, Michael; Torto, Deirdre; Langbaum, Terry; Razzak, Rab; Smith, Thomas J

2017-05-01

Palliative care inpatient units (PCUs) can improve symptoms, family perception of care, and lower per-diem costs compared with usual care. In March 2013, Johns Hopkins Medical Institutions (JHMI) added a PCU to the palliative care (PC) program. We studied the financial impact of the PC program on JHMI from March 2013 to March 2014. This study considered three components of the PC program: PCU, PC consultations, and professional fees. Using 13 months of admissions data, the team calculated the per-day variable cost pre-PCU (ie, in another hospital unit) and after transfer to the PCU. These fees were multiplied by the number of patients transferred to the PCU and by the average length of stay in the PCU. Consultation savings were estimated using established methods. Professional fees assumed a collection rate of 50%. The total positive financial impact of the PC program was $3,488,863.17. There were 153 transfers to the PCU, 60% with cancer, and an average length of stay of 5.11 days. The daily loss pretransfer to the PCU of $1,797.67 was reduced to $1,345.34 in the PCU (-25%). The PCU saved JHMI $353,645.17 in variable costs, or $452.33 per transfer. Cost savings for PC consultations in the hospital, 60% with cancer, were estimated at $2,765,218. $370,000 was collected in professional fees savings. The PCU and PC program had a favorable impact on JHMI while providing expert patient-centered care. As JHMI moves to an accountable care organization model, value-based patient-centered care and increased intensive care unit availability are desirable.

MUC4 mucin- a therapeutic target for pancreatic ductal adenocarcinoma.

PubMed

Gautam, Shailendra K; Kumar, Sushil; Cannon, Andrew; Hall, Bradley; Bhatia, Rakesh; Nasser, Mohd Wasim; Mahapatra, Sidharth; Batra, Surinder K; Jain, Maneesh

2017-07-01

Pancreatic cancer (PC) is characterized by mucin overexpression. MUC4 is the most differentially overexpressed membrane-bound mucin that plays a functional role in disease progression and therapy resistance. Area covered: We describe the clinicopathological significance of MUC4, summarize mechanisms contributing to its deregulated expression, review preclinical studies aimed at inhibiting MUC4, and discuss how MUC4 overexpression provides opportunities for developing targeted therapies. Finally, we discuss the challenges for developing MUC4-based therapeutics, and identify areas where efforts should be directed to effectively exploit MUC4 as a therapeutic target for PC. Expert opinion: Studies demonstrating that abrogation of MUC4 expression reduces proliferation and metastasis of PC cells and enhances sensitivity to therapeutic agents affirm its utility as a therapeutic target. Emerging evidence also supports the suitability of MUC4 as a potential immunotherapy target. However, these studies have been limited to in vitro, ex vivo or in vivo approaches using xenograft tumors in immunodeficient murine models. For translational relevance, MUC4-targeted therapies should be evaluated in murine models with intact immune system and accurate tumor microenvironment. Additionally, future studies evaluating MUC4 as a target for immunotherapy must entail characterization of immune response in PC patients and investigate its association with immunosuppression and survival.

Scalable Options for Extended Skill Building Following Didactic Training in Cognitive-Behavioral Therapy for Anxious Youth: A Pilot Randomized Trial.

PubMed

Chu, Brian C; Carpenter, Aubrey L; Wyszynski, Christopher M; Conklin, Phoebe H; Comer, Jonathan S

2017-01-01

A sizable gap exists between the availability of evidence-based psychological treatments and the number of community therapists capable of delivering such treatments. Limited time, resources, and access to experts prompt the need for easily disseminable, lower cost options for therapist training and continued support beyond initial training. A pilot randomized trial tested scalable extended support models for therapists following initial training. Thirty-five postdegree professionals (43%) or graduate trainees (57%) from diverse disciplines viewed an initial web-based training in cognitive-behavioral therapy (CBT) for youth anxiety and then were randomly assigned to 10 weeks of expert streaming (ES; viewing weekly online supervision sessions of an expert providing consultation), peer consultation (PC; non-expert-led group discussions of CBT), or fact sheet self-study (FS; weekly review of instructional fact sheets). In initial expectations, trainees rated PC as more appropriate and useful to meet its goals than either ES or FS. At post, all support programs were rated as equally satisfactory and useful for therapists' work, and comparable in increasing self-reported use of CBT strategies (b = .19, p = .02). In contrast, negative linear trends were found on a knowledge quiz (b = -1.23, p = .01) and self-reported beliefs about knowledge (b = -1.50, p < .001) and skill (b = -1.15, p < .001). Attrition and poor attendance presented a moderate concern for PC, and ES was rated as having the lowest implementation potential. Preliminary findings encourage further development of low-cost, scalable options for continued support of evidence-based training.

The challenge of mapping between two medical coding systems.

PubMed

Wojcik, Barbara E; Stein, Catherine R; Devore, Raymond B; Hassell, L Harrison

2006-11-01

Deployable medical systems patient conditions (PCs) designate groups of patients with similar medical conditions and, therefore, similar treatment requirements. PCs are used by the U.S. military to estimate field medical resources needed in combat operations. Information associated with each of the 389 PCs is based on subject matter expert opinion, instead of direct derivation from standard medical codes. Currently, no mechanisms exist to tie current or historical medical data to PCs. Our study objective was to determine whether reliable conversion between PC codes and International Classification of Diseases, 9th Revision, Clinical Modification (ICD-9-CM) diagnosis codes is possible. Data were analyzed for three professional coders assigning all applicable ICD-9-CM diagnosis codes to each PC code. Inter-rater reliability was measured by using Cohen's K statistic and percent agreement. Methods were developed to calculate kappa statistics when multiple responses could be selected from many possible categories. Overall, we found moderate support for the possibility of reliable conversion between PCs and ICD-9-CM diagnoses (mean kappa = 0.61). Current PCs should be modified into a system that is verifiable with real data.

Using CLIPS in a distributed system: The Network Control Center (NCC) expert system

NASA Technical Reports Server (NTRS)

Wannemacher, Tom

1990-01-01

This paper describes an intelligent troubleshooting system for the Help Desk domain. It was developed on an IBM-compatible 80286 PC using Microsoft C and CLIPS and an AT&T 3B2 minicomputer using the UNIFY database and a combination of shell script, C programs and SQL queries. The two computers are linked by a lan. The functions of this system are to help non-technical NCC personnel handle trouble calls, to keep a log of problem calls with complete, concise information, and to keep a historical database of problems. The database helps identify hardware and software problem areas and provides a source of new rules for the troubleshooting knowledge base.

Reference set for performance testing of pediatric vaccine safety signal detection methods and systems.

PubMed

Brauchli Pernus, Yolanda; Nan, Cassandra; Verstraeten, Thomas; Pedenko, Mariia; Osokogu, Osemeke U; Weibel, Daniel; Sturkenboom, Miriam; Bonhoeffer, Jan

2016-12-12

Safety signal detection in spontaneous reporting system databases and electronic healthcare records is key to detection of previously unknown adverse events following immunization. Various statistical methods for signal detection in these different datasources have been developed, however none are geared to the pediatric population and none specifically to vaccines. A reference set comprising pediatric vaccine-adverse event pairs is required for reliable performance testing of statistical methods within and across data sources. The study was conducted within the context of the Global Research in Paediatrics (GRiP) project, as part of the seventh framework programme (FP7) of the European Commission. Criteria for the selection of vaccines considered in the reference set were routine and global use in the pediatric population. Adverse events were primarily selected based on importance. Outcome based systematic literature searches were performed for all identified vaccine-adverse event pairs and complemented by expert committee reports, evidence based decision support systems (e.g. Micromedex), and summaries of product characteristics. Classification into positive (PC) and negative control (NC) pairs was performed by two independent reviewers according to a pre-defined algorithm and discussed for consensus in case of disagreement. We selected 13 vaccines and 14 adverse events to be included in the reference set. From a total of 182 vaccine-adverse event pairs, we classified 18 as PC, 113 as NC and 51 as unclassifiable. Most classifications (91) were based on literature review, 45 were based on expert committee reports, and for 46 vaccine-adverse event pairs, an underlying pathomechanism was not plausible classifying the association as NC. A reference set of vaccine-adverse event pairs was developed. We propose its use for comparing signal detection methods and systems in the pediatric population. Published by Elsevier Ltd.

RADC SCAT automated sneak circuit analysis tool

NASA Astrophysics Data System (ADS)

Depalma, Edward L.

The sneak circuit analysis tool (SCAT) provides a PC-based system for real-time identification (during the design phase) of sneak paths and design concerns. The tool utilizes an expert system shell to assist the analyst so that prior experience with sneak analysis is not necessary for performance. Both sneak circuits and design concerns are targeted by this tool, with both digital and analog circuits being examined. SCAT focuses the analysis at the assembly level, rather than the entire system, so that most sneak problems can be identified and corrected by the responsible design engineer in a timely manner. The SCAT program identifies the sneak circuits to the designer, who then decides what course of action is necessary.

Why not make a PC cluster of your own? 5. AppleSeed: A Parallel Macintosh Cluster for Scientific Computing

NASA Astrophysics Data System (ADS)

Decyk, Viktor K.; Dauger, Dean E.

We have constructed a parallel cluster consisting of Apple Macintosh G4 computers running both Classic Mac OS as well as the Unix-based Mac OS X, and have achieved very good performance on numerically intensive, parallel plasma particle-in-cell simulations. Unlike other Unix-based clusters, no special expertise in operating systems is required to build and run the cluster. This enables us to move parallel computing from the realm of experts to the mainstream of computing.

Acceptability and Reliability of a Novel Palliative Care Screening Tool Among Emergency Department Providers.

PubMed

Bowman, Jason; George, Naomi; Barrett, Nina; Anderson, Kelsey; Dove-Maguire, Kalie; Baird, Janette

2016-06-01

The Palliative Care and Rapid Emergency Screening (P-CaRES) Project is an initiative intended to improve access to palliative care (PC) among emergency department (ED) patients with life-limiting illness by facilitating early referral for inpatient PC consultations. In the previous two phases of this project, we derived and validated a novel PC screening tool. This paper reports on the third and final preimplementation phase. Examine the acceptability of the P-CaRES tool among PC and ED providers as well as test its reliability on case vignettes. Compare variations in reliability and acceptability of the tool based on ED providers' roles (attendings, residents, and nurses) and lengths of experience. A two-part electronic survey was distributed to ED providers at multiple sites across the United States. We tested the reliability of the tool in the first part of the survey, through a series of case vignettes. A criterion standard of correct responses was first defined by consensus input from expert PC physicians' interpretations of the vignettes. The experts' input was validated using the Gwet's AC1 coefficient for inter-rater reliability. ED providers were then presented with the case vignettes and asked to use the P-CaRES tool to correctly identify which patients had unmet PC needs. ED provider responses were compared both against the criterion standard and against different subsets of respondents (divided both by role and by level of experience). The second part of the survey assessed acceptability of the P-CaRES tool among ED providers using responses to questions from a modified Ottawa Acceptability of Decision Rules Instrument, based on a 1-5 Likert rating scale. Descriptive statistics were used to report all outcomes. In total, 213 ED providers employed in three different regions across the country responded to the survey (39.4%) and 185 (86.9%) of those completed it. The majority of providers felt that the tool would be useful in their practice (80.5%), agreed that the tool was clear and unambiguous (87.1%), thought that use of the tool would likely benefit patients (87.5%), and thought that it would result in improved use of resources to help severely ill patients (83.6%). Over three-quarters of ED providers (78.5%) also self-reported that they refer patients with unmet PC needs less than 10% of the time, and only 10.8% of respondents believed that they are already utilizing an effective strategy to screen or refer patients to PC. Applying our P-CaRES tool to case vignettes, ED providers generated PC referrals in concordance with PC experts over 88.7% of the time (95% confidence interval = 86.4% to 90.6%), with an overall sensitivity of more than 90%. These results varied minimally regardless of the respondent's role in the ED or their level of experience. Screening by emergency medicine providers for unmet PC needs using a brief, novel, content-validated screening tool is acceptable and is also reliable when applied to case vignettes-regardless of provider role or experience. Clinical trial and further study are warranted and are currently under way. © 2016 by the Society for Academic Emergency Medicine.

Palliative Care in Latin America from the Professional Perspective: A SWOT Analysis.

PubMed

Pastrana, Tania; Centeno, Carlos; De Lima, Liliana

2015-05-01

The development of palliative care (PC) in Latin America (LA) has been slow compared to other regions. A Strengths, Weaknesses, Opportunities, and Threats (SWOT) analysis may contribute to the identification of barriers and successful strategies. The study's objective was to conduct a SWOT analysis of the development of PC in LA from the PC professional perspective. Experts from 19 countries of the region were selected in collaboration with national associations. Specific questions were included in the Latin American Association for Palliative Care (ALCP) Atlas of Palliative Care cross-survey 2012. Content analysis was conducted categorizing responses in a SWOT framework. Descriptive and correlation analyses were performed. A total of 577 statements were provided. Among the Strengths were integration into health systems and increasing number of professionals with PC training. Among weaknesses were lack of national PC programs, limited connection between policymakers and professionals, and barriers in the availability of opioids. Opportunities were increased awareness of policymakers and higher interest of students and professionals. Threats were competing funding for other services and medications, limited interest of the pharmaceutical industry in producing affordable opioid medications, and emphasis by the media on opioid diversion and abuse. Comments were categorized under (1) health policy, (2) education and research, (3) service provision, (4) opioid availability, and (5) advocacy. A moderately positive correlation was found (R=0.4 in both) between the ALCP development index and the number of positive/negative factors mentioned by country. A SWOT framework is applicable in a situational analysis and helps to identify common aspects among the countries and key elements in the development of PC in Latin America.

EXADS - EXPERT SYSTEM FOR AUTOMATED DESIGN SYNTHESIS

NASA Technical Reports Server (NTRS)

Rogers, J. L.

1994-01-01

The expert system called EXADS was developed to aid users of the Automated Design Synthesis (ADS) general purpose optimization program. Because of the general purpose nature of ADS, it is difficult for a nonexpert to select the best choice of strategy, optimizer, and one-dimensional search options from the one hundred or so combinations that are available. EXADS aids engineers in determining the best combination based on their knowledge of the problem and the expert knowledge previously stored by experts who developed ADS. EXADS is a customized application of the AESOP artificial intelligence program (the general version of AESOP is available separately from COSMIC. The ADS program is also available from COSMIC.) The expert system consists of two main components. The knowledge base contains about 200 rules and is divided into three categories: constrained, unconstrained, and constrained treated as unconstrained. The EXADS inference engine is rule-based and makes decisions about a particular situation using hypotheses (potential solutions), rules, and answers to questions drawn from the rule base. EXADS is backward-chaining, that is, it works from hypothesis to facts. The rule base was compiled from sources such as literature searches, ADS documentation, and engineer surveys. EXADS will accept answers such as yes, no, maybe, likely, and don't know, or a certainty factor ranging from 0 to 10. When any hypothesis reaches a confidence level of 90% or more, it is deemed as the best choice and displayed to the user. If no hypothesis is confirmed, the user can examine explanations of why the hypotheses failed to reach the 90% level. The IBM PC version of EXADS is written in IQ-LISP for execution under DOS 2.0 or higher with a central memory requirement of approximately 512K of 8 bit bytes. This program was developed in 1986.

EMQN best practice guidelines for the molecular genetic diagnosis of hereditary hemochromatosis (HH).

PubMed

Porto, Graça; Brissot, Pierre; Swinkels, Dorine W; Zoller, Heinz; Kamarainen, Outi; Patton, Simon; Alonso, Isabel; Morris, Michael; Keeney, Steve

2016-04-01

Molecular genetic testing for hereditary hemochromatosis (HH) is recognized as a reference test to confirm the diagnosis of suspected HH or to predict its risk. The vast majority (typically >90%) of patients with clinically characterized HH are homozygous for the p.C282Y variant in the HFE gene, referred to as HFE-related HH. Since 1996, HFE genotyping was implemented in diagnostic algorithms for suspected HH, allowing its early diagnosis and prevention. However, the penetrance of disease in p.C282Y homozygotes is incomplete. Hence, homozygosity for p.C282Y is not sufficient to diagnose HH. Neither is p.C282Y homozygosity required for diagnosis as other rare forms of HH exist, generally referred to as non-HFE-related HH. These pose significant challenges when defining criteria for referral, testing protocols, interpretation of test results and reporting practices. We present best practice guidelines for the molecular genetic diagnosis of HH where recommendations are classified, as far as possible, according to the level and strength of evidence. For clarification, the guidelines' recommendations are preceded by a detailed description of the methodology and results obtained with a series of actions taken in order to achieve a wide expert consensus, namely: (i) a survey on the current practices followed by laboratories offering molecular diagnosis of HH; (ii) a systematic literature search focused on some identified controversial topics; (iii) an expert Best Practice Workshop convened to achieve consensus on the practical recommendations included in the guidelines.

EMQN best practice guidelines for the molecular genetic diagnosis of hereditary hemochromatosis (HH)

PubMed Central

Porto, Graça; Brissot, Pierre; Swinkels, Dorine W; Zoller, Heinz; Kamarainen, Outi; Patton, Simon; Alonso, Isabel; Morris, Michael; Keeney, Steve

2016-01-01

Molecular genetic testing for hereditary hemochromatosis (HH) is recognized as a reference test to confirm the diagnosis of suspected HH or to predict its risk. The vast majority (typically >90%) of patients with clinically characterized HH are homozygous for the p.C282Y variant in the HFE gene, referred to as HFE-related HH. Since 1996, HFE genotyping was implemented in diagnostic algorithms for suspected HH, allowing its early diagnosis and prevention. However, the penetrance of disease in p.C282Y homozygotes is incomplete. Hence, homozygosity for p.C282Y is not sufficient to diagnose HH. Neither is p.C282Y homozygosity required for diagnosis as other rare forms of HH exist, generally referred to as non-HFE-related HH. These pose significant challenges when defining criteria for referral, testing protocols, interpretation of test results and reporting practices. We present best practice guidelines for the molecular genetic diagnosis of HH where recommendations are classified, as far as possible, according to the level and strength of evidence. For clarification, the guidelines' recommendations are preceded by a detailed description of the methodology and results obtained with a series of actions taken in order to achieve a wide expert consensus, namely: (i) a survey on the current practices followed by laboratories offering molecular diagnosis of HH; (ii) a systematic literature search focused on some identified controversial topics; (iii) an expert Best Practice Workshop convened to achieve consensus on the practical recommendations included in the guidelines. PMID:26153218

CLIPSITS - CLIPS INTELLIGENT TUTORING SYSTEM

NASA Technical Reports Server (NTRS)

Riley, G.

1994-01-01

The CLIPS Intelligent Tutoring System (CLIPSITS) is designed to be used to learn CLIPS, the C-language Integrated Production System expert system shell developed by the Software Technology Branch at Johnson Space Center. The goal of CLIPSITS is to provide the student with a tool to practice the syntax and concepts covered in the CLIPS User's Guide. It attempts to provide expert diagnosis and advice during problem solving which is typically not available without an instructor. CLIPSITS is divided into 10 lessons which mirror the first 10 chapters of the CLIPS User's Guide. This version of CLIPSITS is compatible with the Version 4.2 and 4.3 CLIPS User's Guide. However, the program does not cover any new features of CLIPS v4.3 that were added since the release of v4.2. The chapter numbers in the CLIPS User's Guide correspond directly with the lesson numbers in CLIPSITS. Each lesson in the program contains anywhere from 1 to 10 problems. Most of these have multiple parts. The student is given a subset of these problems from each lesson to work. The actual number of problems presented depends on how well the student masters the previous problem(s). The progression through these lessons is maintained in a personalized file under the student's name. As with most computer languages, there is usually more than one way to solve a problem. CLIPSITS attempts to be as flexible as possible and to allow as many correct solutions as possible. CLIPSITS gives the student the option of setting his/her own colors for the screen interface and the option of redefining special keystroke combinations used within the program. CLIPSITS requires an IBM PC compatible with 640K RAM and optional 2 or 3 button mouse. A 286- or 386-based machine is preferable. Performance will be somewhat slower on an XT class machine. The program must be installed on a hard disk with 825 KB space available. The program was developed in 1989. The standard distribution media is three 5.25" IBM PC DOS format diskettes. The program is also sold bundled with CLIPS for a special combined price as COS-10025. NOTE: Only the executable code is distributed. Supporting documentation is included on the diskettes. IBM, IBM PC and XT are registered trademarks of International Business Machines Corporation.

CLIPS application user interface for the PC

NASA Technical Reports Server (NTRS)

Jenkins, Jim; Holbrook, Rebecca; Shewhart, Mark; Crouse, Joey; Yarost, Stuart

1991-01-01

The majority of applications that utilize expert system development programs for their knowledge representation and inferencing capability require some form of interface with the end user. This interface is more than likely an interaction through the computer screen. When building an application the user interface can prove to be the most difficult and time consuming aspect to program. Commercial products currently exist which address this issue. To keep pace C Language Integrated Production System (CLIPS) will need to find a solution for their lack of an easy to use Application User Interface (AUI). This paper represents a survey of the DoD CLIPS' user community and provides the backbone of a possible solution.

Integrating Commercial Off-The-Shelf (COTS) graphics and extended memory packages with CLIPS

NASA Technical Reports Server (NTRS)

Callegari, Andres C.

1990-01-01

This paper addresses the question of how to mix CLIPS with graphics and how to overcome PC's memory limitations by using the extended memory available in the computer. By adding graphics and extended memory capabilities, CLIPS can be converted into a complete and powerful system development tool, on the other most economical and popular computer platform. New models of PCs have amazing processing capabilities and graphic resolutions that cannot be ignored and should be used to the fullest of their resources. CLIPS is a powerful expert system development tool, but it cannot be complete without the support of a graphics package needed to create user interfaces and general purpose graphics, or without enough memory to handle large knowledge bases. Now, a well known limitation on the PC's is the usage of real memory which limits CLIPS to use only 640 Kb of real memory, but now that problem can be solved by developing a version of CLIPS that uses extended memory. The user has access of up to 16 MB of memory on 80286 based computers and, practically, all the available memory (4 GB) on computers that use the 80386 processor. So if we give CLIPS a self-configuring graphics package that will automatically detect the graphics hardware and pointing device present in the computer, and we add the availability of the extended memory that exists in the computer (with no special hardware needed), the user will be able to create more powerful systems at a fraction of the cost and on the most popular, portable, and economic platform available such as the PC platform.

Evaluation of a Pilot Implementation to Integrate Alcohol-Related Care within Primary Care

PubMed Central

Bobb, Jennifer F.; Lee, Amy K.; Lapham, Gwen T.; Oliver, Malia; Ludman, Evette; Achtmeyer, Carol; Parrish, Rebecca; Caldeiro, Ryan M.; Lozano, Paula; Richards, Julie E.; Bradley, Katharine A.

2017-01-01

Alcohol use is a major cause of disability and death worldwide. To improve prevention and treatment addressing unhealthy alcohol use, experts recommend that alcohol-related care be integrated into primary care (PC). However, few healthcare systems do so. To address this gap, implementation researchers and clinical leaders at Kaiser Permanente Washington partnered to design a high-quality Program of Sustained Patient-centered Alcohol-related Care (SPARC). Here, we describe the SPARC pilot implementation, evaluate its effectiveness within three large pilot sites, and describe the qualitative findings on barriers and facilitators. Across the three sites (N = 74,225 PC patients), alcohol screening increased from 8.9% of patients pre-implementation to 62% post-implementation (p < 0.0001), with a corresponding increase in assessment for alcohol use disorders (AUD) from 1.2 to 75 patients per 10,000 seen (p < 0.0001). Increases were sustained over a year later, with screening at 84.5% and an assessment rate of 81 patients per 10,000 seen across all sites. In addition, there was a 50% increase in the number of new AUD diagnoses (p = 0.0002), and a non-statistically significant 54% increase in treatment within 14 days of new diagnoses (p = 0.083). The pilot informed an ongoing stepped-wedge trial in the remaining 22 PC sites. PMID:28885557

TARGET - TASK ANALYSIS REPORT GENERATION TOOL, VERSION 1.0

NASA Technical Reports Server (NTRS)

Ortiz, C. J.

1994-01-01

The Task Analysis Report Generation Tool, TARGET, is a graphical interface tool used to capture procedural knowledge and translate that knowledge into a hierarchical report. TARGET is based on VISTA, a knowledge acquisition tool developed by the Naval Systems Training Center. TARGET assists a programmer and/or task expert organize and understand the steps involved in accomplishing a task. The user can label individual steps in the task through a dialogue-box and get immediate graphical feedback for analysis. TARGET users can decompose tasks into basic action kernels or minimal steps to provide a clear picture of all basic actions needed to accomplish a job. This method allows the user to go back and critically examine the overall flow and makeup of the process. The user can switch between graphics (box flow diagrams) and text (task hierarchy) versions to more easily study the process being documented. As the practice of decomposition continues, tasks and their subtasks can be continually modified to more accurately reflect the user's procedures and rationale. This program is designed to help a programmer document an expert's task thus allowing the programmer to build an expert system which can help others perform the task. Flexibility is a key element of the system design and of the knowledge acquisition session. If the expert is not able to find time to work on the knowledge acquisition process with the program developer, the developer and subject matter expert may work in iterative sessions. TARGET is easy to use and is tailored to accommodate users ranging from the novice to the experienced expert systems builder. TARGET is written in C-language for IBM PC series and compatible computers running MS-DOS and Microsoft Windows version 3.0 or 3.1. No source code is supplied. The executable also requires 2Mb of RAM, a Microsoft compatible mouse, a VGA display and an 80286, 386 or 486 processor machine. The standard distribution medium for TARGET is one 5.25 inch 360K MS-DOS format diskette. TARGET was developed in 1991.

Palliative care consultation in the process of organ donation after cardiac death.

PubMed

Kelso, Catherine McVearry; Lyckholm, Laurie J; Coyne, Patrick J; Smith, Thomas J

2007-02-01

Palliative care consultation has been demonstrated to be useful in many situations in which expert symptom management, communication around sensitive issues, and family support may serve to enhance or improve care. The process of organ donation is an example of this concept, specifically the process of donation after cardiac death (DCD). DCD allows patients with severe, irreversible brain injuries that do not meet standard criteria for brain death to donate organs when death is declared by cardiopulmonary criteria. The DCD method of donation has been deemed an ethically appropriate means of organ donation and is supported by the organ procurement and medical communities, as well as the public. The palliative care (PC) team can make a significant contribution to the care of the patient and family in the organ donation process. In this paper we describe the controlled DCD process at one institution that utilizes the PC team to provide expert end-of-life care, including comprehensive medical management and family support. PC skills and principles applicable to the DCD process include communication, coordination of care, and skillful ventilator withdrawal. If death occurs within 90 minutes of withdrawal of life support, organs may be successfully recovered for transplantation. If the patient survives longer than 90 minutes, his or her care continues to be provided by the PC team. Palliative care can contribute to standardizing quality end-of-life care practices in the DCD process and provide education for involved personnel. Further experience, research and national discussions will be helpful in refining these practices, to make this difficult and challenging experience as gentle and supportive as possible for the courageous families who participate in this process.

Diagnosis and management of Pneumocystis jirovecii infection.

PubMed

White, P Lewis; Backx, Matthijs; Barnes, Rosemary A

2017-05-01

Pneumocystis jirovecii is a ubiquitous fungus, which causes pneumonia in humans. Diagnosis was hampered by the inability to culture the organism, and based on microscopic examination of respiratory samples or clinical presentation. New assays can assist in the diagnosis and even aid with the emergence of resistant infections. Areas covered: This manuscript will provide background information on Pneumocystis pneumonia (PcP). Diagnosis, from radiological to non-microbiological (e.g. Lactate dehydrogenase) and microbiological investigations (Microscopy, PCR, β-D-Glucan) will be discussed. Recommendations on prophylactic and therapeutic management will be covered. Expert commentary: PcP diagnosis using microscopy is far from optimal and false negatives will occur. With an incidence of 1% or less, the pre-test probability of not having PcP is 99% and testing is suited to excluding disease. Microscopy provides a high degree of diagnostic confidence but it is not infallible, and its lower sensitivity limits its application. Newer diagnostics (PCR, β-D-Glucan) can aid management and improve performance when testing less invasive specimens, such as upper respiratory samples or blood, alleviating clinical pressure. Combination testing may allow PcP to be both diagnosed and excluded, and molecular testing can assist in the detection of emerging resistant PcP.

Development of a PC-based diabetes simulator in collaboration with teenagers with type 1 diabetes.

PubMed

Nordfeldt, S; Hanberger, L; Malm, F; Ludvigsson, J

2007-02-01

The main aim of this study was to develop and test in a pilot study a PC-based interactive diabetes simulator prototype as a part of future Internet-based support systems for young teenagers and their families. A second aim was to gain experience in user-centered design (UCD) methods applied to such subjects. Using UCD methods, a computer scientist participated in iterative user group sessions involving teenagers with Type 1 diabetes 13-17 years old and parents. Input was transformed into a requirements specification by the computer scientist and advisors. This was followed by gradual prototype development based on a previously developed mathematical core. Individual test sessions were followed by a pilot study with five subjects testing a prototype. The process was evaluated by registration of flow and content of input and opinions from expert advisors. It was initially difficult to motivate teenagers to participate. User group discussion topics ranged from concrete to more academic matters. The issue of a simulator created active discussions among parents and teenagers. A large amount of input was generated from discussions among the teenagers. Individual test runs generated useful input. A pilot study suggested that the gradually elaborated software was functional. A PC-based diabetes simulator may create substantial interest among teenagers and parents, and the prototype seems worthy of further development and studies. UCD methods may generate significant input for computer support system design work and contribute to a functional design. Teenager involvement in design work may require time, patience, and flexibility.

Effectiveness of Emergency Department Based Palliative Care for Adults with Advanced Disease: A Systematic Review

PubMed Central

Nunes, Cristina Moura; Gomes, Barbara

2016-01-01

Abstract Background: Emergency departments (EDs) are seeing more patients with palliative care (PC) needs, but evidence on best practice is scarce. Objectives: To examine the effectiveness of ED-based PC interventions on hospital admissions (primary outcome), length of stay (LOS), symptoms, quality of life, use of other health care services, and PC referrals for adults with advanced disease. Methods: We searched five databases until August 2014, checked reference lists/conference abstracts, and contacted experts. Eligible studies were controlled trials, pre-post studies, cohort studies, and case series reporting outcomes of ED-based PC. Results: Five studies with 4374 participants were included: three case series and two cohort studies. Interventions included a screening tool, traditional ED-PC, and integrated ED-PC. Two studies reported on hospital admissions: in one study there was no statistically significant difference in 90-day readmission rates between patients who initiated integrated PC at the ED (11/50 patients, 22%) compared to those who initiated PC after hospital admission (179/1385, 13%); another study showed a high admission rate (90%) in 14 months following ED-PC, but without comparison. One study showed an LOS reduction (mean 4.32 days in ED-initiated PC group versus 8.29 days in postadmission-initiated group; p < 0.01). There was scarce evidence on other outcomes except for conflicting findings on survival: in one study, ED-PC patients were more likely to experience an interval between ED presentation and death >9 hours (OR 2.75, 95% CI 2.21–3.41); another study showed increased mortality risk in the intervention group; and a case series described a higher in-hospital death rate when PC was ED-initiated (62%), compared to ward (16%) or ICU (50%) (unknown p-value). Conclusions: There is yet no evidence that ED-based PC affects patient outcomes except for indication from one study of no association with 90-day hospital readmission but a possible reduction in LOS if integrated PC is introduced early at ED rather than after hospital admission. There is an urgent need for trials to confirm these findings alongside other potential benefits and survival effects. PMID:27115914

LCFM - LIVING COLOR FRAME MAKER: PC GRAPHICS GENERATION AND MANAGEMENT TOOL FOR REAL-TIME APPLICATIONS

NASA Technical Reports Server (NTRS)

Truong, L. V.

1994-01-01

Computer graphics are often applied for better understanding and interpretation of data under observation. These graphics become more complicated when animation is required during "run-time", as found in many typical modern artificial intelligence and expert systems. Living Color Frame Maker is a solution to many of these real-time graphics problems. Living Color Frame Maker (LCFM) is a graphics generation and management tool for IBM or IBM compatible personal computers. To eliminate graphics programming, the graphic designer can use LCFM to generate computer graphics frames. The graphical frames are then saved as text files, in a readable and disclosed format, which can be easily accessed and manipulated by user programs for a wide range of "real-time" visual information applications. For example, LCFM can be implemented in a frame-based expert system for visual aids in management of systems. For monitoring, diagnosis, and/or controlling purposes, circuit or systems diagrams can be brought to "life" by using designated video colors and intensities to symbolize the status of hardware components (via real-time feedback from sensors). Thus status of the system itself can be displayed. The Living Color Frame Maker is user friendly with graphical interfaces, and provides on-line help instructions. All options are executed using mouse commands and are displayed on a single menu for fast and easy operation. LCFM is written in C++ using the Borland C++ 2.0 compiler for IBM PC series computers and compatible computers running MS-DOS. The program requires a mouse and an EGA/VGA display. A minimum of 77K of RAM is also required for execution. The documentation is provided in electronic form on the distribution medium in WordPerfect format. A sample MS-DOS executable is provided on the distribution medium. The standard distribution medium for this program is one 5.25 inch 360K MS-DOS format diskette. The contents of the diskette are compressed using the PKWARE archiving tools. The utility to unarchive the files, PKUNZIP.EXE, is included. The Living Color Frame Maker tool was developed in 1992.

The current status of immunotherapy in peritoneal carcinomatosis.

PubMed

Ströhlein, Michael Alfred; Heiss, Markus Maria; Jauch, Karl-Walter

2016-10-01

Peritoneal carcinomatosis (PC) is a cancer disease with an urgent need for effective treatment. Conventional chemotherapy failed to show acceptable results. Cytoreductive surgery and hyperthermic chemoperfusion (HIPEC) are only beneficial in few patients with resectable peritoneal metastasis. Immunotherapy could be attractive against PC, as all requirements for immunotherapy are available in the peritoneal cavity. This review analyzes the present literature for immunotherapy of PC. Advances from immune stimulators, radionucleotide-conjugated- and bispecific antibodies to future developments like adoptive engineered T-cells with chimeric receptors are discussed. The clinical development of catumaxomab, which was the first intraperitoneal immunotherapy to be approved for clinical treatment, is discussed. The requirements for future developments are illustrated. Expert commentary: Immunotherapy of peritoneal carcinomatosis is manageable, showing striking cancer cell killing. Improved profiles of adverse events by therapy-induced cytokine release, enhanced specific killing and optimal treatment schedules within multimodal treatment will be key factors.

[The use of computer technology and digital photography in the work of a forensic medical expertise bureau].

PubMed

Novoselov, V P; Fedorov, S A

1999-01-01

UNISCAN scanner with PC was used at department of medical criminology and at the histological department of the Novosibirsk Regional Bureau of Forensic Medical Expert Evaluations. The quality of images obtained by computers and digital photography is not inferior to that of traditional photographs.

IBM PC/IX operating system evaluation plan

NASA Technical Reports Server (NTRS)

Dominick, Wayne D. (Editor); Granier, Martin; Hall, Philip P.; Triantafyllopoulos, Spiros

1984-01-01

An evaluation plan for the IBM PC/IX Operating System designed for IBM PC/XT computers is discussed. The evaluation plan covers the areas of performance measurement and evaluation, software facilities available, man-machine interface considerations, networking, and the suitability of PC/IX as a development environment within the University of Southwestern Louisiana NASA PC Research and Development project. In order to compare and evaluate the PC/IX system, comparisons with other available UNIX-based systems are also included.

Application of eye movement measuring system OBER 2 to medicine and technology

NASA Astrophysics Data System (ADS)

Ober, Jozef; Hajda, Janusz; Loska, Jacek; Jamicki, Michal

1997-08-01

The OBER 2 is an infrared light eye movement measuring system and it works with IBM PC compatible computers. As one of the safest systems for measuring of eye movement it uses a very short period of infrared light flashing time (80 microsecond for each measure point). System has an advanced analog-digital controller, which includes background suppression and prediction mechanisms guaranteeing elimination of slow changes and fluctuations of external illumination frequency up to 100 Hz, with effectiveness better than 40 dB. Setting from PC the active measure axis, sampling rate (25 - 4000 Hz) and making start and stop the measure, make it possible to control the outside environment in real-time. By proper controlling of gain it is possible to get high time and position resolution of 0.5 minute of arc even for big amplitude of eye movement (plus or minus 20 degree of visual angle). The whole communication system can also be driven directly by eye movement in real time. The possibility of automatic selection of the most essential elements of eye movement, individual for each person and those that take place for each person in determined situations of life independently from personal features, is a key to practical application. Hence one of conducted research topic is a personal identification based on personal features. Another task is a research project of falling asleep detection, which can be applied to warn the drivers before falling asleep while driving. This measuring system with a proper expert system can also be used to detect a dyslexia and other disabilities of the optic system.

REDEX - The ranging equipment diagnostic expert system

NASA Technical Reports Server (NTRS)

Luczak, Edward C.; Gopalakrishnan, K.; Zillig, David J.

1989-01-01

REDEX, an advanced prototype expert system that diagnoses hardware failures in the Ranging Equipment (RE) at NASA's Ground Network tracking stations is described. REDEX will help the RE technician identify faulty circuit cards or modules that must be replaced, and thereby reduce troubleshooting time. It features a highly graphical user interface that uses color block diagrams and layout diagrams to illustrate the location of a fault. A semantic network knowledge representation technique was used to model the design structure of the RE. A catalog of generic troubleshooting rules was compiled to represent heuristics that are applied in diagnosing electronic equipment. Specific troubleshooting rules were identified to represent additional diagnostic knowledge that is unique to the RE. Over 50 generic and 250 specific troubleshooting rules have been derived. REDEX is implemented in Prolog on an IBM PC AT-compatible workstation. Block diagram graphics displays are color-coded to identify signals that have been monitored or inferred to have nominal values, signals that are out of tolerance, and circuit cards and functions that are diagnosed as faulty. A hypertext-like scheme is used to allow the user to easily navigate through the space of diagrams and tables. Over 50 graphic and tabular displays have been implemented. REDEX is currently being evaluated in a stand-alone mode using simulated RE fault scenarios. It will soon be interfaced to the RE and tested in an online environment. When completed and fielded, REDEX will be a concrete example of the application of expert systems technology to the problem of improving performance and reducing the lifecycle costs of operating NASA's communications networks in the 1990s.

REDEX: The ranging equipment diagnostic expert system

NASA Technical Reports Server (NTRS)

Luczak, Edward C.; Gopalakrishnan, K.; Zillig, David J.

1989-01-01

REDEX, an advanced prototype expert system that diagnoses hardware failures in the Ranging Equipment (RE) at NASA's Ground Network tracking stations is described. REDEX will help the RE technician identify faulty circuit cards or modules that must be replaced, and thereby reduce troubleshooting time. It features a highly graphical user interface that uses color block diagrams and layout diagrams to illustrate the location of a fault. A semantic network knowledge representation technique was used to model the design structure of the RE. A catalog of generic troubleshooting rules was compiled to represent heuristics that are applied in diagnosing electronic equipment. Specific troubleshooting rules were identified to represent additional diagnostic knowledge that is unique to the RE. Over 50 generic and 250 specific troubleshooting rules have been derived. REDEX is implemented in Prolog on an IBM PC AT-compatible workstation. Block diagram graphics displays are color-coded to identify signals that have been monitored or inferred to have nominal values, signals that are out of tolerance, and circuit cards and functions that are diagnosed as faulty. A hypertext-like scheme is used to allow the user to easily navigate through the space of diagrams and tables. Over 50 graphic and tabular displays have been implemented. REDEX is currently being evaluated in a stand-alone mode using simulated RE fault scenarios. It will soon be interfaced to the RE and tested in an online environment. When completed and fielded, REDEX will be a concrete example of the application of expert systems technology to the problem of improving performance and reducing the lifecycle costs of operating NASA's communications networks in the 1990's.

REDEX - The ranging equipment diagnostic expert system

NASA Astrophysics Data System (ADS)

Luczak, Edward C.; Gopalakrishnan, K.; Zillig, David J.

REDEX, an advanced prototype expert system that diagnoses hardware failures in the Ranging Equipment (RE) at NASA's Ground Network tracking stations is described. REDEX will help the RE technician identify faulty circuit cards or modules that must be replaced, and thereby reduce troubleshooting time. It features a highly graphical user interface that uses color block diagrams and layout diagrams to illustrate the location of a fault. A semantic network knowledge representation technique was used to model the design structure of the RE. A catalog of generic troubleshooting rules was compiled to represent heuristics that are applied in diagnosing electronic equipment. Specific troubleshooting rules were identified to represent additional diagnostic knowledge that is unique to the RE. Over 50 generic and 250 specific troubleshooting rules have been derived. REDEX is implemented in Prolog on an IBM PC AT-compatible workstation. Block diagram graphics displays are color-coded to identify signals that have been monitored or inferred to have nominal values, signals that are out of tolerance, and circuit cards and functions that are diagnosed as faulty. A hypertext-like scheme is used to allow the user to easily navigate through the space of diagrams and tables. Over 50 graphic and tabular displays have been implemented. REDEX is currently being evaluated in a stand-alone mode using simulated RE fault scenarios. It will soon be interfaced to the RE and tested in an online environment. When completed and fielded, REDEX will be a concrete example of the application of expert systems technology to the problem of improving performance and reducing the lifecycle costs of operating NASA's communications networks in the 1990s.

REDEX: The ranging equipment diagnostic expert system

NASA Astrophysics Data System (ADS)

Luczak, Edward C.; Gopalakrishnan, K.; Zillig, David J.

1989-04-01

REDEX, an advanced prototype expert system that diagnoses hardware failures in the Ranging Equipment (RE) at NASA's Ground Network tracking stations is described. REDEX will help the RE technician identify faulty circuit cards or modules that must be replaced, and thereby reduce troubleshooting time. It features a highly graphical user interface that uses color block diagrams and layout diagrams to illustrate the location of a fault. A semantic network knowledge representation technique was used to model the design structure of the RE. A catalog of generic troubleshooting rules was compiled to represent heuristics that are applied in diagnosing electronic equipment. Specific troubleshooting rules were identified to represent additional diagnostic knowledge that is unique to the RE. Over 50 generic and 250 specific troubleshooting rules have been derived. REDEX is implemented in Prolog on an IBM PC AT-compatible workstation. Block diagram graphics displays are color-coded to identify signals that have been monitored or inferred to have nominal values, signals that are out of tolerance, and circuit cards and functions that are diagnosed as faulty. A hypertext-like scheme is used to allow the user to easily navigate through the space of diagrams and tables. Over 50 graphic and tabular displays have been implemented. REDEX is currently being evaluated in a stand-alone mode using simulated RE fault scenarios. It will soon be interfaced to the RE and tested in an online environment. When completed and fielded, REDEX will be a concrete example of the application of expert systems technology to the problem of improving performance and reducing the lifecycle costs of operating NASA's communications networks in the 1990's.

Leadership in Undergraduate Medical Education: Training Future Physician Leaders.

PubMed

Clyne, Brian; Rapoza, Brenda; George, Paul

2015-09-01

To confront the challenges facing modern health care, experts and organizations are calling for an increase in physician leadership capabilities. In response to this need, physician leadership programs are proliferating, targeting all levels of experience at all levels of training. Many academic medical centers, major universities, and specialty societies now sponsor physician leadership training programs. To meet this need, The Warren Alpert Medical School of Brown University, as part of its Primary Care-Population Medicine (PC-PM) Program, designed a four-year integrated curriculum, Leadership in Health Care, to engage with leadership topics starting early in the preclinical stages of training. This paper describes the design and implementation of this leadership curriculum for PC-PM students.

Bayesian bivariate meta-analysis of diagnostic test studies with interpretable priors.

PubMed

Guo, Jingyi; Riebler, Andrea; Rue, Håvard

2017-08-30

In a bivariate meta-analysis, the number of diagnostic studies involved is often very low so that frequentist methods may result in problems. Using Bayesian inference is particularly attractive as informative priors that add a small amount of information can stabilise the analysis without overwhelming the data. However, Bayesian analysis is often computationally demanding and the selection of the prior for the covariance matrix of the bivariate structure is crucial with little data. The integrated nested Laplace approximations method provides an efficient solution to the computational issues by avoiding any sampling, but the important question of priors remain. We explore the penalised complexity (PC) prior framework for specifying informative priors for the variance parameters and the correlation parameter. PC priors facilitate model interpretation and hyperparameter specification as expert knowledge can be incorporated intuitively. We conduct a simulation study to compare the properties and behaviour of differently defined PC priors to currently used priors in the field. The simulation study shows that the PC prior seems beneficial for the variance parameters. The use of PC priors for the correlation parameter results in more precise estimates when specified in a sensible neighbourhood around the truth. To investigate the usage of PC priors in practice, we reanalyse a meta-analysis using the telomerase marker for the diagnosis of bladder cancer and compare the results with those obtained by other commonly used modelling approaches. Copyright © 2017 John Wiley & Sons, Ltd. Copyright © 2017 John Wiley & Sons, Ltd.

[Telematics equipment for poison control surveillance. Its applications in the health management of relevant chemical incidents].

PubMed

Butera, R; Locatelli, C; Gandini, C; Minuco, G; Mazzoleni, M C; Giordano, A; Zanuti, M; Varango, C; Petrolini, V; Candura, S M; Manzo, L

1997-01-01

Health management of major chemical incidents requires a close collaboration between rescuers (on the disaster site and in the emergency department) and the poison center. The study tested telematic technologies allowing telepresence and teleconsulting, a real time and continuous connection among health care personnel and toxicologists involved in the management of the emergency. The link between the poison center (PC) and the emergency department in the local hospital is provided by a ISDN operating video conferencing system, while the data transmission from the site of the accident to the PC is achieved with a personal computer and GSM cellular data transmission. Toxicological databases and risk assessment software are integrated in the system, to support information sharing. To test such instruments in operative nearly realistic conditions, the main phase of the study has implemented simulated chemical disasters in different locations in Italy. Instruments for telepresence and teleconsulting have been effectively utilized to evaluate from a remote location the scenario and the severity of the accident, by inspecting either specific details or the whole scene, to enable PC guiding the triage of the victims before and after hospitalization, to utilize and share data, such as intervention protocols or patient records, and to document all the activities. In summary, this experience shows that the telematic link allows the toxicologists of the poison center to rapidly understand the situation, and to correctly learn about the conditions of patients with the help of images. The results of this study indicate the valuable benefits of telematic instruments for the health care in case of major chemical disasters occurring in a remote geographical location or in an area which lacks local toxicological experts, where specialized expertise can be achieved by the use of telematic technologies.

39 CFR 501.16 - PC postage payment methodology.

Code of Federal Regulations, 2010 CFR

2010-07-01

... DISTRIBUTE POSTAGE EVIDENCING SYSTEMS § 501.16 PC postage payment methodology. (a) The PC Postage customer is... issues a refund to a customer for any unused postage in a Postage Evidencing System. After verification... Service approval to continue to operate PC Postage systems, the provider must submit to a periodic audit...

Evaluation of Physician and Nurse Dyad Training Procedures to Deliver a Palliative and End-of-Life Communication Intervention to Parents of Children with a Brain Tumor

PubMed Central

Hendricks-Ferguson, Verna L.; Kane, Javier R.; Pradhan, Kamnesh R.; Shih, Chie-Schin; Gauvain, Karen M.; Baker, Justin N.; Haase, Joan E.

2017-01-01

When a child’s prognosis is poor, physicians and nurses (MDs/RNs) often struggle with initiating discussions about palliative and end-of-life care (PC/EOL) early in the course of illness trajectory. We describe evaluation of training procedures used to prepare MD/RN dyads to deliver an intervention entitled: Communication Plan: Early Through End of Life (COMPLETE) intervention. Our training was delivered to 5 pediatric neuro-oncologists and 8 pediatric nurses by a team of expert consultants (i.e., in medical ethics, communication, and PC/EOL) and parent advisors. Although half of the group received training in a 1-day program and half in a 2-day program, content for all participants included 4 modules: family assessment, goal-directed treatment planning, anticipatory guidance, and staff communication and follow-up. Evaluations included dichotomous ratings and qualitative comments on content, reflection, and skills practice for each module. Positive aspects of our training included parent advisers’ insights, emphasis on hope and non-abandonment messages, written materials to facilitate PC/EOL communication, and an MD/RN dyad approach. Lessons learned and challenges related to our training procedures will be described. Overall, the MDs and RNs reported that our PC/EOL communication-training procedures were helpful and useful. Future investigators should carefully plan training procedures for PC/EOL communication interventions. PMID:25623029

Character selecting advisor for a role-playing game

NASA Technical Reports Server (NTRS)

Redfield, Carol L.; Berlanga, Felicia

1994-01-01

Role-playing games have been a source of much pleasure and merriment for people of all ages. The process of developing a character for a role-playing game is usually very, very time consuming, delaying what many players consider the most entertaining part of the game. An expert system has been written to assist a player in creating a character by guiding the player through a series of questions. This paper discusses the selection of this topic, the knowledge engineering, the software development, and the resulting program that cuts the time of character development from about 4 hours to 30 minutes. The program was written on a PC and an Apollo in CLIPS 4.3 and currently runs on the Apollo.

An evaluation of Turbo Prolog with an emphasis on its application to the development of expert systems

NASA Technical Reports Server (NTRS)

Loftin, Richard B.

1987-01-01

Turbo Prolog is a recently available, compiled version of the programming language Prolog. Turbo Prolog is designed to provide not only a Prolog compiler, but also a program development environment for the IBM Personal Computer family. An evaluation of Turbo Prolog was made, comparing its features to other versions of Prolog and to the community of languages commonly used in artificial intelligence (AI) research and development. Three programs were employed to determine the execution speed of Turbo Prolog applied to various problems. The results of this evaluation demonstrated that Turbo Prolog can perform much better than many commonly employed AI languages for numerically intensive problems and can equal the speed of development languages such as OPS5+ and CLIPS, running on the IBM PC. Applications for which Turbo Prolog is best suited include those which (1) lend themselves naturally to backward-chaining approaches, (2) require extensive use of mathematics, (3) contain few rules, (4) seek to make use of the window/color graphics capabilities of the IBM PC, and (5) require linkage to programs in other languages to form a complete executable image.

A simple and sensitive method to measure timing accuracy.

PubMed

De Clercq, Armand; Crombez, Geert; Buysse, Ann; Roeyers, Herbert

2003-02-01

Timing accuracy in presenting experimental stimuli (visual information on a PC or on a TV) and responding (keyboard presses and mouse signals) is of importance in several experimental paradigms. In this article, a simple system for measuring timing accuracy is described. The system uses two PCs (at least Pentium II, 200 MHz), a photocell, and an amplifier. No additional boards and timing hardware are needed. The first PC, a SlavePC, monitors the keyboard presses or mouse signals from the PC under test and uses a photocell that is placed in front of the screen to detect the appearance of visual stimuli on the display. The software consists of a small program running on the SlavePC. The SlavePC is connected through a serial line with a second PC. This MasterPC controls the SlavePC through an ActiveX control, which is used in a Visual Basic program. The accuracy of our system was investigated by using a similar setup of a SlavePC and a MasterPC to generate pulses and by using a pulse generator card. These tests revealed that our system has a 0.01-msec accuracy. As an illustration, the reaction time accuracy of INQUISIT for a few applications was tested using our system. It was found that in those applications that we investigated, INQUISIT measures reaction times from keyboard presses with millisecond accuracy.

Computerized tool mark comparison

NASA Astrophysics Data System (ADS)

Feigin, Gavriel; Aperman, Arie; Springer, Eliot; Jungmann, Noam

1995-09-01

The computerized toolmark comparison system is based on a cross correlation between a striation mark left by a tool on a lock and a test mark made by a suspect or the data base. The cross correlation is applied in the frequency domain for time saving. The area to be correlated is defined by the toolmark expert. A profile line is calculated and displayed based on the defined area. The two compared images may appear relatively shifted to one another, or only part of the toolmark that appears in the other. The same length of profiles is chosen from the two samples for entering to the updated correlation process. All possible correlations are checked by cutting and shifting through all cobinations. The database contains the defined images and the profiles calculated from them. The system consists of a 486 PC with a frame grabber and a video camera attached to a microscope. Results show that if the striation marks are clear and are wider than a minimum pixel limit, the correlation result higher than 0.6 is a possible match and has to be checked by the expert for a final decision. Future plans are to implement a 2D correlation. This method will enable us to deal with combinations of striations which are found frequently in real case work.

Conference on Real-Time Computer Applications in Nuclear, Particle and Plasma Physics, 6th, Williamsburg, VA, May 15-19, 1989, Proceedings

NASA Technical Reports Server (NTRS)

Pordes, Ruth (Editor)

1989-01-01

Papers on real-time computer applications in nuclear, particle, and plasma physics are presented, covering topics such as expert systems tactics in testing FASTBUS segment interconnect modules, trigger control in a high energy physcis experiment, the FASTBUS read-out system for the Aleph time projection chamber, a multiprocessor data acquisition systems, DAQ software architecture for Aleph, a VME multiprocessor system for plasma control at the JT-60 upgrade, and a multiasking, multisinked, multiprocessor data acquisition front end. Other topics include real-time data reduction using a microVAX processor, a transputer based coprocessor for VEDAS, simulation of a macropipelined multi-CPU event processor for use in FASTBUS, a distributed VME control system for the LISA superconducting Linac, a distributed system for laboratory process automation, and a distributed system for laboratory process automation. Additional topics include a structure macro assembler for the event handler, a data acquisition and control system for Thomson scattering on ATF, remote procedure execution software for distributed systems, and a PC-based graphic display real-time particle beam uniformity.

AMPS/PC - AUTOMATIC MANUFACTURING PROGRAMMING SYSTEM

NASA Technical Reports Server (NTRS)

Schroer, B. J.

1994-01-01

The AMPS/PC system is a simulation tool designed to aid the user in defining the specifications of a manufacturing environment and then automatically writing code for the target simulation language, GPSS/PC. The domain of problems that AMPS/PC can simulate are manufacturing assembly lines with subassembly lines and manufacturing cells. The user defines the problem domain by responding to the questions from the interface program. Based on the responses, the interface program creates an internal problem specification file. This file includes the manufacturing process network flow and the attributes for all stations, cells, and stock points. AMPS then uses the problem specification file as input for the automatic code generator program to produce a simulation program in the target language GPSS. The output of the generator program is the source code of the corresponding GPSS/PC simulation program. The system runs entirely on an IBM PC running PC DOS Version 2.0 or higher and is written in Turbo Pascal Version 4 requiring 640K memory and one 360K disk drive. To execute the GPSS program, the PC must have resident the GPSS/PC System Version 2.0 from Minuteman Software. The AMPS/PC program was developed in 1988.

Translating and testing the ENABLE: CHF-PC concurrent palliative care model for older adults with heart failure and their family caregivers.

PubMed

Dionne-Odom, J Nicholas; Kono, Alan; Frost, Jennifer; Jackson, Lisa; Ellis, Daphne; Ahmed, Ali; Azuero, Andres; Bakitas, Marie

2014-09-01

Heart failure (HF) and palliative care (PC) organizations recommend early PC to improve the quality of life of patients living with HF. We conducted a two-phase formative evaluation study to translate a cancer-focused concurrent PC intervention into one that would be appropriate for rural-dwelling adults with New York Heart Association Class III-IV HF and their primary caregivers. Phase I: We tailored the intervention for an HF population via literature review, expert consultation, and clinician (N=15) small group interviews. Phase II: We enrolled 11 patient/caregiver dyads to assess intervention feasibility and satisfaction. We assessed participants' experiences and satisfaction after session/week three and session/week six via digitally recorded interviews. Clinician and participant interviews were transcribed and content analyzed. Outcome measures were evaluated for completion rates and effect sizes. Phase I: Clinicians described barriers to initiating PC in HF, triggers for initiating PC, and suggestions for intervention improvement. Phase II: Participants were able to complete the majority of study sessions, measures, and interviews. Satisfaction interviews revealed the content to be relevant and comprehensive in addressing HF patient and caregiver primary concerns; however, participants unanimously suggested making the intervention available earlier in the illness trajectory. Efficacy measures demonstrated small to medium effect sizes. We tailored and demonstrated feasibility of providing an early, concurrent palliative care intervention to patients with advanced HF and their caregivers. Based on this experience we are now conducting an efficacy trial in a racially diverse sample.

Reviews

NASA Astrophysics Data System (ADS)

2008-03-01

WE RECOMMEND Doomsday Men: the Real Dr Strangelove and the Dream of the Superweapon The relationship between scientists and ethics is explored in this fascinating history of superweaponry RAF Real-life Science A CD-ROM that combines physics activities and careers advice Seismology A booklet that covers seismology for the classroom thoroughly Ice, Rock, and Beauty: a Visual Tour of the New Solar System A beautiful book on a beautiful subject Leicester Height Measure A surprisingly multipurpose piece of equipment Learning Science Teaching: Developing a Professional Knowledge Base A study of how to become an expert science teacher Nova 5000EX A tablet PC ready-loaded with all of the software you need Seismometer Modelling Kit A useful and cheap demonstration of seismology Vibration Detector Basic equipment for measuring vibrations is very welcome Seismometer System This more advanced seismology kit is worth the price-tag WEB WATCH Gary Williams trawls the net for Earth science classroom aids

PV-Diesel Hybrid SCADA Experiment Network Design

NASA Technical Reports Server (NTRS)

Kalu, Alex; Durand, S.; Emrich, Carol; Ventre, G.; Wilson, W.; Acosta, R.

1999-01-01

The essential features of an experimental network for renewable power system satellite based supervisory, control and data acquisition (SCADA) are communication links, controllers, diagnostic equipment and a hybrid power system. Required components for implementing the network consist of two satellite ground stations, to satellite modems, two 486 PCs, two telephone receivers, two telephone modems, two analog telephone lines, one digital telephone line, a hybrid-power system equipped with controller and a satellite spacecraft. In the technology verification experiment (TVE) conducted by Savannah State University and Florida Solar Energy Center, the renewable energy hybrid system is the Apex-1000 Mini-Hybrid which is equipped with NGC3188 for user interface and remote control and the NGC2010 for monitoring and basic control tasks. This power system is connected to a satellite modem via a smart interface, RS232. Commands are sent to the power system control unit through a control PC designed as PC1. PC1 is thus connected to a satellite model through RS232. A second PC, designated PC2, the diagnostic PC is connected to both satellite modems via separate analog telephone lines for checking modems'health. PC2 is also connected to PC1 via a telephone line. Due to the unavailability of a second ground station for the ACTS, one ground station is used to serve both the sending and receiving functions in this experiment. Signal is sent from the control PC to the Hybrid system at a frequency f(sub 1), different from f(sub 2), the signal from the hybrid system to the control PC. f(sub l) and f(sub 2) are sufficiently separated to avoid interference.

Political, cultural and economic foundations of primary care in Europe.

PubMed

Kringos, Dionne S; Boerma, Wienke G W; van der Zee, Jouke; Groenewegen, Peter P

2013-12-01

This article explores various contributing factors to explain differences in the strength of the primary care (PC) structure and services delivery across Europe. Data on the strength of primary care in 31 European countries in 2009/10 were used. The results showed that the national political agenda, economy, prevailing values, and type of healthcare system are all important factors that influence the development of strong PC. Wealthier countries are associated with a weaker PC structure and lower PC accessibility, while Eastern European countries seemed to have used their growth in national income to strengthen the accessibility and continuity of PC. Countries governed by left-wing governments are associated with a stronger PC structure, accessibility and coordination of PC. Countries with a social-security based system are associated with a lower accessibility and continuity of PC; the opposite is true for transitional systems. Cultural values seemed to affect all aspects of PC. It can be concluded that strengthening PC means mobilising multiple leverage points, policy options, and political will in line with prevailing values in a country. Copyright © 2013 Elsevier Ltd. All rights reserved.

The design of PC/MISI, a PC-based common user interface to remote information storage and retrieval systems. Presentation visuals. M.S. Thesis Final Report, 1 Jul. 1985 - 31 Dec. 1987

NASA Technical Reports Server (NTRS)

Dominick, Wayne D. (Editor); Hall, Philip P.

1985-01-01

This Working Paper Series entry represents a collection of presentation visuals associated with the companion report entitled, The Design of PC/MISI, a PC-Based Common User Interface to Remote Information Storage and Retrieval Systems, USL/DBMS NASA/RECON Working Paper Series report number DBMS.NASA/RECON-15. The paper discusses the following: problem definition; the PC solution; the goals of system design; the design description; future considerations, the research environment; conclusions.

Easy PC Astronomy

NASA Astrophysics Data System (ADS)

Duffett-Smith, Peter

1996-11-01

Easy PC Astronomy is the perfect book for everyone who wants to make easy and accurate astronomical calculations. The author supplies a simple but powerful script language called AstroScript on a disk, ready to use on any IBM PC-type computer. Equipped with this software, readers can compute complex but interesting astronomical results within minutes: from the time of moonrise or moonset anywhere in the world on any date, to the display of a lunar or solar eclipse on the computer screen--all within a few minutes of opening the book! The Sky Graphics feature of the software displays a detailed image of the sky as seen from any point on earth--at any time in the future or past--showing the constellations, planets, and a host of other features. Readers need no expert knowledge of astronomy, math or programming; the author provides full details of the calculations and formulas, which the reader can absorb or ignore as desired, and a comprehensive glossary of astronomical terms. Easy PC Astronomy is of immediate practical use to beginning and advanced amateur astronomers, students at all levels, science teachers, and research astronomers. Peter Duffett-Smith is at the Cavendish Laboratory of the University of Cambridge and is the author of Astronomy with Your Personal Computer (Cambridge University Press, 1990) and Practical Astronomy with Your Calculator (Cambridge University Press, 1989).

Development and Validation of a Questionnaire to Assess Multimorbidity in Primary Care: An Indian Experience.

