Relating nutrient and herbicide fate with landscape features and characteristics of 15 subwatersheds in the Choptank River watershed

USGS Publications Warehouse

Hively, W. Dean; Hapeman, Cathleen J.; McConnell, Laura L.; Fisher, Thomas R.; Rice, Clifford P.; McCarty, Gregory W.; Sadeghi, Ali M.; Whitall, David R.; Downey, Peter M.; de Guzman, Gabriela T. Nino; Bialek-Kalinski, Krystyna; Lang, Megan W.; Gustafson, Anne B.; Sutton, Adrienne J.; Sefton, Kerry A.; Harman Fetcho, Jennifer A.

2011-01-01

Excess nutrients and agrochemicals from non-point sources contribute to water quality impairment in the Chesapeake Bay watershed and their loading rates are related to land use, agricultural practices, hydrology, and pollutant fate and transport processes. In this study, monthly baseflow stream samples from 15 agricultural subwatersheds of the Choptank River in Maryland USA (2005 to 2007) were characterized for nutrients, herbicides, and herbicide transformation products. High-resolution digital maps of land use and forested wetlands were derived from remote sensing imagery. Examination of landscape metrics and water quality data, partitioned according to hydrogeomorphic class, provided insight into the fate, delivery, and transport mechanisms associated with agricultural pollutants. Mean Nitrate-N concentrations (4.9 mg/L) were correlated positively with percent agriculture (R2 = 0.56) and negatively with percent forest (R2 = 0.60). Concentrations were greater (p = 0.0001) in the well-drained upland (WDU) hydrogeomorphic region than in poorly drained upland (PDU), reflecting increased denitrification and reduced agricultural land use intensity in the PDU landscape due to the prevalence of hydric soils. Atrazine and metolachlor concentrations (mean 0.29 μg/L and 0.19 μg/L) were also greater (p = 0.0001) in WDU subwatersheds than in PDU subwatersheds. Springtime herbicide concentrations exhibited a strong, positive correlation (R2 = 0.90) with percent forest in the WDU subwatersheds but not in the PDU subwatersheds. In addition, forested riparian stream buffers in the WDU were more prevalent than in the PDU where forested patches are typically not located near streams, suggesting an alternative delivery mechanism whereby volatilized herbicides are captured by the riparian forest canopy and subsequently washed off during rainfall. Orthophosphate, CIAT (6-chloro-N-(1-methylethyl)-1,3,5-triazine-2,4-diamine), CEAT (6-chloro-N-ethyl-1,3,5-triazine-2,4-diamine), and MESA (2-[(2-ethyl-6-methylphenyl) (2-methoxy-1-methylethyl)amino]-2-oxoethanesulfonic acid) were also analyzed. These findings will assist efforts in targeting implementation of conservation practices to the most environmentally-critical areas within watersheds to achieve water quality improvements in a cost-effective manner.

Selective molecular transport through the protein shell of a bacterial microcompartment organelle

DOE PAGES

Chowdhury, Chiranjit; Chun, Sunny; Pang, Allan; ...

2015-02-23

Bacterial microcompartments are widespread prokaryotic organelles that have important and diverse roles ranging from carbon fixation to enteric pathogenesis. Current models for microcompartment function propose that their outer protein shell is selectively permeable to small molecules, but whether a protein shell can mediate selective permeability and how this occurs are unresolved questions. In this paper, biochemical and physiological studies of structure-guided mutants are used to show that the hexameric PduA shell protein of the 1,2-propanediol utilization (Pdu) microcompartment forms a selectively permeable pore tailored for the influx of 1,2-propanediol (the substrate of the Pdu microcompartment) while restricting the efflux ofmore » propionaldehyde, a toxic intermediate of 1,2-propanediol catabolism. Crystal structures of various PduA mutants provide a foundation for interpreting the observed biochemical and phenotypic data in terms of molecular diffusion across the shell. Finally and overall, these studies provide a basis for understanding a class of selectively permeable channels formed by nonmembrane proteins.« less

Workers begin removing PDU from STS-101 Atlantis

NASA Technical Reports Server (NTRS)

2000-01-01

Technicians at Launch Pad 39A begin removing thermal blankets and panels from a site near the tail of Space Shuttle Atlantis in order to reach the power drive unit (PDU) inside. The PDU controls the rudder/speed brake on the orbiter. From left to right are Mark Noel, Bob Wright and Tod Biddle, with United Space Alliance. Shuttle managers decided to replace the faulty PDU, about the size of an office copy machine, at the launch pad. If successful, launch preparations will continue as planned, with liftoff targeted for April 24 at 4:15 p.m. on mission STS-101. The mission is the third assembly flight for the International Space Station, carrying logistics and supplies to the Space Station, plus the crew will be preparing the Station for the arrival of the Zvezda Service Module, expected to be launched by Russia in July 2000. The crew will conduct one space walk to perform maintenance on the Space Station.

Presence of noroviruses and other enteric viruses in sewage and surface waters in The Netherlands.

PubMed

Lodder, W J; de Roda Husman, A M

2005-03-01

Since virus concentrations in drinking waters are generally below the detection limit, the infectious risk from drinking water consumption requires assessment from the virus concentrations in source waters and removal efficiency of treatment processes. In this study, we estimated from reverse transcription-PCR on 10-fold serially diluted RNA that noroviruses, the most prevalent waterborne gastroenteritis agents, were present at 4 (0.2 to 38) to 4,900 (303 to 4.6 x 10(4)) PCR-detectable units (PDU) per liter of river water (ranges are given in parentheses). These virus concentrations are still high compared with 896 to 7,499 PDU/liter of treated sewage and 5,111 to 850,000 PDU/liter in raw sewage. Sequencing analyses designated human norovirus GGII.4 Lordsdale as the most prevalent strain in the sampling period 1998 to 1999 in both sewage and surface waters. Other GGII strains were also very abundant, indicating that the majority of the virus contamination was derived from urban sewage, although very divergent strains and one animal strain were also detected in the surface and sewage waters. Rotaviruses were also detected in two large rivers (the Maas and the Waal) at 57 to 5,386 PDU/liter. The high virus concentrations determined by PCR may in part be explained by the detection of virus RNA instead of infectious particles. Indeed, reoviruses and enteroviruses that can be cultured were present at much lower levels, of 0.3 to 1 and 2 to 10 PFU/liter, respectively. Assuming 1% of the noroviruses and rotaviruses to be infectious, a much higher disease burden than for other viruses can be expected, not only because of the higher levels but also because of these viruses' higher infectivity and attack rates.

Presence of Noroviruses and Other Enteric Viruses in Sewage and Surface Waters in The Netherlands

PubMed Central

Lodder, W. J.; de Roda Husman, A. M.

2005-01-01

Since virus concentrations in drinking waters are generally below the detection limit, the infectious risk from drinking water consumption requires assessment from the virus concentrations in source waters and removal efficiency of treatment processes. In this study, we estimated from reverse transcription-PCR on 10-fold serially diluted RNA that noroviruses, the most prevalent waterborne gastroenteritis agents, were present at 4 (0.2 to 38) to 4,900 (303 to 4.6 × 104) PCR-detectable units (PDU) per liter of river water (ranges are given in parentheses). These virus concentrations are still high compared with 896 to 7,499 PDU/liter of treated sewage and 5,111 to 850,000 PDU/liter in raw sewage. Sequencing analyses designated human norovirus GGII.4 Lordsdale as the most prevalent strain in the sampling period 1998 to 1999 in both sewage and surface waters. Other GGII strains were also very abundant, indicating that the majority of the virus contamination was derived from urban sewage, although very divergent strains and one animal strain were also detected in the surface and sewage waters. Rotaviruses were also detected in two large rivers (the Maas and the Waal) at 57 to 5,386 PDU/liter. The high virus concentrations determined by PCR may in part be explained by the detection of virus RNA instead of infectious particles. Indeed, reoviruses and enteroviruses that can be cultured were present at much lower levels, of 0.3 to 1 and 2 to 10 PFU/liter, respectively. Assuming 1% of the noroviruses and rotaviruses to be infectious, a much higher disease burden than for other viruses can be expected, not only because of the higher levels but also because of these viruses' higher infectivity and attack rates. PMID:15746348

Alanine Scanning Mutagenesis Identifies an Asparagine–Arginine–Lysine Triad Essential to Assembly of the Shell of the Pdu Microcompartment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sinha, Sharmistha; Cheng, Shouqiang; Sung, Yea Won

2014-06-01

Bacterial microcompartments (MCPs) are the simplest organelles known. They function to enhance metabolic pathways by confining several related enzymes inside an all-protein envelope called the shell. In this study, we investigated the factors that govern MCP assembly by performing scanning mutagenesis on the surface residues of PduA, a major shell protein of the MCP used for 1,2-propanediol degradation. Biochemical, genetic, and structural analysis of 20 mutants allowed us to determine that PduA K26, N29, and R79 are crucial residues that stabilize the shell of the 1,2-propanediol MCP. In addition, we identify two PduA mutants (K37A and K55A) that impair MCPmore » function most likely by altering the permeability of its protein shell. These are the first studies to examine the phenotypic effects of shell protein structural mutations in an MCP system. The findings reported here may be applicable to engineering protein containers with improved stability for biotechnology applications.« less

The Relationships between Attention-Deficit/Hyperactive Disorder (ADHD), Conduct Disorder (CD) and Problematic Drug Use (PDU)

ERIC Educational Resources Information Center

Roy, Alastair

2008-01-01

This paper presents a comprehensive review of the literature examining the relationships between attention-deficit/hyperactivity disorder (ADHD), conduct disorder (CD) and problematic drug use (PDU). The review considers the main debates around the structure and aetiology of ADHD and the main theoretical frameworks offered to explain the…

High-definition flow Doppler ultrasonographic technique to assess hepatic vasculature compared with color or power Doppler ultrasonography: preliminary experience.

PubMed

Kim, Se Hyung; Lee, Jeong Min; Kim, Young Jun; Lee, Jae Young; Han, Joon Koo; Choi, Byung Ihn

2008-10-01

The purpose of this study was to introduce a new high-definition flow (HDF) Doppler technique and to compare its performance with those of color Doppler ultrasonography (CDU) and power Doppler ultrasonography (PDU) for assessment of hepatic vasculature in native and transplanted livers. High-definition flow was invented as a high-resolution bidirectional PDU technique. We obtained CDU, PDU, and HDF images of the hepatic artery (HA), portal vein (PV), and hepatic vein from 60 patients. They were divided into 2 groups: a liver transplantation group (group 1, n = 10) and a native liver group (group 2, n = 50). Two radiologists independently reviewed the cine images and graded them using a 4-point scale in terms of the clarity of the vessel margin and degree of depiction of the HA, flow filling, and flash artifacts. The degree of differentiation between the HA and PV was also evaluated. Flow directionality was recorded, and interobserver agreement was finally analyzed. Moderate to almost perfect agreement was achieved between radiologists for all parameters of each ultrasonographic technique. High-definition flow was significantly superior to both CDU and PDU with respect to all analyzed items except the degree of flash artifacts (P < .05). With regard to flash artifacts, CDU was significantly better than either PDU or HDF. High-definition flow provided directional information, as did CDU. The HDF technique provides better resolution for depicting hepatic vessels as well as their margins with less blooming compared with conventional Doppler ultrasonography in both native and transplanted liver. It also provides solid directional flow information. One point of concern, however, is the frequency of flash artifacts compared with that on CDU.

Workers begin removing PDU from STS-101 Atlantis

NASA Technical Reports Server (NTRS)

2000-01-01

United Space Alliance technicians at Launch Pad 39A look at the site of the power drive unit (PDU) for the rudder/speed brake on Shuttle Atlantis. From left are Mark Noel, Tod Biddle and Bob Wright. Shuttle managers decided to replace the faulty PDU, about the size of an office copy machine, at the launch pad. If successful, launch preparations will continue as planned, with liftoff targeted for April 24 at 4:15 p.m. on mission STS-101. The mission is the third assembly flight for the International Space Station, carrying logistics and supplies to the Space Station, plus the crew will be preparing the Station for the arrival of the Zvezda Service Module, expected to be launched by Russia in July 2000. The crew will conduct one space walk to perform maintenance on the Space Station.

75 FR 56124 - Notice of Issuance of Final Determination Concerning APC InfraStruXure® Solutions and of Certain...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-15

.... It also features output metering, branch current/circuit monitoring and auto-detection by the Infra...). Small system: 1 40 kW N+1 Symmetra PX UPS 1 40 kW InfraStruXure PDU with pre-fabricated circuits 10 Net...Xure PDU with pre-fabricated circuits 50 NetShelter SX enclosures 50 Rack power distribution units 16...

Preoperative clinical and diagnostic characteristics of patients who require delayed IPP after primary Peyronies repair.

PubMed

Alphs, Hannah H; Navai, Neema; Köhler, Tobias S; McVary, Kevin T

2010-03-01

Penile vascular abnormalities occur in a high proportion of patients with Peyronie's disease (PD). Penile duplex ultrasonography (PDU) and dynamic infusion cavernosometry and cavernosography (DICC) are tools that can be used to help tailor individualized treatment for patients undergoing surgical intervention for their PD. However, precisely which parameters can be used to predict those patients with PD at risk for developing erectile dysfunction (ED) after intervention without inflatable penile prosthesis (IPP) has not been previously elucidated. To evaluate preoperative vascular parameters that predispose PD patients for developing ED after intervention without IPP. Twenty-six patients receiving surgical intervention for their PD at a single center were retrospectively identified. Of these, 11 (42.3%) opted for primary repair without placement of an IPP. Three (27.2%) of these 11 patients went on to develop ED postoperatively. We compared various demographic, PDU, and DICC parameters between patients who did and did not fail primary repair of their PD. Mean age and follow-up of patients who went on to develop ED after repair of PD without IPP were not significantly different (P < 0.05). Resistive index (RI) and end diastolic volume were significantly different between these two groups (P < 0.05), while peak systolic volume, flow to maintain, and pressure decay were not significantly different. An RI cutoff of <0.80 was found to identify all patients who would later develop ED and fail primary repair without IPP. Penile vascular assessment can aid in counseling patients about their risk of developing delayed ED after primary repair of PD. In our cohort of patients, PDU provided preoperative risk stratification for postoperative erectile dysfunction in men undergoing Peyronie's repair without IPP. We propose the prospective study of an RI cutoff to identify patients at risk of failing primary PD repair without IPP.

Direct liquefaction Proof-of-Concept facility. Final technical progress report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Comolli, A.G.; Lee, L.K.; Pradhan, V.R.

1995-08-01

This report presents the results of work which included extensive modifications to HRI`s existing 3 ton per day Process Development Unit (PDU) and completion of the first PDU run. The 58-day Run 1 demonstrated scale-up of the Catalytic Two-Stage Liquefaction (CTSL Process) on Illinois No. 6 coal to produce distillate liquid products at a rate of up to 5 barrels per to of moisture-ash-free coal. The Kerr McGee Rose-SR unit from Wilsonville was redesigned and installed next to the US Filter installation to allow a comparison of the two solids removal systems. Also included was a new enclosed reactor tower,more » upgraded computer controls and a data acquisition system, an alternate power supply, a newly refurbished reactor, an in-line hydrotreater, interstage sampling system, coal handling unit, a new ebullating pump, load cells and improved controls and remodeled preheaters. Distillate liquid yields of 5 barrels/ton of moisture ash free coal were achieved. Coal slurry recycle rates were reduced from the 2--2.5 to 1 ratio demonstrated at Wilsonville to as low as 0.9 to 1. Coal feed rates were increased during the test by 50% while maintaining process performance at a marginally higher reactor severity. Sulfur in the coal was reduced from 4 wt% to ca. 0.02 wt% sulfur in the clean distillate fuel product. More than 3,500 gallons of distillate fuels were collected for evaluation and upgrading studies. The ROSE-SR Process was operated for the first time with a pentane solvent in a steady-state model. The energy rejection of the ash concentrate was consistently below prior data, being as low as 12%, allowing improved liquid yields and recovery.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hoekman, S. Kent; Broch, Broch; Robbins, Curtis

The primary objective of this project was to utilize a flexible, energy-efficient facility, called the DRI Renewable Energy Experimental Facility (REEF) to support various renewable energy research and development (R&D) efforts, along with education and outreach activities. The REEF itself consists of two separate buildings: (1) a 1200-ft2 off-grid capable house and (2) a 600-ft2 workshop/garage to support larger-scale experimental work. Numerous enhancements were made to DRI's existing renewable power generation systems, and several additional components were incorporated to support operation of the REEF House. The power demands of this house are satisfied by integrating and controlling PV arrays, solarmore » thermal systems, wind turbines, an electrolyzer for renewable hydrogen production, a gaseous-fuel internal combustion engine/generator set, and other components. Cooling needs of the REEF House are satisfied by an absorption chiller, driven by solar thermal collectors. The REEF Workshop includes a unique, solar air collector system that is integrated into the roof structure. This system provides space heating inside the Workshop, as well as a hot water supply. The Workshop houses a custom-designed process development unit (PDU) that is used to convert woody biomass into a friable, hydrophobic char that has physical and chemical properties similar to low grade coal. Besides providing sufficient space for operation of this PDU, the REEF Workshop supplies hot water that is used in the biomass treatment process. The DRI-REEF serves as a working laboratory for evaluating and optimizing the performance of renewable energy components within an integrated, residential-like setting. The modular nature of the system allows for exploring alternative configurations and control strategies. This experimental test bed is also highly valuable as an education and outreach tool both in providing an infrastructure for student research projects, and in highlighting renewable energy features to the public.« less

Low cost solar aray project: Experimental process system development unit for producing semiconductor-grade silicon using the silane-to-silicon process

NASA Technical Reports Server (NTRS)

1981-01-01

This phase consists of the engineering design, fabrication, assembly, operation, economic analysis, and process support R&D for an Experimental Process System Development Unit (EPSDU). The mechanical bid package was issued and the bid responses are under evaluation. Similarly, the electrical bid package was issued, however, responses are not yet due. The majority of all equipment is on order or has been received at the EPSDU site. The pyrolysis/consolidation process design package was issued. Preparation of process and instrumentation diagram for the free-space reactor was started. In the area of melting/consolidation, Kayex successfully melted chunk silicon and have produced silicon shot. The free-space reactor powder was successfully transported pneumatically from a storage bin to the auger feeder twenty-five feet up and was melted. The fluid-bed PDU has successfully operated at silane feed concentrations up to 21%. The writing of the operating manual has started. Overall, the design phase is nearing completion.

Report on all ARRA Funded Technical Work

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

2013-10-05

The main focus of this American Recovery and Reinvestment Act of 2009 (ARRA) funded project was to design an energy efficient carbon capture and storage (CCS) process using the Recipients membrane system for H{sub 2} separation and CO{sub 2} capture. In the ARRA-funded project, the Recipient accelerated development and scale-up of ongoing hydrogen membrane technology research and development (R&D). Specifically, this project focused on accelerating the current R&D work scope of the base program-funded project, involving lab scale tests, detail design of a 250 lb/day H{sub 2} process development unit (PDU), and scale-up of membrane tube and coating manufacturing. Thismore » project scope included the site selection and a Front End Engineering Design (FEED) study of a nominally 4 to 10 ton-per-day (TPD) Pre-Commercial Module (PCM) hydrogen separation membrane system. Process models and techno-economic analysis were updated to include studies on integration of this technology into an Integrated Gasification Combined Cycle (IGCC) power generation system with CCS.« less

Residue Phe112 of the Human-Type Corrinoid Adenosyltransferase (PduO) Enzyme of Lactobacillus reuteri Is Critical to the Formation of the Four-Coordinate Co(II) Corrinoid Substrate and to the Activity of the Enzyme

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mera, Paola E.; St. Maurice, Martin; Rayment, Ivan

2009-06-08

ATP:Corrinoid adenosyltransferases (ACAs) catalyze the transfer of the adenosyl moiety from ATP to cob(I)alamin via a four-coordinate cob(II)alamin intermediate. At present, it is unknown how ACAs promote the formation of the four-coordinate corrinoid species needed for activity. The published high-resolution crystal structure of the ACA from Lactobacillus reuteri (LrPduO) in complex with ATP and cob(II)alamin shows that the environment around the alpha face of the corrin ring consists of bulky hydrophobic residues. To understand how these residues promote the generation of the four-coordinate cob(II)alamin, variants of the human-type ACA enzyme from L. reuteri (LrPduO) were kinetically and structurally characterized. Thesemore » studies revealed that residue Phe112 is critical in the displacement of 5,6-dimethylbenzimidazole (DMB) from its coordination bond with the Co ion of the ring, resulting in the formation of the four-coordinate species. An F112A substitution resulted in a 80% drop in the catalytic efficiency of the enzyme. The explanation for this loss of activity was obtained from the crystal structure of the mutant protein, which showed cob(II)alamin bound in the active site with DMB coordinated to the cobalt ion. The crystal structure of an LrPduO(F112H) variant showed a DMB-off/His-on interaction between the corrinoid and the enzyme, whose catalytic efficiency was 4 orders of magnitude lower than that of the wild-type protein. The analysis of the kinetic parameters of LrPduO(F112H) suggests that the F112H substitution negatively impacts product release. Substitutions of other hydrophobic residues in the Cbl binding pocket did not result in significant defects in catalytic efficiency in vitro; however, none of the variant enzymes analyzed in this work supported AdoCbl biosynthesis in vivo.« less

Independent Orbiter Assessment (IOA): Analysis of the rudder/speed brake subsystem

NASA Technical Reports Server (NTRS)

Wilson, R. E.; Riccio, J. R.

1986-01-01

The results of the Independent Orbiter Assessment (IOA) of the Failure Modes and Effects Analysis (FMEA) and Critical Items List (CIL) are presented. The IOA approach features a top-down analysis of the hardware to determine failure modes, criticality, and potential critical items. To preserve independence, this analysis was accomplished without reliance upon the results contained within the NASA FMEA/CIL documentation. The independent analysis results for the Orbiter Rudder/Speedbrake Actuation Mechanism is documented. The function of the Rudder/Speedbrake (RSB) is to provide directional control and to provide a means of energy control during entry. The system consists of two panels on a vertical hinge mounted on the aft part of the vertical stabilizer. These two panels move together to form a rudder but split apart to make a speedbrake. The Rudder/Speedbrake Actuation Mechanism consists of the following elements: (1) Power Drive Unit (PDU) which is composed of hydraulic valve module and a hydraulic motor-powered gearbox which contains differentials and mixer gears to provide PDU torque output; (2) four geared rotary actuators which apply the PDU generated torque to the rudder/speedbrake panels; and (3) ten torque shafts which join the PDU to the rotary actuators and interconnect the four rotary actuators. Each level of hardware was evaluated and analyzed for possible failures and causes. Criticality was assigned based upon the severity of the effect for each failure mode. Critical RSB failures which result in potential loss of vehicle control were mainly due to loss of hydraulic fluid, fluid contaminators, and mechanical failures in gears and shafts.

The Determinants of Quality of Life of Nursing Home Residents with Young-Onset Dementia and the Differences between Dementia Subtypes.

PubMed

Appelhof, Britt; Bakker, Christian; Van Duinen-van den Ijssel, Jeannette C L; Zwijsen, Sandra A; Smalbrugge, Martin; Verhey, Frans R J; de Vugt, Marjolein E; Zuidema, Sytse U; Koopmans, Raymond T C M

2017-01-01

The aims of this study are to (1) explore the determinants of quality of life (QoL) in nursing home residents with young-onset dementia (YOD), (2) investigate whether there are differences between dementia subtypes (Alzheimer dementia, vascular/mixed dementia, frontotemporal dementia, other) regarding these determinants, and (3) compare QoL profiles of YOD nursing home residents across dementia subtypes. This cross-sectional study included 207 nursing home residents. Multilevel modeling was used to determine the relationships between QoL and neuropsychiatric symptoms (NPS), dementia severity, psychotropic drug use (PDU), dementia subtype, age, and gender. Additional multilevel models were used to compare aspects of QoL between dementia subtypes. Residents' QoL was negatively associated with advanced dementia, PDU, and NPS. In general, the relationships between the determinants and QoL were similar across the dementia subtypes. Aspects of QoL differed by dementia subtype. Residents with frontotemporal dementia showed less negative emotions, accepted more help and experienced better quality of relationships with professional caregivers, had a more positive self-image, felt more comfortable in the nursing home environment, and experienced lower quality of social relationships. Considering the high rates of NPS and PDU in YOD residents and their negative associations with QoL, we recommend emphasizing services to manage and reduce NPS and PDU in nursing home residents with YOD. Furthermore, our findings suggest accounting for differences in aspects of QoL by dementia subtype to address specific needs and thereby improve QoL. © 2017 The Author(s) Published by S. Karger AG, Basel.

A synthetic system for expression of components of a bacterial microcompartment.

PubMed

Sargent, Frank; Davidson, Fordyce A; Kelly, Ciarán L; Binny, Rachelle; Christodoulides, Natasha; Gibson, David; Johansson, Emelie; Kozyrska, Katarzyna; Lado, Lucia Licandro; Maccallum, Jane; Montague, Rachel; Ortmann, Brian; Owen, Richard; Coulthurst, Sarah J; Dupuy, Lionel; Prescott, Alan R; Palmer, Tracy

2013-11-01

In general, prokaryotes are considered to be single-celled organisms that lack internal membrane-bound organelles. However, many bacteria produce proteinaceous microcompartments that serve a similar purpose, i.e. to concentrate specific enzymic reactions together or to shield the wider cytoplasm from toxic metabolic intermediates. In this paper, a synthetic operon encoding the key structural components of a microcompartment was designed based on the genes for the Salmonella propanediol utilization (Pdu) microcompartment. The genes chosen included pduA, -B, -J, -K, -N, -T and -U, and each was shown to produce protein in an Escherichia coli chassis. In parallel, a set of compatible vectors designed to express non-native cargo proteins was also designed and tested. Engineered hexa-His tags allowed isolation of the components of the microcompartments together with co-expressed, untagged, cargo proteins. Finally, an in vivo protease accessibility assay suggested that a PduD-GFP fusion could be protected from proteolysis when co-expressed with the synthetic microcompartment operon. This work gives encouragement that it may be possible to harness the genes encoding a non-native microcompartment for future biotechnological applications.

Portable duplex ultrasonography: A diagnostic and decision-making tool in reconstructive microsurgery.

PubMed

Gravvanis, Andreas; Karakitsos, Dimitrios; Dimitriou, Vasilios; Zogogiannis, Ioannis; Katsikeris, Nick; Karabinis, Andreas; Tsoutsos, Dimosthenis

2010-07-01

Unidirectional Doppler is a common diagnostic tool by the Reconstructive Microsurgeons; however, it may generate false signals and surely provides less imaging data as compared to duplex ultrasonography. We have reviewed the use of Portable Duplex Ultrasonography (PDU) in 16 patients who underwent complex soft-tissue/bone reconstruction, aiming to determine its role in the design and management of free tissue transfer. According to our data, there were modifications either of the surgical plan and/or of patient's management, based on PDU findings, in 10 out of 16 patients (62.5%). The use of ultrasound directed to subtle modifications in three patients (19%), but to significant changes of the surgical plan in four patients (25%). Also, the use of ultrasound improved significantly the postoperative management in three patients (19%). Thus, significant impact of PDU in patient's treatment was recorded in 44% of cases. Portable ultrasound represents generally available method for preoperative, intraoperative, and postoperative diagnosis and decision-making in free tissue transfer, hence could replace in the near future the unidirectional Doppler in the hands of Microsurgeons. (c) 2010 Wiley-Liss, Inc.

KSC-00pp0502

NASA Image and Video Library

2000-04-13

At Launch Pad 39A, Greg Lohning, who is with NASA, inspects the wiring on the newly installed Power Drive Unit (PDU) in Space Shuttle Atlantis. The PDU controls the rudder/speed brake on the orbiter. Atlantis is scheduled to lift off April 24 at 4:15 p.m. EDT on mission STS-101, the third flight to the International Space Station. The primary mission is to carry logistics and supplies to the Space Station, plus the crew will be preparing the Station for the arrival of the Zvezda Service Module, expected to be launched by Russia in July 2000

KSC-00pp0497

NASA Image and Video Library

2000-04-13

KENNEDY SPACE CENTER, FLA. -- At Launch Pad 39A, a worker watches as the plastic-covered replacement Power Drive Unit (PDU) for Space Shuttle Atlantis is lifted by crane toward the tail. The PDU controls the rudder/speed brake on the orbiter. Atlantis is scheduled to lift off April 24 at 4:15 p.m. EDT on mission STS-101, the third flight to the International Space Station. The primary mission is to carry logistics and supplies to the Space Station, plus the crew will be preparing the Station for the arrival of the Zvezda Service Module, expected to be launched by Russia in July 2000

KSC00pp0497

NASA Image and Video Library

2000-04-13

KENNEDY SPACE CENTER, FLA. -- At Launch Pad 39A, a worker watches as the plastic-covered replacement Power Drive Unit (PDU) for Space Shuttle Atlantis is lifted by crane toward the tail. The PDU controls the rudder/speed brake on the orbiter. Atlantis is scheduled to lift off April 24 at 4:15 p.m. EDT on mission STS-101, the third flight to the International Space Station. The primary mission is to carry logistics and supplies to the Space Station, plus the crew will be preparing the Station for the arrival of the Zvezda Service Module, expected to be launched by Russia in July 2000

Three-dimensional power Doppler ultrasound in the early assessment of response to concurrent chemo-radiotherapy for advanced cervical cancer.

PubMed

Xu, Yan; Zhu, Lijing; Ru, Tong; Wang, Huanhuan; He, Jian; Zhou, Zhengyang; Yang, Xiaofeng

2017-09-01

Background Three-dimensional power Doppler ultrasound (3D-PDU) imaging has been widely applied to the differentiation of benign and malignant cervical lesions; however, its potential value for predicting response to chemo-radiotherapy has not been fully explored. Purpose To investigate the feasibility of 3D-PDU imaging in predicting treatment response in patients receiving concurrent chemo-radiotherapy (CCRT) for advanced cervical cancer. Material and Methods Fifty-two patients with advanced cervical cancer who received CCRT underwent 3D-PDU examinations at four timepoints: pre-therapy (baseline), 1 week and 2 weeks during, as well as immediately post CCRT. Final tumor response was determined by change in tumor size using magnetic resonance imaging (MRI). Cervical tumor volumes and vascular indices were calculated and compared with the clinical outcome. Results Of the 52 patients, 32 patients who completed all four examinations were included in the analyses: 21 were classified as complete response (CR) and 11 as partial response (PR). During the treatment, the CR group showed that 3D vascular indices (VI and VFI) significantly increased at 1 week ( P = 0.028, P = 0.017, respectively) then decreased at 2 weeks and obviously decreased at therapy completion (both P < 0.001), whereas tumors significantly decreased in volume at 2 weeks after therapy initiation ( P < 0.05). However, no significant differences in 3D vascular indices values were seen in the PR group during the treatment course (all P > 0.05). Conclusion Prospective longitudinal 3D-PDU imaging may have potentials in monitoring early therapeutic response to CCRT in patients with cervical cancer.

Acute perforated duodenal ulcer in Maiduguri: experience with simple closure and Helicobacter pylori eradication.

PubMed

Nuhu, A; Madziga, A G; Gali, B M

2009-01-01

Effective medical management of peptic ulcer disease (PUD) has reduced the incidence of gastric outlet obstruction (GOO) as a complication, but perforation especially in the elderly remains unchanged and is in fact on the increase. There is a changing trend in emergency surgery for perforated duodenal ulcer (PDU) from definitive anti ulcer surgery to simple closure followed by Helicobacter pylori eradication. To present our experience in managing PDU with simple closure followed by Helicobacter pylori eradication. This was a chart review of patients managed for PDU over a nine year period (Jan 1999 to Dec 2007) using information obtained from ward admission registers, theatre operation registers, and patients case files from the medical records department. The patients biodata, clinical, and operative findings as well as treatment outcome were extracted for analysis. Of 55 patients eligible for analysis, 44 (80%) were males and 11(20%) females (M to F, 4:1). Their ages ranged between 18 and 65 years with a mean(SD) of 39.9 (13.5) years. Most of the patients, 34 (61.8%), were below 40 years of age and majority 39(71.0%) had a history suggestive of chronic peptic ulcer disease. Twenty six (47.3%) patients presented within 24 hours of perforation, while nine (16.4%) presented more than 72 hours afterwards. The latter group accounted for most, five(55.6%), of the mortality. All the perforations were anterior pyloroduodenal and all except one had simple closure with omental patch followed by a course of a proton pump inhibitor and Helicobacter pylori eradication therapy. Simple closure with omental patch followed by Helicobacter pylori eradication is effective in managing PDU with low morbidity and mortality despite patients late presentation in our center. This technique is recommended in place of a definitive ulcer surgery.

A riboswitch-regulated antisense RNA in Listeria monocytogenes.

PubMed

Mellin, J R; Tiensuu, Teresa; Bécavin, Christophe; Gouin, Edith; Johansson, Jörgen; Cossart, Pascale

2013-08-06

Riboswitches are ligand-binding elements located in 5' untranslated regions of messenger RNAs, which regulate expression of downstream genes. In Listeria monocytogenes, a vitamin B12-binding (B12) riboswitch was identified, not upstream of a gene but downstream, and antisense to the adjacent gene, pocR, suggesting it might regulate pocR in a nonclassical manner. In Salmonella enterica, PocR is a transcription factor that is activated by 1,2-propanediol, and subsequently activates expression of the pdu genes. The pdu genes mediate propanediol catabolism and are implicated in pathogenesis. As enzymes involved in propanediol catabolism require B12 as a cofactor, we hypothesized that the Listeria B12 riboswitch might be involved in pocR regulation. Here we demonstrate that the B12 riboswitch is transcribed as part of a noncoding antisense RNA, herein named AspocR. In the presence of B12, the riboswitch induces transcriptional termination, causing aspocR to be transcribed as a short transcript. In contrast, in the absence of B12, aspocR is transcribed as a long antisense RNA, which inhibits pocR expression. Regulation by AspocR ensures that pocR, and consequently the pdu genes, are maximally expressed only when both propanediol and B12 are present. Strikingly, AspocR can inhibit pocR expression in trans, suggesting it acts through a direct interaction with pocR mRNA. Together, this study demonstrates how pocR and the pdu genes can be regulated by B12 in bacteria and extends the classical definition of riboswitches from elements governing solely the expression of mRNAs to a wider role in controlling transcription of noncoding RNAs.

KSC00pp0498

NASA Image and Video Library

2000-04-13

KENNEDY SPACE CENTER, FLA. -- At Launch Pad 39A, a worker reaches toward the plastic-covered replacement Power Drive Unit (PDU) for Space Shuttle Atlantis as it is lifted by crane toward the tail. The PDU controls the rudder/speed brake on the orbiter. Atlantis is scheduled to lift off April 24 at 4:15 p.m. EDT on mission STS-101, the third flight to the International Space Station. The primary mission is to carry logistics and supplies to the Space Station, plus the crew will be preparing the Station for the arrival of the Zvezda Service Module, expected to be launched by Russia in July 2000

Low Cost Solar Array Project. Feasibility of the silane process for producing semiconductor-grade silicon. Final report, October 1975-March 1979

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1979-06-01

The commercial production of low-cost semiconductor-grade silicon is an essential requirement of the JPL/DOE (Department of Energy) Low-Cost Solar Array (LSA) Project. A 1000-metric-ton-per-year commercial facility using the Union Carbide Silane Process will produce molten silicon for an estimated price of $7.56/kg (1975 dollars, private financing), meeting the DOE goal of less than $10/kg. Conclusions and technology status are reported for both contract phases, which had the following objectives: (1) establish the feasibility of Union Carbide's Silane Process for commercial application, and (2) develop an integrated process design for an Experimental Process System Development Unit (EPSDU) and a commercial facility,more » and estimate the corresponding commercial plant economic performance. To assemble the facility design, the following work was performed: (a) collection of Union Carbide's applicable background technology; (b) design, assembly, and operation of a small integrated silane-producing Process Development Unit (PDU); (c) analysis, testing, and comparison of two high-temperature methods for converting pure silane to silicon metal; and (d) determination of chemical reaction equilibria and kinetics, and vapor-liquid equilibria for chlorosilanes.« less

Integration of Fire Control, Flight Control and Propulsion Control Systems.

DTIC Science & Technology

1983-08-01

process of preparation to a degree imocmpatible with fast moving technology. Undoubtedly something can be done to see that US authors produce papers...PDU provide a true "Up Front" system controller. Fast selection of Air to Air Mode is provided by 2 pushbuttons on the throttle. Pushing one or both...nature of the load snd its effect on the generation system. This calculation will include Load Power, Reactance, Nature - continuous or intermittent

'Allowing the right' and its currency in managing drug stigma in Greece.

PubMed

Fotopoulou, Maria; Munro, Alison; Taylor, Avril

2015-08-01

Evidence suggests that problem drug users are still subject to high levels of stigmatization. In countries, like Greece, where families occupy a central position and honour is collectively attained, secondary drug stigma is also highly prevalent. However, little is known about how drug users and their families manage drug stigma in the specific cultural milieu that makes up Greece. This article presents findings from a qualitative study exploring how drug stigma both manifests itself and is managed by drug users and parents in the context of Greek familial culture. The study was conducted in two state drug agencies in Thessaloniki - Greece and involved the participation of 40 problem drug users (PDU) (23 male/17 female) and 8 parents of PDU. Qualitative, in-depth, interviews were used to collect narrative accounts about experiences of managing addiction, drug stigma and secondary stigma in the Greek parental home. 'Allowing the right' - broadly understood as referring to passing to others information which might devalue a person and consequently that person's family - is discussed in terms of drug stigma management in Greece. We highlight how this culturally specific notion can be viewed as an active strategy adopted by both individual drug users and parents of PDU to manage stigmatization by illustrating the various way in which not 'allowing the right' was described by participants, including drug problem discovery or disclosure and subsequent management of drug using careers and drug stigma within the Greek family context. Given the significance of the cultural notion of 'allowing the right' in the trajectory of drug use amongst PDU and more particularly in stigma management and secondary stigma management, the paper highlights the need for further research into the field in Greece. The need for targeted culturally specific and culturally relevant interventions aimed at reducing drug stigma is also highlighted in relation to both policy and practice. Copyright © 2015 Elsevier B.V. All rights reserved.

Spatiotemporal image correlation-derived volumetric Doppler impedance indices from spherical samples of the placenta: intraobserver reliability and correlation with conventional umbilical artery Doppler indices.

PubMed

Welsh, A W; Hou, M; Meriki, N; Martins, W P

2012-10-01

Volumetric impedance indices derived from spatiotemporal image correlation (STIC) power Doppler ultrasound (PDU) might overcome the influence of machine settings and attenuation. We examined the feasibility of obtaining these indices from spherical samples of anterior placentas in healthy pregnancies, and assessed intraobserver reliability and correlation with conventional umbilical artery (UA) impedance indices. Uncomplicated singleton pregnancies with anterior placenta were included in the study. A single observer evaluated UA pulsatility index (PI), resistance index (RI) and systolic/diastolic ratio (S/D) and acquired three STIC-PDU datasets from the placenta just above the placental cord insertion. Another observer analyzed the STIC-PDU datasets using Virtual Organ Computer-aided AnaLysis (VOCAL) spherical samples from every frame to determine the vascularization index (VI) and vascularization flow index (VFI); maximum, minimum and average values were used to determine the three volumetric impedance indices (vPI, vRI, vS/D). Intraobserver reliability was examined by intraclass correlation coefficients (ICC) and association between volumetric indices from placenta, and UA Doppler indices were assessed by Pearson's correlation coefficient. A total of 25 pregnant women were evaluated but five were excluded because of artifacts observed during analysis. The reliability of measurement of volumetric indices of both VI and VFI from three STIC-PDU datasets was similar, with all ICCs ≥ 0.78. Pearson's r values showed a weak and non-significant correlation between UA pulsed-wave Doppler indices and their respective volumetric indices from spherical samples of placenta (all r ≥ 0.23). VOCAL indices from specific phases of the cardiac cycle showed good repeatability (ICC ≥ 0.92). Volumetric impedance indices determined from spherical samples of placenta are sufficiently reliable but do not correlate with UA Doppler indices in healthy pregnancies. Copyright © 2012 ISUOG. Published by John Wiley & Sons, Ltd.

Proceedings of the Conference on Computer Generated Forces and Behavioral Representation (6th), Held in Orlando, Florida, on 23-25 July 1996

DTIC Science & Technology

1996-07-01

JIATFE employs a mixture of DoD and DLEA assets and sensors to conduct routine patrol operations and respond to changing intelligence assessments...to evolve. These changes range from changing protocol data unit (PDU) formats to introduction of new behaviors, such as infrared sensor management...load, sensors , damage assessment, and physical status. In addition, the PDC contains the processes for computing physical state changes such as

Is there a relation between priapism occurring after penile doppler ultrasonography and international erectile function index score and erection hardness score levels?

PubMed

Sönmez, Mehmet Giray; Öztürk, Ahmet

2017-12-01

The relation between Erection Hardness Score (EHS) and The International Erectile Function Index (IIEF) Questionnaire- Erectile Function Domain Score (IIEF-EF score) used in erectile dysfunction (ED) evaluation and the prevalence of priapism after penile Doppler ultrasonography (PDU) was examined in this study. A total of 62 patients who had PDU were included in the study. Patients were divided into two groups; there were 33 patients in IIEF-EF score ≤10, EHS <2 group (Group 1) and 29 patients in IIEF-EF score >10, EHS ≥2 group (Group 2). The two groups separated according to their scores were compared for age, body mass index (BMI), prevalence of priapism, vascular comorbidities and duration of erection. When compared to Group 2, median age, rate of vascular comorbidities rate and BMI were detected to be higher in Group 1 with IIEF-EF score ≤10 and EHS <2. But contrary to age and rate of vascular comorbidities (p=0.035, p=0.049 respectively), higher BMI was detected to be statistically insignificant (p=0.093). Duration of erection, IIEF-EF score and number of cases with priapism were significantly higher in Group 2 with IIEF-EF score >10 and EHS ≥2 (p<0.001, p=0.027, p=0.049 respectively). High IIEF-EF and EHS scores, younger ages and lower rates of vascular comorbidities in patients from whom PDU was demanded increase the prevalence of priapism.

Voss with Pille TLD reader

NASA Image and Video Library

2001-06-26

ISS002-E-7814 (26 June 2001) --- James S. Voss, Expedition Two flight engineer, sets up the Human Research Facility's (HRF) Dosimetric Mapping (DOSMAP) Power Distribution Unit (PDU) in Destiny. The image was taken with a digital still camera.

Electron heating at interplanetary shocks

NASA Technical Reports Server (NTRS)

Feldman, W. C.; Asbridge, J. R.; Bame, S. J.; Gosling, J. T.; Zwickl, R. D.

1982-01-01

Data for 41 forward interplanetary shocks show that the ratio of downstream to upstream electron temperatures, T/sub e/(d/u) is variable in the range between 1.0 (isothermal) and 3.0. On average, (T/sub e/(d/u) = 1.5 with a standard deviation, sigma e = 0.5. This ratio is less than the average ratio of proton temperatures across the same shocks, (T/sub p/(d/u)) = 3.3 with sigma p = 2.5 as well as the average ratio of electron temperatures across the Earth's bow shock. Individual samples of T/sub e/(d/u) and T/sub p/(d/u) appear to be weakly correlated with the number density ratio. However the amounts of electron and proton heating are well correlated with each other as well as with the bulk velocity difference across each shock. The stronger shocks appear to heat the protons relatively more efficiently than they heat the electrons.

Is there a relation between priapism occurring after penile doppler ultrasonography and international erectile function index score and erection hardness score levels?

PubMed Central

Sönmez, Mehmet Giray; Öztürk, Ahmet

2017-01-01

Objective The relation between Erection Hardness Score (EHS) and The International Erectile Function Index (IIEF) Questionnaire- Erectile Function Domain Score (IIEF-EF score) used in erectile dysfunction (ED) evaluation and the prevalence of priapism after penile Doppler ultrasonography (PDU) was examined in this study. Material and methods A total of 62 patients who had PDU were included in the study. Patients were divided into two groups; there were 33 patients in IIEF-EF score ≤10, EHS <2 group (Group 1) and 29 patients in IIEF-EF score >10, EHS ≥2 group (Group 2). The two groups separated according to their scores were compared for age, body mass index (BMI), prevalence of priapism, vascular comorbidities and duration of erection. Results When compared to Group 2, median age, rate of vascular comorbidities rate and BMI were detected to be higher in Group 1 with IIEF-EF score ≤10 and EHS <2. But contrary to age and rate of vascular comorbidities (p=0.035, p=0.049 respectively), higher BMI was detected to be statistically insignificant (p=0.093). Duration of erection, IIEF-EF score and number of cases with priapism were significantly higher in Group 2 with IIEF-EF score >10 and EHS ≥2 (p<0.001, p=0.027, p=0.049 respectively). Conclusion High IIEF-EF and EHS scores, younger ages and lower rates of vascular comorbidities in patients from whom PDU was demanded increase the prevalence of priapism. PMID:29201505

Modular System Control Development Model (MSCDM). Design Specification.

DTIC Science & Technology

1979-08-01

with power supply and ¶ can be used independently of the loop. The PDU can be used as a general purpose processor. The loop is contained in a separate...inputs to nodes 22 (VSQC), 23 (DSQC ) , and 26 (BWBSA) will be generated by a LSI—ll microprocessor used as a simulated input generator (SIG). The SIG...who c o b m n u n i — cate tau lt - s to the FIAC module. F~IAC generates even t reports to the OCRI and DBMS. The PDP1I/40 in loop 2 generates

Coal-oil coprocessing at HTI - development and improvement of the technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stalzer, R.H.; Lee, L.K.; Hu, J.

1995-12-31

Co-Processing refers to the combined processing of coal and petroleum-derived heavy oil feedstocks. The coal feedstocks used are those typically utilized in direct coal liquefaction: bituminous, subbituminous, and lignites. Petroleum-derived oil, is typically a petroleum residuum, containing at least 70 W% material boiling above 525{degrees}C. The combined coal and oil feedstocks are processed simultaneously with the dual objective of liquefying the coal and upgrading the petroleum-derived residuum to lower boiling (<525{degrees}C) premium products. HTI`s investigation of the Co-Processing technology has included work performed in laboratory, bench and PDU scale operations. The concept of co-processing technology is quite simple and amore » natural outgrowth of the work done with direct coal liquefaction. A 36 month program to evaluate new process concepts in coal-oil coprocessing at the bench-scale was begun in September 1994 and runs until September 1997. Included in this continuous bench-scale program are provisions to examine new improvements in areas such as: interstage product separation, feedstock concentrations (coal/oil), improved supported/dispersed catalysts, optimization of reactor temperature sequencing, and in-line hydrotreating. This does not preclude other ideas from DOE contracts and other sources that can lead to improved product quality and economics. This research work has led to important findings which significantly increased liquid yields, improved product quality, and improved process economics.« less

The direct liquefaction proof of concept program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Comolli, A.G.; Lee, L.K.; Pradhan, V.R.

1995-12-31

The goal of the Proof of Concept (POC) Program is to develop Direct Coal Liquefaction and associated transitional technologies towards commercial readiness for economically producing premium liquid fuels from coal in an environmentally acceptable manner. The program focuses on developing the two-stage liquefaction (TSL) process by utilizing geographically strategic feedstocks, commercially feasible catalysts, new prototype equipment, and testing co-processing or alternate feedstocks and improved process configurations. Other high priority objectives include dispersed catalyst studies, demonstrating low rank coal liquefaction without solids deposition, improving distillate yields on a unit reactor volume basis, demonstrating ebullated bed operations while obtaining scale-up data, demonstratingmore » optimum catalyst consumption using new concepts (e.g. regeneration, cascading), producing premium products through on-line hydrotreating, demonstrating improved hydrogen utilization for low rank coals using novel heteroatom removal methods, defining and demonstrating two-stage product properties for upgrading; demonstrating efficient and economic solid separation methods, examining the merits of integrated coal cleaning, demonstrating co-processing, studying interactions between the preheater and first and second-stage reactors, improving process operability by testing and incorporating advanced equipment and instrumentation, and demonstrating operation with alternate coal feedstocks. During the past two years major PDU Proof of Concept runs were completed. POC-1 with Illinois No. 6 coal and POC-2 with Black Thunder sub-bituminous coal. Results from these operations are continuing under review and the products are being further refined and upgraded. This paper will update the results from these operations and discuss future plans for the POC program.« less

Partial amino acid sequence of the branched chain amino acid aminotransferase (TmB) of E. coli JA199 pDU11

DOE Office of Scientific and Technical Information (OSTI.GOV)

Feild, M.J.; Armstrong, F.B.

1987-05-01

E. coli JA199 pDU11 harbors a multicopy plasmid containing the ilv GEDAY gene cluster of S. typhimurium. TmB, gene product of ilv E, was purified, crystallized, and subjected to Edman degradation using a gas phase sequencer. The intact protein yielded an amino terminal 31 residue sequence. Both carboxymethylated apoenzyme and (/sup 3/H)-NaBH-reduced holoenzyme were then subjected to digestion by trypsin. The digests were fractionated using reversed phase HPLC, and the peptides isolated were sequenced. The borohydride-treated holoenzyme was used to isolate the cofactor-binding peptide. The peptide is 27 residues long and a comparison with known sequences of other aminotransferases revealedmore » limited homology. Peptides accounting for 211 of 288 predicted residues have been sequenced, including 9 residues of the carboxyl terminus. Comparison of peptides with the inferred amino acid sequence of the E. coli K-12 enzyme has helped determine the sequence of the amino terminal 59 residues; only two differences between the sequences are noted in this region.« less

Presence of enteric viruses in source waters for drinking water production in The Netherlands.

PubMed

Lodder, W J; van den Berg, H H J L; Rutjes, S A; de Roda Husman, A M

2010-09-01

The quality of drinking water in The Netherlands has to comply with the Dutch Drinking Water Directive: less than one infection in 10,000 persons per year may occur due to consumption of unboiled drinking water. Since virus concentrations in drinking waters may be below the detection limit but entail a public health risk, the infection risk from drinking water consumption requires the assessment of the virus concentrations in source waters and of the removal efficiency of treatment processes. In this study, samples of source waters were taken during 4 years of regular sampling (1999 to 2002), and enteroviruses, reoviruses, somatic phages, and F-specific phages were detected in 75% (range, 0.0033 to 5.2 PFU/liter), 83% (0.0030 to 5.9 PFU/liter), 100% (1.1 to 114,156 PFU/liter), and 97% (0.12 to 14,403 PFU/liter), respectively, of 75 tested source water samples originating from 10 locations for drinking water production. By endpoint dilution reverse transcription-PCR (RT-PCR), 45% of the tested source water samples were positive for norovirus RNA (0.22 to 177 PCR-detectable units [PDU]/liter), and 48% were positive for rotavirus RNA (0.65 to 2,249 PDU/liter). Multiple viruses were regularly detected in the source water samples. A significant correlation between the concentrations of the two phages and those of the enteroviruses could be demonstrated. The virus concentrations varied greatly between 10 tested locations, and a seasonal effect was observed. Peak concentrations of pathogenic viruses occur in source waters used for drinking water production. If seasonal and short-term fluctuations coincide with less efficient or failing treatment, an unacceptable public health risk from exposure to this drinking water may occur.

Selective Prevention: Addressing Vulnerability to Problem Drug Use in Europe

ERIC Educational Resources Information Center

Burkhart, Gregor; Gyarmathy, V. Anna; Bo, Alessandra

2011-01-01

Following the 2003 publication of the European Union (EU) Council Recommendations and the 2005-2008 and 2009-2012 EU Drugs Action Plans, increasing attention has been given in EU member states' drug policies to populations that are vulnerable to problem drug use (PDU). Monitoring data reported to the EMCDDA by designated agencies from 30 countries…

Catalytic multi-stage liquefaction of coal at HTI: Bench-scale studies in coal/waste plastics coprocessing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pradhan, V.R.; Lee, L.K.; Stalzer, R.H.

1995-12-31

The development of Catalytic Multi-Stage Liquefaction (CMSL) at HTI has focused on both bituminous and sub-bituminous coals using laboratory, bench and PDU scale operations. The crude oil equivalent cost of liquid fuels from coal has been curtailed to about $30 per barrel, thus achieving over 30% reduction in the price that was evaluated for the liquefaction technologies demonstrated in the late seventies and early eighties. Contrary to the common belief, the new generation of catalytic multistage coal liquefaction process is environmentally very benign and can produce clean, premium distillates with a very low (<10ppm) heteroatoms content. The HTI Staff hasmore » been involved over the years in process development and has made significant improvements in the CMSL processing of coals. A 24 month program (extended to September 30, 1995) to study novel concepts, using a continuous bench scale Catalytic Multi-Stage unit (30kg coal/day), has been initiated since December, 1992. This program consists of ten bench-scale operations supported by Laboratory Studies, Modelling, Process Simulation and Economic Assessments. The Catalytic Multi-Stage Liquefaction is a continuation of the second generation yields using a low/high temperature approach. This paper covers work performed between October 1994- August 1995, especially results obtained from the microautoclave support activities and the bench-scale operations for runs CMSL-08 and CMSL-09, during which, coal and the plastic components for municipal solid wastes (MSW) such as high density polyethylene (HDPE)m, polypropylene (PP), polystyrene (PS), and polythylene terphthlate (PET) were coprocessed.« less

Expeditionary Oblong Mezzanine

DTIC Science & Technology

2016-03-01

Operating System OSI Open Systems Interconnection OS X Operating System Ten PDU Power Distribution Unit POE Power Over Ethernet xvii SAAS ...providing infrastructure as a service (IaaS) and software as a service ( SaaS ) cloud computing technologies. IaaS is a way of providing computing services...such as servers, storage, and network equipment services (Mell & Grance, 2009). SaaS is a means of providing software and applications as an on

STS-53 Discovery, OV-103, DOD Hercules digital electronic imagery equipment

NASA Technical Reports Server (NTRS)

1992-01-01

STS-53 Discovery, Orbiter Vehicle (OV) 103, Department of Defense (DOD) mission Hand-held Earth-oriented Real-time Cooperative, User-friendly, Location, targeting, and Environmental System (Hercules) spaceborne experiment equipment is documented in this table top view. HERCULES is a joint NAVY-NASA-ARMY payload designed to provide real-time high resolution digital electronic imagery and geolocation (latitude and longitude determination) of earth surface targets of interest. HERCULES system consists of (from left to right): a specially modified GRID Systems portable computer mounted atop NASA developed Playback-Downlink Unit (PDU) and the Naval Research Laboratory (NRL) developed HERCULES Attitude Processor (HAP); the NASA-developed Electronic Still Camera (ESC) Electronics Box (ESCEB) including removable imagery data storage disks and various connecting cables; the ESC (a NASA modified Nikon F-4 camera) mounted atop the NRL HERCULES Inertial Measurement Unit (HIMU) containing the three

STS-53 Discovery, OV-103, DOD Hercules digital electronic imagery equipment

NASA Image and Video Library

1992-04-22

STS-53 Discovery, Orbiter Vehicle (OV) 103, Department of Defense (DOD) mission Hand-held Earth-oriented Real-time Cooperative, User-friendly, Location, targeting, and Environmental System (Hercules) spaceborne experiment equipment is documented in this table top view. HERCULES is a joint NAVY-NASA-ARMY payload designed to provide real-time high resolution digital electronic imagery and geolocation (latitude and longitude determination) of earth surface targets of interest. HERCULES system consists of (from left to right): a specially modified GRID Systems portable computer mounted atop NASA developed Playback-Downlink Unit (PDU) and the Naval Research Laboratory (NRL) developed HERCULES Attitude Processor (HAP); the NASA-developed Electronic Still Camera (ESC) Electronics Box (ESCEB) including removable imagery data storage disks and various connecting cables; the ESC (a NASA modified Nikon F-4 camera) mounted atop the NRL HERCULES Inertial Measurement Unit (HIMU) containing the three-axis ring-laser gyro.