PubMed

Pati, Sanghamitra; Hussain, Mohammad Akhtar; Swain, Subhashisa; Salisbury, Chris; Metsemakers, Job F M; Knottnerus, J André; van den Akker, Marjan

2016-01-01

Multimorbidity remains an underexplored domain in Indian primary care. We undertook a study to assess the prevalence, correlates, and outcomes of multimorbidity in primary care settings in India. This paper describes the process of development and validation of our data collection tool "Multimorbidity Assessment Questionnaire for Primary Care (MAQ-PC)." An iterative process comprising desk review, chart review, and expert consultations was undertaken to generate the questionnaire. The MAQ-PC contained items on chronic conditions, health care utilization, health related quality of life, disease severity, and sociodemographics. It was first tested with twelve adults for comprehensibility followed by test-retest reliability with 103 patients from four primary care practices. For interrater reliability, two interviewers separately administered the questionnaire to sixteen patients. MAQ-PC displayed strong internal consistency (Cronbach's alpha: 0.69), interrater reliability (Cohen's Kappa: 0.78-1), and test-retest reliability (ICC: 0.970-0.741). Substantial concordance between self-report and physician diagnosis (Scott Kappa: 0.59-1.0) was observed for listed chronic conditions indicating strong concurrent validity. Nearly 54% had one chronic condition and 23.3% had multimorbidity. Our findings demonstrate MAQ-PC to be a valid and reliable measure of multimorbidity in primary care practice and suggest its potential utility in multimorbidity research in India.

Evaluation of Physician and Nurse Dyad Training Procedures to Deliver a Palliative and End-of-Life Communication Intervention to Parents of Children with a Brain Tumor.

PubMed

Hendricks-Ferguson, Verna L; Kane, Javier R; Pradhan, Kamnesh R; Shih, Chie-Schin; Gauvain, Karen M; Baker, Justin N; Haase, Joan E

2015-01-01

When a child's prognosis is poor, physicians and nurses (MDs/RNs) often struggle with initiating discussions about palliative and end-of-life care (PC/EOL) early in the course of illness trajectory. We describe evaluation of training procedures used to prepare MD/RN dyads to deliver an intervention entitled: Communication Plan: Early Through End of Life (COMPLETE) intervention. Our training was delivered to 5 pediatric neuro-oncologists and 8 pediatric nurses by a team of expert consultants (i.e., in medical ethics, communication, and PC/EOL) and parent advisors. Although half of the group received training in a 1-day program and half in a 2-day program, content for all participants included 4 modules: family assessment, goal-directed treatment planning, anticipatory guidance, and staff communication and follow-up. Evaluations included dichotomous ratings and qualitative comments on content, reflection, and skills practice for each module. Positive aspects of our training included parent advisers' insights, emphasis on hope and non-abandonment messages, written materials to facilitate PC/EOL communication, and an MD/RN dyad approach. Lessons learned and challenges related to our training procedures will be described. Overall, the MDs and RNs reported that our PC/EOL communication-training procedures were helpful and useful. Future investigators should carefully plan training procedures for PC/EOL communication interventions. © 2015 by Association of Pediatric Hematology/Oncology Nurses.

Integration of oncology and palliative care: setting a benchmark.

PubMed

Vayne-Bossert, P; Richard, E; Good, P; Sullivan, K; Hardy, J R

2017-10-01

Integration of oncology and palliative care (PC) should be the standard model of care for patients with advanced cancer. An expert panel developed criteria that constitute integration. This study determined whether the PC service within this Health Service, which is considered to be fully "integrated", could be benchmarked against these criteria. A survey was undertaken to determine the perceived level of integration of oncology and palliative care by all health care professionals (HCPs) within our cancer centre. An objective determination of integration was obtained from chart reviews of deceased patients. Integration was defined as >70% of all respondents answered "agree" or "strongly agree" to each indicator and >70% of patient charts supported each criteria. Thirty-four HCPs participated in the survey (response rate 69%). Over 90% were aware of the outpatient PC clinic, interdisciplinary and consultation team, PC senior leadership, and the acceptance of concurrent anticancer therapy. None of the other criteria met the 70% agreement mark but many respondents lacked the necessary knowledge to respond. The chart review included 67 patients, 92% of whom were seen by the PC team prior to death. The median time from referral to death was 103 days (range 0-1347). The level of agreement across all criteria was below our predefined definition of integration. The integration criteria relating to service delivery are medically focused and do not lend themselves to interdisciplinary review. The objective criteria can be audited and serve both as a benchmark and a basis for improvement activities.

An Electronic Tree Inventory for Arboriculture Management

NASA Astrophysics Data System (ADS)

Tait, Roger J.; Allen, Tony J.; Sherkat, Nasser; Bellett-Travers, Marcus D.

The integration of Global Positioning System (GPS) technology into mobile devices provides them with an awareness of their physical location. This geospatial context can be employed in a wide range of applications including locating nearby places of interest as well as guiding emergency services to incidents. In this research, a GPS-enabled Personal Digital Assistant (PDA) is used to create a computerised tree inventory for the management of arboriculture. Using the General Packet Radio Service (GPRS), GPS information and arboreal image data are sent to a web-server. An office-based PC running customised Geographical Information Software (GIS) then automatically retrieves the GPS tagged image data for display and analysis purposes. The resulting application allows an expert user to view the condition of individual trees in greater detail than is possible using remotely sensed imagery.

Motion-aware stroke volume quantification in 4D PC-MRI data of the human aorta.

PubMed

Köhler, Benjamin; Preim, Uta; Grothoff, Matthias; Gutberlet, Matthias; Fischbach, Katharina; Preim, Bernhard

2016-02-01

4D PC-MRI enables the noninvasive measurement of time-resolved, three-dimensional blood flow data that allow quantification of the hemodynamics. Stroke volumes are essential to assess the cardiac function and evolution of different cardiovascular diseases. The calculation depends on the wall position and vessel orientation, which both change during the cardiac cycle due to the heart muscle contraction and the pumped blood. However, current systems for the quantitative 4D PC-MRI data analysis neglect the dynamic character and instead employ a static 3D vessel approximation. We quantify differences between stroke volumes in the aorta obtained with and without consideration of its dynamics. We describe a method that uses the approximating 3D segmentation to automatically initialize segmentation algorithms that require regions inside and outside the vessel for each temporal position. This enables the use of graph cuts to obtain 4D segmentations, extract vessel surfaces including centerlines for each temporal position and derive motion information. The stroke volume quantification is compared using measuring planes in static (3D) vessels, planes with fixed angulation inside dynamic vessels (this corresponds to the common 2D PC-MRI) and moving planes inside dynamic vessels. Seven datasets with different pathologies such as aneurysms and coarctations were evaluated in close collaboration with radiologists. Compared to the experts' manual stroke volume estimations, motion-aware quantification performs, on average, 1.57% better than calculations without motion consideration. The mean difference between stroke volumes obtained with the different methods is 7.82%. Automatically obtained 4D segmentations overlap by 85.75% with manually generated ones. Incorporating motion information in the stroke volume quantification yields slight but not statistically significant improvements. The presented method is feasible for the clinical routine, since computation times are low and essential parts run fully automatically. The 4D segmentations can be used for other algorithms as well. The simultaneous visualization and quantification may support the understanding and interpretation of cardiac blood flow.

PC-based Multiple Information System Interface (PC/MISI) detailed design and implementation plan

NASA Technical Reports Server (NTRS)

Dominick, Wayne D. (Editor); Hall, Philip P.

1985-01-01

The design plan for the personal computer multiple information system interface (PC/MISI) project is discussed. The document is intended to be used as a blueprint for the implementation of the system. Each component is described in the detail necessary to allow programmers to implement the system. A description of the system data flow and system file structures is given.

Laboratory process control using natural language commands from a personal computer

NASA Technical Reports Server (NTRS)

Will, Herbert A.; Mackin, Michael A.

1989-01-01

PC software is described which provides flexible natural language process control capability with an IBM PC or compatible machine. Hardware requirements include the PC, and suitable hardware interfaces to all controlled devices. Software required includes the Microsoft Disk Operating System (MS-DOS) operating system, a PC-based FORTRAN-77 compiler, and user-written device drivers. Instructions for use of the software are given as well as a description of an application of the system.

The Solar Neighborhood XLIV: RECONS Discoveries within 10 parsecs

NASA Astrophysics Data System (ADS)

Henry, Todd J.; Jao, Wei-Chun; Winters, Jennifer G.; Dieterich, Sergio B.; Finch, Charlie T.; Ianna, Philip A.; Riedel, Adric R.; Silverstein, Michele L.; Subasavage, John P.; Halley Vrijmoet, Eliot

2018-06-01

We describe the 44 systems discovered to be within 10 pc of the Sun by the RECONS team, primarily via the long-term astrometry program at the CTIO/SMARTS 0.9 m that began in 1999. The systems—including 41 with red dwarf primaries, 2 white dwarfs, and 1 brown dwarf—have trigonometric parallaxes greater than 100 mas, with errors of 0.4–2.4 mas in all but one case. We provide updated astrometric, photometric (VRIJHK magnitudes), spectral type, and multiplicity information here. Among these are 14 systems that are new entries to the 10 pc sample, including the first parallaxes for 9 systems and new values for 5 systems that had previous parallaxes with errors greater than 10 mas or values placing them beyond 10 pc. We also provide new data for 22 systems known to lie within 10 pc and 9 systems reported to be closer than that horizon but for which new parallaxes place them further away, bringing the total to 75 systems. The 44 systems added by RECONS comprise one of every 7 systems known within 10 pc. We illustrate the evolution of the 10 pc sample from the 191 systems known when the final Yale Parallax Catalog was published in 1995 to the 317 systems known today. Even so close to the Sun, additional discoveries of white, red, and brown dwarfs are possible, both as primaries and secondaries, although we estimate that at least 90% of the stellar systems closer than 10 pc have now been identified.

39 CFR 501.1 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... limited to postage meters and PC Postage systems. (b) A postage meter is a Postal Service-approved Postage... this part refers to a postage meter. (c) PC Postage products are Postal Service-approved Postage Evidencing Systems that use a personal computer as an integral part of the system. PC Postage products may...

The USL NASA PC R and D project: General specifications of objectives

NASA Technical Reports Server (NTRS)

Dominick, Wayne D. (Editor)

1984-01-01

Given here are the general specifications of the objectives of the University of Southwestern Louisiana Data Base Management System (USL/DBMS) NASA PC R and D Project, a project initiated to address future R and D issues related to PC-based processing environments acquired pursuant to the NASA contract work; namely, the IBM PC/XT systems.

Definition of variables required for comprehensive description of drug dosage and clinical pharmacokinetics.

PubMed

Medem, Anna V; Seidling, Hanna M; Eichler, Hans-Georg; Kaltschmidt, Jens; Metzner, Michael; Hubert, Carina M; Czock, David; Haefeli, Walter E

2017-05-01

Electronic clinical decision support systems (CDSS) require drug information that can be processed by computers. The goal of this project was to determine and evaluate a compilation of variables that comprehensively capture the information contained in the summary of product characteristic (SmPC) and unequivocally describe the drug, its dosage options, and clinical pharmacokinetics. An expert panel defined and structured a set of variables and drafted a guideline to extract and enter information on dosage and clinical pharmacokinetics from textual SmPCs as published by the European Medicines Agency (EMA). The set of variables was iteratively revised and evaluated by data extraction and variable allocation of roughly 7% of all centrally approved drugs. The information contained in the SmPC was allocated to three information clusters consisting of 260 variables. The cluster "drug characterization" specifies the nature of the drug. The cluster "dosage" provides information on approved drug dosages and defines corresponding specific conditions. The cluster "clinical pharmacokinetics" includes pharmacokinetic parameters of relevance for dosing in clinical practice. A first evaluation demonstrated that, despite the complexity of the current free text SmPCs, dosage and pharmacokinetic information can be reliably extracted from the SmPCs and comprehensively described by a limited set of variables. By proposing a compilation of variables well describing drug dosage and clinical pharmacokinetics, the project represents a step forward towards the development of a comprehensive database system serving as information source for sophisticated CDSS.

A PC-based telemetry system for acquiring and reducing data from multiple PCM streams

NASA Astrophysics Data System (ADS)

Simms, D. A.; Butterfield, C. P.

1991-07-01

The Solar Energy Research Institute's (SERI) Wind Research Program is using Pulse Code Modulation (PCM) Telemetry Data-Acquisition Systems to study horizontal-axis wind turbines. Many PCM systems are combined for use in test installations that require accurate measurements from a variety of different locations. SERI has found them ideal for data-acquisition from multiple wind turbines and meteorological towers in wind parks. A major problem has been in providing the capability to quickly combine and examine incoming data from multiple PCM sources in the field. To solve this problem, SERI has developed a low-cost PC-based PCM Telemetry Data-Reduction System (PC-PCM System) to facilitate quick, in-the-field multiple-channel data analysis. The PC-PCM System consists of two basic components. First, PC-compatible hardware boards are used to decode and combine multiple PCM data streams. Up to four hardware boards can be installed in a single PC, which provides the capability to combine data from four PCM streams directly to PC disk or memory. Each stream can have up to 62 data channels. Second, a software package written for use under DOS was developed to simplify data-acquisition control and management. The software, called the Quick-Look Data Management Program, provides a quick, easy-to-use interface between the PC and multiple PCM data streams. The Quick-Look Data Management Program is a comprehensive menu-driven package used to organize, acquire, process, and display information from incoming PCM data streams. The paper describes both hardware and software aspects of the SERI PC-PCM system, concentrating on features that make it useful in an experiment test environment to quickly examine and verify incoming data from multiple PCM streams. Also discussed are problems and techniques associated with PC-based telemetry data-acquisition, processing, and real-time display.

PC Tutor. Bericht uber ein PC-gestutzes Tutorensystem = PC Tutor. Report on a Tutoring System with Personal Computer. ZIFF Papiere 75.

ERIC Educational Resources Information Center

Fritsch, Helmut

A project was conducted to increase as well as to professionalize communication between tutors and learners in a West German university's distance education program by the use of personal computers. Two tutors worked on the systematic development of a PC-based correcting system. The goal, apart from developing general language skills in English,…

General specifications for the development of a USL/DBMS NASA/PC R and D distributed workstation

NASA Technical Reports Server (NTRS)

Dominick, Wayne D. (Editor); Chum, Frank Y.

1984-01-01

The general specifications for the development of a PC-based distributed workstation (PCDWS) for an information storage and retrieval systems environment are defined. This research proposes the development of a PCDWS prototype as part of the University of Southwestern Louisiana Data Base Management System (USL/DBMS) NASA/PC R and D project in the PC-based workstation environment.

Metabolic system alterations in pancreatic cancer patient serum: potential for early detection

PubMed Central

2013-01-01

Background The prognosis of pancreatic cancer (PC) is one of the poorest among all cancers, due largely to the lack of methods for screening and early detection. New biomarkers for identifying high-risk or early-stage subjects could significantly impact PC mortality. The goal of this study was to find metabolic biomarkers associated with PC by using a comprehensive metabolomics technology to compare serum profiles of PC patients to healthy control subjects. Methods A non-targeted metabolomics approach based on high-resolution, flow-injection Fourier transform ion cyclotron resonance mass spectrometry (FI-FTICR-MS) was used to generate comprehensive metabolomic profiles containing 2478 accurate mass measurements from the serum of Japanese PC patients (n=40) and disease-free subjects (n=50). Targeted flow-injection tandem mass spectrometry (FI-MS/MS) assays for specific metabolic systems were developed and used to validate the FI-FTICR-MS results. A FI-MS/MS assay for the most discriminating metabolite discovered by FI-FTICR-MS (PC-594) was further validated in two USA Caucasian populations; one comprised 14 PCs, six intraductal papillary mucinous neoplasims (IPMN) and 40 controls, and a second comprised 1000 reference subjects aged 30 to 80, which was used to create a distribution of PC-594 levels among the general population. Results FI-FTICR-MS metabolomic analysis showed significant reductions in the serum levels of metabolites belonging to five systems in PC patients compared to controls (all p<0.000025). The metabolic systems included 36-carbon ultra long-chain fatty acids, multiple choline-related systems including phosphatidylcholines, lysophosphatidylcholines and sphingomyelins, as well as vinyl ether-containing plasmalogen ethanolamines. ROC-AUCs based on FI-MS/MS of selected markers from each system ranged between 0.93 ±0.03 and 0.97 ±0.02. No significant correlations between any of the systems and disease-stage, gender, or treatment were observed. Biomarker PC-594 (an ultra long-chain fatty acid), was further validated using an independently-collected US Caucasian population (blinded analysis, n=60, p=9.9E-14, AUC=0.97 ±0.02). PC-594 levels across 1000 reference subjects showed an inverse correlation with age, resulting in a drop in the AUC from 0.99 ±0.01 to 0.90 ±0.02 for subjects aged 30 to 80, respectively. A PC-594 test positivity rate of 5.0% in low-risk reference subjects resulted in a PC sensitivity of 87% and a significant improvement in net clinical benefit based on decision curve analysis. Conclusions The serum metabolome of PC patients is significantly altered. The utility of serum metabolite biomarkers, particularly PC-594, for identifying subjects with elevated risk of PC should be further investigated. PMID:24024929

Mapping High Dimensional Sparse Customer Requirements into Product Configurations

NASA Astrophysics Data System (ADS)

Jiao, Yao; Yang, Yu; Zhang, Hongshan

2017-10-01

Mapping customer requirements into product configurations is a crucial step for product design, while, customers express their needs ambiguously and locally due to the lack of domain knowledge. Thus the data mining process of customer requirements might result in fragmental information with high dimensional sparsity, leading the mapping procedure risk uncertainty and complexity. The Expert Judgment is widely applied against that background since there is no formal requirements for systematic or structural data. However, there are concerns on the repeatability and bias for Expert Judgment. In this study, an integrated method by adjusted Local Linear Embedding (LLE) and Naïve Bayes (NB) classifier is proposed to map high dimensional sparse customer requirements to product configurations. The integrated method adjusts classical LLE to preprocess high dimensional sparse dataset to satisfy the prerequisite of NB for classifying different customer requirements to corresponding product configurations. Compared with Expert Judgment, the adjusted LLE with NB performs much better in a real-world Tablet PC design case both in accuracy and robustness.

The 25 parsec local white dwarf population

NASA Astrophysics Data System (ADS)

Holberg, J. B.; Oswalt, T. D.; Sion, E. M.; McCook, G. P.

2016-11-01

We have extended our detailed survey of the local white dwarf population from 20 to 25 pc, effectively doubling the sample volume, which now includes 232 stars. In the process, new stars within 20 pc have been added, a more uniform set of distance estimates as well as improved spectral and binary classifications are available. The present 25 pc sample is estimated to be about 68 per cent complete (the corresponding 20 pc sample is now 86 per cent complete). The space density of white dwarfs is unchanged at 4.8 ± 0.5 × 10-3 pc-3. This new study includes a white dwarf mass distribution and luminosity function based on the 232 stars in the 25 pc sample. We find a significant excess of single stars over systems containing one or more companions (74 per cent versus 26 per cent). This suggests mechanisms that result in the loss of companions during binary system evolution. In addition, this updated sample exhibits a pronounced deficiency of nearby `Sirius-like' systems. 11 such systems were found within the 20 pc volume versus only one additional system found in the volume between 20 and 25 pc. An estimate of white dwarf birth rates during the last ˜8 Gyr is derived from individual remnant cooling ages. A discussion of likely ways new members of the local sample may be found is provided.

The solar neighborhood, 1: Standard spectral types (K5-M8) for northern dwarfs within eight parsecs

NASA Technical Reports Server (NTRS)

Henry, Todd J.; Kirkpatrick, J. Davy; Simons, Douglas A.

1994-01-01

Spectral types on a standard system are presented for late-type dwarfs within 8 pc. All known main-sequence stars north of -25 deg and with M(sub V) greater than or = 8.00 have been observed, resulting in 92 spectra. Based upon the stellar system density to 5 pc, we estimate that approximately 35 systems in the 8 pc sample are 'missing.' In an effort to reveal these systems, we use an empirical spectral type-M(sub V) relation to estimate distances to additional stars that may lie within 8 pc.

Detection and measurement of fetal anatomies from ultrasound images using a constrained probabilistic boosting tree.

PubMed

Carneiro, Gustavo; Georgescu, Bogdan; Good, Sara; Comaniciu, Dorin

2008-09-01

We propose a novel method for the automatic detection and measurement of fetal anatomical structures in ultrasound images. This problem offers a myriad of challenges, including: difficulty of modeling the appearance variations of the visual object of interest, robustness to speckle noise and signal dropout, and large search space of the detection procedure. Previous solutions typically rely on the explicit encoding of prior knowledge and formulation of the problem as a perceptual grouping task solved through clustering or variational approaches. These methods are constrained by the validity of the underlying assumptions and usually are not enough to capture the complex appearances of fetal anatomies. We propose a novel system for fast automatic detection and measurement of fetal anatomies that directly exploits a large database of expert annotated fetal anatomical structures in ultrasound images. Our method learns automatically to distinguish between the appearance of the object of interest and background by training a constrained probabilistic boosting tree classifier. This system is able to produce the automatic segmentation of several fetal anatomies using the same basic detection algorithm. We show results on fully automatic measurement of biparietal diameter (BPD), head circumference (HC), abdominal circumference (AC), femur length (FL), humerus length (HL), and crown rump length (CRL). Notice that our approach is the first in the literature to deal with the HL and CRL measurements. Extensive experiments (with clinical validation) show that our system is, on average, close to the accuracy of experts in terms of segmentation and obstetric measurements. Finally, this system runs under half second on a standard dual-core PC computer.

The Solar Neighborhood. XXV. Discovery of New Proper Motion Stars with 0.40 sec/yr > mu > or = 0.18 sec/yr Between Declinations -47 deg and 00 deg

NASA Technical Reports Server (NTRS)

Boyd, Mark R.; Winters, Jennifer G.; Henry, Todd J.; Jao, Wei-Chun; Finch, Charlie T.; Subasavage, John P.; Hambly, Nigel C.

2011-01-01

We present 2817 new southern proper motion systems with 0.40 sec/yr > mu > or = 0.18 sec/yr and declination between 47 deg and 00 deg. This is a continuation of the SuperCOSMOS-RECONS (SCR) proper motion searches of the southern sky. We use the same photometric relations as previous searches to provide distance estimates based on the assumption that the objects are single main-sequence stars. We find 79 new red dwarf systems predicted to be within 25 pc, including a few new components of previously known systems. Two systems--SCR 1731-2452 at 9.5 pc and SCR 1746-3214 at 9.9 pc--are anticipated to be within 10 pc. We also find 23 new white dwarf (WD) candidates with distance estimates of 15-66 pc, as well as 360 new red subdwarf candidates. With this search, we complete the SCR sweep of the southern sky for stars with mu > or = 0.18 sec/yr and R(sub 59F) < or = 16.5, resulting in a total of 5042 objects in 4724 previously unreported proper motion systems. Here we provide selected comprehensive lists from our SCR proper motion search to date, including 152 red dwarf systems estimated to be within 25 pc (9 within 10 pc), 46 WDs (10 within 25 pc), and 598 subdwarf candidates. The results of this search suggest that there are more nearby systems to be found at fainter magnitudes and lower proper motion limits than those probed so far.

A Fluid Mechanics Hypercourse

NASA Astrophysics Data System (ADS)

Fay, James A.; Sonwalkar, Nishikant

1996-05-01

This CD-ROM is designed to accompany James Fay's Introduction to Fluid Mechanics. An enhanced hypermedia version of the textbook, it offers a number of ways to explore the fluid mechanics domain. These include a complete hypertext version of the original book, physical-experiment video clips, excerpts from external references, audio annotations, colored graphics, review questions, and progressive hints for solving problems. Throughout, the authors provide expert guidance in navigating the typed links so that students do not get lost in the learning process. System requirements: Macintosh with 68030 or greater processor and with at least 16 Mb of RAM. Operating System 6.0.4 or later for 680x0 processor and System 7.1.2 or later for Power-PC. CD-ROM drive with 256- color capability. Preferred display 14 inches or above (SuperVGA with 1 megabyte of VRAM). Additional system font software: Computer Modern postscript fonts (CM/PS Screen Fonts, CMBSY10, and CMTT10) and Adobe Type Manager (ATM 3.0 or later). James A. Fay is Professor Emeritus and Senior Lecturer in the Department of Mechanical Engineering at MIT.

Cost-effectiveness analysis of pharmaceutical care for hypertensive patients from the perspective of the public health system in Brazil.

PubMed

Cazarim, Maurílio de Souza; Pereira, Leonardo Régis Leira

2018-01-01

Only 20% of patients with systemic arterial hypertension (SAH) have blood pressure within recommended parameters. SAH has been the main risk factor for morbidity and mortality of cardiovascular diseases, which affects the burden of the Public Health System (PHS). Some studies have shown the effectiveness of Pharmaceutical Care (PC) in the care of hypertensive patients. To perform a cost-effectiveness analysis to compare SAH treatment with PC management and conventional treatment for hypertensive patients offered by the PHS. A cost-effectiveness study nested to a quasi-experimental study was conducted, in which 104 hypertensive patients were followed up in a PC program. Blood pressure control was considered as the outcome for the economic analysis and the costs were direct and non-direct medical costs. PC was dominant for two years in the post-PC period compared with the pre-PC year. The mean cost effectiveness ratio (CER) for the CERPre-PC, CERPC, and CERPost-PC periods were: US$ 364.65, US$ 415.39, and US$ 231.14 respectively. The incremental cost effectiveness ratio (ICER) analysis presented ICER of US$ 478.41 in the PC period and US$ 42.95 in the post PC period. Monte Carlo sensitivity analysis presented mean ICERPC and ICERPost-PC equal to US$ 605.09 and US$ 128.03, reaching US$ 1,725.00 and US$ 740.00 respectively. Even for the highest ICER, the values were below the cost effectiveness threshold, which means that PC was a cost effective strategy for the care of hypertensive patients in the PHS.

Plasmon-enhanced photocurrent generation from self-assembled monolayers of phthalocyanine by using gold nanoparticle films.

PubMed

Sugawa, Kosuke; Akiyama, Tsuyoshi; Kawazumi, Hirofumi; Yamada, Sunao

2009-04-09

The effect of localized electric fields on the photocurrent responses of phthalocyanine that was self-assembled on a gold nanoparticle film was investigated by comparing the conventional and the total internal reflection (TIR) experimental systems. In the case of photocurrent measurements, self-assembled monolayers (SAMs) of a thiol derivative of palladium phthalocyanine (PdPc) were prepared on the surface of gold-nanoparticle film that was fixed on the surface of indium-tin-oxide (ITO) substrate via a polyion (PdPc/AuP/polyion/ITO) or on the ITO surface (PdPc/ITO). Photocurrent action spectra from the two samples were compared by using the conventional spectrometer, and were found that PdPc/AuP/polyion/ITO gave considerably larger photocurrent signals than PdPc/ITO under the identical concentration of PdPc. In the case of the TIR experiments for the PdPc/AuP/polyion/ITO and the PdPc/AuP/Glass systems, incident-angle profiles of photocurrent and emission signals were correlated with each other, and they were different from that of the PdPc/ITO system. Accordingly, it was demonstrated that the photocurrent signals were certainly enhanced by the localized electric fields of the gold-nanoparticle film.

Fabryq: Using Phones as Smart Proxies to Control Wearable Devices from the Web

DTIC Science & Technology

2014-06-12

energy efficient, embedded low power device with a short range radio; 2) a user’s mobile phone, which shows a user interface but also acts as a router...ically relays information to a companion application running on the user’s mobile phone (or PC), which in turn communi- cates with servers that the...skills in several diverse fields. Thus, experimentation in deploy- able, mobile wearable devices is largely reserved to experts, and implementation cycles

Effects of hypoxia on the closing pressure of the canine systemic arterial circulation.

PubMed

Sylvester, J T; Gilbert, R D; Traystman, R J; Permutt, S

1981-10-01

We studied the relationships among closing pressure (Pc) and indices of systemic arterial resistance (Ra) and compliance (Ca) during hypoxic hypoxia (HH) and carbon monoxide hypoxia (COH) in anesthetized dogs with cardiac bypass and constant ventilation. Closing pressure was measured as the lowest level to which arterial pressure (Pa) fell after inflow to the arterial bed was reduced suddenly to zero. Since the fall of Pa to Pc could be well-described as a single exponential function of time and since Pc was always greater than outflow (venous) pressure. Ra and CA were determined by applying a "vascular waterfall" model to the arterial bed. During HH, Pc increased while Ra and Ca decreased. During COH, Pc and Ra decreased, but Ca did not change. The Pc results indicate that during HH, but not COH, a large portion of the systemic arterial bed experienced a marked increase in vasomotor tone, a qualitative difference that would have been missed if Pc had not been measured. The relationship among Pc, Ra, and Ca during hypoxia suggest these indices may have been determined largely by different portions of the arterial bed in which tone changed independently.

THE SOLAR NEIGHBORHOOD. XXV. DISCOVERY OF NEW PROPER MOTION STARS WITH 0.''40 yr{sup -1} > {mu} {>=} 0.''18 yr{sup -1} BETWEEN DECLINATIONS -47{sup 0} AND 00{sup 0}

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boyd, Mark R.; Winters, Jennifer G.; Henry, Todd J.

2011-07-15

We present 2817 new southern proper motion systems with 0.''40 yr{sup -1} > {mu} {>=} 0.''18 yr{sup -1} and declination between -47{sup 0} and 00{sup 0}. This is a continuation of the SuperCOSMOS-RECONS (SCR) proper motion searches of the southern sky. We use the same photometric relations as previous searches to provide distance estimates based on the assumption that the objects are single main-sequence stars. We find 79 new red dwarf systems predicted to be within 25 pc, including a few new components of previously known systems. Two systems-SCR 1731-2452 at 9.5 pc and SCR 1746-3214 at 9.9 pc-are anticipatedmore » to be within 10 pc. We also find 23 new white dwarf (WD) candidates with distance estimates of 15-66 pc, as well as 360 new red subdwarf candidates. With this search, we complete the SCR sweep of the southern sky for stars with {mu} {>=} 0.''18 yr{sup -1} and R{sub 59F} {<=} 16.5, resulting in a total of 5042 objects in 4724 previously unreported proper motion systems. Here we provide selected comprehensive lists from our SCR proper motion search to date, including 152 red dwarf systems estimated to be within 25 pc (9 within 10 pc), 46 WDs (10 within 25 pc), and 598 subdwarf candidates. The results of this search suggest that there are more nearby systems to be found at fainter magnitudes and lower proper motion limits than those probed so far.« less

A low-cost PC-based telemetry data-reduction system

NASA Astrophysics Data System (ADS)

Simms, D. A.; Butterfield, C. P.

1990-04-01

The Solar Energy Research Institute's (SERI) Wind Research Branch is using Pulse Code Modulation (PCM) telemetry data-acquisition systems to study horizontal-axis wind turbines. PCM telemetry systems are used in test installations that require accurate multiple-channel measurements taken from a variety of different locations. SERI has found them ideal for use in tests requiring concurrent acquisition of data-reduction system to facilitate quick, in-the-field multiple-channel data analysis. Called the PC-PCM System, it consists of two basic components. First, AT-compatible hardware boards are used for decoding and combining PCM data streams. Up to four hardware boards can be installed in a single PC, which provides the capability to combine data from four PCM streams directly to PC disk or memory. Each stream can have up to 62 data channels. Second, a software package written for the DOS operating system was developed to simplify data-acquisition control and management. The software provides a quick, easy-to-use interface between the PC and PCM data streams. Called the Quick-Look Data Management Program, it is a comprehensive menu-driven package used to organize, acquire, process, and display information from incoming PCM data streams. This paper describes both hardware and software aspects of the SERI PC-PCM system, concentrating on features that make it useful in an experiment test environment to quickly examine and verify incoming data. Also discussed are problems and techniques associated with PC-based telemetry data acquisition, processing, and real-time display.

Molecular layers of ZnPc and FePc on Au(111) surface: Charge transfer and chemical interaction

NASA Astrophysics Data System (ADS)

Ahmadi, Sareh; Shariati, M. Nina; Yu, Shun; Göthelid, Mats

2012-08-01

We have studied zinc phthalocyanine (ZnPc) and iron phthalocyanine (FePc) thick films and monolayers on Au(111) using photoelectron spectroscopy and x-ray absorption spectroscopy. Both molecules are adsorbed flat on the surface at monolayer. ZnPc keeps this orientation in all investigated coverages, whereas FePc molecules stand up in the thick film. The stronger inter-molecular interaction of FePc molecules leads to change of orientation, as well as higher conductivity in FePc layer in comparison with ZnPc, which is reflected in thickness-dependent differences in core-level shifts. Work function changes indicate that both molecules donate charge to Au; through the π-system. However, the Fe3d derived lowest unoccupied molecular orbital receives charge from the substrate when forming an interface state at the Fermi level. Thus, the central atom plays an important role in mediating the charge, but the charge transfer as a whole is a balance between the two different charge transfer channels; π-system and the central atom.

Graphene-enhanced intermolecular interaction at interface between copper- and cobalt-phthalocyanines

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dou, Wei-Dong; Center of Super-Diamond and Advanced Films; Huang, Shu-Ping

2015-10-07

Interfacial electronic structures of copper-phthalocyanine (CuPc), cobalt-phthalocyanine (CoPc), and graphene were investigated experimentally by using photoelectron spectroscopy. While the CuPc/graphene interface shows flat band structure and negligible interfacial dipole indicating quite weak molecule-substrate interaction, the CuPc/CoPc/graphene interface shows a large interfacial dipole and obvious energy level bending. Controlled experiments ruled out possible influences from the change in film structure of CuPc and pure π–π interaction between CoPc and CuPc. Analysis based on X-ray photoelectron spectroscopy and density functional theory reveals that the decrease in the work function for the CuPc/CoPc/graphene system is induced by the intermolecular interaction between CuPc andmore » CoPc which is enhanced owning to the peculiar electronic properties at the CoPc-graphene interface.« less

75 FR 53000 - Privacy Act of 1974; Report of an Altered System of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-30

..., and PC-18-- Former Peace Corps Volunteers Database. The first revision adds a specific routine use to both PC-17 and PC-18. This specific routine use indicates that the Peace Corps may share Peace Corps... information. The second revision adds another specific routine use to both PC-17 and PC- 18 indicating that...

Enhanced photothermal lens using a photonic crystal surface

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhao, Yunfei; Liu, Longju; Zhao, Xiangwei

2016-08-15

A photonic crystal (PC)-enhanced photothermal lens (PTL) is demonstrated for the detection of optically thin light absorption materials. The PC-enhanced PTL system is based on a pump-probe scheme consisting of a PC surface, pump laser beam, and probe laser beam. Heated by the pump beam, light absorption materials on the PC surface generate the PTL and cause a substantial change to the guided-mode resonance supported by the PC structure. The change of the PC resonance is detected using the probe laser beam by measuring its reflectivity from the PC surface. When applied to analyze dye molecules deposited on the PCmore » substrate, the developed system is capable of enhancing the PTL signal by 10-fold and reducing the lowest distinguishable concentration by 8-fold, in comparison to measuring without utilizing the PC resonance. The PC-enhanced PTL was also used to detect gold nanoparticles on the PC surface and exhibited a 20-fold improvement of the lowest distinguishable concentration. The PC-enhanced PTL technology offers a potential tool to obtain the absorption signatures of thin films in a broad spectral range with high sensitivity and inexpensive instrumentation. As a result, this technology will enable a broad range of applications of photothermal spectroscopy in chemical analysis and biomolecule sensing.« less

Analysis of environmental variation in a Great Plains reservoir using principal components analysis and geographic information systems

USGS Publications Warehouse

Long, J.M.; Fisher, W.L.

2006-01-01

We present a method for spatial interpretation of environmental variation in a reservoir that integrates principal components analysis (PCA) of environmental data with geographic information systems (GIS). To illustrate our method, we used data from a Great Plains reservoir (Skiatook Lake, Oklahoma) with longitudinal variation in physicochemical conditions. We measured 18 physicochemical features, mapped them using GIS, and then calculated and interpreted four principal components. Principal component 1 (PC1) was readily interpreted as longitudinal variation in water chemistry, but the other principal components (PC2-4) were difficult to interpret. Site scores for PC1-4 were calculated in GIS by summing weighted overlays of the 18 measured environmental variables, with the factor loadings from the PCA as the weights. PC1-4 were then ordered into a landscape hierarchy, an emergent property of this technique, which enabled their interpretation. PC1 was interpreted as a reservoir scale change in water chemistry, PC2 was a microhabitat variable of rip-rap substrate, PC3 identified coves/embayments and PC4 consisted of shoreline microhabitats related to slope. The use of GIS improved our ability to interpret the more obscure principal components (PC2-4), which made the spatial variability of the reservoir environment more apparent. This method is applicable to a variety of aquatic systems, can be accomplished using commercially available software programs, and allows for improved interpretation of the geographic environmental variability of a system compared to using typical PCA plots. ?? Copyright by the North American Lake Management Society 2006.

Evaluation of aluminum phthalocyanine chloride and DNA interactions for the design of an advanced drug delivery system in photodynamic therapy.

PubMed

Jayme, Cristiano Ceron; Calori, Italo Rodrigo; Cunha, Elise Marques Freire; Tedesco, Antonio Claudio

2018-08-05

The aim of this study was to evaluate the interaction of aluminum phthalocyanine chloride (AlClPc) with double-stranded DNA. Absorption and fluorescence spectra, resonance light scattering, and circular dichroism were evaluated in water and water/ethanol mixtures with different concentrations of DNA or AlClPc. AlClPc showed a high ability to bind to DNA in both water and 4/6 water/ethanol mixture (v/v), with a majority of monomeric and aggregated initial forms of AlClPc, respectively. In this interaction, AlClPc bound preferentially to the grooves of DNA. The monomeric/aggregate state of AlClPc in DNA was dependent on the AlClPc/DNA ratio. At low concentrations of AlClPc, the interaction of AlClPc with few DNA sites caused a curvature in the DNA structure that provided a favorable environment for the intercalation of AlClPc aggregates. Increase in AlClPc concentration induced interactions with a high number of binding sites on DNA, which prevented bending and therefore aggregation of AlClPc molecules throughout the double-stranded DNA. These results are relevant to the understanding of the behavior and interaction of AlClPc with double-stranded DNA in the design of novel drug delivery systems for clinical application in photodynamic therapy as a new approach to treat skin or oral cancer, scars, or wound healing. Copyright © 2018 Elsevier B.V. All rights reserved.

Fossil plant startup advisor: Volume 2, User's manual for a startup model: Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dixon, R.R.; Kraje, N.B.

1988-12-01

These instructions describe how to use the dynamic model of a fossil power plant on the diskette at the back of this document. The model runs on an IBM PC, XT or AT. It was developed as part of an EPRI study on fossil startup problems; RP1184-4. The purpose of the model was to provide a tool to demonstrate problems encountered during startups and potential solutions proposed by various industry experts. Consequently, the accuracy and fidelity of the model was not critical, but rather the ability to operate in various startup configurations was more important. An MMS model of themore » cycling unit at COLLINS STATION of Commonwealth Edison served as the basis for the model. Some simplifications were introduced to allow it to run on the PC faster than realtime. The most significant of these is the steam property curves. The saturation properties used are reasonable over the entire operating range, but the superheated steam properties are highly inaccurate at low pressures and low temperatures. This limitation does not, however, diminish the value of the model in demonstrating startup problems or in evaluating the relative merits of one solution over another. On the positive side, the model has both a superheater bypass system and a turbine bypass system. Either bypass can be used separately, or they can be used together (something that appears desirable but no utility has been wealthy enough to try yet). In addition, it provides an excellent tool for understanding the operation of a drum type boiler and both superheater and turbine bypass systems. 14 figs.« less

Developing a primary care patient measure of safety (PC PMOS): a modified Delphi process and face validity testing.

PubMed

Hernan, Andrea L; Giles, Sally J; O'Hara, Jane K; Fuller, Jeffrey; Johnson, Julie K; Dunbar, James A

2016-04-01

Patients are a valuable source of information about ways to prevent harm in primary care and are in a unique position to provide feedback about the factors that contribute to safety incidents. Unlike in the hospital setting, there are currently no tools that allow the systematic capture of this information from patients. The aim of this study was to develop a quantitative primary care patient measure of safety (PC PMOS). A two-stage approach was undertaken to develop questionnaire domains and items. Stage 1 involved a modified Delphi process. An expert panel reached consensus on domains and items based on three sources of information (validated hospital PMOS, previous research conducted by our study team and literature on threats to patient safety). Stage 2 involved testing the face validity of the questionnaire developed during stage 1 with patients and primary care staff using the 'think aloud' method. Following this process, the questionnaire was revised accordingly. The PC PMOS was received positively by both patients and staff during face validity testing. Barriers to completion included the length, relevance and clarity of questions. The final PC PMOS consisted of 50 items across 15 domains. The contributory factors to safety incidents centred on communication, access to care, patient-related factors, organisation and care planning, task performance and information flow. This is the first tool specifically designed for primary care settings, which allows patients to provide feedback about factors contributing to potential safety incidents. The PC PMOS provides a way for primary care organisations to learn about safety from the patient perspective and make service improvements with the aim of reducing harm in this setting. Future research will explore the reliability and construct validity of the PC PMOS. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Systems biology approaches to pancreatic cancer detection, prevention and treatment.

PubMed

Alian, Osama M; Philip, Philip A; Sarkar, Fazlul H; Azmi, Asfar S

2014-01-01

Pancreatic cancer [PC] is a complex disease harboring multiple genetic alterations. It is now well known that deregulation in the expression and function of oncogenes and tumor suppressor genes contributes to the development and progression of PC. The last 40 years have not seen any major improvements in the dismal overall cure rate for PC where drug resistance is an emerging and recurring obstacle for successful treatment of PC. Additionally, the lack of molecular biomarkers for patient selection limits drug availabilities for tailored therapy for patients diagnosed with PC. The very high failure rate of new drugs in Phase III clinical trials in PC calls for a more robust pre-clinical and clinical testing of new compounds. In order to rationally choose combinations of targeted agents that may improve therapeutic outcome by overcoming drug resistance, one needs to apply newer research tools such as systems and network biology. These newer tools are expected to assist in the design of effective drug combinations for the treatment of PC and are expected to become an important part in any future clinical trials. In this review we will provide background information on the current state of PC research, the reasons for drug failure and how to overcome these issues using systems sciences. We conclude this review with an example on how systems and network methodologies can help in the design efficacious drug combinations for this deadly and by far incurable disease.

How to achieve optimal organization of primary care service delivery at system level: lessons from Europe.

PubMed

Pelone, Ferruccio; Kringos, Dionne S; Spreeuwenberg, Peter; De Belvis, Antonio G; Groenewegen, Peter P

2013-09-01

To measure the relative efficiency of primary care (PC) in turning their structures into services delivery and turning their services delivery into quality outcomes. Cross-sectional study based on the dataset of the Primary Healthcare Activity Monitor for Europe project. Two Data Envelopment models were run to compare the relative technical efficiency. A sensitivity analysis of the resulting efficiency scores was performed. PC systems in 22 European countries in 2009/2010. Model 1 included data on PC governance, workforce development and economic conditions as inputs and access, coordination, continuity and comprehensiveness of care as outputs. Model 2 included the previous process dimensions as inputs and quality indicators as outputs. There is relatively reasonable efficiency in all countries at delivering as many as possible PC processes at a given level of PC structure. It is particularly important to invest in economic conditions to achieve an efficient structure-process balance. Only five countries have fully efficient PC systems in turning their services delivery into high quality outcomes, using a similar combination of access, continuity and comprehensiveness, although they differ on the adoption of coordination of services. There is a large variation in efficiency levels obtained by countries with inefficient PC in turning their services delivery into quality outcomes. Maximizing the individual functions of PC without taking into account the coherence within the health-care system is not sufficient from a policymaker's point of view when aiming to achieve efficiency.

A Delphi study assessing the utility of quality improvement tools and resources in Australian primary care.

PubMed

Upham, Susan J; Janamian, Tina; Crossland, Lisa; Jackson, Claire L

2016-04-18

To determine the relevance and utility of online tools and resources to support organisational performance development in primary care and to complement the Primary Care Practice Improvement Tool (PC-PIT). A purposively recruited Expert Advisory Panel of 12 end users used a modified Delphi technique to evaluate 53 tools and resources identified through a previously conducted systematic review. The panel comprised six practice managers and six general practitioners who had participated in the PC-PIT pilot study in 2013-2014. Tools and resources were reviewed in three rounds using a standard pre-tested assessment form. Recommendations, scores and reasons for recommending or rejecting each tool or resource were analysed to determine the final suite of tools and resources. The evaluation was conducted from November 2014 to August 2015. Recommended tools and resources scored highly (mean score, 16/20) in Rounds 1 and 2 of review (n = 25). These tools and resources were perceived to be easily used, useful to the practice and supportive of the PC-PIT. Rejected resources scored considerably lower (mean score, 5/20) and were noted to have limitations such as having no value to the practice and poor utility (n = 6). A final review (Round 3) of 28 resources resulted in a suite of 21 to support the elements of the PC-PIT. This suite of tools and resources offers one approach to supporting the quality improvement initiatives currently in development in primary care reform.

Fast data transmission from serial data acquisition for the GEM detector system

NASA Astrophysics Data System (ADS)

Kolasinski, Piotr; Pozniak, Krzysztof T.; Czarski, Tomasz; Byszuk, Adrian; Chernyshova, Maryna; Kasprowicz, Grzegorz; Krawczyk, Rafal D.; Wojenski, Andrzej; Zabolotny, Wojciech

2015-09-01

This article proposes new method of storing data and transferring it to PC in the X-ray GEM detector system. The whole process is performed by FPGA chips (Spartan-6 series from Xilinx). Comparing to previous methods, new approach allows to store much more data in the system. New, improved implementation of the communication algorithm significantly increases transfer rate between system and PC. In PC data is merged and processed by MATLAB. The structure of firmware implemented in the FPGAs is described.

An overview of the evaluation plan for PC/MISI: PC-based Multiple Information System Interface

NASA Technical Reports Server (NTRS)

Dominick, Wayne D. (Editor); Lim, Bee Lee; Hall, Philip P.

1985-01-01

An initial evaluation plan for the personal computer multiple information system interface (PC/MISI) project is discussed. The document is intend to be used as a blueprint for the evaluation of this system. Each objective of the design project is discussed along with the evaluation parameters and methodology to be used in the evaluation of the implementation's achievement of those objectives. The potential of the system for research activities related to more general aspects of information retrieval is also discussed.

Maximally asymmetric transbilayer distribution of anionic lipids alters the structure and interaction with lipids of an amyloidogenic protein dimer bound to the membrane surface

PubMed Central

Cheng, Sara Y.; Chou, George; Buie, Creighton; Vaughn, Mark W.; Compton, Campbell; Cheng, Kwan H.

2016-01-01

We used molecular dynamics simulations to explore the effects of asymmetric transbilayer distribution of anionic phosphatidylserine (PS) lipids on the structure of a protein on the membrane surface and subsequent protein–lipid interactions. Our simulation systems consisted of an amyloidogenic, beta-sheet rich dimeric protein (D42) absorbed to the phosphatidylcholine (PC) leaflet, or protein-contact PC leaflet, of two membrane systems: a single-component PC bilayer and double PC/PS bilayers. The latter comprised of a stable but asymmetric transbilayer distribution of PS in the presence of counterions, with a 1-component PC leaflet coupled to a 1-component PS leaflet in each bilayer. The maximally asymmetric PC/PS bilayer had a non-zero transmembrane potential (TMP) difference and higher lipid order packing, whereas the symmetric PC bilayer had a zero TMP difference and lower lipid order packing under physiologically relevant conditions. Analysis of the adsorbed protein structures revealed weaker protein binding, more folding in the N-terminal domain, more aggregation of the N- and C-terminal domains and larger tilt angle of D42 on the PC leaflet surface of the PC/PS bilayer versus the PC bilayer. Also, analysis of protein-induced membrane structural disruption revealed more localized bilayer thinning in the PC/PS versus PC bilayer. Although the electric field profile in the non-protein-contact PS leaflet of the PC/PS bilayer differed significantly from that in the non-protein-contact PC leaflet of the PC bilayer, no significant difference in the electric field profile in the protein-contact PC leaflet of either bilayer was evident. We speculate that lipid packing has a larger effect on the surface adsorbed protein structure than the electric field for a maximally asymmetric PC/PS bilayer. Our results support the mechanism that the higher lipid packing in a lipid leaflet promotes stronger protein–protein but weaker protein–lipid interactions for a dimeric protein on membrane surfaces. PMID:26827904

Electronic absorption band broadening and surface roughening of phthalocyanine double layers by saturated solvent vapor treatment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kim, Jinhyun; Yim, Sanggyu, E-mail: sgyim@kookmin.ac.kr

2012-10-15

Variations in the electronic absorption (EA) and surface morphology of three types of phthalocyanine (Pc) thin film systems, i.e. copper phthalocyanine (CuPc) single layer, zinc phthalocyanine (ZnPc) single layer, and ZnPc on CuPc (CuPc/ZnPc) double layer film, treated with saturated acetone vapor were investigated. For the treated CuPc single layer film, the surface roughness slightly increased and bundles of nanorods were formed, while the EA varied little. In contrast, for the ZnPc single layer film, the relatively high solubility of ZnPc led to a considerable shift in the absorption bands as well as a large increase in the surface roughnessmore » and formation of long and wide nano-beams, indicating a part of the ZnPc molecules dissolved in acetone, which altered their molecular stacking. For the CuPc/ZnPc film, the saturated acetone vapor treatment resulted in morphological changes in mainly the upper ZnPc layer due to the significantly low solubility of the underlying CuPc layer. The treatment also broadened the EA band, which involved a combination of unchanged CuPc and changed ZnPc absorption.« less

A brief history and technical review of the expert system research

NASA Astrophysics Data System (ADS)

Tan, Haocheng

2017-09-01

The expert system is a computer system that emulates the decision-making ability of a human expert, which aims to solve complex problems by reasoning knowledge. It is an important branch of artificial intelligence. In this paper, firstly, we briefly introduce the development and basic structure of the expert system. Then, from the perspective of the enabling technology, we classify the current expert systems and elaborate four expert systems: The Rule-Based Expert System, the Framework-Based Expert System, the Fuzzy Logic-Based Expert System and the Expert System Based on Neural Network.

A feasibility study for compressed sensing combined phase contrast MR angiography reconstruction

NASA Astrophysics Data System (ADS)

Lee, Dong-Hoon; Hong, Cheol-Pyo; Lee, Man-Woo; Han, Bong-Soo

2012-02-01

Phase contrast magnetic resonance angiography (PC MRA) is a technique for flow velocity measurement and vessels visualization, simultaneously. The PC MRA takes long scan time because each flow encoding gradients which are composed bipolar gradient type need to reconstruct the angiography image. Moreover, it takes more image acquisition time when we use the PC MRA at the low-tesla MRI system. In this study, we studied and evaluation of feasibility for CS MRI reconstruction combined PC MRA which data acquired by low-tesla MRI system. We used non-linear reconstruction algorithm which named Bregman iteration for CS image reconstruction and validate the usefulness of CS combined PC MRA reconstruction technique. The results of CS reconstructed PC MRA images provide similar level of image quality between fully sampled reconstruction data and sparse sampled reconstruction using CS technique. Although our results used half of sampling ratio and do not used specification hardware device or performance which are improving the temporal resolution of MR image acquisition such as parallel imaging reconstruction using phased array coil or non-cartesian trajectory, we think that CS combined PC MRA technique will be helpful to increase the temporal resolution and at low-tesla MRI system.

Expert Systems: An Overview for Teacher-Librarians.

ERIC Educational Resources Information Center

Orwig, Gary; Barron, Ann

1992-01-01

Provides an overview of expert systems for teacher librarians. Highlights include artificial intelligence and expert systems; the development of the MYCIN medical expert system; rule-based expert systems; the use of expert system shells to develop a specific system; and how to select an appropriate application for an expert system. (11 references)…

Method of mounting a PC board to a hybrid

NASA Technical Reports Server (NTRS)

O'Coin, James R. (Inventor)

1999-01-01

A system for mounting a hybrid electronic component to a PC board is disclosed. The system includes a set of brackets for mutually engaging a first surface of the PC board and a cover surface of the hybrid electronic component, wherein the cover surface has an arcuate shape when in a vacuum environment. The brackets are designed with legs having lengths and thicknesses for providing clearance between the cover surface of the hybrid and the first surface of the PC board for use when the hybrid electronic component is in a vacuum environment.

Impact of Radiation Hardness and Operating Temperatures of Silicon Carbide Electronics on Space Power System Mass

NASA Technical Reports Server (NTRS)

Juhasz, Albert J.; Tew, Roy C.; Schwarze, Gene E.

1998-01-01

The effect of silicon carbide (SiC) electronics operating temperatures on Power Management and Distribution (PMAD), or Power Conditioning (PC), subsystem radiator size and mass requirements was evaluated for three power output levels (100 kW(e) , 1 MW(e), and 10 MW(e)) for near term technology ( i.e. 1500 K turbine inlet temperature) Closed Cycle Gas Turbine (CCGT) power systems with a High Temperature Gas Reactor (HTGR) heat source. The study was conducted for assumed PC radiator temperatures ranging from 370 to 845 K and for three scenarios of electrical energy to heat conversion levels which needed to be rejected to space by means of the PC radiator. In addition, during part of the study the radiation hardness of the PC electronics was varied at a fixed separation distance to estimate its effect on the mass of the instrument rated reactor shadow shield. With both the PC radiator and the conical shadow shield representing major components of the overall power system the influence of the above on total power system mass was also determined. As expected, results show that the greatest actual mass savings achieved by the use of SiC electronics occur with high capacity power systems. Moreover, raising the PC radiator temperature above 600 K yields only small additional system mass savings. The effect of increased radiation hardness on total system mass is to reduce system mass by virtue of lowering the shield mass.

Strategies for Promoting High-Quality Care and Personal Resilience in Palliative Care.

PubMed

Heinze, Katherine E; Holtz, Heidi K; Rushton, Cynda H

2017-06-01

Palliative care (PC) clinicians are faced with ever-expanding pressures, which can make it difficult to fulfill their duties to self and others and lead to moral distress. Understanding the pressures that PC clinicians face and the resources that could be employed to ease their moral distress is crucial to maintaining a healthy PC workforce and to providing necessary PC services to patients. In this paper, we discuss recommendations related to two promising pathways for supporting PC clinicians in providing high-quality PC: (1) improving systemic PC delivery and (2) strategies to promote ethical practice environments and individual resilience. Enacting these recommendations holds promise for sustaining higher-quality and accessible PC and a more engaged PC workforce. © 2017 American Medical Association. All Rights Reserved.

Do We Reap What We Sow? Exploring the Association between the Strength of European Primary Healthcare Systems and Inequity in Unmet Need

PubMed Central

Hanssens, Lise; Vyncke, Veerle; De Maeseneer, Jan; Willems, Sara

2017-01-01

Access to healthcare is inequitably distributed across different socioeconomic groups. Several vulnerable groups experience barriers in accessing healthcare, compared to their more wealthier counterparts. In response to this, many countries use resources to strengthen their primary care (PC) system, because in many European countries PC is the first entry-point to the healthcare system and plays a central role in the coordination of patients through the healthcare system. However it is unclear whether this strengthening of PC leads to less inequity in access to the whole healthcare system. This study investigates the association between strength indicators of PC and inequity in unmet need by merging data from the European Union Statistics on Income and Living Conditions database (2013) and the Primary Healthcare Activity Monitor for Europe (2010). The analyses reveal a significant association between the Gini coefficient for income inequality and inequity in unmet need. When the Gini coefficient of a country is one SD higher, the social inequity in unmet need in that particular country will be 4.960 higher. Furthermore, the accessibility and the workforce development of a country’s PC system is inverse associated with the social inequity of unmet need. More specifically, when the access- and workforce development indicator of a country PC system are one standard deviation higher, the inequity in unmet healthcare needs are respectively 2.200 and 4.951 lower. Therefore, policymakers should focus on reducing income inequality to tackle inequity in access, and strengthen PC (by increasing accessibility and better-developing its workforce) as this can influence inequity in unmet need. PMID:28046051

Is directly observed tuberculosis treatment strategy patient-centered? A mixed method study in Addis Ababa, Ethiopia.

PubMed

Getahun, Belete; Nkosi, Zethu Zerish

2017-01-01

The directly observed treatment, short course (DOTS) strategy has been considered as an efficacious approach for better tuberculosis (TB) treatment adherence and outcome. However, its level of patient centerdness has not been studied and documented well. Hence, the study aimed to determine the level of patient centeredness' of the DOTS. The study used explanatory sequential mixed method design in Addis Ababa, Ethiopia. The study employed an interviewer-administered questionnaire with 601 patients with TB, focus group discussions with 23 TB experts, and telephonic-interview with 25 persons lost to follow-up from TB treatment. Descriptive and multivariable analyses carried out for the quantitative data while thematic analysis was used for the qualitative data. Forty percent of patients with TB had not received patient-centered TB care (PC-TB care) with DOTS. Male gender (AOR = 0.45, 95% CI 0.3, 0.7), good communication (AOR = 3.2, 95%CI 1.6, 6.1), and health care providers as a treatment supporter (AOR = 3.4, 95% CI 2.1, 5.48) had significant associations with PC-TB care. All persons lost to follow-up and TB experts perceived that DOTS is merely patient-centered. The identified categories were patient preferences, treatment supporter choice, integration of DOTS with nutritional support, mental health, and transport services, provider's commitment and communication skills. DOTS is limited to provide patient-centered TB care. Hence, DOTS needs a model that enhances effectiveness towards patient centeredness of TB care.

Digital video timing analyzer for the evaluation of PC-based real-time simulation systems

NASA Astrophysics Data System (ADS)

Jones, Shawn R.; Crosby, Jay L.; Terry, John E., Jr.

2009-05-01

Due to the rapid acceleration in technology and the drop in costs, the use of commercial off-the-shelf (COTS) PC-based hardware and software components for digital and hardware-in-the-loop (HWIL) simulations has increased. However, the increase in PC-based components creates new challenges for HWIL test facilities such as cost-effective hardware and software selection, system configuration and integration, performance testing, and simulation verification/validation. This paper will discuss how the Digital Video Timing Analyzer (DiViTA) installed in the Aviation and Missile Research, Development and Engineering Center (AMRDEC) provides quantitative characterization data for PC-based real-time scene generation systems. An overview of the DiViTA is provided followed by details on measurement techniques, applications, and real-world examples of system benefits.

Negative differential resistance in nickel octabutoxy phthalocyanine and nickel octabutoxy phthalocyanine/graphene oxide ultrathin films

NASA Astrophysics Data System (ADS)

Sarkar, Arup; Suresh, K. A.

2018-04-01

We find negative differential resistance (NDR) at room temperature in ultrathin films of nickel (II) 1,4,8,11,15,18,22,25-octabutoxy-29H,31H-phthalocyanine [NiPc(OBu)8] deposited on highly ordered pyrolytic graphite (HOPG) substrate [NiPc(OBu)8/HOPG] and NiPc(OBu)8 on graphene oxide (GO) deposited on HOPG [NiPc(OBu)8/GO/HOPG]. For the NiPc(OBu)8/HOPG system, NiPc(OBu)8 was transferred four times onto HOPG by the Langmuir-Blodgett (LB) technique. We have prepared a stable Langmuir monolayer of amphiphilic GO at the air-water interface and transferred it onto HOPG by the LB technique. Further, the monolayer of NiPc(OBu)8 was transferred four times for good coverage on GO to obtain the NiPc(OBu)8/GO/HOPG system. The current-voltage characteristics were carried out using a current sensing atomic force microscope (CSAFM) with a platinum (Pt) tip that forms Pt/NiPc(OBu)8/HOPG and Pt/NiPc(OBu)8/GO/HOPG junctions. The CSAFM, UV-visible spectroscopy, and cyclic voltammetry studies show that the NDR effect occurs due to molecular resonant tunneling. In the Pt/NiPc(OBu)8/GO/HOPG junction, we find that due to the presence of GO, the features of NDR become more prominent. Also, GO causes a shift in NDR voltage towards a lower value in the negative bias direction. We attribute this behavior to the role of GO in injecting holes into the NiPc(OBu)8 film.

The Solar Neighborhood. XXVII. Discovery of New Proper Motion Stars with μ >= 0farcs18 yr-1 in the Southern Sky with 16.5 < R 59F <= 18.0

NASA Astrophysics Data System (ADS)

Boyd, Mark R.; Henry, Todd J.; Jao, Wei-Chun; Subasavage, John P.; Hambly, Nigel C.

2011-09-01

Here we present 1584 new southern proper motion systems with μ >= 0farcs18 yr-1 and 16.5 > R 59F >= 18.0. This search complements the six previous SuperCOSMOS-RECONS (SCR) proper motion searches of the southern sky for stars within the same proper motion range, but with R 59F <= 16.5. As in previous papers, we present distance estimates for these systems and find that three systems are estimated to be within 25 pc, including one, SCR 1546-5534, possibly within the RECONS 10 pc horizon at 6.7 pc, making it the second nearest discovery of the searches. We find 97 white dwarf candidates with distance estimates between 10 and 120 pc, as well as 557 cool subdwarf candidates. The subdwarfs found in this paper make up nearly half of the subdwarf systems reported from our SCR searches and are significantly redder than those discovered thus far. The SCR searches have now found 155 red dwarfs estimated to be within 25 pc, including 10 within 10 pc. In addition, 143 white dwarf candidates and 1155 cool subdwarf candidates have been discovered. The 1584 systems reported here augment the sample of 4724 systems previously discovered in our SCR searches and imply that additional systems fainter than R 59F = 18.0 are yet to be discovered.

Distributed Processing with a Mainframe-Based Hospital Information System: A Generalized Solution

PubMed Central

Kirby, J. David; Pickett, Michael P.; Boyarsky, M. William; Stead, William W.

1987-01-01

Over the last two years the Medical Center Information Systems Department at Duke University Medical Center has been developing a systematic approach to distributing the processing and data involved in computerized applications at DUMC. The resulting system has been named MAPS- the Micro-ADS Processing System. A key characteristic of MAPS is that it makes it easy to execute any existing mainframe ADS application with a request from a PC. This extends the functionality of the mainframe application set to the PC without compromising the maintainability of the PC or mainframe systems.

Geophysical phenomena classification by artificial neural networks

NASA Technical Reports Server (NTRS)

Gough, M. P.; Bruckner, J. R.

1995-01-01

Space science information systems involve accessing vast data bases. There is a need for an automatic process by which properties of the whole data set can be assimilated and presented to the user. Where data are in the form of spectrograms, phenomena can be detected by pattern recognition techniques. Presented are the first results obtained by applying unsupervised Artificial Neural Networks (ANN's) to the classification of magnetospheric wave spectra. The networks used here were a simple unsupervised Hamming network run on a PC and a more sophisticated CALM network run on a Sparc workstation. The ANN's were compared in their geophysical data recognition performance. CALM networks offer such qualities as fast learning, superiority in generalizing, the ability to continuously adapt to changes in the pattern set, and the possibility to modularize the network to allow the inter-relation between phenomena and data sets. This work is the first step toward an information system interface being developed at Sussex, the Whole Information System Expert (WISE). Phenomena in the data are automatically identified and provided to the user in the form of a data occurrence morphology, the Whole Information System Data Occurrence Morphology (WISDOM), along with relationships to other parameters and phenomena.

A telepresence robot system realized by embedded object concept

NASA Astrophysics Data System (ADS)

Vallius, Tero; Röning, Juha

2006-10-01

This paper presents the Embedded Object Concept (EOC) and a telepresence robot system which is a test case for the EOC. The EOC utilizes common object-oriented methods used in software by applying them to combined Lego-like software-hardware entities. These entities represent objects in object-oriented design methods, and they are the building blocks of embedded systems. The goal of the EOC is to make the designing embedded systems faster and easier. This concept enables people without comprehensive knowledge in electronics design to create new embedded systems, and for experts it shortens the design time of new embedded systems. We present the current status of a telepresence robot created with second-generation Atomi-objects, which is the name for our implementation of the embedded objects. The telepresence robot is a relatively complex test case for the EOC. The robot has been constructed using incremental device development, which is made possible by the architecture of the EOC. The robot contains video and audio exchange capability and a controlling system for driving with two wheels. The robot is built in two versions, the first consisting of a PC device and Atomi-objects, and the second consisting of only Atomi-objects. The robot is currently incomplete, but most of it has been successfully tested.

Antibody therapeutics for treating prostate cancer: where are we now and what comes next?

PubMed

Vlachostergios, Panagiotis J; Galletti, Giuseppe; Palmer, Jessica; Lam, Linda; Karir, Beerinder S; Tagawa, Scott T

2017-02-01

Progress in the understanding of molecular events of carcinogenesis and cancer evolution as well as the identification of tumor antigens has led to the development of different targeted therapeutic approaches, including the use of monoclonal antibodies (mAbs). Prostate cancer (PC) is highly amenable to mAb targeting given the existence of prostate-specific targets and the natural history and localization of metastatic disease. Areas covered: Several aspects of the PC phenotype, including growth factors, angiogenesis mediators, bone microenvironment signals, and immune evasion pathways, have become areas of ongoing investigation in terms of mAb targeting. These are reviewed. The greatest success so far has been the development of mAbs against prostate-specific tumor antigen (PSMA), which opened an opportunity to improve diagnostic accuracy and simultaneously target metastatic disease. Expert opinion: As mAb use in PC continues to evolve, more accurate imaging of the extent of disease and more effective mAb therapies (naked or conjugated with drugs, toxins or radioactive molecules) are emerging. In addition, the combination of mAbs with other treatment modalities is expected to further improve responses and overall survival. Identification of validated biomarkers is necessary for better recognition of patient subgroups who will derive the greatest benefit from mAb therapy.

Development of patient-controlled respiratory gating system based on visual guidance for magnetic-resonance image-guided radiation therapy.

PubMed

Kim, Jung-In; Lee, Hanyoung; Wu, Hong-Gyun; Chie, Eui Kyu; Kang, Hyun-Cheol; Park, Jong Min

2017-09-01

The aim of this study is to develop a visual guidance patient-controlled (VG-PC) respiratory gating system for respiratory-gated magnetic-resonance image-guided radiation therapy (MR-IGRT) and to evaluate the performance of the developed system. The near-real-time cine planar MR image of a patient acquired during treatment was transmitted to a beam projector in the treatment room through an optical fiber cable. The beam projector projected the cine MR images inside the bore of the ViewRay system in order to be visible to a patient during treatment. With this visual information, patients voluntarily controlled their respiration to put the target volume into the gating boundary (gating window). The effect of the presence of the beam projector in the treatment room on the image quality of the MRI was investigated by evaluating the signal-to-noise ratio (SNR), uniformity, low-contrast detectability, high-contrast spatial resolution, and spatial integrity with the VG-PC gating system. To evaluate the performance of the developed system, we applied the VG-PC gating system to a total of seven patients; six patients received stereotactic ablative radiotherapy (SABR) and one patient received conventional fractionated radiation therapy. The projected cine MR images were visible even when the room light was on. No image data loss or additional time delay during delivery of image data were observed. Every indicator representing MRI quality, including SNR, uniformity, low-contrast detectability, high-contrast spatial resolution, and spatial integrity exhibited values higher than the tolerance levels of the manufacturer with the VG-PC gating system; therefore, the presence of the VG-PC gating system in the treatment room did not degrade the MR image quality. The average beam-off times due to respiratory gating with and without the VG-PC gating system were 830.3 ± 278.2 s and 1264.2 ± 302.1 s respectively (P = 0.005). Consequently, the total treatment times excluding the time for patient setup with and without the VG-PC gating system were 1453.3 ± 297.3 s and 1887.2 ± 469.6 s, respectively, on average (P = 0.005). The average number of beam-off events during whole treatment session was reduced from 457 ± 154 times to 195 ± 90 times by using the VG-PC gating system (P < 0.001). The developed system could improve treatment efficiency when performing respiratory-gated MR-IGRT. The VG-PC gating system could be applied to any kind of bore-type radiotherapy machine. © 2017 American Association of Physicists in Medicine.

The USL NASA PC R and D development environment standards

NASA Technical Reports Server (NTRS)

Dominick, Wayne D. (Editor); Moreau, Dennis R.

1984-01-01

The development environment standards which have been established in order to control usage of the IBM PC/XT development systems and to prevent interference between projects being currently developed on the PC's are discussed. The standards address the following areas: scheduling PC resources; login/logout procedures; training; file naming conventions; hard disk organization; diskette care; backup procedures; and copying policies.

Maximally asymmetric transbilayer distribution of anionic lipids alters the structure and interaction with lipids of an amyloidogenic protein dimer bound to the membrane surface.

PubMed

Cheng, Sara Y; Chou, George; Buie, Creighton; Vaughn, Mark W; Compton, Campbell; Cheng, Kwan H

2016-03-01

We used molecular dynamics simulations to explore the effects of asymmetric transbilayer distribution of anionic phosphatidylserine (PS) lipids on the structure of a protein on the membrane surface and subsequent protein-lipid interactions. Our simulation systems consisted of an amyloidogenic, beta-sheet rich dimeric protein (D42) absorbed to the phosphatidylcholine (PC) leaflet, or protein-contact PC leaflet, of two membrane systems: a single-component PC bilayer and double PC/PS bilayers. The latter comprised of a stable but asymmetric transbilayer distribution of PS in the presence of counterions, with a 1-component PC leaflet coupled to a 1-component PS leaflet in each bilayer. The maximally asymmetric PC/PS bilayer had a non-zero transmembrane potential (TMP) difference and higher lipid order packing, whereas the symmetric PC bilayer had a zero TMP difference and lower lipid order packing under physiologically relevant conditions. Analysis of the adsorbed protein structures revealed weaker protein binding, more folding in the N-terminal domain, more aggregation of the N- and C-terminal domains and larger tilt angle of D42 on the PC leaflet surface of the PC/PS bilayer versus the PC bilayer. Also, analysis of protein-induced membrane structural disruption revealed more localized bilayer thinning in the PC/PS versus PC bilayer. Although the electric field profile in the non-protein-contact PS leaflet of the PC/PS bilayer differed significantly from that in the non-protein-contact PC leaflet of the PC bilayer, no significant difference in the electric field profile in the protein-contact PC leaflet of either bilayer was evident. We speculate that lipid packing has a larger effect on the surface adsorbed protein structure than the electric field for a maximally asymmetric PC/PS bilayer. Our results support the mechanism that the higher lipid packing in a lipid leaflet promotes stronger protein-protein but weaker protein-lipid interactions for a dimeric protein on membrane surfaces. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Long-Lived Triplet Excited States of Bent-Shaped Pentacene Dimers by Intramolecular Singlet Fission.

PubMed

Sakuma, Takao; Sakai, Hayato; Araki, Yasuyuki; Mori, Tadashi; Wada, Takehiko; Tkachenko, Nikolai V; Hasobe, Taku

2016-03-24

Intramolecular singlet fission (ISF) is a promising photophysical process to construct more efficient light energy conversion systems as one excited singlet state converts into two excited triplet states. Herein we synthesized and evaluated bent-shaped pentacene dimers as a prototype of ISF to reveal intrinsic characters of triplet states (e.g., lifetimes of triplet excited states). In this study, meta-phenylene-bridged TIPS-pentacene dimer (PcD-3Ph) and 2,2'-bipheynyl bridged TIPS-pentacene dimer (PcD-Biph) were newly synthesized as bent-shaped dimers. In the steady-state spectroscopy, absorption and emission bands of these dimers were fully characterized, suggesting the appropriate degree of electronic coupling between pentacene moieties in these dimers. In addition, the electrochemical measurements were also performed to check the electronic interaction between two pentacene moieties. Whereas the successive two oxidation peaks owing to the delocalization were observed in a directly linked-pentacene dimer (PcD) by a single bond, the cyclic voltammograms in PcD-Biph and PcD-3Ph implied the weaker interaction compared to that of p-phenylene-bridged TIPS-pentacene dimer (PcD-4Ph) and PcD. The femtosecond and nanosecond transient absorption spectra clearly revealed the slower ISF process in bent-shaped pentacene dimers (PcD-Biph and PcD-3Ph), more notably, the slower relaxation of the excited triplet states in PcD-Biph and PcD-3Ph. Namely, the quantum yields of triplet states (ΦT) by ISF approximately remain constant (ca. 180-200%) in all dimer systems, whereas the lifetimes of the triplet excited states became much longer (up to 360 ns) in PcD-Biph as compared to PcD-4Ph (15 ns). Additionally, the lifetimes of the corresponding triplet states in PcD-Biph and PcD-3Ph were sufficiently affected by solvent viscosity. In particular, the lifetimes of PcD-Biph triplet state in THF/paraffin (1.0 μs) increased up to approximately three times as compared to that in THF (360 ns), whereas those of PcD-4Ph were quite similar in both solvent.

Multitasking Operating Systems for the IBM PC.

ERIC Educational Resources Information Center

Owen, G. Scott

1985-01-01

The ability of a microcomputer to execute several programs at the same time is called "multitasking." The nature and use of one multitasking operating system Concurrent PC-DOS from Digital Research (the developers of the CP/M operating system) are discussed. (JN)

Controlling insulin release from reverse hexagonal (HII) liquid crystalline mesophase by enzymatic lipolysis.

PubMed

Mishraki-Berkowitz, Tehila; Cohen, Guy; Aserin, Abraham; Garti, Nissim

2018-01-01

In the present study we aimed to control insulin release from the reverse hexagonal (H II ) mesophase using Thermomyces lanuginosa lipase (TLL) in the environment (outer TLL) or within the H II cylinders (inner TLL). Two insulin-loaded systems differing by the presence (or absence) of phosphatidylcholine (PC) were examined. In general, incorporation of PC into the H II interface (without TLL) increased insulin release, as a more cooperative system was formed. Addition of TLL to the systems' environments resulted in lipolysis of the H II structure. In the absence of PC, the lipolysis was more dominant and led to a significant increase in insulin release (50% after 8h). However, the presence of PC stabilized the interface, hindering the lipolysis, and therefore no impact on the release profile was detected during the first 8h. Entrapment of TLL within the H II cylinders (with and without PC) drastically increased insulin release in both systems up to 100%. In the presence of PC insulin released faster and the structure was more stable. Consequently, the presence of lipases (inner or outer) both enhanced the destruction of the carrier, and provided sustained release of the entrapped insulin. Copyright © 2017 Elsevier B.V. All rights reserved.

Expert Systems: An Overview.

ERIC Educational Resources Information Center

Adiga, Sadashiv

1984-01-01

Discusses: (1) the architecture of expert systems; (2) features that distinguish expert systems from conventional programs; (3) conditions necessary to select a particular application for the development of successful expert systems; (4) issues to be resolved when building expert systems; and (5) limitations. Examples of selected expert systems…

Acceptance of Internet Banking Systems among Young Managers

NASA Astrophysics Data System (ADS)

Ariff, Mohd Shoki Md; M, Yeow S.; Zakuan, Norhayati; Zaidi Bahari, Ahamad

2013-06-01

The aim of this paper is to determine acceptance of internet banking system among potential young users, specifically future young managers. The relationships and the effects of computer self-efficacy (CSE) and extended technology acceptance model (TAM) on the behavioural intention (BI) to use internet banking system were examined. Measurement of CSE, TAM and BI were adapted from previous studies. However construct for TAM has been extended by adding a new variable which is perceived credibility (PC). A survey through questionnaire was conducted to determine the acceptance level of CSE, TAM and BI. Data were obtained from 275 Technology Management students, who are pursuing their undergraduate studies in a Malaysia's public university. The confirmatory factor analysis performed has identified four variables as determinant factors of internet banking acceptance. The first variable is computer self-efficacy (CSE), and another three variables from TAM constructs which are perceived usefulness (PU), perceived ease of use (PE) and perceived credibility (PC). The finding of this study indicated that CSE has a positive effect on PU and PE of the Internet banking systems. Respondents' CSE was positively affecting their PC of the systems, indicating that the higher the ability of one in computer skills, the higher the security and privacy issues of PC will be concerned. The multiple regression analysis indicated that only two construct of TAM; PU and PC were significantly associated with BI. It was found that the future managers' CSE indirectly affects their BI to use the internet banking systems through PU and PC of TAM. TAM was found to have direct effects on respondents' BI to use the systems. Both CSE and the PU and PC of TAM were good predictors in understanding individual responses to information technology. The role of PE of the original TAM to predict the attitude of users towards the use of information technology systems was surprisingly insignificant.

Biological applications of phase-contrast electron microscopy.

PubMed

Nagayama, Kuniaki

2014-01-01

Here, I review the principles and applications of phase-contrast electron microscopy using phase plates. First, I develop the principle of phase contrast based on a minimal model of microscopy, introducing a double Fourier-transform process to mathematically formulate the image formation. Next, I explain four phase-contrast (PC) schemes, defocus PC, Zernike PC, Hilbert differential contrast, and schlieren optics, as image-filtering processes in the context of the minimal model, with particular emphases on the Zernike PC and corresponding Zernike phase plates. Finally, I review applications of Zernike PC cryo-electron microscopy to biological systems such as protein molecules, virus particles, and cells, including single-particle analysis to delineate three-dimensional (3D) structures of protein and virus particles and cryo-electron tomography to reconstruct 3D images of complex protein systems and cells.

Development of the Low-cost Analog-to-Digital Converter (for nuclear physics experiments) with PC sound card

NASA Astrophysics Data System (ADS)

Sugihara, Kenkoh

2009-10-01

A low-cost ADC (Analogue-to-Digital Converter) with shaping embedded for undergraduate physics laboratory is developed using a home made circuit and a PC sound card. Even though an ADC is needed as an essential part of an experimental set up, commercially available ones are very expensive and are scarce for undergraduate laboratory experiments. The system that is developed from the present work is designed for a gamma-ray spectroscopy laboratory with NaI(Tl) counters, but not limited. For this purpose, the system performance is set to sampling rate of 1-kHz with 10-bit resolution using a typical PC sound card with 41-kHz or higher sampling rate and 16-bit resolution ADC with an addition of a shaping circuit. Details of the system and the status of development will be presented. Ping circuit and PC soundcard as typical PC sound card has 41.1kHz or heiger sampling rate and 16bit resolution ADCs. In the conference details of the system and the status of development will be presented.

Intelligent control system based on ARM for lithography tool

NASA Astrophysics Data System (ADS)

Chen, Changlong; Tang, Xiaoping; Hu, Song; Wang, Nan

2014-08-01

The control system of traditional lithography tool is based on PC and MCU. The PC handles the complex algorithm, human-computer interaction, and communicates with MCU via serial port; The MCU controls motors and electromagnetic valves, etc. This mode has shortcomings like big volume, high power consumption, and wasting of PC resource. In this paper, an embedded intelligent control system of lithography tool, based on ARM, is provided. The control system used S5PV210 as processor, completing the functions of PC in traditional lithography tool, and provided a good human-computer interaction by using LCD and capacitive touch screen. Using Android4.0.3 as operating system, the equipment provided a cool and easy UI which made the control more user-friendly, and implemented remote control and debug, pushing video information of product by network programming. As a result, it's convenient for equipment vendor to provide technical support for users. Finally, compared with traditional lithography tool, this design reduced the PC part, making the hardware resources efficiently used and reducing the cost and volume. Introducing embedded OS and the concepts in "The Internet of things" into the design of lithography tool can be a development trend.

Expert systems in civil engineering

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kostem, C.N.; Maher, M.L.

1986-01-01

This book presents the papers given at a symposium on expert systems in civil engineering. Topics considered at the symposium included problem solving using expert system techniques, construction schedule analysis, decision making and risk analysis, seismic risk analysis systems, an expert system for inactive hazardous waste site characterization, an expert system for site selection, knowledge engineering, and knowledge-based expert systems in seismic analysis.

Highly efficient photodynamic therapy colloidal system based on chloroaluminum phthalocyanine/pluronic micelles.

PubMed

Py-Daniel, Karen R; Namban, Joy S; de Andrade, Laise R; de Souza, Paulo E N; Paterno, Leonardo G; Azevedo, Ricardo B; Soler, Maria A G

2016-06-01

Phthalocyanine derivatives comprise the second generation of photosensitizer molecules employed in photodynamic therapy (PDT) and have attracted much attention due to their outstanding photosensitizing performance. Most phthalocyanines are hydrophobic compounds that require association to drug delivery systems for clinical use. In this study, formulations of Pluronic F127 micelles incorporated with chloroaluminum phthalocyanine, or else F127/AlClPc, were produced at optimized conditions aiming at efficient and biocompatible PDT colloidal systems. Absorption/emission spectroscopies, as well as dynamic light scattering were performed to evaluate the optimum conditions for the F127 micelle formation and AlClPc incorporation. The micelles formation was attained with F127 concentrations ranging from 50 to 150mgmL(-1). At these conditions, AlClPc photosensitizer molecules were encapsulated into the hydrophobic micelle core and, therefore, readily solubilized in physiological medium (PBS pH 7.2). Encapsulation efficiency of about 90% resulted from different AlClPc concentrations. Identification of singlet oxygen production by irradiated F127/AlClPc formulations indicated good applicability for PDT. In vitro tests conducted with A549 human lung carcinoma cell line incubated with the F127/AlClPc formulations, at different AlClPc loadings, followed by only 18min of light irradiation (660nm LED, fluence of 25.3J/cm(2)), showed a cellular damage as high as 90% for rather low dosages of AlClPc (0.1-5.0μgmL(-1)). Further, no cytotoxicity occurred on non-irradiated cells. These findings suggest those F127/AlClPc formulations are highly promising for PDT applications, since they are easily prepared and the incubation and irradiation times are significantly shortened. Copyright © 2016 Elsevier B.V. All rights reserved.

Privacy Impact Assessment for the PC Label System

EPA Pesticide Factsheets

The PC Label System collects contact information for individuals with an interest in EPA's Region 1. Learn how this data will be collected in the system, how it will be used, access to the data, the purpose of data collection, and record retention policies

The Solar Neighborhood. 35. Distances to 1404 M Dwarf Systems Within 25 PC in the Southern Sky

DTIC Science & Technology

2015-01-01

reference, and 2MASS JHKs magnitudes. The table is divided into the 1404 systems within 25 pc (top) and the 344 systems beyond 25 pc (bottom). A number in... 2MASS JHKs magnitudes, as discussed in Section 4.1. The plate R59F magnitude is the second, more recent R epoch measurement of the two available in...the SuperCOSMOS Sky Survey. The term ccddist is used to indicate a distance estimate that combines CCD VRI and 2MASS JHKs magnitudes, as discussed in

An Expert Supervisor For A Robotic Work Cell

NASA Astrophysics Data System (ADS)

Moed, M. C.; Kelley, R. B.

1988-02-01

To increase task flexibility in a robotic assembly environment, a hierarchical planning and execution system is being developed which will map user specified 3D part assembly tasks into various target robotic work cells, and execute these tasks efficiently using manipulators and sensors available in the work cell. One level of this hierarchy, the Supervisor, is responsible for assigning subtasks of a system generated Task Plan to a set of task specific Specialists and on-line coordination of the activity of these Specialists to accomplish the user specified assembly. The design of the Supervisor can be broken down into five major functional blocks: resource management; concurrency detection; task scheduling; error recovery; and interprocess communication. The Supervisor implementation has been completed on a VAX 11/750 under a Unix environment. PC card Pick-Insert experiments were performed to test this implementation. To test the robustness of the architecture, the Supervisor was then transported to a new work cell under a VMS environment. The experiments performed under Supervisor control in both implementations are discussed after a brief explanation of the functional blocks of the Supervisor and the other levels in the hierarchy.

What systemic factors contribute to collaboration between primary care and public health sectors? An interpretive descriptive study.

PubMed

Wong, Sabrina T; MacDonald, Marjorie; Martin-Misener, Ruth; Meagher-Stewart, Donna; O'Mara, Linda; Valaitis, Ruta K

2017-12-01

Purposefully building stronger collaborations between primary care (PC) and public health (PH) is one approach to strengthening primary health care. The purpose of this paper is to report: 1) what systemic factors influence collaborations between PC and PH; and 2) how systemic factors interact and could influence collaboration. This interpretive descriptive study used purposive and snowball sampling to recruit and conduct interviews with PC and PH key informants in British Columbia (n = 20), Ontario (n = 19), and Nova Scotia (n = 21), Canada. Other participants (n = 14) were knowledgeable about collaborations and were located in various Canadian provinces or working at a national level. Data were organized into codes and thematic analysis was completed using NVivo. The frequency of "sources" (individual transcripts), "references" (quotes), and matrix queries were used to identify potential relationships between factors. We conducted a total of 70 in-depth interviews with 74 participants working in either PC (n = 33) or PH (n = 32), both PC and PH (n = 7), or neither sector (n = 2). Participant roles included direct service providers (n = 17), senior program managers (n = 14), executive officers (n = 11), and middle managers (n = 10). Seven systemic factors for collaboration were identified: 1) health service structures that promote collaboration; 2) funding models and financial incentives supporting collaboration; 3) governmental and regulatory policies and mandates for collaboration; 4) power relations; 5) harmonized information and communication infrastructure; 6) targeted professional education; and 7) formal systems leaders as collaborative champions. Most themes were discussed with equal frequency between PC and PH. An assessment of the system level context (i.e., provincial and regional organization and funding of PC and PH, history of government in successful implementation of health care reform, etc) along with these seven system level factors could assist other jurisdictions in moving towards increased PC and PH collaboration. There was some variation in the importance of the themes across provinces. British Columbia participants more frequently discussed system structures that could promote collaboration, power relations, harmonized information and communication structures, formal systems leaders as collaboration champions and targeted professional education. Ontario participants most frequently discussed governmental and regulatory policies and mandates for collaboration.

Expert system application for the loading capability assessment of transmission lines

DOE Office of Scientific and Technical Information (OSTI.GOV)

Le, T.L.; Negnevitsky, M.; Piekutowski, M.

1995-11-01

This paper describes the application of an expert system for the evaluation of the short time thermal rating and temperature rise of overhead conductors. The expert system has been developed using a database and Leonardo expert system shell which is gaining popularity among commercial tools for developing expert system applications. The expert system has been found to compare well when evaluated against the site tests. A practical application is given to demonstrate the usefulness of the expert system developed.

Toward information management in corporations (4)

NASA Astrophysics Data System (ADS)

Yamamoto, Takeo

The roles of personal computers (PC's) and workstations (WS's) in developing the corporate information system is discussed. The history and state of art for PC's and WS's are reviewed. Checkpoints for introducing PC's and WS's are ; Japanese word-processing capabilities, multi-media capabilities and network capabilities.

A STUDY OF THE η^'π^- SYSTEM PRODUCED IN THE REACTION π^-parrowη^'π^- p AT 18 GeV/c

NASA Astrophysics Data System (ADS)

Ivanov-Tatar, Emil

2000-04-01

The η^'π^- system has been studied in the reaction π^-parrowη^'π^- p at 18 GeV/c. The partial wave analysis of 6040 kinematically-identified events shows that the reaction is dominated by natural parity exchange. The production of an exotic isovector state π_1(1600) is observed in the I^G(J^PC) = 1^-(1^-+) wave. The mass and the width of that state are estimated via simultaneous mass-dependent fits of the I^G(J^PC) = 1^-(1^-+) and I^G(J^PC) = 1^-(2^++) waves. The a_2^-(1320) and a wide structure at 1.8 GeV/c^2 are observed in the I^G(J^PC) = 1^-(2^++) wave. The amplitude analysis of the mass interval above 1.8 GeV/c^2 indicates an interference between I^G(J^PC) = 1^-(2^++) and I^G(J^PC) = 1^-(4^++) waves.

Pituitary carcinoma diagnosed on fine needle aspiration: Report of a case and review of pathogenesis

PubMed Central

Yakoushina, Tatiana V.; Lavi, Ehud; Hoda, R. S.

2010-01-01

Pituitary carcinoma (PC) is a very rare entity (0.2% of all pituitary tumors), with only about 140 cases reported in English literature. There are no reliable histological, immunohistochemical or ultrastructural features distinguishing pituitary adenoma (PA) from PC. By definition, a diagnosis of PC is made after a patient with PA develops non-contiguous central nervous system (CNS) or systemic metastases. To date, only three cases of PC have been reportedly diagnosed on fine needle aspiration (FNA). Two of the reported cases were diagnosed on FNA of the cervical lymph nodes and one on FNA of the vertebral bone lesion. Herein, we present a case of PC, diagnosed on FNA of the liver lesion. In this case, we describe cytologic features of PC and compare them to histologic features of the tumor in the pituitary. Clinical behavior of tumor, pathogenesis of metastasis and immunochemical and prognostic markers will also be described. PMID:20806088

Pyrolyzed binuclear-cobalt-phthalocyanine as electrocatalyst for oxygen reduction reaction in microbial fuel cells.

PubMed

Li, Baitao; Wang, Mian; Zhou, Xiuxiu; Wang, Xiujun; Liu, Bingchuan; Li, Baikun

2015-10-01

A novel platinum (Pt)-free cathodic materials binuclear-cobalt-phthalocyanine (Bi-CoPc) pyrolyzed at different temperatures (300-1000 °C) were examined as the oxygen reduction reaction (ORR) catalysts, and compared with unpyrolyzed Bi-CoPc/C and Pt cathode in single chamber microbial fuel cells (SCMFCs). The results showed that the pyrolysis process increased the nitrogen abundance on Bi-CoPc and changed the nitrogen types. The Bi-CoPc pyrolyzed at 800 °C contained a significant amount of pyrrolic-N, and exhibited a high electrochemical catalytic activity. The power density and current density increased with temperature: Bi-CoPc/C-800 > Bi-CoPc/C-1000 > Bi-CoPc/C-600 > Bi-CoPc/C-300 > Bi-CoPc/C. The SCMFC with Bi-CoPc/C-800 cathode had a maximum power density of 604 mW m(-2). The low cost Bi-CoPc compounds developed in this study showed a potential in air-breathing MFC systems, with the proper pyrolysis temperature being chosen. Copyright © 2015 Elsevier Ltd. All rights reserved.

Performance Confirmation Data Aquisition System

DOE Office of Scientific and Technical Information (OSTI.GOV)

D.W. Markman

2000-10-27

The purpose of this analysis is to identify and analyze concepts for the acquisition of data in support of the Performance Confirmation (PC) program at the potential subsurface nuclear waste repository at Yucca Mountain. The scope and primary objectives of this analysis are to: (1) Review the criteria for design as presented in the Performance Confirmation Data Acquisition/Monitoring System Description Document, by way of the Input Transmittal, Performance Confirmation Input Criteria (CRWMS M&O 1999c). (2) Identify and describe existing and potential new trends in data acquisition system software and hardware that would support the PC plan. The data acquisition softwaremore » and hardware will support the field instruments and equipment that will be installed for the observation and perimeter drift borehole monitoring, and in-situ monitoring within the emplacement drifts. The exhaust air monitoring requirements will be supported by a data communication network interface with the ventilation monitoring system database. (3) Identify the concepts and features that a data acquisition system should have in order to support the PC process and its activities. (4) Based on PC monitoring needs and available technologies, further develop concepts of a potential data acquisition system network in support of the PC program and the Site Recommendation and License Application.« less

VizieR Online Data Catalog: New proper motion stars with pm>=0.18"/yr (Boyd+, 2011)

NASA Astrophysics Data System (ADS)

Boyd, M. R.; Henry, T. J.; Jao, W.-C.; Subasavage, J. P.; Hambly, N. C.

2012-11-01

Here we present 1584 new southern proper motion systems with μ>=0.18"/yr and 16.5>R59F>=18.0. This search complements the six previous SuperCOSMOS-RECONS (SCR) proper motion searches of the southern sky for stars within the same proper motion range, but with R59F<=16.5. As in previous papers, we present distance estimates for these systems and find that three systems are estimated to be within 25pc, including one, SCR 1546-5534, possibly within the RECONS 10pc horizon at 6.7pc, making it the second nearest discovery of the searches. We find 97 white dwarf candidates with distance estimates between 10 and 120pc, as well as 557 cool subdwarf candidates. (5 data files).

PC vs. Mac--Which Way Should You Go?

ERIC Educational Resources Information Center

Wodarz, Nan

1997-01-01

Outlines the factors in hardware, software, and administration to consider in developing specifications for choosing a computer operating system. Compares Microsoft Windows 95/NT that runs on PC/Intel-based systems and System 7.5 that runs on the Apple-based systems. Lists reasons why the Microsoft platform clearly stands above the Apple platform.…

Two schemes for rapid generation of digital video holograms using PC cluster

NASA Astrophysics Data System (ADS)

Park, Hanhoon; Song, Joongseok; Kim, Changseob; Park, Jong-Il

2017-12-01

Computer-generated holography (CGH), which is a process of generating digital holograms, is computationally expensive. Recently, several methods/systems of parallelizing the process using graphic processing units (GPUs) have been proposed. Indeed, use of multiple GPUs or a personal computer (PC) cluster (each PC with GPUs) enabled great improvements in the process speed. However, extant literature has less often explored systems involving rapid generation of multiple digital holograms and specialized systems for rapid generation of a digital video hologram. This study proposes a system that uses a PC cluster and is able to more efficiently generate a video hologram. The proposed system is designed to simultaneously generate multiple frames and accelerate the generation by parallelizing the CGH computations across a number of frames, as opposed to separately generating each individual frame while parallelizing the CGH computations within each frame. The proposed system also enables the subprocesses for generating each frame to execute in parallel through multithreading. With these two schemes, the proposed system significantly reduced the data communication time for generating a digital hologram when compared with that of the state-of-the-art system.

Zinc phthalocyanine-loaded PLGA biodegradable nanoparticles for photodynamic therapy in tumor-bearing mice.

PubMed

Fadel, Maha; Kassab, Kawser; Fadeel, Doa Abdel

2010-03-01

Nanoparticles formulated from the biodegradable copolymer poly(lactic-coglycolic acid) (PLGA) were investigated as a drug delivery system to enhance tissue uptake, permeation, and targeting of zinc(II) phthalocyanine (ZnPc) for photodynamic therapy. Three ZnPc nanoparticle formulations were prepared using a solvent emulsion evaporation method and the influence of sonication time on nanoparticle shape, encapsulation and size distribution, in vitro release, and in vivo photodynamic efficiency in tumor-bearing mice were studied. Sonication time did not affect the process yield or encapsulation efficiency, but did affect significantly the particle size. Sonication for 20 min reduced the mean particle size to 374.3 nm and the in vitro release studies demonstrated a controlled release profile of ZnPc. Tumor-bearing mice injected with ZnPc nanoparticles exhibited significantly smaller mean tumor volume, increased tumor growth delay and longer survival compared with the control group and the group injected with free ZnPc during the time course of the experiment. Histopathological examination of tumor from animals treated with PLGA ZnPc showed regression of tumor cells, in contrast to those obtained from animals treated with free ZnPc. The results indicate that ZnPc encapsulated in PLGA nanoparticles is a successful delivery system for improving photodynamic activity in the target tissue.

Electronic transitions and band offsets in C60:SubPc and C60:MgPc on MoO3 studied by modulated surface photovoltage spectroscopy

NASA Astrophysics Data System (ADS)

Fengler, S.; Dittrich, Th.; Rusu, M.

2015-07-01

Electronic transitions at interfaces between MoO3 layers and organic layers of C60, SubPc, MgPc, and nano-composite layers of SubPc:C60 and MgPc:C60 have been studied by modulated surface photovoltage (SPV) spectroscopy. For all systems, time dependent and modulated SPV signals pointed to dissociation of excitons at the MoO3/organic layer interfaces with a separation of holes towards MoO3. The highest occupied molecular orbital (HOMO)-lowest unoccupied molecular orbital (LUMO) gaps (EHL) of C60, SubPc, and MgPc and the effective EHL of SubPc:C60 and MgPc:C60 were measured. The offsets between the LUMO (ΔEL) or HOMO (ΔEH) bands were obtained with high precision and amounted to 0.33 or 0.73 eV for SubPc:C60, respectively, and to -0.33 or 0.67 eV for MgPc:C60, respectively. Exponential tails below EHL and most pronounced sub-bandgap transitions were characterized and ascribed to disorder and transitions from HOMO bands to unoccupied defect states.

Assessment of Uinta Basin Oil and Natural Gas Well Pad ...

EPA Pesticide Factsheets

In the fall of 2016, a field study was conducted in the Uinta Basin Utah to improve information on oil and natural gas well pad pneumatic controllers (PCs) and emission measurement methods. A total of 80 PC systems at five oil sites (supporting six wells) and three gas sites (supporting 12 wells) were surveyed, and emissions data were produced using a combination of measurements and engineering emission estimates. Ninety-six percent of the PCs surveyed were the low actuation frequency intermittent vent type. The overall whole gas emission rate for the study was estimated at 0.37 scfh with the majority of emissions occurring from three continuous vent PCs (1.0 scfh average) and eleven (14%) malfunctioning intermittent vent PC systems (1.6 scfh average). Oil sites employed, on average 10.3 PC systems per well compared to 1.5 for gas sites. Oil and gas sites had group average PC emission rates of 0.28 scfh and 0.67 scfh, respectively, with this difference due in part to site selection procedures. The PC system types encountered, the engineering emissions estimate approach, and comparisons to measurements are described. Survey methods included identification of malfunctioning PC systems and emission measurements with augmented high volume sampling and installed mass flow meters, each providing a somewhat different picture of emissions that are elucidated through example cases. This paper reports on an oil and natural gas well pad pneumatic controller emissions stud

NESSUS/EXPERT - An expert system for probabilistic structural analysis methods

NASA Technical Reports Server (NTRS)

Millwater, H.; Palmer, K.; Fink, P.

1988-01-01

An expert system (NESSUS/EXPERT) is presented which provides assistance in using probabilistic structural analysis methods. NESSUS/EXPERT is an interactive menu-driven expert system that provides information to assist in the use of the probabilistic finite element code NESSUS/FEM and the fast probability integrator. NESSUS/EXPERT was developed with a combination of FORTRAN and CLIPS, a C language expert system tool, to exploit the strengths of each language.

Analysis of bone marrow plasma cells in patients with solitary bone plasmacytoma.

PubMed

Bhaskar, Archana; Gupta, Ritu; Sharma, Atul; Kumar, Lalit; Jain, Paresh

Local radiotherapy is the treatment of choice for solitary bone plasmacytoma (SBP) and the role of adjuvant systemic chemotherapy in preventing progression to multiple myeloma (MM) is controversial. The purpose of this study was to examine the presence of systemic disease in the form of neoplastic plasma cells (PC) in bone marrow of patients with SBP. Flow cytometric immunophenotyping of PC was carried out on bone marrow aspirate of 7 patients using monoclonal antibodies: CD19 FITC, CD45 FITC, CD20 FITC, CD52 PE, CD117 PE, CD56 PE, CD38 PerCP-Cy5.5, CD138 APC, anti-kappa (κ) FITC and anti-lambda (λ) PE. The neoplastic as well as normal PC were identified in bone marrow aspirate of all the patients at the time of diagnosis; the neoplastic PC ranged from 0.1%to 0.7% of all BM cells and 33.5% to 89.7% of total BMPC. The κ:λ ratio was normal in all the samples ranging from 0.5% to 1.6%. The present work shows the presence of systemic disease in the form of neoplastic PC in bone marrow of patients with SBP. Prospective studies would be required to study if the levels of neoplastic PC in the bone marrow may help us identify patients who are likely to progress to overt MM and benefit from systemic chemotherapy.

Reverse osmosis water purification system

NASA Technical Reports Server (NTRS)

Ahlstrom, H. G.; Hames, P. S.; Menninger, F. J.

1986-01-01

A reverse osmosis water purification system, which uses a programmable controller (PC) as the control system, was designed and built to maintain the cleanliness and level of water for various systems of a 64-m antenna. The installation operates with other equipment of the antenna at the Goldstone Deep Space Communication Complex. The reverse osmosis system was designed to be fully automatic; with the PC, many complex sequential and timed logic networks were easily implemented and are modified. The PC monitors water levels, pressures, flows, control panel requests, and set points on analog meters; with this information various processes are initiated, monitored, modified, halted, or eliminated as required by the equipment being supplied pure water.

Primary analysis for clinical efficacy of immunotherapy in patients with pancreatic cancer.

PubMed

Chen, Linghua; Zhang, Xiaoyan

2016-02-01

Immunotherapy is an important treatment for pancreatic cancer (PC) patients. To evaluate the therapeutic efficacy of immunotherapy in the treatment of PC, we performed a systemic review and meta-analysis of the relevant published clinical trials, collectively referred to as DC, DC-CIK, LAK, NK and GM-CSF secreting PC cell lines.  A total of 413 patients in 11 eligible trials with PC were selected for the present meta-analysis. The estimated pooled overall survival showed a significant improvement for PC patients who received immunotherapy compared with nonimmunotherapy. The lymphocyte subsets, immune cytokine levels and serum cancer markers in the peripheral blood of PC patients were significantly improved after immunotherapy. The results showed that immunotherapy can improve the efficacy of the treatment of PC patients.

Design of real-time communication system for image recognition based colony picking instrument

NASA Astrophysics Data System (ADS)

Wang, Qun; Zhang, Rongfu; Yan, Hua; Wu, Huamin

2017-11-01

In order to aachieve autommated observatiion and pickinng of monocloonal colonies, an overall dessign and realizzation of real-time commmunication system based on High-throoughput monooclonal auto-piicking instrumment is propossed. The real-time commmunication system is commposed of PCC-PLC commuunication systtem and Centrral Control CComputer (CCC)-PLC communicatioon system. Bassed on RS232 synchronous serial communnication methood to develop a set of dedicated shoort-range commmunication prootocol betweenn the PC and PPLC. Furthermmore, the systemm uses SQL SSERVER database to rrealize the dataa interaction between PC andd CCC. Moreoover, the commmunication of CCC and PC, adopted Socket Ethernnet communicaation based on TCP/IP protoccol. TCP full-dduplex data cannnel to ensure real-time data eexchange as well as immprove system reliability andd security. We tested the commmunication syystem using sppecially develooped test software, thee test results show that the sysstem can realizze the communnication in an eefficient, safe aand stable way between PLC, PC andd CCC, keep thhe real-time conntrol to PLC annd colony inforrmation collecttion.

Podocalyxin Is a Novel Polysialylated Neural Adhesion Protein with Multiple Roles in Neural Development and Synapse Formation

PubMed Central

Vitureira, Nathalia; Andrés, Rosa; Pérez-Martínez, Esther; Martínez, Albert; Bribián, Ana; Blasi, Juan; Chelliah, Shierley; López-Doménech, Guillermo; De Castro, Fernando; Burgaya, Ferran; McNagny, Kelly; Soriano, Eduardo

2010-01-01

Neural development and plasticity are regulated by neural adhesion proteins, including the polysialylated form of NCAM (PSA-NCAM). Podocalyxin (PC) is a renal PSA-containing protein that has been reported to function as an anti-adhesin in kidney podocytes. Here we show that PC is widely expressed in neurons during neural development. Neural PC interacts with the ERM protein family, and with NHERF1/2 and RhoA/G. Experiments in vitro and phenotypic analyses of podxl-deficient mice indicate that PC is involved in neurite growth, branching and axonal fasciculation, and that PC loss-of-function reduces the number of synapses in the CNS and in the neuromuscular system. We also show that whereas some of the brain PC functions require PSA, others depend on PC per se. Our results show that PC, the second highly sialylated neural adhesion protein, plays multiple roles in neural development. PMID:20706633

PC Vendor Viability, or Whatever Happened to HiTech International?

ERIC Educational Resources Information Center

Crawford, Walt

1993-01-01

Reports on the feasibility of vendors of IBM PC compatible computers based on issues of "PC Magazine" from September 1985 to the present. Results by year are given in tabular and text form. Implications of orphan systems for libraries, advertising problems, and predictors of success are discussed. (EAM)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chew, K. W.; Chen, S. S.; Pang, W. L.

The effects of Lithium triflate salt (LiCF{sub 3}SO{sub 3}), on the poly (methyl methacrylate)(PMMA)-based solid polymer electrolytes plasticized with propylene carbonate (PC) solvated in Tetrahydrofuran (THF) have been studied through a.c impedance spectroscopy and infrared spectroscopy. Lithium triflate was incorporated into the predetermined PMMA/PC system that has the highest value of ionic conductivity. In current investigations, four combination systems: Pure PMMA, (PMMA+PC) systems, (PMMA+LiCF{sub 3}SO{sub 3}) and (PMMA+PC+LiCF{sub 3}SO{sub 3}) systems were prepared using the solution cast method. Solutions were stirred for numerous hours to obtain a homogenous solution before it is poured into the petri dishes under ambient temperaturemore » to form the solid electrolyte thin film. The films were then removed from petri discs and transferred into the dessicator for further drying prior to the different tests. From the characterization done through the a.c impedance spectroscopy, the highest room temperature ionic conductivity in the pure PMMA sample, (PMMA+PC) system and (PMMA+LiCF{sub 3}SO{sub 3}) system is 2.83x10{sup -12} Scm{sup -1}, 4.39x10{sup -11} Scm{sup -1} and 3.93x10{sup -6} Scm{sup -1} respectively. The conductivity for (PMMA+PC+LiCF{sub 3}SO{sub 3}) system was obtained with the 30 wt% of lithium triflate, which is 2.48x10{sup -5} Scm{sup -1}. Infrared spectroscopy shows that complexation occurred between the polymer and the plasticizer, and the polymer and plasticizer and salt. The interactions have been studied in the C=O band, C-O-C band and the O-CH{sub 3} band.« less

Is directly observed tuberculosis treatment strategy patient-centered? A mixed method study in Addis Ababa, Ethiopia

PubMed Central

Getahun, Belete; Nkosi, Zethu Zerish

2017-01-01

Introduction The directly observed treatment, short course (DOTS) strategy has been considered as an efficacious approach for better tuberculosis (TB) treatment adherence and outcome. However, its level of patient centerdness has not been studied and documented well. Hence, the study aimed to determine the level of patient centeredness’ of the DOTS. Method The study used explanatory sequential mixed method design in Addis Ababa, Ethiopia. The study employed an interviewer-administered questionnaire with 601 patients with TB, focus group discussions with 23 TB experts, and telephonic-interview with 25 persons lost to follow-up from TB treatment. Descriptive and multivariable analyses carried out for the quantitative data while thematic analysis was used for the qualitative data. Result Forty percent of patients with TB had not received patient-centered TB care (PC-TB care) with DOTS. Male gender (AOR = 0.45, 95% CI 0.3, 0.7), good communication (AOR = 3.2, 95%CI 1.6, 6.1), and health care providers as a treatment supporter (AOR = 3.4, 95% CI 2.1, 5.48) had significant associations with PC-TB care. All persons lost to follow-up and TB experts perceived that DOTS is merely patient-centered. The identified categories were patient preferences, treatment supporter choice, integration of DOTS with nutritional support, mental health, and transport services, provider’s commitment and communication skills. Conclusion DOTS is limited to provide patient-centered TB care. Hence, DOTS needs a model that enhances effectiveness towards patient centeredness of TB care. PMID:28763456

Genetic inactivation of prohormone convertase (PC1) causes a reduction in cholecystokinin (CCK) levels in the hippocampus, amygdala, pons and medulla in mouse brain that correlates with the degree of colocalization of PC1 and CCK mRNA in these structures in rat brain.

PubMed

Cain, B M; Connolly, K; Blum, A C; Vishnuvardhan, D; Marchand, J E; Zhu, X; Steiner, D F; Beinfeld, M C

2004-04-01

Prohormone convertase (PC1) is found in endocrine cell lines that express cholecystokinin (CCK) mRNA and process pro CCK to biologically active products. Other studies have demonstrated that PC1 may be a one of the enzymes responsible for the endoproteolytic cleavages that occur in pro CCK during its biosynthesis and processing. Prohormone convertase 1 (PC1) has a distribution that is similar to cholecystokinin (CCK) in rat brain. A moderate to high percentage of CCK mRNA-positive neurons express PC1 mRNA. CCK levels were measured in PC1 knockout and control mice to assess the degree to which loss of PC1 changed CCK content. CCK levels were decreased 62% in hippocampus, 53% in amygdala and 57% in pons-medulla in PC1 knockout mice as compared to controls. These results are highly correlated with the colocalization of CCK and PC1. The majority of CCK mRNA-positive neurons in the pyramidal cell layer of the hippocampus express PC1 mRNA and greater than 50% of CCK mRNA-positive neurons in several nuclei of the amygdala also express PC1. These results demonstrate that PC1 is important for CCK processing. PC2 and PC5 are also widely colocalized with CCK. It may be that PC2, PC5 or another non-PC enzyme are able to substitute for PC1 and sustain production of some amidated CCK. Together these enzymes may represent a redundant system to insure the production of CCK.

Tablet PC as a mobil PACS terminal using wireless LAN

NASA Astrophysics Data System (ADS)

Tsao, Bo-Shen; Ching, Yu-Tai; Lee, Wen-Jeng; Chen, Shyh-Jye; Chang, Chia-Hung; Chen, Chien-Jung; Yen, York; Lee, Yuan-Ten

2003-05-01

A PACS mobile terminal has applications in ward round, emergency room and remote teleradiology consultation. Personal Digital Assistants (PDAs) have the highest mobility and are used for many medical applications. However, their roles are limited in the field of radiology due to small screen size. In this study, we built a wireless PACS terminal using a hand-held tablet-PC. A tablet PC (X-pilot, LEO systems, Taiwan) running the WinCE operating systems was used as our mobile PACS terminal. This device is equipped with 800×600 resolution 10.4 inch TFT monitor. The network connection between the tablet PC and the server was linked via wireless LAN (IEEE 802.11b).

Systems Analysis of Life Support for Long-Duration Missions

NASA Technical Reports Server (NTRS)

Drysdale, Alan E.; Maxwell, Sabrina; Ewert, Michael K.; Hanford, Anthony J.

2000-01-01

Work defining advanced life support (ALS) technologies and evaluating their applicability to various long-duration missions has continued. Time-dependent and time-invariant costs have been estimated for a variety of life support technology options, including International Space Station (ISS) environmental control and life support systems (ECLSS) technologies and improved options under development by the ALS Project. These advanced options include physicochemical (PC) and bioregenerative (BIO) technologies, and may in the future include in-situ resource utilization (ISRU) in an attempt to reduce both logistics costs and dependence on supply from Earth. PC and bioregenerative technologies both provide possibilities for reducing mission equivalent system mass (ESM). PC technologies are most advantageous for missions of up to several years in length, while bioregenerative options are most appropriate for longer missions. ISRU can be synergistic with both PC and bioregenerative options.

WF/PC internal molecular contamination during system thermal-vacuum test

NASA Technical Reports Server (NTRS)

Taylor, Daniel M.; Barengoltz, J.; Jenkins, T.; Leschly, K.; Triolo, J.

1988-01-01

During the recent system thermal vacuum test of the Wide-Field/Planetary Camera (WF/PC), instrumentation was added to the WF/PC to characterize the internal molecular contamination and verify the instrument throughput down to 1470 angstroms. Analysis of data elements revealed two contaminants affecting the far-ultraviolet (FUV) performance of the WF/PC. The one contaminant (heavy volatile) is correlated with the electronic and housing temperature, and the contamination is significantly reduced when the electronics are operated below plus 8 degrees to plus 10 degrees C. The other contaminant (light volatile) is controlled by the heat pipe temperature, and the contamination is significantly reduced when the Thermal Electric Cooler (TEC) hot-junction temperature is below minus 40 degrees to minus 50 degrees C. The utility of contamination sensors located behind instruments during system tests was demonstrated.

A demonstration of expert systems applications in transportation engineering : volume I, transportation engineers and expert systems.

DOT National Transportation Integrated Search

1987-01-01

Expert systems, a branch of artificial-intelligence studies, is introduced with a view to its relevance in transportation engineering. Knowledge engineering, the process of building expert systems or transferring knowledge from human experts to compu...

PC-based Multiple Information System Interface (PC/MISI) design plan

NASA Technical Reports Server (NTRS)

Dominick, Wayne D. (Editor); Hall, Philip P.

1985-01-01

The general design plan for the implementation of a common user interface to multiple remote information systems within a microcomputer-based environment is presented. The intent is to provide a framework for the development of detailed specifications which will be used as guidelines for the actual development of the system.

Pacer Comet 4: Automated Jet Engine Testing of a TF33-P100 Pratt & Whitney Engine

NASA Astrophysics Data System (ADS)

Mason, Rex Bolding

Pacer Comet 4 found its life out of necessity to replace an obsolescent Pacer Comet 3 engine test system at Tinker AFB in Oklahoma City, OK. Pacer Comet 3 (PC3) was created and installed in the early 1980's to test jet engines from a wide range of planes. PC3 had several problems from a maintenance standpoint: contractors designed and installed the system but the contract did not include the OEM data package. Without drawings or design knowledge, fixing the smallest of problems could turn into a multi-day project. In addition to high cost, as the OEM companies of proprietary parts went out of business, it became impossible to find a replacement for a failed part. These issues set the framework for the Pacer Comet 4 (PC4) system. PC4 was created as an organic AF and Department of Defense collaboration to fix the issues with PC3. PC4 provides the customer with a complete data package including multiple drawing sets and data sheets for all parts used, as well as design files for all PCBs created in house. PC4 has a standard to use commercially available off the shelf parts (COTS). The reason for this is sustainability in maintenance. If a part is to fail, it should be able to be purchased from any manufacturer that meets the specs of the original product. No proprietary parts are used, except as directed by the engine's OEM. This thesis will focus on the design and installation of the on-frame data acquisition PC4 system for the Pratt & Whitney TF33-P100A-QEC engine that is currently in use on the E3 Sentry. This thesis will show efficiency improvements for maintenance sustainability (70% cabling reduction) as well as discuss performance improvements in both test and production environments.

PCLIPS: Parallel CLIPS

NASA Technical Reports Server (NTRS)

Gryphon, Coranth D.; Miller, Mark D.

1991-01-01

PCLIPS (Parallel CLIPS) is a set of extensions to the C Language Integrated Production System (CLIPS) expert system language. PCLIPS is intended to provide an environment for the development of more complex, extensive expert systems. Multiple CLIPS expert systems are now capable of running simultaneously on separate processors, or separate machines, thus dramatically increasing the scope of solvable tasks within the expert systems. As a tool for parallel processing, PCLIPS allows for an expert system to add to its fact-base information generated by other expert systems, thus allowing systems to assist each other in solving a complex problem. This allows individual expert systems to be more compact and efficient, and thus run faster or on smaller machines.

Effects of recombinant human keratinocyte growth factor on surfactant, plasma, and liver phospholipid homeostasis in hyperoxic neonatal rats.

PubMed

Raith, Marco; Schaal, Katharina; Koslowski, Roland; Fehrenbach, Heinz; Poets, Christian F; Schleicher, Erwin; Bernhard, Wolfgang

2012-04-01

Respiratory distress and bronchopulmonary dysplasia (BPD) are major problems in preterm infants that are often addressed by glucocorticoid treatment and increased oxygen supply, causing catabolic and injurious side effects. Recombinant human keratinocyte growth factor (rhKGF) is noncatabolic and antiapoptotic and increases surfactant pools in immature lungs. Despite its usefulness in injured neonatal lungs, the mechanisms of improved surfactant homeostasis in vivo and systemic effects on lipid homeostasis are unknown. We therefore exposed newborn rats to 85% vs. 21% oxygen and treated them systemically with rhKGF for 48 h before death at 7 days. We determined type II pneumocyte (PN-II) proliferation, surfactant protein (SP) mRNA expression, and the pulmonary metabolism of individual phosphatidylcholine (PC) species using [D(9)-methyl]choline and tandem mass spectrometry. In addition, we assessed liver and plasma lipid metabolism, addressing PC synthesis de novo, the liver-specific phosphatidylethanolamine methyl transferase (PEMT) pathway, and triglyceride concentrations. rhKGF was found to maintain PN-II proliferation and increased SP-B/C expression and surfactant PC in both normoxic and hyperoxic lungs. We found increased total PC together with decreased [D(9)-methyl]choline enrichment, suggesting decreased turnover rather than increased secretion and synthesis as the underlying mechanism. In the liver, rhKGF increased PC synthesis, both de novo and via PEMT, underlining the organotypic differences of rhKGF actions on lipid metabolism. rhKGF increased the hepatic secretion of newly synthesized polyunsaturated PC, indicating improved systemic supply with choline and essential fatty acids. We suggest that rhKGF has potential as a therapeutic agent in neonates by improving pulmonary and systemic PC homeostasis.

A Comparison of the Apple Macintosh and IBM PC in Laboratory Applications.

ERIC Educational Resources Information Center

Williams, Ron

1986-01-01

Compares Apple Macintosh and IBM PC microcomputers in terms of their usefulness in the laboratory. No attempt is made to equalize the two computer systems since they represent opposite ends of the computer spectrum. Indicates that the IBM PC is the most useful general-purpose personal computer for laboratory applications. (JN)

Determination of drug lipophilicity by phosphatidylcholine-modified microemulsion high-performance liquid chromatography.

PubMed

Xuan, Xueyi; Xu, Liyuan; Li, Liangxing; Gao, Chongkai; Li, Ning

2015-07-25

A new biomembrane-mimetic liquid chromatographic method using a C8 stationary phase and phosphatidylcholine-modified (PC-modified) microemulsion mobile phase was used to estimate unionized and ionized drugs lipophilicity expressed as an n-octanol/water partition coefficient (logP and logD). The introduction of PC into sodium dodecyl sulfate (SDS) microemulsion yielded a good correlation between logk and logD (R(2)=0.8). The optimal composition of the PC-modified microemulsion liquid chromatography (PC-modified MELC) mobile phase was 0.2% PC-3.0% SDS-6.0% n-butanol-0.8% ethyl acetate-90.0% water (pH 7.0) for neutral and ionized molecules. The interactions between the analytes and system described by this chromatographic method is more similar to biological membrane than the n-octanol/water partition system. The result in this paper suggests that PC-modified MELC can serve as a possible alternative to the shake-flask method for high-throughput unionized and ionized drugs lipophilicity determination and simulation of biological processes. Copyright © 2015 Elsevier B.V. All rights reserved.

ART-Ada: An Ada-based expert system tool

NASA Technical Reports Server (NTRS)

Lee, S. Daniel; Allen, Bradley P.

1990-01-01

The Department of Defense mandate to standardize on Ada as the language for software systems development has resulted in an increased interest in making expert systems technology readily available in Ada environments. NASA's Space Station Freedom is an example of the large Ada software development projects that will require expert systems in the 1990's. Another large scale application that can benefit from Ada based expert system tool technology is the Pilot's Associate (PA) expert system project for military combat aircraft. The Automated Reasoning Tool-Ada (ART-Ada), an Ada expert system tool, is explained. ART-Ada allows applications of a C-based expert system tool called ART-IM to be deployed in various Ada environments. ART-Ada is being used to implement several prototype expert systems for NASA's Space Station Freedom program and the U.S. Air Force.

ART-Ada: An Ada-based expert system tool

NASA Technical Reports Server (NTRS)

Lee, S. Daniel; Allen, Bradley P.

1991-01-01

The Department of Defense mandate to standardize on Ada as the language for software systems development has resulted in increased interest in making expert systems technology readily available in Ada environments. NASA's Space Station Freedom is an example of the large Ada software development projects that will require expert systems in the 1990's. Another large scale application that can benefit from Ada based expert system tool technology is the Pilot's Associate (PA) expert system project for military combat aircraft. Automated Reasoning Tool (ART) Ada, an Ada Expert system tool is described. ART-Ada allow applications of a C-based expert system tool called ART-IM to be deployed in various Ada environments. ART-Ada is being used to implement several prototype expert systems for NASA's Space Station Freedom Program and the U.S. Air Force.

Preliminary study of efficacy of dynamic compression system in the correction of typical pectus carinatum.

PubMed

Lopez, Manuel; Patoir, Arnaud; Varlet, François; Perez-Etchepare, Eduardo; Tiffet, Théophile; Villard, Aurelien; Tiffet, Olivier

2013-11-01

This preliminary study evaluates, by qualitative score, the efficacy of the dynamic compression system (DCS) with a pressure-measuring device in the treatment of pectus carinatum (PC) as an alternative to surgery. A total of 68 patients (infants, adolescents and young adults) presenting with typical PC (64 males and 4 females) were evaluated in our Chest Wall Deformities Unit, between October 2011 and February 2013. The criteria for including subjects were: patients with typical condrogladiolar PC and pressure for initial correction (PIC) ≤ 9 PSI (pound square inch). Seven patients were excluded in this study: three typical PC were treated by minimal invasive surgery (Abramson technique) due to highly elevated PIC and four atypical PC, hybrids forms (PE and PC) were treated by cup suction for pectus excavatum and by the DCS for the PC. The management protocol included: adjustment of the DCS, strengthening exercises and monthly clinical follow-up. The partial and final results were evaluated by the patients, by their parents or by both, using a qualitative scoring scale that was measured in a three-step grading system, where C is a low or very low result, B is acceptable and A is a very good or excellent result. A total of 61 patients (59 males and 2 females) presenting with typical PC were treated by the DCS and included: symmetric PC in 43 cases and asymmetric PC in 18 cases. The mean age was 13.5 years (5-25). The mean PIC was 6.3 PSI (3-9 PSI). The mean utilization time was 19 h daily. The patients were divided into three groups. In Group I, consisting of 35 cases, all the patients have already completed the treatment with excellent aesthetic results (A). In 12 cases, Group II, the normal shape of the thorax has been obtained; all the patients in this group rated their results as excellent (A); however, these patients are still wearing the brace as a retainer for 3 additional months. Fourteen patients, Group III, are progressing and improving under active treatment, and surgeons and patients are very satisfied with the initial results. None of the 61 patients in this study abandoned the treatment and no complications were found. This preliminary study demonstrated that the DCS with a pressure-measuring device is a minimal invasive system effective for treatment of PC in patients where the anterior chest wall is still compliant. The control of different pressure measurements could be used as the inclusion criterion as well as a predictive factor for aesthetic results and treatment duration.

Porting a Mental Expert System to a Mainstream Programming Environment

PubMed Central

Jao, Chiang S.; Hier, Daniel B.; Dollear, Winifred; Fu, Wenying

2001-01-01

Expert systems are increasingly being applied to problems in medical diagnosis and treatment. Initial medical expert systems were programmed in specialized “expert system” shell programming environments. As the power of mainstream programming languages has increased, it has become possible to implement medical expert systems within these mainstream languages. We originally implemented an expert system to record and score the mental status examination utilizing a specialized expert system programming environment. We have now ported that application to a mainstream programming environment without losing any functionality of an accurate and comprehensive diagnostic tool. New system supplements the need of normative consultation report and offline reference library to the traditional patient care system.

Developing a palliative care service model for Muslim Middle Eastern countries.

PubMed

Al-Awamer, Ahmed; Downar, James

2014-12-01

Palliative Care (PC) was first introduced to Muslim Middle Eastern (MME) countries in 1992, but growth of PC has been slow and access to PC is still limited in the region. While most PC models have been developed in Western countries, MME societies have different cultural and religious values that are not incorporated in Western models. We conducted a qualitative study to look at these differences, in order to inform a culturally acceptable model of PC that meets the needs of MME patients and their families. We conducted semi-structured interviews of PC physicians and nurses with experience in both Western and MME countries. Participants were identified by snowball sampling. Interviews were transcribed and analyzed using a modified grounded-theory approach. We achieved conceptual saturation after 13 interviews. Participants identified four differences between PC practice in Western and MME countries including: cultural differences, legal and policy differences, stances on PC philosophy, and the availability of resources and support for PC. Participants identified five barriers to advancing PC in the MME: shortage of resources, unclear laws and policies, healthcare system barriers, unfamiliarity with the role and benefits of PC, and cultural barriers. Respondents suggested many facilitators at the institutional, regional, and societal levels. We identified a number of important differences in PC practice, as well as common barriers and facilitators for developing PC services in MME countries. This information can help clinicians who are developing PC services in a MME country.

USL/DBMS NASA/PC R and D project system design standards

NASA Technical Reports Server (NTRS)

Dominick, Wayne D. (Editor); Moreau, Dennis R.

1984-01-01

A set of system design standards intended to assure the completeness and quality of designs developed for PC research and development projects is established. The standards presented address the areas of problem definition, initial design plan, design specification, and re-evaluation.

REPDOSE: A database on repeated dose toxicity studies of commercial chemicals--A multifunctional tool.

PubMed

Bitsch, A; Jacobi, S; Melber, C; Wahnschaffe, U; Simetska, N; Mangelsdorf, I

2006-12-01

A database for repeated dose toxicity data has been developed. Studies were selected by data quality. Review documents or risk assessments were used to get a pre-screened selection of available valid data. The structure of the chemicals should be rather simple for well defined chemical categories. The database consists of three core data sets for each chemical: (1) structural features and physico-chemical data, (2) data on study design, (3) study results. To allow consistent queries, a high degree of standardization categories and glossaries were developed for relevant parameters. At present, the database consists of 364 chemicals investigated in 1018 studies which resulted in a total of 6002 specific effects. Standard queries have been developed, which allow analyzing the influence of structural features or PC data on LOELs, target organs and effects. Furthermore, it can be used as an expert system. First queries have shown that the database is a very valuable tool.