Laser Induced Nuclear Fusion, LINF, In Muonic Molecules With Ultrashort Super Intense Laser Fields

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bandrauk, Andre D.; Paramonov, Gennady K.

2010-02-02

Muonium molecules where muons replace electrons increase the stability of molecules to ionization at superhigh intensities, I>10{sup 20} W/cm{sup 2}. We show furthermore from numerical simulations that in the nonsymmetric series, pdu, dtu, ptu, the permanent dipole moments can be used to enhance LINF, Laser Induced Nuclear Fusion by laser induced recollision of the light nucleus with the heavier nucleus.

Natural Attenuation of Nonionic Surfactants Used in Hydraulic Fracturing Fluids: Degradation Rates, Pathways, and Mechanisms.

PubMed

Heyob, Katie M; Blotevogel, Jens; Brooker, Michael; Evans, Morgan V; Lenhart, John J; Wright, Justin; Lamendella, Regina; Borch, Thomas; Mouser, Paula J

2017-12-05

Hydraulic fracturing fluids are injected into shales to extend fracture networks that enhance oil and natural gas production from unconventional reservoirs. Here we evaluated the biodegradability of three widely used nonionic polyglycol ether surfactants (alkyl ethoxylates (AEOs), nonylphenol ethoxylates (NPEOs), and polypropylene glycols (PPGs)) that function as weatherizers, emulsifiers, wetting agents, and corrosion inhibitors in injected fluids. Under anaerobic conditions, we observed complete removal of AEOs and NPEOs from solution within 3 weeks regardless of whether surfactants were part of a chemical mixture or amended as individual additives. Microbial enzymatic chain shortening was responsible for a shift in ethoxymer molecular weight distributions and the accumulation of the metabolite acetate. PPGs bioattenuated the slowest, producing sizable concentrations of acetone, an isomer of propionaldehyde. Surfactant chain shortening was coupled to an increased abundance of the diol dehydratase gene cluster (pduCDE) in Firmicutes metagenomes predicted from the 16S rRNA gene. The pduCDE enzymes are responsible for cleaving ethoxylate chain units into aldehydes before their fermentation into alcohols and carboxylic acids. These data provide new mechanistic insight into the environmental fate of hydraulic fracturing surfactants after accidental release through chain shortening and biotransformation, emphasizing the importance of compound structure disclosure for predicting biodegradation products.

The Common Gut Microbe Eubacterium hallii also Contributes to Intestinal Propionate Formation

PubMed Central

Engels, Christina; Ruscheweyh, Hans-Joachim; Beerenwinkel, Niko; Lacroix, Christophe; Schwab, Clarissa

2016-01-01

Eubacterium hallii is considered an important microbe in regard to intestinal metabolic balance due to its ability to utilize glucose and the fermentation intermediates acetate and lactate, to form butyrate and hydrogen. Recently, we observed that E. hallii is capable of metabolizing glycerol to 3-hydroxypropionaldehyde (3-HPA, reuterin) with reported antimicrobial properties. The key enzyme for glycerol to 3-HPA conversion is the cobalamin-dependent glycerol/diol dehydratase PduCDE which also utilizes 1,2-propanediol (1,2-PD) to form propionate. Therefore our primary goal was to investigate glycerol to 3-HPA metabolism and 1,2-PD utilization by E. hallii along with its ability to produce cobalamin. We also investigated the relative abundance of E. hallii in stool of adults using 16S rRNA and pduCDE based gene screening to determine the contribution of E. hallii to intestinal propionate formation. We found that E. hallii utilizes glycerol to produce up to 9 mM 3-HPA but did not further metabolize 3-HPA to 1,3-propanediol. Utilization of 1,2-PD in the presence and absence of glucose led to the formation of propanal, propanol and propionate. E. hallii formed cobalamin and was detected in stool of 74% of adults using 16S rRNA gene as marker gene (n = 325). Relative abundance of the E. hallii 16S rRNA gene ranged from 0 to 0.59% with a mean relative abundance of 0.044%. E. hallii PduCDE was detected in 63 to 81% of the metagenomes depending on which subunit was investigated beside other taxons such as Ruminococcus obeum, R. gnavus, Flavonifractor plautii, Intestinimonas butyriciproducens, and Veillonella spp. In conclusion, we identified E. hallii as a common gut microbe with the ability to convert glycerol to 3-HPA, a step that requires the production of cobalamin, and to utilize 1,2-PD to form propionate. Our results along with its ability to use a broad range of substrates point at E. hallii as a key species within the intestinal trophic chain with the potential to highly impact the metabolic balance as well as the gut microbiota/host homeostasis by the formation of different short chain fatty acids. PMID:27242734

The Common Gut Microbe Eubacterium hallii also Contributes to Intestinal Propionate Formation.

PubMed

Engels, Christina; Ruscheweyh, Hans-Joachim; Beerenwinkel, Niko; Lacroix, Christophe; Schwab, Clarissa

2016-01-01

Eubacterium hallii is considered an important microbe in regard to intestinal metabolic balance due to its ability to utilize glucose and the fermentation intermediates acetate and lactate, to form butyrate and hydrogen. Recently, we observed that E. hallii is capable of metabolizing glycerol to 3-hydroxypropionaldehyde (3-HPA, reuterin) with reported antimicrobial properties. The key enzyme for glycerol to 3-HPA conversion is the cobalamin-dependent glycerol/diol dehydratase PduCDE which also utilizes 1,2-propanediol (1,2-PD) to form propionate. Therefore our primary goal was to investigate glycerol to 3-HPA metabolism and 1,2-PD utilization by E. hallii along with its ability to produce cobalamin. We also investigated the relative abundance of E. hallii in stool of adults using 16S rRNA and pduCDE based gene screening to determine the contribution of E. hallii to intestinal propionate formation. We found that E. hallii utilizes glycerol to produce up to 9 mM 3-HPA but did not further metabolize 3-HPA to 1,3-propanediol. Utilization of 1,2-PD in the presence and absence of glucose led to the formation of propanal, propanol and propionate. E. hallii formed cobalamin and was detected in stool of 74% of adults using 16S rRNA gene as marker gene (n = 325). Relative abundance of the E. hallii 16S rRNA gene ranged from 0 to 0.59% with a mean relative abundance of 0.044%. E. hallii PduCDE was detected in 63 to 81% of the metagenomes depending on which subunit was investigated beside other taxons such as Ruminococcus obeum, R. gnavus, Flavonifractor plautii, Intestinimonas butyriciproducens, and Veillonella spp. In conclusion, we identified E. hallii as a common gut microbe with the ability to convert glycerol to 3-HPA, a step that requires the production of cobalamin, and to utilize 1,2-PD to form propionate. Our results along with its ability to use a broad range of substrates point at E. hallii as a key species within the intestinal trophic chain with the potential to highly impact the metabolic balance as well as the gut microbiota/host homeostasis by the formation of different short chain fatty acids.

A Go-type opsin mediates the shadow reflex in the annelid Platynereis dumerilii.

PubMed

Ayers, Thomas; Tsukamoto, Hisao; Gühmann, Martin; Veedin Rajan, Vinoth Babu; Tessmar-Raible, Kristin

2018-04-18

The presence of photoreceptive molecules outside the eye is widespread among animals, yet their functions in the periphery are less well understood. Marine organisms, such as annelid worms, exhibit a 'shadow reflex', a defensive withdrawal behaviour triggered by a decrease in illumination. Herein, we examine the cellular and molecular underpinnings of this response, identifying a role for a photoreceptor molecule of the G o -opsin class in the shadow response of the marine bristle worm Platynereis dumerilii. We found Pdu-Go-opsin1 expression in single specialised cells located in adult Platynereis head and trunk appendages, known as cirri. Using gene knock-out technology and ablation approaches, we show that the presence of Go-opsin1 and the cirri is necessary for the shadow reflex. Consistently, quantification of the shadow reflex reveals a chromatic dependence upon light of approximately 500 nm in wavelength, matching the photoexcitation characteristics of the Platynereis Go-opsin1. However, the loss of Go-opsin1 does not abolish the shadow reflex completely, suggesting the existence of a compensatory mechanism, possibly acting through a ciliary-type opsin, Pdu-c-opsin2, with a Lambda max of approximately 490 nm. We show that a Go-opsin is necessary for the shadow reflex in a marine annelid, describing a functional example for a peripherally expressed photoreceptor, and suggesting that, in different species, distinct opsins contribute to varying degrees to the shadow reflex.

Shuttle Rudder/Speed Brake Power Drive Unit (PDU) Gear Scuffing Tests With Flight Gears

NASA Technical Reports Server (NTRS)

Proctor, Margaret P.; Oswald, Fred B.; Krants, Timothy L.

2005-01-01

Scuffing-like damage has been found on the tooth surfaces of gears 5 and 6 of the NASA space shuttle rudder/speed brake power drive unit (PDU) number 2 after the occurrence of a transient back-driving event in flight. Tests were conducted using a pair of unused spare flight gears in a bench test at operating conditions up to 2866 rpm and 1144 in.-lb at the input ring gear and 14,000 rpm and 234 in.-lb at the output pinion gear, corresponding to a power level of 52 hp. This test condition exceeds the maximum estimated conditions expected in a backdriving event thought to produce the scuffing damage. Some wear marks were produced, but they were much less severe than the scuffing damaged produced during shuttle flight. Failure to produce scuff damage like that found on the shuttle may be due to geometrical variations between the scuffed gears and the gears tested herein, more severe operating conditions during the flight that produced the scuff than estimated, the order of the test procedures, the use of new hydraulic oil, differences between the dynamic response of the flight gearbox and the bench-test gearbox, or a combination of these. This report documents the test gears, apparatus, and procedures, summarizes the test results, and includes a discussion of the findings, conclusions, and recommendations.

Construction of shuttle vectors capable of conjugative transfer from Escherichia coli to nitrogen-fixing filamentous cyanobacteria.

PubMed Central

Wolk, C P; Vonshak, A; Kehoe, P; Elhai, J

1984-01-01

Wild-type cyanobacteria of the genus Anabaena are capable of oxygenic photosynthesis, differentiation of cells called heterocysts at semiregular intervals along the cyanobacterial filaments, and aerobic nitrogen fixation by the heterocysts. To foster analysis of the physiological processes characteristic of these cyanobacteria, we have constructed a family of shuttle vectors capable of replication and selection in Escherichia coli and, in unaltered form, in several strains of Anabaena. Highly efficient conjugative transfer of these vectors from E. coli to Anabaena is dependent upon the presence of broad host-range plasmid RP-4 and of helper plasmids. The shuttle vectors contain portions of plasmid pBR322 required for replication and mobilization, with sites for Anabaena restriction enzymes deleted; cyanobacterial replicon pDU1, which lacks such sites; and determinants for resistance to chloramphenicol, streptomycin, neomycin, and erythromycin. Images PMID:6324204

Perforated duodenal ulcer; management in a resource poor, semi-urban nigerian hospital.

PubMed

Oribabor, Felix O; Adebayo, Bamidele O; Aladesanmi, Tunde; Akinola, David O

2013-01-01

Perforated duodenal ulcer (PDU) is still seen frequently in the study center inspite of the free use of effective medical curative therapy. We then set out to ascertain the pattern of presentation, peculiar risk factors in the study environment, re-evaluate our method of management, and to see if it is adequate for patients in a developing country. This is a retrospective study of patients admitted and managed for PDUs, between January 2004 and December 2011 at the Federal Medical Centre, IdoEkiti, Southwest Nigeria. The records of patients were retrieved and demographic data relating to age, sex, symptoms, duration, diagnosis, intra-operative findings, and management outcome were extracted. The results were analyzed. A total of 30 patients were admitted and operated during this period. Twenty-eight of them were males and two were females. The mean age was 47 years and the male: female ratio was 14:1. The duration of symptoms before presentation ranged from 2 to 7 days. None of the patients had a prior diagnosis of their ulcers, by an upper gastro intestinal endoscopy before presentation; although most had dyspeptic symptoms, with inadequate or no medical treatment. The notable peculiar risk factor was the abuse of local herbal concoction for body pains by all the patients. Seven patients smokes, 15 consumes alcohol, and only two take non-steroidal anti-inflammatory drugs for body pains. Most of the managed patients; 26 were satisfactorily discharged home and later followed-up at the surgical out-patient department. Four mortality was recorded during the period of study. PDU is still a major complication of chronic peptic ulcer disease. Simple omental patch and H. pylori eradication is no longer appropriate as a mode of treatment for the youths who are mostly affected in the center. We therefore, suggest a more wide spread use of definitive ulcer surgery for most of our patients with no pre-operative risk factors.

Comparison of Key Absorption and Optical Properties Between Pure and Transported Anthropogenic Dust over East and Central Asia

NASA Technical Reports Server (NTRS)

Bi, Jianrong; Huang, Jianping; Holben, Brent N.; Zhang, Guolong

2016-01-01

Asian dust particulate is one of the primary aerosol constituents in the Earth-atmosphere system that exerts profound influences on environmental quality, human health, the marine biogeochemical cycle, and Earth's climate. To date, the absorptive capacity of dust aerosol generated from the Asian desert region is still an open question. In this article, we compile columnar key absorption and optical properties of mineral dust over East and Central Asian areas by utilizing the multiyear quality-assured datasets observed at 13 sites of the Aerosol Robotic Network (AERONET). We identify two types of Asian dust according to threshold criteria from previously published literature. (1) The particles with high aerosol optical depth at 440 nm (AOD(440) > or = 0.4) and a low Angstrom wavelength exponent at 440-870 nm (alpha < 0.2) are defined as Pure Dust (PDU), which decreases disturbance of other non-dust aerosols and keeps high accuracy of pure Asian dust. (2) The particles with AOD(440) > or = 0.4 and 0.2 < alpha < 0.6 are designated as Transported Anthropogenic Dust (TDU), which is mainly dominated by dust aerosol and might mix with other anthropogenic aerosol types. Our results reveal that the primary components of high AOD days are predominantly dust over East and Central Asian regions, even if their variations rely on different sources, distance from the source, emission mechanisms, and meteorological characteristics. The overall mean and standard deviation of single-scattering albedo, asymmetry factor, real part and imaginary part of complex refractive index at 550 nm for Asian PDU are 0.935 +/- 0.014, 0.742 +/- 0.008, 1.526 +/- 0.029, and 0.00226 +/- 0.00056, respectively, while corresponding values are 0.921 +/- 0.021, 0.723 +/- 0.009, 1.521 +/- 0.025, and 0.00364 +/- 0.0014 for Asian TDU. Aerosol shortwave direct radiative effects at the top of the atmosphere (TOA), at the surface (SFC), and in the atmospheric layer (ATM) for Asian PDU (alpha < 0.2) and TDU (0.2 < alpha < 0.6) computed in this study, are a factor of 2 smaller than the results of Optical Properties of Aerosols and Clouds (OPAC) mineral-accumulated (mineral-acc.) and mineral-transported (mineral-tran.) modes. Therefore, we are convinced that our results hold promise for updating and improving accuracies of Asian dust characteristics in present-day remote sensing applications and regional or global climate models.

Comparison of key absorption and optical properties between pure and transported anthropogenic dust over East and Central Asia

NASA Astrophysics Data System (ADS)

Bi, Jianrong; Huang, Jianping; Holben, Brent; Zhang, Guolong

2016-12-01

Asian dust particulate is one of the primary aerosol constituents in the Earth-atmosphere system that exerts profound influences on environmental quality, human health, the marine biogeochemical cycle, and Earth's climate. To date, the absorptive capacity of dust aerosol generated from the Asian desert region is still an open question. In this article, we compile columnar key absorption and optical properties of mineral dust over East and Central Asian areas by utilizing the multiyear quality-assured datasets observed at 13 sites of the Aerosol Robotic Network (AERONET). We identify two types of Asian dust according to threshold criteria from previously published literature. (1) The particles with high aerosol optical depth at 440 nm (AOD440 ≥ 0.4) and a low Ångström wavelength exponent at 440-870 nm (α < 0.2) are defined as Pure Dust (PDU), which decreases disturbance of other non-dust aerosols and keeps high accuracy of pure Asian dust. (2) The particles with AOD440 ≥ 0.4 and 0.2 < α < 0.6 are designated as Transported Anthropogenic Dust (TDU), which is mainly dominated by dust aerosol and might mix with other anthropogenic aerosol types. Our results reveal that the primary components of high AOD days are predominantly dust over East and Central Asian regions, even if their variations rely on different sources, distance from the source, emission mechanisms, and meteorological characteristics. The overall mean and standard deviation of single-scattering albedo, asymmetry factor, real part and imaginary part of complex refractive index at 550 nm for Asian PDU are 0.935 ± 0.014, 0.742 ± 0.008, 1.526 ± 0.029, and 0.00226 ± 0.00056, respectively, while corresponding values are 0.921 ± 0.021, 0.723 ± 0.009, 1.521 ± 0.025, and 0.00364 ± 0.0014 for Asian TDU. Aerosol shortwave direct radiative effects at the top of the atmosphere (TOA), at the surface (SFC), and in the atmospheric layer (ATM) for Asian PDU (α < 0.2) and TDU (0.2 < α < 0.6) computed in this study, are a factor of 2 smaller than the results of Optical Properties of Aerosols and Clouds (OPAC) mineral-accumulated (mineral-acc.) and mineral-transported (mineral-tran.) modes. Therefore, we are convinced that our results hold promise for updating and improving accuracies of Asian dust characteristics in present-day remote sensing applications and regional or global climate models.

Structural and Functional Characterization of a Short-Chain Flavodoxin Associated with a Noncanonical 1,2-Propanediol Utilization Bacterial Microcompartment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Plegaria, Jefferson S.; Sutter, Markus; Ferlez, Bryan

Bacterial microcompartments (BMCs) are proteinaceous organelles that encapsulate enzymes involved in CO2 fixation (carboxysomes). or carbon catabolism (metabolosomes). Metabolosomes share a common core of enzymes and a distinct signature enzyme for substrate degradation that defines the function of the BMC (e,g., propanediol or ethanolamine utilization BMCs, or glycyl-radical enzyme microcompartments). Loci encoding metabolosomes also typically contain genes for proteins that support organelle function, such as regulation, transport of substrate, and cofactor (e.g., vitamin B-12) synthesis and recycling. Flavoproteins are frequently among these ancillary gene products, suggesting that these redox active proteins play an undetermined function in many metabolosomes. Here, wemore » report the first characterization of a BMC-associated flavodoxin (Fld1C), a small flavoprotein, derived from the noncanonical 1,2-propanediol utilization BMC locus (PDU1C) of Lactobacillus reuteri. The 2.0 angstrom X-ray structure of Fld1C displays the alpha/beta flavodoxin fold, which noncovalently binds a single flavin mononucleotide molecule. Fld1C is a short-chain flavodoxin with redox potentials of -240 +/- 3 mV oxidized/semiquinone and -344 +/- 1 mV semiquinone/hydroquinone versus the standard hydrogen electrode at pH 7.5. It can participate in an electron transfer reaction with a photoreductant to form a stable semiquinone species. Collectively, our structural and functional results suggest that PDU1C BMCs encapsulate Fld1C to store and transfer electrons for the reactivation and/or recycling of the B-12 cofactor utilized by the signature enzyme.« less

Psycho-biological correlates of free-floating anxiety symptoms in male patients with sexual dysfunctions.

PubMed

Corona, Giovanni; Mannucci, Edoardo; Petrone, Luisa; Ricca, Valdo; Balercia, Giancarlo; Giommi, Roberta; Forti, Gianni; Maggi, Mario

2006-01-01

Anxiety has a relevant impact on everyday life, including sexual life, and therefore is considered the final common pathway by which social, psychological, and biological stressors negatively affect sexual functioning. The aim of this study is to define the psycho-biological correlates of free-floating anxiety in a large sample of patients complaining of erectile dysfunction (ED)-based sexual problems. We studied a consecutive series of 882 ED patients using SIEDY, a 13-item structured interview, composed of 3 scales that identify and quantify organic, relational, and intrapsychic domains. MHQ-A scoring from Middlesex Hospital Questionnaire (MHQ) was used as a putative marker of free-floating anxiety symptoms (AS). Metabolic and hormonal parameters, nocturnal penile tumescence (NPT) test, and penile Doppler ultrasound (PDU) examination were also performed. MHQ-A score was significantly higher in patients complaining of difficulties in maintaining erection and in those reporting premature ejaculation (6.5 +/- 3.3 vs 5.8 +/- 3.3 and 6.6 +/- 3.3 vs 6.1 +/- 3.3, respectively; both P < .05). Moreover, ASs were significantly correlated to life stressors quantified by SIEDY scale 2 (relational component) and scale 3 (intrapsychic component) scores, as dissatisfaction at work or within the family or couple relationships. Among physical, biochemical, or instrumental parameters tested, only end-diastolic velocity at PDU was significantly (P < .05) related to ASs. In conclusion, in patients with ED-based sexual problems, ASs are correlated to many relational and life stressors. Conversely, organic problems are not necessarily associated with MHQ-A score.

Health effects research in direct coal liquefaction. Studies of H-coal distillates: Phase I. PDU samples - the effects of hydrotreatment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Epler, J.L.; Fry, R.J.M.; Larimer, F.W.

1981-11-01

A multi-divisional effort aimed at the integrated assessment of the health and environmental effects of various coal conversion and shale oil technologies is being carried out. The feasibility of using health effects bioassays to predict the potential biohazard of various H-Coal derived test materials is examined in a coupled chemical and biological approach. The primary focus of the research is the use of preliminary chemical characterizations and preparation for bioassay, followed by testing in short-term assays in order to rapidly ascertain the potential biohazard. Mammalian toxicological assays parallel the testing. Raw and hydrotreated product liquids from process development units ofmore » H-Coal and the pilot plant solvent refined coal process were examined for acute toxicity monitored as population growth impairment of Tetrahymena exposed to aqueous extracts and for mutagenic activity monitored as revertants of Salmonella exposed to metabolically activated chemical class fractions. Medium to high severity hydrotreatment appears to be an effective means of reducing biological activity, presumably by reducing the aromaticity and heteroatom content. Five basic mammalian, acute toxicity tests have been conducted with selected H-coal samples and shale oil derivatives. The data show that H-Coal samples are moderately toxic whereas the toxicity of shale oil derived products is slight and comparable to samples obtained from naturally occurring petroleums. No overt skin or eye toxicity was found. The present data reveal that coal-derived distillates generated by the H-coal process are highly carcinogenic to mouse skin. An extreme form of neurotoxicity associated with dermal exposure to one of the lighter, minimally carcinogenic, materials was noted. (DMC)« less

Design and Demonstration of a Miniature Lidar System for Rover Applications

NASA Technical Reports Server (NTRS)

Robinson, Benjamin

2010-01-01

A basic small and portable lidar system for rover applications has been designed. It uses a 20 Hz Nd:YAG pulsed laser, a 4-inch diameter telescope receiver, a custom-built power distribution unit (PDU), and a custom-built 532 nm photomultiplier tube (PMT) to measure the lidar signal. The receiving optics have been designed, but not constructed yet. LabVIEW and MATLAB programs have also been written to control the system, acquire data, and analyze data. The proposed system design, along with some measurements, is described. Future work to be completed is also discussed.

Correlation between computerised findings and Newman's scaling on vascularity using power Doppler ultrasonography imaging and its predictive value in patients with plantar fasciitis

PubMed Central

Chen, H; Ho, H M; Ying, M; Fu, S N

2012-01-01

Objectives The purpose of this study was to correlate findings on small vessel vascularity between computerised findings and Newman's scaling using power Doppler ultrasonography (PDU) imaging and its predictive value in patients with plantar fasciitis. Methods PDU was performed on 44 patients (age range 30–66 years; mean age 48 years) with plantar fasciitis and 46 healthy subjects (age range 18–61 years; mean age 36 years). The vascularity was quantified using ultrasound images by a customised software program and graded by Newman's grading scale. Vascular index (VI) was calculated from the software program as the ratio of the number of colour pixels to the total number of pixels within a standardised selected area of proximal plantar fascia. The 46 healthy subjects were examined on 2 occasions 7–10 days apart, and 18 of them were assessed by 2 examiners. Statistical analyses were performed using intraclass correlation coefficient and linear regression analysis. Results Good correlation was found between the averaged VI ratios and Newman's qualitative scale (ρ = 0.70; p<0.001). Intratester and intertester reliability were 0.89 and 0.61, respectively. Furthermore, higher VI was correlated with less reduction in pain after physiotherapeutic intervention. Conclusions The computerised VI not only has a high level of concordance with the Newman grading scale but is also reliable in reflecting the vascularity of proximal plantar fascia, and can predict pain reduction after intervention. This index can be used to characterise the changes in vascularity of patients with plantar fasciitis, and it may also be helpful for evaluating treatment and monitoring the progress after intervention in future studies. PMID:22167513

Autoeroticism, mental health, and organic disturbances in patients with erectile dysfunction.

PubMed

Corona, Giovanni; Ricca, Valdo; Boddi, Valentina; Bandini, Elisa; Lotti, Francesco; Fisher, Alessandra D; Sforza, Alessandra; Forti, Gianni; Mannucci, Edoardo; Maggi, Mario

2010-01-01

Masturbation is a common, but often neglected, male sexual behavior. To investigate the psychobiological correlates of self-reported masturbation in the last 3 months. A consecutive series of 2,786 heterosexual male patients (mean age 48.4 +/- 13.2) consulting an outpatient clinic for erectile dysfunction (ED) was studied. Several hormonal, biochemical and instrumental parameters (penile Doppler ultrasound [PDU]) were investigated. Patients were interviewed, prior to the beginning of any treatment, with Structured Interview on Erectile Dysfunction (SIEDY) and ANDROTEST structured interviews. They also completed the Middlesex Hospital Questionnaire, a brief self-reported questionnaire for the screening of the symptoms of mental disorders in a nonpsychiatric setting. Among the patients studied, 1,781 (61.9%) reported they had masturbated at least once per month in the preceding 3 months. The frequency of masturbation was inversely related to age (r = -0.329; P < 0.0001) and directly associated with education level (adj r = 0.052, P < 0.05 after adjustment for age). A feeling of guilt during masturbation was reported by 274 (15.4%) patients. After adjusting for age, masturbation was positively associated with testosterone levels, stressful conditions, and both unstable and long-lasting couple relationship. Urogenital problems such as varicocele and prostate abnormalities also increased the chance of masturbation. Reported guiltiness during autoeroticism was associated with psychological disturbances, low prolactin, low testosterone, and increased relational problems. An erection not normal during masturbation was declared by 1,361 (76.4%) patients and associated with a prevalent organic component of ED, because of lower peak systolic velocity PDU and higher SIEDY Scale 1 scores. This study indicates that masturbation is a relatively frequent behavior in male subjects with ED. Inquiring about this sexual behavior is an important issue for understanding overall patients' sexual attitudes and behavior.

Clinical, functional and radiological results of Achilles tenorraphy surgically treated with mini-open technique.

PubMed

Vadalà, A; De Carli, A; Vulpiani, M C; Iorio, R; Vetrano, M; Scapellato, S; Suarez, T; Di Salvo, F; Ferretti, A

2012-12-01

The aim of this paper was to report clinical, functional and radiological results of 80 patients surgically treated with a combined mini-open and percutaneous surgical repair as proposed by Kakiuchi. All patients were evaluated with a physical examination, evaluation scales, a functional test (Ergo-jump Bosco System), and an ultrasonographic exam along with Power Doppler Ultrasonography (PDU) (S/S). At a mean follow-up of 58 months no cases of rerupture were detected. VISA-A evaluation scale showed an excellent score in 63 patients (78.75%), a good score in 14 patients (17.5%), a fair score in two patients (2.5%), and a poor score in one patient (1.25%). Hannover scale showed an excellent score in 63 patients (78.75%), and a good score in 17 patients (21.25%). Ergo-Jump evaluation showed a 2.07% mean deficit of the affected limb at the Squatting Jump test, a 3.26% mean deficit at the Counter Movement Jump test, and a 0.0062% mean improvement at the Repetitive Jump test. Ultrasonographic exam showed in all cases a satisfactory recovery of the integrity of the operated tendon. The mean AP and LL widths showed a significant increase of 7.13±2.97 mm (+56.1%) and of 4.01±2.36 mm (+43.81%) respectively. According to the modified Öhberg score scale, PDU exam showed a grade +1 in 16 patients (20%) and a grade +2 in seven cases (8.7%). The absence of rerupture cases, the satisfactory functional and ultrasonographic results of the patients included in this study cause us to consider this technique as reliable and effective even in young high-demand patients.

Distributed Interactive Simulation Protocol Extensions

DTIC Science & Technology

1993-05-28

company HQ. The OrgName and Type Code for a unit will be reported in the Notion or Perception I PDU( s ) for that unit. Any unit in a player’s Task Org...this order. The U.I. can have a mapping of that unique ID to some user entered ID if desired. Reference - No map reference is needed, the map( s ...Common (232):I Si. 0) 0xre~t 4 f ne0 W .bti ISM07 GUITI Unw.evwd (131 5u.on e4 ffifldedl) C L~cu S .an e p e a m (1 ) 1 A ~ w 2 O GS iI U~WW 2 - P S 54

Design and construction of coal/biomass to liquids (CBTL) process development unit (PDU) at the University of Kentucky Center for Applied Energy Research (CAER)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Placido, Andrew; Liu, Kunlei; Challman, Don

This report describes a first phase of a project to design, construct and commission an integrated coal/biomass-to-liquids facility at a capacity of 1 bbl. /day at the University of Kentucky Center for Applied Energy Research (UK-CAER) – specifically for construction of the building and upstream process units for feed handling, gasification, and gas cleaning, conditioning and compression. The deliverables from the operation of this pilot plant [when fully equipped with the downstream process units] will be firstly the liquid FT products and finished fuels which are of interest to UK-CAER’s academic, government and industrial research partners. The facility will producemore » research quantities of FT liquids and finished fuels for subsequent Fuel Quality Testing, Performance and Acceptability. Moreover, the facility is expected to be employed for a range of research and investigations related to: Feed Preparation, Characteristics and Quality; Coal and Biomass Gasification; Gas Clean-up/ Conditioning; Gas Conversion by FT Synthesis; Product Work-up and Refining; Systems Analysis and Integration; and Scale-up and Demonstration. Environmental Considerations - particularly how to manage and reduce carbon dioxide emissions from CBTL facilities and from use of the fuels - will be a primary research objectives. Such a facility has required significant lead time for environmental review, architectural/building construction, and EPC services. UK, with DOE support, has advanced the facility in several important ways. These include: a formal EA/FONSI, and permits and approvals; construction of a building; selection of a range of technologies and vendors; and completion of the upstream process units. The results of this project are the FEED and detailed engineering studies, the alternate configurations and the as-built plant - its equipment and capabilities for future research and demonstration and its adaptability for re-purposing to meet other needs. These are described in some detail in this report, along with lessons learned.« less

The Meteosat Second Generation (MSG) power system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Haines, J.E.; Levins, D.; Robben, A.

1997-12-31

Under the direction of the European Meteorological Satellite Organization (EUMETSAT) and the European Space Agency (ESA), space industries within Europe are in the process of developing a new series of larger and more performant geostationary weather satellites. The initial three spacecraft within this new series, which are known by the name of Meteosat Second Generation (MSG), are due to be progressively launched from the year 2000 onwards. The major objective of this mission is the continuation of the European weather watch and space borne atmospheric sensing services provided by the present series of Meteosat spacecraft. To satisfy this mission requirement,more » the payload compliment to be supported by MSG will consist of a comprehensive earth viewing instrument capable of operating in both the infra-red and visible spectrum, an earth radiation measurement system and a search and rescue facility. In furnishing the power needs for these payloads, the power generating element on the spin stabilized MSG spacecraft consists of a body mounted solar array, capable of providing 628 watts of electrical power at the end of seven years of geosynchronous orbital lifetime. The energy storage elements for the spacecraft consists of two, 29 ampere-hour batteries, while centralized power management is achieved by the Power Control Unit (PCU), which satisfies the payload and battery re-charge demands by controlling the available solar array power. Power distribution for the spacecraft electrical loads and heaters is achieved by the Power Distribution Unit (PDU) and for the pyrotechnic devices by the Pyrotechnic Release Unit.« less

An intelligent remote control system for ECEI on EAST

NASA Astrophysics Data System (ADS)

Chen, Dongxu; Zhu, Yilun; Zhao, Zhenling; Qu, Chengming; Liao, Wang; Xie, Jinlin; Liu, Wandong

2017-08-01

An intelligent remote control system based on a power distribution unit (PDU) and Arduino has been designed for the electron cyclotron emission imaging (ECEI) system on Experimental Advanced Superconducting Tokamak (EAST). This intelligent system has three major functions: ECEI system reboot, measurement region adjustment and signal amplitude optimization. The observation region of ECEI can be modified for different physics proposals by remotely tuning the optical and electronics systems. Via the remote adjustment of the attenuation level, the ECEI intermediate frequency signal amplitude can be efficiently optimized. The remote control system provides a feasible and reliable solution for the improvement of signal quality and the efficiency of the ECEI diagnostic system, which is also valuable for other diagnostic systems.

Factors associated with syphilis seroreactivity among polydrug users in Northeast Brazil: A cross-sectional study using Respondent Driven Sampling.

PubMed

Baptista, Cremildo João; Dourado, Ines; Brignol, Sandra; Andrade, Tarcísio de Matos; Bastos, Francisco Inácio

2017-01-01

The burden of sexually transmitted infections (STIs), such as syphilis, is higher in low-income countries, with serious consequences and profound impact on sexual and reproductive health and human immunodeficiency virus (HIV) spread. Syphilis prevalence tend to be higher among people who misuse drugs than in the general population. To assess syphilis and associated factors among polydrug users (PDU) in the city of Salvador, Northeast Brazil. A cross-sectional study was conducted in 10 Brazilian cities between September and November 2009 using Respondent Driven Sampling (RDS). Participants answered an Audio Computer-Assisted Self Interview (ACASI) and were rapid tested for HIV and syphilis. We performed multivariable regression models for correlates of syphilis on Stata 10.0. Estimates were weighted by the inverse size of the individual social network size and homophily. Mean age was 29.3 years (range: 18-62), 74.0% were males, and 89.8% were non-white. Syphilis prevalence was 16.6%. Females (adjwOR:2.14; 95%CI:1.09-4.20), individuals over 29 years old (adjwOR:4.44; 95%CI:2.41-8.19), those who exchanged sex for money or drugs (adjwOR:3.51; 95%CI:1.84-6.71), "No/low" self-perceived risk of HIV infection (adjwOR:5.13; 95%CI:1.36-19.37), and having nine or less years of education (adjwOR:2.92; 95%CI:1.08-7.88) were associated with syphilis. One of the most pressing needs for syphilis prevention/control is the availability of rapid point-of-care diagnostic tests and treatment. Interventions should be tailored to PDU needs and their multiple burdens as shown in the present study, that may contribute to future studies aiming to better understand the relationships between drug use and syphilis. Copyright © 2016 Elsevier B.V. All rights reserved.

Plasmid Stability in Dried Cells of the Desert Cyanobacterium Chroococcidiopsis and its Potential for GFP Imaging of Survivors on Earth and in Space

NASA Astrophysics Data System (ADS)

Billi, Daniela

2012-06-01

Two GFP-based plasmids, namely pTTQ18-GFP-pDU1mini and pDUCA7-GFP, of about 7 kbp and 15 kbp respectively, able to replicate in Chroococcidiopsis sp. CCMEE 029 and CCMEE 123, were developed. Both plasmids were maintained in Chroococcidiopsis cells after 18 months of dry storage as demonstrated by colony PCR, plasmid restriction analysis, GFP imaging and colony-forming ability under selection of dried transformants; thus suggesting that strategies employed by this cyanobacterium to stabilize dried chromosomal DNA, must have protected plasmid DNA. The suitability of pDU1mini-plasmid for GFP tagging in Chroococcidiopsis was investigated by using the RecA homolog of Synechocystis sp. PCC 6803. After 2 months of dry storage, the presence of dried cells with a GFP-RecASyn distribution resembling that of hydrated cells, supported its capability of preventing desiccation-induced genome damage, whereas the rewetted cells with filamentous GFP-RecASyn structures revealed sub-lethal DNA damage. The long-term stability of plasmid DNA in dried Chroococcidiopsis has implication for space research, for example when investigating the recovery of dried cells after Martian and space simulations or when developing life support systems based on phototrophs with genetically enhanced stress tolerance and stored in the dry state for prolonged periods.

Plasmid stability in dried cells of the desert cyanobacterium Chroococcidiopsis and its potential for GFP imaging of survivors on Earth and in space.

PubMed

Billi, Daniela

2012-06-01

Two GFP-based plasmids, namely pTTQ18-GFP-pDU1(mini) and pDUCA7-GFP, of about 7 kbp and 15 kbp respectively, able to replicate in Chroococcidiopsis sp. CCMEE 029 and CCMEE 123, were developed. Both plasmids were maintained in Chroococcidiopsis cells after 18 months of dry storage as demonstrated by colony PCR, plasmid restriction analysis, GFP imaging and colony-forming ability under selection of dried transformants; thus suggesting that strategies employed by this cyanobacterium to stabilize dried chromosomal DNA, must have protected plasmid DNA. The suitability of pDU1(mini)-plasmid for GFP tagging in Chroococcidiopsis was investigated by using the RecA homolog of Synechocystis sp. PCC 6803. After 2 months of dry storage, the presence of dried cells with a GFP-RecA(Syn) distribution resembling that of hydrated cells, supported its capability of preventing desiccation-induced genome damage, whereas the rewetted cells with filamentous GFP-RecA(Syn) structures revealed sub-lethal DNA damage. The long-term stability of plasmid DNA in dried Chroococcidiopsis has implication for space research, for example when investigating the recovery of dried cells after Martian and space simulations or when developing life support systems based on phototrophs with genetically enhanced stress tolerance and stored in the dry state for prolonged periods.

Independent Orbiter Assessment (IOA): Analysis of the body flap subsystem

NASA Technical Reports Server (NTRS)

Wilson, R. E.; Riccio, J. R.

1986-01-01

The results of the Independent Orbiter Assessment (IOA) of the Failure Modes and Effects Analysis (FMEA) and Critical Items List (CIL) are presented. The IOA approach features a top-down analysis of the hardware to determine failure modes, criticality, and potential critical items (PCIs). To preserve independence, this analysis was accomplished without reliance upon the results contained within the NASA FMEA/CIL documentation. The independent analysis results for the Orbiter Body Flap (BF) subsystem hardware are documented. The BF is a large aerosurface located at the trailing edge of the lower aft fuselage of the Orbiter. The proper function of the BF is essential during the dynamic flight phases of ascent and entry. During the ascent phase of flight, the BF trails in a fixed position. For entry, the BF provides elevon load relief, trim control, and acts as a heat shield for the main engines. Specifically, the BF hardware comprises the following components: Power Drive Unit (PDU), rotary actuators, and torque tubes. The IOA analysis process utilized available BF hardware drawings and schematics for defining hardware assemblies, components, and hardware items. Each level of hardware was evaluated and analyzed for possible failure modes and effects. Criticality was assigned based upon the severity of the effect for each failure mode. Of the 35 failure modes analyzed, 19 were determined to be PCIs.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wen, Haiming; van Rooyen, Isabella J.

Here, detailed electron microscopy studies were performed to investigate the distribution and composition of fission products in the SiC layer of a tristructural isotropic coated particle exhibiting localized corrosion. Previous studies on this particle indicated that pure carbon areas in the SiC layer, resulting from localized corrosion of SiC by Pd, provide pathways for Ag, Cd and Cs migration. This study reveals the presence of Ag- and/or Cd-containing precipitates in un-corroded SiC areas. Ag/Cd may exist by themselves or coexist with Pd. Ag/Cd mainly transport along SiC grain boundaries. An Ag-Pd-Cd precipitate was identified at a stacking fault inside amore » SiC grain, suggesting that intragranular transport of Ag/Cd is possible. Ce is present with Pd or Pd-U in some precipitates >50 nm. U and Ce frequently coexist with each other, whereas Ag/Cd usually does not coexist with U or Ce. No Cs was detected in any precipitates in the areas examined.« less

Phylogenetic distribution of three pathways for propionate production within the human gut microbiota

PubMed Central

Reichardt, Nicole; Duncan, Sylvia H; Young, Pauline; Belenguer, Alvaro; McWilliam Leitch, Carol; Scott, Karen P; Flint, Harry J; Louis, Petra

2014-01-01

Propionate is produced in the human large intestine by microbial fermentation and may help maintain human health. We have examined the distribution of three different pathways used by bacteria for propionate formation using genomic and metagenomic analysis of the human gut microbiota and by designing degenerate primer sets for the detection of diagnostic genes for these pathways. Degenerate primers for the acrylate pathway (detecting the lcdA gene, encoding lactoyl-CoA dehydratase) together with metagenomic mining revealed that this pathway is restricted to only a few human colonic species within the Lachnospiraceae and Negativicutes. The operation of this pathway for lactate utilisation in Coprococcus catus (Lachnospiraceae) was confirmed using stable isotope labelling. The propanediol pathway that processes deoxy sugars such as fucose and rhamnose was more abundant within the Lachnospiraceae (based on the pduP gene, which encodes propionaldehyde dehydrogenase), occurring in relatives of Ruminococcus obeum and in Roseburia inulinivorans. The dominant source of propionate from hexose sugars, however, was concluded to be the succinate pathway, as indicated by the widespread distribution of the mmdA gene that encodes methylmalonyl-CoA decarboxylase in the Bacteroidetes and in many Negativicutes. In general, the capacity to produce propionate or butyrate from hexose sugars resided in different species, although two species of Lachnospiraceae (C. catus and R. inulinivorans) are now known to be able to switch from butyrate to propionate production on different substrates. A better understanding of the microbial ecology of short-chain fatty acid formation may allow modulation of propionate formation by the human gut microbiota. PMID:24553467

Health care of pregnant women with diabetes in Spain: Approach using a questionnaire.

PubMed

Rubio, José Antonio; Ontañón, Marta; Perea, Verónica; Megia, Ana

2016-03-01

To ascertain how health care for pregnant women with gestational diabetes (GD) and pregestational diabetes (PGD) is organized, and to estimate the number of Pregnancy and Diabetes Units (PDUs) in Spain in 2013. The Spanish Group of Diabetes and Pregnancy (GEDE) developed and agreed on a questionnaire based on the recommendations of the group. The questionnaire was sent to members of the Spanish Society of Diabetes and the Spanish Society of Endocrinology and Nutrition. Eighty-seven questionnaires were received from 81 hospitals, 4 outpatient specialty centers, and 2 primary healthcare centers, which accounted for 51% of the Spanish population and for 39% of births in 2013. GD was mainly diagnosed based on GEDE recommendations (98%), and less than 50% of women were reevaluated after delivery in primary care. Fourteen (26%) of the 53 centers identified as PDUs corresponded to a minimal model. Continuous subcutaneous insulin infusion (CSII) therapy was not available in 30% of centers, and 13% of hospitals had no preconceptional clinics. No nurse support was available in 20% of centers. Care of women with PGD has a fair coverage with PDU, but significant deficits still exist, for instance, in preconception clinic and CSII. However, organization of care for women with GD appears to be adequate. There are aspects in need of improvement such as integration of diabetes educators and coordination with primary care for postpartum reclassification. Copyright © 2015 SEEN. Published by Elsevier España, S.L.U. All rights reserved.

Complex multiple antibiotic and mercury resistance region derived from the r-det of NR1 (R100).

PubMed

Partridge, Sally R; Hall, Ruth M

2004-11-01

The sequence of the 45.2-kb multidrug and mercury resistance region of pRMH760, a large plasmid from a clinical isolate of Klebsiella pneumoniae collected in 1997 in Australia, was completed. Most of the modules found in the resistance determinant (r-det), or Tn2670, region of NR1 (also known as R100), isolated from a Shigella flexneri strain in Japan in the late 1950s, were present in pRMH760 but in a different configuration. The location was also different, with the Tn2670-derived region flanked by the transposition module of Tn1696 and a mercury resistance module almost identical to one found in the plasmid pDU1358. This arrangement is consistent with a three-step process. First, the r-det was circularized via homologous recombination between the IS1 elements and reincorporated at a new location, possibly in a different plasmid, via homologous recombination between the 5'-conserved (5'-CS) or 3'-CS of the In34 integron in the r-det and the same region of a second class 1 integron in a Tn1696 relative. Subsequently, resolvase-mediated recombination between the res sites in the r-det and a second mercury resistance transposon removed one end of the Tn1696-like transposon and part of the second transposon. Other events occurring within the r-det-derived portion have also contributed to the formation of the pRMH760 resistance region. Tn2 or a close relative that includes the bla(TEM-1b) gene had moved into the Tn21 mercury resistance module with subsequent deletion of the adjacent sequence, and all four 38-bp inverted repeats corresponding to Tn21 family transposon termini have been interrupted by an IS4321-like element.

Distribution of fission products palladium, silver, cerium and cesium in the un-corroded areas of the locally corroded SiC layer of a neutron irradiated TRISO fuel particle

DOE PAGES

Wen, Haiming; van Rooyen, Isabella J.

2017-04-14

Here, detailed electron microscopy studies were performed to investigate the distribution and composition of fission products in the SiC layer of a tristructural isotropic coated particle exhibiting localized corrosion. Previous studies on this particle indicated that pure carbon areas in the SiC layer, resulting from localized corrosion of SiC by Pd, provide pathways for Ag, Cd and Cs migration. This study reveals the presence of Ag- and/or Cd-containing precipitates in un-corroded SiC areas. Ag/Cd may exist by themselves or coexist with Pd. Ag/Cd mainly transport along SiC grain boundaries. An Ag-Pd-Cd precipitate was identified at a stacking fault inside amore » SiC grain, suggesting that intragranular transport of Ag/Cd is possible. Ce is present with Pd or Pd-U in some precipitates >50 nm. U and Ce frequently coexist with each other, whereas Ag/Cd usually does not coexist with U or Ce. No Cs was detected in any precipitates in the areas examined.« less

Two Axis Pointing System (TAPS) attitude acquisition, determination, and control

NASA Technical Reports Server (NTRS)

Azzolini, John D.; Mcglew, David E.

1990-01-01

The Two Axis Pointing System (TAPS) is a 2 axis gimbal system designed to provide fine pointing of Space Transportation System (STS) borne instruments. It features center-of-mass instrument mounting and will accommodate instruments of up to 1134 kg (2500 pounds) which fit within a 1.0 by 1.0 by 4.2 meter (40 by 40 by 166 inch) envelope. The TAPS system is controlled by a microcomputer based Control Electronics Assembly (CEA), a Power Distribution Unit (PDU), and a Servo Control Unit (SCU). A DRIRU-II inertial reference unit is used to provide incremental angles for attitude propagation. A Ball Brothers STRAP star tracker is used for attitude acquisition and update. The theory of the TAPS attitude determination and error computation for the Broad Band X-ray Telescope (BBXRT) are described. The attitude acquisition is based upon a 2 star geometric solution. The acquisition theory and quaternion algebra are presented. The attitude control combines classical position, integral and derivative (PID) control with techniques to compensate for coulomb friction (bias torque) and the cable harness crossing the gimbals (spring torque). Also presented is a technique for an adaptive bias torque compensation which adjusts to an ever changing frictional torque environment. The control stability margins are detailed, with the predicted pointing performance, based upon simulation studies. The TAPS user interface, which provides high level operations commands to facilitate science observations, is outlined.

Influence of SiC grain boundary character on fission product transport in irradiated TRISO fuel

DOE PAGES

Lillo, T. M.; Rooyen, I. J.

2016-02-26

The relationship between grain boundary character and fission product migration is identified as an important knowledge gap in order to advance the understanding of fission product release from TRISO fuel particles. Precession electron diffraction (PED), a TEM-based technique, was used in this study to quickly and efficiently provide the crystallographic information needed to identify grain boundary misorientation, grain boundary type (low or high angle) and whether the boundary is coincident site lattice (CSL) – related, in irradiated SiC. Analysis of PED data showed the grain structure of the SiC layer in an irradiated TRISO fuel particle from the AGR-1 experimentmore » to be composed mainly of twin boundaries with a small fraction of low angle grain boundaries (<10%). In general, fission products favor precipitation on random, high angle grain boundaries but can precipitate out on low angle and CSL-related grain boundaries to a limited degree. Pd is capable of precipitating out on all types of grain boundaries but most prominently on random, high angle grain boundaries. Pd-U and Pd-Ag precipitates were found on CSL-related as well as random high angle grain boundaries but not on low angle grain boundaries. In contrast, precipitates containing only Ag were found only on random, high angle grain boundaries but not on either low angle or CSL-related grain boundaries.« less

Influence of SiC grain boundary character on fission product transport in irradiated TRISO fuel

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lillo, T. M.; Rooyen, I. J.

The relationship between grain boundary character and fission product migration is identified as an important knowledge gap in order to advance the understanding of fission product release from TRISO fuel particles. Precession electron diffraction (PED), a TEM-based technique, was used in this study to quickly and efficiently provide the crystallographic information needed to identify grain boundary misorientation, grain boundary type (low or high angle) and whether the boundary is coincident site lattice (CSL) – related, in irradiated SiC. Analysis of PED data showed the grain structure of the SiC layer in an irradiated TRISO fuel particle from the AGR-1 experimentmore » to be composed mainly of twin boundaries with a small fraction of low angle grain boundaries (<10%). In general, fission products favor precipitation on random, high angle grain boundaries but can precipitate out on low angle and CSL-related grain boundaries to a limited degree. Pd is capable of precipitating out on all types of grain boundaries but most prominently on random, high angle grain boundaries. Pd-U and Pd-Ag precipitates were found on CSL-related as well as random high angle grain boundaries but not on low angle grain boundaries. In contrast, precipitates containing only Ag were found only on random, high angle grain boundaries but not on either low angle or CSL-related grain boundaries.« less

Coordinate Intracellular Expression of Salmonella Genes Induced during Infection

PubMed Central

Heithoff, Douglas M.; Conner, Christopher P.; Hentschel, Ute; Govantes, Fernando; Hanna, Philip C.; Mahan, Michael J.

1999-01-01

Salmonella typhimurium in vivo-induced (ivi) genes were grouped by their coordinate behavior in response to a wide variety of environmental and genetic signals, including pH, Mg2+, Fe2+, and PhoPQ. All of the seven ivi fusions that are induced by both low pH and low Mg2+ (e.g., iviVI-A) are activated by the PhoPQ regulatory system. Iron-responsive ivi fusions include those induced under iron limitation (e.g., entF) as well as one induced by iron excess but only in the absence of PhoP (pdu). Intracellular expression studies showed that each of the pH- and Mg2+-responsive fusions is induced upon entry into and growth within three distinct mammalian cell lines: RAW 264.7 murine macrophages and two cultured human epithelial cell lines: HEp-2 and Henle-407. Each ivi fusion has a characteristic level of induction consistent within all three cell types, suggesting that this class of coordinately expressed ivi genes responds to general intracellular signals that are present both in initial and in progressive stages of infection and may reflect their responses to similar vacuolar microenvironments in these cell types. Investigation of ivi expression patterns reveals not only the inherent versatility of pathogens to express a given gene(s) at various host sites but also the ability to modify their expression within the context of different animal hosts, tissues, cell types, or subcellular compartments. PMID:9922242

Exploring optimization parameters to increase ssDNA recombineering in Lactococcus lactis and Lactobacillus reuteri

PubMed Central

van Pijkeren, Jan-Peter; Neoh, Kar Mun; Sirias, Denise; Findley, Anthony S.; Britton, Robert A.

2012-01-01

Single-stranded DNA (ssDNA) recombineering is a technology which is used to make subtle changes in the chromosome of several bacterial genera. Cells which express a single-stranded DNA binding protein (RecT or Bet) are transformed with an oligonucleotide which is incorporated via an annealing and replication-dependent mechanism. By in silico analysis we identified ssDNA binding protein homologs in the genus Lactobacillus and Lactococcus lactis. To assess whether we could further improve the recombineering efficiency in Lactobacillus reuteri ATCC PTA 6475 we expressed several RecT homologs in this strain. RecT derived from Enterococcus faecalis CRMEN 19 yielded comparable efficiencies compared with a native RecT protein, but none of the other proteins further increased the recombineering efficiency. We successfully improved recombineering efficiency 10-fold in L. lactis by increasing oligonucleotide concentration combined with the use of oligonucleotides containing phosphorothioate-linkages (PTOs). Surprisingly, neither increased oligonucleotide concentration nor PTO linkages enhanced recombineering in L. reuteri 6475. To emphasize the utility of this technology in improving probiotic features we modified six bases in a transcriptional regulatory element region of the pdu-operon of L. reuteri 6475, yielding a 3-fold increase in the production of the antimicrobial compound reuterin. Directed genetic modification of lactic acid bacteria through ssDNA recombineering will simplify strain improvement in a way that, when mutating a single base, is genetically indistinguishable from strains obtained through directed evolution. PMID:22750793

Comparison of Clinical Profile between P. vivax and P. falciparum Malaria in Children: A Tertiary Care Centre Perspective from India.

PubMed

Goyal, Jagdish Prasad; Makwana, Aarti M

2014-01-01

Background. Malaria is a one of the leading causes of morbidity and mortality in tropical countries. Plasmodium vivax (P. vivax) is usually thought to be causing benign malaria with low incidence of complications as compared to Plasmodium falciparum (P. falciparum). Methods. This retrospective observational study included malaria patients who were admitted to K.T. Children Hospital and P.D.U. Government Medical College, Rajkot, a tertiary care teaching hospital, Gujarat, western India, during the period January 2012 to December 2012. Inclusion criteria were patients in whom either P. falciparum or P. vivax was positive on rapid malaria antigen test and peripheral blood smear. Patients showing mixed infections were excluded from study. Results. A total of 79 subjects (mean age 5.4 ± 3.6 years) were included in the study. It consisted of 47 P. vivax and 32 P. falciparum cases. The P. vivax cases consisted of 33 (70.2%) males and 11 (19.8%) females while P. falciparum cases consisted of 14 (43.8%) males and 18 (56.2%) females. One patient of each P. vivax and P. falciparum expired. There was no statistical significant difference found between complications such as anemia, thrombocytopenia, liver and renal dysfunction, ARDS, and cerebral malaria between P. vivax and P. falciparum. Conclusion. We conclude that P. vivax monoinfection tends to have as similar course and complications as compared to malaria due to P. falciparum monoinfection.

A novel type 1/2 hybrid IncC plasmid carrying fifteen antimicrobial resistance genes recovered from Proteus mirabilis in China.