The MMPI Assistant: A Microcomputer Based Expert System to Assist in Interpreting MMPI Profiles

PubMed Central

Tanner, Barry A.

1989-01-01

The Assistant is an MS DOS program to aid clinical psychologists in interpreting the results of the Minnesota Multiphasic Personality Inventory (MMPI). Interpretive hypotheses are based on the professional literature and the author's experience. After scores are entered manually, the Assistant produces a hard copy which is intended for use by a psychologist knowledgeable about the MMPI. The rules for each hypothesis appear first on the monitor, and then in the printed output, followed by the patient's scores on the relevant scales, and narrative hypotheses for the scores. The data base includes hypotheses for 23 validity configurations, 45 two-point clinical codes, 10 high scoring single-point clinical scales, and 10 low scoring single-point clinical scales. The program can accelerate the production of test reports, while insuring that actuarial rules are not overlooked. It has been especially useful as a teaching tool with graduate students. The Assistant requires an IBM PC compatible with 128k available memory, DOS 2.x or higher, and a printer.

Web-based radiology: a future to be created.

PubMed

Canadè, Adolfo; Palladino, Francesco; Pitzalis, Gianluca; Campioni, Paolo; Marano, Pasquale

2003-01-01

The impact of Internet on Medicine and Surgery is certainly remarkable, however the influence it had on Diagnostic Imaging was even stronger. The standardization of digital images acquired by the different medical imaging equipment has further facilitated the diffusion, transmission and communication in radiology within hospitals as well as on WEB. Radiology departments are bound to become "filmless" and with the present "tablet PC" radiological images will be directly transferred to the patient's bed in the relative electronic patient report. For radiology, interactive education could be envisaged with a tutor who guides the student(s) through the network. The Internet is an inexhaustible source of radiologic educational and information material with a number of sites of clinical cases, tutorial and teaching files, journals and magisterial lectures on-line. In a near future, the Internet could be applied in the simulation of clinicoradiologic cases or in applications of artificial intelligence with expert systems to support the solution of most complex cases.

Diketopyrrolopyrrole-based polymer:fullerene nanoparticle films with thermally stable morphology for organic photovoltaic applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Holmes, Natalie P.; Vaughan, Ben; Williams, Evan L.

Polymer:fullerene nanoparticles (NPs) offer two key advantages over bulk heterojunction (BHJ) films for organic photovoltaics (OPVs), water-processability and potentially superior morphological control. Once an optimal active layer morphology is reached, maintaining this morphology at OPV operating temperatures is key to the lifetime of a device. Here in this paper we study the morphology of the PDPP-TNT (poly{3,6-dithiophene-2-yl-2,5-di(2-octyldodecyl)-pyrrolo[3,4-c]pyrrole-1,4-dione-alt-naphthalene}):PC 71BM ([6,6]-phenyl C 71 butyric acid methyl ester) NP system and then compare the thermal stability of NP and BHJ films to the common poly(3-hexylthiophene) (P3HT): phenyl C 61 butyric acid methyl ester (PC 61BM) system. We find that material T g playsmore » a key role in the superior thermal stability of the PDPP-TNT:PC 71BM system; whereas for the P3HT:PC 61BM system, domain structure is critical.« less

Pc-based car license plate reading

NASA Astrophysics Data System (ADS)

Tanabe, Katsuyoshi; Marubayashi, Eisaku; Kawashima, Harumi; Nakanishi, Tadashi; Shio, Akio

1994-03-01

A PC-based car license plate recognition system has been developed. The system recognizes Chinese characters and Japanese phonetic hiragana characters as well as six digits on Japanese license plates. The system consists of a CCD camera, vehicle sensors, a strobe unit, a monitoring center, and an i486-based PC. The PC includes in its extension slots: a vehicle detector board, a strobe emitter board, and an image grabber board. When a passing vehicle is detected by the vehicle sensors, the strobe emits a pulse of light. The light pulse is synchronized with the time the vehicle image is frozen on an image grabber board. The recognition process is composed of three steps: image thresholding, character region extraction, and matching-based character recognition. The recognition software can handle obscured characters. Experimental results for hundreds of outdoor images showed high recognition performance within relatively short performance times. The results confirmed that the system is applicable to a wide variety of applications such as automatic vehicle identification and travel time measurement.

An expert system for the design of heating, ventilating, and air-conditioning systems

NASA Astrophysics Data System (ADS)

Camejo, Pedro Jose

1989-12-01

Expert systems are computer programs that seek to mimic human reason. An expert system shelf, a software program commonly used for developing expert systems in a relatively short time, was used to develop a prototypical expert system for the design of heating, ventilating, and air-conditioning (HVAC) systems in buildings. Because HVAC design involves several related knowledge domains, developing an expert system for HVAC design requires the integration of several smaller expert systems known as knowledge bases. A menu program and several auxiliary programs for gathering data, completing calculations, printing project reports, and passing data between the knowledge bases are needed and have been developed to join the separate knowledge bases into one simple-to-use program unit.

MARBLE: A system for executing expert systems in parallel

NASA Technical Reports Server (NTRS)

Myers, Leonard; Johnson, Coe; Johnson, Dean

1990-01-01

This paper details the MARBLE 2.0 system which provides a parallel environment for cooperating expert systems. The work has been done in conjunction with the development of an intelligent computer-aided design system, ICADS, by the CAD Research Unit of the Design Institute at California Polytechnic State University. MARBLE (Multiple Accessed Rete Blackboard Linked Experts) is a system of C Language Production Systems (CLIPS) expert system tool. A copied blackboard is used for communication between the shells to establish an architecture which supports cooperating expert systems that execute in parallel. The design of MARBLE is simple, but it provides support for a rich variety of configurations, while making it relatively easy to demonstrate the correctness of its parallel execution features. In its most elementary configuration, individual CLIPS expert systems execute on their own processors and communicate with each other through a modified blackboard. Control of the system as a whole, and specifically of writing to the blackboard is provided by one of the CLIPS expert systems, an expert control system.

Psychology of developing and designing expert systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tonn, B.; MacGregor, D.

This paper discusses psychological problems relevant to developing and designing expert systems. With respect to the former, the psychological literature suggests that several cognitive biases may affect the elicitation of a valid knowledge base from the expert. The literature also suggests that common expert system inference engines may be quite inconsistent with reasoning heuristics employed by experts. With respect to expert system user interfaces, care should be taken when eliciting uncertainty estimates from users, presenting system conclusions, and ordering questions.

Automated processing of leucocyte-poor platelet concentrates.

PubMed

Tandy, N P; Seghatchian, M J; Bessos, H

1992-10-01

In view of transfusion reactions and alloimmunization associated with leucocyte contamination of platelet concentrates (PC), there is a general move towards the production of leuco-poor PC. This goal is currently pursued by the production of various PC using buffy coat and apheresis techniques. Although there is no overall consensus on the meaning of 'leuco-poor', by assuming that this refers to a level of 5-50 x 10(7) leucocytes per PC, we were able to make comparisons with available systems used in Europe. In addition to platelet and white cell counts, other markers of PC quality were assessed in some cases. These included traditional markers (such as hypotonic stress response, pH, and lactate and beta-thromboglobulin levels) and newer markers (such as glycocalicin and plasma von Willebrand factor levels). Our preliminary results showed appreciable differences in platelet and white cell content of PC prepared by various types of apheresis equipment. Appreciable differences in the quality of stored PC were also observed between routine PC (non-leuco-poor and buffy coat and apheresed PC (leuco-poor).

Opportunities for Palliative Care in Public Health.

PubMed

De Lima, Liliana; Pastrana, Tania

2016-01-01

In May 2014, the World Health Assembly, of the World Health Organization (WHO), unanimously adopted a palliative care (PC) resolution, which outlines clear recommendations to the United Nations member states, such as including PC in national health policies and in the undergraduate curricula for health care professionals, and highlights the critical need for countries to ensure that there is an adequate supply of essential PC medicines, especially those needed to alleviate pain. This resolution also carries great challenges: Every year over 20 million patients (of which 6% are children) need PC at the end of life (EOL). However, in 2011, approximately three million patients received PC, and only one in ten people in need is currently receiving it. We describe this public health situation and systems failure, the history and evolution of PC, and the components of the WHO public health model. We propose a role for public health for PC integration in community settings to advance PC and relieve suffering in the world.

Research based on the SoPC platform of feature-based image registration

NASA Astrophysics Data System (ADS)

Shi, Yue-dong; Wang, Zhi-hui

2015-12-01

This paper focuses on the study of implementing feature-based image registration by System on a Programmable Chip (SoPC) hardware platform. We solidify the image registration algorithm on the FPGA chip, in which embedded soft core processor Nios II can speed up the image processing system. In this way, we can make image registration technology get rid of the PC. And, consequently, this kind of technology will be got an extensive use. The experiment result indicates that our system shows stable performance, particularly in terms of matching processing which noise immunity is good. And feature points of images show a reasonable distribution.

Catalog of earthquake hypocenters at Redoubt Volcano and Mt. Spurr, Alaska: October 12, 1989 - December 31, 1990

USGS Publications Warehouse

Power, John A.; March, Gail D.; Lahr, John C.; Jolly, Arthur D.; Cruse, Gina R.

1993-01-01

Following a 23 year period of quiescence, Redoubt Volcano erupted between December 14,1989 and April 21,1990. The eruption was accompanied by thousands of earthquakes (Alaska Volcano Observatory Staff, 1990). Throughout the eruption sequence, data from the PC/AT system provided the primary means of determining earthquake hypocenters. This report catalogs the earthquake hypocenters and magnitudes calculated from data collected between October 12, 1989 and December 31, 1990 on the PC/AT acquisition system, provides station locations, statistics, and calibrations, and outlines which stations were recorded and used in triggering the PC/AT system.

The USL NASA PC R and D project: Detailed specifications of objects

NASA Technical Reports Server (NTRS)

Dominick, Wayne D. (Editor); Chum, Frank Y.; Hall, Philip P.; Moreau, Dennis R.; Triantafyllopoulos, Spiros

1984-01-01

The specifications for a number of projects which are to be implemented within the University of Southwestern Louisiana NASA PC R and D Project are discussed. The goals and objectives of the PC development project and the interrelationships of the various components are discussed. Six projects are described. They are a NASA/RECON simulator, a user interface to multiple remote information systems, evaluation of various personal computer systems, statistical analysis software development, interactive presentation system development, and the development of a distributed processing environment. The relationships of these projects to one another and to the goals and objectives of the overall project are discussed.

Processes in construction of failure management expert systems from device design information

NASA Technical Reports Server (NTRS)

Malin, Jane T.; Lance, Nick

1987-01-01

This paper analyzes the tasks and problem solving methods used by an engineer in constructing a failure management expert system from design information about the device to te diagnosed. An expert test engineer developed a trouble-shooting expert system based on device design information and experience with similar devices, rather than on specific expert knowledge gained from operating the device or troubleshooting its failures. The construction of the expert system was intensively observed and analyzed. This paper characterizes the knowledge, tasks, methods, and design decisions involved in constructing this type of expert system, and makes recommendations concerning tools for aiding and automating construction of such systems.

Singular value decomposition for photon-processing nuclear imaging systems and applications for reconstruction and computing null functions.

PubMed

Jha, Abhinav K; Barrett, Harrison H; Frey, Eric C; Clarkson, Eric; Caucci, Luca; Kupinski, Matthew A

2015-09-21

Recent advances in technology are enabling a new class of nuclear imaging systems consisting of detectors that use real-time maximum-likelihood (ML) methods to estimate the interaction position, deposited energy, and other attributes of each photon-interaction event and store these attributes in a list format. This class of systems, which we refer to as photon-processing (PP) nuclear imaging systems, can be described by a fundamentally different mathematical imaging operator that allows processing of the continuous-valued photon attributes on a per-photon basis. Unlike conventional photon-counting (PC) systems that bin the data into images, PP systems do not have any binning-related information loss. Mathematically, while PC systems have an infinite-dimensional null space due to dimensionality considerations, PP systems do not necessarily suffer from this issue. Therefore, PP systems have the potential to provide improved performance in comparison to PC systems. To study these advantages, we propose a framework to perform the singular-value decomposition (SVD) of the PP imaging operator. We use this framework to perform the SVD of operators that describe a general two-dimensional (2D) planar linear shift-invariant (LSIV) PP system and a hypothetical continuously rotating 2D single-photon emission computed tomography (SPECT) PP system. We then discuss two applications of the SVD framework. The first application is to decompose the object being imaged by the PP imaging system into measurement and null components. We compare these components to the measurement and null components obtained with PC systems. In the process, we also present a procedure to compute the null functions for a PC system. The second application is designing analytical reconstruction algorithms for PP systems. The proposed analytical approach exploits the fact that PP systems acquire data in a continuous domain to estimate a continuous object function. The approach is parallelizable and implemented for graphics processing units (GPUs). Further, this approach leverages another important advantage of PP systems, namely the possibility to perform photon-by-photon real-time reconstruction. We demonstrate the application of the approach to perform reconstruction in a simulated 2D SPECT system. The results help to validate and demonstrate the utility of the proposed method and show that PP systems can help overcome the aliasing artifacts that are otherwise intrinsically present in PC systems.

Singular value decomposition for photon-processing nuclear imaging systems and applications for reconstruction and computing null functions

NASA Astrophysics Data System (ADS)

Jha, Abhinav K.; Barrett, Harrison H.; Frey, Eric C.; Clarkson, Eric; Caucci, Luca; Kupinski, Matthew A.

2015-09-01

Recent advances in technology are enabling a new class of nuclear imaging systems consisting of detectors that use real-time maximum-likelihood (ML) methods to estimate the interaction position, deposited energy, and other attributes of each photon-interaction event and store these attributes in a list format. This class of systems, which we refer to as photon-processing (PP) nuclear imaging systems, can be described by a fundamentally different mathematical imaging operator that allows processing of the continuous-valued photon attributes on a per-photon basis. Unlike conventional photon-counting (PC) systems that bin the data into images, PP systems do not have any binning-related information loss. Mathematically, while PC systems have an infinite-dimensional null space due to dimensionality considerations, PP systems do not necessarily suffer from this issue. Therefore, PP systems have the potential to provide improved performance in comparison to PC systems. To study these advantages, we propose a framework to perform the singular-value decomposition (SVD) of the PP imaging operator. We use this framework to perform the SVD of operators that describe a general two-dimensional (2D) planar linear shift-invariant (LSIV) PP system and a hypothetical continuously rotating 2D single-photon emission computed tomography (SPECT) PP system. We then discuss two applications of the SVD framework. The first application is to decompose the object being imaged by the PP imaging system into measurement and null components. We compare these components to the measurement and null components obtained with PC systems. In the process, we also present a procedure to compute the null functions for a PC system. The second application is designing analytical reconstruction algorithms for PP systems. The proposed analytical approach exploits the fact that PP systems acquire data in a continuous domain to estimate a continuous object function. The approach is parallelizable and implemented for graphics processing units (GPUs). Further, this approach leverages another important advantage of PP systems, namely the possibility to perform photon-by-photon real-time reconstruction. We demonstrate the application of the approach to perform reconstruction in a simulated 2D SPECT system. The results help to validate and demonstrate the utility of the proposed method and show that PP systems can help overcome the aliasing artifacts that are otherwise intrinsically present in PC systems.

Testing expert systems

NASA Technical Reports Server (NTRS)

Chang, C. L.; Stachowitz, R. A.

1988-01-01

Software quality is of primary concern in all large-scale expert system development efforts. Building appropriate validation and test tools for ensuring software reliability of expert systems is therefore required. The Expert Systems Validation Associate (EVA) is a validation system under development at the Lockheed Artificial Intelligence Center. EVA provides a wide range of validation and test tools to check correctness, consistency, and completeness of an expert system. Testing a major function of EVA. It means executing an expert system with test cases with the intent of finding errors. In this paper, we describe many different types of testing such as function-based testing, structure-based testing, and data-based testing. We describe how appropriate test cases may be selected in order to perform good and thorough testing of an expert system.

Real Time Data System (RTDS)

NASA Technical Reports Server (NTRS)

Muratore, John F.

1991-01-01

Lessons learned from operational real time expert systems are examined. The basic system architecture is discussed. An expert system is any software that performs tasks to a standard that would normally require a human expert. An expert system implies knowledge contained in data rather than code. And an expert system implies the use of heuristics as well as algorithms. The 15 top lessons learned by the operation of a real time data system are presented.

USL/DBMS NASA/PC R and D project system testing standards

NASA Technical Reports Server (NTRS)

Dominick, Wayne D. (Editor); Kavi, Srinu; Moreau, Dennis R.; Yan, Lin

1984-01-01

A set of system testing standards to be used in the development of all C software within the NASA/PC Research and Development Project is established. Testing will be considered in two phases: the program testing phase and the system testing phase. The objective of these standards is to provide guidelines for the planning and conduct of program and software system testing.

PrPC expression and prion seeding activity in the alimentary tract and lymphoid tissue of deer

PubMed Central

Davenport, Kristen A.; Hoover, Clare E.; Bian, Jifeng; Telling, Glenn C.; Mathiason, Candace K.; Hoover, Edward A.

2017-01-01

The agent responsible for prion diseases is a misfolded form of a normal protein (PrPC). The prion hypothesis stipulates that PrPC must be present for the disease to manifest. Cervid populations across the world are infected with chronic wasting disease, a horizontally-transmissible prion disease that is likely spread via oral exposure to infectious prions (PrPCWD). Though PrPCWD has been identified in many tissues, there has been little effort to characterize the overall PrPC expression in cervids and its relationship to PrPCWD accumulation. We used immunohistochemistry (IHC), western blot and enzyme-linked immunosorbent assay to describe PrPC expression in naïve white-tailed deer. We used real-time, quaking-induced conversion (RT-QuIC) to detect prion seeding activity in CWD-infected deer. We assessed tissues comprising the alimentary tract, alimentary-associated lymphoid tissue and systemic lymphoid tissue from 5 naïve deer. PrPC was expressed in all tissues, though expression was often very low compared to the level in the CNS. IHC identified specific cell types wherein PrPC expression is very high. To compare the distribution of PrPC to PrPCWD, we examined 5 deer with advanced CWD infection. Using RT-QuIC, we detected prion seeding activity in all 21 tissues. In 3 subclinical deer sacrificed 4 months post-inoculation, we detected PrPCWD consistently in alimentary-associated lymphoid tissue, irregularly in alimentary tract tissues, and not at all in the brain. Contrary to our hypothesis that PrPC levels dictate prion accumulation, PrPC expression was higher in the lower gastrointestinal tissues than in the alimentary-associated lymphoid system and was higher in salivary glands than in the oropharyngeal lymphoid tissue. These data suggest that PrPC expression is not the sole driver of prion accumulation and that alimentary tract tissues accumulate prions before centrifugal spread from the brain occurs. PMID:28880938

Expert systems applications for space shuttle payload integration automation

NASA Technical Reports Server (NTRS)

Morris, Keith

1988-01-01

Expert systems technologies have been and are continuing to be applied to NASA's Space Shuttle orbiter payload integration problems to provide a level of automation previously unrealizable. NASA's Space Shuttle orbiter was designed to be extremely flexible in its ability to accommodate many different types and combinations of satellites and experiments (payloads) within its payload bay. This flexibility results in differnet and unique engineering resource requirements for each of its payloads, creating recurring payload and cargo integration problems. Expert systems provide a successful solution for these recurring problems. The Orbiter Payload Bay Cabling Expert (EXCABL) was the first expert system, developed to solve the electrical services provisioning problem. A second expert system, EXMATCH, was developed to generate a list of the reusable installation drawings available for each EXCABL solution. These successes have proved the applicability of expert systems technologies to payload integration problems and consequently a third expert system is currently in work. These three expert systems, the manner in which they resolve payload problems and how they will be integrated are described.

The Design of PC/MISI, a PC-Based Common User Interface to Remote Information Storage and Retrieval Systems. M.S. ThesisFinal Report, 1 Jul. 1985 - 31 Dec. 1987

NASA Technical Reports Server (NTRS)

Dominick, Wayne D. (Editor); Hall, Philip P.

1985-01-01

The amount of information contained in the data bases of large-scale information storage and retrieval systems is very large and growing at a rapid rate. The methods available for assessing this information have not been successful in making the information easily available to the people who have the greatest need for it. This thesis describes the design of a personal computer based system which will provide a means for these individuals to retrieve this data through one standardized interface. The thesis identifies each of the major problems associated with providing access to casual users of IS and R systems and describes the manner in which these problems are to be solved by the utilization of the local processing power of a PC. Additional capabilities, not available with standard access methods, are also provided to improve the user's ability to make use of this information. The design of PC/MISI is intended to facilitate its use as a research vehicle. Evaluation mechanisms and possible areas of future research are described. The PC/MISI development effort is part of a larger research effort directed at improving access to remote IS and R systems. This research effort, supported in part by NASA, is also reviewed.

Expert system technology

NASA Technical Reports Server (NTRS)

Prince, Mary Ellen

1987-01-01

The expert system is a computer program which attempts to reproduce the problem-solving behavior of an expert, who is able to view problems from a broad perspective and arrive at conclusions rapidly, using intuition, shortcuts, and analogies to previous situations. Expert systems are a departure from the usual artificial intelligence approach to problem solving. Researchers have traditionally tried to develop general modes of human intelligence that could be applied to many different situations. Expert systems, on the other hand, tend to rely on large quantities of domain specific knowledge, much of it heuristic. The reasoning component of the system is relatively simple and straightforward. For this reason, expert systems are often called knowledge based systems. The report expands on the foregoing. Section 1 discusses the architecture of a typical expert system. Section 2 deals with the characteristics that make a problem a suitable candidate for expert system solution. Section 3 surveys current technology, describing some of the software aids available for expert system development. Section 4 discusses the limitations of the latter. The concluding section makes predictions of future trends.

Expert system for the design of heating, ventilating, and air-conditioning systems. Master's thesis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Camejo, P.J.

1989-12-01

Expert systems are computer programs that seek to mimic human reason. An expert system shelf, a software program commonly used for developing expert systems in a relatively short time, was used to develop a prototypical expert system for the design of heating, ventilating, and air-conditioning (HVAC) systems in buildings. Because HVAC design involves several related knowledge domains, developing an expert system for HVAC design requires the integration of several smaller expert systems known as knowledge bases. A menu program and several auxiliary programs for gathering data, completing calculations, printing project reports, and passing data between the knowledge bases are neededmore » and have been developed to join the separate knowledge bases into one simple-to-use program unit.« less

Prenatal Cocaine Disrupts Serotonin Signaling-Dependent Behaviors: Implications for Sex Differences, Early Stress and Prenatal SSRI Exposure

PubMed Central

Williams, Sarah K; Lauder, Jean M; Johns, Josephine M

2011-01-01

Prenatal cocaine (PC) exposure negatively impacts the developing nervous system, including numerous changes in serotonergic signaling. Cocaine, a competitive antagonist of the serotonin transporter, similar to selective serotonin reuptake inhibitors (SSRIs), also blocks dopamine and norepinephrine transporters, leaving the direct mechanism through which cocaine disrupts the developing serotonin system unclear. In order to understand the role of the serotonin transporter in cocaine’s effect on the serotonergic system, we compare reports concerning PC and prenatal antidepressant exposure and conclude that PC exposure affects many facets of serotonergic signaling (serotonin levels, receptors, transporters) and that these effects differ significantly from what is observed following prenatal SSRI exposure. Alterations in serotonergic signaling are dependent on timing of exposure, test regimens, and sex. Following PC exposure, behavioral disturbances are observed in attention, emotional behavior and stress response, aggression, social behavior, communication, and like changes in serotonergic signaling, these effects depend on sex, age and developmental exposure. Vulnerability to the effects of PC exposure can be mediated by several factors, including allelic variance in serotonergic signaling genes, being male (although fewer studies have investigated female offspring), and experiencing the adverse early environments that are commonly coincident with maternal drug use. Early environmental stress results in disruptions in serotonergic signaling analogous to those observed with PC exposure and these may interact to produce greater behavioral effects observed in children of drug-abusing mothers. We conclude that based on past evidence, future studies should put a greater emphasis on including females and monitoring environmental factors when studying the impact of PC exposure. PMID:22379462

Embedded object concept: case balancing two-wheeled robot

NASA Astrophysics Data System (ADS)

Vallius, Tero; Röning, Juha

2007-09-01

This paper presents the Embedded Object Concept (EOC) and a telepresence robot system which is a test case for the EOC. The EOC utilizes common object-oriented methods used in software by applying them to combined Lego-like software-hardware entities. These entities represent objects in object-oriented design methods, and they are the building blocks of embedded systems. The goal of the EOC is to make the designing of embedded systems faster and easier. This concept enables people without comprehensive knowledge in electronics design to create new embedded systems, and for experts it shortens the design time of new embedded systems. We present the current status of a telepresence robot created with Atomi-objects, which is the name for our implementation of the embedded objects. The telepresence robot is a relatively complex test case for the EOC. The robot has been constructed using incremental device development, which is made possible by the architecture of the EOC. The robot contains video and audio exchange capability and a controlling system for driving with two wheels. The robot consists of Atomi-objects, demonstrating the suitability of the EOC for prototyping and easy modifications, and proving the capabilities of the EOC by realizing a function that normally requires a computer. The computer counterpart is a regular PC with audio and video capabilities running with a robot control application. The robot is functional and successfully tested.

Engineering monitoring expert system's developer

NASA Technical Reports Server (NTRS)

Lo, Ching F.

1991-01-01

This research project is designed to apply artificial intelligence technology including expert systems, dynamic interface of neural networks, and hypertext to construct an expert system developer. The developer environment is specifically suited to building expert systems which monitor the performance of ground support equipment for propulsion systems and testing facilities. The expert system developer, through the use of a graphics interface and a rule network, will be transparent to the user during rule constructing and data scanning of the knowledge base. The project will result in a software system that allows its user to build specific monitoring type expert systems which monitor various equipments used for propulsion systems or ground testing facilities and accrues system performance information in a dynamic knowledge base.

Expert systems built by the Expert: An evaluation of OPS5

NASA Technical Reports Server (NTRS)

Jackson, Robert

1987-01-01

Two expert systems were written in OPS5 by the expert, a Ph.D. astronomer with no prior experience in artificial intelligence or expert systems, without the use of a knowledge engineer. The first system was built from scratch and uses 146 rules to check for duplication of scientific information within a pool of prospective observations. The second system was grafted onto another expert system and uses 149 additional rules to estimate the spacecraft and ground resources consumed by a set of prospective observations. The small vocabulary, the IF this occurs THEN do that logical structure of OPS5, and the ability to follow program execution allowed the expert to design and implement these systems with only the data structures and rules of another OPS5 system as an example. The modularity of the rules in OPS5 allowed the second system to modify the rulebase of the system onto which it was grafted without changing the code or the operation of that system. These experiences show that experts are able to develop their own expert systems due to the ease of programming and code reusability in OPS5.

Artificial intelligence and space power systems automation

NASA Technical Reports Server (NTRS)

Weeks, David J.

1987-01-01

Various applications of artificial intelligence to space electrical power systems are discussed. An overview is given of completed, on-going, and planned knowledge-based system activities. These applications include the Nickel-Cadmium Battery Expert System (NICBES) (the expert system interfaced with the Hubble Space Telescope electrical power system test bed); the early work with the Space Station Experiment Scheduler (SSES); the three expert systems under development in the space station advanced development effort in the core module power management and distribution system test bed; planned cooperation of expert systems in the Core Module Power Management and Distribution (CM/PMAD) system breadboard with expert systems for the space station at other research centers; and the intelligent data reduction expert system under development.

Acyl-chain remodeling of dioctanoyl-phosphatidylcholine in Saccharomyces cerevisiae mutant defective in de novo and salvage phosphatidylcholine synthesis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kishino, Hideyuki; Eguchi, Hiroki; Takagi, Keiko

2014-03-07

Highlights: • Dioctanoyl-PC (diC8PC) supported growth of a yeast mutant defective in PC synthesis. • diC8PC was converted to PC species containing longer acyl residues in the mutant. • Both acyl residues of diC8PC were replaced by longer fatty acids in vitro. • This system will contribute to the elucidation of the acyl chain remodeling of PC. - Abstract: A yeast strain, in which endogenous phosphatidylcholine (PC) synthesis is controllable, was constructed by the replacement of the promoter of PCT1, encoding CTP:phosphocholine cytidylyltransferase, with GAL1 promoter in a double deletion mutant of PEM1 and PEM2, encoding phosphatidylethanolamine methyltransferase and phospholipidmore » methyltransferase, respectively. This mutant did not grow in the glucose-containing medium, but the addition of dioctanoyl-phosphatidylcholine (diC8PC) supported its growth. Analyses of the metabolism of {sup 13}C-labeled diC8PC ((methyl-{sup 13}C){sub 3}-diC8PC) in this strain using electrospray ionization tandem mass spectrometry revealed that it was converted to PC species containing acyl residues of 16 or 18 carbons at both sn-1 and sn-2 positions. In addition, both acyl residues of (methyl-{sup 13}C){sub 3}-diC8PC were replaced with 16:1 acyl chains in the in vitro reaction using the yeast cell extract in the presence of palmitoleoyl-CoA. These results indicate that PC containing short acyl residues was remodeled to those with acyl chains of physiological length in yeast.« less

Incremental cost-effectiveness of percutaneous versus surgical closure of atrial septal defects in children under a public health system perspective in Brazil.

PubMed

Costa, Rodrigo; Pedra, Carlos A C; Ribeiro, Marcelo; Pedra, Simone; Ferreira-Da-Silva, André Luis; Polanczyk, Carisi; Berwanger, Otávio; Biasi, Alexandre; Ribeiro, Rodrigo

2014-11-01

Cost-effectiveness (CE) studies of percutaneous (PC) versus surgical (SC) atrial septal defect closure are lacking. A systematic literature review in children and a CE analysis based on a model of long-term outcomes were performed. Direct costs of PC and SC were US$8700 (defined arbitrarily) and US$5700 (actually paid), respectively. Three-times the Brazilian GDI (US$28,700) per year of life saved (with a discount rate of 5%) was used as a limit for willingness-to-pay. PC had a high (US$104,500) incremental CE ratio despite lower complication rates, shorter hospital stay and better (nonsignificant) adjusted life expectancy. PC would be cost-effective if it cost US$6400 or SC had an 8% loss of utility or its indirect costs were US$2250. Costs of PC should be reduced to be cost-effective in the Brazilian public health system. Indirect costs and impact on quality of life should be further assessed.

Information security requirements in patient-centred healthcare support systems.

PubMed

Alsalamah, Shada; Gray, W Alex; Hilton, Jeremy; Alsalamah, Hessah

2013-01-01

Enabling Patient-Centred (PC) care in modern healthcare requires the flow of medical information with the patient between different healthcare providers as they follow the patient's treatment plan. However, PC care threatens the stability of the balance of information security in the support systems since legacy systems fall short of attaining a security balance when sharing their information due to compromises made between its availability, integrity, and confidentiality. Results show that the main reason for this is that information security implementation in discrete legacy systems focused mainly on information confidentiality and integrity leaving availability a challenge in collaboration. Through an empirical study using domain analysis, observations, and interviews, this paper identifies a need for six information security requirements in legacy systems to cope with this situation in order to attain the security balance in systems supporting PC care implementation in modern healthcare.

Considerations in development of expert systems for real-time space applications

NASA Technical Reports Server (NTRS)

Murugesan, S.

1988-01-01

Over the years, demand on space systems has increased tremendously and this trend will continue for the near future. Enhanced capabilities of space systems, however, can only be met with increased complexity and sophistication of onboard and ground systems. Artificial Intelligence and expert system techniques have great potential in space applications. Expert systems could facilitate autonomous decision making, improve in-orbit fault diagnosis and repair, enhance performance and reduce reliance on ground support. However, real-time expert systems, unlike conventional off-line consultative systems, have to satisfy certain special stringent requirements before they could be used for onboard space applications. Challenging and interesting new environments are faced while developing expert system space applications. This paper discusses the special characteristics, requirements and typical life cycle issues for onboard expert systems. Further, it also describes considerations in design, development, and implementation which are particularly important to real-time expert systems for space applications.

Immunological dysregulation in multiple myeloma microenvironment.

PubMed

Romano, Alessandra; Conticello, Concetta; Cavalli, Maide; Vetro, Calogero; La Fauci, Alessia; Parrinello, Nunziatina Laura; Di Raimondo, Francesco

2014-01-01

Multiple Myeloma (MM) is a systemic hematologic disease due to uncontrolled proliferation of monoclonal plasma cells (PC) in bone marrow (BM). Emerging in other solid and liquid cancers, the host immune system and the microenvironment have a pivotal role for PC growth, proliferation, survival, migration, and resistance to drugs and are responsible for some clinical manifestations of MM. In MM, microenvironment is represented by the cellular component of a normal bone marrow together with extracellular matrix proteins, adhesion molecules, cytokines, and growth factors produced by both stromal cells and PC themselves. All these components are able to protect PC from cytotoxic effect of chemo- and radiotherapy. This review is focused on the role of immunome to sustain MM progression, the emerging role of myeloid derived suppressor cells, and their potential clinical implications as novel therapeutic target.

Organic photovoltaic cells based on unconventional electron donor fullerene and electron acceptor copper hexadecafluorophthalocyanine

NASA Astrophysics Data System (ADS)

Yang, J. L.; Sullivan, P.; Schumann, S.; Hancox, I.; Jones, T. S.

2012-01-01

We demonstrate organic discrete heterojunction photovoltaic cells based on fullerene (C60) and copper hexadecafluorophthalocyanine (F16CuPc), in which the C60 and F16CuPc act as the electron donor and the electron acceptor, respectively. The C60/F16CuPc cells fabricated with conventional and inverted architectures both exhibit comparable power conversion efficiencies. Furthermore, we show that the photocurrent in both cells is generated by a conventional exciton dissociation mechanism rather than the exciton recombination mechanism recently proposed for a similar C60/F16ZnPc system [Song et al., J. Am. Chem. Soc. 132, 4554 (2010)]. These results demonstrate that new unconventional material systems are a potential way to fabricate organic photovoltaic cells with inverted as well as conventional architectures.

VENTURE/PC manual: A multidimensional multigroup neutron diffusion code system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shapiro, A.; Huria, H.C.; Cho, K.W.

1991-12-01

VENTURE/PC is a recompilation of part of the Oak Ridge BOLD VENTURE code system, which will operate on an IBM PC or compatible computer. Neutron diffusion theory solutions are obtained for multidimensional, multigroup problems. This manual contains information associated with operating the code system. The purpose of the various modules used in the code system, and the input for these modules are discussed. The PC code structure is also given. Version 2 included several enhancements not given in the original version of the code. In particular, flux iterations can be done in core rather than by reading and writing tomore » disk, for problems which allow sufficient memory for such in-core iterations. This speeds up the iteration process. Version 3 does not include any of the special processors used in the previous versions. These special processors utilized formatted input for various elements of the code system. All such input data is now entered through the Input Processor, which produces standard interface files for the various modules in the code system. In addition, a Standard Interface File Handbook is included in the documentation which is distributed with the code, to assist in developing the input for the Input Processor.« less

Real-time multi-target ranging based on chaotic polarization laser radars in the drive-response VCSELs.

PubMed

Zhong, Dongzhou; Xu, Geliang; Luo, Wei; Xiao, Zhenzhen

2017-09-04

According to the principle of complete chaos synchronization and the theory of Hilbert phase transformation, we propose a novel real-time multi-target ranging scheme by using chaotic polarization laser radar in the drive-response vertical-cavity surface-emitting lasers (VCSELs). In the scheme, to ensure each polarization component (PC) of the master VCSEL (MVCSEL) to be synchronized steadily with that of the slave VCSEL, the output x-PC and y-PC from the MVCSEL in the drive system and those in the response system are modulated by the linear electro-optic effect simultaneously. Under this condition, by simulating the influences of some key parameters of the system on the synchronization quality and the relative errors of the two-target ranging, related operating parameters can be optimized. The x-PC and the y-PC, as two chaotic radar sources, are used to implement the real-time ranging for two targets. It is found that the measured distances of the two targets at arbitrary position exhibit strong real-time stability and only slight jitter. Their resolutions are up to millimeters, and their relative errors are very small and less than 2.7%.

Therapeutic approaches for portal biliopathy: A systematic review

PubMed Central

Franceschet, Irene; Zanetto, Alberto; Ferrarese, Alberto; Burra, Patrizia; Senzolo, Marco

2016-01-01

Portal biliopathy (PB) is defined as the presence of biliary abnormalities in patients with non-cirrhotic/non-neoplastic extrahepatic portal vein obstruction (EHPVO) and portal cavernoma (PC). The pathogenesis of PB is due to ab extrinseco compression of bile ducts by PC and/or to ischemic damage secondary to an altered biliary vascularization in EHPVO and PC. Although asymptomatic biliary abnormalities can be frequently seen by magnetic resonance cholangiopancreatography in patients with PC (77%-100%), only a part of these (5%-38%) are symptomatic. Clinical presentation includes jaundice, cholangitis, cholecystitis, abdominal pain, and cholelithiasis. In this subset of patients is required a specific treatment. Different therapeutic approaches aimed to diminish portal hypertension and treat biliary strictures are available. In order to decompress PC, surgical porto-systemic shunt or transjugular intrahepatic porto-systemic shunt can be performed, and treatment on the biliary stenosis includes endoscopic (Endoscopic retrograde cholangiopancreatography with endoscopic sphincterotomy, balloon dilation, stone extraction, stent placement) and surgical (bilioenteric anastomosis, cholecystectomy) approaches. Definitive treatment of PB often requires multiple and combined interventions both on vascular and biliary system. Liver transplantation can be considered in patients with secondary biliary cirrhosis, recurrent cholangitis or unsuccessful control of portal hypertension. PMID:28018098

An Evaluation of Alternative Delivery Modes for Information Services.

ERIC Educational Resources Information Center

Short, Craig; Christal, Melodie E.

The use of the floppy disk as an alternative mode for delivering Information Services reports was evaluated for fiscal year 1985 by the National Center for Higher Education Management Systems (NCHEMS). A 5.25 inch, 8/9 sector, 40 track ASCII floppy disk used under PC-DOS on the IBM PC and IBM PC compatible hardware was tested. Tabular data but not…

Relation of carotid plaque with natural IgM antibodies in patients with systemic lupus erythematosus.

PubMed

Grönwall, Caroline; Reynolds, Harmony; Kim, June K; Buyon, Jill; Goldberg, Judith D; Clancy, Robert M; Silverman, Gregg J

2014-07-01

Noninvasive carotid measurements have proven value in the estimation of future cardiovascular (CV) outcomes in systemic lupus erythematosus (SLE). Natural IgM-antibodies to phosphorylcholine (PC) epitopes can enhance apoptotic-cell clearance and induce anti-inflammatory pathways. Herein, we show that subclinical CV disease, as detected by carotid ultrasound, in a cross-sectional SLE cohort was associated with lower levels of IgM anti-PC, as well as lower levels of the ratio of IgM anti-PC/total IgM, compared to patients without plaque (p=0.004 and p=0.02, respectively). The IgM anti-PC/total IgM association remained significant after adjusting for age, cholesterol and hypertension. Adiponectin and sE-selectin were significantly elevated in patients with plaque, and statistical models showed that combining adiponectin, sE-selectin and IgM anti-PC/total IgM was better for predicting plaque than either test alone. These results support the hypothesis that IgM-natural autoantibodies may inhibit atherogenesis, and confirm the utility of IgM anti-PC levels as a biomarker for subclinical CV disease. Copyright © 2014 Elsevier Inc. All rights reserved.

Screen-Printed Carbon Electrodes Modified with Cobalt Phthalocyanine for Selective Sulfur Detection in Cosmetic Products

PubMed Central

Chen, Pei-Yen; Luo, Chin-Hsiang; Chen, Mei-Chin; Tsai, Feng-Jie; Chang, Nai-Fang; Shih, Ying

2011-01-01

Cobalt phthalocyanine (CoPc) films were deposited on the surface of a screen-printed carbon electrode using a simple drop coating method. The cyclic voltammogram of the resulting CoPc modified screen-printed electrode (CoPc/SPE) prepared under optimum conditions shows a well-behaved redox couple due to the (CoI/CoII) system. The CoPc/SPE surface demonstrates excellent electrochemical activity towards the oxidation of sulfur in a 0.01 mol·L−1 NaOH. A linear calibration curve with the detection limit (DL, S/N = 3) of 0.325 mg·L−1 was achieved by CoPc/SPE coupled with flow injection analysis of the sulfur concentration ranging from 4 to 1120 mg·L−1. The precision of the system response was evaluated (3.60% and 3.52% RSD for 12 repeated injections), in the range of 64 and 480 mg·L−1 sulfur. The applicability of the method was successfully demonstrated in a real sample analysis of sulfur in anti-acne creams, and good recovery was obtained. The CoPc/SPE displayed several advantages in sulfur determination including easy fabrication, high stability, and low cost. PMID:21747708

Evaluating the safety and dosing of drugs in patients with liver cirrhosis by literature review and expert opinion

PubMed Central

Weersink, Rianne A; Bouma, Margriet; Burger, David M; Drenth, Joost P H; Hunfeld, Nicole G M; Kranenborg, Minke; Monster-Simons, Margje H; van Putten, Sandra A W; Metselaar, Herold J; Taxis, Katja; Borgsteede, Sander D

2016-01-01

Introduction Liver cirrhosis can have a major impact on drug pharmacokinetics and pharmacodynamics. Patients with cirrhosis often suffer from potentially preventable adverse drug reactions. Guidelines on safe prescribing for these patients are lacking. The aim of this study is to develop a systematic method for evaluating the safety and optimal dosage of drugs in patients with liver cirrhosis. Methods and analysis For each drug, a six-step evaluation process will be followed. (1) Available evidence on the pharmacokinetics and safety of a drug in patients with liver cirrhosis will be collected from the Summary of Product Characteristics (SmPC) and a systematic literature review will be performed. (2) Data regarding two outcomes, namely pharmacokinetics and safety, will be extracted and presented in a standardised assessment report. (3) A safety classification and dosage suggestion will be proposed for each drug. (4) An expert panel will discuss the validity and clinical relevance of this suggested advice. (5) Advices will be implemented in all relevant Clinical Decision Support Systems in the Netherlands and published on a website for patients and healthcare professionals. (6) The continuity of the advices will be guaranteed by a yearly check of new literature and comments on the advices. This protocol will be applied in the evaluation of a selection of drugs: (A) drugs used to treat (complications of) liver cirrhosis, and (B) drugs frequently prescribed to the general population. Ethics and dissemination Since this study does not directly involve human participants, it does not require ethical clearance. Besides implementation on a website and in clinical decision support systems, we aim to publish the generated advices of one or two drug classes in a peer-reviewed journal and at conference meetings. PMID:27733414

An hierarchical approach to performance evaluation of expert systems

NASA Technical Reports Server (NTRS)

Dominick, Wayne D. (Editor); Kavi, Srinu

1985-01-01

The number and size of expert systems is growing rapidly. Formal evaluation of these systems - which is not performed for many systems - increases the acceptability by the user community and hence their success. Hierarchical evaluation that had been conducted for computer systems is applied for expert system performance evaluation. Expert systems are also evaluated by treating them as software systems (or programs). This paper reports many of the basic concepts and ideas in the Performance Evaluation of Expert Systems Study being conducted at the University of Southwestern Louisiana.

An engineering approach to the use of expert systems technology in avionics applications

NASA Technical Reports Server (NTRS)

Duke, E. L.; Regenie, V. A.; Brazee, M.; Brumbaugh, R. W.

1986-01-01

The concept of using a knowledge compiler to transform the knowledge base and inference mechanism of an expert system into a conventional program is presented. The need to accommodate real-time systems requirements in applications such as embedded avionics is outlined. Expert systems and a brief comparison of expert systems and conventional programs are reviewed. Avionics applications of expert systems are discussed before the discussions of applying the proposed concept to example systems using forward and backward chaining.

Expert systems for real-time monitoring and fault diagnosis

NASA Technical Reports Server (NTRS)

Edwards, S. J.; Caglayan, A. K.

1989-01-01

Methods for building real-time onboard expert systems were investigated, and the use of expert systems technology was demonstrated in improving the performance of current real-time onboard monitoring and fault diagnosis applications. The potential applications of the proposed research include an expert system environment allowing the integration of expert systems into conventional time-critical application solutions, a grammar for describing the discrete event behavior of monitoring and fault diagnosis systems, and their applications to new real-time hardware fault diagnosis and monitoring systems for aircraft.

Equating an expert system to a classifier in order to evaluate the expert system

NASA Technical Reports Server (NTRS)

Odell, Patrick L.

1989-01-01

A strategy to evaluate an expert system is formulated. The strategy proposed is based on finding an equivalent classifier to an expert system and evaluate that classifier with respect to an optimal classifier, a Bayes classifier. Here it is shown that for the rules considered an equivalent classifier exists. Also, a brief consideration of meta and meta-meta rules is included. Also, a taxonomy of expert systems is presented and an assertion made that an equivalent classifier exists for each type of expert system in the taxonomy with associated sets of underlying assumptions.

Development of the low-cost multi-channel analyzer system for γ-ray spectroscopy with a PC sound card

NASA Astrophysics Data System (ADS)

Sugihara, Kenkoh; Nakamura, Satoshi N.; Chiga, Nobuyuki; Fujii, Yuu; Tamura, Hirokazu

2013-10-01

A low-cost multi-channel analyzer (MCA) system was developed using a custom-build interface circuit and a PC sound card. The performance of the system was studied using γ-ray spectroscopy measurements with a NaI(Tl) scintillation detector. Our system successfully measured the energy of γ-rays at a rate of 1000 counts per second (cps).

PC/AT-based architecture for shared telerobotic control

NASA Astrophysics Data System (ADS)

Schinstock, Dale E.; Faddis, Terry N.; Barr, Bill G.

1993-03-01

A telerobotic control system must include teleoperational, shared, and autonomous modes of control in order to provide a robot platform for incorporating the rapid advances that are occurring in telerobotics and associated technologies. These modes along with the ability to modify the control algorithms are especially beneficial for telerobotic control systems used for research purposes. The paper describes an application of the PC/AT platform to the control system of a telerobotic test cell. The paper provides a discussion of the suitability of the PC/AT as a platform for a telerobotic control system. The discussion is based on the many factors affecting the choice of a computer platform for a real time control system. The factors include I/O capabilities, simplicity, popularity, computational performance, and communication with external systems. The paper also includes a description of the actuation, measurement, and sensor hardware of both the master manipulator and the slave robot. It also includes a description of the PC-Bus interface cards. These cards were developed by the researchers in the KAT Laboratory, specifically for interfacing to the master manipulator and slave robot. Finally, a few different versions of the low level telerobotic control software are presented. This software incorporates shared control by supervisory systems and the human operator and traded control between supervisory systems and the human operator.

Small Knowledge-Based Systems in Education and Training: Something New Under the Sun.

ERIC Educational Resources Information Center

Wilson, Brent G.; Welsh, Jack R.

1986-01-01

Discusses artificial intelligence, robotics, natural language processing, and expert or knowledge-based systems research; examines two large expert systems, MYCIN and XCON; and reviews the resources required to build large expert systems and affordable smaller systems (intelligent job aids) for training. Expert system vendors and products are…

The Third Replicon of Members of the Burkholderia cepacia Complex, Plasmid pC3, Plays a Role in Stress Tolerance

PubMed Central

Agnoli, Kirsty; Frauenknecht, Carmen; Freitag, Roman; Schwager, Stephan; Jenul, Christian; Vergunst, Annette; Carlier, Aurelien

2014-01-01

The metabolically versatile Burkholderia cepacia complex (Bcc) occupies a variety of niches, including the plant rhizosphere and the cystic fibrosis lung (where it is often fatal to the patient). Bcc members have multipartite genomes, of which the third replicon, pC3 (previously chromosome 3), has been shown to be a nonessential megaplasmid which confers virulence and both antifungal and proteolytic activity on several strains. In this study, pC3 curing was extended to cover strains of 16 of the 17 members of the Bcc, and the phenotypes conferred by pC3 were determined. B. cenocepacia strains H111, MCO-3, and HI2424 were previously cured of pC3; however, this had not proved possible in the epidemic strain K56-2. Here, we investigated the mechanism of this unexpected stability and found that efficient toxin-antitoxin systems are responsible for maintaining pC3 of strain K56-2. Identification of these systems allowed neutralization of the toxins and the subsequent deletion of K56-2pC3. The cured strain was found to exhibit reduced antifungal activity and was attenuated in both the zebrafish and the Caenorhabditis elegans model of infection. We used a PCR screening method to examine the prevalence of pC3 within 110 Bcc isolates and found that this replicon was absent in only four cases, suggesting evolutionary fixation. It is shown that plasmid pC3 increases the resistance of B. cenocepacia H111 to various stresses (oxidative, osmotic, high-temperature, and chlorhexidine-induced stresses), explaining the prevalence of this replicon within the Bcc. PMID:24334662

The Form of Choline in the Maternal Diet Affects Immune Development in Suckled Rat Offspring.

PubMed

Lewis, Erin D; Richard, Caroline; Goruk, Susan; Dellschaft, Neele S; Curtis, Jonathan M; Jacobs, René L; Field, Catherine J

2016-04-01

Lipid-soluble phosphatidylcholine (PC) and aqueous free choline are absorbed and metabolized differently, but the metabolic effects of feeding these 2 forms of choline have not been thoroughly investigated. We sought to compare the effects of PC and free choline in the maternal diet on the development of the offspring's immune system. During lactation, Sprague-Dawley dams (n= 10) were randomly assigned to 1 of 2 diet groups containing the same concentration of total choline (1 g/kg diet) as free choline (choline bitartrate) or PC (egg lecithin). The splenocytes of pups aged 21 d were isolated and stimulated ex vivo with concanavalin A (ConA) or lipopolysaccharide (LPS), and the choline concentrations of stomach content, plasma, and the spleen were measured. Pups from PC-fed dams had a lower proportion of cells involved in antigen presentation but produced 54% more interleukin (IL)-2, 163% more IL-6, and 107% more IFN-γ after ConA stimulation and 110% more IL-6 and 43% more tumor necrosis factor (TNF)-α after LPS stimulation (allP< 0.05). The PC concentrations were significantly higher in the plasma and spleen of pups from PC-fed dams (P< 0.05). Increasing the supply of PC in the form of lysophosphatidylcholine to splenocytes in vitro increased the rate of proliferation and IL-2 production and the surface expression of CD25, CD28, CD71, and CD152 on CD8+ T cells, suggesting 1 possible mechanism. The results of this study demonstrate that providing choline to rats in the form of PC (compared to free choline), possibly by increasing the supply of PC to the suckling pups, promotes maturation and improves function of the offspring's immune system. © 2016 American Society for Nutrition.

Selection of Polynomial Chaos Bases via Bayesian Model Uncertainty Methods with Applications to Sparse Approximation of PDEs with Stochastic Inputs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Karagiannis, Georgios; Lin, Guang

2014-02-15

Generalized polynomial chaos (gPC) expansions allow the representation of the solution of a stochastic system as a series of polynomial terms. The number of gPC terms increases dramatically with the dimension of the random input variables. When the number of the gPC terms is larger than that of the available samples, a scenario that often occurs if the evaluations of the system are expensive, the evaluation of the gPC expansion can be inaccurate due to over-fitting. We propose a fully Bayesian approach that allows for global recovery of the stochastic solution, both in spacial and random domains, by coupling Bayesianmore » model uncertainty and regularization regression methods. It allows the evaluation of the PC coefficients on a grid of spacial points via (1) Bayesian model average or (2) medial probability model, and their construction as functions on the spacial domain via spline interpolation. The former accounts the model uncertainty and provides Bayes-optimal predictions; while the latter, additionally, provides a sparse representation of the solution by evaluating the expansion on a subset of dominating gPC bases when represented as a gPC expansion. Moreover, the method quantifies the importance of the gPC bases through inclusion probabilities. We design an MCMC sampler that evaluates all the unknown quantities without the need of ad-hoc techniques. The proposed method is suitable for, but not restricted to, problems whose stochastic solution is sparse at the stochastic level with respect to the gPC bases while the deterministic solver involved is expensive. We demonstrate the good performance of the proposed method and make comparisons with others on 1D, 14D and 40D in random space elliptic stochastic partial differential equations.« less

High fidelity computational characterization of the mechanical response of thermally aged polycarbonate

NASA Astrophysics Data System (ADS)

Zhang, Zesheng; Zhang, Lili; Jasa, John; Li, Wenlong; Gazonas, George; Negahban, Mehrdad

2017-07-01

A representative all-atom molecular dynamics (MD) system of polycarbonate (PC) is built and conditioned to capture and predict the behaviours of PC in response to a broad range of thermo-mechanical loadings for various thermal aging. The PC system is constructed to have a distribution of molecular weights comparable to a widely used commercial PC (LEXAN 9034), and thermally conditioned to produce models for aged and unaged PC. The MD responses of these models are evaluated through comparisons to existing experimental results carried out at much lower loading rates, but done over a broad range of temperatures and loading modes. These experiments include monotonic extension/compression/shear, unilaterally and bilaterally confined compression, and load-reversal during shear. It is shown that the MD simulations show both qualitative and quantitative similarity with the experimental response. The quantitative similarity is evaluated by comparing the dilatational response under bilaterally confined compression, the shear flow viscosity and the equivalent yield stress. The consistency of the in silico response to real laboratory experiments strongly suggests that the current PC models are physically and mechanically relevant and potentially can be used to investigate thermo-mechanical response to loading conditions that would not easily be possible. These MD models may provide valuable insight into the molecular sources of certain observations, and could possibly offer new perspectives on how to develop constitutive models that are based on better understanding the response of PC under complex loadings. To this latter end, the models are used to predict the response of PC to complex loading modes that would normally be difficult to do or that include characteristics that would be difficult to measure. These include the responses of unaged and aged PC to unilaterally confined extension/compression, cyclic uniaxial/shear loadings, and saw-tooth extension/compression/shear.

Expert systems for C3I. Volume 1. A user's introduction

NASA Astrophysics Data System (ADS)

Clapp, J. A.; Hockett, S. M.; Prelle, M. J.; Tallant, A. M.; Triant, D. D.

1985-10-01

There has been a tremendous burgeoning of interest in artificial intelligence (AI) over the last few years. Investments of commercial and government sponsors reflect a widespread belief that AI is now ready for practical applications. The area of AI currently receiving the greatest attention and investment is expert system technology. Most major high tech corporations have begun to develop expert systems, and many software houses specializing in expert system tools and applications have recently appeared. The defense community is one of the heaviest investors in expert system technology, and within this community one of the application areas receiving greatest attention is C3I. Many ESD programs are now beginning to ask whether expert system applications for C3I are ready for incorporation into ESD-developed systems, and, if so, what are the potential benefits and risks of doing so. This report was prepared to help ESD and MITRE personnel working on acquisition programs to address these issues and to gain a better understanding of what expert systems are all about. The primary intention of this report is to investigate what expert systems are and the advances that are being made in expert system technology for C3I applications. The report begins with a brief tutorial on expert systems, emphasizing how they differ from conventional software systems and what they are best at doing.

A design of real time image capturing and processing system using Texas Instrument's processor

NASA Astrophysics Data System (ADS)

Wee, Toon-Joo; Chaisorn, Lekha; Rahardja, Susanto; Gan, Woon-Seng

2007-09-01

In this work, we developed and implemented an image capturing and processing system that equipped with capability of capturing images from an input video in real time. The input video can be a video from a PC, video camcorder or DVD player. We developed two modes of operation in the system. In the first mode, an input image from the PC is processed on the processing board (development platform with a digital signal processor) and is displayed on the PC. In the second mode, current captured image from the video camcorder (or from DVD player) is processed on the board but is displayed on the LCD monitor. The major difference between our system and other existing conventional systems is that image-processing functions are performed on the board instead of the PC (so that the functions can be used for further developments on the board). The user can control the operations of the board through the Graphic User Interface (GUI) provided on the PC. In order to have a smooth image data transfer between the PC and the board, we employed Real Time Data Transfer (RTDX TM) technology to create a link between them. For image processing functions, we developed three main groups of function: (1) Point Processing; (2) Filtering and; (3) 'Others'. Point Processing includes rotation, negation and mirroring. Filter category provides median, adaptive, smooth and sharpen filtering in the time domain. In 'Others' category, auto-contrast adjustment, edge detection, segmentation and sepia color are provided, these functions either add effect on the image or enhance the image. We have developed and implemented our system using C/C# programming language on TMS320DM642 (or DM642) board from Texas Instruments (TI). The system was showcased in College of Engineering (CoE) exhibition 2006 at Nanyang Technological University (NTU) and have more than 40 users tried our system. It is demonstrated that our system is adequate for real time image capturing. Our system can be used or applied for applications such as medical imaging, video surveillance, etc.

Interfaces and Expert Systems for Online Retrieval.

ERIC Educational Resources Information Center

Kehoe, Cynthia A.

1985-01-01

This paper reviews the history of separate online system interfaces which led to efforts to develop expert systems for searching databases, particularly for end users, and introduces the research on such expert systems. Appended is a bibliography of sources on interfaces and expert systems for online retrieval. (Author/EJS)

Distribution and colocalization of cholecystokinin with the prohormone convertase enzymes PC1, PC2, and PC5 in rat brain.

PubMed

Cain, Brian M; Connolly, Kelly; Blum, Alissa; Vishnuvardhan, Daesety; Marchand, James E; Beinfeld, Margery C; Vishnuvardham, Daesety

2003-12-15

During posttranslational processing to generate CCK 8, pro-cholecystokinin (CCK) undergoes endoproteolytic cleavage at three sites. Several studies using endocrine and neuronal tumor cells in culture and recombinant enzymes and synthetic substrates in vitro have pointed to the subtilisin/kexin-like enzymes prohormone convertase (PC) 1, PC2, and PC5 as potential candidates for these endoproteolytic cleavages. In these experimental models, they all appear to be able to cleave pro-CCK to make the correct products. One rodent model has provided information about the role of PC2. PC2 knockout mouse brains had less CCK 8 than wild-type, although a substantial amount of CCK was still present. The degree to which CCK levels were reduced in these mice was regionally specific. These data indicated that PC2 is important for normal production of CCK but that it is not the only endoprotease that is involved in CCK processing. To evaluate whether PC1 and PC5 are possible candidates for the other enzymes involved in CCK processing, the distribution of PC1, PC2, and PC5 mRNA was studied in rat brain. Their colocalization with CCK mRNA was examined using double-label in situ hybridization. PC2 was the most abundant of these enzymes in terms of the intensity and number of cells labeled. It was widely colocalized with CCK. PC1 and PC5 mRNA-positive cells were less abundant, but they were also widely distributed and strongly colocalized with CCK in the cerebral cortex, hippocampus, amygdala, ventral tegmental area, and substantia nigra zona compacta. The degree of colocalization of the enzymes with CCK was regionally specific. It is clear that PC1 and PC5 are extensively colocalized with CCK and could be participating in CCK processing in the rat brain and may be able to substitute for PC2 in its absence. These three enzymes may represent a redundant system to ensure production of biologically active CCK. Copyright 2003 Wiley-Liss, Inc.

Expert and Knowledge Based Systems.

ERIC Educational Resources Information Center

Demaid, Adrian; Edwards, Lyndon

1987-01-01

Discusses the nature and current state of knowledge-based systems and expert systems. Describes an expert system from the viewpoints of a computer programmer and an applications expert. Addresses concerns related to materials selection and forecasts future developments in the teaching of materials engineering. (ML)

Pulmonary hypertension: Real-world data from a Portuguese expert referral centre.

PubMed

Gomes, A; Cruz, C; Rocha, J; Ricardo, M; Vicente, M; Melo, A; Santos, M; Carvalho, L; Gonçalves, F; Reis, A

2018-04-16

Pulmonary hypertension (PH) is a heterogeneous, debilitating condition with highly relevant impact on functional capacity, quality of life, and life-expectancy. This study aims to provide long-term data on the Portuguese PH population, by characterising the clinical presentation, evolution, and outcomes of PH patients in a specialised referral centre. Retrospective analysis of a cohort of 101 patients with pre-capillary PH (pcPH) referenced to an expert tertiary care referral centre in northern Portugal from 2002 to 2013. Diagnosis was confirmed by right heart catheterisation (RHC). PH classification followed consensus criteria from the 5th World Symposium in Nice, 2013. The most frequent causes of pcPH were Group 1 PH - pulmonary arterial hypertension (PAH) (54.4%) and Group 4 PH - Chronic thromboembolic pulmonary hypertension (CTEPH) (25.7%); importantly, 17.8% of patients presented PH associated with multiple aetiologies. Targeted therapy was used in 91.1% of patients (48.5% combination therapy). 1-, 3-, and 5-year survival was estimated at 86.6%, 76.7%, and 64.1%, respectively. Survival was significantly better for those ≤40 years old (10.5 vs. 6.4 years; P=0.003) and for women with I/HPAH (9.3 vs. 4.5 years; P=0.039). This study provides long-term, real-world data for the management of PAH and CTEPH in Portugal and demonstrates the importance of dedicated electronic medical records and well defined clinical management protocols for better patient outcomes. Patients presented mostly with intermediate or high risk of mortality, which suggests delayed diagnosis and highlights the need to increase awareness among clinicians. Copyright © 2018 Sociedade Portuguesa de Pneumologia. Published by Elsevier España, S.L.U. All rights reserved.

Design and test of data acquisition systems for the Medipix2 chip based on PC standard interfaces

NASA Astrophysics Data System (ADS)

Fanti, Viviana; Marzeddu, Roberto; Piredda, Giuseppina; Randaccio, Paolo

2005-07-01

We describe two readout systems for hybrid detectors using the Medipix2 single photon counting chip, developed within the Medipix Collaboration. The Medipix2 chip (256×256 pixels, 55 μm pitch) has an active area of about 2 cm 2 and is bump-bonded to a pixel semiconductor array of silicon or other semiconductor material. The readout systems we are developing are based on two widespread standard PC interfaces: parallel port and USB (Universal Serial Bus) version 1.1. The parallel port is the simplest PC interface even if slow and the USB is a serial bus interface present nowadays on all PCs and offering good performances.

Phospholipid-sepiolite biomimetic interfaces for the immobilization of enzymes.

PubMed

Wicklein, Bernd; Darder, Margarita; Aranda, Pilar; Ruiz-Hitzky, Eduardo

2011-11-01

Biomimetic interfaces based on phosphatidylcholine (PC) assembled to the natural silicate sepiolite were prepared for the stable immobilization of the urease and cholesterol oxidase enzymes. This is an important issue in practical advanced applications such as biocatalysis or biosensing. The supported lipid bilayer (BL-PC), prepared from PC adsorption, was used for immobilization of enzymes and the resulting biomimetic systems were compared to several other supported layers including a lipid monolayer (ML-PC), a mixed phosphatidylcholine/octyl-galactoside layer (PC-OGal), a cetyltrimethylammonium monolayer (CTA), and also to the bare sepiolite surface. Interfacial characteristics of these layers were investigated with a focus on layer packing density, hydrophilicity/hydrophobicity, and surface charge, which are being considered as key points for enzyme immobilization and stabilization of their biological activity. Cytoplasmic urease and membrane-bound cholesterol oxidase, which served as model enzymes, were immobilized on the different PC-based hybrid materials to probe their biomimetic character. Enzymatic activity was assessed by cyclic voltammetry and UV-vis spectrophotometry. The resulting enzyme/bio-organoclay hybrids were applied as active phase of a voltammetric urea biosensor and cholesterol bioreactor, respectively. Urease supported on sepiolite/BL-PC proved to maintain its enzymatic activity over several months while immobilized cholesterol oxidase demonstrated high reusability as biocatalyst. The results emphasize the good preservation of bioactivity due to the accommodation of the enzymatic system within the biomimetic lipid interface on sepiolite.

Defeating Leishmania resistance to miltefosine (hexadecylphosphocholine) by peptide-mediated drug smuggling: a proof of mechanism for trypanosomatid chemotherapy.

PubMed

Luque-Ortega, Juan Román; de la Torre, Beatriz G; Hornillos, Valentín; Bart, Jean-Mathieu; Rueda, Cristina; Navarro, Miguel; Amat-Guerri, Francisco; Acuña, A Ulises; Andreu, David; Rivas, Luis

2012-08-10

Miltefosine (hexadecylphosphocholine, HePC), the first orally active drug successful against leishmaniasis, is especially active on the visceral form of the disease. Resistance mechanisms are almost exclusively associated to dysfunction in HePC uptake systems. In order to evade the requirements of its cognate receptor/translocator, HePC-resistant Leishmania donovani parasites (R40 strain) were challenged with constructs consisting of an ω-thiol-functionalized HePC analogue conjugated to the cell-penetrating peptide (CPP) Tat(48-60), either through a disulfide or a thioether bond. The conjugates enter and kill both promastigote and intracellular amastigote forms of the R40 strain. Intracellular release of HePC by reduction of the disulfide-based conjugate was confirmed by means of double tagging at both the CPP (Quasar 670) and HePC (BODIPY) moieties. Scission of the conjugate, however, is not mandatory, as the metabolically more stable thioether conjugate retained substantial activity. The disulfide conjugate is highly active on the bloodstream form of Trypanosoma b. brucei, naturally resistant to HePC. Our results provide proof-of-mechanism for the use of CPP conjugates to avert drug resistance by faulty drug accumulation in parasites, as well as the possibility to extend chemotherapy into other parasites intrinsically devoid of membrane translocation systems. Copyright © 2012 Elsevier B.V. All rights reserved.

Influence of oxidized lipids on palmitoyl-oleoyl-phosphatidylcholine organization, contribution of Langmuir monolayers and Langmuir-Blodgett films.

PubMed

Grauby-Heywang, Christine; Moroté, Fabien; Mathelié-Guinlet, Marion; Gammoudi, Ibtissem; Faye, Ndeye Rokhaya; Cohen-Bouhacina, Touria

2016-10-01

In this work, we studied the interaction of two oxidized lipids, PoxnoPC and PazePC, with POPC phospholipid. Mean molecular areas obtained from (π-A) isotherms of mixed PoxnoPC-POPC and PazePC-POPC monolayers revealed different behaviors of these two oxidized lipids: the presence of PoxnoPC in the monolayers induces their expansion, mean molecular areas being higher than those expected in the case of ideal mixtures. PazePC-POPC behave on the whole ideally. This difference can be explained by a different conformation of oxidized lipids. Moreover the carboxylic function of PazePC is protonated under our experimental conditions, as shown by (π-A) isotherms of PazePC at different pH values. Both oxidized lipids induce also an increase of the monolayer elasticity, PoxnoPC being slightly more efficient than PazePC. These monolayers were transferred from the air-water interface onto mica supports for a study by AFM. AFM images are on the whole homogenous, suggesting the presence of only one lipid phase in both cases. However, in the case of PazePC-POPC monolayers, AFM images show also the presence of areas thicker of 7nm to 10nm than the surrounding lipid phase, probably due to the local formation of multilayer systems induced by compression. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

NASA PC software evaluation project

NASA Technical Reports Server (NTRS)

Dominick, Wayne D. (Editor); Kuan, Julie C.

1986-01-01

The USL NASA PC software evaluation project is intended to provide a structured framework for facilitating the development of quality NASA PC software products. The project will assist NASA PC development staff to understand the characteristics and functions of NASA PC software products. Based on the results of the project teams' evaluations and recommendations, users can judge the reliability, usability, acceptability, maintainability and customizability of all the PC software products. The objective here is to provide initial, high-level specifications and guidelines for NASA PC software evaluation. The primary tasks to be addressed in this project are as follows: to gain a strong understanding of what software evaluation entails and how to organize a structured software evaluation process; to define a structured methodology for conducting the software evaluation process; to develop a set of PC software evaluation criteria and evaluation rating scales; and to conduct PC software evaluations in accordance with the identified methodology. Communication Packages, Network System Software, Graphics Support Software, Environment Management Software, General Utilities. This report represents one of the 72 attachment reports to the University of Southwestern Louisiana's Final Report on NASA Grant NGT-19-010-900. Accordingly, appropriate care should be taken in using this report out of context of the full Final Report.

Knowing Our Neighbors: Two In and One Out

NASA Astrophysics Data System (ADS)

Bartlett, Jennifer L.; Lurie, John C.; Ianna, Philip A.; Riedel, Adric R.; Winters, Jennifer G.; Finch, Charlie T.; Jao, Wei-Chun; Subasavage, John P.; Henry, Todd J.

2016-01-01

Obtaining a well-understood, volume-limited (and ultimately volume-complete) sample of nearby stars is necessary for determining a host of interesting astrophysical quantities, including the stellar luminosity and mass functions, the distribution of stellar velocities, and the stellar multiplicity fraction. Furthermore, such a sample provides insight into the local star formation history. Towards that end, the Research Consortium on Nearby Stars (RECONS) team measures trigonometric parallaxes to establish which systems truly lie within the Solar Neighborhood, emphasizing those within 25 pc. Less accurate photometric and spectroscopic estimates previously suggested LP 991-84, LHS 6167AB, and LHS 2880 as possible members of the 10-pc sample, which made them desirable candidates.Recent measurements with the CTIO/SMARTS 0.9-m telescope place LP 991-84 and LHS 6167AB at 8.6 ± 0.1 and 9.68 ± 0.09 pc, respectively, which is consistent with earlier estimates of their distances. However, the final parallax for LHS 2880 places it beyond 25 pc, at a distance of 31 ± 1 pc, despite its previous identification as a member of the 10-pc sample. The proper motions of these systems are 0.2589 ± 0.0004, 0.4394 ± 0.0003, and 0.7113 ± 0.0009 arcsec yr-1, respectively.To characterize these systems more fully, the RECONS team obtained VRI photometry for each; they range from 13.8-14.5 mag. in V. LHS 6167AB also shows signs of long-term variability in V, including a possible flare. In addition, CTIO 1.5-m spectroscopy identifies LP 991-84 and LHS 6167AB as M4.5 V systems.Even as we aspire to identify all the stars within 25 pc, we find that the 10-pc volume still holds some surprises.NSF grants AST 05-07711 and AST 09-08402, NASA-SIM, Georgia State University, the University of Virginia, Hampden-Sydney College, and the Levinson Fund of the Peninsula Community Foundation supported this research. CTIOPI was an NOAO Survey Program and continues as part of the SMARTS Consortium. We thank the SMARTS Consortium and the CTIO staff, who enable the small telescope operations at CTIO.

Reliability and performance evaluation of systems containing embedded rule-based expert systems

NASA Technical Reports Server (NTRS)

Beaton, Robert M.; Adams, Milton B.; Harrison, James V. A.

1989-01-01

A method for evaluating the reliability of real-time systems containing embedded rule-based expert systems is proposed and investigated. It is a three stage technique that addresses the impact of knowledge-base uncertainties on the performance of expert systems. In the first stage, a Markov reliability model of the system is developed which identifies the key performance parameters of the expert system. In the second stage, the evaluation method is used to determine the values of the expert system's key performance parameters. The performance parameters can be evaluated directly by using a probabilistic model of uncertainties in the knowledge-base or by using sensitivity analyses. In the third and final state, the performance parameters of the expert system are combined with performance parameters for other system components and subsystems to evaluate the reliability and performance of the complete system. The evaluation method is demonstrated in the context of a simple expert system used to supervise the performances of an FDI algorithm associated with an aircraft longitudinal flight-control system.

Executing CLIPS expert systems in a distributed environment

NASA Technical Reports Server (NTRS)

Taylor, James; Myers, Leonard

1990-01-01

This paper describes a framework for running cooperating agents in a distributed environment to support the Intelligent Computer Aided Design System (ICADS), a project in progress at the CAD Research Unit of the Design Institute at the California Polytechnic State University. Currently, the systems aids an architectural designer in creating a floor plan that satisfies some general architectural constraints and project specific requirements. At the core of ICADS is the Blackboard Control System. Connected to the blackboard are any number of domain experts called Intelligent Design Tools (IDT). The Blackboard Control System monitors the evolving design as it is being drawn and helps resolve conflicts from the domain experts. The user serves as a partner in this system by manipulating the floor plan in the CAD system and validating recommendations made by the domain experts. The primary components of the Blackboard Control System are two expert systems executed by a modified CLIPS shell. The first is the Message Handler. The second is the Conflict Resolver. The Conflict Resolver synthesizes the suggestions made by the domain experts, which can be either CLIPS expert systems, or compiled C programs. In DEMO1, the current ICADS prototype, the CLIPS domain expert systems are Acoustics, Lighting, Structural, and Thermal; the compiled C domain experts are the CAD system and the User Interface.

Expert system prototype developments for NASA-KSC business and engineering applications

NASA Technical Reports Server (NTRS)

Ragusa, James M.; Gonzalez, Avelino J.

1988-01-01

Prototype expert systems developed for a variety of NASA projects in the business/management and engineering domains are discussed. Business-related problems addressed include an assistant for simulating launch vehicle processing, a plan advisor for the acquisition of automated data processing equipment, and an expert system for the identification of customer requirements. Engineering problems treated include an expert system for detecting potential ignition sources in LOX and gaseous-oxygen transportation systems and an expert system for hazardous-gas detection.

Cloning and heterologous expression of two aryl-aldehyde dehydrogenases from the white-rot basidiomycete Phanerochaete chrysosporium

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nakamura, Tomofumi; Fukuoka Institute of Health and Environmental Sciences, 39 Mukaizano, Dazaifu-shi, Fukuoka 818-0135; Ichinose, Hirofumi

2010-04-09

We identified two aryl-aldehyde dehydrogenase proteins (PcALDH1 and PcALDH2) from the white-rot basidiomycete Phanerochaete chrysosporium. Both PcALDHs were translationally up-regulated in response to exogenous addition of vanillin, one of the key aromatic compounds in the pathway of lignin degradation by basidiomycetes. To clarify the catalytic functions of PcALDHs, we isolated full-length cDNAs encoding these proteins and heterologously expressed the recombinant enzymes using a pET/Escherichia coli system. The open reading frames of both PcALDH1 and PcALDH2 consisted of 1503 nucleotides. The deduced amino acid sequences of both proteins showed high homologies with aryl-aldehyde dehydrogenases from other organisms and contained ten conservedmore » domains of ALDHs. Moreover, a novel glycine-rich motif 'GxGxxxG' was located at the NAD{sup +}-binding site. The recombinant PcALDHs catalyzed dehydrogenation reactions of several aryl-aldehyde compounds, including vanillin, to their corresponding aromatic acids. These results strongly suggested that PcALDHs metabolize aryl-aldehyde compounds generated during fungal degradation of lignin and various aromatic xenobiotics.« less

Synthesis and strong optical limiting response of graphite oxide covalently functionalized with gallium phthalocyanine

NASA Astrophysics Data System (ADS)

Li, Yong-Xi; Zhu, Jinhui; Chen, Yu; Zhang, Jinjuan; Wang, Jun; Zhang, Bin; He, Ying; Blau, Werner J.

2011-05-01

A soluble graphite oxide (GO) axially substituted gallium phthalocyanine (PcGa) hybrid material (GO-PcGa) was for the first time synthesized by the reaction of tBu4PcGaCl with GO in anhydrous DMSO at 110 °C in the presence of K2CO3. The formation of a Ga-O bond between PcGa and GO has been confirmed by x-ray photoelectron spectroscopy. In contrast to GO, the D and G bands of GO-PcGa in the Raman spectrum are shifted to the lower wavenumbers by Δν = 11 and 18 cm - 1, respectively. At the same level of concentration of 0.1 g l - 1, GO-PcGa exhibit much larger nonlinear optical extinction coefficients and strong optical limiting performance than GO, tBu4PcGaCl and C60 at both 532 and 1064 nm, implying a remarkable accumulation effect as a result of the covalent link between GO and PcGa. GO-PcGa possesses three main mechanisms for the nonlinear optical response—nonlinear light scattering, two-photon absorption and reverse saturable absorption for the 532 nm pulses and nonlinear light scattering for the 1064 nm pulses. tBu4PcGaCl does not make any significant contribution to the optical limiting at 1064 nm, while GO-PcGa has a much greater optical limiting response than GO at this wavelength, this suggesting that the PcGa moiety could certainly play an unknown but important role in the GO-PcGa material system.

Predictors of outpatients' request for palliative care service at a medical oncology clinic of a German comprehensive cancer center.

PubMed

Tewes, Mitra; Rettler, Teresa; Wolf, Nathalie; Hense, Jörg; Schuler, Martin; Teufel, Martin; Beckmann, Mingo

2018-05-05

Early integration of palliative care (PC) is recommended. The determination of predictors for patients' request for PC may guide implementation in clinical practice. Toward this end, we analyzed the symptom burden and distress of cancer patients in outpatient care and examined their need and request for PC. Between October 2013 and March 2016, 705 patients receiving outpatient cancer treatment took part in the survey. We used the new MInimal DOcumentation System to detect symptom clusters. Additionally, patients' request for palliative and psychosocial support was assessed. Groups of patients with PC request were compared to patients without PC request regarding their symptom clusters. Logistic regression analysis was applied to discover significant predictors for the requested inclusion of PC. A total of 159 patients (25.5%) requested additional support by PC. Moderate and severe tiredness (40.3%), weakness (37.9%), pain (25.0%), loss of appetite (22.3%), and dyspnea (19.1%) were the most frequent symptoms. The group of patients requesting PC differed significantly in terms of pain, nausea, dyspnea, constipation, weakness, loss of appetite, tiredness, depression, and anxiety from patients without request for PC (p < .01). The perceived need for PC was identified by the significant predictors "depression," "anxiety," and "weakness" with an explained variance of 22%. Combining a standardized screening questionnaire and the assessment of patients' request for PC allows systematic monitoring for patients' need for PC in a large Medical Oncology clinic. Depression, anxiety, and weakness are predictors of requesting PC service by patients receiving outpatient cancer treatment.

USER'S GUIDE TO THE PERSONAL COMPUTER VERSION OF THE BIOGENIC EMISSIONS INVENTORY SYSTEM (PC-BEIS2)

EPA Science Inventory

The document is a user's guide for an updated Personal Computer version of the Biogenic Emissions Inventory System (PC-BEIS2), allowing users to estimate hourly emissions of biogenic volatile organic compounds (BVOCs) and soil nitrogen oxide emissions for any county in the contig...

Knowledge-based fault diagnosis system for refuse collection vehicle

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tan, CheeFai; Juffrizal, K.; Khalil, S. N.

The refuse collection vehicle is manufactured by local vehicle body manufacturer. Currently; the company supplied six model of the waste compactor truck to the local authority as well as waste management company. The company is facing difficulty to acquire the knowledge from the expert when the expert is absence. To solve the problem, the knowledge from the expert can be stored in the expert system. The expert system is able to provide necessary support to the company when the expert is not available. The implementation of the process and tool is able to be standardize and more accurate. The knowledgemore » that input to the expert system is based on design guidelines and experience from the expert. This project highlighted another application on knowledge-based system (KBS) approached in trouble shooting of the refuse collection vehicle production process. The main aim of the research is to develop a novel expert fault diagnosis system framework for the refuse collection vehicle.« less

Tablet PC Enabled Body Sensor System for Rural Telehealth Applications

PubMed Central

Panicker, Nitha V.; Kumar, A. Sukesh

2016-01-01

Telehealth systems benefit from the rapid growth of mobile communication technology for measuring physiological signals. Development and validation of a tablet PC enabled noninvasive body sensor system for rural telehealth application are discussed in this paper. This system includes real time continuous collection of physiological parameters (blood pressure, pulse rate, and temperature) and fall detection of a patient with the help of a body sensor unit and wireless transmission of the acquired information to a tablet PC handled by the medical staff in a Primary Health Center (PHC). Abnormal conditions are automatically identified and alert messages are given to the medical officer in real time. Clinical validation is performed in a real environment and found to be successful. Bland-Altman analysis is carried out to validate the wrist blood pressure sensor used. The system works well for all measurements. PMID:26884757

Evaluation of theranostic nanocarriers for near-infrared imaging and photodynamic therapy on human prostate cancer cells.

PubMed

Leandro, Fernanda Z; Martins, Júlia; Fontes, Aparecida M; Tedesco, Antonio C

2017-06-01

This paper evaluates how effectively chloroaluminum phthalocyanine (ClAlPc) entrapped in colloidal nanocarriers, such as nanocapsule (NC) and nanoemulsion (NE), induces photodamage in human prostate cancer cells (LNCaP) during photodynamic therapy (PDT). The MTT cell viability assay showed that both ClAlPc-NC and ClAlPc-NE induced phototoxicity and efficiently killed LNCaP cells at low ClAlPc-NC and ClAlPc-NE concentrations (0.3μgmL -1 ) as well as under low light doses of 4Jcm -2 and 7Jcm -2 , respectively, upon PDT with a 670-nm diode laser line. Confocal imaging studies indicated that ClAlPc-NC and ClAlPc-NE were preferentially localized in the perinuclear region of LNCaP cells both in the dark and upon irradiation with laser light. After PDT treatment, ClAlPc-NC-treated LNCaP cells exhibited a higher green fluorescence signal, possibly due to the larger shrinkage of the actin cytoskeleton, compared to ClAlPc-NE-treated LNCaP cells. Additionally, ClAlPc-NC or ClAlPc-NE and mitochondria showed a relatively high co-localization level. The cellular morphology did not change in the dark, but confocal micrographs recorded after PDT revealed that LNCaP cells treated with ClAlPc-NC or ClAlPc-NE underwent morphological alterations. Our preliminary in vitro studies reinforced the hypothesis that biocompatible theranostic ClAlPc-loaded nanocarriers could act as an attractive photosensitizer system in PDT and could serve as an interesting molecular probe for the early diagnosis of prostate cancer and other carcinomas. Copyright © 2017 Elsevier B.V. All rights reserved.

Creating Security System Models Using SNAP-PC.

DTIC Science & Technology

1987-05-01

Submodel ATTGRD Prompts ............ 228 x ACKNOWLEDGEMENTS SNAP was originally developed in the late 1970’s by Pritsker & Associates, Inc., for Sandia...systems. The other was to simplify the simulation process so that a person knowledgeable in security planning and who had little experience in ...simulation techniques could use simulation in his evaluation of security systems. SNAP-PC was developed by Pritsker & Associates, Inc., for Sandia with

A parallel strategy for implementing real-time expert systems using CLIPS

NASA Technical Reports Server (NTRS)

Ilyes, Laszlo A.; Villaseca, F. Eugenio; Delaat, John

1994-01-01

As evidenced by current literature, there appears to be a continued interest in the study of real-time expert systems. It is generally recognized that speed of execution is only one consideration when designing an effective real-time expert system. Some other features one must consider are the expert system's ability to perform temporal reasoning, handle interrupts, prioritize data, contend with data uncertainty, and perform context focusing as dictated by the incoming data to the expert system. This paper presents a strategy for implementing a real time expert system on the iPSC/860 hypercube parallel computer using CLIPS. The strategy takes into consideration not only the execution time of the software, but also those features which define a true real-time expert system. The methodology is then demonstrated using a practical implementation of an expert system which performs diagnostics on the Space Shuttle Main Engine (SSME). This particular implementation uses an eight node hypercube to process ten sensor measurements in order to simultaneously diagnose five different failure modes within the SSME. The main program is written in ANSI C and embeds CLIPS to better facilitate and debug the rule based expert system.

Phytosome-hyaluronic acid systems for ocular delivery of L-carnosine

PubMed Central

Abdelkader, Hamdy; Longman, Michael R; Alany, Raid G; Pierscionek, Barbara

2016-01-01

This study reports on L-carnosine phytosomes as an alternative for the prodrug N-acetyl-L-carnosine as a novel delivery system to the lens. L-carnosine was loaded into lipid-based phytosomes and hyaluronic acid (HA)-dispersed phytosomes. L-carnosine-phospholipid complexes (PC) of different molar ratios, 1:1 and 1:2, were prepared by the solvent evaporation method. These complexes were characterized with thermal and spectral analyses. PC were dispersed in either phosphate buffered saline pH 7.4 or HA (0.1% w/v) in phosphate buffered saline to form phytosomes PC1:1, PC1:2, and PC1:2 HA, respectively. These phytosomal formulations were studied for size, zeta potential, morphology, contact angle, spreading coefficient, viscosity, ex vivo transcorneal permeation, and cytotoxicity using primary human corneal cells. L-carnosine-phospholipid formed a complex at a 1:2 molar ratio and phytosomes were in the size range of 380–450 nm, polydispersity index of 0.12–0.2. The viscosity of PC1:2 HA increased by 2.4 to 5-fold compared with HA solution and PC 1:2, respectively; significantly lower surface tension, contact angle, and greater spreading ability for phytosomes were also recorded. Ex vivo transcorneal permeation parameters showed significantly controlled corneal permeation of L-carnosine with the novel carrier systems without any significant impact on primary human corneal cell viability. Ex vivo porcine lenses incubated in high sugar media without and with L-carnosine showed concentration-dependent marked inhibition of lens brunescence indicative of the potential for delaying changes that underlie cataractogenesis that may be linked to diabetic processes. PMID:27366062

Explainable expert systems: A research program in information processing

NASA Technical Reports Server (NTRS)

Paris, Cecile L.

1993-01-01

Our work in Explainable Expert Systems (EES) had two goals: to extend and enhance the range of explanations that expert systems can offer, and to ease their maintenance and evolution. As suggested in our proposal, these goals are complementary because they place similar demands on the underlying architecture of the expert system: they both require the knowledge contained in a system to be explicitly represented, in a high-level declarative language and in a modular fashion. With these two goals in mind, the Explainable Expert Systems (EES) framework was designed to remedy limitations to explainability and evolvability that stem from related fundamental flaws in the underlying architecture of current expert systems.

SWAN: An expert system with natural language interface for tactical air capability assessment

NASA Technical Reports Server (NTRS)

Simmons, Robert M.

1987-01-01

SWAN is an expert system and natural language interface for assessing the war fighting capability of Air Force units in Europe. The expert system is an object oriented knowledge based simulation with an alternate worlds facility for performing what-if excursions. Responses from the system take the form of generated text, tables, or graphs. The natural language interface is an expert system in its own right, with a knowledge base and rules which understand how to access external databases, models, or expert systems. The distinguishing feature of the Air Force expert system is its use of meta-knowledge to generate explanations in the frame and procedure based environment.

DELTA: An Expert System for Diesel Electric Locomotive Repair

DTIC Science & Technology

1984-06-01

Rules and Inference Mechanisms. AD-P003 943 The ACE (Automated Cable Expert) Exlpelient: Initial Evaluation of an Expert System for Preventive...tions. The first field prototype expert system, designated CATS -i (Computer-Aided Troubleshooting System - Version 1), was delivered in July 1983 and is

Parachute Compartment Drop Test Vehicle for Testing the Crew Exploration Vehicle's Parachute Assembly System

NASA Technical Reports Server (NTRS)

Lubey, Daniel P.; Thiele, Sara R.; Gruseck, Madelyn L.; Evans, Carol T.

2010-01-01

Though getting astronauts safely into orbit and beyond has long been one of NASA?s chief goals, their safe return has always been equally as important. The Crew Exploration Vehicle?s (CEV) Parachute Assembly System (CPAS) is designed to safely return astronauts to Earth on the next-generation manned spacecraft Orion. As one means for validating this system?s requirements and testing its functionality, a test article known as the Parachute Compartment Drop Test Vehicle (PC-DTV) will carry a fully-loaded yet truncated CPAS Parachute Compartment (PC) in a series of drop tests. Two aerodynamic profiles for the PC-DTV currently exist, though both share the same interior structure, and both have an Orion-representative weight of 20,800 lbf. Two extraction methods have been developed as well. The first (Cradle Monorail System 2 - CMS2) uses a sliding rail technique to release the PC-DTV midair, and the second (Modified DTV Sled; MDS) features a much less constrained separation method though slightly more complex. The decision as to which aerodynamic profile and extraction method to use is still not finalized. Additional CFD and stress analysis must be undertaken in order to determine the more desirable options, though at present the "boat tail" profile and the CMS2 extraction method seem to be the favored options in their respective categories. Fabrication of the PC-DTV and the selected extraction sled is set to begin in early October 2010 with an anticipated first drop test in mid-March 2011.

Identification and Characterization of a High-Affinity Choline Uptake System of Brucella abortus

PubMed Central

Herrmann, Claudia K.; Bukata, Lucas; Melli, Luciano; Marchesini, M. Ines; Caramelo, Julio J.

2013-01-01

Phosphatidylcholine (PC), a common phospholipid of the eukaryotic cell membrane, is present in the cell envelope of the intracellular pathogen Brucella abortus, the etiological agent of bovine brucellosis. In this pathogen, the biosynthesis of PC proceeds mainly through the phosphatidylcholine synthase pathway; hence, it relies on the presence of choline in the milieu. These observations imply that B. abortus encodes an as-yet-unknown choline uptake system. Taking advantage of the requirement of choline uptake for PC synthesis, we devised a method that allowed us to identify a homologue of ChoX, the high-affinity periplasmic binding protein of the ABC transporter ChoXWV. Disruption of the choX gene completely abrogated PC synthesis at low choline concentrations in the medium, thus indicating that it is a high-affinity transporter needed for PC synthesis via the PC synthase (PCS) pathway. However, the synthesis of PC was restored when the mutant was incubated in media with higher choline concentrations, suggesting the presence of an alternative low-affinity choline uptake activity. By means of a fluorescence-based equilibrium-binding assay and using the kinetics of radiolabeled choline uptake, we show that ChoX binds choline with an extremely high affinity, and we also demonstrate that its activity is inhibited by increasing choline concentrations. Cell infection assays indicate that ChoX activity is required during the first phase of B. abortus intracellular traffic, suggesting that choline concentrations in the early and intermediate Brucella-containing vacuoles are limited. Altogether, these results suggest that choline transport and PC synthesis are strictly regulated in B. abortus. PMID:23161032

Spectral investigations on binding of DNA-CTMA complex with tetrameric copper phthalocyanines

NASA Astrophysics Data System (ADS)

Venkat, Narayanan; Haley, Joy E.; Swiger, Rachel; Zhu, Lei; Wei, Xiaoliang; Ouchen, Fahima; Grote, James G.

2013-10-01

The binding of DNA-CTMA (Deoxyribonucleic acid-cetyltrimethylammonium) complex with two tetrameric Copper Phthalocyanine (CuPc) systems, substituted with carboxylic acid (CuPc-COOH) and derivatized further as an imidazolium salt (CuPc-COOR), was investigated in dimethylsulfoxide (DMSO) solutions using UV/Visible Spectroscopy. Absorbance changes at 685 nm (Q band of the CuPc) were monitored as a function of DNA-CTMA added to the dye solution and stock concentrations of DNA-CTMA in DMSO were varied to facilitate observation of the full binding process. Our findings indicated that while binding with DNA-CTMA was more well-defined in the case of CuPc-COOH, the binding profile of the CuPc-COOR showed initial growth followed by decay in its Q-band absorbance which was indicative of a more complex binding mechanism involving the dye and DNA-CTMA. Preliminary findings from photophysical studies involving the CuPc tetramers and DNA-CTMA are also discussed in this paper.

Origin of the energy level alignment at organic/organic interfaces: The role of structural defects

NASA Astrophysics Data System (ADS)

Bussolotti, Fabio; Yang, Jinpeng; Hinderhofer, Alexander; Huang, Yuli; Chen, Wei; Kera, Satoshi; Wee, Andrew T. S.; Ueno, Nobuo

2014-03-01

In this paper, the electronic properties of as-deposited and N2-exposedCuPc/F16CuPc interface, a prototype system for organic photovoltaic applications, are investigated by using ultralow background, high-sensitivity photoemission spectroscopy. It is found that (i) N2 exposure significantly modifies the energy level alignment (ELA) at the interface between CuPc and F16CuPc layer and (ii) the direction of the N2-induced energy level shift of the CuPc depends on the position of the Fermi level (EF) in the CuPc highest occupied molecular orbital-lowest unoccupied molecular orbital gap of the as-deposited film. These observations are related to the changes in the density of gap states (DOGS) produced by structural imperfections in the molecular packing geometry, as introduced by the N2 penetration into the CuPc layer. This result demonstrates the key role of structure-induced DOGS in controlling the ELA at organic/organic interfaces.

Uptake and transcytosis of functionalized superparamagnetic iron oxide nanoparticles in an in vitro blood brain barrier model.

PubMed

Ivask, Angela; Pilkington, Emily H; Blin, Thomas; Käkinen, Aleksandr; Vija, Heiki; Visnapuu, Meeri; Quinn, John F; Whittaker, Michael R; Qiao, Ruirui; Davis, Thomas P; Ke, Pu Chun; Voelcker, Nicolas H

2018-01-30

Two major hurdles in nanomedicine are the limited strategies for synthesizing stealth nanoparticles and the poor efficacy of the nanoparticles in translocating across the blood brain barrier (BBB). Here we examined the uptake and transcytosis of iron oxide nanoparticles (IONPs) grafted with biomimetic phosphorylcholine (PC) brushes in an in vitro BBB model system, and compared them with bare, PEG or PC-PEG mixture grafted IONPs. Hyperspectral imaging indicated IONP co-localization with cells. Quantitative analysis with total reflection X-ray fluorescence spectrometry showed that after 24 h, 78% of PC grafted, 68-69% of PEG or PC-PEG grafted, and 30% of bare IONPs were taken up by the BBB. Transcytosis of IONPs was time-dependent and after 24 h, 16-17% of PC or PC-PEG mixture grafted IONPs had passed the BBB model, significantly more than PEG grafted or bare IONPs. These findings point out that grafting of IONPs with PC is a viable strategy for improving the uptake and transcytosis of nanoparticles.

Aircraft noise prediction program propeller analysis system IBM-PC version user's manual version 2.0

NASA Technical Reports Server (NTRS)

Nolan, Sandra K.

1988-01-01

The IBM-PC version of the Aircraft Noise Prediction Program (ANOPP) Propeller Analysis System (PAS) is a set of computational programs for predicting the aerodynamics, performance, and noise of propellers. The ANOPP-PAS is a subset of a larger version of ANOPP which can be executed on CDC or VAX computers. This manual provides a description of the IBM-PC version of the ANOPP-PAS and its prediction capabilities, and instructions on how to use the system on an IBM-XT or IBM-AT personal computer. Sections within the manual document installation, system design, ANOPP-PAS usage, data entry preprocessors, and ANOPP-PAS functional modules and procedures. Appendices to the manual include a glossary of ANOPP terms and information on error diagnostics and recovery techniques.

A New PC and LabVIEW Package Based System for Electrochemical Investigations

PubMed Central

Stević, Zoran; Andjelković, Zoran; Antić, Dejan

2008-01-01

The paper describes a new PC and LabVIEW software package based system for electrochemical research. An overview of well known electrochemical methods, such as potential measurements, galvanostatic and potentiostatic method, cyclic voltammetry and EIS is given. Electrochemical impedance spectroscopy has been adapted for systems containing large capacitances. For signal generation and recording of the response of investigated electrochemical cell, a measurement and control system was developed, based on a PC P4. The rest of the hardware consists of a commercially available AD-DA converter and an external interface for analog signal processing. The interface is a result of authors own research. The software platform for desired measurement methods is LabVIEW 8.2 package, which is regarded as a high standard in the area of modern virtual instruments. The developed system was adjusted, tested and compared with commercially available system and ORCAD simulation. PMID:27879794

Techniques for capturing expert knowledge - An expert systems/hypertext approach

NASA Technical Reports Server (NTRS)

Lafferty, Larry; Taylor, Greg; Schumann, Robin; Evans, Randy; Koller, Albert M., Jr.

1990-01-01

The knowledge-acquisition strategy developed for the Explosive Hazards Classification (EHC) Expert System is described in which expert systems and hypertext are combined, and broad applications are proposed. The EHC expert system is based on rapid prototyping in which primary knowledge acquisition from experts is not emphasized; the explosive hazards technical bulletin, technical guidance, and minimal interviewing are used to develop the knowledge-based system. Hypertext is used to capture the technical information with respect to four issues including procedural, materials, test, and classification issues. The hypertext display allows the integration of multiple knowlege representations such as clarifications or opinions, and thereby allows the performance of a broad range of tasks on a single machine. Among other recommendations, it is suggested that the integration of hypertext and expert systems makes the resulting synergistic system highly efficient.

Diagnosis - Using automatic test equipment and artificial intelligence expert systems

NASA Astrophysics Data System (ADS)

Ramsey, J. E., Jr.

Three expert systems (ATEOPS, ATEFEXPERS, and ATEFATLAS), which were created to direct automatic test equipment (ATE), are reviewed. The purpose of the project was to develop an expert system to troubleshoot the converter-programmer power supply card for the F-15 aircraft and have that expert system direct the automatic test equipment. Each expert system uses a different knowledge base or inference engine, basing the testing on the circuit schematic, test requirements document, or ATLAS code. Implementing generalized modules allows the expert systems to be used for any different unit under test. Using converted ATLAS to LISP code allows the expert system to direct any ATE using ATLAS. The constraint propagated frame system allows for the expansion of control by creating the ATLAS code, checking the code for good software engineering techniques, directing the ATE, and changing the test sequence as needed (planning).

Understanding Financial Market States Using an Artificial Double Auction Market

PubMed Central

2016-01-01

The ultimate value of theories describing the fundamental mechanisms behind asset prices in financial systems is reflected in the capacity of such theories to understand these systems. Although the models that explain the various states of financial markets offer substantial evidence from the fields of finance, mathematics, and even physics, previous theories that attempt to address the complexities of financial markets in full have been inadequate. We propose an artificial double auction market as an agent-based model to study the origin of complex states in financial markets by characterizing important parameters with an investment strategy that can cover the dynamics of the financial market. The investment strategies of chartist traders in response to new market information should reduce market stability based on the price fluctuations of risky assets. However, fundamentalist traders strategically submit orders based on fundamental value and, thereby stabilize the market. We construct a continuous double auction market and find that the market is controlled by the proportion of chartists, Pc. We show that mimicking the real state of financial markets, which emerges in real financial systems, is given within the range Pc = 0.40 to Pc = 0.85; however, we show that mimicking the efficient market hypothesis state can be generated with values less than Pc = 0.40. In particular, we observe that mimicking a market collapse state is created with values greater than Pc = 0.85, at which point a liquidity shortage occurs, and the phase transition behavior is described at Pc = 0.85. PMID:27031110

Understanding Financial Market States Using an Artificial Double Auction Market.

PubMed

Yim, Kyubin; Oh, Gabjin; Kim, Seunghwan

2016-01-01

The ultimate value of theories describing the fundamental mechanisms behind asset prices in financial systems is reflected in the capacity of such theories to understand these systems. Although the models that explain the various states of financial markets offer substantial evidence from the fields of finance, mathematics, and even physics, previous theories that attempt to address the complexities of financial markets in full have been inadequate. We propose an artificial double auction market as an agent-based model to study the origin of complex states in financial markets by characterizing important parameters with an investment strategy that can cover the dynamics of the financial market. The investment strategies of chartist traders in response to new market information should reduce market stability based on the price fluctuations of risky assets. However, fundamentalist traders strategically submit orders based on fundamental value and, thereby stabilize the market. We construct a continuous double auction market and find that the market is controlled by the proportion of chartists, Pc. We show that mimicking the real state of financial markets, which emerges in real financial systems, is given within the range Pc = 0.40 to Pc = 0.85; however, we show that mimicking the efficient market hypothesis state can be generated with values less than Pc = 0.40. In particular, we observe that mimicking a market collapse state is created with values greater than Pc = 0.85, at which point a liquidity shortage occurs, and the phase transition behavior is described at Pc = 0.85.

The Redox-Active Chromium Phthalocyanine System: Isolation of Five Oxidation States from Pc4- CrI to Pc2- CrIII.

PubMed

Zhou, Wen; Thompson, John R; Leznoff, Clifford C; Leznoff, Daniel B

2017-02-16

The preparation and structural characterization of a series of chromium phthalocyanine complexes with multiple metal and ring oxidation states were achieved using PcCr II (1) (Pc=phthalocyanine) or PcCr II (THF) 2 (1⋅THF 2 ) as starting materials. The reaction of soluble 1⋅THF 2 with Br 2 or I 2 gave the PcCr III halide complexes PcCrX(THF) (X=I/I 3 , Br; 3, 4, respectively). Treatment of 1 with 0.5 equivalent of PhIO or air generated the dinuclear [PcCr(THF)] 2 (μ-O) (5), whereas the addition of one equivalent of AgSbF 6 to 1 resulted in oxidation to THF-solvated octahedral [PcCr III (THF) 2 ]SbF 6 (6). The reduction of 1 with three sequential equivalents of KEt 3 BH resulted in the isolation of [K(DME) 4 ][Pc 3- Cr II ] (7), [K(DME) 4 ] 2 [Pc 4- Cr II ] (8) and [K 6 (DME) 4 ][Pc 4- Cr I ] 2 (9), respectively. The reduced products are deep purple in colour, with visible absorption maxima between 500-580 nm. The ring-reduced complexes 7 and 8 are monomeric, whereas 9 is a 1D chain of dinuclear [PcCr] 2 units with intercalated K + cations and supported by Cr-Cr interactions of 2.988(2) Å. Addition of four equivalents of KC 8 resulted in the demetallated product PcK 2 (DME) 4 (10), which has a 1D chain structure. The isolation and structural characterization of new PcCr complexes spanning five oxidation states, including rare examples of crystalline reduced Pc-ring species emphasizes the broad redox activity and stability of phthalocyanine-based complexes. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Techniques and implementation of the embedded rule-based expert system using Ada

NASA Technical Reports Server (NTRS)

Liberman, Eugene M.; Jones, Robert E.

1991-01-01

Ada is becoming an increasingly popular programming language for large Government-funded software projects. Ada with its portability, transportability, and maintainability lends itself well to today's complex programming environment. In addition, expert systems have also assured a growing role in providing human-like reasoning capability and expertise for computer systems. The integration of expert system technology with Ada programming language, specifically a rule-based expert system using an ART-Ada (Automated Reasoning Tool for Ada) system shell is discussed. The NASA Lewis Research Center was chosen as a beta test site for ART-Ada. The test was conducted by implementing the existing Autonomous Power EXpert System (APEX), a Lisp-base power expert system, in ART-Ada. Three components, the rule-based expert system, a graphics user interface, and communications software make up SMART-Ada (Systems fault Management with ART-Ada). The main objective, to conduct a beta test on the ART-Ada rule-based expert system shell, was achieved. The system is operational. New Ada tools will assist in future successful projects. ART-Ada is one such tool and is a viable alternative to the straight Ada code when an application requires a rule-based or knowledge-based approach.

Expert Systems--The New International Language of Business.

ERIC Educational Resources Information Center

Sondak, Norman E.; And Others

A discussion of expert systems, computer programs designed to simulate human reasoning and expertise, begins with the assumption that few business educators understand the impact that expert systems will have on international business. The fundamental principles of the design and development of expert systems in business are outlined, with special…

Expert Systems in Education and Training: Automated Job Aids or Sophisticated Instructional Media?

ERIC Educational Resources Information Center

Romiszowski, Alexander J.

1987-01-01

Describes the current status and limitations of expert systems, and explores the possible applications of such systems in education and training. The use of expert systems as tutors, as job aids, and as a vehicle for students to develop their own expert systems on specific topics are discussed. (40 references) (CLB)

Expert systems and simulation models; Proceedings of the Seminar, Tucson, AZ, November 18, 19, 1985

NASA Technical Reports Server (NTRS)

1986-01-01

The seminar presents papers on modeling and simulation methodology, artificial intelligence and expert systems, environments for simulation/expert system development, and methodology for simulation/expert system development. Particular attention is given to simulation modeling concepts and their representation, modular hierarchical model specification, knowledge representation, and rule-based diagnostic expert system development. Other topics include the combination of symbolic and discrete event simulation, real time inferencing, and the management of large knowledge-based simulation projects.

Strategies for adding adaptive learning mechanisms to rule-based diagnostic expert systems

NASA Technical Reports Server (NTRS)

Stclair, D. C.; Sabharwal, C. L.; Bond, W. E.; Hacke, Keith

1988-01-01

Rule-based diagnostic expert systems can be used to perform many of the diagnostic chores necessary in today's complex space systems. These expert systems typically take a set of symptoms as input and produce diagnostic advice as output. The primary objective of such expert systems is to provide accurate and comprehensive advice which can be used to help return the space system in question to nominal operation. The development and maintenance of diagnostic expert systems is time and labor intensive since the services of both knowledge engineer(s) and domain expert(s) are required. The use of adaptive learning mechanisms to increment evaluate and refine rules promises to reduce both time and labor costs associated with such systems. This paper describes the basic adaptive learning mechanisms of strengthening, weakening, generalization, discrimination, and discovery. Next basic strategies are discussed for adding these learning mechanisms to rule-based diagnostic expert systems. These strategies support the incremental evaluation and refinement of rules in the knowledge base by comparing the set of advice given by the expert system (A) with the correct diagnosis (C). Techniques are described for selecting those rules in the in the knowledge base which should participate in adaptive learning. The strategies presented may be used with a wide variety of learning algorithms. Further, these strategies are applicable to a large number of rule-based diagnostic expert systems. They may be used to provide either immediate or deferred updating of the knowledge base.

A CAMAC-VME-Macintosh data acquisition system for nuclear experiments

NASA Astrophysics Data System (ADS)

Anzalone, A.; Giustolisi, F.

1989-10-01

A multiprocessor system for data acquisition and analysis in low-energy nuclear physics has been realized. The system is built around CAMAC, the VMEbus, and the Macintosh PC. Multiprocessor software has been developed, using RTF, MACsys, and CERN cross-software. The execution of several programs that run on several VME CPUs and on an external PC is coordinated by a mailbox protocol. No operating system is used on the VME CPUs. The hardware, software, and system performance are described.

Miscibility and interactions of animal and plant sterols with choline plasmalogen in binary and multicomponent model systems.

PubMed

Hąc-Wydro, Katarzyna; Luty, Katarzyna

2014-04-01

In this work miscibility and interactions of sterols with choline plasmalogen (PC-plasm) in Langmuir monolayers were studied. Moreover, the properties of cholesterol/phosphatidylcholine/plasmalogen mixtures of different PC-plasm concentration were investigated. The foregoing systems were treated as a model of cancer cell membranes, which are of higher plasmalogen level than normal cells. Finally, the influence of β-sitosterol and stigmasterol (phytosterols differing in anticancer potency) on these mixtures was verified. The properties of monolayers were analyzed based on the parameters derived from the surface pressure-area isotherms and images taken with Brewster Angle Microscope. It was found that at 30% of sterol in sterol/plasmalogen monolayer the lipids are immiscible and 3D crystallites are formed within the film. Cholesterol molecules mix favorably with PC-plasm at Xchol ≥ 0.5, while the investigated phytosterols only at their prevailing proportion in binary system. The increase of choline plasmalogen in cholesterol/phosphatidylcholine monolayer causes destabilization of the system. Moreover, the incorporation of phytosterols into cholesterol/phosphatidylcholine+PC-plasm mixtures disturbed membrane morphology and this effect was stronger for β-sitosterol as compared to stigmasterol. It was concluded that the presence of vinyl ether bond at sn-1 position in PC-plasm molecule strongly affects miscibility of choline plasmalogen with sterols. The comparison of the collected data with those reported in literature allowed one to conclude that miscibility and interactions of sterols with PC-plasm are less favorable than those with phosphatidylcholine. It was also suggested that overexpression of plasmalogens in cancer cell membranes may be a factor differentiating sensitivity of cells to anticancer effect of phytosterols. Copyright © 2014 Elsevier B.V. All rights reserved.

Effective use of principal component analysis with high resolution remote sensing data to delineate hydrothermal alteration and carbonate rocks

NASA Technical Reports Server (NTRS)

Feldman, Sandra C.

1987-01-01

Methods of applying principal component (PC) analysis to high resolution remote sensing imagery were examined. Using Airborne Imaging Spectrometer (AIS) data, PC analysis was found to be useful for removing the effects of albedo and noise and for isolating the significant information on argillic alteration, zeolite, and carbonate minerals. An effective technique for using PC analysis using an input the first 16 AIS bands, 7 intermediate bands, and the last 16 AIS bands from the 32 flat field corrected bands between 2048 and 2337 nm. Most of the significant mineralogical information resided in the second PC. PC color composites and density sliced images provided a good mineralogical separation when applied to a AIS data set. Although computer intensive, the advantage of PC analysis is that it employs algorithms which already exist on most image processing systems.

ART-Ada design project, phase 2

NASA Technical Reports Server (NTRS)

Lee, S. Daniel; Allen, Bradley P.

1990-01-01

Interest in deploying expert systems in Ada has increased. An Ada based expert system tool is described called ART-Ada, which was built to support research into the language and methodological issues of expert systems in Ada. ART-Ada allows applications of an existing expert system tool called ART-IM (Automated Reasoning Tool for Information Management) to be deployed in various Ada environments. ART-IM, a C-based expert system tool, is used to generate Ada source code which is compiled and linked with an Ada based inference engine to produce an Ada executable image. ART-Ada is being used to implement several expert systems for NASA's Space Station Freedom Program and the U.S. Air Force.

Implementation of RS-485 Communication between PLC and PC of Distributed Control System Based on VB

NASA Astrophysics Data System (ADS)

Lian Zhang, Chuan; Da Huang, Zhi; Qing Zhou, Gui; Chong, Kil To

2015-05-01

This paper focuses on achieving RS-485 communication between programmable logical controller (PLC) and PC based on visual basic 6.0 (VB6.0) on an experimental automatic production line. Mitsubishi FX2N PLCs and a PC are chosen as slave stations and main station, respectively. Monitoring software is developed using VB6.0 for data input/output, flow control and online parameters setting. As a result, all functions are fulfilled with robust performance. It is concluded from results that one PC can monitor several PLCs using RS-485 communication.

A neural network architecture for implementation of expert systems for real time monitoring

NASA Technical Reports Server (NTRS)

Ramamoorthy, P. A.

1991-01-01

Since neural networks have the advantages of massive parallelism and simple architecture, they are good tools for implementing real time expert systems. In a rule based expert system, the antecedents of rules are in the conjunctive or disjunctive form. We constructed a multilayer feedforward type network in which neurons represent AND or OR operations of rules. Further, we developed a translator which can automatically map a given rule base into the network. Also, we proposed a new and powerful yet flexible architecture that combines the advantages of both fuzzy expert systems and neural networks. This architecture uses the fuzzy logic concepts to separate input data domains into several smaller and overlapped regions. Rule-based expert systems for time critical applications using neural networks, the automated implementation of rule-based expert systems with neural nets, and fuzzy expert systems vs. neural nets are covered.

A Mobile Computing Solution for Collecting Functional Analysis Data on a Pocket PC

ERIC Educational Resources Information Center

Jackson, James; Dixon, Mark R.

2007-01-01

The present paper provides a task analysis for creating a computerized data system using a Pocket PC and Microsoft Visual Basic. With Visual Basic software and any handheld device running the Windows MOBLE operating system, this task analysis will allow behavior analysts to program and customize their own functional analysis data-collection…

Electronic structure, transport, and collective effects in molecular layered systems.

PubMed

Hahn, Torsten; Ludwig, Tim; Timm, Carsten; Kortus, Jens

2017-01-01

The great potential of organic heterostructures for organic device applications is exemplified by the targeted engineering of the electronic properties of phthalocyanine-based systems. The transport properties of two different phthalocyanine systems, a pure copper phthalocyanine (CoPc) and a flourinated copper phthalocyanine-manganese phthalocyanine (F 16 CoPc/MnPc) heterostructure, are investigated by means of density functional theory (DFT) and the non-equilibrium Green's function (NEGF) approach. Furthermore, a master-equation-based approach is used to include electronic correlations beyond the mean-field-type approximation of DFT. We describe the essential theoretical tools to obtain the parameters needed for the master equation from DFT results. Finally, an interacting molecular monolayer is considered within a master-equation approach.

PC-CUBE: A Personal Computer Based Hypercube

NASA Technical Reports Server (NTRS)

Ho, Alex; Fox, Geoffrey; Walker, David; Snyder, Scott; Chang, Douglas; Chen, Stanley; Breaden, Matt; Cole, Terry

1988-01-01

PC-CUBE is an ensemble of IBM PCs or close compatibles connected in the hypercube topology with ordinary computer cables. Communication occurs at the rate of 115.2 K-band via the RS-232 serial links. Available for PC-CUBE is the Crystalline Operating System III (CrOS III), Mercury Operating System, CUBIX and PLOTIX which are parallel I/O and graphics libraries. A CrOS performance monitor was developed to facilitate the measurement of communication and computation time of a program and their effects on performance. Also available are CXLISP, a parallel version of the XLISP interpreter; GRAFIX, some graphics routines for the EGA and CGA; and a general execution profiler for determining execution time spent by program subroutines. PC-CUBE provides a programming environment similar to all hypercube systems running CrOS III, Mercury and CUBIX. In addition, every node (personal computer) has its own graphics display monitor and storage devices. These allow data to be displayed or stored at every processor, which has much instructional value and enables easier debugging of applications. Some application programs which are taken from the book Solving Problems on Concurrent Processors (Fox 88) were implemented with graphics enhancement on PC-CUBE. The applications range from solving the Mandelbrot set, Laplace equation, wave equation, long range force interaction, to WaTor, an ecological simulation.

VENTURE/PC manual: A multidimensional multigroup neutron diffusion code system. Version 3

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shapiro, A.; Huria, H.C.; Cho, K.W.

1991-12-01

VENTURE/PC is a recompilation of part of the Oak Ridge BOLD VENTURE code system, which will operate on an IBM PC or compatible computer. Neutron diffusion theory solutions are obtained for multidimensional, multigroup problems. This manual contains information associated with operating the code system. The purpose of the various modules used in the code system, and the input for these modules are discussed. The PC code structure is also given. Version 2 included several enhancements not given in the original version of the code. In particular, flux iterations can be done in core rather than by reading and writing tomore » disk, for problems which allow sufficient memory for such in-core iterations. This speeds up the iteration process. Version 3 does not include any of the special processors used in the previous versions. These special processors utilized formatted input for various elements of the code system. All such input data is now entered through the Input Processor, which produces standard interface files for the various modules in the code system. In addition, a Standard Interface File Handbook is included in the documentation which is distributed with the code, to assist in developing the input for the Input Processor.« less

A PC-based multispectral scanner data evaluation workstation: Application to Daedalus scanners

NASA Technical Reports Server (NTRS)

Jedlovec, Gary J.; James, Mark W.; Smith, Matthew R.; Atkinson, Robert J.

1991-01-01

In late 1989, a personal computer (PC)-based data evaluation workstation was developed to support post flight processing of Multispectral Atmospheric Mapping Sensor (MAMS) data. The MAMS Quick View System (QVS) is an image analysis and display system designed to provide the capability to evaluate Daedalus scanner data immediately after an aircraft flight. Even in its original form, the QVS offered the portability of a personal computer with the advanced analysis and display features of a mainframe image analysis system. It was recognized, however, that the original QVS had its limitations, both in speed and processing of MAMS data. Recent efforts are presented that focus on overcoming earlier limitations and adapting the system to a new data tape structure. In doing so, the enhanced Quick View System (QVS2) will accommodate data from any of the four spectrometers used with the Daedalus scanner on the NASA ER2 platform. The QVS2 is designed around the AST 486/33 MHz CPU personal computer and comes with 10 EISA expansion slots, keyboard, and 4.0 mbytes of memory. Specialized PC-McIDAS software provides the main image analysis and display capability for the system. Image analysis and display of the digital scanner data is accomplished with PC-McIDAS software.

What Is An Expert System? ERIC Digest.

ERIC Educational Resources Information Center

Boss, Richard W.

This digest describes and defines the various components of an expert system, e.g., a computerized tool designed to enhance the quality and availability of knowledge required by decision makers. It is noted that expert systems differ from conventional applications software in the following areas: (1) the existence of the expert systems shell, or…

Rhetorical Consequences of the Computer Society: Expert Systems and Human Communication.

ERIC Educational Resources Information Center

Skopec, Eric Wm.

Expert systems are computer programs that solve selected problems by modelling domain-specific behaviors of human experts. These computer programs typically consist of an input/output system that feeds data into the computer and retrieves advice, an inference system using the reasoning and heuristic processes of human experts, and a knowledge…

Expert Systems: A Challenge for the Reading Profession.

ERIC Educational Resources Information Center

Balajthy, Ernest

The expert systems are designed to imitate the reasoning of a human expert in a content area field. Designed to be advisors, these software systems combine the content area knowledge and decision-making ability of an expert with the user's understanding and knowledge of particular circumstances. The reading diagnosis system, the RD2P System…

Expert Systems: Implications for the Diagnosis and Treatment of Learning Disabilities.

ERIC Educational Resources Information Center

Hofmeister, Alan M.; Lubke, Margaret M.

1988-01-01

The article examines characteristics and present or potential applications of expert systems technology for diagnosis and treatment of learning disabilities. Preliminary findings indicate that expert systems can perform as well as humans in specific areas, and that the process of organizing knowledge bases for expert systems helps clarify existing…

Key technology research of HILS based on real-time operating system

NASA Astrophysics Data System (ADS)

Wang, Fankai; Lu, Huiming; Liu, Che

2018-03-01

In order to solve the problems that the long development cycle of traditional simulation and digital simulation doesn't have the characteristics of real time, this paper designed a HILS(Hardware In the Loop Simulation) system based on the real-time operating platform xPC. This system solved the communication problems between HMI and Simulink models through the MATLAB engine interface, and realized the functions of system setting, offline simulation, model compiling and downloading, etc. Using xPC application interface and integrating the TeeChart ActiveX chart component to realize the monitoring function of real-time target application; Each functional block in the system is encapsulated in the form of DLL, and the data interaction between modules was realized by MySQL database technology. When the HILS system runs, search the address of the online xPC target by means of the Ping command, to establish the Tcp/IP communication between the two machines. The technical effectiveness of the developed system is verified through the typical power station control system.

A Comparative Study of Probability Collectives Based Multi-agent Systems and Genetic Algorithms

NASA Technical Reports Server (NTRS)

Huang, Chien-Feng; Wolpert, David H.; Bieniawski, Stefan; Strauss, Charles E. M.

2005-01-01

We compare Genetic Algorithms (GA's) with Probability Collectives (PC), a new framework for distributed optimization and control. In contrast to GA's, PC-based methods do not update populations of solutions. Instead they update an explicitly parameterized probability distribution p over the space of solutions. That updating of p arises as the optimization of a functional of p. The functional is chosen so that any p that optimizes it should be p peaked about good solutions. The PC approach works in both continuous and discrete problems. It does not suffer from the resolution limitation of the finite bit length encoding of parameters into GA alleles. It also has deep connections with both game theory and statistical physics. We review the PC approach using its motivation as the information theoretic formulation of bounded rationality for multi-agent systems. It is then compared with GA's on a diverse set of problems. To handle high dimensional surfaces, in the PC method investigated here p is restricted to a product distribution. Each distribution in that product is controlled by a separate agent. The test functions were selected for their difficulty using either traditional gradient descent or genetic algorithms. On those functions the PC-based approach significantly outperforms traditional GA's in both rate of descent, trapping in false minima, and long term optimization.

Curcumin AntiCancer Studies in Pancreatic Cancer.

PubMed

Bimonte, Sabrina; Barbieri, Antonio; Leongito, Maddalena; Piccirillo, Mauro; Giudice, Aldo; Pivonello, Claudia; de Angelis, Cristina; Granata, Vincenza; Palaia, Raffaele; Izzo, Francesco

2016-07-16

Pancreatic cancer (PC) is one of the deadliest cancers worldwide. Surgical resection remains the only curative therapeutic treatment for this disease, although only the minority of patients can be resected due to late diagnosis. Systemic gemcitabine-based chemotherapy plus nab-paclitaxel are used as the gold-standard therapy for patients with advanced PC; although this treatment is associated with a better overall survival compared to the old treatment, many side effects and poor results are still present. Therefore, new alternative therapies have been considered for treatment of advanced PC. Several preclinical studies have demonstrated that curcumin, a naturally occurring polyphenolic compound, has anticancer effects against different types of cancer, including PC, by modulating many molecular targets. Regarding PC, in vitro studies have shown potent cytotoxic effects of curcumin on different PC cell lines including MiaPaCa-2, Panc-1, AsPC-1, and BxPC-3. In addition, in vivo studies on PC models have shown that the anti-proliferative effects of curcumin are caused by the inhibition of oxidative stress and angiogenesis and are due to the induction of apoptosis. On the basis of these results, several researchers tested the anticancer effects of curcumin in clinical trials, trying to overcome the poor bioavailability of this agent by developing new bioavailable forms of curcumin. In this article, we review the results of pre-clinical and clinical studies on the effects of curcumin in the treatment of PC.

Down-regulation of polycystin in lymphatic malformations: possible role in the proliferation of lymphatic endothelial cells.

PubMed

Ren, Jian-Gang; Xia, Hou-Fu; Yang, Jie-Gang; Zhu, Jun-Yi; Zhang, Wei; Chen, Gang; Zhao, Ji-Hong; Sun, Yan-Fang; Zhao, Yi-Fang

2017-07-01

Lymphatic malformations (LMs) are composed of aberrant lymphatic vessels and regarded as benign growths of the lymphatic system. Recent studies have demonstrated that the mutant embryos of PKD1 and PKD2, encoding polycystin-1 (PC-1) and polycystin-2 (PC-2), respectively, result in aberrant lymphatic vessels similar to those observed in LMs. In this study, for the first time, we investigated PC-1 and PC-2 expression and assessed their roles in the development of LMs. Our results demonstrated that PC-1 and PC-2 gene and protein expressions were obviously decreased in LMs compared with normal skin tissues. In addition, the expression of phosphorylated ERK but not total ERK was up-regulated in LMs and negatively correlated with the expression of PC-1 and PC-2. Moreover, up-regulation of Ki67 was detected in LMs and positively correlated with ERK phosphorylation levels. Furthermore, cluster analysis better reflected close correlation between these signals. All of the above results provided strong evidence suggesting that the hyperactivation of the ERK pathway may be caused by down-regulation of PC-1 and PC-2 in LMs, contributing to increased proliferation of lymphatic endothelial cells in LMs. Our present study sheds light on novel potential mechanisms involved in LMs and may help to explore novel treatments for LMs. Copyright © 2017 Elsevier Inc. All rights reserved.

Curcumin AntiCancer Studies in Pancreatic Cancer

PubMed Central

Bimonte, Sabrina; Barbieri, Antonio; Leongito, Maddalena; Piccirillo, Mauro; Giudice, Aldo; Pivonello, Claudia; de Angelis, Cristina; Granata, Vincenza; Palaia, Raffaele; Izzo, Francesco

2016-01-01

Pancreatic cancer (PC) is one of the deadliest cancers worldwide. Surgical resection remains the only curative therapeutic treatment for this disease, although only the minority of patients can be resected due to late diagnosis. Systemic gemcitabine-based chemotherapy plus nab-paclitaxel are used as the gold-standard therapy for patients with advanced PC; although this treatment is associated with a better overall survival compared to the old treatment, many side effects and poor results are still present. Therefore, new alternative therapies have been considered for treatment of advanced PC. Several preclinical studies have demonstrated that curcumin, a naturally occurring polyphenolic compound, has anticancer effects against different types of cancer, including PC, by modulating many molecular targets. Regarding PC, in vitro studies have shown potent cytotoxic effects of curcumin on different PC cell lines including MiaPaCa-2, Panc-1, AsPC-1, and BxPC-3. In addition, in vivo studies on PC models have shown that the anti-proliferative effects of curcumin are caused by the inhibition of oxidative stress and angiogenesis and are due to the induction of apoptosis. On the basis of these results, several researchers tested the anticancer effects of curcumin in clinical trials, trying to overcome the poor bioavailability of this agent by developing new bioavailable forms of curcumin. In this article, we review the results of pre-clinical and clinical studies on the effects of curcumin in the treatment of PC. PMID:27438851

PC-based automation system streamlines operations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bowman, J.

1995-10-01

The continued emergence of PC-based automation systems in the modern compressor station is driving the need for personnel who have the special skills need to support them. However, the dilemma is that operating budget restraints limit the overall number of people available to operate and maintain compressor stations. An ideal solution is to deploy automation systems which can be easily understood and supported by existing compressor station personnel. This paper reviews such a system developed by Waukesha-Pearce Industries, Inc.