PubMed

Lei, Chang-Wei; Kong, Ling-Han; Ma, Su-Zhen; Liu, Bi-Hui; Chen, Yan-Peng; Zhang, An-Yun; Wang, Hong-Ning

2017-09-01

IncC plasmids are of great concern as vehicles of broad-spectrum cephalosporins and carbapenems resistance genes bla CMY and bla NDM . The aim of this study was to sequence and characterize a multidrug resistance (MDR) IncC plasmid (pPm14C18) recovered from Proteus mirabilis. pPm14C18 was identified in a CMY-2-producing P. mirabilis isolate from chicken in China in 2014, and could be transferred to Escherichia coli conferring an MDR phenotype. Whole genome sequencing confirmed pPm14C18 was a novel type 1/2 hybrid IncC plasmid 165,992bp in size, containing fifteen antimicrobial resistance genes. It harboured a novel MDR mosaic region comprised of a hybrid Tn21 tnp -pDU mer , in which bla CTX-M-65 , dfrA32 and ereA were firstly reported in IncC plasmid. Phylogenetic relationship reconstruction based on the nucleotide sequences of the 52 IncC backbones showed all type 1 IncC plasmids were clustered into one clade, and then merged with pPm14C18 and finally with the type 2 IncC plasmids and another type 1/2 hybrid IncC plasmid pYR1. The MDR IncC plasmids in P. mirabilis of animal origin might threaten public health, which should be drawn more attention. Copyright © 2017 Elsevier Inc. All rights reserved.

Computer-generated scenes depicting the HST capture and EVA repair mission

NASA Image and Video Library

1993-11-12

Computer generated scenes depicting the Hubble Space Telescope capture and a sequence of planned events on the planned extravehicular activity (EVA). Scenes include the Remote Manipulator System (RMS) arm assisting two astronauts changing out the Wide Field/Planetary Camera (WF/PC) (48699); RMS arm assisting in the temporary mating of the orbiting telescope to the flight support system in Endeavour's cargo bay (48700); Endeavour's RMS arm assisting in the "capture" of the orbiting telescope (48701); Two astronauts changing out the telescope's coprocessor (48702); RMS arm assistign two astronauts replacing one of the telescope's electronic control units (48703); RMS assisting two astronauts replacing the fuse plugs on the telescope's Power Distribution Unit (PDU) (48704); The telescope's High Resolution Spectrograph (HRS) kit is depicted in this scene (48705); Two astronauts during the removal of the high speed photometer and the installation of the COSTAR instrument (48706); Two astronauts, standing on the RMS, during installation of one of the Magnetic Sensing System (MSS) (48707); High angle view of the orbiting Space Shuttle Endeavour with its cargo bay doors open, revealing the bay's pre-capture configuration. Seen are, from the left, the Solar Array Carrier, the ORU Carrier and the flight support system (48708); Two astronauts performing the replacement of HST's Rate Sensor Units (RSU) (48709); The RMS arm assisting two astronauts with the replacement of the telescope's solar array panels (48710); Two astronauts replacing the telescope's Solar Array Drive Electronics (SADE) (48711).

Pan-Genomic Approaches in Lactobacillus reuteri as a Porcine Probiotic: Investigation of Host Adaptation and Antipathogenic Activity.

PubMed

Lee, Jun-Yeong; Han, Geon Goo; Choi, Jaeyun; Jin, Gwi-Deuk; Kang, Sang-Kee; Chae, Byung Jo; Kim, Eun Bae; Choi, Yun-Jaie

2017-10-01

After the introduction of a ban on the use of antibiotic growth promoters (AGPs) for livestock, reuterin-producing Lactobacillus reuteri is getting attention as an alternative to AGPs. In this study, we investigated genetic features of L. reuteri associated with host specificity and antipathogenic effect. We isolated 104 L. reuteri strains from porcine feces, and 16 strains, composed of eight strains exhibiting the higher antipathogenic effect (group HS) and eight strains exhibiting the lower effect (group LS), were selected for genomic comparison. We generated draft genomes of the 16 isolates and investigated their pan-genome together with the 26 National Center for Biotechnology Information-registered genomes. L. reuteri genomes organized six clades with multi-locus sequence analysis, and the clade IV includes the 16 isolates. First, we identified six L. reuteri clade IV-specific genes including three hypothetical protein-coding genes. The three annotated genes encode transposases and cell surface proteins, indicating that these genes are the result of adaptation to the host gastrointestinal epithelia and that these host-specific traits were acquired by horizontal gene transfer. We also identified differences between groups HS and LS in the pdu-cbi-cob-hem gene cluster, which is essential for reuterin and cobalamin synthesis, and six genes specific to group HS are revealed. While the strains of group HS possessed all genes of this cluster, LS strains have lost many genes of the cluster. This study provides a deeper understanding of the relationship between probiotic properties and genomic features of L. reuteri.

Effect of atomizer scale and fluid properties on atomization mechanisms and spray characteristics

NASA Astrophysics Data System (ADS)

Waind, Travis

Atomization is chaos. The breakup of liquid structures by a gas encompasses such a wide range of possible configurations that a definitive mechanism describing breakup in any and all situations is an impossibility. However, when focus is applied, trends can be teased out of experimental data that seem to appropriately describe the action undertaken. These studies sought to better understand atomization, specifically coaxial, two-stream, airblast (or air-assist) atomization in which a central liquid jet is broken up by an annular, high-velocity gas stream. The studies enclosed focused on identifying the effect of changing the atomizer's scale on atomization. While most (but not all) atomization studies only focus on the resulting far-field drop diameters, these studies placed the focus largely on the intermediate structures, in the form of the intact liquid jet (ILJ), while also quantifying the resulting drop diameters. The location and shape of the ILJ constantly change, and on its surface, wavelengths were seen to form and grow, which have been correlated to the resulting drop diameters in previous studies. The studies enclosed herein are unique in that they attempt to apply and explain exiting mechanism-based breakup mechanisms to regimes, fluids, and geometry changes not yet evaluated in the literature. Existing correlations were compared to the experimental data for a range of atomizer geometries, and when they were found lacking, Buckingham-(Pi) theorem was used to develop new correlations for predicting behavior. Additionally, the method developed for the calculation of these parameters for other image sets is included, allowing for easy comparison and value verification. A small-scale, coaxial atomization system was used to atomize water and two silicone oils with air. The atomizers used in these studies had the same general geometry type, but had varying sizes, allowing for the effect of both scale and geometry to be evaluated. These studies quantified instability development and growth along with the resulting spray characteristics, allowing for correlations to be made between the two data sets as the more recent mechanism-based atomization models do. Existing mechanism-based models from the literature are compared to the experimental results, as these existing models have not been evaluated significantly with changing atomizer geometry, high-viscosity fluids, and high flow regimes as was done here. Additionally, two experimental campaigns were undertaken with atomizers used to operate the University of Utah's PDU-scale (process development unit) entrained flow gasifier. The first campaign showed the effect of gas velocity, atomizer load (total flow), and gas-liquid impingement angle on the qualitative cold-flow atomizer performance. These trends are then tied to behavior of the entrained flow gasifier, showing the existence of a minimum required degree of atomization to avoid substantial losses in fuel conversion and efficiency in a gasifier. The second campaign showed the effect of gas flow, liquid flow, and fluid on the quantitative cold-flow atomizer performance. While in the literature, changing fluid properties of Newtonian fluids are shown to have a relatively linear response on atomizer performance, the behavior of non-Newtonian fluids was shown to be much more complex and difficult to predict. The correlations developed for the small-scale atomizers are applied to the micro-hole atomizers and found to be erroneous for the change in atomizer geometry. Buckingham-(Pi) theorem is then used to develop correlations to predict the spray Sauter mean diameter for the micro-hole atomizers. Slurry-fed combustion and gasification systems are but one industrial implementation of atomization. Atomization plays important roles in numerous other industries, and despite decades of study, it is not well understood. This document serves to shed some light on a few small, specific subsets of the topic.

1,3-Propanediol dehydrogenases in Lactobacillus reuteri: impact on central metabolism and 3-hydroxypropionaldehyde production.

PubMed

Stevens, Marc J A; Vollenweider, Sabine; Meile, Leo; Lacroix, Christophe

2011-08-03

Lactobacillus reuteri metabolizes glycerol to 3-hydroxypropionaldehyde (3-HPA) and further to 1,3-propanediol (1,3-PDO), the latter step catalysed by a propanediol dehydrogenase (PDH). The last step in this pathway regenerates NAD+ and enables therefore the energetically more favourable production of acetate over ethanol during growth on glucose. A search throughout the genome of L. reuteri DSM 20016 revealed two putative PDHs encoded by ORFs lr_0030 and lr_1734. ORF lr_1734 is situated in the pdu operon encoding the glycerol conversion machinery and therefore likely involved in 1,3-PDO formation. ORF lr_0030 has not been associated with PDH-activity so far. To elucidate the role of these two PDHs, gene deletion mutant strains were constructed. Growth behaviour on glucose was comparable between the wild type and both mutant strains. However, on glucose + glycerol, the exponential growth rate of Δlr_0030 was lower compared to the wild type and the lr_1734 mutant. Furthermore, glycerol addition resulted in decreased ethanol production in the wild type and Δlr_1734, but not in Δlr_0030. PDH activity measurements using 3-HPA as a substrate revealed lower activity of Δlr_0030 extracts from exponential growing cells compared to wild type and Δlr_1734 extracts.During biotechnological 3-HPA production using non-growing cells, the ratio 3-HPA to 1,3-PDO was approximately 7 in the wild type and Δlr_0030, whereas this ratio was 12.5 in the mutant Δlr_1734. The enzyme encoded by lr_0030 plays a pivotal role in 3-HPA conversion in exponential growing L. reuteri cells. The enzyme encoded by lr_1734 is active during 3-HPA production by non-growing cells and this enzyme is a useful target to enhance 3-HPA production and minimize formation of the by-product 1,3-PDO.

Microvascular volume in symptomatic Achilles tendons is associated with VISA-A score.

PubMed

Praet, S F E; Ong, J H; Purdam, C; Welvaert, M; Lovell, G; Dixon, L; Gaida, J E; Anglim, J; Manzanero, S; Vlahovich, N; Hughes, D; Waddington, G

2018-05-15

The role of neovascularisation in tendinopathy is still poorly understood, potentially due to technical limitations of conventional power Doppler ultrasound. This study aimed to investigate the association between contrast-enhanced ultrasound (CEUS) microvascular volume (MV), Victorian Institute of Sports Assessment-Achilles (VISA-A) scores and intrinsic Achilles tendon tenderness, as well as two different Power Doppler modes. Cross-sectional study. 20 individuals with uni- or bilateral Achilles tendinopathy completed a VISA-A questionnaire, and underwent microvascular volume measurements of the Achilles tendon mid-portion using both conventional, ultrasensitive (SMI™) power Doppler ultrasound and CEUS. Intrinsic tendon tenderness was assessed with sensation detection threshold to extracorporeal shock waves (ESW). Linear Mixed Model analysis was used to determine the association between microvascular volume (MV), VISA-A, and ESW-detection threshold for both symptomatic and asymptomatic Achilles tendons. There was a significant association between VISA-A and MV (B=-5.3, 95%CI=[-8.5; -2.0], P=0.0004), and between MV and symptom duration (B=-1.7, 95%CI=[-3.2; -5.0], P=0.023). No significant associations were found between power Doppler ultrasound and CEUS-based MV or between CEUS-based MV and ESW-detection threshold. In comparison with conventional power Doppler ultrasound, SMI™ showed on average similar detection capacity for neovessels in the mid-portion of the Achilles tendon, whilst being superior for detecting neovessels within Kager's fat pad (t=3.46, 95%CI=[0.27; 1.03], P<0.005). Our results indicate that CEUS-based MV of the Achilles tendon is moderately associated with Achilles tendon symptoms. In accordance, CEUS-detected MV could be a novel target for treatment as it seems to be more sensitive than PDU and is correlated with symptoms. Copyright © 2018 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

Earth Observing System (EOS) Terra Spacecraft 120 Volt Power Subsystem: Requirements, Development and Implementation

NASA Technical Reports Server (NTRS)

Keys, Denney J.

2000-01-01

Built by the Lockheed-Martin Corporation, the Earth Observing System (EOS) TERRA spacecraft represents the first orbiting application of a 120 Vdc high voltage spacecraft electrical power system implemented by the National Aeronautics and Space Administration (NASA) Goddard Space Flight Center (GSFC). The EOS TERRA spacecraft's launch provided a major contribution to the NASA Mission to Planet Earth program while incorporating many state of the art electrical power system technologies to achieve its mission goals. The EOS TERRA spacecraft was designed around five state-of-the-art scientific instrument packages designed to monitor key parameters associated with the earth's climate. The development focus of the TERRA electrical power system (EPS) resulted from a need for high power distribution to the EOS TERRA spacecraft subsystems and instruments and minimizing mass and parasitic losses. Also important as a design goal of the EPS was maintaining tight regulation on voltage and achieving low conducted bus noise characteristics. This paper outlines the major requirements for the EPS as well as the resulting hardware implementation approach adopted to meet the demands of the EOS TERRA low earth orbit mission. The selected orbit, based on scientific needs, to achieve the EOS TERRA mission goals is a sun-synchronous circular 98.2degree inclination Low Earth Orbit (LEO) with a near circular average altitude of 705 kilometers. The nominal spacecraft orbit is approximately 99 minutes with an average eclipse period of about 34 minutes. The scientific goal of the selected orbit is to maintain a repeated 10:30 a.m. +/- 15 minute descending equatorial crossing which provides a fairly clear view of the earth's surface and relatively low cloud interference for the instrument observation measurements. The major EOS TERRA EPS design requirements are single fault tolerant, average orbit power delivery of 2, 530 watts with a defined minimum lifetime of five years (EOL). To meet these mission requirements, while minimizing mass and parasitic power losses, the EOS TERRA project relies on 36, 096 high efficiency Gallium Arsenide (GaAs) on Germanium solar cells adhered to a deployable flexible solar array designed to provide over 5,000 watts of power at EOL. To meet the eclipse power demands of the spacecraft, EOS TERRA selected an application of two 54-cell series connected Individual Pressure Vessel (IPV) Nickel-Hydrogen (NiH2) 50 Ampere-Hour batteries. All of the spacecraft observatory electrical power is controlled via the TERRA Power Distribution Unit (PDU) which is designed to provide main bus regulation of 120 Vdc +/- -4% at all load interfaces through the implementation of majority voter control of both the spacecraft's solar array sequential shunt unit (SSU) and the two battery bi-directional charge and discharge regulators. This paper will review the major electrical power system requirement drivers for the EOS TERRA mission as well as some of the challenges encountered during the development, testing, and implementation of the power system. In addition, spacecraft test and early on orbit performance results will also be covered.

'Everything contradicts in your mind': a qualitative study of experiences of forensic mental health staff in two contrasting services.

PubMed

Kurtz, Arabella; Jeffcote, Nikki

2011-10-01

 In the theoretical literature, there is growing recognition of the psychological impact on staff of working in challenging healthcare settings. In forensic mental health (FMH) services, powerful transference and counter-transference reactions in staff-patient relationships may emerge and may even play a role in contributing to incidents of malpractice, but there is little empirical research here.  The exploration of the experiences of FMH staff in two contrasting services.  Thirteen in-depth interviews were carried out with staff from a range of clinical disciplines in a mainstream National Health Service (NHS) medium secure unit (MSU), and 12 interviews were undertaken with such staff from a Personality Disorder Unit (PDU) in an MSU. All interview data were analysed independently using the grounded theory method. To synthesise the two separate analyses, a thematic analysis of both data sets was carried out, in which 'thematic units' were defined as significant points of comparison between the analyses of the two sets of interviews.  The combined analysis yielded six main themes under two main headings. Themes under the first heading Experience of the Clinical Task were: 'difficulty in achieving task integration'; 'motivation to build relationships, work through difficulty and bring about change'; and 'minimal sense of risk and anxiety at the centre'. Themes under the second heading Experience of the Organisation were: 'a distant and difficult relationship with outside'; 'preoccupation with staff relationships'; and 'feeling unsafe'. The overarching concept of the combined analysis was encapsulated in the quotation: 'Everything contradicts in your mind'.  Clinical and organisational aspects of work seemed separate in the minds of staff, with the latter reported to be more stressful; staff support came in the form of close relationships with colleagues, who saw themselves as isolated in the context of the wider environment. Promotion of the well-being and effectiveness of FMH staff should therefore take account of clinical, organisational and societal aspects of their situation. 2011 John Wiley & Sons, Ltd.

Identification of Silver and Palladium in Irradiated TRISO Coated Particles of the AGR-1 Experiment

DOE Office of Scientific and Technical Information (OSTI.GOV)

van Rooyen, Y. J.; Lillo, T. M.; Wu, Y. Q.

2014-03-01

Evidence of the release of certain metallic fission product through intact tristructural isotropic (TRISO) particles has been seen for decades around the world, as well as in the recent AGR-1 experiment at Idaho National Laboratory (INL). However, understanding the basic mechanism of transport is still lacking. This understanding is important because the TRISO coating is part of the high temperature gas reactor functional containment and critical for the safety strategy for licensing purposes. Our approach to identify fission products in irradiated AGR-1 TRISO fuel using scanning transmission electron microscopy (STEM), Electron Energy Loss Spectroscopy (EELS) and Energy Filtered TEM (EFTEM),more » has led to first-of-a-kind data at the nano-scale indicating the presence of silver at triple points and grain boundaries of the SiC layer in the TRISO particle. Cadmium was also found in the triple junctions. In this initial study, the silver was only identified in SiC grain boundaries and triple points on the edge of the SiC-IPyC interface up to a depth of approximately 0.5 um. Palladium was identified as the main constituent of micron-sized precipitates present at the SiC grain boundaries. Additionally spherical nano-sized palladium rich precipitates were found inside the SiC grains. These nano-sized Pd precipitates were distributed up to a depth of 5 um away from the SiC-IPyC interlayer. No silver was found in the center of the micron-sized fission product precipitates using these techniques, although silver was found on the outer edge of one of the Pd-U-Si containing precipitates which was facing the IPyC layer. Only Pd-U containing precipitates were identified in the IPyC layer and no silver was identified in the IPyC layer. The identification of silver alongside the grain boundaries and the findings of Pd alongside grain boundaries as well as inside the grains, provide significant knowledge for understanding silver and palladium transport in TIRSO fuel, which has been the topic of international research for the past forty years. Additionally the usefulness of the advanced electron microscopic techniques for TRISO coated particle research is demonstrated in this paper.« less

Hyperproduction of alpha-toxin by Staphylococcus aureus results in paradoxically reduced virulence in experimental endocarditis: a host defense role for platelet microbicidal proteins.

PubMed Central

Bayer, A S; Ramos, M D; Menzies, B E; Yeaman, M R; Shen, A J; Cheung, A L

1997-01-01

Staphylococcal alpha-toxin targets several cell types which are important components of cardiac vegetations in endocarditis, including platelets, erythrocytes, and endothelial cells. We evaluated the in vivo role of Staphylococcus aureus alpha-toxin in experimental endocarditis by using isogenic strains differing in the capacity to produce functional alpha-toxin, including 8325-4 (wild-type strain), DU-1090 (a mutant strain with allelic replacement of the alpha-toxin gene [hla]), DU1090(pH35L) (a mutant strain producing a target cell-binding but nonlytic toxin), DU1090(pDU1212) (a variant of DU1090 carrying the cloned hla gene on a multicopy plasmid), and DU1090(pCL84::hla) (a variant of DU1090 with a single copy of the hla gene cloned into the chromosomal lipase locus). In vitro, wild-type alpha-toxin (from parental strain 8325-4) extensively lysed both erythrocytes and platelets. In contrast, mutant alpha-toxin [from strain DU1090(pH35L)] lysed neither cell type. Following exposure to the wild-type alpha-toxin, platelet lysates were found to contain microbicidal activity against Bacillus subtilis (but not against Micrococcus luteus), as well as against the parental and alpha-toxin variant S. aureus strains noted above. Furthermore, lysate microbicidal activity was heat stable, neutralized by polyanionic filters or compounds, and recoverable from anionic filter membranes by hypertonic saline elution. These characteristics are consistent with those of cationic platelet microbicidal proteins (PMPs). Reverse-phase high-pressure liquid chromatography and polyacrylamide gel electrophoresis confirmed the presence of three distinct PMPs (1, 2, and 3) in platelet lysates. In experimental endocarditis, the two variant staphylococcal strains producing either minimal alpha-toxin or nonlytic alpha-toxin in vitro [strains DU1090 and DU1090(pH35L), respectively] exhibited significantly lower virulence in vivo than the parental strain (decreased intravegetation staphylococcal densities). Paradoxically, the two variant staphylococcal strains producing alpha-toxin at supraparental levels in vitro [strains DU1090(p1212) and DU1090(pCL84::hla)] also exhibited significantly decreased induction rates and intravegetation staphylococcal densities in experimental endocarditis versus the parental strain. The reduced in vivo virulence of the latter variant staphylococcal strains could not be explained by differences in bacteremic clearance or initial adherence to sterile vegetations (compared to the parental strain). These findings suggest that the reduced virulence exhibited by the variant staphylococcal strains in this model was related to pathogenetic events subsequent to bacterial adherence to the damaged endocardium. Excess intravegetation secretion of alpha-toxin, leading to increased PMP release (secondary to either increased platelet secretion or lysis), may well explain the reduced virulence observed in experimental endocarditis. PMID:9353046

Sexual and ethnic identity development among gay-bisexual-questioning (GBQ) male ethnic minority adolescents.

PubMed

Jamil, Omar B; Harper, Gary W; Fernandez, M Isabel

2009-07-01

Identity development is a critical task of adolescence and occurs across multiple areas of self-identification. Although research on the identity development process among individuals who are ethnic and sexual minorities has been conducted for individuals who have 1 minority status or the other, few studies have examined these processes in people who are both ethnic and sexual minorities. In this qualitative study, the authors examined the dual identity development processes related to ethnic and sexual identity among gay-bisexual-questioning (GBQ) Latino and African American male adolescents. Results indicated that the processes associated with the development of sexual orientation and ethnic identity occur concurrently. However, the actual processes involved with the development of each identity not only differed, but seemed to be independent of each other because neither process was referenced in the development of the other. Overall, the process of ethnic identity development involved the process of becoming aware of one's ethnic and cultural heritage, whereas sexual identity development involved finding one's own personally relevant sexual orientation label and connecting to that community. The implications of these findings for the development of interventions to assist in the healthy development of GBQ adolescents are discussed.

Sexual and Ethnic Identity Development among Gay/Bisexual/Questioning (GBQ) Male Ethnic Minority Adolescents

PubMed Central

Jamil, Omar B.; Harper, Gary W.; Fernandez, M. Isabel

2010-01-01

Identity development is a critical task of adolescence and occurs across multiple areas of self identification. Though research on the identity development process among individuals who are ethnic and sexual minorities has been conducted for individuals who have one minority status or the other, few studies have examined these processes in persons who are both ethnic and sexual minorities. This qualitative study examined the dual identity development processes related to ethnic and sexual identity among gay/bisexual/questioning (GBQ) Latino and African American male adolescents. Results indicated that the processes associated with the development of sexual orientation and ethnic identity occur concurrently. However, the actual processes involved with the development of each identity not only differed, but seemed to be independent of each other since neither process was referenced in the development of the other. Overall, the process of ethnic identity development involved the process of becoming aware of one’s ethnic and cultural heritage, while sexual identity development involved finding one’s own personally relevant sexual orientation label and connecting to that community. The implications of these findings for the development of interventions to assist in the healthy development of GBQ adolescents are discussed. PMID:19594249

Process Correlation Analysis Model for Process Improvement Identification

PubMed Central

Park, Sooyong

2014-01-01

Software process improvement aims at improving the development process of software systems. It is initiated by process assessment identifying strengths and weaknesses and based on the findings, improvement plans are developed. In general, a process reference model (e.g., CMMI) is used throughout the process of software process improvement as the base. CMMI defines a set of process areas involved in software development and what to be carried out in process areas in terms of goals and practices. Process areas and their elements (goals and practices) are often correlated due to the iterative nature of software development process. However, in the current practice, correlations of process elements are often overlooked in the development of an improvement plan, which diminishes the efficiency of the plan. This is mainly attributed to significant efforts and the lack of required expertise. In this paper, we present a process correlation analysis model that helps identify correlations of process elements from the results of process assessment. This model is defined based on CMMI and empirical data of improvement practices. We evaluate the model using industrial data. PMID:24977170

Process correlation analysis model for process improvement identification.

PubMed

Choi, Su-jin; Kim, Dae-Kyoo; Park, Sooyong

2014-01-01

Software process improvement aims at improving the development process of software systems. It is initiated by process assessment identifying strengths and weaknesses and based on the findings, improvement plans are developed. In general, a process reference model (e.g., CMMI) is used throughout the process of software process improvement as the base. CMMI defines a set of process areas involved in software development and what to be carried out in process areas in terms of goals and practices. Process areas and their elements (goals and practices) are often correlated due to the iterative nature of software development process. However, in the current practice, correlations of process elements are often overlooked in the development of an improvement plan, which diminishes the efficiency of the plan. This is mainly attributed to significant efforts and the lack of required expertise. In this paper, we present a process correlation analysis model that helps identify correlations of process elements from the results of process assessment. This model is defined based on CMMI and empirical data of improvement practices. We evaluate the model using industrial data.

Development and demonstration of manufacturing processes for fabricating graphite/LARC 160 polyimide structural elements

NASA Technical Reports Server (NTRS)

Frost, R. K.; Jones, J. S.; Dynes, P. J.; Wykes, D. H.

1981-01-01

The development and demonstration of manufacturing technologies for the structural application of Celion graphite/LARC-160 polyimide composite material is discussed. Process development and fabrication of demonstration components are discussed. Process development included establishing quality assurance of the basic composite material and processing, nondestructive inspection of fabricated components, developing processes for specific structural forms, and qualification of processes through mechanical testing. Demonstration components were fabricated. The demonstration components consisted of flat laminates, skin/stringer panels, honeycomb panels, chopped fiber compression moldings, and a technology demonstrator segment (TDS) representative of the space shuttle aft body flap.

Optimum processing of mammographic film.

PubMed

Sprawls, P; Kitts, E L

1996-03-01

Underprocessing of mammographic film can result in reduced contrast and visibility of breast structures and an unnecessary increase in radiation dose to the patient. Underprocessing can be caused by physical factors (low developer temperature, inadequate development time, insufficient developer agitation) or chemical factors (developer not optimized for film type; overdiluted, underreplenished, contaminated, or frequently changed developer). Conventional quality control programs are designed to produce consistent processing but do not address the issue of optimum processing. Optimum processing is defined as the level of processing that produces the film performance characteristics (contrast and sensitivity) specified by the film manufacturer. Optimum processing of mammographic film can be achieved by following a two-step protocol. The first step is to set up the processing conditions according to recommendations from the film and developer chemistry manufacturers. The second step is to verify the processing results by comparing them with sensitometric data provided by the film manufacturer.

78 FR 47012 - Developing Software Life Cycle Processes Used in Safety Systems of Nuclear Power Plants

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-02

... NUCLEAR REGULATORY COMMISSION [NRC-2012-0195] Developing Software Life Cycle Processes Used in... revised regulatory guide (RG), revision 1 of RG 1.173, ``Developing Software Life Cycle Processes for... Developing a Software Project Life Cycle Process,'' issued 2006, with the clarifications and exceptions as...

A Software Development Simulation Model of a Spiral Process

NASA Technical Reports Server (NTRS)

Mizell, Carolyn; Malone, Linda

2007-01-01

There is a need for simulation models of software development processes other than the waterfall because processes such as spiral development are becoming more and more popular. The use of a spiral process can make the inherently difficult job of cost and schedule estimation even more challenging due to its evolutionary nature, but this allows for a more flexible process that can better meet customers' needs. This paper will present a discrete event simulation model of spiral development that can be used to analyze cost and schedule effects of using such a process in comparison to a waterfall process.

Building a Training and Development Program.

ERIC Educational Resources Information Center

Bare, Alan C.

An approach to building an effective training and development (T&D) process within postsecondary institutions is described. The process involves three distinct phases: developing an inservice skills training program, institutionalizing an on-the-job career development process, and conducting organizational development activities. The focus of the…

Developments in Signature Process Control

NASA Astrophysics Data System (ADS)

Keller, L. B.; Dominski, Marty

1993-01-01

Developments in the adaptive process control technique known as Signature Process Control for Advanced Composites (SPCC) are described. This computer control method for autoclave processing of composites was used to develop an optimum cure cycle for AFR 700B polyamide and for an experimental poly-isoimide. An improved process cycle was developed for Avimid N polyamide. The potential for extending the SPCC technique to pre-preg quality control, press modeling, pultrusion and RTM is briefly discussed.

A Dual-Process Account of the Development of Scientific Reasoning: The Nature and Development of Metacognitive Intercession Skills

ERIC Educational Resources Information Center

Amsel, Eric; Klaczynski, Paul A.; Johnston, Adam; Bench, Shane; Close, Jason; Sadler, Eric; Walker, Rick

2008-01-01

Metacognitive knowledge of the dual-processing basis of judgment is critical to resolving conflict between analytic and experiential processing responses [Klaczynski, P. A. (2004). A dual-process model of adolescent development: Implications for decision making, reasoning, and identity. In R. V. Kail (Ed.), "Advances in child development and…

Technology and development requirements for advanced coal conversion systems

NASA Technical Reports Server (NTRS)

1981-01-01

A compendium of coal conversion process descriptions is presented. The SRS and MC data bases were utilized to provide information paticularly in the areas of existing process designs and process evaluations. Additional information requirements were established and arrangements were made to visit process developers, pilot plants, and process development units to obtain information that was not otherwise available. Plant designs, process descriptions and operating conditions, and performance characteristics were analyzed and requirements for further development identified and evaluated to determine the impact of these requirements on the process commercialization potential from the standpoint of economics and technical feasibility. A preliminary methodology was established for the comparative technical and economic assessment of advanced processes.

76 FR 19100 - Maria Carmen Palazzo: Debarment Order

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-06

... development or approval, including the process for development or approval, of any drug product or otherwise... development or approval, including the process for development or approval, of any drug product or otherwise... approval, including the process for development or approval, of any drug product and otherwise relating to...

An Implicit Model Development Process for Bounding External, Seemingly Intangible/Non-Quantifiable Factors

DTIC Science & Technology

2017-06-01

This research expands the modeling and simulation (M and S) body of knowledge through the development of an Implicit Model Development Process (IMDP...When augmented to traditional Model Development Processes (MDP), the IMDP enables the development of models that can address a broader array of...where a broader, more holistic approach of defining a models referent is achieved. Next, the IMDP codifies the process for implementing the improved model

Technological Improvements for Digital Fire Control Systems

DTIC Science & Technology

2017-09-30

Final Technical Status Report For DOTC-12-01-INIT061 Technological Improvements for Digital Fire Control Systems Reporting Period: 30 Sep...Initiative Information Develop and fabricate next generation designs using advanced materials and processes. This will include but is not limited to...4.2 Develop manufacturing processes 100% 4.3 Develop manufacturing processes 100% 4.4 Develop manufacturing processes 100% 5 Design Tooling

Business Development Process

DTIC Science & Technology

2001-10-31

832-4736. DISTRIBUTION STATEMENT A Approved for Public Release Distribution Unlimited Attorney Docket No. 83042 BUSINESS DEVELOPMENT PROCESS TO... BUSINESS DEVELOPMENT PROCESS 3 4 STATEMENT OF GOVERNMENT INTEREST 5 The invention described herein may be manufactured and used 6 by or for the...INVENTION 11 (1) Field of the Invention 12 This invention generally relates to a business 13 development process for assessing new business ideas

24 CFR 1003.304 - Funding process.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 24 Housing and Urban Development 4 2012-04-01 2012-04-01 false Funding process. 1003.304 Section 1003.304 Housing and Urban Development REGULATIONS RELATING TO HOUSING AND URBAN DEVELOPMENT (CONTINUED... Application and Selection Process § 1003.304 Funding process. (a) Notification. Area ONAPs will notify...

24 CFR 1003.304 - Funding process.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 24 Housing and Urban Development 4 2011-04-01 2011-04-01 false Funding process. 1003.304 Section 1003.304 Housing and Urban Development REGULATIONS RELATING TO HOUSING AND URBAN DEVELOPMENT (CONTINUED... Application and Selection Process § 1003.304 Funding process. (a) Notification. Area ONAPs will notify...

24 CFR 1003.304 - Funding process.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 24 Housing and Urban Development 4 2014-04-01 2014-04-01 false Funding process. 1003.304 Section 1003.304 Housing and Urban Development REGULATIONS RELATING TO HOUSING AND URBAN DEVELOPMENT (CONTINUED... Application and Selection Process § 1003.304 Funding process. (a) Notification. Area ONAPs will notify...

24 CFR 1003.304 - Funding process.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 24 Housing and Urban Development 4 2013-04-01 2013-04-01 false Funding process. 1003.304 Section 1003.304 Housing and Urban Development REGULATIONS RELATING TO HOUSING AND URBAN DEVELOPMENT (CONTINUED... Application and Selection Process § 1003.304 Funding process. (a) Notification. Area ONAPs will notify...

24 CFR 1003.304 - Funding process.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Funding process. 1003.304 Section 1003.304 Housing and Urban Development Regulations Relating to Housing and Urban Development (Continued... Application and Selection Process § 1003.304 Funding process. (a) Notification. Area ONAPs will notify...

Flat-plate solar array project. Volume 5: Process development

NASA Technical Reports Server (NTRS)

Gallagher, B.; Alexander, P.; Burger, D.

1986-01-01

The goal of the Process Development Area, as part of the Flat-Plate Solar Array (FSA) Project, was to develop and demonstrate solar cell fabrication and module assembly process technologies required to meet the cost, lifetime, production capacity, and performance goals of the FSA Project. R&D efforts expended by Government, Industry, and Universities in developing processes capable of meeting the projects goals during volume production conditions are summarized. The cost goals allocated for processing were demonstrated by small volume quantities that were extrapolated by cost analysis to large volume production. To provide proper focus and coverage of the process development effort, four separate technology sections are discussed: surface preparation, junction formation, metallization, and module assembly.

Investigation of the Relationship Between Sensory Processing and Motor Development in Preterm Infants.

PubMed

Celik, Halil Ibrahim; Elbasan, Bulent; Gucuyener, Kivilcim; Kayihan, Hulya; Huri, Meral

The aim of this study was to analyze the correlation between sensory processing and motor development in preterm infants. We included 30 preterm and 30 term infants with corrected and chronological ages between 10 and 12 mo. We used the Test of Sensory Functions in Infants to evaluate sensory processing and the Alberta Infant Motor Scale to evaluate motor development. The Spearman correlation test indicated a strong positive relationship between sensory processing and motor development in preterm infants (r = .63, p < .001). Given the relationship between sensory processing and motor development in the preterm group, the evaluation of sensory processing and motor development in preterm infants was considered necessary for the effective implementation of physiotherapy assessment and interventions. Copyright © 2018 by the American Occupational Therapy Association, Inc.

ASRM test report: Autoclave cure process development

NASA Technical Reports Server (NTRS)

Nachbar, D. L.; Mitchell, Suzanne

1992-01-01

ASRM insulated segments will be autoclave cured following insulation pre-form installation and strip wind operations. Following competitive bidding, Aerojet ASRM Division (AAD) Purchase Order 100142 was awarded to American Fuel Cell and Coated Fabrics Company, Inc. (Amfuel), Magnolia, AR, for subcontracted insulation autoclave cure process development. Autoclave cure process development test requirements were included in Task 3 of TM05514, Manufacturing Process Development Specification for Integrated Insulation Characterization and Stripwind Process Development. The test objective was to establish autoclave cure process parameters for ASRM insulated segments. Six tasks were completed to: (1) evaluate cure parameters that control acceptable vulcanization of ASRM Kevlar-filled EPDM insulation material; (2) identify first and second order impact parameters on the autoclave cure process; and (3) evaluate insulation material flow-out characteristics to support pre-form configuration design.

Life cycle analysis within pharmaceutical process optimization and intensification: case study of active pharmaceutical ingredient production.

PubMed

Ott, Denise; Kralisch, Dana; Denčić, Ivana; Hessel, Volker; Laribi, Yosra; Perrichon, Philippe D; Berguerand, Charline; Kiwi-Minsker, Lioubov; Loeb, Patrick

2014-12-01

As the demand for new drugs is rising, the pharmaceutical industry faces the quest of shortening development time, and thus, reducing the time to market. Environmental aspects typically still play a minor role within the early phase of process development. Nevertheless, it is highly promising to rethink, redesign, and optimize process strategies as early as possible in active pharmaceutical ingredient (API) process development, rather than later at the stage of already established processes. The study presented herein deals with a holistic life-cycle-based process optimization and intensification of a pharmaceutical production process targeting a low-volume, high-value API. Striving for process intensification by transfer from batch to continuous processing, as well as an alternative catalytic system, different process options are evaluated with regard to their environmental impact to identify bottlenecks and improvement potentials for further process development activities. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

SOI-CMOS Process for Monolithic, Radiation-Tolerant, Science-Grade Imagers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Williams, George; Lee, Adam

In Phase I, Voxtel worked with Jazz and Sandia to document and simulate the processes necessary to implement a DH-BSI SOI CMOS imaging process. The development is based upon mature SOI CMOS process at both fabs, with the addition of only a few custom processing steps for integration and electrical interconnection of the fully-depleted photodetectors. In Phase I, Voxtel also characterized the Sandia process, including the CMOS7 design rules, and we developed the outline of a process option that included a “BOX etch”, that will permit a “detector in handle” SOI CMOS process to be developed The process flows weremore » developed in cooperation with both Jazz and Sandia process engineers, along with detailed TCAD modeling and testing of the photodiode array architectures. In addition, Voxtel tested the radiation performance of the Jazz’s CA18HJ process, using standard and circular-enclosed transistors.« less

Processes of Personality Development in Adulthood: The TESSERA Framework.

PubMed

Wrzus, Cornelia; Roberts, Brent W

2017-08-01

The current article presents a theoretical framework of the short- and long-term processes underlying personality development throughout adulthood. The newly developed TESSERA framework posits that long-term personality development occurs due to repeated short-term, situational processes. These short-term processes can be generalized as recursive sequence of Triggering situations, Expectancy, States/State expressions, and Reactions (TESSERA). Reflective and associative processes on TESSERA sequences can lead to personality development (i.e., continuity and lasting changes in explicit and implicit personality characteristics and behavioral patterns). We illustrate how the TESSERA framework facilitates a more comprehensive understanding of normative and differential personality development at various ages during the life span. The TESSERA framework extends previous theories by explicitly linking short- and long-term processes of personality development, by addressing different manifestations of personality, and by being applicable to different personality characteristics, for example, behavioral traits, motivational orientations, or life narratives.

Achieving continuous manufacturing for final dosage formation: challenges and how to meet them. May 20-21, 2014 Continuous Manufacturing Symposium.

PubMed

Byrn, Stephen; Futran, Maricio; Thomas, Hayden; Jayjock, Eric; Maron, Nicola; Meyer, Robert F; Myerson, Allan S; Thien, Michael P; Trout, Bernhardt L

2015-03-01

We describe the key issues and possibilities for continuous final dosage formation, otherwise known as downstream processing or drug product manufacturing. A distinction is made between heterogeneous processing and homogeneous processing, the latter of which is expected to add more value to continuous manufacturing. We also give the key motivations for moving to continuous manufacturing, some of the exciting new technologies, and the barriers to implementation of continuous manufacturing. Continuous processing of heterogeneous blends is the natural first step in converting existing batch processes to continuous. In heterogeneous processing, there are discrete particles that can segregate, versus in homogeneous processing, components are blended and homogenized such that they do not segregate. Heterogeneous processing can incorporate technologies that are closer to existing technologies, where homogeneous processing necessitates the development and incorporation of new technologies. Homogeneous processing has the greatest potential for reaping the full rewards of continuous manufacturing, but it takes long-term vision and a more significant change in process development than heterogeneous processing. Heterogeneous processing has the detriment that, as the technologies are adopted rather than developed, there is a strong tendency to incorporate correction steps, what we call below "The Rube Goldberg Problem." Thus, although heterogeneous processing will likely play a major role in the near-term transformation of heterogeneous to continuous processing, it is expected that homogeneous processing is the next step that will follow. Specific action items for industry leaders are: Form precompetitive partnerships, including industry (pharmaceutical companies and equipment manufacturers), government, and universities. These precompetitive partnerships would develop case studies of continuous manufacturing and ideally perform joint-technology development, including development of small-scale equipment and processes. Develop ways to invest internally in continuous manufacturing. How best to do this will depend on the specifics of a given organization, in particular the current development projects. Upper managers will need to energize their process developers to incorporate continuous manufacturing in at least part of their processes to gain experience and demonstrate directly the benefits. Training of continuous manufacturing technologies, organizational approaches, and regulatory approaches is a key area that industrial leaders should pursue together. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association.

Improving Video Game Development: Facilitating Heterogeneous Team Collaboration through Flexible Software Processes

NASA Astrophysics Data System (ADS)

Musil, Juergen; Schweda, Angelika; Winkler, Dietmar; Biffl, Stefan

Based on our observations of Austrian video game software development (VGSD) practices we identified a lack of systematic processes/method support and inefficient collaboration between various involved disciplines, i.e. engineers and artists. VGSD includes heterogeneous disciplines, e.g. creative arts, game/content design, and software. Nevertheless, improving team collaboration and process support is an ongoing challenge to enable a comprehensive view on game development projects. Lessons learned from software engineering practices can help game developers to increase game development processes within a heterogeneous environment. Based on a state of the practice survey in the Austrian games industry, this paper presents (a) first results with focus on process/method support and (b) suggests a candidate flexible process approach based on Scrum to improve VGSD and team collaboration. Results showed (a) a trend to highly flexible software processes involving various disciplines and (b) identified the suggested flexible process approach as feasible and useful for project application.

A Prototype for the Support of Integrated Software Process Development and Improvement

NASA Astrophysics Data System (ADS)

Porrawatpreyakorn, Nalinpat; Quirchmayr, Gerald; Chutimaskul, Wichian

An efficient software development process is one of key success factors for quality software. Not only can the appropriate establishment but also the continuous improvement of integrated project management and of the software development process result in efficiency. This paper hence proposes a software process maintenance framework which consists of two core components: an integrated PMBOK-Scrum model describing how to establish a comprehensive set of project management and software engineering processes and a software development maturity model advocating software process improvement. Besides, a prototype tool to support the framework is introduced.

Model for Simulating a Spiral Software-Development Process

NASA Technical Reports Server (NTRS)

Mizell, Carolyn; Curley, Charles; Nayak, Umanath

2010-01-01

A discrete-event simulation model, and a computer program that implements the model, have been developed as means of analyzing a spiral software-development process. This model can be tailored to specific development environments for use by software project managers in making quantitative cases for deciding among different software-development processes, courses of action, and cost estimates. A spiral process can be contrasted with a waterfall process, which is a traditional process that consists of a sequence of activities that include analysis of requirements, design, coding, testing, and support. A spiral process is an iterative process that can be regarded as a repeating modified waterfall process. Each iteration includes assessment of risk, analysis of requirements, design, coding, testing, delivery, and evaluation. A key difference between a spiral and a waterfall process is that a spiral process can accommodate changes in requirements at each iteration, whereas in a waterfall process, requirements are considered to be fixed from the beginning and, therefore, a waterfall process is not flexible enough for some projects, especially those in which requirements are not known at the beginning or may change during development. For a given project, a spiral process may cost more and take more time than does a waterfall process, but may better satisfy a customer's expectations and needs. Models for simulating various waterfall processes have been developed previously, but until now, there have been no models for simulating spiral processes. The present spiral-process-simulating model and the software that implements it were developed by extending a discrete-event simulation process model of the IEEE 12207 Software Development Process, which was built using commercially available software known as the Process Analysis Tradeoff Tool (PATT). Typical inputs to PATT models include industry-average values of product size (expressed as number of lines of code), productivity (number of lines of code per hour), and number of defects per source line of code. The user provides the number of resources, the overall percent of effort that should be allocated to each process step, and the number of desired staff members for each step. The output of PATT includes the size of the product, a measure of effort, a measure of rework effort, the duration of the entire process, and the numbers of injected, detected, and corrected defects as well as a number of other interesting features. In the development of the present model, steps were added to the IEEE 12207 waterfall process, and this model and its implementing software were made to run repeatedly through the sequence of steps, each repetition representing an iteration in a spiral process. Because the IEEE 12207 model is founded on a waterfall paradigm, it enables direct comparison of spiral and waterfall processes. The model can be used throughout a software-development project to analyze the project as more information becomes available. For instance, data from early iterations can be used as inputs to the model, and the model can be used to estimate the time and cost of carrying the project to completion.

77 FR 17460 - Multistakeholder Process To Develop Consumer Data Privacy Codes of Conduct

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-26

.... 120214135-2203-02] RIN 0660-XA27 Multistakeholder Process To Develop Consumer Data Privacy Codes of Conduct... request for public comments on the multistakeholder process to develop consumer data privacy codes of...-multistakeholder-process without change. All personal identifying information (for example, name, address...

77 FR 50724 - Developing Software Life Cycle Processes for Digital Computer Software Used in Safety Systems of...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-22

... NUCLEAR REGULATORY COMMISSION [NRC-2012-0195] Developing Software Life Cycle Processes for Digital... Software Life Cycle Processes for Digital Computer Software used in Safety Systems of Nuclear Power Plants... clarifications, the enhanced consensus practices for developing software life-cycle processes for digital...

An intraorganizational model for developing and spreading quality improvement innovations.

PubMed

Kellogg, Katherine C; Gainer, Lindsay A; Allen, Adrienne S; OʼSullivan, Tatum; Singer, Sara J

Recent policy reforms encourage quality improvement (QI) innovations in primary care, but practitioners lack clear guidance regarding spread inside organizations. We designed this study to identify how large organizations can facilitate intraorganizational spread of QI innovations. We conducted ethnographic observation and interviews in a large, multispecialty, community-based medical group that implemented three QI innovations across 10 primary care sites using a new method for intraorganizational process development and spread. We compared quantitative outcomes achieved through the group's traditional versus new method, created a process model describing the steps in the new method, and identified barriers and facilitators at each step. The medical group achieved substantial improvement using its new method of intraorganizational process development and spread of QI innovations: standard work for rooming and depression screening, vaccine error rates and order compliance, and Pap smear error rates. Our model details nine critical steps for successful intraorganizational process development (set priorities, assess the current state, develop the new process, and measure and refine) and spread (develop support, disseminate information, facilitate peer-to-peer training, reinforce, and learn and adapt). Our results highlight the importance of utilizing preexisting organizational structures such as established communication channels, standardized roles, common workflows, formal authority, and performance measurement and feedback systems when developing and spreading QI processes inside an organization. In particular, we detail how formal process advocate positions in each site for each role can facilitate the spread of new processes. Successful intraorganizational spread is possible and sustainable. Developing and spreading new QI processes across sites inside an organization requires creating a shared understanding of the necessary process steps, considering the barriers that may arise at each step, and leveraging preexisting organizational structures to facilitate intraorganizational process development and spread.

An intraorganizational model for developing and spreading quality improvement innovations

PubMed Central

Kellogg, Katherine C.; Gainer, Lindsay A.; Allen, Adrienne S.; O'Sullivan, Tatum; Singer, Sara J.

2017-01-01

Background: Recent policy reforms encourage quality improvement (QI) innovations in primary care, but practitioners lack clear guidance regarding spread inside organizations. Purpose: We designed this study to identify how large organizations can facilitate intraorganizational spread of QI innovations. Methodology/Approach: We conducted ethnographic observation and interviews in a large, multispecialty, community-based medical group that implemented three QI innovations across 10 primary care sites using a new method for intraorganizational process development and spread. We compared quantitative outcomes achieved through the group’s traditional versus new method, created a process model describing the steps in the new method, and identified barriers and facilitators at each step. Findings: The medical group achieved substantial improvement using its new method of intraorganizational process development and spread of QI innovations: standard work for rooming and depression screening, vaccine error rates and order compliance, and Pap smear error rates. Our model details nine critical steps for successful intraorganizational process development (set priorities, assess the current state, develop the new process, and measure and refine) and spread (develop support, disseminate information, facilitate peer-to-peer training, reinforce, and learn and adapt). Our results highlight the importance of utilizing preexisting organizational structures such as established communication channels, standardized roles, common workflows, formal authority, and performance measurement and feedback systems when developing and spreading QI processes inside an organization. In particular, we detail how formal process advocate positions in each site for each role can facilitate the spread of new processes. Practice Implications: Successful intraorganizational spread is possible and sustainable. Developing and spreading new QI processes across sites inside an organization requires creating a shared understanding of the necessary process steps, considering the barriers that may arise at each step, and leveraging preexisting organizational structures to facilitate intraorganizational process development and spread. PMID:27428788

Integrated approaches to the application of advanced modeling technology in process development and optimization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Allgor, R.J.; Feehery, W.F.; Tolsma, J.E.

The batch process development problem serves as good candidate to guide the development of process modeling environments. It demonstrates that very robust numerical techniques are required within an environment that can collect, organize, and maintain the data and models required to address the batch process development problem. This paper focuses on improving the robustness and efficiency of the numerical algorithms required in such a modeling environment through the development of hybrid numerical and symbolic strategies.

Developing Worksheet (LKS) Base on Process Skills in Curriculum 2013 at Elementary School Grade IV,V,VI

NASA Astrophysics Data System (ADS)

Subhan, M.; Oktolita, N.; Kn, M.

2018-04-01

The Lacks of students' skills in the learning process is due to lacks of exercises in the form of LKS. In the curriculum of 2013, there is no LKS as a companion to improve the students' skills. In order to solve those problem, it is necessary to develop LKS based on process skills as a teaching material to improve students' process skills. The purpose of this study is to develop LKS Process Skills based elementary school grade IV, V, VI which is integrated by process skill. The development of LKS can be used to develop the thematic process skills of elementary school students grade IV, V, VI based on curriculum 2013. The expected long-term goal is to produce teaching materials LKS Process Skill based of Thematic learning that is able to develop the process skill of elementary school students grade IV, V, VI. This development research refers to the steps developed by Borg & Gall (1983). The development process is carried out through 10 stages: preliminary research and gathering information, planning, draft development, initial test (limited trial), first product revision, final trial (field trial), product operational revision, Desemination and implementation. The limited subject of the this research is the students of SDN in Dharmasraya grade IV, V, VI. The field trial subjects in the experimental class are the students of SDN Dharmasraya grade IV, V, VI who have implemented the curriculum 2013. The data are collected by using LKS validation sheets, process skill observation sheets, and Thematic learning test (pre-test And post-test). The result of LKS development on the validity score is 81.70 (very valid), on practical score is 83.94 (very practical), and on effectiveness score is 86.67 (very effective). In the trial step the use of LKS using One Group Pretest-Posttest Design research design. The purpose of this trial is to know the effectiveness level of LKS result of development for improving the process skill of students in grade IV, V, and VI of elementary school. The data collection in this research uses the test result sheet of the process skill through pre-test and post-test. Observation results were analyzed with SPSS 16.0 software. The Result of analysis learning process of student skill of Sig value. (2-tailed) (0,000) <α (0.005) then H0 is rejected. There is a significant difference to the development of process skills between students using LKS with students who do not use LKS. It can be concluded that LKS have accuracy, ease and can improve result learn on aspect of skill process of student of grade IV, V and VI elementary school.

Distillate fuel-oil processing for phosphoric acid fuel cell power plants

NASA Astrophysics Data System (ADS)

1980-02-01

Efforts to develop distillate oil steam reforming processes are reviewed, and the applicability of these processes for integration with the fuel cell are discussed. The development efforts can be grouped into the following processing approaches: high temperature steam reforming; autothermal reforming; autothermal gasification; and ultra desulfurization followed by steam reforming. Sulfur in the feed is a problem in the process development.

Development of environmentally conscious cleaning process for leadless chip carrier assemblies. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Adams, B.E.

1995-04-01

A cross-functional team of process, product, quality, material, and design lab engineers was assembled to develop an environmentally friendly cleaning process for leadless chip carrier assemblies (LCCAs). Using flush and filter testing, Auger surface analysis, GC-Mass spectrophotometry, production yield results, and electrical testing results over an extended testing period, the team developed an aqueous cleaning process for LCCAs. The aqueous process replaced the Freon vapor degreasing/ultrasonic rinse process.

A Process Research Framework: The International Process Research Consortium

DTIC Science & Technology

2006-12-01

projects ? 52 Theme P | IPRC Framework 5 P-30 How should a process for collaborative development be formulated? The development at different companies...requires some process for the actual collaboration . How should it be handled? P-31 How do we handle change? Requirements change during development ...source projects employ a single-site development model in which there is no large community of testers but rather a single-site small group

Drug Development Process

MedlinePlus

... Home Food Drugs Medical Devices Radiation-Emitting Products Vaccines, Blood & Biologics Animal & Veterinary Cosmetics Tobacco Products For Patients Home For Patients Learn About Drug and Device Approvals The Drug Development Process The Drug Development Process Share Tweet Linkedin Pin ...

A Petri Net-Based Software Process Model for Developing Process-Oriented Information Systems

NASA Astrophysics Data System (ADS)

Li, Yu; Oberweis, Andreas

Aiming at increasing flexibility, efficiency, effectiveness, and transparency of information processing and resource deployment in organizations to ensure customer satisfaction and high quality of products and services, process-oriented information systems (POIS) represent a promising realization form of computerized business information systems. Due to the complexity of POIS, explicit and specialized software process models are required to guide POIS development. In this chapter we characterize POIS with an architecture framework and present a Petri net-based software process model tailored for POIS development with consideration of organizational roles. As integrated parts of the software process model, we also introduce XML nets, a variant of high-level Petri nets as basic methodology for business processes modeling, and an XML net-based software toolset providing comprehensive functionalities for POIS development.

Developing Elementary Math and Science Process Skills Through Engineering Design Instruction

NASA Astrophysics Data System (ADS)

Strong, Matthew G.

This paper examines how elementary students can develop math and science process skills through an engineering design approach to instruction. The performance and development of individual process skills overall and by gender were also examined. The study, preceded by a pilot, took place in a grade four extracurricular engineering design program in a public, suburban school district. Students worked in pairs and small groups to design and construct airplane models from styrofoam, paper clips, and toothpicks. The development and performance of process skills were assessed through a student survey of learning gains, an engineering design packet rubric (student work), observation field notes, and focus group notes. The results indicate that students can significantly develop process skills, that female students may develop process skills through engineering design better than male students, and that engineering design is most helpful for developing the measuring, suggesting improvements, and observing process skills. The study suggests that a more regular engineering design program or curriculum could be beneficial for students' math and science abilities both in this school and for the elementary field as a whole.

Thread, Web and Tapestry-making: Processes of Development and Language.

ERIC Educational Resources Information Center

Robinson, Clinton D. W.

1999-01-01

Reviews the major features of participatory development, asking how far similar processes are applied in promoting the use of local languages. Argues that language development processes must figure into participatory approaches to develop multilingual environments and that attention to language must proceed along similar participatory lines. (CMK)

Introduction of male circumcision for HIV prevention in Uganda: analysis of the policy process.