Design of an Ada expert system shell for the VHSIC avionic modular flight processor

NASA Technical Reports Server (NTRS)

Fanning, F. Jesse

1992-01-01

The Embedded Computer System Expert System Shell (ES Shell) is an Ada-based expert system shell developed at the Avionics Laboratory for use on the VHSIC Avionic Modular Processor (VAMP) running under the Ada Avionics Real-Time Software (AARTS) Operating System. The ES Shell provides the interface between the expert system and the avionics environment, and controls execution of the expert system. Testing of the ES Shell in the Avionics Laboratory's Integrated Test Bed (ITB) has demonstrated its ability to control a non-deterministic software application executing on the VAMP's which can control the ITB's real-time closed-loop aircraft simulation. The results of these tests and the conclusions reached in the design and development of the ES Shell have played an important role in the formulation of the requirements for a production-quality expert system inference engine, an ingredient necessary for the successful use of expert systems on the VAMP embedded avionic flight processor.

The need for a comprehensive expert system development methodology

NASA Technical Reports Server (NTRS)

Baumert, John; Critchfield, Anna; Leavitt, Karen

1988-01-01

In a traditional software development environment, the introduction of standardized approaches has led to higher quality, maintainable products on the technical side and greater visibility into the status of the effort on the management side. This study examined expert system development to determine whether it differed enough from traditional systems to warrant a reevaluation of current software development methodologies. Its purpose was to identify areas of similarity with traditional software development and areas requiring tailoring to the unique needs of expert systems. A second purpose was to determine whether existing expert system development methodologies meet the needs of expert system development, management, and maintenance personnel. The study consisted of a literature search and personal interviews. It was determined that existing methodologies and approaches to developing expert systems are not comprehensive nor are they easily applied, especially to cradle to grave system development. As a result, requirements were derived for an expert system development methodology and an initial annotated outline derived for such a methodology.

Validation of an expert system intended for research in distributed artificial intelligence

NASA Technical Reports Server (NTRS)

Grossner, C.; Lyons, J.; Radhakrishnan, T.

1991-01-01

The expert system discussed in this paper is designed to function as a testbed for research on cooperating expert systems. Cooperating expert systems are members of an organization which dictates the manner in which the expert systems will interact when solving a problem. The Blackbox Expert described in this paper has been constructed using the C Language Integrated Production System (CLIPS), C++, and X windowing environment. CLIPS is embedded in a C++ program which provides objects that are used to maintain the state of the Blackbox puzzle. These objects are accessed by CLIPS rules through user-defined functions calls. The performance of the Blackbox Expert is validated by experimentation. A group of people are asked to solve a set of test cases for the Blackbox puzzle. A metric has been devised which evaluates the 'correctness' of a solution proposed for a test case of Blackbox. Using this metric and the solutions proposed by the humans, each person receives a rating for their ability to solve the Blackbox puzzle. The Blackbox Expert solves the same set of test cases and is assigned a rating for its ability. Then the rating obtained by the Blackbox Expert is compared with the ratings of the people, thus establishing the skill level of our expert system.

Autonomous power system brassboard

NASA Technical Reports Server (NTRS)

Merolla, Anthony

1992-01-01

The Autonomous Power System (APS) brassboard is a 20 kHz power distribution system which has been developed at NASA Lewis Research Center, Cleveland, Ohio. The brassboard exists to provide a realistic hardware platform capable of testing artificially intelligent (AI) software. The brassboard's power circuit topology is based upon a Power Distribution Control Unit (PDCU), which is a subset of an advanced development 20 kHz electrical power system (EPS) testbed, originally designed for Space Station Freedom (SSF). The APS program is designed to demonstrate the application of intelligent software as a fault detection, isolation, and recovery methodology for space power systems. This report discusses both the hardware and software elements used to construct the present configuration of the brassboard. The brassboard power components are described. These include the solid-state switches (herein referred to as switchgear), transformers, sources, and loads. Closely linked to this power portion of the brassboard is the first level of embedded control. Hardware used to implement this control and its associated software is discussed. An Ada software program, developed by Lewis Research Center's Space Station Freedom Directorate for their 20 kHz testbed, is used to control the brassboard's switchgear, as well as monitor key brassboard parameters through sensors located within these switches. The Ada code is downloaded from a PC/AT, and is resident within the 8086 microprocessor-based embedded controllers. The PC/AT is also used for smart terminal emulation, capable of controlling the switchgear as well as displaying data from them. Intelligent control is provided through use of a T1 Explorer and the Autonomous Power Expert (APEX) LISP software. Real-time load scheduling is implemented through use of a 'C' program-based scheduling engine. The methods of communication between these computers and the brassboard are explored. In order to evaluate the features of both the brassboard hardware and intelligent controlling software, fault circuits have been developed and integrated as part of the brassboard. A description of these fault circuits and their function is included. The brassboard has become an extremely useful test facility, promoting artificial intelligence (AI) applications for power distribution systems. However, there are elements of the brassboard which could be enhanced, thus improving system performance. Modifications and enhancements to improve the brassboard's operation are discussed.

Photolithography diagnostic expert systems: a systematic approach to problem solving in a wafer fabrication facility

NASA Astrophysics Data System (ADS)

Weatherwax Scott, Caroline; Tsareff, Christopher R.

1990-06-01

One of the main goals of process engineering in the semiconductor industry is to improve wafer fabrication productivity and throughput. Engineers must work continuously toward this goal in addition to performing sustaining and development tasks. To accomplish these objectives, managers must make efficient use of engineering resources. One of the tools being used to improve efficiency is the diagnostic expert system. Expert systems are knowledge based computer programs designed to lead the user through the analysis and solution of a problem. Several photolithography diagnostic expert systems have been implemented at the Hughes Technology Center to provide a systematic approach to process problem solving. This systematic approach was achieved by documenting cause and effect analyses for a wide variety of processing problems. This knowledge was organized in the form of IF-THEN rules, a common structure for knowledge representation in expert system technology. These rules form the knowledge base of the expert system which is stored in the computer. The systems also include the problem solving methodology used by the expert when addressing a problem in his area of expertise. Operators now use the expert systems to solve many process problems without engineering assistance. The systems also facilitate the collection of appropriate data to assist engineering in solving unanticipated problems. Currently, several expert systems have been implemented to cover all aspects of the photolithography process. The systems, which have been in use for over a year, include wafer surface preparation (HMDS), photoresist coat and softbake, align and expose on a wafer stepper, and develop inspection. These systems are part of a plan to implement an expert system diagnostic environment throughout the wafer fabrication facility. In this paper, the systems' construction is described, including knowledge acquisition, rule construction, knowledge refinement, testing, and evaluation. The roles played by the process engineering expert and the knowledge engineer are discussed. The features of the systems are shown, particularly the interactive quality of the consultations and the ease of system use.

MOORE: A prototype expert system for diagnosing spacecraft problems

NASA Technical Reports Server (NTRS)

Howlin, Katherine; Weissert, Jerry; Krantz, Kerry

1988-01-01

MOORE is a rule-based, prototype expert system that assists in diagnosing operational Tracking and Data Relay Satellite (TDRS) problems. It is intended to assist spacecraft engineers at the TDRS ground terminal in trouble shooting problems that are not readily solved with routine procedures, and without expert counsel. An additional goal of the prototype system is to develop in-house expert system and knowledge engineering skills. The prototype system diagnoses antenna pointing and earth pointing problems that may occur within the TDRS Attitude Control System (ACS). Plans include expansion to fault isolation of problems in the most critical subsystems of the TDRS spacecraft. Long term benefits are anticipated with use of an expert system during future TDRS programs with increased mission support time, reduced problem solving time, and retained expert knowledge and experience. Phase 2 of the project is intended to provide NASA the necessary expertise and capability to define requirements, evaluate proposals, and monitor the development progress of a highly competent expert system for NASA's Tracking Data Relay Satellite. Phase 2 also envisions addressing two unexplored applications for expert systems, spacecraft integration and tests (I and T) and support to launch activities. The concept, goals, domain, tools, knowledge acquisition, developmental approach, and design of the expert system. It will explain how NASA obtained the knowledge and capability to develop the system in-house without assistance from outside consultants. Future plans will also be presented.

Phthalocyanines functionalized with 2-methyl-5-nitro-1H-imidazolylethoxy and 1,4,7-trioxanonyl moieties and the effect of metronidazole substitution on photocytotoxicity.

PubMed

Wierzchowski, Marcin; Sobotta, Lukasz; Skupin-Mrugalska, Paulina; Kruk, Justyna; Jusiak, Weronika; Yee, Michael; Konopka, Krystyna; Düzgüneş, Nejat; Tykarska, Ewa; Gdaniec, Maria; Mielcarek, Jadwiga; Goslinski, Tomasz

2013-10-01

Four novel magnesium(II) and zinc(II) phthalocyanines bearing 1,4,7-trioxanonyl, polyether and/or (2-methyl-5-nitro-1H-imidazol-1-yl)ethoxy, heterocyclic substituents at their non-peripheral positions were synthesized and assessed in terms of physicochemical and biological properties. Magnesium phthalocyanine derivatives bearing polyether substituents (Pc-1), a mixed system of polyether and heterocyclic substituents (Pc-3), and four heterocyclic substituents (Pc-4), respectively, were synthesized following the Linstead macrocyclization reaction procedure. Zinc phthalocyanine (Pc-2) bearing polyether substituents at non-peripheral positions was synthesized following the procedure in n-pentanol with the zinc acetate, and DBU. Novel phthalocyanines were purified by flash column chromatography and characterized using NMR, MS, UV-Vis and HPLC. Moreover, two precursors in macrocyclization reaction phthalonitriles were characterized using X-ray. Photophysical properties of the novel macrocycles were evaluated, including UV-Vis spectra analysis and aggregation study. All macrocycles subjected to singlet oxygen generation and the oxidation rate constant measurements exhibited lower quantum yields of singlet oxygen generation in DMSO than in DMF. In addition, the Pc-2 molecule was found to be the most efficient singlet oxygen generator from the group of macrocycles studied. The photocytotoxicity evaluated on the human oral squamous cell carcinoma cell line, HSC-3, for Pc-3 was significantly higher than that for Pc-1, Pc-2, and Pc-4. Interestingly, Pc-3 was found to be the most active macrocycle in vitro although its ability to generate singlet oxygen was significantly lower than those of Pc-1 and Pc-2. However, attempts to encapsulate phthalocyanines Pc-1-Pc-3 in liposomal membranes were unsuccessful. The phthalocyanine-nitroimidazole conjugate, Pc-4 was encapsulated in phosphatidylglycerol:phosphatidylcholine unilamellar liposomes and subjected to photocytotoxicity study. © 2013.

Cognitive versus Software-Assisted Registration: Development of a New Nomogram Predicting Prostate Cancer at MRI-Targeted Biopsies.

PubMed

Kaufmann, Sascha; Russo, Giorgio I; Thaiss, Wolfgang; Notohamiprodjo, Mike; Bamberg, Fabian; Bedke, Jens; Morgia, Giuseppe; Nikolaou, Konstantin; Stenzl, Arnulf; Kruck, Stephan

2018-04-03

Multiparametric magnetic resonance imaging (mpMRI) is gaining acceptance to guide targeted biopsy (TB) in prostate cancer (PC) diagnosis. We aimed to compare the detection rate of software-assisted fusion TB (SA-TB) versus cognitive fusion TB (COG-TB) for PC and to evaluate potential clinical features in detecting PC and clinically significant PC (csPC) at TB. This was a retrospective cohort study of patients with rising and/or persistently elevated prostate-specific antigen (PSA) undergoing mpMRI followed by either transperineal SA-TB or transrectal COG-TB. The analysis showed a matched-paired analysis between SA-TB versus COG-TB without differences in clinical or radiological characteristics. Differences among detection of PC/csPC among groups were analyzed. A multivariable logistic regression model predicting PC at TB was fitted. The model was evaluated using the receiver operating characteristic-derived area under the curve, goodness of fit test, and decision-curve analyses. One hundred ninety-one and 87 patients underwent SA-TB or COG-TB, respectively. The multivariate logistic analysis showed that SA-TB was associated with overall PC (odds ratio [OR], 5.70; P < .01) and PC at TB (OR, 3.00; P < .01) but not with overall csPC (P = .40) and csPC at TB (P = .40). A nomogram predicting PC at TB was constructed using the Prostate Imaging Reporting and Data System version 2.0, age, PSA density and biopsy technique, showing improved clinical risk prediction against a threshold probability of 10% with a c-index of 0.83. In patients with suspected PC, software-assisted biopsy detects most cancers and outperforms the cognitive approach in targeting magnetic resonance imaging-visible lesions. Furthermore, we introduced a prebiopsy nomogram for the probability of PC in TB. Copyright © 2018 Elsevier Inc. All rights reserved.

A novel matrix dispersion based on phospholipid complex for improving oral bioavailability of baicalein: preparation, in vitro and in vivo evaluations.

PubMed

Zhou, Yang; Dong, Wujun; Ye, Jun; Hao, Huazhen; Zhou, Junzhuo; Wang, Renyun; Liu, Yuling

2017-11-01

Phospholipid complex is one of the most successful approaches for enhancing oral bioavailability of poorly absorbed plant constituents. But the sticky property of phospholipids results in an unsatisfactory dissolution of drugs. In this study, a matrix dispersion of baicalein based on phospholipid complex (BaPC-MD) was first prepared by a discontinuous solvent evaporation method, in which polyvinylpyrrolidone-K30 (PVP-K30) was employed for improving the dispersibility of baicalein phospholipid complex (BaPC) and increasing dissolution of baicalein. The combination ratio of baicalein and phospholipids in BaPC-MD was 99.39% and baicalein was still in a complete complex state with phospholipid in BaPC-MD. Differential scanning calorimetry (DSC), X-ray diffraction (XRD), scanning electron microscopy (SEM) and Fourier Transform Infrared (FTIR) analyzes demonstrated that baicalein was fully transformed to an amorphous state in BaPC-MD and phospholipid complex formed. The water-solubility and n-octanol solubility of baicalein in BaPC-MD significantly increased compared with those of pure baicalein. Compared with baicalein and BaPC, the cumulative dissolution of BaPC-MD at 120 min increased 2.77- and 1.23-fold, respectively. In vitro permeability study in Caco-2 cells indicated that the permeability of BaPC-MD was remarkably higher than those of baicalein and BaPC. Pharmacokinetic study showed that the average C max of BaPC-MD was significantly increased compared to baicalein and BaPC. AUC 0-14 h of BaPC-MD was 5.01- and 1.91-fold of baicalein and BaPC, respectively. The novel BaPC-MD significantly enhanced the oral bioavailability of baicalein by improving the dissolution and permeability of baicalein without destroying the complexation state of baicalein and phospholipids. The current drug delivery system provided an optimal strategy to significantly enhance oral bioavailability for poorly water-soluble drugs.

Modeling the interactions of phthalocyanines in water: from the Cu(II)-tetrasulphonate to the metal-free phthalocyanine.

PubMed

Martín, Elisa I; Martínez, Jose M; Sánchez Marcos, Enrique

2011-01-14

A quantum and statistical study on the effects of the ions Cu(2+) and SO(3)(-) in the solvent structure around the metal-free phthalocyanine (H(2)Pc) is presented. We developed an ab initio interaction potential for the system CuPc-H(2)O based on quantum chemical calculations and studied its transferability to the H(2)Pc-H(2)O and [CuPc(SO(3))(4)](4-)-H(2)O interactions. The use of the molecular dynamics technique allows the determination of energetic and structural properties of CuPc, H(2)Pc, and [CuPc(SO(3))(4)](4-) in water and the understanding of the keys for the different behaviors of the three phthalocyanine (Pc) derivatives in water. The inclusion of the Cu(2+) cation in the Pc structure reinforces the appearance of two axial water molecules and second-shell water molecules in the solvent structure, whereas the presence of SO(3)(-) anions implies a well defined hydration shell of about eight water molecules around them making the macrocycle soluble in water. Debye-Waller factors for axial water molecules have been obtained in order to examine the potential sensitivity of the extended x-ray absorption fine structure technique to detect the axial water molecules.

Phthalocyanine-nanocarbon ensembles: from discrete molecular and supramolecular systems to hybrid nanomaterials.

PubMed

Bottari, Giovanni; de la Torre, Gema; Torres, Tomas

2015-04-21

Phthalocyanines (Pcs) are macrocyclic and aromatic compounds that present unique electronic features such as high molar absorption coefficients, rich redox chemistry, and photoinduced energy/electron transfer abilities that can be modulated as a function of the electronic character of their counterparts in donor-acceptor (D-A) ensembles. In this context, carbon nanostructures such as fullerenes, carbon nanotubes (CNTs), and, more recently, graphene are among the most suitable Pc "companions". Pc-C60 ensembles have been for a long time the main actors in this field, due to the commercial availability of C60 and the well-established synthetic methods for its functionalization. As a result, many Pc-C60 architectures have been prepared, featuring different connectivities (covalent or supramolecular), intermolecular interactions (self-organized or molecularly dispersed species), and Pc HOMO/LUMO levels. All these elements provide a versatile toolbox for tuning the photophysical properties in terms of the type of process (photoinduced energy/electron transfer), the nature of the interactions between the electroactive units (through bond or space), and the kinetics of the formation/decay of the photogenerated species. Some recent trends in this field include the preparation of stimuli-responsive multicomponent systems with tunable photophysical properties and highly ordered nanoarchitectures and surface-supported systems showing high charge mobilities. A breakthrough in the Pc-nanocarbon field was the appearance of CNTs and graphene, which opened a new avenue for the preparation of intriguing photoresponsive hybrid ensembles showing light-stimulated charge separation. The scarce solubility of these 1-D and 2-D nanocarbons, together with their lower reactivity with respect to C60 stemming from their less strained sp(2) carbon networks, has not meant an unsurmountable limitation for the preparation of variety of Pc-based hybrids. These systems, which show improved solubility and dispersibility features, bring together the unique electronic transport properties of CNTs and graphene with the excellent light-harvesting and tunable redox properties of Pcs. A singular and distinctive feature of these Pc-CNT/graphene (single- or few-layers) hybrid materials is the control of the direction of the photoinduced charge transfer as a result of the band-like electronic structure of these carbon nanoforms and the adjustable electronic levels of Pcs. Moreover, these conjugates present intensified light-harvesting capabilities resulting from the grafting of several chromophores on the same nanocarbon platform. In this Account, recent progress in the construction of covalent and supramolecular Pc-nanocarbon ensembles is summarized, with a particular emphasis on their photoinduced behavior. We believe that the high degree of control achieved in the preparation of Pc-carbon nanostructures, together with the increasing knowledge of the factors governing their photophysics, will allow for the design of next-generation light-fueled electroactive systems. Possible implementation of these Pc-nanocarbons in high performance devices is envisioned, finally turning into reality much of the expectations generated by these materials.

Requirement of the Listeria monocytogenes broad-range phospholipase PC-PLC during infection of human epithelial cells.

PubMed

Gründling, Angelika; Gonzalez, Mark D; Higgins, Darren E

2003-11-01

In this study, we investigated the requirement of the Listeria monocytogenes broad-range phospholipase C (PC-PLC) during infection of human epithelial cells. L. monocytogenes is a facultative intracellular bacterial pathogen of humans and a variety of animal species. After entering a host cell, L. monocytogenes is initially surrounded by a membrane-bound vacuole. Bacteria promote their escape from this vacuole, grow within the host cell cytosol, and spread from cell to cell via actin-based motility. Most infection studies with L. monocytogenes have been performed with mouse cells or an in vivo mouse model of infection. In all mouse-derived cells tested, the pore-forming cytolysin listeriolysin O (LLO) is absolutely required for lysis of primary vacuoles formed during host cell entry. However, L. monocytogenes can escape from primary vacuoles in the absence of LLO during infection of human epithelial cell lines Henle 407, HEp-2, and HeLa. Previous studies have shown that the broad-range phospholipase C, PC-PLC, promotes lysis of Henle 407 cell primary vacuoles in the absence of LLO. Here, we have shown that PC-PLC is also required for lysis of HEp-2 and HeLa cell primary vacuoles in the absence of LLO expression. Furthermore, our results indicated that the amount of PC-PLC activity is critical for the efficiency of vacuolar lysis. In an LLO-negative derivative of L. monocytogenes strain 10403S, expression of PC-PLC has to increase before or upon entry into human epithelial cells, compared to expression in broth culture, to allow bacterial escape from primary vacuoles. Using a system for inducible PC-PLC expression in L. monocytogenes, we provide evidence that phospholipase activity can be increased by elevated expression of PC-PLC or Mpl, the enzyme required for proteolytic activation of PC-PLC. Lastly, by using the inducible PC-PLC expression system, we demonstrate that, in the absence of LLO, PC-PLC activity is not only required for lysis of primary vacuoles in human epithelial cells but is also necessary for efficient cell-to-cell spread. We speculate that the additional requirement for PC-PLC activity is for lysis of secondary double-membrane vacuoles formed during cell-to-cell spread.

Expert systems applied to spacecraft fire safety

NASA Technical Reports Server (NTRS)

Smith, Richard L.; Kashiwagi, Takashi

1989-01-01

Expert systems are problem-solving programs that combine a knowledge base and a reasoning mechanism to simulate a human expert. The development of an expert system to manage fire safety in spacecraft, in particular the NASA Space Station Freedom, is difficult but clearly advantageous in the long-term. Some needs in low-gravity flammability characteristics, ventilating-flow effects, fire detection, fire extinguishment, and decision models, all necessary to establish the knowledge base for an expert system, are discussed.

DOE Office of Scientific and Technical Information (OSTI.GOV)

MacAllister, D.J.; Day, R.; McCormack, M.D.

This paper gives an overview of a major integrated oil company`s experience with artificial intelligence (AI) over the last 5 years, with an emphasis on expert systems. The authors chronicle the development of an AI group, including details on development tool selection, project selection strategies, potential pitfalls, and descriptions of several completed expert systems. Small expert systems produced by teams of petroleum technology experts and experienced expert system developers that are focused in well-defined technical areas have produced substantial benefits and accelerated petroleum technology transfer.

An expert systems approach to automated fault management in a regenerative life support subsystem

NASA Technical Reports Server (NTRS)

Malin, J. T.; Lance, N., Jr.

1986-01-01

This paper describes FIXER, a prototype expert system for automated fault management in a regenerative life support subsystem typical of Space Station applications. The development project provided an evaluation of the use of expert systems technology to enhance controller functions in space subsystems. The software development approach permitted evaluation of the effectiveness of direct involvement of the expert in design and development. The approach also permitted intensive observation of the knowledge and methods of the expert. This paper describes the development of the prototype expert system and presents results of the evaluation.

A PC-based bus monitor program for use with the transport systems research vehicle RS-232 communication interfaces

NASA Technical Reports Server (NTRS)

Easley, Wesley C.

1991-01-01

Experiment critical use of RS-232 data busses in the Transport Systems Research Vehicle (TSRV) operated by the Advanced Transport Operating Systems Program Office at the NASA Langley Research Center has recently increased. Each application utilizes a number of nonidentical computer and peripheral configurations and requires task specific software development. To aid these development tasks, an IBM PC-based RS-232 bus monitoring system was produced. It can simultaneously monitor two communication ports of a PC or clone, including the nonstandard bus expansion of the TSRV Grid laptop computers. Display occurs in a separate window for each port's input with binary display being selectable. A number of other features including binary log files, screen capture to files, and a full range of communication parameters are provided.

A New PC and LabVIEW Package Based System for Electrochemical Investigations.

PubMed

Stević, Zoran; Andjelković, Zoran; Antić, Dejan

2008-03-15

The paper describes a new PC and LabVIEW software package based system forelectrochemical research. An overview of well known electrochemical methods, such aspotential measurements, galvanostatic and potentiostatic method, cyclic voltammetry andEIS is given. Electrochemical impedance spectroscopy has been adapted for systemscontaining large capacitances. For signal generation and recording of the response ofinvestigated electrochemical cell, a measurement and control system was developed, basedon a PC P4. The rest of the hardware consists of a commercially available AD-DA converterand an external interface for analog signal processing. The interface is a result of authorsown research. The software platform for desired measurement methods is LabVIEW 8.2package, which is regarded as a high standard in the area of modern virtual instruments. Thedeveloped system was adjusted, tested and compared with commercially available systemand ORCAD simulation.

Evolution of a research prototype expert system for endemic populations of mountain pine beetle in lodgepole pine forests

Treesearch

Dale L. Bartos; Kent B. Downing

1989-01-01

A knowledge acquisition program was written to aid in obtaining knowledge from the experts concerning endemic populations of mountain pine beetle in lodgepole pine forest. An application expert system is then automatically generated by the knowledge acquisition program that contains the codified base of expert knowledge. Data can then be entered into the expert system...

Tracing And Control Of Engineering Requirements

NASA Technical Reports Server (NTRS)

Turner, Philip R.; Stoller, Richard L.; Neville, Ted; Boyle, Karen A.

1991-01-01

TRACER (Tracing and Control of Engineering Requirements) is data-base/word-processing software system created to document and maintain order of both requirements and descriptions associated with engineering project. Implemented on IBM PC under PC-DOS. Written with CLIPPER.

[A skin cell segregating control system based on PC].

PubMed

Liu, Wen-zhong; Zhou, Ming; Zhang, Hong-bing

2005-11-01

A skin cell segregating control system based on PC (personal computer) is presented in this paper. Its front controller is a single-chip microcomputer which enables the manipulation for 6 patients simultaneously, and thus provides a great convenience for clinical treatments for vitiligo. With the use of serial port communication technology, it's possible to monitor and control the front controller in a PC terminal. And the application of computer image acquisition technology realizes the synchronous acquisition of pathologic shin cell images pre/after the operation and a case history. Clinical tests prove its conformity with national standards and the pre-set technological requirements.

An SSME High Pressure Oxidizer Turbopump diagnostic system using G2 real-time expert system

NASA Technical Reports Server (NTRS)

Guo, Ten-Huei

1991-01-01

An expert system which diagnoses various seal leakage faults in the High Pressure Oxidizer Turbopump of the SSME was developed using G2 real-time expert system. Three major functions of the software were implemented: model-based data generation, real-time expert system reasoning, and real-time input/output communication. This system is proposed as one module of a complete diagnostic system for the SSME. Diagnosis of a fault is defined as the determination of its type, severity, and likelihood. Since fault diagnosis is often accomplished through the use of heuristic human knowledge, an expert system based approach has been adopted as a paradigm to develop this diagnostic system. To implement this approach, a software shell which can be easily programmed to emulate the human decision process, the G2 Real-Time Expert System, was selected. Lessons learned from this implementation are discussed.

An SSME high pressure oxidizer turbopump diagnostic system using G2(TM) real-time expert system

NASA Technical Reports Server (NTRS)

Guo, Ten-Huei

1991-01-01

An expert system which diagnoses various seal leakage faults in the High Pressure Oxidizer Turbopump of the SSME was developed using G2(TM) real-time expert system. Three major functions of the software were implemented: model-based data generation, real-time expert system reasoning, and real-time input/output communication. This system is proposed as one module of a complete diagnostic system for Space Shuttle Main Engine. Diagnosis of a fault is defined as the determination of its type, severity, and likelihood. Since fault diagnosis is often accomplished through the use of heuristic human knowledge, an expert system based approach was adopted as a paradigm to develop this diagnostic system. To implement this approach, a software shell which can be easily programmed to emulate the human decision process, the G2 Real-Time Expert System, was selected. Lessons learned from this implementation are discussed.

Prion Protein Regulates Iron Transport by Functioning as a Ferrireductase

PubMed Central

Singh, Ajay; Haldar, Swati; Horback, Katharine; Tom, Cynthia; Zhou, Lan; Meyerson, Howard; Singh, Neena

2017-01-01

Prion protein (PrPC) is implicated in the pathogenesis of prion disorders, but its normal function is unclear. We demonstrate that PrPC is a ferrireductase (FR), and its absence causes systemic iron deficiency in PrP knock-out mice (PrP−/−). When exposed to non-transferrin-bound (NTB) radioactive-iron (59FeCl3) by gastric-gavage, PrP−/− mice absorb significantly more 59Fe from the intestinal lumen relative to controls, indicating appropriate systemic response to the iron deficiency. Chronic exposure to excess dietary iron corrects this deficiency, but unlike wild-type (PrP+/+) controls that remain iron over-loaded, PrP−/− mice revert back to the iron deficient phenotype after 5 months of chase on normal diet. Bone marrow (BM) preparations of PrP−/− mice on normal diet show relatively less stainable iron, and this phenotype is only partially corrected by intraperitoneal administration of excess iron-dextran. Cultured PrP−/− BM-macrophages incorporate significantly less NTB-59Fe in the absence or presence of excess extracellular iron, indicating reduced uptake and/or storage of available iron in the absence of PrPC. When expressed in neuroblastoma cells, PrPC exhibits NAD(P)H-dependent cell-surface and intracellular FR activity that requires the copper-binding octa-peptide-repeat region and linkage to the plasma membrane for optimal function. Incorporation of NTB-59Fe by neuroblastoma cells correlates with FR activity of PrPC, implicating PrPC in cellular iron uptake and metabolism. These observations explain the correlation between PrPC expression and cellular iron levels, and the cause of iron imbalance in sporadic-Creutzfeldt-Jakob-disease brains where PrPC accumulates as insoluble aggregates. PMID:23478311

Buffer-induced swelling and vesicle budding in binary lipid mixtures of dioleoylphosphatidylcholine:dioleoylphosphatidylethanolamine and dioleoylphosphatidylcholine:lysophosphatidylcholine using small-angle X-ray scattering and ³¹P static NMR.

PubMed

Barriga, Hanna M G; Bazin, Richard; Templer, Richard H; Law, Robert V; Ces, Oscar

2015-03-17

A large variety of data exists on lipid phase behavior; however, it is mostly in nonbuffered systems over nonbiological temperature ranges. We present biophysical data on lipid mixtures of dioleoylphosphatidylcholine (DOPC), dioleoylphosphatidylethanolamine (DOPE), and lysophosphatidylcholine (LysoPC) examining their behaviors in excess water and buffer systems over the temperature range 4-34 °C. These mixtures are commonly used to investigate the effects of spontaneous curvature on integral membrane proteins. Using small-angle X-ray scattering (SAXS) and (31)P NMR, we observed lamellar and vesicle phases, with the buffer causing an increase in the layer spacing. Increasing amounts of DOPE in a DOPC bilayer decreased the layer spacing of the mesophase, while the opposite trend was observed for increasing amounts of LysoPC. (31)P static NMR was used to analyze the DOPC:LysoPC samples to investigate the vesicle sizes present, with evidence of vesicle budding observed at LysoPC concentrations above 30 mol %. NMR line shapes were fitted using an adapted program accounting for the distortion of the lipids within the magnetic field. The distortion of the vesicle, because of magnetic susceptibility, varied with LysoPC content, and a discontinuity was found in both the water and buffer samples. Generally, the distortion increased with LysoPC content; however, at a ratio of DOPC:LysoPC 60:40, the sample showed a level of distortion of the vesicle similar to that of pure DOPC. This implies an increased flexibility in the membrane at this point. Commonly, the assumption is that for increasing LysoPC concentration there is a reduction in membrane tension, implying that estimations of membrane tension based on spontaneous curvature assumptions may not be accurate.

Anti-tumor and Anti-angiogenic Effects of Aspirin-PC in Ovarian Cancer

PubMed Central

Huang, Yan; Lichtenberger, Lenard M.; Taylor, Morgan; Bottsford-Miller, Justin N.; Haemmerle, Monika; Wagner, Michael J.; Lyons, Yasmin; Pradeep, Sunila; Hu, Wei; Previs, Rebecca A.; Hansen, Jean M.; Fang, Dexing; Dorniak, Piotr L.; Filant, Justyna; Dial, Elizabeth J.; Shen, Fangrong; Hatakeyama, Hiroto; Sood, Anil K.

2016-01-01

To determine the efficacy of a novel and safer (for gastrointestinal tract) aspirin (aspirin-PC) in preclinical models of ovarian cancer, in vitro dose-response studies were performed to compare the growth-inhibitory effect of aspirin-PC vs. aspirin on 3 human (A2780, SKOV3ip1, HeyA8), and a mouse (ID8) ovarian cancer cell line over an 8-day culture period. In the in vivo studies, the aspirin test drugs were studied alone and in the presence of a VEGF-A inhibitor (bevacizumab or B20), due to an emerging role for platelets in tumor growth following anti-angiogenic therapy, and we examined their underlying mechanisms. Aspirin-PC was more potent (vs. aspirin) in blocking the growth of both human and mouse ovarian cancer cells in monolayer culture. Using in vivo model systems of ovarian cancer, we found that aspirin-PC significantly reduced ovarian cancer growth by 50–90% (depending on the ovarian cell line/density). The efficacy was further enhanced in combination with Bevacizumab or B20. The growth-inhibitory effect on ovarian tumor mass and number of tumor nodules was evident, but less pronounced for aspirin and the VEGF inhibitors alone. There was no detectable gastrointestinal toxicity. Both aspirin and aspirin-PC also inhibited cell proliferation, angiogenesis and increased apoptosis of ovarian cancer cells. In conclusion, PC-associated aspirin markedly inhibits the growth of ovarian cancer cells, which exceeds that of the parent drug, in both cell culture and in mouse model systems. We also found that both aspirin-PC and aspirin have robust anti-neoplastic action in the presence of VEGF blocking drugs. PMID:27638860

Operation and Structure of an Artificial Intelligence Expert Consultative System for Reading and Learning.

ERIC Educational Resources Information Center

Balajthy, Ernest

1989-01-01

The article examines decision-making expert systems and discusses their implications for diagnosis and prescription of reading difficulties. A detailed description of how a reading diagnostic expert system might operate to aid classroom teachers is followed by a discussion of advantages and limitations of expert systems for educational use.…

EXSPRT: An Expert Systems Approach to Computer-Based Adaptive Testing.

ERIC Educational Resources Information Center

Frick, Theodore W.; And Others

Expert systems can be used to aid decision making. A computerized adaptive test (CAT) is one kind of expert system, although it is not commonly recognized as such. A new approach, termed EXSPRT, was devised that combines expert systems reasoning and sequential probability ratio test stopping rules. EXSPRT-R uses random selection of test items,…

Expert database system for quality control

NASA Astrophysics Data System (ADS)

Wang, Anne J.; Li, Zhi-Cheng

1993-09-01

There are more competitors today. Markets are not homogeneous they are fragmented into increasingly focused niches requiring greater flexibility in the product mix shorter manufacturing production runs and above allhigher quality. In this paper the author identified a real-time expert system as a way to improve plantwide quality management. The quality control expert database system (QCEDS) by integrating knowledge of experts in operations quality management and computer systems use all information relevant to quality managementfacts as well as rulesto determine if a product meets quality standards. Keywords: expert system quality control data base

Parallel processing and expert systems

NASA Technical Reports Server (NTRS)

Yan, Jerry C.; Lau, Sonie

1991-01-01

Whether it be monitoring the thermal subsystem of Space Station Freedom, or controlling the navigation of the autonomous rover on Mars, NASA missions in the 90's cannot enjoy an increased level of autonomy without the efficient use of expert systems. Merely increasing the computational speed of uniprocessors may not be able to guarantee that real time demands are met for large expert systems. Speed-up via parallel processing must be pursued alongside the optimization of sequential implementations. Prototypes of parallel expert systems have been built at universities and industrial labs in the U.S. and Japan. The state-of-the-art research in progress related to parallel execution of expert systems was surveyed. The survey is divided into three major sections: (1) multiprocessors for parallel expert systems; (2) parallel languages for symbolic computations; and (3) measurements of parallelism of expert system. Results to date indicate that the parallelism achieved for these systems is small. In order to obtain greater speed-ups, data parallelism and application parallelism must be exploited.

Fault isolation detection expert (FIDEX). Part 1: Expert system diagnostics for a 30/20 Gigahertz satellite transponder

NASA Technical Reports Server (NTRS)

Durkin, John; Schlegelmilch, Richard; Tallo, Donald

1992-01-01

LeRC has recently completed the design of a Ka-band satellite transponder system, as part of the Advanced Communication Technology Satellite (ACTS) System. To enhance the reliability of this satellite, NASA funded the University of Akron to explore the application of an expert system to provide the transponder with an autonomous diagnosis capability. The results of this research was the development of a prototype diagnosis expert system called FIDEX (fault-isolation and diagnosis expert). FIDEX is a frame-based expert system that was developed in the NEXPERT Object development environment by Neuron Data, Inc. It is a MicroSoft Windows version 3.0 application, and was designed to operate on an Intel i80386 based personal computer system.

Ethical Expert Systems

PubMed Central

Victoroff, Michael S.

1985-01-01

The title is a double entendre. The discussion approaches expert systems from two directions: “What ethical hazards are created by expert systems in medicine?” and “Would it be ethical to design an expert system for solving problems in bioethics?” Computers present new ethical problems to society, some of which are unprecedented. These can be categorized under several rubrics. The paper describes a rudimentary scheme for understanding ethical issues raised by computers, in general, and medical expert systems, in particular. It focuses on bioethical implications of AI in medicine; explores norms, assumptions and taboos; and highlights certain ethical pitfalls. Principles are elucidated, for building ethically sound systems. Finally, a proposal is discussed, for the design of an expert system for moral problem solving, and the ethical implications of this notion are analyzed.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miller, M.; Kempner, L. Jr.; Mueller, W. III

The concept of an Expert System is not new. It has been around since the days of the early computers when scientists had dreams of robot automation to do everything from washing windows to automobile design. This paper discusses an application of an expert system and addresses software development issues and various levels of expert system development form a structural engineering viewpoint. An expert system designed to aid the structural engineer in first order inelastic analysis of latticed steel transmission powers is presented. The utilization of expert systems with large numerical analysis programs is discussed along with the software developmentmore » of such a system.« less

CLEAR: Communications Link Expert Assistance Resource

NASA Technical Reports Server (NTRS)

Hull, Larry G.; Hughes, Peter M.

1987-01-01

Communications Link Expert Assistance Resource (CLEAR) is a real time, fault diagnosis expert system for the Cosmic Background Explorer (COBE) Mission Operations Room (MOR). The CLEAR expert system is an operational prototype which assists the MOR operator/analyst by isolating and diagnosing faults in the spacecraft communication link with the Tracking and Data Relay Satellite (TDRS) during periods of realtime data acquisition. The mission domain, user requirements, hardware configuration, expert system concept, tool selection, development approach, and system design were discussed. Development approach and system implementation are emphasized. Also discussed are system architecture, tool selection, operation, and future plans.

Design and implementation of a status at a glance user interface for a power distribution expert system

NASA Technical Reports Server (NTRS)

Liberman, Eugene M.; Manner, David B.; Dolce, James L.; Mellor, Pamela A.

1993-01-01

Expert systems are widely used in health monitoring and fault detection applications. One of the key features of an expert system is that it possesses a large body of knowledge about the application for which it was designed. When the user consults this knowledge base, it is essential that the expert system's reasoning process and its conclusions be as concise as possible. If, in addition, an expert system is part of a process monitoring system, the expert system's conclusions must be combined with current events of the process. Under these circumstances, it is difficult for a user to absorb and respond to all the available information. For example, a user can become distracted and confused if two or more unrelated devices in different parts of the system require attention. A human interface designed to integrate expert system diagnoses with process data and to focus the user's attention to the important matters provides a solution to the 'information overload' problem. This paper will discuss a user interface to the power distribution expert system for Space Station Freedom. The importance of features which simplify assessing system status and which minimize navigating through layers of information will be discussed. Design rationale and implementation choices will also be presented.

Developing a Web-Based Advisory Expert System for Implementing Traffic Calming Strategies

PubMed Central

Falamarzi, Amir; Borhan, Muhamad Nazri; Rahmat, Riza Atiq O. K.

2014-01-01

Lack of traffic safety has become a serious issue in residential areas. In this paper, a web-based advisory expert system for the purpose of applying traffic calming strategies on residential streets is described because there currently lacks a structured framework for the implementation of such strategies. Developing an expert system can assist and advise engineers for dealing with traffic safety problems. This expert system is developed to fill the gap between the traffic safety experts and people who seek to employ traffic calming strategies including decision makers, engineers, and students. In order to build the expert system, examining sources related to traffic calming studies as well as interviewing with domain experts have been carried out. The system includes above 150 rules and 200 images for different types of measures. The system has three main functions including classifying traffic calming measures, prioritizing traffic calming strategies, and presenting solutions for different traffic safety problems. Verifying, validating processes, and comparing the system with similar works have shown that the system is consistent and acceptable for practical uses. Finally, some recommendations for improving the system are presented. PMID:25276861

Developing a web-based advisory expert system for implementing traffic calming strategies.

PubMed

Falamarzi, Amir; Borhan, Muhamad Nazri; Rahmat, Riza Atiq O K

2014-01-01

Lack of traffic safety has become a serious issue in residential areas. In this paper, a web-based advisory expert system for the purpose of applying traffic calming strategies on residential streets is described because there currently lacks a structured framework for the implementation of such strategies. Developing an expert system can assist and advise engineers for dealing with traffic safety problems. This expert system is developed to fill the gap between the traffic safety experts and people who seek to employ traffic calming strategies including decision makers, engineers, and students. In order to build the expert system, examining sources related to traffic calming studies as well as interviewing with domain experts have been carried out. The system includes above 150 rules and 200 images for different types of measures. The system has three main functions including classifying traffic calming measures, prioritizing traffic calming strategies, and presenting solutions for different traffic safety problems. Verifying, validating processes, and comparing the system with similar works have shown that the system is consistent and acceptable for practical uses. Finally, some recommendations for improving the system are presented.

Executive system software design and expert system implementation

NASA Technical Reports Server (NTRS)

Allen, Cheryl L.

1992-01-01

The topics are presented in viewgraph form and include: software requirements; design layout of the automated assembly system; menu display for automated composite command; expert system features; complete robot arm state diagram and logic; and expert system benefits.

Expert Systems in Reference Services.

ERIC Educational Resources Information Center

Roysdon, Christine, Ed.; White, Howard D., Ed.

1989-01-01

Eleven articles introduce expert systems applications in library and information science, and present design and implementation issues of system development for reference services. Topics covered include knowledge based systems, prototype development, the use of artificial intelligence to remedy current system inadequacies, and an expert system to…

General specifications for the development of a PC-based simulator of the NASA RECON system

NASA Technical Reports Server (NTRS)

Dominick, Wayne D. (Editor); Triantafyllopoulos, Spiros

1984-01-01

The general specifications for the design and implementation of an IBM PC/XT-based simulator of the NASA RECON system, including record designs, file structure designs, command language analysis, program design issues, error recovery considerations, and usage monitoring facilities are discussed. Once implemented, such a simulator will be utilized to evaluate the effectiveness of simulated information system access in addition to actual system usage as part of the total educational programs being developed within the NASA contract.

Research on parallel combinatory spread spectrum communication system with double information matching

NASA Astrophysics Data System (ADS)

Xue, Wei; Wang, Qi; Wang, Tianyu

2018-04-01

This paper presents an improved parallel combinatory spread spectrum (PC/SS) communication system with the method of double information matching (DIM). Compared with conventional PC/SS system, the new model inherits the advantage of high transmission speed, large information capacity and high security. Besides, the problem traditional system will face is the high bit error rate (BER) and since its data-sequence mapping algorithm. Hence the new model presented shows lower BER and higher efficiency by its optimization of mapping algorithm.

A demonstration of expert systems applications in transportation engineering : volume III, evaluation of the prototype expert system TRANZ.

DOT National Transportation Integrated Search

1990-01-01

The validation and evaluation of an expert system for traffic control in highway work zones (TRANZ) is described. The stages in the evaluation process consisted of the following: revisit the experts, selectively distribute copies of TRANZ with docume...

Insulin stimulates phospholipase D-dependent phosphatidylcholine hydrolysis, Rho translocation, de novo phospholipid synthesis, and diacylglycerol/protein kinase C signaling in L6 myotubes.

PubMed

Standaert, M L; Bandyopadhyay, G; Zhou, X; Galloway, L; Farese, R V

1996-07-01

Previous studies have provided conflicting findings on whether insulin activates certain, potentially important, phospholipid signaling systems in skeletal muscle preparations. In particular, insulin effects on the hydrolysis of phosphatidylcholine (PC) and subsequent activation of protein kinase C (PKC) have not been apparent in some studies. Presently, we examined insulin effects on phospholipid signaling systems, diacylglycerol (DAG) production, and PKC translocation/activation in L6 myotubes. We found that insulin provoked rapid increases in phospholipase D (PLD)-dependent hydrolysis of PC, as evidenced by increases in choline release and phosphatidylethanol production in cells incubated in the presence of ethanol. In association with PC-PLD activation, Rho, a small G protein that is known to activate PC-PLD activation, translocated from the cytosol to the membrane fraction in response to insulin treatment. PC-PLD activation was also accompanied by increases in total DAG production and increases in the translocation of both PKC enzyme activity and DAG-sensitive PKC-alpha, -beta, -delta, and -epsilon from the cytosol to the membrane fraction. A potential role for PKC or a related protein kinase in insulin action was suggested by the finding that RO 31-8220 inhibited both PKC enzyme activity and insulin-stimulated [3H]2-deoxyglucose uptake. Our findings provide the first evidence that insulin stimulates Rho translocation and activates PC-PLD in L6 skeletal muscle cells. Moreover, this signaling system appears to lead to increases in DAG/PKC signaling, which, along with other related signaling factors, may regulate certain metabolic processes, such as glucose transport, in these cells.

Understanding performance and behavior of tightly coupled outpatient systems using RFID: initial experience.

PubMed

Stahl, James E; Holt, Julie K; Gagliano, Nancy J

2011-06-01

Understanding how clinical systems actually behave in an era of limited medical resources is critical. The purpose of this study was to determine if a radiofrequency-identification-based indoor positioning system (IPS) could objectively and unobtrusively capture outpatient clinic behavior. Primary outcomes were flowtime, wait time and patient/clinician face time. Two contrasting clinics were evaluated: a primary care clinic (PC) with templated scheduling and an urgent care clinic (UC) with unconstrained visit time and first-in, first-out scheduling. All staff wore transponders throughout the study period. Patients carried transponders from check in to check out. All patients and staff were allowed to opt out. The study was approved by hospital IRB. Standard descriptive and analytic statistical methods were used. Five hundred twenty-six patients (309 patients (PC), 217 patients (UC)) and 38 clinicians (eight (PC) and 30 (UC)) volunteered between April 30 and July 1, 2008. Total FT was not significantly different across clinics. PC wait time was significantly shorter (7.6 min [SD 15.8]) vs. UC (19.7 min [SD 25.3], p < 0.0001), and PC Face time was significantly longer (29.9 min, [SD 19.1] vs. UC (9.8 min [SD 8.5], p < 0.0001). PC Face time distributions reflected template scheduling structure. In contrast, face time distributions in UC had a smooth log normal distribution with a lower mean value. Our study seems to indicate that an IPS can successfully measure important clinic process measures in live clinical outpatient settings and capture behavioral differences across different outpatient organizational structures.

Initial assessments of life support technology evolution and advanced sensor requirements, volume 2, appendix A

NASA Technical Reports Server (NTRS)

Montgomery, Edward E.

1991-01-01

The primary issues studied were how the transition from a physical/chemical (P/C) to hybrid to a Closed Ecological Life Support System (CELSS) could be achieved, what sensors and monitors are needed for a P/C -CELSS hybrid system, and how a CELSS could be automated and what controls would be needed to do so.

Separation of Native Allophycocyanin and R-Phycocyanin from Marine Red Macroalga Polysiphonia urceolata by the Polyacrylamide Gel Electrophoresis Performed in Novel Buffer Systems

PubMed Central

Wang, Yu; Gong, Xueqin; Wang, Shumei; Chen, Lixue; Sun, Li

2014-01-01

Three buffer systems of Imidazole−Acetic acid, HEPES−Imidazole/Bis-tris and Bis-tris−HEPES−MES were designed based on the principle of discontinuous polyacrylamide gel electrophoresis (PAGE) for the native PAGE which could be performed in pH 7.0 and 6.5 in order to analyze and prepare the minor components of allophycocyanin (AP) and R-phycocyanin (R-PC) from marine red macroalga Polysiphonia urceolata. These AP and R-PC phycobiliproteins are easily denatured in alkaline environments. The obtained results demonstrated that the PAGE modes performed in the buffer systems of HEPES−Imidazole/Bis-tris and Bis-tris−HEPES−MES gave the satisfactory resolution and separation of AP and R-PC proteins. The absorption and fluorescence spectra of the AP and R-PC proteins which were prepared by the established PAGE modes proved that they maintained natural spectroscopic characteristics. The established PAGE modes may also provide useful references and selections for some other proteins that are sensitive to alkaline environments or are not effectively separated by the classical PAGE modes performed normally in alkaline buffer systems. PMID:25166028

Implementation of palliative care in Lebanon: past, present, and future.

PubMed

Daher, Michel; Estephan, Elie; Abu-Saad Huijer, Huda; Naja, Zoher

2008-01-01

The goal of palliative care (PC) is to relieve suffering. PC is an urgent humanitarian need worldwide for people with cancer and other chronic fatal diseases. PC in Lebanon has made some important strides in the last decade but it is still in its infancy. More attention needs to be given in the near future to the implementation of the recommendations already listed by previous meetings and workshops. In order to do so, it is necessary to change the legislative system in Lebanon in order to recognize and to integrate this new discipline. Education and training of health professionals in PC should be provided by medical and nursing schools throughout the country. Postgraduate education in medicine and nursing and ensuing certification should be made available. Ideally, PC services should be provided from the time of diagnosis of life-threatening illness, adapting to the increasing needs of cancer patients and their families as the disease progresses into the terminal phase. They should also provide support to families in their bereavement. It is as important and essential to involve policy makers in the development of pain relief and PC services and clinics which meet the needs of the population in Lebanon. Effective PC services should be integrated into the existing health system at all levels of care, especially community and home-based care. They involve the public and the private sector and are adapted to the specific cultural, social and economic setting. In order to respond to the cancer priority needs in a community and make the best use of scarce resources, PC services should be strategically linked to cancer prevention, early detection and treatment services. The time will come for Lebanon to form the National Council for Pain Relief and Palliative Care as an advocacy and coordination body for pain relief and PC in the near future. To that effect, we believe the future is near.

Fabrication and Electromagnetic Properties of Conjugated NH2-CuPc@Fe3O4

NASA Astrophysics Data System (ADS)

Yan, Liang; Pu, Zejun; Xu, Mingzhen; Wei, Renbo; Liu, Xiaobo

2017-10-01

Conjugated amino-phthalocyanine copper containing carboxyl groups/magnetite (NH2-CuPc@Fe3O4) has been fabricated from FeCl3·6H2O and NH2-CuPc via a simple solvothermal method and its electromagnetic properties investigated. Scanning electron microscopy and transmission electron microscopy revealed that the NH2-CuPc@Fe3O4 was a waxberry-like nanomaterial with NH2-CuPc molecules effectively embedded in the interior of Fe3O4 particles in the form of beads. Introduction of NH2-CuPc effectively improved the complementarity between the dielectric and magnetic losses of the system, resulting in excellent electromagnetic performance. The minimum reflection loss of the as-prepared composite reached -33.4 dB at 7.0 GHz for coating layer thickness of 4.0 mm and bandwidth below -10.0 dB (90% absorption) of up to 3.8 GHz. These results indicate that introduction of NH2-CuPc results in a composite with potential for use as an electromagnetic microwave absorption material.

Distinguishing polymorphs of the semiconducting pigment copper phthalocyanine by solid-state NMR and Raman spectroscopy.

PubMed

Shaibat, Medhat A; Casabianca, Leah B; Siberio-Pérez, Diana Y; Matzger, Adam J; Ishii, Yoshitaka

2010-04-08

Cu(II)(phthalocyanine) (CuPc) is broadly utilized as an archetypal molecular semiconductor and is the most widely used blue printing pigment. CuPc crystallizes in six different forms; the chemical and physical properties are substantially modulated by its molecular packing among these polymorphs. Despite the growing importance of this system, spectroscopic identification of different polymorphs for CuPc has posed difficulties. This study presents the first example of spectroscopic distinction of alpha- and beta-forms of CuPc, the most widely used polymorphs, by solid-state NMR (SSNMR) and Raman spectroscopy. (13)C high-resolution SSNMR spectra of alpha- and beta-CuPc using very-fast magic angle spinning (VFMAS) at 20 kHz show that hyperfine shifts sensitively reflect polymorphs of CuPc. The experimental results were confirmed by ab initio chemical shift calculations. (13)C and (1)H SSNMR relaxation times of alpha- and beta-CuPc under VFMAS also showed marked differences, presumably because of the difference in electronic spin correlation times in the two forms. Raman spectroscopy also provided another reliable method of differentiation between the two polymorphs.

Development and practice of a Telehealthcare Expert System (TES).

PubMed

Lin, Hanjun; Hsu, Yeh-Liang; Hsu, Ming-Shinn; Cheng, Chih-Ming

2013-07-01

Expert systems have been widely used in medical and healthcare practice for various purposes. In addition to vital sign data, important concerns in telehealthcare include the compliance with the measurement prescription, the accuracy of vital sign measurements, and the functioning of vital sign meters and home gateways. However, few expert system applications are found in the telehealthcare domain to address these issues. This article presents an expert system application for one of the largest commercialized telehealthcare practices in Taiwan by Min-Sheng General Hospital. The main function of the Telehealthcare Expert System (TES) developed in this research is to detect and classify events based on the measurement data transmitted to the database at the call center, including abnormality of vital signs, violation of vital sign measurement prescriptions, and malfunction of hardware devices (home gateway and vital sign meter). When the expert system detects an abnormal event, it assigns an "urgent degree" and alerts the nursing team in the call center to take action, such as phoning the patient for counseling or to urge the patient to return to the hospital for further tests. During 2 years of clinical practice, from 2009 to 2011, 19,182 patients were served by the expert system. The expert system detected 41,755 events, of which 22.9% indicated abnormality of vital signs, 75.2% indicated violation of measurement prescription, and 1.9% indicated malfunction of devices. On average, the expert system reduced by 76.5% the time that the nursing team in the call center spent in handling the events. The expert system helped to reduce cost and improve quality of the telehealthcare service.

An SQL query generator for CLIPS

NASA Technical Reports Server (NTRS)

Snyder, James; Chirica, Laurian

1990-01-01

As expert systems become more widely used, their access to large amounts of external information becomes increasingly important. This information exists in several forms such as statistical, tabular data, knowledge gained by experts and large databases of information maintained by companies. Because many expert systems, including CLIPS, do not provide access to this external information, much of the usefulness of expert systems is left untapped. The scope of this paper is to describe a database extension for the CLIPS expert system shell. The current industry standard database language is SQL. Due to SQL standardization, large amounts of information stored on various computers, potentially at different locations, will be more easily accessible. Expert systems should be able to directly access these existing databases rather than requiring information to be re-entered into the expert system environment. The ORACLE relational database management system (RDBMS) was used to provide a database connection within the CLIPS environment. To facilitate relational database access a query generation system was developed as a CLIPS user function. The queries are entered in a CLlPS-like syntax and are passed to the query generator, which constructs and submits for execution, an SQL query to the ORACLE RDBMS. The query results are asserted as CLIPS facts. The query generator was developed primarily for use within the ICADS project (Intelligent Computer Aided Design System) currently being developed by the CAD Research Unit in the California Polytechnic State University (Cal Poly). In ICADS, there are several parallel or distributed expert systems accessing a common knowledge base of facts. Expert system has a narrow domain of interest and therefore needs only certain portions of the information. The query generator provides a common method of accessing this information and allows the expert system to specify what data is needed without specifying how to retrieve it.

Cataloging Expert Systems: Optimism and Frustrated Reality.

ERIC Educational Resources Information Center

Olmstadt, William J.

2000-01-01

Discusses artificial intelligence and attempts to catalog expert systems. Topics include the nature of expertise; examples of cataloging expert systems; barriers to implementation; and problems, including total automation, cataloging expertise, priorities, and system design. (LRW)

Development of an instructional expert system for hole drilling processes

NASA Technical Reports Server (NTRS)

Al-Mutawa, Souhaila; Srinivas, Vijay; Moon, Young Bai

1990-01-01

An expert system which captures the expertise of workshop technicians in the drilling domain was developed. The expert system is aimed at novice technicians who know how to operate the machines but have not acquired the decision making skills that are gained with experience. This paper describes the domain background and the stages of development of the expert system.

Theoretical and experimental analysis of analyte transport in a fiber-optic, protein C immuno-biosensor.

PubMed

Tang, Liang; Kwon, Hyun J; Kang, Kyung A

2004-12-30

Protein C (PC) is an important anticoagulant in human blood plasma, and early diagnosis of PC deficiency is critical for preventing dangerous thromboembolic complications. A fiber-optic PC immuno-biosensor has been under development in our research group for real-time PC-deficiency diagnosis. The sensor has demonstrated a good sensitivity and specificity for quantifying PC in buffered solutions. However, for plasma samples, with a limited sample reaction time, the sensor produced only 30% of the signal intensity of PC in buffer. The high plasma viscosity (1.9 cP) was speculated as the major reason for signal intensity reduction. In this investigation, the sensing performance of the fiber-optic PC biosensor is systematically characterized in terms of physical and chemical properties of the sample media. Theoretical and experimental analyses indicate that the reduced diffusion rate of PC molecules in viscous samples caused the sensing system to be more mass-transfer-limited. Convective flow of sample/reagent solutions during immunoreactions can increase the rate of the analyte mass transport from the bulk solution to the sensor surface, with reaction kinetics changing from mass-transfer-limited to reaction-limited as flow velocity increases. It was shown that PC sensor performance was significantly improved for plasma samples with convection. The effect of the flow velocity and incubation times for samples and reagents on the sensor performance was also systematically analyzed to optimize the assay protocol for PC sensing. Currently, a 6-cm-long immuno-biosensor is capable of quantifying PC in plasma (1 mL) in the heterozygous PC deficiency range (0.5 to 2.5 microg/mL) within 5 minutes, at an average signal-to-noise ratio of 50. 2004 Wiley Periodicals, Inc.

Phosphatidylcholine embedded micellar systems: enhanced permeability through rat skin.

PubMed

Spernath, Aviram; Aserin, Abraham; Sintov, Amnon C; Garti, Nissim

2008-02-15

Micellar and microemulsion systems are excellent potential vehicles for delivery of drugs because of their high solubilization capacity and improved transmembrane bioavailability. Mixtures of propylene glycol (PG) and nonionic surfactants with sodium diclofenac (DFC) were prepared in the presence of phosphatidylcholine (PC) as transmembrane transport enhancers. Fully dilutable systems with maximum DFC solubilization capacity (SC) at pH 7 are presented. It was demonstrated that the concentrates underwent phase transitions from reverse micelles to swollen reverse micelles and, via the bicontinuous transitional mesophase, into inverted O/W microstructures. The SC decreases as a function of dilution. DFC transdermal penetration using rat skin in vitro correlated with SC, water content, effect of phospholipid content, presence of an oil phase, and ethanol. Skin penetration from the inverted bicontinuous mesophase and the skin penetration from the O/W-like microstructure were higher than that measured from the W/O-like droplets, especially when the micellar system containing the nonionic surfactant, sugar ester L-1695, and hexaglycerol laurate. PC embedded within the micelle interface significantly increased the penetration flux across the skin compared to micellar systems without the embedded PC at their interface. Moreover, the combination of PC with HECO40 improved the permeation rate (P) and shortened the lag-time (T(L)).

Defective transport of the obesity mutant PC1/3 N222D contributes to loss of function.

PubMed

Prabhu, Yogikala; Blanco, Elias H; Liu, Ming; Peinado, Juan R; Wheeler, Matthew C; Gekakis, Nicholas; Arvan, Peter; Lindberg, Iris

2014-07-01

Mutations in the PCSK1 gene encoding prohormone convertase 1/3 (PC1/3) are strongly associated with obesity in humans. The PC1/3(N222D) mutant mouse thus far represents the only mouse model that mimics the PC1/3 obesity phenotype in humans. The present investigation addresses the cell biology of the N222D mutation. Metabolic labeling experiments reveal a clear defect in the kinetics of insulin biosynthesis in islets from PC1/3(N222D) mutant mice, resulting in an increase in both proinsulin and its processing intermediates, predominantly lacking cleavage at the Arg-Arg site. Although the mutant PC1/3 zymogen is correctly processed to the 87-kDa form, pulse-chase immunoprecipitation experiments, labeling, and immunohistochemical experiments using uncleavable variants all demonstrate that the PC1/3-N222D protein is largely mislocalized compared with similar wild-type (WT) constructs, being predominantly retained in the endoplasmic reticulum. The PC1/3-N222D mutant also undergoes more efficient degradation via the ubiquitin-proteasome system than the WT enzyme. Lastly, the mutant PC1/3-N222D protein coimmunoprecipitates with WT PC1/3 and exerts a modest effect on intracellular retention of the WT enzyme. These profound alterations in the cell biology of PC1/3-N222D are likely to contribute to the defective insulin biosynthetic events observed in the mutant mice and may be relevant to the dramatic contributions of polymorphisms in this gene to human obesity.

Defective Transport of the Obesity Mutant PC1/3 N222D Contributes to Loss of Function

PubMed Central

Prabhu, Yogikala; Blanco, Elias H.; Liu, Ming; Peinado, Juan R.; Wheeler, Matthew C.; Gekakis, Nicholas; Arvan, Peter

2014-01-01

Mutations in the PCSK1 gene encoding prohormone convertase 1/3 (PC1/3) are strongly associated with obesity in humans. The PC1/3N222D mutant mouse thus far represents the only mouse model that mimics the PC1/3 obesity phenotype in humans. The present investigation addresses the cell biology of the N222D mutation. Metabolic labeling experiments reveal a clear defect in the kinetics of insulin biosynthesis in islets from PC1/3N222D mutant mice, resulting in an increase in both proinsulin and its processing intermediates, predominantly lacking cleavage at the Arg-Arg site. Although the mutant PC1/3 zymogen is correctly processed to the 87-kDa form, pulse-chase immunoprecipitation experiments, labeling, and immunohistochemical experiments using uncleavable variants all demonstrate that the PC1/3-N222D protein is largely mislocalized compared with similar wild-type (WT) constructs, being predominantly retained in the endoplasmic reticulum. The PC1/3-N222D mutant also undergoes more efficient degradation via the ubiquitin-proteasome system than the WT enzyme. Lastly, the mutant PC1/3-N222D protein coimmunoprecipitates with WT PC1/3 and exerts a modest effect on intracellular retention of the WT enzyme. These profound alterations in the cell biology of PC1/3-N222D are likely to contribute to the defective insulin biosynthetic events observed in the mutant mice and may be relevant to the dramatic contributions of polymorphisms in this gene to human obesity. PMID:24828610

Evaluation of the Missouri WIC (Special Supplemental Nutrition Program for Women, Infants, and Children) breast-feeding peer counselling programme.

PubMed

Yun, Shumei; Liu, Qian; Mertzlufft, Kathy; Kruse, Catherine; White, Maggie; Fuller, Phyllis; Zhu, Bao-Ping

2010-02-01

To evaluate the effectiveness of the peer counselling (PC) programme on breast-feeding initiation among participants in the Special Supplemental Nutrition Program for Women, Infants, and Children (WIC) in Missouri, and to identify factors that facilitate breast-feeding initiation. We used the data from the 2006 Missouri Pregnancy Nutrition Surveillance System, Missouri Live Birth Records and the Missouri WIC programme to compare breast-feeding initiation rates between PC and non-PC agencies. We used multilevel logistic regression, with individual participants being nested within agencies, to control for individual- and agency-level characteristics. The breast-feeding initiation rate in PC agencies was significantly higher than in non-PC agencies among prenatal participants, but the difference was not significant among postpartum participants. After controlling for maternal sociodemographic characteristics, compared with prenatal cases in non-PC agencies, prenatal cases in PC agencies were more likely to initiate breast-feeding (OR = 1.21; 95 % CI 1.03, 1.43), whereas postpartum cases were less likely to initiate breast-feeding. Among prenatal participants in PC agencies, longer duration of prenatal WIC enrolment was associated with a higher rate of breast-feeding initiation. After adjusting for maternal sociodemographic characteristics and other agency-level characteristics, participants of PC agencies with an international board-certified lactation consultant were more likely to initiate breast-feeding than participants of PC agencies without such a consultant (OR = 1.21; 95 % CI 1.01, 1.45). Prenatal participation in the WIC breast-feeding PC programme (especially participation early during pregnancy) was associated with an increased rate of breast-feeding initiation in Missouri.

Liposomes with polyribonucleotides as model of precellular systems

NASA Technical Reports Server (NTRS)

Baeza, Isabel; Ibanez, Miguel; Santiago, Carlos; Lazcano, Antonio; Arguello, Carlos

1987-01-01

Three types of liposomes were prepared under anoxic conditions: from dipalmitoyl phosphatidyl choline (DPPC), from egg yolk phosphatidyl choline (PC), and from PC with cholesterol (PC:Chol). These were used for encapsulation of poly(U) and poly(C). It was found that 36 to 70 percent of the available liposome lipids and 2 to 5 percent of the polyribonucleotides could be entrapped. An enhanced encapsulation of poly(U) and poly(C) by all three types of liposomes was observed in the presence of 0.001 to 0.01 M Zn(2+), with the effect being greatest with DPPC. The presence of 1.0 M urea inhibited the formation of PC liposomes.

a Linux PC Cluster for Lattice QCD with Exact Chiral Symmetry

NASA Astrophysics Data System (ADS)

Chiu, Ting-Wai; Hsieh, Tung-Han; Huang, Chao-Hsi; Huang, Tsung-Ren

A computational system for lattice QCD with overlap Dirac quarks is described. The platform is a home-made Linux PC cluster, built with off-the-shelf components. At present the system constitutes of 64 nodes, with each node consisting of one Pentium 4 processor (1.6/2.0/2.5 GHz), one Gbyte of PC800/1066 RDRAM, one 40/80/120 Gbyte hard disk, and a network card. The computationally intensive parts of our program are written in SSE2 codes. The speed of our system is estimated to be 70 Gflops, and its price/performance ratio is better than $1.0/Mflops for 64-bit (double precision) computations in quenched QCD. We discuss how to optimize its hardware and software for computing propagators of overlap Dirac quarks.

The vitamin C:vitamin K3 system - enhancers and inhibitors of the anticancer effect.

PubMed

Lamson, Davis W; Gu, Yu-Huan; Plaza, Steven M; Brignall, Matthew S; Brinton, Cathy A; Sadlon, Angela E

2010-12-01

The oxidizing anticancer system of vitamin C and vitamin K₃ (VC:VK₃, producing hydrogen peroxide via superoxide) was combined individually with melatonin, curcumin, quercetin, or cholecalciferol (VD₃) to determine interactions. Substrates were LNCaP and PC-3 prostate cancer cell lines. Three of the tested antioxidants displayed differences in cell line cytotoxicity. Melatonin combined with VC:VK₃ quenched the oxidizing effect, while VC:VK₃ applied 24 hours after melatonin showed no quenching. With increasing curcumin concentrations, an apparent combined effect of VC:VK₃ and curcumin occurred in LNCaP cells, but not PC-3 cells. Quercetin alone was cytotoxic on both cell lines, but demonstrated an additional 50-percent cytotoxicity on PC-3 cells when combined with VC:VK₃. VD₃ was effective against both cell lines, with more effect on PC-3. This effect was negated on LNCaP cells with the addition of VC:VK₃. In conclusion, a natural antioxidant can enhance or decrease the cytotoxicity of an oxidizing anticancer system in vitro, but generalizations about antioxidants cannot be made.

Characterization of un-plasticized and propylene carbonate plasticized carboxymethyl cellulose doped ammonium chloride solid biopolymer electrolytes.

PubMed

Ahmad, N H; Isa, M I N

2016-02-10

Two solid biopolymer electrolytes (SBEs) systems of carboxymethyl cellulose doped ammonium chloride (CMC-AC) and propylene carbonate plasticized (CMC-AC-PC) were prepared via solution casting technique. The ionic conductivity of SBEs were analyzed using electrical impedance spectroscopy (EIS) in the frequency range of 50 Hz-1 MHz at ambient temperature (303K). The highest ionic conductivity of CMC-AC SBE is 1.43 × 10(-3)S/cm for 16 wt.% of AC while the highest conductivity of plasticized SBE system is 1.01 × 10(-2)S/cm when added with 8 wt.% of PC. TGA/DSC showed that the addition of PC had increased the decomposition temperature compared of CMC-AC SBE. Fourier transform infrared (FTIR) spectra showed the occurrence of complexation between the SBE components and it is proved successfully executed by Gaussian software. X-ray diffraction (XRD) indicated that amorphous nature of SBEs. It is believed that the PC is one of the most promising plasticizer to enhance the ionic conductivity and performance for SBE system. Copyright © 2015 Elsevier Ltd. All rights reserved.

On-patient see-through augmented reality based on visual SLAM.

PubMed

Mahmoud, Nader; Grasa, Óscar G; Nicolau, Stéphane A; Doignon, Christophe; Soler, Luc; Marescaux, Jacques; Montiel, J M M

2017-01-01

An augmented reality system to visualize a 3D preoperative anatomical model on intra-operative patient is proposed. The hardware requirement is commercial tablet-PC equipped with a camera. Thus, no external tracking device nor artificial landmarks on the patient are required. We resort to visual SLAM to provide markerless real-time tablet-PC camera location with respect to the patient. The preoperative model is registered with respect to the patient through 4-6 anchor points. The anchors correspond to anatomical references selected on the tablet-PC screen at the beginning of the procedure. Accurate and real-time preoperative model alignment (approximately 5-mm mean FRE and TRE) was achieved, even when anchors were not visible in the current field of view. The system has been experimentally validated on human volunteers, in vivo pigs and a phantom. The proposed system can be smoothly integrated into the surgical workflow because it: (1) operates in real time, (2) requires minimal additional hardware only a tablet-PC with camera, (3) is robust to occlusion, (4) requires minimal interaction from the medical staff.

A parallel expert system for the control of a robotic air vehicle

NASA Technical Reports Server (NTRS)

Shakley, Donald; Lamont, Gary B.

1988-01-01

Expert systems can be used to govern the intelligent control of vehicles, for example the Robotic Air Vehicle (RAV). Due to the nature of the RAV system the associated expert system needs to perform in a demanding real-time environment. The use of a parallel processing capability to support the associated expert system's computational requirement is critical in this application. Thus, algorithms for parallel real-time expert systems must be designed, analyzed, and synthesized. The design process incorporates a consideration of the rule-set/face-set size along with representation issues. These issues are looked at in reference to information movement and various inference mechanisms. Also examined is the process involved with transporting the RAV expert system functions from the TI Explorer, where they are implemented in the Automated Reasoning Tool (ART), to the iPSC Hypercube, where the system is synthesized using Concurrent Common LISP (CCLISP). The transformation process for the ART to CCLISP conversion is described. The performance characteristics of the parallel implementation of these expert systems on the iPSC Hypercube are compared to the TI Explorer implementation.

Innovation on Energy Power Technology (22)Challenge to Development of Expert System stored Knowledge of Expert Power Network Operators

NASA Astrophysics Data System (ADS)

Sakaguchi, Hideharu

Do you remember an expert system? I think there are various impressions about the system. For example, some might say “It reminds me of old days”. On the other hand, some might say “It was really troublesome”. About 25 years ago, from late 1980s to the middle of 1990s, when the Showa era was about to change into the Heisei Era, artificial intelligence boomed. Research and development for an expert system which was equipped with expertise and worked as smart as expert, was advanced in various fields. Our company also picked up the system as the new system which covered weak point of conventional computer technology. We started research and development in 1984, and installed an expert system in a SCADA system, which started operating in March 1990 in the Fukuoka Integrated Control Center. In this essay, as an electric power engineer who involved in development at that time, I introduce the situation and travail story about developing an expert system which support restorative actions from the outage and overload condition of power networks.

Cooperating Expert Systems For Space Station Power Distribution Management

NASA Astrophysics Data System (ADS)

Nguyen, T. A.; Chiou, W. C.

1987-02-01

In a complex system such as the manned Space Station, it is deem necessary that many expert systems must perform tasks in a concurrent and cooperative manner. An important question arise is: what cooperative-task-performing models are appropriate for multiple expert systems to jointly perform tasks. The solution to this question will provide a crucial automation design criteria for the Space Station complex systems architecture. Based on a client/server model for performing tasks, we have developed a system that acts as a front-end to support loosely-coupled communications between expert systems running on multiple Symbolics machines. As an example, we use two ART*-based expert systems to demonstrate the concept of parallel symbolic manipulation for power distribution management and dynamic load planner/scheduler in the simulated Space Station environment. This on-going work will also explore other cooperative-task-performing models as alternatives which can evaluate inter and intra expert system communication mechanisms. It will be served as a testbed and a bench-marking tool for other Space Station expert subsystem communication and information exchange.

A software engineering approach to expert system design and verification

NASA Technical Reports Server (NTRS)

Bochsler, Daniel C.; Goodwin, Mary Ann

1988-01-01

Software engineering design and verification methods for developing expert systems are not yet well defined. Integration of expert system technology into software production environments will require effective software engineering methodologies to support the entire life cycle of expert systems. The software engineering methods used to design and verify an expert system, RENEX, is discussed. RENEX demonstrates autonomous rendezvous and proximity operations, including replanning trajectory events and subsystem fault detection, onboard a space vehicle during flight. The RENEX designers utilized a number of software engineering methodologies to deal with the complex problems inherent in this system. An overview is presented of the methods utilized. Details of the verification process receive special emphasis. The benefits and weaknesses of the methods for supporting the development life cycle of expert systems are evaluated, and recommendations are made based on the overall experiences with the methods.

Development of an expert system prototype for determining software functional requirements for command management activities at NASA Goddard

NASA Technical Reports Server (NTRS)

Liebowitz, J.

1986-01-01

The development of an expert system prototype for software functional requirement determination for NASA Goddard's Command Management System, as part of its process of transforming general requests into specific near-earth satellite commands, is described. The present knowledge base was formulated through interactions with domain experts, and was then linked to the existing Knowledge Engineering Systems (KES) expert system application generator. Steps in the knowledge-base development include problem-oriented attribute hierarchy development, knowledge management approach determination, and knowledge base encoding. The KES Parser and Inspector, in addition to backcasting and analogical mapping, were used to validate the expert system-derived requirements for one of the major functions of a spacecraft, the solar Maximum Mission. Knowledge refinement, evaluation, and implementation procedures of the expert system were then accomplished.

Third CLIPS Conference Proceedings, volume 1

NASA Technical Reports Server (NTRS)

Riley, Gary (Editor)

1994-01-01

Expert systems are computed programs which emulate human expertise in well defined problem domains. The potential payoff from expert systems is high: valuable expertise can be captured and preserved, repetitive and/or mundane tasks requiring human expertise can be automated, and uniformity can be applied in decision making processes. The C Language Integrated Production Systems (CLIPS) is an expert system building tool, developed at the Johnson Space Center, which provides a complete environment for the development and delivery of rule and/or object based expert systems. CLIPS was specifically designed to provide a low cost option for developing and deploying expert system applications across a wide range of hardware platforms. The development of CLIPS has helped to improve the ability to deliver expert systems technology throughout the public and private sectors for a wide range of applications and diverse computing environments.

CLIPS: An expert system building tool

NASA Technical Reports Server (NTRS)

Riley, Gary

1991-01-01

The C Language Integrated Production System (CLIPS) is an expert system building tool, which provides a complete environment for the development and delivery of rule and/or object based expert systems. CLIPS was specifically designed to provide a low cost option for developing and deploying expert system applications across a wide range of hardware platforms. The commercial potential of CLIPS is vast. Currently, CLIPS is being used by over 3,300 individuals throughout the public and private sector. Because the CLIPS source code is readily available, numerous groups have used CLIPS as a basis for their own expert system tools. To date, three commercially available tools have been derived from CLIPS. In general, the development of CLIPS has helped to improve the ability to deliver expert system technology throughout the public and private sectors for a wide range of applications and diverse computing environments.

Antibacterial activity of hemocyanin from red swamp crayfish (Procambarus clarkii).

PubMed

Qin, Zhendong; Babu, V Sarath; Wan, Quanyuan; Muhammad, Asim; Li, Jun; Lan, Jiangfeng; Lin, Li

2018-04-01

Hemocyanins (HMC): the copper-containing respiratory proteins present in invertebrate hemolymph, which plays many essential roles in the immune system. Currently, little is known about the HMC domains of Procambarus clarkii (P. clarkii) and their function in antimicrobial immune response. In this present study, we comparatively studied the expression pattern of native PcHMC with the three recombinant proteins of variable domains of crayfish hemocyanin (PcHMC-N, N-terminal domain of hemocyanin; PcHMC-T, tyrosinase domain of hemocyanin; PcHMC-C, C-terminal domain of hemocyanin). The results showed that three purified recombinant proteins had a strong binding to various bacteria and lipopolysaccharides that further highly agglutinated. The HMCs recombinant proteins showed strong antibacterial activity against V. parahaemolyticus and S. aureus by bacterial growth inhibition, phenoloxidase (PO) and phagocytosis assays. Specifically, rPcHMC1-T and rPcHMC1-C inhibited both the bacteria efficiently, rPcHMC1-T was highly upregulated the PO activity than the other recombinant proteins. Whereas, recombinant proteins pretreated crayfish hemocytes participated in phagocytosis activity, rPcHMC1-N and rPcHMC1-C proteins had a profound effect than the rPcHMC1-T on S. aureus and V. parahaemolyticus phagocytosis. The crayfish hemocyanin domains clearly exhibited antibacterial and phagocytic activities against both the bacteria, suggesting that its variable domains of hemocyanin have the different function on specific pathogen during the assault of pathogens. Copyright © 2018 Elsevier Ltd. All rights reserved.

Searching for Faint Companions to Nearby Stars with the Hubble Space Telescope

NASA Technical Reports Server (NTRS)

Schroeder, Daniel J.; Golimowski, David A.

1996-01-01

A search for faint companions (FC's) to selected stars within 5 pc of the Sun using the Hubble Space Telescope's Planetary Camera (PC) has been initiated. To assess the PC's ability to detect FCs, we have constructed both model and laboratory-simulated images and compared them to actual PC images. We find that the PC's point-spread function (PSF) is 3-4 times brighter over the angular range 2-5 sec than the PSF expected for a perfect optical system. Azimuthal variations of the PC's PSF are 10-20 times larger than expected for a perfect PSF. These variations suggest that light is scattered nonuniformly from the surface of the detector. Because the anomalies in the PC's PSF cannot be precisely simulated, subtracting a reference PSF from the PC image is problematic. We have developed a computer algorithm that identifies local brightness anomalies within the PSF as potential FCs. We find that this search algorithm will successfully locate FCs anywhere within the circumstellar field provided that the average pixel signal from the FC is at least 10 sigma above the local background. This detection limit suggests that a comprehensive search for extrasolar Jovian planets with the PC is impractical. However, the PC is useful for detecting other types of substellar objects. With a stellar signal of 10(exp 9) e(-), for example, we may detect brown dwarfs as faint as M(sub I) = 16.7 separated by 1 sec from alpha Cen A.

System of experts for intelligent data management (SEIDAM)

NASA Technical Reports Server (NTRS)

Goodenough, David G.; Iisaka, Joji; Fung, KO

1993-01-01

A proposal to conduct research and development on a system of expert systems for intelligent data management (SEIDAM) is being developed. CCRS has much expertise in developing systems for integrating geographic information with space and aircraft remote sensing data and in managing large archives of remotely sensed data. SEIDAM will be composed of expert systems grouped in three levels. At the lowest level, the expert systems will manage and integrate data from diverse sources, taking account of symbolic representation differences and varying accuracies. Existing software can be controlled by these expert systems, without rewriting existing software into an Artificial Intelligence (AI) language. At the second level, SEIDAM will take the interpreted data (symbolic and numerical) and combine these with data models. at the top level, SEIDAM will respond to user goals for predictive outcomes given existing data. The SEIDAM Project will address the research areas of expert systems, data management, storage and retrieval, and user access and interfaces.

System of Experts for Intelligent Data Management (SEIDAM)

NASA Technical Reports Server (NTRS)

Goodenough, David G.; Iisaka, Joji; Fung, KO

1992-01-01

It is proposed to conduct research and development on a system of expert systems for intelligent data management (SEIDAM). CCRS has much expertise in developing systems for integrating geographic information with space and aircraft remote sensing data and in managing large archives of remotely sensed data. SEIDAM will be composed of expert systems grouped in three levels. At the lowest level, the expert systems will manage and integrate data from diverse sources, taking account of symbolic representation differences and varying accuracies. Existing software can be controlled by these expert systems, without rewriting existing software into an Artificial Intelligence (AI) language. At the second level, SEIDAM will take the interpreted data (symbolic and numerical) and combine these with data models. At the top level, SEIDAM will respond to user goals for predictive outcomes given existing data. The SEIDAM Project will address the research areas of expert systems, data management, storage and retrieval, and user access and interfaces.

TES: A modular systems approach to expert system development for real-time space applications

NASA Technical Reports Server (NTRS)

Cacace, Ralph; England, Brenda

1988-01-01

A major goal of the Space Station era is to reduce reliance on support from ground based experts. The development of software programs using expert systems technology is one means of reaching this goal without requiring crew members to become intimately familiar with the many complex spacecraft subsystems. Development of an expert systems program requires a validation of the software with actual flight hardware. By combining accurate hardware and software modelling techniques with a modular systems approach to expert systems development, the validation of these software programs can be successfully completed with minimum risk and effort. The TIMES Expert System (TES) is an application that monitors and evaluates real time data to perform fault detection and fault isolation tasks as they would otherwise be carried out by a knowledgeable designer. The development process and primary features of TES, a modular systems approach, and the lessons learned are discussed.

A synchronized multipoint vision-based system for displacement measurement of civil infrastructures.

PubMed

Ho, Hoai-Nam; Lee, Jong-Han; Park, Young-Soo; Lee, Jong-Jae

2012-01-01

This study presents an advanced multipoint vision-based system for dynamic displacement measurement of civil infrastructures. The proposed system consists of commercial camcorders, frame grabbers, low-cost PCs, and a wireless LAN access point. The images of target panels attached to a structure are captured by camcorders and streamed into the PC via frame grabbers. Then the displacements of targets are calculated using image processing techniques with premeasured calibration parameters. This system can simultaneously support two camcorders at the subsystem level for dynamic real-time displacement measurement. The data of each subsystem including system time are wirelessly transferred from the subsystem PCs to master PC and vice versa. Furthermore, synchronization process is implemented to ensure the time synchronization between the master PC and subsystem PCs. Several shaking table tests were conducted to verify the effectiveness of the proposed system, and the results showed very good agreement with those from a conventional sensor with an error of less than 2%.

A Synchronized Multipoint Vision-Based System for Displacement Measurement of Civil Infrastructures

PubMed Central

Ho, Hoai-Nam; Lee, Jong-Han; Park, Young-Soo; Lee, Jong-Jae

2012-01-01

This study presents an advanced multipoint vision-based system for dynamic displacement measurement of civil infrastructures. The proposed system consists of commercial camcorders, frame grabbers, low-cost PCs, and a wireless LAN access point. The images of target panels attached to a structure are captured by camcorders and streamed into the PC via frame grabbers. Then the displacements of targets are calculated using image processing techniques with premeasured calibration parameters. This system can simultaneously support two camcorders at the subsystem level for dynamic real-time displacement measurement. The data of each subsystem including system time are wirelessly transferred from the subsystem PCs to master PC and vice versa. Furthermore, synchronization process is implemented to ensure the time synchronization between the master PC and subsystem PCs. Several shaking table tests were conducted to verify the effectiveness of the proposed system, and the results showed very good agreement with those from a conventional sensor with an error of less than 2%. PMID:23028250

ACS sampling system: design, implementation, and performance evaluation

NASA Astrophysics Data System (ADS)

Di Marcantonio, Paolo; Cirami, Roberto; Chiozzi, Gianluca

2004-09-01

By means of ACS (ALMA Common Software) framework we designed and implemented a sampling system which allows sampling of every Characteristic Component Property with a specific, user-defined, sustained frequency limited only by the hardware. Collected data are sent to various clients (one or more Java plotting widgets, a dedicated GUI or a COTS application) using the ACS/CORBA Notification Channel. The data transport is optimized: samples are cached locally and sent in packets with a lower and user-defined frequency to keep network load under control. Simultaneous sampling of the Properties of different Components is also possible. Together with the design and implementation issues we present the performance of the sampling system evaluated on two different platforms: on a VME based system using VxWorks RTOS (currently adopted by ALMA) and on a PC/104+ embedded platform using Red Hat 9 Linux operating system. The PC/104+ solution offers, as an alternative, a low cost PC compatible hardware environment with free and open operating system.

Planetary data analysis and display system: A version of PC-McIDAS

NASA Technical Reports Server (NTRS)

Limaye, Sanjay S.; Sromovsky, L. A.; Saunders, R. S.; Martin, Michael

1993-01-01

We propose to develop a system for access and analysis of planetary data from past and future space missions based on an existing system, the PC-McIDAS workstation. This system is now in use in the atmospheric science community for access to meteorological satellite and conventional weather data. The proposed system would be usable not only by planetary atmospheric researchers but also by the planetary geologic community. By providing the critical tools of an efficient system architecture, newer applications and customized user interfaces can be added by the end user within such a system.

Autonomously acquiring declarative and procedural knowledge for ICAT systems

NASA Technical Reports Server (NTRS)

Kovarik, Vincent J., Jr.

1993-01-01

The construction of Intelligent Computer Aided Training (ICAT) systems is critically dependent on the ability to define and encode knowledge. This knowledge engineering effort can be broadly divided into two categories: domain knowledge and expert or task knowledge. Domain knowledge refers to the physical environment or system with which the expert interacts. Expert knowledge consists of the set of procedures and heuristics employed by the expert in performing their task. Both these areas are a significant bottleneck in the acquisition of knowledge for ICAT systems. This paper presents a research project in the area of autonomous knowledge acquisition using a passive observation concept. The system observes an expert and then generalizes the observations into production rules representing the domain expert's knowledge.

Expert networks in CLIPS

NASA Technical Reports Server (NTRS)

Hruska, S. I.; Dalke, A.; Ferguson, J. J.; Lacher, R. C.

1991-01-01

Rule-based expert systems may be structurally and functionally mapped onto a special class of neural networks called expert networks. This mapping lends itself to adaptation of connectionist learning strategies for the expert networks. A parsing algorithm to translate C Language Integrated Production System (CLIPS) rules into a network of interconnected assertion and operation nodes has been developed. The translation of CLIPS rules to an expert network and back again is illustrated. Measures of uncertainty similar to those rules in MYCIN-like systems are introduced into the CLIPS system and techniques for combining and hiring nodes in the network based on rule-firing with these certainty factors in the expert system are presented. Several learning algorithms are under study which automate the process of attaching certainty factors to rules.

RAMBOT: A Connectionist Expert System That Learns by Example.

ERIC Educational Resources Information Center

Mozer, Michael C.

One solution to the problem of getting expert knowledge into expert systems would be to endow the systems with powerful learning procedures that could discover appropriate behaviors by observing an expert in action. A promising source of such learning procedures can be found in recent work on connectionist networks, which are massively parallel…

A versatile nondestructive evaluation imaging workstation

NASA Technical Reports Server (NTRS)

Chern, E. James; Butler, David W.

1994-01-01

Ultrasonic C-scan and eddy current imaging systems are of the pointwise type evaluation systems that rely on a mechanical scanner to physically maneuver a probe relative to the specimen point by point in order to acquire data and generate images. Since the ultrasonic C-scan and eddy current imaging systems are based on the same mechanical scanning mechanisms, the two systems can be combined using the same PC platform with a common mechanical manipulation subsystem and integrated data acquisition software. Based on this concept, we have developed an IBM PC-based combined ultrasonic C-scan and eddy current imaging system. The system is modularized and provides capacity for future hardware and software expansions. Advantages associated with the combined system are: (1) eliminated duplication of the computer and mechanical hardware, (2) unified data acquisition, processing and storage software, (3) reduced setup time for repetitious ultrasonic and eddy current scans, and (4) improved system efficiency. The concept can be adapted to many engineering systems by integrating related PC-based instruments into one multipurpose workstation such as dispensing, machining, packaging, sorting, and other industrial applications.

A versatile nondestructive evaluation imaging workstation

NASA Astrophysics Data System (ADS)

Chern, E. James; Butler, David W.

1994-02-01

Ultrasonic C-scan and eddy current imaging systems are of the pointwise type evaluation systems that rely on a mechanical scanner to physically maneuver a probe relative to the specimen point by point in order to acquire data and generate images. Since the ultrasonic C-scan and eddy current imaging systems are based on the same mechanical scanning mechanisms, the two systems can be combined using the same PC platform with a common mechanical manipulation subsystem and integrated data acquisition software. Based on this concept, we have developed an IBM PC-based combined ultrasonic C-scan and eddy current imaging system. The system is modularized and provides capacity for future hardware and software expansions. Advantages associated with the combined system are: (1) eliminated duplication of the computer and mechanical hardware, (2) unified data acquisition, processing and storage software, (3) reduced setup time for repetitious ultrasonic and eddy current scans, and (4) improved system efficiency. The concept can be adapted to many engineering systems by integrating related PC-based instruments into one multipurpose workstation such as dispensing, machining, packaging, sorting, and other industrial applications.

Tools and technologies for expert systems: A human factors perspective

NASA Technical Reports Server (NTRS)

Rajaram, Navaratna S.

1987-01-01

It is widely recognized that technologies based on artificial intelligence (AI), especially expert systems, can make significant contributions to the productivity and effectiveness of operations of information and knowledge intensive organizations such as NASA. At the same time, these being relatively new technologies, there is the problem of transfering technology to key personnel of such organizations. The problems of examining the potential of expert systems and of technology transfer is addressed in the context of human factors applications. One of the topics of interest was the investigation of the potential use of expert system building tools, particularly NEXPERT as a technology transfer medium. Two basic conclusions were reached in this regard. First, NEXPERT is an excellent tool for rapid prototyping of experimental expert systems, but not ideal as a delivery vehicle. Therefore, it is not a substitute for general purpose system implementation languages such a LISP or C. This assertion probably holds for nearly all such tools on the market today. Second, an effective technology transfer mechanism is to formulate and implement expert systems for problems which members of the organization in question can relate to. For this purpose, the LIghting EnGineering Expert (LIEGE) was implemented using NEXPERT as the tool for technology transfer and to illustrate the value of expert systems to the activities of the Man-System Division.

Photodynamic evaluation of tetracarboxy-phthalocyanines in model systems.

PubMed

Alonso, Lais; Sampaio, Renato N; Souza, Thalita F M; Silva, Rodrigo C; Neto, Newton M Barbosa; Ribeiro, Anderson O; Alonso, Antonio; Gonçalves, Pablo J

2016-08-01

The present work reports the synthesis, photophysical and photochemical characterization and photodynamic evaluation of zinc, aluminum and metal free-base tetracarboxy-phthalocyanines (ZnPc, AlPc and FbPc, respectively). To evaluate the possible application of phthalocyanines as a potential photosensitizer the photophysical and photochemical characterization were performed using aqueous (phosphate-buffered solution, PBS) and organic (dimethyl sulfoxide, DMSO) solvents. The relative lipophilicity of the compounds was estimated by the octanol-water partition coefficient and the photodynamic activity evaluated through the photooxidation of a protein and photohemolysis. The photooxidation rate constants (k) were obtained and the hemolytic potential was evaluated by the maximum percentage of hemolysis achieved (Hmax) and the time (t50) to reach 50% of the Hmax. Although these phthalocyanines are all hydrophilic and possess very low affinity for membranes (log PO/W=-2.0), they led to significant photooxidation of bovine serum albumin (BSA) and photohemolysis. Our results show that ZnPc was the most efficient photosensitizer, followed by AlPc and FbPc; this order is the same as the order of the triplet and singlet oxygen quantum yields (ZnPc>AlPc>FbPc). Furthermore, together, the triplet, fluorescence and singlet oxygen quantum yields of zinc tetracarboxy-phthalocyanines suggest their potential for use in theranostic applications, which simultaneously combines photodiagnosis and phototherapy. Copyright © 2016 Elsevier B.V. All rights reserved.

[Effect of mitogen activated protein kinase signal transduction on apoptosis of PC12 cells induced by electromagnetic exposure].

PubMed

Yang, Xue-Sen; Zhang, Wei; Gong, Qian-Fen

2008-06-01

To observe the effect of mitogen activated protein kinase (MAPK) signal transduction system on the apoptosis induced by electromagnetic exposure in PC12 cells. After pretreated by SB203580 alone or together with U0126, PC12 cells were exposed to 65 mW/cm(2) electromagnetic wave for 20 min. The phosphorylations of ERK1/2, JNK and P38 MAPK were tested by Western-blot at 3 h and 24 h after electromagnetic exposure. The apoptosis of PC12 cells were detected by Annexin-V-FITC flow cytometry. U0126, but not SB203580 could inhibit the activation of ERK1/2 induced by electromagnetic exposure. U0126 and SB203580 had no effects on the activation of JNK. SB203580 could inhibit the activation of P38 MAPK significantly. But U0126 had no such effect on the activation of P38 MAPK. After pretreated by SB203580 alone or together with U0126, the apoptosis of PC12 cells decreased. But the pretreatment by U0126 alone had no influence on the apoptosis of PC12 cells. The P38 MAPK signal transduction modulate the apoptosis of PC12 cells induced by electromagnetic exposure. ERK signal transduction has no effect on the apoptosis of PC12 cells. JNK signal transduction may promote the apoptosis of PC12 cells in the early stage after electromagnetic exposure.

Venom Protein C activators as diagnostic agents for defects of protein C System.

PubMed

Ramzan, Faiqah; Asmat, Andleeb

2018-06-18

Background Protein C is a vitamin K dependent plasma zymogen. It prevents clotting by inhibiting clotting by inactivating factor V and factor VIII. Protein C activation pathway involves three steps: (i) Activation of protein C; (ii) Inhibition of coagulation through inactivating factor V and VIII by activated protein C and (iii) Inhibition of activated protein C by plasma protease inhibitors specific for this enzyme. Proteinases converts the zymogen Protein C (PC) of vertebrates into activated PC, which has been detected in several snake venoms. Most PC activators have been purified from venom of snake species belonging to the genera of the Agkistrodon complex. Unlike the physiological thrombin-catalyzed PC activation reaction which requires thrombomodulin as a cofactor, most snake venom activators directly convert the zymogen PC into the catalytically active form which can easily be determined by means of coagulation or chromogenic substrate techniques. Conclusion The fast-acting PC activator Protac® from Agkistrodon contortrix (southern copperhead snake) venom has been found to have broad application in diagnostic practice for the determination of disorders in the PC pathway. Recently, screening assays for the PC pathway have been introduced, based on the observation that the PC pathway is probably the most important physiological barrier against thrombosis. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

Lane Detection on the iPhone

NASA Astrophysics Data System (ADS)

Ren, Feixiang; Huang, Jinsheng; Terauchi, Mutsuhiro; Jiang, Ruyi; Klette, Reinhard

A robust and efficient lane detection system is an essential component of Lane Departure Warning Systems, which are commonly used in many vision-based Driver Assistance Systems (DAS) in intelligent transportation. Various computation platforms have been proposed in the past few years for the implementation of driver assistance systems (e.g., PC, laptop, integrated chips, PlayStation, and so on). In this paper, we propose a new platform for the implementation of lane detection, which is based on a mobile phone (the iPhone). Due to physical limitations of the iPhone w.r.t. memory and computing power, a simple and efficient lane detection algorithm using a Hough transform is developed and implemented on the iPhone, as existing algorithms developed based on the PC platform are not suitable for mobile phone devices (currently). Experiments of the lane detection algorithm are made both on PC and on iPhone.

An Expert System Solution for the Quantitative Condition Assessment of Electrical Distribution Systems in the United States Air Force

DTIC Science & Technology

1991-09-01

Distribution system ... ......... 4 2. Architechture of an Expert system .. .............. 66 vi List of Tables Table Page 1. Prototype Component Model...expert system to properly process work requests Ln civil engineering (8:23). Electric Power Research Institute (EPRI). EPRI is a private organization ...used (51) Training Level. The level of training shop technicians receive, and the resulting proficiency, are important in all organizations . Experts 1

Research on an expert system for database operation of simulation-emulation math models. Volume 2, Phase 1: Results

NASA Technical Reports Server (NTRS)

Kawamura, K.; Beale, G. O.; Schaffer, J. D.; Hsieh, B. J.; Padalkar, S.; Rodriguez-Moscoso, J. J.

1985-01-01

A reference manual is provided for NESS, a simulation expert system. This manual gives user information regarding starting and operating NASA expert simulation system (NESS). This expert system provides an intelligent interface to a generic simulation program for spacecraft attitude control problems. A menu of the functions the system can perform is provided. Control repeated returns to this menu after executing each user request.

Development of a coupled expert system for the spacecraft attitude control problem

NASA Technical Reports Server (NTRS)

Kawamura, K.; Beale, G.; Schaffer, J.; Hsieh, B.-J.; Padalkar, S.; Rodriguezmoscoso, J.; Vinz, F.; Fernandez, K.

1987-01-01

A majority of the current expert systems focus on the symbolic-oriented logic and inference mechanisms of artificial intelligence (AI). Common rule-based systems employ empirical associations and are not well suited to deal with problems often arising in engineering. Described is a prototype expert system which combines both symbolic and numeric computing. The expert system's configuration is presented and its application to a spacecraft attitude control problem is discussed.

NIR camera and spectrograph SWIMS for TAO 6.5m telescope: array control system and its performance

NASA Astrophysics Data System (ADS)

Terao, Yasunori; Motohara, Kentaro; Konishi, Masahiro; Takahashi, Hidenori; Kato, Natsuko M.; Kitagawa, Yutaro; Kobayakawa, Yutaka; Ohashi, Hirofumi; Tateuchi, Ken; Todo, Soya

2016-08-01

SWIMS (Simultaneous-color Wide-field Infrared Multi-object Spectrograph) is a near-infrared imager and multi-object spectrograph as one of the first generation instruments for the University of Tokyo Atacama Observatory (TAO) 6.5m telescope. In this paper, we describe an array control system of SWIMS and results of detector noise performance evaluation. SWIMS incorporates four (and eight in future) HAWAII-2RG focal plane arrays for detectors, each driven by readout electronics components: a SIDECAR ASIC and a JADE2 Card. The readout components are controlled by a HAWAII-2RG Testing Software running on a virtual Windows machine on a Linux PC called array control PC. All of those array control PCs are then supervised by a SWIMS control PC. We have developed an "array control software system", which runs on the array control PC to control the HAWAII-2RG Testing Software, and consists of a socket client and a dedicated server called device manager. The client runs on the SWIMS control PC, and the device manager runs on the array control PC. An exposure command, issued by the client on the SWIMS control PC, is sent to the multiple device managers on the array control PCs, and then multiple HAWAII-2RGs are driven simultaneously. Using this system, we evaluate readout noise performances of the detectors, both in a test dewar and in a SWIMS main dewar. In the test dewar, we confirm the readout noise to be 4.3 e- r.m.s. by 32 times multiple sampling when we operate only a single HAWAII-2RG, whereas in the case of simultaneous driving of two HAWAII-2RGs, we still obtain sufficiently low readout noise of 10 e- r.m.s. In the SWIMS main dewar, although there are some differences between the detectors, the readout noise is measured to be 4:1-4:6 e- r.m.s. with simultaneous driving by 64 times multiple sampling, which meets the requirement for background-limited observations in J band of 14 e- r.m.s..

Hiding in plain sight

NASA Astrophysics Data System (ADS)

Riedel, Adric Richard

2012-05-01

Since the first successful measurements of stellar trigonometric parallax in the 1830s, the study of nearby stars has focused on the highest proper motion stars (micro > 0.18″ yr-1). Those high proper motion stars have formed the backbone of the last 150 years of study of the Solar Neighborhood and the composition of the Galaxy. Statistically speaking, though, there is a population of stars that will have low proper motions when their space motions have been projected onto the sky. At the same time, over the last twenty years, populations of relatively young stars (less than ˜ 100 Myr), most of them with low proper motions, have been revealed near (< 100 pc) the Sun. This dissertation is the result of two related projects: A photometric search for nearby (< 25pc) southern-hemisphere M dwarf stars with low proper motions (micro < 0.18″ yr-1), and a search for nearby (< 100 pc) pre-main-sequence (< 125 Myr old) M dwarf systems. The projects rely on a variety of photometric, spectroscopic, and astrometric analyses (including parallaxes from our program) using data from telescopes at CTIO via the SMARTS Consortium and at Lowell Observatory. Within this dissertation, I describe the identification and confirmation of 23 new nearby low proper motion M dwarf systems within 25 pc, 8 of which are within 15 pc (50% of the anticipated low-proper-motion 15 pc sample). I also report photometric, spectroscopic, and astrometric parameters and identifications for a selection of 25 known and new candidate nearby young M dwarfs, including new low-mass members of the TW Hydra, beta Pictoris, Tucana-Horologium, Argus, and AB Doradus associations, following the methods of my Riedel et al. (2011) paper and its discovery of AP Col, the closest pre-main-sequence star to the Solar System. These low proper motion and nearby star discoveries are put into the context of the Solar Neighborhood as a whole by means of the new RECONS 25 pc Database, to which I have now added (including my Riedel et al. (2010) paper) 81 star systems (4% of the total). INDEX WORDS: Astronomy, Astrometry, Photometry, Spectroscopy, Kinematics, Proper motion, Parallax, Nearby stars, Low-mass stars, Young stars, Pre-main-sequence stars.

An overview of the USL/DBMS NASA/PC R and D project working paper series

NASA Technical Reports Server (NTRS)

Dominick, Wayne D. (Editor)

1984-01-01

An introduction is given to the University of Southwestern Louisiana Data Base Management System (USL/DBMS) NASA/PC R and D Working Paper Series which has been established to provide a foundation for both a formal and informal information dissemination mechanism concerning PC-based research and development activities being performed pursuant to the NASA contract. This entry also serves as an index to the collection of Working Paper Series reports.

Naproxen-PC: a GI safe and highly effective anti-inflammatory.

PubMed

Lichtenberger, L M; Romero, J J; Dial, E J; Moore, J E

2009-02-01

We have been developing a family of phosphatidylcholine (PC)-associated NSAIDs, which appear to have improved GI safety and therapeutic efficacy in both rodent model systems and pilot clinical trials. As naproxen has been demonstrated to be associated with the lowest cardiovascular adverse events in comparison with both COX-2 selective inhibitors and conventional NSAIDs, we have been developing a Naproxen-PC formulation for evaluation in animal models and clinical trials. We have determined that an oil-based formulation of naproxen and triple strength soy lecithin provides excellent GI protection in both: 1) an acute NSAID-induced intestinal bleeding model in rats pretreated with L-NAME that are intragastrically administered a single dose of naproxen (at a dose of 50 mg/kg) vs the equivalent dose of Naproxen-PC; and 2) a more chronic model (at a naproxen dose of 25 mg/kg BID) in rats that have pre-existing hindpaw inflammation (induced with a intradermal injection of Complete Freund's Adjuvant/CFA). Both models demonstrate the superior GI safety of Naproxen-PC vs naproxen while this novel formulation had significant anti-inflammatory efficacy to reduce hindpaw edema and the generation of PGE(2) in the collected joint synovial fluid. Naproxen-PC appears to induce significantly less GI injury and bleeding in two rodent model systems while maintaining anti-inflammatory and COX-inhibitory activity.

Developing Effective Collaboration Between Primary Care and Mental Health Providers

PubMed Central

Felker, Bradford L.; Chaney, Edmund; Rubenstein, Lisa V.; Bonner, Laura M.; Yano, Elizabeth M.; Parker, Louise E.; Worley, Linda L. M.; Sherman, Scott E.; Ober, Scott

2006-01-01

Objective: Improving care for depressed primary care (PC) patients requires system-level interventions based on chronic illness management with collaboration among primary care providers (PCPs) and mental health providers (MHPs). We describe the development of an effective collaboration system for an ongoing multisite Department of Veterans Affairs (VA) study evaluating a multifaceted program to improve management of major depression in PC practices. Method: Translating Initiatives for Depression into Effective Solutions (TIDES) is a research project that helps VA facilities adopt depression care improvements for PC patients with depression. A regional telephone-based depression care management program used Depression Case Managers (DCMs) supervised by MHPs to assist PCPs with patient management. The Collaborative Care Workgroup (CWG) was created to facilitate collaboration between PCPs, MHPs, and DCMs. The CWG used a 3-phase process: (1) identify barriers to better depression treatment, (2) identify target problems and solutions, and (3) institutionalize ongoing problem detection and solution through new policies and procedures. Results: The CWG overcame barriers that exist between PCPs and MHPs, leading to high rates of the following: patients with depression being followed by PCPs (82%), referred PC patients with depression keeping their appointments with MHPs (88%), and PC patients with depression receiving antidepressants (76%). The CWG helped sites implement site-specific protocols for addressing patients with suicidal ideation. Conclusion: By applying these steps in PC practices, collaboration between PCPs and MHPs has been improved and maintained. These steps offer a guide to improving collaborative care to manage depression or other chronic disorders within PC clinics. PMID:16862248

Micro hot embossing for high-aspect-ratio structure with materials flow enhancement by polymer sheet

NASA Astrophysics Data System (ADS)

Murakoshi, Yoichi; Shan, Xue-Chuan; Sano, Toshio; Takahashi, Masaharu; Maeda, Ryutaro

2004-04-01

Nano imprinting or Nano embossing process have been introduced to fabricate semiconductor, optical device and Micro Electro Mechanical Systems (MEMS) and the Nano Electro Mechanical Systems (NEMS) to reduce the fabrication cost. In our previous paper, micro hot embossing of Polycarbonate (PC) and Polyetheretherketone (PEEK) for optical switch with 8x8 mirrors was reported. The PC and PEEK sheets were embossed at elevated temperature with an embossing machine designed for the MEMS. In the application, the mirrors on the optical switch had some defects, such as slump, sticking and step at side of the mirror, due to embossing process and process conditions. These defects are attributed to the poor materials flow of plastics into the e Ni mold cavity of complicate shape with different aspect ratio. Therefore, the micro hot embossing is optimized in this paper with PTFE sheet to enhance the materials flow. In this paper, the PC and the PEEK sheets, thickness of 300um, are embossed at elevated temperature with the hot embossing machine with a Nickel mold. To control material flow of the PC or the PEEK sheets, Polytetrafluoroethylene (PTFE) sheet, the thickness of 100um, is placed on the PC or the PEEK sheets at elevated temperature. Mirror shape was transferred with better fidelity on the PC and PEEK sheet, and the thickness of cantilever became thinner than previous embossed structure without the PTFE. Especially, the mirror height and the thickness of cantilever on the PC have been improved at lower embossing temperature.

An Expert System for Diagnosing Eye Diseases using Forward Chaining Method

NASA Astrophysics Data System (ADS)

Munaiseche, C. P. C.; Kaparang, D. R.; Rompas, P. T. D.

2018-02-01

Expert System is a system that seeks to adopt human knowledge to the computer, so that the computer can solve problems which are usually done by experts. The purpose of medical expert system is to support the diagnosis process of physicians. It considers facts and symptoms to provide diagnosis. This implies that a medical expert system uses knowledge about diseases and facts about the patients to suggest diagnosis. The aim of this research is to design an expert system application for diagnosing eye diseases using forward chaining method and to figure out user acceptance to this application through usability testing. Eye is selected because it is one of the five senses which is very sensitive and important. The scope of the work is extended to 16 types of eye diseases with 41 symptoms of the disease, arranged in 16 rules. The computer programming language employed was the PHP programming language and MySQL as the Relational Database Management System (RDBMS). The results obtained showed that the expert system was able to successfully diagnose eye diseases corresponding to the selected symptoms entered as query and the system evaluation through usability testing showed the expert system for diagnosis eye diseases had very good rate of usability, which includes learnability, efficiency, memorability, errors, and satisfaction so that the system can be received in the operational environment.

Functional manganese dioxide nanosheet for targeted photodynamic therapy and bioimaging in vitro and in vivo

NASA Astrophysics Data System (ADS)

Kim, Seongchan; Ahn, Seong Min; Lee, Ji-Seon; Kim, Tae Shik; Min, Dal-Hee

2017-06-01

Photodynamic therapy (PDT) has been widely studied as a promising non-invasive therapeutic strategy for the treatment of cancer. However, the poor solubility of photosensitizer (PS) in aqueous solution and inefficient cell-penetrating capability have limited the target-specific PDT. Herein, we develop a novel targeted photodynamic therapeutic and bioimaging system based on folic acid (FA)-conjugated MnO2 (FA-MnO2) nanosheet as a new carrier of PS, zinc phthalocyanine (ZnPc). ZnPc loaded FA-MnO2 nanosheet (FA-MnO2/ZnPc) complex is successfully formed by electrostatic interaction and coordination. We find that FA-MnO2/ZnPc complex exhibits excellent targeted delivery of ZnPc into folate receptor positive cancer cells and the ZnPc is released out from the complex via endogenous glutathione (GSH) stimulus, facilitating simultaneous bioimaging and targeted PDT by singlet oxygen (SO) generation upon light irradiation, showing high efficacy with only one tenth of conventional PS dosage in vitro and in vivo.

[Development of expert diagnostic system for common respiratory diseases].

PubMed

Xu, Wei-hua; Chen, You-ling; Yan, Zheng

2014-03-01

To develop an internet-based expert diagnostic system for common respiratory diseases. SaaS system was used to build architecture; pattern of forward reasoning was applied for inference engine design; ASP.NET with C# from the tool pack of Microsoft Visual Studio 2005 was used for website-interview medical expert system.The database of the system was constructed with Microsoft SQL Server 2005. The developed expert system contained large data memory and high efficient function of data interview and data analysis for diagnosis of various diseases.The users were able to perform this system to obtain diagnosis for common respiratory diseases via internet. The developed expert system may be used for internet-based diagnosis of various respiratory diseases,particularly in telemedicine setting.

A Cost Effective System Design Approach for Critical Space Systems

NASA Technical Reports Server (NTRS)

Abbott, Larry Wayne; Cox, Gary; Nguyen, Hai

2000-01-01

NASA-JSC required an avionics platform capable of serving a wide range of applications in a cost-effective manner. In part, making the avionics platform cost effective means adhering to open standards and supporting the integration of COTS products with custom products. Inherently, operation in space requires low power, mass, and volume while retaining high performance, reconfigurability, scalability, and upgradability. The Universal Mini-Controller project is based on a modified PC/104-Plus architecture while maintaining full compatibility with standard COTS PC/104 products. The architecture consists of a library of building block modules, which can be mixed and matched to meet a specific application. A set of NASA developed core building blocks, processor card, analog input/output card, and a Mil-Std-1553 card, have been constructed to meet critical functions and unique interfaces. The design for the processor card is based on the PowerPC architecture. This architecture provides an excellent balance between power consumption and performance, and has an upgrade path to the forthcoming radiation hardened PowerPC processor. The processor card, which makes extensive use of surface mount technology, has a 166 MHz PowerPC 603e processor, 32 Mbytes of error detected and corrected RAM, 8 Mbytes of Flash, and I Mbytes of EPROM, on a single PC/104-Plus card. Similar densities have been achieved with the quad channel Mil-Std-1553 card and the analog input/output cards. The power management built into the processor and its peripheral chip allows the power and performance of the system to be adjusted to meet the requirements of the application, allowing another dimension to the flexibility of the Universal Mini-Controller. Unique mechanical packaging allows the Universal Mini-Controller to accommodate standard COTS and custom oversized PC/104-Plus cards. This mechanical packaging also provides thermal management via conductive cooling of COTS boards, which are typically designed for convection cooling methods.

Knowledge-based systems for power management

NASA Technical Reports Server (NTRS)

Lollar, L. F.

1992-01-01

NASA-Marshall's Electrical Power Branch has undertaken the development of expert systems in support of further advancements in electrical power system automation. Attention is given to the features (1) of the Fault Recovery and Management Expert System, (2) a resource scheduler or Master of Automated Expert Scheduling Through Resource Orchestration, and (3) an adaptive load-priority manager, or Load Priority List Management System. The characteristics of an advisory battery manager for the Hubble Space Telescope, designated the 'nickel-hydrogen expert system', are also noted.

Enforcing positivity in intrusive PC-UQ methods for reactive ODE systems

DOE PAGES

Najm, Habib N.; Valorani, Mauro

2014-04-12

We explore the relation between the development of a non-negligible probability of negative states and the instability of numerical integration of the intrusive Galerkin ordinary differential equation system describing uncertain chemical ignition. To prevent this instability without resorting to either multi-element local polynomial chaos (PC) methods or increasing the order of the PC representation in time, we propose a procedure aimed at modifying the amplitude of the PC modes to bring the probability of negative state values below a user-defined threshold. This modification can be effectively described as a filtering procedure of the spectral PC coefficients, which is applied on-the-flymore » during the numerical integration when the current value of the probability of negative states exceeds the prescribed threshold. We demonstrate the filtering procedure using a simple model of an ignition process in a batch reactor. This is carried out by comparing different observables and error measures as obtained by non-intrusive Monte Carlo and Gauss-quadrature integration and the filtered intrusive procedure. Lastly, the filtering procedure has been shown to effectively stabilize divergent intrusive solutions, and also to improve the accuracy of stable intrusive solutions which are close to the stability limits.« less

The Grim Reaper, Hounds of Hell, and Dr. Death: The Role of Storytelling for Palliative Care in Competing Medical Meaning Systems.

PubMed

Omilion-Hodges, Leah M; Swords, Nathan M

2017-10-01

Palliative care (PC) is a medical specialty that strives to fulfill the physical, psychosocial, emotional, practical, and spiritual needs of individuals at end of life or in tandem with curative treatment. Although exponentially rising in use and beneficial to patient well-being at end of life, the purpose of PC is often misunderstood and those providing its services frequently report resistance from organizational members. Such resistance can be attributed to tensions between traditional biomedical models of medicine that privilege curative treatment and biosocial models of medicine that holistically care for patients. Thus, this study addresses what tensions PC providers experience in their institutions and what communicative strategies they use at the interpersonal level in managing those tensions. Using structuration theory in tandem with relational dialectics theory, we inductively analyzed semistructured interviews with 24 Circle of Life award-winning PC providers. Findings indicate two dialectics experienced by PC providers in their institutions: the living-dying dialectic and the practicing-advocating dialectic. We conclude that these interpersonal dialectics emerge through interaction in competing medical meaning systems and found that storytelling was a particularly salient form of communication that participants used for management.

Reference standards, judges, and comparison subjects: roles for experts in evaluating system performance.

PubMed

Hripcsak, George; Wilcox, Adam

2002-01-01

Medical informatics systems are often designed to perform at the level of human experts. Evaluation of the performance of these systems is often constrained by lack of reference standards, either because the appropriate response is not known or because no simple appropriate response exists. Even when performance can be assessed, it is not always clear whether the performance is sufficient or reasonable. These challenges can be addressed if an evaluator enlists the help of clinical domain experts. 1) The experts can carry out the same tasks as the system, and then their responses can be combined to generate a reference standard. 2)The experts can judge the appropriateness of system output directly. 3) The experts can serve as comparison subjects with which the system can be compared. These are separate roles that have different implications for study design, metrics, and issues of reliability and validity. Diagrams help delineate the roles of experts in complex study designs.

Call-duration and triage decisions in out of hours cooperatives with and without the use of an expert system.

PubMed

Ong, Rob S G; Post, Johan; van Rooij, Harry; de Haan, Jan

2008-02-13

Cooperatives delivering out of hours care in the Netherlands are hesitant about the use of expert systems during triage. Apart from the extra costs, cooperatives are not sure that quality of triage is sufficiently enhanced by these systems and believe that call duration will be prolonged drastically. No figures about the influence of the use of an expert system during triage on call duration and triage decisions in out of hours care in the Netherlands are available. Electronically registered data concerning call duration and triage decisions were collected in two cooperatives. One in Tilburg, a cooperative in a Southern city of the Netherlands using an expert system, and one in Groningen, a cooperative in a Northern city not using an expert system. Some other relevant information about the care process was collected additionally. Data about call duration was compared using an independent sample t-test. Data about call decisions was compared using Chi Square. The mean call time in the cooperative using the TAS expert system is 4.6 minutes, in the cooperative not using the expert system 3.9 minutes. A significant difference of 0.7 minutes (0.4 - 1.0, 95% CI) minutes. In the cooperative with an expert system a larger percentage of patients is handled by the assistant, patients are less often referred to a telephone consultation with the GP and are less likely to be offered a visit by the GP.A quick interpretation of the impact of the difference in triage decisions, show that these may be large enough to support the hypothesis that longer call duration is compensated for by less contacts with the GP (by telephone or face-to-face). There is no proof, however, that these differences are caused by the use of the triage system. The larger amount of calls handled by the assistant may be partly caused by the fact that the assistants in the cooperative with an expert system more often consult the GP during triage. And it is not likely that the larger amount of home visits in Groningen can be attributed to the absence of an expert system. The expert system only offers advice whether a GP should be seen, not in which way (by consultation in the office or by home visit). The differences in call times between a cooperative using an expert system and a cooperative not using an expert system are small; 0.4 - 1.0 min. Differences in triage decisions were found, but it is not proven that these can be contributed to the use of an expert system.

Call-duration and triage decisions in out of hours cooperatives with and without the use of an expert system

PubMed Central

Ong, Rob SG; Post, Johan; van Rooij, Harry; de Haan, Jan

2008-01-01

Background Cooperatives delivering out of hours care in the Netherlands are hesitant about the use of expert systems during triage. Apart from the extra costs, cooperatives are not sure that quality of triage is sufficiently enhanced by these systems and believe that call duration will be prolonged drastically. No figures about the influence of the use of an expert system during triage on call duration and triage decisions in out of hours care in the Netherlands are available. Methods Electronically registered data concerning call duration and triage decisions were collected in two cooperatives. One in Tilburg, a cooperative in a Southern city of the Netherlands using an expert system, and one in Groningen, a cooperative in a Northern city not using an expert system. Some other relevant information about the care process was collected additionally. Data about call duration was compared using an independent sample t-test. Data about call decisions was compared using Chi Square. Results The mean call time in the cooperative using the TAS expert system is 4.6 minutes, in the cooperative not using the expert system 3.9 minutes. A significant difference of 0.7 minutes (0.4 – 1.0, 95% CI) minutes. In the cooperative with an expert system a larger percentage of patients is handled by the assistant, patients are less often referred to a telephone consultation with the GP and are less likely to be offered a visit by the GP. A quick interpretation of the impact of the difference in triage decisions, show that these may be large enough to support the hypothesis that longer call duration is compensated for by less contacts with the GP (by telephone or face-to-face). There is no proof, however, that these differences are caused by the use of the triage system. The larger amount of calls handled by the assistant may be partly caused by the fact that the assistants in the cooperative with an expert system more often consult the GP during triage. And it is not likely that the larger amount of home visits in Groningen can be attributed to the absence of an expert system. The expert system only offers advice whether a GP should be seen, not in which way (by consultation in the office or by home visit). Conclusion The differences in call times between a cooperative using an expert system and a cooperative not using an expert system are small; 0.4 – 1.0 min. Differences in triage decisions were found, but it is not proven that these can be contributed to the use of an expert system. PMID:18271970

The Potential of Computer-Based Expert Systems for Special Educators in Rural Settings.

ERIC Educational Resources Information Center

Parry, James D.; Ferrara, Joseph M.

Knowledge-based expert computer systems are addressing issues relevant to all special educators, but are particularly relevant in rural settings where human experts are less available because of distance and cost. An expert system is an application of artificial intelligence (AI) that typically engages the user in a dialogue resembling the…

Fire Effects, Education, and Expert Systems

Treesearch

Robert E. Martin

1987-01-01

Predicting the effects of fires in the year 2000 and beyond will be enhanced by the use of expert systems. Although our predictions may have broad confidence limits, expert systems should help us to improve the predictions and to focus on the areas where improved knowledge is most needed. The knowledge of experts can be incorporated into previously existing knowledge...

β4-integrin-mediated cytotoxic activity of AexU in human prostate cancer PC3 cells

PubMed Central

KUMANO, MASAFUMI; MIYAKE, HIDEAKI; ABOLGHAIT, SAID K.; BEHNSAWY, HOSNY M.; FUJISAWA, MASATO

2013-01-01

The present study aimed to characterize the cytotoxic activity of AexU, an effector-mediating type three secretion system (TTSS) of gram-negative bacteria, in human prostate cancer cells, focusing on the association with β4-integrin expression. The cytotoxic effects of AexU either alone or in combination with chemotherapeutic agents were evaluated using several human prostate cancer cell lines. Human prostate cancer PC3 cells, in which an expression vector containing siRNA targeting β4-integrin had been introduced, were established (PC3/sh-In), and the cytotoxic effects of AexU on the PC3/sh-In cells were compared with the PC3 cells that were transfected with a control vector (PC3/C). The expression levels of β4-integrin in the PC3 cells were markedly higher compared with those in the LNCaP or DU145 cells, and the cytotoxic effects of AexU in the PC3 cells were more pronounced compared with those in the LNCaP or DU145 cells. The sensitivity of the PC3 cells to docetaxel and cisplatin was significantly enhanced following treatment with AexU, resulting in a decrease in the IC50 of the two agents by ~90%. The cytotoxic effect of AexU in the PC3/C cells was more marked compared with that in the PC3/sh-In cells, and the phosphorylation of Akt in the PC3/C cells appeared to be significantly more inhibited by the treatment with AexU compared with the PC3/sh-In cells. In conclusion, treatment with AexU may be a useful therapeutic option for prostate cancer when β4-integrin is overexpressed. The treatment appears to exert its effects through growth inhibition and by enhancing the sensitivity of the cancer cells to chemotherapeutic agents. PMID:24179545

Knowing Our Neighbors: Six Young, Nearby Systems

NASA Astrophysics Data System (ADS)

Bartlett, Jennifer L.; Lurie, John C.; Ianna, Philip A.; Riedel, Adric R.; Winters, Jennifer G.; Finch, Charlie T.; Jao, Wei-Chun; Subasavage, John P.; Henry, Todd J.

2016-06-01

Obtaining a well-understood, volume-limited (and ultimately volume-complete) sample of nearby stars is necessary for determining a host of astrophysical quantities, including the stellar luminosity and mass functions, the stellar velocity distribution, and the stellar multiplicity fraction. Furthermore, such a sample provides insight into the local star formation history. Towards that end, the Research Consortium on Nearby Stars (RECONS) measures trigonometric parallaxes to establish which systems truly lie within the 25-pc radius of the Solar Neighborhood. Recent measurements with the CTIO/SMARTS 0.9-m telescope establish six new systems as members of the Solar Neighborhood and also potential members of young moving groups based on (a) CTIOPI astrometry and (b) radial velocities from the literature, where available: ● G 75-35 at a distance of 11.8±0.2 pc and G 161-71 at 13.5±0.3 pc are possible members of the Argus Association● LP 888-18 at a distance of 12.5±0.2 pc is a member of the AB Doradus Moving Group, while LP 834-32 at 17.3±0.6 pc and LP 870-65 at 18.2±0.5 pc are possible group members● LHS 6167AB at a distance of 9.68±0.09 pc is a possible member of the Hercules-Lyra Moving Group. To characterize these systems further, RECONS obtained VRI photometry for each, which range from 12.44-18.81 mag. in V. LP 834-32, LHS 6167AB, and G 161-71 demonstrated significant long-term variability in V-band; the first two appear to have flared in 2011 and 2012, respectively. Furthermore, CTIOPI 1.5-m spectroscopy identifies these systems as M3.5-M8.0 dwarfs. G 161-71 displayed strong Hα emission but weak sodium and potassium features.The Solar Neighborhood contains both young and old stars that can be observed more easily than their more distant counterparts, which allows their characteristics to be studied in greater detail.NSF grants AST 05-07711 and AST 09-08402, NASA-SIM, Georgia State University, the University of Virginia, Hampden-Sydney College, and the Levinson Fund of the Peninsula Community Foundation supported this research. CTIOPI was an NOAO Survey Program and continues as part of the SMARTS Consortium. We thank the SMARTS Consortium and the CTIO staff, who enable the small telescope operations at CTIO.

Expert system development methodology and the transition from prototyping to operations: FIESTA, a case study

NASA Technical Reports Server (NTRS)

Happell, Nadine; Miksell, Steve; Carlisle, Candace

1989-01-01

A major barrier in taking expert systems from prototype to operational status involves instilling end user confidence in the operational system. The software of different life cycle models is examined and the advantages and disadvantages of each when applied to expert system development are explored. The Fault Isolation Expert System for Tracking and data relay satellite system Applications (FIESTA) is presented as a case study of development of an expert system. The end user confidence necessary for operational use of this system is accentuated by the fact that it will handle real-time data in a secure environment, allowing little tolerance for errors. How FIESTA is dealing with transition problems as it moves from an off-line standalone prototype to an on-line real-time system is discussed.