PubMed

Odoch, Walter Denis; Kabali, Kenneth; Ankunda, Racheal; Zulu, Joseph Mumba; Tetui, Moses

2015-06-20

Health policy analysis is important for all health policies especially in fields with ever changing evidence-based interventions such as HIV prevention. However, there are few published reports of health policy analysis in sub-Saharan Africa in this field. This study explored the policy process of the introduction of male circumcision (MC) for HIV prevention in Uganda in order to inform the development processes of similar health policies. Desk review of relevant documents was conducted between March and May 2012. Thematic analysis was used to analyse the data. Conceptual frameworks that demonstrate the interrelationship within the policy development processes and influence of actors in the policy development processes guided the analysis. Following the introduction of MC on the national policy agenda in 2007, negotiation and policy formulation preceded its communication and implementation. Policy proponents included academic researchers in the early 2000s and development partners around 2007. Favourable contextual factors that supported the development of the policy included the rising HIV prevalence, adoption of MC for HIV prevention in other sub-Saharan African countries, and expertise on MC. Additionally, the networking capability of proponents facilitated the change in position of non-supportive or neutral actors. Non-supportive and neutral actors in the initial stages of the policy development process included the Ministry of Health, traditional and Muslim leaders, and the Republican President. Using political authority, legitimacy, and charisma, actors who opposed the policy tried to block the policy development process. Researchers' initial disregard of the Ministry of Health in the research process of MC and the missing civil society advocacy arm contributed to delays in the policy development process. This study underscores the importance of securing top political leadership as well as key implementing partners' support in policy development processes. Equally important is the appreciation of the various forms of actors' power and how such power shapes the policy agenda, development process, and content.

Analysis of complex decisionmaking processes. [with application to jet engine development

NASA Technical Reports Server (NTRS)

Hill, J. D.; Ollila, R. G.

1978-01-01

The analysis of corporate decisionmaking processes related to major system developments is unusually difficult because of the number of decisionmakers involved in the process and the long development cycle. A method for analyzing such decision processes is developed and illustrated through its application to the analysis of the commercial jet engine development process. The method uses interaction matrices as the key tool for structuring the problem, recording data, and analyzing the data to establish the rank order of the major factors affecting development decisions. In the example, the use of interaction matrices permitted analysts to collect and analyze approximately 50 factors that influenced decisions during the four phases of the development cycle, and to determine the key influencers of decisions at each development phase. The results of this study indicate that the cost of new technology installed on an aircraft is the prime concern of the engine manufacturer.

Engaged for Change: A Community-Engaged Process for Developing Interventions to Reduce Health Disparities.

PubMed

Rhodes, Scott D; Mann-Jackson, Lilli; Alonzo, Jorge; Simán, Florence M; Vissman, Aaron T; Nall, Jennifer; Abraham, Claire; Aronson, Robert E; Tanner, Amanda E

2017-12-01

The science underlying the development of individual, community, system, and policy interventions designed to reduce health disparities has lagged behind other innovations. Few models, theoretical frameworks, or processes exist to guide intervention development. Our community-engaged research partnership has been developing, implementing, and evaluating efficacious interventions to reduce HIV disparities for over 15 years. Based on our intervention research experiences, we propose a novel 13-step process designed to demystify and guide intervention development. Our intervention development process includes steps such as establishing an intervention team to manage the details of intervention development; assessing community needs, priorities, and assets; generating intervention priorities; evaluating and incorporating theory; developing a conceptual or logic model; crafting activities; honing materials; administering a pilot, noting its process, and gathering feedback from all those involved; and editing the intervention based on what was learned. Here, we outline and describe each of these 13 steps.

Developing a practice guideline for the occupational health services by using a community of practice approach: a process evaluation of the development process.

PubMed

Kwak, Lydia; Wåhlin, Charlotte; Stigmar, Kjerstin; Jensen, Irene

2017-01-18

One way to facilitate the translation of research into the occupational health service practice is through clinical practice guidelines. To increase the implementability of guidelines it is important to include the end-users in the development, for example by a community of practice approach. This paper describes the development of an occupational health practice guideline aimed at the management of non-specific low back pain (LBP) by using a community of practice approach. The paper also includes a process evaluation of the development providing insight into the feasibility of the process. A multidisciplinary community of practice group (n = 16) consisting of occupational nurses, occupational physicians, ergonomists/physical therapists, health and safety engineers, health educators, psychologists and researchers from different types of occupational health services and geographical regions within Sweden met eleven times (June 2012-December 2013) to develop the practice guideline following recommendations of guideline development handbooks. Process-outcomes recruitment, reach, context, satisfaction, feasibility and fidelity were assessed by questionnaire, observations and administrative data. Group members attended on average 7.5 out of 11 meetings. Half experienced support from their workplace for their involvement. Feasibility was rated as good, except for time-scheduling. Most group members were satisfied with the structure of the process (e.g. presentations, multidisciplinary group). Fidelity was rated as fairly high. The described development process is a feasible process for guideline development. For future guideline development expectations of the work involved should be more clearly communicated, as well as the purpose and tasks of the CoP-group. Moreover, possibilities to improve support from managers and colleagues should be explored. This paper has important implications for future guideline development; it provides valuable information on how practitioners can be included in the development process, with the aim of increasing the implementability of the developed guidelines.

Dimpled ball grid array process development for space flight applications

NASA Technical Reports Server (NTRS)

Barr, S. L.; Mehta, A.

2000-01-01

A 472 dimpled ball grid array (D-BGA) package has not been used in past space flight environments, therefore it was necessary to develop a process that would yield robust and reliable solder joints. The process developing assembly, inspection and rework techniques, were verified by conducting environmental tests. Since the 472 D-BGA packages passed the above environmental tests within the specifications, the process was successfully developed for space flight electronics.

Review of Exploration Systems Development (ESD) Integrated Hazard Development Process. Volume 1; Appendices

NASA Technical Reports Server (NTRS)

Smiles, Michael D.; Blythe, Michael P.; Bejmuk, Bohdan; Currie, Nancy J.; Doremus, Robert C.; Franzo, Jennifer C.; Gordon, Mark W.; Johnson, Tracy D.; Kowaleski, Mark M.; Laube, Jeffrey R.

2015-01-01

The Chief Engineer of the Exploration Systems Development (ESD) Office requested that the NASA Engineering and Safety Center (NESC) perform an independent assessment of the ESD's integrated hazard development process. The focus of the assessment was to review the integrated hazard analysis (IHA) process and identify any gaps/improvements in the process (e.g., missed causes, cause tree completeness, missed hazards). This document contains the outcome of the NESC assessment.

Review of Exploration Systems Development (ESD) Integrated Hazard Development Process. Appendices; Volume 2

NASA Technical Reports Server (NTRS)

Smiles, Michael D.; Blythe, Michael P.; Bejmuk, Bohdan; Currie, Nancy J.; Doremus, Robert C.; Franzo, Jennifer C.; Gordon, Mark W.; Johnson, Tracy D.; Kowaleski, Mark M.; Laube, Jeffrey R.

2015-01-01

The Chief Engineer of the Exploration Systems Development (ESD) Office requested that the NASA Engineering and Safety Center (NESC) perform an independent assessment of the ESD's integrated hazard development process. The focus of the assessment was to review the integrated hazard analysis (IHA) process and identify any gaps/improvements in the process (e.g. missed causes, cause tree completeness, missed hazards). This document contains the outcome of the NESC assessment.

Technology development for lunar base water recycling

NASA Technical Reports Server (NTRS)

Schultz, John R.; Sauer, Richard L.

1992-01-01

This paper will review previous and ongoing work in aerospace water recycling and identify research activities required to support development of a lunar base. The development of a water recycle system for use in the life support systems envisioned for a lunar base will require considerable research work. A review of previous work on aerospace water recycle systems indicates that more efficient physical and chemical processes are needed to reduce expendable and power requirements. Development work on biological processes that can be applied to microgravity and lunar environments also needs to be initiated. Biological processes are inherently more efficient than physical and chemical processes and may be used to minimize resupply and waste disposal requirements. Processes for recovering and recycling nutrients such as nitrogen, phosphorus, and sulfur also need to be developed to support plant growth units. The development of efficient water quality monitors to be used for process control and environmental monitoring also needs to be initiated.

Data Processing and First Products from the Hyperspectral Imager for the Coastal Ocean (HICO) on the International Space Station

DTIC Science & Technology

2010-04-01

NRL Stennis Space Center (NRL-SSC) for further processing using the NRL SSC Automated Processing System (APS). APS was developed for processing...have not previously developed automated processing for 73 hyperspectral ocean color data. The hyperspectral processing branch includes several

The Importance of Process-Oriented Accessibility Guidelines for Web Developers.

PubMed

Steen-Hansen, Linn; Fagernes, Siri

2016-01-01

Current accessibility research shows that in the web development, the process itself may lead to inaccessible web sites and applications. Common practices typically do not allow sufficient testing. The focus is mainly on complying with minimum standards, and treating accessibility compliance as a sort of bug-fixing process, missing the user perspective. In addition, there is an alarming lack of knowledge and experience with accessibility issues. It has also been argued that bringing accessibility into the development process at all stages is the only way to achieve the highest possible level of accessibility. The work presented in this paper is based on a previous project focusing on guidelines for developing accessible rich Internet applications. The guidelines were classified as either process-oriented or technology-oriented. In this paper, we examine the process-oriented guidelines and give a practical perspective on how these guidelines will make the development process more accessibility-friendly.

Automated Array Assembly, Phase 2

NASA Technical Reports Server (NTRS)

Carbajal, B. G.

1979-01-01

The solar cell module process development activities in the areas of surface preparation are presented. The process step development was carried out on texture etching including the evolution of a conceptual process model for the texturing process; plasma etching; and diffusion studies that focused on doped polymer diffusion sources. Cell processing was carried out to test process steps and a simplified diode solar cell process was developed. Cell processing was also run to fabricate square cells to populate sample minimodules. Module fabrication featured the demonstration of a porcelainized steel glass structure that should exceed the 20 year life goal of the low cost silicon array program. High efficiency cell development was carried out in the development of the tandem junction cell and a modification of the TJC called the front surface field cell. Cell efficiencies in excess of 16 percent at AM1 have been attained with only modest fill factors. The transistor-like model was proposed that fits the cell performance and provides a guideline for future improvements in cell performance.

Developing Cultural Literacy through the Writing Process: Empowering All Learners.

ERIC Educational Resources Information Center

Palmer, Barbara C.; And Others

Combining the expansion of cultural literacy with the development of process-based writing, this book addresses each stage of the writing process, with emphasis on the recursive and overlapping nature of these stages. Numerous related model activities at the end of each chapter show how to develop the writing process, while expanding the writer's…

Development and efficiency assessment of process lubrication for hot forging

NASA Astrophysics Data System (ADS)

Kargin, S.; Artyukh, Viktor; Ignatovich, I.; Dikareva, Varvara

2017-10-01

The article considers innovative technologies in testing and production of process lubricants for hot bulk forging. There were developed new compositions of eco-friendly water-graphite process lubricants for hot extrusion and forging. New approaches to efficiency assessment of process lubricants are developed and described in the following article. Laboratory and field results are presented.

77 FR 56646 - Wayne E. Spencer: Debarment Order

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-13

..., including the process for development or approval, of a drug product under the FD&C Act. Dr. Spencer was..., including the process for development or approval, of a drug product under the FD&C Act. On March 7, 2012... to the development or approval, including the process for development or approval, of a drug product...

Matthew Oliver | NREL

Science.gov Websites

Process Development Unit. NREL's Thermal and Catalytic Process Development Unit can process 1/2 ton per biomass to fuels and chemicals Affiliated Research Programs Thermochemical Process Integration, Scale-Up

Large-scale production of diesel-like biofuels - process design as an inherent part of microorganism development.

PubMed

Cuellar, Maria C; Heijnen, Joseph J; van der Wielen, Luuk A M

2013-06-01

Industrial biotechnology is playing an important role in the transition to a bio-based economy. Currently, however, industrial implementation is still modest, despite the advances made in microorganism development. Given that the fuels and commodity chemicals sectors are characterized by tight economic margins, we propose to address overall process design and efficiency at the start of bioprocess development. While current microorganism development is targeted at product formation and product yield, addressing process design at the start of bioprocess development means that microorganism selection can also be extended to other critical targets for process technology and process scale implementation, such as enhancing cell separation or increasing cell robustness at operating conditions that favor the overall process. In this paper we follow this approach for the microbial production of diesel-like biofuels. We review current microbial routes with both oleaginous and engineered microorganisms. For the routes leading to extracellular production, we identify the process conditions for large scale operation. The process conditions identified are finally translated to microorganism development targets. We show that microorganism development should be directed at anaerobic production, increasing robustness at extreme process conditions and tailoring cell surface properties. All the same time, novel process configurations integrating fermentation and product recovery, cell reuse and low-cost technologies for product separation are mandatory. This review provides a state-of-the-art summary of the latest challenges in large-scale production of diesel-like biofuels. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Exploring the Role of Usability in the Software Process: A Study of Irish Software SMEs

NASA Astrophysics Data System (ADS)

O'Connor, Rory V.

This paper explores the software processes and usability techniques used by Small and Medium Enterprises (SMEs) that develop web applications. The significance of this research is that it looks at development processes used by SMEs in order to assess to what degree usability is integrated into the process. This study seeks to gain an understanding into the level of awareness of usability within SMEs today and their commitment to usability in practice. The motivation for this research is to explore the current development processes used by SMEs in developing web applications and to understand how usability is represented in those processes. The background for this research is provided by the growth of the web application industry beyond informational web sites to more sophisticated applications delivering a broad range of functionality. This paper presents an analysis of the practices of several Irish SMEs that develop web applications through a series of case studies. With the focus on SMEs that develop web applications as Management Information Systems and not E-Commerce sites, informational sites, online communities or web portals. This study gathered data about the usability techniques practiced by these companies and their awareness of usability in the context of the software process in those SMEs. The contribution of this study is to further the understanding of the current role of usability within the software development processes of SMEs that develop web applications.

An assessment of space shuttle flight software development processes

NASA Technical Reports Server (NTRS)

1993-01-01

In early 1991, the National Aeronautics and Space Administration's (NASA's) Office of Space Flight commissioned the Aeronautics and Space Engineering Board (ASEB) of the National Research Council (NRC) to investigate the adequacy of the current process by which NASA develops and verifies changes and updates to the Space Shuttle flight software. The Committee for Review of Oversight Mechanisms for Space Shuttle Flight Software Processes was convened in Jan. 1992 to accomplish the following tasks: (1) review the entire flight software development process from the initial requirements definition phase to final implementation, including object code build and final machine loading; (2) review and critique NASA's independent verification and validation process and mechanisms, including NASA's established software development and testing standards; (3) determine the acceptability and adequacy of the complete flight software development process, including the embedded validation and verification processes through comparison with (1) generally accepted industry practices, and (2) generally accepted Department of Defense and/or other government practices (comparing NASA's program with organizations and projects having similar volumes of software development, software maturity, complexity, criticality, lines of code, and national standards); (4) consider whether independent verification and validation should continue. An overview of the study, independent verification and validation of critical software, and the Space Shuttle flight software development process are addressed. Findings and recommendations are presented.

A conceptual model for the development process of confirmatory adaptive clinical trials within an emergency research network.

PubMed

Mawocha, Samkeliso C; Fetters, Michael D; Legocki, Laurie J; Guetterman, Timothy C; Frederiksen, Shirley; Barsan, William G; Lewis, Roger J; Berry, Donald A; Meurer, William J

2017-06-01

Adaptive clinical trials use accumulating data from enrolled subjects to alter trial conduct in pre-specified ways based on quantitative decision rules. In this research, we sought to characterize the perspectives of key stakeholders during the development process of confirmatory-phase adaptive clinical trials within an emergency clinical trials network and to build a model to guide future development of adaptive clinical trials. We used an ethnographic, qualitative approach to evaluate key stakeholders' views about the adaptive clinical trial development process. Stakeholders participated in a series of multidisciplinary meetings during the development of five adaptive clinical trials and completed a Strengths-Weaknesses-Opportunities-Threats questionnaire. In the analysis, we elucidated overarching themes across the stakeholders' responses to develop a conceptual model. Four major overarching themes emerged during the analysis of stakeholders' responses to questioning: the perceived statistical complexity of adaptive clinical trials and the roles of collaboration, communication, and time during the development process. Frequent and open communication and collaboration were viewed by stakeholders as critical during the development process, as were the careful management of time and logistical issues related to the complexity of planning adaptive clinical trials. The Adaptive Design Development Model illustrates how statistical complexity, time, communication, and collaboration are moderating factors in the adaptive design development process. The intensity and iterative nature of this process underscores the need for funding mechanisms for the development of novel trial proposals in academic settings.

Flood replenishment: a new method of processor control.

PubMed

Frank, E D; Gray, J E; Wilken, D A

1980-01-01

In mechanized radiographic film processors that process medium to low volumes of film, roll films, and those that process single-emulsion films from nuclear medicine scans, computed tomography, and ultrasound, it is difficult to maintain the developer solution at a stable processing level. We describe our experience using flood replenishment, which is a method in which developer replenisher containing starter solution is introduced in the processor at timed intervals, independent of the number of films being processed. By this process, a stable level of developer activity is maintained in a processor used to develop a medium to low volume of single-emulsion film.

Spacelab Data Processing Facility (SLDPF) quality assurance expert systems development

NASA Technical Reports Server (NTRS)

Basile, Lisa R.; Kelly, Angelita C.

1987-01-01

The Spacelab Data Processing Facility (SLDPF) is an integral part of the Space Shuttle data network for missions that involve attached scientific payloads. Expert system prototypes were developed to aid in the performance of the quality assurance function of the Spacelab and/or Attached Shuttle Payloads processed telemetry data. The Spacelab Input Processing System (SIPS) and the Spacelab Output Processing System (SOPS), two expert systems, were developed to determine their feasibility and potential in the quality assurance of processed telemetry data. The capabilities and performance of these systems are discussed.

Is There Room for "Development" in Developmental Models of Information Processing Biases to Threat in Children and Adolescents?

ERIC Educational Resources Information Center

Field, Andy P.; Lester, Kathryn J.

2010-01-01

Clinical and experimental theories assume that processing biases in attention and interpretation are a causal mechanism through which anxiety develops. Despite growing evidence that these processing biases are present in children and, therefore, develop long before adulthood, these theories ignore the potential role of child development. This…

Implementing a Process to Measure Return on Investment for Nursing Professional Development.

PubMed

Garrison, Elisabeth; Beverage, Jodie

Return on investment (ROI) is one way to quantify the value that nursing professional development brings to the organization. This article describes a process to begin tracking ROI for nursing professional development. Implementing a process of tracking nursing professional development practitioners' ROI increased awareness of the financial impact and effectiveness of the department.

42 CFR 137.295 - May Self-Governance Tribes elect to develop their own environmental review process?

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false May Self-Governance Tribes elect to develop their... SELF-GOVERNANCE Construction Nepa Process § 137.295 May Self-Governance Tribes elect to develop their own environmental review process? Yes, Self-Governance Tribes may develop their own environmental...

Facilitating Behavior Change with Low-Literacy Patient Education Materials

ERIC Educational Resources Information Center

Seligman, Hilary K.; Wallace, Andrea S.; DeWalt, Darren A.; Schillinger, Dean; Arnold, Connie L.; Shilliday, Betsy Bryant; Delgadillo, Adriana; Bengal, Nikki; Davis, Terry C.

2007-01-01

Objective: To describe a process for developing low-literacy health education materials that increase knowledge and activate patients toward healthier behaviors. Methods: We developed a theoretically informed process for developing educational materials. This process included convening a multidisciplinary creative team, soliciting stakeholder…

Some Evaluative Comments Based on a Review of the Curriculum Development Processes Operating in the Stanford Program on International and Cross Cultural Education. [and] A Review of the Curriculum. Development Processes Operating in the Stanford Program on International and Cross-Cultural Education.

ERIC Educational Resources Information Center

Kennedy, Kerry J.

The processes of instructional materials development and dissemination used in four Stanford Program on International and Cross Cultural Education (SPICE) projects dealing with Latin America, Africa, China, and Japan are described, and evaluative comments based on a review of the curriculum development process are made. The major purpose of the…

The Racial and Ethnic Identity Formation Process of Second-Generation Asian Indian Americans: A Phenomenological Study.

PubMed

Iwamoto, Derek Kenji; Negi, Nalini Junko; Partiali, Rachel Negar; Creswell, John W

2013-10-01

This phenomenological study elucidates the identity development processes of 12 second-generation adult Asian Indian Americans. The results identify salient sociocultural factors and multidimensional processes of racial and ethnic identity development. Discrimination, parental, and community factors seemed to play a salient role in influencing participants' racial and ethnic identity development. The emergent Asian Indian American racial and ethnic identity model provides a contextualized overview of key developmental periods and turning points within the process of identity development.

Virtual Collaborative Simulation Environment for Integrated Product and Process Development

NASA Technical Reports Server (NTRS)

Gulli, Michael A.

1997-01-01

Deneb Robotics is a leader in the development of commercially available, leading edge three- dimensional simulation software tools for virtual prototyping,, simulation-based design, manufacturing process simulation, and factory floor simulation and training applications. Deneb has developed and commercially released a preliminary Virtual Collaborative Engineering (VCE) capability for Integrated Product and Process Development (IPPD). This capability allows distributed, real-time visualization and evaluation of design concepts, manufacturing processes, and total factory and enterprises in one seamless simulation environment.

The Racial and Ethnic Identity Formation Process of Second-Generation Asian Indian Americans: A Phenomenological Study

PubMed Central

Iwamoto, Derek Kenji; Negi, Nalini Junko; Partiali, Rachel Negar; Creswell, John W.

2014-01-01

This phenomenological study elucidates the identity development processes of 12 second-generation adult Asian Indian Americans. The results identify salient sociocultural factors and multidimensional processes of racial and ethnic identity development. Discrimination, parental, and community factors seemed to play a salient role in influencing participants’ racial and ethnic identity development. The emergent Asian Indian American racial and ethnic identity model provides a contextualized overview of key developmental periods and turning points within the process of identity development. PMID:25298617

Self-Reacting Friction Stir Welding for Aluminum Complex Curvature Applications

NASA Technical Reports Server (NTRS)

Brown, Randy J.; Martin, W.; Schneider, J.; Hartley, P. J.; Russell, Carolyn; Lawless, Kirby; Jones, Chip

2003-01-01

This viewgraph representation provides an overview of sucessful research conducted by Lockheed Martin and NASA to develop an advanced self-reacting friction stir technology for complex curvature aluminum alloys. The research included weld process development for 0.320 inch Al 2219, sucessful transfer from the 'lab' scale to the production scale tool and weld quality exceeding strenght goals. This process will enable development and implementation of large scale complex geometry hardware fabrication. Topics covered include: weld process development, weld process transfer, and intermediate hardware fabrication.

Exploiting mAb structure characteristics for a directed QbD implementation in early process development.

PubMed

Karlberg, Micael; von Stosch, Moritz; Glassey, Jarka

2018-03-07

In today's biopharmaceutical industries, the lead time to develop and produce a new monoclonal antibody takes years before it can be launched commercially. The reasons lie in the complexity of the monoclonal antibodies and the need for high product quality to ensure clinical safety which has a significant impact on the process development time. Frameworks such as quality by design are becoming widely used by the pharmaceutical industries as they introduce a systematic approach for building quality into the product. However, full implementation of quality by design has still not been achieved due to attrition mainly from limited risk assessment of product properties as well as the large number of process factors affecting product quality that needs to be investigated during the process development. This has introduced a need for better methods and tools that can be used for early risk assessment and predictions of critical product properties and process factors to enhance process development and reduce costs. In this review, we investigate how the quantitative structure-activity relationships framework can be applied to an existing process development framework such as quality by design in order to increase product understanding based on the protein structure of monoclonal antibodies. Compared to quality by design, where the effect of process parameters on the drug product are explored, quantitative structure-activity relationships gives a reversed perspective which investigates how the protein structure can affect the performance in different unit operations. This provides valuable information that can be used during the early process development of new drug products where limited process understanding is available. Thus, quantitative structure-activity relationships methodology is explored and explained in detail and we investigate the means of directly linking the structural properties of monoclonal antibodies to process data. The resulting information as a decision tool can help to enhance the risk assessment to better aid process development and thereby overcome some of the limitations and challenges present in QbD implementation today.

[Contention on the theory of processing techniques of Chinese materia medica in the Ming-Qing period].

PubMed

Chen, Bin; Jia, Tianzhu

2015-03-01

On the basis of the golden stage of development of processing techniques of medicinals in the Song dynasty, the theory and techniques of processing in the Ming-Qing dynasties developed and accomplished further. The knowledge of some physicians on the processing of common medicinal, such as Radix rehmannia and Radixophiopogonis, was questioned, with new idea of processing methods put forward and argued against those insisting traditional ones, marking the progress of the art of processing. By reviewing the contention of technical theory of medicinal processing in the Ming-Qing period, useful references can be provided for the inheritance and development of the traditional art of processing medicinals.

A continuous process for the development of Kodak Aerochrome Infrared Film 2443 as a negative

NASA Astrophysics Data System (ADS)

Klimes, D.; Ross, D. I.

1993-02-01

A process for the continuous dry-to-dry development of Kodak Aerochrome Infrared Film 2443 as a negative (CIR-neg) is described. The process is well suited for production processing of long film lengths. Chemicals from three commercial film processes are used with modifications. Sensitometric procedures are recommended for the monitoring of processing quality control. Sensitometric data and operational aerial exposures indicate that films developed in this process have approximately the same effective aerial film speed as films processed in the reversal process recommended by the manufacturer (Kodak EA-5). The CIR-neg process is useful when aerial photography is acquired for resources management applications which require print reproductions. Originals can be readily reproduced using conventional production equipment (electronic dodging) in black and white or color (color compensation).

Digital Signal Processing Based Biotelemetry Receivers

NASA Technical Reports Server (NTRS)

Singh, Avtar; Hines, John; Somps, Chris

1997-01-01

This is an attempt to develop a biotelemetry receiver using digital signal processing technology and techniques. The receiver developed in this work is based on recovering signals that have been encoded using either Pulse Position Modulation (PPM) or Pulse Code Modulation (PCM) technique. A prototype has been developed using state-of-the-art digital signal processing technology. A Printed Circuit Board (PCB) is being developed based on the technique and technology described here. This board is intended to be used in the UCSF Fetal Monitoring system developed at NASA. The board is capable of handling a variety of PPM and PCM signals encoding signals such as ECG, temperature, and pressure. A signal processing program has also been developed to analyze the received ECG signal to determine heart rate. This system provides a base for using digital signal processing in biotelemetry receivers and other similar applications.

Pre- and Post-Processing Tools to Streamline the CFD Process

NASA Technical Reports Server (NTRS)

Dorney, Suzanne Miller

2002-01-01

This viewgraph presentation provides information on software development tools to facilitate the use of CFD (Computational Fluid Dynamics) codes. The specific CFD codes FDNS and CORSAIR are profiled, and uses for software development tools with these codes during pre-processing, interim-processing, and post-processing are explained.

Developing a Phonological Awareness Curriculum: Reflections on an Implementation Science Framework

ERIC Educational Resources Information Center

Goldstein, Howard; Olszewski, Arnold

2015-01-01

Purpose: This article describes the process of developing and implementing a supplemental early literacy curriculum designed for preschoolers demonstrating delays in literacy development. Method: Intervention research and implementation research have traditionally been viewed as sequential processes. This article illustrates a process of…

43 CFR 10005.17 - Plan development process.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 43 Public Lands: Interior 2 2011-10-01 2011-10-01 false Plan development process. 10005.17 Section 10005.17 Public Lands: Interior Regulations Relating to Public Lands (Continued) UTAH RECLAMATION...'S MITIGATION AND CONSERVATION PLAN § 10005.17 Plan development process. Following adoption of the...

40 CFR 35.613 - Competitive process.

Code of Federal Regulations, 2012 CFR

2012-07-01

... STATE AND LOCAL ASSISTANCE Environmental Program Grants for Tribes Wetlands Development Grant Program (section 104(b)(3)) § 35.613 Competitive process. Wetlands development grants are awarded on a competitive... process is complete, the recipient can, at its discretion, accept the award as a wetlands development...

40 CFR 35.613 - Competitive process.

Code of Federal Regulations, 2011 CFR

2011-07-01

... STATE AND LOCAL ASSISTANCE Environmental Program Grants for Tribes Wetlands Development Grant Program (section 104(b)(3)) § 35.613 Competitive process. Wetlands development grants are awarded on a competitive... process is complete, the recipient can, at its discretion, accept the award as a wetlands development...

40 CFR 35.613 - Competitive process.

Code of Federal Regulations, 2013 CFR

2013-07-01

... STATE AND LOCAL ASSISTANCE Environmental Program Grants for Tribes Wetlands Development Grant Program (section 104(b)(3)) § 35.613 Competitive process. Wetlands development grants are awarded on a competitive... process is complete, the recipient can, at its discretion, accept the award as a wetlands development...

Recent Developments in Advanced Automated Post-Processing at AMOS

DTIC Science & Technology

2014-09-01

Borelli KJS Consulting Lisa Thompson Air Force Research Laboratory ABSTRACT A new automated post-processing system has been developed to...the existing algorithms in addition to the development of new data processing features. 6. REFERENCES 1 Matson, C.L., Beckner, C.C., Borelli , K

Government Open Systems Interconnection Profile (GOSIP) Transition Strategy

DTIC Science & Technology

1993-09-01

it explores some of the GOSIP protocol details and discusses the process by which standards organizations have developed their...version 1 and 2. Additionally, it explores some of the GOSIP protocol details and discusses the process by which standards organizations have developed ...ORGANIZATION OF STUDY 1. The Standards Process Chapter II describes the process whereby standards are developed and adopted by the ISO and how the

Integration of utility and environmental activities in the project development process.

DOT National Transportation Integrated Search

2010-01-01

Two sources of delay during the project development process are utility adjustments and the environmental : review and clearance process. There are several efforts underway at the Texas Department of Transportation : (TxDOT) to optimize these process...

IMPROVING INDUSTRIAL WASTEWATER TREATMENT PROCESS RELIABILITY TO ENHANCE SUSTAINABLE DEVELOPMENT

EPA Science Inventory

Sustainable development includes the recovery of resources from industrial manufacturing processes. One valuable resource that can often be purified and reused is process wastewater. Typically, pollutants are removed from process wastewater using physical, chemical, and biologica...

A Decision Tool that Combines Discrete Event Software Process Models with System Dynamics Pieces for Software Development Cost Estimation and Analysis

NASA Technical Reports Server (NTRS)

Mizell, Carolyn Barrett; Malone, Linda

2007-01-01

The development process for a large software development project is very complex and dependent on many variables that are dynamic and interrelated. Factors such as size, productivity and defect injection rates will have substantial impact on the project in terms of cost and schedule. These factors can be affected by the intricacies of the process itself as well as human behavior because the process is very labor intensive. The complex nature of the development process can be investigated with software development process models that utilize discrete event simulation to analyze the effects of process changes. The organizational environment and its effects on the workforce can be analyzed with system dynamics that utilizes continuous simulation. Each has unique strengths and the benefits of both types can be exploited by combining a system dynamics model and a discrete event process model. This paper will demonstrate how the two types of models can be combined to investigate the impacts of human resource interactions on productivity and ultimately on cost and schedule.

Developing evidence-based physical therapy clinical practice guidelines.

PubMed

Kaplan, Sandra L; Coulter, Colleen; Fetters, Linda

2013-01-01

Recommended strategies for developing evidence-based clinical practice guidelines (CPGs) are provided. The intent is that future CPGs developed with the support of the Section on Pediatrics of the American Physical Therapy Association would consistently follow similar developmental processes to yield consistent quality and presentation. Steps in the process of developing CPGs are outlined and resources are provided to assist CPG developers in carrying out their task. These recommended processes may also be useful to CPG developers representing organizations with similar structures, objectives, and resources.

Development and demonstration of manufacturing processes for fabricating graphite/LARC-160 polyimide structural elements, part 4, paragraph B

NASA Technical Reports Server (NTRS)

1980-01-01

A quality assurance program was developed which included specifications for celion/LARC-160 polyimide materials and quality control of materials and processes. The effects of monomers and/or polymer variables and prepeg variables on the processibility of celion/LARC prepeg were included. Processes for fabricating laminates, honeycomb core panels, and chopped fiber moldings were developed. Specimens and conduct tests were fabricated to qualify the processes for fabrication of demonstration components.

Rehabilitation centers in change: participatory methods for managing redesign and renovation.

PubMed

Lahtinen, Marjaana; Nenonen, Suvi; Rasila, Heidi; Lehtelä, Jouni; Ruohomäki, Virpi; Reijula, Kari

2014-01-01

The aim of this article is to describe a set of participatory methods that we have either developed or modified for developing future work and service environments to better suit renewable rehabilitation processes. We discuss the methods in a larger framework of change process model and participatory design. Rehabilitation organizations are currently in transition; customer groups, financing, services, and the processes of rehabilitation centers are changing. The pressure for change challenges the centers to develop both their processes and facilities. There is a need for methods that support change management. Four participatory methods were developed: future workshop, change survey, multi-method assessment tool, and participatory design generator cards. They were tested and evaluated in three rehabilitation centers at the different phases of their change process. The developed methods were considered useful in creating a mutual understanding of the change goals between different stakeholders, providing a good picture of the work community's attitudes toward the change, forming an integrated overview of the built and perceived environment, inspiring new solutions, and supporting the management in steering the change process. The change process model described in this article serves as a practical framework that combined the viewpoints of organizational and facility development. However, participatory design continues to face challenges concerning communication between different stakeholders, and further development of the methods and processes is still needed. Intervention studies could provide data on the success factors that enhance the transformations in the rehabilitation sector. Design process, methodology, organizational transformation, planning, renovation.

An Ibm PC/AT-Based Image Acquisition And Processing System For Quantitative Image Analysis

NASA Astrophysics Data System (ADS)

Kim, Yongmin; Alexander, Thomas

1986-06-01

In recent years, a large number of applications have been developed for image processing systems in the area of biological imaging. We have already finished the development of a dedicated microcomputer-based image processing and analysis system for quantitative microscopy. The system's primary function has been to facilitate and ultimately automate quantitative image analysis tasks such as the measurement of cellular DNA contents. We have recognized from this development experience, and interaction with system users, biologists and technicians, that the increasingly widespread use of image processing systems, and the development and application of new techniques for utilizing the capabilities of such systems, would generate a need for some kind of inexpensive general purpose image acquisition and processing system specially tailored for the needs of the medical community. We are currently engaged in the development and testing of hardware and software for a fairly high-performance image processing computer system based on a popular personal computer. In this paper, we describe the design and development of this system. Biological image processing computer systems have now reached a level of hardware and software refinement where they could become convenient image analysis tools for biologists. The development of a general purpose image processing system for quantitative image analysis that is inexpensive, flexible, and easy-to-use represents a significant step towards making the microscopic digital image processing techniques more widely applicable not only in a research environment as a biologist's workstation, but also in clinical environments as a diagnostic tool.

Collaboration process for integrated social and health care strategy implementation.

PubMed

Korpela, Jukka; Elfvengren, Kalle; Kaarna, Tanja; Tepponen, Merja; Tuominen, Markku

2012-01-01

To present a collaboration process for creating a roadmap for the implementation of a strategy for integrated health and social care. The developed collaboration process includes multiple phases and uses electronic group decision support system technology (GDSS). A case study done in the South Karelia District of Social and Health Services in Finland during 2010-2011. An expert panel of 13 participants was used in the planning process of the strategy implementation. The participants were interviewed and observed during the case study. As a practical result, a roadmap for integrated health and social care strategy implementation has been developed. The strategic roadmap includes detailed plans of several projects which are needed for successful integration strategy implementation. As an academic result, a collaboration process to create such a roadmap has been developed. The collaboration process and technology seem to suit the planning process well. The participants of the meetings were satisfied with the collaboration process and the GDSS technology. The strategic roadmap was accepted by the participants, which indicates satisfaction with the developed process.

A neuroconstructivist model of past tense development and processing.

PubMed

Westermann, Gert; Ruh, Nicolas

2012-07-01

We present a neural network model of learning and processing the English past tense that is based on the notion that experience-dependent cortical development is a core aspect of cognitive development. During learning the model adds and removes units and connections to develop a task-specific final architecture. The model provides an integrated account of characteristic errors during learning the past tense, adult generalization to pseudoverbs, and dissociations between verbs observed after brain damage in aphasic patients. We put forward a theory of verb inflection in which a functional processing architecture develops through interactions between experience-dependent brain development and the structure of the environment, in this case, the statistical properties of verbs in the language. The outcome of this process is a structured processing system giving rise to graded dissociations between verbs that are easy and verbs that are hard to learn and process. In contrast to dual-mechanism accounts of inflection, we argue that describing dissociations as a dichotomy between regular and irregular verbs is a post hoc abstraction and is not linked to underlying processing mechanisms. We extend current single-mechanism accounts of inflection by highlighting the role of structural adaptation in development and in the formation of the adult processing system. In contrast to some single-mechanism accounts, we argue that the link between irregular inflection and verb semantics is not causal and that existing data can be explained on the basis of phonological representations alone. This work highlights the benefit of taking brain development seriously in theories of cognitive development. Copyright 2012 APA, all rights reserved.

Development of the Upgraded DC Brush Gear Motor for Spacebus Platforms

NASA Technical Reports Server (NTRS)

Berning, Robert H.; Viout, Olivier

2010-01-01

The obsolescence of materials and processes used in the manufacture of traditional DC brush gear motors has necessitated the development of an upgraded DC brush gear motor (UBGM). The current traditional DC brush gear motor (BGM) design was evaluated using Six-Sigma process to identify potential design and production process improvements. The development effort resulted in a qualified UBGM design which improved manufacturability and reduced production costs. Using Six-Sigma processes and incorporating lessons learned during the development process also improved motor performance for UBGM making it a more viable option for future use as a deployment mechanism in space flight applications.

Transforming nanomedicine manufacturing toward Quality by Design and microfluidics.

PubMed

Colombo, Stefano; Beck-Broichsitter, Moritz; Bøtker, Johan Peter; Malmsten, Martin; Rantanen, Jukka; Bohr, Adam

2018-04-05

Nanopharmaceuticals aim at translating the unique features of nano-scale materials into therapeutic products and consequently their development relies critically on the progression in manufacturing technology to allow scalable processes complying with process economy and quality assurance. The relatively high failure rate in translational nanopharmaceutical research and development, with respect to new products on the market, is at least partly due to immature bottom-up manufacturing development and resulting sub-optimal control of quality attributes in nanopharmaceuticals. Recently, quality-oriented manufacturing of pharmaceuticals has undergone an unprecedented change toward process and product development interaction. In this context, Quality by Design (QbD) aims to integrate product and process development resulting in an increased number of product applications to regulatory agencies and stronger proprietary defense strategies of process-based products. Although QbD can be applied to essentially any production approach, microfluidic production offers particular opportunities for QbD-based manufacturing of nanopharmaceuticals. Microfluidics provides unique design flexibility, process control and parameter predictability, and also offers ample opportunities for modular production setups, allowing process feedback for continuously operating production and process control. The present review aims at outlining emerging opportunities in the synergistic implementation of QbD strategies and microfluidic production in contemporary development and manufacturing of nanopharmaceuticals. In doing so, aspects of design and development, but also technology management, are reviewed, as is the strategic role of these tools for aligning nanopharmaceutical innovation, development, and advanced industrialization in the broader pharmaceutical field. Copyright © 2018 Elsevier B.V. All rights reserved.

Proposal for establishing structure and process in the development of implicit chiropractic standards of care and practice guidelines.

PubMed

Hansen, D T; Adams, A H; Meeker, W C; Phillips, R B

1992-09-01

With the advent of health care's "era of accountability", the chiropractic profession is now faced with generating implicit standards and guidelines for care or having it done for us by outside agencies. Already we see chiropractic groups in individual states and provinces being pressured into naive efforts of guideline development. Current knowledge and experience are available through recent health care literature that clearly defines the structure and process of guideline development and offers suggestions on how to measure outcomes of those processes. In addition, the United States Congress has directed a new federal agency to oversee this activity and monitor outcomes of quality improvement programs. The time has come for the chiropractic profession to define its exact role in health care delivery and develop implicit standards of care and practice guidelines. This sentinel effort should be managed by a commissioned body of empaneled experts that generally represent the academic and clinical chiropractic profession. A protocol for selection of these panelists and the panel chairperson needs to be developed and memorialized. Appropriate methodology (with definitions) needs to be developed for the process of standards/guideline development. Adherence to the accepted structure and process of guideline development will ensure the continuity of this dynamic process in the coming generations. This proposal offers a preliminary definition of the structure and process, including a "seed" policy statement and decision flow chart, specific to guideline development. Once the structure and process of guideline development for chiropractic are defined, the profession can then present this product to federal and state agencies, private sector health care purchasers, patient advocacy groups and other stakeholders of chiropractic care.(ABSTRACT TRUNCATED AT 250 WORDS)

High-power ultrasonic processing: Recent developments and prospective advances

NASA Astrophysics Data System (ADS)

Gallego-Juarez, Juan A.

2010-01-01

Although the application of ultrasonic energy to produce or to enhance a wide variety of processes have been explored since about the middle of the 20th century, only a reduced number of ultrasonic processes have been established at industrial level. However, during the last ten years the interest in ultrasonic processing has revived particularly in industrial sectors where the ultrasonic technology may represent a clean and efficient tool to improve classical existing processes or an innovation alternative for the development of new processes. Such seems to be the case of relevant sectors such as food industry, environment, pharmaceuticals and chemicals manufacture, machinery, mining, etc where power ultrasound is becoming an emerging technology for process development. The possible major problem in the application of high-intensity ultrasound on industrial processing is the design and development of efficient power ultrasonic systems (generators and reactors) capable of large scale successful operation specifically adapted to each individual process. In the area of ultrasonic processing in fluid media and more specifically in gases, the development of the steppedplate transducers and other power ge with extensive radiating surface has strongly contributed to the implementation at semi-industrial and industrial stage of several commercial applications, in sectors such as food and beverage industry (defoaming, drying, extraction, etc), environment (air cleaning, sludge filtration, etc...), machinery and process for manufacturing (textile washing, paint manufacture, etc). The development of different cavitational reactors for liquid treatment in continuous flow is helping to introduce into industry the wide potential of the area of sonochemistry. Processes such as water and effluent treatment, crystallization, soil remediation, etc have been already implemented at semi-industrial and/or industrial stage. Other single advances in sectors like mining or energy have also to be mentioned. The objective of this paper is to review some recent developments in ultrasonic processing to show the present situation and the prospective progresses of high-power ultrasonics as an innovative technology in many industrial sectors.

High-throughput process development: I. Process chromatography.

PubMed

Rathore, Anurag S; Bhambure, Rahul

2014-01-01

Chromatographic separation serves as "a workhorse" for downstream process development and plays a key role in removal of product-related, host cell-related, and process-related impurities. Complex and poorly characterized raw materials and feed material, low feed concentration, product instability, and poor mechanistic understanding of the processes are some of the critical challenges that are faced during development of a chromatographic step. Traditional process development is performed as trial-and-error-based evaluation and often leads to a suboptimal process. High-throughput process development (HTPD) platform involves an integration of miniaturization, automation, and parallelization and provides a systematic approach for time- and resource-efficient chromatography process development. Creation of such platforms requires integration of mechanistic knowledge of the process with various statistical tools for data analysis. The relevance of such a platform is high in view of the constraints with respect to time and resources that the biopharma industry faces today. This protocol describes the steps involved in performing HTPD of process chromatography step. It described operation of a commercially available device (PreDictor™ plates from GE Healthcare). This device is available in 96-well format with 2 or 6 μL well size. We also discuss the challenges that one faces when performing such experiments as well as possible solutions to alleviate them. Besides describing the operation of the device, the protocol also presents an approach for statistical analysis of the data that is gathered from such a platform. A case study involving use of the protocol for examining ion-exchange chromatography of granulocyte colony-stimulating factor (GCSF), a therapeutic product, is briefly discussed. This is intended to demonstrate the usefulness of this protocol in generating data that is representative of the data obtained at the traditional lab scale. The agreement in the data is indeed very significant (regression coefficient 0.93). We think that this protocol will be of significant value to those involved in performing high-throughput process development of process chromatography.

Biochemical Process Development and Integration | Bioenergy | NREL

Science.gov Websites

Process Development We develop and scale fermentation processes that produce fuels and chemicals from guide experimental designs. Our newly updated fermentation laboratory houses 38 bench-scale fermentors current projects cover the fermentation spectrum including anaerobic, micro-aerobic, aerobic, and gas-to

[Development and innovation of traditional Chinese medicine processing discipline and Chinese herbal pieces industry].

PubMed

Xiao, Yong-Qing; Li, Li; Liu, Ying; Ma, Yin-Lian; Yu, Ding-Rong

2016-01-01

To elucidate the key issues in the development and innovation of traditional Chinese medicine processing discipline and Chinese herbal pieces industry Chinese herbal pieces industry. According to the author's accumulated experience over years and demand of the development of the Chinese herbal pieces industry, the key issues in the development and innovation on the Chinese herbal pieces industry were summarized. According to the author, the traditional Chinese medicine processing discipline shall focus on a application basis research. The development of this discipline should be closely related to the development of Chinese herbal pieces. The traditional Chinese medicine processing discipline can be improved and its results can be transformed only if this discipline were correlated with the Chinese herbal pieces industry, matched with the development of the Chinese herbal pieces industry, and solved the problems in the development on the Chinese herbal pieces industry. The development of traditional Chinese medicine processing discipline and the Chinese herbal pieces industry also requires scientific researchers to make constant innovations, realize the specialty of the researches, and innovate based on inheritance. Copyright© by the Chinese Pharmaceutical Association.

The Hyperspectral Imager for the Coastal Ocean (HICO): Sensor and Data Processing Overview

DTIC Science & Technology

2010-01-20

backscattering coefficients, and others. Several of these software modules will be developed within the Automated Processing System (APS), a data... Automated Processing System (APS) NRL developed APS, which processes satellite data into ocean color data products. APS is a collection of methods...used for ocean color processing which provide the tools for the automated processing of satellite imagery [1]. These tools are in the process of

Transformation from manufacturing process taxonomy to repair process taxonomy: a phenetic approach

NASA Astrophysics Data System (ADS)

Raza, Umair; Ahmad, Wasim; Khan, Atif

2018-02-01

The need of taxonomy is vital for knowledge sharing. This need has been portrayed by through-life engineering services/systems. This paper addresses this issue by repair process taxonomy development. Framework for repair process taxonomy was developed followed by its implementation. The importance of repair process taxonomy has been highlighted.

Development of numerical processing in children with typical and dyscalculic arithmetic skills—a longitudinal study

PubMed Central

Landerl, Karin

2013-01-01

Numerical processing has been demonstrated to be closely associated with arithmetic skills, however, our knowledge on the development of the relevant cognitive mechanisms is limited. The present longitudinal study investigated the developmental trajectories of numerical processing in 42 children with age-adequate arithmetic development and 41 children with dyscalculia over a 2-year period from beginning of Grade 2, when children were 7; 6 years old, to beginning of Grade 4. A battery of numerical processing tasks (dot enumeration, non-symbolic and symbolic comparison of one- and two-digit numbers, physical comparison, number line estimation) was given five times during the study (beginning and middle of each school year). Efficiency of numerical processing was a very good indicator of development in numerical processing while within-task effects remained largely constant and showed low long-term stability before middle of Grade 3. Children with dyscalculia showed less efficient numerical processing reflected in specifically prolonged response times. Importantly, they showed consistently larger slopes for dot enumeration in the subitizing range, an untypically large compatibility effect when processing two-digit numbers, and they were consistently less accurate in placing numbers on a number line. Thus, we were able to identify parameters that can be used in future research to characterize numerical processing in typical and dyscalculic development. These parameters can also be helpful for identification of children who struggle in their numerical development. PMID:23898310

Development of oral health policy in Nigeria: an analysis of the role of context, actors and policy process.

PubMed

Etiaba, Enyi; Uguru, Nkoli; Ebenso, Bassey; Russo, Giuliano; Ezumah, Nkoli; Uzochukwu, Benjamin; Onwujekwe, Obinna

2015-05-06

In Nigeria, there is a high burden of oral health diseases, poor coordination of health services and human resources for delivery of oral health services. Previous attempts to develop an Oral Health Policy (OHP) to decrease the oral disease burden failed. However, a policy was eventually developed in November 2012. This paper explores the role of contextual factors, actors and the policy process in the development of the OHP and possible reasons why the current approved OHP succeeded. The study was undertaken across Nigeria; information gathered through document reviews and in-depth interviews with five groups of purposively selected respondents. Analysis of the policy development process was guided by the policy triangle framework, examining context, policy process and actors involved in the policy development. The foremost enabling factor was the yearning among policy actors for a policy, having had four failed attempts. Other factors were the presence of a democratically elected government, a framework for health sector reform instituted by the Federal Ministry of Health (FMOH). The approved OHP went through all stages required for policy development unlike the previous attempts. Three groups of actors played crucial roles in the process, namely academics/researchers, development partners and policy makers. They either had decision making powers or influenced policy through funding or technical ability to generate credible research evidence, all sharing a common interest in developing the OHP. Although evidence was used to inform the development of the policy, the complex interactions between the context and actors facilitated its approval. The OHP development succeeded through a complex inter-relationship of context, process and actors, clearly illustrating that none of these factors could have, in isolation, catalyzed the policy development. Availability of evidence is necessary but not sufficient for developing policies in this area. Wider socio-political contexts in which actors develop policy can facilitate and/or constrain actors' roles and interests as well as policy process. These must be taken into consideration at stages of policy development in order to produce policies that will strengthen the health system, especially in low and middle-income countries, where policy processes and influences can be often less than transparent.

Case study: Lockheed-Georgia Company integrated design process

NASA Technical Reports Server (NTRS)

Waldrop, C. T.

1980-01-01

A case study of the development of an Integrated Design Process is presented. The approach taken in preparing for the development of an integrated design process includes some of the IPAD approaches such as developing a Design Process Model, cataloging Technical Program Elements (TPE's), and examining data characteristics and interfaces between contiguous TPE's. The implementation plan is based on an incremental development of capabilities over a period of time with each step directed toward, and consistent with, the final architecture of a total integrated system. Because of time schedules and different computer hardware, this system will not be the same as the final IPAD release; however, many IPAD concepts will no doubt prove applicable as the best approach. Full advantage will be taken of the IPAD development experience. A scenario that could be typical for many companies, even outside the aerospace industry, in developing an integrated design process for an IPAD-type environment is represented.

The 4 T's of Adulthood Development.

ERIC Educational Resources Information Center

Wood, Joanne M.

Although it may be so subtle that it is not noticed or sudden and life altering, adult development occurs in a cycle of four inherent processes: transaction, transition, transformation, and transcendence. These processes exist in a cycle characterized by growth and development. The processes can be defined as follows: (1) transaction--personal,…

Developing Partnerships To Meet Clients' Needs in Changing Government Organizations: A Consultative Process.

ERIC Educational Resources Information Center

Borgen, William A.

2000-01-01

Outlines the development of partnerships across three employment-related government ministries, in a context of organizational restructuring and downsizing. Describes a consultation process regarding effective collaboration to assess unemployed clients' employability needs. In meetings, the workers developed a process that involved the cooperation…

Sustaining Innovation: Developing an Instructional Technology Assessment Process

ERIC Educational Resources Information Center

Carmo, Monica Cristina

2013-01-01

This case study developed an instructional technology assessment process for the Gevirtz Graduate School of Education (GGSE). The theoretical framework of Adelman and Taylor (2001) guided the development of this instructional technology assessment process and the tools to aid in its facilitation. GGSE faculty, staff, and graduate students…

24 CFR 291.304 - Bidding process.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 24 Housing and Urban Development 2 2011-04-01 2011-04-01 false Bidding process. 291.304 Section 291.304 Housing and Urban Development Regulations Relating to Housing and Urban Development (Continued... Family Mortgage Loans § 291.304 Bidding process. (a) Submission of bids. All bids must be submitted to...

Developing a taxonomy for mission architecture definition

NASA Technical Reports Server (NTRS)

Neubek, Deborah J.

1990-01-01

The Lunar and Mars Exploration Program Office (LMEPO) was tasked to define candidate architectures for the Space Exploration Initiative to submit to NASA senior management and an externally constituted Outreach Synthesis Group. A systematic, structured process for developing, characterizing, and describing the alternate mission architectures, and applying this process to future studies was developed. The work was done in two phases: (1) national needs were identified and categorized into objectives achievable by the Space Exploration Initiative; and (2) a program development process was created which both hierarchically and iteratively describes the program planning process.

Final Report - Energy Reduction and Advanced Water Removal via Membrane Solvent Extraction Technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Reed, John; Fanselow, Dan; Abbas, Charles

2014-08-06

3M and Archer Daniels Midland (ADM) collaborated with the U.S. Department of Energy (DOE) to develop and demonstrate a novel membrane solvent extraction (MSE) process that can substantially reduce energy and water consumption in ethanol production, and accelerate the fermentation process. A cross-flow membrane module was developed, using porous membrane manufactured by 3M. A pilot process was developed that integrates fermentation, MSE and vacuum distillation. Extended experiments of 48-72 hours each were conducted to develop the process, verify its performance and begin establishing commercial viability.

The Use of the Nursing Process in Spain as Compared to the United States and Canada.

PubMed

Huitzi-Egilegor, Joseba Xabier; Elorza-Puyadena, Maria Isabel; Asurabarrena-Iraola, Carmen

2017-05-18

To analyze the development of the nursing method process in Spain, and compare it with the development in the United States and Canada. This is a narrative review. The teaching of the nursing process in nursing schools started in Spain as from 1977 and that it started being used in professional practice in the 1990's. The development, the difficulties, the nursing models used and its application form are discussed. The development of the nursing process in the United States and Canada started to happen in Spain about 15-20 years later and, today, is a reality. Cross-sectional studies are needed to determine the changes in the development of the nursing process in Spain. © 2017 NANDA International, Inc.

The developmental processes for NANDA International Nursing Diagnoses.

PubMed

Scroggins, Leann M

2008-01-01

This study aims to provide a step-by-step procedural guideline for the development of a nursing diagnosis that meets the necessary criteria for inclusion in the NANDA International and NNN classification systems. The guideline is based on the processes developed by the Diagnosis Development Committee of NANDA International and includes the necessary processes for development of Actual, Wellness, Health Promotion, and Risk nursing diagnoses. Definitions of Actual, Wellness, Health Promotion, and Risk nursing diagnoses along with inclusion criteria and taxonomy rules have been incorporated into the guideline to streamline the development and review processes for submitted diagnoses. A step-by-step procedural guideline will assist the submitter to move efficiently and effectively through the submission process, resulting in increased submissions and enhancement of the NANDA International and NNN classification systems.

Facilitating Behavior Change With Low-literacy Patient Education Materials

PubMed Central

Seligman, Hilary K.; Wallace, Andrea S.; DeWalt, Darren A.; Schillinger, Dean; Arnold, Connie L.; Shilliday, Betsy Bryant; Delgadillo, Adriana; Bengal, Nikki; Davis, Terry C.

2014-01-01

Objective To describe a process for developing low-literacy health education materials that increase knowledge and activate patients toward healthier behaviors. Methods We developed a theoretically informed process for developing educational materials. This process included convening a multidisciplinary creative team, soliciting stakeholder input, identifying key concepts to be communicated, mapping concepts to a behavioral theory, creating a supporting behavioral intervention, designing and refining materials, and assessing efficacy. Results We describe the use of this process to develop a diabetes self-management guide. Conclusions Developing low-literacy health education materials that will activate patients toward healthier behaviors requires attention to factors beyond reading level. PMID:17931139

Computer-aided software development process design

NASA Technical Reports Server (NTRS)

Lin, Chi Y.; Levary, Reuven R.

1989-01-01

The authors describe an intelligent tool designed to aid managers of software development projects in planning, managing, and controlling the development process of medium- to large-scale software projects. Its purpose is to reduce uncertainties in the budget, personnel, and schedule planning of software development projects. It is based on dynamic model for the software development and maintenance life-cycle process. This dynamic process is composed of a number of time-varying, interacting developmental phases, each characterized by its intended functions and requirements. System dynamics is used as a modeling methodology. The resulting Software LIfe-Cycle Simulator (SLICS) and the hybrid expert simulation system of which it is a subsystem are described.

Application of high-throughput mini-bioreactor system for systematic scale-down modeling, process characterization, and control strategy development.

PubMed

Janakiraman, Vijay; Kwiatkowski, Chris; Kshirsagar, Rashmi; Ryll, Thomas; Huang, Yao-Ming

2015-01-01

High-throughput systems and processes have typically been targeted for process development and optimization in the bioprocessing industry. For process characterization, bench scale bioreactors have been the system of choice. Due to the need for performing different process conditions for multiple process parameters, the process characterization studies typically span several months and are considered time and resource intensive. In this study, we have shown the application of a high-throughput mini-bioreactor system viz. the Advanced Microscale Bioreactor (ambr15(TM) ), to perform process characterization in less than a month and develop an input control strategy. As a pre-requisite to process characterization, a scale-down model was first developed in the ambr system (15 mL) using statistical multivariate analysis techniques that showed comparability with both manufacturing scale (15,000 L) and bench scale (5 L). Volumetric sparge rates were matched between ambr and manufacturing scale, and the ambr process matched the pCO2 profiles as well as several other process and product quality parameters. The scale-down model was used to perform the process characterization DoE study and product quality results were generated. Upon comparison with DoE data from the bench scale bioreactors, similar effects of process parameters on process yield and product quality were identified between the two systems. We used the ambr data for setting action limits for the critical controlled parameters (CCPs), which were comparable to those from bench scale bioreactor data. In other words, the current work shows that the ambr15(TM) system is capable of replacing the bench scale bioreactor system for routine process development and process characterization. © 2015 American Institute of Chemical Engineers.

24 CFR 3288.110 - Alternative Process agreements.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 24 Housing and Urban Development 5 2010-04-01 2010-04-01 false Alternative Process agreements... HOUSING AND URBAN DEVELOPMENT MANUFACTURED HOME DISPUTE RESOLUTION PROGRAM Alternative Process in HUD-Administered States § 3288.110 Alternative Process agreements. (a) Required agreement. To use the Alternative...

Advanced Research Deposition System (ARDS) for processing CdTe solar cells

NASA Astrophysics Data System (ADS)

Barricklow, Keegan Corey

CdTe solar cells have been commercialized at the Gigawatt/year level. The development of volume manufacturing processes for next generation CdTe photovoltaics (PV) with higher efficiencies requires research systems with flexibility, scalability, repeatability and automation. The Advanced Research Deposition Systems (ARDS) developed by the Materials Engineering Laboratory (MEL) provides such a platform for the investigation of materials and manufacturing processes necessary to produce the next generation of CdTe PV. Limited by previous research systems, the ARDS was developed to provide process and hardware flexibility, accommodating advanced processing techniques, and capable of producing device quality films. The ARDS is a unique, in-line process tool with nine processing stations. The system was designed, built and assembled at the Materials Engineering Laboratory. Final assembly, startup, characterization and process development are the focus of this research. Many technical challenges encountered during the startup of the ARDS were addressed in this research. In this study, several hardware modifications needed for the reliable operation of the ARDS were designed, constructed and successfully incorporated into the ARDS. The effect of process condition on film properties for each process step was quantified. Process development to achieve 12% efficient baseline solar cell required investigation of discrete processing steps, troubleshooting process variation, and developing performance correlations. Subsequent to this research, many advances have been demonstrated with the ARDS. The ARDS consistently produces devices of 12% +/-.5% by the process of record (POR). The champion cell produced to date utilizing the ARDS has an efficiency of 16.2% on low cost commercial sodalime glass and utilizes advanced films. The ARDS has enabled investigation of advanced concepts for processing CdTe devices including, Plasma Cleaning, Plasma Enhanced Closed Space Sublimation (PECSS), Electron Reflector (ER) using Cd1-xMgxTe (CMT) structure and alternative device structures. The ARDS has been instrumental in the collaborative research with many institutions.

Bockron as a Medium of Learning in The Process of Inquiry based Learning to Improve Science Process Skills of Junior High School Students in Growth and Development Concept

NASA Astrophysics Data System (ADS)

Mayasari, D.

2017-02-01

Investigative research on Influence of bockron as a medium of learning in process of inquiry-based learning to the development of science process skills on the concept of growth and development. This research was done in an effort to follow up underdeveloped skills of observing, communicating andconclude on students. This research was conducted using classroom action research (PTK), which consisted of 3 cycles. Cycle 1 students observe differences in growth and development, cycle 2 students measure the growth rate, cycle 3 students observe factors that influence growth and development, In these three cycles is used as a planting medium bocron (bottles and dacron). It involves 8th grade junior high-school students of 14-15 years old as research subjects in six meetings. Indicators of process skill include observation, communication, interpretation and inference. Data is collected through students’ work sheets, written tests and observation. Processing of the data to see N-Gain used Microsoft Excel 2007, and the results showed that an increase in science process skills with a value of medium N-Gain (0,63). Bokron learning medium easily and cheaply obtainable around the students, particularly those in urban areas is quite difficult to get land to be used as aplanting medium. In addition to observation of growth and development, bokron media can also be used to observe the motion in plants. The use bokron as a learning medium can train and develop science process skills, attitude and scientific method also gives students concrete experience of the process of growth and development in plants.

[Research advances in secondary development of Chinese patent medicines based on quality by design concept].

PubMed

Gong, Xing-Chu; Chen, Teng; Qu, Hai-Bin

2017-03-01

Quality by design (QbD) concept is an advanced pharmaceutical quality control concept. The application of QbD concept in the research and development of pharmaceutical processes of traditional Chinese medicines (TCM) mainly contains five parts, including the definition of critical processes and their evaluation criteria, the determination of critical process parameters and critical material attributes, the establishment of quantitative models, the development of design space, as well as the application and continuous improvement of control strategy. In this work, recent research advances in QbD concept implementation methods in the secondary development of Chinese patent medicines were reviewed, and five promising fields of the implementation of QbD concept were pointed out, including the research and development of TCM new drugs and Chinese medicine granules for formulation, modeling of pharmaceutical processes, development of control strategy based on industrial big data, strengthening the research of process amplification rules, and the development of new pharmaceutical equipment.. Copyright© by the Chinese Pharmaceutical Association.

Children's episodic memory.

PubMed

Ghetti, Simona; Lee, Joshua

2011-07-01

Episodic memory develops during childhood and adolescence. This trajectory depends on several underlying processes. In this article, we first discuss the development of the basic binding processes (e.g., the processes by which elements are bound together to form a memory episode) and control processes (e.g., reasoning and metamemory processes) involved in episodic remembering. Then, we discuss the role of these processes in false-memory formation. In the subsequent sections, we examine the neural substrates of the development of episodic memory. Finally, we discuss atypical development of episodic memory. As we proceed through the article, we suggest potential avenues for future research. WIREs Cogni Sci 2011 2 365-373 DOI: 10.1002/wcs.114 For further resources related to this article, please visit the WIREs website. Copyright © 2010 John Wiley & Sons, Ltd.

Flexible, secure agent development framework

DOEpatents

Goldsmith,; Steven, Y [Rochester, MN

2009-04-07

While an agent generator is generating an intelligent agent, it can also evaluate the data processing platform on which it is executing, in order to assess a risk factor associated with operation of the agent generator on the data processing platform. The agent generator can retrieve from a location external to the data processing platform an open site that is configurable by the user, and load the open site into an agent substrate, thereby creating a development agent with code development capabilities. While an intelligent agent is executing a functional program on a data processing platform, it can also evaluate the data processing platform to assess a risk factor associated with performing the data processing function on the data processing platform.

Risk management in medical product development process using traditional FMEA and fuzzy linguistic approach: a case study

NASA Astrophysics Data System (ADS)

Kirkire, Milind Shrikant; Rane, Santosh B.; Jadhav, Jagdish Rajaram

2015-12-01

Medical product development (MPD) process is highly multidisciplinary in nature, which increases the complexity and the associated risks. Managing the risks during MPD process is very crucial. The objective of this research is to explore risks during MPD in a dental product manufacturing company and propose a model for risk mitigation during MPD process to minimize failure events. A case study approach is employed. The existing MPD process is mapped with five phases of the customized phase gate process. The activities during each phase of development and risks associated with each activity are identified and categorized based on the source of occurrence. The risks are analyzed using traditional Failure mode and effect analysis (FMEA) and fuzzy FMEA. The results of two methods when compared show that fuzzy approach avoids the duplication of RPNs and helps more to convert cognition of experts into information to get values of risk factors. The critical, moderate, low level and negligible risks are identified based on criticality; risk treatments and mitigation model are proposed. During initial phases of MPD, the risks are less severe, but as the process progresses the severity of risks goes on increasing. The MPD process should be critically designed and simulated to minimize the number of risk events and their severity. To successfully develop the products/devices within the manufacturing companies, the process risk management is very essential. A systematic approach to manage risks during MPD process will lead to the development of medical products with expected quality and reliability. This is the first research of its kind having focus on MPD process risks and its management. The methodology adopted in this paper will help the developers, managers and researchers to have a competitive edge over the other companies by managing the risks during the development process.

Optimization of a novel enzyme treatment process for early-stage processing of sheepskins.

PubMed

Lim, Y F; Bronlund, J E; Allsop, T F; Shilton, A N; Edmonds, R L

2010-01-01

An enzyme treatment process for early-stage processing of sheepskins has been previously reported by the Leather and Shoe Research Association of New Zealand (LASRA) as an alternative to current industry operations. The newly developed process had marked benefits over conventional processing in terms of a lowered energy usage (73%), processing time (47%) as well as water use (49%), but had been developed as a "proof of principle''. The objective of this work was to develop the process further to a stage ready for adoption by industry. Mass balancing was used to investigate potential modifications for the process based on the understanding developed from a detailed analysis of preliminary design trials. Results showed that a configuration utilising a 2 stage counter-current system for the washing stages and segregation and recycling of enzyme float prior to dilution in the neutralization stage was a significant improvement. Benefits over conventional processing include a reduction of residual TDS by 50% at the washing stages and 70% savings on water use overall. Benefits over the un-optimized LASRA process are reduction of solids in product after enzyme treatment and neutralization stages by 30%, additional water savings of 21%, as well as 10% savings of enzyme usage.

Incorporating consideration of health impacts into land use development approval processes: Development of a Health Background Study Framework.

PubMed

Moloughney, Brent W; Bursey, Gayle E; Neumann, Jana; Leeming, Daniel H; Gutmann, Christine E; Sivanand, Bhavna; Mowat, David L

2014-09-12

This project involved development of a Health Background Study (HBS) Framework to support consideration of health impacts within municipalities' approval process for land use development. Peel Public Health and Toronto Public Health led the project with the participation of planners, urban designers, engineers, public health staff and development industry representatives. Historical growth in the Region of Peel and suburban Toronto has resulted in extensive low-density development, creating car-dependent communities with disconnected streets and segregated land uses. The inclusion of an HBS in developers' applications to municipalities is one approach by which health-related expectations for the built environment can be established within the approval process. Development of the HBS Framework used the six core elements of the built environment with the strongest evidence for impact on health and was informed by analysis of the provincial and local policy contexts, practices of other municipalities and stakeholder interviews. The Framework's contents were refined according to feedback from multidisciplinary stakeholder workshops. The HBS Framework identifies minimum standards for built environment core elements that developers need to address in their applications. The Framework was created to be simple and instructive with applicability to a range of development locations and scales, and to various stages of the development approval process. Peel Public Health is leading several initiatives to support the use of the HBS as a part of the development application process. The HBS Framework is a tool that public health and planning can use to support the consideration of health impacts within municipalities' land use development processes.

Low-cost Solar Array Project. Feasibility of the Silane Process for Producing Semiconductor-grade Silicon

NASA Technical Reports Server (NTRS)

1979-01-01

The feasibility of Union Carbide's silane process for commercial application was established. An integrated process design for an experimental process system development unit and a commercial facility were developed. The corresponding commercial plant economic performance was then estimated.

Capability Maturity Model (CMM) for Software Process Improvements

NASA Technical Reports Server (NTRS)

Ling, Robert Y.

2000-01-01

This slide presentation reviews the Avionic Systems Division's implementation of the Capability Maturity Model (CMM) for improvements in the software development process. The presentation reviews the process involved in implementing the model and the benefits of using CMM to improve the software development process.

Flat-plate solar array project: Experimental process system development unit for producing semiconductor-grade silicon using the silane-to-silicon process

NASA Technical Reports Server (NTRS)

1981-01-01

The engineering design, fabrication, assembly, operation, economic analysis, and process support research and development for an Experimental Process System Development Unit for producing semiconductor-grade silicon using the slane-to-silicon process are reported. The design activity was completed. About 95% of purchased equipment was received. The draft of the operations manual was about 50% complete and the design of the free-space system continued. The system using silicon power transfer, melting, and shotting on a psuedocontinuous basis was demonstrated.

Reasoning with case histories of process knowledge for efficient process development

NASA Technical Reports Server (NTRS)

Bharwani, Seraj S.; Walls, Joe T.; Jackson, Michael E.

1988-01-01

The significance of compiling case histories of empirical process knowledge and the role of such histories in improving the efficiency of manufacturing process development is discussed in this paper. Methods of representing important investigations as cases and using the information from such cases to eliminate redundancy of empirical investigations in analogous process development situations are also discussed. A system is proposed that uses such methods to capture the problem-solving framework of the application domain. A conceptual design of the system is presented and discussed.

EFG Ribbon Technology

NASA Astrophysics Data System (ADS)

Schwirtlich, I. A.

Since the beginning of solar cell development based on crystalline silicon, there have been efforts to produce wafers directly from the melt instead of through crystallization of ingots. Ingots require slicing into the blocs and wafers which form the basis of solar cells. In the last 30 years, several dozen processes have been published that describe a variety of concepts. Only few of these processes could be developed to an acceptable degree of technical maturity. Among those successful technologies are the Dendritic Web process, the Edge Supported Pulling (ESP) process and the Edge-Defined-Film-Fed-Growth (EFG) process. The EFG Process was originally developed by Mobil Solar and, since the mid-1990s, belongs to SCHOTT Solar GmbH and its predecessors, respectively. The Ribbon Growth on Substrate (RGS) process was originally developed by Bayer AG and is now in a pilot project at the ECN, Petten. Considering the past 20 to 30 years, the EFG process has reached the most advanced state in terms of industrialization.

A mathematical study of a random process proposed as an atmospheric turbulence model

NASA Technical Reports Server (NTRS)

Sidwell, K.

1977-01-01

A random process is formed by the product of a local Gaussian process and a random amplitude process, and the sum of that product with an independent mean value process. The mathematical properties of the resulting process are developed, including the first and second order properties and the characteristic function of general order. An approximate method for the analysis of the response of linear dynamic systems to the process is developed. The transition properties of the process are also examined.

Reports of Planetary Geology Program, 1982

NASA Technical Reports Server (NTRS)

Holt, H. E. (Compiler)

1982-01-01

Work conducted in the Planetary Geology program is summarized. The following categories are presented: outer solar system satellites; asteroids and comets; Venus; cratering processes and landform development; volcanic processes and landforms; aolian processes and landforms; fluvial processes and landform development; periglacial and permafrost processes; structure, tectonics and stratigraphy; remote sensing and regolith studies; geologic mapping, cartography and geodesy.

Development of functionally-oriented technological processes of electroerosive processing

NASA Astrophysics Data System (ADS)

Syanov, S. Yu

2018-03-01

The stages of the development of functionally oriented technological processes of electroerosive processing from the separation of the surfaces of parts and their service functions to the determination of the parameters of the process of electric erosion, which will provide not only the quality parameters of the surface layer, but also the required operational properties, are described.

19 CFR 10.178 - Direct costs of processing operations performed in the beneficiary developing country.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 1 2011-04-01 2011-04-01 false Direct costs of processing operations performed in... processing operations performed in the beneficiary developing country. (a) Items included in the direct costs of processing operations. As used in § 10.176, the words “direct costs of processing operations...

System Engineering Processes at Kennedy Space Center for Development of the SLS and Orion Launch Systems

NASA Technical Reports Server (NTRS)

Schafer, Eric J.

2012-01-01

There are over 40 subsystems being developed for the future SLS and Orion Launch Systems at Kennedy Space Center. These subsystems developed at the Kennedy Space Center Engineering Directorate follow a comprehensive design process which requires several different product deliverables during each phase of each of the subsystems. This Paper describes this process and gives an example of where the process has been applied.

Development of shared decision-making resources to help inform difficult healthcare decisions: An example focused on dysvascular partial foot and transtibial amputations.

PubMed

Quigley, Matthew; Dillon, Michael P; Fatone, Stefania

2018-02-01

Shared decision making is a consultative process designed to encourage patient participation in decision making by providing accurate information about the treatment options and supporting deliberation with the clinicians about treatment options. The process can be supported by resources such as decision aids and discussion guides designed to inform and facilitate often difficult conversations. As this process increases in use, there is opportunity to raise awareness of shared decision making and the international standards used to guide the development of quality resources for use in areas of prosthetic/orthotic care. To describe the process used to develop shared decision-making resources, using an illustrative example focused on decisions about the level of dysvascular partial foot amputation or transtibial amputation. Development process: The International Patient Decision Aid Standards were used to guide the development of the decision aid and discussion guide focused on decisions about the level of dysvascular partial foot amputation or transtibial amputation. Examples from these shared decision-making resources help illuminate the stages of development including scoping and design, research synthesis, iterative development of a prototype, and preliminary testing with patients and clinicians not involved in the development process. Lessons learnt through the process, such as using the International Patient Decision Aid Standards checklist and development guidelines, may help inform others wanting to develop similar shared decision-making resources given the applicability of shared decision making to many areas of prosthetic-/orthotic-related practice. Clinical relevance Shared decision making is a process designed to guide conversations that help patients make an informed decision about their healthcare. Raising awareness of shared decision making and the international standards for development of high-quality decision aids and discussion guides is important as the approach is introduced in prosthetic-/orthotic-related practice.

Life-Span Learning: A Developmental Perspective

ERIC Educational Resources Information Center

Thornton, James E.

2003-01-01

The article discusses learning as embedded processes of development and aging, and as social activity over the life course. The concept of life-span learning is proposed and outlined to discuss these processes as aspects of and propositions in life-span development and aging theory. Life-span learning processes arise and continuously develop in a…

42 CFR 137.295 - May Self-Governance Tribes elect to develop their own environmental review process?

Code of Federal Regulations, 2011 CFR

2011-10-01

... own environmental review process? Yes, Self-Governance Tribes may develop their own environmental... 42 Public Health 1 2011-10-01 2011-10-01 false May Self-Governance Tribes elect to develop their own environmental review process? 137.295 Section 137.295 Public Health PUBLIC HEALTH SERVICE...

75 FR 41452 - Withdrawal of the Environmental Impact Statement (EIS) Development Process for the Proposed...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-16

... DEPARTMENT OF DEFENSE Department of the Army, Corps of Engineers Withdrawal of the Environmental Impact Statement (EIS) Development Process for the Proposed Beluga to Fairbanks (B2F) Natural Gas... discontinuing the EIS development process associated with the proposed B2F pipeline. FOR FURTHER INFORMATION...

78 FR 23550 - Department of Energy's (DOE) Participation in Development of the International Energy...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-19

...: Notice. SUMMARY: The DOE participates in the code development process of the International Code Council... notice outlines the process by which DOE produces code change proposals, and participates in the ICC code development process. FOR FURTHER INFORMATION CONTACT: Jeremiah Williams, U.S. Department of Energy, Office of...

This Is How We Do It: A Glimpse at Gamelab's Design Process

ERIC Educational Resources Information Center

Daer, Alice J.

2010-01-01

This article explicates the ways that developers working at an independent game company in New York City organized their development process around a deep concern for how players make meaning from their games. Two designers' descriptions of their processes are used to illustrate the company's commitment to developing games that invite…

Sensori-Motor Experience Leads to Changes in Visual Processing in the Developing Brain

ERIC Educational Resources Information Center

James, Karin Harman

2010-01-01

Since Broca's studies on language processing, cortical functional specialization has been considered to be integral to efficient neural processing. A fundamental question in cognitive neuroscience concerns the type of learning that is required for functional specialization to develop. To address this issue with respect to the development of neural…

The Development of Reading for Comprehension: An Information Processing Analysis. Final Report.

ERIC Educational Resources Information Center

Schadler, Margaret; Juola, James F.

This report summarizes research performed at the Universtiy of Kansas that involved several topics related to reading and learning to read, including the development of automatic word recognition processes, reading for comprehension, and the development of new computer technologies designed to facilitate the reading process. The first section…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Simpson, L.; Britt, J.; Birkmire, R.

ITN Energy Systems, Inc., and Global Solar Energy, Inc., assisted by NREL's PV Manufacturing R&D program, have continued to advance CIGS production technology by developing trajectory-oriented predictive/control models, fault-tolerance control, control platform development, in-situ sensors, and process improvements. Modeling activities included developing physics-based and empirical models for CIGS and sputter-deposition processing, implementing model-based control, and applying predictive models to the construction of new evaporation sources and for control. Model-based control is enabled by implementing reduced or empirical models into a control platform. Reliability improvement activities include implementing preventive maintenance schedules; detecting failed sensors/equipment and reconfiguring to tinue processing; and systematicmore » development of fault prevention and reconfiguration strategies for the full range of CIGS PV production deposition processes. In-situ sensor development activities have resulted in improved control and indicated the potential for enhanced process status monitoring and control of the deposition processes. Substantial process improvements have been made, including significant improvement in CIGS uniformity, thickness control, efficiency, yield, and throughput. In large measure, these gains have been driven by process optimization, which in turn have been enabled by control and reliability improvements due to this PV Manufacturing R&D program.« less

Engineering Change Management Method Framework in Mechanical Engineering

NASA Astrophysics Data System (ADS)

Stekolschik, Alexander

2016-11-01

Engineering changes make an impact on different process chains in and outside the company, and lead to most error costs and time shifts. In fact, 30 to 50 per cent of development costs result from technical changes. Controlling engineering change processes can help us to avoid errors and risks, and contribute to cost optimization and a shorter time to market. This paper presents a method framework for controlling engineering changes at mechanical engineering companies. The developed classification of engineering changes and accordingly process requirements build the basis for the method framework. The developed method framework comprises two main areas: special data objects managed in different engineering IT tools and process framework. Objects from both areas are building blocks that can be selected to the overall business process based on the engineering process type and change classification. The process framework contains steps for the creation of change objects (both for overall change and for parts), change implementation, and release. Companies can select singleprocess building blocks from the framework, depending on the product development process and change impact. The developed change framework has been implemented at a division (10,000 employees) of a big German mechanical engineering company.

Managing the Public Sector Research and Development Portfolio Selection Process: A Case Study of Quantitative Selection and Optimization

DTIC Science & Technology

2016-09-01

PUBLIC SECTOR RESEARCH & DEVELOPMENT PORTFOLIO SELECTION PROCESS: A CASE STUDY OF QUANTITATIVE SELECTION AND OPTIMIZATION by Jason A. Schwartz...PUBLIC SECTOR RESEARCH & DEVELOPMENT PORTFOLIO SELECTION PROCESS: A CASE STUDY OF QUANTITATIVE SELECTION AND OPTIMIZATION 5. FUNDING NUMBERS 6...describing how public sector organizations can implement a research and development (R&D) portfolio optimization strategy to maximize the cost

DOE Office of Scientific and Technical Information (OSTI.GOV)

Eshraghi, Ray

In September 2008, the U.S. Department of Energy and Martin County Economic Development Corporation entered into an agreement to further the advancement of a microtubular PEM fuel cell developed by Microcell Corporation. The overall focus of this project was on research and development related to high volume manufacturing of fuel cells and cost reduction in the fuel cell manufacturing process. The extrusion process used for the microfiber fuel cells in this project is inherently a low cost, high volume, high speed manufacturing process. In order to take advantage of the capabilities that the extrusion process provides, all subsequent manufacturing processesmore » must be enhanced to meet the extrusion line’s speed and output. Significant research and development was completed on these subsequent processes to ensure that power output and performance were not negatively impacted by the higher speeds, design changes and process improvements developed in this project. All tasks were successfully completed resulting in cost reductions, performance improvements and process enhancements in the areas of speed and quality. These results support the Department of Energy’s goal of fuel cell commercialization.« less

KSC Shuttle ground turnaround evaluation

NASA Technical Reports Server (NTRS)

Ragusa, J. M.

1983-01-01

Payload/mission development, processing flows, facilities/systems, and the various environments to which a payload is exposed during ground processing are described. These considerations are important for payload design and ground processing requirements development.

Rapid process development of chromatographic process using direct analysis in real time mass spectrometry as a process analytical technology tool.

PubMed

Yan, Binjun; Chen, Teng; Xu, Zhilin; Qu, Haibin

2014-06-01

The concept of quality by design (QbD) is widely applied in the process development of pharmaceuticals. However, the additional cost and time have caused some resistance about QbD implementation. To show a possible solution, this work proposed a rapid process development method, which used direct analysis in real time mass spectrometry (DART-MS) as a process analytical technology (PAT) tool for studying the chromatographic process of Ginkgo biloba L., as an example. The breakthrough curves were fast determined by DART-MS at-line. A high correlation coefficient of 0.9520 was found between the concentrations of ginkgolide A determined by DART-MS and HPLC. Based on the PAT tool, the impacts of process parameters on the adsorption capacity were discovered rapidly, which showed a decreased adsorption capacity with the increase of the flow rate. This work has shown the feasibility and advantages of integrating PAT into QbD implementation for rapid process development. Copyright © 2014 Elsevier B.V. All rights reserved.

A ten-step process to develop case management plans.

PubMed

Tahan, Hussein A

2002-01-01

The use of case management plans has contained cost and improved quality of care successfully. However, the process of developing these plans remains a great challenge for healthcare executives, in this article, the author presents the answer to this challenge by discussing a 10-step formal process that administrators of patient care services and case managers can adapt to their institutions. It also can be used by interdisciplinary team members as a practical guide to develop a specific case management plan. This process is applicable to any care setting (acute, ambulatory, long term, and home care), diagnosis, or procedure. It is particularly important for those organizations that currently do not have a deliberate and systematic process to develop case management plans and are struggling with how to improve the efficiency and productivity of interdisciplinary teams charged with developing case management plans.

The software development process at the Chandra X-ray Center

NASA Astrophysics Data System (ADS)

Evans, Janet D.; Evans, Ian N.; Fabbiano, Giuseppina

2008-08-01

Software development for the Chandra X-ray Center Data System began in the mid 1990's, and the waterfall model of development was mandated by our documents. Although we initially tried this approach, we found that a process with elements of the spiral model worked better in our science-based environment. High-level science requirements are usually established by scientists, and provided to the software development group. We follow with review and refinement of those requirements prior to the design phase. Design reviews are conducted for substantial projects within the development team, and include scientists whenever appropriate. Development follows agreed upon schedules that include several internal releases of the task before completion. Feedback from science testing early in the process helps to identify and resolve misunderstandings present in the detailed requirements, and allows review of intangible requirements. The development process includes specific testing of requirements, developer and user documentation, and support after deployment to operations or to users. We discuss the process we follow at the Chandra X-ray Center (CXC) to develop software and support operations. We review the role of the science and development staff from conception to release of software, and some lessons learned from managing CXC software development for over a decade.

Development and evaluation of low cost honey heating-cum-filtration system.

PubMed

Alam, Md Shafiq; Sharma, D K; Sehgal, V K; Arora, M; Bhatia, S

2014-11-01

A fully mechanized honey heating-cum-filtration system was designed, developed, fabricated and evaluated for its performance. The system comprised of two sections; the top heating section and the lower filtering section. The developed system was evaluated for its performance at different process conditions (25 kg and 50 kg capacity using processing condition: 50 °C heating temperature and 60 °C heating temperature with 20 and 40 min holding time, respectively) and it was found that the total time required for heating, holding and filtration of honey was 108 and 142 min for 25 kg and 50 kg capacity of machine, respectively, irrespective of the processing conditions. The optimum capacity of the system was found to be 50 kg and it involved an investment of Rs 40,000 for its fabrication. The honey filtered through the developed filtration system was compared with the honey filtered in a high cost honey processing plant and raw honey for its microbial and biochemical (reducing sugars (%), moisture, acidity and pH) quality attributes. It was observed that the process of filtering through the developed unit resulted in reduction of microbes. The microbiological quality of honey filtered through the developed filtration system was better than that of raw honey and commercially processed honey. The treatment conditions found best in context of microbiological counts were 60 °C temperature for 20 min. There was 1.97 fold reductions in the plate count and 2.14 reductions in the fungal count of honey processed through the developed filtration system as compared to the raw honey. No coliforms were found in the processed honey. Honey processed through developed unit witnessed less moisture content, acidity and more reducing sugars as compared to raw honey, whereas its quality was comparable to the commercially processed honey.

Application of process mapping to understand integration of high risk medicine care bundles within community pharmacy practice.

PubMed

Weir, Natalie M; Newham, Rosemary; Corcoran, Emma D; Ali Atallah Al-Gethami, Ashwag; Mohammed Abd Alridha, Ali; Bowie, Paul; Watson, Anne; Bennie, Marion

2017-11-21

The Scottish Patient Safety Programme - Pharmacy in Primary Care collaborative is a quality improvement initiative adopting the Institute of Healthcare Improvement Breakthrough Series collaborative approach. The programme developed and piloted High Risk Medicine (HRM) Care Bundles (CB), focused on warfarin and non-steroidal anti-inflammatories (NSAIDs), within 27 community pharmacies over 4 NHS Regions. Each CB involves clinical assessment and patient education, although the CB content varies between regions. To support national implementation, this study aims to understand how the pilot pharmacies integrated the HRM CBs into routine practice to inform the development of a generic HRM CB process map. Regional process maps were developed in 4 pharmacies through simulation of the CB process, staff interviews and documentation of resources. Commonalities were collated to develop a process map for each HRM, which were used to explore variation at a national event. A single, generic process map was developed which underwent validation by case study testing. The findings allowed development of a generic process map applicable to warfarin and NSAID CB implementation. Five steps were identified as required for successful CB delivery: patient identification; clinical assessment; pharmacy CB prompt; CB delivery; and documentation. The generic HRM CB process map encompasses the staff and patients' journey and the CB's integration into routine community pharmacy practice. Pharmacist involvement was required only for clinical assessment, indicating suitability for whole-team involvement. Understanding CB integration into routine practice has positive implications for successful implementation. The generic process map can be used to develop targeted resources, and/or be disseminated to facilitate CB delivery and foster whole team involvement. Similar methods could be utilised within other settings, to allow those developing novel services to distil the key processes and consider their integration within routine workflows to effect maximal, efficient implementation and benefit to patient care. Copyright © 2017 Elsevier Inc. All rights reserved.

Analytical method for promoting process capability of shock absorption steel.

PubMed

Sung, Wen-Pei; Shih, Ming-Hsiang; Chen, Kuen-Suan

2003-01-01

Mechanical properties and low cycle fatigue are two factors that must be considered in developing new type steel for shock absorption. Process capability and process control are significant factors in achieving the purpose of research and development programs. Often-used evaluation methods failed to measure process yield and process centering; so this paper uses Taguchi loss function as basis to establish an evaluation method and the steps for assessing the quality of mechanical properties and process control of an iron and steel manufacturer. The establishment of this method can serve the research and development and manufacturing industry and lay a foundation in enhancing its process control ability to select better manufacturing processes that are more reliable than decision making by using the other commonly used methods.

The Iterative Design Process in Research and Development: A Work Experience Paper

NASA Technical Reports Server (NTRS)

Sullivan, George F. III

2013-01-01

The iterative design process is one of many strategies used in new product development. Top-down development strategies, like waterfall development, place a heavy emphasis on planning and simulation. The iterative process, on the other hand, is better suited to the management of small to medium scale projects. Over the past four months, I have worked with engineers at Johnson Space Center on a multitude of electronics projects. By describing the work I have done these last few months, analyzing the factors that have driven design decisions, and examining the testing and verification process, I will demonstrate that iterative design is the obvious choice for research and development projects.

An Information System Development Method Combining Business Process Modeling with Executable Modeling and its Evaluation by Prototyping

NASA Astrophysics Data System (ADS)

Okawa, Tsutomu; Kaminishi, Tsukasa; Hirabayashi, Syuichi; Suzuki, Ryo; Mitsui, Hiroyasu; Koizumi, Hisao

The business in the enterprise is closely related with the information system to such an extent that the business activities are difficult without the information system. The system design technique that considers the business process well, and that enables a quick system development is requested. In addition, the demand for the development cost is also severe than before. To cope with the current situation, the modeling technology named BPM(Business Process Management/Modeling)is drawing attention and becoming important as a key technology. BPM is a technology to model business activities as business processes and visualize them to improve the business efficiency. However, a general methodology to develop the information system using the analysis result of BPM doesn't exist, and a few development cases are reported. This paper proposes an information system development method combining business process modeling with executable modeling. In this paper we describe a guideline to support consistency of development and development efficiency and the framework enabling to develop the information system from model. We have prototyped the information system with the proposed method and our experience has shown that the methodology is valuable.

Software-Engineering Process Simulation (SEPS) model

NASA Technical Reports Server (NTRS)

Lin, C. Y.; Abdel-Hamid, T.; Sherif, J. S.

1992-01-01

The Software Engineering Process Simulation (SEPS) model is described which was developed at JPL. SEPS is a dynamic simulation model of the software project development process. It uses the feedback principles of system dynamics to simulate the dynamic interactions among various software life cycle development activities and management decision making processes. The model is designed to be a planning tool to examine tradeoffs of cost, schedule, and functionality, and to test the implications of different managerial policies on a project's outcome. Furthermore, SEPS will enable software managers to gain a better understanding of the dynamics of software project development and perform postmodern assessments.

A review of the silicon material task

NASA Technical Reports Server (NTRS)

Lutwack, R.

1984-01-01

The Silicon Material Task of the Flat-Plate Solar Array Project was assigned the objective of developing the technology for low-cost processes for producing polysilicon suitable for terrestrial solar-cell applications. The Task program comprised sections for process developments for semiconductor-grade and solar-cell-grade products. To provide information for deciding upon process designs, extensive investigations of the effects of impurities on material properties and the performance of cells were conducted. The silane process of the Union Carbide Corporation was carried through several stages of technical and engineering development; a pilot plant was the culmination of this effort. The work to establish silane fluidized-bed technology for a low-cost process is continuing. The advantages of the use of dichlorosilane is a siemens-type were shown by Hemlock Semiconductor Corporation. The development of other processes is described.

High‐Volume Processed, ITO‐Free Superstrates and Substrates for Roll‐to‐Roll Development of Organic Electronics

PubMed Central

Hösel, Markus; Angmo, Dechan; Søndergaard, Roar R.; dos Reis Benatto, Gisele A.; Carlé, Jon E.; Jørgensen, Mikkel

2014-01-01

The fabrication of substrates and superstrates prepared by scalable roll‐to‐roll methods is reviewed. The substrates and superstrates that act as the flexible carrier for the processing of functional organic electronic devices are an essential component, and proposals are made about how the general availability of various forms of these materials is needed to accelerate the development of the field of organic electronics. The initial development of the replacement of indium‐tin‐oxide (ITO) for the flexible carrier materials is described and a description of how roll‐to‐roll processing development led to simplification from an initially complex make‐up to higher performing materials through a more simple process is also presented. This process intensification through process simplification is viewed as a central strategy for upscaling, increasing throughput, performance, and cost reduction. PMID:27980893

A review of the silicon material task

NASA Astrophysics Data System (ADS)

Lutwack, R.

1984-02-01

The Silicon Material Task of the Flat-Plate Solar Array Project was assigned the objective of developing the technology for low-cost processes for producing polysilicon suitable for terrestrial solar-cell applications. The Task program comprised sections for process developments for semiconductor-grade and solar-cell-grade products. To provide information for deciding upon process designs, extensive investigations of the effects of impurities on material properties and the performance of cells were conducted. The silane process of the Union Carbide Corporation was carried through several stages of technical and engineering development; a pilot plant was the culmination of this effort. The work to establish silane fluidized-bed technology for a low-cost process is continuing. The advantages of the use of dichlorosilane is a siemens-type were shown by Hemlock Semiconductor Corporation. The development of other processes is described.

Basic visual perceptual processes in children with typical development and cerebral palsy: The processing of surface, length, orientation, and position.

PubMed

Schmetz, Emilie; Magis, David; Detraux, Jean-Jacques; Barisnikov, Koviljka; Rousselle, Laurence

2018-03-02

The present study aims to assess how the processing of basic visual perceptual (VP) components (length, surface, orientation, and position) develops in typically developing (TD) children (n = 215, 4-14 years old) and adults (n = 20, 20-25 years old), and in children with cerebral palsy (CP) (n = 86, 5-14 years old) using the first four subtests of the Battery for the Evaluation of Visual Perceptual and Spatial processing in children. Experiment 1 showed that these four basic VP processes follow distinct developmental trajectories in typical development. Experiment 2 revealed that children with CP present global and persistent deficits for the processing of basic VP components when compared with TD children matched on chronological age and nonverbal reasoning abilities.

Principles Supporting the Perceptional Teaching of Physics: A ``Practical Teaching Philosophy''

NASA Astrophysics Data System (ADS)

Kurki-Suonio, Kaarle

2011-03-01

This article sketches a framework of ideas developed in the context of decades of physics teacher-education that was entitled the "perceptional approach". Individual learning and the scientific enterprise are interpreted as different manifestations of the same process aimed at understanding the natural and social worlds. The process is understood to possess the basic nature of perception, where empirical meanings are first born and then conceptualised. The accumulation of perceived gestalts in the "structure of the mind" leads to structural perception and the generation of conceptual hierarchies, which form a general principle for the expansion of our understanding. The process undergoes hierarchical development from early sensory perception to individual learning and finally to science. The process is discussed in terms of a three-process dynamic. Scientific and technological processes are driven by the interaction of the mind and nature. They are embedded in the social process due to the interaction of individual minds. These sub-processes are defined by their aims: The scientific process affects the mind and aims at understanding; the technological process affects nature and aims at human well-being; and the social process aims at mutual agreement and cooperation. In hierarchical development the interaction of nature and the mind gets structured into a "methodical cycle" by procedures involving conscious activities. Its intuitive nature is preserved due to subordination of the procedures to empirical meanings. In physics, two dimensions of hierarchical development are distinguished: Unification development gives rise to a generalisation hierarchy of concepts; Quantification development transfers the empirical meanings to quantities, laws and theories representing successive hierarchical levels of quantitative concepts. Consequences for physics teaching are discussed in principle, and in the light of examples and experiences from physics teacher education.

Design, Development and Hotfire Testing of Monolithic Copper and Bimetallic Additively Manufactured Combustion Chambers

NASA Technical Reports Server (NTRS)

Gradl, Paul; Barnett, Greg; Brandsmeier, Will; Greene, Sandy Elam; Protz, Chris

2016-01-01

NASA and industry partners are working towards fabrication process development to reduce costs and schedules associated with manufacturing liquid rocket engine components with the goal of reducing overall mission costs. One such technique being evaluated is powder-bed fusion or selective laser melting (SLM) otherwise commonly referred to as additive manufacturing. The NASA Low Cost Upper Stage Propulsion (LCUSP) program was designed to develop processes and material characterization for the GRCop-84 copper-alloy commensurate with powder bed additive manufacturing, evaluate bimetallic deposition and complete testing of a full scale combustion chamber. As part of this development, the process has been transferred to industry partners to enable a long-term supply chain of monolithic copper combustion chambers. As a direct spin off of this program, NASA is working with industry partners to further develop the printing process for the GRCop-84 material in addition to the C-18150 (CuCrZr) material. To advance the process further and allow for optimization with multiple materials, NASA is also investigating the feasibility of bimetallic additively manufactured chambers. A 1.2k sized thrust-chamber was designed and developed to compare the printing process of the GRCop-84 and C-18150 SLM materials. A series of similar MCC liners also completed development with an Inconel 625 jacket bonded to the GRcop-84 liner evaluating direct metal deposition (DMD) laser and arc-based techniques. This paper describes the design, development, manufacturing and testing of these combustion chambers and associated lessons learned throughout the design and development process.

A Proven Method for Meeting Export Control Objectives in Postal and Shipping Sectors

DTIC Science & Technology

2015-02-01

Mellon University for the operation of the Software Engineering Institute, a federally funded research and development center sponsored by the United...Export Control at USPS 5 3.3 Objectives for Improving Export Screening at USPS 6 4 Development of the New Screening Process 7 4.1 “Walking the Model...Export Screening Development Process 10 Figure 2: Induction and Processing of International Mail 10 Figure 3: The Export Screening Process 11

System Engineering Processes at Kennedy Space Center for Development of SLS and Orion Launch Systems

NASA Technical Reports Server (NTRS)

Schafer, Eric; Stambolian, Damon; Henderson, Gena

2013-01-01

There are over 40 subsystems being developed for the future SLS and Orion Launch Systems at Kennedy Space Center. These subsystems are developed at the Kennedy Space Center Engineering Directorate. The Engineering Directorate at Kennedy Space Center follows a comprehensive design process which requires several different product deliverables during each phase of each of the subsystems. This Presentation describes this process with examples of where the process has been applied.

Exploratory Development on a New Process to Produce Improved RDX crystals: Supercritical Fluid Anti-Solvent Recrystallization

DTIC Science & Technology

1988-05-02

G. and J. Chiovini. Decaffeination Process . U.S. Patent 4,251.559; 17 February 1981. 43. Friedrich, J.P.. G.R. List, and A.J. Leakin. Petroleum...0 CONTRACT REPORT BRL-CR-606 EXPLORATORY DEVELOPMENT ON A NEW PROCESS TO PRODUCE IMPROVED RDX CRYSTALS: SUPERCRITICAL FLUID ANTI-SOLVENT...CCESSION NO. 11. TITLE (icnude Sun• y Uasuihcanon) I . • EXPLORATORY DEVELOPMENT ON A NEW PROCESS TO PRODUCE IMPROVED RDX CRYSTALS: SUPERCRITICAL

The Package-Based Development Process in the Flight Dynamics Division

NASA Technical Reports Server (NTRS)

Parra, Amalia; Seaman, Carolyn; Basili, Victor; Kraft, Stephen; Condon, Steven; Burke, Steven; Yakimovich, Daniil

1997-01-01

The Software Engineering Laboratory (SEL) has been operating for more than two decades in the Flight Dynamics Division (FDD) and has adapted to the constant movement of the software development environment. The SEL's Improvement Paradigm shows that process improvement is an iterative process. Understanding, Assessing and Packaging are the three steps that are followed in this cyclical paradigm. As the improvement process cycles back to the first step, after having packaged some experience, the level of understanding will be greater. In the past, products resulting from the packaging step have been large process documents, guidebooks, and training programs. As the technical world moves toward more modularized software, we have made a move toward more modularized software development process documentation, as such the products of the packaging step are becoming smaller and more frequent. In this manner, the QIP takes on a more spiral approach rather than a waterfall. This paper describes the state of the FDD in the area of software development processes, as revealed through the understanding and assessing activities conducted by the COTS study team. The insights presented include: (1) a characterization of a typical FDD Commercial Off the Shelf (COTS) intensive software development life-cycle process, (2) lessons learned through the COTS study interviews, and (3) a description of changes in the SEL due to the changing and accelerating nature of software development in the FDD.

E-Learning Quality Assurance: A Process-Oriented Lifecycle Model

ERIC Educational Resources Information Center

Abdous, M'hammed

2009-01-01

Purpose: The purpose of this paper is to propose a process-oriented lifecycle model for ensuring quality in e-learning development and delivery. As a dynamic and iterative process, quality assurance (QA) is intertwined with the e-learning development process. Design/methodology/approach: After reviewing the existing literature, particularly…

Development of Pulsed Processes for the Manufacture of Solar Cells

NASA Technical Reports Server (NTRS)

1979-01-01

The development status of the process based upon ion implantation for the introduction of junctions and back surface fields is described. A process sequence is presented employing ion implantation and pulse processing. Efforts to improve throughout and descrease process element costs for furnace annealing are described. Design studies for a modular 3,000 wafer per hour pulse processor are discussed.

Aqueous and pyrochemical reprocessing of actinide fuels

NASA Astrophysics Data System (ADS)

Toth, L. Mac; Bond, Walter D.; Avens, Larry R.

1993-02-01

Processing of the nuclear fuel actinides has developed in two independent directions—aqueous processing and pyroprocessing. Similarities in the two processes, their goals, and restraints are indicated in brief parallel descriptions along with distinguishing advantages and areas of future development. It is suggested that from a technical viewpoint, the ultimate process might be a hybrid which incorporates the best steps of each process.

Collaborative Measurement Development as a Tool in CBPR: Measurement Development and Adaptation within the Cultures of Communities

PubMed Central

Gonzalez, John; Trickett, Edison J.

2014-01-01

This paper describes the processes we engaged in to develop a measurement protocol used to assess the outcomes in a community based suicide and alcohol abuse prevention project with two Alaska Native communities. While the literature on community-based participatory research (CBPR) is substantial regarding the importance of collaborations, few studies have reported on this collaboration in the process of developing measures to assess CBPR projects. We first tell a story of the processes around the standard issues of doing cross-cultural work on measurement development related to areas of equivalence. A second story is provided that highlights how community differences within the same cultural group can affect both the process and content of culturally relevant measurement selection, adaptation, and development. PMID:24748283

Collaborative measurement development as a tool in CBPR: measurement development and adaptation within the cultures of communities.

PubMed

Gonzalez, John; Trickett, Edison J

2014-09-01

This paper describes the processes we engaged into develop a measurement protocol used to assess the outcomes in a community based suicide and alcohol abuse prevention project with two Alaska Native communities. While the literature on community-based participatory research (CBPR) is substantial regarding the importance of collaborations, few studies have reported on this collaboration in the process of developing measures to assess CBPR projects. We first tell a story of the processes around the standard issues of doing cross-cultural work on measurement development related to areas of equivalence. A second story is provided that highlights how community differences within the same cultural group can affect both the process and content of culturally relevant measurement selection, adaptation, and development.

Space experiment development process

NASA Technical Reports Server (NTRS)

Depauw, James F.

1987-01-01

Described is a process for developing space experiments utilizing the Space Shuttle. The role of the Principal Investigator is described as well as the Principal Investigator's relation with the project development team. Described also is the sequence of events from an early definition phase through the steps of hardware development. The major interactions between the hardware development program and the Shuttle integration and safety activities are also shown. The presentation is directed to people with limited Shuttle experiment experience. The objective is to summarize the development process, discuss the roles of major participants, and list some lessons learned. Two points should be made at the outset. First, no two projects are the same so the process varies from case to case. Second, the emphasis here is on Code EN/Microgravity Science and Applications Division (MSAD).

The Use of Multi-Criteria Evaluation and Network Analysis in the Area Development Planning Process

DTIC Science & Technology

2013-03-01

layouts. The alternative layout scoring process, base in multi-criteria evaluation, returns a quantitative score for each alternative layout and a...The purpose of this research was to develop improvements to the area development planning process. These plans are used to improve operations within...an installation sub-section by altering the physical layout of facilities. One methodology was developed based on apply network analysis concepts to

76 FR 81906 - Advance Notice of Proposed Rulemaking Regarding a Competitive Process for Leasing Public Lands...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-29

... Solar and Wind Energy Development AGENCY: Bureau of Land Management. ACTION: Advance notice of proposed... to establish a competitive process for leasing public lands for solar and wind energy development... process for issuing Right-of-Way (ROW) leases for solar and wind energy development that is based upon the...

The Community Development Process: The Rediscovery of Local Initiative.

ERIC Educational Resources Information Center

Biddle, William W.; Biddle, Loureide J.

The development process in two communities, a mining county in rural Appalachia and a deteriorating neighborhood in a northern industrial city, is presented in case-study form. Concepts and commonly used terms are defined; a process of development is identified that can be used in groups small enough to permit attention to the growth of persons.…

Concept Development in Learning Physics: The Case of Electric Current and Voltage Revisited

ERIC Educational Resources Information Center

Koponen, Ismo T.; Huttunen, Laura

2013-01-01

In learning conceptual knowledge in physics, a common problem is the development and differentiation of concepts in the learning process. An important part of this development process is the re-organisation or re-structuring process in which students' conceptual knowledge and concepts change. This study proposes a new view of concept…

Airport Planning and Development Process: Analysis and Documentation Report

DOT National Transportation Integrated Search

1997-01-01

The Federal Aviation Administration (FAA) is facing extreme resource constraints : and increasing demands on the aviation system. The Airport Planning and : Development Process (APDP) links organizations, people, and processes together : to provide c...

Developing the JPL Engineering Processes

NASA Technical Reports Server (NTRS)

Linick, Dave; Briggs, Clark

2004-01-01

This paper briefly recounts the recent history of process reengineering at the NASA Jet Propulsion Laboratory, with a focus on the engineering processes. The JPL process structure is described and the process development activities of the past several years outlined. The main focus of the paper is on the current process structure, the emphasis on the flight project life cycle, the governance approach that lead to Flight Project Practices, and the remaining effort to capture process knowledge at the detail level of the work group.

On the facilitative effects of face motion on face recognition and its development

PubMed Central

Xiao, Naiqi G.; Perrotta, Steve; Quinn, Paul C.; Wang, Zhe; Sun, Yu-Hao P.; Lee, Kang

2014-01-01

For the past century, researchers have extensively studied human face processing and its development. These studies have advanced our understanding of not only face processing, but also visual processing in general. However, most of what we know about face processing was investigated using static face images as stimuli. Therefore, an important question arises: to what extent does our understanding of static face processing generalize to face processing in real-life contexts in which faces are mostly moving? The present article addresses this question by examining recent studies on moving face processing to uncover the influence of facial movements on face processing and its development. First, we describe evidence on the facilitative effects of facial movements on face recognition and two related theoretical hypotheses: the supplementary information hypothesis and the representation enhancement hypothesis. We then highlight several recent studies suggesting that facial movements optimize face processing by activating specific face processing strategies that accommodate to task requirements. Lastly, we review the influence of facial movements on the development of face processing in the first year of life. We focus on infants' sensitivity to facial movements and explore the facilitative effects of facial movements on infants' face recognition performance. We conclude by outlining several future directions to investigate moving face processing and emphasize the importance of including dynamic aspects of facial information to further understand face processing in real-life contexts. PMID:25009517

Multilayer ultra thick resist development for MEMS

NASA Astrophysics Data System (ADS)

Washio, Yasushi; Senzaki, Takahiro; Masuda, Yasuo; Saito, Koji; Obiya, Hiroyuki

2005-05-01

MEMS (Micro-Electro-Mechanical Systems) is achieved through a process technology, called Micro-machining. There are two distinct methods to manufacture a MEMS-product. One method is to form permanent film through photolithography, and the other is to form a non-permanent film resist after photolithography proceeded by etch or plating process. The three-dimensional ultra-fine processing technology based on photolithography, and is assembled by processes, such as anode junction, and post lithography processes such as etching and plating. Currently ORDYL PR-100 (Dry Film Type) is used for the permanent resist process. TOK has developed TMMR S2000 (Liquid Type) and TMMF S2000 (Dry Film Type) also. TOK has developed a new process utilizing these resist. The electro-forming method by photolithography is developed as one of the methods for enabling high resolution and high aspect formation. In recent years, it has become possible to manufacture conventionally difficult multilayer through our development with material and equipment project (M&E). As for material for electro-forming, it was checked that chemically amplified resist is optimal from the reaction mechanism as it is easily removed by the clean solution. Moreover, multiple plating formations were enabled with the resist through a new process. As for the equipment, TOK developed Applicator (It can apply 500 or more μms) and Developer, which achieves high throughput and quality. The detailed plating formations, which a path differs, and air wiring are realizable through M&E. From the above results, opposed to metallic mold plating, electro-forming method by resist, enabled to form high resolution and aspect pattern, at low cost. It is thought that the infinite possibility spreads by applying this process.

Process development of a New Haemophilus influenzae type b conjugate vaccine and the use of mathematical modeling to identify process optimization possibilities.

PubMed

Hamidi, Ahd; Kreeftenberg, Hans; V D Pol, Leo; Ghimire, Saroj; V D Wielen, Luuk A M; Ottens, Marcel

2016-05-01

Vaccination is one of the most successful public health interventions being a cost-effective tool in preventing deaths among young children. The earliest vaccines were developed following empirical methods, creating vaccines by trial and error. New process development tools, for example mathematical modeling, as well as new regulatory initiatives requiring better understanding of both the product and the process are being applied to well-characterized biopharmaceuticals (for example recombinant proteins). The vaccine industry is still running behind in comparison to these industries. A production process for a new Haemophilus influenzae type b (Hib) conjugate vaccine, including related quality control (QC) tests, was developed and transferred to a number of emerging vaccine manufacturers. This contributed to a sustainable global supply of affordable Hib conjugate vaccines, as illustrated by the market launch of the first Hib vaccine based on this technology in 2007 and concomitant price reduction of Hib vaccines. This paper describes the development approach followed for this Hib conjugate vaccine as well as the mathematical modeling tool applied recently in order to indicate options for further improvements of the initial Hib process. The strategy followed during the process development of this Hib conjugate vaccine was a targeted and integrated approach based on prior knowledge and experience with similar products using multi-disciplinary expertise. Mathematical modeling was used to develop a predictive model for the initial Hib process (the 'baseline' model) as well as an 'optimized' model, by proposing a number of process changes which could lead to further reduction in price. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:568-580, 2016. © 2016 American Institute of Chemical Engineers.

The roles of a process development group in biopharmaceutical process startup.

PubMed

Goochee, Charles F

2002-01-01

The transfer of processes for biotherapeutic products into finalmanufacturing facilities was frequently problematic during the 1980's and early 1990's, resulting in costly delays to licensure(Pisano 1997). While plant startups for this class of products can become chaotic affairs, this is not an inherent or intrinsic feature. Major classes of process startup problems have been identified andmechanisms have been developed to reduce their likelihood of occurrence. These classes of process startup problems and resolution mechanisms are the major topic of this article. With proper planning and sufficient staffing, the probably of a smooth process startup for a biopharmaceutical product can be very high - i.e., successful process performance will often beachieved within the first two full-scale process lots in the plant. The primary focus of this article is the role of the Process Development Group in helping to assure this high probability of success.