Expert system development methodology and the transition from prototyping to operations - Fiesta, a case study

NASA Technical Reports Server (NTRS)

Happell, Nadine; Miksell, Steve; Carlisle, Candace

1989-01-01

A major barrier in taking expert systems from prototype to operational status involves instilling end user confidence in the operational system. The software of different life cycle models is examined and the advantages and disadvantages of each when applied to expert system development are explored. The Fault Isolation Expert System for Tracking and data relay satellite system Applications (FIESTA) is presented as a case study of development of an expert system. The end user confidence necessary for operational use of this system is accentuated by the fact that it will handle real-time data in a secure environment, allowing little tolerance for errors. How FIESTA is dealing with transition problems as it moves from an off-line standalone prototype to an on-line real-time system is discussed.

An Embedded Rule-Based Diagnostic Expert System in Ada

NASA Technical Reports Server (NTRS)

Jones, Robert E.; Liberman, Eugene M.

1992-01-01

Ada is becoming an increasingly popular programming language for large Government-funded software projects. Ada with it portability, transportability, and maintainability lends itself well to today's complex programming environment. In addition, expert systems have also assumed a growing role in providing human-like reasoning capability expertise for computer systems. The integration is discussed of expert system technology with Ada programming language, especially a rule-based expert system using an ART-Ada (Automated Reasoning Tool for Ada) system shell. NASA Lewis was chosen as a beta test site for ART-Ada. The test was conducted by implementing the existing Autonomous Power EXpert System (APEX), a Lisp-based power expert system, in ART-Ada. Three components, the rule-based expert systems, a graphics user interface, and communications software make up SMART-Ada (Systems fault Management with ART-Ada). The rules were written in the ART-Ada development environment and converted to Ada source code. The graphics interface was developed with the Transportable Application Environment (TAE) Plus, which generates Ada source code to control graphics images. SMART-Ada communicates with a remote host to obtain either simulated or real data. The Ada source code generated with ART-Ada, TAE Plus, and communications code was incorporated into an Ada expert system that reads the data from a power distribution test bed, applies the rule to determine a fault, if one exists, and graphically displays it on the screen. The main objective, to conduct a beta test on the ART-Ada rule-based expert system shell, was achieved. The system is operational. New Ada tools will assist in future successful projects. ART-Ada is one such tool and is a viable alternative to the straight Ada code when an application requires a rule-based or knowledge-based approach.

A Generic Expert Scheduling System Architecture and Toolkit: GUESS (Generically Used Expert Scheduling System)

NASA Technical Reports Server (NTRS)

Liebowitz, Jay; Krishnamurthy, Vijaya; Rodens, Ira; Houston, Chapman; Liebowitz, Alisa; Baek, Seung; Radko, Joe; Zeide, Janet

1996-01-01

Scheduling has become an increasingly important element in today's society and workplace. Within the NASA environment, scheduling is one of the most frequently performed and challenging functions. Towards meeting NASA's scheduling needs, a research version of a generic expert scheduling system architecture and toolkit has been developed. This final report describes the development and testing of GUESS (Generically Used Expert Scheduling System).

Assessing quality of life in patients with prostate cancer: a systematic and standardized comparison of available instruments.

PubMed

Schmidt, Stefanie; Garin, Olatz; Pardo, Yolanda; Valderas, José M; Alonso, Jordi; Rebollo, Pablo; Rajmil, Luis; Garcia-Forero, Carlos; Ferrer, Montse

2014-10-01

The objective was to obtain a standardized evaluation of available prostate cancer-specific quality of life instruments used in patients with early-stage disease. We carried out systematic literature reviews in the PubMed database to identify manuscripts which contained information regarding either the development process or metric properties of prostate cancer-specific quality of life instruments. Each instrument was evaluated by two experts, independently, using the Evaluating Measures of Patient-Reported Outcomes (EMPRO) tool. An overall and seven attribute-specific EMPRO scores were calculated (range 0-100, worst to best): measurement model, reliability, validity, responsiveness, interpretability, burden and alternative forms. Eight instruments and 57 manuscripts (2-15 per instrument) were identified. The Expanded Prostate Cancer Index Composite (EPIC) was the best rated (overall EMPRO score 83.1 points). Good results were also obtained by University of California Los Angeles-Prostate Cancer Index (UCLA-PCI), Patient-Oriented Prostate Utility Scale (PORPUS) and Prostate Cancer Quality of Life Instrument (PC-QoL) with 77.3, 70.5 and 64.8 points, respectively. These four instruments passed with distinction the validity and responsiveness evaluation. Insufficient reliability results were observed for UCLA-PCI and PORPUS. Current evidence supports the choice of EPIC, PORPUS or PC-QoL. Attribute-specific EMPRO results facilitate selecting the adequate instrument for every purpose. For longitudinal studies or clinical trials, where responsiveness is the priority, EPIC or PC-QoL should be considered. We recommend the PORPUS for economic evaluations because it allows cost-utility analysis, and EPIC short versions to minimize administration burden.

ATS displays: A reasoning visualization tool for expert systems

NASA Technical Reports Server (NTRS)

Selig, William John; Johannes, James D.

1990-01-01

Reasoning visualization is a useful tool that can help users better understand the inherently non-sequential logic of an expert system. While this is desirable in most all expert system applications, it is especially so for such critical systems as those destined for space-based operations. A hierarchical view of the expert system reasoning process and some characteristics of these various levels is presented. Also presented are Abstract Time Slice (ATS) displays, a tool to visualize the plethora of interrelated information available at the host inferencing language level of reasoning. The usefulness of this tool is illustrated with some examples from a prototype potable water expert system for possible use aboard Space Station Freedom.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mamajek, Eric E.; Bartlett, Jennifer L.; Finch, Charlie T.

LP 876-10 is a nearby active M4 dwarf in Aquarius at a distance of 7.6 pc. The star is a new addition to the 10 pc census, with a parallax measured via the REsearch Consortium On Nearby Stars (RECONS) astrometric survey on the Small and Moderate Aperture Research Telescope System's 0.9 m telescope. We demonstrate that the astrometry, radial velocity, and photometric data for LP 876-10 are consistent with the star being a third bound stellar component to the Fomalhaut multiple system, despite the star lying nearly 6° away from Fomalhaut A in the sky. The three-dimensional separation of LPmore » 876-10 from Fomalhaut is only 0.77 ± 0.01 pc, and 0.987 ± 0.006 pc from TW PsA (Fomalhaut B), well within the estimated tidal radius of the Fomalhaut system (1.9 pc). LP 876-10 shares the motion of Fomalhaut within ∼1 km s{sup –1}, and we estimate an interloper probability of ∼10{sup –5}. Neither our echelle spectroscopy nor astrometry are able to confirm the close companion to LP 876-10 reported in the Washington Double Star Catalog (WSI 138). We argue that the Castor Moving Group to which the Fomalhaut system purportedly belongs, is likely to be a dynamical stream, and hence membership to the group does not provide useful age constraints for group members. LP 876-10 (Fomalhaut C) has now risen from obscurity to become a rare example of a field M dwarf with well-constrained age (440 ± 40 Myr) and metallicity. Besides harboring a debris disk system and candidate planet, Fomalhaut now has two of the widest known stellar companions.« less

PC-PVT 2.0: An updated platform for psychomotor vigilance task testing, analysis, prediction, and visualization.

PubMed

Reifman, Jaques; Kumar, Kamal; Khitrov, Maxim Y; Liu, Jianbo; Ramakrishnan, Sridhar

2018-07-01

The psychomotor vigilance task (PVT) has been widely used to assess the effects of sleep deprivation on human neurobehavioral performance. To facilitate research in this field, we previously developed the PC-PVT, a freely available software system analogous to the "gold-standard" PVT-192 that, in addition to allowing for simple visual reaction time (RT) tests, also allows for near real-time PVT analysis, prediction, and visualization in a personal computer (PC). Here we present the PC-PVT 2.0 for Windows 10 operating system, which has the capability to couple PVT tests of a study protocol with the study's sleep/wake and caffeine schedules, and make real-time individualized predictions of PVT performance for such schedules. We characterized the accuracy and precision of the software in measuring RT, using 44 distinct combinations of PC hardware system configurations. We found that 15 system configurations measured RTs with an average delay of less than 10 ms, an error comparable to that of the PVT-192. To achieve such small delays, the system configuration should always use a gaming mouse as the means to respond to visual stimuli. We recommend using a discrete graphical processing unit for desktop PCs and an external monitor for laptop PCs. This update integrates a study's sleep/wake and caffeine schedules with the testing software, facilitating testing and outcome visualization, and provides near-real-time individualized PVT predictions for any sleep-loss condition considering caffeine effects. The software, with its enhanced PVT analysis, visualization, and prediction capabilities, can be freely downloaded from https://pcpvt.bhsai.org. Published by Elsevier B.V.

Repeated Administration of D-Amphetamine Induces Distinct Alterations in Behavior and Metabolite Levels in 129Sv and Bl6 Mouse Strains.

PubMed

Vanaveski, Taavi; Narvik, Jane; Innos, Jürgen; Philips, Mari-Anne; Ottas, Aigar; Plaas, Mario; Haring, Liina; Zilmer, Mihkel; Vasar, Eero

2018-01-01

The main goal of the study was to characterize the behavioral and metabolomic profiles of repeated administration (for 11 days) of d-amphetamine (AMPH, 3 mg/kg i. p.), indirect agonist of dopamine (DA), in widely used 129S6/SvEvTac (129Sv) and C57BL/6NTac (Bl6) mouse strains. Acute administration of AMPH (acute AMPH) induced significantly stronger motor stimulation in Bl6. However, repeated administration of AMPH (repeated AMPH) caused stronger motor sensitization in 129Sv compared acute AMPH. Body weight of 129Sv was reduced after repeated saline and AMPH, whereas no change occurred in Bl6. In the metabolomic study, acute AMPH induced an elevation of isoleucine and leucine, branched chain amino acids (BCAA), whereas the level of hexoses was reduced in Bl6. Both BCAAs and hexoses remained on level of acute AMPH after repeated AMPH in Bl6. Three biogenic amines [asymmetric dimethylarginine (ADMA), alpha-aminoadipic acid (alpha-AAA), kynurenine] were significantly reduced after repeated AMPH. Acute AMPH caused in 129Sv a significant reduction of valine, lysophosphatidylcholines (lysoPC a C16:0, lysoPC a C18:2, lysoPC a C20:4), phosphatidylcholine (PC) diacyls (PC aa C34:2, PC aa C36:2, PC aa C36:3, PC aa C36:4) and alkyl-acyls (PC ae C38:4, PC ae C40:4). However, repeated AMPH increased the levels of valine and isoleucine, long-chain acylcarnitines (C14, C14:1-OH, C16, C18:1), PC diacyls (PC aa C38:4, PC aa C38:6, PC aa C42:6), PC acyl-alkyls (PC ae C38:4, PC ae C40:4, PC ae C40:5, PC ae C40:6, PC ae C42:1, PC ae C42:3) and sphingolipids [SM(OH)C22:1, SM C24:0] compared to acute AMPH in 129Sv. Hexoses and kynurenine were reduced after repeated AMPH compared to saline in 129Sv. The established changes probably reflect a shift in energy metabolism toward lipid molecules in 129Sv because of reduced level of hexoses. Pooled data from both strains showed that the elevation of isoleucine and leucine was a prominent biomarker of AMPH-induced behavioral sensitization. Simultaneously a significant decline of hexoses, citrulline, ADMA, and kynurenine occurred. The reduced levels of kynurenine, ADMA, and citrulline likely reflect altered function of N-methyl-D-aspartate (NMDA) and NO systems caused by repeated AMPH. Altogether, 129Sv strain displays stronger sensitization toward AMPH and larger variance in metabolite levels than Bl6.

Two-Photon Study on the Electronic Interactions between the First Excited Singlet States in Carotenoid-Tetrapyrrole Dyads

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liao, Pen-Nan; Pillai, Smitha; Gust, Devens

Electronic interactions between the first excited states (S 1) of carotenoids (Car) of different conjugation lengths (8-11 double bonds) and phthalocyanines (Pc) in different Car-Pc dyad molecules were investigated by two-photon spectroscopy and compared with Car S 1-chlorophyll (Chl) interactions in photosynthetic light harvesting complexes (LHCs). The observation of Chl/Pc fluorescence after selective two-photon excitation of the Car S 1 state allowed sensitive monitoring of the flow of energy between Car S 1 and Pc or Chl. It is found that two-photon excitation excites to about 80% to 100% exclusively the carotenoid state Car S 1 and that only amore » small fraction of direct tetrapyrrole two-photon excitation occurs. Amide-linked Car-Pc dyads in tetrahydrofuran demonstrate a molecular gear shift mechanism in that effective Car S 1 → Pc energy transfer is observed in a dyad with 9 double bonds in the carotenoid, whereas in similar dyads with 11 double bonds in the carotenoid, the Pc fluorescence is strongly quenched by Pc → Car S 1 energy transfer. In phenylamino-linked Car-Pc dyads in toluene extremely large electronic interactions between the Car S 1 state and Pc were observed, particularly in the case of a dyad in which the carotenoid contained 10 double bonds. This observation together with previous findings in the same system provides strong evidence for excitonic Car S 1-Pc Q y interactions. Very similar results were observed with photosynthetic LHC II complexes in the past, supporting an important role of such interactions in photosynthetic down-regulation.« less

Development and biodistribution of a theranostic aluminum phthalocyanine nanophotosensitizer.

PubMed

Asem, Heba; El-Fattah, Ahmed Abd; Nafee, Noha; Zhao, Ying; Khalil, Labiba; Muhammed, Mamoun; Hassan, Moustapha; Kandil, Sherif

2016-03-01

Aluminum phthalocyanine (AlPc) is an efficient second generation photosensitizer (PS) with high fluorescence ability. Its use in photodynamic therapy (PDT) is hampered by hydrophobicity and poor biodistribution. AlPc was converted to a biocompatible nanostructure by incorporation into amphiphilic polyethylene glycol-polycaprolactone (PECL) copolymer nanoparticles, allowing efficient entrapment of the PS in the hydrophobic core, water dispersibility and biodistribution enhancement by PEG-induced surface characteristics. A series of synthesized PECL copolymers were used to prepare nanophotosensitizers with an average diameter of 66.5-99.1nm and encapsulation efficiency (EE%) of 66.4-78.0%. One formulation with favorable colloidal properties and relatively slow release over 7 days was selected for in vitro photophysical assessment and in vivo biodistribution studies in mice. The photophysical properties of AlPc were improved by encapsulating AlPc into PECL-NPs, which showed intense fluorescence emission at 687nm and no AlPc aggregation has been induced after entrapment into the nanoparticles. Biodistribution of AlPc loaded NPs (AlPc-NPs) and free AlPc drug in mice was monitored by in vivo whole body fluorescence imaging and ex vivo organ imaging, with in vivo imaging system (IVIS). Compared to a AlPc solution in aqueous TWEEN 80 (2 w/v%), the developed nanophotosensitizer showed targeted drug delivery to lungs, liver and spleen as monitored by the intrinsic fluorescence of AlPc at different time points (1h, 24h and 48h) post iv. administration. The AlPc-based copolymer nanoparticles developed offer potential as a single agent-multifunctional theranostic nanophotosensitizer for PDT coupled with imaging-guided drug delivery and biodistribution, and possibly also fluorescence diagnostics. Copyright © 2015 Elsevier B.V. All rights reserved.

Enhancement of the photoprotection and nanomechanical properties of polycarbonate by deposition of thin ceramic coatings

NASA Astrophysics Data System (ADS)

Mailhot, B.; Rivaton, A.; Gardette, J.-L.; Moustaghfir, A.; Tomasella, E.; Jacquet, M.; Ma, X.-G.; Komvopoulos, K.

2006-05-01

The chemical reactions resulting from ultraviolet radiation produce discoloration and significant changes in the surface properties of polycarbonate (PC). To prevent photon absorption from irradiation and oxygen diffusion and to enhance the surface nanomechanical properties of PC, thin ceramic coatings of ZnO and Al2O3 (both single- and multi-layer) were deposited on bulk PC by radio-frequency magnetron sputtering. The samples were irradiated at wavelengths greater than 300 nm, representative of outdoor conditions. Despite the effectiveness of ZnO to protect PC from irradiation damage, photocatalytic oxidation at the PC/ZnO interface was the limiting factor. To overcome this deficiency, a thin Al2O3 coating was used both as intermediate and top layer because of its higher hardness and wear resistance than ZnO. Therefore, PC/Al2O3/ZnO, PC/ZnO/Al2O3, and PC/Al2O3/ZnO/Al2O3 layered media were fabricated and their photodegradation properties were examined by infrared and ultraviolet-visible spectroscopy. It was found that the photocatalytic activity at the PC/ZnO interface was reduced in the presence of the intermediate Al2O3 layer that limited the oxygen permeability. Nanomechanical experiments performed with a surface force apparatus revealed that the previous coating systems enhanced both the surface nanohardness and the elastic modulus and reduced the coefficient of friction in the order of ZnO, Al2O3, and Al2O3/ZnO/Al2O3. Although irradiation increased the nanohardness and the elastic modulus of PC, the irradiation effect on the surface mechanical properties of ceramic-coated PC was secondary.

COMPUTERIZED RISK AND BIOACCUMULATION SYSTEM (VERSION 1.0)

EPA Science Inventory

CRABS is a combination of a rule-based expert system and more traditional procedural programming techniques. ule-based expert systems attempt to emulate the decision making process of human experts within a clearly defined subject area. xpert systems consist of an "inference engi...

An Expert System for Environmental Data Management.

ERIC Educational Resources Information Center

Berka, Petr; Jirku, Petr

1995-01-01

Examines the possibility of using expert system tools for environmental data management. Describes the domain-independent expert system shell SAK and Knowledge EXplorer, a system that learns rules from data. Demonstrates the functionality of Knowledge EXplorer on an example of water quality evaluation. (LZ)

Data reduction expert assistant

NASA Technical Reports Server (NTRS)

Miller, Glenn E.; Johnston, Mark D.; Hanisch, Robert J.

1991-01-01

Viewgraphs on data reduction expert assistant are presented. Topics covered include: data analysis systems; philosophy of these systems; disadvantages; expert assistant; useful goals; and implementation considerations.

CLIPS: The C language integrated production system

NASA Technical Reports Server (NTRS)

Riley, Gary

1994-01-01

Expert systems are computer programs which emulate human expertise in well defined problem domains. The potential payoff from expert systems is high: valuable expertise can be captured and preserved, repetitive and/or mundane tasks requiring human expertise can be automated, and uniformity can be applied in decision making processes. The C Language Integrated Production System (CLIPS) is an expert system building tool, developed at the Johnson Space Center, which provides a complete environment for the development and delivery of rule and/or object based expert systems. CLIPS was specifically designed to provide a low cost option for developing and deploying expert system applications across a wide range of hardware platforms. The commercial potential of CLIPS is vast. Currently, CLIPS is being used by over 5,000 individuals throughout the public and private sector. Because the CLIPS source code is readily available, numerous groups have used CLIPS as the basis for their own expert system tools. To date, three commercially available tools have been derived from CLIPS. In general, the development of CLIPS has helped to improve the ability to deliver expert system technology throughout the public and private sectors for a wide range of applications and diverse computing environments.

Primary Care–Mental Health Integration Programs in the Veterans Affairs Health System Serve a Different Patient Population Than Specialty Mental Health Clinics

PubMed Central

Szymanski, Benjamin R.; Zivin, Kara; McCarthy, John F.; Valenstein, Marcia; Pfeiffer, Paul N.

2012-01-01

Objective: To assess whether Primary Care–Mental Health Integration (PC-MHI) programs within the Veterans Affairs (VA) health system provide services to patient subgroups that may be underrepresented in specialty mental health care, including older patients and women, and to explore whether PC-MHI served individuals with less severe mental health disorders compared to specialty mental health clinics. Method: Data were obtained from the VA National Patient Care Database for a random sample of VA patients, and primary care patients with an ICD-9-CM mental health diagnosis (N = 243,806) in 2009 were identified. Demographic and clinical characteristics between patients who received mental health treatment exclusively in a specialty mental health clinic (n = 128,248) or exclusively in a PC-MHI setting (n = 8,485) were then compared. Characteristics of patients who used both types of services were also explored. Results: Compared to patients treated in specialty mental health clinics, PC-MHI service users were more likely to be aged 65 years or older (26.4% vs 17.9%, P < .001) and female (8.6% vs 7.7%, P = .003). PC-MHI patients were more likely than specialty mental health clinic patients to be diagnosed with a depressive disorder other than major depression, an unspecified anxiety disorder, or an adjustment disorder (P < .001) and less likely to be diagnosed with more severe disorders, including bipolar disorder, posttraumatic stress disorder, psychotic disorders, and alcohol or substance dependence (P < .001). Conclusions: Primary Care–Mental Health Integration within the VA health system reaches demographic subgroups that are traditionally less likely to use specialty mental health care. By treating patients with less severe mental health disorders, PC-MHI appears to expand upon, rather than duplicate, specialty care services. PMID:23106026

The Paradox of Expertise.

ERIC Educational Resources Information Center

Hankins, George.

1987-01-01

Describes the novice-to-expert model of human learning and compares it to the recent advances in the areas of artificial intelligence and expert systems. Discusses some of the characteristics of experts, proposing connections between them with expert systems and theories of left-right brain functions. (TW)

Visible light detoxification by 2,9,16,23-tetracarboxyl phthalocyanine copper modified amorphous titania

NASA Astrophysics Data System (ADS)

Chen, Feng; Deng, Zhigang; Li, Xiaopei; Zhang, Jinlong; Zhao, Jincai

2005-10-01

Visible light detoxification of methyl orange (MO) was achieved with a photo-stable 2,9,16,23-tetracarboxyl phthalocyanine (TcPc)/amorphous TiO 2 hybrid photocatalyst. TcPc/amorphous TiO 2 exhibits an excellent photocatalytic activity under visible irradiation ( λ > 550 nm). Besides the active oxygen species, sensitizer radical cation, TcPc + rad , was also found to react with MO directly and induce the photodegradation of MO significantly for the first time in dye sensitized photocatalytic system.

Remote media vision-based computer input device

NASA Astrophysics Data System (ADS)

Arabnia, Hamid R.; Chen, Ching-Yi

1991-11-01

In this paper, we introduce a vision-based computer input device which has been built at the University of Georgia. The user of this system gives commands to the computer without touching any physical device. The system receives input through a CCD camera; it is PC- based and is built on top of the DOS operating system. The major components of the input device are: a monitor, an image capturing board, a CCD camera, and some software (developed by use). These are interfaced with a standard PC running under the DOS operating system.

Computing Operating Characteristics Of Bearing/Shaft Systems

NASA Technical Reports Server (NTRS)

Moore, James D.

1996-01-01

SHABERTH computer program predicts operating characteristics of bearings in multibearing load-support system. Lubricated and nonlubricated bearings modeled. Calculates loads, torques, temperatures, and fatigue lives of ball and/or roller bearings on single shaft. Provides for analysis of reaction of system to termination of supply of lubricant to bearings and other lubricated mechanical elements. Valuable in design and analysis of shaft/bearing systems. Two versions of SHABERTH available. Cray version (LEW-14860), "Computing Thermal Performances Of Shafts and Bearings". IBM PC version (MFS-28818), written for IBM PC-series and compatible computers running MS-DOS.

Expert systems in clinical microbiology.

PubMed

Winstanley, Trevor; Courvalin, Patrice

2011-07-01

This review aims to discuss expert systems in general and how they may be used in medicine as a whole and clinical microbiology in particular (with the aid of interpretive reading). It considers rule-based systems, pattern-based systems, and data mining and introduces neural nets. A variety of noncommercial systems is described, and the central role played by the EUCAST is stressed. The need for expert rules in the environment of reset EUCAST breakpoints is also questioned. Commercial automated systems with on-board expert systems are considered, with emphasis being placed on the "big three": Vitek 2, BD Phoenix, and MicroScan. By necessity and in places, the review becomes a general review of automated system performances for the detection of specific resistance mechanisms rather than focusing solely on expert systems. Published performance evaluations of each system are drawn together and commented on critically.

Modular socket system versus traditionally laminated socket: a cost analysis.

PubMed

Normann, Elna; Olsson, Anna; Brodtkorb, Thor-Henrik

2011-03-01

Using the new modular socket system (MSS) to produce a prosthetic socket directly on the patient has the potential of being easier and quicker to manufacture but also incurring higher costs. The purpose of the study was to compare the costs of manufacturing a transtibial prosthetic socket using either a MSS or a standard laminated socket (PC). Concurrent controlled trial. A total of 20 patients at two orthopaedic facilities were followed with regards to the cost of manufacturing a prosthetic socket using either MSS or PC. Time aspects and material costs were considered in the cost analysis. Other factors studied include delivery time and number of visits. For the cost analysis, only direct costs pertaining to the prosthetic socket were considered. The total cost of MSS was found to be significantly higher (p < 0.01) compared to PC. However, the production and time cost was significantly lower. Delivery time to the patient was 1 day for MSS compared to 17 days for PC. Our study shows that the direct prosthetic cost of treating a patient using MSS is significantly higher than treating a patient using PC. However, the MSS prosthesis can be delivered significantly faster and with fewer visits. Further studies taking the full societal costs of MSS into account should therefore be performed. This study shows that the direct prosthetic cost of treating a patient with Modular Socket System is significantly higher than treating a patient with plastercasting with standard laminated socket. However, the Modular Socket System prosthesis can be delivered significantly faster and with fewer visits.

High-efficiency THz modulator based on phthalocyanine-compound organic films

DOE Office of Scientific and Technical Information (OSTI.GOV)

He, Ting; Zhang, Bo, E-mail: bzhang@cnu.edu.cn, E-mail: sjl-phy@cnu.edu.cn; Shen, Jingling, E-mail: bzhang@cnu.edu.cn, E-mail: sjl-phy@cnu.edu.cn

2015-02-02

We report a high efficiency, broadband terahertz (THz) modulator following a study of phthalocyanine-compound organic films irradiated with an external excitation laser. Both transmission and reflection modulations of each organic/silicon bilayers were measured using THz time-domain and continuous-wave systems. For very low intensities, the experimental results show that AlClPc/Si can achieve a high modulation factor for transmission and reflection, indicating that AlClPc/Si has a superior modulation efficiency compared with the other films (CuPc and SnCl{sub 2}Pc). In contrast, the strong attenuation of the transmitted and reflected THz waves revealed that a nonlinear absorption process takes place at the organic/silicon interface.

Development of a Low-Latency, High Data Rate, Differential GPS Relative Positioning System for UAV Formation Flight Control

DTIC Science & Technology

2006-09-01

spiral development cycle involved transporting the software processes from a Windows XP / MATLAB environment to a Linux / C++ environment. This...tested on. Additionally, in the case of the GUMSTIX PC boards, the LINUX operating system is burned into the read-only memory. Lastly, both PC-104 and...both the real-time environment and the post-processed en - vironment. When the system operates in real-time mode, an output file is generated which

Developing and using expert systems and neural networks in medicine: a review on benefits and challenges.

PubMed

Sheikhtaheri, Abbas; Sadoughi, Farahnaz; Hashemi Dehaghi, Zahra

2014-09-01

Complicacy of clinical decisions justifies utilization of information systems such as artificial intelligence (e.g. expert systems and neural networks) to achieve better decisions, however, application of these systems in the medical domain faces some challenges. We aimed at to review the applications of these systems in the medical domain and discuss about such challenges. Following a brief introduction of expert systems and neural networks by representing few examples, the challenges of these systems in the medical domain are discussed. We found that the applications of expert systems and artificial neural networks have been increased in the medical domain. These systems have shown many advantages such as utilization of experts' knowledge, gaining rare knowledge, more time for assessment of the decision, more consistent decisions, and shorter decision-making process. In spite of all these advantages, there are challenges ahead of developing and using such systems including maintenance, required experts, inputting patients' data into the system, problems for knowledge acquisition, problems in modeling medical knowledge, evaluation and validation of system performance, wrong recommendations and responsibility, limited domains of such systems and necessity of integrating such systems into the routine work flows. We concluded that expert systems and neural networks can be successfully used in medicine; however, there are many concerns and questions to be answered through future studies and discussions.

a Study on Satellite Diagnostic Expert Systems Using Case-Based Approach

NASA Astrophysics Data System (ADS)

Park, Young-Tack; Kim, Jae-Hoon; Park, Hyun-Soo

1997-06-01

Many research works are on going to monitor and diagnose diverse malfunctions of satellite systems as the complexity and number of satellites increase. Currently, many works on monitoring and diagnosis are carried out by human experts but there are needs to automate much of the routine works of them. Hence, it is necessary to study on using expert systems which can assist human experts routine work by doing automatically, thereby allow human experts devote their expertise more critical and important areas of monitoring and diagnosis. In this paper, we are employing artificial intelligence techniques to model human experts' knowledge and inference the constructed knowledge. Especially, case-based approaches are used to construct a knowledge base to model human expert capabilities which use previous typical exemplars. We have designed and implemented a prototype case-based system for diagnosing satellite malfunctions using cases. Our system remembers typical failure cases and diagnoses a current malfunction by indexing the case base. Diverse methods are used to build a more user friendly interface which allows human experts can build a knowledge base in as easy way.

The First Expert CAI System

PubMed Central

Feurzeig, Wallace

1984-01-01

The first expert instructional system, the Socratic System, was developed in 1964. One of the earliest applications of this system was in the area of differential diagnosis in clinical medicine. The power of the underlying instructional paradigm was demonstrated and the potential of the approach for valuably supplementing medical instruction was recognized. Twenty years later, despite further educationally significant advances in expert systems technology and enormous reductions in the cost of computers, expert instructional methods have found very little application in medical schools.

Projects in an expert system class

NASA Technical Reports Server (NTRS)

Whitson, George M.

1991-01-01

Many universities now teach courses in expert systems. In these courses students study the architecture of an expert system, knowledge acquisition techniques, methods of implementing systems and verification and validation techniques. A major component of any such course is a class project consisting of the design and implementation of an expert system. Discussed here are a number of techniques that we have used at the University of Texas at Tyler to develop meaningful projects that could be completed in a semester course.

Control of lithium metal anode cycleability by electrolyte temperature

NASA Astrophysics Data System (ADS)

Ishikawa, Masashi; Kanemoto, Manabu; Morita, Masayuki

Precycling of lithium (Li) metal on a nickel substrate at low temperatures (0 and -20°C) in propylene carbonate (PC) mixed with dimethyl carbonate (DMC) and Li hexafluorophosphate (LiPF 6) (LiPF 6-PC/DMC) was found to enhance Li cycleability in the subsequent cycles at a room temperature (25°C). In contrast when the precycling at the low temperatures was performed in PC mixed with 2-methyltetrahydrofuran (2MeTHF) and LiPF 6 (LiPF 6-PC/2MeTHF), no improvement in the Li cycling efficiency was observed in the subsequent cycles at 25°C. These results suggest that the low-temperature precycling effect on the Li cycleability depends on a co-solvent used in the PC-based electrolytes. Ac impedance analysis revealed that the precycling in the low-temperature LiPF 6-PC/DMC electrolyte provided a compact Li interface with a low resistance. In marked constant to this, a Li anode interface formed by the precycling in the LiPF 6-PC/2MeTHF system was irregular and resistive to Li-ion diffusion. The origins of the low-temperature precycling effect dependent on the co-solvents were discussed.

Distinguishing Polymorphs of the Semiconducting Pigment Copper Phthalocyanine by Solid-state NMR and Raman Spectroscopy

PubMed Central

Shaibat, Medhat A.; Casabianca, Leah B.; Siberio-Pérez, Diana Y.; Matzger, Adam J; Ishii, Yoshitaka

2010-01-01

Cu(II)(phthalocyanine) (CuPc) is broadly utilized as an archetypal molecular semiconductor and is the most widely used blue printing pigment. CuPc crystallizes in six different forms; the chemical and physical properties are substantially modulated by its molecular packing among these polymorphs. Despite the growing importance of this system, spectroscopic identification of different polymorphs for CuPc has posed difficulties. This study presents the first example of spectroscopic distinction of α- and β-forms of CuPc, the most widely used polymorphs, by solid-state NMR (SSNMR) and Raman spectroscopy. 13C high-resolution SSNMR spectra of α- and β-CuPc using very-fast magic angle spinning (VFMAS) at 20 kHz show that hyperfine shifts sensitively reflect polymorphs of CuPc. The experimental results were confirmed by ab initio chemical shift calculations. 13C and 1H SSNMR relaxation times of α- and β-CuPc under VFMAS also showed marked differences, presumably because of the difference in electronic spin correlation times in the two forms. Raman spectroscopy also provided another reliable method of differentiation between the two polymorphs. PMID:20225842

Program maintenance manual for nickel cadmium battery expert system, version 1

NASA Technical Reports Server (NTRS)

1986-01-01

The Nickel-Cadmium Battery Expert System (NICBES) is an expert system for fault diagnosis and advice of the nickel-cadmium batteries found in the Hubble Space Telescope (HST). The system application and security, equipment environment, and the program maintenance procedures are examined.

A Logic Basis for Information Retrieval.

ERIC Educational Resources Information Center

Watters, C. R.; Shepherd, M. A.

1987-01-01

Discusses the potential of recent work in artificial intelligence, especially expert systems, for the development of more effective information retrieval systems. Highlights include the role of an expert bibliographic retrieval system and a prototype expert retrieval system, PROBIB-2, that uses MicroProlog to provide deductive reasoning…

An expert system for the quantification of fault rates in construction fall accidents.

PubMed

Talat Birgonul, M; Dikmen, Irem; Budayan, Cenk; Demirel, Tuncay

2016-01-01

Expert witness reports, prepared with the aim of quantifying fault rates among parties, play an important role in a court's final decision. However, conflicting fault rates assigned by different expert witness boards lead to iterative objections raised by the related parties. This unfavorable situation mainly originates due to the subjectivity of expert judgments and unavailability of objective information about the causes of accidents. As a solution to this shortcoming, an expert system based on a rule-based system was developed for the quantification of fault rates in construction fall accidents. The aim of developing DsSafe is decreasing the subjectivity inherent in expert witness reports. Eighty-four inspection reports prepared by the official and authorized inspectors were examined and root causes of construction fall accidents in Turkey were identified. Using this information, an evaluation form was designed and submitted to the experts. Experts were asked to evaluate the importance level of the factors that govern fall accidents and determine the fault rates under different scenarios. Based on expert judgments, a rule-based expert system was developed. The accuracy and reliability of DsSafe were tested with real data as obtained from finalized court cases. DsSafe gives satisfactory results.

Ground terminal expert (GTEX). Part 2: Expert system diagnostics for a 30/20 Gigahertz satellite transponder

NASA Technical Reports Server (NTRS)

Durkin, John; Schlegelmilch, Richard; Tallo, Donald

1992-01-01

A research effort was undertaken to investigate how expert system technology could be applied to a satellite communications system. The focus of the expert system is the satellite earth station. A proof of concept expert system called the Ground Terminal Expert (GTEX) was developed at the University of Akron in collaboration with the NASA Lewis Research Center. With the increasing demand for satellite earth stations, maintenance is becoming a vital issue. Vendors of such systems will be looking for cost effective means of maintaining such systems. The objective of GTEX is to aid in diagnosis of faults occurring with the digital earth station. GTEX was developed on a personal computer using the Automated Reasoning Tool for Information Management (ART-IM) developed by the Inference Corporation. Developed for the Phase 2 digital earth station, GTEX is a part of the Systems Integration Test and Evaluation (SITE) facility located at the NASA Lewis Research Center.

System and method for creating expert systems

NASA Technical Reports Server (NTRS)

Hughes, Peter M. (Inventor); Luczak, Edward C. (Inventor)

1998-01-01

A system and method provides for the creation of a highly graphical expert system without the need for programming in code. An expert system is created by initially building a data interface, defining appropriate Mission, User-Defined, Inferred, and externally-generated GenSAA (EGG) data variables whose data values will be updated and input into the expert system. Next, rules of the expert system are created by building appropriate conditions of the rules which must be satisfied and then by building appropriate actions of rules which are to be executed upon corresponding conditions being satisfied. Finally, an appropriate user interface is built which can be highly graphical in nature and which can include appropriate message display and/or modification of display characteristics of a graphical display object, to visually alert a user of the expert system of varying data values, upon conditions of a created rule being satisfied. The data interface building, rule building, and user interface building are done in an efficient manner and can be created without the need for programming in code.

Threat expert system technology advisor

NASA Technical Reports Server (NTRS)

Kurrasch, E. R.; Tripp, L. R.

1987-01-01

A prototype expert system was developed to determine the feasibility of using expert system technology to enhance the performance and survivability of helicopter pilots in a combat threat environment while flying NOE (Nap of the Earth) missions. The basis for the concept is the potential of using an Expert System Advisor to reduce the extreme overloading of the pilot who flies NOE mission below treetop level at approximately 40 knots while performing several other functions. The ultimate goal is to develop a Threat Expert System Advisor which provides threat information and advice that are better than even a highly experienced copilot. The results clearly show that the NOE pilot needs all the help in decision aiding and threat situation awareness that he can get. It clearly shows that heuristics are important and that an expert system for combat NOE helicopter missions can be of great help to the pilot in complex threat situations and in making decisions.

Reducing background noise in near-infrared medical imaging: Routes to activated fluorescing

NASA Astrophysics Data System (ADS)

Burdette, Mary K.; Bandera, Yuriy; Powell, Rhonda R.; Bruce, Terri F.; Foulger, Stephen H.

2016-03-01

Activated fluorescence was achieved for nanoparticle based systems. One particulate system consisting of a poly(propargyl acrylate) (PA) core with covalently attached derivatized fluorescein and modified bovine serum albumin covalently conjugated to a cyanine 3 derivative was initially nonfluorescent. Upon trypsin addition and subsequent proteolytic digestion, Förster resonance energy transfer (FRET) was induced. The other particulate system consisted of a PA core with covalently attached azide modified BSA, which was covalently attached to a silicon phthalocyanine derivative (PA/BSA/akSiPc600). Both systems were biocompatible. To investigate activated fluorescence with the PA/BSA/akSiPc600 system in cancer cells, human non-small cell lung cancer cells (A549 cell line) were used as a model system. The PA/BSA/akSiPc600 system was incubated with the cells at varying time points in an effort to see a fluorescence increase over time as the cells uptake the particles and as they digest the BSA, most probably, via endocytosis. It was seen, through live cell scanning confocal microscopy, that the fluorescence was activated in the cell.

Resolving the Iron Phthalocyanine Redox Transitions for ORR Catalysis in Aqueous Media

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alsudairi, Amell; Li, Jingkun; Ramaswamy, Nagappan

Metal macrocycles are among the most important catalytic systems in electrocatalysis and biocatalysis owing to their rich redox chemistry. Precise understanding of the redox behavior of metal macrocycles in operando is essential for fundamental studies and practical applications of this catalytic system. Here we present electrochemical data for the representative iron phthalocyanine (FePc) in both aqueous and nonaqueous media coupled with in situ Raman and X-ray absorption analyses to challenge the traditional notion of the redox transition of FePc at the low potential end in aqueous media by showing that it arises from the redox transition of the ring. Ourmore » data unequivocally demonstrate that the electron is shuttled to the Pc ring via the Fe(II)/Fe(I) redox center. The Fe(II)/Fe(I) redox transition of FePc in aqueous media is indiscernible by normal spectroscopic methods owing to the lack of a suitable axial ligand to stabilize the Fe(I) state.« less

VREPAR projects: the use of virtual environments in psycho-neuro-physiological assessment and rehabilitation.

PubMed

Riva, G; Bacchetta, M; Baruffi, M; Borgomainerio, E; Defrance, C; Gatti, F; Galimberti, C; Fontaneto, S; Marchi, S; Molinari, E; Nugues, P; Rinaldi, S; Rovetta, A; Ferretti, G S; Tonci, A; Wann, J; Vincelli, F

1999-01-01

Due, in large part, to the significant advances in PC hardware that have been made over the last 3 years, PC-based virtual environments are approaching reality. Virtual Reality Environments for Psychoneurophysiological Assessment and Rehabilitation (VREPAR) are two European Community funded projects (Telematics for health-HC 1053/HC 1055, http:// www.psicologia.net) that are trying to develop a PC-based virtual reality system (PC-VRS) for the medical market that can be marketed at a price that is accessible to its possible endusers (hospitals, universities, and research centres) and that would have the modular, connectability, and interoperability characteristics that the existing systems lack. In particular, the projects are developing three hardware/software modules for the application of the PCVRS in psycho-neuro-physiological assessment and rehabilitation. The chosen development areas are eating disorders (bulimia, anorexia, and obesity), movement disorders (Parkinson's disease and torsion dystonia) and stroke disorders (unilateral neglect and hemiparesis). This article describes the rationale of the modules and the preliminary results obtained.

Gaps in Capacity in Primary Care in Low-Resource Settings for Implementation of Essential Noncommunicable Disease Interventions

PubMed Central

Mendis, S.; Al Bashir, Igbal; Dissanayake, Lanka; Varghese, Cherian; Fadhil, Ibtihal; Marhe, Esha; Sambo, Boureima; Mehta, Firdosi; Elsayad, Hind; Sow, Idrisa; Algoe, Maltie; Tennakoon, Herbert; Truong, Lai Die; Lan, Le Thi Tuyet; Huiuinato, Dismond; Hewageegana, Neelamni; Fahal, Naiema A. W.; Mebrhatu, Goitom; Tshering, Gado; Chestnov, Oleg

2012-01-01

Objective. The objective was to evaluate the capacity of primary care (PC) facilities to implement basic interventions for prevention and management of major noncommunicable diseases (NCDs), including cardiovascular diseases and diabetes. Methods. A cross-sectional survey was done in eight low- and middle-income countries (Benin, Bhutan, Eritrea, Sri Lanka, Sudan, Suriname, Syria, and Vietnam) in 90 PC facilities randomly selected. The survey included questions on the availability of human resources, equipment, infrastructure, medicines, utilization of services, financing, medical information, and referral systems. Results and Conclusions. Major deficits were identified in health financing, access to basic technologies and medicines, medical information systems, and the health workforce. The study has provided the foundation for strengthening PC to address noncommunicable diseases. There are important implications of the findings of this study for all low- and middle-income countries as capacity of PC is fundamental for equitable prevention and control of NCDs. PMID:23251789

Cell membrane-inspired polymeric micelles as carriers for drug delivery.

PubMed

Liu, Gongyan; Luo, Quanqing; Gao, Haiqi; Chen, Yuan; Wei, Xing; Dai, Hong; Zhang, Zongcai; Ji, Jian

2015-03-01

In cancer therapy, surface engineering of drug delivery systems plays an essential role in their colloidal stability, biocompatibility and prolonged blood circulation. Inspired by the cell membrane consisting of phospholipids and glycolipids, a zwitterionic phosphorylcholine functionalized chitosan oligosaccharide (PC-CSO) was first synthesized to mimic the hydrophilic head groups of those amphipathic lipids. Then hydrophobic stearic acid (SA) similar to lipid fatty acids was grafted onto PC-CSO to form amphiphilic PC-CSO-SA copolymers. Cell membrane-mimetic micelles with a zwitterionic surface and a hydrophobic SA core were prepared by the self-assembly of PC-CSO-SA copolymers, showing excellent stability under extreme conditions including protein containing media, high salt content or a wide pH range. Doxorubicin (DOX) was successfully entrapped into polymeric micelles through the hydrophobic interaction between DOX and SA segments. After fast internalization by cancer cells, sustained drug release from micelles to the cytoplasm and nucleus was achieved. This result suggests that these biomimetic polymeric micelles may be promising drug delivery systems in cancer therapy.

Predictive Models for Dynamic Brittle Fracture and Damage at High-velocity Impact in Multilayered Targets

DTIC Science & Technology

2016-11-01

layered glass/PC systems,Functionally Graded Materials (FGMs), polycrystalline AlON, and fiber-reinforced composite (FRC) materials. For the first time we...multi-layered glass/PC systems,Functionally Graded Materials (FGMs), polycrystalline AlON, and fiber-reinforced composite (FRC) materials. For the... Composite Lamina with Peridynamics, International Journal for Multiscale Computational Engineering, (12 2011): 0. doi: Florin Bobaru, Youn Doh Ha

Computing Equilibrium Chemical Compositions

NASA Technical Reports Server (NTRS)

Mcbride, Bonnie J.; Gordon, Sanford

1995-01-01

Chemical Equilibrium With Transport Properties, 1993 (CET93) computer program provides data on chemical-equilibrium compositions. Aids calculation of thermodynamic properties of chemical systems. Information essential in design and analysis of such equipment as compressors, turbines, nozzles, engines, shock tubes, heat exchangers, and chemical-processing equipment. CET93/PC is version of CET93 specifically designed to run within 640K memory limit of MS-DOS operating system. CET93/PC written in FORTRAN.

Transparently Interposing User Code at the System Interface

DTIC Science & Technology

1992-09-01

trademarks of Symantec Corporation. AFS is a trademark of Transarc Corporation. PC-cillin is a trademark of Trend Micro Devices, Incorporated. Scribe is a...communication. Finally, both the Norton AntiVirus [Symantec 91b] and PC-cillin [ Trend 90] anti-virus applications intercept destructive file operations made... Trend Micro Devices, Incorporated, 1990. [Tygar & Yee 91] J. D. Tygar, Bennet Yee. Dyad: A System for Using Physically Secure Coprocessors

A TinyOS-enabled MICA2-based wireless neural interface.

PubMed

Farshchi, Shahin; Nuyujukian, Paul H; Pesterev, Aleksey; Mody, Istvan; Judy, Jack W

2006-07-01

Existing approaches used to develop compact low-power multichannel wireless neural recording systems range from creating custom-integrated circuits to assembling commercial-off-the-shelf (COTS) PC-based components. Custom-integrated-circuit designs yield extremely compact and low-power devices at the expense of high development and upgrade costs and turn-around times, while assembling COTS-PC-technology yields high performance at the expense of large system size and increased power consumption. To achieve a balance between implementing an ultra-compact custom-fabricated neural transceiver and assembling COTS-PC-technology, an overlay of a neural interface upon the TinyOS-based MICA2 platform is described. The system amplifies, digitally encodes, and transmits neural signals real-time at a rate of 9.6 kbps, while consuming less than 66 mW of power. The neural signals are received and forwarded to a client PC over a serial connection. This data rate can be divided for recording on up to 6 channels, with a resolution of 8 bits/sample. This work demonstrates the strengths and limitations of the TinyOS-based sensor technology as a foundation for chronic remote biological monitoring applications and, thus, provides an opportunity to create a system that can leverage from the frequent networking and communications advancements being made by the global TinyOS-development community.

Movements of older adults during exergaming interventions that are associated with the Systems Framework for Postural Control: A systematic review.

PubMed

Tahmosybayat, Robin; Baker, Katherine; Godfrey, Alan; Caplan, Nick; Barry, Gill

2018-05-01

One in three older adults fall annually, in part due to impairments in the physiological systems that make up the postural control (PC) system. Exercise, particularly balance training, helps to prevent deterioration and even to improve outcomes in the PC system. Exergaming (exercise-gaming) is interactive computer gaming whereby an individual moves the body in response to onscreen cues in a playful format. Exergaming is an alternative method to standard practice for improving PC outcomes, which has been shown to reduce the risk of falling. Exergaming has received research attention, yet the intervention is still in its infancy. There could be benefit in exploring the movements trained with respect to a framework known for identifying underlying deficits in the PC system, the Systems Framework for Postural Control (SFPC). This may help target areas for improvement in balance training using exergames and shed light on the impact for fall prevention. A literature search was therefore conducted across six databases (CINAHL, EMBASE, PubMed, ISI, SPORTdiscus and Science Direct) using a range of search terms and combinations relating to exergaming, balance, exercise, falls and elderly. Quality assessment was conducted using the PEDro Scale and a custom-made quality assessment tool. Movements were rated by two reviewers based on the 9 operational definitions of the SFPC. Eighteen publications were included in the analysis, with a mean PEDro score of 5.6 (1.5). Overall, 4.99 (1.27) of the 9 operational definitions of the SFPC are trained in exergaming interventions. Exergaming does encourage individuals to stand up (3), lean while standing (4), move upper limbs and turn heads (6) and dual-task while standing (9), to some extent move the body forwards, backwards and sideways (1), and coordinate movements (2) but hardly at all to kick, hop, jump or walk (7), or to force a postural reaction from a physical force to the individual (5) and it does not mimic actual changes in sensory context (8). This is the first review, to our knowledge, that synthesises the literature on movements trained in exergaming interventions with respect to an established theoretical framework for PC. This review could provide useful information for designing exergames with PC outcomes in mind, which could help target specific exergames for multi-factorial training to overcome balance deficits. Some elements of PC are too unsafe to be trained using exergames, such as restricting sensory inputs or applying physical perturbations to an individual to elicit postural responses. Copyright © 2018 Elsevier B.V. All rights reserved.

[The application and development of artificial intelligence in medical diagnosis systems].

PubMed

Chen, Zhencheng; Jiang, Yong; Xu, Mingyu; Wang, Hongyan; Jiang, Dazong

2002-09-01

This paper has reviewed the development of artificial intelligence in medical practice and medical diagnostic expert systems, and has summarized the application of artificial neural network. It explains that a source of difficulty in medical diagnostic system is the co-existence of multiple diseases--the potentially inter-related diseases. However, the difficulty of image expert systems is inherent in high-level vision. And it increases the complexity of expert system in medical image. At last, the prospect for the development of artificial intelligence in medical image expert systems is made.

Development of an expert system for assessing trumpeter swan breeding habitat in the Northern Rocky Mountains.

USGS Publications Warehouse

Sojda, Richard S.; Cornely, John E.; Howe, Adele E.

2002-01-01

A decision support system for the management of the Rocky Mountain Population of Trumpeter Swans (Cygnus buccinators) is being developed. As part of this, three expert systems are also in development: one for assessing the quality of Trumpeter Swan breeding habitat; one for making water level recommendations in montane, palustrine wetlands; and one for assessing the contribution a particular site can make towards meeting objectives from as flyway perspective. The focus of this paper is the development of the breeding habitat expert system, which currently consists of 157 rules. Out purpose is to provide decision support for issues that appear to be beyond the capability of a single persons to conceptualize and solve. We propose that by involving multiple experts in the development and use of the systems, management will be significantly improved. The knowledge base for the expert system has been developed using standard knowledge engineering techniques with a small team of ecological experts. Knowledge was then coded using production rules organized in decision trees using a commercial expert system development shell. The final system has been deployed on the world wide web.

Effects of different fatty acids composition of phosphatidylcholine on brain function of dementia mice induced by scopolamine.

PubMed

Zhou, Miao-Miao; Xue, Yong; Sun, Shu-Hong; Wen, Min; Li, Zhao-Jie; Xu, Jie; Wang, Jing-Feng; Yanagita, Teruyoshi; Wang, Yu-Ming; Xue, Chang-Hu

2016-08-24

Phosphatidylcholine (PC), the major source of dietary choline, has been demonstrated to improve the capability of learning and memory in rodent and the amelioration of long-chain n-3 polyunsaturated fatty acids (PUFA) on anti-aging and anti-oxidation is widely known as well. In this study, three kinds of PC were chose to demonstrate the role of different fatty acids composition on glycerol backbone in improving the brain function of mice induced by scopolamine which was used to impair cholinergic system and cause oxidative stress. Male BALB/c mice were randomly divided into 5 groups: model (M) group, control (Con) group, egg yolk lecithin (EL) group, squid PC (SQ-PC) group and sea cucumber PC (SC-PC) group. The intraperitoneal injection of scopolamine hydrobromide (5 mg/kg) was carried out on the 8(th) of group feeding and sustained daily until the end of test. Morris water maze test was used to evaluate the improvement of cognitive decline and the activity of acetylcholinesterase (AchE), superoxide dismutase (SOD) and monoamine oxidase (MAO) and malondialdehyde (MDA) content in brain were measured to assess the physiological changes. In behavior test, the latency of PC groups was significantly reduced, while number of crossing the platform and time in target quadrant were increased in comparison with M group and the improvements of SQ-PC and SC-PC were better than that of EL (P < 0.05). Similar trend was observed in physiological changes. The AchE activity was effectively decreased and the SOD activity increased in hippocampus, cortex and white matter when comparing PC groups with M group. SQ-PC, SC-PC and EL respectively showed 22.82, 28.80 and 11.81 % decrease in MDA level in brain compared with M group. The MAO activity in white matter of SQ-PC, SC-PC and EL group separately depressed 33.05, 33.64 and 19.73 % in comparison with M group. No significance between SQ-PC and SC-PC was found in these indicators except the SOD activity in hippocampus and white matter. SQ-PC group had a higher SOD activity in hippocampus (103.68U/mg · prot.) and lower in white matter (120.57 U/mg · prot.) than SC-PC group (95.53 U/mg · prot. in hippocampus, 134.49 U/mg · prot. in white matter). PC rich in n-3 PUFA acted more ameliorative effects than that barely contained on the indicators above. Different fatty acids composition of PC all could diminish the cognitive decline and biological damage and protect the brain. EPA and DHA partly enhaced to the advantageous effects.

An HPLC-ICP-MS technique for determination of cadmium-phytochelatins in genetically modified Arabidopsis thaliana.

PubMed

Sadi, Baki B M; Vonderheide, Anne P; Gong, Ji-Ming; Schroeder, Julian I; Shann, Jodi R; Caruso, Joseph A

2008-01-01

A reversed-phase high-performance liquid chromatographic technique was developed to separate cadmium-phytochelatin complexes (Cd-PC2, Cd-PC3, and Cd-PC4) of interest in the plant Arapidopsis thaliana. High-performance liquid chromatography (HPLC) was coupled to an inductively coupled plasma mass spectrometric (ICP-MS) system with some modification to the interface. This was done in order to sustain the plasma with optimum sensitivity for cadmium detection in the presence of the high methanol loads used in the gradient elution of the reversed-phase separation. The detection limits were found to be 91.8 ngl(-1), 77.2 ngl(-1) and 49.2 ngl(-1) for Cd-PC2, Cd-PC3, and Cd-PC4 respectively. The regression coefficients (r2) for Cd-PC2 to Cd-PC4 detection ranged from 0.998 to 0.999. The method was then used to investigate the occurrence and effect of cadmium-phytochelatin complexes in wild-type Arabidopsis and a phytochelatin-deficient mutant cad1-3 that had been genetically modified to ectopically express the wheat TaPCS1 phytochelatin synthase enzyme. The primary complex found in both wild-type and transgenic plants was Cd-PC2. In both lines, higher levels of Cd-PC2 were found in shoots than in roots, showing that phytochelatin synthases contribute to the accumulation of cadmium in shoots, in the Cd-PC2 form. Genetic modification did, however, impact the overall accumulation of Cd. Transgenic plants contained almost two times more cadmium in the form of Cd-PC2 in their roots than did the corresponding wild-type plants. Similarly, the shoot samples of the modified species also contained more (by 1.6 times) cadmium in the form of Cd-PC2 than the wild type. The enhanced role of PC2 in the transgenic Arabidopsis correlates with data showing long-distance transport of Cd in transgenic plants. Targeted transgenic expression of non-native phytochelatin synthases may contribute to improving the efficiency of plants for phytoremediation.

(2S)-2-(3-(1-Carboxy-5-(4-211At-Astatobenzamido)Pentyl)Ureido)-Pentanedioic Acid for PSMA-Targeted α-Particle Radiopharmaceutical Therapy

PubMed Central

Kiess, Ana P.; Minn, Il; Vaidyanathan, Ganesan; Hobbs, Robert F.; Josefsson, Anders; Shen, Colette; Brummet, Mary; Chen, Ying; Choi, Jaeyeon; Koumarianou, Eftychia; Baidoo, Kwamena; Brechbiel, Martin W.; Mease, Ronnie C.; Sgouros, George; Zalutsky, Michael R.

2016-01-01

Alpha-particle emitters have a high linear energy transfer and short range, offering the potential for treating micrometastases while sparing normal tissues. We developed a urea-based, 211At-labeled small molecule targeting prostate-specific membrane antigen (PSMA) for the treatment of micrometastases due to prostate cancer (PC). Methods: PSMA-targeted (2S)-2-(3-(1-carboxy-5-(4-211At-astatobenzamido)pentyl)ureido)-pentanedioic acid (211At-6) was synthesized. Cellular uptake and clonogenic survival were tested in PSMA-positive (PSMA+) PC3 PIP and PSMA-negative (PSMA−) PC3 flu human PC cells after 211At-6 treatment. The antitumor efficacy of 211At-6 was evaluated in mice bearing PSMA+ PC3 PIP and PSMA– PC3 flu flank xenografts at a 740-kBq dose and in mice bearing PSMA+, luciferase-expressing PC3-ML micrometastases. Biodistribution was determined in mice bearing PSMA+ PC3 PIP and PSMA– PC3 flu flank xenografts. Suborgan distribution was evaluated using α-camera images, and microscale dosimetry was modeled. Long-term toxicity was assessed in mice for 12 mo. Results: 211At-6 treatment resulted in PSMA-specific cellular uptake and decreased clonogenic survival in PSMA+ PC3 PIP cells and caused significant tumor growth delay in PSMA+ PC3 PIP flank tumors. Significantly improved survival was achieved in the newly developed PSMA+ micrometastatic PC model. Biodistribution showed uptake of 211At-6 in PSMA+ PC3 PIP tumors and in kidneys. Microscale kidney dosimetry based on α-camera images and a nephron model revealed hot spots in the proximal renal tubules. Long-term toxicity studies confirmed that the dose-limiting toxicity was late radiation nephropathy. Conclusion: PSMA-targeted 211At-6 α-particle radiotherapy yielded significantly improved survival in mice bearing PC micrometastases after systemic administration. 211At-6 also showed uptake in renal proximal tubules resulting in late nephrotoxicity, highlighting the importance of long-term toxicity studies and microscale dosimetry. PMID:27230930

Intelligent systems for human resources.

PubMed

Kline, K B

1988-11-01

An intelligent system contains knowledge about some domain; it has sophisticated decision-making processes and the ability to explain its actions. The most important aspect of an intelligent system is its ability to effectively interact with humans to teach or assist complex information processing. Two intelligent systems are Intelligent Tutoring Systems (ITs) and Expert Systems. The ITSs provide instruction to a student similar to a human tutor. The ITSs capture individual performance and tutor deficiencies. These systems consist of an expert module, which contains the knowledge or material to be taught; the student module, which contains a representation of the knowledge the student knows and does not know about the domain; and the instructional or teaching module, which selects specific knowledge to teach, the instructional strategy, and provides assistance to the student to tutor deficiencies. Expert systems contain an expert's knowledge about some domain and perform specialized tasks or aid a novice in the performance of certain tasks. The most important part of an expert system is the knowledge base. This knowledge base contains all the specialized and technical knowledge an expert possesses. For an expert system to interact effectively with humans, it must have the ability to explain its actions. Use of intelligent systems can have a profound effect on human resources. The ITSs can provide better training by tutoring on an individual basis, and the expert systems can make better use of human resources through job aiding and performing complex tasks. With increasing training requirements and "doing more with less," intelligent systems can have a positive effect on human resources.

Production of cattle lacking prion protein

PubMed Central

Richt, Jürgen A; Kasinathan, Poothappillai; Hamir, Amir N; Castilla, Joaquin; Sathiyaseelan, Thillai; Vargas, Francisco; Sathiyaseelan, Janaki; Wu, Hua; Matsushita, Hiroaki; Koster, Julie; Kato, Shinichiro; Ishida, Isao; Soto, Claudio; Robl, James M; Kuroiwa, Yoshimi

2010-01-01

Prion diseases are caused by propagation of misfolded forms of the normal cellular prion protein PrPC, such as PrPBSE in bovine spongiform encephalopathy (BSE) in cattle and PrPCJD in Creutzfeldt-Jakob disease (CJD) in humans1. Disruption of PrPC expression in mice, a species that does not naturally contract prion diseases, results in no apparent developmental abnormalities2–5. However, the impact of ablating PrPC function in natural host species of prion diseases is unknown. Here we report the generation and characterization of PrPC-deficient cattle produced by a sequential gene-targeting system6. At over 20 months of age, the cattle are clinically, physiologically, histopathologically, immunologically and reproductively normal. Brain tissue homogenates are resistant to prion propagation in vitro as assessed by protein misfolding cyclic amplification7. PrPC-deficient cattle may be a useful model for prion research and could provide industrial bovine products free of prion proteins. PMID:17195841

Role of the Cellular Prion Protein in Oligodendrocyte Precursor Cell Proliferation and Differentiation in the Developing and Adult Mouse CNS

PubMed Central

Bribián, Ana; Gavín, Rosalina; Reina, Manuel; García-Verdugo, José Manuel; Torres, Juan María; de Castro, Fernando; del Río, José Antonio

2012-01-01

There are numerous studies describing the signaling mechanisms that mediate oligodendrocyte precursor cell (OPC) proliferation and differentiation, although the contribution of the cellular prion protein (PrPc) to this process remains unclear. PrPc is a glycosyl-phosphatidylinositol (GPI)-anchored glycoprotein involved in diverse cellular processes during the development and maturation of the mammalian central nervous system (CNS). Here we describe how PrPc influences oligodendrocyte proliferation in the developing and adult CNS. OPCs that lack PrPc proliferate more vigorously at the expense of a delay in differentiation, which correlates with changes in the expression of oligodendrocyte lineage markers. In addition, numerous NG2-positive cells were observed in cortical regions of adult PrPc knockout mice, although no significant changes in myelination can be seen, probably due to the death of surplus cells. PMID:22529900

Artificial Intelligence and Expert Systems Research and Their Possible Impact on Information Science.

ERIC Educational Resources Information Center

Borko, Harold

1985-01-01

Defines artificial intelligence (AI) and expert systems; describes library applications utilizing AI to automate creation of document representations, request formulations, and design and modify search strategies for information retrieval systems; discusses expert system development for information services; and reviews impact of these…

Enhanced use of CLIPS at the Los Alamos National Laboratory

NASA Technical Reports Server (NTRS)

Duerre, K. H.; Parkinson, W. J.; Osowski, J. J.

1991-01-01

Early efforts for producing expert systems for engineering applications used a limited subset of C Language Integrated Production System (CLIPS) features. The implementation details of previous expert systems and of the current expert system, which is used for training operators in the control of the Isotope Separation System, are discussed.