Massively parallel information processing systems for space applications

NASA Technical Reports Server (NTRS)

Schaefer, D. H.

1979-01-01

NASA is developing massively parallel systems for ultra high speed processing of digital image data collected by satellite borne instrumentation. Such systems contain thousands of processing elements. Work is underway on the design and fabrication of the 'Massively Parallel Processor', a ground computer containing 16,384 processing elements arranged in a 128 x 128 array. This computer uses existing technology. Advanced work includes the development of semiconductor chips containing thousands of feedthrough paths. Massively parallel image analog to digital conversion technology is also being developed. The goal is to provide compact computers suitable for real-time onboard processing of images.

Multiscale and Multiphysics Modeling of Additive Manufacturing of Advanced Materials

NASA Technical Reports Server (NTRS)

Liou, Frank; Newkirk, Joseph; Fan, Zhiqiang; Sparks, Todd; Chen, Xueyang; Fletcher, Kenneth; Zhang, Jingwei; Zhang, Yunlu; Kumar, Kannan Suresh; Karnati, Sreekar

2015-01-01

The objective of this proposed project is to research and develop a prediction tool for advanced additive manufacturing (AAM) processes for advanced materials and develop experimental methods to provide fundamental properties and establish validation data. Aircraft structures and engines demand materials that are stronger, useable at much higher temperatures, provide less acoustic transmission, and enable more aeroelastic tailoring than those currently used. Significant improvements in properties can only be achieved by processing the materials under nonequilibrium conditions, such as AAM processes. AAM processes encompass a class of processes that use a focused heat source to create a melt pool on a substrate. Examples include Electron Beam Freeform Fabrication and Direct Metal Deposition. These types of additive processes enable fabrication of parts directly from CAD drawings. To achieve the desired material properties and geometries of the final structure, assessing the impact of process parameters and predicting optimized conditions with numerical modeling as an effective prediction tool is necessary. The targets for the processing are multiple and at different spatial scales, and the physical phenomena associated occur in multiphysics and multiscale. In this project, the research work has been developed to model AAM processes in a multiscale and multiphysics approach. A macroscale model was developed to investigate the residual stresses and distortion in AAM processes. A sequentially coupled, thermomechanical, finite element model was developed and validated experimentally. The results showed the temperature distribution, residual stress, and deformation within the formed deposits and substrates. A mesoscale model was developed to include heat transfer, phase change with mushy zone, incompressible free surface flow, solute redistribution, and surface tension. Because of excessive computing time needed, a parallel computing approach was also tested. In addition, after investigating various methods, a Smoothed Particle Hydrodynamics Model (SPH Model) was developed to model wire feeding process. Its computational efficiency and simple architecture makes it more robust and flexible than other models. More research on material properties may be needed to realistically model the AAM processes. A microscale model was developed to investigate heterogeneous nucleation, dendritic grain growth, epitaxial growth of columnar grains, columnar-to-equiaxed transition, grain transport in melt, and other properties. The orientations of the columnar grains were almost perpendicular to the laser motion's direction. Compared to the similar studies in the literature, the multiple grain morphology modeling result is in the same order of magnitude as optical morphologies in the experiment. Experimental work was conducted to validate different models. An infrared camera was incorporated as a process monitoring and validating tool to identify the solidus and mushy zones during deposition. The images were successfully processed to identify these regions. This research project has investigated multiscale and multiphysics of the complex AAM processes thus leading to advanced understanding of these processes. The project has also developed several modeling tools and experimental validation tools that will be very critical in the future of AAM process qualification and certification.

The Effects of Radiation Chemistry on Solvent Extraction: 1. Conditions in Acidic Solution and a Review of TBP Radiolysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bruce J. Mincher; Guiseppe Modolo; Strephen P. Mezyk

2009-01-01

Solvent extraction is the most commonly used process scale separation technique for nuclear applications and it benefits from more than 60 years of research and development and proven experience at the industrial scale. Advanced solvent extraction processes for the separation of actinides and fission products from dissolved nuclear fuel are now being investigated worldwide by numerous groups (US, Europe, Russia, Japan etc.) in order to decrease the radiotoxic inventories of nuclear waste. While none of the advanced processes have yet been implemented at the industrial scale their development studies have sometimes reached demonstration tests at the laboratory scale. Most ofmore » the partitioning strategies rely on the following four separations: 1. Partitioning of uranium and/or plutonium from spent fuel dissolution liquors. 2. Separation of the heat generating fission products such as strontium and cesium. 3. Coextraction of the trivalent actinides and lanthanides. 4. Separation of the trivalent actinides from the trivalent lanthanides. Tributylphosphate (TBP) in the first separation is the basis of the PUREX, UREX and COEX processes, developed in Europe and the US, whereas monoamides as alternatives for TBP are being developed in Japan and India. For the second separation, many processes were developed worldwide, including the use of crown-ether extractants, like the FPEX process developed in the USA, and the CCD-PEG process jointly developed in the USA and Russia for the partitioning of cesium and strontium. In the third separation, phosphine oxides (CMPOs), malonamides, and diglycolamides are used in the TRUEX, DIAMEX and the ARTIST processes, respectively developed in US, Europe and Japan. Trialkylphosphine oxide(TRPO) developed in China, or UNEX (a mixture of several extractants) jointly developed in Russia and the USA allow all actinides to be co-extracted from acidic radioactive liquid waste. For the final separation, soft donor atom-containing ligands such as the bistriazinylbipyridines (BTBPs) or dithiophosphinic acids have been developed in Europe and China to selectively extract the trivalent actinides. However, in the TALSPEAK process developed in the USA, the separation is based on the relatively high affinity of aminopolycarboxylic acid complexants such as DTPA for trivalent actinides over lanthanides. In the DIDPA, SETFICS and the GANEX processes, developed in Japan and France, the group separation is accomplished in a reverse TALSPEAK process. A typical scenario is shown in Figure 1 for the UREX1a (Uranium Extraction version 1a) process. The initial step is the TBP extraction for the separation of recyclable uranium. The second step partitions the short-lived, highly radioactive cesium and strontium to minimize heat loading in the high-level waste repository. The third step is a group separation of the trivalent actinides and lanthanides with the last step being partitioning of the trivalent lanthanides from the actinides.« less

Materials, Processes and Manufacturing in Ares 1 Upper Stage: Integration with Systems Design and Development

NASA Technical Reports Server (NTRS)

Bhat, Biliyar N.

2008-01-01

Ares I Crew Launch Vehicle Upper Stage is designed and developed based on sound systems engineering principles. Systems Engineering starts with Concept of Operations and Mission requirements, which in turn determine the launch system architecture and its performance requirements. The Ares I-Upper Stage is designed and developed to meet these requirements. Designers depend on the support from materials, processes and manufacturing during the design, development and verification of subsystems and components. The requirements relative to reliability, safety, operability and availability are also dependent on materials availability, characterization, process maturation and vendor support. This paper discusses the roles and responsibilities of materials and manufacturing engineering during the various phases of Ares IUS development, including design and analysis, hardware development, test and verification. Emphasis is placed how materials, processes and manufacturing support is integrated over the Upper Stage Project, both horizontally and vertically. In addition, the paper describes the approach used to ensure compliance with materials, processes, and manufacturing requirements during the project cycle, with focus on hardware systems design and development.

How does Learning Impact Development in Infancy? The Case of Perceptual Organization

PubMed Central

Bhatt, Ramesh S.; Quinn, Paul C.

2011-01-01

Pattern perception and organization are critical functions of the visual cognition system. Many organizational processes are available early in life, such that infants as young 3 months of age are able to readily utilize a variety of cues to organize visual patterns. However, other processes are not readily evident in young infants, and their development involves perceptual learning. We describe a theoretical framework that addresses perceptual learning in infancy and the manner in which it affects visual organization and development. It identifies five kinds of experiences that induce learning, and suggests that they work via attentional and unitization mechanisms to modify visual organization. In addition, the framework proposes that this kind of learning is abstract, domain general, functional at different ages in a qualitatively similar manner, and has a long-term impact on development through a memory reactivation process. Although most models of development assume that experience is fundamental to development, very little is actually known about the process by which experience affects development. The proposed framework is an attempt to account for this process in the domain of perception. PMID:21572570

Development of a data acquisition system using a RISC/UNIX TM workstation

NASA Astrophysics Data System (ADS)

Takeuchi, Y.; Tanimori, T.; Yasu, Y.

1993-05-01

We have developed a compact data acquisition system on RISC/UNIX workstations. A SUN TM SPARCstation TM IPC was used, in which an extension bus "SBus TM" was linked to a VMEbus. The transfer rate achieved was better than 7 Mbyte/s between the VMEbus and the SUN. A device driver for CAMAC was developed in order to realize an interruptive feature in UNIX. In addition, list processing has been incorporated in order to keep the high priority of the data handling process in UNIX. The successful developments of both device driver and list processing have made it possible to realize the good real-time feature on the RISC/UNIX system. Based on this architecture, a portable and versatile data taking system has been developed, which consists of a graphical user interface, I/O handler, user analysis process, process manager and a CAMAC device driver.

Advanced technology development for image gathering, coding, and processing

NASA Technical Reports Server (NTRS)

Huck, Friedrich O.

1990-01-01

Three overlapping areas of research activities are presented: (1) Information theory and optimal filtering are extended to visual information acquisition and processing. The goal is to provide a comprehensive methodology for quantitatively assessing the end-to-end performance of image gathering, coding, and processing. (2) Focal-plane processing techniques and technology are developed to combine effectively image gathering with coding. The emphasis is on low-level vision processing akin to the retinal processing in human vision. (3) A breadboard adaptive image-coding system is being assembled. This system will be used to develop and evaluate a number of advanced image-coding technologies and techniques as well as research the concept of adaptive image coding.

Conjecturing and Generalization Process on The Structural Development

NASA Astrophysics Data System (ADS)

Ni'mah, Khomsatun; Purwanto; Bambang Irawan, Edy; Hidayanto, Erry

2017-06-01

This study aims to describe how conjecturing process and generalization process of structural development to thirty children in middle school at grade 8 in solving problems of patterns. Processing of the data in this study uses qualitative data analysis techniques. The analyzed data is the data obtained through direct observation technique, documentation, and interviews. This study based on research studies Mulligan et al (2012) which resulted in a five - structural development stage, namely prestructural, emergent, partial, structural, and advance. From the analysis of the data in this study found there are two phenomena that is conjecturing and generalization process are related. During the conjecturing process, the childrens appropriately in making hypothesis of patterns problem through two phases, which are numerically and symbolically. Whereas during the generalization of process, the childrens able to related rule of pattern on conjecturing process to another context.

Development of a beam builder for automatic fabrication of large composite space structures

NASA Technical Reports Server (NTRS)

Bodle, J. G.

1979-01-01

The composite material beam builder which will produce triangular beams from pre-consolidated graphite/glass/thermoplastic composite material through automated mechanical processes is presented, side member storage, feed and positioning, ultrasonic welding, and beam cutoff are formed. Each process lends itself to modular subsystem development. Initial development is concentrated on the key processes for roll forming and ultrasonic welding composite thermoplastic materials. The construction and test of an experimental roll forming machine and ultrasonic welding process control techniques are described.

Low cost solar array project: Experimental process system development unit for producing semiconductor-grade silicon using silane-to-silicon process

NASA Technical Reports Server (NTRS)

1980-01-01

The design, fabrication, and installation of an experimental process system development unit (EPSDU) were analyzed. Supporting research and development were performed to provide an information data base usable for the EPSDU and for technological design and economical analysis for potential scale-up of the process. Iterative economic analyses were conducted for the estimated product cost for the production of semiconductor grade silicon in a facility capable of producing 1000-MT/Yr.

Women Education and Economic Development in Kenya: Implications for Curriculum Development and Implementation Processes

ERIC Educational Resources Information Center

Syomwene, Anne; Kindiki, Jonah Nyaga

2015-01-01

This paper is a discussion of the relationship between women education and sustainable economic development in Kenya and its implications for curriculum development and implementation processes. The argument advanced in this paper is that the solution to the development problems in Kenya and other developing nations lies on women education.…

Big Data Analysis of Manufacturing Processes

NASA Astrophysics Data System (ADS)

Windmann, Stefan; Maier, Alexander; Niggemann, Oliver; Frey, Christian; Bernardi, Ansgar; Gu, Ying; Pfrommer, Holger; Steckel, Thilo; Krüger, Michael; Kraus, Robert

2015-11-01

The high complexity of manufacturing processes and the continuously growing amount of data lead to excessive demands on the users with respect to process monitoring, data analysis and fault detection. For these reasons, problems and faults are often detected too late, maintenance intervals are chosen too short and optimization potential for higher output and increased energy efficiency is not sufficiently used. A possibility to cope with these challenges is the development of self-learning assistance systems, which identify relevant relationships by observation of complex manufacturing processes so that failures, anomalies and need for optimization are automatically detected. The assistance system developed in the present work accomplishes data acquisition, process monitoring and anomaly detection in industrial and agricultural processes. The assistance system is evaluated in three application cases: Large distillation columns, agricultural harvesting processes and large-scale sorting plants. In this paper, the developed infrastructures for data acquisition in these application cases are described as well as the developed algorithms and initial evaluation results.

Kennedy Space Center Launch and Landing Support

NASA Technical Reports Server (NTRS)

Wahlberg, Jennifer

2010-01-01

The presentations describes Kennedy Space Center (KSC) payload processing, facilities and capabilities, and research development and life science experience. Topics include launch site processing, payload processing, key launch site processing roles, leveraging KSC experience, Space Station Processing Facility and capabilities, Baseline Data Collection Facility, Space Life Sciences Laboratory and capabilities, research payload development, International Space Station research flight hardware, KSC flight payload history, and KSC life science expertise.

Emerging freeze-drying process development and scale-up issues.

PubMed

Patel, Sajal Manubhai; Pikal, Michael J

2011-03-01

Although several guidelines do exist for freeze-drying process development and scale-up, there are still a number of issues that require additional attention. The objective of this review article is to discuss some emerging process development and scale-up issue with emphasis on effect of load condition and freeze-drying in novel container systems such as syringes, Lyoguard trays, ampoules, and 96-well plates. Understanding the heat and mass transfer under different load conditions and for freeze-drying in these novel container systems will help in developing a robust freeze-drying process which is also easier to scale-up. Further research and development needs in these emerging areas have also been addressed. © 2011 American Association of Pharmaceutical Scientists

Optimization of Primary Drying in Lyophilization during Early Phase Drug Development using a Definitive Screening Design with Formulation and Process Factors.

PubMed

Goldman, Johnathan M; More, Haresh T; Yee, Olga; Borgeson, Elizabeth; Remy, Brenda; Rowe, Jasmine; Sadineni, Vikram

2018-06-08

Development of optimal drug product lyophilization cycles is typically accomplished via multiple engineering runs to determine appropriate process parameters. These runs require significant time and product investments, which are especially costly during early phase development when the drug product formulation and lyophilization process are often defined simultaneously. Even small changes in the formulation may require a new set of engineering runs to define lyophilization process parameters. In order to overcome these development difficulties, an eight factor definitive screening design (DSD), including both formulation and process parameters, was executed on a fully human monoclonal antibody (mAb) drug product. The DSD enables evaluation of several interdependent factors to define critical parameters that affect primary drying time and product temperature. From these parameters, a lyophilization development model is defined where near optimal process parameters can be derived for many different drug product formulations. This concept is demonstrated on a mAb drug product where statistically predicted cycle responses agree well with those measured experimentally. This design of experiments (DoE) approach for early phase lyophilization cycle development offers a workflow that significantly decreases the development time of clinically and potentially commercially viable lyophilization cycles for a platform formulation that still has variable range of compositions. Copyright © 2018. Published by Elsevier Inc.

An exploratory survey of methods used to develop measures of performance

NASA Astrophysics Data System (ADS)

Hamner, Kenneth L.; Lafleur, Charles A.

1993-09-01

Nonmanufacturing organizations are being challenged to provide high-quality products and services to their customers, with an emphasis on continuous process improvement. Measures of performance, referred to as metrics, can be used to foster process improvement. The application of performance measurement to nonmanufacturing processes can be very difficult. This research explored methods used to develop metrics in nonmanufacturing organizations. Several methods were formally defined in the literature, and the researchers used a two-step screening process to determine the OMB Generic Method was most likely to produce high-quality metrics. The OMB Generic Method was then used to develop metrics. A few other metric development methods were found in use at nonmanufacturing organizations. The researchers interviewed participants in metric development efforts to determine their satisfaction and to have them identify the strengths and weaknesses of, and recommended improvements to, the metric development methods used. Analysis of participants' responses allowed the researchers to identify the key components of a sound metrics development method. Those components were incorporated into a proposed metric development method that was based on the OMB Generic Method, and should be more likely to produce high-quality metrics that will result in continuous process improvement.

Professional Development Priorities Process (Needs Assessment). Leader's Handbook.

ERIC Educational Resources Information Center

Southeast Idaho Teacher Center Consortium, Twin Falls.

Step-by-step instructions are provided for implementing the Professional Development Priorities Process (PDPP), an educational needs assessment process, by a school faculty member with groups of eight peers or more. The essence of PDPP, which was designed at the Southeast Idaho Teacher Center Consortium, is a dynamic group process in which needs…

Challenges of Engaging Local Stakeholders for Statewide Program Development Process

ERIC Educational Resources Information Center

Martin, Michael J.; Leuci, Mary; Stewart, Mark

2014-01-01

The University of Missouri Extension needed to develop an annual program review process that collaboratively engaged county-level stakeholders. The results from the first 2 years highlight the results, challenges, and implications of the design process. The annual review process needs to be adaptive, responsive, and reflective from year to year…

The Development of Verbal and Visual Working Memory Processes: A Latent Variable Approach

ERIC Educational Resources Information Center

Koppenol-Gonzalez, Gabriela V.; Bouwmeester, Samantha; Vermunt, Jeroen K.

2012-01-01

Working memory (WM) processing in children has been studied with different approaches, focusing on either the organizational structure of WM processing during development (factor analytic) or the influence of different task conditions on WM processing (experimental). The current study combined both approaches, aiming to distinguish verbal and…

Basic Auditory Processing Skills and Phonological Awareness in Low-IQ Readers and Typically Developing Controls

ERIC Educational Resources Information Center

Kuppen, Sarah; Huss, Martina; Fosker, Tim; Fegan, Natasha; Goswami, Usha

2011-01-01

We explore the relationships between basic auditory processing, phonological awareness, vocabulary, and word reading in a sample of 95 children, 55 typically developing children, and 40 children with low IQ. All children received nonspeech auditory processing tasks, phonological processing and literacy measures, and a receptive vocabulary task.…

Climate Action Planning Process | Climate Neutral Research Campuses | NREL

Science.gov Websites

Action Planning Process Climate Action Planning Process For research campuses, NREL has developed a five-step process to develop and implement climate action plans: Determine baseline energy consumption Analyze technology options Prepare a plan and set priorities Implement the climate action plan Measure and

Looking for Synergies: Education for Sustainable Development and the Bologna Process

ERIC Educational Resources Information Center

Fadeeva, Zinaida; Galkute, Laima

2012-01-01

In defining quality of higher education, competences achieved by graduates are interpreted as essential criteria. There are two political processes in education dealing, among other issues, with competence development: the Bologna Process in European Higher Education Area and a global process--the United Nations (UN) Decade (2005-2014) of…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zitney, S.E.; McCorkle, D.; Yang, C.

Process modeling and simulation tools are widely used for the design and operation of advanced power generation systems. These tools enable engineers to solve the critical process systems engineering problems that arise throughout the lifecycle of a power plant, such as designing a new process, troubleshooting a process unit or optimizing operations of the full process. To analyze the impact of complex thermal and fluid flow phenomena on overall power plant performance, the Department of Energy’s (DOE) National Energy Technology Laboratory (NETL) has developed the Advanced Process Engineering Co-Simulator (APECS). The APECS system is an integrated software suite that combinesmore » process simulation (e.g., Aspen Plus) and high-fidelity equipment simulations such as those based on computational fluid dynamics (CFD), together with advanced analysis capabilities including case studies, sensitivity analysis, stochastic simulation for risk/uncertainty analysis, and multi-objective optimization. In this paper we discuss the initial phases of the integration of the APECS system with the immersive and interactive virtual engineering software, VE-Suite, developed at Iowa State University and Ames Laboratory. VE-Suite uses the ActiveX (OLE Automation) controls in the Aspen Plus process simulator wrapped by the CASI library developed by Reaction Engineering International to run process/CFD co-simulations and query for results. This integration represents a necessary step in the development of virtual power plant co-simulations that will ultimately reduce the time, cost, and technical risk of developing advanced power generation systems.« less

ASRM process development in aqueous cleaning

NASA Technical Reports Server (NTRS)

Swisher, Bill

1992-01-01

Viewgraphs are included on process development in aqueous cleaning which is taking place at the Aerojet Advanced Solid Rocket Motor (ASRM) Division under a NASA Marshall Space and Flight Center contract for design, development, test, and evaluation of the ASRM including new production facilities. The ASRM will utilize aqueous cleaning in several manufacturing process steps to clean case segments, nozzle metal components, and igniter closures. ASRM manufacturing process development is underway, including agent selection, agent characterization, subscale process optimization, bonding verification, and scale-up validation. Process parameters are currently being tested for optimization utilizing a Taguci Matrix, including agent concentration, cleaning solution temperature, agitation and immersion time, rinse water amount and temperature, and use/non-use of drying air. Based on results of process development testing to date, several observations are offered: aqueous cleaning appears effective for steels and SermeTel-coated metals in ASRM processing; aqueous cleaning agents may stain and/or attack bare aluminum metals to various extents; aqueous cleaning appears unsuitable for thermal sprayed aluminum-coated steel; aqueous cleaning appears to adequately remove a wide range of contaminants from flat metal surfaces, but supplementary assistance may be needed to remove clumps of tenacious contaminants embedded in holes, etc.; and hot rinse water appears to be beneficial to aid in drying of bare steel and retarding oxidation rate.

Novel shortcut estimation method for regeneration energy of amine solvents in an absorption-based carbon capture process.

PubMed

Kim, Huiyong; Hwang, Sung June; Lee, Kwang Soon

2015-02-03

Among various CO2 capture processes, the aqueous amine-based absorption process is considered the most promising for near-term deployment. However, the performance evaluation of newly developed solvents still requires complex and time-consuming procedures, such as pilot plant tests or the development of a rigorous simulator. Absence of accurate and simple calculation methods for the energy performance at an early stage of process development has lengthened and increased expense of the development of economically feasible CO2 capture processes. In this paper, a novel but simple method to reliably calculate the regeneration energy in a standard amine-based carbon capture process is proposed. Careful examination of stripper behaviors and exploitation of energy balance equations around the stripper allowed for calculation of the regeneration energy using only vapor-liquid equilibrium and caloric data. Reliability of the proposed method was confirmed by comparing to rigorous simulations for two well-known solvents, monoethanolamine (MEA) and piperazine (PZ). The proposed method can predict the regeneration energy at various operating conditions with greater simplicity, greater speed, and higher accuracy than those proposed in previous studies. This enables faster and more precise screening of various solvents and faster optimization of process variables and can eventually accelerate the development of economically deployable CO2 capture processes.

Materials Genome Initiative

NASA Technical Reports Server (NTRS)

Vickers, John

2015-01-01

The Materials Genome Initiative (MGI) project element is a cross-Center effort that is focused on the integration of computational tools to simulate manufacturing processes and materials behavior. These computational simulations will be utilized to gain understanding of processes and materials behavior to accelerate process development and certification to more efficiently integrate new materials in existing NASA projects and to lead to the design of new materials for improved performance. This NASA effort looks to collaborate with efforts at other government agencies and universities working under the national MGI. MGI plans to develop integrated computational/experimental/ processing methodologies for accelerating discovery and insertion of materials to satisfy NASA's unique mission demands. The challenges include validated design tools that incorporate materials properties, processes, and design requirements; and materials process control to rapidly mature emerging manufacturing methods and develop certified manufacturing processes

A Qualitative Study of Latino Lesbian and Gay Youths' Experiences with Discrimination and the Career Development Process

ERIC Educational Resources Information Center

Adams, Eve M.; Cahill, Betsy J.; Ackerlind, Stacy J.

2005-01-01

Eight Latino lesbian and gay (LG) youth were interviewed for this descriptive qualitative study. The purpose of this study was to examine the Latino LG youth career development process and to increase our understanding of how multiple identities intersect with each other and the career development process. Six themes emerged: knowing you are…

European Science Notes Information Bulletin Reports on Current European and Middle Eastern Science

DTIC Science & Technology

1992-01-01

Overcash MATERIALS Research and Development in the Abbey-Polymer Processing and Properties ................... 574 J. Magill Corrosion and Protection Centre...gressi• ely pursuing the development of powerful "* Software Engineering and microprocessors and communication chips. The Information Processing ...differential equations, processing , Europe has a number of fascinating weather forecasting) that are to be developed by a projects in distributed

Rapid Development: A Content Analysis Comparison of Literature and Purposive Sampling of AFRL Rapid Reaction Projects

DTIC Science & Technology

2011-12-01

systems engineering technical and technical management processes. Technical Planning, Stakeholders Requirements Development, and Architecture Design were...Stakeholder Requirements Definition, Architecture Design and Technical Planning. A purposive sampling of AFRL rapid development program managers and engineers...emphasize one process over another however Architecture Design , Implementation scored higher among Technical Processes. Decision Analysis, Technical

New Product Development (NPD) Process - An Example of Industrial Sector

NASA Astrophysics Data System (ADS)

Kazimierska, Marianna; Grębosz-Krawczyk, Magdalena

2017-12-01

This aim of this article is to present the process of new product introduction on example of industrial sector in context of new product development (NPD) concept. In the article, the concept of new product development is discussed and the different stages of the process of new electric motor development are analysed taking into account its objectives, implemented procedures, functions and responsibilities division. In the article, information from secondary sources and the results of empirical research - conducted in an international manufacturing company - are used. The research results show the significance of project leader and regular cooperation with final client in the NPD process.

PVD thermal barrier coating applications and process development for aircraft engines

NASA Astrophysics Data System (ADS)

Rigney, D. V.; Viguie, R.; Wortman, D. J.; Skelly, D. W.

1997-06-01

Thermal barrier coatings (TBCs) have been developed for application to aircraft engine components to improve service life in an increasingly hostile thermal environment. The choice of TBC type is related to the component, intended use, and economics. Selection of electron beam physical vapor deposition proc-essing for turbine blade is due in part to part size, surface finish requirements, thickness control needs, and hole closure issues. Process development of PVD TBCs has been carried out at several different sites, including GE Aircraft Engines (GEAE). The influence of processing variables on microstructure is dis-cussed, along with the GEAE development coater and initial experiences of pilot line operation.

A model for process representation and synthesis. Ph.D. Thesis

NASA Technical Reports Server (NTRS)

Thomas, R. H.

1971-01-01

The problem of representing groups of loosely connected processes is investigated, and a model for process representation useful for synthesizing complex patterns of process behavior is developed. There are three parts, the first part isolates the concepts which form the basis for the process representation model by focusing on questions such as: What is a process; What is an event; Should one process be able to restrict the capabilities of another? The second part develops a model for process representation which captures the concepts and intuitions developed in the first part. The model presented is able to describe both the internal structure of individual processes and the interface structure between interacting processes. Much of the model's descriptive power derives from its use of the notion of process state as a vehicle for relating the internal and external aspects of process behavior. The third part demonstrates by example that the model for process representation is a useful one for synthesizing process behavior patterns. In it the model is used to define a variety of interesting process behavior patterns. The dissertation closes by suggesting how the model could be used as a semantic base for a very potent language extension facility.

A Latent Variables Examination of Processing Speed, Response Inhibition, and Working Memory during Typical Development

PubMed Central

McAuley, Tara; White, Desirée

2010-01-01

The present study addressed three related aims: (1) to replicate and extend previous work regarding the non-unitary nature of processing speed, response inhibition, and working memory during development, (2) to quantify the rate at which processing speed, response inhibition, and working memory develop and the extent to which the development of these latter abilities reflect general changes in processing speed, and (3) to evaluate whether commonly used tasks of processing speed, response inhibition, and working memory are valid and reliable when used with a developmentally diverse group. To address these aims, a latent variables approach was used to analyze data from 147 participants 6 to 24 years of age. Results showed that processing speed, response inhibition, and working memory were separable abilities and that the extent of this separability was stable cross the age range of participants. All three constructs improved as a function of age; however, only the effect of age on working memory remained significant after processing speed was controlled. The psychometric properties of tasks used to assess the constructs were age invariant, thus validating their use in studies of executive development. PMID:20888572

Diversity of thermophilic populations during thermophilic aerobic digestion of potato peel slurry.

PubMed

Ugwuanyi, J O; Harvey, L M; McNeil, B

2008-01-01

To study the diversity of thermophiles during thermophilic aerobic digestion (TAD) of agro-food waste slurries under conditions similar to full-scale processes. Population diversity and development in TAD were studied by standard microbiological techniques and the processes monitored by standard fermentation procedures. Facultative thermophiles were identified as Bacillus coagulans and B. licheniformis, while obligate thermophiles were identified as B. stearothermophilus. They developed rapidly to peaks of 10(7) to 10(8) in

Goal setting with mothers in child development services.

PubMed

Forsingdal, S; St John, W; Miller, V; Harvey, A; Wearne, P

2014-07-01

The aim of this grounded theory study was to explore mothers' perspectives of the processes of collaborative goal setting in multidisciplinary child development services involving follow-up home therapy. Semi-structured interviews were conducted in South East Queensland, Australia with 14 mothers of children aged 3-6 years who were accessing multidisciplinary child development services. Interviews were focussed around the process of goal setting. A grounded theory of Maternal Roles in Goal Setting (The M-RIGS Model) was developed from analysis of data. Mothers assumed Dependent, Active Participator and Collaborator roles when engaging with the therapist in goal-setting processes. These roles were characterized by the mother's level of dependence on the therapist and insight into their child's needs and therapy processes. Goal Factors, Parent Factors and Therapist Factors influenced and added complexity to the goal-setting process. The M-RIGS Model highlights that mothers take on a range of roles in the goal-setting process. Although family-centred practice encourages negotiation and collaborative goal setting, parents may not always be ready to take on highly collaborative roles. Better understanding of parent roles, goal-setting processes and influencing factors will inform better engagement with families accessing multidisciplinary child development services. © 2013 John Wiley & Sons Ltd.

From Discovery to Production: Biotechnology of Marine Fungi for the Production of New Antibiotics.

PubMed

Silber, Johanna; Kramer, Annemarie; Labes, Antje; Tasdemir, Deniz

2016-07-21

Filamentous fungi are well known for their capability of producing antibiotic natural products. Recent studies have demonstrated the potential of antimicrobials with vast chemodiversity from marine fungi. Development of such natural products into lead compounds requires sustainable supply. Marine biotechnology can significantly contribute to the production of new antibiotics at various levels of the process chain including discovery, production, downstream processing, and lead development. However, the number of biotechnological processes described for large-scale production from marine fungi is far from the sum of the newly-discovered natural antibiotics. Methods and technologies applied in marine fungal biotechnology largely derive from analogous terrestrial processes and rarely reflect the specific demands of the marine fungi. The current developments in metabolic engineering and marine microbiology are not yet transferred into processes, but offer numerous options for improvement of production processes and establishment of new process chains. This review summarises the current state in biotechnological production of marine fungal antibiotics and points out the enormous potential of biotechnology in all stages of the discovery-to-development pipeline. At the same time, the literature survey reveals that more biotechnology transfer and method developments are needed for a sustainable and innovative production of marine fungal antibiotics.

Process development and tooling design for intrinsic hybrid composites

NASA Astrophysics Data System (ADS)

Riemer, M.; Müller, R.; Drossel, W. G.; Landgrebe, D.

2017-09-01

Hybrid parts, which combine the advantages of different material classes, are moving into the focus of lightweight applications. This development is amplified by their high potential for usage in the field of crash relevant structures. By the current state of the art, hybrid parts are mainly made in separate, subsequent forming and joining processes. By using the concept of an intrinsic hybrid, the shaping of the part and the joining of the different materials are performed in a single process step for shortening the overall processing time and thereby the manufacturing costs. The investigated hybrid part is made from continuous fibre reinforced plastic (FRP), in which a metallic reinforcement structure is integrated. The connection between these layered components is realized by a combination of adhesive bonding and a geometrical form fit. The form fit elements are intrinsically generated during the forming process. This contribution regards the development of the forming process and the design of the forming tool for the single step production of a hybrid part. To this end a forming tool, which combines the thermo-forming and the metal forming process, is developed. The main challenge by designing the tool is the temperature management of the tool elements for the variothermal forming process. The process parameters are determined in basic tests and finite element (FE) simulation studies. On the basis of these investigations a control concept for the steering of the motion axes and the tool temperature is developed. Forming tests are carried out with the developed tool and the manufactured parts are analysed by computer assisted tomography (CT) scans.

The Building Wellness project: a case history of partnership, power sharing, and compromise.

PubMed

Jones, Drew; Franklin, Charla; Butler, Brittany T; Williams, Pluscedia; Wells, Kenneth B; Rodríguez, Michael A

2006-01-01

The Institute of Medicine has recommended development of community-focused strategies to alleviate the disproportionate burden of illness on minorities, including depression. So far, limited data exist on the process of developing such partnerships within diverse racial/ethnic environments as they strive to develop community-driven, evidence-based action plans to improve the quality of outreach services. We describe such an effort around depression in south Los Angeles and explore the issues of the process in the hopes of informing future partnership development. Community meetings, presentations, feedback, discussion groups, and consensus-based action items were implemented over an 18-month period. A writing subcommittee was designated to develop a description of the group's work and process, as well as the diverse perspectives in the partnership. Data sources included meeting minutes, materials for members and community feedback presentations, scribe notes, and the reflections of the authors. Development was seen on the formal group level, in the process, and on the realization of three categories of action plans. Designed to assist social service caseworkers in the recognition of and referral for depression, the action plans included developing a website, a tool kit (modified Delphi process), and a one-page depression "fact sheet" with region-specific referrals. Through the process of developing a means to combat depression in a racially/ ethnically diverse population, the community is not only better informed about depression but has become a true partner with the academic element in adapting these programs for local service providers, resulting in improved understanding of the partnership process.

The Role of the University in the Development Process of Less Developed Countries

ERIC Educational Resources Information Center

Tinbergen, J.

1978-01-01

The role of the university in the development process must be dealt with in an environment of widespread great poverty characteristic of the larger part of the developing world. Focuses on development policy and the satisfaction of human basic needs as the highest priority for the university. (Author/RK)

24 CFR 972.133 - Public and resident consultation process for developing a conversion plan.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 24 Housing and Urban Development 4 2012-04-01 2012-04-01 false Public and resident consultation process for developing a conversion plan. 972.133 Section 972.133 Housing and Urban Development... ASSISTANCE Required Conversion of Public Housing Developments Conversion Plans § 972.133 Public and resident...

Professional Development Sites: Revitalizing Preservice Education in Middle Schools.

ERIC Educational Resources Information Center

Bell, Nancy M.

This case study reports on the experiences of teachers and student teachers during the process of developing and implementing professional development sites (PDSs) at one urban and two rural middle schools. The study examines the phases of development that teachers go through in the process of developing PDSs and how teachers' level of development…

Recovery of Uranium from Wet Phosphoric Acid by Solvent Extraction Processes

DOE PAGES

Beltrami, Denis; Cote, Gérard; Mokhtari, Hamid; ...

2014-11-17

Between 1951 and 1991, we developed about 17 processes to recover uranium from wet phosphoric acid (WPA), but the viability of these processes was subject to the variation of the uranium price market. Nowadays, uranium from WPA appears to be attractive due to the increase of the global uranium demand resulting from the emergence of developing countries. Moreover, the increasing demand provides impetus for a new look at the applicable technology with a view to improvements as well as altogether new approaches. This paper gives an overview on extraction processes developed in the past to recover uranium from wet phosphoricmore » acid (WPA) as well as the physicochemistry involved in these processes. Recent advances concerning the development of new extraction systems are also reported and discussed.« less

Commercialization of Ultra-Hard Ceramics for Cutting Tools Final Report CRADA No. TC0279.0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Landingham, R.; Neumann, T.

This was a collaborative effort between Lawrence Livermore National Security, LLC as manager and operator of Lawrence Livermore National Laboratory (LLNL) and Greenleaf Corporation (Greenleaf) to develop the technology for forming unique precursor nano-powders process that can be consolidated into ceramic products for industry. LLNL researchers have developed a solgel process for forming nano-ceramic powders. The nano powders are highly tailorable, allowing the explicit design of desired properties that lead to ultra hard materials with fine grain size. The present CRADA would allow the two parties to continue the development of the sol-gel process and the consolidation process in ordermore » to develop an industrially sound process for the manufacture of these ultra-hard materials.« less

The development of information processing biases in childhood anxiety: a review and exploration of its origins in parenting.

PubMed

Hadwin, Julie A; Garner, Matthew; Perez-Olivas, Gisela

2006-11-01

The aim of this paper is to explore parenting as one potential route through which information processing biases for threat develop in children. It reviews information processing biases in childhood anxiety in the context of theoretical models and empirical research in the adult anxiety literature. Specifically, it considers how adult models have been used and adapted to develop a theoretical framework with which to investigate information processing biases in children. The paper then considers research which specifically aims to understand the relationship between parenting and the development of information processing biases in children. It concludes that a clearer theoretical framework is required to understand the significance of information biases in childhood anxiety, as well as their origins in parenting.

Designing Training Materials for Developing Countries.

ERIC Educational Resources Information Center

Rosenweig, Fred

1984-01-01

Describes four training guides developed by the Water and Sanitation for Health Project for use in rural water supply and sanitation projects in developing countries, explains the development process, offers insights gained from the process, and presents five considerations for designing training in third world countries. (MBR)

24 CFR 581.9 - Application process.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 24 Housing and Urban Development 3 2013-04-01 2013-04-01 false Application process. 581.9 Section 581.9 Housing and Urban Development Regulations Relating to Housing and Urban Development (Continued) OFFICE OF ASSISTANT SECRETARY FOR COMMUNITY PLANNING AND DEVELOPMENT, DEPARTMENT OF HOUSING AND URBAN...

24 CFR 581.9 - Application process.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 24 Housing and Urban Development 3 2010-04-01 2010-04-01 false Application process. 581.9 Section 581.9 Housing and Urban Development Regulations Relating to Housing and Urban Development (Continued) OFFICE OF ASSISTANT SECRETARY FOR COMMUNITY PLANNING AND DEVELOPMENT, DEPARTMENT OF HOUSING AND URBAN...

24 CFR 581.9 - Application process.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 24 Housing and Urban Development 3 2012-04-01 2012-04-01 false Application process. 581.9 Section 581.9 Housing and Urban Development Regulations Relating to Housing and Urban Development (Continued) OFFICE OF ASSISTANT SECRETARY FOR COMMUNITY PLANNING AND DEVELOPMENT, DEPARTMENT OF HOUSING AND URBAN...

24 CFR 581.9 - Application process.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 24 Housing and Urban Development 3 2014-04-01 2013-04-01 true Application process. 581.9 Section 581.9 Housing and Urban Development Regulations Relating to Housing and Urban Development (Continued) OFFICE OF ASSISTANT SECRETARY FOR COMMUNITY PLANNING AND DEVELOPMENT, DEPARTMENT OF HOUSING AND URBAN...

24 CFR 581.9 - Application process.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 24 Housing and Urban Development 3 2011-04-01 2010-04-01 true Application process. 581.9 Section 581.9 Housing and Urban Development Regulations Relating to Housing and Urban Development (Continued) OFFICE OF ASSISTANT SECRETARY FOR COMMUNITY PLANNING AND DEVELOPMENT, DEPARTMENT OF HOUSING AND URBAN...

How inverse solver technologies can support die face development and process planning in the automotive industry

NASA Astrophysics Data System (ADS)

Huhn, Stefan; Peeling, Derek; Burkart, Maximilian

2017-10-01

With the availability of die face design tools and incremental solver technologies to provide detailed forming feasibility results in a timely fashion, the use of inverse solver technologies and resulting process improvements during the product development process of stamped parts often is underestimated. This paper presents some applications of inverse technologies that are currently used in the automotive industry to streamline the product development process and greatly increase the quality of a developed process and the resulting product. The first focus is on the so-called target strain technology. Application examples will show how inverse forming analysis can be applied to support the process engineer during the development of a die face geometry for Class `A' panels. The drawing process is greatly affected by the die face design and the process designer has to ensure that the resulting drawn panel will meet specific requirements regarding surface quality and a minimum strain distribution to ensure dent resistance. The target strain technology provides almost immediate feedback to the process engineer during the die face design process if a specific change of the die face design will help to achieve these specific requirements or will be counterproductive. The paper will further show how an optimization of the material flow can be achieved through the use of a newly developed technology called Sculptured Die Face (SDF). The die face generation in SDF is more suited to be used in optimization loops than any other conventional die face design technology based on cross section design. A second focus in this paper is on the use of inverse solver technologies for secondary forming operations. The paper will show how the application of inverse technology can be used to accurately and quickly develop trim lines on simple as well as on complex support geometries.

Application of agent-based system for bioprocess description and process improvement.

PubMed

Gao, Ying; Kipling, Katie; Glassey, Jarka; Willis, Mark; Montague, Gary; Zhou, Yuhong; Titchener-Hooker, Nigel J

2010-01-01

Modeling plays an important role in bioprocess development for design and scale-up. Predictive models can also be used in biopharmaceutical manufacturing to assist decision-making either to maintain process consistency or to identify optimal operating conditions. To predict the whole bioprocess performance, the strong interactions present in a processing sequence must be adequately modeled. Traditionally, bioprocess modeling considers process units separately, which makes it difficult to capture the interactions between units. In this work, a systematic framework is developed to analyze the bioprocesses based on a whole process understanding and considering the interactions between process operations. An agent-based approach is adopted to provide a flexible infrastructure for the necessary integration of process models. This enables the prediction of overall process behavior, which can then be applied during process development or once manufacturing has commenced, in both cases leading to the capacity for fast evaluation of process improvement options. The multi-agent system comprises a process knowledge base, process models, and a group of functional agents. In this system, agent components co-operate with each other in performing their tasks. These include the description of the whole process behavior, evaluating process operating conditions, monitoring of the operating processes, predicting critical process performance, and providing guidance to decision-making when coping with process deviations. During process development, the system can be used to evaluate the design space for process operation. During manufacture, the system can be applied to identify abnormal process operation events and then to provide suggestions as to how best to cope with the deviations. In all cases, the function of the system is to ensure an efficient manufacturing process. The implementation of the agent-based approach is illustrated via selected application scenarios, which demonstrate how such a framework may enable the better integration of process operations by providing a plant-wide process description to facilitate process improvement. Copyright 2009 American Institute of Chemical Engineers

The Impact of City-level Permitting Processes on Residential Photovoltaic Installation Prices and Development Times: An Empirical Analysis of Solar Systems in California Cities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wiser, Ryan; Dong, Changgui

Business process or “soft” costs account for well over 50% of the installed price of residential photovoltaic (PV) systems in the United States, so understanding these costs is crucial for identifying PV cost-reduction opportunities. Among these costs are those imposed by city-level permitting processes, which may add both expense and time to the PV development process. Building on previous research, this study evaluates the effect of city-level permitting processes on the installed price of residential PV systems and on the time required to develop and install those systems. The study uses a unique dataset from the U.S. Department of Energy’smore » Rooftop Solar Challenge Program, which includes city-level permitting process “scores,” plus data from the California Solar Initiative and the U.S. Census. Econometric methods are used to quantify the price and development-time effects of city-level permitting processes on more than 3,000 PV installations across 44 California cities in 2011. Results indicate that city-level permitting processes have a substantial and statistically significant effect on average installation prices and project development times. The results suggest that cities with the most favorable (i.e., highest-scoring) permitting practices can reduce average residential PV prices by $0.27–$0.77/W (4%–12% of median PV prices in California) compared with cities with the most onerous (i.e., lowest-scoring) permitting practices, depending on the regression model used. Though the empirical models for development times are less robust, results suggest that the most streamlined permitting practices may shorten development times by around 24 days on average (25% of the median development time). These findings illustrate the potential price and development-time benefits of streamlining local permitting procedures for PV systems.« less

[Development of Nanotechnology for X-Ray Astronomy Instrumentation

NASA Technical Reports Server (NTRS)

Schattenburg, Mark L.

2004-01-01

This Research Grant provides support for development of nanotechnology for x-ray astronomy instrumentation. MIT has made significant progress in several development areas. In the last year we have made considerable progress in demonstrating the high-fidelity patterning and replication of x-ray reflection gratings. We developed a process for fabricating blazed gratings in silicon with extremely smooth and sharp sawtooth profiles, and developed a nanoimprint process for replication. We also developed sophisticated new fixturing for holding thin optics during metrology without causing distortion. We developed a new image processing algorithm for our Shack-Hartmann tool that uses Zernike polynomials. This has resulted in much more accurate and repeatable measurements on thin optics.

The Knowledge-Based Software Assistant: Beyond CASE

NASA Technical Reports Server (NTRS)

Carozzoni, Joseph A.

1993-01-01

This paper will outline the similarities and differences between two paradigms of software development. Both support the whole software life cycle and provide automation for most of the software development process, but have different approaches. The CASE approach is based on a set of tools linked by a central data repository. This tool-based approach is data driven and views software development as a series of sequential steps, each resulting in a product. The Knowledge-Based Software Assistant (KBSA) approach, a radical departure from existing software development practices, is knowledge driven and centers around a formalized software development process. KBSA views software development as an incremental, iterative, and evolutionary process with development occurring at the specification level.

Domain Modeling and Application Development of an Archetype- and XML-based EHRS. Practical Experiences and Lessons Learnt.

PubMed

Kropf, Stefan; Chalopin, Claire; Lindner, Dirk; Denecke, Kerstin

2017-06-28

Access to patient data within the hospital or between hospitals is still problematic since a variety of information systems is in use applying different vendor specific terminologies and underlying knowledge models. Beyond, the development of electronic health record systems (EHRSs) is time and resource consuming. Thus, there is a substantial need for a development strategy of standardized EHRSs. We are applying a reuse-oriented process model and demonstrate its feasibility and realization on a practical medical use case, which is an EHRS holding all relevant data arising in the context of treatment of tumors of the sella region. In this paper, we describe the development process and our practical experiences. Requirements towards the development of the EHRS were collected by interviews with a neurosurgeon and patient data analysis. For modelling of patient data, we selected openEHR as standard and exploited the software tools provided by the openEHR foundation. The patient information model forms the core of the development process, which comprises the EHR generation and the implementation of an EHRS architecture. Moreover, a reuse-oriented process model from the business domain was adapted to the development of the EHRS. The reuse-oriented process model is a model for a suitable abstraction of both, modeling and development of an EHR centralized EHRS. The information modeling process resulted in 18 archetypes that were aggregated in a template and built the boilerplate of the model driven development. The EHRs and the EHRS were developed by openEHR and W3C standards, tightly supported by well-established XML techniques. The GUI of the final EHRS integrates and visualizes information from various examinations, medical reports, findings and laboratory test results. We conclude that the development of a standardized overarching EHR and an EHRS is feasible using openEHR and W3C standards, enabling a high degree of semantic interoperability. The standardized representation visualizes data and can in this way support the decision process of clinicians.

Image Processing Using a Parallel Architecture.

DTIC Science & Technology

1987-12-01

ENG/87D-25 Abstract This study developed a set o± low level image processing tools on a parallel computer that allows concurrent processing of images...environment, the set of tools offers a significant reduction in the time required to perform some commonly used image processing operations. vI IMAGE...step toward developing these systems, a structured set of image processing tools was implemented using a parallel computer. More important than

Sensitometric comparisons of Insight and Ektaspeed Plus films: effects of chemical developer depletion.

PubMed

Casanova, Marcia Spinelli; Haiter-Neto, Francisco; Bóscolo, Frab Norberto; de Almeida, Solange Maria

2006-01-01

The aim of this study was to compare the sensitometric properties of Insight and Ektaspeed Plus radiographic films manually and automatically processed using fresh and depleted chemical solutions. Ten sets of each type of film were obtained (1 set = 5 films), 5 sets being manually processed and 5 sets being automatically processed. A total of 100 films (50 Ektaspeed Plus and 50 Insight film) were exposed and developed. The first two sets of each film type were developed in fresh chemicals (one set per each type of processing), on the first day of the experiment. The other sets were processed in the same progressively depleted solutions once a week until the end of experiment, which was completed within 4 weeks. Characteristic curves were constructed to compare the sensitometric properties of the films: contrast, latitude and speed. Processing solution depletion had different effects on manually and automatically developed films, which was confirmed by the changes in the form of the characteristic curves in the third week of the automatic processing and fourth week of the manual processing. Ektaspeed Plus showed 11% reduction in contrast values for manual processing and 53% for automatic processing, while Insight contrast values showed a reduction of 25% and 59%, respectively. Insight film, however, showed lesser loss of speed and lesser increase of latitude than Ektaspeed Plus. In conclusion, chemical depletion in automatic film processing was faster than in manual developing. In depleted chemicals, both types of films had an increase in latitude values and a decrease in speed and contrast. Insight was more resistant than Ektaspeed Plus to decrease in speed and latitude when processed using older chemicals, whereas contrast in Ektaspeed Plus was comparatively more stable.

Understanding the effects of time on collaborative learning processes in problem based learning: a mixed methods study.

PubMed

Hommes, J; Van den Bossche, P; de Grave, W; Bos, G; Schuwirth, L; Scherpbier, A

2014-10-01

Little is known how time influences collaborative learning groups in medical education. Therefore a thorough exploration of the development of learning processes over time was undertaken in an undergraduate PBL curriculum over 18 months. A mixed-methods triangulation design was used. First, the quantitative study measured how various learning processes developed within and over three periods in the first 1,5 study years of an undergraduate curriculum. Next, a qualitative study using semi-structured individual interviews focused on detailed development of group processes driving collaborative learning during one period in seven tutorial groups. The hierarchic multilevel analyses of the quantitative data showed that a varying combination of group processes developed within and over the three observed periods. The qualitative study illustrated development in psychological safety, interdependence, potency, group learning behaviour, social and task cohesion. Two new processes emerged: 'transactive memory' and 'convergence in mental models'. The results indicate that groups are dynamic social systems with numerous contextual influences. Future research should thus include time as an important influence on collaborative learning. Practical implications are discussed.

Modeling and Analysis of the Reverse Water Gas Shift Process for In-Situ Propellant Production

NASA Technical Reports Server (NTRS)

Whitlow, Jonathan E.

2000-01-01

This report focuses on the development of mathematical models and simulation tools developed for the Reverse Water Gas Shift (RWGS) process. This process is a candidate technology for oxygen production on Mars under the In-Situ Propellant Production (ISPP) project. An analysis of the RWGS process was performed using a material balance for the system. The material balance is very complex due to the downstream separations and subsequent recycle inherent with the process. A numerical simulation was developed for the RWGS process to provide a tool for analysis and optimization of experimental hardware, which will be constructed later this year at Kennedy Space Center (KSC). Attempts to solve the material balance for the system, which can be defined by 27 nonlinear equations, initially failed. A convergence scheme was developed which led to successful solution of the material balance, however the simplified equations used for the gas separation membrane were found insufficient. Additional more rigorous models were successfully developed and solved for the membrane separation. Sample results from these models are included in this report, with recommendations for experimental work needed for model validation.

A validation study of the 1,2-indandione reagent for operational use in the UK: Part 2 - Optimization of processing conditions.

PubMed

Nicolasora, Niko; Downham, Rory; Dyer, Rachel-May; Hussey, Laura; Luscombe, Aoife; Sears, Vaughn

2018-05-02

This paper contains details of work carried out to identify the most effective processing conditions for the optimized 1,2-indandione/zn formulation developed for use under UK conditions. Using direct measurements of fluorescence taken from test spots of amino acids and eccrine sweat during oven processing, complemented with experiments on real fingermarks, it was established that processing temperatures above 120°C in the oven were detrimental to the fluorescence of the developed mark. Alternative methods of development to oven processing were found to be effective, but less controllable. High levels of humidification were also found to be detrimental to the fluorescence of 1,2-indandione developed marks, and oven processing at 100°C and 0% relative humidity is therefore recommended for further studies. It has also been shown that 1,2-indandione can develop fingermarks at temperatures as low as 20°C, making it a candidate for use at crime scenes. Copyright © 2018. Published by Elsevier B.V.

Micromechanical Machining Processes and their Application to Aerospace Structures, Devices and Systems

NASA Technical Reports Server (NTRS)

Friedrich, Craig R.; Warrington, Robert O.

1995-01-01

Micromechanical machining processes are those micro fabrication techniques which directly remove work piece material by either a physical cutting tool or an energy process. These processes are direct and therefore they can help reduce the cost and time for prototype development of micro mechanical components and systems. This is especially true for aerospace applications where size and weight are critical, and reliability and the operating environment are an integral part of the design and development process. The micromechanical machining processes are rapidly being recognized as a complementary set of tools to traditional lithographic processes (such as LIGA) for the fabrication of micromechanical components. Worldwide efforts in the U.S., Germany, and Japan are leading to results which sometimes rival lithography at a fraction of the time and cost. Efforts to develop processes and systems specific to aerospace applications are well underway.

Modeling Business Processes in Public Administration

NASA Astrophysics Data System (ADS)

Repa, Vaclav

During more than 10 years of its existence business process modeling became a regular part of organization management practice. It is mostly regarded. as a part of information system development or even as a way to implement some supporting technology (for instance workflow system). Although I do not agree with such reduction of the real meaning of a business process, it is necessary to admit that information technologies play an essential role in business processes (see [1] for more information), Consequently, an information system is inseparable from a business process itself because it is a cornerstone of the general basic infrastructure of a business. This fact impacts on all dimensions of business process management. One of these dimensions is the methodology that postulates that the information systems development provide the business process management with exact methods and tools for modeling business processes. Also the methodology underlying the approach presented in this paper has its roots in the information systems development methodology.

The Establishment of a New Friction Stir Welding Process Development Facility at NASA/MSFC

NASA Technical Reports Server (NTRS)

Carter, Robert W.

2009-01-01

Full-scale weld process development is being performed at MSFC to develop the tools, fixtures, and facilities necessary for Ares I production. Full scale development in-house at MSFC fosters technical acuity within the NASA engineering community, and allows engineers to identify and correct tooling and equipment shortcomings before they become problems on the production floor. Finally, while the new weld process development facility is currently being outfitted in support of Ares I development, it has been established to support all future Constellation Program needs. In particular, both the RWT and VWT were sized with the larger Ares V hardware in mind.

Investigation of charge coupled device correlation techniques

NASA Technical Reports Server (NTRS)

Lampe, D. R.; Lin, H. C.; Shutt, T. J.

1978-01-01

Analog Charge Transfer Devices (CTD's) offer unique advantages to signal processing systems, which often have large development costs, making it desirable to define those devices which can be developed for general system's use. Such devices are best identified and developed early to give system's designers some interchangeable subsystem blocks, not requiring additional individual development for each new signal processing system. The objective of this work is to describe a discrete analog signal processing device with a reasonably broad system use and to implement its design, fabrication, and testing.

HARM processing techniques for MEMS and MOEMS devices using bonded SOI substrates and DRIE

NASA Astrophysics Data System (ADS)

Gormley, Colin; Boyle, Anne; Srigengan, Viji; Blackstone, Scott C.

2000-08-01

Silicon-on-Insulator (SOI) MEMS devices (1) are rapidly gaining popularity in realizing numerous solutions for MEMS, especially in the optical and inertia application fields. BCO recently developed a DRIE trench etch, utilizing the Bosch process, and refill process for high voltage dielectric isolation integrated circuits on thick SOI substrates. In this paper we present our most recently developed DRIE processes for MEMS and MOEMS devices. These advanced etch techniques are initially described and their integration with silicon bonding demonstrated. This has enabled process flows that are currently being utilized to develop optical router and filter products for fiber optics telecommunications and high precision accelerometers.

Quality-by-Design (QbD): An integrated process analytical technology (PAT) approach for a dynamic pharmaceutical co-precipitation process characterization and process design space development.

PubMed

Wu, Huiquan; White, Maury; Khan, Mansoor A

2011-02-28

The aim of this work was to develop an integrated process analytical technology (PAT) approach for a dynamic pharmaceutical co-precipitation process characterization and design space development. A dynamic co-precipitation process by gradually introducing water to the ternary system of naproxen-Eudragit L100-alcohol was monitored at real-time in situ via Lasentec FBRM and PVM. 3D map of count-time-chord length revealed three distinguishable process stages: incubation, transition, and steady-state. The effects of high risk process variables (slurry temperature, stirring rate, and water addition rate) on both derived co-precipitation process rates and final chord-length-distribution were evaluated systematically using a 3(3) full factorial design. Critical process variables were identified via ANOVA for both transition and steady state. General linear models (GLM) were then used for parameter estimation for each critical variable. Clear trends about effects of each critical variable during transition and steady state were found by GLM and were interpreted using fundamental process principles and Nyvlt's transfer model. Neural network models were able to link process variables with response variables at transition and steady state with R(2) of 0.88-0.98. PVM images evidenced nucleation and crystal growth. Contour plots illustrated design space via critical process variables' ranges. It demonstrated the utility of integrated PAT approach for QbD development. Published by Elsevier B.V.

Impact of the Bologna Process on Turkish Higher Education: The Case of Izmir University of Economics

ERIC Educational Resources Information Center

Esen, Oguz; Gürleyen, Isik; Binatli, Ayla Ogus

2012-01-01

This article focuses on Turkey's experience of the Bologna Process. Its main objective is to contribute to the literature on the impact of Bologna Process on national higher education systems regarding the issue of curricula development. It argues that the Bologna Process has fostered development of transparent and systematic curricula, which…

Institutional Planning as a Participative Process: A Community College Self Study.

ERIC Educational Resources Information Center

Sturtz, Alan J.

In 1981, South Central Community College received funding to develop a long-range planning process. The process was to be modeled on the 3-year planning cycle developed by the National Center for Higher Education Management Systems and to use the college's existing organizational structure. Since November 1981, the planning process at the college…

The standards process: X3 information processing systems

NASA Technical Reports Server (NTRS)

Emard, Jean-Paul

1993-01-01

The topics are presented in viewgraph form and include the following: International Organization for Standards (ISO); International Electrotechnical Committee (IEC); ISO/IEC Joint Technical Committee 1 (JTC-1); U.S. interface to JTC-1; ANSI; national organizations; U.S. standards development processes; national and international standards developing organizations; regional organizations; and X3 information processing systems.

Learning Processes of Students in Pre-Vocational Secondary Education: Relations between Goal Orientations, Information Processing Strategies and Development of Conceptual Knowledge

ERIC Educational Resources Information Center

Koopman, Maaike; Den Brok, Perry; Beijaard, Douwe; Teune, Peter

2011-01-01

The purpose of this study was to investigate relations between goal orientations, information processing strategies and development of conceptual knowledge of pre-vocational secondary education students (n = 719; 14 schools). Students' preferences for certain types of goals and information processing strategies were examined using questionnaires.…

Welding Development: Marshall Space Flight Center

NASA Technical Reports Server (NTRS)

Ding, Jeff

2007-01-01

This paper presents the basic understanding of the friction stir welding process. It covers process description, pin tool operation and materials, metal flow theory, mechanical properties, and materials welded using the process. It also discusses the thermal stir welding process and the differences between thermal stir and friction stir welding. MSFC weld tools used for development are also presented.

Study of residue type defect formation mechanism and the effect of advanced defect reduction (ADR) rinse process

NASA Astrophysics Data System (ADS)

Arima, Hiroshi; Yoshida, Yuichi; Yoshihara, Kosuke; Shibata, Tsuyoshi; Kushida, Yuki; Nakagawa, Hiroki; Nishimura, Yukio; Yamaguchi, Yoshikazu

2009-03-01

Residue type defect is one of yield detractors in lithography process. It is known that occurrence of the residue type defect is dependent on resist development process and the defect is reduced by optimized rinsing condition. However, the defect formation is affected by resist materials and substrate conditions. Therefore, it is necessary to optimize the development process condition by each mask level. Those optimization steps require a large amount of time and effort. The formation mechanism is investigated from viewpoint of both material and process. The defect formation is affected by resist material types, substrate condition and development process condition (D.I.W. rinse step). Optimized resist formulation and new rinse technology significantly reduce the residue type defect.

Software Development and Test Methodology for a Distributed Ground System

NASA Technical Reports Server (NTRS)

Ritter, George; Guillebeau, Pat; McNair, Ann R. (Technical Monitor)

2002-01-01

The Marshall Space Flight Center's (MSFC) Payload Operations Center (POC) ground system has evolved over a period of about 10 years. During this time the software processes have migrated from more traditional to more contemporary development processes in an effort to minimize unnecessary overhead while maximizing process benefits. The Software processes that have evolved still emphasize requirements capture, software configuration management, design documenting, and making sure the products that have been developed are accountable to initial requirements. This paper will give an overview of how the Software Processes have evolved, highlighting the positives as well as the negatives. In addition, we will mention the COTS tools that have been integrated into the processes and how the COTS have provided value to the project.

24 CFR 2002.7 - OIG processing of requests.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 24 Housing and Urban Development 5 2010-04-01 2010-04-01 false OIG processing of requests. 2002.7 Section 2002.7 Housing and Urban Development Regulations Relating to Housing and Urban Development (Continued) OFFICE OF INSPECTOR GENERAL, DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT AVAILABILITY OF...

CORPEX{reg_sign} NORM decontamination process

DOE Office of Scientific and Technical Information (OSTI.GOV)

Azrak, R.G.

1997-02-01

This paper describes a commecial process which has been developed for application to the remediation of NORM deposits on metal parts or embedded in scales on such parts. The process employs a registered chemical process, involving non-RCRA regulated chemicals, which can remove fixed {sup 226,228}Radium, {sup 210}Lead, and {sup 210}Polonium. The author describes the capabilities of the chemical process which has been developed, the way it is offered to potential customers as a practical process, and numerous examples of its application in the field.

Low cost solar array project. Experimental process system development unit for producing semiconductor-grade silicon using the silane-to-silicon process

NASA Technical Reports Server (NTRS)

1980-01-01

Technical activities are reported in the design of process, facilities, and equipment for producing silicon at a rate and price comensurate with production goals for low cost solar cell modules. The silane-silicone process has potential for providing high purity poly-silicon on a commercial scale at a price of fourteen dollars per kilogram by 1986, (1980 dollars). Commercial process, economic analysis, process support research and development, and quality control are discussed.

Development of integrated control system for smart factory in the injection molding process

NASA Astrophysics Data System (ADS)

Chung, M. J.; Kim, C. Y.

2018-03-01

In this study, we proposed integrated control system for automation of injection molding process required for construction of smart factory. The injection molding process consists of heating, tool close, injection, cooling, tool open, and take-out. Take-out robot controller, image processing module, and process data acquisition interface module are developed and assembled to integrated control system. By adoption of integrated control system, the injection molding process can be simplified and the cost for construction of smart factory can be inexpensive.

Development and Validation of a Shear Punch Test Fixture

DTIC Science & Technology

2013-08-01

composites (MMC) manufactured by friction stir processing (FSP) that are being developed as part of a Technology Investment Fund (TIF) project, as the...leading a team of government departments and academics to develop a friction stir processing (FSP) based procedure to create metal matrix composite... friction stir process to fabricate surface metal matrix composites in aluminum alloys for potential application in light armoured vehicles. The

Measuring the software process and product: Lessons learned in the SEL

NASA Technical Reports Server (NTRS)

Basili, V. R.

1985-01-01

The software development process and product can and should be measured. The software measurement process at the Software Engineering Laboratory (SEL) has taught a major lesson: develop a goal-driven paradigm (also characterized as a goal/question/metric paradigm) for data collection. Project analysis under this paradigm leads to a design for evaluating and improving the methodology of software development and maintenance.

Clinical ethics protocols in the clinical ethics committees of Madrid.

PubMed

Herreros, Benjamin; Ramnath, Venktesh R; Bishop, Laura; Pintor, Emilio; Martín, María Dolores; Sánchez-González, Miguel A

2014-03-01

Currently, The nature and scope of Clinical Ethics Protocols (CEPs) in Madrid (Spain) are not well understood. The main objective is to describe the features of 'guideline/recommendation' type CEPs that have been or are being developed by existing Clinical Ethics Committees (CECs) in Madrid. Secondary objectives include characterisation of those CECs that have been the most prolific in reference to CEP creation and implementation and identification of any trends in future CEP development. We collected CEPs produced and in process by CECs accredited in the public hospitals in Madrid, Spain, from 1996 to 2008. CECs developed 30 CEPs, with 10 more in process. The most common topic is refusal of treatment (seven CEPs developed; two in process). If CEPs addressing terminal illness, Do-Not-Resuscitate orders and advance directives are placed into a separate 'ethical problems at the end of life' category, this CEP subject emerges as the most common (eight developed; four in process). There is a relationship between the age of the CEC and the development of CEPs (the oldest CECs have developed more CEPs). CECs now seem to be more likely to engage in CEP development. The CECs in Madrid, Spain, have developed a significant number of CEPs (30 in total and 10 in process) and there is a trend towards continued development. The most frequent topics are ethical problems at the end of life and refusal of treatment by the patient.

The Modular Modeling System (MMS): User's Manual

USGS Publications Warehouse

Leavesley, G.H.; Restrepo, Pedro J.; Markstrom, S.L.; Dixon, M.; Stannard, L.G.

1996-01-01

The Modular Modeling System (MMS) is an integrated system of computer software that has been developed to provide the research and operational framework needed to support development, testing, and evaluation of physical-process algorithms and to facilitate integration of user-selected sets of algorithms into operational physical-process models. MMS uses a module library that contains modules for simulating a variety of water, energy, and biogeochemical processes. A model is created by selectively coupling the most appropriate modules from the library to create a 'suitable' model for the desired application. Where existing modules do not provide appropriate process algorithms, new modules can be developed. The MMS user's manual provides installation instructions and a detailed discussion of system concepts, module development, and model development and application using the MMS graphical user interface.

Consolidated fuel reprocessing program

NASA Astrophysics Data System (ADS)

1985-02-01

Improved processes and components for the Breeder Reprocessing Engineering Test (BRET) were identified and developed as well as the design, procurement and development of prototypic equipment. The integrated testing of process equipment and flowsheets prototypical of a pilot scale full reprocessing plant, and also for testing prototypical remote features of specific complex components in the system are provided. Information to guide the long range activities of the Consolidated Fuel Reprocessing Program (CERP), a focal point for foreign exchange activities, and support in specialized technical areas are described. Research and development activities in HTGR fuel treatment technology are being conducted. Head-end process and laboratory scale development efforts, as well as studies specific to HTGR fuel, are reported. The development of off-gas treatment processes has generic application to fuel reprocessing, progress in this work is also reported.

The jABC Approach to Rigorous Collaborative Development of SCM Applications

NASA Astrophysics Data System (ADS)

Hörmann, Martina; Margaria, Tiziana; Mender, Thomas; Nagel, Ralf; Steffen, Bernhard; Trinh, Hong

Our approach to the model-driven collaborative design of IKEA's P3 Delivery Management Process uses the jABC [9] for model driven mediation and choreography to complement a RUP-based (Rational Unified Process) development process. jABC is a framework for service development based on Lightweight Process Coordination. Users (product developers and system/software designers) easily develop services and applications by composing reusable building-blocks into (flow-) graph structures that can be animated, analyzed, simulated, verified, executed, and compiled. This way of handling the collaborative design of complex embedded systems has proven to be effective and adequate for the cooperation of non-programmers and non-technical people, which is the focus of this contribution, and it is now being rolled out in the operative practice.

Small Business Apparel Retailing in Jamaica: An Exploratory Investigation into Product Development Processes and Practices

ERIC Educational Resources Information Center

Johnson-Leslie, Natalie; Gaskill, LuAnn R.

2006-01-01

While the process and practices of retail product development in developed countries have been documented, a void exists in descriptive analysis regarding retail product development in an international setting. The primary purpose of this study was to explore small business apparel retailing, and specifically the retail product development process…

Developmental State Policy, Educational Development, and Economic Development: Policy Processes in South Korea (1961-1979)

ERIC Educational Resources Information Center

Kim, Ki Su

2012-01-01

This paper explores two inter-connected issues--the state's role in educational development and educational contribution to economic development--in the policy processes entailed by the South Korean state's pursuit of economic development during the Park Chung Hi era, 1961-1979. It disputes the statist view that South Korea's economic development…

Annotation: Development of facial expression recognition from childhood to adolescence: behavioural and neurological perspectives.

PubMed

Herba, Catherine; Phillips, Mary

2004-10-01

Intact emotion processing is critical for normal emotional development. Recent advances in neuroimaging have facilitated the examination of brain development, and have allowed for the exploration of the relationships between the development of emotion processing abilities, and that of associated neural systems. A literature review was performed of published studies examining the development of emotion expression recognition in normal children and psychiatric populations, and of the development of neural systems important for emotion processing. Few studies have explored the development of emotion expression recognition throughout childhood and adolescence. Behavioural studies suggest continued development throughout childhood and adolescence (reflected by accuracy scores and speed of processing), which varies according to the category of emotion displayed. Factors such as sex, socio-economic status, and verbal ability may also affect this development. Functional neuroimaging studies in adults highlight the role of the amygdala in emotion processing. Results of the few neuroimaging studies in children have focused on the role of the amygdala in the recognition of fearful expressions. Although results are inconsistent, they provide evidence throughout childhood and adolescence for the continued development of and sex differences in amygdalar function in response to fearful expressions. Studies exploring emotion expression recognition in psychiatric populations of children and adolescents suggest deficits that are specific to the type of disorder and to the emotion displayed. Results from behavioural and neuroimaging studies indicate continued development of emotion expression recognition and neural regions important for this process throughout childhood and adolescence. Methodological inconsistencies and disparate findings make any conclusion difficult, however. Further studies are required examining the relationship between the development of emotion expression recognition and that of underlying neural systems, in particular subcortical and prefrontal cortical structures. These will inform understanding of the neural bases of normal and abnormal emotional development, and aid the development of earlier interventions for children and adolescents with psychiatric disorders.

A Pipeline Tool for CCD Image Processing

NASA Astrophysics Data System (ADS)

Bell, Jon F.; Young, Peter J.; Roberts, William H.; Sebo, Kim M.

MSSSO is part of a collaboration developing a wide field imaging CCD mosaic (WFI). As part of this project, we have developed a GUI based pipeline tool that is an integrated part of MSSSO's CICADA data acquisition environment and processes CCD FITS images as they are acquired. The tool is also designed to run as a stand alone program to process previously acquired data. IRAF tasks are used as the central engine, including the new NOAO mscred package for processing multi-extension FITS files. The STScI OPUS pipeline environment may be used to manage data and process scheduling. The Motif GUI was developed using SUN Visual Workshop. C++ classes were written to facilitate launching of IRAF and OPUS tasks. While this first version implements calibration processing up to and including flat field corrections, there is scope to extend it to other processing.

Development of pulsed processes for the manufacture of solar cells

NASA Technical Reports Server (NTRS)

Minnucci, J. A.

1978-01-01

The results of a 1-year program to develop the processes required for low-energy ion implantation for the automated production of silicon solar cells are described. The program included: (1) demonstrating state-of-the-art ion implantation equipment and designing an automated ion implanter, (2) making efforts to improve the performance of ion-implanted solar cells to 16.5 percent AM1, (3) developing a model of the pulse annealing process used in solar cell production, and (4) preparing an economic analysis of the process costs of ion implantation.

Vehicle Modeling for use in the CAFE model: Process description and modeling assumptions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moawad, Ayman; Kim, Namdoo; Rousseau, Aymeric

2016-06-01

The objective of this project is to develop and demonstrate a process that, at a minimum, provides more robust information that can be used to calibrate inputs applicable under the CAFE model’s existing structure. The project will be more fully successful if a process can be developed that minimizes the need for decision trees and replaces the synergy factors by inputs provided directly from a vehicle simulation tool. The report provides a description of the process that was developed by Argonne National Laboratory and implemented in Autonomie.

Process Monitoring Evaluation and Implementation for the Wood Abrasive Machining Process

PubMed Central

Saloni, Daniel E.; Lemaster, Richard L.; Jackson, Steven D.

2010-01-01

Wood processing industries have continuously developed and improved technologies and processes to transform wood to obtain better final product quality and thus increase profits. Abrasive machining is one of the most important of these processes and therefore merits special attention and study. The objective of this work was to evaluate and demonstrate a process monitoring system for use in the abrasive machining of wood and wood based products. The system developed increases the life of the belt by detecting (using process monitoring sensors) and removing (by cleaning) the abrasive loading during the machining process. This study focused on abrasive belt machining processes and included substantial background work, which provided a solid base for understanding the behavior of the abrasive, and the different ways that the abrasive machining process can be monitored. In addition, the background research showed that abrasive belts can effectively be cleaned by the appropriate cleaning technique. The process monitoring system developed included acoustic emission sensors which tended to be sensitive to belt wear, as well as platen vibration, but not loading, and optical sensors which were sensitive to abrasive loading. PMID:22163477

Processes involved in the development of latent fingerprints using the cyanoacrylate fuming method.

PubMed

Lewis, L A; Smithwick, R W; Devault, G L; Bolinger, B; Lewis, S A

2001-03-01

Chemical processes involved in the development of latent fingerprints using the cyanoacrylate fuming method have been studied. Two major types of latent prints have been investigated-clean and oily prints. Scanning electron microscopy (SEM) has been used as a tool for determining the morphology of the polymer developed separately on clean and oily prints after cyanoacrylate fuming. A correlation between the chemical composition of an aged latent fingerprint, prior to development, and the quality of a developed fingerprint has been observed in the morphology. The moisture in the print prior to fuming has been found to be more important than the moisture in the air during fuming for the development of a useful latent print. In addition, the amount of time required to develop a high quality latent print has been found to be within 2 min. The cyanoacrylate polymerization process is extremely rapid. When heat is used to accelerate the fuming process, typically a period of 2 min is required to develop the print. The optimum development time depends upon the concentration of cyanoacrylate vapors within the enclosure.

Missile signal processing common computer architecture for rapid technology upgrade

NASA Astrophysics Data System (ADS)

Rabinkin, Daniel V.; Rutledge, Edward; Monticciolo, Paul

2004-10-01

Interceptor missiles process IR images to locate an intended target and guide the interceptor towards it. Signal processing requirements have increased as the sensor bandwidth increases and interceptors operate against more sophisticated targets. A typical interceptor signal processing chain is comprised of two parts. Front-end video processing operates on all pixels of the image and performs such operations as non-uniformity correction (NUC), image stabilization, frame integration and detection. Back-end target processing, which tracks and classifies targets detected in the image, performs such algorithms as Kalman tracking, spectral feature extraction and target discrimination. In the past, video processing was implemented using ASIC components or FPGAs because computation requirements exceeded the throughput of general-purpose processors. Target processing was performed using hybrid architectures that included ASICs, DSPs and general-purpose processors. The resulting systems tended to be function-specific, and required custom software development. They were developed using non-integrated toolsets and test equipment was developed along with the processor platform. The lifespan of a system utilizing the signal processing platform often spans decades, while the specialized nature of processor hardware and software makes it difficult and costly to upgrade. As a result, the signal processing systems often run on outdated technology, algorithms are difficult to update, and system effectiveness is impaired by the inability to rapidly respond to new threats. A new design approach is made possible three developments; Moore's Law - driven improvement in computational throughput; a newly introduced vector computing capability in general purpose processors; and a modern set of open interface software standards. Today's multiprocessor commercial-off-the-shelf (COTS) platforms have sufficient throughput to support interceptor signal processing requirements. This application may be programmed under existing real-time operating systems using parallel processing software libraries, resulting in highly portable code that can be rapidly migrated to new platforms as processor technology evolves. Use of standardized development tools and 3rd party software upgrades are enabled as well as rapid upgrade of processing components as improved algorithms are developed. The resulting weapon system will have a superior processing capability over a custom approach at the time of deployment as a result of a shorter development cycles and use of newer technology. The signal processing computer may be upgraded over the lifecycle of the weapon system, and can migrate between weapon system variants enabled by modification simplicity. This paper presents a reference design using the new approach that utilizes an Altivec PowerPC parallel COTS platform. It uses a VxWorks-based real-time operating system (RTOS), and application code developed using an efficient parallel vector library (PVL). A quantification of computing requirements and demonstration of interceptor algorithm operating on this real-time platform are provided.

REPORT ON TWO PROCESS EQUIPMENT CHANGES FOR FEDERAL PAINTING FACILITIES

EPA Science Inventory

EPA's National Risk Management Research Laboratory (NRMRL) has actively participated in the Strategic Environmental Research and Development Program (SERDP) to develop innovative technologies and processes for the reduction of environmental pollution. Technology developments fro...

Measuring the impact of computer resource quality on the software development process and product

NASA Technical Reports Server (NTRS)

Mcgarry, Frank; Valett, Jon; Hall, Dana

1985-01-01

The availability and quality of computer resources during the software development process was speculated to have measurable, significant impact on the efficiency of the development process and the quality of the resulting product. Environment components such as the types of tools, machine responsiveness, and quantity of direct access storage may play a major role in the effort to produce the product and in its subsequent quality as measured by factors such as reliability and ease of maintenance. During the past six years, the NASA Goddard Space Flight Center has conducted experiments with software projects in an attempt to better understand the impact of software development methodologies, environments, and general technologies on the software process and product. Data was extracted and examined from nearly 50 software development projects. All were related to support of satellite flight dynamics ground-based computations. The relationship between computer resources and the software development process and product as exemplified by the subject NASA data was examined. Based upon the results, a number of computer resource-related implications are provided.

The development of emotion perception in face and voice during infancy.

PubMed

Grossmann, Tobias

2010-01-01

Interacting with others by reading their emotional expressions is an essential social skill in humans. How this ability develops during infancy and what brain processes underpin infants' perception of emotion in different modalities are the questions dealt with in this paper. Literature review. The first part provides a systematic review of behavioral findings on infants' developing emotion-reading abilities. The second part presents a set of new electrophysiological studies that provide insights into the brain processes underlying infants' developing abilities. Throughout, evidence from unimodal (face or voice) and multimodal (face and voice) processing of emotion is considered. The implications of the reviewed findings for our understanding of developmental models of emotion processing are discussed. The reviewed infant data suggest that (a) early in development, emotion enhances the sensory processing of faces and voices, (b) infants' ability to allocate increased attentional resources to negative emotional information develops earlier in the vocal domain than in the facial domain, and (c) at least by the age of 7 months, infants reliably match and recognize emotional information across face and voice.

Chinese Scientific and Technical Information Institutions: Development and Perspective

ERIC Educational Resources Information Center

Yanning, Zheng

2011-01-01

The collection, storage, processing, and dissemination of scientific and technical information make an important basis for economic and social development as well as for scientific development. A nation has to develop the right mechanisms and modalities to collect, store, process, and disseminate scientific and technical information tailored to…

Organizational Development: Values, Process, and Technology.

ERIC Educational Resources Information Center

Margulies, Newton; Raia, Anthony P.

The current state-of-the-art of organizational development is the focus of this book. The five parts into which the book is divided are as follows: Part One--Introduction (Organizational Development in Perspective--the nature, values, process, and technology of organizational development); Part Two--The Components of Organizational Developments…

Guide Book for Curriculum Development and Adaptation. Draft.

ERIC Educational Resources Information Center

United Nations Educational, Scientific and Cultural Organization, Bangkok (Thailand). Principal Regional Office for Asia and the Pacific.

This guide was developed as a cooperative initiative by UNESCO member countries to provide information about the process of development and adaptation of a flexible, competency-based curriculum, especially in vocational education. The guidebook outlines an exemplar process of education organized in 11 stages of design and development based on…

Cognitive Processes and Theory Development: A Reply to Spencer and Karmiloff-Smith.

ERIC Educational Resources Information Center

Gellatly, Angus

1997-01-01

Focuses on the role of enculturation in children's cognitive development by distinguishing between, and elaborating upon, three factors: (1) cultural context; (2) cognitive contents; and (3) cognitive processes. Suggests problems inherent in positing homologies between children's cognitive development and the historical development of scientific…

Developing and Implementing a Process for the Review of Nonacademic Units.

ERIC Educational Resources Information Center

Brown, Marilyn K.

1989-01-01

A major research university's recently developed process for systematic evaluation of nonacademic units is described, and the steps in its development and implementation are outlined: review of literature on organizational effectiveness; survey of peer institutions; development of guidelines for review; and implementation in several campus units.…

Scriptotherapy: A Technique for Conflict Resolution.

ERIC Educational Resources Information Center

Johnson, Roy E.

Part 1 of this dissertation contains an introductory chapter entitled, "The Children Shout Fight Fight," in which the written analytical process named Scriptotherapy is discussed. In Chapter 1, "Early Adolescence an Ongoing Process," early adolescent growth and development, the process of moral development, temperament types…

Our Application of ISO 9000.

ERIC Educational Resources Information Center

Hammond, Jane

2000-01-01

Since a large, underfunded urban Colorado district initiated ISO 9000 reforms, administrators and staff have reviewed 14 central-office departments' processes to improve efficiency and enhance student outcomes. Jefferson County has saved $900,000 annually on purchasing processes, developed a quality curriculum-development process, and improved…

DEVELOPMENT OF CAPE-OPEN COMPLIANT PROCESS MODELING COMPONENTS IN MICROSOFT .NET

EPA Science Inventory

The CAPE-OPEN middleware standards were created to allow process modeling components (PMCs) developed by third parties to be used in any process modeling environment (PME) utilizing these standards. The CAPE-OPEN middleware specifications were based upon both Microsoft's Compone...

Tailoring advanced technologies for air traffic control : the importance of the development process

DOT National Transportation Integrated Search

1995-04-01

This paper describes a process that is currently being applied to the : development and assessment of an advanced air traffic control (ATC) system, the : Center TRACON Automation System (CTAS). This process deviates from established : practices of AT...

ISO 9000 and/or Systems Engineering Capability Maturity Model?

NASA Technical Reports Server (NTRS)

Gholston, Sampson E.

2002-01-01

For businesses and organizations to remain competitive today they must have processes and systems in place that will allow them to first identify customer needs and then develop products/processes that will meet or exceed the customers needs and expectations. Customer needs, once identified, are normally stated as requirements. Designers can then develop products/processes that will meet these requirements. Several functions, such as quality management and systems engineering management are used to assist product development teams in the development process. Both functions exist in all organizations and both have a similar objective, which is to ensure that developed processes will meet customer requirements. Are efforts in these organizations being duplicated? Are both functions needed by organizations? What are the similarities and differences between the functions listed above? ISO 9000 is an international standard of goods and services. It sets broad requirements for the assurance of quality and for management's involvement. It requires organizations to document the processes and to follow these documented processes. ISO 9000 gives customers assurance that the suppliers have control of the process for product development. Systems engineering can broadly be defined as a discipline that seeks to ensure that all requirements for a system are satisfied throughout the life of the system by preserving their interrelationship. The key activities of systems engineering include requirements analysis, functional analysis/allocation, design synthesis and verification, and system analysis and control. The systems engineering process, when followed properly, will lead to higher quality products, lower cost products, and shorter development cycles. The System Engineering Capability Maturity Model (SE-CMM) will allow companies to measure their system engineering capability and continuously improve those capabilities. ISO 9000 and SE-CMM seem to have a similar objective, which is to document the organization's processes and certify to potential customers the capability of a supplier to control the processes that determine the quality of the product or services being produced. The remaining sections of this report examine the differences and similarities between ISO 9000 and SE-CMM and make recommendations for implementation.

Assessment Methodology for Process Validation Lifecycle Stage 3A.

PubMed

Sayeed-Desta, Naheed; Pazhayattil, Ajay Babu; Collins, Jordan; Chen, Shu; Ingram, Marzena; Spes, Jana

2017-07-01

The paper introduces evaluation methodologies and associated statistical approaches for process validation lifecycle Stage 3A. The assessment tools proposed can be applied to newly developed and launched small molecule as well as bio-pharma products, where substantial process and product knowledge has been gathered. The following elements may be included in Stage 3A: number of 3A batch determination; evaluation of critical material attributes, critical process parameters, critical quality attributes; in vivo in vitro correlation; estimation of inherent process variability (IPV) and PaCS index; process capability and quality dashboard (PCQd); and enhanced control strategy. US FDA guidance on Process Validation: General Principles and Practices, January 2011 encourages applying previous credible experience with suitably similar products and processes. A complete Stage 3A evaluation is a valuable resource for product development and future risk mitigation of similar products and processes. Elements of 3A assessment were developed to address industry and regulatory guidance requirements. The conclusions made provide sufficient information to make a scientific and risk-based decision on product robustness.

Development of Solvent Extraction Approach to Recycle Enriched Molybdenum Material

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tkac, Peter; Brown, M. Alex; Sen, Sujat

2016-06-01

Argonne National Laboratory, in cooperation with Oak Ridge National Laboratory and NorthStar Medical Technologies, LLC, is developing a recycling process for a solution containing valuable Mo-100 or Mo-98 enriched material. Previously, Argonne had developed a recycle process using a precipitation technique. However, this process is labor intensive and can lead to production of large volumes of highly corrosive waste. This report discusses an alternative process to recover enriched Mo in the form of ammonium heptamolybdate by using solvent extraction. Small-scale experiments determined the optimal conditions for effective extraction of high Mo concentrations. Methods were developed for removal of ammonium chloridemore » from the molybdenum product of the solvent extraction process. In large-scale experiments, very good purification from potassium and other elements was observed with very high recovery yields (~98%).« less

The GA sulfur-iodine water-splitting process - A status report

NASA Astrophysics Data System (ADS)

Besenbruch, G. E.; Chiger, H. D.; McCorkle, K. H.; Norman, J. H.; Rode, J. S.; Schuster, J. R.; Trester, P. W.

The development of a sulfur-iodine thermal water splitting cycle is described. The process features a 50% thermal efficiency, plus all liquid and gas handling. Basic chemical investigations comprised the development of multitemperature and multistage sulfuric acid boost reactors, defining the phase behavior of the HI/I2/H2O/H3PO4 mixtures, and development of a decomposition process for hydrogen iodide in the liquid phase. Initial process engineering studies have led to a 47% efficiency, improvements of 2% projected, followed by coupling high-temperature solar concentrators to the splitting processes to reduce power requirements. Conceptual flowsheets developed from bench models are provided; materials investigations have concentrated on candidates which can withstand corrosive mixtures at temperatures up to 400 deg K, with Hastelloy C-276 exhibiting the best properties for containment and heat exchange to I2.

Friction Stir Welding Development at NASA-Marshall Space Flight Center

NASA Technical Reports Server (NTRS)

Bhat, Biliyar N.; Carter, Robert W.; Ding, Robert J.; Lawless, Kirby G.; Nunes, Arthur C., Jr.; Russell, Carolyn K.; Shah, Sandeep R.

2001-01-01

This paper presents an overview of friction stir welding (FSW) process development and applications at Marshall Space Flight Center (MSFC). FSW process development started as a laboratory curiosity but soon found support from many users. The FSW process advanced very quickly and has found many applications both within and outside the aerospace industry. It is currently being adapted for joining key elements of the Space Shuttle External Tank for improved producibility and reliability. FSW process modeling is done to better understand and improve the process. Special tools have been developed to weld variable thickness materials including thin and thick materials. FSW is now being applied to higher temperature materials such as copper and to advanced materials such as metal matrix composites. FSW technology is being successfully transferred from MSFC laboratory to shop floors of many commercial companies.

The GA sulfur-iodine water-splitting process - A status report

NASA Technical Reports Server (NTRS)

Besenbruch, G. E.; Chiger, H. D.; Mccorkle, K. H.; Norman, J. H.; Rode, J. S.; Schuster, J. R.; Trester, P. W.

1981-01-01

The development of a sulfur-iodine thermal water splitting cycle is described. The process features a 50% thermal efficiency, plus all liquid and gas handling. Basic chemical investigations comprised the development of multitemperature and multistage sulfuric acid boost reactors, defining the phase behavior of the HI/I2/H2O/H3PO4 mixtures, and development of a decomposition process for hydrogen iodide in the liquid phase. Initial process engineering studies have led to a 47% efficiency, improvements of 2% projected, followed by coupling high-temperature solar concentrators to the splitting processes to reduce power requirements. Conceptual flowsheets developed from bench models are provided; materials investigations have concentrated on candidates which can withstand corrosive mixtures at temperatures up to 400 deg K, with Hastelloy C-276 exhibiting the best properties for containment and heat exchange to I2.

Promoting evidence informed policy making in Nigeria: a review of the maternal, newborn and child health policy development process

PubMed Central

Uneke, Chigozie Jesse; Sombie, Issiaka; Keita, Namoudou; Lokossou, Virgil; Johnson, Ermel; Ongolo-Zogo, Pierre; Uro-Chukwu, Henry Chukwuemeka

2017-01-01

Background: There is increasing recognition worldwide that health policymaking process should be informed by best available evidence. The purpose of this study was to review the policy documents on maternal, newborn and child health (MNCH) in Nigeria to assess the extent evidence informed policymaking mechanism was employed in the policy formulation process. Methods: A comprehensive literature search of websites of the Federal Ministry of Health(FMOH) Nigeria and other related ministries and agencies for relevant health policy documents related to MNCH from year 2000 to 2015 was undertaken. The following terms were used interchangeably for the literature search: maternal, child, newborn, health, policy, strategy,framework, guidelines, Nigeria. Results: Of the 108 policy documents found, 19 (17.6%) of them fulfilled the study inclusion criteria. The policy documents focused on the major aspects of maternal health improvements in Nigeria such as reproductive health, anti-malaria treatment, development of adolescent and young people health, mid wives service scheme, prevention of mother to child transmission of HIV and family planning. All the policy documents indicated that a consultative process of collection of input involving multiple stakeholders was employed, but there was no rigorous scientific process of assessing, adapting, synthesizing and application of scientific evidence reported in the policy development process. Conclusion: It is recommended that future health policy development process on MNCH should follow evidence informed policy making process and clearly document the process of incorporating evidence in the policy development. PMID:29085794

The development of a science process assessment for fourth-grade students

NASA Astrophysics Data System (ADS)

Smith, Kathleen A.; Welliver, Paul W.

In this study, a multiple-choice test entitled the Science Process Assessment was developed to measure the science process skills of students in grade four. Based on the Recommended Science Competency Continuum for Grades K to 6 for Pennsylvania Schools, this instrument measured the skills of (1) observing, (2) classifying, (3) inferring, (4) predicting, (5) measuring, (6) communicating, (7) using space/time relations, (8) defining operationally, (9) formulating hypotheses, (10) experimenting, (11) recognizing variables, (12) interpreting data, and (13) formulating models. To prepare the instrument, classroom teachers and science educators were invited to participate in two science education workshops designed to develop an item bank of test questions applicable to measuring process skill learning. Participants formed writing teams and generated 65 test items representing the 13 process skills. After a comprehensive group critique of each item, 61 items were identified for inclusion into the Science Process Assessment item bank. To establish content validity, the item bank was submitted to a select panel of science educators for the purpose of judging item acceptability. This analysis yielded 55 acceptable test items and produced the Science Process Assessment, Pilot 1. Pilot 1 was administered to 184 fourth-grade students. Students were given a copy of the test booklet; teachers read each test aloud to the students. Upon completion of this first administration, data from the item analysis yielded a reliability coefficient of 0.73. Subsequently, 40 test items were identified for the Science Process Assessment, Pilot 2. Using the test-retest method, the Science Process Assessment, Pilot 2 (Test 1 and Test 2) was administered to 113 fourth-grade students. Reliability coefficients of 0.80 and 0.82, respectively, were ascertained. The correlation between Test 1 and Test 2 was 0.77. The results of this study indicate that (1) the Science Process Assessment, Pilot 2, is a valid and reliable instrument applicable to measuring the science process skills of students in grade four, (2) using educational workshops as a means of developing item banks of test questions is viable and productive in the test development process, and (3) involving classroom teachers and science educators in the test development process is educationally efficient and effective.

How drugs are developed and approved by the FDA: current process and future directions.

PubMed

Ciociola, Arthur A; Cohen, Lawrence B; Kulkarni, Prasad

2014-05-01

This article provides an overview of FDA's regulatory processes for drug development and approval, and the estimated costs associated with the development of a drug, and also examines the issues and challenges facing the FDA in the near future. A literature search was performed using MEDLINE to summarize the current FDA drug approval processes and future directions. MEDLINE was further utilized to search for all cost analysis studies performed to evaluate the pharmaceutical industry R&D productivity and drug development cost estimates. While the drug approval process remains at high risk and spans over multiple years, the FDA drug review and approval process has improved, with the median approval time for new molecular drugs been reduced from 19 months to 10 months. The overall cost to development of a drug remains quite high and has been estimated to range from $868M to $1,241M USD. Several new laws have been enacted, including the FDA Safety and Innovation Act (FDASIA) of 2013, which is designed to improve the drug approval process and enhance access to new medicines. The FDA's improved processes for drug approval and post-market surveillance have achieved the goal of providing patients with timely access to effective drugs while minimizing the risk of drug-related harm. The FDA drug approval process is not without controversy, as a number of well-known gastroenterology drugs have been withdrawn from the US market over the past few years. With the approval of the new FDASIA law, the FDA will continue to improve their processes and, working together with the ACG through the FDA-Related Matters Committee, continue to develop safe and effective drugs for our patients.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Simpson, L.

ITN Energy Systems, Inc., and Global Solar Energy, Inc., with the assistance of NREL's PV Manufacturing R&D program, have continued the advancement of CIGS production technology through the development of trajectory-oriented predictive/control models, fault-tolerance control, control-platform development, in-situ sensors, and process improvements. Modeling activities to date include the development of physics-based and empirical models for CIGS and sputter-deposition processing, implementation of model-based control, and application of predictive models to the construction of new evaporation sources and for control. Model-based control is enabled through implementation of reduced or empirical models into a control platform. Reliability improvement activities include implementation of preventivemore » maintenance schedules; detection of failed sensors/equipment and reconfiguration to continue processing; and systematic development of fault prevention and reconfiguration strategies for the full range of CIGS PV production deposition processes. In-situ sensor development activities have resulted in improved control and indicated the potential for enhanced process status monitoring and control of the deposition processes. Substantial process improvements have been made, including significant improvement in CIGS uniformity, thickness control, efficiency, yield, and throughput. In large measure, these gains have been driven by process optimization, which, in turn, have been enabled by control and reliability improvements due to this PV Manufacturing R&D program. This has resulted in substantial improvements of flexible CIGS PV module performance and efficiency.« less

Expertise Development With Different Types of Automation: A Function of Different Cognitive Abilities.

PubMed

Jipp, Meike

2016-02-01

I explored whether different cognitive abilities (information-processing ability, working-memory capacity) are needed for expertise development when different types of automation (information vs. decision automation) are employed. It is well documented that expertise development and the employment of automation lead to improved performance. Here, it is argued that a learner's ability to reason about an activity may be hindered by the employment of information automation. Additional feedback needs to be processed, thus increasing the load on working memory and decelerating expertise development. By contrast, the employment of decision automation may stimulate reasoning, increase the initial load on information-processing ability, and accelerate expertise development. Authors of past research have not investigated the interrelations between automation assistance, individual differences, and expertise development. Sixty-one naive learners controlled simulated air traffic with two types of automation: information automation and decision automation. Their performance was captured across 16 trials. Well-established tests were used to assess information-processing ability and working-memory capacity. As expected, learners' performance benefited from expertise development and decision automation. Furthermore, individual differences moderated the effect of the type of automation on expertise development: The employment of only information automation increased the load on working memory during later expertise development. The employment of decision automation initially increased the need to process information. These findings highlight the importance of considering individual differences and expertise development when investigating human-automation interaction. The results are relevant for selecting automation configurations for expertise development. © 2015, Human Factors and Ergonomics Society.

A resource for assessing information processing in the developing brain using EEG and eye tracking

PubMed Central

Langer, Nicolas; Ho, Erica J.; Alexander, Lindsay M.; Xu, Helen Y.; Jozanovic, Renee K.; Henin, Simon; Petroni, Agustin; Cohen, Samantha; Marcelle, Enitan T.; Parra, Lucas C.; Milham, Michael P.; Kelly, Simon P.

2017-01-01

We present a dataset combining electrophysiology and eye tracking intended as a resource for the investigation of information processing in the developing brain. The dataset includes high-density task-based and task-free EEG, eye tracking, and cognitive and behavioral data collected from 126 individuals (ages: 6–44). The task battery spans both the simple/complex and passive/active dimensions to cover a range of approaches prevalent in modern cognitive neuroscience. The active task paradigms facilitate principled deconstruction of core components of task performance in the developing brain, whereas the passive paradigms permit the examination of intrinsic functional network activity during varying amounts of external stimulation. Alongside these neurophysiological data, we include an abbreviated cognitive test battery and questionnaire-based measures of psychiatric functioning. We hope that this dataset will lead to the development of novel assays of neural processes fundamental to information processing, which can be used to index healthy brain development as well as detect pathologic processes. PMID:28398357

A Systematic Process for Developing High Quality SaaS Cloud Services

NASA Astrophysics Data System (ADS)

La, Hyun Jung; Kim, Soo Dong

Software-as-a-Service (SaaS) is a type of cloud service which provides software functionality through Internet. Its benefits are well received in academia and industry. To fully utilize the benefits, there should be effective methodologies to support the development of SaaS services which provide high reusability and applicability. Conventional approaches such as object-oriented methods do not effectively support SaaS-specific engineering activities such as modeling common features, variability, and designing quality services. In this paper, we present a systematic process for developing high quality SaaS and highlight the essentiality of commonality and variability (C&V) modeling to maximize the reusability. We first define criteria for designing the process model and provide a theoretical foundation for SaaS; its meta-model and C&V model. We clarify the notion of commonality and variability in SaaS, and propose a SaaS development process which is accompanied with engineering instructions. Using the proposed process, SaaS services with high quality can be effectively developed.

A resource for assessing information processing in the developing brain using EEG and eye tracking.

PubMed

Langer, Nicolas; Ho, Erica J; Alexander, Lindsay M; Xu, Helen Y; Jozanovic, Renee K; Henin, Simon; Petroni, Agustin; Cohen, Samantha; Marcelle, Enitan T; Parra, Lucas C; Milham, Michael P; Kelly, Simon P

2017-04-11

We present a dataset combining electrophysiology and eye tracking intended as a resource for the investigation of information processing in the developing brain. The dataset includes high-density task-based and task-free EEG, eye tracking, and cognitive and behavioral data collected from 126 individuals (ages: 6-44). The task battery spans both the simple/complex and passive/active dimensions to cover a range of approaches prevalent in modern cognitive neuroscience. The active task paradigms facilitate principled deconstruction of core components of task performance in the developing brain, whereas the passive paradigms permit the examination of intrinsic functional network activity during varying amounts of external stimulation. Alongside these neurophysiological data, we include an abbreviated cognitive test battery and questionnaire-based measures of psychiatric functioning. We hope that this dataset will lead to the development of novel assays of neural processes fundamental to information processing, which can be used to index healthy brain development as well as detect pathologic processes.

Making the PACS workstation a browser of image processing software: a feasibility study using inter-process communication techniques.

PubMed

Wang, Chunliang; Ritter, Felix; Smedby, Orjan

2010-07-01

To enhance the functional expandability of a picture archiving and communication systems (PACS) workstation and to facilitate the integration of third-part image-processing modules, we propose a browser-server style method. In the proposed solution, the PACS workstation shows the front-end user interface defined in an XML file while the image processing software is running in the background as a server. Inter-process communication (IPC) techniques allow an efficient exchange of image data, parameters, and user input between the PACS workstation and stand-alone image-processing software. Using a predefined communication protocol, the PACS workstation developer or image processing software developer does not need detailed information about the other system, but will still be able to achieve seamless integration between the two systems and the IPC procedure is totally transparent to the final user. A browser-server style solution was built between OsiriX (PACS workstation software) and MeVisLab (Image-Processing Software). Ten example image-processing modules were easily added to OsiriX by converting existing MeVisLab image processing networks. Image data transfer using shared memory added <10ms of processing time while the other IPC methods cost 1-5 s in our experiments. The browser-server style communication based on IPC techniques is an appealing method that allows PACS workstation developers and image processing software developers to cooperate while focusing on different interests.

Thermal Stir Welding Development at Marshall Space Flight Center

NASA Technical Reports Server (NTRS)

Ding, Robert J.

2008-01-01

Solid state welding processes have become the focus of welding process development at NASA's Marshall Space Flight Center. Unlike fusion weld processes such as tungsten inert gas (TIG), variable polarity plasma arc (VPPA), electron beam (EB), etc., solid state welding processes do not melt the material during welding. The resultant microstructure can be characterized as a dynamically recrystallized morphology much different than the casted, dentritic structure typical of fusion weld processes. The primary benefits of solid state processes over fusion weld processes include superior mechanic properties and the elimination of thermal distortion and residual stresses. These solid state processes attributes have profoundly influenced the direction of advanced welding research and development within the NASA agency. Thermal Stir Welding (TSW) is a new solid state welding process being developed at the Marshall Space Flight Center. Unlike friction stir welding, the heating, stirring and forging elements of the weld process can be decoupled for independent control. An induction coil induces energy into a workpiece to attain a desired plastic temperature. An independently controlled stir rod, captured within non-rotating containment plates, then stirs the plasticized material followed by forging plates/rollers that work the stirred weld joint. The independent control (decoupling) of heating, stirring and forging allows, theoretically, for the precision control of microstructure morphology. The TSW process is being used to evaluate the solid state joining of Haynes 230 for ARES J-2X applications. It is also being developed for 500-in (12.5 mm) thick commercially pure grade 2 titanium for navy applications. Other interests include Inconel 718 and stainless steel. This presentation will provide metallurgical and mechanical property data for these high melting temperature alloys.

Processability Theory and the Role of Morphology in English as a Second Language Development: A Longitudinal Study

ERIC Educational Resources Information Center

Dyson, Bronwen

2009-01-01

This article tests a prediction made by Processability Theory (Pienemann, 1998; 2005) that morphological acquisition is the driving force in English as a second language (ESL) development. It first outlines the model of psycholinguistic processing assumed by Processability Theory and shows how stages fall out from it. It then presents the…

Active vs. Passive Television Viewing: A Model of the Development of Television Information Processing by Children.

ERIC Educational Resources Information Center

Wright, John C.; And Others

A conceptual model of how children process televised information was developed with the goal of identifying those parameters of the process that are both measurable and manipulable in research settings. The model presented accommodates the nature of information processing both by the child and by the presentation by the medium. Presentation is…

HYPER-­TVT: Development and Implementation of an Interactive Learning Environment for Students of Chemical and Process Engineering

ERIC Educational Resources Information Center

Santoro, Marina; Mazzotti, Marco

2006-01-01

Hyper-TVT is a computer-aided education system that has been developed at the Institute of Process Engineering at the ETH Zurich. The aim was to create an interactive learning environment for chemical and process engineering students. The topics covered are the most important multistage separation processes, i.e. fundamentals of separation…

An interfaces approach to TES ground data system processing design with the Science Investigator-led Processing System (SIPS)

NASA Technical Reports Server (NTRS)

Kurian, R.; Grifin, A.

2002-01-01

Developing production-quality software to process the large volumes of scientific data is the responsibility of the TES Ground Data System, which is being developed at the Jet Propulsion Laboratory together with support contractor Raytheon/ITSS. The large data volume and processing requirements of the TES pose significant challenges to the design.

WISE: Automated support for software project management and measurement. M.S. Thesis

NASA Technical Reports Server (NTRS)

Ramakrishnan, Sudhakar

1995-01-01

One important aspect of software development and IV&V is measurement. Unless a software development effort is measured in some way, it is difficult to judge the effectiveness of current efforts and predict future performances. Collection of metrics and adherence to a process are difficult tasks in a software project. Change activity is a powerful indicator of project status. Automated systems that can handle change requests, issues, and other process documents provide an excellent platform for tracking the status of the project. A World Wide Web based architecture is developed for (a) making metrics collection an implicit part of the software process, (b) providing metric analysis dynamically, (c) supporting automated tools that can complement current practices of in-process improvement, and (d) overcoming geographical barrier. An operational system (WISE) instantiates this architecture allowing for the improvement of software process in a realistic environment. The tool tracks issues in software development process, provides informal communication between the users with different roles, supports to-do lists (TDL), and helps in software process improvement. WISE minimizes the time devoted to metrics collection, analysis, and captures software change data. Automated tools like WISE focus on understanding and managing the software process. The goal is improvement through measurement.

Isolation and Purification of Biotechnological Products

NASA Astrophysics Data System (ADS)

Hubbuch, Jürgen; Kula, Maria-Regina

2007-05-01

The production of modern pharma proteins is one of the most rapid growing fields in biotechnology. The overall development and production is a complex task ranging from strain development and cultivation to the purification and formulation of the drug. Downstream processing, however, still accounts for the major part of production costs. This is mainly due to the high demands on purity and thus safety of the final product and results in processes with a sequence of typically more than 10 unit operations. Consequently, even if each process step would operate at near optimal yield, a very significant amount of product would be lost. The majority of unit operations applied in downstream processing have a long history in the field of chemical and process engineering; nevertheless, mathematical descriptions of the respective processes and the economical large-scale production of modern pharmaceutical products are hampered by the complexity of the biological feedstock, especially the high molecular weight and limited stability of proteins. In order to develop new operational steps as well as a successful overall process, it is thus a necessary prerequisite to develop a deeper understanding of the thermodynamics and physics behind the applied processes as well as the implications for the product.

Review of operations in the Virginia Department of Transportation's project development process.

DOT National Transportation Integrated Search

2007-01-01

The Virginia Department of Transportation's (VDOT's) project development process (PDP) directs how construction projects are developed. The purpose of this study was to evaluate the manner in which operations is currently considered throughout the PD...

77 FR 66638 - The Standard on Process Safety Management of Highly Hazardous Chemicals; Extension of the Office...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-06

... analyses and the development of other elements of the standard; developing a written action plan for..., revalidating and retaining the process hazard analysis; developing and implementing written operating [[Page 66639

High flow rate development: process optimization using megasonic immersion development (MID)

NASA Astrophysics Data System (ADS)

Courboin, Daniel; Choi, Jong Woo; Jung, Sang Hyun; Baek, Seung Hee; Kim, Lee Ju

2004-12-01

In previous study the high impact of development by-products on Critical Dimension (CD) through the microloading effect has been demonstrated for a Novolak resist. In this paper, through further tests involving Chemically Amplified Resist (CAR) and Novolak resist, the microloading effect of development is characterized and tentative mechanism is presented. Megasonic Immersion Development (MID), a high flow rate development technique similar to the Proximity Gap Suction Development (PGSD), was used and compared with spin spray development and puddle development. On TOK IP3600, a Novolak resist, we have explored a wide range of process conditions with MID. Developer temperature was varied from 5°C to 40°C with TMAH developer concentration of 1.9% and 2.38% resulting in an isofocal dose range of 90mJ to 190mJ. Exposure Focus Matrix (EFM) with a specific microloading pattern and resist cross sections were performed. The best conditions are quite far from the standard process advised by the resist supplier. Very nice standing wave profile was obtained at high temperature development. On CAR, JEOL 9000MVII, a 50kV e-beam vector scan tool, and ETEC ALTA 4300, a DUV raster scan tool, were used with different develop process techniques including MID. FujiFilm Arch FEP-171 positive CAR and Sumitomo NEB-22 negative CAR were used on 50kV writing tool. Sumitomo PEK-130 was used on DUV writing tool. FEP-171 and PEK-1300 show microloading effect on high density patterns but not NEB-22. MID shows also improved reproduction of develop features in the chrome and a 20% improvement of CD uniformity. The results of this study seem to indicate that a closer look in their development process is needed for 90nm and 65nm technologies.

Development of NASA's Sample Cartridge Assembly: Summary of GEDS Design, Development Testing, and Thermal Analyses

NASA Technical Reports Server (NTRS)

O'Connor, Brian; Hernandez, Deborah; Hornsby, Linda; Brown, Maria; Horton-Mullins, Kathryn

2017-01-01

Outline: Background of ISS (International Space Station) Material Science Research Rack; NASA SCA (Sample Cartridge Assembly) Design; GEDS (Gravitational Effects in Distortion in Sintering) Experiment Ampoule Design; Development Testing Summary; Thermal Modeling and Analysis. Summary: GEDS design development challenging (GEDS Ampoule design developed through MUGS (Microgravity) testing; Short duration transient sample processing; Unable to measure sample temperatures); MUGS Development testing used to gather data (Actual LGF (Low Gradient Furnace)-like furnace response; Provided sample for sintering evaluation); Transient thermal model integral to successful GEDS experiment (Development testing provided furnace response; PI (Performance Indicator) evaluation of sintering anchored model evaluation of processing durations; Thermal transient model used to determine flight SCA sample processing profiles).

Development and Use of a Goal Setting/Attainment Process Designed To Measure a Teacher's Ability To Engage in Professional Growth and Leadership Initiatives.

ERIC Educational Resources Information Center

Minix, Nancy; And Others

The process used to evaluate progress in identifying the goals to be used in evaluating teacher performance under the Kentucky Career Ladder Program is described. The process pertains to two areas of teacher development: (1) professional growth and development, and (2) professional leadership and initiative. A total of 1,650 individuals were asked…

Analysis and Development of a Web-Enabled Planning and Scheduling Database Application

DTIC Science & Technology

2013-09-01

establishes an entity—relationship diagram for the desired process, constructs an operable database using MySQL , and provides a web- enabled interface for...development, develop, design, process, re- engineering, reengineering, MySQL , structured query language, SQL, myPHPadmin. 15. NUMBER OF PAGES 107 16...relationship diagram for the desired process, constructs an operable database using MySQL , and provides a web-enabled interface for the population of

NASA Procurement Career Development Program

NASA Technical Reports Server (NTRS)

1987-01-01

The NASA Procurement Career Development Program establishes an agency-wide framework for the management of career development activity in the procurement field. Within this framework, installations are encouraged to modify the various components to meet installation-specific mission and organization requirements. This program provides a systematic process for the assessment of and planning for the development, training, and education required to increase the employees' competence in the procurement work functions. It includes the agency-wide basic knowledge and skills by career field and level upon which individual and organizational development plans are developed. Also, it provides a system that is compatible with other human resource management and development systems, processes, and activities. The compatibility and linkage are important in fostering the dual responsibility of the individual and the organization in the career development process.

Assessment of MSFCs Process for the Development and Activation of Space Act Agreements

NASA Technical Reports Server (NTRS)

Daugherty, Rachel A.

2014-01-01

A Space Act Agreement (SAA) is a contractual vehicle that NASA utilizes to form partnerships with non-NASA entities to stimulate cutting-edge innovation within the science and technology communities while concurrently supporting the NASA missions. SAAs are similar to traditional contracts in that they involve the commitment of Agency resources but allow more flexibility and are more cost effective to implement than traditional contracts. Consequently, the use of SAAs to develop partnerships has greatly increased over the past several years. To facilitate this influx of SAAs, Marshall Space Flight Center (MSFC) developed a process during a kaizen event to streamline and improve the quality of SAAs developed at the Center level. This study assessed the current SAA process to determine if improvements could be implemented to increase productivity, decrease time to activation, and improve the quality of deliverables. Using a combination of direct procedural observation, personnel interviews, and statistical analysis, elements of the process in need of remediation were identified and potential solutions developed. The findings focus primarily on the difficulties surrounding tracking and enforcing process adherence and communication issues among stakeholders. Potential solutions include utilizing customer relationship management (CRM) software to facilitate process coordination and co-locating or potentially merging the two separate organizations involved in SAA development and activation at MSFC.

Concise Review: Process Development Considerations for Cell Therapy

PubMed Central

Brieva, Thomas; Raviv, Lior; Rowley, Jon; Niss, Knut; Brandwein, Harvey; Oh, Steve; Karnieli, Ohad

2015-01-01

The development of robust and well-characterized methods of production of cell therapies has become increasingly important as therapies advance through clinical trials toward approval. A successful cell therapy will be a consistent, safe, and effective cell product, regardless of the cell type or application. Process development strategies can be developed to gain efficiency while maintaining or improving safety and quality profiles. This review presents an introduction to the process development challenges of cell therapies and describes some of the tools available to address production issues. This article will provide a summary of what should be considered to efficiently advance a cellular therapy from the research stage through clinical trials and finally toward commercialization. The identification of the basic questions that affect process development is summarized in the target product profile, and considerations for process optimization are discussed. The goal is to identify potential manufacturing concerns early in the process so they may be addressed effectively and thus increase the probability that a therapy will be successful. Significance The present study contributes to the field of cell therapy by providing a resource for those transitioning a potential therapy from the research stage to clinical and commercial applications. It provides the necessary steps that, when followed, can result in successful therapies from both a clinical and commercial perspective. PMID:26315572

[Development of guidance for the approval process of brand-new medical products and regenerative medicine products].

PubMed

Niimi, Shingo

2015-01-01

Ministry of Health, Labour and Weltare has been conducting development of guidance for the approval process of brand-new medical products/development of guidance for medical devices in collaboration with Ministry of Economy, Trade and Industry as part of measures to promote practical use of brand-new medical products since 2005. The objective of this project is to expedite the processes from developmental process of medical devices to approval review and to introduce the medical devices to medical front quickly.. Ministry of Health, Labour and Welfare side has been making guidance for the guide in approval process of brand-new medical products and regeneration medicine products to aim at acceleration and facilitation of development and approval process of innovative medical products. Twenty-two of the guidance have been issued as director of the evaluation and licensing division. The evaluation index about safety and efficacy required for medical devices and regenerative medicine products in progress were put together in these guidance and useful for medical devices developer to understand the point at the approved review. Therefore, I think that the evaluation index could also contribute to the efficient product development. The guidance about implantable artificial heart is issued as the representative example which was useful in the approved review.

EXTRAPOLATION FROM IN VITRO MECHANISMS TO IN VIVO EFFECTS FOR DEVELOPMENTAL NEUROTOXICOLOGY.

EPA Science Inventory

Processes that are critical to development of the nervous system can be altered by both genetic and epigenetic factors. Developmental exposure to neurotoxicants can alter these processes and lead to perturbation of normal neural development. As numerous processes occur in tande...

Using Automatic Code Generation in the Attitude Control Flight Software Engineering Process

NASA Technical Reports Server (NTRS)

McComas, David; O'Donnell, James R., Jr.; Andrews, Stephen F.

1999-01-01

This paper presents an overview of the attitude control subsystem flight software development process, identifies how the process has changed due to automatic code generation, analyzes each software development phase in detail, and concludes with a summary of our lessons learned.

The Automation of Reserve Processing.

ERIC Educational Resources Information Center

Self, James

1985-01-01

Describes an automated reserve processing system developed locally at Clemons Library, University of Virginia. Discussion covers developments in the reserve operation at Clemons Library, automation of the processing and circulation functions of reserve collections, and changes in reserve operation performance and staffing needs due to automation.…

Soil Genesis and Development, Lesson 2 - Processes of Weathering

USDA-ARS?s Scientific Manuscript database

Weathering processes — which include physical, chemical, and biological — contribute to the development of soil. The learning objectives of the lesson are: 1) Define and distinguish physical, chemical, and biological weathering processes; and 2) Describe how rock and mineral properties and environm...

Flight Dynamics Mission Support and Quality Assurance Process

NASA Technical Reports Server (NTRS)

Oh, InHwan

1996-01-01

This paper summarizes the method of the Computer Sciences Corporation Flight Dynamics Operation (FDO) quality assurance approach to support the National Aeronautics and Space Administration Goddard Space Flight Center Flight Dynamics Support Branch. Historically, a strong need has existed for developing systematic quality assurance using methods that account for the unique nature and environment of satellite Flight Dynamics mission support. Over the past few years FDO has developed and implemented proactive quality assurance processes applied to each of the six phases of the Flight Dynamics mission support life cycle: systems and operations concept, system requirements and specifications, software development support, operations planing and training, launch support, and on-orbit mission operations. Rather than performing quality assurance as a final step after work is completed, quality assurance has been built in as work progresses in the form of process assurance. Process assurance activities occur throughout the Flight Dynamics mission support life cycle. The FDO Product Assurance Office developed process checklists for prephase process reviews, mission team orientations, in-progress reviews, and end-of-phase audits. This paper will outline the evolving history of FDO quality assurance approaches, discuss the tailoring of Computer Science Corporations's process assurance cycle procedures, describe some of the quality assurance approaches that have been or are being developed, and present some of the successful results.

From Discovery to Production: Biotechnology of Marine Fungi for the Production of New Antibiotics

PubMed Central

Silber, Johanna; Kramer, Annemarie; Labes, Antje; Tasdemir, Deniz

2016-01-01

Filamentous fungi are well known for their capability of producing antibiotic natural products. Recent studies have demonstrated the potential of antimicrobials with vast chemodiversity from marine fungi. Development of such natural products into lead compounds requires sustainable supply. Marine biotechnology can significantly contribute to the production of new antibiotics at various levels of the process chain including discovery, production, downstream processing, and lead development. However, the number of biotechnological processes described for large-scale production from marine fungi is far from the sum of the newly-discovered natural antibiotics. Methods and technologies applied in marine fungal biotechnology largely derive from analogous terrestrial processes and rarely reflect the specific demands of the marine fungi. The current developments in metabolic engineering and marine microbiology are not yet transferred into processes, but offer numerous options for improvement of production processes and establishment of new process chains. This review summarises the current state in biotechnological production of marine fungal antibiotics and points out the enormous potential of biotechnology in all stages of the discovery-to-development pipeline. At the same time, the literature survey reveals that more biotechnology transfer and method developments are needed for a sustainable and innovative production of marine fungal antibiotics. PMID:27455283

The Development of a Design and Construction Process Protocol to Support the Home Modification Process Delivered by Occupational Therapists

PubMed Central

Ormerod, Marcus; Newton, Rita

2018-01-01

Modifying the home environments of older people as they age in place is a well-established health and social care intervention. Using design and construction methods to redress any imbalance caused by the ageing process or disability within the home environment, occupational therapists are seen as the experts in this field of practice. However, the process used by occupational therapists when modifying home environments has been criticised for being disorganised and not founded on theoretical principles and concepts underpinning the profession. To address this issue, research was conducted to develop a design and construction process protocol specifically for home modifications. A three-stage approach was taken for the analysis of qualitative data generated from an online survey, completed by 135 occupational therapists in the UK. Using both the existing occupational therapy intervention process model and the design and construction process protocol as the theoretical frameworks, a 4-phase, 9-subphase design and construction process protocol for home modifications was developed. Overall, the study is innovative in developing the first process protocol for home modifications, potentially providing occupational therapists with a systematic and effective approach to the design and delivery of home modification services for older and disabled people. PMID:29682348

The Development of a Design and Construction Process Protocol to Support the Home Modification Process Delivered by Occupational Therapists.

PubMed

Russell, Rachel; Ormerod, Marcus; Newton, Rita

2018-01-01

Modifying the home environments of older people as they age in place is a well-established health and social care intervention. Using design and construction methods to redress any imbalance caused by the ageing process or disability within the home environment, occupational therapists are seen as the experts in this field of practice. However, the process used by occupational therapists when modifying home environments has been criticised for being disorganised and not founded on theoretical principles and concepts underpinning the profession. To address this issue, research was conducted to develop a design and construction process protocol specifically for home modifications. A three-stage approach was taken for the analysis of qualitative data generated from an online survey, completed by 135 occupational therapists in the UK. Using both the existing occupational therapy intervention process model and the design and construction process protocol as the theoretical frameworks, a 4-phase, 9-subphase design and construction process protocol for home modifications was developed. Overall, the study is innovative in developing the first process protocol for home modifications, potentially providing occupational therapists with a systematic and effective approach to the design and delivery of home modification services for older and disabled people.

Electromagnetic mixed waste processing system for asbestos decontamination

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kasevich, R.S.; Vaux, W.; Ulerich, N.

The overall objective of this three-phase program is to develop an integrated process for treating asbestos-containing material that is contaminated with radioactive and hazardous constituents. The integrated process will attempt to minimize processing and disposal costs. The objectives of Phase 1 were to establish the technical feasibility of asbestos decomposition, inorganic radionuclide nd heavy metal removal, and organic volatilization. Phase 1 resulted in the successful bench-scale demonstration of the elements required to develop a mixed waste treatment process for asbestos-containing material (ACM) contaminated with radioactive metals, heavy metals, and organics. Using the Phase 1 data, a conceptual process was developed.more » The Phase 2 program, currently in progress, is developing an integrated system design for ACM waste processing. The Phase 3 program will target demonstration of the mixed waste processing system at a DOE facility. The electromagnetic mixed waste processing system employs patented technologies to convert DOE asbestos to a non-hazardous, radionuclide-free, stable waste. The dry, contaminated asbestos is initially heated with radiofrequency energy to remove organic volatiles. Second,the radionuclides are removed by solvent extraction coupled with ion exchange solution treatment. Third, the ABCOV method converts the asbestos to an amorphous silica suspension at low temperature (100{degrees}C). Finally the amorphous silica is solidified for disposal.« less

A comparison of multi-metal deposition processes utilising gold nanoparticles and an evaluation of their application to 'low yield' surfaces for finger mark development.

PubMed

Fairley, C; Bleay, S M; Sears, V G; NicDaeid, N

2012-04-10

This paper reports a comparison of the effectiveness and practicality of using different multi-metal deposition processes for finger mark development. The work investigates whether modifications can be made to improve the performance of the existing process published by Schnetz. Secondly, we compare the ability of different multi-metal deposition processes to develop finger marks on a range of surfaces with that of other currently used development processes. All published multi-metal deposition processes utilise an initial stage of colloidal gold deposition followed by enhancement of the marks with using a physical developer. All possible combinations of colloidal gold and physical developer stages were tested. The method proposed by Schnetz was shown to be the most effective process, however a modification which reduced the pH of the enhancement solution was revealed to provide the best combination of effectiveness and practicality. In trials comparing the modified formulation with vacuum metal deposition, superglue and powder suspensions on surfaces which typically give low finger mark yields (cling film, plasticised vinyl, leather and masking tape), the modified method produced significantly better results over existing processes for cling film and plasticised vinyl. The modified formulation was found to be ineffective on both masking tape and leather. It is recommended that further tests be carried out on the modified multi-metal deposition formulation to establish whether it could be introduced for operational work on cling film material in particular. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Computer-Controlled Cylindrical Polishing Process for Large X-Ray Mirror Mandrels

NASA Technical Reports Server (NTRS)

Khan, Gufran S.; Gubarev, Mikhail; Speegle, Chet; Ramsey, Brian

2010-01-01

We are developing high-energy grazing incidence shell optics for hard-x-ray telescopes. The resolution of a mirror shells depends on the quality of cylindrical mandrel from which they are being replicated. Mid-spatial-frequency axial figure error is a dominant contributor in the error budget of the mandrel. This paper presents our efforts to develop a deterministic cylindrical polishing process in order to keep the mid-spatial-frequency axial figure errors to a minimum. Simulation software is developed to model the residual surface figure errors of a mandrel due to the polishing process parameters and the tools used, as well as to compute the optical performance of the optics. The study carried out using the developed software was focused on establishing a relationship between the polishing process parameters and the mid-spatial-frequency error generation. The process parameters modeled are the speeds of the lap and the mandrel, the tool s influence function, the contour path (dwell) of the tools, their shape and the distribution of the tools on the polishing lap. Using the inputs from the mathematical model, a mandrel having conical approximated Wolter-1 geometry, has been polished on a newly developed computer-controlled cylindrical polishing machine. The preliminary results of a series of polishing experiments demonstrate a qualitative agreement with the developed model. We report our first experimental results and discuss plans for further improvements in the polishing process. The ability to simulate the polishing process is critical to optimize the polishing process, improve the mandrel quality and significantly reduce the cost of mandrel production

ISLE (Image and Signal Processing LISP Environment) reference manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sherwood, R.J.; Searfus, R.M.

1990-01-01

ISLE is a rapid prototyping system for performing image and signal processing. It is designed to meet the needs of a person doing development of image and signal processing algorithms in a research environment. The image and signal processing modules in ISLE form a very capable package in themselves. They also provide a rich environment for quickly and easily integrating user-written software modules into the package. ISLE is well suited to applications in which there is a need to develop a processing algorithm in an interactive manner. It is straightforward to develop the algorithms, load it into ISLE, apply themore » algorithm to an image or signal, display the results, then modify the algorithm and repeat the develop-load-apply-display cycle. ISLE consists of a collection of image and signal processing modules integrated into a cohesive package through a standard command interpreter. ISLE developer elected to concentrate their effort on developing image and signal processing software rather than developing a command interpreter. A COMMON LISP interpreter was selected for the command interpreter because it already has the features desired in a command interpreter, it supports dynamic loading of modules for customization purposes, it supports run-time parameter and argument type checking, it is very well documented, and it is a commercially supported product. This manual is intended to be a reference manual for the ISLE functions The functions are grouped into a number of categories and briefly discussed in the Function Summary chapter. The full descriptions of the functions and all their arguments are given in the Function Descriptions chapter. 6 refs.« less

Demand driven salt clean-up in a molten salt fast reactor - Defining a priority list.

PubMed

Merk, B; Litskevich, D; Gregg, R; Mount, A R

2018-01-01

The PUREX technology based on aqueous processes is currently the leading reprocessing technology in nuclear energy systems. It seems to be the most developed and established process for light water reactor fuel and the use of solid fuel. However, demand driven development of the nuclear system opens the way to liquid fuelled reactors, and disruptive technology development through the application of an integrated fuel cycle with a direct link to reactor operation. The possibilities of this new concept for innovative reprocessing technology development are analysed, the boundary conditions are discussed, and the economic as well as the neutron physical optimization parameters of the process are elucidated. Reactor physical knowledge of the influence of different elements on the neutron economy of the reactor is required. Using an innovative study approach, an element priority list for the salt clean-up is developed, which indicates that separation of Neodymium and Caesium is desirable, as they contribute almost 50% to the loss of criticality. Separating Zirconium and Samarium in addition from the fuel salt would remove nearly 80% of the loss of criticality due to fission products. The theoretical study is followed by a qualitative discussion of the different, demand driven optimization strategies which could satisfy the conflicting interests of sustainable reactor operation, efficient chemical processing for the salt clean-up, and the related economic as well as chemical engineering consequences. A new, innovative approach of balancing the throughput through salt processing based on a low number of separation process steps is developed. Next steps for the development of an economically viable salt clean-up process are identified.

Guideline group composition and group processes: article 3 in Integrating and coordinating efforts in COPD guideline development. An official ATS/ERS workshop report.

PubMed

Kunz, Regina; Fretheim, Atle; Cluzeau, Françoise; Wilt, Timothy J; Qaseem, Amir; Lelgemann, Monika; Kelson, Marcia; Guyatt, Gordon; Schünemann, Holger J

2012-12-01

Professional societies, like many other organizations around the world, have recognized the need to use more rigorous processes to ensure that health care recommendations are informed by the best available research evidence. This is the third of a series of 14 articles that were prepared to advise guideline developers in respiratory and other diseases on considerations for group compositions and group processes in guideline development, and how this can be effectively integrated in the context of respiratory disease guidelines on a national and international level. We updated a review of the literature addressing group composition and group process, focusing on the following questions: 1. How to compose a functioning and representative guideline group; Who should be included in a guideline panel?; How to select organizations, groups, and individuals; What expertise is needed?; Consultation with non-included groups. 2. How to assure a functioning group process; How to make the process constructive; Balancing participation and finding agreement; Administrative support; What constitutes sufficient resources? Our conclusions are based on available evidence from published literature, experience from guideline developers, and workshop discussions. Formal studies addressing optimal processes in developing guidelines are limited, and experience from guideline organizations supplement the formal studies. When resources are available, guideline development groups should aim for multidisciplinary groups, including patients. Prerequisites for a multidisciplinary group include: a strong chair experienced in group facilitation with broad acceptance in the group, training the group in guideline methodology, and professional technical support. Formal consensus developing methods have proved effective in reaching agreement on the final recommendations.

Organizational management practices for achieving software process improvement

NASA Technical Reports Server (NTRS)

Kandt, Ronald Kirk

2004-01-01

The crisis in developing software has been known for over thirty years. Problems that existed in developing software in the early days of computing still exist today. These problems include the delivery of low-quality products, actual development costs that exceed expected development costs, and actual development time that exceeds expected development time. Several solutions have been offered to overcome out inability to deliver high-quality software, on-time and within budget. One of these solutions involves software process improvement. However, such efforts often fail because of organizational management issues. This paper discusses business practices that organizations should follow to improve their chances of initiating and sustaining successful software process improvement efforts.

Low-Cost Rapid Usability Testing: Its Application in Both Product Development and System Implementation.

PubMed

Kushniruk, Andre; Borycki, Elizabeth

2017-01-01

In recent years there has been considerable discussion around the need for certification and regulation of healthcare information technology (IT). In particular, the usability of the products being developed needs to be evaluated. This has included the application of standards designed to ensure the process of system development is user-centered and takes usability into consideration while a product is being developed. In addition to this, in healthcare, organizations in the United States and Europe have also addressed the need and requirement for product certification. However, despite these efforts there are continued reports of unusable and unsafe implementations. In this paper we discuss the need to not only include (and require) usability testing in the one-time development process of health IT products (such as EHRs), but we also argue for the need to additionally develop specific usability standards and requirements for usability testing during the implementation of vendor products (i.e. post product development) in healthcare settings. It is further argued that health IT products that may have been certified regarding their development process will still require application of usability testing in the process of implementing them in real hospital settings in order to ensure usability and safety. This is needed in order to ensure that the final result of both product development and implementation processes take into account and apply the latest usability principles and methods.

The life cycles of six multi-center adaptive clinical trials focused on neurological emergencies developed for the Advancing Regulatory Science initiative of the National Institutes of Health and US Food and Drug Administration: Case studies from the Adaptive Designs Accelerating Promising Treatments Into Trials Project.

PubMed

Guetterman, Timothy C; Fetters, Michael D; Mawocha, Samkeliso; Legocki, Laurie J; Barsan, William G; Lewis, Roger J; Berry, Donald A; Meurer, William J

2017-01-01

Clinical trials are complicated, expensive, time-consuming, and frequently do not lead to discoveries that improve the health of patients with disease. Adaptive clinical trials have emerged as a methodology to provide more flexibility in design elements to better answer scientific questions regarding whether new treatments are efficacious. Limited observational data exist that describe the complex process of designing adaptive clinical trials. To address these issues, the Adaptive Designs Accelerating Promising Treatments Into Trials project developed six, tailored, flexible, adaptive, phase-III clinical trials for neurological emergencies, and investigators prospectively monitored and observed the processes. The objective of this work is to describe the adaptive design development process, the final design, and the current status of the adaptive trial designs that were developed. To observe and reflect upon the trial development process, we employed a rich, mixed methods evaluation that combined quantitative data from visual analog scale to assess attitudes about adaptive trials, along with in-depth qualitative data about the development process gathered from observations. The Adaptive Designs Accelerating Promising Treatments Into Trials team developed six adaptive clinical trial designs. Across the six designs, 53 attitude surveys were completed at baseline and after the trial planning process completed. Compared to baseline, the participants believed significantly more strongly that the adaptive designs would be accepted by National Institutes of Health review panels and non-researcher clinicians. In addition, after the trial planning process, the participants more strongly believed that the adaptive design would meet the scientific and medical goals of the studies. Introducing the adaptive design at early conceptualization proved critical to successful adoption and implementation of that trial. Involving key stakeholders from several scientific domains early in the process appears to be associated with improved attitudes towards adaptive designs over the life cycle of clinical trial development.

Development and Processing Improvement of Aerospace Aluminum Alloys

NASA Technical Reports Server (NTRS)

Lisagor, W. Barry; Bales, Thomas T.

2007-01-01

This final report, in multiple presentation format, describes a comprehensive multi-tasked contract study to improve the overall property response of selected aerospace alloys, explore further a newly-developed and registered alloy, and correlate the processing, metallurgical structure, and subsequent properties achieved with particular emphasis on the crystallographic orientation texture developed. Modifications to plate processing, specifically hot rolling practices, were evaluated for Al-Li alloys 2195 and 2297, for the recently registered Al-Cu-Ag alloy, 2139, and for the Al-Zn-Mg-Cu alloy, 7050. For all of the alloys evaluated, the processing modifications resulted in significant improvements in mechanical properties. Analyses also resulted in an enhanced understanding of the correlation of processing, crystallographic texture, and mechanical properties.

Software Design Methodology Migration for a Distributed Ground System

NASA Technical Reports Server (NTRS)

Ritter, George; McNair, Ann R. (Technical Monitor)

2002-01-01

The Marshall Space Flight Center's (MSFC) Payload Operations Center (POC) ground system has been developed and has evolved over a period of about 10 years. During this time the software processes have migrated from more traditional to more contemporary development processes. The new Software processes still emphasize requirements capture, software configuration management, design documenting, and making sure the products that have been developed are accountable to initial requirements. This paper will give an overview of how the Software Process have evolved highlighting the positives as well as the negatives. In addition, we will mention the COTS tools that have been integrated into the processes and how the COTS have provided value to the project .

DOE Office of Scientific and Technical Information (OSTI.GOV)

Clarke, Kester Diederik

The intent of this report is to document a procedure used at LANL for HIP bonding aluminum cladding to U-10Mo fuel foils using a formed HIP can for the Domestic Reactor Conversion program in the NNSA Office of Material, Management and Minimization, and provide some details that may not have been published elsewhere. The HIP process is based on the procedures that have been used to develop the formed HIP can process, including the baseline process developed at Idaho National Laboratory (INL). The HIP bonding cladding process development is summarized in the listed references. Further iterations with Babcock & Wilcoxmore » (B&W) to refine the process to meet production and facility requirements is expected.« less

Application of NASA-developed technology to the automatic control of municipal sewage treatment plants

NASA Technical Reports Server (NTRS)

Hiser, L. L.; Herrera, W. R.

1973-01-01

A search was made of NASA developed technology and commercial technology for process control sensors and instrumentation which would be applicable to the operation of municipal sewage treatment plants. Several notable items were found from which process control concepts were formulated that incorporated these items into systems to automatically operate municipal sewage treatment plants. A preliminary design of the most promising concept was developed into a process control scheme for an activated sludge treatment plant. This design included process control mechanisms for maintaining constant food to sludge mass (F/M) ratio, and for such unit processes as primary sedimentation, sludge wastage, and underflow control from the final clarifier.

An Extensible Information Grid for Risk Management

NASA Technical Reports Server (NTRS)

Maluf, David A.; Bell, David G.

2003-01-01

This paper describes recent work on developing an extensible information grid for risk management at NASA - a RISK INFORMATION GRID. This grid is being developed by integrating information grid technology with risk management processes for a variety of risk related applications. To date, RISK GRID applications are being developed for three main NASA processes: risk management - a closed-loop iterative process for explicit risk management, program/project management - a proactive process that includes risk management, and mishap management - a feedback loop for learning from historical risks that escaped other processes. This is enabled through an architecture involving an extensible database, structuring information with XML, schemaless mapping of XML, and secure server-mediated communication using standard protocols.

Biotechnology in Food Production and Processing

NASA Astrophysics Data System (ADS)

Knorr, Dietrich; Sinskey, Anthony J.

1985-09-01

The food processing industry is the oldest and largest industry using biotechnological processes. Further development of food products and processes based on biotechnology depends upon the improvement of existing processes, such as fermentation, immobilized biocatalyst technology, and production of additives and processing aids, as well as the development of new opportunities for food biotechnology. Improvements are needed in the characterization, safety, and quality control of food materials, in processing methods, in waste conversion and utilization processes, and in currently used food microorganism and tissue culture systems. Also needed are fundamental studies of the structure-function relationship of food materials and of the cell physiology and biochemistry of raw materials.

Intelligent process development of foam molding for the Thermal Protection System (TPS) of the space shuttle external tank

NASA Technical Reports Server (NTRS)

Bharwani, S. S.; Walls, J. T.; Jackson, M. E.

1987-01-01

A knowledge based system to assist process engineers in evaluating the processability and moldability of poly-isocyanurate (PIR) formulations for the thermal protection system of the Space Shuttle external tank (ET) is discussed. The Reaction Injection Molding- Process Development Advisor (RIM-PDA) is a coupled system which takes advantage of both symbolic and numeric processing techniques. This system will aid the process engineer in identifying a startup set of mold schedules and in refining the mold schedules to remedy specific process problems diagnosed by the system.

An approach to quantitative sustainability assessment in the early stages of process design.

PubMed

Tugnoli, Alessandro; Santarelli, Francesco; Cozzani, Valerio

2008-06-15

A procedure was developed for the quantitative assessment of key performance indicators suitable for the sustainability analysis of alternative processes, mainly addressing the early stages of process design. The methodology was based on the calculation of a set of normalized impact indices allowing a direct comparison of the additional burden of each process alternative on a selected reference area. Innovative reference criteria were developed to compare and aggregate the impact indicators on the basis of the site-specific impact burden and sustainability policy. An aggregation procedure also allows the calculation of overall sustainability performance indicators and of an "impact fingerprint" of each process alternative. The final aim of the method is to support the decision making process during process development, providing a straightforward assessment of the expected sustainability performances. The application of the methodology to case studies concerning alternative waste disposal processes allowed a preliminary screening of the expected critical sustainability impacts of each process. The methodology was shown to provide useful results to address sustainability issues in the early stages of process design.

Design, scale-up, Six Sigma in processing different feedstocks in a fixed bed downdraft biomass gasifier

NASA Astrophysics Data System (ADS)

Boravelli, Sai Chandra Teja

This thesis mainly focuses on design and process development of a downdraft biomass gasification processes. The objective is to develop a gasifier and process of gasification for a continuous steady state process. A lab scale downdraft gasifier was designed to develop the process and obtain optimum operating procedure. Sustainable and dependable sources such as biomass are potential sources of renewable energy and have a reasonable motivation to be used in developing a small scale energy production plant for countries such as Canada where wood stocks are more reliable sources than fossil fuels. This thesis addresses the process of thermal conversion of biomass gasification process in a downdraft reactor. Downdraft biomass gasifiers are relatively cheap and easy to operate because of their design. We constructed a simple biomass gasifier to study the steady state process for different sizes of the reactor. The experimental part of this investigation look at how operating conditions such as feed rate, air flow, the length of the bed, the vibration of the reactor, height and density of syngas flame in combustion flare changes for different sizes of the reactor. These experimental results also compare the trends of tar, char and syngas production for wood pellets in a steady state process. This study also includes biomass gasification process for different wood feedstocks. It compares how shape, size and moisture content of different feedstocks makes a difference in operating conditions for the gasification process. For this, Six Sigma DMAIC techniques were used to analyze and understand how each feedstock makes a significant impact on the process.

Recovery and purification process development for monoclonal antibody production

PubMed Central

Ma, Junfen; Winter, Charles; Bayer, Robert

2010-01-01

Hundreds of therapeutic monoclonal antibodies (mAbs) are currently in development, and many companies have multiple antibodies in their pipelines. Current methodology used in recovery processes for these molecules are reviewed here. Basic unit operations such as harvest, Protein A affinity chromatography and additional polishing steps are surveyed. Alternative processes such as flocculation, precipitation and membrane chromatography are discussed. We also cover platform approaches to purification methods development, use of high throughput screening methods, and offer a view on future developments in purification methodology as applied to mAbs. PMID:20647768

Vacuum vapor deposition: A spinoff of space welding development

NASA Technical Reports Server (NTRS)

Poorman, R. M.

1991-01-01

A vapor deposition process has been defined through a spinoff effort of space welding development. In this development for welding in a space environment, a hollow electrode was used to add gas precisely at the welding arc. This provides gas for ionization which carries the welding arc current. During this welding development metal vapor coatings were observed. These coatings are unique in that they are produced by a new process. Some coatings produced and the potential of this new and innovative vapor deposition process are characterized. Advantages over prior art are discussed.

Development of automation software for neutron activation analysis process in Malaysian nuclear agency

NASA Astrophysics Data System (ADS)

Yussup, N.; Rahman, N. A. A.; Ibrahim, M. M.; Mokhtar, M.; Salim, N. A. A.; Soh@Shaari, S. C.; Azman, A.

2017-01-01

Neutron Activation Analysis (NAA) process has been established in Malaysian Nuclear Agency (Nuclear Malaysia) since 1980s. Most of the procedures established especially from sample registration to sample analysis are performed manually. These manual procedures carried out by the NAA laboratory personnel are time consuming and inefficient. Hence, a software to support the system automation is developed to provide an effective method to replace redundant manual data entries and produce faster sample analysis and calculation process. This paper describes the design and development of automation software for NAA process which consists of three sub-programs. The sub-programs are sample registration, hardware control and data acquisition; and sample analysis. The data flow and connection between the sub-programs will be explained. The software is developed by using National Instrument LabView development package.

A social information processing approach to job attitudes and task design.

PubMed

Salancik, G R; Pfeffer, J

1978-06-01

This article outlines a social information processing approach to explain job attitudes. In comparison with need-satisfaction and expectancy models to job attitudes and motivation, the social information processing perspective emphasizes the effects of context and the consequences of past choices, rather than individual predispositions and rational decision-making processes. When an individual develops statements about attitude or needs, he or she uses social information--information about past behavior and about what others think. The process of attributing attitudes or needs from behavior is itself affected by commitment processes, by the saliency and relevance of information, and by the need to develop socially acceptable and legitimate rationalizations for actions. Both attitudes and need statements, as well as characterizations of jobs, are affected by informational social influence. The implications of the social information processing perspective for organization development efforts and programs of job redesign are discussed.

Interactive information processing for NASA's mesoscale analysis and space sensor program

NASA Technical Reports Server (NTRS)

Parker, K. G.; Maclean, L.; Reavis, N.; Wilson, G.; Hickey, J. S.; Dickerson, M.; Karitani, S.; Keller, D.

1985-01-01

The Atmospheric Sciences Division (ASD) of the Systems Dynamics Laboratory at NASA's Marshall Space Flight Center (MSFC) is currently involved in interactive information processing for the Mesoscale Analysis and Space Sensor (MASS) program. Specifically, the ASD is engaged in the development and implementation of new space-borne remote sensing technology to observe and measure mesoscale atmospheric processes. These space measurements and conventional observational data are being processed together to gain an improved understanding of the mesoscale structure and the dynamical evolution of the atmosphere relative to cloud development and precipitation processes. To satisfy its vast data processing requirements, the ASD has developed a Researcher Computer System consiting of three primary computer systems which provides over 20 scientists with a wide range of capabilities for processing and displaying a large volumes of remote sensing data. Each of the computers performs a specific function according to its unique capabilities.

Developing Mathematical Processes (DMP). Field Test Evaluation, 1973-1974.

ERIC Educational Resources Information Center

Schall, William; And Others

The Developing Mathematical Processes (DMP) program was field-tested in the kindergarten and first three grades of one parochial and five public schools. DMP is an activity-based program developed around a comprehensive list of behavioral objectives. The program is concerned with the development of intuitive geometric concepts as well as…

Validating a Measure of Stages of Change in Career Development

ERIC Educational Resources Information Center

Hammond, Marie S.; Michael, Tony; Luke, Charles

2017-01-01

Research on the processes of change in career development has focused on developmental stages rather than processes. This manuscript reports on the development and validation of the stages of change-career development scale, adapted from McConnaughy, Prochaska, & Velicer (1983) measure of stages of change in psychotherapy. Data from 875…

A Neuroconstructivist Model of Past Tense Development and Processing

ERIC Educational Resources Information Center

Westermann, Gert; Ruh, Nicolas

2012-01-01

We present a neural network model of learning and processing the English past tense that is based on the notion that experience-dependent cortical development is a core aspect of cognitive development. During learning the model adds and removes units and connections to develop a task-specific final architecture. The model provides an integrated…

Developing Automated Feedback Materials for a Training Simulator: An Interaction between Users and Researchers.

ERIC Educational Resources Information Center

Shlechter, Theodore M.; And Others

This paper focuses upon the research and development (R&D) process associated with developing automated feedback materials for the SIMulation NETworking (SIMNET) training system. This R&D process involved a partnership among instructional developers, practitioners, and researchers. Users' input has been utilized to help: (1) design the…

A Conceptual Model for Developing Mindsets for Strategic Insight under Conditions of Complexity and High Uncertainty

ERIC Educational Resources Information Center

Yorks, Lyle; Nicolaides, Aliki

2012-01-01

This article addresses an important, yet often underattended to, aspect of the strategy development process: fostering the use of strategic learning practices in the simultaneous practice of developing strategy and cultivating strategic mindset awareness. The need for addressing this aspect of the strategy development process is increasingly…

Annotation: Development of Facial Expression Recognition from Childhood to Adolescence--Behavioural and Neurological Perspectives

ERIC Educational Resources Information Center

Herba, Catherine; Phillips, Mary

2004-01-01

Background: Intact emotion processing is critical for normal emotional development. Recent advances in neuroimaging have facilitated the examination of brain development, and have allowed for the exploration of the relationships between the development of emotion processing abilities, and that of associated neural systems. Methods: A literature…

Development and History of the Concept of PPB.

ERIC Educational Resources Information Center

Keller, Harry

Program budgeting is an extension and refinement of budgeting processes developed during the last half century. The purpose of this paper is to investigate the theory, philosophy, and techniques of this new process, and to develop a conceptual framework for its use. An account of the historical development of Planning Programming Budgeting Systems…

The Family's Influence on Adolescent and Young Adult Career Development: Theory, Research and Practice.

ERIC Educational Resources Information Center

Hughes, Cathy; Thomas, Trang

2003-01-01

A research review identified a range of family process variables associated with enhanced career development for adolescents and young adults. Findings were consistent with the theories of Roe (personality development and career choice) and Super (life-span, life-space) regarding the influence of family processes on career development. (Contains…

The Investigation of Teachers' Metaphoric Perceptions about Professional Development

ERIC Educational Resources Information Center

Yurtseven, Nihal

2017-01-01

Professional development is an ongoing process in which teachers review their teaching practices and learn how to respond to their students' needs. To make the professional development process more effective, we need to define the identity of a teacher correctly and clarify the perspective about teachers' professional development. The purpose of…

OD: A Theory and Process for Influencing Human and Organization Development.

ERIC Educational Resources Information Center

Kurpius, DeWayne J.

1979-01-01

Offers a conceptual framework for organizational development consultation, through a brief definition of the process, with attention given to the systems approach. The consultation process is described, and a brief statement about consulting in business and higher education settings is included. (Author/JEG)

Process Acceptance and Adoption by IT Software Project Practitioners

ERIC Educational Resources Information Center

Guardado, Deana R.

2012-01-01

This study addresses the question of what factors determine acceptance and adoption of processes in the context of Information Technology (IT) software development projects. This specific context was selected because processes required for managing software development projects are less prescriptive than in other, more straightforward, IT…

A Reverse Osmosis System for an Advanced Separation Process Laboratory.

ERIC Educational Resources Information Center

Slater, C. S.; Paccione, J. D.

1987-01-01

Focuses on the development of a pilot unit for use in an advanced separations process laboratory in an effort to develop experiments on such processes as reverse osmosis, ultrafiltration, adsorption, and chromatography. Discusses reverse osmosis principles, the experimental system design, and some experimental studies. (TW)

Validation of a pulsed electric field process to pasteurize strawberry puree

USDA-ARS?s Scientific Manuscript database

An inexpensive data acquisition method was developed to validate the exact number and shape of the pulses applied during pulsed electric fields (PEF) processing. The novel validation method was evaluated in conjunction with developing a pasteurization PEF process for strawberry puree. Both buffered...

77 FR 38597 - Multistakeholder Process To Develop Consumer Data Privacy Code of Conduct Concerning Mobile...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-28

... Process To Develop Consumer Data Privacy Code of Conduct Concerning Mobile Application Transparency AGENCY... convene the first meeting of a privacy multistakeholder process concerning mobile application transparency... concerning mobile application transparency. Stakeholders will engage in an open, transparent, consensus...

Preliminary guidelines and recommendations for the development of material and process specifications for carbon fiber-reinforced liquid resin molded materials.

DOT National Transportation Integrated Search

2007-05-01

This document recommends guidance and criteria for the development of material and process specifications and material acceptance documents for liquid resins and continuous carbon fiber reinforcement materials used in liquid molding processes to manu...

Graphic Design in Libraries: A Conceptual Process

ERIC Educational Resources Information Center

Ruiz, Miguel

2014-01-01

Providing successful library services requires efficient and effective communication with users; therefore, it is important that content creators who develop visual materials understand key components of design and, specifically, develop a holistic graphic design process. Graphic design, as a form of visual communication, is the process of…

End users transforming experiences into formal information and process models for personalised health interventions.

PubMed

Lindgren, Helena; Lundin-Olsson, Lillemor; Pohl, Petra; Sandlund, Marlene

2014-01-01

Five physiotherapists organised a user-centric design process of a knowledge-based support system for promoting exercise and preventing falls. The process integrated focus group studies with 17 older adults and prototyping. The transformation of informal medical and rehabilitation expertise and older adults' experiences into formal information and process models during the development was studied. As tool they used ACKTUS, a development platform for knowledge-based applications. The process became agile and incremental, partly due to the diversity of expectations and preferences among both older adults and physiotherapists, and the participatory approach to design and development. In addition, there was a need to develop the knowledge content alongside with the formal models and their presentations, which allowed the participants to test hands-on and evaluate the ideas, content and design. The resulting application is modular, extendable, flexible and adaptable to the individual end user. Moreover, the physiotherapists are able to modify the information and process models, and in this way further develop the application. The main constraint was found to be the lack of support for the initial phase of concept modelling, which lead to a redesigned user interface and functionality of ACKTUS.

Semiautomated Sample Preparation for Protein Stability and Formulation Screening via Buffer Exchange.

PubMed

Ying, William; Levons, Jaquan K; Carney, Andrea; Gandhi, Rajesh; Vydra, Vicky; Rubin, A Erik

2016-06-01

A novel semiautomated buffer exchange process workflow was developed to enable efficient early protein formulation screening. An antibody fragment protein, BMSdab, was used to demonstrate the workflow. The process afforded 60% to 80% cycle time and scientist time savings and significant material efficiencies. These efficiencies ultimately facilitated execution of this stability work earlier in the drug development process, allowing this tool to inform the developability of potential candidates for development from a formulation perspective. To overcome the key technical challenges, the protein solution was buffer-exchanged by centrifuge filtration into formulations for stability screening in a 96-well plate with an ultrafiltration membrane, leveraging automated liquid handling and acoustic volume measurements to allow several cycles of exchanges. The formulations were transferred into a vacuum manifold and sterile filtered into a rack holding 96 glass vials. The vials were sealed with a capmat of individual caps and placed in stability stations. Stability of the samples prepared by this process and by the standard process was demonstrated to be comparable. This process enabled screening a number of formulations of a protein at an early pharmaceutical development stage with a short sample preparation time. © 2015 Society for Laboratory Automation and Screening.

From the past to the future: Integrating work experience into the design process.

PubMed

Bittencourt, João Marcos; Duarte, Francisco; Béguin, Pascal

2017-01-01

Integrating work activity issues into design process is a broadly discussed theme in ergonomics. Participation is presented as the main means for such integration. However, a late participation can limit the development of both project solutions and future work activity. This article presents the concept of construction of experience aiming at the articulated development of future activities and project solutions. It is a non-teleological approach where the initial concepts will be transformed by the experience built up throughout the design process. The method applied was a case study of an ergonomic participation during the design of a new laboratory complex for biotechnology research. Data was obtained through analysis of records in a simulation process using a Lego scale model and interviews with project participants. The simulation process allowed for developing new ways of working and generating changes in the initial design solutions, which enable workers to adopt their own developed strategies for conducting work more safely and efficiently in the future work system. Each project decision either opens or closes a window of opportunities for developing a future activity. Construction of experience in a non-teleological design process allows for understanding the consequences of project solutions for future work.

Architecture for Survivable System Processing (ASSP)

NASA Astrophysics Data System (ADS)

Wood, Richard J.

1991-11-01

The Architecture for Survivable System Processing (ASSP) Program is a multi-phase effort to implement Department of Defense (DOD) and commercially developed high-tech hardware, software, and architectures for reliable space avionics and ground based systems. System configuration options provide processing capabilities to address Time Dependent Processing (TDP), Object Dependent Processing (ODP), and Mission Dependent Processing (MDP) requirements through Open System Architecture (OSA) alternatives that allow for the enhancement, incorporation, and capitalization of a broad range of development assets. High technology developments in hardware, software, and networking models, address technology challenges of long processor life times, fault tolerance, reliability, throughput, memories, radiation hardening, size, weight, power (SWAP) and security. Hardware and software design, development, and implementation focus on the interconnectivity/interoperability of an open system architecture and is being developed to apply new technology into practical OSA components. To insure for widely acceptable architecture capable of interfacing with various commercial and military components, this program provides for regular interactions with standardization working groups (e.g.) the International Standards Organization (ISO), American National Standards Institute (ANSI), Society of Automotive Engineers (SAE), and Institute of Electrical and Electronic Engineers (IEEE). Selection of a viable open architecture is based on the widely accepted standards that implement the ISO/OSI Reference Model.

Architecture for Survivable System Processing (ASSP)

NASA Technical Reports Server (NTRS)

Wood, Richard J.

1991-01-01

The Architecture for Survivable System Processing (ASSP) Program is a multi-phase effort to implement Department of Defense (DOD) and commercially developed high-tech hardware, software, and architectures for reliable space avionics and ground based systems. System configuration options provide processing capabilities to address Time Dependent Processing (TDP), Object Dependent Processing (ODP), and Mission Dependent Processing (MDP) requirements through Open System Architecture (OSA) alternatives that allow for the enhancement, incorporation, and capitalization of a broad range of development assets. High technology developments in hardware, software, and networking models, address technology challenges of long processor life times, fault tolerance, reliability, throughput, memories, radiation hardening, size, weight, power (SWAP) and security. Hardware and software design, development, and implementation focus on the interconnectivity/interoperability of an open system architecture and is being developed to apply new technology into practical OSA components. To insure for widely acceptable architecture capable of interfacing with various commercial and military components, this program provides for regular interactions with standardization working groups (e.g.) the International Standards Organization (ISO), American National Standards Institute (ANSI), Society of Automotive Engineers (SAE), and Institute of Electrical and Electronic Engineers (IEEE). Selection of a viable open architecture is based on the widely accepted standards that implement the ISO/OSI Reference Model.

Intelligent systems/software engineering methodology - A process to manage cost and risk

NASA Technical Reports Server (NTRS)

Friedlander, Carl; Lehrer, Nancy

1991-01-01

A systems development methodology is discussed that has been successfully applied to the construction of a number of intelligent systems. This methodology is a refinement of both evolutionary and spiral development methodologies. It is appropriate for development of intelligent systems. The application of advanced engineering methodology to the development of software products and intelligent systems is an important step toward supporting the transition of AI technology into aerospace applications. A description of the methodology and the process model from which it derives is given. Associated documents and tools are described which are used to manage the development process and record and report the emerging design.

Friction Stir Welding Development at National Aeronautics and Space Administration-Marshall Space Flight Center

NASA Technical Reports Server (NTRS)

Bhat, Biliyar N.; Carter, Robert W.; Ding, Robert J.; Lawless, Kirby G.; Nunes, Arthur C., Jr.; Russell, Carolyn K.; Shah, Sandeep R.; Munafo, Paul M. (Technical Monitor)

2001-01-01

This paper presents an over-view of friction stir welding (FSW) process development and applications at Marshall Space Flight Center (MSFC). FSW process development started as a laboratory curiosity but soon found support from many users. The FSW process advanced very quickly and has found many applications both within and outside the aerospace industry. It is currently being adapted for joining key elements of the Space Shuttle External Tank for improved producibility and reliability. FSW process modeling is done to better understand and improve the process. Special tools have been developed to weld variable thickness materials including very thin and very thick materials. FSW is now being applied to higher temperature materials such as copper and to advanced materials such as metal matrix composites. FSW technology is being successfully transferred from MSFC laboratory to shop floors of many commercial companies.

Automatic sample changer control software for automation of neutron activation analysis process in Malaysian Nuclear Agency

NASA Astrophysics Data System (ADS)

Yussup, N.; Ibrahim, M. M.; Rahman, N. A. A.; Mokhtar, M.; Salim, N. A. A.; Soh@Shaari, S. C.; Azman, A.; Lombigit, L.; Azman, A.; Omar, S. A.

2018-01-01

Most of the procedures in neutron activation analysis (NAA) process that has been established in Malaysian Nuclear Agency (Nuclear Malaysia) since 1980s were performed manually. These manual procedures carried out by the NAA laboratory personnel are time consuming and inefficient especially for sample counting and measurement process. The sample needs to be changed and the measurement software needs to be setup for every one hour counting time. Both of these procedures are performed manually for every sample. Hence, an automatic sample changer system (ASC) that consists of hardware and software is developed to automate sample counting process for up to 30 samples consecutively. This paper describes the ASC control software for NAA process which is designed and developed to control the ASC hardware and call GammaVision software for sample measurement. The software is developed by using National Instrument LabVIEW development package.

Development of a case tool to support decision based software development

NASA Technical Reports Server (NTRS)

Wild, Christian J.

1993-01-01

A summary of the accomplishments of the research over the past year are presented. Achievements include: made demonstrations with DHC, a prototype supporting decision based software development (DBSD) methodology, for Paramax personnel at ODU; met with Paramax personnel to discuss DBSD issues, the process of integrating DBSD and Refinery and the porting process model; completed and submitted a paper describing DBSD paradigm to IFIP '92; completed and presented a paper describing the approach for software reuse at the Software Reuse Workshop in April 1993; continued to extend DHC with a project agenda, facility necessary for a better project management; completed a primary draft of the re-engineering process model for porting; created a logging form to trace all the activities involved in the process of solving the reengineering problem, and developed a primary chart with the problems involved by the reengineering process.

Reengineering the Project Design Process

NASA Technical Reports Server (NTRS)

Casani, E.; Metzger, R.

1994-01-01

In response to NASA's goal of working faster, better and cheaper, JPL has developed extensive plans to minimize cost, maximize customer and employee satisfaction, and implement small- and moderate-size missions. These plans include improved management structures and processes, enhanced technical design processes, the incorporation of new technology, and the development of more economical space- and ground-system designs. The Laboratory's new Flight Projects Implementation Office has been chartered to oversee these innovations and the reengineering of JPL's project design process, including establishment of the Project Design Center and the Flight System Testbed. Reengineering at JPL implies a cultural change whereby the character of its design process will change from sequential to concurrent and from hierarchical to parallel. The Project Design Center will support missions offering high science return, design to cost, demonstrations of new technology, and rapid development. Its computer-supported environment will foster high-fidelity project life-cycle development and cost estimating.

Drawing links between the autism cognitive profile and imagination: Executive function and processing bias in imaginative drawings by children with and without autism.

PubMed

Ten Eycke, Kayla D; Müller, Ulrich

2018-02-01

Little is known about the relation between cognitive processes and imagination and whether this relation differs between neurotypically developing children and children with autism. To address this issue, we administered a cognitive task battery and Karmiloff-Smith's drawing task, which requires children to draw imaginative people and houses. For children with autism, executive function significantly predicted imaginative drawing. In neurotypically developing controls, executive function and cognitive-perceptual processing style predicted imaginative drawing, but these associations were moderated by mental age. In younger (neurotypically developing) children, better executive function and a local processing bias were associated with imagination; in older children, only a global bias was associated with imagination. These findings suggest that (a) with development there are changes in the type of cognitive processes involved in imagination and (b) children with autism employ a unique cognitive strategy in imaginative drawing.

Development of vapor phase hydrogen peroxide sterilization process for spacecraft applications

NASA Technical Reports Server (NTRS)

Rohatgi, N.; Schubert, W.; Knight, J.; Quigley, M.; Forsberg, G.; Ganapathi, G.; Yarbrough, C.; Koukol, R.

2001-01-01

This paper will present test data and discussion on the work we are conducting at JPL to address the following issues: 1) efficacy of sterilization process; 2) diffusion of hydrogen peroxide under sterilization process conditions into hard to reach places; 3) materials and components compatibility with the sterilization process and 4) development of methodology to protect sensitive components from hydrogen peroxide vapor.

Knowledge Representation Artifacts for Use in Sensemaking Support Systems

DTIC Science & Technology

2015-03-12

and manual processing must be replaced by automated processing wherever it makes sense and is possible. Clearly, given the data and cognitive...knowledge-centric view to situation analysis and decision-making as previously discussed, has lead to the development of several automated processing components...for use in sensemaking support systems [6-11]. In turn, automated processing has required the development of appropriate knowledge

Pahoa geothermal industrial park. Engineering and economic analysis for direct applications of geothermal energy in an industrial park at Pahoa, Hawaii

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moreau, J.W.

1980-12-01

This engineering and economic study evaluated the potential for developing a geothermal industrial park in the Puna District near Pahoa on the Island of Hawaii. Direct heat industrial applications were analyzed from a marketing, engineering, economic, environmental, and sociological standpoint to determine the most viable industries for the park. An extensive literature search produced 31 existing processes currently using geothermal heat. An additional list was compiled indicating industrial processes that require heat that could be provided by geothermal energy. From this information, 17 possible processes were selected for consideration. Careful scrutiny and analysis of these 17 processes revealed three thatmore » justified detailed economic workups. The three processes chosen for detailed analysis were: an ethanol plant using bagasse and wood as feedstock; a cattle feed mill using sugar cane leaf trash as feedstock; and a papaya processing facility providing both fresh and processed fruit. In addition, a research facility to assess and develop other processes was treated as a concept. Consideration was given to the impediments to development, the engineering process requirements and the governmental support for each process. The study describes the geothermal well site chosen, the pipeline to transmit the hydrothermal fluid, and the infrastructure required for the industrial park. A conceptual development plan for the ethanol plant, the feedmill and the papaya processing facility was prepared. The study concluded that a direct heat industrial park in Pahoa, Hawaii, involves considerable risks.« less

Development and technical implementation of the separation nozzle process for enrichment of uranium-235

DOE Office of Scientific and Technical Information (OSTI.GOV)

Becker, E.W.; Bier, W.; Bley, P.

In the separation nozzle process, enrichment is achieved by extremely high centrifugal forces in a curved flow of UF/sub 6/ diluted by a light gas. The first commercial application is in Brasil, where a so-called First Cascade consisting of 24 separation nozzle stages is under construction. In two steps, this installation will be expanded into a 300,000 SWU/a demonstration plant. The development of components for commercial plants is well under way. The paper describes developments and technical implementation of the separation nozzle process. Remarkable progress has been made in the process economy.

Process development for automated solar cell and module production. Task 4: Automated array assembly

NASA Technical Reports Server (NTRS)

1980-01-01

A process sequence which can be used in conjunction with automated equipment for the mass production of solar cell modules for terrestrial use was developed. The process sequence was then critically analyzed from a technical and economic standpoint to determine the technological readiness of certain process steps for implementation. The steps receiving analysis were: back contact metallization, automated cell array layup/interconnect, and module edge sealing. For automated layup/interconnect, both hard automation and programmable automation (using an industrial robot) were studied. The programmable automation system was then selected for actual hardware development.

Development of a Rolling Process Design Tool for Use in Improving Hot Roll Slab Recovery

DOE Office of Scientific and Technical Information (OSTI.GOV)

Couch, R; Becker, R; Rhee, M

2004-09-24

Lawrence Livermore National Laboratory participated in a U. S. Department of Energy/Office of Industrial Technology sponsored research project 'Development of a Rolling Process Design Tool for Use in Improving Hot Roll Slab Recovery', as a Cooperative Agreement TC-02028 with the Alcoa Technical Center (ATC). The objective of the joint project with Alcoa is to develop a numerical modeling capability to optimize the hot rolling process used to produce aluminum plate. Product lost in the rolling process and subsequent recycling, wastes resources consumed in the energy-intensive steps of remelting and reprocessing the ingot. The modeling capability developed by project partners willmore » be used to produce plate more efficiently and with reduced product loss.« less

Ecological Factors in Human Development.

PubMed

Cross, William E

2017-05-01

Urie Bronfenbrenner (1992) helped developmental psychologists comprehend and define "context" as a rich, thick multidimensional construct. His ecological systems theory consists of five layers, and within each layer are developmental processes unique to each layer. The four articles in this section limit the exploration of context to the three innermost systems: the individual plus micro- and macrolayers. Rather than examine both the physical features and processes, the articles tend to focus solely on processes associated with a niche. Processes explored include social identity development, social network dynamics, peer influences, and school-based friendship patterns. The works tend to extend the generalization of extant theory to the developmental experience of various minority group experiences. © 2017 The Authors. Child Development © 2017 Society for Research in Child Development, Inc.

Analyses of requirements for computer control and data processing experiment subsystems. Volume 1: ATM experiment S-056 image data processing system techniques development

NASA Technical Reports Server (NTRS)

1972-01-01

The solar imaging X-ray telescope experiment (designated the S-056 experiment) is described. It will photograph the sun in the far ultraviolet or soft X-ray region. Because of the imaging characteristics of this telescope and the necessity of using special techniques for capturing images on film at these wave lengths, methods were developed for computer processing of the photographs. The problems of image restoration were addressed to develop and test digital computer techniques for applying a deconvolution process to restore overall S-056 image quality. Additional techniques for reducing or eliminating the effects of noise and nonlinearity in S-056 photographs were developed.